Merge http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm into for-rmk

4684 files changed, 303831 insertions, 179087 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index 3ea332b009e5..364c6dadde0a 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -27,15 +27,65 @@ config KPROBES
 	  for kernel debugging, non-intrusive instrumentation and testing.
 	  If in doubt, say "N".
 
+config HAVE_EFFICIENT_UNALIGNED_ACCESS
+	def_bool n
+	help
+	  Some architectures are unable to perform unaligned accesses
+	  without the use of get_unaligned/put_unaligned. Others are
+	  unable to perform such accesses efficiently (e.g. trap on
+	  unaligned access and require fixing it up in the exception
+	  handler.)
+
+	  This symbol should be selected by an architecture if it can
+	  perform unaligned accesses efficiently to allow different
+	  code paths to be selected for these cases. Some network
+	  drivers, for example, could opt to not fix up alignment
+	  problems with received packets if doing so would not help
+	  much.
+
+	  See Documentation/unaligned-memory-access.txt for more
+	  information on the topic of unaligned memory accesses.
+
 config KRETPROBES
 	def_bool y
 	depends on KPROBES && HAVE_KRETPROBES
 
+config HAVE_IOREMAP_PROT
+	def_bool n
+
 config HAVE_KPROBES
 	def_bool n
 
 config HAVE_KRETPROBES
 	def_bool n
 
+#
+# An arch should select this if it provides all these things:
+#
+#	task_pt_regs()		in asm/processor.h or asm/ptrace.h
+#	arch_has_single_step()	if there is hardware single-step support
+#	arch_has_block_step()	if there is hardware block-step support
+#	arch_ptrace()		and not #define __ARCH_SYS_PTRACE
+#	compat_arch_ptrace()	and #define __ARCH_WANT_COMPAT_SYS_PTRACE
+#	asm/syscall.h		supplying asm-generic/syscall.h interface
+#	linux/regset.h		user_regset interfaces
+#	CORE_DUMP_USE_REGSET	#define'd in linux/elf.h
+#	TIF_SYSCALL_TRACE	calls tracehook_report_syscall_{entry,exit}
+#	TIF_NOTIFY_RESUME	calls tracehook_notify_resume()
+#	signal delivery		calls tracehook_signal_handler()
+#
+config HAVE_ARCH_TRACEHOOK
+	def_bool n
+
 config HAVE_DMA_ATTRS
 	def_bool n
+
+config USE_GENERIC_SMP_HELPERS
+	def_bool n
+
+config HAVE_CLK
+	def_bool n
+	help
+	  The <linux/clk.h> calls support software clock gating and
+	  thus are a key power management tool on many systems.
+
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 729cdbdf8036..1bec55d63ef6 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -333,11 +333,6 @@ config PCI_SYSCALL
 config IOMMU_HELPER
 	def_bool PCI
 
-config ALPHA_CORE_AGP
-	bool
-	depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL
-	default y
-
 config ALPHA_NONAME
 	bool
 	depends on ALPHA_BOOK1 || ALPHA_NONAME_CH
@@ -528,6 +523,7 @@ config ARCH_MAY_HAVE_PC_FDC
 config SMP
 	bool "Symmetric multi-processing support"
 	depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
+	select USE_GENERIC_SMP_HELPERS
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
diff --git a/arch/alpha/boot/misc.c b/arch/alpha/boot/misc.c
index c00646b25f6e..3047a1b3a517 100644
--- a/arch/alpha/boot/misc.c
+++ b/arch/alpha/boot/misc.c
@@ -78,8 +78,6 @@ static unsigned outcnt;		/* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static char *input_data;
 static int  input_data_size;
@@ -88,51 +86,18 @@ static uch *output_data;
 static ulg output_ptr;
 static ulg bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
 static void gzip_mark(void **);
 static void gzip_release(void **);
 
 extern int end;
 static ulg free_mem_ptr;
-static ulg free_mem_ptr_end;
+static ulg free_mem_end_ptr;
 
 #define HEAP_SIZE 0x3000
 
 #include "../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr <= 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_ptr_end)
-		error("Out of memory");
-	return p;
-}
-
-static void free(void *where)
-{ /* gzip_mark & gzip_release do the free */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 /* ===========================================================================
  * Fill the input buffer. This is called only when the buffer is empty
  * and at least one byte is really needed.
@@ -193,7 +158,7 @@ decompress_kernel(void *output_start,
 
 	/* FIXME FIXME FIXME */
 	free_mem_ptr		= (ulg)output_start + ksize;
-	free_mem_ptr_end	= (ulg)output_start + ksize + 0x200000;
+	free_mem_end_ptr	= (ulg)output_start + ksize + 0x200000;
 	/* FIXME FIXME FIXME */
 
 	/* put in temp area to reduce initial footprint */
diff --git a/arch/alpha/kernel/core_marvel.c b/arch/alpha/kernel/core_marvel.c
index b04f1feb1dda..04dcc5e5d4c1 100644
--- a/arch/alpha/kernel/core_marvel.c
+++ b/arch/alpha/kernel/core_marvel.c
@@ -660,9 +660,9 @@ __marvel_rtc_io(u8 b, unsigned long addr, int write)
 
 #ifdef CONFIG_SMP
 		if (smp_processor_id() != boot_cpuid)
-			smp_call_function_on_cpu(__marvel_access_rtc,
-						 &rtc_access, 1, 1,
-						 cpumask_of_cpu(boot_cpuid));
+			smp_call_function_single(boot_cpuid,
+						 __marvel_access_rtc,
+						 &rtc_access, 1);
 		else
 			__marvel_access_rtc(&rtc_access);
 #else
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 32ca1b927307..6e943135f0e0 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -253,15 +253,15 @@ do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer,
 }
 
 asmlinkage int
-osf_statfs(char __user *path, struct osf_statfs __user *buffer, unsigned long bufsiz)
+osf_statfs(char __user *pathname, struct osf_statfs __user *buffer, unsigned long bufsiz)
 {
-	struct nameidata nd;
+	struct path path;
 	int retval;
 
-	retval = user_path_walk(path, &nd);
+	retval = user_path(pathname, &path);
 	if (!retval) {
-		retval = do_osf_statfs(nd.path.dentry, buffer, bufsiz);
-		path_put(&nd.path);
+		retval = do_osf_statfs(path.dentry, buffer, bufsiz);
+		path_put(&path);
 	}
 	return retval;
 }
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index 96ed82fd9eef..351407e07e71 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -160,7 +160,7 @@ common_shutdown(int mode, char *restart_cmd)
 	struct halt_info args;
 	args.mode = mode;
 	args.restart_cmd = restart_cmd;
-	on_each_cpu(common_shutdown_1, &args, 1, 0);
+	on_each_cpu(common_shutdown_1, &args, 0);
 }
 
 void
diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c
index 2525692db0ab..83df541650fc 100644
--- a/arch/alpha/kernel/smp.c
+++ b/arch/alpha/kernel/smp.c
@@ -62,6 +62,7 @@ static struct {
 enum ipi_message_type {
 	IPI_RESCHEDULE,
 	IPI_CALL_FUNC,
+	IPI_CALL_FUNC_SINGLE,
 	IPI_CPU_STOP,
 };
 
@@ -558,51 +559,6 @@ send_ipi_message(cpumask_t to_whom, enum ipi_message_type operation)
 		wripir(i);
 }
 
-/* Structure and data for smp_call_function.  This is designed to 
-   minimize static memory requirements.  Plus it looks cleaner.  */
-
-struct smp_call_struct {
-	void (*func) (void *info);
-	void *info;
-	long wait;
-	atomic_t unstarted_count;
-	atomic_t unfinished_count;
-};
-
-static struct smp_call_struct *smp_call_function_data;
-
-/* Atomicly drop data into a shared pointer.  The pointer is free if
-   it is initially locked.  If retry, spin until free.  */
-
-static int
-pointer_lock (void *lock, void *data, int retry)
-{
-	void *old, *tmp;
-
-	mb();
- again:
-	/* Compare and swap with zero.  */
-	asm volatile (
-	"1:	ldq_l	%0,%1\n"
-	"	mov	%3,%2\n"
-	"	bne	%0,2f\n"
-	"	stq_c	%2,%1\n"
-	"	beq	%2,1b\n"
-	"2:"
-	: "=&r"(old), "=m"(*(void **)lock), "=&r"(tmp)
-	: "r"(data)
-	: "memory");
-
-	if (old == 0)
-		return 0;
-	if (! retry)
-		return -EBUSY;
-
-	while (*(void **)lock)
-		barrier();
-	goto again;
-}
-
 void
 handle_ipi(struct pt_regs *regs)
 {
@@ -632,31 +588,12 @@ handle_ipi(struct pt_regs *regs)
 			break;
 
 		case IPI_CALL_FUNC:
-		    {
-			struct smp_call_struct *data;
-			void (*func)(void *info);
-			void *info;
-			int wait;
-
-			data = smp_call_function_data;
-			func = data->func;
-			info = data->info;
-			wait = data->wait;
-
-			/* Notify the sending CPU that the data has been
-			   received, and execution is about to begin.  */
-			mb();
-			atomic_dec (&data->unstarted_count);
-
-			/* At this point the structure may be gone unless
-			   wait is true.  */
-			(*func)(info);
-
-			/* Notify the sending CPU that the task is done.  */
-			mb();
-			if (wait) atomic_dec (&data->unfinished_count);
+			generic_smp_call_function_interrupt();
+			break;
+
+		case IPI_CALL_FUNC_SINGLE:
+			generic_smp_call_function_single_interrupt();
 			break;
-		    }
 
 		case IPI_CPU_STOP:
 			halt();
@@ -700,102 +637,15 @@ smp_send_stop(void)
 	send_ipi_message(to_whom, IPI_CPU_STOP);
 }
 
-/*
- * Run a function on all other CPUs.
- *  <func>	The function to run. This must be fast and non-blocking.
- *  <info>	An arbitrary pointer to pass to the function.
- *  <retry>	If true, keep retrying until ready.
- *  <wait>	If true, wait until function has completed on other CPUs.
- *  [RETURNS]   0 on success, else a negative status code.
- *
- * Does not return until remote CPUs are nearly ready to execute <func>
- * or are or have executed.
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-
-int
-smp_call_function_on_cpu (void (*func) (void *info), void *info, int retry,
-			  int wait, cpumask_t to_whom)
+void arch_send_call_function_ipi(cpumask_t mask)
 {
-	struct smp_call_struct data;
-	unsigned long timeout;
-	int num_cpus_to_call;
-	
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	data.func = func;
-	data.info = info;
-	data.wait = wait;
-
-	cpu_clear(smp_processor_id(), to_whom);
-	num_cpus_to_call = cpus_weight(to_whom);
-
-	atomic_set(&data.unstarted_count, num_cpus_to_call);
-	atomic_set(&data.unfinished_count, num_cpus_to_call);
-
-	/* Acquire the smp_call_function_data mutex.  */
-	if (pointer_lock(&smp_call_function_data, &data, retry))
-		return -EBUSY;
-
-	/* Send a message to the requested CPUs.  */
-	send_ipi_message(to_whom, IPI_CALL_FUNC);
-
-	/* Wait for a minimal response.  */
-	timeout = jiffies + HZ;
-	while (atomic_read (&data.unstarted_count) > 0
-	       && time_before (jiffies, timeout))
-		barrier();
-
-	/* If there's no response yet, log a message but allow a longer
-	 * timeout period -- if we get a response this time, log
-	 * a message saying when we got it.. 
-	 */
-	if (atomic_read(&data.unstarted_count) > 0) {
-		long start_time = jiffies;
-		printk(KERN_ERR "%s: initial timeout -- trying long wait\n",
-		       __func__);
-		timeout = jiffies + 30 * HZ;
-		while (atomic_read(&data.unstarted_count) > 0
-		       && time_before(jiffies, timeout))
-			barrier();
-		if (atomic_read(&data.unstarted_count) <= 0) {
-			long delta = jiffies - start_time;
-			printk(KERN_ERR 
-			       "%s: response %ld.%ld seconds into long wait\n",
-			       __func__, delta / HZ,
-			       (100 * (delta - ((delta / HZ) * HZ))) / HZ);
-		}
-	}
-
-	/* We either got one or timed out -- clear the lock. */
-	mb();
-	smp_call_function_data = NULL;
-
-	/* 
-	 * If after both the initial and long timeout periods we still don't
-	 * have a response, something is very wrong...
-	 */
-	BUG_ON(atomic_read (&data.unstarted_count) > 0);
-
-	/* Wait for a complete response, if needed.  */
-	if (wait) {
-		while (atomic_read (&data.unfinished_count) > 0)
-			barrier();
-	}
-
-	return 0;
+	send_ipi_message(mask, IPI_CALL_FUNC);
 }
-EXPORT_SYMBOL(smp_call_function_on_cpu);
 
-int
-smp_call_function (void (*func) (void *info), void *info, int retry, int wait)
+void arch_send_call_function_single_ipi(int cpu)
 {
-	return smp_call_function_on_cpu (func, info, retry, wait,
-					 cpu_online_map);
+	send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
 }
-EXPORT_SYMBOL(smp_call_function);
 
 static void
 ipi_imb(void *ignored)
@@ -807,7 +657,7 @@ void
 smp_imb(void)
 {
 	/* Must wait other processors to flush their icache before continue. */
-	if (on_each_cpu(ipi_imb, NULL, 1, 1))
+	if (on_each_cpu(ipi_imb, NULL, 1))
 		printk(KERN_CRIT "smp_imb: timed out\n");
 }
 EXPORT_SYMBOL(smp_imb);
@@ -823,7 +673,7 @@ flush_tlb_all(void)
 {
 	/* Although we don't have any data to pass, we do want to
 	   synchronize with the other processors.  */
-	if (on_each_cpu(ipi_flush_tlb_all, NULL, 1, 1)) {
+	if (on_each_cpu(ipi_flush_tlb_all, NULL, 1)) {
 		printk(KERN_CRIT "flush_tlb_all: timed out\n");
 	}
 }
@@ -860,7 +710,7 @@ flush_tlb_mm(struct mm_struct *mm)
 		}
 	}
 
-	if (smp_call_function(ipi_flush_tlb_mm, mm, 1, 1)) {
+	if (smp_call_function(ipi_flush_tlb_mm, mm, 1)) {
 		printk(KERN_CRIT "flush_tlb_mm: timed out\n");
 	}
 
@@ -913,7 +763,7 @@ flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
 	data.mm = mm;
 	data.addr = addr;
 
-	if (smp_call_function(ipi_flush_tlb_page, &data, 1, 1)) {
+	if (smp_call_function(ipi_flush_tlb_page, &data, 1)) {
 		printk(KERN_CRIT "flush_tlb_page: timed out\n");
 	}
 
@@ -965,7 +815,7 @@ flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
 		}
 	}
 
-	if (smp_call_function(ipi_flush_icache_page, mm, 1, 1)) {
+	if (smp_call_function(ipi_flush_icache_page, mm, 1)) {
 		printk(KERN_CRIT "flush_icache_page: timed out\n");
 	}
 
diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c
index 40c15e7301de..234e42b8ee74 100644
--- a/arch/alpha/mm/init.c
+++ b/arch/alpha/mm/init.c
@@ -94,36 +94,6 @@ __bad_page(void)
 	return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED));
 }
 
-#ifndef CONFIG_DISCONTIGMEM
-void
-show_mem(void)
-{
-	long i,free = 0,total = 0,reserved = 0;
-	long shared = 0, cached = 0;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map+i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk("%ld pages of RAM\n",total);
-	printk("%ld free pages\n",free);
-	printk("%ld reserved pages\n",reserved);
-	printk("%ld pages shared\n",shared);
-	printk("%ld pages swap cached\n",cached);
-}
-#endif
-
 static inline unsigned long
 load_PCB(struct pcb_struct *pcb)
 {
diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c
index 10ab7833e83c..a13de49d1265 100644
--- a/arch/alpha/mm/numa.c
+++ b/arch/alpha/mm/numa.c
@@ -19,7 +19,6 @@
 #include <asm/pgalloc.h>
 
 pg_data_t node_data[MAX_NUMNODES];
-bootmem_data_t node_bdata[MAX_NUMNODES];
 EXPORT_SYMBOL(node_data);
 
 #undef DEBUG_DISCONTIG
@@ -141,7 +140,7 @@ setup_memory_node(int nid, void *kernel_end)
 		printk(" not enough mem to reserve NODE_DATA");
 		return;
 	}
-	NODE_DATA(nid)->bdata = &node_bdata[nid];
+	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 
 	printk(" Detected node memory:   start %8lu, end %8lu\n",
 	       node_min_pfn, node_max_pfn);
@@ -304,8 +303,9 @@ void __init paging_init(void)
 	dma_local_pfn = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
 
 	for_each_online_node(nid) {
-		unsigned long start_pfn = node_bdata[nid].node_boot_start >> PAGE_SHIFT;
-		unsigned long end_pfn = node_bdata[nid].node_low_pfn;
+		bootmem_data_t *bdata = &bootmem_node_data[nid];
+		unsigned long start_pfn = bdata->node_min_pfn;
+		unsigned long end_pfn = bdata->node_low_pfn;
 
 		if (dma_local_pfn >= end_pfn - start_pfn)
 			zones_size[ZONE_DMA] = end_pfn - start_pfn;
@@ -313,7 +313,7 @@ void __init paging_init(void)
 			zones_size[ZONE_DMA] = dma_local_pfn;
 			zones_size[ZONE_NORMAL] = (end_pfn - start_pfn) - dma_local_pfn;
 		}
-		free_area_init_node(nid, NODE_DATA(nid), zones_size, start_pfn, NULL);
+		free_area_init_node(nid, zones_size, start_pfn, NULL);
 	}
 
 	/* Initialize the kernel's ZERO_PGE. */
@@ -359,38 +359,3 @@ void __init mem_init(void)
 	mem_stress();
 #endif
 }
-
-void
-show_mem(void)
-{
-	long i,free = 0,total = 0,reserved = 0;
-	long shared = 0, cached = 0;
-	int nid;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	for_each_online_node(nid) {
-		unsigned long flags;
-		pgdat_resize_lock(NODE_DATA(nid), &flags);
-		i = node_spanned_pages(nid);
-		while (i-- > 0) {
-			struct page *page = nid_page_nr(nid, i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(NODE_DATA(nid), &flags);
-	}
-	printk("%ld pages of RAM\n",total);
-	printk("%ld free pages\n",free);
-	printk("%ld reserved pages\n",reserved);
-	printk("%ld pages shared\n",shared);
-	printk("%ld pages swap cached\n",cached);
-}
diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c
index 9fc0eeb4f0ab..7c3d5ec6ec67 100644
--- a/arch/alpha/oprofile/common.c
+++ b/arch/alpha/oprofile/common.c
@@ -65,7 +65,7 @@ op_axp_setup(void)
 	model->reg_setup(&reg, ctr, &sys);
 
 	/* Configure the registers on all cpus.  */
-	(void)smp_call_function(model->cpu_setup, &reg, 0, 1);
+	(void)smp_call_function(model->cpu_setup, &reg, 1);
 	model->cpu_setup(&reg);
 	return 0;
 }
@@ -86,7 +86,7 @@ op_axp_cpu_start(void *dummy)
 static int
 op_axp_start(void)
 {
-	(void)smp_call_function(op_axp_cpu_start, NULL, 0, 1);
+	(void)smp_call_function(op_axp_cpu_start, NULL, 1);
 	op_axp_cpu_start(NULL);
 	return 0;
 }
@@ -101,7 +101,7 @@ op_axp_cpu_stop(void *dummy)
 static void
 op_axp_stop(void)
 {
-	(void)smp_call_function(op_axp_cpu_stop, NULL, 0, 1);
+	(void)smp_call_function(op_axp_cpu_stop, NULL, 1);
 	op_axp_cpu_stop(NULL);
 }
 
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 258f1369fb0c..4b8acd2851f4 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -12,10 +12,12 @@ config ARM
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION
 	select HAVE_OPROFILE
+	select HAVE_ARCH_KGDB
 	select HAVE_KPROBES if (!XIP_KERNEL)
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_FTRACE if (!XIP_KERNEL)
 	select HAVE_DYNAMIC_FTRACE if (HAVE_FTRACE)
+	select HAVE_GENERIC_DMA_COHERENT
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -197,12 +199,14 @@ choice
 config ARCH_AAEC2000
 	bool "Agilent AAEC-2000 based"
 	select ARM_AMBA
+	select HAVE_CLK
 	help
 	  This enables support for systems based on the Agilent AAEC-2000
 
 config ARCH_INTEGRATOR
 	bool "ARM Ltd. Integrator family"
 	select ARM_AMBA
+	select HAVE_CLK
 	select ICST525
 	help
 	  Support for ARM's Integrator platform.
@@ -210,6 +214,7 @@ config ARCH_INTEGRATOR
 config ARCH_REALVIEW
 	bool "ARM Ltd. RealView family"
 	select ARM_AMBA
+	select HAVE_CLK
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -220,6 +225,7 @@ config ARCH_VERSATILE
 	bool "ARM Ltd. Versatile family"
 	select ARM_AMBA
 	select ARM_VIC
+	select HAVE_CLK
 	select ICST307
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -229,6 +235,7 @@ config ARCH_VERSATILE
 config ARCH_AT91
 	bool "Atmel AT91"
 	select GENERIC_GPIO
+	select HAVE_CLK
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 and AT91CAP9 processors.
@@ -261,7 +268,8 @@ config ARCH_EP93XX
 	select ARM_AMBA
 	select ARM_VIC
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select HAVE_CLK
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -307,7 +315,7 @@ config ARCH_IOP32X
 	select PLAT_IOP
 	select PCI
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Intel's 80219 and IOP32X (XScale) family of
 	  processors.
@@ -318,7 +326,7 @@ config ARCH_IOP33X
 	select PLAT_IOP
 	select PCI
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Intel's IOP33X (XScale) family of processors.
 
@@ -380,6 +388,7 @@ config ARCH_NS9XXX
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
 	help
 	  Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
 	  System.
@@ -410,7 +419,7 @@ config ARCH_MXC
 	select GENERIC_CLOCKEVENTS
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
@@ -429,6 +438,7 @@ config ARCH_ORION5X
 
 config ARCH_PNX4008
 	bool "Philips Nexperia PNX4008 Mobile"
+	select HAVE_CLK
 	help
 	  This enables support for Philips PNX4008 mobile platform.
 
@@ -437,7 +447,8 @@ config ARCH_PXA
 	depends on MMU
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select HAVE_CLK
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
@@ -467,14 +478,16 @@ config ARCH_SA1100
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_CLK
 	select TICK_ONESHOT
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
 	bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
 	select GENERIC_GPIO
+	select HAVE_CLK
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -502,13 +515,15 @@ config ARCH_DAVINCI
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
+	select HAVE_CLK
 	help
 	  Support for TI's DaVinci platform.
 
 config ARCH_OMAP
 	bool "TI OMAP"
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select HAVE_CLK
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	help
@@ -701,6 +716,7 @@ source "kernel/time/Kconfig"
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
+	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1209,6 +1225,8 @@ source "drivers/dma/Kconfig"
 
 source "drivers/dca/Kconfig"
 
+source "drivers/regulator/Kconfig"
+
 source "drivers/uio/Kconfig"
 
 endmenu
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index b20995a82e04..703a44fa0f9b 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -67,7 +67,7 @@ tune-$(CONFIG_CPU_ARM720T)	:=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM740T)	:=-mtune=arm7tdmi
 tune-$(CONFIG_CPU_ARM9TDMI)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM940T)	:=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946T)	:=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
+tune-$(CONFIG_CPU_ARM946E)	:=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
 tune-$(CONFIG_CPU_ARM920T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM925T)	:=-mtune=arm9tdmi
@@ -97,9 +97,7 @@ textofs-y	:= 0x00008000
  machine-$(CONFIG_ARCH_RPC)	   := rpc
  machine-$(CONFIG_ARCH_EBSA110)	   := ebsa110
  machine-$(CONFIG_ARCH_CLPS7500)   := clps7500
-  incdir-$(CONFIG_ARCH_CLPS7500)   := cl7500
  machine-$(CONFIG_FOOTBRIDGE)	   := footbridge
-  incdir-$(CONFIG_FOOTBRIDGE)	   := ebsa285
  machine-$(CONFIG_ARCH_SHARK)	   := shark
  machine-$(CONFIG_ARCH_SA1100)	   := sa1100
 ifeq ($(CONFIG_ARCH_SA1100),y)
@@ -114,13 +112,15 @@ endif
  machine-$(CONFIG_ARCH_IOP32X)	   := iop32x
  machine-$(CONFIG_ARCH_IOP33X)	   := iop33x
  machine-$(CONFIG_ARCH_IOP13XX)	   := iop13xx
+    plat-$(CONFIG_PLAT_IOP)	   := iop
  machine-$(CONFIG_ARCH_IXP4XX)	   := ixp4xx
  machine-$(CONFIG_ARCH_IXP2000)    := ixp2000
  machine-$(CONFIG_ARCH_IXP23XX)    := ixp23xx
  machine-$(CONFIG_ARCH_OMAP1)	   := omap1
  machine-$(CONFIG_ARCH_OMAP2)	   := omap2
-  incdir-$(CONFIG_ARCH_OMAP)	   := omap
- machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410
+    plat-$(CONFIG_ARCH_OMAP)	   := omap
+ machine-$(CONFIG_ARCH_S3C2410)	   := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+    plat-$(CONFIG_PLAT_S3C24XX)	   := s3c24xx
  machine-$(CONFIG_ARCH_LH7A40X)	   := lh7a40x
  machine-$(CONFIG_ARCH_VERSATILE)  := versatile
  machine-$(CONFIG_ARCH_IMX)	   := imx
@@ -135,10 +135,11 @@ endif
  machine-$(CONFIG_ARCH_DAVINCI)	   := davinci
  machine-$(CONFIG_ARCH_KIRKWOOD)   := kirkwood
  machine-$(CONFIG_ARCH_KS8695)     := ks8695
-  incdir-$(CONFIG_ARCH_MXC)	   := mxc
+    plat-$(CONFIG_ARCH_MXC)	   := mxc
  machine-$(CONFIG_ARCH_MX2)	   := mx2
  machine-$(CONFIG_ARCH_MX3)	   := mx3
  machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
+    plat-$(CONFIG_PLAT_ORION)	   := orion
  machine-$(CONFIG_ARCH_MSM7X00A)   := msm
  machine-$(CONFIG_ARCH_LOKI)       := loki
  machine-$(CONFIG_ARCH_MV78XX0)    := mv78xx0
@@ -153,17 +154,22 @@ endif
 # The byte offset of the kernel image in RAM from the start of RAM.
 TEXT_OFFSET := $(textofs-y)
 
-ifeq ($(incdir-y),)
-incdir-y := $(machine-y)
-endif
-INCDIR   := arch-$(incdir-y)
-
+# The first directory contains additional information for the boot setup code
 ifneq ($(machine-y),)
-MACHINE  := arch/arm/mach-$(machine-y)/
+MACHINE  := arch/arm/mach-$(word 1,$(machine-y))/
 else
 MACHINE  :=
 endif
 
+machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
+platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y))
+
+ifeq ($(KBUILD_SRC),)
+KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
+else
+KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
+endif
+
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
 # Do we have FASTFPE?
@@ -174,23 +180,11 @@ endif
 
 # If we have a machine-specific directory, then include it in the build.
 core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
-core-y				+= $(MACHINE)
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2400/
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2412/
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2440/
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2442/
-core-$(CONFIG_ARCH_S3C2410)	+= arch/arm/mach-s3c2443/
+core-y				+= $(machdirs) $(platdirs)
 core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
 core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
 core-$(CONFIG_VFP)		+= arch/arm/vfp/
 
-# If we have a common platform directory, then include it in the build.
-core-$(CONFIG_PLAT_IOP)		+= arch/arm/plat-iop/
-core-$(CONFIG_PLAT_ORION)		+= arch/arm/plat-orion/
-core-$(CONFIG_ARCH_OMAP)	+= arch/arm/plat-omap/
-core-$(CONFIG_PLAT_S3C24XX)		+= arch/arm/plat-s3c24xx/
-core-$(CONFIG_ARCH_MXC)		+= arch/arm/plat-mxc/
-
 drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
@@ -210,20 +204,10 @@ boot := arch/arm/boot
 #	them changed.  We use .arch to indicate when they were updated
 #	last, otherwise make uses the target directory mtime.
 
-include/asm-arm/.arch: $(wildcard include/config/arch/*.h) include/config/auto.conf
-	@echo '  SYMLINK include/asm-arm/arch -> include/asm-arm/$(INCDIR)'
-ifneq ($(KBUILD_SRC),)
-	$(Q)mkdir -p include/asm-arm
-	$(Q)ln -fsn $(srctree)/include/asm-arm/$(INCDIR) include/asm-arm/arch
-else
-	$(Q)ln -fsn $(INCDIR) include/asm-arm/arch
-endif
-	@touch $@
-
 archprepare: maketools
 
 PHONY += maketools FORCE
-maketools: include/linux/version.h include/asm-arm/.arch FORCE
+maketools: include/linux/version.h FORCE
 	$(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h
 
 # Convert bzImage to zImage
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 95baac4939e0..94462a097f86 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -112,6 +112,3 @@ $(obj)/font.c: $(FONTC)
 
 $(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile .config
 	@sed "$(SEDFLAGS)" < $< > $@
-
-$(obj)/misc.o: $(obj)/misc.c include/asm/arch/uncompress.h lib/inflate.c
-
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index dd3fbd6766e1..aa5ee49c5c5a 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -6,7 +6,6 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/mach-types.h>
 
 		.section        ".start", "ax"
 
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index de41daeab5e9..d42f89b7760b 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -37,7 +37,7 @@
 
 #else
 
-#include <asm/arch/debug-macro.S>
+#include <mach/debug-macro.S>
 
 		.macro	writeb,	ch, rb
 		senduart \ch, \rb
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 9b444022cb9b..65ce8fff29db 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -27,7 +27,7 @@ unsigned int __machine_arch_type;
 static void putstr(const char *ptr);
 
 #include <linux/compiler.h>
-#include <asm/arch/uncompress.h>
+#include <mach/uncompress.h>
 
 #ifdef CONFIG_DEBUG_ICEDCC
 
@@ -217,8 +217,6 @@ static unsigned outcnt;		/* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern char input_data_end[];
@@ -227,64 +225,21 @@ static uch *output_data;
 static ulg output_ptr;
 static ulg bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void putstr(const char *);
 
 extern int end;
 static ulg free_mem_ptr;
-static ulg free_mem_ptr_end;
+static ulg free_mem_end_ptr;
 
-#define HEAP_SIZE 0x3000
-
-#include "../../../../lib/inflate.c"
-
-#ifndef STANDALONE_DEBUG
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr <= 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_ptr_end)
-		error("Out of memory");
-	return p;
-}
-
-static void free(void *where)
-{ /* gzip_mark & gzip_release do the free */
-}
-
-static void gzip_mark(void **ptr)
-{
-	arch_decomp_wdog();
-	*ptr = (void *) free_mem_ptr;
-}
+#ifdef STANDALONE_DEBUG
+#define NO_INFLATE_MALLOC
+#endif
 
-static void gzip_release(void **ptr)
-{
-	arch_decomp_wdog();
-	free_mem_ptr = (long) *ptr;
-}
-#else
-static void gzip_mark(void **ptr)
-{
-}
+#define ARCH_HAS_DECOMP_WDOG
 
-static void gzip_release(void **ptr)
-{
-}
-#endif
+#include "../../../../lib/inflate.c"
 
 /* ===========================================================================
  * Fill the input buffer. This is called only when the buffer is empty
@@ -348,7 +303,7 @@ decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
 {
 	output_data		= (uch *)output_start;	/* Points to kernel start */
 	free_mem_ptr		= free_mem_ptr_p;
-	free_mem_ptr_end	= free_mem_ptr_end_p;
+	free_mem_end_ptr	= free_mem_ptr_end_p;
 	__machine_arch_type	= arch_id;
 
 	arch_decomp_setup();
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 2744673314b4..69130f365904 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -280,7 +280,7 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 	/*
 	 * Trying to unmap an invalid mapping
 	 */
-	if (dma_mapping_error(dma_addr)) {
+	if (dma_mapping_error(dev, dma_addr)) {
 		dev_err(dev, "Trying to unmap invalid mapping\n");
 		return;
 	}
@@ -554,9 +554,8 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 
 	device_info = kmalloc(sizeof(struct dmabounce_device_info), GFP_ATOMIC);
 	if (!device_info) {
-		printk(KERN_ERR
-			"Could not allocated dmabounce_device_info for %s",
-			dev->bus_id);
+		dev_err(dev,
+			"Could not allocated dmabounce_device_info\n");
 		return -ENOMEM;
 	}
 
@@ -594,8 +593,7 @@ dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
 
 	dev->archdata.dmabounce = device_info;
 
-	printk(KERN_INFO "dmabounce: registered device %s on %s bus\n",
-		dev->bus_id, dev->bus->name);
+	dev_info(dev, "dmabounce: registered device\n");
 
 	return 0;
 
@@ -614,16 +612,15 @@ dmabounce_unregister_dev(struct device *dev)
 	dev->archdata.dmabounce = NULL;
 
 	if (!device_info) {
-		printk(KERN_WARNING
-			"%s: Never registered with dmabounce but attempting" \
-			"to unregister!\n", dev->bus_id);
+		dev_warn(dev,
+			 "Never registered with dmabounce but attempting"
+			 "to unregister!\n");
 		return;
 	}
 
 	if (!list_empty(&device_info->safe_buffers)) {
-		printk(KERN_ERR
-			"%s: Removing from dmabounce with pending buffers!\n",
-			dev->bus_id);
+		dev_err(dev,
+			"Removing from dmabounce with pending buffers!\n");
 		BUG();
 	}
 
@@ -639,8 +636,7 @@ dmabounce_unregister_dev(struct device *dev)
 
 	kfree(device_info);
 
-	printk(KERN_INFO "dmabounce: device %s on %s bus unregistered\n",
-		dev->bus_id, dev->bus->name);
+	dev_info(dev, "dmabounce: device unregistered\n");
 }
 
 
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index d973c986f721..283051eaf931 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -25,7 +25,7 @@
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
@@ -331,17 +331,17 @@ static int locomo_gpio_type(unsigned int irq, unsigned int type)
 
 	mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
 
-	if (type == IRQT_PROBE) {
+	if (type == IRQ_TYPE_PROBE) {
 		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
 			return 0;
-		type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
-	if (type & __IRQT_RISEDGE)
+	if (type & IRQ_TYPE_EDGE_RISING)
 		GPIO_IRQ_rising_edge |= mask;
 	else
 		GPIO_IRQ_rising_edge &= ~mask;
-	if (type & __IRQT_FALEDGE)
+	if (type & IRQ_TYPE_EDGE_FALLING)
 		GPIO_IRQ_falling_edge |= mask;
 	else
 		GPIO_IRQ_falling_edge &= ~mask;
@@ -473,7 +473,7 @@ static void locomo_setup_irq(struct locomo *lchip)
 	/*
 	 * Install handler for IRQ_LOCOMO_HW.
 	 */
-	set_irq_type(lchip->irq, IRQT_FALLING);
+	set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
 	set_irq_chip_data(lchip->irq, irqbase);
 	set_irq_chained_handler(lchip->irq, locomo_handler);
 
@@ -543,7 +543,6 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
 		goto out;
 	}
 
-	strncpy(dev->dev.bus_id, info->name, sizeof(dev->dev.bus_id));
 	/*
 	 * If the parent device has a DMA mask associated with it,
 	 * propagate it down to the children.
@@ -553,6 +552,7 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
 		dev->dev.dma_mask = &dev->dma_mask;
 	}
 
+	dev_set_name(&dev->dev, "%s", info->name);
 	dev->devid	 = info->devid;
 	dev->dev.parent  = lchip->dev;
 	dev->dev.bus     = &locomo_bus_type;
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index eb06d0b2cb74..ec8a5471bf06 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -26,7 +26,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/io.h>
 #include <asm/irq.h>
@@ -241,14 +241,14 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags)
 	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip0;
 
-	if (flags == IRQT_PROBE)
+	if (flags == IRQ_TYPE_PROBE)
 		return 0;
 
-	if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0)
+	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
 		return -EINVAL;
 
 	ip0 = sa1111_readl(mapbase + SA1111_INTPOL0);
-	if (flags & __IRQT_RISEDGE)
+	if (flags & IRQ_TYPE_EDGE_RISING)
 		ip0 &= ~mask;
 	else
 		ip0 |= mask;
@@ -338,14 +338,14 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags)
 	void __iomem *mapbase = get_irq_chip_data(irq);
 	unsigned long ip1;
 
-	if (flags == IRQT_PROBE)
+	if (flags == IRQ_TYPE_PROBE)
 		return 0;
 
-	if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0)
+	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
 		return -EINVAL;
 
 	ip1 = sa1111_readl(mapbase + SA1111_INTPOL1);
-	if (flags & __IRQT_RISEDGE)
+	if (flags & IRQ_TYPE_EDGE_RISING)
 		ip1 &= ~mask;
 	else
 		ip1 |= mask;
@@ -427,7 +427,7 @@ static void sa1111_setup_irq(struct sa1111 *sachip)
 	/*
 	 * Register SA1111 interrupt
 	 */
-	set_irq_type(sachip->irq, IRQT_RISING);
+	set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
 	set_irq_data(sachip->irq, irqbase);
 	set_irq_chained_handler(sachip->irq, sa1111_irq_handler);
 }
@@ -550,9 +550,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 		goto out;
 	}
 
-	snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id),
-		 "%4.4lx", info->offset);
-
+	dev_set_name(&dev->dev, "%4.4lx", info->offset);
 	dev->devid	 = info->devid;
 	dev->dev.parent  = sachip->dev;
 	dev->dev.bus     = &sa1111_bus_type;
@@ -560,7 +558,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 	dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
 	dev->res.start   = sachip->phys + info->offset;
 	dev->res.end     = dev->res.start + 511;
-	dev->res.name    = dev->dev.bus_id;
+	dev->res.name    = dev_name(&dev->dev);
 	dev->res.flags   = IORESOURCE_MEM;
 	dev->mapbase     = sachip->base + info->offset;
 	dev->skpcr_mask  = info->skpcr_mask;
@@ -570,6 +568,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 	if (ret) {
 		printk("SA1111: failed to allocate resource for %s\n",
 			dev->res.name);
+		dev_set_name(&dev->dev, NULL);
 		kfree(dev);
 		goto out;
 	}
@@ -593,7 +592,8 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
 		if (dev->dma_mask != 0xffffffffUL) {
 			ret = dmabounce_register_dev(&dev->dev, 1024, 4096);
 			if (ret) {
-				printk("SA1111: Failed to register %s with dmabounce", dev->dev.bus_id);
+				dev_err(&dev->dev, "SA1111: Failed to register"
+					" with dmabounce\n");
 				device_unregister(&dev->dev);
 			}
 		}
@@ -627,7 +627,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	if (!sachip)
 		return -ENOMEM;
 
-	sachip->clk = clk_get(me, "GPIO27_CLK");
+	sachip->clk = clk_get(me, "SA1111_CLK");
 	if (!sachip->clk) {
 		ret = PTR_ERR(sachip->clk);
 		goto err_free;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index bc299b07a6fa..ae39553589dd 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -247,7 +247,7 @@ static int __devinit scoop_probe(struct platform_device *pdev)
 	devptr->gpio.base = -1;
 
 	if (inf->gpio_base != 0) {
-		devptr->gpio.label = pdev->dev.bus_id;
+		devptr->gpio.label = dev_name(&pdev->dev);
 		devptr->gpio.base = inf->gpio_base;
 		devptr->gpio.ngpio = 12; /* PA11 = 0, PA12 = 1, etc. up to PA22 = 11 */
 		devptr->gpio.set = scoop_gpio_set;
diff --git a/arch/arm/common/sharpsl_pm.c b/arch/arm/common/sharpsl_pm.c
index 8822b684d474..db8309161408 100644
--- a/arch/arm/common/sharpsl_pm.c
+++ b/arch/arm/common/sharpsl_pm.c
@@ -26,13 +26,12 @@
 #include <linux/apm-emulation.h>
 #include <linux/suspend.h>
 
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/sharpsl.h>
 #include <asm/hardware/sharpsl_pm.h>
 
 /*
diff --git a/arch/arm/common/time-acorn.c b/arch/arm/common/time-acorn.c
index d544da414731..df0983aafe69 100644
--- a/arch/arm/common/time-acorn.c
+++ b/arch/arm/common/time-acorn.c
@@ -18,7 +18,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/hardware/ioc.h>
 
diff --git a/arch/arm/common/uengine.c b/arch/arm/common/uengine.c
index 117cab30bd36..7ecd3c0ab011 100644
--- a/arch/arm/common/uengine.c
+++ b/arch/arm/common/uengine.c
@@ -16,8 +16,7 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/string.h>
-#include <asm/hardware.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/uengine.h>
 #include <asm/io.h>
 
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
index be2b2f38fd94..bf97801a1068 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -170,7 +170,7 @@ CONFIG_MACH_AT91CAP9ADK=y
 # AT91 Board Options
 #
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -442,7 +442,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index 2011adfa6758..38e6a0abeb4e 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -176,7 +176,7 @@ CONFIG_MACH_AT91SAM9260EK=y
 # AT91 Board Options
 #
 # CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 4049768962d2..93b779f94b41 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9261EK=y
 # AT91 Board Options
 #
 # CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -433,7 +433,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index fa1c5aecb5a8..a7ddd94363ca 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -169,7 +169,7 @@ CONFIG_MACH_AT91SAM9263EK=y
 # AT91 Board Options
 #
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -428,7 +428,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index c06863847364..df0d6ee672b3 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -168,7 +168,7 @@ CONFIG_MACH_AT91SAM9G20EK=y
 # AT91 Board Options
 #
 # CONFIG_MTD_AT91_DATAFLASH_CARD is not set
-# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set
+# CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16 is not set
 
 #
 # AT91 Feature Selections
@@ -442,10 +442,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index d8ec5f9ca6ec..1c76642272a1 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -392,7 +392,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ONENAND is not set
diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig
index f3cd4a95373a..f945105d6cd6 100644
--- a/arch/arm/configs/cam60_defconfig
+++ b/arch/arm/configs/cam60_defconfig
@@ -466,10 +466,10 @@ CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-# CONFIG_MTD_NAND_AT91_ECC_SOFT is not set
-CONFIG_MTD_NAND_AT91_ECC_HW=y
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+# CONFIG_MTD_NAND_ATMEL_ECC_SOFT is not set
+CONFIG_MTD_NAND_ATMEL_ECC_HW=y
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
index 493ecee24f94..2307587a38a9 100644
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -1,15 +1,19 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-hh17
-# Fri Nov  9 20:23:03 2007
+# Linux kernel version: 2.6.26
+# Sat Jul 26 22:28:46 2008
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
 # CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
@@ -18,75 +22,90 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -100,6 +119,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System Type
@@ -111,21 +131,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_RPC is not set
@@ -133,80 +158,48 @@ CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_BOARD_IRQ_MAP_SMALL is not set
-CONFIG_BOARD_IRQ_MAP_BIG=y
-CONFIG_DMABOUNCE=y
+# CONFIG_ARCH_MSM7X00A is not set
 
 #
-# Intel PXA2xx Implementations
+# Intel PXA2xx/PXA3xx Implementations
 #
+# CONFIG_ARCH_GUMSTIX is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
 # CONFIG_ARCH_PXA_IDP is not set
-CONFIG_TOSHIBA_TMIO_OHCI=y
-CONFIG_ARCH_ESERIES=y
+# CONFIG_PXA_SHARPSL is not set
+CONFIG_ARCH_PXA_ESERIES=y
 CONFIG_MACH_E330=y
+CONFIG_MACH_E350=y
 CONFIG_MACH_E740=y
 CONFIG_MACH_E750=y
 CONFIG_MACH_E400=y
 CONFIG_MACH_E800=y
-CONFIG_E330_LCD=y
-CONFIG_E740_LCD=y
-CONFIG_E750_LCD=y
-CONFIG_E400_LCD=y
-CONFIG_E800_LCD=y
-CONFIG_ESERIES_UDC=y
-CONFIG_E330_TC6387XB=y
-CONFIG_E740_T7L66XB=y
-CONFIG_E400_T7L66XB=y
-CONFIG_E750_E800_TC6393XB=y
-CONFIG_E740_PCMCIA=m
-CONFIG_E750_PCMCIA=m
-CONFIG_E800_PCMCIA=m
-# CONFIG_MACH_A620 is not set
-# CONFIG_MACH_A716 is not set
-# CONFIG_MACH_A730 is not set
-# CONFIG_ARCH_H1900 is not set
-# CONFIG_ARCH_H2200 is not set
-# CONFIG_MACH_H3900 is not set
-# CONFIG_MACH_H4000 is not set
-# CONFIG_MACH_H4700 is not set
-# CONFIG_MACH_HX2750 is not set
-# CONFIG_ARCH_H5400 is not set
-# CONFIG_MACH_HIMALAYA is not set
-# CONFIG_MACH_HTCUNIVERSAL is not set
-# CONFIG_MACH_HTCALPINE is not set
-# CONFIG_MACH_MAGICIAN is not set
-# CONFIG_MACH_HTCAPACHE is not set
-# CONFIG_MACH_BLUEANGEL is not set
-
-#
-# HTC_HW6X00
-#
-# CONFIG_MACH_HTCBEETLES is not set
-# CONFIG_MACH_HW6900 is not set
-# CONFIG_MACH_HTCATHENA is not set
-# CONFIG_ARCH_AXIMX3 is not set
-# CONFIG_ARCH_AXIMX5 is not set
-# CONFIG_MACH_X50 is not set
-# CONFIG_ARCH_ROVERP1 is not set
-# CONFIG_ARCH_ROVERP5P is not set
-# CONFIG_MACH_XSCALE_PALMLD is not set
-# CONFIG_MACH_T3XSCALE is not set
-# CONFIG_MACH_RECON is not set
-# CONFIG_MACH_GHI270HG is not set
-# CONFIG_MACH_GHI270 is not set
-# CONFIG_MACH_LOOXC550 is not set
-# CONFIG_PXA_SHARPSL is not set
 # CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_EZX is not set
 CONFIG_PXA25x=y
+# CONFIG_PXA_PWM is not set
+
+#
+# Boot options
+#
 
 #
-# Linux As Bootloader
+# Power management
 #
-# CONFIG_LAB is not set
 
 #
 # Processor Type
@@ -215,6 +208,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -232,11 +226,9 @@ CONFIG_XSCALE_PMU=y
 #
 # Bus support
 #
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=m
 CONFIG_PCMCIA_LOAD_CIS=y
@@ -245,11 +237,14 @@ CONFIG_PCMCIA_IOCTL=y
 #
 # PC-card bridges
 #
-CONFIG_PCMCIA_PXA2XX=m
 
 #
 # Kernel Features
 #
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -262,9 +257,13 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -275,7 +274,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
-# CONFIG_TXTOFFSET_DELTA is not set
+CONFIG_ATAGS_PROC=y
 
 #
 # CPU Frequency scaling
@@ -304,11 +303,12 @@ CONFIG_BINFMT_MISC=y
 # Power management options
 #
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
-# CONFIG_DPM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 
 #
 # Networking
@@ -318,13 +318,13 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -339,35 +339,40 @@ CONFIG_IP_FIB_HASH=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -380,10 +385,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -391,15 +392,74 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+CONFIG_IRDA_ULTRA=y
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+CONFIG_PXA_FICP=y
+# CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
 CONFIG_IEEE80211=m
 # CONFIG_IEEE80211_DEBUG is not set
 CONFIG_IEEE80211_CRYPT_WEP=m
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
-CONFIG_WIRELESS_EXT=y
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -408,38 +468,32 @@ CONFIG_WIRELESS_EXT=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=m
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_PARTITIONS is not set
 
 #
 # User Modules And Translation Layers
 #
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLKDEVS=m
-CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_CHAR is not set
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
 # CONFIG_MTD_BLOCK_RO is not set
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -459,7 +513,6 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -482,82 +535,43 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=m
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_IDE_GENERIC is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
@@ -565,7 +579,7 @@ CONFIG_SCSI=m
 #
 # SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_BLK_DEV_SD is not set
+CONFIG_BLK_DEV_SD=m
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
@@ -579,6 +593,7 @@ CONFIG_SCSI=m
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -586,132 +601,78 @@ CONFIG_SCSI=m
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+CONFIG_PATA_PCMCIA=m
+# CONFIG_PATA_PLATFORM is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_VETH is not set
 # CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-
-#
-# Wireless 802.11 Frequency Hopping cards support
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
 # CONFIG_PCMCIA_RAYCS is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_HERMES is not set
+# CONFIG_LIBERTAS is not set
+CONFIG_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
 # CONFIG_ATMEL is not set
-
-#
-# Wireless 802.11b Pcmcia/Cardbus cards support
-#
 # CONFIG_AIRO_CS is not set
 # CONFIG_PCMCIA_WL3501 is not set
 # CONFIG_USB_ZD1201 is not set
-CONFIG_HOSTAP=m
-# CONFIG_HOSTAP_FIRMWARE is not set
-# CONFIG_HOSTAP_CS is not set
-# CONFIG_ACX is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# PCMCIA network device support
-#
-# CONFIG_NET_PCMCIA is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
 
 #
-# Wan interfaces
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+CONFIG_PCMCIA_PCNET=m
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
 
 #
@@ -719,38 +680,48 @@ CONFIG_NET_WIRELESS=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=m
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_LED_TRIGGER is not set
 
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
-CONFIG_TOUCHSCREEN_WM97XX=m
-CONFIG_TOUCHSCREEN_WM9705=y
-CONFIG_TOUCHSCREEN_WM9712=y
-CONFIG_TOUCHSCREEN_WM9713=y
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_TOUCHSCREEN_WM97XX=m
+CONFIG_TOUCHSCREEN_WM9705=y
+CONFIG_TOUCHSCREEN_WM9712=y
+CONFIG_TOUCHSCREEN_WM9713=y
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -763,9 +734,11 @@ CONFIG_TOUCHSCREEN_WM9713=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -777,25 +750,12 @@ CONFIG_HW_CONSOLE=y
 # Non-8250 serial port support
 #
 # CONFIG_SERIAL_PXA is not set
-# CONFIG_RS232_SERIAL is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=m
 # CONFIG_NVRAM is not set
-# CONFIG_SA1100_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-# CONFIG_TIHTC is not set
 
 #
 # PCMCIA character devices
@@ -803,117 +763,79 @@ CONFIG_HW_RANDOM=m
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_POWER_SUPPLY is not set
-
-#
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Misc devices
+# I2C GPIO expanders:
 #
 
 #
-# Multimedia Capabilities Port drivers
+# PCI GPIO expanders:
 #
-# CONFIG_ADC is not set
 
 #
-# Compaq/iPAQ Drivers
+# SPI GPIO expanders:
 #
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Compaq/HP iPAQ Drivers
+# Sonics Silicon Backplane
 #
-# CONFIG_IPAQ_SLEEVE is not set
-# CONFIG_SLEEVE_DEBUG is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+CONFIG_MFD_CORE=y
 # CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_ASIC2 is not set
-# CONFIG_HTC_ASIC3 is not set
-# CONFIG_HTC_PASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_BBKEYS is not set
-# CONFIG_HTC_ASIC3_DS1WM is not set
-# CONFIG_SOC_SAMCOP is not set
-# CONFIG_SOC_HAMCOP is not set
-# CONFIG_SOC_MQ11XX is not set
-CONFIG_SOC_T7L66XB=y
-# CONFIG_SOC_TC6387XB is not set
-CONFIG_SOC_TC6393XB=y
-# CONFIG_SOC_TSC2101 is not set
-# CONFIG_SOC_TSC2200 is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
+# CONFIG_HTC_PASIC3 is not set
+CONFIG_MFD_TC6393XB=y
 
 #
-# LED Triggers
+# Multimedia devices
 #
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CORGI=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -923,14 +845,25 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 #
 # Frame buffer hardware drivers
 #
-# CONFIG_FB_IMAGEON is not set
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
 # CONFIG_FB_PXA_PARAMETERS is not set
 # CONFIG_FB_MBX is not set
 CONFIG_FB_W100=y
+# CONFIG_FB_AM200EPD is not set
 # CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VSFB is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CORGI=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -938,6 +871,7 @@ CONFIG_FB_W100=y
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
 # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
 CONFIG_FONTS=y
 # CONFIG_FONT_8x8 is not set
@@ -945,28 +879,13 @@ CONFIG_FONTS=y
 # CONFIG_FONT_6x11 is not set
 # CONFIG_FONT_7x14 is not set
 # CONFIG_FONT_PEARL_8x8 is not set
-CONFIG_FONT_ACORN_8x8=y
-# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
 # CONFIG_FONT_SUN8x16 is not set
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
+# CONFIG_LOGO is not set
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -980,125 +899,75 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 CONFIG_SND_VERBOSE_PRINTK=y
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
+CONFIG_SND_ARM=y
 # CONFIG_SND_PXA2XX_AC97 is not set
-# CONFIG_SND_RECON is not set
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# PCMCIA devices
-#
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_PDAUDIOCF is not set
-
-#
-# SoC audio support
-#
-CONFIG_SND_SOC_AC97_BUS=y
+# CONFIG_SND_USB is not set
+# CONFIG_SND_PCMCIA is not set
 CONFIG_SND_SOC=m
-
-#
-# SoC Platforms
-#
-
-#
-# SoC Audio for the Atmel AT91
-#
-
-#
-# SoC Audio for the Intel PXA2xx
-#
+CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
 CONFIG_SND_PXA2XX_SOC_AC97=m
-CONFIG_SND_PXA2XX_SOC_E740_WM9705=m
-CONFIG_SND_PXA2XX_SOC_E750_WM9705=m
-CONFIG_SND_PXA2XX_SOC_E800_WM9712=m
-# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set
-# CONFIG_SND_PXA2XX_SOC_BLUEANGEL is not set
-# CONFIG_SND_PXA2XX_SOC_H5000 is not set
-
-#
-# SoC Audio for the Freescale i.MX
-#
-
-#
-# SoC Audio for the Samsung S3C24XX
-#
-# CONFIG_SND_SOC_AC97_CODEC is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8772 is not set
-# CONFIG_SND_SOC_WM8971 is not set
-# CONFIG_SND_SOC_WM8956 is not set
-# CONFIG_SND_SOC_WM8960 is not set
-# CONFIG_SND_SOC_WM8976 is not set
-# CONFIG_SND_SOC_WM8974 is not set
-# CONFIG_SND_SOC_WM8980 is not set
-CONFIG_SND_SOC_WM9705=m
-# CONFIG_SND_SOC_WM9713 is not set
+CONFIG_SND_PXA2XX_SOC_E800=m
 CONFIG_SND_SOC_WM9712=m
-# CONFIG_SND_SOC_UDA1380 is not set
-# CONFIG_SND_SOC_AK4535 is not set
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# HID Devices
+# USB Input Devices
 #
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 
 #
-# USB support
+# USB HID Boot Protocol drivers
 #
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 CONFIG_USB=m
-CONFIG_USB_DEBUG=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1107,68 +976,19 @@ CONFIG_USB_DYNAMIC_MINORS=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
+CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1192,56 +1012,57 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
 CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-CONFIG_USB_GADGET_PXA2XX=y
-CONFIG_USB_PXA2XX=y
-# CONFIG_USB_PXA2XX_SMALL is not set
+CONFIG_USB_GADGET_PXA25X=y
+CONFIG_USB_PXA25X=y
+CONFIG_USB_PXA25X_SMALL=y
+# CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_MQ11XX is not set
 # CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 # CONFIG_USB_GADGET_DUALSPEED is not set
 # CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
+CONFIG_USB_ETH=m
 # CONFIG_USB_ETH_RNDIS is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_CHAR is not set
-# CONFIG_USB_PXA2XX_GPIO is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
 
 #
-# MMC/SD Card support
+# MMC/SD Card Drivers
 #
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_PXA is not set
-CONFIG_MMC_TMIO=y
-# CONFIG_MMC_SAMCOP is not set
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
 
 #
-# Real Time Clock
+# MMC/SD Host Controller Drivers
 #
+# CONFIG_MMC_PXA is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1255,14 +1076,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1292,7 +1110,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1305,30 +1122,21 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1341,7 +1149,6 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
@@ -1363,10 +1170,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1407,30 +1211,32 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_FRAME_POINTER=y
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -1438,61 +1244,102 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=m
 CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
 # CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
new file mode 100644
index 000000000000..2a84d557adc2
--- /dev/null
+++ b/arch/arm/configs/ezx_defconfig
@@ -0,0 +1,1614 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc3
+# Mon Jul  7 17:52:21 2008
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-ezxdev"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_PCM027 is not set
+CONFIG_PXA_EZX=y
+CONFIG_MACH_EZX_A780=y
+CONFIG_MACH_EZX_E680=y
+CONFIG_MACH_EZX_A1200=y
+CONFIG_MACH_EZX_A910=y
+CONFIG_MACH_EZX_E6=y
+CONFIG_MACH_EZX_E2=y
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_PWM=y
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=m
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIUSB is not set
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+# CONFIG_BT_HCIUART_BCSP is not set
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_MAC80211=m
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
+
+#
+# Selecting 'y' for an algorithm will
+#
+
+#
+# build the algorithm into mac80211.
+#
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
+# CONFIG_MAC80211_DEBUG is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_XIP=y
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_SHARP_SL is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_PCAP=y
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=y
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=8
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PXA2XX=m
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_EZX_PCAP=y
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_PXA27x is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_USB_DSBR is not set
+# CONFIG_USB_SI470X is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_PWM=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# ALSA ARM devices
+#
+# CONFIG_SND_PXA2XX_AC97 is not set
+
+#
+# SPI devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC=y
+CONFIG_SND_PXA2XX_SOC=y
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_M66592 is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=y
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+
+#
+# MMC/SD Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SPI is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+# CONFIG_NFS_V4 is not set
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_ROOT_NFS is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+# CONFIG_CIFS_STATS2 is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index ef903bed061e..5cbd81589647 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
index 8688362bcf7b..1174e2764875 100644
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -429,7 +429,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_ONENAND is not set
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
index 3680bd2df26d..fcb4aaabd439 100644
--- a/arch/arm/configs/usb-a9260_defconfig
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -458,10 +458,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig
index 48d455bc7363..b786e0407e8e 100644
--- a/arch/arm/configs/usb-a9263_defconfig
+++ b/arch/arm/configs/usb-a9263_defconfig
@@ -450,10 +450,10 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
-CONFIG_MTD_NAND_AT91=y
-CONFIG_MTD_NAND_AT91_ECC_SOFT=y
-# CONFIG_MTD_NAND_AT91_ECC_HW is not set
-# CONFIG_MTD_NAND_AT91_ECC_NONE is not set
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+# CONFIG_MTD_NAND_ATMEL_ECC_HW is not set
+# CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig
index 26de37f74686..a9f41c24c9dc 100644
--- a/arch/arm/configs/yl9200_defconfig
+++ b/arch/arm/configs/yl9200_defconfig
@@ -421,7 +421,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_AT91=y
+CONFIG_MTD_NAND_ATMEL=y
 # CONFIG_MTD_NAND_NANDSIM is not set
 CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_ALAUDA is not set
diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild
new file mode 100644
index 000000000000..73237bd130a2
--- /dev/null
+++ b/arch/arm/include/asm/Kbuild
@@ -0,0 +1,3 @@
+include include/asm-generic/Kbuild.asm
+
+unifdef-y += hwcap.h
diff --git a/arch/arm/include/asm/a.out-core.h b/arch/arm/include/asm/a.out-core.h
new file mode 100644
index 000000000000..93d04acaa31f
--- /dev/null
+++ b/arch/arm/include/asm/a.out-core.h
@@ -0,0 +1,49 @@
+/* a.out coredump register dumper
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_A_OUT_CORE_H
+#define _ASM_A_OUT_CORE_H
+
+#ifdef __KERNEL__
+
+#include <linux/user.h>
+#include <linux/elfcore.h>
+
+/*
+ * fill in the user structure for an a.out core dump
+ */
+static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
+{
+	struct task_struct *tsk = current;
+
+	dump->magic = CMAGIC;
+	dump->start_code = tsk->mm->start_code;
+	dump->start_stack = regs->ARM_sp & ~(PAGE_SIZE - 1);
+
+	dump->u_tsize = (tsk->mm->end_code - tsk->mm->start_code) >> PAGE_SHIFT;
+	dump->u_dsize = (tsk->mm->brk - tsk->mm->start_data + PAGE_SIZE - 1) >> PAGE_SHIFT;
+	dump->u_ssize = 0;
+
+	dump->u_debugreg[0] = tsk->thread.debug.bp[0].address;
+	dump->u_debugreg[1] = tsk->thread.debug.bp[1].address;
+	dump->u_debugreg[2] = tsk->thread.debug.bp[0].insn.arm;
+	dump->u_debugreg[3] = tsk->thread.debug.bp[1].insn.arm;
+	dump->u_debugreg[4] = tsk->thread.debug.nsaved;
+
+	if (dump->start_stack < 0x04000000)
+		dump->u_ssize = (0x04000000 - dump->start_stack) >> PAGE_SHIFT;
+
+	dump->regs = *regs;
+	dump->u_fpvalid = dump_fpu (regs, &dump->u_fp);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_A_OUT_CORE_H */
diff --git a/arch/arm/include/asm/a.out.h b/arch/arm/include/asm/a.out.h
new file mode 100644
index 000000000000..79489fdcc8b8
--- /dev/null
+++ b/arch/arm/include/asm/a.out.h
@@ -0,0 +1,34 @@
+#ifndef __ARM_A_OUT_H__
+#define __ARM_A_OUT_H__
+
+#include <linux/personality.h>
+#include <asm/types.h>
+
+struct exec
+{
+  __u32 a_info;		/* Use macros N_MAGIC, etc for access */
+  __u32 a_text;		/* length of text, in bytes */
+  __u32 a_data;		/* length of data, in bytes */
+  __u32 a_bss;		/* length of uninitialized data area for file, in bytes */
+  __u32 a_syms;		/* length of symbol table data in file, in bytes */
+  __u32 a_entry;	/* start address */
+  __u32 a_trsize;	/* length of relocation info for text, in bytes */
+  __u32 a_drsize;	/* length of relocation info for data, in bytes */
+};
+
+/*
+ * This is always the same
+ */
+#define N_TXTADDR(a)	(0x00008000)
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#define M_ARM 103
+
+#ifndef LIBRARY_START_TEXT
+#define LIBRARY_START_TEXT	(0x00c00000)
+#endif
+
+#endif /* __A_OUT_GNU_H__ */
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
new file mode 100644
index 000000000000..6116e4893c0a
--- /dev/null
+++ b/arch/arm/include/asm/assembler.h
@@ -0,0 +1,116 @@
+/*
+ *  arch/arm/include/asm/assembler.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains arm architecture specific defines
+ *  for the different processors.
+ *
+ *  Do not include any C declarations in this file - it is included by
+ *  assembler source.
+ */
+#ifndef __ASSEMBLY__
+#error "Only include this from assembly code"
+#endif
+
+#include <asm/ptrace.h>
+
+/*
+ * Endian independent macros for shifting bytes within registers.
+ */
+#ifndef __ARMEB__
+#define pull            lsr
+#define push            lsl
+#define get_byte_0      lsl #0
+#define get_byte_1	lsr #8
+#define get_byte_2	lsr #16
+#define get_byte_3	lsr #24
+#define put_byte_0      lsl #0
+#define put_byte_1	lsl #8
+#define put_byte_2	lsl #16
+#define put_byte_3	lsl #24
+#else
+#define pull            lsl
+#define push            lsr
+#define get_byte_0	lsr #24
+#define get_byte_1	lsr #16
+#define get_byte_2	lsr #8
+#define get_byte_3      lsl #0
+#define put_byte_0	lsl #24
+#define put_byte_1	lsl #16
+#define put_byte_2	lsl #8
+#define put_byte_3      lsl #0
+#endif
+
+/*
+ * Data preload for architectures that support it
+ */
+#if __LINUX_ARM_ARCH__ >= 5
+#define PLD(code...)	code
+#else
+#define PLD(code...)
+#endif
+
+/*
+ * This can be used to enable code to cacheline align the destination
+ * pointer when bulk writing to memory.  Experiments on StrongARM and
+ * XScale didn't show this a worthwhile thing to do when the cache is not
+ * set to write-allocate (this would need further testing on XScale when WA
+ * is used).
+ *
+ * On Feroceon there is much to gain however, regardless of cache mode.
+ */
+#ifdef CONFIG_CPU_FEROCEON
+#define CALGN(code...) code
+#else
+#define CALGN(code...)
+#endif
+
+/*
+ * Enable and disable interrupts
+ */
+#if __LINUX_ARM_ARCH__ >= 6
+	.macro	disable_irq
+	cpsid	i
+	.endm
+
+	.macro	enable_irq
+	cpsie	i
+	.endm
+#else
+	.macro	disable_irq
+	msr	cpsr_c, #PSR_I_BIT | SVC_MODE
+	.endm
+
+	.macro	enable_irq
+	msr	cpsr_c, #SVC_MODE
+	.endm
+#endif
+
+/*
+ * Save the current IRQ state and disable IRQs.  Note that this macro
+ * assumes FIQs are enabled, and that the processor is in SVC mode.
+ */
+	.macro	save_and_disable_irqs, oldcpsr
+	mrs	\oldcpsr, cpsr
+	disable_irq
+	.endm
+
+/*
+ * Restore interrupt state previously stored in a register.  We don't
+ * guarantee that this will preserve the flags.
+ */
+	.macro	restore_irqs, oldcpsr
+	msr	cpsr_c, \oldcpsr
+	.endm
+
+#define USER(x...)				\
+9999:	x;					\
+	.section __ex_table,"a";		\
+	.align	3;				\
+	.long	9999b,9001f;			\
+	.previous
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
new file mode 100644
index 000000000000..325f881ccb50
--- /dev/null
+++ b/arch/arm/include/asm/atomic.h
@@ -0,0 +1,212 @@
+/*
+ *  arch/arm/include/asm/atomic.h
+ *
+ *  Copyright (C) 1996 Russell King.
+ *  Copyright (C) 2002 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_ATOMIC_H
+#define __ASM_ARM_ATOMIC_H
+
+#include <linux/compiler.h>
+#include <asm/system.h>
+
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+#ifdef __KERNEL__
+
+#define atomic_read(v)	((v)->counter)
+
+#if __LINUX_ARM_ARCH__ >= 6
+
+/*
+ * ARMv6 UP and SMP safe atomic ops.  We use load exclusive and
+ * store exclusive to ensure that these are atomic.  We may loop
+ * to ensure that the update happens.  Writing to 'v->counter'
+ * without using the following operations WILL break the atomic
+ * nature of these ops.
+ */
+static inline void atomic_set(atomic_t *v, int i)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__("@ atomic_set\n"
+"1:	ldrex	%0, [%1]\n"
+"	strex	%0, %2, [%1]\n"
+"	teq	%0, #0\n"
+"	bne	1b"
+	: "=&r" (tmp)
+	: "r" (&v->counter), "r" (i)
+	: "cc");
+}
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	__asm__ __volatile__("@ atomic_add_return\n"
+"1:	ldrex	%0, [%2]\n"
+"	add	%0, %0, %3\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+
+	return result;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long tmp;
+	int result;
+
+	__asm__ __volatile__("@ atomic_sub_return\n"
+"1:	ldrex	%0, [%2]\n"
+"	sub	%0, %0, %3\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (result), "=&r" (tmp)
+	: "r" (&v->counter), "Ir" (i)
+	: "cc");
+
+	return result;
+}
+
+static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
+{
+	unsigned long oldval, res;
+
+	do {
+		__asm__ __volatile__("@ atomic_cmpxchg\n"
+		"ldrex	%1, [%2]\n"
+		"mov	%0, #0\n"
+		"teq	%1, %3\n"
+		"strexeq %0, %4, [%2]\n"
+		    : "=&r" (res), "=&r" (oldval)
+		    : "r" (&ptr->counter), "Ir" (old), "r" (new)
+		    : "cc");
+	} while (res);
+
+	return oldval;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+	unsigned long tmp, tmp2;
+
+	__asm__ __volatile__("@ atomic_clear_mask\n"
+"1:	ldrex	%0, [%2]\n"
+"	bic	%0, %0, %3\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+	: "=&r" (tmp), "=&r" (tmp2)
+	: "r" (addr), "Ir" (mask)
+	: "cc");
+}
+
+#else /* ARM_ARCH_6 */
+
+#include <asm/system.h>
+
+#ifdef CONFIG_SMP
+#error SMP not supported on pre-ARMv6 CPUs
+#endif
+
+#define atomic_set(v,i)	(((v)->counter) = (i))
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long flags;
+	int val;
+
+	raw_local_irq_save(flags);
+	val = v->counter;
+	v->counter = val += i;
+	raw_local_irq_restore(flags);
+
+	return val;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long flags;
+	int val;
+
+	raw_local_irq_save(flags);
+	val = v->counter;
+	v->counter = val -= i;
+	raw_local_irq_restore(flags);
+
+	return val;
+}
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+	int ret;
+	unsigned long flags;
+
+	raw_local_irq_save(flags);
+	ret = v->counter;
+	if (likely(ret == old))
+		v->counter = new;
+	raw_local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
+{
+	unsigned long flags;
+
+	raw_local_irq_save(flags);
+	*addr &= ~mask;
+	raw_local_irq_restore(flags);
+}
+
+#endif /* __LINUX_ARM_ARCH__ */
+
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+
+	c = atomic_read(v);
+	while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c)
+		c = old;
+	return c != u;
+}
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_add(i, v)	(void) atomic_add_return(i, v)
+#define atomic_inc(v)		(void) atomic_add_return(1, v)
+#define atomic_sub(i, v)	(void) atomic_sub_return(i, v)
+#define atomic_dec(v)		(void) atomic_sub_return(1, v)
+
+#define atomic_inc_and_test(v)	(atomic_add_return(1, v) == 0)
+#define atomic_dec_and_test(v)	(atomic_sub_return(1, v) == 0)
+#define atomic_inc_return(v)    (atomic_add_return(1, v))
+#define atomic_dec_return(v)    (atomic_sub_return(1, v))
+#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
+
+#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
+
+/* Atomic operations are already serializing on ARM */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#include <asm-generic/atomic.h>
+#endif
+#endif
diff --git a/arch/arm/include/asm/auxvec.h b/arch/arm/include/asm/auxvec.h
new file mode 100644
index 000000000000..c0536f6b29a7
--- /dev/null
+++ b/arch/arm/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASMARM_AUXVEC_H
+#define __ASMARM_AUXVEC_H
+
+#endif
diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h
new file mode 100644
index 000000000000..9a1db20e032a
--- /dev/null
+++ b/arch/arm/include/asm/bitops.h
@@ -0,0 +1,340 @@
+/*
+ * Copyright 1995, Russell King.
+ * Various bits and pieces copyrights include:
+ *  Linus Torvalds (test_bit).
+ * Big endian support: Copyright 2001, Nicolas Pitre
+ *  reworked by rmk.
+ *
+ * bit 0 is the LSB of an "unsigned long" quantity.
+ *
+ * Please note that the code in this file should never be included
+ * from user space.  Many of these are not implemented in assembler
+ * since they would be too costly.  Also, they require privileged
+ * instructions (which are not available from user mode) to ensure
+ * that they are atomic.
+ */
+
+#ifndef __ASM_ARM_BITOPS_H
+#define __ASM_ARM_BITOPS_H
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <asm/system.h>
+
+#define smp_mb__before_clear_bit()	mb()
+#define smp_mb__after_clear_bit()	mb()
+
+/*
+ * These functions are the basis of our bit ops.
+ *
+ * First, the atomic bitops. These use native endian.
+ */
+static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	*p |= mask;
+	raw_local_irq_restore(flags);
+}
+
+static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	*p &= ~mask;
+	raw_local_irq_restore(flags);
+}
+
+static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	*p ^= mask;
+	raw_local_irq_restore(flags);
+}
+
+static inline int
+____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned int res;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	res = *p;
+	*p = res | mask;
+	raw_local_irq_restore(flags);
+
+	return res & mask;
+}
+
+static inline int
+____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned int res;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	res = *p;
+	*p = res & ~mask;
+	raw_local_irq_restore(flags);
+
+	return res & mask;
+}
+
+static inline int
+____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
+{
+	unsigned long flags;
+	unsigned int res;
+	unsigned long mask = 1UL << (bit & 31);
+
+	p += bit >> 5;
+
+	raw_local_irq_save(flags);
+	res = *p;
+	*p = res ^ mask;
+	raw_local_irq_restore(flags);
+
+	return res & mask;
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+/*
+ *  A note about Endian-ness.
+ *  -------------------------
+ *
+ * When the ARM is put into big endian mode via CR15, the processor
+ * merely swaps the order of bytes within words, thus:
+ *
+ *          ------------ physical data bus bits -----------
+ *          D31 ... D24  D23 ... D16  D15 ... D8  D7 ... D0
+ * little     byte 3       byte 2       byte 1      byte 0
+ * big        byte 0       byte 1       byte 2      byte 3
+ *
+ * This means that reading a 32-bit word at address 0 returns the same
+ * value irrespective of the endian mode bit.
+ *
+ * Peripheral devices should be connected with the data bus reversed in
+ * "Big Endian" mode.  ARM Application Note 61 is applicable, and is
+ * available from http://www.arm.com/.
+ *
+ * The following assumes that the data bus connectivity for big endian
+ * mode has been followed.
+ *
+ * Note that bit 0 is defined to be 32-bit word bit 0, not byte 0 bit 0.
+ */
+
+/*
+ * Little endian assembly bitops.  nr = 0 -> byte 0 bit 0.
+ */
+extern void _set_bit_le(int nr, volatile unsigned long * p);
+extern void _clear_bit_le(int nr, volatile unsigned long * p);
+extern void _change_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_set_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p);
+extern int _test_and_change_bit_le(int nr, volatile unsigned long * p);
+extern int _find_first_zero_bit_le(const void * p, unsigned size);
+extern int _find_next_zero_bit_le(const void * p, int size, int offset);
+extern int _find_first_bit_le(const unsigned long *p, unsigned size);
+extern int _find_next_bit_le(const unsigned long *p, int size, int offset);
+
+/*
+ * Big endian assembly bitops.  nr = 0 -> byte 3 bit 0.
+ */
+extern void _set_bit_be(int nr, volatile unsigned long * p);
+extern void _clear_bit_be(int nr, volatile unsigned long * p);
+extern void _change_bit_be(int nr, volatile unsigned long * p);
+extern int _test_and_set_bit_be(int nr, volatile unsigned long * p);
+extern int _test_and_clear_bit_be(int nr, volatile unsigned long * p);
+extern int _test_and_change_bit_be(int nr, volatile unsigned long * p);
+extern int _find_first_zero_bit_be(const void * p, unsigned size);
+extern int _find_next_zero_bit_be(const void * p, int size, int offset);
+extern int _find_first_bit_be(const unsigned long *p, unsigned size);
+extern int _find_next_bit_be(const unsigned long *p, int size, int offset);
+
+#ifndef CONFIG_SMP
+/*
+ * The __* form of bitops are non-atomic and may be reordered.
+ */
+#define	ATOMIC_BITOP_LE(name,nr,p)		\
+	(__builtin_constant_p(nr) ?		\
+	 ____atomic_##name(nr, p) :		\
+	 _##name##_le(nr,p))
+
+#define	ATOMIC_BITOP_BE(name,nr,p)		\
+	(__builtin_constant_p(nr) ?		\
+	 ____atomic_##name(nr, p) :		\
+	 _##name##_be(nr,p))
+#else
+#define ATOMIC_BITOP_LE(name,nr,p)	_##name##_le(nr,p)
+#define ATOMIC_BITOP_BE(name,nr,p)	_##name##_be(nr,p)
+#endif
+
+#define NONATOMIC_BITOP(name,nr,p)		\
+	(____nonatomic_##name(nr, p))
+
+#ifndef __ARMEB__
+/*
+ * These are the little endian, atomic definitions.
+ */
+#define set_bit(nr,p)			ATOMIC_BITOP_LE(set_bit,nr,p)
+#define clear_bit(nr,p)			ATOMIC_BITOP_LE(clear_bit,nr,p)
+#define change_bit(nr,p)		ATOMIC_BITOP_LE(change_bit,nr,p)
+#define test_and_set_bit(nr,p)		ATOMIC_BITOP_LE(test_and_set_bit,nr,p)
+#define test_and_clear_bit(nr,p)	ATOMIC_BITOP_LE(test_and_clear_bit,nr,p)
+#define test_and_change_bit(nr,p)	ATOMIC_BITOP_LE(test_and_change_bit,nr,p)
+#define find_first_zero_bit(p,sz)	_find_first_zero_bit_le(p,sz)
+#define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_le(p,sz,off)
+#define find_first_bit(p,sz)		_find_first_bit_le(p,sz)
+#define find_next_bit(p,sz,off)		_find_next_bit_le(p,sz,off)
+
+#define WORD_BITOFF_TO_LE(x)		((x))
+
+#else
+
+/*
+ * These are the big endian, atomic definitions.
+ */
+#define set_bit(nr,p)			ATOMIC_BITOP_BE(set_bit,nr,p)
+#define clear_bit(nr,p)			ATOMIC_BITOP_BE(clear_bit,nr,p)
+#define change_bit(nr,p)		ATOMIC_BITOP_BE(change_bit,nr,p)
+#define test_and_set_bit(nr,p)		ATOMIC_BITOP_BE(test_and_set_bit,nr,p)
+#define test_and_clear_bit(nr,p)	ATOMIC_BITOP_BE(test_and_clear_bit,nr,p)
+#define test_and_change_bit(nr,p)	ATOMIC_BITOP_BE(test_and_change_bit,nr,p)
+#define find_first_zero_bit(p,sz)	_find_first_zero_bit_be(p,sz)
+#define find_next_zero_bit(p,sz,off)	_find_next_zero_bit_be(p,sz,off)
+#define find_first_bit(p,sz)		_find_first_bit_be(p,sz)
+#define find_next_bit(p,sz,off)		_find_next_bit_be(p,sz,off)
+
+#define WORD_BITOFF_TO_LE(x)		((x) ^ 0x18)
+
+#endif
+
+#if __LINUX_ARM_ARCH__ < 5
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/ffs.h>
+
+#else
+
+static inline int constant_fls(int x)
+{
+	int r = 32;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff0000u)) {
+		x <<= 16;
+		r -= 16;
+	}
+	if (!(x & 0xff000000u)) {
+		x <<= 8;
+		r -= 8;
+	}
+	if (!(x & 0xf0000000u)) {
+		x <<= 4;
+		r -= 4;
+	}
+	if (!(x & 0xc0000000u)) {
+		x <<= 2;
+		r -= 2;
+	}
+	if (!(x & 0x80000000u)) {
+		x <<= 1;
+		r -= 1;
+	}
+	return r;
+}
+
+/*
+ * On ARMv5 and above those functions can be implemented around
+ * the clz instruction for much better code efficiency.
+ */
+
+#define __fls(x) \
+	( __builtin_constant_p(x) ? constant_fls(x) : \
+	  ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) )
+
+/* Implement fls() in C so that 64-bit args are suitably truncated */
+static inline int fls(int x)
+{
+	return __fls(x);
+}
+
+#define ffs(x) ({ unsigned long __t = (x); fls(__t & -__t); })
+#define __ffs(x) (ffs(x) - 1)
+#define ffz(x) __ffs( ~(x) )
+
+#endif
+
+#include <asm-generic/bitops/fls64.h>
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+/*
+ * Ext2 is defined to use little-endian byte ordering.
+ * These do not need to be atomic.
+ */
+#define ext2_set_bit(nr,p)			\
+		__test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_set_bit_atomic(lock,nr,p)          \
+                test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_clear_bit(nr,p)			\
+		__test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_clear_bit_atomic(lock,nr,p)        \
+                test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_test_bit(nr,p)			\
+		test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define ext2_find_first_zero_bit(p,sz)		\
+		_find_first_zero_bit_le(p,sz)
+#define ext2_find_next_zero_bit(p,sz,off)	\
+		_find_next_zero_bit_le(p,sz,off)
+#define ext2_find_next_bit(p, sz, off) \
+		_find_next_bit_le(p, sz, off)
+
+/*
+ * Minix is defined to use little-endian byte ordering.
+ * These do not need to be atomic.
+ */
+#define minix_set_bit(nr,p)			\
+		__set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_bit(nr,p)			\
+		test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_and_set_bit(nr,p)		\
+		__test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_test_and_clear_bit(nr,p)		\
+		__test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p))
+#define minix_find_first_zero_bit(p,sz)		\
+		_find_first_zero_bit_le(p,sz)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ARM_BITOPS_H */
diff --git a/arch/arm/include/asm/bug.h b/arch/arm/include/asm/bug.h
new file mode 100644
index 000000000000..7b62351f097d
--- /dev/null
+++ b/arch/arm/include/asm/bug.h
@@ -0,0 +1,24 @@
+#ifndef _ASMARM_BUG_H
+#define _ASMARM_BUG_H
+
+
+#ifdef CONFIG_BUG
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+extern void __bug(const char *file, int line) __attribute__((noreturn));
+
+/* give file/line information */
+#define BUG()		__bug(__FILE__, __LINE__)
+
+#else
+
+/* this just causes an oops */
+#define BUG()		(*(int *)0 = 0)
+
+#endif
+
+#define HAVE_ARCH_BUG
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/arch/arm/include/asm/bugs.h b/arch/arm/include/asm/bugs.h
new file mode 100644
index 000000000000..a97f1ea708d1
--- /dev/null
+++ b/arch/arm/include/asm/bugs.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/include/asm/bugs.h
+ *
+ *  Copyright (C) 1995-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_BUGS_H
+#define __ASM_BUGS_H
+
+#ifdef CONFIG_MMU
+extern void check_writebuffer_bugs(void);
+
+#define check_bugs() check_writebuffer_bugs()
+#else
+#define check_bugs() do { } while (0)
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/asm/byteorder.h
new file mode 100644
index 000000000000..4fbfb22f65a0
--- /dev/null
+++ b/arch/arm/include/asm/byteorder.h
@@ -0,0 +1,58 @@
+/*
+ *  arch/arm/include/asm/byteorder.h
+ *
+ * ARM Endian-ness.  In little endian mode, the data bus is connected such
+ * that byte accesses appear as:
+ *  0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ *
+ * When in big endian mode, byte accesses appear as:
+ *  0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7
+ * and word accesses (data or instruction) appear as:
+ *  d0...d31
+ */
+#ifndef __ASM_ARM_BYTEORDER_H
+#define __ASM_ARM_BYTEORDER_H
+
+#include <linux/compiler.h>
+#include <asm/types.h>
+
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+	__u32 t;
+
+#ifndef __thumb__
+	if (!__builtin_constant_p(x)) {
+		/*
+		 * The compiler needs a bit of a hint here to always do the
+		 * right thing and not screw it up to different degrees
+		 * depending on the gcc version.
+		 */
+		asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x));
+	} else
+#endif
+		t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */
+
+	x = (x << 24) | (x >> 8);		/* mov r0,r0,ror #8      */
+	t &= ~0x00FF0000;			/* bic r1,r1,#0x00FF0000 */
+	x ^= (t >> 8);				/* eor r0,r0,r1,lsr #8   */
+
+	return x;
+}
+
+#define __arch__swab32(x) ___arch__swab32(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#ifdef __ARMEB__
+#include <linux/byteorder/big_endian.h>
+#else
+#include <linux/byteorder/little_endian.h>
+#endif
+
+#endif
+
diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
new file mode 100644
index 000000000000..cb7a9e97fd7e
--- /dev/null
+++ b/arch/arm/include/asm/cache.h
@@ -0,0 +1,10 @@
+/*
+ *  arch/arm/include/asm/cache.h
+ */
+#ifndef __ASMARM_CACHE_H
+#define __ASMARM_CACHE_H
+
+#define L1_CACHE_SHIFT		5
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#endif
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
new file mode 100644
index 000000000000..9073d9c6567e
--- /dev/null
+++ b/arch/arm/include/asm/cacheflush.h
@@ -0,0 +1,537 @@
+/*
+ *  arch/arm/include/asm/cacheflush.h
+ *
+ *  Copyright (C) 1999-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_CACHEFLUSH_H
+#define _ASMARM_CACHEFLUSH_H
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+
+#include <asm/glue.h>
+#include <asm/shmparam.h>
+
+#define CACHE_COLOUR(vaddr)	((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
+
+/*
+ *	Cache Model
+ *	===========
+ */
+#undef _CACHE
+#undef MULTI_CACHE
+
+#if defined(CONFIG_CPU_CACHE_V3)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE v3
+# endif
+#endif
+
+#if defined(CONFIG_CPU_CACHE_V4)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE v4
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
+    defined(CONFIG_CPU_ARM925T) || defined(CONFIG_CPU_ARM1020)
+# define MULTI_CACHE 1
+#endif
+
+#if defined(CONFIG_CPU_ARM926T)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE arm926
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM940T)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE arm940
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM946E)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE arm946
+# endif
+#endif
+
+#if defined(CONFIG_CPU_CACHE_V4WB)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE v4wb
+# endif
+#endif
+
+#if defined(CONFIG_CPU_XSCALE)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE xscale
+# endif
+#endif
+
+#if defined(CONFIG_CPU_XSC3)
+# ifdef _CACHE
+#  define MULTI_CACHE 1
+# else
+#  define _CACHE xsc3
+# endif
+#endif
+
+#if defined(CONFIG_CPU_FEROCEON)
+# define MULTI_CACHE 1
+#endif
+
+#if defined(CONFIG_CPU_V6)
+//# ifdef _CACHE
+#  define MULTI_CACHE 1
+//# else
+//#  define _CACHE v6
+//# endif
+#endif
+
+#if defined(CONFIG_CPU_V7)
+//# ifdef _CACHE
+#  define MULTI_CACHE 1
+//# else
+//#  define _CACHE v7
+//# endif
+#endif
+
+#if !defined(_CACHE) && !defined(MULTI_CACHE)
+#error Unknown cache maintainence model
+#endif
+
+/*
+ * This flag is used to indicate that the page pointed to by a pte
+ * is dirty and requires cleaning before returning it to the user.
+ */
+#define PG_dcache_dirty PG_arch_1
+
+/*
+ *	MM Cache Management
+ *	===================
+ *
+ *	The arch/arm/mm/cache-*.S and arch/arm/mm/proc-*.S files
+ *	implement these methods.
+ *
+ *	Start addresses are inclusive and end addresses are exclusive;
+ *	start addresses should be rounded down, end addresses up.
+ *
+ *	See Documentation/cachetlb.txt for more information.
+ *	Please note that the implementation of these, and the required
+ *	effects are cache-type (VIVT/VIPT/PIPT) specific.
+ *
+ *	flush_cache_kern_all()
+ *
+ *		Unconditionally clean and invalidate the entire cache.
+ *
+ *	flush_cache_user_mm(mm)
+ *
+ *		Clean and invalidate all user space cache entries
+ *		before a change of page tables.
+ *
+ *	flush_cache_user_range(start, end, flags)
+ *
+ *		Clean and invalidate a range of cache entries in the
+ *		specified address space before a change of page tables.
+ *		- start - user start address (inclusive, page aligned)
+ *		- end   - user end address   (exclusive, page aligned)
+ *		- flags - vma->vm_flags field
+ *
+ *	coherent_kern_range(start, end)
+ *
+ *		Ensure coherency between the Icache and the Dcache in the
+ *		region described by start, end.  If you have non-snooping
+ *		Harvard caches, you need to implement this function.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	DMA Cache Coherency
+ *	===================
+ *
+ *	dma_inv_range(start, end)
+ *
+ *		Invalidate (discard) the specified virtual address range.
+ *		May not write back any entries.  If 'start' or 'end'
+ *		are not cache line aligned, those lines must be written
+ *		back.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	dma_clean_range(start, end)
+ *
+ *		Clean (write back) the specified virtual address range.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	dma_flush_range(start, end)
+ *
+ *		Clean and invalidate the specified virtual address range.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ */
+
+struct cpu_cache_fns {
+	void (*flush_kern_all)(void);
+	void (*flush_user_all)(void);
+	void (*flush_user_range)(unsigned long, unsigned long, unsigned int);
+
+	void (*coherent_kern_range)(unsigned long, unsigned long);
+	void (*coherent_user_range)(unsigned long, unsigned long);
+	void (*flush_kern_dcache_page)(void *);
+
+	void (*dma_inv_range)(const void *, const void *);
+	void (*dma_clean_range)(const void *, const void *);
+	void (*dma_flush_range)(const void *, const void *);
+};
+
+struct outer_cache_fns {
+	void (*inv_range)(unsigned long, unsigned long);
+	void (*clean_range)(unsigned long, unsigned long);
+	void (*flush_range)(unsigned long, unsigned long);
+};
+
+/*
+ * Select the calling method
+ */
+#ifdef MULTI_CACHE
+
+extern struct cpu_cache_fns cpu_cache;
+
+#define __cpuc_flush_kern_all		cpu_cache.flush_kern_all
+#define __cpuc_flush_user_all		cpu_cache.flush_user_all
+#define __cpuc_flush_user_range		cpu_cache.flush_user_range
+#define __cpuc_coherent_kern_range	cpu_cache.coherent_kern_range
+#define __cpuc_coherent_user_range	cpu_cache.coherent_user_range
+#define __cpuc_flush_dcache_page	cpu_cache.flush_kern_dcache_page
+
+/*
+ * These are private to the dma-mapping API.  Do not use directly.
+ * Their sole purpose is to ensure that data held in the cache
+ * is visible to DMA, or data written by DMA to system memory is
+ * visible to the CPU.
+ */
+#define dmac_inv_range			cpu_cache.dma_inv_range
+#define dmac_clean_range		cpu_cache.dma_clean_range
+#define dmac_flush_range		cpu_cache.dma_flush_range
+
+#else
+
+#define __cpuc_flush_kern_all		__glue(_CACHE,_flush_kern_cache_all)
+#define __cpuc_flush_user_all		__glue(_CACHE,_flush_user_cache_all)
+#define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
+#define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
+#define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
+#define __cpuc_flush_dcache_page	__glue(_CACHE,_flush_kern_dcache_page)
+
+extern void __cpuc_flush_kern_all(void);
+extern void __cpuc_flush_user_all(void);
+extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
+extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
+extern void __cpuc_coherent_user_range(unsigned long, unsigned long);
+extern void __cpuc_flush_dcache_page(void *);
+
+/*
+ * These are private to the dma-mapping API.  Do not use directly.
+ * Their sole purpose is to ensure that data held in the cache
+ * is visible to DMA, or data written by DMA to system memory is
+ * visible to the CPU.
+ */
+#define dmac_inv_range			__glue(_CACHE,_dma_inv_range)
+#define dmac_clean_range		__glue(_CACHE,_dma_clean_range)
+#define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
+
+extern void dmac_inv_range(const void *, const void *);
+extern void dmac_clean_range(const void *, const void *);
+extern void dmac_flush_range(const void *, const void *);
+
+#endif
+
+#ifdef CONFIG_OUTER_CACHE
+
+extern struct outer_cache_fns outer_cache;
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.inv_range)
+		outer_cache.inv_range(start, end);
+}
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.clean_range)
+		outer_cache.clean_range(start, end);
+}
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.flush_range)
+		outer_cache.flush_range(start, end);
+}
+
+#else
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{ }
+
+#endif
+
+/*
+ * flush_cache_vmap() is used when creating mappings (eg, via vmap,
+ * vmalloc, ioremap etc) in kernel space for pages.  Since the
+ * direct-mappings of these pages may contain cached data, we need
+ * to do a full cache flush to ensure that writebacks don't corrupt
+ * data placed into these pages via the new mappings.
+ */
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+/*
+ * Copy user data from/to a page which is mapped into a different
+ * processes address space.  Really, we want to allow our "user
+ * space" model to handle this.
+ */
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		memcpy(dst, src, len);				\
+		flush_ptrace_access(vma, page, vaddr, dst, len, 1);\
+	} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		memcpy(dst, src, len);				\
+	} while (0)
+
+/*
+ * Convert calls to our calling convention.
+ */
+#define flush_cache_all()		__cpuc_flush_kern_all()
+#ifndef CONFIG_CPU_CACHE_VIPT
+static inline void flush_cache_mm(struct mm_struct *mm)
+{
+	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+		__cpuc_flush_user_all();
+}
+
+static inline void
+flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
+{
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
+		__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
+					vma->vm_flags);
+}
+
+static inline void
+flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
+{
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+		unsigned long addr = user_addr & PAGE_MASK;
+		__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
+	}
+}
+
+static inline void
+flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+			 unsigned long uaddr, void *kaddr,
+			 unsigned long len, int write)
+{
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+		unsigned long addr = (unsigned long)kaddr;
+		__cpuc_coherent_kern_range(addr, addr + len);
+	}
+}
+#else
+extern void flush_cache_mm(struct mm_struct *mm);
+extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
+extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn);
+extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+				unsigned long uaddr, void *kaddr,
+				unsigned long len, int write);
+#endif
+
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+
+/*
+ * flush_cache_user_range is used when we want to ensure that the
+ * Harvard caches are synchronised for the user space address range.
+ * This is used for the ARM private sys_cacheflush system call.
+ */
+#define flush_cache_user_range(vma,start,end) \
+	__cpuc_coherent_user_range((start) & PAGE_MASK, PAGE_ALIGN(end))
+
+/*
+ * Perform necessary cache operations to ensure that data previously
+ * stored within this range of addresses can be executed by the CPU.
+ */
+#define flush_icache_range(s,e)		__cpuc_coherent_kern_range(s,e)
+
+/*
+ * Perform necessary cache operations to ensure that the TLB will
+ * see data written in the specified area.
+ */
+#define clean_dcache_area(start,size)	cpu_dcache_clean_area(start, size)
+
+/*
+ * flush_dcache_page is used when the kernel has written to the page
+ * cache page at virtual address page->virtual.
+ *
+ * If this page isn't mapped (ie, page_mapping == NULL), or it might
+ * have userspace mappings, then we _must_ always clean + invalidate
+ * the dcache entries associated with the kernel mapping.
+ *
+ * Otherwise we can defer the operation, and clean the cache when we are
+ * about to change to user space.  This is the same method as used on SPARC64.
+ * See update_mmu_cache for the user space part.
+ */
+extern void flush_dcache_page(struct page *);
+
+extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
+
+static inline void __flush_icache_all(void)
+{
+	asm("mcr	p15, 0, %0, c7, c5, 0	@ invalidate I-cache\n"
+	    :
+	    : "r" (0));
+}
+
+#define ARCH_HAS_FLUSH_ANON_PAGE
+static inline void flush_anon_page(struct vm_area_struct *vma,
+			 struct page *page, unsigned long vmaddr)
+{
+	extern void __flush_anon_page(struct vm_area_struct *vma,
+				struct page *, unsigned long);
+	if (PageAnon(page))
+		__flush_anon_page(vma, page, vmaddr);
+}
+
+#define flush_dcache_mmap_lock(mapping) \
+	spin_lock_irq(&(mapping)->tree_lock)
+#define flush_dcache_mmap_unlock(mapping) \
+	spin_unlock_irq(&(mapping)->tree_lock)
+
+#define flush_icache_user_range(vma,page,addr,len) \
+	flush_dcache_page(page)
+
+/*
+ * We don't appear to need to do anything here.  In fact, if we did, we'd
+ * duplicate cache flushing elsewhere performed by flush_dcache_page().
+ */
+#define flush_icache_page(vma,page)	do { } while (0)
+
+static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt,
+	unsigned offset, size_t size)
+{
+	const void *start = (void __force *)virt + offset;
+	dmac_inv_range(start, start + size);
+}
+
+#define __cacheid_present(val)			(val != read_cpuid(CPUID_ID))
+#define __cacheid_type_v7(val)			((val & (7 << 29)) == (4 << 29))
+
+#define __cacheid_vivt_prev7(val)		((val & (15 << 25)) != (14 << 25))
+#define __cacheid_vipt_prev7(val)		((val & (15 << 25)) == (14 << 25))
+#define __cacheid_vipt_nonaliasing_prev7(val)	((val & (15 << 25 | 1 << 23)) == (14 << 25))
+#define __cacheid_vipt_aliasing_prev7(val)	((val & (15 << 25 | 1 << 23)) == (14 << 25 | 1 << 23))
+
+#define __cacheid_vivt(val)			(__cacheid_type_v7(val) ? 0 : __cacheid_vivt_prev7(val))
+#define __cacheid_vipt(val)			(__cacheid_type_v7(val) ? 1 : __cacheid_vipt_prev7(val))
+#define __cacheid_vipt_nonaliasing(val)		(__cacheid_type_v7(val) ? 1 : __cacheid_vipt_nonaliasing_prev7(val))
+#define __cacheid_vipt_aliasing(val)		(__cacheid_type_v7(val) ? 0 : __cacheid_vipt_aliasing_prev7(val))
+#define __cacheid_vivt_asid_tagged_instr(val)	(__cacheid_type_v7(val) ? ((val & (3 << 14)) == (1 << 14)) : 0)
+
+#if defined(CONFIG_CPU_CACHE_VIVT) && !defined(CONFIG_CPU_CACHE_VIPT)
+/*
+ * VIVT caches only
+ */
+#define cache_is_vivt()			1
+#define cache_is_vipt()			0
+#define cache_is_vipt_nonaliasing()	0
+#define cache_is_vipt_aliasing()	0
+#define icache_is_vivt_asid_tagged()	0
+
+#elif !defined(CONFIG_CPU_CACHE_VIVT) && defined(CONFIG_CPU_CACHE_VIPT)
+/*
+ * VIPT caches only
+ */
+#define cache_is_vivt()			0
+#define cache_is_vipt()			1
+#define cache_is_vipt_nonaliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_vipt_nonaliasing(__val);			\
+	})
+
+#define cache_is_vipt_aliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_vipt_aliasing(__val);				\
+	})
+
+#define icache_is_vivt_asid_tagged()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_vivt_asid_tagged_instr(__val);		\
+	})
+
+#else
+/*
+ * VIVT or VIPT caches.  Note that this is unreliable since ARM926
+ * and V6 CPUs satisfy the "(val & (15 << 25)) == (14 << 25)" test.
+ * There's no way to tell from the CacheType register what type (!)
+ * the cache is.
+ */
+#define cache_is_vivt()							\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		(!__cacheid_present(__val)) || __cacheid_vivt(__val);	\
+	})
+		
+#define cache_is_vipt()							\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) && __cacheid_vipt(__val);	\
+	})
+
+#define cache_is_vipt_nonaliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) &&				\
+		 __cacheid_vipt_nonaliasing(__val);			\
+	})
+
+#define cache_is_vipt_aliasing()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) &&				\
+		 __cacheid_vipt_aliasing(__val);			\
+	})
+
+#define icache_is_vivt_asid_tagged()					\
+	({								\
+		unsigned int __val = read_cpuid(CPUID_CACHETYPE);	\
+		__cacheid_present(__val) &&				\
+		 __cacheid_vivt_asid_tagged_instr(__val);		\
+	})
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/checksum.h b/arch/arm/include/asm/checksum.h
new file mode 100644
index 000000000000..6dcc16430868
--- /dev/null
+++ b/arch/arm/include/asm/checksum.h
@@ -0,0 +1,139 @@
+/*
+ *  arch/arm/include/asm/checksum.h
+ *
+ * IP checksum routines
+ *
+ * Copyright (C) Original authors of ../asm-i386/checksum.h
+ * Copyright (C) 1996-1999 Russell King
+ */
+#ifndef __ASM_ARM_CHECKSUM_H
+#define __ASM_ARM_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums, and handles user-space pointer exceptions correctly, when needed.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+__wsum
+csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum);
+
+__wsum
+csum_partial_copy_from_user(const void __user *src, void *dst, int len, __wsum sum, int *err_ptr);
+
+/*
+ * 	Fold a partial checksum without adding pseudo headers
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+	__asm__(
+	"add	%0, %1, %1, ror #16	@ csum_fold"
+	: "=r" (sum)
+	: "r" (sum)
+	: "cc");
+	return (__force __sum16)(~(__force u32)sum >> 16);
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ */
+static inline __sum16
+ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int tmp1;
+	__wsum sum;
+
+	__asm__ __volatile__(
+	"ldr	%0, [%1], #4		@ ip_fast_csum		\n\
+	ldr	%3, [%1], #4					\n\
+	sub	%2, %2, #5					\n\
+	adds	%0, %0, %3					\n\
+	ldr	%3, [%1], #4					\n\
+	adcs	%0, %0, %3					\n\
+	ldr	%3, [%1], #4					\n\
+1:	adcs	%0, %0, %3					\n\
+	ldr	%3, [%1], #4					\n\
+	tst	%2, #15			@ do this carefully	\n\
+	subne	%2, %2, #1		@ without destroying	\n\
+	bne	1b			@ the carry flag	\n\
+	adcs	%0, %0, %3					\n\
+	adc	%0, %0, #0"
+	: "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1)
+	: "1" (iph), "2" (ihl)
+	: "cc", "memory");
+	return csum_fold(sum);
+}
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+		   unsigned short proto, __wsum sum)
+{
+	__asm__(
+	"adds	%0, %1, %2		@ csum_tcpudp_nofold	\n\
+	adcs	%0, %0, %3					\n"
+#ifdef __ARMEB__
+	"adcs	%0, %0, %4					\n"
+#else
+	"adcs	%0, %0, %4, lsl #8				\n"
+#endif
+	"adcs	%0, %0, %5					\n\
+	adc	%0, %0, #0"
+	: "=&r"(sum)
+	: "r" (sum), "r" (daddr), "r" (saddr), "r" (len), "Ir" (htons(proto))
+	: "cc");
+	return sum;
+}	
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+		  unsigned short proto, __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline __sum16
+ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+extern __wsum
+__csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __be32 len,
+		__be32 proto, __wsum sum);
+
+static inline __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, __u32 len,
+		unsigned short proto, __wsum sum)
+{
+	return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len),
+					   htonl(proto), sum));
+}
+#endif
diff --git a/arch/arm/include/asm/cnt32_to_63.h b/arch/arm/include/asm/cnt32_to_63.h
new file mode 100644
index 000000000000..480c873fa746
--- /dev/null
+++ b/arch/arm/include/asm/cnt32_to_63.h
@@ -0,0 +1,78 @@
+/*
+ *  include/asm/cnt32_to_63.h -- extend a 32-bit counter to 63 bits
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	December 3, 2006
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef __INCLUDE_CNT32_TO_63_H__
+#define __INCLUDE_CNT32_TO_63_H__
+
+#include <linux/compiler.h>
+#include <asm/types.h>
+#include <asm/byteorder.h>
+
+/*
+ * Prototype: u64 cnt32_to_63(u32 cnt)
+ * Many hardware clock counters are only 32 bits wide and therefore have
+ * a relatively short period making wrap-arounds rather frequent.  This
+ * is a problem when implementing sched_clock() for example, where a 64-bit
+ * non-wrapping monotonic value is expected to be returned.
+ *
+ * To overcome that limitation, let's extend a 32-bit counter to 63 bits
+ * in a completely lock free fashion. Bits 0 to 31 of the clock are provided
+ * by the hardware while bits 32 to 62 are stored in memory.  The top bit in
+ * memory is used to synchronize with the hardware clock half-period.  When
+ * the top bit of both counters (hardware and in memory) differ then the
+ * memory is updated with a new value, incrementing it when the hardware
+ * counter wraps around.
+ *
+ * Because a word store in memory is atomic then the incremented value will
+ * always be in synch with the top bit indicating to any potential concurrent
+ * reader if the value in memory is up to date or not with regards to the
+ * needed increment.  And any race in updating the value in memory is harmless
+ * as the same value would simply be stored more than once.
+ *
+ * The only restriction for the algorithm to work properly is that this
+ * code must be executed at least once per each half period of the 32-bit
+ * counter to properly update the state bit in memory. This is usually not a
+ * problem in practice, but if it is then a kernel timer could be scheduled
+ * to manage for this code to be executed often enough.
+ *
+ * Note that the top bit (bit 63) in the returned value should be considered
+ * as garbage.  It is not cleared here because callers are likely to use a
+ * multiplier on the returned value which can get rid of the top bit
+ * implicitly by making the multiplier even, therefore saving on a runtime
+ * clear-bit instruction. Otherwise caller must remember to clear the top
+ * bit explicitly.
+ */
+
+/* this is used only to give gcc a clue about good code generation */
+typedef union {
+	struct {
+#if defined(__LITTLE_ENDIAN)
+		u32 lo, hi;
+#elif defined(__BIG_ENDIAN)
+		u32 hi, lo;
+#endif
+	};
+	u64 val;
+} cnt32_to_63_t;
+
+#define cnt32_to_63(cnt_lo) \
+({ \
+	static volatile u32 __m_cnt_hi = 0; \
+	cnt32_to_63_t __x; \
+	__x.hi = __m_cnt_hi; \
+	__x.lo = (cnt_lo); \
+ 	if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \
+		__m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \
+	__x.val; \
+})
+
+#endif
diff --git a/arch/arm/include/asm/cpu-multi32.h b/arch/arm/include/asm/cpu-multi32.h
new file mode 100644
index 000000000000..e2b5b0b2116a
--- /dev/null
+++ b/arch/arm/include/asm/cpu-multi32.h
@@ -0,0 +1,69 @@
+/*
+ *  arch/arm/include/asm/cpu-multi32.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/page.h>
+
+struct mm_struct;
+
+/*
+ * Don't change this structure - ASM code
+ * relies on it.
+ */
+extern struct processor {
+	/* MISC
+	 * get data abort address/flags
+	 */
+	void (*_data_abort)(unsigned long pc);
+	/*
+	 * Retrieve prefetch fault address
+	 */
+	unsigned long (*_prefetch_abort)(unsigned long lr);
+	/*
+	 * Set up any processor specifics
+	 */
+	void (*_proc_init)(void);
+	/*
+	 * Disable any processor specifics
+	 */
+	void (*_proc_fin)(void);
+	/*
+	 * Special stuff for a reset
+	 */
+	void (*reset)(unsigned long addr) __attribute__((noreturn));
+	/*
+	 * Idle the processor
+	 */
+	int (*_do_idle)(void);
+	/*
+	 * Processor architecture specific
+	 */
+	/*
+	 * clean a virtual address range from the
+	 * D-cache without flushing the cache.
+	 */
+	void (*dcache_clean_area)(void *addr, int size);
+
+	/*
+	 * Set the page table
+	 */
+	void (*switch_mm)(unsigned long pgd_phys, struct mm_struct *mm);
+	/*
+	 * Set a possibly extended PTE.  Non-extended PTEs should
+	 * ignore 'ext'.
+	 */
+	void (*set_pte_ext)(pte_t *ptep, pte_t pte, unsigned int ext);
+} processor;
+
+#define cpu_proc_init()			processor._proc_init()
+#define cpu_proc_fin()			processor._proc_fin()
+#define cpu_reset(addr)			processor.reset(addr)
+#define cpu_do_idle()			processor._do_idle()
+#define cpu_dcache_clean_area(addr,sz)	processor.dcache_clean_area(addr,sz)
+#define cpu_set_pte_ext(ptep,pte,ext)	processor.set_pte_ext(ptep,pte,ext)
+#define cpu_do_switch_mm(pgd,mm)	processor.switch_mm(pgd,mm)
diff --git a/arch/arm/include/asm/cpu-single.h b/arch/arm/include/asm/cpu-single.h
new file mode 100644
index 000000000000..f073a6d2a406
--- /dev/null
+++ b/arch/arm/include/asm/cpu-single.h
@@ -0,0 +1,44 @@
+/*
+ *  arch/arm/include/asm/cpu-single.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/*
+ * Single CPU
+ */
+#ifdef __STDC__
+#define __catify_fn(name,x)	name##x
+#else
+#define __catify_fn(name,x)	name/**/x
+#endif
+#define __cpu_fn(name,x)	__catify_fn(name,x)
+
+/*
+ * If we are supporting multiple CPUs, then we must use a table of
+ * function pointers for this lot.  Otherwise, we can optimise the
+ * table away.
+ */
+#define cpu_proc_init			__cpu_fn(CPU_NAME,_proc_init)
+#define cpu_proc_fin			__cpu_fn(CPU_NAME,_proc_fin)
+#define cpu_reset			__cpu_fn(CPU_NAME,_reset)
+#define cpu_do_idle			__cpu_fn(CPU_NAME,_do_idle)
+#define cpu_dcache_clean_area		__cpu_fn(CPU_NAME,_dcache_clean_area)
+#define cpu_do_switch_mm		__cpu_fn(CPU_NAME,_switch_mm)
+#define cpu_set_pte_ext			__cpu_fn(CPU_NAME,_set_pte_ext)
+
+#include <asm/page.h>
+
+struct mm_struct;
+
+/* declare all the functions as extern */
+extern void cpu_proc_init(void);
+extern void cpu_proc_fin(void);
+extern int cpu_do_idle(void);
+extern void cpu_dcache_clean_area(void *, int);
+extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
+extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
+extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
diff --git a/arch/arm/include/asm/cpu.h b/arch/arm/include/asm/cpu.h
new file mode 100644
index 000000000000..634b2d7c612a
--- /dev/null
+++ b/arch/arm/include/asm/cpu.h
@@ -0,0 +1,25 @@
+/*
+ *  arch/arm/include/asm/cpu.h
+ *
+ *  Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_CPU_H
+#define __ASM_ARM_CPU_H
+
+#include <linux/percpu.h>
+
+struct cpuinfo_arm {
+	struct cpu	cpu;
+#ifdef CONFIG_SMP
+	struct task_struct *idle;
+	unsigned int	loops_per_jiffy;
+#endif
+};
+
+DECLARE_PER_CPU(struct cpuinfo_arm, cpu_data);
+
+#endif
diff --git a/arch/arm/include/asm/cputime.h b/arch/arm/include/asm/cputime.h
new file mode 100644
index 000000000000..3a8002a5fec7
--- /dev/null
+++ b/arch/arm/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __ARM_CPUTIME_H
+#define __ARM_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __ARM_CPUTIME_H */
diff --git a/arch/arm/include/asm/current.h b/arch/arm/include/asm/current.h
new file mode 100644
index 000000000000..75d21e2a3ff7
--- /dev/null
+++ b/arch/arm/include/asm/current.h
@@ -0,0 +1,15 @@
+#ifndef _ASMARM_CURRENT_H
+#define _ASMARM_CURRENT_H
+
+#include <linux/thread_info.h>
+
+static inline struct task_struct *get_current(void) __attribute_const__;
+
+static inline struct task_struct *get_current(void)
+{
+	return current_thread_info()->task;
+}
+
+#define current (get_current())
+
+#endif /* _ASMARM_CURRENT_H */
diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h
new file mode 100644
index 000000000000..b2deda181549
--- /dev/null
+++ b/arch/arm/include/asm/delay.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 1995-2004 Russell King
+ *
+ * Delay routines, using a pre-computed "loops_per_second" value.
+ */
+#ifndef __ASM_ARM_DELAY_H
+#define __ASM_ARM_DELAY_H
+
+#include <asm/param.h>	/* HZ */
+
+extern void __delay(int loops);
+
+/*
+ * This function intentionally does not exist; if you see references to
+ * it, it means that you're calling udelay() with an out of range value.
+ *
+ * With currently imposed limits, this means that we support a max delay
+ * of 2000us. Further limits: HZ<=1000 and bogomips<=3355
+ */
+extern void __bad_udelay(void);
+
+/*
+ * division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+extern void __udelay(unsigned long usecs);
+extern void __const_udelay(unsigned long);
+
+#define MAX_UDELAY_MS 2
+
+#define udelay(n)							\
+	(__builtin_constant_p(n) ?					\
+	  ((n) > (MAX_UDELAY_MS * 1000) ? __bad_udelay() :		\
+			__const_udelay((n) * ((2199023U*HZ)>>11))) :	\
+	  __udelay(n))
+
+#endif /* defined(_ARM_DELAY_H) */
+
diff --git a/arch/arm/include/asm/device.h b/arch/arm/include/asm/device.h
new file mode 100644
index 000000000000..c61642b40603
--- /dev/null
+++ b/arch/arm/include/asm/device.h
@@ -0,0 +1,15 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#ifndef ASMARM_DEVICE_H
+#define ASMARM_DEVICE_H
+
+struct dev_archdata {
+#ifdef CONFIG_DMABOUNCE
+	struct dmabounce_device_info *dmabounce;
+#endif
+};
+
+#endif
diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h
new file mode 100644
index 000000000000..5001390be958
--- /dev/null
+++ b/arch/arm/include/asm/div64.h
@@ -0,0 +1,227 @@
+#ifndef __ASM_ARM_DIV64
+#define __ASM_ARM_DIV64
+
+#include <asm/system.h>
+#include <linux/types.h>
+
+/*
+ * The semantics of do_div() are:
+ *
+ * uint32_t do_div(uint64_t *n, uint32_t base)
+ * {
+ * 	uint32_t remainder = *n % base;
+ * 	*n = *n / base;
+ * 	return remainder;
+ * }
+ *
+ * In other words, a 64-bit dividend with a 32-bit divisor producing
+ * a 64-bit result and a 32-bit remainder.  To accomplish this optimally
+ * we call a special __do_div64 helper with completely non standard
+ * calling convention for arguments and results (beware).
+ */
+
+#ifdef __ARMEB__
+#define __xh "r0"
+#define __xl "r1"
+#else
+#define __xl "r0"
+#define __xh "r1"
+#endif
+
+#define __do_div_asm(n, base)					\
+({								\
+	register unsigned int __base      asm("r4") = base;	\
+	register unsigned long long __n   asm("r0") = n;	\
+	register unsigned long long __res asm("r2");		\
+	register unsigned int __rem       asm(__xh);		\
+	asm(	__asmeq("%0", __xh)				\
+		__asmeq("%1", "r2")				\
+		__asmeq("%2", "r0")				\
+		__asmeq("%3", "r4")				\
+		"bl	__do_div64"				\
+		: "=r" (__rem), "=r" (__res)			\
+		: "r" (__n), "r" (__base)			\
+		: "ip", "lr", "cc");				\
+	n = __res;						\
+	__rem;							\
+})
+
+#if __GNUC__ < 4
+
+/*
+ * gcc versions earlier than 4.0 are simply too problematic for the
+ * optimized implementation below. First there is gcc PR 15089 that
+ * tend to trig on more complex constructs, spurious .global __udivsi3
+ * are inserted even if none of those symbols are referenced in the
+ * generated code, and those gcc versions are not able to do constant
+ * propagation on long long values anyway.
+ */
+#define do_div(n, base) __do_div_asm(n, base)
+
+#elif __GNUC__ >= 4
+
+#include <asm/bug.h>
+
+/*
+ * If the divisor happens to be constant, we determine the appropriate
+ * inverse at compile time to turn the division into a few inline
+ * multiplications instead which is much faster. And yet only if compiling
+ * for ARMv4 or higher (we need umull/umlal) and if the gcc version is
+ * sufficiently recent to perform proper long long constant propagation.
+ * (It is unfortunate that gcc doesn't perform all this internally.)
+ */
+#define do_div(n, base)							\
+({									\
+	unsigned int __r, __b = (base);					\
+	if (!__builtin_constant_p(__b) || __b == 0 ||			\
+	    (__LINUX_ARM_ARCH__ < 4 && (__b & (__b - 1)) != 0)) {	\
+		/* non-constant divisor (or zero): slow path */		\
+		__r = __do_div_asm(n, __b);				\
+	} else if ((__b & (__b - 1)) == 0) {				\
+		/* Trivial: __b is constant and a power of 2 */		\
+		/* gcc does the right thing with this code.  */		\
+		__r = n;						\
+		__r &= (__b - 1);					\
+		n /= __b;						\
+	} else {							\
+		/* Multiply by inverse of __b: n/b = n*(p/b)/p       */	\
+		/* We rely on the fact that most of this code gets   */	\
+		/* optimized away at compile time due to constant    */	\
+		/* propagation and only a couple inline assembly     */	\
+		/* instructions should remain. Better avoid any      */	\
+		/* code construct that might prevent that.           */	\
+		unsigned long long __res, __x, __t, __m, __n = n;	\
+		unsigned int __c, __p, __z = 0;				\
+		/* preserve low part of n for reminder computation */	\
+		__r = __n;						\
+		/* determine number of bits to represent __b */		\
+		__p = 1 << __div64_fls(__b);				\
+		/* compute __m = ((__p << 64) + __b - 1) / __b */	\
+		__m = (~0ULL / __b) * __p;				\
+		__m += (((~0ULL % __b + 1) * __p) + __b - 1) / __b;	\
+		/* compute __res = __m*(~0ULL/__b*__b-1)/(__p << 64) */	\
+		__x = ~0ULL / __b * __b - 1;				\
+		__res = (__m & 0xffffffff) * (__x & 0xffffffff);	\
+		__res >>= 32;						\
+		__res += (__m & 0xffffffff) * (__x >> 32);		\
+		__t = __res;						\
+		__res += (__x & 0xffffffff) * (__m >> 32);		\
+		__t = (__res < __t) ? (1ULL << 32) : 0;			\
+		__res = (__res >> 32) + __t;				\
+		__res += (__m >> 32) * (__x >> 32);			\
+		__res /= __p;						\
+		/* Now sanitize and optimize what we've got. */		\
+		if (~0ULL % (__b / (__b & -__b)) == 0) {		\
+			/* those cases can be simplified with: */	\
+			__n /= (__b & -__b);				\
+			__m = ~0ULL / (__b / (__b & -__b));		\
+			__p = 1;					\
+			__c = 1;					\
+		} else if (__res != __x / __b) {			\
+			/* We can't get away without a correction    */	\
+			/* to compensate for bit truncation errors.  */	\
+			/* To avoid it we'd need an additional bit   */	\
+			/* to represent __m which would overflow it. */	\
+			/* Instead we do m=p/b and n/b=(n*m+m)/p.    */	\
+			__c = 1;					\
+			/* Compute __m = (__p << 64) / __b */		\
+			__m = (~0ULL / __b) * __p;			\
+			__m += ((~0ULL % __b + 1) * __p) / __b;		\
+		} else {						\
+			/* Reduce __m/__p, and try to clear bit 31   */	\
+			/* of __m when possible otherwise that'll    */	\
+			/* need extra overflow handling later.       */	\
+			unsigned int __bits = -(__m & -__m);		\
+			__bits |= __m >> 32;				\
+			__bits = (~__bits) << 1;			\
+			/* If __bits == 0 then setting bit 31 is     */	\
+			/* unavoidable.  Simply apply the maximum    */	\
+			/* possible reduction in that case.          */	\
+			/* Otherwise the MSB of __bits indicates the */	\
+			/* best reduction we should apply.           */	\
+			if (!__bits) {					\
+				__p /= (__m & -__m);			\
+				__m /= (__m & -__m);			\
+			} else {					\
+				__p >>= __div64_fls(__bits);		\
+				__m >>= __div64_fls(__bits);		\
+			}						\
+			/* No correction needed. */			\
+			__c = 0;					\
+		}							\
+		/* Now we have a combination of 2 conditions:        */	\
+		/* 1) whether or not we need a correction (__c), and */	\
+		/* 2) whether or not there might be an overflow in   */	\
+		/*    the cross product (__m & ((1<<63) | (1<<31)))  */	\
+		/* Select the best insn combination to perform the   */	\
+		/* actual __m * __n / (__p << 64) operation.         */	\
+		if (!__c) {						\
+			asm (	"umull	%Q0, %R0, %1, %Q2\n\t"		\
+				"mov	%Q0, #0"			\
+				: "=&r" (__res)				\
+				: "r" (__m), "r" (__n)			\
+				: "cc" );				\
+		} else if (!(__m & ((1ULL << 63) | (1ULL << 31)))) {	\
+			__res = __m;					\
+			asm (	"umlal	%Q0, %R0, %Q1, %Q2\n\t"		\
+				"mov	%Q0, #0"			\
+				: "+r" (__res)				\
+				: "r" (__m), "r" (__n)			\
+				: "cc" );				\
+		} else {						\
+			asm (	"umull	%Q0, %R0, %Q1, %Q2\n\t"		\
+				"cmn	%Q0, %Q1\n\t"			\
+				"adcs	%R0, %R0, %R1\n\t"		\
+				"adc	%Q0, %3, #0"			\
+				: "=&r" (__res)				\
+				: "r" (__m), "r" (__n), "r" (__z)	\
+				: "cc" );				\
+		}							\
+		if (!(__m & ((1ULL << 63) | (1ULL << 31)))) {		\
+			asm (	"umlal	%R0, %Q0, %R1, %Q2\n\t"		\
+				"umlal	%R0, %Q0, %Q1, %R2\n\t"		\
+				"mov	%R0, #0\n\t"			\
+				"umlal	%Q0, %R0, %R1, %R2"		\
+				: "+r" (__res)				\
+				: "r" (__m), "r" (__n)			\
+				: "cc" );				\
+		} else {						\
+			asm (	"umlal	%R0, %Q0, %R2, %Q3\n\t"		\
+				"umlal	%R0, %1, %Q2, %R3\n\t"		\
+				"mov	%R0, #0\n\t"			\
+				"adds	%Q0, %1, %Q0\n\t"		\
+				"adc	%R0, %R0, #0\n\t"		\
+				"umlal	%Q0, %R0, %R2, %R3"		\
+				: "+r" (__res), "+r" (__z)		\
+				: "r" (__m), "r" (__n)			\
+				: "cc" );				\
+		}							\
+		__res /= __p;						\
+		/* The reminder can be computed with 32-bit regs     */	\
+		/* only, and gcc is good at that.                    */	\
+		{							\
+			unsigned int __res0 = __res;			\
+			unsigned int __b0 = __b;			\
+			__r -= __res0 * __b0;				\
+		}							\
+		/* BUG_ON(__r >= __b || __res * __b + __r != n); */	\
+		n = __res;						\
+	}								\
+	__r;								\
+})
+
+/* our own fls implementation to make sure constant propagation is fine */
+#define __div64_fls(bits)						\
+({									\
+	unsigned int __left = (bits), __nr = 0;				\
+	if (__left & 0xffff0000) __nr += 16, __left >>= 16;		\
+	if (__left & 0x0000ff00) __nr +=  8, __left >>=  8;		\
+	if (__left & 0x000000f0) __nr +=  4, __left >>=  4;		\
+	if (__left & 0x0000000c) __nr +=  2, __left >>=  2;		\
+	if (__left & 0x00000002) __nr +=  1;				\
+	__nr;								\
+})
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..45329fca1b64
--- /dev/null
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -0,0 +1,458 @@
+#ifndef ASMARM_DMA_MAPPING_H
+#define ASMARM_DMA_MAPPING_H
+
+#ifdef __KERNEL__
+
+#include <linux/mm.h> /* need struct page */
+
+#include <linux/scatterlist.h>
+
+#include <asm-generic/dma-coherent.h>
+
+/*
+ * DMA-consistent mapping functions.  These allocate/free a region of
+ * uncached, unwrite-buffered mapped memory space for use with DMA
+ * devices.  This is the "generic" version.  The PCI specific version
+ * is in pci.h
+ *
+ * Note: Drivers should NOT use this function directly, as it will break
+ * platforms with CONFIG_DMABOUNCE.
+ * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
+ */
+extern void dma_cache_maint(const void *kaddr, size_t size, int rw);
+
+/*
+ * Return whether the given device DMA address mask can be supported
+ * properly.  For example, if your device can only drive the low 24-bits
+ * during bus mastering, then you would pass 0x00ffffff as the mask
+ * to this function.
+ *
+ * FIXME: This should really be a platform specific issue - we should
+ * return false if GFP_DMA allocations may not satisfy the supplied 'mask'.
+ */
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	return dev->dma_mask && *dev->dma_mask != 0;
+}
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+
+	*dev->dma_mask = dma_mask;
+
+	return 0;
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+	return 32;
+}
+
+static inline int dma_is_consistent(struct device *dev, dma_addr_t handle)
+{
+	return !!arch_is_coherent();
+}
+
+/*
+ * DMA errors are defined by all-bits-set in the DMA address.
+ */
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return dma_addr == ~0;
+}
+
+/*
+ * Dummy noncoherent implementation.  We don't provide a dma_cache_sync
+ * function so drivers using this API are highlighted with build warnings.
+ */
+static inline void *
+dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+	return NULL;
+}
+
+static inline void
+dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
+		     dma_addr_t handle)
+{
+}
+
+/**
+ * dma_alloc_coherent - allocate consistent memory for DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: required memory size
+ * @handle: bus-specific DMA address
+ *
+ * Allocate some uncached, unbuffered memory for a device for
+ * performing DMA.  This function allocates pages, and will
+ * return the CPU-viewed address, and sets @handle to be the
+ * device-viewed address.
+ */
+extern void *
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
+
+/**
+ * dma_free_coherent - free memory allocated by dma_alloc_coherent
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: size of memory originally requested in dma_alloc_coherent
+ * @cpu_addr: CPU-view address returned from dma_alloc_coherent
+ * @handle: device-view address returned from dma_alloc_coherent
+ *
+ * Free (and unmap) a DMA buffer previously allocated by
+ * dma_alloc_coherent().
+ *
+ * References to memory and mappings associated with cpu_addr/handle
+ * during and after this call executing are illegal.
+ */
+extern void
+dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+		  dma_addr_t handle);
+
+/**
+ * dma_mmap_coherent - map a coherent DMA allocation into user space
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @vma: vm_area_struct describing requested user mapping
+ * @cpu_addr: kernel CPU-view address returned from dma_alloc_coherent
+ * @handle: device-view address returned from dma_alloc_coherent
+ * @size: size of memory originally requested in dma_alloc_coherent
+ *
+ * Map a coherent DMA buffer previously allocated by dma_alloc_coherent
+ * into user space.  The coherent DMA buffer must not be freed by the
+ * driver until the user space mapping has been released.
+ */
+int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
+		      void *cpu_addr, dma_addr_t handle, size_t size);
+
+
+/**
+ * dma_alloc_writecombine - allocate writecombining memory for DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: required memory size
+ * @handle: bus-specific DMA address
+ *
+ * Allocate some uncached, buffered memory for a device for
+ * performing DMA.  This function allocates pages, and will
+ * return the CPU-viewed address, and sets @handle to be the
+ * device-viewed address.
+ */
+extern void *
+dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
+
+#define dma_free_writecombine(dev,size,cpu_addr,handle) \
+	dma_free_coherent(dev,size,cpu_addr,handle)
+
+int dma_mmap_writecombine(struct device *dev, struct vm_area_struct *vma,
+			  void *cpu_addr, dma_addr_t handle, size_t size);
+
+
+/**
+ * dma_map_single - map a single buffer for streaming DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @cpu_addr: CPU direct mapped address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Ensure that any data held in the cache is appropriately discarded
+ * or written back.
+ *
+ * The device owns this memory once this call has completed.  The CPU
+ * can regain ownership by calling dma_unmap_single() or
+ * dma_sync_single_for_cpu().
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+	       enum dma_data_direction dir)
+{
+	if (!arch_is_coherent())
+		dma_cache_maint(cpu_addr, size, dir);
+
+	return virt_to_dma(dev, (unsigned long)cpu_addr);
+}
+#else
+extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction);
+#endif
+
+/**
+ * dma_map_page - map a portion of a page for streaming DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @page: page that buffer resides in
+ * @offset: offset into page for start of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Ensure that any data held in the cache is appropriately discarded
+ * or written back.
+ *
+ * The device owns this memory once this call has completed.  The CPU
+ * can regain ownership by calling dma_unmap_page() or
+ * dma_sync_single_for_cpu().
+ */
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction dir)
+{
+	return dma_map_single(dev, page_address(page) + offset, size, (int)dir);
+}
+
+/**
+ * dma_unmap_single - unmap a single buffer previously mapped
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a single streaming mode DMA translation.  The handle and size
+ * must match what was provided in the previous dma_map_single() call.
+ * All other usages are undefined.
+ *
+ * After this call, reads by the CPU to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size,
+		 enum dma_data_direction dir)
+{
+	/* nothing to do */
+}
+#else
+extern void dma_unmap_single(struct device *, dma_addr_t, size_t, enum dma_data_direction);
+#endif
+
+/**
+ * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a single streaming mode DMA translation.  The handle and size
+ * must match what was provided in the previous dma_map_single() call.
+ * All other usages are undefined.
+ *
+ * After this call, reads by the CPU to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size,
+	       enum dma_data_direction dir)
+{
+	dma_unmap_single(dev, handle, size, (int)dir);
+}
+
+/**
+ * dma_map_sg - map a set of SG buffers for streaming mode DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Map a set of buffers described by scatterlist in streaming
+ * mode for DMA.  This is the scatter-gather version of the
+ * above dma_map_single interface.  Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ *       DMA address/length pairs than there are SG table elements.
+ *       (for example via virtual mapping capabilities)
+ *       The routine returns the number of addr/length pairs actually
+ *       used, at most nents.
+ *
+ * Device ownership issues as mentioned above for dma_map_single are
+ * the same here.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nents; i++, sg++) {
+		char *virt;
+
+		sg->dma_address = page_to_dma(dev, sg_page(sg)) + sg->offset;
+		virt = sg_virt(sg);
+
+		if (!arch_is_coherent())
+			dma_cache_maint(virt, sg->length, dir);
+	}
+
+	return nents;
+}
+#else
+extern int dma_map_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
+#endif
+
+/**
+ * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a set of streaming mode DMA translations.
+ * Again, CPU read rules concerning calls here are the same as for
+ * dma_unmap_single() above.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents,
+	     enum dma_data_direction dir)
+{
+
+	/* nothing to do */
+}
+#else
+extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_data_direction);
+#endif
+
+
+/**
+ * dma_sync_single_for_cpu
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Make physical memory consistent for a single streaming mode DMA
+ * translation after a transfer.
+ *
+ * If you perform a dma_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the PCI dma
+ * mapping, you must call this function before doing so.  At the
+ * next point you give the PCI dma address back to the card, you
+ * must first the perform a dma_sync_for_device, and then the
+ * device again owns the buffer.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size,
+			enum dma_data_direction dir)
+{
+	if (!arch_is_coherent())
+		dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir);
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size,
+			   enum dma_data_direction dir)
+{
+	if (!arch_is_coherent())
+		dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir);
+}
+#else
+extern void dma_sync_single_for_cpu(struct device*, dma_addr_t, size_t, enum dma_data_direction);
+extern void dma_sync_single_for_device(struct device*, dma_addr_t, size_t, enum dma_data_direction);
+#endif
+
+
+/**
+ * dma_sync_sg_for_cpu
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as dma_sync_single_for_* but for a scatter-gather list,
+ * same rules and usage.
+ */
+#ifndef CONFIG_DMABOUNCE
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents,
+		    enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nents; i++, sg++) {
+		char *virt = sg_virt(sg);
+		if (!arch_is_coherent())
+			dma_cache_maint(virt, sg->length, dir);
+	}
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nents,
+		       enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nents; i++, sg++) {
+		char *virt = sg_virt(sg);
+		if (!arch_is_coherent())
+			dma_cache_maint(virt, sg->length, dir);
+	}
+}
+#else
+extern void dma_sync_sg_for_cpu(struct device*, struct scatterlist*, int, enum dma_data_direction);
+extern void dma_sync_sg_for_device(struct device*, struct scatterlist*, int, enum dma_data_direction);
+#endif
+
+#ifdef CONFIG_DMABOUNCE
+/*
+ * For SA-1111, IXP425, and ADI systems  the dma-mapping functions are "magic"
+ * and utilize bounce buffers as needed to work around limited DMA windows.
+ *
+ * On the SA-1111, a bug limits DMA to only certain regions of RAM.
+ * On the IXP425, the PCI inbound window is 64MB (256MB total RAM)
+ * On some ADI engineering systems, PCI inbound window is 32MB (12MB total RAM)
+ *
+ * The following are helper functions used by the dmabounce subystem
+ *
+ */
+
+/**
+ * dmabounce_register_dev
+ *
+ * @dev: valid struct device pointer
+ * @small_buf_size: size of buffers to use with small buffer pool
+ * @large_buf_size: size of buffers to use with large buffer pool (can be 0)
+ *
+ * This function should be called by low-level platform code to register
+ * a device as requireing DMA buffer bouncing. The function will allocate
+ * appropriate DMA pools for the device.
+ *
+ */
+extern int dmabounce_register_dev(struct device *, unsigned long, unsigned long);
+
+/**
+ * dmabounce_unregister_dev
+ *
+ * @dev: valid struct device pointer
+ *
+ * This function should be called by low-level platform code when device
+ * that was previously registered with dmabounce_register_dev is removed
+ * from the system.
+ *
+ */
+extern void dmabounce_unregister_dev(struct device *);
+
+/**
+ * dma_needs_bounce
+ *
+ * @dev: valid struct device pointer
+ * @dma_handle: dma_handle of unbounced buffer
+ * @size: size of region being mapped
+ *
+ * Platforms that utilize the dmabounce mechanism must implement
+ * this function.
+ *
+ * The dmabounce routines call this function whenever a dma-mapping
+ * is requested to determine whether a given buffer needs to be bounced
+ * or not. The function must return 0 if the buffer is OK for
+ * DMA access and 1 if the buffer needs to be bounced.
+ *
+ */
+extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
+#endif /* CONFIG_DMABOUNCE */
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
new file mode 100644
index 000000000000..75154b193117
--- /dev/null
+++ b/arch/arm/include/asm/dma.h
@@ -0,0 +1,143 @@
+#ifndef __ASM_ARM_DMA_H
+#define __ASM_ARM_DMA_H
+
+typedef unsigned int dmach_t;
+
+#include <linux/spinlock.h>
+#include <asm/system.h>
+#include <asm/scatterlist.h>
+#include <mach/dma.h>
+
+/*
+ * This is the maximum virtual address which can be DMA'd from.
+ */
+#ifndef MAX_DMA_ADDRESS
+#define MAX_DMA_ADDRESS	0xffffffff
+#endif
+
+/*
+ * DMA modes
+ */
+typedef unsigned int dmamode_t;
+
+#define DMA_MODE_MASK	3
+
+#define DMA_MODE_READ	 0
+#define DMA_MODE_WRITE	 1
+#define DMA_MODE_CASCADE 2
+#define DMA_AUTOINIT	 4
+
+extern spinlock_t  dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ */
+#define clear_dma_ff(channel)
+
+/* Set only the page register bits of the transfer address.
+ *
+ * NOTE: This is an architecture specific function, and should
+ *       be hidden from the drivers
+ */
+extern void set_dma_page(dmach_t channel, char pagenr);
+
+/* Request a DMA channel
+ *
+ * Some architectures may need to do allocate an interrupt
+ */
+extern int  request_dma(dmach_t channel, const char * device_id);
+
+/* Free a DMA channel
+ *
+ * Some architectures may need to do free an interrupt
+ */
+extern void free_dma(dmach_t channel);
+
+/* Enable DMA for this channel
+ *
+ * On some architectures, this may have other side effects like
+ * enabling an interrupt and setting the DMA registers.
+ */
+extern void enable_dma(dmach_t channel);
+
+/* Disable DMA for this channel
+ *
+ * On some architectures, this may have other side effects like
+ * disabling an interrupt or whatever.
+ */
+extern void disable_dma(dmach_t channel);
+
+/* Test whether the specified channel has an active DMA transfer
+ */
+extern int dma_channel_active(dmach_t channel);
+
+/* Set the DMA scatter gather list for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA address immediately, but defer it to the enable_dma().
+ */
+extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg);
+
+/* Set the DMA address for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA address immediately, but defer it to the enable_dma().
+ */
+extern void __set_dma_addr(dmach_t channel, void *addr);
+#define set_dma_addr(channel, addr)				\
+	__set_dma_addr(channel, bus_to_virt(addr))
+
+/* Set the DMA byte count for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA count immediately, but defer it to the enable_dma().
+ */
+extern void set_dma_count(dmach_t channel, unsigned long count);
+
+/* Set the transfer direction for this channel
+ *
+ * This should not be called if a DMA channel is enabled,
+ * especially since some DMA architectures don't update the
+ * DMA transfer direction immediately, but defer it to the
+ * enable_dma().
+ */
+extern void set_dma_mode(dmach_t channel, dmamode_t mode);
+
+/* Set the transfer speed for this channel
+ */
+extern void set_dma_speed(dmach_t channel, int cycle_ns);
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+extern int  get_dma_residue(dmach_t channel);
+
+#ifndef NO_DMA
+#define NO_DMA	255
+#endif
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy    (0)
+#endif
+
+#endif /* _ARM_DMA_H */
diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h
new file mode 100644
index 000000000000..cc7ef4080711
--- /dev/null
+++ b/arch/arm/include/asm/domain.h
@@ -0,0 +1,78 @@
+/*
+ *  arch/arm/include/asm/domain.h
+ *
+ *  Copyright (C) 1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PROC_DOMAIN_H
+#define __ASM_PROC_DOMAIN_H
+
+/*
+ * Domain numbers
+ *
+ *  DOMAIN_IO     - domain 2 includes all IO only
+ *  DOMAIN_USER   - domain 1 includes all user memory only
+ *  DOMAIN_KERNEL - domain 0 includes all kernel memory only
+ *
+ * The domain numbering depends on whether we support 36 physical
+ * address for I/O or not.  Addresses above the 32 bit boundary can
+ * only be mapped using supersections and supersections can only
+ * be set for domain 0.  We could just default to DOMAIN_IO as zero,
+ * but there may be systems with supersection support and no 36-bit
+ * addressing.  In such cases, we want to map system memory with
+ * supersections to reduce TLB misses and footprint.
+ *
+ * 36-bit addressing and supersections are only available on
+ * CPUs based on ARMv6+ or the Intel XSC3 core.
+ */
+#ifndef CONFIG_IO_36
+#define DOMAIN_KERNEL	0
+#define DOMAIN_TABLE	0
+#define DOMAIN_USER	1
+#define DOMAIN_IO	2
+#else
+#define DOMAIN_KERNEL	2
+#define DOMAIN_TABLE	2
+#define DOMAIN_USER	1
+#define DOMAIN_IO	0
+#endif
+
+/*
+ * Domain types
+ */
+#define DOMAIN_NOACCESS	0
+#define DOMAIN_CLIENT	1
+#define DOMAIN_MANAGER	3
+
+#define domain_val(dom,type)	((type) << (2*(dom)))
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MMU
+#define set_domain(x)					\
+	do {						\
+	__asm__ __volatile__(				\
+	"mcr	p15, 0, %0, c3, c0	@ set domain"	\
+	  : : "r" (x));					\
+	isb();						\
+	} while (0)
+
+#define modify_domain(dom,type)					\
+	do {							\
+	struct thread_info *thread = current_thread_info();	\
+	unsigned int domain = thread->cpu_domain;		\
+	domain &= ~domain_val(dom, DOMAIN_MANAGER);		\
+	thread->cpu_domain = domain | domain_val(dom, type);	\
+	set_domain(thread->cpu_domain);				\
+	} while (0)
+
+#else
+#define set_domain(x)		do { } while (0)
+#define modify_domain(dom,type)	do { } while (0)
+#endif
+
+#endif
+#endif /* !__ASSEMBLY__ */
diff --git a/arch/arm/include/asm/ecard.h b/arch/arm/include/asm/ecard.h
new file mode 100644
index 000000000000..29f2610efc70
--- /dev/null
+++ b/arch/arm/include/asm/ecard.h
@@ -0,0 +1,219 @@
+/*
+ * arch/arm/include/asm/ecard.h
+ *
+ * definitions for expansion cards
+ *
+ * This is a new system as from Linux 1.2.3
+ *
+ * Changelog:
+ *  11-12-1996	RMK	Further minor improvements
+ *  12-09-1997	RMK	Added interrupt enable/disable for card level
+ *
+ * Reference: Acorns Risc OS 3 Programmers Reference Manuals.
+ */
+
+#ifndef __ASM_ECARD_H
+#define __ASM_ECARD_H
+
+/*
+ * Currently understood cards (but not necessarily
+ * supported):
+ *                        Manufacturer  Product ID
+ */
+#define MANU_ACORN		0x0000
+#define PROD_ACORN_SCSI			0x0002
+#define PROD_ACORN_ETHER1		0x0003
+#define PROD_ACORN_MFM			0x000b
+
+#define MANU_ANT2		0x0011
+#define PROD_ANT_ETHER3			0x00a4
+
+#define MANU_ATOMWIDE		0x0017
+#define PROD_ATOMWIDE_3PSERIAL		0x0090
+
+#define MANU_IRLAM_INSTRUMENTS	0x001f
+#define MANU_IRLAM_INSTRUMENTS_ETHERN	0x5678
+
+#define MANU_OAK		0x0021
+#define PROD_OAK_SCSI			0x0058
+
+#define MANU_MORLEY		0x002b
+#define PROD_MORLEY_SCSI_UNCACHED	0x0067
+
+#define MANU_CUMANA		0x003a
+#define PROD_CUMANA_SCSI_2		0x003a
+#define PROD_CUMANA_SCSI_1		0x00a0
+
+#define MANU_ICS		0x003c
+#define PROD_ICS_IDE			0x00ae
+
+#define MANU_ICS2		0x003d
+#define PROD_ICS2_IDE			0x00ae
+
+#define MANU_SERPORT		0x003f
+#define PROD_SERPORT_DSPORT		0x00b9
+
+#define MANU_ARXE		0x0041
+#define PROD_ARXE_SCSI			0x00be
+
+#define MANU_I3			0x0046
+#define PROD_I3_ETHERLAN500		0x00d4
+#define PROD_I3_ETHERLAN600		0x00ec
+#define PROD_I3_ETHERLAN600A		0x011e
+
+#define MANU_ANT		0x0053
+#define PROD_ANT_ETHERM			0x00d8
+#define PROD_ANT_ETHERB			0x00e4
+
+#define MANU_ALSYSTEMS		0x005b
+#define PROD_ALSYS_SCSIATAPI		0x0107
+
+#define MANU_MCS		0x0063
+#define PROD_MCS_CONNECT32		0x0125
+
+#define MANU_EESOX		0x0064
+#define PROD_EESOX_SCSI2		0x008c
+
+#define MANU_YELLOWSTONE	0x0096
+#define PROD_YELLOWSTONE_RAPIDE32	0x0120
+
+#ifdef ECARD_C
+#define CONST
+#else
+#define CONST const
+#endif
+
+#define MAX_ECARDS	9
+
+struct ecard_id {			/* Card ID structure		*/
+	unsigned short	manufacturer;
+	unsigned short	product;
+	void		*data;
+};
+
+struct in_ecid {			/* Packed card ID information	*/
+	unsigned short	product;	/* Product code			*/
+	unsigned short	manufacturer;	/* Manufacturer code		*/
+	unsigned char	id:4;		/* Simple ID			*/
+	unsigned char	cd:1;		/* Chunk dir present		*/
+	unsigned char	is:1;		/* Interrupt status pointers	*/
+	unsigned char	w:2;		/* Width			*/
+	unsigned char	country;	/* Country			*/
+	unsigned char	irqmask;	/* IRQ mask			*/
+	unsigned char	fiqmask;	/* FIQ mask			*/
+	unsigned long	irqoff;		/* IRQ offset			*/
+	unsigned long	fiqoff;		/* FIQ offset			*/
+};
+
+typedef struct expansion_card ecard_t;
+typedef unsigned long *loader_t;
+
+typedef struct expansion_card_ops {	/* Card handler routines	*/
+	void (*irqenable)(ecard_t *ec, int irqnr);
+	void (*irqdisable)(ecard_t *ec, int irqnr);
+	int  (*irqpending)(ecard_t *ec);
+	void (*fiqenable)(ecard_t *ec, int fiqnr);
+	void (*fiqdisable)(ecard_t *ec, int fiqnr);
+	int  (*fiqpending)(ecard_t *ec);
+} expansioncard_ops_t;
+
+#define ECARD_NUM_RESOURCES	(6)
+
+#define ECARD_RES_IOCSLOW	(0)
+#define ECARD_RES_IOCMEDIUM	(1)
+#define ECARD_RES_IOCFAST	(2)
+#define ECARD_RES_IOCSYNC	(3)
+#define ECARD_RES_MEMC		(4)
+#define ECARD_RES_EASI		(5)
+
+#define ecard_resource_start(ec,nr)	((ec)->resource[nr].start)
+#define ecard_resource_end(ec,nr)	((ec)->resource[nr].end)
+#define ecard_resource_len(ec,nr)	((ec)->resource[nr].end - \
+					 (ec)->resource[nr].start + 1)
+#define ecard_resource_flags(ec,nr)	((ec)->resource[nr].flags)
+
+/*
+ * This contains all the info needed on an expansion card
+ */
+struct expansion_card {
+	struct expansion_card  *next;
+
+	struct device		dev;
+	struct resource		resource[ECARD_NUM_RESOURCES];
+
+	/* Public data */
+	void __iomem		*irqaddr;	/* address of IRQ register	*/
+	void __iomem		*fiqaddr;	/* address of FIQ register	*/
+	unsigned char		irqmask;	/* IRQ mask			*/
+	unsigned char		fiqmask;	/* FIQ mask			*/
+	unsigned char  		claimed;	/* Card claimed?		*/
+	unsigned char		easi;		/* EASI card			*/
+
+	void			*irq_data;	/* Data for use for IRQ by card	*/
+	void			*fiq_data;	/* Data for use for FIQ by card	*/
+	const expansioncard_ops_t *ops;		/* Enable/Disable Ops for card	*/
+
+	CONST unsigned int	slot_no;	/* Slot number			*/
+	CONST unsigned int	dma;		/* DMA number (for request_dma)	*/
+	CONST unsigned int	irq;		/* IRQ number (for request_irq)	*/
+	CONST unsigned int	fiq;		/* FIQ number (for request_irq)	*/
+	CONST struct in_ecid	cid;		/* Card Identification		*/
+
+	/* Private internal data */
+	const char		*card_desc;	/* Card description		*/
+	CONST unsigned int	podaddr;	/* Base Linux address for card	*/
+	CONST loader_t		loader;		/* loader program */
+	u64			dma_mask;
+};
+
+void ecard_setirq(struct expansion_card *ec, const struct expansion_card_ops *ops, void *irq_data);
+
+struct in_chunk_dir {
+	unsigned int start_offset;
+	union {
+		unsigned char string[256];
+		unsigned char data[1];
+	} d;
+};
+
+/*
+ * Read a chunk from an expansion card
+ * cd : where to put read data
+ * ec : expansion card info struct
+ * id : id number to find
+ * num: (n+1)'th id to find.
+ */
+extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num);
+
+/*
+ * Request and release ecard resources
+ */
+extern int ecard_request_resources(struct expansion_card *ec);
+extern void ecard_release_resources(struct expansion_card *ec);
+
+void __iomem *ecardm_iomap(struct expansion_card *ec, unsigned int res,
+			   unsigned long offset, unsigned long maxsize);
+#define ecardm_iounmap(__ec, __addr)	devm_iounmap(&(__ec)->dev, __addr)
+
+extern struct bus_type ecard_bus_type;
+
+#define ECARD_DEV(_d)	container_of((_d), struct expansion_card, dev)
+
+struct ecard_driver {
+	int			(*probe)(struct expansion_card *, const struct ecard_id *id);
+	void			(*remove)(struct expansion_card *);
+	void			(*shutdown)(struct expansion_card *);
+	const struct ecard_id	*id_table;
+	unsigned int		id;
+	struct device_driver	drv;
+};
+
+#define ECARD_DRV(_d)	container_of((_d), struct ecard_driver, drv)
+
+#define ecard_set_drvdata(ec,data)	dev_set_drvdata(&(ec)->dev, (data))
+#define ecard_get_drvdata(ec)		dev_get_drvdata(&(ec)->dev)
+
+int ecard_register_driver(struct ecard_driver *);
+void ecard_remove_driver(struct ecard_driver *);
+
+#endif
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
new file mode 100644
index 000000000000..4ca751627489
--- /dev/null
+++ b/arch/arm/include/asm/elf.h
@@ -0,0 +1,116 @@
+#ifndef __ASMARM_ELF_H
+#define __ASMARM_ELF_H
+
+#include <asm/hwcap.h>
+
+#ifndef __ASSEMBLY__
+/*
+ * ELF register definitions..
+ */
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+typedef unsigned long elf_greg_t;
+typedef unsigned long elf_freg_t[3];
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fp elf_fpregset_t;
+#endif
+
+#define EM_ARM	40
+#define EF_ARM_APCS26 0x08
+#define EF_ARM_SOFT_FLOAT 0x200
+#define EF_ARM_EABI_MASK 0xFF000000
+
+#define R_ARM_NONE	0
+#define R_ARM_PC24	1
+#define R_ARM_ABS32	2
+#define R_ARM_CALL	28
+#define R_ARM_JUMP24	29
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#ifdef __ARMEB__
+#define ELF_DATA	ELFDATA2MSB
+#else
+#define ELF_DATA	ELFDATA2LSB
+#endif
+#define ELF_ARCH	EM_ARM
+
+#ifndef __ASSEMBLY__
+/*
+ * This yields a string that ld.so will use to load implementation
+ * specific libraries for optimization.  This is more specific in
+ * intent than poking at uname or /proc/cpuinfo.
+ *
+ * For now we just provide a fairly general string that describes the
+ * processor family.  This could be made more specific later if someone
+ * implemented optimisations that require it.  26-bit CPUs give you
+ * "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't
+ * supported).  32-bit CPUs give you "v3[lb]" for anything based on an
+ * ARM6 or ARM7 core and "armv4[lb]" for anything based on a StrongARM-1
+ * core.
+ */
+#define ELF_PLATFORM_SIZE 8
+#define ELF_PLATFORM	(elf_platform)
+
+extern char elf_platform[];
+#endif
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_ARM && ELF_PROC_OK(x))
+
+/*
+ * 32-bit code is always OK.  Some cpus can do 26-bit, some can't.
+ */
+#define ELF_PROC_OK(x)	(ELF_THUMB_OK(x) && ELF_26BIT_OK(x))
+
+#define ELF_THUMB_OK(x) \
+	((elf_hwcap & HWCAP_THUMB && ((x)->e_entry & 1) == 1) || \
+	 ((x)->e_entry & 3) == 0)
+
+#define ELF_26BIT_OK(x) \
+	((elf_hwcap & HWCAP_26BIT && (x)->e_flags & EF_ARM_APCS26) || \
+	  ((x)->e_flags & EF_ARM_APCS26) == 0)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE	(2 * TASK_SIZE / 3)
+
+/* When the program starts, a1 contains a pointer to a function to be 
+   registered with atexit, as per the SVR4 ABI.  A value of 0 means we 
+   have no such handler.  */
+#define ELF_PLAT_INIT(_r, load_addr)	(_r)->ARM_r0 = 0
+
+/*
+ * Since the FPA coprocessor uses CP1 and CP2, and iWMMXt uses CP0
+ * and CP1, we only enable access to the iWMMXt coprocessor if the
+ * binary is EABI or softfloat (and thus, guaranteed not to use
+ * FPA instructions.)
+ */
+#define SET_PERSONALITY(ex, ibcs2)					\
+	do {								\
+		if ((ex).e_flags & EF_ARM_APCS26) {			\
+			set_personality(PER_LINUX);			\
+		} else {						\
+			set_personality(PER_LINUX_32BIT);		\
+			if (elf_hwcap & HWCAP_IWMMXT && (ex).e_flags & (EF_ARM_EABI_MASK | EF_ARM_SOFT_FLOAT)) \
+				set_thread_flag(TIF_USING_IWMMXT);	\
+			else						\
+				clear_thread_flag(TIF_USING_IWMMXT);	\
+		}							\
+	} while (0)
+
+#endif
diff --git a/arch/arm/include/asm/emergency-restart.h b/arch/arm/include/asm/emergency-restart.h
new file mode 100644
index 000000000000..108d8c48e42e
--- /dev/null
+++ b/arch/arm/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/arm/include/asm/errno.h b/arch/arm/include/asm/errno.h
new file mode 100644
index 000000000000..6e60f0612bb6
--- /dev/null
+++ b/arch/arm/include/asm/errno.h
@@ -0,0 +1,6 @@
+#ifndef _ARM_ERRNO_H
+#define _ARM_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif
diff --git a/arch/arm/include/asm/fb.h b/arch/arm/include/asm/fb.h
new file mode 100644
index 000000000000..d92e99cd8c8a
--- /dev/null
+++ b/arch/arm/include/asm/fb.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/arm/include/asm/fcntl.h b/arch/arm/include/asm/fcntl.h
new file mode 100644
index 000000000000..a80b6607b2ef
--- /dev/null
+++ b/arch/arm/include/asm/fcntl.h
@@ -0,0 +1,11 @@
+#ifndef _ARM_FCNTL_H
+#define _ARM_FCNTL_H
+
+#define O_DIRECTORY	 040000	/* must be a directory */
+#define O_NOFOLLOW	0100000	/* don't follow links */
+#define O_DIRECT	0200000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE	0400000
+
+#include <asm-generic/fcntl.h>
+
+#endif
diff --git a/arch/arm/include/asm/fiq.h b/arch/arm/include/asm/fiq.h
new file mode 100644
index 000000000000..2242ce22ec6c
--- /dev/null
+++ b/arch/arm/include/asm/fiq.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/include/asm/fiq.h
+ *
+ * Support for FIQ on ARM architectures.
+ * Written by Philip Blundell <philb@gnu.org>, 1998
+ * Re-written by Russell King
+ */
+
+#ifndef __ASM_FIQ_H
+#define __ASM_FIQ_H
+
+#include <asm/ptrace.h>
+
+struct fiq_handler {
+	struct fiq_handler *next;
+	/* Name
+	 */
+	const char *name;
+	/* Called to ask driver to relinquish/
+	 * reacquire FIQ
+	 * return zero to accept, or -<errno>
+	 */
+	int (*fiq_op)(void *, int relinquish);
+	/* data for the relinquish/reacquire functions
+	 */
+	void *dev_id;
+};
+
+extern int claim_fiq(struct fiq_handler *f);
+extern void release_fiq(struct fiq_handler *f);
+extern void set_fiq_handler(void *start, unsigned int length);
+extern void set_fiq_regs(struct pt_regs *regs);
+extern void get_fiq_regs(struct pt_regs *regs);
+extern void enable_fiq(int fiq);
+extern void disable_fiq(int fiq);
+
+#endif
diff --git a/arch/arm/include/asm/flat.h b/arch/arm/include/asm/flat.h
new file mode 100644
index 000000000000..1d77e51907f6
--- /dev/null
+++ b/arch/arm/include/asm/flat.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/include/asm/flat.h -- uClinux flat-format executables
+ */
+
+#ifndef __ARM_FLAT_H__
+#define __ARM_FLAT_H__
+
+/* An odd number of words will be pushed after this alignment, so
+   deliberately misalign the value.  */
+#define	flat_stack_align(sp)	sp = (void *)(((unsigned long)(sp) - 4) | 4)
+#define	flat_argvp_envp_on_stack()		1
+#define	flat_old_ram_flag(flags)		(flags)
+#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
+#define	flat_get_addr_from_rp(rp, relval, flags, persistent) get_unaligned(rp)
+#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
+#define	flat_get_relocate_addr(rel)		(rel)
+#define	flat_set_persistent(relval, p)		0
+
+#endif /* __ARM_FLAT_H__ */
diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h
new file mode 100644
index 000000000000..c9f03eccc9d8
--- /dev/null
+++ b/arch/arm/include/asm/floppy.h
@@ -0,0 +1,148 @@
+/*
+ *  arch/arm/include/asm/floppy.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
+ */
+#ifndef __ASM_ARM_FLOPPY_H
+#define __ASM_ARM_FLOPPY_H
+#if 0
+#include <mach/floppy.h>
+#endif
+
+#define fd_outb(val,port)			\
+	do {					\
+		if ((port) == FD_DOR)		\
+			fd_setdor((val));	\
+		else				\
+			outb((val),(port));	\
+	} while(0)
+
+#define fd_inb(port)		inb((port))
+#define fd_request_irq()	request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
+					    IRQF_DISABLED,"floppy",NULL)
+#define fd_free_irq()		free_irq(IRQ_FLOPPYDISK,NULL)
+#define fd_disable_irq()	disable_irq(IRQ_FLOPPYDISK)
+#define fd_enable_irq()		enable_irq(IRQ_FLOPPYDISK)
+
+static inline int fd_dma_setup(void *data, unsigned int length,
+			       unsigned int mode, unsigned long addr)
+{
+	set_dma_mode(DMA_FLOPPY, mode);
+	__set_dma_addr(DMA_FLOPPY, data);
+	set_dma_count(DMA_FLOPPY, length);
+	virtual_dma_port = addr;
+	enable_dma(DMA_FLOPPY);
+	return 0;
+}
+#define fd_dma_setup		fd_dma_setup
+
+#define fd_request_dma()	request_dma(DMA_FLOPPY,"floppy")
+#define fd_free_dma()		free_dma(DMA_FLOPPY)
+#define fd_disable_dma()	disable_dma(DMA_FLOPPY)
+
+/* need to clean up dma.h */
+#define DMA_FLOPPYDISK		DMA_FLOPPY
+
+/* Floppy_selects is the list of DOR's to select drive fd
+ *
+ * On initialisation, the floppy list is scanned, and the drives allocated
+ * in the order that they are found.  This is done by seeking the drive
+ * to a non-zero track, and then restoring it to track 0.  If an error occurs,
+ * then there is no floppy drive present.       [to be put back in again]
+ */
+static unsigned char floppy_selects[2][4] =
+{
+	{ 0x10, 0x21, 0x23, 0x33 },
+	{ 0x10, 0x21, 0x23, 0x33 }
+};
+
+#define fd_setdor(dor)								\
+do {										\
+	int new_dor = (dor);							\
+	if (new_dor & 0xf0)							\
+		new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3];	\
+	else									\
+		new_dor &= 0x0c;						\
+	outb(new_dor, FD_DOR);							\
+} while (0)
+
+/*
+ * Someday, we'll automatically detect which drives are present...
+ */
+static inline void fd_scandrives (void)
+{
+#if 0
+	int floppy, drive_count;
+
+	fd_disable_irq();
+	raw_cmd = &default_raw_cmd;
+	raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK;
+	raw_cmd->track = 0;
+	raw_cmd->rate = ?;
+	drive_count = 0;
+	for (floppy = 0; floppy < 4; floppy ++) {
+		current_drive = drive_count;
+		/*
+		 * Turn on floppy motor
+		 */
+		if (start_motor(redo_fd_request))
+			continue;
+		/*
+		 * Set up FDC
+		 */
+		fdc_specify();
+		/*
+		 * Tell FDC to recalibrate
+		 */
+		output_byte(FD_RECALIBRATE);
+		LAST_OUT(UNIT(floppy));
+		/* wait for command to complete */
+		if (!successful) {
+			int i;
+			for (i = drive_count; i < 3; i--)
+				floppy_selects[fdc][i] = floppy_selects[fdc][i + 1];
+			floppy_selects[fdc][3] = 0;
+			floppy -= 1;
+		} else
+			drive_count++;
+	}
+#else
+	floppy_selects[0][0] = 0x10;
+	floppy_selects[0][1] = 0x21;
+	floppy_selects[0][2] = 0x23;
+	floppy_selects[0][3] = 0x33;
+#endif
+}
+
+#define FDC1 (0x3f0)
+
+#define FLOPPY0_TYPE 4
+#define FLOPPY1_TYPE 4
+
+#define N_FDC 1
+#define N_DRIVE 4
+
+#define CROSS_64KB(a,s) (0)
+
+/*
+ * This allows people to reverse the order of
+ * fd0 and fd1, in case their hardware is
+ * strangely connected (as some RiscPCs
+ * and A5000s seem to be).
+ */
+static void driveswap(int *ints, int dummy, int dummy2)
+{
+	floppy_selects[0][0] ^= floppy_selects[0][1];
+	floppy_selects[0][1] ^= floppy_selects[0][0];
+	floppy_selects[0][0] ^= floppy_selects[0][1];
+}
+
+#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
+	
+#endif
diff --git a/arch/arm/include/asm/fpstate.h b/arch/arm/include/asm/fpstate.h
new file mode 100644
index 000000000000..ee5e03efc1bb
--- /dev/null
+++ b/arch/arm/include/asm/fpstate.h
@@ -0,0 +1,93 @@
+/*
+ *  arch/arm/include/asm/fpstate.h
+ *
+ *  Copyright (C) 1995 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_FPSTATE_H
+#define __ASM_ARM_FPSTATE_H
+
+
+#ifndef __ASSEMBLY__
+
+/*
+ * VFP storage area has:
+ *  - FPEXC, FPSCR, FPINST and FPINST2.
+ *  - 16 or 32 double precision data registers
+ *  - an implementation-dependant word of state for FLDMX/FSTMX (pre-ARMv6)
+ * 
+ *  FPEXC will always be non-zero once the VFP has been used in this process.
+ */
+
+struct vfp_hard_struct {
+#ifdef CONFIG_VFPv3
+	__u64 fpregs[32];
+#else
+	__u64 fpregs[16];
+#endif
+#if __LINUX_ARM_ARCH__ < 6
+	__u32 fpmx_state;
+#endif
+	__u32 fpexc;
+	__u32 fpscr;
+	/*
+	 * VFP implementation specific state
+	 */
+	__u32 fpinst;
+	__u32 fpinst2;
+
+#ifdef CONFIG_SMP
+	__u32 cpu;
+#endif
+};
+
+union vfp_state {
+	struct vfp_hard_struct	hard;
+};
+
+extern void vfp_flush_thread(union vfp_state *);
+extern void vfp_release_thread(union vfp_state *);
+
+#define FP_HARD_SIZE 35
+
+struct fp_hard_struct {
+	unsigned int save[FP_HARD_SIZE];		/* as yet undefined */
+};
+
+#define FP_SOFT_SIZE 35
+
+struct fp_soft_struct {
+	unsigned int save[FP_SOFT_SIZE];		/* undefined information */
+};
+
+#define IWMMXT_SIZE	0x98
+
+struct iwmmxt_struct {
+	unsigned int save[IWMMXT_SIZE / sizeof(unsigned int)];
+};
+
+union fp_state {
+	struct fp_hard_struct	hard;
+	struct fp_soft_struct	soft;
+#ifdef CONFIG_IWMMXT
+	struct iwmmxt_struct	iwmmxt;
+#endif
+};
+
+#define FP_SIZE (sizeof(union fp_state) / sizeof(int))
+
+struct crunch_state {
+	unsigned int	mvdx[16][2];
+	unsigned int	mvax[4][3];
+	unsigned int	dspsc[2];
+};
+
+#define CRUNCH_SIZE	sizeof(struct crunch_state)
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
new file mode 100644
index 000000000000..584ef9a8e5a5
--- /dev/null
+++ b/arch/arm/include/asm/ftrace.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_ARM_FTRACE
+#define _ASM_ARM_FTRACE
+
+#ifdef CONFIG_FTRACE
+#define MCOUNT_ADDR		((long)(mcount))
+#define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void mcount(void);
+#endif
+
+#endif
+
+#endif /* _ASM_ARM_FTRACE */
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
new file mode 100644
index 000000000000..6a332a9f099c
--- /dev/null
+++ b/arch/arm/include/asm/futex.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif
diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h
new file mode 100644
index 000000000000..a0e39d5d00c9
--- /dev/null
+++ b/arch/arm/include/asm/glue.h
@@ -0,0 +1,149 @@
+/*
+ *  arch/arm/include/asm/glue.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *  Copyright (C) 2000-2002 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file provides the glue to stick the processor-specific bits
+ *  into the kernel in an efficient manner.  The idea is to use branches
+ *  when we're only targetting one class of TLB, or indirect calls
+ *  when we're targetting multiple classes of TLBs.
+ */
+#ifdef __KERNEL__
+
+
+#ifdef __STDC__
+#define ____glue(name,fn)	name##fn
+#else
+#define ____glue(name,fn)	name/**/fn
+#endif
+#define __glue(name,fn)		____glue(name,fn)
+
+
+
+/*
+ *	Data Abort Model
+ *	================
+ *
+ *	We have the following to choose from:
+ *	  arm6          - ARM6 style
+ *	  arm7		- ARM7 style
+ *	  v4_early	- ARMv4 without Thumb early abort handler
+ *	  v4t_late	- ARMv4 with Thumb late abort handler
+ *	  v4t_early	- ARMv4 with Thumb early abort handler
+ *	  v5tej_early	- ARMv5 with Thumb and Java early abort handler
+ *	  xscale	- ARMv5 with Thumb with Xscale extensions
+ *	  v6_early	- ARMv6 generic early abort handler
+ *	  v7_early	- ARMv7 generic early abort handler
+ */
+#undef CPU_DABORT_HANDLER
+#undef MULTI_DABORT
+
+#if defined(CONFIG_CPU_ARM610)
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER cpu_arm6_data_abort
+# endif
+#endif
+
+#if defined(CONFIG_CPU_ARM710)
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER cpu_arm7_data_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_LV4T
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v4t_late_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV4
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v4_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV4T
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v4t_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV5TJ
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v5tj_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV5T
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v5t_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV6
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v6_early_abort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_ABRT_EV7
+# ifdef CPU_DABORT_HANDLER
+#  define MULTI_DABORT 1
+# else
+#  define CPU_DABORT_HANDLER v7_early_abort
+# endif
+#endif
+
+#ifndef CPU_DABORT_HANDLER
+#error Unknown data abort handler type
+#endif
+
+/*
+ * Prefetch abort handler.  If the CPU has an IFAR use that, otherwise
+ * use the address of the aborted instruction
+ */
+#undef CPU_PABORT_HANDLER
+#undef MULTI_PABORT
+
+#ifdef CONFIG_CPU_PABRT_IFAR
+# ifdef CPU_PABORT_HANDLER
+#  define MULTI_PABORT 1
+# else
+#  define CPU_PABORT_HANDLER(reg, insn)	mrc p15, 0, reg, cr6, cr0, 2
+# endif
+#endif
+
+#ifdef CONFIG_CPU_PABRT_NOIFAR
+# ifdef CPU_PABORT_HANDLER
+#  define MULTI_PABORT 1
+# else
+#  define CPU_PABORT_HANDLER(reg, insn)	mov reg, insn
+# endif
+#endif
+
+#ifndef CPU_PABORT_HANDLER
+#error Unknown prefetch abort handler type
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
new file mode 100644
index 000000000000..166a7a3e2840
--- /dev/null
+++ b/arch/arm/include/asm/gpio.h
@@ -0,0 +1,7 @@
+#ifndef _ARCH_ARM_GPIO_H
+#define _ARCH_ARM_GPIO_H
+
+/* not all ARM platforms necessarily support this API ... */
+#include <mach/gpio.h>
+
+#endif /* _ARCH_ARM_GPIO_H */
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
new file mode 100644
index 000000000000..182310b99195
--- /dev/null
+++ b/arch/arm/include/asm/hardirq.h
@@ -0,0 +1,32 @@
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <asm/irq.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+	unsigned int local_timer_irqs;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#if NR_IRQS > 256
+#define HARDIRQ_BITS	9
+#else
+#define HARDIRQ_BITS	8
+#endif
+
+/*
+ * The hardirq mask has to be large enough to have space
+ * for potentially all IRQ sources in the system nesting
+ * on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#define __ARCH_IRQ_EXIT_IRQS_DISABLED	1
+
+#endif /* __ASM_HARDIRQ_H */
diff --git a/arch/arm/include/asm/hardware/arm_timer.h b/arch/arm/include/asm/hardware/arm_timer.h
new file mode 100644
index 000000000000..04be3bdf46b8
--- /dev/null
+++ b/arch/arm/include/asm/hardware/arm_timer.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_ARM_HARDWARE_ARM_TIMER_H
+#define __ASM_ARM_HARDWARE_ARM_TIMER_H
+
+#define TIMER_LOAD	0x00
+#define TIMER_VALUE	0x04
+#define TIMER_CTRL	0x08
+#define TIMER_CTRL_ONESHOT	(1 << 0)
+#define TIMER_CTRL_32BIT	(1 << 1)
+#define TIMER_CTRL_DIV1		(0 << 2)
+#define TIMER_CTRL_DIV16	(1 << 2)
+#define TIMER_CTRL_DIV256	(2 << 2)
+#define TIMER_CTRL_IE		(1 << 5)	/* Interrupt Enable (versatile only) */
+#define TIMER_CTRL_PERIODIC	(1 << 6)
+#define TIMER_CTRL_ENABLE	(1 << 7)
+
+#define TIMER_INTCLR	0x0c
+#define TIMER_RIS	0x10
+#define TIMER_MIS	0x14
+#define TIMER_BGLOAD	0x18
+
+#endif
diff --git a/arch/arm/include/asm/hardware/arm_twd.h b/arch/arm/include/asm/hardware/arm_twd.h
new file mode 100644
index 000000000000..e521b70713c8
--- /dev/null
+++ b/arch/arm/include/asm/hardware/arm_twd.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_HARDWARE_TWD_H
+#define __ASM_HARDWARE_TWD_H
+
+#define TWD_TIMER_LOAD 			0x00
+#define TWD_TIMER_COUNTER		0x04
+#define TWD_TIMER_CONTROL		0x08
+#define TWD_TIMER_INTSTAT		0x0C
+
+#define TWD_WDOG_LOAD			0x20
+#define TWD_WDOG_COUNTER		0x24
+#define TWD_WDOG_CONTROL		0x28
+#define TWD_WDOG_INTSTAT		0x2C
+#define TWD_WDOG_RESETSTAT		0x30
+#define TWD_WDOG_DISABLE		0x34
+
+#define TWD_TIMER_CONTROL_ENABLE	(1 << 0)
+#define TWD_TIMER_CONTROL_ONESHOT	(0 << 1)
+#define TWD_TIMER_CONTROL_PERIODIC	(1 << 1)
+#define TWD_TIMER_CONTROL_IT_ENABLE	(1 << 2)
+
+#endif
diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h
new file mode 100644
index 000000000000..64f2252a25cd
--- /dev/null
+++ b/arch/arm/include/asm/hardware/cache-l2x0.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/include/asm/hardware/cache-l2x0.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_HARDWARE_L2X0_H
+#define __ASM_ARM_HARDWARE_L2X0_H
+
+#define L2X0_CACHE_ID			0x000
+#define L2X0_CACHE_TYPE			0x004
+#define L2X0_CTRL			0x100
+#define L2X0_AUX_CTRL			0x104
+#define L2X0_EVENT_CNT_CTRL		0x200
+#define L2X0_EVENT_CNT1_CFG		0x204
+#define L2X0_EVENT_CNT0_CFG		0x208
+#define L2X0_EVENT_CNT1_VAL		0x20C
+#define L2X0_EVENT_CNT0_VAL		0x210
+#define L2X0_INTR_MASK			0x214
+#define L2X0_MASKED_INTR_STAT		0x218
+#define L2X0_RAW_INTR_STAT		0x21C
+#define L2X0_INTR_CLEAR			0x220
+#define L2X0_CACHE_SYNC			0x730
+#define L2X0_INV_LINE_PA		0x770
+#define L2X0_INV_WAY			0x77C
+#define L2X0_CLEAN_LINE_PA		0x7B0
+#define L2X0_CLEAN_LINE_IDX		0x7B8
+#define L2X0_CLEAN_WAY			0x7BC
+#define L2X0_CLEAN_INV_LINE_PA		0x7F0
+#define L2X0_CLEAN_INV_LINE_IDX		0x7F8
+#define L2X0_CLEAN_INV_WAY		0x7FC
+#define L2X0_LOCKDOWN_WAY_D		0x900
+#define L2X0_LOCKDOWN_WAY_I		0x904
+#define L2X0_TEST_OPERATION		0xF00
+#define L2X0_LINE_DATA			0xF10
+#define L2X0_LINE_TAG			0xF30
+#define L2X0_DEBUG_CTRL			0xF40
+
+#ifndef __ASSEMBLY__
+extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/hardware/clps7111.h b/arch/arm/include/asm/hardware/clps7111.h
new file mode 100644
index 000000000000..44477225aed6
--- /dev/null
+++ b/arch/arm/include/asm/hardware/clps7111.h
@@ -0,0 +1,184 @@
+/*
+ *  arch/arm/include/asm/hardware/clps7111.h
+ *
+ *  This file contains the hardware definitions of the CLPS7111 internal
+ *  registers.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_HARDWARE_CLPS7111_H
+#define __ASM_HARDWARE_CLPS7111_H
+
+#define CLPS7111_PHYS_BASE	(0x80000000)
+
+#ifndef __ASSEMBLY__
+#define clps_readb(off)		__raw_readb(CLPS7111_BASE + (off))
+#define clps_readw(off)		__raw_readw(CLPS7111_BASE + (off))
+#define clps_readl(off)		__raw_readl(CLPS7111_BASE + (off))
+#define clps_writeb(val,off)	__raw_writeb(val, CLPS7111_BASE + (off))
+#define clps_writew(val,off)	__raw_writew(val, CLPS7111_BASE + (off))
+#define clps_writel(val,off)	__raw_writel(val, CLPS7111_BASE + (off))
+#endif
+
+#define PADR		(0x0000)
+#define PBDR		(0x0001)
+#define PDDR		(0x0003)
+#define PADDR		(0x0040)
+#define PBDDR		(0x0041)
+#define PDDDR		(0x0043)
+#define PEDR		(0x0080)
+#define PEDDR		(0x00c0)
+#define SYSCON1		(0x0100)
+#define SYSFLG1		(0x0140)
+#define MEMCFG1		(0x0180)
+#define MEMCFG2		(0x01c0)
+#define DRFPR		(0x0200)
+#define INTSR1		(0x0240)
+#define INTMR1		(0x0280)
+#define LCDCON		(0x02c0)
+#define TC1D            (0x0300)
+#define TC2D		(0x0340)
+#define RTCDR		(0x0380)
+#define RTCMR		(0x03c0)
+#define PMPCON		(0x0400)
+#define CODR		(0x0440)
+#define UARTDR1		(0x0480)
+#define UBRLCR1		(0x04c0)
+#define SYNCIO		(0x0500)
+#define PALLSW		(0x0540)
+#define PALMSW		(0x0580)
+#define STFCLR		(0x05c0)
+#define BLEOI		(0x0600)
+#define MCEOI		(0x0640)
+#define TEOI		(0x0680)
+#define TC1EOI		(0x06c0)
+#define TC2EOI		(0x0700)
+#define RTCEOI		(0x0740)
+#define UMSEOI		(0x0780)
+#define COEOI		(0x07c0)
+#define HALT		(0x0800)
+#define STDBY		(0x0840)
+
+#define FBADDR		(0x1000)
+#define SYSCON2		(0x1100)
+#define SYSFLG2		(0x1140)
+#define INTSR2		(0x1240)
+#define INTMR2		(0x1280)
+#define UARTDR2		(0x1480)
+#define UBRLCR2		(0x14c0)
+#define SS2DR		(0x1500)
+#define SRXEOF		(0x1600)
+#define SS2POP		(0x16c0)
+#define KBDEOI		(0x1700)
+
+/* common bits: SYSCON1 / SYSCON2 */
+#define SYSCON_UARTEN		(1 << 8)
+
+#define SYSCON1_KBDSCAN(x)	((x) & 15)
+#define SYSCON1_KBDSCANMASK	(15)
+#define SYSCON1_TC1M		(1 << 4)
+#define SYSCON1_TC1S		(1 << 5)
+#define SYSCON1_TC2M		(1 << 6)
+#define SYSCON1_TC2S		(1 << 7)
+#define SYSCON1_UART1EN		SYSCON_UARTEN
+#define SYSCON1_BZTOG		(1 << 9)
+#define SYSCON1_BZMOD		(1 << 10)
+#define SYSCON1_DBGEN		(1 << 11)
+#define SYSCON1_LCDEN		(1 << 12)
+#define SYSCON1_CDENTX		(1 << 13)
+#define SYSCON1_CDENRX		(1 << 14)
+#define SYSCON1_SIREN		(1 << 15)
+#define SYSCON1_ADCKSEL(x)	(((x) & 3) << 16)
+#define SYSCON1_ADCKSEL_MASK	(3 << 16)
+#define SYSCON1_EXCKEN		(1 << 18)
+#define SYSCON1_WAKEDIS		(1 << 19)
+#define SYSCON1_IRTXM		(1 << 20)
+
+/* common bits: SYSFLG1 / SYSFLG2 */
+#define SYSFLG_UBUSY		(1 << 11)
+#define SYSFLG_URXFE		(1 << 22)
+#define SYSFLG_UTXFF		(1 << 23)
+
+#define SYSFLG1_MCDR		(1 << 0)
+#define SYSFLG1_DCDET		(1 << 1)
+#define SYSFLG1_WUDR		(1 << 2)
+#define SYSFLG1_WUON		(1 << 3)
+#define SYSFLG1_CTS		(1 << 8)
+#define SYSFLG1_DSR		(1 << 9)
+#define SYSFLG1_DCD		(1 << 10)
+#define SYSFLG1_UBUSY		SYSFLG_UBUSY
+#define SYSFLG1_NBFLG		(1 << 12)
+#define SYSFLG1_RSTFLG		(1 << 13)
+#define SYSFLG1_PFFLG		(1 << 14)
+#define SYSFLG1_CLDFLG		(1 << 15)
+#define SYSFLG1_URXFE		SYSFLG_URXFE
+#define SYSFLG1_UTXFF		SYSFLG_UTXFF
+#define SYSFLG1_CRXFE		(1 << 24)
+#define SYSFLG1_CTXFF		(1 << 25)
+#define SYSFLG1_SSIBUSY		(1 << 26)
+#define SYSFLG1_ID		(1 << 29)
+
+#define SYSFLG2_SSRXOF		(1 << 0)
+#define SYSFLG2_RESVAL		(1 << 1)
+#define SYSFLG2_RESFRM		(1 << 2)
+#define SYSFLG2_SS2RXFE		(1 << 3)
+#define SYSFLG2_SS2TXFF		(1 << 4)
+#define SYSFLG2_SS2TXUF		(1 << 5)
+#define SYSFLG2_CKMODE		(1 << 6)
+#define SYSFLG2_UBUSY		SYSFLG_UBUSY
+#define SYSFLG2_URXFE		SYSFLG_URXFE
+#define SYSFLG2_UTXFF		SYSFLG_UTXFF
+
+#define LCDCON_GSEN		(1 << 30)
+#define LCDCON_GSMD		(1 << 31)
+
+#define SYSCON2_SERSEL		(1 << 0)
+#define SYSCON2_KBD6		(1 << 1)
+#define SYSCON2_DRAMZ		(1 << 2)
+#define SYSCON2_KBWEN		(1 << 3)
+#define SYSCON2_SS2TXEN		(1 << 4)
+#define SYSCON2_PCCARD1		(1 << 5)
+#define SYSCON2_PCCARD2		(1 << 6)
+#define SYSCON2_SS2RXEN		(1 << 7)
+#define SYSCON2_UART2EN		SYSCON_UARTEN
+#define SYSCON2_SS2MAEN		(1 << 9)
+#define SYSCON2_OSTB		(1 << 12)
+#define SYSCON2_CLKENSL		(1 << 13)
+#define SYSCON2_BUZFREQ		(1 << 14)
+
+/* common bits: UARTDR1 / UARTDR2 */
+#define UARTDR_FRMERR		(1 << 8)
+#define UARTDR_PARERR		(1 << 9)
+#define UARTDR_OVERR		(1 << 10)
+
+/* common bits: UBRLCR1 / UBRLCR2 */
+#define UBRLCR_BAUD_MASK	((1 << 12) - 1)
+#define UBRLCR_BREAK		(1 << 12)
+#define UBRLCR_PRTEN		(1 << 13)
+#define UBRLCR_EVENPRT		(1 << 14)
+#define UBRLCR_XSTOP		(1 << 15)
+#define UBRLCR_FIFOEN		(1 << 16)
+#define UBRLCR_WRDLEN5		(0 << 17)
+#define UBRLCR_WRDLEN6		(1 << 17)
+#define UBRLCR_WRDLEN7		(2 << 17)
+#define UBRLCR_WRDLEN8		(3 << 17)
+#define UBRLCR_WRDLEN_MASK	(3 << 17)
+
+#define SYNCIO_SMCKEN		(1 << 13)
+#define SYNCIO_TXFRMEN		(1 << 14)
+
+#endif /* __ASM_HARDWARE_CLPS7111_H */
diff --git a/arch/arm/include/asm/hardware/cs89712.h b/arch/arm/include/asm/hardware/cs89712.h
new file mode 100644
index 000000000000..f75626933e94
--- /dev/null
+++ b/arch/arm/include/asm/hardware/cs89712.h
@@ -0,0 +1,49 @@
+/*
+ *  arch/arm/include/asm/hardware/cs89712.h
+ *
+ *  This file contains the hardware definitions of the CS89712
+ *  additional internal registers.
+ *
+ *  Copyright (C) 2001 Thomas Gleixner autronix automation <gleixner@autronix.de>
+ *			
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_HARDWARE_CS89712_H
+#define __ASM_HARDWARE_CS89712_H
+
+/*
+*	CS89712 additional registers
+*/
+                                  
+#define PCDR			0x0002	/* Port C Data register ---------------------------- */
+#define PCDDR			0x0042	/* Port C Data Direction register ------------------ */
+#define SDCONF			0x2300  /* SDRAM Configuration register ---------------------*/
+#define SDRFPR			0x2340  /* SDRAM Refresh period register --------------------*/
+
+#define SDCONF_ACTIVE		(1 << 10)
+#define SDCONF_CLKCTL		(1 << 9)
+#define SDCONF_WIDTH_4		(0 << 7)
+#define SDCONF_WIDTH_8		(1 << 7)
+#define SDCONF_WIDTH_16		(2 << 7)
+#define SDCONF_WIDTH_32		(3 << 7)
+#define SDCONF_SIZE_16		(0 << 5)
+#define SDCONF_SIZE_64		(1 << 5)
+#define SDCONF_SIZE_128		(2 << 5)
+#define SDCONF_SIZE_256		(3 << 5)
+#define SDCONF_CASLAT_2		(2)
+#define SDCONF_CASLAT_3		(3)
+
+#endif /* __ASM_HARDWARE_CS89712_H */
diff --git a/arch/arm/include/asm/hardware/debug-8250.S b/arch/arm/include/asm/hardware/debug-8250.S
new file mode 100644
index 000000000000..22c689255e6e
--- /dev/null
+++ b/arch/arm/include/asm/hardware/debug-8250.S
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/include/asm/hardware/debug-8250.S
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/serial_reg.h>
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #UART_TX << UART_SHIFT]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldrb	\rd, [\rx, #UART_LSR << UART_SHIFT]
+		and	\rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+		teq	\rd, #UART_LSR_TEMT | UART_LSR_THRE
+		bne	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+#ifdef FLOW_CONTROL
+1001:		ldrb	\rd, [\rx, #UART_MSR << UART_SHIFT]
+		tst	\rd, #UART_MSR_CTS
+		beq	1001b
+#endif
+		.endm
diff --git a/arch/arm/include/asm/hardware/debug-pl01x.S b/arch/arm/include/asm/hardware/debug-pl01x.S
new file mode 100644
index 000000000000..f9fd083eff63
--- /dev/null
+++ b/arch/arm/include/asm/hardware/debug-pl01x.S
@@ -0,0 +1,29 @@
+/* arch/arm/include/asm/hardware/debug-pl01x.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+#include <linux/amba/serial.h>
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx, #UART01x_DR]
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #UART01x_FR]
+		tst	\rd, #UART01x_FR_TXFF
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #UART01x_FR]
+		tst	\rd, #UART01x_FR_BUSY
+		bne	1001b
+		.endm
diff --git a/arch/arm/include/asm/hardware/dec21285.h b/arch/arm/include/asm/hardware/dec21285.h
new file mode 100644
index 000000000000..0d7552751aaf
--- /dev/null
+++ b/arch/arm/include/asm/hardware/dec21285.h
@@ -0,0 +1,147 @@
+/*
+ *  arch/arm/include/asm/hardware/dec21285.h
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  DC21285 registers
+ */
+#define DC21285_PCI_IACK		0x79000000
+#define DC21285_ARMCSR_BASE		0x42000000
+#define DC21285_PCI_TYPE_0_CONFIG	0x7b000000
+#define DC21285_PCI_TYPE_1_CONFIG	0x7a000000
+#define DC21285_OUTBOUND_WRITE_FLUSH	0x78000000
+#define DC21285_FLASH			0x41000000
+#define DC21285_PCI_IO			0x7c000000
+#define DC21285_PCI_MEM			0x80000000
+
+#ifndef __ASSEMBLY__
+#include <mach/hardware.h>
+#define DC21285_IO(x)		((volatile unsigned long *)(ARMCSR_BASE+(x)))
+#else
+#define DC21285_IO(x)		(x)
+#endif
+
+#define CSR_PCICMD		DC21285_IO(0x0004)
+#define CSR_CLASSREV		DC21285_IO(0x0008)
+#define CSR_PCICACHELINESIZE	DC21285_IO(0x000c)
+#define CSR_PCICSRBASE		DC21285_IO(0x0010)
+#define CSR_PCICSRIOBASE	DC21285_IO(0x0014)
+#define CSR_PCISDRAMBASE	DC21285_IO(0x0018)
+#define CSR_PCIROMBASE		DC21285_IO(0x0030)
+#define CSR_MBOX0		DC21285_IO(0x0050)
+#define CSR_MBOX1		DC21285_IO(0x0054)
+#define CSR_MBOX2		DC21285_IO(0x0058)
+#define CSR_MBOX3		DC21285_IO(0x005c)
+#define CSR_DOORBELL		DC21285_IO(0x0060)
+#define CSR_DOORBELL_SETUP	DC21285_IO(0x0064)
+#define CSR_ROMWRITEREG		DC21285_IO(0x0068)
+#define CSR_CSRBASEMASK		DC21285_IO(0x00f8)
+#define CSR_CSRBASEOFFSET	DC21285_IO(0x00fc)
+#define CSR_SDRAMBASEMASK	DC21285_IO(0x0100)
+#define CSR_SDRAMBASEOFFSET	DC21285_IO(0x0104)
+#define CSR_ROMBASEMASK		DC21285_IO(0x0108)
+#define CSR_SDRAMTIMING		DC21285_IO(0x010c)
+#define CSR_SDRAMADDRSIZE0	DC21285_IO(0x0110)
+#define CSR_SDRAMADDRSIZE1	DC21285_IO(0x0114)
+#define CSR_SDRAMADDRSIZE2	DC21285_IO(0x0118)
+#define CSR_SDRAMADDRSIZE3	DC21285_IO(0x011c)
+#define CSR_I2O_INFREEHEAD	DC21285_IO(0x0120)
+#define CSR_I2O_INPOSTTAIL	DC21285_IO(0x0124)
+#define CSR_I2O_OUTPOSTHEAD	DC21285_IO(0x0128)
+#define CSR_I2O_OUTFREETAIL	DC21285_IO(0x012c)
+#define CSR_I2O_INFREECOUNT	DC21285_IO(0x0130)
+#define CSR_I2O_OUTPOSTCOUNT	DC21285_IO(0x0134)
+#define CSR_I2O_INPOSTCOUNT	DC21285_IO(0x0138)
+#define CSR_SA110_CNTL		DC21285_IO(0x013c)
+#define SA110_CNTL_INITCMPLETE		(1 << 0)
+#define SA110_CNTL_ASSERTSERR		(1 << 1)
+#define SA110_CNTL_RXSERR		(1 << 3)
+#define SA110_CNTL_SA110DRAMPARITY	(1 << 4)
+#define SA110_CNTL_PCISDRAMPARITY	(1 << 5)
+#define SA110_CNTL_DMASDRAMPARITY	(1 << 6)
+#define SA110_CNTL_DISCARDTIMER		(1 << 8)
+#define SA110_CNTL_PCINRESET		(1 << 9)
+#define SA110_CNTL_I2O_256		(0 << 10)
+#define SA110_CNTL_I20_512		(1 << 10)
+#define SA110_CNTL_I2O_1024		(2 << 10)
+#define SA110_CNTL_I2O_2048		(3 << 10)
+#define SA110_CNTL_I2O_4096		(4 << 10)
+#define SA110_CNTL_I2O_8192		(5 << 10)
+#define SA110_CNTL_I2O_16384		(6 << 10)
+#define SA110_CNTL_I2O_32768		(7 << 10)
+#define SA110_CNTL_WATCHDOG		(1 << 13)
+#define SA110_CNTL_ROMWIDTH_UNDEF	(0 << 14)
+#define SA110_CNTL_ROMWIDTH_16		(1 << 14)
+#define SA110_CNTL_ROMWIDTH_32		(2 << 14)
+#define SA110_CNTL_ROMWIDTH_8		(3 << 14)
+#define SA110_CNTL_ROMACCESSTIME(x)	((x)<<16)
+#define SA110_CNTL_ROMBURSTTIME(x)	((x)<<20)
+#define SA110_CNTL_ROMTRISTATETIME(x)	((x)<<24)
+#define SA110_CNTL_XCSDIR(x)		((x)<<28)
+#define SA110_CNTL_PCICFN		(1 << 31)
+
+/*
+ * footbridge_cfn_mode() is used when we want
+ * to check whether we are the central function
+ */
+#define __footbridge_cfn_mode() (*CSR_SA110_CNTL & SA110_CNTL_PCICFN)
+#if defined(CONFIG_FOOTBRIDGE_HOST) && defined(CONFIG_FOOTBRIDGE_ADDIN)
+#define footbridge_cfn_mode() __footbridge_cfn_mode()
+#elif defined(CONFIG_FOOTBRIDGE_HOST)
+#define footbridge_cfn_mode() (1)
+#else
+#define footbridge_cfn_mode() (0)
+#endif
+
+#define CSR_PCIADDR_EXTN	DC21285_IO(0x0140)
+#define CSR_PREFETCHMEMRANGE	DC21285_IO(0x0144)
+#define CSR_XBUS_CYCLE		DC21285_IO(0x0148)
+#define CSR_XBUS_IOSTROBE	DC21285_IO(0x014c)
+#define CSR_DOORBELL_PCI	DC21285_IO(0x0150)
+#define CSR_DOORBELL_SA110	DC21285_IO(0x0154)
+#define CSR_UARTDR		DC21285_IO(0x0160)
+#define CSR_RXSTAT		DC21285_IO(0x0164)
+#define CSR_H_UBRLCR		DC21285_IO(0x0168)
+#define CSR_M_UBRLCR		DC21285_IO(0x016c)
+#define CSR_L_UBRLCR		DC21285_IO(0x0170)
+#define CSR_UARTCON		DC21285_IO(0x0174)
+#define CSR_UARTFLG		DC21285_IO(0x0178)
+#define CSR_IRQ_STATUS		DC21285_IO(0x0180)
+#define CSR_IRQ_RAWSTATUS	DC21285_IO(0x0184)
+#define CSR_IRQ_ENABLE		DC21285_IO(0x0188)
+#define CSR_IRQ_DISABLE		DC21285_IO(0x018c)
+#define CSR_IRQ_SOFT		DC21285_IO(0x0190)
+#define CSR_FIQ_STATUS		DC21285_IO(0x0280)
+#define CSR_FIQ_RAWSTATUS	DC21285_IO(0x0284)
+#define CSR_FIQ_ENABLE		DC21285_IO(0x0288)
+#define CSR_FIQ_DISABLE		DC21285_IO(0x028c)
+#define CSR_FIQ_SOFT		DC21285_IO(0x0290)
+#define CSR_TIMER1_LOAD		DC21285_IO(0x0300)
+#define CSR_TIMER1_VALUE	DC21285_IO(0x0304)
+#define CSR_TIMER1_CNTL		DC21285_IO(0x0308)
+#define CSR_TIMER1_CLR		DC21285_IO(0x030c)
+#define CSR_TIMER2_LOAD		DC21285_IO(0x0320)
+#define CSR_TIMER2_VALUE	DC21285_IO(0x0324)
+#define CSR_TIMER2_CNTL		DC21285_IO(0x0328)
+#define CSR_TIMER2_CLR		DC21285_IO(0x032c)
+#define CSR_TIMER3_LOAD		DC21285_IO(0x0340)
+#define CSR_TIMER3_VALUE	DC21285_IO(0x0344)
+#define CSR_TIMER3_CNTL		DC21285_IO(0x0348)
+#define CSR_TIMER3_CLR		DC21285_IO(0x034c)
+#define CSR_TIMER4_LOAD		DC21285_IO(0x0360)
+#define CSR_TIMER4_VALUE	DC21285_IO(0x0364)
+#define CSR_TIMER4_CNTL		DC21285_IO(0x0368)
+#define CSR_TIMER4_CLR		DC21285_IO(0x036c)
+
+#define TIMER_CNTL_ENABLE	(1 << 7)
+#define TIMER_CNTL_AUTORELOAD	(1 << 6)
+#define TIMER_CNTL_DIV1		(0)
+#define TIMER_CNTL_DIV16	(1 << 2)
+#define TIMER_CNTL_DIV256	(2 << 2)
+#define TIMER_CNTL_CNTEXT	(3 << 2)
+
+
diff --git a/arch/arm/include/asm/hardware/entry-macro-iomd.S b/arch/arm/include/asm/hardware/entry-macro-iomd.S
new file mode 100644
index 000000000000..e0af4983723f
--- /dev/null
+++ b/arch/arm/include/asm/hardware/entry-macro-iomd.S
@@ -0,0 +1,139 @@
+/*
+ * arch/arm/include/asm/hardware/entry-macro-iomd.S
+ *
+ * Low-level IRQ helper macros for IOC/IOMD based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/* IOC / IOMD based hardware */
+#include <asm/hardware/iomd.h>
+
+		.macro	disable_fiq
+		mov	r12, #ioc_base_high
+		.if	ioc_base_low
+		orr	r12, r12, #ioc_base_low
+		.endif
+		strb	r12, [r12, #0x38]	@ Disable FIQ register
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldrb	\irqstat, [\base, #IOMD_IRQREQB]	@ get high priority first
+		ldr	\tmp, =irq_prio_h
+		teq	\irqstat, #0
+#ifdef IOMD_BASE
+		ldreqb	\irqstat, [\base, #IOMD_DMAREQ]	@ get dma
+		addeq	\tmp, \tmp, #256		@ irq_prio_h table size
+		teqeq	\irqstat, #0
+		bne	2406f
+#endif
+		ldreqb	\irqstat, [\base, #IOMD_IRQREQA]	@ get low priority
+		addeq	\tmp, \tmp, #256		@ irq_prio_d table size
+		teqeq	\irqstat, #0
+#ifdef IOMD_IRQREQC
+		ldreqb	\irqstat, [\base, #IOMD_IRQREQC]
+		addeq	\tmp, \tmp, #256		@ irq_prio_l table size
+		teqeq	\irqstat, #0
+#endif
+#ifdef IOMD_IRQREQD
+		ldreqb	\irqstat, [\base, #IOMD_IRQREQD]
+		addeq	\tmp, \tmp, #256		@ irq_prio_lc table size
+		teqeq	\irqstat, #0
+#endif
+2406:		ldrneb	\irqnr, [\tmp, \irqstat]	@ get IRQ number
+		.endm
+
+/*
+ * Interrupt table (incorporates priority).  Please note that we
+ * rely on the order of these tables (see above code).
+ */
+		.align	5
+irq_prio_h:	.byte	 0, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	12, 8, 9, 8,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	14,14,14,14,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	15,15,15,15,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+		.byte	13,13,13,13,10,10,10,10,11,11,11,11,10,10,10,10
+#ifdef IOMD_BASE
+irq_prio_d:	.byte	 0,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	20,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	23,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	22,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+		.byte	21,16,17,16,18,16,17,16,19,16,17,16,18,16,17,16
+#endif
+irq_prio_l:	.byte	 0, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
+		.byte	 4, 0, 1, 0, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3
+		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
+		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
+		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
+		.byte	 6, 6, 6, 6, 6, 6, 6, 6, 3, 3, 3, 3, 3, 3, 3, 3
+		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
+		.byte	 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+		.byte	 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7
+#ifdef IOMD_IRQREQC
+irq_prio_lc:	.byte	24,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
+		.byte	28,24,25,24,26,26,26,26,27,27,27,27,27,27,27,27
+		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
+		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
+		.byte	30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
+		.byte	30,30,30,30,30,30,30,30,27,27,27,27,27,27,27,27
+		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
+		.byte	29,29,29,29,29,29,29,29,29,29,29,29,29,29,29,29
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+		.byte	31,31,31,31,31,31,31,31,31,31,31,31,31,31,31,31
+#endif
+#ifdef IOMD_IRQREQD
+irq_prio_ld:	.byte	40,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
+		.byte	44,40,41,40,42,42,42,42,43,43,43,43,43,43,43,43
+		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
+		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
+		.byte	46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
+		.byte	46,46,46,46,46,46,46,46,43,43,43,43,43,43,43,43
+		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
+		.byte	45,45,45,45,45,45,45,45,45,45,45,45,45,45,45,45
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+		.byte	47,47,47,47,47,47,47,47,47,47,47,47,47,47,47,47
+#endif
+
diff --git a/arch/arm/include/asm/hardware/ep7211.h b/arch/arm/include/asm/hardware/ep7211.h
new file mode 100644
index 000000000000..654d5f625c49
--- /dev/null
+++ b/arch/arm/include/asm/hardware/ep7211.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/include/asm/hardware/ep7211.h
+ *
+ *  This file contains the hardware definitions of the EP7211 internal
+ *  registers.
+ *
+ *  Copyright (C) 2001 Blue Mug, Inc.  All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_HARDWARE_EP7211_H
+#define __ASM_HARDWARE_EP7211_H
+
+#include <asm/hardware/clps7111.h>
+
+/*
+ * define EP7211_BASE to be the base address of the region
+ * you want to access.
+ */
+
+#define EP7211_PHYS_BASE	(0x80000000)
+
+/*
+ * XXX miket@bluemug.com: need to introduce EP7211 registers (those not
+ * present in 7212) here.
+ */
+
+#endif /* __ASM_HARDWARE_EP7211_H */
diff --git a/arch/arm/include/asm/hardware/ep7212.h b/arch/arm/include/asm/hardware/ep7212.h
new file mode 100644
index 000000000000..3b43bbeaf1db
--- /dev/null
+++ b/arch/arm/include/asm/hardware/ep7212.h
@@ -0,0 +1,83 @@
+/*
+ *  arch/arm/include/asm/hardware/ep7212.h
+ *
+ *  This file contains the hardware definitions of the EP7212 internal
+ *  registers.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_HARDWARE_EP7212_H
+#define __ASM_HARDWARE_EP7212_H
+
+/*
+ * define EP7212_BASE to be the base address of the region
+ * you want to access.
+ */
+
+#define EP7212_PHYS_BASE	(0x80000000)
+
+#ifndef __ASSEMBLY__
+#define ep_readl(off)		__raw_readl(EP7212_BASE + (off))
+#define ep_writel(val,off)	__raw_writel(val, EP7212_BASE + (off))
+#endif
+
+/*
+ * These registers are specific to the EP7212 only
+ */
+#define DAIR			0x2000
+#define DAIR0			0x2040
+#define DAIDR1			0x2080
+#define DAIDR2			0x20c0
+#define DAISR			0x2100
+#define SYSCON3			0x2200
+#define INTSR3			0x2240
+#define INTMR3			0x2280
+#define LEDFLSH			0x22c0
+
+#define DAIR_DAIEN		(1 << 16)
+#define DAIR_ECS		(1 << 17)
+#define DAIR_LCTM		(1 << 19)
+#define DAIR_LCRM		(1 << 20)
+#define DAIR_RCTM		(1 << 21)
+#define DAIR_RCRM		(1 << 22)
+#define DAIR_LBM		(1 << 23)
+
+#define DAIDR2_FIFOEN		(1 << 15)
+#define DAIDR2_FIFOLEFT		(0x0d << 16)
+#define DAIDR2_FIFORIGHT	(0x11 << 16)
+
+#define DAISR_RCTS		(1 << 0)
+#define DAISR_RCRS		(1 << 1)
+#define DAISR_LCTS		(1 << 2)
+#define DAISR_LCRS		(1 << 3)
+#define DAISR_RCTU		(1 << 4)
+#define DAISR_RCRO		(1 << 5)
+#define DAISR_LCTU		(1 << 6)
+#define DAISR_LCRO		(1 << 7)
+#define DAISR_RCNF		(1 << 8)
+#define DAISR_RCNE		(1 << 9)
+#define DAISR_LCNF		(1 << 10)
+#define DAISR_LCNE		(1 << 11)
+#define DAISR_FIFO		(1 << 12)
+
+#define SYSCON3_ADCCON		(1 << 0)
+#define SYSCON3_DAISEL		(1 << 3)
+#define SYSCON3_ADCCKNSEN	(1 << 4)
+#define SYSCON3_FASTWAKE	(1 << 8)
+#define SYSCON3_DAIEN		(1 << 9)
+
+#endif /* __ASM_HARDWARE_EP7212_H */
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
new file mode 100644
index 000000000000..4924914af188
--- /dev/null
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -0,0 +1,42 @@
+/*
+ *  arch/arm/include/asm/hardware/gic.h
+ *
+ *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_HARDWARE_GIC_H
+#define __ASM_ARM_HARDWARE_GIC_H
+
+#include <linux/compiler.h>
+
+#define GIC_CPU_CTRL			0x00
+#define GIC_CPU_PRIMASK			0x04
+#define GIC_CPU_BINPOINT		0x08
+#define GIC_CPU_INTACK			0x0c
+#define GIC_CPU_EOI			0x10
+#define GIC_CPU_RUNNINGPRI		0x14
+#define GIC_CPU_HIGHPRI			0x18
+
+#define GIC_DIST_CTRL			0x000
+#define GIC_DIST_CTR			0x004
+#define GIC_DIST_ENABLE_SET		0x100
+#define GIC_DIST_ENABLE_CLEAR		0x180
+#define GIC_DIST_PENDING_SET		0x200
+#define GIC_DIST_PENDING_CLEAR		0x280
+#define GIC_DIST_ACTIVE_BIT		0x300
+#define GIC_DIST_PRI			0x400
+#define GIC_DIST_TARGET			0x800
+#define GIC_DIST_CONFIG			0xc00
+#define GIC_DIST_SOFTINT		0xf00
+
+#ifndef __ASSEMBLY__
+void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
+void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
+void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
+void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/hardware/icst307.h b/arch/arm/include/asm/hardware/icst307.h
new file mode 100644
index 000000000000..554f128a1046
--- /dev/null
+++ b/arch/arm/include/asm/hardware/icst307.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/include/asm/hardware/icst307.h
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Support functions for calculating clocks/divisors for the ICS307
+ *  clock generators.  See http://www.icst.com/ for more information
+ *  on these devices.
+ *
+ *  This file is similar to the icst525.h file
+ */
+#ifndef ASMARM_HARDWARE_ICST307_H
+#define ASMARM_HARDWARE_ICST307_H
+
+struct icst307_params {
+	unsigned long	ref;
+	unsigned long	vco_max;	/* inclusive */
+	unsigned short	vd_min;		/* inclusive */
+	unsigned short	vd_max;		/* inclusive */
+	unsigned char	rd_min;		/* inclusive */
+	unsigned char	rd_max;		/* inclusive */
+};
+
+struct icst307_vco {
+	unsigned short	v;
+	unsigned char	r;
+	unsigned char	s;
+};
+
+unsigned long icst307_khz(const struct icst307_params *p, struct icst307_vco vco);
+struct icst307_vco icst307_khz_to_vco(const struct icst307_params *p, unsigned long freq);
+struct icst307_vco icst307_ps_to_vco(const struct icst307_params *p, unsigned long period);
+
+#endif
diff --git a/arch/arm/include/asm/hardware/icst525.h b/arch/arm/include/asm/hardware/icst525.h
new file mode 100644
index 000000000000..58f0dc43e2ed
--- /dev/null
+++ b/arch/arm/include/asm/hardware/icst525.h
@@ -0,0 +1,36 @@
+/*
+ *  arch/arm/include/asm/hardware/icst525.h
+ *
+ *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Support functions for calculating clocks/divisors for the ICST525
+ *  clock generators.  See http://www.icst.com/ for more information
+ *  on these devices.
+ */
+#ifndef ASMARM_HARDWARE_ICST525_H
+#define ASMARM_HARDWARE_ICST525_H
+
+struct icst525_params {
+	unsigned long	ref;
+	unsigned long	vco_max;	/* inclusive */
+	unsigned short	vd_min;		/* inclusive */
+	unsigned short	vd_max;		/* inclusive */
+	unsigned char	rd_min;		/* inclusive */
+	unsigned char	rd_max;		/* inclusive */
+};
+
+struct icst525_vco {
+	unsigned short	v;
+	unsigned char	r;
+	unsigned char	s;
+};
+
+unsigned long icst525_khz(const struct icst525_params *p, struct icst525_vco vco);
+struct icst525_vco icst525_khz_to_vco(const struct icst525_params *p, unsigned long freq);
+struct icst525_vco icst525_ps_to_vco(const struct icst525_params *p, unsigned long period);
+
+#endif
diff --git a/arch/arm/include/asm/hardware/ioc.h b/arch/arm/include/asm/hardware/ioc.h
new file mode 100644
index 000000000000..1f6b8013becb
--- /dev/null
+++ b/arch/arm/include/asm/hardware/ioc.h
@@ -0,0 +1,72 @@
+/*
+ *  arch/arm/include/asm/hardware/ioc.h
+ *
+ *  Copyright (C) Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Use these macros to read/write the IOC.  All it does is perform the actual
+ *  read/write.
+ */
+#ifndef __ASMARM_HARDWARE_IOC_H
+#define __ASMARM_HARDWARE_IOC_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * We use __raw_base variants here so that we give the compiler the
+ * chance to keep IOC_BASE in a register.
+ */
+#define ioc_readb(off)		__raw_readb(IOC_BASE + (off))
+#define ioc_writeb(val,off)	__raw_writeb(val, IOC_BASE + (off))
+
+#endif
+
+#define IOC_CONTROL	(0x00)
+#define IOC_KARTTX	(0x04)
+#define IOC_KARTRX	(0x04)
+
+#define IOC_IRQSTATA	(0x10)
+#define IOC_IRQREQA	(0x14)
+#define IOC_IRQCLRA	(0x14)
+#define IOC_IRQMASKA	(0x18)
+
+#define IOC_IRQSTATB	(0x20)
+#define IOC_IRQREQB	(0x24)
+#define IOC_IRQMASKB	(0x28)
+
+#define IOC_FIQSTAT	(0x30)
+#define IOC_FIQREQ	(0x34)
+#define IOC_FIQMASK	(0x38)
+
+#define IOC_T0CNTL	(0x40)
+#define IOC_T0LTCHL	(0x40)
+#define IOC_T0CNTH	(0x44)
+#define IOC_T0LTCHH	(0x44)
+#define IOC_T0GO	(0x48)
+#define IOC_T0LATCH	(0x4c)
+
+#define IOC_T1CNTL	(0x50)
+#define IOC_T1LTCHL	(0x50)
+#define IOC_T1CNTH	(0x54)
+#define IOC_T1LTCHH	(0x54)
+#define IOC_T1GO	(0x58)
+#define IOC_T1LATCH	(0x5c)
+
+#define IOC_T2CNTL	(0x60)
+#define IOC_T2LTCHL	(0x60)
+#define IOC_T2CNTH	(0x64)
+#define IOC_T2LTCHH	(0x64)
+#define IOC_T2GO	(0x68)
+#define IOC_T2LATCH	(0x6c)
+
+#define IOC_T3CNTL	(0x70)
+#define IOC_T3LTCHL	(0x70)
+#define IOC_T3CNTH	(0x74)
+#define IOC_T3LTCHH	(0x74)
+#define IOC_T3GO	(0x78)
+#define IOC_T3LATCH	(0x7c)
+
+#endif
diff --git a/arch/arm/include/asm/hardware/iomd.h b/arch/arm/include/asm/hardware/iomd.h
new file mode 100644
index 000000000000..9c5afbd71a69
--- /dev/null
+++ b/arch/arm/include/asm/hardware/iomd.h
@@ -0,0 +1,226 @@
+/*
+ *  arch/arm/include/asm/hardware/iomd.h
+ *
+ *  Copyright (C) 1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains information out the IOMD ASIC used in the
+ *  Acorn RiscPC and subsequently integrated into the CLPS7500 chips.
+ */
+#ifndef __ASMARM_HARDWARE_IOMD_H
+#define __ASMARM_HARDWARE_IOMD_H
+
+
+#ifndef __ASSEMBLY__
+
+/*
+ * We use __raw_base variants here so that we give the compiler the
+ * chance to keep IOC_BASE in a register.
+ */
+#define iomd_readb(off)		__raw_readb(IOMD_BASE + (off))
+#define iomd_readl(off)		__raw_readl(IOMD_BASE + (off))
+#define iomd_writeb(val,off)	__raw_writeb(val, IOMD_BASE + (off))
+#define iomd_writel(val,off)	__raw_writel(val, IOMD_BASE + (off))
+
+#endif
+
+#define IOMD_CONTROL	(0x000)
+#define IOMD_KARTTX	(0x004)
+#define IOMD_KARTRX	(0x004)
+#define IOMD_KCTRL	(0x008)
+
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_IOLINES	(0x00C)
+#endif
+
+#define IOMD_IRQSTATA	(0x010)
+#define IOMD_IRQREQA	(0x014)
+#define IOMD_IRQCLRA	(0x014)
+#define IOMD_IRQMASKA	(0x018)
+
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_SUSMODE	(0x01C)
+#endif
+
+#define IOMD_IRQSTATB	(0x020)
+#define IOMD_IRQREQB	(0x024)
+#define IOMD_IRQMASKB	(0x028)
+
+#define IOMD_FIQSTAT	(0x030)
+#define IOMD_FIQREQ	(0x034)
+#define IOMD_FIQMASK	(0x038)
+
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_CLKCTL	(0x03C)
+#endif
+
+#define IOMD_T0CNTL	(0x040)
+#define IOMD_T0LTCHL	(0x040)
+#define IOMD_T0CNTH	(0x044)
+#define IOMD_T0LTCHH	(0x044)
+#define IOMD_T0GO	(0x048)
+#define IOMD_T0LATCH	(0x04c)
+
+#define IOMD_T1CNTL	(0x050)
+#define IOMD_T1LTCHL	(0x050)
+#define IOMD_T1CNTH	(0x054)
+#define IOMD_T1LTCHH	(0x054)
+#define IOMD_T1GO	(0x058)
+#define IOMD_T1LATCH	(0x05c)
+
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_IRQSTATC	(0x060)
+#define IOMD_IRQREQC	(0x064)
+#define IOMD_IRQMASKC	(0x068)
+
+#define IOMD_VIDMUX	(0x06c)
+
+#define IOMD_IRQSTATD	(0x070)
+#define IOMD_IRQREQD	(0x074)
+#define IOMD_IRQMASKD	(0x078)
+#endif
+
+#define IOMD_ROMCR0	(0x080)
+#define IOMD_ROMCR1	(0x084)
+#ifdef CONFIG_ARCH_RPC
+#define IOMD_DRAMCR	(0x088)
+#endif
+#define IOMD_REFCR	(0x08C)
+
+#define IOMD_FSIZE	(0x090)
+#define IOMD_ID0	(0x094)
+#define IOMD_ID1	(0x098)
+#define IOMD_VERSION	(0x09C)
+
+#ifdef CONFIG_ARCH_RPC
+#define IOMD_MOUSEX	(0x0A0)
+#define IOMD_MOUSEY	(0x0A4)
+#endif
+
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_MSEDAT	(0x0A8)
+#define IOMD_MSECTL	(0x0Ac)
+#endif
+
+#ifdef CONFIG_ARCH_RPC
+#define IOMD_DMATCR	(0x0C0)
+#endif
+#define IOMD_IOTCR	(0x0C4)
+#define IOMD_ECTCR	(0x0C8)
+#ifdef CONFIG_ARCH_RPC
+#define IOMD_DMAEXT	(0x0CC)
+#endif
+#ifdef CONFIG_ARCH_CLPS7500
+#define IOMD_ASTCR	(0x0CC)
+#define IOMD_DRAMCR	(0x0D0)
+#define IOMD_SELFREF	(0x0D4)
+#define IOMD_ATODICR	(0x0E0)
+#define IOMD_ATODSR	(0x0E4)
+#define IOMD_ATODCC	(0x0E8)
+#define IOMD_ATODCNT1	(0x0EC)
+#define IOMD_ATODCNT2	(0x0F0)
+#define IOMD_ATODCNT3	(0x0F4)
+#define IOMD_ATODCNT4	(0x0F8)
+#endif
+
+#ifdef CONFIG_ARCH_RPC
+#define DMA_EXT_IO0	1
+#define DMA_EXT_IO1	2
+#define DMA_EXT_IO2	4
+#define DMA_EXT_IO3	8
+
+#define IOMD_IO0CURA	(0x100)
+#define IOMD_IO0ENDA	(0x104)
+#define IOMD_IO0CURB	(0x108)
+#define IOMD_IO0ENDB	(0x10C)
+#define IOMD_IO0CR	(0x110)
+#define IOMD_IO0ST	(0x114)
+
+#define IOMD_IO1CURA	(0x120)
+#define IOMD_IO1ENDA	(0x124)
+#define IOMD_IO1CURB	(0x128)
+#define IOMD_IO1ENDB	(0x12C)
+#define IOMD_IO1CR	(0x130)
+#define IOMD_IO1ST	(0x134)
+
+#define IOMD_IO2CURA	(0x140)
+#define IOMD_IO2ENDA	(0x144)
+#define IOMD_IO2CURB	(0x148)
+#define IOMD_IO2ENDB	(0x14C)
+#define IOMD_IO2CR	(0x150)
+#define IOMD_IO2ST	(0x154)
+
+#define IOMD_IO3CURA	(0x160)
+#define IOMD_IO3ENDA	(0x164)
+#define IOMD_IO3CURB	(0x168)
+#define IOMD_IO3ENDB	(0x16C)
+#define IOMD_IO3CR	(0x170)
+#define IOMD_IO3ST	(0x174)
+#endif
+
+#define IOMD_SD0CURA	(0x180)
+#define IOMD_SD0ENDA	(0x184)
+#define IOMD_SD0CURB	(0x188)
+#define IOMD_SD0ENDB	(0x18C)
+#define IOMD_SD0CR	(0x190)
+#define IOMD_SD0ST	(0x194)
+
+#ifdef CONFIG_ARCH_RPC
+#define IOMD_SD1CURA	(0x1A0)
+#define IOMD_SD1ENDA	(0x1A4)
+#define IOMD_SD1CURB	(0x1A8)
+#define IOMD_SD1ENDB	(0x1AC)
+#define IOMD_SD1CR	(0x1B0)
+#define IOMD_SD1ST	(0x1B4)
+#endif
+
+#define IOMD_CURSCUR	(0x1C0)
+#define IOMD_CURSINIT	(0x1C4)
+
+#define IOMD_VIDCUR	(0x1D0)
+#define IOMD_VIDEND	(0x1D4)
+#define IOMD_VIDSTART	(0x1D8)
+#define IOMD_VIDINIT	(0x1DC)
+#define IOMD_VIDCR	(0x1E0)
+
+#define IOMD_DMASTAT	(0x1F0)
+#define IOMD_DMAREQ	(0x1F4)
+#define IOMD_DMAMASK	(0x1F8)
+
+#define DMA_END_S	(1 << 31)
+#define DMA_END_L	(1 << 30)
+
+#define DMA_CR_C	0x80
+#define DMA_CR_D	0x40
+#define DMA_CR_E	0x20
+
+#define DMA_ST_OFL	4
+#define DMA_ST_INT	2
+#define DMA_ST_AB	1
+
+/*
+ * DMA (MEMC) compatibility
+ */
+#define HALF_SAM	vram_half_sam
+#define VDMA_ALIGNMENT	(HALF_SAM * 2)
+#define VDMA_XFERSIZE	(HALF_SAM)
+#define VDMA_INIT	IOMD_VIDINIT
+#define VDMA_START	IOMD_VIDSTART
+#define VDMA_END	IOMD_VIDEND
+
+#ifndef __ASSEMBLY__
+extern unsigned int vram_half_sam;
+#define video_set_dma(start,end,offset)				\
+do {								\
+	outl (SCREEN_START + start, VDMA_START);		\
+	outl (SCREEN_START + end - VDMA_XFERSIZE, VDMA_END);	\
+	if (offset >= end - VDMA_XFERSIZE)			\
+		offset |= 0x40000000;				\
+	outl (SCREEN_START + offset, VDMA_INIT);		\
+} while (0)
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/hardware/iop3xx-adma.h b/arch/arm/include/asm/hardware/iop3xx-adma.h
new file mode 100644
index 000000000000..87bff09633aa
--- /dev/null
+++ b/arch/arm/include/asm/hardware/iop3xx-adma.h
@@ -0,0 +1,888 @@
+/*
+ * Copyright © 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#ifndef _ADMA_H
+#define _ADMA_H
+#include <linux/types.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/hardware/iop_adma.h>
+
+/* Memory copy units */
+#define DMA_CCR(chan)		(chan->mmr_base + 0x0)
+#define DMA_CSR(chan)		(chan->mmr_base + 0x4)
+#define DMA_DAR(chan)		(chan->mmr_base + 0xc)
+#define DMA_NDAR(chan)		(chan->mmr_base + 0x10)
+#define DMA_PADR(chan)		(chan->mmr_base + 0x14)
+#define DMA_PUADR(chan)	(chan->mmr_base + 0x18)
+#define DMA_LADR(chan)		(chan->mmr_base + 0x1c)
+#define DMA_BCR(chan)		(chan->mmr_base + 0x20)
+#define DMA_DCR(chan)		(chan->mmr_base + 0x24)
+
+/* Application accelerator unit  */
+#define AAU_ACR(chan)		(chan->mmr_base + 0x0)
+#define AAU_ASR(chan)		(chan->mmr_base + 0x4)
+#define AAU_ADAR(chan)		(chan->mmr_base + 0x8)
+#define AAU_ANDAR(chan)	(chan->mmr_base + 0xc)
+#define AAU_SAR(src, chan)	(chan->mmr_base + (0x10 + ((src) << 2)))
+#define AAU_DAR(chan)		(chan->mmr_base + 0x20)
+#define AAU_ABCR(chan)		(chan->mmr_base + 0x24)
+#define AAU_ADCR(chan)		(chan->mmr_base + 0x28)
+#define AAU_SAR_EDCR(src_edc)	(chan->mmr_base + (0x02c + ((src_edc-4) << 2)))
+#define AAU_EDCR0_IDX	8
+#define AAU_EDCR1_IDX	17
+#define AAU_EDCR2_IDX	26
+
+#define DMA0_ID 0
+#define DMA1_ID 1
+#define AAU_ID 2
+
+struct iop3xx_aau_desc_ctrl {
+	unsigned int int_en:1;
+	unsigned int blk1_cmd_ctrl:3;
+	unsigned int blk2_cmd_ctrl:3;
+	unsigned int blk3_cmd_ctrl:3;
+	unsigned int blk4_cmd_ctrl:3;
+	unsigned int blk5_cmd_ctrl:3;
+	unsigned int blk6_cmd_ctrl:3;
+	unsigned int blk7_cmd_ctrl:3;
+	unsigned int blk8_cmd_ctrl:3;
+	unsigned int blk_ctrl:2;
+	unsigned int dual_xor_en:1;
+	unsigned int tx_complete:1;
+	unsigned int zero_result_err:1;
+	unsigned int zero_result_en:1;
+	unsigned int dest_write_en:1;
+};
+
+struct iop3xx_aau_e_desc_ctrl {
+	unsigned int reserved:1;
+	unsigned int blk1_cmd_ctrl:3;
+	unsigned int blk2_cmd_ctrl:3;
+	unsigned int blk3_cmd_ctrl:3;
+	unsigned int blk4_cmd_ctrl:3;
+	unsigned int blk5_cmd_ctrl:3;
+	unsigned int blk6_cmd_ctrl:3;
+	unsigned int blk7_cmd_ctrl:3;
+	unsigned int blk8_cmd_ctrl:3;
+	unsigned int reserved2:7;
+};
+
+struct iop3xx_dma_desc_ctrl {
+	unsigned int pci_transaction:4;
+	unsigned int int_en:1;
+	unsigned int dac_cycle_en:1;
+	unsigned int mem_to_mem_en:1;
+	unsigned int crc_data_tx_en:1;
+	unsigned int crc_gen_en:1;
+	unsigned int crc_seed_dis:1;
+	unsigned int reserved:21;
+	unsigned int crc_tx_complete:1;
+};
+
+struct iop3xx_desc_dma {
+	u32 next_desc;
+	union {
+		u32 pci_src_addr;
+		u32 pci_dest_addr;
+		u32 src_addr;
+	};
+	union {
+		u32 upper_pci_src_addr;
+		u32 upper_pci_dest_addr;
+	};
+	union {
+		u32 local_pci_src_addr;
+		u32 local_pci_dest_addr;
+		u32 dest_addr;
+	};
+	u32 byte_count;
+	union {
+		u32 desc_ctrl;
+		struct iop3xx_dma_desc_ctrl desc_ctrl_field;
+	};
+	u32 crc_addr;
+};
+
+struct iop3xx_desc_aau {
+	u32 next_desc;
+	u32 src[4];
+	u32 dest_addr;
+	u32 byte_count;
+	union {
+		u32 desc_ctrl;
+		struct iop3xx_aau_desc_ctrl desc_ctrl_field;
+	};
+	union {
+		u32 src_addr;
+		u32 e_desc_ctrl;
+		struct iop3xx_aau_e_desc_ctrl e_desc_ctrl_field;
+	} src_edc[31];
+};
+
+struct iop3xx_aau_gfmr {
+	unsigned int gfmr1:8;
+	unsigned int gfmr2:8;
+	unsigned int gfmr3:8;
+	unsigned int gfmr4:8;
+};
+
+struct iop3xx_desc_pq_xor {
+	u32 next_desc;
+	u32 src[3];
+	union {
+		u32 data_mult1;
+		struct iop3xx_aau_gfmr data_mult1_field;
+	};
+	u32 dest_addr;
+	u32 byte_count;
+	union {
+		u32 desc_ctrl;
+		struct iop3xx_aau_desc_ctrl desc_ctrl_field;
+	};
+	union {
+		u32 src_addr;
+		u32 e_desc_ctrl;
+		struct iop3xx_aau_e_desc_ctrl e_desc_ctrl_field;
+		u32 data_multiplier;
+		struct iop3xx_aau_gfmr data_mult_field;
+		u32 reserved;
+	} src_edc_gfmr[19];
+};
+
+struct iop3xx_desc_dual_xor {
+	u32 next_desc;
+	u32 src0_addr;
+	u32 src1_addr;
+	u32 h_src_addr;
+	u32 d_src_addr;
+	u32 h_dest_addr;
+	u32 byte_count;
+	union {
+		u32 desc_ctrl;
+		struct iop3xx_aau_desc_ctrl desc_ctrl_field;
+	};
+	u32 d_dest_addr;
+};
+
+union iop3xx_desc {
+	struct iop3xx_desc_aau *aau;
+	struct iop3xx_desc_dma *dma;
+	struct iop3xx_desc_pq_xor *pq_xor;
+	struct iop3xx_desc_dual_xor *dual_xor;
+	void *ptr;
+};
+
+static inline int iop_adma_get_max_xor(void)
+{
+	return 32;
+}
+
+static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
+{
+	int id = chan->device->id;
+
+	switch (id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		return __raw_readl(DMA_DAR(chan));
+	case AAU_ID:
+		return __raw_readl(AAU_ADAR(chan));
+	default:
+		BUG();
+	}
+	return 0;
+}
+
+static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan,
+						u32 next_desc_addr)
+{
+	int id = chan->device->id;
+
+	switch (id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		__raw_writel(next_desc_addr, DMA_NDAR(chan));
+		break;
+	case AAU_ID:
+		__raw_writel(next_desc_addr, AAU_ANDAR(chan));
+		break;
+	}
+
+}
+
+#define IOP_ADMA_STATUS_BUSY (1 << 10)
+#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT (1024)
+#define IOP_ADMA_XOR_MAX_BYTE_COUNT (16 * 1024 * 1024)
+#define IOP_ADMA_MAX_BYTE_COUNT (16 * 1024 * 1024)
+
+static inline int iop_chan_is_busy(struct iop_adma_chan *chan)
+{
+	u32 status = __raw_readl(DMA_CSR(chan));
+	return (status & IOP_ADMA_STATUS_BUSY) ? 1 : 0;
+}
+
+static inline int iop_desc_is_aligned(struct iop_adma_desc_slot *desc,
+					int num_slots)
+{
+	/* num_slots will only ever be 1, 2, 4, or 8 */
+	return (desc->idx & (num_slots - 1)) ? 0 : 1;
+}
+
+/* to do: support large (i.e. > hw max) buffer sizes */
+static inline int iop_chan_memcpy_slot_count(size_t len, int *slots_per_op)
+{
+	*slots_per_op = 1;
+	return 1;
+}
+
+/* to do: support large (i.e. > hw max) buffer sizes */
+static inline int iop_chan_memset_slot_count(size_t len, int *slots_per_op)
+{
+	*slots_per_op = 1;
+	return 1;
+}
+
+static inline int iop3xx_aau_xor_slot_count(size_t len, int src_cnt,
+					int *slots_per_op)
+{
+	static const char slot_count_table[] = {
+						1, 1, 1, 1, /* 01 - 04 */
+						2, 2, 2, 2, /* 05 - 08 */
+						4, 4, 4, 4, /* 09 - 12 */
+						4, 4, 4, 4, /* 13 - 16 */
+						8, 8, 8, 8, /* 17 - 20 */
+						8, 8, 8, 8, /* 21 - 24 */
+						8, 8, 8, 8, /* 25 - 28 */
+						8, 8, 8, 8, /* 29 - 32 */
+					      };
+	*slots_per_op = slot_count_table[src_cnt - 1];
+	return *slots_per_op;
+}
+
+static inline int
+iop_chan_interrupt_slot_count(int *slots_per_op, struct iop_adma_chan *chan)
+{
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		return iop_chan_memcpy_slot_count(0, slots_per_op);
+	case AAU_ID:
+		return iop3xx_aau_xor_slot_count(0, 2, slots_per_op);
+	default:
+		BUG();
+	}
+	return 0;
+}
+
+static inline int iop_chan_xor_slot_count(size_t len, int src_cnt,
+						int *slots_per_op)
+{
+	int slot_cnt = iop3xx_aau_xor_slot_count(len, src_cnt, slots_per_op);
+
+	if (len <= IOP_ADMA_XOR_MAX_BYTE_COUNT)
+		return slot_cnt;
+
+	len -= IOP_ADMA_XOR_MAX_BYTE_COUNT;
+	while (len > IOP_ADMA_XOR_MAX_BYTE_COUNT) {
+		len -= IOP_ADMA_XOR_MAX_BYTE_COUNT;
+		slot_cnt += *slots_per_op;
+	}
+
+	if (len)
+		slot_cnt += *slots_per_op;
+
+	return slot_cnt;
+}
+
+/* zero sum on iop3xx is limited to 1k at a time so it requires multiple
+ * descriptors
+ */
+static inline int iop_chan_zero_sum_slot_count(size_t len, int src_cnt,
+						int *slots_per_op)
+{
+	int slot_cnt = iop3xx_aau_xor_slot_count(len, src_cnt, slots_per_op);
+
+	if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT)
+		return slot_cnt;
+
+	len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
+	while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
+		len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
+		slot_cnt += *slots_per_op;
+	}
+
+	if (len)
+		slot_cnt += *slots_per_op;
+
+	return slot_cnt;
+}
+
+static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan)
+{
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		return hw_desc.dma->dest_addr;
+	case AAU_ID:
+		return hw_desc.aau->dest_addr;
+	default:
+		BUG();
+	}
+	return 0;
+}
+
+static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan)
+{
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		return hw_desc.dma->byte_count;
+	case AAU_ID:
+		return hw_desc.aau->byte_count;
+	default:
+		BUG();
+	}
+	return 0;
+}
+
+/* translate the src_idx to a descriptor word index */
+static inline int __desc_idx(int src_idx)
+{
+	static const int desc_idx_table[] = { 0, 0, 0, 0,
+					      0, 1, 2, 3,
+					      5, 6, 7, 8,
+					      9, 10, 11, 12,
+					      14, 15, 16, 17,
+					      18, 19, 20, 21,
+					      23, 24, 25, 26,
+					      27, 28, 29, 30,
+					    };
+
+	return desc_idx_table[src_idx];
+}
+
+static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan,
+					int src_idx)
+{
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		return hw_desc.dma->src_addr;
+	case AAU_ID:
+		break;
+	default:
+		BUG();
+	}
+
+	if (src_idx < 4)
+		return hw_desc.aau->src[src_idx];
+	else
+		return hw_desc.aau->src_edc[__desc_idx(src_idx)].src_addr;
+}
+
+static inline void iop3xx_aau_desc_set_src_addr(struct iop3xx_desc_aau *hw_desc,
+					int src_idx, dma_addr_t addr)
+{
+	if (src_idx < 4)
+		hw_desc->src[src_idx] = addr;
+	else
+		hw_desc->src_edc[__desc_idx(src_idx)].src_addr = addr;
+}
+
+static inline void
+iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags)
+{
+	struct iop3xx_desc_dma *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop3xx_dma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.mem_to_mem_en = 1;
+	u_desc_ctrl.field.pci_transaction = 0xe; /* memory read block */
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+	hw_desc->upper_pci_src_addr = 0;
+	hw_desc->crc_addr = 0;
+}
+
+static inline void
+iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags)
+{
+	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop3xx_aau_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.blk1_cmd_ctrl = 0x2; /* memory block fill */
+	u_desc_ctrl.field.dest_write_en = 1;
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+}
+
+static inline u32
+iop3xx_desc_init_xor(struct iop3xx_desc_aau *hw_desc, int src_cnt,
+		     unsigned long flags)
+{
+	int i, shift;
+	u32 edcr;
+	union {
+		u32 value;
+		struct iop3xx_aau_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	switch (src_cnt) {
+	case 25 ... 32:
+		u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
+		edcr = 0;
+		shift = 1;
+		for (i = 24; i < src_cnt; i++) {
+			edcr |= (1 << shift);
+			shift += 3;
+		}
+		hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = edcr;
+		src_cnt = 24;
+		/* fall through */
+	case 17 ... 24:
+		if (!u_desc_ctrl.field.blk_ctrl) {
+			hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0;
+			u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
+		}
+		edcr = 0;
+		shift = 1;
+		for (i = 16; i < src_cnt; i++) {
+			edcr |= (1 << shift);
+			shift += 3;
+		}
+		hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = edcr;
+		src_cnt = 16;
+		/* fall through */
+	case 9 ... 16:
+		if (!u_desc_ctrl.field.blk_ctrl)
+			u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */
+		edcr = 0;
+		shift = 1;
+		for (i = 8; i < src_cnt; i++) {
+			edcr |= (1 << shift);
+			shift += 3;
+		}
+		hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = edcr;
+		src_cnt = 8;
+		/* fall through */
+	case 2 ... 8:
+		shift = 1;
+		for (i = 0; i < src_cnt; i++) {
+			u_desc_ctrl.value |= (1 << shift);
+			shift += 3;
+		}
+
+		if (!u_desc_ctrl.field.blk_ctrl && src_cnt > 4)
+			u_desc_ctrl.field.blk_ctrl = 0x1; /* use mini-desc */
+	}
+
+	u_desc_ctrl.field.dest_write_en = 1;
+	u_desc_ctrl.field.blk1_cmd_ctrl = 0x7; /* direct fill */
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+
+	return u_desc_ctrl.value;
+}
+
+static inline void
+iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt,
+		  unsigned long flags)
+{
+	iop3xx_desc_init_xor(desc->hw_desc, src_cnt, flags);
+}
+
+/* return the number of operations */
+static inline int
+iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
+		       unsigned long flags)
+{
+	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
+	struct iop3xx_desc_aau *hw_desc, *prev_hw_desc, *iter;
+	union {
+		u32 value;
+		struct iop3xx_aau_desc_ctrl field;
+	} u_desc_ctrl;
+	int i, j;
+
+	hw_desc = desc->hw_desc;
+
+	for (i = 0, j = 0; (slot_cnt -= slots_per_op) >= 0;
+		i += slots_per_op, j++) {
+		iter = iop_hw_desc_slot_idx(hw_desc, i);
+		u_desc_ctrl.value = iop3xx_desc_init_xor(iter, src_cnt, flags);
+		u_desc_ctrl.field.dest_write_en = 0;
+		u_desc_ctrl.field.zero_result_en = 1;
+		u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+		iter->desc_ctrl = u_desc_ctrl.value;
+
+		/* for the subsequent descriptors preserve the store queue
+		 * and chain them together
+		 */
+		if (i) {
+			prev_hw_desc =
+				iop_hw_desc_slot_idx(hw_desc, i - slots_per_op);
+			prev_hw_desc->next_desc =
+				(u32) (desc->async_tx.phys + (i << 5));
+		}
+	}
+
+	return j;
+}
+
+static inline void
+iop_desc_init_null_xor(struct iop_adma_desc_slot *desc, int src_cnt,
+		       unsigned long flags)
+{
+	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop3xx_aau_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	switch (src_cnt) {
+	case 25 ... 32:
+		u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
+		hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0;
+		/* fall through */
+	case 17 ... 24:
+		if (!u_desc_ctrl.field.blk_ctrl) {
+			hw_desc->src_edc[AAU_EDCR2_IDX].e_desc_ctrl = 0;
+			u_desc_ctrl.field.blk_ctrl = 0x3; /* use EDCR[2:0] */
+		}
+		hw_desc->src_edc[AAU_EDCR1_IDX].e_desc_ctrl = 0;
+		/* fall through */
+	case 9 ... 16:
+		if (!u_desc_ctrl.field.blk_ctrl)
+			u_desc_ctrl.field.blk_ctrl = 0x2; /* use EDCR0 */
+		hw_desc->src_edc[AAU_EDCR0_IDX].e_desc_ctrl = 0;
+		/* fall through */
+	case 1 ... 8:
+		if (!u_desc_ctrl.field.blk_ctrl && src_cnt > 4)
+			u_desc_ctrl.field.blk_ctrl = 0x1; /* use mini-desc */
+	}
+
+	u_desc_ctrl.field.dest_write_en = 0;
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+}
+
+static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan,
+					u32 byte_count)
+{
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		hw_desc.dma->byte_count = byte_count;
+		break;
+	case AAU_ID:
+		hw_desc.aau->byte_count = byte_count;
+		break;
+	default:
+		BUG();
+	}
+}
+
+static inline void
+iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
+			struct iop_adma_chan *chan)
+{
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		iop_desc_init_memcpy(desc, 1);
+		hw_desc.dma->byte_count = 0;
+		hw_desc.dma->dest_addr = 0;
+		hw_desc.dma->src_addr = 0;
+		break;
+	case AAU_ID:
+		iop_desc_init_null_xor(desc, 2, 1);
+		hw_desc.aau->byte_count = 0;
+		hw_desc.aau->dest_addr = 0;
+		hw_desc.aau->src[0] = 0;
+		hw_desc.aau->src[1] = 0;
+		break;
+	default:
+		BUG();
+	}
+}
+
+static inline void
+iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
+{
+	int slots_per_op = desc->slots_per_op;
+	struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter;
+	int i = 0;
+
+	if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
+		hw_desc->byte_count = len;
+	} else {
+		do {
+			iter = iop_hw_desc_slot_idx(hw_desc, i);
+			iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
+			len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
+			i += slots_per_op;
+		} while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT);
+
+		if (len) {
+			iter = iop_hw_desc_slot_idx(hw_desc, i);
+			iter->byte_count = len;
+		}
+	}
+}
+
+static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan,
+					dma_addr_t addr)
+{
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		hw_desc.dma->dest_addr = addr;
+		break;
+	case AAU_ID:
+		hw_desc.aau->dest_addr = addr;
+		break;
+	default:
+		BUG();
+	}
+}
+
+static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
+					dma_addr_t addr)
+{
+	struct iop3xx_desc_dma *hw_desc = desc->hw_desc;
+	hw_desc->src_addr = addr;
+}
+
+static inline void
+iop_desc_set_zero_sum_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
+				dma_addr_t addr)
+{
+
+	struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter;
+	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
+	int i;
+
+	for (i = 0; (slot_cnt -= slots_per_op) >= 0;
+		i += slots_per_op, addr += IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
+		iter = iop_hw_desc_slot_idx(hw_desc, i);
+		iop3xx_aau_desc_set_src_addr(iter, src_idx, addr);
+	}
+}
+
+static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc,
+					int src_idx, dma_addr_t addr)
+{
+
+	struct iop3xx_desc_aau *hw_desc = desc->hw_desc, *iter;
+	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
+	int i;
+
+	for (i = 0; (slot_cnt -= slots_per_op) >= 0;
+		i += slots_per_op, addr += IOP_ADMA_XOR_MAX_BYTE_COUNT) {
+		iter = iop_hw_desc_slot_idx(hw_desc, i);
+		iop3xx_aau_desc_set_src_addr(iter, src_idx, addr);
+	}
+}
+
+static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
+					u32 next_desc_addr)
+{
+	/* hw_desc->next_desc is the same location for all channels */
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+	BUG_ON(hw_desc.dma->next_desc);
+	hw_desc.dma->next_desc = next_desc_addr;
+}
+
+static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc)
+{
+	/* hw_desc->next_desc is the same location for all channels */
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+	return hw_desc.dma->next_desc;
+}
+
+static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc)
+{
+	/* hw_desc->next_desc is the same location for all channels */
+	union iop3xx_desc hw_desc = { .ptr = desc->hw_desc, };
+	hw_desc.dma->next_desc = 0;
+}
+
+static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
+						u32 val)
+{
+	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
+	hw_desc->src[0] = val;
+}
+
+static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
+{
+	struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
+	struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
+
+	BUG_ON(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en));
+	return desc_ctrl.zero_result_err;
+}
+
+static inline void iop_chan_append(struct iop_adma_chan *chan)
+{
+	u32 dma_chan_ctrl;
+
+	dma_chan_ctrl = __raw_readl(DMA_CCR(chan));
+	dma_chan_ctrl |= 0x2;
+	__raw_writel(dma_chan_ctrl, DMA_CCR(chan));
+}
+
+static inline u32 iop_chan_get_status(struct iop_adma_chan *chan)
+{
+	return __raw_readl(DMA_CSR(chan));
+}
+
+static inline void iop_chan_disable(struct iop_adma_chan *chan)
+{
+	u32 dma_chan_ctrl = __raw_readl(DMA_CCR(chan));
+	dma_chan_ctrl &= ~1;
+	__raw_writel(dma_chan_ctrl, DMA_CCR(chan));
+}
+
+static inline void iop_chan_enable(struct iop_adma_chan *chan)
+{
+	u32 dma_chan_ctrl = __raw_readl(DMA_CCR(chan));
+
+	dma_chan_ctrl |= 1;
+	__raw_writel(dma_chan_ctrl, DMA_CCR(chan));
+}
+
+static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan)
+{
+	u32 status = __raw_readl(DMA_CSR(chan));
+	status &= (1 << 9);
+	__raw_writel(status, DMA_CSR(chan));
+}
+
+static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan)
+{
+	u32 status = __raw_readl(DMA_CSR(chan));
+	status &= (1 << 8);
+	__raw_writel(status, DMA_CSR(chan));
+}
+
+static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan)
+{
+	u32 status = __raw_readl(DMA_CSR(chan));
+
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		status &= (1 << 5) | (1 << 3) | (1 << 2) | (1 << 1);
+		break;
+	case AAU_ID:
+		status &= (1 << 5);
+		break;
+	default:
+		BUG();
+	}
+
+	__raw_writel(status, DMA_CSR(chan));
+}
+
+static inline int
+iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan)
+{
+	return 0;
+}
+
+static inline int
+iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return 0;
+}
+
+static inline int
+iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return 0;
+}
+
+static inline int
+iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return test_bit(5, &status);
+}
+
+static inline int
+iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		return test_bit(2, &status);
+	default:
+		return 0;
+	}
+}
+
+static inline int
+iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		return test_bit(3, &status);
+	default:
+		return 0;
+	}
+}
+
+static inline int
+iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan)
+{
+	switch (chan->device->id) {
+	case DMA0_ID:
+	case DMA1_ID:
+		return test_bit(1, &status);
+	default:
+		return 0;
+	}
+}
+#endif /* _ADMA_H */
diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h
new file mode 100644
index 000000000000..b69d972b1f7d
--- /dev/null
+++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/include/asm/hardware/iop3xx-gpio.h
+ *
+ * IOP3xx GPIO wrappers
+ *
+ * Copyright (c) 2008 Arnaud Patard <arnaud.patard@rtp-net.org>
+ * Based on IXP4XX gpio.h file
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
+#define __ASM_ARM_HARDWARE_IOP3XX_GPIO_H
+
+#include <mach/hardware.h>
+#include <asm-generic/gpio.h>
+
+#define IOP3XX_N_GPIOS	8
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	if (gpio > IOP3XX_N_GPIOS)
+		return __gpio_get_value(gpio);
+
+	return gpio_line_get(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (gpio > IOP3XX_N_GPIOS) {
+		__gpio_set_value(gpio, value);
+		return;
+	}
+	gpio_line_set(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	if (gpio < IOP3XX_N_GPIOS)
+		return 0;
+	else
+		return __gpio_cansleep(gpio);
+}
+
+/*
+ * The GPIOs are not generating any interrupt
+ * Note : manuals are not clear about this
+ */
+static inline int gpio_to_irq(int gpio)
+{
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(int gpio)
+{
+	return -EINVAL;
+}
+
+#endif
+
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
new file mode 100644
index 000000000000..4b8e7f559929
--- /dev/null
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -0,0 +1,312 @@
+/*
+ * arch/arm/include/asm/hardware/iop3xx.h
+ *
+ * Intel IOP32X and IOP33X register definitions
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOP3XX_H
+#define __IOP3XX_H
+
+/*
+ * IOP3XX GPIO handling
+ */
+#define GPIO_IN			0
+#define GPIO_OUT		1
+#define GPIO_LOW		0
+#define GPIO_HIGH		1
+#define IOP3XX_GPIO_LINE(x)	(x)
+
+#ifndef __ASSEMBLY__
+extern void gpio_line_config(int line, int direction);
+extern int  gpio_line_get(int line);
+extern void gpio_line_set(int line, int value);
+extern int init_atu;
+extern int iop3xx_get_init_atu(void);
+#endif
+
+
+/*
+ * IOP3XX processor registers
+ */
+#define IOP3XX_PERIPHERAL_PHYS_BASE	0xffffe000
+#define IOP3XX_PERIPHERAL_VIRT_BASE	0xfeffe000
+#define IOP3XX_PERIPHERAL_SIZE		0x00002000
+#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\
+					IOP3XX_PERIPHERAL_SIZE - 1)
+#define IOP3XX_PERIPHERAL_UPPER_VA (IOP3XX_PERIPHERAL_VIRT_BASE +\
+					IOP3XX_PERIPHERAL_SIZE - 1)
+#define IOP3XX_PMMR_PHYS_TO_VIRT(addr) (u32) ((u32) (addr) -\
+					(IOP3XX_PERIPHERAL_PHYS_BASE\
+					- IOP3XX_PERIPHERAL_VIRT_BASE))
+#define IOP3XX_REG_ADDR(reg)		(IOP3XX_PERIPHERAL_VIRT_BASE + (reg))
+
+/* Address Translation Unit  */
+#define IOP3XX_ATUVID		(volatile u16 *)IOP3XX_REG_ADDR(0x0100)
+#define IOP3XX_ATUDID		(volatile u16 *)IOP3XX_REG_ADDR(0x0102)
+#define IOP3XX_ATUCMD		(volatile u16 *)IOP3XX_REG_ADDR(0x0104)
+#define IOP3XX_ATUSR		(volatile u16 *)IOP3XX_REG_ADDR(0x0106)
+#define IOP3XX_ATURID		(volatile u8  *)IOP3XX_REG_ADDR(0x0108)
+#define IOP3XX_ATUCCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0109)
+#define IOP3XX_ATUCLSR		(volatile u8  *)IOP3XX_REG_ADDR(0x010c)
+#define IOP3XX_ATULT		(volatile u8  *)IOP3XX_REG_ADDR(0x010d)
+#define IOP3XX_ATUHTR		(volatile u8  *)IOP3XX_REG_ADDR(0x010e)
+#define IOP3XX_ATUBIST		(volatile u8  *)IOP3XX_REG_ADDR(0x010f)
+#define IOP3XX_IABAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0110)
+#define IOP3XX_IAUBAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0114)
+#define IOP3XX_IABAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0118)
+#define IOP3XX_IAUBAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x011c)
+#define IOP3XX_IABAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0120)
+#define IOP3XX_IAUBAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0124)
+#define IOP3XX_ASVIR		(volatile u16 *)IOP3XX_REG_ADDR(0x012c)
+#define IOP3XX_ASIR		(volatile u16 *)IOP3XX_REG_ADDR(0x012e)
+#define IOP3XX_ERBAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0130)
+#define IOP3XX_ATUILR		(volatile u8  *)IOP3XX_REG_ADDR(0x013c)
+#define IOP3XX_ATUIPR		(volatile u8  *)IOP3XX_REG_ADDR(0x013d)
+#define IOP3XX_ATUMGNT		(volatile u8  *)IOP3XX_REG_ADDR(0x013e)
+#define IOP3XX_ATUMLAT		(volatile u8  *)IOP3XX_REG_ADDR(0x013f)
+#define IOP3XX_IALR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0140)
+#define IOP3XX_IATVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0144)
+#define IOP3XX_ERLR		(volatile u32 *)IOP3XX_REG_ADDR(0x0148)
+#define IOP3XX_ERTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x014c)
+#define IOP3XX_IALR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0150)
+#define IOP3XX_IALR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0154)
+#define IOP3XX_IATVR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0158)
+#define IOP3XX_OIOWTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x015c)
+#define IOP3XX_OMWTVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0160)
+#define IOP3XX_OUMWTVR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0164)
+#define IOP3XX_OMWTVR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0168)
+#define IOP3XX_OUMWTVR1		(volatile u32 *)IOP3XX_REG_ADDR(0x016c)
+#define IOP3XX_OUDWTVR		(volatile u32 *)IOP3XX_REG_ADDR(0x0178)
+#define IOP3XX_ATUCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0180)
+#define IOP3XX_PCSR		(volatile u32 *)IOP3XX_REG_ADDR(0x0184)
+#define IOP3XX_ATUISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0188)
+#define IOP3XX_ATUIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x018c)
+#define IOP3XX_IABAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0190)
+#define IOP3XX_IAUBAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0194)
+#define IOP3XX_IALR3		(volatile u32 *)IOP3XX_REG_ADDR(0x0198)
+#define IOP3XX_IATVR3		(volatile u32 *)IOP3XX_REG_ADDR(0x019c)
+#define IOP3XX_OCCAR		(volatile u32 *)IOP3XX_REG_ADDR(0x01a4)
+#define IOP3XX_OCCDR		(volatile u32 *)IOP3XX_REG_ADDR(0x01ac)
+#define IOP3XX_PDSCR		(volatile u32 *)IOP3XX_REG_ADDR(0x01bc)
+#define IOP3XX_PMCAPID		(volatile u8  *)IOP3XX_REG_ADDR(0x01c0)
+#define IOP3XX_PMNEXT		(volatile u8  *)IOP3XX_REG_ADDR(0x01c1)
+#define IOP3XX_APMCR		(volatile u16 *)IOP3XX_REG_ADDR(0x01c2)
+#define IOP3XX_APMCSR		(volatile u16 *)IOP3XX_REG_ADDR(0x01c4)
+#define IOP3XX_PCIXCAPID	(volatile u8  *)IOP3XX_REG_ADDR(0x01e0)
+#define IOP3XX_PCIXNEXT		(volatile u8  *)IOP3XX_REG_ADDR(0x01e1)
+#define IOP3XX_PCIXCMD		(volatile u16 *)IOP3XX_REG_ADDR(0x01e2)
+#define IOP3XX_PCIXSR		(volatile u32 *)IOP3XX_REG_ADDR(0x01e4)
+#define IOP3XX_PCIIRSR		(volatile u32 *)IOP3XX_REG_ADDR(0x01ec)
+#define IOP3XX_PCSR_OUT_Q_BUSY (1 << 15)
+#define IOP3XX_PCSR_IN_Q_BUSY	(1 << 14)
+#define IOP3XX_ATUCR_OUT_EN	(1 << 1)
+
+#define IOP3XX_INIT_ATU_DEFAULT 0
+#define IOP3XX_INIT_ATU_DISABLE -1
+#define IOP3XX_INIT_ATU_ENABLE	 1
+
+/* Messaging Unit  */
+#define IOP3XX_IMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0310)
+#define IOP3XX_IMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0314)
+#define IOP3XX_OMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0318)
+#define IOP3XX_OMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x031c)
+#define IOP3XX_IDR		(volatile u32 *)IOP3XX_REG_ADDR(0x0320)
+#define IOP3XX_IISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0324)
+#define IOP3XX_IIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0328)
+#define IOP3XX_ODR		(volatile u32 *)IOP3XX_REG_ADDR(0x032c)
+#define IOP3XX_OISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0330)
+#define IOP3XX_OIMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0334)
+#define IOP3XX_MUCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0350)
+#define IOP3XX_QBAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0354)
+#define IOP3XX_IFHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0360)
+#define IOP3XX_IFTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0364)
+#define IOP3XX_IPHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0368)
+#define IOP3XX_IPTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x036c)
+#define IOP3XX_OFHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0370)
+#define IOP3XX_OFTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0374)
+#define IOP3XX_OPHPR		(volatile u32 *)IOP3XX_REG_ADDR(0x0378)
+#define IOP3XX_OPTPR		(volatile u32 *)IOP3XX_REG_ADDR(0x037c)
+#define IOP3XX_IAR		(volatile u32 *)IOP3XX_REG_ADDR(0x0380)
+
+/* DMA Controller  */
+#define IOP3XX_DMA_PHYS_BASE(chan) (IOP3XX_PERIPHERAL_PHYS_BASE + \
+					(0x400 + (chan << 6)))
+#define IOP3XX_DMA_UPPER_PA(chan)  (IOP3XX_DMA_PHYS_BASE(chan) + 0x27)
+
+/* Peripheral bus interface  */
+#define IOP3XX_PBCR		(volatile u32 *)IOP3XX_REG_ADDR(0x0680)
+#define IOP3XX_PBISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0684)
+#define IOP3XX_PBBAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0688)
+#define IOP3XX_PBLR0		(volatile u32 *)IOP3XX_REG_ADDR(0x068c)
+#define IOP3XX_PBBAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0690)
+#define IOP3XX_PBLR1		(volatile u32 *)IOP3XX_REG_ADDR(0x0694)
+#define IOP3XX_PBBAR2		(volatile u32 *)IOP3XX_REG_ADDR(0x0698)
+#define IOP3XX_PBLR2		(volatile u32 *)IOP3XX_REG_ADDR(0x069c)
+#define IOP3XX_PBBAR3		(volatile u32 *)IOP3XX_REG_ADDR(0x06a0)
+#define IOP3XX_PBLR3		(volatile u32 *)IOP3XX_REG_ADDR(0x06a4)
+#define IOP3XX_PBBAR4		(volatile u32 *)IOP3XX_REG_ADDR(0x06a8)
+#define IOP3XX_PBLR4		(volatile u32 *)IOP3XX_REG_ADDR(0x06ac)
+#define IOP3XX_PBBAR5		(volatile u32 *)IOP3XX_REG_ADDR(0x06b0)
+#define IOP3XX_PBLR5		(volatile u32 *)IOP3XX_REG_ADDR(0x06b4)
+#define IOP3XX_PMBR0		(volatile u32 *)IOP3XX_REG_ADDR(0x06c0)
+#define IOP3XX_PMBR1		(volatile u32 *)IOP3XX_REG_ADDR(0x06e0)
+#define IOP3XX_PMBR2		(volatile u32 *)IOP3XX_REG_ADDR(0x06e4)
+
+/* Peripheral performance monitoring unit  */
+#define IOP3XX_GTMR		(volatile u32 *)IOP3XX_REG_ADDR(0x0700)
+#define IOP3XX_ESR		(volatile u32 *)IOP3XX_REG_ADDR(0x0704)
+#define IOP3XX_EMISR		(volatile u32 *)IOP3XX_REG_ADDR(0x0708)
+#define IOP3XX_GTSR		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
+/* PERCR0 DOESN'T EXIST - index from 1! */
+#define IOP3XX_PERCR0		(volatile u32 *)IOP3XX_REG_ADDR(0x0710)
+
+/* General Purpose I/O  */
+#define IOP3XX_GPOE		(volatile u32 *)IOP3XX_GPIO_REG(0x0000)
+#define IOP3XX_GPID		(volatile u32 *)IOP3XX_GPIO_REG(0x0004)
+#define IOP3XX_GPOD		(volatile u32 *)IOP3XX_GPIO_REG(0x0008)
+
+/* Timers  */
+#define IOP3XX_TU_TMR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0000)
+#define IOP3XX_TU_TMR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0004)
+#define IOP3XX_TU_TCR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0008)
+#define IOP3XX_TU_TCR1		(volatile u32 *)IOP3XX_TIMER_REG(0x000c)
+#define IOP3XX_TU_TRR0		(volatile u32 *)IOP3XX_TIMER_REG(0x0010)
+#define IOP3XX_TU_TRR1		(volatile u32 *)IOP3XX_TIMER_REG(0x0014)
+#define IOP3XX_TU_TISR		(volatile u32 *)IOP3XX_TIMER_REG(0x0018)
+#define IOP3XX_TU_WDTCR		(volatile u32 *)IOP3XX_TIMER_REG(0x001c)
+#define IOP_TMR_EN	    0x02
+#define IOP_TMR_RELOAD	    0x04
+#define IOP_TMR_PRIVILEGED 0x08
+#define IOP_TMR_RATIO_1_1  0x00
+
+/* Watchdog timer definitions */
+#define IOP_WDTCR_EN_ARM        0x1e1e1e1e
+#define IOP_WDTCR_EN            0xe1e1e1e1
+/* iop3xx does not support stopping the watchdog, so we just re-arm */
+#define IOP_WDTCR_DIS_ARM	(IOP_WDTCR_EN_ARM)
+#define IOP_WDTCR_DIS		(IOP_WDTCR_EN)
+
+/* Application accelerator unit  */
+#define IOP3XX_AAU_PHYS_BASE (IOP3XX_PERIPHERAL_PHYS_BASE + 0x800)
+#define IOP3XX_AAU_UPPER_PA (IOP3XX_AAU_PHYS_BASE + 0xa7)
+
+/* I2C bus interface unit  */
+#define IOP3XX_ICR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1680)
+#define IOP3XX_ISR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1684)
+#define IOP3XX_ISAR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1688)
+#define IOP3XX_IDBR0		(volatile u32 *)IOP3XX_REG_ADDR(0x168c)
+#define IOP3XX_IBMR0		(volatile u32 *)IOP3XX_REG_ADDR(0x1694)
+#define IOP3XX_ICR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a0)
+#define IOP3XX_ISR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a4)
+#define IOP3XX_ISAR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16a8)
+#define IOP3XX_IDBR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16ac)
+#define IOP3XX_IBMR1		(volatile u32 *)IOP3XX_REG_ADDR(0x16b4)
+
+
+/*
+ * IOP3XX I/O and Mem space regions for PCI autoconfiguration
+ */
+#define IOP3XX_PCI_LOWER_MEM_PA	0x80000000
+
+#define IOP3XX_PCI_IO_WINDOW_SIZE	0x00010000
+#define IOP3XX_PCI_LOWER_IO_PA		0x90000000
+#define IOP3XX_PCI_LOWER_IO_VA		0xfe000000
+#define IOP3XX_PCI_LOWER_IO_BA		0x90000000
+#define IOP3XX_PCI_UPPER_IO_PA		(IOP3XX_PCI_LOWER_IO_PA +\
+					IOP3XX_PCI_IO_WINDOW_SIZE - 1)
+#define IOP3XX_PCI_UPPER_IO_VA		(IOP3XX_PCI_LOWER_IO_VA +\
+					IOP3XX_PCI_IO_WINDOW_SIZE - 1)
+#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) (addr) -\
+					IOP3XX_PCI_LOWER_IO_PA) +\
+					IOP3XX_PCI_LOWER_IO_VA)
+
+
+#ifndef __ASSEMBLY__
+void iop3xx_map_io(void);
+void iop_init_cp6_handler(void);
+void iop_init_time(unsigned long tickrate);
+unsigned long iop_gettimeoffset(void);
+
+static inline void write_tmr0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c0, c1, 0" : : "r" (val));
+}
+
+static inline void write_tmr1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c1, c1, 0" : : "r" (val));
+}
+
+static inline u32 read_tcr0(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c2, c1, 0" : "=r" (val));
+	return val;
+}
+
+static inline u32 read_tcr1(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c3, c1, 0" : "=r" (val));
+	return val;
+}
+
+static inline void write_trr0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val));
+}
+
+static inline void write_trr1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c5, c1, 0" : : "r" (val));
+}
+
+static inline void write_tisr(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c6, c1, 0" : : "r" (val));
+}
+
+static inline u32 read_wdtcr(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c7, c1, 0":"=r" (val));
+	return val;
+}
+static inline void write_wdtcr(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c7, c1, 0"::"r" (val));
+}
+
+extern unsigned long get_iop_tick_rate(void);
+
+/* only iop13xx has these registers, we define these to present a
+ * common register interface for the iop_wdt driver.
+ */
+#define IOP_RCSR_WDT	(0)
+static inline u32 read_rcsr(void)
+{
+	return 0;
+}
+static inline void write_wdtsr(u32 val)
+{
+	do { } while (0);
+}
+
+extern struct platform_device iop3xx_dma_0_channel;
+extern struct platform_device iop3xx_dma_1_channel;
+extern struct platform_device iop3xx_aau_channel;
+extern struct platform_device iop3xx_i2c0_device;
+extern struct platform_device iop3xx_i2c1_device;
+
+#endif
+
+
+#endif
diff --git a/arch/arm/include/asm/hardware/iop_adma.h b/arch/arm/include/asm/hardware/iop_adma.h
new file mode 100644
index 000000000000..cb7e3611bcba
--- /dev/null
+++ b/arch/arm/include/asm/hardware/iop_adma.h
@@ -0,0 +1,116 @@
+/*
+ * Copyright © 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#ifndef IOP_ADMA_H
+#define IOP_ADMA_H
+#include <linux/types.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+
+#define IOP_ADMA_SLOT_SIZE 32
+#define IOP_ADMA_THRESHOLD 4
+
+/**
+ * struct iop_adma_device - internal representation of an ADMA device
+ * @pdev: Platform device
+ * @id: HW ADMA Device selector
+ * @dma_desc_pool: base of DMA descriptor region (DMA address)
+ * @dma_desc_pool_virt: base of DMA descriptor region (CPU address)
+ * @common: embedded struct dma_device
+ */
+struct iop_adma_device {
+	struct platform_device *pdev;
+	int id;
+	dma_addr_t dma_desc_pool;
+	void *dma_desc_pool_virt;
+	struct dma_device common;
+};
+
+/**
+ * struct iop_adma_chan - internal representation of an ADMA device
+ * @pending: allows batching of hardware operations
+ * @completed_cookie: identifier for the most recently completed operation
+ * @lock: serializes enqueue/dequeue operations to the slot pool
+ * @mmr_base: memory mapped register base
+ * @chain: device chain view of the descriptors
+ * @device: parent device
+ * @common: common dmaengine channel object members
+ * @last_used: place holder for allocation to continue from where it left off
+ * @all_slots: complete domain of slots usable by the channel
+ * @slots_allocated: records the actual size of the descriptor slot pool
+ * @irq_tasklet: bottom half where iop_adma_slot_cleanup runs
+ */
+struct iop_adma_chan {
+	int pending;
+	dma_cookie_t completed_cookie;
+	spinlock_t lock; /* protects the descriptor slot pool */
+	void __iomem *mmr_base;
+	struct list_head chain;
+	struct iop_adma_device *device;
+	struct dma_chan common;
+	struct iop_adma_desc_slot *last_used;
+	struct list_head all_slots;
+	int slots_allocated;
+	struct tasklet_struct irq_tasklet;
+};
+
+/**
+ * struct iop_adma_desc_slot - IOP-ADMA software descriptor
+ * @slot_node: node on the iop_adma_chan.all_slots list
+ * @chain_node: node on the op_adma_chan.chain list
+ * @hw_desc: virtual address of the hardware descriptor chain
+ * @phys: hardware address of the hardware descriptor chain
+ * @group_head: first operation in a transaction
+ * @slot_cnt: total slots used in an transaction (group of operations)
+ * @slots_per_op: number of slots per operation
+ * @idx: pool index
+ * @unmap_src_cnt: number of xor sources
+ * @unmap_len: transaction bytecount
+ * @async_tx: support for the async_tx api
+ * @group_list: list of slots that make up a multi-descriptor transaction
+ *	for example transfer lengths larger than the supported hw max
+ * @xor_check_result: result of zero sum
+ * @crc32_result: result crc calculation
+ */
+struct iop_adma_desc_slot {
+	struct list_head slot_node;
+	struct list_head chain_node;
+	void *hw_desc;
+	struct iop_adma_desc_slot *group_head;
+	u16 slot_cnt;
+	u16 slots_per_op;
+	u16 idx;
+	u16 unmap_src_cnt;
+	size_t unmap_len;
+	struct dma_async_tx_descriptor async_tx;
+	union {
+		u32 *xor_check_result;
+		u32 *crc32_result;
+	};
+};
+
+struct iop_adma_platform_data {
+	int hw_id;
+	dma_cap_mask_t cap_mask;
+	size_t pool_size;
+};
+
+#define to_iop_sw_desc(addr_hw_desc) \
+	container_of(addr_hw_desc, struct iop_adma_desc_slot, hw_desc)
+#define iop_hw_desc_slot_idx(hw_desc, idx) \
+	( (void *) (((unsigned long) hw_desc) + ((idx) << 5)) )
+#endif
diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h
new file mode 100644
index 000000000000..74b5fff7f575
--- /dev/null
+++ b/arch/arm/include/asm/hardware/it8152.h
@@ -0,0 +1,99 @@
+/*
+ * linux/include/arm/hardware/it8152.h
+ *
+ * Copyright Compulab Ltd., 2006,2007
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * ITE 8152 companion chip register definitions
+ */
+
+#ifndef __ASM_HARDWARE_IT8152_H
+#define __ASM_HARDWARE_IT8152_H
+extern unsigned long it8152_base_address;
+
+#define IT8152_IO_BASE			(it8152_base_address + 0x03e00000)
+#define IT8152_CFGREG_BASE		(it8152_base_address + 0x03f00000)
+
+#define __REG_IT8152(x)			(it8152_base_address + (x))
+
+#define IT8152_PCI_CFG_ADDR		__REG_IT8152(0x3f00800)
+#define IT8152_PCI_CFG_DATA		__REG_IT8152(0x3f00804)
+
+#define IT8152_INTC_LDCNIRR		__REG_IT8152(0x3f00300)
+#define IT8152_INTC_LDPNIRR		__REG_IT8152(0x3f00304)
+#define IT8152_INTC_LDCNIMR		__REG_IT8152(0x3f00308)
+#define IT8152_INTC_LDPNIMR		__REG_IT8152(0x3f0030C)
+#define IT8152_INTC_LDNITR		__REG_IT8152(0x3f00310)
+#define IT8152_INTC_LDNIAR		__REG_IT8152(0x3f00314)
+#define IT8152_INTC_LPCNIRR		__REG_IT8152(0x3f00320)
+#define IT8152_INTC_LPPNIRR		__REG_IT8152(0x3f00324)
+#define IT8152_INTC_LPCNIMR		__REG_IT8152(0x3f00328)
+#define IT8152_INTC_LPPNIMR		__REG_IT8152(0x3f0032C)
+#define IT8152_INTC_LPNITR		__REG_IT8152(0x3f00330)
+#define IT8152_INTC_LPNIAR		__REG_IT8152(0x3f00334)
+#define IT8152_INTC_PDCNIRR		__REG_IT8152(0x3f00340)
+#define IT8152_INTC_PDPNIRR		__REG_IT8152(0x3f00344)
+#define IT8152_INTC_PDCNIMR		__REG_IT8152(0x3f00348)
+#define IT8152_INTC_PDPNIMR		__REG_IT8152(0x3f0034C)
+#define IT8152_INTC_PDNITR		__REG_IT8152(0x3f00350)
+#define IT8152_INTC_PDNIAR		__REG_IT8152(0x3f00354)
+#define IT8152_INTC_INTC_TYPER		__REG_IT8152(0x3f003FC)
+
+#define IT8152_GPIO_GPDR		__REG_IT8152(0x3f00500)
+
+/*
+  Interrupt controller per register summary:
+  ---------------------------------------
+  LCDNIRR:
+  IT8152_LD_IRQ(8) PCICLK stop
+  IT8152_LD_IRQ(7) MCLK ready
+  IT8152_LD_IRQ(6) s/w
+  IT8152_LD_IRQ(5) UART
+  IT8152_LD_IRQ(4) GPIO
+  IT8152_LD_IRQ(3) TIMER 4
+  IT8152_LD_IRQ(2) TIMER 3
+  IT8152_LD_IRQ(1) TIMER 2
+  IT8152_LD_IRQ(0) TIMER 1
+
+  LPCNIRR:
+  IT8152_LP_IRQ(x) serial IRQ x
+
+  PCIDNIRR:
+  IT8152_PD_IRQ(14) PCISERR
+  IT8152_PD_IRQ(13) CPU/PCI bridge target abort (h2pTADR)
+  IT8152_PD_IRQ(12) CPU/PCI bridge master abort (h2pMADR)
+  IT8152_PD_IRQ(11) PCI INTD
+  IT8152_PD_IRQ(10) PCI INTC
+  IT8152_PD_IRQ(9)  PCI INTB
+  IT8152_PD_IRQ(8)  PCI INTA
+  IT8152_PD_IRQ(7)  serial INTD
+  IT8152_PD_IRQ(6)  serial INTC
+  IT8152_PD_IRQ(5)  serial INTB
+  IT8152_PD_IRQ(4)  serial INTA
+  IT8152_PD_IRQ(3)  serial IRQ IOCHK (IOCHKR)
+  IT8152_PD_IRQ(2)  chaining DMA (CDMAR)
+  IT8152_PD_IRQ(1)  USB (USBR)
+  IT8152_PD_IRQ(0)  Audio controller (ACR)
+ */
+/* frequently used interrupts */
+#define IT8152_PCISERR		IT8152_PD_IRQ(14)
+#define IT8152_H2PTADR		IT8152_PD_IRQ(13)
+#define IT8152_H2PMAR		IT8152_PD_IRQ(12)
+#define IT8152_PCI_INTD		IT8152_PD_IRQ(11)
+#define IT8152_PCI_INTC		IT8152_PD_IRQ(10)
+#define IT8152_PCI_INTB		IT8152_PD_IRQ(9)
+#define IT8152_PCI_INTA		IT8152_PD_IRQ(8)
+#define IT8152_CDMA_INT		IT8152_PD_IRQ(2)
+#define IT8152_USB_INT		IT8152_PD_IRQ(1)
+#define IT8152_AUDIO_INT	IT8152_PD_IRQ(0)
+
+struct pci_dev;
+struct pci_sys_data;
+
+extern void it8152_irq_demux(unsigned int irq, struct irq_desc *desc);
+extern void it8152_init_irq(void);
+extern int it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
+extern int it8152_pci_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *it8152_pci_scan_bus(int nr, struct pci_sys_data *sys);
+
+#endif /* __ASM_HARDWARE_IT8152_H */
diff --git a/arch/arm/include/asm/hardware/linkup-l1110.h b/arch/arm/include/asm/hardware/linkup-l1110.h
new file mode 100644
index 000000000000..7ec91168a576
--- /dev/null
+++ b/arch/arm/include/asm/hardware/linkup-l1110.h
@@ -0,0 +1,48 @@
+/*
+*
+* Definitions for H3600 Handheld Computer
+*
+* Copyright 2001 Compaq Computer Corporation.
+*
+* Use consistent with the GNU GPL is permitted,
+* provided that this copyright notice is
+* preserved in its entirety in all copies and derived works.
+*
+* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+* FITNESS FOR ANY PARTICULAR PURPOSE.
+*
+* Author: Jamey Hicks.
+*
+*/
+
+/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */
+
+/* PC Card Status Register */
+#define LINKUP_PRS_S1	(1 << 0) /* voltage control bits S1-S4 */
+#define LINKUP_PRS_S2	(1 << 1)
+#define LINKUP_PRS_S3	(1 << 2)
+#define LINKUP_PRS_S4	(1 << 3)
+#define LINKUP_PRS_BVD1	(1 << 4)
+#define LINKUP_PRS_BVD2	(1 << 5)
+#define LINKUP_PRS_VS1	(1 << 6)
+#define LINKUP_PRS_VS2	(1 << 7)
+#define LINKUP_PRS_RDY	(1 << 8)
+#define LINKUP_PRS_CD1	(1 << 9)
+#define LINKUP_PRS_CD2	(1 << 10)
+
+/* PC Card Command Register */
+#define LINKUP_PRC_S1	(1 << 0)
+#define LINKUP_PRC_S2	(1 << 1)
+#define LINKUP_PRC_S3	(1 << 2)
+#define LINKUP_PRC_S4	(1 << 3)
+#define LINKUP_PRC_RESET (1 << 4)
+#define LINKUP_PRC_APOE	(1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */
+#define LINKUP_PRC_CFE	(1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */
+#define LINKUP_PRC_SOE	(1 << 7) /* signal output driver enable */
+#define LINKUP_PRC_SSP	(1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */
+#define LINKUP_PRC_MBZ	(1 << 15) /* must be zero */
+
+struct linkup_l1110 {
+	volatile short prc;
+};
diff --git a/arch/arm/include/asm/hardware/locomo.h b/arch/arm/include/asm/hardware/locomo.h
new file mode 100644
index 000000000000..954b1be991b4
--- /dev/null
+++ b/arch/arm/include/asm/hardware/locomo.h
@@ -0,0 +1,217 @@
+/*
+ * arch/arm/include/asm/hardware/locomo.h
+ *
+ * This file contains the definitions for the LoCoMo G/A Chip
+ *
+ * (C) Copyright 2004 John Lenz
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Based on sa1111.h
+ */
+#ifndef _ASM_ARCH_LOCOMO
+#define _ASM_ARCH_LOCOMO
+
+#define locomo_writel(val,addr)	({ *(volatile u16 *)(addr) = (val); })
+#define locomo_readl(addr)	(*(volatile u16 *)(addr))
+
+/* LOCOMO version */
+#define LOCOMO_VER	0x00
+
+/* Pin status */
+#define LOCOMO_ST	0x04
+
+/* Pin status */
+#define LOCOMO_C32K	0x08
+
+/* Interrupt controller */
+#define LOCOMO_ICR	0x0C
+
+/* MCS decoder for boot selecting */
+#define LOCOMO_MCSX0	0x10
+#define LOCOMO_MCSX1	0x14
+#define LOCOMO_MCSX2	0x18
+#define LOCOMO_MCSX3	0x1c
+
+/* Touch panel controller */
+#define LOCOMO_ASD	0x20		/* AD start delay */
+#define LOCOMO_HSD	0x28		/* HSYS delay */
+#define LOCOMO_HSC	0x2c		/* HSYS period */
+#define LOCOMO_TADC	0x30		/* tablet ADC clock */
+
+
+/* Long time timer */
+#define LOCOMO_LTC	0xd8		/* LTC interrupt setting */
+#define LOCOMO_LTINT	0xdc		/* LTC interrupt */
+
+/* DAC control signal for LCD (COMADJ ) */
+#define LOCOMO_DAC		0xe0
+/* DAC control */
+#define	LOCOMO_DAC_SCLOEB	0x08	/* SCL pin output data       */
+#define	LOCOMO_DAC_TEST		0x04	/* Test bit                  */
+#define	LOCOMO_DAC_SDA		0x02	/* SDA pin level (read-only) */
+#define	LOCOMO_DAC_SDAOEB	0x01	/* SDA pin output data       */
+
+/* SPI interface */
+#define LOCOMO_SPI	0x60
+#define LOCOMO_SPIMD	0x00		/* SPI mode setting */
+#define LOCOMO_SPICT	0x04		/* SPI mode control */
+#define LOCOMO_SPIST	0x08		/* SPI status */
+#define	LOCOMO_SPI_TEND	(1 << 3)	/* Transfer end bit */
+#define	LOCOMO_SPI_REND	(1 << 2)	/* Receive end bit */
+#define	LOCOMO_SPI_RFW	(1 << 1)	/* write buffer bit */
+#define	LOCOMO_SPI_RFR	(1)		/* read buffer bit */
+
+#define LOCOMO_SPIIS	0x10		/* SPI interrupt status */
+#define LOCOMO_SPIWE	0x14		/* SPI interrupt status write enable */
+#define LOCOMO_SPIIE	0x18		/* SPI interrupt enable */
+#define LOCOMO_SPIIR	0x1c		/* SPI interrupt request */
+#define LOCOMO_SPITD	0x20		/* SPI transfer data write */
+#define LOCOMO_SPIRD	0x24		/* SPI receive data read */
+#define LOCOMO_SPITS	0x28		/* SPI transfer data shift */
+#define LOCOMO_SPIRS	0x2C		/* SPI receive data shift */
+
+/* GPIO */
+#define LOCOMO_GPD		0x90	/* GPIO direction */
+#define LOCOMO_GPE		0x94	/* GPIO input enable */
+#define LOCOMO_GPL		0x98	/* GPIO level */
+#define LOCOMO_GPO		0x9c	/* GPIO out data setting */
+#define LOCOMO_GRIE		0xa0	/* GPIO rise detection */
+#define LOCOMO_GFIE		0xa4	/* GPIO fall detection */
+#define LOCOMO_GIS		0xa8	/* GPIO edge detection status */
+#define LOCOMO_GWE		0xac	/* GPIO status write enable */
+#define LOCOMO_GIE		0xb0	/* GPIO interrupt enable */
+#define LOCOMO_GIR		0xb4	/* GPIO interrupt request */
+#define	LOCOMO_GPIO(Nb)		(0x01 << (Nb))
+#define LOCOMO_GPIO_RTS		LOCOMO_GPIO(0)
+#define LOCOMO_GPIO_CTS		LOCOMO_GPIO(1)
+#define LOCOMO_GPIO_DSR		LOCOMO_GPIO(2)
+#define LOCOMO_GPIO_DTR		LOCOMO_GPIO(3)
+#define LOCOMO_GPIO_LCD_VSHA_ON	LOCOMO_GPIO(4)
+#define LOCOMO_GPIO_LCD_VSHD_ON	LOCOMO_GPIO(5)
+#define LOCOMO_GPIO_LCD_VEE_ON	LOCOMO_GPIO(6)
+#define LOCOMO_GPIO_LCD_MOD	LOCOMO_GPIO(7)
+#define LOCOMO_GPIO_DAC_ON	LOCOMO_GPIO(8)
+#define LOCOMO_GPIO_FL_VR	LOCOMO_GPIO(9)
+#define LOCOMO_GPIO_DAC_SDATA	LOCOMO_GPIO(10)
+#define LOCOMO_GPIO_DAC_SCK	LOCOMO_GPIO(11)
+#define LOCOMO_GPIO_DAC_SLOAD	LOCOMO_GPIO(12)
+#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13)
+#define LOCOMO_GPIO_WRITE_PROT  LOCOMO_GPIO(14)
+#define LOCOMO_GPIO_CARD_POWER  LOCOMO_GPIO(15)
+
+/* Start the definitions of the devices.  Each device has an initial
+ * base address and a series of offsets from that base address. */
+
+/* Keyboard controller */
+#define LOCOMO_KEYBOARD		0x40
+#define LOCOMO_KIB		0x00	/* KIB level */
+#define LOCOMO_KSC		0x04	/* KSTRB control */
+#define LOCOMO_KCMD		0x08	/* KSTRB command */
+#define LOCOMO_KIC		0x0c	/* Key interrupt */
+
+/* Front light adjustment controller */
+#define LOCOMO_FRONTLIGHT	0xc8
+#define LOCOMO_ALS		0x00	/* Adjust light cycle */
+#define LOCOMO_ALD		0x04	/* Adjust light duty */
+
+#define LOCOMO_ALC_EN		0x8000
+
+/* Backlight controller: TFT signal */
+#define LOCOMO_BACKLIGHT	0x38
+#define LOCOMO_TC		0x00		/* TFT control signal */
+#define LOCOMO_CPSD		0x04		/* CPS delay */
+
+/* Audio controller */
+#define LOCOMO_AUDIO		0x54
+#define LOCOMO_ACC		0x00	/* Audio clock */
+#define LOCOMO_PAIF		0xD0	/* PCM audio interface */
+/* Audio clock */
+#define	LOCOMO_ACC_XON		0x80
+#define	LOCOMO_ACC_XEN		0x40
+#define	LOCOMO_ACC_XSEL0	0x00
+#define	LOCOMO_ACC_XSEL1	0x20
+#define	LOCOMO_ACC_MCLKEN	0x10
+#define	LOCOMO_ACC_64FSEN	0x08
+#define	LOCOMO_ACC_CLKSEL000	0x00	/* mclk  2 */
+#define	LOCOMO_ACC_CLKSEL001	0x01	/* mclk  3 */
+#define	LOCOMO_ACC_CLKSEL010	0x02	/* mclk  4 */
+#define	LOCOMO_ACC_CLKSEL011	0x03	/* mclk  6 */
+#define	LOCOMO_ACC_CLKSEL100	0x04	/* mclk  8 */
+#define	LOCOMO_ACC_CLKSEL101	0x05	/* mclk 12 */
+/* PCM audio interface */
+#define	LOCOMO_PAIF_SCINV	0x20
+#define	LOCOMO_PAIF_SCEN	0x10
+#define	LOCOMO_PAIF_LRCRST	0x08
+#define	LOCOMO_PAIF_LRCEVE	0x04
+#define	LOCOMO_PAIF_LRCINV	0x02
+#define	LOCOMO_PAIF_LRCEN	0x01
+
+/* LED controller */
+#define LOCOMO_LED		0xe8
+#define LOCOMO_LPT0		0x00
+#define LOCOMO_LPT1		0x04
+/* LED control */
+#define LOCOMO_LPT_TOFH		0x80
+#define LOCOMO_LPT_TOFL		0x08
+#define LOCOMO_LPT_TOH(TOH)	((TOH & 0x7) << 4)
+#define LOCOMO_LPT_TOL(TOL)	((TOL & 0x7))
+
+extern struct bus_type locomo_bus_type;
+
+#define LOCOMO_DEVID_KEYBOARD	0
+#define LOCOMO_DEVID_FRONTLIGHT	1
+#define LOCOMO_DEVID_BACKLIGHT	2
+#define LOCOMO_DEVID_AUDIO	3
+#define LOCOMO_DEVID_LED	4
+#define LOCOMO_DEVID_UART	5
+#define LOCOMO_DEVID_SPI	6
+
+struct locomo_dev {
+	struct device	dev;
+	unsigned int	devid;
+	unsigned int	irq[1];
+
+	void		*mapbase;
+	unsigned long	length;
+
+	u64		dma_mask;
+};
+
+#define LOCOMO_DEV(_d)	container_of((_d), struct locomo_dev, dev)
+
+#define locomo_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
+#define locomo_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, p)
+
+struct locomo_driver {
+	struct device_driver	drv;
+	unsigned int		devid;
+	int (*probe)(struct locomo_dev *);
+	int (*remove)(struct locomo_dev *);
+	int (*suspend)(struct locomo_dev *, pm_message_t);
+	int (*resume)(struct locomo_dev *);
+};
+
+#define LOCOMO_DRV(_d)	container_of((_d), struct locomo_driver, drv)
+
+#define LOCOMO_DRIVER_NAME(_ldev) ((_ldev)->dev.driver->name)
+
+void locomo_lcd_power(struct locomo_dev *, int, unsigned int);
+
+int locomo_driver_register(struct locomo_driver *);
+void locomo_driver_unregister(struct locomo_driver *);
+
+/* GPIO control functions */
+void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir);
+int locomo_gpio_read_level(struct device *dev, unsigned int bits);
+int locomo_gpio_read_output(struct device *dev, unsigned int bits);
+void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set);
+
+/* M62332 control function */
+void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);
+
+/* Frontlight control */
+void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf);
+
+#endif
diff --git a/arch/arm/include/asm/hardware/memc.h b/arch/arm/include/asm/hardware/memc.h
new file mode 100644
index 000000000000..42ba7c167d1f
--- /dev/null
+++ b/arch/arm/include/asm/hardware/memc.h
@@ -0,0 +1,26 @@
+/*
+ *  arch/arm/include/asm/hardware/memc.h
+ *
+ *  Copyright (C) Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VDMA_ALIGNMENT	PAGE_SIZE
+#define VDMA_XFERSIZE	16
+#define VDMA_INIT	0
+#define VDMA_START	1
+#define VDMA_END	2
+
+#ifndef __ASSEMBLY__
+extern void memc_write(unsigned int reg, unsigned long val);
+
+#define video_set_dma(start,end,offset)				\
+do {								\
+	memc_write (VDMA_START, (start >> 2));			\
+	memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2);	\
+	memc_write (VDMA_INIT, (offset >> 2));			\
+} while (0)
+
+#endif
diff --git a/arch/arm/include/asm/hardware/pci_v3.h b/arch/arm/include/asm/hardware/pci_v3.h
new file mode 100644
index 000000000000..2811c7e2cfdf
--- /dev/null
+++ b/arch/arm/include/asm/hardware/pci_v3.h
@@ -0,0 +1,186 @@
+/*
+ *  arch/arm/include/asm/hardware/pci_v3.h
+ *
+ *  Internal header file PCI V3 chip
+ *
+ *  Copyright (C) ARM Limited
+ *  Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef ASM_ARM_HARDWARE_PCI_V3_H
+#define ASM_ARM_HARDWARE_PCI_V3_H
+
+/* -------------------------------------------------------------------------------
+ *  V3 Local Bus to PCI Bridge definitions
+ * -------------------------------------------------------------------------------
+ *  Registers (these are taken from page 129 of the EPC User's Manual Rev 1.04
+ *  All V3 register names are prefaced by V3_ to avoid clashing with any other
+ *  PCI definitions.  Their names match the user's manual.
+ * 
+ *  I'm assuming that I20 is disabled.
+ * 
+ */
+#define V3_PCI_VENDOR                   0x00000000
+#define V3_PCI_DEVICE                   0x00000002
+#define V3_PCI_CMD                      0x00000004
+#define V3_PCI_STAT                     0x00000006
+#define V3_PCI_CC_REV                   0x00000008
+#define V3_PCI_HDR_CFG                  0x0000000C
+#define V3_PCI_IO_BASE                  0x00000010
+#define V3_PCI_BASE0                    0x00000014
+#define V3_PCI_BASE1                    0x00000018
+#define V3_PCI_SUB_VENDOR               0x0000002C
+#define V3_PCI_SUB_ID                   0x0000002E
+#define V3_PCI_ROM                      0x00000030
+#define V3_PCI_BPARAM                   0x0000003C
+#define V3_PCI_MAP0                     0x00000040
+#define V3_PCI_MAP1                     0x00000044
+#define V3_PCI_INT_STAT                 0x00000048
+#define V3_PCI_INT_CFG                  0x0000004C 
+#define V3_LB_BASE0                     0x00000054
+#define V3_LB_BASE1                     0x00000058
+#define V3_LB_MAP0                      0x0000005E
+#define V3_LB_MAP1                      0x00000062
+#define V3_LB_BASE2                     0x00000064
+#define V3_LB_MAP2                      0x00000066
+#define V3_LB_SIZE                      0x00000068
+#define V3_LB_IO_BASE                   0x0000006E
+#define V3_FIFO_CFG                     0x00000070
+#define V3_FIFO_PRIORITY                0x00000072
+#define V3_FIFO_STAT                    0x00000074
+#define V3_LB_ISTAT                     0x00000076
+#define V3_LB_IMASK                     0x00000077
+#define V3_SYSTEM                       0x00000078
+#define V3_LB_CFG                       0x0000007A
+#define V3_PCI_CFG                      0x0000007C
+#define V3_DMA_PCI_ADR0                 0x00000080
+#define V3_DMA_PCI_ADR1                 0x00000090
+#define V3_DMA_LOCAL_ADR0               0x00000084
+#define V3_DMA_LOCAL_ADR1               0x00000094
+#define V3_DMA_LENGTH0                  0x00000088
+#define V3_DMA_LENGTH1                  0x00000098
+#define V3_DMA_CSR0                     0x0000008B
+#define V3_DMA_CSR1                     0x0000009B
+#define V3_DMA_CTLB_ADR0                0x0000008C
+#define V3_DMA_CTLB_ADR1                0x0000009C
+#define V3_DMA_DELAY                    0x000000E0
+#define V3_MAIL_DATA                    0x000000C0
+#define V3_PCI_MAIL_IEWR                0x000000D0
+#define V3_PCI_MAIL_IERD                0x000000D2
+#define V3_LB_MAIL_IEWR                 0x000000D4
+#define V3_LB_MAIL_IERD                 0x000000D6
+#define V3_MAIL_WR_STAT                 0x000000D8
+#define V3_MAIL_RD_STAT                 0x000000DA
+#define V3_QBA_MAP                      0x000000DC
+
+/*  PCI COMMAND REGISTER bits
+ */
+#define V3_COMMAND_M_FBB_EN             (1 << 9)
+#define V3_COMMAND_M_SERR_EN            (1 << 8)
+#define V3_COMMAND_M_PAR_EN             (1 << 6)
+#define V3_COMMAND_M_MASTER_EN          (1 << 2)
+#define V3_COMMAND_M_MEM_EN             (1 << 1)
+#define V3_COMMAND_M_IO_EN              (1 << 0)
+
+/*  SYSTEM REGISTER bits
+ */
+#define V3_SYSTEM_M_RST_OUT             (1 << 15)
+#define V3_SYSTEM_M_LOCK                (1 << 14)
+
+/*  PCI_CFG bits
+ */
+#define V3_PCI_CFG_M_I2O_EN		(1 << 15)
+#define V3_PCI_CFG_M_IO_REG_DIS		(1 << 14)
+#define V3_PCI_CFG_M_IO_DIS		(1 << 13)
+#define V3_PCI_CFG_M_EN3V		(1 << 12)
+#define V3_PCI_CFG_M_RETRY_EN           (1 << 10)
+#define V3_PCI_CFG_M_AD_LOW1            (1 << 9)
+#define V3_PCI_CFG_M_AD_LOW0            (1 << 8)
+
+/*  PCI_BASE register bits (PCI -> Local Bus)
+ */
+#define V3_PCI_BASE_M_ADR_BASE          0xFFF00000
+#define V3_PCI_BASE_M_ADR_BASEL         0x000FFF00
+#define V3_PCI_BASE_M_PREFETCH          (1 << 3)
+#define V3_PCI_BASE_M_TYPE              (3 << 1)
+#define V3_PCI_BASE_M_IO                (1 << 0)
+
+/*  PCI MAP register bits (PCI -> Local bus)
+ */
+#define V3_PCI_MAP_M_MAP_ADR            0xFFF00000
+#define V3_PCI_MAP_M_RD_POST_INH        (1 << 15)
+#define V3_PCI_MAP_M_ROM_SIZE           (3 << 10)
+#define V3_PCI_MAP_M_SWAP               (3 << 8)
+#define V3_PCI_MAP_M_ADR_SIZE           0x000000F0
+#define V3_PCI_MAP_M_REG_EN             (1 << 1)
+#define V3_PCI_MAP_M_ENABLE             (1 << 0)
+
+/*
+ *  LB_BASE0,1 register bits (Local bus -> PCI)
+ */
+#define V3_LB_BASE_ADR_BASE		0xfff00000
+#define V3_LB_BASE_SWAP			(3 << 8)
+#define V3_LB_BASE_ADR_SIZE		(15 << 4)
+#define V3_LB_BASE_PREFETCH		(1 << 3)
+#define V3_LB_BASE_ENABLE		(1 << 0)
+
+#define V3_LB_BASE_ADR_SIZE_1MB		(0 << 4)
+#define V3_LB_BASE_ADR_SIZE_2MB		(1 << 4)
+#define V3_LB_BASE_ADR_SIZE_4MB		(2 << 4)
+#define V3_LB_BASE_ADR_SIZE_8MB		(3 << 4)
+#define V3_LB_BASE_ADR_SIZE_16MB	(4 << 4)
+#define V3_LB_BASE_ADR_SIZE_32MB	(5 << 4)
+#define V3_LB_BASE_ADR_SIZE_64MB	(6 << 4)
+#define V3_LB_BASE_ADR_SIZE_128MB	(7 << 4)
+#define V3_LB_BASE_ADR_SIZE_256MB	(8 << 4)
+#define V3_LB_BASE_ADR_SIZE_512MB	(9 << 4)
+#define V3_LB_BASE_ADR_SIZE_1GB		(10 << 4)
+#define V3_LB_BASE_ADR_SIZE_2GB		(11 << 4)
+
+#define v3_addr_to_lb_base(a)	((a) & V3_LB_BASE_ADR_BASE)
+
+/*
+ *  LB_MAP0,1 register bits (Local bus -> PCI)
+ */
+#define V3_LB_MAP_MAP_ADR		0xfff0
+#define V3_LB_MAP_TYPE			(7 << 1)
+#define V3_LB_MAP_AD_LOW_EN		(1 << 0)
+
+#define V3_LB_MAP_TYPE_IACK		(0 << 1)
+#define V3_LB_MAP_TYPE_IO		(1 << 1)
+#define V3_LB_MAP_TYPE_MEM		(3 << 1)
+#define V3_LB_MAP_TYPE_CONFIG		(5 << 1)
+#define V3_LB_MAP_TYPE_MEM_MULTIPLE	(6 << 1)
+
+#define v3_addr_to_lb_map(a)	(((a) >> 16) & V3_LB_MAP_MAP_ADR)
+
+/*
+ *  LB_BASE2 register bits (Local bus -> PCI IO)
+ */
+#define V3_LB_BASE2_ADR_BASE		0xff00
+#define V3_LB_BASE2_SWAP		(3 << 6)
+#define V3_LB_BASE2_ENABLE		(1 << 0)
+
+#define v3_addr_to_lb_base2(a)	(((a) >> 16) & V3_LB_BASE2_ADR_BASE)
+
+/*
+ *  LB_MAP2 register bits (Local bus -> PCI IO)
+ */
+#define V3_LB_MAP2_MAP_ADR		0xff00
+
+#define v3_addr_to_lb_map2(a)	(((a) >> 16) & V3_LB_MAP2_MAP_ADR)
+
+#endif
diff --git a/arch/arm/include/asm/hardware/sa1111.h b/arch/arm/include/asm/hardware/sa1111.h
new file mode 100644
index 000000000000..5da2595759e5
--- /dev/null
+++ b/arch/arm/include/asm/hardware/sa1111.h
@@ -0,0 +1,581 @@
+/*
+ * arch/arm/include/asm/hardware/sa1111.h
+ *
+ * Copyright (C) 2000 John G Dorsey <john+@cs.cmu.edu>
+ *
+ * This file contains definitions for the SA-1111 Companion Chip.
+ * (Structure and naming borrowed from SA-1101.h, by Peter Danielsson.)
+ *
+ * Macro that calculates real address for registers in the SA-1111
+ */
+
+#ifndef _ASM_ARCH_SA1111
+#define _ASM_ARCH_SA1111
+
+#include <mach/bitfield.h>
+
+/*
+ * The SA1111 is always located at virtual 0xf4000000, and is always
+ * "native" endian.
+ */
+
+#define SA1111_VBASE		0xf4000000
+
+/* Don't use these! */
+#define SA1111_p2v( x )         ((x) - SA1111_BASE + SA1111_VBASE)
+#define SA1111_v2p( x )         ((x) - SA1111_VBASE + SA1111_BASE)
+
+#ifndef __ASSEMBLY__
+#define _SA1111(x)	((x) + sa1111->resource.start)
+#endif
+
+#define sa1111_writel(val,addr)	__raw_writel(val, addr)
+#define sa1111_readl(addr)	__raw_readl(addr)
+
+/*
+ * 26 bits of the SA-1110 address bus are available to the SA-1111.
+ * Use these when feeding target addresses to the DMA engines.
+ */
+
+#define SA1111_ADDR_WIDTH	(26)
+#define SA1111_ADDR_MASK	((1<<SA1111_ADDR_WIDTH)-1)
+#define SA1111_DMA_ADDR(x)	((x)&SA1111_ADDR_MASK)
+
+/*
+ * Don't ask the (SAC) DMA engines to move less than this amount.
+ */
+
+#define SA1111_SAC_DMA_MIN_XFER	(0x800)
+
+/*
+ * System Bus Interface (SBI)
+ *
+ * Registers
+ *    SKCR	Control Register
+ *    SMCR	Shared Memory Controller Register
+ *    SKID	ID Register
+ */
+#define SA1111_SKCR	0x0000
+#define SA1111_SMCR	0x0004
+#define SA1111_SKID	0x0008
+
+#define SKCR_PLL_BYPASS	(1<<0)
+#define SKCR_RCLKEN	(1<<1)
+#define SKCR_SLEEP	(1<<2)
+#define SKCR_DOZE	(1<<3)
+#define SKCR_VCO_OFF	(1<<4)
+#define SKCR_SCANTSTEN	(1<<5)
+#define SKCR_CLKTSTEN	(1<<6)
+#define SKCR_RDYEN	(1<<7)
+#define SKCR_SELAC	(1<<8)
+#define SKCR_OPPC	(1<<9)
+#define SKCR_PLLTSTEN	(1<<10)
+#define SKCR_USBIOTSTEN	(1<<11)
+/*
+ * Don't believe the specs!  Take them, throw them outside.  Leave them
+ * there for a week.  Spit on them.  Walk on them.  Stamp on them.
+ * Pour gasoline over them and finally burn them.  Now think about coding.
+ *  - The October 1999 errata (278260-007) says its bit 13, 1 to enable.
+ *  - The Feb 2001 errata (278260-010) says that the previous errata
+ *    (278260-009) is wrong, and its bit actually 12, fixed in spec
+ *    278242-003.
+ *  - The SA1111 manual (278242) says bit 12, but 0 to enable.
+ *  - Reality is bit 13, 1 to enable.
+ *      -- rmk
+ */
+#define SKCR_OE_EN	(1<<13)
+
+#define SMCR_DTIM	(1<<0)
+#define SMCR_MBGE	(1<<1)
+#define SMCR_DRAC_0	(1<<2)
+#define SMCR_DRAC_1	(1<<3)
+#define SMCR_DRAC_2	(1<<4)
+#define SMCR_DRAC	Fld(3, 2)
+#define SMCR_CLAT	(1<<5)
+
+#define SKID_SIREV_MASK	(0x000000f0)
+#define SKID_MTREV_MASK (0x0000000f)
+#define SKID_ID_MASK	(0xffffff00)
+#define SKID_SA1111_ID	(0x690cc200)
+
+/*
+ * System Controller
+ *
+ * Registers
+ *    SKPCR	Power Control Register
+ *    SKCDR	Clock Divider Register
+ *    SKAUD	Audio Clock Divider Register
+ *    SKPMC	PS/2 Mouse Clock Divider Register
+ *    SKPTC	PS/2 Track Pad Clock Divider Register
+ *    SKPEN0	PWM0 Enable Register
+ *    SKPWM0	PWM0 Clock Register
+ *    SKPEN1	PWM1 Enable Register
+ *    SKPWM1	PWM1 Clock Register
+ */
+#define SA1111_SKPCR	0x0200
+#define SA1111_SKCDR	0x0204
+#define SA1111_SKAUD	0x0208
+#define SA1111_SKPMC	0x020c
+#define SA1111_SKPTC	0x0210
+#define SA1111_SKPEN0	0x0214
+#define SA1111_SKPWM0	0x0218
+#define SA1111_SKPEN1	0x021c
+#define SA1111_SKPWM1	0x0220
+
+#define SKPCR_UCLKEN	(1<<0)
+#define SKPCR_ACCLKEN	(1<<1)
+#define SKPCR_I2SCLKEN	(1<<2)
+#define SKPCR_L3CLKEN	(1<<3)
+#define SKPCR_SCLKEN	(1<<4)
+#define SKPCR_PMCLKEN	(1<<5)
+#define SKPCR_PTCLKEN	(1<<6)
+#define SKPCR_DCLKEN	(1<<7)
+#define SKPCR_PWMCLKEN	(1<<8)
+
+/*
+ * USB Host controller
+ */
+#define SA1111_USB		0x0400
+
+/*
+ * Offsets from SA1111_USB_BASE
+ */
+#define SA1111_USB_STATUS	0x0118
+#define SA1111_USB_RESET	0x011c
+#define SA1111_USB_IRQTEST	0x0120
+
+#define USB_RESET_FORCEIFRESET	(1 << 0)
+#define USB_RESET_FORCEHCRESET	(1 << 1)
+#define USB_RESET_CLKGENRESET	(1 << 2)
+#define USB_RESET_SIMSCALEDOWN	(1 << 3)
+#define USB_RESET_USBINTTEST	(1 << 4)
+#define USB_RESET_SLEEPSTBYEN	(1 << 5)
+#define USB_RESET_PWRSENSELOW	(1 << 6)
+#define USB_RESET_PWRCTRLLOW	(1 << 7)
+
+#define USB_STATUS_IRQHCIRMTWKUP  (1 <<  7)
+#define USB_STATUS_IRQHCIBUFFACC  (1 <<  8)
+#define USB_STATUS_NIRQHCIM       (1 <<  9)
+#define USB_STATUS_NHCIMFCLR      (1 << 10)
+#define USB_STATUS_USBPWRSENSE    (1 << 11)
+
+/*
+ * Serial Audio Controller
+ *
+ * Registers
+ *    SACR0             Serial Audio Common Control Register
+ *    SACR1             Serial Audio Alternate Mode (I2C/MSB) Control Register
+ *    SACR2             Serial Audio AC-link Control Register
+ *    SASR0             Serial Audio I2S/MSB Interface & FIFO Status Register
+ *    SASR1             Serial Audio AC-link Interface & FIFO Status Register
+ *    SASCR             Serial Audio Status Clear Register
+ *    L3_CAR            L3 Control Bus Address Register
+ *    L3_CDR            L3 Control Bus Data Register
+ *    ACCAR             AC-link Command Address Register
+ *    ACCDR             AC-link Command Data Register
+ *    ACSAR             AC-link Status Address Register
+ *    ACSDR             AC-link Status Data Register
+ *    SADTCS            Serial Audio DMA Transmit Control/Status Register
+ *    SADTSA            Serial Audio DMA Transmit Buffer Start Address A
+ *    SADTCA            Serial Audio DMA Transmit Buffer Count Register A
+ *    SADTSB            Serial Audio DMA Transmit Buffer Start Address B
+ *    SADTCB            Serial Audio DMA Transmit Buffer Count Register B
+ *    SADRCS            Serial Audio DMA Receive Control/Status Register
+ *    SADRSA            Serial Audio DMA Receive Buffer Start Address A
+ *    SADRCA            Serial Audio DMA Receive Buffer Count Register A
+ *    SADRSB            Serial Audio DMA Receive Buffer Start Address B
+ *    SADRCB            Serial Audio DMA Receive Buffer Count Register B
+ *    SAITR             Serial Audio Interrupt Test Register
+ *    SADR              Serial Audio Data Register (16 x 32-bit)
+ */
+
+#define SA1111_SERAUDIO		0x0600
+
+/*
+ * These are offsets from the above base.
+ */
+#define SA1111_SACR0		0x00
+#define SA1111_SACR1		0x04
+#define SA1111_SACR2		0x08
+#define SA1111_SASR0		0x0c
+#define SA1111_SASR1		0x10
+#define SA1111_SASCR		0x18
+#define SA1111_L3_CAR		0x1c
+#define SA1111_L3_CDR		0x20
+#define SA1111_ACCAR		0x24
+#define SA1111_ACCDR		0x28
+#define SA1111_ACSAR		0x2c
+#define SA1111_ACSDR		0x30
+#define SA1111_SADTCS		0x34
+#define SA1111_SADTSA		0x38
+#define SA1111_SADTCA		0x3c
+#define SA1111_SADTSB		0x40
+#define SA1111_SADTCB		0x44
+#define SA1111_SADRCS		0x48
+#define SA1111_SADRSA		0x4c
+#define SA1111_SADRCA		0x50
+#define SA1111_SADRSB		0x54
+#define SA1111_SADRCB		0x58
+#define SA1111_SAITR		0x5c
+#define SA1111_SADR		0x80
+
+#ifndef CONFIG_ARCH_PXA
+
+#define SACR0_ENB	(1<<0)
+#define SACR0_BCKD	(1<<2)
+#define SACR0_RST	(1<<3)
+
+#define SACR1_AMSL	(1<<0)
+#define SACR1_L3EN	(1<<1)
+#define SACR1_L3MB	(1<<2)
+#define SACR1_DREC	(1<<3)
+#define SACR1_DRPL	(1<<4)
+#define SACR1_ENLBF	(1<<5)
+
+#define SACR2_TS3V	(1<<0)
+#define SACR2_TS4V	(1<<1)
+#define SACR2_WKUP	(1<<2)
+#define SACR2_DREC	(1<<3)
+#define SACR2_DRPL	(1<<4)
+#define SACR2_ENLBF	(1<<5)
+#define SACR2_RESET	(1<<6)
+
+#define SASR0_TNF	(1<<0)
+#define SASR0_RNE	(1<<1)
+#define SASR0_BSY	(1<<2)
+#define SASR0_TFS	(1<<3)
+#define SASR0_RFS	(1<<4)
+#define SASR0_TUR	(1<<5)
+#define SASR0_ROR	(1<<6)
+#define SASR0_L3WD	(1<<16)
+#define SASR0_L3RD	(1<<17)
+
+#define SASR1_TNF	(1<<0)
+#define SASR1_RNE	(1<<1)
+#define SASR1_BSY	(1<<2)
+#define SASR1_TFS	(1<<3)
+#define SASR1_RFS	(1<<4)
+#define SASR1_TUR	(1<<5)
+#define SASR1_ROR	(1<<6)
+#define SASR1_CADT	(1<<16)
+#define SASR1_SADR	(1<<17)
+#define SASR1_RSTO	(1<<18)
+#define SASR1_CLPM	(1<<19)
+#define SASR1_CRDY	(1<<20)
+#define SASR1_RS3V	(1<<21)
+#define SASR1_RS4V	(1<<22)
+
+#define SASCR_TUR	(1<<5)
+#define SASCR_ROR	(1<<6)
+#define SASCR_DTS	(1<<16)
+#define SASCR_RDD	(1<<17)
+#define SASCR_STO	(1<<18)
+
+#define SADTCS_TDEN	(1<<0)
+#define SADTCS_TDIE	(1<<1)
+#define SADTCS_TDBDA	(1<<3)
+#define SADTCS_TDSTA	(1<<4)
+#define SADTCS_TDBDB	(1<<5)
+#define SADTCS_TDSTB	(1<<6)
+#define SADTCS_TBIU	(1<<7)
+
+#define SADRCS_RDEN	(1<<0)
+#define SADRCS_RDIE	(1<<1)
+#define SADRCS_RDBDA	(1<<3)
+#define SADRCS_RDSTA	(1<<4)
+#define SADRCS_RDBDB	(1<<5)
+#define SADRCS_RDSTB	(1<<6)
+#define SADRCS_RBIU	(1<<7)
+
+#define SAD_CS_DEN	(1<<0)
+#define SAD_CS_DIE	(1<<1)	/* Not functional on metal 1 */
+#define SAD_CS_DBDA	(1<<3)	/* Not functional on metal 1 */
+#define SAD_CS_DSTA	(1<<4)
+#define SAD_CS_DBDB	(1<<5)	/* Not functional on metal 1 */
+#define SAD_CS_DSTB	(1<<6)
+#define SAD_CS_BIU	(1<<7)	/* Not functional on metal 1 */
+
+#define SAITR_TFS	(1<<0)
+#define SAITR_RFS	(1<<1)
+#define SAITR_TUR	(1<<2)
+#define SAITR_ROR	(1<<3)
+#define SAITR_CADT	(1<<4)
+#define SAITR_SADR	(1<<5)
+#define SAITR_RSTO	(1<<6)
+#define SAITR_TDBDA	(1<<8)
+#define SAITR_TDBDB	(1<<9)
+#define SAITR_RDBDA	(1<<10)
+#define SAITR_RDBDB	(1<<11)
+
+#endif  /* !CONFIG_ARCH_PXA */
+
+/*
+ * General-Purpose I/O Interface
+ *
+ * Registers
+ *    PA_DDR		GPIO Block A Data Direction
+ *    PA_DRR/PA_DWR	GPIO Block A Data Value Register (read/write)
+ *    PA_SDR		GPIO Block A Sleep Direction
+ *    PA_SSR		GPIO Block A Sleep State
+ *    PB_DDR		GPIO Block B Data Direction
+ *    PB_DRR/PB_DWR	GPIO Block B Data Value Register (read/write)
+ *    PB_SDR		GPIO Block B Sleep Direction
+ *    PB_SSR		GPIO Block B Sleep State
+ *    PC_DDR		GPIO Block C Data Direction
+ *    PC_DRR/PC_DWR	GPIO Block C Data Value Register (read/write)
+ *    PC_SDR		GPIO Block C Sleep Direction
+ *    PC_SSR		GPIO Block C Sleep State
+ */
+
+#define _PA_DDR		_SA1111( 0x1000 )
+#define _PA_DRR		_SA1111( 0x1004 )
+#define _PA_DWR		_SA1111( 0x1004 )
+#define _PA_SDR		_SA1111( 0x1008 )
+#define _PA_SSR		_SA1111( 0x100c )
+#define _PB_DDR		_SA1111( 0x1010 )
+#define _PB_DRR		_SA1111( 0x1014 )
+#define _PB_DWR		_SA1111( 0x1014 )
+#define _PB_SDR		_SA1111( 0x1018 )
+#define _PB_SSR		_SA1111( 0x101c )
+#define _PC_DDR		_SA1111( 0x1020 )
+#define _PC_DRR		_SA1111( 0x1024 )
+#define _PC_DWR		_SA1111( 0x1024 )
+#define _PC_SDR		_SA1111( 0x1028 )
+#define _PC_SSR		_SA1111( 0x102c )
+
+#define SA1111_GPIO	0x1000
+
+#define SA1111_GPIO_PADDR	(0x000)
+#define SA1111_GPIO_PADRR	(0x004)
+#define SA1111_GPIO_PADWR	(0x004)
+#define SA1111_GPIO_PASDR	(0x008)
+#define SA1111_GPIO_PASSR	(0x00c)
+#define SA1111_GPIO_PBDDR	(0x010)
+#define SA1111_GPIO_PBDRR	(0x014)
+#define SA1111_GPIO_PBDWR	(0x014)
+#define SA1111_GPIO_PBSDR	(0x018)
+#define SA1111_GPIO_PBSSR	(0x01c)
+#define SA1111_GPIO_PCDDR	(0x020)
+#define SA1111_GPIO_PCDRR	(0x024)
+#define SA1111_GPIO_PCDWR	(0x024)
+#define SA1111_GPIO_PCSDR	(0x028)
+#define SA1111_GPIO_PCSSR	(0x02c)
+
+#define GPIO_A0		(1 << 0)
+#define GPIO_A1		(1 << 1)
+#define GPIO_A2		(1 << 2)
+#define GPIO_A3		(1 << 3)
+
+#define GPIO_B0		(1 << 8)
+#define GPIO_B1		(1 << 9)
+#define GPIO_B2		(1 << 10)
+#define GPIO_B3		(1 << 11)
+#define GPIO_B4		(1 << 12)
+#define GPIO_B5		(1 << 13)
+#define GPIO_B6		(1 << 14)
+#define GPIO_B7		(1 << 15)
+
+#define GPIO_C0		(1 << 16)
+#define GPIO_C1		(1 << 17)
+#define GPIO_C2		(1 << 18)
+#define GPIO_C3		(1 << 19)
+#define GPIO_C4		(1 << 20)
+#define GPIO_C5		(1 << 21)
+#define GPIO_C6		(1 << 22)
+#define GPIO_C7		(1 << 23)
+
+/*
+ * Interrupt Controller
+ *
+ * Registers
+ *    INTTEST0		Test register 0
+ *    INTTEST1		Test register 1
+ *    INTEN0		Interrupt Enable register 0
+ *    INTEN1		Interrupt Enable register 1
+ *    INTPOL0		Interrupt Polarity selection 0
+ *    INTPOL1		Interrupt Polarity selection 1
+ *    INTTSTSEL		Interrupt source selection
+ *    INTSTATCLR0	Interrupt Status/Clear 0
+ *    INTSTATCLR1	Interrupt Status/Clear 1
+ *    INTSET0		Interrupt source set 0
+ *    INTSET1		Interrupt source set 1
+ *    WAKE_EN0		Wake-up source enable 0
+ *    WAKE_EN1		Wake-up source enable 1
+ *    WAKE_POL0		Wake-up polarity selection 0
+ *    WAKE_POL1		Wake-up polarity selection 1
+ */
+#define SA1111_INTC		0x1600
+
+/*
+ * These are offsets from the above base.
+ */
+#define SA1111_INTTEST0		0x0000
+#define SA1111_INTTEST1		0x0004
+#define SA1111_INTEN0		0x0008
+#define SA1111_INTEN1		0x000c
+#define SA1111_INTPOL0		0x0010
+#define SA1111_INTPOL1		0x0014
+#define SA1111_INTTSTSEL	0x0018
+#define SA1111_INTSTATCLR0	0x001c
+#define SA1111_INTSTATCLR1	0x0020
+#define SA1111_INTSET0		0x0024
+#define SA1111_INTSET1		0x0028
+#define SA1111_WAKEEN0		0x002c
+#define SA1111_WAKEEN1		0x0030
+#define SA1111_WAKEPOL0		0x0034
+#define SA1111_WAKEPOL1		0x0038
+
+/*
+ * PS/2 Trackpad and Mouse Interfaces
+ *
+ * Registers
+ *    PS2CR		Control Register
+ *    PS2STAT		Status Register
+ *    PS2DATA		Transmit/Receive Data register
+ *    PS2CLKDIV		Clock Division Register
+ *    PS2PRECNT		Clock Precount Register
+ *    PS2TEST1		Test register 1
+ *    PS2TEST2		Test register 2
+ *    PS2TEST3		Test register 3
+ *    PS2TEST4		Test register 4
+ */
+
+#define SA1111_KBD		0x0a00
+#define SA1111_MSE		0x0c00
+
+/*
+ * These are offsets from the above bases.
+ */
+#define SA1111_PS2CR		0x0000
+#define SA1111_PS2STAT		0x0004
+#define SA1111_PS2DATA		0x0008
+#define SA1111_PS2CLKDIV	0x000c
+#define SA1111_PS2PRECNT	0x0010
+
+#define PS2CR_ENA		0x08
+#define PS2CR_FKD		0x02
+#define PS2CR_FKC		0x01
+
+#define PS2STAT_STP		0x0100
+#define PS2STAT_TXE		0x0080
+#define PS2STAT_TXB		0x0040
+#define PS2STAT_RXF		0x0020
+#define PS2STAT_RXB		0x0010
+#define PS2STAT_ENA		0x0008
+#define PS2STAT_RXP		0x0004
+#define PS2STAT_KBD		0x0002
+#define PS2STAT_KBC		0x0001
+
+/*
+ * PCMCIA Interface
+ *
+ * Registers
+ *    PCSR	Status Register
+ *    PCCR	Control Register
+ *    PCSSR	Sleep State Register
+ */
+
+#define SA1111_PCMCIA	0x1600
+
+/*
+ * These are offsets from the above base.
+ */
+#define SA1111_PCCR	0x0000
+#define SA1111_PCSSR	0x0004
+#define SA1111_PCSR	0x0008
+
+#define PCSR_S0_READY	(1<<0)
+#define PCSR_S1_READY	(1<<1)
+#define PCSR_S0_DETECT	(1<<2)
+#define PCSR_S1_DETECT	(1<<3)
+#define PCSR_S0_VS1	(1<<4)
+#define PCSR_S0_VS2	(1<<5)
+#define PCSR_S1_VS1	(1<<6)
+#define PCSR_S1_VS2	(1<<7)
+#define PCSR_S0_WP	(1<<8)
+#define PCSR_S1_WP	(1<<9)
+#define PCSR_S0_BVD1	(1<<10)
+#define PCSR_S0_BVD2	(1<<11)
+#define PCSR_S1_BVD1	(1<<12)
+#define PCSR_S1_BVD2	(1<<13)
+
+#define PCCR_S0_RST	(1<<0)
+#define PCCR_S1_RST	(1<<1)
+#define PCCR_S0_FLT	(1<<2)
+#define PCCR_S1_FLT	(1<<3)
+#define PCCR_S0_PWAITEN	(1<<4)
+#define PCCR_S1_PWAITEN	(1<<5)
+#define PCCR_S0_PSE	(1<<6)
+#define PCCR_S1_PSE	(1<<7)
+
+#define PCSSR_S0_SLEEP	(1<<0)
+#define PCSSR_S1_SLEEP	(1<<1)
+
+
+
+
+extern struct bus_type sa1111_bus_type;
+
+#define SA1111_DEVID_SBI	0
+#define SA1111_DEVID_SK		1
+#define SA1111_DEVID_USB	2
+#define SA1111_DEVID_SAC	3
+#define SA1111_DEVID_SSP	4
+#define SA1111_DEVID_PS2	5
+#define SA1111_DEVID_GPIO	6
+#define SA1111_DEVID_INT	7
+#define SA1111_DEVID_PCMCIA	8
+
+struct sa1111_dev {
+	struct device	dev;
+	unsigned int	devid;
+	struct resource	res;
+	void __iomem	*mapbase;
+	unsigned int	skpcr_mask;
+	unsigned int	irq[6];
+	u64		dma_mask;
+};
+
+#define SA1111_DEV(_d)	container_of((_d), struct sa1111_dev, dev)
+
+#define sa1111_get_drvdata(d)	dev_get_drvdata(&(d)->dev)
+#define sa1111_set_drvdata(d,p)	dev_set_drvdata(&(d)->dev, p)
+
+struct sa1111_driver {
+	struct device_driver	drv;
+	unsigned int		devid;
+	int (*probe)(struct sa1111_dev *);
+	int (*remove)(struct sa1111_dev *);
+	int (*suspend)(struct sa1111_dev *, pm_message_t);
+	int (*resume)(struct sa1111_dev *);
+};
+
+#define SA1111_DRV(_d)	container_of((_d), struct sa1111_driver, drv)
+
+#define SA1111_DRIVER_NAME(_sadev) ((_sadev)->dev.driver->name)
+
+/*
+ * These frob the SKPCR register.
+ */
+void sa1111_enable_device(struct sa1111_dev *);
+void sa1111_disable_device(struct sa1111_dev *);
+
+unsigned int sa1111_pll_clock(struct sa1111_dev *);
+
+#define SA1111_AUDIO_ACLINK	0
+#define SA1111_AUDIO_I2S	1
+
+void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode);
+int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate);
+int sa1111_get_audio_rate(struct sa1111_dev *sadev);
+
+int sa1111_check_dma_bug(dma_addr_t addr);
+
+int sa1111_driver_register(struct sa1111_driver *);
+void sa1111_driver_unregister(struct sa1111_driver *);
+
+void sa1111_set_io_dir(struct sa1111_dev *sadev, unsigned int bits, unsigned int dir, unsigned int sleep_dir);
+void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
+void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v);
+
+#endif  /* _ASM_ARCH_SA1111 */
diff --git a/arch/arm/include/asm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h
new file mode 100644
index 000000000000..dfb8330599f9
--- /dev/null
+++ b/arch/arm/include/asm/hardware/scoop.h
@@ -0,0 +1,69 @@
+/*
+ *  Definitions for the SCOOP interface found on various Sharp PDAs
+ *
+ *  Copyright (c) 2004 Richard Purdie
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#define SCOOP_MCR  0x00
+#define SCOOP_CDR  0x04
+#define SCOOP_CSR  0x08
+#define SCOOP_CPR  0x0C
+#define SCOOP_CCR  0x10
+#define SCOOP_IRR  0x14
+#define SCOOP_IRM  0x14
+#define SCOOP_IMR  0x18
+#define SCOOP_ISR  0x1C
+#define SCOOP_GPCR 0x20
+#define SCOOP_GPWR 0x24
+#define SCOOP_GPRR 0x28
+
+#define SCOOP_GPCR_PA22	( 1 << 12 )
+#define SCOOP_GPCR_PA21	( 1 << 11 )
+#define SCOOP_GPCR_PA20	( 1 << 10 )
+#define SCOOP_GPCR_PA19	( 1 << 9 )
+#define SCOOP_GPCR_PA18	( 1 << 8 )
+#define SCOOP_GPCR_PA17	( 1 << 7 )
+#define SCOOP_GPCR_PA16	( 1 << 6 )
+#define SCOOP_GPCR_PA15	( 1 << 5 )
+#define SCOOP_GPCR_PA14	( 1 << 4 )
+#define SCOOP_GPCR_PA13	( 1 << 3 )
+#define SCOOP_GPCR_PA12	( 1 << 2 )
+#define SCOOP_GPCR_PA11	( 1 << 1 )
+
+struct scoop_config {
+	unsigned short io_out;
+	unsigned short io_dir;
+	unsigned short suspend_clr;
+	unsigned short suspend_set;
+	int gpio_base;
+};
+
+/* Structure for linking scoop devices to PCMCIA sockets */
+struct scoop_pcmcia_dev {
+	struct device *dev;     /* Pointer to this socket's scoop device */
+	int	irq;                /* irq for socket */
+	int cd_irq;
+	const char *cd_irq_str;
+	unsigned char keep_vs;
+	unsigned char keep_rd;
+};
+
+struct scoop_pcmcia_config {
+	struct scoop_pcmcia_dev *devs;
+	int num_devs;
+	void (*pcmcia_init)(void);
+	void (*power_ctrl)(struct device *scoop, unsigned short cpr, int nr);
+};
+
+extern struct scoop_pcmcia_config *platform_scoop_config;
+
+void reset_scoop(struct device *dev);
+unsigned short __deprecated set_scoop_gpio(struct device *dev, unsigned short bit);
+unsigned short __deprecated reset_scoop_gpio(struct device *dev, unsigned short bit);
+unsigned short read_scoop_reg(struct device *dev, unsigned short reg);
+void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data);
diff --git a/arch/arm/include/asm/hardware/sharpsl_pm.h b/arch/arm/include/asm/hardware/sharpsl_pm.h
new file mode 100644
index 000000000000..2d00db22b981
--- /dev/null
+++ b/arch/arm/include/asm/hardware/sharpsl_pm.h
@@ -0,0 +1,106 @@
+/*
+ * SharpSL Battery/PM Driver
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/interrupt.h>
+
+struct sharpsl_charger_machinfo {
+	void (*init)(void);
+	void (*exit)(void);
+	int gpio_acin;
+	int gpio_batfull;
+	int batfull_irq;
+	int gpio_batlock;
+	int gpio_fatal;
+	void (*discharge)(int);
+	void (*discharge1)(int);
+	void (*charge)(int);
+	void (*measure_temp)(int);
+	void (*presuspend)(void);
+	void (*postsuspend)(void);
+	void (*earlyresume)(void);
+	unsigned long (*read_devdata)(int);
+#define SHARPSL_BATT_VOLT       1
+#define SHARPSL_BATT_TEMP       2
+#define SHARPSL_ACIN_VOLT       3
+#define SHARPSL_STATUS_ACIN     4
+#define SHARPSL_STATUS_LOCK     5
+#define SHARPSL_STATUS_CHRGFULL 6
+#define SHARPSL_STATUS_FATAL    7
+	unsigned long (*charger_wakeup)(void);
+	int (*should_wakeup)(unsigned int resume_on_alarm);
+	void (*backlight_limit)(int);
+	int (*backlight_get_status) (void);
+	int charge_on_volt;
+	int charge_on_temp;
+	int charge_acin_high;
+	int charge_acin_low;
+	int fatal_acin_volt;
+	int fatal_noacin_volt;
+	int bat_levels;
+	struct battery_thresh *bat_levels_noac;
+	struct battery_thresh *bat_levels_acin;
+	struct battery_thresh *bat_levels_noac_bl;
+	struct battery_thresh *bat_levels_acin_bl;
+	int status_high_acin;
+	int status_low_acin;
+	int status_high_noac;
+	int status_low_noac;
+};
+
+struct battery_thresh {
+	int voltage;
+	int percentage;
+};
+
+struct battery_stat {
+	int ac_status;         /* APM AC Present/Not Present */
+	int mainbat_status;    /* APM Main Battery Status */
+	int mainbat_percent;   /* Main Battery Percentage Charge */
+	int mainbat_voltage;   /* Main Battery Voltage */
+};
+
+struct sharpsl_pm_status {
+	struct device *dev;
+	struct timer_list ac_timer;
+	struct timer_list chrg_full_timer;
+
+	int charge_mode;
+#define CHRG_ERROR    (-1)
+#define CHRG_OFF      (0)
+#define CHRG_ON       (1)
+#define CHRG_DONE     (2)
+
+	unsigned int flags;
+#define SHARPSL_SUSPENDED       (1 << 0)  /* Device is Suspended */
+#define SHARPSL_ALARM_ACTIVE    (1 << 1)  /* Alarm is for charging event (not user) */
+#define SHARPSL_BL_LIMIT        (1 << 2)  /* Backlight Intensity Limited */
+#define SHARPSL_APM_QUEUED      (1 << 3)  /* APM Event Queued */
+#define SHARPSL_DO_OFFLINE_CHRG (1 << 4)  /* Trigger the offline charger */
+
+	int full_count;
+	unsigned long charge_start_time;
+	struct sharpsl_charger_machinfo *machinfo;
+	struct battery_stat battstat;
+};
+
+extern struct sharpsl_pm_status sharpsl_pm;
+
+
+#define SHARPSL_LED_ERROR  2
+#define SHARPSL_LED_ON     1
+#define SHARPSL_LED_OFF    0
+
+void sharpsl_battery_kick(void);
+void sharpsl_pm_led(int val);
+irqreturn_t sharpsl_ac_isr(int irq, void *dev_id);
+irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id);
+irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id);
+
diff --git a/arch/arm/include/asm/hardware/ssp.h b/arch/arm/include/asm/hardware/ssp.h
new file mode 100644
index 000000000000..3b42e181997c
--- /dev/null
+++ b/arch/arm/include/asm/hardware/ssp.h
@@ -0,0 +1,28 @@
+/*
+ *  ssp.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef SSP_H
+#define SSP_H
+
+struct ssp_state {
+	unsigned int	cr0;
+	unsigned int	cr1;
+};
+
+int ssp_write_word(u16 data);
+int ssp_read_word(u16 *data);
+int ssp_flush(void);
+void ssp_enable(void);
+void ssp_disable(void);
+void ssp_save_state(struct ssp_state *ssp);
+void ssp_restore_state(struct ssp_state *ssp);
+int ssp_init(void);
+void ssp_exit(void);
+
+#endif
diff --git a/arch/arm/include/asm/hardware/uengine.h b/arch/arm/include/asm/hardware/uengine.h
new file mode 100644
index 000000000000..b442d65c6593
--- /dev/null
+++ b/arch/arm/include/asm/hardware/uengine.h
@@ -0,0 +1,62 @@
+/*
+ * Generic library functions for the microengines found on the Intel
+ * IXP2000 series of network processors.
+ *
+ * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
+ * Dedicated to Marija Kulikova.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2.1 of the
+ * License, or (at your option) any later version.
+ */
+
+#ifndef __IXP2000_UENGINE_H
+#define __IXP2000_UENGINE_H
+
+extern u32 ixp2000_uengine_mask;
+
+struct ixp2000_uengine_code
+{
+	u32	cpu_model_bitmask;
+	u8	cpu_min_revision;
+	u8	cpu_max_revision;
+
+	u32	uengine_parameters;
+
+	struct ixp2000_reg_value {
+		int	reg;
+		u32	value;
+	} *initial_reg_values;
+
+	int	num_insns;
+	u8	*insns;
+};
+
+u32 ixp2000_uengine_csr_read(int uengine, int offset);
+void ixp2000_uengine_csr_write(int uengine, int offset, u32 value);
+void ixp2000_uengine_reset(u32 uengine_mask);
+void ixp2000_uengine_set_mode(int uengine, u32 mode);
+void ixp2000_uengine_load_microcode(int uengine, u8 *ucode, int insns);
+void ixp2000_uengine_init_context(int uengine, int context, int pc);
+void ixp2000_uengine_start_contexts(int uengine, u8 ctx_mask);
+void ixp2000_uengine_stop_contexts(int uengine, u8 ctx_mask);
+int ixp2000_uengine_load(int uengine, struct ixp2000_uengine_code *c);
+
+#define IXP2000_UENGINE_8_CONTEXTS		0x00000000
+#define IXP2000_UENGINE_4_CONTEXTS		0x80000000
+#define IXP2000_UENGINE_PRN_UPDATE_EVERY	0x40000000
+#define IXP2000_UENGINE_PRN_UPDATE_ON_ACCESS	0x00000000
+#define IXP2000_UENGINE_NN_FROM_SELF		0x00100000
+#define IXP2000_UENGINE_NN_FROM_PREVIOUS	0x00000000
+#define IXP2000_UENGINE_ASSERT_EMPTY_AT_3	0x000c0000
+#define IXP2000_UENGINE_ASSERT_EMPTY_AT_2	0x00080000
+#define IXP2000_UENGINE_ASSERT_EMPTY_AT_1	0x00040000
+#define IXP2000_UENGINE_ASSERT_EMPTY_AT_0	0x00000000
+#define IXP2000_UENGINE_LM_ADDR1_GLOBAL		0x00020000
+#define IXP2000_UENGINE_LM_ADDR1_PER_CONTEXT	0x00000000
+#define IXP2000_UENGINE_LM_ADDR0_GLOBAL		0x00010000
+#define IXP2000_UENGINE_LM_ADDR0_PER_CONTEXT	0x00000000
+
+
+#endif
diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h
new file mode 100644
index 000000000000..263f2c362a30
--- /dev/null
+++ b/arch/arm/include/asm/hardware/vic.h
@@ -0,0 +1,45 @@
+/*
+ *  arch/arm/include/asm/hardware/vic.h
+ *
+ *  Copyright (c) ARM Limited 2003.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_HARDWARE_VIC_H
+#define __ASM_ARM_HARDWARE_VIC_H
+
+#define VIC_IRQ_STATUS			0x00
+#define VIC_FIQ_STATUS			0x04
+#define VIC_RAW_STATUS			0x08
+#define VIC_INT_SELECT			0x0c	/* 1 = FIQ, 0 = IRQ */
+#define VIC_INT_ENABLE			0x10	/* 1 = enable, 0 = disable */
+#define VIC_INT_ENABLE_CLEAR		0x14
+#define VIC_INT_SOFT			0x18
+#define VIC_INT_SOFT_CLEAR		0x1c
+#define VIC_PROTECT			0x20
+#define VIC_VECT_ADDR			0x30
+#define VIC_DEF_VECT_ADDR		0x34
+
+#define VIC_VECT_ADDR0			0x100	/* 0 to 15 */
+#define VIC_VECT_CNTL0			0x200	/* 0 to 15 */
+#define VIC_ITCR			0x300	/* VIC test control register */
+
+#define VIC_VECT_CNTL_ENABLE		(1 << 5)
+
+#ifndef __ASSEMBLY__
+void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/hw_irq.h b/arch/arm/include/asm/hw_irq.h
new file mode 100644
index 000000000000..90831f6f5f5c
--- /dev/null
+++ b/arch/arm/include/asm/hw_irq.h
@@ -0,0 +1,27 @@
+/*
+ * Nothing to see here yet
+ */
+#ifndef _ARCH_ARM_HW_IRQ_H
+#define _ARCH_ARM_HW_IRQ_H
+
+static inline void ack_bad_irq(int irq)
+{
+	extern unsigned long irq_err_count;
+	irq_err_count++;
+}
+
+/*
+ * Obsolete inline function for calling irq descriptor handlers.
+ */
+static inline void desc_handle_irq(unsigned int irq, struct irq_desc *desc)
+{
+	desc->handle_irq(irq, desc);
+}
+
+void set_irq_flags(unsigned int irq, unsigned int flags);
+
+#define IRQF_VALID	(1 << 0)
+#define IRQF_PROBE	(1 << 1)
+#define IRQF_NOAUTOEN	(1 << 2)
+
+#endif
diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h
new file mode 100644
index 000000000000..81f4c899a555
--- /dev/null
+++ b/arch/arm/include/asm/hwcap.h
@@ -0,0 +1,29 @@
+#ifndef __ASMARM_HWCAP_H
+#define __ASMARM_HWCAP_H
+
+/*
+ * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
+ */
+#define HWCAP_SWP	1
+#define HWCAP_HALF	2
+#define HWCAP_THUMB	4
+#define HWCAP_26BIT	8	/* Play it safe */
+#define HWCAP_FAST_MULT	16
+#define HWCAP_FPA	32
+#define HWCAP_VFP	64
+#define HWCAP_EDSP	128
+#define HWCAP_JAVA	256
+#define HWCAP_IWMMXT	512
+#define HWCAP_CRUNCH	1024
+#define HWCAP_THUMBEE	2048
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+/*
+ * This yields a mask that user programs can use to figure out what
+ * instruction set this cpu supports.
+ */
+#define ELF_HWCAP	(elf_hwcap)
+extern unsigned int elf_hwcap;
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/ide.h b/arch/arm/include/asm/ide.h
new file mode 100644
index 000000000000..b507ce8e5019
--- /dev/null
+++ b/arch/arm/include/asm/ide.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/include/asm/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+/*
+ *  This file contains the ARM architecture specific IDE code.
+ */
+
+#ifndef __ASMARM_IDE_H
+#define __ASMARM_IDE_H
+
+#ifdef __KERNEL__
+
+#define __ide_mm_insw(port,addr,len)	readsw(port,addr,len)
+#define __ide_mm_insl(port,addr,len)	readsl(port,addr,len)
+#define __ide_mm_outsw(port,addr,len)	writesw(port,addr,len)
+#define __ide_mm_outsl(port,addr,len)	writesl(port,addr,len)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASMARM_IDE_H */
diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
new file mode 100644
index 000000000000..94a95d7fafd6
--- /dev/null
+++ b/arch/arm/include/asm/io.h
@@ -0,0 +1,287 @@
+/*
+ *  arch/arm/include/asm/io.h
+ *
+ *  Copyright (C) 1996-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  16-Sep-1996	RMK	Inlined the inx/outx functions & optimised for both
+ *			constant addresses and variable addresses.
+ *  04-Dec-1997	RMK	Moved a lot of this stuff to the new architecture
+ *			specific IO header files.
+ *  27-Mar-1999	PJB	Second parameter of memcpy_toio is const..
+ *  04-Apr-1999	PJB	Added check_signature.
+ *  12-Dec-1999	RMK	More cleanups
+ *  18-Jun-2000 RMK	Removed virt_to_* and friends definitions
+ *  05-Oct-2004 BJD     Moved memory string functions to use void __iomem
+ */
+#ifndef __ASM_ARM_IO_H
+#define __ASM_ARM_IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <asm/memory.h>
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+#define isa_virt_to_bus virt_to_phys
+#define isa_page_to_bus page_to_phys
+#define isa_bus_to_virt phys_to_virt
+
+/*
+ * Generic IO read/write.  These perform native-endian accesses.  Note
+ * that some architectures will want to re-define __raw_{read,write}w.
+ */
+extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen);
+extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
+extern void __raw_writesl(void __iomem *addr, const void *data, int longlen);
+
+extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
+extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
+extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
+
+#define __raw_writeb(v,a)	(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a) = (v))
+#define __raw_writew(v,a)	(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v))
+#define __raw_writel(v,a)	(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a) = (v))
+
+#define __raw_readb(a)		(__chk_io_ptr(a), *(volatile unsigned char __force  *)(a))
+#define __raw_readw(a)		(__chk_io_ptr(a), *(volatile unsigned short __force *)(a))
+#define __raw_readl(a)		(__chk_io_ptr(a), *(volatile unsigned int __force   *)(a))
+
+/*
+ * Architecture ioremap implementation.
+ */
+#define MT_DEVICE		0
+#define MT_DEVICE_NONSHARED	1
+#define MT_DEVICE_CACHED	2
+#define MT_DEVICE_IXP2000	3
+/*
+ * types 4 onwards can be found in asm/mach/map.h and are undefined
+ * for ioremap
+ */
+
+/*
+ * __arm_ioremap takes CPU physical address.
+ * __arm_ioremap_pfn takes a Page Frame Number and an offset into that page
+ */
+extern void __iomem * __arm_ioremap_pfn(unsigned long, unsigned long, size_t, unsigned int);
+extern void __iomem * __arm_ioremap(unsigned long, size_t, unsigned int);
+extern void __iounmap(volatile void __iomem *addr);
+
+/*
+ * Bad read/write accesses...
+ */
+extern void __readwrite_bug(const char *fn);
+
+/*
+ * Now, pick up the machine-defined IO definitions
+ */
+#include <mach/io.h>
+
+/*
+ *  IO port access primitives
+ *  -------------------------
+ *
+ * The ARM doesn't have special IO access instructions; all IO is memory
+ * mapped.  Note that these are defined to perform little endian accesses
+ * only.  Their primary purpose is to access PCI and ISA peripherals.
+ *
+ * Note that for a big endian machine, this implies that the following
+ * big endian mode connectivity is in place, as described by numerous
+ * ARM documents:
+ *
+ *    PCI:  D0-D7   D8-D15 D16-D23 D24-D31
+ *    ARM: D24-D31 D16-D23  D8-D15  D0-D7
+ *
+ * The machine specific io.h include defines __io to translate an "IO"
+ * address to a memory address.
+ *
+ * Note that we prevent GCC re-ordering or caching values in expressions
+ * by introducing sequence points into the in*() definitions.  Note that
+ * __raw_* do not guarantee this behaviour.
+ *
+ * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
+ */
+#ifdef __io
+#define outb(v,p)		__raw_writeb(v,__io(p))
+#define outw(v,p)		__raw_writew((__force __u16) \
+					cpu_to_le16(v),__io(p))
+#define outl(v,p)		__raw_writel((__force __u32) \
+					cpu_to_le32(v),__io(p))
+
+#define inb(p)	({ __u8 __v = __raw_readb(__io(p)); __v; })
+#define inw(p)	({ __u16 __v = le16_to_cpu((__force __le16) \
+			__raw_readw(__io(p))); __v; })
+#define inl(p)	({ __u32 __v = le32_to_cpu((__force __le32) \
+			__raw_readl(__io(p))); __v; })
+
+#define outsb(p,d,l)		__raw_writesb(__io(p),d,l)
+#define outsw(p,d,l)		__raw_writesw(__io(p),d,l)
+#define outsl(p,d,l)		__raw_writesl(__io(p),d,l)
+
+#define insb(p,d,l)		__raw_readsb(__io(p),d,l)
+#define insw(p,d,l)		__raw_readsw(__io(p),d,l)
+#define insl(p,d,l)		__raw_readsl(__io(p),d,l)
+#endif
+
+#define outb_p(val,port)	outb((val),(port))
+#define outw_p(val,port)	outw((val),(port))
+#define outl_p(val,port)	outl((val),(port))
+#define inb_p(port)		inb((port))
+#define inw_p(port)		inw((port))
+#define inl_p(port)		inl((port))
+
+#define outsb_p(port,from,len)	outsb(port,from,len)
+#define outsw_p(port,from,len)	outsw(port,from,len)
+#define outsl_p(port,from,len)	outsl(port,from,len)
+#define insb_p(port,to,len)	insb(port,to,len)
+#define insw_p(port,to,len)	insw(port,to,len)
+#define insl_p(port,to,len)	insl(port,to,len)
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void _memcpy_fromio(void *, const volatile void __iomem *, size_t);
+extern void _memcpy_toio(volatile void __iomem *, const void *, size_t);
+extern void _memset_io(volatile void __iomem *, int, size_t);
+
+#define mmiowb()
+
+/*
+ *  Memory access primitives
+ *  ------------------------
+ *
+ * These perform PCI memory accesses via an ioremap region.  They don't
+ * take an address as such, but a cookie.
+ *
+ * Again, this are defined to perform little endian accesses.  See the
+ * IO port primitives for more information.
+ */
+#ifdef __mem_pci
+#define readb(c) ({ __u8  __v = __raw_readb(__mem_pci(c)); __v; })
+#define readw(c) ({ __u16 __v = le16_to_cpu((__force __le16) \
+					__raw_readw(__mem_pci(c))); __v; })
+#define readl(c) ({ __u32 __v = le32_to_cpu((__force __le32) \
+					__raw_readl(__mem_pci(c))); __v; })
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define readsb(p,d,l)		__raw_readsb(__mem_pci(p),d,l)
+#define readsw(p,d,l)		__raw_readsw(__mem_pci(p),d,l)
+#define readsl(p,d,l)		__raw_readsl(__mem_pci(p),d,l)
+
+#define writeb(v,c)		__raw_writeb(v,__mem_pci(c))
+#define writew(v,c)		__raw_writew((__force __u16) \
+					cpu_to_le16(v),__mem_pci(c))
+#define writel(v,c)		__raw_writel((__force __u32) \
+					cpu_to_le32(v),__mem_pci(c))
+
+#define writesb(p,d,l)		__raw_writesb(__mem_pci(p),d,l)
+#define writesw(p,d,l)		__raw_writesw(__mem_pci(p),d,l)
+#define writesl(p,d,l)		__raw_writesl(__mem_pci(p),d,l)
+
+#define memset_io(c,v,l)	_memset_io(__mem_pci(c),(v),(l))
+#define memcpy_fromio(a,c,l)	_memcpy_fromio((a),__mem_pci(c),(l))
+#define memcpy_toio(c,a,l)	_memcpy_toio(__mem_pci(c),(a),(l))
+
+#elif !defined(readb)
+
+#define readb(c)			(__readwrite_bug("readb"),0)
+#define readw(c)			(__readwrite_bug("readw"),0)
+#define readl(c)			(__readwrite_bug("readl"),0)
+#define writeb(v,c)			__readwrite_bug("writeb")
+#define writew(v,c)			__readwrite_bug("writew")
+#define writel(v,c)			__readwrite_bug("writel")
+
+#define check_signature(io,sig,len)	(0)
+
+#endif	/* __mem_pci */
+
+/*
+ * ioremap and friends.
+ *
+ * ioremap takes a PCI memory address, as specified in
+ * Documentation/IO-mapping.txt.
+ *
+ */
+#ifndef __arch_ioremap
+#define ioremap(cookie,size)		__arm_ioremap(cookie, size, MT_DEVICE)
+#define ioremap_nocache(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE)
+#define ioremap_cached(cookie,size)	__arm_ioremap(cookie, size, MT_DEVICE_CACHED)
+#define iounmap(cookie)			__iounmap(cookie)
+#else
+#define ioremap(cookie,size)		__arch_ioremap((cookie), (size), MT_DEVICE)
+#define ioremap_nocache(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE)
+#define ioremap_cached(cookie,size)	__arch_ioremap((cookie), (size), MT_DEVICE_CACHED)
+#define iounmap(cookie)			__arch_iounmap(cookie)
+#endif
+
+/*
+ * io{read,write}{8,16,32} macros
+ */
+#ifndef ioread8
+#define ioread8(p)	({ unsigned int __v = __raw_readb(p); __v; })
+#define ioread16(p)	({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __v; })
+#define ioread32(p)	({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __v; })
+
+#define iowrite8(v,p)	__raw_writeb(v, p)
+#define iowrite16(v,p)	__raw_writew((__force __u16)cpu_to_le16(v), p)
+#define iowrite32(v,p)	__raw_writel((__force __u32)cpu_to_le32(v), p)
+
+#define ioread8_rep(p,d,c)	__raw_readsb(p,d,c)
+#define ioread16_rep(p,d,c)	__raw_readsw(p,d,c)
+#define ioread32_rep(p,d,c)	__raw_readsl(p,d,c)
+
+#define iowrite8_rep(p,s,c)	__raw_writesb(p,s,c)
+#define iowrite16_rep(p,s,c)	__raw_writesw(p,s,c)
+#define iowrite32_rep(p,s,c)	__raw_writesl(p,s,c)
+
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *addr);
+#endif
+
+struct pci_dev;
+
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
+
+/*
+ * can the hardware map this into one segment or not, given no other
+ * constraints.
+ */
+#define BIOVEC_MERGEABLE(vec1, vec2)	\
+	((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2)))
+
+#ifdef CONFIG_MMU
+#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
+extern int valid_phys_addr_range(unsigned long addr, size_t size);
+extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+#endif
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+/*
+ * Register ISA memory and port locations for glibc iopl/inb/outb
+ * emulation.
+ */
+extern void register_isa_ports(unsigned int mmio, unsigned int io,
+			       unsigned int io_shift);
+
+#endif	/* __KERNEL__ */
+#endif	/* __ASM_ARM_IO_H */
diff --git a/arch/arm/include/asm/ioctl.h b/arch/arm/include/asm/ioctl.h
new file mode 100644
index 000000000000..b279fe06dfe5
--- /dev/null
+++ b/arch/arm/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/arm/include/asm/ioctls.h b/arch/arm/include/asm/ioctls.h
new file mode 100644
index 000000000000..a91d8a1523cf
--- /dev/null
+++ b/arch/arm/include/asm/ioctls.h
@@ -0,0 +1,84 @@
+#ifndef __ASM_ARM_IOCTLS_H
+#define __ASM_ARM_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T',0x2A, struct termios2)
+#define TCSETS2		_IOW('T',0x2B, struct termios2)
+#define TCSETSW2	_IOW('T',0x2C, struct termios2)
+#define TCSETSF2	_IOW('T',0x2D, struct termios2)
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define FIOQSIZE	0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT	0x01	/* Transmitter physically empty */
+
+#endif
diff --git a/arch/arm/include/asm/ipcbuf.h b/arch/arm/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..97683975f7df
--- /dev/null
+++ b/arch/arm/include/asm/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __ASMARM_IPCBUF_H
+#define __ASMARM_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __ASMARM_IPCBUF_H */
diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h
new file mode 100644
index 000000000000..d6786090d02c
--- /dev/null
+++ b/arch/arm/include/asm/irq.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_ARM_IRQ_H
+#define __ASM_ARM_IRQ_H
+
+#include <mach/irqs.h>
+
+#ifndef irq_canonicalize
+#define irq_canonicalize(i)	(i)
+#endif
+
+#ifndef NR_IRQS
+#define NR_IRQS	128
+#endif
+
+/*
+ * Use this value to indicate lack of interrupt
+ * capability
+ */
+#ifndef NO_IRQ
+#define NO_IRQ	((unsigned int)(-1))
+#endif
+
+#ifndef __ASSEMBLY__
+struct irqaction;
+extern void migrate_irqs(void);
+#endif
+
+#endif
+
diff --git a/arch/arm/include/asm/irq_regs.h b/arch/arm/include/asm/irq_regs.h
new file mode 100644
index 000000000000..3dd9c0b70270
--- /dev/null
+++ b/arch/arm/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/arm/include/asm/irqflags.h b/arch/arm/include/asm/irqflags.h
new file mode 100644
index 000000000000..6d09974e6646
--- /dev/null
+++ b/arch/arm/include/asm/irqflags.h
@@ -0,0 +1,132 @@
+#ifndef __ASM_ARM_IRQFLAGS_H
+#define __ASM_ARM_IRQFLAGS_H
+
+#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+
+/*
+ * CPU interrupt mask handling.
+ */
+#if __LINUX_ARM_ARCH__ >= 6
+
+#define raw_local_irq_save(x)					\
+	({							\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_irq_save\n"	\
+	"cpsid	i"						\
+	: "=r" (x) : : "memory", "cc");				\
+	})
+
+#define raw_local_irq_enable()  __asm__("cpsie i	@ __sti" : : : "memory", "cc")
+#define raw_local_irq_disable() __asm__("cpsid i	@ __cli" : : : "memory", "cc")
+#define local_fiq_enable()  __asm__("cpsie f	@ __stf" : : : "memory", "cc")
+#define local_fiq_disable() __asm__("cpsid f	@ __clf" : : : "memory", "cc")
+
+#else
+
+/*
+ * Save the current interrupt enable state & disable IRQs
+ */
+#define raw_local_irq_save(x)					\
+	({							\
+		unsigned long temp;				\
+		(void) (&temp == &x);				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_irq_save\n"	\
+"	orr	%1, %0, #128\n"					\
+"	msr	cpsr_c, %1"					\
+	: "=r" (x), "=r" (temp)					\
+	:							\
+	: "memory", "cc");					\
+	})
+	
+/*
+ * Enable IRQs
+ */
+#define raw_local_irq_enable()					\
+	({							\
+		unsigned long temp;				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_irq_enable\n"	\
+"	bic	%0, %0, #128\n"					\
+"	msr	cpsr_c, %0"					\
+	: "=r" (temp)						\
+	:							\
+	: "memory", "cc");					\
+	})
+
+/*
+ * Disable IRQs
+ */
+#define raw_local_irq_disable()					\
+	({							\
+		unsigned long temp;				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_irq_disable\n"	\
+"	orr	%0, %0, #128\n"					\
+"	msr	cpsr_c, %0"					\
+	: "=r" (temp)						\
+	:							\
+	: "memory", "cc");					\
+	})
+
+/*
+ * Enable FIQs
+ */
+#define local_fiq_enable()					\
+	({							\
+		unsigned long temp;				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ stf\n"		\
+"	bic	%0, %0, #64\n"					\
+"	msr	cpsr_c, %0"					\
+	: "=r" (temp)						\
+	:							\
+	: "memory", "cc");					\
+	})
+
+/*
+ * Disable FIQs
+ */
+#define local_fiq_disable()					\
+	({							\
+		unsigned long temp;				\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ clf\n"		\
+"	orr	%0, %0, #64\n"					\
+"	msr	cpsr_c, %0"					\
+	: "=r" (temp)						\
+	:							\
+	: "memory", "cc");					\
+	})
+
+#endif
+
+/*
+ * Save the current interrupt enable state.
+ */
+#define raw_local_save_flags(x)					\
+	({							\
+	__asm__ __volatile__(					\
+	"mrs	%0, cpsr		@ local_save_flags"	\
+	: "=r" (x) : : "memory", "cc");				\
+	})
+
+/*
+ * restore saved IRQ & FIQ state
+ */
+#define raw_local_irq_restore(x)				\
+	__asm__ __volatile__(					\
+	"msr	cpsr_c, %0		@ local_irq_restore\n"	\
+	:							\
+	: "r" (x)						\
+	: "memory", "cc")
+
+#define raw_irqs_disabled_flags(flags)	\
+({					\
+	(int)((flags) & PSR_I_BIT);	\
+})
+
+#endif
+#endif
diff --git a/arch/arm/include/asm/kdebug.h b/arch/arm/include/asm/kdebug.h
new file mode 100644
index 000000000000..6ece1b037665
--- /dev/null
+++ b/arch/arm/include/asm/kdebug.h
@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>
diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h
new file mode 100644
index 000000000000..c8986bb99ed5
--- /dev/null
+++ b/arch/arm/include/asm/kexec.h
@@ -0,0 +1,31 @@
+#ifndef _ARM_KEXEC_H
+#define _ARM_KEXEC_H
+
+#ifdef CONFIG_KEXEC
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+/* Maximum address we can use for the control code buffer */
+#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
+
+#define KEXEC_CONTROL_CODE_SIZE	4096
+
+#define KEXEC_ARCH KEXEC_ARCH_ARM
+
+#define KEXEC_ARM_ATAGS_OFFSET  0x1000
+#define KEXEC_ARM_ZIMAGE_OFFSET 0x8000
+
+#ifndef __ASSEMBLY__
+
+struct kimage;
+/* Provide a dummy definition to avoid build failures. */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+                                        struct pt_regs *oldregs) { }
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* CONFIG_KEXEC */
+
+#endif /* _ARM_KEXEC_H */
diff --git a/arch/arm/include/asm/kgdb.h b/arch/arm/include/asm/kgdb.h
new file mode 100644
index 000000000000..67af4b841984
--- /dev/null
+++ b/arch/arm/include/asm/kgdb.h
@@ -0,0 +1,104 @@
+/*
+ * ARM KGDB support
+ *
+ * Author: Deepak Saxena <dsaxena@mvista.com>
+ *
+ * Copyright (C) 2002 MontaVista Software Inc.
+ *
+ */
+
+#ifndef __ARM_KGDB_H__
+#define __ARM_KGDB_H__
+
+#include <linux/ptrace.h>
+
+/*
+ * GDB assumes that we're a user process being debugged, so
+ * it will send us an SWI command to write into memory as the
+ * debug trap. When an SWI occurs, the next instruction addr is
+ * placed into R14_svc before jumping to the vector trap.
+ * This doesn't work for kernel debugging as we are already in SVC
+ * we would loose the kernel's LR, which is a bad thing. This
+ * is  bad thing.
+ *
+ * By doing this as an undefined instruction trap, we force a mode
+ * switch from SVC to UND mode, allowing us to save full kernel state.
+ *
+ * We also define a KGDB_COMPILED_BREAK which can be used to compile
+ * in breakpoints. This is important for things like sysrq-G and for
+ * the initial breakpoint from trap_init().
+ *
+ * Note to ARM HW designers: Add real trap support like SH && PPC to
+ * make our lives much much simpler. :)
+ */
+#define BREAK_INSTR_SIZE	4
+#define GDB_BREAKINST		0xef9f0001
+#define KGDB_BREAKINST		0xe7ffdefe
+#define KGDB_COMPILED_BREAK	0xe7ffdeff
+#define CACHE_FLUSH_IS_SAFE	1
+
+#ifndef	__ASSEMBLY__
+
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm(".word 0xe7ffdeff");
+}
+
+extern void kgdb_handle_bus_error(void);
+extern int kgdb_fault_expected;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * From Kevin Hilman:
+ *
+ * gdb is expecting the following registers layout.
+ *
+ * r0-r15: 1 long word each
+ * f0-f7:  unused, 3 long words each !!
+ * fps:    unused, 1 long word
+ * cpsr:   1 long word
+ *
+ * Even though f0-f7 and fps are not used, they need to be
+ * present in the registers sent for correct processing in
+ * the host-side gdb.
+ *
+ * In particular, it is crucial that CPSR is in the right place,
+ * otherwise gdb will not be able to correctly interpret stepping over
+ * conditional branches.
+ */
+#define _GP_REGS		16
+#define _FP_REGS		8
+#define _EXTRA_REGS		2
+#define GDB_MAX_REGS		(_GP_REGS + (_FP_REGS * 3) + _EXTRA_REGS)
+
+#define KGDB_MAX_NO_CPUS	1
+#define BUFMAX			400
+#define NUMREGBYTES		(GDB_MAX_REGS << 2)
+#define NUMCRITREGBYTES		(32 << 2)
+
+#define _R0			0
+#define _R1			1
+#define _R2			2
+#define _R3			3
+#define _R4			4
+#define _R5			5
+#define _R6			6
+#define _R7			7
+#define _R8			8
+#define _R9			9
+#define _R10			10
+#define _FP			11
+#define _IP			12
+#define _SPT			13
+#define _LR			14
+#define _PC			15
+#define _CPSR			(GDB_MAX_REGS - 1)
+
+/*
+ * So that we can denote the end of a frame for tracing,
+ * in the simple case:
+ */
+#define CFI_END_FRAME(func)	__CFI_END_FRAME(_PC, _SPT, func)
+
+#endif /* __ASM_KGDB_H__ */
diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h
new file mode 100644
index 000000000000..45def13ee17a
--- /dev/null
+++ b/arch/arm/include/asm/kmap_types.h
@@ -0,0 +1,24 @@
+#ifndef __ARM_KMAP_TYPES_H
+#define __ARM_KMAP_TYPES_H
+
+/*
+ * This is the "bare minimum".  AIO seems to require this.
+ */
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h
new file mode 100644
index 000000000000..a5d0d99ad387
--- /dev/null
+++ b/arch/arm/include/asm/kprobes.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/include/asm/kprobes.h
+ *
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef _ARM_KPROBES_H
+#define _ARM_KPROBES_H
+
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+#define MAX_INSN_SIZE			2
+#define MAX_STACK_SIZE			64	/* 32 would probably be OK */
+
+/*
+ * This undefined instruction must be unique and
+ * reserved solely for kprobes' use.
+ */
+#define KPROBE_BREAKPOINT_INSTRUCTION	0xe7f001f8
+
+#define regs_return_value(regs)		((regs)->ARM_r0)
+#define flush_insn_slot(p)		do { } while (0)
+#define kretprobe_blacklist_size	0
+
+typedef u32 kprobe_opcode_t;
+
+struct kprobe;
+typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *);
+
+/* Architecture specific copy of original instruction. */
+struct arch_specific_insn {
+	kprobe_opcode_t		*insn;
+	kprobe_insn_handler_t	*insn_handler;
+};
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned int status;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned int kprobe_status;
+	struct prev_kprobe prev_kprobe;
+	struct pt_regs jprobe_saved_regs;
+	char jprobes_stack[MAX_STACK_SIZE];
+};
+
+void arch_remove_kprobe(struct kprobe *);
+void kretprobe_trampoline(void);
+
+int kprobe_trap_handler(struct pt_regs *regs, unsigned int instr);
+int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
+int kprobe_exceptions_notify(struct notifier_block *self,
+			     unsigned long val, void *data);
+
+enum kprobe_insn {
+	INSN_REJECTED,
+	INSN_GOOD,
+	INSN_GOOD_NO_SLOT
+};
+
+enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t,
+					struct arch_specific_insn *);
+void __init arm_kprobe_decode_init(void);
+
+#endif /* _ARM_KPROBES_H */
diff --git a/arch/arm/include/asm/leds.h b/arch/arm/include/asm/leds.h
new file mode 100644
index 000000000000..c545739f39b7
--- /dev/null
+++ b/arch/arm/include/asm/leds.h
@@ -0,0 +1,50 @@
+/*
+ *  arch/arm/include/asm/leds.h
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Event-driven interface for LEDs on machines
+ *  Added led_start and led_stop- Alex Holden, 28th Dec 1998.
+ */
+#ifndef ASM_ARM_LEDS_H
+#define ASM_ARM_LEDS_H
+
+
+typedef enum {
+	led_idle_start,
+	led_idle_end,
+	led_timer,
+	led_start,
+	led_stop,
+	led_claim,		/* override idle & timer leds */
+	led_release,		/* restore idle & timer leds */
+	led_start_timer_mode,
+	led_stop_timer_mode,
+	led_green_on,
+	led_green_off,
+	led_amber_on,
+	led_amber_off,
+	led_red_on,
+	led_red_off,
+	led_blue_on,
+	led_blue_off,
+	/*
+	 * I want this between led_timer and led_start, but
+	 * someone has decided to export this to user space
+	 */
+	led_halted
+} led_event_t;
+
+/* Use this routine to handle LEDs */
+
+#ifdef CONFIG_LEDS
+extern void (*leds_event)(led_event_t);
+#else
+#define leds_event(e)
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/limits.h b/arch/arm/include/asm/limits.h
new file mode 100644
index 000000000000..08d8c6600804
--- /dev/null
+++ b/arch/arm/include/asm/limits.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_PIPE_H
+#define __ASM_PIPE_H
+
+#ifndef PAGE_SIZE
+#include <asm/page.h>
+#endif
+
+#define PIPE_BUF	PAGE_SIZE
+
+#endif
+
diff --git a/arch/arm/include/asm/linkage.h b/arch/arm/include/asm/linkage.h
new file mode 100644
index 000000000000..5a25632b1bc0
--- /dev/null
+++ b/arch/arm/include/asm/linkage.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .align 0
+#define __ALIGN_STR ".align 0"
+
+#define ENDPROC(name) \
+  .type name, %function; \
+  END(name)
+
+#endif
diff --git a/arch/arm/include/asm/local.h b/arch/arm/include/asm/local.h
new file mode 100644
index 000000000000..c11c530f74d0
--- /dev/null
+++ b/arch/arm/include/asm/local.h
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/arch/arm/include/asm/locks.h b/arch/arm/include/asm/locks.h
new file mode 100644
index 000000000000..ef4c897772d1
--- /dev/null
+++ b/arch/arm/include/asm/locks.h
@@ -0,0 +1,274 @@
+/*
+ *  arch/arm/include/asm/locks.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Interrupt safe locking assembler. 
+ */
+#ifndef __ASM_PROC_LOCKS_H
+#define __ASM_PROC_LOCKS_H
+
+#if __LINUX_ARM_ARCH__ >= 6
+
+#define __down_op(ptr,fail)			\
+	({					\
+	__asm__ __volatile__(			\
+	"@ down_op\n"				\
+"1:	ldrex	lr, [%0]\n"			\
+"	sub	lr, lr, %1\n"			\
+"	strex	ip, lr, [%0]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	teq	lr, #0\n"			\
+"	movmi	ip, %0\n"			\
+"	blmi	" #fail				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc");			\
+	smp_mb();				\
+	})
+
+#define __down_op_ret(ptr,fail)			\
+	({					\
+		unsigned int ret;		\
+	__asm__ __volatile__(			\
+	"@ down_op_ret\n"			\
+"1:	ldrex	lr, [%1]\n"			\
+"	sub	lr, lr, %2\n"			\
+"	strex	ip, lr, [%1]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	teq	lr, #0\n"			\
+"	movmi	ip, %1\n"			\
+"	movpl	ip, #0\n"			\
+"	blmi	" #fail "\n"			\
+"	mov	%0, ip"				\
+	: "=&r" (ret)				\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc");			\
+	smp_mb();				\
+	ret;					\
+	})
+
+#define __up_op(ptr,wake)			\
+	({					\
+	smp_mb();				\
+	__asm__ __volatile__(			\
+	"@ up_op\n"				\
+"1:	ldrex	lr, [%0]\n"			\
+"	add	lr, lr, %1\n"			\
+"	strex	ip, lr, [%0]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	cmp	lr, #0\n"			\
+"	movle	ip, %0\n"			\
+"	blle	" #wake				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc");			\
+	})
+
+/*
+ * The value 0x01000000 supports up to 128 processors and
+ * lots of processes.  BIAS must be chosen such that sub'ing
+ * BIAS once per CPU will result in the long remaining
+ * negative.
+ */
+#define RW_LOCK_BIAS      0x01000000
+#define RW_LOCK_BIAS_STR "0x01000000"
+
+#define __down_op_write(ptr,fail)		\
+	({					\
+	__asm__ __volatile__(			\
+	"@ down_op_write\n"			\
+"1:	ldrex	lr, [%0]\n"			\
+"	sub	lr, lr, %1\n"			\
+"	strex	ip, lr, [%0]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	teq	lr, #0\n"			\
+"	movne	ip, %0\n"			\
+"	blne	" #fail				\
+	:					\
+	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
+	: "ip", "lr", "cc");			\
+	smp_mb();				\
+	})
+
+#define __up_op_write(ptr,wake)			\
+	({					\
+	smp_mb();				\
+	__asm__ __volatile__(			\
+	"@ up_op_write\n"			\
+"1:	ldrex	lr, [%0]\n"			\
+"	adds	lr, lr, %1\n"			\
+"	strex	ip, lr, [%0]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	movcs	ip, %0\n"			\
+"	blcs	" #wake				\
+	:					\
+	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
+	: "ip", "lr", "cc");			\
+	})
+
+#define __down_op_read(ptr,fail)		\
+	__down_op(ptr, fail)
+
+#define __up_op_read(ptr,wake)			\
+	({					\
+	smp_mb();				\
+	__asm__ __volatile__(			\
+	"@ up_op_read\n"			\
+"1:	ldrex	lr, [%0]\n"			\
+"	add	lr, lr, %1\n"			\
+"	strex	ip, lr, [%0]\n"			\
+"	teq	ip, #0\n"			\
+"	bne	1b\n"				\
+"	teq	lr, #0\n"			\
+"	moveq	ip, %0\n"			\
+"	bleq	" #wake				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc");			\
+	})
+
+#else
+
+#define __down_op(ptr,fail)			\
+	({					\
+	__asm__ __volatile__(			\
+	"@ down_op\n"				\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%0]\n"			\
+"	subs	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	movmi	ip, %0\n"			\
+"	blmi	" #fail				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc");			\
+	smp_mb();				\
+	})
+
+#define __down_op_ret(ptr,fail)			\
+	({					\
+		unsigned int ret;		\
+	__asm__ __volatile__(			\
+	"@ down_op_ret\n"			\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%1]\n"			\
+"	subs	lr, lr, %2\n"			\
+"	str	lr, [%1]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	movmi	ip, %1\n"			\
+"	movpl	ip, #0\n"			\
+"	blmi	" #fail "\n"			\
+"	mov	%0, ip"				\
+	: "=&r" (ret)				\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc");			\
+	smp_mb();				\
+	ret;					\
+	})
+
+#define __up_op(ptr,wake)			\
+	({					\
+	smp_mb();				\
+	__asm__ __volatile__(			\
+	"@ up_op\n"				\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%0]\n"			\
+"	adds	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	movle	ip, %0\n"			\
+"	blle	" #wake				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc");			\
+	})
+
+/*
+ * The value 0x01000000 supports up to 128 processors and
+ * lots of processes.  BIAS must be chosen such that sub'ing
+ * BIAS once per CPU will result in the long remaining
+ * negative.
+ */
+#define RW_LOCK_BIAS      0x01000000
+#define RW_LOCK_BIAS_STR "0x01000000"
+
+#define __down_op_write(ptr,fail)		\
+	({					\
+	__asm__ __volatile__(			\
+	"@ down_op_write\n"			\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%0]\n"			\
+"	subs	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	movne	ip, %0\n"			\
+"	blne	" #fail				\
+	:					\
+	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
+	: "ip", "lr", "cc");			\
+	smp_mb();				\
+	})
+
+#define __up_op_write(ptr,wake)			\
+	({					\
+	__asm__ __volatile__(			\
+	"@ up_op_write\n"			\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%0]\n"			\
+"	adds	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	movcs	ip, %0\n"			\
+"	blcs	" #wake				\
+	:					\
+	: "r" (ptr), "I" (RW_LOCK_BIAS)		\
+	: "ip", "lr", "cc");			\
+	smp_mb();				\
+	})
+
+#define __down_op_read(ptr,fail)		\
+	__down_op(ptr, fail)
+
+#define __up_op_read(ptr,wake)			\
+	({					\
+	smp_mb();				\
+	__asm__ __volatile__(			\
+	"@ up_op_read\n"			\
+"	mrs	ip, cpsr\n"			\
+"	orr	lr, ip, #128\n"			\
+"	msr	cpsr_c, lr\n"			\
+"	ldr	lr, [%0]\n"			\
+"	adds	lr, lr, %1\n"			\
+"	str	lr, [%0]\n"			\
+"	msr	cpsr_c, ip\n"			\
+"	moveq	ip, %0\n"			\
+"	bleq	" #wake				\
+	:					\
+	: "r" (ptr), "I" (1)			\
+	: "ip", "lr", "cc");			\
+	})
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
new file mode 100644
index 000000000000..c59842dc7cb8
--- /dev/null
+++ b/arch/arm/include/asm/mach/arch.h
@@ -0,0 +1,60 @@
+/*
+ *  arch/arm/include/asm/mach/arch.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASSEMBLY__
+
+struct tag;
+struct meminfo;
+struct sys_timer;
+
+struct machine_desc {
+	/*
+	 * Note! The first four elements are used
+	 * by assembler code in head.S, head-common.S
+	 */
+	unsigned int		nr;		/* architecture number	*/
+	unsigned int		phys_io;	/* start of physical io	*/
+	unsigned int		io_pg_offst;	/* byte offset for io 
+						 * page tabe entry	*/
+
+	const char		*name;		/* architecture name	*/
+	unsigned long		boot_params;	/* tagged list		*/
+
+	unsigned int		video_start;	/* start of video RAM	*/
+	unsigned int		video_end;	/* end of video RAM	*/
+
+	unsigned int		reserve_lp0 :1;	/* never has lp0	*/
+	unsigned int		reserve_lp1 :1;	/* never has lp1	*/
+	unsigned int		reserve_lp2 :1;	/* never has lp2	*/
+	unsigned int		soft_reboot :1;	/* soft reboot		*/
+	void			(*fixup)(struct machine_desc *,
+					 struct tag *, char **,
+					 struct meminfo *);
+	void			(*map_io)(void);/* IO mapping function	*/
+	void			(*init_irq)(void);
+	struct sys_timer	*timer;		/* system tick timer	*/
+	void			(*init_machine)(void);
+};
+
+/*
+ * Set of macros to define architecture features.  This is built into
+ * a table by the linker.
+ */
+#define MACHINE_START(_type,_name)			\
+static const struct machine_desc __mach_desc_##_type	\
+ __used							\
+ __attribute__((__section__(".arch.info.init"))) = {	\
+	.nr		= MACH_TYPE_##_type,		\
+	.name		= _name,
+
+#define MACHINE_END				\
+};
+
+#endif
diff --git a/arch/arm/include/asm/mach/dma.h b/arch/arm/include/asm/mach/dma.h
new file mode 100644
index 000000000000..fc7278ea7146
--- /dev/null
+++ b/arch/arm/include/asm/mach/dma.h
@@ -0,0 +1,57 @@
+/*
+ *  arch/arm/include/asm/mach/dma.h
+ *
+ *  Copyright (C) 1998-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This header file describes the interface between the generic DMA handler
+ *  (dma.c) and the architecture-specific DMA backends (dma-*.c)
+ */
+
+struct dma_struct;
+typedef struct dma_struct dma_t;
+
+struct dma_ops {
+	int	(*request)(dmach_t, dma_t *);		/* optional */
+	void	(*free)(dmach_t, dma_t *);		/* optional */
+	void	(*enable)(dmach_t, dma_t *);		/* mandatory */
+	void 	(*disable)(dmach_t, dma_t *);		/* mandatory */
+	int	(*residue)(dmach_t, dma_t *);		/* optional */
+	int	(*setspeed)(dmach_t, dma_t *, int);	/* optional */
+	char	*type;
+};
+
+struct dma_struct {
+	void		*addr;		/* single DMA address		*/
+	unsigned long	count;		/* single DMA size		*/
+	struct scatterlist buf;		/* single DMA			*/
+	int		sgcount;	/* number of DMA SG		*/
+	struct scatterlist *sg;		/* DMA Scatter-Gather List	*/
+
+	unsigned int	active:1;	/* Transfer active		*/
+	unsigned int	invalid:1;	/* Address/Count changed	*/
+
+	dmamode_t	dma_mode;	/* DMA mode			*/
+	int		speed;		/* DMA speed			*/
+
+	unsigned int	lock;		/* Device is allocated		*/
+	const char	*device_id;	/* Device name			*/
+
+	unsigned int	dma_base;	/* Controller base address	*/
+	int		dma_irq;	/* Controller IRQ		*/
+	struct scatterlist cur_sg;	/* Current controller buffer	*/
+	unsigned int	state;
+
+	struct dma_ops	*d_ops;
+};
+
+/* Prototype: void arch_dma_init(dma)
+ * Purpose  : Initialise architecture specific DMA
+ * Params   : dma - pointer to array of DMA structures
+ */
+extern void arch_dma_init(dma_t *dma);
+
+extern void isa_init_dma(dma_t *dma);
diff --git a/arch/arm/include/asm/mach/flash.h b/arch/arm/include/asm/mach/flash.h
new file mode 100644
index 000000000000..4ca69fe2c850
--- /dev/null
+++ b/arch/arm/include/asm/mach/flash.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/include/asm/mach/flash.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_MACH_FLASH_H
+#define ASMARM_MACH_FLASH_H
+
+struct mtd_partition;
+struct mtd_info;
+
+/*
+ * map_name:	the map probe function name
+ * name:	flash device name (eg, as used with mtdparts=)
+ * width:	width of mapped device
+ * init:	method called at driver/device initialisation
+ * exit:	method called at driver/device removal
+ * set_vpp:	method called to enable or disable VPP
+ * mmcontrol:	method called to enable or disable Sync. Burst Read in OneNAND
+ * parts:	optional array of mtd_partitions for static partitioning
+ * nr_parts:	number of mtd_partitions for static partitoning
+ */
+struct flash_platform_data {
+	const char	*map_name;
+	const char	*name;
+	unsigned int	width;
+	int		(*init)(void);
+	void		(*exit)(void);
+	void		(*set_vpp)(int on);
+	void		(*mmcontrol)(struct mtd_info *mtd, int sync_read);
+	struct mtd_partition *parts;
+	unsigned int	nr_parts;
+};
+
+#endif
diff --git a/arch/arm/include/asm/mach/irda.h b/arch/arm/include/asm/mach/irda.h
new file mode 100644
index 000000000000..38f77b5e56cf
--- /dev/null
+++ b/arch/arm/include/asm/mach/irda.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/include/asm/mach/irda.h
+ *
+ *  Copyright (C) 2004 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_MACH_IRDA_H
+#define __ASM_ARM_MACH_IRDA_H
+
+struct irda_platform_data {
+	int (*startup)(struct device *);
+	void (*shutdown)(struct device *);
+	int (*set_power)(struct device *, unsigned int state);
+	void (*set_speed)(struct device *, unsigned int speed);
+};
+
+#endif
diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
new file mode 100644
index 000000000000..acac5302e4ea
--- /dev/null
+++ b/arch/arm/include/asm/mach/irq.h
@@ -0,0 +1,34 @@
+/*
+ *  arch/arm/include/asm/mach/irq.h
+ *
+ *  Copyright (C) 1995-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_MACH_IRQ_H
+#define __ASM_ARM_MACH_IRQ_H
+
+#include <linux/irq.h>
+
+struct seq_file;
+
+/*
+ * This is internal.  Do not use it.
+ */
+extern void (*init_arch_irq)(void);
+extern void init_FIQ(void);
+extern int show_fiq_list(struct seq_file *, void *);
+
+/*
+ * This is for easy migration, but should be changed in the source
+ */
+#define do_bad_IRQ(irq,desc)				\
+do {							\
+	spin_lock(&desc->lock);				\
+	handle_bad_irq(irq, desc);			\
+	spin_unlock(&desc->lock);			\
+} while(0)
+
+#endif
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
new file mode 100644
index 000000000000..06f583b13999
--- /dev/null
+++ b/arch/arm/include/asm/mach/map.h
@@ -0,0 +1,36 @@
+/*
+ *  arch/arm/include/asm/map.h
+ *
+ *  Copyright (C) 1999-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Page table mapping constructs and function prototypes
+ */
+#include <asm/io.h>
+
+struct map_desc {
+	unsigned long virtual;
+	unsigned long pfn;
+	unsigned long length;
+	unsigned int type;
+};
+
+/* types 0-3 are defined in asm/io.h */
+#define MT_CACHECLEAN		4
+#define MT_MINICLEAN		5
+#define MT_LOW_VECTORS		6
+#define MT_HIGH_VECTORS		7
+#define MT_MEMORY		8
+#define MT_ROM			9
+
+#define MT_NONSHARED_DEVICE	MT_DEVICE_NONSHARED
+#define MT_IXP2000_DEVICE	MT_DEVICE_IXP2000
+
+#ifdef CONFIG_MMU
+extern void iotable_init(struct map_desc *, int);
+#else
+#define iotable_init(map,num)	do { } while (0)
+#endif
diff --git a/arch/arm/include/asm/mach/mmc.h b/arch/arm/include/asm/mach/mmc.h
new file mode 100644
index 000000000000..4da332b03144
--- /dev/null
+++ b/arch/arm/include/asm/mach/mmc.h
@@ -0,0 +1,15 @@
+/*
+ *  arch/arm/include/asm/mach/mmc.h
+ */
+#ifndef ASMARM_MACH_MMC_H
+#define ASMARM_MACH_MMC_H
+
+#include <linux/mmc/host.h>
+
+struct mmc_platform_data {
+	unsigned int ocr_mask;			/* available voltages */
+	u32 (*translate_vdd)(struct device *, unsigned int);
+	unsigned int (*status)(struct device *);
+};
+
+#endif
diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h
new file mode 100644
index 000000000000..32da1ae17e06
--- /dev/null
+++ b/arch/arm/include/asm/mach/pci.h
@@ -0,0 +1,72 @@
+/*
+ *  arch/arm/include/asm/mach/pci.h
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+struct pci_sys_data;
+struct pci_bus;
+
+struct hw_pci {
+	struct list_head buses;
+	int		nr_controllers;
+	int		(*setup)(int nr, struct pci_sys_data *);
+	struct pci_bus *(*scan)(int nr, struct pci_sys_data *);
+	void		(*preinit)(void);
+	void		(*postinit)(void);
+	u8		(*swizzle)(struct pci_dev *dev, u8 *pin);
+	int		(*map_irq)(struct pci_dev *dev, u8 slot, u8 pin);
+};
+
+/*
+ * Per-controller structure
+ */
+struct pci_sys_data {
+	struct list_head node;
+	int		busnr;		/* primary bus number			*/
+	u64		mem_offset;	/* bus->cpu memory mapping offset	*/
+	unsigned long	io_offset;	/* bus->cpu IO mapping offset		*/
+	struct pci_bus	*bus;		/* PCI bus				*/
+	struct resource *resource[3];	/* Primary PCI bus resources		*/
+					/* Bridge swizzling			*/
+	u8		(*swizzle)(struct pci_dev *, u8 *);
+					/* IRQ mapping				*/
+	int		(*map_irq)(struct pci_dev *, u8, u8);
+	struct hw_pci	*hw;
+};
+
+/*
+ * This is the standard PCI-PCI bridge swizzling algorithm.
+ */
+u8 pci_std_swizzle(struct pci_dev *dev, u8 *pinp);
+
+/*
+ * Call this with your hw_pci struct to initialise the PCI system.
+ */
+void pci_common_init(struct hw_pci *);
+
+/*
+ * PCI controllers
+ */
+extern int iop3xx_pci_setup(int nr, struct pci_sys_data *);
+extern struct pci_bus *iop3xx_pci_scan_bus(int nr, struct pci_sys_data *);
+extern void iop3xx_pci_preinit(void);
+extern void iop3xx_pci_preinit_cond(void);
+
+extern int dc21285_setup(int nr, struct pci_sys_data *);
+extern struct pci_bus *dc21285_scan_bus(int nr, struct pci_sys_data *);
+extern void dc21285_preinit(void);
+extern void dc21285_postinit(void);
+
+extern int via82c505_setup(int nr, struct pci_sys_data *);
+extern struct pci_bus *via82c505_scan_bus(int nr, struct pci_sys_data *);
+extern void via82c505_init(void *sysdata);
+
+extern int pci_v3_setup(int nr, struct pci_sys_data *);
+extern struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *);
+extern void pci_v3_preinit(void);
+extern void pci_v3_postinit(void);
diff --git a/arch/arm/include/asm/mach/serial_at91.h b/arch/arm/include/asm/mach/serial_at91.h
new file mode 100644
index 000000000000..ea6d063923b8
--- /dev/null
+++ b/arch/arm/include/asm/mach/serial_at91.h
@@ -0,0 +1,33 @@
+/*
+ *  arch/arm/include/asm/mach/serial_at91.h
+ *
+ *  Based on serial_sa1100.h  by Nicolas Pitre
+ *
+ *  Copyright (C) 2002 ATMEL Rousset
+ *
+ *  Low level machine dependent UART functions.
+ */
+
+struct uart_port;
+
+/*
+ * This is a temporary structure for registering these
+ * functions; it is intended to be discarded after boot.
+ */
+struct atmel_port_fns {
+	void	(*set_mctrl)(struct uart_port *, u_int);
+	u_int	(*get_mctrl)(struct uart_port *);
+	void	(*enable_ms)(struct uart_port *);
+	void	(*pm)(struct uart_port *, u_int, u_int);
+	int	(*set_wake)(struct uart_port *, u_int);
+	int	(*open)(struct uart_port *);
+	void	(*close)(struct uart_port *);
+};
+
+#if defined(CONFIG_SERIAL_ATMEL)
+void atmel_register_uart_fns(struct atmel_port_fns *fns);
+#else
+#define atmel_register_uart_fns(fns) do { } while (0)
+#endif
+
+
diff --git a/arch/arm/include/asm/mach/serial_sa1100.h b/arch/arm/include/asm/mach/serial_sa1100.h
new file mode 100644
index 000000000000..d09064bf95a0
--- /dev/null
+++ b/arch/arm/include/asm/mach/serial_sa1100.h
@@ -0,0 +1,31 @@
+/*
+ *  arch/arm/include/asm/mach/serial_sa1100.h
+ *
+ *  Author: Nicolas Pitre
+ *
+ * Moved and changed lots, Russell King
+ *
+ * Low level machine dependent UART functions.
+ */
+
+struct uart_port;
+struct uart_info;
+
+/*
+ * This is a temporary structure for registering these
+ * functions; it is intended to be discarded after boot.
+ */
+struct sa1100_port_fns {
+	void	(*set_mctrl)(struct uart_port *, u_int);
+	u_int	(*get_mctrl)(struct uart_port *);
+	void	(*pm)(struct uart_port *, u_int, u_int);
+	int	(*set_wake)(struct uart_port *, u_int);
+};
+
+#ifdef CONFIG_SERIAL_SA1100
+void sa1100_register_uart_fns(struct sa1100_port_fns *fns);
+void sa1100_register_uart(int idx, int port);
+#else
+#define sa1100_register_uart_fns(fns) do { } while (0)
+#define sa1100_register_uart(idx,port) do { } while (0)
+#endif
diff --git a/arch/arm/include/asm/mach/sharpsl_param.h b/arch/arm/include/asm/mach/sharpsl_param.h
new file mode 100644
index 000000000000..7a24ecf04220
--- /dev/null
+++ b/arch/arm/include/asm/mach/sharpsl_param.h
@@ -0,0 +1,37 @@
+/*
+ * Hardware parameter area specific to Sharp SL series devices
+ *
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct sharpsl_param_info {
+  unsigned int comadj_keyword;
+  unsigned int comadj;
+
+  unsigned int uuid_keyword;
+  unsigned char uuid[16];
+
+  unsigned int touch_keyword;
+  unsigned int touch_xp;
+  unsigned int touch_yp;
+  unsigned int touch_xd;
+  unsigned int touch_yd;
+
+  unsigned int adadj_keyword;
+  unsigned int adadj;
+
+  unsigned int phad_keyword;
+  unsigned int phadadj;
+} __attribute__((packed));
+
+
+extern struct sharpsl_param_info sharpsl_param;
+extern void sharpsl_save_param(void);
+
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
new file mode 100644
index 000000000000..b2cc1fcd0400
--- /dev/null
+++ b/arch/arm/include/asm/mach/time.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/include/asm/mach/time.h
+ *
+ * Copyright (C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_MACH_TIME_H
+#define __ASM_ARM_MACH_TIME_H
+
+#include <linux/sysdev.h>
+
+/*
+ * This is our kernel timer structure.
+ *
+ * - init
+ *   Initialise the kernels jiffy timer source, claim interrupt
+ *   using setup_irq.  This is called early on during initialisation
+ *   while interrupts are still disabled on the local CPU.
+ * - suspend
+ *   Suspend the kernel jiffy timer source, if necessary.  This
+ *   is called with interrupts disabled, after all normal devices
+ *   have been suspended.  If no action is required, set this to
+ *   NULL.
+ * - resume
+ *   Resume the kernel jiffy timer source, if necessary.  This
+ *   is called with interrupts disabled before any normal devices
+ *   are resumed.  If no action is required, set this to NULL.
+ * - offset
+ *   Return the timer offset in microseconds since the last timer
+ *   interrupt.  Note: this must take account of any unprocessed
+ *   timer interrupt which may be pending.
+ */
+struct sys_timer {
+	struct sys_device	dev;
+	void			(*init)(void);
+	void			(*suspend)(void);
+	void			(*resume)(void);
+#ifndef CONFIG_GENERIC_TIME
+	unsigned long		(*offset)(void);
+#endif
+};
+
+extern struct sys_timer *system_timer;
+extern void timer_tick(void);
+
+/*
+ * Kernel time keeping support.
+ */
+struct timespec;
+extern int (*set_rtc)(void);
+extern void save_time_delta(struct timespec *delta, struct timespec *rtc);
+extern void restore_time_delta(struct timespec *delta, struct timespec *rtc);
+
+#endif
diff --git a/arch/arm/include/asm/mach/udc_pxa2xx.h b/arch/arm/include/asm/mach/udc_pxa2xx.h
new file mode 100644
index 000000000000..270902c353fd
--- /dev/null
+++ b/arch/arm/include/asm/mach/udc_pxa2xx.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/include/asm/mach/udc_pxa2xx.h
+ *
+ * This supports machine-specific differences in how the PXA2xx
+ * USB Device Controller (UDC) is wired.
+ *
+ * It is set in linux/arch/arm/mach-pxa/<machine>.c or in
+ * linux/arch/mach-ixp4xx/<machine>.c and used in
+ * the probe routine of linux/drivers/usb/gadget/pxa2xx_udc.c
+ */
+
+struct pxa2xx_udc_mach_info {
+        int  (*udc_is_connected)(void);		/* do we see host? */
+        void (*udc_command)(int cmd);
+#define	PXA2XX_UDC_CMD_CONNECT		0	/* let host see us */
+#define	PXA2XX_UDC_CMD_DISCONNECT	1	/* so host won't see us */
+
+	/* Boards following the design guidelines in the developer's manual,
+	 * with on-chip GPIOs not Lubbock's weird hardware, can have a sane
+	 * VBUS IRQ and omit the methods above.  Store the GPIO number
+	 * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
+	 * Note that sometimes the signals go through inverters...
+	 */
+	bool	gpio_vbus_inverted;
+	u16	gpio_vbus;			/* high == vbus present */
+	bool	gpio_pullup_inverted;
+	u16	gpio_pullup;			/* high == pullup activated */
+};
+
diff --git a/arch/arm/include/asm/mc146818rtc.h b/arch/arm/include/asm/mc146818rtc.h
new file mode 100644
index 000000000000..e1ca48a9e973
--- /dev/null
+++ b/arch/arm/include/asm/mc146818rtc.h
@@ -0,0 +1,28 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#include <mach/irqs.h>
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
new file mode 100644
index 000000000000..1e070a2b561a
--- /dev/null
+++ b/arch/arm/include/asm/memory.h
@@ -0,0 +1,334 @@
+/*
+ *  arch/arm/include/asm/memory.h
+ *
+ *  Copyright (C) 2000-2002 Russell King
+ *  modification for nommu, Hyok S. Choi, 2004
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Note: this file should not be included by non-asm/.h files
+ */
+#ifndef __ASM_ARM_MEMORY_H
+#define __ASM_ARM_MEMORY_H
+
+/*
+ * Allow for constants defined here to be used from assembly code
+ * by prepending the UL suffix only with actual C code compilation.
+ */
+#ifndef __ASSEMBLY__
+#define UL(x) (x##UL)
+#else
+#define UL(x) (x)
+#endif
+
+#include <linux/compiler.h>
+#include <mach/memory.h>
+#include <asm/sizes.h>
+
+#ifdef CONFIG_MMU
+
+#ifndef TASK_SIZE
+/*
+ * TASK_SIZE - the maximum size of a user space task.
+ * TASK_UNMAPPED_BASE - the lower boundary of the mmap VM area
+ */
+#define TASK_SIZE		UL(0xbf000000)
+#define TASK_UNMAPPED_BASE	UL(0x40000000)
+#endif
+
+/*
+ * The maximum size of a 26-bit user space task.
+ */
+#define TASK_SIZE_26		UL(0x04000000)
+
+/*
+ * Page offset: 3GB
+ */
+#ifndef PAGE_OFFSET
+#define PAGE_OFFSET		UL(0xc0000000)
+#endif
+
+/*
+ * The module space lives between the addresses given by TASK_SIZE
+ * and PAGE_OFFSET - it must be within 32MB of the kernel text.
+ */
+#define MODULE_END		(PAGE_OFFSET)
+#define MODULE_START		(MODULE_END - 16*1048576)
+
+#if TASK_SIZE > MODULE_START
+#error Top of user space clashes with start of module space
+#endif
+
+/*
+ * The XIP kernel gets mapped at the bottom of the module vm area.
+ * Since we use sections to map it, this macro replaces the physical address
+ * with its virtual address while keeping offset from the base section.
+ */
+#define XIP_VIRT_ADDR(physaddr)  (MODULE_START + ((physaddr) & 0x000fffff))
+
+/*
+ * Allow 16MB-aligned ioremap pages
+ */
+#define IOREMAP_MAX_ORDER	24
+
+#else /* CONFIG_MMU */
+
+/*
+ * The limitation of user task size can grow up to the end of free ram region.
+ * It is difficult to define and perhaps will never meet the original meaning
+ * of this define that was meant to.
+ * Fortunately, there is no reference for this in noMMU mode, for now.
+ */
+#ifndef TASK_SIZE
+#define TASK_SIZE		(CONFIG_DRAM_SIZE)
+#endif
+
+#ifndef TASK_UNMAPPED_BASE
+#define TASK_UNMAPPED_BASE	UL(0x00000000)
+#endif
+
+#ifndef PHYS_OFFSET
+#define PHYS_OFFSET 		(CONFIG_DRAM_BASE)
+#endif
+
+#ifndef END_MEM
+#define END_MEM     		(CONFIG_DRAM_BASE + CONFIG_DRAM_SIZE)
+#endif
+
+#ifndef PAGE_OFFSET
+#define PAGE_OFFSET		(PHYS_OFFSET)
+#endif
+
+/*
+ * The module can be at any place in ram in nommu mode.
+ */
+#define MODULE_END		(END_MEM)
+#define MODULE_START		(PHYS_OFFSET)
+
+#endif /* !CONFIG_MMU */
+
+/*
+ * Size of DMA-consistent memory region.  Must be multiple of 2M,
+ * between 2MB and 14MB inclusive.
+ */
+#ifndef CONSISTENT_DMA_SIZE
+#define CONSISTENT_DMA_SIZE SZ_2M
+#endif
+
+/*
+ * Physical vs virtual RAM address space conversion.  These are
+ * private definitions which should NOT be used outside memory.h
+ * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
+ */
+#ifndef __virt_to_phys
+#define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
+#define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
+#endif
+
+/*
+ * Convert a physical address to a Page Frame Number and back
+ */
+#define	__phys_to_pfn(paddr)	((paddr) >> PAGE_SHIFT)
+#define	__pfn_to_phys(pfn)	((pfn) << PAGE_SHIFT)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The DMA mask corresponding to the maximum bus address allocatable
+ * using GFP_DMA.  The default here places no restriction on DMA
+ * allocations.  This must be the smallest DMA mask in the system,
+ * so a successful GFP_DMA allocation will always satisfy this.
+ */
+#ifndef ISA_DMA_THRESHOLD
+#define ISA_DMA_THRESHOLD	(0xffffffffULL)
+#endif
+
+#ifndef arch_adjust_zones
+#define arch_adjust_zones(node,size,holes) do { } while (0)
+#endif
+
+/*
+ * PFNs are used to describe any physical page; this means
+ * PFN 0 == physical address 0.
+ *
+ * This is the PFN of the first RAM page in the kernel
+ * direct-mapped view.  We assume this is the first page
+ * of RAM in the mem_map as well.
+ */
+#define PHYS_PFN_OFFSET	(PHYS_OFFSET >> PAGE_SHIFT)
+
+/*
+ * These are *only* valid on the kernel direct mapped RAM memory.
+ * Note: Drivers should NOT use these.  They are the wrong
+ * translation for translating DMA addresses.  Use the driver
+ * DMA support - see dma-mapping.h.
+ */
+static inline unsigned long virt_to_phys(void *x)
+{
+	return __virt_to_phys((unsigned long)(x));
+}
+
+static inline void *phys_to_virt(unsigned long x)
+{
+	return (void *)(__phys_to_virt((unsigned long)(x)));
+}
+
+/*
+ * Drivers should NOT use these either.
+ */
+#define __pa(x)			__virt_to_phys((unsigned long)(x))
+#define __va(x)			((void *)__phys_to_virt((unsigned long)(x)))
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+
+/*
+ * Virtual <-> DMA view memory address translations
+ * Again, these are *only* valid on the kernel direct mapped RAM
+ * memory.  Use of these is *deprecated* (and that doesn't mean
+ * use the __ prefixed forms instead.)  See dma-mapping.h.
+ */
+static inline __deprecated unsigned long virt_to_bus(void *x)
+{
+	return __virt_to_bus((unsigned long)x);
+}
+
+static inline __deprecated void *bus_to_virt(unsigned long x)
+{
+	return (void *)__bus_to_virt(x);
+}
+
+/*
+ * Conversion between a struct page and a physical address.
+ *
+ * Note: when converting an unknown physical address to a
+ * struct page, the resulting pointer must be validated
+ * using VALID_PAGE().  It must return an invalid struct page
+ * for any physical address not corresponding to a system
+ * RAM address.
+ *
+ *  page_to_pfn(page)	convert a struct page * to a PFN number
+ *  pfn_to_page(pfn)	convert a _valid_ PFN number to struct page *
+ *  pfn_valid(pfn)	indicates whether a PFN number is valid
+ *
+ *  virt_to_page(k)	convert a _valid_ virtual address to struct page *
+ *  virt_addr_valid(k)	indicates whether a virtual address is valid
+ */
+#ifndef CONFIG_DISCONTIGMEM
+
+#define ARCH_PFN_OFFSET		PHYS_PFN_OFFSET
+
+#ifndef CONFIG_SPARSEMEM
+#define pfn_valid(pfn)		((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
+#endif
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory)
+
+#define PHYS_TO_NID(addr)	(0)
+
+#else /* CONFIG_DISCONTIGMEM */
+
+/*
+ * This is more complex.  We have a set of mem_map arrays spread
+ * around in memory.
+ */
+#include <linux/numa.h>
+
+#define arch_pfn_to_nid(pfn)	PFN_TO_NID(pfn)
+#define arch_local_page_offset(pfn, nid) LOCAL_MAP_NR((pfn) << PAGE_SHIFT)
+
+#define pfn_valid(pfn)						\
+	({							\
+		unsigned int nid = PFN_TO_NID(pfn);		\
+		int valid = nid < MAX_NUMNODES;			\
+		if (valid) {					\
+			pg_data_t *node = NODE_DATA(nid);	\
+			valid = (pfn - node->node_start_pfn) <	\
+				node->node_spanned_pages;	\
+		}						\
+		valid;						\
+	})
+
+#define virt_to_page(kaddr)					\
+	(ADDR_TO_MAPBASE(kaddr) + LOCAL_MAP_NR(kaddr))
+
+#define virt_addr_valid(kaddr)	(KVADDR_TO_NID(kaddr) < MAX_NUMNODES)
+
+/*
+ * Common discontigmem stuff.
+ *  PHYS_TO_NID is used by the ARM kernel/setup.c
+ */
+#define PHYS_TO_NID(addr)	PFN_TO_NID((addr) >> PAGE_SHIFT)
+
+/*
+ * Given a kaddr, ADDR_TO_MAPBASE finds the owning node of the memory
+ * and returns the mem_map of that node.
+ */
+#define ADDR_TO_MAPBASE(kaddr)	NODE_MEM_MAP(KVADDR_TO_NID(kaddr))
+
+/*
+ * Given a page frame number, find the owning node of the memory
+ * and returns the mem_map of that node.
+ */
+#define PFN_TO_MAPBASE(pfn)	NODE_MEM_MAP(PFN_TO_NID(pfn))
+
+#ifdef NODE_MEM_SIZE_BITS
+#define NODE_MEM_SIZE_MASK	((1 << NODE_MEM_SIZE_BITS) - 1)
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+#define KVADDR_TO_NID(addr) \
+	(((unsigned long)(addr) - PAGE_OFFSET) >> NODE_MEM_SIZE_BITS)
+
+/*
+ * Given a page frame number, convert it to a node id.
+ */
+#define PFN_TO_NID(pfn) \
+	(((pfn) - PHYS_PFN_OFFSET) >> (NODE_MEM_SIZE_BITS - PAGE_SHIFT))
+
+/*
+ * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
+ * and returns the index corresponding to the appropriate page in the
+ * node's mem_map.
+ */
+#define LOCAL_MAP_NR(addr) \
+	(((unsigned long)(addr) & NODE_MEM_SIZE_MASK) >> PAGE_SHIFT)
+
+#endif /* NODE_MEM_SIZE_BITS */
+
+#endif /* !CONFIG_DISCONTIGMEM */
+
+/*
+ * For BIO.  "will die".  Kill me when bio_to_phys() and bvec_to_phys() die.
+ */
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+/*
+ * Optional device DMA address remapping. Do _not_ use directly!
+ * We should really eliminate virt_to_bus() here - it's deprecated.
+ */
+#ifndef __arch_page_to_dma
+#define page_to_dma(dev, page)		((dma_addr_t)__virt_to_bus((unsigned long)page_address(page)))
+#define dma_to_virt(dev, addr)		((void *)__bus_to_virt(addr))
+#define virt_to_dma(dev, addr)		((dma_addr_t)__virt_to_bus((unsigned long)(addr)))
+#else
+#define page_to_dma(dev, page)		(__arch_page_to_dma(dev, page))
+#define dma_to_virt(dev, addr)		(__arch_dma_to_virt(dev, addr))
+#define virt_to_dma(dev, addr)		(__arch_virt_to_dma(dev, addr))
+#endif
+
+/*
+ * Optional coherency support.  Currently used only by selected
+ * Intel XSC3-based systems.
+ */
+#ifndef arch_is_coherent
+#define arch_is_coherent()		0
+#endif
+
+#endif
+
+#include <asm-generic/memory_model.h>
+
+#endif
diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/asm/mman.h
new file mode 100644
index 000000000000..54570d2e95b7
--- /dev/null
+++ b/arch/arm/include/asm/mman.h
@@ -0,0 +1,17 @@
+#ifndef __ARM_MMAN_H__
+#define __ARM_MMAN_H__
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#endif /* __ARM_MMAN_H__ */
diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h
new file mode 100644
index 000000000000..53099d4ee421
--- /dev/null
+++ b/arch/arm/include/asm/mmu.h
@@ -0,0 +1,33 @@
+#ifndef __ARM_MMU_H
+#define __ARM_MMU_H
+
+#ifdef CONFIG_MMU
+
+typedef struct {
+#ifdef CONFIG_CPU_HAS_ASID
+	unsigned int id;
+#endif
+	unsigned int kvm_seq;
+} mm_context_t;
+
+#ifdef CONFIG_CPU_HAS_ASID
+#define ASID(mm)	((mm)->context.id & 255)
+#else
+#define ASID(mm)	(0)
+#endif
+
+#else
+
+/*
+ * From nommu.h:
+ *  Copyright (C) 2002, David McCullough <davidm@snapgear.com>
+ *  modified for 2.6 by Hyok S. Choi <hyok.choi@samsung.com>
+ */
+typedef struct {
+	struct vm_list_struct	*vmlist;
+	unsigned long		end_brk;
+} mm_context_t;
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/mmu_context.h b/arch/arm/include/asm/mmu_context.h
new file mode 100644
index 000000000000..a301e446007f
--- /dev/null
+++ b/arch/arm/include/asm/mmu_context.h
@@ -0,0 +1,117 @@
+/*
+ *  arch/arm/include/asm/mmu_context.h
+ *
+ *  Copyright (C) 1996 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   27-06-1996	RMK	Created
+ */
+#ifndef __ASM_ARM_MMU_CONTEXT_H
+#define __ASM_ARM_MMU_CONTEXT_H
+
+#include <linux/compiler.h>
+#include <asm/cacheflush.h>
+#include <asm/proc-fns.h>
+#include <asm-generic/mm_hooks.h>
+
+void __check_kvm_seq(struct mm_struct *mm);
+
+#ifdef CONFIG_CPU_HAS_ASID
+
+/*
+ * On ARMv6, we have the following structure in the Context ID:
+ *
+ * 31                         7          0
+ * +-------------------------+-----------+
+ * |      process ID         |   ASID    |
+ * +-------------------------+-----------+
+ * |              context ID             |
+ * +-------------------------------------+
+ *
+ * The ASID is used to tag entries in the CPU caches and TLBs.
+ * The context ID is used by debuggers and trace logic, and
+ * should be unique within all running processes.
+ */
+#define ASID_BITS		8
+#define ASID_MASK		((~0) << ASID_BITS)
+#define ASID_FIRST_VERSION	(1 << ASID_BITS)
+
+extern unsigned int cpu_last_asid;
+
+void __init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+void __new_context(struct mm_struct *mm);
+
+static inline void check_context(struct mm_struct *mm)
+{
+	if (unlikely((mm->context.id ^ cpu_last_asid) >> ASID_BITS))
+		__new_context(mm);
+
+	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
+		__check_kvm_seq(mm);
+}
+
+#define init_new_context(tsk,mm)	(__init_new_context(tsk,mm),0)
+
+#else
+
+static inline void check_context(struct mm_struct *mm)
+{
+	if (unlikely(mm->context.kvm_seq != init_mm.context.kvm_seq))
+		__check_kvm_seq(mm);
+}
+
+#define init_new_context(tsk,mm)	0
+
+#endif
+
+#define destroy_context(mm)		do { } while(0)
+
+/*
+ * This is called when "tsk" is about to enter lazy TLB mode.
+ *
+ * mm:  describes the currently active mm context
+ * tsk: task which is entering lazy tlb
+ * cpu: cpu number which is entering lazy tlb
+ *
+ * tsk->mm will be NULL
+ */
+static inline void
+enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * This is the actual mm switch as far as the scheduler
+ * is concerned.  No registers are touched.  We avoid
+ * calling the CPU specific function when the mm hasn't
+ * actually changed.
+ */
+static inline void
+switch_mm(struct mm_struct *prev, struct mm_struct *next,
+	  struct task_struct *tsk)
+{
+#ifdef CONFIG_MMU
+	unsigned int cpu = smp_processor_id();
+
+#ifdef CONFIG_SMP
+	/* check for possible thread migration */
+	if (!cpus_empty(next->cpu_vm_mask) && !cpu_isset(cpu, next->cpu_vm_mask))
+		__flush_icache_all();
+#endif
+	if (!cpu_test_and_set(cpu, next->cpu_vm_mask) || prev != next) {
+		check_context(next);
+		cpu_switch_mm(next->pgd, next);
+		if (cache_is_vivt())
+			cpu_clear(cpu, prev->cpu_vm_mask);
+	}
+#endif
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+#define activate_mm(prev,next)	switch_mm(prev, next, NULL)
+
+#endif
diff --git a/arch/arm/include/asm/mmzone.h b/arch/arm/include/asm/mmzone.h
new file mode 100644
index 000000000000..ae63a4fd28c8
--- /dev/null
+++ b/arch/arm/include/asm/mmzone.h
@@ -0,0 +1,30 @@
+/*
+ *  arch/arm/include/asm/mmzone.h
+ *
+ *  1999-12-29	Nicolas Pitre		Created
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_MMZONE_H
+#define __ASM_MMZONE_H
+
+/*
+ * Currently defined in arch/arm/mm/discontig.c
+ */
+extern pg_data_t discontig_node_data[];
+
+/*
+ * Return a pointer to the node data for node n.
+ */
+#define NODE_DATA(nid)		(&discontig_node_data[nid])
+
+/*
+ * NODE_MEM_MAP gives the kaddr for the mem_map of the node.
+ */
+#define NODE_MEM_MAP(nid)	(NODE_DATA(nid)->node_mem_map)
+
+#include <mach/memory.h>
+
+#endif
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
new file mode 100644
index 000000000000..24b168dc31a3
--- /dev/null
+++ b/arch/arm/include/asm/module.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_ARM_MODULE_H
+#define _ASM_ARM_MODULE_H
+
+struct mod_arch_specific
+{
+	int foo;
+};
+
+#define Elf_Shdr	Elf32_Shdr
+#define Elf_Sym		Elf32_Sym
+#define Elf_Ehdr	Elf32_Ehdr
+
+/*
+ * Include the ARM architecture version.
+ */
+#define MODULE_ARCH_VERMAGIC	"ARMv" __stringify(__LINUX_ARM_ARCH__) " "
+
+#endif /* _ASM_ARM_MODULE_H */
diff --git a/arch/arm/include/asm/msgbuf.h b/arch/arm/include/asm/msgbuf.h
new file mode 100644
index 000000000000..33b35b946eaa
--- /dev/null
+++ b/arch/arm/include/asm/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _ASMARM_MSGBUF_H
+#define _ASMARM_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _ASMARM_MSGBUF_H */
diff --git a/arch/arm/include/asm/mtd-xip.h b/arch/arm/include/asm/mtd-xip.h
new file mode 100644
index 000000000000..4225372a26f3
--- /dev/null
+++ b/arch/arm/include/asm/mtd-xip.h
@@ -0,0 +1,26 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ * 
+ * Author:	Nicolas Pitre
+ * Created:	Nov 2, 2004
+ * Copyright:	(C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
+ */
+
+#ifndef __ARM_MTD_XIP_H__
+#define __ARM_MTD_XIP_H__
+
+#include <mach/hardware.h>
+#include <mach/mtd-xip.h>
+
+/* fill instruction prefetch */
+#define xip_iprefetch() 	do { asm volatile (".rep 8; nop; .endr"); } while (0)
+
+#endif /* __ARM_MTD_XIP_H__ */
diff --git a/arch/arm/include/asm/mutex.h b/arch/arm/include/asm/mutex.h
new file mode 100644
index 000000000000..93226cf23ae0
--- /dev/null
+++ b/arch/arm/include/asm/mutex.h
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/include/asm/mutex.h
+ *
+ * ARM optimized mutex locking primitives
+ *
+ * Please look into asm-generic/mutex-xchg.h for a formal definition.
+ */
+#ifndef _ASM_MUTEX_H
+#define _ASM_MUTEX_H
+
+#if __LINUX_ARM_ARCH__ < 6
+/* On pre-ARMv6 hardware the swp based implementation is the most efficient. */
+# include <asm-generic/mutex-xchg.h>
+#else
+
+/*
+ * Attempting to lock a mutex on ARMv6+ can be done with a bastardized
+ * atomic decrement (it is not a reliable atomic decrement but it satisfies
+ * the defined semantics for our purpose, while being smaller and faster
+ * than a real atomic decrement or atomic swap.  The idea is to attempt
+ * decrementing the lock value only once.  If once decremented it isn't zero,
+ * or if its store-back fails due to a dispute on the exclusive store, we
+ * simply bail out immediately through the slow path where the lock will be
+ * reattempted until it succeeds.
+ */
+static inline void
+__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+	int __ex_flag, __res;
+
+	__asm__ (
+
+		"ldrex	%0, [%2]	\n\t"
+		"sub	%0, %0, #1	\n\t"
+		"strex	%1, %0, [%2]	"
+
+		: "=&r" (__res), "=&r" (__ex_flag)
+		: "r" (&(count)->counter)
+		: "cc","memory" );
+
+	__res |= __ex_flag;
+	if (unlikely(__res != 0))
+		fail_fn(count);
+}
+
+static inline int
+__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+	int __ex_flag, __res;
+
+	__asm__ (
+
+		"ldrex	%0, [%2]	\n\t"
+		"sub	%0, %0, #1	\n\t"
+		"strex	%1, %0, [%2]	"
+
+		: "=&r" (__res), "=&r" (__ex_flag)
+		: "r" (&(count)->counter)
+		: "cc","memory" );
+
+	__res |= __ex_flag;
+	if (unlikely(__res != 0))
+		__res = fail_fn(count);
+	return __res;
+}
+
+/*
+ * Same trick is used for the unlock fast path. However the original value,
+ * rather than the result, is used to test for success in order to have
+ * better generated assembly.
+ */
+static inline void
+__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+	int __ex_flag, __res, __orig;
+
+	__asm__ (
+
+		"ldrex	%0, [%3]	\n\t"
+		"add	%1, %0, #1	\n\t"
+		"strex	%2, %1, [%3]	"
+
+		: "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
+		: "r" (&(count)->counter)
+		: "cc","memory" );
+
+	__orig |= __ex_flag;
+	if (unlikely(__orig != 0))
+		fail_fn(count);
+}
+
+/*
+ * If the unlock was done on a contended lock, or if the unlock simply fails
+ * then the mutex remains locked.
+ */
+#define __mutex_slowpath_needs_to_unlock()	1
+
+/*
+ * For __mutex_fastpath_trylock we use another construct which could be
+ * described as a "single value cmpxchg".
+ *
+ * This provides the needed trylock semantics like cmpxchg would, but it is
+ * lighter and less generic than a true cmpxchg implementation.
+ */
+static inline int
+__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+	int __ex_flag, __res, __orig;
+
+	__asm__ (
+
+		"1: ldrex	%0, [%3]	\n\t"
+		"subs		%1, %0, #1	\n\t"
+		"strexeq	%2, %1, [%3]	\n\t"
+		"movlt		%0, #0		\n\t"
+		"cmpeq		%2, #0		\n\t"
+		"bgt		1b		"
+
+		: "=&r" (__orig), "=&r" (__res), "=&r" (__ex_flag)
+		: "r" (&count->counter)
+		: "cc", "memory" );
+
+	return __orig;
+}
+
+#endif
+#endif
diff --git a/arch/arm/include/asm/nwflash.h b/arch/arm/include/asm/nwflash.h
new file mode 100644
index 000000000000..04e5a557a884
--- /dev/null
+++ b/arch/arm/include/asm/nwflash.h
@@ -0,0 +1,9 @@
+#ifndef _FLASH_H
+#define _FLASH_H
+
+#define FLASH_MINOR		 160	/* MAJOR is 10 - miscdevice */
+#define CMD_WRITE_DISABLE	 0
+#define CMD_WRITE_ENABLE	 0x28
+#define CMD_WRITE_BASE64K_ENABLE 0x47
+
+#endif /* _FLASH_H */
diff --git a/arch/arm/include/asm/page-nommu.h b/arch/arm/include/asm/page-nommu.h
new file mode 100644
index 000000000000..3574c0deb37f
--- /dev/null
+++ b/arch/arm/include/asm/page-nommu.h
@@ -0,0 +1,49 @@
+/*
+ *  arch/arm/include/asm/page-nommu.h
+ *
+ *  Copyright (C) 2004 Hyok S. Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASMARM_PAGE_NOMMU_H
+#define _ASMARM_PAGE_NOMMU_H
+
+#if !defined(CONFIG_SMALL_TASKS) && PAGE_SHIFT < 13
+#define KTHREAD_SIZE (8192)
+#else
+#define KTHREAD_SIZE PAGE_SIZE
+#endif
+ 
+#define get_user_page(vaddr)		__get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)	free_page(addr)
+
+#define clear_page(page)	memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from)	memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef unsigned long pte_t;
+typedef unsigned long pmd_t;
+typedef unsigned long pgd_t[2];
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)      (x)
+#define pmd_val(x)      (x)
+#define pgd_val(x)	((x)[0])
+#define pgprot_val(x)   (x)
+
+#define __pte(x)        (x)
+#define __pmd(x)        (x)
+#define __pgprot(x)     (x)
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif
diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h
new file mode 100644
index 000000000000..cf2e2680daaa
--- /dev/null
+++ b/arch/arm/include/asm/page.h
@@ -0,0 +1,199 @@
+/*
+ *  arch/arm/include/asm/page.h
+ *
+ *  Copyright (C) 1995-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PAGE_H
+#define _ASMARM_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT		12
+#define PAGE_SIZE		(1UL << PAGE_SHIFT)
+#define PAGE_MASK		(~(PAGE_SIZE-1))
+
+#ifndef __ASSEMBLY__
+
+#ifndef CONFIG_MMU
+
+#include "page-nommu.h"
+
+#else
+
+#include <asm/glue.h>
+
+/*
+ *	User Space Model
+ *	================
+ *
+ *	This section selects the correct set of functions for dealing with
+ *	page-based copying and clearing for user space for the particular
+ *	processor(s) we're building for.
+ *
+ *	We have the following to choose from:
+ *	  v3		- ARMv3
+ *	  v4wt		- ARMv4 with writethrough cache, without minicache
+ *	  v4wb		- ARMv4 with writeback cache, without minicache
+ *	  v4_mc		- ARMv4 with minicache
+ *	  xscale	- Xscale
+ *	  xsc3		- XScalev3
+ */
+#undef _USER
+#undef MULTI_USER
+
+#ifdef CONFIG_CPU_COPY_V3
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER v3
+# endif
+#endif
+
+#ifdef CONFIG_CPU_COPY_V4WT
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER v4wt
+# endif
+#endif
+
+#ifdef CONFIG_CPU_COPY_V4WB
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER v4wb
+# endif
+#endif
+
+#ifdef CONFIG_CPU_COPY_FEROCEON
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER feroceon
+# endif
+#endif
+
+#ifdef CONFIG_CPU_SA1100
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER v4_mc
+# endif
+#endif
+
+#ifdef CONFIG_CPU_XSCALE
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER xscale_mc
+# endif
+#endif
+
+#ifdef CONFIG_CPU_XSC3
+# ifdef _USER
+#  define MULTI_USER 1
+# else
+#  define _USER xsc3_mc
+# endif
+#endif
+
+#ifdef CONFIG_CPU_COPY_V6
+# define MULTI_USER 1
+#endif
+
+#if !defined(_USER) && !defined(MULTI_USER)
+#error Unknown user operations model
+#endif
+
+struct cpu_user_fns {
+	void (*cpu_clear_user_page)(void *p, unsigned long user);
+	void (*cpu_copy_user_page)(void *to, const void *from,
+				   unsigned long user);
+};
+
+#ifdef MULTI_USER
+extern struct cpu_user_fns cpu_user;
+
+#define __cpu_clear_user_page	cpu_user.cpu_clear_user_page
+#define __cpu_copy_user_page	cpu_user.cpu_copy_user_page
+
+#else
+
+#define __cpu_clear_user_page	__glue(_USER,_clear_user_page)
+#define __cpu_copy_user_page	__glue(_USER,_copy_user_page)
+
+extern void __cpu_clear_user_page(void *p, unsigned long user);
+extern void __cpu_copy_user_page(void *to, const void *from,
+				 unsigned long user);
+#endif
+
+#define clear_user_page(addr,vaddr,pg)	 __cpu_clear_user_page(addr, vaddr)
+#define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr)
+
+#define clear_page(page)	memzero((void *)(page), PAGE_SIZE)
+extern void copy_page(void *to, const void *from);
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd[2]; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)      ((x).pte)
+#define pmd_val(x)      ((x).pmd)
+#define pgd_val(x)	((x).pgd[0])
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pte_t;
+typedef unsigned long pmd_t;
+typedef unsigned long pgd_t[2];
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)      (x)
+#define pmd_val(x)      (x)
+#define pgd_val(x)	((x)[0])
+#define pgprot_val(x)   (x)
+
+#define __pte(x)        (x)
+#define __pmd(x)        (x)
+#define __pgprot(x)     (x)
+
+#endif /* STRICT_MM_TYPECHECKS */
+
+#endif /* CONFIG_MMU */
+
+typedef struct page *pgtable_t;
+
+#include <asm/memory.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+/*
+ * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
+ */
+#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
+#define ARCH_SLAB_MINALIGN 8
+#endif
+
+#include <asm-generic/page.h>
+
+#endif
diff --git a/arch/arm/include/asm/param.h b/arch/arm/include/asm/param.h
new file mode 100644
index 000000000000..8b24bf94c06b
--- /dev/null
+++ b/arch/arm/include/asm/param.h
@@ -0,0 +1,31 @@
+/*
+ *  arch/arm/include/asm/param.h
+ *
+ *  Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PARAM_H
+#define __ASM_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
+# define USER_HZ	100		/* User interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#else
+# define HZ		100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP         (-1)
+#endif
+
+/* max length of hostname */
+#define MAXHOSTNAMELEN  64
+
+#endif
+
diff --git a/arch/arm/include/asm/parport.h b/arch/arm/include/asm/parport.h
new file mode 100644
index 000000000000..26e94b09035a
--- /dev/null
+++ b/arch/arm/include/asm/parport.h
@@ -0,0 +1,18 @@
+/*
+ *  arch/arm/include/asm/parport.h: ARM-specific parport initialisation
+ *
+ *  Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef __ASMARM_PARPORT_H
+#define __ASMARM_PARPORT_H
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports (autoirq, autodma);
+}
+
+#endif /* !(_ASMARM_PARPORT_H) */
diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h
new file mode 100644
index 000000000000..721c03d53f4b
--- /dev/null
+++ b/arch/arm/include/asm/pci.h
@@ -0,0 +1,91 @@
+#ifndef ASMARM_PCI_H
+#define ASMARM_PCI_H
+
+#ifdef __KERNEL__
+#include <asm-generic/pci-dma-compat.h>
+
+#include <mach/hardware.h> /* for PCIBIOS_MIN_* */
+
+#define pcibios_scan_all_fns(a, b)	0
+
+#ifdef CONFIG_PCI_HOST_ITE8152
+/* ITE bridge requires setting latency timer to avoid early bus access
+   termination by PIC bus mater devices
+*/
+extern void pcibios_set_master(struct pci_dev *dev);
+#else
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+#endif
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/*
+ * The PCI address space does equal the physical memory address space.
+ * The networking and block device layers use this boolean for bounce
+ * buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (0)
+
+/*
+ * Whether pci_unmap_{single,page} is a nop depends upon the
+ * configuration.
+ */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)		((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)		((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	(((PTR)->LEN_NAME) = (VAL))
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+                               enum pci_mmap_state mmap_state, int write_combine);
+
+extern void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			 struct resource *res);
+
+extern void
+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+			struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+/*
+ * Dummy implementation; always return 0.
+ */
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return 0;
+}
+
+#endif /* __KERNEL__ */
+ 
+#endif
diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h
new file mode 100644
index 000000000000..b4e32d8ec072
--- /dev/null
+++ b/arch/arm/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARM_PERCPU
+#define __ARM_PERCPU
+
+#include <asm-generic/percpu.h>
+
+#endif
diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h
new file mode 100644
index 000000000000..3dcd64bf1824
--- /dev/null
+++ b/arch/arm/include/asm/pgalloc.h
@@ -0,0 +1,136 @@
+/*
+ *  arch/arm/include/asm/pgalloc.h
+ *
+ *  Copyright (C) 2000-2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGALLOC_H
+#define _ASMARM_PGALLOC_H
+
+#include <asm/domain.h>
+#include <asm/pgtable-hwdef.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+#define check_pgt_cache()		do { } while (0)
+
+#ifdef CONFIG_MMU
+
+#define _PAGE_USER_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_USER))
+#define _PAGE_KERNEL_TABLE	(PMD_TYPE_TABLE | PMD_BIT4 | PMD_DOMAIN(DOMAIN_KERNEL))
+
+/*
+ * Since we have only two-level page tables, these are trivial
+ */
+#define pmd_alloc_one(mm,addr)		({ BUG(); ((pmd_t *)2); })
+#define pmd_free(mm, pmd)		do { } while (0)
+#define pgd_populate(mm,pmd,pte)	BUG()
+
+extern pgd_t *get_pgd_slow(struct mm_struct *mm);
+extern void free_pgd_slow(struct mm_struct *mm, pgd_t *pgd);
+
+#define pgd_alloc(mm)			get_pgd_slow(mm)
+#define pgd_free(mm, pgd)		free_pgd_slow(mm, pgd)
+
+/*
+ * Allocate one PTE table.
+ *
+ * This actually allocates two hardware PTE tables, but we wrap this up
+ * into one table thus:
+ *
+ *  +------------+
+ *  |  h/w pt 0  |
+ *  +------------+
+ *  |  h/w pt 1  |
+ *  +------------+
+ *  | Linux pt 0 |
+ *  +------------+
+ *  | Linux pt 1 |
+ *  +------------+
+ */
+static inline pte_t *
+pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
+{
+	pte_t *pte;
+
+	pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+	if (pte) {
+		clean_dcache_area(pte, sizeof(pte_t) * PTRS_PER_PTE);
+		pte += PTRS_PER_PTE;
+	}
+
+	return pte;
+}
+
+static inline pgtable_t
+pte_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	struct page *pte;
+
+	pte = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+	if (pte) {
+		void *page = page_address(pte);
+		clean_dcache_area(page, sizeof(pte_t) * PTRS_PER_PTE);
+		pgtable_page_ctor(pte);
+	}
+
+	return pte;
+}
+
+/*
+ * Free one PTE table.
+ */
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	if (pte) {
+		pte -= PTRS_PER_PTE;
+		free_page((unsigned long)pte);
+	}
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	__free_page(pte);
+}
+
+static inline void __pmd_populate(pmd_t *pmdp, unsigned long pmdval)
+{
+	pmdp[0] = __pmd(pmdval);
+	pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t));
+	flush_pmd_entry(pmdp);
+}
+
+/*
+ * Populate the pmdp entry with a pointer to the pte.  This pmd is part
+ * of the mm address space.
+ *
+ * Ensure that we always set both PMD entries.
+ */
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep)
+{
+	unsigned long pte_ptr = (unsigned long)ptep;
+
+	/*
+	 * The pmd must be loaded with the physical
+	 * address of the PTE table
+	 */
+	pte_ptr -= PTRS_PER_PTE * sizeof(void *);
+	__pmd_populate(pmdp, __pa(pte_ptr) | _PAGE_KERNEL_TABLE);
+}
+
+static inline void
+pmd_populate(struct mm_struct *mm, pmd_t *pmdp, pgtable_t ptep)
+{
+	__pmd_populate(pmdp, page_to_pfn(ptep) << PAGE_SHIFT | _PAGE_USER_TABLE);
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+#endif /* CONFIG_MMU */
+
+#endif
diff --git a/arch/arm/include/asm/pgtable-hwdef.h b/arch/arm/include/asm/pgtable-hwdef.h
new file mode 100644
index 000000000000..fd1521d5cb9d
--- /dev/null
+++ b/arch/arm/include/asm/pgtable-hwdef.h
@@ -0,0 +1,90 @@
+/*
+ *  arch/arm/include/asm/pgtable-hwdef.h
+ *
+ *  Copyright (C) 1995-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGTABLE_HWDEF_H
+#define _ASMARM_PGTABLE_HWDEF_H
+
+/*
+ * Hardware page table definitions.
+ *
+ * + Level 1 descriptor (PMD)
+ *   - common
+ */
+#define PMD_TYPE_MASK		(3 << 0)
+#define PMD_TYPE_FAULT		(0 << 0)
+#define PMD_TYPE_TABLE		(1 << 0)
+#define PMD_TYPE_SECT		(2 << 0)
+#define PMD_BIT4		(1 << 4)
+#define PMD_DOMAIN(x)		((x) << 5)
+#define PMD_PROTECTION		(1 << 9)	/* v5 */
+/*
+ *   - section
+ */
+#define PMD_SECT_BUFFERABLE	(1 << 2)
+#define PMD_SECT_CACHEABLE	(1 << 3)
+#define PMD_SECT_XN		(1 << 4)	/* v6 */
+#define PMD_SECT_AP_WRITE	(1 << 10)
+#define PMD_SECT_AP_READ	(1 << 11)
+#define PMD_SECT_TEX(x)		((x) << 12)	/* v5 */
+#define PMD_SECT_APX		(1 << 15)	/* v6 */
+#define PMD_SECT_S		(1 << 16)	/* v6 */
+#define PMD_SECT_nG		(1 << 17)	/* v6 */
+#define PMD_SECT_SUPER		(1 << 18)	/* v6 */
+
+#define PMD_SECT_UNCACHED	(0)
+#define PMD_SECT_BUFFERED	(PMD_SECT_BUFFERABLE)
+#define PMD_SECT_WT		(PMD_SECT_CACHEABLE)
+#define PMD_SECT_WB		(PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
+#define PMD_SECT_MINICACHE	(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE)
+#define PMD_SECT_WBWA		(PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE)
+#define PMD_SECT_NONSHARED_DEV	(PMD_SECT_TEX(2))
+
+/*
+ *   - coarse table (not used)
+ */
+
+/*
+ * + Level 2 descriptor (PTE)
+ *   - common
+ */
+#define PTE_TYPE_MASK		(3 << 0)
+#define PTE_TYPE_FAULT		(0 << 0)
+#define PTE_TYPE_LARGE		(1 << 0)
+#define PTE_TYPE_SMALL		(2 << 0)
+#define PTE_TYPE_EXT		(3 << 0)	/* v5 */
+#define PTE_BUFFERABLE		(1 << 2)
+#define PTE_CACHEABLE		(1 << 3)
+
+/*
+ *   - extended small page/tiny page
+ */
+#define PTE_EXT_XN		(1 << 0)	/* v6 */
+#define PTE_EXT_AP_MASK		(3 << 4)
+#define PTE_EXT_AP0		(1 << 4)
+#define PTE_EXT_AP1		(2 << 4)
+#define PTE_EXT_AP_UNO_SRO	(0 << 4)
+#define PTE_EXT_AP_UNO_SRW	(PTE_EXT_AP0)
+#define PTE_EXT_AP_URO_SRW	(PTE_EXT_AP1)
+#define PTE_EXT_AP_URW_SRW	(PTE_EXT_AP1|PTE_EXT_AP0)
+#define PTE_EXT_TEX(x)		((x) << 6)	/* v5 */
+#define PTE_EXT_APX		(1 << 9)	/* v6 */
+#define PTE_EXT_COHERENT	(1 << 9)	/* XScale3 */
+#define PTE_EXT_SHARED		(1 << 10)	/* v6 */
+#define PTE_EXT_NG		(1 << 11)	/* v6 */
+
+/*
+ *   - small page
+ */
+#define PTE_SMALL_AP_MASK	(0xff << 4)
+#define PTE_SMALL_AP_UNO_SRO	(0x00 << 4)
+#define PTE_SMALL_AP_UNO_SRW	(0x55 << 4)
+#define PTE_SMALL_AP_URO_SRW	(0xaa << 4)
+#define PTE_SMALL_AP_URW_SRW	(0xff << 4)
+
+#endif
diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h
new file mode 100644
index 000000000000..b011f2e939aa
--- /dev/null
+++ b/arch/arm/include/asm/pgtable-nommu.h
@@ -0,0 +1,118 @@
+/*
+ *  arch/arm/include/asm/pgtable-nommu.h
+ *
+ *  Copyright (C) 1995-2002 Russell King
+ *  Copyright (C) 2004  Hyok S. Choi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGTABLE_NOMMU_H
+#define _ASMARM_PGTABLE_NOMMU_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/slab.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+
+/*
+ * Trivial page table functions.
+ */
+#define pgd_present(pgd)	(1)
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr)	(1)
+#define	pmd_offset(a, b)	((void *)0)
+/* FIXME */
+/*
+ * PMD_SHIFT determines the size of the area a second-level page table can map
+ * PGDIR_SHIFT determines what a third-level page table entry can map
+ */
+#define PGDIR_SHIFT		21
+
+#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE-1))
+/* FIXME */
+
+#define PAGE_NONE	__pgprot(0)
+#define PAGE_SHARED	__pgprot(0)
+#define PAGE_COPY	__pgprot(0)
+#define PAGE_READONLY	__pgprot(0)
+#define PAGE_KERNEL	__pgprot(0)
+
+#define swapper_pg_dir ((pgd_t *) 0)
+
+#define __swp_type(x)		(0)
+#define __swp_offset(x)		(0)
+#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+
+typedef pte_t *pte_addr_t;
+
+static inline int pte_file(pte_t pte) { return 0; }
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr)	(virt_to_page(0))
+
+/*
+ * Mark the prot value as uncacheable and unbufferable.
+ */
+#define pgprot_noncached(prot)	__pgprot(0)
+#define pgprot_writecombine(prot) __pgprot(0)
+
+
+/*
+ * These would be in other places but having them here reduces the diffs.
+ */
+extern unsigned int kobjsize(const void *objp);
+
+/*
+ * No page table caches to initialise.
+ */
+#define pgtable_cache_init()	do { } while (0)
+#define io_remap_page_range	remap_page_range
+#define io_remap_pfn_range	remap_pfn_range
+
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define	VMALLOC_START	0
+#define	VMALLOC_END	0xffffffff
+
+#define FIRST_USER_ADDRESS      (0)
+
+#include <asm-generic/pgtable.h>
+
+#else 
+
+/*
+ * dummy tlb and user structures.
+ */
+#define v3_tlb_fns	(0)
+#define v4_tlb_fns	(0)
+#define v4wb_tlb_fns	(0)
+#define v4wbi_tlb_fns	(0)
+#define v6wbi_tlb_fns	(0)
+#define v7wbi_tlb_fns	(0)
+
+#define v3_user_fns	(0)
+#define v4_user_fns	(0)
+#define v4_mc_user_fns	(0)
+#define v4wb_user_fns	(0)
+#define v4wt_user_fns	(0)
+#define v6_user_fns	(0)
+#define xscale_mc_user_fns (0)
+
+#endif /*__ASSEMBLY__*/
+
+#endif /* _ASMARM_PGTABLE_H */
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
new file mode 100644
index 000000000000..8e21ef15bd74
--- /dev/null
+++ b/arch/arm/include/asm/pgtable.h
@@ -0,0 +1,401 @@
+/*
+ *  arch/arm/include/asm/pgtable.h
+ *
+ *  Copyright (C) 1995-2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_PGTABLE_H
+#define _ASMARM_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+#include <asm/proc-fns.h>
+
+#ifndef CONFIG_MMU
+
+#include "pgtable-nommu.h"
+
+#else
+
+#include <asm/memory.h>
+#include <mach/vmalloc.h>
+#include <asm/pgtable-hwdef.h>
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ *
+ * Note that platforms may override VMALLOC_START, but they must provide
+ * VMALLOC_END.  VMALLOC_END defines the (exclusive) limit of this space,
+ * which may not overlap IO space.
+ */
+#ifndef VMALLOC_START
+#define VMALLOC_OFFSET		(8*1024*1024)
+#define VMALLOC_START		(((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#endif
+
+/*
+ * Hardware-wise, we have a two level page table structure, where the first
+ * level has 4096 entries, and the second level has 256 entries.  Each entry
+ * is one 32-bit word.  Most of the bits in the second level entry are used
+ * by hardware, and there aren't any "accessed" and "dirty" bits.
+ *
+ * Linux on the other hand has a three level page table structure, which can
+ * be wrapped to fit a two level page table structure easily - using the PGD
+ * and PTE only.  However, Linux also expects one "PTE" table per page, and
+ * at least a "dirty" bit.
+ *
+ * Therefore, we tweak the implementation slightly - we tell Linux that we
+ * have 2048 entries in the first level, each of which is 8 bytes (iow, two
+ * hardware pointers to the second level.)  The second level contains two
+ * hardware PTE tables arranged contiguously, followed by Linux versions
+ * which contain the state information Linux needs.  We, therefore, end up
+ * with 512 entries in the "PTE" level.
+ *
+ * This leads to the page tables having the following layout:
+ *
+ *    pgd             pte
+ * |        |
+ * +--------+ +0
+ * |        |-----> +------------+ +0
+ * +- - - - + +4    |  h/w pt 0  |
+ * |        |-----> +------------+ +1024
+ * +--------+ +8    |  h/w pt 1  |
+ * |        |       +------------+ +2048
+ * +- - - - +       | Linux pt 0 |
+ * |        |       +------------+ +3072
+ * +--------+       | Linux pt 1 |
+ * |        |       +------------+ +4096
+ *
+ * See L_PTE_xxx below for definitions of bits in the "Linux pt", and
+ * PTE_xxx for definitions of bits appearing in the "h/w pt".
+ *
+ * PMD_xxx definitions refer to bits in the first level page table.
+ *
+ * The "dirty" bit is emulated by only granting hardware write permission
+ * iff the page is marked "writable" and "dirty" in the Linux PTE.  This
+ * means that a write to a clean page will cause a permission fault, and
+ * the Linux MM layer will mark the page dirty via handle_pte_fault().
+ * For the hardware to notice the permission change, the TLB entry must
+ * be flushed, and ptep_set_access_flags() does that for us.
+ *
+ * The "accessed" or "young" bit is emulated by a similar method; we only
+ * allow accesses to the page if the "young" bit is set.  Accesses to the
+ * page will cause a fault, and handle_pte_fault() will set the young bit
+ * for us as long as the page is marked present in the corresponding Linux
+ * PTE entry.  Again, ptep_set_access_flags() will ensure that the TLB is
+ * up to date.
+ *
+ * However, when the "young" bit is cleared, we deny access to the page
+ * by clearing the hardware PTE.  Currently Linux does not flush the TLB
+ * for us in this case, which means the TLB will retain the transation
+ * until either the TLB entry is evicted under pressure, or a context
+ * switch which changes the user space mapping occurs.
+ */
+#define PTRS_PER_PTE		512
+#define PTRS_PER_PMD		1
+#define PTRS_PER_PGD		2048
+
+/*
+ * PMD_SHIFT determines the size of the area a second-level page table can map
+ * PGDIR_SHIFT determines what a third-level page table entry can map
+ */
+#define PMD_SHIFT		21
+#define PGDIR_SHIFT		21
+
+#define LIBRARY_TEXT_START	0x0c000000
+
+#ifndef __ASSEMBLY__
+extern void __pte_error(const char *file, int line, unsigned long val);
+extern void __pmd_error(const char *file, int line, unsigned long val);
+extern void __pgd_error(const char *file, int line, unsigned long val);
+
+#define pte_ERROR(pte)		__pte_error(__FILE__, __LINE__, pte_val(pte))
+#define pmd_ERROR(pmd)		__pmd_error(__FILE__, __LINE__, pmd_val(pmd))
+#define pgd_ERROR(pgd)		__pgd_error(__FILE__, __LINE__, pgd_val(pgd))
+#endif /* !__ASSEMBLY__ */
+
+#define PMD_SIZE		(1UL << PMD_SHIFT)
+#define PMD_MASK		(~(PMD_SIZE-1))
+#define PGDIR_SIZE		(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE-1))
+
+/*
+ * This is the lowest virtual address we can permit any user space
+ * mapping to be mapped at.  This is particularly important for
+ * non-high vector CPUs.
+ */
+#define FIRST_USER_ADDRESS	PAGE_SIZE
+
+#define FIRST_USER_PGD_NR	1
+#define USER_PTRS_PER_PGD	((TASK_SIZE/PGDIR_SIZE) - FIRST_USER_PGD_NR)
+
+/*
+ * section address mask and size definitions.
+ */
+#define SECTION_SHIFT		20
+#define SECTION_SIZE		(1UL << SECTION_SHIFT)
+#define SECTION_MASK		(~(SECTION_SIZE-1))
+
+/*
+ * ARMv6 supersection address mask and size definitions.
+ */
+#define SUPERSECTION_SHIFT	24
+#define SUPERSECTION_SIZE	(1UL << SUPERSECTION_SHIFT)
+#define SUPERSECTION_MASK	(~(SUPERSECTION_SIZE-1))
+
+/*
+ * "Linux" PTE definitions.
+ *
+ * We keep two sets of PTEs - the hardware and the linux version.
+ * This allows greater flexibility in the way we map the Linux bits
+ * onto the hardware tables, and allows us to have YOUNG and DIRTY
+ * bits.
+ *
+ * The PTE table pointer refers to the hardware entries; the "Linux"
+ * entries are stored 1024 bytes below.
+ */
+#define L_PTE_PRESENT		(1 << 0)
+#define L_PTE_FILE		(1 << 1)	/* only when !PRESENT */
+#define L_PTE_YOUNG		(1 << 1)
+#define L_PTE_BUFFERABLE	(1 << 2)	/* matches PTE */
+#define L_PTE_CACHEABLE		(1 << 3)	/* matches PTE */
+#define L_PTE_USER		(1 << 4)
+#define L_PTE_WRITE		(1 << 5)
+#define L_PTE_EXEC		(1 << 6)
+#define L_PTE_DIRTY		(1 << 7)
+#define L_PTE_SHARED		(1 << 10)	/* shared(v6), coherent(xsc3) */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The pgprot_* and protection_map entries will be fixed up in runtime
+ * to include the cachable and bufferable bits based on memory policy,
+ * as well as any architecture dependent bits like global/ASID and SMP
+ * shared mapping bits.
+ */
+#define _L_PTE_DEFAULT	L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_CACHEABLE | L_PTE_BUFFERABLE
+#define _L_PTE_READ	L_PTE_USER | L_PTE_EXEC
+
+extern pgprot_t		pgprot_user;
+extern pgprot_t		pgprot_kernel;
+
+#define PAGE_NONE	pgprot_user
+#define PAGE_COPY	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
+#define PAGE_SHARED	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ | \
+				 L_PTE_WRITE)
+#define PAGE_READONLY	__pgprot(pgprot_val(pgprot_user) | _L_PTE_READ)
+#define PAGE_KERNEL	pgprot_kernel
+
+#define __PAGE_NONE	__pgprot(_L_PTE_DEFAULT)
+#define __PAGE_COPY	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
+#define __PAGE_SHARED	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ | L_PTE_WRITE)
+#define __PAGE_READONLY	__pgprot(_L_PTE_DEFAULT | _L_PTE_READ)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The table below defines the page protection levels that we insert into our
+ * Linux page table version.  These get translated into the best that the
+ * architecture can perform.  Note that on most ARM hardware:
+ *  1) We cannot do execute protection
+ *  2) If we could do execute protection, then read is implied
+ *  3) write implies read permissions
+ */
+#define __P000  __PAGE_NONE
+#define __P001  __PAGE_READONLY
+#define __P010  __PAGE_COPY
+#define __P011  __PAGE_COPY
+#define __P100  __PAGE_READONLY
+#define __P101  __PAGE_READONLY
+#define __P110  __PAGE_COPY
+#define __P111  __PAGE_COPY
+
+#define __S000  __PAGE_NONE
+#define __S001  __PAGE_READONLY
+#define __S010  __PAGE_SHARED
+#define __S011  __PAGE_SHARED
+#define __S100  __PAGE_READONLY
+#define __S101  __PAGE_READONLY
+#define __S110  __PAGE_SHARED
+#define __S111  __PAGE_SHARED
+
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr)	(empty_zero_page)
+
+#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
+#define pfn_pte(pfn,prot)	(__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)))
+
+#define pte_none(pte)		(!pte_val(pte))
+#define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
+#define pte_page(pte)		(pfn_to_page(pte_pfn(pte)))
+#define pte_offset_kernel(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
+#define pte_offset_map(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
+#define pte_offset_map_nested(dir,addr)	(pmd_page_vaddr(*(dir)) + __pte_index(addr))
+#define pte_unmap(pte)		do { } while (0)
+#define pte_unmap_nested(pte)	do { } while (0)
+
+#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
+
+#define set_pte_at(mm,addr,ptep,pteval) do { \
+	set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \
+ } while (0)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
+#define pte_write(pte)		(pte_val(pte) & L_PTE_WRITE)
+#define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
+#define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
+#define pte_special(pte)	(0)
+
+/*
+ * The following only works if pte_present() is not true.
+ */
+#define pte_file(pte)		(pte_val(pte) & L_PTE_FILE)
+#define pte_to_pgoff(x)		(pte_val(x) >> 2)
+#define pgoff_to_pte(x)		__pte(((x) << 2) | L_PTE_FILE)
+
+#define PTE_FILE_MAX_BITS	30
+
+#define PTE_BIT_FUNC(fn,op) \
+static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
+
+PTE_BIT_FUNC(wrprotect, &= ~L_PTE_WRITE);
+PTE_BIT_FUNC(mkwrite,   |= L_PTE_WRITE);
+PTE_BIT_FUNC(mkclean,   &= ~L_PTE_DIRTY);
+PTE_BIT_FUNC(mkdirty,   |= L_PTE_DIRTY);
+PTE_BIT_FUNC(mkold,     &= ~L_PTE_YOUNG);
+PTE_BIT_FUNC(mkyoung,   |= L_PTE_YOUNG);
+
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+/*
+ * Mark the prot value as uncacheable and unbufferable.
+ */
+#define pgprot_noncached(prot)	__pgprot(pgprot_val(prot) & ~(L_PTE_CACHEABLE | L_PTE_BUFFERABLE))
+#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~L_PTE_CACHEABLE)
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define pmd_present(pmd)	(pmd_val(pmd))
+#define pmd_bad(pmd)		(pmd_val(pmd) & 2)
+
+#define copy_pmd(pmdpd,pmdps)		\
+	do {				\
+		pmdpd[0] = pmdps[0];	\
+		pmdpd[1] = pmdps[1];	\
+		flush_pmd_entry(pmdpd);	\
+	} while (0)
+
+#define pmd_clear(pmdp)			\
+	do {				\
+		pmdp[0] = __pmd(0);	\
+		pmdp[1] = __pmd(0);	\
+		clean_pmd_entry(pmdp);	\
+	} while (0)
+
+static inline pte_t *pmd_page_vaddr(pmd_t pmd)
+{
+	unsigned long ptr;
+
+	ptr = pmd_val(pmd) & ~(PTRS_PER_PTE * sizeof(void *) - 1);
+	ptr += PTRS_PER_PTE * sizeof(void *);
+
+	return __va(ptr);
+}
+
+#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
+
+/*
+ * Permanent address of a page. We never have highmem, so this is trivial.
+ */
+#define pages_to_mb(x)		((x) >> (20 - PAGE_SHIFT))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page,prot)	pfn_pte(page_to_pfn(page),prot)
+
+/*
+ * The "pgd_xxx()" functions here are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ */
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_present(pgd)	(1)
+#define pgd_clear(pgdp)		do { } while (0)
+#define set_pgd(pgd,pgdp)	do { } while (0)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(addr)		((addr) >> PGDIR_SHIFT)
+
+#define pgd_offset(mm, addr)	((mm)->pgd+pgd_index(addr))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(dir, addr)	((pmd_t *)(dir))
+
+/* Find an entry in the third-level page table.. */
+#define __pte_index(addr)	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	const unsigned long mask = L_PTE_EXEC | L_PTE_WRITE | L_PTE_USER;
+	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
+	return pte;
+}
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+
+/* Encode and decode a swap entry.
+ *
+ * We support up to 32GB of swap on 4k machines
+ */
+#define __swp_type(x)		(((x).val >> 2) & 0x7f)
+#define __swp_offset(x)		((x).val >> 9)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(swp)	((pte_t) { (swp).val })
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+/* FIXME: this is not correct */
+#define kern_addr_valid(addr)	(1)
+
+#include <asm-generic/pgtable.h>
+
+/*
+ * We provide our own arch_get_unmapped_area to cope with VIPT caches.
+ */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * remap a physical page `pfn' of size `size' with page protection `prot'
+ * into virtual address `from'
+ */
+#define io_remap_pfn_range(vma,from,pfn,size,prot) \
+		remap_pfn_range(vma, from, pfn, size, prot)
+
+#define pgtable_cache_init() do { } while (0)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_MMU */
+
+#endif /* _ASMARM_PGTABLE_H */
diff --git a/arch/arm/include/asm/poll.h b/arch/arm/include/asm/poll.h
new file mode 100644
index 000000000000..c98509d3149e
--- /dev/null
+++ b/arch/arm/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/asm/posix_types.h
new file mode 100644
index 000000000000..2446d23bfdbf
--- /dev/null
+++ b/arch/arm/include/asm/posix_types.h
@@ -0,0 +1,77 @@
+/*
+ *  arch/arm/include/asm/posix_types.h
+ *
+ *  Copyright (C) 1996-1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   27-06-1996	RMK	Created
+ */
+#ifndef __ARCH_ARM_POSIX_TYPES_H
+#define __ARCH_ARM_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long		__kernel_ino_t;
+typedef unsigned short		__kernel_mode_t;
+typedef unsigned short		__kernel_nlink_t;
+typedef long			__kernel_off_t;
+typedef int			__kernel_pid_t;
+typedef unsigned short		__kernel_ipc_pid_t;
+typedef unsigned short		__kernel_uid_t;
+typedef unsigned short		__kernel_gid_t;
+typedef unsigned int		__kernel_size_t;
+typedef int			__kernel_ssize_t;
+typedef int			__kernel_ptrdiff_t;
+typedef long			__kernel_time_t;
+typedef long			__kernel_suseconds_t;
+typedef long			__kernel_clock_t;
+typedef int			__kernel_timer_t;
+typedef int			__kernel_clockid_t;
+typedef int			__kernel_daddr_t;
+typedef char *			__kernel_caddr_t;
+typedef unsigned short		__kernel_uid16_t;
+typedef unsigned short		__kernel_gid16_t;
+typedef unsigned int		__kernel_uid32_t;
+typedef unsigned int		__kernel_gid32_t;
+
+typedef unsigned short		__kernel_old_uid_t;
+typedef unsigned short		__kernel_old_gid_t;
+typedef unsigned short		__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long		__kernel_loff_t;
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef	__FD_SET
+#define __FD_SET(fd, fdsetp) \
+		(((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] |= (1<<((fd) & 31)))
+
+#undef	__FD_CLR
+#define __FD_CLR(fd, fdsetp) \
+		(((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] &= ~(1<<((fd) & 31)))
+
+#undef	__FD_ISSET
+#define __FD_ISSET(fd, fdsetp) \
+		((((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] & (1<<((fd) & 31))) != 0)
+
+#undef	__FD_ZERO
+#define __FD_ZERO(fdsetp) \
+		(memset (fdsetp, 0, sizeof (*(fd_set *)(fdsetp))))
+
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
new file mode 100644
index 000000000000..db80203b68e0
--- /dev/null
+++ b/arch/arm/include/asm/proc-fns.h
@@ -0,0 +1,241 @@
+/*
+ *  arch/arm/include/asm/proc-fns.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PROCFNS_H
+#define __ASM_PROCFNS_H
+
+#ifdef __KERNEL__
+
+
+/*
+ * Work out if we need multiple CPU support
+ */
+#undef MULTI_CPU
+#undef CPU_NAME
+
+/*
+ * CPU_NAME - the prefix for CPU related functions
+ */
+
+#ifdef CONFIG_CPU_32
+# ifdef CONFIG_CPU_ARM610
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm6
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM7TDMI
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm7tdmi
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM710
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm7
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM720T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm720
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM740T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm740
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM9TDMI
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm9tdmi
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM920T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm920
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM922T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm922
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM925T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm925
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM926T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm926
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM940T
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm940
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM946E
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm946
+#  endif
+# endif
+# ifdef CONFIG_CPU_SA110
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_sa110
+#  endif
+# endif
+# ifdef CONFIG_CPU_SA1100
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_sa1100
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM1020
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm1020
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM1020E
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm1020e
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM1022
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm1022
+#  endif
+# endif
+# ifdef CONFIG_CPU_ARM1026
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_arm1026
+#  endif
+# endif
+# ifdef CONFIG_CPU_XSCALE
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_xscale
+#  endif
+# endif
+# ifdef CONFIG_CPU_XSC3
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_xsc3
+#  endif
+# endif
+# ifdef CONFIG_CPU_FEROCEON
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_feroceon
+#  endif
+# endif
+# ifdef CONFIG_CPU_V6
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_v6
+#  endif
+# endif
+# ifdef CONFIG_CPU_V7
+#  ifdef CPU_NAME
+#   undef  MULTI_CPU
+#   define MULTI_CPU
+#  else
+#   define CPU_NAME cpu_v7
+#  endif
+# endif
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifndef MULTI_CPU
+#include <asm/cpu-single.h>
+#else
+#include <asm/cpu-multi32.h>
+#endif
+
+#include <asm/memory.h>
+
+#ifdef CONFIG_MMU
+
+#define cpu_switch_mm(pgd,mm) cpu_do_switch_mm(virt_to_phys(pgd),mm)
+
+#define cpu_get_pgd()	\
+	({						\
+		unsigned long pg;			\
+		__asm__("mrc	p15, 0, %0, c2, c0, 0"	\
+			 : "=r" (pg) : : "cc");		\
+		pg &= ~0x3fff;				\
+		(pgd_t *)phys_to_virt(pg);		\
+	})
+
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* __ASM_PROCFNS_H */
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
new file mode 100644
index 000000000000..b01d5e7e3d5a
--- /dev/null
+++ b/arch/arm/include/asm/processor.h
@@ -0,0 +1,131 @@
+/*
+ *  arch/arm/include/asm/processor.h
+ *
+ *  Copyright (C) 1995-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_PROCESSOR_H
+#define __ASM_ARM_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+#ifdef __KERNEL__
+#define STACK_TOP	((current->personality == PER_LINUX_32BIT) ? \
+			 TASK_SIZE : TASK_SIZE_26)
+#define STACK_TOP_MAX	TASK_SIZE
+#endif
+
+union debug_insn {
+	u32	arm;
+	u16	thumb;
+};
+
+struct debug_entry {
+	u32			address;
+	union debug_insn	insn;
+};
+
+struct debug_info {
+	int			nsaved;
+	struct debug_entry	bp[2];
+};
+
+struct thread_struct {
+							/* fault info	  */
+	unsigned long		address;
+	unsigned long		trap_no;
+	unsigned long		error_code;
+							/* debugging	  */
+	struct debug_info	debug;
+};
+
+#define INIT_THREAD  {	}
+
+#ifdef CONFIG_MMU
+#define nommu_start_thread(regs) do { } while (0)
+#else
+#define nommu_start_thread(regs) regs->ARM_r10 = current->mm->start_data
+#endif
+
+#define start_thread(regs,pc,sp)					\
+({									\
+	unsigned long *stack = (unsigned long *)sp;			\
+	set_fs(USER_DS);						\
+	memzero(regs->uregs, sizeof(regs->uregs));			\
+	if (current->personality & ADDR_LIMIT_32BIT)			\
+		regs->ARM_cpsr = USR_MODE;				\
+	else								\
+		regs->ARM_cpsr = USR26_MODE;				\
+	if (elf_hwcap & HWCAP_THUMB && pc & 1)				\
+		regs->ARM_cpsr |= PSR_T_BIT;				\
+	regs->ARM_pc = pc & ~1;		/* pc */			\
+	regs->ARM_sp = sp;		/* sp */			\
+	regs->ARM_r2 = stack[2];	/* r2 (envp) */			\
+	regs->ARM_r1 = stack[1];	/* r1 (argv) */			\
+	regs->ARM_r0 = stack[0];	/* r0 (argc) */			\
+	nommu_start_thread(regs);					\
+})
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define cpu_relax()			barrier()
+
+/*
+ * Create a new kernel thread
+ */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+#define task_pt_regs(p) \
+	((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1)
+
+#define KSTK_EIP(tsk)	task_pt_regs(tsk)->ARM_pc
+#define KSTK_ESP(tsk)	task_pt_regs(tsk)->ARM_sp
+
+/*
+ * Prefetching support - only ARMv5.
+ */
+#if __LINUX_ARM_ARCH__ >= 5
+
+#define ARCH_HAS_PREFETCH
+static inline void prefetch(const void *ptr)
+{
+	__asm__ __volatile__(
+		"pld\t%0"
+		:
+		: "o" (*(char *)ptr)
+		: "cc");
+}
+
+#define ARCH_HAS_PREFETCHW
+#define prefetchw(ptr)	prefetch(ptr)
+
+#define ARCH_HAS_SPINLOCK_PREFETCH
+#define spin_lock_prefetch(x) do { } while (0)
+
+#endif
+
+#endif
+
+#endif /* __ASM_ARM_PROCESSOR_H */
diff --git a/arch/arm/include/asm/procinfo.h b/arch/arm/include/asm/procinfo.h
new file mode 100644
index 000000000000..ca52e584ef74
--- /dev/null
+++ b/arch/arm/include/asm/procinfo.h
@@ -0,0 +1,49 @@
+/*
+ *  arch/arm/include/asm/procinfo.h
+ *
+ *  Copyright (C) 1996-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_PROCINFO_H
+#define __ASM_PROCINFO_H
+
+#ifdef __KERNEL__
+
+struct cpu_tlb_fns;
+struct cpu_user_fns;
+struct cpu_cache_fns;
+struct processor;
+
+/*
+ * Note!  struct processor is always defined if we're
+ * using MULTI_CPU, otherwise this entry is unused,
+ * but still exists.
+ *
+ * NOTE! The following structure is defined by assembly
+ * language, NOT C code.  For more information, check:
+ *  arch/arm/mm/proc-*.S and arch/arm/kernel/head.S
+ */
+struct proc_info_list {
+	unsigned int		cpu_val;
+	unsigned int		cpu_mask;
+	unsigned long		__cpu_mm_mmu_flags;	/* used by head.S */
+	unsigned long		__cpu_io_mmu_flags;	/* used by head.S */
+	unsigned long		__cpu_flush;		/* used by head.S */
+	const char		*arch_name;
+	const char		*elf_name;
+	unsigned int		elf_hwcap;
+	const char		*cpu_name;
+	struct processor	*proc;
+	struct cpu_tlb_fns	*tlb;
+	struct cpu_user_fns	*user;
+	struct cpu_cache_fns	*cache;
+};
+
+#else	/* __KERNEL__ */
+#include <asm/elf.h>
+#warning "Please include asm/elf.h instead"
+#endif	/* __KERNEL__ */
+#endif
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
new file mode 100644
index 000000000000..b415c0e85458
--- /dev/null
+++ b/arch/arm/include/asm/ptrace.h
@@ -0,0 +1,162 @@
+/*
+ *  arch/arm/include/asm/ptrace.h
+ *
+ *  Copyright (C) 1996-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_PTRACE_H
+#define __ASM_ARM_PTRACE_H
+
+#include <asm/hwcap.h>
+
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+#define PTRACE_GETFPREGS	14
+#define PTRACE_SETFPREGS	15
+/* PTRACE_ATTACH is 16 */
+/* PTRACE_DETACH is 17 */
+#define PTRACE_GETWMMXREGS	18
+#define PTRACE_SETWMMXREGS	19
+/* 20 is unused */
+#define PTRACE_OLDSETOPTIONS	21
+#define PTRACE_GET_THREAD_AREA	22
+#define PTRACE_SET_SYSCALL	23
+/* PTRACE_SYSCALL is 24 */
+#define PTRACE_GETCRUNCHREGS	25
+#define PTRACE_SETCRUNCHREGS	26
+
+/*
+ * PSR bits
+ */
+#define USR26_MODE	0x00000000
+#define FIQ26_MODE	0x00000001
+#define IRQ26_MODE	0x00000002
+#define SVC26_MODE	0x00000003
+#define USR_MODE	0x00000010
+#define FIQ_MODE	0x00000011
+#define IRQ_MODE	0x00000012
+#define SVC_MODE	0x00000013
+#define ABT_MODE	0x00000017
+#define UND_MODE	0x0000001b
+#define SYSTEM_MODE	0x0000001f
+#define MODE32_BIT	0x00000010
+#define MODE_MASK	0x0000001f
+#define PSR_T_BIT	0x00000020
+#define PSR_F_BIT	0x00000040
+#define PSR_I_BIT	0x00000080
+#define PSR_A_BIT	0x00000100
+#define PSR_J_BIT	0x01000000
+#define PSR_Q_BIT	0x08000000
+#define PSR_V_BIT	0x10000000
+#define PSR_C_BIT	0x20000000
+#define PSR_Z_BIT	0x40000000
+#define PSR_N_BIT	0x80000000
+#define PCMASK		0
+
+/*
+ * Groups of PSR bits
+ */
+#define PSR_f		0xff000000	/* Flags		*/
+#define PSR_s		0x00ff0000	/* Status		*/
+#define PSR_x		0x0000ff00	/* Extension		*/
+#define PSR_c		0x000000ff	/* Control		*/
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are stored on the
+ * stack during a system call.  Note that sizeof(struct pt_regs)
+ * has to be a multiple of 8.
+ */
+struct pt_regs {
+	long uregs[18];
+};
+
+#define ARM_cpsr	uregs[16]
+#define ARM_pc		uregs[15]
+#define ARM_lr		uregs[14]
+#define ARM_sp		uregs[13]
+#define ARM_ip		uregs[12]
+#define ARM_fp		uregs[11]
+#define ARM_r10		uregs[10]
+#define ARM_r9		uregs[9]
+#define ARM_r8		uregs[8]
+#define ARM_r7		uregs[7]
+#define ARM_r6		uregs[6]
+#define ARM_r5		uregs[5]
+#define ARM_r4		uregs[4]
+#define ARM_r3		uregs[3]
+#define ARM_r2		uregs[2]
+#define ARM_r1		uregs[1]
+#define ARM_r0		uregs[0]
+#define ARM_ORIG_r0	uregs[17]
+
+#ifdef __KERNEL__
+
+#define user_mode(regs)	\
+	(((regs)->ARM_cpsr & 0xf) == 0)
+
+#ifdef CONFIG_ARM_THUMB
+#define thumb_mode(regs) \
+	(((regs)->ARM_cpsr & PSR_T_BIT))
+#else
+#define thumb_mode(regs) (0)
+#endif
+
+#define isa_mode(regs) \
+	((((regs)->ARM_cpsr & PSR_J_BIT) >> 23) | \
+	 (((regs)->ARM_cpsr & PSR_T_BIT) >> 5))
+
+#define processor_mode(regs) \
+	((regs)->ARM_cpsr & MODE_MASK)
+
+#define interrupts_enabled(regs) \
+	(!((regs)->ARM_cpsr & PSR_I_BIT))
+
+#define fast_interrupts_enabled(regs) \
+	(!((regs)->ARM_cpsr & PSR_F_BIT))
+
+/* Are the current registers suitable for user mode?
+ * (used to maintain security in signal handlers)
+ */
+static inline int valid_user_regs(struct pt_regs *regs)
+{
+	if (user_mode(regs) && (regs->ARM_cpsr & PSR_I_BIT) == 0) {
+		regs->ARM_cpsr &= ~(PSR_F_BIT | PSR_A_BIT);
+		return 1;
+	}
+
+	/*
+	 * Force CPSR to something logical...
+	 */
+	regs->ARM_cpsr &= PSR_f | PSR_s | (PSR_x & ~PSR_A_BIT) | PSR_T_BIT | MODE32_BIT;
+	if (!(elf_hwcap & HWCAP_26BIT))
+		regs->ARM_cpsr |= USR_MODE;
+
+	return 0;
+}
+
+#define pc_pointer(v) \
+	((v) & ~PCMASK)
+
+#define instruction_pointer(regs) \
+	(pc_pointer((regs)->ARM_pc))
+
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *regs);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+
+#define predicate(x)		((x) & 0xf0000000)
+#define PREDICATE_ALWAYS	0xe0000000
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif
+
diff --git a/arch/arm/include/asm/resource.h b/arch/arm/include/asm/resource.h
new file mode 100644
index 000000000000..734b581b5b6a
--- /dev/null
+++ b/arch/arm/include/asm/resource.h
@@ -0,0 +1,6 @@
+#ifndef _ARM_RESOURCE_H
+#define _ARM_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif
diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h
new file mode 100644
index 000000000000..ca0a37d03400
--- /dev/null
+++ b/arch/arm/include/asm/scatterlist.h
@@ -0,0 +1,27 @@
+#ifndef _ASMARM_SCATTERLIST_H
+#define _ASMARM_SCATTERLIST_H
+
+#include <asm/memory.h>
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;		/* buffer offset		 */
+	dma_addr_t	dma_address;	/* dma address			 */
+	unsigned int	length;		/* length			 */
+};
+
+/*
+ * These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)      ((sg)->dma_address)
+#define sg_dma_len(sg)          ((sg)->length)
+
+#endif /* _ASMARM_SCATTERLIST_H */
diff --git a/arch/arm/include/asm/sections.h b/arch/arm/include/asm/sections.h
new file mode 100644
index 000000000000..2b8c5160388f
--- /dev/null
+++ b/arch/arm/include/asm/sections.h
@@ -0,0 +1 @@
+#include <asm-generic/sections.h>
diff --git a/arch/arm/include/asm/segment.h b/arch/arm/include/asm/segment.h
new file mode 100644
index 000000000000..9e24c21f6304
--- /dev/null
+++ b/arch/arm/include/asm/segment.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_ARM_SEGMENT_H
+#define __ASM_ARM_SEGMENT_H
+
+#define __KERNEL_CS   0x0
+#define __KERNEL_DS   0x0
+
+#define __USER_CS     0x1
+#define __USER_DS     0x1
+
+#endif /* __ASM_ARM_SEGMENT_H */
+
diff --git a/arch/arm/include/asm/sembuf.h b/arch/arm/include/asm/sembuf.h
new file mode 100644
index 000000000000..1c0283954289
--- /dev/null
+++ b/arch/arm/include/asm/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _ASMARM_SEMBUF_H
+#define _ASMARM_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASMARM_SEMBUF_H */
diff --git a/arch/arm/include/asm/serial.h b/arch/arm/include/asm/serial.h
new file mode 100644
index 000000000000..ebb049091e26
--- /dev/null
+++ b/arch/arm/include/asm/serial.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/include/asm/serial.h
+ *
+ *  Copyright (C) 1996 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   15-10-1996	RMK	Created
+ */
+
+#ifndef __ASM_SERIAL_H
+#define __ASM_SERIAL_H
+
+#define BASE_BAUD	(1843200 / 16)
+
+#endif
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
new file mode 100644
index 000000000000..7bbf105463f1
--- /dev/null
+++ b/arch/arm/include/asm/setup.h
@@ -0,0 +1,226 @@
+/*
+ *  linux/include/asm/setup.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Structure passed to kernel to tell it about the
+ *  hardware it's running on.  See Documentation/arm/Setup
+ *  for more info.
+ */
+#ifndef __ASMARM_SETUP_H
+#define __ASMARM_SETUP_H
+
+#include <asm/types.h>
+
+#define COMMAND_LINE_SIZE 1024
+
+/* The list ends with an ATAG_NONE node. */
+#define ATAG_NONE	0x00000000
+
+struct tag_header {
+	__u32 size;
+	__u32 tag;
+};
+
+/* The list must start with an ATAG_CORE node */
+#define ATAG_CORE	0x54410001
+
+struct tag_core {
+	__u32 flags;		/* bit 0 = read-only */
+	__u32 pagesize;
+	__u32 rootdev;
+};
+
+/* it is allowed to have multiple ATAG_MEM nodes */
+#define ATAG_MEM	0x54410002
+
+struct tag_mem32 {
+	__u32	size;
+	__u32	start;	/* physical start address */
+};
+
+/* VGA text type displays */
+#define ATAG_VIDEOTEXT	0x54410003
+
+struct tag_videotext {
+	__u8		x;
+	__u8		y;
+	__u16		video_page;
+	__u8		video_mode;
+	__u8		video_cols;
+	__u16		video_ega_bx;
+	__u8		video_lines;
+	__u8		video_isvga;
+	__u16		video_points;
+};
+
+/* describes how the ramdisk will be used in kernel */
+#define ATAG_RAMDISK	0x54410004
+
+struct tag_ramdisk {
+	__u32 flags;	/* bit 0 = load, bit 1 = prompt */
+	__u32 size;	/* decompressed ramdisk size in _kilo_ bytes */
+	__u32 start;	/* starting block of floppy-based RAM disk image */
+};
+
+/* describes where the compressed ramdisk image lives (virtual address) */
+/*
+ * this one accidentally used virtual addresses - as such,
+ * it's deprecated.
+ */
+#define ATAG_INITRD	0x54410005
+
+/* describes where the compressed ramdisk image lives (physical address) */
+#define ATAG_INITRD2	0x54420005
+
+struct tag_initrd {
+	__u32 start;	/* physical start address */
+	__u32 size;	/* size of compressed ramdisk image in bytes */
+};
+
+/* board serial number. "64 bits should be enough for everybody" */
+#define ATAG_SERIAL	0x54410006
+
+struct tag_serialnr {
+	__u32 low;
+	__u32 high;
+};
+
+/* board revision */
+#define ATAG_REVISION	0x54410007
+
+struct tag_revision {
+	__u32 rev;
+};
+
+/* initial values for vesafb-type framebuffers. see struct screen_info
+ * in include/linux/tty.h
+ */
+#define ATAG_VIDEOLFB	0x54410008
+
+struct tag_videolfb {
+	__u16		lfb_width;
+	__u16		lfb_height;
+	__u16		lfb_depth;
+	__u16		lfb_linelength;
+	__u32		lfb_base;
+	__u32		lfb_size;
+	__u8		red_size;
+	__u8		red_pos;
+	__u8		green_size;
+	__u8		green_pos;
+	__u8		blue_size;
+	__u8		blue_pos;
+	__u8		rsvd_size;
+	__u8		rsvd_pos;
+};
+
+/* command line: \0 terminated string */
+#define ATAG_CMDLINE	0x54410009
+
+struct tag_cmdline {
+	char	cmdline[1];	/* this is the minimum size */
+};
+
+/* acorn RiscPC specific information */
+#define ATAG_ACORN	0x41000101
+
+struct tag_acorn {
+	__u32 memc_control_reg;
+	__u32 vram_pages;
+	__u8 sounddefault;
+	__u8 adfsdrives;
+};
+
+/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
+#define ATAG_MEMCLK	0x41000402
+
+struct tag_memclk {
+	__u32 fmemclk;
+};
+
+struct tag {
+	struct tag_header hdr;
+	union {
+		struct tag_core		core;
+		struct tag_mem32	mem;
+		struct tag_videotext	videotext;
+		struct tag_ramdisk	ramdisk;
+		struct tag_initrd	initrd;
+		struct tag_serialnr	serialnr;
+		struct tag_revision	revision;
+		struct tag_videolfb	videolfb;
+		struct tag_cmdline	cmdline;
+
+		/*
+		 * Acorn specific
+		 */
+		struct tag_acorn	acorn;
+
+		/*
+		 * DC21285 specific
+		 */
+		struct tag_memclk	memclk;
+	} u;
+};
+
+struct tagtable {
+	__u32 tag;
+	int (*parse)(const struct tag *);
+};
+
+#define tag_member_present(tag,member)				\
+	((unsigned long)(&((struct tag *)0L)->member + 1)	\
+		<= (tag)->hdr.size * 4)
+
+#define tag_next(t)	((struct tag *)((__u32 *)(t) + (t)->hdr.size))
+#define tag_size(type)	((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
+
+#define for_each_tag(t,base)		\
+	for (t = base; t->hdr.size; t = tag_next(t))
+
+#ifdef __KERNEL__
+
+#define __tag __used __attribute__((__section__(".taglist.init")))
+#define __tagtable(tag, fn) \
+static struct tagtable __tagtable_##fn __tag = { tag, fn }
+
+/*
+ * Memory map description
+ */
+#ifdef CONFIG_ARCH_LH7A40X
+# define NR_BANKS 16
+#else
+# define NR_BANKS 8
+#endif
+
+struct membank {
+	unsigned long start;
+	unsigned long size;
+	int           node;
+};
+
+struct meminfo {
+	int nr_banks;
+	struct membank bank[NR_BANKS];
+};
+
+/*
+ * Early command line parameters.
+ */
+struct early_params {
+	const char *arg;
+	void (*fn)(char **p);
+};
+
+#define __early_param(name,fn)					\
+static struct early_params __early_##fn __used			\
+__attribute__((__section__(".early_param.init"))) = { name, fn }
+
+#endif  /*  __KERNEL__  */
+
+#endif
diff --git a/arch/arm/include/asm/shmbuf.h b/arch/arm/include/asm/shmbuf.h
new file mode 100644
index 000000000000..2e5c67ba1c97
--- /dev/null
+++ b/arch/arm/include/asm/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _ASMARM_SHMBUF_H
+#define _ASMARM_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for arm architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASMARM_SHMBUF_H */
diff --git a/arch/arm/include/asm/shmparam.h b/arch/arm/include/asm/shmparam.h
new file mode 100644
index 000000000000..a5223b3a9bf9
--- /dev/null
+++ b/arch/arm/include/asm/shmparam.h
@@ -0,0 +1,16 @@
+#ifndef _ASMARM_SHMPARAM_H
+#define _ASMARM_SHMPARAM_H
+
+/*
+ * This should be the size of the virtually indexed cache/ways,
+ * or page size, whichever is greater since the cache aliases
+ * every size/ways bytes.
+ */
+#define	SHMLBA	(4 * PAGE_SIZE)		 /* attach addr a multiple of this */
+
+/*
+ * Enforce SHMLBA in shmat
+ */
+#define __ARCH_FORCE_SHMLBA
+
+#endif /* _ASMARM_SHMPARAM_H */
diff --git a/arch/arm/include/asm/sigcontext.h b/arch/arm/include/asm/sigcontext.h
new file mode 100644
index 000000000000..fc0b80b6a6fc
--- /dev/null
+++ b/arch/arm/include/asm/sigcontext.h
@@ -0,0 +1,34 @@
+#ifndef _ASMARM_SIGCONTEXT_H
+#define _ASMARM_SIGCONTEXT_H
+
+/*
+ * Signal context structure - contains all info to do with the state
+ * before the signal handler was invoked.  Note: only add new entries
+ * to the end of the structure.
+ */
+struct sigcontext {
+	unsigned long trap_no;
+	unsigned long error_code;
+	unsigned long oldmask;
+	unsigned long arm_r0;
+	unsigned long arm_r1;
+	unsigned long arm_r2;
+	unsigned long arm_r3;
+	unsigned long arm_r4;
+	unsigned long arm_r5;
+	unsigned long arm_r6;
+	unsigned long arm_r7;
+	unsigned long arm_r8;
+	unsigned long arm_r9;
+	unsigned long arm_r10;
+	unsigned long arm_fp;
+	unsigned long arm_ip;
+	unsigned long arm_sp;
+	unsigned long arm_lr;
+	unsigned long arm_pc;
+	unsigned long arm_cpsr;
+	unsigned long fault_address;
+};
+
+
+#endif
diff --git a/arch/arm/include/asm/siginfo.h b/arch/arm/include/asm/siginfo.h
new file mode 100644
index 000000000000..5e21852e6039
--- /dev/null
+++ b/arch/arm/include/asm/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _ASMARM_SIGINFO_H
+#define _ASMARM_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/arch/arm/include/asm/signal.h b/arch/arm/include/asm/signal.h
new file mode 100644
index 000000000000..d0fb487aba4f
--- /dev/null
+++ b/arch/arm/include/asm/signal.h
@@ -0,0 +1,164 @@
+#ifndef _ASMARM_SIGNAL_H
+#define _ASMARM_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+#define SIGSWI		32
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_NOCLDSTOP		flag to turn off SIGCHLD when children stop.
+ * SA_NOCLDWAIT		flag on SIGCHLD to inhibit zombies.
+ * SA_SIGINFO		deliver the signal with SIGINFO structs
+ * SA_THIRTYTWO		delivers the signal in 32-bit mode, even if the task 
+ *			is running in 26-bit.
+ * SA_ONSTACK		allows alternate signal stacks (see sigaltstack(2)).
+ * SA_RESTART		flag to get restarting signals (which were the default long ago)
+ * SA_NODEFER		prevents the current signal from being masked in the handler.
+ * SA_RESETHAND		clears the handler when the signal is delivered.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_THIRTYTWO	0x02000000
+#define SA_RESTORER	0x04000000
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+#endif
+
+#endif
diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h
new file mode 100644
index 000000000000..503843db1565
--- /dev/null
+++ b/arch/arm/include/asm/sizes.h
@@ -0,0 +1,56 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ *                 from .s file by awk -f s2h.awk
+ */
+/*  Size definitions
+ *  Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __sizes_h
+#define __sizes_h                       1
+
+/* handy sizes */
+#define SZ_16				0x00000010
+#define SZ_256				0x00000100
+#define SZ_512				0x00000200
+
+#define SZ_1K                           0x00000400
+#define SZ_4K                           0x00001000
+#define SZ_8K                           0x00002000
+#define SZ_16K                          0x00004000
+#define SZ_64K                          0x00010000
+#define SZ_128K                         0x00020000
+#define SZ_256K                         0x00040000
+#define SZ_512K                         0x00080000
+
+#define SZ_1M                           0x00100000
+#define SZ_2M                           0x00200000
+#define SZ_4M                           0x00400000
+#define SZ_8M                           0x00800000
+#define SZ_16M                          0x01000000
+#define SZ_32M                          0x02000000
+#define SZ_64M                          0x04000000
+#define SZ_128M                         0x08000000
+#define SZ_256M                         0x10000000
+#define SZ_512M                         0x20000000
+
+#define SZ_1G                           0x40000000
+#define SZ_2G                           0x80000000
+
+#endif
+
+/*         END */
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
new file mode 100644
index 000000000000..727b5c042e52
--- /dev/null
+++ b/arch/arm/include/asm/smp.h
@@ -0,0 +1,147 @@
+/*
+ *  arch/arm/include/asm/smp.h
+ *
+ *  Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_SMP_H
+#define __ASM_ARM_SMP_H
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/thread_info.h>
+
+#include <mach/smp.h>
+
+#ifndef CONFIG_SMP
+# error "<asm/smp.h> included in non-SMP build"
+#endif
+
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+
+/*
+ * at the moment, there's not a big penalty for changing CPUs
+ * (the >big< penalty is running SMP in the first place)
+ */
+#define PROC_CHANGE_PENALTY		15
+
+struct seq_file;
+
+/*
+ * generate IPI list text
+ */
+extern void show_ipi_list(struct seq_file *p);
+
+/*
+ * Called from assembly code, this handles an IPI.
+ */
+asmlinkage void do_IPI(struct pt_regs *regs);
+
+/*
+ * Setup the SMP cpu_possible_map
+ */
+extern void smp_init_cpus(void);
+
+/*
+ * Move global data into per-processor storage.
+ */
+extern void smp_store_cpu_info(unsigned int cpuid);
+
+/*
+ * Raise an IPI cross call on CPUs in callmap.
+ */
+extern void smp_cross_call(cpumask_t callmap);
+
+/*
+ * Broadcast a timer interrupt to the other CPUs.
+ */
+extern void smp_send_timer(void);
+
+/*
+ * Broadcast a clock event to other CPUs.
+ */
+extern void smp_timer_broadcast(cpumask_t mask);
+
+/*
+ * Boot a secondary CPU, and assign it the specified idle task.
+ * This also gives us the initial stack to use for this CPU.
+ */
+extern int boot_secondary(unsigned int cpu, struct task_struct *);
+
+/*
+ * Called from platform specific assembly code, this is the
+ * secondary CPU entry point.
+ */
+asmlinkage void secondary_start_kernel(void);
+
+/*
+ * Perform platform specific initialisation of the specified CPU.
+ */
+extern void platform_secondary_init(unsigned int cpu);
+
+/*
+ * Initial data for bringing up a secondary CPU.
+ */
+struct secondary_data {
+	unsigned long pgdir;
+	void *stack;
+};
+extern struct secondary_data secondary_data;
+
+extern int __cpu_disable(void);
+extern int mach_cpu_disable(unsigned int cpu);
+
+extern void __cpu_die(unsigned int cpu);
+extern void cpu_die(void);
+
+extern void platform_cpu_die(unsigned int cpu);
+extern int platform_cpu_kill(unsigned int cpu);
+extern void platform_cpu_enable(unsigned int cpu);
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+/*
+ * Local timer interrupt handling function (can be IPI'ed).
+ */
+extern void local_timer_interrupt(void);
+
+#ifdef CONFIG_LOCAL_TIMERS
+
+/*
+ * Stop a local timer interrupt.
+ */
+extern void local_timer_stop(unsigned int cpu);
+
+/*
+ * Platform provides this to acknowledge a local timer IRQ
+ */
+extern int local_timer_ack(void);
+
+#else
+
+static inline void local_timer_stop(unsigned int cpu)
+{
+}
+
+#endif
+
+/*
+ * Setup a local timer interrupt for a CPU.
+ */
+extern void local_timer_setup(unsigned int cpu);
+
+/*
+ * show local interrupt info
+ */
+extern void show_local_irqs(struct seq_file *);
+
+/*
+ * Called from assembly, this is the local timer IRQ handler
+ */
+asmlinkage void do_local_timer(struct pt_regs *);
+
+#endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
new file mode 100644
index 000000000000..6817be9573a6
--- /dev/null
+++ b/arch/arm/include/asm/socket.h
@@ -0,0 +1,57 @@
+#ifndef _ASMARM_SOCKET_H
+#define _ASMARM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/arm/include/asm/sockios.h b/arch/arm/include/asm/sockios.h
new file mode 100644
index 000000000000..a2588a2512df
--- /dev/null
+++ b/arch/arm/include/asm/sockios.h
@@ -0,0 +1,13 @@
+#ifndef __ARCH_ARM_SOCKIOS_H
+#define __ARCH_ARM_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif
diff --git a/arch/arm/include/asm/sparsemem.h b/arch/arm/include/asm/sparsemem.h
new file mode 100644
index 000000000000..277158191a0d
--- /dev/null
+++ b/arch/arm/include/asm/sparsemem.h
@@ -0,0 +1,10 @@
+#ifndef ASMARM_SPARSEMEM_H
+#define ASMARM_SPARSEMEM_H
+
+#include <asm/memory.h>
+
+#define MAX_PHYSADDR_BITS	32
+#define MAX_PHYSMEM_BITS	32
+#define SECTION_SIZE_BITS	NODE_MEM_SIZE_BITS
+
+#endif
diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h
new file mode 100644
index 000000000000..2b41ebbfa7ff
--- /dev/null
+++ b/arch/arm/include/asm/spinlock.h
@@ -0,0 +1,224 @@
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#if __LINUX_ARM_ARCH__ < 6
+#error SMP not supported on pre-ARMv6 CPUs
+#endif
+
+/*
+ * ARMv6 Spin-locking.
+ *
+ * We exclusively read the old value.  If it is zero, we may have
+ * won the lock, so we try exclusively storing it.  A memory barrier
+ * is required after we get a lock, and before we release it, because
+ * V6 CPUs are assumed to have weakly ordered memory.
+ *
+ * Unlocked value: 0
+ * Locked value: 1
+ */
+
+#define __raw_spin_is_locked(x)		((x)->lock != 0)
+#define __raw_spin_unlock_wait(lock) \
+	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+
+#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%1]\n"
+"	teq	%0, #0\n"
+#ifdef CONFIG_CPU_32v6K
+"	wfene\n"
+#endif
+"	strexeq	%0, %2, [%1]\n"
+"	teqeq	%0, #0\n"
+"	bne	1b"
+	: "=&r" (tmp)
+	: "r" (&lock->lock), "r" (1)
+	: "cc");
+
+	smp_mb();
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+"	ldrex	%0, [%1]\n"
+"	teq	%0, #0\n"
+"	strexeq	%0, %2, [%1]"
+	: "=&r" (tmp)
+	: "r" (&lock->lock), "r" (1)
+	: "cc");
+
+	if (tmp == 0) {
+		smp_mb();
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	smp_mb();
+
+	__asm__ __volatile__(
+"	str	%1, [%0]\n"
+#ifdef CONFIG_CPU_32v6K
+"	mcr	p15, 0, %1, c7, c10, 4\n" /* DSB */
+"	sev"
+#endif
+	:
+	: "r" (&lock->lock), "r" (0)
+	: "cc");
+}
+
+/*
+ * RWLOCKS
+ *
+ *
+ * Write locks are easy - we just set bit 31.  When unlocking, we can
+ * just write zero since the lock is exclusively held.
+ */
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%1]\n"
+"	teq	%0, #0\n"
+#ifdef CONFIG_CPU_32v6K
+"	wfene\n"
+#endif
+"	strexeq	%0, %2, [%1]\n"
+"	teq	%0, #0\n"
+"	bne	1b"
+	: "=&r" (tmp)
+	: "r" (&rw->lock), "r" (0x80000000)
+	: "cc");
+
+	smp_mb();
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%1]\n"
+"	teq	%0, #0\n"
+"	strexeq	%0, %2, [%1]"
+	: "=&r" (tmp)
+	: "r" (&rw->lock), "r" (0x80000000)
+	: "cc");
+
+	if (tmp == 0) {
+		smp_mb();
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+	smp_mb();
+
+	__asm__ __volatile__(
+	"str	%1, [%0]\n"
+#ifdef CONFIG_CPU_32v6K
+"	mcr	p15, 0, %1, c7, c10, 4\n" /* DSB */
+"	sev\n"
+#endif
+	:
+	: "r" (&rw->lock), "r" (0)
+	: "cc");
+}
+
+/* write_can_lock - would write_trylock() succeed? */
+#define __raw_write_can_lock(x)		((x)->lock == 0)
+
+/*
+ * Read locks are a bit more hairy:
+ *  - Exclusively load the lock value.
+ *  - Increment it.
+ *  - Store new lock value if positive, and we still own this location.
+ *    If the value is negative, we've already failed.
+ *  - If we failed to store the value, we want a negative result.
+ *  - If we failed, try again.
+ * Unlocking is similarly hairy.  We may have multiple read locks
+ * currently active.  However, we know we won't have any write
+ * locks.
+ */
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+	unsigned long tmp, tmp2;
+
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%2]\n"
+"	adds	%0, %0, #1\n"
+"	strexpl	%1, %0, [%2]\n"
+#ifdef CONFIG_CPU_32v6K
+"	wfemi\n"
+#endif
+"	rsbpls	%0, %1, #0\n"
+"	bmi	1b"
+	: "=&r" (tmp), "=&r" (tmp2)
+	: "r" (&rw->lock)
+	: "cc");
+
+	smp_mb();
+}
+
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+	unsigned long tmp, tmp2;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%2]\n"
+"	sub	%0, %0, #1\n"
+"	strex	%1, %0, [%2]\n"
+"	teq	%1, #0\n"
+"	bne	1b"
+#ifdef CONFIG_CPU_32v6K
+"\n	cmp	%0, #0\n"
+"	mcreq   p15, 0, %0, c7, c10, 4\n"
+"	seveq"
+#endif
+	: "=&r" (tmp), "=&r" (tmp2)
+	: "r" (&rw->lock)
+	: "cc");
+}
+
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+	unsigned long tmp, tmp2 = 1;
+
+	__asm__ __volatile__(
+"1:	ldrex	%0, [%2]\n"
+"	adds	%0, %0, #1\n"
+"	strexpl	%1, %0, [%2]\n"
+	: "=&r" (tmp), "+r" (tmp2)
+	: "r" (&rw->lock)
+	: "cc");
+
+	smp_mb();
+	return tmp2 == 0;
+}
+
+/* read_can_lock - would read_trylock() succeed? */
+#define __raw_read_can_lock(x)		((x)->lock < 0x80000000)
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /* __ASM_SPINLOCK_H */
diff --git a/arch/arm/include/asm/spinlock_types.h b/arch/arm/include/asm/spinlock_types.h
new file mode 100644
index 000000000000..43e83f6d2ee5
--- /dev/null
+++ b/arch/arm/include/asm/spinlock_types.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_SPINLOCK_TYPES_H
+#define __ASM_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
+
+#endif
diff --git a/arch/arm/include/asm/stat.h b/arch/arm/include/asm/stat.h
new file mode 100644
index 000000000000..42c0c13999d5
--- /dev/null
+++ b/arch/arm/include/asm/stat.h
@@ -0,0 +1,87 @@
+#ifndef _ASMARM_STAT_H
+#define _ASMARM_STAT_H
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+#define STAT_HAVE_NSEC 
+
+struct stat {
+#if defined(__ARMEB__)
+	unsigned short st_dev;
+	unsigned short __pad1;
+#else
+	unsigned long  st_dev;
+#endif
+	unsigned long  st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+#if defined(__ARMEB__)
+	unsigned short st_rdev;
+	unsigned short __pad2;
+#else
+	unsigned long  st_rdev;
+#endif
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ * Note: The kernel zero's the padded region because glibc might read them
+ * in the hope that the kernel has stretched to using larger sizes.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char   __pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned long	__st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char   __pad3[4];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+	unsigned long long st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long long	st_ino;
+};
+
+#endif
diff --git a/arch/arm/include/asm/statfs.h b/arch/arm/include/asm/statfs.h
new file mode 100644
index 000000000000..a02e6a8c3d70
--- /dev/null
+++ b/arch/arm/include/asm/statfs.h
@@ -0,0 +1,42 @@
+#ifndef _ASMARM_STATFS_H
+#define _ASMARM_STATFS_H
+
+#ifndef __KERNEL_STRICT_NAMES
+# include <linux/types.h>
+typedef __kernel_fsid_t	fsid_t;
+#endif
+
+struct statfs {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u32 f_blocks;
+	__u32 f_bfree;
+	__u32 f_bavail;
+	__u32 f_files;
+	__u32 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+};
+
+/*
+ * With EABI there is 4 bytes of padding added to this structure.
+ * Let's pack it so the padding goes away to simplify dual ABI support.
+ * Note that user space does NOT have to pack this structure.
+ */
+struct statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+} __attribute__ ((packed,aligned(4)));
+
+#endif
diff --git a/arch/arm/include/asm/string.h b/arch/arm/include/asm/string.h
new file mode 100644
index 000000000000..e50c4a39b699
--- /dev/null
+++ b/arch/arm/include/asm/string.h
@@ -0,0 +1,50 @@
+#ifndef __ASM_ARM_STRING_H
+#define __ASM_ARM_STRING_H
+
+/*
+ * We don't do inline string functions, since the
+ * optimised inline asm versions are not small.
+ */
+
+#define __HAVE_ARCH_STRRCHR
+extern char * strrchr(const char * s, int c);
+
+#define __HAVE_ARCH_STRCHR
+extern char * strchr(const char * s, int c);
+
+#define __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMMOVE
+extern void * memmove(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMCHR
+extern void * memchr(const void *, int, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMZERO
+#define __HAVE_ARCH_MEMSET
+extern void * memset(void *, int, __kernel_size_t);
+
+extern void __memzero(void *ptr, __kernel_size_t n);
+
+#define memset(p,v,n)							\
+	({								\
+	 	void *__p = (p); size_t __n = n;			\
+		if ((__n) != 0) {					\
+			if (__builtin_constant_p((v)) && (v) == 0)	\
+				__memzero((__p),(__n));			\
+			else						\
+				memset((__p),(v),(__n));		\
+		}							\
+		(__p);							\
+	})
+
+#define memzero(p,n) 							\
+	({ 								\
+	 	void *__p = (p); size_t __n = n;			\
+	 	if ((__n) != 0) 					\
+	 		__memzero((__p),(__n)); 			\
+	 	(__p); 							\
+	 })
+
+#endif
diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
new file mode 100644
index 000000000000..cf0d0bdee74d
--- /dev/null
+++ b/arch/arm/include/asm/suspend.h
@@ -0,0 +1,4 @@
+#ifndef _ASMARM_SUSPEND_H
+#define _ASMARM_SUSPEND_H
+
+#endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
new file mode 100644
index 000000000000..514af792a598
--- /dev/null
+++ b/arch/arm/include/asm/system.h
@@ -0,0 +1,388 @@
+#ifndef __ASM_ARM_SYSTEM_H
+#define __ASM_ARM_SYSTEM_H
+
+#ifdef __KERNEL__
+
+#include <asm/memory.h>
+
+#define CPU_ARCH_UNKNOWN	0
+#define CPU_ARCH_ARMv3		1
+#define CPU_ARCH_ARMv4		2
+#define CPU_ARCH_ARMv4T		3
+#define CPU_ARCH_ARMv5		4
+#define CPU_ARCH_ARMv5T		5
+#define CPU_ARCH_ARMv5TE	6
+#define CPU_ARCH_ARMv5TEJ	7
+#define CPU_ARCH_ARMv6		8
+#define CPU_ARCH_ARMv7		9
+
+/*
+ * CR1 bits (CP#15 CR1)
+ */
+#define CR_M	(1 << 0)	/* MMU enable				*/
+#define CR_A	(1 << 1)	/* Alignment abort enable		*/
+#define CR_C	(1 << 2)	/* Dcache enable			*/
+#define CR_W	(1 << 3)	/* Write buffer enable			*/
+#define CR_P	(1 << 4)	/* 32-bit exception handler		*/
+#define CR_D	(1 << 5)	/* 32-bit data address range		*/
+#define CR_L	(1 << 6)	/* Implementation defined		*/
+#define CR_B	(1 << 7)	/* Big endian				*/
+#define CR_S	(1 << 8)	/* System MMU protection		*/
+#define CR_R	(1 << 9)	/* ROM MMU protection			*/
+#define CR_F	(1 << 10)	/* Implementation defined		*/
+#define CR_Z	(1 << 11)	/* Implementation defined		*/
+#define CR_I	(1 << 12)	/* Icache enable			*/
+#define CR_V	(1 << 13)	/* Vectors relocated to 0xffff0000	*/
+#define CR_RR	(1 << 14)	/* Round Robin cache replacement	*/
+#define CR_L4	(1 << 15)	/* LDR pc can set T bit			*/
+#define CR_DT	(1 << 16)
+#define CR_IT	(1 << 18)
+#define CR_ST	(1 << 19)
+#define CR_FI	(1 << 21)	/* Fast interrupt (lower latency mode)	*/
+#define CR_U	(1 << 22)	/* Unaligned access operation		*/
+#define CR_XP	(1 << 23)	/* Extended page tables			*/
+#define CR_VE	(1 << 24)	/* Vectored interrupts			*/
+
+#define CPUID_ID	0
+#define CPUID_CACHETYPE	1
+#define CPUID_TCM	2
+#define CPUID_TLBTYPE	3
+
+/*
+ * This is used to ensure the compiler did actually allocate the register we
+ * asked it for some inline assembly sequences.  Apparently we can't trust
+ * the compiler from one version to another so a bit of paranoia won't hurt.
+ * This string is meant to be concatenated with the inline asm string and
+ * will cause compilation to stop on mismatch.
+ * (for details, see gcc PR 15089)
+ */
+#define __asmeq(x, y)  ".ifnc " x "," y " ; .err ; .endif\n\t"
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <linux/stringify.h>
+#include <linux/irqflags.h>
+
+#ifdef CONFIG_CPU_CP15
+#define read_cpuid(reg)							\
+	({								\
+		unsigned int __val;					\
+		asm("mrc	p15, 0, %0, c0, c0, " __stringify(reg)	\
+		    : "=r" (__val)					\
+		    :							\
+		    : "cc");						\
+		__val;							\
+	})
+#else
+extern unsigned int processor_id;
+#define read_cpuid(reg) (processor_id)
+#endif
+
+/*
+ * The CPU ID never changes at run time, so we might as well tell the
+ * compiler that it's constant.  Use this function to read the CPU ID
+ * rather than directly reading processor_id or read_cpuid() directly.
+ */
+static inline unsigned int read_cpuid_id(void) __attribute_const__;
+
+static inline unsigned int read_cpuid_id(void)
+{
+	return read_cpuid(CPUID_ID);
+}
+
+#define __exception	__attribute__((section(".exception.text")))
+
+struct thread_info;
+struct task_struct;
+
+/* information about the system we're running on */
+extern unsigned int system_rev;
+extern unsigned int system_serial_low;
+extern unsigned int system_serial_high;
+extern unsigned int mem_fclk_21285;
+
+struct pt_regs;
+
+void die(const char *msg, struct pt_regs *regs, int err)
+		__attribute__((noreturn));
+
+struct siginfo;
+void arm_notify_die(const char *str, struct pt_regs *regs, struct siginfo *info,
+		unsigned long err, unsigned long trap);
+
+void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
+				       struct pt_regs *),
+		     int sig, const char *name);
+
+#define xchg(ptr,x) \
+	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+extern asmlinkage void __backtrace(void);
+extern asmlinkage void c_backtrace(unsigned long fp, int pmode);
+
+struct mm_struct;
+extern void show_pte(struct mm_struct *mm, unsigned long addr);
+extern void __show_regs(struct pt_regs *);
+
+extern int cpu_architecture(void);
+extern void cpu_init(void);
+
+void arm_machine_restart(char mode);
+extern void (*arm_pm_restart)(char str);
+
+/*
+ * Intel's XScale3 core supports some v6 features (supersections, L2)
+ * but advertises itself as v5 as it does not support the v6 ISA.  For
+ * this reason, we need a way to explicitly test for this type of CPU.
+ */
+#ifndef CONFIG_CPU_XSC3
+#define cpu_is_xsc3()	0
+#else
+static inline int cpu_is_xsc3(void)
+{
+	extern unsigned int processor_id;
+
+	if ((processor_id & 0xffffe000) == 0x69056000)
+		return 1;
+
+	return 0;
+}
+#endif
+
+#if !defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_CPU_XSC3)
+#define	cpu_is_xscale()	0
+#else
+#define	cpu_is_xscale()	1
+#endif
+
+#define UDBG_UNDEFINED	(1 << 0)
+#define UDBG_SYSCALL	(1 << 1)
+#define UDBG_BADABORT	(1 << 2)
+#define UDBG_SEGV	(1 << 3)
+#define UDBG_BUS	(1 << 4)
+
+extern unsigned int user_debug;
+
+#if __LINUX_ARM_ARCH__ >= 4
+#define vectors_high()	(cr_alignment & CR_V)
+#else
+#define vectors_high()	(0)
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+#define isb() __asm__ __volatile__ ("isb" : : : "memory")
+#define dsb() __asm__ __volatile__ ("dsb" : : : "memory")
+#define dmb() __asm__ __volatile__ ("dmb" : : : "memory")
+#elif defined(CONFIG_CPU_XSC3) || __LINUX_ARM_ARCH__ == 6
+#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
+				    : : "r" (0) : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+				    : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
+				    : : "r" (0) : "memory")
+#else
+#define isb() __asm__ __volatile__ ("" : : : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+				    : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("" : : : "memory")
+#endif
+
+#ifndef CONFIG_SMP
+#define mb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#define rmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#define wmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#else
+#define mb()		dmb()
+#define rmb()		dmb()
+#define wmb()		dmb()
+#define smp_mb()	dmb()
+#define smp_rmb()	dmb()
+#define smp_wmb()	dmb()
+#endif
+#define read_barrier_depends()		do { } while(0)
+#define smp_read_barrier_depends()	do { } while(0)
+
+#define set_mb(var, value)	do { var = value; smp_mb(); } while (0)
+#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
+
+extern unsigned long cr_no_alignment;	/* defined in entry-armv.S */
+extern unsigned long cr_alignment;	/* defined in entry-armv.S */
+
+static inline unsigned int get_cr(void)
+{
+	unsigned int val;
+	asm("mrc p15, 0, %0, c1, c0, 0	@ get CR" : "=r" (val) : : "cc");
+	return val;
+}
+
+static inline void set_cr(unsigned int val)
+{
+	asm volatile("mcr p15, 0, %0, c1, c0, 0	@ set CR"
+	  : : "r" (val) : "cc");
+	isb();
+}
+
+#ifndef CONFIG_SMP
+extern void adjust_cr(unsigned long mask, unsigned long set);
+#endif
+
+#define CPACC_FULL(n)		(3 << (n * 2))
+#define CPACC_SVC(n)		(1 << (n * 2))
+#define CPACC_DISABLE(n)	(0 << (n * 2))
+
+static inline unsigned int get_copro_access(void)
+{
+	unsigned int val;
+	asm("mrc p15, 0, %0, c1, c0, 2 @ get copro access"
+	  : "=r" (val) : : "cc");
+	return val;
+}
+
+static inline void set_copro_access(unsigned int val)
+{
+	asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access"
+	  : : "r" (val) : "cc");
+	isb();
+}
+
+/*
+ * switch_mm() may do a full cache flush over the context switch,
+ * so enable interrupts over the context switch to avoid high
+ * latency.
+ */
+#define __ARCH_WANT_INTERRUPTS_ON_CTXSW
+
+/*
+ * switch_to(prev, next) should switch from task `prev' to `next'
+ * `prev' will never be the same as `next'.  schedule() itself
+ * contains the memory barrier to tell GCC not to cache `current'.
+ */
+extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *);
+
+#define switch_to(prev,next,last)					\
+do {									\
+	last = __switch_to(prev,task_thread_info(prev), task_thread_info(next));	\
+} while (0)
+
+#if defined(CONFIG_CPU_SA1100) || defined(CONFIG_CPU_SA110)
+/*
+ * On the StrongARM, "swp" is terminally broken since it bypasses the
+ * cache totally.  This means that the cache becomes inconsistent, and,
+ * since we use normal loads/stores as well, this is really bad.
+ * Typically, this causes oopsen in filp_close, but could have other,
+ * more disasterous effects.  There are two work-arounds:
+ *  1. Disable interrupts and emulate the atomic swap
+ *  2. Clean the cache, perform atomic swap, flush the cache
+ *
+ * We choose (1) since its the "easiest" to achieve here and is not
+ * dependent on the processor type.
+ *
+ * NOTE that this solution won't work on an SMP system, so explcitly
+ * forbid it here.
+ */
+#define swp_is_buggy
+#endif
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size)
+{
+	extern void __bad_xchg(volatile void *, int);
+	unsigned long ret;
+#ifdef swp_is_buggy
+	unsigned long flags;
+#endif
+#if __LINUX_ARM_ARCH__ >= 6
+	unsigned int tmp;
+#endif
+
+	switch (size) {
+#if __LINUX_ARM_ARCH__ >= 6
+	case 1:
+		asm volatile("@	__xchg1\n"
+		"1:	ldrexb	%0, [%3]\n"
+		"	strexb	%1, %2, [%3]\n"
+		"	teq	%1, #0\n"
+		"	bne	1b"
+			: "=&r" (ret), "=&r" (tmp)
+			: "r" (x), "r" (ptr)
+			: "memory", "cc");
+		break;
+	case 4:
+		asm volatile("@	__xchg4\n"
+		"1:	ldrex	%0, [%3]\n"
+		"	strex	%1, %2, [%3]\n"
+		"	teq	%1, #0\n"
+		"	bne	1b"
+			: "=&r" (ret), "=&r" (tmp)
+			: "r" (x), "r" (ptr)
+			: "memory", "cc");
+		break;
+#elif defined(swp_is_buggy)
+#ifdef CONFIG_SMP
+#error SMP is not supported on this platform
+#endif
+	case 1:
+		raw_local_irq_save(flags);
+		ret = *(volatile unsigned char *)ptr;
+		*(volatile unsigned char *)ptr = x;
+		raw_local_irq_restore(flags);
+		break;
+
+	case 4:
+		raw_local_irq_save(flags);
+		ret = *(volatile unsigned long *)ptr;
+		*(volatile unsigned long *)ptr = x;
+		raw_local_irq_restore(flags);
+		break;
+#else
+	case 1:
+		asm volatile("@	__xchg1\n"
+		"	swpb	%0, %1, [%2]"
+			: "=&r" (ret)
+			: "r" (x), "r" (ptr)
+			: "memory", "cc");
+		break;
+	case 4:
+		asm volatile("@	__xchg4\n"
+		"	swp	%0, %1, [%2]"
+			: "=&r" (ret)
+			: "r" (x), "r" (ptr)
+			: "memory", "cc");
+		break;
+#endif
+	default:
+		__bad_xchg(ptr, size), ret = 0;
+		break;
+	}
+
+	return ret;
+}
+
+extern void disable_hlt(void);
+extern void enable_hlt(void);
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)				  	       \
+	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#ifndef CONFIG_SMP
+#include <asm-generic/cmpxchg.h>
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/arm/include/asm/termbits.h b/arch/arm/include/asm/termbits.h
new file mode 100644
index 000000000000..f784d11f40b5
--- /dev/null
+++ b/arch/arm/include/asm/termbits.h
@@ -0,0 +1,197 @@
+#ifndef __ASM_ARM_TERMBITS_H
+#define __ASM_ARM_TERMBITS_H
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    BOTHER 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000		/* input baud rate */
+#define CMSPAR    010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+#define IBSHIFT	   16
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif	/* __ASM_ARM_TERMBITS_H */
diff --git a/arch/arm/include/asm/termios.h b/arch/arm/include/asm/termios.h
new file mode 100644
index 000000000000..293e3f1bc3f2
--- /dev/null
+++ b/arch/arm/include/asm/termios.h
@@ -0,0 +1,92 @@
+#ifndef __ASM_ARM_TERMIOS_H
+#define __ASM_ARM_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+#ifdef __KERNEL__
+/*	intr=^C		quit=^|		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) {		\
+	unsigned short __tmp;					\
+	get_user(__tmp,&(termio)->x);				\
+	*(unsigned short *) &(termios)->x = __tmp;		\
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* __ASM_ARM_TERMIOS_H */
diff --git a/arch/arm/include/asm/therm.h b/arch/arm/include/asm/therm.h
new file mode 100644
index 000000000000..f002f0197d78
--- /dev/null
+++ b/arch/arm/include/asm/therm.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/include/asm/therm.h: Definitions for Dallas Semiconductor
+ *  DS1620 thermometer driver (as used in the Rebel.com NetWinder)
+ */
+#ifndef __ASM_THERM_H
+#define __ASM_THERM_H
+
+/* ioctl numbers for /dev/therm */
+#define CMD_SET_THERMOSTATE	0x53
+#define CMD_GET_THERMOSTATE	0x54
+#define CMD_GET_STATUS		0x56
+#define CMD_GET_TEMPERATURE	0x57
+#define CMD_SET_THERMOSTATE2	0x58
+#define CMD_GET_THERMOSTATE2	0x59
+#define CMD_GET_TEMPERATURE2	0x5a
+#define CMD_GET_FAN		0x5b
+#define CMD_SET_FAN		0x5c
+
+#define FAN_OFF			0
+#define FAN_ON			1
+#define FAN_ALWAYS_ON		2
+
+struct therm {
+	int hi;
+	int lo;
+};
+
+#endif
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
new file mode 100644
index 000000000000..e56fa48e4ae7
--- /dev/null
+++ b/arch/arm/include/asm/thread_info.h
@@ -0,0 +1,153 @@
+/*
+ *  arch/arm/include/asm/thread_info.h
+ *
+ *  Copyright (C) 2002 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_THREAD_INFO_H
+#define __ASM_ARM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <asm/fpstate.h>
+
+#define THREAD_SIZE_ORDER	1
+#define THREAD_SIZE		8192
+#define THREAD_START_SP		(THREAD_SIZE - 8)
+
+#ifndef __ASSEMBLY__
+
+struct task_struct;
+struct exec_domain;
+
+#include <asm/types.h>
+#include <asm/domain.h>
+
+typedef unsigned long mm_segment_t;
+
+struct cpu_context_save {
+	__u32	r4;
+	__u32	r5;
+	__u32	r6;
+	__u32	r7;
+	__u32	r8;
+	__u32	r9;
+	__u32	sl;
+	__u32	fp;
+	__u32	sp;
+	__u32	pc;
+	__u32	extra[2];		/* Xscale 'acc' register, etc */
+};
+
+/*
+ * low level task data that entry.S needs immediate access to.
+ * __switch_to() assumes cpu_context follows immediately after cpu_domain.
+ */
+struct thread_info {
+	unsigned long		flags;		/* low level flags */
+	int			preempt_count;	/* 0 => preemptable, <0 => bug */
+	mm_segment_t		addr_limit;	/* address limit */
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	__u32			cpu;		/* cpu */
+	__u32			cpu_domain;	/* cpu domain */
+	struct cpu_context_save	cpu_context;	/* cpu context */
+	__u32			syscall;	/* syscall number */
+	__u8			used_cp[16];	/* thread used copro */
+	unsigned long		tp_value;
+	struct crunch_state	crunchstate;
+	union fp_state		fpstate __attribute__((aligned(8)));
+	union vfp_state		vfpstate;
+#ifdef CONFIG_ARM_THUMBEE
+	unsigned long		thumbee_state;	/* ThumbEE Handler Base register */
+#endif
+	struct restart_block	restart_block;
+};
+
+#define INIT_THREAD_INFO(tsk)						\
+{									\
+	.task		= &tsk,						\
+	.exec_domain	= &default_exec_domain,				\
+	.flags		= 0,						\
+	.preempt_count	= 1,						\
+	.addr_limit	= KERNEL_DS,					\
+	.cpu_domain	= domain_val(DOMAIN_USER, DOMAIN_MANAGER) |	\
+			  domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) |	\
+			  domain_val(DOMAIN_IO, DOMAIN_CLIENT),		\
+	.restart_block	= {						\
+		.fn	= do_no_restart_syscall,			\
+	},								\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/*
+ * how to get the thread information struct from C
+ */
+static inline struct thread_info *current_thread_info(void) __attribute_const__;
+
+static inline struct thread_info *current_thread_info(void)
+{
+	register unsigned long sp asm ("sp");
+	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
+}
+
+#define thread_saved_pc(tsk)	\
+	((unsigned long)(pc_pointer(task_thread_info(tsk)->cpu_context.pc)))
+#define thread_saved_fp(tsk)	\
+	((unsigned long)(task_thread_info(tsk)->cpu_context.fp))
+
+extern void crunch_task_disable(struct thread_info *);
+extern void crunch_task_copy(struct thread_info *, void *);
+extern void crunch_task_restore(struct thread_info *, void *);
+extern void crunch_task_release(struct thread_info *);
+
+extern void iwmmxt_task_disable(struct thread_info *);
+extern void iwmmxt_task_copy(struct thread_info *, void *);
+extern void iwmmxt_task_restore(struct thread_info *, void *);
+extern void iwmmxt_task_release(struct thread_info *);
+extern void iwmmxt_task_switch(struct thread_info *);
+
+#endif
+
+/*
+ * We use bit 30 of the preempt_count to indicate that kernel
+ * preemption is occurring.  See <asm/hardirq.h>.
+ */
+#define PREEMPT_ACTIVE	0x40000000
+
+/*
+ * thread information flags:
+ *  TIF_SYSCALL_TRACE	- syscall trace active
+ *  TIF_SIGPENDING	- signal pending
+ *  TIF_NEED_RESCHED	- rescheduling necessary
+ *  TIF_USEDFPU		- FPU was used by this task this quantum (SMP)
+ *  TIF_POLLING_NRFLAG	- true if poll_idle() is polling TIF_NEED_RESCHED
+ */
+#define TIF_SIGPENDING		0
+#define TIF_NEED_RESCHED	1
+#define TIF_SYSCALL_TRACE	8
+#define TIF_POLLING_NRFLAG	16
+#define TIF_USING_IWMMXT	17
+#define TIF_MEMDIE		18
+#define TIF_FREEZE		19
+
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_USING_IWMMXT	(1 << TIF_USING_IWMMXT)
+#define _TIF_FREEZE		(1 << TIF_FREEZE)
+
+/*
+ * Change these and you break ASM code in entry-common.S
+ */
+#define _TIF_WORK_MASK		0x000000ff
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_ARM_THREAD_INFO_H */
diff --git a/arch/arm/include/asm/thread_notify.h b/arch/arm/include/asm/thread_notify.h
new file mode 100644
index 000000000000..f27379d7f72a
--- /dev/null
+++ b/arch/arm/include/asm/thread_notify.h
@@ -0,0 +1,48 @@
+/*
+ *  arch/arm/include/asm/thread_notify.h
+ *
+ *  Copyright (C) 2006 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_THREAD_NOTIFY_H
+#define ASMARM_THREAD_NOTIFY_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#include <linux/notifier.h>
+#include <asm/thread_info.h>
+
+static inline int thread_register_notifier(struct notifier_block *n)
+{
+	extern struct atomic_notifier_head thread_notify_head;
+	return atomic_notifier_chain_register(&thread_notify_head, n);
+}
+
+static inline void thread_unregister_notifier(struct notifier_block *n)
+{
+	extern struct atomic_notifier_head thread_notify_head;
+	atomic_notifier_chain_unregister(&thread_notify_head, n);
+}
+
+static inline void thread_notify(unsigned long rc, struct thread_info *thread)
+{
+	extern struct atomic_notifier_head thread_notify_head;
+	atomic_notifier_call_chain(&thread_notify_head, rc, thread);
+}
+
+#endif
+
+/*
+ * These are the reason codes for the thread notifier.
+ */
+#define THREAD_NOTIFY_FLUSH	0
+#define THREAD_NOTIFY_RELEASE	1
+#define THREAD_NOTIFY_SWITCH	2
+
+#endif
+#endif
diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h
new file mode 100644
index 000000000000..3be8de3adaba
--- /dev/null
+++ b/arch/arm/include/asm/timex.h
@@ -0,0 +1,24 @@
+/*
+ *  arch/arm/include/asm/timex.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Architecture Specific TIME specifications
+ */
+#ifndef _ASMARM_TIMEX_H
+#define _ASMARM_TIMEX_H
+
+#include <mach/timex.h>
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles (void)
+{
+	return 0;
+}
+
+#endif
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
new file mode 100644
index 000000000000..857f1dfac794
--- /dev/null
+++ b/arch/arm/include/asm/tlb.h
@@ -0,0 +1,94 @@
+/*
+ *  arch/arm/include/asm/tlb.h
+ *
+ *  Copyright (C) 2002 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Experimentation shows that on a StrongARM, it appears to be faster
+ *  to use the "invalidate whole tlb" rather than "invalidate single
+ *  tlb" for this.
+ *
+ *  This appears true for both the process fork+exit case, as well as
+ *  the munmap-large-area case.
+ */
+#ifndef __ASMARM_TLB_H
+#define __ASMARM_TLB_H
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+#ifndef CONFIG_MMU
+
+#include <linux/pagemap.h>
+#include <asm-generic/tlb.h>
+
+#else /* !CONFIG_MMU */
+
+#include <asm/pgalloc.h>
+
+/*
+ * TLB handling.  This allows us to remove pages from the page
+ * tables, and efficiently handle the TLB issues.
+ */
+struct mmu_gather {
+	struct mm_struct	*mm;
+	unsigned int		fullmm;
+};
+
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+static inline struct mmu_gather *
+tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
+{
+	struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
+
+	tlb->mm = mm;
+	tlb->fullmm = full_mm_flush;
+
+	return tlb;
+}
+
+static inline void
+tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	if (tlb->fullmm)
+		flush_tlb_mm(tlb->mm);
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+
+	put_cpu_var(mmu_gathers);
+}
+
+#define tlb_remove_tlb_entry(tlb,ptep,address)	do { } while (0)
+
+/*
+ * In the case of tlb vma handling, we can optimise these away in the
+ * case where we're doing a full MM flush.  When we're doing a munmap,
+ * the vmas are adjusted to only cover the region to be torn down.
+ */
+static inline void
+tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+	if (!tlb->fullmm)
+		flush_cache_range(vma, vma->vm_start, vma->vm_end);
+}
+
+static inline void
+tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
+{
+	if (!tlb->fullmm)
+		flush_tlb_range(vma, vma->vm_start, vma->vm_end);
+}
+
+#define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
+#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
+
+#define tlb_migrate_finish(mm)		do { } while (0)
+
+#endif /* CONFIG_MMU */
+#endif
diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h
new file mode 100644
index 000000000000..0d0d40f1b599
--- /dev/null
+++ b/arch/arm/include/asm/tlbflush.h
@@ -0,0 +1,500 @@
+/*
+ *  arch/arm/include/asm/tlbflush.h
+ *
+ *  Copyright (C) 1999-2003 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_TLBFLUSH_H
+#define _ASMARM_TLBFLUSH_H
+
+
+#ifndef CONFIG_MMU
+
+#define tlb_flush(tlb)	((void) tlb)
+
+#else /* CONFIG_MMU */
+
+#include <asm/glue.h>
+
+#define TLB_V3_PAGE	(1 << 0)
+#define TLB_V4_U_PAGE	(1 << 1)
+#define TLB_V4_D_PAGE	(1 << 2)
+#define TLB_V4_I_PAGE	(1 << 3)
+#define TLB_V6_U_PAGE	(1 << 4)
+#define TLB_V6_D_PAGE	(1 << 5)
+#define TLB_V6_I_PAGE	(1 << 6)
+
+#define TLB_V3_FULL	(1 << 8)
+#define TLB_V4_U_FULL	(1 << 9)
+#define TLB_V4_D_FULL	(1 << 10)
+#define TLB_V4_I_FULL	(1 << 11)
+#define TLB_V6_U_FULL	(1 << 12)
+#define TLB_V6_D_FULL	(1 << 13)
+#define TLB_V6_I_FULL	(1 << 14)
+
+#define TLB_V6_U_ASID	(1 << 16)
+#define TLB_V6_D_ASID	(1 << 17)
+#define TLB_V6_I_ASID	(1 << 18)
+
+#define TLB_L2CLEAN_FR	(1 << 29)		/* Feroceon */
+#define TLB_DCLEAN	(1 << 30)
+#define TLB_WB		(1 << 31)
+
+/*
+ *	MMU TLB Model
+ *	=============
+ *
+ *	We have the following to choose from:
+ *	  v3    - ARMv3
+ *	  v4    - ARMv4 without write buffer
+ *	  v4wb  - ARMv4 with write buffer without I TLB flush entry instruction
+ *	  v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
+ *	  fr    - Feroceon (v4wbi with non-outer-cacheable page table walks)
+ *	  v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
+ */
+#undef _TLB
+#undef MULTI_TLB
+
+#define v3_tlb_flags	(TLB_V3_FULL | TLB_V3_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V3
+# define v3_possible_flags	v3_tlb_flags
+# define v3_always_flags	v3_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v3
+# endif
+#else
+# define v3_possible_flags	0
+# define v3_always_flags	(-1UL)
+#endif
+
+#define v4_tlb_flags	(TLB_V4_U_FULL | TLB_V4_U_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V4WT
+# define v4_possible_flags	v4_tlb_flags
+# define v4_always_flags	v4_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v4
+# endif
+#else
+# define v4_possible_flags	0
+# define v4_always_flags	(-1UL)
+#endif
+
+#define v4wbi_tlb_flags	(TLB_WB | TLB_DCLEAN | \
+			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
+			 TLB_V4_I_PAGE | TLB_V4_D_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V4WBI
+# define v4wbi_possible_flags	v4wbi_tlb_flags
+# define v4wbi_always_flags	v4wbi_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v4wbi
+# endif
+#else
+# define v4wbi_possible_flags	0
+# define v4wbi_always_flags	(-1UL)
+#endif
+
+#define fr_tlb_flags	(TLB_WB | TLB_DCLEAN | TLB_L2CLEAN_FR | \
+			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
+			 TLB_V4_I_PAGE | TLB_V4_D_PAGE)
+
+#ifdef CONFIG_CPU_TLB_FEROCEON
+# define fr_possible_flags	fr_tlb_flags
+# define fr_always_flags	fr_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v4wbi
+# endif
+#else
+# define fr_possible_flags	0
+# define fr_always_flags	(-1UL)
+#endif
+
+#define v4wb_tlb_flags	(TLB_WB | TLB_DCLEAN | \
+			 TLB_V4_I_FULL | TLB_V4_D_FULL | \
+			 TLB_V4_D_PAGE)
+
+#ifdef CONFIG_CPU_TLB_V4WB
+# define v4wb_possible_flags	v4wb_tlb_flags
+# define v4wb_always_flags	v4wb_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v4wb
+# endif
+#else
+# define v4wb_possible_flags	0
+# define v4wb_always_flags	(-1UL)
+#endif
+
+#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | \
+			 TLB_V6_I_FULL | TLB_V6_D_FULL | \
+			 TLB_V6_I_PAGE | TLB_V6_D_PAGE | \
+			 TLB_V6_I_ASID | TLB_V6_D_ASID)
+
+#ifdef CONFIG_CPU_TLB_V6
+# define v6wbi_possible_flags	v6wbi_tlb_flags
+# define v6wbi_always_flags	v6wbi_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v6wbi
+# endif
+#else
+# define v6wbi_possible_flags	0
+# define v6wbi_always_flags	(-1UL)
+#endif
+
+#ifdef CONFIG_CPU_TLB_V7
+# define v7wbi_possible_flags	v6wbi_tlb_flags
+# define v7wbi_always_flags	v6wbi_tlb_flags
+# ifdef _TLB
+#  define MULTI_TLB 1
+# else
+#  define _TLB v7wbi
+# endif
+#else
+# define v7wbi_possible_flags	0
+# define v7wbi_always_flags	(-1UL)
+#endif
+
+#ifndef _TLB
+#error Unknown TLB model
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+
+struct cpu_tlb_fns {
+	void (*flush_user_range)(unsigned long, unsigned long, struct vm_area_struct *);
+	void (*flush_kern_range)(unsigned long, unsigned long);
+	unsigned long tlb_flags;
+};
+
+/*
+ * Select the calling method
+ */
+#ifdef MULTI_TLB
+
+#define __cpu_flush_user_tlb_range	cpu_tlb.flush_user_range
+#define __cpu_flush_kern_tlb_range	cpu_tlb.flush_kern_range
+
+#else
+
+#define __cpu_flush_user_tlb_range	__glue(_TLB,_flush_user_tlb_range)
+#define __cpu_flush_kern_tlb_range	__glue(_TLB,_flush_kern_tlb_range)
+
+extern void __cpu_flush_user_tlb_range(unsigned long, unsigned long, struct vm_area_struct *);
+extern void __cpu_flush_kern_tlb_range(unsigned long, unsigned long);
+
+#endif
+
+extern struct cpu_tlb_fns cpu_tlb;
+
+#define __cpu_tlb_flags			cpu_tlb.tlb_flags
+
+/*
+ *	TLB Management
+ *	==============
+ *
+ *	The arch/arm/mm/tlb-*.S files implement these methods.
+ *
+ *	The TLB specific code is expected to perform whatever tests it
+ *	needs to determine if it should invalidate the TLB for each
+ *	call.  Start addresses are inclusive and end addresses are
+ *	exclusive; it is safe to round these addresses down.
+ *
+ *	flush_tlb_all()
+ *
+ *		Invalidate the entire TLB.
+ *
+ *	flush_tlb_mm(mm)
+ *
+ *		Invalidate all TLB entries in a particular address
+ *		space.
+ *		- mm	- mm_struct describing address space
+ *
+ *	flush_tlb_range(mm,start,end)
+ *
+ *		Invalidate a range of TLB entries in the specified
+ *		address space.
+ *		- mm	- mm_struct describing address space
+ *		- start - start address (may not be aligned)
+ *		- end	- end address (exclusive, may not be aligned)
+ *
+ *	flush_tlb_page(vaddr,vma)
+ *
+ *		Invalidate the specified page in the specified address range.
+ *		- vaddr - virtual address (may not be aligned)
+ *		- vma	- vma_struct describing address range
+ *
+ *	flush_kern_tlb_page(kaddr)
+ *
+ *		Invalidate the TLB entry for the specified page.  The address
+ *		will be in the kernels virtual memory space.  Current uses
+ *		only require the D-TLB to be invalidated.
+ *		- kaddr - Kernel virtual memory address
+ */
+
+/*
+ * We optimise the code below by:
+ *  - building a set of TLB flags that might be set in __cpu_tlb_flags
+ *  - building a set of TLB flags that will always be set in __cpu_tlb_flags
+ *  - if we're going to need __cpu_tlb_flags, access it once and only once
+ *
+ * This allows us to build optimal assembly for the single-CPU type case,
+ * and as close to optimal given the compiler constrants for multi-CPU
+ * case.  We could do better for the multi-CPU case if the compiler
+ * implemented the "%?" method, but this has been discontinued due to too
+ * many people getting it wrong.
+ */
+#define possible_tlb_flags	(v3_possible_flags | \
+				 v4_possible_flags | \
+				 v4wbi_possible_flags | \
+				 fr_possible_flags | \
+				 v4wb_possible_flags | \
+				 v6wbi_possible_flags)
+
+#define always_tlb_flags	(v3_always_flags & \
+				 v4_always_flags & \
+				 v4wbi_always_flags & \
+				 fr_always_flags & \
+				 v4wb_always_flags & \
+				 v6wbi_always_flags)
+
+#define tlb_flag(f)	((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f)))
+
+static inline void local_flush_tlb_all(void)
+{
+	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_WB))
+		dsb();
+
+	if (tlb_flag(TLB_V3_FULL))
+		asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_V4_U_FULL | TLB_V6_U_FULL))
+		asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_V4_D_FULL | TLB_V6_D_FULL))
+		asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
+		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
+}
+
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
+{
+	const int zero = 0;
+	const int asid = ASID(mm);
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_WB))
+		dsb();
+
+	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) {
+		if (tlb_flag(TLB_V3_FULL))
+			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
+		if (tlb_flag(TLB_V4_U_FULL))
+			asm("mcr p15, 0, %0, c8, c7, 0" : : "r" (zero) : "cc");
+		if (tlb_flag(TLB_V4_D_FULL))
+			asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
+		if (tlb_flag(TLB_V4_I_FULL))
+			asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+	}
+
+	if (tlb_flag(TLB_V6_U_ASID))
+		asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc");
+	if (tlb_flag(TLB_V6_D_ASID))
+		asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc");
+	if (tlb_flag(TLB_V6_I_ASID))
+		asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+	}
+}
+
+static inline void
+local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
+{
+	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
+
+	if (tlb_flag(TLB_WB))
+		dsb();
+
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+		if (tlb_flag(TLB_V3_PAGE))
+			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc");
+		if (tlb_flag(TLB_V4_U_PAGE))
+			asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc");
+		if (tlb_flag(TLB_V4_D_PAGE))
+			asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
+		if (tlb_flag(TLB_V4_I_PAGE))
+			asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+		if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
+			asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+	}
+
+	if (tlb_flag(TLB_V6_U_PAGE))
+		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (uaddr) : "cc");
+	if (tlb_flag(TLB_V6_D_PAGE))
+		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
+	if (tlb_flag(TLB_V6_I_PAGE))
+		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+	}
+}
+
+static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
+{
+	const int zero = 0;
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	kaddr &= PAGE_MASK;
+
+	if (tlb_flag(TLB_WB))
+		dsb();
+
+	if (tlb_flag(TLB_V3_PAGE))
+		asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V4_U_PAGE))
+		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V4_D_PAGE))
+		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V4_I_PAGE))
+		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
+	if (!tlb_flag(TLB_V4_I_PAGE) && tlb_flag(TLB_V4_I_FULL))
+		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+
+	if (tlb_flag(TLB_V6_U_PAGE))
+		asm("mcr p15, 0, %0, c8, c7, 1" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V6_D_PAGE))
+		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
+	if (tlb_flag(TLB_V6_I_PAGE))
+		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
+}
+
+/*
+ *	flush_pmd_entry
+ *
+ *	Flush a PMD entry (word aligned, or double-word aligned) to
+ *	RAM if the TLB for the CPU we are running on requires this.
+ *	This is typically used when we are creating PMD entries.
+ *
+ *	clean_pmd_entry
+ *
+ *	Clean (but don't drain the write buffer) if the CPU requires
+ *	these operations.  This is typically used when we are removing
+ *	PMD entries.
+ */
+static inline void flush_pmd_entry(pmd_t *pmd)
+{
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_DCLEAN))
+		asm("mcr	p15, 0, %0, c7, c10, 1	@ flush_pmd"
+			: : "r" (pmd) : "cc");
+
+	if (tlb_flag(TLB_L2CLEAN_FR))
+		asm("mcr	p15, 1, %0, c15, c9, 1  @ L2 flush_pmd"
+			: : "r" (pmd) : "cc");
+
+	if (tlb_flag(TLB_WB))
+		dsb();
+}
+
+static inline void clean_pmd_entry(pmd_t *pmd)
+{
+	const unsigned int __tlb_flag = __cpu_tlb_flags;
+
+	if (tlb_flag(TLB_DCLEAN))
+		asm("mcr	p15, 0, %0, c7, c10, 1	@ flush_pmd"
+			: : "r" (pmd) : "cc");
+
+	if (tlb_flag(TLB_L2CLEAN_FR))
+		asm("mcr	p15, 1, %0, c15, c9, 1  @ L2 flush_pmd"
+			: : "r" (pmd) : "cc");
+}
+
+#undef tlb_flag
+#undef always_tlb_flags
+#undef possible_tlb_flags
+
+/*
+ * Convert calls to our calling convention.
+ */
+#define local_flush_tlb_range(vma,start,end)	__cpu_flush_user_tlb_range(start,end,vma)
+#define local_flush_tlb_kernel_range(s,e)	__cpu_flush_kern_tlb_range(s,e)
+
+#ifndef CONFIG_SMP
+#define flush_tlb_all		local_flush_tlb_all
+#define flush_tlb_mm		local_flush_tlb_mm
+#define flush_tlb_page		local_flush_tlb_page
+#define flush_tlb_kernel_page	local_flush_tlb_kernel_page
+#define flush_tlb_range		local_flush_tlb_range
+#define flush_tlb_kernel_range	local_flush_tlb_kernel_range
+#else
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr);
+extern void flush_tlb_kernel_page(unsigned long kaddr);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+#endif
+
+/*
+ * if PG_dcache_dirty is set for the page, we need to ensure that any
+ * cache entries for the kernels virtual memory range are written
+ * back to the page.
+ */
+extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte);
+
+#endif
+
+#endif /* CONFIG_MMU */
+
+#endif
diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h
new file mode 100644
index 000000000000..accbd7cad9b5
--- /dev/null
+++ b/arch/arm/include/asm/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_ARM_TOPOLOGY_H
+#define _ASM_ARM_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_ARM_TOPOLOGY_H */
diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h
new file mode 100644
index 000000000000..aa399aec568e
--- /dev/null
+++ b/arch/arm/include/asm/traps.h
@@ -0,0 +1,29 @@
+#ifndef _ASMARM_TRAP_H
+#define _ASMARM_TRAP_H
+
+#include <linux/list.h>
+
+struct undef_hook {
+	struct list_head node;
+	u32 instr_mask;
+	u32 instr_val;
+	u32 cpsr_mask;
+	u32 cpsr_val;
+	int (*fn)(struct pt_regs *regs, unsigned int instr);
+};
+
+void register_undef_hook(struct undef_hook *hook);
+void unregister_undef_hook(struct undef_hook *hook);
+
+static inline int in_exception_text(unsigned long ptr)
+{
+	extern char __exception_text_start[];
+	extern char __exception_text_end[];
+
+	return ptr >= (unsigned long)&__exception_text_start &&
+	       ptr < (unsigned long)&__exception_text_end;
+}
+
+extern void __init early_trap_init(void);
+
+#endif
diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h
new file mode 100644
index 000000000000..345df01534a4
--- /dev/null
+++ b/arch/arm/include/asm/types.h
@@ -0,0 +1,31 @@
+#ifndef __ASM_ARM_TYPES_H
+#define __ASM_ARM_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+typedef u32 dma64_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif
+
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
new file mode 100644
index 000000000000..d0f51ff900b5
--- /dev/null
+++ b/arch/arm/include/asm/uaccess.h
@@ -0,0 +1,444 @@
+/*
+ *  arch/arm/include/asm/uaccess.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASMARM_UACCESS_H
+#define _ASMARM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <asm/errno.h>
+#include <asm/memory.h>
+#include <asm/domain.h>
+#include <asm/system.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+/*
+ * These two are intentionally not defined anywhere - if the kernel
+ * code generates any references to them, that's a bug.
+ */
+extern int __get_user_bad(void);
+extern int __put_user_bad(void);
+
+/*
+ * Note that this is actually 0x1,0000,0000
+ */
+#define KERNEL_DS	0x00000000
+#define get_ds()	(KERNEL_DS)
+
+#ifdef CONFIG_MMU
+
+#define USER_DS		TASK_SIZE
+#define get_fs()	(current_thread_info()->addr_limit)
+
+static inline void set_fs(mm_segment_t fs)
+{
+	current_thread_info()->addr_limit = fs;
+	modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
+}
+
+#define segment_eq(a,b)	((a) == (b))
+
+#define __addr_ok(addr) ({ \
+	unsigned long flag; \
+	__asm__("cmp %2, %0; movlo %0, #0" \
+		: "=&r" (flag) \
+		: "0" (current_thread_info()->addr_limit), "r" (addr) \
+		: "cc"); \
+	(flag == 0); })
+
+/* We use 33-bit arithmetic here... */
+#define __range_ok(addr,size) ({ \
+	unsigned long flag, roksum; \
+	__chk_user_ptr(addr);	\
+	__asm__("adds %1, %2, %3; sbcccs %1, %1, %0; movcc %0, #0" \
+		: "=&r" (flag), "=&r" (roksum) \
+		: "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \
+		: "cc"); \
+	flag; })
+
+/*
+ * Single-value transfer routines.  They automatically use the right
+ * size if we just have the right pointer type.  Note that the functions
+ * which read from user space (*get_*) need to take care not to leak
+ * kernel data even if the calling code is buggy and fails to check
+ * the return value.  This means zeroing out the destination variable
+ * or buffer on error.  Normally this is done out of line by the
+ * fixup code, but there are a few places where it intrudes on the
+ * main code path.  When we only write to user space, there is no
+ * problem.
+ */
+extern int __get_user_1(void *);
+extern int __get_user_2(void *);
+extern int __get_user_4(void *);
+
+#define __get_user_x(__r2,__p,__e,__s,__i...)				\
+	   __asm__ __volatile__ (					\
+		__asmeq("%0", "r0") __asmeq("%1", "r2")			\
+		"bl	__get_user_" #__s				\
+		: "=&r" (__e), "=r" (__r2)				\
+		: "0" (__p)						\
+		: __i, "cc")
+
+#define get_user(x,p)							\
+	({								\
+		register const typeof(*(p)) __user *__p asm("r0") = (p);\
+		register unsigned long __r2 asm("r2");			\
+		register int __e asm("r0");				\
+		switch (sizeof(*(__p))) {				\
+		case 1:							\
+			__get_user_x(__r2, __p, __e, 1, "lr");		\
+	       		break;						\
+		case 2:							\
+			__get_user_x(__r2, __p, __e, 2, "r3", "lr");	\
+			break;						\
+		case 4:							\
+	       		__get_user_x(__r2, __p, __e, 4, "lr");		\
+			break;						\
+		default: __e = __get_user_bad(); break;			\
+		}							\
+		x = (typeof(*(p))) __r2;				\
+		__e;							\
+	})
+
+extern int __put_user_1(void *, unsigned int);
+extern int __put_user_2(void *, unsigned int);
+extern int __put_user_4(void *, unsigned int);
+extern int __put_user_8(void *, unsigned long long);
+
+#define __put_user_x(__r2,__p,__e,__s)					\
+	   __asm__ __volatile__ (					\
+		__asmeq("%0", "r0") __asmeq("%2", "r2")			\
+		"bl	__put_user_" #__s				\
+		: "=&r" (__e)						\
+		: "0" (__p), "r" (__r2)					\
+		: "ip", "lr", "cc")
+
+#define put_user(x,p)							\
+	({								\
+		register const typeof(*(p)) __r2 asm("r2") = (x);	\
+		register const typeof(*(p)) __user *__p asm("r0") = (p);\
+		register int __e asm("r0");				\
+		switch (sizeof(*(__p))) {				\
+		case 1:							\
+			__put_user_x(__r2, __p, __e, 1);		\
+			break;						\
+		case 2:							\
+			__put_user_x(__r2, __p, __e, 2);		\
+			break;						\
+		case 4:							\
+			__put_user_x(__r2, __p, __e, 4);		\
+			break;						\
+		case 8:							\
+			__put_user_x(__r2, __p, __e, 8);		\
+			break;						\
+		default: __e = __put_user_bad(); break;			\
+		}							\
+		__e;							\
+	})
+
+#else /* CONFIG_MMU */
+
+/*
+ * uClinux has only one addr space, so has simplified address limits.
+ */
+#define USER_DS			KERNEL_DS
+
+#define segment_eq(a,b)		(1)
+#define __addr_ok(addr)		(1)
+#define __range_ok(addr,size)	(0)
+#define get_fs()		(KERNEL_DS)
+
+static inline void set_fs(mm_segment_t fs)
+{
+}
+
+#define get_user(x,p)	__get_user(x,p)
+#define put_user(x,p)	__put_user(x,p)
+
+#endif /* CONFIG_MMU */
+
+#define access_ok(type,addr,size)	(__range_ok(addr,size) == 0)
+
+/*
+ * The "__xxx" versions of the user access functions do not verify the
+ * address space - it must have been done previously with a separate
+ * "access_ok()" call.
+ *
+ * The "xxx_error" versions set the third argument to EFAULT if an
+ * error occurs, and leave it unchanged on success.  Note that these
+ * versions are void (ie, don't return a value as such).
+ */
+#define __get_user(x,ptr)						\
+({									\
+	long __gu_err = 0;						\
+	__get_user_err((x),(ptr),__gu_err);				\
+	__gu_err;							\
+})
+
+#define __get_user_error(x,ptr,err)					\
+({									\
+	__get_user_err((x),(ptr),err);					\
+	(void) 0;							\
+})
+
+#define __get_user_err(x,ptr,err)					\
+do {									\
+	unsigned long __gu_addr = (unsigned long)(ptr);			\
+	unsigned long __gu_val;						\
+	__chk_user_ptr(ptr);						\
+	switch (sizeof(*(ptr))) {					\
+	case 1:	__get_user_asm_byte(__gu_val,__gu_addr,err);	break;	\
+	case 2:	__get_user_asm_half(__gu_val,__gu_addr,err);	break;	\
+	case 4:	__get_user_asm_word(__gu_val,__gu_addr,err);	break;	\
+	default: (__gu_val) = __get_user_bad();				\
+	}								\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+} while (0)
+
+#define __get_user_asm_byte(x,addr,err)				\
+	__asm__ __volatile__(					\
+	"1:	ldrbt	%1,[%2],#0\n"				\
+	"2:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"3:	mov	%0, %3\n"				\
+	"	mov	%1, #0\n"				\
+	"	b	2b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 3b\n"				\
+	"	.previous"					\
+	: "+r" (err), "=&r" (x)					\
+	: "r" (addr), "i" (-EFAULT)				\
+	: "cc")
+
+#ifndef __ARMEB__
+#define __get_user_asm_half(x,__gu_addr,err)			\
+({								\
+	unsigned long __b1, __b2;				\
+	__get_user_asm_byte(__b1, __gu_addr, err);		\
+	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
+	(x) = __b1 | (__b2 << 8);				\
+})
+#else
+#define __get_user_asm_half(x,__gu_addr,err)			\
+({								\
+	unsigned long __b1, __b2;				\
+	__get_user_asm_byte(__b1, __gu_addr, err);		\
+	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
+	(x) = (__b1 << 8) | __b2;				\
+})
+#endif
+
+#define __get_user_asm_word(x,addr,err)				\
+	__asm__ __volatile__(					\
+	"1:	ldrt	%1,[%2],#0\n"				\
+	"2:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"3:	mov	%0, %3\n"				\
+	"	mov	%1, #0\n"				\
+	"	b	2b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 3b\n"				\
+	"	.previous"					\
+	: "+r" (err), "=&r" (x)					\
+	: "r" (addr), "i" (-EFAULT)				\
+	: "cc")
+
+#define __put_user(x,ptr)						\
+({									\
+	long __pu_err = 0;						\
+	__put_user_err((x),(ptr),__pu_err);				\
+	__pu_err;							\
+})
+
+#define __put_user_error(x,ptr,err)					\
+({									\
+	__put_user_err((x),(ptr),err);					\
+	(void) 0;							\
+})
+
+#define __put_user_err(x,ptr,err)					\
+do {									\
+	unsigned long __pu_addr = (unsigned long)(ptr);			\
+	__typeof__(*(ptr)) __pu_val = (x);				\
+	__chk_user_ptr(ptr);						\
+	switch (sizeof(*(ptr))) {					\
+	case 1: __put_user_asm_byte(__pu_val,__pu_addr,err);	break;	\
+	case 2: __put_user_asm_half(__pu_val,__pu_addr,err);	break;	\
+	case 4: __put_user_asm_word(__pu_val,__pu_addr,err);	break;	\
+	case 8:	__put_user_asm_dword(__pu_val,__pu_addr,err);	break;	\
+	default: __put_user_bad();					\
+	}								\
+} while (0)
+
+#define __put_user_asm_byte(x,__pu_addr,err)			\
+	__asm__ __volatile__(					\
+	"1:	strbt	%1,[%2],#0\n"				\
+	"2:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"3:	mov	%0, %3\n"				\
+	"	b	2b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 3b\n"				\
+	"	.previous"					\
+	: "+r" (err)						\
+	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
+	: "cc")
+
+#ifndef __ARMEB__
+#define __put_user_asm_half(x,__pu_addr,err)			\
+({								\
+	unsigned long __temp = (unsigned long)(x);		\
+	__put_user_asm_byte(__temp, __pu_addr, err);		\
+	__put_user_asm_byte(__temp >> 8, __pu_addr + 1, err);	\
+})
+#else
+#define __put_user_asm_half(x,__pu_addr,err)			\
+({								\
+	unsigned long __temp = (unsigned long)(x);		\
+	__put_user_asm_byte(__temp >> 8, __pu_addr, err);	\
+	__put_user_asm_byte(__temp, __pu_addr + 1, err);	\
+})
+#endif
+
+#define __put_user_asm_word(x,__pu_addr,err)			\
+	__asm__ __volatile__(					\
+	"1:	strt	%1,[%2],#0\n"				\
+	"2:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"3:	mov	%0, %3\n"				\
+	"	b	2b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 3b\n"				\
+	"	.previous"					\
+	: "+r" (err)						\
+	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
+	: "cc")
+
+#ifndef __ARMEB__
+#define	__reg_oper0	"%R2"
+#define	__reg_oper1	"%Q2"
+#else
+#define	__reg_oper0	"%Q2"
+#define	__reg_oper1	"%R2"
+#endif
+
+#define __put_user_asm_dword(x,__pu_addr,err)			\
+	__asm__ __volatile__(					\
+	"1:	strt	" __reg_oper1 ", [%1], #4\n"		\
+	"2:	strt	" __reg_oper0 ", [%1], #0\n"		\
+	"3:\n"							\
+	"	.section .fixup,\"ax\"\n"			\
+	"	.align	2\n"					\
+	"4:	mov	%0, %3\n"				\
+	"	b	3b\n"					\
+	"	.previous\n"					\
+	"	.section __ex_table,\"a\"\n"			\
+	"	.align	3\n"					\
+	"	.long	1b, 4b\n"				\
+	"	.long	2b, 4b\n"				\
+	"	.previous"					\
+	: "+r" (err), "+r" (__pu_addr)				\
+	: "r" (x), "i" (-EFAULT)				\
+	: "cc")
+
+
+#ifdef CONFIG_MMU
+extern unsigned long __must_check __copy_from_user(void *to, const void __user *from, unsigned long n);
+extern unsigned long __must_check __copy_to_user(void __user *to, const void *from, unsigned long n);
+extern unsigned long __must_check __clear_user(void __user *addr, unsigned long n);
+#else
+#define __copy_from_user(to,from,n)	(memcpy(to, (void __force *)from, n), 0)
+#define __copy_to_user(to,from,n)	(memcpy((void __force *)to, from, n), 0)
+#define __clear_user(addr,n)		(memset((void __force *)addr, 0, n), 0)
+#endif
+
+extern unsigned long __must_check __strncpy_from_user(char *to, const char __user *from, unsigned long count);
+extern unsigned long __must_check __strnlen_user(const char __user *s, long n);
+
+static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	if (access_ok(VERIFY_READ, from, n))
+		n = __copy_from_user(to, from, n);
+	else /* security hole - plug it */
+		memzero(to, n);
+	return n;
+}
+
+static inline unsigned long __must_check copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = __copy_to_user(to, from, n);
+	return n;
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+static inline unsigned long __must_check clear_user(void __user *to, unsigned long n)
+{
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = __clear_user(to, n);
+	return n;
+}
+
+static inline long __must_check strncpy_from_user(char *dst, const char __user *src, long count)
+{
+	long res = -EFAULT;
+	if (access_ok(VERIFY_READ, src, 1))
+		res = __strncpy_from_user(dst, src, count);
+	return res;
+}
+
+#define strlen_user(s)	strnlen_user(s, ~0UL >> 1)
+
+static inline long __must_check strnlen_user(const char __user *s, long n)
+{
+	unsigned long res = 0;
+
+	if (__addr_ok(s))
+		res = __strnlen_user(s, n);
+
+	return res;
+}
+
+#endif /* _ASMARM_UACCESS_H */
diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h
new file mode 100644
index 000000000000..bf65e9f4525d
--- /dev/null
+++ b/arch/arm/include/asm/ucontext.h
@@ -0,0 +1,103 @@
+#ifndef _ASMARM_UCONTEXT_H
+#define _ASMARM_UCONTEXT_H
+
+#include <asm/fpstate.h>
+
+/*
+ * struct sigcontext only has room for the basic registers, but struct
+ * ucontext now has room for all registers which need to be saved and
+ * restored.  Coprocessor registers are stored in uc_regspace.  Each
+ * coprocessor's saved state should start with a documented 32-bit magic
+ * number, followed by a 32-bit word giving the coproccesor's saved size.
+ * uc_regspace may be expanded if necessary, although this takes some
+ * coordination with glibc.
+ */
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;
+	/* Allow for uc_sigmask growth.  Glibc uses a 1024-bit sigset_t.  */
+	int		  __unused[32 - (sizeof (sigset_t) / sizeof (int))];
+	/* Last for extensibility.  Eight byte aligned because some
+	   coprocessors require eight byte alignment.  */
+ 	unsigned long	  uc_regspace[128] __attribute__((__aligned__(8)));
+};
+
+#ifdef __KERNEL__
+
+/*
+ * Coprocessor save state.  The magic values and specific
+ * coprocessor's layouts are part of the userspace ABI.  Each one of
+ * these should be a multiple of eight bytes and aligned to eight
+ * bytes, to prevent unpredictable padding in the signal frame.
+ */
+
+#ifdef CONFIG_CRUNCH
+#define CRUNCH_MAGIC		0x5065cf03
+#define CRUNCH_STORAGE_SIZE	(CRUNCH_SIZE + 8)
+
+struct crunch_sigframe {
+	unsigned long	magic;
+	unsigned long	size;
+	struct crunch_state	storage;
+} __attribute__((__aligned__(8)));
+#endif
+
+#ifdef CONFIG_IWMMXT
+/* iwmmxt_area is 0x98 bytes long, preceeded by 8 bytes of signature */
+#define IWMMXT_MAGIC		0x12ef842a
+#define IWMMXT_STORAGE_SIZE	(IWMMXT_SIZE + 8)
+
+struct iwmmxt_sigframe {
+	unsigned long	magic;
+	unsigned long	size;
+	struct iwmmxt_struct storage;
+} __attribute__((__aligned__(8)));
+#endif /* CONFIG_IWMMXT */
+
+#ifdef CONFIG_VFP
+#if __LINUX_ARM_ARCH__ < 6
+/* For ARM pre-v6, we use fstmiax and fldmiax.  This adds one extra
+ * word after the registers, and a word of padding at the end for
+ * alignment.  */
+#define VFP_MAGIC		0x56465001
+#define VFP_STORAGE_SIZE	152
+#else
+#define VFP_MAGIC		0x56465002
+#define VFP_STORAGE_SIZE	144
+#endif
+
+struct vfp_sigframe
+{
+	unsigned long		magic;
+	unsigned long		size;
+	union vfp_state		storage;
+};
+#endif /* CONFIG_VFP */
+
+/*
+ * Auxiliary signal frame.  This saves stuff like FP state.
+ * The layout of this structure is not part of the user ABI,
+ * because the config options aren't.  uc_regspace is really
+ * one of these.
+ */
+struct aux_sigframe {
+#ifdef CONFIG_CRUNCH
+	struct crunch_sigframe	crunch;
+#endif
+#ifdef CONFIG_IWMMXT
+	struct iwmmxt_sigframe	iwmmxt;
+#endif
+#if 0 && defined CONFIG_VFP /* Not yet saved.  */
+	struct vfp_sigframe	vfp;
+#endif
+	/* Something that isn't a valid magic number for any coprocessor.  */
+	unsigned long		end_magic;
+} __attribute__((__aligned__(8)));
+
+#endif
+
+#endif /* !_ASMARM_UCONTEXT_H */
diff --git a/arch/arm/include/asm/unaligned.h b/arch/arm/include/asm/unaligned.h
new file mode 100644
index 000000000000..44593a894903
--- /dev/null
+++ b/arch/arm/include/asm/unaligned.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_ARM_UNALIGNED_H
+#define _ASM_ARM_UNALIGNED_H
+
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/be_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+/*
+ * Select endianness
+ */
+#ifndef __ARMEB__
+#define get_unaligned	__get_unaligned_le
+#define put_unaligned	__put_unaligned_le
+#else
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+#endif
+
+#endif /* _ASM_ARM_UNALIGNED_H */
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
new file mode 100644
index 000000000000..f95fbb2fcb5f
--- /dev/null
+++ b/arch/arm/include/asm/unistd.h
@@ -0,0 +1,450 @@
+/*
+ *  arch/arm/include/asm/unistd.h
+ *
+ *  Copyright (C) 2001-2005 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Please forward _all_ changes to this file to rmk@arm.linux.org.uk,
+ * no matter what the change is.  Thanks!
+ */
+#ifndef __ASM_ARM_UNISTD_H
+#define __ASM_ARM_UNISTD_H
+
+#define __NR_OABI_SYSCALL_BASE	0x900000
+
+#if defined(__thumb__) || defined(__ARM_EABI__)
+#define __NR_SYSCALL_BASE	0
+#else
+#define __NR_SYSCALL_BASE	__NR_OABI_SYSCALL_BASE
+#endif
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall		(__NR_SYSCALL_BASE+  0)
+#define __NR_exit			(__NR_SYSCALL_BASE+  1)
+#define __NR_fork			(__NR_SYSCALL_BASE+  2)
+#define __NR_read			(__NR_SYSCALL_BASE+  3)
+#define __NR_write			(__NR_SYSCALL_BASE+  4)
+#define __NR_open			(__NR_SYSCALL_BASE+  5)
+#define __NR_close			(__NR_SYSCALL_BASE+  6)
+					/* 7 was sys_waitpid */
+#define __NR_creat			(__NR_SYSCALL_BASE+  8)
+#define __NR_link			(__NR_SYSCALL_BASE+  9)
+#define __NR_unlink			(__NR_SYSCALL_BASE+ 10)
+#define __NR_execve			(__NR_SYSCALL_BASE+ 11)
+#define __NR_chdir			(__NR_SYSCALL_BASE+ 12)
+#define __NR_time			(__NR_SYSCALL_BASE+ 13)
+#define __NR_mknod			(__NR_SYSCALL_BASE+ 14)
+#define __NR_chmod			(__NR_SYSCALL_BASE+ 15)
+#define __NR_lchown			(__NR_SYSCALL_BASE+ 16)
+					/* 17 was sys_break */
+					/* 18 was sys_stat */
+#define __NR_lseek			(__NR_SYSCALL_BASE+ 19)
+#define __NR_getpid			(__NR_SYSCALL_BASE+ 20)
+#define __NR_mount			(__NR_SYSCALL_BASE+ 21)
+#define __NR_umount			(__NR_SYSCALL_BASE+ 22)
+#define __NR_setuid			(__NR_SYSCALL_BASE+ 23)
+#define __NR_getuid			(__NR_SYSCALL_BASE+ 24)
+#define __NR_stime			(__NR_SYSCALL_BASE+ 25)
+#define __NR_ptrace			(__NR_SYSCALL_BASE+ 26)
+#define __NR_alarm			(__NR_SYSCALL_BASE+ 27)
+					/* 28 was sys_fstat */
+#define __NR_pause			(__NR_SYSCALL_BASE+ 29)
+#define __NR_utime			(__NR_SYSCALL_BASE+ 30)
+					/* 31 was sys_stty */
+					/* 32 was sys_gtty */
+#define __NR_access			(__NR_SYSCALL_BASE+ 33)
+#define __NR_nice			(__NR_SYSCALL_BASE+ 34)
+					/* 35 was sys_ftime */
+#define __NR_sync			(__NR_SYSCALL_BASE+ 36)
+#define __NR_kill			(__NR_SYSCALL_BASE+ 37)
+#define __NR_rename			(__NR_SYSCALL_BASE+ 38)
+#define __NR_mkdir			(__NR_SYSCALL_BASE+ 39)
+#define __NR_rmdir			(__NR_SYSCALL_BASE+ 40)
+#define __NR_dup			(__NR_SYSCALL_BASE+ 41)
+#define __NR_pipe			(__NR_SYSCALL_BASE+ 42)
+#define __NR_times			(__NR_SYSCALL_BASE+ 43)
+					/* 44 was sys_prof */
+#define __NR_brk			(__NR_SYSCALL_BASE+ 45)
+#define __NR_setgid			(__NR_SYSCALL_BASE+ 46)
+#define __NR_getgid			(__NR_SYSCALL_BASE+ 47)
+					/* 48 was sys_signal */
+#define __NR_geteuid			(__NR_SYSCALL_BASE+ 49)
+#define __NR_getegid			(__NR_SYSCALL_BASE+ 50)
+#define __NR_acct			(__NR_SYSCALL_BASE+ 51)
+#define __NR_umount2			(__NR_SYSCALL_BASE+ 52)
+					/* 53 was sys_lock */
+#define __NR_ioctl			(__NR_SYSCALL_BASE+ 54)
+#define __NR_fcntl			(__NR_SYSCALL_BASE+ 55)
+					/* 56 was sys_mpx */
+#define __NR_setpgid			(__NR_SYSCALL_BASE+ 57)
+					/* 58 was sys_ulimit */
+					/* 59 was sys_olduname */
+#define __NR_umask			(__NR_SYSCALL_BASE+ 60)
+#define __NR_chroot			(__NR_SYSCALL_BASE+ 61)
+#define __NR_ustat			(__NR_SYSCALL_BASE+ 62)
+#define __NR_dup2			(__NR_SYSCALL_BASE+ 63)
+#define __NR_getppid			(__NR_SYSCALL_BASE+ 64)
+#define __NR_getpgrp			(__NR_SYSCALL_BASE+ 65)
+#define __NR_setsid			(__NR_SYSCALL_BASE+ 66)
+#define __NR_sigaction			(__NR_SYSCALL_BASE+ 67)
+					/* 68 was sys_sgetmask */
+					/* 69 was sys_ssetmask */
+#define __NR_setreuid			(__NR_SYSCALL_BASE+ 70)
+#define __NR_setregid			(__NR_SYSCALL_BASE+ 71)
+#define __NR_sigsuspend			(__NR_SYSCALL_BASE+ 72)
+#define __NR_sigpending			(__NR_SYSCALL_BASE+ 73)
+#define __NR_sethostname		(__NR_SYSCALL_BASE+ 74)
+#define __NR_setrlimit			(__NR_SYSCALL_BASE+ 75)
+#define __NR_getrlimit			(__NR_SYSCALL_BASE+ 76)	/* Back compat 2GB limited rlimit */
+#define __NR_getrusage			(__NR_SYSCALL_BASE+ 77)
+#define __NR_gettimeofday		(__NR_SYSCALL_BASE+ 78)
+#define __NR_settimeofday		(__NR_SYSCALL_BASE+ 79)
+#define __NR_getgroups			(__NR_SYSCALL_BASE+ 80)
+#define __NR_setgroups			(__NR_SYSCALL_BASE+ 81)
+#define __NR_select			(__NR_SYSCALL_BASE+ 82)
+#define __NR_symlink			(__NR_SYSCALL_BASE+ 83)
+					/* 84 was sys_lstat */
+#define __NR_readlink			(__NR_SYSCALL_BASE+ 85)
+#define __NR_uselib			(__NR_SYSCALL_BASE+ 86)
+#define __NR_swapon			(__NR_SYSCALL_BASE+ 87)
+#define __NR_reboot			(__NR_SYSCALL_BASE+ 88)
+#define __NR_readdir			(__NR_SYSCALL_BASE+ 89)
+#define __NR_mmap			(__NR_SYSCALL_BASE+ 90)
+#define __NR_munmap			(__NR_SYSCALL_BASE+ 91)
+#define __NR_truncate			(__NR_SYSCALL_BASE+ 92)
+#define __NR_ftruncate			(__NR_SYSCALL_BASE+ 93)
+#define __NR_fchmod			(__NR_SYSCALL_BASE+ 94)
+#define __NR_fchown			(__NR_SYSCALL_BASE+ 95)
+#define __NR_getpriority		(__NR_SYSCALL_BASE+ 96)
+#define __NR_setpriority		(__NR_SYSCALL_BASE+ 97)
+					/* 98 was sys_profil */
+#define __NR_statfs			(__NR_SYSCALL_BASE+ 99)
+#define __NR_fstatfs			(__NR_SYSCALL_BASE+100)
+					/* 101 was sys_ioperm */
+#define __NR_socketcall			(__NR_SYSCALL_BASE+102)
+#define __NR_syslog			(__NR_SYSCALL_BASE+103)
+#define __NR_setitimer			(__NR_SYSCALL_BASE+104)
+#define __NR_getitimer			(__NR_SYSCALL_BASE+105)
+#define __NR_stat			(__NR_SYSCALL_BASE+106)
+#define __NR_lstat			(__NR_SYSCALL_BASE+107)
+#define __NR_fstat			(__NR_SYSCALL_BASE+108)
+					/* 109 was sys_uname */
+					/* 110 was sys_iopl */
+#define __NR_vhangup			(__NR_SYSCALL_BASE+111)
+					/* 112 was sys_idle */
+#define __NR_syscall			(__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */
+#define __NR_wait4			(__NR_SYSCALL_BASE+114)
+#define __NR_swapoff			(__NR_SYSCALL_BASE+115)
+#define __NR_sysinfo			(__NR_SYSCALL_BASE+116)
+#define __NR_ipc			(__NR_SYSCALL_BASE+117)
+#define __NR_fsync			(__NR_SYSCALL_BASE+118)
+#define __NR_sigreturn			(__NR_SYSCALL_BASE+119)
+#define __NR_clone			(__NR_SYSCALL_BASE+120)
+#define __NR_setdomainname		(__NR_SYSCALL_BASE+121)
+#define __NR_uname			(__NR_SYSCALL_BASE+122)
+					/* 123 was sys_modify_ldt */
+#define __NR_adjtimex			(__NR_SYSCALL_BASE+124)
+#define __NR_mprotect			(__NR_SYSCALL_BASE+125)
+#define __NR_sigprocmask		(__NR_SYSCALL_BASE+126)
+					/* 127 was sys_create_module */
+#define __NR_init_module		(__NR_SYSCALL_BASE+128)
+#define __NR_delete_module		(__NR_SYSCALL_BASE+129)
+					/* 130 was sys_get_kernel_syms */
+#define __NR_quotactl			(__NR_SYSCALL_BASE+131)
+#define __NR_getpgid			(__NR_SYSCALL_BASE+132)
+#define __NR_fchdir			(__NR_SYSCALL_BASE+133)
+#define __NR_bdflush			(__NR_SYSCALL_BASE+134)
+#define __NR_sysfs			(__NR_SYSCALL_BASE+135)
+#define __NR_personality		(__NR_SYSCALL_BASE+136)
+					/* 137 was sys_afs_syscall */
+#define __NR_setfsuid			(__NR_SYSCALL_BASE+138)
+#define __NR_setfsgid			(__NR_SYSCALL_BASE+139)
+#define __NR__llseek			(__NR_SYSCALL_BASE+140)
+#define __NR_getdents			(__NR_SYSCALL_BASE+141)
+#define __NR__newselect			(__NR_SYSCALL_BASE+142)
+#define __NR_flock			(__NR_SYSCALL_BASE+143)
+#define __NR_msync			(__NR_SYSCALL_BASE+144)
+#define __NR_readv			(__NR_SYSCALL_BASE+145)
+#define __NR_writev			(__NR_SYSCALL_BASE+146)
+#define __NR_getsid			(__NR_SYSCALL_BASE+147)
+#define __NR_fdatasync			(__NR_SYSCALL_BASE+148)
+#define __NR__sysctl			(__NR_SYSCALL_BASE+149)
+#define __NR_mlock			(__NR_SYSCALL_BASE+150)
+#define __NR_munlock			(__NR_SYSCALL_BASE+151)
+#define __NR_mlockall			(__NR_SYSCALL_BASE+152)
+#define __NR_munlockall			(__NR_SYSCALL_BASE+153)
+#define __NR_sched_setparam		(__NR_SYSCALL_BASE+154)
+#define __NR_sched_getparam		(__NR_SYSCALL_BASE+155)
+#define __NR_sched_setscheduler		(__NR_SYSCALL_BASE+156)
+#define __NR_sched_getscheduler		(__NR_SYSCALL_BASE+157)
+#define __NR_sched_yield		(__NR_SYSCALL_BASE+158)
+#define __NR_sched_get_priority_max	(__NR_SYSCALL_BASE+159)
+#define __NR_sched_get_priority_min	(__NR_SYSCALL_BASE+160)
+#define __NR_sched_rr_get_interval	(__NR_SYSCALL_BASE+161)
+#define __NR_nanosleep			(__NR_SYSCALL_BASE+162)
+#define __NR_mremap			(__NR_SYSCALL_BASE+163)
+#define __NR_setresuid			(__NR_SYSCALL_BASE+164)
+#define __NR_getresuid			(__NR_SYSCALL_BASE+165)
+					/* 166 was sys_vm86 */
+					/* 167 was sys_query_module */
+#define __NR_poll			(__NR_SYSCALL_BASE+168)
+#define __NR_nfsservctl			(__NR_SYSCALL_BASE+169)
+#define __NR_setresgid			(__NR_SYSCALL_BASE+170)
+#define __NR_getresgid			(__NR_SYSCALL_BASE+171)
+#define __NR_prctl			(__NR_SYSCALL_BASE+172)
+#define __NR_rt_sigreturn		(__NR_SYSCALL_BASE+173)
+#define __NR_rt_sigaction		(__NR_SYSCALL_BASE+174)
+#define __NR_rt_sigprocmask		(__NR_SYSCALL_BASE+175)
+#define __NR_rt_sigpending		(__NR_SYSCALL_BASE+176)
+#define __NR_rt_sigtimedwait		(__NR_SYSCALL_BASE+177)
+#define __NR_rt_sigqueueinfo		(__NR_SYSCALL_BASE+178)
+#define __NR_rt_sigsuspend		(__NR_SYSCALL_BASE+179)
+#define __NR_pread64			(__NR_SYSCALL_BASE+180)
+#define __NR_pwrite64			(__NR_SYSCALL_BASE+181)
+#define __NR_chown			(__NR_SYSCALL_BASE+182)
+#define __NR_getcwd			(__NR_SYSCALL_BASE+183)
+#define __NR_capget			(__NR_SYSCALL_BASE+184)
+#define __NR_capset			(__NR_SYSCALL_BASE+185)
+#define __NR_sigaltstack		(__NR_SYSCALL_BASE+186)
+#define __NR_sendfile			(__NR_SYSCALL_BASE+187)
+					/* 188 reserved */
+					/* 189 reserved */
+#define __NR_vfork			(__NR_SYSCALL_BASE+190)
+#define __NR_ugetrlimit			(__NR_SYSCALL_BASE+191)	/* SuS compliant getrlimit */
+#define __NR_mmap2			(__NR_SYSCALL_BASE+192)
+#define __NR_truncate64			(__NR_SYSCALL_BASE+193)
+#define __NR_ftruncate64		(__NR_SYSCALL_BASE+194)
+#define __NR_stat64			(__NR_SYSCALL_BASE+195)
+#define __NR_lstat64			(__NR_SYSCALL_BASE+196)
+#define __NR_fstat64			(__NR_SYSCALL_BASE+197)
+#define __NR_lchown32			(__NR_SYSCALL_BASE+198)
+#define __NR_getuid32			(__NR_SYSCALL_BASE+199)
+#define __NR_getgid32			(__NR_SYSCALL_BASE+200)
+#define __NR_geteuid32			(__NR_SYSCALL_BASE+201)
+#define __NR_getegid32			(__NR_SYSCALL_BASE+202)
+#define __NR_setreuid32			(__NR_SYSCALL_BASE+203)
+#define __NR_setregid32			(__NR_SYSCALL_BASE+204)
+#define __NR_getgroups32		(__NR_SYSCALL_BASE+205)
+#define __NR_setgroups32		(__NR_SYSCALL_BASE+206)
+#define __NR_fchown32			(__NR_SYSCALL_BASE+207)
+#define __NR_setresuid32		(__NR_SYSCALL_BASE+208)
+#define __NR_getresuid32		(__NR_SYSCALL_BASE+209)
+#define __NR_setresgid32		(__NR_SYSCALL_BASE+210)
+#define __NR_getresgid32		(__NR_SYSCALL_BASE+211)
+#define __NR_chown32			(__NR_SYSCALL_BASE+212)
+#define __NR_setuid32			(__NR_SYSCALL_BASE+213)
+#define __NR_setgid32			(__NR_SYSCALL_BASE+214)
+#define __NR_setfsuid32			(__NR_SYSCALL_BASE+215)
+#define __NR_setfsgid32			(__NR_SYSCALL_BASE+216)
+#define __NR_getdents64			(__NR_SYSCALL_BASE+217)
+#define __NR_pivot_root			(__NR_SYSCALL_BASE+218)
+#define __NR_mincore			(__NR_SYSCALL_BASE+219)
+#define __NR_madvise			(__NR_SYSCALL_BASE+220)
+#define __NR_fcntl64			(__NR_SYSCALL_BASE+221)
+					/* 222 for tux */
+					/* 223 is unused */
+#define __NR_gettid			(__NR_SYSCALL_BASE+224)
+#define __NR_readahead			(__NR_SYSCALL_BASE+225)
+#define __NR_setxattr			(__NR_SYSCALL_BASE+226)
+#define __NR_lsetxattr			(__NR_SYSCALL_BASE+227)
+#define __NR_fsetxattr			(__NR_SYSCALL_BASE+228)
+#define __NR_getxattr			(__NR_SYSCALL_BASE+229)
+#define __NR_lgetxattr			(__NR_SYSCALL_BASE+230)
+#define __NR_fgetxattr			(__NR_SYSCALL_BASE+231)
+#define __NR_listxattr			(__NR_SYSCALL_BASE+232)
+#define __NR_llistxattr			(__NR_SYSCALL_BASE+233)
+#define __NR_flistxattr			(__NR_SYSCALL_BASE+234)
+#define __NR_removexattr		(__NR_SYSCALL_BASE+235)
+#define __NR_lremovexattr		(__NR_SYSCALL_BASE+236)
+#define __NR_fremovexattr		(__NR_SYSCALL_BASE+237)
+#define __NR_tkill			(__NR_SYSCALL_BASE+238)
+#define __NR_sendfile64			(__NR_SYSCALL_BASE+239)
+#define __NR_futex			(__NR_SYSCALL_BASE+240)
+#define __NR_sched_setaffinity		(__NR_SYSCALL_BASE+241)
+#define __NR_sched_getaffinity		(__NR_SYSCALL_BASE+242)
+#define __NR_io_setup			(__NR_SYSCALL_BASE+243)
+#define __NR_io_destroy			(__NR_SYSCALL_BASE+244)
+#define __NR_io_getevents		(__NR_SYSCALL_BASE+245)
+#define __NR_io_submit			(__NR_SYSCALL_BASE+246)
+#define __NR_io_cancel			(__NR_SYSCALL_BASE+247)
+#define __NR_exit_group			(__NR_SYSCALL_BASE+248)
+#define __NR_lookup_dcookie		(__NR_SYSCALL_BASE+249)
+#define __NR_epoll_create		(__NR_SYSCALL_BASE+250)
+#define __NR_epoll_ctl			(__NR_SYSCALL_BASE+251)
+#define __NR_epoll_wait			(__NR_SYSCALL_BASE+252)
+#define __NR_remap_file_pages		(__NR_SYSCALL_BASE+253)
+					/* 254 for set_thread_area */
+					/* 255 for get_thread_area */
+#define __NR_set_tid_address		(__NR_SYSCALL_BASE+256)
+#define __NR_timer_create		(__NR_SYSCALL_BASE+257)
+#define __NR_timer_settime		(__NR_SYSCALL_BASE+258)
+#define __NR_timer_gettime		(__NR_SYSCALL_BASE+259)
+#define __NR_timer_getoverrun		(__NR_SYSCALL_BASE+260)
+#define __NR_timer_delete		(__NR_SYSCALL_BASE+261)
+#define __NR_clock_settime		(__NR_SYSCALL_BASE+262)
+#define __NR_clock_gettime		(__NR_SYSCALL_BASE+263)
+#define __NR_clock_getres		(__NR_SYSCALL_BASE+264)
+#define __NR_clock_nanosleep		(__NR_SYSCALL_BASE+265)
+#define __NR_statfs64			(__NR_SYSCALL_BASE+266)
+#define __NR_fstatfs64			(__NR_SYSCALL_BASE+267)
+#define __NR_tgkill			(__NR_SYSCALL_BASE+268)
+#define __NR_utimes			(__NR_SYSCALL_BASE+269)
+#define __NR_arm_fadvise64_64		(__NR_SYSCALL_BASE+270)
+#define __NR_pciconfig_iobase		(__NR_SYSCALL_BASE+271)
+#define __NR_pciconfig_read		(__NR_SYSCALL_BASE+272)
+#define __NR_pciconfig_write		(__NR_SYSCALL_BASE+273)
+#define __NR_mq_open			(__NR_SYSCALL_BASE+274)
+#define __NR_mq_unlink			(__NR_SYSCALL_BASE+275)
+#define __NR_mq_timedsend		(__NR_SYSCALL_BASE+276)
+#define __NR_mq_timedreceive		(__NR_SYSCALL_BASE+277)
+#define __NR_mq_notify			(__NR_SYSCALL_BASE+278)
+#define __NR_mq_getsetattr		(__NR_SYSCALL_BASE+279)
+#define __NR_waitid			(__NR_SYSCALL_BASE+280)
+#define __NR_socket			(__NR_SYSCALL_BASE+281)
+#define __NR_bind			(__NR_SYSCALL_BASE+282)
+#define __NR_connect			(__NR_SYSCALL_BASE+283)
+#define __NR_listen			(__NR_SYSCALL_BASE+284)
+#define __NR_accept			(__NR_SYSCALL_BASE+285)
+#define __NR_getsockname		(__NR_SYSCALL_BASE+286)
+#define __NR_getpeername		(__NR_SYSCALL_BASE+287)
+#define __NR_socketpair			(__NR_SYSCALL_BASE+288)
+#define __NR_send			(__NR_SYSCALL_BASE+289)
+#define __NR_sendto			(__NR_SYSCALL_BASE+290)
+#define __NR_recv			(__NR_SYSCALL_BASE+291)
+#define __NR_recvfrom			(__NR_SYSCALL_BASE+292)
+#define __NR_shutdown			(__NR_SYSCALL_BASE+293)
+#define __NR_setsockopt			(__NR_SYSCALL_BASE+294)
+#define __NR_getsockopt			(__NR_SYSCALL_BASE+295)
+#define __NR_sendmsg			(__NR_SYSCALL_BASE+296)
+#define __NR_recvmsg			(__NR_SYSCALL_BASE+297)
+#define __NR_semop			(__NR_SYSCALL_BASE+298)
+#define __NR_semget			(__NR_SYSCALL_BASE+299)
+#define __NR_semctl			(__NR_SYSCALL_BASE+300)
+#define __NR_msgsnd			(__NR_SYSCALL_BASE+301)
+#define __NR_msgrcv			(__NR_SYSCALL_BASE+302)
+#define __NR_msgget			(__NR_SYSCALL_BASE+303)
+#define __NR_msgctl			(__NR_SYSCALL_BASE+304)
+#define __NR_shmat			(__NR_SYSCALL_BASE+305)
+#define __NR_shmdt			(__NR_SYSCALL_BASE+306)
+#define __NR_shmget			(__NR_SYSCALL_BASE+307)
+#define __NR_shmctl			(__NR_SYSCALL_BASE+308)
+#define __NR_add_key			(__NR_SYSCALL_BASE+309)
+#define __NR_request_key		(__NR_SYSCALL_BASE+310)
+#define __NR_keyctl			(__NR_SYSCALL_BASE+311)
+#define __NR_semtimedop			(__NR_SYSCALL_BASE+312)
+#define __NR_vserver			(__NR_SYSCALL_BASE+313)
+#define __NR_ioprio_set			(__NR_SYSCALL_BASE+314)
+#define __NR_ioprio_get			(__NR_SYSCALL_BASE+315)
+#define __NR_inotify_init		(__NR_SYSCALL_BASE+316)
+#define __NR_inotify_add_watch		(__NR_SYSCALL_BASE+317)
+#define __NR_inotify_rm_watch		(__NR_SYSCALL_BASE+318)
+#define __NR_mbind			(__NR_SYSCALL_BASE+319)
+#define __NR_get_mempolicy		(__NR_SYSCALL_BASE+320)
+#define __NR_set_mempolicy		(__NR_SYSCALL_BASE+321)
+#define __NR_openat			(__NR_SYSCALL_BASE+322)
+#define __NR_mkdirat			(__NR_SYSCALL_BASE+323)
+#define __NR_mknodat			(__NR_SYSCALL_BASE+324)
+#define __NR_fchownat			(__NR_SYSCALL_BASE+325)
+#define __NR_futimesat			(__NR_SYSCALL_BASE+326)
+#define __NR_fstatat64			(__NR_SYSCALL_BASE+327)
+#define __NR_unlinkat			(__NR_SYSCALL_BASE+328)
+#define __NR_renameat			(__NR_SYSCALL_BASE+329)
+#define __NR_linkat			(__NR_SYSCALL_BASE+330)
+#define __NR_symlinkat			(__NR_SYSCALL_BASE+331)
+#define __NR_readlinkat			(__NR_SYSCALL_BASE+332)
+#define __NR_fchmodat			(__NR_SYSCALL_BASE+333)
+#define __NR_faccessat			(__NR_SYSCALL_BASE+334)
+					/* 335 for pselect6 */
+					/* 336 for ppoll */
+#define __NR_unshare			(__NR_SYSCALL_BASE+337)
+#define __NR_set_robust_list		(__NR_SYSCALL_BASE+338)
+#define __NR_get_robust_list		(__NR_SYSCALL_BASE+339)
+#define __NR_splice			(__NR_SYSCALL_BASE+340)
+#define __NR_arm_sync_file_range	(__NR_SYSCALL_BASE+341)
+#define __NR_sync_file_range2		__NR_arm_sync_file_range
+#define __NR_tee			(__NR_SYSCALL_BASE+342)
+#define __NR_vmsplice			(__NR_SYSCALL_BASE+343)
+#define __NR_move_pages			(__NR_SYSCALL_BASE+344)
+#define __NR_getcpu			(__NR_SYSCALL_BASE+345)
+					/* 346 for epoll_pwait */
+#define __NR_kexec_load			(__NR_SYSCALL_BASE+347)
+#define __NR_utimensat			(__NR_SYSCALL_BASE+348)
+#define __NR_signalfd			(__NR_SYSCALL_BASE+349)
+#define __NR_timerfd_create		(__NR_SYSCALL_BASE+350)
+#define __NR_eventfd			(__NR_SYSCALL_BASE+351)
+#define __NR_fallocate			(__NR_SYSCALL_BASE+352)
+#define __NR_timerfd_settime		(__NR_SYSCALL_BASE+353)
+#define __NR_timerfd_gettime		(__NR_SYSCALL_BASE+354)
+
+/*
+ * The following SWIs are ARM private.
+ */
+#define __ARM_NR_BASE			(__NR_SYSCALL_BASE+0x0f0000)
+#define __ARM_NR_breakpoint		(__ARM_NR_BASE+1)
+#define __ARM_NR_cacheflush		(__ARM_NR_BASE+2)
+#define __ARM_NR_usr26			(__ARM_NR_BASE+3)
+#define __ARM_NR_usr32			(__ARM_NR_BASE+4)
+#define __ARM_NR_set_tls		(__ARM_NR_BASE+5)
+
+/*
+ * The following syscalls are obsolete and no longer available for EABI.
+ */
+#if defined(__ARM_EABI__) && !defined(__KERNEL__)
+#undef __NR_time
+#undef __NR_umount
+#undef __NR_stime
+#undef __NR_alarm
+#undef __NR_utime
+#undef __NR_getrlimit
+#undef __NR_select
+#undef __NR_readdir
+#undef __NR_mmap
+#undef __NR_socketcall
+#undef __NR_syscall
+#undef __NR_ipc
+#endif
+
+#ifdef __KERNEL__
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_SYS_SOCKETCALL
+#endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+/*
+ * Unimplemented (or alternatively implemented) syscalls
+ */
+#define __IGNORE_fadvise64_64		1
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_ARM_UNISTD_H */
diff --git a/arch/arm/include/asm/user.h b/arch/arm/include/asm/user.h
new file mode 100644
index 000000000000..825c1e7c582d
--- /dev/null
+++ b/arch/arm/include/asm/user.h
@@ -0,0 +1,84 @@
+#ifndef _ARM_USER_H
+#define _ARM_USER_H
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user (under
+   linux we use the 'trad-core' bfd).  There are quite a number of
+   obstacles to being able to view the contents of the floating point
+   registers, and until these are solved you will not be able to view the
+   contents of them.  Actually, you can read in the core file and look at
+   the contents of the user struct to find out what the floating point
+   registers contain.
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+struct user_fp {
+	struct fp_reg {
+		unsigned int sign1:1;
+		unsigned int unused:15;
+		unsigned int sign2:1;
+		unsigned int exponent:14;
+		unsigned int j:1;
+		unsigned int mantissa1:31;
+		unsigned int mantissa0:32;
+	} fpregs[8];
+	unsigned int fpsr:32;
+	unsigned int fpcr:32;
+	unsigned char ftype[8];
+	unsigned int init_flag;
+};
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+struct user{
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+  struct pt_regs regs;		/* Where the registers are actually stored */
+/* ptrace does not yet supply these.  Someday.... */
+  int u_fpvalid;		/* True if math co-processor being used. */
+                                /* for this mess. Not yet used. */
+/* The rest of this junk is to help gdb figure out what goes where */
+  unsigned long int u_tsize;	/* Text segment size (pages). */
+  unsigned long int u_dsize;	/* Data segment size (pages). */
+  unsigned long int u_ssize;	/* Stack segment size (pages). */
+  unsigned long start_code;     /* Starting virtual address of text. */
+  unsigned long start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  long int signal;     		/* Signal that caused the core dump. */
+  int reserved;			/* No longer used */
+  unsigned long u_ar0;		/* Used by gdb to help find the values for */
+				/* the registers. */
+  unsigned long magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+  int u_debugreg[8];
+  struct user_fp u_fp;		/* FP state */
+  struct user_fp_struct * u_fp0;/* Used by gdb to help find the values for */
+  				/* the FP registers. */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ARM_USER_H */
diff --git a/arch/arm/include/asm/vfp.h b/arch/arm/include/asm/vfp.h
new file mode 100644
index 000000000000..f4ab34fd4f72
--- /dev/null
+++ b/arch/arm/include/asm/vfp.h
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/include/asm/vfp.h
+ *
+ * VFP register definitions.
+ * First, the standard VFP set.
+ */
+
+#define FPSID			cr0
+#define FPSCR			cr1
+#define MVFR1			cr6
+#define MVFR0			cr7
+#define FPEXC			cr8
+#define FPINST			cr9
+#define FPINST2			cr10
+
+/* FPSID bits */
+#define FPSID_IMPLEMENTER_BIT	(24)
+#define FPSID_IMPLEMENTER_MASK	(0xff << FPSID_IMPLEMENTER_BIT)
+#define FPSID_SOFTWARE		(1<<23)
+#define FPSID_FORMAT_BIT	(21)
+#define FPSID_FORMAT_MASK	(0x3  << FPSID_FORMAT_BIT)
+#define FPSID_NODOUBLE		(1<<20)
+#define FPSID_ARCH_BIT		(16)
+#define FPSID_ARCH_MASK		(0xF  << FPSID_ARCH_BIT)
+#define FPSID_PART_BIT		(8)
+#define FPSID_PART_MASK		(0xFF << FPSID_PART_BIT)
+#define FPSID_VARIANT_BIT	(4)
+#define FPSID_VARIANT_MASK	(0xF  << FPSID_VARIANT_BIT)
+#define FPSID_REV_BIT		(0)
+#define FPSID_REV_MASK		(0xF  << FPSID_REV_BIT)
+
+/* FPEXC bits */
+#define FPEXC_EX		(1 << 31)
+#define FPEXC_EN		(1 << 30)
+#define FPEXC_DEX		(1 << 29)
+#define FPEXC_FP2V		(1 << 28)
+#define FPEXC_VV		(1 << 27)
+#define FPEXC_TFV		(1 << 26)
+#define FPEXC_LENGTH_BIT	(8)
+#define FPEXC_LENGTH_MASK	(7 << FPEXC_LENGTH_BIT)
+#define FPEXC_IDF		(1 << 7)
+#define FPEXC_IXF		(1 << 4)
+#define FPEXC_UFF		(1 << 3)
+#define FPEXC_OFF		(1 << 2)
+#define FPEXC_DZF		(1 << 1)
+#define FPEXC_IOF		(1 << 0)
+#define FPEXC_TRAP_MASK		(FPEXC_IDF|FPEXC_IXF|FPEXC_UFF|FPEXC_OFF|FPEXC_DZF|FPEXC_IOF)
+
+/* FPSCR bits */
+#define FPSCR_DEFAULT_NAN	(1<<25)
+#define FPSCR_FLUSHTOZERO	(1<<24)
+#define FPSCR_ROUND_NEAREST	(0<<22)
+#define FPSCR_ROUND_PLUSINF	(1<<22)
+#define FPSCR_ROUND_MINUSINF	(2<<22)
+#define FPSCR_ROUND_TOZERO	(3<<22)
+#define FPSCR_RMODE_BIT		(22)
+#define FPSCR_RMODE_MASK	(3 << FPSCR_RMODE_BIT)
+#define FPSCR_STRIDE_BIT	(20)
+#define FPSCR_STRIDE_MASK	(3 << FPSCR_STRIDE_BIT)
+#define FPSCR_LENGTH_BIT	(16)
+#define FPSCR_LENGTH_MASK	(7 << FPSCR_LENGTH_BIT)
+#define FPSCR_IOE		(1<<8)
+#define FPSCR_DZE		(1<<9)
+#define FPSCR_OFE		(1<<10)
+#define FPSCR_UFE		(1<<11)
+#define FPSCR_IXE		(1<<12)
+#define FPSCR_IDE		(1<<15)
+#define FPSCR_IOC		(1<<0)
+#define FPSCR_DZC		(1<<1)
+#define FPSCR_OFC		(1<<2)
+#define FPSCR_UFC		(1<<3)
+#define FPSCR_IXC		(1<<4)
+#define FPSCR_IDC		(1<<7)
+
+/* MVFR0 bits */
+#define MVFR0_A_SIMD_BIT	(0)
+#define MVFR0_A_SIMD_MASK	(0xf << MVFR0_A_SIMD_BIT)
+
+/* Bit patterns for decoding the packaged operation descriptors */
+#define VFPOPDESC_LENGTH_BIT	(9)
+#define VFPOPDESC_LENGTH_MASK	(0x07 << VFPOPDESC_LENGTH_BIT)
+#define VFPOPDESC_UNUSED_BIT	(24)
+#define VFPOPDESC_UNUSED_MASK	(0xFF << VFPOPDESC_UNUSED_BIT)
+#define VFPOPDESC_OPDESC_MASK	(~(VFPOPDESC_LENGTH_MASK | VFPOPDESC_UNUSED_MASK))
diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h
new file mode 100644
index 000000000000..422f3cc204a2
--- /dev/null
+++ b/arch/arm/include/asm/vfpmacros.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/include/asm/vfpmacros.h
+ *
+ * Assembler-only file containing VFP macros and register definitions.
+ */
+#include "vfp.h"
+
+@ Macros to allow building with old toolkits (with no VFP support)
+	.macro	VFPFMRX, rd, sysreg, cond
+	MRC\cond	p10, 7, \rd, \sysreg, cr0, 0	@ FMRX	\rd, \sysreg
+	.endm
+
+	.macro	VFPFMXR, sysreg, rd, cond
+	MCR\cond	p10, 7, \rd, \sysreg, cr0, 0	@ FMXR	\sysreg, \rd
+	.endm
+
+	@ read all the working registers back into the VFP
+	.macro	VFPFLDMIA, base, tmp
+#if __LINUX_ARM_ARCH__ < 6
+	LDC	p11, cr0, [\base],#33*4		    @ FLDMIAX \base!, {d0-d15}
+#else
+	LDC	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d0-d15}
+#endif
+#ifdef CONFIG_VFPv3
+	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
+	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
+	cmp	\tmp, #2			    @ 32 x 64bit registers?
+	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	addne	\base, \base, #32*4		    @ step over unused register space
+#endif
+	.endm
+
+	@ write all the working registers out of the VFP
+	.macro	VFPFSTMIA, base, tmp
+#if __LINUX_ARM_ARCH__ < 6
+	STC	p11, cr0, [\base],#33*4		    @ FSTMIAX \base!, {d0-d15}
+#else
+	STC	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d0-d15}
+#endif
+#ifdef CONFIG_VFPv3
+	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
+	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
+	cmp	\tmp, #2			    @ 32 x 64bit registers?
+	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	addne	\base, \base, #32*4		    @ step over unused register space
+#endif
+	.endm
diff --git a/arch/arm/include/asm/vga.h b/arch/arm/include/asm/vga.h
new file mode 100644
index 000000000000..6a3cd2a2f670
--- /dev/null
+++ b/arch/arm/include/asm/vga.h
@@ -0,0 +1,12 @@
+#ifndef ASMARM_VGA_H
+#define ASMARM_VGA_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#define VGA_MAP_MEM(x,s)	(PCIMEM_BASE + (x))
+
+#define vga_readb(x)	(*((volatile unsigned char *)x))
+#define vga_writeb(x,y)	(*((volatile unsigned char *)y) = (x))
+
+#endif
diff --git a/arch/arm/include/asm/xor.h b/arch/arm/include/asm/xor.h
new file mode 100644
index 000000000000..7604673dc427
--- /dev/null
+++ b/arch/arm/include/asm/xor.h
@@ -0,0 +1,141 @@
+/*
+ *  arch/arm/include/asm/xor.h
+ *
+ *  Copyright (C) 2001 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm-generic/xor.h>
+
+#define __XOR(a1, a2) a1 ^= a2
+
+#define GET_BLOCK_2(dst) \
+	__asm__("ldmia	%0, {%1, %2}" \
+		: "=r" (dst), "=r" (a1), "=r" (a2) \
+		: "0" (dst))
+
+#define GET_BLOCK_4(dst) \
+	__asm__("ldmia	%0, {%1, %2, %3, %4}" \
+		: "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \
+		: "0" (dst))
+
+#define XOR_BLOCK_2(src) \
+	__asm__("ldmia	%0!, {%1, %2}" \
+		: "=r" (src), "=r" (b1), "=r" (b2) \
+		: "0" (src)); \
+	__XOR(a1, b1); __XOR(a2, b2);
+
+#define XOR_BLOCK_4(src) \
+	__asm__("ldmia	%0!, {%1, %2, %3, %4}" \
+		: "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \
+		: "0" (src)); \
+	__XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4)
+
+#define PUT_BLOCK_2(dst) \
+	__asm__ __volatile__("stmia	%0!, {%2, %3}" \
+		: "=r" (dst) \
+		: "0" (dst), "r" (a1), "r" (a2))
+
+#define PUT_BLOCK_4(dst) \
+	__asm__ __volatile__("stmia	%0!, {%2, %3, %4, %5}" \
+		: "=r" (dst) \
+		: "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4))
+
+static void
+xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 4;
+	register unsigned int a1 __asm__("r4");
+	register unsigned int a2 __asm__("r5");
+	register unsigned int a3 __asm__("r6");
+	register unsigned int a4 __asm__("r7");
+	register unsigned int b1 __asm__("r8");
+	register unsigned int b2 __asm__("r9");
+	register unsigned int b3 __asm__("ip");
+	register unsigned int b4 __asm__("lr");
+
+	do {
+		GET_BLOCK_4(p1);
+		XOR_BLOCK_4(p2);
+		PUT_BLOCK_4(p1);
+	} while (--lines);
+}
+
+static void
+xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 4;
+	register unsigned int a1 __asm__("r4");
+	register unsigned int a2 __asm__("r5");
+	register unsigned int a3 __asm__("r6");
+	register unsigned int a4 __asm__("r7");
+	register unsigned int b1 __asm__("r8");
+	register unsigned int b2 __asm__("r9");
+	register unsigned int b3 __asm__("ip");
+	register unsigned int b4 __asm__("lr");
+
+	do {
+		GET_BLOCK_4(p1);
+		XOR_BLOCK_4(p2);
+		XOR_BLOCK_4(p3);
+		PUT_BLOCK_4(p1);
+	} while (--lines);
+}
+
+static void
+xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3, unsigned long *p4)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 2;
+	register unsigned int a1 __asm__("r8");
+	register unsigned int a2 __asm__("r9");
+	register unsigned int b1 __asm__("ip");
+	register unsigned int b2 __asm__("lr");
+
+	do {
+		GET_BLOCK_2(p1);
+		XOR_BLOCK_2(p2);
+		XOR_BLOCK_2(p3);
+		XOR_BLOCK_2(p4);
+		PUT_BLOCK_2(p1);
+	} while (--lines);
+}
+
+static void
+xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+		unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	unsigned int lines = bytes / sizeof(unsigned long) / 2;
+	register unsigned int a1 __asm__("r8");
+	register unsigned int a2 __asm__("r9");
+	register unsigned int b1 __asm__("ip");
+	register unsigned int b2 __asm__("lr");
+
+	do {
+		GET_BLOCK_2(p1);
+		XOR_BLOCK_2(p2);
+		XOR_BLOCK_2(p3);
+		XOR_BLOCK_2(p4);
+		XOR_BLOCK_2(p5);
+		PUT_BLOCK_2(p1);
+	} while (--lines);
+}
+
+static struct xor_block_template xor_block_arm4regs = {
+	.name	= "arm4regs",
+	.do_2	= xor_arm4regs_2,
+	.do_3	= xor_arm4regs_3,
+	.do_4	= xor_arm4regs_4,
+	.do_5	= xor_arm4regs_5,
+};
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES			\
+	do {					\
+		xor_speed(&xor_block_arm4regs);	\
+		xor_speed(&xor_block_8regs);	\
+		xor_speed(&xor_block_32regs);	\
+	} while (0)
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index eb9092ca8008..1d296fc8494e 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_KPROBES)		+= kprobes.o kprobes-decode.o
 obj-$(CONFIG_ATAGS_PROC)	+= atags.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/crunch-bits.S b/arch/arm/kernel/crunch-bits.S
index a26886758c67..0ec9bb48fab9 100644
--- a/arch/arm/kernel/crunch-bits.S
+++ b/arch/arm/kernel/crunch-bits.S
@@ -16,7 +16,7 @@
 #include <asm/ptrace.h>
 #include <asm/thread_info.h>
 #include <asm/asm-offsets.h>
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 
 /*
  * We can't use hex constants here due to a bug in gas.
diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index 627d79414c9d..3b6a1c293ee4 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -15,7 +15,7 @@
 #include <linux/signal.h>
 #include <linux/sched.h>
 #include <linux/init.h>
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 #include <asm/thread_notify.h>
 #include <asm/io.h>
 
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index 5617566477b4..9550ff0ddde4 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -80,7 +80,7 @@
 #endif	/* CONFIG_CPU_V6 */
 
 #else
-#include <asm/arch/debug-macro.S>
+#include <mach/debug-macro.S>
 #endif	/* CONFIG_DEBUG_ICEDCC */
 
 /*
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 8bfd299bfe77..7a50575a8d4d 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -46,7 +46,7 @@
 
 #include <asm/dma.h>
 #include <asm/ecard.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mmu_context.h>
 #include <asm/mach/irq.h>
@@ -783,7 +783,7 @@ static void ecard_proc_init(void)
 
 #define ec_set_resource(ec,nr,st,sz)				\
 	do {							\
-		(ec)->resource[nr].name = ec->dev.bus_id;	\
+		(ec)->resource[nr].name = dev_name(&ec->dev);	\
 		(ec)->resource[nr].start = st;			\
 		(ec)->resource[nr].end = (st) + (sz) - 1;	\
 		(ec)->resource[nr].flags = IORESOURCE_MEM;	\
@@ -853,8 +853,7 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
 	for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
 		if (ec->resource[i].flags &&
 		    request_resource(&iomem_resource, &ec->resource[i])) {
-			printk(KERN_ERR "%s: resource(s) not available\n",
-				ec->dev.bus_id);
+			dev_err(&ec->dev, "resource(s) not available\n");
 			ec->resource[i].end -= ec->resource[i].start;
 			ec->resource[i].start = 0;
 			ec->resource[i].flags = 0;
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 7dca225752c1..617e509d60df 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -18,7 +18,7 @@
 #include <asm/memory.h>
 #include <asm/glue.h>
 #include <asm/vfpmacros.h>
-#include <asm/arch/entry-macro.S>
+#include <mach/entry-macro.S>
 #include <asm/thread_notify.h>
 
 #include "entry-header.S"
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 84694e88b428..060d7e2e9f64 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -10,7 +10,7 @@
 
 #include <asm/unistd.h>
 #include <asm/ftrace.h>
-#include <asm/arch/entry-macro.S>
+#include <mach/entry-macro.S>
 
 #include "entry-header.S"
 
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 7e9c00a8a412..1c3c6ea5f9e7 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -181,7 +181,7 @@ ENTRY(lookup_processor_type)
 	ldmfd	sp!, {r4 - r7, r9, pc}
 
 /*
- * Look in include/asm-arm/procinfo.h and arch/arm/kernel/arch.[ch] for
+ * Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
  * more information about the __proc_info and __arch_info structures.
  */
 	.long	__proc_info_begin
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index 5d78ffb8a9a7..27329bd32037 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -15,7 +15,6 @@
 #include <linux/init.h>
 
 #include <asm/assembler.h>
-#include <asm/mach-types.h>
 #include <asm/ptrace.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 11dcd52e51be..f88efb135b70 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -38,6 +38,7 @@
 #include <linux/proc_fs.h>
 
 #include <asm/system.h>
+#include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
 /*
diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c
new file mode 100644
index 000000000000..aaffaecffcd1
--- /dev/null
+++ b/arch/arm/kernel/kgdb.c
@@ -0,0 +1,201 @@
+/*
+ * arch/arm/kernel/kgdb.c
+ *
+ * ARM KGDB support
+ *
+ * Copyright (c) 2002-2004 MontaVista Software, Inc
+ * Copyright (c) 2008 Wind River Systems, Inc.
+ *
+ * Authors:  George Davis <davis_g@mvista.com>
+ *           Deepak Saxena <dsaxena@plexity.net>
+ */
+#include <linux/kgdb.h>
+#include <asm/traps.h>
+
+/* Make a local copy of the registers passed into the handler (bletch) */
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+	int regno;
+
+	/* Initialize all to zero. */
+	for (regno = 0; regno < GDB_MAX_REGS; regno++)
+		gdb_regs[regno] = 0;
+
+	gdb_regs[_R0]		= kernel_regs->ARM_r0;
+	gdb_regs[_R1]		= kernel_regs->ARM_r1;
+	gdb_regs[_R2]		= kernel_regs->ARM_r2;
+	gdb_regs[_R3]		= kernel_regs->ARM_r3;
+	gdb_regs[_R4]		= kernel_regs->ARM_r4;
+	gdb_regs[_R5]		= kernel_regs->ARM_r5;
+	gdb_regs[_R6]		= kernel_regs->ARM_r6;
+	gdb_regs[_R7]		= kernel_regs->ARM_r7;
+	gdb_regs[_R8]		= kernel_regs->ARM_r8;
+	gdb_regs[_R9]		= kernel_regs->ARM_r9;
+	gdb_regs[_R10]		= kernel_regs->ARM_r10;
+	gdb_regs[_FP]		= kernel_regs->ARM_fp;
+	gdb_regs[_IP]		= kernel_regs->ARM_ip;
+	gdb_regs[_SPT]		= kernel_regs->ARM_sp;
+	gdb_regs[_LR]		= kernel_regs->ARM_lr;
+	gdb_regs[_PC]		= kernel_regs->ARM_pc;
+	gdb_regs[_CPSR]		= kernel_regs->ARM_cpsr;
+}
+
+/* Copy local gdb registers back to kgdb regs, for later copy to kernel */
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *kernel_regs)
+{
+	kernel_regs->ARM_r0	= gdb_regs[_R0];
+	kernel_regs->ARM_r1	= gdb_regs[_R1];
+	kernel_regs->ARM_r2	= gdb_regs[_R2];
+	kernel_regs->ARM_r3	= gdb_regs[_R3];
+	kernel_regs->ARM_r4	= gdb_regs[_R4];
+	kernel_regs->ARM_r5	= gdb_regs[_R5];
+	kernel_regs->ARM_r6	= gdb_regs[_R6];
+	kernel_regs->ARM_r7	= gdb_regs[_R7];
+	kernel_regs->ARM_r8	= gdb_regs[_R8];
+	kernel_regs->ARM_r9	= gdb_regs[_R9];
+	kernel_regs->ARM_r10	= gdb_regs[_R10];
+	kernel_regs->ARM_fp	= gdb_regs[_FP];
+	kernel_regs->ARM_ip	= gdb_regs[_IP];
+	kernel_regs->ARM_sp	= gdb_regs[_SPT];
+	kernel_regs->ARM_lr	= gdb_regs[_LR];
+	kernel_regs->ARM_pc	= gdb_regs[_PC];
+	kernel_regs->ARM_cpsr	= gdb_regs[_CPSR];
+}
+
+void
+sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *task)
+{
+	struct pt_regs *thread_regs;
+	int regno;
+
+	/* Just making sure... */
+	if (task == NULL)
+		return;
+
+	/* Initialize to zero */
+	for (regno = 0; regno < GDB_MAX_REGS; regno++)
+		gdb_regs[regno] = 0;
+
+	/* Otherwise, we have only some registers from switch_to() */
+	thread_regs		= task_pt_regs(task);
+	gdb_regs[_R0]		= thread_regs->ARM_r0;
+	gdb_regs[_R1]		= thread_regs->ARM_r1;
+	gdb_regs[_R2]		= thread_regs->ARM_r2;
+	gdb_regs[_R3]		= thread_regs->ARM_r3;
+	gdb_regs[_R4]		= thread_regs->ARM_r4;
+	gdb_regs[_R5]		= thread_regs->ARM_r5;
+	gdb_regs[_R6]		= thread_regs->ARM_r6;
+	gdb_regs[_R7]		= thread_regs->ARM_r7;
+	gdb_regs[_R8]		= thread_regs->ARM_r8;
+	gdb_regs[_R9]		= thread_regs->ARM_r9;
+	gdb_regs[_R10]		= thread_regs->ARM_r10;
+	gdb_regs[_FP]		= thread_regs->ARM_fp;
+	gdb_regs[_IP]		= thread_regs->ARM_ip;
+	gdb_regs[_SPT]		= thread_regs->ARM_sp;
+	gdb_regs[_LR]		= thread_regs->ARM_lr;
+	gdb_regs[_PC]		= thread_regs->ARM_pc;
+	gdb_regs[_CPSR]		= thread_regs->ARM_cpsr;
+}
+
+static int compiled_break;
+
+int kgdb_arch_handle_exception(int exception_vector, int signo,
+			       int err_code, char *remcom_in_buffer,
+			       char *remcom_out_buffer,
+			       struct pt_regs *linux_regs)
+{
+	unsigned long addr;
+	char *ptr;
+
+	switch (remcom_in_buffer[0]) {
+	case 'D':
+	case 'k':
+	case 'c':
+		kgdb_contthread = NULL;
+
+		/*
+		 * Try to read optional parameter, pc unchanged if no parm.
+		 * If this was a compiled breakpoint, we need to move
+		 * to the next instruction or we will just breakpoint
+		 * over and over again.
+		 */
+		ptr = &remcom_in_buffer[1];
+		if (kgdb_hex2long(&ptr, &addr))
+			linux_regs->ARM_pc = addr;
+		else if (compiled_break == 1)
+			linux_regs->ARM_pc += 4;
+
+		compiled_break = 0;
+
+		return 0;
+	}
+
+	return -1;
+}
+
+static int kgdb_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+	kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+	return 0;
+}
+
+static int kgdb_compiled_brk_fn(struct pt_regs *regs, unsigned int instr)
+{
+	compiled_break = 1;
+	kgdb_handle_exception(1, SIGTRAP, 0, regs);
+
+	return 0;
+}
+
+static struct undef_hook kgdb_brkpt_hook = {
+	.instr_mask		= 0xffffffff,
+	.instr_val		= KGDB_BREAKINST,
+	.fn			= kgdb_brk_fn
+};
+
+static struct undef_hook kgdb_compiled_brkpt_hook = {
+	.instr_mask		= 0xffffffff,
+	.instr_val		= KGDB_COMPILED_BREAK,
+	.fn			= kgdb_compiled_brk_fn
+};
+
+/**
+ *	kgdb_arch_init - Perform any architecture specific initalization.
+ *
+ *	This function will handle the initalization of any architecture
+ *	specific callbacks.
+ */
+int kgdb_arch_init(void)
+{
+	register_undef_hook(&kgdb_brkpt_hook);
+	register_undef_hook(&kgdb_compiled_brkpt_hook);
+
+	return 0;
+}
+
+/**
+ *	kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ *	This function will handle the uninitalization of any architecture
+ *	specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+	unregister_undef_hook(&kgdb_brkpt_hook);
+	unregister_undef_hook(&kgdb_compiled_brkpt_hook);
+}
+
+/*
+ * Register our undef instruction hooks with ARM undef core.
+ * We regsiter a hook specifically looking for the KGB break inst
+ * and we handle the normal undef case within the do_undefinstr
+ * handler.
+ */
+struct kgdb_arch arch_kgdb_ops = {
+#ifndef __ARMEB__
+	.gdb_bpt_instr		= {0xfe, 0xde, 0xff, 0xe7}
+#else /* ! __ARMEB__ */
+	.gdb_bpt_instr		= {0xe7, 0xff, 0xde, 0xfe}
+#endif
+};
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index 5ee39e10c8d1..d28513f14d05 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -296,8 +296,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -337,7 +336,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	}
 
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
@@ -347,7 +346,6 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	return (void *)orig_ret_address;
 }
 
-/* Called with kretprobe_lock held. */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 79b7e5cf5416..a68259a0cccd 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -13,6 +13,7 @@
 #include <linux/module.h>
 #include <linux/moduleloader.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/elf.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 199b3680118b..3fd882337064 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -51,7 +51,7 @@ extern void setup_mm_for_reboot(char mode);
 
 static volatile int hlt_counter;
 
-#include <asm/arch/system.h>
+#include <mach/system.h>
 
 void disable_hlt(void)
 {
@@ -162,7 +162,7 @@ void cpu_idle(void)
 		if (!idle)
 			idle = default_idle;
 		leds_event(led_idle_start);
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			idle();
 		leds_event(led_idle_end);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index b7b0720bc1bb..38f0e7940a13 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -36,6 +36,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
+#include <asm/traps.h>
 
 #include "compat.h"
 #include "atags.h"
@@ -853,6 +854,7 @@ void __init setup_arch(char **cmdline_p)
 	conswitchp = &dummy_con;
 #endif
 #endif
+	early_trap_init();
 }
 
 
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index eefae1de334c..e9842f6767f9 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -68,20 +68,10 @@ enum ipi_msg_type {
 	IPI_TIMER,
 	IPI_RESCHEDULE,
 	IPI_CALL_FUNC,
+	IPI_CALL_FUNC_SINGLE,
 	IPI_CPU_STOP,
 };
 
-struct smp_call_struct {
-	void (*func)(void *info);
-	void *info;
-	int wait;
-	cpumask_t pending;
-	cpumask_t unfinished;
-};
-
-static struct smp_call_struct * volatile smp_call_function_data;
-static DEFINE_SPINLOCK(smp_call_function_lock);
-
 int __cpuinit __cpu_up(unsigned int cpu)
 {
 	struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu);
@@ -110,7 +100,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	 * a 1:1 mapping for the physical address of the kernel.
 	 */
 	pgd = pgd_alloc(&init_mm);
-	pmd = pmd_offset(pgd, PHYS_OFFSET);
+	pmd = pmd_offset(pgd + pgd_index(PHYS_OFFSET), PHYS_OFFSET);
 	*pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
 		     PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
 
@@ -149,7 +139,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	secondary_data.stack = NULL;
 	secondary_data.pgdir = 0;
 
-	*pmd_offset(pgd, PHYS_OFFSET) = __pmd(0);
+	*pmd = __pmd(0);
 	pgd_free(&init_mm, pgd);
 
 	if (ret) {
@@ -366,114 +356,15 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
 	local_irq_restore(flags);
 }
 
-/*
- * You must not call this function with disabled interrupts, from a
- * hardware interrupt handler, nor from a bottom half handler.
- */
-static int smp_call_function_on_cpu(void (*func)(void *info), void *info,
-				    int retry, int wait, cpumask_t callmap)
-{
-	struct smp_call_struct data;
-	unsigned long timeout;
-	int ret = 0;
-
-	data.func = func;
-	data.info = info;
-	data.wait = wait;
-
-	cpu_clear(smp_processor_id(), callmap);
-	if (cpus_empty(callmap))
-		goto out;
-
-	data.pending = callmap;
-	if (wait)
-		data.unfinished = callmap;
-
-	/*
-	 * try to get the mutex on smp_call_function_data
-	 */
-	spin_lock(&smp_call_function_lock);
-	smp_call_function_data = &data;
-
-	send_ipi_message(callmap, IPI_CALL_FUNC);
-
-	timeout = jiffies + HZ;
-	while (!cpus_empty(data.pending) && time_before(jiffies, timeout))
-		barrier();
-
-	/*
-	 * did we time out?
-	 */
-	if (!cpus_empty(data.pending)) {
-		/*
-		 * this may be causing our panic - report it
-		 */
-		printk(KERN_CRIT
-		       "CPU%u: smp_call_function timeout for %p(%p)\n"
-		       "      callmap %lx pending %lx, %swait\n",
-		       smp_processor_id(), func, info, *cpus_addr(callmap),
-		       *cpus_addr(data.pending), wait ? "" : "no ");
-
-		/*
-		 * TRACE
-		 */
-		timeout = jiffies + (5 * HZ);
-		while (!cpus_empty(data.pending) && time_before(jiffies, timeout))
-			barrier();
-
-		if (cpus_empty(data.pending))
-			printk(KERN_CRIT "     RESOLVED\n");
-		else
-			printk(KERN_CRIT "     STILL STUCK\n");
-	}
-
-	/*
-	 * whatever happened, we're done with the data, so release it
-	 */
-	smp_call_function_data = NULL;
-	spin_unlock(&smp_call_function_lock);
-
-	if (!cpus_empty(data.pending)) {
-		ret = -ETIMEDOUT;
-		goto out;
-	}
-
-	if (wait)
-		while (!cpus_empty(data.unfinished))
-			barrier();
- out:
-
-	return 0;
-}
-
-int smp_call_function(void (*func)(void *info), void *info, int retry,
-                      int wait)
+void arch_send_call_function_ipi(cpumask_t mask)
 {
-	return smp_call_function_on_cpu(func, info, retry, wait,
-					cpu_online_map);
+	send_ipi_message(mask, IPI_CALL_FUNC);
 }
-EXPORT_SYMBOL_GPL(smp_call_function);
 
-int smp_call_function_single(int cpu, void (*func)(void *info), void *info,
-			     int retry, int wait)
+void arch_send_call_function_single_ipi(int cpu)
 {
-	/* prevent preemption and reschedule on another processor */
-	int current_cpu = get_cpu();
-	int ret = 0;
-
-	if (cpu == current_cpu) {
-		local_irq_disable();
-		func(info);
-		local_irq_enable();
-	} else
-		ret = smp_call_function_on_cpu(func, info, retry, wait,
-					       cpumask_of_cpu(cpu));
-
-	put_cpu();
-
-	return ret;
+	send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
 }
-EXPORT_SYMBOL_GPL(smp_call_function_single);
 
 void show_ipi_list(struct seq_file *p)
 {
@@ -521,27 +412,6 @@ asmlinkage void __exception do_local_timer(struct pt_regs *regs)
 }
 #endif
 
-/*
- * ipi_call_function - handle IPI from smp_call_function()
- *
- * Note that we copy data out of the cross-call structure and then
- * let the caller know that we're here and have done with their data
- */
-static void ipi_call_function(unsigned int cpu)
-{
-	struct smp_call_struct *data = smp_call_function_data;
-	void (*func)(void *info) = data->func;
-	void *info = data->info;
-	int wait = data->wait;
-
-	cpu_clear(cpu, data->pending);
-
-	func(info);
-
-	if (wait)
-		cpu_clear(cpu, data->unfinished);
-}
-
 static DEFINE_SPINLOCK(stop_lock);
 
 /*
@@ -611,7 +481,11 @@ asmlinkage void __exception do_IPI(struct pt_regs *regs)
 				break;
 
 			case IPI_CALL_FUNC:
-				ipi_call_function(cpu);
+				generic_smp_call_function_interrupt();
+				break;
+
+			case IPI_CALL_FUNC_SINGLE:
+				generic_smp_call_function_single_interrupt();
 				break;
 
 			case IPI_CPU_STOP:
@@ -662,14 +536,13 @@ int setup_profiling_timer(unsigned int multiplier)
 }
 
 static int
-on_each_cpu_mask(void (*func)(void *), void *info, int retry, int wait,
-		 cpumask_t mask)
+on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask)
 {
 	int ret = 0;
 
 	preempt_disable();
 
-	ret = smp_call_function_on_cpu(func, info, retry, wait, mask);
+	ret = smp_call_function_mask(mask, func, info, wait);
 	if (cpu_isset(smp_processor_id(), mask))
 		func(info);
 
@@ -731,14 +604,14 @@ static inline void ipi_flush_tlb_kernel_range(void *arg)
 
 void flush_tlb_all(void)
 {
-	on_each_cpu(ipi_flush_tlb_all, NULL, 1, 1);
+	on_each_cpu(ipi_flush_tlb_all, NULL, 1);
 }
 
 void flush_tlb_mm(struct mm_struct *mm)
 {
 	cpumask_t mask = mm->cpu_vm_mask;
 
-	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask);
 }
 
 void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
@@ -749,7 +622,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 	ta.ta_vma = vma;
 	ta.ta_start = uaddr;
 
-	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask);
 }
 
 void flush_tlb_kernel_page(unsigned long kaddr)
@@ -758,7 +631,7 @@ void flush_tlb_kernel_page(unsigned long kaddr)
 
 	ta.ta_start = kaddr;
 
-	on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1, 1);
+	on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
 }
 
 void flush_tlb_range(struct vm_area_struct *vma,
@@ -771,7 +644,7 @@ void flush_tlb_range(struct vm_area_struct *vma,
 	ta.ta_start = start;
 	ta.ta_end = end;
 
-	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, 1, mask);
+	on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
@@ -781,5 +654,5 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 	ta.ta_start = start;
 	ta.ta_end = end;
 
-	on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1, 1);
+	on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
 }
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index cc5145b28e7f..368d171754cf 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -130,7 +130,9 @@ static const struct leds_evt_name evt_names[] = {
 	{ "red",   led_red_on,   led_red_off   },
 };
 
-static ssize_t leds_store(struct sys_device *dev, const char *buf, size_t size)
+static ssize_t leds_store(struct sys_device *dev,
+			struct sysdev_attribute *attr,
+			const char *buf, size_t size)
 {
 	int ret = -EINVAL, len = strcspn(buf, " ");
 
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 5595fdd75e82..7277aef83098 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -708,6 +708,11 @@ EXPORT_SYMBOL(abort);
 
 void __init trap_init(void)
 {
+	return;
+}
+
+void __init early_trap_init(void)
+{
 	unsigned long vectors = CONFIG_VECTORS_BASE;
 	extern char __stubs_start[], __stubs_end[];
 	extern char __vectors_start[], __vectors_end[];
diff --git a/arch/arm/lib/ecard.S b/arch/arm/lib/ecard.S
index c55aaa2a2088..8678eb2b7a60 100644
--- a/arch/arm/lib/ecard.S
+++ b/arch/arm/lib/ecard.S
@@ -12,7 +12,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define CPSR2SPSR(rt) \
 		mrs	rt, cpsr; \
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 1dd8ea4f9a9c..2034d4dbe6ad 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -20,7 +20,7 @@
  *		r2, r3 contains the zero-extended value
  *		lr corrupted
  *
- * No other registers must be altered.  (see include/asm-arm/uaccess.h
+ * No other registers must be altered.  (see <asm/uaccess.h>
  * for specific ASM register usage).
  *
  * Note that ADDR_LIMIT is either 0 or 0xc0000000.
diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S
index 4ef904185142..9aaf7c72065d 100644
--- a/arch/arm/lib/io-readsw-armv3.S
+++ b/arch/arm/lib/io-readsw-armv3.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 .Linsw_bad_alignment:
 		adr	r0, .Linsw_bad_align_msg
diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S
index 1607a29f49b7..cd34503e424d 100644
--- a/arch/arm/lib/io-writesw-armv3.S
+++ b/arch/arm/lib/io-writesw-armv3.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 .Loutsw_bad_alignment:
 		adr	r0, .Loutsw_bad_align_msg
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index 8620afe54f72..08ec7dffa52e 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -20,7 +20,7 @@
  * Outputs:	r0 is the error code
  *		lr corrupted
  *
- * No other registers must be altered.  (see include/asm-arm/uaccess.h
+ * No other registers must be altered.  (see <asm/uaccess.h>
  * for specific ASM register usage).
  *
  * Note that ADDR_LIMIT is either 0 or 0xc0000000
diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
index 83f57da3184c..81a3ecc0d104 100644
--- a/arch/arm/mach-aaec2000/aaed2000.c
+++ b/arch/arm/mach-aaec2000/aaed2000.c
@@ -20,14 +20,14 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/aaed2000.h>
+#include <mach/aaed2000.h>
 
 #include "core.h"
 
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index b016be2b0e35..dfb26bc23d1a 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -20,7 +20,7 @@
 #include <linux/timex.h>
 #include <linux/signal.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
diff --git a/arch/arm/mach-aaec2000/include/mach/aaec2000.h b/arch/arm/mach-aaec2000/include/mach/aaec2000.h
new file mode 100644
index 000000000000..bc729c42f843
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/aaec2000.h
@@ -0,0 +1,207 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/aaec2000.h
+ *
+ *  AAEC-2000 registers definition
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAEC2000_H
+#define __ASM_ARCH_AAEC2000_H
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not this file
+#endif /* __ASM_ARCH_HARDWARE_H */
+
+/* Chip selects */
+#define AAEC_CS0	0x00000000
+#define AAEC_CS1	0x10000000
+#define AAEC_CS2	0x20000000
+#define AAEC_CS3	0x30000000
+
+/* Flash */
+#define AAEC_FLASH_BASE	AAEC_CS0
+#define AAEC_FLASH_SIZE	SZ_64M
+
+/* Interrupt controller */
+#define IRQ_BASE	__REG(0x80000500)
+#define IRQ_INTSR	__REG(0x80000500)	/* Int Status Register */
+#define IRQ_INTRSR	__REG(0x80000504)	/* Int Raw (unmasked) Status */
+#define IRQ_INTENS	__REG(0x80000508)	/* Int Enable Set */
+#define IRQ_INTENC	__REG(0x8000050c)	/* Int Enable Clear */
+
+/* UART 1 */
+#define UART1_BASE	__REG(0x80000600)
+#define UART1_DR	__REG(0x80000600) /* Data/FIFO Register */
+#define UART1_LCR	__REG(0x80000604) /* Link Control Register */
+#define UART1_BRCR	__REG(0x80000608) /* Baud Rate Control Register */
+#define UART1_CR	__REG(0x8000060c) /* Control Register */
+#define UART1_SR	__REG(0x80000610) /* Status Register */
+#define UART1_INT	__REG(0x80000614) /* Interrupt Status Register */
+#define UART1_INTM	__REG(0x80000618) /* Interrupt Mask Register */
+#define UART1_INTRES	__REG(0x8000061c) /* Int Result (masked status) Register */
+
+/* UART 2 */
+#define UART2_BASE	__REG(0x80000700)
+#define UART2_DR	__REG(0x80000700) /* Data/FIFO Register */
+#define UART2_LCR	__REG(0x80000704) /* Link Control Register */
+#define UART2_BRCR	__REG(0x80000708) /* Baud Rate Control Register */
+#define UART2_CR	__REG(0x8000070c) /* Control Register */
+#define UART2_SR	__REG(0x80000710) /* Status Register */
+#define UART2_INT	__REG(0x80000714) /* Interrupt Status Register */
+#define UART2_INTM	__REG(0x80000718) /* Interrupt Mask Register */
+#define UART2_INTRES	__REG(0x8000071c) /* Int Result (masked status) Register */
+
+/* UART 3 */
+#define UART3_BASE	__REG(0x80000800)
+#define UART3_DR	__REG(0x80000800) /* Data/FIFO Register */
+#define UART3_LCR	__REG(0x80000804) /* Link Control Register */
+#define UART3_BRCR	__REG(0x80000808) /* Baud Rate Control Register */
+#define UART3_CR	__REG(0x8000080c) /* Control Register */
+#define UART3_SR	__REG(0x80000810) /* Status Register */
+#define UART3_INT	__REG(0x80000814) /* Interrupt Status Register */
+#define UART3_INTM	__REG(0x80000818) /* Interrupt Mask Register */
+#define UART3_INTRES	__REG(0x8000081c) /* Int Result (masked status) Register */
+
+/* These are used in some places */
+#define _UART1_BASE __PREG(UART1_BASE)
+#define _UART2_BASE __PREG(UART2_BASE)
+#define _UART3_BASE __PREG(UART3_BASE)
+
+/* UART Registers Offsets */
+#define UART_DR		0x00
+#define UART_LCR	0x04
+#define UART_BRCR	0x08
+#define UART_CR		0x0c
+#define UART_SR		0x10
+#define UART_INT	0x14
+#define UART_INTM	0x18
+#define UART_INTRES	0x1c
+
+/* UART_LCR Bitmask */
+#define UART_LCR_BRK	(1 << 0) /* Send Break */
+#define UART_LCR_PEN	(1 << 1) /* Parity Enable */
+#define UART_LCR_EP	(1 << 2) /* Even/Odd Parity */
+#define UART_LCR_S2	(1 << 3) /* One/Two Stop bits */
+#define UART_LCR_FIFO	(1 << 4) /* FIFO Enable */
+#define UART_LCR_WL5	(0 << 5) /* Word Length - 5 bits */
+#define UART_LCR_WL6	(1 << 5) /* Word Length - 6 bits */
+#define UART_LCR_WL7	(1 << 6) /* Word Length - 7 bits */
+#define UART_LCR_WL8	(1 << 7) /* Word Length - 8 bits */
+
+/* UART_CR Bitmask */
+#define UART_CR_EN	(1 << 0) /* UART Enable */
+#define UART_CR_SIR	(1 << 1) /* IrDA SIR Enable */
+#define UART_CR_SIRLP	(1 << 2) /* Low Power IrDA Enable */
+#define UART_CR_RXP	(1 << 3) /* Receive Pin Polarity */
+#define UART_CR_TXP	(1 << 4) /* Transmit Pin Polarity */
+#define UART_CR_MXP	(1 << 5) /* Modem Pin Polarity */
+#define UART_CR_LOOP	(1 << 6) /* Loopback Mode */
+
+/* UART_SR Bitmask */
+#define UART_SR_CTS	(1 << 0) /* Clear To Send Status */
+#define UART_SR_DSR	(1 << 1) /* Data Set Ready Status */
+#define UART_SR_DCD	(1 << 2) /* Data Carrier Detect Status */
+#define UART_SR_TxBSY	(1 << 3) /* Transmitter Busy Status */
+#define UART_SR_RxFE	(1 << 4) /* Receive FIFO Empty Status */
+#define UART_SR_TxFF	(1 << 5) /* Transmit FIFO Full Status */
+#define UART_SR_RxFF	(1 << 6) /* Receive FIFO Full Status */
+#define UART_SR_TxFE	(1 << 7) /* Transmit FIFO Empty Status */
+
+/* UART_INT Bitmask */
+#define UART_INT_RIS	(1 << 0) /* Rx Interrupt */
+#define UART_INT_TIS	(1 << 1) /* Tx Interrupt */
+#define UART_INT_MIS	(1 << 2) /* Modem Interrupt */
+#define UART_INT_RTIS	(1 << 3) /* Receive Timeout Interrupt */
+
+/* Timer 1 */
+#define TIMER1_BASE	__REG(0x80000c00)
+#define TIMER1_LOAD	__REG(0x80000c00)	/* Timer 1 Load Register */
+#define TIMER1_VAL	__REG(0x80000c04)	/* Timer 1 Value Register */
+#define TIMER1_CTRL	__REG(0x80000c08)	/* Timer 1 Control Register */
+#define TIMER1_CLEAR	__REG(0x80000c0c)	/* Timer 1 Clear Register */
+
+/* Timer 2 */
+#define TIMER2_BASE	__REG(0x80000d00)
+#define TIMER2_LOAD	__REG(0x80000d00)	/* Timer 2 Load Register */
+#define TIMER2_VAL	__REG(0x80000d04)	/* Timer 2 Value Register */
+#define TIMER2_CTRL	__REG(0x80000d08)	/* Timer 2 Control Register */
+#define TIMER2_CLEAR	__REG(0x80000d0c)	/* Timer 2 Clear Register */
+
+/* Timer 3 */
+#define TIMER3_BASE	__REG(0x80000e00)
+#define TIMER3_LOAD	__REG(0x80000e00)	/* Timer 3 Load Register */
+#define TIMER3_VAL	__REG(0x80000e04)	/* Timer 3 Value Register */
+#define TIMER3_CTRL	__REG(0x80000e08)	/* Timer 3 Control Register */
+#define TIMER3_CLEAR	__REG(0x80000e0c)	/* Timer 3 Clear Register */
+
+/* Timer Control register bits */
+#define TIMER_CTRL_ENABLE	(1 << 7) /* Enable (Start Timer) */
+#define TIMER_CTRL_PERIODIC	(1 << 6) /* Periodic Running Mode */
+#define TIMER_CTRL_FREE_RUNNING (0 << 6) /* Normal Running Mode */
+#define TIMER_CTRL_CLKSEL_508K	(1 << 3) /* 508KHz Clock select (Timer 1, 2) */
+#define TIMER_CTRL_CLKSEL_2K	(0 << 3) /* 2KHz Clock Select (Timer 1, 2) */
+
+/* Power and State Control */
+#define POWER_BASE	__REG(0x80000400)
+#define POWER_PWRSR	__REG(0x80000400) /* Power Status Register */
+#define POWER_PWRCNT	__REG(0x80000404) /* Power/Clock control */
+#define POWER_HALT	__REG(0x80000408) /* Power Idle Mode */
+#define POWER_STDBY	__REG(0x8000040c) /* Power Standby Mode */
+#define POWER_BLEOI	__REG(0x80000410) /* Battery Low End of Interrupt */
+#define POWER_MCEOI	__REG(0x80000414) /* Media Changed EoI */
+#define POWER_TEOI	__REG(0x80000418) /* Tick EoI */
+#define POWER_STFCLR	__REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
+#define POWER_CLKSET	__REG(0x80000420) /* Clock Speed Control */
+
+/* GPIO Registers */
+#define AAEC_GPIO_PHYS	0x80000e00
+
+#define AAEC_GPIO_PADR		__REG(AAEC_GPIO_PHYS + 0x00)
+#define AAEC_GPIO_PBDR		__REG(AAEC_GPIO_PHYS + 0x04)
+#define AAEC_GPIO_PCDR		__REG(AAEC_GPIO_PHYS + 0x08)
+#define AAEC_GPIO_PDDR		__REG(AAEC_GPIO_PHYS + 0x0c)
+#define AAEC_GPIO_PADDR		__REG(AAEC_GPIO_PHYS + 0x10)
+#define AAEC_GPIO_PBDDR		__REG(AAEC_GPIO_PHYS + 0x14)
+#define AAEC_GPIO_PCDDR		__REG(AAEC_GPIO_PHYS + 0x18)
+#define AAEC_GPIO_PDDDR		__REG(AAEC_GPIO_PHYS + 0x1c)
+#define AAEC_GPIO_PEDR		__REG(AAEC_GPIO_PHYS + 0x20)
+#define AAEC_GPIO_PEDDR		__REG(AAEC_GPIO_PHYS + 0x24)
+#define AAEC_GPIO_KSCAN		__REG(AAEC_GPIO_PHYS + 0x28)
+#define AAEC_GPIO_PINMUX	__REG(AAEC_GPIO_PHYS + 0x2c)
+#define AAEC_GPIO_PFDR		__REG(AAEC_GPIO_PHYS + 0x30)
+#define AAEC_GPIO_PFDDR		__REG(AAEC_GPIO_PHYS + 0x34)
+#define AAEC_GPIO_PGDR		__REG(AAEC_GPIO_PHYS + 0x38)
+#define AAEC_GPIO_PGDDR		__REG(AAEC_GPIO_PHYS + 0x3c)
+#define AAEC_GPIO_PHDR		__REG(AAEC_GPIO_PHYS + 0x40)
+#define AAEC_GPIO_PHDDR		__REG(AAEC_GPIO_PHYS + 0x44)
+#define AAEC_GPIO_RAZ		__REG(AAEC_GPIO_PHYS + 0x48)
+#define AAEC_GPIO_INTTYPE1	__REG(AAEC_GPIO_PHYS + 0x4c)
+#define AAEC_GPIO_INTTYPE2	__REG(AAEC_GPIO_PHYS + 0x50)
+#define AAEC_GPIO_FEOI		__REG(AAEC_GPIO_PHYS + 0x54)
+#define AAEC_GPIO_INTEN		__REG(AAEC_GPIO_PHYS + 0x58)
+#define AAEC_GPIO_INTSTATUS	__REG(AAEC_GPIO_PHYS + 0x5c)
+#define AAEC_GPIO_RAWINTSTATUS	__REG(AAEC_GPIO_PHYS + 0x60)
+#define AAEC_GPIO_DB		__REG(AAEC_GPIO_PHYS + 0x64)
+#define AAEC_GPIO_PAPINDR	__REG(AAEC_GPIO_PHYS + 0x68)
+#define AAEC_GPIO_PBPINDR	__REG(AAEC_GPIO_PHYS + 0x6c)
+#define AAEC_GPIO_PCPINDR	__REG(AAEC_GPIO_PHYS + 0x70)
+#define AAEC_GPIO_PDPINDR	__REG(AAEC_GPIO_PHYS + 0x74)
+#define AAEC_GPIO_PEPINDR	__REG(AAEC_GPIO_PHYS + 0x78)
+#define AAEC_GPIO_PFPINDR	__REG(AAEC_GPIO_PHYS + 0x7c)
+#define AAEC_GPIO_PGPINDR	__REG(AAEC_GPIO_PHYS + 0x80)
+#define AAEC_GPIO_PHPINDR	__REG(AAEC_GPIO_PHYS + 0x84)
+
+#define AAEC_GPIO_PINMUX_PE0CON		(1 << 0)
+#define AAEC_GPIO_PINMUX_PD0CON		(1 << 1)
+#define AAEC_GPIO_PINMUX_CODECON	(1 << 2)
+#define AAEC_GPIO_PINMUX_UART3CON	(1 << 3)
+
+/* LCD Controller */
+#define AAEC_CLCD_PHYS	0x80003000
+
+#endif /* __ARM_ARCH_AAEC2000_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/aaed2000.h b/arch/arm/mach-aaec2000/include/mach/aaed2000.h
new file mode 100644
index 000000000000..f821295ca71b
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/aaed2000.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/aaed2000.h
+ *
+ *  AAED-2000 specific bits definition
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAED2000_H
+#define __ASM_ARCH_AAED2000_H
+
+/* External GPIOs. */
+
+#define EXT_GPIO_PBASE	AAEC_CS3
+#define EXT_GPIO_VBASE	0xf8100000
+#define EXT_GPIO_LENGTH	0x00001000
+
+#define __ext_gpio_p2v(x)	((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE)
+#define __ext_gpio_v2p(x)	((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE)
+
+#define __EXT_GPIO_REG(x)	(*((volatile u32 *)__ext_gpio_p2v(x)))
+#define __EXT_GPIO_PREG(x)	(__ext_gpio_v2p((u32)&(x)))
+
+#define AAED_EXT_GPIO	__EXT_GPIO_REG(EXT_GPIO_PBASE)
+
+#define AAED_EGPIO_KBD_SCAN	0x00003fff /* Keyboard scan data */
+#define AAED_EGPIO_PWR_INT	0x00008fff /* Smart battery charger interrupt */
+#define AAED_EGPIO_SWITCHED	0x000f0000 /* DIP Switches */
+#define AAED_EGPIO_USB_VBUS	0x00400000 /* USB Vbus sense */
+#define AAED_EGPIO_LCD_PWR_EN	0x02000000 /* LCD and backlight PWR enable */
+#define AAED_EGPIO_nLED0	0x20000000 /* LED 0 */
+#define AAED_EGPIO_nLED1	0x20000000 /* LED 1 */
+#define AAED_EGPIO_nLED2	0x20000000 /* LED 2 */
+
+
+#endif /* __ARM_ARCH_AAED2000_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/debug-macro.S b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
new file mode 100644
index 000000000000..0b6351d7c389
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/debug-macro.S
@@ -0,0 +1,37 @@
+/*  arch/arm/mach-aaec2000/include/mach/debug-macro.S
+ *
+ *  Debugging macro include header
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include "hardware.h"
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x80000000		@ physical
+		movne	\rx, #io_p2v(0x80000000)	@ virtual
+		orr	\rx, \rx, #0x00000800
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x10]
+		tst	\rd, #(1 << 7)
+		beq	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+#if 0
+1001:		ldr	\rd, [\rx, #0x10]
+		tst	\rd, #(1 << 5)
+		beq	1001b
+#endif
+		.endm
diff --git a/arch/arm/mach-aaec2000/include/mach/dma.h b/arch/arm/mach-aaec2000/include/mach/dma.h
new file mode 100644
index 000000000000..2da846c72fe7
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/dma.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-aaec2000/include/mach/entry-macro.S b/arch/arm/mach-aaec2000/include/mach/entry-macro.S
new file mode 100644
index 000000000000..c8fb34469007
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/entry-macro.S
+ *
+ *  Low-level IRQ helper for aaec-2000 based platforms
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#include <mach/irqs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	r4, #0xf8000000
+		add	r4, r4, #0x00000500
+		mov	\base, r4
+		ldr	\irqstat, [\base, #0]
+		cmp	\irqstat, #0
+		bne	1001f
+		ldr	\irqnr, =NR_IRQS+1
+		b       1003f
+1001:		mov	\irqnr, #0
+1002:		ands	\tmp, \irqstat, #1
+		mov	\irqstat, \irqstat, LSR #1
+		add	\irqnr, \irqnr, #1
+		beq	1002b
+		sub	\irqnr, \irqnr, #1
+1003:
+		.endm
diff --git a/arch/arm/mach-aaec2000/include/mach/hardware.h b/arch/arm/mach-aaec2000/include/mach/hardware.h
new file mode 100644
index 000000000000..965a6f6672d6
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/hardware.h
@@ -0,0 +1,50 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/hardware.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/aaec2000.h>
+
+/* The kernel is loaded at physical address 0xf8000000.
+ * We map the IO space a bit after
+ */
+#define PIO_APB_BASE	0x80000000
+#define VIO_APB_BASE	0xf8000000
+#define IO_APB_LENGTH	0x2000
+#define PIO_AHB_BASE	0x80002000
+#define VIO_AHB_BASE	0xf8002000
+#define IO_AHB_LENGTH	0x2000
+
+#define VIO_BASE    VIO_APB_BASE
+#define PIO_BASE    PIO_APB_BASE
+
+#define io_p2v(x) ( (x) - PIO_BASE + VIO_BASE )
+#define io_v2p(x) ( (x) + PIO_BASE - VIO_BASE )
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+/* FIXME: Is it needed to optimize this a la pxa ?? */
+#define __REG(x)    (*((volatile u32 *)io_p2v(x)))
+#define __PREG(x)   (io_v2p((u32)&(x)))
+
+#else /* __ASSEMBLY__ */
+
+#define __REG(x)    io_p2v(x)
+#define __PREG(x)   io_v2p(x)
+
+#endif
+
+#include "aaec2000.h"
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/io.h b/arch/arm/mach-aaec2000/include/mach/io.h
new file mode 100644
index 000000000000..c87c24de1110
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/io.h
+ *
+ *  Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-aaec2000/include/mach/irqs.h b/arch/arm/mach-aaec2000/include/mach/irqs.h
new file mode 100644
index 000000000000..bf45c6d2f294
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/irqs.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/irqs.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define INT_GPIOF0_FIQ	0  /* External GPIO Port F O Fast Interrupt Input */
+#define INT_BL_FIQ	1  /* Battery Low Fast Interrupt */
+#define INT_WE_FIQ	2  /* Watchdog Expired Fast Interrupt */
+#define INT_MV_FIQ	3  /* Media Changed Interrupt */
+#define INT_SC		4  /* Sound Codec Interrupt */
+#define INT_GPIO1	5  /* GPIO Port F Configurable Int 1 */
+#define INT_GPIO2	6  /* GPIO Port F Configurable Int 2 */
+#define INT_GPIO3	7  /* GPIO Port F Configurable Int 3 */
+#define INT_TMR1_OFL	8  /* Timer 1 Overflow Interrupt */
+#define INT_TMR2_OFL	9  /* Timer 2 Overflow Interrupt */
+#define INT_RTC_CM	10 /* RTC Compare Match Interrupt */
+#define INT_TICK	11 /* 64Hz Tick Interrupt */
+#define INT_UART1	12 /* UART1 Interrupt */
+#define INT_UART2	13 /* UART2 & Modem State Changed Interrupt */
+#define INT_LCD		14 /* LCD Interrupt */
+#define INT_SSI		15 /* SSI End of Transfer Interrupt */
+#define INT_UART3	16 /* UART3 Interrupt */
+#define INT_SCI		17 /* SCI Interrupt */
+#define INT_AAC		18 /* Advanced Audio Codec Interrupt */
+#define INT_MMC		19 /* MMC Interrupt */
+#define INT_USB		20 /* USB Interrupt */
+#define INT_DMA		21 /* DMA Interrupt */
+#define INT_TMR3_UOFL	22 /* Timer 3 Underflow Interrupt */
+#define INT_GPIO4	23 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO5	24 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO6	25 /* GPIO Port F Configurable Int 4 */
+#define INT_GPIO7	26 /* GPIO Port F Configurable Int 4 */
+#define INT_BMI		27 /* BMI Interrupt */
+
+#define NR_IRQS		(INT_BMI + 1)
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h
new file mode 100644
index 000000000000..56ae900a482e
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/memory.h
@@ -0,0 +1,30 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/memory.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+#define PHYS_OFFSET	UL(0xf0000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+/*
+ * The nodes are the followings:
+ *
+ *   node 0: 0xf000.0000 - 0xf3ff.ffff
+ *   node 1: 0xf400.0000 - 0xf7ff.ffff
+ *   node 2: 0xf800.0000 - 0xfbff.ffff
+ *   node 3: 0xfc00.0000 - 0xffff.ffff
+ */
+#define NODE_MEM_SIZE_BITS	26
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/system.h b/arch/arm/mach-aaec2000/include/mach/system.h
new file mode 100644
index 000000000000..8f4115d734ce
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/system.h
@@ -0,0 +1,24 @@
+/*
+ *  arch/arm/mach-aaed2000/include/mach/system.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/timex.h b/arch/arm/mach-aaec2000/include/mach/timex.h
new file mode 100644
index 000000000000..6c8edf4a8828
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/timex.h
@@ -0,0 +1,18 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/timex.h
+ *
+ *  AAEC-2000 Architecture timex specification
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE		508000
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/uncompress.h b/arch/arm/mach-aaec2000/include/mach/uncompress.h
new file mode 100644
index 000000000000..381ecad1a1bb
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/uncompress.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include "hardware.h"
+
+#define UART(x)         (*(volatile unsigned long *)(serial_port + (x)))
+
+static void putc(int c)
+{
+	unsigned long serial_port;
+        do {
+		serial_port = _UART3_BASE;
+		if (UART(UART_CR) & UART_CR_EN) break;
+		serial_port = _UART1_BASE;
+		if (UART(UART_CR) & UART_CR_EN) break;
+		serial_port = _UART2_BASE;
+		if (UART(UART_CR) & UART_CR_EN) break;
+		return;
+	} while (0);
+
+	/* wait for space in the UART's transmitter */
+	while ((UART(UART_SR) & UART_SR_TxFF))
+		barrier();
+
+	/* send the character out. */
+	UART(UART_DR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
new file mode 100644
index 000000000000..551f68f666bf
--- /dev/null
+++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h
@@ -0,0 +1,16 @@
+/*
+ *  arch/arm/mach-aaec2000/include/mach/vmalloc.h
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END		(PAGE_OFFSET + 0x10000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 5bad6b9b00d7..a048b92cb407 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -297,7 +297,7 @@ config MTD_AT91_DATAFLASH_CARD
 	help
 	  Enable support for the DataFlash card.
 
-config MTD_NAND_AT91_BUSWIDTH_16
+config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
 	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
 	help
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index 933fa8f55cbc..638948c16770 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -17,10 +17,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91cap9.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 747b9dedab88..abb4aac8fa98 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -20,11 +20,11 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91cap9.h>
+#include <mach/at91cap9_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -376,8 +376,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -395,7 +395,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91cap9_nand_device = {
-	.name		= "at91_nand",
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -404,7 +404,7 @@ static struct platform_device at91cap9_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa, mode;
 
@@ -445,7 +445,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	platform_device_register(&at91cap9_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index d688c1dbd925..28594fcc88e3 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -14,9 +14,9 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_st.h>
+#include <mach/at91rm9200.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_st.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index de19bee83f75..9338825cfcd7 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -17,10 +17,10 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
@@ -368,8 +368,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -382,7 +382,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91rm9200_nand_device = {
-	.name		= "at91_nand",
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -391,7 +391,7 @@ static struct platform_device at91rm9200_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned int csa;
 
@@ -429,7 +429,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	platform_device_register(&at91rm9200_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index 50392ff71513..a72e798a2a40 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -26,7 +26,7 @@
 
 #include <asm/mach/time.h>
 
-#include <asm/arch/at91_st.h>
+#include <mach/at91_st.h>
 
 static unsigned long last_crtr;
 static u32 irqmask;
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 380f12a12200..accb69ec478e 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -15,11 +15,11 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9260.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 86cba4ac29b1..7774d17dde74 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -16,12 +16,12 @@
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9260.h>
-#include <asm/arch/at91sam9260_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9260.h>
+#include <mach/at91sam9260_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -283,8 +283,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -302,7 +302,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91sam9260_nand_device = {
-	.name		= "at91_nand",
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -311,7 +311,7 @@ static struct platform_device at91sam9260_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa, mode;
 
@@ -373,7 +373,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	platform_device_register(&at91sam9260_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 35bf6fd52516..7b51a59ae8b3 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -15,10 +15,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91sam9261.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index ec1891375dfb..6b89172310c7 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -20,11 +20,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91sam9261_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9261.h>
+#include <mach/at91sam9261_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -198,8 +198,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -211,8 +211,8 @@ static struct resource nand_resources[] = {
 	}
 };
 
-static struct platform_device at91_nand_device = {
-	.name		= "at91_nand",
+static struct platform_device atmel_nand_device = {
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -221,7 +221,7 @@ static struct platform_device at91_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa, mode;
 
@@ -262,11 +262,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	at91_set_A_periph(AT91_PIN_PC1, 0);		/* NANDWE */
 
 	nand_data = *data;
-	platform_device_register(&at91_nand_device);
+	platform_device_register(&atmel_nand_device);
 }
 
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 052074a9f2d3..80bfab5680e2 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -15,10 +15,10 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 8a81f76f0200..c93992f55dc9 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -19,11 +19,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91sam9263_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91sam9263_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -352,8 +352,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -371,7 +371,7 @@ static struct resource nand_resources[] = {
 };
 
 static struct platform_device at91sam9263_nand_device = {
-	.name		= "at91_nand",
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -380,7 +380,7 @@ static struct platform_device at91sam9263_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa, mode;
 
@@ -421,7 +421,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	platform_device_register(&at91sam9263_nand_device);
 }
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 5cecbd7de6a6..122fd77ed580 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -17,7 +17,7 @@
 
 #include <asm/mach/time.h>
 
-#include <asm/arch/at91_pit.h>
+#include <mach/at91_pit.h>
 
 
 #define PIT_CPIV(x)	((x) & AT91_PIT_CPIV)
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 902c79893ec7..556bddf35b45 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -14,11 +14,11 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/at91sam9rl.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/cpu.h>
+#include <mach/at91sam9rl.h>
+#include <mach/at91_pmc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 #include "clock.h"
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index ae28101e7542..620886341fb5 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -16,11 +16,11 @@
 #include <linux/fb.h>
 #include <video/atmel_lcdc.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9rl.h>
-#include <asm/arch/at91sam9rl_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9rl.h>
+#include <mach/at91sam9rl_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -194,8 +194,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
  *  NAND / SmartMedia
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
-static struct at91_nand_data nand_data;
+#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
+static struct atmel_nand_data nand_data;
 
 #define NAND_BASE	AT91_CHIPSELECT_3
 
@@ -212,8 +212,8 @@ static struct resource nand_resources[] = {
 	}
 };
 
-static struct platform_device at91_nand_device = {
-	.name		= "at91_nand",
+static struct platform_device atmel_nand_device = {
+	.name		= "atmel_nand",
 	.id		= -1,
 	.dev		= {
 				.platform_data	= &nand_data,
@@ -222,7 +222,7 @@ static struct platform_device at91_nand_device = {
 	.num_resources	= ARRAY_SIZE(nand_resources),
 };
 
-void __init at91_add_device_nand(struct at91_nand_data *data)
+void __init at91_add_device_nand(struct atmel_nand_data *data)
 {
 	unsigned long csa;
 
@@ -259,11 +259,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data)
 	at91_set_A_periph(AT91_PIN_PB5, 0);		/* NANDWE */
 
 	nand_data = *data;
-	platform_device_register(&at91_nand_device);
+	platform_device_register(&atmel_nand_device);
 }
 
 #else
-void __init at91_add_device_nand(struct at91_nand_data *data) {}
+void __init at91_add_device_nand(struct atmel_nand_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index f44647738ee4..ad3ec85b2790 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -14,9 +14,9 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/at91x40.h>
-#include <asm/arch/at91_st.h>
-#include <asm/arch/timex.h>
+#include <mach/at91x40.h>
+#include <mach/at91_st.h>
+#include <mach/timex.h>
 #include "generic.h"
 
 /*
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index eddc882f1b4a..869b5e28d195 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -23,10 +23,10 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/time.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/time.h>
-#include <asm/arch/at91_tc.h>
+#include <mach/at91_tc.h>
 
 /*
  *	3 counter/timer units present.
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 2d3d4b6f7b02..9b27d167bff0 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -24,7 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -33,8 +33,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index b22a1a004055..cdddca54b938 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -28,7 +28,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
@@ -142,7 +142,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return cam60_nand_partition;
 }
 
-static struct at91_nand_data __initdata cam60_nand_data = {
+static struct atmel_nand_data __initdata cam60_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 	// .det_pin	= ... not there
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 8a2a958639db..196199552eb6 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -33,7 +33,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,10 +42,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91cap9_matrix.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -181,14 +181,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return cap9adk_nand_partitions;
 }
 
-static struct at91_nand_data __initdata cap9adk_nand_data = {
+static struct atmel_nand_data __initdata cap9adk_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 //	.rdy_pin	= ... not connected
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
@@ -330,10 +330,10 @@ static void __init cap9adk_board_init(void)
 	/* Serial */
 	at91_add_device_serial();
 	/* USB Host */
-	set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH);
+	set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_usbh(&cap9adk_usbh_data);
 	/* USB HS */
-	set_irq_type(AT91CAP9_ID_UDPHS, IRQT_HIGH);
+	set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_usba(&cap9adk_usba_udc_data);
 	/* SPI */
 	at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices));
@@ -350,7 +350,7 @@ static void __init cap9adk_board_init(void)
 	/* I2C */
 	at91_add_device_i2c(NULL, 0);
 	/* LCD Controller */
-	set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH);
+	set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
 	at91_add_device_lcdc(&cap9adk_lcdc_data);
 	/* AC97 */
 	at91_add_device_ac97(&cap9adk_ac97_data);
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 9854fc3dd1f2..afa1ff0e9577 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 81f1ebb4e964..cb7c9a8fa487 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -28,7 +28,7 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index bb1a5474ddab..8db8bd8babd9 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -25,7 +25,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c
index dab958d25926..43e1aa7ecef7 100644
--- a/arch/arm/mach-at91/board-dk.c
+++ b/arch/arm/mach-at91/board-dk.c
@@ -29,7 +29,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
@@ -147,7 +147,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return dk_nand_partition;
 }
 
-static struct at91_nand_data __initdata dk_nand_data = {
+static struct atmel_nand_data __initdata dk_nand_data = {
 	.ale		= 22,
 	.cle		= 21,
 	.det_pin	= AT91_PIN_PB1,
diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c
index 0c1e3858e7df..1f9d3cb64c50 100644
--- a/arch/arm/mach-at91/board-eb01.c
+++ b/arch/arm/mach-at91/board-eb01.c
@@ -24,10 +24,10 @@
 #include <linux/platform_device.h>
 #include <linux/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/board.h>
+#include <mach/board.h>
 #include "generic.h"
 
 static void __init at91eb01_map_io(void)
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 3fe054e0056b..528656761ff7 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index e77fad443835..bfeee8a2af28 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -27,7 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,8 +36,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-ek.c
index 74aa4325eab3..60626e7a3490 100644
--- a/arch/arm/mach-at91/board-ek.c
+++ b/arch/arm/mach-at91/board-ek.c
@@ -29,7 +29,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index cf1b7b2f76fb..a87956c0a74f 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -24,7 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -33,8 +33,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index cb065febd95e..fe9b9913fa3c 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -25,7 +25,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -34,10 +34,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
@@ -105,7 +105,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return kb9202_nand_partition;
 }
 
-static struct at91_nand_data __initdata kb9202_nand_data = {
+static struct atmel_nand_data __initdata kb9202_nand_data = {
 	.ale		= 22,
 	.cle		= 21,
 	// .det_pin	= ... not there
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 6acb55c09ae5..dbc912d633c7 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -27,7 +27,7 @@
 #include <linux/spi/spi.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,9 +36,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 99b4ec3818d6..4c28413426c2 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -30,7 +30,7 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,9 +39,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 
@@ -140,14 +140,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 8f76af5e219a..e4910cb26c16 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -27,7 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -36,8 +36,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
@@ -141,14 +141,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 4d1d9c777084..cb20e70b3b06 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -28,7 +28,7 @@
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -37,8 +37,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
@@ -178,14 +178,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 08382c0df221..1a9963b811c7 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -35,7 +35,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -44,9 +44,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -183,14 +183,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 22,
 	.cle		= 21,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC15,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index b4cd5d0ed597..b1d11960a735 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -32,7 +32,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -41,9 +41,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -187,14 +187,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 45617c201240..d4eba5c0ce02 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -26,7 +26,7 @@
 #include <linux/spi/at73c213.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -35,8 +35,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
@@ -143,13 +143,13 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 }
 
 /* det_pin is not connected */
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index b6a70fc735c3..c6dce49c388c 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -18,7 +18,7 @@
 
 #include <video/atmel_lcdc.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -27,9 +27,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91sam9_smc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
 
 #include "generic.h"
 
@@ -96,7 +96,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
index 837aedf8ffeb..f9d0b65da40b 100644
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ b/arch/arm/mach-at91/board-usb-a9260.c
@@ -30,7 +30,7 @@
 #include <linux/input.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -39,9 +39,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 
@@ -114,14 +114,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PC13,
 	.enable_pin	= AT91_PIN_PC14,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
index 95800d32bd49..673e5c27214d 100644
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ b/arch/arm/mach-at91/board-usb-a9263.c
@@ -29,7 +29,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91_shdwc.h>
 
 #include "generic.h"
 
@@ -127,14 +127,14 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return ek_nand_partition;
 }
 
-static struct at91_nand_data __initdata ek_nand_data = {
+static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 //	.det_pin	= ... not connected
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
 	.partition_info	= nand_partitions,
-#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
 	.bus_width_16	= 1,
 #else
 	.bus_width_16	= 0,
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 7079050ab88d..36b380aad006 100755..100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -33,7 +33,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
@@ -42,9 +42,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
 
@@ -180,7 +180,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio
 	return yl9200_nand_partition;
 }
 
-static struct at91_nand_data __initdata yl9200_nand_data = {
+static struct atmel_nand_data __initdata yl9200_nand_data = {
 	.ale		= 6,
 	.cle		= 7,
 	// .det_pin	= ... not connected
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 464bdbbf74df..f5c2847161f5 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -24,11 +24,10 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/mach-types.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/cpu.h>
+#include <mach/hardware.h>
+#include <mach/at91_pmc.h>
+#include <mach/cpu.h>
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index ee4964abcaf5..8392d5b517f1 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -20,9 +20,9 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/at91_pio.h>
+#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/include/mach/at91_adc.h b/arch/arm/mach-at91/include/mach/at91_adc.h
new file mode 100644
index 000000000000..8e7ed5c90817
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_adc.h
@@ -0,0 +1,61 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_adc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Analog-to-Digital Converter (ADC) registers.
+ * Based on AT91SAM9260 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_ADC_H
+#define AT91_ADC_H
+
+#define AT91_ADC_CR		0x00		/* Control Register */
+#define		AT91_ADC_SWRST		(1 << 0)	/* Software Reset */
+#define		AT91_ADC_START		(1 << 1)	/* Start Conversion */
+
+#define AT91_ADC_MR		0x04		/* Mode Register */
+#define		AT91_ADC_TRGEN		(1 << 0)	/* Trigger Enable */
+#define		AT91_ADC_TRGSEL		(7 << 1)	/* Trigger Selection */
+#define			AT91_ADC_TRGSEL_TC0		(0 << 1)
+#define			AT91_ADC_TRGSEL_TC1		(1 << 1)
+#define			AT91_ADC_TRGSEL_TC2		(2 << 1)
+#define			AT91_ADC_TRGSEL_EXTERNAL	(6 << 1)
+#define		AT91_ADC_LOWRES		(1 << 4)	/* Low Resolution */
+#define		AT91_ADC_SLEEP		(1 << 5)	/* Sleep Mode */
+#define		AT91_ADC_PRESCAL	(0x3f << 8)	/* Prescalar Rate Selection */
+#define			AT91_ADC_PRESCAL_(x)	((x) << 8)
+#define		AT91_ADC_STARTUP	(0x1f << 16)	/* Startup Up Time */
+#define			AT91_ADC_STARTUP_(x)	((x) << 16)
+#define		AT91_ADC_SHTIM		(0xf  << 24)	/* Sample & Hold Time */
+#define			AT91_ADC_SHTIM_(x)	((x) << 24)
+
+#define AT91_ADC_CHER		0x10		/* Channel Enable Register */
+#define AT91_ADC_CHDR		0x14		/* Channel Disable Register */
+#define AT91_ADC_CHSR		0x18		/* Channel Status Register */
+#define		AT91_ADC_CH(n)		(1 << (n))	/* Channel Number */
+
+#define AT91_ADC_SR		0x1C		/* Status Register */
+#define		AT91_ADC_EOC(n)		(1 << (n))	/* End of Conversion on Channel N */
+#define		AT91_ADC_OVRE(n)	(1 << ((n) + 8))/* Overrun Error on Channel N */
+#define		AT91_ADC_DRDY		(1 << 16)	/* Data Ready */
+#define		AT91_ADC_GOVRE		(1 << 17)	/* General Overrun Error */
+#define		AT91_ADC_ENDRX		(1 << 18)	/* End of RX Buffer */
+#define		AT91_ADC_RXFUFF		(1 << 19)	/* RX Buffer Full */
+
+#define AT91_ADC_LCDR		0x20		/* Last Converted Data Register */
+#define		AT91_ADC_LDATA		(0x3ff)
+
+#define AT91_ADC_IER		0x24		/* Interrupt Enable Register */
+#define AT91_ADC_IDR		0x28		/* Interrupt Disable Register */
+#define AT91_ADC_IMR		0x2C		/* Interrupt Mask Register */
+
+#define AT91_ADC_CHR(n)		(0x30 + ((n) * 4))	/* Channel Data Register N */
+#define		AT91_ADC_DATA		(0x3ff)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/include/mach/at91_aic.h
new file mode 100644
index 000000000000..03566799d3be
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_aic.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_aic.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Advanced Interrupt Controller (AIC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_AIC_H
+#define AT91_AIC_H
+
+#define AT91_AIC_SMR(n)		(AT91_AIC + ((n) * 4))	/* Source Mode Registers 0-31 */
+#define		AT91_AIC_PRIOR		(7 << 0)		/* Priority Level */
+#define		AT91_AIC_SRCTYPE	(3 << 5)		/* Interrupt Source Type */
+#define			AT91_AIC_SRCTYPE_LOW		(0 << 5)
+#define			AT91_AIC_SRCTYPE_FALLING	(1 << 5)
+#define			AT91_AIC_SRCTYPE_HIGH		(2 << 5)
+#define			AT91_AIC_SRCTYPE_RISING		(3 << 5)
+
+#define AT91_AIC_SVR(n)		(AT91_AIC + 0x80 + ((n) * 4))	/* Source Vector Registers 0-31 */
+#define AT91_AIC_IVR		(AT91_AIC + 0x100)	/* Interrupt Vector Register */
+#define AT91_AIC_FVR		(AT91_AIC + 0x104)	/* Fast Interrupt Vector Register */
+#define AT91_AIC_ISR		(AT91_AIC + 0x108)	/* Interrupt Status Register */
+#define		AT91_AIC_IRQID		(0x1f << 0)		/* Current Interrupt Identifier */
+
+#define AT91_AIC_IPR		(AT91_AIC + 0x10c)	/* Interrupt Pending Register */
+#define AT91_AIC_IMR		(AT91_AIC + 0x110)	/* Interrupt Mask Register */
+#define AT91_AIC_CISR		(AT91_AIC + 0x114)	/* Core Interrupt Status Register */
+#define		AT91_AIC_NFIQ		(1 << 0)		/* nFIQ Status */
+#define		AT91_AIC_NIRQ		(1 << 1)		/* nIRQ Status */
+
+#define AT91_AIC_IECR		(AT91_AIC + 0x120)	/* Interrupt Enable Command Register */
+#define AT91_AIC_IDCR		(AT91_AIC + 0x124)	/* Interrupt Disable Command Register */
+#define AT91_AIC_ICCR		(AT91_AIC + 0x128)	/* Interrupt Clear Command Register */
+#define AT91_AIC_ISCR		(AT91_AIC + 0x12c)	/* Interrupt Set Command Register */
+#define AT91_AIC_EOICR		(AT91_AIC + 0x130)	/* End of Interrupt Command Register */
+#define AT91_AIC_SPU		(AT91_AIC + 0x134)	/* Spurious Interrupt Vector Register */
+#define AT91_AIC_DCR		(AT91_AIC + 0x138)	/* Debug Control Register */
+#define		AT91_AIC_DCR_PROT	(1 << 0)		/* Protection Mode */
+#define		AT91_AIC_DCR_GMSK	(1 << 1)		/* General Mask */
+
+#define AT91_AIC_FFER		(AT91_AIC + 0x140)	/* Fast Forcing Enable Register [SAM9 only] */
+#define AT91_AIC_FFDR		(AT91_AIC + 0x144)	/* Fast Forcing Disable Register [SAM9 only] */
+#define AT91_AIC_FFSR		(AT91_AIC + 0x148)	/* Fast Forcing Status Register [SAM9 only] */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h
new file mode 100644
index 000000000000..6dcaa7716871
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_dbgu.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Debug Unit (DBGU) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_DBGU_H
+#define AT91_DBGU_H
+
+#ifdef AT91_DBGU
+#define AT91_DBGU_CR		(AT91_DBGU + 0x00)	/* Control Register */
+#define AT91_DBGU_MR		(AT91_DBGU + 0x04)	/* Mode Register */
+#define AT91_DBGU_IER		(AT91_DBGU + 0x08)	/* Interrupt Enable Register */
+#define		AT91_DBGU_TXRDY		(1 << 1)		/* Transmitter Ready */
+#define		AT91_DBGU_TXEMPTY	(1 << 9)		/* Transmitter Empty */
+#define AT91_DBGU_IDR		(AT91_DBGU + 0x0c)	/* Interrupt Disable Register */
+#define AT91_DBGU_IMR		(AT91_DBGU + 0x10)	/* Interrupt Mask Register */
+#define AT91_DBGU_SR		(AT91_DBGU + 0x14)	/* Status Register */
+#define AT91_DBGU_RHR		(AT91_DBGU + 0x18)	/* Receiver Holding Register */
+#define AT91_DBGU_THR		(AT91_DBGU + 0x1c)	/* Transmitter Holding Register */
+#define AT91_DBGU_BRGR		(AT91_DBGU + 0x20)	/* Baud Rate Generator Register */
+
+#define AT91_DBGU_CIDR		(AT91_DBGU + 0x40)	/* Chip ID Register */
+#define AT91_DBGU_EXID		(AT91_DBGU + 0x44)	/* Chip ID Extension Register */
+#define AT91_DBGU_FNR		(AT91_DBGU + 0x48)	/* Force NTRST Register [SAM9 only] */
+#define		AT91_DBGU_FNTRST	(1 << 0)		/* Force NTRST */
+
+#endif /* AT91_DBGU */
+
+/*
+ * Some AT91 parts that don't have full DEBUG units still support the ID
+ * and extensions register.
+ */
+#define		AT91_CIDR_VERSION	(0x1f << 0)		/* Version of the Device */
+#define		AT91_CIDR_EPROC		(7    << 5)		/* Embedded Processor */
+#define		AT91_CIDR_NVPSIZ	(0xf  << 8)		/* Nonvolatile Program Memory Size */
+#define		AT91_CIDR_NVPSIZ2	(0xf  << 12)		/* Second Nonvolatile Program Memory Size */
+#define		AT91_CIDR_SRAMSIZ	(0xf  << 16)		/* Internal SRAM Size */
+#define			AT91_CIDR_SRAMSIZ_1K	(1 << 16)
+#define			AT91_CIDR_SRAMSIZ_2K	(2 << 16)
+#define			AT91_CIDR_SRAMSIZ_112K	(4 << 16)
+#define			AT91_CIDR_SRAMSIZ_4K	(5 << 16)
+#define			AT91_CIDR_SRAMSIZ_80K	(6 << 16)
+#define			AT91_CIDR_SRAMSIZ_160K	(7 << 16)
+#define			AT91_CIDR_SRAMSIZ_8K	(8 << 16)
+#define			AT91_CIDR_SRAMSIZ_16K	(9 << 16)
+#define			AT91_CIDR_SRAMSIZ_32K	(10 << 16)
+#define			AT91_CIDR_SRAMSIZ_64K	(11 << 16)
+#define			AT91_CIDR_SRAMSIZ_128K	(12 << 16)
+#define			AT91_CIDR_SRAMSIZ_256K	(13 << 16)
+#define			AT91_CIDR_SRAMSIZ_96K	(14 << 16)
+#define			AT91_CIDR_SRAMSIZ_512K	(15 << 16)
+#define		AT91_CIDR_ARCH		(0xff << 20)		/* Architecture Identifier */
+#define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
+#define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h
new file mode 100644
index 000000000000..550d503a1bca
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_mci.h
@@ -0,0 +1,113 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_mci.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * MultiMedia Card Interface (MCI) registers.
+ * Based on AT91RM9200 datasheet revision F.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_MCI_H
+#define AT91_MCI_H
+
+#define AT91_MCI_CR		0x00		/* Control Register */
+#define		AT91_MCI_MCIEN		(1 <<  0)	/* Multi-Media Interface Enable */
+#define		AT91_MCI_MCIDIS		(1 <<  1)	/* Multi-Media Interface Disable */
+#define		AT91_MCI_PWSEN		(1 <<  2)	/* Power Save Mode Enable */
+#define		AT91_MCI_PWSDIS		(1 <<  3)	/* Power Save Mode Disable */
+#define		AT91_MCI_SWRST		(1 <<  7)	/* Software Reset */
+
+#define AT91_MCI_MR		0x04		/* Mode Register */
+#define		AT91_MCI_CLKDIV		(0xff  <<  0)	/* Clock Divider */
+#define		AT91_MCI_PWSDIV		(7     <<  8)	/* Power Saving Divider */
+#define		AT91_MCI_RDPROOF	(1     << 11)	/* Read Proof Enable [SAM926[03] only] */
+#define		AT91_MCI_WRPROOF	(1     << 12)	/* Write Proof Enable [SAM926[03] only] */
+#define		AT91_MCI_PDCFBYTE	(1     << 13)	/* PDC Force Byte Transfer [SAM926[03] only] */
+#define		AT91_MCI_PDCPADV	(1     << 14)	/* PDC Padding Value */
+#define		AT91_MCI_PDCMODE	(1     << 15)	/* PDC-orientated Mode */
+#define		AT91_MCI_BLKLEN		(0xfff << 18)	/* Data Block Length */
+
+#define AT91_MCI_DTOR		0x08		/* Data Timeout Register */
+#define		AT91_MCI_DTOCYC		(0xf << 0)	/* Data Timeout Cycle Number */
+#define		AT91_MCI_DTOMUL		(7   << 4)	/* Data Timeout Multiplier */
+#define		AT91_MCI_DTOMUL_1		(0 <<  4)
+#define		AT91_MCI_DTOMUL_16		(1 <<  4)
+#define		AT91_MCI_DTOMUL_128		(2 <<  4)
+#define		AT91_MCI_DTOMUL_256		(3 <<  4)
+#define		AT91_MCI_DTOMUL_1K		(4 <<  4)
+#define		AT91_MCI_DTOMUL_4K		(5 <<  4)
+#define		AT91_MCI_DTOMUL_64K		(6 <<  4)
+#define		AT91_MCI_DTOMUL_1M		(7 <<  4)
+
+#define AT91_MCI_SDCR		0x0c		/* SD Card Register */
+#define		AT91_MCI_SDCSEL		(3 << 0)	/* SD Card Selector */
+#define		AT91_MCI_SDCBUS		(1 << 7)	/* 1-bit or 4-bit bus */
+
+#define AT91_MCI_ARGR		0x10		/* Argument Register */
+
+#define AT91_MCI_CMDR		0x14		/* Command Register */
+#define		AT91_MCI_CMDNB		(0x3f << 0)	/* Command Number */
+#define		AT91_MCI_RSPTYP		(3    << 6)	/* Response Type */
+#define			AT91_MCI_RSPTYP_NONE	(0 <<  6)
+#define			AT91_MCI_RSPTYP_48	(1 <<  6)
+#define			AT91_MCI_RSPTYP_136	(2 <<  6)
+#define		AT91_MCI_SPCMD		(7    << 8)	/* Special Command */
+#define			AT91_MCI_SPCMD_NONE	(0 <<  8)
+#define			AT91_MCI_SPCMD_INIT	(1 <<  8)
+#define			AT91_MCI_SPCMD_SYNC	(2 <<  8)
+#define			AT91_MCI_SPCMD_ICMD	(4 <<  8)
+#define			AT91_MCI_SPCMD_IRESP	(5 <<  8)
+#define		AT91_MCI_OPDCMD		(1 << 11)	/* Open Drain Command */
+#define		AT91_MCI_MAXLAT		(1 << 12)	/* Max Latency for Command to Response */
+#define		AT91_MCI_TRCMD		(3 << 16)	/* Transfer Command */
+#define			AT91_MCI_TRCMD_NONE	(0 << 16)
+#define			AT91_MCI_TRCMD_START	(1 << 16)
+#define			AT91_MCI_TRCMD_STOP	(2 << 16)
+#define		AT91_MCI_TRDIR		(1 << 18)	/* Transfer Direction */
+#define		AT91_MCI_TRTYP		(3 << 19)	/* Transfer Type */
+#define			AT91_MCI_TRTYP_BLOCK	(0 << 19)
+#define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
+#define			AT91_MCI_TRTYP_STREAM	(2 << 19)
+
+#define AT91_MCI_BLKR		0x18		/* Block Register */
+#define		AT91_MCI_BLKR_BCNT(n)	((0xffff & (n)) << 0)	/* Block count */
+#define		AT91_MCI_BLKR_BLKLEN(n)	((0xffff & (n)) << 16)	/* Block lenght */
+
+#define AT91_MCI_RSPR(n)	(0x20 + ((n) * 4))	/* Response Registers 0-3 */
+#define AT91_MCR_RDR		0x30		/* Receive Data Register */
+#define AT91_MCR_TDR		0x34		/* Transmit Data Register */
+
+#define AT91_MCI_SR		0x40		/* Status Register */
+#define		AT91_MCI_CMDRDY		(1 <<  0)	/* Command Ready */
+#define		AT91_MCI_RXRDY		(1 <<  1)	/* Receiver Ready */
+#define		AT91_MCI_TXRDY		(1 <<  2)	/* Transmit Ready */
+#define		AT91_MCI_BLKE		(1 <<  3)	/* Data Block Ended */
+#define		AT91_MCI_DTIP		(1 <<  4)	/* Data Transfer in Progress */
+#define		AT91_MCI_NOTBUSY	(1 <<  5)	/* Data Not Busy */
+#define		AT91_MCI_ENDRX		(1 <<  6)	/* End of RX Buffer */
+#define		AT91_MCI_ENDTX		(1 <<  7)	/* End fo TX Buffer */
+#define		AT91_MCI_SDIOIRQA	(1 <<  8)	/* SDIO Interrupt for Slot A */
+#define		AT91_MCI_SDIOIRQB	(1 <<  9)	/* SDIO Interrupt for Slot B */
+#define		AT91_MCI_RXBUFF		(1 << 14)	/* RX Buffer Full */
+#define		AT91_MCI_TXBUFE		(1 << 15)	/* TX Buffer Empty */
+#define		AT91_MCI_RINDE		(1 << 16)	/* Response Index Error */
+#define		AT91_MCI_RDIRE		(1 << 17)	/* Response Direction Error */
+#define		AT91_MCI_RCRCE		(1 << 18)	/* Response CRC Error */
+#define		AT91_MCI_RENDE		(1 << 19)	/* Response End Bit Error */
+#define		AT91_MCI_RTOE		(1 << 20)	/* Reponse Time-out Error */
+#define		AT91_MCI_DCRCE		(1 << 21)	/* Data CRC Error */
+#define		AT91_MCI_DTOE		(1 << 22)	/* Data Time-out Error */
+#define		AT91_MCI_OVRE		(1 << 30)	/* Overrun */
+#define		AT91_MCI_UNRE		(1 << 31)	/* Underrun */
+
+#define AT91_MCI_IER		0x44		/* Interrupt Enable Register */
+#define AT91_MCI_IDR		0x48		/* Interrupt Disable Register */
+#define AT91_MCI_IMR		0x4c		/* Interrupt Mask Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h
new file mode 100644
index 000000000000..c6a31bf8a5c6
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_pio.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_pio.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Parallel I/O Controller (PIO) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIO_H
+#define AT91_PIO_H
+
+#define PIO_PER		0x00	/* Enable Register */
+#define PIO_PDR		0x04	/* Disable Register */
+#define PIO_PSR		0x08	/* Status Register */
+#define PIO_OER		0x10	/* Output Enable Register */
+#define PIO_ODR		0x14	/* Output Disable Register */
+#define PIO_OSR		0x18	/* Output Status Register */
+#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
+#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
+#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
+#define PIO_SODR	0x30	/* Set Output Data Register */
+#define PIO_CODR	0x34	/* Clear Output Data Register */
+#define PIO_ODSR	0x38	/* Output Data Status Register */
+#define PIO_PDSR	0x3c	/* Pin Data Status Register */
+#define PIO_IER		0x40	/* Interrupt Enable Register */
+#define PIO_IDR		0x44	/* Interrupt Disable Register */
+#define PIO_IMR		0x48	/* Interrupt Mask Register */
+#define PIO_ISR		0x4c	/* Interrupt Status Register */
+#define PIO_MDER	0x50	/* Multi-driver Enable Register */
+#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
+#define PIO_MDSR	0x58	/* Multi-driver Status Register */
+#define PIO_PUDR	0x60	/* Pull-up Disable Register */
+#define PIO_PUER	0x64	/* Pull-up Enable Register */
+#define PIO_PUSR	0x68	/* Pull-up Status Register */
+#define PIO_ASR		0x70	/* Peripheral A Select Register */
+#define PIO_BSR		0x74	/* Peripheral B Select Register */
+#define PIO_ABSR	0x78	/* AB Status Register */
+#define PIO_OWER	0xa0	/* Output Write Enable Register */
+#define PIO_OWDR	0xa4	/* Output Write Disable Register */
+#define PIO_OWSR	0xa8	/* Output Write Status Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_pit.h b/arch/arm/mach-at91/include/mach/at91_pit.h
new file mode 100644
index 000000000000..0448ac36eadb
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_pit.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_pit.h
+ *
+ * Periodic Interval Timer (PIT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIT_H
+#define AT91_PIT_H
+
+#define AT91_PIT_MR		(AT91_PIT + 0x00)	/* Mode Register */
+#define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
+#define		AT91_PIT_PITEN		(1 << 24)		/* Timer Enabled */
+#define		AT91_PIT_PIV		(0xfffff)		/* Periodic Interval Value */
+
+#define AT91_PIT_SR		(AT91_PIT + 0x04)	/* Status Register */
+#define		AT91_PIT_PITS		(1 << 0)		/* Timer Status */
+
+#define AT91_PIT_PIVR		(AT91_PIT + 0x08)	/* Periodic Interval Value Register */
+#define AT91_PIT_PIIR		(AT91_PIT + 0x0c)	/* Periodic Interval Image Register */
+#define		AT91_PIT_PICNT		(0xfff << 20)		/* Interval Counter */
+#define		AT91_PIT_CPIV		(0xfffff)		/* Inverval Value */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
new file mode 100644
index 000000000000..2e3f2894b704
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -0,0 +1,111 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_pmc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Power Management Controller (PMC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PMC_H
+#define AT91_PMC_H
+
+#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
+#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
+
+#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
+#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
+#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
+#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
+#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
+#define		AT91CAP9_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91CAP9 only] */
+#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
+#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
+#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
+#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
+
+#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
+#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
+#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
+
+#define	AT91_CKGR_UCKR		(AT91_PMC + 0x1C)	/* UTMI Clock Register [SAM9RL, CAP9] */
+#define		AT91_PMC_UPLLEN		(1   << 16)		/* UTMI PLL Enable */
+#define		AT91_PMC_UPLLCOUNT	(0xf << 20)		/* UTMI PLL Start-up Time */
+#define		AT91_PMC_BIASEN		(1   << 24)		/* UTMI BIAS Enable */
+#define		AT91_PMC_BIASCOUNT	(0xf << 28)		/* UTMI PLL Start-up Time */
+
+#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register [not on SAM9RL] */
+#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
+#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [SAM9x, CAP9] */
+#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
+
+#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
+#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
+#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
+
+#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
+#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
+#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
+#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
+#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
+#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
+#define		AT91_PMC_USBDIV		(3     << 28)		/* USB Divisor (PLLB only) */
+#define			AT91_PMC_USBDIV_1		(0 << 28)
+#define			AT91_PMC_USBDIV_2		(1 << 28)
+#define			AT91_PMC_USBDIV_4		(2 << 28)
+#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
+
+#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
+#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
+#define			AT91_PMC_CSS_SLOW		(0 << 0)
+#define			AT91_PMC_CSS_MAIN		(1 << 0)
+#define			AT91_PMC_CSS_PLLA		(2 << 0)
+#define			AT91_PMC_CSS_PLLB		(3 << 0)
+#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
+#define			AT91_PMC_PRES_1			(0 << 2)
+#define			AT91_PMC_PRES_2			(1 << 2)
+#define			AT91_PMC_PRES_4			(2 << 2)
+#define			AT91_PMC_PRES_8			(3 << 2)
+#define			AT91_PMC_PRES_16		(4 << 2)
+#define			AT91_PMC_PRES_32		(5 << 2)
+#define			AT91_PMC_PRES_64		(6 << 2)
+#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
+#define			AT91RM9200_PMC_MDIV_1		(0 << 8)	/* [AT91RM9200 only] */
+#define			AT91RM9200_PMC_MDIV_2		(1 << 8)
+#define			AT91RM9200_PMC_MDIV_3		(2 << 8)
+#define			AT91RM9200_PMC_MDIV_4		(3 << 8)
+#define			AT91SAM9_PMC_MDIV_1		(0 << 8)	/* [SAM9,CAP9 only] */
+#define			AT91SAM9_PMC_MDIV_2		(1 << 8)
+#define			AT91SAM9_PMC_MDIV_4		(2 << 8)
+#define			AT91SAM9_PMC_MDIV_6		(3 << 8)
+#define		AT91_PMC_PDIV		(1 << 12)		/* Processor Clock Division [some SAM9 only] */
+#define			AT91_PMC_PDIV_1			(0 << 12)
+#define			AT91_PMC_PDIV_2			(1 << 12)
+
+#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
+
+#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
+#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
+#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
+#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
+#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
+#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
+#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
+#define		AT91_PMC_LOCKU		(1 <<  6)		/* UPLL Lock [AT91CAP9 only] */
+#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
+#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/include/mach/at91_rstc.h
new file mode 100644
index 000000000000..7cd1b39aaa43
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_rstc.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_rstc.h
+ *
+ * Reset Controller (RSTC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RSTC_H
+#define AT91_RSTC_H
+
+#define AT91_RSTC_CR		(AT91_RSTC + 0x00)	/* Reset Controller Control Register */
+#define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
+#define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
+#define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
+#define		AT91_RSTC_KEY		(0xa5 << 24)		/* KEY Password */
+
+#define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
+#define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
+#define		AT91_RSTC_RSTTYP	(7 << 8)		/* Reset Type */
+#define			AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
+#define			AT91_RSTC_RSTTYP_WAKEUP		(1 << 8)
+#define			AT91_RSTC_RSTTYP_WATCHDOG	(2 << 8)
+#define			AT91_RSTC_RSTTYP_SOFTWARE	(3 << 8)
+#define			AT91_RSTC_RSTTYP_USER	(4 << 8)
+#define		AT91_RSTC_NRSTL		(1 << 16)		/* NRST Pin Level */
+#define		AT91_RSTC_SRCMP		(1 << 17)		/* Software Reset Command in Progress */
+
+#define AT91_RSTC_MR		(AT91_RSTC + 0x08)	/* Reset Controller Mode Register */
+#define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
+#define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
+#define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_rtc.h b/arch/arm/mach-at91/include/mach/at91_rtc.h
new file mode 100644
index 000000000000..e56f4701a3e5
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_rtc.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_rtc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Real Time Clock (RTC) - System peripheral registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTC_H
+#define AT91_RTC_H
+
+#define	AT91_RTC_CR		(AT91_RTC + 0x00)	/* Control Register */
+#define		AT91_RTC_UPDTIM		(1 <<  0)		/* Update Request Time Register */
+#define		AT91_RTC_UPDCAL		(1 <<  1)		/* Update Request Calendar Register */
+#define		AT91_RTC_TIMEVSEL	(3 <<  8)		/* Time Event Selection */
+#define			AT91_RTC_TIMEVSEL_MINUTE	(0 << 8)
+#define			AT91_RTC_TIMEVSEL_HOUR		(1 << 8)
+#define			AT91_RTC_TIMEVSEL_DAY24		(2 << 8)
+#define			AT91_RTC_TIMEVSEL_DAY12		(3 << 8)
+#define		AT91_RTC_CALEVSEL	(3 << 16)		/* Calendar Event Selection */
+#define			AT91_RTC_CALEVSEL_WEEK		(0 << 16)
+#define			AT91_RTC_CALEVSEL_MONTH		(1 << 16)
+#define			AT91_RTC_CALEVSEL_YEAR		(2 << 16)
+
+#define	AT91_RTC_MR		(AT91_RTC + 0x04)	/* Mode Register */
+#define			AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
+
+#define	AT91_RTC_TIMR		(AT91_RTC + 0x08)	/* Time Register */
+#define		AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
+#define		AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
+#define		AT91_RTC_HOUR		(0x3f << 16)		/* Current Hour */
+#define		AT91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
+
+#define	AT91_RTC_CALR		(AT91_RTC + 0x0c)	/* Calendar Register */
+#define		AT91_RTC_CENT		(0x7f <<  0)		/* Current Century */
+#define		AT91_RTC_YEAR		(0xff <<  8)		/* Current Year */
+#define		AT91_RTC_MONTH		(0x1f << 16)		/* Current Month */
+#define		AT91_RTC_DAY		(7    << 21)		/* Current Day */
+#define		AT91_RTC_DATE		(0x3f << 24)		/* Current Date */
+
+#define	AT91_RTC_TIMALR		(AT91_RTC + 0x10)	/* Time Alarm Register */
+#define		AT91_RTC_SECEN		(1 <<  7)		/* Second Alarm Enable */
+#define		AT91_RTC_MINEN		(1 << 15)		/* Minute Alarm Enable */
+#define		AT91_RTC_HOUREN		(1 << 23)		/* Hour Alarm Enable */
+
+#define	AT91_RTC_CALALR		(AT91_RTC + 0x14)	/* Calendar Alarm Register */
+#define		AT91_RTC_MTHEN		(1 << 23)		/* Month Alarm Enable */
+#define		AT91_RTC_DATEEN		(1 << 31)		/* Date Alarm Enable */
+
+#define	AT91_RTC_SR		(AT91_RTC + 0x18)	/* Status Register */
+#define		AT91_RTC_ACKUPD		(1 <<  0)		/* Acknowledge for Update */
+#define		AT91_RTC_ALARM		(1 <<  1)		/* Alarm Flag */
+#define		AT91_RTC_SECEV		(1 <<  2)		/* Second Event */
+#define		AT91_RTC_TIMEV		(1 <<  3)		/* Time Event */
+#define		AT91_RTC_CALEV		(1 <<  4)		/* Calendar Event */
+
+#define	AT91_RTC_SCCR		(AT91_RTC + 0x1c)	/* Status Clear Command Register */
+#define	AT91_RTC_IER		(AT91_RTC + 0x20)	/* Interrupt Enable Register */
+#define	AT91_RTC_IDR		(AT91_RTC + 0x24)	/* Interrupt Disable Register */
+#define	AT91_RTC_IMR		(AT91_RTC + 0x28)	/* Interrupt Mask Register */
+
+#define	AT91_RTC_VER		(AT91_RTC + 0x2c)	/* Valid Entry Register */
+#define		AT91_RTC_NVTIM		(1 <<  0)		/* Non valid Time */
+#define		AT91_RTC_NVCAL		(1 <<  1)		/* Non valid Calendar */
+#define		AT91_RTC_NVTIMALR	(1 <<  2)		/* Non valid Time Alarm */
+#define		AT91_RTC_NVCALALR	(1 <<  3)		/* Non valid Calendar Alarm */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_rtt.h b/arch/arm/mach-at91/include/mach/at91_rtt.h
new file mode 100644
index 000000000000..71782e5d2159
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_rtt.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_rtt.h
+ *
+ * Real-time Timer (RTT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTT_H
+#define AT91_RTT_H
+
+#define AT91_RTT_MR		0x00			/* Real-time Mode Register */
+#define		AT91_RTT_RTPRES		(0xffff << 0)		/* Real-time Timer Prescaler Value */
+#define		AT91_RTT_ALMIEN		(1 << 16)		/* Alarm Interrupt Enable */
+#define		AT91_RTT_RTTINCIEN	(1 << 17)		/* Real Time Timer Increment Interrupt Enable */
+#define		AT91_RTT_RTTRST		(1 << 18)		/* Real Time Timer Restart */
+
+#define AT91_RTT_AR		0x04			/* Real-time Alarm Register */
+#define		AT91_RTT_ALMV		(0xffffffff)		/* Alarm Value */
+
+#define AT91_RTT_VR		0x08			/* Real-time Value Register */
+#define		AT91_RTT_CRTV		(0xffffffff)		/* Current Real-time Value */
+
+#define AT91_RTT_SR		0x0c			/* Real-time Status Register */
+#define		AT91_RTT_ALMS		(1 << 0)		/* Real-time Alarm Status */
+#define		AT91_RTT_RTTINC		(1 << 1)		/* Real-time Timer Increment */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h
new file mode 100644
index 000000000000..60be5ae624f1
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_shdwc.h
+ *
+ * Shutdown Controller (SHDWC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SHDWC_H
+#define AT91_SHDWC_H
+
+#define AT91_SHDW_CR		(AT91_SHDWC + 0x00)	/* Shut Down Control Register */
+#define		AT91_SHDW_SHDW		(1    << 0)		/* Shut Down command */
+#define		AT91_SHDW_KEY		(0xa5 << 24)		/* KEY Password */
+
+#define AT91_SHDW_MR		(AT91_SHDWC + 0x04)	/* Shut Down Mode Register */
+#define		AT91_SHDW_WKMODE0	(3 << 0)		/* Wake-up 0 Mode Selection */
+#define			AT91_SHDW_WKMODE0_NONE		0
+#define			AT91_SHDW_WKMODE0_HIGH		1
+#define			AT91_SHDW_WKMODE0_LOW		2
+#define			AT91_SHDW_WKMODE0_ANYLEVEL	3
+#define		AT91_SHDW_CPTWK0	(0xf << 4)		/* Counter On Wake Up 0 */
+#define			AT91_SHDW_CPTWK0_(x)	((x) << 4)
+#define		AT91_SHDW_RTTWKEN	(1   << 16)		/* Real Time Timer Wake-up Enable */
+
+#define AT91_SHDW_SR		(AT91_SHDWC + 0x08)	/* Shut Down Status Register */
+#define		AT91_SHDW_WAKEUP0	(1 <<  0)		/* Wake-up 0 Status */
+#define		AT91_SHDW_RTTWK		(1 << 16)		/* Real-time Timer Wake-up */
+#define		AT91_SHDW_RTCWK		(1 << 17)		/* Real-time Clock Wake-up [SAM9RL] */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_spi.h b/arch/arm/mach-at91/include/mach/at91_spi.h
new file mode 100644
index 000000000000..2f6ba0c5636e
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_spi.h
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_spi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Serial Peripheral Interface (SPI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SPI_H
+#define AT91_SPI_H
+
+#define AT91_SPI_CR			0x00		/* Control Register */
+#define		AT91_SPI_SPIEN		(1 <<  0)		/* SPI Enable */
+#define		AT91_SPI_SPIDIS		(1 <<  1)		/* SPI Disable */
+#define		AT91_SPI_SWRST		(1 <<  7)		/* SPI Software Reset */
+#define		AT91_SPI_LASTXFER	(1 << 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_MR			0x04		/* Mode Register */
+#define		AT91_SPI_MSTR		(1    <<  0)		/* Master/Slave Mode */
+#define		AT91_SPI_PS		(1    <<  1)		/* Peripheral Select */
+#define			AT91_SPI_PS_FIXED	(0 << 1)
+#define			AT91_SPI_PS_VARIABLE	(1 << 1)
+#define		AT91_SPI_PCSDEC		(1    <<  2)		/* Chip Select Decode */
+#define		AT91_SPI_DIV32		(1    <<  3)		/* Clock Selection [AT91RM9200 only] */
+#define		AT91_SPI_MODFDIS	(1    <<  4)		/* Mode Fault Detection */
+#define		AT91_SPI_LLB		(1    <<  7)		/* Local Loopback Enable */
+#define		AT91_SPI_PCS		(0xf  << 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_DLYBCS		(0xff << 24)		/* Delay Between Chip Selects */
+
+#define AT91_SPI_RDR		0x08			/* Receive Data Register */
+#define		AT91_SPI_RD		(0xffff <<  0)		/* Receive Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+
+#define AT91_SPI_TDR		0x0c			/* Transmit Data Register */
+#define		AT91_SPI_TD		(0xffff <<  0)		/* Transmit Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_LASTXFER	(1	<< 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_SR		0x10			/* Status Register */
+#define		AT91_SPI_RDRF		(1 <<  0)		/* Receive Data Register Full */
+#define		AT91_SPI_TDRE		(1 <<  1)		/* Transmit Data Register Full */
+#define		AT91_SPI_MODF		(1 <<  2)		/* Mode Fault Error */
+#define		AT91_SPI_OVRES		(1 <<  3)		/* Overrun Error Status */
+#define		AT91_SPI_ENDRX		(1 <<  4)		/* End of RX buffer */
+#define		AT91_SPI_ENDTX		(1 <<  5)		/* End of TX buffer */
+#define		AT91_SPI_RXBUFF		(1 <<  6)		/* RX Buffer Full */
+#define		AT91_SPI_TXBUFE		(1 <<  7)		/* TX Buffer Empty */
+#define		AT91_SPI_NSSR		(1 <<  8)		/* NSS Rising [SAM9261 only] */
+#define		AT91_SPI_TXEMPTY	(1 <<  9)		/* Transmission Register Empty [SAM9261 only] */
+#define		AT91_SPI_SPIENS		(1 << 16)		/* SPI Enable Status */
+
+#define AT91_SPI_IER		0x14			/* Interrupt Enable Register */
+#define AT91_SPI_IDR		0x18			/* Interrupt Disable Register */
+#define AT91_SPI_IMR		0x1c			/* Interrupt Mask Register */
+
+#define AT91_SPI_CSR(n)		(0x30 + ((n) * 4))	/* Chip Select Registers 0-3 */
+#define		AT91_SPI_CPOL		(1    <<  0)		/* Clock Polarity */
+#define		AT91_SPI_NCPHA		(1    <<  1)		/* Clock Phase */
+#define		AT91_SPI_CSAAT		(1    <<  3)		/* Chip Select Active After Transfer [SAM9261 only] */
+#define		AT91_SPI_BITS		(0xf  <<  4)		/* Bits Per Transfer */
+#define			AT91_SPI_BITS_8		(0 << 4)
+#define			AT91_SPI_BITS_9		(1 << 4)
+#define			AT91_SPI_BITS_10	(2 << 4)
+#define			AT91_SPI_BITS_11	(3 << 4)
+#define			AT91_SPI_BITS_12	(4 << 4)
+#define			AT91_SPI_BITS_13	(5 << 4)
+#define			AT91_SPI_BITS_14	(6 << 4)
+#define			AT91_SPI_BITS_15	(7 << 4)
+#define			AT91_SPI_BITS_16	(8 << 4)
+#define		AT91_SPI_SCBR		(0xff <<  8)		/* Serial Clock Baud Rate */
+#define		AT91_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
+#define		AT91_SPI_DLYBCT		(0xff << 24)		/* Delay between Consecutive Transfers */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_ssc.h b/arch/arm/mach-at91/include/mach/at91_ssc.h
new file mode 100644
index 000000000000..a81114c11c74
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_ssc.h
@@ -0,0 +1,106 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_ssc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Serial Synchronous Controller (SSC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SSC_H
+#define AT91_SSC_H
+
+#define AT91_SSC_CR		0x00	/* Control Register */
+#define		AT91_SSC_RXEN		(1 <<  0)	/* Receive Enable */
+#define		AT91_SSC_RXDIS		(1 <<  1)	/* Receive Disable */
+#define		AT91_SSC_TXEN		(1 <<  8)	/* Transmit Enable */
+#define		AT91_SSC_TXDIS		(1 <<  9)	/* Transmit Disable */
+#define		AT91_SSC_SWRST		(1 << 15)	/* Software Reset */
+
+#define AT91_SSC_CMR		0x04	/* Clock Mode Register */
+#define		AT91_SSC_CMR_DIV	(0xfff << 0)	/* Clock Divider */
+
+#define AT91_SSC_RCMR		0x10	/* Receive Clock Mode Register */
+#define		AT91_SSC_CKS		(3    <<  0)	/* Clock Selection */
+#define			AT91_SSC_CKS_DIV		(0 << 0)
+#define			AT91_SSC_CKS_CLOCK		(1 << 0)
+#define			AT91_SSC_CKS_PIN		(2 << 0)
+#define		AT91_SSC_CKO		(7    <<  2)	/* Clock Output Mode Selection */
+#define			AT91_SSC_CKO_NONE		(0 << 2)
+#define			AT91_SSC_CKO_CONTINUOUS		(1 << 2)
+#define		AT91_SSC_CKI		(1    <<  5)	/* Clock Inversion */
+#define			AT91_SSC_CKI_FALLING		(0 << 5)
+#define			AT91_SSC_CK_RISING		(1 << 5)
+#define		AT91_SSC_CKG		(1    <<  6)	/* Receive Clock Gating Selection [AT91SAM9261 only] */
+#define			AT91_SSC_CKG_NONE		(0 << 6)
+#define			AT91_SSC_CKG_RFLOW		(1 << 6)
+#define			AT91_SSC_CKG_RFHIGH		(2 << 6)
+#define		AT91_SSC_START		(0xf  <<  8)	/* Start Selection */
+#define			AT91_SSC_START_CONTINUOUS	(0 << 8)
+#define			AT91_SSC_START_TX_RX		(1 << 8)
+#define			AT91_SSC_START_LOW_RF		(2 << 8)
+#define			AT91_SSC_START_HIGH_RF		(3 << 8)
+#define			AT91_SSC_START_FALLING_RF	(4 << 8)
+#define			AT91_SSC_START_RISING_RF	(5 << 8)
+#define			AT91_SSC_START_LEVEL_RF		(6 << 8)
+#define			AT91_SSC_START_EDGE_RF		(7 << 8)
+#define		AT91_SSC_STOP		(1    << 12)	/* Receive Stop Selection [AT91SAM9261 only] */
+#define		AT91_SSC_STTDLY		(0xff << 16)	/* Start Delay */
+#define		AT91_SSC_PERIOD		(0xff << 24)	/* Period Divider Selection */
+
+#define AT91_SSC_RFMR		0x14	/* Receive Frame Mode Register */
+#define		AT91_SSC_DATALEN	(0x1f <<  0)	/* Data Length */
+#define		AT91_SSC_LOOP		(1    <<  5)	/* Loop Mode */
+#define		AT91_SSC_MSBF		(1    <<  7)	/* Most Significant Bit First */
+#define		AT91_SSC_DATNB		(0xf  <<  8)	/* Data Number per Frame */
+#define		AT91_SSC_FSLEN		(0xf  << 16)	/* Frame Sync Length */
+#define		AT91_SSC_FSOS		(7    << 20)	/* Frame Sync Output Selection */
+#define			AT91_SSC_FSOS_NONE		(0 << 20)
+#define			AT91_SSC_FSOS_NEGATIVE		(1 << 20)
+#define			AT91_SSC_FSOS_POSITIVE		(2 << 20)
+#define			AT91_SSC_FSOS_LOW		(3 << 20)
+#define			AT91_SSC_FSOS_HIGH		(4 << 20)
+#define			AT91_SSC_FSOS_TOGGLE		(5 << 20)
+#define		AT91_SSC_FSEDGE		(1    << 24)	/* Frame Sync Edge Detection */
+#define			AT91_SSC_FSEDGE_POSITIVE	(0 << 24)
+#define			AT91_SSC_FSEDGE_NEGATIVE	(1 << 24)
+
+#define AT91_SSC_TCMR		0x18	/* Transmit Clock Mode Register */
+#define AT91_SSC_TFMR		0x1c	/* Transmit Fram Mode Register */
+#define		AT91_SSC_DATDEF		(1 <<  5)	/* Data Default Value */
+#define		AT91_SSC_FSDEN		(1 << 23)	/* Frame Sync Data Enable */
+
+#define AT91_SSC_RHR		0x20	/* Receive Holding Register */
+#define AT91_SSC_THR		0x24	/* Transmit Holding Register */
+#define AT91_SSC_RSHR		0x30	/* Receive Sync Holding Register */
+#define AT91_SSC_TSHR		0x34	/* Transmit Sync Holding Register */
+
+#define AT91_SSC_RC0R		0x38	/* Receive Compare 0 Register [AT91SAM9261 only] */
+#define AT91_SSC_RC1R		0x3c	/* Receive Compare 1 Register [AT91SAM9261 only] */
+
+#define AT91_SSC_SR		0x40	/* Status Register */
+#define		AT91_SSC_TXRDY		(1 <<  0)	/* Transmit Ready */
+#define		AT91_SSC_TXEMPTY	(1 <<  1)	/* Transmit Empty */
+#define		AT91_SSC_ENDTX		(1 <<  2)	/* End of Transmission */
+#define		AT91_SSC_TXBUFE		(1 <<  3)	/* Transmit Buffer Empty */
+#define		AT91_SSC_RXRDY		(1 <<  4)	/* Receive Ready */
+#define		AT91_SSC_OVRUN		(1 <<  5)	/* Receive Overrun */
+#define		AT91_SSC_ENDRX		(1 <<  6)	/* End of Reception */
+#define		AT91_SSC_RXBUFF		(1 <<  7)	/* Receive Buffer Full */
+#define		AT91_SSC_CP0		(1 <<  8)	/* Compare 0 [AT91SAM9261 only] */
+#define		AT91_SSC_CP1		(1 <<  9)	/* Compare 1 [AT91SAM9261 only] */
+#define		AT91_SSC_TXSYN		(1 << 10)	/* Transmit Sync */
+#define		AT91_SSC_RXSYN		(1 << 11)	/* Receive Sync */
+#define		AT91_SSC_TXENA		(1 << 16)	/* Transmit Enable */
+#define		AT91_SSC_RXENA		(1 << 17)	/* Receive Enable */
+
+#define AT91_SSC_IER		0x44	/* Interrupt Enable Register */
+#define AT91_SSC_IDR		0x48	/* Interrupt Disable Register */
+#define AT91_SSC_IMR		0x4c	/* Interrupt Mask Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_st.h b/arch/arm/mach-at91/include/mach/at91_st.h
new file mode 100644
index 000000000000..8847173e4101
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_st.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_st.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * System Timer (ST) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_ST_H
+#define AT91_ST_H
+
+#define	AT91_ST_CR		(AT91_ST + 0x00)	/* Control Register */
+#define 	AT91_ST_WDRST		(1 << 0)		/* Watchdog Timer Restart */
+
+#define	AT91_ST_PIMR		(AT91_ST + 0x04)	/* Period Interval Mode Register */
+#define		AT91_ST_PIV		(0xffff <<  0)		/* Period Interval Value */
+
+#define	AT91_ST_WDMR		(AT91_ST + 0x08)	/* Watchdog Mode Register */
+#define		AT91_ST_WDV		(0xffff <<  0)		/* Watchdog Counter Value */
+#define		AT91_ST_RSTEN		(1	<< 16)		/* Reset Enable */
+#define		AT91_ST_EXTEN		(1	<< 17)		/* External Signal Assertion Enable */
+
+#define	AT91_ST_RTMR		(AT91_ST + 0x0c)	/* Real-time Mode Register */
+#define		AT91_ST_RTPRES		(0xffff <<  0)		/* Real-time Prescalar Value */
+
+#define	AT91_ST_SR		(AT91_ST + 0x10)	/* Status Register */
+#define		AT91_ST_PITS		(1 << 0)		/* Period Interval Timer Status */
+#define		AT91_ST_WDOVF		(1 << 1) 		/* Watchdog Overflow */
+#define		AT91_ST_RTTINC		(1 << 2) 		/* Real-time Timer Increment */
+#define		AT91_ST_ALMS		(1 << 3) 		/* Alarm Status */
+
+#define	AT91_ST_IER		(AT91_ST + 0x14)	/* Interrupt Enable Register */
+#define	AT91_ST_IDR		(AT91_ST + 0x18)	/* Interrupt Disable Register */
+#define	AT91_ST_IMR		(AT91_ST + 0x1c)	/* Interrupt Mask Register */
+
+#define	AT91_ST_RTAR		(AT91_ST + 0x20)	/* Real-time Alarm Register */
+#define		AT91_ST_ALMV		(0xfffff << 0)		/* Alarm Value */
+
+#define	AT91_ST_CRTR		(AT91_ST + 0x24)	/* Current Real-time Register */
+#define		AT91_ST_CRTV		(0xfffff << 0)		/* Current Real-Time Value */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_tc.h b/arch/arm/mach-at91/include/mach/at91_tc.h
new file mode 100644
index 000000000000..46a317fd7164
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_tc.h
@@ -0,0 +1,146 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_tc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Timer/Counter Unit (TC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_TC_H
+#define AT91_TC_H
+
+#define AT91_TC_BCR		0xc0		/* TC Block Control Register */
+#define		AT91_TC_SYNC		(1 << 0)	/* Synchro Command */
+
+#define AT91_TC_BMR		0xc4		/* TC Block Mode Register */
+#define		AT91_TC_TC0XC0S		(3 << 0)	/* External Clock Signal 0 Selection */
+#define			AT91_TC_TC0XC0S_TCLK0		(0 << 0)
+#define			AT91_TC_TC0XC0S_NONE		(1 << 0)
+#define			AT91_TC_TC0XC0S_TIOA1		(2 << 0)
+#define			AT91_TC_TC0XC0S_TIOA2		(3 << 0)
+#define		AT91_TC_TC1XC1S		(3 << 2)	/* External Clock Signal 1 Selection */
+#define			AT91_TC_TC1XC1S_TCLK1		(0 << 2)
+#define			AT91_TC_TC1XC1S_NONE		(1 << 2)
+#define			AT91_TC_TC1XC1S_TIOA0		(2 << 2)
+#define			AT91_TC_TC1XC1S_TIOA2		(3 << 2)
+#define		AT91_TC_TC2XC2S		(3 << 4)	/* External Clock Signal 2 Selection */
+#define			AT91_TC_TC2XC2S_TCLK2		(0 << 4)
+#define			AT91_TC_TC2XC2S_NONE		(1 << 4)
+#define			AT91_TC_TC2XC2S_TIOA0		(2 << 4)
+#define			AT91_TC_TC2XC2S_TIOA1		(3 << 4)
+
+
+#define AT91_TC_CCR		0x00		/* Channel Control Register */
+#define		AT91_TC_CLKEN		(1 << 0)	/* Counter Clock Enable Command */
+#define		AT91_TC_CLKDIS		(1 << 1)	/* Counter CLock Disable Command */
+#define		AT91_TC_SWTRG		(1 << 2)	/* Software Trigger Command */
+
+#define AT91_TC_CMR		0x04		/* Channel Mode Register */
+#define		AT91_TC_TCCLKS		(7 << 0)	/* Capture/Waveform Mode: Clock Selection */
+#define			AT91_TC_TIMER_CLOCK1		(0 << 0)
+#define			AT91_TC_TIMER_CLOCK2		(1 << 0)
+#define			AT91_TC_TIMER_CLOCK3		(2 << 0)
+#define			AT91_TC_TIMER_CLOCK4		(3 << 0)
+#define			AT91_TC_TIMER_CLOCK5		(4 << 0)
+#define			AT91_TC_XC0			(5 << 0)
+#define			AT91_TC_XC1			(6 << 0)
+#define			AT91_TC_XC2			(7 << 0)
+#define		AT91_TC_CLKI		(1 << 3)	/* Capture/Waveform Mode: Clock Invert */
+#define		AT91_TC_BURST		(3 << 4)	/* Capture/Waveform Mode: Burst Signal Selection */
+#define		AT91_TC_LDBSTOP		(1 << 6)	/* Capture Mode: Counter Clock Stopped with TB Loading */
+#define		AT91_TC_LDBDIS		(1 << 7)	/* Capture Mode: Counter Clock Disable with RB Loading */
+#define		AT91_TC_ETRGEDG		(3 << 8)	/* Capture Mode: External Trigger Edge Selection */
+#define		AT91_TC_ABETRG		(1 << 10)	/* Capture Mode: TIOA or TIOB External Trigger Selection */
+#define		AT91_TC_CPCTRG		(1 << 14)	/* Capture Mode: RC Compare Trigger Enable */
+#define		AT91_TC_WAVE		(1 << 15)	/* Capture/Waveform mode */
+#define		AT91_TC_LDRA		(3 << 16)	/* Capture Mode: RA Loading Selection */
+#define		AT91_TC_LDRB		(3 << 18)	/* Capture Mode: RB Loading Selection */
+
+#define		AT91_TC_CPCSTOP		(1 <<  6)	/* Waveform Mode: Counter Clock Stopped with RC Compare */
+#define		AT91_TC_CPCDIS		(1 <<  7)	/* Waveform Mode: Counter Clock Disable with RC Compare */
+#define		AT91_TC_EEVTEDG		(3 <<  8)	/* Waveform Mode: External Event Edge Selection */
+#define			AT91_TC_EEVTEDG_NONE		(0 << 8)
+#define			AT91_TC_EEVTEDG_RISING		(1 << 8)
+#define			AT91_TC_EEVTEDG_FALLING		(2 << 8)
+#define			AT91_TC_EEVTEDG_BOTH		(3 << 8)
+#define		AT91_TC_EEVT		(3 << 10)	/* Waveform Mode: External Event Selection */
+#define			AT91_TC_EEVT_TIOB		(0 << 10)
+#define			AT91_TC_EEVT_XC0		(1 << 10)
+#define			AT91_TC_EEVT_XC1		(2 << 10)
+#define			AT91_TC_EEVT_XC2		(3 << 10)
+#define		AT91_TC_ENETRG		(1 << 12)	/* Waveform Mode: External Event Trigger Enable */
+#define		AT91_TC_WAVESEL		(3 << 13)	/* Waveform Mode: Waveform Selection */
+#define			AT91_TC_WAVESEL_UP		(0 << 13)
+#define			AT91_TC_WAVESEL_UP_AUTO		(2 << 13)
+#define			AT91_TC_WAVESEL_UPDOWN		(1 << 13)
+#define			AT91_TC_WAVESEL_UPDOWN_AUTO	(3 << 13)
+#define		AT91_TC_ACPA		(3 << 16)	/* Waveform Mode: RA Compare Effect on TIOA */
+#define			AT91_TC_ACPA_NONE		(0 << 16)
+#define			AT91_TC_ACPA_SET		(1 << 16)
+#define			AT91_TC_ACPA_CLEAR		(2 << 16)
+#define			AT91_TC_ACPA_TOGGLE		(3 << 16)
+#define		AT91_TC_ACPC		(3 << 18)	/* Waveform Mode: RC Compre Effect on TIOA */
+#define			AT91_TC_ACPC_NONE		(0 << 18)
+#define			AT91_TC_ACPC_SET		(1 << 18)
+#define			AT91_TC_ACPC_CLEAR		(2 << 18)
+#define			AT91_TC_ACPC_TOGGLE		(3 << 18)
+#define		AT91_TC_AEEVT		(3 << 20)	/* Waveform Mode: External Event Effect on TIOA */
+#define			AT91_TC_AEEVT_NONE		(0 << 20)
+#define			AT91_TC_AEEVT_SET		(1 << 20)
+#define			AT91_TC_AEEVT_CLEAR		(2 << 20)
+#define			AT91_TC_AEEVT_TOGGLE		(3 << 20)
+#define		AT91_TC_ASWTRG		(3 << 22)	/* Waveform Mode: Software Trigger Effect on TIOA */
+#define			AT91_TC_ASWTRG_NONE		(0 << 22)
+#define			AT91_TC_ASWTRG_SET		(1 << 22)
+#define			AT91_TC_ASWTRG_CLEAR		(2 << 22)
+#define			AT91_TC_ASWTRG_TOGGLE		(3 << 22)
+#define		AT91_TC_BCPB		(3 << 24)	/* Waveform Mode: RB Compare Effect on TIOB */
+#define			AT91_TC_BCPB_NONE		(0 << 24)
+#define			AT91_TC_BCPB_SET		(1 << 24)
+#define			AT91_TC_BCPB_CLEAR		(2 << 24)
+#define			AT91_TC_BCPB_TOGGLE		(3 << 24)
+#define		AT91_TC_BCPC		(3 << 26)	/* Waveform Mode: RC Compare Effect on TIOB */
+#define			AT91_TC_BCPC_NONE		(0 << 26)
+#define			AT91_TC_BCPC_SET		(1 << 26)
+#define			AT91_TC_BCPC_CLEAR		(2 << 26)
+#define			AT91_TC_BCPC_TOGGLE		(3 << 26)
+#define		AT91_TC_BEEVT		(3 << 28)	/* Waveform Mode: External Event Effect on TIOB */
+#define			AT91_TC_BEEVT_NONE		(0 << 28)
+#define			AT91_TC_BEEVT_SET		(1 << 28)
+#define			AT91_TC_BEEVT_CLEAR		(2 << 28)
+#define			AT91_TC_BEEVT_TOGGLE		(3 << 28)
+#define		AT91_TC_BSWTRG		(3 << 30)	/* Waveform Mode: Software Trigger Effect on TIOB */
+#define			AT91_TC_BSWTRG_NONE		(0 << 30)
+#define			AT91_TC_BSWTRG_SET		(1 << 30)
+#define			AT91_TC_BSWTRG_CLEAR		(2 << 30)
+#define			AT91_TC_BSWTRG_TOGGLE		(3 << 30)
+
+#define AT91_TC_CV		0x10		/* Counter Value */
+#define AT91_TC_RA		0x14		/* Register A */
+#define AT91_TC_RB		0x18		/* Register B */
+#define AT91_TC_RC		0x1c		/* Register C */
+
+#define AT91_TC_SR		0x20		/* Status Register */
+#define		AT91_TC_COVFS		(1 <<  0)	/* Counter Overflow Status */
+#define		AT91_TC_LOVRS		(1 <<  1)	/* Load Overrun Status */
+#define		AT91_TC_CPAS		(1 <<  2)	/* RA Compare Status */
+#define		AT91_TC_CPBS		(1 <<  3)	/* RB Compare Status */
+#define		AT91_TC_CPCS		(1 <<  4)	/* RC Compare Status */
+#define		AT91_TC_LDRAS		(1 <<  5)	/* RA Loading Status */
+#define		AT91_TC_LDRBS		(1 <<  6)	/* RB Loading Status */
+#define		AT91_TC_ETRGS		(1 <<  7)	/* External Trigger Status */
+#define		AT91_TC_CLKSTA		(1 << 16)	/* Clock Enabling Status */
+#define		AT91_TC_MTIOA		(1 << 17)	/* TIOA Mirror */
+#define		AT91_TC_MTIOB		(1 << 18)	/* TIOB Mirror */
+
+#define AT91_TC_IER		0x24		/* Interrupt Enable Register */
+#define AT91_TC_IDR		0x28		/* Interrupt Disable Register */
+#define AT91_TC_IMR		0x2c		/* Interrupt Mask Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91_twi.h b/arch/arm/mach-at91/include/mach/at91_twi.h
new file mode 100644
index 000000000000..bb2880f6ba37
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_twi.h
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_twi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Two-wire Interface (TWI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_TWI_H
+#define AT91_TWI_H
+
+#define	AT91_TWI_CR		0x00		/* Control Register */
+#define		AT91_TWI_START		(1 <<  0)	/* Send a Start Condition */
+#define		AT91_TWI_STOP		(1 <<  1)	/* Send a Stop Condition */
+#define		AT91_TWI_MSEN		(1 <<  2)	/* Master Transfer Enable */
+#define		AT91_TWI_MSDIS		(1 <<  3)	/* Master Transfer Disable */
+#define		AT91_TWI_SVEN		(1 <<  4)	/* Slave Transfer Enable [SAM9260 only] */
+#define		AT91_TWI_SVDIS		(1 <<  5)	/* Slave Transfer Disable [SAM9260 only] */
+#define		AT91_TWI_SWRST		(1 <<  7)	/* Software Reset */
+
+#define	AT91_TWI_MMR		0x04		/* Master Mode Register */
+#define		AT91_TWI_IADRSZ		(3    <<  8)	/* Internal Device Address Size */
+#define			AT91_TWI_IADRSZ_NO		(0 << 8)
+#define			AT91_TWI_IADRSZ_1		(1 << 8)
+#define			AT91_TWI_IADRSZ_2		(2 << 8)
+#define			AT91_TWI_IADRSZ_3		(3 << 8)
+#define		AT91_TWI_MREAD		(1    << 12)	/* Master Read Direction */
+#define		AT91_TWI_DADR		(0x7f << 16)	/* Device Address */
+
+#define	AT91_TWI_SMR		0x08		/* Slave Mode Register [SAM9260 only] */
+#define		AT91_TWI_SADR		(0x7f << 16)	/* Slave Address */
+
+#define	AT91_TWI_IADR		0x0c		/* Internal Address Register */
+
+#define	AT91_TWI_CWGR		0x10		/* Clock Waveform Generator Register */
+#define		AT91_TWI_CLDIV		(0xff <<  0)	/* Clock Low Divisor */
+#define		AT91_TWI_CHDIV		(0xff <<  8)	/* Clock High Divisor */
+#define		AT91_TWI_CKDIV		(7    << 16)	/* Clock Divider */
+
+#define	AT91_TWI_SR		0x20		/* Status Register */
+#define		AT91_TWI_TXCOMP		(1 <<  0)	/* Transmission Complete */
+#define		AT91_TWI_RXRDY		(1 <<  1)	/* Receive Holding Register Ready */
+#define		AT91_TWI_TXRDY		(1 <<  2)	/* Transmit Holding Register Ready */
+#define		AT91_TWI_SVREAD		(1 <<  3)	/* Slave Read [SAM9260 only] */
+#define		AT91_TWI_SVACC		(1 <<  4)	/* Slave Access [SAM9260 only] */
+#define		AT91_TWI_GACC		(1 <<  5)	/* General Call Access [SAM9260 only] */
+#define		AT91_TWI_OVRE		(1 <<  6)	/* Overrun Error [AT91RM9200 only] */
+#define		AT91_TWI_UNRE		(1 <<  7)	/* Underrun Error [AT91RM9200 only] */
+#define		AT91_TWI_NACK		(1 <<  8)	/* Not Acknowledged */
+#define		AT91_TWI_ARBLST		(1 <<  9)	/* Arbitration Lost [SAM9260 only] */
+#define		AT91_TWI_SCLWS		(1 << 10)	/* Clock Wait State [SAM9260 only] */
+#define		AT91_TWI_EOSACC		(1 << 11)	/* End of Slave Address [SAM9260 only] */
+
+#define	AT91_TWI_IER		0x24		/* Interrupt Enable Register */
+#define	AT91_TWI_IDR		0x28		/* Interrupt Disable Register */
+#define	AT91_TWI_IMR		0x2c		/* Interrupt Mask Register */
+#define	AT91_TWI_RHR		0x30		/* Receive Holding Register */
+#define	AT91_TWI_THR		0x34		/* Transmit Holding Register */
+
+#endif
+
diff --git a/arch/arm/mach-at91/include/mach/at91_wdt.h b/arch/arm/mach-at91/include/mach/at91_wdt.h
new file mode 100644
index 000000000000..973b4526a98e
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91_wdt.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91_wdt.h
+ *
+ * Watchdog Timer (WDT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_WDT_H
+#define AT91_WDT_H
+
+#define AT91_WDT_CR		(AT91_WDT + 0x00)	/* Watchdog Control Register */
+#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
+#define		AT91_WDT_KEY		(0xa5 << 24)		/* KEY Password */
+
+#define AT91_WDT_MR		(AT91_WDT + 0x04)	/* Watchdog Mode Register */
+#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
+#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
+#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
+#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
+#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
+#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
+#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
+#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
+
+#define AT91_WDT_SR		(AT91_WDT + 0x08)	/* Watchdog Status Register */
+#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
+#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
new file mode 100644
index 000000000000..4a4b64135a92
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -0,0 +1,126 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91cap9.h
+ *
+ *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ *  Copyright (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_H
+#define AT91CAP9_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91CAP9_ID_PIOABCD	2	/* Parallel IO Controller A, B, C and D */
+#define AT91CAP9_ID_MPB0	3	/* MP Block Peripheral 0 */
+#define AT91CAP9_ID_MPB1	4	/* MP Block Peripheral 1 */
+#define AT91CAP9_ID_MPB2	5	/* MP Block Peripheral 2 */
+#define AT91CAP9_ID_MPB3	6	/* MP Block Peripheral 3 */
+#define AT91CAP9_ID_MPB4	7	/* MP Block Peripheral 4 */
+#define AT91CAP9_ID_US0		8	/* USART 0 */
+#define AT91CAP9_ID_US1		9	/* USART 1 */
+#define AT91CAP9_ID_US2		10	/* USART 2 */
+#define AT91CAP9_ID_MCI0	11	/* Multimedia Card Interface 0 */
+#define AT91CAP9_ID_MCI1	12	/* Multimedia Card Interface 1 */
+#define AT91CAP9_ID_CAN		13	/* CAN */
+#define AT91CAP9_ID_TWI		14	/* Two-Wire Interface */
+#define AT91CAP9_ID_SPI0	15	/* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SPI1	16	/* Serial Peripheral Interface 0 */
+#define AT91CAP9_ID_SSC0	17	/* Serial Synchronous Controller 0 */
+#define AT91CAP9_ID_SSC1	18	/* Serial Synchronous Controller 1 */
+#define AT91CAP9_ID_AC97C	19	/* AC97 Controller */
+#define AT91CAP9_ID_TCB		20	/* Timer Counter 0, 1 and 2 */
+#define AT91CAP9_ID_PWMC	21	/* Pulse Width Modulation Controller */
+#define AT91CAP9_ID_EMAC	22	/* Ethernet */
+#define AT91CAP9_ID_AESTDES	23	/* Advanced Encryption Standard, Triple DES */
+#define AT91CAP9_ID_ADC		24	/* Analog-to-Digital Converter */
+#define AT91CAP9_ID_ISI		25	/* Image Sensor Interface */
+#define AT91CAP9_ID_LCDC	26	/* LCD Controller */
+#define AT91CAP9_ID_DMA		27	/* DMA Controller */
+#define AT91CAP9_ID_UDPHS	28	/* USB High Speed Device Port */
+#define AT91CAP9_ID_UHP		29	/* USB Host Port */
+#define AT91CAP9_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91CAP9_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91CAP9_BASE_UDPHS		0xfff78000
+#define AT91CAP9_BASE_TCB0		0xfff7c000
+#define AT91CAP9_BASE_TC0		0xfff7c000
+#define AT91CAP9_BASE_TC1		0xfff7c040
+#define AT91CAP9_BASE_TC2		0xfff7c080
+#define AT91CAP9_BASE_MCI0		0xfff80000
+#define AT91CAP9_BASE_MCI1		0xfff84000
+#define AT91CAP9_BASE_TWI		0xfff88000
+#define AT91CAP9_BASE_US0		0xfff8c000
+#define AT91CAP9_BASE_US1		0xfff90000
+#define AT91CAP9_BASE_US2		0xfff94000
+#define AT91CAP9_BASE_SSC0		0xfff98000
+#define AT91CAP9_BASE_SSC1		0xfff9c000
+#define AT91CAP9_BASE_AC97C		0xfffa0000
+#define AT91CAP9_BASE_SPI0		0xfffa4000
+#define AT91CAP9_BASE_SPI1		0xfffa8000
+#define AT91CAP9_BASE_CAN		0xfffac000
+#define AT91CAP9_BASE_PWMC		0xfffb8000
+#define AT91CAP9_BASE_EMAC		0xfffbc000
+#define AT91CAP9_BASE_ADC		0xfffc0000
+#define AT91CAP9_BASE_ISI		0xfffc4000
+#define AT91_BASE_SYS			0xffffe200
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_BCRAMC	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_DDRSDRC	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffeb10 - AT91_BASE_SYS)
+#define AT91_DMA	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91CAP9_BASE_US0
+#define AT91_USART1	AT91CAP9_BASE_US1
+#define AT91_USART2	AT91CAP9_BASE_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91CAP9_SRAM_BASE	0x00100000	/* Internal SRAM base address */
+#define AT91CAP9_SRAM_SIZE	(32 * SZ_1K)	/* Internal SRAM size (32Kb) */
+
+#define AT91CAP9_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91CAP9_ROM_SIZE	(32 * SZ_1K)	/* Internal ROM size (32Kb) */
+
+#define AT91CAP9_LCDC_BASE	0x00500000	/* LCD Controller */
+#define AT91CAP9_UDPHS_FIFO	0x00600000	/* USB High Speed Device Port */
+#define AT91CAP9_UHP_BASE	0x00700000	/* USB Host controller */
+
+#define CONFIG_DRAM_BASE	AT91_CHIPSELECT_6
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
new file mode 100644
index 000000000000..bca878f3bd87
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+ *
+ * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
+ * Based on AT91CAP9 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_DDRSDR_H
+#define AT91CAP9_DDRSDR_H
+
+#define AT91_DDRSDRC_MR		(AT91_DDRSDRC + 0x00)	/* Mode Register */
+#define		AT91_DDRSDRC_MODE	(0xf << 0)		/* Command Mode */
+#define			AT91_DDRSDRC_MODE_NORMAL		0
+#define			AT91_DDRSDRC_MODE_NOP		1
+#define			AT91_DDRSDRC_MODE_PRECHARGE	2
+#define			AT91_DDRSDRC_MODE_LMR		3
+#define			AT91_DDRSDRC_MODE_REFRESH	4
+#define			AT91_DDRSDRC_MODE_EXT_LMR	5
+#define			AT91_DDRSDRC_MODE_DEEP		6
+
+#define AT91_DDRSDRC_RTR	(AT91_DDRSDRC + 0x04)	/* Refresh Timer Register */
+#define		AT91_DDRSDRC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
+
+#define AT91_DDRSDRC_CR		(AT91_DDRSDRC + 0x08)	/* Configuration Register */
+#define		AT91_DDRSDRC_NC		(3 << 0)		/* Number of Column Bits */
+#define			AT91_DDRSDRC_NC_SDR8	(0 << 0)
+#define			AT91_DDRSDRC_NC_SDR9	(1 << 0)
+#define			AT91_DDRSDRC_NC_SDR10	(2 << 0)
+#define			AT91_DDRSDRC_NC_SDR11	(3 << 0)
+#define			AT91_DDRSDRC_NC_DDR9	(0 << 0)
+#define			AT91_DDRSDRC_NC_DDR10	(1 << 0)
+#define			AT91_DDRSDRC_NC_DDR11	(2 << 0)
+#define			AT91_DDRSDRC_NC_DDR12	(3 << 0)
+#define		AT91_DDRSDRC_NR		(3 << 2)		/* Number of Row Bits */
+#define			AT91_DDRSDRC_NR_11	(0 << 2)
+#define			AT91_DDRSDRC_NR_12	(1 << 2)
+#define			AT91_DDRSDRC_NR_13	(2 << 2)
+#define		AT91_DDRSDRC_CAS	(7 << 4)		/* CAS Latency */
+#define			AT91_DDRSDRC_CAS_2	(2 << 4)
+#define			AT91_DDRSDRC_CAS_3	(3 << 4)
+#define			AT91_DDRSDRC_CAS_25	(6 << 4)
+#define		AT91_DDRSDRC_DLL	(1 << 7)		/* Reset DLL */
+#define		AT91_DDRSDRC_DICDS	(1 << 8)		/* Output impedance control */
+
+#define AT91_DDRSDRC_T0PR	(AT91_DDRSDRC + 0x0C)	/* Timing 0 Register */
+#define		AT91_DDRSDRC_TRAS	(0xf <<  0)		/* Active to Precharge delay */
+#define		AT91_DDRSDRC_TRCD	(0xf <<  4)		/* Row to Column delay */
+#define		AT91_DDRSDRC_TWR	(0xf <<  8)		/* Write recovery delay */
+#define		AT91_DDRSDRC_TRC	(0xf << 12)		/* Row cycle delay */
+#define		AT91_DDRSDRC_TRP	(0xf << 16)		/* Row precharge delay */
+#define		AT91_DDRSDRC_TRRD	(0xf << 20)		/* Active BankA to BankB */
+#define		AT91_DDRSDRC_TWTR	(1   << 24)		/* Internal Write to Read delay */
+#define		AT91_DDRSDRC_TMRD	(0xf << 28)		/* Load mode to active/refresh delay */
+
+#define AT91_DDRSDRC_T1PR	(AT91_DDRSDRC + 0x10)	/* Timing 1 Register */
+#define		AT91_DDRSDRC_TRFC	(0x1f << 0)		/* Row Cycle Delay */
+#define		AT91_DDRSDRC_TXSNR	(0xff << 8)		/* Exit self-refresh to non-read */
+#define		AT91_DDRSDRC_TXSRD	(0xff << 16)		/* Exit self-refresh to read */
+#define		AT91_DDRSDRC_TXP	(0xf  << 24)		/* Exit power-down delay */
+
+#define AT91_DDRSDRC_LPR	(AT91_DDRSDRC + 0x18)	/* Low Power Register */
+#define		AT91_DDRSDRC_LPCB		(3 << 0)	/* Low-power Configurations */
+#define			AT91_DDRSDRC_LPCB_DISABLE		0
+#define			AT91_DDRSDRC_LPCB_SELF_REFRESH		1
+#define			AT91_DDRSDRC_LPCB_POWER_DOWN		2
+#define			AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN	3
+#define		AT91_DDRSDRC_CLKFR		(1 << 2)	/* Clock Frozen */
+#define		AT91_DDRSDRC_PASR		(7 << 4)	/* Partial Array Self Refresh */
+#define		AT91_DDRSDRC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
+#define		AT91_DDRSDRC_DS			(3 << 10)	/* Drive Strength */
+#define		AT91_DDRSDRC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
+#define			AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
+#define			AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
+#define			AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
+
+#define AT91_DDRSDRC_MDR	(AT91_DDRSDRC + 0x1C)	/* Memory Device Register */
+#define		AT91_DDRSDRC_MD		(3 << 0)		/* Memory Device Type */
+#define			AT91_DDRSDRC_MD_SDR		0
+#define			AT91_DDRSDRC_MD_LOW_POWER_SDR	1
+#define			AT91_DDRSDRC_MD_DDR		2
+#define			AT91_DDRSDRC_MD_LOW_POWER_DDR	3
+
+#define AT91_DDRSDRC_DLLR	(AT91_DDRSDRC + 0x20)	/* DLL Information Register */
+#define		AT91_DDRSDRC_MDINC	(1 << 0)		/* Master Delay increment */
+#define		AT91_DDRSDRC_MDDEC	(1 << 1)		/* Master Delay decrement */
+#define		AT91_DDRSDRC_MDOVF	(1 << 2)		/* Master Delay Overflow */
+#define		AT91_DDRSDRC_SDCOVF	(1 << 3)		/* Slave Delay Correction Overflow */
+#define		AT91_DDRSDRC_SDCUDF	(1 << 4)		/* Slave Delay Correction Underflow */
+#define		AT91_DDRSDRC_SDERF	(1 << 5)		/* Slave Delay Correction error */
+#define		AT91_DDRSDRC_MDVAL	(0xff <<  8)		/* Master Delay value */
+#define		AT91_DDRSDRC_SDVAL	(0xff << 16)		/* Slave Delay value */
+#define		AT91_DDRSDRC_SDCVAL	(0xff << 24)		/* Slave Delay Correction value */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_matrix.h b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
new file mode 100644
index 000000000000..4b9d4aff4b4f
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91cap9_matrix.h
@@ -0,0 +1,137 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91cap9_matrix.h
+ *
+ *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
+ *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
+ *  Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91CAP9 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91CAP9_MATRIX_H
+#define AT91CAP9_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define AT91_MATRIX_MCFG9	(AT91_MATRIX + 0x24)	/* Master Configuration Register 9 */
+#define AT91_MATRIX_MCFG10	(AT91_MATRIX + 0x28)	/* Master Configuration Register 10 */
+#define AT91_MATRIX_MCFG11	(AT91_MATRIX + 0x2C)	/* Master Configuration Register 11 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define AT91_MATRIX_SCFG8	(AT91_MATRIX + 0x60)	/* Slave Configuration Register 8 */
+#define AT91_MATRIX_SCFG9	(AT91_MATRIX + 0x64)	/* Slave Configuration Register 9 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define AT91_MATRIX_PRAS8	(AT91_MATRIX + 0xC0)	/* Priority Register A for Slave 8 */
+#define AT91_MATRIX_PRBS8	(AT91_MATRIX + 0xC4)	/* Priority Register B for Slave 8 */
+#define AT91_MATRIX_PRAS9	(AT91_MATRIX + 0xC8)	/* Priority Register A for Slave 9 */
+#define AT91_MATRIX_PRBS9	(AT91_MATRIX + 0xCC)	/* Priority Register B for Slave 9 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+#define		AT91_MATRIX_M9PR		(3 << 4)	/* Master 9 Priority (in Register B) */
+#define		AT91_MATRIX_M10PR		(3 << 8)	/* Master 10 Priority (in Register B) */
+#define		AT91_MATRIX_M11PR		(3 << 12)	/* Master 11 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+#define		AT91_MATRIX_RCB9		(1 << 9)
+#define		AT91_MATRIX_RCB10		(1 << 10)
+#define		AT91_MATRIX_RCB11		(1 << 11)
+
+#define AT91_MPBS0_SFR		(AT91_MATRIX + 0x114)	/* MPBlock Slave 0 Special Function Register */
+#define AT91_MPBS1_SFR		(AT91_MATRIX + 0x11C)	/* MPBlock Slave 1 Special Function Register */
+
+#define AT91_MATRIX_UDPHS	(AT91_MATRIX + 0x118)	/* USBHS Special Function Register [AT91CAP9 only] */
+#define		AT91_MATRIX_SELECT_UDPHS	(0 << 31)	/* select High Speed UDP */
+#define		AT91_MATRIX_SELECT_UDP		(1 << 31)	/* select standard UDP */
+#define		AT91_MATRIX_UDPHS_BYPASS_LOCK	(1 << 30)	/* bypass lock bit */
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI_CS1A_BCRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI_CS4A_SMC_CF1		(1 << 4)
+#define		AT91_MATRIX_EBI_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI_CS5A_SMC_CF2		(1 << 5)
+#define		AT91_MATRIX_EBI_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI_DQSPDC		(1 << 9)	/* Data Qualifier Strobe Pull-Down Configuration */
+#define		AT91_MATRIX_EBI_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI_VDDIOMSEL_3_3V		(1 << 16)
+
+#define AT91_MPBS2_SFR		(AT91_MATRIX + 0x12C)	/* MPBlock Slave 2 Special Function Register */
+#define AT91_MPBS3_SFR		(AT91_MATRIX + 0x130)	/* MPBlock Slave 3 Special Function Register */
+#define AT91_APB_SFR		(AT91_MATRIX + 0x134)	/* APB Bridge Special Function Register */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h
new file mode 100644
index 000000000000..78983155a074
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91rm9200.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91rm9200.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_H
+#define AT91RM9200_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripheral */
+#define AT91RM9200_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91RM9200_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91RM9200_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91RM9200_ID_PIOD	5	/* Parallel IO Controller D */
+#define AT91RM9200_ID_US0	6	/* USART 0 */
+#define AT91RM9200_ID_US1	7	/* USART 1 */
+#define AT91RM9200_ID_US2	8	/* USART 2 */
+#define AT91RM9200_ID_US3	9	/* USART 3 */
+#define AT91RM9200_ID_MCI	10	/* Multimedia Card Interface */
+#define AT91RM9200_ID_UDP	11	/* USB Device Port */
+#define AT91RM9200_ID_TWI	12	/* Two-Wire Interface */
+#define AT91RM9200_ID_SPI	13	/* Serial Peripheral Interface */
+#define AT91RM9200_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT91RM9200_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT91RM9200_ID_SSC2	16	/* Serial Synchronous Controller 2 */
+#define AT91RM9200_ID_TC0	17	/* Timer Counter 0 */
+#define AT91RM9200_ID_TC1	18	/* Timer Counter 1 */
+#define AT91RM9200_ID_TC2	19	/* Timer Counter 2 */
+#define AT91RM9200_ID_TC3	20	/* Timer Counter 3 */
+#define AT91RM9200_ID_TC4	21	/* Timer Counter 4 */
+#define AT91RM9200_ID_TC5	22	/* Timer Counter 5 */
+#define AT91RM9200_ID_UHP	23	/* USB Host port */
+#define AT91RM9200_ID_EMAC	24	/* Ethernet MAC */
+#define AT91RM9200_ID_IRQ0	25	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91RM9200_ID_IRQ1	26	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91RM9200_ID_IRQ2	27	/* Advanced Interrupt Controller (IRQ2) */
+#define AT91RM9200_ID_IRQ3	28	/* Advanced Interrupt Controller (IRQ3) */
+#define AT91RM9200_ID_IRQ4	29	/* Advanced Interrupt Controller (IRQ4) */
+#define AT91RM9200_ID_IRQ5	30	/* Advanced Interrupt Controller (IRQ5) */
+#define AT91RM9200_ID_IRQ6	31	/* Advanced Interrupt Controller (IRQ6) */
+
+
+/*
+ * Peripheral physical base addresses.
+ */
+#define AT91RM9200_BASE_TCB0	0xfffa0000
+#define AT91RM9200_BASE_TC0	0xfffa0000
+#define AT91RM9200_BASE_TC1	0xfffa0040
+#define AT91RM9200_BASE_TC2	0xfffa0080
+#define AT91RM9200_BASE_TCB1	0xfffa4000
+#define AT91RM9200_BASE_TC3	0xfffa4000
+#define AT91RM9200_BASE_TC4	0xfffa4040
+#define AT91RM9200_BASE_TC5	0xfffa4080
+#define AT91RM9200_BASE_UDP	0xfffb0000
+#define AT91RM9200_BASE_MCI	0xfffb4000
+#define AT91RM9200_BASE_TWI	0xfffb8000
+#define AT91RM9200_BASE_EMAC	0xfffbc000
+#define AT91RM9200_BASE_US0	0xfffc0000
+#define AT91RM9200_BASE_US1	0xfffc4000
+#define AT91RM9200_BASE_US2	0xfffc8000
+#define AT91RM9200_BASE_US3	0xfffcc000
+#define AT91RM9200_BASE_SSC0	0xfffd0000
+#define AT91RM9200_BASE_SSC1	0xfffd4000
+#define AT91RM9200_BASE_SSC2	0xfffd8000
+#define AT91RM9200_BASE_SPI	0xfffe0000
+#define AT91_BASE_SYS		0xfffff000
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)	/* Debug Unit */
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)	/* PIO Controller A */
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)	/* PIO Controller B */
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)	/* PIO Controller C */
+#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)	/* PIO Controller D */
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)	/* Power Management Controller */
+#define AT91_ST		(0xfffffd00 - AT91_BASE_SYS)	/* System Timer */
+#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)	/* Real-Time Clock */
+#define AT91_MC		(0xffffff00 - AT91_BASE_SYS)	/* Memory Controllers */
+
+#define AT91_USART0	AT91RM9200_BASE_US0
+#define AT91_USART1	AT91RM9200_BASE_US1
+#define AT91_USART2	AT91RM9200_BASE_US2
+#define AT91_USART3	AT91RM9200_BASE_US3
+
+#define AT91_MATRIX	0	/* not supported */
+
+/*
+ * Internal Memory.
+ */
+#define AT91RM9200_ROM_BASE	0x00100000	/* Internal ROM base address */
+#define AT91RM9200_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
+
+#define AT91RM9200_SRAM_BASE	0x00200000	/* Internal SRAM base address */
+#define AT91RM9200_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
+
+#define AT91RM9200_UHP_BASE	0x00300000	/* USB Host controller */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_emac.h b/arch/arm/mach-at91/include/mach/at91rm9200_emac.h
new file mode 100644
index 000000000000..b8260cd8041c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91rm9200_emac.h
@@ -0,0 +1,138 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91rm9200_emac.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Ethernet MAC registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_EMAC_H
+#define AT91RM9200_EMAC_H
+
+#define	AT91_EMAC_CTL		0x00	/* Control Register */
+#define		AT91_EMAC_LB		(1 <<  0)	/* Loopback */
+#define		AT91_EMAC_LBL		(1 <<  1)	/* Loopback Local */
+#define		AT91_EMAC_RE		(1 <<  2)	/* Receive Enable */
+#define		AT91_EMAC_TE		(1 <<  3)	/* Transmit Enable */
+#define		AT91_EMAC_MPE		(1 <<  4)	/* Management Port Enable */
+#define		AT91_EMAC_CSR		(1 <<  5)	/* Clear Statistics Registers */
+#define		AT91_EMAC_INCSTAT	(1 <<  6)	/* Increment Statistics Registers */
+#define		AT91_EMAC_WES		(1 <<  7)	/* Write Enable for Statistics Registers */
+#define		AT91_EMAC_BP		(1 <<  8)	/* Back Pressure */
+
+#define	AT91_EMAC_CFG		0x04	/* Configuration Register */
+#define		AT91_EMAC_SPD		(1 <<  0)	/* Speed */
+#define		AT91_EMAC_FD		(1 <<  1)	/* Full Duplex */
+#define		AT91_EMAC_BR		(1 <<  2)	/* Bit Rate */
+#define		AT91_EMAC_CAF		(1 <<  4)	/* Copy All Frames */
+#define		AT91_EMAC_NBC		(1 <<  5)	/* No Broadcast */
+#define		AT91_EMAC_MTI		(1 <<  6)	/* Multicast Hash Enable */
+#define		AT91_EMAC_UNI		(1 <<  7)	/* Unicast Hash Enable */
+#define		AT91_EMAC_BIG		(1 <<  8)	/* Receive 1522 Bytes */
+#define		AT91_EMAC_EAE		(1 <<  9)	/* External Address Match Enable */
+#define		AT91_EMAC_CLK		(3 << 10)	/* MDC Clock Divisor */
+#define		AT91_EMAC_CLK_DIV8		(0 << 10)
+#define		AT91_EMAC_CLK_DIV16		(1 << 10)
+#define		AT91_EMAC_CLK_DIV32		(2 << 10)
+#define		AT91_EMAC_CLK_DIV64		(3 << 10)
+#define		AT91_EMAC_RTY		(1 << 12)	/* Retry Test */
+#define		AT91_EMAC_RMII		(1 << 13)	/* Reduce MII (RMII) */
+
+#define	AT91_EMAC_SR		0x08	/* Status Register */
+#define		AT91_EMAC_SR_LINK	(1 <<  0)	/* Link */
+#define		AT91_EMAC_SR_MDIO	(1 <<  1)	/* MDIO pin */
+#define		AT91_EMAC_SR_IDLE	(1 <<  2)	/* PHY idle */
+
+#define	AT91_EMAC_TAR		0x0c	/* Transmit Address Register */
+
+#define	AT91_EMAC_TCR		0x10	/* Transmit Control Register */
+#define		AT91_EMAC_LEN		(0x7ff << 0)	/* Transmit Frame Length */
+#define		AT91_EMAC_NCRC		(1     << 15)	/* No CRC */
+
+#define	AT91_EMAC_TSR		0x14	/* Transmit Status Register */
+#define		AT91_EMAC_TSR_OVR	(1 <<  0)	/* Transmit Buffer Overrun */
+#define		AT91_EMAC_TSR_COL	(1 <<  1)	/* Collision Occurred */
+#define		AT91_EMAC_TSR_RLE	(1 <<  2)	/* Retry Limit Exceeded */
+#define		AT91_EMAC_TSR_IDLE	(1 <<  3)	/* Transmitter Idle */
+#define		AT91_EMAC_TSR_BNQ	(1 <<  4)	/* Transmit Buffer not Queued */
+#define		AT91_EMAC_TSR_COMP	(1 <<  5)	/* Transmit Complete */
+#define		AT91_EMAC_TSR_UND	(1 <<  6)	/* Transmit Underrun */
+
+#define	AT91_EMAC_RBQP		0x18	/* Receive Buffer Queue Pointer */
+
+#define	AT91_EMAC_RSR		0x20	/* Receive Status Register */
+#define		AT91_EMAC_RSR_BNA	(1 <<  0)	/* Buffer Not Available */
+#define		AT91_EMAC_RSR_REC	(1 <<  1)	/* Frame Received */
+#define		AT91_EMAC_RSR_OVR	(1 <<  2)	/* RX Overrun */
+
+#define	AT91_EMAC_ISR		0x24	/* Interrupt Status Register */
+#define		AT91_EMAC_DONE		(1 <<  0)	/* Management Done */
+#define		AT91_EMAC_RCOM		(1 <<  1)	/* Receive Complete */
+#define		AT91_EMAC_RBNA		(1 <<  2)	/* Receive Buffer Not Available */
+#define		AT91_EMAC_TOVR		(1 <<  3)	/* Transmit Buffer Overrun */
+#define		AT91_EMAC_TUND		(1 <<  4)	/* Transmit Buffer Underrun */
+#define		AT91_EMAC_RTRY		(1 <<  5)	/* Retry Limit */
+#define		AT91_EMAC_TBRE		(1 <<  6)	/* Transmit Buffer Register Empty */
+#define		AT91_EMAC_TCOM		(1 <<  7)	/* Transmit Complete */
+#define		AT91_EMAC_TIDLE		(1 <<  8)	/* Transmit Idle */
+#define		AT91_EMAC_LINK		(1 <<  9)	/* Link */
+#define		AT91_EMAC_ROVR		(1 << 10)	/* RX Overrun */
+#define		AT91_EMAC_ABT		(1 << 11)	/* Abort */
+
+#define	AT91_EMAC_IER		0x28	/* Interrupt Enable Register */
+#define	AT91_EMAC_IDR		0x2c	/* Interrupt Disable Register */
+#define	AT91_EMAC_IMR		0x30	/* Interrupt Mask Register */
+
+#define	AT91_EMAC_MAN		0x34	/* PHY Maintenance Register */
+#define		AT91_EMAC_DATA		(0xffff << 0)	/* MDIO Data */
+#define		AT91_EMAC_REGA		(0x1f	<< 18)	/* MDIO Register */
+#define		AT91_EMAC_PHYA		(0x1f	<< 23)	/* MDIO PHY Address */
+#define		AT91_EMAC_RW		(3	<< 28)	/* Read/Write operation */
+#define			AT91_EMAC_RW_W		(1 << 28)
+#define			AT91_EMAC_RW_R		(2 << 28)
+#define		AT91_EMAC_MAN_802_3	0x40020000	/* IEEE 802.3 value */
+
+/*
+ * Statistics Registers.
+ */
+#define AT91_EMAC_FRA		0x40	/* Frames Transmitted OK */
+#define AT91_EMAC_SCOL		0x44	/* Single Collision Frame */
+#define AT91_EMAC_MCOL		0x48	/* Multiple Collision Frame */
+#define AT91_EMAC_OK		0x4c	/* Frames Received OK */
+#define AT91_EMAC_SEQE		0x50	/* Frame Check Sequence Error */
+#define AT91_EMAC_ALE		0x54	/* Alignmemt Error */
+#define AT91_EMAC_DTE		0x58	/* Deffered Transmission Frame */
+#define AT91_EMAC_LCOL		0x5c	/* Late Collision */
+#define AT91_EMAC_ECOL		0x60	/* Excessive Collision */
+#define AT91_EMAC_TUE		0x64	/* Transmit Underrun Error */
+#define AT91_EMAC_CSE		0x68	/* Carrier Sense Error */
+#define AT91_EMAC_DRFC		0x6c	/* Discard RX Frame */
+#define AT91_EMAC_ROV		0x70	/* Receive Overrun */
+#define AT91_EMAC_CDE		0x74	/* Code Error */
+#define AT91_EMAC_ELR		0x78	/* Excessive Length Error */
+#define AT91_EMAC_RJB		0x7c	/* Receive Jabber */
+#define AT91_EMAC_USF		0x80	/* Undersize Frame */
+#define AT91_EMAC_SQEE		0x84	/* SQE Test Error */
+
+/*
+ * Address Registers.
+ */
+#define AT91_EMAC_HSL		0x90	/* Hash Address Low [31:0] */
+#define AT91_EMAC_HSH		0x94	/* Hash Address High [63:32] */
+#define AT91_EMAC_SA1L		0x98	/* Specific Address 1 Low, bytes 0-3 */
+#define AT91_EMAC_SA1H		0x9c	/* Specific Address 1 High, bytes 4-5 */
+#define AT91_EMAC_SA2L		0xa0	/* Specific Address 2 Low, bytes 0-3 */
+#define AT91_EMAC_SA2H		0xa4	/* Specific Address 2 High, bytes 4-5 */
+#define AT91_EMAC_SA3L		0xa8	/* Specific Address 3 Low, bytes 0-3 */
+#define AT91_EMAC_SA3H		0xac	/* Specific Address 3 High, bytes 4-5 */
+#define AT91_EMAC_SA4L		0xb0	/* Specific Address 4 Low, bytes 0-3 */
+#define AT91_EMAC_SA4H		0xb4	/* Specific Address 4 High, bytes 4-5 */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91rm9200_mc.h b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
new file mode 100644
index 000000000000..d34e4ed89349
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91rm9200_mc.h
@@ -0,0 +1,160 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91rm9200_mc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_MC_H
+#define AT91RM9200_MC_H
+
+/* Memory Controller */
+#define AT91_MC_RCR		(AT91_MC + 0x00)	/* MC Remap Control Register */
+#define		AT91_MC_RCB		(1 <<  0)		/* Remap Command Bit */
+
+#define AT91_MC_ASR		(AT91_MC + 0x04)	/* MC Abort Status Register */
+#define		AT91_MC_UNADD		(1 <<  0)		/* Undefined Address Abort Status */
+#define		AT91_MC_MISADD		(1 <<  1)		/* Misaligned Address Abort Status */
+#define		AT91_MC_ABTSZ		(3 <<  8)		/* Abort Size Status */
+#define			AT91_MC_ABTSZ_BYTE		(0 << 8)
+#define			AT91_MC_ABTSZ_HALFWORD		(1 << 8)
+#define			AT91_MC_ABTSZ_WORD		(2 << 8)
+#define		AT91_MC_ABTTYP		(3 << 10)		/* Abort Type Status */
+#define			AT91_MC_ABTTYP_DATAREAD		(0 << 10)
+#define			AT91_MC_ABTTYP_DATAWRITE	(1 << 10)
+#define			AT91_MC_ABTTYP_FETCH		(2 << 10)
+#define		AT91_MC_MST0		(1 << 16)		/* ARM920T Abort Source */
+#define		AT91_MC_MST1		(1 << 17)		/* PDC Abort Source */
+#define		AT91_MC_MST2		(1 << 18)		/* UHP Abort Source */
+#define		AT91_MC_MST3		(1 << 19)		/* EMAC Abort Source */
+#define		AT91_MC_SVMST0		(1 << 24)		/* Saved ARM920T Abort Source */
+#define		AT91_MC_SVMST1		(1 << 25)		/* Saved PDC Abort Source */
+#define		AT91_MC_SVMST2		(1 << 26)		/* Saved UHP Abort Source */
+#define		AT91_MC_SVMST3		(1 << 27)		/* Saved EMAC Abort Source */
+
+#define AT91_MC_AASR		(AT91_MC + 0x08)	/* MC Abort Address Status Register */
+
+#define AT91_MC_MPR		(AT91_MC + 0x0c)	/* MC Master Priority Register */
+#define		AT91_MPR_MSTP0		(7 <<  0)		/* ARM920T Priority */
+#define		AT91_MPR_MSTP1		(7 <<  4)		/* PDC Priority */
+#define		AT91_MPR_MSTP2		(7 <<  8)		/* UHP Priority */
+#define		AT91_MPR_MSTP3		(7 << 12)		/* EMAC Priority */
+
+/* External Bus Interface (EBI) registers */
+#define AT91_EBI_CSA		(AT91_MC + 0x60)	/* Chip Select Assignment Register */
+#define		AT91_EBI_CS0A		(1 << 0)		/* Chip Select 0 Assignment */
+#define			AT91_EBI_CS0A_SMC		(0 << 0)
+#define			AT91_EBI_CS0A_BFC		(1 << 0)
+#define		AT91_EBI_CS1A		(1 << 1)		/* Chip Select 1 Assignment */
+#define			AT91_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_EBI_CS1A_SDRAMC		(1 << 1)
+#define		AT91_EBI_CS3A		(1 << 3)		/* Chip Select 2 Assignment */
+#define			AT91_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_EBI_CS4A		(1 << 4)		/* Chip Select 3 Assignment */
+#define			AT91_EBI_CS4A_SMC		(0 << 4)
+#define			AT91_EBI_CS4A_SMC_COMPACTFLASH	(1 << 4)
+#define AT91_EBI_CFGR		(AT91_MC + 0x64)	/* Configuration Register */
+#define		AT91_EBI_DBPUC		(1 << 0)		/* Data Bus Pull-Up Configuration */
+
+/* Static Memory Controller (SMC) registers */
+#define	AT91_SMC_CSR(n)		(AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
+#define		AT91_SMC_NWS		(0x7f <<  0)		/* Number of Wait States */
+#define			AT91_SMC_NWS_(x)	((x) << 0)
+#define		AT91_SMC_WSEN		(1    <<  7)		/* Wait State Enable */
+#define		AT91_SMC_TDF		(0xf  <<  8)		/* Data Float Time */
+#define			AT91_SMC_TDF_(x)	((x) << 8)
+#define		AT91_SMC_BAT		(1    << 12)		/* Byte Access Type */
+#define		AT91_SMC_DBW		(3    << 13)		/* Data Bus Width */
+#define			AT91_SMC_DBW_16		(1 << 13)
+#define			AT91_SMC_DBW_8		(2 << 13)
+#define		AT91_SMC_DPR		(1 << 15)		/* Data Read Protocol */
+#define		AT91_SMC_ACSS		(3 << 16)		/* Address to Chip Select Setup */
+#define			AT91_SMC_ACSS_STD	(0 << 16)
+#define			AT91_SMC_ACSS_1		(1 << 16)
+#define			AT91_SMC_ACSS_2		(2 << 16)
+#define			AT91_SMC_ACSS_3		(3 << 16)
+#define		AT91_SMC_RWSETUP	(7 << 24)		/* Read & Write Signal Time Setup */
+#define			AT91_SMC_RWSETUP_(x)	((x) << 24)
+#define		AT91_SMC_RWHOLD		(7 << 28)		/* Read & Write Signal Hold Time */
+#define			AT91_SMC_RWHOLD_(x)	((x) << 28)
+
+/* SDRAM Controller registers */
+#define AT91_SDRAMC_MR		(AT91_MC + 0x90)	/* Mode Register */
+#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
+#define			AT91_SDRAMC_MODE_NORMAL		(0 << 0)
+#define			AT91_SDRAMC_MODE_NOP		(1 << 0)
+#define			AT91_SDRAMC_MODE_PRECHARGE	(2 << 0)
+#define			AT91_SDRAMC_MODE_LMR		(3 << 0)
+#define			AT91_SDRAMC_MODE_REFRESH	(4 << 0)
+#define		AT91_SDRAMC_DBW		(1   << 4)		/* Data Bus Width */
+#define			AT91_SDRAMC_DBW_32	(0 << 4)
+#define			AT91_SDRAMC_DBW_16	(1 << 4)
+
+#define AT91_SDRAMC_TR		(AT91_MC + 0x94)	/* Refresh Timer Register */
+#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Count */
+
+#define AT91_SDRAMC_CR		(AT91_MC + 0x98)	/* Configuration Register */
+#define		AT91_SDRAMC_NC		(3   <<  0)		/* Number of Column Bits */
+#define			AT91_SDRAMC_NC_8	(0 << 0)
+#define			AT91_SDRAMC_NC_9	(1 << 0)
+#define			AT91_SDRAMC_NC_10	(2 << 0)
+#define			AT91_SDRAMC_NC_11	(3 << 0)
+#define		AT91_SDRAMC_NR		(3   <<  2)		/* Number of Row Bits */
+#define			AT91_SDRAMC_NR_11	(0 << 2)
+#define			AT91_SDRAMC_NR_12	(1 << 2)
+#define			AT91_SDRAMC_NR_13	(2 << 2)
+#define		AT91_SDRAMC_NB		(1   <<  4)		/* Number of Banks */
+#define			AT91_SDRAMC_NB_2	(0 << 4)
+#define			AT91_SDRAMC_NB_4	(1 << 4)
+#define		AT91_SDRAMC_CAS		(3   <<  5)		/* CAS Latency */
+#define			AT91_SDRAMC_CAS_2	(2 << 5)
+#define		AT91_SDRAMC_TWR		(0xf <<  7)		/* Write Recovery Delay */
+#define		AT91_SDRAMC_TRC		(0xf << 11)		/* Row Cycle Delay */
+#define		AT91_SDRAMC_TRP		(0xf << 15)		/* Row Precharge Delay */
+#define		AT91_SDRAMC_TRCD	(0xf << 19)		/* Row to Column Delay */
+#define		AT91_SDRAMC_TRAS	(0xf << 23)		/* Active to Precharge Delay */
+#define		AT91_SDRAMC_TXSR	(0xf << 27)		/* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_SRR		(AT91_MC + 0x9c)	/* Self Refresh Register */
+#define AT91_SDRAMC_LPR		(AT91_MC + 0xa0)	/* Low Power Register */
+#define AT91_SDRAMC_IER		(AT91_MC + 0xa4)	/* Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		(AT91_MC + 0xa8)	/* Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		(AT91_MC + 0xac)	/* Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		(AT91_MC + 0xb0)	/* Interrupt Status Register */
+
+/* Burst Flash Controller register */
+#define AT91_BFC_MR		(AT91_MC + 0xc0)	/* Mode Register */
+#define		AT91_BFC_BFCOM		(3   <<  0)		/* Burst Flash Controller Operating Mode */
+#define			AT91_BFC_BFCOM_DISABLED	(0 << 0)
+#define			AT91_BFC_BFCOM_ASYNC	(1 << 0)
+#define			AT91_BFC_BFCOM_BURST	(2 << 0)
+#define		AT91_BFC_BFCC		(3   <<  2)		/* Burst Flash Controller Clock */
+#define			AT91_BFC_BFCC_MCK	(1 << 2)
+#define			AT91_BFC_BFCC_DIV2	(2 << 2)
+#define			AT91_BFC_BFCC_DIV4	(3 << 2)
+#define		AT91_BFC_AVL		(0xf <<  4)		/* Address Valid Latency */
+#define		AT91_BFC_PAGES		(7   <<  8)		/* Page Size */
+#define			AT91_BFC_PAGES_NO_PAGE	(0 << 8)
+#define			AT91_BFC_PAGES_16	(1 << 8)
+#define			AT91_BFC_PAGES_32	(2 << 8)
+#define			AT91_BFC_PAGES_64	(3 << 8)
+#define			AT91_BFC_PAGES_128	(4 << 8)
+#define			AT91_BFC_PAGES_256	(5 << 8)
+#define			AT91_BFC_PAGES_512	(6 << 8)
+#define			AT91_BFC_PAGES_1024	(7 << 8)
+#define		AT91_BFC_OEL		(3   << 12)		/* Output Enable Latency */
+#define		AT91_BFC_BAAEN		(1   << 16)		/* Burst Address Advance Enable */
+#define		AT91_BFC_BFOEH		(1   << 17)		/* Burst Flash Output Enable Handling */
+#define		AT91_BFC_MUXEN		(1   << 18)		/* Multiplexed Bus Enable */
+#define		AT91_BFC_RDYEN		(1   << 19)		/* Ready Enable Mode */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
new file mode 100644
index 000000000000..43c396b9b4cb
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -0,0 +1,138 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9260.h
+ *
+ * (C) 2006 Andrew Victor
+ *
+ * Common definitions.
+ * Based on AT91SAM9260 datasheet revision A (Preliminary).
+ *
+ * Includes also definitions for AT91SAM9XE and AT91SAM9G families
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_H
+#define AT91SAM9260_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9260_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9260_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9260_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91SAM9260_ID_ADC	5	/* Analog-to-Digital Converter */
+#define AT91SAM9260_ID_US0	6	/* USART 0 */
+#define AT91SAM9260_ID_US1	7	/* USART 1 */
+#define AT91SAM9260_ID_US2	8	/* USART 2 */
+#define AT91SAM9260_ID_MCI	9	/* Multimedia Card Interface */
+#define AT91SAM9260_ID_UDP	10	/* USB Device Port */
+#define AT91SAM9260_ID_TWI	11	/* Two-Wire Interface */
+#define AT91SAM9260_ID_SPI0	12	/* Serial Peripheral Interface 0 */
+#define AT91SAM9260_ID_SPI1	13	/* Serial Peripheral Interface 1 */
+#define AT91SAM9260_ID_SSC	14	/* Serial Synchronous Controller */
+#define AT91SAM9260_ID_TC0	17	/* Timer Counter 0 */
+#define AT91SAM9260_ID_TC1	18	/* Timer Counter 1 */
+#define AT91SAM9260_ID_TC2	19	/* Timer Counter 2 */
+#define AT91SAM9260_ID_UHP	20	/* USB Host port */
+#define AT91SAM9260_ID_EMAC	21	/* Ethernet */
+#define AT91SAM9260_ID_ISI	22	/* Image Sensor Interface */
+#define AT91SAM9260_ID_US3	23	/* USART 3 */
+#define AT91SAM9260_ID_US4	24	/* USART 4 */
+#define AT91SAM9260_ID_US5	25	/* USART 5 */
+#define AT91SAM9260_ID_TC3	26	/* Timer Counter 3 */
+#define AT91SAM9260_ID_TC4	27	/* Timer Counter 4 */
+#define AT91SAM9260_ID_TC5	28	/* Timer Counter 5 */
+#define AT91SAM9260_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9260_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9260_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9260_BASE_TCB0		0xfffa0000
+#define AT91SAM9260_BASE_TC0		0xfffa0000
+#define AT91SAM9260_BASE_TC1		0xfffa0040
+#define AT91SAM9260_BASE_TC2		0xfffa0080
+#define AT91SAM9260_BASE_UDP		0xfffa4000
+#define AT91SAM9260_BASE_MCI		0xfffa8000
+#define AT91SAM9260_BASE_TWI		0xfffac000
+#define AT91SAM9260_BASE_US0		0xfffb0000
+#define AT91SAM9260_BASE_US1		0xfffb4000
+#define AT91SAM9260_BASE_US2		0xfffb8000
+#define AT91SAM9260_BASE_SSC		0xfffbc000
+#define AT91SAM9260_BASE_ISI		0xfffc0000
+#define AT91SAM9260_BASE_EMAC		0xfffc4000
+#define AT91SAM9260_BASE_SPI0		0xfffc8000
+#define AT91SAM9260_BASE_SPI1		0xfffcc000
+#define AT91SAM9260_BASE_US3		0xfffd0000
+#define AT91SAM9260_BASE_US4		0xfffd4000
+#define AT91SAM9260_BASE_US5		0xfffd8000
+#define AT91SAM9260_BASE_TCB1		0xfffdc000
+#define AT91SAM9260_BASE_TC3		0xfffdc000
+#define AT91SAM9260_BASE_TC4		0xfffdc040
+#define AT91SAM9260_BASE_TC5		0xfffdc080
+#define AT91SAM9260_BASE_ADC		0xfffe0000
+#define AT91_BASE_SYS			0xffffe800
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9260_BASE_US0
+#define AT91_USART1	AT91SAM9260_BASE_US1
+#define AT91_USART2	AT91SAM9260_BASE_US2
+#define AT91_USART3	AT91SAM9260_BASE_US3
+#define AT91_USART4	AT91SAM9260_BASE_US4
+#define AT91_USART5	AT91SAM9260_BASE_US5
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9260_ROM_BASE	0x00100000	/* Internal ROM base address */
+#define AT91SAM9260_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
+
+#define AT91SAM9260_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
+#define AT91SAM9260_SRAM0_SIZE	SZ_4K		/* Internal SRAM 0 size (4Kb) */
+#define AT91SAM9260_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
+#define AT91SAM9260_SRAM1_SIZE	SZ_4K		/* Internal SRAM 1 size (4Kb) */
+
+#define AT91SAM9260_UHP_BASE	0x00500000	/* USB Host controller */
+
+#define AT91SAM9XE_FLASH_BASE	0x00200000	/* Internal FLASH base address */
+#define AT91SAM9XE_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+
+#define AT91SAM9G20_ROM_BASE	0x00100000	/* Internal ROM base address */
+#define AT91SAM9G20_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
+
+#define AT91SAM9G20_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
+#define AT91SAM9G20_SRAM0_SIZE	SZ_16K		/* Internal SRAM 0 size (16Kb) */
+#define AT91SAM9G20_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
+#define AT91SAM9G20_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9G20_UHP_BASE	0x00500000	/* USB Host controller */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
new file mode 100644
index 000000000000..f027de5df956
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_MATRIX_H
+#define AT91SAM9260_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff <<  0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x11C)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
+#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
new file mode 100644
index 000000000000..3a348ca20773
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -0,0 +1,105 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9261.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91SAM9261 datasheet revision E. (Preliminary)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_H
+#define AT91SAM9261_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9261_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9261_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9261_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91SAM9261_ID_US0	6	/* USART 0 */
+#define AT91SAM9261_ID_US1	7	/* USART 1 */
+#define AT91SAM9261_ID_US2	8	/* USART 2 */
+#define AT91SAM9261_ID_MCI	9	/* Multimedia Card Interface */
+#define AT91SAM9261_ID_UDP	10	/* USB Device Port */
+#define AT91SAM9261_ID_TWI	11	/* Two-Wire Interface */
+#define AT91SAM9261_ID_SPI0	12	/* Serial Peripheral Interface 0 */
+#define AT91SAM9261_ID_SPI1	13	/* Serial Peripheral Interface 1 */
+#define AT91SAM9261_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT91SAM9261_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT91SAM9261_ID_SSC2	16	/* Serial Synchronous Controller 2 */
+#define AT91SAM9261_ID_TC0	17	/* Timer Counter 0 */
+#define AT91SAM9261_ID_TC1	18	/* Timer Counter 1 */
+#define AT91SAM9261_ID_TC2	19	/* Timer Counter 2 */
+#define AT91SAM9261_ID_UHP	20	/* USB Host port */
+#define AT91SAM9261_ID_LCDC	21	/* LDC Controller */
+#define AT91SAM9261_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9261_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9261_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9261_BASE_TCB0		0xfffa0000
+#define AT91SAM9261_BASE_TC0		0xfffa0000
+#define AT91SAM9261_BASE_TC1		0xfffa0040
+#define AT91SAM9261_BASE_TC2		0xfffa0080
+#define AT91SAM9261_BASE_UDP		0xfffa4000
+#define AT91SAM9261_BASE_MCI		0xfffa8000
+#define AT91SAM9261_BASE_TWI		0xfffac000
+#define AT91SAM9261_BASE_US0		0xfffb0000
+#define AT91SAM9261_BASE_US1		0xfffb4000
+#define AT91SAM9261_BASE_US2		0xfffb8000
+#define AT91SAM9261_BASE_SSC0		0xfffbc000
+#define AT91SAM9261_BASE_SSC1		0xfffc0000
+#define AT91SAM9261_BASE_SSC2		0xfffc4000
+#define AT91SAM9261_BASE_SPI0		0xfffc8000
+#define AT91SAM9261_BASE_SPI1		0xfffcc000
+#define AT91_BASE_SYS			0xffffea00
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9261_BASE_US0
+#define AT91_USART1	AT91SAM9261_BASE_US1
+#define AT91_USART2	AT91SAM9261_BASE_US2
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
+
+#define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
+
+#define AT91SAM9261_UHP_BASE	0x00500000	/* USB Host controller */
+#define AT91SAM9261_LCDC_BASE	0x00600000	/* LDC controller */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
new file mode 100644
index 000000000000..db62b1f18300
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_MATRIX_H
+#define AT91SAM9261_MATRIX_H
+
+#define AT91_MATRIX_MCFG	(AT91_MATRIX + 0x00)	/* Master Configuration Register */
+#define		AT91_MATRIX_RCB0	(1 << 0)		/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x04)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x08)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x0C)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x10)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x14)	/* Slave Configuration Register 4 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
+
+#define AT91_MATRIX_TCR		(AT91_MATRIX + 0x24)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define			AT91_MATRIX_ITCM_64		(7 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+#define			AT91_MATRIX_DTCM_64		(7 << 4)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x30)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+
+#define AT91_MATRIX_USBPUCR	(AT91_MATRIX + 0x34)	/* USB Pad Pull-Up Control Register */
+#define		AT91_MATRIX_USBPUCR_PUON	(1 << 30)	/* USB Device PAD Pull-up Enable */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
new file mode 100644
index 000000000000..2091f1e42d43
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9263.h
+ *
+ * (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_H
+#define AT91SAM9263_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9263_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9263_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9263_ID_PIOCDE	4	/* Parallel IO Controller C, D and E */
+#define AT91SAM9263_ID_US0	7	/* USART 0 */
+#define AT91SAM9263_ID_US1	8	/* USART 1 */
+#define AT91SAM9263_ID_US2	9	/* USART 2 */
+#define AT91SAM9263_ID_MCI0	10	/* Multimedia Card Interface 0 */
+#define AT91SAM9263_ID_MCI1	11	/* Multimedia Card Interface 1 */
+#define AT91SAM9263_ID_CAN	12	/* CAN */
+#define AT91SAM9263_ID_TWI	13	/* Two-Wire Interface */
+#define AT91SAM9263_ID_SPI0	14	/* Serial Peripheral Interface 0 */
+#define AT91SAM9263_ID_SPI1	15	/* Serial Peripheral Interface 1 */
+#define AT91SAM9263_ID_SSC0	16	/* Serial Synchronous Controller 0 */
+#define AT91SAM9263_ID_SSC1	17	/* Serial Synchronous Controller 1 */
+#define AT91SAM9263_ID_AC97C	18	/* AC97 Controller */
+#define AT91SAM9263_ID_TCB	19	/* Timer Counter 0, 1 and 2 */
+#define AT91SAM9263_ID_PWMC	20	/* Pulse Width Modulation Controller */
+#define AT91SAM9263_ID_EMAC	21	/* Ethernet */
+#define AT91SAM9263_ID_2DGE	23	/* 2D Graphic Engine */
+#define AT91SAM9263_ID_UDP	24	/* USB Device Port */
+#define AT91SAM9263_ID_ISI	25	/* Image Sensor Interface */
+#define AT91SAM9263_ID_LCDC	26	/* LCD Controller */
+#define AT91SAM9263_ID_DMA	27	/* DMA Controller */
+#define AT91SAM9263_ID_UHP	29	/* USB Host port */
+#define AT91SAM9263_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9263_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9263_BASE_UDP		0xfff78000
+#define AT91SAM9263_BASE_TCB0		0xfff7c000
+#define AT91SAM9263_BASE_TC0		0xfff7c000
+#define AT91SAM9263_BASE_TC1		0xfff7c040
+#define AT91SAM9263_BASE_TC2		0xfff7c080
+#define AT91SAM9263_BASE_MCI0		0xfff80000
+#define AT91SAM9263_BASE_MCI1		0xfff84000
+#define AT91SAM9263_BASE_TWI		0xfff88000
+#define AT91SAM9263_BASE_US0		0xfff8c000
+#define AT91SAM9263_BASE_US1		0xfff90000
+#define AT91SAM9263_BASE_US2		0xfff94000
+#define AT91SAM9263_BASE_SSC0		0xfff98000
+#define AT91SAM9263_BASE_SSC1		0xfff9c000
+#define AT91SAM9263_BASE_AC97C		0xfffa0000
+#define AT91SAM9263_BASE_SPI0		0xfffa4000
+#define AT91SAM9263_BASE_SPI1		0xfffa8000
+#define AT91SAM9263_BASE_CAN		0xfffac000
+#define AT91SAM9263_BASE_PWMC		0xfffb8000
+#define AT91SAM9263_BASE_EMAC		0xfffbc000
+#define AT91SAM9263_BASE_ISI		0xfffc4000
+#define AT91SAM9263_BASE_2DGE		0xfffc8000
+#define AT91_BASE_SYS			0xffffe000
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC0	(0xffffe000 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_SMC0	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_ECC1	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SDRAMC1	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SMC1	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffed10 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT0	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_RTT1	(0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9263_BASE_US0
+#define AT91_USART1	AT91SAM9263_BASE_US1
+#define AT91_USART2	AT91SAM9263_BASE_US2
+
+#define AT91_SMC	AT91_SMC0
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9263_SRAM0_BASE	0x00300000	/* Internal SRAM 0 base address */
+#define AT91SAM9263_SRAM0_SIZE	(80 * SZ_1K)	/* Internal SRAM 0 size (80Kb) */
+
+#define AT91SAM9263_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9263_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
+
+#define AT91SAM9263_SRAM1_BASE	0x00500000	/* Internal SRAM 1 base address */
+#define AT91SAM9263_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9263_LCDC_BASE	0x00700000	/* LCD Controller */
+#define AT91SAM9263_DMAC_BASE	0x00800000	/* DMA Controller */
+#define AT91SAM9263_UHP_BASE	0x00a00000	/* USB Host controller */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
new file mode 100644
index 000000000000..9b3efd3eb2f3
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
@@ -0,0 +1,129 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
+ *
+ *  Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_MATRIX_H
+#define AT91SAM9263_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+
+#define AT91_MATRIX_EBI0CSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI0_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI0_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI0_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI0_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI0_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI0_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI0_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI0_CS4A_SMC_CF1		(1 << 4)
+#define		AT91_MATRIX_EBI0_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI0_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI0_CS5A_SMC_CF2		(1 << 5)
+#define		AT91_MATRIX_EBI0_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI0_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI0_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI0_VDDIOMSEL_3_3V		(1 << 16)
+
+#define AT91_MATRIX_EBI1CSA	(AT91_MATRIX + 0x124)	/* EBI1 Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI1_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI1_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI1_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI1_CS2A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI1_CS2A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI1_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI1_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI1_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI1_VDDIOMSEL_3_3V		(1 << 16)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
new file mode 100644
index 000000000000..1921181c63ca
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+ *
+ * SDRAM Controllers (SDRAMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9_SDRAMC_H
+#define AT91SAM9_SDRAMC_H
+
+/* SDRAM Controller (SDRAMC) registers */
+#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
+#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
+#define			AT91_SDRAMC_MODE_NORMAL		0
+#define			AT91_SDRAMC_MODE_NOP		1
+#define			AT91_SDRAMC_MODE_PRECHARGE	2
+#define			AT91_SDRAMC_MODE_LMR		3
+#define			AT91_SDRAMC_MODE_REFRESH	4
+#define			AT91_SDRAMC_MODE_EXT_LMR	5
+#define			AT91_SDRAMC_MODE_DEEP		6
+
+#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
+#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
+
+#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
+#define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
+#define			AT91_SDRAMC_NC_8	(0 << 0)
+#define			AT91_SDRAMC_NC_9	(1 << 0)
+#define			AT91_SDRAMC_NC_10	(2 << 0)
+#define			AT91_SDRAMC_NC_11	(3 << 0)
+#define		AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
+#define			AT91_SDRAMC_NR_11	(0 << 2)
+#define			AT91_SDRAMC_NR_12	(1 << 2)
+#define			AT91_SDRAMC_NR_13	(2 << 2)
+#define		AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
+#define			AT91_SDRAMC_NB_2	(0 << 4)
+#define			AT91_SDRAMC_NB_4	(1 << 4)
+#define		AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
+#define			AT91_SDRAMC_CAS_1	(1 << 5)
+#define			AT91_SDRAMC_CAS_2	(2 << 5)
+#define			AT91_SDRAMC_CAS_3	(3 << 5)
+#define		AT91_SDRAMC_DBW		(1 << 7)		/* Data Bus Width */
+#define			AT91_SDRAMC_DBW_32	(0 << 7)
+#define			AT91_SDRAMC_DBW_16	(1 << 7)
+#define		AT91_SDRAMC_TWR		(0xf <<  8)		/* Write Recovery Delay */
+#define		AT91_SDRAMC_TRC		(0xf << 12)		/* Row Cycle Delay */
+#define		AT91_SDRAMC_TRP		(0xf << 16)		/* Row Precharge Delay */
+#define		AT91_SDRAMC_TRCD	(0xf << 20)		/* Row to Column Delay */
+#define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
+#define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
+#define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
+#define			AT91_SDRAMC_LPCB_DISABLE		0
+#define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
+#define			AT91_SDRAMC_LPCB_POWER_DOWN		2
+#define			AT91_SDRAMC_LPCB_DEEP_POWER_DOWN	3
+#define		AT91_SDRAMC_PASR		(7 << 4)	/* Partial Array Self Refresh */
+#define		AT91_SDRAMC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
+#define		AT91_SDRAMC_DS			(3 << 10)	/* Drive Strength */
+#define		AT91_SDRAMC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
+#define			AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
+#define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
+#define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
+
+#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
+#define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
+
+#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
+#define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
+#define			AT91_SDRAMC_MD_SDRAM		0
+#define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
new file mode 100644
index 000000000000..ec6ad1338b5a
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9_smc.h
+ *
+ * Static Memory Controllers (SMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9_SMC_H
+#define AT91SAM9_SMC_H
+
+#define AT91_SMC_SETUP(n)	(AT91_SMC + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
+#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
+#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
+#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
+#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
+#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
+#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
+#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
+
+#define AT91_SMC_PULSE(n)	(AT91_SMC + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
+#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
+#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
+#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
+#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
+#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
+#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
+#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
+
+#define AT91_SMC_CYCLE(n)	(AT91_SMC + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
+#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
+#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
+#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
+
+#define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
+#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
+#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
+#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
+#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
+#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
+#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
+#define			AT91_SMC_BAT_SELECT		(0 << 8)
+#define			AT91_SMC_BAT_WRITE		(1 << 8)
+#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
+#define			AT91_SMC_DBW_8			(0 << 12)
+#define			AT91_SMC_DBW_16			(1 << 12)
+#define			AT91_SMC_DBW_32			(2 << 12)
+#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
+#define			AT91_SMC_TDF_(x)		((x) << 16)
+#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
+#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
+#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
+#define			AT91_SMC_PS_4			(0 << 28)
+#define			AT91_SMC_PS_8			(1 << 28)
+#define			AT91_SMC_PS_16			(2 << 28)
+#define			AT91_SMC_PS_32			(3 << 28)
+
+#if defined(AT91_SMC1)		/* The AT91SAM9263 has 2 Static Memory contollers */
+#define AT91_SMC1_SETUP(n)	(AT91_SMC1 + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define AT91_SMC1_PULSE(n)	(AT91_SMC1 + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define AT91_SMC1_CYCLE(n)	(AT91_SMC1 + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define AT91_SMC1_MODE(n)	(AT91_SMC1 + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#endif
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
new file mode 100644
index 000000000000..fc2de6c09c86
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9260.h
+ *
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * Common definitions.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_H
+#define AT91SAM9RL_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Controller */
+#define AT91SAM9RL_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9RL_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9RL_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91SAM9RL_ID_PIOD	5	/* Parallel IO Controller D */
+#define AT91SAM9RL_ID_US0	6	/* USART 0 */
+#define AT91SAM9RL_ID_US1	7	/* USART 1 */
+#define AT91SAM9RL_ID_US2	8	/* USART 2 */
+#define AT91SAM9RL_ID_US3	9	/* USART 3 */
+#define AT91SAM9RL_ID_MCI	10	/* Multimedia Card Interface */
+#define AT91SAM9RL_ID_TWI0	11	/* TWI 0 */
+#define AT91SAM9RL_ID_TWI1	12	/* TWI 1 */
+#define AT91SAM9RL_ID_SPI	13	/* Serial Peripheral Interface */
+#define AT91SAM9RL_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT91SAM9RL_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT91SAM9RL_ID_TC0	16	/* Timer Counter 0 */
+#define AT91SAM9RL_ID_TC1	17	/* Timer Counter 1 */
+#define AT91SAM9RL_ID_TC2	18	/* Timer Counter 2 */
+#define AT91SAM9RL_ID_PWMC	19	/* Pulse Width Modulation Controller */
+#define AT91SAM9RL_ID_TSC	20	/* Touch Screen Controller */
+#define AT91SAM9RL_ID_DMA	21	/* DMA Controller */
+#define AT91SAM9RL_ID_UDPHS	22	/* USB Device HS */
+#define AT91SAM9RL_ID_LCDC	23	/* LCD Controller */
+#define AT91SAM9RL_ID_AC97C	24	/* AC97 Controller */
+#define AT91SAM9RL_ID_IRQ0	31	/* Advanced Interrupt Controller (IRQ0) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9RL_BASE_TCB0	0xfffa0000
+#define AT91SAM9RL_BASE_TC0	0xfffa0000
+#define AT91SAM9RL_BASE_TC1	0xfffa0040
+#define AT91SAM9RL_BASE_TC2	0xfffa0080
+#define AT91SAM9RL_BASE_MCI	0xfffa4000
+#define AT91SAM9RL_BASE_TWI0	0xfffa8000
+#define AT91SAM9RL_BASE_TWI1	0xfffac000
+#define AT91SAM9RL_BASE_US0	0xfffb0000
+#define AT91SAM9RL_BASE_US1	0xfffb4000
+#define AT91SAM9RL_BASE_US2	0xfffb8000
+#define AT91SAM9RL_BASE_US3	0xfffbc000
+#define AT91SAM9RL_BASE_SSC0	0xfffc0000
+#define AT91SAM9RL_BASE_SSC1	0xfffc4000
+#define AT91SAM9RL_BASE_PWMC	0xfffc8000
+#define AT91SAM9RL_BASE_SPI	0xfffcc000
+#define AT91SAM9RL_BASE_TSC	0xfffd0000
+#define AT91SAM9RL_BASE_UDPHS	0xfffd4000
+#define AT91SAM9RL_BASE_AC97C	0xfffd8000
+#define AT91_BASE_SYS		0xffffc000
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_DMA	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_SCKCR	(0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)
+
+#define AT91_USART0	AT91SAM9RL_BASE_US0
+#define AT91_USART1	AT91SAM9RL_BASE_US1
+#define AT91_USART2	AT91SAM9RL_BASE_US2
+#define AT91_USART3	AT91SAM9RL_BASE_US3
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9RL_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9RL_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
+
+#define AT91SAM9RL_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9RL_ROM_SIZE	(2 * SZ_16K)	/* Internal ROM size (32Kb) */
+
+#define AT91SAM9RL_LCDC_BASE	0x00500000	/* LCD Controller */
+#define AT91SAM9RL_UDPHS_FIFO	0x00600000	/* USB Device HS controller */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
new file mode 100644
index 000000000000..5f9149071fe5
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
+ *
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9RL datasheet revision A. (Preliminary)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef AT91SAM9RL_MATRIX_H
+#define AT91SAM9RL_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(0xf  << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
+#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h
new file mode 100644
index 000000000000..d34cdb8abdca
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at91x40.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-at91/include/mach/at91x40.h
+ *
+ * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91X40_H
+#define AT91X40_H
+
+/*
+ *	IRQ list.
+ */
+#define AT91_ID_FIQ		0	/* FIQ */
+#define AT91_ID_SYS		1	/* System Peripheral */
+#define AT91X40_ID_USART0	2	/* USART port 0 */
+#define AT91X40_ID_USART1	3	/* USART port 1 */
+#define AT91X40_ID_TC0		4	/* Timer/Counter 0 */
+#define AT91X40_ID_TC1		5	/* Timer/Counter 1*/
+#define AT91X40_ID_TC2		6	/* Timer/Counter 2*/
+#define AT91X40_ID_WD		7	/* Watchdog? */
+#define AT91X40_ID_PIOA		8	/* Parallel IO Controller A */
+
+#define AT91X40_ID_IRQ0		16	/* External IRQ 0 */
+#define AT91X40_ID_IRQ1		17	/* External IRQ 1 */
+#define AT91X40_ID_IRQ2		18	/* External IRQ 2 */
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_BASE_SYS	0xffc00000
+
+#define AT91_EBI	(0xffe00000 - AT91_BASE_SYS)	/* External Bus Interface */
+#define AT91_SF		(0xfff00000 - AT91_BASE_SYS)	/* Special Function */
+#define AT91_USART1	(0xfffcc000 - AT91_BASE_SYS)	/* USART 1 */
+#define AT91_USART0	(0xfffd0000 - AT91_BASE_SYS)	/* USART 0 */
+#define AT91_TC		(0xfffe0000 - AT91_BASE_SYS)	/* Timer Counter */
+#define AT91_PIOA	(0xffff0000 - AT91_BASE_SYS)	/* PIO Controller A */
+#define AT91_PS		(0xffff4000 - AT91_BASE_SYS)	/* Power Save */
+#define AT91_WD		(0xffff8000 - AT91_BASE_SYS)	/* Watchdog Timer */
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
+
+/*
+ * The AT91x40 series doesn't have a debug unit like the other AT91 parts.
+ * But it does have a chip identify register and extension ID, so define at
+ * least these here.
+ */
+#define AT91_DBGU_CIDR	(AT91_SF + 0)	/* CIDR in PS segment */
+#define AT91_DBGU_EXID	(AT91_SF + 4)	/* EXID in PS segment */
+
+#endif /* AT91X40_H */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
new file mode 100644
index 000000000000..acd60f2a0724
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -0,0 +1,172 @@
+/*
+ * arch/arm/mach-at91/include/mach/board.h
+ *
+ *  Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * These are data structures found in platform_device.dev.platform_data,
+ * and describing board-specific data needed by drivers.  For example,
+ * which pin is used for a given GPIO role.
+ *
+ * In 2.6, drivers should strongly avoid board-specific knowledge so
+ * that supporting new boards normally won't require driver patches.
+ * Most board-specific knowledge should be in arch/.../board-*.c files.
+ */
+
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <linux/mtd/partitions.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/atmel_usba_udc.h>
+
+ /* USB Device */
+struct at91_udc_data {
+	u8	vbus_pin;		/* high == host powering us */
+	u8	pullup_pin;		/* active == D+ pulled up */
+	u8	pullup_active_low;	/* true == pullup_pin is active low */
+};
+extern void __init at91_add_device_udc(struct at91_udc_data *data);
+
+ /* USB High Speed Device */
+extern void __init at91_add_device_usba(struct usba_platform_data *data);
+
+ /* Compact Flash */
+struct at91_cf_data {
+	u8	irq_pin;		/* I/O IRQ */
+	u8	det_pin;		/* Card detect */
+	u8	vcc_pin;		/* power switching */
+	u8	rst_pin;		/* card reset */
+	u8	chipselect;		/* EBI Chip Select number */
+};
+extern void __init at91_add_device_cf(struct at91_cf_data *data);
+
+ /* MMC / SD */
+struct at91_mmc_data {
+	u8		det_pin;	/* card detect IRQ */
+	unsigned	slot_b:1;	/* uses Slot B */
+	unsigned	wire4:1;	/* (SD) supports DAT0..DAT3 */
+	u8		wp_pin;		/* (SD) writeprotect detect */
+	u8		vcc_pin;	/* power switching (high == on) */
+};
+extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
+
+ /* Ethernet (EMAC & MACB) */
+struct at91_eth_data {
+	u32		phy_mask;
+	u8		phy_irq_pin;	/* PHY IRQ */
+	u8		is_rmii;	/* using RMII interface? */
+};
+extern void __init at91_add_device_eth(struct at91_eth_data *data);
+
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9)
+#define eth_platform_data	at91_eth_data
+#endif
+
+ /* USB Host */
+struct at91_usbh_data {
+	u8		ports;		/* number of ports on root hub */
+	u8		vbus_pin[];	/* port power-control pin */
+};
+extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+
+ /* NAND / SmartMedia */
+struct atmel_nand_data {
+	u8		enable_pin;	/* chip enable */
+	u8		det_pin;	/* card detect */
+	u8		rdy_pin;	/* ready/busy */
+	u8		ale;		/* address line number connected to ALE */
+	u8		cle;		/* address line number connected to CLE */
+	u8		bus_width_16;	/* buswidth is 16 bit */
+	struct mtd_partition* (*partition_info)(int, int*);
+};
+extern void __init at91_add_device_nand(struct atmel_nand_data *data);
+
+ /* I2C*/
+extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
+
+ /* SPI */
+extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
+
+ /* Serial */
+#define ATMEL_UART_CTS	0x01
+#define ATMEL_UART_RTS	0x02
+#define ATMEL_UART_DSR	0x04
+#define ATMEL_UART_DTR	0x08
+#define ATMEL_UART_DCD	0x10
+#define ATMEL_UART_RI	0x20
+
+extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
+extern void __init at91_set_serial_console(unsigned portnr);
+
+struct at91_uart_config {
+	unsigned short	console_tty;	/* tty number of serial console */
+	unsigned short	nr_tty;		/* number of serial tty's */
+	short		tty_map[];	/* map UART to tty number */
+};
+extern struct platform_device *atmel_default_console_device;
+extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
+
+struct atmel_uart_data {
+	short		use_dma_tx;	/* use transmit DMA? */
+	short		use_dma_rx;	/* use receive DMA? */
+	void __iomem	*regs;		/* virtual base address, if any */
+};
+extern void __init at91_add_device_serial(void);
+
+/*
+ * SSC -- accessed through ssc_request(id).  Drivers don't bind to SSC
+ * platform devices.  Their SSC ID is part of their configuration data,
+ * along with information about which SSC signals they should use.
+ */
+#define ATMEL_SSC_TK	0x01
+#define ATMEL_SSC_TF	0x02
+#define ATMEL_SSC_TD	0x04
+#define ATMEL_SSC_TX	(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
+
+#define ATMEL_SSC_RK	0x10
+#define ATMEL_SSC_RF	0x20
+#define ATMEL_SSC_RD	0x40
+#define ATMEL_SSC_RX	(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
+
+extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
+
+ /* LCD Controller */
+struct atmel_lcdfb_info;
+extern void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data);
+
+ /* AC97 */
+struct atmel_ac97_data {
+	u8		reset_pin;	/* reset */
+};
+extern void __init at91_add_device_ac97(struct atmel_ac97_data *data);
+
+ /* ISI */
+extern void __init at91_add_device_isi(void);
+
+ /* LEDs */
+extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
+extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
+
+/* FIXME: this needs a better location, but gets stuff building again */
+extern int at91_suspend_entering_slow_clock(void);
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
new file mode 100644
index 000000000000..dbfd9f73f80b
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -0,0 +1,103 @@
+/*
+ * arch/arm/mach-at91/include/mach/cpu.h
+ *
+ *  Copyright (C) 2006 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_CPU_H
+#define __ASM_ARCH_CPU_H
+
+#include <mach/hardware.h>
+#include <mach/at91_dbgu.h>
+
+
+#define ARCH_ID_AT91RM9200	0x09290780
+#define ARCH_ID_AT91SAM9260	0x019803a0
+#define ARCH_ID_AT91SAM9261	0x019703a0
+#define ARCH_ID_AT91SAM9263	0x019607a0
+#define ARCH_ID_AT91SAM9G20	0x019905a0
+#define ARCH_ID_AT91SAM9RL64	0x019b03a0
+#define ARCH_ID_AT91CAP9	0x039A03A0
+
+#define ARCH_ID_AT91SAM9XE128	0x329973a0
+#define ARCH_ID_AT91SAM9XE256	0x329a93a0
+#define ARCH_ID_AT91SAM9XE512	0x329aa3a0
+
+#define ARCH_ID_AT91M40800	0x14080044
+#define ARCH_ID_AT91R40807	0x44080746
+#define ARCH_ID_AT91M40807	0x14080745
+#define ARCH_ID_AT91R40008	0x44000840
+
+static inline unsigned long at91_cpu_identify(void)
+{
+	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
+}
+
+
+#define ARCH_FAMILY_AT91X92	0x09200000
+#define ARCH_FAMILY_AT91SAM9	0x01900000
+#define ARCH_FAMILY_AT91SAM9XE	0x02900000
+
+static inline unsigned long at91_arch_identify(void)
+{
+	return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
+}
+
+
+#ifdef CONFIG_ARCH_AT91RM9200
+#define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
+#else
+#define cpu_is_at91rm9200()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9260
+#define cpu_is_at91sam9xe()	(at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE)
+#define cpu_is_at91sam9260()	((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe())
+#else
+#define cpu_is_at91sam9xe()	(0)
+#define cpu_is_at91sam9260()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9G20
+#define cpu_is_at91sam9g20()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G20)
+#else
+#define cpu_is_at91sam9g20()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9261
+#define cpu_is_at91sam9261()	(at91_cpu_identify() == ARCH_ID_AT91SAM9261)
+#else
+#define cpu_is_at91sam9261()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9263
+#define cpu_is_at91sam9263()	(at91_cpu_identify() == ARCH_ID_AT91SAM9263)
+#else
+#define cpu_is_at91sam9263()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9RL
+#define cpu_is_at91sam9rl()	(at91_cpu_identify() == ARCH_ID_AT91SAM9RL64)
+#else
+#define cpu_is_at91sam9rl()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91CAP9
+#define cpu_is_at91cap9()	(at91_cpu_identify() == ARCH_ID_AT91CAP9)
+#else
+#define cpu_is_at91cap9()	(0)
+#endif
+
+/*
+ * Since this is ARM, we will never run on any AVR32 CPU. But these
+ * definitions may reduce clutter in common drivers.
+ */
+#define cpu_is_at32ap7000()	(0)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
new file mode 100644
index 000000000000..29052ba66ada
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-at91/include/mach/debug-macro.S
+ *
+ *  Copyright (C) 2003-2005 SAN People
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <mach/hardware.h>
+#include <mach/at91_dbgu.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1						@ MMU enabled?
+	ldreq	\rx, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
+	ldrne	\rx, =(AT91_VA_BASE_SYS	+ AT91_DBGU)		@ System peripherals (virt address)
+	.endm
+
+	.macro	senduart,rd,rx
+	strb	\rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)]	@ Write to Transmitter Holding Register
+	.endm
+
+	.macro	waituart,rd,rx
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXRDY				@ DBGU_TXRDY = 1 when ready to transmit
+	beq	1001b
+	.endm
+
+	.macro	busyuart,rd,rx
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXEMPTY				@ DBGU_TXEMPTY = 1 when transmission complete
+	beq	1001b
+	.endm
+
diff --git a/arch/arm/mach-at91/include/mach/dma.h b/arch/arm/mach-at91/include/mach/dma.h
new file mode 100644
index 000000000000..e4f90c177616
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/dma.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-at91/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S
new file mode 100644
index 000000000000..7ab68f972227
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-at91/include/mach/entry-macro.S
+ *
+ *  Copyright (C) 2003-2005 SAN People
+ *
+ * Low-level IRQ helper macros for AT91RM9200 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/hardware.h>
+#include <mach/at91_aic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =(AT91_VA_BASE_SYS + AT91_AIC)		@ base virtual address of AIC peripheral
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)]	@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+	ldr	\irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)]	@ read interrupt source number
+	teq	\irqstat, #0					@ ISR is 0 when no current interrupt, or spurious interrupt
+	streq	\tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)]	@ not going to be handled further, then ACK it now.
+	.endm
+
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
new file mode 100644
index 000000000000..76d76e2fa69e
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -0,0 +1,252 @@
+/*
+ * arch/arm/mach-at91/include/mach/gpio.h
+ *
+ *  Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
+#define __ASM_ARCH_AT91RM9200_GPIO_H
+
+#include <asm/irq.h>
+
+#define PIN_BASE		NR_AIC_IRQS
+
+#define MAX_GPIO_BANKS		5
+
+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
+
+#define	AT91_PIN_PA0	(PIN_BASE + 0x00 + 0)
+#define	AT91_PIN_PA1	(PIN_BASE + 0x00 + 1)
+#define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
+#define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
+#define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
+#define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
+#define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
+#define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
+#define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
+#define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
+#define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
+#define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
+#define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
+#define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
+#define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
+#define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
+#define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
+#define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
+#define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
+#define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
+#define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
+#define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
+#define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
+#define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
+#define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
+#define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
+#define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
+#define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
+#define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
+#define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
+#define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
+#define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
+
+#define	AT91_PIN_PB0	(PIN_BASE + 0x20 + 0)
+#define	AT91_PIN_PB1	(PIN_BASE + 0x20 + 1)
+#define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
+#define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
+#define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
+#define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
+#define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
+#define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
+#define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
+#define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
+#define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
+#define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
+#define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
+#define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
+#define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
+#define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
+#define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
+#define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
+#define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
+#define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
+#define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
+#define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
+#define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
+#define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
+#define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
+#define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
+#define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
+#define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
+#define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
+#define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
+#define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
+#define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
+
+#define	AT91_PIN_PC0	(PIN_BASE + 0x40 + 0)
+#define	AT91_PIN_PC1	(PIN_BASE + 0x40 + 1)
+#define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
+#define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
+#define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
+#define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
+#define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
+#define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
+#define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
+#define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
+#define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
+#define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
+#define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
+#define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
+#define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
+#define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
+#define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
+#define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
+#define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
+#define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
+#define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
+#define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
+#define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
+#define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
+#define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
+#define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
+#define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
+#define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
+#define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
+#define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
+#define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
+#define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
+
+#define	AT91_PIN_PD0	(PIN_BASE + 0x60 + 0)
+#define	AT91_PIN_PD1	(PIN_BASE + 0x60 + 1)
+#define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
+#define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
+#define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
+#define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
+#define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
+#define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
+#define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
+#define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
+#define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
+#define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
+#define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
+#define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
+#define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
+#define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
+#define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
+#define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
+#define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
+#define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
+#define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
+#define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
+#define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
+#define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
+#define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
+#define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
+#define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
+#define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
+#define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
+#define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
+#define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
+#define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
+
+#define	AT91_PIN_PE0	(PIN_BASE + 0x80 + 0)
+#define	AT91_PIN_PE1	(PIN_BASE + 0x80 + 1)
+#define	AT91_PIN_PE2	(PIN_BASE + 0x80 + 2)
+#define	AT91_PIN_PE3	(PIN_BASE + 0x80 + 3)
+#define	AT91_PIN_PE4	(PIN_BASE + 0x80 + 4)
+#define	AT91_PIN_PE5	(PIN_BASE + 0x80 + 5)
+#define	AT91_PIN_PE6	(PIN_BASE + 0x80 + 6)
+#define	AT91_PIN_PE7	(PIN_BASE + 0x80 + 7)
+#define	AT91_PIN_PE8	(PIN_BASE + 0x80 + 8)
+#define	AT91_PIN_PE9	(PIN_BASE + 0x80 + 9)
+#define	AT91_PIN_PE10	(PIN_BASE + 0x80 + 10)
+#define	AT91_PIN_PE11	(PIN_BASE + 0x80 + 11)
+#define	AT91_PIN_PE12	(PIN_BASE + 0x80 + 12)
+#define	AT91_PIN_PE13	(PIN_BASE + 0x80 + 13)
+#define	AT91_PIN_PE14	(PIN_BASE + 0x80 + 14)
+#define	AT91_PIN_PE15	(PIN_BASE + 0x80 + 15)
+#define	AT91_PIN_PE16	(PIN_BASE + 0x80 + 16)
+#define	AT91_PIN_PE17	(PIN_BASE + 0x80 + 17)
+#define	AT91_PIN_PE18	(PIN_BASE + 0x80 + 18)
+#define	AT91_PIN_PE19	(PIN_BASE + 0x80 + 19)
+#define	AT91_PIN_PE20	(PIN_BASE + 0x80 + 20)
+#define	AT91_PIN_PE21	(PIN_BASE + 0x80 + 21)
+#define	AT91_PIN_PE22	(PIN_BASE + 0x80 + 22)
+#define	AT91_PIN_PE23	(PIN_BASE + 0x80 + 23)
+#define	AT91_PIN_PE24	(PIN_BASE + 0x80 + 24)
+#define	AT91_PIN_PE25	(PIN_BASE + 0x80 + 25)
+#define	AT91_PIN_PE26	(PIN_BASE + 0x80 + 26)
+#define	AT91_PIN_PE27	(PIN_BASE + 0x80 + 27)
+#define	AT91_PIN_PE28	(PIN_BASE + 0x80 + 28)
+#define	AT91_PIN_PE29	(PIN_BASE + 0x80 + 29)
+#define	AT91_PIN_PE30	(PIN_BASE + 0x80 + 30)
+#define	AT91_PIN_PE31	(PIN_BASE + 0x80 + 31)
+
+#ifndef __ASSEMBLY__
+/* setup setup routines, called from board init or driver probe() */
+extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
+extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
+extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
+
+/* callable at any time */
+extern int at91_set_gpio_value(unsigned pin, int value);
+extern int at91_get_gpio_value(unsigned pin);
+
+/* callable only from core power-management code */
+extern void at91_gpio_suspend(void);
+extern void at91_gpio_resume(void);
+
+/*-------------------------------------------------------------------------*/
+
+/* wrappers for "new style" GPIO calls. the old AT91-specfic ones should
+ * eventually be removed (along with this errno.h inclusion), and the
+ * gpio request/free calls should probably be implemented.
+ */
+
+#include <asm/errno.h>
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+}
+
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return at91_get_gpio_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	at91_set_gpio_value(gpio, value);
+}
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq;
+}
+
+#endif	/* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
new file mode 100644
index 000000000000..da0b681c652c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-at91/include/mach/hardware.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *  Copyright (C) 2003 ATMEL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+#if defined(CONFIG_ARCH_AT91RM9200)
+#include <mach/at91rm9200.h>
+#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
+#include <mach/at91sam9260.h>
+#elif defined(CONFIG_ARCH_AT91SAM9261)
+#include <mach/at91sam9261.h>
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+#include <mach/at91sam9263.h>
+#elif defined(CONFIG_ARCH_AT91SAM9RL)
+#include <mach/at91sam9rl.h>
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <mach/at91cap9.h>
+#elif defined(CONFIG_ARCH_AT91X40)
+#include <mach/at91x40.h>
+#else
+#error "Unsupported AT91 processor"
+#endif
+
+
+#ifdef CONFIG_MMU
+/*
+ * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
+ * to 0xFEF78000 .. 0xFF000000.  (544Kb)
+ */
+#define AT91_IO_PHYS_BASE	0xFFF78000
+#define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
+#else
+/*
+ * Identity mapping for the non MMU case.
+ */
+#define AT91_IO_PHYS_BASE	AT91_BASE_SYS
+#define AT91_IO_VIRT_BASE	AT91_IO_PHYS_BASE
+#endif
+
+#define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
+
+ /* Convert a physical IO address to virtual IO address */
+#define AT91_IO_P2V(x)		((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
+
+/*
+ * Virtual to Physical Address mapping for IO devices.
+ */
+#define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
+#define AT91_VA_BASE_EMAC	AT91_IO_P2V(AT91RM9200_BASE_EMAC)
+
+ /* Internal SRAM is mapped below the IO devices */
+#define AT91_SRAM_MAX		SZ_1M
+#define AT91_VIRT_BASE		(AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
+
+/* Serial ports */
+#define ATMEL_MAX_UART		7		/* 6 USART3's and one DBGU port (SAM9260) */
+
+/* External Memory Map */
+#define AT91_CHIPSELECT_0	0x10000000
+#define AT91_CHIPSELECT_1	0x20000000
+#define AT91_CHIPSELECT_2	0x30000000
+#define AT91_CHIPSELECT_3	0x40000000
+#define AT91_CHIPSELECT_4	0x50000000
+#define AT91_CHIPSELECT_5	0x60000000
+#define AT91_CHIPSELECT_6	0x70000000
+#define AT91_CHIPSELECT_7	0x80000000
+
+/* SDRAM */
+#ifdef CONFIG_DRAM_BASE
+#define AT91_SDRAM_BASE		CONFIG_DRAM_BASE
+#else
+#define AT91_SDRAM_BASE		AT91_CHIPSELECT_1
+#endif
+
+/* Clocks */
+#define AT91_SLOW_CLOCK		32768		/* slow clock */
+
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h
new file mode 100644
index 000000000000..1611bd03f528
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/io.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-at91/include/mach/io.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT		0xFFFFFFFF
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned int at91_sys_read(unsigned int reg_offset)
+{
+	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+	return __raw_readl(addr + reg_offset);
+}
+
+static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
+{
+	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+	__raw_writel(value, addr + reg_offset);
+}
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/irqs.h b/arch/arm/mach-at91/include/mach/irqs.h
new file mode 100644
index 000000000000..bda29ccbcd94
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/irqs.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-at91/include/mach/irqs.h
+ *
+ *  Copyright (C) 2004 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <asm/io.h>
+#include <mach/at91_aic.h>
+
+#define NR_AIC_IRQS 32
+
+
+/*
+ * Acknowledge interrupt with AIC after interrupt has been handled.
+ *   (by kernel/irq.c)
+ */
+#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
+
+
+/*
+ * IRQ interrupt symbols are the AT91xxx_ID_* symbols
+ * for IRQs handled directly through the AIC, or else the AT91_PIN_*
+ * symbols in gpio.h for ones handled indirectly as GPIOs.
+ * We make provision for 5 banks of GPIO.
+ */
+#define	NR_IRQS		(NR_AIC_IRQS + (5 * 32))
+
+/* FIQ is AIC source 0. */
+#define FIQ_START AT91_ID_FIQ
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h
new file mode 100644
index 000000000000..9dd1b8c79b08
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/memory.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-at91/include/mach/memory.h
+ *
+ *  Copyright (C) 2004 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+#define PHYS_OFFSET	(AT91_SDRAM_BASE)
+
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
new file mode 100644
index 000000000000..e712658d966c
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/system.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-at91/include/mach/system.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/at91_st.h>
+#include <mach/at91_dbgu.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * Disable the processor clock.  The processor will be automatically
+	 * re-enabled by an interrupt or by a reset.
+	 */
+//	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+
+	/*
+	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
+	 * Unlike disabling the processor clock via the PMC (above)
+	 *  this allows the processor to be woken via JTAG.
+	 */
+	cpu_do_idle();
+}
+
+void (*at91_arch_reset)(void);
+
+static inline void arch_reset(char mode)
+{
+	/* call the CPU-specific reset function */
+	if (at91_arch_reset)
+		(at91_arch_reset)();
+}
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
new file mode 100644
index 000000000000..d84c9948becf
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -0,0 +1,77 @@
+/*
+ * arch/arm/mach-at91/include/mach/timex.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#include <mach/hardware.h>
+
+#if defined(CONFIG_ARCH_AT91RM9200)
+
+#define CLOCK_TICK_RATE		(AT91_SLOW_CLOCK)
+
+#elif defined(CONFIG_ARCH_AT91SAM9260)
+
+#if defined(CONFIG_MACH_USB_A9260) || defined(CONFIG_MACH_QIL_A9260)
+#define AT91SAM9_MASTER_CLOCK	90000000
+#else
+#define AT91SAM9_MASTER_CLOCK	99300000
+#endif
+
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9261)
+
+#define AT91SAM9_MASTER_CLOCK	99300000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+
+#if defined(CONFIG_MACH_USB_A9263)
+#define AT91SAM9_MASTER_CLOCK	90000000
+#else
+#define AT91SAM9_MASTER_CLOCK	99959500
+#endif
+
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9RL)
+
+#define AT91SAM9_MASTER_CLOCK	100000000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91SAM9G20)
+
+#define AT91SAM9_MASTER_CLOCK	132096000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91CAP9)
+
+#define AT91CAP9_MASTER_CLOCK	100000000
+#define CLOCK_TICK_RATE		(AT91CAP9_MASTER_CLOCK/16)
+
+#elif defined(CONFIG_ARCH_AT91X40)
+
+#define AT91X40_MASTER_CLOCK	40000000
+#define CLOCK_TICK_RATE		(AT91X40_MASTER_CLOCK)
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
new file mode 100644
index 000000000000..0410d548e9b1
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/mach-at91/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+#include <linux/atmel_serial.h>
+
+#if defined(CONFIG_AT91_EARLY_DBGU)
+#define UART_OFFSET (AT91_DBGU + AT91_BASE_SYS)
+#elif defined(CONFIG_AT91_EARLY_USART0)
+#define UART_OFFSET AT91_USART0
+#elif defined(CONFIG_AT91_EARLY_USART1)
+#define UART_OFFSET AT91_USART1
+#elif defined(CONFIG_AT91_EARLY_USART2)
+#define UART_OFFSET AT91_USART2
+#elif defined(CONFIG_AT91_EARLY_USART3)
+#define UART_OFFSET AT91_USART3
+#elif defined(CONFIG_AT91_EARLY_USART4)
+#define UART_OFFSET AT91_USART4
+#elif defined(CONFIG_AT91_EARLY_USART5)
+#define UART_OFFSET AT91_USART5
+#endif
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+#ifdef UART_OFFSET
+	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
+
+	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXRDY))
+		barrier();
+	__raw_writel(c, sys + ATMEL_US_THR);
+#endif
+}
+
+static inline void flush(void)
+{
+#ifdef UART_OFFSET
+	void __iomem *sys = (void __iomem *) UART_OFFSET;	/* physical address */
+
+	/* wait for transmission to complete */
+	while (!(__raw_readl(sys + ATMEL_US_CSR) & ATMEL_US_TXEMPTY))
+		barrier();
+#endif
+}
+
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-at91/include/mach/vmalloc.h b/arch/arm/mach-at91/include/mach/vmalloc.h
new file mode 100644
index 000000000000..8eb459f3f5b7
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/vmalloc.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-at91/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
+
+#endif
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index 78a5cdb746dc..da3494a53423 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -25,9 +25,8 @@
 #include <linux/mm.h>
 #include <linux/types.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/mach-types.h>
 #include <asm/setup.h>
 
 #include <asm/mach/arch.h>
@@ -56,19 +55,19 @@ static int at91_aic_set_type(unsigned irq, unsigned type)
 	unsigned int smr, srctype;
 
 	switch (type) {
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		srctype = AT91_AIC_SRCTYPE_HIGH;
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		srctype = AT91_AIC_SRCTYPE_RISING;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
 			srctype = AT91_AIC_SRCTYPE_LOW;
 		else
 			return -EINVAL;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		if ((irq == AT91_ID_FIQ) || is_extern_irq(irq))		/* only supported on external interrupts */
 			srctype = AT91_AIC_SRCTYPE_FALLING;
 		else
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 9cdcda500fe8..fec03c59ff94 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -13,9 +13,8 @@
 #include <linux/module.h>
 #include <linux/init.h>
 
-#include <asm/mach-types.h>
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 
 /* ------------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 8ab4feb1ec5b..ec2fe4ca1e27 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -23,16 +23,15 @@
 #include <asm/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/mach-types.h>
 
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
+#include <mach/at91_pmc.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include "generic.h"
 
 #ifdef CONFIG_ARCH_AT91RM9200
-#include <asm/arch/at91rm9200_mc.h>
+#include <mach/at91rm9200_mc.h>
 
 /*
  * The AT91RM9200 goes into self-refresh mode with this command, and will
@@ -42,7 +41,7 @@
 #define sdram_selfrefresh_disable()	do {} while (0)
 
 #elif defined(CONFIG_ARCH_AT91CAP9)
-#include <asm/arch/at91cap9_ddrsdr.h>
+#include <mach/at91cap9_ddrsdr.h>
 
 static u32 saved_lpr;
 
@@ -59,7 +58,7 @@ static inline void sdram_selfrefresh_enable(void)
 #define sdram_selfrefresh_disable()	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
 
 #else
-#include <asm/arch/at91sam9_sdramc.h>
+#include <mach/at91sam9_sdramc.h>
 
 #ifdef CONFIG_ARCH_AT91SAM9263
 /*
@@ -92,8 +91,8 @@ static inline void sdram_selfrefresh_enable(void)
  */
 #if defined(AT91_SHDWC)
 
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/at91_shdwc.h>
+#include <mach/at91_rstc.h>
+#include <mach/at91_shdwc.h>
 
 static void __init show_reset_status(void)
 {
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index c13ca6c56baa..474616dcd7a6 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
 #include <asm/io.h>
 #include <asm/setup.h>
@@ -33,7 +33,7 @@
 #include <asm/page.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/autcpu12.h>
+#include <mach/autcpu12.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 831df007f6c7..aa02aa5a01f4 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index e2b2c5ac8a83..8ada20184978 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -27,7 +27,7 @@
 
 #include <linux/kernel.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/sizes.h>
diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c
index 0d52e0851251..c58e32ec4c5d 100644
--- a/arch/arm/mach-clps711x/edb7211-mm.c
+++ b/arch/arm/mach-clps711x/edb7211-mm.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/sizes.h>
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index 3792ab4f0996..7122b3d21043 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -23,7 +23,7 @@
 #include <linux/init.h>
 #include <linux/initrd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-clps711x/include/mach/autcpu12.h b/arch/arm/mach-clps711x/include/mach/autcpu12.h
new file mode 100644
index 000000000000..1588a365f610
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/autcpu12.h
@@ -0,0 +1,78 @@
+/*
+ * AUTCPU12 specific defines
+ *
+ * (c) 2001 Thomas Gleixner, autronix automation <gleixner@autronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_AUTCPU12_H
+#define __ASM_ARCH_AUTCPU12_H
+
+/*
+ * The CS8900A ethernet chip has its I/O registers wired to chip select 2
+ * (nCS2). This is the mapping for it.
+ */
+#define AUTCPU12_PHYS_CS8900A		CS2_PHYS_BASE		/* physical */
+#define AUTCPU12_VIRT_CS8900A		(0xfe000000)		/* virtual */
+
+/*
+ * The flash bank is wired to chip select 0
+ */
+#define AUTCPU12_PHYS_FLASH		CS0_PHYS_BASE		/* physical */
+
+/* offset for device specific information structure */
+#define AUTCPU12_LCDINFO_OFFS		(0x00010000)	
+/*
+* Videomemory is the internal SRAM (CS 6)	
+*/
+#define AUTCPU12_PHYS_VIDEO		CS6_PHYS_BASE
+#define AUTCPU12_VIRT_VIDEO		(0xfd000000)
+
+/*
+* All special IO's are tied to CS1
+*/
+#define AUTCPU12_PHYS_CHAR_LCD         	CS1_PHYS_BASE +0x00000000  /* physical */
+
+#define AUTCPU12_PHYS_NVRAM            	CS1_PHYS_BASE +0x02000000  /* physical */
+
+#define AUTCPU12_PHYS_CSAUX1           	CS1_PHYS_BASE +0x04000000  /* physical */
+
+#define AUTCPU12_PHYS_SMC              	CS1_PHYS_BASE +0x06000000  /* physical */
+
+#define AUTCPU12_PHYS_CAN              	CS1_PHYS_BASE +0x08000000  /* physical */
+
+#define AUTCPU12_PHYS_TOUCH            	CS1_PHYS_BASE +0x0A000000  /* physical */
+
+#define AUTCPU12_PHYS_IO               	CS1_PHYS_BASE +0x0C000000  /* physical */
+
+#define AUTCPU12_PHYS_LPT              	CS1_PHYS_BASE +0x0E000000  /* physical */
+
+/* 
+* defines for smartmedia card access 
+*/
+#define AUTCPU12_SMC_RDY		(1<<2)
+#define AUTCPU12_SMC_ALE		(1<<3)
+#define AUTCPU12_SMC_CLE  		(1<<4)
+#define AUTCPU12_SMC_PORT_OFFSET	PBDR
+#define AUTCPU12_SMC_SELECT_OFFSET 	0x10
+/*
+* defines for lcd contrast 
+*/
+#define AUTCPU12_DPOT_PORT_OFFSET	PEDR
+#define	AUTCPU12_DPOT_CS		(1<<0)
+#define AUTCPU12_DPOT_CLK    		(1<<1)
+#define	AUTCPU12_DPOT_UD		(1<<2)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
new file mode 100644
index 000000000000..64baf9f87408
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -0,0 +1,46 @@
+/* arch/arm/mach-clps711x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware/clps7111.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #CLPS7111_PHYS_BASE
+		movne	\rx, #CLPS7111_VIRT_BASE
+#ifndef CONFIG_DEBUG_CLPS711X_UART2
+		add	\rx, \rx, #0x0000	@ UART1
+#else
+		add	\rx, \rx, #0x1000	@ UART2
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x0480]	@ UARTDR
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
+		tst	\rd, #1 << 11		@ UBUSYx
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+		tst	\rx, #0x1000		@ UART2 does not have CTS here
+		bne	1002f
+1001:		ldr	\rd, [\rx, #0x0140]	@ SYSFLGx
+		tst	\rd, #1 << 8		@ CTS
+		bne	1001b
+1002:
+		.endm
+
diff --git a/arch/arm/mach-clps711x/include/mach/dma.h b/arch/arm/mach-clps711x/include/mach/dma.h
new file mode 100644
index 000000000000..0d620e869536
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/dma.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-clps711x/include/mach/entry-macro.S b/arch/arm/mach-clps711x/include/mach/entry-macro.S
new file mode 100644
index 000000000000..90fa2f70489f
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/entry-macro.S
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-clps711x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for CLPS711X-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro	arch_ret_to_user, tmp1, tmp2
+		.endm
+
+#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
+#error INTSR stride != INTMR stride
+#endif
+
+		.macro	get_irqnr_and_base, irqnr, stat, base, mask
+		mov	\base, #CLPS7111_BASE
+		ldr	\stat, [\base, #INTSR1]
+		ldr	\mask, [\base, #INTMR1]
+		mov	\irqnr, #4
+		mov	\mask, \mask, lsl #16
+		and	\stat, \stat, \mask, lsr #16
+		movs	\stat, \stat, lsr #4
+		bne	1001f
+
+		add	\base, \base, #INTSR2 - INTSR1
+		ldr	\stat, [\base, #INTSR1]
+		ldr	\mask, [\base, #INTMR1]
+		mov	\irqnr, #16
+		mov	\mask, \mask, lsl #16
+		and	\stat, \stat, \mask, lsr #16
+
+1001:		tst	\stat, #255
+		addeq	\irqnr, \irqnr, #8
+		moveq	\stat, \stat, lsr #8
+		tst	\stat, #15
+		addeq	\irqnr, \irqnr, #4
+		moveq	\stat, \stat, lsr #4
+		tst	\stat, #3
+		addeq	\irqnr, \irqnr, #2
+		moveq	\stat, \stat, lsr #2
+		tst	\stat, #1
+		addeq	\irqnr, \irqnr, #1
+		moveq	\stat, \stat, lsr #1
+		tst	\stat, #1			@ bit 0 should be set
+		.endm
+
+
diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h
new file mode 100644
index 000000000000..4c3e101b96c9
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/hardware.h
@@ -0,0 +1,237 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the Prospector P720T.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+
+#define CLPS7111_VIRT_BASE	0xff000000
+#define CLPS7111_BASE		CLPS7111_VIRT_BASE
+
+/*
+ * The physical addresses that the external chip select signals map to is
+ * dependent on the setting of the nMEDCHG signal on EP7211 and EP7212
+ * processors.  CONFIG_EP72XX_BOOT_ROM is only available if these
+ * processors are in use.
+ */
+#ifndef CONFIG_EP72XX_ROM_BOOT
+#define CS0_PHYS_BASE		(0x00000000)
+#define CS1_PHYS_BASE		(0x10000000)
+#define CS2_PHYS_BASE		(0x20000000)
+#define CS3_PHYS_BASE		(0x30000000)
+#define CS4_PHYS_BASE		(0x40000000)
+#define CS5_PHYS_BASE		(0x50000000)
+#define CS6_PHYS_BASE		(0x60000000)
+#define CS7_PHYS_BASE		(0x70000000)
+#else
+#define CS0_PHYS_BASE		(0x70000000)
+#define CS1_PHYS_BASE		(0x60000000)
+#define CS2_PHYS_BASE		(0x50000000)
+#define CS3_PHYS_BASE		(0x40000000)
+#define CS4_PHYS_BASE		(0x30000000)
+#define CS5_PHYS_BASE		(0x20000000)
+#define CS6_PHYS_BASE		(0x10000000)
+#define CS7_PHYS_BASE		(0x00000000)
+#endif
+
+#if defined (CONFIG_ARCH_EP7211)
+
+#define EP7211_VIRT_BASE	CLPS7111_VIRT_BASE
+#define EP7211_BASE		CLPS7111_VIRT_BASE
+#include <asm/hardware/ep7211.h>
+
+#elif defined (CONFIG_ARCH_EP7212)
+
+#define EP7212_VIRT_BASE	CLPS7111_VIRT_BASE
+#define EP7212_BASE		CLPS7111_VIRT_BASE
+#include <asm/hardware/ep7212.h>
+
+#endif
+
+#define SYSPLD_VIRT_BASE	0xfe000000
+#define SYSPLD_BASE		SYSPLD_VIRT_BASE
+
+#ifndef __ASSEMBLER__
+
+#define PCIO_BASE		IO_BASE
+
+#endif
+
+
+#if  defined (CONFIG_ARCH_AUTCPU12)
+
+#define  CS89712_VIRT_BASE	CLPS7111_VIRT_BASE
+#define  CS89712_BASE		CLPS7111_VIRT_BASE
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+#include <asm/hardware/cs89712.h>
+
+#endif
+
+
+#if defined (CONFIG_ARCH_CDB89712)
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+#include <asm/hardware/cs89712.h>
+
+/* dynamic ioremap() areas */
+#define FLASH_START      0x00000000
+#define FLASH_SIZE       0x800000
+#define FLASH_WIDTH      4
+
+#define SRAM_START       0x60000000
+#define SRAM_SIZE        0xc000
+#define SRAM_WIDTH       4
+
+#define BOOTROM_START    0x70000000
+#define BOOTROM_SIZE     0x80
+#define BOOTROM_WIDTH    4
+
+
+/* static cdb89712_map_io() areas */
+#define REGISTER_START   0x80000000
+#define REGISTER_SIZE    0x4000
+#define REGISTER_BASE    0xff000000
+
+#define ETHER_START      0x20000000
+#define ETHER_SIZE       0x1000
+#define ETHER_BASE       0xfe000000
+
+#endif
+
+
+#if defined (CONFIG_ARCH_EDB7211)
+
+/*
+ * The extra 8 lines of the keyboard matrix are wired to chip select 3 (nCS3) 
+ * and repeat across it. This is the mapping for it.
+ *
+ * In jumpered boot mode, nCS3 is mapped to 0x4000000, not 0x3000000. This 
+ * was cause for much consternation and headscratching. This should probably
+ * be made a compile/run time kernel option.
+ */
+#define EP7211_PHYS_EXTKBD		CS3_PHYS_BASE	/* physical */
+
+#define EP7211_VIRT_EXTKBD		(0xfd000000)	/* virtual */
+
+
+/*
+ * The CS8900A ethernet chip has its I/O registers wired to chip select 2 
+ * (nCS2). This is the mapping for it.
+ *
+ * In jumpered boot mode, nCS2 is mapped to 0x5000000, not 0x2000000. This 
+ * was cause for much consternation and headscratching. This should probably
+ * be made a compile/run time kernel option.
+ */
+#define EP7211_PHYS_CS8900A		CS2_PHYS_BASE	/* physical */
+
+#define EP7211_VIRT_CS8900A		(0xfc000000)	/* virtual */
+
+
+/*
+ * The two flash banks are wired to chip selects 0 and 1. This is the mapping
+ * for them.
+ *
+ * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
+ * in jumpered boot mode.
+ */
+#define EP7211_PHYS_FLASH1		CS0_PHYS_BASE	/* physical */
+#define EP7211_PHYS_FLASH2		CS1_PHYS_BASE	/* physical */
+
+#define EP7211_VIRT_FLASH1		(0xfa000000)	/* virtual */
+#define EP7211_VIRT_FLASH2		(0xfb000000)	/* virtual */
+
+#endif /* CONFIG_ARCH_EDB7211 */
+
+
+/*
+ * Relevant bits in port D, which controls power to the various parts of
+ * the LCD on the EDB7211.
+ */
+#define EDB_PD1_LCD_DC_DC_EN	(1<<1)
+#define EDB_PD2_LCDEN		(1<<2)
+#define EDB_PD3_LCDBL		(1<<3)
+
+
+#if defined (CONFIG_ARCH_CEIVA)
+
+#define  CEIVA_VIRT_BASE	CLPS7111_VIRT_BASE
+#define  CEIVA_BASE		CLPS7111_VIRT_BASE
+
+#include <asm/hardware/clps7111.h>
+#include <asm/hardware/ep7212.h>
+
+
+/*
+ * The two flash banks are wired to chip selects 0 and 1. This is the mapping
+ * for them.
+ *
+ * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running
+ * in jumpered boot mode.
+ */
+#define CEIVA_PHYS_FLASH1	CS0_PHYS_BASE	/* physical */
+#define CEIVA_PHYS_FLASH2	CS1_PHYS_BASE	/* physical */
+
+#define CEIVA_VIRT_FLASH1	(0xfa000000)	/* virtual */
+#define CEIVA_VIRT_FLASH2	(0xfb000000)	/* virtual */
+
+#define CEIVA_FLASH_SIZE        0x100000
+#define CEIVA_FLASH_WIDTH       2
+
+#define SRAM_START       0x60000000
+#define SRAM_SIZE        0xc000
+#define SRAM_WIDTH       4
+
+#define BOOTROM_START    0x70000000
+#define BOOTROM_SIZE     0x80
+#define BOOTROM_WIDTH    4
+
+/*
+ * SED1355 LCD controller
+ */
+#define CEIVA_PHYS_SED1355	CS2_PHYS_BASE
+#define CEIVA_VIRT_SED1355	(0xfc000000)
+
+/*
+ * Relevant bits in port D, which controls power to the various parts of
+ * the LCD on the Ceiva Photo Max, and reset to the LCD controller.
+ */
+
+// Reset line to SED1355 (must be high to operate)
+#define CEIVA_PD1_LCDRST	(1<<1)
+// LCD panel enable (set to one, to enable LCD)
+#define CEIVA_PD4_LCDEN		(1<<4)
+// Backlight (set to one, to turn on backlight
+#define CEIVA_PD5_LCDBL		(1<<5)
+
+/*
+ * Relevant bits in port B, which report the status of the buttons.
+ */
+
+// White button
+#define CEIVA_PB4_WHT_BTN	(1<<4)
+// Black button
+#define CEIVA_PB0_BLK_BTN	(1<<0)
+#endif // #if defined (CONFIG_ARCH_CEIVA)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/io.h b/arch/arm/mach-clps711x/include/mach/io.h
new file mode 100644
index 000000000000..4c8440087679
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/io.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/io.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+/*
+ * We don't support ins[lb]/outs[lb].  Make them fault.
+ */
+#define __raw_readsb(p,d,l)	do { *(int *)0 = 0; } while (0)
+#define __raw_readsl(p,d,l)	do { *(int *)0 = 0; } while (0)
+#define __raw_writesb(p,d,l)	do { *(int *)0 = 0; } while (0)
+#define __raw_writesl(p,d,l)	do { *(int *)0 = 0; } while (0)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/irqs.h b/arch/arm/mach-clps711x/include/mach/irqs.h
new file mode 100644
index 000000000000..30b7e97285a4
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/irqs.h
@@ -0,0 +1,53 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/irqs.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Interrupts from INTSR1
+ */
+#define IRQ_CSINT			4
+#define IRQ_EINT1			5
+#define IRQ_EINT2			6
+#define IRQ_EINT3			7
+#define IRQ_TC1OI			8
+#define IRQ_TC2OI			9
+#define IRQ_RTCMI			10
+#define IRQ_TINT			11
+#define IRQ_UTXINT1			12
+#define IRQ_URXINT1			13
+#define IRQ_UMSINT			14
+#define IRQ_SSEOTI			15
+
+#define INT1_IRQS			(0x0000fff0)
+#define INT1_ACK_IRQS			(0x00004f10)
+
+/*
+ * Interrupts from INTSR2
+ */
+#define IRQ_KBDINT			(16+0)	/* bit 0 */
+#define IRQ_SS2RX			(16+1)	/* bit 1 */
+#define IRQ_SS2TX			(16+2)	/* bit 2 */
+#define IRQ_UTXINT2			(16+12)	/* bit 12 */
+#define IRQ_URXINT2			(16+13)	/* bit 13 */
+
+#define INT2_IRQS			(0x30070000)
+#define INT2_ACK_IRQS			(0x00010000)
+
+#define NR_IRQS                         30
+
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
new file mode 100644
index 000000000000..71c2fa70c8e8
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -0,0 +1,94 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0xc0000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+
+#if defined(CONFIG_ARCH_CDB89712)
+
+#define __virt_to_bus(x)	(x)
+#define __bus_to_virt(x)	(x)
+
+#elif defined (CONFIG_ARCH_AUTCPU12)
+
+#define __virt_to_bus(x)	(x)
+#define __bus_to_virt(x)	(x)
+
+#else
+
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
+#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+
+#endif
+
+
+/*
+ * Like the SA1100, the EDB7211 has a large gap between physical RAM
+ * banks.  In 2.2, the Psion (CL-PS7110) port added custom support for
+ * discontiguous physical memory.  In 2.4, we can use the standard
+ * Linux NUMA support.
+ *
+ * This is not necessary for EP7211 implementations with only one used
+ * memory bank.  For those systems, simply undefine CONFIG_DISCONTIGMEM.
+ */
+
+/*
+ * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211
+ * uses only one of the two banks (bank #1).  However, even within
+ * bank #1, memory is discontiguous.
+ *
+ * The EDB7211 has two 8MB DRAM areas with 8MB of empty space between
+ * them, so we use 24 for the node max shift to get 16MB node sizes.
+ */
+
+/*
+ * Because of the wide memory address space between physical RAM banks on the 
+ * SA1100, it's much more convenient to use Linux's NUMA support to implement
+ * our memory map representation.  Assuming all memory nodes have equal access 
+ * characteristics, we then have generic discontiguous memory support.
+ *
+ * Of course, all this isn't mandatory for SA1100 implementations with only
+ * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
+ *
+ * The nodes are matched with the physical memory bank addresses which are 
+ * incidentally the same as virtual addresses.
+ * 
+ * 	node 0:  0xc0000000 - 0xc7ffffff
+ * 	node 1:  0xc8000000 - 0xcfffffff
+ * 	node 2:  0xd0000000 - 0xd7ffffff
+ * 	node 3:  0xd8000000 - 0xdfffffff
+ */
+#define NODE_MEM_SIZE_BITS	24
+
+#endif
+
diff --git a/arch/arm/mach-clps711x/include/mach/syspld.h b/arch/arm/mach-clps711x/include/mach/syspld.h
new file mode 100644
index 000000000000..f7f4c1201898
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/syspld.h
@@ -0,0 +1,121 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/syspld.h
+ *
+ *  System Control PLD register definitions.
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSPLD_H
+#define __ASM_ARCH_SYSPLD_H
+
+#define SYSPLD_PHYS_BASE	(0x10000000)
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+#define SYSPLD_REG(type,off)	(*(volatile type *)(SYSPLD_BASE + off))
+#else
+#define SYSPLD_REG(type,off)	(off)
+#endif
+
+#define PLD_INT		SYSPLD_REG(u32, 0x000000)
+#define PLD_INT_PENIRQ		(1 << 5)
+#define PLD_INT_UCB_IRQ		(1 << 1)
+#define PLD_INT_KBD_ATN		(1 << 0)	/* EINT1 */
+
+#define PLD_PWR		SYSPLD_REG(u32, 0x000004)
+#define PLD_PWR_EXT		(1 << 5)
+#define PLD_PWR_MODE		(1 << 4)	/* 1 = PWM, 0 = PFM */
+#define PLD_S4_ON		(1 << 3)	/* LCD bias voltage enable */
+#define PLD_S3_ON		(1 << 2)	/* LCD backlight enable */
+#define PLD_S2_ON		(1 << 1)	/* LCD 3V3 supply enable */
+#define PLD_S1_ON		(1 << 0)	/* LCD 3V supply enable */
+
+#define PLD_KBD		SYSPLD_REG(u32, 0x000008)
+#define PLD_KBD_WAKE		(1 << 1)
+#define PLD_KBD_EN		(1 << 0)
+
+#define PLD_SPI		SYSPLD_REG(u32, 0x00000c)
+#define PLD_SPI_EN		(1 << 0)
+
+#define PLD_IO		SYSPLD_REG(u32, 0x000010)
+#define PLD_IO_BOOTSEL		(1 << 6)	/* boot sel switch */
+#define PLD_IO_USER		(1 << 5)	/* user defined switch */
+#define PLD_IO_LED3		(1 << 4)
+#define PLD_IO_LED2		(1 << 3)
+#define PLD_IO_LED1		(1 << 2)
+#define PLD_IO_LED0		(1 << 1)
+#define PLD_IO_LEDEN		(1 << 0)
+
+#define PLD_IRDA	SYSPLD_REG(u32, 0x000014)
+#define PLD_IRDA_EN		(1 << 0)
+
+#define PLD_COM2	SYSPLD_REG(u32, 0x000018)
+#define PLD_COM2_EN		(1 << 0)
+
+#define PLD_COM1	SYSPLD_REG(u32, 0x00001c)
+#define PLD_COM1_EN		(1 << 0)
+
+#define PLD_AUD		SYSPLD_REG(u32, 0x000020)
+#define PLD_AUD_DIV1		(1 << 6)
+#define PLD_AUD_DIV0		(1 << 5)
+#define PLD_AUD_CLK_SEL1	(1 << 4)
+#define PLD_AUD_CLK_SEL0	(1 << 3)
+#define PLD_AUD_MIC_PWR		(1 << 2)
+#define PLD_AUD_MIC_GAIN	(1 << 1)
+#define PLD_AUD_CODEC_EN	(1 << 0)
+
+#define PLD_CF		SYSPLD_REG(u32, 0x000024)
+#define PLD_CF2_SLEEP		(1 << 5)
+#define PLD_CF1_SLEEP		(1 << 4)
+#define PLD_CF2_nPDREQ		(1 << 3)
+#define PLD_CF1_nPDREQ		(1 << 2)
+#define PLD_CF2_nIRQ		(1 << 1)
+#define PLD_CF1_nIRQ		(1 << 0)
+
+#define PLD_SDC		SYSPLD_REG(u32, 0x000028)
+#define PLD_SDC_INT_EN		(1 << 2)
+#define PLD_SDC_WP		(1 << 1)
+#define PLD_SDC_CD		(1 << 0)
+
+#define PLD_FPGA	SYSPLD_REG(u32, 0x00002c)
+
+#define PLD_CODEC	SYSPLD_REG(u32, 0x400000)
+#define PLD_CODEC_IRQ3		(1 << 4)
+#define PLD_CODEC_IRQ2		(1 << 3)
+#define PLD_CODEC_IRQ1		(1 << 2)
+#define PLD_CODEC_EN		(1 << 0)
+
+#define PLD_BRITE	SYSPLD_REG(u32, 0x400004)
+#define PLD_BRITE_UP		(1 << 1)
+#define PLD_BRITE_DN		(1 << 0)
+
+#define PLD_LCDEN	SYSPLD_REG(u32, 0x400008)
+#define PLD_LCDEN_EN		(1 << 0)
+
+#define PLD_ID		SYSPLD_REG(u32, 0x40000c)
+
+#define PLD_TCH		SYSPLD_REG(u32, 0x400010)
+#define PLD_TCH_PENIRQ		(1 << 1)
+#define PLD_TCH_EN		(1 << 0)
+
+#define PLD_GPIO	SYSPLD_REG(u32, 0x400014)
+#define PLD_GPIO2		(1 << 2)
+#define PLD_GPIO1		(1 << 1)
+#define PLD_GPIO0		(1 << 0)
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
new file mode 100644
index 000000000000..a8eade40317f
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/system.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/system.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+#include <asm/io.h>
+
+static inline void arch_idle(void)
+{
+	clps_writel(1, HALT);
+	__asm__ __volatile__(
+	"mov	r0, r0\n\
+	mov	r0, r0");
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/time.h b/arch/arm/mach-clps711x/include/mach/time.h
new file mode 100644
index 000000000000..8fe283ccd1f3
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/time.h
@@ -0,0 +1,49 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/time.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <asm/leds.h>
+#include <asm/hardware/clps7111.h>
+
+extern void clps711x_setup_timer(void);
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t
+p720t_timer_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	do_leds();
+	do_timer(1);
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+	do_profile(regs);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set up timer interrupt, and return the current time in seconds.
+ */
+void __init time_init(void)
+{
+	clps711x_setup_timer();
+	timer_irq.handler = p720t_timer_interrupt;
+	setup_irq(IRQ_TC2OI, &timer_irq);
+}
diff --git a/arch/arm/mach-clps711x/include/mach/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h
new file mode 100644
index 000000000000..ac8823ccff93
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/timex.h
+ *
+ *  Prospector 720T architecture timex specifications
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE 512000
diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h
new file mode 100644
index 000000000000..7164310dea7c
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/uncompress.h
@@ -0,0 +1,59 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <mach/io.h>
+#include <mach/hardware.h>
+#include <asm/hardware/clps7111.h>
+
+#undef CLPS7111_BASE
+#define CLPS7111_BASE CLPS7111_PHYS_BASE
+
+#define __raw_readl(p)		(*(unsigned long *)(p))
+#define __raw_writel(v,p)	(*(unsigned long *)(p) = (v))
+
+#ifdef CONFIG_DEBUG_CLPS711X_UART2
+#define SYSFLGx	SYSFLG2
+#define UARTDRx	UARTDR2
+#else
+#define SYSFLGx	SYSFLG1
+#define UARTDRx	UARTDR1
+#endif
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	while (clps_readl(SYSFLGx) & SYSFLG_UTXFF)
+		barrier();
+	clps_writel(c, UARTDRx);
+}
+
+static inline void flush(void)
+{
+	while (clps_readl(SYSFLGx) & SYSFLG_UBUSY)
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-clps711x/include/mach/vmalloc.h b/arch/arm/mach-clps711x/include/mach/vmalloc.h
new file mode 100644
index 000000000000..ea6cc7beff28
--- /dev/null
+++ b/arch/arm/mach-clps711x/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-clps711x/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-clps711x/irq.c b/arch/arm/mach-clps711x/irq.c
index ca102960f528..38623cfcac5a 100644
--- a/arch/arm/mach-clps711x/irq.c
+++ b/arch/arm/mach-clps711x/irq.c
@@ -21,7 +21,7 @@
 #include <linux/list.h>
 
 #include <asm/mach/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c
index a00f77ef8df8..a7b4591205a3 100644
--- a/arch/arm/mach-clps711x/mm.c
+++ b/arch/arm/mach-clps711x/mm.c
@@ -25,7 +25,7 @@
 #include <linux/bootmem.h>
 
 #include <asm/sizes.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c
index 4915b3524963..262c3c361453 100644
--- a/arch/arm/mach-clps711x/p720t-leds.c
+++ b/arch/arm/mach-clps711x/p720t-leds.c
@@ -22,7 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index c8ecd2480c27..f51f97d4f212 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -23,7 +23,7 @@
 #include <linux/string.h>
 #include <linux/mm.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/syspld.h>
+#include <mach/syspld.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-clps711x/time.c b/arch/arm/mach-clps711x/time.c
index e5dc33f1f95c..ef1fcd17189e 100644
--- a/arch/arm/mach-clps711x/time.c
+++ b/arch/arm/mach-clps711x/time.c
@@ -22,7 +22,7 @@
 #include <linux/irq.h>
 #include <linux/sched.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
 #include <asm/io.h>
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index 2ac63671ea5f..cc1b82179e83 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -21,7 +21,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
 #include <asm/io.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-clps7500/include/mach/acornfb.h b/arch/arm/mach-clps7500/include/mach/acornfb.h
new file mode 100644
index 000000000000..aea6330c9745
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/acornfb.h
@@ -0,0 +1,33 @@
+#define acornfb_valid_pixrate(var) (var->pixclock >= 39325 && var->pixclock <= 40119)
+
+static inline void
+acornfb_vidc20_find_rates(struct vidc_timing *vidc,
+			  struct fb_var_screeninfo *var)
+{
+	u_int bandwidth;
+  
+	vidc->control |= VIDC20_CTRL_PIX_CK;
+
+	/* Calculate bandwidth */
+	bandwidth = var->pixclock * 8 / var->bits_per_pixel;
+
+	/* Encode bandwidth as VIDC20 setting */
+	if (bandwidth > 16667*2)
+		vidc->control |= VIDC20_CTRL_FIFO_16;
+	else if (bandwidth > 13333*2)
+		vidc->control |= VIDC20_CTRL_FIFO_20;
+	else if (bandwidth > 11111*2)
+		vidc->control |= VIDC20_CTRL_FIFO_24;
+	else
+		vidc->control |= VIDC20_CTRL_FIFO_28;
+
+	vidc->pll_ctl  = 0x2020;
+}
+
+#ifdef CONFIG_CHRONTEL_7003
+#define acornfb_default_control()	VIDC20_CTRL_PIX_HCLK
+#else
+#define acornfb_default_control()	VIDC20_CTRL_PIX_VCLK
+#endif
+
+#define acornfb_default_econtrol()	VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3) | VIDC20_ECTL_ECK
diff --git a/arch/arm/mach-clps7500/include/mach/debug-macro.S b/arch/arm/mach-clps7500/include/mach/debug-macro.S
new file mode 100644
index 000000000000..af4104e7e84a
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/debug-macro.S
@@ -0,0 +1,21 @@
+/* arch/arm/mach-clps7500/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mov	\rx, #0xe0000000
+		orr	\rx, \rx, #0x00010000
+		orr	\rx, \rx, #0x00000be0
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-clps7500/include/mach/dma.h b/arch/arm/mach-clps7500/include/mach/dma.h
new file mode 100644
index 000000000000..63fcde505498
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/dma.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/dma.h
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd.
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS		0xd0000000
+
+#define DMA_S0			0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-clps7500/include/mach/entry-macro.S b/arch/arm/mach-clps7500/include/mach/entry-macro.S
new file mode 100644
index 000000000000..4e7e54144093
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/entry-macro.S
@@ -0,0 +1,16 @@
+#include <mach/hardware.h>
+#include <asm/hardware/entry-macro-iomd.S>
+
+	.equ	ioc_base_high, IOC_BASE & 0xff000000
+	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
+
+	.macro  get_irqnr_preamble, base, tmp
+	mov	\base, #ioc_base_high		@ point at IOC
+	.if	ioc_base_low
+	orr	\base, \base, #ioc_base_low
+	.endif
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
diff --git a/arch/arm/mach-clps7500/include/mach/hardware.h b/arch/arm/mach-clps7500/include/mach/hardware.h
new file mode 100644
index 000000000000..d66578a3371c
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/hardware.h
@@ -0,0 +1,67 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/hardware.h
+ *
+ * Copyright (C) 1996-1999 Russell King.
+ * Copyright (C) 1999 Nexus Electronics Ltd.
+ *
+ * This file contains the hardware definitions of the 
+ * CL7500 evaluation board.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/memory.h>
+#include <asm/hardware/iomd.h>
+
+#ifdef __ASSEMBLY__
+#define IOMEM(x) x
+#else
+#define IOMEM(x) ((void __iomem *)(x))
+#endif
+
+/*
+ * What hardware must be present
+ */
+#define HAS_IOMD
+#define HAS_VIDC20
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+
+#define IO_START		0x03000000	/* I/O */
+#define IO_SIZE			0x01000000
+#define IO_BASE			IOMEM(0xe0000000)
+
+#define ISA_START		0x0c000000	/* ISA */
+#define ISA_SIZE		0x00010000
+#define ISA_BASE		0xe1000000
+
+#define FLASH_START		0x01000000	/* XXX */
+#define FLASH_SIZE		0x01000000
+#define FLASH_BASE		0xe2000000
+
+#define LED_START		0x0302B000
+#define LED_SIZE		0x00001000
+#define LED_BASE		0xe3000000
+#define LED_ADDRESS		(LED_BASE + 0xa00)
+
+/* Let's define SCREEN_START for CL7500, even though it's a lie. */
+#define SCREEN_START		0x02000000	/* VRAM */
+#define SCREEN_END		0xdfc00000
+#define SCREEN_BASE		0xdf800000
+
+#define VIDC_BASE		(void __iomem *)0xe0400000
+#define IOMD_BASE		IOMEM(0xe0200000)
+#define IOC_BASE		IOMEM(0xe0200000)
+#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
+#define PCIO_BASE		IOMEM(0xe0010000)
+
+#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
+
+/* in/out bias for the ISA slot region */
+#define ISASLOT_IO		0x80400000
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/io.h b/arch/arm/mach-clps7500/include/mach/io.h
new file mode 100644
index 000000000000..2ff2860889ed
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/io.h
@@ -0,0 +1,255 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/io.h
+ *  from arch/arm/mach-rpc/include/mach/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ *
+ * Modifications:
+ *  06-Dec-1997	RMK	Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * GCC is totally crap at loading/storing data.  We try to persuade it
+ * to do the right thing by using these whereever possible instead of
+ * the above.
+ */
+#define __arch_base_getb(b,o)			\
+ ({						\
+	unsigned int v, r = (b);		\
+	__asm__ __volatile__(			\
+		"ldrb	%0, [%1, %2]"		\
+		: "=r" (v)			\
+		: "r" (r), "Ir" (o));		\
+	v;					\
+ })
+
+#define __arch_base_getl(b,o)			\
+ ({						\
+	unsigned int v, r = (b);		\
+	__asm__ __volatile__(			\
+		"ldr	%0, [%1, %2]"		\
+		: "=r" (v)			\
+		: "r" (r), "Ir" (o));		\
+	v;					\
+ })
+
+#define __arch_base_putb(v,b,o)			\
+ ({						\
+	unsigned int r = (b);			\
+	__asm__ __volatile__(			\
+		"strb	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (r), "Ir" (o));	\
+ })
+
+#define __arch_base_putl(v,b,o)			\
+ ({						\
+	unsigned int r = (b);			\
+	__asm__ __volatile__(			\
+		"str	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (r), "Ir" (o));	\
+ })
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
+ * and are translated to the start of IO.  Note that all addresses are
+ * shifted left!
+ */
+#define __PORT_PCIO(x)	(!((x) & 0x80000000))
+
+/*
+ * Dynamic IO functions - let the compiler
+ * optimize the expressions
+ */
+static inline void __outb (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"strb	%1, [%0, %2, lsl #2]	@ outb"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outw (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outw"
+	: "=&r" (temp)
+	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outl (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outl"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
+static inline unsigned sz __in##fnsuffix (unsigned int port)		\
+{										\
+	unsigned long temp, value;						\
+	__asm__ __volatile__(							\
+	"tst	%2, #0x80000000\n\t"						\
+	"mov	%0, %4\n\t"							\
+	"addeq	%0, %0, %3\n\t"							\
+	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
+	: "=&r" (temp), "=r" (value)						\
+	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
+	: "cc");								\
+	return (unsigned sz)value;						\
+}
+
+static inline unsigned int __ioaddr (unsigned int port)			\
+{										\
+	if (__PORT_PCIO(port))							\
+		return (unsigned int)(PCIO_BASE + (port << 2));			\
+	else									\
+		return (unsigned int)(IO_BASE + (port << 2));			\
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)	\
+	DECLARE_DYN_IN(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)							\
+({										\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inbc(port)								\
+({										\
+	unsigned char result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __outwc(value,port)							\
+({										\
+	unsigned long v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inwc(port)								\
+({										\
+	unsigned short result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result & 0xffff;							\
+})
+
+#define __outlc(value,port)							\
+({										\
+	unsigned long v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (v), "r" (IO_BASE), "r" ((port) << 2));			\
+})
+
+#define __inlc(port)								\
+({										\
+	unsigned long result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __ioaddrc(port)								\
+	(__PORT_PCIO((port)) ? PCIO_BASE + ((port) << 2) : IO_BASE + ((port) << 2))
+
+#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
+#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
+#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
+#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port)			__ioaddr((port))
+
+#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
+
+#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x)	(x)
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/irq.h b/arch/arm/mach-clps7500/include/mach/irq.h
new file mode 100644
index 000000000000..e8da3c58df76
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/irq.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/irq.h
+ *
+ * Copyright (C) 1996 Russell King
+ * Copyright (C) 1999, 2001 Nexus Electronics Ltd.
+ *
+ * Changelog:
+ *   10-10-1996	RMK	Brought up to date with arch-sa110eval
+ *   22-08-1998	RMK	Restructured IRQ routines
+ *   11-08-1999	PJB	Created ARM7500 version, derived from RiscPC code
+ */
+
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline int fixup_irq(unsigned int irq)
+{
+	if (irq == IRQ_ISA) {
+		int isabits = *((volatile unsigned int *)0xe002b700);
+		if (isabits == 0) {
+			printk("Spurious ISA IRQ!\n");
+			return irq;
+		}
+		irq = IRQ_ISA_BASE;
+		while (!(isabits & 1)) {
+			irq++;
+			isabits >>= 1;
+		}
+	}
+
+	return irq;
+}
diff --git a/arch/arm/mach-clps7500/include/mach/irqs.h b/arch/arm/mach-clps7500/include/mach/irqs.h
new file mode 100644
index 000000000000..bee66b487f59
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/irqs.h
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/irqs.h
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd
+ */
+
+#define IRQ_INT2		0
+#define IRQ_INT1		2
+#define IRQ_VSYNCPULSE		3
+#define IRQ_POWERON		4
+#define IRQ_TIMER0		5
+#define IRQ_TIMER1		6
+#define IRQ_FORCE		7
+#define IRQ_INT8		8
+#define IRQ_ISA			9
+#define IRQ_INT6		10
+#define IRQ_INT5		11
+#define IRQ_INT4		12
+#define IRQ_INT3		13
+#define IRQ_KEYBOARDTX		14
+#define IRQ_KEYBOARDRX		15
+
+#define IRQ_DMA0		16
+#define IRQ_DMA1		17
+#define IRQ_DMA2		18
+#define IRQ_DMA3		19
+#define IRQ_DMAS0		20
+#define IRQ_DMAS1		21
+
+#define IRQ_IOP0		24
+#define IRQ_IOP1		25
+#define IRQ_IOP2		26
+#define IRQ_IOP3		27
+#define IRQ_IOP4		28
+#define IRQ_IOP5		29
+#define IRQ_IOP6		30
+#define IRQ_IOP7		31
+
+#define IRQ_MOUSERX		40
+#define IRQ_MOUSETX		41
+#define IRQ_ADC			42
+#define IRQ_EVENT1		43
+#define IRQ_EVENT2		44
+
+#define IRQ_ISA_BASE		48
+#define IRQ_ISA_3		48
+#define IRQ_ISA_4		49
+#define IRQ_ISA_5		50
+#define IRQ_ISA_7		51
+#define IRQ_ISA_9		52
+#define IRQ_ISA_10		53
+#define IRQ_ISA_11		54
+#define IRQ_ISA_14		55	
+
+#define FIQ_INT9		0
+#define FIQ_INT5		1
+#define FIQ_INT6		4
+#define FIQ_INT8		6
+#define FIQ_FORCE		7
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START		64
+
+#define IRQ_TIMER		IRQ_TIMER0
diff --git a/arch/arm/mach-clps7500/include/mach/memory.h b/arch/arm/mach-clps7500/include/mach/memory.h
new file mode 100644
index 000000000000..3326aa99d3ec
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/memory.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/memory.h
+ *
+ * Copyright (c) 1996,1997,1998 Russell King.
+ *
+ * Changelog:
+ *  20-Oct-1996	RMK	Created
+ *  31-Dec-1997	RMK	Fixed definitions to reduce warnings
+ *  11-Jan-1998	RMK	Uninlined to reduce hits on cache
+ *  08-Feb-1998	RMK	Added __virt_to_bus and __bus_to_virt
+ *  21-Mar-1999	RMK	Renamed to memory.h
+ *		RMK	Added TASK_SIZE and PAGE_OFFSET
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x10000000)
+
+/*
+ * These are exactly the same on the RiscPC as the
+ * physical memory view.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Cache flushing area - ROM
+ */
+#define FLUSH_BASE_PHYS		0x00000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/system.h b/arch/arm/mach-clps7500/include/mach/system.h
new file mode 100644
index 000000000000..624fc2830ae0
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/system.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/system.h
+ *
+ * Copyright (c) 1999 Nexus Electronics Ltd.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline void arch_idle(void)
+{
+	iomd_writeb(0, IOMD_SUSMODE);
+}
+
+#define arch_reset(mode)			\
+	do {					\
+		iomd_writeb(0, IOMD_ROMCR0);	\
+		cpu_reset(0);			\
+	} while (0)
+
+#endif
diff --git a/arch/arm/mach-clps7500/include/mach/timex.h b/arch/arm/mach-clps7500/include/mach/timex.h
new file mode 100644
index 000000000000..dfaa9b425757
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/timex.h
+ *
+ * CL7500 architecture timex specifications
+ *
+ * Copyright (C) 1999 Nexus Electronics Ltd
+ */
+
+/*
+ * On the ARM7500, the clock ticks at 2MHz.
+ */
+#define CLOCK_TICK_RATE		2000000
+
diff --git a/arch/arm/mach-clps7500/include/mach/uncompress.h b/arch/arm/mach-clps7500/include/mach/uncompress.h
new file mode 100644
index 000000000000..d7d0af4b49fc
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/uncompress.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/uncompress.h
+ *
+ * Copyright (C) 1999, 2000 Nexus Electronics Ltd.
+ */
+#define BASE 0x03010000
+#define SERBASE (BASE + (0x2f8 << 2))
+
+static inline void putc(char c)
+{
+	while (!(*((volatile unsigned int *)(SERBASE + 0x14)) & 0x20))
+		barrier();
+
+	*((volatile unsigned int *)(SERBASE)) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void arch_decomp_setup(void)
+{
+	int baud = 3686400 / (9600 * 32);
+
+	*((volatile unsigned int *)(SERBASE + 0xC)) = 0x80;
+	*((volatile unsigned int *)(SERBASE + 0x0)) = baud & 0xff;
+	*((volatile unsigned int *)(SERBASE + 0x4)) = (baud & 0xff00) >> 8;
+	*((volatile unsigned int *)(SERBASE + 0xC)) = 3; /* 8 bits */
+	*((volatile unsigned int *)(SERBASE + 0x10)) = 3; /* DTR, RTS */
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-clps7500/include/mach/vmalloc.h b/arch/arm/mach-clps7500/include/mach/vmalloc.h
new file mode 100644
index 000000000000..8fc5406d1b6d
--- /dev/null
+++ b/arch/arm/mach-clps7500/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-clps7500/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c
index 9e4024c4965f..134355787814 100644
--- a/arch/arm/mach-davinci/board-evm.c
+++ b/arch/arm/mach-davinci/board-evm.c
@@ -20,13 +20,13 @@
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/common.h>
+#include <mach/common.h>
 
 /* other misc. init functions */
 void __init davinci_psc_init(void);
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index c6b94f60e0b2..d46c69b55aaa 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -17,10 +17,10 @@
 #include <linux/mutex.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/psc.h>
+#include <mach/psc.h>
 #include "clock.h"
 
 /* PLL/Reset register offsets */
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index 9c67886e7189..c9cb4f09b18f 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -20,9 +20,9 @@
 #include <linux/irq.h>
 #include <linux/bitops.h>
 
-#include <asm/arch/irqs.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/gpio.h>
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
 
 #include <asm/mach/irq.h>
 
diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h
new file mode 100644
index 000000000000..38bdd49bc181
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/clock.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-davinci/include/mach/clock.h
+ *
+ * Clock control driver for DaVinci - header file
+ *
+ * Authors: Vladimir Barinov <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DAVINCI_CLOCK_H
+#define __ASM_ARCH_DAVINCI_CLOCK_H
+
+struct clk;
+
+extern int clk_register(struct clk *clk);
+extern void clk_unregister(struct clk *clk);
+extern int davinci_clk_init(void);
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
new file mode 100644
index 000000000000..a97dfbb15e57
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -0,0 +1,19 @@
+/*
+ * Header for code common to all DaVinci machines.
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ARCH_ARM_MACH_DAVINCI_COMMON_H
+#define __ARCH_ARM_MACH_DAVINCI_COMMON_H
+
+struct sys_timer;
+
+extern struct sys_timer davinci_timer;
+
+#endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
new file mode 100644
index 000000000000..e6c0f0d5d062
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -0,0 +1,21 @@
+/*
+ * Debugging macro for DaVinci
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+		.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x01000000	@ physical base address
+		movne	\rx, #0xfe000000	@ virtual base
+		orr	\rx, \rx, #0x00c20000   @ UART 0
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-davinci/include/mach/dma.h b/arch/arm/mach-davinci/include/mach/dma.h
new file mode 100644
index 000000000000..8e2f2d0ba667
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dma.h
@@ -0,0 +1,16 @@
+/*
+ * DaVinci DMA definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#define MAX_DMA_ADDRESS			0xffffffff
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S
new file mode 100644
index 000000000000..039b84f933b3
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * Low-level IRQ helper macros for TI DaVinci-based platforms
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <mach/io.h>
+#include <mach/irqs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr \tmp, [\base, #0x14]
+		mov \tmp, \tmp, lsr #2
+		sub \irqnr, \tmp, #1
+		cmp \tmp, #0
+		.endm
+
+		.macro	irq_prio_table
+		.endm
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
new file mode 100644
index 000000000000..ec151ccf1e8f
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -0,0 +1,159 @@
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef	__DAVINCI_GPIO_H
+#define	__DAVINCI_GPIO_H
+
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+/*
+ * basic gpio routines
+ *
+ * board-specific init should be done by arch/.../.../board-XXX.c (maybe
+ * initializing banks together) rather than boot loaders; kexec() won't
+ * go through boot loaders.
+ *
+ * the gpio clock will be turned on when gpios are used, and you may also
+ * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
+ * used as gpios, not with other peripherals.
+ *
+ * GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation, and maybe
+ * for later updates, code should write GPIO(N) or:
+ *  - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
+ *  - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
+ *
+ * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
+ * for now, that's != GPIO(N)
+ */
+#define	GPIO(X)		(X)		/* 0 <= X <= 70 */
+#define	GPIOV18(X)	(X)		/* 1.8V i/o; 0 <= X <= 53 */
+#define	GPIOV33(X)	((X)+54)	/* 3.3V i/o; 0 <= X <= 17 */
+
+struct gpio_controller {
+	u32	dir;
+	u32	out_data;
+	u32	set_data;
+	u32	clr_data;
+	u32	in_data;
+	u32	set_rising;
+	u32	clr_rising;
+	u32	set_falling;
+	u32	clr_falling;
+	u32	intstat;
+};
+
+/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
+ * with constant parameters; or in outlined code they execute at runtime.
+ *
+ * You'd access the controller directly when reading or writing more than
+ * one gpio value at a time, and to support wired logic where the value
+ * being driven by the cpu need not match the value read back.
+ *
+ * These are NOT part of the cross-platform GPIO interface
+ */
+static inline struct gpio_controller *__iomem
+__gpio_to_controller(unsigned gpio)
+{
+	void *__iomem ptr;
+
+	if (gpio < 32)
+		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
+	else if (gpio < 64)
+		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
+	else if (gpio < DAVINCI_N_GPIO)
+		ptr = (void *__iomem)IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+	else
+		ptr = NULL;
+	return ptr;
+}
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+	return 1 << (gpio % 32);
+}
+
+/* The get/set/clear functions will inline when called with constant
+ * parameters, for low-overhead bitbanging.  Illegal constant parameters
+ * cause link-time errors.
+ *
+ * Otherwise, calls with variable parameters use outlined functions.
+ */
+extern int __error_inval_gpio(void);
+
+extern void __gpio_set(unsigned gpio, int value);
+extern int __gpio_get(unsigned gpio);
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(value)) {
+		struct gpio_controller	*__iomem g;
+		u32			mask;
+
+		if (gpio >= DAVINCI_N_GPIO)
+			__error_inval_gpio();
+
+		g = __gpio_to_controller(gpio);
+		mask = __gpio_mask(gpio);
+		if (value)
+			__raw_writel(mask, &g->set_data);
+		else
+			__raw_writel(mask, &g->clr_data);
+		return;
+	}
+
+	__gpio_set(gpio, value);
+}
+
+/* Returns zero or nonzero; works for gpios configured as inputs OR
+ * as outputs.
+ *
+ * NOTE: changes in reported values are synchronized to the GPIO clock.
+ * This is most easily seen after calling gpio_set_value() and then immediatly
+ * gpio_get_value(), where the gpio_get_value() would return the old value
+ * until the GPIO clock ticks and the new value gets latched.
+ */
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	struct gpio_controller *__iomem g;
+
+	if (!__builtin_constant_p(gpio))
+		return __gpio_get(gpio);
+
+	if (gpio >= DAVINCI_N_GPIO)
+		return __error_inval_gpio();
+
+	g = __gpio_to_controller(gpio);
+	return !!(__gpio_mask(gpio) & __raw_readl(&g->in_data));
+}
+
+/* powerup default direction is IN */
+extern int gpio_direction_input(unsigned gpio);
+extern int gpio_direction_output(unsigned gpio, int value);
+
+#include <asm-generic/gpio.h>	/* cansleep wrappers */
+
+extern int gpio_request(unsigned gpio, const char *tag);
+extern void gpio_free(unsigned gpio);
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return DAVINCI_N_AINTC_IRQ + gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq - DAVINCI_N_AINTC_IRQ;
+}
+
+#endif				/* __DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
new file mode 100644
index 000000000000..a2e8969afaca
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
@@ -0,0 +1,52 @@
+/*
+ * Common hardware definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * Base register addresses
+ */
+#define DAVINCI_DMA_3PCC_BASE			(0x01C00000)
+#define DAVINCI_DMA_3PTC0_BASE			(0x01C10000)
+#define DAVINCI_DMA_3PTC1_BASE			(0x01C10400)
+#define DAVINCI_I2C_BASE			(0x01C21000)
+#define DAVINCI_PWM0_BASE			(0x01C22000)
+#define DAVINCI_PWM1_BASE			(0x01C22400)
+#define DAVINCI_PWM2_BASE			(0x01C22800)
+#define DAVINCI_SYSTEM_MODULE_BASE		(0x01C40000)
+#define DAVINCI_PLL_CNTRL0_BASE			(0x01C40800)
+#define DAVINCI_PLL_CNTRL1_BASE			(0x01C40C00)
+#define DAVINCI_PWR_SLEEP_CNTRL_BASE		(0x01C41000)
+#define DAVINCI_SYSTEM_DFT_BASE			(0x01C42000)
+#define DAVINCI_IEEE1394_BASE			(0x01C60000)
+#define DAVINCI_USB_OTG_BASE			(0x01C64000)
+#define DAVINCI_CFC_ATA_BASE			(0x01C66000)
+#define DAVINCI_SPI_BASE			(0x01C66800)
+#define DAVINCI_GPIO_BASE			(0x01C67000)
+#define DAVINCI_UHPI_BASE			(0x01C67800)
+#define DAVINCI_VPSS_REGS_BASE			(0x01C70000)
+#define DAVINCI_EMAC_CNTRL_REGS_BASE		(0x01C80000)
+#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE	(0x01C81000)
+#define DAVINCI_EMAC_WRAPPER_RAM_BASE		(0x01C82000)
+#define DAVINCI_MDIO_CNTRL_REGS_BASE		(0x01C84000)
+#define DAVINCI_IMCOP_BASE			(0x01CC0000)
+#define DAVINCI_ASYNC_EMIF_CNTRL_BASE		(0x01E00000)
+#define DAVINCI_VLYNQ_BASE			(0x01E01000)
+#define DAVINCI_MCBSP_BASE			(0x01E02000)
+#define DAVINCI_MMC_SD_BASE			(0x01E10000)
+#define DAVINCI_MS_BASE				(0x01E20000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	(0x02000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE	(0x04000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE	(0x06000000)
+#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE	(0x08000000)
+#define DAVINCI_VLYNQ_REMOTE_BASE		(0x0C000000)
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-davinci/include/mach/i2c.h b/arch/arm/mach-davinci/include/mach/i2c.h
new file mode 100644
index 000000000000..e2f54168abd1
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/i2c.h
@@ -0,0 +1,21 @@
+/*
+ * DaVinci I2C controller platfrom_device info
+ *
+ * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+*/
+
+#ifndef __ASM_ARCH_I2C_H
+#define __ASM_ARCH_I2C_H
+
+/* All frequencies are expressed in kHz */
+struct davinci_i2c_platform_data {
+	unsigned int	bus_freq;	/* standard bus frequency */
+	unsigned int	bus_delay;	/* transaction delay */
+};
+
+#endif /* __ASM_ARCH_I2C_H */
diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h
new file mode 100644
index 000000000000..e7accb910864
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/io.h
@@ -0,0 +1,79 @@
+/*
+ * DaVinci IO address definitions
+ *
+ * Copied from include/asm/arm/arch-omap/io.h
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * ----------------------------------------------------------------------------
+ * I/O mapping
+ * ----------------------------------------------------------------------------
+ */
+#define IO_PHYS		0x01c00000
+#define IO_OFFSET	0xfd000000 /* Virtual IO = 0xfec00000 */
+#define IO_SIZE		0x00400000
+#define IO_VIRT		(IO_PHYS + IO_OFFSET)
+#define io_p2v(pa)	((pa) + IO_OFFSET)
+#define io_v2p(va)	((va) - IO_OFFSET)
+#define IO_ADDRESS(x)	io_p2v(x)
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define PCIO_BASE               0
+#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
+#define __mem_pci(a)		(a)
+#define __mem_isa(a)		(a)
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Functions to access the DaVinci IO region
+ *
+ * NOTE: - Use davinci_read/write[bwl] for physical register addresses
+ *	 - Use __raw_read/write[bwl]() for virtual register addresses
+ *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
+ *	 - DO NOT use hardcoded virtual addresses to allow changing the
+ *	   IO address space again if needed
+ */
+#define davinci_readb(a)	(*(volatile unsigned char  *)IO_ADDRESS(a))
+#define davinci_readw(a)	(*(volatile unsigned short *)IO_ADDRESS(a))
+#define davinci_readl(a)	(*(volatile unsigned int   *)IO_ADDRESS(a))
+
+#define davinci_writeb(v,a)	(*(volatile unsigned char  *)IO_ADDRESS(a) = (v))
+#define davinci_writew(v,a)	(*(volatile unsigned short *)IO_ADDRESS(a) = (v))
+#define davinci_writel(v,a)	(*(volatile unsigned int   *)IO_ADDRESS(a) = (v))
+
+/* 16 bit uses LDRH/STRH, base +/- offset_8 */
+typedef struct { volatile u16 offset[256]; } __regbase16;
+#define __REGV16(vaddr)		((__regbase16 *)((vaddr)&~0xff)) \
+					->offset[((vaddr)&0xff)>>1]
+#define __REG16(paddr)          __REGV16(io_p2v(paddr))
+
+/* 8/32 bit uses LDR/STR, base +/- offset_12 */
+typedef struct { volatile u8 offset[4096]; } __regbase8;
+#define __REGV8(vaddr)		((__regbase8  *)((vaddr)&~4095)) \
+					->offset[((vaddr)&4095)>>0]
+#define __REG8(paddr)		__REGV8(io_p2v(paddr))
+
+typedef struct { volatile u32 offset[4096]; } __regbase32;
+#define __REGV32(vaddr)		((__regbase32 *)((vaddr)&~4095)) \
+					->offset[((vaddr)&4095)>>2]
+
+#define __REG(paddr)		__REGV32(io_p2v(paddr))
+#else
+
+#define __REG(x)	(*((volatile unsigned long *)io_p2v(x)))
+
+#endif /* __ASSEMBLER__ */
+#endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
new file mode 100644
index 000000000000..f4c5ca6da9f4
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -0,0 +1,105 @@
+/*
+ * DaVinci interrupt controller definitions
+ *
+ *  Copyright (C) 2006 Texas Instruments.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/* Base address */
+#define DAVINCI_ARM_INTC_BASE 0x01C48000
+
+/* Interrupt lines */
+#define IRQ_VDINT0       0
+#define IRQ_VDINT1       1
+#define IRQ_VDINT2       2
+#define IRQ_HISTINT      3
+#define IRQ_H3AINT       4
+#define IRQ_PRVUINT      5
+#define IRQ_RSZINT       6
+#define IRQ_VFOCINT      7
+#define IRQ_VENCINT      8
+#define IRQ_ASQINT       9
+#define IRQ_IMXINT       10
+#define IRQ_VLCDINT      11
+#define IRQ_USBINT       12
+#define IRQ_EMACINT      13
+
+#define IRQ_CCINT0       16
+#define IRQ_CCERRINT     17
+#define IRQ_TCERRINT0    18
+#define IRQ_TCERRINT     19
+#define IRQ_PSCIN        20
+
+#define IRQ_IDE          22
+#define IRQ_HPIINT       23
+#define IRQ_MBXINT       24
+#define IRQ_MBRINT       25
+#define IRQ_MMCINT       26
+#define IRQ_SDIOINT      27
+#define IRQ_MSINT        28
+#define IRQ_DDRINT       29
+#define IRQ_AEMIFINT     30
+#define IRQ_VLQINT       31
+#define IRQ_TINT0_TINT12 32
+#define IRQ_TINT0_TINT34 33
+#define IRQ_TINT1_TINT12 34
+#define IRQ_TINT1_TINT34 35
+#define IRQ_PWMINT0      36
+#define IRQ_PWMINT1      37
+#define IRQ_PWMINT2      38
+#define IRQ_I2C          39
+#define IRQ_UARTINT0     40
+#define IRQ_UARTINT1     41
+#define IRQ_UARTINT2     42
+#define IRQ_SPINT0       43
+#define IRQ_SPINT1       44
+
+#define IRQ_DSP2ARM0     46
+#define IRQ_DSP2ARM1     47
+#define IRQ_GPIO0        48
+#define IRQ_GPIO1        49
+#define IRQ_GPIO2        50
+#define IRQ_GPIO3        51
+#define IRQ_GPIO4        52
+#define IRQ_GPIO5        53
+#define IRQ_GPIO6        54
+#define IRQ_GPIO7        55
+#define IRQ_GPIOBNK0     56
+#define IRQ_GPIOBNK1     57
+#define IRQ_GPIOBNK2     58
+#define IRQ_GPIOBNK3     59
+#define IRQ_GPIOBNK4     60
+#define IRQ_COMMTX       61
+#define IRQ_COMMRX       62
+#define IRQ_EMUINT       63
+
+#define DAVINCI_N_AINTC_IRQ	64
+#define DAVINCI_N_GPIO		71
+
+#define NR_IRQS			(DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
+
+#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
new file mode 100644
index 000000000000..dd1625c23cf4
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/memory.h
@@ -0,0 +1,64 @@
+/*
+ * DaVinci memory space definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+#include <asm/page.h>
+#include <asm/sizes.h>
+
+/**************************************************************************
+ * Definitions
+ **************************************************************************/
+#define DAVINCI_DDR_BASE    0x80000000
+#define DAVINCI_IRAM_BASE   0x00008000 /* ARM Internal RAM */
+
+#define PHYS_OFFSET DAVINCI_DDR_BASE
+
+/*
+ * Increase size of DMA-consistent memory region
+ */
+#define CONSISTENT_DMA_SIZE (14<<20)
+
+#ifndef __ASSEMBLY__
+/*
+ * Restrict DMA-able region to workaround silicon bug.  The bug
+ * restricts buffers available for DMA to video hardware to be
+ * below 128M
+ */
+static inline void
+__arch_adjust_zones(int node, unsigned long *size, unsigned long *holes)
+{
+	unsigned int sz = (128<<20) >> PAGE_SHIFT;
+
+	if (node != 0)
+		sz = 0;
+
+	size[1] = size[0] - sz;
+	size[0] = sz;
+}
+
+#define arch_adjust_zones(node, zone_size, holes) \
+        if ((meminfo.bank[0].size >> 20) > 128) __arch_adjust_zones(node, zone_size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + (128<<20) - 1)
+
+#endif
+
+/*
+ * Bus address is physical address
+ */
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
new file mode 100644
index 000000000000..c24b6782804d
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -0,0 +1,55 @@
+/*
+ * DaVinci pin multiplexing defines
+ *
+ * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#define DAVINCI_MUX_AEAW0	0
+#define DAVINCI_MUX_AEAW1	1
+#define DAVINCI_MUX_AEAW2	2
+#define DAVINCI_MUX_AEAW3	3
+#define DAVINCI_MUX_AEAW4	4
+#define DAVINCI_MUX_AECS4	10
+#define DAVINCI_MUX_AECS5	11
+#define DAVINCI_MUX_VLYNQWD0	12
+#define DAVINCI_MUX_VLYNQWD1	13
+#define DAVINCI_MUX_VLSCREN	14
+#define DAVINCI_MUX_VLYNQEN	15
+#define DAVINCI_MUX_HDIREN	16
+#define DAVINCI_MUX_ATAEN	17
+#define DAVINCI_MUX_RGB666	22
+#define DAVINCI_MUX_RGB888	23
+#define DAVINCI_MUX_LOEEN	24
+#define DAVINCI_MUX_LFLDEN	25
+#define DAVINCI_MUX_CWEN	26
+#define DAVINCI_MUX_CFLDEN	27
+#define DAVINCI_MUX_HPIEN	29
+#define DAVINCI_MUX_1394EN	30
+#define DAVINCI_MUX_EMACEN	31
+
+#define DAVINCI_MUX_LEVEL2	32
+#define DAVINCI_MUX_UART0	(DAVINCI_MUX_LEVEL2 + 0)
+#define DAVINCI_MUX_UART1	(DAVINCI_MUX_LEVEL2 + 1)
+#define DAVINCI_MUX_UART2	(DAVINCI_MUX_LEVEL2 + 2)
+#define DAVINCI_MUX_U2FLO	(DAVINCI_MUX_LEVEL2 + 3)
+#define DAVINCI_MUX_PWM0	(DAVINCI_MUX_LEVEL2 + 4)
+#define DAVINCI_MUX_PWM1	(DAVINCI_MUX_LEVEL2 + 5)
+#define DAVINCI_MUX_PWM2	(DAVINCI_MUX_LEVEL2 + 6)
+#define DAVINCI_MUX_I2C		(DAVINCI_MUX_LEVEL2 + 7)
+#define DAVINCI_MUX_SPI		(DAVINCI_MUX_LEVEL2 + 8)
+#define DAVINCI_MUX_MSTK	(DAVINCI_MUX_LEVEL2 + 9)
+#define DAVINCI_MUX_ASP		(DAVINCI_MUX_LEVEL2 + 10)
+#define DAVINCI_MUX_CLK0	(DAVINCI_MUX_LEVEL2 + 16)
+#define DAVINCI_MUX_CLK1	(DAVINCI_MUX_LEVEL2 + 17)
+#define DAVINCI_MUX_TIMIN	(DAVINCI_MUX_LEVEL2 + 18)
+
+extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable);
+
+#endif /* __ASM_ARCH_MUX_H */
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
new file mode 100644
index 000000000000..4977aa071e1e
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -0,0 +1,76 @@
+/*
+ *  DaVinci Power & Sleep Controller (PSC) defines
+ *
+ *  Copyright (C) 2006 Texas Instruments.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#ifndef __ASM_ARCH_PSC_H
+#define __ASM_ARCH_PSC_H
+
+/* Power and Sleep Controller (PSC) Domains */
+#define DAVINCI_GPSC_ARMDOMAIN      0
+#define DAVINCI_GPSC_DSPDOMAIN      1
+
+#define DAVINCI_LPSC_VPSSMSTR       0
+#define DAVINCI_LPSC_VPSSSLV        1
+#define DAVINCI_LPSC_TPCC           2
+#define DAVINCI_LPSC_TPTC0          3
+#define DAVINCI_LPSC_TPTC1          4
+#define DAVINCI_LPSC_EMAC           5
+#define DAVINCI_LPSC_EMAC_WRAPPER   6
+#define DAVINCI_LPSC_MDIO           7
+#define DAVINCI_LPSC_IEEE1394       8
+#define DAVINCI_LPSC_USB            9
+#define DAVINCI_LPSC_ATA            10
+#define DAVINCI_LPSC_VLYNQ          11
+#define DAVINCI_LPSC_UHPI           12
+#define DAVINCI_LPSC_DDR_EMIF       13
+#define DAVINCI_LPSC_AEMIF          14
+#define DAVINCI_LPSC_MMC_SD         15
+#define DAVINCI_LPSC_MEMSTICK       16
+#define DAVINCI_LPSC_McBSP          17
+#define DAVINCI_LPSC_I2C            18
+#define DAVINCI_LPSC_UART0          19
+#define DAVINCI_LPSC_UART1          20
+#define DAVINCI_LPSC_UART2          21
+#define DAVINCI_LPSC_SPI            22
+#define DAVINCI_LPSC_PWM0           23
+#define DAVINCI_LPSC_PWM1           24
+#define DAVINCI_LPSC_PWM2           25
+#define DAVINCI_LPSC_GPIO           26
+#define DAVINCI_LPSC_TIMER0         27
+#define DAVINCI_LPSC_TIMER1         28
+#define DAVINCI_LPSC_TIMER2         29
+#define DAVINCI_LPSC_SYSTEM_SUBSYS  30
+#define DAVINCI_LPSC_ARM            31
+#define DAVINCI_LPSC_SCR2           32
+#define DAVINCI_LPSC_SCR3           33
+#define DAVINCI_LPSC_SCR4           34
+#define DAVINCI_LPSC_CROSSBAR       35
+#define DAVINCI_LPSC_CFG27          36
+#define DAVINCI_LPSC_CFG3           37
+#define DAVINCI_LPSC_CFG5           38
+#define DAVINCI_LPSC_GEM            39
+#define DAVINCI_LPSC_IMCOP          40
+
+#endif /* __ASM_ARCH_PSC_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
new file mode 100644
index 000000000000..fb8cb229bfd2
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -0,0 +1,20 @@
+/*
+ * DaVinci serial device definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <mach/io.h>
+
+#define DAVINCI_UART0_BASE   (IO_PHYS + 0x20000)
+#define DAVINCI_UART1_BASE   (IO_PHYS + 0x20400)
+#define DAVINCI_UART2_BASE   (IO_PHYS + 0x20800)
+
+#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
new file mode 100644
index 000000000000..84ff77aeb738
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -0,0 +1,29 @@
+/*
+ * DaVinci system defines
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <mach/hardware.h>
+
+extern void davinci_watchdog_reset(void);
+
+static void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static void arch_reset(char mode)
+{
+	davinci_watchdog_reset();
+}
+
+#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-davinci/include/mach/timex.h b/arch/arm/mach-davinci/include/mach/timex.h
new file mode 100644
index 000000000000..52827567841d
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/timex.h
@@ -0,0 +1,17 @@
+/*
+ * DaVinci timer defines
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* The source frequency for the timers is the 27MHz clock */
+#define CLOCK_TICK_RATE 27000000
+
+#endif /* __ASM_ARCH_TIMEX_H__ */
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
new file mode 100644
index 000000000000..8c165def37b6
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -0,0 +1,35 @@
+/*
+ * Serial port stubs for kernel decompress status messages
+ *
+ *  Author:     Anant Gole
+ * (C) Copyright (C) 2006, Texas Instruments, Inc
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <mach/serial.h>
+
+/* PORT_16C550A, in polled non-fifo mode */
+
+static void putc(char c)
+{
+	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+
+	while (!(uart[UART_LSR] & UART_LSR_THRE))
+		barrier();
+	uart[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+	volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+	while (!(uart[UART_LSR] & UART_LSR_THRE))
+		barrier();
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-davinci/include/mach/vmalloc.h b/arch/arm/mach-davinci/include/mach/vmalloc.h
new file mode 100644
index 000000000000..b98bd9e92fd6
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/vmalloc.h
@@ -0,0 +1,15 @@
+/*
+ * DaVinci vmalloc definitions
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <asm/memory.h>
+#include <mach/io.h>
+
+/* Allow vmalloc range until the IO virtual range minus a 2M "hole" */
+#define VMALLOC_END	  (IO_VIRT - (2<<20))
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index 47787ff84a6a..5bb66b61c1a3 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -17,7 +17,7 @@
 #include <asm/memory.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 extern void davinci_check_revision(void);
 
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 1333d84d2e45..12ca9f29f847 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -23,7 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/irq.h>
 
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index 92d26bd305b7..8ff9d8aca60b 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -11,9 +11,9 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 /* System control register offsets */
 #define PINMUX0         0x00
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 1334416559ad..720c48b9ee04 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -23,9 +23,9 @@
 #include <linux/init.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/psc.h>
-#include <asm/arch/mux.h>
+#include <mach/hardware.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
 
 /* PSC register offsets */
 #define EPCPR		0x070
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 8368c93c788d..caf101e2cc62 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -29,9 +29,9 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/serial.h>
-#include <asm/arch/irqs.h>
+#include <mach/hardware.h>
+#include <mach/serial.h>
+#include <mach/irqs.h>
 
 #define UART_DAVINCI_PWREMU 0x0c
 
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index e96a3dcdc1a7..206e80d41717 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -17,13 +17,13 @@
 #include <linux/spinlock.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/errno.h>
-#include <asm/arch/io.h>
+#include <mach/io.h>
 
 static struct clock_event_device clockevent_davinci;
 
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 7710e14b5268..65cc7c271917 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -15,7 +15,7 @@
 #include <linux/serial_8250.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
new file mode 100644
index 000000000000..1dde8227f3a2
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -0,0 +1,21 @@
+/* arch/arm/mach-ebsa110/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+**/
+
+		.macro	addruart,rx
+		mov	\rx, #0xf0000000
+		orr	\rx, \rx, #0x00000be0
+		.endm
+
+#define UART_SHIFT	2
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ebsa110/include/mach/dma.h b/arch/arm/mach-ebsa110/include/mach/dma.h
new file mode 100644
index 000000000000..780a04c8bbe9
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/dma.h
@@ -0,0 +1,11 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  EBSA110 DMA definitions
+ */
diff --git a/arch/arm/mach-ebsa110/include/mach/entry-macro.S b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
new file mode 100644
index 000000000000..cc3e5992f6b3
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-ebsa110/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for ebsa110 platform.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+
+
+#define IRQ_STAT		0xff000000	/* read */
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	mov	\base, #IRQ_STAT
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, stat, base, tmp
+	ldrb	\stat, [\base]			@ get interrupts
+	mov	\irqnr, #0
+	tst	\stat, #15
+	addeq	\irqnr, \irqnr, #4
+	moveq	\stat, \stat, lsr #4
+	tst	\stat, #3
+	addeq	\irqnr, \irqnr, #2
+	moveq	\stat, \stat, lsr #2
+	tst	\stat, #1
+	addeq	\irqnr, \irqnr, #1
+	moveq	\stat, \stat, lsr #1
+	tst	\stat, #1			@ bit 0 should be set
+	.endm
+
diff --git a/arch/arm/mach-ebsa110/include/mach/hardware.h b/arch/arm/mach-ebsa110/include/mach/hardware.h
new file mode 100644
index 000000000000..4b2fb7743909
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/hardware.h
@@ -0,0 +1,63 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/hardware.h
+ *
+ *  Copyright (C) 1996-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains the hardware definitions of the EBSA-110.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * The EBSA110 has a weird "ISA IO" region:
+ *
+ * Region 0 (addr = 0xf0000000 + io << 2)
+ * --------------------------------------------------------
+ * Physical region	IO region
+ * f0000fe0 - f0000ffc	3f8 - 3ff  ttyS0
+ * f0000e60 - f0000e64	398 - 399
+ * f0000de0 - f0000dfc	378 - 37f  lp0
+ * f0000be0 - f0000bfc	2f8 - 2ff  ttyS1
+ *
+ * Region 1 (addr = 0xf0000000 + (io & ~1) << 1 + (io & 1))
+ * --------------------------------------------------------
+ * Physical region	IO region
+ * f00014f1             a79        pnp write data
+ * f00007c0 - f00007c1	3e0 - 3e1  pcmcia
+ * f00004f1		279        pnp address
+ * f0000440 - f000046c  220 - 236  eth0
+ * f0000405		203        pnp read data
+ */
+
+#define ISAMEM_PHYS		0xe0000000
+#define ISAMEM_SIZE		0x10000000
+
+#define ISAIO_PHYS		0xf0000000
+#define ISAIO_SIZE		PGDIR_SIZE
+
+#define TRICK0_PHYS		0xf2000000
+#define TRICK1_PHYS		0xf2400000
+#define TRICK2_PHYS		0xf2800000
+#define TRICK3_PHYS		0xf2c00000
+#define TRICK4_PHYS		0xf3000000
+#define TRICK5_PHYS		0xf3400000
+#define TRICK6_PHYS		0xf3800000
+#define TRICK7_PHYS		0xf3c00000
+
+#define ISAMEM_BASE		0xe0000000
+#define ISAIO_BASE		0xf0000000
+
+#define PIT_BASE		0xfc000000
+#define SOFT_BASE		0xfd000000
+
+/*
+ * RAM definitions
+ */
+#define UNCACHEABLE_ADDR	0xff000000	/* IRQ_STAT */
+
+#endif
+
diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h
new file mode 100644
index 000000000000..f68daa632af0
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/io.h
@@ -0,0 +1,92 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/io.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  06-Dec-1997	RMK	Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+u8 __inb8(unsigned int port);
+void __outb8(u8  val, unsigned int port);
+
+u8 __inb16(unsigned int port);
+void __outb16(u8  val, unsigned int port);
+
+u16 __inw(unsigned int port);
+void __outw(u16 val, unsigned int port);
+
+u32 __inl(unsigned int port);
+void __outl(u32 val, unsigned int port);
+
+u8  __readb(const volatile void __iomem *addr);
+u16 __readw(const volatile void __iomem *addr);
+u32 __readl(const volatile void __iomem *addr);
+
+void __writeb(u8  val, void __iomem *addr);
+void __writew(u16 val, void __iomem *addr);
+void __writel(u32 val, void __iomem *addr);
+
+/*
+ * Argh, someone forgot the IOCS16 line.  We therefore have to handle
+ * the byte stearing by selecting the correct byte IO functions here.
+ */
+#ifdef ISA_SIXTEEN_BIT_PERIPHERAL
+#define inb(p) 			__inb16(p)
+#define outb(v,p)		__outb16(v,p)
+#else
+#define inb(p)			__inb8(p)
+#define outb(v,p)		__outb8(v,p)
+#endif
+
+#define inw(p)			__inw(p)
+#define outw(v,p)		__outw(v,p)
+
+#define inl(p)			__inl(p)
+#define outl(v,p)		__outl(v,p)
+
+#define readb(b)		__readb(b)
+#define readw(b)		__readw(b)
+#define readl(b)		__readl(b)
+#define readb_relaxed(addr)	readb(addr)
+#define readw_relaxed(addr)	readw(addr)
+#define readl_relaxed(addr)	readl(addr)
+
+#define writeb(v,b)		__writeb(v,b)
+#define writew(v,b)		__writew(v,b)
+#define writel(v,b)		__writel(v,b)
+
+static inline void __iomem *__arch_ioremap(unsigned long cookie, size_t size,
+					   unsigned int flags)
+{
+	return (void __iomem *)cookie;
+}
+
+#define __arch_ioremap		__arch_ioremap
+#define __arch_iounmap(cookie)	do { } while (0)
+
+extern void insb(unsigned int port, void *buf, int sz);
+extern void insw(unsigned int port, void *buf, int sz);
+extern void insl(unsigned int port, void *buf, int sz);
+
+extern void outsb(unsigned int port, const void *buf, int sz);
+extern void outsw(unsigned int port, const void *buf, int sz);
+extern void outsl(unsigned int port, const void *buf, int sz);
+
+/* can't support writesb atm */
+extern void writesw(void __iomem *addr, const void *data, int wordlen);
+extern void writesl(void __iomem *addr, const void *data, int longlen);
+
+/* can't support readsb atm */
+extern void readsw(const void __iomem *addr, void *data, int wordlen);
+extern void readsl(const void __iomem *addr, void *data, int longlen);
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/irqs.h b/arch/arm/mach-ebsa110/include/mach/irqs.h
new file mode 100644
index 000000000000..a8f3771bc060
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/irqs.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/irqs.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define NR_IRQS			8
+
+#define IRQ_EBSA110_PRINTER	0
+#define IRQ_EBSA110_COM1	1
+#define IRQ_EBSA110_COM2	2
+#define IRQ_EBSA110_ETHERNET	3
+#define IRQ_EBSA110_TIMER0	4
+#define IRQ_EBSA110_TIMER1	5
+#define IRQ_EBSA110_PCMCIA	6
+#define IRQ_EBSA110_IMMEDIATE	7
diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h
new file mode 100644
index 000000000000..eea4b75b657b
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/memory.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/memory.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   20-Oct-1996 RMK	Created
+ *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
+ *   21-Mar-1999 RMK	Renamed to memory.h
+ *		 RMK	Moved TASK_SIZE and PAGE_OFFSET here
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+/*
+ * We keep this 1:1 so that we don't interfere
+ * with the PCMCIA memory regions
+ */
+#define __virt_to_bus(x)	(x)
+#define __bus_to_virt(x)	(x)
+
+/*
+ * Cache flushing area - SRAM
+ */
+#define FLUSH_BASE_PHYS		0x40000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
new file mode 100644
index 000000000000..350a028997ef
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/system.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/system.h
+ *
+ *  Copyright (C) 1996-2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+/*
+ * EBSA110 idling methodology:
+ *
+ * We can not execute the "wait for interrupt" instruction since that
+ * will stop our MCLK signal (which provides the clock for the glue
+ * logic, and therefore the timer interrupt).
+ *
+ * Instead, we spin, polling the IRQ_STAT register for the occurrence
+ * of any interrupt with core clock down to the memory clock.
+ */
+static inline void arch_idle(void)
+{
+	const char *irq_stat = (char *)0xff000000;
+
+	/* disable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
+
+	/* wait for an interrupt to occur */
+	while (!*irq_stat);
+
+	/* enable clock switching */
+	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
+}
+
+#define arch_reset(mode)	cpu_reset(0x80000000)
+
+#endif
diff --git a/arch/arm/mach-ebsa110/include/mach/timex.h b/arch/arm/mach-ebsa110/include/mach/timex.h
new file mode 100644
index 000000000000..4fb43b22a102
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/timex.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/timex.h
+ *
+ *  Copyright (C) 1997, 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  EBSA110 architecture timex specifications
+ */
+
+/*
+ * On the EBSA, the clock ticks at weird rates.
+ * This is therefore not used to calculate the
+ * divisor.
+ */
+#define CLOCK_TICK_RATE		47894000
+
diff --git a/arch/arm/mach-ebsa110/include/mach/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h
new file mode 100644
index 000000000000..32041509fbf8
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/uncompress.h
@@ -0,0 +1,45 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+
+#define SERIAL_BASE	((unsigned char *)0xf0000be0)
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	unsigned char v, *base = SERIAL_BASE;
+
+	do {
+		v = base[UART_LSR << 2];
+		barrier();
+	} while (!(v & UART_LSR_THRE));
+
+	base[UART_TX << 2] = c;
+}
+
+static inline void flush(void)
+{
+	unsigned char v, *base = SERIAL_BASE;
+
+	do {
+		v = base[UART_LSR << 2];
+		barrier();
+	} while ((v & (UART_LSR_TEMT|UART_LSR_THRE)) !=
+		 (UART_LSR_TEMT|UART_LSR_THRE));
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ebsa110/include/mach/vmalloc.h b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
new file mode 100644
index 000000000000..9b44c19e95ec
--- /dev/null
+++ b/arch/arm/mach-ebsa110/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ *  arch/arm/mach-ebsa110/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x1f000000)
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index 6b2380e153ef..53748f5462e9 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -24,7 +24,7 @@
 #include <linux/kernel.h>
 #include <linux/types.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/page.h>
 
diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c
index 3bc8c5e708e6..6a6ea57c2a4e 100644
--- a/arch/arm/mach-ebsa110/leds.c
+++ b/arch/arm/mach-ebsa110/leds.c
@@ -15,7 +15,7 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index ac5d5818eb7b..aa1fb352fb8f 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index f62c35500bb7..6062e47f2043 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -16,7 +16,7 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <asm/div64.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 struct clk {
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 1d7bca6aa441..f99f43669392 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -36,7 +36,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
@@ -46,7 +46,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 #include <asm/hardware/vic.h>
 
@@ -226,7 +226,7 @@ static void ep93xx_gpio_irq_ack(unsigned int irq)
 	int port = line >> 3;
 	int port_mask = 1 << (line & 7);
 
-	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
 		ep93xx_gpio_update_int_params(port);
 	}
@@ -240,7 +240,7 @@ static void ep93xx_gpio_irq_mask_ack(unsigned int irq)
 	int port = line >> 3;
 	int port_mask = 1 << (line & 7);
 
-	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE)
+	if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
 		gpio_int_type2[port] ^= port_mask; /* switch edge direction */
 
 	gpio_int_unmasked[port] &= ~port_mask;
@@ -283,27 +283,27 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type)
 	gpio_direction_input(gpio);
 
 	switch (type) {
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		gpio_int_type1[port] |= port_mask;
 		gpio_int_type2[port] |= port_mask;
 		desc->handle_irq = handle_edge_irq;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		gpio_int_type1[port] |= port_mask;
 		gpio_int_type2[port] &= ~port_mask;
 		desc->handle_irq = handle_edge_irq;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		gpio_int_type1[port] &= ~port_mask;
 		gpio_int_type2[port] |= port_mask;
 		desc->handle_irq = handle_level_irq;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		gpio_int_type1[port] &= ~port_mask;
 		gpio_int_type2[port] &= ~port_mask;
 		desc->handle_irq = handle_level_irq;
 		break;
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		gpio_int_type1[port] |= port_mask;
 		/* set initial polarity based on current input level */
 		if (gpio_get_value(gpio))
diff --git a/arch/arm/mach-ep93xx/edb9302.c b/arch/arm/mach-ep93xx/edb9302.c
index 0315615b74da..97550c0ad7b0 100644
--- a/arch/arm/mach-ep93xx/edb9302.c
+++ b/arch/arm/mach-ep93xx/edb9302.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9302a.c b/arch/arm/mach-ep93xx/edb9302a.c
index 62e064bab1d2..99b01d44bf1c 100644
--- a/arch/arm/mach-ep93xx/edb9302a.c
+++ b/arch/arm/mach-ep93xx/edb9302a.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9307.c b/arch/arm/mach-ep93xx/edb9307.c
index d6a5698da91f..9fb72d01a36c 100644
--- a/arch/arm/mach-ep93xx/edb9307.c
+++ b/arch/arm/mach-ep93xx/edb9307.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9312.c b/arch/arm/mach-ep93xx/edb9312.c
index e310e4d72990..87267a574f5e 100644
--- a/arch/arm/mach-ep93xx/edb9312.c
+++ b/arch/arm/mach-ep93xx/edb9312.c
@@ -20,7 +20,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9315.c b/arch/arm/mach-ep93xx/edb9315.c
index 249ca9e57bc6..7e373950be4d 100644
--- a/arch/arm/mach-ep93xx/edb9315.c
+++ b/arch/arm/mach-ep93xx/edb9315.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/edb9315a.c b/arch/arm/mach-ep93xx/edb9315a.c
index 7ca0e6170a41..08a7c9bfb689 100644
--- a/arch/arm/mach-ep93xx/edb9315a.c
+++ b/arch/arm/mach-ep93xx/edb9315a.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 694590a451c1..9b41ec1f089e 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c
index dc2e4c00d989..0f3fb87ca4be 100644
--- a/arch/arm/mach-ep93xx/gpio.c
+++ b/arch/arm/mach-ep93xx/gpio.c
@@ -17,7 +17,7 @@
 #include <linux/module.h>
 #include <linux/seq_file.h>
 
-#include <asm/arch/ep93xx-regs.h>
+#include <mach/ep93xx-regs.h>
 #include <asm/io.h>
 #include <asm/gpio.h>
 
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..802858bc8095
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/debug-macro.S
+ * Debugging macro include header
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <mach/ep93xx-regs.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1				@ MMU enabled?
+		ldreq	\rx, =EP93XX_APB_PHYS_BASE	@ Physical base
+		ldrne	\rx, =EP93XX_APB_VIRT_BASE	@ virtual base
+		orr	\rx, \rx, #0x000c0000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
new file mode 100644
index 000000000000..d0fa9656e92f
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/dma.h
+ */
diff --git a/arch/arm/mach-ep93xx/include/mach/entry-macro.S b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
new file mode 100644
index 000000000000..96b85e2c2c0b
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
@@ -0,0 +1,59 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/entry-macro.S
+ * IRQ demultiplexing for EP93xx
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+#include <mach/ep93xx-regs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =(EP93XX_AHB_VIRT_BASE)
+		orr	\base, \base, #0x000b0000
+		mov	\irqnr, #0
+		ldr	\irqstat, [\base]		@ lower 32 interrupts
+		cmp	\irqstat, #0
+		bne	1001f
+
+		eor	\base, \base, #0x00070000
+		ldr	\irqstat, [\base]		@ upper 32 interrupts
+		cmp	\irqstat, #0
+		beq	1002f
+		mov	\irqnr, #0x20
+
+1001:
+		movs	\tmp, \irqstat, lsl #16
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #16
+
+		movs	\tmp, \irqstat, lsl #8
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #8
+
+		movs	\tmp, \irqstat, lsl #4
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #4
+
+		movs	\tmp, \irqstat, lsl #2
+		movne	\irqstat, \tmp
+		addeq	\irqnr, \irqnr, #2
+
+		movs	\tmp, \irqstat, lsl #1
+		addeq	\irqnr, \irqnr, #1
+		orrs	\base, \base, #1
+
+1002:
+		.endm
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
new file mode 100644
index 000000000000..9f4458c8e070
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -0,0 +1,133 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+ */
+
+#ifndef __ASM_ARCH_EP93XX_REGS_H
+#define __ASM_ARCH_EP93XX_REGS_H
+
+/*
+ * EP93xx linux memory map:
+ *
+ * virt		phys		size
+ * fe800000			5M		per-platform mappings
+ * fed00000	80800000	2M		APB
+ * fef00000	80000000	1M		AHB
+ */
+
+#define EP93XX_AHB_PHYS_BASE		0x80000000
+#define EP93XX_AHB_VIRT_BASE		0xfef00000
+#define EP93XX_AHB_SIZE			0x00100000
+
+#define EP93XX_APB_PHYS_BASE		0x80800000
+#define EP93XX_APB_VIRT_BASE		0xfed00000
+#define EP93XX_APB_SIZE			0x00200000
+
+
+/* AHB peripherals */
+#define EP93XX_DMA_BASE			(EP93XX_AHB_VIRT_BASE + 0x00000000)
+
+#define EP93XX_ETHERNET_BASE		(EP93XX_AHB_VIRT_BASE + 0x00010000)
+#define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
+
+#define EP93XX_USB_BASE			(EP93XX_AHB_VIRT_BASE + 0x00020000)
+#define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
+
+#define EP93XX_RASTER_BASE		(EP93XX_AHB_VIRT_BASE + 0x00030000)
+
+#define EP93XX_GRAPHICS_ACCEL_BASE	(EP93XX_AHB_VIRT_BASE + 0x00040000)
+
+#define EP93XX_SDRAM_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00060000)
+
+#define EP93XX_PCMCIA_CONTROLLER_BASE	(EP93XX_AHB_VIRT_BASE + 0x00080000)
+
+#define EP93XX_BOOT_ROM_BASE		(EP93XX_AHB_VIRT_BASE + 0x00090000)
+
+#define EP93XX_IDE_BASE			(EP93XX_AHB_VIRT_BASE + 0x000a0000)
+
+#define EP93XX_VIC1_BASE		(EP93XX_AHB_VIRT_BASE + 0x000b0000)
+
+#define EP93XX_VIC2_BASE		(EP93XX_AHB_VIRT_BASE + 0x000c0000)
+
+
+/* APB peripherals */
+#define EP93XX_TIMER_BASE		(EP93XX_APB_VIRT_BASE + 0x00010000)
+#define EP93XX_TIMER_REG(x)		(EP93XX_TIMER_BASE + (x))
+#define EP93XX_TIMER1_LOAD		EP93XX_TIMER_REG(0x00)
+#define EP93XX_TIMER1_VALUE		EP93XX_TIMER_REG(0x04)
+#define EP93XX_TIMER1_CONTROL		EP93XX_TIMER_REG(0x08)
+#define EP93XX_TIMER1_CLEAR		EP93XX_TIMER_REG(0x0c)
+#define EP93XX_TIMER2_LOAD		EP93XX_TIMER_REG(0x20)
+#define EP93XX_TIMER2_VALUE		EP93XX_TIMER_REG(0x24)
+#define EP93XX_TIMER2_CONTROL		EP93XX_TIMER_REG(0x28)
+#define EP93XX_TIMER2_CLEAR		EP93XX_TIMER_REG(0x2c)
+#define EP93XX_TIMER4_VALUE_LOW		EP93XX_TIMER_REG(0x60)
+#define EP93XX_TIMER4_VALUE_HIGH	EP93XX_TIMER_REG(0x64)
+#define EP93XX_TIMER3_LOAD		EP93XX_TIMER_REG(0x80)
+#define EP93XX_TIMER3_VALUE		EP93XX_TIMER_REG(0x84)
+#define EP93XX_TIMER3_CONTROL		EP93XX_TIMER_REG(0x88)
+#define EP93XX_TIMER3_CLEAR		EP93XX_TIMER_REG(0x8c)
+
+#define EP93XX_I2S_BASE			(EP93XX_APB_VIRT_BASE + 0x00020000)
+
+#define EP93XX_SECURITY_BASE		(EP93XX_APB_VIRT_BASE + 0x00030000)
+
+#define EP93XX_GPIO_BASE		(EP93XX_APB_VIRT_BASE + 0x00040000)
+#define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
+#define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
+#define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
+#define EP93XX_GPIO_F_INT_ACK		EP93XX_GPIO_REG(0x54)
+#define EP93XX_GPIO_F_INT_ENABLE	EP93XX_GPIO_REG(0x58)
+#define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
+#define EP93XX_GPIO_A_INT_TYPE1		EP93XX_GPIO_REG(0x90)
+#define EP93XX_GPIO_A_INT_TYPE2		EP93XX_GPIO_REG(0x94)
+#define EP93XX_GPIO_A_INT_ACK		EP93XX_GPIO_REG(0x98)
+#define EP93XX_GPIO_A_INT_ENABLE	EP93XX_GPIO_REG(0x9c)
+#define EP93XX_GPIO_A_INT_STATUS	EP93XX_GPIO_REG(0xa0)
+#define EP93XX_GPIO_B_INT_TYPE1		EP93XX_GPIO_REG(0xac)
+#define EP93XX_GPIO_B_INT_TYPE2		EP93XX_GPIO_REG(0xb0)
+#define EP93XX_GPIO_B_INT_ACK		EP93XX_GPIO_REG(0xb4)
+#define EP93XX_GPIO_B_INT_ENABLE	EP93XX_GPIO_REG(0xb8)
+#define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
+
+#define EP93XX_AAC_BASE			(EP93XX_APB_VIRT_BASE + 0x00080000)
+
+#define EP93XX_SPI_BASE			(EP93XX_APB_VIRT_BASE + 0x000a0000)
+
+#define EP93XX_IRDA_BASE		(EP93XX_APB_VIRT_BASE + 0x000b0000)
+
+#define EP93XX_UART1_BASE		(EP93XX_APB_VIRT_BASE + 0x000c0000)
+#define EP93XX_UART1_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000c0000)
+
+#define EP93XX_UART2_BASE		(EP93XX_APB_VIRT_BASE + 0x000d0000)
+#define EP93XX_UART2_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000d0000)
+
+#define EP93XX_UART3_BASE		(EP93XX_APB_VIRT_BASE + 0x000e0000)
+#define EP93XX_UART3_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000e0000)
+
+#define EP93XX_KEY_MATRIX_BASE		(EP93XX_APB_VIRT_BASE + 0x000f0000)
+
+#define EP93XX_ADC_BASE			(EP93XX_APB_VIRT_BASE + 0x00100000)
+#define EP93XX_TOUCHSCREEN_BASE		(EP93XX_APB_VIRT_BASE + 0x00100000)
+
+#define EP93XX_PWM_BASE			(EP93XX_APB_VIRT_BASE + 0x00110000)
+
+#define EP93XX_RTC_BASE			(EP93XX_APB_VIRT_BASE + 0x00120000)
+
+#define EP93XX_SYSCON_BASE		(EP93XX_APB_VIRT_BASE + 0x00130000)
+#define EP93XX_SYSCON_REG(x)		(EP93XX_SYSCON_BASE + (x))
+#define EP93XX_SYSCON_POWER_STATE	EP93XX_SYSCON_REG(0x00)
+#define EP93XX_SYSCON_CLOCK_CONTROL	EP93XX_SYSCON_REG(0x04)
+#define EP93XX_SYSCON_CLOCK_UARTBAUD	0x20000000
+#define EP93XX_SYSCON_CLOCK_USH_EN	0x10000000
+#define EP93XX_SYSCON_HALT		EP93XX_SYSCON_REG(0x08)
+#define EP93XX_SYSCON_STANDBY		EP93XX_SYSCON_REG(0x0c)
+#define EP93XX_SYSCON_CLOCK_SET1	EP93XX_SYSCON_REG(0x20)
+#define EP93XX_SYSCON_CLOCK_SET2	EP93XX_SYSCON_REG(0x24)
+#define EP93XX_SYSCON_DEVICE_CONFIG	EP93XX_SYSCON_REG(0x80)
+#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE	0x00800000
+#define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
+
+#define EP93XX_WATCHDOG_BASE		(EP93XX_APB_VIRT_BASE + 0x00140000)
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/gesbc9312.h b/arch/arm/mach-ep93xx/include/mach/gesbc9312.h
new file mode 100644
index 000000000000..21fe2b922aa5
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/gesbc9312.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/gesbc9312.h
+ */
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio.h
new file mode 100644
index 000000000000..f7020414c5df
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/gpio.h
@@ -0,0 +1,128 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/gpio.h
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+/* GPIO port A.  */
+#define EP93XX_GPIO_LINE_A(x)		((x) + 0)
+#define EP93XX_GPIO_LINE_EGPIO0		EP93XX_GPIO_LINE_A(0)
+#define EP93XX_GPIO_LINE_EGPIO1		EP93XX_GPIO_LINE_A(1)
+#define EP93XX_GPIO_LINE_EGPIO2		EP93XX_GPIO_LINE_A(2)
+#define EP93XX_GPIO_LINE_EGPIO3		EP93XX_GPIO_LINE_A(3)
+#define EP93XX_GPIO_LINE_EGPIO4		EP93XX_GPIO_LINE_A(4)
+#define EP93XX_GPIO_LINE_EGPIO5		EP93XX_GPIO_LINE_A(5)
+#define EP93XX_GPIO_LINE_EGPIO6		EP93XX_GPIO_LINE_A(6)
+#define EP93XX_GPIO_LINE_EGPIO7		EP93XX_GPIO_LINE_A(7)
+
+/* GPIO port B.  */
+#define EP93XX_GPIO_LINE_B(x)		((x) + 8)
+#define EP93XX_GPIO_LINE_EGPIO8		EP93XX_GPIO_LINE_B(0)
+#define EP93XX_GPIO_LINE_EGPIO9		EP93XX_GPIO_LINE_B(1)
+#define EP93XX_GPIO_LINE_EGPIO10	EP93XX_GPIO_LINE_B(2)
+#define EP93XX_GPIO_LINE_EGPIO11	EP93XX_GPIO_LINE_B(3)
+#define EP93XX_GPIO_LINE_EGPIO12	EP93XX_GPIO_LINE_B(4)
+#define EP93XX_GPIO_LINE_EGPIO13	EP93XX_GPIO_LINE_B(5)
+#define EP93XX_GPIO_LINE_EGPIO14	EP93XX_GPIO_LINE_B(6)
+#define EP93XX_GPIO_LINE_EGPIO15	EP93XX_GPIO_LINE_B(7)
+
+/* GPIO port C.  */
+#define EP93XX_GPIO_LINE_C(x)		((x) + 40)
+#define EP93XX_GPIO_LINE_ROW0		EP93XX_GPIO_LINE_C(0)
+#define EP93XX_GPIO_LINE_ROW1		EP93XX_GPIO_LINE_C(1)
+#define EP93XX_GPIO_LINE_ROW2		EP93XX_GPIO_LINE_C(2)
+#define EP93XX_GPIO_LINE_ROW3		EP93XX_GPIO_LINE_C(3)
+#define EP93XX_GPIO_LINE_ROW4		EP93XX_GPIO_LINE_C(4)
+#define EP93XX_GPIO_LINE_ROW5		EP93XX_GPIO_LINE_C(5)
+#define EP93XX_GPIO_LINE_ROW6		EP93XX_GPIO_LINE_C(6)
+#define EP93XX_GPIO_LINE_ROW7		EP93XX_GPIO_LINE_C(7)
+
+/* GPIO port D.  */
+#define EP93XX_GPIO_LINE_D(x)		((x) + 24)
+#define EP93XX_GPIO_LINE_COL0		EP93XX_GPIO_LINE_D(0)
+#define EP93XX_GPIO_LINE_COL1		EP93XX_GPIO_LINE_D(1)
+#define EP93XX_GPIO_LINE_COL2		EP93XX_GPIO_LINE_D(2)
+#define EP93XX_GPIO_LINE_COL3		EP93XX_GPIO_LINE_D(3)
+#define EP93XX_GPIO_LINE_COL4		EP93XX_GPIO_LINE_D(4)
+#define EP93XX_GPIO_LINE_COL5		EP93XX_GPIO_LINE_D(5)
+#define EP93XX_GPIO_LINE_COL6		EP93XX_GPIO_LINE_D(6)
+#define EP93XX_GPIO_LINE_COL7		EP93XX_GPIO_LINE_D(7)
+
+/* GPIO port E.  */
+#define EP93XX_GPIO_LINE_E(x)		((x) + 32)
+#define EP93XX_GPIO_LINE_GRLED		EP93XX_GPIO_LINE_E(0)
+#define EP93XX_GPIO_LINE_RDLED		EP93XX_GPIO_LINE_E(1)
+#define EP93XX_GPIO_LINE_DIORn		EP93XX_GPIO_LINE_E(2)
+#define EP93XX_GPIO_LINE_IDECS1n	EP93XX_GPIO_LINE_E(3)
+#define EP93XX_GPIO_LINE_IDECS2n	EP93XX_GPIO_LINE_E(4)
+#define EP93XX_GPIO_LINE_IDEDA0		EP93XX_GPIO_LINE_E(5)
+#define EP93XX_GPIO_LINE_IDEDA1		EP93XX_GPIO_LINE_E(6)
+#define EP93XX_GPIO_LINE_IDEDA2		EP93XX_GPIO_LINE_E(7)
+
+/* GPIO port F.  */
+#define EP93XX_GPIO_LINE_F(x)		((x) + 16)
+#define EP93XX_GPIO_LINE_WP		EP93XX_GPIO_LINE_F(0)
+#define EP93XX_GPIO_LINE_MCCD1		EP93XX_GPIO_LINE_F(1)
+#define EP93XX_GPIO_LINE_MCCD2		EP93XX_GPIO_LINE_F(2)
+#define EP93XX_GPIO_LINE_MCBVD1		EP93XX_GPIO_LINE_F(3)
+#define EP93XX_GPIO_LINE_MCBVD2		EP93XX_GPIO_LINE_F(4)
+#define EP93XX_GPIO_LINE_VS1		EP93XX_GPIO_LINE_F(5)
+#define EP93XX_GPIO_LINE_READY		EP93XX_GPIO_LINE_F(6)
+#define EP93XX_GPIO_LINE_VS2		EP93XX_GPIO_LINE_F(7)
+
+/* GPIO port G.  */
+#define EP93XX_GPIO_LINE_G(x)		((x) + 48)
+#define EP93XX_GPIO_LINE_EECLK		EP93XX_GPIO_LINE_G(0)
+#define EP93XX_GPIO_LINE_EEDAT		EP93XX_GPIO_LINE_G(1)
+#define EP93XX_GPIO_LINE_SLA0		EP93XX_GPIO_LINE_G(2)
+#define EP93XX_GPIO_LINE_SLA1		EP93XX_GPIO_LINE_G(3)
+#define EP93XX_GPIO_LINE_DD12		EP93XX_GPIO_LINE_G(4)
+#define EP93XX_GPIO_LINE_DD13		EP93XX_GPIO_LINE_G(5)
+#define EP93XX_GPIO_LINE_DD14		EP93XX_GPIO_LINE_G(6)
+#define EP93XX_GPIO_LINE_DD15		EP93XX_GPIO_LINE_G(7)
+
+/* GPIO port H.  */
+#define EP93XX_GPIO_LINE_H(x)		((x) + 56)
+#define EP93XX_GPIO_LINE_DD0		EP93XX_GPIO_LINE_H(0)
+#define EP93XX_GPIO_LINE_DD1		EP93XX_GPIO_LINE_H(1)
+#define EP93XX_GPIO_LINE_DD2		EP93XX_GPIO_LINE_H(2)
+#define EP93XX_GPIO_LINE_DD3		EP93XX_GPIO_LINE_H(3)
+#define EP93XX_GPIO_LINE_DD4		EP93XX_GPIO_LINE_H(4)
+#define EP93XX_GPIO_LINE_DD5		EP93XX_GPIO_LINE_H(5)
+#define EP93XX_GPIO_LINE_DD6		EP93XX_GPIO_LINE_H(6)
+#define EP93XX_GPIO_LINE_DD7		EP93XX_GPIO_LINE_H(7)
+
+/* maximum value for gpio line identifiers */
+#define EP93XX_GPIO_LINE_MAX		EP93XX_GPIO_LINE_H(7)
+
+/* maximum value for irq capable line identifiers */
+#define EP93XX_GPIO_LINE_MAX_IRQ	EP93XX_GPIO_LINE_F(7)
+
+/* new generic GPIO API - see Documentation/gpio.txt */
+
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+/*
+ * Map GPIO A0..A7  (0..7)  to irq 64..71,
+ *          B0..B7  (7..15) to irq 72..79, and
+ *          F0..F7 (16..24) to irq 80..87.
+ */
+static inline int gpio_to_irq(unsigned gpio)
+{
+	if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
+		return 64 + gpio;
+
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return irq - gpio_to_irq(0);
+}
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
new file mode 100644
index 000000000000..529807d182bf
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/hardware.h
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "ep93xx-regs.h"
+
+#define pcibios_assign_all_busses()	0
+
+#include "platform.h"
+
+#include "gesbc9312.h"
+#include "ts72xx.h"
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
new file mode 100644
index 000000000000..1ab9a90ad339
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/io.h
+ */
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+#define __io(p)			((void __iomem *)(p))
+#define __mem_pci(p)		(p)
diff --git a/arch/arm/mach-ep93xx/include/mach/irqs.h b/arch/arm/mach-ep93xx/include/mach/irqs.h
new file mode 100644
index 000000000000..ff98390bbf0f
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/irqs.h
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/irqs.h
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define IRQ_EP93XX_COMMRX		2
+#define IRQ_EP93XX_COMMTX		3
+#define IRQ_EP93XX_TIMER1		4
+#define IRQ_EP93XX_TIMER2		5
+#define IRQ_EP93XX_AACINTR		6
+#define IRQ_EP93XX_DMAM2P0		7
+#define IRQ_EP93XX_DMAM2P1		8
+#define IRQ_EP93XX_DMAM2P2		9
+#define IRQ_EP93XX_DMAM2P3		10
+#define IRQ_EP93XX_DMAM2P4		11
+#define IRQ_EP93XX_DMAM2P5		12
+#define IRQ_EP93XX_DMAM2P6		13
+#define IRQ_EP93XX_DMAM2P7		14
+#define IRQ_EP93XX_DMAM2P8		15
+#define IRQ_EP93XX_DMAM2P9		16
+#define IRQ_EP93XX_DMAM2M0		17
+#define IRQ_EP93XX_DMAM2M1		18
+#define IRQ_EP93XX_GPIO0MUX		19
+#define IRQ_EP93XX_GPIO1MUX		20
+#define IRQ_EP93XX_GPIO2MUX		21
+#define IRQ_EP93XX_GPIO3MUX		22
+#define IRQ_EP93XX_UART1RX		23
+#define IRQ_EP93XX_UART1TX		24
+#define IRQ_EP93XX_UART2RX		25
+#define IRQ_EP93XX_UART2TX		26
+#define IRQ_EP93XX_UART3RX		27
+#define IRQ_EP93XX_UART3TX		28
+#define IRQ_EP93XX_KEY			29
+#define IRQ_EP93XX_TOUCH		30
+#define EP93XX_VIC1_VALID_IRQ_MASK	0x7ffffffc
+
+#define IRQ_EP93XX_EXT0			32
+#define IRQ_EP93XX_EXT1			33
+#define IRQ_EP93XX_EXT2			34
+#define IRQ_EP93XX_64HZ			35
+#define IRQ_EP93XX_WATCHDOG		36
+#define IRQ_EP93XX_RTC			37
+#define IRQ_EP93XX_IRDA			38
+#define IRQ_EP93XX_ETHERNET		39
+#define IRQ_EP93XX_EXT3			40
+#define IRQ_EP93XX_PROG			41
+#define IRQ_EP93XX_1HZ			42
+#define IRQ_EP93XX_VSYNC		43
+#define IRQ_EP93XX_VIDEO_FIFO		44
+#define IRQ_EP93XX_SSP1RX		45
+#define IRQ_EP93XX_SSP1TX		46
+#define IRQ_EP93XX_GPIO4MUX		47
+#define IRQ_EP93XX_GPIO5MUX		48
+#define IRQ_EP93XX_GPIO6MUX		49
+#define IRQ_EP93XX_GPIO7MUX		50
+#define IRQ_EP93XX_TIMER3		51
+#define IRQ_EP93XX_UART1		52
+#define IRQ_EP93XX_SSP			53
+#define IRQ_EP93XX_UART2		54
+#define IRQ_EP93XX_UART3		55
+#define IRQ_EP93XX_USB			56
+#define IRQ_EP93XX_ETHERNET_PME		57
+#define IRQ_EP93XX_DSP			58
+#define IRQ_EP93XX_GPIO_AB		59
+#define IRQ_EP93XX_SAI			60
+#define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
+
+#define NR_EP93XX_IRQS			(64 + 24)
+
+#define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
+#define EP93XX_BOARD_IRQS		32
+
+#define NR_IRQS				(NR_EP93XX_IRQS + EP93XX_BOARD_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h
new file mode 100644
index 000000000000..f1b633590752
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __bus_to_virt(x)	__phys_to_virt(x)
+#define __virt_to_bus(x)	__virt_to_phys(x)
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
new file mode 100644
index 000000000000..b5c182473f5d
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/platform.h
+ */
+
+#ifndef __ASSEMBLY__
+
+void ep93xx_map_io(void);
+void ep93xx_init_irq(void);
+void ep93xx_init_time(unsigned long);
+void ep93xx_init_devices(void);
+extern struct sys_timer ep93xx_timer;
+
+struct ep93xx_eth_data
+{
+	unsigned char	dev_addr[6];
+	unsigned char	phy_id;
+};
+
+
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
new file mode 100644
index 000000000000..67789d0f329e
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/system.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/system.h
+ */
+
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	u32 devicecfg;
+
+	local_irq_disable();
+
+	devicecfg = __raw_readl(EP93XX_SYSCON_DEVICE_CONFIG);
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(devicecfg | 0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+	__raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
+	__raw_writel(devicecfg & ~0x80000000, EP93XX_SYSCON_DEVICE_CONFIG);
+
+	while (1)
+		;
+}
diff --git a/arch/arm/mach-ep93xx/include/mach/timex.h b/arch/arm/mach-ep93xx/include/mach/timex.h
new file mode 100644
index 000000000000..6b3503b01fa6
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/timex.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/timex.h
+ */
+
+#define CLOCK_TICK_RATE		983040
diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
new file mode 100644
index 000000000000..30b318aa1a1f
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/ts72xx.h
+ */
+
+/*
+ * TS72xx memory map:
+ *
+ * virt		phys		size
+ * febff000	22000000	4K	model number register
+ * febfe000	22400000	4K	options register
+ * febfd000	22800000	4K	options register #2
+ * febfc000	[67]0000000	4K	NAND data register
+ * febfb000	[67]0400000	4K	NAND control register
+ * febfa000	[67]0800000	4K	NAND busy register
+ * febf9000	10800000	4K	TS-5620 RTC index register
+ * febf8000	11700000	4K	TS-5620 RTC data register
+ */
+
+#define TS72XX_MODEL_PHYS_BASE		0x22000000
+#define TS72XX_MODEL_VIRT_BASE		0xfebff000
+#define TS72XX_MODEL_SIZE		0x00001000
+
+#define TS72XX_MODEL_TS7200		0x00
+#define TS72XX_MODEL_TS7250		0x01
+#define TS72XX_MODEL_TS7260		0x02
+
+
+#define TS72XX_OPTIONS_PHYS_BASE	0x22400000
+#define TS72XX_OPTIONS_VIRT_BASE	0xfebfe000
+#define TS72XX_OPTIONS_SIZE		0x00001000
+
+#define TS72XX_OPTIONS_COM2_RS485	0x02
+#define TS72XX_OPTIONS_MAX197		0x01
+
+
+#define TS72XX_OPTIONS2_PHYS_BASE	0x22800000
+#define TS72XX_OPTIONS2_VIRT_BASE	0xfebfd000
+#define TS72XX_OPTIONS2_SIZE		0x00001000
+
+#define TS72XX_OPTIONS2_TS9420		0x04
+#define TS72XX_OPTIONS2_TS9420_BOOT	0x02
+
+
+#define TS72XX_NOR_PHYS_BASE		0x60000000
+#define TS72XX_NOR2_PHYS_BASE		0x62000000
+
+#define TS72XX_NAND1_DATA_PHYS_BASE	0x60000000
+#define TS72XX_NAND2_DATA_PHYS_BASE	0x70000000
+#define TS72XX_NAND_DATA_VIRT_BASE	0xfebfc000
+#define TS72XX_NAND_DATA_SIZE		0x00001000
+
+#define TS72XX_NAND1_CONTROL_PHYS_BASE	0x60400000
+#define TS72XX_NAND2_CONTROL_PHYS_BASE	0x70400000
+#define TS72XX_NAND_CONTROL_VIRT_BASE	0xfebfb000
+#define TS72XX_NAND_CONTROL_SIZE	0x00001000
+
+#define TS72XX_NAND1_BUSY_PHYS_BASE	0x60800000
+#define TS72XX_NAND2_BUSY_PHYS_BASE	0x70800000
+#define TS72XX_NAND_BUSY_VIRT_BASE	0xfebfa000
+#define TS72XX_NAND_BUSY_SIZE		0x00001000
+
+
+#define TS72XX_RTC_INDEX_VIRT_BASE	0xfebf9000
+#define TS72XX_RTC_INDEX_PHYS_BASE	0x10800000
+#define TS72XX_RTC_INDEX_SIZE		0x00001000
+
+#define TS72XX_RTC_DATA_VIRT_BASE	0xfebf8000
+#define TS72XX_RTC_DATA_PHYS_BASE	0x11700000
+#define TS72XX_RTC_DATA_SIZE		0x00001000
+
+
+#ifndef __ASSEMBLY__
+#include <asm/io.h>
+
+static inline int board_is_ts7200(void)
+{
+	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200;
+}
+
+static inline int board_is_ts7250(void)
+{
+	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250;
+}
+
+static inline int board_is_ts7260(void)
+{
+	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
+}
+
+static inline int is_max197_installed(void)
+{
+	return !!(__raw_readb(TS72XX_OPTIONS_VIRT_BASE) &
+					TS72XX_OPTIONS_MAX197);
+}
+
+static inline int is_ts9420_installed(void)
+{
+	return !!(__raw_readb(TS72XX_OPTIONS2_VIRT_BASE) &
+					TS72XX_OPTIONS2_TS9420);
+}
+#endif
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
new file mode 100644
index 000000000000..1fd2f17de325
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h
@@ -0,0 +1,85 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <mach/ep93xx-regs.h>
+
+static unsigned char __raw_readb(unsigned int ptr)
+{
+	return *((volatile unsigned char *)ptr);
+}
+
+static unsigned int __raw_readl(unsigned int ptr)
+{
+	return *((volatile unsigned int *)ptr);
+}
+
+static void __raw_writeb(unsigned char value, unsigned int ptr)
+{
+	*((volatile unsigned char *)ptr) = value;
+}
+
+static void __raw_writel(unsigned int value, unsigned int ptr)
+{
+	*((volatile unsigned int *)ptr) = value;
+}
+
+
+#define PHYS_UART1_DATA		0x808c0000
+#define PHYS_UART1_FLAG		0x808c0018
+#define UART1_FLAG_TXFF		0x20
+
+static inline void putc(int c)
+{
+	int i;
+
+	for (i = 0; i < 1000; i++) {
+		/* Transmit fifo not full?  */
+		if (!(__raw_readb(PHYS_UART1_FLAG) & UART1_FLAG_TXFF))
+			break;
+	}
+
+	__raw_writeb(c, PHYS_UART1_DATA);
+}
+
+static inline void flush(void)
+{
+}
+
+
+/*
+ * Some bootloaders don't turn off DMA from the ethernet MAC before
+ * jumping to linux, which means that we might end up with bits of RX
+ * status and packet data scribbled over the uncompressed kernel image.
+ * Work around this by resetting the ethernet MAC before we uncompress.
+ */
+#define PHYS_ETH_SELF_CTL		0x80010020
+#define ETH_SELF_CTL_RESET		0x00000001
+
+static void ethernet_reset(void)
+{
+	unsigned int v;
+
+	/* Reset the ethernet MAC.  */
+	v = __raw_readl(PHYS_ETH_SELF_CTL);
+	__raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
+
+	/* Wait for reset to finish.  */
+	while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
+		;
+}
+
+
+static void arch_decomp_setup(void)
+{
+	ethernet_reset();
+}
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ep93xx/include/mach/vmalloc.h b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
new file mode 100644
index 000000000000..aed21cd3fe2d
--- /dev/null
+++ b/arch/arm/mach-ep93xx/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index f28c1294cae1..de047a5c8112 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -20,7 +20,7 @@
 #include <linux/mtd/physmap.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 3a4bf90ba832..c3cbff126d0c 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -20,7 +20,7 @@
 #include <linux/platform_device.h>
 #include <linux/m48t86.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c
index 09c1fbc51876..4e10090cd87f 100644
--- a/arch/arm/mach-footbridge/ebsa285-leds.c
+++ b/arch/arm/mach-footbridge/ebsa285-leds.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
new file mode 100644
index 000000000000..4329b8123570
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -0,0 +1,57 @@
+/* arch/arm/mach-footbridge/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware/dec21285.h>
+
+#ifndef CONFIG_DEBUG_DC21285_PORT
+	/* For NetWinder debugging */
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x7c000000	@ physical
+		movne	\rx, #0xff000000	@ virtual
+		orr	\rx, \rx, #0x000003f8
+		.endm
+
+#define UART_SHIFT	0
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
+
+#else
+	/* For EBSA285 debugging */
+		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
+		.equ	dc21285_low,  ARMCSR_BASE & 0x00ffffff
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x42000000
+		movne	\rx, #dc21285_high
+		.if	dc21285_low
+		orrne	\rx, \rx, #dc21285_low
+		.endif
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x160]	@ UARTDR
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x178]	@ UARTFLG
+		tst	\rd, #1 << 3
+		bne	1001b
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/dma.h b/arch/arm/mach-footbridge/include/mach/dma.h
new file mode 100644
index 000000000000..62afd213effb
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/dma.h
@@ -0,0 +1,25 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/dma.h
+ *
+ *  Architecture DMA routines
+ *
+ *  Copyright (C) 1998,1999 Russell King
+ *  Copyright (C) 1998,1999 Philip Blundell
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * The 21285 has two internal DMA channels; we call these 8 and 9.
+ * On CATS hardware we have an additional eight ISA dma channels
+ * numbered 0..7.
+ */
+#define _ISA_DMA(x)		(0+(x))
+#define _DC21285_DMA(x)		(8+(x))
+
+#define MAX_DMA_CHANNELS	10
+
+#define DMA_FLOPPY		_ISA_DMA(2)
+#define DMA_ISA_CASCADE		_ISA_DMA(4)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-footbridge/include/mach/entry-macro.S b/arch/arm/mach-footbridge/include/mach/entry-macro.S
new file mode 100644
index 000000000000..d3847be0c667
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/entry-macro.S
@@ -0,0 +1,113 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for footbridge-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <asm/hardware/dec21285.h>
+
+		.equ	dc21285_high, ARMCSR_BASE & 0xff000000
+		.equ	dc21285_low, ARMCSR_BASE & 0x00ffffff
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		mov	\base, #dc21285_high
+		.if	dc21285_low
+		orr	\base, \base, #dc21285_low
+		.endif
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base, #0x180]	@ get interrupts
+
+		mov	\irqnr, #IRQ_SDRAMPARITY
+		tst	\irqstat, #IRQ_MASK_SDRAMPARITY
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_UART_RX
+		movne	\irqnr, #IRQ_CONRX
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DMA1
+		movne	\irqnr, #IRQ_DMA1
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DMA2
+		movne	\irqnr, #IRQ_DMA2
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN0
+		movne	\irqnr, #IRQ_IN0
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN1
+		movne	\irqnr, #IRQ_IN1
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN2
+		movne	\irqnr, #IRQ_IN2
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_IN3
+		movne	\irqnr, #IRQ_IN3
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI
+		movne	\irqnr, #IRQ_PCI
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DOORBELLHOST
+		movne	\irqnr, #IRQ_DOORBELLHOST
+		bne     1001f
+
+		tst	\irqstat, #IRQ_MASK_I2OINPOST
+		movne	\irqnr, #IRQ_I2OINPOST
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_TIMER1
+		movne	\irqnr, #IRQ_TIMER1
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_TIMER2
+		movne	\irqnr, #IRQ_TIMER2
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_TIMER3
+		movne	\irqnr, #IRQ_TIMER3
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_UART_TX
+		movne	\irqnr, #IRQ_CONTX
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_ABORT
+		movne	\irqnr, #IRQ_PCI_ABORT
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_SERR
+		movne	\irqnr, #IRQ_PCI_SERR
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_DISCARD_TIMER
+		movne	\irqnr, #IRQ_DISCARD_TIMER
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_DPERR
+		movne	\irqnr, #IRQ_PCI_DPERR
+		bne	1001f
+
+		tst	\irqstat, #IRQ_MASK_PCI_PERR
+		movne	\irqnr, #IRQ_PCI_PERR
+1001:
+		.endm
+
diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h
new file mode 100644
index 000000000000..ffaea90486f9
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/hardware.h
@@ -0,0 +1,105 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/hardware.h
+ *
+ *  Copyright (C) 1998-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains the hardware definitions of the EBSA-285.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/memory.h>
+
+/*   Virtual      Physical	Size
+ * 0xff800000	0x40000000	1MB	X-Bus
+ * 0xff000000	0x7c000000	1MB	PCI I/O space
+ * 0xfe000000	0x42000000	1MB	CSR
+ * 0xfd000000	0x78000000	1MB	Outbound write flush (not supported)
+ * 0xfc000000	0x79000000	1MB	PCI IACK/special space
+ * 0xfb000000	0x7a000000	16MB	PCI Config type 1
+ * 0xfa000000	0x7b000000	16MB	PCI Config type 0
+ * 0xf9000000	0x50000000	1MB	Cache flush
+ * 0xf0000000	0x80000000	16MB	ISA memory
+ */
+#define XBUS_SIZE		0x00100000
+#define XBUS_BASE		0xff800000
+
+#define PCIO_SIZE		0x00100000
+#define PCIO_BASE		0xff000000
+
+#define ARMCSR_SIZE		0x00100000
+#define ARMCSR_BASE		0xfe000000
+
+#define WFLUSH_SIZE		0x00100000
+#define WFLUSH_BASE		0xfd000000
+
+#define PCIIACK_SIZE		0x00100000
+#define PCIIACK_BASE		0xfc000000
+
+#define PCICFG1_SIZE		0x01000000
+#define PCICFG1_BASE		0xfb000000
+
+#define PCICFG0_SIZE		0x01000000
+#define PCICFG0_BASE		0xfa000000
+
+#define PCIMEM_SIZE		0x01000000
+#define PCIMEM_BASE		0xf0000000
+
+#define XBUS_LEDS		((volatile unsigned char *)(XBUS_BASE + 0x12000))
+#define XBUS_LED_AMBER		(1 << 0)
+#define XBUS_LED_GREEN		(1 << 1)
+#define XBUS_LED_RED		(1 << 2)
+#define XBUS_LED_TOGGLE		(1 << 8)
+
+#define XBUS_SWITCH		((volatile unsigned char *)(XBUS_BASE + 0x12000))
+#define XBUS_SWITCH_SWITCH	((*XBUS_SWITCH) & 15)
+#define XBUS_SWITCH_J17_13	((*XBUS_SWITCH) & (1 << 4))
+#define XBUS_SWITCH_J17_11	((*XBUS_SWITCH) & (1 << 5))
+#define XBUS_SWITCH_J17_9	((*XBUS_SWITCH) & (1 << 6))
+
+#define UNCACHEABLE_ADDR	(ARMCSR_BASE + 0x108)
+
+
+/* PIC irq control */
+#define PIC_LO			0x20
+#define PIC_MASK_LO		0x21
+#define PIC_HI			0xA0
+#define PIC_MASK_HI		0xA1
+
+/* GPIO pins */
+#define GPIO_CCLK		0x800
+#define GPIO_DSCLK		0x400
+#define GPIO_E2CLK		0x200
+#define GPIO_IOLOAD		0x100
+#define GPIO_RED_LED		0x080
+#define GPIO_WDTIMER		0x040
+#define GPIO_DATA		0x020
+#define GPIO_IOCLK		0x010
+#define GPIO_DONE		0x008
+#define GPIO_FAN		0x004
+#define GPIO_GREEN_LED		0x002
+#define GPIO_RESET		0x001
+
+/* CPLD pins */
+#define CPLD_DS_ENABLE		8
+#define CPLD_7111_DISABLE	4
+#define CPLD_UNMUTE		2
+#define CPLD_FLASH_WR_ENABLE	1
+
+#ifndef __ASSEMBLY__
+extern void gpio_modify_op(int mask, int set);
+extern void gpio_modify_io(int mask, int in);
+extern int  gpio_read(void);
+extern void cpld_modify(int mask, int set);
+#endif
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM 	0x81000000
+
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h
new file mode 100644
index 000000000000..a7b066239996
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/io.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/io.h
+ *
+ *  Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Modifications:
+ *   06-12-1997	RMK	Created.
+ *   07-04-1999	RMK	Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * Translation of various region addresses to virtual addresses
+ */
+#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
+#if 1
+#define __mem_pci(a)		(a)
+#else
+
+static inline void __iomem *___mem_pci(void __iomem *p)
+{
+	unsigned long a = (unsigned long)p;
+	BUG_ON(a <= 0xc0000000 || a >= 0xe0000000);
+	return p;
+}
+
+#define __mem_pci(a)		___mem_pci(a)
+#endif
+
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/irqs.h b/arch/arm/mach-footbridge/include/mach/irqs.h
new file mode 100644
index 000000000000..400551e43e4e
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/irqs.h
@@ -0,0 +1,98 @@
+/*
+ * arch/arm/mach-footbridge/include/mach/irqs.h
+ *
+ * Copyright (C) 1998 Russell King
+ * Copyright (C) 1998 Phil Blundell
+ *
+ * Changelog:
+ *  20-Jan-1998	RMK	Started merge of EBSA286, CATS and NetWinder
+ *  01-Feb-1999	PJB	ISA IRQs start at 0 not 16
+ */
+#include <asm/mach-types.h>
+
+#define NR_IRQS			36
+#define NR_DC21285_IRQS		16
+
+#define _ISA_IRQ(x)		(0 + (x))
+#define _ISA_INR(x)		((x) - 0)
+#define _DC21285_IRQ(x)		(16 + (x))
+#define _DC21285_INR(x)		((x) - 16)
+
+/*
+ * This is a list of all interrupts that the 21285
+ * can generate and we handle.
+ */
+#define IRQ_CONRX		_DC21285_IRQ(0)
+#define IRQ_CONTX		_DC21285_IRQ(1)
+#define IRQ_TIMER1		_DC21285_IRQ(2)
+#define IRQ_TIMER2		_DC21285_IRQ(3)
+#define IRQ_TIMER3		_DC21285_IRQ(4)
+#define IRQ_IN0			_DC21285_IRQ(5)
+#define IRQ_IN1			_DC21285_IRQ(6)
+#define IRQ_IN2			_DC21285_IRQ(7)
+#define IRQ_IN3			_DC21285_IRQ(8)
+#define IRQ_DOORBELLHOST	_DC21285_IRQ(9)
+#define IRQ_DMA1		_DC21285_IRQ(10)
+#define IRQ_DMA2		_DC21285_IRQ(11)
+#define IRQ_PCI			_DC21285_IRQ(12)
+#define IRQ_SDRAMPARITY		_DC21285_IRQ(13)
+#define IRQ_I2OINPOST		_DC21285_IRQ(14)
+#define IRQ_PCI_ABORT		_DC21285_IRQ(15)
+#define IRQ_PCI_SERR		_DC21285_IRQ(16)
+#define IRQ_DISCARD_TIMER	_DC21285_IRQ(17)
+#define IRQ_PCI_DPERR		_DC21285_IRQ(18)
+#define IRQ_PCI_PERR		_DC21285_IRQ(19)
+
+#define IRQ_ISA_TIMER		_ISA_IRQ(0)
+#define IRQ_ISA_KEYBOARD	_ISA_IRQ(1)
+#define IRQ_ISA_CASCADE		_ISA_IRQ(2)
+#define IRQ_ISA_UART2		_ISA_IRQ(3)
+#define IRQ_ISA_UART		_ISA_IRQ(4)
+#define IRQ_ISA_FLOPPY		_ISA_IRQ(6)
+#define IRQ_ISA_PRINTER		_ISA_IRQ(7)
+#define IRQ_ISA_RTC_ALARM	_ISA_IRQ(8)
+#define IRQ_ISA_2		_ISA_IRQ(9)
+#define IRQ_ISA_PS2MOUSE	_ISA_IRQ(12)
+#define IRQ_ISA_HARDDISK1	_ISA_IRQ(14)
+#define IRQ_ISA_HARDDISK2	_ISA_IRQ(15)
+
+#define IRQ_MASK_UART_RX	(1 << 2)
+#define IRQ_MASK_UART_TX	(1 << 3)
+#define IRQ_MASK_TIMER1		(1 << 4)
+#define IRQ_MASK_TIMER2		(1 << 5)
+#define IRQ_MASK_TIMER3		(1 << 6)
+#define IRQ_MASK_IN0		(1 << 8)
+#define IRQ_MASK_IN1		(1 << 9)
+#define IRQ_MASK_IN2		(1 << 10)
+#define IRQ_MASK_IN3		(1 << 11)
+#define IRQ_MASK_DOORBELLHOST	(1 << 15)
+#define IRQ_MASK_DMA1		(1 << 16)
+#define IRQ_MASK_DMA2		(1 << 17)
+#define IRQ_MASK_PCI		(1 << 18)
+#define IRQ_MASK_SDRAMPARITY	(1 << 24)
+#define IRQ_MASK_I2OINPOST	(1 << 25)
+#define IRQ_MASK_PCI_ABORT	((1 << 29) | (1 << 30))
+#define IRQ_MASK_PCI_SERR	(1 << 23)
+#define IRQ_MASK_DISCARD_TIMER	(1 << 27)
+#define IRQ_MASK_PCI_DPERR	(1 << 28)
+#define IRQ_MASK_PCI_PERR	(1 << 31)
+
+/*
+ * Netwinder interrupt allocations
+ */
+#define IRQ_NETWINDER_ETHER10	IRQ_IN0
+#define IRQ_NETWINDER_ETHER100	IRQ_IN1
+#define IRQ_NETWINDER_VIDCOMP	IRQ_IN2
+#define IRQ_NETWINDER_PS2MOUSE	_ISA_IRQ(5)
+#define IRQ_NETWINDER_IR	_ISA_IRQ(6)
+#define IRQ_NETWINDER_BUTTON	_ISA_IRQ(10)
+#define IRQ_NETWINDER_VGA	_ISA_IRQ(11)
+#define IRQ_NETWINDER_SOUND	_ISA_IRQ(12)
+
+#undef RTC_IRQ
+#define RTC_IRQ		IRQ_ISA_RTC_ALARM
+#define I8042_KBD_IRQ	IRQ_ISA_KEYBOARD
+#define I8042_AUX_IRQ	(machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE)
+#define IRQ_FLOPPYDISK	IRQ_ISA_FLOPPY
+
+#define irq_canonicalize(_i)	(((_i) == IRQ_ISA_CASCADE) ? IRQ_ISA_2 : _i)
diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
new file mode 100644
index 000000000000..e9cae99dd1f9
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -0,0 +1,67 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/memory.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   20-Oct-1996 RMK	Created
+ *   31-Dec-1997 RMK	Fixed definitions to reduce warnings.
+ *   17-May-1998 DAG	Added __virt_to_bus and __bus_to_virt functions.
+ *   21-Nov-1998 RMK	Changed __virt_to_bus and __bus_to_virt to macros.
+ *   21-Mar-1999 RMK	Added PAGE_OFFSET for co285 architecture.
+ *			Renamed to memory.h
+ *			Moved PAGE_OFFSET and TASK_SIZE here
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+
+#if defined(CONFIG_FOOTBRIDGE_ADDIN)
+/*
+ * If we may be using add-in footbridge mode, then we must
+ * use the out-of-line translation that makes use of the
+ * PCI BAR
+ */
+#ifndef __ASSEMBLY__
+extern unsigned long __virt_to_bus(unsigned long);
+extern unsigned long __bus_to_virt(unsigned long);
+#endif
+
+#elif defined(CONFIG_FOOTBRIDGE_HOST)
+
+#define __virt_to_bus(x)	((x) - 0xe0000000)
+#define __bus_to_virt(x)	((x) + 0xe0000000)
+
+#else
+
+#error "Undefined footbridge mode"
+
+#endif
+
+/* Task size and page offset at 3GB */
+#define TASK_SIZE		UL(0xbf000000)
+#define PAGE_OFFSET		UL(0xc0000000)
+
+/*
+ * Cache flushing area.
+ */
+#define FLUSH_BASE		0xf9000000
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		UL(0x00000000)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
+
+#define FLUSH_BASE_PHYS		0x50000000
+
+#endif
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
new file mode 100644
index 000000000000..01c9f407f498
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/system.h
@@ -0,0 +1,69 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/system.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/hardware/dec21285.h>
+#include <asm/io.h>
+#include <mach/hardware.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	if (mode == 's') {
+		/*
+		 * Jump into the ROM
+		 */
+		cpu_reset(0x41000000);
+	} else {
+		if (machine_is_netwinder()) {
+			/* open up the SuperIO chip
+			 */
+			outb(0x87, 0x370);
+			outb(0x87, 0x370);
+
+			/* aux function group 1 (logical device 7)
+			 */
+			outb(0x07, 0x370);
+			outb(0x07, 0x371);
+
+			/* set GP16 for WD-TIMER output
+			 */
+			outb(0xe6, 0x370);
+			outb(0x00, 0x371);
+
+			/* set a RED LED and toggle WD_TIMER for rebooting
+			 */
+			outb(0xc4, 0x338);
+		} else {
+			/* 
+			 * Force the watchdog to do a CPU reset.
+			 *
+			 * After making sure that the watchdog is disabled
+			 * (so we can change the timer registers) we first
+			 * enable the timer to autoreload itself.  Next, the
+			 * timer interval is set really short and any
+			 * current interrupt request is cleared (so we can
+			 * see an edge transition).  Finally, TIMER4 is
+			 * enabled as the watchdog.
+			 */
+			*CSR_SA110_CNTL &= ~(1 << 13);
+			*CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
+					   TIMER_CNTL_AUTORELOAD |
+					   TIMER_CNTL_DIV16;
+			*CSR_TIMER4_LOAD = 0x2;
+			*CSR_TIMER4_CLR  = 0;
+			*CSR_SA110_CNTL |= (1 << 13);
+		}
+	}
+}
diff --git a/arch/arm/mach-footbridge/include/mach/timex.h b/arch/arm/mach-footbridge/include/mach/timex.h
new file mode 100644
index 000000000000..d0fea9d6d4ab
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/timex.h
@@ -0,0 +1,18 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/timex.h
+ *
+ *  Copyright (C) 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  EBSA285 architecture timex specifications
+ */
+
+/*
+ * We assume a constant here; this satisfies the maths in linux/timex.h
+ * and linux/time.h.  CLOCK_TICK_RATE is actually system dependent, but
+ * this must be a constant.
+ */
+#define CLOCK_TICK_RATE		(50000000/16)
diff --git a/arch/arm/mach-footbridge/include/mach/uncompress.h b/arch/arm/mach-footbridge/include/mach/uncompress.h
new file mode 100644
index 000000000000..5dfa44287346
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/uncompress.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1996-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/mach-types.h>
+
+/*
+ * Note! This could cause problems on the NetWinder
+ */
+#define DC21285_BASE ((volatile unsigned int *)0x42000160)
+#define SER0_BASE    ((volatile unsigned char *)0x7c0003f8)
+
+static inline void putc(char c)
+{
+	if (machine_is_netwinder()) {
+		while ((SER0_BASE[5] & 0x60) != 0x60)
+			barrier();
+		SER0_BASE[0] = c;
+	} else {
+		while (DC21285_BASE[6] & 8);
+		DC21285_BASE[0] = c;
+	}
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-footbridge/include/mach/vmalloc.h b/arch/arm/mach-footbridge/include/mach/vmalloc.h
new file mode 100644
index 000000000000..d0958d860a3c
--- /dev/null
+++ b/arch/arm/mach-footbridge/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ *  arch/arm/mach-footbridge/include/mach/vmalloc.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#define VMALLOC_END       (PAGE_OFFSET + 0x30000000)
diff --git a/arch/arm/mach-footbridge/isa-irq.c b/arch/arm/mach-footbridge/isa-irq.c
index 79443ffc8916..7132e522c366 100644
--- a/arch/arm/mach-footbridge/isa-irq.c
+++ b/arch/arm/mach-footbridge/isa-irq.c
@@ -21,7 +21,7 @@
 
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/dec21285.h>
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c
index 8e9cac5a213b..d91a4f4a32dc 100644
--- a/arch/arm/mach-footbridge/netwinder-leds.c
+++ b/arch/arm/mach-footbridge/netwinder-leds.c
@@ -21,7 +21,7 @@
 #include <linux/init.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c
index d5cfcda385d6..fd9a7c11d62d 100644
--- a/arch/arm/mach-footbridge/time.c
+++ b/arch/arm/mach-footbridge/time.c
@@ -1,5 +1,5 @@
 /*
- *  linux/include/asm-arm/arch-ebsa285/time.h
+ *  arch/arm/mach-footbridge/include/mach/time.h
  *
  *  Copyright (C) 1998 Russell King.
  *  Copyright (C) 1998 Phil Blundell
@@ -23,7 +23,7 @@
 #include <linux/mc146818rtc.h>
 #include <linux/bcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 45144ad2bed9..b5f9741ae13c 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -23,11 +23,11 @@
 #include <asm/pgtable.h>
 #include <asm/dma.h>
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include <asm/mach/dma.h>
 
diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c
index c2a431f482f0..24df2a349a98 100644
--- a/arch/arm/mach-h720x/cpu-h7201.c
+++ b/arch/arm/mach-h720x/cpu-h7201.c
@@ -17,9 +17,9 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <asm/types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include "common.h"
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
index c627fa124eb3..53e1f62f2e79 100644
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -17,9 +17,9 @@
 #include <linux/interrupt.h>
 #include <linux/module.h>
 #include <asm/types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <linux/device.h>
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 407cd4c0aa8a..78be457dc324 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -25,7 +25,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include "common.h"
 
 MACHINE_START(H7201, "Hynix GMS30C7201")
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index bf2acdce62e5..56161d55cf47 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -25,7 +25,7 @@
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include "common.h"
 
 static struct resource cirrus_resources[] = {
diff --git a/arch/arm/mach-h720x/include/mach/boards.h b/arch/arm/mach-h720x/include/mach/boards.h
new file mode 100644
index 000000000000..079b279e1242
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/boards.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-h720x/include/mach/boards.h
+ *
+ * Copyright (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ * This file contains the board specific defines for various devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_INCMACH_H
+#error Do not include this file directly. Include asm/hardware.h instead !
+#endif
+
+/* Hynix H7202 developer board specific device defines */
+#ifdef CONFIG_ARCH_H7202
+
+/* FLASH */
+#define FLASH_VIRT		0xd0000000
+#define FLASH_PHYS		0x00000000
+#define FLASH_SIZE		0x02000000
+
+/* onboard LAN controller */
+# define ETH0_PHYS		0x08000000
+
+/* Touch screen defines */
+/* GPIO Port */
+#define PEN_GPIO		GPIO_B_VIRT
+/* Bitmask for pen down interrupt */
+#define PEN_INT_BIT		(1<<7)
+/* Bitmask for pen up interrupt */
+#define PEN_ENA_BIT		(1<<6)
+/* pen up interrupt */
+#define IRQ_PEN			IRQ_MUX_GPIOB(7)
+
+#endif
+
+/* Hynix H7201 developer board specific device defines */
+#if defined (CONFIG_ARCH_H7201)
+/* ROM DISK SPACE */
+#define ROM_DISK_BASE           0xc1800000
+#define ROM_DISK_START          0x41800000
+#define ROM_DISK_SIZE           0x00700000
+
+/* SRAM DISK SPACE */
+#define SRAM_DISK_BASE          0xf1000000
+#define SRAM_DISK_START         0x04000000
+#define SRAM_DISK_SIZE          0x00400000
+#endif
+
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
new file mode 100644
index 000000000000..6294a1344dda
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -0,0 +1,40 @@
+/* arch/arm/mach-h720x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.equ    io_virt, IO_BASE
+		.equ    io_phys, IO_START
+
+		.macro  addruart,rx
+		mrc     p15, 0, \rx, c1, c0
+		tst     \rx, #1  	       @ MMU enabled?
+		moveq   \rx, #io_phys	       @ physical base address
+		movne   \rx, #io_virt	       @ virtual address
+		add     \rx, \rx, #0x00020000   @ UART1
+		.endm
+
+		.macro  senduart,rd,rx
+		str     \rd, [\rx, #0x0]        @ UARTDR
+
+		.endm
+
+		.macro  waituart,rd,rx
+1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
+		tst     \rd, #1 << 5	       @ UARTFLGUTXFF - 1 when full
+		bne     1001b
+		.endm
+
+		.macro  busyuart,rd,rx
+1001:		ldr     \rd, [\rx, #0x18]       @ UARTFLG
+		tst     \rd, #1 << 3	       @ UARTFLGUBUSY - 1 when busy
+		bne     1001b
+		.endm
diff --git a/arch/arm/mach-h720x/include/mach/dma.h b/arch/arm/mach-h720x/include/mach/dma.h
new file mode 100644
index 000000000000..0a9d86ee84fe
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/dma.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-h720x/include/mach/dma.h
+ *
+ * Architecture DMA routes
+ *
+ * Copyright (C) 1997.1998 Russell King
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS		0xd0000000
+
+#if defined (CONFIG_CPU_H7201)
+#define MAX_DMA_CHANNELS	3
+#elif defined (CONFIG_CPU_H7202)
+#define MAX_DMA_CHANNELS	4
+#else
+#error processor definition missmatch
+#endif
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-h720x/include/mach/entry-macro.S b/arch/arm/mach-h720x/include/mach/entry-macro.S
new file mode 100644
index 000000000000..6d3b917c4a18
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/entry-macro.S
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-h720x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Hynix HMS720x based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
+		@ we could use the id register on H7202, but this is not
+		@ properly updated when we come back from asm_do_irq
+		@ without a previous return from interrupt
+		@ (see loops below in irq_svc, irq_usr)
+		@ We see unmasked pending ints only, as the masked pending ints
+		@ are not visible here
+
+		mov     \base, #0xf0000000	       @ base register
+		orr     \base, \base, #0x24000	       @ irqbase
+		ldr     \irqstat, [\base, #0x04]        @ get interrupt status
+#if defined (CONFIG_CPU_H7201)
+		ldr	\tmp, =0x001fffff
+#else
+		mvn     \tmp, #0xc0000000
+#endif
+		and     \irqstat, \irqstat, \tmp        @ mask out unused ints
+		mov     \irqnr, #0
+
+		mov     \tmp, #0xff00
+		orr     \tmp, \tmp, #0xff
+		tst     \irqstat, \tmp
+		addeq   \irqnr, \irqnr, #16
+		moveq   \irqstat, \irqstat, lsr #16
+		tst     \irqstat, #255
+		addeq   \irqnr, \irqnr, #8
+		moveq   \irqstat, \irqstat, lsr #8
+		tst     \irqstat, #15
+		addeq   \irqnr, \irqnr, #4
+		moveq   \irqstat, \irqstat, lsr #4
+		tst     \irqstat, #3
+		addeq   \irqnr, \irqnr, #2
+		moveq   \irqstat, \irqstat, lsr #2
+		tst     \irqstat, #1
+		addeq   \irqnr, \irqnr, #1
+		moveq   \irqstat, \irqstat, lsr #1
+		tst     \irqstat, #1		       @ bit 0 should be set
+		.endm
+
+		.macro  irq_prio_table
+		.endm
+
+#else
+#error hynix processor selection missmatch
+#endif
+
diff --git a/arch/arm/mach-h720x/include/mach/h7201-regs.h b/arch/arm/mach-h720x/include/mach/h7201-regs.h
new file mode 100644
index 000000000000..611b4947ccfc
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/h7201-regs.h
@@ -0,0 +1,67 @@
+/*
+ * arch/arm/mach-h720x/include/mach/h7201-regs.h
+ *
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
+ *
+ * This file contains the hardware definitions of the h720x processors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not add implementations specific defines here. This files contains
+ * only defines of the onchip peripherals. Add those defines to boards.h,
+ * which is included by this file.
+ */
+
+#define SERIAL2_VIRT 		(IO_VIRT + 0x50100)
+#define SERIAL3_VIRT 		(IO_VIRT + 0x50200)
+
+/*
+ * PCMCIA
+ */
+#define PCMCIA0_ATT_BASE        0xe5000000
+#define PCMCIA0_ATT_SIZE        0x00200000
+#define PCMCIA0_ATT_START       0x20000000
+#define PCMCIA0_MEM_BASE        0xe5200000
+#define PCMCIA0_MEM_SIZE        0x00200000
+#define PCMCIA0_MEM_START       0x24000000
+#define PCMCIA0_IO_BASE         0xe5400000
+#define PCMCIA0_IO_SIZE         0x00200000
+#define PCMCIA0_IO_START        0x28000000
+
+#define PCMCIA1_ATT_BASE        0xe5600000
+#define PCMCIA1_ATT_SIZE        0x00200000
+#define PCMCIA1_ATT_START       0x30000000
+#define PCMCIA1_MEM_BASE        0xe5800000
+#define PCMCIA1_MEM_SIZE        0x00200000
+#define PCMCIA1_MEM_START       0x34000000
+#define PCMCIA1_IO_BASE         0xe5a00000
+#define PCMCIA1_IO_SIZE         0x00200000
+#define PCMCIA1_IO_START        0x38000000
+
+#define PRIME3C_BASE            0xf0050000
+#define PRIME3C_SIZE            0x00001000
+#define PRIME3C_START           0x10000000
+
+/* VGA Controller */
+#define VGA_RAMBASE 		0x50
+#define VGA_TIMING0 		0x60
+#define VGA_TIMING1 		0x64
+#define VGA_TIMING2 		0x68
+#define VGA_TIMING3 		0x6c
+
+#define LCD_CTRL_VGA_ENABLE   	0x00000100
+#define LCD_CTRL_VGA_BPP_MASK 	0x00000600
+#define LCD_CTRL_VGA_4BPP    	0x00000000
+#define LCD_CTRL_VGA_8BPP    	0x00000200
+#define LCD_CTRL_VGA_16BPP   	0x00000300
+#define LCD_CTRL_SHARE_DMA    	0x00000800
+#define LCD_CTRL_VDE          	0x00100000
+#define LCD_CTRL_LPE          	0x00400000	/* LCD Power enable */
+#define LCD_CTRL_BLE          	0x00800000	/* LCD backlight enable */
+
+#define VGA_PALETTE_BASE	(IO_VIRT + 0x10800)
diff --git a/arch/arm/mach-h720x/include/mach/h7202-regs.h b/arch/arm/mach-h720x/include/mach/h7202-regs.h
new file mode 100644
index 000000000000..17c12eb34995
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/h7202-regs.h
@@ -0,0 +1,155 @@
+/*
+ * arch/arm/mach-h720x/include/mach/h7202-regs.h
+ *
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *           (C) 2004 Sascha Hauer    <s.hauer@pengutronix.de>
+ *
+ * This file contains the hardware definitions of the h720x processors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not add implementations specific defines here. This files contains
+ * only defines of the onchip peripherals. Add those defines to boards.h,
+ * which is included by this file.
+ */
+
+#define SERIAL2_OFS		0x2d000
+#define SERIAL2_BASE		(IO_PHYS + SERIAL2_OFS)
+#define SERIAL2_VIRT 		(IO_VIRT + SERIAL2_OFS)
+#define SERIAL3_OFS		0x2e000
+#define SERIAL3_BASE		(IO_PHYS + SERIAL3_OFS)
+#define SERIAL3_VIRT 		(IO_VIRT + SERIAL3_OFS)
+
+/* Matrix Keyboard Controller */
+#define KBD_VIRT		(IO_VIRT + 0x22000)
+#define KBD_KBCR		0x00
+#define KBD_KBSC		0x04
+#define KBD_KBTR		0x08
+#define KBD_KBVR0		0x0C
+#define KBD_KBVR1		0x10
+#define KBD_KBSR		0x18
+
+#define KBD_KBCR_SCANENABLE	(1 << 7)
+#define KBD_KBCR_NPOWERDOWN	(1 << 2)
+#define KBD_KBCR_CLKSEL_MASK	(3)
+#define KBD_KBCR_CLKSEL_PCLK2	0x0
+#define KBD_KBCR_CLKSEL_PCLK128	0x1
+#define KBD_KBCR_CLKSEL_PCLK256	0x2
+#define KBD_KBCR_CLKSEL_PCLK512	0x3
+
+#define KBD_KBSR_INTR		(1 << 0)
+#define KBD_KBSR_WAKEUP		(1 << 1)
+
+/* USB device controller */
+
+#define USBD_BASE		(IO_VIRT + 0x12000)
+#define USBD_LENGTH		0x3C
+
+#define USBD_GCTRL		0x00
+#define USBD_EPCTRL		0x04
+#define USBD_INTMASK		0x08
+#define USBD_INTSTAT		0x0C
+#define USBD_PWR		0x10
+#define USBD_DMARXTX		0x14
+#define USBD_DEVID		0x18
+#define USBD_DEVCLASS		0x1C
+#define USBD_INTCLASS		0x20
+#define USBD_SETUP0		0x24
+#define USBD_SETUP1		0x28
+#define USBD_ENDP0RD		0x2C
+#define USBD_ENDP0WT		0x30
+#define USBD_ENDP1RD		0x34
+#define USBD_ENDP2WT		0x38
+
+/* PS/2 port */
+#define PSDATA 0x00
+#define PSSTAT 0x04
+#define PSSTAT_TXEMPTY (1<<0)
+#define PSSTAT_TXBUSY (1<<1)
+#define PSSTAT_RXFULL (1<<2)
+#define PSSTAT_RXBUSY (1<<3)
+#define PSSTAT_CLKIN (1<<4)
+#define PSSTAT_DATAIN (1<<5)
+#define PSSTAT_PARITY (1<<6)
+
+#define PSCONF 0x08
+#define PSCONF_ENABLE (1<<0)
+#define PSCONF_TXINTEN (1<<2)
+#define PSCONF_RXINTEN (1<<3)
+#define PSCONF_FORCECLKLOW (1<<4)
+#define PSCONF_FORCEDATLOW (1<<5)
+#define PSCONF_LCE (1<<6)
+
+#define PSINTR 0x0C
+#define PSINTR_TXINT (1<<0)
+#define PSINTR_RXINT (1<<1)
+#define PSINTR_PAR (1<<2)
+#define PSINTR_RXTO (1<<3)
+#define PSINTR_TXTO (1<<4)
+
+#define PSTDLO 0x10 /* clk low before start transmission */
+#define PSTPRI 0x14 /* PRI clock */
+#define PSTXMT 0x18 /* maximum transmission time */
+#define PSTREC 0x20 /* maximum receive time */
+#define PSPWDN 0x3c
+
+/* ADC converter */
+#define ADC_BASE 		(IO_VIRT + 0x29000)
+#define ADC_CR 			0x00
+#define ADC_TSCTRL 		0x04
+#define ADC_BT_CTRL 		0x08
+#define ADC_MC_CTRL		0x0C
+#define ADC_STATUS		0x10
+
+/* ADC control register bits */
+#define ADC_CR_PW_CTRL 		0x80
+#define ADC_CR_DIRECTC		0x04
+#define ADC_CR_CONTIME_NO	0x00
+#define ADC_CR_CONTIME_2	0x04
+#define ADC_CR_CONTIME_4	0x08
+#define ADC_CR_CONTIME_ADE	0x0c
+#define ADC_CR_LONGCALTIME	0x01
+
+/* ADC touch panel register bits */
+#define ADC_TSCTRL_ENABLE 	0x80
+#define ADC_TSCTRL_INTR   	0x40
+#define	ADC_TSCTRL_SWBYPSS	0x20
+#define ADC_TSCTRL_SWINVT	0x10
+#define ADC_TSCTRL_S400   	0x03
+#define ADC_TSCTRL_S200   	0x02
+#define ADC_TSCTRL_S100   	0x01
+#define ADC_TSCTRL_S50    	0x00
+
+/* ADC Interrupt Status Register bits */
+#define ADC_STATUS_TS_BIT	0x80
+#define ADC_STATUS_MBT_BIT	0x40
+#define ADC_STATUS_BBT_BIT	0x20
+#define ADC_STATUS_MIC_BIT	0x10
+
+/* Touch data registers */
+#define ADC_TS_X0X1  		0x30
+#define ADC_TS_X2X3		0x34
+#define ADC_TS_Y0Y1		0x38
+#define ADC_TS_Y2Y3  		0x3c
+#define ADC_TS_X4X5  		0x40
+#define ADC_TS_X6X7  		0x44
+#define ADC_TS_Y4Y5		0x48
+#define ADC_TS_Y6Y7		0x50
+
+/* battery data */
+#define ADC_MB_DATA		0x54
+#define ADC_BB_DATA		0x58
+
+/* Sound data register */
+#define ADC_SD_DAT0 		0x60
+#define ADC_SD_DAT1		0x64
+#define ADC_SD_DAT2		0x68
+#define ADC_SD_DAT3		0x6c
+#define ADC_SD_DAT4		0x70
+#define ADC_SD_DAT5		0x74
+#define ADC_SD_DAT6		0x78
+#define ADC_SD_DAT7		0x7c
diff --git a/arch/arm/mach-h720x/include/mach/hardware.h b/arch/arm/mach-h720x/include/mach/hardware.h
new file mode 100644
index 000000000000..6c19156e2a42
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/hardware.h
@@ -0,0 +1,192 @@
+/*
+ * arch/arm/mach-h720x/include/mach/hardware.h
+ *
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *
+ * This file contains the hardware definitions of the h720x processors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Do not add implementations specific defines here. This files contains
+ * only defines of the onchip peripherals. Add those defines to boards.h,
+ * which is included by this file.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#define IOCLK (3686400L)
+
+/* Onchip peripherals */
+
+#define IO_VIRT			0xf0000000	/* IO peripherals */
+#define IO_PHYS			0x80000000
+#define IO_SIZE			0x00050000
+
+#ifdef CONFIG_CPU_H7202
+#include "h7202-regs.h"
+#elif defined CONFIG_CPU_H7201
+#include "h7201-regs.h"
+#else
+#error machine definition mismatch
+#endif
+
+/* Macro to access the CPU IO */
+#define CPU_IO(x) (*(volatile u32*)(x))
+
+/* Macro to access general purpose regs (base, offset) */
+#define CPU_REG(x,y) CPU_IO(x+y)
+
+/* Macro to access irq related regs */
+#define IRQ_REG(x) CPU_REG(IRQC_VIRT,x)
+
+/* CPU registers */
+/* general purpose I/O */
+#define GPIO_VIRT(x)		(IO_VIRT + 0x23000 + ((x)<<5))
+#define GPIO_A_VIRT		(GPIO_VIRT(0))
+#define GPIO_B_VIRT		(GPIO_VIRT(1))
+#define GPIO_C_VIRT		(GPIO_VIRT(2))
+#define GPIO_D_VIRT		(GPIO_VIRT(3))
+#define GPIO_E_VIRT		(GPIO_VIRT(4))
+#define GPIO_AMULSEL		(GPIO_VIRT(0) + 0xA4)
+
+#define AMULSEL_USIN2	(1<<5)
+#define AMULSEL_USOUT2	(1<<6)
+#define AMULSEL_USIN3	(1<<13)
+#define AMULSEL_USOUT3	(1<<14)
+#define AMULSEL_IRDIN	(1<<15)
+#define AMULSEL_IRDOUT	(1<<7)
+
+/* Register offsets general purpose I/O */
+#define GPIO_DATA		0x00
+#define GPIO_DIR		0x04
+#define GPIO_MASK		0x08
+#define GPIO_STAT		0x0C
+#define GPIO_EDGE		0x10
+#define GPIO_CLR		0x14
+#define GPIO_POL		0x18
+#define GPIO_EN			0x1C
+
+/*interrupt controller */
+#define IRQC_VIRT		(IO_VIRT + 0x24000)
+/* register offset interrupt controller */
+#define IRQC_IER		0x00
+#define IRQC_ISR		0x04
+
+/* timer unit */
+#define TIMER_VIRT		(IO_VIRT + 0x25000)
+/* Register offsets timer unit */
+#define TM0_PERIOD   		0x00
+#define TM0_COUNT    		0x08
+#define TM0_CTRL     		0x10
+#define TM1_PERIOD   		0x20
+#define TM1_COUNT    		0x28
+#define TM1_CTRL     		0x30
+#define TM2_PERIOD   		0x40
+#define TM2_COUNT    		0x48
+#define TM2_CTRL     		0x50
+#define TIMER_TOPCTRL		0x60
+#define TIMER_TOPSTAT		0x64
+#define T64_COUNTL		0x80
+#define T64_COUNTH		0x84
+#define T64_CTRL		0x88
+#define T64_BASEL		0x94
+#define T64_BASEH		0x98
+/* Bitmaks timer unit TOPSTAT reg */
+#define TSTAT_T0INT		0x1
+#define TSTAT_T1INT		0x2
+#define TSTAT_T2INT		0x4
+#define TSTAT_T3INT		0x8
+/* Bit description of TMx_CTRL register */
+#define TM_START  		0x1
+#define TM_REPEAT 		0x2
+#define TM_RESET  		0x4
+/* Bit description of TIMER_CTRL register */
+#define ENABLE_TM0_INTR  	0x1
+#define ENABLE_TM1_INTR  	0x2
+#define ENABLE_TM2_INTR  	0x4
+#define TIMER_ENABLE_BIT 	0x8
+#define ENABLE_TIMER64   	0x10
+#define ENABLE_TIMER64_INT	0x20
+
+/* PMU & PLL */
+#define PMU_BASE 		(IO_VIRT + 0x1000)
+#define PMU_MODE		0x00
+#define PMU_STAT   		0x20
+#define PMU_PLL_CTRL 		0x28
+
+/* PMU Mode bits */
+#define PMU_MODE_SLOW		0x00
+#define PMU_MODE_RUN		0x01
+#define PMU_MODE_IDLE		0x02
+#define PMU_MODE_SLEEP		0x03
+#define PMU_MODE_INIT		0x04
+#define PMU_MODE_DEEPSLEEP	0x07
+#define PMU_MODE_WAKEUP		0x08
+
+/* PMU ... */
+#define PLL_2_EN		0x8000
+#define PLL_1_EN		0x4000
+#define PLL_3_MUTE		0x0080
+
+/* Control bits for PMU/ PLL */
+#define PMU_WARMRESET		0x00010000
+#define PLL_CTRL_MASK23		0x000080ff
+
+/* LCD Controller */
+#define LCD_BASE 		(IO_VIRT + 0x10000)
+#define LCD_CTRL 		0x00
+#define LCD_STATUS		0x04
+#define LCD_STATUS_M		0x08
+#define LCD_INTERRUPT		0x0C
+#define LCD_DBAR		0x10
+#define LCD_DCAR		0x14
+#define LCD_TIMING0 		0x20
+#define LCD_TIMING1 		0x24
+#define LCD_TIMING2 		0x28
+#define LCD_TEST		0x40
+
+/* LCD Control Bits */
+#define LCD_CTRL_LCD_ENABLE   	0x00000001
+/* Bits per pixel */
+#define LCD_CTRL_LCD_BPP_MASK 	0x00000006
+#define LCD_CTRL_LCD_4BPP    	0x00000000
+#define LCD_CTRL_LCD_8BPP    	0x00000002
+#define LCD_CTRL_LCD_16BPP   	0x00000004
+#define LCD_CTRL_LCD_BW		0x00000008
+#define LCD_CTRL_LCD_TFT	0x00000010
+#define LCD_CTRL_BGR		0x00001000
+#define LCD_CTRL_LCD_VCOMP	0x00080000
+#define LCD_CTRL_LCD_MONO8	0x00200000
+#define LCD_CTRL_LCD_PWR	0x00400000
+#define LCD_CTRL_LCD_BLE	0x00800000
+#define LCD_CTRL_LDBUSEN	0x01000000
+
+/* Palette */
+#define LCD_PALETTE_BASE 	(IO_VIRT + 0x10400)
+
+/* Serial ports */
+#define SERIAL0_OFS		0x20000
+#define SERIAL0_VIRT 		(IO_VIRT + SERIAL0_OFS)
+#define SERIAL0_BASE		(IO_PHYS + SERIAL0_OFS)
+
+#define SERIAL1_OFS		0x21000
+#define SERIAL1_VIRT 		(IO_VIRT + SERIAL1_OFS)
+#define SERIAL1_BASE		(IO_PHYS + SERIAL1_OFS)
+
+#define SERIAL_ENABLE		0x30
+#define SERIAL_ENABLE_EN	(1<<0)
+
+/* General defines to pacify gcc */
+#define PCIO_BASE 		(0)	/* for inb, outb and friends */
+#define PCIO_VIRT		PCIO_BASE
+
+#define __ASM_ARCH_HARDWARE_INCMACH_H
+#include "boards.h"
+#undef __ASM_ARCH_HARDWARE_INCMACH_H
+
+#endif				/* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-h720x/include/mach/io.h b/arch/arm/mach-h720x/include/mach/io.h
new file mode 100644
index 000000000000..1dab74ce88c6
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/io.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-h720x/include/mach/io.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *
+ *  09-19-2001	JJKIM
+ *  		Created from arch/arm/mach-l7200/include/mach/io.h
+ *
+ *  03-27-2003  Robert Schwebel <r.schwebel@pengutronix.de>:
+ *  		re-unified header files for h720x
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		((void __iomem *)(a))
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/irqs.h b/arch/arm/mach-h720x/include/mach/irqs.h
new file mode 100644
index 000000000000..430a92b492f1
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/irqs.h
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/mach-h720x/include/mach/irqs.h
+ *
+ * Copyright (C) 2000 Jungjun Kim
+ *           (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>
+ *           (C) 2003 Thomas Gleixner <tglx@linutronix.de>
+ *
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#if defined (CONFIG_CPU_H7201)
+
+#define IRQ_PMU		0		/* 0x000001 */
+#define IRQ_DMA		1 		/* 0x000002 */
+#define IRQ_LCD		2		/* 0x000004 */
+#define IRQ_VGA		3 		/* 0x000008 */
+#define IRQ_PCMCIA1 	4 		/* 0x000010 */
+#define IRQ_PCMCIA2 	5 		/* 0x000020 */
+#define IRQ_AFE		6 		/* 0x000040 */
+#define IRQ_AIC		7 		/* 0x000080 */
+#define IRQ_KEYBOARD 	8 		/* 0x000100 */
+#define IRQ_TIMER0	9 		/* 0x000200 */
+#define IRQ_RTC		10		/* 0x000400 */
+#define IRQ_SOUND	11		/* 0x000800 */
+#define IRQ_USB		12		/* 0x001000 */
+#define IRQ_IrDA 	13		/* 0x002000 */
+#define IRQ_UART0	14		/* 0x004000 */
+#define IRQ_UART1	15		/* 0x008000 */
+#define IRQ_SPI		16		/* 0x010000 */
+#define IRQ_GPIOA 	17		/* 0x020000 */
+#define IRQ_GPIOB	18		/* 0x040000 */
+#define IRQ_GPIOC	19		/* 0x080000 */
+#define IRQ_GPIOD	20		/* 0x100000 */
+#define IRQ_CommRX	21		/* 0x200000 */
+#define IRQ_CommTX	22		/* 0x400000 */
+#define IRQ_Soft	23		/* 0x800000 */
+
+#define NR_GLBL_IRQS	24
+
+#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
+#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
+#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
+#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
+#define NR_IRQS               IRQ_CHAINED_GPIOD(32)
+
+/* Enable mask for multiplexed interrupts */
+#define IRQ_ENA_MUX	(1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) \
+			| (1<<IRQ_GPIOC) | (1<<IRQ_GPIOD)
+
+
+#elif defined (CONFIG_CPU_H7202)
+
+#define IRQ_PMU		0		/* 0x00000001 */
+#define IRQ_DMA		1		/* 0x00000002 */
+#define IRQ_LCD		2		/* 0x00000004 */
+#define IRQ_SOUND	3		/* 0x00000008 */
+#define IRQ_I2S		4		/* 0x00000010 */
+#define IRQ_USB 	5		/* 0x00000020 */
+#define IRQ_MMC 	6		/* 0x00000040 */
+#define IRQ_RTC 	7		/* 0x00000080 */
+#define IRQ_UART0 	8		/* 0x00000100 */
+#define IRQ_UART1 	9		/* 0x00000200 */
+#define IRQ_UART2 	10		/* 0x00000400 */
+#define IRQ_UART3 	11		/* 0x00000800 */
+#define IRQ_KBD 	12		/* 0x00001000 */
+#define IRQ_PS2 	13		/* 0x00002000 */
+#define IRQ_AIC 	14		/* 0x00004000 */
+#define IRQ_TIMER0 	15		/* 0x00008000 */
+#define IRQ_TIMERX 	16		/* 0x00010000 */
+#define IRQ_WDT 	17		/* 0x00020000 */
+#define IRQ_CAN0 	18		/* 0x00040000 */
+#define IRQ_CAN1 	19		/* 0x00080000 */
+#define IRQ_EXT0 	20		/* 0x00100000 */
+#define IRQ_EXT1 	21		/* 0x00200000 */
+#define IRQ_GPIOA 	22		/* 0x00400000 */
+#define IRQ_GPIOB 	23		/* 0x00800000 */
+#define IRQ_GPIOC 	24		/* 0x01000000 */
+#define IRQ_GPIOD 	25		/* 0x02000000 */
+#define IRQ_GPIOE 	26		/* 0x04000000 */
+#define IRQ_COMMRX 	27		/* 0x08000000 */
+#define IRQ_COMMTX 	28		/* 0x10000000 */
+#define IRQ_SMC 	29		/* 0x20000000 */
+#define IRQ_Soft 	30		/* 0x40000000 */
+#define IRQ_RESERVED1 	31		/* 0x80000000 */
+#define NR_GLBL_IRQS	32
+
+#define NR_TIMERX_IRQS	3
+
+#define IRQ_CHAINED_GPIOA(x)  (NR_GLBL_IRQS + x)
+#define IRQ_CHAINED_GPIOB(x)  (IRQ_CHAINED_GPIOA(32) + x)
+#define IRQ_CHAINED_GPIOC(x)  (IRQ_CHAINED_GPIOB(32) + x)
+#define IRQ_CHAINED_GPIOD(x)  (IRQ_CHAINED_GPIOC(32) + x)
+#define IRQ_CHAINED_GPIOE(x)  (IRQ_CHAINED_GPIOD(32) + x)
+#define IRQ_CHAINED_TIMERX(x) (IRQ_CHAINED_GPIOE(32) + x)
+#define IRQ_TIMER1            (IRQ_CHAINED_TIMERX(0))
+#define IRQ_TIMER2            (IRQ_CHAINED_TIMERX(1))
+#define IRQ_TIMER64B          (IRQ_CHAINED_TIMERX(2))
+
+#define NR_IRQS		(IRQ_CHAINED_TIMERX(NR_TIMERX_IRQS))
+
+/* Enable mask for multiplexed interrupts */
+#define IRQ_ENA_MUX	(1<<IRQ_TIMERX) | (1<<IRQ_GPIOA) | (1<<IRQ_GPIOB) | \
+			(1<<IRQ_GPIOC) 	| (1<<IRQ_GPIOD) | (1<<IRQ_GPIOE) | \
+			(1<<IRQ_TIMERX)
+
+#else
+#error cpu definition mismatch
+#endif
+
+/* decode irq number to register number */
+#define IRQ_TO_REGNO(irq) ((irq - NR_GLBL_IRQS) >> 5)
+#define IRQ_TO_BIT(irq) (1 << ((irq - NR_GLBL_IRQS) % 32))
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h
new file mode 100644
index 000000000000..cb26f49cc4e1
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/memory.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-h720x/include/mach/memory.h
+ *
+ * Copyright (c) 2000 Jungjun Kim
+ *
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Page offset:
+ *    ( 0xc0000000UL )
+ */
+#define PHYS_OFFSET	UL(0x40000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ *
+ * There is something to do here later !, Mar 2000, Jungjun Kim
+ */
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h
new file mode 100644
index 000000000000..e4a7c760d52a
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/system.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-h720x/include/mach/system.h
+ *
+ * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ * arch/arm/mach-h720x/include/mach/system.h
+ *
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+#include <mach/hardware.h>
+
+static void arch_idle(void)
+{
+	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
+	nop();
+	nop();
+	CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
+	nop();
+	nop();
+}
+
+
+static __inline__ void arch_reset(char mode)
+{
+	CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
+}
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/timex.h b/arch/arm/mach-h720x/include/mach/timex.h
new file mode 100644
index 000000000000..3f2f447ff36b
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/timex.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-h720x/include/mach/timex.h
+ * Copyright (C) 2000 Jungjun Kim, Hynix Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX
+#define __ASM_ARCH_TIMEX
+
+#define CLOCK_TICK_RATE		3686400
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/uncompress.h b/arch/arm/mach-h720x/include/mach/uncompress.h
new file mode 100644
index 000000000000..d6623234f61e
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-h720x/include/mach/uncompress.h
+ *
+ * Copyright (C) 2001-2002 Jungjun Kim
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/hardware.h>
+
+#define LSR 	0x14
+#define TEMPTY 	0x40
+
+static inline void putc(int c)
+{
+	volatile unsigned char *p = (volatile unsigned char *)(IO_PHYS+0x20000);
+
+	/* wait until transmit buffer is empty */
+	while((p[LSR] & TEMPTY) == 0x0)
+		barrier();
+
+	/* write next character */
+	*p = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-h720x/include/mach/vmalloc.h b/arch/arm/mach-h720x/include/mach/vmalloc.h
new file mode 100644
index 000000000000..ff1460d6841b
--- /dev/null
+++ b/arch/arm/mach-h720x/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-h720x/include/mach/vmalloc.h
+ */
+
+#ifndef __ARCH_ARM_VMALLOC_H
+#define __ARCH_ARM_VMALLOC_H
+
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
+
+#endif
diff --git a/arch/arm/mach-imx/clock.c b/arch/arm/mach-imx/clock.c
index 6a90fe5578df..4b4230db3765 100644
--- a/arch/arm/mach-imx/clock.c
+++ b/arch/arm/mach-imx/clock.c
@@ -23,7 +23,7 @@
 #include <linux/err.h>
 
 #include <asm/io.h>
-#include <asm/arch/imx-regs.h>
+#include <mach/imx-regs.h>
 
 /*
  * Very simple approach: We can't disable clocks, so we do
@@ -172,24 +172,29 @@ found:
 
 	return clk;
 }
+EXPORT_SYMBOL(clk_get);
 
 void clk_put(struct clk *clk)
 {
 }
+EXPORT_SYMBOL(clk_put);
 
 int clk_enable(struct clk *clk)
 {
 	return 0;
 }
+EXPORT_SYMBOL(clk_enable);
 
 void clk_disable(struct clk *clk)
 {
 }
+EXPORT_SYMBOL(clk_disable);
 
 unsigned long clk_get_rate(struct clk *clk)
 {
 	return clk->get_rate();
 }
+EXPORT_SYMBOL(clk_get_rate);
 
 int imx_clocks_init(void)
 {
diff --git a/arch/arm/mach-imx/cpufreq.c b/arch/arm/mach-imx/cpufreq.c
index be0809b33e08..434b4ca0af67 100644
--- a/arch/arm/mach-imx/cpufreq.c
+++ b/arch/arm/mach-imx/cpufreq.c
@@ -36,7 +36,7 @@
 #include <linux/err.h>
 #include <asm/system.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-imx/dma.c b/arch/arm/mach-imx/dma.c
index ee1c6f06ff64..c10810c936b3 100644
--- a/arch/arm/mach-imx/dma.c
+++ b/arch/arm/mach-imx/dma.c
@@ -30,9 +30,9 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
-#include <asm/arch/imx-dma.h>
+#include <mach/imx-dma.h>
 
 struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
 
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index 98ddd8a6d05f..fa72174dd95c 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -29,13 +29,13 @@
 #include <linux/string.h>
 
 #include <asm/errno.h>
-#include <asm/arch/imxfb.h>
-#include <asm/hardware.h>
-#include <asm/arch/imx-regs.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/imx-regs.h>
 
 #include <asm/mach/map.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG];
 
@@ -251,7 +251,6 @@ void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info)
 {
 	memcpy(&imx_fb_info,hard_imx_fb_info,sizeof(struct imxfb_mach_info));
 }
-EXPORT_SYMBOL(set_imx_fb_info);
 
 static struct resource imxfb_resources[] = {
 	[0] = {
diff --git a/arch/arm/mach-imx/include/mach/debug-macro.S b/arch/arm/mach-imx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..87802bbfe633
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/debug-macro.S
@@ -0,0 +1,34 @@
+/* arch/arm/mach-imx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x00000000	@ physical
+		movne	\rx, #0xe0000000	@ virtual
+		orreq	\rx, \rx, #0x00200000	@ physical
+		orr	\rx, \rx, #0x00006000	@ UART1 offset
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x40]	@ TXDATA
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x98]	@ SR2
+		tst	\rd, #1 << 3		@ TXDC
+		beq	1002b			@ wait until transmit done
+		.endm
diff --git a/arch/arm/mach-imx/include/mach/dma.h b/arch/arm/mach-imx/include/mach/dma.h
new file mode 100644
index 000000000000..621ff2c730f2
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/dma.h
@@ -0,0 +1,56 @@
+/*
+ *  linux/include/asm-arm/imxads/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+} imx_dma_prio;
+
+#define DMA_REQ_UART3_T        2
+#define DMA_REQ_UART3_R        3
+#define DMA_REQ_SSI2_T         4
+#define DMA_REQ_SSI2_R         5
+#define DMA_REQ_CSI_STAT       6
+#define DMA_REQ_CSI_R          7
+#define DMA_REQ_MSHC           8
+#define DMA_REQ_DSPA_DCT_DOUT  9
+#define DMA_REQ_DSPA_DCT_DIN  10
+#define DMA_REQ_DSPA_MAC      11
+#define DMA_REQ_EXT           12
+#define DMA_REQ_SDHC          13
+#define DMA_REQ_SPI1_R        14
+#define DMA_REQ_SPI1_T        15
+#define DMA_REQ_SSI_T         16
+#define DMA_REQ_SSI_R         17
+#define DMA_REQ_ASP_DAC       18
+#define DMA_REQ_ASP_ADC       19
+#define DMA_REQ_USP_EP(x)    (20+(x))
+#define DMA_REQ_SPI2_R        26
+#define DMA_REQ_SPI2_T        27
+#define DMA_REQ_UART2_T       28
+#define DMA_REQ_UART2_R       29
+#define DMA_REQ_UART1_T       30
+#define DMA_REQ_UART1_R       31
+
+#endif				/* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/entry-macro.S b/arch/arm/mach-imx/include/mach/entry-macro.S
new file mode 100644
index 000000000000..e4db679f7766
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/entry-macro.S
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-imx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for iMX-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro	get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro	arch_ret_to_user, tmp1, tmp2
+		.endm
+
+#define AITC_NIVECSR   0x40
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =IO_ADDRESS(IMX_AITC_BASE)
+		@ Load offset & priority of the highest priority
+		@ interrupt pending.
+		ldr	\irqstat, [\base, #AITC_NIVECSR]
+		@ Shift off the priority leaving the offset or
+		@ "interrupt number", use arithmetic shift to
+		@ transform illegal source (0xffff) as -1
+		mov	\irqnr, \irqstat, asr #16
+		adds	\tmp, \irqnr, #1
+		.endm
diff --git a/arch/arm/mach-imx/include/mach/gpio.h b/arch/arm/mach-imx/include/mach/gpio.h
new file mode 100644
index 000000000000..6e3d795f2264
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/gpio.h
@@ -0,0 +1,102 @@
+#ifndef _IMX_GPIO_H
+
+#include <mach/imx-regs.h>
+
+#define IMX_GPIO_ALLOC_MODE_NORMAL	0
+#define IMX_GPIO_ALLOC_MODE_NO_ALLOC	1
+#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC	2
+#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY	4
+#define IMX_GPIO_ALLOC_MODE_RELEASE	8
+
+extern int imx_gpio_request(unsigned gpio, const char *label);
+
+extern void imx_gpio_free(unsigned gpio);
+
+extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+					int alloc_mode, const char *label);
+
+extern int imx_gpio_direction_input(unsigned gpio);
+
+extern int imx_gpio_direction_output(unsigned gpio, int value);
+
+extern void __imx_gpio_set_value(unsigned gpio, int value);
+
+static inline int imx_gpio_get_value(unsigned gpio)
+{
+	return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
+}
+
+static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
+{
+	unsigned long flags;
+
+	raw_local_irq_save(flags);
+	if(value)
+		DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
+	else
+		DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
+	raw_local_irq_restore(flags);
+}
+
+static inline void imx_gpio_set_value(unsigned gpio, int value)
+{
+	if(__builtin_constant_p(gpio))
+		imx_gpio_set_value_inline(gpio, value);
+	else
+		__imx_gpio_set_value(gpio, value);
+}
+
+extern int imx_gpio_to_irq(unsigned gpio);
+
+extern int imx_irq_to_gpio(unsigned irq);
+
+/*-------------------------------------------------------------------------*/
+
+/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
+ * to allow future extension of GPIO logic.
+ */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return imx_gpio_request(gpio, label);
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	imx_gpio_free(gpio);
+}
+
+static inline  int gpio_direction_input(unsigned gpio)
+{
+	return imx_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+	return imx_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return imx_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	imx_gpio_set_value(gpio, value);
+}
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return imx_gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return imx_irq_to_gpio(irq);
+}
+
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/hardware.h b/arch/arm/mach-imx/include/mach/hardware.h
new file mode 100644
index 000000000000..c73e9e724c75
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/hardware.h
@@ -0,0 +1,91 @@
+/*
+ *  arch/arm/mach-imx/include/mach/hardware.h
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include "imx-regs.h"
+
+#ifndef __ASSEMBLY__
+# define __REG(x)	(*((volatile u32 *)IO_ADDRESS(x)))
+
+# define __REG2(x,y)        (*(volatile u32 *)((u32)&__REG(x) + (y)))
+#endif
+
+/*
+ * Memory map
+ */
+
+#define IMX_IO_PHYS		0x00200000
+#define IMX_IO_SIZE		0x00100000
+#define IMX_IO_BASE		0xe0000000
+
+#define IMX_CS0_PHYS		0x10000000
+#define IMX_CS0_SIZE		0x02000000
+#define IMX_CS0_VIRT		0xe8000000
+
+#define IMX_CS1_PHYS		0x12000000
+#define IMX_CS1_SIZE		0x01000000
+#define IMX_CS1_VIRT		0xea000000
+
+#define IMX_CS2_PHYS		0x13000000
+#define IMX_CS2_SIZE		0x01000000
+#define IMX_CS2_VIRT		0xeb000000
+
+#define IMX_CS3_PHYS		0x14000000
+#define IMX_CS3_SIZE		0x01000000
+#define IMX_CS3_VIRT		0xec000000
+
+#define IMX_CS4_PHYS		0x15000000
+#define IMX_CS4_SIZE		0x01000000
+#define IMX_CS4_VIRT		0xed000000
+
+#define IMX_CS5_PHYS		0x16000000
+#define IMX_CS5_SIZE		0x01000000
+#define IMX_CS5_VIRT		0xee000000
+
+#define IMX_FB_VIRT		0xF1000000
+#define IMX_FB_SIZE		(256*1024)
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
+
+#ifndef __ASSEMBLY__
+/*
+ * Handy routine to set GPIO functions
+ */
+extern void imx_gpio_mode( int gpio_mode );
+
+#endif
+
+#define MAXIRQNUM                       62
+#define MAXFIQNUM                       62
+#define MAXSWINUM                       62
+
+/*
+ * Use SDRAM for memory
+ */
+#define MEM_SIZE		0x01000000
+
+#ifdef CONFIG_ARCH_MX1ADS
+#include "mx1ads.h"
+#endif
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/imx-dma.h b/arch/arm/mach-imx/include/mach/imx-dma.h
new file mode 100644
index 000000000000..44d89c35539a
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/imx-dma.h
@@ -0,0 +1,94 @@
+/*
+ *  linux/include/asm-arm/imxads/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <asm/dma.h>
+
+#ifndef __ASM_ARCH_IMX_DMA_H
+#define __ASM_ARCH_IMX_DMA_H
+
+#define IMX_DMA_CHANNELS  11
+
+/*
+ * struct imx_dma_channel - i.MX specific DMA extension
+ * @name: name specified by DMA client
+ * @irq_handler: client callback for end of transfer
+ * @err_handler: client callback for error condition
+ * @data: clients context data for callbacks
+ * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
+ * @sg: pointer to the actual read/written chunk for scatter-gather emulation
+ * @sgbc: counter of processed bytes in the actual read/written chunk
+ * @resbytes: total residual number of bytes to transfer
+ *            (it can be lower or same as sum of SG mapped chunk sizes)
+ * @sgcount: number of chunks to be read/written
+ *
+ * Structure is used for IMX DMA processing. It would be probably good
+ * @struct dma_struct in the future for external interfacing and use
+ * @struct imx_dma_channel only as extension to it.
+ */
+
+struct imx_dma_channel {
+	const char *name;
+	void (*irq_handler) (int, void *);
+	void (*err_handler) (int, void *, int errcode);
+	void *data;
+	dmamode_t  dma_mode;
+	struct scatterlist *sg;
+	unsigned int sgbc;
+	unsigned int sgcount;
+	unsigned int resbytes;
+	int dma_num;
+};
+
+extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
+
+#define IMX_DMA_ERR_BURST     1
+#define IMX_DMA_ERR_REQUEST   2
+#define IMX_DMA_ERR_TRANSFER  4
+#define IMX_DMA_ERR_BUFFER    8
+
+/* The type to distinguish channel numbers parameter from ordinal int type */
+typedef int imx_dmach_t;
+
+int
+imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
+		unsigned int dma_length, unsigned int dev_addr, dmamode_t dmamode);
+
+int
+imx_dma_setup_sg(imx_dmach_t dma_ch,
+		 struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
+		 unsigned int dev_addr, dmamode_t dmamode);
+
+int
+imx_dma_setup_handlers(imx_dmach_t dma_ch,
+		void (*irq_handler) (int, void *),
+		void (*err_handler) (int, void *, int), void *data);
+
+void imx_dma_enable(imx_dmach_t dma_ch);
+
+void imx_dma_disable(imx_dmach_t dma_ch);
+
+int imx_dma_request(imx_dmach_t dma_ch, const char *name);
+
+void imx_dma_free(imx_dmach_t dma_ch);
+
+imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio);
+
+
+#endif	/* _ASM_ARCH_IMX_DMA_H */
diff --git a/arch/arm/mach-imx/include/mach/imx-regs.h b/arch/arm/mach-imx/include/mach/imx-regs.h
new file mode 100644
index 000000000000..fb9de2733879
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/imx-regs.h
@@ -0,0 +1,482 @@
+#ifndef _IMX_REGS_H
+#define _IMX_REGS_H
+/* ------------------------------------------------------------------------
+ *  Motorola IMX system registers
+ * ------------------------------------------------------------------------
+ *
+ */
+
+/*
+ *  Register BASEs, based on OFFSETs
+ *
+ */
+#define IMX_AIPI1_BASE             (0x00000 + IMX_IO_BASE)
+#define IMX_WDT_BASE               (0x01000 + IMX_IO_BASE)
+#define IMX_TIM1_BASE              (0x02000 + IMX_IO_BASE)
+#define IMX_TIM2_BASE              (0x03000 + IMX_IO_BASE)
+#define IMX_RTC_BASE               (0x04000 + IMX_IO_BASE)
+#define IMX_LCDC_BASE              (0x05000 + IMX_IO_BASE)
+#define IMX_UART1_BASE             (0x06000 + IMX_IO_BASE)
+#define IMX_UART2_BASE             (0x07000 + IMX_IO_BASE)
+#define IMX_PWM_BASE               (0x08000 + IMX_IO_BASE)
+#define IMX_DMAC_BASE              (0x09000 + IMX_IO_BASE)
+#define IMX_AIPI2_BASE             (0x10000 + IMX_IO_BASE)
+#define IMX_SIM_BASE               (0x11000 + IMX_IO_BASE)
+#define IMX_USBD_BASE              (0x12000 + IMX_IO_BASE)
+#define IMX_SPI1_BASE              (0x13000 + IMX_IO_BASE)
+#define IMX_MMC_BASE               (0x14000 + IMX_IO_BASE)
+#define IMX_ASP_BASE               (0x15000 + IMX_IO_BASE)
+#define IMX_BTA_BASE               (0x16000 + IMX_IO_BASE)
+#define IMX_I2C_BASE               (0x17000 + IMX_IO_BASE)
+#define IMX_SSI_BASE               (0x18000 + IMX_IO_BASE)
+#define IMX_SPI2_BASE              (0x19000 + IMX_IO_BASE)
+#define IMX_MSHC_BASE              (0x1A000 + IMX_IO_BASE)
+#define IMX_PLL_BASE               (0x1B000 + IMX_IO_BASE)
+#define IMX_GPIO_BASE              (0x1C000 + IMX_IO_BASE)
+#define IMX_EIM_BASE               (0x20000 + IMX_IO_BASE)
+#define IMX_SDRAMC_BASE            (0x21000 + IMX_IO_BASE)
+#define IMX_MMA_BASE               (0x22000 + IMX_IO_BASE)
+#define IMX_AITC_BASE              (0x23000 + IMX_IO_BASE)
+#define IMX_CSI_BASE               (0x24000 + IMX_IO_BASE)
+
+/* PLL registers */
+#define CSCR   __REG(IMX_PLL_BASE)        /* Clock Source Control Register */
+#define CSCR_SPLL_RESTART	(1<<22)
+#define CSCR_MPLL_RESTART	(1<<21)
+#define CSCR_SYSTEM_SEL		(1<<16)
+#define CSCR_BCLK_DIV		(0xf<<10)
+#define CSCR_MPU_PRESC		(1<<15)
+#define CSCR_SPEN		(1<<1)
+#define CSCR_MPEN		(1<<0)
+
+#define MPCTL0 __REG(IMX_PLL_BASE + 0x4)  /* MCU PLL Control Register 0 */
+#define MPCTL1 __REG(IMX_PLL_BASE + 0x8)  /* MCU PLL and System Clock Register 1 */
+#define SPCTL0 __REG(IMX_PLL_BASE + 0xc)  /* System PLL Control Register 0 */
+#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
+#define PCDR   __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
+
+/*
+ *  GPIO Module and I/O Multiplexer
+ *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
+ */
+#define DDIR(x)    __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
+#define OCR1(x)    __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
+#define OCR2(x)    __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
+#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
+#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
+#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
+#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
+#define DR(x)      __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
+#define GIUS(x)    __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
+#define SSR(x)     __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
+#define ICR1(x)    __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
+#define ICR2(x)    __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
+#define IMR(x)     __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
+#define ISR(x)     __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
+#define GPR(x)     __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
+#define SWR(x)     __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
+#define PUEN(x)    __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
+
+#define GPIO_PORT_MAX  3
+
+#define GPIO_PIN_MASK 0x1f
+#define GPIO_PORT_MASK (0x3 << 5)
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORTA (0<<5)
+#define GPIO_PORTB (1<<5)
+#define GPIO_PORTC (2<<5)
+#define GPIO_PORTD (3<<5)
+
+#define GPIO_OUT   (1<<7)
+#define GPIO_IN    (0<<7)
+#define GPIO_PUEN  (1<<8)
+
+#define GPIO_PF    (0<<9)
+#define GPIO_AF    (1<<9)
+
+#define GPIO_OCR_SHIFT 10
+#define GPIO_OCR_MASK (3<<10)
+#define GPIO_AIN   (0<<10)
+#define GPIO_BIN   (1<<10)
+#define GPIO_CIN   (2<<10)
+#define GPIO_DR    (3<<10)
+
+#define GPIO_AOUT_SHIFT 12
+#define GPIO_AOUT_MASK (3<<12)
+#define GPIO_AOUT     (0<<12)
+#define GPIO_AOUT_ISR (1<<12)
+#define GPIO_AOUT_0   (2<<12)
+#define GPIO_AOUT_1   (3<<12)
+
+#define GPIO_BOUT_SHIFT 14
+#define GPIO_BOUT_MASK (3<<14)
+#define GPIO_BOUT      (0<<14)
+#define GPIO_BOUT_ISR  (1<<14)
+#define GPIO_BOUT_0    (2<<14)
+#define GPIO_BOUT_1    (3<<14)
+
+#define GPIO_GIUS      (1<<16)
+
+/* assignements for GPIO alternate/primary functions */
+
+/* FIXME: This list is not completed. The correct directions are
+ * missing on some (many) pins
+ */
+#define PA0_AIN_SPI2_CLK     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 )
+#define PA0_AF_ETMTRACESYNC  ( GPIO_PORTA | GPIO_AF | 0 )
+#define PA1_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 )
+#define PA1_PF_TIN           ( GPIO_PORTA | GPIO_PF | 1 )
+#define PA2_PF_PWM0          ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
+#define PA3_PF_CSI_MCLK      ( GPIO_PORTA | GPIO_PF | 3 )
+#define PA4_PF_CSI_D0        ( GPIO_PORTA | GPIO_PF | 4 )
+#define PA5_PF_CSI_D1        ( GPIO_PORTA | GPIO_PF | 5 )
+#define PA6_PF_CSI_D2        ( GPIO_PORTA | GPIO_PF | 6 )
+#define PA7_PF_CSI_D3        ( GPIO_PORTA | GPIO_PF | 7 )
+#define PA8_PF_CSI_D4        ( GPIO_PORTA | GPIO_PF | 8 )
+#define PA9_PF_CSI_D5        ( GPIO_PORTA | GPIO_PF | 9 )
+#define PA10_PF_CSI_D6       ( GPIO_PORTA | GPIO_PF | 10 )
+#define PA11_PF_CSI_D7       ( GPIO_PORTA | GPIO_PF | 11 )
+#define PA12_PF_CSI_VSYNC    ( GPIO_PORTA | GPIO_PF | 12 )
+#define PA13_PF_CSI_HSYNC    ( GPIO_PORTA | GPIO_PF | 13 )
+#define PA14_PF_CSI_PIXCLK   ( GPIO_PORTA | GPIO_PF | 14 )
+#define PA15_PF_I2C_SDA      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
+#define PA16_PF_I2C_SCL      ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
+#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
+#define PA17_AIN_SPI2_SS     ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 )
+#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
+#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
+#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
+#define PA21_PF_A0           ( GPIO_PORTA | GPIO_PF | 21 )
+#define PA22_PF_CS4          ( GPIO_PORTA | GPIO_PF | 22 )
+#define PA23_PF_CS5          ( GPIO_PORTA | GPIO_PF | 23 )
+#define PA24_PF_A16          ( GPIO_PORTA | GPIO_PF | 24 )
+#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
+#define PA25_PF_A17          ( GPIO_PORTA | GPIO_PF | 25 )
+#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
+#define PA26_PF_A18          ( GPIO_PORTA | GPIO_PF | 26 )
+#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
+#define PA27_PF_A19          ( GPIO_PORTA | GPIO_PF | 27 )
+#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
+#define PA28_PF_A20          ( GPIO_PORTA | GPIO_PF | 28 )
+#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
+#define PA29_PF_A21          ( GPIO_PORTA | GPIO_PF | 29 )
+#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
+#define PA30_PF_A22          ( GPIO_PORTA | GPIO_PF | 30 )
+#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
+#define PA31_PF_A23          ( GPIO_PORTA | GPIO_PF | 31 )
+#define PA31_AF_ETMTRACECLK  ( GPIO_PORTA | GPIO_AF | 31 )
+#define PB8_PF_SD_DAT0       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
+#define PB8_AF_MS_PIO        ( GPIO_PORTB | GPIO_AF | 8 )
+#define PB9_PF_SD_DAT1       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 9 )
+#define PB9_AF_MS_PI1        ( GPIO_PORTB | GPIO_AF | 9 )
+#define PB10_PF_SD_DAT2      ( GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 10 )
+#define PB10_AF_MS_SCLKI     ( GPIO_PORTB | GPIO_AF | 10 )
+#define PB11_PF_SD_DAT3      ( GPIO_PORTB | GPIO_PF | 11 )
+#define PB11_AF_MS_SDIO      ( GPIO_PORTB | GPIO_AF | 11 )
+#define PB12_PF_SD_CLK       ( GPIO_PORTB | GPIO_PF | 12 )
+#define PB12_AF_MS_SCLK0     ( GPIO_PORTB | GPIO_AF | 12 )
+#define PB13_PF_SD_CMD       ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
+#define PB13_AF_MS_BS        ( GPIO_PORTB | GPIO_AF | 13 )
+#define PB14_AF_SSI_RXFS     ( GPIO_PORTB | GPIO_AF | 14 )
+#define PB15_AF_SSI_RXCLK    ( GPIO_PORTB | GPIO_AF | 15 )
+#define PB16_AF_SSI_RXDAT    ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
+#define PB17_AF_SSI_TXDAT    ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
+#define PB18_AF_SSI_TXFS     ( GPIO_PORTB | GPIO_AF | 18 )
+#define PB19_AF_SSI_TXCLK    ( GPIO_PORTB | GPIO_AF | 19 )
+#define PB20_PF_USBD_AFE     ( GPIO_PORTB | GPIO_PF | 20 )
+#define PB21_PF_USBD_OE      ( GPIO_PORTB | GPIO_PF | 21 )
+#define PB22_PFUSBD_RCV      ( GPIO_PORTB | GPIO_PF | 22 )
+#define PB23_PF_USBD_SUSPND  ( GPIO_PORTB | GPIO_PF | 23 )
+#define PB24_PF_USBD_VP      ( GPIO_PORTB | GPIO_PF | 24 )
+#define PB25_PF_USBD_VM      ( GPIO_PORTB | GPIO_PF | 25 )
+#define PB26_PF_USBD_VPO     ( GPIO_PORTB | GPIO_PF | 26 )
+#define PB27_PF_USBD_VMO     ( GPIO_PORTB | GPIO_PF | 27 )
+#define PB28_PF_UART2_CTS    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
+#define PB29_PF_UART2_RTS    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
+#define PB30_PF_UART2_TXD    ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
+#define PB31_PF_UART2_RXD    ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
+#define PC3_PF_SSI_RXFS      ( GPIO_PORTC | GPIO_PF | 3 )
+#define PC4_PF_SSI_RXCLK     ( GPIO_PORTC | GPIO_PF | 4 )
+#define PC5_PF_SSI_RXDAT     ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
+#define PC6_PF_SSI_TXDAT     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
+#define PC7_PF_SSI_TXFS      ( GPIO_PORTC | GPIO_PF | 7 )
+#define PC8_PF_SSI_TXCLK     ( GPIO_PORTC | GPIO_PF | 8 )
+#define PC9_PF_UART1_CTS     ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
+#define PC10_PF_UART1_RTS    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
+#define PC11_PF_UART1_TXD    ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
+#define PC12_PF_UART1_RXD    ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
+#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
+#define PC14_PF_SPI1_SCLK    ( GPIO_PORTC | GPIO_PF | 14 )
+#define PC15_PF_SPI1_SS      ( GPIO_PORTC | GPIO_PF | 15 )
+#define PC16_PF_SPI1_MISO    ( GPIO_PORTC | GPIO_PF | 16 )
+#define PC17_PF_SPI1_MOSI    ( GPIO_PORTC | GPIO_PF | 17 )
+#define PC24_BIN_UART3_RI    ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 )
+#define PC25_BIN_UART3_DSR   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 )
+#define PC26_AOUT_UART3_DTR  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 )
+#define PC27_BIN_UART3_DCD   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 )
+#define PC28_BIN_UART3_CTS   ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 )
+#define PC29_AOUT_UART3_RTS  ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 )
+#define PC30_BIN_UART3_TX    ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 )
+#define PC31_AOUT_UART3_RX   ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
+#define PD6_PF_LSCLK         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
+#define PD7_PF_REV           ( GPIO_PORTD | GPIO_PF | 7 )
+#define PD7_AF_UART2_DTR     ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
+#define PD7_AIN_SPI2_SCLK    ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 )
+#define PD8_PF_CLS           ( GPIO_PORTD | GPIO_PF | 8 )
+#define PD8_AF_UART2_DCD     ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
+#define PD8_AIN_SPI2_SS      ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 )
+#define PD9_PF_PS            ( GPIO_PORTD | GPIO_PF | 9 )
+#define PD9_AF_UART2_RI      ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
+#define PD9_AOUT_SPI2_RXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 )
+#define PD10_PF_SPL_SPR      ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
+#define PD10_AF_UART2_DSR    ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
+#define PD10_AIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 )
+#define PD11_PF_CONTRAST     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
+#define PD12_PF_ACD_OE       ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
+#define PD13_PF_LP_HSYNC     ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
+#define PD14_PF_FLM_VSYNC    ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
+#define PD15_PF_LD0          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
+#define PD16_PF_LD1          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
+#define PD17_PF_LD2          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
+#define PD18_PF_LD3          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
+#define PD19_PF_LD4          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
+#define PD20_PF_LD5          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
+#define PD21_PF_LD6          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
+#define PD22_PF_LD7          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
+#define PD23_PF_LD8          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
+#define PD24_PF_LD9          ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
+#define PD25_PF_LD10         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
+#define PD26_PF_LD11         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
+#define PD27_PF_LD12         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
+#define PD28_PF_LD13         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
+#define PD29_PF_LD14         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
+#define PD30_PF_LD15         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
+#define PD31_PF_TMR2OUT      ( GPIO_PORTD | GPIO_PF | 31 )
+#define PD31_BIN_SPI2_TXD    ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 )
+
+/*
+ * PWM controller
+ */
+#define PWMC	__REG(IMX_PWM_BASE + 0x00)	/* PWM Control Register		*/
+#define PWMS	__REG(IMX_PWM_BASE + 0x04)	/* PWM Sample Register		*/
+#define PWMP	__REG(IMX_PWM_BASE + 0x08)	/* PWM Period Register		*/
+#define PWMCNT	__REG(IMX_PWM_BASE + 0x0C)	/* PWM Counter Register		*/
+
+#define PWMC_HCTR		(0x01<<18)		/* Halfword FIFO Data Swapping	*/
+#define PWMC_BCTR		(0x01<<17)		/* Byte FIFO Data Swapping	*/
+#define PWMC_SWR		(0x01<<16)		/* Software Reset		*/
+#define PWMC_CLKSRC		(0x01<<15)		/* Clock Source			*/
+#define PWMC_PRESCALER(x)	(((x-1) & 0x7F) << 8)	/* PRESCALER			*/
+#define PWMC_IRQ		(0x01<< 7)		/* Interrupt Request		*/
+#define PWMC_IRQEN		(0x01<< 6)		/* Interrupt Request Enable	*/
+#define PWMC_FIFOAV		(0x01<< 5)		/* FIFO Available		*/
+#define PWMC_EN			(0x01<< 4)		/* Enables/Disables the PWM	*/
+#define PWMC_REPEAT(x)		(((x) & 0x03) << 2)	/* Sample Repeats		*/
+#define PWMC_CLKSEL(x)		(((x) & 0x03) << 0)	/* Clock Selection		*/
+
+#define PWMS_SAMPLE(x)		((x) & 0xFFFF)		/* Contains a two-sample word	*/
+#define PWMP_PERIOD(x)		((x) & 0xFFFF)		/* Represents the PWM's period	*/
+#define PWMC_COUNTER(x)		((x) & 0xFFFF)		/* Represents the current count value	*/
+
+/*
+ *  DMA Controller
+ */
+#define DCR     __REG(IMX_DMAC_BASE +0x00)	/* DMA Control Register */
+#define DISR    __REG(IMX_DMAC_BASE +0x04)	/* DMA Interrupt status Register */
+#define DIMR    __REG(IMX_DMAC_BASE +0x08)	/* DMA Interrupt mask Register */
+#define DBTOSR  __REG(IMX_DMAC_BASE +0x0c)	/* DMA Burst timeout status Register */
+#define DRTOSR  __REG(IMX_DMAC_BASE +0x10)	/* DMA Request timeout Register */
+#define DSESR   __REG(IMX_DMAC_BASE +0x14)	/* DMA Transfer Error Status Register */
+#define DBOSR   __REG(IMX_DMAC_BASE +0x18)	/* DMA Buffer overflow status Register */
+#define DBTOCR  __REG(IMX_DMAC_BASE +0x1c)	/* DMA Burst timeout control Register */
+#define WSRA    __REG(IMX_DMAC_BASE +0x40)	/* W-Size Register A */
+#define XSRA    __REG(IMX_DMAC_BASE +0x44)	/* X-Size Register A */
+#define YSRA    __REG(IMX_DMAC_BASE +0x48)	/* Y-Size Register A */
+#define WSRB    __REG(IMX_DMAC_BASE +0x4c)	/* W-Size Register B */
+#define XSRB    __REG(IMX_DMAC_BASE +0x50)	/* X-Size Register B */
+#define YSRB    __REG(IMX_DMAC_BASE +0x54)	/* Y-Size Register B */
+#define SAR(x)  __REG2( IMX_DMAC_BASE + 0x80, (x) << 6)	/* Source Address Registers */
+#define DAR(x)  __REG2( IMX_DMAC_BASE + 0x84, (x) << 6)	/* Destination Address Registers */
+#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6)	/* Count Registers */
+#define CCR(x)  __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6)	/* Control Registers */
+#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6)	/* Request source select Registers */
+#define BLR(x)  __REG2( IMX_DMAC_BASE + 0x94, (x) << 6)	/* Burst length Registers */
+#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Request timeout Registers */
+#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6)	/* Bus Utilization Registers */
+
+#define DCR_DRST           (1<<1)
+#define DCR_DEN            (1<<0)
+#define DBTOCR_EN          (1<<15)
+#define DBTOCR_CNT(x)      ((x) & 0x7fff )
+#define CNTR_CNT(x)        ((x) & 0xffffff )
+#define CCR_DMOD_LINEAR    ( 0x0 << 12 )
+#define CCR_DMOD_2D        ( 0x1 << 12 )
+#define CCR_DMOD_FIFO      ( 0x2 << 12 )
+#define CCR_DMOD_EOBFIFO   ( 0x3 << 12 )
+#define CCR_SMOD_LINEAR    ( 0x0 << 10 )
+#define CCR_SMOD_2D        ( 0x1 << 10 )
+#define CCR_SMOD_FIFO      ( 0x2 << 10 )
+#define CCR_SMOD_EOBFIFO   ( 0x3 << 10 )
+#define CCR_MDIR_DEC       (1<<9)
+#define CCR_MSEL_B         (1<<8)
+#define CCR_DSIZ_32        ( 0x0 << 6 )
+#define CCR_DSIZ_8         ( 0x1 << 6 )
+#define CCR_DSIZ_16        ( 0x2 << 6 )
+#define CCR_SSIZ_32        ( 0x0 << 4 )
+#define CCR_SSIZ_8         ( 0x1 << 4 )
+#define CCR_SSIZ_16        ( 0x2 << 4 )
+#define CCR_REN            (1<<3)
+#define CCR_RPT            (1<<2)
+#define CCR_FRC            (1<<1)
+#define CCR_CEN            (1<<0)
+#define RTOR_EN            (1<<15)
+#define RTOR_CLK           (1<<14)
+#define RTOR_PSC           (1<<13)
+
+/*
+ *  Interrupt controller
+ */
+
+#define IMX_INTCNTL        __REG(IMX_AITC_BASE+0x00)
+#define INTCNTL_FIAD       (1<<19)
+#define INTCNTL_NIAD       (1<<20)
+
+#define IMX_NIMASK         __REG(IMX_AITC_BASE+0x04)
+#define IMX_INTENNUM       __REG(IMX_AITC_BASE+0x08)
+#define IMX_INTDISNUM      __REG(IMX_AITC_BASE+0x0c)
+#define IMX_INTENABLEH     __REG(IMX_AITC_BASE+0x10)
+#define IMX_INTENABLEL     __REG(IMX_AITC_BASE+0x14)
+
+/*
+ *  General purpose timers
+ */
+#define IMX_TCTL(x)        __REG( 0x00 + (x))
+#define TCTL_SWR           (1<<15)
+#define TCTL_FRR           (1<<8)
+#define TCTL_CAP_RIS       (1<<6)
+#define TCTL_CAP_FAL       (2<<6)
+#define TCTL_CAP_RIS_FAL   (3<<6)
+#define TCTL_OM            (1<<5)
+#define TCTL_IRQEN         (1<<4)
+#define TCTL_CLK_PCLK1     (1<<1)
+#define TCTL_CLK_PCLK1_16  (2<<1)
+#define TCTL_CLK_TIN       (3<<1)
+#define TCTL_CLK_32        (4<<1)
+#define TCTL_TEN           (1<<0)
+
+#define IMX_TPRER(x)       __REG( 0x04 + (x))
+#define IMX_TCMP(x)        __REG( 0x08 + (x))
+#define IMX_TCR(x)         __REG( 0x0C + (x))
+#define IMX_TCN(x)         __REG( 0x10 + (x))
+#define IMX_TSTAT(x)       __REG( 0x14 + (x))
+#define TSTAT_CAPT         (1<<1)
+#define TSTAT_COMP         (1<<0)
+
+/*
+ * LCD Controller
+ */
+
+#define LCDC_SSA	__REG(IMX_LCDC_BASE+0x00)
+
+#define LCDC_SIZE	__REG(IMX_LCDC_BASE+0x04)
+#define SIZE_XMAX(x)	((((x) >> 4) & 0x3f) << 20)
+#define SIZE_YMAX(y)    ( (y) & 0x1ff )
+
+#define LCDC_VPW	__REG(IMX_LCDC_BASE+0x08)
+#define VPW_VPW(x)	( (x) & 0x3ff )
+
+#define LCDC_CPOS	__REG(IMX_LCDC_BASE+0x0C)
+#define CPOS_CC1        (1<<31)
+#define CPOS_CC0        (1<<30)
+#define CPOS_OP         (1<<28)
+#define CPOS_CXP(x)     (((x) & 3ff) << 16)
+#define CPOS_CYP(y)     ((y) & 0x1ff)
+
+#define LCDC_LCWHB	__REG(IMX_LCDC_BASE+0x10)
+#define LCWHB_BK_EN     (1<<31)
+#define LCWHB_CW(w)     (((w) & 0x1f) << 24)
+#define LCWHB_CH(h)     (((h) & 0x1f) << 16)
+#define LCWHB_BD(x)     ((x) & 0xff)
+
+#define LCDC_LCHCC	__REG(IMX_LCDC_BASE+0x14)
+#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11)
+#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5)
+#define LCHCC_CUR_COL_B(b) ((b) & 0x1f)
+
+#define LCDC_PCR	__REG(IMX_LCDC_BASE+0x18)
+#define PCR_TFT         (1<<31)
+#define PCR_COLOR       (1<<30)
+#define PCR_PBSIZ_1     (0<<28)
+#define PCR_PBSIZ_2     (1<<28)
+#define PCR_PBSIZ_4     (2<<28)
+#define PCR_PBSIZ_8     (3<<28)
+#define PCR_BPIX_1      (0<<25)
+#define PCR_BPIX_2      (1<<25)
+#define PCR_BPIX_4      (2<<25)
+#define PCR_BPIX_8      (3<<25)
+#define PCR_BPIX_12     (4<<25)
+#define PCR_BPIX_16     (4<<25)
+#define PCR_PIXPOL      (1<<24)
+#define PCR_FLMPOL      (1<<23)
+#define PCR_LPPOL       (1<<22)
+#define PCR_CLKPOL      (1<<21)
+#define PCR_OEPOL       (1<<20)
+#define PCR_SCLKIDLE    (1<<19)
+#define PCR_END_SEL     (1<<18)
+#define PCR_END_BYTE_SWAP (1<<17)
+#define PCR_REV_VS      (1<<16)
+#define PCR_ACD_SEL     (1<<15)
+#define PCR_ACD(x)      (((x) & 0x7f) << 8)
+#define PCR_SCLK_SEL    (1<<7)
+#define PCR_SHARP       (1<<6)
+#define PCR_PCD(x)      ((x) & 0x3f)
+
+#define LCDC_HCR	__REG(IMX_LCDC_BASE+0x1C)
+#define HCR_H_WIDTH(x)  (((x) & 0x3f) << 26)
+#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8)
+#define HCR_H_WAIT_2(x) ((x) & 0xff)
+
+#define LCDC_VCR	__REG(IMX_LCDC_BASE+0x20)
+#define VCR_V_WIDTH(x)  (((x) & 0x3f) << 26)
+#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8)
+#define VCR_V_WAIT_2(x) ((x) & 0xff)
+
+#define LCDC_POS	__REG(IMX_LCDC_BASE+0x24)
+#define POS_POS(x)      ((x) & 1f)
+
+#define LCDC_LSCR1	__REG(IMX_LCDC_BASE+0x28)
+#define LSCR1_PS_RISE_DELAY(x)    (((x) & 0x7f) << 26)
+#define LSCR1_CLS_RISE_DELAY(x)   (((x) & 0x3f) << 16)
+#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
+#define LSCR1_GRAY2(x)            (((x) & 0xf) << 4)
+#define LSCR1_GRAY1(x)            (((x) & 0xf))
+
+#define LCDC_PWMR	__REG(IMX_LCDC_BASE+0x2C)
+#define PWMR_CLS(x)     (((x) & 0x1ff) << 16)
+#define PWMR_LDMSK      (1<<15)
+#define PWMR_SCR1       (1<<10)
+#define PWMR_SCR0       (1<<9)
+#define PWMR_CC_EN      (1<<8)
+#define PWMR_PW(x)      ((x) & 0xff)
+
+#define LCDC_DMACR	__REG(IMX_LCDC_BASE+0x30)
+#define DMACR_BURST     (1<<31)
+#define DMACR_HM(x)     (((x) & 0xf) << 16)
+#define DMACR_TM(x)     ((x) &0xf)
+
+#define LCDC_RMCR	__REG(IMX_LCDC_BASE+0x34)
+#define RMCR_LCDC_EN		(1<<1)
+#define RMCR_SELF_REF		(1<<0)
+
+#define LCDC_LCDICR	__REG(IMX_LCDC_BASE+0x38)
+#define LCDICR_INT_SYN  (1<<2)
+#define LCDICR_INT_CON  (1)
+
+#define LCDC_LCDISR	__REG(IMX_LCDC_BASE+0x40)
+#define LCDISR_UDR_ERR (1<<3)
+#define LCDISR_ERR_RES (1<<2)
+#define LCDISR_EOF     (1<<1)
+#define LCDISR_BOF     (1<<0)
+
+#endif				// _IMX_REGS_H
diff --git a/arch/arm/mach-imx/include/mach/imx-uart.h b/arch/arm/mach-imx/include/mach/imx-uart.h
new file mode 100644
index 000000000000..d54eb1d48026
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/imx-uart.h
@@ -0,0 +1,12 @@
+#ifndef ASMARM_ARCH_UART_H
+#define ASMARM_ARCH_UART_H
+
+#define IMXUART_HAVE_RTSCTS (1<<0)
+
+struct imxuart_platform_data {
+	int (*init)(struct platform_device *pdev);
+	void (*exit)(struct platform_device *pdev);
+	unsigned int flags;
+};
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/imxfb.h b/arch/arm/mach-imx/include/mach/imxfb.h
new file mode 100644
index 000000000000..3ed9ec8b9f00
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/imxfb.h
@@ -0,0 +1,37 @@
+/*
+ * This structure describes the machine which we are running on.
+ */
+struct imxfb_mach_info {
+	u_long		pixclock;
+
+	u_short		xres;
+	u_short		yres;
+
+	u_int		nonstd;
+	u_char		bpp;
+	u_char		hsync_len;
+	u_char		left_margin;
+	u_char		right_margin;
+
+	u_char		vsync_len;
+	u_char		upper_margin;
+	u_char		lower_margin;
+	u_char		sync;
+
+	u_int		cmap_greyscale:1,
+			cmap_inverse:1,
+			cmap_static:1,
+			unused:29;
+
+	u_int		pcr;
+	u_int		pwmr;
+	u_int		lscr1;
+	u_int		dmacr;
+
+	u_char * fixed_screen_cpu;
+	dma_addr_t fixed_screen_dma;
+
+	void (*lcd_power)(int);
+	void (*backlight_power)(int);
+};
+void set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info);
diff --git a/arch/arm/mach-imx/include/mach/io.h b/arch/arm/mach-imx/include/mach/io.h
new file mode 100644
index 000000000000..c50c5fa6fb81
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/io.h
@@ -0,0 +1,30 @@
+/*
+ *  arch/arm/mach-imxads/include/mach/io.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)		((void __iomem *)(a))
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/irqs.h b/arch/arm/mach-imx/include/mach/irqs.h
new file mode 100644
index 000000000000..eb8d5bd05d56
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/irqs.h
@@ -0,0 +1,116 @@
+/*
+ *  arch/arm/mach-imxads/include/mach/irqs.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ARM_IRQS_H__
+#define __ARM_IRQS_H__
+
+/* Use the imx definitions */
+#include <mach/hardware.h>
+
+/*
+ *  IMX Interrupt numbers
+ *
+ */
+#define INT_SOFTINT                 0
+#define CSI_INT                     6
+#define DSPA_MAC_INT                7
+#define DSPA_INT                    8
+#define COMP_INT                    9
+#define MSHC_XINT                   10
+#define GPIO_INT_PORTA              11
+#define GPIO_INT_PORTB              12
+#define GPIO_INT_PORTC              13
+#define LCDC_INT                    14
+#define SIM_INT                     15
+#define SIM_DATA_INT                16
+#define RTC_INT                     17
+#define RTC_SAMINT                  18
+#define UART2_MINT_PFERR            19
+#define UART2_MINT_RTS              20
+#define UART2_MINT_DTR              21
+#define UART2_MINT_UARTC            22
+#define UART2_MINT_TX               23
+#define UART2_MINT_RX               24
+#define UART1_MINT_PFERR            25
+#define UART1_MINT_RTS              26
+#define UART1_MINT_DTR              27
+#define UART1_MINT_UARTC            28
+#define UART1_MINT_TX               29
+#define UART1_MINT_RX               30
+#define VOICE_DAC_INT               31
+#define VOICE_ADC_INT               32
+#define PEN_DATA_INT                33
+#define PWM_INT                     34
+#define SDHC_INT                    35
+#define I2C_INT                     39
+#define CSPI_INT                    41
+#define SSI_TX_INT                  42
+#define SSI_TX_ERR_INT              43
+#define SSI_RX_INT                  44
+#define SSI_RX_ERR_INT              45
+#define TOUCH_INT                   46
+#define USBD_INT0                   47
+#define USBD_INT1                   48
+#define USBD_INT2                   49
+#define USBD_INT3                   50
+#define USBD_INT4                   51
+#define USBD_INT5                   52
+#define USBD_INT6                   53
+#define BTSYS_INT                   55
+#define BTTIM_INT                   56
+#define BTWUI_INT                   57
+#define TIM2_INT                    58
+#define TIM1_INT                    59
+#define DMA_ERR                     60
+#define DMA_INT                     61
+#define GPIO_INT_PORTD              62
+
+#define IMX_IRQS                         (64)
+
+/* note: the IMX has four gpio ports (A-D), but only
+ *       the following pins are connected to the outside
+ *       world:
+ *
+ * PORT A: bits 0-31
+ * PORT B: bits 8-31
+ * PORT C: bits 3-17
+ * PORT D: bits 6-31
+ *
+ * We map these interrupts straight on. As a result we have
+ * several holes in the interrupt mapping. We do this for two
+ * reasons:
+ *   - mapping the interrupts without holes would get
+ *     far more complicated
+ *   - Motorola could well decide to bring some processor
+ *     with more pins connected
+ */
+
+#define IRQ_GPIOA(x)  (IMX_IRQS + x)
+#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
+
+#define NR_IRQS (IRQ_GPIOD(32) + 1)
+#define IRQ_GPIO(x)
+#endif
diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-imx/include/mach/memory.h
new file mode 100644
index 000000000000..5c453063c0ed
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/memory.h
@@ -0,0 +1,36 @@
+/*
+ *  arch/arm/mach-imx/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MMU_H
+#define __ASM_ARCH_MMU_H
+
+#define PHYS_OFFSET	UL(0x08000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(x - PAGE_OFFSET + PHYS_OFFSET)
+#define __bus_to_virt(x)	(x - PHYS_OFFSET + PAGE_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/mmc.h b/arch/arm/mach-imx/include/mach/mmc.h
new file mode 100644
index 000000000000..4712f354dcca
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mmc.h
@@ -0,0 +1,15 @@
+#ifndef ASMARM_ARCH_MMC_H
+#define ASMARM_ARCH_MMC_H
+
+#include <linux/mmc/host.h>
+
+struct device;
+
+struct imxmmc_platform_data {
+	int (*card_present)(struct device *);
+	int (*get_ro)(struct device *);
+};
+
+extern void imx_set_mmc_info(struct imxmmc_platform_data *info);
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/mx1ads.h b/arch/arm/mach-imx/include/mach/mx1ads.h
new file mode 100644
index 000000000000..def05d510eb3
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/mx1ads.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-imx/include/mach/mx1ads.h
+ *
+ * Copyright (C) 2004 Robert Schwebel, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __ASM_ARCH_MX1ADS_H
+#define __ASM_ARCH_MX1ADS_H
+
+/* ------------------------------------------------------------------------ */
+/* Memory Map for the M9328MX1ADS (MX1ADS) Board                            */
+/* ------------------------------------------------------------------------ */
+
+#define MX1ADS_FLASH_PHYS		0x10000000
+#define MX1ADS_FLASH_SIZE		(16*1024*1024)
+
+#define IMX_FB_PHYS			(0x0C000000 - 0x40000)
+
+#define CLK32 32000
+
+#endif /* __ASM_ARCH_MX1ADS_H */
diff --git a/arch/arm/mach-imx/include/mach/spi_imx.h b/arch/arm/mach-imx/include/mach/spi_imx.h
new file mode 100644
index 000000000000..4186430feecf
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/spi_imx.h
@@ -0,0 +1,72 @@
+/*
+ * arch/arm/mach-imx/include/mach/spi_imx.h
+ *
+ * Copyright (C) 2006 SWAPP
+ *	Andrea Paterniani <a.paterniani@swapp-eng.it>
+ *
+ * Initial version inspired by:
+ *	linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef SPI_IMX_H_
+#define SPI_IMX_H_
+
+
+/*-------------------------------------------------------------------------*/
+/**
+ * struct spi_imx_master - device.platform_data for SPI controller devices.
+ * @num_chipselect: chipselects are used to distinguish individual
+ *	SPI slaves, and are numbered from zero to num_chipselects - 1.
+ *	each slave has a chipselect signal, but it's common that not
+ *	every chipselect is connected to a slave.
+ * @enable_dma: if true enables DMA driven transfers.
+*/
+struct spi_imx_master {
+	u8 num_chipselect;
+	u8 enable_dma:1;
+};
+/*-------------------------------------------------------------------------*/
+
+
+/*-------------------------------------------------------------------------*/
+/**
+ * struct spi_imx_chip - spi_board_info.controller_data for SPI
+ * slave devices, copied to spi_device.controller_data.
+ * @enable_loopback : used for test purpouse to internally connect RX and TX
+ *	sections.
+ * @enable_dma : enables dma transfer (provided that controller driver has
+ *	dma enabled too).
+ * @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
+ * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
+ * @cs_control : function pointer to board-specific function to assert/deassert
+ *	I/O port to control HW generation of devices chip-select.
+*/
+struct spi_imx_chip {
+	u8	enable_loopback:1;
+	u8	enable_dma:1;
+	u8	ins_ss_pulse:1;
+	u16	bclk_wait:15;
+	void (*cs_control)(u32 control);
+};
+
+/* Chip-select state */
+#define SPI_CS_ASSERT			(1 << 0)
+#define SPI_CS_DEASSERT			(1 << 1)
+/*-------------------------------------------------------------------------*/
+
+
+#endif /* SPI_IMX_H_*/
diff --git a/arch/arm/mach-imx/include/mach/system.h b/arch/arm/mach-imx/include/mach/system.h
new file mode 100644
index 000000000000..adee7e51bab2
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/system.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-imxads/include/mach/system.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static void
+arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void
+arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/timex.h b/arch/arm/mach-imx/include/mach/timex.h
new file mode 100644
index 000000000000..e22ba789546c
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ *  linux/include/asm-arm/imx/timex.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE		(16000000)
+
+#endif
diff --git a/arch/arm/mach-imx/include/mach/uncompress.h b/arch/arm/mach-imx/include/mach/uncompress.h
new file mode 100644
index 000000000000..70523e67a8f6
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/uncompress.h
@@ -0,0 +1,71 @@
+/*
+ *  arch/arm/mach-imxads/include/mach/uncompress.h
+ *
+ *
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+#define UART1_BASE 0x206000
+#define UART2_BASE 0x207000
+#define USR2 0x98
+#define USR2_TXFE (1<<14)
+#define TXR  0x40
+#define UCR1 0x80
+#define UCR1_UARTEN 1
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+	unsigned long serial_port;
+
+	do {
+		serial_port = UART1_BASE;
+		if ( UART(UCR1) & UCR1_UARTEN )
+			break;
+		serial_port = UART2_BASE;
+		if ( UART(UCR1) & UCR1_UARTEN )
+			break;
+		return;
+	} while(0);
+
+	while (!(UART(USR2) & USR2_TXFE))
+		barrier();
+
+	UART(TXR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-imx/include/mach/vmalloc.h b/arch/arm/mach-imx/include/mach/vmalloc.h
new file mode 100644
index 000000000000..7d7cb0bde3e8
--- /dev/null
+++ b/arch/arm/mach-imx/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-imx/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c
index e6695c4e623b..798f221eb3b7 100644
--- a/arch/arm/mach-imx/irq.c
+++ b/arch/arm/mach-imx/irq.c
@@ -27,7 +27,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
@@ -111,7 +111,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 	reg = irq >> 5;
 	bit = 1 << (irq % 32);
 
-	if (type == IRQT_PROBE) {
+	if (type == IRQ_TYPE_PROBE) {
 		/* Don't mess with enabled GPIOs using preconfigured edges or
 		   GPIOs set to alternate function during probe */
 		/* TODO: support probe */
@@ -120,7 +120,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 //                      return 0;
 //              if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
 //                      return 0;
-//              type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+//              type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
 	GIUS(reg) |= bit;
@@ -128,19 +128,19 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type)
 
 	DEBUG_IRQ("setting type of irq %d to ", _irq);
 
-	if (type & __IRQT_RISEDGE) {
+	if (type & IRQ_TYPE_EDGE_RISING) {
 		DEBUG_IRQ("rising edges\n");
 		irq_type = 0x0;
 	}
-	if (type & __IRQT_FALEDGE) {
+	if (type & IRQ_TYPE_EDGE_FALLING) {
 		DEBUG_IRQ("falling edges\n");
 		irq_type = 0x1;
 	}
-	if (type & __IRQT_LOWLVL) {
+	if (type & IRQ_TYPE_LEVEL_LOW) {
 		DEBUG_IRQ("low level\n");
 		irq_type = 0x3;
 	}
-	if (type & __IRQT_HIGHLVL) {
+	if (type & IRQ_TYPE_LEVEL_HIGH) {
 		DEBUG_IRQ("high level\n");
 		irq_type = 0x2;
 	}
diff --git a/arch/arm/mach-imx/leds-mx1ads.c b/arch/arm/mach-imx/leds-mx1ads.c
index 79236404aec2..af81621f689b 100644
--- a/arch/arm/mach-imx/leds-mx1ads.c
+++ b/arch/arm/mach-imx/leds-mx1ads.c
@@ -13,7 +13,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/io.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index 9635d5812bcd..87fa1ff43b0b 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
@@ -25,8 +25,8 @@
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/mmc.h>
+#include <mach/imx-uart.h>
 #include <linux/interrupt.h>
 #include "generic.h"
 
@@ -125,7 +125,7 @@ static struct platform_device *devices[] __initdata = {
 	&imx_uart2_device,
 };
 
-#ifdef CONFIG_MMC_IMX
+#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
 static int mx1ads_mmc_card_present(struct device *dev)
 {
 	/* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
@@ -143,7 +143,7 @@ mx1ads_init(void)
 #ifdef CONFIG_LEDS
 	imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
 #endif
-#ifdef CONFIG_MMC_IMX
+#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
 	/* SD/MMC card detect */
 	imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
 	imx_set_mmc_info(&mx1ads_mmc_info);
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index 5a41e96e8586..08be3875c59e 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -19,7 +19,7 @@
 #include <linux/clockchips.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 7fbbc17f8e8b..8bacf6d4d097 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -20,11 +20,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/hardware/arm_timer.h>
-#include <asm/arch/cm.h>
+#include <mach/cm.h>
 #include <asm/system.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c
index 71c58bff304c..ce5ea7c26675 100644
--- a/arch/arm/mach-integrator/cpu.c
+++ b/arch/arm/mach-integrator/cpu.c
@@ -20,7 +20,7 @@
 #include <linux/smp.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/icst525.h>
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 62e653a3ea1a..0a7b3267c8d8 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -23,8 +23,8 @@
 
 #include <asm/io.h>
 #include <asm/hardware/icst525.h>
-#include <asm/arch/lm.h>
-#include <asm/arch/impd1.h>
+#include <mach/lm.h>
+#include <mach/impd1.h>
 #include <asm/sizes.h>
 
 #include "clock.h"
@@ -393,9 +393,7 @@ static int impd1_probe(struct lm_device *dev)
 		if (!d)
 			continue;
 
-		snprintf(d->dev.bus_id, sizeof(d->dev.bus_id),
-			 "lm%x:%5.5lx", dev->id, idev->offset >> 12);
-
+		dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
 		d->dev.parent	= &dev->dev;
 		d->res.start	= dev->resource.start + idev->offset;
 		d->res.end	= d->res.start + SZ_4K - 1;
@@ -407,8 +405,7 @@ static int impd1_probe(struct lm_device *dev)
 
 		ret = amba_device_register(d, &dev->resource);
 		if (ret) {
-			printk("unable to register device %s: %d\n",
-				d->dev.bus_id, ret);
+			dev_err(&d->dev, "unable to register device: %d\n");
 			kfree(d);
 		}
 	}
diff --git a/arch/arm/mach-integrator/include/mach/bits.h b/arch/arm/mach-integrator/include/mach/bits.h
new file mode 100644
index 000000000000..09b024e0496a
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/bits.h
@@ -0,0 +1,61 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ *                 from .s file by awk -f s2h.awk
+ */
+/*  Bit field definitions
+ *  Copyright (C) ARM Limited 1998. All rights reserved.
+ */
+
+#ifndef __bits_h
+#define __bits_h                        1
+
+#define BIT0                            0x00000001
+#define BIT1                            0x00000002
+#define BIT2                            0x00000004
+#define BIT3                            0x00000008
+#define BIT4                            0x00000010
+#define BIT5                            0x00000020
+#define BIT6                            0x00000040
+#define BIT7                            0x00000080
+#define BIT8                            0x00000100
+#define BIT9                            0x00000200
+#define BIT10                           0x00000400
+#define BIT11                           0x00000800
+#define BIT12                           0x00001000
+#define BIT13                           0x00002000
+#define BIT14                           0x00004000
+#define BIT15                           0x00008000
+#define BIT16                           0x00010000
+#define BIT17                           0x00020000
+#define BIT18                           0x00040000
+#define BIT19                           0x00080000
+#define BIT20                           0x00100000
+#define BIT21                           0x00200000
+#define BIT22                           0x00400000
+#define BIT23                           0x00800000
+#define BIT24                           0x01000000
+#define BIT25                           0x02000000
+#define BIT26                           0x04000000
+#define BIT27                           0x08000000
+#define BIT28                           0x10000000
+#define BIT29                           0x20000000
+#define BIT30                           0x40000000
+#define BIT31                           0x80000000
+
+#endif
+
+/*         END */
diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h
new file mode 100644
index 000000000000..1ab353e23595
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/cm.h
@@ -0,0 +1,36 @@
+/*
+ * update the core module control register.
+ */
+void cm_control(u32, u32);
+
+#define CM_CTRL_LED			(1 << 0)
+#define CM_CTRL_nMBDET			(1 << 1)
+#define CM_CTRL_REMAP			(1 << 2)
+#define CM_CTRL_RESET			(1 << 3)
+
+/*
+ * Integrator/AP,PP2 specific
+ */
+#define CM_CTRL_HIGHVECTORS		(1 << 4)
+#define CM_CTRL_BIGENDIAN		(1 << 5)
+#define CM_CTRL_FASTBUS			(1 << 6)
+#define CM_CTRL_SYNC			(1 << 7)
+
+/*
+ * ARM926/946/966 Integrator/CP specific
+ */
+#define CM_CTRL_LCDBIASEN		(1 << 8)
+#define CM_CTRL_LCDBIASUP		(1 << 9)
+#define CM_CTRL_LCDBIASDN		(1 << 10)
+#define CM_CTRL_LCDMUXSEL_MASK		(7 << 11)
+#define CM_CTRL_LCDMUXSEL_GENLCD	(1 << 11)
+#define CM_CTRL_LCDMUXSEL_VGA_16BPP	(2 << 11)
+#define CM_CTRL_LCDMUXSEL_SHARPLCD	(3 << 11)
+#define CM_CTRL_LCDMUXSEL_VGA_8421BPP	(4 << 11)
+#define CM_CTRL_LCDEN0			(1 << 14)
+#define CM_CTRL_LCDEN1			(1 << 15)
+#define CM_CTRL_STATIC1			(1 << 16)
+#define CM_CTRL_STATIC2			(1 << 17)
+#define CM_CTRL_STATIC			(1 << 18)
+#define CM_CTRL_n24BITEN		(1 << 19)
+#define CM_CTRL_EBIWP			(1 << 20)
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
new file mode 100644
index 000000000000..d347d659ea30
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/* arch/arm/mach-integrator/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x16000000	@ physical base address
+		movne	\rx, #0xf0000000	@ virtual base
+		addne	\rx, \rx, #0x16000000 >> 4
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-integrator/include/mach/dma.h b/arch/arm/mach-integrator/include/mach/dma.h
new file mode 100644
index 000000000000..fbebe85a2db7
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/dma.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/dma.h
+ *
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-integrator/include/mach/entry-macro.S b/arch/arm/mach-integrator/include/mach/entry-macro.S
new file mode 100644
index 000000000000..7649c57acb53
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/entry-macro.S
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-integrator/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Integrator platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+/* FIXME: should not be using soo many LDRs here */
+		ldr	\base, =IO_ADDRESS(INTEGRATOR_IC_BASE)
+		mov	\irqnr, #IRQ_PIC_START
+		ldr	\irqstat, [\base, #IRQ_STATUS]		@ get masked status
+		ldr	\base, =IO_ADDRESS(INTEGRATOR_HDR_BASE)
+		teq	\irqstat, #0
+		ldreq	\irqstat, [\base, #(INTEGRATOR_HDR_IC_OFFSET+IRQ_STATUS)]
+		moveq	\irqnr, #IRQ_CIC_START
+
+1001:		tst	\irqstat, #15
+		bne	1002f
+		add	\irqnr, \irqnr, #4
+		movs	\irqstat, \irqstat, lsr #4
+		bne	1001b
+1002:		tst	\irqstat, #1
+		bne	1003f
+		add	\irqnr, \irqnr, #1
+		movs	\irqstat, \irqstat, lsr #1
+		bne	1002b
+1003:		/* EQ will be set if no irqs pending */
+		.endm
+
diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h
new file mode 100644
index 000000000000..1251319ef9ae
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/hardware.h
@@ -0,0 +1,48 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the Integrator.
+ *
+ *  Copyright (C) 1999 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/platform.h>
+
+/*
+ * Where in virtual memory the IO devices (timers, system controllers
+ * and so on)
+ */
+#define IO_BASE			0xF0000000                 // VA of IO 
+#define IO_SIZE			0x0B000000                 // How much?
+#define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
+
+#define PCIO_BASE		PCI_IO_VADDR
+#define PCIMEM_BASE		PCI_MEMORY_VADDR
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x) (((x) >> 4) + IO_BASE) 
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0x6000
+#define PCIBIOS_MIN_MEM 	0x00100000
+
+#endif
+
diff --git a/arch/arm/mach-integrator/include/mach/impd1.h b/arch/arm/mach-integrator/include/mach/impd1.h
new file mode 100644
index 000000000000..d75de4b14237
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/impd1.h
@@ -0,0 +1,18 @@
+#define IMPD1_OSC1	0x00
+#define IMPD1_OSC2	0x04
+#define IMPD1_LOCK	0x08
+#define IMPD1_LEDS	0x0c
+#define IMPD1_INT	0x10
+#define IMPD1_SW	0x14
+#define IMPD1_CTRL	0x18
+
+#define IMPD1_CTRL_DISP_LCD	(0 << 0)
+#define IMPD1_CTRL_DISP_VGA	(1 << 0)
+#define IMPD1_CTRL_DISP_LCD1	(2 << 0)
+#define IMPD1_CTRL_DISP_ENABLE	(1 << 2)
+#define IMPD1_CTRL_DISP_MASK	(7 << 0)
+
+struct device;
+
+void impd1_tweak_control(struct device *dev, u32 mask, u32 val);
+
diff --git a/arch/arm/mach-integrator/include/mach/io.h b/arch/arm/mach-integrator/include/mach/io.h
new file mode 100644
index 000000000000..f21bb5493dd9
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/io.h
@@ -0,0 +1,36 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/io.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffff
+
+/*
+ * WARNING: this has to mirror definitions in platform.h
+ */
+#define PCI_MEMORY_VADDR        0xe8000000
+#define PCI_CONFIG_VADDR        0xec000000
+#define PCI_V3_VADDR            0xed000000
+#define PCI_IO_VADDR            0xee000000
+
+#define __io(a)			((void __iomem *)(PCI_IO_VADDR + (a)))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-integrator/include/mach/irqs.h b/arch/arm/mach-integrator/include/mach/irqs.h
new file mode 100644
index 000000000000..1fbe6d190222
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/irqs.h
@@ -0,0 +1,82 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/irqs.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/* 
+ *  Interrupt numbers
+ */
+#define IRQ_PIC_START			0
+#define IRQ_SOFTINT			0
+#define IRQ_UARTINT0			1
+#define IRQ_UARTINT1			2
+#define IRQ_KMIINT0			3
+#define IRQ_KMIINT1			4
+#define IRQ_TIMERINT0			5
+#define IRQ_TIMERINT1			6
+#define IRQ_TIMERINT2			7
+#define IRQ_RTCINT			8
+#define IRQ_AP_EXPINT0			9
+#define IRQ_AP_EXPINT1			10
+#define IRQ_AP_EXPINT2			11
+#define IRQ_AP_EXPINT3			12
+#define IRQ_AP_PCIINT0			13
+#define IRQ_AP_PCIINT1			14
+#define IRQ_AP_PCIINT2			15
+#define IRQ_AP_PCIINT3			16
+#define IRQ_AP_V3INT			17
+#define IRQ_AP_CPINT0			18
+#define IRQ_AP_CPINT1			19
+#define IRQ_AP_LBUSTIMEOUT 		20
+#define IRQ_AP_APCINT			21
+#define IRQ_CP_CLCDCINT			22
+#define IRQ_CP_MMCIINT0			23
+#define IRQ_CP_MMCIINT1			24
+#define IRQ_CP_AACIINT			25
+#define IRQ_CP_CPPLDINT			26
+#define IRQ_CP_ETHINT			27
+#define IRQ_CP_TSPENINT			28
+#define IRQ_PIC_END			31
+
+#define IRQ_CIC_START			32
+#define IRQ_CM_SOFTINT			32
+#define IRQ_CM_COMMRX			33
+#define IRQ_CM_COMMTX			34
+#define IRQ_CIC_END			34
+
+/*
+ * IntegratorCP only
+ */
+#define IRQ_SIC_START			35
+#define IRQ_SIC_CP_SOFTINT		35
+#define IRQ_SIC_CP_RI0			36
+#define IRQ_SIC_CP_RI1			37
+#define IRQ_SIC_CP_CARDIN		38
+#define IRQ_SIC_CP_LMINT0		39
+#define IRQ_SIC_CP_LMINT1		40
+#define IRQ_SIC_CP_LMINT2		41
+#define IRQ_SIC_CP_LMINT3		42
+#define IRQ_SIC_CP_LMINT4		43
+#define IRQ_SIC_CP_LMINT5		44
+#define IRQ_SIC_CP_LMINT6		45
+#define IRQ_SIC_CP_LMINT7		46
+#define IRQ_SIC_END			46
+
+#define NR_IRQS                         47
+
diff --git a/arch/arm/mach-integrator/include/mach/lm.h b/arch/arm/mach-integrator/include/mach/lm.h
new file mode 100644
index 000000000000..28186b6f2c09
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/lm.h
@@ -0,0 +1,23 @@
+
+struct lm_device {
+	struct device		dev;
+	struct resource		resource;
+	unsigned int		irq;
+	unsigned int		id;
+};
+
+struct lm_driver {
+	struct device_driver	drv;
+	int			(*probe)(struct lm_device *);
+	void			(*remove)(struct lm_device *);
+	int			(*suspend)(struct lm_device *, pm_message_t);
+	int			(*resume)(struct lm_device *);
+};
+
+int lm_driver_register(struct lm_driver *drv);
+void lm_driver_unregister(struct lm_driver *drv);
+
+int lm_device_register(struct lm_device *dev);
+
+#define lm_get_drvdata(lm)	dev_get_drvdata(&(lm)->dev)
+#define lm_set_drvdata(lm,d)	dev_set_drvdata(&(lm)->dev, d)
diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h
new file mode 100644
index 000000000000..be7e63c21d25
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/memory.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/memory.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+#define BUS_OFFSET	UL(0x80000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(x - PAGE_OFFSET + BUS_OFFSET)
+#define __bus_to_virt(x)	(x - BUS_OFFSET + PAGE_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h
new file mode 100644
index 000000000000..83c4c1ceb411
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/platform.h
@@ -0,0 +1,469 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+/* DO NOT EDIT!! - this file automatically generated
+ *                 from .s file by awk -f s2h.awk
+ */
+/**************************************************************************
+ * * Copyright © ARM Limited 1998.  All rights reserved.
+ * ***********************************************************************/
+/* ************************************************************************
+ *
+ *   Integrator address map
+ *
+ * 	NOTE: This is a multi-hosted header file for use with uHAL and
+ * 	      supported debuggers.
+ *
+ * 	$Id: platform.s,v 1.32 2000/02/18 10:51:39 asims Exp $
+ *
+ * ***********************************************************************/
+
+#ifndef __address_h
+#define __address_h                     1
+
+/* ========================================================================
+ *  Integrator definitions
+ * ========================================================================
+ * ------------------------------------------------------------------------
+ *  Memory definitions
+ * ------------------------------------------------------------------------
+ *  Integrator memory map
+ *
+ */
+#define INTEGRATOR_BOOT_ROM_LO          0x00000000
+#define INTEGRATOR_BOOT_ROM_HI          0x20000000
+#define INTEGRATOR_BOOT_ROM_BASE        INTEGRATOR_BOOT_ROM_HI	 /*  Normal position */
+#define INTEGRATOR_BOOT_ROM_SIZE        SZ_512K
+
+/*
+ *  New Core Modules have different amounts of SSRAM, the amount of SSRAM
+ *  fitted can be found in HDR_STAT.
+ *
+ *  The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to
+ *  the minimum amount of SSRAM fitted on any core module.
+ *
+ *  New Core Modules also alias the SSRAM.
+ *
+ */
+#define INTEGRATOR_SSRAM_BASE           0x00000000
+#define INTEGRATOR_SSRAM_ALIAS_BASE     0x10800000
+#define INTEGRATOR_SSRAM_SIZE           SZ_256K
+
+#define INTEGRATOR_FLASH_BASE           0x24000000
+#define INTEGRATOR_FLASH_SIZE           SZ_32M
+
+#define INTEGRATOR_MBRD_SSRAM_BASE      0x28000000
+#define INTEGRATOR_MBRD_SSRAM_SIZE      SZ_512K
+
+/*
+ *  SDRAM is a SIMM therefore the size is not known.
+ *
+ */
+#define INTEGRATOR_SDRAM_BASE           0x00040000
+
+#define INTEGRATOR_SDRAM_ALIAS_BASE     0x80000000
+#define INTEGRATOR_HDR0_SDRAM_BASE      0x80000000
+#define INTEGRATOR_HDR1_SDRAM_BASE      0x90000000
+#define INTEGRATOR_HDR2_SDRAM_BASE      0xA0000000
+#define INTEGRATOR_HDR3_SDRAM_BASE      0xB0000000
+
+/*
+ *  Logic expansion modules
+ *
+ */
+#define INTEGRATOR_LOGIC_MODULES_BASE   0xC0000000
+#define INTEGRATOR_LOGIC_MODULE0_BASE   0xC0000000
+#define INTEGRATOR_LOGIC_MODULE1_BASE   0xD0000000
+#define INTEGRATOR_LOGIC_MODULE2_BASE   0xE0000000
+#define INTEGRATOR_LOGIC_MODULE3_BASE   0xF0000000
+
+/* ------------------------------------------------------------------------
+ *  Integrator header card registers
+ * ------------------------------------------------------------------------
+ *
+ */
+#define INTEGRATOR_HDR_ID_OFFSET        0x00
+#define INTEGRATOR_HDR_PROC_OFFSET      0x04
+#define INTEGRATOR_HDR_OSC_OFFSET       0x08
+#define INTEGRATOR_HDR_CTRL_OFFSET      0x0C
+#define INTEGRATOR_HDR_STAT_OFFSET      0x10
+#define INTEGRATOR_HDR_LOCK_OFFSET      0x14
+#define INTEGRATOR_HDR_SDRAM_OFFSET     0x20
+#define INTEGRATOR_HDR_INIT_OFFSET      0x24	 /*  CM9x6 */
+#define INTEGRATOR_HDR_IC_OFFSET        0x40
+#define INTEGRATOR_HDR_SPDBASE_OFFSET   0x100
+#define INTEGRATOR_HDR_SPDTOP_OFFSET    0x200
+
+#define INTEGRATOR_HDR_BASE             0x10000000
+#define INTEGRATOR_HDR_ID               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_ID_OFFSET)
+#define INTEGRATOR_HDR_PROC             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_PROC_OFFSET)
+#define INTEGRATOR_HDR_OSC              (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_OSC_OFFSET)
+#define INTEGRATOR_HDR_CTRL             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_CTRL_OFFSET)
+#define INTEGRATOR_HDR_STAT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_STAT_OFFSET)
+#define INTEGRATOR_HDR_LOCK             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_LOCK_OFFSET)
+#define INTEGRATOR_HDR_SDRAM            (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SDRAM_OFFSET)
+#define INTEGRATOR_HDR_INIT             (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_INIT_OFFSET)
+#define INTEGRATOR_HDR_IC               (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_IC_OFFSET)
+#define INTEGRATOR_HDR_SPDBASE          (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDBASE_OFFSET)
+#define INTEGRATOR_HDR_SPDTOP           (INTEGRATOR_HDR_BASE + INTEGRATOR_HDR_SPDTOP_OFFSET)
+
+#define INTEGRATOR_HDR_CTRL_LED         0x01
+#define INTEGRATOR_HDR_CTRL_MBRD_DETECH 0x02
+#define INTEGRATOR_HDR_CTRL_REMAP       0x04
+#define INTEGRATOR_HDR_CTRL_RESET       0x08
+#define INTEGRATOR_HDR_CTRL_HIGHVECTORS 0x10
+#define INTEGRATOR_HDR_CTRL_BIG_ENDIAN  0x20
+#define INTEGRATOR_HDR_CTRL_FASTBUS     0x40
+#define INTEGRATOR_HDR_CTRL_SYNC        0x80
+
+#define INTEGRATOR_HDR_OSC_CORE_10MHz   0x102
+#define INTEGRATOR_HDR_OSC_CORE_15MHz   0x107
+#define INTEGRATOR_HDR_OSC_CORE_20MHz   0x10C
+#define INTEGRATOR_HDR_OSC_CORE_25MHz   0x111
+#define INTEGRATOR_HDR_OSC_CORE_30MHz   0x116
+#define INTEGRATOR_HDR_OSC_CORE_35MHz   0x11B
+#define INTEGRATOR_HDR_OSC_CORE_40MHz   0x120
+#define INTEGRATOR_HDR_OSC_CORE_45MHz   0x125
+#define INTEGRATOR_HDR_OSC_CORE_50MHz   0x12A
+#define INTEGRATOR_HDR_OSC_CORE_55MHz   0x12F
+#define INTEGRATOR_HDR_OSC_CORE_60MHz   0x134
+#define INTEGRATOR_HDR_OSC_CORE_65MHz   0x139
+#define INTEGRATOR_HDR_OSC_CORE_70MHz   0x13E
+#define INTEGRATOR_HDR_OSC_CORE_75MHz   0x143
+#define INTEGRATOR_HDR_OSC_CORE_80MHz   0x148
+#define INTEGRATOR_HDR_OSC_CORE_85MHz   0x14D
+#define INTEGRATOR_HDR_OSC_CORE_90MHz   0x152
+#define INTEGRATOR_HDR_OSC_CORE_95MHz   0x157
+#define INTEGRATOR_HDR_OSC_CORE_100MHz  0x15C
+#define INTEGRATOR_HDR_OSC_CORE_105MHz  0x161
+#define INTEGRATOR_HDR_OSC_CORE_110MHz  0x166
+#define INTEGRATOR_HDR_OSC_CORE_115MHz  0x16B
+#define INTEGRATOR_HDR_OSC_CORE_120MHz  0x170
+#define INTEGRATOR_HDR_OSC_CORE_125MHz  0x175
+#define INTEGRATOR_HDR_OSC_CORE_130MHz  0x17A
+#define INTEGRATOR_HDR_OSC_CORE_135MHz  0x17F
+#define INTEGRATOR_HDR_OSC_CORE_140MHz  0x184
+#define INTEGRATOR_HDR_OSC_CORE_145MHz  0x189
+#define INTEGRATOR_HDR_OSC_CORE_150MHz  0x18E
+#define INTEGRATOR_HDR_OSC_CORE_155MHz  0x193
+#define INTEGRATOR_HDR_OSC_CORE_160MHz  0x198
+#define INTEGRATOR_HDR_OSC_CORE_MASK    0x7FF
+
+#define INTEGRATOR_HDR_OSC_MEM_10MHz    0x10C000
+#define INTEGRATOR_HDR_OSC_MEM_15MHz    0x116000
+#define INTEGRATOR_HDR_OSC_MEM_20MHz    0x120000
+#define INTEGRATOR_HDR_OSC_MEM_25MHz    0x12A000
+#define INTEGRATOR_HDR_OSC_MEM_30MHz    0x134000
+#define INTEGRATOR_HDR_OSC_MEM_33MHz    0x13A000
+#define INTEGRATOR_HDR_OSC_MEM_40MHz    0x148000
+#define INTEGRATOR_HDR_OSC_MEM_50MHz    0x15C000
+#define INTEGRATOR_HDR_OSC_MEM_60MHz    0x170000
+#define INTEGRATOR_HDR_OSC_MEM_66MHz    0x17C000
+#define INTEGRATOR_HDR_OSC_MEM_MASK     0x7FF000
+
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM7x0  0x0
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x0  0x0800000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM9x6  0x1000000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_CM10x00  0x1800000
+#define INTEGRATOR_HDR_OSC_BUS_MODE_MASK  0x1800000
+
+#define INTEGRATOR_HDR_SDRAM_SPD_OK     (1 << 5)
+
+
+/* ------------------------------------------------------------------------
+ *  Integrator system registers
+ * ------------------------------------------------------------------------
+ *
+ */
+
+/*
+ *  System Controller
+ *
+ */
+#define INTEGRATOR_SC_ID_OFFSET         0x00
+#define INTEGRATOR_SC_OSC_OFFSET        0x04
+#define INTEGRATOR_SC_CTRLS_OFFSET      0x08
+#define INTEGRATOR_SC_CTRLC_OFFSET      0x0C
+#define INTEGRATOR_SC_DEC_OFFSET        0x10
+#define INTEGRATOR_SC_ARB_OFFSET        0x14
+#define INTEGRATOR_SC_PCIENABLE_OFFSET  0x18
+#define INTEGRATOR_SC_LOCK_OFFSET       0x1C
+
+#define INTEGRATOR_SC_BASE              0x11000000
+#define INTEGRATOR_SC_ID                (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ID_OFFSET)
+#define INTEGRATOR_SC_OSC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_OSC_OFFSET)
+#define INTEGRATOR_SC_CTRLS             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLS_OFFSET)
+#define INTEGRATOR_SC_CTRLC             (INTEGRATOR_SC_BASE + INTEGRATOR_SC_CTRLC_OFFSET)
+#define INTEGRATOR_SC_DEC               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_DEC_OFFSET)
+#define INTEGRATOR_SC_ARB               (INTEGRATOR_SC_BASE + INTEGRATOR_SC_ARB_OFFSET)
+#define INTEGRATOR_SC_PCIENABLE         (INTEGRATOR_SC_BASE + INTEGRATOR_SC_PCIENABLE_OFFSET)
+#define INTEGRATOR_SC_LOCK              (INTEGRATOR_SC_BASE + INTEGRATOR_SC_LOCK_OFFSET)
+
+#define INTEGRATOR_SC_OSC_SYS_10MHz     0x20
+#define INTEGRATOR_SC_OSC_SYS_15MHz     0x34
+#define INTEGRATOR_SC_OSC_SYS_20MHz     0x48
+#define INTEGRATOR_SC_OSC_SYS_25MHz     0x5C
+#define INTEGRATOR_SC_OSC_SYS_33MHz     0x7C
+#define INTEGRATOR_SC_OSC_SYS_MASK      0xFF
+
+#define INTEGRATOR_SC_OSC_PCI_25MHz     0x100
+#define INTEGRATOR_SC_OSC_PCI_33MHz     0x0
+#define INTEGRATOR_SC_OSC_PCI_MASK      0x100
+
+#define INTEGRATOR_SC_CTRL_SOFTRST      (1 << 0)
+#define INTEGRATOR_SC_CTRL_nFLVPPEN     (1 << 1)
+#define INTEGRATOR_SC_CTRL_nFLWP        (1 << 2)
+#define INTEGRATOR_SC_CTRL_URTS0        (1 << 4)
+#define INTEGRATOR_SC_CTRL_UDTR0        (1 << 5)
+#define INTEGRATOR_SC_CTRL_URTS1        (1 << 6)
+#define INTEGRATOR_SC_CTRL_UDTR1        (1 << 7)
+
+/*
+ *  External Bus Interface
+ *
+ */
+#define INTEGRATOR_EBI_BASE             0x12000000
+
+#define INTEGRATOR_EBI_CSR0_OFFSET      0x00
+#define INTEGRATOR_EBI_CSR1_OFFSET      0x04
+#define INTEGRATOR_EBI_CSR2_OFFSET      0x08
+#define INTEGRATOR_EBI_CSR3_OFFSET      0x0C
+#define INTEGRATOR_EBI_LOCK_OFFSET      0x20
+
+#define INTEGRATOR_EBI_CSR0             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR0_OFFSET)
+#define INTEGRATOR_EBI_CSR1             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET)
+#define INTEGRATOR_EBI_CSR2             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR2_OFFSET)
+#define INTEGRATOR_EBI_CSR3             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_CSR3_OFFSET)
+#define INTEGRATOR_EBI_LOCK             (INTEGRATOR_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET)
+
+#define INTEGRATOR_EBI_8_BIT            0x00
+#define INTEGRATOR_EBI_16_BIT           0x01
+#define INTEGRATOR_EBI_32_BIT           0x02
+#define INTEGRATOR_EBI_WRITE_ENABLE     0x04
+#define INTEGRATOR_EBI_SYNC             0x08
+#define INTEGRATOR_EBI_WS_2             0x00
+#define INTEGRATOR_EBI_WS_3             0x10
+#define INTEGRATOR_EBI_WS_4             0x20
+#define INTEGRATOR_EBI_WS_5             0x30
+#define INTEGRATOR_EBI_WS_6             0x40
+#define INTEGRATOR_EBI_WS_7             0x50
+#define INTEGRATOR_EBI_WS_8             0x60
+#define INTEGRATOR_EBI_WS_9             0x70
+#define INTEGRATOR_EBI_WS_10            0x80
+#define INTEGRATOR_EBI_WS_11            0x90
+#define INTEGRATOR_EBI_WS_12            0xA0
+#define INTEGRATOR_EBI_WS_13            0xB0
+#define INTEGRATOR_EBI_WS_14            0xC0
+#define INTEGRATOR_EBI_WS_15            0xD0
+#define INTEGRATOR_EBI_WS_16            0xE0
+#define INTEGRATOR_EBI_WS_17            0xF0
+
+
+#define INTEGRATOR_CT_BASE              0x13000000	 /*  Counter/Timers */
+#define INTEGRATOR_IC_BASE              0x14000000	 /*  Interrupt Controller */
+#define INTEGRATOR_RTC_BASE             0x15000000	 /*  Real Time Clock */
+#define INTEGRATOR_UART0_BASE           0x16000000	 /*  UART 0 */
+#define INTEGRATOR_UART1_BASE           0x17000000	 /*  UART 1 */
+#define INTEGRATOR_KBD_BASE             0x18000000	 /*  Keyboard */
+#define INTEGRATOR_MOUSE_BASE           0x19000000	 /*  Mouse */
+
+/*
+ *  LED's & Switches
+ *
+ */
+#define INTEGRATOR_DBG_ALPHA_OFFSET     0x00
+#define INTEGRATOR_DBG_LEDS_OFFSET      0x04
+#define INTEGRATOR_DBG_SWITCH_OFFSET    0x08
+
+#define INTEGRATOR_DBG_BASE             0x1A000000
+#define INTEGRATOR_DBG_ALPHA            (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_ALPHA_OFFSET)
+#define INTEGRATOR_DBG_LEDS             (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_LEDS_OFFSET)
+#define INTEGRATOR_DBG_SWITCH           (INTEGRATOR_DBG_BASE + INTEGRATOR_DBG_SWITCH_OFFSET)
+
+
+#if defined(CONFIG_ARCH_INTEGRATOR_AP)
+#define INTEGRATOR_GPIO_BASE            0x1B000000	 /*  GPIO */
+#elif defined(CONFIG_ARCH_INTEGRATOR_CP)
+#define INTEGRATOR_GPIO_BASE            0xC9000000	 /*  GPIO */
+#endif
+
+/* ------------------------------------------------------------------------
+ *  KMI keyboard/mouse definitions
+ * ------------------------------------------------------------------------
+ */
+/* PS2 Keyboard interface */
+#define KMI0_BASE                       INTEGRATOR_KBD_BASE
+
+/* PS2 Mouse interface */
+#define KMI1_BASE                       INTEGRATOR_MOUSE_BASE
+
+/* KMI definitions are now in include/asm-arm/hardware/amba_kmi.h -- rmk */
+
+/* ------------------------------------------------------------------------
+ *  Where in the memory map does PCI live?
+ * ------------------------------------------------------------------------
+ *  This represents a fairly liberal usage of address space.  Even though
+ *  the V3 only has two windows (therefore we need to map stuff on the fly),
+ *  we maintain the same addresses, even if they're not mapped.
+ *
+ */
+#define PHYS_PCI_MEM_BASE               0x40000000   /* 512M to xxx */
+/*  unused 256M from A0000000-AFFFFFFF might be used for I2O ???
+ */
+#define PHYS_PCI_IO_BASE                0x60000000   /* 16M to xxx */
+/*  unused (128-16)M from B1000000-B7FFFFFF
+ */
+#define PHYS_PCI_CONFIG_BASE            0x61000000   /* 16M to xxx */
+/*  unused ((128-16)M - 64K) from XXX
+ */
+#define PHYS_PCI_V3_BASE                0x62000000
+
+#define PCI_DRAMSIZE                    INTEGRATOR_SSRAM_SIZE
+
+/* 'export' these to UHAL */
+#define UHAL_PCI_IO                     PCI_IO_BASE
+#define UHAL_PCI_MEM                    PCI_MEM_BASE
+#define UHAL_PCI_ALLOC_IO_BASE          0x00004000
+#define UHAL_PCI_ALLOC_MEM_BASE         PCI_MEM_BASE
+#define UHAL_PCI_MAX_SLOT               20
+
+/* ========================================================================
+ *  Start of uHAL definitions
+ * ========================================================================
+ */
+
+/* ------------------------------------------------------------------------
+ *  Integrator Interrupt Controllers
+ * ------------------------------------------------------------------------
+ *
+ *  Offsets from interrupt controller base
+ *
+ *  System Controller interrupt controller base is
+ *
+ * 	INTEGRATOR_IC_BASE + (header_number << 6)
+ *
+ *  Core Module interrupt controller base is
+ *
+ * 	INTEGRATOR_HDR_IC
+ *
+ */
+#define IRQ_STATUS                      0
+#define IRQ_RAW_STATUS                  0x04
+#define IRQ_ENABLE                      0x08
+#define IRQ_ENABLE_SET                  0x08
+#define IRQ_ENABLE_CLEAR                0x0C
+
+#define INT_SOFT_SET                    0x10
+#define INT_SOFT_CLEAR                  0x14
+
+#define FIQ_STATUS                      0x20
+#define FIQ_RAW_STATUS                  0x24
+#define FIQ_ENABLE                      0x28
+#define FIQ_ENABLE_SET                  0x28
+#define FIQ_ENABLE_CLEAR                0x2C
+
+
+/* ------------------------------------------------------------------------
+ *  Interrupts
+ * ------------------------------------------------------------------------
+ *
+ *
+ *  Each Core Module has two interrupts controllers, one on the core module
+ *  itself and one in the system controller on the motherboard.  The
+ *  READ_INT macro in target.s reads both interrupt controllers and returns
+ *  a 32 bit bitmask, bits 0 to 23 are interrupts from the system controller
+ *  and bits 24 to 31 are from the core module.
+ *
+ *  The following definitions relate to the bitmask returned by READ_INT.
+ *
+ */
+
+/* ------------------------------------------------------------------------
+ *  LED's - The header LED is not accessible via the uHAL API
+ * ------------------------------------------------------------------------
+ *
+ */
+#define GREEN_LED                       0x01
+#define YELLOW_LED                      0x02
+#define RED_LED                         0x04
+#define GREEN_LED_2                     0x08
+#define ALL_LEDS                        0x0F
+
+#define LED_BANK                        INTEGRATOR_DBG_LEDS
+
+/*
+ *  Memory definitions - run uHAL out of SSRAM.
+ *
+ */
+#define uHAL_MEMORY_SIZE                INTEGRATOR_SSRAM_SIZE
+
+/*
+ *  Application Flash
+ *
+ */
+#define FLASH_BASE                      INTEGRATOR_FLASH_BASE
+#define FLASH_SIZE                      INTEGRATOR_FLASH_SIZE
+#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
+#define FLASH_BLOCK_SIZE                SZ_128K
+
+/*
+ *  Boot Flash
+ *
+ */
+#define EPROM_BASE                      INTEGRATOR_BOOT_ROM_HI
+#define EPROM_SIZE                      INTEGRATOR_BOOT_ROM_SIZE
+#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
+
+/*
+ *  Clean base - dummy
+ *
+ */
+#define CLEAN_BASE                      EPROM_BASE
+
+/*
+ *  Timer definitions
+ *
+ *  Only use timer 1 & 2
+ *  (both run at 24MHz and will need the clock divider set to 16).
+ *
+ *  Timer 0 runs at bus frequency and therefore could vary and currently
+ *  uHAL can't handle that.
+ *
+ */
+
+#define INTEGRATOR_TIMER0_BASE          INTEGRATOR_CT_BASE
+#define INTEGRATOR_TIMER1_BASE          (INTEGRATOR_CT_BASE + 0x100)
+#define INTEGRATOR_TIMER2_BASE          (INTEGRATOR_CT_BASE + 0x200)
+
+#define MAX_TIMER                       2
+#define MAX_PERIOD                      699050
+#define TICKS_PER_uSEC                  24
+
+/*
+ *  These are useconds NOT ticks.
+ *
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+#define INTEGRATOR_CSR_BASE             0x10000000
+#define INTEGRATOR_CSR_SIZE             0x10000000
+
+#endif
+
+/* 	END */
diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h
new file mode 100644
index 000000000000..c485345c8c77
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/system.h
@@ -0,0 +1,44 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/system.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/cm.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
+}
+
+#endif
diff --git a/arch/arm/mach-integrator/include/mach/timex.h b/arch/arm/mach-integrator/include/mach/timex.h
new file mode 100644
index 000000000000..1dcb42028c82
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/timex.h
+ *
+ *  Integrator architecture timex specifications
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * ??
+ */
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/arch/arm/mach-integrator/include/mach/uncompress.h b/arch/arm/mach-integrator/include/mach/uncompress.h
new file mode 100644
index 000000000000..30452f00a164
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/uncompress.h
@@ -0,0 +1,50 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define AMBA_UART_DR	(*(volatile unsigned char *)0x16000000)
+#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x16000008)
+#define AMBA_UART_LCRM	(*(volatile unsigned char *)0x1600000c)
+#define AMBA_UART_LCRL	(*(volatile unsigned char *)0x16000010)
+#define AMBA_UART_CR	(*(volatile unsigned char *)0x16000014)
+#define AMBA_UART_FR	(*(volatile unsigned char *)0x16000018)
+
+/*
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+	while (AMBA_UART_FR & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR = c;
+}
+
+static inline void flush(void)
+{
+	while (AMBA_UART_FR & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-integrator/include/mach/vmalloc.h b/arch/arm/mach-integrator/include/mach/vmalloc.h
new file mode 100644
index 000000000000..e87ab0b37bdd
--- /dev/null
+++ b/arch/arm/mach-integrator/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-integrator/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index df37e93c6fc9..6e472b5f8f26 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -28,14 +28,14 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/param.h>		/* HZ */
 #include <asm/mach-types.h>
 
-#include <asm/arch/lm.h>
+#include <mach/lm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 913f64b22405..6b99e9c258bd 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -20,15 +20,15 @@
 #include <linux/amba/kmi.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/hardware/icst525.h>
 
-#include <asm/arch/cm.h>
-#include <asm/arch/lm.h>
+#include <mach/cm.h>
+#include <mach/lm.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index f1436e683b49..7bc6881434ec 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -25,12 +25,12 @@
 #include <linux/smp.h>
 #include <linux/spinlock.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
-#include <asm/arch/cm.h>
+#include <mach/cm.h>
 
 static int saved_leds;
 
diff --git a/arch/arm/mach-integrator/lm.c b/arch/arm/mach-integrator/lm.c
index 622cdc4212dd..f52c7af31eaa 100644
--- a/arch/arm/mach-integrator/lm.c
+++ b/arch/arm/mach-integrator/lm.c
@@ -12,7 +12,7 @@
 #include <linux/device.h>
 #include <linux/slab.h>
 
-#include <asm/arch/lm.h>
+#include <mach/lm.h>
 
 #define to_lm_device(d)	container_of(d, struct lm_device, dev)
 #define to_lm_driver(d)	container_of(d, struct lm_driver, drv)
@@ -81,8 +81,10 @@ int lm_device_register(struct lm_device *dev)
 	dev->dev.release = lm_device_release;
 	dev->dev.bus = &lm_bustype;
 
-	snprintf(dev->dev.bus_id, sizeof(dev->dev.bus_id), "lm%d", dev->id);
-	dev->resource.name = dev->dev.bus_id;
+	ret = dev_set_name(&dev->dev, "lm%d", dev->id);
+	if (ret)
+		return ret;
+	dev->resource.name = dev_name(&dev->dev);
 
 	ret = request_resource(&iomem_resource, &dev->resource);
 	if (ret == 0) {
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index c07f497000ca..9f2b1ea8fb20 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -28,7 +28,7 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-iop13xx/include/mach/adma.h b/arch/arm/mach-iop13xx/include/mach/adma.h
new file mode 100644
index 000000000000..60019c8e6465
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/adma.h
@@ -0,0 +1,537 @@
+/*
+ * Copyright(c) 2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#ifndef _ADMA_H
+#define _ADMA_H
+#include <linux/types.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <asm/hardware/iop_adma.h>
+
+#define ADMA_ACCR(chan)	(chan->mmr_base + 0x0)
+#define ADMA_ACSR(chan)	(chan->mmr_base + 0x4)
+#define ADMA_ADAR(chan)	(chan->mmr_base + 0x8)
+#define ADMA_IIPCR(chan)	(chan->mmr_base + 0x18)
+#define ADMA_IIPAR(chan)	(chan->mmr_base + 0x1c)
+#define ADMA_IIPUAR(chan)	(chan->mmr_base + 0x20)
+#define ADMA_ANDAR(chan)	(chan->mmr_base + 0x24)
+#define ADMA_ADCR(chan)	(chan->mmr_base + 0x28)
+#define ADMA_CARMD(chan)	(chan->mmr_base + 0x2c)
+#define ADMA_ABCR(chan)	(chan->mmr_base + 0x30)
+#define ADMA_DLADR(chan)	(chan->mmr_base + 0x34)
+#define ADMA_DUADR(chan)	(chan->mmr_base + 0x38)
+#define ADMA_SLAR(src, chan)	(chan->mmr_base + (0x3c + (src << 3)))
+#define ADMA_SUAR(src, chan)	(chan->mmr_base + (0x40 + (src << 3)))
+
+struct iop13xx_adma_src {
+	u32 src_addr;
+	union {
+		u32 upper_src_addr;
+		struct {
+			unsigned int pq_upper_src_addr:24;
+			unsigned int pq_dmlt:8;
+		};
+	};
+};
+
+struct iop13xx_adma_desc_ctrl {
+	unsigned int int_en:1;
+	unsigned int xfer_dir:2;
+	unsigned int src_select:4;
+	unsigned int zero_result:1;
+	unsigned int block_fill_en:1;
+	unsigned int crc_gen_en:1;
+	unsigned int crc_xfer_dis:1;
+	unsigned int crc_seed_fetch_dis:1;
+	unsigned int status_write_back_en:1;
+	unsigned int endian_swap_en:1;
+	unsigned int reserved0:2;
+	unsigned int pq_update_xfer_en:1;
+	unsigned int dual_xor_en:1;
+	unsigned int pq_xfer_en:1;
+	unsigned int p_xfer_dis:1;
+	unsigned int reserved1:10;
+	unsigned int relax_order_en:1;
+	unsigned int no_snoop_en:1;
+};
+
+struct iop13xx_adma_byte_count {
+	unsigned int byte_count:24;
+	unsigned int host_if:3;
+	unsigned int reserved:2;
+	unsigned int zero_result_err_q:1;
+	unsigned int zero_result_err:1;
+	unsigned int tx_complete:1;
+};
+
+struct iop13xx_adma_desc_hw {
+	u32 next_desc;
+	union {
+		u32 desc_ctrl;
+		struct iop13xx_adma_desc_ctrl desc_ctrl_field;
+	};
+	union {
+		u32 crc_addr;
+		u32 block_fill_data;
+		u32 q_dest_addr;
+	};
+	union {
+		u32 byte_count;
+		struct iop13xx_adma_byte_count byte_count_field;
+	};
+	union {
+		u32 dest_addr;
+		u32 p_dest_addr;
+	};
+	union {
+		u32 upper_dest_addr;
+		u32 pq_upper_dest_addr;
+	};
+	struct iop13xx_adma_src src[1];
+};
+
+struct iop13xx_adma_desc_dual_xor {
+	u32 next_desc;
+	u32 desc_ctrl;
+	u32 reserved;
+	u32 byte_count;
+	u32 h_dest_addr;
+	u32 h_upper_dest_addr;
+	u32 src0_addr;
+	u32 upper_src0_addr;
+	u32 src1_addr;
+	u32 upper_src1_addr;
+	u32 h_src_addr;
+	u32 h_upper_src_addr;
+	u32 d_src_addr;
+	u32 d_upper_src_addr;
+	u32 d_dest_addr;
+	u32 d_upper_dest_addr;
+};
+
+struct iop13xx_adma_desc_pq_update {
+	u32 next_desc;
+	u32 desc_ctrl;
+	u32 reserved;
+	u32 byte_count;
+	u32 p_dest_addr;
+	u32 p_upper_dest_addr;
+	u32 src0_addr;
+	u32 upper_src0_addr;
+	u32 src1_addr;
+	u32 upper_src1_addr;
+	u32 p_src_addr;
+	u32 p_upper_src_addr;
+	u32 q_src_addr;
+	struct {
+		unsigned int q_upper_src_addr:24;
+		unsigned int q_dmlt:8;
+	};
+	u32 q_dest_addr;
+	u32 q_upper_dest_addr;
+};
+
+static inline int iop_adma_get_max_xor(void)
+{
+	return 16;
+}
+
+static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
+{
+	return __raw_readl(ADMA_ADAR(chan));
+}
+
+static inline void iop_chan_set_next_descriptor(struct iop_adma_chan *chan,
+						u32 next_desc_addr)
+{
+	__raw_writel(next_desc_addr, ADMA_ANDAR(chan));
+}
+
+#define ADMA_STATUS_BUSY (1 << 13)
+
+static inline char iop_chan_is_busy(struct iop_adma_chan *chan)
+{
+	if (__raw_readl(ADMA_ACSR(chan)) &
+		ADMA_STATUS_BUSY)
+		return 1;
+	else
+		return 0;
+}
+
+static inline int
+iop_chan_get_desc_align(struct iop_adma_chan *chan, int num_slots)
+{
+	return 1;
+}
+#define iop_desc_is_aligned(x, y) 1
+
+static inline int
+iop_chan_memcpy_slot_count(size_t len, int *slots_per_op)
+{
+	*slots_per_op = 1;
+	return 1;
+}
+
+#define iop_chan_interrupt_slot_count(s, c) iop_chan_memcpy_slot_count(0, s)
+
+static inline int
+iop_chan_memset_slot_count(size_t len, int *slots_per_op)
+{
+	*slots_per_op = 1;
+	return 1;
+}
+
+static inline int
+iop_chan_xor_slot_count(size_t len, int src_cnt, int *slots_per_op)
+{
+	static const char slot_count_table[] = { 1, 2, 2, 2,
+						 2, 3, 3, 3,
+						 3, 4, 4, 4,
+						 4, 5, 5, 5,
+						};
+	*slots_per_op = slot_count_table[src_cnt - 1];
+	return *slots_per_op;
+}
+
+#define ADMA_MAX_BYTE_COUNT	(16 * 1024 * 1024)
+#define IOP_ADMA_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
+#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
+#define IOP_ADMA_XOR_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
+#define iop_chan_zero_sum_slot_count(l, s, o) iop_chan_xor_slot_count(l, s, o)
+
+static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	return hw_desc->dest_addr;
+}
+
+static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	return hw_desc->byte_count_field.byte_count;
+}
+
+static inline u32 iop_desc_get_src_addr(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan,
+					int src_idx)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	return hw_desc->src[src_idx].src_addr;
+}
+
+static inline u32 iop_desc_get_src_count(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	return hw_desc->desc_ctrl_field.src_select + 1;
+}
+
+static inline void
+iop_desc_init_memcpy(struct iop_adma_desc_slot *desc, unsigned long flags)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+	hw_desc->crc_addr = 0;
+}
+
+static inline void
+iop_desc_init_memset(struct iop_adma_desc_slot *desc, unsigned long flags)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+	u_desc_ctrl.field.block_fill_en = 1;
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+	hw_desc->crc_addr = 0;
+}
+
+/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
+static inline void
+iop_desc_init_xor(struct iop_adma_desc_slot *desc, int src_cnt,
+		  unsigned long flags)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.src_select = src_cnt - 1;
+	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+	hw_desc->crc_addr = 0;
+
+}
+#define iop_desc_init_null_xor(d, s, i) iop_desc_init_xor(d, s, i)
+
+/* to do: support buffers larger than ADMA_MAX_BYTE_COUNT */
+static inline int
+iop_desc_init_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
+		       unsigned long flags)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	union {
+		u32 value;
+		struct iop13xx_adma_desc_ctrl field;
+	} u_desc_ctrl;
+
+	u_desc_ctrl.value = 0;
+	u_desc_ctrl.field.src_select = src_cnt - 1;
+	u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+	u_desc_ctrl.field.zero_result = 1;
+	u_desc_ctrl.field.status_write_back_en = 1;
+	u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+	hw_desc->desc_ctrl = u_desc_ctrl.value;
+	hw_desc->crc_addr = 0;
+
+	return 1;
+}
+
+static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan,
+					u32 byte_count)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	hw_desc->byte_count = byte_count;
+}
+
+static inline void
+iop_desc_set_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
+{
+	int slots_per_op = desc->slots_per_op;
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
+	int i = 0;
+
+	if (len <= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT) {
+		hw_desc->byte_count = len;
+	} else {
+		do {
+			iter = iop_hw_desc_slot_idx(hw_desc, i);
+			iter->byte_count = IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
+			len -= IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT;
+			i += slots_per_op;
+		} while (len > IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT);
+
+		if (len) {
+			iter = iop_hw_desc_slot_idx(hw_desc, i);
+			iter->byte_count = len;
+		}
+	}
+}
+
+
+static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
+					struct iop_adma_chan *chan,
+					dma_addr_t addr)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	hw_desc->dest_addr = addr;
+	hw_desc->upper_dest_addr = 0;
+}
+
+static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
+					dma_addr_t addr)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	hw_desc->src[0].src_addr = addr;
+	hw_desc->src[0].upper_src_addr = 0;
+}
+
+static inline void iop_desc_set_xor_src_addr(struct iop_adma_desc_slot *desc,
+					int src_idx, dma_addr_t addr)
+{
+	int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
+	int i = 0;
+
+	do {
+		iter = iop_hw_desc_slot_idx(hw_desc, i);
+		iter->src[src_idx].src_addr = addr;
+		iter->src[src_idx].upper_src_addr = 0;
+		slot_cnt -= slots_per_op;
+		if (slot_cnt) {
+			i += slots_per_op;
+			addr += IOP_ADMA_XOR_MAX_BYTE_COUNT;
+		}
+	} while (slot_cnt);
+}
+
+static inline void
+iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
+	struct iop_adma_chan *chan)
+{
+	iop_desc_init_memcpy(desc, 1);
+	iop_desc_set_byte_count(desc, chan, 0);
+	iop_desc_set_dest_addr(desc, chan, 0);
+	iop_desc_set_memcpy_src_addr(desc, 0);
+}
+
+#define iop_desc_set_zero_sum_src_addr iop_desc_set_xor_src_addr
+
+static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
+					u32 next_desc_addr)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	BUG_ON(hw_desc->next_desc);
+	hw_desc->next_desc = next_desc_addr;
+}
+
+static inline u32 iop_desc_get_next_desc(struct iop_adma_desc_slot *desc)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	return hw_desc->next_desc;
+}
+
+static inline void iop_desc_clear_next_desc(struct iop_adma_desc_slot *desc)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	hw_desc->next_desc = 0;
+}
+
+static inline void iop_desc_set_block_fill_val(struct iop_adma_desc_slot *desc,
+						u32 val)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	hw_desc->block_fill_data = val;
+}
+
+static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
+{
+	struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+	struct iop13xx_adma_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
+	struct iop13xx_adma_byte_count byte_count = hw_desc->byte_count_field;
+
+	BUG_ON(!(byte_count.tx_complete && desc_ctrl.zero_result));
+
+	if (desc_ctrl.pq_xfer_en)
+		return byte_count.zero_result_err_q;
+	else
+		return byte_count.zero_result_err;
+}
+
+static inline void iop_chan_append(struct iop_adma_chan *chan)
+{
+	u32 adma_accr;
+
+	adma_accr = __raw_readl(ADMA_ACCR(chan));
+	adma_accr |= 0x2;
+	__raw_writel(adma_accr, ADMA_ACCR(chan));
+}
+
+static inline u32 iop_chan_get_status(struct iop_adma_chan *chan)
+{
+	return __raw_readl(ADMA_ACSR(chan));
+}
+
+static inline void iop_chan_disable(struct iop_adma_chan *chan)
+{
+	u32 adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
+	adma_chan_ctrl &= ~0x1;
+	__raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
+}
+
+static inline void iop_chan_enable(struct iop_adma_chan *chan)
+{
+	u32 adma_chan_ctrl;
+
+	adma_chan_ctrl = __raw_readl(ADMA_ACCR(chan));
+	adma_chan_ctrl |= 0x1;
+	__raw_writel(adma_chan_ctrl, ADMA_ACCR(chan));
+}
+
+static inline void iop_adma_device_clear_eot_status(struct iop_adma_chan *chan)
+{
+	u32 status = __raw_readl(ADMA_ACSR(chan));
+	status &= (1 << 12);
+	__raw_writel(status, ADMA_ACSR(chan));
+}
+
+static inline void iop_adma_device_clear_eoc_status(struct iop_adma_chan *chan)
+{
+	u32 status = __raw_readl(ADMA_ACSR(chan));
+	status &= (1 << 11);
+	__raw_writel(status, ADMA_ACSR(chan));
+}
+
+static inline void iop_adma_device_clear_err_status(struct iop_adma_chan *chan)
+{
+	u32 status = __raw_readl(ADMA_ACSR(chan));
+	status &= (1 << 9) | (1 << 5) | (1 << 4) | (1 << 3);
+	__raw_writel(status, ADMA_ACSR(chan));
+}
+
+static inline int
+iop_is_err_int_parity(unsigned long status, struct iop_adma_chan *chan)
+{
+	return test_bit(9, &status);
+}
+
+static inline int
+iop_is_err_mcu_abort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return test_bit(5, &status);
+}
+
+static inline int
+iop_is_err_int_tabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return test_bit(4, &status);
+}
+
+static inline int
+iop_is_err_int_mabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return test_bit(3, &status);
+}
+
+static inline int
+iop_is_err_pci_tabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return 0;
+}
+
+static inline int
+iop_is_err_pci_mabort(unsigned long status, struct iop_adma_chan *chan)
+{
+	return 0;
+}
+
+static inline int
+iop_is_err_split_tx(unsigned long status, struct iop_adma_chan *chan)
+{
+	return 0;
+}
+
+#endif /* _ADMA_H */
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..9037d2e8557c
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-iop13xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+	.macro	addruart, rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1			@ mmu enabled?
+	moveq	\rx, #0xff000000	@ physical
+	orreq	\rx, \rx, #0x00d80000
+	movne	\rx, #0xfe000000	@ virtual
+	orrne	\rx, \rx, #0x00e80000
+	orr	\rx, \rx, #0x00002300
+	orr	\rx, \rx, #0x00000040
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-iop13xx/include/mach/dma.h b/arch/arm/mach-iop13xx/include/mach/dma.h
new file mode 100644
index 000000000000..d79846fbb394
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/dma.h
@@ -0,0 +1,3 @@
+#ifndef _IOP13XX_DMA_H
+#define _IOP13XX_DMA_H
+#endif
diff --git a/arch/arm/mach-iop13xx/include/mach/entry-macro.S b/arch/arm/mach-iop13xx/include/mach/entry-macro.S
new file mode 100644
index 000000000000..a624a7870c64
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/entry-macro.S
@@ -0,0 +1,45 @@
+/*
+ * iop13xx low level irq macros
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+	.macro  disable_fiq
+	.endm
+
+	.macro get_irqnr_preamble, base, tmp
+	mrc	p15, 0, \tmp, c15, c1, 0
+	orr	\tmp, \tmp, #(1 << 6)
+	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
+	.endm
+
+	/*
+	 * Note: a 1-cycle window exists where iintvec will return the value
+	 * of iintbase, so we explicitly check for "bad zeros"
+	 */
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	mrc	p6, 0, \irqnr, c3, c2, 0  	@ Read IINTVEC
+	cmp	\irqnr, #0
+	mrceq	p6, 0, \irqnr, c3, c2, 0  	@ Re-read on potentially bad zero
+	adds	\irqstat, \irqnr, #1	  	@ Check for 0xffffffff
+	movne	\irqnr, \irqnr, lsr #2	  	@ Convert to irqnr
+	.endm
+
+	.macro arch_ret_to_user, tmp1, tmp2
+	mrc	p15, 0, \tmp1, c15, c1, 0
+	ands	\tmp2, \tmp1, #(1 << 6)
+	bicne	\tmp1, \tmp1, #(1 << 6)
+	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
+	.endm
diff --git a/arch/arm/mach-iop13xx/include/mach/hardware.h b/arch/arm/mach-iop13xx/include/mach/hardware.h
new file mode 100644
index 000000000000..8e1d56289846
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/hardware.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+#include <asm/types.h>
+
+#define pcibios_assign_all_busses() 1
+
+#ifndef __ASSEMBLY__
+extern unsigned long iop13xx_pcibios_min_io;
+extern unsigned long iop13xx_pcibios_min_mem;
+extern u16 iop13xx_dev_id(void);
+extern void iop13xx_set_atu_mmr_bases(void);
+#endif
+
+#define PCIBIOS_MIN_IO      (iop13xx_pcibios_min_io)
+#define PCIBIOS_MIN_MEM     (iop13xx_pcibios_min_mem)
+
+/*
+ * Generic chipset bits
+ *
+ */
+#include "iop13xx.h"
+
+/*
+ * Board specific bits
+ */
+#include "iq81340.h"
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-iop13xx/include/mach/io.h b/arch/arm/mach-iop13xx/include/mach/io.h
new file mode 100644
index 000000000000..a6e0f9e6ddcf
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/io.h
@@ -0,0 +1,41 @@
+/*
+ * iop13xx custom ioremap implementation
+ * Copyright (c) 2005-2006, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) __iop13xx_io(a)
+#define __mem_pci(a) (a)
+#define __mem_isa(a) (a)
+
+extern void __iomem * __iop13xx_io(unsigned long io_addr);
+extern void __iomem *__iop13xx_ioremap(unsigned long cookie, size_t size,
+	unsigned int mtype);
+extern void __iop13xx_iounmap(void __iomem *addr);
+
+extern u32 iop13xx_atue_mem_base;
+extern u32 iop13xx_atux_mem_base;
+extern size_t iop13xx_atue_mem_size;
+extern size_t iop13xx_atux_mem_size;
+
+#define __arch_ioremap(a, s, f) __iop13xx_ioremap(a, s, f)
+#define __arch_iounmap(a)	 __iop13xx_iounmap(a)
+
+#endif
diff --git a/arch/arm/mach-iop13xx/include/mach/iop13xx.h b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
new file mode 100644
index 000000000000..52b7fab7ef60
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/iop13xx.h
@@ -0,0 +1,526 @@
+#ifndef _IOP13XX_HW_H_
+#define _IOP13XX_HW_H_
+
+#ifndef __ASSEMBLY__
+/* The ATU offsets can change based on the strapping */
+extern u32 iop13xx_atux_pmmr_offset;
+extern u32 iop13xx_atue_pmmr_offset;
+void iop13xx_init_irq(void);
+void iop13xx_map_io(void);
+void iop13xx_platform_init(void);
+void iop13xx_add_tpmi_devices(void);
+void iop13xx_init_irq(void);
+
+/* CPUID CP6 R0 Page 0 */
+static inline int iop13xx_cpu_id(void)
+{
+	int id;
+	asm volatile("mrc p6, 0, %0, c0, c0, 0":"=r" (id));
+	return id;
+}
+
+/* WDTCR CP6 R7 Page 9 */
+static inline u32 read_wdtcr(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c7, c9, 0":"=r" (val));
+	return val;
+}
+static inline void write_wdtcr(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c7, c9, 0"::"r" (val));
+}
+
+/* WDTSR CP6 R8 Page 9 */
+static inline u32 read_wdtsr(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c8, c9, 0":"=r" (val));
+	return val;
+}
+static inline void write_wdtsr(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c8, c9, 0"::"r" (val));
+}
+
+/* RCSR - Reset Cause Status Register  */
+static inline u32 read_rcsr(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c0, c1, 0":"=r" (val));
+	return val;
+}
+
+extern unsigned long get_iop_tick_rate(void);
+#endif
+
+/*
+ * IOP13XX I/O and Mem space regions for PCI autoconfiguration
+ */
+#define IOP13XX_MAX_RAM_SIZE    0x80000000UL  /* 2GB */
+#define IOP13XX_PCI_OFFSET	 IOP13XX_MAX_RAM_SIZE
+
+/* PCI MAP
+ * bus range		cpu phys	cpu virt	note
+ * 0x0000.0000 + 2GB	(n/a)		(n/a)		inbound, 1:1 mapping with Physical RAM
+ * 0x8000.0000 + 928M	0x1.8000.0000   (ioremap)	PCIX outbound memory window
+ * 0x8000.0000 + 928M	0x2.8000.0000   (ioremap)	PCIE outbound memory window
+ *
+ * IO MAP
+ * 0x1000 + 64K	0x0.fffb.1000	0xfec6.1000	PCIX outbound i/o window
+ * 0x1000 + 64K	0x0.fffd.1000	0xfed7.1000	PCIE outbound i/o window
+ */
+#define IOP13XX_PCIX_IO_WINDOW_SIZE   0x10000UL
+#define IOP13XX_PCIX_LOWER_IO_PA      0xfffb0000UL
+#define IOP13XX_PCIX_LOWER_IO_VA      0xfec60000UL
+#define IOP13XX_PCIX_LOWER_IO_BA      0x0UL /* OIOTVR */
+#define IOP13XX_PCIX_IO_BUS_OFFSET    0x1000UL
+#define IOP13XX_PCIX_UPPER_IO_PA      (IOP13XX_PCIX_LOWER_IO_PA +\
+				       IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
+#define IOP13XX_PCIX_UPPER_IO_VA      (IOP13XX_PCIX_LOWER_IO_VA +\
+				       IOP13XX_PCIX_IO_WINDOW_SIZE - 1)
+#define IOP13XX_PCIX_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
+					   (IOP13XX_PCIX_LOWER_IO_PA\
+					   - IOP13XX_PCIX_LOWER_IO_VA))
+
+#define IOP13XX_PCIX_MEM_PHYS_OFFSET  0x100000000ULL
+#define IOP13XX_PCIX_MEM_WINDOW_SIZE  0x3a000000UL
+#define IOP13XX_PCIX_LOWER_MEM_BA     (PHYS_OFFSET + IOP13XX_PCI_OFFSET)
+#define IOP13XX_PCIX_LOWER_MEM_PA     (IOP13XX_PCIX_MEM_PHYS_OFFSET +\
+				       IOP13XX_PCIX_LOWER_MEM_BA)
+#define IOP13XX_PCIX_UPPER_MEM_PA     (IOP13XX_PCIX_LOWER_MEM_PA +\
+				       IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PCIX_UPPER_MEM_BA     (IOP13XX_PCIX_LOWER_MEM_BA +\
+				       IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
+
+#define IOP13XX_PCIX_MEM_COOKIE        0x80000000UL
+#define IOP13XX_PCIX_LOWER_MEM_RA      IOP13XX_PCIX_MEM_COOKIE
+#define IOP13XX_PCIX_UPPER_MEM_RA      (IOP13XX_PCIX_LOWER_MEM_RA +\
+					IOP13XX_PCIX_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PCIX_MEM_OFFSET        (IOP13XX_PCIX_MEM_COOKIE -\
+					IOP13XX_PCIX_LOWER_MEM_BA)
+
+/* PCI-E ranges */
+#define IOP13XX_PCIE_IO_WINDOW_SIZE   	 0x10000UL
+#define IOP13XX_PCIE_LOWER_IO_PA      	 0xfffd0000UL
+#define IOP13XX_PCIE_LOWER_IO_VA      	 0xfed70000UL
+#define IOP13XX_PCIE_LOWER_IO_BA      	 0x0UL  /* OIOTVR */
+#define IOP13XX_PCIE_IO_BUS_OFFSET	 0x1000UL
+#define IOP13XX_PCIE_UPPER_IO_PA      	 (IOP13XX_PCIE_LOWER_IO_PA +\
+					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
+#define IOP13XX_PCIE_UPPER_IO_VA      	 (IOP13XX_PCIE_LOWER_IO_VA +\
+					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
+#define IOP13XX_PCIE_UPPER_IO_BA      	 (IOP13XX_PCIE_LOWER_IO_BA +\
+					 IOP13XX_PCIE_IO_WINDOW_SIZE - 1)
+#define IOP13XX_PCIE_IO_PHYS_TO_VIRT(addr) (u32) ((u32) addr -\
+					   (IOP13XX_PCIE_LOWER_IO_PA\
+					   - IOP13XX_PCIE_LOWER_IO_VA))
+
+#define IOP13XX_PCIE_MEM_PHYS_OFFSET  	 0x200000000ULL
+#define IOP13XX_PCIE_MEM_WINDOW_SIZE  	 0x3a000000UL
+#define IOP13XX_PCIE_LOWER_MEM_BA     	 (PHYS_OFFSET + IOP13XX_PCI_OFFSET)
+#define IOP13XX_PCIE_LOWER_MEM_PA     	 (IOP13XX_PCIE_MEM_PHYS_OFFSET +\
+					 IOP13XX_PCIE_LOWER_MEM_BA)
+#define IOP13XX_PCIE_UPPER_MEM_PA     	 (IOP13XX_PCIE_LOWER_MEM_PA +\
+					 IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PCIE_UPPER_MEM_BA     	 (IOP13XX_PCIE_LOWER_MEM_BA +\
+					 IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
+
+/* All 0xc000.0000 - 0xfdff.ffff addresses belong to PCIe */
+#define IOP13XX_PCIE_MEM_COOKIE       	 0xc0000000UL
+#define IOP13XX_PCIE_LOWER_MEM_RA     	 IOP13XX_PCIE_MEM_COOKIE
+#define IOP13XX_PCIE_UPPER_MEM_RA     	 (IOP13XX_PCIE_LOWER_MEM_RA +\
+					 IOP13XX_PCIE_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PCIE_MEM_OFFSET       	 (IOP13XX_PCIE_MEM_COOKIE -\
+					 IOP13XX_PCIE_LOWER_MEM_BA)
+
+/* PBI Ranges */
+#define IOP13XX_PBI_LOWER_MEM_PA	  0xf0000000UL
+#define IOP13XX_PBI_MEM_WINDOW_SIZE	  0x04000000UL
+#define IOP13XX_PBI_MEM_COOKIE		  0xfa000000UL
+#define IOP13XX_PBI_LOWER_MEM_RA	  IOP13XX_PBI_MEM_COOKIE
+#define IOP13XX_PBI_UPPER_MEM_RA	  (IOP13XX_PBI_LOWER_MEM_RA +\
+					  IOP13XX_PBI_MEM_WINDOW_SIZE - 1)
+
+/*
+ * IOP13XX chipset registers
+ */
+#define IOP13XX_PMMR_PHYS_MEM_BASE	   0xffd80000UL  /* PMMR phys. address */
+#define IOP13XX_PMMR_VIRT_MEM_BASE	   0xfee80000UL  /* PMMR phys. address */
+#define IOP13XX_PMMR_MEM_WINDOW_SIZE	   0x80000
+#define IOP13XX_PMMR_UPPER_MEM_VA	   (IOP13XX_PMMR_VIRT_MEM_BASE +\
+					   IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PMMR_UPPER_MEM_PA	   (IOP13XX_PMMR_PHYS_MEM_BASE +\
+					   IOP13XX_PMMR_MEM_WINDOW_SIZE - 1)
+#define IOP13XX_PMMR_VIRT_TO_PHYS(addr)   (u32) ((u32) addr +\
+					   (IOP13XX_PMMR_PHYS_MEM_BASE\
+					   - IOP13XX_PMMR_VIRT_MEM_BASE))
+#define IOP13XX_PMMR_PHYS_TO_VIRT(addr)   (u32) ((u32) addr -\
+					   (IOP13XX_PMMR_PHYS_MEM_BASE\
+					   - IOP13XX_PMMR_VIRT_MEM_BASE))
+#define IOP13XX_REG_ADDR32(reg)     	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
+#define IOP13XX_REG_ADDR16(reg)     	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
+#define IOP13XX_REG_ADDR8(reg)      	   (IOP13XX_PMMR_VIRT_MEM_BASE + (reg))
+#define IOP13XX_REG_ADDR32_PHYS(reg)      (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
+#define IOP13XX_REG_ADDR16_PHYS(reg)      (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
+#define IOP13XX_REG_ADDR8_PHYS(reg)       (IOP13XX_PMMR_PHYS_MEM_BASE + (reg))
+#define IOP13XX_PMMR_SIZE		   0x00080000
+
+/*=================== Defines for Platform Devices =====================*/
+#define IOP13XX_UART0_PHYS  (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002300)
+#define IOP13XX_UART1_PHYS  (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002340)
+#define IOP13XX_UART0_VIRT  (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002300)
+#define IOP13XX_UART1_VIRT  (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002340)
+
+#define IOP13XX_I2C0_PHYS   (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002500)
+#define IOP13XX_I2C1_PHYS   (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002520)
+#define IOP13XX_I2C2_PHYS   (IOP13XX_PMMR_PHYS_MEM_BASE | 0x00002540)
+#define IOP13XX_I2C0_VIRT   (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002500)
+#define IOP13XX_I2C1_VIRT   (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002520)
+#define IOP13XX_I2C2_VIRT   (IOP13XX_PMMR_VIRT_MEM_BASE | 0x00002540)
+
+/* ATU selection flags */
+/* IOP13XX_INIT_ATU_DEFAULT = Rely on CONFIG_IOP13XX_ATU* */
+#define IOP13XX_INIT_ATU_DEFAULT     (0)
+#define IOP13XX_INIT_ATU_ATUX	      (1 << 0)
+#define IOP13XX_INIT_ATU_ATUE	      (1 << 1)
+#define IOP13XX_INIT_ATU_NONE	      (1 << 2)
+
+/* UART selection flags */
+/* IOP13XX_INIT_UART_DEFAULT = Rely on CONFIG_IOP13XX_UART* */
+#define IOP13XX_INIT_UART_DEFAULT    (0)
+#define IOP13XX_INIT_UART_0	      (1 << 0)
+#define IOP13XX_INIT_UART_1	      (1 << 1)
+
+/* I2C selection flags */
+/* IOP13XX_INIT_I2C_DEFAULT = Rely on CONFIG_IOP13XX_I2C* */
+#define IOP13XX_INIT_I2C_DEFAULT     (0)
+#define IOP13XX_INIT_I2C_0	      (1 << 0)
+#define IOP13XX_INIT_I2C_1	      (1 << 1)
+#define IOP13XX_INIT_I2C_2	      (1 << 2)
+
+/* ADMA selection flags */
+/* INIT_ADMA_DEFAULT = Rely on CONFIG_IOP13XX_ADMA* */
+#define IOP13XX_INIT_ADMA_DEFAULT     (0)
+#define IOP13XX_INIT_ADMA_0           (1 << 0)
+#define IOP13XX_INIT_ADMA_1           (1 << 1)
+#define IOP13XX_INIT_ADMA_2           (1 << 2)
+
+/* Platform devices */
+#define IQ81340_NUM_UART     		2
+#define IQ81340_NUM_I2C      		3
+#define IQ81340_NUM_PHYS_MAP_FLASH	1
+#define IQ81340_NUM_ADMA     		3
+#define IQ81340_MAX_PLAT_DEVICES (IQ81340_NUM_UART + \
+				IQ81340_NUM_I2C + \
+				IQ81340_NUM_PHYS_MAP_FLASH + \
+				IQ81340_NUM_ADMA)
+
+/*========================== PMMR offsets for key registers ============*/
+#define IOP13XX_ATU0_PMMR_OFFSET   	0x00048000
+#define IOP13XX_ATU1_PMMR_OFFSET   	0x0004c000
+#define IOP13XX_ATU2_PMMR_OFFSET   	0x0004d000
+#define IOP13XX_ADMA0_PMMR_OFFSET  	0x00000000
+#define IOP13XX_ADMA1_PMMR_OFFSET  	0x00000200
+#define IOP13XX_ADMA2_PMMR_OFFSET  	0x00000400
+#define IOP13XX_PBI_PMMR_OFFSET    	0x00001580
+#define IOP13XX_MU_PMMR_OFFSET		0x00004000
+#define IOP13XX_ESSR0_PMMR_OFFSET  	0x00002188
+#define IOP13XX_ESSR0			IOP13XX_REG_ADDR32(0x00002188)
+
+#define IOP13XX_ESSR0_IFACE_MASK   	0x00004000  /* Interface PCI-X / PCI-E */
+#define IOP13XX_CONTROLLER_ONLY    	(1 << 14)
+#define IOP13XX_INTERFACE_SEL_PCIX 	(1 << 15)
+
+#define IOP13XX_PMON_PMMR_OFFSET	0x0001A000
+#define IOP13XX_PMON_BASE		(IOP13XX_PMMR_VIRT_MEM_BASE +\
+					IOP13XX_PMON_PMMR_OFFSET)
+#define IOP13XX_PMON_PHYSBASE		(IOP13XX_PMMR_PHYS_MEM_BASE +\
+					IOP13XX_PMON_PMMR_OFFSET)
+
+#define IOP13XX_PMON_CMD0		(IOP13XX_PMON_BASE + 0x0)
+#define IOP13XX_PMON_EVR0		(IOP13XX_PMON_BASE + 0x4)
+#define IOP13XX_PMON_STS0		(IOP13XX_PMON_BASE + 0x8)
+#define IOP13XX_PMON_DATA0		(IOP13XX_PMON_BASE + 0xC)
+
+#define IOP13XX_PMON_CMD3		(IOP13XX_PMON_BASE + 0x30)
+#define IOP13XX_PMON_EVR3		(IOP13XX_PMON_BASE + 0x34)
+#define IOP13XX_PMON_STS3		(IOP13XX_PMON_BASE + 0x38)
+#define IOP13XX_PMON_DATA3		(IOP13XX_PMON_BASE + 0x3C)
+
+#define IOP13XX_PMON_CMD7		(IOP13XX_PMON_BASE + 0x70)
+#define IOP13XX_PMON_EVR7		(IOP13XX_PMON_BASE + 0x74)
+#define IOP13XX_PMON_STS7		(IOP13XX_PMON_BASE + 0x78)
+#define IOP13XX_PMON_DATA7		(IOP13XX_PMON_BASE + 0x7C)
+
+#define IOP13XX_PMONEN			(IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E040)
+#define IOP13XX_PMONSTAT		(IOP13XX_PMMR_VIRT_MEM_BASE + 0x4E044)
+
+/*================================ATU===================================*/
+#define IOP13XX_ATUX_OFFSET(ofs)	IOP13XX_REG_ADDR32(\
+					iop13xx_atux_pmmr_offset + (ofs))
+
+#define IOP13XX_ATUX_DID		IOP13XX_REG_ADDR16(\
+					iop13xx_atux_pmmr_offset + 0x2)
+
+#define IOP13XX_ATUX_ATUCMD		IOP13XX_REG_ADDR16(\
+					iop13xx_atux_pmmr_offset + 0x4)
+#define IOP13XX_ATUX_ATUSR		IOP13XX_REG_ADDR16(\
+					iop13xx_atux_pmmr_offset + 0x6)
+
+#define IOP13XX_ATUX_IABAR0   		IOP13XX_ATUX_OFFSET(0x10)
+#define IOP13XX_ATUX_IAUBAR0  		IOP13XX_ATUX_OFFSET(0x14)
+#define IOP13XX_ATUX_IABAR1   		IOP13XX_ATUX_OFFSET(0x18)
+#define IOP13XX_ATUX_IAUBAR1  		IOP13XX_ATUX_OFFSET(0x1c)
+#define IOP13XX_ATUX_IABAR2   		IOP13XX_ATUX_OFFSET(0x20)
+#define IOP13XX_ATUX_IAUBAR2  		IOP13XX_ATUX_OFFSET(0x24)
+#define IOP13XX_ATUX_IALR0    		IOP13XX_ATUX_OFFSET(0x40)
+#define IOP13XX_ATUX_IATVR0   		IOP13XX_ATUX_OFFSET(0x44)
+#define IOP13XX_ATUX_IAUTVR0  		IOP13XX_ATUX_OFFSET(0x48)
+#define IOP13XX_ATUX_IALR1    		IOP13XX_ATUX_OFFSET(0x4c)
+#define IOP13XX_ATUX_IATVR1   		IOP13XX_ATUX_OFFSET(0x50)
+#define IOP13XX_ATUX_IAUTVR1  		IOP13XX_ATUX_OFFSET(0x54)
+#define IOP13XX_ATUX_IALR2    		IOP13XX_ATUX_OFFSET(0x58)
+#define IOP13XX_ATUX_IATVR2   		IOP13XX_ATUX_OFFSET(0x5c)
+#define IOP13XX_ATUX_IAUTVR2  		IOP13XX_ATUX_OFFSET(0x60)
+#define IOP13XX_ATUX_ATUCR    		IOP13XX_ATUX_OFFSET(0x70)
+#define IOP13XX_ATUX_PCSR     		IOP13XX_ATUX_OFFSET(0x74)
+#define IOP13XX_ATUX_ATUISR   		IOP13XX_ATUX_OFFSET(0x78)
+#define IOP13XX_ATUX_PCIXSR   		IOP13XX_ATUX_OFFSET(0xD4)
+#define IOP13XX_ATUX_IABAR3   		IOP13XX_ATUX_OFFSET(0x200)
+#define IOP13XX_ATUX_IAUBAR3  		IOP13XX_ATUX_OFFSET(0x204)
+#define IOP13XX_ATUX_IALR3    		IOP13XX_ATUX_OFFSET(0x208)
+#define IOP13XX_ATUX_IATVR3   		IOP13XX_ATUX_OFFSET(0x20c)
+#define IOP13XX_ATUX_IAUTVR3  		IOP13XX_ATUX_OFFSET(0x210)
+
+#define IOP13XX_ATUX_OIOBAR   		IOP13XX_ATUX_OFFSET(0x300)
+#define IOP13XX_ATUX_OIOWTVR  		IOP13XX_ATUX_OFFSET(0x304)
+#define IOP13XX_ATUX_OUMBAR0  		IOP13XX_ATUX_OFFSET(0x308)
+#define IOP13XX_ATUX_OUMWTVR0 		IOP13XX_ATUX_OFFSET(0x30c)
+#define IOP13XX_ATUX_OUMBAR1  		IOP13XX_ATUX_OFFSET(0x310)
+#define IOP13XX_ATUX_OUMWTVR1 		IOP13XX_ATUX_OFFSET(0x314)
+#define IOP13XX_ATUX_OUMBAR2  		IOP13XX_ATUX_OFFSET(0x318)
+#define IOP13XX_ATUX_OUMWTVR2 		IOP13XX_ATUX_OFFSET(0x31c)
+#define IOP13XX_ATUX_OUMBAR3  		IOP13XX_ATUX_OFFSET(0x320)
+#define IOP13XX_ATUX_OUMWTVR3 		IOP13XX_ATUX_OFFSET(0x324)
+#define IOP13XX_ATUX_OUDMABAR 		IOP13XX_ATUX_OFFSET(0x328)
+#define IOP13XX_ATUX_OUMSIBAR 		IOP13XX_ATUX_OFFSET(0x32c)
+#define IOP13XX_ATUX_OCCAR    		IOP13XX_ATUX_OFFSET(0x330)
+#define IOP13XX_ATUX_OCCDR    		IOP13XX_ATUX_OFFSET(0x334)
+
+#define IOP13XX_ATUX_ATUCR_OUT_EN		(1 << 1)
+#define IOP13XX_ATUX_PCSR_CENTRAL_RES		(1 << 25)
+#define IOP13XX_ATUX_PCSR_P_RSTOUT		(1 << 21)
+#define IOP13XX_ATUX_PCSR_OUT_Q_BUSY		(1 << 15)
+#define IOP13XX_ATUX_PCSR_IN_Q_BUSY		(1 << 14)
+#define IOP13XX_ATUX_PCSR_FREQ_OFFSET		(16)
+
+#define IOP13XX_ATUX_STAT_PCI_IFACE_ERR	(1 << 18)
+#define IOP13XX_ATUX_STAT_VPD_ADDR		(1 << 17)
+#define IOP13XX_ATUX_STAT_INT_PAR_ERR		(1 << 16)
+#define IOP13XX_ATUX_STAT_CFG_WRITE		(1 << 15)
+#define IOP13XX_ATUX_STAT_ERR_COR		(1 << 14)
+#define IOP13XX_ATUX_STAT_TX_SCEM		(1 << 13)
+#define IOP13XX_ATUX_STAT_REC_SCEM		(1 << 12)
+#define IOP13XX_ATUX_STAT_POWER_TRAN	 	(1 << 11)
+#define IOP13XX_ATUX_STAT_TX_SERR		(1 << 10)
+#define IOP13XX_ATUX_STAT_DET_PAR_ERR	 	(1 << 9	)
+#define IOP13XX_ATUX_STAT_BIST			(1 << 8	)
+#define IOP13XX_ATUX_STAT_INT_REC_MABORT 	(1 << 7	)
+#define IOP13XX_ATUX_STAT_REC_SERR		(1 << 4	)
+#define IOP13XX_ATUX_STAT_EXT_REC_MABORT 	(1 << 3	)
+#define IOP13XX_ATUX_STAT_EXT_REC_TABORT 	(1 << 2	)
+#define IOP13XX_ATUX_STAT_EXT_SIG_TABORT 	(1 << 1	)
+#define IOP13XX_ATUX_STAT_MASTER_DATA_PAR	(1 << 0	)
+
+#define IOP13XX_ATUX_PCIXSR_BUS_NUM	(8)
+#define IOP13XX_ATUX_PCIXSR_DEV_NUM	(3)
+#define IOP13XX_ATUX_PCIXSR_FUNC_NUM	(0)
+
+#define IOP13XX_ATUX_IALR_DISABLE  	0x00000001
+#define IOP13XX_ATUX_OUMBAR_ENABLE 	0x80000000
+
+#define IOP13XX_ATUE_OFFSET(ofs)	IOP13XX_REG_ADDR32(\
+					iop13xx_atue_pmmr_offset + (ofs))
+
+#define IOP13XX_ATUE_DID		IOP13XX_REG_ADDR16(\
+					iop13xx_atue_pmmr_offset + 0x2)
+#define IOP13XX_ATUE_ATUCMD		IOP13XX_REG_ADDR16(\
+					iop13xx_atue_pmmr_offset + 0x4)
+#define IOP13XX_ATUE_ATUSR		IOP13XX_REG_ADDR16(\
+					iop13xx_atue_pmmr_offset + 0x6)
+
+#define IOP13XX_ATUE_IABAR0		IOP13XX_ATUE_OFFSET(0x10)
+#define IOP13XX_ATUE_IAUBAR0		IOP13XX_ATUE_OFFSET(0x14)
+#define IOP13XX_ATUE_IABAR1		IOP13XX_ATUE_OFFSET(0x18)
+#define IOP13XX_ATUE_IAUBAR1		IOP13XX_ATUE_OFFSET(0x1c)
+#define IOP13XX_ATUE_IABAR2		IOP13XX_ATUE_OFFSET(0x20)
+#define IOP13XX_ATUE_IAUBAR2		IOP13XX_ATUE_OFFSET(0x24)
+#define IOP13XX_ATUE_IALR0		IOP13XX_ATUE_OFFSET(0x40)
+#define IOP13XX_ATUE_IATVR0		IOP13XX_ATUE_OFFSET(0x44)
+#define IOP13XX_ATUE_IAUTVR0		IOP13XX_ATUE_OFFSET(0x48)
+#define IOP13XX_ATUE_IALR1		IOP13XX_ATUE_OFFSET(0x4c)
+#define IOP13XX_ATUE_IATVR1		IOP13XX_ATUE_OFFSET(0x50)
+#define IOP13XX_ATUE_IAUTVR1		IOP13XX_ATUE_OFFSET(0x54)
+#define IOP13XX_ATUE_IALR2		IOP13XX_ATUE_OFFSET(0x58)
+#define IOP13XX_ATUE_IATVR2		IOP13XX_ATUE_OFFSET(0x5c)
+#define IOP13XX_ATUE_IAUTVR2		IOP13XX_ATUE_OFFSET(0x60)
+#define IOP13XX_ATUE_PE_LSTS		IOP13XX_REG_ADDR16(\
+					iop13xx_atue_pmmr_offset + 0xe2)
+#define IOP13XX_ATUE_OIOWTVR		IOP13XX_ATUE_OFFSET(0x304)
+#define IOP13XX_ATUE_OUMBAR0		IOP13XX_ATUE_OFFSET(0x308)
+#define IOP13XX_ATUE_OUMWTVR0		IOP13XX_ATUE_OFFSET(0x30c)
+#define IOP13XX_ATUE_OUMBAR1		IOP13XX_ATUE_OFFSET(0x310)
+#define IOP13XX_ATUE_OUMWTVR1		IOP13XX_ATUE_OFFSET(0x314)
+#define IOP13XX_ATUE_OUMBAR2		IOP13XX_ATUE_OFFSET(0x318)
+#define IOP13XX_ATUE_OUMWTVR2		IOP13XX_ATUE_OFFSET(0x31c)
+#define IOP13XX_ATUE_OUMBAR3		IOP13XX_ATUE_OFFSET(0x320)
+#define IOP13XX_ATUE_OUMWTVR3		IOP13XX_ATUE_OFFSET(0x324)
+
+#define IOP13XX_ATUE_ATUCR		IOP13XX_ATUE_OFFSET(0x70)
+#define IOP13XX_ATUE_PCSR		IOP13XX_ATUE_OFFSET(0x74)
+#define IOP13XX_ATUE_ATUISR		IOP13XX_ATUE_OFFSET(0x78)
+#define IOP13XX_ATUE_OIOBAR		IOP13XX_ATUE_OFFSET(0x300)
+#define IOP13XX_ATUE_OCCAR		IOP13XX_ATUE_OFFSET(0x32c)
+#define IOP13XX_ATUE_OCCDR		IOP13XX_ATUE_OFFSET(0x330)
+
+#define IOP13XX_ATUE_PIE_STS		IOP13XX_ATUE_OFFSET(0x384)
+#define IOP13XX_ATUE_PIE_MSK		IOP13XX_ATUE_OFFSET(0x388)
+
+#define IOP13XX_ATUE_ATUCR_IVM		(1 << 6)
+#define IOP13XX_ATUE_ATUCR_OUT_EN	(1 << 1)
+#define IOP13XX_ATUE_OCCAR_BUS_NUM	(24)
+#define IOP13XX_ATUE_OCCAR_DEV_NUM	(19)
+#define IOP13XX_ATUE_OCCAR_FUNC_NUM	(16)
+#define IOP13XX_ATUE_OCCAR_EXT_REG	(8)
+#define IOP13XX_ATUE_OCCAR_REG		(2)
+
+#define IOP13XX_ATUE_PCSR_BUS_NUM	(24)
+#define IOP13XX_ATUE_PCSR_DEV_NUM	(19)
+#define IOP13XX_ATUE_PCSR_FUNC_NUM	(16)
+#define IOP13XX_ATUE_PCSR_OUT_Q_BUSY	(1 << 15)
+#define IOP13XX_ATUE_PCSR_IN_Q_BUSY	(1 << 14)
+#define IOP13XX_ATUE_PCSR_END_POINT	(1 << 13)
+#define IOP13XX_ATUE_PCSR_LLRB_BUSY	(1 << 12)
+
+#define IOP13XX_ATUE_PCSR_BUS_NUM_MASK		(0xff)
+#define IOP13XX_ATUE_PCSR_DEV_NUM_MASK		(0x1f)
+#define IOP13XX_ATUE_PCSR_FUNC_NUM_MASK	(0x7)
+
+#define IOP13XX_ATUE_PCSR_CORE_RESET		(8)
+#define IOP13XX_ATUE_PCSR_FUNC_NUM		(16)
+
+#define IOP13XX_ATUE_LSTS_TRAINING		(1 << 11)
+#define IOP13XX_ATUE_STAT_SLOT_PWR_MSG		(1 << 28)
+#define IOP13XX_ATUE_STAT_PME			(1 << 27)
+#define IOP13XX_ATUE_STAT_HOT_PLUG_MSG		(1 << 26)
+#define IOP13XX_ATUE_STAT_IVM			(1 << 25)
+#define IOP13XX_ATUE_STAT_BIST			(1 << 24)
+#define IOP13XX_ATUE_STAT_CFG_WRITE		(1 << 18)
+#define IOP13XX_ATUE_STAT_VPD_ADDR		(1 << 17)
+#define IOP13XX_ATUE_STAT_POWER_TRAN		(1 << 16)
+#define IOP13XX_ATUE_STAT_HALT_ON_ERROR	(1 << 13)
+#define IOP13XX_ATUE_STAT_ROOT_SYS_ERR		(1 << 12)
+#define IOP13XX_ATUE_STAT_ROOT_ERR_MSG		(1 << 11)
+#define IOP13XX_ATUE_STAT_PCI_IFACE_ERR	(1 << 10)
+#define IOP13XX_ATUE_STAT_ERR_COR		(1 << 9	)
+#define IOP13XX_ATUE_STAT_ERR_UNCOR		(1 << 8	)
+#define IOP13XX_ATUE_STAT_CRS			(1 << 7	)
+#define IOP13XX_ATUE_STAT_LNK_DWN		(1 << 6	)
+#define IOP13XX_ATUE_STAT_INT_REC_MABORT	(1 << 5	)
+#define IOP13XX_ATUE_STAT_DET_PAR_ERR		(1 << 4	)
+#define IOP13XX_ATUE_STAT_EXT_REC_MABORT	(1 << 3	)
+#define IOP13XX_ATUE_STAT_SIG_TABORT		(1 << 2	)
+#define IOP13XX_ATUE_STAT_EXT_REC_TABORT	(1 << 1	)
+#define IOP13XX_ATUE_STAT_MASTER_DATA_PAR	(1 << 0	)
+
+#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_COMP_REQ	(1 << 31)
+#define IOP13XX_ATUE_ESTAT_REC_COMPLETER_ABORT		(1 << 30)
+#define IOP13XX_ATUE_ESTAT_TX_POISONED_TLP		(1 << 29)
+#define IOP13XX_ATUE_ESTAT_TX_PAR_ERR			(1 << 28)
+#define IOP13XX_ATUE_ESTAT_REC_UNSUPPORTED_REQ		(1 << 20)
+#define IOP13XX_ATUE_ESTAT_REC_ECRC_ERR		(1 << 19)
+#define IOP13XX_ATUE_ESTAT_REC_MALFORMED_TLP		(1 << 18)
+#define IOP13XX_ATUE_ESTAT_TX_RECEIVER_OVERFLOW	(1 << 17)
+#define IOP13XX_ATUE_ESTAT_REC_UNEXPECTED_COMP		(1 << 16)
+#define IOP13XX_ATUE_ESTAT_INT_COMP_ABORT		(1 << 15)
+#define IOP13XX_ATUE_ESTAT_COMP_TIMEOUT		(1 << 14)
+#define IOP13XX_ATUE_ESTAT_FLOW_CONTROL_ERR		(1 << 13)
+#define IOP13XX_ATUE_ESTAT_REC_POISONED_TLP		(1 << 12)
+#define IOP13XX_ATUE_ESTAT_DATA_LNK_ERR		(1 << 4	)
+#define IOP13XX_ATUE_ESTAT_TRAINING_ERR		(1 << 0	)
+
+#define IOP13XX_ATUE_IALR_DISABLE   		(0x00000001)
+#define IOP13XX_ATUE_OUMBAR_ENABLE  		(0x80000000)
+#define IOP13XX_ATU_OUMBAR_FUNC_NUM  		(28)
+#define IOP13XX_ATU_OUMBAR_FUNC_NUM_MASK  	(0x7)
+/*=======================================================================*/
+
+/*============================MESSAGING UNIT=============================*/
+#define IOP13XX_MU_OFFSET(ofs)	IOP13XX_REG_ADDR32(IOP13XX_MU_PMMR_OFFSET +\
+							(ofs))
+
+#define IOP13XX_MU_IMR0	IOP13XX_MU_OFFSET(0x10)
+#define IOP13XX_MU_IMR1	IOP13XX_MU_OFFSET(0x14)
+#define IOP13XX_MU_OMR0	IOP13XX_MU_OFFSET(0x18)
+#define IOP13XX_MU_OMR1	IOP13XX_MU_OFFSET(0x1C)
+#define IOP13XX_MU_IDR	       	IOP13XX_MU_OFFSET(0x20)
+#define IOP13XX_MU_IISR	IOP13XX_MU_OFFSET(0x24)
+#define IOP13XX_MU_IIMR	IOP13XX_MU_OFFSET(0x28)
+#define IOP13XX_MU_ODR	       	IOP13XX_MU_OFFSET(0x2C)
+#define IOP13XX_MU_OISR	IOP13XX_MU_OFFSET(0x30)
+#define IOP13XX_MU_OIMR	IOP13XX_MU_OFFSET(0x34)
+#define IOP13XX_MU_IRCSR      	IOP13XX_MU_OFFSET(0x38)
+#define IOP13XX_MU_ORCSR      	IOP13XX_MU_OFFSET(0x3C)
+#define IOP13XX_MU_MIMR	IOP13XX_MU_OFFSET(0x48)
+#define IOP13XX_MU_MUCR	IOP13XX_MU_OFFSET(0x50)
+#define IOP13XX_MU_QBAR	IOP13XX_MU_OFFSET(0x54)
+#define IOP13XX_MU_MUBAR      	IOP13XX_MU_OFFSET(0x84)
+
+#define IOP13XX_MU_WINDOW_SIZE	(8 * 1024)
+#define IOP13XX_MU_BASE_PHYS	(0xff000000)
+#define IOP13XX_MU_BASE_PCI	(0xff000000)
+#define IOP13XX_MU_MIMR_PCI	(IOP13XX_MU_BASE_PCI + 0x48)
+#define IOP13XX_MU_MIMR_CORE_SELECT (15)
+/*=======================================================================*/
+
+/*==============================ADMA UNITS===============================*/
+#define IOP13XX_ADMA_PHYS_BASE(chan)	IOP13XX_REG_ADDR32_PHYS((chan << 9))
+#define IOP13XX_ADMA_UPPER_PA(chan)	(IOP13XX_ADMA_PHYS_BASE(chan) + 0xc0)
+
+/*==============================XSI BRIDGE===============================*/
+#define IOP13XX_XBG_BECSR		IOP13XX_REG_ADDR32(0x178c)
+#define IOP13XX_XBG_BERAR		IOP13XX_REG_ADDR32(0x1790)
+#define IOP13XX_XBG_BERUAR		IOP13XX_REG_ADDR32(0x1794)
+#define is_atue_occdr_error(x) 	((__raw_readl(IOP13XX_XBG_BERAR) == \
+					IOP13XX_PMMR_VIRT_TO_PHYS(\
+					IOP13XX_ATUE_OCCDR))\
+					&& (__raw_readl(IOP13XX_XBG_BECSR) & 1))
+#define is_atux_occdr_error(x) 	((__raw_readl(IOP13XX_XBG_BERAR) == \
+					IOP13XX_PMMR_VIRT_TO_PHYS(\
+					IOP13XX_ATUX_OCCDR))\
+					&& (__raw_readl(IOP13XX_XBG_BECSR) & 1))
+/*=======================================================================*/
+
+#define IOP13XX_PBI_OFFSET(ofs) IOP13XX_REG_ADDR32(IOP13XX_PBI_PMMR_OFFSET +\
+							(ofs))
+
+#define IOP13XX_PBI_CR	       		IOP13XX_PBI_OFFSET(0x0)
+#define IOP13XX_PBI_SR	       		IOP13XX_PBI_OFFSET(0x4)
+#define IOP13XX_PBI_BAR0      		IOP13XX_PBI_OFFSET(0x8)
+#define IOP13XX_PBI_LR0       		IOP13XX_PBI_OFFSET(0xc)
+#define IOP13XX_PBI_BAR1      		IOP13XX_PBI_OFFSET(0x10)
+#define IOP13XX_PBI_LR1       		IOP13XX_PBI_OFFSET(0x14)
+
+#define IOP13XX_PROCESSOR_FREQ		IOP13XX_REG_ADDR32(0x2180)
+
+/* Watchdog timer definitions */
+#define IOP_WDTCR_EN_ARM  	0x1e1e1e1e
+#define IOP_WDTCR_EN      	0xe1e1e1e1
+#define IOP_WDTCR_DIS_ARM 	0x1f1f1f1f
+#define IOP_WDTCR_DIS     	0xf1f1f1f1
+#define IOP_RCSR_WDT		(1 << 5) /* reset caused by watchdog timer */
+#define IOP13XX_WDTSR_WRITE_EN	(1 << 31) /* used to speed up reset requests */
+#define IOP13XX_WDTCR_IB_RESET	(1 << 0)
+
+#endif /* _IOP13XX_HW_H_ */
diff --git a/arch/arm/mach-iop13xx/include/mach/iq81340.h b/arch/arm/mach-iop13xx/include/mach/iq81340.h
new file mode 100644
index 000000000000..ba2cf931e9ce
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/iq81340.h
@@ -0,0 +1,28 @@
+#ifndef _IQ81340_H_
+#define _IQ81340_H_
+
+#define IQ81340_PCE_BAR0    IOP13XX_PBI_LOWER_MEM_RA
+#define IQ81340_PCE_BAR1    (IQ81340_PCE_BAR0 + 0x02000000)
+
+#define IQ81340_FLASHBASE   IQ81340_PCE_BAR0	/* Flash */
+
+#define IQ81340_PCE_BAR1_OFFSET(a) (IQ81340_PCE_BAR1 + (a))
+
+#define IQ81340_PRD_CODE    IQ81340_PCE_BAR1_OFFSET(0)
+#define IQ81340_BRD_STEP    IQ81340_PCE_BAR1_OFFSET(0x10000)
+#define IQ81340_CPLD_REV    IQ81340_PCE_BAR1_OFFSET(0x20000)
+#define IQ81340_LED	     IQ81340_PCE_BAR1_OFFSET(0x30000)
+#define IQ81340_LHEX	     IQ81340_PCE_BAR1_OFFSET(0x40000)
+#define IQ81340_RHEX	     IQ81340_PCE_BAR1_OFFSET(0x50000)
+#define IQ81340_BUZZER	     IQ81340_PCE_BAR1_OFFSET(0x60000)
+#define IQ81340_32K_NVRAM   IQ81340_PCE_BAR1_OFFSET(0x70000)
+#define IQ81340_256K_NVRAM  IQ81340_PCE_BAR1_OFFSET(0x80000)
+#define IQ81340_ROTARY_SW   IQ81340_PCE_BAR1_OFFSET(0xd0000)
+#define IQ81340_BATT_STAT   IQ81340_PCE_BAR1_OFFSET(0xf0000)
+#define IQ81340_CMP_FLSH    IQ81340_PCE_BAR1_OFFSET(0x1000000) /* 16MB */
+
+#define PBI_CF_IDE_BASE     (IQ81340_CMP_FLSH)
+#define PBI_CF_BAR_ADDR     (IOP13XX_PBI_BAR1)
+
+
+#endif	/* _IQ81340_H_ */
diff --git a/arch/arm/mach-iop13xx/include/mach/irqs.h b/arch/arm/mach-iop13xx/include/mach/irqs.h
new file mode 100644
index 000000000000..054e7acb5bfa
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/irqs.h
@@ -0,0 +1,196 @@
+#ifndef _IOP13XX_IRQS_H_
+#define _IOP13XX_IRQS_H_
+
+#ifndef __ASSEMBLER__
+#include <linux/types.h>
+
+/* INTPND0 CP6 R0 Page 3
+ */
+static inline u32 read_intpnd_0(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c0, c3, 0":"=r" (val));
+	return val;
+}
+
+/* INTPND1 CP6 R1 Page 3
+ */
+static inline u32 read_intpnd_1(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c1, c3, 0":"=r" (val));
+	return val;
+}
+
+/* INTPND2 CP6 R2 Page 3
+ */
+static inline u32 read_intpnd_2(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c2, c3, 0":"=r" (val));
+	return val;
+}
+
+/* INTPND3 CP6 R3 Page 3
+ */
+static inline u32 read_intpnd_3(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c3, c3, 0":"=r" (val));
+	return val;
+}
+#endif
+
+#define INTBASE 0
+#define INTSIZE_4 1
+
+/*
+ * iop34x chipset interrupts
+ */
+#define IOP13XX_IRQ(x)		(IOP13XX_IRQ_OFS + (x))
+
+/*
+ * On IRQ or FIQ register
+ */
+#define IRQ_IOP13XX_ADMA0_EOT	(0)
+#define IRQ_IOP13XX_ADMA0_EOC	(1)
+#define IRQ_IOP13XX_ADMA1_EOT	(2)
+#define IRQ_IOP13XX_ADMA1_EOC	(3)
+#define IRQ_IOP13XX_ADMA2_EOT	(4)
+#define IRQ_IOP13XX_ADMA2_EOC	(5)
+#define IRQ_IOP134_WATCHDOG	(6)
+#define IRQ_IOP13XX_RSVD_7	(7)
+#define IRQ_IOP13XX_TIMER0	(8)
+#define IRQ_IOP13XX_TIMER1	(9)
+#define IRQ_IOP13XX_I2C_0	(10)
+#define IRQ_IOP13XX_I2C_1	(11)
+#define IRQ_IOP13XX_MSG	(12)
+#define IRQ_IOP13XX_MSGIBQ	(13)
+#define IRQ_IOP13XX_ATU_IM	(14)
+#define IRQ_IOP13XX_ATU_BIST	(15)
+#define IRQ_IOP13XX_PPMU	(16)
+#define IRQ_IOP13XX_COREPMU	(17)
+#define IRQ_IOP13XX_CORECACHE	(18)
+#define IRQ_IOP13XX_RSVD_19	(19)
+#define IRQ_IOP13XX_RSVD_20	(20)
+#define IRQ_IOP13XX_RSVD_21	(21)
+#define IRQ_IOP13XX_RSVD_22	(22)
+#define IRQ_IOP13XX_RSVD_23	(23)
+#define IRQ_IOP13XX_XINT0	(24)
+#define IRQ_IOP13XX_XINT1	(25)
+#define IRQ_IOP13XX_XINT2	(26)
+#define IRQ_IOP13XX_XINT3	(27)
+#define IRQ_IOP13XX_XINT4	(28)
+#define IRQ_IOP13XX_XINT5	(29)
+#define IRQ_IOP13XX_XINT6	(30)
+#define IRQ_IOP13XX_XINT7	(31)
+				      /* IINTSRC1 bit */
+#define IRQ_IOP13XX_XINT8	(32)  /* 0  */
+#define IRQ_IOP13XX_XINT9	(33)  /* 1  */
+#define IRQ_IOP13XX_XINT10	(34)  /* 2  */
+#define IRQ_IOP13XX_XINT11	(35)  /* 3  */
+#define IRQ_IOP13XX_XINT12	(36)  /* 4  */
+#define IRQ_IOP13XX_XINT13	(37)  /* 5  */
+#define IRQ_IOP13XX_XINT14	(38)  /* 6  */
+#define IRQ_IOP13XX_XINT15	(39)  /* 7  */
+#define IRQ_IOP13XX_RSVD_40	(40)  /* 8  */
+#define IRQ_IOP13XX_RSVD_41	(41)  /* 9  */
+#define IRQ_IOP13XX_RSVD_42	(42)  /* 10 */
+#define IRQ_IOP13XX_RSVD_43	(43)  /* 11 */
+#define IRQ_IOP13XX_RSVD_44	(44)  /* 12 */
+#define IRQ_IOP13XX_RSVD_45	(45)  /* 13 */
+#define IRQ_IOP13XX_RSVD_46	(46)  /* 14 */
+#define IRQ_IOP13XX_RSVD_47	(47)  /* 15 */
+#define IRQ_IOP13XX_RSVD_48	(48)  /* 16 */
+#define IRQ_IOP13XX_RSVD_49	(49)  /* 17 */
+#define IRQ_IOP13XX_RSVD_50	(50)  /* 18 */
+#define IRQ_IOP13XX_UART0	(51)  /* 19 */
+#define IRQ_IOP13XX_UART1	(52)  /* 20 */
+#define IRQ_IOP13XX_PBIE	(53)  /* 21 */
+#define IRQ_IOP13XX_ATU_CRW	(54)  /* 22 */
+#define IRQ_IOP13XX_ATU_ERR	(55)  /* 23 */
+#define IRQ_IOP13XX_MCU_ERR	(56)  /* 24 */
+#define IRQ_IOP13XX_ADMA0_ERR	(57)  /* 25 */
+#define IRQ_IOP13XX_ADMA1_ERR	(58)  /* 26 */
+#define IRQ_IOP13XX_ADMA2_ERR	(59)  /* 27 */
+#define IRQ_IOP13XX_RSVD_60	(60)  /* 28 */
+#define IRQ_IOP13XX_RSVD_61	(61)  /* 29 */
+#define IRQ_IOP13XX_MSG_ERR	(62)  /* 30 */
+#define IRQ_IOP13XX_RSVD_63	(63)  /* 31 */
+				      /* IINTSRC2 bit */
+#define IRQ_IOP13XX_INTERPROC	(64)  /* 0  */
+#define IRQ_IOP13XX_RSVD_65	(65)  /* 1  */
+#define IRQ_IOP13XX_RSVD_66	(66)  /* 2  */
+#define IRQ_IOP13XX_RSVD_67	(67)  /* 3  */
+#define IRQ_IOP13XX_RSVD_68	(68)  /* 4  */
+#define IRQ_IOP13XX_RSVD_69	(69)  /* 5  */
+#define IRQ_IOP13XX_RSVD_70	(70)  /* 6  */
+#define IRQ_IOP13XX_RSVD_71	(71)  /* 7  */
+#define IRQ_IOP13XX_RSVD_72	(72)  /* 8  */
+#define IRQ_IOP13XX_RSVD_73	(73)  /* 9  */
+#define IRQ_IOP13XX_RSVD_74	(74)  /* 10 */
+#define IRQ_IOP13XX_RSVD_75	(75)  /* 11 */
+#define IRQ_IOP13XX_RSVD_76	(76)  /* 12 */
+#define IRQ_IOP13XX_RSVD_77	(77)  /* 13 */
+#define IRQ_IOP13XX_RSVD_78	(78)  /* 14 */
+#define IRQ_IOP13XX_RSVD_79	(79)  /* 15 */
+#define IRQ_IOP13XX_RSVD_80	(80)  /* 16 */
+#define IRQ_IOP13XX_RSVD_81	(81)  /* 17 */
+#define IRQ_IOP13XX_RSVD_82	(82)  /* 18 */
+#define IRQ_IOP13XX_RSVD_83	(83)  /* 19 */
+#define IRQ_IOP13XX_RSVD_84	(84)  /* 20 */
+#define IRQ_IOP13XX_RSVD_85	(85)  /* 21 */
+#define IRQ_IOP13XX_RSVD_86	(86)  /* 22 */
+#define IRQ_IOP13XX_RSVD_87	(87)  /* 23 */
+#define IRQ_IOP13XX_RSVD_88	(88)  /* 24 */
+#define IRQ_IOP13XX_RSVD_89	(89)  /* 25 */
+#define IRQ_IOP13XX_RSVD_90	(90)  /* 26 */
+#define IRQ_IOP13XX_RSVD_91	(91)  /* 27 */
+#define IRQ_IOP13XX_RSVD_92	(92)  /* 28 */
+#define IRQ_IOP13XX_RSVD_93	(93)  /* 29 */
+#define IRQ_IOP13XX_SIB_ERR	(94)  /* 30 */
+#define IRQ_IOP13XX_SRAM_ERR	(95)  /* 31 */
+				      /* IINTSRC3 bit */
+#define IRQ_IOP13XX_I2C_2	(96)  /* 0  */
+#define IRQ_IOP13XX_ATUE_BIST	(97)  /* 1  */
+#define IRQ_IOP13XX_ATUE_CRW	(98)  /* 2  */
+#define IRQ_IOP13XX_ATUE_ERR	(99)  /* 3  */
+#define IRQ_IOP13XX_IMU	(100) /* 4  */
+#define IRQ_IOP13XX_RSVD_101	(101) /* 5  */
+#define IRQ_IOP13XX_RSVD_102	(102) /* 6  */
+#define IRQ_IOP13XX_TPMI0_OUT	(103) /* 7  */
+#define IRQ_IOP13XX_TPMI1_OUT	(104) /* 8  */
+#define IRQ_IOP13XX_TPMI2_OUT	(105) /* 9  */
+#define IRQ_IOP13XX_TPMI3_OUT	(106) /* 10 */
+#define IRQ_IOP13XX_ATUE_IMA	(107) /* 11 */
+#define IRQ_IOP13XX_ATUE_IMB	(108) /* 12 */
+#define IRQ_IOP13XX_ATUE_IMC	(109) /* 13 */
+#define IRQ_IOP13XX_ATUE_IMD	(110) /* 14 */
+#define IRQ_IOP13XX_MU_MSI_TB	(111) /* 15 */
+#define IRQ_IOP13XX_RSVD_112	(112) /* 16 */
+#define IRQ_IOP13XX_INBD_MSI	(113) /* 17 */
+#define IRQ_IOP13XX_RSVD_114	(114) /* 18 */
+#define IRQ_IOP13XX_RSVD_115	(115) /* 19 */
+#define IRQ_IOP13XX_RSVD_116	(116) /* 20 */
+#define IRQ_IOP13XX_RSVD_117	(117) /* 21 */
+#define IRQ_IOP13XX_RSVD_118	(118) /* 22 */
+#define IRQ_IOP13XX_RSVD_119	(119) /* 23 */
+#define IRQ_IOP13XX_RSVD_120	(120) /* 24 */
+#define IRQ_IOP13XX_RSVD_121	(121) /* 25 */
+#define IRQ_IOP13XX_RSVD_122	(122) /* 26 */
+#define IRQ_IOP13XX_RSVD_123	(123) /* 27 */
+#define IRQ_IOP13XX_RSVD_124	(124) /* 28 */
+#define IRQ_IOP13XX_RSVD_125	(125) /* 29 */
+#define IRQ_IOP13XX_RSVD_126	(126) /* 30 */
+#define IRQ_IOP13XX_HPI	(127) /* 31 */
+
+#ifdef CONFIG_PCI_MSI
+#define IRQ_IOP13XX_MSI_0	(IRQ_IOP13XX_HPI + 1)
+#define NR_IOP13XX_IRQS 	(IRQ_IOP13XX_MSI_0 + 128)
+#else
+#define NR_IOP13XX_IRQS	(IRQ_IOP13XX_HPI + 1)
+#endif
+
+#define NR_IRQS		NR_IOP13XX_IRQS
+
+#endif /* _IOP13XX_IRQ_H_ */
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
new file mode 100644
index 000000000000..e8b59d8f1bb9
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -0,0 +1,64 @@
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+#define TASK_SIZE  	UL(0x3f000000)
+#define PAGE_OFFSET	UL(0x40000000)
+#define TASK_UNMAPPED_BASE ((TASK_SIZE + 0x01000000) / 3)
+
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_ARCH_IOP13XX)
+#define IOP13XX_PMMR_V_START (IOP13XX_PMMR_VIRT_MEM_BASE)
+#define IOP13XX_PMMR_V_END   (IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_SIZE)
+#define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE)
+#define IOP13XX_PMMR_P_END   (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE)
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+
+/* RAM has 1:1 mapping on the PCIe/x Busses */
+#define __virt_to_bus(x)	(__virt_to_phys(x))
+#define __bus_to_virt(x)    (__phys_to_virt(x))
+
+#define virt_to_lbus(x) 					   \
+(( ((void*)(x) >= (void*)IOP13XX_PMMR_V_START) &&		   \
+((void*)(x) < (void*)IOP13XX_PMMR_V_END) ) ? 			   \
+((x) - IOP13XX_PMMR_VIRT_MEM_BASE + IOP13XX_PMMR_PHYS_MEM_BASE) : \
+((x) - PAGE_OFFSET + PHYS_OFFSET))
+
+#define lbus_to_virt(x)                                            \
+(( ((x) >= IOP13XX_PMMR_P_START) && ((x) < IOP13XX_PMMR_P_END) ) ? \
+((x) - IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_VIRT_MEM_BASE ) : \
+((x) - PHYS_OFFSET + PAGE_OFFSET))
+
+/* Device is an lbus device if it is on the platform bus of the IOP13XX */
+#define is_lbus_device(dev) (dev &&\
+			     (strncmp(dev->bus->name, "platform", 8) == 0))
+
+#define __arch_page_to_dma(dev, page)					\
+({is_lbus_device(dev) ? (dma_addr_t)virt_to_lbus(page_address(page)) : \
+(dma_addr_t)__virt_to_bus(page_address(page));})
+
+#define __arch_dma_to_virt(dev, addr) \
+({is_lbus_device(dev) ? lbus_to_virt(addr) : __bus_to_virt(addr);})
+
+#define __arch_virt_to_dma(dev, addr) \
+({is_lbus_device(dev) ? virt_to_lbus(addr) : __virt_to_bus(addr);})
+
+#endif /* CONFIG_ARCH_IOP13XX */
+#endif /* !ASSEMBLY */
+
+#define PFN_TO_NID(addr)	(0)
+
+#endif
diff --git a/arch/arm/mach-iop13xx/include/mach/msi.h b/arch/arm/mach-iop13xx/include/mach/msi.h
new file mode 100644
index 000000000000..b80c5ae17e99
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/msi.h
@@ -0,0 +1,11 @@
+#ifndef _IOP13XX_MSI_H_
+#define _IOP13XX_MSI_H_
+#ifdef CONFIG_PCI_MSI
+void iop13xx_msi_init(void);
+#else
+static inline void iop13xx_msi_init(void)
+{
+	return;
+}
+#endif
+#endif
diff --git a/arch/arm/mach-iop13xx/include/mach/pci.h b/arch/arm/mach-iop13xx/include/mach/pci.h
new file mode 100644
index 000000000000..17b5515af8b1
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/pci.h
@@ -0,0 +1,57 @@
+#ifndef _IOP13XX_PCI_H_
+#define _IOP13XX_PCI_H_
+#include <mach/irqs.h>
+#include <asm/io.h>
+
+struct pci_sys_data;
+struct hw_pci;
+int iop13xx_pci_setup(int nr, struct pci_sys_data *sys);
+struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *);
+void iop13xx_atu_select(struct hw_pci *plat_pci);
+void iop13xx_pci_init(void);
+void iop13xx_map_pci_memory(void);
+
+#define IOP_PCI_STATUS_ERROR (PCI_STATUS_PARITY |	     \
+			       PCI_STATUS_SIG_TARGET_ABORT | \
+			       PCI_STATUS_REC_TARGET_ABORT | \
+			       PCI_STATUS_REC_TARGET_ABORT | \
+			       PCI_STATUS_REC_MASTER_ABORT | \
+			       PCI_STATUS_SIG_SYSTEM_ERROR | \
+	 		       PCI_STATUS_DETECTED_PARITY)
+
+#define IOP13XX_ATUE_ATUISR_ERROR (IOP13XX_ATUE_STAT_HALT_ON_ERROR |  \
+				    IOP13XX_ATUE_STAT_ROOT_SYS_ERR |   \
+				    IOP13XX_ATUE_STAT_PCI_IFACE_ERR |  \
+				    IOP13XX_ATUE_STAT_ERR_COR |	       \
+				    IOP13XX_ATUE_STAT_ERR_UNCOR |      \
+				    IOP13XX_ATUE_STAT_CRS |	       \
+				    IOP13XX_ATUE_STAT_DET_PAR_ERR |    \
+				    IOP13XX_ATUE_STAT_EXT_REC_MABORT | \
+				    IOP13XX_ATUE_STAT_SIG_TABORT |     \
+				    IOP13XX_ATUE_STAT_EXT_REC_TABORT | \
+				    IOP13XX_ATUE_STAT_MASTER_DATA_PAR)
+
+#define IOP13XX_ATUX_ATUISR_ERROR (IOP13XX_ATUX_STAT_TX_SCEM |        \
+				    IOP13XX_ATUX_STAT_REC_SCEM |       \
+				    IOP13XX_ATUX_STAT_TX_SERR |	       \
+				    IOP13XX_ATUX_STAT_DET_PAR_ERR |    \
+				    IOP13XX_ATUX_STAT_INT_REC_MABORT | \
+				    IOP13XX_ATUX_STAT_REC_SERR |       \
+				    IOP13XX_ATUX_STAT_EXT_REC_MABORT | \
+				    IOP13XX_ATUX_STAT_EXT_REC_TABORT | \
+				    IOP13XX_ATUX_STAT_EXT_SIG_TABORT | \
+				    IOP13XX_ATUX_STAT_MASTER_DATA_PAR)
+
+/* PCI interrupts
+ */
+#define ATUX_INTA IRQ_IOP13XX_XINT0
+#define ATUX_INTB IRQ_IOP13XX_XINT1
+#define ATUX_INTC IRQ_IOP13XX_XINT2
+#define ATUX_INTD IRQ_IOP13XX_XINT3
+
+#define ATUE_INTA IRQ_IOP13XX_ATUE_IMA
+#define ATUE_INTB IRQ_IOP13XX_ATUE_IMB
+#define ATUE_INTC IRQ_IOP13XX_ATUE_IMC
+#define ATUE_INTD IRQ_IOP13XX_ATUE_IMD
+
+#endif /* _IOP13XX_PCI_H_ */
diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
new file mode 100644
index 000000000000..c7127f416e1f
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/system.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-iop13xx/include/mach/system.h
+ *
+ *  Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/iop13xx.h>
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Reset the internal bus (warning both cores are reset)
+	 */
+	write_wdtcr(IOP_WDTCR_EN_ARM);
+	write_wdtcr(IOP_WDTCR_EN);
+	write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
+	write_wdtcr(0x1000);
+
+	for(;;);
+}
diff --git a/arch/arm/mach-iop13xx/include/mach/time.h b/arch/arm/mach-iop13xx/include/mach/time.h
new file mode 100644
index 000000000000..49213d9d7cad
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/time.h
@@ -0,0 +1,107 @@
+#ifndef _IOP13XX_TIME_H_
+#define _IOP13XX_TIME_H_
+#define IRQ_IOP_TIMER0 IRQ_IOP13XX_TIMER0
+
+#define IOP_TMR_EN	    0x02
+#define IOP_TMR_RELOAD	    0x04
+#define IOP_TMR_PRIVILEGED 0x08
+#define IOP_TMR_RATIO_1_1  0x00
+
+#define IOP13XX_XSI_FREQ_RATIO_MASK	(3 << 19)
+#define IOP13XX_XSI_FREQ_RATIO_2   	(0 << 19)
+#define IOP13XX_XSI_FREQ_RATIO_3	(1 << 19)
+#define IOP13XX_XSI_FREQ_RATIO_4	(2 << 19)
+#define IOP13XX_CORE_FREQ_MASK		(7 << 16)
+#define IOP13XX_CORE_FREQ_600		(0 << 16)
+#define IOP13XX_CORE_FREQ_667		(1 << 16)
+#define IOP13XX_CORE_FREQ_800		(2 << 16)
+#define IOP13XX_CORE_FREQ_933		(3 << 16)
+#define IOP13XX_CORE_FREQ_1000		(4 << 16)
+#define IOP13XX_CORE_FREQ_1200		(5 << 16)
+
+void iop_init_time(unsigned long tickrate);
+unsigned long iop_gettimeoffset(void);
+
+static inline unsigned long iop13xx_core_freq(void)
+{
+	unsigned long freq = __raw_readl(IOP13XX_PROCESSOR_FREQ);
+	freq &= IOP13XX_CORE_FREQ_MASK;
+	switch (freq) {
+	case IOP13XX_CORE_FREQ_600:
+		return 600000000;
+	case IOP13XX_CORE_FREQ_667:
+		return 667000000;
+	case IOP13XX_CORE_FREQ_800:
+		return 800000000;
+	case IOP13XX_CORE_FREQ_933:
+		return 933000000;
+	case IOP13XX_CORE_FREQ_1000:
+		return 1000000000;
+	case IOP13XX_CORE_FREQ_1200:
+		return 1200000000;
+	default:
+		printk("%s: warning unknown frequency, defaulting to 800Mhz\n",
+			__FUNCTION__);
+	}
+
+	return 800000000;
+}
+
+static inline unsigned long iop13xx_xsi_bus_ratio(void)
+{
+	unsigned long  ratio = __raw_readl(IOP13XX_PROCESSOR_FREQ);
+	ratio &= IOP13XX_XSI_FREQ_RATIO_MASK;
+	switch (ratio) {
+	case IOP13XX_XSI_FREQ_RATIO_2:
+		return 2;
+	case IOP13XX_XSI_FREQ_RATIO_3:
+		return 3;
+	case IOP13XX_XSI_FREQ_RATIO_4:
+		return 4;
+	default:
+		printk("%s: warning unknown ratio, defaulting to 2\n",
+			__FUNCTION__);
+	}
+
+	return 2;
+}
+
+static inline void write_tmr0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val));
+}
+
+static inline void write_tmr1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c1, c9, 0" : : "r" (val));
+}
+
+static inline u32 read_tcr0(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c2, c9, 0" : "=r" (val));
+	return val;
+}
+
+static inline u32 read_tcr1(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c3, c9, 0" : "=r" (val));
+	return val;
+}
+
+static inline void write_trr0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (val));
+}
+
+static inline void write_trr1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c5, c9, 0" : : "r" (val));
+}
+
+static inline void write_tisr(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c6, c9, 0" : : "r" (val));
+}
+#endif
diff --git a/arch/arm/mach-iop13xx/include/mach/timex.h b/arch/arm/mach-iop13xx/include/mach/timex.h
new file mode 100644
index 000000000000..5b1f1c8a8270
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/timex.h
@@ -0,0 +1,3 @@
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-iop13xx/include/mach/uncompress.h b/arch/arm/mach-iop13xx/include/mach/uncompress.h
new file mode 100644
index 000000000000..fa4f80522fad
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/uncompress.h
@@ -0,0 +1,23 @@
+#include <asm/types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+#define UART_BASE ((volatile u32 *)IOP13XX_UART1_PHYS)
+#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+	while ((UART_BASE[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+	UART_BASE[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop13xx/include/mach/vmalloc.h b/arch/arm/mach-iop13xx/include/mach/vmalloc.h
new file mode 100644
index 000000000000..c53456740345
--- /dev/null
+++ b/arch/arm/mach-iop13xx/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+#ifndef _VMALLOC_H_
+#define _VMALLOC_H_
+#define VMALLOC_END 	0xfa000000UL
+#endif
diff --git a/arch/arm/mach-iop13xx/io.c b/arch/arm/mach-iop13xx/io.c
index 5b22fdeca52c..26cfa318142c 100644
--- a/arch/arm/mach-iop13xx/io.c
+++ b/arch/arm/mach-iop13xx/io.c
@@ -18,7 +18,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 void * __iomem __iop13xx_io(unsigned long io_addr)
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 77b24cd1d88d..5051c03d437c 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -18,14 +18,14 @@
  */
 #include <linux/pci.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
 #include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 extern int init_atu; /* Flag to select which ATU(s) to initialize / disable */
 
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index e8522b3b8163..bc443073a8e3 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -18,14 +18,14 @@
  */
 #include <linux/pci.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
 #include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 extern int init_atu;
 
diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
index 69f07b25b3c9..0d099ca87bdf 100644
--- a/arch/arm/mach-iop13xx/irq.c
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -23,10 +23,9 @@
 #include <asm/uaccess.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/msi.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/msi.h>
 
 /* INTCTL0 CP6 R0 Page 4
  */
diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c
index 7825c1aaa27b..673b0db22034 100644
--- a/arch/arm/mach-iop13xx/pci.c
+++ b/arch/arm/mach-iop13xx/pci.c
@@ -21,11 +21,11 @@
 #include <linux/delay.h>
 #include <linux/jiffies.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/sizes.h>
 #include <asm/signal.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/pci.h>
+#include <mach/pci.h>
 
 #define IOP13XX_PCI_DEBUG 0
 #define PRINTK(x...) ((void)(IOP13XX_PCI_DEBUG && printk(x)))
diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index 246f6d478720..b17ccc8cb471 100644
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -22,7 +22,7 @@
 #include <linux/mtd/physmap.h>
 #endif
 #include <asm/mach/map.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/hardware/iop_adma.h>
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 4877597c8758..3ad4696ade42 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -23,7 +23,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <asm/mach/arch.h>
@@ -31,7 +31,7 @@
 #include <asm/mach/pci.h>
 #include <asm/mach/time.h>
 #include <asm/mach-types.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 static void __init em7210_timer_init(void)
 {
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index d4fca75ce542..45d61276d233 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -25,7 +25,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -34,7 +34,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach-types.h>
 #include <asm/page.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * GLAN Tank timer tick configuration.
diff --git a/arch/arm/mach-iop32x/include/mach/adma.h b/arch/arm/mach-iop32x/include/mach/adma.h
new file mode 100644
index 000000000000..5ed92037dd10
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/adma.h
@@ -0,0 +1,5 @@
+#ifndef IOP32X_ADMA_H
+#define IOP32X_ADMA_H
+#include <asm/hardware/iop3xx-adma.h>
+#endif
+
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
new file mode 100644
index 000000000000..58b01664ffba
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+		.macro	addruart, rx
+		mov	\rx, #0xfe000000	@ physical as well as virtual
+		orr	\rx, \rx, #0x00800000	@ location of the UART
+		.endm
+
+#define UART_SHIFT	0
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-iop32x/include/mach/dma.h b/arch/arm/mach-iop32x/include/mach/dma.h
new file mode 100644
index 000000000000..f8bd817f205d
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/dma.h
+ *
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-iop32x/include/mach/entry-macro.S b/arch/arm/mach-iop32x/include/mach/entry-macro.S
new file mode 100644
index 000000000000..b02fb56bafcc
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/entry-macro.S
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IOP32x-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/iop32x.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro get_irqnr_preamble, base, tmp
+	mrc	p15, 0, \tmp, c15, c1, 0
+	orr	\tmp, \tmp, #(1 << 6)
+	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
+	mrc	p15, 0, \tmp, c15, c1, 0
+	mov	\tmp, \tmp
+	sub	pc, pc, #4			@ cp_wait
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	mrc     p6, 0, \irqstat, c8, c0, 0	@ Read IINTSRC
+	cmp     \irqstat, #0
+	clzne   \irqnr, \irqstat
+	rsbne   \irqnr, \irqnr, #31
+	.endm
+
+	.macro arch_ret_to_user, tmp1, tmp2
+	mrc	p15, 0, \tmp1, c15, c1, 0
+	ands	\tmp2, \tmp1, #(1 << 6)
+	bicne	\tmp1, \tmp1, #(1 << 6)
+	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
+	.endm
diff --git a/arch/arm/mach-iop32x/include/mach/glantank.h b/arch/arm/mach-iop32x/include/mach/glantank.h
new file mode 100644
index 000000000000..958eb91c0913
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/glantank.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/glantank.h
+ *
+ * IO-Data GLAN Tank board registers
+ */
+
+#ifndef __GLANTANK_H
+#define __GLANTANK_H
+
+#define GLANTANK_UART		0xfe800000	/* UART */
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/gpio.h b/arch/arm/mach-iop32x/include/mach/gpio.h
new file mode 100644
index 000000000000..708f4ec9db1d
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_IOP32X_GPIO_H
+#define __ASM_ARCH_IOP32X_GPIO_H
+
+#include <asm/hardware/iop3xx-gpio.h>
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/hardware.h b/arch/arm/mach-iop32x/include/mach/hardware.h
new file mode 100644
index 000000000000..d559c4e6095a
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/hardware.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/hardware.h
+ */
+
+#ifndef __HARDWARE_H
+#define __HARDWARE_H
+
+#include <asm/types.h>
+
+/*
+ * Note about PCI IO space mappings
+ *
+ * To make IO space accesses efficient, we store virtual addresses in
+ * the IO resources.
+ *
+ * The PCI IO space is located at virtual 0xfe000000 from physical
+ * 0x90000000. The PCI BARs must be programmed with physical addresses,
+ * but when we read them, we convert them to virtual addresses. See
+ * arch/arm/plat-iop/pci.c.
+ */
+#define pcibios_assign_all_busses() 1
+#define PCIBIOS_MIN_IO		0x00000000
+#define PCIBIOS_MIN_MEM		0x00000000
+
+#ifndef __ASSEMBLY__
+void iop32x_init_irq(void);
+#endif
+
+
+/*
+ * Generic chipset bits
+ */
+#include "iop32x.h"
+
+/*
+ * Board specific bits
+ */
+#include "glantank.h"
+#include "iq80321.h"
+#include "iq31244.h"
+#include "n2100.h"
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/io.h b/arch/arm/mach-iop32x/include/mach/io.h
new file mode 100644
index 000000000000..ce54705ba3d4
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/io.h
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IO_H
+#define __IO_H
+
+#include <mach/hardware.h>
+
+extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
+	unsigned int mtype);
+extern void __iop3xx_iounmap(void __iomem *addr);
+
+#define IO_SPACE_LIMIT		0xffffffff
+#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
+#define __mem_pci(a)		(a)
+
+#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
+#define __arch_iounmap(a)	 __iop3xx_iounmap(a)
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iop32x.h b/arch/arm/mach-iop32x/include/mach/iop32x.h
new file mode 100644
index 000000000000..abd9eb49f103
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/iop32x.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/iop32x.h
+ *
+ * Intel IOP32X Chip definitions
+ *
+ * Author: Rory Bolt <rorybolt@pacbell.net>
+ * Copyright (C) 2002 Rory Bolt
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOP32X_H
+#define __IOP32X_H
+
+/*
+ * Peripherals that are shared between the iop32x and iop33x but
+ * located at different addresses.
+ */
+#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07c4 + (reg))
+#define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07e0 + (reg))
+
+#include <asm/hardware/iop3xx.h>
+
+/* ATU Parameters
+ * set up a 1:1 bus to physical ram relationship
+ * w/ physical ram on top of pci in the memory map
+ */
+#define IOP32X_MAX_RAM_SIZE            0x40000000UL
+#define IOP3XX_MAX_RAM_SIZE            IOP32X_MAX_RAM_SIZE
+#define IOP3XX_PCI_LOWER_MEM_BA        0x80000000
+#define IOP32X_PCI_MEM_WINDOW_SIZE     0x04000000
+#define IOP3XX_PCI_MEM_WINDOW_SIZE     IOP32X_PCI_MEM_WINDOW_SIZE
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iq31244.h b/arch/arm/mach-iop32x/include/mach/iq31244.h
new file mode 100644
index 000000000000..6b6b369e781c
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/iq31244.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/iq31244.h
+ *
+ * Intel IQ31244 evaluation board registers
+ */
+
+#ifndef __IQ31244_H
+#define __IQ31244_H
+
+#define IQ31244_UART		0xfe800000	/* UART #1 */
+#define IQ31244_7SEG_1		0xfe840000	/* 7-Segment MSB */
+#define IQ31244_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
+#define IQ31244_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
+#define IQ31244_BATT_STAT	0xfe8f0000	/* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/iq80321.h b/arch/arm/mach-iop32x/include/mach/iq80321.h
new file mode 100644
index 000000000000..498819b737e7
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/iq80321.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/iq80321.h
+ *
+ * Intel IQ80321 evaluation board registers
+ */
+
+#ifndef __IQ80321_H
+#define __IQ80321_H
+
+#define IQ80321_UART		0xfe800000	/* UART #1 */
+#define IQ80321_7SEG_1		0xfe840000	/* 7-Segment MSB */
+#define IQ80321_7SEG_0		0xfe850000	/* 7-Segment LSB (WO) */
+#define IQ80321_ROTARY_SW	0xfe8d0000	/* Rotary Switch */
+#define IQ80321_BATT_STAT	0xfe8f0000	/* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/irqs.h b/arch/arm/mach-iop32x/include/mach/irqs.h
new file mode 100644
index 000000000000..33573e09914c
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/irqs.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/irqs.h
+ *
+ * Author:	Rory Bolt <rorybolt@pacbell.net>
+ * Copyright:	(C) 2002 Rory Bolt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IRQS_H
+#define __IRQS_H
+
+/*
+ * IOP80321 chipset interrupts
+ */
+#define IRQ_IOP32X_DMA0_EOT	0
+#define IRQ_IOP32X_DMA0_EOC	1
+#define IRQ_IOP32X_DMA1_EOT	2
+#define IRQ_IOP32X_DMA1_EOC	3
+#define IRQ_IOP32X_AA_EOT	6
+#define IRQ_IOP32X_AA_EOC	7
+#define IRQ_IOP32X_CORE_PMON	8
+#define IRQ_IOP32X_TIMER0	9
+#define IRQ_IOP32X_TIMER1	10
+#define IRQ_IOP32X_I2C_0	11
+#define IRQ_IOP32X_I2C_1	12
+#define IRQ_IOP32X_MESSAGING	13
+#define IRQ_IOP32X_ATU_BIST	14
+#define IRQ_IOP32X_PERFMON	15
+#define IRQ_IOP32X_CORE_PMU	16
+#define IRQ_IOP32X_BIU_ERR	17
+#define IRQ_IOP32X_ATU_ERR	18
+#define IRQ_IOP32X_MCU_ERR	19
+#define IRQ_IOP32X_DMA0_ERR	20
+#define IRQ_IOP32X_DMA1_ERR	21
+#define IRQ_IOP32X_AA_ERR	23
+#define IRQ_IOP32X_MSG_ERR	24
+#define IRQ_IOP32X_SSP		25
+#define IRQ_IOP32X_XINT0	27
+#define IRQ_IOP32X_XINT1	28
+#define IRQ_IOP32X_XINT2	29
+#define IRQ_IOP32X_XINT3	30
+#define IRQ_IOP32X_HPI		31
+
+#define NR_IRQS			32
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h
new file mode 100644
index 000000000000..42cd4bf3148c
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/memory.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/memory.h
+ */
+
+#ifndef __MEMORY_H
+#define __MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0xa0000000)
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(__virt_to_phys(x))
+#define __bus_to_virt(x)	(__phys_to_virt(x))
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/n2100.h b/arch/arm/mach-iop32x/include/mach/n2100.h
new file mode 100644
index 000000000000..40b8a532b064
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/n2100.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/n2100.h
+ *
+ * Thecus N2100 board registers
+ */
+
+#ifndef __N2100_H
+#define __N2100_H
+
+#define N2100_UART		0xfe800000	/* UART */
+
+#define N2100_COPY_BUTTON	IOP3XX_GPIO_LINE(0)
+#define N2100_PCA9532_RESET	IOP3XX_GPIO_LINE(2)
+#define N2100_RESET_BUTTON	IOP3XX_GPIO_LINE(3)
+#define N2100_HARDWARE_RESET	IOP3XX_GPIO_LINE(4)
+#define N2100_POWER_BUTTON	IOP3XX_GPIO_LINE(5)
+
+
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
new file mode 100644
index 000000000000..20f923e54f46
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/system.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/system.h
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	local_irq_disable();
+
+	if (machine_is_n2100()) {
+		gpio_line_set(N2100_HARDWARE_RESET, GPIO_LOW);
+		gpio_line_config(N2100_HARDWARE_RESET, GPIO_OUT);
+		while (1)
+			;
+	}
+
+	*IOP3XX_PCSR = 0x30;
+
+	/* Jump into ROM at address 0 */
+	cpu_reset(0);
+}
diff --git a/arch/arm/mach-iop32x/include/mach/time.h b/arch/arm/mach-iop32x/include/mach/time.h
new file mode 100644
index 000000000000..0f28c9949623
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/time.h
@@ -0,0 +1,4 @@
+#ifndef _IOP32X_TIME_H_
+#define _IOP32X_TIME_H_
+#define IRQ_IOP_TIMER0 IRQ_IOP32X_TIMER0
+#endif
diff --git a/arch/arm/mach-iop32x/include/mach/timex.h b/arch/arm/mach-iop32x/include/mach/timex.h
new file mode 100644
index 000000000000..a541afced3cb
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/timex.h
+ *
+ * IOP32x architecture timex specifications
+ */
+
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h
new file mode 100644
index 000000000000..b247551b6f5a
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/uncompress.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/uncompress.h
+ */
+
+#include <asm/types.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+static volatile u8 *uart_base;
+
+#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+	uart_base[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	if (machine_is_iq80321())
+		uart_base = (volatile u8 *)IQ80321_UART;
+	else if (machine_is_iq31244() || machine_is_em7210())
+		uart_base = (volatile u8 *)IQ31244_UART;
+	else
+		uart_base = (volatile u8 *)0xfe800000;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop32x/include/mach/vmalloc.h b/arch/arm/mach-iop32x/include/mach/vmalloc.h
new file mode 100644
index 000000000000..85ceb09d85f0
--- /dev/null
+++ b/arch/arm/mach-iop32x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-iop32x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 4a89823bcebb..082818aaa205 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -26,7 +26,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -36,7 +36,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * Until March of 2007 iq31244 platforms and ep80219 platforms shared the
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 1da3c911edd3..d735539808b4 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -23,7 +23,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -33,7 +33,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * IQ80321 timer tick configuration.
diff --git a/arch/arm/mach-iop32x/irq.c b/arch/arm/mach-iop32x/irq.c
index 55cf0162e8c1..ba59b2d17db1 100644
--- a/arch/arm/mach-iop32x/irq.c
+++ b/arch/arm/mach-iop32x/irq.c
@@ -16,7 +16,7 @@
 #include <linux/list.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static u32 iop32x_mask;
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 2741063bf361..3173f9c5835d 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -17,6 +17,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/f75375s.h>
+#include <linux/leds-pca9532.h>
 #include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
@@ -29,7 +30,7 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/reboot.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -39,7 +40,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * N2100 timer tick configuration.
@@ -206,6 +207,53 @@ static struct f75375s_platform_data n2100_f75375s = {
 	.pwm_enable = { 0, 0 },
 };
 
+static struct pca9532_platform_data n2100_leds = {
+	.leds = {
+	{	.name = "n2100:red:satafail0",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "n2100:red:satafail1",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "n2100:blue:usb",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{ 	.type = PCA9532_TYPE_NONE },
+
+	{ 	.type = PCA9532_TYPE_NONE },
+	{ 	.type = PCA9532_TYPE_NONE },
+	{ 	.type = PCA9532_TYPE_NONE },
+	{	.name = "n2100:red:usb",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+
+	{	.type = PCA9532_TYPE_NONE }, /* power OFF gpio */
+	{	.type = PCA9532_TYPE_NONE }, /* reset gpio */
+	{	.type = PCA9532_TYPE_NONE },
+	{	.type = PCA9532_TYPE_NONE },
+
+	{	.type = PCA9532_TYPE_NONE },
+	{	.name = "n2100:orange:system",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "n2100:red:system",
+		.state = PCA9532_OFF,
+		.type = PCA9532_TYPE_LED,
+	},
+	{	.name = "N2100 beeper"  ,
+		.state =  PCA9532_OFF,
+		.type = PCA9532_TYPE_N2100_BEEP,
+	},
+	},
+	.psc = { 0, 0 },
+	.pwm = { 0, 0 },
+};
+
 static struct i2c_board_info __initdata n2100_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("rs5c372b", 0x32),
@@ -214,6 +262,10 @@ static struct i2c_board_info __initdata n2100_i2c_devices[] = {
 		I2C_BOARD_INFO("f75375", 0x2e),
 		.platform_data = &n2100_f75375s,
 	},
+	{
+		I2C_BOARD_INFO("pca9532", 0x60),
+		.platform_data = &n2100_leds,
+	},
 };
 
 /*
diff --git a/arch/arm/mach-iop33x/include/mach/adma.h b/arch/arm/mach-iop33x/include/mach/adma.h
new file mode 100644
index 000000000000..4b92f795f90e
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/adma.h
@@ -0,0 +1,5 @@
+#ifndef IOP33X_ADMA_H
+#define IOP33X_ADMA_H
+#include <asm/hardware/iop3xx-adma.h>
+#endif
+
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
new file mode 100644
index 000000000000..a60c9ef05cc3
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+		.macro	addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ mmu enabled?
+		moveq	\rx, #0xff000000	@ physical
+		movne	\rx, #0xfe000000	@ virtual
+		orr	\rx, \rx, #0x00ff0000
+		orr	\rx, \rx, #0x0000f700
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-iop33x/include/mach/dma.h b/arch/arm/mach-iop33x/include/mach/dma.h
new file mode 100644
index 000000000000..d8b42232931d
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/dma.h
+ *
+ * Copyright (C) 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-iop33x/include/mach/entry-macro.S b/arch/arm/mach-iop33x/include/mach/entry-macro.S
new file mode 100644
index 000000000000..4e1f7282b354
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/entry-macro.S
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IOP33x-based platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/iop33x.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro get_irqnr_preamble, base, tmp
+	mrc	p15, 0, \tmp, c15, c1, 0
+	orr	\tmp, \tmp, #(1 << 6)
+	mcr	p15, 0, \tmp, c15, c1, 0	@ Enable cp6 access
+	mrc	p15, 0, \tmp, c15, c1, 0
+	mov	\tmp, \tmp
+	sub	pc, pc, #4			@ cp_wait
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	mrc     p6, 0, \irqstat, c14, c0, 0     @ Read IINTVEC
+	cmp     \irqstat, #0
+	mrceq   p6, 0, \irqstat, c14, c0, 0     @ erratum 63 workaround
+	adds    \irqnr, \irqstat, #1
+	movne   \irqnr, \irqstat, lsr #2
+	.endm
+
+	.macro arch_ret_to_user, tmp1, tmp2
+	mrc	p15, 0, \tmp1, c15, c1, 0
+	ands	\tmp2, \tmp1, #(1 << 6)
+	bicne	\tmp1, \tmp1, #(1 << 6)
+	mcrne	p15, 0, \tmp1, c15, c1, 0	@ Disable cp6 access
+	.endm
diff --git a/arch/arm/mach-iop33x/include/mach/gpio.h b/arch/arm/mach-iop33x/include/mach/gpio.h
new file mode 100644
index 000000000000..ddd55bba9bb9
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_IOP33X_GPIO_H
+#define __ASM_ARCH_IOP33X_GPIO_H
+
+#include <asm/hardware/iop3xx-gpio.h>
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/hardware.h b/arch/arm/mach-iop33x/include/mach/hardware.h
new file mode 100644
index 000000000000..8c10e430655e
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/hardware.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/hardware.h
+ */
+
+#ifndef __HARDWARE_H
+#define __HARDWARE_H
+
+#include <asm/types.h>
+
+/*
+ * Note about PCI IO space mappings
+ *
+ * To make IO space accesses efficient, we store virtual addresses in
+ * the IO resources.
+ *
+ * The PCI IO space is located at virtual 0xfe000000 from physical
+ * 0x90000000.  The PCI BARs must be programmed with physical addresses,
+ * but when we read them, we convert them to virtual addresses.  See
+ * arch/arm/mach-iop3xx/iop3xx-pci.c
+ */
+#define pcibios_assign_all_busses()	1
+#define PCIBIOS_MIN_IO		0x00000000
+#define PCIBIOS_MIN_MEM		0x00000000
+
+#ifndef __ASSEMBLY__
+void iop33x_init_irq(void);
+
+extern struct platform_device iop33x_uart0_device;
+extern struct platform_device iop33x_uart1_device;
+#endif
+
+
+/*
+ * Generic chipset bits
+ *
+ */
+#include "iop33x.h"
+
+/*
+ * Board specific bits
+ */
+#include "iq80331.h"
+#include "iq80332.h"
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/io.h b/arch/arm/mach-iop33x/include/mach/io.h
new file mode 100644
index 000000000000..158874631217
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/io.h
+ *
+ * Copyright (C) 2001  MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IO_H
+#define __IO_H
+
+#include <mach/hardware.h>
+
+extern void __iomem *__iop3xx_ioremap(unsigned long cookie, size_t size,
+	unsigned int mtype);
+extern void __iop3xx_iounmap(void __iomem *addr);
+
+#define IO_SPACE_LIMIT		0xffffffff
+#define __io(p)		((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
+#define __mem_pci(a)		(a)
+
+#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
+#define __arch_iounmap(a)	 __iop3xx_iounmap(a)
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h
new file mode 100644
index 000000000000..24567316ec88
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/iop33x.h
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/iop33x.h
+ *
+ * Intel IOP33X Chip definitions
+ *
+ * Author: Dave Jiang (dave.jiang@intel.com)
+ * Copyright (C) 2003, 2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOP33X_H
+#define __IOP33X_H
+
+/*
+ * Peripherals that are shared between the iop32x and iop33x but
+ * located at different addresses.
+ */
+#define IOP3XX_GPIO_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1780 + (reg))
+#define IOP3XX_TIMER_REG(reg)	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x07d0 + (reg))
+
+#include <asm/hardware/iop3xx.h>
+
+/* UARTs  */
+#define IOP33X_UART0_PHYS	(IOP3XX_PERIPHERAL_PHYS_BASE + 0x1700)
+#define IOP33X_UART0_VIRT	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1700)
+#define IOP33X_UART1_PHYS	(IOP3XX_PERIPHERAL_PHYS_BASE + 0x1740)
+#define IOP33X_UART1_VIRT	(IOP3XX_PERIPHERAL_VIRT_BASE + 0x1740)
+
+/* ATU Parameters
+ * set up a 1:1 bus to physical ram relationship
+ * w/ pci on top of physical ram in memory map
+ */
+#define IOP33X_MAX_RAM_SIZE		0x80000000UL
+#define IOP3XX_MAX_RAM_SIZE		IOP33X_MAX_RAM_SIZE
+#define IOP3XX_PCI_LOWER_MEM_BA	(PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
+#define IOP33X_PCI_MEM_WINDOW_SIZE	0x08000000
+#define IOP3XX_PCI_MEM_WINDOW_SIZE	IOP33X_PCI_MEM_WINDOW_SIZE
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iq80331.h b/arch/arm/mach-iop33x/include/mach/iq80331.h
new file mode 100644
index 000000000000..fe406b0127f7
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/iq80331.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/iq80331.h
+ *
+ * Intel IQ80331 evaluation board registers
+ */
+
+#ifndef __IQ80331_H
+#define __IQ80331_H
+
+#define IQ80331_7SEG_1		0xce840000	/* 7-Segment MSB */
+#define IQ80331_7SEG_0		0xce850000	/* 7-Segment LSB (WO) */
+#define IQ80331_ROTARY_SW	0xce8d0000	/* Rotary Switch */
+#define IQ80331_BATT_STAT	0xce8f0000	/* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/iq80332.h b/arch/arm/mach-iop33x/include/mach/iq80332.h
new file mode 100644
index 000000000000..8325d71f2ed5
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/iq80332.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/iq80332.h
+ *
+ * Intel IQ80332 evaluation board registers
+ */
+
+#ifndef __IQ80332_H
+#define __IQ80332_H
+
+#define IQ80332_7SEG_1		0xce840000	/* 7-Segment MSB */
+#define IQ80332_7SEG_0		0xce850000	/* 7-Segment LSB (WO) */
+#define IQ80332_ROTARY_SW	0xce8d0000	/* Rotary Switch */
+#define IQ80332_BATT_STAT	0xce8f0000	/* Battery Status */
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/irqs.h b/arch/arm/mach-iop33x/include/mach/irqs.h
new file mode 100644
index 000000000000..707628a600ac
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/irqs.h
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/irqs.h
+ *
+ * Author:	Dave Jiang (dave.jiang@intel.com)
+ * Copyright:	(C) 2003 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IRQS_H
+#define __IRQS_H
+
+/*
+ * IOP80331 chipset interrupts
+ */
+#define IRQ_IOP33X_DMA0_EOT	0
+#define IRQ_IOP33X_DMA0_EOC	1
+#define IRQ_IOP33X_DMA1_EOT	2
+#define IRQ_IOP33X_DMA1_EOC	3
+#define IRQ_IOP33X_AA_EOT	6
+#define IRQ_IOP33X_AA_EOC	7
+#define IRQ_IOP33X_TIMER0	8
+#define IRQ_IOP33X_TIMER1	9
+#define IRQ_IOP33X_I2C_0	10
+#define IRQ_IOP33X_I2C_1	11
+#define IRQ_IOP33X_MSG		12
+#define IRQ_IOP33X_MSGIBQ	13
+#define IRQ_IOP33X_ATU_BIST	14
+#define IRQ_IOP33X_PERFMON	15
+#define IRQ_IOP33X_CORE_PMU	16
+#define IRQ_IOP33X_XINT0	24
+#define IRQ_IOP33X_XINT1	25
+#define IRQ_IOP33X_XINT2	26
+#define IRQ_IOP33X_XINT3	27
+#define IRQ_IOP33X_XINT8	32
+#define IRQ_IOP33X_XINT9	33
+#define IRQ_IOP33X_XINT10	34
+#define IRQ_IOP33X_XINT11	35
+#define IRQ_IOP33X_XINT12	36
+#define IRQ_IOP33X_XINT13	37
+#define IRQ_IOP33X_XINT14	38
+#define IRQ_IOP33X_XINT15	39
+#define IRQ_IOP33X_UART0	51
+#define IRQ_IOP33X_UART1	52
+#define IRQ_IOP33X_PBIE		53
+#define IRQ_IOP33X_ATU_CRW	54
+#define IRQ_IOP33X_ATU_ERR	55
+#define IRQ_IOP33X_MCU_ERR	56
+#define IRQ_IOP33X_DMA0_ERR	57
+#define IRQ_IOP33X_DMA1_ERR	58
+#define IRQ_IOP33X_AA_ERR	60
+#define IRQ_IOP33X_MSG_ERR	62
+#define IRQ_IOP33X_HPI		63
+
+#define NR_IRQS			64
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h
new file mode 100644
index 000000000000..2cef0bbb354f
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/memory.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/memory.h
+ */
+
+#ifndef __MEMORY_H
+#define __MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+/*
+ * Virtual view <-> PCI DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	(__virt_to_phys(x))
+#define __bus_to_virt(x)	(__phys_to_virt(x))
+
+
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
new file mode 100644
index 000000000000..7bf3bfb49446
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/system.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/system.h
+ *
+ * Copyright (C) 2001 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	*IOP3XX_PCSR = 0x30;
+
+	/* Jump into ROM at address 0 */
+	cpu_reset(0);
+}
diff --git a/arch/arm/mach-iop33x/include/mach/time.h b/arch/arm/mach-iop33x/include/mach/time.h
new file mode 100644
index 000000000000..4ac4d7664f85
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/time.h
@@ -0,0 +1,4 @@
+#ifndef _IOP33X_TIME_H_
+#define _IOP33X_TIME_H_
+#define IRQ_IOP_TIMER0 IRQ_IOP33X_TIMER0
+#endif
diff --git a/arch/arm/mach-iop33x/include/mach/timex.h b/arch/arm/mach-iop33x/include/mach/timex.h
new file mode 100644
index 000000000000..c75760844d49
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/timex.h
+ *
+ * IOP3xx architecture timex specifications
+ */
+
+#include <mach/hardware.h>
+
+#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-iop33x/include/mach/uncompress.h b/arch/arm/mach-iop33x/include/mach/uncompress.h
new file mode 100644
index 000000000000..b42423f63302
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/uncompress.h
+ */
+
+#include <asm/types.h>
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+#include <mach/hardware.h>
+
+static volatile u32 *uart_base;
+
+#define TX_DONE		(UART_LSR_TEMT | UART_LSR_THRE)
+
+static inline void putc(char c)
+{
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+	uart_base[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	if (machine_is_iq80331() || machine_is_iq80332())
+		uart_base = (volatile u32 *)IOP33X_UART0_PHYS;
+	else
+		uart_base = (volatile u32 *)0xfe800000;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop33x/include/mach/vmalloc.h b/arch/arm/mach-iop33x/include/mach/vmalloc.h
new file mode 100644
index 000000000000..f9f99dea9bc4
--- /dev/null
+++ b/arch/arm/mach-iop33x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-iop33x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index de39fd778579..c7d99f9fafed 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -22,7 +22,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * IQ80331 timer tick configuration.
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 4904fd78445f..af616c5f4fb2 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -22,7 +22,7 @@
 #include <linux/serial_8250.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
@@ -32,7 +32,7 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 /*
  * IQ80332 timer tick configuration.
diff --git a/arch/arm/mach-iop33x/irq.c b/arch/arm/mach-iop33x/irq.c
index f09dd054b9c0..abb4ea2ed4fd 100644
--- a/arch/arm/mach-iop33x/irq.c
+++ b/arch/arm/mach-iop33x/irq.c
@@ -16,7 +16,7 @@
 #include <linux/list.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 static u32 iop33x_mask0;
diff --git a/arch/arm/mach-iop33x/uart.c b/arch/arm/mach-iop33x/uart.c
index ac297cd0276c..8c21870fa808 100644
--- a/arch/arm/mach-iop33x/uart.c
+++ b/arch/arm/mach-iop33x/uart.c
@@ -24,9 +24,8 @@
 #include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iop3xx.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #define IOP33X_UART_XTAL 33334000
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 81cdc8267206..a6a4f93085fd 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -29,7 +29,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
@@ -39,7 +39,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 static DEFINE_SPINLOCK(ixp2000_slowport_lock);
 static unsigned long ixp2000_slowport_irq_flags;
@@ -329,19 +329,19 @@ static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type)
 	/*
 	 * Then, set the proper trigger type.
 	 */
-	if (type & IRQT_FALLING)
+	if (type & IRQ_TYPE_EDGE_FALLING)
 		GPIO_IRQ_falling_edge |= 1 << line;
 	else
 		GPIO_IRQ_falling_edge &= ~(1 << line);
-	if (type & IRQT_RISING)
+	if (type & IRQ_TYPE_EDGE_RISING)
 		GPIO_IRQ_rising_edge |= 1 << line;
 	else
 		GPIO_IRQ_rising_edge &= ~(1 << line);
-	if (type & IRQT_LOW)
+	if (type & IRQ_TYPE_LEVEL_LOW)
 		GPIO_IRQ_level_low |= 1 << line;
 	else
 		GPIO_IRQ_level_low &= ~(1 << line);
-	if (type & IRQT_HIGH)
+	if (type & IRQ_TYPE_LEVEL_HIGH)
 		GPIO_IRQ_level_high |= 1 << line;
 	else
 		GPIO_IRQ_level_high &= ~(1 << line);
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 9c49435d42c3..c62ed655c1a7 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -38,7 +38,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
new file mode 100644
index 000000000000..904ff56d2246
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -0,0 +1,27 @@
+/* arch/arm/mach-ixp2000/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro  addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0xc0000000	@ Physical base
+		movne	\rx, #0xfe000000	@ virtual base
+		orrne	\rx, \rx, #0x00f00000
+		orr	\rx, \rx, #0x00030000
+#ifdef	__ARMEB__
+		orr	\rx, \rx, #0x00000003
+#endif
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp2000/include/mach/dma.h b/arch/arm/mach-ixp2000/include/mach/dma.h
new file mode 100644
index 000000000000..26063d60f622
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/dma.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/dma.h
+ *
+ * Copyright (C) 2002 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
diff --git a/arch/arm/mach-ixp2000/include/mach/enp2611.h b/arch/arm/mach-ixp2000/include/mach/enp2611.h
new file mode 100644
index 000000000000..9ce3690061d5
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/enp2611.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/enp2611.h
+ *
+ * Register and other defines for Radisys ENP-2611
+ *
+ * Created 2004 by Lennert Buytenhek from the ixdp2x01 code.  The
+ * original version carries the following notices:
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ENP2611_H
+#define __ENP2611_H
+
+#define ENP2611_CALEB_PHYS_BASE		0xc5000000
+#define ENP2611_CALEB_VIRT_BASE		0xfe000000
+#define ENP2611_CALEB_SIZE		0x00100000
+
+#define ENP2611_PM3386_0_PHYS_BASE	0xc6000000
+#define ENP2611_PM3386_0_VIRT_BASE	0xfe100000
+#define ENP2611_PM3386_0_SIZE		0x00100000
+
+#define ENP2611_PM3386_1_PHYS_BASE	0xc6400000
+#define ENP2611_PM3386_1_VIRT_BASE	0xfe200000
+#define ENP2611_PM3386_1_SIZE		0x00100000
+
+#define ENP2611_GPIO_SCL		7
+#define ENP2611_GPIO_SDA		6
+
+#define IRQ_ENP2611_THERMAL		IRQ_IXP2000_GPIO4
+#define IRQ_ENP2611_OPTION_BOARD	IRQ_IXP2000_GPIO3
+#define IRQ_ENP2611_CALEB		IRQ_IXP2000_GPIO2
+#define IRQ_ENP2611_PM3386_1		IRQ_IXP2000_GPIO1
+#define IRQ_ENP2611_PM3386_0		IRQ_IXP2000_GPIO0
+
+
+#endif
diff --git a/arch/arm/mach-ixp2000/include/mach/entry-macro.S b/arch/arm/mach-ixp2000/include/mach/entry-macro.S
new file mode 100644
index 000000000000..5850ffc8c751
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/entry-macro.S
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IXP2000-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/irqs.h>
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		mov	\irqnr, #0x0              @clear out irqnr as default
+                mov	\base, #0xfe000000
+		orr	\base, \base, #0x00e00000
+		orr	\base, \base, #0x08
+		ldr	\irqstat, [\base]         @ get interrupts
+
+		cmp	\irqstat, #0
+		beq	1001f
+
+		clz     \irqnr, \irqstat
+		mov     \base, #31
+		subs    \irqnr, \base, \irqnr
+
+		/*
+		 * We handle PCIA and PCIB here so we don't have an
+		 * extra layer of code just to check these two bits.
+		 */
+		cmp	\irqnr, #IRQ_IXP2000_PCI
+		bne	1001f
+
+		mov	\base, #0xfe000000
+		orr	\base, \base, #0x00c00000
+		orr	\base, \base, #0x00000100
+		orr	\base, \base, #0x00000058
+		ldr	\irqstat, [\base]
+
+		mov	\tmp, #(1<<26)
+		tst	\irqstat, \tmp
+		movne	\irqnr, #IRQ_IXP2000_PCIA
+		bne	1001f
+
+		mov	\tmp, #(1<<27)
+		tst	\irqstat, \tmp
+		movne	\irqnr, #IRQ_IXP2000_PCIB
+
+1001:
+		.endm
+
diff --git a/arch/arm/mach-ixp2000/include/mach/gpio.h b/arch/arm/mach-ixp2000/include/mach/gpio.h
new file mode 100644
index 000000000000..4a88d2c33dac
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/gpio.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/gpio.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software, you can redistribute it and/or modify 
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * IXP2000 GPIO in/out, edge/level detection for IRQs:
+ * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
+ * or both Falling-edge and Rising-edge.  
+ * This must be called *before* the corresponding IRQ is registerd.
+ * Use this instead of directly setting the GPIO registers.
+ * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
+ */
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#ifndef __ASSEMBLY__
+
+#define GPIO_IN				0
+#define GPIO_OUT			1
+
+#define IXP2000_GPIO_LOW		0
+#define IXP2000_GPIO_HIGH		1
+
+extern void gpio_line_config(int line, int direction);
+
+static inline int gpio_line_get(int line)
+{
+	return (((*IXP2000_GPIO_PLR) >> line) & 1);
+}
+
+static inline void gpio_line_set(int line, int value)
+{
+	if (value == IXP2000_GPIO_HIGH) {
+		ixp2000_reg_write(IXP2000_GPIO_POSR, 1 << line);
+	} else if (value == IXP2000_GPIO_LOW) {
+		ixp2000_reg_write(IXP2000_GPIO_POCR, 1 << line);
+	}
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* ASM_ARCH_IXP2000_GPIO_H_ */
diff --git a/arch/arm/mach-ixp2000/include/mach/hardware.h b/arch/arm/mach-ixp2000/include/mach/hardware.h
new file mode 100644
index 000000000000..f033de4e7493
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/hardware.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/hardware.h
+ *
+ * Hardware definitions for IXP2400/2800 based systems
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ *
+ * Maintainer: Deepak Saxena <dsaxena@mvista.com>
+ *
+ * Copyright (C) 2001-2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#define __ASM_ARCH_HARDWARE_H__
+
+/*
+ * This needs to be platform-specific?
+ */
+#define PCIBIOS_MIN_IO          0x00000000
+#define PCIBIOS_MIN_MEM         0x00000000
+
+#include "ixp2000-regs.h"	/* Chipset Registers */
+
+#define pcibios_assign_all_busses() 0
+
+/*
+ * Platform helper functions
+ */
+#include "platform.h"
+
+/*
+ * Platform-specific bits
+ */
+#include "enp2611.h"		/* ENP-2611 */
+#include "ixdp2x00.h"		/* IXDP2400/2800 */
+#include "ixdp2x01.h"		/* IXDP2401/2801 */
+
+#endif  /* _ASM_ARCH_HARDWARE_H__ */
diff --git a/arch/arm/mach-ixp2000/include/mach/io.h b/arch/arm/mach-ixp2000/include/mach/io.h
new file mode 100644
index 000000000000..859e584914d9
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/io.h
@@ -0,0 +1,134 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/io.h
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002  Intel Corp.
+ * Copyrgiht (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT		0xffffffff
+#define __mem_pci(a)		(a)
+
+/*
+ * The A? revisions of the IXP2000s assert byte lanes for PCI I/O
+ * transactions the other way round (MEM transactions don't have this
+ * issue), so if we want to support those models, we need to override
+ * the standard I/O functions.
+ *
+ * B0 and later have a bit that can be set to 1 to get the proper
+ * behavior for I/O transactions, which then allows us to use the
+ * standard I/O functions.  This is what we do if the user does not
+ * explicitly ask for support for pre-B0.
+ */
+#ifdef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO
+#define ___io(p)		((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
+
+#define alignb(addr)		(void __iomem *)((unsigned long)(addr) ^ 3)
+#define alignw(addr)		(void __iomem *)((unsigned long)(addr) ^ 2)
+
+#define outb(v,p)		__raw_writeb((v),alignb(___io(p)))
+#define outw(v,p)		__raw_writew((v),alignw(___io(p)))
+#define outl(v,p)		__raw_writel((v),___io(p))
+
+#define inb(p)		({ unsigned int __v = __raw_readb(alignb(___io(p))); __v; })
+#define inw(p)		\
+	({ unsigned int __v = (__raw_readw(alignw(___io(p)))); __v; })
+#define inl(p)		\
+	({ unsigned int __v = (__raw_readl(___io(p))); __v; })
+
+#define outsb(p,d,l)		__raw_writesb(alignb(___io(p)),d,l)
+#define outsw(p,d,l)		__raw_writesw(alignw(___io(p)),d,l)
+#define outsl(p,d,l)		__raw_writesl(___io(p),d,l)
+
+#define insb(p,d,l)		__raw_readsb(alignb(___io(p)),d,l)
+#define insw(p,d,l)		__raw_readsw(alignw(___io(p)),d,l)
+#define insl(p,d,l)		__raw_readsl(___io(p),d,l)
+
+#define __is_io_address(p)	((((unsigned long)(p)) & ~(IXP2000_PCI_IO_SIZE - 1)) == IXP2000_PCI_IO_VIRT_BASE)
+
+#define ioread8(p)						\
+	({							\
+		unsigned int __v;				\
+								\
+		if (__is_io_address(p)) {			\
+			__v = __raw_readb(alignb(p));		\
+		} else {					\
+			__v = __raw_readb(p);			\
+		}						\
+								\
+		__v;						\
+	})							\
+
+#define ioread16(p)						\
+	({							\
+		unsigned int __v;				\
+								\
+		if (__is_io_address(p)) {			\
+			__v = __raw_readw(alignw(p));		\
+		} else {					\
+			__v = le16_to_cpu(__raw_readw(p));	\
+		}						\
+								\
+		__v;						\
+	})
+
+#define ioread32(p)						\
+	({							\
+		unsigned int __v;				\
+								\
+		if (__is_io_address(p)) {			\
+			__v = __raw_readl(p);			\
+		} else {					\
+			__v = le32_to_cpu(__raw_readl(p));	\
+		}						\
+								\
+		 __v;						\
+	})
+
+#define iowrite8(v,p)						\
+	({							\
+		if (__is_io_address(p)) {			\
+			__raw_writeb((v), alignb(p));		\
+		} else {					\
+			__raw_writeb((v), p);			\
+		}						\
+	})
+
+#define iowrite16(v,p)						\
+	({							\
+		if (__is_io_address(p)) {			\
+			__raw_writew((v), alignw(p));		\
+		} else {					\
+			__raw_writew(cpu_to_le16(v), p);	\
+		}						\
+	})
+
+#define iowrite32(v,p)						\
+	({							\
+		if (__is_io_address(p)) {			\
+			__raw_writel((v), p);			\
+		} else {					\
+			__raw_writel(cpu_to_le32(v), p);	\
+		}						\
+	})
+
+#define ioport_map(port, nr)	___io(port)
+
+#define ioport_unmap(addr)
+#else
+#define __io(p)			((void __iomem *)((p)+IXP2000_PCI_IO_VIRT_BASE))
+#endif
+
+
+#endif
diff --git a/arch/arm/mach-ixp2000/include/mach/irqs.h b/arch/arm/mach-ixp2000/include/mach/irqs.h
new file mode 100644
index 000000000000..bee96bcafdca
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/irqs.h
@@ -0,0 +1,207 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/irqs.h
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _IRQS_H
+#define _IRQS_H
+
+/*
+ * Do NOT add #ifdef MACHINE_FOO in here.
+ * Simpy add your machine IRQs here and increase NR_IRQS if needed to
+ * hold your machine's IRQ table.
+ */
+
+/*
+ * Some interrupt numbers go unused b/c the IRQ mask/ummask/status
+ * register has those bit reserved. We just mark those interrupts
+ * as invalid and this allows us to do mask/unmask with a single
+ * shift operation instead of having to map the IRQ number to
+ * a HW IRQ number.
+ */
+#define	IRQ_IXP2000_SOFT_INT		0 /* soft interrupt */
+#define	IRQ_IXP2000_ERRSUM		1 /* OR of all bits in ErrorStatus reg*/
+#define	IRQ_IXP2000_UART		2
+#define	IRQ_IXP2000_GPIO		3
+#define	IRQ_IXP2000_TIMER1     		4
+#define	IRQ_IXP2000_TIMER2     		5
+#define	IRQ_IXP2000_TIMER3     		6
+#define	IRQ_IXP2000_TIMER4     		7
+#define	IRQ_IXP2000_PMU        		8               
+#define	IRQ_IXP2000_SPF        		9  /* Slow port framer IRQ */
+#define	IRQ_IXP2000_DMA1      		10
+#define	IRQ_IXP2000_DMA2      		11
+#define	IRQ_IXP2000_DMA3      		12
+#define	IRQ_IXP2000_PCI_DOORBELL	13
+#define	IRQ_IXP2000_ME_ATTN       	14 
+#define	IRQ_IXP2000_PCI   		15 /* PCI INTA or INTB */
+#define	IRQ_IXP2000_THDA0   		16 /* thread 0-31A */
+#define	IRQ_IXP2000_THDA1  		17 /* thread 32-63A, IXP2800 only */
+#define	IRQ_IXP2000_THDA2		18 /* thread 64-95A */
+#define	IRQ_IXP2000_THDA3 		19 /* thread 96-127A, IXP2800 only */
+#define	IRQ_IXP2000_THDB0		24 /* thread 0-31B */
+#define	IRQ_IXP2000_THDB1		25 /* thread 32-63B, IXP2800 only */
+#define	IRQ_IXP2000_THDB2		26 /* thread 64-95B */
+#define	IRQ_IXP2000_THDB3		27 /* thread 96-127B, IXP2800 only */
+
+/* define generic GPIOs */
+#define IRQ_IXP2000_GPIO0		32
+#define IRQ_IXP2000_GPIO1		33
+#define IRQ_IXP2000_GPIO2		34
+#define IRQ_IXP2000_GPIO3		35
+#define IRQ_IXP2000_GPIO4		36
+#define IRQ_IXP2000_GPIO5		37
+#define IRQ_IXP2000_GPIO6		38
+#define IRQ_IXP2000_GPIO7		39
+
+/* split off the 2 PCI sources */
+#define IRQ_IXP2000_PCIA		40
+#define IRQ_IXP2000_PCIB		41
+
+/* Int sources from IRQ_ERROR_STATUS */
+#define IRQ_IXP2000_DRAM0_MIN_ERR	42
+#define IRQ_IXP2000_DRAM0_MAJ_ERR	43
+#define IRQ_IXP2000_DRAM1_MIN_ERR	44
+#define IRQ_IXP2000_DRAM1_MAJ_ERR	45
+#define IRQ_IXP2000_DRAM2_MIN_ERR	46
+#define IRQ_IXP2000_DRAM2_MAJ_ERR	47
+/* 48-57 reserved */
+#define IRQ_IXP2000_SRAM0_ERR		58
+#define IRQ_IXP2000_SRAM1_ERR		59
+#define IRQ_IXP2000_SRAM2_ERR		60
+#define IRQ_IXP2000_SRAM3_ERR		61
+/* 62-65 reserved */
+#define IRQ_IXP2000_MEDIA_ERR		66
+#define IRQ_IXP2000_PCI_ERR			67
+#define IRQ_IXP2000_SP_INT			68
+
+#define NR_IXP2000_IRQS				69
+
+#define	IXP2000_BOARD_IRQ(x)		(NR_IXP2000_IRQS + (x))
+
+#define	IXP2000_BOARD_IRQ_MASK(irq)	(1 << (irq - NR_IXP2000_IRQS))	
+
+#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))
+#define IXP2000_VALID_ERR_IRQ_MASK (\
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT)	)
+
+/*
+ * This allows for all the on-chip sources plus up to 32 CPLD based
+ * IRQs. Should be more than enough.
+ */
+#define	IXP2000_BOARD_IRQS		32
+#define NR_IRQS				(NR_IXP2000_IRQS + IXP2000_BOARD_IRQS)
+
+
+/* 
+ * IXDP2400 specific IRQs
+ */
+#define	IRQ_IXDP2400_INGRESS_NPU	IXP2000_BOARD_IRQ(0) 
+#define	IRQ_IXDP2400_ENET		IXP2000_BOARD_IRQ(1) 
+#define	IRQ_IXDP2400_MEDIA_PCI		IXP2000_BOARD_IRQ(2) 
+#define	IRQ_IXDP2400_MEDIA_SP		IXP2000_BOARD_IRQ(3) 
+#define	IRQ_IXDP2400_SF_PCI		IXP2000_BOARD_IRQ(4) 
+#define	IRQ_IXDP2400_SF_SP		IXP2000_BOARD_IRQ(5) 
+#define	IRQ_IXDP2400_PMC		IXP2000_BOARD_IRQ(6) 
+#define	IRQ_IXDP2400_TVM		IXP2000_BOARD_IRQ(7) 
+
+#define	NR_IXDP2400_IRQS		((IRQ_IXDP2400_TVM)+1)  
+#define	IXDP2400_NR_IRQS		NR_IXDP2400_IRQS - NR_IXP2000_IRQS
+
+/* IXDP2800 specific IRQs */
+#define IRQ_IXDP2800_EGRESS_ENET	IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2800_INGRESS_NPU	IXP2000_BOARD_IRQ(1)
+#define IRQ_IXDP2800_PMC		IXP2000_BOARD_IRQ(2)
+#define IRQ_IXDP2800_FABRIC_PCI		IXP2000_BOARD_IRQ(3)
+#define IRQ_IXDP2800_FABRIC		IXP2000_BOARD_IRQ(4)
+#define IRQ_IXDP2800_MEDIA		IXP2000_BOARD_IRQ(5)
+
+#define	NR_IXDP2800_IRQS		((IRQ_IXDP2800_MEDIA)+1)
+#define	IXDP2800_NR_IRQS		NR_IXDP2800_IRQS - NR_IXP2000_IRQS
+
+/* 
+ * IRQs on both IXDP2x01 boards
+ */
+#define IRQ_IXDP2X01_SPCI_DB_0		IXP2000_BOARD_IRQ(2)
+#define IRQ_IXDP2X01_SPCI_DB_1		IXP2000_BOARD_IRQ(3)
+#define IRQ_IXDP2X01_SPCI_PMC_INTA	IXP2000_BOARD_IRQ(4)
+#define IRQ_IXDP2X01_SPCI_PMC_INTB	IXP2000_BOARD_IRQ(5)
+#define IRQ_IXDP2X01_SPCI_PMC_INTC	IXP2000_BOARD_IRQ(6)
+#define IRQ_IXDP2X01_SPCI_PMC_INTD	IXP2000_BOARD_IRQ(7)
+#define IRQ_IXDP2X01_SPCI_FIC_INT	IXP2000_BOARD_IRQ(8)
+#define IRQ_IXDP2X01_IPMI_FROM		IXP2000_BOARD_IRQ(16)
+#define IRQ_IXDP2X01_125US		IXP2000_BOARD_IRQ(17)
+#define IRQ_IXDP2X01_DB_0_ADD		IXP2000_BOARD_IRQ(18)
+#define IRQ_IXDP2X01_DB_1_ADD		IXP2000_BOARD_IRQ(19)
+#define IRQ_IXDP2X01_UART1		IXP2000_BOARD_IRQ(21)
+#define IRQ_IXDP2X01_UART2		IXP2000_BOARD_IRQ(22)
+#define IRQ_IXDP2X01_FIC_ADD_INT	IXP2000_BOARD_IRQ(24)
+#define IRQ_IXDP2X01_CS8900		IXP2000_BOARD_IRQ(25)
+#define IRQ_IXDP2X01_BBSRAM		IXP2000_BOARD_IRQ(26)
+
+#define IXDP2X01_VALID_IRQ_MASK ( \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_0) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_DB_1) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTA) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTB) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTC) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_PMC_INTD) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_SPCI_FIC_INT) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_IPMI_FROM) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_125US) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_0_ADD) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_DB_1_ADD) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART1) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_UART2) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_FIC_ADD_INT) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_CS8900) | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2X01_BBSRAM) )
+
+/* 
+ * IXDP2401 specific IRQs
+ */
+#define IRQ_IXDP2401_INTA_82546		IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2401_INTB_82546		IXP2000_BOARD_IRQ(1)
+
+#define	IXDP2401_VALID_IRQ_MASK ( \
+		IXDP2X01_VALID_IRQ_MASK | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTA_82546) |\
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2401_INTB_82546))
+
+/*
+ * IXDP2801-specific IRQs
+ */
+#define IRQ_IXDP2801_RIV		IXP2000_BOARD_IRQ(0)
+#define IRQ_IXDP2801_CNFG_MEDIA		IXP2000_BOARD_IRQ(27)
+#define IRQ_IXDP2801_CLOCK_REF		IXP2000_BOARD_IRQ(28)
+
+#define	IXDP2801_VALID_IRQ_MASK ( \
+		IXDP2X01_VALID_IRQ_MASK | \
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_RIV) |\
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CNFG_MEDIA) |\
+		IXP2000_BOARD_IRQ_MASK(IRQ_IXDP2801_CLOCK_REF))
+
+#define	NR_IXDP2X01_IRQS		((IRQ_IXDP2801_CLOCK_REF) + 1)
+
+#endif /*_IRQS_H*/
diff --git a/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
new file mode 100644
index 000000000000..5df8479d9481
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/ixdp2x00.h
+ *
+ * Register and other defines for IXDP2[48]00 platforms
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef _IXDP2X00_H_
+#define _IXDP2X00_H_
+
+/*
+ * On board CPLD memory map
+ */
+#define IXDP2X00_PHYS_CPLD_BASE		0xc7000000
+#define IXDP2X00_VIRT_CPLD_BASE		0xfe000000
+#define IXDP2X00_CPLD_SIZE		0x00100000
+
+
+#define IXDP2X00_CPLD_REG(x)  	\
+	(volatile unsigned long *)(IXDP2X00_VIRT_CPLD_BASE | x)
+
+/*
+ * IXDP2400 CPLD registers
+ */
+#define IXDP2400_CPLD_SYSLED		IXDP2X00_CPLD_REG(0x0)  
+#define IXDP2400_CPLD_DISP_DATA		IXDP2X00_CPLD_REG(0x4)
+#define IXDP2400_CPLD_CLOCK_SPEED	IXDP2X00_CPLD_REG(0x8)
+#define IXDP2400_CPLD_INT_STAT		IXDP2X00_CPLD_REG(0xc)
+#define IXDP2400_CPLD_REV		IXDP2X00_CPLD_REG(0x10)
+#define IXDP2400_CPLD_SYS_CLK_M		IXDP2X00_CPLD_REG(0x14)
+#define IXDP2400_CPLD_SYS_CLK_N		IXDP2X00_CPLD_REG(0x18)
+#define IXDP2400_CPLD_INT_MASK		IXDP2X00_CPLD_REG(0x48)
+
+/*
+ * IXDP2800 CPLD registers
+ */
+#define IXDP2800_CPLD_INT_STAT		IXDP2X00_CPLD_REG(0x0)
+#define IXDP2800_CPLD_INT_MASK		IXDP2X00_CPLD_REG(0x140)
+
+
+#define	IXDP2X00_GPIO_I2C_ENABLE	0x02
+#define	IXDP2X00_GPIO_SCL		0x07
+#define	IXDP2X00_GPIO_SDA		0x06
+
+/*
+ * PCI devfns for on-board devices. We need these to be able to
+ * properly translate IRQs and for device removal.
+ */
+#define	IXDP2400_SLAVE_ENET_DEVFN	0x18	/* Bus 1 */
+#define	IXDP2400_MASTER_ENET_DEVFN	0x20	/* Bus 1 */
+#define	IXDP2400_MEDIA_DEVFN		0x28	/* Bus 1 */
+#define	IXDP2400_SWITCH_FABRIC_DEVFN	0x30	/* Bus 1 */
+
+#define	IXDP2800_SLAVE_ENET_DEVFN	0x20	/* Bus 1 */
+#define	IXDP2800_MASTER_ENET_DEVFN	0x18	/* Bus 1 */
+#define	IXDP2800_SWITCH_FABRIC_DEVFN	0x30	/* Bus 1 */
+
+#define	IXDP2X00_P2P_DEVFN		0x20	/* Bus 0 */
+#define	IXDP2X00_21555_DEVFN		0x30	/* Bus 0 */
+#define IXDP2X00_SLAVE_NPU_DEVFN	0x28	/* Bus 1 */
+#define	IXDP2X00_PMC_DEVFN		0x38	/* Bus 1 */
+#define IXDP2X00_MASTER_NPU_DEVFN	0x38	/* Bus 1 */
+
+#ifndef __ASSEMBLY__
+/*
+ * The master NPU is always PCI master.
+ */
+static inline unsigned int ixdp2x00_master_npu(void)
+{
+	return !!ixp2000_is_pcimaster();
+}
+
+/*
+ * Helper functions used by ixdp2400 and ixdp2800 specific code
+ */
+void ixdp2x00_init_irq(volatile unsigned long*, volatile unsigned long *, unsigned long);
+void ixdp2x00_slave_pci_postinit(void);
+void ixdp2x00_init_machine(void);
+void ixdp2x00_map_io(void);
+
+#endif
+
+#endif /*_IXDP2X00_H_ */
diff --git a/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h b/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
new file mode 100644
index 000000000000..4c1f04083e54
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/ixdp2x01.h
+ *
+ * Platform definitions for IXDP2X01 && IXDP2801 systems
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista Software, Inc. 
+ *
+ * Based on original code Copyright (c) 2002-2003 Intel Corporation
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __IXDP2X01_H__
+#define __IXDP2X01_H__
+
+#define	IXDP2X01_PHYS_CPLD_BASE		0xc6024000
+#define	IXDP2X01_VIRT_CPLD_BASE		0xfe000000
+#define	IXDP2X01_CPLD_REGION_SIZE	0x00100000
+
+#define IXDP2X01_CPLD_VIRT_REG(reg) (volatile unsigned long*)(IXDP2X01_VIRT_CPLD_BASE | reg)
+#define IXDP2X01_CPLD_PHYS_REG(reg) (IXDP2X01_PHYS_CPLD_BASE | reg)
+
+#define IXDP2X01_UART1_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x40)
+#define IXDP2X01_UART1_PHYS_BASE	IXDP2X01_CPLD_PHYS_REG(0x40)
+
+#define IXDP2X01_UART2_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x60)
+#define IXDP2X01_UART2_PHYS_BASE	IXDP2X01_CPLD_PHYS_REG(0x60)
+
+#define IXDP2X01_CS8900_VIRT_BASE	IXDP2X01_CPLD_VIRT_REG(0x80)
+#define IXDP2X01_CS8900_VIRT_END	(IXDP2X01_CS8900_VIRT_BASE + 16)
+
+#define IXDP2X01_CPLD_RESET_REG         IXDP2X01_CPLD_VIRT_REG(0x00)
+#define IXDP2X01_INT_MASK_SET_REG	IXDP2X01_CPLD_VIRT_REG(0x08)
+#define IXDP2X01_INT_STAT_REG		IXDP2X01_CPLD_VIRT_REG(0x0C)
+#define IXDP2X01_INT_RAW_REG		IXDP2X01_CPLD_VIRT_REG(0x10) 
+#define IXDP2X01_INT_MASK_CLR_REG	IXDP2X01_INT_RAW_REG
+#define IXDP2X01_INT_SIM_REG		IXDP2X01_CPLD_VIRT_REG(0x14)
+
+#define IXDP2X01_CPLD_FLASH_REG		IXDP2X01_CPLD_VIRT_REG(0x20)
+
+#define IXDP2X01_CPLD_FLASH_INTERN 	0x8000
+#define IXDP2X01_CPLD_FLASH_BANK_MASK 	0xF
+#define IXDP2X01_FLASH_WINDOW_BITS 	25
+#define IXDP2X01_FLASH_WINDOW_SIZE 	(1 << IXDP2X01_FLASH_WINDOW_BITS)
+#define IXDP2X01_FLASH_WINDOW_MASK 	(IXDP2X01_FLASH_WINDOW_SIZE - 1)
+
+#define	IXDP2X01_UART_CLK		1843200
+
+#define	IXDP2X01_GPIO_I2C_ENABLE	0x02
+#define	IXDP2X01_GPIO_SCL		0x07
+#define	IXDP2X01_GPIO_SDA		0x06
+
+#endif /* __IXDP2x01_H__ */
diff --git a/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
new file mode 100644
index 000000000000..19d80379a3e3
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
@@ -0,0 +1,457 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/ixp2000-regs.h
+ *
+ * Chipset register definitions for IXP2400/2800 based systems.
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef _IXP2000_REGS_H_
+#define _IXP2000_REGS_H_
+
+/*
+ * IXP2000 linux memory map:
+ *
+ * virt		phys		size
+ * fb000000	db000000	16M		PCI CFG1
+ * fc000000	da000000	16M		PCI CFG0
+ * fd000000	d8000000	16M		PCI I/O
+ * fe[0-7]00000			8M		per-platform mappings
+ * fe900000	80000000	1M		SRAM #0 (first MB)
+ * fea00000	cb400000	1M		SCRATCH ring get/put
+ * feb00000	c8000000	1M		MSF
+ * fec00000	df000000	1M		PCI CSRs
+ * fed00000	de000000	1M		PCI CREG
+ * fee00000	d6000000	1M		INTCTL
+ * fef00000	c0000000	1M		CAP
+ */
+
+/* 
+ * Static I/O regions.
+ *
+ * Most of the registers are clumped in 4K regions spread throughout
+ * the 0xc0000000 -> 0xc0100000 address range, but we just map in
+ * the whole range using a single 1 MB section instead of small
+ * 4K pages.  This has two advantages for us:
+ *
+ * 1) We use only one TLB entry for large number of on-chip I/O devices.
+ *
+ * 2) We can easily set the Section attributes to XCB=101 on the IXP2400
+ *    as required per erratum #66.  We accomplish this by using a
+ *    new MT_IXP2000_DEVICE memory type with the bits set as required.
+ *
+ * CAP stands for CSR Access Proxy.
+ *
+ * If you change the virtual address of this mapping, please propagate
+ * the change to arch/arm/kernel/debug.S, which hardcodes the virtual
+ * address of the UART located in this region.
+ */
+
+#define	IXP2000_CAP_PHYS_BASE		0xc0000000
+#define	IXP2000_CAP_VIRT_BASE		0xfef00000
+#define	IXP2000_CAP_SIZE		0x00100000
+
+/*
+ * Addresses for specific on-chip peripherals.
+ */
+#define	IXP2000_SLOWPORT_CSR_VIRT_BASE	0xfef80000
+#define	IXP2000_GLOBAL_REG_VIRT_BASE	0xfef04000
+#define	IXP2000_UART_PHYS_BASE		0xc0030000
+#define	IXP2000_UART_VIRT_BASE		0xfef30000
+#define	IXP2000_TIMER_VIRT_BASE		0xfef20000
+#define	IXP2000_UENGINE_CSR_VIRT_BASE	0xfef18000
+#define	IXP2000_GPIO_VIRT_BASE		0xfef10000
+
+/*
+ * Devices outside of the 0xc0000000 -> 0xc0100000 range.  The virtual
+ * addresses of the INTCTL and PCI_CSR mappings are hardcoded in
+ * entry-macro.S, so if you ever change these please propagate
+ * the change.
+ */
+#define IXP2000_INTCTL_PHYS_BASE	0xd6000000
+#define	IXP2000_INTCTL_VIRT_BASE	0xfee00000
+#define	IXP2000_INTCTL_SIZE		0x00100000
+
+#define IXP2000_PCI_CREG_PHYS_BASE	0xde000000
+#define	IXP2000_PCI_CREG_VIRT_BASE	0xfed00000
+#define	IXP2000_PCI_CREG_SIZE		0x00100000
+
+#define IXP2000_PCI_CSR_PHYS_BASE	0xdf000000
+#define	IXP2000_PCI_CSR_VIRT_BASE	0xfec00000
+#define	IXP2000_PCI_CSR_SIZE		0x00100000
+
+#define IXP2000_MSF_PHYS_BASE		0xc8000000
+#define IXP2000_MSF_VIRT_BASE		0xfeb00000
+#define IXP2000_MSF_SIZE		0x00100000
+
+#define IXP2000_SCRATCH_RING_PHYS_BASE	0xcb400000
+#define IXP2000_SCRATCH_RING_VIRT_BASE	0xfea00000
+#define IXP2000_SCRATCH_RING_SIZE	0x00100000
+
+#define IXP2000_SRAM0_PHYS_BASE		0x80000000
+#define IXP2000_SRAM0_VIRT_BASE		0xfe900000
+#define IXP2000_SRAM0_SIZE		0x00100000
+
+#define IXP2000_PCI_IO_PHYS_BASE	0xd8000000
+#define	IXP2000_PCI_IO_VIRT_BASE	0xfd000000
+#define IXP2000_PCI_IO_SIZE     	0x01000000
+
+#define IXP2000_PCI_CFG0_PHYS_BASE	0xda000000
+#define IXP2000_PCI_CFG0_VIRT_BASE	0xfc000000
+#define IXP2000_PCI_CFG0_SIZE   	0x01000000
+
+#define IXP2000_PCI_CFG1_PHYS_BASE	0xdb000000
+#define IXP2000_PCI_CFG1_VIRT_BASE	0xfb000000
+#define IXP2000_PCI_CFG1_SIZE		0x01000000
+
+/* 
+ * Timers
+ */
+#define	IXP2000_TIMER_REG(x)		((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x)))
+/* Timer control */
+#define	IXP2000_T1_CTL			IXP2000_TIMER_REG(0x00)
+#define	IXP2000_T2_CTL			IXP2000_TIMER_REG(0x04)
+#define	IXP2000_T3_CTL			IXP2000_TIMER_REG(0x08)
+#define	IXP2000_T4_CTL			IXP2000_TIMER_REG(0x0c)
+/* Store initial value */
+#define	IXP2000_T1_CLD			IXP2000_TIMER_REG(0x10)
+#define	IXP2000_T2_CLD			IXP2000_TIMER_REG(0x14)
+#define	IXP2000_T3_CLD			IXP2000_TIMER_REG(0x18)
+#define	IXP2000_T4_CLD			IXP2000_TIMER_REG(0x1c)
+/* Read current value */
+#define	IXP2000_T1_CSR			IXP2000_TIMER_REG(0x20)
+#define	IXP2000_T2_CSR			IXP2000_TIMER_REG(0x24)
+#define	IXP2000_T3_CSR			IXP2000_TIMER_REG(0x28)
+#define	IXP2000_T4_CSR			IXP2000_TIMER_REG(0x2c)
+/* Clear associated timer interrupt */
+#define	IXP2000_T1_CLR			IXP2000_TIMER_REG(0x30)
+#define	IXP2000_T2_CLR			IXP2000_TIMER_REG(0x34)
+#define	IXP2000_T3_CLR			IXP2000_TIMER_REG(0x38)
+#define	IXP2000_T4_CLR			IXP2000_TIMER_REG(0x3c)
+/* Timer watchdog enable for T4 */
+#define	IXP2000_TWDE			IXP2000_TIMER_REG(0x40)
+
+#define	WDT_ENABLE			0x00000001
+#define	TIMER_DIVIDER_256		0x00000008
+#define	TIMER_ENABLE			0x00000080
+#define	IRQ_MASK_TIMER1         	(1 << 4)
+
+/*
+ * Interrupt controller registers
+ */
+#define IXP2000_INTCTL_REG(x)		(volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x))
+#define IXP2000_IRQ_STATUS		IXP2000_INTCTL_REG(0x08)
+#define IXP2000_IRQ_ENABLE		IXP2000_INTCTL_REG(0x10)
+#define IXP2000_IRQ_ENABLE_SET		IXP2000_INTCTL_REG(0x10)
+#define IXP2000_IRQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x18)
+#define IXP2000_FIQ_ENABLE_CLR		IXP2000_INTCTL_REG(0x14)
+#define IXP2000_IRQ_ERR_STATUS		IXP2000_INTCTL_REG(0x24)
+#define IXP2000_IRQ_ERR_ENABLE_SET	IXP2000_INTCTL_REG(0x2c)
+#define IXP2000_FIQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x30)
+#define IXP2000_IRQ_ERR_ENABLE_CLR	IXP2000_INTCTL_REG(0x34)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_0	IXP2000_INTCTL_REG(0x60)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_1	IXP2000_INTCTL_REG(0x64)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_2	IXP2000_INTCTL_REG(0x68)
+#define IXP2000_IRQ_THD_RAW_STATUS_A_3	IXP2000_INTCTL_REG(0x6c)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_0	IXP2000_INTCTL_REG(0x80)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_1	IXP2000_INTCTL_REG(0x84)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_2	IXP2000_INTCTL_REG(0x88)
+#define IXP2000_IRQ_THD_RAW_STATUS_B_3	IXP2000_INTCTL_REG(0x8c)
+#define IXP2000_IRQ_THD_STATUS_A_0	IXP2000_INTCTL_REG(0xe0)
+#define IXP2000_IRQ_THD_STATUS_A_1	IXP2000_INTCTL_REG(0xe4)
+#define IXP2000_IRQ_THD_STATUS_A_2	IXP2000_INTCTL_REG(0xe8)
+#define IXP2000_IRQ_THD_STATUS_A_3	IXP2000_INTCTL_REG(0xec)
+#define IXP2000_IRQ_THD_STATUS_B_0	IXP2000_INTCTL_REG(0x100)
+#define IXP2000_IRQ_THD_STATUS_B_1	IXP2000_INTCTL_REG(0x104)
+#define IXP2000_IRQ_THD_STATUS_B_2	IXP2000_INTCTL_REG(0x108)
+#define IXP2000_IRQ_THD_STATUS_B_3	IXP2000_INTCTL_REG(0x10c)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_0	IXP2000_INTCTL_REG(0x160)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_1	IXP2000_INTCTL_REG(0x164)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_2	IXP2000_INTCTL_REG(0x168)
+#define IXP2000_IRQ_THD_ENABLE_SET_A_3	IXP2000_INTCTL_REG(0x16c)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_0	IXP2000_INTCTL_REG(0x180)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_1	IXP2000_INTCTL_REG(0x184)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_2	IXP2000_INTCTL_REG(0x188)
+#define IXP2000_IRQ_THD_ENABLE_SET_B_3	IXP2000_INTCTL_REG(0x18c)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0	IXP2000_INTCTL_REG(0x1e0)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1	IXP2000_INTCTL_REG(0x1e4)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2	IXP2000_INTCTL_REG(0x1e8)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3	IXP2000_INTCTL_REG(0x1ec)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0	IXP2000_INTCTL_REG(0x200)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1	IXP2000_INTCTL_REG(0x204)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2	IXP2000_INTCTL_REG(0x208)
+#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3	IXP2000_INTCTL_REG(0x20c)
+
+/*
+ * Mask of valid IRQs in the 32-bit IRQ register. We use
+ * this to mark certain IRQs as being invalid.
+ */
+#define	IXP2000_VALID_IRQ_MASK	0x0f0fffff
+
+/*
+ * PCI config register access from core
+ */
+#define IXP2000_PCI_CREG(x)		(volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x))
+#define IXP2000_PCI_CMDSTAT 		IXP2000_PCI_CREG(0x04)
+#define IXP2000_PCI_CSR_BAR		IXP2000_PCI_CREG(0x10)
+#define IXP2000_PCI_SRAM_BAR		IXP2000_PCI_CREG(0x14)
+#define IXP2000_PCI_SDRAM_BAR		IXP2000_PCI_CREG(0x18)
+
+/*
+ * PCI CSRs
+ */
+#define IXP2000_PCI_CSR(x)		(volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x))
+
+/*
+ * PCI outbound interrupts
+ */
+#define IXP2000_PCI_OUT_INT_STATUS	IXP2000_PCI_CSR(0x30)
+#define IXP2000_PCI_OUT_INT_MASK	IXP2000_PCI_CSR(0x34)
+/*
+ * PCI communications
+ */
+#define IXP2000_PCI_MAILBOX0		IXP2000_PCI_CSR(0x50)
+#define IXP2000_PCI_MAILBOX1		IXP2000_PCI_CSR(0x54)
+#define IXP2000_PCI_MAILBOX2		IXP2000_PCI_CSR(0x58)
+#define IXP2000_PCI_MAILBOX3		IXP2000_PCI_CSR(0x5C)
+#define IXP2000_XSCALE_DOORBELL		IXP2000_PCI_CSR(0x60)
+#define IXP2000_XSCALE_DOORBELL_SETUP	IXP2000_PCI_CSR(0x64)
+#define IXP2000_PCI_DOORBELL		IXP2000_PCI_CSR(0x70)
+#define IXP2000_PCI_DOORBELL_SETUP	IXP2000_PCI_CSR(0x74)
+
+/*
+ * DMA engines
+ */
+#define IXP2000_PCI_CH1_BYTE_CNT	IXP2000_PCI_CSR(0x80)
+#define IXP2000_PCI_CH1_ADDR		IXP2000_PCI_CSR(0x84)
+#define IXP2000_PCI_CH1_DRAM_ADDR	IXP2000_PCI_CSR(0x88)
+#define IXP2000_PCI_CH1_DESC_PTR	IXP2000_PCI_CSR(0x8C)
+#define IXP2000_PCI_CH1_CNTRL		IXP2000_PCI_CSR(0x90)
+#define IXP2000_PCI_CH1_ME_PARAM	IXP2000_PCI_CSR(0x94)
+#define IXP2000_PCI_CH2_BYTE_CNT	IXP2000_PCI_CSR(0xA0)
+#define IXP2000_PCI_CH2_ADDR		IXP2000_PCI_CSR(0xA4)
+#define IXP2000_PCI_CH2_DRAM_ADDR	IXP2000_PCI_CSR(0xA8)
+#define IXP2000_PCI_CH2_DESC_PTR	IXP2000_PCI_CSR(0xAC)
+#define IXP2000_PCI_CH2_CNTRL		IXP2000_PCI_CSR(0xB0)
+#define IXP2000_PCI_CH2_ME_PARAM	IXP2000_PCI_CSR(0xB4)
+#define IXP2000_PCI_CH3_BYTE_CNT	IXP2000_PCI_CSR(0xC0)
+#define IXP2000_PCI_CH3_ADDR		IXP2000_PCI_CSR(0xC4)
+#define IXP2000_PCI_CH3_DRAM_ADDR	IXP2000_PCI_CSR(0xC8)
+#define IXP2000_PCI_CH3_DESC_PTR	IXP2000_PCI_CSR(0xCC)
+#define IXP2000_PCI_CH3_CNTRL		IXP2000_PCI_CSR(0xD0)
+#define IXP2000_PCI_CH3_ME_PARAM	IXP2000_PCI_CSR(0xD4)
+#define IXP2000_DMA_INF_MODE		IXP2000_PCI_CSR(0xE0)
+/*
+ * Size masks for BARs
+ */
+#define IXP2000_PCI_SRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0xFC)
+#define IXP2000_PCI_DRAM_BASE_ADDR_MASK	IXP2000_PCI_CSR(0x100)
+/*
+ * Control and uEngine related
+ */
+#define IXP2000_PCI_CONTROL		IXP2000_PCI_CSR(0x13C)
+#define IXP2000_PCI_ADDR_EXT		IXP2000_PCI_CSR(0x140)
+#define IXP2000_PCI_ME_PUSH_STATUS	IXP2000_PCI_CSR(0x148)
+#define IXP2000_PCI_ME_PUSH_EN		IXP2000_PCI_CSR(0x14C)
+#define IXP2000_PCI_ERR_STATUS		IXP2000_PCI_CSR(0x150)
+#define IXP2000_PCI_ERR_ENABLE		IXP2000_PCI_CSR(0x154)
+/*
+ * Inbound PCI interrupt control
+ */
+#define IXP2000_PCI_XSCALE_INT_STATUS	IXP2000_PCI_CSR(0x158)
+#define IXP2000_PCI_XSCALE_INT_ENABLE	IXP2000_PCI_CSR(0x15C)
+
+#define IXP2000_PCICNTL_PNR		(1<<17)	/* PCI not Reset bit of PCI_CONTROL */
+#define IXP2000_PCICNTL_PCF		(1<<28)	/* PCI Central function bit */
+#define IXP2000_XSCALE_INT		(1<<1)	/* Interrupt from XScale to PCI */
+
+/* These are from the IRQ register in the PCI ISR register */
+#define PCI_CONTROL_BE_DEO		(1 << 22)	/* Big Endian Data Enable Out */
+#define PCI_CONTROL_BE_DEI		(1 << 21)	/* Big Endian Data Enable In  */
+#define PCI_CONTROL_BE_BEO		(1 << 20)	/* Big Endian Byte Enable Out */
+#define PCI_CONTROL_BE_BEI		(1 << 19)	/* Big Endian Byte Enable In  */
+#define PCI_CONTROL_IEE			(1 << 17)	/* I/O cycle Endian swap Enable */
+
+#define IXP2000_PCI_RST_REL		(1 << 2)
+#define CFG_RST_DIR			(*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF)
+#define CFG_PCI_BOOT_HOST		(1 << 2)
+#define CFG_BOOT_PROM			(1 << 1)
+
+/*
+ * SlowPort CSRs
+ *
+ * The slowport is used to access things like flash, SONET framer control
+ * ports, slave microprocessors, CPLDs, and others of chip memory mapped
+ * peripherals.
+ */
+#define	SLOWPORT_CSR(x)		(volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x))
+
+#define	IXP2000_SLOWPORT_CCR		SLOWPORT_CSR(0x00)
+#define	IXP2000_SLOWPORT_WTC1		SLOWPORT_CSR(0x04)
+#define	IXP2000_SLOWPORT_WTC2		SLOWPORT_CSR(0x08)
+#define	IXP2000_SLOWPORT_RTC1		SLOWPORT_CSR(0x0c)
+#define	IXP2000_SLOWPORT_RTC2		SLOWPORT_CSR(0x10)
+#define	IXP2000_SLOWPORT_FSR		SLOWPORT_CSR(0x14)
+#define	IXP2000_SLOWPORT_PCR		SLOWPORT_CSR(0x18)
+#define	IXP2000_SLOWPORT_ADC		SLOWPORT_CSR(0x1C)
+#define	IXP2000_SLOWPORT_FAC		SLOWPORT_CSR(0x20)
+#define	IXP2000_SLOWPORT_FRM		SLOWPORT_CSR(0x24)
+#define	IXP2000_SLOWPORT_FIN		SLOWPORT_CSR(0x28)
+
+/*
+ * CCR values.  
+ * The CCR configures the clock division for the slowport interface.
+ */
+#define	SLOWPORT_CCR_DIV_1		0x00
+#define	SLOWPORT_CCR_DIV_2		0x01
+#define	SLOWPORT_CCR_DIV_4		0x02
+#define	SLOWPORT_CCR_DIV_6		0x03
+#define	SLOWPORT_CCR_DIV_8		0x04
+#define	SLOWPORT_CCR_DIV_10		0x05
+#define	SLOWPORT_CCR_DIV_12		0x06
+#define	SLOWPORT_CCR_DIV_14		0x07
+#define	SLOWPORT_CCR_DIV_16		0x08
+#define	SLOWPORT_CCR_DIV_18		0x09
+#define	SLOWPORT_CCR_DIV_20		0x0a
+#define	SLOWPORT_CCR_DIV_22		0x0b
+#define	SLOWPORT_CCR_DIV_24		0x0c
+#define	SLOWPORT_CCR_DIV_26		0x0d
+#define	SLOWPORT_CCR_DIV_28		0x0e
+#define	SLOWPORT_CCR_DIV_30		0x0f
+
+/*
+ * PCR values.  PCR configure the mode of the interface.
+ */
+#define	SLOWPORT_MODE_FLASH		0x00
+#define	SLOWPORT_MODE_LUCENT		0x01
+#define	SLOWPORT_MODE_PMC_SIERRA	0x02
+#define	SLOWPORT_MODE_INTEL_UP		0x03
+#define	SLOWPORT_MODE_MOTOROLA_UP	0x04
+
+/*
+ * ADC values.  Defines data and address bus widths.
+ */
+#define	SLOWPORT_ADDR_WIDTH_8		0x00
+#define	SLOWPORT_ADDR_WIDTH_16		0x01
+#define	SLOWPORT_ADDR_WIDTH_24		0x02
+#define	SLOWPORT_ADDR_WIDTH_32		0x03
+#define	SLOWPORT_DATA_WIDTH_8		0x00
+#define	SLOWPORT_DATA_WIDTH_16		0x10
+#define	SLOWPORT_DATA_WIDTH_24		0x20
+#define	SLOWPORT_DATA_WIDTH_32		0x30
+
+/*
+ * Masks and shifts for various fields in the WTC and RTC registers.
+ */
+#define	SLOWPORT_WRTC_MASK_HD		0x0003
+#define	SLOWPORT_WRTC_MASK_PW		0x003c
+#define	SLOWPORT_WRTC_MASK_SU		0x03c0
+
+#define	SLOWPORT_WRTC_SHIFT_HD		0x00
+#define	SLOWPORT_WRTC_SHIFT_SU		0x02
+#define	SLOWPORT_WRTC_SHFIT_PW		0x06
+
+
+/*
+ * GPIO registers & GPIO interface.
+ */
+#define IXP2000_GPIO_REG(x)		((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x)))
+#define IXP2000_GPIO_PLR		IXP2000_GPIO_REG(0x00)
+#define IXP2000_GPIO_PDPR		IXP2000_GPIO_REG(0x04)
+#define IXP2000_GPIO_PDSR		IXP2000_GPIO_REG(0x08)
+#define IXP2000_GPIO_PDCR		IXP2000_GPIO_REG(0x0c)
+#define IXP2000_GPIO_POPR		IXP2000_GPIO_REG(0x10)
+#define IXP2000_GPIO_POSR		IXP2000_GPIO_REG(0x14)
+#define IXP2000_GPIO_POCR		IXP2000_GPIO_REG(0x18)
+#define IXP2000_GPIO_REDR		IXP2000_GPIO_REG(0x1c)
+#define IXP2000_GPIO_FEDR		IXP2000_GPIO_REG(0x20)
+#define IXP2000_GPIO_EDSR		IXP2000_GPIO_REG(0x24)
+#define IXP2000_GPIO_LSHR		IXP2000_GPIO_REG(0x28)
+#define IXP2000_GPIO_LSLR		IXP2000_GPIO_REG(0x2c)
+#define IXP2000_GPIO_LDSR		IXP2000_GPIO_REG(0x30)
+#define IXP2000_GPIO_INER		IXP2000_GPIO_REG(0x34)
+#define IXP2000_GPIO_INSR		IXP2000_GPIO_REG(0x38)
+#define IXP2000_GPIO_INCR		IXP2000_GPIO_REG(0x3c)
+#define IXP2000_GPIO_INST		IXP2000_GPIO_REG(0x40)
+
+/*
+ * "Global" registers...whatever that's supposed to mean.
+ */
+#define GLOBAL_REG_BASE			(IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00)
+#define GLOBAL_REG(x)			(volatile unsigned long*)(GLOBAL_REG_BASE | (x))
+
+#define IXP2000_MAJ_PROD_TYPE_MASK	0x001F0000
+#define IXP2000_MAJ_PROD_TYPE_IXP2000	0x00000000
+#define IXP2000_MIN_PROD_TYPE_MASK 	0x0000FF00
+#define IXP2000_MIN_PROD_TYPE_IXP2400	0x00000200
+#define IXP2000_MIN_PROD_TYPE_IXP2850	0x00000100
+#define IXP2000_MIN_PROD_TYPE_IXP2800	0x00000000
+#define IXP2000_MAJ_REV_MASK	      	0x000000F0
+#define IXP2000_MIN_REV_MASK	      	0x0000000F
+#define IXP2000_PROD_ID_MASK		0xFFFFFFFF
+
+#define IXP2000_PRODUCT_ID		GLOBAL_REG(0x00)
+#define IXP2000_MISC_CONTROL		GLOBAL_REG(0x04)
+#define IXP2000_MSF_CLK_CNTRL  		GLOBAL_REG(0x08)
+#define IXP2000_RESET0      		GLOBAL_REG(0x0c)
+#define IXP2000_RESET1      		GLOBAL_REG(0x10)
+#define IXP2000_CCR            		GLOBAL_REG(0x14)
+#define	IXP2000_STRAP_OPTIONS  		GLOBAL_REG(0x18)
+
+#define	RSTALL				(1 << 16)
+#define	WDT_RESET_ENABLE		0x01000000
+
+
+/*
+ * MSF registers.  The IXP2400 and IXP2800 have somewhat different MSF
+ * units, but the registers that differ between the two don't overlap,
+ * so we can have one register list for both.
+ */
+#define IXP2000_MSF_REG(x)			((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x)))
+#define IXP2000_MSF_RX_CONTROL			IXP2000_MSF_REG(0x0000)
+#define IXP2000_MSF_TX_CONTROL			IXP2000_MSF_REG(0x0004)
+#define IXP2000_MSF_INTERRUPT_STATUS		IXP2000_MSF_REG(0x0008)
+#define IXP2000_MSF_INTERRUPT_ENABLE		IXP2000_MSF_REG(0x000c)
+#define IXP2000_MSF_CSIX_TYPE_MAP		IXP2000_MSF_REG(0x0010)
+#define IXP2000_MSF_FC_EGRESS_STATUS		IXP2000_MSF_REG(0x0014)
+#define IXP2000_MSF_FC_INGRESS_STATUS		IXP2000_MSF_REG(0x0018)
+#define IXP2000_MSF_HWM_CONTROL			IXP2000_MSF_REG(0x0024)
+#define IXP2000_MSF_FC_STATUS_OVERRIDE		IXP2000_MSF_REG(0x0028)
+#define IXP2000_MSF_CLOCK_CONTROL		IXP2000_MSF_REG(0x002c)
+#define IXP2000_MSF_RX_PORT_MAP			IXP2000_MSF_REG(0x0040)
+#define IXP2000_MSF_RBUF_ELEMENT_DONE		IXP2000_MSF_REG(0x0044)
+#define IXP2000_MSF_RX_MPHY_POLL_LIMIT		IXP2000_MSF_REG(0x0048)
+#define IXP2000_MSF_RX_CALENDAR_LENGTH		IXP2000_MSF_REG(0x0048)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0	IXP2000_MSF_REG(0x0050)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1	IXP2000_MSF_REG(0x0054)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2	IXP2000_MSF_REG(0x0058)
+#define IXP2000_MSF_TX_SEQUENCE_0		IXP2000_MSF_REG(0x0060)
+#define IXP2000_MSF_TX_SEQUENCE_1		IXP2000_MSF_REG(0x0064)
+#define IXP2000_MSF_TX_SEQUENCE_2		IXP2000_MSF_REG(0x0068)
+#define IXP2000_MSF_TX_MPHY_POLL_LIMIT		IXP2000_MSF_REG(0x0070)
+#define IXP2000_MSF_TX_CALENDAR_LENGTH		IXP2000_MSF_REG(0x0070)
+#define IXP2000_MSF_RX_UP_CONTROL_0		IXP2000_MSF_REG(0x0080)
+#define IXP2000_MSF_RX_UP_CONTROL_1		IXP2000_MSF_REG(0x0084)
+#define IXP2000_MSF_RX_UP_CONTROL_2		IXP2000_MSF_REG(0x0088)
+#define IXP2000_MSF_RX_UP_CONTROL_3		IXP2000_MSF_REG(0x008c)
+#define IXP2000_MSF_TX_UP_CONTROL_0		IXP2000_MSF_REG(0x0090)
+#define IXP2000_MSF_TX_UP_CONTROL_1		IXP2000_MSF_REG(0x0094)
+#define IXP2000_MSF_TX_UP_CONTROL_2		IXP2000_MSF_REG(0x0098)
+#define IXP2000_MSF_TX_UP_CONTROL_3		IXP2000_MSF_REG(0x009c)
+#define IXP2000_MSF_TRAIN_DATA			IXP2000_MSF_REG(0x00a0)
+#define IXP2000_MSF_TRAIN_CALENDAR		IXP2000_MSF_REG(0x00a4)
+#define IXP2000_MSF_TRAIN_FLOW_CONTROL		IXP2000_MSF_REG(0x00a8)
+#define IXP2000_MSF_TX_CALENDAR_0		IXP2000_MSF_REG(0x1000)
+#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS	IXP2000_MSF_REG(0x1400)
+
+
+#endif				/* _IXP2000_H_ */
diff --git a/arch/arm/mach-ixp2000/include/mach/memory.h b/arch/arm/mach-ixp2000/include/mach/memory.h
new file mode 100644
index 000000000000..241529a7c52d
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/memory.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/memory.h
+ *
+ * Copyright (c) 2002 Intel Corp.
+ * Copyright (c) 2003-2004 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x00000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#include <mach/ixp2000-regs.h>
+
+#define __virt_to_bus(v) \
+	(((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)))
+
+#define __bus_to_virt(b) \
+	__phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0)))
+
+#endif
+
diff --git a/arch/arm/mach-ixp2000/include/mach/platform.h b/arch/arm/mach-ixp2000/include/mach/platform.h
new file mode 100644
index 000000000000..42182c79ed90
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/platform.h
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/platform.h
+ *
+ * Various bits of code used by platform-level code.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long ixp2000_reg_read(volatile void *reg)
+{
+	return *((volatile unsigned long *)reg);
+}
+
+static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
+{
+	*((volatile unsigned long *)reg) = val;
+}
+
+/*
+ * On the IXP2400, we can't use XCB=000 due to chip bugs.  We use
+ * XCB=101 instead, but that makes all I/O accesses bufferable.  This
+ * is not a problem in general, but we do have to be slightly more
+ * careful because I/O writes are no longer automatically flushed out
+ * of the write buffer.
+ *
+ * In cases where we want to make sure that a write has been flushed
+ * out of the write buffer before we proceed, for example when masking
+ * a device interrupt before re-enabling IRQs in CPSR, we can use this
+ * function, ixp2000_reg_wrb, which performs a write, a readback, and
+ * issues a dummy instruction dependent on the value of the readback
+ * (mov rX, rX) to make sure that the readback has completed before we
+ * continue.
+ */
+static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
+{
+	unsigned long dummy;
+
+	*((volatile unsigned long *)reg) = val;
+
+	dummy = *((volatile unsigned long *)reg);
+	__asm__ __volatile__("mov %0, %0" : "+r" (dummy));
+}
+
+/*
+ * Boards may multiplex different devices on the 2nd channel of 
+ * the slowport interface that each need different configuration 
+ * settings.  For example, the IXDP2400 uses channel 2 on the interface 
+ * to access the CPLD, the switch fabric card, and the media card.  Each
+ * one needs a different mode so drivers must save/restore the mode 
+ * before and after each operation.  
+ *
+ * acquire_slowport(&your_config);
+ * ...
+ * do slowport operations
+ * ...
+ * release_slowport();
+ *
+ * Note that while you have the slowport, you are holding a spinlock,
+ * so your code should be written as if you explicitly acquired a lock.
+ *
+ * The configuration only affects device 2 on the slowport, so the
+ * MTD map driver does not acquire/release the slowport.  
+ */
+struct slowport_cfg {
+	unsigned long CCR;	/* Clock divide */
+	unsigned long WTC;	/* Write Timing Control */
+	unsigned long RTC;	/* Read Timing Control */
+	unsigned long PCR;	/* Protocol Control Register */
+	unsigned long ADC;	/* Address/Data Width Control */
+};
+
+
+void ixp2000_acquire_slowport(struct slowport_cfg *, struct slowport_cfg *);
+void ixp2000_release_slowport(struct slowport_cfg *);
+
+/*
+ * IXP2400 A0/A1 and  IXP2800 A0/A1/A2 have broken slowport that requires
+ * tweaking of addresses in the MTD driver.
+ */
+static inline unsigned ixp2000_has_broken_slowport(void)
+{
+	unsigned long id = *IXP2000_PRODUCT_ID;
+	unsigned long id_prod = id & (IXP2000_MAJ_PROD_TYPE_MASK |
+				      IXP2000_MIN_PROD_TYPE_MASK);
+	return (((id_prod ==
+		  /* fixed in IXP2400-B0 */
+		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+		   IXP2000_MIN_PROD_TYPE_IXP2400)) &&
+		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
+		((id_prod ==
+		  /* fixed in IXP2800-B0 */
+		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+		   IXP2000_MIN_PROD_TYPE_IXP2800)) &&
+		 ((id & IXP2000_MAJ_REV_MASK) == 0)) ||
+		((id_prod ==
+		  /* fixed in IXP2850-B0 */
+		  (IXP2000_MAJ_PROD_TYPE_IXP2000 |
+		   IXP2000_MIN_PROD_TYPE_IXP2850)) &&
+		 ((id & IXP2000_MAJ_REV_MASK) == 0)));
+}
+
+static inline unsigned int ixp2000_has_flash(void)
+{
+	return ((*IXP2000_STRAP_OPTIONS) & (CFG_BOOT_PROM));
+}
+
+static inline unsigned int ixp2000_is_pcimaster(void)
+{
+	return ((*IXP2000_STRAP_OPTIONS) & (CFG_PCI_BOOT_HOST));
+}
+
+void ixp2000_map_io(void);
+void ixp2000_uart_init(void);
+void ixp2000_init_irq(void);
+void ixp2000_init_time(unsigned long);
+unsigned long ixp2000_gettimeoffset(void);
+
+struct pci_sys_data;
+
+u32 *ixp2000_pci_config_addr(unsigned int bus, unsigned int devfn, int where);
+void ixp2000_pci_preinit(void);
+int ixp2000_pci_setup(int, struct pci_sys_data*);
+struct pci_bus* ixp2000_pci_scan_bus(int, struct pci_sys_data*);
+int ixp2000_pci_read_config(struct pci_bus*, unsigned int, int, int, u32 *);
+int ixp2000_pci_write_config(struct pci_bus*, unsigned int, int, int, u32);
+
+/*
+ * Several of the IXP2000 systems have banked flash so we need to extend the
+ * flash_platform_data structure with some private pointers
+ */
+struct ixp2000_flash_data {
+	struct flash_platform_data *platform_data;
+	int nr_banks;
+	unsigned long (*bank_setup)(unsigned long);
+};
+
+struct ixp2000_i2c_pins {
+	unsigned long sda_pin;
+	unsigned long scl_pin;
+};
+
+
+#endif /*  !__ASSEMBLY__ */
diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
new file mode 100644
index 000000000000..2e9c68f95a24
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/system.h
+ *
+ * Copyright (C) 2002 Intel Corp.
+ * Copyricht (C) 2003-2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	local_irq_disable();
+
+	/*
+	 * Reset flash banking register so that we are pointing at
+	 * RedBoot bank.
+	 */
+	if (machine_is_ixdp2401()) {
+		ixp2000_reg_write(IXDP2X01_CPLD_FLASH_REG,
+					((0 >> IXDP2X01_FLASH_WINDOW_BITS)
+						| IXDP2X01_CPLD_FLASH_INTERN));
+		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0xffffffff);
+	}
+
+	/*
+	 * On IXDP2801 we need to write this magic sequence to the CPLD
+	 * to cause a complete reset of the CPU and all external devices
+	 * and move the flash bank register back to 0.
+	 */
+	if (machine_is_ixdp2801() || machine_is_ixdp28x5()) {
+		unsigned long reset_reg = *IXDP2X01_CPLD_RESET_REG;
+
+		reset_reg = 0x55AA0000 | (reset_reg & 0x0000FFFF);
+		ixp2000_reg_write(IXDP2X01_CPLD_RESET_REG, reset_reg);
+		ixp2000_reg_wrb(IXDP2X01_CPLD_RESET_REG, 0x80000000);
+	}
+
+	ixp2000_reg_wrb(IXP2000_RESET0, RSTALL);
+}
diff --git a/arch/arm/mach-ixp2000/include/mach/timex.h b/arch/arm/mach-ixp2000/include/mach/timex.h
new file mode 100644
index 000000000000..835e659f93d4
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/timex.h
+ *
+ * IXP2000 architecture timex specifications
+ */
+
+
+/*
+ * Default clock is 50MHz APB, but platform code can override this
+ */
+#define CLOCK_TICK_RATE	50000000
+
+
diff --git a/arch/arm/mach-ixp2000/include/mach/uncompress.h b/arch/arm/mach-ixp2000/include/mach/uncompress.h
new file mode 100644
index 000000000000..ce363087df78
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/uncompress.h
+ *
+ *
+ * Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2002 Intel Corp.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/serial_reg.h>
+
+#define UART_BASE	0xc0030000
+
+#define PHYS(x)          ((volatile unsigned long *)(UART_BASE + x))
+
+#define UARTDR          PHYS(0x00)      /* Transmit reg dlab=0 */
+#define UARTDLL         PHYS(0x00)      /* Divisor Latch reg dlab=1*/
+#define UARTDLM         PHYS(0x04)      /* Divisor Latch reg dlab=1*/
+#define UARTIER         PHYS(0x04)      /* Interrupt enable reg */
+#define UARTFCR         PHYS(0x08)      /* FIFO control reg dlab =0*/
+#define UARTLCR         PHYS(0x0c)      /* Control reg */
+#define UARTSR          PHYS(0x14)      /* Status reg */
+
+
+static inline void putc(int c)
+{
+	int j = 0x1000;
+
+	while (--j && !(*UARTSR & UART_LSR_THRE))
+		barrier();
+
+	*UARTDR = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ixp2000/include/mach/vmalloc.h b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
new file mode 100644
index 000000000000..d195e35aed3b
--- /dev/null
+++ b/arch/arm/mach-ixp2000/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ixp2000/include/mach/vmalloc.h
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Copyright 2002 Intel Corp.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_END	    0xfb000000
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index ce7c15c73004..c673b9ef9f69 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -31,7 +31,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 14f09b80ab77..6715b50829a6 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -31,7 +31,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 73c651e83d92..5a781fd9757a 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -31,7 +31,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
@@ -41,7 +41,7 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/arch.h>
 
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 
 /*************************************************************************
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index d3d730d2fc2b..78a2341dee2c 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -36,7 +36,7 @@
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c
index 03f4cf7f9dec..03d916fbe531 100644
--- a/arch/arm/mach-ixp2000/pci.c
+++ b/arch/arm/mach-ixp2000/pci.c
@@ -28,7 +28,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 5fea5a132939..68b4ac5b2481 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -32,8 +32,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
@@ -126,23 +125,23 @@ static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
 		return -EINVAL;
 
 	switch (type) {
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL;
 		irq_type = IXP23XX_IRQ_EDGE;
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		int_style = IXP23XX_GPIO_STYLE_RISING_EDGE;
 		irq_type = IXP23XX_IRQ_EDGE;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE;
 		irq_type = IXP23XX_IRQ_EDGE;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH;
 		irq_type = IXP23XX_IRQ_LEVEL;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW;
 		irq_type = IXP23XX_IRQ_LEVEL;
 		break;
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index d3a779a7a35f..1c06bfc5a7ef 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -29,7 +29,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..905db3188724
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/ixp23xx.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1				@ mmu enabled?
+		ldreq	\rx, =IXP23XX_PERIPHERAL_PHYS 	@ physical
+		ldrne	\rx, =IXP23XX_PERIPHERAL_VIRT	@ virtual
+#ifdef __ARMEB__
+		orr	\rx, \rx, #0x00000003
+#endif
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp23xx/include/mach/dma.h b/arch/arm/mach-ixp23xx/include/mach/dma.h
new file mode 100644
index 000000000000..8886544b93f7
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/dma.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/dma.h
+ */
diff --git a/arch/arm/mach-ixp23xx/include/mach/entry-macro.S b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
new file mode 100644
index 000000000000..3f5338a7bbdd
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/entry-macro.S
+ */
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
+		ldr	\irqnr, [\irqnr]	@ get interrupt number
+		cmp	\irqnr, #0x0		@ spurious interrupt ?
+		movne	\irqnr, \irqnr, lsr #2	@ skip unwanted low order bits
+		subne	\irqnr, \irqnr, #1	@ convert to 0 based
+
+#if 0
+		cmp	\irqnr, #IRQ_IXP23XX_PCI_INT_RPH
+		bne	1001f
+		mov	\irqnr, #IRQ_IXP23XX_INTA
+
+		ldr	\irqnr, =0xf5000030
+
+		mov	\tmp, #(1<<26)
+		tst	\irqnr, \tmp
+		movne	\irqnr, #IRQ_IXP23XX_INTB
+
+		mov	\tmp, #(1<<27)
+		tst	\irqnr, \tmp
+		movne	\irqnr, #IRQ_IXP23XX_INTA
+1001:
+#endif
+		.endm
diff --git a/arch/arm/mach-ixp23xx/include/mach/hardware.h b/arch/arm/mach-ixp23xx/include/mach/hardware.h
new file mode 100644
index 000000000000..c3192009a886
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/hardware.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/hardware.h
+ *
+ * Copyright (C) 2002-2004 Intel Corporation.
+ * Copyricht (C) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Hardware definitions for IXP23XX based systems
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* PCI IO info */
+#define PCIO_BASE		IXP23XX_PCI_IO_VIRT
+#define PCIBIOS_MIN_IO		0x00000000
+#define PCIBIOS_MIN_MEM		0xe0000000
+
+#include "ixp23xx.h"
+
+#define pcibios_assign_all_busses()	0
+
+/*
+ * Platform helper functions
+ */
+#include "platform.h"
+
+/*
+ * Platform-specific headers
+ */
+#include "ixdp2351.h"
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/io.h b/arch/arm/mach-ixp23xx/include/mach/io.h
new file mode 100644
index 000000000000..305ea1808c71
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/io.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/io.h
+ *
+ * Original Author: Naeem M Afzal <naeem.m.afzal@intel.com>
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2003-2005 Intel Corp.
+ * Copyright (C) 2005 MontaVista Software, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(p)		((void __iomem*)((p) + IXP23XX_PCI_IO_VIRT))
+#define __mem_pci(a)	(a)
+
+#include <linux/kernel.h>	/* For BUG */
+
+static inline void __iomem *
+ixp23xx_ioremap(unsigned long addr, unsigned long size, unsigned int mtype)
+{
+	if (addr >= IXP23XX_PCI_MEM_START &&
+		addr <= IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE) {
+		if (addr + size > IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE)
+			return NULL;
+
+		return (void __iomem *)
+ 			((addr - IXP23XX_PCI_MEM_START) + IXP23XX_PCI_MEM_VIRT);
+	}
+
+	return __arm_ioremap(addr, size, mtype);
+}
+
+static inline void
+ixp23xx_iounmap(void __iomem *addr)
+{
+	if ((((u32)addr) >= IXP23XX_PCI_MEM_VIRT) &&
+	    (((u32)addr) < IXP23XX_PCI_MEM_VIRT + IXP23XX_PCI_MEM_SIZE))
+		return;
+
+	__iounmap(addr);
+}
+
+#define __arch_ioremap(a,s,f)	ixp23xx_ioremap(a,s,f)
+#define __arch_iounmap(a)	ixp23xx_iounmap(a)
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/irqs.h b/arch/arm/mach-ixp23xx/include/mach/irqs.h
new file mode 100644
index 000000000000..3af33a04b8a2
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/irqs.h
@@ -0,0 +1,223 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/irqs.h
+ *
+ * IRQ definitions for IXP23XX based systems
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ *
+ * Copyright (C) 2003-2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#define NR_IXP23XX_IRQS			IRQ_IXP23XX_INTB+1
+#define IRQ_IXP23XX_EXTIRQS		NR_IXP23XX_IRQS
+
+
+#define IRQ_IXP23XX_DBG0		0	/* Debug/Execution/MBox */
+#define IRQ_IXP23XX_DBG1		1	/* Debug/Execution/MBox */
+#define IRQ_IXP23XX_NPE_TRG		2	/* npe_trigger */
+#define IRQ_IXP23XX_TIMER1		3	/* Timer[0] */
+#define IRQ_IXP23XX_TIMER2		4	/* Timer[1] */
+#define IRQ_IXP23XX_TIMESTAMP		5	/* Timer[2], Time-stamp */
+#define IRQ_IXP23XX_WDOG		6	/* Time[3], Watchdog Timer */
+#define IRQ_IXP23XX_PCI_DBELL		7	/* PCI Doorbell */
+#define IRQ_IXP23XX_PCI_DMA1		8	/* PCI DMA Channel 1 */
+#define IRQ_IXP23XX_PCI_DMA2		9	/* PCI DMA Channel 2 */
+#define IRQ_IXP23XX_PCI_DMA3		10	/* PCI DMA Channel 3 */
+#define IRQ_IXP23XX_PCI_INT_RPH		11	/* pcxg_pci_int_rph */
+#define IRQ_IXP23XX_CPP_PMU		12	/* xpxg_pm_int_rpl */
+#define IRQ_IXP23XX_SWINT0		13	/* S/W Interrupt0 */
+#define IRQ_IXP23XX_SWINT1		14	/* S/W Interrupt1 */
+#define IRQ_IXP23XX_UART2		15	/* UART1 Interrupt */
+#define IRQ_IXP23XX_UART1		16	/* UART0 Interrupt */
+#define IRQ_IXP23XX_XSI_PMU_ROLLOVER	17	/* AHB Performance M. Unit counter rollover */
+#define IRQ_IXP23XX_XSI_AHB_PM0		18	/* intr_pm_o */
+#define IRQ_IXP23XX_XSI_AHB_ECE0	19	/* intr_ece_o */
+#define IRQ_IXP23XX_XSI_AHB_GASKET	20	/* gas_intr_o */
+#define IRQ_IXP23XX_XSI_CPP		21	/* xsi2cpp_int */
+#define IRQ_IXP23XX_CPP_XSI		22	/* cpp2xsi_int */
+#define IRQ_IXP23XX_ME_ATTN0		23	/* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN1		24	/* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN2		25	/* ME_ATTN */
+#define IRQ_IXP23XX_ME_ATTN3		26	/* ME_ATTN */
+#define IRQ_IXP23XX_PCI_ERR_RPH		27	/* PCXG_PCI_ERR_RPH */
+#define IRQ_IXP23XX_D0XG_ECC_CORR	28	/* D0XG_DRAM_ECC_CORR */
+#define IRQ_IXP23XX_D0XG_ECC_UNCORR	29	/* D0XG_DRAM_ECC_UNCORR */
+#define IRQ_IXP23XX_SRAM_ERR1		30	/* SRAM1_ERR */
+#define IRQ_IXP23XX_SRAM_ERR0		31	/* SRAM0_ERR */
+#define IRQ_IXP23XX_MEDIA_ERR		32	/* MEDIA_ERR */
+#define IRQ_IXP23XX_STH_DRAM_ECC_MAJ	33	/* STH_DRAM0_ECC_MAJ */
+#define IRQ_IXP23XX_GPIO6		34	/* GPIO0 interrupts */
+#define IRQ_IXP23XX_GPIO7		35	/* GPIO1 interrupts */
+#define IRQ_IXP23XX_GPIO8		36	/* GPIO2 interrupts */
+#define IRQ_IXP23XX_GPIO9		37	/* GPIO3 interrupts */
+#define IRQ_IXP23XX_GPIO10		38	/* GPIO4 interrupts */
+#define IRQ_IXP23XX_GPIO11		39	/* GPIO5 interrupts */
+#define IRQ_IXP23XX_GPIO12		40	/* GPIO6 interrupts */
+#define IRQ_IXP23XX_GPIO13		41	/* GPIO7 interrupts */
+#define IRQ_IXP23XX_GPIO14		42	/* GPIO8 interrupts */
+#define IRQ_IXP23XX_GPIO15		43	/* GPIO9 interrupts */
+#define IRQ_IXP23XX_SHAC_RING0		44	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING1		45	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING2		46	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING3		47	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING4		48	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING5		49	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING6		50	/* SHAC RING Full */
+#define IRQ_IXP23XX_SHAC_RING7		51	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING8		52	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING9		53	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING10		54	/* SHAC Ring Full */
+#define IRQ_IXP23XX_SHAC_RING11		55	/* SHAC Ring Full */
+#define IRQ_IXP23XX_ME_THREAD_A0_ME0	56	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A1_ME0	57	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A2_ME0	58	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A3_ME0	59	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A4_ME0	60	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A5_ME0	61	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A6_ME0	62	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A7_ME0	63	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A8_ME1	64	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A9_ME1	65	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A10_ME1	66	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A11_ME1	67	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A12_ME1	68	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A13_ME1	69	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A14_ME1	70	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A15_ME1	71	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A16_ME2	72	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A17_ME2	73	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A18_ME2	74	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A19_ME2	75	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A20_ME2	76	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A21_ME2	77	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A22_ME2	78	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A23_ME2	79	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A24_ME3	80	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A25_ME3	81	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A26_ME3	82	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A27_ME3	83	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A28_ME3	84	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A29_ME3	85	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A30_ME3	86	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_A31_ME3	87	/* ME_THREAD_A */
+#define IRQ_IXP23XX_ME_THREAD_B0_ME0	88	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B1_ME0	89	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B2_ME0	90	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B3_ME0	91	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B4_ME0	92	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B5_ME0	93	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B6_ME0	94	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B7_ME0	95	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B8_ME1	96	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B9_ME1	97	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B10_ME1	98	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B11_ME1	99	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B12_ME1	100	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B13_ME1	101	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B14_ME1	102	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B15_ME1	103	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B16_ME2	104	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B17_ME2	105	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B18_ME2	106	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B19_ME2	107	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B20_ME2	108	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B21_ME2	109	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B22_ME2	110	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B23_ME2	111	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B24_ME3	112	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B25_ME3	113	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B26_ME3	114	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B27_ME3	115	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B28_ME3	116	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B29_ME3	117	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B30_ME3	118	/* ME_THREAD_B */
+#define IRQ_IXP23XX_ME_THREAD_B31_ME3	119	/* ME_THREAD_B */
+
+#define NUM_IXP23XX_RAW_IRQS		120
+
+#define IRQ_IXP23XX_INTA		120	/* Indirect pcxg_pci_int_rph */
+#define IRQ_IXP23XX_INTB		121	/* Indirect pcxg_pci_int_rph */
+
+#define NR_IXP23XX_IRQ			(IRQ_IXP23XX_INTB + 1)
+
+/*
+ * We default to 32 per-board IRQs. Increase this number if you need
+ * more, but keep it realistic.
+ */
+#define NR_IXP23XX_MACH_IRQS 		32
+
+#define NR_IRQS				(NR_IXP23XX_IRQS + NR_IXP23XX_MACH_IRQS)
+
+#define IXP23XX_MACH_IRQ(irq) 		(NR_IXP23XX_IRQ + (irq))
+
+
+/*
+ * IXDP2351-specific interrupts
+ */
+
+/*
+ * External PCI interrupts signaled through INTB
+ *
+ */
+#define IXDP2351_INTB_IRQ_BASE 		0
+#define IRQ_IXDP2351_INTA_82546		IXP23XX_MACH_IRQ(0)
+#define IRQ_IXDP2351_INTB_82546		IXP23XX_MACH_IRQ(1)
+#define IRQ_IXDP2351_SPCI_DB_0		IXP23XX_MACH_IRQ(2)
+#define IRQ_IXDP2351_SPCI_DB_1		IXP23XX_MACH_IRQ(3)
+#define IRQ_IXDP2351_SPCI_PMC_INTA	IXP23XX_MACH_IRQ(4)
+#define IRQ_IXDP2351_SPCI_PMC_INTB	IXP23XX_MACH_IRQ(5)
+#define IRQ_IXDP2351_SPCI_PMC_INTC	IXP23XX_MACH_IRQ(6)
+#define IRQ_IXDP2351_SPCI_PMC_INTD	IXP23XX_MACH_IRQ(7)
+#define IRQ_IXDP2351_SPCI_FIC		IXP23XX_MACH_IRQ(8)
+
+#define IXDP2351_INTB_IRQ_BIT(irq)	(irq - IXP23XX_MACH_IRQ(0))
+#define IXDP2351_INTB_IRQ_MASK(irq)	(1 << IXDP2351_INTB_IRQ_BIT(irq))
+#define IXDP2351_INTB_IRQ_VALID		0x01FF
+#define IXDP2351_INTB_IRQ_NUM 		16
+
+/*
+ * Other external interrupts signaled through INTA
+ */
+#define IXDP2351_INTA_IRQ_BASE 		16
+#define IRQ_IXDP2351_IPMI_FROM		IXP23XX_MACH_IRQ(16)
+#define IRQ_IXDP2351_125US		IXP23XX_MACH_IRQ(17)
+#define IRQ_IXDP2351_DB_0_ADD		IXP23XX_MACH_IRQ(18)
+#define IRQ_IXDP2351_DB_1_ADD		IXP23XX_MACH_IRQ(19)
+#define IRQ_IXDP2351_DEBUG1		IXP23XX_MACH_IRQ(20)
+#define IRQ_IXDP2351_ADD_UART		IXP23XX_MACH_IRQ(21)
+#define IRQ_IXDP2351_FIC_ADD		IXP23XX_MACH_IRQ(24)
+#define IRQ_IXDP2351_CS8900		IXP23XX_MACH_IRQ(25)
+#define IRQ_IXDP2351_BBSRAM		IXP23XX_MACH_IRQ(26)
+#define IRQ_IXDP2351_CONFIG_MEDIA	IXP23XX_MACH_IRQ(27)
+#define IRQ_IXDP2351_CLOCK_REF		IXP23XX_MACH_IRQ(28)
+#define IRQ_IXDP2351_A10_NP		IXP23XX_MACH_IRQ(29)
+#define IRQ_IXDP2351_A11_NP		IXP23XX_MACH_IRQ(30)
+#define IRQ_IXDP2351_DEBUG_NP		IXP23XX_MACH_IRQ(31)
+
+#define IXDP2351_INTA_IRQ_BIT(irq) 	(irq - IXP23XX_MACH_IRQ(16))
+#define IXDP2351_INTA_IRQ_MASK(irq) 	(1 << IXDP2351_INTA_IRQ_BIT(irq))
+#define IXDP2351_INTA_IRQ_VALID 	0xFF3F
+#define IXDP2351_INTA_IRQ_NUM 		16
+
+
+/*
+ * ADI RoadRunner IRQs
+ */
+#define IRQ_ROADRUNNER_PCI_INTA 	IRQ_IXP23XX_INTA
+#define IRQ_ROADRUNNER_PCI_INTB 	IRQ_IXP23XX_INTB
+#define IRQ_ROADRUNNER_PCI_INTC 	IRQ_IXP23XX_GPIO11
+#define IRQ_ROADRUNNER_PCI_INTD 	IRQ_IXP23XX_GPIO12
+
+/*
+ * Put new board definitions here
+ */
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h b/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
new file mode 100644
index 000000000000..663951027de5
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/ixdp2351.h
+ *
+ * Register and other defines for IXDP2351
+ *
+ * Copyright (c) 2002-2004 Intel Corp.
+ * Copytight (c) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_IXDP2351_H
+#define __ASM_ARCH_IXDP2351_H
+
+/*
+ * NP module memory map
+ */
+#define IXDP2351_NP_PHYS_BASE		(IXP23XX_EXP_BUS_CS4_BASE)
+#define IXDP2351_NP_PHYS_SIZE		0x00100000
+#define IXDP2351_NP_VIRT_BASE		0xeff00000
+
+#define IXDP2351_VIRT_CS8900_BASE	(IXDP2351_NP_VIRT_BASE)
+#define IXDP2351_VIRT_CS8900_END	(IXDP2351_VIRT_CS8900_BASE + 16)
+
+#define IXDP2351_VIRT_NP_CPLD_BASE 	(IXP23XX_EXP_BUS_CS4_BASE_VIRT + 0x00010000)
+
+#define IXDP2351_NP_CPLD_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_NP_CPLD_BASE + reg))
+
+#define IXDP2351_NP_CPLD_RESET1_REG	IXDP2351_NP_CPLD_REG(0x00)
+#define IXDP2351_NP_CPLD_LED_REG	IXDP2351_NP_CPLD_REG(0x02)
+#define IXDP2351_NP_CPLD_VERSION_REG	IXDP2351_NP_CPLD_REG(0x04)
+
+/*
+ * Base board module memory map
+ */
+
+#define IXDP2351_BB_BASE_PHYS		(IXP23XX_EXP_BUS_CS5_BASE)
+#define IXDP2351_BB_SIZE		0x01000000
+#define IXDP2351_BB_BASE_VIRT		(0xee000000)
+
+#define IXDP2351_BB_AREA_BASE(offset)	(IXDP2351_BB_BASE_VIRT + offset)
+
+#define IXDP2351_VIRT_NVRAM_BASE	IXDP2351_BB_AREA_BASE(0x0)
+#define IXDP2351_NVRAM_SIZE		(0x20000)
+
+#define IXDP2351_VIRT_MB_IXF1104_BASE	IXDP2351_BB_AREA_BASE(0x00020000)
+#define IXDP2351_VIRT_ADD_UART_BASE	IXDP2351_BB_AREA_BASE(0x000240C0)
+#define IXDP2351_VIRT_FIC_BASE		IXDP2351_BB_AREA_BASE(0x00200000)
+#define IXDP2351_VIRT_DB0_BASE		IXDP2351_BB_AREA_BASE(0x00400000)
+#define IXDP2351_VIRT_DB1_BASE		IXDP2351_BB_AREA_BASE(0x00600000)
+#define IXDP2351_VIRT_CPLD_BASE		IXDP2351_BB_AREA_BASE(0x00024000)
+
+/*
+ * On board CPLD registers
+ */
+#define IXDP2351_CPLD_BB_REG(reg) ((volatile u16 *)(IXDP2351_VIRT_CPLD_BASE + reg))
+
+#define IXDP2351_CPLD_RESET0_REG	IXDP2351_CPLD_BB_REG(0x00)
+#define IXDP2351_CPLD_RESET1_REG	IXDP2351_CPLD_BB_REG(0x04)
+
+#define IXDP2351_CPLD_RESET1_MAGIC 	0x55AA
+#define IXDP2351_CPLD_RESET1_ENABLE 	0x8000
+
+#define IXDP2351_CPLD_FPGA_CONFIG_REG	IXDP2351_CPLD_BB_REG(0x08)
+#define IXDP2351_CPLD_INTB_MASK_SET_REG	IXDP2351_CPLD_BB_REG(0x10)
+#define IXDP2351_CPLD_INTA_MASK_SET_REG	IXDP2351_CPLD_BB_REG(0x14)
+#define IXDP2351_CPLD_INTB_STAT_REG	IXDP2351_CPLD_BB_REG(0x18)
+#define IXDP2351_CPLD_INTA_STAT_REG	IXDP2351_CPLD_BB_REG(0x1C)
+#define IXDP2351_CPLD_INTB_RAW_REG	IXDP2351_CPLD_BB_REG(0x20)	/* read */
+#define IXDP2351_CPLD_INTA_RAW_REG	IXDP2351_CPLD_BB_REG(0x24)	/* read */
+#define IXDP2351_CPLD_INTB_MASK_CLR_REG	IXDP2351_CPLD_INTB_RAW_REG	/* write */
+#define IXDP2351_CPLD_INTA_MASK_CLR_REG	IXDP2351_CPLD_INTA_RAW_REG	/* write */
+#define IXDP2351_CPLD_INTB_SIM_REG	IXDP2351_CPLD_BB_REG(0x28)
+#define IXDP2351_CPLD_INTA_SIM_REG	IXDP2351_CPLD_BB_REG(0x2C)
+	/* Interrupt bits are defined in irqs.h */
+#define IXDP2351_CPLD_BB_GBE0_REG	IXDP2351_CPLD_BB_REG(0x30)
+#define IXDP2351_CPLD_BB_GBE1_REG	IXDP2351_CPLD_BB_REG(0x34)
+
+/* #define IXDP2351_CPLD_BB_MISC_REG	IXDP2351_CPLD_REG(0x1C) */
+/* #define IXDP2351_CPLD_BB_MISC_REV_MASK	0xFF		*/
+/* #define IXDP2351_CPLD_BB_GDXCS0_REG	IXDP2351_CPLD_REG(0x24) */
+/* #define IXDP2351_CPLD_BB_GDXCS1_REG	IXDP2351_CPLD_REG(0x28) */
+/* #define IXDP2351_CPLD_BB_CLOCK_REG	IXDP2351_CPLD_REG(0x04) */
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h b/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
new file mode 100644
index 000000000000..6d02481b1d6d
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
@@ -0,0 +1,298 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/ixp23xx.h
+ *
+ * Register definitions for IXP23XX
+ *
+ * Copyright (C) 2003-2005 Intel Corporation.
+ * Copyright (C) 2005 MontaVista Software, Inc.
+ *
+ * Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IXP23XX_H
+#define __ASM_ARCH_IXP23XX_H
+
+/*
+ * IXP2300 linux memory map:
+ *
+ * virt		phys		size
+ * fffd0000	a0000000	64K		XSI2CPP_CSR
+ * fffc0000	c4000000	4K		EXP_CFG
+ * fff00000	c8000000	64K		PERIPHERAL
+ * fe000000	1c0000000	16M		CAP_CSR
+ * fd000000	1c8000000	16M		MSF_CSR
+ * fb000000			16M		---
+ * fa000000	1d8000000	32M		PCI_IO
+ * f8000000	1da000000	32M		PCI_CFG
+ * f6000000	1de000000	32M		PCI_CREG
+ * f4000000			32M		---
+ * f0000000	1e0000000	64M		PCI_MEM
+ * e[c-f]000000					per-platform mappings
+ */
+
+
+/****************************************************************************
+ * Static mappings.
+ ****************************************************************************/
+#define IXP23XX_XSI2CPP_CSR_PHYS	0xa0000000
+#define IXP23XX_XSI2CPP_CSR_VIRT	0xfffd0000
+#define IXP23XX_XSI2CPP_CSR_SIZE	0x00010000
+
+#define IXP23XX_EXP_CFG_PHYS		0xc4000000
+#define IXP23XX_EXP_CFG_VIRT		0xfffc0000
+#define IXP23XX_EXP_CFG_SIZE		0x00001000
+
+#define IXP23XX_PERIPHERAL_PHYS		0xc8000000
+#define IXP23XX_PERIPHERAL_VIRT		0xfff00000
+#define IXP23XX_PERIPHERAL_SIZE		0x00010000
+
+#define IXP23XX_CAP_CSR_PHYS		0x1c0000000ULL
+#define IXP23XX_CAP_CSR_VIRT		0xfe000000
+#define IXP23XX_CAP_CSR_SIZE		0x01000000
+
+#define IXP23XX_MSF_CSR_PHYS		0x1c8000000ULL
+#define IXP23XX_MSF_CSR_VIRT		0xfd000000
+#define IXP23XX_MSF_CSR_SIZE		0x01000000
+
+#define IXP23XX_PCI_IO_PHYS		0x1d8000000ULL
+#define IXP23XX_PCI_IO_VIRT		0xfa000000
+#define IXP23XX_PCI_IO_SIZE		0x02000000
+
+#define IXP23XX_PCI_CFG_PHYS		0x1da000000ULL
+#define IXP23XX_PCI_CFG_VIRT		0xf8000000
+#define IXP23XX_PCI_CFG_SIZE		0x02000000
+#define IXP23XX_PCI_CFG0_VIRT		IXP23XX_PCI_CFG_VIRT
+#define IXP23XX_PCI_CFG1_VIRT		(IXP23XX_PCI_CFG_VIRT + 0x01000000)
+
+#define IXP23XX_PCI_CREG_PHYS		0x1de000000ULL
+#define IXP23XX_PCI_CREG_VIRT		0xf6000000
+#define IXP23XX_PCI_CREG_SIZE		0x02000000
+#define IXP23XX_PCI_CSR_VIRT		(IXP23XX_PCI_CREG_VIRT + 0x01000000)
+
+#define IXP23XX_PCI_MEM_START		0xe0000000
+#define IXP23XX_PCI_MEM_PHYS		0x1e0000000ULL
+#define IXP23XX_PCI_MEM_VIRT		0xf0000000
+#define IXP23XX_PCI_MEM_SIZE		0x04000000
+
+
+/****************************************************************************
+ * XSI2CPP CSRs.
+ ****************************************************************************/
+#define IXP23XX_XSI2CPP_REG(x)		((volatile unsigned long *)(IXP23XX_XSI2CPP_CSR_VIRT + (x)))
+#define IXP23XX_CPP2XSI_CURR_XFER_REG3	IXP23XX_XSI2CPP_REG(0xf8)
+#define IXP23XX_CPP2XSI_ADDR_31		(1 << 19)
+#define IXP23XX_CPP2XSI_PSH_OFF		(1 << 20)
+#define IXP23XX_CPP2XSI_COH_OFF		(1 << 21)
+
+
+/****************************************************************************
+ * Expansion Bus Config.
+ ****************************************************************************/
+#define IXP23XX_EXP_CFG_REG(x)		((volatile unsigned long *)(IXP23XX_EXP_CFG_VIRT + (x)))
+#define IXP23XX_EXP_CS0			IXP23XX_EXP_CFG_REG(0x00)
+#define IXP23XX_EXP_CS1			IXP23XX_EXP_CFG_REG(0x04)
+#define IXP23XX_EXP_CS2			IXP23XX_EXP_CFG_REG(0x08)
+#define IXP23XX_EXP_CS3			IXP23XX_EXP_CFG_REG(0x0c)
+#define IXP23XX_EXP_CS4			IXP23XX_EXP_CFG_REG(0x10)
+#define IXP23XX_EXP_CS5			IXP23XX_EXP_CFG_REG(0x14)
+#define IXP23XX_EXP_CS6			IXP23XX_EXP_CFG_REG(0x18)
+#define IXP23XX_EXP_CS7			IXP23XX_EXP_CFG_REG(0x1c)
+#define IXP23XX_FLASH_WRITABLE		(0x2)
+#define IXP23XX_FLASH_BUS8		(0x1)
+
+#define IXP23XX_EXP_CFG0		IXP23XX_EXP_CFG_REG(0x20)
+#define IXP23XX_EXP_CFG1		IXP23XX_EXP_CFG_REG(0x24)
+#define IXP23XX_EXP_CFG0_MEM_MAP		(1 << 31)
+#define IXP23XX_EXP_CFG0_XSCALE_SPEED_SEL 	(3 << 22)
+#define IXP23XX_EXP_CFG0_XSCALE_SPEED_EN	(1 << 21)
+#define IXP23XX_EXP_CFG0_CPP_SPEED_SEL		(3 << 19)
+#define IXP23XX_EXP_CFG0_CPP_SPEED_EN		(1 << 18)
+#define IXP23XX_EXP_CFG0_PCI_SWIN		(3 << 16)
+#define IXP23XX_EXP_CFG0_PCI_DWIN		(3 << 14)
+#define IXP23XX_EXP_CFG0_PCI33_MODE		(1 << 13)
+#define IXP23XX_EXP_CFG0_QDR_SPEED_SEL		(1 << 12)
+#define IXP23XX_EXP_CFG0_CPP_DIV_SEL		(1 << 5)
+#define IXP23XX_EXP_CFG0_XSI_NOT_PRES		(1 << 4)
+#define IXP23XX_EXP_CFG0_PROM_BOOT		(1 << 3)
+#define IXP23XX_EXP_CFG0_PCI_ARB		(1 << 2)
+#define IXP23XX_EXP_CFG0_PCI_HOST		(1 << 1)
+#define IXP23XX_EXP_CFG0_FLASH_WIDTH		(1 << 0)
+
+#define IXP23XX_EXP_UNIT_FUSE		IXP23XX_EXP_CFG_REG(0x28)
+#define IXP23XX_EXP_MSF_MUX		IXP23XX_EXP_CFG_REG(0x30)
+#define IXP23XX_EXP_CFG_FUSE		IXP23XX_EXP_CFG_REG(0x34)
+
+#define IXP23XX_EXP_BUS_PHYS		0x90000000
+#define IXP23XX_EXP_BUS_WINDOW_SIZE	0x01000000
+
+#define IXP23XX_EXP_BUS_CS0_BASE	(IXP23XX_EXP_BUS_PHYS + 0x00000000)
+#define IXP23XX_EXP_BUS_CS1_BASE	(IXP23XX_EXP_BUS_PHYS + 0x01000000)
+#define IXP23XX_EXP_BUS_CS2_BASE	(IXP23XX_EXP_BUS_PHYS + 0x02000000)
+#define IXP23XX_EXP_BUS_CS3_BASE	(IXP23XX_EXP_BUS_PHYS + 0x03000000)
+#define IXP23XX_EXP_BUS_CS4_BASE	(IXP23XX_EXP_BUS_PHYS + 0x04000000)
+#define IXP23XX_EXP_BUS_CS5_BASE	(IXP23XX_EXP_BUS_PHYS + 0x05000000)
+#define IXP23XX_EXP_BUS_CS6_BASE	(IXP23XX_EXP_BUS_PHYS + 0x06000000)
+#define IXP23XX_EXP_BUS_CS7_BASE	(IXP23XX_EXP_BUS_PHYS + 0x07000000)
+
+
+/****************************************************************************
+ * Peripherals.
+ ****************************************************************************/
+#define IXP23XX_UART1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x0000)
+#define IXP23XX_UART2_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x1000)
+#define IXP23XX_PMU_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x2000)
+#define IXP23XX_INTC_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x3000)
+#define IXP23XX_GPIO_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x4000)
+#define IXP23XX_TIMER_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x5000)
+#define IXP23XX_NPE0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x6000)
+#define IXP23XX_DSR_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x7000)
+#define IXP23XX_NPE1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x8000)
+#define IXP23XX_ETH0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0x9000)
+#define IXP23XX_ETH1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xA000)
+#define IXP23XX_GIG0_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xB000)
+#define IXP23XX_GIG1_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xC000)
+#define IXP23XX_DDRS_VIRT		(IXP23XX_PERIPHERAL_VIRT + 0xD000)
+
+#define IXP23XX_UART1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x0000)
+#define IXP23XX_UART2_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x1000)
+#define IXP23XX_PMU_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x2000)
+#define IXP23XX_INTC_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x3000)
+#define IXP23XX_GPIO_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x4000)
+#define IXP23XX_TIMER_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x5000)
+#define IXP23XX_NPE0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x6000)
+#define IXP23XX_DSR_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x7000)
+#define IXP23XX_NPE1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x8000)
+#define IXP23XX_ETH0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0x9000)
+#define IXP23XX_ETH1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xA000)
+#define IXP23XX_GIG0_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xB000)
+#define IXP23XX_GIG1_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xC000)
+#define IXP23XX_DDRS_PHYS		(IXP23XX_PERIPHERAL_PHYS + 0xD000)
+
+
+/****************************************************************************
+ * Interrupt controller.
+ ****************************************************************************/
+#define IXP23XX_INTC_REG(x)		 ((volatile unsigned long *)(IXP23XX_INTC_VIRT + (x)))
+#define IXP23XX_INTR_ST1		IXP23XX_INTC_REG(0x00)
+#define IXP23XX_INTR_ST2		IXP23XX_INTC_REG(0x04)
+#define IXP23XX_INTR_ST3		IXP23XX_INTC_REG(0x08)
+#define IXP23XX_INTR_ST4		IXP23XX_INTC_REG(0x0c)
+#define IXP23XX_INTR_EN1		IXP23XX_INTC_REG(0x10)
+#define IXP23XX_INTR_EN2		IXP23XX_INTC_REG(0x14)
+#define IXP23XX_INTR_EN3		IXP23XX_INTC_REG(0x18)
+#define IXP23XX_INTR_EN4		IXP23XX_INTC_REG(0x1c)
+#define IXP23XX_INTR_SEL1		IXP23XX_INTC_REG(0x20)
+#define IXP23XX_INTR_SEL2		IXP23XX_INTC_REG(0x24)
+#define IXP23XX_INTR_SEL3		IXP23XX_INTC_REG(0x28)
+#define IXP23XX_INTR_SEL4		IXP23XX_INTC_REG(0x2c)
+#define IXP23XX_INTR_IRQ_ST1		IXP23XX_INTC_REG(0x30)
+#define IXP23XX_INTR_IRQ_ST2		IXP23XX_INTC_REG(0x34)
+#define IXP23XX_INTR_IRQ_ST3		IXP23XX_INTC_REG(0x38)
+#define IXP23XX_INTR_IRQ_ST4		IXP23XX_INTC_REG(0x3c)
+#define IXP23XX_INTR_IRQ_ENC_ST_OFFSET	0x54
+
+
+/****************************************************************************
+ * GPIO.
+ ****************************************************************************/
+#define IXP23XX_GPIO_REG(x)		((volatile unsigned long *)(IXP23XX_GPIO_VIRT + (x)))
+#define IXP23XX_GPIO_GPOUTR		IXP23XX_GPIO_REG(0x00)
+#define IXP23XX_GPIO_GPOER		IXP23XX_GPIO_REG(0x04)
+#define IXP23XX_GPIO_GPINR		IXP23XX_GPIO_REG(0x08)
+#define IXP23XX_GPIO_GPISR		IXP23XX_GPIO_REG(0x0c)
+#define IXP23XX_GPIO_GPIT1R		IXP23XX_GPIO_REG(0x10)
+#define IXP23XX_GPIO_GPIT2R		IXP23XX_GPIO_REG(0x14)
+#define IXP23XX_GPIO_GPCLKR		IXP23XX_GPIO_REG(0x18)
+#define IXP23XX_GPIO_GPDBSELR 		IXP23XX_GPIO_REG(0x1c)
+
+#define IXP23XX_GPIO_STYLE_MASK		0x7
+#define IXP23XX_GPIO_STYLE_ACTIVE_HIGH	0x0
+#define IXP23XX_GPIO_STYLE_ACTIVE_LOW	0x1
+#define IXP23XX_GPIO_STYLE_RISING_EDGE	0x2
+#define IXP23XX_GPIO_STYLE_FALLING_EDGE	0x3
+#define IXP23XX_GPIO_STYLE_TRANSITIONAL	0x4
+
+#define IXP23XX_GPIO_STYLE_SIZE		3
+
+
+/****************************************************************************
+ * Timer.
+ ****************************************************************************/
+#define IXP23XX_TIMER_REG(x)		((volatile unsigned long *)(IXP23XX_TIMER_VIRT + (x)))
+#define IXP23XX_TIMER_CONT		IXP23XX_TIMER_REG(0x00)
+#define IXP23XX_TIMER1_TIMESTAMP	IXP23XX_TIMER_REG(0x04)
+#define IXP23XX_TIMER1_RELOAD		IXP23XX_TIMER_REG(0x08)
+#define IXP23XX_TIMER2_TIMESTAMP	IXP23XX_TIMER_REG(0x0c)
+#define IXP23XX_TIMER2_RELOAD		IXP23XX_TIMER_REG(0x10)
+#define IXP23XX_TIMER_WDOG		IXP23XX_TIMER_REG(0x14)
+#define IXP23XX_TIMER_WDOG_EN		IXP23XX_TIMER_REG(0x18)
+#define IXP23XX_TIMER_WDOG_KEY		IXP23XX_TIMER_REG(0x1c)
+#define IXP23XX_TIMER_WDOG_KEY_MAGIC	0x482e
+#define IXP23XX_TIMER_STATUS		IXP23XX_TIMER_REG(0x20)
+#define IXP23XX_TIMER_SOFT_RESET	IXP23XX_TIMER_REG(0x24)
+#define IXP23XX_TIMER_SOFT_RESET_EN	IXP23XX_TIMER_REG(0x28)
+
+#define IXP23XX_TIMER_ENABLE		(1 << 0)
+#define IXP23XX_TIMER_ONE_SHOT		(1 << 1)
+/* Low order bits of reload value ignored */
+#define IXP23XX_TIMER_RELOAD_MASK	(0x3)
+#define IXP23XX_TIMER_DISABLED		(0x0)
+#define IXP23XX_TIMER1_INT_PEND		(1 << 0)
+#define IXP23XX_TIMER2_INT_PEND		(1 << 1)
+#define IXP23XX_TIMER_STATUS_TS_PEND	(1 << 2)
+#define IXP23XX_TIMER_STATUS_WDOG_PEND	(1 << 3)
+#define IXP23XX_TIMER_STATUS_WARM_RESET	(1 << 4)
+
+
+/****************************************************************************
+ * CAP CSRs.
+ ****************************************************************************/
+#define IXP23XX_GLOBAL_REG(x)		((volatile unsigned long *)(IXP23XX_CAP_CSR_VIRT + 0x4a00 + (x)))
+#define IXP23XX_PRODUCT_ID		IXP23XX_GLOBAL_REG(0x00)
+#define IXP23XX_MISC_CONTROL		IXP23XX_GLOBAL_REG(0x04)
+#define IXP23XX_MSF_CLK_CNTRL		IXP23XX_GLOBAL_REG(0x08)
+#define IXP23XX_RESET0			IXP23XX_GLOBAL_REG(0x0c)
+#define IXP23XX_RESET1			IXP23XX_GLOBAL_REG(0x10)
+#define IXP23XX_STRAP_OPTIONS		IXP23XX_GLOBAL_REG(0x18)
+
+#define IXP23XX_ENABLE_WATCHDOG		(1 << 24)
+#define IXP23XX_SHPC_INIT_COMP		(1 << 21)
+#define IXP23XX_RST_ALL			(1 << 16)
+#define IXP23XX_RESET_PCI		(1 << 2)
+#define IXP23XX_PCI_UNIT_RESET		(1 << 1)
+#define IXP23XX_XSCALE_RESET		(1 << 0)
+
+#define IXP23XX_UENGINE_CSR_VIRT_BASE	(IXP23XX_CAP_CSR_VIRT + 0x18000)
+
+
+/****************************************************************************
+ * PCI CSRs.
+ ****************************************************************************/
+#define IXP23XX_PCI_CREG(x)		((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + (x)))
+#define IXP23XX_PCI_CMDSTAT		IXP23XX_PCI_CREG(0x04)
+#define IXP23XX_PCI_SRAM_BAR		IXP23XX_PCI_CREG(0x14)
+#define IXP23XX_PCI_SDRAM_BAR		IXP23XX_PCI_CREG(0x18)
+
+
+#define IXP23XX_PCI_CSR(x)		((volatile unsigned long *)(IXP23XX_PCI_CREG_VIRT + 0x01000000 + (x)))
+#define IXP23XX_PCI_OUT_INT_STATUS	IXP23XX_PCI_CSR(0x0030)
+#define IXP23XX_PCI_OUT_INT_MASK	IXP23XX_PCI_CSR(0x0034)
+#define IXP23XX_PCI_SRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x00fc)
+#define IXP23XX_PCI_DRAM_BASE_ADDR_MASK IXP23XX_PCI_CSR(0x0100)
+#define IXP23XX_PCI_CONTROL		IXP23XX_PCI_CSR(0x013c)
+#define IXP23XX_PCI_ADDR_EXT		IXP23XX_PCI_CSR(0x0140)
+#define IXP23XX_PCI_ME_PUSH_STATUS	IXP23XX_PCI_CSR(0x0148)
+#define IXP23XX_PCI_ME_PUSH_EN		IXP23XX_PCI_CSR(0x014c)
+#define IXP23XX_PCI_ERR_STATUS		IXP23XX_PCI_CSR(0x0150)
+#define IXP23XX_PCI_ERROR_STATUS	IXP23XX_PCI_CSR(0x0150)
+#define IXP23XX_PCI_ERR_ENABLE		IXP23XX_PCI_CSR(0x0154)
+#define IXP23XX_PCI_XSCALE_INT_STATUS	IXP23XX_PCI_CSR(0x0158)
+#define IXP23XX_PCI_XSCALE_INT_ENABLE	IXP23XX_PCI_CSR(0x015c)
+#define IXP23XX_PCI_CPP_ADDR_BITS	IXP23XX_PCI_CSR(0x0160)
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h
new file mode 100644
index 000000000000..9d40115f7ebe
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/memory.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/memory.h
+ *
+ * Copyright (c) 2003-2004 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		(0x00000000)
+
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#ifndef __ASSEMBLY__
+
+#define __virt_to_bus(v)						\
+	({ unsigned int ret;						\
+	ret = ((__virt_to_phys(v) - 0x00000000) +			\
+	 (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); 	\
+	ret; })
+
+#define __bus_to_virt(b)						\
+	({ unsigned int data;						\
+	data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR);		\
+	 __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
+
+#define arch_is_coherent()	1
+
+#endif
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/platform.h b/arch/arm/mach-ixp23xx/include/mach/platform.h
new file mode 100644
index 000000000000..db9d9416e5e4
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/platform.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/platform.h
+ *
+ * Various bits of code used by platform-level code.
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2005 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long ixp2000_reg_read(volatile void *reg)
+{
+	return *((volatile unsigned long *)reg);
+}
+
+static inline void ixp2000_reg_write(volatile void *reg, unsigned long val)
+{
+	*((volatile unsigned long *)reg) = val;
+}
+
+static inline void ixp2000_reg_wrb(volatile void *reg, unsigned long val)
+{
+	*((volatile unsigned long *)reg) = val;
+}
+
+struct pci_sys_data;
+
+void ixp23xx_map_io(void);
+void ixp23xx_init_irq(void);
+void ixp23xx_sys_init(void);
+int ixp23xx_pci_setup(int, struct pci_sys_data *);
+void ixp23xx_pci_preinit(void);
+struct pci_bus *ixp23xx_pci_scan_bus(int, struct pci_sys_data*);
+void ixp23xx_pci_slave_init(void);
+
+extern struct sys_timer ixp23xx_timer;
+
+#define IXP23XX_UART_XTAL		14745600
+
+#ifndef __ASSEMBLY__
+/*
+ * Is system memory on the XSI or CPP bus?
+ */
+static inline unsigned ixp23xx_cpp_boot(void)
+{
+	return (*IXP23XX_EXP_CFG0 & IXP23XX_EXP_CFG0_XSI_NOT_PRES);
+}
+#endif
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
new file mode 100644
index 000000000000..d57c3fc10f1f
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/system.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/system.h
+ *
+ * Copyright (C) 2003 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+static inline void arch_idle(void)
+{
+#if 0
+	if (!hlt_counter)
+		cpu_do_idle();
+#endif
+}
+
+static inline void arch_reset(char mode)
+{
+	/* First try machine specific support */
+	if (machine_is_ixdp2351()) {
+		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC;
+		(void) *IXDP2351_CPLD_RESET1_REG;
+		*IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE;
+	}
+
+	/* Use on-chip reset capability */
+	*IXP23XX_RESET0 |= IXP23XX_RST_ALL;
+}
diff --git a/arch/arm/mach-ixp23xx/include/mach/time.h b/arch/arm/mach-ixp23xx/include/mach/time.h
new file mode 100644
index 000000000000..b61dafc884ac
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/time.h
@@ -0,0 +1,3 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/time.h
+ */
diff --git a/arch/arm/mach-ixp23xx/include/mach/timex.h b/arch/arm/mach-ixp23xx/include/mach/timex.h
new file mode 100644
index 000000000000..e341e9cf9c37
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/timex.h
@@ -0,0 +1,7 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/timex.h
+ *
+ * XScale architecture timex specifications
+ */
+
+#define CLOCK_TICK_RATE 75000000
diff --git a/arch/arm/mach-ixp23xx/include/mach/uncompress.h b/arch/arm/mach-ixp23xx/include/mach/uncompress.h
new file mode 100644
index 000000000000..8b4c358d2c04
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/uncompress.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2002-2004 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/ixp23xx.h>
+#include <linux/serial_reg.h>
+
+#define UART_BASE	((volatile u32 *)IXP23XX_UART1_PHYS)
+
+static inline void putc(char c)
+{
+	int j;
+
+	for (j = 0; j < 0x1000; j++) {
+		if (UART_BASE[UART_LSR] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	UART_BASE[UART_TX] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+
+#endif
diff --git a/arch/arm/mach-ixp23xx/include/mach/vmalloc.h b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
new file mode 100644
index 000000000000..dd519f678d10
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-ixp23xx/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ * NPU mappings end at 0xf0000000 and we allocate 64MB for board
+ * specific static I/O.
+ */
+
+#define VMALLOC_END	(0xec000000)
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index 5c5d4d66dee8..b6e0bfa44df9 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -34,7 +34,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/system.h>
 #include <asm/tlbflush.h>
diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
index 227f808dc0ec..701d60aa0efd 100644
--- a/arch/arm/mach-ixp23xx/pci.c
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -31,8 +31,7 @@
 #include <asm/sizes.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
-#include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 extern int (*external_fault) (unsigned long, struct pt_regs *);
 
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index f0f70ba1e46d..6d38d769761c 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -33,7 +33,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/system.h>
@@ -110,8 +110,8 @@ static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
 
 static void __init roadrunner_pci_preinit(void)
 {
-	set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
 	ixp23xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
index 3f867691d9f2..08d65dcdb5fe 100644
--- a/arch/arm/mach-ixp4xx/avila-pci.c
+++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -25,15 +25,15 @@
 
 #include <asm/mach/pci.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 void __init avila_pci_preinit(void)
 {
-	set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_AVILA_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index e38f45fa58ae..797995ce18b9 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -23,7 +23,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 64be341109b3..192538a04575 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -32,7 +32,7 @@
 #include <asm/sizes.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 
 /*
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 3781b3db9f49..58bd2842a6f1 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -29,8 +29,8 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 
-#include <asm/arch/udc.h>
-#include <asm/hardware.h>
+#include <mach/udc.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
@@ -142,23 +142,23 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type)
 		return -EINVAL;
 
 	switch (type){
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL;
 		irq_type = IXP4XX_IRQ_EDGE;
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		int_style = IXP4XX_GPIO_STYLE_RISING_EDGE;
 		irq_type = IXP4XX_IRQ_EDGE;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE;
 		irq_type = IXP4XX_IRQ_EDGE;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH;
 		irq_type = IXP4XX_IRQ_LEVEL;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW;
 		irq_type = IXP4XX_IRQ_LEVEL;
 		break;
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index ad2e5b97966e..efddf01ed17b 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -20,15 +20,15 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/pci.h>
 
 void __init coyote_pci_preinit(void)
 {
-	set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW);
-	set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW);
+	set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 13f8a7ac3ba9..aab1954e2747 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -19,7 +19,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c
index 9db7e1f42011..926d15f885fb 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-pci.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c
@@ -25,12 +25,12 @@
 
 void __init dsmg600_pci_preinit(void)
 {
-	set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTE, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTF, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
index f19f3f6feda1..ca12a9ca0830 100644
--- a/arch/arm/mach-ixp4xx/fsg-pci.c
+++ b/arch/arm/mach-ixp4xx/fsg-pci.c
@@ -25,9 +25,9 @@
 
 void __init fsg_pci_preinit(void)
 {
-	set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_FSG_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c
index 6abf568322d3..7e93a0975c4d 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-pci.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c
@@ -23,14 +23,14 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
 void __init gateway7001_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW);
-	set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 37876832e141..59b73a0ddfa9 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -22,7 +22,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index 49dec7868807..7b8a2c323840 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -28,8 +28,8 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/arch/gtwx5715.h>
+#include <mach/hardware.h>
+#include <mach/gtwx5715.h>
 #include <asm/mach/pci.h>
 
 /*
@@ -41,10 +41,10 @@
  */
 void __init gtwx5715_pci_preinit(void)
 {
-	set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQT_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQT_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQT_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQT_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index dc6725bda3c4..25c21d6665ec 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -32,12 +32,12 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/gtwx5715.h>
+#include <mach/gtwx5715.h>
 
 /*
  * Xscale UART registers are 32 bits wide with only the least
diff --git a/arch/arm/mach-ixp4xx/include/mach/avila.h b/arch/arm/mach-ixp4xx/include/mach/avila.h
new file mode 100644
index 000000000000..1640cb61972b
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/avila.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/avila.h
+ *
+ * Gateworks Avila platform specific definitions
+ *
+ * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
+ *
+ * Based on ixdp425.h
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define	AVILA_SDA_PIN		7
+#define	AVILA_SCL_PIN		6
+
+/*
+ * AVILA PCI IRQs
+ */
+#define AVILA_PCI_MAX_DEV	4
+#define LOFT_PCI_MAX_DEV    6
+#define AVILA_PCI_IRQ_LINES	4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define AVILA_PCI_INTA_PIN	11
+#define AVILA_PCI_INTB_PIN	10
+#define AVILA_PCI_INTC_PIN	9
+#define AVILA_PCI_INTD_PIN	8
+
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/coyote.h b/arch/arm/mach-ixp4xx/include/mach/coyote.h
new file mode 100644
index 000000000000..717ac6d16f55
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/coyote.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/coyote.h
+ *
+ * ADI Engineering platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define	COYOTE_PCI_SLOT0_PIN	6
+#define	COYOTE_PCI_SLOT1_PIN	11
+
+#define	COYOTE_PCI_SLOT0_DEVID	14
+#define	COYOTE_PCI_SLOT1_DEVID	15
+
+#define	COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
+#define	COYOTE_IDE_BASE_VIRT	0xFFFE1000
+#define	COYOTE_IDE_REGION_SIZE	0x1000
+
+#define	COYOTE_IDE_DATA_PORT	0xFFFE10E0
+#define	COYOTE_IDE_CTRL_PORT	0xFFFE10FC
+#define	COYOTE_IDE_ERROR_PORT	0xFFFE10E2
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/cpu.h b/arch/arm/mach-ixp4xx/include/mach/cpu.h
new file mode 100644
index 000000000000..ff8aa2393bf9
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/cpu.h
@@ -0,0 +1,46 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/cpu.h
+ *
+ * IXP4XX cpu type detection
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_CPU_H__
+#define __ASM_ARCH_CPU_H__
+
+extern unsigned int processor_id;
+/* Processor id value in CP15 Register 0 */
+#define IXP425_PROCESSOR_ID_VALUE	0x690541c0
+#define IXP435_PROCESSOR_ID_VALUE	0x69054040
+#define IXP465_PROCESSOR_ID_VALUE	0x69054200
+#define IXP4XX_PROCESSOR_ID_MASK	0xfffffff0
+
+#define cpu_is_ixp42x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+			  IXP425_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp43x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+			  IXP435_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp46x()	((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
+			  IXP465_PROCESSOR_ID_VALUE)
+
+static inline u32 ixp4xx_read_feature_bits(void)
+{
+	unsigned int val = ~*IXP4XX_EXP_CFG2;
+	val &= ~IXP4XX_FEATURE_RESERVED;
+	if (!cpu_is_ixp46x())
+		val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
+
+	return val;
+}
+
+static inline void ixp4xx_write_feature_bits(u32 value)
+{
+	*IXP4XX_EXP_CFG2 = ~value;
+}
+
+#endif  /* _ASM_ARCH_CPU_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..7c6a6912acde
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -0,0 +1,24 @@
+/* arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+                .macro  addruart,rx
+                mrc     p15, 0, \rx, c1, c0
+                tst     \rx, #1                 @ MMU enabled?
+                moveq   \rx, #0xc8000000
+                movne   \rx, #0xff000000
+		orrne	\rx, \rx, #0x00b00000
+                add     \rx,\rx,#3              @ Uart regs are at off set of 3 if
+						@ byte writes used - Big Endian.
+                .endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ixp4xx/include/mach/dma.h b/arch/arm/mach-ixp4xx/include/mach/dma.h
new file mode 100644
index 000000000000..00c5070c0201
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/dma.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/dma.h
+ *
+ * Copyright (C) 2001-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/device.h>
+#include <asm/page.h>
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET + SZ_64M)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/dsmg600.h b/arch/arm/mach-ixp4xx/include/mach/dsmg600.h
new file mode 100644
index 000000000000..dc087a34a268
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/dsmg600.h
@@ -0,0 +1,52 @@
+/*
+ * DSM-G600 platform specific definitions
+ *
+ * Copyright (C) 2006 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * based on ixdp425.h:
+ *	Copyright 2004 (C) MontaVista, Software, Inc.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define DSMG600_SDA_PIN		5
+#define DSMG600_SCL_PIN		4
+
+/*
+ * DSMG600 PCI IRQs
+ */
+#define DSMG600_PCI_MAX_DEV	4
+#define DSMG600_PCI_IRQ_LINES	3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define DSMG600_PCI_INTA_PIN	11
+#define DSMG600_PCI_INTB_PIN	10
+#define DSMG600_PCI_INTC_PIN	9
+#define DSMG600_PCI_INTD_PIN	8
+#define DSMG600_PCI_INTE_PIN	7
+#define DSMG600_PCI_INTF_PIN	6
+
+/* DSM-G600 Timer Setting */
+#define DSMG600_FREQ 66000000
+
+/* Buttons */
+
+#define DSMG600_PB_GPIO		15	/* power button */
+#define DSMG600_RB_GPIO		3	/* reset button */
+
+/* Power control */
+
+#define DSMG600_PO_GPIO		2	/* power off */
+
+/* LEDs */
+
+#define DSMG600_LED_PWR_GPIO	0
+#define DSMG600_LED_WLAN_GPIO	14
diff --git a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
new file mode 100644
index 000000000000..f2e14e94ed15
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for IXP4xx-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
+		ldr	\irqstat, [\irqstat]		@ get interrupts
+		cmp	\irqstat, #0
+		beq	1001f				@ upper IRQ?
+		clz     \irqnr, \irqstat
+		mov     \base, #31
+		sub     \irqnr, \base, \irqnr
+		b	1002f				@ lower IRQ being
+							@ handled
+
+1001:
+		/*
+		 * IXP465/IXP435 has an upper IRQ status register
+		 */
+#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
+		ldr	\irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP2_OFFSET)
+		ldr	\irqstat, [\irqstat]		@ get upper interrupts
+		mov	\irqnr, #63
+		clz	\irqstat, \irqstat
+ 		cmp	\irqstat, #32
+		subne	\irqnr, \irqnr, \irqstat
+#endif
+1002:
+		.endm
+
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/fsg.h b/arch/arm/mach-ixp4xx/include/mach/fsg.h
new file mode 100644
index 000000000000..1f02b7e22a13
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/fsg.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/fsg.h
+ *
+ * Freecom FSG-3 platform specific definitions
+ *
+ * Author: Rod Whitby <rod@whitby.id.au>
+ * Author: Tomasz Chmielewski <mangoo@wpkg.org>
+ * Maintainers: http://www.nslu2-linux.org
+ *
+ * Based on coyote.h by
+ * Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define FSG_SDA_PIN		12
+#define FSG_SCL_PIN		13
+
+/*
+ * FSG PCI IRQs
+ */
+#define FSG_PCI_MAX_DEV		3
+#define FSG_PCI_IRQ_LINES	3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define FSG_PCI_INTA_PIN	6
+#define FSG_PCI_INTB_PIN	7
+#define FSG_PCI_INTC_PIN	5
+
+/* Buttons */
+
+#define FSG_SB_GPIO		4	/* sync button */
+#define FSG_RB_GPIO		9	/* reset button */
+#define FSG_UB_GPIO		10	/* usb button */
+
+/* LEDs */
+
+#define FSG_LED_WLAN_BIT	0
+#define FSG_LED_WAN_BIT		1
+#define FSG_LED_SATA_BIT	2
+#define FSG_LED_USB_BIT		4
+#define FSG_LED_RING_BIT	5
+#define FSG_LED_SYNC_BIT	7
diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h
new file mode 100644
index 000000000000..9fbde177920f
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/gpio.h
+ *
+ * IXP4XX GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Milan Svoboda <msvoboda@ra.rockwell.com>
+ * Based on PXA implementation by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_IXP4XX_GPIO_H
+#define __ASM_ARCH_IXP4XX_GPIO_H
+
+#include <mach/hardware.h>
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+	return;
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+	gpio_line_config(gpio, IXP4XX_GPIO_IN);
+	return 0;
+}
+
+static inline int gpio_direction_output(unsigned gpio, int level)
+{
+	gpio_line_set(gpio, level);
+	gpio_line_config(gpio, IXP4XX_GPIO_OUT);
+	return 0;
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	int value;
+
+	gpio_line_get(gpio, &value);
+
+	return value;
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	gpio_line_set(gpio, value);
+}
+
+#include <asm-generic/gpio.h>			/* cansleep wrappers */
+
+extern int gpio_to_irq(int gpio);
+extern int irq_to_gpio(int gpio);
+
+#endif
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h b/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
new file mode 100644
index 000000000000..5d5e201cac7e
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
+ *
+ * Gemtek GTWX5715 Gateway (Linksys WRV54G)
+ *
+ * Copyright 2004 (c) George T. Joseph
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+#include "irqs.h"
+
+#define GTWX5715_GPIO0	0
+#define GTWX5715_GPIO1	1
+#define GTWX5715_GPIO2	2
+#define GTWX5715_GPIO3	3
+#define GTWX5715_GPIO4	4
+#define GTWX5715_GPIO5	5
+#define GTWX5715_GPIO6	6
+#define GTWX5715_GPIO7	7
+#define GTWX5715_GPIO8	8
+#define GTWX5715_GPIO9	9
+#define GTWX5715_GPIO10	10
+#define GTWX5715_GPIO11	11
+#define GTWX5715_GPIO12	12
+#define GTWX5715_GPIO13	13
+#define GTWX5715_GPIO14	14
+
+#define GTWX5715_GPIO0_IRQ			IRQ_IXP4XX_GPIO0
+#define GTWX5715_GPIO1_IRQ			IRQ_IXP4XX_GPIO1
+#define GTWX5715_GPIO2_IRQ			IRQ_IXP4XX_GPIO2
+#define GTWX5715_GPIO3_IRQ			IRQ_IXP4XX_GPIO3
+#define GTWX5715_GPIO4_IRQ			IRQ_IXP4XX_GPIO4
+#define GTWX5715_GPIO5_IRQ			IRQ_IXP4XX_GPIO5
+#define GTWX5715_GPIO6_IRQ			IRQ_IXP4XX_GPIO6
+#define GTWX5715_GPIO7_IRQ			IRQ_IXP4XX_GPIO7
+#define GTWX5715_GPIO8_IRQ			IRQ_IXP4XX_GPIO8
+#define GTWX5715_GPIO9_IRQ			IRQ_IXP4XX_GPIO9
+#define GTWX5715_GPIO10_IRQ		IRQ_IXP4XX_GPIO10
+#define GTWX5715_GPIO11_IRQ		IRQ_IXP4XX_GPIO11
+#define GTWX5715_GPIO12_IRQ		IRQ_IXP4XX_GPIO12
+#define GTWX5715_GPIO13_IRQ		IRQ_IXP4XX_SW_INT1
+#define GTWX5715_GPIO14_IRQ		IRQ_IXP4XX_SW_INT2
+
+/* PCI controller GPIO to IRQ pin mappings
+
+			INTA	INTB
+SLOT 0	10		11
+SLOT 1	11		10
+
+*/
+
+#define	GTWX5715_PCI_SLOT0_DEVID	0
+#define	GTWX5715_PCI_SLOT0_INTA_GPIO	GTWX5715_GPIO10
+#define	GTWX5715_PCI_SLOT0_INTB_GPIO	GTWX5715_GPIO11
+#define	GTWX5715_PCI_SLOT0_INTA_IRQ	GTWX5715_GPIO10_IRQ
+#define	GTWX5715_PCI_SLOT0_INTB_IRQ	GTWX5715_GPIO11_IRQ
+
+#define	GTWX5715_PCI_SLOT1_DEVID	1
+#define	GTWX5715_PCI_SLOT1_INTA_GPIO	GTWX5715_GPIO11
+#define	GTWX5715_PCI_SLOT1_INTB_GPIO	GTWX5715_GPIO10
+#define	GTWX5715_PCI_SLOT1_INTA_IRQ	GTWX5715_GPIO11_IRQ
+#define	GTWX5715_PCI_SLOT1_INTB_IRQ	GTWX5715_GPIO10_IRQ
+
+#define GTWX5715_PCI_SLOT_COUNT			2
+#define GTWX5715_PCI_INT_PIN_COUNT		2
+
+/*
+ * GPIO 5,6,7 and12 are hard wired to the Kendin KS8995M Switch
+ * and operate as an SPI type interface.  The details of the interface
+ * are available on Kendin/Micrel's web site.
+ */
+
+#define GTWX5715_KSSPI_SELECT	GTWX5715_GPIO5
+#define GTWX5715_KSSPI_TXD		GTWX5715_GPIO6
+#define GTWX5715_KSSPI_CLOCK	GTWX5715_GPIO7
+#define GTWX5715_KSSPI_RXD		GTWX5715_GPIO12
+
+/*
+ * The "reset" button is wired to GPIO 3.
+ * The GPIO is brought "low" when the button is pushed.
+ */
+
+#define GTWX5715_BUTTON_GPIO	GTWX5715_GPIO3
+#define GTWX5715_BUTTON_IRQ	GTWX5715_GPIO3_IRQ
+
+/*
+ *  Board Label      Front Label
+ *  LED1             Power
+ *  LED2             Wireless-G
+ *  LED3             not populated but could be
+ *  LED4             Internet
+ *  LED5 - LED8      Controlled by KS8995M Switch
+ *  LED9             DMZ
+ */
+
+#define GTWX5715_LED1_GPIO		GTWX5715_GPIO2
+#define GTWX5715_LED2_GPIO		GTWX5715_GPIO9
+#define GTWX5715_LED3_GPIO		GTWX5715_GPIO8
+#define GTWX5715_LED4_GPIO		GTWX5715_GPIO1
+#define GTWX5715_LED9_GPIO		GTWX5715_GPIO4
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
new file mode 100644
index 000000000000..f58a43a23966
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/hardware.h 
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/*
+ * Hardware definitions for IXP4xx based systems
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#define __ASM_ARCH_HARDWARE_H__
+
+#define PCIBIOS_MIN_IO		0x00001000
+#define PCIBIOS_MIN_MEM		(cpu_is_ixp43x() ? 0x40000000 : 0x48000000)
+
+/*
+ * We override the standard dma-mask routines for bouncing.
+ */
+#define	HAVE_ARCH_PCI_SET_DMA_MASK
+
+#define pcibios_assign_all_busses()	1
+
+/* Register locations and bits */
+#include "ixp4xx-regs.h"
+
+#ifndef __ASSEMBLER__
+#include <mach/cpu.h>
+#endif
+
+/* Platform helper functions and definitions */
+#include "platform.h"
+
+/* Platform specific details */
+#include "ixdp425.h"
+#include "avila.h"
+#include "coyote.h"
+#include "prpmc1100.h"
+#include "nslu2.h"
+#include "nas100d.h"
+#include "dsmg600.h"
+#include "fsg.h"
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
new file mode 100644
index 000000000000..319948e31bec
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -0,0 +1,569 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/io.h
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright (C) 2002-2005  MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <linux/bitops.h>
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffff0000
+
+extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data);
+extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
+
+
+/*
+ * IXP4xx provides two methods of accessing PCI memory space:
+ *
+ * 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
+ *    To access PCI via this space, we simply ioremap() the BAR
+ *    into the kernel and we can use the standard read[bwl]/write[bwl]
+ *    macros. This is the preffered method due to speed but it
+ *    limits the system to just 64MB of PCI memory. This can be 
+ *    problamatic if using video cards and other memory-heavy
+ *    targets.
+ *
+ * 2) If > 64MB of memory space is required, the IXP4xx can be configured
+ *    to use indirect registers to access PCI (as we do below for I/O
+ *    transactions). This allows for up to 128MB (0x48000000 to 0x4fffffff)
+ *    of memory on the bus. The disadvantage of this is that every 
+ *    PCI access requires three local register accesses plus a spinlock,
+ *    but in some cases the performance hit is acceptable. In addition,
+ *    you cannot mmap() PCI devices in this case.
+ *
+ */
+#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
+
+#define __mem_pci(a)		(a)
+
+#else
+
+#include <linux/mm.h>
+
+/*
+ * In the case of using indirect PCI, we simply return the actual PCI
+ * address and our read/write implementation use that to drive the 
+ * access registers. If something outside of PCI is ioremap'd, we
+ * fallback to the default.
+ */
+static inline void __iomem *
+__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype)
+{
+	if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff))
+		return __arm_ioremap(addr, size, mtype);
+
+	return (void __iomem *)addr;
+}
+
+static inline void
+__ixp4xx_iounmap(void __iomem *addr)
+{
+	if ((__force u32)addr >= VMALLOC_START)
+		__iounmap(addr);
+}
+
+#define __arch_ioremap(a, s, f)		__ixp4xx_ioremap(a, s, f)
+#define	__arch_iounmap(a)		__ixp4xx_iounmap(a)
+
+#define	writeb(v, p)			__ixp4xx_writeb(v, p)
+#define	writew(v, p)			__ixp4xx_writew(v, p)
+#define	writel(v, p)			__ixp4xx_writel(v, p)
+
+#define	writesb(p, v, l)		__ixp4xx_writesb(p, v, l)
+#define	writesw(p, v, l)		__ixp4xx_writesw(p, v, l)
+#define	writesl(p, v, l)		__ixp4xx_writesl(p, v, l)
+	
+#define	readb(p)			__ixp4xx_readb(p)
+#define	readw(p)			__ixp4xx_readw(p)
+#define	readl(p)			__ixp4xx_readl(p)
+	
+#define	readsb(p, v, l)			__ixp4xx_readsb(p, v, l)
+#define	readsw(p, v, l)			__ixp4xx_readsw(p, v, l)
+#define	readsl(p, v, l)			__ixp4xx_readsl(p, v, l)
+
+static inline void 
+__ixp4xx_writeb(u8 value, volatile void __iomem *p)
+{
+	u32 addr = (u32)p;
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START) {
+		__raw_writeb(value, addr);
+		return;
+	}
+
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
+}
+
+static inline void
+__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count)
+{
+	while (count--)
+		writeb(*vaddr++, bus_addr);
+}
+
+static inline void 
+__ixp4xx_writew(u16 value, volatile void __iomem *p)
+{
+	u32 addr = (u32)p;
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START) {
+		__raw_writew(value, addr);
+		return;
+	}
+
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
+}
+
+static inline void
+__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count)
+{
+	while (count--)
+		writew(*vaddr++, bus_addr);
+}
+
+static inline void 
+__ixp4xx_writel(u32 value, volatile void __iomem *p)
+{
+	u32 addr = (__force u32)p;
+	if (addr >= VMALLOC_START) {
+		__raw_writel(value, p);
+		return;
+	}
+
+	ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
+}
+
+static inline void
+__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count)
+{
+	while (count--)
+		writel(*vaddr++, bus_addr);
+}
+
+static inline unsigned char 
+__ixp4xx_readb(const volatile void __iomem *p)
+{
+	u32 addr = (u32)p;
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START)
+		return __raw_readb(addr);
+
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
+		return 0xff;
+
+	return data >> (8*n);
+}
+
+static inline void
+__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = readb(bus_addr);
+}
+
+static inline unsigned short 
+__ixp4xx_readw(const volatile void __iomem *p)
+{
+	u32 addr = (u32)p;
+	u32 n, byte_enables, data;
+
+	if (addr >= VMALLOC_START)
+		return __raw_readw(addr);
+
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data))
+		return 0xffff;
+
+	return data>>(8*n);
+}
+
+static inline void 
+__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = readw(bus_addr);
+}
+
+static inline unsigned long 
+__ixp4xx_readl(const volatile void __iomem *p)
+{
+	u32 addr = (__force u32)p;
+	u32 data;
+
+	if (addr >= VMALLOC_START)
+		return __raw_readl(p);
+
+	if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
+		return 0xffffffff;
+
+	return data;
+}
+
+static inline void 
+__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = readl(bus_addr);
+}
+
+
+/*
+ * We can use the built-in functions b/c they end up calling writeb/readb
+ */
+#define memset_io(c,v,l)		_memset_io((c),(v),(l))
+#define memcpy_fromio(a,c,l)		_memcpy_fromio((a),(c),(l))
+#define memcpy_toio(c,a,l)		_memcpy_toio((c),(a),(l))
+
+#endif
+
+#ifndef CONFIG_PCI
+
+#define	__io(v)		v
+
+#else
+
+/*
+ * IXP4xx does not have a transparent cpu -> PCI I/O translation
+ * window.  Instead, it has a set of registers that must be tweaked
+ * with the proper byte lanes, command types, and address for the
+ * transaction.  This means that we need to override the default
+ * I/O functions.
+ */
+#define	outb(p, v)			__ixp4xx_outb(p, v)
+#define	outw(p, v)			__ixp4xx_outw(p, v)
+#define	outl(p, v)			__ixp4xx_outl(p, v)
+	
+#define	outsb(p, v, l)			__ixp4xx_outsb(p, v, l)
+#define	outsw(p, v, l)			__ixp4xx_outsw(p, v, l)
+#define	outsl(p, v, l)			__ixp4xx_outsl(p, v, l)
+
+#define	inb(p)				__ixp4xx_inb(p)
+#define	inw(p)				__ixp4xx_inw(p)
+#define	inl(p)				__ixp4xx_inl(p)
+
+#define	insb(p, v, l)			__ixp4xx_insb(p, v, l)
+#define	insw(p, v, l)			__ixp4xx_insw(p, v, l)
+#define	insl(p, v, l)			__ixp4xx_insl(p, v, l)
+
+
+static inline void 
+__ixp4xx_outb(u8 value, u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
+}
+
+static inline void 
+__ixp4xx_outsb(u32 io_addr, const u8 *vaddr, u32 count)
+{
+	while (count--)
+		outb(*vaddr++, io_addr);
+}
+
+static inline void 
+__ixp4xx_outw(u16 value, u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	data = value << (8*n);
+	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
+}
+
+static inline void 
+__ixp4xx_outsw(u32 io_addr, const u16 *vaddr, u32 count)
+{
+	while (count--)
+		outw(cpu_to_le16(*vaddr++), io_addr);
+}
+
+static inline void 
+__ixp4xx_outl(u32 value, u32 addr)
+{
+	ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
+}
+
+static inline void 
+__ixp4xx_outsl(u32 io_addr, const u32 *vaddr, u32 count)
+{
+	while (count--)
+		outl(*vaddr++, io_addr);
+}
+
+static inline u8 
+__ixp4xx_inb(u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
+		return 0xff;
+
+	return data >> (8*n);
+}
+
+static inline void 
+__ixp4xx_insb(u32 io_addr, u8 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = inb(io_addr);
+}
+
+static inline u16 
+__ixp4xx_inw(u32 addr)
+{
+	u32 n, byte_enables, data;
+	n = addr % 4;
+	byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
+	if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data))
+		return 0xffff;
+
+	return data>>(8*n);
+}
+
+static inline void 
+__ixp4xx_insw(u32 io_addr, u16 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = le16_to_cpu(inw(io_addr));
+}
+
+static inline u32 
+__ixp4xx_inl(u32 addr)
+{
+	u32 data;
+	if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
+		return 0xffffffff;
+
+	return data;
+}
+
+static inline void 
+__ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count)
+{
+	while (count--)
+		*vaddr++ = inl(io_addr);
+}
+
+#define PIO_OFFSET      0x10000UL
+#define PIO_MASK        0x0ffffUL
+
+#define	__is_io_address(p)	(((unsigned long)p >= PIO_OFFSET) && \
+					((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
+static inline unsigned int
+__ixp4xx_ioread8(const void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		return	(unsigned int)__ixp4xx_inb(port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		return (unsigned int)__raw_readb(port);
+#else
+		return (unsigned int)__ixp4xx_readb(addr);
+#endif
+}
+
+static inline void
+__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_insb(port & PIO_MASK, vaddr, count);
+	else
+#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_readsb(addr, vaddr, count);
+#else
+		__ixp4xx_readsb(addr, vaddr, count);
+#endif
+}
+
+static inline unsigned int
+__ixp4xx_ioread16(const void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		return	(unsigned int)__ixp4xx_inw(port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		return le16_to_cpu(__raw_readw((u32)port));
+#else
+		return (unsigned int)__ixp4xx_readw(addr);
+#endif
+}
+
+static inline void
+__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_insw(port & PIO_MASK, vaddr, count);
+	else
+#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_readsw(addr, vaddr, count);
+#else
+		__ixp4xx_readsw(addr, vaddr, count);
+#endif
+}
+
+static inline unsigned int
+__ixp4xx_ioread32(const void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		return	(unsigned int)__ixp4xx_inl(port & PIO_MASK);
+	else {
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		return le32_to_cpu((__force __le32)__raw_readl(addr));
+#else
+		return (unsigned int)__ixp4xx_readl(addr);
+#endif
+	}
+}
+
+static inline void
+__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_insl(port & PIO_MASK, vaddr, count);
+	else
+#ifndef	CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_readsl(addr, vaddr, count);
+#else
+		__ixp4xx_readsl(addr, vaddr, count);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite8(u8 value, void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outb(value, port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writeb(value, port);
+#else
+		__ixp4xx_writeb(value, addr);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite8_rep(void __iomem *addr, const void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outsb(port & PIO_MASK, vaddr, count);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writesb(addr, vaddr, count);
+#else
+		__ixp4xx_writesb(addr, vaddr, count);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite16(u16 value, void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outw(value, port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writew(cpu_to_le16(value), addr);
+#else
+		__ixp4xx_writew(value, addr);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite16_rep(void __iomem *addr, const void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outsw(port & PIO_MASK, vaddr, count);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writesw(addr, vaddr, count);
+#else
+		__ixp4xx_writesw(addr, vaddr, count);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite32(u32 value, void __iomem *addr)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outl(value, port & PIO_MASK);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writel((u32 __force)cpu_to_le32(value), addr);
+#else
+		__ixp4xx_writel(value, addr);
+#endif
+}
+
+static inline void
+__ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count)
+{
+	unsigned long port = (unsigned long __force)addr;
+	if (__is_io_address(port))
+		__ixp4xx_outsl(port & PIO_MASK, vaddr, count);
+	else
+#ifndef CONFIG_IXP4XX_INDIRECT_PCI
+		__raw_writesl(addr, vaddr, count);
+#else
+		__ixp4xx_writesl(addr, vaddr, count);
+#endif
+}
+
+#define	ioread8(p)			__ixp4xx_ioread8(p)
+#define	ioread16(p)			__ixp4xx_ioread16(p)
+#define	ioread32(p)			__ixp4xx_ioread32(p)
+
+#define	ioread8_rep(p, v, c)		__ixp4xx_ioread8_rep(p, v, c)
+#define	ioread16_rep(p, v, c)		__ixp4xx_ioread16_rep(p, v, c)
+#define	ioread32_rep(p, v, c)		__ixp4xx_ioread32_rep(p, v, c)
+
+#define	iowrite8(v,p)			__ixp4xx_iowrite8(v,p)
+#define	iowrite16(v,p)			__ixp4xx_iowrite16(v,p)
+#define	iowrite32(v,p)			__ixp4xx_iowrite32(v,p)
+
+#define	iowrite8_rep(p, v, c)		__ixp4xx_iowrite8_rep(p, v, c)
+#define	iowrite16_rep(p, v, c)		__ixp4xx_iowrite16_rep(p, v, c)
+#define	iowrite32_rep(p, v, c)		__ixp4xx_iowrite32_rep(p, v, c)
+
+#define	ioport_map(port, nr)		((void __iomem*)(port + PIO_OFFSET))
+#define	ioport_unmap(addr)
+#endif	// !CONFIG_PCI
+
+#endif	//  __ASM_ARM_ARCH_IO_H
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/irqs.h b/arch/arm/mach-ixp4xx/include/mach/irqs.h
new file mode 100644
index 000000000000..f4d74de1566a
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/irqs.h
@@ -0,0 +1,138 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/irqs.h 
+ *
+ * IRQ definitions for IXP4XX based systems
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ARCH_IXP4XX_IRQS_H_
+#define _ARCH_IXP4XX_IRQS_H_
+
+
+#define IRQ_IXP4XX_NPEA		0
+#define IRQ_IXP4XX_NPEB		1
+#define IRQ_IXP4XX_NPEC		2
+#define IRQ_IXP4XX_QM1		3
+#define IRQ_IXP4XX_QM2		4
+#define IRQ_IXP4XX_TIMER1	5
+#define IRQ_IXP4XX_GPIO0	6
+#define IRQ_IXP4XX_GPIO1	7
+#define IRQ_IXP4XX_PCI_INT	8
+#define IRQ_IXP4XX_PCI_DMA1	9
+#define IRQ_IXP4XX_PCI_DMA2	10
+#define IRQ_IXP4XX_TIMER2	11
+#define IRQ_IXP4XX_USB		12
+#define IRQ_IXP4XX_UART2	13
+#define IRQ_IXP4XX_TIMESTAMP	14
+#define IRQ_IXP4XX_UART1	15
+#define IRQ_IXP4XX_WDOG		16
+#define IRQ_IXP4XX_AHB_PMU	17
+#define IRQ_IXP4XX_XSCALE_PMU	18
+#define IRQ_IXP4XX_GPIO2	19
+#define IRQ_IXP4XX_GPIO3	20
+#define IRQ_IXP4XX_GPIO4	21
+#define IRQ_IXP4XX_GPIO5	22
+#define IRQ_IXP4XX_GPIO6	23
+#define IRQ_IXP4XX_GPIO7	24
+#define IRQ_IXP4XX_GPIO8	25
+#define IRQ_IXP4XX_GPIO9	26
+#define IRQ_IXP4XX_GPIO10	27
+#define IRQ_IXP4XX_GPIO11	28
+#define IRQ_IXP4XX_GPIO12	29
+#define IRQ_IXP4XX_SW_INT1	30
+#define IRQ_IXP4XX_SW_INT2	31
+#define IRQ_IXP4XX_USB_HOST	32
+#define IRQ_IXP4XX_I2C		33
+#define IRQ_IXP4XX_SSP		34
+#define IRQ_IXP4XX_TSYNC	35
+#define IRQ_IXP4XX_EAU_DONE	36
+#define IRQ_IXP4XX_SHA_DONE	37
+#define IRQ_IXP4XX_SWCP_PE	58
+#define IRQ_IXP4XX_QM_PE	60
+#define IRQ_IXP4XX_MCU_ECC	61
+#define IRQ_IXP4XX_EXP_PE	62
+
+/*
+ * Only first 32 sources are valid if running on IXP42x systems
+ */
+#if defined(CONFIG_CPU_IXP46X) || defined(CONFIG_CPU_IXP43X)
+#define NR_IRQS			64
+#else
+#define NR_IRQS			32
+#endif
+
+#define	XSCALE_PMU_IRQ		(IRQ_IXP4XX_XSCALE_PMU)
+
+/*
+ * IXDP425 board IRQs
+ */
+#define	IRQ_IXDP425_PCI_INTA	IRQ_IXP4XX_GPIO11
+#define	IRQ_IXDP425_PCI_INTB	IRQ_IXP4XX_GPIO10
+#define	IRQ_IXDP425_PCI_INTC	IRQ_IXP4XX_GPIO9
+#define	IRQ_IXDP425_PCI_INTD	IRQ_IXP4XX_GPIO8
+
+/*
+ * Gateworks Avila board IRQs
+ */
+#define	IRQ_AVILA_PCI_INTA	IRQ_IXP4XX_GPIO11
+#define	IRQ_AVILA_PCI_INTB	IRQ_IXP4XX_GPIO10
+#define	IRQ_AVILA_PCI_INTC	IRQ_IXP4XX_GPIO9
+#define	IRQ_AVILA_PCI_INTD	IRQ_IXP4XX_GPIO8
+
+
+/*
+ * PrPMC1100 Board IRQs
+ */
+#define	IRQ_PRPMC1100_PCI_INTA	IRQ_IXP4XX_GPIO11
+#define	IRQ_PRPMC1100_PCI_INTB	IRQ_IXP4XX_GPIO10
+#define	IRQ_PRPMC1100_PCI_INTC	IRQ_IXP4XX_GPIO9
+#define	IRQ_PRPMC1100_PCI_INTD	IRQ_IXP4XX_GPIO8
+
+/*
+ * ADI Coyote Board IRQs
+ */
+#define	IRQ_COYOTE_PCI_SLOT0	IRQ_IXP4XX_GPIO6
+#define	IRQ_COYOTE_PCI_SLOT1	IRQ_IXP4XX_GPIO11
+#define	IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
+
+/*
+ * NSLU2 board IRQs
+ */
+#define        IRQ_NSLU2_PCI_INTA      IRQ_IXP4XX_GPIO11
+#define        IRQ_NSLU2_PCI_INTB      IRQ_IXP4XX_GPIO10
+#define        IRQ_NSLU2_PCI_INTC      IRQ_IXP4XX_GPIO9
+
+/*
+ * NAS100D board IRQs
+ */
+#define        IRQ_NAS100D_PCI_INTA    IRQ_IXP4XX_GPIO11
+#define        IRQ_NAS100D_PCI_INTB    IRQ_IXP4XX_GPIO10
+#define        IRQ_NAS100D_PCI_INTC    IRQ_IXP4XX_GPIO9
+#define        IRQ_NAS100D_PCI_INTD    IRQ_IXP4XX_GPIO8
+#define        IRQ_NAS100D_PCI_INTE    IRQ_IXP4XX_GPIO7
+
+/*
+ * D-Link DSM-G600 RevA board IRQs
+ */
+#define        IRQ_DSMG600_PCI_INTA    IRQ_IXP4XX_GPIO11
+#define        IRQ_DSMG600_PCI_INTB    IRQ_IXP4XX_GPIO10
+#define        IRQ_DSMG600_PCI_INTC    IRQ_IXP4XX_GPIO9
+#define        IRQ_DSMG600_PCI_INTD    IRQ_IXP4XX_GPIO8
+#define        IRQ_DSMG600_PCI_INTE    IRQ_IXP4XX_GPIO7
+#define        IRQ_DSMG600_PCI_INTF    IRQ_IXP4XX_GPIO6
+
+/*
+ * Freecom FSG-3 Board IRQs
+ */
+#define        IRQ_FSG_PCI_INTA        IRQ_IXP4XX_GPIO6
+#define        IRQ_FSG_PCI_INTB        IRQ_IXP4XX_GPIO7
+#define        IRQ_FSG_PCI_INTC        IRQ_IXP4XX_GPIO5
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixdp425.h b/arch/arm/mach-ixp4xx/include/mach/ixdp425.h
new file mode 100644
index 000000000000..2cafe65ebfee
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/ixdp425.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/ixdp425.h
+ *
+ * IXDP425 platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define	IXDP425_SDA_PIN		7
+#define	IXDP425_SCL_PIN		6
+
+/*
+ * IXDP425 PCI IRQs
+ */
+#define IXDP425_PCI_MAX_DEV	4
+#define IXDP425_PCI_IRQ_LINES	4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define IXDP425_PCI_INTA_PIN	11
+#define IXDP425_PCI_INTB_PIN	10
+#define	IXDP425_PCI_INTC_PIN	9
+#define	IXDP425_PCI_INTD_PIN	8
+
+/* NAND Flash pins */
+#define	IXDP425_NAND_NCE_PIN	12
+
+#define	IXDP425_NAND_CMD_BYTE	0x01
+#define	IXDP425_NAND_ADDR_BYTE	0x02
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
new file mode 100644
index 000000000000..ad9c888dd850
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
@@ -0,0 +1,638 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h
+ *
+ * Register definitions for IXP4xx chipset. This file contains 
+ * register location and bit definitions only. Platform specific 
+ * definitions and helper function declarations are in platform.h 
+ * and machine-name.h.
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ASM_ARM_IXP4XX_H_
+#define _ASM_ARM_IXP4XX_H_
+
+/*
+ * IXP4xx Linux Memory Map:
+ *
+ * Phy		Size		Virt		Description
+ * =========================================================================
+ *
+ * 0x00000000	0x10000000(max)	PAGE_OFFSET	System RAM
+ *
+ * 0x48000000	0x04000000	ioremap'd	PCI Memory Space
+ *
+ * 0x50000000	0x10000000	ioremap'd	EXP BUS
+ *
+ * 0x6000000	0x00004000	ioremap'd	QMgr
+ *
+ * 0xC0000000	0x00001000	0xffbff000	PCI CFG
+ *
+ * 0xC4000000	0x00001000	0xffbfe000	EXP CFG
+ *
+ * 0xC8000000	0x00013000	0xffbeb000	On-Chip Peripherals
+ */
+
+/*
+ * Queue Manager
+ */
+#define IXP4XX_QMGR_BASE_PHYS		(0x60000000)
+#define IXP4XX_QMGR_REGION_SIZE		(0x00004000)
+
+/*
+ * Expansion BUS Configuration registers
+ */
+#define IXP4XX_EXP_CFG_BASE_PHYS	(0xC4000000)
+#define IXP4XX_EXP_CFG_BASE_VIRT	(0xFFBFE000)
+#define IXP4XX_EXP_CFG_REGION_SIZE	(0x00001000)
+
+/*
+ * PCI Config registers
+ */
+#define IXP4XX_PCI_CFG_BASE_PHYS	(0xC0000000)
+#define	IXP4XX_PCI_CFG_BASE_VIRT	(0xFFBFF000)
+#define IXP4XX_PCI_CFG_REGION_SIZE	(0x00001000)
+
+/*
+ * Peripheral space
+ */
+#define IXP4XX_PERIPHERAL_BASE_PHYS	(0xC8000000)
+#define IXP4XX_PERIPHERAL_BASE_VIRT	(0xFFBEB000)
+#define IXP4XX_PERIPHERAL_REGION_SIZE	(0x00013000)
+
+/*
+ * Debug UART
+ *
+ * This is basically a remap of UART1 into a region that is section
+ * aligned so that it * can be used with the low-level debug code.
+ */
+#define	IXP4XX_DEBUG_UART_BASE_PHYS	(0xC8000000)
+#define	IXP4XX_DEBUG_UART_BASE_VIRT	(0xffb00000)
+#define	IXP4XX_DEBUG_UART_REGION_SIZE	(0x00001000)
+
+#define IXP4XX_EXP_CS0_OFFSET	0x00
+#define IXP4XX_EXP_CS1_OFFSET   0x04
+#define IXP4XX_EXP_CS2_OFFSET   0x08
+#define IXP4XX_EXP_CS3_OFFSET   0x0C
+#define IXP4XX_EXP_CS4_OFFSET   0x10
+#define IXP4XX_EXP_CS5_OFFSET   0x14
+#define IXP4XX_EXP_CS6_OFFSET   0x18
+#define IXP4XX_EXP_CS7_OFFSET   0x1C
+#define IXP4XX_EXP_CFG0_OFFSET	0x20
+#define IXP4XX_EXP_CFG1_OFFSET	0x24
+#define IXP4XX_EXP_CFG2_OFFSET	0x28
+#define IXP4XX_EXP_CFG3_OFFSET	0x2C
+
+/*
+ * Expansion Bus Controller registers.
+ */
+#define IXP4XX_EXP_REG(x) ((volatile u32 *)(IXP4XX_EXP_CFG_BASE_VIRT+(x)))
+
+#define IXP4XX_EXP_CS0      IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET)
+#define IXP4XX_EXP_CS1      IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET)
+#define IXP4XX_EXP_CS2      IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET) 
+#define IXP4XX_EXP_CS3      IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET)
+#define IXP4XX_EXP_CS4      IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET)
+#define IXP4XX_EXP_CS5      IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET)
+#define IXP4XX_EXP_CS6      IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET)     
+#define IXP4XX_EXP_CS7      IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET)
+
+#define IXP4XX_EXP_CFG0     IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET) 
+#define IXP4XX_EXP_CFG1     IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET) 
+#define IXP4XX_EXP_CFG2     IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET) 
+#define IXP4XX_EXP_CFG3     IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET)
+
+
+/*
+ * Peripheral Space Register Region Base Addresses
+ */
+#define IXP4XX_UART1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000)
+#define IXP4XX_UART2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000)
+#define IXP4XX_PMU_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000)
+#define IXP4XX_INTC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000)
+#define IXP4XX_GPIO_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000)
+#define IXP4XX_TIMER_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000)
+#define IXP4XX_NPEA_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000)
+#define IXP4XX_NPEB_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000)
+#define IXP4XX_NPEC_BASE_PHYS   	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000)
+#define IXP4XX_EthB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000)
+#define IXP4XX_EthC_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000)
+#define IXP4XX_USB_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000)
+/* ixp46X only */
+#define IXP4XX_EthA_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000)
+#define IXP4XX_EthB1_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000)
+#define IXP4XX_EthB2_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000)
+#define IXP4XX_EthB3_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000)
+#define IXP4XX_TIMESYNC_BASE_PHYS	(IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000)
+#define IXP4XX_I2C_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000)
+#define IXP4XX_SSP_BASE_PHYS		(IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000)
+
+
+#define IXP4XX_UART1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000)
+#define IXP4XX_UART2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000)
+#define IXP4XX_PMU_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000)
+#define IXP4XX_INTC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000)
+#define IXP4XX_GPIO_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000)
+#define IXP4XX_TIMER_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000)
+#define IXP4XX_NPEA_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x6000)
+#define IXP4XX_NPEB_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x7000)
+#define IXP4XX_NPEC_BASE_VIRT   	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x8000)
+#define IXP4XX_EthB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000)
+#define IXP4XX_EthC_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000)
+#define IXP4XX_USB_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000)
+/* ixp46X only */
+#define IXP4XX_EthA_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000)
+#define IXP4XX_EthB1_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000)
+#define IXP4XX_EthB2_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000)
+#define IXP4XX_EthB3_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000)
+#define IXP4XX_TIMESYNC_BASE_VIRT	(IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000)
+#define IXP4XX_I2C_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000)
+#define IXP4XX_SSP_BASE_VIRT		(IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000)
+
+/*
+ * Constants to make it easy to access  Interrupt Controller registers
+ */
+#define IXP4XX_ICPR_OFFSET	0x00 /* Interrupt Status */
+#define IXP4XX_ICMR_OFFSET	0x04 /* Interrupt Enable */
+#define IXP4XX_ICLR_OFFSET	0x08 /* Interrupt IRQ/FIQ Select */
+#define IXP4XX_ICIP_OFFSET      0x0C /* IRQ Status */
+#define IXP4XX_ICFP_OFFSET	0x10 /* FIQ Status */
+#define IXP4XX_ICHR_OFFSET	0x14 /* Interrupt Priority */
+#define IXP4XX_ICIH_OFFSET	0x18 /* IRQ Highest Pri Int */
+#define IXP4XX_ICFH_OFFSET	0x1C /* FIQ Highest Pri Int */
+
+/*
+ * IXP465-only
+ */
+#define	IXP4XX_ICPR2_OFFSET	0x20 /* Interrupt Status 2 */
+#define	IXP4XX_ICMR2_OFFSET	0x24 /* Interrupt Enable 2 */
+#define	IXP4XX_ICLR2_OFFSET	0x28 /* Interrupt IRQ/FIQ Select 2 */
+#define IXP4XX_ICIP2_OFFSET     0x2C /* IRQ Status */
+#define IXP4XX_ICFP2_OFFSET	0x30 /* FIQ Status */
+#define IXP4XX_ICEEN_OFFSET	0x34 /* Error High Pri Enable */
+
+
+/*
+ * Interrupt Controller Register Definitions.
+ */
+
+#define IXP4XX_INTC_REG(x) ((volatile u32 *)(IXP4XX_INTC_BASE_VIRT+(x)))
+
+#define IXP4XX_ICPR	IXP4XX_INTC_REG(IXP4XX_ICPR_OFFSET)
+#define IXP4XX_ICMR     IXP4XX_INTC_REG(IXP4XX_ICMR_OFFSET)
+#define IXP4XX_ICLR     IXP4XX_INTC_REG(IXP4XX_ICLR_OFFSET)
+#define IXP4XX_ICIP     IXP4XX_INTC_REG(IXP4XX_ICIP_OFFSET)
+#define IXP4XX_ICFP     IXP4XX_INTC_REG(IXP4XX_ICFP_OFFSET)
+#define IXP4XX_ICHR     IXP4XX_INTC_REG(IXP4XX_ICHR_OFFSET)
+#define IXP4XX_ICIH     IXP4XX_INTC_REG(IXP4XX_ICIH_OFFSET) 
+#define IXP4XX_ICFH     IXP4XX_INTC_REG(IXP4XX_ICFH_OFFSET)
+#define IXP4XX_ICPR2	IXP4XX_INTC_REG(IXP4XX_ICPR2_OFFSET)
+#define IXP4XX_ICMR2    IXP4XX_INTC_REG(IXP4XX_ICMR2_OFFSET)
+#define IXP4XX_ICLR2    IXP4XX_INTC_REG(IXP4XX_ICLR2_OFFSET)
+#define IXP4XX_ICIP2    IXP4XX_INTC_REG(IXP4XX_ICIP2_OFFSET)
+#define IXP4XX_ICFP2    IXP4XX_INTC_REG(IXP4XX_ICFP2_OFFSET)
+#define IXP4XX_ICEEN    IXP4XX_INTC_REG(IXP4XX_ICEEN_OFFSET)
+                                                                                
+/*
+ * Constants to make it easy to access GPIO registers
+ */
+#define IXP4XX_GPIO_GPOUTR_OFFSET       0x00
+#define IXP4XX_GPIO_GPOER_OFFSET        0x04
+#define IXP4XX_GPIO_GPINR_OFFSET        0x08
+#define IXP4XX_GPIO_GPISR_OFFSET        0x0C
+#define IXP4XX_GPIO_GPIT1R_OFFSET	0x10
+#define IXP4XX_GPIO_GPIT2R_OFFSET	0x14
+#define IXP4XX_GPIO_GPCLKR_OFFSET	0x18
+#define IXP4XX_GPIO_GPDBSELR_OFFSET	0x1C
+
+/* 
+ * GPIO Register Definitions.
+ * [Only perform 32bit reads/writes]
+ */
+#define IXP4XX_GPIO_REG(x) ((volatile u32 *)(IXP4XX_GPIO_BASE_VIRT+(x)))
+
+#define IXP4XX_GPIO_GPOUTR	IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOUTR_OFFSET)
+#define IXP4XX_GPIO_GPOER       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPOER_OFFSET)
+#define IXP4XX_GPIO_GPINR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPINR_OFFSET)
+#define IXP4XX_GPIO_GPISR       IXP4XX_GPIO_REG(IXP4XX_GPIO_GPISR_OFFSET)
+#define IXP4XX_GPIO_GPIT1R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT1R_OFFSET)
+#define IXP4XX_GPIO_GPIT2R      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPIT2R_OFFSET)
+#define IXP4XX_GPIO_GPCLKR      IXP4XX_GPIO_REG(IXP4XX_GPIO_GPCLKR_OFFSET)
+#define IXP4XX_GPIO_GPDBSELR    IXP4XX_GPIO_REG(IXP4XX_GPIO_GPDBSELR_OFFSET)
+
+/*
+ * GPIO register bit definitions
+ */
+
+/* Interrupt styles
+ */
+#define IXP4XX_GPIO_STYLE_ACTIVE_HIGH	0x0
+#define IXP4XX_GPIO_STYLE_ACTIVE_LOW	0x1
+#define IXP4XX_GPIO_STYLE_RISING_EDGE	0x2
+#define IXP4XX_GPIO_STYLE_FALLING_EDGE	0x3
+#define IXP4XX_GPIO_STYLE_TRANSITIONAL	0x4
+
+/* 
+ * Mask used to clear interrupt styles 
+ */
+#define IXP4XX_GPIO_STYLE_CLEAR		0x7
+#define IXP4XX_GPIO_STYLE_SIZE		3
+
+/*
+ * Constants to make it easy to access Timer Control/Status registers
+ */
+#define IXP4XX_OSTS_OFFSET	0x00  /* Continious TimeStamp */
+#define IXP4XX_OST1_OFFSET	0x04  /* Timer 1 Timestamp */
+#define IXP4XX_OSRT1_OFFSET	0x08  /* Timer 1 Reload */
+#define IXP4XX_OST2_OFFSET	0x0C  /* Timer 2 Timestamp */
+#define IXP4XX_OSRT2_OFFSET	0x10  /* Timer 2 Reload */
+#define IXP4XX_OSWT_OFFSET	0x14  /* Watchdog Timer */
+#define IXP4XX_OSWE_OFFSET	0x18  /* Watchdog Enable */
+#define IXP4XX_OSWK_OFFSET	0x1C  /* Watchdog Key */
+#define IXP4XX_OSST_OFFSET	0x20  /* Timer Status */
+
+/*
+ * Operating System Timer Register Definitions.
+ */
+
+#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x)))
+
+#define IXP4XX_OSTS	IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET)
+#define IXP4XX_OST1	IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET)
+#define IXP4XX_OSRT1	IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET)
+#define IXP4XX_OST2	IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET)
+#define IXP4XX_OSRT2	IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET)
+#define IXP4XX_OSWT	IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET)
+#define IXP4XX_OSWE	IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET)
+#define IXP4XX_OSWK	IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET)
+#define IXP4XX_OSST	IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET)
+
+/*
+ * Timer register values and bit definitions 
+ */
+#define IXP4XX_OST_ENABLE		0x00000001
+#define IXP4XX_OST_ONE_SHOT		0x00000002
+/* Low order bits of reload value ignored */
+#define IXP4XX_OST_RELOAD_MASK		0x00000003
+#define IXP4XX_OST_DISABLED		0x00000000
+#define IXP4XX_OSST_TIMER_1_PEND	0x00000001
+#define IXP4XX_OSST_TIMER_2_PEND	0x00000002
+#define IXP4XX_OSST_TIMER_TS_PEND	0x00000004
+#define IXP4XX_OSST_TIMER_WDOG_PEND	0x00000008
+#define IXP4XX_OSST_TIMER_WARM_RESET	0x00000010
+
+#define	IXP4XX_WDT_KEY			0x0000482E
+
+#define	IXP4XX_WDT_RESET_ENABLE		0x00000001
+#define	IXP4XX_WDT_IRQ_ENABLE		0x00000002
+#define	IXP4XX_WDT_COUNT_ENABLE		0x00000004
+
+
+/*
+ * Constants to make it easy to access PCI Control/Status registers
+ */
+#define PCI_NP_AD_OFFSET            0x00
+#define PCI_NP_CBE_OFFSET           0x04
+#define PCI_NP_WDATA_OFFSET         0x08
+#define PCI_NP_RDATA_OFFSET         0x0c
+#define PCI_CRP_AD_CBE_OFFSET       0x10
+#define PCI_CRP_WDATA_OFFSET        0x14
+#define PCI_CRP_RDATA_OFFSET        0x18
+#define PCI_CSR_OFFSET              0x1c
+#define PCI_ISR_OFFSET              0x20
+#define PCI_INTEN_OFFSET            0x24
+#define PCI_DMACTRL_OFFSET          0x28
+#define PCI_AHBMEMBASE_OFFSET       0x2c
+#define PCI_AHBIOBASE_OFFSET        0x30
+#define PCI_PCIMEMBASE_OFFSET       0x34
+#define PCI_AHBDOORBELL_OFFSET      0x38
+#define PCI_PCIDOORBELL_OFFSET      0x3C
+#define PCI_ATPDMA0_AHBADDR_OFFSET  0x40
+#define PCI_ATPDMA0_PCIADDR_OFFSET  0x44
+#define PCI_ATPDMA0_LENADDR_OFFSET  0x48
+#define PCI_ATPDMA1_AHBADDR_OFFSET  0x4C
+#define PCI_ATPDMA1_PCIADDR_OFFSET  0x50
+#define PCI_ATPDMA1_LENADDR_OFFSET	0x54
+
+/*
+ * PCI Control/Status Registers
+ */
+#define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
+
+#define PCI_NP_AD               IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
+#define PCI_NP_CBE              IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
+#define PCI_NP_WDATA            IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
+#define PCI_NP_RDATA            IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
+#define PCI_CRP_AD_CBE          IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
+#define PCI_CRP_WDATA           IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
+#define PCI_CRP_RDATA           IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
+#define PCI_CSR                 IXP4XX_PCI_CSR(PCI_CSR_OFFSET) 
+#define PCI_ISR                 IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
+#define PCI_INTEN               IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
+#define PCI_DMACTRL             IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
+#define PCI_AHBMEMBASE          IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
+#define PCI_AHBIOBASE           IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
+#define PCI_PCIMEMBASE          IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
+#define PCI_AHBDOORBELL         IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
+#define PCI_PCIDOORBELL         IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
+#define PCI_ATPDMA0_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
+#define PCI_ATPDMA0_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
+#define PCI_ATPDMA0_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
+#define PCI_ATPDMA1_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
+#define PCI_ATPDMA1_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
+#define PCI_ATPDMA1_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
+
+/*
+ * PCI register values and bit definitions 
+ */
+
+/* CSR bit definitions */
+#define PCI_CSR_HOST    	0x00000001
+#define PCI_CSR_ARBEN   	0x00000002
+#define PCI_CSR_ADS     	0x00000004
+#define PCI_CSR_PDS     	0x00000008
+#define PCI_CSR_ABE     	0x00000010
+#define PCI_CSR_DBT     	0x00000020
+#define PCI_CSR_ASE     	0x00000100
+#define PCI_CSR_IC      	0x00008000
+
+/* ISR (Interrupt status) Register bit definitions */
+#define PCI_ISR_PSE     	0x00000001
+#define PCI_ISR_PFE     	0x00000002
+#define PCI_ISR_PPE     	0x00000004
+#define PCI_ISR_AHBE    	0x00000008
+#define PCI_ISR_APDC    	0x00000010
+#define PCI_ISR_PADC    	0x00000020
+#define PCI_ISR_ADB     	0x00000040
+#define PCI_ISR_PDB     	0x00000080
+
+/* INTEN (Interrupt Enable) Register bit definitions */
+#define PCI_INTEN_PSE   	0x00000001
+#define PCI_INTEN_PFE   	0x00000002
+#define PCI_INTEN_PPE   	0x00000004
+#define PCI_INTEN_AHBE  	0x00000008
+#define PCI_INTEN_APDC  	0x00000010
+#define PCI_INTEN_PADC  	0x00000020
+#define PCI_INTEN_ADB   	0x00000040
+#define PCI_INTEN_PDB   	0x00000080
+
+/*
+ * Shift value for byte enable on NP cmd/byte enable register
+ */
+#define IXP4XX_PCI_NP_CBE_BESL		4
+
+/*
+ * PCI commands supported by NP access unit
+ */
+#define NP_CMD_IOREAD			0x2
+#define NP_CMD_IOWRITE			0x3
+#define NP_CMD_CONFIGREAD		0xa
+#define NP_CMD_CONFIGWRITE		0xb
+#define NP_CMD_MEMREAD			0x6
+#define	NP_CMD_MEMWRITE			0x7
+
+/*
+ * Constants for CRP access into local config space
+ */
+#define CRP_AD_CBE_BESL         20
+#define CRP_AD_CBE_WRITE	0x00010000
+
+
+/*
+ * USB Device Controller
+ *
+ * These are used by the USB gadget driver, so they don't follow the
+ * IXP4XX_ naming convetions.
+ *
+ */
+# define IXP4XX_USB_REG(x)       (*((volatile u32 *)(x)))
+
+/* UDC Undocumented - Reserved1 */
+#define UDC_RES1	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0004)  
+/* UDC Undocumented - Reserved2 */
+#define UDC_RES2	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0008)  
+/* UDC Undocumented - Reserved3 */
+#define UDC_RES3	IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x000C)  
+/* UDC Control Register */
+#define UDCCR		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0000)  
+/* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0010)  
+/* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0014)  
+/* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0018)  
+/* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x001C)  
+/* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0020)  
+/* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0024)  
+/* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0028)  
+/* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x002C)  
+/* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0030)  
+/* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0034)  
+/* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0038)  
+/* UDC Endpoint 11 (IN) Control/Status Register */
+#define UDCCS11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x003C)  
+/* UDC Endpoint 12 (OUT) Control/Status Register */
+#define UDCCS12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0040)  
+/* UDC Endpoint 13 (IN) Control/Status Register */
+#define UDCCS13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0044)  
+/* UDC Endpoint 14 (OUT) Control/Status Register */
+#define UDCCS14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0048)  
+/* UDC Endpoint 15 (Interrupt) Control/Status Register */
+#define UDCCS15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x004C)  
+/* UDC Frame Number Register High */
+#define UFNRH		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0060)  
+/* UDC Frame Number Register Low */
+#define UFNRL		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0064)  
+/* UDC Byte Count Reg 2 */
+#define UBCR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0068)  
+/* UDC Byte Count Reg 4 */
+#define UBCR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x006c)  
+/* UDC Byte Count Reg 7 */
+#define UBCR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0070)  
+/* UDC Byte Count Reg 9 */
+#define UBCR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0074)  
+/* UDC Byte Count Reg 12 */
+#define UBCR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0078)  
+/* UDC Byte Count Reg 14 */
+#define UBCR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x007c)  
+/* UDC Endpoint 0 Data Register */
+#define UDDR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0080)  
+/* UDC Endpoint 1 Data Register */
+#define UDDR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0100)  
+/* UDC Endpoint 2 Data Register */
+#define UDDR2		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0180)  
+/* UDC Endpoint 3 Data Register */
+#define UDDR3		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0200)  
+/* UDC Endpoint 4 Data Register */
+#define UDDR4		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0400)  
+/* UDC Endpoint 5 Data Register */
+#define UDDR5		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00A0)  
+/* UDC Endpoint 6 Data Register */
+#define UDDR6		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0600)  
+/* UDC Endpoint 7 Data Register */
+#define UDDR7		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0680)  
+/* UDC Endpoint 8 Data Register */
+#define UDDR8		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0700)  
+/* UDC Endpoint 9 Data Register */
+#define UDDR9		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0900)  
+/* UDC Endpoint 10 Data Register */
+#define UDDR10		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00C0)  
+/* UDC Endpoint 11 Data Register */
+#define UDDR11		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B00)  
+/* UDC Endpoint 12 Data Register */
+#define UDDR12		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0B80)  
+/* UDC Endpoint 13 Data Register */
+#define UDDR13		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0C00)  
+/* UDC Endpoint 14 Data Register */
+#define UDDR14		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0E00)  
+/* UDC Endpoint 15 Data Register */
+#define UDDR15		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x00E0)  
+/* UDC Interrupt Control Register 0 */
+#define UICR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0050)  
+/* UDC Interrupt Control Register 1 */
+#define UICR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0054)  
+/* UDC Status Interrupt Register 0 */
+#define USIR0		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x0058)  
+/* UDC Status Interrupt Register 1 */
+#define USIR1		IXP4XX_USB_REG(IXP4XX_USB_BASE_VIRT+0x005C)  
+
+#define UDCCR_UDE	(1 << 0)	/* UDC enable */
+#define UDCCR_UDA	(1 << 1)	/* UDC active */
+#define UDCCR_RSM	(1 << 2)	/* Device resume */
+#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
+#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
+#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
+#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
+
+#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
+#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
+#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
+#define UDCCS0_SST	(1 << 4)	/* Sent stall */
+#define UDCCS0_FST	(1 << 5)	/* Force stall */
+#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
+#define UDCCS0_SA	(1 << 7)	/* Setup active */
+
+#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
+
+#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
+#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
+
+#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
+#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
+#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
+#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
+#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
+#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
+#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
+#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
+#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
+
+#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
+#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
+#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
+#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
+#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
+#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
+#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
+#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
+
+#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
+#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
+#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
+#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
+#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
+#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
+#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
+#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
+
+#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
+#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
+#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
+#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
+#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
+#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
+#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
+#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
+
+#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
+
+/* "fuse" bits of IXP_EXP_CFG2 */
+#define IXP4XX_FEATURE_RCOMP		(1 << 0)
+#define IXP4XX_FEATURE_USB_DEVICE	(1 << 1)
+#define IXP4XX_FEATURE_HASH		(1 << 2)
+#define IXP4XX_FEATURE_AES		(1 << 3)
+#define IXP4XX_FEATURE_DES		(1 << 4)
+#define IXP4XX_FEATURE_HDLC		(1 << 5)
+#define IXP4XX_FEATURE_AAL		(1 << 6)
+#define IXP4XX_FEATURE_HSS		(1 << 7)
+#define IXP4XX_FEATURE_UTOPIA		(1 << 8)
+#define IXP4XX_FEATURE_NPEB_ETH0	(1 << 9)
+#define IXP4XX_FEATURE_NPEC_ETH		(1 << 10)
+#define IXP4XX_FEATURE_RESET_NPEA	(1 << 11)
+#define IXP4XX_FEATURE_RESET_NPEB	(1 << 12)
+#define IXP4XX_FEATURE_RESET_NPEC	(1 << 13)
+#define IXP4XX_FEATURE_PCI		(1 << 14)
+#define IXP4XX_FEATURE_ECC_TIMESYNC	(1 << 15)
+#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT	(3 << 16)
+#define IXP4XX_FEATURE_USB_HOST		(1 << 18)
+#define IXP4XX_FEATURE_NPEA_ETH		(1 << 19)
+#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3	(1 << 20)
+#define IXP4XX_FEATURE_RSA		(1 << 21)
+#define IXP4XX_FEATURE_XSCALE_MAX_FREQ	(3 << 22)
+#define IXP4XX_FEATURE_RESERVED		(0xFF << 24)
+
+#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC |	\
+				    IXP4XX_FEATURE_USB_HOST |		\
+				    IXP4XX_FEATURE_NPEA_ETH |		\
+				    IXP4XX_FEATURE_NPEB_ETH_1_TO_3 |	\
+				    IXP4XX_FEATURE_RSA |		\
+				    IXP4XX_FEATURE_XSCALE_MAX_FREQ)
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
new file mode 100644
index 000000000000..c4d2830ac987
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/memory.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/memory.h
+ *
+ * Copyright (c) 2001-2004 MontaVista Software, Inc.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+#if !defined(__ASSEMBLY__) && defined(CONFIG_PCI)
+
+void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+	ixp4xx_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD (SZ_64M - 1)
+
+#endif
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ *
+ * These are dummies for now.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/nas100d.h b/arch/arm/mach-ixp4xx/include/mach/nas100d.h
new file mode 100644
index 000000000000..3771d62a9748
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/nas100d.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/nas100d.h
+ *
+ * NAS100D platform specific definitions
+ *
+ * Copyright (c) 2005 Tower Technologies
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * based on ixdp425.h:
+ *	Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define NAS100D_SDA_PIN		5
+#define NAS100D_SCL_PIN		6
+
+/*
+ * NAS100D PCI IRQs
+ */
+#define NAS100D_PCI_MAX_DEV	3
+#define NAS100D_PCI_IRQ_LINES	3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define NAS100D_PCI_INTA_PIN	11
+#define NAS100D_PCI_INTB_PIN	10
+#define NAS100D_PCI_INTC_PIN	9
+#define NAS100D_PCI_INTD_PIN	8
+#define NAS100D_PCI_INTE_PIN	7
+
+/* Buttons */
+
+#define NAS100D_PB_GPIO         14   /* power button */
+#define NAS100D_RB_GPIO         4    /* reset button */
+
+/* Power control */
+
+#define NAS100D_PO_GPIO         12   /* power off */
+
+/* LEDs */
+
+#define NAS100D_LED_WLAN_GPIO	0
+#define NAS100D_LED_DISK_GPIO	3
+#define NAS100D_LED_PWR_GPIO	15
diff --git a/arch/arm/mach-ixp4xx/include/mach/npe.h b/arch/arm/mach-ixp4xx/include/mach/npe.h
new file mode 100644
index 000000000000..37d0511689dc
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/npe.h
@@ -0,0 +1,39 @@
+#ifndef __IXP4XX_NPE_H
+#define __IXP4XX_NPE_H
+
+#include <linux/kernel.h>
+
+extern const char *npe_names[];
+
+struct npe_regs {
+	u32 exec_addr, exec_data, exec_status_cmd, exec_count;
+	u32 action_points[4];
+	u32 watchpoint_fifo, watch_count;
+	u32 profile_count;
+	u32 messaging_status, messaging_control;
+	u32 mailbox_status, /*messaging_*/ in_out_fifo;
+};
+
+struct npe {
+	struct resource *mem_res;
+	struct npe_regs __iomem *regs;
+	u32 regs_phys;
+	int id;
+	int valid;
+};
+
+
+static inline const char *npe_name(struct npe *npe)
+{
+	return npe_names[npe->id];
+}
+
+int npe_running(struct npe *npe);
+int npe_send_message(struct npe *npe, const void *msg, const char *what);
+int npe_recv_message(struct npe *npe, void *msg, const char *what);
+int npe_send_recv_message(struct npe *npe, void *msg, const char *what);
+int npe_load_firmware(struct npe *npe, const char *name, struct device *dev);
+struct npe *npe_request(int id);
+void npe_release(struct npe *npe);
+
+#endif /* __IXP4XX_NPE_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/nslu2.h b/arch/arm/mach-ixp4xx/include/mach/nslu2.h
new file mode 100644
index 000000000000..85d00adbfb92
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/nslu2.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/nslu2.h
+ *
+ * NSLU2 platform specific definitions
+ *
+ * Author: Mark Rakes <mrakes AT mac.com>
+ * Maintainers: http://www.nslu2-linux.org
+ *
+ * based on ixdp425.h:
+ *	Copyright 2004 (c) MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define NSLU2_SDA_PIN		7
+#define NSLU2_SCL_PIN		6
+
+/*
+ * NSLU2 PCI IRQs
+ */
+#define NSLU2_PCI_MAX_DEV	3
+#define NSLU2_PCI_IRQ_LINES	3
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define NSLU2_PCI_INTA_PIN	11
+#define NSLU2_PCI_INTB_PIN	10
+#define NSLU2_PCI_INTC_PIN	9
+#define NSLU2_PCI_INTD_PIN	8
+
+/* NSLU2 Timer */
+#define NSLU2_FREQ 66000000
+
+/* Buttons */
+
+#define NSLU2_PB_GPIO		5	/* power button */
+#define NSLU2_PO_GPIO		8	/* power off */
+#define NSLU2_RB_GPIO		12	/* reset button */
+
+/* Buzzer */
+
+#define NSLU2_GPIO_BUZZ		4
+
+/* LEDs */
+
+#define NSLU2_LED_RED_GPIO	0
+#define NSLU2_LED_GRN_GPIO	1
+#define NSLU2_LED_DISK1_GPIO	3
+#define NSLU2_LED_DISK2_GPIO	2
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
new file mode 100644
index 000000000000..e824c02c825a
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -0,0 +1,173 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/platform.h
+ *
+ * Constants and functions that are useful to IXP4xx platform-specific code
+ * and device drivers.
+ *
+ * Copyright (C) 2004 MontaVista Software, Inc.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+#ifndef	__ARMEB__
+#define	REG_OFFSET	0
+#else
+#define	REG_OFFSET	3
+#endif
+
+/*
+ * Expansion bus memory regions
+ */
+#define IXP4XX_EXP_BUS_BASE_PHYS	(0x50000000)
+
+/*
+ * The expansion bus on the IXP4xx can be configured for either 16 or
+ * 32MB windows and the CS offset for each region changes based on the
+ * current configuration. This means that we cannot simply hardcode
+ * each offset. ixp4xx_sys_init() looks at the expansion bus configuration
+ * as setup by the bootloader to determine our window size.
+ */
+extern unsigned long ixp4xx_exp_bus_size;
+
+#define	IXP4XX_EXP_BUS_BASE(region)\
+		(IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size))
+
+#define IXP4XX_EXP_BUS_END(region)\
+		(IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1)
+
+/* Those macros can be used to adjust timing and configure
+ * other features for each region.
+ */
+
+#define IXP4XX_EXP_BUS_RECOVERY_T(x)	(((x) & 0x0f) << 16)
+#define IXP4XX_EXP_BUS_HOLD_T(x)	(((x) & 0x03) << 20)
+#define IXP4XX_EXP_BUS_STROBE_T(x)	(((x) & 0x0f) << 22)
+#define IXP4XX_EXP_BUS_SETUP_T(x)	(((x) & 0x03) << 26)
+#define IXP4XX_EXP_BUS_ADDR_T(x)	(((x) & 0x03) << 28)
+#define IXP4XX_EXP_BUS_SIZE(x)		(((x) & 0x0f) << 10)
+#define IXP4XX_EXP_BUS_CYCLES(x)	(((x) & 0x03) << 14)
+
+#define IXP4XX_EXP_BUS_CS_EN		(1L << 31)
+#define IXP4XX_EXP_BUS_BYTE_RD16	(1L << 6)
+#define IXP4XX_EXP_BUS_HRDY_POL		(1L << 5)
+#define IXP4XX_EXP_BUS_MUX_EN		(1L << 4)
+#define IXP4XX_EXP_BUS_SPLT_EN		(1L << 3)
+#define IXP4XX_EXP_BUS_WR_EN		(1L << 1)
+#define IXP4XX_EXP_BUS_BYTE_EN		(1L << 0)
+
+#define IXP4XX_EXP_BUS_CYCLES_INTEL	0x00
+#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA	0x01
+#define IXP4XX_EXP_BUS_CYCLES_HPI	0x02
+
+#define IXP4XX_FLASH_WRITABLE	(0x2)
+#define IXP4XX_FLASH_DEFAULT	(0xbcd23c40)
+#define IXP4XX_FLASH_WRITE	(0xbcd23c42)
+
+/*
+ * Clock Speed Definitions.
+ */
+#define IXP4XX_PERIPHERAL_BUS_CLOCK 	(66) /* 66Mhzi APB BUS   */ 
+#define IXP4XX_UART_XTAL        	14745600
+
+/*
+ * This structure provide a means for the board setup code
+ * to give information to th pata_ixp4xx driver. It is
+ * passed as platform_data.
+ */
+struct ixp4xx_pata_data {
+	volatile u32	*cs0_cfg;
+	volatile u32	*cs1_cfg;
+	unsigned long	cs0_bits;
+	unsigned long	cs1_bits;
+	void __iomem	*cs0;
+	void __iomem	*cs1;
+};
+
+struct sys_timer;
+
+#define IXP4XX_ETH_NPEA		0x00
+#define IXP4XX_ETH_NPEB		0x10
+#define IXP4XX_ETH_NPEC		0x20
+
+/* Information about built-in Ethernet MAC interfaces */
+struct eth_plat_info {
+	u8 phy;		/* MII PHY ID, 0 - 31 */
+	u8 rxq;		/* configurable, currently 0 - 31 only */
+	u8 txreadyq;
+	u8 hwaddr[6];
+};
+
+/* Information about built-in HSS (synchronous serial) interfaces */
+struct hss_plat_info {
+	int (*set_clock)(int port, unsigned int clock_type);
+	int (*open)(int port, void *pdev,
+		    void (*set_carrier_cb)(void *pdev, int carrier));
+	void (*close)(int port, void *pdev);
+	u8 txreadyq;
+};
+
+/*
+ * Frequency of clock used for primary clocksource
+ */
+extern unsigned long ixp4xx_timer_freq;
+
+/*
+ * Functions used by platform-level setup code
+ */
+extern void ixp4xx_map_io(void);
+extern void ixp4xx_init_irq(void);
+extern void ixp4xx_sys_init(void);
+extern void ixp4xx_timer_init(void);
+extern struct sys_timer ixp4xx_timer;
+extern void ixp4xx_pci_preinit(void);
+struct pci_sys_data;
+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
+
+/*
+ * GPIO-functions
+ */
+/*
+ * The following converted to the real HW bits the gpio_line_config
+ */
+/* GPIO pin types */
+#define IXP4XX_GPIO_OUT 		0x1
+#define IXP4XX_GPIO_IN  		0x2
+
+/* GPIO signal types */
+#define IXP4XX_GPIO_LOW			0
+#define IXP4XX_GPIO_HIGH		1
+
+/* GPIO Clocks */
+#define IXP4XX_GPIO_CLK_0		14
+#define IXP4XX_GPIO_CLK_1		15
+
+static inline void gpio_line_config(u8 line, u32 direction)
+{
+	if (direction == IXP4XX_GPIO_IN)
+		*IXP4XX_GPIO_GPOER |= (1 << line);
+	else
+		*IXP4XX_GPIO_GPOER &= ~(1 << line);
+}
+
+static inline void gpio_line_get(u8 line, int *value)
+{
+	*value = (*IXP4XX_GPIO_GPINR >> line) & 0x1;
+}
+
+static inline void gpio_line_set(u8 line, int value)
+{
+	if (value == IXP4XX_GPIO_HIGH)
+	    *IXP4XX_GPIO_GPOUTR |= (1 << line);
+	else if (value == IXP4XX_GPIO_LOW)
+	    *IXP4XX_GPIO_GPOUTR &= ~(1 << line);
+}
+
+#endif // __ASSEMBLY__
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h b/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
new file mode 100644
index 000000000000..17274a2e3dec
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
+ *
+ * Motorolla PrPMC1100 platform specific definitions
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ *
+ * Copyright 2004 (c) MontaVista, Software, Inc. 
+ * 
+ * This file is licensed under  the terms of the GNU General Public 
+ * License version 2. This program is licensed "as is" without any 
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H__
+#error "Do not include this directly, instead #include <mach/hardware.h>"
+#endif
+
+#define	PRPMC1100_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
+#define	PRPMC1100_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
+
+#define	PRPMC1100_PCI_MIN_DEVID	10
+#define	PRPMC1100_PCI_MAX_DEVID	16
+#define	PRPMC1100_PCI_IRQ_LINES	4
+
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define PRPMC1100_PCI_INTA_PIN	11
+#define PRPMC1100_PCI_INTB_PIN	10
+#define	PRPMC1100_PCI_INTC_PIN	9
+#define	PRPMC1100_PCI_INTD_PIN	8
+
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
new file mode 100644
index 000000000000..1e52b95cede5
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#ifndef IXP4XX_QMGR_H
+#define IXP4XX_QMGR_H
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+
+#define HALF_QUEUES	32
+#define QUEUES		64	/* only 32 lower queues currently supported */
+#define MAX_QUEUE_LENGTH 4	/* in dwords */
+
+#define QUEUE_STAT1_EMPTY		1 /* queue status bits */
+#define QUEUE_STAT1_NEARLY_EMPTY	2
+#define QUEUE_STAT1_NEARLY_FULL		4
+#define QUEUE_STAT1_FULL		8
+#define QUEUE_STAT2_UNDERFLOW		1
+#define QUEUE_STAT2_OVERFLOW		2
+
+#define QUEUE_WATERMARK_0_ENTRIES	0
+#define QUEUE_WATERMARK_1_ENTRY		1
+#define QUEUE_WATERMARK_2_ENTRIES	2
+#define QUEUE_WATERMARK_4_ENTRIES	3
+#define QUEUE_WATERMARK_8_ENTRIES	4
+#define QUEUE_WATERMARK_16_ENTRIES	5
+#define QUEUE_WATERMARK_32_ENTRIES	6
+#define QUEUE_WATERMARK_64_ENTRIES	7
+
+/* queue interrupt request conditions */
+#define QUEUE_IRQ_SRC_EMPTY		0
+#define QUEUE_IRQ_SRC_NEARLY_EMPTY	1
+#define QUEUE_IRQ_SRC_NEARLY_FULL	2
+#define QUEUE_IRQ_SRC_FULL		3
+#define QUEUE_IRQ_SRC_NOT_EMPTY		4
+#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY	5
+#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL	6
+#define QUEUE_IRQ_SRC_NOT_FULL		7
+
+struct qmgr_regs {
+	u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */
+	u32 stat1[4];		/* 0x400 - 0x40F */
+	u32 stat2[2];		/* 0x410 - 0x417 */
+	u32 statne_h;		/* 0x418 - queue nearly empty */
+	u32 statf_h;		/* 0x41C - queue full */
+	u32 irqsrc[4];		/* 0x420 - 0x42F IRC source */
+	u32 irqen[2];		/* 0x430 - 0x437 IRQ enabled */
+	u32 irqstat[2];		/* 0x438 - 0x43F - IRQ access only */
+	u32 reserved[1776];
+	u32 sram[2048];		/* 0x2000 - 0x3FFF - config and buffer */
+};
+
+void qmgr_set_irq(unsigned int queue, int src,
+		  void (*handler)(void *pdev), void *pdev);
+void qmgr_enable_irq(unsigned int queue);
+void qmgr_disable_irq(unsigned int queue);
+
+/* request_ and release_queue() must be called from non-IRQ context */
+int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
+		       unsigned int nearly_empty_watermark,
+		       unsigned int nearly_full_watermark);
+void qmgr_release_queue(unsigned int queue);
+
+
+static inline void qmgr_put_entry(unsigned int queue, u32 val)
+{
+	extern struct qmgr_regs __iomem *qmgr_regs;
+	__raw_writel(val, &qmgr_regs->acc[queue][0]);
+}
+
+static inline u32 qmgr_get_entry(unsigned int queue)
+{
+	extern struct qmgr_regs __iomem *qmgr_regs;
+	return __raw_readl(&qmgr_regs->acc[queue][0]);
+}
+
+static inline int qmgr_get_stat1(unsigned int queue)
+{
+	extern struct qmgr_regs __iomem *qmgr_regs;
+	return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
+		>> ((queue & 7) << 2)) & 0xF;
+}
+
+static inline int qmgr_get_stat2(unsigned int queue)
+{
+	extern struct qmgr_regs __iomem *qmgr_regs;
+	return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
+		>> ((queue & 0xF) << 1)) & 0x3;
+}
+
+static inline int qmgr_stat_empty(unsigned int queue)
+{
+	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
+}
+
+static inline int qmgr_stat_nearly_empty(unsigned int queue)
+{
+	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
+}
+
+static inline int qmgr_stat_nearly_full(unsigned int queue)
+{
+	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
+}
+
+static inline int qmgr_stat_full(unsigned int queue)
+{
+	return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
+}
+
+static inline int qmgr_stat_underflow(unsigned int queue)
+{
+	return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
+}
+
+static inline int qmgr_stat_overflow(unsigned int queue)
+{
+	return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
+}
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
new file mode 100644
index 000000000000..92a7e8ddf69a
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/system.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/system.h
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+#if 0
+	if (!hlt_counter)
+		cpu_do_idle(0);
+#endif
+}
+
+
+static inline void arch_reset(char mode)
+{
+	if ( 1 && mode == 's') {
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+	} else {
+		/* Use on-chip reset capability */
+
+		/* set the "key" register to enable access to
+		 * "timer" and "enable" registers
+		 */
+		*IXP4XX_OSWK = IXP4XX_WDT_KEY;
+
+		/* write 0 to the timer register for an immediate reset */
+		*IXP4XX_OSWT = 0;
+
+		*IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
+	}
+}
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h
new file mode 100644
index 000000000000..89ce3ee84698
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/timex.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/timex.h
+ * 
+ */
+
+#include <mach/hardware.h>
+
+/*
+ * We use IXP425 General purpose timer for our timer needs, it runs at 
+ * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
+ * timer register ignores the bottom 2 bits of the LATCH value.
+ */
+#define FREQ 66666666
+#define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/udc.h b/arch/arm/mach-ixp4xx/include/mach/udc.h
new file mode 100644
index 000000000000..80d6da2eafac
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/udc.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/udc.h
+ *
+ */
+#include <asm/mach/udc_pxa2xx.h>
+
+extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
+
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
new file mode 100644
index 000000000000..2db0078a8cf2
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/uncompress.h 
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _ARCH_UNCOMPRESS_H_
+#define _ARCH_UNCOMPRESS_H_
+
+#include "ixp4xx-regs.h"
+#include <asm/mach-types.h>
+#include <linux/serial_reg.h>
+
+#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE)
+
+static volatile u32* uart_base;
+
+static inline void putc(int c)
+{
+	/* Check THRE and TEMT bits before we transmit the character.
+	 */
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+
+	*uart_base = c;
+}
+
+static void flush(void)
+{
+}
+
+static __inline__ void __arch_decomp_setup(unsigned long arch_id)
+{
+	/*
+	 * Some boards are using UART2 as console
+	 */
+	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
+			 machine_is_gateway7001() || machine_is_wg302v2())
+		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
+	else
+		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+}
+
+/*
+ * arch_id is a variable in decompress_kernel()
+ */
+#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
+
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/vmalloc.h b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
new file mode 100644
index 000000000000..7b3580b53adf
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-ixp4xx/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (0xFF000000)
+
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index 408796004812..64c29aacaac9 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -22,15 +22,15 @@
 
 #include <asm/mach/pci.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
 void __init ixdp425_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXDP425_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXDP425_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 44584afb34a3..9b2d2ec14c80 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -24,7 +24,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
index d1e75b7dc3b1..4ed7ac614920 100644
--- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c
@@ -19,14 +19,14 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
 void __init ixdpg425_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
-	set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index 63a23fa4aab4..c73a94d0ca2b 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -21,7 +21,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
-#include <asm/arch/npe.h>
+#include <mach/npe.h>
 
 #define DEBUG_MSG			0
 #define DEBUG_FW			0
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index fab94eaecee7..c6cb069a5a83 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -12,7 +12,7 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/arch/qmgr.h>
+#include <mach/qmgr.h>
 
 #define DEBUG		0
 
diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c
index b8ebaf4a9c8e..1088426fdcee 100644
--- a/arch/arm/mach-ixp4xx/nas100d-pci.c
+++ b/arch/arm/mach-ixp4xx/nas100d-pci.c
@@ -24,11 +24,11 @@
 
 void __init nas100d_pci_preinit(void)
 {
-	set_irq_type(IRQ_NAS100D_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTC, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NAS100D_PCI_INTE, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c
index 04661fef97f5..4429b8448b61 100644
--- a/arch/arm/mach-ixp4xx/nslu2-pci.c
+++ b/arch/arm/mach-ixp4xx/nslu2-pci.c
@@ -24,9 +24,9 @@
 
 void __init nslu2_pci_preinit(void)
 {
-	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW);
-	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW);
-	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c
index 6588f2c758e2..9b59ed03b151 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-pci.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c
@@ -23,14 +23,14 @@
 #include <linux/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/mach/pci.h>
 
 void __init wg302v2_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW);
-	set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
 
 	ixp4xx_pci_preinit();
 }
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index f7e09ad804e8..7ea782021d1f 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -23,7 +23,7 @@
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index a39f0f3c4730..c79f492072f9 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/mbus.h>
 #include <linux/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include "common.h"
 
 /*
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 5938a3b33cdc..0e509b8ad56e 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -19,7 +19,7 @@
 #include <asm/timex.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
 #include <asm/plat-orion/cache-feroceon-l2.h>
 #include <asm/plat-orion/ehci-orion.h>
 #include <asm/plat-orion/orion_nand.h>
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index d5c482c628e3..610fb24d8ae2 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -21,7 +21,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
 #include "common.h"
 
 static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
new file mode 100644
index 000000000000..c0cc5b5c82ac
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/kirkwood.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =KIRKWOOD_REGS_PHYS_BASE
+	ldrne	\rx, =KIRKWOOD_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-kirkwood/include/mach/dma.h b/arch/arm/mach-kirkwood/include/mach/dma.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
new file mode 100644
index 000000000000..83e0cba77b36
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Kirkwood platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/kirkwood.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ check low interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
+	mov	\irqnr, #31
+	ands	\irqstat, \irqstat, \tmp
+	bne	1001f
+
+	@ if no low interrupts set, check high interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
+	mov	\irqnr, #63
+	ands	\irqstat, \irqstat, \tmp
+
+	@ find first active interrupt source
+1001:	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-kirkwood/include/mach/hardware.h b/arch/arm/mach-kirkwood/include/mach/hardware.h
new file mode 100644
index 000000000000..cde85283f7d3
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "kirkwood.h"
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO			0x00001000
+#define PCIBIOS_MIN_MEM			0x01000000
+#define PCIMEM_BASE			KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/io.h b/arch/arm/mach-kirkwood/include/mach/io.h
new file mode 100644
index 000000000000..be07be0ef522
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "kirkwood.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)((addr - KIRKWOOD_PCIE_IO_PHYS_BASE)
+					+ KIRKWOOD_PCIE_IO_VIRT_BASE);
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/irqs.h b/arch/arm/mach-kirkwood/include/mach/irqs.h
new file mode 100644
index 000000000000..6fd05838c72d
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/irqs.h
@@ -0,0 +1,63 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "kirkwood.h"	/* need GPIO_MAX */
+
+/*
+ * Low Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_HIGH_SUM	0
+#define IRQ_KIRKWOOD_BRIDGE	1
+#define IRQ_KIRKWOOD_HOST2CPU	2
+#define IRQ_KIRKWOOD_CPU2HOST	3
+#define IRQ_KIRKWOOD_XOR_00	5
+#define IRQ_KIRKWOOD_XOR_01	6
+#define IRQ_KIRKWOOD_XOR_10	7
+#define IRQ_KIRKWOOD_XOR_11	8
+#define IRQ_KIRKWOOD_PCIE	9
+#define IRQ_KIRKWOOD_GE00_SUM	11
+#define IRQ_KIRKWOOD_GE01_SUM	15
+#define IRQ_KIRKWOOD_USB	19
+#define IRQ_KIRKWOOD_SATA	21
+#define IRQ_KIRKWOOD_CRYPTO	22
+#define IRQ_KIRKWOOD_SPI	23
+#define IRQ_KIRKWOOD_I2S	24
+#define IRQ_KIRKWOOD_TS_0	26
+#define IRQ_KIRKWOOD_SDIO	28
+#define IRQ_KIRKWOOD_TWSI	29
+#define IRQ_KIRKWOOD_AVB	30
+#define IRQ_KIRKWOOD_TDMI	31
+
+/*
+ * High Interrupt Controller
+ */
+#define IRQ_KIRKWOOD_UART_0	33
+#define IRQ_KIRKWOOD_UART_1	34
+#define IRQ_KIRKWOOD_GPIO_LOW_0_7	35
+#define IRQ_KIRKWOOD_GPIO_LOW_8_15	36
+#define IRQ_KIRKWOOD_GPIO_LOW_16_23	37
+#define IRQ_KIRKWOOD_GPIO_LOW_24_31	38
+#define IRQ_KIRKWOOD_GPIO_HIGH_0_7	39
+#define IRQ_KIRKWOOD_GPIO_HIGH_8_15	40
+#define IRQ_KIRKWOOD_GPIO_HIGH_16_23	41
+
+/*
+ * KIRKWOOD General Purpose Pins
+ */
+#define IRQ_KIRKWOOD_GPIO_START	64
+#define NR_GPIO_IRQS		GPIO_MAX
+
+#define NR_IRQS			(IRQ_KIRKWOOD_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
new file mode 100644
index 000000000000..d1336b41f0fb
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/kirkwood.h
+ *
+ * Generic definitions for Marvell Kirkwood SoC flavors:
+ *  88F6180, 88F6192 and 88F6281.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_KIRKWOOD_H
+#define __ASM_ARCH_KIRKWOOD_H
+
+/*
+ * Marvell Kirkwood address maps.
+ *
+ * phys
+ * e0000000	PCIe Memory space
+ * f1000000	on-chip peripheral registers
+ * f2000000	PCIe I/O space
+ * f3000000	NAND controller address window
+ *
+ * virt		phys		size
+ * fee00000	f1000000	1M	on-chip peripheral registers
+ * fef00000	f2000000	1M	PCIe I/O space
+ */
+
+#define KIRKWOOD_NAND_MEM_PHYS_BASE	0xf3000000
+#define KIRKWOOD_NAND_MEM_SIZE		SZ_64K /* 1K is sufficient, but 64K
+						* is the minimal window size
+						*/
+
+#define KIRKWOOD_PCIE_IO_PHYS_BASE	0xf2000000
+#define KIRKWOOD_PCIE_IO_VIRT_BASE	0xfef00000
+#define KIRKWOOD_PCIE_IO_BUS_BASE	0x00000000
+#define KIRKWOOD_PCIE_IO_SIZE		SZ_1M
+
+#define KIRKWOOD_REGS_PHYS_BASE		0xf1000000
+#define KIRKWOOD_REGS_VIRT_BASE		0xfee00000
+#define KIRKWOOD_REGS_SIZE		SZ_1M
+
+#define KIRKWOOD_PCIE_MEM_PHYS_BASE	0xe0000000
+#define KIRKWOOD_PCIE_MEM_SIZE		SZ_128M
+
+/*
+ * MBUS bridge registers.
+ */
+#define BRIDGE_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define   CPU_RESET		0x00000002
+#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define   SOFT_RESET_OUT_EN	0x00000004
+#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define   SOFT_RESET		0x00000001
+#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define   BRIDGE_INT_TIMER0	0x0002
+#define   BRIDGE_INT_TIMER1	0x0004
+#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
+#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define   IRQ_CAUSE_LOW_OFF	0x0000
+#define   IRQ_MASK_LOW_OFF	0x0004
+#define   IRQ_CAUSE_HIGH_OFF	0x0010
+#define   IRQ_MASK_HIGH_OFF	0x0014
+#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
+#define  L2_CONFIG_REG		(BRIDGE_VIRT_BASE | 0x0128)
+#define   L2_WRITETHROUGH	0x00000010
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x00000)
+#define  DDR_WINDOW_CPU_BASE	(DDR_VIRT_BASE | 0x1500)
+
+#define DEV_BUS_PHYS_BASE	(KIRKWOOD_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE	(KIRKWOOD_REGS_VIRT_BASE | 0x10000)
+#define  SAMPLE_AT_RESET	(DEV_BUS_VIRT_BASE | 0x0030)
+#define  DEVICE_ID		(DEV_BUS_VIRT_BASE | 0x0034)
+#define  RTC_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0300)
+#define  SPI_PHYS_BASE		(DEV_BUS_PHYS_BASE | 0x0600)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
+
+#define PCIE_VIRT_BASE		(KIRKWOOD_REGS_VIRT_BASE | 0x40000)
+
+#define USB_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x50000)
+
+#define GE00_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x70000)
+#define GE01_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x74000)
+
+#define SATA_PHYS_BASE		(KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+
+
+#define GPIO_MAX		50
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h
new file mode 100644
index 000000000000..b5fb34bdccd5
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
new file mode 100644
index 000000000000..8510f6cfdabf
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/kirkwood.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif
diff --git a/arch/arm/mach-kirkwood/include/mach/timex.h b/arch/arm/mach-kirkwood/include/mach/timex.h
new file mode 100644
index 000000000000..f77ef4a32c5f
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/timex.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
+
+#define KIRKWOOD_TCLK		166666667
diff --git a/arch/arm/mach-kirkwood/include/mach/uncompress.h b/arch/arm/mach-kirkwood/include/mach/uncompress.h
new file mode 100644
index 000000000000..75d5497df3a8
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/kirkwood.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-kirkwood/include/mach/vmalloc.h b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
new file mode 100644
index 000000000000..8f48260dcdad
--- /dev/null
+++ b/arch/arm/mach-kirkwood/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-kirkwood/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 6cf642c504d3..182230a5d198 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -21,7 +21,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
 #include "common.h"
 
 #define RD88F6192_GPIO_USB_VBUS		10
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index e1f8de2c74a2..d8a43018c7d3 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -18,10 +18,11 @@
 #include <linux/timer.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/kirkwood.h>
+#include <mach/kirkwood.h>
 #include <asm/plat-orion/orion_nand.h>
 #include "common.h"
 
@@ -69,6 +70,8 @@ static struct platform_device rd88f6281_nand_flash = {
 
 static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static struct mv_sata_platform_data rd88f6281_sata_data = {
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 05ac2bd04020..0468e93b7d3b 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -18,7 +18,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/devices.h>
+#include <mach/devices.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-ks8695/cpu.c b/arch/arm/mach-ks8695/cpu.c
index 407d255e42bf..c6c08e800233 100644
--- a/arch/arm/mach-ks8695/cpu.c
+++ b/arch/arm/mach-ks8695/cpu.c
@@ -25,13 +25,13 @@
 #include <linux/module.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/regs-sys.h>
-#include <asm/arch/regs-misc.h>
+#include <mach/regs-sys.h>
+#include <mach/regs-misc.h>
 
 
 static struct __initdata map_desc ks8695_io_desc[] = {
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index 3db2ec61d06f..4bd251482c8f 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -22,9 +22,9 @@
 
 #include <linux/platform_device.h>
 
-#include <asm/arch/regs-wan.h>
-#include <asm/arch/regs-lan.h>
-#include <asm/arch/regs-hpna.h>
+#include <mach/regs-wan.h>
+#include <mach/regs-lan.h>
+#include <mach/regs-hpna.h>
 
 
 /* --------------------------------------------------------------------
diff --git a/arch/arm/mach-ks8695/gpio.c b/arch/arm/mach-ks8695/gpio.c
index 5e46191c0af9..3624e65cd89b 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/arch/arm/mach-ks8695/gpio.c
@@ -25,11 +25,11 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/gpio.h>
 
 /*
  * Configure a GPIO line for either GPIO function, or its internal
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
new file mode 100644
index 000000000000..3782c3559497
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Debug macros
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/hardware.h>
+#include <mach/regs-uart.h>
+
+	.macro	addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1				@ MMU enabled?
+		ldreq	\rx, =KS8695_UART_PA		@ physical base address
+		ldrne	\rx, =KS8695_UART_VA		@ virtual base address
+	.endm
+
+	.macro	senduart, rd, rx
+		str	\rd, [\rx, #KS8695_URTH]	@ Write to Transmit Holding Register
+	.endm
+
+	.macro	busyuart, rd, rx
+1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
+		tst	\rd, #URLS_URTE			@ Holding & Shift registers empty?
+		beq	1001b
+	.endm
+
+	.macro	waituart, rd, rx
+1001:		ldr	\rd, [\rx, #KS8695_URLS]	@ Read Line Status Register
+		tst	\rd, #URLS_URTHRE		@ Holding Register empty?
+		beq	1001b
+	.endm
diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h
new file mode 100644
index 000000000000..2744fecb429c
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/devices.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/devices.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_DEVICES_H
+#define __ASM_ARCH_DEVICES_H
+
+#include <linux/pci.h>
+
+ /* Ethernet */
+extern void __init ks8695_add_device_wan(void);
+extern void __init ks8695_add_device_lan(void);
+extern void __init ks8695_add_device_hpna(void);
+
+ /* LEDs */
+extern short ks8695_leds_cpu;
+extern short ks8695_leds_timer;
+extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led);
+
+ /* PCI */
+#define KS8695_MODE_PCI		0
+#define KS8695_MODE_MINIPCI	1
+#define KS8695_MODE_CARDBUS	2
+
+struct ks8695_pci_cfg {
+	short mode;
+	int (*map_irq)(struct pci_dev *, u8, u8);
+};
+extern __init void ks8695_init_pci(struct ks8695_pci_cfg *);
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/dma.h b/arch/arm/mach-ks8695/include/mach/dma.h
new file mode 100644
index 000000000000..561206280089
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/dma.h
@@ -0,0 +1,17 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/dma.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-ks8695/include/mach/entry-macro.S b/arch/arm/mach-ks8695/include/mach/entry-macro.S
new file mode 100644
index 000000000000..b4fe0c11c6ce
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/entry-macro.S
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * Low-level IRQ helper macros for KS8695
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+#include <mach/hardware.h>
+#include <mach/regs-irq.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =KS8695_IRQ_VA			@ Base address of interrupt controller
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base, #KS8695_INTMS]	@ Mask Status register
+
+		teq	\irqstat, #0
+		beq	1001f
+
+		mov	\irqnr, #0
+
+		tst	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tst	\irqstat, #0x0f
+		moveq	\irqstat, \irqstat, lsr #4
+		addeq	\irqnr, \irqnr, #4
+		tst	\irqstat, #0x03
+		moveq	\irqstat, \irqstat, lsr #2
+		addeq	\irqnr, \irqnr, #2
+		tst	\irqstat, #0x01
+		addeqs	\irqnr, \irqnr, #1
+1001:
+	.endm
diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h
new file mode 100644
index 000000000000..73c84168761c
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/gpio.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/gpio.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H_
+#define __ASM_ARCH_GPIO_H_
+
+#define KS8695_GPIO_0		0
+#define KS8695_GPIO_1		1
+#define KS8695_GPIO_2		2
+#define KS8695_GPIO_3		3
+#define KS8695_GPIO_4		4
+#define KS8695_GPIO_5		5
+#define KS8695_GPIO_6		6
+#define KS8695_GPIO_7		7
+#define KS8695_GPIO_8		8
+#define KS8695_GPIO_9		9
+#define KS8695_GPIO_10		10
+#define KS8695_GPIO_11		11
+#define KS8695_GPIO_12		12
+#define KS8695_GPIO_13		13
+#define KS8695_GPIO_14		14
+#define KS8695_GPIO_15		15
+
+
+/*
+ * Configure GPIO pin as external interrupt source.
+ */
+int __init_or_module ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
+
+/*
+ * Configure the GPIO line as an input.
+ */
+int __init_or_module gpio_direction_input(unsigned int pin);
+
+/*
+ * Configure the GPIO line as an output, with default state.
+ */
+int __init_or_module gpio_direction_output(unsigned int pin, unsigned int state);
+
+/*
+ * Set the state of an output GPIO line.
+ */
+void gpio_set_value(unsigned int pin, unsigned int state);
+
+/*
+ * Read the state of a GPIO line.
+ */
+int gpio_get_value(unsigned int pin);
+
+/*
+ * Map GPIO line to IRQ number.
+ */
+int gpio_to_irq(unsigned int pin);
+
+/*
+ * Map IRQ number to GPIO line.
+ */
+int irq_to_gpio(unsigned int irq);
+
+
+#include <asm-generic/gpio.h>
+
+static inline int gpio_request(unsigned int pin, const char *label)
+{
+	return 0;
+}
+
+static inline void gpio_free(unsigned int pin)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h
new file mode 100644
index 000000000000..1d640d075b7e
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/hardware.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/hardware.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Memory Map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical RAM address.
+ */
+#define KS8695_SDRAM_PA		0x00000000
+
+
+/*
+ * We map an entire MiB with the System Configuration Registers in even
+ * though only 64KiB is needed. This makes it easier for use with the
+ * head debug code as the initial MMU setup only deals in L1 sections.
+ */
+#define KS8695_IO_PA		0x03F00000
+#define KS8695_IO_VA		0xF0000000
+#define KS8695_IO_SIZE		SZ_1M
+
+#define KS8695_PCIMEM_PA	0x60000000
+#define KS8695_PCIMEM_SIZE	SZ_512M
+
+#define KS8695_PCIIO_PA		0x80000000
+#define KS8695_PCIIO_SIZE	SZ_64K
+
+
+/*
+ * PCI support
+ */
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0
+#define PCIBIOS_MIN_MEM		0
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/io.h b/arch/arm/mach-ks8695/include/mach/io.h
new file mode 100644
index 000000000000..f364f24ffe1e
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/io.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/io.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/irqs.h b/arch/arm/mach-ks8695/include/mach/irqs.h
new file mode 100644
index 000000000000..86fc9e6ce404
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/irqs.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/irqs.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define NR_IRQS				32
+
+/*
+ * IRQ definitions
+ */
+#define KS8695_IRQ_COMM_RX		0
+#define KS8695_IRQ_COMM_TX		1
+#define KS8695_IRQ_EXTERN0		2
+#define KS8695_IRQ_EXTERN1		3
+#define KS8695_IRQ_EXTERN2		4
+#define KS8695_IRQ_EXTERN3		5
+#define KS8695_IRQ_TIMER0		6
+#define KS8695_IRQ_TIMER1		7
+#define KS8695_IRQ_UART_TX		8
+#define KS8695_IRQ_UART_RX		9
+#define KS8695_IRQ_UART_LINE_STATUS	10
+#define KS8695_IRQ_UART_MODEM_STATUS	11
+#define KS8695_IRQ_LAN_RX_STOP		12
+#define KS8695_IRQ_LAN_TX_STOP		13
+#define KS8695_IRQ_LAN_RX_BUF		14
+#define KS8695_IRQ_LAN_TX_BUF		15
+#define KS8695_IRQ_LAN_RX_STATUS	16
+#define KS8695_IRQ_LAN_TX_STATUS	17
+#define KS8695_IRQ_HPNA_RX_STOP		18
+#define KS8695_IRQ_HPNA_TX_STOP		19
+#define KS8695_IRQ_HPNA_RX_BUF		20
+#define KS8695_IRQ_HPNA_TX_BUF		21
+#define KS8695_IRQ_HPNA_RX_STATUS	22
+#define KS8695_IRQ_HPNA_TX_STATUS	23
+#define KS8695_IRQ_BUS_ERROR		24
+#define KS8695_IRQ_WAN_RX_STOP		25
+#define KS8695_IRQ_WAN_TX_STOP		26
+#define KS8695_IRQ_WAN_RX_BUF		27
+#define KS8695_IRQ_WAN_TX_BUF		28
+#define KS8695_IRQ_WAN_RX_STATUS	29
+#define KS8695_IRQ_WAN_TX_STATUS	30
+#define KS8695_IRQ_WAN_LINK		31
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
new file mode 100644
index 000000000000..dadbe66cb75c
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/memory.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 Memory definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <mach/hardware.h>
+
+/*
+ * Physical SRAM offset.
+ */
+#define PHYS_OFFSET		KS8695_SDRAM_PA
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PCI
+
+/* PCI mappings */
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET + KS8695_PCIMEM_PA)
+#define __bus_to_virt(x)	((x) - KS8695_PCIMEM_PA + PAGE_OFFSET)
+
+/* Platform-bus mapping */
+extern struct bus_type platform_bus_type;
+#define is_lbus_device(dev)		(dev && dev->bus == &platform_bus_type)
+#define __arch_dma_to_virt(dev, x)	({ is_lbus_device(dev) ? \
+					__phys_to_virt(x) : __bus_to_virt(x); })
+#define __arch_virt_to_dma(dev, x)	({ is_lbus_device(dev) ? \
+					(dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); })
+#define __arch_page_to_dma(dev, x)	__arch_virt_to_dma(dev, page_address(x))
+
+#else
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+#endif
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-gpio.h b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
new file mode 100644
index 000000000000..0df6fe61d1ce
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-gpio.h
@@ -0,0 +1,55 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-gpio.h
+ *
+ * Copyright (C) 2007 Andrew Victor
+ *
+ * KS8695 - GPIO control registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_GPIO_H
+#define KS8695_GPIO_H
+
+#define KS8695_GPIO_OFFSET	(0xF0000 + 0xE600)
+#define KS8695_GPIO_VA		(KS8695_IO_VA + KS8695_GPIO_OFFSET)
+#define KS8695_GPIO_PA		(KS8695_IO_PA + KS8695_GPIO_OFFSET)
+
+
+#define KS8695_IOPM		(0x00)		/* I/O Port Mode Register */
+#define KS8695_IOPC		(0x04)		/* I/O Port Control Register */
+#define KS8695_IOPD		(0x08)		/* I/O Port Data Register */
+
+
+/* Port Mode Register */
+#define IOPM_(x)		(1 << (x))	/* Mode for GPIO Pin x */
+
+/* Port Control Register */
+#define IOPC_IOTIM1EN		(1 << 17)	/* GPIO Pin for Timer1 Enable */
+#define IOPC_IOTIM0EN		(1 << 16)	/* GPIO Pin for Timer0 Enable */
+#define IOPC_IOEINT3EN		(1 << 15)	/* GPIO Pin for External/Soft Interrupt 3 Enable */
+#define IOPC_IOEINT3TM		(7 << 12)	/* GPIO Pin for External/Soft Interrupt 3 Trigger Mode */
+#define IOPC_IOEINT3_MODE(x)	((x) << 12)
+#define IOPC_IOEINT2EN		(1 << 11)	/* GPIO Pin for External/Soft Interrupt 2 Enable */
+#define IOPC_IOEINT2TM		(7 << 8)	/* GPIO Pin for External/Soft Interrupt 2 Trigger Mode */
+#define IOPC_IOEINT2_MODE(x)	((x) << 8)
+#define IOPC_IOEINT1EN		(1 << 7)	/* GPIO Pin for External/Soft Interrupt 1 Enable */
+#define IOPC_IOEINT1TM		(7 << 4)	/* GPIO Pin for External/Soft Interrupt 1 Trigger Mode */
+#define IOPC_IOEINT1_MODE(x)	((x) << 4)
+#define IOPC_IOEINT0EN		(1 << 3)	/* GPIO Pin for External/Soft Interrupt 0 Enable */
+#define IOPC_IOEINT0TM		(7 << 0)	/* GPIO Pin for External/Soft Interrupt 0 Trigger Mode */
+#define IOPC_IOEINT0_MODE(x)	((x) << 0)
+
+ /* Trigger Modes */
+#define IOPC_TM_LOW		(0)		/* Level Detection (Active Low) */
+#define IOPC_TM_HIGH		(1)		/* Level Detection (Active High) */
+#define IOPC_TM_RISING		(2)		/* Rising Edge Detection */
+#define IOPC_TM_FALLING		(4)		/* Falling Edge Detection */
+#define IOPC_TM_EDGE		(6)		/* Both Edge Detection */
+
+/* Port Data Register */
+#define IOPD_(x)		(1 << (x))	/* Signal Level of GPIO Pin x */
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-hpna.h b/arch/arm/mach-ks8695/include/mach/regs-hpna.h
new file mode 100644
index 000000000000..815ce5c2e3b9
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-hpna.h
@@ -0,0 +1,25 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-wan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - HPNA Registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_HPNA_H
+#define KS8695_HPNA_H
+
+#define KS8695_HPNA_OFFSET	(0xF0000 + 0xA000)
+#define KS8695_HPNA_VA		(KS8695_IO_VA + KS8695_HPNA_OFFSET)
+#define KS8695_HPNA_PA		(KS8695_IO_PA + KS8695_HPNA_OFFSET)
+
+
+/*
+ * HPNA registers
+ */
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-irq.h b/arch/arm/mach-ks8695/include/mach/regs-irq.h
new file mode 100644
index 000000000000..352b7e8704d5
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-irq.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-irq.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - IRQ registers and bit definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_IRQ_H
+#define KS8695_IRQ_H
+
+#define KS8695_IRQ_OFFSET	(0xF0000 + 0xE200)
+#define KS8695_IRQ_VA		(KS8695_IO_VA + KS8695_IRQ_OFFSET)
+#define KS8695_IRQ_PA		(KS8695_IO_PA + KS8695_IRQ_OFFSET)
+
+
+/*
+ * Interrupt Controller registers
+ */
+#define KS8695_INTMC		(0x00)		/* Mode Control Register */
+#define KS8695_INTEN		(0x04)		/* Interrupt Enable Register */
+#define KS8695_INTST		(0x08)		/* Interrupt Status Register */
+#define KS8695_INTPW		(0x0c)		/* Interrupt Priority (WAN MAC) */
+#define KS8695_INTPH		(0x10)		/* Interrupt Priority (HPNA) [KS8695 only] */
+#define KS8695_INTPL		(0x14)		/* Interrupt Priority (LAN MAC) */
+#define KS8695_INTPT		(0x18)		/* Interrupt Priority (Timer) */
+#define KS8695_INTPU		(0x1c)		/* Interrupt Priority (UART) */
+#define KS8695_INTPE		(0x20)		/* Interrupt Priority (External Interrupt) */
+#define KS8695_INTPC		(0x24)		/* Interrupt Priority (Communications Channel) */
+#define KS8695_INTPBE		(0x28)		/* Interrupt Priority (Bus Error Response) */
+#define KS8695_INTMS		(0x2c)		/* Interrupt Mask Status Register */
+#define KS8695_INTHPF		(0x30)		/* Interrupt Pending Highest Priority (FIQ) */
+#define KS8695_INTHPI		(0x34)		/* Interrupt Pending Highest Priority (IRQ) */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-lan.h b/arch/arm/mach-ks8695/include/mach/regs-lan.h
new file mode 100644
index 000000000000..9ef409901e76
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-lan.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-lan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - LAN Registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_LAN_H
+#define KS8695_LAN_H
+
+#define KS8695_LAN_OFFSET	(0xF0000 + 0x8000)
+#define KS8695_LAN_VA		(KS8695_IO_VA + KS8695_LAN_OFFSET)
+#define KS8695_LAN_PA		(KS8695_IO_PA + KS8695_LAN_OFFSET)
+
+
+/*
+ * LAN registers
+ */
+#define KS8695_LMDTXC		(0x00)		/* DMA Transmit Control */
+#define KS8695_LMDRXC		(0x04)		/* DMA Receive Control */
+#define KS8695_LMDTSC		(0x08)		/* DMA Transmit Start Command */
+#define KS8695_LMDRSC		(0x0c)		/* DMA Receive Start Command */
+#define KS8695_LTDLB		(0x10)		/* Transmit Descriptor List Base Address */
+#define KS8695_LRDLB		(0x14)		/* Receive Descriptor List Base Address */
+#define KS8695_LMAL		(0x18)		/* MAC Station Address Low */
+#define KS8695_LMAH		(0x1c)		/* MAC Station Address High */
+#define KS8695_LMAAL_(n)	(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
+#define KS8695_LMAAH_(n)	(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
+
+
+/* DMA Transmit Control Register */
+#define LMDTXC_LMTRST		(1    << 31)	/* Soft Reset */
+#define LMDTXC_LMTBS		(0x3f << 24)	/* Transmit Burst Size */
+#define LMDTXC_LMTUCG		(1    << 18)	/* Transmit UDP Checksum Generate */
+#define LMDTXC_LMTTCG		(1    << 17)	/* Transmit TCP Checksum Generate */
+#define LMDTXC_LMTICG		(1    << 16)	/* Transmit IP Checksum Generate */
+#define LMDTXC_LMTFCE		(1    <<  9)	/* Transmit Flow Control Enable */
+#define LMDTXC_LMTLB		(1    <<  8)	/* Loopback mode */
+#define LMDTXC_LMTEP		(1    <<  2)	/* Transmit Enable Padding */
+#define LMDTXC_LMTAC		(1    <<  1)	/* Transmit Add CRC */
+#define LMDTXC_LMTE		(1    <<  0)	/* TX Enable */
+
+/* DMA Receive Control Register */
+#define LMDRXC_LMRBS		(0x3f << 24)	/* Receive Burst Size */
+#define LMDRXC_LMRUCC		(1    << 18)	/* Receive UDP Checksum check */
+#define LMDRXC_LMRTCG		(1    << 17)	/* Receive TCP Checksum check */
+#define LMDRXC_LMRICG		(1    << 16)	/* Receive IP Checksum check */
+#define LMDRXC_LMRFCE		(1    <<  9)	/* Receive Flow Control Enable */
+#define LMDRXC_LMRB		(1    <<  6)	/* Receive Broadcast */
+#define LMDRXC_LMRM		(1    <<  5)	/* Receive Multicast */
+#define LMDRXC_LMRU		(1    <<  4)	/* Receive Unicast */
+#define LMDRXC_LMRERR		(1    <<  3)	/* Receive Error Frame */
+#define LMDRXC_LMRA		(1    <<  2)	/* Receive All */
+#define LMDRXC_LMRE		(1    <<  1)	/* RX Enable */
+
+/* Additional Station Address High */
+#define LMAAH_E			(1    << 31)	/* Address Enabled */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-mem.h b/arch/arm/mach-ks8695/include/mach/regs-mem.h
new file mode 100644
index 000000000000..55806bc68ce3
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-mem.h
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-mem.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Memory Controller registers and bit definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_MEM_H
+#define KS8695_MEM_H
+
+#define KS8695_MEM_OFFSET	(0xF0000 + 0x4000)
+#define KS8695_MEM_VA		(KS8695_IO_VA + KS8695_MEM_OFFSET)
+#define KS8695_MEM_PA		(KS8695_IO_PA + KS8695_MEM_OFFSET)
+
+
+/*
+ * Memory Controller Registers
+ */
+#define KS8695_EXTACON0		(0x00)		/* External I/O 0 Access Control */
+#define KS8695_EXTACON1		(0x04)		/* External I/O 1 Access Control */
+#define KS8695_EXTACON2		(0x08)		/* External I/O 2 Access Control */
+#define KS8695_ROMCON0		(0x10)		/* ROM/SRAM/Flash 1 Control Register */
+#define KS8695_ROMCON1		(0x14)		/* ROM/SRAM/Flash 2 Control Register */
+#define KS8695_ERGCON		(0x20)		/* External I/O and ROM/SRAM/Flash General Register */
+#define KS8695_SDCON0		(0x30)		/* SDRAM Control Register 0 */
+#define KS8695_SDCON1		(0x34)		/* SDRAM Control Register 1 */
+#define KS8695_SDGCON		(0x38)		/* SDRAM General Control */
+#define KS8695_SDBCON		(0x3c)		/* SDRAM Buffer Control */
+#define KS8695_REFTIM		(0x40)		/* SDRAM Refresh Timer */
+
+
+/* External I/O Access Control Registers */
+#define EXTACON_EBNPTR		(0x3ff << 22)		/* Last Address Pointer */
+#define EXTACON_EBBPTR		(0x3ff << 12)		/* Base Pointer */
+#define EXTACON_EBTACT		(7     <<  9)		/* Write Enable/Output Enable Active Time */
+#define EXTACON_EBTCOH		(7     <<  6)		/* Chip Select Hold Time */
+#define EXTACON_EBTACS		(7     <<  3)		/* Address Setup Time before ECSN */
+#define EXTACON_EBTCOS		(7     <<  0)		/* Chip Select Time before OEN */
+
+/* ROM/SRAM/Flash Control Register */
+#define ROMCON_RBNPTR		(0x3ff << 22)		/* Next Pointer */
+#define ROMCON_RBBPTR		(0x3ff << 12)		/* Base Pointer */
+#define ROMCON_RBTACC		(7     <<  4)		/* Access Cycle Time */
+#define ROMCON_RBTPA		(3     <<  2)		/* Page Address Access Time */
+#define ROMCON_PMC		(3     <<  0)		/* Page Mode Configuration */
+#define		PMC_NORMAL		(0 << 0)
+#define		PMC_4WORD		(1 << 0)
+#define		PMC_8WORD		(2 << 0)
+#define		PMC_16WORD		(3 << 0)
+
+/* External I/O and ROM/SRAM/Flash General Register */
+#define ERGCON_TMULT		(3 << 28)		/* Time Multiplier */
+#define ERGCON_DSX2		(3 << 20)		/* Data Width (External I/O Bank 2) */
+#define ERGCON_DSX1		(3 << 18)		/* Data Width (External I/O Bank 1) */
+#define ERGCON_DSX0		(3 << 16)		/* Data Width (External I/O Bank 0) */
+#define ERGCON_DSR1		(3 <<  2)		/* Data Width (ROM/SRAM/Flash Bank 1) */
+#define ERGCON_DSR0		(3 <<  0)		/* Data Width (ROM/SRAM/Flash Bank 0) */
+
+/* SDRAM Control Register */
+#define SDCON_DBNPTR		(0x3ff << 22)		/* Last Address Pointer */
+#define SDCON_DBBPTR		(0x3ff << 12)		/* Base Pointer */
+#define SDCON_DBCAB		(3     <<  8)		/* Column Address Bits */
+#define SDCON_DBBNUM		(1     <<  3)		/* Number of Banks */
+#define SDCON_DBDBW		(3     <<  1)		/* Data Bus Width */
+
+/* SDRAM General Control Register */
+#define SDGCON_SDTRC		(3 << 2)		/* RAS to CAS latency */
+#define SDGCON_SDCAS		(3 << 0)		/* CAS latency */
+
+/* SDRAM Buffer Control Register */
+#define SDBCON_SDESTA		(1 << 31)		/* SDRAM Engine Status */
+#define SDBCON_RBUFBDIS		(1 << 24)		/* Read Buffer Burst Enable */
+#define SDBCON_WFIFOEN		(1 << 23)		/* Write FIFO Enable */
+#define SDBCON_RBUFEN		(1 << 22)		/* Read Buffer Enable */
+#define SDBCON_FLUSHWFIFO	(1 << 21)		/* Flush Write FIFO */
+#define SDBCON_RBUFINV		(1 << 20)		/* Read Buffer Invalidate */
+#define SDBCON_SDINI		(3 << 16)		/* SDRAM Initialization Control */
+#define SDBCON_SDMODE		(0x3fff << 0)		/* SDRAM Mode Register Value Program */
+
+/* SDRAM Refresh Timer Register */
+#define REFTIM_REFTIM		(0xffff << 0)		/* Refresh Timer Value */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-misc.h b/arch/arm/mach-ks8695/include/mach/regs-misc.h
new file mode 100644
index 000000000000..2740c52494a0
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-misc.h
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-misc.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Miscellaneous Registers
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_MISC_H
+#define KS8695_MISC_H
+
+#define KS8695_MISC_OFFSET	(0xF0000 + 0xEA00)
+#define KS8695_MISC_VA		(KS8695_IO_VA + KS8695_MISC_OFFSET)
+#define KS8695_MISC_PA		(KS8695_IO_PA + KS8695_MISC_OFFSET)
+
+
+/*
+ * Miscellaneous registers
+ */
+#define KS8695_DID		(0x00)		/* Device ID */
+#define KS8695_RID		(0x04)		/* Revision ID */
+#define KS8695_HMC		(0x08)		/* HPNA Miscellaneous Control [KS8695 only] */
+#define KS8695_WMC		(0x0c)		/* WAN Miscellaneous Control */
+#define KS8695_WPPM		(0x10)		/* WAN PHY Power Management */
+#define KS8695_PPS		(0x1c)		/* PHY PowerSave */
+
+/* Device ID Register */
+#define DID_ID			(0xffff << 0)	/* Device ID */
+
+/* Revision ID Register */
+#define RID_SUBID		(0xf << 4)	/* Sub-Device ID */
+#define RID_REVISION		(0xf << 0)	/* Revision ID */
+
+/* HPNA Miscellaneous Control Register */
+#define HMC_HSS			(1 << 1)	/* Speed */
+#define HMC_HDS			(1 << 0)	/* Duplex */
+
+/* WAN Miscellaneous Control Register */
+#define WMC_WANC		(1 << 30)	/* Auto-negotiation complete */
+#define WMC_WANR		(1 << 29)	/* Auto-negotiation restart */
+#define WMC_WANAP		(1 << 28)	/* Advertise Pause */
+#define WMC_WANA100F		(1 << 27)	/* Advertise 100 FDX */
+#define WMC_WANA100H		(1 << 26)	/* Advertise 100 HDX */
+#define WMC_WANA10F		(1 << 25)	/* Advertise 10 FDX */
+#define WMC_WANA10H		(1 << 24)	/* Advertise 10 HDX */
+#define WMC_WLS			(1 << 23)	/* Link status */
+#define WMC_WDS			(1 << 22)	/* Duplex status */
+#define WMC_WSS			(1 << 21)	/* Speed status */
+#define WMC_WLPP		(1 << 20)	/* Link Partner Pause */
+#define WMC_WLP100F		(1 << 19)	/* Link Partner 100 FDX */
+#define WMC_WLP100H		(1 << 18)	/* Link Partner 100 HDX */
+#define WMC_WLP10F		(1 << 17)	/* Link Partner 10 FDX */
+#define WMC_WLP10H		(1 << 16)	/* Link Partner 10 HDX */
+#define WMC_WAND		(1 << 15)	/* Auto-negotiation disable */
+#define WMC_WANF100		(1 << 14)	/* Force 100 */
+#define WMC_WANFF		(1 << 13)	/* Force FDX */
+#define WMC_WLED1S		(7 <<  4)	/* LED1 Select */
+#define		WLED1S_SPEED		(0 << 4)
+#define		WLED1S_LINK		(1 << 4)
+#define		WLED1S_DUPLEX		(2 << 4)
+#define		WLED1S_COLLISION	(3 << 4)
+#define		WLED1S_ACTIVITY		(4 << 4)
+#define		WLED1S_FDX_COLLISION	(5 << 4)
+#define		WLED1S_LINK_ACTIVITY	(6 << 4)
+#define WMC_WLED0S		(7 << 0)	/* LED0 Select */
+#define		WLED0S_SPEED		(0 << 0)
+#define		WLED0S_LINK		(1 << 0)
+#define		WLED0S_DUPLEX		(2 << 0)
+#define		WLED0S_COLLISION	(3 << 0)
+#define		WLED0S_ACTIVITY		(4 << 0)
+#define		WLED0S_FDX_COLLISION	(5 << 0)
+#define		WLED0S_LINK_ACTIVITY	(6 << 0)
+
+/* WAN PHY Power Management Register */
+#define WPPM_WLPBK		(1 << 14)	/* Local Loopback */
+#define WPPM_WRLPKB		(1 << 13)	/* Remove Loopback */
+#define WPPM_WPI		(1 << 12)	/* PHY isolate */
+#define WPPM_WFL		(1 << 10)	/* Force link */
+#define WPPM_MDIXS		(1 << 9)	/* MDIX Status */
+#define WPPM_FEF		(1 << 8)	/* Far End Fault */
+#define WPPM_AMDIXP		(1 << 7)	/* Auto MDIX Parameter */
+#define WPPM_TXDIS		(1 << 6)	/* Disable transmitter */
+#define WPPM_DFEF		(1 << 5)	/* Disable Far End Fault */
+#define WPPM_PD			(1 << 4)	/* Power Down */
+#define WPPM_DMDX		(1 << 3)	/* Disable Auto MDI/MDIX */
+#define WPPM_FMDX		(1 << 2)	/* Force MDIX */
+#define WPPM_LPBK		(1 << 1)	/* MAX Loopback */
+
+/* PHY Power Save Register */
+#define PPS_PPSM		(1 << 0)	/* PHY Power Save Mode */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-pci.h b/arch/arm/mach-ks8695/include/mach/regs-pci.h
new file mode 100644
index 000000000000..75a9db6edbd9
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-pci.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-pci.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - PCI bridge registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define KS8695_PCI_OFFSET	(0xF0000 + 0x2000)
+#define KS8695_PCI_VA		(KS8695_IO_VA + KS8695_PCI_OFFSET)
+#define KS8695_PCI_PA		(KS8695_IO_PA + KS8695_PCI_OFFSET)
+
+
+#define KS8695_CRCFID		(0x000)		/* Configuration: Identification */
+#define KS8695_CRCFCS		(0x004)		/* Configuration: Command and Status */
+#define KS8695_CRCFRV		(0x008)		/* Configuration: Revision */
+#define KS8695_CRCFLT		(0x00C)		/* Configuration: Latency Timer */
+#define KS8695_CRCBMA		(0x010)		/* Configuration: Base Memory Address */
+#define KS8695_CRCSID		(0x02C)		/* Configuration: Subsystem ID */
+#define KS8695_CRCFIT		(0x03C)		/* Configuration: Interrupt */
+#define KS8695_PBCA		(0x100)		/* Bridge Configuration Address */
+#define KS8695_PBCD		(0x104)		/* Bridge Configuration Data */
+#define KS8695_PBM		(0x200)		/* Bridge Mode */
+#define KS8695_PBCS		(0x204)		/* Bridge Control and Status */
+#define KS8695_PMBA		(0x208)		/* Bridge Memory Base Address */
+#define KS8695_PMBAC		(0x20C)		/* Bridge Memory Base Address Control */
+#define KS8695_PMBAM		(0x210)		/* Bridge Memory Base Address Mask */
+#define KS8695_PMBAT		(0x214)		/* Bridge Memory Base Address Translation */
+#define KS8695_PIOBA		(0x218)		/* Bridge I/O Base Address */
+#define KS8695_PIOBAC		(0x21C)		/* Bridge I/O Base Address Control */
+#define KS8695_PIOBAM		(0x220)		/* Bridge I/O Base Address Mask */
+#define KS8695_PIOBAT		(0x224)		/* Bridge I/O Base Address Translation */
+
+
+/* Configuration: Identification */
+
+/* Configuration: Command and Status */
+
+/* Configuration: Revision */
+
+
+
+#define CFRV_GUEST		(1 << 23)
+
+#define PBCA_TYPE1		(1)
+#define PBCA_ENABLE		(1 << 31)
+
+
diff --git a/arch/arm/mach-ks8695/include/mach/regs-switch.h b/arch/arm/mach-ks8695/include/mach/regs-switch.h
new file mode 100644
index 000000000000..56d12e8de895
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-switch.h
@@ -0,0 +1,66 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-switch.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - Switch Registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_SWITCH_H
+#define KS8695_SWITCH_H
+
+#define KS8695_SWITCH_OFFSET	(0xF0000 + 0xe800)
+#define KS8695_SWITCH_VA	(KS8695_IO_VA + KS8695_SWITCH_OFFSET)
+#define KS8695_SWITCH_PA	(KS8695_IO_PA + KS8695_SWITCH_OFFSET)
+
+
+/*
+ * Switch registers
+ */
+#define KS8695_SEC0		(0x00)		/* Switch Engine Control 0 */
+#define KS8695_SEC1		(0x04)		/* Switch Engine Control 1 */
+#define KS8695_SEC2		(0x08)		/* Switch Engine Control 2 */
+
+#define KS8695_P(x)_C(z)	(0xc0 + (((x)-1)*3 + ((z)-1))*4)	/* Port Configuration Registers */
+
+#define KS8695_SEP12AN		(0x48)		/* Port 1 & 2 Auto-Negotiation */
+#define KS8695_SEP34AN		(0x4c)		/* Port 3 & 4 Auto-Negotiation */
+#define KS8695_SEIAC		(0x50)		/* Indirect Access Control */
+#define KS8695_SEIADH2		(0x54)		/* Indirect Access Data High 2 */
+#define KS8695_SEIADH1		(0x58)		/* Indirect Access Data High 1 */
+#define KS8695_SEIADL		(0x5c)		/* Indirect Access Data Low */
+#define KS8695_SEAFC		(0x60)		/* Advance Feature Control */
+#define KS8695_SEDSCPH		(0x64)		/* TOS Priority High */
+#define KS8695_SEDSCPL		(0x68)		/* TOS Priority Low */
+#define KS8695_SEMAH		(0x6c)		/* Switch Engine MAC Address High */
+#define KS8695_SEMAL		(0x70)		/* Switch Engine MAC Address Low */
+#define KS8695_LPPM12		(0x74)		/* Port 1 & 2 PHY Power Management */
+#define KS8695_LPPM34		(0x78)		/* Port 3 & 4 PHY Power Management */
+
+
+/* Switch Engine Control 0 */
+#define SEC0_LLED1S		(7 << 25)	/* LED1 Select */
+#define		LLED1S_SPEED		(0 << 25)
+#define		LLED1S_LINK		(1 << 25)
+#define		LLED1S_DUPLEX		(2 << 25)
+#define		LLED1S_COLLISION	(3 << 25)
+#define		LLED1S_ACTIVITY		(4 << 25)
+#define		LLED1S_FDX_COLLISION	(5 << 25)
+#define		LLED1S_LINK_ACTIVITY	(6 << 25)
+#define SEC0_LLED0S		(7 << 22)	/* LED0 Select */
+#define		LLED0S_SPEED		(0 << 22)
+#define		LLED0S_LINK		(1 << 22)
+#define		LLED0S_DUPLEX		(2 << 22)
+#define		LLED0S_COLLISION	(3 << 22)
+#define		LLED0S_ACTIVITY		(4 << 22)
+#define		LLED0S_FDX_COLLISION	(5 << 22)
+#define		LLED0S_LINK_ACTIVITY	(6 << 22)
+#define SEC0_ENABLE		(1 << 0)	/* Enable Switch */
+
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-sys.h b/arch/arm/mach-ks8695/include/mach/regs-sys.h
new file mode 100644
index 000000000000..57c20be0c129
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-sys.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-sys.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - System control registers and bit definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_SYS_H
+#define KS8695_SYS_H
+
+#define KS8695_SYS_OFFSET	(0xF0000 + 0x0000)
+#define KS8695_SYS_VA		(KS8695_IO_VA + KS8695_SYS_OFFSET)
+#define KS8695_SYS_PA		(KS8695_IO_PA + KS8695_SYS_OFFSET)
+
+
+#define KS8695_SYSCFG		(0x00)		/* System Configuration Register */
+#define KS8695_CLKCON		(0x04)		/* System Clock and Bus Control Register */
+
+
+/* System Configuration Register */
+#define SYSCFG_SPRBP		(0x3ff << 16)	/* Register Bank Base Pointer */
+
+/* System Clock and Bus Control Register */
+#define CLKCON_SFMODE		(1 << 8)	/* System Fast Mode for Simulation */
+#define CLKCON_SCDC		(7 << 0)	/* System Clock Divider Select */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-timer.h b/arch/arm/mach-ks8695/include/mach/regs-timer.h
new file mode 100644
index 000000000000..e620cda99d2d
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-timer.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-timer.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Timer registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_TIMER_H
+#define KS8695_TIMER_H
+
+#define KS8695_TMR_OFFSET	(0xF0000 + 0xE400)
+#define KS8695_TMR_VA		(KS8695_IO_VA + KS8695_TMR_OFFSET)
+#define KS8695_TMR_PA		(KS8695_IO_PA + KS8695_TMR_OFFSET)
+
+
+/*
+ * Timer registers
+ */
+#define KS8695_TMCON		(0x00)		/* Timer Control Register */
+#define KS8695_T1TC		(0x04)		/* Timer 1 Timeout Count Register */
+#define KS8695_T0TC		(0x08)		/* Timer 0 Timeout Count Register */
+#define KS8695_T1PD		(0x0C)		/* Timer 1 Pulse Count Register */
+#define KS8695_T0PD		(0x10)		/* Timer 0 Pulse Count Register */
+
+
+/* Timer Control Register */
+#define TMCON_T1EN		(1 << 1)	/* Timer 1 Enable */
+#define TMCON_T0EN		(1 << 0)	/* Timer 0 Enable */
+
+/* Timer0 Timeout Counter Register */
+#define T0TC_WATCHDOG		(0xff)		/* Enable watchdog mode */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-uart.h b/arch/arm/mach-ks8695/include/mach/regs-uart.h
new file mode 100644
index 000000000000..8581fbc6245f
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-uart.h
@@ -0,0 +1,92 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-uart.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - UART register and bit definitions.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef KS8695_UART_H
+#define KS8695_UART_H
+
+#define KS8695_UART_OFFSET	(0xF0000 + 0xE000)
+#define KS8695_UART_VA		(KS8695_IO_VA + KS8695_UART_OFFSET)
+#define KS8695_UART_PA		(KS8695_IO_PA + KS8695_UART_OFFSET)
+
+
+/*
+ * UART registers
+ */
+#define KS8695_URRB	(0x00)		/* Receive Buffer Register */
+#define KS8695_URTH	(0x04)		/* Transmit Holding Register */
+#define KS8695_URFC	(0x08)		/* FIFO Control Register */
+#define KS8695_URLC	(0x0C)		/* Line Control Register */
+#define KS8695_URMC	(0x10)		/* Modem Control Register */
+#define KS8695_URLS	(0x14)		/* Line Status Register */
+#define KS8695_URMS	(0x18)		/* Modem Status Register */
+#define KS8695_URBD	(0x1C)		/* Baud Rate Divisor Register */
+#define KS8695_USR	(0x20)		/* Status Register */
+
+
+/* FIFO Control Register */
+#define URFC_URFRT	(3 << 6)	/* Receive FIFO Trigger Level */
+#define		URFC_URFRT_1	(0 << 6)
+#define		URFC_URFRT_4	(1 << 6)
+#define		URFC_URFRT_8	(2 << 6)
+#define		URFC_URFRT_14	(3 << 6)
+#define URFC_URTFR	(1 << 2)	/* Transmit FIFO Reset */
+#define URFC_URRFR	(1 << 1)	/* Receive FIFO Reset */
+#define URFC_URFE	(1 << 0)	/* FIFO Enable */
+
+/* Line Control Register */
+#define URLC_URSBC	(1 << 6)	/* Set Break Condition */
+#define URLC_PARITY	(7 << 3)	/* Parity */
+#define		URPE_NONE	(0 << 3)
+#define		URPE_ODD	(1 << 3)
+#define		URPE_EVEN	(3 << 3)
+#define		URPE_MARK	(5 << 3)
+#define		URPE_SPACE	(7 << 3)
+#define URLC_URSB	(1 << 2)	/* Stop Bits */
+#define URLC_URCL	(3 << 0)	/* Character Length */
+#define		URCL_5		(0 << 0)
+#define		URCL_6		(1 << 0)
+#define		URCL_7		(2 << 0)
+#define		URCL_8		(3 << 0)
+
+/* Modem Control Register */
+#define URMC_URLB	(1 << 4)	/* Loop-back mode */
+#define URMC_UROUT2	(1 << 3)	/* OUT2 signal */
+#define URMC_UROUT1	(1 << 2)	/* OUT1 signal */
+#define URMC_URRTS	(1 << 1)	/* Request to Send */
+#define URMC_URDTR	(1 << 0)	/* Data Terminal Ready */
+
+/* Line Status Register */
+#define URLS_URRFE	(1 << 7)	/* Receive FIFO Error */
+#define URLS_URTE	(1 << 6)	/* Transmit Empty */
+#define URLS_URTHRE	(1 << 5)	/* Transmit Holding Register Empty */
+#define URLS_URBI	(1 << 4)	/* Break Interrupt */
+#define URLS_URFE	(1 << 3)	/* Framing Error */
+#define URLS_URPE	(1 << 2)	/* Parity Error */
+#define URLS_URROE	(1 << 1)	/* Receive Overrun Error */
+#define URLS_URDR	(1 << 0)	/* Receive Data Ready */
+
+/* Modem Status Register */
+#define URMS_URDCD	(1 << 7)	/* Data Carrier Detect */
+#define URMS_URRI	(1 << 6)	/* Ring Indicator */
+#define URMS_URDSR	(1 << 5)	/* Data Set Ready */
+#define URMS_URCTS	(1 << 4)	/* Clear to Send */
+#define URMS_URDDCD	(1 << 3)	/* Delta Data Carrier Detect */
+#define URMS_URTERI	(1 << 2)	/* Trailing Edge Ring Indicator */
+#define URMS_URDDST	(1 << 1)	/* Delta Data Set Ready */
+#define URMS_URDCTS	(1 << 0)	/* Delta Clear to Send */
+
+/* Status Register */
+#define USR_UTI		(1 << 0)	/* Timeout Indication */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/regs-wan.h b/arch/arm/mach-ks8695/include/mach/regs-wan.h
new file mode 100644
index 000000000000..eb494ec6e956
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/regs-wan.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/regs-wan.h
+ *
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * KS8695 - WAN Registers and bit definitions.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef KS8695_WAN_H
+#define KS8695_WAN_H
+
+#define KS8695_WAN_OFFSET	(0xF0000 + 0x6000)
+#define KS8695_WAN_VA		(KS8695_IO_VA + KS8695_WAN_OFFSET)
+#define KS8695_WAN_PA		(KS8695_IO_PA + KS8695_WAN_OFFSET)
+
+
+/*
+ * WAN registers
+ */
+#define KS8695_WMDTXC		(0x00)		/* DMA Transmit Control */
+#define KS8695_WMDRXC		(0x04)		/* DMA Receive Control */
+#define KS8695_WMDTSC		(0x08)		/* DMA Transmit Start Command */
+#define KS8695_WMDRSC		(0x0c)		/* DMA Receive Start Command */
+#define KS8695_WTDLB		(0x10)		/* Transmit Descriptor List Base Address */
+#define KS8695_WRDLB		(0x14)		/* Receive Descriptor List Base Address */
+#define KS8695_WMAL		(0x18)		/* MAC Station Address Low */
+#define KS8695_WMAH		(0x1c)		/* MAC Station Address High */
+#define KS8695_WMAAL_(n)	(0x80 + ((n)*8))	/* MAC Additional Station Address (0..15) Low */
+#define KS8695_WMAAH_(n)	(0x84 + ((n)*8))	/* MAC Additional Station Address (0..15) High */
+
+
+/* DMA Transmit Control Register */
+#define WMDTXC_WMTRST		(1    << 31)	/* Soft Reset */
+#define WMDTXC_WMTBS		(0x3f << 24)	/* Transmit Burst Size */
+#define WMDTXC_WMTUCG		(1    << 18)	/* Transmit UDP Checksum Generate */
+#define WMDTXC_WMTTCG		(1    << 17)	/* Transmit TCP Checksum Generate */
+#define WMDTXC_WMTICG		(1    << 16)	/* Transmit IP Checksum Generate */
+#define WMDTXC_WMTFCE		(1    <<  9)	/* Transmit Flow Control Enable */
+#define WMDTXC_WMTLB		(1    <<  8)	/* Loopback mode */
+#define WMDTXC_WMTEP		(1    <<  2)	/* Transmit Enable Padding */
+#define WMDTXC_WMTAC		(1    <<  1)	/* Transmit Add CRC */
+#define WMDTXC_WMTE		(1    <<  0)	/* TX Enable */
+
+/* DMA Receive Control Register */
+#define WMDRXC_WMRBS		(0x3f << 24)	/* Receive Burst Size */
+#define WMDRXC_WMRUCC		(1    << 18)	/* Receive UDP Checksum check */
+#define WMDRXC_WMRTCG		(1    << 17)	/* Receive TCP Checksum check */
+#define WMDRXC_WMRICG		(1    << 16)	/* Receive IP Checksum check */
+#define WMDRXC_WMRFCE		(1    <<  9)	/* Receive Flow Control Enable */
+#define WMDRXC_WMRB		(1    <<  6)	/* Receive Broadcast */
+#define WMDRXC_WMRM		(1    <<  5)	/* Receive Multicast */
+#define WMDRXC_WMRU		(1    <<  4)	/* Receive Unicast */
+#define WMDRXC_WMRERR		(1    <<  3)	/* Receive Error Frame */
+#define WMDRXC_WMRA		(1    <<  2)	/* Receive All */
+#define WMDRXC_WMRE		(1    <<  0)	/* RX Enable */
+
+/* Additional Station Address High */
+#define WMAAH_E			(1    << 31)	/* Address Enabled */
+
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
new file mode 100644
index 000000000000..2a6f91869056
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/system.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8695 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <mach/regs-timer.h>
+
+static void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks,
+	 */
+	cpu_do_idle();
+
+}
+
+static void arch_reset(char mode)
+{
+	unsigned int reg;
+
+	if (mode == 's')
+		cpu_reset(0);
+
+	/* disable timer0 */
+	reg = __raw_readl(KS8695_TMR_VA + KS8695_TMCON);
+	__raw_writel(reg & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+
+	/* enable watchdog mode */
+	__raw_writel((10 << 8) | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC);
+
+	/* re-enable timer0 */
+	__raw_writel(reg | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON);
+}
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/timex.h b/arch/arm/mach-ks8695/include/mach/timex.h
new file mode 100644
index 000000000000..4682e350369b
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/timex.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * KS8695 - Time Parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* timers are derived from MCLK, which is 25MHz */
+#define CLOCK_TICK_RATE 25000000
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h
new file mode 100644
index 000000000000..0eee37a69075
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/uncompress.h
+ *
+ * Copyright (C) 2006 Ben Dooks <ben@simtec.co.uk>
+ * Copyright (C) 2006 Simtec Electronics
+ *
+ * KS8695 - Kernel uncompressor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+#include <mach/regs-uart.h>
+
+static void putc(char c)
+{
+	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
+		barrier();
+
+	__raw_writel(c, KS8695_UART_PA + KS8695_URTH);
+}
+
+static inline void flush(void)
+{
+	while (!(__raw_readl(KS8695_UART_PA + KS8695_URLS) & URLS_URTE))
+		barrier();
+}
+
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/vmalloc.h b/arch/arm/mach-ks8695/include/mach/vmalloc.h
new file mode 100644
index 000000000000..744ac66be3a2
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ * arch/arm/mach-ks8695/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2006 Ben Dooks
+ * Copyright (C) 2006 Simtec Electronics <linux@simtec.co.uk>
+ *
+ * KS8695 vmalloc definition
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (KS8695_IO_VA & PGDIR_MASK)
+
+#endif
diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c
index 4c3ab43e1046..e5e71f4dbb84 100644
--- a/arch/arm/mach-ks8695/irq.c
+++ b/arch/arm/mach-ks8695/irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 static void ks8695_irq_mask(unsigned int irqno)
 {
@@ -72,21 +72,21 @@ static int ks8695_irq_set_type(unsigned int irqno, unsigned int type)
 	ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC);
 
 	switch (type) {
-		case IRQT_HIGH:
+		case IRQ_TYPE_LEVEL_HIGH:
 			mode = IOPC_TM_HIGH;
 			level_triggered = 1;
 			break;
-		case IRQT_LOW:
+		case IRQ_TYPE_LEVEL_LOW:
 			mode = IOPC_TM_LOW;
 			level_triggered = 1;
 			break;
-		case IRQT_RISING:
+		case IRQ_TYPE_EDGE_RISING:
 			mode = IOPC_TM_RISING;
 			break;
-		case IRQT_FALLING:
+		case IRQ_TYPE_EDGE_FALLING:
 			mode = IOPC_TM_FALLING;
 			break;
-		case IRQT_BOTHEDGE:
+		case IRQ_TYPE_EDGE_BOTH:
 			mode = IOPC_TM_EDGE;
 			break;
 		default:
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
index d61762ae50d8..184ef74e4bee 100644
--- a/arch/arm/mach-ks8695/leds.c
+++ b/arch/arm/mach-ks8695/leds.c
@@ -12,10 +12,9 @@
 #include <linux/module.h>
 #include <linux/init.h>
 
-#include <asm/mach-types.h>
 #include <asm/leds.h>
-#include <asm/arch/devices.h>
-#include <asm/arch/gpio.h>
+#include <mach/devices.h>
+#include <mach/gpio.h>
 
 
 static inline void ks8695_led_on(unsigned int led)
diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c
index 3f4e0330cb1a..1746c67af176 100644
--- a/arch/arm/mach-ks8695/pci.c
+++ b/arch/arm/mach-ks8695/pci.c
@@ -31,10 +31,10 @@
 #include <asm/io.h>
 #include <asm/signal.h>
 #include <asm/mach/pci.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/devices.h>
-#include <asm/arch/regs-pci.h>
+#include <mach/devices.h>
+#include <mach/regs-pci.h>
 
 
 static int pci_dbg;
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index 02f766b3121d..940888dffc16 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -28,8 +28,8 @@
 #include <asm/io.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/regs-timer.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-timer.h>
+#include <mach/regs-irq.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-l7200/core.c b/arch/arm/mach-l7200/core.c
index 561a0fe7095d..50d23246d4f0 100644
--- a/arch/arm/mach-l7200/core.c
+++ b/arch/arm/mach-l7200/core.c
@@ -13,7 +13,7 @@
 #include <asm/types.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-l7200/include/mach/aux_reg.h b/arch/arm/mach-l7200/include/mach/aux_reg.h
new file mode 100644
index 000000000000..4671558cdd51
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/aux_reg.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-l7200/include/mach/aux_reg.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   08-02-2000	SJH	Created file
+ */
+#ifndef _ASM_ARCH_AUXREG_H
+#define _ASM_ARCH_AUXREG_H
+
+#include <mach/hardware.h>
+
+#define l7200aux_reg	*((volatile unsigned int *) (AUX_BASE))
+
+/*
+ * Auxillary register values
+ */
+#define AUX_CLEAR		0x00000000
+#define AUX_DIAG_LED_ON		0x00000002
+#define AUX_RTS_UART1		0x00000004
+#define AUX_DTR_UART1		0x00000008
+#define AUX_KBD_COLUMN_12_HIGH	0x00000010
+#define AUX_KBD_COLUMN_12_OFF	0x00000020
+#define AUX_KBD_COLUMN_13_HIGH	0x00000040
+#define AUX_KBD_COLUMN_13_OFF	0x00000080
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
new file mode 100644
index 000000000000..34eed2a63e69
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -0,0 +1,40 @@
+/* arch/arm/mach-l7200/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.equ	io_virt, IO_BASE
+		.equ	io_phys, IO_START
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #io_phys		@ physical base address
+		movne	\rx, #io_virt		@ virtual address
+		add	\rx, \rx, #0x00044000	@ UART1
+@		add	\rx, \rx, #0x00045000	@ UART2
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x0]	@ UARTDR
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 5		@ UARTFLGUTXFF - 1 when full
+		bne	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]	@ UARTFLG
+		tst	\rd, #1 << 3		@ UARTFLGUBUSY - 1 when busy
+		bne	1001b
+		.endm
diff --git a/arch/arm/mach-l7200/include/mach/dma.h b/arch/arm/mach-l7200/include/mach/dma.h
new file mode 100644
index 000000000000..c7e48bd4590c
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/dma.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-l7200/include/mach/dma.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  08-29-2000	SJH	Created
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* DMA is not yet implemented! It should be the same as acorn, copy over.. */
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS         0xd0000000
+
+#define DMA_S0                  0
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-l7200/include/mach/entry-macro.S b/arch/arm/mach-l7200/include/mach/entry-macro.S
new file mode 100644
index 000000000000..1726d91fc1d3
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/entry-macro.S
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-l7200/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for L7200-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+
+		.equ	irq_base_addr,	IO_BASE_2
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov     \irqstat, #irq_base_addr		@ Virt addr IRQ regs
+		add	\irqstat, \irqstat, #0x00001000		@ Status reg
+		ldr     \irqstat, [\irqstat, #0]		@ get interrupts
+		mov     \irqnr, #0
+1001:		tst     \irqstat, #1
+		addeq   \irqnr, \irqnr, #1
+		moveq   \irqstat, \irqstat, lsr #1
+		tsteq   \irqnr, #32
+		beq     1001b
+		teq     \irqnr, #32
+		.endm
+
diff --git a/arch/arm/mach-l7200/include/mach/gp_timers.h b/arch/arm/mach-l7200/include/mach/gp_timers.h
new file mode 100644
index 000000000000..2b7086a26b81
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/gp_timers.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-l7200/include/mach/gp_timers.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   07-28-2000	SJH	Created file
+ *   08-02-2000	SJH	Used structure for registers
+ */
+#ifndef _ASM_ARCH_GPTIMERS_H
+#define _ASM_ARCH_GPTIMERS_H
+
+#include <mach/hardware.h>
+
+/*
+ * Layout of L7200 general purpose timer registers
+ */
+struct GPT_Regs {
+	unsigned int TIMERLOAD;
+	unsigned int TIMERVALUE;
+	unsigned int TIMERCONTROL;
+	unsigned int TIMERCLEAR;
+};
+
+#define GPT_BASE		(IO_BASE_2 + 0x3000)
+#define l7200_timer1_regs	((volatile struct GPT_Regs *) (GPT_BASE))
+#define l7200_timer2_regs	((volatile struct GPT_Regs *) (GPT_BASE + 0x20))
+
+/*
+ * General register values
+ */
+#define	GPT_PRESCALE_1		0x00000000
+#define	GPT_PRESCALE_16		0x00000004
+#define	GPT_PRESCALE_256	0x00000008
+#define GPT_MODE_FREERUN	0x00000000
+#define GPT_MODE_PERIODIC	0x00000040
+#define GPT_ENABLE		0x00000080
+#define GPT_BZTOG		0x00000100
+#define GPT_BZMOD		0x00000200
+#define GPT_LOAD_MASK 		0x0000ffff
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/gpio.h b/arch/arm/mach-l7200/include/mach/gpio.h
new file mode 100644
index 000000000000..c7b0a5d7b8bb
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/gpio.h
@@ -0,0 +1,105 @@
+/****************************************************************************/
+/*
+ *      arch/arm/mach-l7200/include/mach/gpio.h
+ *
+ *      Registers and  helper functions for the L7200 Link-Up Systems
+ *      GPIO.
+ *
+ *      (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define GPIO_OFF   0x00005000  /* Offset from IO_START to the GPIO reg's. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define GPIO_START (IO_START_2 + GPIO_OFF) /* Physical addr of the GPIO reg. */
+#define GPIO_BASE  (IO_BASE_2  + GPIO_OFF) /* Virtual addr of the GPIO reg. */
+
+/* Offsets from the start of the GPIO for all the registers. */
+#define PADR_OFF     0x000
+#define PADDR_OFF    0x004
+#define PASBSR_OFF   0x008
+#define PAEENR_OFF   0x00c
+#define PAESNR_OFF   0x010
+#define PAESTR_OFF   0x014
+#define PAIMR_OFF    0x018
+#define PAINT_OFF    0x01c
+
+#define PBDR_OFF     0x020
+#define PBDDR_OFF    0x024
+#define PBSBSR_OFF   0x028
+#define PBIMR_OFF    0x038
+#define PBINT_OFF    0x03c
+
+#define PCDR_OFF     0x040
+#define PCDDR_OFF    0x044
+#define PCSBSR_OFF   0x048
+#define PCIMR_OFF    0x058
+#define PCINT_OFF    0x05c
+
+#define PDDR_OFF     0x060
+#define PDDDR_OFF    0x064
+#define PDSBSR_OFF   0x068
+#define PDEENR_OFF   0x06c
+#define PDESNR_OFF   0x070
+#define PDESTR_OFF   0x074
+#define PDIMR_OFF    0x078
+#define PDINT_OFF    0x07c
+
+#define PEDR_OFF     0x080
+#define PEDDR_OFF    0x084
+#define PESBSR_OFF   0x088
+#define PEEENR_OFF   0x08c
+#define PEESNR_OFF   0x090
+#define PEESTR_OFF   0x094
+#define PEIMR_OFF    0x098
+#define PEINT_OFF    0x09c
+
+/* Define the GPIO registers for use by device drivers and the kernel. */
+#define PADR   (*(volatile unsigned long *)(GPIO_BASE+PADR_OFF))
+#define PADDR  (*(volatile unsigned long *)(GPIO_BASE+PADDR_OFF))
+#define PASBSR (*(volatile unsigned long *)(GPIO_BASE+PASBSR_OFF))
+#define PAEENR (*(volatile unsigned long *)(GPIO_BASE+PAEENR_OFF))
+#define PAESNR (*(volatile unsigned long *)(GPIO_BASE+PAESNR_OFF))
+#define PAESTR (*(volatile unsigned long *)(GPIO_BASE+PAESTR_OFF))
+#define PAIMR  (*(volatile unsigned long *)(GPIO_BASE+PAIMR_OFF))
+#define PAINT  (*(volatile unsigned long *)(GPIO_BASE+PAINT_OFF))
+
+#define PBDR   (*(volatile unsigned long *)(GPIO_BASE+PBDR_OFF))
+#define PBDDR  (*(volatile unsigned long *)(GPIO_BASE+PBDDR_OFF))
+#define PBSBSR (*(volatile unsigned long *)(GPIO_BASE+PBSBSR_OFF))
+#define PBIMR  (*(volatile unsigned long *)(GPIO_BASE+PBIMR_OFF))
+#define PBINT  (*(volatile unsigned long *)(GPIO_BASE+PBINT_OFF))
+
+#define PCDR   (*(volatile unsigned long *)(GPIO_BASE+PCDR_OFF))
+#define PCDDR  (*(volatile unsigned long *)(GPIO_BASE+PCDDR_OFF))
+#define PCSBSR (*(volatile unsigned long *)(GPIO_BASE+PCSBSR_OFF))
+#define PCIMR  (*(volatile unsigned long *)(GPIO_BASE+PCIMR_OFF))
+#define PCINT  (*(volatile unsigned long *)(GPIO_BASE+PCINT_OFF))
+
+#define PDDR   (*(volatile unsigned long *)(GPIO_BASE+PDDR_OFF))
+#define PDDDR  (*(volatile unsigned long *)(GPIO_BASE+PDDDR_OFF))
+#define PDSBSR (*(volatile unsigned long *)(GPIO_BASE+PDSBSR_OFF))
+#define PDEENR (*(volatile unsigned long *)(GPIO_BASE+PDEENR_OFF))
+#define PDESNR (*(volatile unsigned long *)(GPIO_BASE+PDESNR_OFF))
+#define PDESTR (*(volatile unsigned long *)(GPIO_BASE+PDESTR_OFF))
+#define PDIMR  (*(volatile unsigned long *)(GPIO_BASE+PDIMR_OFF))
+#define PDINT  (*(volatile unsigned long *)(GPIO_BASE+PDINT_OFF))
+
+#define PEDR   (*(volatile unsigned long *)(GPIO_BASE+PEDR_OFF))
+#define PEDDR  (*(volatile unsigned long *)(GPIO_BASE+PEDDR_OFF))
+#define PESBSR (*(volatile unsigned long *)(GPIO_BASE+PESBSR_OFF))
+#define PEEENR (*(volatile unsigned long *)(GPIO_BASE+PEEENR_OFF))
+#define PEESNR (*(volatile unsigned long *)(GPIO_BASE+PEESNR_OFF))
+#define PEESTR (*(volatile unsigned long *)(GPIO_BASE+PEESTR_OFF))
+#define PEIMR  (*(volatile unsigned long *)(GPIO_BASE+PEIMR_OFF))
+#define PEINT  (*(volatile unsigned long *)(GPIO_BASE+PEINT_OFF))
+
+#define VEE_EN         0x02
+#define BACKLIGHT_EN   0x04
diff --git a/arch/arm/mach-l7200/include/mach/hardware.h b/arch/arm/mach-l7200/include/mach/hardware.h
new file mode 100644
index 000000000000..c31909cfc254
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/hardware.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-l7200/include/mach/hardware.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * This file contains the hardware definitions for the 
+ * LinkUp Systems L7200 SOC development board.
+ *
+ * Changelog:
+ *   02-01-2000	 RS	Created L7200 version, derived from rpc code
+ *   03-21-2000	SJH	Cleaned up file
+ *   04-21-2000	 RS 	Changed mapping of I/O in virtual space
+ *   04-25-2000	SJH	Removed unused symbols and such
+ *   05-05-2000	SJH	Complete rewrite
+ *   07-31-2000	SJH	Added undocumented debug auxillary port to
+ *			get at last two columns for keyboard driver
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RAM_START		0xf0000000
+#define RAM_SIZE		0x02000000
+#define RAM_BASE		0xc0000000
+
+#define IO_START		0x80000000      /* I/O */
+#define IO_SIZE			0x01000000
+#define IO_BASE			0xd0000000
+
+#define IO_START_2		0x90000000      /* I/O */
+#define IO_SIZE_2		0x01000000
+#define IO_BASE_2		0xd1000000
+
+#define AUX_START		0x1a000000      /* AUX PORT */
+#define AUX_SIZE 		0x01000000
+#define AUX_BASE		0xd2000000
+
+#define FLASH1_START		0x00000000      /* FLASH BANK 1 */
+#define FLASH1_SIZE 		0x01000000
+#define FLASH1_BASE		0xd3000000
+
+#define FLASH2_START		0x10000000      /* FLASH BANK 2 */
+#define FLASH2_SIZE 		0x01000000
+#define FLASH2_BASE		0xd4000000
+
+#define ISA_START		0x20000000	/* ISA */
+#define ISA_SIZE		0x20000000
+#define ISA_BASE		0xe0000000
+
+#define PCIO_BASE		IO_BASE
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/io.h b/arch/arm/mach-l7200/include/mach/io.h
new file mode 100644
index 000000000000..d432ba9e5dff
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/io.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-l7200/include/mach/io.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  03-21-2000	SJH	Created from arch/arm/mach-nexuspci/include/mach/io.h
+ *  08-31-2000	SJH	Added in IO functions necessary for new drivers
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * There are not real ISA nor PCI buses, so we fake it.
+ */
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)	__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/irqs.h b/arch/arm/mach-l7200/include/mach/irqs.h
new file mode 100644
index 000000000000..7edffd713c5b
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/irqs.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-l7200/include/mach/irqs.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   01-02-2000 RS	Create l7200 version
+ *   03-28-2000 SJH	Removed unused interrupt
+ *   07-28-2000 SJH	Added pseudo-keyboard interrupt
+ */
+
+/*
+ * NOTE: The second timer (Timer 2) is used as the keyboard
+ *       interrupt when the keyboard driver is enabled.
+ */
+
+#define NR_IRQS          32
+
+#define IRQ_STWDOG        0   /* Watchdog timer */
+#define IRQ_PROG          1   /* Programmable interrupt */
+#define IRQ_DEBUG_RX      2   /* Comm Rx debug */
+#define IRQ_DEBUG_TX      3   /* Comm Tx debug */
+#define IRQ_GCTC1         4   /* Timer 1 */
+#define IRQ_GCTC2         5   /* Timer 2 / Keyboard */
+#define IRQ_DMA           6   /* DMA controller */
+#define IRQ_CLCD          7   /* Color LCD controller */
+#define IRQ_SM_RX         8   /* Smart card */
+#define IRQ_SM_TX         9   /* Smart cart */
+#define IRQ_SM_RST       10   /* Smart card */
+#define IRQ_SIB          11   /* Serial Interface Bus */
+#define IRQ_MMC          12   /* MultiMediaCard */
+#define IRQ_SSP1         13   /* Synchronous Serial Port 1 */
+#define IRQ_SSP2         14   /* Synchronous Serial Port 1 */
+#define IRQ_SPI          15   /* SPI slave */
+#define IRQ_UART_1       16   /* UART 1 */
+#define IRQ_UART_2       17   /* UART 2 */
+#define IRQ_IRDA         18   /* IRDA */
+#define IRQ_RTC_TICK     19   /* Real Time Clock tick */
+#define IRQ_RTC_ALARM    20   /* Real Time Clock alarm */
+#define IRQ_GPIO         21   /* General Purpose IO */
+#define IRQ_GPIO_DMA     22   /* General Purpose IO, DMA */
+#define IRQ_M2M          23   /* Memory to memory DMA  */
+#define IRQ_RESERVED     24   /* RESERVED, don't use */
+#define IRQ_INTF         25   /* External active low interrupt */
+#define IRQ_INT0         26   /* External active low interrupt */
+#define IRQ_INT1         27   /* External active low interrupt */
+#define IRQ_INT2         28   /* External active low interrupt */
+#define IRQ_UCB1200      29   /* Interrupt generated by UCB1200*/
+#define IRQ_BAT_LO       30   /* Low batery or external power */
+#define IRQ_MEDIA_CHG    31   /* Media change interrupt */
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START	64
diff --git a/arch/arm/mach-l7200/include/mach/memory.h b/arch/arm/mach-l7200/include/mach/memory.h
new file mode 100644
index 000000000000..f338cf3ffd93
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/memory.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-l7200/include/mach/memory.h
+ *
+ * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
+ * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *
+ * Changelog:
+ *  03-13-2000	SJH	Created
+ *  04-13-2000  RS      Changed bus macros for new addr
+ *  05-03-2000  SJH     Removed bus macros and fixed virt_to_phys macro
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset on the L7200 SDB.
+ */
+#define PHYS_OFFSET     UL(0xf0000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Cache flushing area - ROM
+ */
+#define FLUSH_BASE_PHYS		0x40000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/pmpcon.h b/arch/arm/mach-l7200/include/mach/pmpcon.h
new file mode 100644
index 000000000000..3959871e8361
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/pmpcon.h
@@ -0,0 +1,46 @@
+/****************************************************************************/
+/*
+ *  arch/arm/mach-l7200/include/mach/pmpcon.h
+ *
+ *   Registers and  helper functions for the L7200 Link-Up Systems
+ *   DC/DC converter register.
+ *
+ *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define PMPCON_OFF 0x00006000  /* Offset from IO_START_2. */
+
+/* IO_START_2 and IO_BASE_2 are defined in hardware.h */
+
+#define PMPCON_START (IO_START_2 + PMPCON_OFF)  /* Physical address of reg. */
+#define PMPCON_BASE  (IO_BASE_2  + PMPCON_OFF)  /* Virtual address of reg. */
+
+
+#define PMPCON (*(volatile unsigned int *)(PMPCON_BASE))
+
+#define PWM2_50CYCLE 0x800
+#define CONTRAST     0x9
+
+#define PWM1H (CONTRAST)
+#define PWM1L (CONTRAST << 4)
+
+#define PMPCON_VALUE  (PWM2_50CYCLE | PWM1L | PWM1H) 
+	
+/* PMPCON = 0x811;   // too light and fuzzy
+ * PMPCON = 0x844;   
+ * PMPCON = 0x866;   // better color poor depth
+ * PMPCON = 0x888;   // Darker but better depth 
+ * PMPCON = 0x899;   // Darker even better depth
+ * PMPCON = 0x8aa;   // too dark even better depth
+ * PMPCON = 0X8cc;   // Way too dark
+ */
+
+/* As CONTRAST value increases the greater the depth perception and
+ * the darker the colors.
+ */
diff --git a/arch/arm/mach-l7200/include/mach/pmu.h b/arch/arm/mach-l7200/include/mach/pmu.h
new file mode 100644
index 000000000000..a2da7aedf208
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/pmu.h
@@ -0,0 +1,125 @@
+/****************************************************************************/
+/*
+ *  arch/arm/mach-l7200/include/mach/pmu.h
+ *
+ *   Registers and  helper functions for the L7200 Link-Up Systems
+ *   Power Management Unit (PMU).
+ *
+ *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define PMU_OFF   0x00050000  /* Offset from IO_START to the PMU registers. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define PMU_START (IO_START + PMU_OFF)  /* Physical addr. of the PMU reg. */
+#define PMU_BASE  (IO_BASE  + PMU_OFF)  /* Virtual addr. of the PMU reg. */
+
+
+/* Define the PMU registers for use by device drivers and the kernel. */
+
+typedef struct {
+     unsigned int CURRENT;  /* Current configuration register */
+     unsigned int NEXT;     /* Next configuration register */
+     unsigned int reserved;
+     unsigned int RUN;      /* Run configuration register */
+     unsigned int COMM;     /* Configuration command register */
+     unsigned int SDRAM;    /* SDRAM configuration bypass register */
+} pmu_interface;
+
+#define PMU ((volatile pmu_interface *)(PMU_BASE))
+
+
+/* Macro's for reading the common register fields. */
+
+#define GET_TRANSOP(reg)  ((reg >> 25) & 0x03) /* Bits 26-25 */
+#define GET_OSCEN(reg)    ((reg >> 16) & 0x01)
+#define GET_OSCMUX(reg)   ((reg >> 15) & 0x01)
+#define GET_PLLMUL(reg)   ((reg >>  9) & 0x3f) /* Bits 14-9 */
+#define GET_PLLEN(reg)    ((reg >>  8) & 0x01)
+#define GET_PLLMUX(reg)   ((reg >>  7) & 0x01)
+#define GET_BCLK_DIV(reg) ((reg >>  3) & 0x03) /* Bits 4-3 */
+#define GET_SDRB_SEL(reg) ((reg >>  2) & 0x01)
+#define GET_SDRF_SEL(reg) ((reg >>  1) & 0x01)
+#define GET_FASTBUS(reg)  (reg & 0x1)
+
+/* CFG_NEXT register */
+
+#define CFG_NEXT_CLOCKRECOVERY ((PMU->NEXT >> 18) & 0x7f)   /* Bits 24-18 */
+#define CFG_NEXT_INTRET        ((PMU->NEXT >> 17) & 0x01)
+#define CFG_NEXT_SDR_STOP      ((PMU->NEXT >>  6) & 0x01)
+#define CFG_NEXT_SYSCLKEN      ((PMU->NEXT >>  5) & 0x01)
+
+/* Useful field values that can be used to construct the
+ * CFG_NEXT and CFG_RUN registers.
+ */
+
+#define TRANSOP_NOP      0<<25  /* NOCHANGE_NOSTALL */
+#define NOCHANGE_STALL   1<<25
+#define CHANGE_NOSTALL   2<<25
+#define CHANGE_STALL     3<<25
+
+#define INTRET           1<<17
+#define OSCEN            1<<16
+#define OSCMUX           1<<15
+
+/* PLL frequencies */
+
+#define PLLMUL_0         0<<9         /*  3.6864 MHz */
+#define PLLMUL_1         1<<9         /*  ?????? MHz */
+#define PLLMUL_5         5<<9         /*  18.432 MHz */
+#define PLLMUL_10       10<<9         /*  36.864 MHz */
+#define PLLMUL_18       18<<9         /*  ?????? MHz */
+#define PLLMUL_20       20<<9         /*  73.728 MHz */
+#define PLLMUL_32       32<<9         /*  ?????? MHz */
+#define PLLMUL_35       35<<9         /* 129.024 MHz */
+#define PLLMUL_36       36<<9         /*  ?????? MHz */
+#define PLLMUL_39       39<<9         /*  ?????? MHz */
+#define PLLMUL_40       40<<9         /* 147.456 MHz */
+
+/* Clock recovery times */
+
+#define CRCLOCK_1        1<<18
+#define CRCLOCK_2        2<<18
+#define CRCLOCK_4        4<<18
+#define CRCLOCK_8        8<<18
+#define CRCLOCK_16      16<<18
+#define CRCLOCK_32      32<<18
+#define CRCLOCK_63      63<<18
+#define CRCLOCK_127    127<<18
+
+#define PLLEN            1<<8
+#define PLLMUX           1<<7
+#define SDR_STOP         1<<6
+#define SYSCLKEN         1<<5
+
+#define BCLK_DIV_4       2<<3
+#define BCLK_DIV_2       1<<3
+#define BCLK_DIV_1       0<<3
+
+#define SDRB_SEL         1<<2
+#define SDRF_SEL         1<<1
+#define FASTBUS          1<<0
+
+
+/* CFG_SDRAM */
+
+#define SDRREFFQ         1<<0  /* Only if SDRSTOPRQ is not set. */
+#define SDRREFACK        1<<1  /* Read-only */
+#define SDRSTOPRQ        1<<2  /* Only if SDRREFFQ is not set. */
+#define SDRSTOPACK       1<<3  /* Read-only */
+#define PICEN            1<<4  /* Enable Co-procesor */
+#define PICTEST          1<<5
+
+#define GET_SDRREFFQ    ((PMU->SDRAM >> 0) & 0x01)
+#define GET_SDRREFACK   ((PMU->SDRAM >> 1) & 0x01) /* Read-only */
+#define GET_SDRSTOPRQ   ((PMU->SDRAM >> 2) & 0x01)
+#define GET_SDRSTOPACK  ((PMU->SDRAM >> 3) & 0x01) /* Read-only */
+#define GET_PICEN       ((PMU->SDRAM >> 4) & 0x01)
+#define GET_PICTEST     ((PMU->SDRAM >> 5) & 0x01)
diff --git a/arch/arm/mach-l7200/include/mach/serial.h b/arch/arm/mach-l7200/include/mach/serial.h
new file mode 100644
index 000000000000..adc05e5f8378
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/serial.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-l7200/include/mach/serial.h
+ *
+ * Copyright (c) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  03-20-2000  SJH     Created
+ *  03-26-2000  SJH     Added flags for serial ports
+ *  03-27-2000  SJH     Corrected BASE_BAUD value
+ *  04-14-2000  RS      Made register addr dependent on IO_BASE
+ *  05-03-2000  SJH     Complete rewrite
+ *  05-09-2000	SJH	Stripped out architecture specific serial stuff
+ *                      and placed it in a separate file
+ *  07-28-2000	SJH	Moved base baud rate variable
+ */
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+/*
+ * This assumes you have a 3.6864 MHz clock for your UART.
+ */
+#define BASE_BAUD	3686400
+
+/*
+ * Standard COM flags
+ */
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#define STD_SERIAL_PORT_DEFNS		\
+	/* MAGIC UART CLK   PORT       IRQ     FLAGS */			\
+	{ 0, BASE_BAUD, UART1_BASE, IRQ_UART_1, STD_COM_FLAGS },  /* ttyLU0 */ \
+	{ 0, BASE_BAUD, UART2_BASE, IRQ_UART_2, STD_COM_FLAGS },  /* ttyLU1 */ \
+
+#define EXTRA_SERIAL_PORT_DEFNS
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/serial_l7200.h b/arch/arm/mach-l7200/include/mach/serial_l7200.h
new file mode 100644
index 000000000000..645f1c5e568d
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/serial_l7200.h
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-l7200/include/mach/serial_l7200.h
+ *
+ * Copyright (c) 2000 Steven Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  05-09-2000	SJH	Created
+ */
+#ifndef __ASM_ARCH_SERIAL_L7200_H
+#define __ASM_ARCH_SERIAL_L7200_H
+
+#include <mach/memory.h>
+
+/*
+ * This assumes you have a 3.6864 MHz clock for your UART.
+ */
+#define BASE_BAUD 3686400
+
+/*
+ * UART base register addresses
+ */
+#define UART1_BASE	(IO_BASE + 0x00044000)
+#define UART2_BASE	(IO_BASE + 0x00045000)
+
+/*
+ * UART register offsets
+ */
+#define UARTDR			0x00	/* Tx/Rx data */
+#define RXSTAT			0x04	/* Rx status */
+#define H_UBRLCR		0x08	/* mode register high */
+#define M_UBRLCR		0x0C	/* mode reg mid (MSB of baud)*/
+#define L_UBRLCR		0x10	/* mode reg low (LSB of baud)*/
+#define UARTCON			0x14	/* control register */
+#define UARTFLG			0x18	/* flag register */
+#define UARTINTSTAT		0x1C	/* FIFO IRQ status register */
+#define UARTINTMASK		0x20	/* FIFO IRQ mask register */
+
+/*
+ * UART baud rate register values
+ */
+#define BR_110			0x827
+#define BR_1200			0x06e
+#define BR_2400			0x05f
+#define BR_4800			0x02f
+#define BR_9600			0x017
+#define BR_14400		0x00f
+#define BR_19200		0x00b
+#define BR_38400		0x005
+#define BR_57600		0x003
+#define BR_76800 		0x002
+#define BR_115200		0x001
+
+/*
+ * Receiver status register (RXSTAT) mask values
+ */
+#define RXSTAT_NO_ERR		0x00	/* No error */
+#define RXSTAT_FRM_ERR		0x01	/* Framing error */
+#define RXSTAT_PAR_ERR		0x02	/* Parity error */
+#define RXSTAT_OVR_ERR		0x04	/* Overrun error */
+
+/*
+ * High byte of UART bit rate and line control register (H_UBRLCR) values
+ */
+#define UBRLCR_BRK		0x01	/* generate break on tx */
+#define UBRLCR_PEN		0x02	/* enable parity */
+#define UBRLCR_PDIS		0x00	/* disable parity */
+#define UBRLCR_EVEN		0x04	/* 1= even parity,0 = odd parity */
+#define UBRLCR_STP2		0x08	/* transmit 2 stop bits */
+#define UBRLCR_FIFO		0x10	/* enable FIFO */
+#define UBRLCR_LEN5		0x60	/* word length5 */
+#define UBRLCR_LEN6		0x40	/* word length6 */
+#define UBRLCR_LEN7		0x20	/* word length7 */
+#define UBRLCR_LEN8		0x00	/* word length8 */
+
+/*
+ * UART control register (UARTCON) values
+ */
+#define UARTCON_UARTEN		0x01	/* Enable UART */
+#define UARTCON_DMAONERR	0x08	/* Mask RxDmaRq when errors occur */
+
+/*
+ * UART flag register (UARTFLG) mask values
+ */
+#define UARTFLG_UTXFF		0x20	/* Transmit FIFO full */
+#define UARTFLG_URXFE		0x10	/* Receiver FIFO empty */
+#define UARTFLG_UBUSY		0x08	/* Transmitter busy */
+#define UARTFLG_DCD		0x04	/* Data carrier detect */
+#define UARTFLG_DSR		0x02	/* Data set ready */
+#define UARTFLG_CTS		0x01	/* Clear to send */
+
+/*
+ * UART interrupt status/clear registers (UARTINTSTAT/CLR) values
+ */
+#define UART_TXINT		0x01	/* TX interrupt */
+#define UART_RXINT		0x02	/* RX interrupt */
+#define UART_RXERRINT		0x04	/* RX error interrupt */
+#define UART_MSINT		0x08	/* Modem Status interrupt */
+#define UART_UDINT		0x10	/* UART Disabled interrupt */
+#define UART_ALLIRQS		0x1f	/* All interrupts */
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/sib.h b/arch/arm/mach-l7200/include/mach/sib.h
new file mode 100644
index 000000000000..965728712cf3
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/sib.h
@@ -0,0 +1,119 @@
+/****************************************************************************/
+/*
+ *  arch/arm/mach-l7200/include/mach/sib.h
+ *
+ *  Registers and helper functions for the Serial Interface Bus.
+ *
+ *  (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define SIB_OFF   0x00040000  /* Offset from IO_START to the SIB reg's. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define SIB_START (IO_START + SIB_OFF) /* Physical addr of the SIB reg. */
+#define SIB_BASE  (IO_BASE  + SIB_OFF) /* Virtual addr of the SIB reg.  */
+
+/* Offsets from the start of the SIB for all the registers. */
+
+/* Define the SIB registers for use by device drivers and the kernel. */
+
+typedef struct
+{
+     unsigned int MCCR;    /* SIB Control Register           Offset: 0x00 */
+     unsigned int RES1;    /* Reserved                       Offset: 0x04 */
+     unsigned int MCDR0;   /* SIB Data Register 0            Offset: 0x08 */
+     unsigned int MCDR1;   /* SIB Data Register 1            Offset: 0x0c */
+     unsigned int MCDR2;   /* SIB Data Register 2 (UCB1x00)  Offset: 0x10 */
+     unsigned int RES2;    /* Reserved                       Offset: 0x14 */
+     unsigned int MCSR;    /* SIB Status Register            Offset: 0x18 */
+} SIB_Interface;
+
+#define SIB ((volatile SIB_Interface *) (SIB_BASE))
+
+/* MCCR */
+
+#define INTERNAL_FREQ   9216000  /* Hertz */
+#define AUDIO_FREQ         5000  /* Hertz */
+#define TELECOM_FREQ       5000  /* Hertz */
+
+#define AUDIO_DIVIDE    (INTERNAL_FREQ / (32 * AUDIO_FREQ))
+#define TELECOM_DIVIDE  (INTERNAL_FREQ / (32 * TELECOM_FREQ))
+
+#define MCCR_ASD57      AUDIO_DIVIDE
+#define MCCR_TSD57      (TELECOM_DIVIDE << 8)
+#define MCCR_MCE        (1 << 16)             /* SIB enable */
+#define MCCR_ECS        (1 << 17)             /* External Clock Select */
+#define MCCR_ADM        (1 << 18)             /* A/D Data Sampling */
+#define MCCR_PMC        (1 << 26)             /* PIN Multiplexer Control */
+
+
+#define GET_ASD ((SIB->MCCR >>  0) & 0x3f) /* Audio Sample Rate Div. */
+#define GET_TSD ((SIB->MCCR >>  8) & 0x3f) /* Telcom Sample Rate Div. */
+#define GET_MCE ((SIB->MCCR >> 16) & 0x01) /* SIB Enable */
+#define GET_ECS ((SIB->MCCR >> 17) & 0x01) /* External Clock Select */
+#define GET_ADM ((SIB->MCCR >> 18) & 0x01) /* A/D Data Sampling Mode */
+#define GET_TTM ((SIB->MCCR >> 19) & 0x01) /* Telco Trans. FIFO I mask */ 
+#define GET_TRM ((SIB->MCCR >> 20) & 0x01) /* Telco Recv. FIFO I mask */
+#define GET_ATM ((SIB->MCCR >> 21) & 0x01) /* Audio Trans. FIFO I mask */ 
+#define GET_ARM ((SIB->MCCR >> 22) & 0x01) /* Audio Recv. FIFO I mask */
+#define GET_LBM ((SIB->MCCR >> 23) & 0x01) /* Loop Back Mode */
+#define GET_ECP ((SIB->MCCR >> 24) & 0x03) /* Extern. Clck Prescale sel */
+#define GET_PMC ((SIB->MCCR >> 26) & 0x01) /* PIN Multiplexer Control */
+#define GET_ERI ((SIB->MCCR >> 27) & 0x01) /* External Read Interrupt */
+#define GET_EWI ((SIB->MCCR >> 28) & 0x01) /* External Write Interrupt */
+
+/* MCDR0 */
+
+#define AUDIO_RECV     ((SIB->MCDR0 >> 4) & 0xfff)
+#define AUDIO_WRITE(v) ((SIB->MCDR0 = (v & 0xfff) << 4))
+
+/* MCDR1 */
+
+#define TELECOM_RECV     ((SIB->MCDR1 >> 2) & 032fff)
+#define TELECOM_WRITE(v) ((SIB->MCDR1 = (v & 0x3fff) << 2))
+
+
+/* MCSR */
+
+#define MCSR_ATU (1 << 4)  /* Audio Transmit FIFO Underrun */
+#define MCSR_ARO (1 << 5)  /* Audio Receive  FIFO Underrun */
+#define MCSR_TTU (1 << 6)  /* TELECOM Transmit FIFO Underrun */
+#define MCSR_TRO (1 << 7)  /* TELECOM Receive  FIFO Underrun */
+
+#define MCSR_CLEAR_UNDERUN_BITS (MCSR_ATU | MCSR_ARO | MCSR_TTU | MCSR_TRO)
+
+
+#define GET_ATS ((SIB->MCSR >>  0) & 0x01) /* Audio Transmit FIFO Service Req*/
+#define GET_ARS ((SIB->MCSR >>  1) & 0x01) /* Audio Recv FIFO Service Request*/
+#define GET_TTS ((SIB->MCSR >>  2) & 0x01) /* TELECOM Transmit FIFO  Flag */
+#define GET_TRS ((SIB->MCSR >>  3) & 0x01) /* TELECOM Recv FIFO Service Req. */
+#define GET_ATU ((SIB->MCSR >>  4) & 0x01) /* Audio Transmit FIFO Underrun */
+#define GET_ARO ((SIB->MCSR >>  5) & 0x01) /* Audio Receive  FIFO Underrun */
+#define GET_TTU ((SIB->MCSR >>  6) & 0x01) /* TELECOM Transmit FIFO Underrun */
+#define GET_TRO ((SIB->MCSR >>  7) & 0x01) /* TELECOM Receive  FIFO Underrun */
+#define GET_ANF ((SIB->MCSR >>  8) & 0x01) /* Audio Transmit FIFO not full */
+#define GET_ANE ((SIB->MCSR >>  9) & 0x01) /* Audio Receive FIFO not empty */
+#define GET_TNF ((SIB->MCSR >> 10) & 0x01) /* Telecom Transmit FIFO not full */
+#define GET_TNE ((SIB->MCSR >> 11) & 0x01) /* Telecom Receive FIFO not empty */
+#define GET_CWC ((SIB->MCSR >> 12) & 0x01) /* Codec Write Complete */
+#define GET_CRC ((SIB->MCSR >> 13) & 0x01) /* Codec Read Complete */
+#define GET_ACE ((SIB->MCSR >> 14) & 0x01) /* Audio Codec Enabled */
+#define GET_TCE ((SIB->MCSR >> 15) & 0x01) /* Telecom Codec Enabled */
+
+/* MCDR2 */
+
+#define MCDR2_rW               (1 << 16)
+
+#define WRITE_MCDR2(reg, data) (SIB->MCDR2 =((reg<<17)|MCDR2_rW|(data&0xffff)))
+#define MCDR2_WRITE_COMPLETE   GET_CWC
+
+#define INITIATE_MCDR2_READ(reg) (SIB->MCDR2 = (reg << 17))
+#define MCDR2_READ_COMPLETE      GET_CRC
+#define MCDR2_READ               (SIB->MCDR2 & 0xffff)
diff --git a/arch/arm/mach-l7200/include/mach/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h
new file mode 100644
index 000000000000..2d7722be60ea
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/sys-clock.h
@@ -0,0 +1,67 @@
+/****************************************************************************/
+/*
+ *  arch/arm/mach-l7200/include/mach/sys-clock.h
+ *
+ *   Registers and  helper functions for the L7200 Link-Up Systems
+ *   System clocks.
+ *
+ *   (C) Copyright 2000, S A McConnell  (samcconn@cotw.com)
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License. See the file COPYING in the main directory of this archive for
+ *  more details.
+ */
+
+/****************************************************************************/
+
+#define SYS_CLOCK_OFF   0x00050030  /* Offset from IO_START. */
+
+/* IO_START and IO_BASE are defined in hardware.h */
+
+#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF)  /* Physical address */
+#define SYS_CLOCK_BASE  (IO_BASE  + SYS_CLOCK_OFF)  /* Virtual address  */
+
+/* Define the interface to the SYS_CLOCK */
+
+typedef struct
+{
+     unsigned int ENABLE;
+     unsigned int ESYNC;
+     unsigned int SELECT;
+} sys_clock_interface;
+
+#define SYS_CLOCK   ((volatile sys_clock_interface *)(SYS_CLOCK_BASE))
+
+//#define CLOCK_EN    (*(volatile unsigned long *)(PMU_BASE+CLOCK_EN_OFF))
+//#define CLOCK_ESYNC (*(volatile unsigned long *)(PMU_BASE+CLOCK_ESYNC_OFF))
+//#define CLOCK_SEL   (*(volatile unsigned long *)(PMU_BASE+CLOCK_SEL_OFF))
+
+/* SYS_CLOCK -> ENABLE */
+
+#define SYN_EN          1<<0
+#define B18M_EN         1<<1
+#define CLK3M6_EN       1<<2
+#define BUART_EN        1<<3
+#define CLK18MU_EN      1<<4
+#define FIR_EN          1<<5
+#define MIRN_EN         1<<6
+#define UARTM_EN        1<<7
+#define SIBADC_EN       1<<8
+#define ALTD_EN         1<<9
+#define CLCLK_EN        1<<10
+
+/* SYS_CLOCK -> SELECT */
+
+#define CLK18M_DIV      1<<0
+#define MIR_SEL         1<<1
+#define SSP_SEL         1<<4
+#define MM_DIV          1<<5
+#define MM_SEL          1<<6
+#define ADC_SEL_2       0<<7
+#define ADC_SEL_4       1<<7
+#define ADC_SEL_8       3<<7
+#define ADC_SEL_16      7<<7
+#define ADC_SEL_32      0x0f<<7
+#define ADC_SEL_64      0x1f<<7
+#define ADC_SEL_128     0x3f<<7
+#define ALTD_SEL        1<<13
diff --git a/arch/arm/mach-l7200/include/mach/system.h b/arch/arm/mach-l7200/include/mach/system.h
new file mode 100644
index 000000000000..5272abee0d0e
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/system.h
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-l7200/include/mach/system.h
+ *
+ * Copyright (c) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog
+ *  03-21-2000  SJH	Created
+ *  04-26-2000  SJH	Fixed functions
+ *  05-03-2000  SJH	Removed usage of obsolete 'iomd.h'
+ *  05-31-2000  SJH	Properly implemented 'arch_idle'
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	*(unsigned long *)(IO_BASE + 0x50004) = 1;	/* idle mode */
+}
+
+static inline void arch_reset(char mode)
+{
+	if (mode == 's') {
+		cpu_reset(0);
+	}
+}
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/time.h b/arch/arm/mach-l7200/include/mach/time.h
new file mode 100644
index 000000000000..061771c2c2bd
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/time.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-l7200/include/mach/time.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *   01-02-2000	RS	Created l7200 version, derived from rpc code
+ *   05-03-2000	SJH	Complete rewrite
+ */
+#ifndef _ASM_ARCH_TIME_H
+#define _ASM_ARCH_TIME_H
+
+#include <mach/irqs.h>
+
+/*
+ * RTC base register address
+ */
+#define RTC_BASE	(IO_BASE_2 + 0x2000)
+
+/*
+ * RTC registers
+ */
+#define RTC_RTCDR	(*(volatile unsigned char *) (RTC_BASE + 0x000))
+#define RTC_RTCMR	(*(volatile unsigned char *) (RTC_BASE + 0x004))
+#define RTC_RTCS	(*(volatile unsigned char *) (RTC_BASE + 0x008))
+#define RTC_RTCC	(*(volatile unsigned char *) (RTC_BASE + 0x008))
+#define RTC_RTCDV	(*(volatile unsigned char *) (RTC_BASE + 0x00c))
+#define RTC_RTCCR	(*(volatile unsigned char *) (RTC_BASE + 0x010))
+
+/*
+ * RTCCR register values
+ */
+#define RTC_RATE_32	0x00      /* 32 Hz tick */
+#define RTC_RATE_64	0x10      /* 64 Hz tick */
+#define RTC_RATE_128	0x20      /* 128 Hz tick */
+#define RTC_RATE_256	0x30      /* 256 Hz tick */
+#define RTC_EN_ALARM	0x01      /* Enable alarm */
+#define RTC_EN_TIC	0x04      /* Enable counter */
+#define RTC_EN_STWDOG	0x08      /* Enable watchdog */
+
+/*
+ * Handler for RTC timer interrupt
+ */
+static irqreturn_t
+timer_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	do_timer(1);
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+	do_profile(regs);
+	RTC_RTCC = 0;				/* Clear interrupt */
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set up RTC timer interrupt, and return the current time in seconds.
+ */
+void __init time_init(void)
+{
+	RTC_RTCC = 0;				/* Clear interrupt */
+
+	timer_irq.handler = timer_interrupt;
+
+	setup_irq(IRQ_RTC_TICK, &timer_irq);
+
+	RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC;	/* Set rate and enable timer */
+}
+
+#endif
diff --git a/arch/arm/mach-l7200/include/mach/timex.h b/arch/arm/mach-l7200/include/mach/timex.h
new file mode 100644
index 000000000000..ffc96a63b5a2
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-l7200/include/mach/timex.h
+ *
+ * Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
+ *                    Steve Hill (sjhill@cotw.com)
+ *
+ * 04-21-2000  RS Created file
+ * 05-03-2000 SJH Tick rate was wrong
+ *
+ */
+
+/*
+ * On the ARM720T, clock ticks are set to 128 Hz.
+ *
+ * NOTE: The actual RTC value is set in 'time.h' which
+ *       must be changed when choosing a different tick
+ *       rate. The value of HZ in 'param.h' must also
+ *       be changed to match below.
+ */
+#define CLOCK_TICK_RATE		128
diff --git a/arch/arm/mach-l7200/include/mach/uncompress.h b/arch/arm/mach-l7200/include/mach/uncompress.h
new file mode 100644
index 000000000000..591c962bb315
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/uncompress.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-l7200/include/mach/uncompress.h
+ *
+ * Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
+ *
+ * Changelog:
+ *  05-01-2000	SJH	Created
+ *  05-13-2000	SJH	Filled in function bodies
+ *  07-26-2000	SJH	Removed hard coded baud rate
+ */
+
+#include <mach/hardware.h>
+
+#define IO_UART  IO_START + 0x00044000
+
+#define __raw_writeb(v,p)	(*(volatile unsigned char *)(p) = (v))
+#define __raw_readb(p)		(*(volatile unsigned char *)(p))
+
+static inline void putc(int c)
+{
+	while(__raw_readb(IO_UART + 0x18) & 0x20 ||
+	      __raw_readb(IO_UART + 0x18) & 0x08)
+		barrier();
+
+	__raw_writeb(c, IO_UART + 0x00);
+}
+
+static inline void flush(void)
+{
+}
+
+static __inline__ void arch_decomp_setup(void)
+{
+	__raw_writeb(0x00, IO_UART + 0x08);	/* Set HSB */
+	__raw_writeb(0x00, IO_UART + 0x20);	/* Disable IRQs */
+	__raw_writeb(0x01, IO_UART + 0x14);	/* Enable UART */
+}
+
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-l7200/include/mach/vmalloc.h b/arch/arm/mach-l7200/include/mach/vmalloc.h
new file mode 100644
index 000000000000..85f0abbf15f1
--- /dev/null
+++ b/arch/arm/mach-l7200/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-l7200/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index 2ef7d0097b38..551b97261826 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -13,7 +13,7 @@
 #include <linux/device.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index fe64946f9e18..e373fb8e2699 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-lh7a40x/clcd.c b/arch/arm/mach-lh7a40x/clcd.c
index 1992db4c2523..a2a543258fc3 100644
--- a/arch/arm/mach-lh7a40x/clcd.c
+++ b/arch/arm/mach-lh7a40x/clcd.c
@@ -17,14 +17,13 @@
 
 //#include <linux/module.h>
 //#include <linux/time.h>
-//#include <asm/hardware.h>
 
 //#include <asm/mach/time.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
diff --git a/arch/arm/mach-lh7a40x/clocks.c b/arch/arm/mach-lh7a40x/clocks.c
index 7530a95c15a6..4fb23ac6b5ac 100644
--- a/arch/arm/mach-lh7a40x/clocks.c
+++ b/arch/arm/mach-lh7a40x/clocks.c
@@ -9,8 +9,8 @@
  */
 
 #include <linux/cpufreq.h>
-#include <asm/hardware.h>
-#include <asm/arch/clocks.h>
+#include <mach/hardware.h>
+#include <mach/clocks.h>
 #include <linux/err.h>
 
 struct module;
diff --git a/arch/arm/mach-lh7a40x/include/mach/clocks.h b/arch/arm/mach-lh7a40x/include/mach/clocks.h
new file mode 100644
index 000000000000..fe2e0255c084
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/clocks.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-lh7a40x/include/mach/clocks.h
+ *
+ *  Copyright (C) 2004 Marc Singer
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_CLOCKS_H
+#define __ASM_ARCH_CLOCKS_H
+
+unsigned int fclkfreq_get (void);
+unsigned int hclkfreq_get (void);
+unsigned int pclkfreq_get (void);
+
+#endif  /* _ASM_ARCH_CLOCKS_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/constants.h b/arch/arm/mach-lh7a40x/include/mach/constants.h
new file mode 100644
index 000000000000..55c6edbc2dfd
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/constants.h
@@ -0,0 +1,91 @@
+/* arch/arm/mach-lh7a40x/include/mach/constants.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *  Copyright (C) 2004 Logic Product Development
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_CONSTANTS_H
+#define __ASM_ARCH_CONSTANTS_H
+
+
+/* Addressing constants */
+
+	/* SoC CPU IO addressing */
+#define IO_PHYS			(0x80000000)
+#define IO_VIRT			(0xf8000000)
+#define IO_SIZE			(0x0000B000)
+
+#ifdef CONFIG_MACH_KEV7A400
+# define CPLD_PHYS		(0x20000000)
+# define CPLD_VIRT		(0xf2000000)
+# define CPLD_SIZE		PAGE_SIZE
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+
+# define IOBARRIER_PHYS		0x10000000 /* Second bank, fastest timing */
+# define IOBARRIER_VIRT		0xf0000000
+# define IOBARRIER_SIZE		PAGE_SIZE
+
+# define CF_PHYS		0x60200000
+# define CF_VIRT		0xf6020000
+# define CF_SIZE		(8*1024)
+
+	/* The IO mappings for the LPD CPLD are, unfortunately, sparse.  */
+# define CPLDX_PHYS(x)		(0x70000000 | ((x) << 20))
+# define CPLDX_VIRT(x)		(0xf7000000 | ((x) << 16))
+# define CPLD00_PHYS		CPLDX_PHYS (0x00) /* Wired LAN */
+# define CPLD00_VIRT		CPLDX_VIRT (0x00)
+# define CPLD00_SIZE		PAGE_SIZE
+# define CPLD02_PHYS		CPLDX_PHYS (0x02)
+# define CPLD02_VIRT		CPLDX_VIRT (0x02)
+# define CPLD02_SIZE		PAGE_SIZE
+# define CPLD06_PHYS		CPLDX_PHYS (0x06)
+# define CPLD06_VIRT		CPLDX_VIRT (0x06)
+# define CPLD06_SIZE		PAGE_SIZE
+# define CPLD08_PHYS		CPLDX_PHYS (0x08)
+# define CPLD08_VIRT		CPLDX_VIRT (0x08)
+# define CPLD08_SIZE		PAGE_SIZE
+# define CPLD0A_PHYS		CPLDX_PHYS (0x0a)
+# define CPLD0A_VIRT		CPLDX_VIRT (0x0a)
+# define CPLD0A_SIZE		PAGE_SIZE
+# define CPLD0C_PHYS		CPLDX_PHYS (0x0c)
+# define CPLD0C_VIRT		CPLDX_VIRT (0x0c)
+# define CPLD0C_SIZE		PAGE_SIZE
+# define CPLD0E_PHYS		CPLDX_PHYS (0x0e)
+# define CPLD0E_VIRT		CPLDX_VIRT (0x0e)
+# define CPLD0E_SIZE		PAGE_SIZE
+# define CPLD10_PHYS		CPLDX_PHYS (0x10)
+# define CPLD10_VIRT		CPLDX_VIRT (0x10)
+# define CPLD10_SIZE		PAGE_SIZE
+# define CPLD12_PHYS		CPLDX_PHYS (0x12)
+# define CPLD12_VIRT		CPLDX_VIRT (0x12)
+# define CPLD12_SIZE		PAGE_SIZE
+# define CPLD14_PHYS		CPLDX_PHYS (0x14)
+# define CPLD14_VIRT		CPLDX_VIRT (0x14)
+# define CPLD14_SIZE		PAGE_SIZE
+# define CPLD16_PHYS		CPLDX_PHYS (0x16)
+# define CPLD16_VIRT		CPLDX_VIRT (0x16)
+# define CPLD16_SIZE		PAGE_SIZE
+# define CPLD18_PHYS		CPLDX_PHYS (0x18)
+# define CPLD18_VIRT		CPLDX_VIRT (0x18)
+# define CPLD18_SIZE		PAGE_SIZE
+# define CPLD1A_PHYS		CPLDX_PHYS (0x1a)
+# define CPLD1A_VIRT		CPLDX_VIRT (0x1a)
+# define CPLD1A_SIZE		PAGE_SIZE
+#endif
+
+	/* Timing constants */
+
+#define	XTAL_IN			14745600	/* 14.7456 MHz crystal */
+#define PLL_CLOCK		(XTAL_IN * 21)	/* 309 MHz PLL clock */
+#define MAX_HCLK_KHZ		100000		/* HCLK max limit ~100MHz */
+#define HCLK			(99993600)
+//#define HCLK			(119808000)
+
+#endif /* __ASM_ARCH_CONSTANTS_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/debug-macro.S b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
new file mode 100644
index 000000000000..85141ed5383d
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/debug-macro.S
@@ -0,0 +1,39 @@
+/* arch/arm/mach-lh7a40x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+	@ It is not known if this will be appropriate for every 40x
+	@ board.
+
+		.macro  addruart,rx
+		mrc     p15, 0, \rx, c1, c0
+		tst     \rx, #1                 @ MMU enabled?
+		mov     \rx, #0x00000700        @ offset from base
+		orreq   \rx, \rx, #0x80000000   @ physical base
+		orrne   \rx, \rx, #0xf8000000   @ virtual base
+		.endm
+
+		.macro  senduart,rd,rx
+		strb    \rd, [\rx]              @ DATA
+		.endm
+
+		.macro  busyuart,rd,rx          @ spin while busy
+1001:		ldr     \rd, [\rx, #0x10]       @ STATUS
+		tst     \rd, #1 << 3            @ BUSY (TX FIFO not empty)
+		bne     1001b                   @ yes, spin
+		.endm
+
+		.macro  waituart,rd,rx          @ wait for Tx FIFO room
+1001:		ldrb    \rd, [\rx, #0x10]       @ STATUS
+		tst     \rd, #1 << 5            @ TXFF (TX FIFO full)
+		bne     1001b                   @ yes, spin
+		.endm
diff --git a/arch/arm/mach-lh7a40x/include/mach/dma.h b/arch/arm/mach-lh7a40x/include/mach/dma.h
new file mode 100644
index 000000000000..baa3f8dbd04b
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/dma.h
@@ -0,0 +1,86 @@
+/* arch/arm/mach-lh7a40x/include/mach/dma.h
+ *
+ *  Copyright (C) 2005 Marc Singer
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+typedef enum {
+	DMA_M2M0	= 0,
+	DMA_M2M1	= 1,
+	DMA_M2P0	= 2,	/* Tx */
+	DMA_M2P1	= 3,	/* Rx */
+	DMA_M2P2	= 4,	/* Tx */
+	DMA_M2P3	= 5,	/* Rx */
+	DMA_M2P4	= 6,	/* Tx - AC97 */
+	DMA_M2P5	= 7,	/* Rx - AC97 */
+	DMA_M2P6	= 8,	/* Tx */
+	DMA_M2P7	= 9,	/* Rx */
+} dma_device_t;
+
+#define DMA_LENGTH_MAX		((64*1024) - 4) /* bytes */
+
+#define DMAC_GCA		__REG(DMAC_PHYS + 0x2b80)
+#define DMAC_GIR		__REG(DMAC_PHYS + 0x2bc0)
+
+#define DMAC_GIR_MMI1		(1<<11)
+#define DMAC_GIR_MMI0		(1<<10)
+#define DMAC_GIR_MPI8		(1<<9)
+#define DMAC_GIR_MPI9		(1<<8)
+#define DMAC_GIR_MPI6		(1<<7)
+#define DMAC_GIR_MPI7		(1<<6)
+#define DMAC_GIR_MPI4		(1<<5)
+#define DMAC_GIR_MPI5		(1<<4)
+#define DMAC_GIR_MPI2		(1<<3)
+#define DMAC_GIR_MPI3		(1<<2)
+#define DMAC_GIR_MPI0		(1<<1)
+#define DMAC_GIR_MPI1		(1<<0)
+
+#define DMAC_M2P0		0x0000
+#define DMAC_M2P1		0x0040
+#define DMAC_M2P2		0x0080
+#define DMAC_M2P3		0x00c0
+#define DMAC_M2P4		0x0240
+#define DMAC_M2P5		0x0200
+#define DMAC_M2P6		0x02c0
+#define DMAC_M2P7		0x0280
+#define DMAC_M2P8		0x0340
+#define DMAC_M2P9		0x0300
+#define DMAC_M2M0		0x0100
+#define DMAC_M2M1		0x0140
+
+#define DMAC_P_PCONTROL(c)	__REG(DMAC_PHYS + (c) + 0x00)
+#define DMAC_P_PINTERRUPT(c)	__REG(DMAC_PHYS + (c) + 0x04)
+#define DMAC_P_PPALLOC(c)	__REG(DMAC_PHYS + (c) + 0x08)
+#define DMAC_P_PSTATUS(c)	__REG(DMAC_PHYS + (c) + 0x0c)
+#define DMAC_P_REMAIN(c)	__REG(DMAC_PHYS + (c) + 0x14)
+#define DMAC_P_MAXCNT0(c)	__REG(DMAC_PHYS + (c) + 0x20)
+#define DMAC_P_BASE0(c)		__REG(DMAC_PHYS + (c) + 0x24)
+#define DMAC_P_CURRENT0(c)	__REG(DMAC_PHYS + (c) + 0x28)
+#define DMAC_P_MAXCNT1(c)	__REG(DMAC_PHYS + (c) + 0x30)
+#define DMAC_P_BASE1(c)		__REG(DMAC_PHYS + (c) + 0x34)
+#define DMAC_P_CURRENT1(c)	__REG(DMAC_PHYS + (c) + 0x38)
+
+#define DMAC_PCONTROL_ENABLE	(1<<4)
+
+#define DMAC_PORT_USB		0
+#define DMAC_PORT_SDMMC		1
+#define DMAC_PORT_AC97_1	2
+#define DMAC_PORT_AC97_2	3
+#define DMAC_PORT_AC97_3	4
+#define DMAC_PORT_UART1		6
+#define DMAC_PORT_UART2		7
+#define DMAC_PORT_UART3		8
+
+#define DMAC_PSTATUS_CURRSTATE_SHIFT	4
+#define DMAC_PSTATUS_CURRSTATE_MASK	0x3
+
+#define DMAC_PSTATUS_NEXTBUF	 (1<<6)
+#define DMAC_PSTATUS_STALLRINT	 (1<<0)
+
+#define DMAC_INT_CHE		 (1<<3)
+#define DMAC_INT_NFB		 (1<<1)
+#define DMAC_INT_STALL		 (1<<0)
diff --git a/arch/arm/mach-lh7a40x/include/mach/entry-macro.S b/arch/arm/mach-lh7a40x/include/mach/entry-macro.S
new file mode 100644
index 000000000000..069bb4cefff7
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/entry-macro.S
@@ -0,0 +1,149 @@
+/*
+ * arch/arm/mach-lh7a40x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for LH7A40x platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+/* In order to allow there to be support for both of the processor
+   classes at the same time, we make a hack here that isn't very
+   pretty.  At startup, the link pointed to with the
+   branch_irq_lh7a400 symbol is replaced with a NOP when the CPU is
+   detected as a lh7a404.
+
+   *** FIXME: we should clean this up so that there is only one
+	      implementation for each CPU's design.
+
+*/
+
+#if defined (CONFIG_ARCH_LH7A400) && defined (CONFIG_ARCH_LH7A404)
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+branch_irq_lh7a400: b 1000f
+
+@ Implementation of the LH7A404 get_irqnr_and_base.
+
+		mov	\irqnr, #0			@ VIC1 irq base
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		add	\base, \base, #0x8000
+		ldr	\tmp, [\base, #0x0030]		@ VIC1_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		tst	\tmp, #VA_VIC1DEFAULT		@ Default vectored VIC1
+		ldrne	\irqstat, [\base, #0]		@ VIC1_IRQSTATUS
+		bne	1001f
+		add	\base, \base, #(0xa000 - 0x8000)
+		ldr	\tmp, [\base, #0x0030]		@ VIC2_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		ldr	\irqstat, [\base, #0]		@ VIC2_IRQSTATUS
+		mov	\irqnr, #32			@ VIC2 irq base
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1002:		and	\irqnr, \tmp, #0x3f		@ Mask for valid bits
+1008:		movs	\irqstat, #1			@ Force !Z
+		str	\tmp, [\base, #0x0030]		@ Clear vector
+		b	1009f
+
+@ Implementation of the LH7A400 get_irqnr_and_base.
+
+1000:		mov	\irqnr, #0
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		ldr	\irqstat, [\base, #0x500]	@ PIC INTSR
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1008:		movs	\irqstat, #1			@ Force !Z
+
+1009:
+               .endm
+
+
+
+#elif defined (CONFIG_ARCH_LH7A400)
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	\irqnr, #0
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		ldr	\irqstat, [\base, #0x500]	@ PIC INTSR
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1008:		movs	\irqstat, #1			@ Force !Z
+1009:
+               .endm
+
+#elif defined(CONFIG_ARCH_LH7A404)
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	\irqnr, #0			@ VIC1 irq base
+		mov	\base, #io_p2v(0x80000000)	@ APB registers
+		add	\base, \base, #0x8000
+		ldr	\tmp, [\base, #0x0030]		@ VIC1_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		tst	\tmp, #VA_VIC1DEFAULT		@ Default vectored VIC1
+		ldrne	\irqstat, [\base, #0]		@ VIC1_IRQSTATUS
+		bne	1001f
+		add	\base, \base, #(0xa000 - 0x8000)
+		ldr	\tmp, [\base, #0x0030]		@ VIC2_VECTADDR
+		tst	\tmp, #VA_VECTORED		@ Direct vectored
+		bne	1002f
+		ldr	\irqstat, [\base, #0]		@ VIC2_IRQSTATUS
+		mov	\irqnr, #32			@ VIC2 irq base
+
+1001:		movs	\irqstat, \irqstat, lsr #1	@ Shift into carry
+		bcs	1008f				@ Bit set; irq found
+		add	\irqnr, \irqnr, #1
+		bne	1001b				@ Until no bits
+		b	1009f				@ Nothing?  Hmm.
+1002:		and	\irqnr, \tmp, #0x3f		@ Mask for valid bits
+1008:		movs	\irqstat, #1			@ Force !Z
+		str	\tmp, [\base, #0x0030]		@ Clear vector
+1009:
+               .endm
+#endif
+
+
diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h
new file mode 100644
index 000000000000..48e827d2fa56
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/hardware.h
@@ -0,0 +1,62 @@
+/* arch/arm/mach-lh7a40x/include/mach/hardware.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  [ Substantially cribbed from arch/arm/mach-pxa/include/mach/hardware.h ]
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>		/* Added for the sake of amba-clcd driver */
+
+#define io_p2v(x) (0xf0000000 | (((x) & 0xfff00000) >> 4) | ((x) & 0x0000ffff))
+#define io_v2p(x) (             (((x) & 0x0fff0000) << 4) | ((x) & 0x0000ffff))
+
+#ifdef __ASSEMBLY__
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#else
+
+# if 0
+#  define __REG(x)	(*((volatile u32 *)io_p2v(x)))
+# else
+/*
+ * This __REG() version gives the same results as the one above,  except
+ * that we are fooling gcc somehow so it generates far better and smaller
+ * assembly code for access to contigous registers.  It's a shame that gcc
+ * doesn't guess this by itself.
+ */
+#include <asm/types.h>
+typedef struct { volatile u32 offset[4096]; } __regbase;
+# define __REGP(x)	((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
+# define __REG(x)	__REGP(io_p2v(x))
+typedef struct { volatile u16 offset[4096]; } __regbase16;
+# define __REGP16(x)	((__regbase16 *)((x)&~4095))->offset[((x)&4095)>>1]
+# define __REG16(x)	__REGP16(io_p2v(x))
+typedef struct { volatile u8 offset[4096]; } __regbase8;
+# define __REGP8(x)	((__regbase8 *)((x)&~4095))->offset[(x)&4095]
+# define __REG8(x)	__REGP8(io_p2v(x))
+#endif
+
+/* Let's kick gcc's ass again... */
+# define __REG2(x,y)	\
+	( __builtin_constant_p(y) ? (__REG((x) + (y))) \
+				  : (*(volatile u32 *)((u32)&__REG(x) + (y))) )
+
+# define __PREG(x)	(io_v2p((u32)&(x)))
+
+#endif
+
+#define MASK_AND_SET(v,m,s)	(v) = ((v)&~(m))|(s)
+
+#include "registers.h"
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/io.h b/arch/arm/mach-lh7a40x/include/mach/io.h
new file mode 100644
index 000000000000..031d26f9163c
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/io.h
@@ -0,0 +1,22 @@
+/* arch/arm/mach-lh7a40x/include/mach/io.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/* No ISA or PCI bus on this machine. */
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/irqs.h b/arch/arm/mach-lh7a40x/include/mach/irqs.h
new file mode 100644
index 000000000000..0f9b83675935
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/irqs.h
@@ -0,0 +1,200 @@
+/* arch/arm/mach-lh7a40x/include/mach/irqs.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *  Copyright (C) 2004 Logic Product Development
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+/* It is to be seen whether or not we can build a kernel for more than
+ * one board.  For the time being, these macros assume that we cannot.
+ * Thus, it is OK to ifdef machine/board specific IRQ assignments.
+ */
+
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+
+#define FIQ_START	80
+
+#if defined (CONFIG_ARCH_LH7A400)
+
+  /* FIQs */
+
+# define IRQ_GPIO0FIQ	0	/* GPIO External FIQ Interrupt on F0 */
+# define IRQ_BLINT	1	/* Battery Low */
+# define IRQ_WEINT	2	/* Watchdog Timer, WDT overflow	*/
+# define IRQ_MCINT	3	/* Media Change, MEDCHG pin rising */
+
+  /* IRQs */
+
+# define IRQ_CSINT	4	/* Audio Codec (ACI) */
+# define IRQ_GPIO1INTR	5	/* GPIO External IRQ Interrupt on F1 */
+# define IRQ_GPIO2INTR	6	/* GPIO External IRQ Interrupt on F2 */
+# define IRQ_GPIO3INTR	7	/* GPIO External IRQ Interrupt on F3 */
+# define IRQ_T1UI	8	/* Timer 1 underflow */
+# define IRQ_T2UI	9	/* Timer 2 underflow */
+# define IRQ_RTCMI	10
+# define IRQ_TINTR	11	/* Clock State Controller 64 Hz tick (CSC) */
+# define IRQ_UART1INTR	12
+# define IRQ_UART2INTR	13
+# define IRQ_LCDINTR	14
+# define IRQ_SSIEOT	15	/* Synchronous Serial Interface (SSI) */
+# define IRQ_UART3INTR	16
+# define IRQ_SCIINTR	17	/* Smart Card Interface (SCI) */
+# define IRQ_AACINTR	18	/* Advanced Audio Codec (AAC) */
+# define IRQ_MMCINTR	19	/* Multimedia Card (MMC) */
+# define IRQ_USBINTR	20
+# define IRQ_DMAINTR	21
+# define IRQ_T3UI	22	/* Timer 3 underflow */
+# define IRQ_GPIO4INTR	23	/* GPIO External IRQ Interrupt on F4 */
+# define IRQ_GPIO5INTR	24	/* GPIO External IRQ Interrupt on F5 */
+# define IRQ_GPIO6INTR	25	/* GPIO External IRQ Interrupt on F6 */
+# define IRQ_GPIO7INTR	26	/* GPIO External IRQ Interrupt on F7 */
+# define IRQ_BMIINTR	27	/* Battery Monitor Interface (BMI) */
+
+# define NR_IRQ_CPU	28	/* IRQs directly recognized by CPU */
+
+	/* Given IRQ, return GPIO interrupt number 0-7 */
+# define IRQ_TO_GPIO(i)  ((i) \
+	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
+	- (((i) > IRQ_GPIO0INTR) ? IRQ_GPIO1INTR - IRQ_GPIO0INTR - 1 : 0))
+
+#endif
+
+#if defined (CONFIG_ARCH_LH7A404)
+
+# define IRQ_BROWN	0	/* Brownout */
+# define IRQ_WDTINTR	1	/* Watchdog Timer */
+# define IRQ_COMMRX	2	/* ARM Comm Rx for Debug */
+# define IRQ_COMMTX	3	/* ARM Comm Tx for Debug */
+# define IRQ_T1UI	4	/* Timer 1 underflow */
+# define IRQ_T2UI	5	/* Timer 2 underflow */
+# define IRQ_CSINT	6	/* Codec Interrupt (shared by AAC on 404) */
+# define IRQ_DMAM2P0	7	/* -- DMA Memory to Peripheral */
+# define IRQ_DMAM2P1	8
+# define IRQ_DMAM2P2	9
+# define IRQ_DMAM2P3	10
+# define IRQ_DMAM2P4	11
+# define IRQ_DMAM2P5	12
+# define IRQ_DMAM2P6	13
+# define IRQ_DMAM2P7	14
+# define IRQ_DMAM2P8	15
+# define IRQ_DMAM2P9	16
+# define IRQ_DMAM2M0	17	/* -- DMA Memory to Memory */
+# define IRQ_DMAM2M1	18
+# define IRQ_GPIO0INTR	19	/* -- GPIOF Interrupt */
+# define IRQ_GPIO1INTR	20
+# define IRQ_GPIO2INTR	21
+# define IRQ_GPIO3INTR	22
+# define IRQ_SOFT_V1_23	23	/* -- Unassigned */
+# define IRQ_SOFT_V1_24	24
+# define IRQ_SOFT_V1_25	25
+# define IRQ_SOFT_V1_26	26
+# define IRQ_SOFT_V1_27	27
+# define IRQ_SOFT_V1_28	28
+# define IRQ_SOFT_V1_29	29
+# define IRQ_SOFT_V1_30	30
+# define IRQ_SOFT_V1_31	31
+
+# define IRQ_BLINT	32	/* Battery Low */
+# define IRQ_BMIINTR	33	/* Battery Monitor */
+# define IRQ_MCINTR	34	/* Media Change */
+# define IRQ_TINTR	35	/* 64Hz Tick */
+# define IRQ_WEINT	36	/* Watchdog Expired */
+# define IRQ_RTCMI	37	/* Real-time Clock Match */
+# define IRQ_UART1INTR	38	/* UART1 Interrupt (including error) */
+# define IRQ_UART1ERR	39	/* UART1 Error */
+# define IRQ_UART2INTR	40	/* UART2 Interrupt (including error) */
+# define IRQ_UART2ERR	41	/* UART2 Error */
+# define IRQ_UART3INTR	42	/* UART3 Interrupt (including error) */
+# define IRQ_UART3ERR	43	/* UART3 Error */
+# define IRQ_SCIINTR	44	/* Smart Card */
+# define IRQ_TSCINTR	45	/* Touchscreen */
+# define IRQ_KMIINTR	46	/* Keyboard/Mouse (PS/2) */
+# define IRQ_GPIO4INTR	47	/* -- GPIOF Interrupt */
+# define IRQ_GPIO5INTR	48
+# define IRQ_GPIO6INTR	49
+# define IRQ_GPIO7INTR	50
+# define IRQ_T3UI	51	/* Timer 3 underflow */
+# define IRQ_LCDINTR	52	/* LCD Controller */
+# define IRQ_SSPINTR	53	/* Synchronous Serial Port */
+# define IRQ_SDINTR	54	/* Secure Digital Port (MMC) */
+# define IRQ_USBINTR	55	/* USB Device Port */
+# define IRQ_USHINTR	56	/* USB Host Port */
+# define IRQ_SOFT_V2_25	57	/* -- Unassigned */
+# define IRQ_SOFT_V2_26	58
+# define IRQ_SOFT_V2_27	59
+# define IRQ_SOFT_V2_28	60
+# define IRQ_SOFT_V2_29	61
+# define IRQ_SOFT_V2_30	62
+# define IRQ_SOFT_V2_31	63
+
+# define NR_IRQ_CPU	64	/* IRQs directly recognized by CPU */
+
+	/* Given IRQ, return GPIO interrupt number 0-7 */
+# define IRQ_TO_GPIO(i)  ((i) \
+	- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
+	- IRQ_GPIO0INTR)
+
+			/* Vector Address constants */
+# define VA_VECTORED	0x100	/* Set for vectored interrupt */
+# define VA_VIC1DEFAULT	0x200	/* Set as default VECTADDR for VIC1 */
+# define VA_VIC2DEFAULT	0x400	/* Set as default VECTADDR for VIC2 */
+
+#endif
+
+  /* IRQ aliases */
+
+#if !defined (IRQ_GPIO0INTR)
+# define IRQ_GPIO0INTR	IRQ_GPIO0FIQ
+#endif
+#define IRQ_TICK	IRQ_TINTR
+#define IRQ_PCC1_RDY	IRQ_GPIO6INTR	/* PCCard 1 ready */
+#define IRQ_PCC2_RDY	IRQ_GPIO7INTR	/* PCCard 2 ready */
+#define IRQ_USB		IRQ_USBINTR	/* USB device */
+
+#ifdef CONFIG_MACH_KEV7A400
+# define IRQ_TS		IRQ_GPIOFIQ	/* Touchscreen */
+# define IRQ_CPLD	IRQ_GPIO1INTR	/* CPLD cascade */
+# define IRQ_PCC1_CD	IRQ_GPIO_F2	/* PCCard 1 card detect */
+# define IRQ_PCC2_CD	IRQ_GPIO_F3	/* PCCard 2 card detect */
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+# define IRQ_CPLD_V28	IRQ_GPIO7INTR	/* CPLD cascade through GPIO_PF7 */
+# define IRQ_CPLD_V34	IRQ_GPIO3INTR	/* CPLD cascade through GPIO_PF3 */
+#endif
+
+  /* System specific IRQs */
+
+#define IRQ_BOARD_START NR_IRQ_CPU
+
+#ifdef CONFIG_MACH_KEV7A400
+# define IRQ_KEV7A400_CPLD	IRQ_BOARD_START
+# define NR_IRQ_BOARD		5
+# define IRQ_KEV7A400_MMC_CD	IRQ_KEV7A400_CPLD + 0	/* MMC Card Detect */
+# define IRQ_KEV7A400_RI2	IRQ_KEV7A400_CPLD + 1	/* Ring Indicator 2 */
+# define IRQ_KEV7A400_IDE_CF	IRQ_KEV7A400_CPLD + 2	/* Compact Flash (?) */
+# define IRQ_KEV7A400_ETH_INT	IRQ_KEV7A400_CPLD + 3	/* Ethernet chip */
+# define IRQ_KEV7A400_INT	IRQ_KEV7A400_CPLD + 4
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+# define IRQ_LPD7A40X_CPLD	IRQ_BOARD_START
+# define NR_IRQ_BOARD		2
+# define IRQ_LPD7A40X_ETH_INT	IRQ_LPD7A40X_CPLD + 0	/* Ethernet chip */
+# define IRQ_LPD7A400_TS	IRQ_LPD7A40X_CPLD + 1	/* Touch screen */
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400)
+# define IRQ_TOUCH		IRQ_LPD7A400_TS
+#endif
+
+#define NR_IRQS		(NR_IRQ_CPU + NR_IRQ_BOARD)
+
+#endif
diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h
new file mode 100644
index 000000000000..f7107b4c197a
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/memory.h
@@ -0,0 +1,76 @@
+/* arch/arm/mach-lh7a40x/include/mach/memory.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ *
+ *  Refer to <file:Documentation/arm/Sharp-LH/SDRAM> for more information.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0xc0000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+#ifdef CONFIG_DISCONTIGMEM
+
+/*
+ * Given a kernel address, find the home node of the underlying memory.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+#  define KVADDR_TO_NID(addr) \
+  (  ((((unsigned long) (addr) - PAGE_OFFSET) >> 24) &  1)\
+   | ((((unsigned long) (addr) - PAGE_OFFSET) >> 25) & ~1))
+# else  /* 2 banks per node */
+#  define KVADDR_TO_NID(addr) \
+      (((unsigned long) (addr) - PAGE_OFFSET) >> 26)
+# endif
+
+/*
+ * Given a page frame number, convert it to a node id.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+#  define PFN_TO_NID(pfn) \
+  (((((pfn) - PHYS_PFN_OFFSET) >> (24 - PAGE_SHIFT)) &  1)\
+ | ((((pfn) - PHYS_PFN_OFFSET) >> (25 - PAGE_SHIFT)) & ~1))
+# else  /* 2 banks per node */
+#  define PFN_TO_NID(pfn) \
+    (((pfn) - PHYS_PFN_OFFSET) >> (26 - PAGE_SHIFT))
+#endif
+
+/*
+ * Given a kaddr, LOCAL_MEM_MAP finds the owning node of the memory
+ * and returns the index corresponding to the appropriate page in the
+ * node's mem_map.
+ */
+
+# ifdef CONFIG_LH7A40X_ONE_BANK_PER_NODE
+#  define LOCAL_MAP_NR(addr) \
+       (((unsigned long)(addr) & 0x003fffff) >> PAGE_SHIFT)
+# else  /* 2 banks per node */
+#  define LOCAL_MAP_NR(addr) \
+       (((unsigned long)(addr) & 0x01ffffff) >> PAGE_SHIFT)
+# endif
+
+#endif
+
+#endif
diff --git a/arch/arm/mach-lh7a40x/include/mach/registers.h b/arch/arm/mach-lh7a40x/include/mach/registers.h
new file mode 100644
index 000000000000..ea44396383a7
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/registers.h
@@ -0,0 +1,224 @@
+/* arch/arm/mach-lh7a40x/include/mach/registers.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *  Copyright (C) 2004 Logic Product Development
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/constants.h>
+
+#ifndef __ASM_ARCH_REGISTERS_H
+#define __ASM_ARCH_REGISTERS_H
+
+
+	/* Physical register base addresses */
+
+#define AC97C_PHYS	(0x80000000)	/* AC97 Controller */
+#define MMC_PHYS	(0x80000100)	/* Multimedia Card Controller */
+#define USB_PHYS	(0x80000200)	/* USB Client */
+#define SCI_PHYS	(0x80000300)	/* Secure Card Interface */
+#define CSC_PHYS	(0x80000400)	/* Clock/State Controller  */
+#define INTC_PHYS	(0x80000500)	/* Interrupt Controller */
+#define UART1_PHYS	(0x80000600)	/* UART1 Controller */
+#define SIR_PHYS	(0x80000600)	/* IR Controller, same are UART1 */
+#define UART2_PHYS	(0x80000700)	/* UART2 Controller */
+#define UART3_PHYS	(0x80000800)	/* UART3 Controller */
+#define DCDC_PHYS	(0x80000900)	/* DC to DC Controller */
+#define ACI_PHYS	(0x80000a00)	/* Audio Codec Interface */
+#define SSP_PHYS	(0x80000b00)	/* Synchronous ... */
+#define TIMER_PHYS	(0x80000c00)	/* Timer Controller */
+#define RTC_PHYS	(0x80000d00)	/* Real-time Clock */
+#define GPIO_PHYS	(0x80000e00)	/* General Purpose IO */
+#define BMI_PHYS	(0x80000f00)	/* Battery Monitor Interface */
+#define HRTFTC_PHYS	(0x80001000)	/* High-res TFT Controller (LH7A400) */
+#define ALI_PHYS	(0x80001000)	/* Advanced LCD Interface (LH7A404) */
+#define WDT_PHYS	(0x80001400)	/* Watchdog Timer */
+#define SMC_PHYS	(0x80002000)	/* Static Memory Controller */
+#define SDRC_PHYS	(0x80002400)	/* SDRAM Controller */
+#define DMAC_PHYS	(0x80002800)	/* DMA Controller */
+#define CLCDC_PHYS	(0x80003000)	/* Color LCD Controller */
+
+	/* Physical registers of the LH7A404 */
+
+#define ADC_PHYS	(0x80001300)	/* A/D & Touchscreen Controller */
+#define VIC1_PHYS	(0x80008000)	/* Vectored Interrupt Controller 1 */
+#define USBH_PHYS	(0x80009000)	/* USB OHCI host controller */
+#define VIC2_PHYS	(0x8000a000)	/* Vectored Interrupt Controller 2 */
+
+/*#define KBD_PHYS	(0x80000e00) */
+/*#define LCDICP_PHYS	(0x80001000) */
+
+
+	/* Clock/State Controller register */
+
+#define CSC_PWRSR	__REG(CSC_PHYS + 0x00) /* Reset register & ID */
+#define CSC_PWRCNT	__REG(CSC_PHYS + 0x04) /* Power control */
+#define CSC_CLKSET	__REG(CSC_PHYS + 0x20) /* Clock speed control */
+#define CSC_USBDRESET	__REG(CSC_PHYS + 0x4c) /* USB Device resets */
+
+#define CSC_PWRCNT_USBH_EN	(1<<28)	/* USB Host power enable */
+#define CSC_PWRCNT_DMAC_M2M1_EN	(1<<27)
+#define CSC_PWRCNT_DMAC_M2M0_EN	(1<<26)
+#define CSC_PWRCNT_DMAC_M2P8_EN	(1<<25)
+#define CSC_PWRCNT_DMAC_M2P9_EN	(1<<24)
+#define CSC_PWRCNT_DMAC_M2P6_EN	(1<<23)
+#define CSC_PWRCNT_DMAC_M2P7_EN	(1<<22)
+#define CSC_PWRCNT_DMAC_M2P4_EN	(1<<21)
+#define CSC_PWRCNT_DMAC_M2P5_EN	(1<<20)
+#define CSC_PWRCNT_DMAC_M2P2_EN	(1<<19)
+#define CSC_PWRCNT_DMAC_M2P3_EN	(1<<18)
+#define CSC_PWRCNT_DMAC_M2P0_EN	(1<<17)
+#define CSC_PWRCNT_DMAC_M2P1_EN	(1<<16)
+
+#define CSC_PWRSR_CHIPMAN_SHIFT	(24)
+#define CSC_PWRSR_CHIPMAN_MASK	(0xff)
+#define CSC_PWRSR_CHIPID_SHIFT	(16)
+#define CSC_PWRSR_CHIPID_MASK	(0xff)
+
+#define CSC_USBDRESET_APBRESETREG	(1<<1)
+#define CSC_USBDRESET_IORESETREG	(1<<0)
+
+	/* Interrupt Controller registers */
+
+#define INTC_INTSR	__REG(INTC_PHYS + 0x00)	/* Status */
+#define INTC_INTRSR	__REG(INTC_PHYS + 0x04)	/* Raw Status */
+#define INTC_INTENS	__REG(INTC_PHYS + 0x08)	/* Enable Set */
+#define INTC_INTENC	__REG(INTC_PHYS + 0x0c)	/* Enable Clear */
+
+
+	/* Vectored Interrupted Controller registers */
+
+#define VIC1_IRQSTATUS	__REG(VIC1_PHYS + 0x00)
+#define VIC1_FIQSTATUS	__REG(VIC1_PHYS + 0x04)
+#define VIC1_RAWINTR	__REG(VIC1_PHYS + 0x08)
+#define VIC1_INTSEL	__REG(VIC1_PHYS + 0x0c)
+#define VIC1_INTEN	__REG(VIC1_PHYS + 0x10)
+#define VIC1_INTENCLR	__REG(VIC1_PHYS + 0x14)
+#define VIC1_SOFTINT	__REG(VIC1_PHYS + 0x18)
+#define VIC1_SOFTINTCLR	__REG(VIC1_PHYS + 0x1c)
+#define VIC1_PROTECT	__REG(VIC1_PHYS + 0x20)
+#define VIC1_VECTADDR	__REG(VIC1_PHYS + 0x30)
+#define VIC1_NVADDR	__REG(VIC1_PHYS + 0x34)
+#define VIC1_VAD0	__REG(VIC1_PHYS + 0x100)
+#define VIC1_VECTCNTL0	__REG(VIC1_PHYS + 0x200)
+#define VIC2_IRQSTATUS	__REG(VIC2_PHYS + 0x00)
+#define VIC2_FIQSTATUS	__REG(VIC2_PHYS + 0x04)
+#define VIC2_RAWINTR	__REG(VIC2_PHYS + 0x08)
+#define VIC2_INTSEL	__REG(VIC2_PHYS + 0x0c)
+#define VIC2_INTEN	__REG(VIC2_PHYS + 0x10)
+#define VIC2_INTENCLR	__REG(VIC2_PHYS + 0x14)
+#define VIC2_SOFTINT	__REG(VIC2_PHYS + 0x18)
+#define VIC2_SOFTINTCLR	__REG(VIC2_PHYS + 0x1c)
+#define VIC2_PROTECT	__REG(VIC2_PHYS + 0x20)
+#define VIC2_VECTADDR	__REG(VIC2_PHYS + 0x30)
+#define VIC2_NVADDR	__REG(VIC2_PHYS + 0x34)
+#define VIC2_VAD0	__REG(VIC2_PHYS + 0x100)
+#define VIC2_VECTCNTL0	__REG(VIC2_PHYS + 0x200)
+
+#define VIC_CNTL_ENABLE	(0x20)
+
+	/* USB Host registers (Open HCI compatible) */
+
+#define USBH_CMDSTATUS	__REG(USBH_PHYS + 0x08)
+
+
+	/* GPIO registers */
+
+#define GPIO_INTTYPE1	__REG(GPIO_PHYS + 0x4c)	/* Interrupt Type 1 (Edge) */
+#define GPIO_INTTYPE2	__REG(GPIO_PHYS + 0x50)	/* Interrupt Type 2 */
+#define GPIO_GPIOFEOI	__REG(GPIO_PHYS + 0x54)	/* GPIO End-of-Interrupt */
+#define GPIO_GPIOINTEN	__REG(GPIO_PHYS + 0x58)	/* GPIO Interrupt Enable */
+#define GPIO_INTSTATUS	__REG(GPIO_PHYS + 0x5c)	/* GPIO Interrupt Status */
+#define GPIO_PINMUX	__REG(GPIO_PHYS + 0x2c)
+#define GPIO_PADD	__REG(GPIO_PHYS + 0x10)
+#define GPIO_PAD	__REG(GPIO_PHYS + 0x00)
+#define GPIO_PCD	__REG(GPIO_PHYS + 0x08)
+#define GPIO_PCDD	__REG(GPIO_PHYS + 0x18)
+#define GPIO_PEDD	__REG(GPIO_PHYS + 0x24)
+#define GPIO_PED	__REG(GPIO_PHYS + 0x20)
+
+
+	/* Static Memory Controller registers */
+
+#define SMC_BCR0	__REG(SMC_PHYS + 0x00)	/* Bank 0 Configuration */
+#define SMC_BCR1	__REG(SMC_PHYS + 0x04)	/* Bank 1 Configuration */
+#define SMC_BCR2	__REG(SMC_PHYS + 0x08)	/* Bank 2 Configuration */
+#define SMC_BCR3	__REG(SMC_PHYS + 0x0C)	/* Bank 3 Configuration */
+#define SMC_BCR6	__REG(SMC_PHYS + 0x18)	/* Bank 6 Configuration */
+#define SMC_BCR7	__REG(SMC_PHYS + 0x1c)	/* Bank 7 Configuration */
+
+
+#ifdef CONFIG_MACH_KEV7A400
+# define CPLD_RD_OPT_DIP_SW	__REG16(CPLD_PHYS + 0x00) /* Read Option SW */
+# define CPLD_WR_IO_BRD_CTL	__REG16(CPLD_PHYS + 0x00) /* Write Control */
+# define CPLD_RD_PB_KEYS	__REG16(CPLD_PHYS + 0x02) /* Read Btn Keys */
+# define CPLD_LATCHED_INTS	__REG16(CPLD_PHYS + 0x04) /* Read INTR stat. */
+# define CPLD_CL_INT		__REG16(CPLD_PHYS + 0x04) /* Clear INTR stat */
+# define CPLD_BOOT_MMC_STATUS	__REG16(CPLD_PHYS + 0x06) /* R/O */
+# define CPLD_RD_KPD_ROW_SENSE	__REG16(CPLD_PHYS + 0x08)
+# define CPLD_WR_PB_INT_MASK	__REG16(CPLD_PHYS + 0x08)
+# define CPLD_RD_BRD_DISP_SW	__REG16(CPLD_PHYS + 0x0a)
+# define CPLD_WR_EXT_INT_MASK	__REG16(CPLD_PHYS + 0x0a)
+# define CPLD_LCD_PWR_CNTL	__REG16(CPLD_PHYS + 0x0c)
+# define CPLD_SEVEN_SEG		__REG16(CPLD_PHYS + 0x0e) /* 7 seg. LED mask */
+
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+
+# define CPLD_CONTROL		__REG16(CPLD02_PHYS)
+# define CPLD_SPI_DATA		__REG16(CPLD06_PHYS)
+# define CPLD_SPI_CONTROL	__REG16(CPLD08_PHYS)
+# define CPLD_SPI_EEPROM	__REG16(CPLD0A_PHYS)
+# define CPLD_INTERRUPTS	__REG16(CPLD0C_PHYS) /* IRQ mask/status */
+# define CPLD_BOOT_MODE		__REG16(CPLD0E_PHYS)
+# define CPLD_FLASH		__REG16(CPLD10_PHYS)
+# define CPLD_POWER_MGMT	__REG16(CPLD12_PHYS)
+# define CPLD_REVISION		__REG16(CPLD14_PHYS)
+# define CPLD_GPIO_EXT		__REG16(CPLD16_PHYS)
+# define CPLD_GPIO_DATA		__REG16(CPLD18_PHYS)
+# define CPLD_GPIO_DIR		__REG16(CPLD1A_PHYS)
+
+#endif
+
+	/* Timer registers */
+
+#define TIMER_LOAD1	__REG(TIMER_PHYS + 0x00) /* Timer 1 initial value */
+#define TIMER_VALUE1	__REG(TIMER_PHYS + 0x04) /* Timer 1 current value */
+#define TIMER_CONTROL1	__REG(TIMER_PHYS + 0x08) /* Timer 1 control word */
+#define TIMER_EOI1	__REG(TIMER_PHYS + 0x0c) /* Timer 1 interrupt clear */
+
+#define TIMER_LOAD2	__REG(TIMER_PHYS + 0x20) /* Timer 2 initial value */
+#define TIMER_VALUE2	__REG(TIMER_PHYS + 0x24) /* Timer 2 current value */
+#define TIMER_CONTROL2	__REG(TIMER_PHYS + 0x28) /* Timer 2 control word */
+#define TIMER_EOI2	__REG(TIMER_PHYS + 0x2c) /* Timer 2 interrupt clear */
+
+#define TIMER_BUZZCON	__REG(TIMER_PHYS + 0x40) /* Buzzer configuration */
+
+#define TIMER_LOAD3	__REG(TIMER_PHYS + 0x80) /* Timer 3 initial value */
+#define TIMER_VALUE3	__REG(TIMER_PHYS + 0x84) /* Timer 3 current value */
+#define TIMER_CONTROL3	__REG(TIMER_PHYS + 0x88) /* Timer 3 control word */
+#define TIMER_EOI3	__REG(TIMER_PHYS + 0x8c) /* Timer 3 interrupt clear */
+
+#define TIMER_C_ENABLE		(1<<7)
+#define TIMER_C_PERIODIC	(1<<6)
+#define TIMER_C_FREERUNNING	(0)
+#define TIMER_C_2KHZ		(0x00)		/* 1.986 kHz */
+#define TIMER_C_508KHZ		(0x08)
+
+	/* GPIO registers */
+
+#define GPIO_PFDD		__REG(GPIO_PHYS + 0x34)	/* PF direction */
+#define GPIO_INTTYPE1		__REG(GPIO_PHYS + 0x4c)	/* IRQ edge or lvl  */
+#define GPIO_INTTYPE2		__REG(GPIO_PHYS + 0x50)	/* IRQ activ hi/lo */
+#define GPIO_GPIOFEOI		__REG(GPIO_PHYS + 0x54)	/* GPIOF end of IRQ */
+#define GPIO_GPIOFINTEN		__REG(GPIO_PHYS + 0x58)	/* GPIOF IRQ enable */
+#define GPIO_INTSTATUS		__REG(GPIO_PHYS + 0x5c)	/* GPIOF IRQ latch */
+#define GPIO_RAWINTSTATUS	__REG(GPIO_PHYS + 0x60)	/* GPIOF IRQ raw */
+
+
+#endif  /* _ASM_ARCH_REGISTERS_H */
diff --git a/arch/arm/mach-lh7a40x/include/mach/ssp.h b/arch/arm/mach-lh7a40x/include/mach/ssp.h
new file mode 100644
index 000000000000..132b1c4d5ce6
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/ssp.h
@@ -0,0 +1,71 @@
+/* ssp.h
+     $Id$
+
+   written by Marc Singer
+   6 Dec 2004
+
+   Copyright (C) 2004 Marc Singer
+
+   -----------
+   DESCRIPTION
+   -----------
+
+   This SSP header is available throughout the kernel, for this
+   machine/architecture, because drivers that use it may be dispersed.
+
+   This file was cloned from the 7952x implementation.  It would be
+   better to share them, but we're taking an easier approach for the
+   time being.
+
+*/
+
+#if !defined (__SSP_H__)
+#    define   __SSP_H__
+
+/* ----- Includes */
+
+/* ----- Types */
+
+struct ssp_driver {
+	int  (*init)		(void);
+	void (*exit)		(void);
+	void (*acquire)		(void);
+	void (*release)		(void);
+	int  (*configure)	(int device, int mode, int speed,
+				 int frame_size_write, int frame_size_read);
+	void (*chip_select)	(int enable);
+	void (*set_callbacks)   (void* handle,
+				 irqreturn_t (*callback_tx)(void*),
+				 irqreturn_t (*callback_rx)(void*));
+	void (*enable)		(void);
+	void (*disable)		(void);
+//	int  (*save_state)	(void*);
+//	void (*restore_state)	(void*);
+	int  (*read)		(void);
+	int  (*write)		(u16 data);
+	int  (*write_read)	(u16 data);
+	void (*flush)		(void);
+	void (*write_async)	(void* pv, size_t cb);
+	size_t (*write_pos)	(void);
+};
+
+	/* These modes are only available on the LH79524 */
+#define SSP_MODE_SPI		(1)
+#define SSP_MODE_SSI		(2)
+#define SSP_MODE_MICROWIRE	(3)
+#define SSP_MODE_I2S		(4)
+
+	/* CPLD SPI devices */
+#define DEVICE_EEPROM	0	/* Configuration eeprom */
+#define DEVICE_MAC	1	/* MAC eeprom (LPD79524) */
+#define DEVICE_CODEC	2	/* Audio codec */
+#define DEVICE_TOUCH	3	/* Touch screen (LPD79520) */
+
+/* ----- Globals */
+
+/* ----- Prototypes */
+
+//extern struct ssp_driver lh79520_i2s_driver;
+extern struct ssp_driver lh7a400_cpld_ssp_driver;
+
+#endif  /* __SSP_H__ */
diff --git a/arch/arm/mach-lh7a40x/include/mach/system.h b/arch/arm/mach-lh7a40x/include/mach/system.h
new file mode 100644
index 000000000000..fa46bb1ef07b
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/system.h
@@ -0,0 +1,19 @@
+/* arch/arm/mach-lh7a40x/include/mach/system.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle ();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset (0);
+}
diff --git a/arch/arm/mach-lh7a40x/include/mach/timex.h b/arch/arm/mach-lh7a40x/include/mach/timex.h
new file mode 100644
index 000000000000..08028cef1b3b
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/timex.h
@@ -0,0 +1,17 @@
+/* arch/arm/mach-lh7a40x/include/mach/timex.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/constants.h>
+
+#define CLOCK_TICK_RATE		(PLL_CLOCK/6/16)
+
+/*
+#define CLOCK_TICK_RATE		3686400
+*/
diff --git a/arch/arm/mach-lh7a40x/include/mach/uncompress.h b/arch/arm/mach-lh7a40x/include/mach/uncompress.h
new file mode 100644
index 000000000000..55b80d479eb4
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/uncompress.h
@@ -0,0 +1,38 @@
+/* arch/arm/mach-lh7a40x/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/registers.h>
+
+#ifndef UART_R_DATA
+# define UART_R_DATA	(0x00)
+#endif
+#ifndef UART_R_STATUS
+# define UART_R_STATUS	(0x10)
+#endif
+#define nTxRdy		(0x20)	/* Not TxReady (literally Tx FIFO full) */
+
+	/* Access UART with physical addresses before MMU is setup */
+#define UART_STATUS (*(volatile unsigned long*) (UART2_PHYS + UART_R_STATUS))
+#define UART_DATA   (*(volatile unsigned long*) (UART2_PHYS + UART_R_DATA))
+
+static inline void putc(int ch)
+{
+	while (UART_STATUS & nTxRdy)
+		barrier();
+	UART_DATA = ch;
+}
+
+static inline void flush(void)
+{
+}
+
+	/* NULL functions; we don't presently need them */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-lh7a40x/include/mach/vmalloc.h b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
new file mode 100644
index 000000000000..3fbd49490bb9
--- /dev/null
+++ b/arch/arm/mach-lh7a40x/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/* arch/arm/mach-lh7a40x/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2004 Coastal Environmental Systems
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  version 2 as published by the Free Software Foundation.
+ *
+ */
+#define VMALLOC_END       (0xe8000000)
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a400.c b/arch/arm/mach-lh7a40x/irq-lh7a400.c
index 9472bbebd8ab..1ad3afcf6b3d 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a400.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a400.c
@@ -12,10 +12,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-lh7a40x/irq-lh7a404.c b/arch/arm/mach-lh7a40x/irq-lh7a404.c
index 9b28389035e6..12b045b688c6 100644
--- a/arch/arm/mach-lh7a40x/irq-lh7a404.c
+++ b/arch/arm/mach-lh7a40x/irq-lh7a404.c
@@ -12,10 +12,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
index 66e1ed3961ea..0d5063ebda10 100644
--- a/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/irq-lpd7a40x.c
@@ -13,10 +13,10 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-lh7a40x/ssp-cpld.c b/arch/arm/mach-lh7a40x/ssp-cpld.c
index a10830186dac..51fbef9601b9 100644
--- a/arch/arm/mach-lh7a40x/ssp-cpld.c
+++ b/arch/arm/mach-lh7a40x/ssp-cpld.c
@@ -46,9 +46,9 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/ssp.h>
+#include <mach/ssp.h>
 
 //#define TALK
 
diff --git a/arch/arm/mach-lh7a40x/time.c b/arch/arm/mach-lh7a40x/time.c
index e50e60b33851..7fe9e06cf662 100644
--- a/arch/arm/mach-lh7a40x/time.c
+++ b/arch/arm/mach-lh7a40x/time.c
@@ -14,7 +14,7 @@
 #include <linux/irq.h>
 #include <linux/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c
index ba25e56ade58..70ca56bb6f33 100644
--- a/arch/arm/mach-loki/addr-map.c
+++ b/arch/arm/mach-loki/addr-map.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c
index 410f50399dd3..e20cdbca1ebe 100644
--- a/arch/arm/mach-loki/common.c
+++ b/arch/arm/mach-loki/common.c
@@ -18,7 +18,7 @@
 #include <asm/timex.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/loki.h>
+#include <mach/loki.h>
 #include <asm/plat-orion/orion_nand.h>
 #include <asm/plat-orion/time.h>
 #include "common.h"
diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S
new file mode 100644
index 000000000000..a8c20bd2f951
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-loki/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/loki.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =LOKI_REGS_PHYS_BASE
+	ldrne	\rx, =LOKI_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-loki/include/mach/dma.h b/arch/arm/mach-loki/include/mach/dma.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-loki/include/mach/entry-macro.S b/arch/arm/mach-loki/include/mach/entry-macro.S
new file mode 100644
index 000000000000..332af38ec13c
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/entry-macro.S
@@ -0,0 +1,30 @@
+/*
+ * arch/arm/mach-loki/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/loki.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\irqstat, [\base, #IRQ_CAUSE_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_OFF]
+	mov	\irqnr, #0
+	ands	\irqstat, \irqstat, \tmp
+	clzne	\irqnr, \irqstat
+	rsbne	\irqnr, \irqnr, #31
+	.endm
diff --git a/arch/arm/mach-loki/include/mach/hardware.h b/arch/arm/mach-loki/include/mach/hardware.h
new file mode 100644
index 000000000000..d7bfc8f17729
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/hardware.h
@@ -0,0 +1,15 @@
+/*
+ * arch/arm/mach-loki/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "loki.h"
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/io.h b/arch/arm/mach-loki/include/mach/io.h
new file mode 100644
index 000000000000..a373cd582c84
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-loki/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "loki.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE)
+					+ LOKI_PCIE0_IO_VIRT_BASE);
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/irqs.h b/arch/arm/mach-loki/include/mach/irqs.h
new file mode 100644
index 000000000000..9fbd3326867b
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/irqs.h
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-loki/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Loki (88RC8480) SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "loki.h"	/* need GPIO_MAX */
+
+/*
+ * Interrupt Controller
+ */
+#define IRQ_LOKI_PCIE_A_CPU_DRBL	0
+#define IRQ_LOKI_CPU_PCIE_A_DRBL	1
+#define IRQ_LOKI_PCIE_B_CPU_DRBL	2
+#define IRQ_LOKI_CPU_PCIE_B_DRBL	3
+#define IRQ_LOKI_COM_A_ERR		6
+#define IRQ_LOKI_COM_A_IN		7
+#define IRQ_LOKI_COM_A_OUT		8
+#define IRQ_LOKI_COM_B_ERR		9
+#define IRQ_LOKI_COM_B_IN		10
+#define IRQ_LOKI_COM_B_OUT		11
+#define IRQ_LOKI_DMA_A			12
+#define IRQ_LOKI_DMA_B			13
+#define IRQ_LOKI_SAS_A			14
+#define IRQ_LOKI_SAS_B			15
+#define IRQ_LOKI_DDR			16
+#define IRQ_LOKI_XOR			17
+#define IRQ_LOKI_BRIDGE			18
+#define IRQ_LOKI_PCIE_A_ERR		20
+#define IRQ_LOKI_PCIE_A_INT		21
+#define IRQ_LOKI_PCIE_B_ERR		22
+#define IRQ_LOKI_PCIE_B_INT		23
+#define IRQ_LOKI_GBE_A_INT		24
+#define IRQ_LOKI_GBE_B_INT		25
+#define IRQ_LOKI_DEV_ERR		26
+#define IRQ_LOKI_UART0			27
+#define IRQ_LOKI_UART1			28
+#define IRQ_LOKI_TWSI			29
+#define IRQ_LOKI_GPIO_23_0		30
+#define IRQ_LOKI_GPIO_25_24		31
+
+/*
+ * Loki General Purpose Pins
+ */
+#define IRQ_LOKI_GPIO_START	32
+#define NR_GPIO_IRQS		GPIO_MAX
+
+#define NR_IRQS			(IRQ_LOKI_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/loki.h b/arch/arm/mach-loki/include/mach/loki.h
new file mode 100644
index 000000000000..c00af6ba5578
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/loki.h
@@ -0,0 +1,97 @@
+/*
+ * arch/arm/mach-loki/include/mach/loki.h
+ *
+ * Generic definitions for Marvell Loki (88RC8480) SoC flavors
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_LOKI_H
+#define __ASM_ARCH_LOKI_H
+
+/*
+ * Marvell Loki (88RC8480) address maps.
+ *
+ * phys
+ * d0000000	on-chip peripheral registers
+ * e0000000	PCIe 0 Memory space
+ * e8000000	PCIe 1 Memory space
+ * f0000000	PCIe 0 I/O space
+ * f0100000	PCIe 1 I/O space
+ *
+ * virt		phys		size
+ * fed00000	d0000000	1M	on-chip peripheral registers
+ * fee00000	f0000000	64K	PCIe 0 I/O space
+ * fef00000	f0100000	64K	PCIe 1 I/O space
+ */
+
+#define LOKI_REGS_PHYS_BASE		0xd0000000
+#define LOKI_REGS_VIRT_BASE		0xfed00000
+#define LOKI_REGS_SIZE			SZ_1M
+
+#define LOKI_PCIE0_IO_PHYS_BASE		0xf0000000
+#define LOKI_PCIE0_IO_VIRT_BASE		0xfee00000
+#define LOKI_PCIE0_IO_BUS_BASE		0x00000000
+#define LOKI_PCIE0_IO_SIZE		SZ_64K
+
+#define LOKI_PCIE1_IO_PHYS_BASE		0xf0100000
+#define LOKI_PCIE1_IO_VIRT_BASE		0xfef00000
+#define LOKI_PCIE1_IO_BUS_BASE		0x00000000
+#define LOKI_PCIE1_IO_SIZE		SZ_64K
+
+#define LOKI_PCIE0_MEM_PHYS_BASE	0xe0000000
+#define LOKI_PCIE0_MEM_SIZE		SZ_128M
+
+#define LOKI_PCIE1_MEM_PHYS_BASE	0xe8000000
+#define LOKI_PCIE1_MEM_SIZE		SZ_128M
+
+/*
+ * Register Map
+ */
+#define DEV_BUS_PHYS_BASE	(LOKI_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE	(LOKI_REGS_VIRT_BASE | 0x10000)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
+
+#define BRIDGE_VIRT_BASE	(LOKI_REGS_VIRT_BASE | 0x20000)
+#define  BRIDGE_REG(x)		(BRIDGE_VIRT_BASE | (x))
+#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define   SOFT_RESET_OUT_EN	0x00000004
+#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define   SOFT_RESET		0x00000001
+#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define   BRIDGE_INT_TIMER0	0x0002
+#define   BRIDGE_INT_TIMER1	0x0004
+#define   BRIDGE_INT_TIMER1_CLR	0x0004
+#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define   IRQ_CAUSE_OFF		0x0000
+#define   IRQ_MASK_OFF		0x0004
+#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
+
+#define PCIE0_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0x30000)
+
+#define PCIE1_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0x40000)
+
+#define SAS0_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0x80000)
+
+#define SAS1_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0x90000)
+
+#define GE0_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0xa0000)
+#define GE0_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xa0000)
+
+#define GE1_PHYS_BASE		(LOKI_REGS_PHYS_BASE | 0xb0000)
+#define GE1_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xb0000)
+
+#define DDR_VIRT_BASE		(LOKI_REGS_VIRT_BASE | 0xf0000)
+#define DDR_REG(x)		(DDR_VIRT_BASE | (x))
+
+
+#define GPIO_MAX		8
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/memory.h b/arch/arm/mach-loki/include/mach/memory.h
new file mode 100644
index 000000000000..a39533ab489d
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-loki/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h
new file mode 100644
index 000000000000..8db1147d4ec5
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-loki/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/loki.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif
diff --git a/arch/arm/mach-loki/include/mach/timex.h b/arch/arm/mach-loki/include/mach/timex.h
new file mode 100644
index 000000000000..9df210915297
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/timex.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-loki/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
+
+#define LOKI_TCLK		180000000
diff --git a/arch/arm/mach-loki/include/mach/uncompress.h b/arch/arm/mach-loki/include/mach/uncompress.h
new file mode 100644
index 000000000000..90b2a7e65da3
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-loki/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/loki.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-loki/include/mach/vmalloc.h b/arch/arm/mach-loki/include/mach/vmalloc.h
new file mode 100644
index 000000000000..8dc3bfcbf9f0
--- /dev/null
+++ b/arch/arm/mach-loki/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-loki/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe800000
diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c
index d1b9e6e6253a..2cc9ac9b488f 100644
--- a/arch/arm/mach-loki/lb88rc8480-setup.c
+++ b/arch/arm/mach-loki/lb88rc8480-setup.c
@@ -19,7 +19,7 @@
 #include <linux/mv643xx_eth.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/loki.h>
+#include <mach/loki.h>
 #include "common.h"
 
 #define LB88RC8480_FLASH_BOOT_CS_BASE	0xf8000000
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 86dfb2b5261c..995afc4ade4b 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -19,14 +19,14 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/board.h>
+#include <mach/msm_iomap.h>
 
 #include <asm/io.h>
 #include <asm/delay.h>
diff --git a/arch/arm/mach-msm/common.c b/arch/arm/mach-msm/common.c
index 3f5d3362f887..3a511368a5d8 100644
--- a/arch/arm/mach-msm/common.c
+++ b/arch/arm/mach-msm/common.c
@@ -28,9 +28,9 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 struct flash_platform_data msm_nand_data = {
 	.parts		= 0,
diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c
index 8b0f339b3274..9de08265d974 100644
--- a/arch/arm/mach-msm/dma.c
+++ b/arch/arm/mach-msm/dma.c
@@ -15,7 +15,7 @@
 
 #include <asm/io.h>
 #include <linux/interrupt.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #define MSM_DMOV_CHANNEL_COUNT 16
 
diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S
index 2b1cb7f16943..6a94f0527137 100644
--- a/arch/arm/mach-msm/idle.S
+++ b/arch/arm/mach-msm/idle.S
@@ -1,4 +1,4 @@
-/* linux/include/asm-arm/arch-msm/idle.S
+/* arch/arm/mach-msm/include/mach/idle.S
  *
  * Idle processing for MSM7K - work around bugs with SWFI.
  *
diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h
new file mode 100644
index 000000000000..a7639493c095
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/board.h
@@ -0,0 +1,37 @@
+/* arch/arm/mach-msm/include/mach/board.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_BOARD_H
+#define __ASM_ARCH_MSM_BOARD_H
+
+#include <linux/types.h>
+
+/* platform device data structures */
+
+struct msm_mddi_platform_data
+{
+	void (*panel_power)(int on);
+	unsigned has_vsync_irq:1;
+};
+
+/* common init routines for use by arch/arm/mach-msm/board-*.c */
+
+void __init msm_add_devices(void);
+void __init msm_map_common_io(void);
+void __init msm_init_irq(void);
+void __init msm_init_gpio(void);
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
new file mode 100644
index 000000000000..528eef4b605c
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -0,0 +1,40 @@
+/* arch/arm/mach-msm7200/include/mach/debug-macro.S
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/hardware.h>
+#include <mach/msm_iomap.h>
+
+	.macro	addruart,rx
+	@ see if the MMU is enabled and select appropriate base address
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1
+	ldreq	\rx, =MSM_UART1_PHYS
+	ldrne	\rx, =MSM_UART1_BASE
+	.endm
+
+	.macro	senduart,rd,rx
+	str	\rd, [\rx, #0x0C]
+	.endm
+
+	.macro	waituart,rd,rx
+	@ wait for TX_READY
+1:	ldr	\rd, [\rx, #0x08]
+	tst	\rd, #0x04
+	beq	1b
+	.endm
+
+	.macro	busyuart,rd,rx
+	.endm
diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h
new file mode 100644
index 000000000000..ad1c87f86d10
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/dma.h
@@ -0,0 +1,151 @@
+/* arch/arm/mach-msm/include/mach/dma.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_DMA_H
+
+#include <linux/list.h>
+#include <mach/msm_iomap.h>
+
+struct msm_dmov_cmd {
+	struct list_head list;
+	unsigned int cmdptr;
+	void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result);
+/*	void (*user_result_func)(struct msm_dmov_cmd *cmd); */
+};
+
+void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd);
+void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd);
+int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr);
+/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */
+
+
+
+#define DMOV_SD0(off, ch) (MSM_DMOV_BASE + 0x0000 + (off) + ((ch) << 2))
+#define DMOV_SD1(off, ch) (MSM_DMOV_BASE + 0x0400 + (off) + ((ch) << 2))
+#define DMOV_SD2(off, ch) (MSM_DMOV_BASE + 0x0800 + (off) + ((ch) << 2))
+#define DMOV_SD3(off, ch) (MSM_DMOV_BASE + 0x0C00 + (off) + ((ch) << 2))
+
+/* only security domain 3 is available to the ARM11
+ * SD0 -> mARM trusted, SD1 -> mARM nontrusted, SD2 -> aDSP, SD3 -> aARM
+ */
+
+#define DMOV_CMD_PTR(ch)      DMOV_SD3(0x000, ch)
+#define DMOV_CMD_LIST         (0 << 29) /* does not work */
+#define DMOV_CMD_PTR_LIST     (1 << 29) /* works */
+#define DMOV_CMD_INPUT_CFG    (2 << 29) /* untested */
+#define DMOV_CMD_OUTPUT_CFG   (3 << 29) /* untested */
+#define DMOV_CMD_ADDR(addr)   ((addr) >> 3)
+
+#define DMOV_RSLT(ch)         DMOV_SD3(0x040, ch)
+#define DMOV_RSLT_VALID       (1 << 31) /* 0 == host has empties result fifo */
+#define DMOV_RSLT_ERROR       (1 << 3)
+#define DMOV_RSLT_FLUSH       (1 << 2)
+#define DMOV_RSLT_DONE        (1 << 1)  /* top pointer done */
+#define DMOV_RSLT_USER        (1 << 0)  /* command with FR force result */
+
+#define DMOV_FLUSH0(ch)       DMOV_SD3(0x080, ch)
+#define DMOV_FLUSH1(ch)       DMOV_SD3(0x0C0, ch)
+#define DMOV_FLUSH2(ch)       DMOV_SD3(0x100, ch)
+#define DMOV_FLUSH3(ch)       DMOV_SD3(0x140, ch)
+#define DMOV_FLUSH4(ch)       DMOV_SD3(0x180, ch)
+#define DMOV_FLUSH5(ch)       DMOV_SD3(0x1C0, ch)
+
+#define DMOV_STATUS(ch)       DMOV_SD3(0x200, ch)
+#define DMOV_STATUS_RSLT_COUNT(n)    (((n) >> 29))
+#define DMOV_STATUS_CMD_COUNT(n)     (((n) >> 27) & 3)
+#define DMOV_STATUS_RSLT_VALID       (1 << 1)
+#define DMOV_STATUS_CMD_PTR_RDY      (1 << 0)
+
+#define DMOV_ISR              DMOV_SD3(0x380, 0)
+
+#define DMOV_CONFIG(ch)       DMOV_SD3(0x300, ch)
+#define DMOV_CONFIG_FORCE_TOP_PTR_RSLT (1 << 2)
+#define DMOV_CONFIG_FORCE_FLUSH_RSLT   (1 << 1)
+#define DMOV_CONFIG_IRQ_EN             (1 << 0)
+
+/* channel assignments */
+
+#define DMOV_NAND_CHAN        7
+#define DMOV_NAND_CRCI_CMD    5
+#define DMOV_NAND_CRCI_DATA   4
+
+#define DMOV_SDC1_CHAN        8
+#define DMOV_SDC1_CRCI        6
+
+#define DMOV_SDC2_CHAN        8
+#define DMOV_SDC2_CRCI        7
+
+#define DMOV_TSIF_CHAN        10
+#define DMOV_TSIF_CRCI        10
+
+#define DMOV_USB_CHAN         11
+
+/* no client rate control ifc (eg, ram) */
+#define DMOV_NONE_CRCI        0
+
+
+/* If the CMD_PTR register has CMD_PTR_LIST selected, the data mover
+ * is going to walk a list of 32bit pointers as described below.  Each
+ * pointer points to a *array* of dmov_s, etc structs.  The last pointer
+ * in the list is marked with CMD_PTR_LP.  The last struct in each array
+ * is marked with CMD_LC (see below).
+ */
+#define CMD_PTR_ADDR(addr)  ((addr) >> 3)
+#define CMD_PTR_LP          (1 << 31) /* last pointer */
+#define CMD_PTR_PT          (3 << 29) /* ? */
+
+/* Single Item Mode */
+typedef struct {
+	unsigned cmd;
+	unsigned src;
+	unsigned dst;
+	unsigned len;
+} dmov_s;
+
+/* Scatter/Gather Mode */
+typedef struct {
+	unsigned cmd;
+	unsigned src_dscr;
+	unsigned dst_dscr;
+	unsigned _reserved;
+} dmov_sg;
+
+/* bits for the cmd field of the above structures */
+
+#define CMD_LC      (1 << 31)  /* last command */
+#define CMD_FR      (1 << 22)  /* force result -- does not work? */
+#define CMD_OCU     (1 << 21)  /* other channel unblock */
+#define CMD_OCB     (1 << 20)  /* other channel block */
+#define CMD_TCB     (1 << 19)  /* ? */
+#define CMD_DAH     (1 << 18)  /* destination address hold -- does not work?*/
+#define CMD_SAH     (1 << 17)  /* source address hold -- does not work? */
+
+#define CMD_MODE_SINGLE     (0 << 0) /* dmov_s structure used */
+#define CMD_MODE_SG         (1 << 0) /* untested */
+#define CMD_MODE_IND_SG     (2 << 0) /* untested */
+#define CMD_MODE_BOX        (3 << 0) /* untested */
+
+#define CMD_DST_SWAP_BYTES  (1 << 14) /* exchange each byte n with byte n+1 */
+#define CMD_DST_SWAP_SHORTS (1 << 15) /* exchange each short n with short n+1 */
+#define CMD_DST_SWAP_WORDS  (1 << 16) /* exchange each word n with word n+1 */
+
+#define CMD_SRC_SWAP_BYTES  (1 << 11) /* exchange each byte n with byte n+1 */
+#define CMD_SRC_SWAP_SHORTS (1 << 12) /* exchange each short n with short n+1 */
+#define CMD_SRC_SWAP_WORDS  (1 << 13) /* exchange each word n with word n+1 */
+
+#define CMD_DST_CRCI(n)     (((n) & 15) << 7)
+#define CMD_SRC_CRCI(n)     (((n) & 15) << 3)
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S
new file mode 100644
index 000000000000..d2259486bcb1
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/entry-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-msm7200/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/msm_iomap.h>
+
+ 	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_preamble, base, tmp
+	@ enable imprecise aborts
+	cpsie	a
+	mov	\base, #MSM_VIC_BASE
+	.endm
+
+	.macro	arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ 0xD0 has irq# or old irq# if the irq has been handled
+	@ 0xD4 has irq# or -1 if none pending *but* if you just
+	@ read 0xD4 you never get the first irq for some reason
+	ldr	\irqnr, [\base, #0xD0]
+	ldr	\irqnr, [\base, #0xD4]
+	cmp	\irqnr, #0xffffffff
+	.endm
diff --git a/arch/arm/mach-msm/include/mach/hardware.h b/arch/arm/mach-msm/include/mach/hardware.h
new file mode 100644
index 000000000000..2d126091ae41
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/hardware.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-msm/include/mach/hardware.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_HARDWARE_H
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/io.h b/arch/arm/mach-msm/include/mach/io.h
new file mode 100644
index 000000000000..c6a2feb268b0
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/io.h
@@ -0,0 +1,33 @@
+/* arch/arm/mach-msm/include/mach/io.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __arch_ioremap __msm_ioremap
+#define __arch_iounmap __iounmap
+
+void __iomem *__msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype);
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)         __io(a)
+#define __mem_pci(a)    (a)
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/irqs.h b/arch/arm/mach-msm/include/mach/irqs.h
new file mode 100644
index 000000000000..9dd4cf8a2693
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/irqs.h
@@ -0,0 +1,90 @@
+/* arch/arm/mach-msm/include/mach/irqs.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IRQS_H
+#define __ASM_ARCH_MSM_IRQS_H
+
+/* MSM ARM11 Interrupt Numbers */
+/* See 80-VE113-1 A, pp219-221     */
+
+#define INT_A9_M2A_0         0
+#define INT_A9_M2A_1         1
+#define INT_A9_M2A_2         2
+#define INT_A9_M2A_3         3
+#define INT_A9_M2A_4         4
+#define INT_A9_M2A_5         5
+#define INT_A9_M2A_6         6
+#define INT_GP_TIMER_EXP     7
+#define INT_DEBUG_TIMER_EXP  8
+#define INT_UART1            9
+#define INT_UART2            10
+#define INT_UART3            11
+#define INT_UART1_RX         12
+#define INT_UART2_RX         13
+#define INT_UART3_RX         14
+#define INT_USB_OTG          15
+#define INT_MDDI_PRI         16
+#define INT_MDDI_EXT         17
+#define INT_MDDI_CLIENT      18
+#define INT_MDP              19
+#define INT_GRAPHICS         20
+#define INT_ADM_AARM         21
+#define INT_ADSP_A11         22
+#define INT_ADSP_A9_A11      23
+#define INT_SDC1_0           24
+#define INT_SDC1_1           25
+#define INT_SDC2_0           26
+#define INT_SDC2_1           27
+#define INT_KEYSENSE         28
+#define INT_TCHSCRN_SSBI     29
+#define INT_TCHSCRN1         30
+#define INT_TCHSCRN2         31
+
+#define INT_GPIO_GROUP1      (32 + 0)
+#define INT_GPIO_GROUP2      (32 + 1)
+#define INT_PWB_I2C          (32 + 2)
+#define INT_SOFTRESET        (32 + 3)
+#define INT_NAND_WR_ER_DONE  (32 + 4)
+#define INT_NAND_OP_DONE     (32 + 5)
+#define INT_PBUS_ARM11       (32 + 6)
+#define INT_AXI_MPU_SMI      (32 + 7)
+#define INT_AXI_MPU_EBI1     (32 + 8)
+#define INT_AD_HSSD          (32 + 9)
+#define INT_ARM11_PMU        (32 + 10)
+#define INT_ARM11_DMA        (32 + 11)
+#define INT_TSIF_IRQ         (32 + 12)
+#define INT_UART1DM_IRQ      (32 + 13)
+#define INT_UART1DM_RX       (32 + 14)
+#define INT_USB_HS           (32 + 15)
+#define INT_SDC3_0           (32 + 16)
+#define INT_SDC3_1           (32 + 17)
+#define INT_SDC4_0           (32 + 18)
+#define INT_SDC4_1           (32 + 19)
+#define INT_UART2DM_RX       (32 + 20)
+#define INT_UART2DM_IRQ      (32 + 21)
+
+/* 22-31 are reserved */
+
+#define MSM_IRQ_BIT(irq)     (1 << ((irq) & 31))
+
+#define NR_MSM_IRQS 64
+#define NR_GPIO_IRQS 122
+#define NR_BOARD_IRQS 64
+#define NR_IRQS (NR_MSM_IRQS + NR_GPIO_IRQS + NR_BOARD_IRQS)
+
+#define MSM_GPIO_TO_INT(n) (NR_MSM_IRQS + (n))
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h
new file mode 100644
index 000000000000..63fd47f2e62e
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/memory.h
@@ -0,0 +1,27 @@
+/* arch/arm/mach-msm/include/mach/memory.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/* physical offset of RAM */
+#define PHYS_OFFSET		UL(0x10000000)
+
+/* bus address and physical addresses are identical */
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+#endif
+
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
new file mode 100644
index 000000000000..e221f58ceea3
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -0,0 +1,104 @@
+/* arch/arm/mach-msm/include/mach/msm_iomap.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ *
+ * The MSM peripherals are spread all over across 768MB of physical
+ * space, which makes just having a simple IO_ADDRESS macro to slide
+ * them into the right virtual location rough.  Instead, we will
+ * provide a master phys->virt mapping for peripherals here.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_IOMAP_H
+#define __ASM_ARCH_MSM_IOMAP_H
+
+#include <asm/sizes.h>
+
+/* Physical base address and size of peripherals.
+ * Ordered by the virtual base addresses they will be mapped at.
+ *
+ * MSM_VIC_BASE must be an value that can be loaded via a "mov"
+ * instruction, otherwise entry-macro.S will not compile.
+ *
+ * If you add or remove entries here, you'll want to edit the
+ * msm_io_desc array in arch/arm/mach-msm/io.c to reflect your
+ * changes.
+ *
+ */
+
+#define MSM_VIC_BASE          0xE0000000
+#define MSM_VIC_PHYS          0xC0000000
+#define MSM_VIC_SIZE          SZ_4K
+
+#define MSM_CSR_BASE          0xE0001000
+#define MSM_CSR_PHYS          0xC0100000
+#define MSM_CSR_SIZE          SZ_4K
+
+#define MSM_GPT_PHYS          MSM_CSR_PHYS
+#define MSM_GPT_BASE          MSM_CSR_BASE
+#define MSM_GPT_SIZE          SZ_4K
+
+#define MSM_DMOV_BASE         0xE0002000
+#define MSM_DMOV_PHYS         0xA9700000
+#define MSM_DMOV_SIZE         SZ_4K
+
+#define MSM_UART1_BASE        0xE0003000
+#define MSM_UART1_PHYS        0xA9A00000
+#define MSM_UART1_SIZE        SZ_4K
+
+#define MSM_UART2_BASE        0xE0004000
+#define MSM_UART2_PHYS        0xA9B00000
+#define MSM_UART2_SIZE        SZ_4K
+
+#define MSM_UART3_BASE        0xE0005000
+#define MSM_UART3_PHYS        0xA9C00000
+#define MSM_UART3_SIZE        SZ_4K
+
+#define MSM_I2C_BASE          0xE0006000
+#define MSM_I2C_PHYS          0xA9900000
+#define MSM_I2C_SIZE          SZ_4K
+
+#define MSM_GPIO1_BASE        0xE0007000
+#define MSM_GPIO1_PHYS        0xA9200000
+#define MSM_GPIO1_SIZE        SZ_4K
+
+#define MSM_GPIO2_BASE        0xE0008000
+#define MSM_GPIO2_PHYS        0xA9300000
+#define MSM_GPIO2_SIZE        SZ_4K
+
+#define MSM_HSUSB_BASE        0xE0009000
+#define MSM_HSUSB_PHYS        0xA0800000
+#define MSM_HSUSB_SIZE        SZ_4K
+
+#define MSM_CLK_CTL_BASE      0xE000A000
+#define MSM_CLK_CTL_PHYS      0xA8600000
+#define MSM_CLK_CTL_SIZE      SZ_4K
+
+#define MSM_PMDH_BASE         0xE000B000
+#define MSM_PMDH_PHYS         0xAA600000
+#define MSM_PMDH_SIZE         SZ_4K
+
+#define MSM_EMDH_BASE         0xE000C000
+#define MSM_EMDH_PHYS         0xAA700000
+#define MSM_EMDH_SIZE         SZ_4K
+
+#define MSM_MDP_BASE          0xE0010000
+#define MSM_MDP_PHYS          0xAA200000
+#define MSM_MDP_SIZE          0x000F0000
+
+#define MSM_SHARED_RAM_BASE   0xE0100000
+#define MSM_SHARED_RAM_PHYS   0x01F00000
+#define MSM_SHARED_RAM_SIZE   SZ_1M
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
new file mode 100644
index 000000000000..f05ad2e0f235
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-msm/include/mach/system.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <mach/hardware.h>
+
+void arch_idle(void);
+
+static inline void arch_reset(char mode)
+{
+	for (;;) ;  /* depends on IPC w/ other core */
+}
diff --git a/arch/arm/mach-msm/include/mach/timex.h b/arch/arm/mach-msm/include/mach/timex.h
new file mode 100644
index 000000000000..a62e6b215aec
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/timex.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-msm/include/mach/timex.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_TIMEX_H
+#define __ASM_ARCH_MSM_TIMEX_H
+
+#define CLOCK_TICK_RATE		1000000
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
new file mode 100644
index 000000000000..026e8955ace9
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/uncompress.h
@@ -0,0 +1,36 @@
+/* arch/arm/mach-msm/include/mach/uncompress.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
+
+#include "hardware.h"
+
+static void putc(int c)
+{
+}
+
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+static inline void arch_decomp_wdog(void)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/vmalloc.h b/arch/arm/mach-msm/include/mach/vmalloc.h
new file mode 100644
index 000000000000..05f81fd8623c
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/vmalloc.h
@@ -0,0 +1,22 @@
+/* arch/arm/mach-msm/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __ASM_ARCH_MSM_VMALLOC_H
+#define __ASM_ARCH_MSM_VMALLOC_H
+
+#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
+
+#endif
+
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index c39edb994a88..5976200de99b 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -19,13 +19,13 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/page.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/board.h>
+#include <mach/board.h>
 
 #define MSM_DEVICE(name) { \
 		.virtual = MSM_##name##_BASE, \
diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c
index 24158040b789..66901baf8c8e 100644
--- a/arch/arm/mach-msm/irq.c
+++ b/arch/arm/mach-msm/irq.c
@@ -21,11 +21,11 @@
 #include <linux/timer.h>
 
 #include <linux/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include <asm/io.h>
 
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 
 #define VIC_REG(off) (MSM_VIC_BASE + (off))
 
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index bd4732d1ab3e..9f02d7dca985 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -22,7 +22,7 @@
 #include <linux/delay.h>
 
 #include <asm/mach/time.h>
-#include <asm/arch/msm_iomap.h>
+#include <mach/msm_iomap.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index d27b83b7bf62..e633f9cb239f 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -17,7 +17,7 @@
 #include <linux/ata_platform.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/mv78xx0.h>
+#include <mach/mv78xx0.h>
 #include <asm/plat-orion/cache-feroceon-l2.h>
 #include <asm/plat-orion/ehci-orion.h>
 #include <asm/plat-orion/orion_nand.h>
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 0c93d19193df..a2d0c9783604 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -13,7 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
-#include <asm/arch/mv78xx0.h>
+#include <mach/mv78xx0.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include "common.h"
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
new file mode 100644
index 000000000000..a06442fbd341
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/mv78xx0.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =MV78XX0_REGS_PHYS_BASE
+	ldrne	\rx, =MV78XX0_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-mv78xx0/include/mach/dma.h b/arch/arm/mach-mv78xx0/include/mach/dma.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
new file mode 100644
index 000000000000..ed4a46bcd3b0
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell MV78xx0 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/mv78xx0.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ check low interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
+	mov	\irqnr, #31
+	ands	\irqstat, \irqstat, \tmp
+
+	@ if no low interrupts set, check high interrupts
+	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
+	moveq	\irqnr, #63
+	andeqs	\irqstat, \irqstat, \tmp
+
+	@ find first active interrupt source
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-mv78xx0/include/mach/hardware.h b/arch/arm/mach-mv78xx0/include/mach/hardware.h
new file mode 100644
index 000000000000..5d887557e123
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/hardware.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "mv78xx0.h"
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO			0x00001000
+#define PCIBIOS_MIN_MEM			0x01000000
+#define PCIMEM_BASE			MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/io.h b/arch/arm/mach-mv78xx0/include/mach/io.h
new file mode 100644
index 000000000000..450e0e1ad092
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "mv78xx0.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
+					+ MV78XX0_PCIE_IO_VIRT_BASE(0));
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/irqs.h b/arch/arm/mach-mv78xx0/include/mach/irqs.h
new file mode 100644
index 000000000000..995d7fb8d06f
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/irqs.h
@@ -0,0 +1,91 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell MV78xx0 SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "mv78xx0.h"	/* need GPIO_MAX */
+
+/*
+ * MV78xx0 Low Interrupt Controller
+ */
+#define IRQ_MV78XX0_ERR		0
+#define IRQ_MV78XX0_SPI		1
+#define IRQ_MV78XX0_I2C_0	2
+#define IRQ_MV78XX0_I2C_1	3
+#define IRQ_MV78XX0_IDMA_0	4
+#define IRQ_MV78XX0_IDMA_1	5
+#define IRQ_MV78XX0_IDMA_2	6
+#define IRQ_MV78XX0_IDMA_3	7
+#define IRQ_MV78XX0_TIMER_0	8
+#define IRQ_MV78XX0_TIMER_1	9
+#define IRQ_MV78XX0_TIMER_2	10
+#define IRQ_MV78XX0_TIMER_3	11
+#define IRQ_MV78XX0_UART_0	12
+#define IRQ_MV78XX0_UART_1	13
+#define IRQ_MV78XX0_UART_2	14
+#define IRQ_MV78XX0_UART_3	15
+#define IRQ_MV78XX0_USB_0	16
+#define IRQ_MV78XX0_USB_1	17
+#define IRQ_MV78XX0_USB_2	18
+#define IRQ_MV78XX0_CRYPTO	19
+#define IRQ_MV78XX0_SDIO_0	20
+#define IRQ_MV78XX0_SDIO_1	21
+#define IRQ_MV78XX0_XOR_0	22
+#define IRQ_MV78XX0_XOR_1	23
+#define IRQ_MV78XX0_I2S_0	24
+#define IRQ_MV78XX0_I2S_1	25
+#define IRQ_MV78XX0_SATA	26
+#define IRQ_MV78XX0_TDMI	27
+
+/*
+ * MV78xx0 High Interrupt Controller
+ */
+#define IRQ_MV78XX0_PCIE_00	32
+#define IRQ_MV78XX0_PCIE_01	33
+#define IRQ_MV78XX0_PCIE_02	34
+#define IRQ_MV78XX0_PCIE_03	35
+#define IRQ_MV78XX0_PCIE_10	36
+#define IRQ_MV78XX0_PCIE_11	37
+#define IRQ_MV78XX0_PCIE_12	38
+#define IRQ_MV78XX0_PCIE_13	39
+#define IRQ_MV78XX0_GE00_SUM	40
+#define IRQ_MV78XX0_GE00_RX	41
+#define IRQ_MV78XX0_GE00_TX	42
+#define IRQ_MV78XX0_GE00_MISC	43
+#define IRQ_MV78XX0_GE01_SUM	44
+#define IRQ_MV78XX0_GE01_RX	45
+#define IRQ_MV78XX0_GE01_TX	46
+#define IRQ_MV78XX0_GE01_MISC	47
+#define IRQ_MV78XX0_GE10_SUM	48
+#define IRQ_MV78XX0_GE10_RX	49
+#define IRQ_MV78XX0_GE10_TX	50
+#define IRQ_MV78XX0_GE10_MISC	51
+#define IRQ_MV78XX0_GE11_SUM	52
+#define IRQ_MV78XX0_GE11_RX	53
+#define IRQ_MV78XX0_GE11_TX	54
+#define IRQ_MV78XX0_GE11_MISC	55
+#define IRQ_MV78XX0_GPIO_0_7	56
+#define IRQ_MV78XX0_GPIO_8_15	57
+#define IRQ_MV78XX0_GPIO_16_23	58
+#define IRQ_MV78XX0_GPIO_24_31	59
+#define IRQ_MV78XX0_DB_IN	60
+#define IRQ_MV78XX0_DB_OUT	61
+
+/*
+ * MV78XX0 General Purpose Pins
+ */
+#define IRQ_MV78XX0_GPIO_START	64
+#define NR_GPIO_IRQS		GPIO_MAX
+
+#define NR_IRQS			(IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h
new file mode 100644
index 000000000000..9e47a140ff7a
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/memory.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
new file mode 100644
index 000000000000..ad664178d6e1
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
@@ -0,0 +1,126 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/mv78xx0.h
+ *
+ * Generic definitions for Marvell MV78xx0 SoC flavors:
+ *  MV781x0 and MV782x0.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_MV78XX0_H
+#define __ASM_ARCH_MV78XX0_H
+
+/*
+ * Marvell MV78xx0 address maps.
+ *
+ * phys
+ * c0000000	PCIe Memory space
+ * f0800000	PCIe #0 I/O space
+ * f0900000	PCIe #1 I/O space
+ * f0a00000	PCIe #2 I/O space
+ * f0b00000	PCIe #3 I/O space
+ * f0c00000	PCIe #4 I/O space
+ * f0d00000	PCIe #5 I/O space
+ * f0e00000	PCIe #6 I/O space
+ * f0f00000	PCIe #7 I/O space
+ * f1000000	on-chip peripheral registers
+ *
+ * virt		phys		size
+ * fe400000	f102x000	16K	core-specific peripheral registers
+ * fe700000	f0800000	1M	PCIe #0 I/O space
+ * fe800000	f0900000	1M	PCIe #1 I/O space
+ * fe900000	f0a00000	1M	PCIe #2 I/O space
+ * fea00000	f0b00000	1M	PCIe #3 I/O space
+ * feb00000	f0c00000	1M	PCIe #4 I/O space
+ * fec00000	f0d00000	1M	PCIe #5 I/O space
+ * fed00000	f0e00000	1M	PCIe #6 I/O space
+ * fee00000	f0f00000	1M	PCIe #7 I/O space
+ * fef00000	f1000000	1M	on-chip peripheral registers
+ */
+#define MV78XX0_CORE0_REGS_PHYS_BASE	0xf1020000
+#define MV78XX0_CORE1_REGS_PHYS_BASE	0xf1024000
+#define MV78XX0_CORE_REGS_VIRT_BASE	0xfe400000
+#define MV78XX0_CORE_REGS_SIZE		SZ_16K
+
+#define MV78XX0_PCIE_IO_PHYS_BASE(i)	(0xf0800000 + ((i) << 20))
+#define MV78XX0_PCIE_IO_VIRT_BASE(i)	(0xfe700000 + ((i) << 20))
+#define MV78XX0_PCIE_IO_SIZE		SZ_1M
+
+#define MV78XX0_REGS_PHYS_BASE		0xf1000000
+#define MV78XX0_REGS_VIRT_BASE		0xfef00000
+#define MV78XX0_REGS_SIZE		SZ_1M
+
+#define MV78XX0_PCIE_MEM_PHYS_BASE	0xc0000000
+#define MV78XX0_PCIE_MEM_SIZE		0x30000000
+
+/*
+ * Core-specific peripheral registers.
+ */
+#define BRIDGE_VIRT_BASE	(MV78XX0_CORE_REGS_VIRT_BASE)
+#define  CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define   L2_WRITETHROUGH	0x00020000
+#define  RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define   SOFT_RESET_OUT_EN	0x00000004
+#define  SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define   SOFT_RESET		0x00000001
+#define  BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define  BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define   BRIDGE_INT_TIMER0	0x0002
+#define   BRIDGE_INT_TIMER1	0x0004
+#define   BRIDGE_INT_TIMER1_CLR	(~0x0004)
+#define  IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define   IRQ_CAUSE_LOW_OFF	0x0004
+#define   IRQ_CAUSE_HIGH_OFF	0x0008
+#define   IRQ_MASK_LOW_OFF	0x0010
+#define   IRQ_MASK_HIGH_OFF	0x0014
+#define  TIMER_VIRT_BASE	(BRIDGE_VIRT_BASE | 0x0300)
+
+/*
+ * Register Map
+ */
+#define DDR_VIRT_BASE		(MV78XX0_REGS_VIRT_BASE | 0x00000)
+#define  DDR_WINDOW_CPU0_BASE	(DDR_VIRT_BASE | 0x1500)
+#define  DDR_WINDOW_CPU1_BASE	(DDR_VIRT_BASE | 0x1700)
+
+#define DEV_BUS_PHYS_BASE	(MV78XX0_REGS_PHYS_BASE | 0x10000)
+#define DEV_BUS_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x10000)
+#define  SAMPLE_AT_RESET_LOW	(DEV_BUS_VIRT_BASE | 0x0030)
+#define  SAMPLE_AT_RESET_HIGH	(DEV_BUS_VIRT_BASE | 0x0034)
+#define  UART0_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2100)
+#define  UART2_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2200)
+#define  UART2_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2200)
+#define  UART3_PHYS_BASE	(DEV_BUS_PHYS_BASE | 0x2300)
+#define  UART3_VIRT_BASE	(DEV_BUS_VIRT_BASE | 0x2300)
+
+#define GE10_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x30000)
+#define GE11_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x34000)
+
+#define PCIE00_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x40000)
+#define PCIE01_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x44000)
+#define PCIE02_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x48000)
+#define PCIE03_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x4c000)
+
+#define USB0_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x50000)
+#define USB1_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x51000)
+#define USB2_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x52000)
+
+#define GE00_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x70000)
+#define GE01_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0x74000)
+
+#define PCIE10_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x80000)
+#define PCIE11_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x84000)
+#define PCIE12_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x88000)
+#define PCIE13_VIRT_BASE	(MV78XX0_REGS_VIRT_BASE | 0x8c000)
+
+#define SATA_PHYS_BASE		(MV78XX0_REGS_PHYS_BASE | 0xa0000)
+
+
+#define GPIO_MAX		32
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
new file mode 100644
index 000000000000..7d5179408832
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/system.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/mv78xx0.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif
diff --git a/arch/arm/mach-mv78xx0/include/mach/timex.h b/arch/arm/mach-mv78xx0/include/mach/timex.h
new file mode 100644
index 000000000000..0e8c443c723a
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-mv78xx0/include/mach/uncompress.h b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
new file mode 100644
index 000000000000..365264298e79
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/mv78xx0.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mv78xx0/include/mach/vmalloc.h b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
new file mode 100644
index 000000000000..1c4954386a84
--- /dev/null
+++ b/arch/arm/mach-mv78xx0/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-mv78xx0/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfe000000
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 60f4ee4d4532..3198abf54c90 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/pci.h>
-#include <asm/arch/mv78xx0.h>
+#include <mach/mv78xx0.h>
 #include <asm/plat-orion/irq.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index 0a29ef29c73a..c69896d011a1 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -22,10 +22,9 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/common.h>
+#include <mach/clock.h>
+#include <mach/common.h>
 #include <asm/div64.h>
-#include <asm/mach-types.h>
 
 #include "crm_regs.h"
 
diff --git a/arch/arm/mach-mx2/cpu_imx27.c b/arch/arm/mach-mx2/cpu_imx27.c
index d6b5c2e3377f..239308fe6652 100644
--- a/arch/arm/mach-mx2/cpu_imx27.c
+++ b/arch/arm/mach-mx2/cpu_imx27.c
@@ -24,7 +24,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include "crm_regs.h"
 
diff --git a/arch/arm/mach-mx2/crm_regs.h b/arch/arm/mach-mx2/crm_regs.h
index a40a9b950ce9..94644cd0a0fc 100644
--- a/arch/arm/mach-mx2/crm_regs.h
+++ b/arch/arm/mach-mx2/crm_regs.h
@@ -20,7 +20,7 @@
 #ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
 #define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 /* Register offsets */
 #define CCM_CSCR                (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index a1f44c3c5315..bd0559d5933e 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -32,7 +32,7 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Resource definition for the MXC IrDA
diff --git a/arch/arm/mach-mx2/generic.c b/arch/arm/mach-mx2/generic.c
index 07875cf00de9..dea6521d4d5c 100644
--- a/arch/arm/mach-mx2/generic.c
+++ b/arch/arm/mach-mx2/generic.c
@@ -20,7 +20,7 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 
diff --git a/arch/arm/mach-mx2/mx27ads.c b/arch/arm/mach-mx2/mx27ads.c
index a9ff01fff137..4ce56ef4d8d3 100644
--- a/arch/arm/mach-mx2/mx27ads.c
+++ b/arch/arm/mach-mx2/mx27ads.c
@@ -23,16 +23,16 @@
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-#include <asm/arch/common.h>
-#include <asm/hardware.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/iomux-mx1-mx2.h>
-#include <asm/arch/board-mx27ads.h>
+#include <mach/gpio.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx1-mx2.h>
+#include <mach/board-mx27ads.h>
 
 /* ADS's NOR flash */
 static struct physmap_flash_data mx27ads_flash_data = {
diff --git a/arch/arm/mach-mx2/pcm038.c b/arch/arm/mach-mx2/pcm038.c
index a9a28f58e714..1028f453cfc8 100644
--- a/arch/arm/mach-mx2/pcm038.c
+++ b/arch/arm/mach-mx2/pcm038.c
@@ -21,12 +21,12 @@
 #include <linux/mtd/physmap.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
-#include <asm/arch/common.h>
-#include <asm/hardware.h>
-#include <asm/arch/iomux-mx1-mx2.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-mx1-mx2.h>
 #include <asm/mach/time.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/board-pcm038.h>
+#include <mach/imx-uart.h>
+#include <mach/board-pcm038.h>
 
 /*
  * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
diff --git a/arch/arm/mach-mx2/pcm970-baseboard.c b/arch/arm/mach-mx2/pcm970-baseboard.c
index 028ac4d33684..a560cd6ad23d 100644
--- a/arch/arm/mach-mx2/pcm970-baseboard.c
+++ b/arch/arm/mach-mx2/pcm970-baseboard.c
@@ -17,8 +17,7 @@
  */
 
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
+#include <mach/hardware.h>
 #include <asm/mach/arch.h>
 
 /*
diff --git a/arch/arm/mach-mx2/serial.c b/arch/arm/mach-mx2/serial.c
index 570c02b8e5df..e31fd44f7941 100644
--- a/arch/arm/mach-mx2/serial.c
+++ b/arch/arm/mach-mx2/serial.c
@@ -20,8 +20,8 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/serial.h>
-#include <asm/hardware.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
 
 static struct resource uart0[] = {
 	{
diff --git a/arch/arm/mach-mx2/system.c b/arch/arm/mach-mx2/system.c
index 99304645299d..7b8269719d11 100644
--- a/arch/arm/mach-mx2/system.c
+++ b/arch/arm/mach-mx2/system.c
@@ -23,7 +23,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/proc-fns.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index 2f3635943e70..9f14a871ee7c 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -23,7 +23,7 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 #include <asm/div64.h>
 
 #include "crm_regs.h"
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index 5c0320fce5b6..e08c6a8ac56b 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -21,8 +21,8 @@
 #include <linux/platform_device.h>
 #include <linux/serial.h>
 #include <linux/gpio.h>
-#include <asm/hardware.h>
-#include <asm/arch/imx-uart.h>
+#include <mach/hardware.h>
+#include <mach/imx-uart.h>
 
 static struct resource uart0[] = {
 	{
diff --git a/arch/arm/mach-mx3/iomux.c b/arch/arm/mach-mx3/iomux.c
index adc51feefc1d..3dda1fe23cbf 100644
--- a/arch/arm/mach-mx3/iomux.c
+++ b/arch/arm/mach-mx3/iomux.c
@@ -21,9 +21,9 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
-#include <asm/hardware.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/iomux-mx3.h>
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/iomux-mx3.h>
 
 /*
  * IOMUX register (base) addresses
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index 41dad485ded9..30d842bd4d64 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -22,10 +22,10 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
 
 /*!
  * @file mm.c
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index eba3e0cd4283..60fb4e0d5acd 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -23,14 +23,14 @@
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/memory.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board-mx31ads.h>
+#include <mach/common.h>
+#include <mach/board-mx31ads.h>
 
 /*!
  * @file mx31ads.c
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index 1372c1a1fc3f..d363a6e79f80 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -23,15 +23,15 @@
 #include <linux/kernel.h>
 #include <linux/memory.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
 #include <asm/page.h>
 #include <asm/setup.h>
-#include <asm/arch/board-mx31lite.h>
+#include <mach/board-mx31lite.h>
 
 /*
  * This file contains the board-specific initialization routines.
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index a34ae6de266f..0a152ed15a85 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -23,15 +23,15 @@
 #include <linux/mtd/physmap.h>
 #include <linux/memory.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/arch/common.h>
-#include <asm/arch/imx-uart.h>
-#include <asm/arch/iomux-mx3.h>
-#include <asm/arch/board-pcm037.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-pcm037.h>
 
 static struct physmap_flash_data pcm037_flash_data = {
 	.width  = 2,
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index ef0ab6115c0b..24c79650f9f3 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -23,8 +23,8 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/arch/netx-regs.h>
-#include <asm/hardware.h>
+#include <mach/netx-regs.h>
+#include <mach/hardware.h>
 
 struct clk {};
 
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index fd7537f7d11e..1b40483ea753 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -22,11 +22,11 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/map.h>
 #include <asm/hardware/vic.h>
 #include <asm/io.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/netx-regs.h>
 #include <asm/mach/irq.h>
 
 static struct map_desc netx_io_desc[] __initdata = {
@@ -99,19 +99,19 @@ netx_hif_irq_type(unsigned int _irq, unsigned int type)
 
 	irq = _irq - NETX_IRQ_HIF_CHAINED(0);
 
-	if (type & __IRQT_RISEDGE) {
+	if (type & IRQ_TYPE_EDGE_RISING) {
 		DEBUG_IRQ("rising edges\n");
 		val |= (1 << 26) << irq;
 	}
-	if (type & __IRQT_FALEDGE) {
+	if (type & IRQ_TYPE_EDGE_FALLING) {
 		DEBUG_IRQ("falling edges\n");
 		val &= ~((1 << 26) << irq);
 	}
-	if (type & __IRQT_LOWLVL) {
+	if (type & IRQ_TYPE_LEVEL_LOW) {
 		DEBUG_IRQ("low level\n");
 		val &= ~((1 << 26) << irq);
 	}
-	if (type & __IRQT_HIGHLVL) {
+	if (type & IRQ_TYPE_LEVEL_HIGH) {
 		DEBUG_IRQ("high level\n");
 		val |= (1 << 26) << irq;
 	}
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..11b9d5b46390
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -0,0 +1,38 @@
+/* arch/arm/mach-netx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include "hardware.h"
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x00100000		@ physical
+		movne	\rx, #io_p2v(0x00100000)	@ virtual
+		orr	\rx, \rx, #0x00000a00
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0]
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x18]
+		tst	\rd, #(1 << 3)
+		bne	1002b
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #0x18]
+		tst	\rd, #(1 << 3)
+		bne	1001b
+		.endm
diff --git a/arch/arm/mach-netx/include/mach/dma.h b/arch/arm/mach-netx/include/mach/dma.h
new file mode 100644
index 000000000000..690b3ebc43ac
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/dma.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-netx/include/mach/dma.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define MAX_DMA_CHANNELS 0
+#define MAX_DMA_ADDRESS ~0
diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
new file mode 100644
index 000000000000..a1952a0feda6
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/entry-macro.S
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-netx/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Hilscher netX based platforms
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <mach/hardware.h>
+
+		.macro  disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	\base, #io_p2v(0x00100000)
+		add	\base, \base, #0x000ff000
+
+		ldr	\irqstat, [\base, #0]
+		clz	\irqnr, \irqstat
+		rsb     \irqnr, \irqnr, #31
+		cmp	\irqstat, #0
+		.endm
+
diff --git a/arch/arm/mach-netx/include/mach/eth.h b/arch/arm/mach-netx/include/mach/eth.h
new file mode 100644
index 000000000000..88af1ac28ead
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/eth.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-netx/include/mach/eth.h
+ *
+ * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef ASMARM_ARCH_ETH_H
+#define ASMARM_ARCH_ETH_H
+
+struct netxeth_platform_data {
+	unsigned int xcno;	/* number of xmac/xpec engine this eth uses */
+};
+
+#endif
diff --git a/arch/arm/mach-netx/include/mach/hardware.h b/arch/arm/mach-netx/include/mach/hardware.h
new file mode 100644
index 000000000000..517a2bd37842
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/hardware.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-netx/include/mach/hardware.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#define NETX_IO_PHYS	0x00100000
+#define NETX_IO_VIRT	0xe0000000
+#define NETX_IO_SIZE	0x00100000
+
+#define SRAM_INTERNAL_PHYS_0 0x00000
+#define SRAM_INTERNAL_PHYS_1 0x08000
+#define SRAM_INTERNAL_PHYS_2 0x10000
+#define SRAM_INTERNAL_PHYS_3 0x18000
+#define SRAM_INTERNAL_PHYS(no) ((no) * 0x8000)
+
+#define XPEC_MEM_SIZE 0x4000
+#define XMAC_MEM_SIZE 0x1000
+#define SRAM_MEM_SIZE 0x8000
+
+#define io_p2v(x) ((x) - NETX_IO_PHYS + NETX_IO_VIRT)
+#define io_v2p(x) ((x) - NETX_IO_VIRT + NETX_IO_PHYS)
+
+#endif
diff --git a/arch/arm/mach-netx/include/mach/io.h b/arch/arm/mach-netx/include/mach/io.h
new file mode 100644
index 000000000000..468b92a82585
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/io.h
@@ -0,0 +1,28 @@
+/*
+ *  arch/arm/mach-netx/include/mach/io.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)         ((void __iomem *)(a))
+#define __mem_pci(a)            (a)
+
+#endif
diff --git a/arch/arm/mach-netx/include/mach/irqs.h b/arch/arm/mach-netx/include/mach/irqs.h
new file mode 100644
index 000000000000..6ce914d54a30
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/irqs.h
@@ -0,0 +1,70 @@
+/*
+ * arch/arm/mach-netx/include/mach/irqs.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define NETX_IRQ_VIC_START   0
+#define NETX_IRQ_SOFTINT     0
+#define NETX_IRQ_TIMER0      1
+#define NETX_IRQ_TIMER1      2
+#define NETX_IRQ_TIMER2      3
+#define NETX_IRQ_SYSTIME_NS  4
+#define NETX_IRQ_SYSTIME_S   5
+#define NETX_IRQ_GPIO_15     6
+#define NETX_IRQ_WATCHDOG    7
+#define NETX_IRQ_UART0       8
+#define NETX_IRQ_UART1       9
+#define NETX_IRQ_UART2      10
+#define NETX_IRQ_USB        11
+#define NETX_IRQ_SPI        12
+#define NETX_IRQ_I2C        13
+#define NETX_IRQ_LCD        14
+#define NETX_IRQ_HIF        15
+#define NETX_IRQ_GPIO_0_14  16
+#define NETX_IRQ_XPEC0      17
+#define NETX_IRQ_XPEC1      18
+#define NETX_IRQ_XPEC2      19
+#define NETX_IRQ_XPEC3      20
+#define NETX_IRQ_XPEC(no)   (17 + (no))
+#define NETX_IRQ_MSYNC0     21
+#define NETX_IRQ_MSYNC1     22
+#define NETX_IRQ_MSYNC2     23
+#define NETX_IRQ_MSYNC3     24
+#define NETX_IRQ_IRQ_PHY    25
+#define NETX_IRQ_ISO_AREA   26
+/* int 27 is reserved */
+/* int 28 is reserved */
+#define NETX_IRQ_TIMER3     29
+#define NETX_IRQ_TIMER4     30
+/* int 31 is reserved */
+
+#define NETX_IRQS 32
+
+/* for multiplexed irqs on gpio 0..14 */
+#define NETX_IRQ_GPIO(x) (NETX_IRQS + (x))
+#define NETX_IRQ_GPIO_LAST NETX_IRQ_GPIO(14)
+
+/* Host interface interrupts */
+#define NETX_IRQ_HIF_CHAINED(x)    (NETX_IRQ_GPIO_LAST + 1 + (x))
+#define NETX_IRQ_HIF_PIO35         NETX_IRQ_HIF_CHAINED(0)
+#define NETX_IRQ_HIF_PIO36         NETX_IRQ_HIF_CHAINED(1)
+#define NETX_IRQ_HIF_PIO40         NETX_IRQ_HIF_CHAINED(2)
+#define NETX_IRQ_HIF_PIO47         NETX_IRQ_HIF_CHAINED(3)
+#define NETX_IRQ_HIF_PIO72         NETX_IRQ_HIF_CHAINED(4)
+#define NETX_IRQ_HIF_LAST          NETX_IRQ_HIF_CHAINED(4)
+
+#define NR_IRQS (NETX_IRQ_HIF_LAST + 1)
diff --git a/arch/arm/mach-netx/include/mach/memory.h b/arch/arm/mach-netx/include/mach/memory.h
new file mode 100644
index 000000000000..53745a1378de
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/memory.h
@@ -0,0 +1,36 @@
+/*
+ *  arch/arm/mach-netx/include/mach/memory.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x80000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)         __virt_to_phys(x)
+#define __bus_to_virt(x)         __phys_to_virt(x)
+
+#endif
+
diff --git a/arch/arm/mach-netx/include/mach/netx-regs.h b/arch/arm/mach-netx/include/mach/netx-regs.h
new file mode 100644
index 000000000000..5104a00d40f4
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/netx-regs.h
@@ -0,0 +1,410 @@
+/*
+ * arch/arm/mach-netx/include/mach/netx-regs.h
+ *
+ * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_NETX_REGS_H
+#define __ASM_ARCH_NETX_REGS_H
+
+/* offsets relative to the beginning of the io space */
+#define NETX_OFS_SYSTEM  0x00000
+#define NETX_OFS_MEMCR   0x00100
+#define NETX_OFS_DPMAS   0x03000
+#define NETX_OFS_GPIO    0x00800
+#define NETX_OFS_PIO     0x00900
+#define NETX_OFS_UART0   0x00a00
+#define NETX_OFS_UART1   0x00a40
+#define NETX_OFS_UART2   0x00a80
+#define NETX_OF_MIIMU    0x00b00
+#define NETX_OFS_SPI     0x00c00
+#define NETX_OFS_I2C     0x00d00
+#define NETX_OFS_SYSTIME 0x01100
+#define NETX_OFS_RTC     0x01200
+#define NETX_OFS_EXTBUS  0x03600
+#define NETX_OFS_LCD     0x04000
+#define NETX_OFS_USB     0x20000
+#define NETX_OFS_XMAC0   0x60000
+#define NETX_OFS_XMAC1   0x61000
+#define NETX_OFS_XMAC2   0x62000
+#define NETX_OFS_XMAC3   0x63000
+#define NETX_OFS_XMAC(no) (0x60000 + (no) * 0x1000)
+#define NETX_OFS_PFIFO   0x64000
+#define NETX_OFS_XPEC0   0x70000
+#define NETX_OFS_XPEC1   0x74000
+#define NETX_OFS_XPEC2   0x78000
+#define NETX_OFS_XPEC3   0x7c000
+#define NETX_OFS_XPEC(no) (0x70000 + (no) * 0x4000)
+#define NETX_OFS_VIC     0xff000
+
+/* physical addresses */
+#define NETX_PA_SYSTEM   (NETX_IO_PHYS + NETX_OFS_SYSTEM)
+#define NETX_PA_MEMCR    (NETX_IO_PHYS + NETX_OFS_MEMCR)
+#define NETX_PA_DPMAS    (NETX_IO_PHYS + NETX_OFS_DPMAS)
+#define NETX_PA_GPIO     (NETX_IO_PHYS + NETX_OFS_GPIO)
+#define NETX_PA_PIO      (NETX_IO_PHYS + NETX_OFS_PIO)
+#define NETX_PA_UART0    (NETX_IO_PHYS + NETX_OFS_UART0)
+#define NETX_PA_UART1    (NETX_IO_PHYS + NETX_OFS_UART1)
+#define NETX_PA_UART2    (NETX_IO_PHYS + NETX_OFS_UART2)
+#define NETX_PA_MIIMU    (NETX_IO_PHYS + NETX_OF_MIIMU)
+#define NETX_PA_SPI      (NETX_IO_PHYS + NETX_OFS_SPI)
+#define NETX_PA_I2C      (NETX_IO_PHYS + NETX_OFS_I2C)
+#define NETX_PA_SYSTIME  (NETX_IO_PHYS + NETX_OFS_SYSTIME)
+#define NETX_PA_RTC      (NETX_IO_PHYS + NETX_OFS_RTC)
+#define NETX_PA_EXTBUS   (NETX_IO_PHYS + NETX_OFS_EXTBUS)
+#define NETX_PA_LCD      (NETX_IO_PHYS + NETX_OFS_LCD)
+#define NETX_PA_USB      (NETX_IO_PHYS + NETX_OFS_USB)
+#define NETX_PA_XMAC0    (NETX_IO_PHYS + NETX_OFS_XMAC0)
+#define NETX_PA_XMAC1    (NETX_IO_PHYS + NETX_OFS_XMAC1)
+#define NETX_PA_XMAC2    (NETX_IO_PHYS + NETX_OFS_XMAC2)
+#define NETX_PA_XMAC3    (NETX_IO_PHYS + NETX_OFS_XMAC3)
+#define NETX_PA_XMAC(no) (NETX_IO_PHYS + NETX_OFS_XMAC(no))
+#define NETX_PA_PFIFO    (NETX_IO_PHYS + NETX_OFS_PFIFO)
+#define NETX_PA_XPEC0    (NETX_IO_PHYS + NETX_OFS_XPEC0)
+#define NETX_PA_XPEC1    (NETX_IO_PHYS + NETX_OFS_XPEC1)
+#define NETX_PA_XPEC2    (NETX_IO_PHYS + NETX_OFS_XPEC2)
+#define NETX_PA_XPEC3    (NETX_IO_PHYS + NETX_OFS_XPEC3)
+#define NETX_PA_XPEC(no) (NETX_IO_PHYS + NETX_OFS_XPEC(no))
+#define NETX_PA_VIC      (NETX_IO_PHYS + NETX_OFS_VIC)
+
+/* virual addresses */
+#define NETX_VA_SYSTEM   (NETX_IO_VIRT + NETX_OFS_SYSTEM)
+#define NETX_VA_MEMCR    (NETX_IO_VIRT + NETX_OFS_MEMCR)
+#define NETX_VA_DPMAS    (NETX_IO_VIRT + NETX_OFS_DPMAS)
+#define NETX_VA_GPIO     (NETX_IO_VIRT + NETX_OFS_GPIO)
+#define NETX_VA_PIO      (NETX_IO_VIRT + NETX_OFS_PIO)
+#define NETX_VA_UART0    (NETX_IO_VIRT + NETX_OFS_UART0)
+#define NETX_VA_UART1    (NETX_IO_VIRT + NETX_OFS_UART1)
+#define NETX_VA_UART2    (NETX_IO_VIRT + NETX_OFS_UART2)
+#define NETX_VA_MIIMU    (NETX_IO_VIRT + NETX_OF_MIIMU)
+#define NETX_VA_SPI      (NETX_IO_VIRT + NETX_OFS_SPI)
+#define NETX_VA_I2C      (NETX_IO_VIRT + NETX_OFS_I2C)
+#define NETX_VA_SYSTIME  (NETX_IO_VIRT + NETX_OFS_SYSTIME)
+#define NETX_VA_RTC      (NETX_IO_VIRT + NETX_OFS_RTC)
+#define NETX_VA_EXTBUS   (NETX_IO_VIRT + NETX_OFS_EXTBUS)
+#define NETX_VA_LCD      (NETX_IO_VIRT + NETX_OFS_LCD)
+#define NETX_VA_USB      (NETX_IO_VIRT + NETX_OFS_USB)
+#define NETX_VA_XMAC0    (NETX_IO_VIRT + NETX_OFS_XMAC0)
+#define NETX_VA_XMAC1    (NETX_IO_VIRT + NETX_OFS_XMAC1)
+#define NETX_VA_XMAC2    (NETX_IO_VIRT + NETX_OFS_XMAC2)
+#define NETX_VA_XMAC3    (NETX_IO_VIRT + NETX_OFS_XMAC3)
+#define NETX_VA_XMAC(no) (NETX_IO_VIRT + NETX_OFS_XMAC(no))
+#define NETX_VA_PFIFO    (NETX_IO_VIRT + NETX_OFS_PFIFO)
+#define NETX_VA_XPEC0    (NETX_IO_VIRT + NETX_OFS_XPEC0)
+#define NETX_VA_XPEC1    (NETX_IO_VIRT + NETX_OFS_XPEC1)
+#define NETX_VA_XPEC2    (NETX_IO_VIRT + NETX_OFS_XPEC2)
+#define NETX_VA_XPEC3    (NETX_IO_VIRT + NETX_OFS_XPEC3)
+#define NETX_VA_XPEC(no) (NETX_IO_VIRT + NETX_OFS_XPEC(no))
+#define NETX_VA_VIC      (NETX_IO_VIRT + NETX_OFS_VIC)
+
+/*********************************
+ * System functions              *
+ *********************************/
+
+/* Registers */
+#define NETX_SYSTEM_REG(ofs)            __io(NETX_VA_SYSTEM + (ofs))
+#define NETX_SYSTEM_BOO_SR          NETX_SYSTEM_REG(0x00)
+#define NETX_SYSTEM_IOC_CR          NETX_SYSTEM_REG(0x04)
+#define NETX_SYSTEM_IOC_MR          NETX_SYSTEM_REG(0x08)
+
+/* FIXME: Docs are not consistent */
+/* #define NETX_SYSTEM_RES_CR          NETX_SYSTEM_REG(0x08) */
+#define NETX_SYSTEM_RES_CR          NETX_SYSTEM_REG(0x0c)
+
+#define NETX_SYSTEM_PHY_CONTROL     NETX_SYSTEM_REG(0x10)
+#define NETX_SYSTEM_REV             NETX_SYSTEM_REG(0x34)
+#define NETX_SYSTEM_IOC_ACCESS_KEY  NETX_SYSTEM_REG(0x70)
+#define NETX_SYSTEM_WDG_TR          NETX_SYSTEM_REG(0x200)
+#define NETX_SYSTEM_WDG_CTR         NETX_SYSTEM_REG(0x204)
+#define NETX_SYSTEM_WDG_IRQ_TIMEOUT NETX_SYSTEM_REG(0x208)
+#define NETX_SYSTEM_WDG_RES_TIMEOUT NETX_SYSTEM_REG(0x20c)
+
+/* Bits */
+#define NETX_SYSTEM_RES_CR_RSTIN         (1<<0)
+#define NETX_SYSTEM_RES_CR_WDG_RES       (1<<1)
+#define NETX_SYSTEM_RES_CR_HOST_RES      (1<<2)
+#define NETX_SYSTEM_RES_CR_FIRMW_RES     (1<<3)
+#define NETX_SYSTEM_RES_CR_XPEC0_RES     (1<<4)
+#define NETX_SYSTEM_RES_CR_XPEC1_RES     (1<<5)
+#define NETX_SYSTEM_RES_CR_XPEC2_RES     (1<<6)
+#define NETX_SYSTEM_RES_CR_XPEC3_RES     (1<<7)
+#define NETX_SYSTEM_RES_CR_DIS_XPEC0_RES (1<<16)
+#define NETX_SYSTEM_RES_CR_DIS_XPEC1_RES (1<<17)
+#define NETX_SYSTEM_RES_CR_DIS_XPEC2_RES (1<<18)
+#define NETX_SYSTEM_RES_CR_DIS_XPEC3_RES (1<<19)
+#define NETX_SYSTEM_RES_CR_FIRMW_FLG0    (1<<20)
+#define NETX_SYSTEM_RES_CR_FIRMW_FLG1    (1<<21)
+#define NETX_SYSTEM_RES_CR_FIRMW_FLG2    (1<<22)
+#define NETX_SYSTEM_RES_CR_FIRMW_FLG3    (1<<23)
+#define NETX_SYSTEM_RES_CR_FIRMW_RES_EN  (1<<24)
+#define NETX_SYSTEM_RES_CR_RSTOUT        (1<<25)
+#define NETX_SYSTEM_RES_CR_EN_RSTOUT     (1<<26)
+
+#define PHY_CONTROL_RESET            (1<<31)
+#define PHY_CONTROL_SIM_BYP          (1<<30)
+#define PHY_CONTROL_CLK_XLATIN       (1<<29)
+#define PHY_CONTROL_PHY1_EN          (1<<21)
+#define PHY_CONTROL_PHY1_NP_MSG_CODE
+#define PHY_CONTROL_PHY1_AUTOMDIX    (1<<17)
+#define PHY_CONTROL_PHY1_FIXMODE     (1<<16)
+#define PHY_CONTROL_PHY1_MODE(mode)  (((mode) & 0x7) << 13)
+#define PHY_CONTROL_PHY0_EN          (1<<12)
+#define PHY_CONTROL_PHY0_NP_MSG_CODE
+#define PHY_CONTROL_PHY0_AUTOMDIX    (1<<8)
+#define PHY_CONTROL_PHY0_FIXMODE     (1<<7)
+#define PHY_CONTROL_PHY0_MODE(mode)  (((mode) & 0x7) << 4)
+#define PHY_CONTROL_PHY_ADDRESS(adr) ((adr) & 0xf)
+
+#define PHY_MODE_10BASE_T_HALF      0
+#define PHY_MODE_10BASE_T_FULL      1
+#define PHY_MODE_100BASE_TX_FX_FULL 2
+#define PHY_MODE_100BASE_TX_FX_HALF 3
+#define PHY_MODE_100BASE_TX_HALF    4
+#define PHY_MODE_REPEATER           5
+#define PHY_MODE_POWER_DOWN         6
+#define PHY_MODE_ALL                7
+
+/* Bits */
+#define VECT_CNTL_ENABLE               (1 << 5)
+
+/*******************************
+ * GPIO and timer module       *
+ *******************************/
+
+/* Registers */
+#define NETX_GPIO_REG(ofs)                     __io(NETX_VA_GPIO + (ofs))
+#define NETX_GPIO_CFG(gpio)                NETX_GPIO_REG(0x0  + ((gpio)<<2))
+#define NETX_GPIO_THRESHOLD_CAPTURE(gpio)  NETX_GPIO_REG(0x40 + ((gpio)<<2))
+#define NETX_GPIO_COUNTER_CTRL(counter)    NETX_GPIO_REG(0x80 + ((counter)<<2))
+#define NETX_GPIO_COUNTER_MAX(counter)     NETX_GPIO_REG(0x94 + ((counter)<<2))
+#define NETX_GPIO_COUNTER_CURRENT(counter) NETX_GPIO_REG(0xa8 + ((counter)<<2))
+#define NETX_GPIO_IRQ_ENABLE               NETX_GPIO_REG(0xbc)
+#define NETX_GPIO_IRQ_DISABLE              NETX_GPIO_REG(0xc0)
+#define NETX_GPIO_SYSTIME_NS_CMP           NETX_GPIO_REG(0xc4)
+#define NETX_GPIO_LINE                     NETX_GPIO_REG(0xc8)
+#define NETX_GPIO_IRQ                      NETX_GPIO_REG(0xd0)
+
+/* Bits */
+#define NETX_GPIO_CFG_IOCFG_GP_INPUT                 (0x0)
+#define NETX_GPIO_CFG_IOCFG_GP_OUTPUT                (0x1)
+#define NETX_GPIO_CFG_IOCFG_GP_UART                  (0x2)
+#define NETX_GPIO_CFG_INV                            (1<<2)
+#define NETX_GPIO_CFG_MODE_INPUT_READ                (0<<3)
+#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_CONT_RISING (1<<3)
+#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_ONCE_RISING (2<<3)
+#define NETX_GPIO_CFG_MODE_INPUT_CAPTURE_HIGH_LEVEL  (3<<3)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER0             (0<<5)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER1             (1<<5)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER2             (2<<5)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER3             (3<<5)
+#define NETX_GPIO_CFG_COUNT_REF_COUNTER4             (4<<5)
+#define NETX_GPIO_CFG_COUNT_REF_SYSTIME              (7<<5)
+
+#define NETX_GPIO_COUNTER_CTRL_RUN                   (1<<0)
+#define NETX_GPIO_COUNTER_CTRL_SYM                   (1<<1)
+#define NETX_GPIO_COUNTER_CTRL_ONCE                  (1<<2)
+#define NETX_GPIO_COUNTER_CTRL_IRQ_EN                (1<<3)
+#define NETX_GPIO_COUNTER_CTRL_CNT_EVENT             (1<<4)
+#define NETX_GPIO_COUNTER_CTRL_RST_EN                (1<<5)
+#define NETX_GPIO_COUNTER_CTRL_SEL_EVENT             (1<<6)
+#define NETX_GPIO_COUNTER_CTRL_GPIO_REF /* FIXME */
+
+#define GPIO_BIT(gpio)                     (1<<(gpio))
+#define COUNTER_BIT(counter)               ((1<<16)<<(counter))
+
+/*******************************
+ * PIO                         *
+ *******************************/
+
+/* Registers */
+#define NETX_PIO_REG(ofs)        __io(NETX_VA_PIO + (ofs))
+#define NETX_PIO_INPIO       NETX_PIO_REG(0x0)
+#define NETX_PIO_OUTPIO      NETX_PIO_REG(0x4)
+#define NETX_PIO_OEPIO       NETX_PIO_REG(0x8)
+
+/*******************************
+ * MII Unit                    *
+ *******************************/
+
+/* Registers */
+#define NETX_MIIMU           __io(NETX_VA_MIIMU)
+
+/* Bits */
+#define MIIMU_SNRDY        (1<<0)
+#define MIIMU_PREAMBLE     (1<<1)
+#define MIIMU_OPMODE_WRITE (1<<2)
+#define MIIMU_MDC_PERIOD   (1<<3)
+#define MIIMU_PHY_NRES     (1<<4)
+#define MIIMU_RTA          (1<<5)
+#define MIIMU_REGADDR(adr) (((adr) & 0x1f) << 6)
+#define MIIMU_PHYADDR(adr) (((adr) & 0x1f) << 11)
+#define MIIMU_DATA(data)   (((data) & 0xffff) << 16)
+
+/*******************************
+ * xmac / xpec                 *
+ *******************************/
+
+/* XPEC register offsets relative to NETX_VA_XPEC(no) */
+#define NETX_XPEC_R0_OFS           0x00
+#define NETX_XPEC_R1_OFS           0x04
+#define NETX_XPEC_R2_OFS           0x08
+#define NETX_XPEC_R3_OFS           0x0c
+#define NETX_XPEC_R4_OFS           0x10
+#define NETX_XPEC_R5_OFS           0x14
+#define NETX_XPEC_R6_OFS           0x18
+#define NETX_XPEC_R7_OFS           0x1c
+#define NETX_XPEC_RANGE01_OFS      0x20
+#define NETX_XPEC_RANGE23_OFS      0x24
+#define NETX_XPEC_RANGE45_OFS      0x28
+#define NETX_XPEC_RANGE67_OFS      0x2c
+#define NETX_XPEC_PC_OFS           0x48
+#define NETX_XPEC_TIMER_OFS(timer) (0x30 + ((timer)<<2))
+#define NETX_XPEC_IRQ_OFS          0x8c
+#define NETX_XPEC_SYSTIME_NS_OFS   0x90
+#define NETX_XPEC_FIFO_DATA_OFS    0x94
+#define NETX_XPEC_SYSTIME_S_OFS    0x98
+#define NETX_XPEC_ADC_OFS          0x9c
+#define NETX_XPEC_URX_COUNT_OFS    0x40
+#define NETX_XPEC_UTX_COUNT_OFS    0x44
+#define NETX_XPEC_PC_OFS           0x48
+#define NETX_XPEC_ZERO_OFS         0x4c
+#define NETX_XPEC_STATCFG_OFS      0x50
+#define NETX_XPEC_EC_MASKA_OFS     0x54
+#define NETX_XPEC_EC_MASKB_OFS     0x58
+#define NETX_XPEC_EC_MASK0_OFS     0x5c
+#define NETX_XPEC_EC_MASK8_OFS     0x7c
+#define NETX_XPEC_EC_MASK9_OFS     0x80
+#define NETX_XPEC_XPU_HOLD_PC_OFS  0x100
+#define NETX_XPEC_RAM_START_OFS    0x2000
+
+/* Bits */
+#define XPU_HOLD_PC (1<<0)
+
+/* XMAC register offsets relative to NETX_VA_XMAC(no) */
+#define NETX_XMAC_RPU_PROGRAM_START_OFS       0x000
+#define NETX_XMAC_RPU_PROGRAM_END_OFS         0x3ff
+#define NETX_XMAC_TPU_PROGRAM_START_OFS       0x400
+#define NETX_XMAC_TPU_PROGRAM_END_OFS         0x7ff
+#define NETX_XMAC_RPU_HOLD_PC_OFS             0xa00
+#define NETX_XMAC_TPU_HOLD_PC_OFS             0xa04
+#define NETX_XMAC_STATUS_SHARED0_OFS          0x840
+#define NETX_XMAC_CONFIG_SHARED0_OFS          0x844
+#define NETX_XMAC_STATUS_SHARED1_OFS          0x848
+#define NETX_XMAC_CONFIG_SHARED1_OFS          0x84c
+#define NETX_XMAC_STATUS_SHARED2_OFS          0x850
+#define NETX_XMAC_CONFIG_SHARED2_OFS          0x854
+#define NETX_XMAC_STATUS_SHARED3_OFS          0x858
+#define NETX_XMAC_CONFIG_SHARED3_OFS          0x85c
+
+#define RPU_HOLD_PC            (1<<15)
+#define TPU_HOLD_PC            (1<<15)
+
+/*******************************
+ * Pointer FIFO                *
+ *******************************/
+
+/* Registers */
+#define NETX_PFIFO_REG(ofs)               __io(NETX_VA_PFIFO + (ofs))
+#define NETX_PFIFO_BASE(pfifo)        NETX_PFIFO_REG(0x00 + ((pfifo)<<2))
+#define NETX_PFIFO_BORDER_BASE(pfifo) NETX_PFIFO_REG(0x80 + ((pfifo)<<2))
+#define NETX_PFIFO_RESET              NETX_PFIFO_REG(0x100)
+#define NETX_PFIFO_FULL               NETX_PFIFO_REG(0x104)
+#define NETX_PFIFO_EMPTY              NETX_PFIFO_REG(0x108)
+#define NETX_PFIFO_OVEFLOW            NETX_PFIFO_REG(0x10c)
+#define NETX_PFIFO_UNDERRUN           NETX_PFIFO_REG(0x110)
+#define NETX_PFIFO_FILL_LEVEL(pfifo)  NETX_PFIFO_REG(0x180 + ((pfifo)<<2))
+#define NETX_PFIFO_XPEC_ISR(xpec)     NETX_PFIFO_REG(0x400 + ((xpec) << 2))
+
+/*******************************
+ * Dual Port Memory            *
+ *******************************/
+
+/* Registers */
+#define NETX_DPMAS_REG(ofs)               __io(NETX_VA_DPMAS + (ofs))
+#define NETX_DPMAS_SYS_STAT           NETX_DPMAS_REG(0x4d8)
+#define NETX_DPMAS_INT_STAT           NETX_DPMAS_REG(0x4e0)
+#define NETX_DPMAS_INT_EN             NETX_DPMAS_REG(0x4f0)
+#define NETX_DPMAS_IF_CONF0           NETX_DPMAS_REG(0x608)
+#define NETX_DPMAS_IF_CONF1           NETX_DPMAS_REG(0x60c)
+#define NETX_DPMAS_EXT_CONFIG(cs)     NETX_DPMAS_REG(0x610 + 4 * (cs))
+#define NETX_DPMAS_IO_MODE0           NETX_DPMAS_REG(0x620) /* I/O 32..63 */
+#define NETX_DPMAS_DRV_EN0            NETX_DPMAS_REG(0x624)
+#define NETX_DPMAS_DATA0              NETX_DPMAS_REG(0x628)
+#define NETX_DPMAS_IO_MODE1           NETX_DPMAS_REG(0x630) /* I/O 64..84 */
+#define NETX_DPMAS_DRV_EN1            NETX_DPMAS_REG(0x634)
+#define NETX_DPMAS_DATA1              NETX_DPMAS_REG(0x638)
+
+/* Bits */
+#define NETX_DPMAS_INT_EN_GLB_EN         (1<<31)
+#define NETX_DPMAS_INT_EN_MEM_LCK        (1<<30)
+#define NETX_DPMAS_INT_EN_WDG            (1<<29)
+#define NETX_DPMAS_INT_EN_PIO72          (1<<28)
+#define NETX_DPMAS_INT_EN_PIO47          (1<<27)
+#define NETX_DPMAS_INT_EN_PIO40          (1<<26)
+#define NETX_DPMAS_INT_EN_PIO36          (1<<25)
+#define NETX_DPMAS_INT_EN_PIO35          (1<<24)
+
+#define NETX_DPMAS_IF_CONF0_HIF_DISABLED (0<<28)
+#define NETX_DPMAS_IF_CONF0_HIF_EXT_BUS  (1<<28)
+#define NETX_DPMAS_IF_CONF0_HIF_UP_8BIT  (2<<28)
+#define NETX_DPMAS_IF_CONF0_HIF_UP_16BIT (3<<28)
+#define NETX_DPMAS_IF_CONF0_HIF_IO       (4<<28)
+#define NETX_DPMAS_IF_CONF0_WAIT_DRV_PP  (1<<14)
+#define NETX_DPMAS_IF_CONF0_WAIT_DRV_OD  (2<<14)
+#define NETX_DPMAS_IF_CONF0_WAIT_DRV_TRI (3<<14)
+
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO35 (1<<26)
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO36 (1<<27)
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO40 (1<<28)
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO47 (1<<29)
+#define NETX_DPMAS_IF_CONF1_IRQ_POL_PIO72 (1<<30)
+
+#define NETX_EXT_CONFIG_TALEWIDTH(x) (((x) & 0x7) << 29)
+#define NETX_EXT_CONFIG_TADRHOLD(x)  (((x) & 0x7) << 26)
+#define NETX_EXT_CONFIG_TCSON(x)     (((x) & 0x7) << 23)
+#define NETX_EXT_CONFIG_TRDON(x)     (((x) & 0x7) << 20)
+#define NETX_EXT_CONFIG_TWRON(x)     (((x) & 0x7)  << 17)
+#define NETX_EXT_CONFIG_TWROFF(x)    (((x) & 0x1f) << 12)
+#define NETX_EXT_CONFIG_TRDWRCYC(x)  (((x) & 0x1f) << 7)
+#define NETX_EXT_CONFIG_WAIT_POL     (1<<6)
+#define NETX_EXT_CONFIG_WAIT_EN      (1<<5)
+#define NETX_EXT_CONFIG_NRD_MODE     (1<<4)
+#define NETX_EXT_CONFIG_DS_MODE      (1<<3)
+#define NETX_EXT_CONFIG_NWR_MODE     (1<<2)
+#define NETX_EXT_CONFIG_16BIT        (1<<1)
+#define NETX_EXT_CONFIG_CS_ENABLE    (1<<0)
+
+#define NETX_DPMAS_IO_MODE0_WRL   (1<<13)
+#define NETX_DPMAS_IO_MODE0_WAIT  (1<<14)
+#define NETX_DPMAS_IO_MODE0_READY (1<<15)
+#define NETX_DPMAS_IO_MODE0_CS0   (1<<19)
+#define NETX_DPMAS_IO_MODE0_EXTRD (1<<20)
+
+#define NETX_DPMAS_IO_MODE1_CS2           (1<<15)
+#define NETX_DPMAS_IO_MODE1_CS1           (1<<16)
+#define NETX_DPMAS_IO_MODE1_SAMPLE_NPOR   (0<<30)
+#define NETX_DPMAS_IO_MODE1_SAMPLE_100MHZ (1<<30)
+#define NETX_DPMAS_IO_MODE1_SAMPLE_NPIO36 (2<<30)
+#define NETX_DPMAS_IO_MODE1_SAMPLE_PIO36  (3<<30)
+
+/*******************************
+ * I2C                         *
+ *******************************/
+#define NETX_I2C_REG(ofs)	__io(NETX_VA_I2C, (ofs))
+#define NETX_I2C_CTRL	NETX_I2C_REG(0x0)
+#define NETX_I2C_DATA	NETX_I2C_REG(0x4)
+
+#endif /* __ASM_ARCH_NETX_REGS_H */
diff --git a/arch/arm/mach-netx/include/mach/param.h b/arch/arm/mach-netx/include/mach/param.h
new file mode 100644
index 000000000000..a771459206aa
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/param.h
@@ -0,0 +1,18 @@
+/*
+ *  arch/arm/mach-netx/include/mach/param.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-netx/include/mach/pfifo.h b/arch/arm/mach-netx/include/mach/pfifo.h
new file mode 100644
index 000000000000..42c59068f8d8
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/pfifo.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-netx/include/mach/pfifo.h
+ *
+ * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+
+#ifndef ASM_ARCH_PFIFO_H
+#define ASM_ARCH_PFIFO_H
+
+static inline int pfifo_push(int no, unsigned int pointer)
+{
+	writel(pointer, NETX_PFIFO_BASE(no));
+	return 0;
+}
+
+static inline unsigned int pfifo_pop(int no)
+{
+	return readl(NETX_PFIFO_BASE(no));
+}
+
+static inline int pfifo_fill_level(int no)
+{
+
+	return readl(NETX_PFIFO_FILL_LEVEL(no));
+}
+
+static inline int pfifo_full(int no)
+{
+	return readl(NETX_PFIFO_FULL) & (1<<no) ? 1 : 0;
+}
+
+static inline int pfifo_empty(int no)
+{
+	return readl(NETX_PFIFO_EMPTY) & (1<<no) ? 1 : 0;
+}
+
+int pfifo_request(unsigned int pfifo_mask);
+void pfifo_free(unsigned int pfifo_mask);
+
+#endif /* ASM_ARCH_PFIFO_H */
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
new file mode 100644
index 000000000000..27d8ef8e8e29
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/system.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-netx/include/mach/system.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+#include <mach/hardware.h>
+#include "netx-regs.h"
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	writel(NETX_SYSTEM_RES_CR_FIRMW_RES_EN | NETX_SYSTEM_RES_CR_FIRMW_RES,
+	       NETX_SYSTEM_RES_CR);
+}
+
+#endif
+
diff --git a/arch/arm/mach-netx/include/mach/timex.h b/arch/arm/mach-netx/include/mach/timex.h
new file mode 100644
index 000000000000..1120dd0ba393
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-netx/include/mach/timex.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE 100000000
diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h
new file mode 100644
index 000000000000..84f91284f612
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/uncompress.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/mach-netx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+
+#define REG(x) (*(volatile unsigned long *)(x))
+
+#define UART1_BASE 0x100a00
+#define UART2_BASE 0x100a80
+
+#define UART_DR 0x0
+
+#define UART_CR 0x14
+#define CR_UART_EN (1<<0)
+
+#define UART_FR 0x18
+#define FR_BUSY (1<<3)
+#define FR_TXFF (1<<5)
+
+static void putc(char c)
+{
+	unsigned long base;
+
+	if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
+		base = UART1_BASE;
+	else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
+		base = UART2_BASE;
+	else
+		return;
+
+	while (REG(base + UART_FR) & FR_TXFF);
+	REG(base + UART_DR) = c;
+}
+
+static inline void flush(void)
+{
+	unsigned long base;
+
+	if (REG(UART1_BASE + UART_CR) & CR_UART_EN)
+		base = UART1_BASE;
+	else if (REG(UART2_BASE + UART_CR) & CR_UART_EN)
+		base = UART2_BASE;
+	else
+		return;
+
+	while (REG(base + UART_FR) & FR_BUSY);
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-netx/include/mach/vmalloc.h b/arch/arm/mach-netx/include/mach/vmalloc.h
new file mode 100644
index 000000000000..25d5cc676e0f
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/vmalloc.h
@@ -0,0 +1,19 @@
+/*
+ *  arch/arm/mach-netx/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-netx/include/mach/xc.h b/arch/arm/mach-netx/include/mach/xc.h
new file mode 100644
index 000000000000..0c0011d4fc2d
--- /dev/null
+++ b/arch/arm/mach-netx/include/mach/xc.h
@@ -0,0 +1,42 @@
+/*
+ *  arch/arm/mach-netx/include/mach/xc.h
+ *
+ * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_XC_H
+#define __ASM_ARCH_XC_H
+
+struct xc {
+	int no;
+	unsigned int type;
+	unsigned int version;
+	void __iomem *xpec_base;
+	void __iomem *xmac_base;
+	void __iomem *sram_base;
+	int irq;
+	struct device *dev;
+};
+
+int xc_reset(struct xc *x);
+int xc_stop(struct xc* x);
+int xc_start(struct xc *x);
+int xc_running(struct xc *x);
+int xc_request_firmware(struct xc* x);
+struct xc* request_xc(int xcno, struct device *dev);
+void free_xc(struct xc *x);
+
+#endif /* __ASM_ARCH_XC_H */
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index e4a133d62846..c9b174bc8ccf 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -25,11 +25,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
 
 #include "generic.h"
 #include "fb.h"
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index 7e26c42d1ac7..15b54c62d60f 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -25,11 +25,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index 53e10a9849f9..1061c01ff679 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -25,11 +25,11 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/eth.h>
+#include <mach/netx-regs.h>
+#include <mach/eth.h>
 
 #include "generic.h"
 #include "fb.h"
diff --git a/arch/arm/mach-netx/pfifo.c b/arch/arm/mach-netx/pfifo.c
index 44dea61a9de4..19ae0a72bea3 100644
--- a/arch/arm/mach-netx/pfifo.c
+++ b/arch/arm/mach-netx/pfifo.c
@@ -22,9 +22,9 @@
 #include <linux/mutex.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/netx-regs.h>
-#include <asm/arch/pfifo.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
+#include <mach/pfifo.h>
 
 static DEFINE_MUTEX(pfifo_lock);
 
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index ea07b54afa59..ac8e5bfed691 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -22,10 +22,10 @@
 #include <linux/irq.h>
 #include <linux/clocksource.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach/time.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/netx-regs.h>
 
 /*
  * IRQ handler for the timer
diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c
index ca9c5b61283a..04c34e82fe6d 100644
--- a/arch/arm/mach-netx/xc.c
+++ b/arch/arm/mach-netx/xc.c
@@ -23,10 +23,10 @@
 #include <linux/mutex.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
-#include <asm/arch/netx-regs.h>
+#include <mach/hardware.h>
+#include <mach/netx-regs.h>
 
-#include <asm/arch/xc.h>
+#include <mach/xc.h>
 
 static DEFINE_MUTEX(xc_lock);
 
diff --git a/arch/arm/mach-ns9xxx/board-a9m9750dev.c b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
index a494b71c0195..a22a608a7aba 100644
--- a/arch/arm/mach-ns9xxx/board-a9m9750dev.c
+++ b/arch/arm/mach-ns9xxx/board-a9m9750dev.c
@@ -13,12 +13,12 @@
 #include <asm/mach/map.h>
 #include <asm/gpio.h>
 
-#include <asm/arch-ns9xxx/board.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
-#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
-#include <asm/arch-ns9xxx/regs-mem.h>
-#include <asm/arch-ns9xxx/regs-bbu.h>
-#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
+#include <mach/board.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-bbu.h>
+#include <mach/regs-board-a9m9750dev.h>
 
 #include "board-a9m9750dev.h"
 
diff --git a/arch/arm/mach-ns9xxx/clock.c b/arch/arm/mach-ns9xxx/clock.c
index f8639161068f..44ed20d4a388 100644
--- a/arch/arm/mach-ns9xxx/clock.c
+++ b/arch/arm/mach-ns9xxx/clock.c
@@ -14,8 +14,8 @@
 #include <linux/clk.h>
 #include <linux/string.h>
 #include <linux/platform_device.h>
+#include <linux/semaphore.h>
 
-#include <asm/semaphore.h>
 #include "clock.h"
 
 static LIST_HEAD(clocks);
diff --git a/arch/arm/mach-ns9xxx/gpio-ns9360.c b/arch/arm/mach-ns9xxx/gpio-ns9360.c
index cabfb879dda9..377330c1b250 100644
--- a/arch/arm/mach-ns9xxx/gpio-ns9360.c
+++ b/arch/arm/mach-ns9xxx/gpio-ns9360.c
@@ -14,8 +14,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 
-#include <asm/arch-ns9xxx/regs-bbu.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <mach/regs-bbu.h>
+#include <mach/processor-ns9360.h>
 
 #include "gpio-ns9360.h"
 
diff --git a/arch/arm/mach-ns9xxx/gpio.c b/arch/arm/mach-ns9xxx/gpio.c
index b3c963b0c8f5..804c30075960 100644
--- a/arch/arm/mach-ns9xxx/gpio.c
+++ b/arch/arm/mach-ns9xxx/gpio.c
@@ -13,9 +13,9 @@
 #include <linux/spinlock.h>
 #include <linux/module.h>
 
-#include <asm/arch-ns9xxx/gpio.h>
-#include <asm/arch-ns9xxx/processor.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <mach/gpio.h>
+#include <mach/processor.h>
+#include <mach/processor-ns9360.h>
 #include <asm/bug.h>
 #include <asm/types.h>
 #include <asm/bitops.h>
diff --git a/arch/arm/mach-ns9xxx/include/mach/board.h b/arch/arm/mach-ns9xxx/include/mach/board.h
new file mode 100644
index 000000000000..f7e9196eb9ab
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/board.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/board.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <asm/mach-types.h>
+
+#define board_is_a9m9750dev()	(0			\
+		|| machine_is_cc9p9360dev()		\
+		|| machine_is_cc9p9750dev()		\
+		)
+
+#define board_is_a9mvali()	(0			\
+		|| machine_is_cc9p9360val() 		\
+		|| machine_is_cc9p9750val()		\
+		)
+
+#define board_is_jscc9p9210()	(0			\
+		|| machine_is_cc9p9210js()		\
+		)
+
+#define board_is_jscc9p9215()	(0			\
+		|| machine_is_cc9p9215js()		\
+		)
+
+#define board_is_jscc9p9360()	(0			\
+		|| machine_is_cc9p9360js()		\
+		)
+
+#define board_is_uncbas()	(0			\
+		|| machine_is_cc7ucamry()		\
+		)
+
+#endif /* ifndef __ASM_ARCH_BOARD_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/debug-macro.S b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
new file mode 100644
index 000000000000..c9530fba00aa
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/debug-macro.S
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <mach/hardware.h>
+
+#include <mach/regs-board-a9m9750dev.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, =NS9XXX_CSxSTAT_PHYS(0)
+		ldrne	\rx, =io_p2v(NS9XXX_CSxSTAT_PHYS(0))
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-ns9xxx/include/mach/dma.h b/arch/arm/mach-ns9xxx/include/mach/dma.h
new file mode 100644
index 000000000000..3f50d8c9e5c7
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/dma.h
@@ -0,0 +1,14 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/dma.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#endif /* ifndef __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/entry-macro.S b/arch/arm/mach-ns9xxx/include/mach/entry-macro.S
new file mode 100644
index 000000000000..71ca0319b547
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/entry-macro.S
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/entry-macro.S
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <mach/regs-sys-common.h>
+
+		.macro	get_irqnr_preamble, base, tmp
+		ldr	\base, =SYS_ISRADDR
+		.endm
+
+		.macro	arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)]
+		cmp	\irqstat, #0
+		ldrne	\irqnr, [\base]
+		.endm
+
+		.macro	disable_fiq
+		.endm
diff --git a/arch/arm/mach-ns9xxx/include/mach/gpio.h b/arch/arm/mach-ns9xxx/include/mach/gpio.h
new file mode 100644
index 000000000000..5eb349032579
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/gpio.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/gpio.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+*/
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm/errno.h>
+
+int gpio_request(unsigned gpio, const char *label);
+
+void gpio_free(unsigned gpio);
+
+int ns9xxx_gpio_configure(unsigned gpio, int inv, int func);
+
+int gpio_direction_input(unsigned gpio);
+
+int gpio_direction_output(unsigned gpio, int value);
+
+int gpio_get_value(unsigned gpio);
+
+void gpio_set_value(unsigned gpio, int value);
+
+/*
+ * ns9xxx can use gpio pins to trigger an irq, but it's not generic
+ * enough to be supported by the gpio_to_irq/irq_to_gpio interface
+ */
+static inline int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+
+/* get the cansleep() stubs */
+#include <asm-generic/gpio.h>
+
+#endif /* ifndef __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/hardware.h b/arch/arm/mach-ns9xxx/include/mach/hardware.h
new file mode 100644
index 000000000000..6dbb2030f563
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/hardware.h
@@ -0,0 +1,79 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/hardware.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/memory.h>
+
+/*
+ * NetSilicon NS9xxx internal mapping:
+ *
+ * physical                <--> virtual
+ * 0x90000000 - 0x906fffff <--> 0xf9000000 - 0xf96fffff
+ * 0xa0100000 - 0xa0afffff <--> 0xfa100000 - 0xfaafffff
+ */
+#define io_p2v(x)	(0xf0000000 \
+			 + (((x) & 0xf0000000) >> 4) \
+			 + ((x) & 0x00ffffff))
+
+#define io_v2p(x)	((((x) & 0x0f000000) << 4) \
+			 + ((x) & 0x00ffffff))
+
+#define __REGSHIFT(mask)	((mask) & (-(mask)))
+
+#define __REGBIT(bit)		((u32)1 << (bit))
+#define __REGBITS(hbit, lbit)	((((u32)1 << ((hbit) - (lbit) + 1)) - 1) << (lbit))
+#define __REGVAL(mask, value)	(((value) * __REGSHIFT(mask)) & (mask))
+
+#ifndef __ASSEMBLY__
+
+#  define __REG(x)	((void __iomem __force *)io_p2v((x)))
+#  define __REG2(x, y)	((void __iomem __force *)(io_p2v((x)) + 4 * (y)))
+
+#  define __REGSET(var, field, value)					\
+	((var) = (((var) & ~((field) & ~(value))) | (value)))
+
+#  define REGSET(var, reg, field, value)				\
+	__REGSET(var, reg ## _ ## field, reg ## _ ## field ## _ ## value)
+
+#  define REGSET_IDX(var, reg, field, idx, value)			\
+	__REGSET(var, reg ## _ ## field((idx)), reg ## _ ## field ## _ ## value((idx)))
+
+#  define REGSETIM(var, reg, field, value)				\
+	__REGSET(var, reg ## _ ## field, __REGVAL(reg ## _ ## field, (value)))
+
+#  define REGSETIM_IDX(var, reg, field, idx, value)			\
+	__REGSET(var, reg ## _ ## field((idx)), __REGVAL(reg ## _ ## field((idx)), (value)))
+
+#  define __REGGET(var, field)						\
+	(((var) & (field)))
+
+#  define REGGET(var, reg, field)					\
+	 __REGGET(var, reg ## _ ## field)
+
+#  define REGGET_IDX(var, reg, field, idx)				\
+	 __REGGET(var, reg ## _ ## field((idx)))
+
+#  define REGGETIM(var, reg, field)					\
+	 __REGGET(var, reg ## _ ## field) / __REGSHIFT(reg ## _ ## field)
+
+#  define REGGETIM_IDX(var, reg, field, idx)				\
+	 __REGGET(var, reg ## _ ## field((idx))) /			\
+	 __REGSHIFT(reg ## _ ## field((idx)))
+
+#else
+
+#  define __REG(x)	io_p2v(x)
+#  define __REG2(x, y)	io_p2v((x) + 4 * (y))
+
+#endif
+
+#endif /* ifndef __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/io.h b/arch/arm/mach-ns9xxx/include/mach/io.h
new file mode 100644
index 000000000000..027bf649645a
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/io.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT  0xffffffff /* XXX */
+
+#define __io(a)         ((void __iomem *)(a))
+#define __mem_pci(a)    (a)
+#define __mem_isa(a)    (IO_BASE + (a))
+
+#endif /* ifndef __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/irqs.h b/arch/arm/mach-ns9xxx/include/mach/irqs.h
new file mode 100644
index 000000000000..13483949e210
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/irqs.h
@@ -0,0 +1,86 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/irqs.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/* NetSilicon 9360 */
+#define IRQ_NS9XXX_WATCHDOG	0
+#define IRQ_NS9XXX_AHBBUSERR	1
+#define IRQ_NS9360_BBUSAGG	2
+/* irq 3 is reserved for NS9360 */
+#define IRQ_NS9XXX_ETHRX	4
+#define IRQ_NS9XXX_ETHTX	5
+#define IRQ_NS9XXX_ETHPHY	6
+#define IRQ_NS9360_LCD		7
+#define IRQ_NS9360_SERBRX	8
+#define IRQ_NS9360_SERBTX	9
+#define IRQ_NS9360_SERARX	10
+#define IRQ_NS9360_SERATX	11
+#define IRQ_NS9360_SERCRX	12
+#define IRQ_NS9360_SERCTX	13
+#define IRQ_NS9360_I2C		14
+#define IRQ_NS9360_BBUSDMA	15
+#define IRQ_NS9360_TIMER0	16
+#define IRQ_NS9360_TIMER1	17
+#define IRQ_NS9360_TIMER2	18
+#define IRQ_NS9360_TIMER3	19
+#define IRQ_NS9360_TIMER4	20
+#define IRQ_NS9360_TIMER5	21
+#define IRQ_NS9360_TIMER6	22
+#define IRQ_NS9360_TIMER7	23
+#define IRQ_NS9360_RTC		24
+#define IRQ_NS9360_USBHOST	25
+#define IRQ_NS9360_USBDEVICE	26
+#define IRQ_NS9360_IEEE1284	27
+#define IRQ_NS9XXX_EXT0		28
+#define IRQ_NS9XXX_EXT1		29
+#define IRQ_NS9XXX_EXT2		30
+#define IRQ_NS9XXX_EXT3		31
+
+#define BBUS_IRQ(irq)	(32 + irq)
+
+#define IRQ_BBUS_DMA		BBUS_IRQ(0)
+#define IRQ_BBUS_SERBRX		BBUS_IRQ(2)
+#define IRQ_BBUS_SERBTX		BBUS_IRQ(3)
+#define IRQ_BBUS_SERARX		BBUS_IRQ(4)
+#define IRQ_BBUS_SERATX		BBUS_IRQ(5)
+#define IRQ_BBUS_SERCRX		BBUS_IRQ(6)
+#define IRQ_BBUS_SERCTX		BBUS_IRQ(7)
+#define IRQ_BBUS_SERDRX		BBUS_IRQ(8)
+#define IRQ_BBUS_SERDTX		BBUS_IRQ(9)
+#define IRQ_BBUS_I2C		BBUS_IRQ(10)
+#define IRQ_BBUS_1284		BBUS_IRQ(11)
+#define IRQ_BBUS_UTIL		BBUS_IRQ(12)
+#define IRQ_BBUS_RTC		BBUS_IRQ(13)
+#define IRQ_BBUS_USBHST		BBUS_IRQ(14)
+#define IRQ_BBUS_USBDEV		BBUS_IRQ(15)
+#define IRQ_BBUS_AHBDMA1	BBUS_IRQ(24)
+#define IRQ_BBUS_AHBDMA2	BBUS_IRQ(25)
+
+/*
+ * these Interrupts are specific for the a9m9750dev board.
+ * They are generated by an FPGA that interrupts the CPU on
+ * IRQ_NS9360_EXT2
+ */
+#define FPGA_IRQ(irq)	(64 + irq)
+
+#define IRQ_FPGA_UARTA		FPGA_IRQ(0)
+#define IRQ_FPGA_UARTB		FPGA_IRQ(1)
+#define IRQ_FPGA_UARTC		FPGA_IRQ(2)
+#define IRQ_FPGA_UARTD		FPGA_IRQ(3)
+#define IRQ_FPGA_TOUCH		FPGA_IRQ(4)
+#define IRQ_FPGA_CF		FPGA_IRQ(5)
+#define IRQ_FPGA_CAN0		FPGA_IRQ(6)
+#define IRQ_FPGA_CAN1		FPGA_IRQ(7)
+
+#define NR_IRQS	72
+
+#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/memory.h b/arch/arm/mach-ns9xxx/include/mach/memory.h
new file mode 100644
index 000000000000..649ee6235b94
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/memory.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/memory.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+*/
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/* x in [0..3] */
+#define NS9XXX_CSxSTAT_PHYS(x)	UL(((x) + 4) << 28)
+
+#define NS9XXX_CS0STAT_LENGTH	UL(0x1000)
+#define NS9XXX_CS1STAT_LENGTH	UL(0x1000)
+#define NS9XXX_CS2STAT_LENGTH	UL(0x1000)
+#define NS9XXX_CS3STAT_LENGTH	UL(0x1000)
+
+#define PHYS_OFFSET	UL(0x00000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-ns9xxx/include/mach/module.h b/arch/arm/mach-ns9xxx/include/mach/module.h
new file mode 100644
index 000000000000..f851a6b7da6c
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/module.h
@@ -0,0 +1,60 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/module.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_MODULE_H
+#define __ASM_ARCH_MODULE_H
+
+#include <asm/mach-types.h>
+
+#define module_is_cc7ucamry()	(0			\
+		|| machine_is_cc7ucamry()		\
+		)
+
+#define module_is_cc9c()	(0			\
+		|| machine_is_cc9c()			\
+		)
+
+#define module_is_cc9p9210()	(0			\
+		|| machine_is_cc9p9210()		\
+		|| machine_is_cc9p9210js()		\
+		)
+
+#define module_is_cc9p9215()	(0			\
+		|| machine_is_cc9p9215()		\
+		|| machine_is_cc9p9215js()		\
+		)
+
+#define module_is_cc9p9360()	(0			\
+		|| machine_is_a9m9360()			\
+		|| machine_is_cc9p9360dev()		\
+		|| machine_is_cc9p9360js()		\
+		|| machine_is_cc9p9360val()		\
+		)
+
+#define module_is_cc9p9750()	(0			\
+		|| machine_is_a9m9750()			\
+		|| machine_is_cc9p9750dev()		\
+		|| machine_is_cc9p9750js()		\
+		|| machine_is_cc9p9750val()		\
+		)
+
+#define module_is_ccw9c()	(0			\
+		|| machine_is_ccw9c()			\
+		)
+
+#define module_is_inc20otter()	(0			\
+		|| machine_is_inc20otter()		\
+		)
+
+#define module_is_otter()	(0			\
+		|| machine_is_otter()			\
+		)
+
+#endif /* ifndef __ASM_ARCH_MODULE_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h b/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
new file mode 100644
index 000000000000..f41deda5129e
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/processor-ns9360.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_PROCESSORNS9360_H
+#define __ASM_ARCH_PROCESSORNS9360_H
+
+#include <linux/init.h>
+
+void ns9360_reset(char mode);
+
+unsigned long ns9360_systemclock(void) __attribute__((const));
+
+static inline unsigned long ns9360_cpuclock(void) __attribute__((const));
+static inline unsigned long ns9360_cpuclock(void)
+{
+	return ns9360_systemclock() / 2;
+}
+
+void __init ns9360_map_io(void);
+
+extern struct sys_timer ns9360_timer;
+
+int ns9360_gpio_configure(unsigned gpio, int inv, int func);
+
+#endif /* ifndef __ASM_ARCH_PROCESSORNS9360_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/processor.h b/arch/arm/mach-ns9xxx/include/mach/processor.h
new file mode 100644
index 000000000000..9f77f746a386
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/processor.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/processor.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_PROCESSOR_H
+#define __ASM_ARCH_PROCESSOR_H
+
+#include <mach/module.h>
+
+#define processor_is_ns9210()	(0			\
+		|| module_is_cc7ucamry()		\
+		|| module_is_cc9p9210()			\
+		|| module_is_inc20otter()		\
+		|| module_is_otter()			\
+		)
+
+#define processor_is_ns9215()	(0			\
+		|| module_is_cc9p9215()			\
+		)
+
+#define processor_is_ns9360()	(0			\
+		|| module_is_cc9p9360()			\
+		|| module_is_cc9c()			\
+		|| module_is_ccw9c()			\
+		)
+
+#define processor_is_ns9750()	(0			\
+		|| module_is_cc9p9750()			\
+		)
+
+#define processor_is_ns921x()	(0			\
+		|| processor_is_ns9210()		\
+		|| processor_is_ns9215()		\
+		)
+
+#endif /* ifndef __ASM_ARCH_PROCESSOR_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h b/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
new file mode 100644
index 000000000000..af227c058fb9
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-bbu.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSBBU_H
+#define __ASM_ARCH_REGSBBU_H
+
+#include <mach/hardware.h>
+
+/* BBus Utility */
+
+/* GPIO Configuration Registers block 1 */
+/* NOTE: the HRM starts counting at 1 for the GPIO registers, here the start is
+ * at 0 for each block.  That is, BBU_GCONFb1(0) is GPIO Configuration Register
+ * #1, BBU_GCONFb2(0) is GPIO Configuration Register #8. */
+#define BBU_GCONFb1(x)	__REG2(0x90600010, (x))
+#define BBU_GCONFb2(x)	__REG2(0x90600100, (x))
+
+#define BBU_GCONFx_DIR(m)	__REGBIT(3 + (((m) & 7) << 2))
+#define BBU_GCONFx_DIR_INPUT(m)	__REGVAL(BBU_GCONFx_DIR(m), 0)
+#define BBU_GCONFx_DIR_OUTPUT(m)	__REGVAL(BBU_GCONFx_DIR(m), 1)
+#define BBU_GCONFx_INV(m)	__REGBIT(2 + (((m) & 7) << 2))
+#define BBU_GCONFx_INV_NO(m)		__REGVAL(BBU_GCONFx_INV(m), 0)
+#define BBU_GCONFx_INV_YES(m)		__REGVAL(BBU_GCONFx_INV(m), 1)
+#define BBU_GCONFx_FUNC(m)	__REGBITS(1 + (((m) & 7) << 2), ((m) & 7) << 2)
+#define BBU_GCONFx_FUNC_0(m)		__REGVAL(BBU_GCONFx_FUNC(m), 0)
+#define BBU_GCONFx_FUNC_1(m)		__REGVAL(BBU_GCONFx_FUNC(m), 1)
+#define BBU_GCONFx_FUNC_2(m)		__REGVAL(BBU_GCONFx_FUNC(m), 2)
+#define BBU_GCONFx_FUNC_3(m)		__REGVAL(BBU_GCONFx_FUNC(m), 3)
+
+#define BBU_GCTRL1	__REG(0x90600030)
+#define BBU_GCTRL2	__REG(0x90600034)
+#define BBU_GCTRL3	__REG(0x90600120)
+
+#define BBU_GSTAT1	__REG(0x90600040)
+#define BBU_GSTAT2	__REG(0x90600044)
+#define BBU_GSTAT3	__REG(0x90600130)
+
+#endif /* ifndef __ASM_ARCH_REGSBBU_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h b/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
new file mode 100644
index 000000000000..cd1593693f56
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-board-a9m9750dev.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSBOARDA9M9750_H
+#define __ASM_ARCH_REGSBOARDA9M9750_H
+
+#include <mach/hardware.h>
+
+#define FPGA_UARTA_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0))
+#define FPGA_UARTB_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x08)
+#define FPGA_UARTC_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x10)
+#define FPGA_UARTD_BASE	io_p2v(NS9XXX_CSxSTAT_PHYS(0) + 0x18)
+
+#define FPGA_IER	__REG(NS9XXX_CSxSTAT_PHYS(0) + 0x50)
+#define FPGA_ISR	__REG(NS9XXX_CSxSTAT_PHYS(0) + 0x60)
+
+#endif /* ifndef __ASM_ARCH_REGSBOARDA9M9750_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-mem.h b/arch/arm/mach-ns9xxx/include/mach/regs-mem.h
new file mode 100644
index 000000000000..f1625bf8cdce
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-mem.h
@@ -0,0 +1,135 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-mem.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSMEM_H
+#define __ASM_ARCH_REGSMEM_H
+
+#include <mach/hardware.h>
+
+/* Memory Module */
+
+/* Control register */
+#define MEM_CTRL	__REG(0xa0700000)
+
+/* Status register */
+#define MEM_STAT	__REG(0xa0700004)
+
+/* Configuration register */
+#define MEM_CONF	__REG(0xa0700008)
+
+/* Dynamic Memory Control register */
+#define MEM_DMCTRL	__REG(0xa0700020)
+
+/* Dynamic Memory Refresh Timer */
+#define MEM_DMRT	__REG(0xa0700024)
+
+/* Dynamic Memory Read Configuration register */
+#define MEM_DMRC	__REG(0xa0700028)
+
+/* Dynamic Memory Precharge Command Period (tRP) */
+#define MEM_DMPCP	__REG(0xa0700030)
+
+/* Dynamic Memory Active to Precharge Command Period (tRAS) */
+#define MEM_DMAPCP	__REG(0xa0700034)
+
+/* Dynamic Memory Self-Refresh Exit Time (tSREX) */
+#define MEM_DMSRET	__REG(0xa0700038)
+
+/* Dynamic Memory Last Data Out to Active Time (tAPR) */
+#define MEM_DMLDOAT	__REG(0xa070003c)
+
+/* Dynamic Memory Data-in to Active Command Time (tDAL or TAPW) */
+#define MEM_DMDIACT	__REG(0xa0700040)
+
+/* Dynamic Memory Write Recovery Time (tWR, tDPL, tRWL, tRDL) */
+#define MEM_DMWRT	__REG(0xa0700044)
+
+/* Dynamic Memory Active to Active Command Period (tRC) */
+#define MEM_DMAACP	__REG(0xa0700048)
+
+/* Dynamic Memory Auto Refresh Period, and Auto Refresh to Active Command Period (tRFC) */
+#define MEM_DMARP	__REG(0xa070004c)
+
+/* Dynamic Memory Exit Self-Refresh to Active Command (tXSR) */
+#define MEM_DMESRAC	__REG(0xa0700050)
+
+/* Dynamic Memory Active Bank A to Active B Time (tRRD) */
+#define MEM_DMABAABT	__REG(0xa0700054)
+
+/* Dynamic Memory Load Mode register to Active Command Time (tMRD) */
+#define MEM_DMLMACT	__REG(0xa0700058)
+
+/* Static Memory Extended Wait */
+#define MEM_SMEW	__REG(0xa0700080)
+
+/* Dynamic Memory Configuration Register x */
+#define MEM_DMCONF(x) 	__REG2(0xa0700100, (x) << 3)
+
+/* Dynamic Memory RAS and CAS Delay x */
+#define MEM_DMRCD(x)	__REG2(0xa0700104, (x) << 3)
+
+/* Static Memory Configuration Register x */
+#define MEM_SMC(x)	__REG2(0xa0700200, (x) << 3)
+
+/* Static Memory Configuration Register x: Write protect */
+#define MEM_SMC_PSMC		__REGBIT(20)
+#define MEM_SMC_PSMC_OFF		__REGVAL(MEM_SMC_PSMC, 0)
+#define MEM_SMC_PSMC_ON			__REGVAL(MEM_SMC_PSMC, 1)
+
+/* Static Memory Configuration Register x: Buffer enable */
+#define MEM_SMC_BSMC		__REGBIT(19)
+#define MEM_SMC_BSMC_OFF		__REGVAL(MEM_SMC_BSMC, 0)
+#define MEM_SMC_BSMC_ON			__REGVAL(MEM_SMC_BSMC, 1)
+
+/* Static Memory Configuration Register x: Extended Wait */
+#define MEM_SMC_EW		__REGBIT(8)
+#define MEM_SMC_EW_OFF			__REGVAL(MEM_SMC_EW, 0)
+#define MEM_SMC_EW_ON			__REGVAL(MEM_SMC_EW, 1)
+
+/* Static Memory Configuration Register x: Byte lane state */
+#define MEM_SMC_PB		__REGBIT(7)
+#define MEM_SMC_PB_0			__REGVAL(MEM_SMC_PB, 0)
+#define MEM_SMC_PB_1			__REGVAL(MEM_SMC_PB, 1)
+
+/* Static Memory Configuration Register x: Chip select polarity */
+#define MEM_SMC_PC		__REGBIT(6)
+#define MEM_SMC_PC_AL			__REGVAL(MEM_SMC_PC, 0)
+#define MEM_SMC_PC_AH			__REGVAL(MEM_SMC_PC, 1)
+
+/* static memory configuration register x: page mode*/
+#define MEM_SMC_PM		__REGBIT(3)
+#define MEM_SMC_PM_DIS			__REGVAL(MEM_SMC_PM, 0)
+#define MEM_SMC_PM_ASYNC		__REGVAL(MEM_SMC_PM, 1)
+
+/* static memory configuration register x: Memory width */
+#define MEM_SMC_MW		__REGBITS(1, 0)
+#define MEM_SMC_MW_8			__REGVAL(MEM_SMC_MW, 0)
+#define MEM_SMC_MW_16			__REGVAL(MEM_SMC_MW, 1)
+#define MEM_SMC_MW_32			__REGVAL(MEM_SMC_MW, 2)
+
+/* Static Memory Write Enable Delay x */
+#define MEM_SMWED(x)	__REG2(0xa0700204, (x) << 3)
+
+/* Static Memory Output Enable Delay x */
+#define MEM_SMOED(x)	__REG2(0xa0700208, (x) << 3)
+
+/* Static Memory Read Delay x */
+#define MEM_SMRD(x)	__REG2(0xa070020c, (x) << 3)
+
+/* Static Memory Page Mode Read Delay 0 */
+#define MEM_SMPMRD(x)	__REG2(0xa0700210, (x) << 3)
+
+/* Static Memory Write Delay */
+#define MEM_SMWD(x)	__REG2(0xa0700214, (x) << 3)
+
+/* Static Memory Turn Round Delay x */
+#define MEM_SWT(x)	__REG2(0xa0700218, (x) << 3)
+
+#endif /* ifndef __ASM_ARCH_REGSMEM_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h b/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
new file mode 100644
index 000000000000..14f91dfd5736
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-sys-common.h
+ *
+ * Copyright (C) 2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_REGSSYSCOMMON_H
+#define __ASM_ARCH_REGSSYSCOMMON_H
+#include <mach/hardware.h>
+
+/* Interrupt Vector Address Register Level x */
+#define SYS_IVA(x)	__REG2(0xa09000c4, (x))
+
+/* Interrupt Configuration registers */
+#define SYS_IC(x)	__REG2(0xa0900144, (x))
+
+/* ISRADDR */
+#define SYS_ISRADDR     __REG(0xa0900164)
+
+/* Interrupt Status Active */
+#define SYS_ISA		__REG(0xa0900168)
+
+/* Interrupt Status Raw */
+#define SYS_ISR		__REG(0xa090016c)
+
+#endif /* ifndef __ASM_ARCH_REGSSYSCOMMON_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h b/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
new file mode 100644
index 000000000000..8ff254d9901c
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
@@ -0,0 +1,148 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/regs-sys-ns9360.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_REGSSYSNS9360_H
+#define __ASM_ARCH_REGSSYSNS9360_H
+
+#include <mach/hardware.h>
+
+/* System Control Module */
+
+/* AHB Arbiter Gen Configuration */
+#define SYS_AHBAGENCONF	__REG(0xa0900000)
+
+/* BRC */
+#define SYS_BRC(x)	__REG2(0xa0900004, (x))
+
+/* Timer x Reload Count register */
+#define SYS_TRC(x)	__REG2(0xa0900044, (x))
+
+/* Timer x Read register */
+#define SYS_TR(x)	__REG2(0xa0900084, (x))
+
+/* Timer Interrupt Status register */
+#define SYS_TIS		__REG(0xa0900170)
+
+/* PLL Configuration register */
+#define SYS_PLL		__REG(0xa0900188)
+
+/* PLL FS status */
+#define SYS_PLL_FS		__REGBITS(24, 23)
+
+/* PLL ND status */
+#define SYS_PLL_ND		__REGBITS(20, 16)
+
+/* PLL Configuration register: PLL SW change */
+#define SYS_PLL_SWC		__REGBIT(15)
+#define SYS_PLL_SWC_NO			__REGVAL(SYS_PLL_SWC, 0)
+#define SYS_PLL_SWC_YES			__REGVAL(SYS_PLL_SWC, 1)
+
+/* Timer x Control register */
+#define SYS_TC(x)	__REG2(0xa0900190, (x))
+
+/* Timer x Control register: Timer enable */
+#define SYS_TCx_TEN		__REGBIT(15)
+#define SYS_TCx_TEN_DIS			__REGVAL(SYS_TCx_TEN, 0)
+#define SYS_TCx_TEN_EN			__REGVAL(SYS_TCx_TEN, 1)
+
+/* Timer x Control register: CPU debug mode */
+#define SYS_TCx_TDBG		__REGBIT(10)
+#define SYS_TCx_TDBG_CONT		__REGVAL(SYS_TCx_TDBG, 0)
+#define SYS_TCx_TDBG_STOP		__REGVAL(SYS_TCx_TDBG, 1)
+
+/* Timer x Control register: Interrupt clear */
+#define SYS_TCx_INTC		__REGBIT(9)
+#define SYS_TCx_INTC_UNSET		__REGVAL(SYS_TCx_INTC, 0)
+#define SYS_TCx_INTC_SET		__REGVAL(SYS_TCx_INTC, 1)
+
+/* Timer x Control register: Timer clock select */
+#define SYS_TCx_TLCS		__REGBITS(8, 6)
+#define SYS_TCx_TLCS_CPU		__REGVAL(SYS_TCx_TLCS, 0)	/* CPU clock */
+#define SYS_TCx_TLCS_DIV2		__REGVAL(SYS_TCx_TLCS, 1)	/* CPU clock / 2 */
+#define SYS_TCx_TLCS_DIV4		__REGVAL(SYS_TCx_TLCS, 2)	/* CPU clock / 4 */
+#define SYS_TCx_TLCS_DIV8		__REGVAL(SYS_TCx_TLCS, 3)	/* CPU clock / 8 */
+#define SYS_TCx_TLCS_DIV16		__REGVAL(SYS_TCx_TLCS, 4)	/* CPU clock / 16 */
+#define SYS_TCx_TLCS_DIV32		__REGVAL(SYS_TCx_TLCS, 5)	/* CPU clock / 32 */
+#define SYS_TCx_TLCS_DIV64		__REGVAL(SYS_TCx_TLCS, 6)	/* CPU clock / 64 */
+#define SYS_TCx_TLCS_EXT		__REGVAL(SYS_TCx_TLCS, 7)
+
+/* Timer x Control register: Timer mode */
+#define SYS_TCx_TM		__REGBITS(5, 4)
+#define SYS_TCx_TM_IEE			__REGVAL(SYS_TCx_TM, 0)		/* Internal timer or external event */
+#define SYS_TCx_TM_ELL			__REGVAL(SYS_TCx_TM, 1)		/* External low-level, gated timer */
+#define SYS_TCx_TM_EHL			__REGVAL(SYS_TCx_TM, 2)		/* External high-level, gated timer */
+#define SYS_TCx_TM_CONCAT		__REGVAL(SYS_TCx_TM, 3)		/* Concatenate the lower timer. */
+
+/* Timer x Control register: Interrupt select */
+#define SYS_TCx_INTS		__REGBIT(3)
+#define SYS_TCx_INTS_DIS		__REGVAL(SYS_TCx_INTS, 0)
+#define SYS_TCx_INTS_EN			__REGVAL(SYS_TCx_INTS, 1)
+
+/* Timer x Control register: Up/down select */
+#define SYS_TCx_UDS		__REGBIT(2)
+#define SYS_TCx_UDS_UP			__REGVAL(SYS_TCx_UDS, 0)
+#define SYS_TCx_UDS_DOWN		__REGVAL(SYS_TCx_UDS, 1)
+
+/* Timer x Control register: 32- or 16-bit timer */
+#define SYS_TCx_TSZ		__REGBIT(1)
+#define SYS_TCx_TSZ_16			__REGVAL(SYS_TCx_TSZ, 0)
+#define SYS_TCx_TSZ_32			__REGVAL(SYS_TCx_TSZ, 1)
+
+/* Timer x Control register: Reload enable */
+#define SYS_TCx_REN		__REGBIT(0)
+#define SYS_TCx_REN_DIS			__REGVAL(SYS_TCx_REN, 0)
+#define SYS_TCx_REN_EN			__REGVAL(SYS_TCx_REN, 1)
+
+/* System Memory Chip Select x Dynamic Memory Base */
+#define SYS_SMCSDMB(x)	__REG2(0xa09001d0, (x) << 1)
+
+/* System Memory Chip Select x Dynamic Memory Mask */
+#define SYS_SMCSDMM(x)	__REG2(0xa09001d4, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Base */
+#define SYS_SMCSSMB(x)	__REG2(0xa09001f0, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Base: Chip select x base */
+#define SYS_SMCSSMB_CSxB	__REGBITS(31, 12)
+
+/* System Memory Chip Select x Static Memory Mask */
+#define SYS_SMCSSMM(x)	__REG2(0xa09001f4, (x) << 1)
+
+/* System Memory Chip Select x Static Memory Mask: Chip select x mask */
+#define SYS_SMCSSMM_CSxM	__REGBITS(31, 12)
+
+/* System Memory Chip Select x Static Memory Mask: Chip select x enable */
+#define SYS_SMCSSMM_CSEx	__REGBIT(0)
+#define SYS_SMCSSMM_CSEx_DIS		__REGVAL(SYS_SMCSSMM_CSEx, 0)
+#define SYS_SMCSSMM_CSEx_EN		__REGVAL(SYS_SMCSSMM_CSEx, 1)
+
+/* General purpose, user-defined ID register */
+#define SYS_GENID	__REG(0xa0900210)
+
+/* External Interrupt x Control register */
+#define SYS_EIC(x)	__REG2(0xa0900214, (x))
+
+/* External Interrupt x Control register: Status */
+#define SYS_EIC_STS		__REGBIT(3)
+
+/* External Interrupt x Control register: Clear */
+#define SYS_EIC_CLR		__REGBIT(2)
+
+/* External Interrupt x Control register: Polarity */
+#define SYS_EIC_PLTY		__REGBIT(1)
+#define SYS_EIC_PLTY_AH			__REGVAL(SYS_EIC_PLTY, 0)
+#define SYS_EIC_PLTY_AL			__REGVAL(SYS_EIC_PLTY, 1)
+
+/* External Interrupt x Control register: Level edge */
+#define SYS_EIC_LVEDG		__REGBIT(0)
+#define SYS_EIC_LVEDG_LEVEL		__REGVAL(SYS_EIC_LVEDG, 0)
+#define SYS_EIC_LVEDG_EDGE		__REGVAL(SYS_EIC_LVEDG, 1)
+
+#endif /* ifndef __ASM_ARCH_REGSSYSNS9360_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/system.h b/arch/arm/mach-ns9xxx/include/mach/system.h
new file mode 100644
index 000000000000..e2068c57415f
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/system.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/system.h
+ *
+ * Copyright (C) 2006,2007 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/proc-fns.h>
+#include <mach/processor.h>
+#include <mach/processor-ns9360.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+#ifdef CONFIG_PROCESSOR_NS9360
+	if (processor_is_ns9360())
+		ns9360_reset(mode);
+	else
+#endif
+		BUG();
+
+	BUG();
+}
+
+#endif /* ifndef __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/timex.h b/arch/arm/mach-ns9xxx/include/mach/timex.h
new file mode 100644
index 000000000000..734a8d8bd578
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/timex.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/timex.h
+ *
+ * Copyright (C) 2005-2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/*
+ * value for CLOCK_TICK_RATE stolen from arch/arm/mach-s3c2410/include/mach/timex.h.
+ * See there for an explanation.
+ */
+#define CLOCK_TICK_RATE         12000000
+
+#endif /* ifndef __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/uncompress.h b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
new file mode 100644
index 000000000000..5dbc3c5167c8
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/uncompress.h
@@ -0,0 +1,164 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/uncompress.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/io.h>
+
+#define __REG(x)	((void __iomem __force *)(x))
+
+static void putc_dummy(char c, void __iomem *base)
+{
+	/* nothing */
+}
+
+static void putc_ns9360(char c, void __iomem *base)
+{
+	static int t = 0x10000;
+	do {
+		if (t)
+			--t;
+
+		if (__raw_readl(base + 8) & (1 << 3)) {
+			__raw_writeb(c, base + 16);
+			t = 0x10000;
+			break;
+		}
+	} while (t);
+}
+
+static void putc_a9m9750dev(char c, void __iomem *base)
+{
+	static int t = 0x10000;
+	do {
+		if (t)
+			--t;
+
+		if (__raw_readb(base + 5) & (1 << 5)) {
+			__raw_writeb(c, base);
+			t = 0x10000;
+			break;
+		}
+	} while (t);
+
+}
+
+static void putc_ns921x(char c, void __iomem *base)
+{
+	static int t = 0x10000;
+	do {
+		if (t)
+			--t;
+
+		if (!(__raw_readl(base) & (1 << 11))) {
+			__raw_writeb(c, base + 0x0028);
+			t = 0x10000;
+			break;
+		}
+	} while (t);
+}
+
+#define MSCS __REG(0xA0900184)
+
+#define NS9360_UARTA	__REG(0x90200040)
+#define NS9360_UARTB	__REG(0x90200000)
+#define NS9360_UARTC	__REG(0x90300000)
+#define NS9360_UARTD	__REG(0x90300040)
+
+#define NS9360_UART_ENABLED(base)					\
+		(__raw_readl(NS9360_UARTA) & (1 << 31))
+
+#define A9M9750DEV_UARTA	__REG(0x40000000)
+
+#define NS921XSYS_CLOCK	__REG(0xa090017c)
+#define NS921X_UARTA	__REG(0x90010000)
+#define NS921X_UARTB	__REG(0x90018000)
+#define NS921X_UARTC	__REG(0x90020000)
+#define NS921X_UARTD	__REG(0x90028000)
+
+#define NS921X_UART_ENABLED(base)					\
+		(__raw_readl((base) + 0x1000) & (1 << 29))
+
+static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
+{
+	if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
+		/* ns9360 or ns9750 */
+		if (NS9360_UART_ENABLED(NS9360_UARTA)) {
+			*putc = putc_ns9360;
+			*base = NS9360_UARTA;
+			return;
+		} else if (NS9360_UART_ENABLED(NS9360_UARTB)) {
+			*putc = putc_ns9360;
+			*base = NS9360_UARTB;
+			return;
+		} else if (NS9360_UART_ENABLED(NS9360_UARTC)) {
+			*putc = putc_ns9360;
+			*base = NS9360_UARTC;
+			return;
+		} else if (NS9360_UART_ENABLED(NS9360_UARTD)) {
+			*putc = putc_ns9360;
+			*base = NS9360_UARTD;
+			return;
+		} else if (__raw_readl(__REG(0xa09001f4)) == 0xfffff001) {
+			*putc = putc_a9m9750dev;
+			*base = A9M9750DEV_UARTA;
+			return;
+		}
+	} else if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x02) {
+		/* ns921x */
+		u32 clock = __raw_readl(NS921XSYS_CLOCK);
+
+		if ((clock & (1 << 1)) &&
+				NS921X_UART_ENABLED(NS921X_UARTA)) {
+			*putc = putc_ns921x;
+			*base = NS921X_UARTA;
+			return;
+		} else if ((clock & (1 << 2)) &&
+				NS921X_UART_ENABLED(NS921X_UARTB)) {
+			*putc = putc_ns921x;
+			*base = NS921X_UARTB;
+			return;
+		} else if ((clock & (1 << 3)) &&
+				NS921X_UART_ENABLED(NS921X_UARTC)) {
+			*putc = putc_ns921x;
+			*base = NS921X_UARTC;
+			return;
+		} else if ((clock & (1 << 4)) &&
+				NS921X_UART_ENABLED(NS921X_UARTD)) {
+			*putc = putc_ns921x;
+			*base = NS921X_UARTD;
+			return;
+		}
+	}
+
+	*putc = putc_dummy;
+}
+
+void (*myputc)(char, void __iomem *);
+void __iomem *base;
+
+static void putc(char c)
+{
+	myputc(c, base);
+}
+
+static void arch_decomp_setup(void)
+{
+	autodetect(&myputc, &base);
+}
+#define arch_decomp_wdog()
+
+static void flush(void)
+{
+	/* nothing */
+}
+
+#endif /* ifndef __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-ns9xxx/include/mach/vmalloc.h b/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
new file mode 100644
index 000000000000..fe964d3bcc47
--- /dev/null
+++ b/arch/arm/mach-ns9xxx/include/mach/vmalloc.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-ns9xxx/include/mach/vmalloc.h
+ *
+ * Copyright (C) 2006 by Digi International Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END     (0xf0000000)
+
+#endif /* ifndef __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c
index ca85d24cf39f..38260d5f849b 100644
--- a/arch/arm/mach-ns9xxx/irq.c
+++ b/arch/arm/mach-ns9xxx/irq.c
@@ -12,10 +12,9 @@
 #include <linux/kernel_stat.h>
 #include <asm/io.h>
 #include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-#include <asm/arch-ns9xxx/regs-sys-common.h>
-#include <asm/arch-ns9xxx/irqs.h>
-#include <asm/arch-ns9xxx/board.h>
+#include <mach/regs-sys-common.h>
+#include <mach/irqs.h>
+#include <mach/board.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
index 9623fff6b3bc..2858417d8d8a 100644
--- a/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
+++ b/arch/arm/mach-ns9xxx/mach-cc9p9360dev.c
@@ -11,7 +11,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <mach/processor-ns9360.h>
 
 #include "board-a9m9750dev.h"
 #include "generic.h"
diff --git a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
index fcc815bdd291..729f68da4293 100644
--- a/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
+++ b/arch/arm/mach-ns9xxx/mach-cc9p9360js.c
@@ -11,7 +11,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch-ns9xxx/processor-ns9360.h>
+#include <mach/processor-ns9360.h>
 
 #include "board-jscc9p9360.h"
 #include "generic.h"
diff --git a/arch/arm/mach-ns9xxx/plat-serial8250.c b/arch/arm/mach-ns9xxx/plat-serial8250.c
index 5aa5d9baf8c8..795b15e8982a 100644
--- a/arch/arm/mach-ns9xxx/plat-serial8250.c
+++ b/arch/arm/mach-ns9xxx/plat-serial8250.c
@@ -11,8 +11,8 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
-#include <asm/arch-ns9xxx/regs-board-a9m9750dev.h>
-#include <asm/arch-ns9xxx/board.h>
+#include <mach/regs-board-a9m9750dev.h>
+#include <mach/board.h>
 
 #define DRIVER_NAME "serial8250"
 
diff --git a/arch/arm/mach-ns9xxx/processor-ns9360.c b/arch/arm/mach-ns9xxx/processor-ns9360.c
index 2bee0b7fccbb..abee8338735d 100644
--- a/arch/arm/mach-ns9xxx/processor-ns9360.c
+++ b/arch/arm/mach-ns9xxx/processor-ns9360.c
@@ -14,8 +14,8 @@
 
 #include <asm/page.h>
 #include <asm/mach/map.h>
-#include <asm/arch-ns9xxx/processor-ns9360.h>
-#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
 
 void ns9360_reset(char mode)
 {
diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c
index 4d573c9793ed..a63424d083d9 100644
--- a/arch/arm/mach-ns9xxx/time-ns9360.c
+++ b/arch/arm/mach-ns9xxx/time-ns9360.c
@@ -15,10 +15,10 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 
-#include <asm/arch-ns9xxx/processor-ns9360.h>
-#include <asm/arch-ns9xxx/regs-sys-ns9360.h>
-#include <asm/arch-ns9xxx/irqs.h>
-#include <asm/arch/system.h>
+#include <mach/processor-ns9360.h>
+#include <mach/regs-sys-ns9360.h>
+#include <mach/irqs.h>
+#include <mach/system.h>
 #include "generic.h"
 
 #define TIMER_CLOCKSOURCE 0
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 8b102ad59c14..2e618391cc51 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -17,18 +17,18 @@
 #include <linux/input.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/board-ams-delta.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/board-ams-delta.h>
+#include <mach/gpio.h>
+#include <mach/keypad.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
 
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 1bdb66638e29..db789461fca4 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -20,21 +20,21 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
-#include <asm/arch/board-fsample.h>
+#include <mach/tc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/nand.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/board.h>
+#include <mach/board-fsample.h>
 
 static int fsample_keymap[] = {
 	KEY(0,0,KEY_UP),
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index c711bf23f7b4..7d2670205373 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -17,16 +17,16 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
 
 static void __init omap_generic_init_irq(void)
 {
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 6fdc78406b21..ab9ee5820c48 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -12,8 +12,8 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 #ifdef CONFIG_MMC_OMAP
 static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 4b444fdaafea..3b65914b9141 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -29,7 +29,7 @@
 #include <linux/input.h>
 #include <linux/i2c/tps65010.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
 #include <asm/mach-types.h>
@@ -37,16 +37,16 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio-switch.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpio-switch.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/nand.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static int h2_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 66ecc437928f..36085819098c 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -12,8 +12,8 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 #ifdef CONFIG_MMC_OMAP
 static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 7fbaa8d648cd..2ced6d9984d2 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -31,7 +31,7 @@
 
 #include <asm/setup.h>
 #include <asm/page.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
 #include <asm/mach-types.h>
@@ -39,18 +39,18 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpioexpander.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpioexpander.h>
+#include <mach/irqs.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/nand.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/dma.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 #define H3_TS_GPIO	48
 
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 4b8ae3ee0d05..cbc11be5cd2a 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -24,21 +24,21 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
+#include <mach/tc.h>
+#include <mach/usb.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static int innovator_keymap[] = {
 	KEY(0, 0, KEY_F1),
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 3f39e0e79c9f..38d9783ac6d6 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -20,21 +20,21 @@
 #include <linux/workqueue.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/dsp_common.h>
-#include <asm/arch/aic23.h>
-#include <asm/arch/omapfb.h>
-#include <asm/arch/lcd_mipid.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/dsp_common.h>
+#include <mach/aic23.h>
+#include <mach/omapfb.h>
+#include <mach/lcd_mipid.h>
 
 #define ADS7846_PENDOWN_GPIO	15
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 845c66371ca3..3e766e49f7cc 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -39,7 +39,7 @@
 
 #include <linux/i2c/tps65010.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/gpio.h>
 
 #include <asm/mach-types.h>
@@ -47,12 +47,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/usb.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/usb.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static struct mtd_partition osk_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
@@ -288,7 +288,7 @@ static void __init osk_init_cf(void)
 		return;
 	}
 	/* the CF I/O IRQ is really active-low */
-	set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING);
+	set_irq_type(OMAP_GPIO_IRQ(62), IRQ_TYPE_EDGE_FALLING);
 }
 
 static void __init osk_init_irq(void)
@@ -340,7 +340,7 @@ static struct omap_board_config_kernel osk_config[] __initdata = {
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
-#include <asm/arch/keypad.h>
+#include <mach/keypad.h>
 
 static const int osk_keymap[] = {
 	/* KEY(col, row, code) */
@@ -483,7 +483,7 @@ static void __init osk_mistral_init(void)
 	omap_cfg_reg(P20_1610_GPIO4);	/* PENIRQ */
 	gpio_request(4, "ts_int");
 	gpio_direction_input(4);
-	set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING);
+	set_irq_type(OMAP_GPIO_IRQ(4), IRQ_TYPE_EDGE_FALLING);
 
 	spi_register_board_info(mistral_boardinfo,
 			ARRAY_SIZE(mistral_boardinfo));
@@ -494,7 +494,7 @@ static void __init osk_mistral_init(void)
 		int ret = 0;
 
 		gpio_direction_input(OMAP_MPUIO(2));
-		set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING);
+		set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQ_TYPE_EDGE_RISING);
 #ifdef	CONFIG_PM
 		/* share the IRQ in case someone wants to use the
 		 * button for more than wakeup from system sleep.
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index a4d20127a60e..b58043644a6f 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -27,23 +27,23 @@
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/tc.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
 
 static void __init omap_palmte_init_irq(void)
 {
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 2a033689f9f4..40f9860a09df 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -23,24 +23,24 @@
 #include <linux/mtd/partitions.h>
 #include <linux/leds.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/led.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/led.h>
+#include <mach/mcbsp.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/dma.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index e020c2774606..e719294250b1 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -26,23 +26,23 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/omap-alsa.h>
+#include <mach/mcbsp.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/dma.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/irda.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -298,11 +298,11 @@ palmz71_powercable(int irq, void *dev_id)
 	if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) {
 		printk(KERN_INFO "PM: Power cable connected\n");
 		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
-				IRQT_FALLING);
+				IRQ_TYPE_EDGE_FALLING);
 	} else {
 		printk(KERN_INFO "PM: Power cable disconnected\n");
 		set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO),
-				IRQT_RISING);
+				IRQ_TYPE_EDGE_RISING);
 	}
 	return IRQ_HANDLED;
 }
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 94bc0745ab2c..b715917bfdaf 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -20,20 +20,20 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
-#include <asm/arch/nand.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
+#include <mach/tc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
+#include <mach/nand.h>
+#include <mach/keypad.h>
+#include <mach/common.h>
+#include <mach/board.h>
 
 static int p2_keymap[] = {
 	KEY(0,0,KEY_UP),
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 8c93d47719e8..0be4ebaa2842 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -12,9 +12,9 @@
  * published by the Free Software Foundation.
  */
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/gpio.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
+#include <mach/gpio.h>
 
 #ifdef CONFIG_MMC_OMAP
 static int slot_cover_open;
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index e473fa6d4a5f..130bcc6fd082 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -26,22 +26,22 @@
 #include <linux/i2c.h>
 #include <linux/errno.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/omap-alsa.h>
-#include <asm/arch/keypad.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/irda.h>
+#include <mach/usb.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/mcbsp.h>
+#include <mach/omap-alsa.h>
+#include <mach/keypad.h>
 
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 5c00b3f39cdd..213b48787102 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -22,17 +22,17 @@
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/usb.h>
+#include <mach/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
+#include <mach/usb.h>
 
 static struct plat_serial8250_port voiceblue_ports[] = {
 	{
@@ -186,10 +186,10 @@ static void __init voiceblue_init(void)
 	omap_request_gpio(13);
 	omap_request_gpio(14);
 	omap_request_gpio(15);
-	set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING);
-	set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(12), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(14), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(15), IRQ_TYPE_EDGE_RISING);
 
 	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
 	omap_board_config = voiceblue_config;
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 4ea2933f887d..5965cf09f8c4 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -21,10 +21,10 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/cpu.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/cpu.h>
+#include <mach/usb.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 
 #include "clock.h"
 
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index da8a3ac47e13..ab708d4c597e 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -14,15 +14,14 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
 
 /*-------------------------------------------------------------------------*/
 
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 0cf62ef5ecb7..4449d86095f6 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -22,13 +22,13 @@
 #include <linux/device.h>
 #include <linux/errno.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
 
 static void fpga_mask_irq(unsigned int irq)
 {
@@ -181,7 +181,7 @@ void omap1510_fpga_init_irq(void)
 	 */
 	omap_request_gpio(13);
 	omap_set_gpio_direction(13, 1);
-	set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux);
 }
 
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 81c4e738506c..2b9750b200ce 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -15,8 +15,8 @@
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
 #include <asm/io.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/tc.h>
+#include <mach/mux.h>
+#include <mach/tc.h>
 
 extern int omap1_clk_init(void);
 extern void omap_check_revision(void);
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index 1da9d59a0347..0ec6c1ec4250 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -41,11 +41,11 @@
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/cpu.h>
+#include <mach/gpio.h>
+#include <mach/cpu.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index 8976fbb21f7c..610f51f18741 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -14,13 +14,13 @@
 #include <linux/sched.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/leds-innovator.c b/arch/arm/mach-omap1/leds-innovator.c
index e7835d6f53a0..9b99c2894623 100644
--- a/arch/arm/mach-omap1/leds-innovator.c
+++ b/arch/arm/mach-omap1/leds-innovator.c
@@ -3,7 +3,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 754383dde807..98e789622dfd 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -5,11 +5,11 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 3f9dcac4fd41..6cdad93c4a00 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -9,8 +9,8 @@
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index bad1e7152d8e..af44eab1ed24 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -13,8 +13,8 @@
 #include <linux/resource.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <asm/arch/mailbox.h>
-#include <asm/arch/irqs.h>
+#include <mach/mailbox.h>
+#include <mach/irqs.h>
 #include <asm/io.h>
 
 #define MAILBOX_ARM2DSP1		0x00
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 2d2c2522b048..826010d5d014 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -17,11 +17,11 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/mcbsp.h>
-#include <asm/arch/dsp_common.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
+#include <mach/cpu.h>
+#include <mach/mcbsp.h>
+#include <mach/dsp_common.h>
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index e207bf7cb853..898516e362e7 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -28,7 +28,7 @@
 #include <asm/io.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 742f79e73bd7..63c4ea18b1ca 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -47,17 +47,16 @@
 #include <asm/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/cpu.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/tc.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/dmtimer.h>
+
+#include <mach/cpu.h>
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/tc.h>
+#include <mach/pm.h>
+#include <mach/mux.h>
+#include <mach/dma.h>
+#include <mach/dmtimer.h>
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 10a4fe88b2fd..0e25a996bb4c 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -22,12 +22,12 @@
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/fpga.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
+#include <mach/fpga.h>
 #ifdef CONFIG_PM
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
 #endif
 
 static struct clk * uart1_ck;
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index 68f5b39030b6..f3eac932092d 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -34,8 +34,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/pm.h>
+#include <mach/io.h>
+#include <mach/pm.h>
 
 		.text
 
diff --git a/arch/arm/mach-omap1/sram.S b/arch/arm/mach-omap1/sram.S
index 126d252062d7..261cdc48228b 100644
--- a/arch/arm/mach-omap1/sram.S
+++ b/arch/arm/mach-omap1/sram.S
@@ -10,8 +10,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 
 	.text
 
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 5d2b270935a2..e54708595ecf 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -45,7 +45,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index fbbdb806c95a..e67760189d14 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -46,13 +46,13 @@
 #include <linux/clockchips.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/dmtimer.h>
 
 struct sys_timer omap_timer;
 
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 1682eb77c46d..d4d6385cad7c 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -22,17 +22,17 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/gpmc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 620fa0f120ee..989ad152d7f8 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -29,19 +29,19 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/led.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/gpmc.h>
-#include <asm/arch/control.h>
+#include <mach/gpio.h>
+#include <mach/led.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/gpmc.h>
+#include <mach/control.h>
 
 /* LED & Switch macros */
 #define LED0_GPIO13		13
@@ -337,17 +337,17 @@ static void __init apollon_sw_init(void)
 	omap_request_gpio(SW_DOWN_GPIO58);
 	omap_set_gpio_direction(SW_DOWN_GPIO58, 1);
 
-	set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING);
 	if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt,
 				IRQF_SHARED, "enter sw",
 				&apollon_sw_interrupt))
 		return;
-	set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING);
 	if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt,
 				IRQF_SHARED, "up sw",
 				&apollon_sw_interrupt))
 		return;
-	set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING);
+	set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING);
 	if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt,
 				IRQF_SHARED, "down sw",
 				&apollon_sw_interrupt))
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index df8be081e159..9ba097868e72 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -20,16 +20,16 @@
 #include <linux/init.h>
 #include <linux/device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
+#include <mach/common.h>
 
 static void __init omap_generic_init_irq(void)
 {
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 0d28f6897c8e..9e2624ca70a2 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -22,24 +22,24 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/gpioexpander.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/board.h>
-#include <asm/arch/common.h>
-#include <asm/arch/keypad.h>
-#include <asm/arch/menelaus.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/gpmc.h>
+#include <mach/control.h>
+#include <mach/gpio.h>
+#include <mach/gpioexpander.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/irda.h>
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/keypad.h>
+#include <mach/menelaus.h>
+#include <mach/dma.h>
+#include <mach/gpmc.h>
 
 #include <asm/io.h>
 
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index 15675bce8012..1d891e4a6933 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -25,9 +25,9 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/cpu.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/cpu.h>
 #include <asm/div64.h>
 
 #include "memory.h"
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 3cd37cb57c5a..626e5fa93b6a 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -16,7 +16,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK_H
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 /* The maximum error between a target DPLL rate and the rounded rate in Hz */
 #define DEFAULT_DPLL_RATE_TOLERANCE	50000
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index aa567876651d..295e671e9cfd 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -28,8 +28,8 @@
 #include <linux/io.h>
 #include <linux/cpufreq.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 #include <asm/div64.h>
 #include <asm/bitops.h>
 
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 4263099b1ad3..3ff74952f835 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -26,8 +26,8 @@
 #include <linux/io.h>
 #include <linux/limits.h>
 
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 #include <asm/div64.h>
 #include <asm/bitops.h>
 
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 05757eb032bc..ec664457a11a 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -19,7 +19,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
 
-#include <asm/arch/control.h>
+#include <mach/control.h>
 
 #include "clock.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 51f70300996f..5f3aad977842 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -15,8 +15,8 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/control.h>
+#include <mach/common.h>
+#include <mach/control.h>
 
 static void __iomem *omap2_ctrl_base;
 
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index b603bc5f8e5b..7a7f02559075 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -14,15 +14,15 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
 
 #if	defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
 
@@ -142,7 +142,7 @@ static inline void omap_init_sti(void) {}
 
 #if defined(CONFIG_SPI_OMAP24XX)
 
-#include <asm/arch/mcspi.h>
+#include <mach/mcspi.h>
 
 #define OMAP2_MCSPI1_BASE		0x48098000
 #define OMAP2_MCSPI2_BASE		0x4809a000
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index dbf68dc50ae2..f51d69bc457d 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -18,7 +18,7 @@
 
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/arch/gpmc.h>
+#include <mach/gpmc.h>
 
 #undef DEBUG
 
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index dff4b16cead6..a5d4526ac4d6 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -17,8 +17,8 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/cpu.h>
+#include <mach/control.h>
+#include <mach/cpu.h>
 
 #if defined(CONFIG_ARCH_OMAP2420)
 #define TAP_BASE	io_p2v(0x48014000)
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 69c8174f3aac..987351f07d7b 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -21,8 +21,8 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/arch/mux.h>
-#include <asm/arch/omapfb.h>
+#include <mach/mux.h>
+#include <mach/omapfb.h>
 
 extern void omap_sram_init(void);
 extern int omap2_clk_init(void);
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index f064f725e724..9ef15b31d8fc 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -13,7 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 #include <asm/irq.h>
 #include <asm/io.h>
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 4799561c5a9e..a480b96948e4 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -14,8 +14,8 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
-#include <asm/arch/mailbox.h>
-#include <asm/arch/irqs.h>
+#include <mach/mailbox.h>
+#include <mach/irqs.h>
 #include <asm/io.h>
 
 #define MAILBOX_REVISION		0x00
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 17cf199d1130..27eb6e3ca926 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -17,10 +17,10 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/dma.h>
+#include <mach/mux.h>
+#include <mach/cpu.h>
+#include <mach/mcbsp.h>
 
 struct mcbsp_internal_clk {
 	struct clk clk;
diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c
index 73cadb2c75cf..6b49cc9cbdcb 100644
--- a/arch/arm/mach-omap2/memory.c
+++ b/arch/arm/mach-omap2/memory.c
@@ -24,9 +24,9 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
+#include <mach/common.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
 
 #include "prm.h"
 
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 8f98b20f30a1..443d07fef7f3 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -29,8 +29,8 @@
 #include <asm/io.h>
 #include <linux/spinlock.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
+#include <mach/control.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index d6c9de82ca0c..8671e1079ab5 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -30,12 +30,11 @@
 #include <asm/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/mach-types.h>
 
-#include <asm/arch/irqs.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/pm.h>
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/pm.h>
 
 static struct clk *vclk;
 static void (*omap2_sram_idle)(void);
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index fd92a80f38f2..f945156d5585 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -18,8 +18,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/prcm.h>
+#include <mach/common.h>
+#include <mach/prcm.h>
 
 #include "clock.h"
 #include "prm.h"
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 1b1fe4f6e030..1a8bbd094066 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -15,7 +15,7 @@
  */
 #undef DEBUG
 
-#include <asm/arch/sdrc.h>
+#include <mach/sdrc.h>
 
 #ifndef __ASSEMBLER__
 extern void __iomem *omap2_sdrc_base;
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index e9c367fc9f61..adc8a26a8fb0 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -20,8 +20,8 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
+#include <mach/common.h>
+#include <mach/board.h>
 
 static struct clk * uart1_ick = NULL;
 static struct clk * uart1_fck = NULL;
diff --git a/arch/arm/mach-omap2/sleep.S b/arch/arm/mach-omap2/sleep.S
index 46ccb9b8b583..87a706fd5f82 100644
--- a/arch/arm/mach-omap2/sleep.S
+++ b/arch/arm/mach-omap2/sleep.S
@@ -23,8 +23,8 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/arch/pm.h>
+#include <mach/io.h>
+#include <mach/pm.h>
 
 #include "sdrc.h"
 
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 4c274510f3e9..af4bd3490227 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -24,8 +24,8 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 
 #include "prm.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index a3fa48dc08cd..84363e269e8c 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -24,8 +24,8 @@
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/arch/io.h>
-#include <asm/hardware.h>
+#include <mach/io.h>
+#include <mach/hardware.h>
 
 #include "prm.h"
 #include "cm.h"
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 557603f99313..589393bedade 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -34,7 +34,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/dmtimer.h>
 
 static struct omap_dm_timer *gptimer;
 static struct clock_event_device clockevent_gpt;
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 80bb42eb5082..1607c941d95f 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -15,9 +15,9 @@
 
 #include <linux/usb/musb.h>
 
-#include <asm/arch/gpmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/mux.h>
+#include <mach/gpmc.h>
+#include <mach/gpio.h>
+#include <mach/mux.h>
 
 
 static u8		async_cs, sync_cs;
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 6f0dbda6c44c..bea37972120a 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -13,7 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include "common.h"
 
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index faf4e3211918..168eeacaa4c0 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -24,8 +24,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/orion5x.h>
+#include <mach/hardware.h>
+#include <mach/orion5x.h>
 #include <asm/plat-orion/ehci-orion.h>
 #include <asm/plat-orion/orion_nand.h>
 #include <asm/plat-orion/time.h>
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 88405e74e5e3..48ce6d0e0020 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -24,7 +24,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include <asm/plat-orion/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
@@ -213,7 +213,7 @@ void __init db88f5281_pci_preinit(void)
 	pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int1") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "db88f5281_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);
@@ -226,7 +226,7 @@ void __init db88f5281_pci_preinit(void)
 	pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int2") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "db88f5281_pci_preinit faield "
 					"to set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 3791ca6f001a..1a1d84b80a65 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -25,7 +25,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/gpio.c b/arch/arm/mach-orion5x/gpio.c
index d09797990f41..cd8a16f67d2b 100644
--- a/arch/arm/mach-orion5x/gpio.c
+++ b/arch/arm/mach-orion5x/gpio.c
@@ -17,7 +17,7 @@
 #include <linux/bitops.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 
 static DEFINE_SPINLOCK(gpio_lock);
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
new file mode 100644
index 000000000000..c7f808bfe272
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/orion5x.h>
+
+	.macro  addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =ORION5X_REGS_PHYS_BASE
+	ldrne	\rx, =ORION5X_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-orion5x/include/mach/dma.h b/arch/arm/mach-orion5x/include/mach/dma.h
new file mode 100644
index 000000000000..40a8c178f10d
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/dma.h
@@ -0,0 +1 @@
+/* empty */
diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S
new file mode 100644
index 000000000000..4351937035cd
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S
@@ -0,0 +1,31 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Orion platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/orion5x.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =MAIN_IRQ_CAUSE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\irqstat, [\base, #0]		@ main cause
+	ldr	\tmp, [\base, #(MAIN_IRQ_MASK - MAIN_IRQ_CAUSE)] @ main mask
+	mov	\irqnr, #0			@ default irqnr
+	@ find cause bits that are unmasked
+	ands	\irqstat, \irqstat, \tmp	@ clear Z flag if any
+	clzne	\irqnr,	\irqstat		@ calc irqnr
+	rsbne	\irqnr, \irqnr, #31
+	.endm
diff --git a/arch/arm/mach-orion5x/include/mach/gpio.h b/arch/arm/mach-orion5x/include/mach/gpio.h
new file mode 100644
index 000000000000..65dc136a86f7
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/gpio.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+extern int gpio_request(unsigned pin, const char *label);
+extern void gpio_free(unsigned pin);
+extern int gpio_direction_input(unsigned pin);
+extern int gpio_direction_output(unsigned pin, int value);
+extern int gpio_get_value(unsigned pin);
+extern void gpio_set_value(unsigned pin, int value);
+extern void orion5x_gpio_set_blink(unsigned pin, int blink);
+extern void gpio_display(void);		/* debug */
+
+static inline int gpio_to_irq(int pin)
+{
+	return pin + IRQ_ORION5X_GPIO_START;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+	return irq - IRQ_ORION5X_GPIO_START;
+}
+
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
diff --git a/arch/arm/mach-orion5x/include/mach/hardware.h b/arch/arm/mach-orion5x/include/mach/hardware.h
new file mode 100644
index 000000000000..e51aaf4bf2b5
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/hardware.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/hardware.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "orion5x.h"
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO		0x00001000
+#define PCIBIOS_MIN_MEM		0x01000000
+#define PCIMEM_BASE		ORION5X_PCIE_MEM_PHYS_BASE
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h
new file mode 100644
index 000000000000..f24b2513f7f3
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/io.h
@@ -0,0 +1,63 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/io.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "orion5x.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+static inline void __iomem *
+__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
+{
+	void __iomem *retval;
+	unsigned long offs = paddr - ORION5X_REGS_PHYS_BASE;
+	if (mtype == MT_DEVICE && size && offs < ORION5X_REGS_SIZE &&
+	    size <= ORION5X_REGS_SIZE && offs + size <= ORION5X_REGS_SIZE) {
+		retval = (void __iomem *)ORION5X_REGS_VIRT_BASE + offs;
+	} else {
+		retval = __arm_ioremap(paddr, size, mtype);
+	}
+
+	return retval;
+}
+
+static inline void
+__arch_iounmap(void __iomem *addr)
+{
+	if (addr < (void __iomem *)ORION5X_REGS_VIRT_BASE ||
+	    addr >= (void __iomem *)(ORION5X_REGS_VIRT_BASE + ORION5X_REGS_SIZE))
+		__iounmap(addr);
+}
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+
+#define __arch_ioremap(p, s, m)	__arch_ioremap(p, s, m)
+#define __arch_iounmap(a)	__arch_iounmap(a)
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+
+/*****************************************************************************
+ * Helpers to access Orion registers
+ ****************************************************************************/
+/*
+ * These are not preempt-safe.  Locks, if needed, must be taken
+ * care of by the caller.
+ */
+#define orion5x_setbits(r, mask)	writel(readl(r) | (mask), (r))
+#define orion5x_clrbits(r, mask)	writel(readl(r) & ~(mask), (r))
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/irqs.h b/arch/arm/mach-orion5x/include/mach/irqs.h
new file mode 100644
index 000000000000..d5b0fbf6b965
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/irqs.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/irqs.h
+ *
+ * IRQ definitions for Orion SoC
+ *
+ *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ *  This file is licensed under the terms of the GNU General Public
+ *  License version 2. This program is licensed "as is" without any
+ *  warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include "orion5x.h"	/* need GPIO_MAX */
+
+/*
+ * Orion Main Interrupt Controller
+ */
+#define IRQ_ORION5X_BRIDGE		0
+#define IRQ_ORION5X_DOORBELL_H2C	1
+#define IRQ_ORION5X_DOORBELL_C2H	2
+#define IRQ_ORION5X_UART0		3
+#define IRQ_ORION5X_UART1		4
+#define IRQ_ORION5X_I2C			5
+#define IRQ_ORION5X_GPIO_0_7		6
+#define IRQ_ORION5X_GPIO_8_15		7
+#define IRQ_ORION5X_GPIO_16_23		8
+#define IRQ_ORION5X_GPIO_24_31		9
+#define IRQ_ORION5X_PCIE0_ERR		10
+#define IRQ_ORION5X_PCIE0_INT		11
+#define IRQ_ORION5X_USB1_CTRL		12
+#define IRQ_ORION5X_DEV_BUS_ERR		14
+#define IRQ_ORION5X_PCI_ERR		15
+#define IRQ_ORION5X_USB_BR_ERR		16
+#define IRQ_ORION5X_USB0_CTRL		17
+#define IRQ_ORION5X_ETH_RX		18
+#define IRQ_ORION5X_ETH_TX		19
+#define IRQ_ORION5X_ETH_MISC		20
+#define IRQ_ORION5X_ETH_SUM		21
+#define IRQ_ORION5X_ETH_ERR		22
+#define IRQ_ORION5X_IDMA_ERR		23
+#define IRQ_ORION5X_IDMA_0		24
+#define IRQ_ORION5X_IDMA_1		25
+#define IRQ_ORION5X_IDMA_2		26
+#define IRQ_ORION5X_IDMA_3		27
+#define IRQ_ORION5X_CESA		28
+#define IRQ_ORION5X_SATA		29
+#define IRQ_ORION5X_XOR0		30
+#define IRQ_ORION5X_XOR1		31
+
+/*
+ * Orion General Purpose Pins
+ */
+#define IRQ_ORION5X_GPIO_START	32
+#define NR_GPIO_IRQS		GPIO_MAX
+
+#define NR_IRQS			(IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h
new file mode 100644
index 000000000000..54dd76b013f2
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/memory.h
@@ -0,0 +1,16 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/memory.h
+ *
+ * Marvell Orion memory definitions
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x00000000)
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
new file mode 100644
index 000000000000..f52a7d65bec2
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -0,0 +1,162 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/orion5x.h
+ *
+ * Generic definitions of Orion SoC flavors:
+ *  Orion-1, Orion-VoIP, Orion-NAS, and Orion-2.
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_ORION5X_H
+#define __ASM_ARCH_ORION5X_H
+
+/*****************************************************************************
+ * Orion Address Maps
+ *
+ * phys
+ * e0000000	PCIe MEM space
+ * e8000000	PCI MEM space
+ * f0000000	PCIe WA space (Orion-1/Orion-NAS only)
+ * f1000000	on-chip peripheral registers
+ * f2000000	PCIe I/O space
+ * f2100000	PCI I/O space
+ * f4000000	device bus mappings (boot)
+ * fa000000	device bus mappings (cs0)
+ * fa800000	device bus mappings (cs2)
+ * fc000000	device bus mappings (cs0/cs1)
+ *
+ * virt		phys		size
+ * fdd00000	f1000000	1M	on-chip peripheral registers
+ * fde00000	f2000000	1M	PCIe I/O space
+ * fdf00000	f2100000	1M	PCI I/O space
+ * fe000000	f0000000	16M	PCIe WA space (Orion-1/Orion-NAS only)
+ ****************************************************************************/
+#define ORION5X_REGS_PHYS_BASE		0xf1000000
+#define ORION5X_REGS_VIRT_BASE		0xfdd00000
+#define ORION5X_REGS_SIZE		SZ_1M
+
+#define ORION5X_PCIE_IO_PHYS_BASE	0xf2000000
+#define ORION5X_PCIE_IO_VIRT_BASE	0xfde00000
+#define ORION5X_PCIE_IO_BUS_BASE	0x00000000
+#define ORION5X_PCIE_IO_SIZE		SZ_1M
+
+#define ORION5X_PCI_IO_PHYS_BASE	0xf2100000
+#define ORION5X_PCI_IO_VIRT_BASE	0xfdf00000
+#define ORION5X_PCI_IO_BUS_BASE		0x00100000
+#define ORION5X_PCI_IO_SIZE		SZ_1M
+
+/* Relevant only for Orion-1/Orion-NAS */
+#define ORION5X_PCIE_WA_PHYS_BASE	0xf0000000
+#define ORION5X_PCIE_WA_VIRT_BASE	0xfe000000
+#define ORION5X_PCIE_WA_SIZE		SZ_16M
+
+#define ORION5X_PCIE_MEM_PHYS_BASE	0xe0000000
+#define ORION5X_PCIE_MEM_SIZE		SZ_128M
+
+#define ORION5X_PCI_MEM_PHYS_BASE	0xe8000000
+#define ORION5X_PCI_MEM_SIZE		SZ_128M
+
+/*******************************************************************************
+ * Supported Devices & Revisions
+ ******************************************************************************/
+/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
+#define MV88F5181_DEV_ID	0x5181
+#define MV88F5181_REV_B1	3
+#define MV88F5181L_REV_A0	8
+#define MV88F5181L_REV_A1	9
+/* Orion-NAS (88F5182) */
+#define MV88F5182_DEV_ID	0x5182
+#define MV88F5182_REV_A2	2
+/* Orion-2 (88F5281) */
+#define MV88F5281_DEV_ID	0x5281
+#define MV88F5281_REV_D1	5
+#define MV88F5281_REV_D2	6
+
+/*******************************************************************************
+ * Orion Registers Map
+ ******************************************************************************/
+#define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x00000)
+#define ORION5X_DDR_REG(x)		(ORION5X_DDR_VIRT_BASE | (x))
+
+#define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE | 0x10000)
+#define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x10000)
+#define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE | (x))
+#define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE | 0x1000)
+#define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2000)
+#define  UART0_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2000)
+#define  UART1_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE | 0x2100)
+#define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
+
+#define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE | 0x20000)
+#define ORION5X_BRIDGE_REG(x)		(ORION5X_BRIDGE_VIRT_BASE | (x))
+#define  TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE | 0x300)
+
+#define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x30000)
+#define ORION5X_PCI_REG(x)		(ORION5X_PCI_VIRT_BASE | (x))
+
+#define ORION5X_PCIE_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x40000)
+#define ORION5X_PCIE_REG(x)		(ORION5X_PCIE_VIRT_BASE | (x))
+
+#define ORION5X_USB0_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x50000)
+#define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x50000)
+#define ORION5X_USB0_REG(x)		(ORION5X_USB0_VIRT_BASE | (x))
+
+#define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x70000)
+#define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x70000)
+#define ORION5X_ETH_REG(x)		(ORION5X_ETH_VIRT_BASE | (x))
+
+#define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0x80000)
+#define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0x80000)
+#define ORION5X_SATA_REG(x)		(ORION5X_SATA_VIRT_BASE | (x))
+
+#define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE | 0xa0000)
+#define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE | 0xa0000)
+#define ORION5X_USB1_REG(x)		(ORION5X_USB1_VIRT_BASE | (x))
+
+/*******************************************************************************
+ * Device Bus Registers
+ ******************************************************************************/
+#define MPP_0_7_CTRL		ORION5X_DEV_BUS_REG(0x000)
+#define MPP_8_15_CTRL		ORION5X_DEV_BUS_REG(0x004)
+#define MPP_16_19_CTRL		ORION5X_DEV_BUS_REG(0x050)
+#define MPP_DEV_CTRL		ORION5X_DEV_BUS_REG(0x008)
+#define MPP_RESET_SAMPLE	ORION5X_DEV_BUS_REG(0x010)
+#define GPIO_OUT		ORION5X_DEV_BUS_REG(0x100)
+#define GPIO_IO_CONF		ORION5X_DEV_BUS_REG(0x104)
+#define GPIO_BLINK_EN		ORION5X_DEV_BUS_REG(0x108)
+#define GPIO_IN_POL		ORION5X_DEV_BUS_REG(0x10c)
+#define GPIO_DATA_IN		ORION5X_DEV_BUS_REG(0x110)
+#define GPIO_EDGE_CAUSE		ORION5X_DEV_BUS_REG(0x114)
+#define GPIO_EDGE_MASK		ORION5X_DEV_BUS_REG(0x118)
+#define GPIO_LEVEL_MASK		ORION5X_DEV_BUS_REG(0x11c)
+#define DEV_BANK_0_PARAM	ORION5X_DEV_BUS_REG(0x45c)
+#define DEV_BANK_1_PARAM	ORION5X_DEV_BUS_REG(0x460)
+#define DEV_BANK_2_PARAM	ORION5X_DEV_BUS_REG(0x464)
+#define DEV_BANK_BOOT_PARAM	ORION5X_DEV_BUS_REG(0x46c)
+#define DEV_BUS_CTRL		ORION5X_DEV_BUS_REG(0x4c0)
+#define DEV_BUS_INT_CAUSE	ORION5X_DEV_BUS_REG(0x4d0)
+#define DEV_BUS_INT_MASK	ORION5X_DEV_BUS_REG(0x4d4)
+#define GPIO_MAX		32
+
+/***************************************************************************
+ * Orion CPU Bridge Registers
+ **************************************************************************/
+#define CPU_CONF		ORION5X_BRIDGE_REG(0x100)
+#define CPU_CTRL		ORION5X_BRIDGE_REG(0x104)
+#define CPU_RESET_MASK		ORION5X_BRIDGE_REG(0x108)
+#define CPU_SOFT_RESET		ORION5X_BRIDGE_REG(0x10c)
+#define POWER_MNG_CTRL_REG	ORION5X_BRIDGE_REG(0x11C)
+#define BRIDGE_CAUSE		ORION5X_BRIDGE_REG(0x110)
+#define BRIDGE_MASK		ORION5X_BRIDGE_REG(0x114)
+#define  BRIDGE_INT_TIMER0	0x0002
+#define  BRIDGE_INT_TIMER1	0x0004
+#define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
+#define MAIN_IRQ_CAUSE		ORION5X_BRIDGE_REG(0x200)
+#define MAIN_IRQ_MASK		ORION5X_BRIDGE_REG(0x204)
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
new file mode 100644
index 000000000000..08e430757890
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/system.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/system.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <mach/orion5x.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	/*
+	 * Enable and issue soft reset
+	 */
+	orion5x_setbits(CPU_RESET_MASK, (1 << 2));
+	orion5x_setbits(CPU_SOFT_RESET, 1);
+}
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/include/mach/timex.h b/arch/arm/mach-orion5x/include/mach/timex.h
new file mode 100644
index 000000000000..e82e44db7629
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/timex.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/timex.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
+
+#define ORION5X_TCLK		166666667
diff --git a/arch/arm/mach-orion5x/include/mach/uncompress.h b/arch/arm/mach-orion5x/include/mach/uncompress.h
new file mode 100644
index 000000000000..4322dba468a4
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/uncompress.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/uncompress.h
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/orion5x.h>
+
+#define SERIAL_BASE	((unsigned char *)UART0_PHYS_BASE)
+
+static void putc(const char c)
+{
+	unsigned char *base = SERIAL_BASE;
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		if (base[UART_LSR << 2] & UART_LSR_THRE)
+			break;
+		barrier();
+	}
+
+	base[UART_TX << 2] = c;
+}
+
+static void flush(void)
+{
+	unsigned char *base = SERIAL_BASE;
+	unsigned char mask;
+	int i;
+
+	mask = UART_LSR_TEMT | UART_LSR_THRE;
+
+	for (i = 0; i < 0x1000; i++) {
+		if ((base[UART_LSR << 2] & mask) == mask)
+			break;
+		barrier();
+	}
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-orion5x/include/mach/vmalloc.h b/arch/arm/mach-orion5x/include/mach/vmalloc.h
new file mode 100644
index 000000000000..7147a297e97f
--- /dev/null
+++ b/arch/arm/mach-orion5x/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-orion5x/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END       0xfd800000
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index e2a0084ab4a3..cc2a017fd2a9 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -15,7 +15,7 @@
 #include <linux/irq.h>
 #include <asm/gpio.h>
 #include <asm/io.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include <asm/plat-orion/irq.h>
 #include "common.h"
 
@@ -91,27 +91,27 @@ static int orion5x_gpio_set_irq_type(u32 irq, u32 type)
 	desc = irq_desc + irq;
 
 	switch (type) {
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		desc->handle_irq = handle_level_irq;
 		desc->status |= IRQ_LEVEL;
 		orion5x_clrbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		desc->handle_irq = handle_level_irq;
 		desc->status |= IRQ_LEVEL;
 		orion5x_setbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
 		orion5x_clrbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
 		orion5x_setbits(GPIO_IN_POL, (1 << pin));
 		break;
-	case IRQT_BOTHEDGE:
+	case IRQ_TYPE_EDGE_BOTH:
 		desc->handle_irq = handle_edge_irq;
 		desc->status &= ~IRQ_LEVEL;
 		/*
@@ -156,7 +156,7 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 		if (cause & (1 << pin)) {
 			irq = gpio_to_irq(pin);
 			desc = irq_desc + irq;
-			if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) {
+			if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) {
 				/* Swap polarity (race with GPIO line) */
 				u32 polarity = readl(GPIO_IN_POL);
 				polarity ^= 1 << pin;
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 84feac4a1fe2..0caaaac74bc1 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -24,7 +24,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include <asm/plat-orion/orion_nand.h>
 #include "common.h"
 #include "mpp.h"
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
index a48cadb01590..c04ab0e16ea1 100644
--- a/arch/arm/mach-orion5x/mpp.c
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -11,7 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include "common.h"
 #include "mpp.h"
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 7ce9e407d9d1..4403cc963d66 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -25,7 +25,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 55f3b0fdef8b..67b2c0df615f 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -22,7 +22,7 @@
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index d50e3650a09e..e72fe1e065e8 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -15,12 +15,13 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -88,6 +89,8 @@ static struct orion5x_mpp_mode rd88f5181l_fxo_mpp_modes[] __initdata = {
 
 static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static void __init rd88f5181l_fxo_init(void)
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index b56447d32e17..a1fe3257320d 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -15,13 +15,14 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <linux/i2c.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -89,6 +90,8 @@ static struct orion5x_mpp_mode rd88f5181l_ge_mpp_modes[] __initdata = {
 
 static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 10ae62864269..8771cb76f0dc 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -24,7 +24,7 @@
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -148,7 +148,7 @@ void __init rd88f5182_pci_preinit(void)
 	pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
 	if (gpio_request(pin, "PCI IntA") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "rd88f5182_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);
@@ -161,7 +161,7 @@ void __init rd88f5182_pci_preinit(void)
 	pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
 	if (gpio_request(pin, "PCI IntB") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "rd88f5182_pci_preinit faield to "
 					"set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index a9cef9703d5b..809132de31d2 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -26,7 +26,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 #include "tsx09-common.h"
@@ -117,7 +117,7 @@ void __init qnap_ts209_pci_preinit(void)
 	pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int1") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
 					"set_irq_type pin %d\n", pin);
@@ -131,7 +131,7 @@ void __init qnap_ts209_pci_preinit(void)
 	pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
 	if (gpio_request(pin, "PCI Int2") == 0) {
 		if (gpio_direction_input(pin) == 0) {
-			set_irq_type(gpio_to_irq(pin), IRQT_LOW);
+			set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
 		} else {
 			printk(KERN_ERR "qnap_ts209_pci_preinit failed "
 					"to set_irq_type pin %d\n", pin);
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 32f0ff073b7e..6053e76ac967 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -24,7 +24,7 @@
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 #include "tsx09-common.h"
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 77e9f351f07a..014916a28fdc 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -18,7 +18,7 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 1af093ff8cf3..b6bc43e07eed 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -14,11 +14,12 @@
 #include <linux/delay.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -92,6 +93,8 @@ static struct platform_device wnr854t_nor_flash = {
 
 static struct mv643xx_eth_platform_data wnr854t_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static void __init wnr854t_init(void)
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index aeab55c6a82d..b10da17b3fbd 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -14,11 +14,12 @@
 #include <linux/delay.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
-#include <asm/arch/orion5x.h>
+#include <mach/orion5x.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -100,6 +101,8 @@ static struct platform_device wrt350n_v2_nor_flash = {
 
 static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
 	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
 };
 
 static void __init wrt350n_v2_init(void)
diff --git a/arch/arm/mach-pnx4008/clock.c b/arch/arm/mach-pnx4008/clock.c
index a5268c3ac5a7..24d036a24a72 100644
--- a/arch/arm/mach-pnx4008/clock.c
+++ b/arch/arm/mach-pnx4008/clock.c
@@ -21,10 +21,10 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 #include "clock.h"
 
 /*forward declaration*/
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 429c796938be..3ba46ede9bbd 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -26,7 +26,7 @@
 #include <linux/device.h>
 #include <linux/spi/spi.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -38,9 +38,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/irq.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/dma.h>
+#include <mach/irq.h>
+#include <mach/clock.h>
+#include <mach/dma.h>
 
 struct resource spipnx_0_resources[] = {
 	{
diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c
index fe152e82590b..833c56be7344 100644
--- a/arch/arm/mach-pnx4008/dma.c
+++ b/arch/arm/mach-pnx4008/dma.c
@@ -23,12 +23,12 @@
 #include <linux/clk.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 #include <asm/dma-mapping.h>
 #include <asm/io.h>
 #include <asm/mach/dma.h>
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 static struct dma_channel {
 	char *name;
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
index ef179cab80e2..fb51f7279e95 100644
--- a/arch/arm/mach-pnx4008/gpio.c
+++ b/arch/arm/mach-pnx4008/gpio.c
@@ -18,8 +18,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <asm/io.h>
-#include <asm/arch/platform.h>
-#include <asm/arch/gpio.h>
+#include <mach/platform.h>
+#include <mach/gpio.h>
 
 /* register definitions */
 #define PIO_VA_BASE	IO_ADDRESS(PNX4008_PIO_BASE)
diff --git a/arch/arm/mach-pnx4008/i2c.c b/arch/arm/mach-pnx4008/i2c.c
index 6f308827c4fe..87c093286ff9 100644
--- a/arch/arm/mach-pnx4008/i2c.c
+++ b/arch/arm/mach-pnx4008/i2c.c
@@ -14,8 +14,8 @@
 #include <linux/i2c-pnx.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
-#include <asm/arch/platform.h>
-#include <asm/arch/i2c.h>
+#include <mach/platform.h>
+#include <mach/i2c.h>
 
 static int set_clock_run(struct platform_device *pdev)
 {
diff --git a/arch/arm/mach-pnx4008/include/mach/clock.h b/arch/arm/mach-pnx4008/include/mach/clock.h
new file mode 100644
index 000000000000..8d2a5ef52c90
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/clock.h
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/clock.h
+ *
+ * Clock control driver for PNX4008 - header file
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PNX4008_CLOCK_H__
+#define __PNX4008_CLOCK_H__
+
+struct module;
+struct clk;
+
+#define PWRMAN_VA_BASE		IO_ADDRESS(PNX4008_PWRMAN_BASE)
+#define HCLKDIVCTRL_REG		(PWRMAN_VA_BASE + 0x40)
+#define PWRCTRL_REG		(PWRMAN_VA_BASE + 0x44)
+#define PLLCTRL_REG		(PWRMAN_VA_BASE + 0x48)
+#define OSC13CTRL_REG		(PWRMAN_VA_BASE + 0x4c)
+#define SYSCLKCTRL_REG		(PWRMAN_VA_BASE + 0x50)
+#define HCLKPLLCTRL_REG		(PWRMAN_VA_BASE + 0x58)
+#define USBCTRL_REG		(PWRMAN_VA_BASE + 0x64)
+#define SDRAMCLKCTRL_REG	(PWRMAN_VA_BASE + 0x68)
+#define MSCTRL_REG		(PWRMAN_VA_BASE + 0x80)
+#define BTCLKCTRL		(PWRMAN_VA_BASE + 0x84)
+#define DUMCLKCTRL_REG		(PWRMAN_VA_BASE + 0x90)
+#define I2CCLKCTRL_REG		(PWRMAN_VA_BASE + 0xac)
+#define KEYCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb0)
+#define TSCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb4)
+#define PWMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xb8)
+#define TIMCLKCTRL_REG		(PWRMAN_VA_BASE + 0xbc)
+#define SPICTRL_REG		(PWRMAN_VA_BASE + 0xc4)
+#define FLASHCLKCTRL_REG	(PWRMAN_VA_BASE + 0xc8)
+#define UART3CLK_REG		(PWRMAN_VA_BASE + 0xd0)
+#define UARTCLKCTRL_REG		(PWRMAN_VA_BASE + 0xe4)
+#define DMACLKCTRL_REG		(PWRMAN_VA_BASE + 0xe8)
+#define AUTOCLK_CTRL		(PWRMAN_VA_BASE + 0xec)
+#define JPEGCLKCTRL_REG		(PWRMAN_VA_BASE + 0xfc)
+
+#define AUDIOCONFIG_VA_BASE	IO_ADDRESS(PNX4008_AUDIOCONFIG_BASE)
+#define DSPPLLCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x60)
+#define DSPCLKCTRL_REG		(AUDIOCONFIG_VA_BASE + 0x64)
+#define AUDIOCLKCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x68)
+#define AUDIOPLLCTRL_REG	(AUDIOCONFIG_VA_BASE + 0x6C)
+
+#define USB_OTG_CLKCTRL_REG	IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0xff4)
+
+#define VFP9CLKCTRL_REG		IO_ADDRESS(PNX4008_DEBUG_BASE)
+
+#define CLK_RATE_13MHZ 13000
+#define CLK_RATE_1MHZ 1000
+#define CLK_RATE_208MHZ 208000
+#define CLK_RATE_48MHZ 48000
+#define CLK_RATE_32KHZ 32
+
+#define PNX4008_UART_CLK CLK_RATE_13MHZ * 1000 /* in MHz */
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
new file mode 100644
index 000000000000..6d1407f319f8
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-pnx4008/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		mov	\rx, #0x00090000
+		addeq	\rx, \rx, #0x40000000
+		addne	\rx, \rx, #0xf4000000
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-pnx4008/include/mach/dma.h b/arch/arm/mach-pnx4008/include/mach/dma.h
new file mode 100644
index 000000000000..5442d04fc575
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/dma.h
@@ -0,0 +1,162 @@
+/*
+ *  arch/arm/mach-pnx4008/include/mach/dma.h
+ *
+ *  PNX4008 DMA header file
+ *
+ *  Author:	Vitaly Wool
+ *  Copyright:	MontaVista Software Inc. (c) 2005
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include "platform.h"
+
+#define MAX_DMA_ADDRESS		0xffffffff
+
+#define MAX_DMA_CHANNELS	8
+
+#define DMAC_BASE		IO_ADDRESS(PNX4008_DMA_CONFIG_BASE)
+#define DMAC_INT_STAT		(DMAC_BASE + 0x0000)
+#define DMAC_INT_TC_STAT	(DMAC_BASE + 0x0004)
+#define DMAC_INT_TC_CLEAR	(DMAC_BASE + 0x0008)
+#define DMAC_INT_ERR_STAT	(DMAC_BASE + 0x000c)
+#define DMAC_INT_ERR_CLEAR	(DMAC_BASE + 0x0010)
+#define DMAC_SOFT_SREQ		(DMAC_BASE + 0x0024)
+#define DMAC_CONFIG		(DMAC_BASE + 0x0030)
+#define DMAC_Cx_SRC_ADDR(c)	(DMAC_BASE + 0x0100 + (c) * 0x20)
+#define DMAC_Cx_DEST_ADDR(c)	(DMAC_BASE + 0x0104 + (c) * 0x20)
+#define DMAC_Cx_LLI(c)		(DMAC_BASE + 0x0108 + (c) * 0x20)
+#define DMAC_Cx_CONTROL(c)	(DMAC_BASE + 0x010c + (c) * 0x20)
+#define DMAC_Cx_CONFIG(c)	(DMAC_BASE + 0x0110 + (c) * 0x20)
+
+enum {
+	WIDTH_BYTE = 0,
+	WIDTH_HWORD,
+	WIDTH_WORD
+};
+
+enum {
+	FC_MEM2MEM_DMA,
+	FC_MEM2PER_DMA,
+	FC_PER2MEM_DMA,
+	FC_PER2PER_DMA,
+	FC_PER2PER_DPER,
+	FC_MEM2PER_PER,
+	FC_PER2MEM_PER,
+	FC_PER2PER_SPER
+};
+
+enum {
+	DMA_INT_UNKNOWN = 0,
+	DMA_ERR_INT = 1,
+	DMA_TC_INT = 2,
+};
+
+enum {
+	DMA_BUFFER_ALLOCATED = 1,
+	DMA_HAS_LL = 2,
+};
+
+enum {
+	PER_CAM_DMA_1 = 0,
+	PER_NDF_FLASH = 1,
+	PER_MBX_SLAVE_FIFO = 2,
+	PER_SPI2_REC_XMIT = 3,
+	PER_MS_SD_RX_XMIT = 4,
+	PER_HS_UART_1_XMIT = 5,
+	PER_HS_UART_1_RX = 6,
+	PER_HS_UART_2_XMIT = 7,
+	PER_HS_UART_2_RX = 8,
+	PER_HS_UART_7_XMIT = 9,
+	PER_HS_UART_7_RX = 10,
+	PER_SPI1_REC_XMIT = 11,
+	PER_MLC_NDF_SREC = 12,
+	PER_CAM_DMA_2 = 13,
+	PER_PRNG_INFIFO = 14,
+	PER_PRNG_OUTFIFO = 15,
+};
+
+struct pnx4008_dma_ch_ctrl {
+	int tc_mask;
+	int cacheable;
+	int bufferable;
+	int priv_mode;
+	int di;
+	int si;
+	int dest_ahb1;
+	int src_ahb1;
+	int dwidth;
+	int swidth;
+	int dbsize;
+	int sbsize;
+	int tr_size;
+};
+
+struct pnx4008_dma_ch_config {
+	int halt;
+	int active;
+	int lock;
+	int itc;
+	int ie;
+	int flow_cntrl;
+	int dest_per;
+	int src_per;
+};
+
+struct pnx4008_dma_ll {
+	unsigned long src_addr;
+	unsigned long dest_addr;
+	u32 next_dma;
+	unsigned long ch_ctrl;
+	struct pnx4008_dma_ll *next;
+	int flags;
+	void *alloc_data;
+	int (*free) (void *);
+};
+
+struct pnx4008_dma_config {
+	int is_ll;
+	unsigned long src_addr;
+	unsigned long dest_addr;
+	unsigned long ch_ctrl;
+	unsigned long ch_cfg;
+	struct pnx4008_dma_ll *ll;
+	u32 ll_dma;
+	int flags;
+	void *alloc_data;
+	int (*free) (void *);
+};
+
+extern struct pnx4008_dma_ll *pnx4008_alloc_ll_entry(dma_addr_t *);
+extern void pnx4008_free_ll_entry(struct pnx4008_dma_ll *, dma_addr_t);
+extern void pnx4008_free_ll(u32 ll_dma, struct pnx4008_dma_ll *);
+
+extern int pnx4008_request_channel(char *, int,
+				   void (*)(int, int, void *),
+				   void *);
+extern void pnx4008_free_channel(int);
+extern int pnx4008_config_dma(int, int, int);
+extern int pnx4008_dma_pack_control(const struct pnx4008_dma_ch_ctrl *,
+				    unsigned long *);
+extern int pnx4008_dma_parse_control(unsigned long,
+				     struct pnx4008_dma_ch_ctrl *);
+extern int pnx4008_dma_pack_config(const struct pnx4008_dma_ch_config *,
+				   unsigned long *);
+extern int pnx4008_dma_parse_config(unsigned long,
+				    struct pnx4008_dma_ch_config *);
+extern int pnx4008_config_channel(int, struct pnx4008_dma_config *);
+extern int pnx4008_channel_get_config(int, struct pnx4008_dma_config *);
+extern int pnx4008_dma_ch_enable(int);
+extern int pnx4008_dma_ch_disable(int);
+extern int pnx4008_dma_ch_enabled(int);
+extern void pnx4008_dma_split_head_entry(struct pnx4008_dma_config *,
+					 struct pnx4008_dma_ch_ctrl *);
+extern void pnx4008_dma_split_ll_entry(struct pnx4008_dma_ll *,
+				       struct pnx4008_dma_ch_ctrl *);
+
+#endif				/* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
new file mode 100644
index 000000000000..8003037578ed
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for PNX4008-based platforms
+ *
+ * 2005-2006 (c) MontaVista Software, Inc.
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include "platform.h"
+
+#define IO_BASE         0xF0000000
+#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
+
+#define INTRC_MASK			0x00
+#define INTRC_RAW_STAT			0x04
+#define INTRC_STAT			0x08
+#define INTRC_POLAR			0x0C
+#define INTRC_ACT_TYPE			0x10
+#define INTRC_TYPE			0x14
+
+#define SIC1_BASE_INT   32
+#define SIC2_BASE_INT   64
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+/* decode the MIC interrupt numbers */
+		ldr	\base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
+		ldr	\irqstat, [\base, #INTRC_STAT]
+
+		cmp	\irqstat,#1<<16
+		movhs	\irqnr,#16
+		movlo	\irqnr,#0
+		movhs	\irqstat,\irqstat,lsr#16
+		cmp	\irqstat,#1<<8
+		addhs	\irqnr,\irqnr,#8
+		movhs	\irqstat,\irqstat,lsr#8
+		cmp	\irqstat,#1<<4
+		addhs	\irqnr,\irqnr,#4
+		movhs	\irqstat,\irqstat,lsr#4
+		cmp	\irqstat,#1<<2
+		addhs	\irqnr,\irqnr,#2
+		movhs	\irqstat,\irqstat,lsr#2
+		cmp	\irqstat,#1<<1
+		addhs	\irqnr,\irqnr,#1
+
+/* was there an interrupt ? if not then drop out with EQ status */
+		teq	\irqstat,#0
+		beq	1003f
+
+/* and now check for extended IRQ reasons */
+		cmp	\irqnr,#1
+		bls	1003f
+		cmp	\irqnr,#30
+		blo	1002f
+
+/* IRQ 31,30  : High priority cascade IRQ handle */
+/* read the correct SIC */
+/* decoding status after compare : eq is 30 (SIC1) , ne is 31 (SIC2) */
+/* set the base IRQ number */
+		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+		moveq  \irqnr,#SIC1_BASE_INT
+		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+		movne   \irqnr,#SIC2_BASE_INT
+		ldr	\irqstat, [\base, #INTRC_STAT]
+		ldr	\tmp,	  [\base, #INTRC_TYPE]
+/* and with inverted mask : low priority interrupts  */
+		and	\irqstat,\irqstat,\tmp
+		b	1004f
+
+1003:
+/* IRQ 1,0  : Low priority cascade IRQ handle */
+/* read the correct SIC */
+/* decoding status after compare : eq is 1 (SIC2) , ne is 0 (SIC1)*/
+/* read the correct SIC */
+/* set the base IRQ number  */
+		ldrne	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+		movne   \irqnr,#SIC1_BASE_INT
+		ldreq	\base, =IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+		moveq   \irqnr,#SIC2_BASE_INT
+		ldr	\irqstat, [\base, #INTRC_STAT]
+		ldr	\tmp,	  [\base, #INTRC_TYPE]
+/* and with inverted mask : low priority interrupts  */
+		bic	\irqstat,\irqstat,\tmp
+
+1004:
+
+		cmp	\irqstat,#1<<16
+		addhs	\irqnr,\irqnr,#16
+		movhs	\irqstat,\irqstat,lsr#16
+		cmp	\irqstat,#1<<8
+		addhs	\irqnr,\irqnr,#8
+		movhs	\irqstat,\irqstat,lsr#8
+		cmp	\irqstat,#1<<4
+		addhs	\irqnr,\irqnr,#4
+		movhs	\irqstat,\irqstat,lsr#4
+		cmp	\irqstat,#1<<2
+		addhs	\irqnr,\irqnr,#2
+		movhs	\irqstat,\irqstat,lsr#2
+		cmp	\irqstat,#1<<1
+		addhs	\irqnr,\irqnr,#1
+
+
+/* is irqstat not zero */
+
+1002:
+/* we assert that irqstat is not equal to zero and return ne status if true*/
+		teq	\irqstat,#0
+1003:
+		.endm
+
+
+		.macro	irq_prio_table
+		.endm
+
+
diff --git a/arch/arm/mach-pnx4008/include/mach/gpio.h b/arch/arm/mach-pnx4008/include/mach/gpio.h
new file mode 100644
index 000000000000..9591467eb9ec
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/gpio.h
@@ -0,0 +1,241 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/gpio.h
+ *
+ * PNX4008 GPIO driver - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code by Iwo Mergler and Z.Tabaaloute from Philips:
+ * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef _PNX4008_GPIO_H_
+#define _PNX4008_GPIO_H_
+
+
+/* Block numbers */
+#define GPIO_IN		(0)
+#define GPIO_OUT		(0x100)
+#define GPIO_BID		(0x200)
+#define GPIO_RAM		(0x300)
+#define GPIO_MUX		(0x400)
+
+#define GPIO_TYPE_MASK(K) ((K) & 0x700)
+
+/* INPUT GPIOs */
+/* GPI */
+#define GPI_00		(GPIO_IN | 0)
+#define GPI_01		(GPIO_IN | 1)
+#define GPI_02   	(GPIO_IN | 2)
+#define GPI_03 	 	(GPIO_IN | 3)
+#define GPI_04   	(GPIO_IN | 4)
+#define GPI_05   	(GPIO_IN | 5)
+#define GPI_06   	(GPIO_IN | 6)
+#define GPI_07   	(GPIO_IN | 7)
+#define GPI_08   	(GPIO_IN | 8)
+#define GPI_09   	(GPIO_IN | 9)
+#define U1_RX 		(GPIO_IN | 15)
+#define U2_HTCS 	(GPIO_IN | 16)
+#define U2_RX	 	(GPIO_IN | 17)
+#define U3_RX		(GPIO_IN | 18)
+#define U4_RX		(GPIO_IN | 19)
+#define U5_RX		(GPIO_IN | 20)
+#define U6_IRRX 	(GPIO_IN | 21)
+#define U7_HCTS 	(GPIO_IN | 22)
+#define U7_RX		(GPIO_IN | 23)
+/* MISC IN */
+#define SPI1_DATIN	(GPIO_IN | 25)
+#define DISP_SYNC	(GPIO_IN | 26)
+#define SPI2_DATIN	(GPIO_IN | 27)
+#define GPI_11  	(GPIO_IN | 28)
+
+#define GPIO_IN_MASK   0x1eff83ff
+
+/* OUTPUT GPIOs */
+/* GPO */
+#define GPO_00		(GPIO_OUT | 0)
+#define GPO_01   	(GPIO_OUT | 1)
+#define GPO_02   	(GPIO_OUT | 2)
+#define GPO_03 	 	(GPIO_OUT | 3)
+#define GPO_04   	(GPIO_OUT | 4)
+#define GPO_05   	(GPIO_OUT | 5)
+#define GPO_06   	(GPIO_OUT | 6)
+#define GPO_07   	(GPIO_OUT | 7)
+#define GPO_08		(GPIO_OUT | 8)
+#define GPO_09   	(GPIO_OUT | 9)
+#define GPO_10   	(GPIO_OUT | 10)
+#define GPO_11 	 	(GPIO_OUT | 11)
+#define GPO_12   	(GPIO_OUT | 12)
+#define GPO_13   	(GPIO_OUT | 13)
+#define GPO_14   	(GPIO_OUT | 14)
+#define GPO_15   	(GPIO_OUT | 15)
+#define GPO_16  	(GPIO_OUT | 16)
+#define GPO_17 	 	(GPIO_OUT | 17)
+#define GPO_18   	(GPIO_OUT | 18)
+#define GPO_19   	(GPIO_OUT | 19)
+#define GPO_20   	(GPIO_OUT | 20)
+#define GPO_21   	(GPIO_OUT | 21)
+#define GPO_22   	(GPIO_OUT | 22)
+#define GPO_23   	(GPIO_OUT | 23)
+
+#define GPIO_OUT_MASK   0xffffff
+
+/* BIDIRECTIONAL GPIOs */
+/* RAM pins */
+#define RAM_D19		(GPIO_RAM | 0)
+#define RAM_D20  	(GPIO_RAM | 1)
+#define RAM_D21  	(GPIO_RAM | 2)
+#define RAM_D22 	(GPIO_RAM | 3)
+#define RAM_D23  	(GPIO_RAM | 4)
+#define RAM_D24  	(GPIO_RAM | 5)
+#define RAM_D25  	(GPIO_RAM | 6)
+#define RAM_D26  	(GPIO_RAM | 7)
+#define RAM_D27		(GPIO_RAM | 8)
+#define RAM_D28  	(GPIO_RAM | 9)
+#define RAM_D29  	(GPIO_RAM | 10)
+#define RAM_D30 	(GPIO_RAM | 11)
+#define RAM_D31  	(GPIO_RAM | 12)
+
+#define GPIO_RAM_MASK   0x1fff
+
+/* I/O pins */
+#define GPIO_00  	(GPIO_BID | 25)
+#define GPIO_01 	(GPIO_BID | 26)
+#define GPIO_02  	(GPIO_BID | 27)
+#define GPIO_03  	(GPIO_BID | 28)
+#define GPIO_04 	(GPIO_BID | 29)
+#define GPIO_05  	(GPIO_BID | 30)
+
+#define GPIO_BID_MASK   0x7e000000
+
+/* Non-GPIO multiplexed PIOs. For multiplexing with GPIO, please use GPIO macros */
+#define GPIO_SDRAM_SEL 	(GPIO_MUX | 3)
+
+#define GPIO_MUX_MASK   0x8
+
+/* Extraction/assembly macros */
+#define GPIO_BIT_MASK(K) ((K) & 0x1F)
+#define GPIO_BIT(K) (1 << GPIO_BIT_MASK(K))
+#define GPIO_ISMUX(K) ((GPIO_TYPE_MASK(K) == GPIO_MUX) && (GPIO_BIT(K) & GPIO_MUX_MASK))
+#define GPIO_ISRAM(K) ((GPIO_TYPE_MASK(K) == GPIO_RAM) && (GPIO_BIT(K) & GPIO_RAM_MASK))
+#define GPIO_ISBID(K) ((GPIO_TYPE_MASK(K) == GPIO_BID) && (GPIO_BIT(K) & GPIO_BID_MASK))
+#define GPIO_ISOUT(K) ((GPIO_TYPE_MASK(K) == GPIO_OUT) && (GPIO_BIT(K) & GPIO_OUT_MASK))
+#define GPIO_ISIN(K)  ((GPIO_TYPE_MASK(K) == GPIO_IN) && (GPIO_BIT(K) & GPIO_IN_MASK))
+
+/* Start Enable Pin Interrupts - table 58 page 66 */
+
+#define SE_PIN_BASE_INT   32
+
+#define SE_U7_RX_INT            63
+#define SE_U7_HCTS_INT          62
+#define SE_BT_CLKREQ_INT        61
+#define SE_U6_IRRX_INT          60
+/*59 unused*/
+#define SE_U5_RX_INT            58
+#define SE_GPI_11_INT           57
+#define SE_U3_RX_INT            56
+#define SE_U2_HCTS_INT          55
+#define SE_U2_RX_INT            54
+#define SE_U1_RX_INT            53
+#define SE_DISP_SYNC_INT        52
+/*51 unused*/
+#define SE_SDIO_INT_N           50
+#define SE_MSDIO_START_INT      49
+#define SE_GPI_06_INT           48
+#define SE_GPI_05_INT           47
+#define SE_GPI_04_INT           46
+#define SE_GPI_03_INT           45
+#define SE_GPI_02_INT           44
+#define SE_GPI_01_INT           43
+#define SE_GPI_00_INT           42
+#define SE_SYSCLKEN_PIN_INT     41
+#define SE_SPI1_DATAIN_INT      40
+#define SE_GPI_07_INT           39
+#define SE_SPI2_DATAIN_INT      38
+#define SE_GPI_10_INT           37
+#define SE_GPI_09_INT           36
+#define SE_GPI_08_INT           35
+/*34-32 unused*/
+
+/* Start Enable Internal Interrupts - table 57 page 65 */
+
+#define SE_INT_BASE_INT   0
+
+#define SE_TS_IRQ               31
+#define SE_TS_P_INT             30
+#define SE_TS_AUX_INT           29
+/*27-28 unused*/
+#define SE_USB_AHB_NEED_CLK_INT 26
+#define SE_MSTIMER_INT          25
+#define SE_RTC_INT              24
+#define SE_USB_NEED_CLK_INT     23
+#define SE_USB_INT              22
+#define SE_USB_I2C_INT          21
+#define SE_USB_OTG_TIMER_INT    20
+#define SE_USB_OTG_ATX_INT_N    19
+/*18 unused*/
+#define SE_DSP_GPIO4_INT        17
+#define SE_KEY_IRQ              16
+#define SE_DSP_SLAVEPORT_INT    15
+#define SE_DSP_GPIO1_INT        14
+#define SE_DSP_GPIO0_INT        13
+#define SE_DSP_AHB_INT          12
+/*11-6 unused*/
+#define SE_GPIO_05_INT          5
+#define SE_GPIO_04_INT          4
+#define SE_GPIO_03_INT          3
+#define SE_GPIO_02_INT          2
+#define SE_GPIO_01_INT          1
+#define SE_GPIO_00_INT          0
+
+#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
+
+#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
+
+extern int pnx4008_gpio_register_pin(unsigned short pin);
+extern int pnx4008_gpio_unregister_pin(unsigned short pin);
+extern unsigned long pnx4008_gpio_read_pin(unsigned short pin);
+extern int pnx4008_gpio_write_pin(unsigned short pin, int output);
+extern int pnx4008_gpio_set_pin_direction(unsigned short pin, int output);
+extern int pnx4008_gpio_read_pin_direction(unsigned short pin);
+extern int pnx4008_gpio_set_pin_mux(unsigned short pin, int output);
+extern int pnx4008_gpio_read_pin_mux(unsigned short pin);
+
+static inline void start_int_umask(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) |
+		     START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_mask(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_ER_REG(irq)) &
+		     ~START_INT_REG_BIT(irq), START_INT_ER_REG(irq));
+}
+
+static inline void start_int_ack(u8 irq)
+{
+	__raw_writel(START_INT_REG_BIT(irq), START_INT_RSR_REG(irq));
+}
+
+static inline void start_int_set_falling_edge(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) &
+		     ~START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
+static inline void start_int_set_rising_edge(u8 irq)
+{
+	__raw_writel(__raw_readl(START_INT_APR_REG(irq)) |
+		     START_INT_REG_BIT(irq), START_INT_APR_REG(irq));
+}
+
+#endif				/* _PNX4008_GPIO_H_ */
diff --git a/arch/arm/mach-pnx4008/include/mach/hardware.h b/arch/arm/mach-pnx4008/include/mach/hardware.h
new file mode 100644
index 000000000000..7b98b828d368
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/hardware.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/hardware.h
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/platform.h>
+
+/* Start of virtual addresses for IO devices */
+#define IO_BASE         0xF0000000
+
+/* This macro relies on fact that for all HW i/o addresses bits 20-23 are 0 */
+#define IO_ADDRESS(x)  (((((x) & 0xff000000) >> 4) | ((x) & 0xfffff)) | IO_BASE)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/i2c.h b/arch/arm/mach-pnx4008/include/mach/i2c.h
new file mode 100644
index 000000000000..259ac53abf40
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/i2c.h
@@ -0,0 +1,64 @@
+/*
+ * PNX4008-specific tweaks for I2C IP3204 block
+ *
+ * Author: Vitaly Wool <vwool@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_I2C_H__
+#define __ASM_ARCH_I2C_H__
+
+enum {
+	mstatus_tdi = 0x00000001,
+	mstatus_afi = 0x00000002,
+	mstatus_nai = 0x00000004,
+	mstatus_drmi = 0x00000008,
+	mstatus_active = 0x00000020,
+	mstatus_scl = 0x00000040,
+	mstatus_sda = 0x00000080,
+	mstatus_rff = 0x00000100,
+	mstatus_rfe = 0x00000200,
+	mstatus_tff = 0x00000400,
+	mstatus_tfe = 0x00000800,
+};
+
+enum {
+	mcntrl_tdie = 0x00000001,
+	mcntrl_afie = 0x00000002,
+	mcntrl_naie = 0x00000004,
+	mcntrl_drmie = 0x00000008,
+	mcntrl_daie = 0x00000020,
+	mcntrl_rffie = 0x00000040,
+	mcntrl_tffie = 0x00000080,
+	mcntrl_reset = 0x00000100,
+	mcntrl_cdbmode = 0x00000400,
+};
+
+enum {
+	rw_bit = 1 << 0,
+	start_bit = 1 << 8,
+	stop_bit = 1 << 9,
+};
+
+#define I2C_REG_RX(a)	((a)->ioaddr)		/* Rx FIFO reg (RO) */
+#define I2C_REG_TX(a)	((a)->ioaddr)		/* Tx FIFO reg (WO) */
+#define I2C_REG_STS(a)	((a)->ioaddr + 0x04)	/* Status reg (RO) */
+#define I2C_REG_CTL(a)	((a)->ioaddr + 0x08)	/* Ctl reg */
+#define I2C_REG_CKL(a)	((a)->ioaddr + 0x0c)	/* Clock divider low */
+#define I2C_REG_CKH(a)	((a)->ioaddr + 0x10)	/* Clock divider high */
+#define I2C_REG_ADR(a)	((a)->ioaddr + 0x14)	/* I2C address */
+#define I2C_REG_RFL(a)	((a)->ioaddr + 0x18)	/* Rx FIFO level (RO) */
+#define I2C_REG_TFL(a)	((a)->ioaddr + 0x1c)	/* Tx FIFO level (RO) */
+#define I2C_REG_RXB(a)	((a)->ioaddr + 0x20)	/* Num of bytes Rx-ed (RO) */
+#define I2C_REG_TXB(a)	((a)->ioaddr + 0x24)	/* Num of bytes Tx-ed (RO) */
+#define I2C_REG_TXS(a)	((a)->ioaddr + 0x28)	/* Tx slave FIFO (RO) */
+#define I2C_REG_STFL(a)	((a)->ioaddr + 0x2c)	/* Tx slave FIFO level (RO) */
+
+#define HCLK_MHZ		13
+#define I2C_CHIP_NAME		"PNX4008-I2C"
+
+#endif				/* __ASM_ARCH_I2C_H___ */
diff --git a/arch/arm/mach-pnx4008/include/mach/io.h b/arch/arm/mach-pnx4008/include/mach/io.h
new file mode 100644
index 000000000000..c6206f25839d
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/io.h
@@ -0,0 +1,21 @@
+
+/*
+ *  arch/arm/mach-pnx4008/include/mach/io.h
+ *
+ * Author: Dmitry Chigirev <chigirev@ru.mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/irq.h b/arch/arm/mach-pnx4008/include/mach/irq.h
new file mode 100644
index 000000000000..2a690ca33870
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/irq.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/irq.h
+ *
+ * PNX4008 IRQ controller driver - header file
+ * this one is used in entry-arnv.S as well so it cannot contain C code
+ *
+ * Copyright (c) 2005 Philips Semiconductors
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+#ifndef __PNX4008_IRQ_H__
+#define __PNX4008_IRQ_H__
+
+#define MIC_VA_BASE             IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
+#define SIC1_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC1_BASE)
+#define SIC2_VA_BASE            IO_ADDRESS(PNX4008_INTCTRLSIC2_BASE)
+
+/* Manual: Chapter 20, page 195 */
+
+#define INTC_BIT(irq) (1<< ((irq) & 0x1F))
+
+#define INTC_ER(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x0 + (((irq)&(0x3<<5))<<9)))
+#define INTC_RSR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x4 + (((irq)&(0x3<<5))<<9)))
+#define INTC_SR(irq)    IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x8 + (((irq)&(0x3<<5))<<9)))
+#define INTC_APR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0xC + (((irq)&(0x3<<5))<<9)))
+#define INTC_ATR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x10 + (((irq)&(0x3<<5))<<9)))
+#define INTC_ITR(irq)   IO_ADDRESS((PNX4008_INTCTRLMIC_BASE + 0x14 + (((irq)&(0x3<<5))<<9)))
+
+#define START_INT_REG_BIT(irq) (1<<((irq)&0x1F))
+
+#define START_INT_ER_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x20 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_RSR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x24 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_SR_REG(irq)     IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x28 + (((irq)&(0x1<<5))>>1)))
+#define START_INT_APR_REG(irq)    IO_ADDRESS((PNX4008_PWRMAN_BASE + 0x2C + (((irq)&(0x1<<5))>>1)))
+
+extern void __init pnx4008_init_irq(void);
+
+#endif /* __PNX4008_IRQ_H__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/irqs.h b/arch/arm/mach-pnx4008/include/mach/irqs.h
new file mode 100644
index 000000000000..f6b33cf23ae2
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/irqs.h
@@ -0,0 +1,215 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/irqs.h
+ *
+ * PNX4008 IRQ controller driver - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __PNX4008_IRQS_h__
+#define __PNX4008_IRQS_h__
+
+#define NR_IRQS         96
+
+/*Manual: table 259, page 199*/
+
+/*SUB2 Interrupt Routing (SIC2)*/
+
+#define SIC2_BASE_INT   64
+
+#define CLK_SWITCH_ARM_INT 95	/*manual: Clkswitch ARM  */
+#define CLK_SWITCH_DSP_INT 94	/*manual: ClkSwitch DSP  */
+#define CLK_SWITCH_AUD_INT 93	/*manual: Clkswitch AUD  */
+#define GPI_06_INT         92
+#define GPI_05_INT         91
+#define GPI_04_INT         90
+#define GPI_03_INT         89
+#define GPI_02_INT         88
+#define GPI_01_INT         87
+#define GPI_00_INT         86
+#define BT_CLKREQ_INT      85
+#define SPI1_DATIN_INT     84
+#define U5_RX_INT          83
+#define SDIO_INT_N         82
+#define CAM_HS_INT         81
+#define CAM_VS_INT         80
+#define GPI_07_INT         79
+#define DISP_SYNC_INT      78
+#define DSP_INT8           77
+#define U7_HCTS_INT        76
+#define GPI_10_INT         75
+#define GPI_09_INT         74
+#define GPI_08_INT         73
+#define DSP_INT7           72
+#define U2_HCTS_INT        71
+#define SPI2_DATIN_INT     70
+#define GPIO_05_INT        69
+#define GPIO_04_INT        68
+#define GPIO_03_INT        67
+#define GPIO_02_INT        66
+#define GPIO_01_INT        65
+#define GPIO_00_INT        64
+
+/*Manual: table 258, page 198*/
+
+/*SUB1 Interrupt Routing (SIC1)*/
+
+#define SIC1_BASE_INT   32
+
+#define USB_I2C_INT        63
+#define USB_DEV_HP_INT     62
+#define USB_DEV_LP_INT     61
+#define USB_DEV_DMA_INT    60
+#define USB_HOST_INT       59
+#define USB_OTG_ATX_INT_N  58
+#define USB_OTG_TIMER_INT  57
+#define SW_INT             56
+#define SPI1_INT           55
+#define KEY_IRQ            54
+#define DSP_M_INT          53
+#define RTC_INT            52
+#define I2C_1_INT          51
+#define I2C_2_INT          50
+#define PLL1_LOCK_INT      49
+#define PLL2_LOCK_INT      48
+#define PLL3_LOCK_INT      47
+#define PLL4_LOCK_INT      46
+#define PLL5_LOCK_INT      45
+#define SPI2_INT           44
+#define DSP_INT1           43
+#define DSP_INT2           42
+#define DSP_TDM_INT2       41
+#define TS_AUX_INT         40
+#define TS_IRQ             39
+#define TS_P_INT           38
+#define UOUT1_TO_PAD_INT   37
+#define GPI_11_INT         36
+#define DSP_INT4           35
+#define JTAG_COMM_RX_INT   34
+#define JTAG_COMM_TX_INT   33
+#define DSP_INT3           32
+
+/*Manual: table 257, page 197*/
+
+/*MAIN Interrupt Routing*/
+
+#define MAIN_BASE_INT   0
+
+#define SUB2_FIQ_N         31	/*active low */
+#define SUB1_FIQ_N         30	/*active low */
+#define JPEG_INT           29
+#define DMA_INT            28
+#define MSTIMER_INT        27
+#define IIR1_INT           26
+#define IIR2_INT           25
+#define IIR7_INT           24
+#define DSP_TDM_INT0       23
+#define DSP_TDM_INT1       22
+#define DSP_P_INT          21
+#define DSP_INT0           20
+#define DUM_INT            19
+#define UOUT0_TO_PAD_INT   18
+#define MP4_ENC_INT        17
+#define MP4_DEC_INT        16
+#define SD0_INT            15
+#define MBX_INT            14
+#define SD1_INT            13
+#define MS_INT_N           12
+#define FLASH_INT          11 /*NAND*/
+#define IIR6_INT           10
+#define IIR5_INT           9
+#define IIR4_INT           8
+#define IIR3_INT           7
+#define WATCH_INT          6
+#define HSTIMER_INT        5
+#define ARCH_TIMER_IRQ     HSTIMER_INT
+#define CAM_INT            4
+#define PRNG_INT           3
+#define CRYPTO_INT         2
+#define SUB2_IRQ_N         1	/*active low */
+#define SUB1_IRQ_N         0	/*active low */
+
+#define PNX4008_IRQ_TYPES \
+{                                           /*IRQ #'s: */         \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /*  0, 1, 2, 3 */     \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  4, 5, 6, 7 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /*  8, 9,10,11 */     \
+IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 12,13,14,15 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 16,17,18,19 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 20,21,22,23 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 24,25,26,27 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 28,29,30,31 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 32,33,34,35 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_FALLING, IRQ_TYPE_LEVEL_HIGH, /* 36,37,38,39 */  \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 40,41,42,43 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 44,45,46,47 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_LOW,  /* 48,49,50,51 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 52,53,54,55 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_LOW,  IRQ_TYPE_LEVEL_HIGH, /* 56,57,58,59 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 60,61,62,63 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 64,65,66,67 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 68,69,70,71 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 72,73,74,75 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 76,77,78,79 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 80,81,82,83 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 84,85,86,87 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 88,89,90,91 */     \
+IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_LEVEL_HIGH, /* 92,93,94,95 */     \
+}
+
+/* Start Enable Pin Interrupts - table 58 page 66 */
+
+#define SE_PIN_BASE_INT   32
+
+#define SE_U7_RX_INT            63
+#define SE_U7_HCTS_INT          62
+#define SE_BT_CLKREQ_INT        61
+#define SE_U6_IRRX_INT          60
+/*59 unused*/
+#define SE_U5_RX_INT            58
+#define SE_GPI_11_INT           57
+#define SE_U3_RX_INT            56
+#define SE_U2_HCTS_INT          55
+#define SE_U2_RX_INT            54
+#define SE_U1_RX_INT            53
+#define SE_DISP_SYNC_INT        52
+/*51 unused*/
+#define SE_SDIO_INT_N           50
+#define SE_MSDIO_START_INT      49
+#define SE_GPI_06_INT           48
+#define SE_GPI_05_INT           47
+#define SE_GPI_04_INT           46
+#define SE_GPI_03_INT           45
+#define SE_GPI_02_INT           44
+#define SE_GPI_01_INT           43
+#define SE_GPI_00_INT           42
+#define SE_SYSCLKEN_PIN_INT     41
+#define SE_SPI1_DATAIN_INT      40
+#define SE_GPI_07_INT           39
+#define SE_SPI2_DATAIN_INT      38
+#define SE_GPI_10_INT           37
+#define SE_GPI_09_INT           36
+#define SE_GPI_08_INT           35
+/*34-32 unused*/
+
+/* Start Enable Internal Interrupts - table 57 page 65 */
+
+#define SE_INT_BASE_INT   0
+
+#define SE_TS_IRQ               31
+#define SE_TS_P_INT             30
+#define SE_TS_AUX_INT           29
+/*27-28 unused*/
+#define SE_USB_AHB_NEED_CLK_INT 26
+#define SE_MSTIMER_INT          25
+#define SE_RTC_INT              24
+#define SE_USB_NEED_CLK_INT     23
+#define SE_USB_INT              22
+#define SE_USB_I2C_INT          21
+#define SE_USB_OTG_TIMER_INT    20
+
+#endif /* __PNX4008_IRQS_h__ */
diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h
new file mode 100644
index 000000000000..5789a2d16f5a
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/memory.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/memory.h
+ *
+ * Copyright (c) 2005 Philips Semiconductors
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET     (0x80000000)
+
+#define __virt_to_bus(x) ((x) - PAGE_OFFSET + PHYS_OFFSET)
+#define __bus_to_virt(x) ((x) + PAGE_OFFSET - PHYS_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/param.h b/arch/arm/mach-pnx4008/include/mach/param.h
new file mode 100644
index 000000000000..6ea02f2176b7
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/param.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-pnx4008/include/mach/param.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define HZ 100
diff --git a/arch/arm/mach-pnx4008/include/mach/platform.h b/arch/arm/mach-pnx4008/include/mach/platform.h
new file mode 100644
index 000000000000..368c2c10a308
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/platform.h
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/platform.h
+ *
+ * PNX4008 Base addresses - header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * Based on reference code received from Philips:
+ * Copyright (C) 2003 Philips Semiconductors
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+
+#ifndef __ASM_ARCH_PLATFORM_H__
+#define __ASM_ARCH_PLATFORM_H__
+
+#define PNX4008_IRAM_BASE		0x08000000
+#define PNX4008_IRAM_SIZE		0x00010000
+#define PNX4008_YUV_SLAVE_BASE		0x10000000
+#define PNX4008_DUM_SLAVE_BASE		0x18000000
+#define PNX4008_NDF_FLASH_BASE		0x20020000
+#define PNX4008_SPI1_BASE		0x20088000
+#define PNX4008_SPI2_BASE		0x20090000
+#define PNX4008_SD_CONFIG_BASE		0x20098000
+#define PNX4008_FLASH_DATA		0x200B0000
+#define PNX4008_MLC_FLASH_BASE		0x200B8000
+#define PNX4008_JPEG_CONFIG_BASE	0x300A0000
+#define PNX4008_DMA_CONFIG_BASE		0x31000000
+#define PNX4008_USB_CONFIG_BASE		0x31020000
+#define PNX4008_SDRAM_CFG_BASE		0x31080000
+#define PNX4008_AHB2FAB_BASE		0x40000000
+#define PNX4008_PWRMAN_BASE		0x40004000
+#define PNX4008_INTCTRLMIC_BASE		0x40008000
+#define PNX4008_INTCTRLSIC1_BASE	0x4000C000
+#define PNX4008_INTCTRLSIC2_BASE	0x40010000
+#define PNX4008_HSUART1_BASE		0x40014000
+#define PNX4008_HSUART2_BASE		0x40018000
+#define PNX4008_HSUART7_BASE		0x4001C000
+#define PNX4008_RTC_BASE		0x40024000
+#define PNX4008_PIO_BASE		0x40028000
+#define PNX4008_MSTIMER_BASE		0x40034000
+#define PNX4008_HSTIMER_BASE		0x40038000
+#define PNX4008_WDOG_BASE		0x4003C000
+#define PNX4008_DEBUG_BASE		0x40040000
+#define PNX4008_TOUCH1_BASE		0x40048000
+#define PNX4008_KEYSCAN_BASE		0x40050000
+#define PNX4008_UARTCTRL_BASE		0x40054000
+#define PNX4008_PWM_BASE		0x4005C000
+#define PNX4008_UART3_BASE		0x40080000
+#define PNX4008_UART4_BASE		0x40088000
+#define PNX4008_UART5_BASE		0x40090000
+#define PNX4008_UART6_BASE		0x40098000
+#define PNX4008_I2C1_BASE		0x400A0000
+#define PNX4008_I2C2_BASE		0x400A8000
+#define PNX4008_MAGICGATE_BASE		0x400B0000
+#define PNX4008_DUMCONF_BASE		0x400B8000
+#define PNX4008_DUM_MAINCFG_BASE       	0x400BC000
+#define PNX4008_DSP_BASE		0x400C0000
+#define PNX4008_PROFCOUNTER_BASE	0x400C8000
+#define PNX4008_CRYPTO_BASE		0x400D0000
+#define PNX4008_CAMIFCONF_BASE		0x400D8000
+#define PNX4008_YUV2RGB_BASE		0x400E0000
+#define PNX4008_AUDIOCONFIG_BASE	0x400E8000
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/pm.h b/arch/arm/mach-pnx4008/include/mach/pm.h
new file mode 100644
index 000000000000..2fa685bff858
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/pm.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/pm.h
+ *
+ * PNX4008 Power Management Routiness - header file
+ *
+ * Authors: Vitaly Wool, Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_ARCH_PNX4008_PM_H
+#define __ASM_ARCH_PNX4008_PM_H
+
+#ifndef __ASSEMBLER__
+#include "irq.h"
+#include "irqs.h"
+#include "clock.h"
+
+extern void pnx4008_pm_idle(void);
+extern void pnx4008_pm_suspend(void);
+extern unsigned int pnx4008_cpu_suspend_sz;
+extern void pnx4008_cpu_suspend(void);
+extern unsigned int pnx4008_cpu_standby_sz;
+extern void pnx4008_cpu_standby(void);
+
+extern int pnx4008_startup_pll(struct clk *);
+extern int pnx4008_shutdown_pll(struct clk *);
+
+#endif				/* ASSEMBLER */
+#endif				/* __ASM_ARCH_PNX4008_PM_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
new file mode 100644
index 000000000000..8985a4622b8c
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/system.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/system.h
+ *
+ * Copyright (C) 2003 Philips Semiconductors
+ * Copyright (C) 2005 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/platform.h>
+
+static void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/timex.h b/arch/arm/mach-pnx4008/include/mach/timex.h
new file mode 100644
index 000000000000..956fbd8e977c
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/timex.h
@@ -0,0 +1,73 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/timex.h
+ *
+ * PNX4008 timers header file
+ *
+ * Author: Dmitry Chigirev <source@mvista.com>
+ *
+ * 2005 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __PNX4008_TIMEX_H
+#define __PNX4008_TIMEX_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#define CLOCK_TICK_RATE		1000000
+
+#define TICKS2USECS(x)	(x)
+
+/* MilliSecond Timer - Chapter 21 Page 202 */
+
+#define MSTIM_INT     IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x0))
+#define MSTIM_CTRL    IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x4))
+#define MSTIM_COUNTER IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x8))
+#define MSTIM_MCTRL   IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x14))
+#define MSTIM_MATCH0  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x18))
+#define MSTIM_MATCH1  IO_ADDRESS((PNX4008_MSTIMER_BASE + 0x1c))
+
+/* High Speed Timer - Chpater 22, Page 205 */
+
+#define HSTIM_INT     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x0))
+#define HSTIM_CTRL    IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x4))
+#define HSTIM_COUNTER IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x8))
+#define HSTIM_PMATCH  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0xC))
+#define HSTIM_PCOUNT  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x10))
+#define HSTIM_MCTRL   IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x14))
+#define HSTIM_MATCH0  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x18))
+#define HSTIM_MATCH1  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x1c))
+#define HSTIM_MATCH2  IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x20))
+#define HSTIM_CCR     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x28))
+#define HSTIM_CR0     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x2C))
+#define HSTIM_CR1     IO_ADDRESS((PNX4008_HSTIMER_BASE + 0x30))
+
+/* IMPORTANT: both timers are UPCOUNTING */
+
+/* xSTIM_MCTRL bit definitions */
+#define MR0_INT        1
+#define RESET_COUNT0   (1<<1)
+#define STOP_COUNT0    (1<<2)
+#define MR1_INT        (1<<3)
+#define RESET_COUNT1   (1<<4)
+#define STOP_COUNT1    (1<<5)
+#define MR2_INT        (1<<6)
+#define RESET_COUNT2   (1<<7)
+#define STOP_COUNT2    (1<<8)
+
+/* xSTIM_CTRL bit definitions */
+#define COUNT_ENAB     1
+#define RESET_COUNT    (1<<1)
+#define DEBUG_EN       (1<<2)
+
+/* xSTIM_INT bit definitions */
+#define MATCH0_INT     1
+#define MATCH1_INT     (1<<1)
+#define MATCH2_INT     (1<<2)
+#define RTC_TICK0      (1<<4)
+#define RTC_TICK1      (1<<5)
+
+#endif
diff --git a/arch/arm/mach-pnx4008/include/mach/uncompress.h b/arch/arm/mach-pnx4008/include/mach/uncompress.h
new file mode 100644
index 000000000000..bb4751ee2539
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-pnx4008/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2006 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define UART5_BASE 0x40090000
+
+#define UART5_DR    (*(volatile unsigned char *) (UART5_BASE))
+#define UART5_FR    (*(volatile unsigned char *) (UART5_BASE + 18))
+
+static __inline__ void putc(char c)
+{
+	while (UART5_FR & (1 << 5))
+		barrier();
+
+	UART5_DR = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pnx4008/include/mach/vmalloc.h b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
new file mode 100644
index 000000000000..2ad398378aed
--- /dev/null
+++ b/arch/arm/mach-pnx4008/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-pnx4008/include/mach/vmalloc.h
+ *
+ * Author: Vitaly Wool <source@mvista.com>
+ *
+ * 2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c
index 968d0b027597..5c4f55af5d4b 100644
--- a/arch/arm/mach-pnx4008/irq.c
+++ b/arch/arm/mach-pnx4008/irq.c
@@ -23,17 +23,16 @@
 #include <linux/ioport.h>
 #include <linux/device.h>
 #include <linux/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
-#include <asm/mach-types.h>
 #include <asm/pgtable.h>
 #include <asm/page.h>
 #include <asm/system.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/arch/irq.h>
+#include <mach/irq.h>
 
 static u8 pnx4008_irq_type[NR_IRQS] = PNX4008_IRQ_TYPES;
 
@@ -56,28 +55,28 @@ static void pnx4008_mask_ack_irq(unsigned int irq)
 static int pnx4008_set_irq_type(unsigned int irq, unsigned int type)
 {
 	switch (type) {
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq));	/*edge sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq));	/*rising edge */
 		set_irq_handler(irq, handle_edge_irq);
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq));	/*edge sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq));	/*falling edge */
 		set_irq_handler(irq, handle_edge_irq);
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq));	/*level sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq));	/*low level */
 		set_irq_handler(irq, handle_level_irq);
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		__raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq));	/*level sensitive */
 		__raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq));	/* high level */
 		set_irq_handler(irq, handle_level_irq);
 		break;
 
-	/* IRQT_BOTHEDGE is not supported */
+	/* IRQ_TYPE_EDGE_BOTH is not supported */
 	default:
 		printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type);
 		return -1;
diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c
index 40116d254349..f970906d8848 100644
--- a/arch/arm/mach-pnx4008/pm.c
+++ b/arch/arm/mach-pnx4008/pm.c
@@ -20,10 +20,9 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/mach-types.h>
 #include <asm/cacheflush.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/clock.h>
+#include <mach/pm.h>
+#include <mach/clock.h>
 
 #define SRAM_VA IO_ADDRESS(PNX4008_IRAM_BASE)
 
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
index 95a1b3f964a2..9be84bbb30e8 100644
--- a/arch/arm/mach-pnx4008/serial.c
+++ b/arch/arm/mach-pnx4008/serial.c
@@ -15,14 +15,14 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/platform.h>
-#include <asm/hardware.h>
+#include <mach/platform.h>
+#include <mach/hardware.h>
 
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
-#include <asm/arch/gpio.h>
+#include <mach/gpio.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 #define UART_3		0
 #define UART_4		1
diff --git a/arch/arm/mach-pnx4008/sleep.S b/arch/arm/mach-pnx4008/sleep.S
index fea1e17a3650..f4eed495d295 100644
--- a/arch/arm/mach-pnx4008/sleep.S
+++ b/arch/arm/mach-pnx4008/sleep.S
@@ -13,7 +13,7 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define PWRMAN_VA_BASE IO_ADDRESS(PNX4008_PWRMAN_BASE)
 #define PWR_CTRL_REG_OFFS 0x44
diff --git a/arch/arm/mach-pnx4008/time.c b/arch/arm/mach-pnx4008/time.c
index 6d4ca8fc0cb4..180975244f96 100644
--- a/arch/arm/mach-pnx4008/time.c
+++ b/arch/arm/mach-pnx4008/time.c
@@ -24,7 +24,7 @@
 #include <linux/irq.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/leds.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 914bb33dab92..e8ee7ec9ff6d 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -16,18 +16,24 @@ config CPU_PXA310
 config CPU_PXA320
 	bool "PXA320 (codename Monahans-P)"
 
+config CPU_PXA930
+	bool "PXA930 (codename Tavor-P)"
+
 endmenu
 
 endif
 
-menu "Select target boards"
-
 config ARCH_GUMSTIX
 	bool "Gumstix XScale boards"
 	help
 	  Say Y here if you intend to run this kernel on a
 	  Gumstix Full Function Minature Computer.
 
+config MACH_GUMSTIX_F
+	bool "Basix, Connex, ws-200ax, ws-400ax systems"
+	depends on ARCH_GUMSTIX
+	select PXA25x
+
 config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform"
 	select PXA25x
@@ -58,6 +64,57 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
+config MACH_POODLE
+	bool "Enable Sharp SL-5600 (Poodle) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select SHARP_LOCOMO
+	select PXA_SSP
+
+config MACH_CORGI
+	bool "Enable Sharp SL-C700 (Corgi) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_SHEPHERD
+	bool "Enable Sharp SL-C750 (Shepherd) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_HUSKY
+	bool "Enable Sharp SL-C760 (Husky) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_AKITA
+	bool "Enable Sharp SL-1000 (Akita) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+	select MACH_SPITZ
+	select I2C
+	select I2C_PXA
+
+config MACH_SPITZ
+	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_BORZOI
+	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+	bool "Enable Sharp SL-6000x (Tosa) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
@@ -70,10 +127,19 @@ config MACH_E330
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e330 family PDA.
 
+config MACH_E350
+	bool "Toshiba e350"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e350 family PDA.
+
 config MACH_E740
 	bool "Toshiba e740"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e740 family PDA.
@@ -82,6 +148,7 @@ config MACH_E750
 	bool "Toshiba e750"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e750 family PDA.
@@ -98,6 +165,7 @@ config MACH_E800
 	bool "Toshiba e800"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e800 family PDA.
@@ -106,6 +174,10 @@ config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
 	select PXA27x
 
+config MACH_TRIZEPS4_CONXS
+	bool "ConXS Eval Board"
+	depends on MACH_TRIZEPS4
+
 config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
 	select PXA27x
@@ -115,7 +187,7 @@ config MACH_COLIBRI
 	select PXA27x
 
 config MACH_ZYLONITE
-	bool "PXA3xx Development Platform"
+	bool "PXA3xx Development Platform (aka Zylonite)"
 	select PXA3xx
 	select HAVE_PWM
 
@@ -124,6 +196,16 @@ config MACH_LITTLETON
 	select PXA3xx
 	select PXA_SSP
 
+config MACH_TAVOREVB
+	bool "PXA930 Evaluation Board (aka TavorEVB)"
+	select PXA3xx
+	select PXA930
+
+config MACH_SAAR
+	bool "PXA930 Handheld Platform (aka SAAR)"
+	select PXA3xx
+	select PXA930
+
 config MACH_ARMCORE
 	bool "CompuLab CM-X270 modules"
 	select PXA27x
@@ -131,7 +213,6 @@ config MACH_ARMCORE
 
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
-	depends on ARCH_PXA
 	select PXA27x
 	select IWMMXT
 
@@ -139,18 +220,26 @@ config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
 	select IWMMXT
+	select PXA_SSP
 
-endmenu
+config ARCH_PXA_PALM
+	bool "PXA based Palm PDAs"
+	select HAVE_PWM
 
-choice
-	prompt "Used baseboard"
-	depends on MACH_PCM027
+config MACH_PALMTX
+	bool "Palm T|X"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Palm T|X
+	  handheld computer.
 
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
 	select HAVE_PWM
-
-endchoice
+	depends on MACH_PCM027
 
 choice
 	prompt "display on pcm990"
@@ -167,88 +256,45 @@ config PCM990_DISPLAY_NONE
 
 endchoice
 
-if ARCH_GUMSTIX
-
-choice
-	prompt "Select target Gumstix board"
-
-config MACH_GUMSTIX_F
-	bool "Basix, Connex, ws-200ax, ws-400ax systems"
-	select PXA25x
-
-endchoice
-
-endif
 
+config PXA_EZX
+	bool "Motorola EZX Platform"
+	select PXA27x
+	select IWMMXT
+	select HAVE_PWM
 
-if MACH_TRIZEPS4
+config MACH_EZX_A780
+	bool "Motorola EZX A780"
+	default y
+	depends on PXA_EZX
 
-choice
-	prompt "Select base board for Trizeps 4 module"
+config MACH_EZX_E680
+	bool "Motorola EZX E680"
+	default y
+	depends on PXA_EZX
 
-config MACH_TRIZEPS4_CONXS
-	bool "ConXS Eval Board"
+config MACH_EZX_A1200
+	bool "Motorola EZX A1200"
+	default y
+	depends on PXA_EZX
 
-config MACH_TRIZEPS4_ANY
-	bool "another Board"
+config MACH_EZX_A910
+	bool "Motorola EZX A910"
+	default y
+	depends on PXA_EZX
 
-endchoice
+config MACH_EZX_E6
+	bool "Motorola EZX E6"
+	default y
+	depends on PXA_EZX
 
-endif
+config MACH_EZX_E2
+	bool "Motorola EZX E2"
+	default y
+	depends on PXA_EZX
 
 endmenu
 
-config MACH_POODLE
-	bool "Enable Sharp SL-5600 (Poodle) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select SHARP_LOCOMO
-	select PXA_SSP
-
-config MACH_CORGI
-	bool "Enable Sharp SL-C700 (Corgi) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-	bool "Enable Sharp SL-C750 (Shepherd) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-	bool "Enable Sharp SL-C760 (Husky) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_AKITA
-	bool "Enable Sharp SL-1000 (Akita) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-	select MACH_SPITZ
-	select I2C
-	select I2C_PXA
-
-config MACH_SPITZ
-	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-
-config MACH_BORZOI
-	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-
-config MACH_TOSA
-	bool "Enable Sharp SL-6000x (Tosa) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-
 config PXA25x
 	bool
 	help
@@ -288,4 +334,13 @@ config PXA_PWM
 	default BACKLIGHT_PWM
 	help
 	  Enable support for PXA2xx/PXA3xx PWM controllers
+
+config TOSA_BT
+	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+	depends on MACH_TOSA
+	select RFKILL
+	help
+	  This is a simple driver that is able to control
+	  the state of built in bluetooth chip on tosa.
+
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index c4dfbe87fc4e..99ecbe7f8506 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -4,7 +4,7 @@
 
 # Common support (must be linked before board specific support)
 obj-y				+= clock.o devices.o generic.o irq.o dma.o \
-				   time.o gpio.o
+				   time.o gpio.o reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
 obj-$(CONFIG_CPU_FREQ)		+= cpu-pxa.o
 
@@ -18,6 +18,7 @@ obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa2xx.o pxa27x.o
 obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
+obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
@@ -36,7 +37,12 @@ obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
-obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
+obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o eseries_udc.o
+obj-$(CONFIG_MACH_E740)		+= e740_lcd.o
+obj-$(CONFIG_MACH_E750)		+= e750_lcd.o
+obj-$(CONFIG_MACH_E400)		+= e400_lcd.o
+obj-$(CONFIG_MACH_E800)		+= e800_lcd.o
+obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-y				+= zylonite.o
@@ -44,8 +50,11 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-$(CONFIG_CPU_PXA320)	+= zylonite_pxa320.o
 endif
 obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
+obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
+obj-$(CONFIG_MACH_SAAR)		+= saar.o
 
 obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
+obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 # Support for blinky lights
 led-y := leds.o
@@ -59,3 +68,5 @@ obj-$(CONFIG_LEDS)		+= $(led-y)
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
 endif
+
+obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c
index 254892ac30cd..5c67b188a3ba 100644
--- a/arch/arm/mach-pxa/akita-ioexp.c
+++ b/arch/arm/mach-pxa/akita-ioexp.c
@@ -19,7 +19,7 @@
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include <linux/workqueue.h>
-#include <asm/arch/akita.h>
+#include <mach/akita.h>
 
 /* MAX7310 Regiser Map */
 #define MAX7310_INPUT    0x00
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index b4d04955dcb0..c01eea88f787 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -12,9 +12,9 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/hardware.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -101,21 +101,6 @@ unsigned long clk_get_rate(struct clk *clk)
 EXPORT_SYMBOL(clk_get_rate);
 
 
-static void clk_gpio27_enable(struct clk *clk)
-{
-	pxa_gpio_mode(GPIO11_3_6MHz_MD);
-}
-
-static void clk_gpio27_disable(struct clk *clk)
-{
-}
-
-static const struct clkops clk_gpio27_ops = {
-	.enable		= clk_gpio27_enable,
-	.disable	= clk_gpio27_disable,
-};
-
-
 void clk_cken_enable(struct clk *clk)
 {
 	CKEN |= 1 << clk->cken;
@@ -131,14 +116,6 @@ const struct clkops clk_cken_ops = {
 	.disable	= clk_cken_disable,
 };
 
-static struct clk common_clks[] = {
-	{
-		.name		= "GPIO27_CLK",
-		.ops		= &clk_gpio27_ops,
-		.rate		= 3686400,
-	},
-};
-
 void clks_register(struct clk *clks, size_t num)
 {
 	int i;
@@ -148,10 +125,3 @@ void clks_register(struct clk *clks, size_t num)
 		list_add(&clks[i].node, &clocks);
 	mutex_unlock(&clocks_mutex);
 }
-
-static int __init clk_init(void)
-{
-	clks_register(common_clks, ARRAY_SIZE(common_clks));
-	return 0;
-}
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 83cbfaba485d..1ec8f9178aaf 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -47,9 +47,42 @@ struct clk {
 		.other	= _other,			\
 	}
 
+#define INIT_CLK(_name, _ops, _rate, _delay, _dev)      \
+	{                                               \
+		.name   = _name,                        \
+		.dev    = _dev,                         \
+		.ops    = _ops,                         \
+		.rate   = _rate,                        \
+		.delay	= _delay,			\
+	}
+
 extern const struct clkops clk_cken_ops;
 
 void clk_cken_enable(struct clk *clk);
 void clk_cken_disable(struct clk *clk);
 
+#ifdef CONFIG_PXA3xx
+#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)	\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= &clk_pxa3xx_cken_ops,		\
+		.rate	= _rate,			\
+		.cken	= CKEN_##_cken,			\
+		.delay	= _delay,			\
+	}
+
+#define PXA3xx_CK(_name, _cken, _ops, _dev)		\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= _ops,				\
+		.cken	= CKEN_##_cken,			\
+	}
+
+extern const struct clkops clk_pxa3xx_cken_ops;
+extern void clk_pxa3xx_cken_enable(struct clk *);
+extern void clk_pxa3xx_cken_disable(struct clk *);
+#endif
+
 void clks_register(struct clk *clks, size_t num);
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c
index 319c9ff3ab9a..2d5bcea1e520 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x270-pci.c
@@ -5,7 +5,7 @@
  *
  * Bits taken from various places.
  *
- * Copyright (C) 2007 Compulab, Ltd.
+ * Copyright (C) 2007, 2008 Compulab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -19,16 +19,16 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/pci.h>
-#include <asm/arch/cm-x270.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 #include <asm/hardware/it8152.h>
 
-unsigned long it8152_base_address = CMX270_IT8152_VIRT;
+unsigned long it8152_base_address;
+static int cmx270_it8152_irq_gpio;
 
 /*
  * Only first 64MB of memory can be accessed via PCI.
@@ -42,7 +42,7 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
 	unsigned int sz = SZ_64M >> PAGE_SHIFT;
 
 	if (machine_is_armcore()) {
-		pr_info("Adjusting zones for CM-x270\n");
+		pr_info("Adjusting zones for CM-X270\n");
 
 		/*
 		 * Only adjust if > 64M on current system
@@ -60,19 +60,20 @@ void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
 static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
 	/* clear our parent irq */
-	GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
+	GEDR(cmx270_it8152_irq_gpio) = GPIO_bit(cmx270_it8152_irq_gpio);
 
 	it8152_irq_demux(irq, desc);
 }
 
-void __cmx270_pci_init_irq(void)
+void __cmx270_pci_init_irq(int irq_gpio)
 {
 	it8152_init_irq();
-	pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ));
-	set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING);
 
-	set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ),
-				cmx270_it8152_irq_demux);
+	cmx270_it8152_irq_gpio = irq_gpio;
+
+	set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
+
+	set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux);
 }
 
 #ifdef CONFIG_PM
@@ -115,8 +116,8 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 
 	/*
 	  Here comes the ugly part. The routing is baseboard specific,
-	  but defining a platform for each possible base of CM-x270 is
-	  unrealistic. Here we keep mapping for ATXBase and SB-x270.
+	  but defining a platform for each possible base of CM-X270 is
+	  unrealistic. Here we keep mapping for ATXBase and SB-X270.
 	*/
 	/* ATXBASE PCI slot */
 	if (slot == 7)
diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h
index ffe37b66f9a0..48f532f4cb51 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.h
+++ b/arch/arm/mach-pxa/cm-x270-pci.h
@@ -1,13 +1,13 @@
-extern void __cmx270_pci_init_irq(void);
+extern void __cmx270_pci_init_irq(int irq_gpio);
 extern void __cmx270_pci_suspend(void);
 extern void __cmx270_pci_resume(void);
 
 #ifdef CONFIG_PCI
-#define cmx270_pci_init_irq __cmx270_pci_init_irq
-#define cmx270_pci_suspend __cmx270_pci_suspend
-#define cmx270_pci_resume __cmx270_pci_resume
+#define cmx270_pci_init_irq(x) __cmx270_pci_init_irq(x)
+#define cmx270_pci_suspend(x) __cmx270_pci_suspend(x)
+#define cmx270_pci_resume(x) __cmx270_pci_resume(x)
 #else
-#define cmx270_pci_init_irq() do {} while (0)
-#define cmx270_pci_suspend() do {} while (0)
-#define cmx270_pci_resume() do {} while (0)
+#define cmx270_pci_init_irq(x) do {} while (0)
+#define cmx270_pci_suspend(x) do {} while (0)
+#define cmx270_pci_resume(x) do {} while (0)
 #endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 01b9964acec1..af003a269534 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/mach-pxa/cm-x270.c
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -9,44 +9,156 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/types.h>
-#include <linux/pm.h>
-#include <linux/fb.h>
 #include <linux/platform_device.h>
-#include <linux/irq.h>
 #include <linux/sysdev.h>
-#include <linux/io.h>
-#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-#include <linux/serial_8250.h>
-
 #include <video/mbxfb.h>
+#include <linux/leds.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/cm-x270.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+#include <mach/bitfield.h>
 
 #include <asm/hardware/it8152.h>
 
 #include "generic.h"
 #include "cm-x270-pci.h"
 
+/* virtual addresses for statically mapped regions */
+#define CMX270_VIRT_BASE	(0xe8000000)
+#define CMX270_IT8152_VIRT	(CMX270_VIRT_BASE)
+
 #define RTC_PHYS_BASE		(PXA_CS1_PHYS + (5 << 22))
 #define DM9000_PHYS_BASE	(PXA_CS1_PHYS + (6 << 22))
 
-static struct resource cmx270_dm9k_resource[] = {
+/* GPIO IRQ usage */
+#define GPIO10_ETHIRQ		(10)
+#define GPIO22_IT8152_IRQ	(22)
+#define GPIO83_MMC_IRQ		(83)
+#define GPIO95_GFXIRQ		(95)
+
+#define CMX270_ETHIRQ		IRQ_GPIO(GPIO10_ETHIRQ)
+#define CMX270_IT8152_IRQ	IRQ_GPIO(GPIO22_IT8152_IRQ)
+#define CMX270_MMC_IRQ		IRQ_GPIO(GPIO83_MMC_IRQ)
+#define CMX270_GFXIRQ		IRQ_GPIO(GPIO95_GFXIRQ)
+
+/* MMC power enable */
+#define GPIO105_MMC_POWER	(105)
+
+static unsigned long cmx270_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_AC97_nRESET,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MCI controller */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_SSP2_SFRM,
+	GPIO87_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,
+	GPIO49_nPWE,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
+	GPIO105_GPIO	| MFP_LPM_DRIVE_HIGH,	/* MMC/SD power */
+	GPIO53_GPIO,				/* PC card reset */
+
+	/* NAND controls */
+	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO89_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO10_GPIO,	/* DM9000 interrupt */
+	GPIO83_GPIO,	/* MMC card detect */
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource cmx270_dm9000_resource[] = {
 	[0] = {
 		.start = DM9000_PHYS_BASE,
 		.end   = DM9000_PHYS_BASE + 4,
@@ -64,31 +176,45 @@ static struct resource cmx270_dm9k_resource[] = {
 	}
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data cmx270_dm9k_platdata = {
+static struct dm9000_plat_data cmx270_dm9000_platdata = {
 	.flags		= DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device cmx270_device_dm9k = {
+static struct platform_device cmx270_dm9000_device = {
 	.name		= "dm9000",
 	.id		= 0,
-	.num_resources	= ARRAY_SIZE(cmx270_dm9k_resource),
-	.resource	= cmx270_dm9k_resource,
+	.num_resources	= ARRAY_SIZE(cmx270_dm9000_resource),
+	.resource	= cmx270_dm9000_resource,
 	.dev		= {
-		.platform_data = &cmx270_dm9k_platdata,
+		.platform_data = &cmx270_dm9000_platdata,
 	}
 };
 
-/* touchscreen controller */
+static void __init cmx270_init_dm9000(void)
+{
+	platform_device_register(&cmx270_dm9000_device);
+}
+#else
+static inline void cmx270_init_dm9000(void) {}
+#endif
+
+/* UCB1400 touchscreen controller */
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
 static struct platform_device cmx270_ts_device = {
 	.name		= "ucb1400_ts",
 	.id		= -1,
 };
 
-/* RTC */
+static void __init cmx270_init_touchscreen(void)
+{
+	platform_device_register(&cmx270_ts_device);
+}
+#else
+static inline void cmx270_init_touchscreen(void) {}
+#endif
+
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource cmx270_v3020_resource[] = {
 	[0] = {
 		.start = RTC_PHYS_BASE,
@@ -111,28 +237,67 @@ static struct platform_device cmx270_rtc_device = {
 	}
 };
 
-/*
- * CM-X270 LEDs
- */
+static void __init cmx270_init_rtc(void)
+{
+	platform_device_register(&cmx270_rtc_device);
+}
+#else
+static inline void cmx270_init_rtc(void) {}
+#endif
+
+/* CM-X270 LEDs */
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cmx270_leds[] = {
+	[0] = {
+		.name = "cm-x270:red",
+		.default_trigger = "nand-disk",
+		.gpio = 93,
+		.active_low = 1,
+	},
+	[1] = {
+		.name = "cm-x270:green",
+		.default_trigger = "heartbeat",
+		.gpio = 94,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data cmx270_gpio_led_pdata = {
+	.num_leds = ARRAY_SIZE(cmx270_leds),
+	.leds = cmx270_leds,
+};
+
 static struct platform_device cmx270_led_device = {
-	.name		= "cm-x270-led",
+	.name		= "leds-gpio",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &cmx270_gpio_led_pdata,
+	},
 };
 
+static void __init cmx270_init_leds(void)
+{
+	platform_device_register(&cmx270_led_device);
+}
+#else
+static inline void cmx270_init_leds(void) {}
+#endif
+
 /* 2700G graphics */
+#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
 static u64 fb_dma_mask = ~(u64)0;
 
 static struct resource cmx270_2700G_resource[] = {
 	/* frame buffer memory including ODFB and External SDRAM */
 	[0] = {
-		.start = MARATHON_PHYS,
-		.end   = MARATHON_PHYS + 0x02000000,
+		.start = PXA_CS2_PHYS,
+		.end   = PXA_CS2_PHYS + 0x01ffffff,
 		.flags = IORESOURCE_MEM,
 	},
 	/* Marathon registers */
 	[1] = {
-		.start = MARATHON_PHYS + 0x03fe0000,
-		.end   = MARATHON_PHYS + 0x03ffffff,
+		.start = PXA_CS2_PHYS + 0x03fe0000,
+		.end   = PXA_CS2_PHYS + 0x03ffffff,
 		.flags = IORESOURCE_MEM,
 	},
 };
@@ -200,43 +365,15 @@ static struct platform_device cmx270_2700G = {
 	.id		= -1,
 };
 
-static u64 ata_dma_mask = ~(u64)0;
-
-static struct platform_device cmx270_ata = {
-	.name = "pata_cm_x270",
-	.id = -1,
-	.dev		= {
-		.dma_mask	= &ata_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-	&cmx270_device_dm9k,
-	&cmx270_rtc_device,
-	&cmx270_2700G,
-	&cmx270_led_device,
-	&cmx270_ts_device,
-	&cmx270_ata,
-};
-
-/* Map PCI companion and IDE/General Purpose CS statically */
-static struct map_desc cmx270_io_desc[] __initdata = {
-	[0] = { /* IDE/general purpose space */
-		.virtual	= CMX270_IDE104_VIRT,
-		.pfn		= __phys_to_pfn(CMX270_IDE104_PHYS),
-		.length		= SZ_64M - SZ_8M,
-		.type		= MT_DEVICE
-	},
-	[1] = { /* PCI bridge */
-		.virtual	= CMX270_IT8152_VIRT,
-		.pfn		= __phys_to_pfn(CMX270_IT8152_PHYS),
-		.length		= SZ_64M,
-		.type		= MT_DEVICE
-	},
-};
+static void __init cmx270_init_2700G(void)
+{
+	platform_device_register(&cmx270_2700G);
+}
+#else
+static inline void cmx270_init_2700G(void) {}
+#endif
 
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 /*
   Display definitions
   keep these for backwards compatibility, although symbolic names (as
@@ -446,7 +583,16 @@ static int __init cmx270_set_display(char *str)
 */
 __setup("monitor=", cmx270_set_display);
 
+static void __init cmx270_init_display(void)
+{
+	set_pxa_fb_info(cmx270_display);
+}
+#else
+static inline void cmx270_init_display(void) {}
+#endif
+
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int cmx270_ohci_init(struct device *dev)
 {
 	/* Set the Power Control Polarity Low */
@@ -461,35 +607,37 @@ static struct pxaohci_platform_data cmx270_ohci_platform_data = {
 	.init		= cmx270_ohci_init,
 };
 
+static void __init cmx270_init_ohci(void)
+{
+	pxa_set_ohci_info(&cmx270_ohci_platform_data);
+}
+#else
+static inline void cmx270_init_ohci(void) {}
+#endif
 
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int cmx270_mci_init(struct device *dev,
 			   irq_handler_t cmx270_detect_int,
 			   void *data)
 {
 	int err;
 
-	/*
-	 * setup GPIO for PXA27x MMC controller
-	 */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-	/* SB-X270 uses GPIO105 as SD power enable */
-	pxa_gpio_mode(105 | GPIO_OUT);
+	err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
+	if (err) {
+		dev_warn(dev, "power gpio unavailable\n");
+		return err;
+	}
 
-	/* card detect IRQ on GPIO 83 */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
+	gpio_direction_output(GPIO105_MMC_POWER, 0);
 
 	err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
 			  "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
-		       " request MMC card detect IRQ\n");
+	if (err) {
+		gpio_free(GPIO105_MMC_POWER);
+		dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
+			" request MMC card detect IRQ\n");
+	}
 
 	return err;
 }
@@ -499,17 +647,18 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
 	struct pxamci_platform_data *p_d = dev->platform_data;
 
 	if ((1 << vdd) & p_d->ocr_mask) {
-		printk(KERN_DEBUG "%s: on\n", __func__);
-		GPCR(105) = GPIO_bit(105);
+		dev_dbg(dev, "power on\n");
+		gpio_set_value(GPIO105_MMC_POWER, 0);
 	} else {
-		GPSR(105) = GPIO_bit(105);
-		printk(KERN_DEBUG "%s: off\n", __func__);
+		gpio_set_value(GPIO105_MMC_POWER, 1);
+		dev_dbg(dev, "power off\n");
 	}
 }
 
 static void cmx270_mci_exit(struct device *dev, void *data)
 {
 	free_irq(CMX270_MMC_IRQ, data);
+	gpio_free(GPIO105_MMC_POWER);
 }
 
 static struct pxamci_platform_data cmx270_mci_platform_data = {
@@ -519,6 +668,14 @@ static struct pxamci_platform_data cmx270_mci_platform_data = {
 	.exit		= cmx270_mci_exit,
 };
 
+static void __init cmx270_init_mmc(void)
+{
+	pxa_set_mci_info(&cmx270_mci_platform_data);
+}
+#else
+static inline void cmx270_init_mmc(void) {}
+#endif
+
 #ifdef CONFIG_PM
 static unsigned long sleep_save_msc[10];
 
@@ -580,53 +737,63 @@ static int __init cmx270_pm_init(void)
 static int __init cmx270_pm_init(void) { return 0; }
 #endif
 
-static void __init cmx270_init(void)
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init cmx270_init_ac97(void)
 {
-	cmx270_pm_init();
-
-	set_pxa_fb_info(cmx270_display);
-
-	/* register CM-X270 platform devices */
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cmx270_init_ac97(void) {}
+#endif
 
-	/* set MCI and OHCI platform parameters */
-	pxa_set_mci_info(&cmx270_mci_platform_data);
-	pxa_set_ohci_info(&cmx270_ohci_platform_data);
-
-	/* This enables the STUART */
-	pxa_gpio_mode(GPIO46_STRXD_MD);
-	pxa_gpio_mode(GPIO47_STTXD_MD);
+static void __init cmx270_init(void)
+{
+	cmx270_pm_init();
 
-	/* This enables the BTUART  */
-	pxa_gpio_mode(GPIO42_BTRXD_MD);
-	pxa_gpio_mode(GPIO43_BTTXD_MD);
-	pxa_gpio_mode(GPIO44_BTCTS_MD);
-	pxa_gpio_mode(GPIO45_BTRTS_MD);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
+
+	cmx270_init_dm9000();
+	cmx270_init_rtc();
+	cmx270_init_display();
+	cmx270_init_mmc();
+	cmx270_init_ohci();
+	cmx270_init_ac97();
+	cmx270_init_touchscreen();
+	cmx270_init_leds();
+	cmx270_init_2700G();
 }
 
 static void __init cmx270_init_irq(void)
 {
 	pxa27x_init_irq();
 
+	cmx270_pci_init_irq(GPIO22_IT8152_IRQ);
+}
 
-	cmx270_pci_init_irq();
+#ifdef CONFIG_PCI
+/* Map PCI companion statically */
+static struct map_desc cmx270_io_desc[] __initdata = {
+	[0] = { /* PCI bridge */
+		.virtual	= CMX270_IT8152_VIRT,
+		.pfn		= __phys_to_pfn(PXA_CS4_PHYS),
+		.length		= SZ_64M,
+		.type		= MT_DEVICE
+	},
+};
 
-	/* Setup interrupt for dm9000 */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
-	set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
+static void __init cmx270_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 
-	/* Setup interrupt for 2700G */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
-	set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
+	it8152_base_address = CMX270_IT8152_VIRT;
 }
-
+#else
 static void __init cmx270_map_io(void)
 {
 	pxa_map_io();
-	iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
 }
-
+#endif
 
 MACHINE_START(ARMCORE, "Compulab CM-x270")
 	.boot_params	= 0xa0000100,
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index 574839d7c132..abce13c846c5 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -21,16 +21,16 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/colibri.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/colibri.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index b37671b71886..123a950db466 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/system.h>
@@ -35,14 +35,14 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/irda.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/corgi.h>
+#include <mach/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
@@ -465,6 +465,7 @@ static void corgi_irda_transceiver_mode(struct device *dev, int mode)
 		GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
 	else
 		GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data corgi_ficp_platform_data = {
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index 9328df37afd1..311baf149b07 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -20,12 +20,12 @@
 #include <linux/platform_device.h>
 #include <linux/module.h>
 #include <linux/string.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/corgi.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/spitz.h>
+#include <mach/akita.h>
+#include <mach/corgi.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
 #include "generic.h"
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index e91c0f26c412..35bbfccd2df3 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -20,14 +20,14 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
 
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/corgi.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index eccc45d21f75..8e2f2215c4ba 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -16,13 +16,13 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/regs-ssp.h>
+#include <mach/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/regs-ssp.h>
 #include "sharpsl.h"
 
 static DEFINE_SPINLOCK(corgi_ssp_lock);
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpu-pxa.c
index fb9ba1ab2826..6f5569bac131 100644
--- a/arch/arm/mach-pxa/cpu-pxa.c
+++ b/arch/arm/mach-pxa/cpu-pxa.c
@@ -37,9 +37,9 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #ifdef DEBUG
 static unsigned int freq_debug;
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index a6f2390ce662..35736fc08634 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,17 +4,19 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/camera.h>
-#include <asm/arch/audio.h>
+#include <mach/gpio.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/i2c.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/camera.h>
+#include <mach/audio.h>
+#include <mach/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -830,4 +832,63 @@ void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
 	pxa_register_device(&pxa3xx_device_mci3, info);
 }
 
+static struct resource pxa3xx_resources_nand[] = {
+	[0] = {
+		.start	= 0x43100000,
+		.end	= 0x43100053,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_NAND,
+		.end	= IRQ_NAND,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for Data DMA */
+		.start	= 97,
+		.end	= 97,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for Command DMA */
+		.start	= 99,
+		.end	= 99,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_nand = {
+	.name		= "pxa3xx-nand",
+	.id		= -1,
+	.dev		= {
+		.dma_mask = &pxa3xx_nand_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_nand),
+	.resource	= pxa3xx_resources_nand,
+};
+
+void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
+{
+	pxa_register_device(&pxa3xx_device_nand, info);
+}
 #endif /* CONFIG_PXA3xx */
+
+/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
+ * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
+void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
+{
+	struct platform_device *pd;
+
+	pd = platform_device_alloc("pxa2xx-spi", id);
+	if (pd == NULL) {
+		printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
+		       id);
+		return;
+	}
+
+	pd->dev.platform_data = info;
+	platform_device_add(pd);
+}
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index b852eb18daa5..887c738f5911 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -31,4 +31,6 @@ extern struct platform_device pxa25x_device_pwm1;
 extern struct platform_device pxa27x_device_pwm0;
 extern struct platform_device pxa27x_device_pwm1;
 
+extern struct platform_device pxa3xx_device_nand;
+
 void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index 3215316d7b06..c0be17e0ab82 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -20,10 +20,10 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 struct dma_channel {
 	char *name;
diff --git a/arch/arm/mach-pxa/e400_lcd.c b/arch/arm/mach-pxa/e400_lcd.c
new file mode 100644
index 000000000000..263884165f57
--- /dev/null
+++ b/arch/arm/mach-pxa/e400_lcd.c
@@ -0,0 +1,56 @@
+/*
+ * e400_lcd.c
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <asm/mach-types.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxafb.h>
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+	.pixclock       = 140703,
+	.xres           = 240,
+	.yres           = 320,
+	.bpp            = 16,
+	.hsync_len      = 4,
+	.left_margin    = 28,
+	.right_margin   = 8,
+	.vsync_len      = 3,
+	.upper_margin   = 5,
+	.lower_margin   = 6,
+	.sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+	.modes          = &e400_pxafb_mode_info,
+	.num_modes      = 1,
+	.lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3          = 0,
+	.pxafb_backlight_power  = NULL,
+};
+
+static int __init e400_lcd_init(void)
+{
+	if (!machine_is_e400())
+		return -ENODEV;
+
+	set_pxa_fb_info(&e400_pxafb_mach_info);
+	return 0;
+}
+
+module_init(e400_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e400 lcd driver");
+MODULE_LICENSE("GPLv2");
+
diff --git a/arch/arm/mach-pxa/e740_lcd.c b/arch/arm/mach-pxa/e740_lcd.c
new file mode 100644
index 000000000000..26bd599af178
--- /dev/null
+++ b/arch/arm/mach-pxa/e740_lcd.c
@@ -0,0 +1,123 @@
+/* e740_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+/*
+**potential** shutdown routine - to be investigated
+devmem2 0x0c010528 w 0xff3fff00
+devmem2 0x0c010190 w 0x7FFF8000
+devmem2 0x0c0101b0 w 0x00FF0000
+devmem2 0x0c01008c w 0x00000000
+devmem2 0x0c010080 w 0x000000bf
+devmem2 0x0c010098 w 0x00000015
+devmem2 0x0c010088 w 0x4b000204
+devmem2 0x0c010098 w 0x0000001d
+*/
+
+static struct w100_gen_regs e740_lcd_regs = {
+	.lcd_format =            0x00008023,
+	.lcdd_cntl1 =            0x0f000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00ffff03,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 20,
+	.right_margin    = 28,
+	.upper_margin    = 9,
+	.lower_margin    = 8,
+	.crtc_ss         = 0x80140013,
+	.crtc_ls         = 0x81150110,
+	.crtc_gs         = 0x80050005,
+	.crtc_vpos_gs    = 0x000a0009,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa906000a,
+	.crtc_gclk       = 0x80050108,
+	.crtc_goe        = 0x80050108,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+	.crtc_ps1_active =       0x41060010,
+};
+
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+	.init_data1 = 0x21002103,
+	.gpio_dir1  = 0xffffdeff,
+	.gpio_oe1   = 0x03c00643,
+	.init_data2 = 0x003f003f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+	.modelist   = &e740_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e740_lcd_regs,
+	.gpio       = &e740_w100_gpio_info,
+	.xtal_freq = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e740_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e740_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e740_fb_resources),
+	.resource       = e740_fb_resources,
+};
+
+static int e740_lcd_init(void)
+{
+	int ret;
+
+	if (!machine_is_e740())
+		return -ENODEV;
+
+	return platform_device_register(&e740_fb_device);
+}
+
+module_init(e740_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e740 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e750_lcd.c b/arch/arm/mach-pxa/e750_lcd.c
new file mode 100644
index 000000000000..75edc3b5390f
--- /dev/null
+++ b/arch/arm/mach-pxa/e750_lcd.c
@@ -0,0 +1,109 @@
+/* e750_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e750_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x00000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00fff003,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 21,
+	.right_margin    = 22,
+	.upper_margin    = 5,
+	.lower_margin    = 4,
+	.crtc_ss         = 0x80150014,
+	.crtc_ls         = 0x8014000d,
+	.crtc_gs         = 0xc1000005,
+	.crtc_vpos_gs    = 0x00020147,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa1700030,
+	.crtc_gclk       = 0x80cc0015,
+	.crtc_goe        = 0x80cc0015,
+	.crtc_ps1_active = 0x61060017,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+	.init_data1 = 0x01192f1b,
+	.gpio_dir1  = 0xd5ffdeff,
+	.gpio_oe1   = 0x000020bf,
+	.init_data2 = 0x010f010f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+	.modelist   = &e750_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e750_lcd_regs,
+	.gpio       = &e750_w100_gpio_info,
+	.xtal_freq  = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e750_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e750_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e750_fb_resources),
+	.resource       = e750_fb_resources,
+};
+
+static int e750_lcd_init(void)
+{
+	if (!machine_is_e750())
+		return -ENODEV;
+
+	return platform_device_register(&e750_fb_device);
+}
+
+module_init(e750_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e750 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/e800_lcd.c b/arch/arm/mach-pxa/e800_lcd.c
new file mode 100644
index 000000000000..e6aeab0ebc22
--- /dev/null
+++ b/arch/arm/mach-pxa/e800_lcd.c
@@ -0,0 +1,159 @@
+/* e800_lcd.c
+ *
+ * This file contains the definitions for the LCD timings and functions
+ * to control the LCD power / frontlighting via the w100fb driver.
+ *
+ * (c) 2005 Ian Molton <spyro@f2s.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/fb.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+#include <video/w100fb.h>
+
+static struct w100_gen_regs e800_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x02a00000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x000ff2a3,
+	.genlcd_cntl2 =          0x000002a3,
+	.genlcd_cntl3 =          0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+	[0] = {
+		.xres            = 480,
+		.yres            = 640,
+		.left_margin     = 52,
+		.right_margin    = 148,
+		.upper_margin    = 2,
+		.lower_margin    = 6,
+		.crtc_ss         = 0x80350034,
+		.crtc_ls         = 0x802b0026,
+		.crtc_gs         = 0x80160016,
+		.crtc_vpos_gs    = 0x00020003,
+		.crtc_rev        = 0x0040001d,
+		.crtc_dclk       = 0xe0000000,
+		.crtc_gclk       = 0x82a50049,
+		.crtc_goe        = 0x80ee001c,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 128,
+		.pixclk_divider         = 4,
+		.pixclk_divider_rotated = 6,
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	},
+	[1] = {
+		.xres            = 240,
+		.yres            = 320,
+		.left_margin     = 15,
+		.right_margin    = 88,
+		.upper_margin    = 0,
+		.lower_margin    = 7,
+		.crtc_ss         = 0xd010000f,
+		.crtc_ls         = 0x80070003,
+		.crtc_gs         = 0x80000000,
+		.crtc_vpos_gs    = 0x01460147,
+		.crtc_rev        = 0x00400003,
+		.crtc_dclk       = 0xa1700030,
+		.crtc_gclk       = 0x814b0008,
+		.crtc_goe        = 0x80cc0015,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 100,
+		.pixclk_divider         = 6, /* Wince uses 14 which gives a 7MHz pclk. */
+		.pixclk_divider_rotated = 6, /* we want a 14MHz one (much nicer to look at) */
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	}
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+	.init_data1 = 0xc13fc019,
+	.gpio_dir1  = 0x3e40df7f,
+	.gpio_oe1   = 0x003c3000,
+	.init_data2 = 0x00000000,
+	.gpio_dir2  = 0x00000000,
+	.gpio_oe2   = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+	.ext_cntl        = 0x09640011,
+	.sdram_mode_reg  = 0x00600021,
+	.ext_timing_cntl = 0x10001545,
+	.io_cntl         = 0x7ddd7333,
+	.size            = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+	unsigned long tmp;
+
+	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+	if (par->mode->xres == 480)
+		tmp |= 0x100;
+	else
+		tmp &= ~0x100;
+	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+	.change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+	.modelist   = e800_lcd_mode,
+	.num_modes  = 2,
+	.regs       = &e800_lcd_regs,
+	.gpio       = &e800_w100_gpio_info,
+	.mem        = &e800_w100_mem_info,
+	.tg         = &e800_tg_info,
+	.xtal_freq  = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+/* ----------------------- device declarations -------------------------- */
+
+
+static struct platform_device e800_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e800_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e800_fb_resources),
+	.resource       = e800_fb_resources,
+};
+
+static int e800_lcd_init(void)
+{
+	if (!machine_is_e800())
+		return -ENODEV;
+
+	return platform_device_register(&e800_fb_device);
+}
+
+module_init(e800_lcd_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("e800 lcd driver");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 1bf680749928..7a0a681a5847 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1,7 +1,7 @@
 /*
- * Support for CompuLab EM-x270 platform
+ * Support for CompuLab EM-X270 platform
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Author: Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -14,31 +14,159 @@
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa27x-udc.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x_keypad.h>
 
 #include "generic.h"
 
 /* GPIO IRQ usage */
-#define EM_X270_MMC_PD		(105)
-#define EM_X270_ETHIRQ		IRQ_GPIO(41)
-#define EM_X270_MMC_IRQ		IRQ_GPIO(13)
+#define GPIO41_ETHIRQ		(41)
+#define GPIO13_MMC_CD		(13)
+#define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
+#define EM_X270_MMC_CD		IRQ_GPIO(GPIO13_MMC_CD)
+
+/* NAND control GPIOs */
+#define GPIO11_NAND_CS	(11)
+#define GPIO56_NAND_RB	(56)
+
+static unsigned long em_x270_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_AC97_nRESET,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MCI controller */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* QCI */
+	GPIO84_CIF_FV,
+	GPIO25_CIF_LV,
+	GPIO53_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO81_CIF_DD_0,
+	GPIO55_CIF_DD_1,
+	GPIO51_CIF_DD_2,
+	GPIO50_CIF_DD_3,
+	GPIO52_CIF_DD_4,
+	GPIO48_CIF_DD_5,
+	GPIO17_CIF_DD_6,
+	GPIO12_CIF_DD_7,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* Keypad */
+	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO34_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO39_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO99_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO91_KP_MKIN_6	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO36_KP_MKIN_7	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+	GPIO96_KP_MKOUT_6,
+	GPIO22_KP_MKOUT_7,
+
+	/* SSP1 */
+	GPIO26_SSP1_RXD,
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO57_SSP1_TXD,
+
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_SSP2_SFRM,
+	GPIO89_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO49_nPWE,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+	/* power controls */
+	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
+	GPIO115_GPIO	| MFP_LPM_DRIVE_LOW,	/* WLAN_PWEN */
+
+	/* NAND controls */
+	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO56_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO13_GPIO,	/* MMC card detect */
+	GPIO41_GPIO,	/* DM9000 interrupt */
+};
 
-static struct resource em_x270_dm9k_resource[] = {
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource em_x270_dm9000_resource[] = {
 	[0] = {
 		.start = PXA_CS2_PHYS,
 		.end   = PXA_CS2_PHYS + 3,
@@ -56,32 +184,30 @@ static struct resource em_x270_dm9k_resource[] = {
 	}
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data em_x270_dm9k_platdata = {
+static struct dm9000_plat_data em_x270_dm9000_platdata = {
 	.flags		= DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device em_x270_dm9k = {
+static struct platform_device em_x270_dm9000 = {
 	.name		= "dm9000",
 	.id		= 0,
-	.num_resources	= ARRAY_SIZE(em_x270_dm9k_resource),
-	.resource	= em_x270_dm9k_resource,
+	.num_resources	= ARRAY_SIZE(em_x270_dm9000_resource),
+	.resource	= em_x270_dm9000_resource,
 	.dev		= {
-		.platform_data = &em_x270_dm9k_platdata,
+		.platform_data = &em_x270_dm9000_platdata,
 	}
 };
 
-/* WM9712 touchscreen controller. Hopefully the driver will make it to
- * the mainstream sometime */
-static struct platform_device em_x270_ts = {
-	.name		= "wm97xx-ts",
-	.id		= -1,
-};
+static void __init em_x270_init_dm9000(void)
+{
+	platform_device_register(&em_x270_dm9000);
+}
+#else
+static inline void em_x270_init_dm9000(void) {}
+#endif
 
-/* RTC */
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource em_x270_v3020_resource[] = {
 	[0] = {
 		.start = PXA_CS4_PHYS,
@@ -104,20 +230,26 @@ static struct platform_device em_x270_rtc = {
 	}
 };
 
-/* NAND flash */
-#define GPIO_NAND_CS	(11)
-#define GPIO_NAND_RB	(56)
+static void __init em_x270_init_rtc(void)
+{
+	platform_device_register(&em_x270_rtc);
+}
+#else
+static inline void em_x270_init_rtc(void) {}
+#endif
 
+/* NAND flash */
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 static inline void nand_cs_on(void)
 {
-	GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+	gpio_set_value(GPIO11_NAND_CS, 0);
 }
 
 static void nand_cs_off(void)
 {
 	dsb();
 
-	GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+	gpio_set_value(GPIO11_NAND_CS, 1);
 }
 
 /* hardware specific access to control-lines */
@@ -157,7 +289,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
 {
 	dsb();
 
-	return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
+	return gpio_get_value(GPIO56_NAND_RB);
 }
 
 static struct mtd_partition em_x270_partition_info[] = {
@@ -210,16 +342,35 @@ static struct platform_device em_x270_nand = {
 	}
 };
 
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-	&em_x270_dm9k,
-	&em_x270_ts,
-	&em_x270_rtc,
-	&em_x270_nand,
-};
+static void __init em_x270_init_nand(void)
+{
+	int err;
 
+	err = gpio_request(GPIO11_NAND_CS, "NAND CS");
+	if (err) {
+		pr_warning("EM-X270: failed to request NAND CS gpio\n");
+		return;
+	}
+
+	gpio_direction_output(GPIO11_NAND_CS, 1);
+
+	err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+	if (err) {
+		pr_warning("EM-X270: failed to request NAND R/B gpio\n");
+		gpio_free(GPIO11_NAND_CS);
+		return;
+	}
+
+	gpio_direction_input(GPIO56_NAND_RB);
+
+	platform_device_register(&em_x270_nand);
+}
+#else
+static inline void em_x270_init_nand(void) {}
+#endif
 
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int em_x270_ohci_init(struct device *dev)
 {
 	/* Set the Power Control Polarity Low */
@@ -237,27 +388,23 @@ static struct pxaohci_platform_data em_x270_ohci_platform_data = {
 	.init		= em_x270_ohci_init,
 };
 
+static void __init em_x270_init_ohci(void)
+{
+	pxa_set_ohci_info(&em_x270_ohci_platform_data);
+}
+#else
+static inline void em_x270_init_ohci(void) {}
+#endif
 
+/* MCI controller setup */
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int em_x270_mci_init(struct device *dev,
 			    irq_handler_t em_x270_detect_int,
 			    void *data)
 {
-	int err;
-
-	/* setup GPIO for PXA27x MMC controller */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-	/* EM-X270 uses GPIO13 as SD power enable */
-	pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
-
-	err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
+	int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
+			      IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			      "MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
 		       __func__, err);
@@ -279,7 +426,8 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 
 static void em_x270_mci_exit(struct device *dev, void *data)
 {
-	free_irq(EM_X270_MMC_IRQ, data);
+	int irq = gpio_to_irq(GPIO13_MMC_CD);
+	free_irq(irq, data);
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
@@ -289,7 +437,16 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
 	.exit		= em_x270_mci_exit,
 };
 
+static void __init em_x270_init_mmc(void)
+{
+	pxa_set_mci_info(&em_x270_mci_platform_data);
+}
+#else
+static inline void em_x270_init_mmc(void) {}
+#endif
+
 /* LCD 480x640 */
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info em_x270_lcd_mode = {
 	.pixclock	= 50000,
 	.bpp		= 16,
@@ -307,40 +464,96 @@ static struct pxafb_mode_info em_x270_lcd_mode = {
 static struct pxafb_mach_info em_x270_lcd = {
 	.modes		= &em_x270_lcd_mode,
 	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lccr0		= LCCR0_PAS,
-	.lccr3		= LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
 };
-
-static void __init em_x270_init(void)
+static void __init em_x270_init_lcd(void)
 {
-	/* setup LCD */
 	set_pxa_fb_info(&em_x270_lcd);
+}
+#else
+static inline void em_x270_init_lcd(void) {}
+#endif
 
-	/* register EM-X270 platform devices */
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init em_x270_init_ac97(void)
+{
 	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void em_x270_init_ac97(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static unsigned int em_x270_matrix_keys[] = {
+	KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
+	KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
+	KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
+};
 
-	/* set MCI and OHCI platform parameters */
-	pxa_set_mci_info(&em_x270_mci_platform_data);
-	pxa_set_ohci_info(&em_x270_ohci_platform_data);
+struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+	/* code map for the matrix keys */
+	.matrix_key_rows	= 3,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= em_x270_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(em_x270_matrix_keys),
+};
+
+static void __init em_x270_init_keypad(void)
+{
+	pxa_set_keypad_info(&em_x270_keypad_info);
+}
+#else
+static inline void em_x270_init_keypad(void) {}
+#endif
 
-	/* setup STUART GPIOs */
-	pxa_gpio_mode(GPIO46_STRXD_MD);
-	pxa_gpio_mode(GPIO47_STTXD_MD);
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button gpio_keys_button[] = {
+	[0] = {
+		.desc	= "sleep/wakeup",
+		.code	= KEY_SUSPEND,
+		.type	= EV_PWR,
+		.gpio	= 1,
+		.wakeup	= 1,
+	},
+};
 
-	/* setup BTUART GPIOs */
-	pxa_gpio_mode(GPIO42_BTRXD_MD);
-	pxa_gpio_mode(GPIO43_BTTXD_MD);
-	pxa_gpio_mode(GPIO44_BTCTS_MD);
-	pxa_gpio_mode(GPIO45_BTRTS_MD);
+static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
+	.buttons	= gpio_keys_button,
+	.nbuttons	= 1,
+};
 
-	/* Setup interrupt for dm9000 */
-	set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
+static struct platform_device em_x270_gpio_keys = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &em_x270_gpio_keys_data,
+	},
+};
+
+static void __init em_x270_init_gpio_keys(void)
+{
+	platform_device_register(&em_x270_gpio_keys);
+}
+#else
+static inline void em_x270_init_gpio_keys(void) {}
+#endif
+
+static void __init em_x270_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
+
+	em_x270_init_dm9000();
+	em_x270_init_rtc();
+	em_x270_init_nand();
+	em_x270_init_lcd();
+	em_x270_init_mmc();
+	em_x270_init_ohci();
+	em_x270_init_keypad();
+	em_x270_init_gpio_keys();
+	em_x270_init_ac97();
 }
 
-MACHINE_START(EM_X270, "Compulab EM-x270")
+MACHINE_START(EM_X270, "Compulab EM-X270")
 	.boot_params	= 0xa0000100,
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index ee0ae93c876a..03942450885b 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -14,10 +14,10 @@
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 
-#include <generic.h>
+#include "generic.h"
 
 /* Only e800 has 128MB RAM */
 static void __init eseries_fixup(struct machine_desc *desc,
@@ -47,6 +47,19 @@ MACHINE_START(E330, "Toshiba e330")
 MACHINE_END
 #endif
 
+#ifdef CONFIG_MACH_E350
+MACHINE_START(E350, "Toshiba e350")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa25x_init_irq,
+	.fixup          = eseries_fixup,
+	.timer = &pxa_timer,
+MACHINE_END
+#endif
+
 #ifdef CONFIG_MACH_E740
 MACHINE_START(E740, "Toshiba e740")
         /* Maintainer: Ian Molton (spyro@f2s.com) */
diff --git a/arch/arm/mach-pxa/eseries_udc.c b/arch/arm/mach-pxa/eseries_udc.c
new file mode 100644
index 000000000000..d622c04c0d44
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries_udc.c
@@ -0,0 +1,57 @@
+/*
+ * UDC functions for the Toshiba e-series PDAs
+ *
+ * Copyright (c) Ian Molton 2003
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+
+#include <mach/udc.h>
+#include <mach/eseries-gpio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/domain.h>
+
+/* local PXA generic code */
+#include "generic.h"
+
+static struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+	.gpio_vbus   = GPIO_E7XX_USB_DISC,
+	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+	.gpio_vbus   = GPIO_E800_USB_DISC,
+	.gpio_pullup = GPIO_E800_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+static int __init eseries_udc_init(void)
+{
+	if (machine_is_e330() || machine_is_e350() ||
+	    machine_is_e740() || machine_is_e750() ||
+	    machine_is_e400())
+		pxa_set_udc_info(&e7xx_udc_mach_info);
+	else if (machine_is_e800())
+		pxa_set_udc_info(&e800_udc_mach_info);
+
+	return 0;
+}
+
+module_init(eseries_udc_init);
+
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>");
+MODULE_DESCRIPTION("eseries UDC support");
+MODULE_LICENSE("GPLv2");
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
new file mode 100644
index 000000000000..cc3d850cc0b6
--- /dev/null
+++ b/arch/arm/mach-pxa/ezx.c
@@ -0,0 +1,220 @@
+/*
+ *  ezx.c - Common code for the EZX platform.
+ *
+ *  Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
+ *		  2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
+ *		  2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/setup.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/i2c.h>
+
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+#include "generic.h"
+
+static struct platform_pwm_backlight_data ezx_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 1023,
+	.dft_brightness	= 1023,
+	.pwm_period_ns	= 78770,
+};
+
+static struct platform_device ezx_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &pxa27x_device_pwm0.dev,
+		.platform_data = &ezx_backlight_data,
+	},
+};
+
+static struct pxafb_mode_info mode_ezx_old = {
+	.pixclock		= 150000,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 16,
+	.hsync_len		= 10,
+	.left_margin		= 20,
+	.right_margin		= 10,
+	.vsync_len		= 2,
+	.upper_margin		= 3,
+	.lower_margin		= 2,
+	.sync			= 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_1 = {
+	.modes		= &mode_ezx_old,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
+};
+
+static struct pxafb_mode_info mode_72r89803y01 = {
+	.pixclock		= 192308,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 32,
+	.depth			= 18,
+	.hsync_len		= 10,
+	.left_margin		= 20,
+	.right_margin		= 10,
+	.vsync_len		= 2,
+	.upper_margin		= 3,
+	.lower_margin		= 2,
+	.sync			= 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_2 = {
+	.modes		= &mode_72r89803y01,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_18BPP,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&ezx_backlight_device,
+};
+
+static unsigned long ezx_pin_config[] __initdata = {
+	/* PWM backlight */
+	GPIO16_PWM0_OUT,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* For A780 support (connected with Neptune GSM chip) */
+	GPIO30_USB_P3_2,	/* ICL_TXENB */
+	GPIO31_USB_P3_6,	/* ICL_VPOUT */
+	GPIO90_USB_P3_5,	/* ICL_VPIN */
+	GPIO91_USB_P3_1,	/* ICL_XRXD */
+	GPIO56_USB_P3_4,	/* ICL_VMOUT */
+	GPIO113_USB_P3_3,	/* /ICL_VMIN */
+};
+
+static void __init ezx_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa_set_i2c_info(NULL);
+	if (machine_is_ezx_a780() || machine_is_ezx_e680())
+		set_pxa_fb_info(&ezx_fb_info_1);
+	else
+		set_pxa_fb_info(&ezx_fb_info_2);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init ezx_fixup(struct machine_desc *desc, struct tag *tags,
+		char **cmdline, struct meminfo *mi)
+{
+	/* We have two ram chips. First one with 32MB at 0xA0000000 and a second
+	 * 16MB one at 0xAC000000
+	 */
+	mi->nr_banks = 2;
+	mi->bank[0].start = 0xa0000000;
+	mi->bank[0].node = 0;
+	mi->bank[0].size = (32*1024*1024);
+	mi->bank[1].start = 0xac000000;
+	mi->bank[1].node = 1;
+	mi->bank[1].size = (16*1024*1024);
+}
+
+#ifdef CONFIG_MACH_EZX_A780
+MACHINE_START(EZX_A780, "Motorola EZX A780")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+MACHINE_START(EZX_E680, "Motorola EZX E680")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+MACHINE_START(EZX_A1200, "Motorola EZX A1200")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+MACHINE_START(EZX_A910, "Motorola EZX A910")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+MACHINE_START(EZX_E6, "Motorola EZX E6")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+MACHINE_START(EZX_E2, "Motorola EZX E2")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index ca053226fba0..ceaed0076366 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -20,15 +20,25 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/reset.h>
 
 #include "generic.h"
 
+void clear_reset_status(unsigned int mask)
+{
+	if (cpu_is_pxa2xx())
+		pxa2xx_clear_reset_status(mask);
+
+	if (cpu_is_pxa3xx())
+		pxa3xx_clear_reset_status(mask);
+}
+
 /*
  * Get the clock frequency as reflected by CCCR and the turbo flag.
  * We assume these values have been applied via a fcs.
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 5bb7ae757831..041c048320e4 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -47,12 +47,20 @@ extern unsigned pxa27x_get_memclk_frequency_10khz(void);
 #define pxa27x_get_memclk_frequency_10khz()	(0)
 #endif
 
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+extern void pxa2xx_clear_reset_status(unsigned int);
+#else
+static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
+#endif
+
 #ifdef CONFIG_PXA3xx
 extern unsigned pxa3xx_get_clk_frequency_khz(int);
 extern unsigned pxa3xx_get_memclk_frequency_10khz(void);
+extern void pxa3xx_clear_reset_status(unsigned int);
 #else
 #define pxa3xx_get_clk_frequency_khz(x)		(0)
 #define pxa3xx_get_memclk_frequency_10khz()	(0)
+static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
 #endif
 
 extern struct sysdev_class pxa_irq_sysclass;
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 7d3e16970be0..07acc1b23857 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -18,10 +18,10 @@
 #include <linux/sysdev.h>
 
 #include <asm/gpio.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index bdf239754037..c0092472fa58 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -34,13 +34,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/gumstix.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/gumstix.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 2637633f9166..5aa0270d5605 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -25,18 +25,18 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/idp.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/idp.h>
+#include <mach/pxafb.h>
+#include <mach/bitfield.h>
+#include <mach/mmc.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/include/mach/akita.h b/arch/arm/mach-pxa/include/mach/akita.h
new file mode 100644
index 000000000000..5d8cc1d9cb10
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/akita.h
@@ -0,0 +1,32 @@
+/*
+ * Hardware specific definitions for SL-C1000 (Akita)
+ *
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/* Akita IO Expander GPIOs */
+
+#define AKITA_IOEXP_RESERVED_7      (1 << 7)
+#define AKITA_IOEXP_IR_ON           (1 << 6)
+#define AKITA_IOEXP_AKIN_PULLUP     (1 << 5)
+#define AKITA_IOEXP_BACKLIGHT_CONT  (1 << 4)
+#define AKITA_IOEXP_BACKLIGHT_ON    (1 << 3)
+#define AKITA_IOEXP_MIC_BIAS        (1 << 2)
+#define AKITA_IOEXP_RESERVED_1      (1 << 1)
+#define AKITA_IOEXP_RESERVED_0      (1 << 0)
+
+/* Direction Bitfield  0=output  1=input */
+#define AKITA_IOEXP_IO_DIR	0
+/* Default Values */
+#define AKITA_IOEXP_IO_OUT	(AKITA_IOEXP_IR_ON | AKITA_IOEXP_AKIN_PULLUP)
+
+extern struct platform_device akitaioexp_device;
+
+void akita_set_ioexp(struct device *dev, unsigned char bitmask);
+void akita_reset_ioexp(struct device *dev, unsigned char bitmask);
+
diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
new file mode 100644
index 000000000000..f82f96dd1053
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/audio.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_ARCH_AUDIO_H__
+#define __ASM_ARCH_AUDIO_H__
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+
+typedef struct {
+	int (*startup)(struct snd_pcm_substream *, void *);
+	void (*shutdown)(struct snd_pcm_substream *, void *);
+	void (*suspend)(void *);
+	void (*resume)(void *);
+	void *priv;
+} pxa2xx_audio_ops_t;
+
+extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/bitfield.h b/arch/arm/mach-pxa/include/mach/bitfield.h
new file mode 100644
index 000000000000..f1f0e3387d9c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/bitfield.h
@@ -0,0 +1,113 @@
+/*
+ *	FILE    	bitfield.h
+ *
+ *	Version 	1.1
+ *	Author  	Copyright (c) Marc A. Viredaz, 1998
+ *	        	DEC Western Research Laboratory, Palo Alto, CA
+ *	Date    	April 1998 (April 1997)
+ *	System  	Advanced RISC Machine (ARM)
+ *	Language	C or ARM Assembly
+ *	Purpose 	Definition of macros to operate on bit fields.
+ */
+
+
+
+#ifndef __BITFIELD_H
+#define __BITFIELD_H
+
+#ifndef __ASSEMBLY__
+#define UData(Data)	((unsigned long) (Data))
+#else
+#define UData(Data)	(Data)
+#endif
+
+
+/*
+ * MACRO: Fld
+ *
+ * Purpose
+ *    The macro "Fld" encodes a bit field, given its size and its shift value
+ *    with respect to bit 0.
+ *
+ * Note
+ *    A more intuitive way to encode bit fields would have been to use their
+ *    mask. However, extracting size and shift value information from a bit
+ *    field's mask is cumbersome and might break the assembler (255-character
+ *    line-size limit).
+ *
+ * Input
+ *    Size      	Size of the bit field, in number of bits.
+ *    Shft      	Shift value of the bit field with respect to bit 0.
+ *
+ * Output
+ *    Fld       	Encoded bit field.
+ */
+
+#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
+
+
+/*
+ * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
+ *
+ * Purpose
+ *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
+ *    the size, shift value, mask, aligned mask, and first bit of a
+ *    bit field.
+ *
+ * Input
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FSize     	Size of the bit field, in number of bits.
+ *    FShft     	Shift value of the bit field with respect to bit 0.
+ *    FMsk      	Mask for the bit field.
+ *    FAlnMsk   	Mask for the bit field, aligned on bit 0.
+ *    F1stBit   	First bit of the bit field.
+ */
+
+#define FSize(Field)	((Field) >> 16)
+#define FShft(Field)	((Field) & 0x0000FFFF)
+#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
+#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
+#define F1stBit(Field)	(UData (1) << FShft (Field))
+
+
+/*
+ * MACRO: FInsrt
+ *
+ * Purpose
+ *    The macro "FInsrt" inserts a value into a bit field by shifting the
+ *    former appropriately.
+ *
+ * Input
+ *    Value     	Bit-field value.
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FInsrt    	Bit-field value positioned appropriately.
+ */
+
+#define FInsrt(Value, Field) \
+                	(UData (Value) << FShft (Field))
+
+
+/*
+ * MACRO: FExtr
+ *
+ * Purpose
+ *    The macro "FExtr" extracts the value of a bit field by masking and
+ *    shifting it appropriately.
+ *
+ * Input
+ *    Data      	Data containing the bit-field to be extracted.
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FExtr     	Bit-field value.
+ */
+
+#define FExtr(Data, Field) \
+                	((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
+
+
+#endif /* __BITFIELD_H */
diff --git a/arch/arm/mach-pxa/include/mach/camera.h b/arch/arm/mach-pxa/include/mach/camera.h
new file mode 100644
index 000000000000..39516ced8b1f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/camera.h
@@ -0,0 +1,48 @@
+/*
+    camera.h - PXA camera driver header file
+
+    Copyright (C) 2003, Intel Corporation
+    Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __ASM_ARCH_CAMERA_H_
+#define __ASM_ARCH_CAMERA_H_
+
+#define PXA_CAMERA_MASTER	1
+#define PXA_CAMERA_DATAWIDTH_4	2
+#define PXA_CAMERA_DATAWIDTH_5	4
+#define PXA_CAMERA_DATAWIDTH_8	8
+#define PXA_CAMERA_DATAWIDTH_9	0x10
+#define PXA_CAMERA_DATAWIDTH_10	0x20
+#define PXA_CAMERA_PCLK_EN	0x40
+#define PXA_CAMERA_MCLK_EN	0x80
+#define PXA_CAMERA_PCP		0x100
+#define PXA_CAMERA_HSP		0x200
+#define PXA_CAMERA_VSP		0x400
+
+struct pxacamera_platform_data {
+	int (*init)(struct device *);
+	int (*power)(struct device *, int);
+	int (*reset)(struct device *, int);
+
+	unsigned long flags;
+	unsigned long mclk_10khz;
+};
+
+extern void pxa_set_camera_info(struct pxacamera_platform_data *);
+
+#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
new file mode 100644
index 000000000000..2ae373fb5675
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -0,0 +1,19 @@
+#ifndef _COLIBRI_H_
+#define _COLIBRI_H_
+
+/* physical memory regions */
+#define COLIBRI_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
+#define COLIBRI_ETH_PHYS	(PXA_CS2_PHYS)  /* Ethernet DM9000 region */
+#define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
+
+/* virtual memory regions */
+#define COLIBRI_DISK_VIRT	0xF0000000	/* Disk On Chip region */
+
+/* size of flash */
+#define COLIBRI_FLASH_SIZE	0x02000000	/* Flash size 32 MB */
+
+/* Ethernet Controller Davicom DM9000 */
+#define GPIO_DM9000		114
+#define COLIBRI_ETH_IRQ	IRQ_GPIO(GPIO_DM9000)
+
+#endif /* _COLIBRI_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
new file mode 100644
index 000000000000..bf856503baf6
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -0,0 +1,109 @@
+/*
+ * Hardware specific definitions for SL-C7xx series of PDAs
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_CORGI_H
+#define __ASM_ARCH_CORGI_H  1
+
+
+/*
+ * Corgi (Non Standard) GPIO Definitions
+ */
+#define CORGI_GPIO_KEY_INT			(0)	/* Keyboard Interrupt */
+#define CORGI_GPIO_AC_IN			(1) /* Charger Detection */
+#define CORGI_GPIO_WAKEUP			(3) /* System wakeup notification? */
+#define CORGI_GPIO_AK_INT			(4)	/* Headphone Jack Control Interrupt */
+#define CORGI_GPIO_TP_INT			(5)	/* Touch Panel Interrupt */
+#define CORGI_GPIO_nSD_WP			(7) /* SD Write Protect? */
+#define CORGI_GPIO_nSD_DETECT		(9) /* MMC/SD Card Detect */
+#define CORGI_GPIO_nSD_INT			(10) /* SD Interrupt for SDIO? */
+#define CORGI_GPIO_MAIN_BAT_LOW		(11) /* Main Battery Low Notification */
+#define CORGI_GPIO_BAT_COVER		(11) /* Battery Cover Detect */
+#define CORGI_GPIO_LED_ORANGE		(13) /* Orange LED Control */
+#define CORGI_GPIO_CF_CD			(14) /* Compact Flash Card Detect */
+#define CORGI_GPIO_CHRG_FULL		(16) /* Charging Complete Notification */
+#define CORGI_GPIO_CF_IRQ			(17) /* Compact Flash Interrupt */
+#define CORGI_GPIO_LCDCON_CS		(19) /* LCD Control Chip Select */
+#define CORGI_GPIO_MAX1111_CS		(20) /* MAX1111 Chip Select */
+#define CORGI_GPIO_ADC_TEMP_ON		(21) /* Select battery voltage or temperature */
+#define CORGI_GPIO_IR_ON			(22) /* Enable IR Transciever */
+#define CORGI_GPIO_ADS7846_CS		(24) /* ADS7846 Chip Select */
+#define CORGI_GPIO_SD_PWR			(33) /* MMC/SD Power */
+#define CORGI_GPIO_CHRG_ON			(38) /* Enable battery Charging */
+#define CORGI_GPIO_DISCHARGE_ON		(42) /* Enable battery Discharge */
+#define CORGI_GPIO_CHRG_UKN			(43) /* Unknown Charging (Bypass Control?) */
+#define CORGI_GPIO_HSYNC			(44) /* LCD HSync Pulse */
+#define CORGI_GPIO_USB_PULLUP		(45) /* USB show presence to host */
+
+
+/*
+ * Corgi Keyboard Definitions
+ */
+#define CORGI_KEY_STROBE_NUM		(12)
+#define CORGI_KEY_SENSE_NUM			(8)
+#define CORGI_GPIO_ALL_STROBE_BIT	(0x00003ffc)
+#define CORGI_GPIO_HIGH_SENSE_BIT	(0xfc000000)
+#define CORGI_GPIO_HIGH_SENSE_RSHIFT	(26)
+#define CORGI_GPIO_LOW_SENSE_BIT	(0x00000003)
+#define CORGI_GPIO_LOW_SENSE_LSHIFT	(6)
+#define CORGI_GPIO_STROBE_BIT(a)	GPIO_bit(66+(a))
+#define CORGI_GPIO_SENSE_BIT(a)		GPIO_bit(58+(a))
+#define CORGI_GAFR_ALL_STROBE_BIT	(0x0ffffff0)
+#define CORGI_GAFR_HIGH_SENSE_BIT	(0xfff00000)
+#define CORGI_GAFR_LOW_SENSE_BIT	(0x0000000f)
+#define CORGI_GPIO_KEY_SENSE(a)		(58+(a))
+#define CORGI_GPIO_KEY_STROBE(a)	(66+(a))
+
+
+/*
+ * Corgi Interrupts
+ */
+#define CORGI_IRQ_GPIO_KEY_INT		IRQ_GPIO(0)
+#define CORGI_IRQ_GPIO_AC_IN		IRQ_GPIO(1)
+#define CORGI_IRQ_GPIO_WAKEUP		IRQ_GPIO(3)
+#define CORGI_IRQ_GPIO_AK_INT		IRQ_GPIO(4)
+#define CORGI_IRQ_GPIO_TP_INT		IRQ_GPIO(5)
+#define CORGI_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(9)
+#define CORGI_IRQ_GPIO_nSD_INT		IRQ_GPIO(10)
+#define CORGI_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO(11)
+#define CORGI_IRQ_GPIO_CF_CD		IRQ_GPIO(14)
+#define CORGI_IRQ_GPIO_CHRG_FULL	IRQ_GPIO(16)	/* Battery fully charged */
+#define CORGI_IRQ_GPIO_CF_IRQ		IRQ_GPIO(17)
+#define CORGI_IRQ_GPIO_KEY_SENSE(a)	IRQ_GPIO(58+(a))	/* Keyboard Sense lines */
+
+
+/*
+ * Corgi SCOOP GPIOs and Config
+ */
+#define CORGI_SCP_LED_GREEN		SCOOP_GPCR_PA11
+#define CORGI_SCP_SWA			SCOOP_GPCR_PA12  /* Hinge Switch A */
+#define CORGI_SCP_SWB			SCOOP_GPCR_PA13  /* Hinge Switch B */
+#define CORGI_SCP_MUTE_L		SCOOP_GPCR_PA14
+#define CORGI_SCP_MUTE_R		SCOOP_GPCR_PA15
+#define CORGI_SCP_AKIN_PULLUP	SCOOP_GPCR_PA16
+#define CORGI_SCP_APM_ON		SCOOP_GPCR_PA17
+#define CORGI_SCP_BACKLIGHT_CONT	SCOOP_GPCR_PA18
+#define CORGI_SCP_MIC_BIAS		SCOOP_GPCR_PA19
+
+#define CORGI_SCOOP_IO_DIR	( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \
+			CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \
+			CORGI_SCP_MIC_BIAS )
+#define CORGI_SCOOP_IO_OUT	( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
+
+
+/*
+ * Shared data structures
+ */
+extern struct platform_device corgiscoop_device;
+extern struct platform_device corgissp_device;
+
+#endif /* __ASM_ARCH_CORGI_H  */
+
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
new file mode 100644
index 000000000000..55d6a175ab19
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -0,0 +1,25 @@
+/* arch/arm/mach-pxa/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include "hardware.h"
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x40000000		@ physical
+		movne	\rx, #io_p2v(0x40000000)	@ virtual
+		orr	\rx, \rx, #0x00100000
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
new file mode 100644
index 000000000000..955bfe606067
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -0,0 +1,50 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/dma.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef struct pxa_dma_desc {
+	volatile u32 ddadr;	/* Points to the next descriptor + flags */
+	volatile u32 dsadr;	/* DSADR value for the current transfer */
+	volatile u32 dtadr;	/* DTADR value for the current transfer */
+	volatile u32 dcmd;	/* DCMD value for the current transfer */
+} pxa_dma_desc;
+
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define HAVE_ARCH_PCI_SET_DMA_MASK	1
+#endif
+
+/*
+ * DMA registration
+ */
+
+int __init pxa_init_dma(int num_ch);
+
+int pxa_request_dma (char *name,
+			 pxa_dma_prio prio,
+			 void (*irq_handler)(int, void *),
+			 void *data);
+
+void pxa_free_dma (int dma_ch);
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
new file mode 100644
index 000000000000..de16c12d5232
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-pxa/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for PXA-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
+		mov	\tmp, \tmp, lsr #13
+		and	\tmp, \tmp, #0x7		@ Core G
+		cmp	\tmp, #1
+		bhi	1004f
+
+		mov	\base, #io_p2v(0x40000000)	@ IIR Ctl = 0x40d00000
+		add	\base, \base, #0x00d00000
+		ldr	\irqstat, [\base, #0]		@ ICIP
+		ldr	\irqnr, [\base, #4]		@ ICMR
+		b	1002f
+
+1004:
+		mrc	p6, 0, \irqstat, c6, c0, 0	@ ICIP2
+		mrc	p6, 0, \irqnr, c7, c0, 0	@ ICMR2
+		ands	\irqnr, \irqstat, \irqnr
+		beq	1003f
+		rsb	\irqstat, \irqnr, #0
+		and	\irqstat, \irqstat, \irqnr
+		clz	\irqnr, \irqstat
+		rsb	\irqnr, \irqnr, #31
+		add	\irqnr, \irqnr, #32
+		b	1001f
+1003:
+		mrc	p6, 0, \irqstat, c0, c0, 0	@ ICIP
+		mrc	p6, 0, \irqnr, c1, c0, 0	@ ICMR
+1002:
+		ands	\irqnr, \irqstat, \irqnr
+		beq	1001f
+		rsb	\irqstat, \irqnr, #0
+		and	\irqstat, \irqstat, \irqnr
+		clz	\irqnr, \irqstat
+		rsb	\irqnr, \irqnr, #31
+1001:
+		.endm
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
new file mode 100644
index 000000000000..4c90b1310270
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -0,0 +1,50 @@
+/*
+ *  eseries-gpio.h
+ *
+ *  Copyright (C) Ian Molton <spyro@f2s.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+/* e-series power button */
+#define GPIO_ESERIES_POWERBTN     0
+
+/* UDC GPIO definitions */
+#define GPIO_E7XX_USB_DISC       13
+#define GPIO_E7XX_USB_PULLUP      3
+
+#define GPIO_E800_USB_DISC        4
+#define GPIO_E800_USB_PULLUP     84
+
+/* e740 PCMCIA GPIO definitions */
+/* Note: PWR1 seems to be inverted */
+#define GPIO_E740_PCMCIA_CD0      8
+#define GPIO_E740_PCMCIA_CD1     44
+#define GPIO_E740_PCMCIA_RDY0    11
+#define GPIO_E740_PCMCIA_RDY1     6
+#define GPIO_E740_PCMCIA_RST0    27
+#define GPIO_E740_PCMCIA_RST1    24
+#define GPIO_E740_PCMCIA_PWR0    20
+#define GPIO_E740_PCMCIA_PWR1    23
+
+/* e750 PCMCIA GPIO definitions */
+#define GPIO_E750_PCMCIA_CD0      8
+#define GPIO_E750_PCMCIA_RDY0    12
+#define GPIO_E750_PCMCIA_RST0    27
+#define GPIO_E750_PCMCIA_PWR0    20
+
+/* e800 PCMCIA GPIO definitions */
+#define GPIO_E800_PCMCIA_RST0    69
+#define GPIO_E800_PCMCIA_RST1    72
+#define GPIO_E800_PCMCIA_PWR0    20
+#define GPIO_E800_PCMCIA_PWR1    73
+
+/* e7xx IrDA power control */
+#define GPIO_E7XX_IR_ON          38
+
+/* ASIC related GPIOs */
+#define GPIO_ESERIES_TMIO_IRQ        5
+#define GPIO_E800_ANGELX_IRQ      8
diff --git a/arch/arm/mach-pxa/include/mach/eseries-irq.h b/arch/arm/mach-pxa/include/mach/eseries-irq.h
new file mode 100644
index 000000000000..f2a93d5e31d3
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/eseries-irq.h
@@ -0,0 +1,27 @@
+/*
+ *  eseries-irq.h
+ *
+ *  Copyright (C) Ian Molton <spyro@f2s.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8)
+#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n))
+
+#define ANGELX_RDY0_IRQ IRQ_ANGELX(0)
+#define ANGELX_ST0_IRQ  IRQ_ANGELX(1)
+#define ANGELX_CD0_IRQ  IRQ_ANGELX(2)
+#define ANGELX_RDY1_IRQ IRQ_ANGELX(3)
+#define ANGELX_ST1_IRQ  IRQ_ANGELX(4)
+#define ANGELX_CD1_IRQ  IRQ_ANGELX(5)
+
+#define TMIO_IRQ_BASE (IRQ_BOARD_START+0)
+#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n))
+
+#define TMIO_SD_IRQ     IRQ_TMIO(1)
+#define TMIO_USB_IRQ    IRQ_TMIO(2)
+
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
new file mode 100644
index 000000000000..2c538d8c362d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-pxa/include/mach/gpio.h
+ *
+ * PXA GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_PXA_GPIO_H
+#define __ASM_ARCH_PXA_GPIO_H
+
+#include <mach/pxa-regs.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include <asm-generic/gpio.h>
+
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space.
+ */
+#define NR_BUILTIN_GPIO 128
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
+		return GPLR(gpio) & GPIO_bit(gpio);
+	else
+		return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
+		if (value)
+			GPSR(gpio) = GPIO_bit(gpio);
+		else
+			GPCR(gpio) = GPIO_bit(gpio);
+	} else {
+		__gpio_set_value(gpio, value);
+	}
+}
+
+#define gpio_cansleep __gpio_cansleep
+
+#define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
+#define irq_to_gpio(irq)	IRQ_TO_GPIO(irq)
+
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
new file mode 100644
index 000000000000..42ee1956750e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -0,0 +1,96 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/gumstix.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/* BTRESET - Reset line to Bluetooth module, active low signal. */
+#define GPIO_GUMSTIX_BTRESET          7
+#define GPIO_GUMSTIX_BTRESET_MD		(GPIO_GUMSTIX_BTRESET | GPIO_OUT)
+
+
+/*
+GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
+interrupt signal for determining cable presence. On the original gumstix,
+this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
+this moves to GPIO17 and GPIO37. */
+
+/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
+has detected a cable insertion; driven low otherwise. */
+
+#ifdef CONFIG_ARCH_GUMSTIX_ORIG
+
+#define GPIO_GUMSTIX_USB_GPIOn		81
+#define GPIO_GUMSTIX_USB_GPIOx		83
+
+#else
+
+#define GPIO_GUMSTIX_USB_GPIOn		35
+#define GPIO_GUMSTIX_USB_GPIOx		41
+
+#endif
+
+/* usb state change */
+#define GUMSTIX_USB_INTR_IRQ		IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
+
+#define GPIO_GUMSTIX_USB_GPIOn_MD	(GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
+#define GPIO_GUMSTIX_USB_GPIOx_CON_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
+#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_IN)
+
+/*
+ * SD/MMC definitions
+ */
+#define GUMSTIX_GPIO_nSD_WP		22 /* SD Write Protect */
+#define GUMSTIX_GPIO_nSD_DETECT		11 /* MMC/SD Card Detect */
+#define GUMSTIX_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT)
+
+/*
+ * SMC Ethernet definitions
+ * ETH_RST provides a hardware reset line to the ethernet chip
+ * ETH is the IRQ line in from the ethernet chip to the PXA
+ */
+#define GPIO_GUMSTIX_ETH0_RST		80
+#define GPIO_GUMSTIX_ETH0_RST_MD	(GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
+#define GPIO_GUMSTIX_ETH1_RST		52
+#define GPIO_GUMSTIX_ETH1_RST_MD	(GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
+
+#define GPIO_GUMSTIX_ETH0		36
+#define GPIO_GUMSTIX_ETH0_MD		(GPIO_GUMSTIX_ETH0 | GPIO_IN)
+#define GUMSTIX_ETH0_IRQ		IRQ_GPIO(GPIO_GUMSTIX_ETH0)
+#define GPIO_GUMSTIX_ETH1		27
+#define GPIO_GUMSTIX_ETH1_MD		(GPIO_GUMSTIX_ETH1 | GPIO_IN)
+#define GUMSTIX_ETH1_IRQ		IRQ_GPIO(GPIO_GUMSTIX_ETH1)
+
+
+/* CF reset line */
+#define GPIO8_RESET			8
+
+/* CF slot 0 */
+#define GPIO4_nBVD1			4
+#define GPIO4_nSTSCHG			GPIO4_nBVD1
+#define GPIO11_nCD			11
+#define GPIO26_PRDY_nBSY		26
+#define GUMSTIX_S0_nSTSCHG_IRQ		IRQ_GPIO(GPIO4_nSTSCHG)
+#define GUMSTIX_S0_nCD_IRQ		IRQ_GPIO(GPIO11_nCD)
+#define GUMSTIX_S0_PRDY_nBSY_IRQ	IRQ_GPIO(GPIO26_PRDY_nBSY)
+
+/* CF slot 1 */
+#define GPIO18_nBVD1			18
+#define GPIO18_nSTSCHG			GPIO18_nBVD1
+#define GPIO36_nCD			36
+#define GPIO27_PRDY_nBSY		27
+#define GUMSTIX_S1_nSTSCHG_IRQ		IRQ_GPIO(GPIO18_nSTSCHG)
+#define GUMSTIX_S1_nCD_IRQ		IRQ_GPIO(GPIO36_nCD)
+#define GUMSTIX_S1_PRDY_nBSY_IRQ	IRQ_GPIO(GPIO27_PRDY_nBSY)
+
+/* CF GPIO line modes */
+#define GPIO4_nSTSCHG_MD		(GPIO4_nSTSCHG | GPIO_IN)
+#define GPIO8_RESET_MD			(GPIO8_RESET | GPIO_OUT)
+#define GPIO11_nCD_MD			(GPIO11_nCD | GPIO_IN)
+#define GPIO18_nSTSCHG_MD		(GPIO18_nSTSCHG | GPIO_IN)
+#define GPIO26_PRDY_nBSY_MD		(GPIO26_PRDY_nBSY | GPIO_IN)
+#define GPIO27_PRDY_nBSY_MD		(GPIO27_PRDY_nBSY | GPIO_IN)
+#define GPIO36_nCD_MD			(GPIO36_nCD | GPIO_IN)
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
new file mode 100644
index 000000000000..e89df4d0d239
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -0,0 +1,235 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/hardware.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * We requires absolute addresses.
+ */
+#define PCIO_BASE		0
+
+/*
+ * Workarounds for at least 2 errata so far require this.
+ * The mapping is set in mach-pxa/generic.c.
+ */
+#define UNCACHED_PHYS_0		0xff000000
+#define UNCACHED_ADDR		UNCACHED_PHYS_0
+
+/*
+ * Intel PXA2xx internal register mapping:
+ *
+ * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
+ * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
+ * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
+ * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
+ * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
+ * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
+ * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
+ *
+ * Note that not all PXA2xx chips implement all those addresses, and the
+ * kernel only maps the minimum needed range of this mapping.
+ */
+#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
+#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
+
+#ifndef __ASSEMBLY__
+
+# define __REG(x)	(*((volatile u32 *)io_p2v(x)))
+
+/* With indexed regs we don't want to feed the index through io_p2v()
+   especially if it is a variable, otherwise horrible code will result. */
+# define __REG2(x,y)	\
+	(*(volatile u32 *)((u32)&__REG(x) + (y)))
+
+# define __PREG(x)	(io_v2p((u32)&(x)))
+
+#else
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PXA25x
+#define __cpu_is_pxa21x(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xf3f;	\
+		_id == 0x212;				\
+	})
+
+#define __cpu_is_pxa255(id)                             \
+	({                                              \
+		unsigned int _id = (id) >> 4 & 0xfff;   \
+		_id == 0x2d0;                           \
+	 })
+
+#define __cpu_is_pxa25x(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x2d0 || _id == 0x290;		\
+	})
+#else
+#define __cpu_is_pxa21x(id)	(0)
+#define __cpu_is_pxa255(id)	(0)
+#define __cpu_is_pxa25x(id)	(0)
+#endif
+
+#ifdef CONFIG_PXA27x
+#define __cpu_is_pxa27x(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x411;				\
+	})
+#else
+#define __cpu_is_pxa27x(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA300
+#define __cpu_is_pxa300(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x688;				\
+	 })
+#else
+#define __cpu_is_pxa300(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA310
+#define __cpu_is_pxa310(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x689;				\
+	 })
+#else
+#define __cpu_is_pxa310(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA320
+#define __cpu_is_pxa320(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x603 || _id == 0x682;		\
+	 })
+#else
+#define __cpu_is_pxa320(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA930
+#define __cpu_is_pxa930(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x683;		\
+	 })
+#else
+#define __cpu_is_pxa930(id)	(0)
+#endif
+
+#define cpu_is_pxa21x()					\
+	({						\
+		__cpu_is_pxa21x(read_cpuid_id());	\
+	})
+
+#define cpu_is_pxa255()                                 \
+	({                                              \
+		__cpu_is_pxa255(read_cpuid_id());       \
+	})
+
+#define cpu_is_pxa25x()					\
+	({						\
+		__cpu_is_pxa25x(read_cpuid_id());	\
+	})
+
+#define cpu_is_pxa27x()					\
+	({						\
+		__cpu_is_pxa27x(read_cpuid_id());	\
+	})
+
+#define cpu_is_pxa300()					\
+	({						\
+		__cpu_is_pxa300(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa310()					\
+	({						\
+		__cpu_is_pxa310(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa320()					\
+	({						\
+		__cpu_is_pxa320(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa930()					\
+	({						\
+		unsigned int id = read_cpuid(CPUID_ID);	\
+		__cpu_is_pxa930(id);			\
+	 })
+
+/*
+ * CPUID Core Generation Bit
+ * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
+ * == 0x3 for pxa300/pxa310/pxa320
+ */
+#define __cpu_is_pxa2xx(id)				\
+	({						\
+		unsigned int _id = (id) >> 13 & 0x7;	\
+		_id <= 0x2;				\
+	 })
+
+#define __cpu_is_pxa3xx(id)				\
+	({						\
+		unsigned int _id = (id) >> 13 & 0x7;	\
+		_id == 0x3;				\
+	 })
+
+#define cpu_is_pxa2xx()					\
+	({						\
+		__cpu_is_pxa2xx(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa3xx()					\
+	({						\
+		__cpu_is_pxa3xx(read_cpuid_id());	\
+	 })
+
+/*
+ * Handy routine to set GPIO alternate functions
+ */
+extern int pxa_gpio_mode( int gpio_mode );
+
+/*
+ * Return GPIO level, nonzero means high, zero is low
+ */
+extern int pxa_gpio_get_value(unsigned gpio);
+
+/*
+ * Set output GPIO level
+ */
+extern void pxa_gpio_set_value(unsigned gpio, int value);
+
+/*
+ * return current memory and LCD clock frequency in units of 10kHz
+ */
+extern unsigned int get_memclk_frequency_10khz(void);
+
+#endif
+
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define PCIBIOS_MIN_IO		0
+#define PCIBIOS_MIN_MEM		0
+#define pcibios_assign_all_busses()	1
+#endif
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/mach-pxa/include/mach/i2c.h
new file mode 100644
index 000000000000..80596b013443
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/i2c.h
@@ -0,0 +1,77 @@
+/*
+ *  i2c_pxa.h
+ *
+ *  Copyright (C) 2002 Intrinsyc Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#ifndef _I2C_PXA_H_
+#define _I2C_PXA_H_
+
+#if 0
+#define DEF_TIMEOUT             3
+#else
+/* need a longer timeout if we're dealing with the fact we may well be
+ * looking at a multi-master environment
+*/
+#define DEF_TIMEOUT             32
+#endif
+
+#define BUS_ERROR               (-EREMOTEIO)
+#define XFER_NAKED              (-ECONNREFUSED)
+#define I2C_RETRY               (-2000) /* an error has occurred retry transmit */
+
+/* ICR initialize bit values
+*
+*  15. FM       0 (100 Khz operation)
+*  14. UR       0 (No unit reset)
+*  13. SADIE    0 (Disables the unit from interrupting on slave addresses
+*                                       matching its slave address)
+*  12. ALDIE    0 (Disables the unit from interrupt when it loses arbitration
+*                                       in master mode)
+*  11. SSDIE    0 (Disables interrupts from a slave stop detected, in slave mode)
+*  10. BEIE     1 (Enable interrupts from detected bus errors, no ACK sent)
+*  9.  IRFIE    1 (Enable interrupts from full buffer received)
+*  8.  ITEIE    1 (Enables the I2C unit to interrupt when transmit buffer empty)
+*  7.  GCD      1 (Disables i2c unit response to general call messages as a slave)
+*  6.  IUE      0 (Disable unit until we change settings)
+*  5.  SCLE     1 (Enables the i2c clock output for master mode (drives SCL)
+*  4.  MA       0 (Only send stop with the ICR stop bit)
+*  3.  TB       0 (We are not transmitting a byte initially)
+*  2.  ACKNAK   0 (Send an ACK after the unit receives a byte)
+*  1.  STOP     0 (Do not send a STOP)
+*  0.  START    0 (Do not send a START)
+*
+*/
+#define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
+
+/* I2C status register init values
+ *
+ * 10. BED      1 (Clear bus error detected)
+ * 9.  SAD      1 (Clear slave address detected)
+ * 7.  IRF      1 (Clear IDBR Receive Full)
+ * 6.  ITE      1 (Clear IDBR Transmit Empty)
+ * 5.  ALD      1 (Clear Arbitration Loss Detected)
+ * 4.  SSD      1 (Clear Slave Stop Detected)
+ */
+#define I2C_ISR_INIT	0x7FF  /* status register init */
+
+struct i2c_slave_client;
+
+struct i2c_pxa_platform_data {
+	unsigned int		slave_addr;
+	struct i2c_slave_client	*slave;
+	unsigned int		class;
+	int			use_pio;
+};
+
+extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
+
+#ifdef CONFIG_PXA27x
+extern void pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+#endif
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h
new file mode 100644
index 000000000000..5eff96fcc944
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/idp.h
@@ -0,0 +1,199 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/idp.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
+ *
+ * 2001-09-13: Cliff Brake <cbrake@accelent.com>
+ *             Initial code
+ *
+ * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
+ *             <http://www.vibren.com> <http://bec-systems.com>
+ *             Changes for 2.6 kernel.
+ */
+
+
+/*
+ * Note: this file must be safe to include in assembly files
+ *
+ * Support for the Vibren PXA255 IDP requires rev04 or later
+ * IDP hardware.
+ */
+
+
+#define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
+#define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)
+#define IDP_MEDIAQ_PHYS		(PXA_CS3_PHYS)
+#define IDP_IDE_PHYS		(PXA_CS5_PHYS + 0x03000000)
+#define IDP_ETH_PHYS		(PXA_CS5_PHYS + 0x03400000)
+#define IDP_COREVOLT_PHYS	(PXA_CS5_PHYS + 0x03800000)
+#define IDP_CPLD_PHYS		(PXA_CS5_PHYS + 0x03C00000)
+
+
+/*
+ * virtual memory map
+ */
+
+#define IDP_COREVOLT_VIRT	(0xf0000000)
+#define IDP_COREVOLT_SIZE	(1*1024*1024)
+
+#define IDP_CPLD_VIRT		(IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
+#define IDP_CPLD_SIZE		(1*1024*1024)
+
+#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
+#error Your custom IO space is getting a bit large !!
+#endif
+
+#define CPLD_P2V(x)		((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
+#define CPLD_V2P(x)		((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __CPLD_REG(x)		(*((volatile unsigned long *)CPLD_P2V(x)))
+#else
+#  define __CPLD_REG(x)		CPLD_P2V(x)
+#endif
+
+/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
+
+#define _IDP_CPLD_REV			(IDP_CPLD_PHYS + 0x00)
+#define _IDP_CPLD_PERIPH_PWR		(IDP_CPLD_PHYS + 0x04)
+#define _IDP_CPLD_LED_CONTROL		(IDP_CPLD_PHYS + 0x08)
+#define _IDP_CPLD_KB_COL_HIGH		(IDP_CPLD_PHYS + 0x0C)
+#define _IDP_CPLD_KB_COL_LOW		(IDP_CPLD_PHYS + 0x10)
+#define _IDP_CPLD_PCCARD_EN		(IDP_CPLD_PHYS + 0x14)
+#define _IDP_CPLD_GPIOH_DIR		(IDP_CPLD_PHYS + 0x18)
+#define _IDP_CPLD_GPIOH_VALUE		(IDP_CPLD_PHYS + 0x1C)
+#define _IDP_CPLD_GPIOL_DIR		(IDP_CPLD_PHYS + 0x20)
+#define _IDP_CPLD_GPIOL_VALUE		(IDP_CPLD_PHYS + 0x24)
+#define _IDP_CPLD_PCCARD_PWR		(IDP_CPLD_PHYS + 0x28)
+#define _IDP_CPLD_MISC_CTRL		(IDP_CPLD_PHYS + 0x2C)
+#define _IDP_CPLD_LCD			(IDP_CPLD_PHYS + 0x30)
+#define _IDP_CPLD_FLASH_WE		(IDP_CPLD_PHYS + 0x34)
+
+#define _IDP_CPLD_KB_ROW		(IDP_CPLD_PHYS + 0x50)
+#define _IDP_CPLD_PCCARD0_STATUS	(IDP_CPLD_PHYS + 0x54)
+#define _IDP_CPLD_PCCARD1_STATUS	(IDP_CPLD_PHYS + 0x58)
+#define _IDP_CPLD_MISC_STATUS		(IDP_CPLD_PHYS + 0x5C)
+
+/* FPGA register virtual addresses */
+
+#define IDP_CPLD_REV			__CPLD_REG(_IDP_CPLD_REV)
+#define IDP_CPLD_PERIPH_PWR		__CPLD_REG(_IDP_CPLD_PERIPH_PWR)
+#define IDP_CPLD_LED_CONTROL		__CPLD_REG(_IDP_CPLD_LED_CONTROL)
+#define IDP_CPLD_KB_COL_HIGH		__CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
+#define IDP_CPLD_KB_COL_LOW		__CPLD_REG(_IDP_CPLD_KB_COL_LOW)
+#define IDP_CPLD_PCCARD_EN		__CPLD_REG(_IDP_CPLD_PCCARD_EN)
+#define IDP_CPLD_GPIOH_DIR		__CPLD_REG(_IDP_CPLD_GPIOH_DIR)
+#define IDP_CPLD_GPIOH_VALUE		__CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
+#define IDP_CPLD_GPIOL_DIR		__CPLD_REG(_IDP_CPLD_GPIOL_DIR)
+#define IDP_CPLD_GPIOL_VALUE		__CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
+#define IDP_CPLD_PCCARD_PWR		__CPLD_REG(_IDP_CPLD_PCCARD_PWR)
+#define IDP_CPLD_MISC_CTRL		__CPLD_REG(_IDP_CPLD_MISC_CTRL)
+#define IDP_CPLD_LCD			__CPLD_REG(_IDP_CPLD_LCD)
+#define IDP_CPLD_FLASH_WE		__CPLD_REG(_IDP_CPLD_FLASH_WE)
+
+#define IDP_CPLD_KB_ROW		        __CPLD_REG(_IDP_CPLD_KB_ROW)
+#define IDP_CPLD_PCCARD0_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
+#define IDP_CPLD_PCCARD1_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
+#define IDP_CPLD_MISC_STATUS		__CPLD_REG(_IDP_CPLD_MISC_STATUS)
+
+
+/*
+ * Bit masks for various registers
+ */
+
+// IDP_CPLD_PCCARD_PWR
+#define PCC0_PWR0	(1 << 0)
+#define PCC0_PWR1	(1 << 1)
+#define PCC0_PWR2	(1 << 2)
+#define PCC0_PWR3	(1 << 3)
+#define PCC1_PWR0	(1 << 4)
+#define PCC1_PWR1	(1 << 5)
+#define PCC1_PWR2	(1 << 6)
+#define PCC1_PWR3	(1 << 7)
+
+// IDP_CPLD_PCCARD_EN
+#define PCC0_RESET	(1 << 6)
+#define PCC1_RESET	(1 << 7)
+#define PCC0_ENABLE	(1 << 0)
+#define PCC1_ENABLE	(1 << 1)
+
+// IDP_CPLD_PCCARDx_STATUS
+#define _PCC_WRPROT	(1 << 7) // 7-4 read as low true
+#define _PCC_RESET	(1 << 6)
+#define _PCC_IRQ	(1 << 5)
+#define _PCC_INPACK	(1 << 4)
+#define PCC_BVD2	(1 << 3)
+#define PCC_BVD1	(1 << 2)
+#define PCC_VS2		(1 << 1)
+#define PCC_VS1		(1 << 0)
+
+#define PCC_DETECT(x)	(GPLR(7 + (x)) & GPIO_bit(7 + (x)))
+
+/* A listing of interrupts used by external hardware devices */
+
+#define TOUCH_PANEL_IRQ			IRQ_GPIO(5)
+#define IDE_IRQ				IRQ_GPIO(21)
+
+#define TOUCH_PANEL_IRQ_EDGE		IRQ_TYPE_EDGE_FALLING
+
+#define ETHERNET_IRQ			IRQ_GPIO(4)
+#define ETHERNET_IRQ_EDGE		IRQ_TYPE_EDGE_RISING
+
+#define IDE_IRQ_EDGE			IRQ_TYPE_EDGE_RISING
+
+#define PCMCIA_S0_CD_VALID		IRQ_GPIO(7)
+#define PCMCIA_S0_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
+
+#define PCMCIA_S1_CD_VALID		IRQ_GPIO(8)
+#define PCMCIA_S1_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
+
+#define PCMCIA_S0_RDYINT		IRQ_GPIO(19)
+#define PCMCIA_S1_RDYINT		IRQ_GPIO(22)
+
+
+/*
+ * Macros for LED Driver
+ */
+
+/* leds 0 = ON */
+#define IDP_HB_LED	(1<<5)
+#define IDP_BUSY_LED	(1<<6)
+
+#define IDP_LEDS_MASK	(IDP_HB_LED | IDP_BUSY_LED)
+
+/*
+ * macros for MTD driver
+ */
+
+#define FLASH_WRITE_PROTECT_DISABLE()	((IDP_CPLD_FLASH_WE) &= ~(0x1))
+#define FLASH_WRITE_PROTECT_ENABLE()	((IDP_CPLD_FLASH_WE) |= (0x1))
+
+/*
+ * macros for matrix keyboard driver
+ */
+
+#define KEYBD_MATRIX_NUMBER_INPUTS	7
+#define KEYBD_MATRIX_NUMBER_OUTPUTS	14
+
+#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC	FALSE
+#define KEYBD_MATRIX_INVERT_INPUT_LOGIC		FALSE
+
+#define KEYBD_MATRIX_SETTLING_TIME_US			100
+#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT		2
+
+#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
+{\
+	IDP_CPLD_KB_COL_LOW = outputs;\
+	IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
+}
+
+#define KEYBD_MATRIX_GET_INPUTS(inputs) \
+{\
+	inputs = (IDP_CPLD_KB_ROW & 0x7f);\
+}
+
+
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
new file mode 100644
index 000000000000..600fd4f76603
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-pxa/include/mach/io.h
+ *
+ * Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/irda.h b/arch/arm/mach-pxa/include/mach/irda.h
new file mode 100644
index 000000000000..0a50c3c763df
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/irda.h
@@ -0,0 +1,23 @@
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_OFF		1
+#define IR_SIRMODE	2
+#define IR_FIRMODE	4
+
+struct pxaficp_platform_data {
+	int transceiver_cap;
+	void (*transceiver_mode)(struct device *dev, int mode);
+	int (*startup)(struct device *dev);
+	void (*shutdown)(struct device *dev);
+};
+
+extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
+
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+void pxa2xx_transceiver_mode(struct device *dev, int mode);
+#endif
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
new file mode 100644
index 000000000000..32772bc6925c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -0,0 +1,264 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/irqs.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#define PXA_IRQ(x)	(x)
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
+#define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */
+#define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI) */
+#define IRQ_USBH1	PXA_IRQ(3)	/* USB Host interrupt 2 (non-OHCI) */
+#define IRQ_KEYPAD	PXA_IRQ(4)	/* Key pad controller */
+#define IRQ_MEMSTK	PXA_IRQ(5)	/* Memory Stick interrupt */
+#define IRQ_PWRI2C	PXA_IRQ(6)	/* Power I2C interrupt */
+#endif
+
+#define IRQ_HWUART	PXA_IRQ(7)	/* HWUART Transmit/Receive/Error (PXA26x) */
+#define IRQ_OST_4_11	PXA_IRQ(7)	/* OS timer 4-11 matches (PXA27x) */
+#define	IRQ_GPIO0	PXA_IRQ(8)	/* GPIO0 Edge Detect */
+#define	IRQ_GPIO1	PXA_IRQ(9)	/* GPIO1 Edge Detect */
+#define	IRQ_GPIO_2_x	PXA_IRQ(10)	/* GPIO[2-x] Edge Detect */
+#define	IRQ_USB		PXA_IRQ(11)	/* USB Service */
+#define	IRQ_PMU		PXA_IRQ(12)	/* Performance Monitoring Unit */
+#define	IRQ_I2S		PXA_IRQ(13)	/* I2S Interrupt */
+#define	IRQ_AC97	PXA_IRQ(14)	/* AC97 Interrupt */
+#define IRQ_ASSP	PXA_IRQ(15)	/* Audio SSP Service Request (PXA25x) */
+#define IRQ_USIM	PXA_IRQ(15)     /* Smart Card interface interrupt (PXA27x) */
+#define IRQ_NSSP	PXA_IRQ(16)	/* Network SSP Service Request (PXA25x) */
+#define IRQ_SSP2	PXA_IRQ(16)	/* SSP2 interrupt (PXA27x) */
+#define	IRQ_LCD		PXA_IRQ(17)	/* LCD Controller Service Request */
+#define	IRQ_I2C		PXA_IRQ(18)	/* I2C Service Request */
+#define	IRQ_ICP		PXA_IRQ(19)	/* ICP Transmit/Receive/Error */
+#define	IRQ_STUART	PXA_IRQ(20)	/* STUART Transmit/Receive/Error */
+#define	IRQ_BTUART	PXA_IRQ(21)	/* BTUART Transmit/Receive/Error */
+#define	IRQ_FFUART	PXA_IRQ(22)	/* FFUART Transmit/Receive/Error*/
+#define	IRQ_MMC		PXA_IRQ(23)	/* MMC Status/Error Detection */
+#define	IRQ_SSP		PXA_IRQ(24)	/* SSP Service Request */
+#define	IRQ_DMA 	PXA_IRQ(25)	/* DMA Channel Service Request */
+#define	IRQ_OST0 	PXA_IRQ(26)	/* OS Timer match 0 */
+#define	IRQ_OST1 	PXA_IRQ(27)	/* OS Timer match 1 */
+#define	IRQ_OST2 	PXA_IRQ(28)	/* OS Timer match 2 */
+#define	IRQ_OST3 	PXA_IRQ(29)	/* OS Timer match 3 */
+#define	IRQ_RTC1Hz	PXA_IRQ(30)	/* RTC HZ Clock Tick */
+#define	IRQ_RTCAlrm	PXA_IRQ(31)	/* RTC Alarm */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define IRQ_TPM		PXA_IRQ(32)	/* TPM interrupt */
+#define IRQ_CAMERA	PXA_IRQ(33)	/* Camera Interface */
+#endif
+
+#ifdef CONFIG_PXA3xx
+#define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request */
+#define IRQ_CIR		PXA_IRQ(34)	/* Consumer IR */
+#define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
+#define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
+#define IRQ_GRPHICS	PXA_IRQ(39)	/* Graphics Controller */
+#define IRQ_MMC2	PXA_IRQ(41)	/* MMC2 Controller */
+#define IRQ_1WIRE	PXA_IRQ(44)	/* 1-Wire Controller */
+#define IRQ_NAND	PXA_IRQ(45)	/* NAND Controller */
+#define IRQ_USB2	PXA_IRQ(46)	/* USB 2.0 Device Controller */
+#define IRQ_WAKEUP0	PXA_IRQ(49)	/* EXT_WAKEUP0 */
+#define IRQ_WAKEUP1	PXA_IRQ(50)	/* EXT_WAKEUP1 */
+#define IRQ_DMEMC	PXA_IRQ(51)	/* Dynamic Memory Controller */
+#define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
+#endif
+
+#define PXA_GPIO_IRQ_BASE	(64)
+#define PXA_GPIO_IRQ_NUM	(128)
+
+#define GPIO_2_x_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
+#define IRQ_GPIO(x)	(((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
+
+#define IRQ_TO_GPIO_2_x(i)	((i) - PXA_GPIO_IRQ_BASE)
+#define IRQ_TO_GPIO(i)	(((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
+
+/*
+ * The next 16 interrupts are for board specific purposes.  Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these.  If you need more, increase IRQ_BOARD_END, but keep it
+ * within sensible limits.
+ */
+#define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
+
+#define IRQ_SA1111_START	(IRQ_BOARD_END)
+#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
+#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
+#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
+#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
+#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
+#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
+#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
+#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
+#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
+#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
+#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
+#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
+#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
+#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
+#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
+#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
+#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
+#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
+#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
+#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
+#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
+#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
+#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
+#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
+#define SSPXMTINT		(IRQ_BOARD_END + 24)
+#define SSPRCVINT		(IRQ_BOARD_END + 25)
+#define SSPROR			(IRQ_BOARD_END + 26)
+#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
+#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
+#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
+#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
+#define AUDTFSR			(IRQ_BOARD_END + 36)
+#define AUDRFSR			(IRQ_BOARD_END + 37)
+#define AUDTUR			(IRQ_BOARD_END + 38)
+#define AUDROR			(IRQ_BOARD_END + 39)
+#define AUDDTS			(IRQ_BOARD_END + 40)
+#define AUDRDD			(IRQ_BOARD_END + 41)
+#define AUDSTO			(IRQ_BOARD_END + 42)
+#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
+#define IRQ_HCIM		(IRQ_BOARD_END + 44)
+#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
+#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
+#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
+#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
+#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
+#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
+#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
+#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
+#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
+#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
+
+#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
+#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
+#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
+#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
+#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
+#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
+#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
+#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
+#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
+#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
+#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
+#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
+#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
+#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
+#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
+#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
+#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
+#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
+#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
+#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
+#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
+#define IRQ_LOCOMO_SPI_OVRN	(IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
+
+/*
+ * Figure out the MAX IRQ number.
+ *
+ * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
+ * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * Otherwise, we have the standard IRQs only.
+ */
+#ifdef CONFIG_SA1111
+#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
+#elif defined(CONFIG_SHARP_LOCOMO)
+#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
+#elif defined(CONFIG_ARCH_LUBBOCK) || \
+      defined(CONFIG_MACH_LOGICPD_PXA270) || \
+      defined(CONFIG_MACH_TOSA) || \
+      defined(CONFIG_MACH_MAINSTONE) || \
+      defined(CONFIG_MACH_PCM027) || \
+      defined(CONFIG_MACH_MAGICIAN)
+#define NR_IRQS			(IRQ_BOARD_END)
+#elif defined(CONFIG_MACH_ZYLONITE)
+#define NR_IRQS			(IRQ_BOARD_START + 32)
+#else
+#define NR_IRQS			(IRQ_BOARD_START)
+#endif
+
+/*
+ * Board specific IRQs.  Define them here.
+ * Do not surround them with ifdefs.
+ */
+#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
+#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
+#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
+#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
+#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
+#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
+#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
+#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
+
+#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LPD270_USBC_IRQ		LPD270_IRQ(2)
+#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
+#define LPD270_AC97_IRQ		LPD270_IRQ(4)
+
+#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
+#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
+#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
+#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
+#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
+#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
+#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
+#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
+#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
+#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
+#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
+#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
+#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
+#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
+#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
+
+/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
+#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
+#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
+#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
+#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
+
+/* phyCORE-PXA270 (PCM027) Interrupts */
+#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
+#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
+#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
+#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
+#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
+
+/* ITE8152 irqs */
+/* add IT8152 IRQs beyond BOARD_END */
+#ifdef CONFIG_PCI_HOST_ITE8152
+#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
+
+/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
+#define IT8152_LD_IRQ_COUNT     9
+#define IT8152_LP_IRQ_COUNT     16
+#define IT8152_PD_IRQ_COUNT     15
+
+/* Priorities: */
+#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
+#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
+#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
+
+#define IT8152_LAST_IRQ         IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
+
+#if NR_IRQS < (IT8152_LAST_IRQ+1)
+#undef NR_IRQS
+#define NR_IRQS (IT8152_LAST_IRQ+1)
+#endif
+
+#endif /* CONFIG_PCI_HOST_ITE8152 */
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
new file mode 100644
index 000000000000..79d209b826f4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_ZYLONITE_H
+#define __ASM_ARCH_ZYLONITE_H
+
+#define LITTLETON_ETH_PHYS	0x30000000
+
+#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
new file mode 100644
index 000000000000..f89fb715266b
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-pxa/include/mach/lpd270.h
+ *
+ * Author:	Lennert Buytenhek
+ * Created:	Feb 10, 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_LPD270_H
+#define __ASM_ARCH_LPD270_H
+
+#define LPD270_CPLD_PHYS	PXA_CS2_PHYS
+#define LPD270_CPLD_VIRT	0xf0000000
+#define LPD270_CPLD_SIZE	0x00100000
+
+#define LPD270_ETH_PHYS		(PXA_CS2_PHYS + 0x01000000)
+
+/* CPLD registers  */
+#define LPD270_CPLD_REG(x)	((unsigned long)(LPD270_CPLD_VIRT + (x)))
+#define LPD270_CONTROL		LPD270_CPLD_REG(0x00)
+#define LPD270_PERIPHERAL0	LPD270_CPLD_REG(0x04)
+#define LPD270_PERIPHERAL1	LPD270_CPLD_REG(0x08)
+#define LPD270_CPLD_REVISION	LPD270_CPLD_REG(0x14)
+#define LPD270_EEPROM_SPI_ITF	LPD270_CPLD_REG(0x20)
+#define LPD270_MODE_PINS	LPD270_CPLD_REG(0x24)
+#define LPD270_EGPIO		LPD270_CPLD_REG(0x30)
+#define LPD270_INT_MASK		LPD270_CPLD_REG(0x40)
+#define LPD270_INT_STATUS	LPD270_CPLD_REG(0x50)
+
+#define LPD270_INT_AC97		(1 << 4)  /* AC'97 CODEC IRQ */
+#define LPD270_INT_ETHERNET	(1 << 3)  /* Ethernet controller IRQ */
+#define LPD270_INT_USBC		(1 << 2)  /* USB client cable detection IRQ */
+
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
new file mode 100644
index 000000000000..4cb24154a5a8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/lubbock.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define LUBBOCK_ETH_PHYS	PXA_CS3_PHYS
+
+#define LUBBOCK_FPGA_PHYS	PXA_CS2_PHYS
+#define LUBBOCK_FPGA_VIRT	(0xf0000000)
+#define LUB_P2V(x)		((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT)
+#define LUB_V2P(x)		((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __LUB_REG(x)		(*((volatile unsigned long *)LUB_P2V(x)))
+#else
+#  define __LUB_REG(x)		LUB_P2V(x)
+#endif
+
+/* FPGA register virtual addresses */
+#define LUB_WHOAMI		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
+#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
+#define LUB_DISC_BLNK_LED	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
+#define LUB_CONF_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
+#define LUB_USER_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
+#define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
+#define LUB_MISC_RD		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x090)
+#define LUB_IRQ_MASK_EN		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0)
+#define LUB_IRQ_SET_CLR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
+#define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
+
+#ifndef __ASSEMBLY__
+extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
new file mode 100644
index 000000000000..38d68d99f585
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -0,0 +1,117 @@
+/*
+ * GPIO and IRQ definitions for HTC Magician PDA phones
+ *
+ * Copyright (c) 2007 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MAGICIAN_H_
+#define _MAGICIAN_H_
+
+#include <mach/irqs.h>
+
+/*
+ * PXA GPIOs
+ */
+
+#define GPIO0_MAGICIAN_KEY_POWER		0
+#define GPIO9_MAGICIAN_UNKNOWN			9
+#define GPIO10_MAGICIAN_GSM_IRQ			10
+#define GPIO11_MAGICIAN_GSM_OUT1		11
+#define GPIO13_MAGICIAN_CPLD_IRQ		13
+#define GPIO18_MAGICIAN_UNKNOWN			18
+#define GPIO22_MAGICIAN_VIBRA_EN		22
+#define GPIO26_MAGICIAN_GSM_POWER		26
+#define GPIO27_MAGICIAN_USBC_PUEN		27
+#define GPIO30_MAGICIAN_nCHARGE_EN		30
+#define GPIO37_MAGICIAN_KEY_HANGUP		37
+#define GPIO38_MAGICIAN_KEY_CONTACTS		38
+#define GPIO40_MAGICIAN_GSM_OUT2		40
+#define GPIO48_MAGICIAN_UNKNOWN			48
+#define GPIO56_MAGICIAN_UNKNOWN			56
+#define GPIO57_MAGICIAN_CAM_RESET		57
+#define GPIO75_MAGICIAN_SAMSUNG_POWER		75
+#define GPIO83_MAGICIAN_nIR_EN			83
+#define GPIO86_MAGICIAN_GSM_RESET		86
+#define GPIO87_MAGICIAN_GSM_SELECT		87
+#define GPIO90_MAGICIAN_KEY_CALENDAR		90
+#define GPIO91_MAGICIAN_KEY_CAMERA		91
+#define GPIO93_MAGICIAN_KEY_UP			93
+#define GPIO94_MAGICIAN_KEY_DOWN		94
+#define GPIO95_MAGICIAN_KEY_LEFT		95
+#define GPIO96_MAGICIAN_KEY_RIGHT		96
+#define GPIO97_MAGICIAN_KEY_ENTER		97
+#define GPIO98_MAGICIAN_KEY_RECORD		98
+#define GPIO99_MAGICIAN_HEADPHONE_IN		99
+#define GPIO100_MAGICIAN_KEY_VOL_UP		100
+#define GPIO101_MAGICIAN_KEY_VOL_DOWN 		101
+#define GPIO102_MAGICIAN_KEY_PHONE		102
+#define GPIO103_MAGICIAN_LED_KP			103
+#define GPIO104_MAGICIAN_LCD_POWER_1 		104
+#define GPIO105_MAGICIAN_LCD_POWER_2		105
+#define GPIO106_MAGICIAN_LCD_POWER_3		106
+#define GPIO107_MAGICIAN_DS1WM_IRQ		107
+#define GPIO108_MAGICIAN_GSM_READY		108
+#define GPIO114_MAGICIAN_UNKNOWN		114
+#define GPIO115_MAGICIAN_nPEN_IRQ		115
+#define GPIO116_MAGICIAN_nCAM_EN		116
+#define GPIO119_MAGICIAN_UNKNOWN		119
+#define GPIO120_MAGICIAN_UNKNOWN		120
+
+/*
+ * CPLD IRQs
+ */
+
+#define IRQ_MAGICIAN_SD		(IRQ_BOARD_START + 0)
+#define IRQ_MAGICIAN_EP		(IRQ_BOARD_START + 1)
+#define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)
+#define IRQ_MAGICIAN_AC		(IRQ_BOARD_START + 3)
+
+/*
+ * CPLD EGPIOs
+ */
+
+#define MAGICIAN_EGPIO_BASE			0x80 /* GPIO_BOARD_START */
+#define MAGICIAN_EGPIO(reg,bit) \
+	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
+
+/* output */
+
+#define EGPIO_MAGICIAN_TOPPOLY_POWER		MAGICIAN_EGPIO(0, 2)
+#define EGPIO_MAGICIAN_LED_POWER		MAGICIAN_EGPIO(0, 5)
+#define EGPIO_MAGICIAN_GSM_RESET		MAGICIAN_EGPIO(0, 6)
+#define EGPIO_MAGICIAN_LCD_POWER		MAGICIAN_EGPIO(0, 7)
+#define EGPIO_MAGICIAN_SPK_POWER		MAGICIAN_EGPIO(1, 0)
+#define EGPIO_MAGICIAN_EP_POWER			MAGICIAN_EGPIO(1, 1)
+#define EGPIO_MAGICIAN_IN_SEL0			MAGICIAN_EGPIO(1, 2)
+#define EGPIO_MAGICIAN_IN_SEL1			MAGICIAN_EGPIO(1, 3)
+#define EGPIO_MAGICIAN_MIC_POWER		MAGICIAN_EGPIO(1, 4)
+#define EGPIO_MAGICIAN_CODEC_RESET		MAGICIAN_EGPIO(1, 5)
+#define EGPIO_MAGICIAN_CODEC_POWER		MAGICIAN_EGPIO(1, 6)
+#define EGPIO_MAGICIAN_BL_POWER			MAGICIAN_EGPIO(1, 7)
+#define EGPIO_MAGICIAN_SD_POWER			MAGICIAN_EGPIO(2, 0)
+#define EGPIO_MAGICIAN_CARKIT_MIC		MAGICIAN_EGPIO(2, 1)
+#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL	MAGICIAN_EGPIO(2, 2)
+#define EGPIO_MAGICIAN_FLASH_VPP		MAGICIAN_EGPIO(2, 3)
+#define EGPIO_MAGICIAN_BL_POWER2		MAGICIAN_EGPIO(2, 4)
+#define EGPIO_MAGICIAN_CHARGE_EN		MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_GSM_POWER		MAGICIAN_EGPIO(2, 7)
+
+/* input */
+
+#define EGPIO_MAGICIAN_CABLE_STATE_AC		MAGICIAN_EGPIO(4, 0)
+#define EGPIO_MAGICIAN_CABLE_STATE_USB		MAGICIAN_EGPIO(4, 1)
+
+#define EGPIO_MAGICIAN_BOARD_ID0		MAGICIAN_EGPIO(5, 0)
+#define EGPIO_MAGICIAN_BOARD_ID1		MAGICIAN_EGPIO(5, 1)
+#define EGPIO_MAGICIAN_BOARD_ID2		MAGICIAN_EGPIO(5, 2)
+#define EGPIO_MAGICIAN_LCD_SELECT		MAGICIAN_EGPIO(5, 3)
+#define EGPIO_MAGICIAN_nSD_READONLY		MAGICIAN_EGPIO(5, 4)
+
+#define EGPIO_MAGICIAN_EP_INSERT		MAGICIAN_EGPIO(6, 1)
+
+#endif /* _MAGICIAN_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
new file mode 100644
index 000000000000..3461c4302ff4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -0,0 +1,120 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/mainstone.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Nov 14, 2002
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_MAINSTONE_H
+#define ASM_ARCH_MAINSTONE_H
+
+#define MST_ETH_PHYS		PXA_CS4_PHYS
+
+#define MST_FPGA_PHYS		PXA_CS2_PHYS
+#define MST_FPGA_VIRT		(0xf0000000)
+#define MST_P2V(x)		((x) - MST_FPGA_PHYS + MST_FPGA_VIRT)
+#define MST_V2P(x)		((x) - MST_FPGA_VIRT + MST_FPGA_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __MST_REG(x)		(*((volatile unsigned long *)MST_P2V(x)))
+#else
+# define __MST_REG(x)		MST_P2V(x)
+#endif
+
+/* board level registers in the FPGA */
+
+#define MST_LEDDAT1		__MST_REG(0x08000010)
+#define MST_LEDDAT2		__MST_REG(0x08000014)
+#define MST_LEDCTRL		__MST_REG(0x08000040)
+#define MST_GPSWR		__MST_REG(0x08000060)
+#define MST_MSCWR1		__MST_REG(0x08000080)
+#define MST_MSCWR2		__MST_REG(0x08000084)
+#define MST_MSCWR3		__MST_REG(0x08000088)
+#define MST_MSCRD		__MST_REG(0x08000090)
+#define MST_INTMSKENA		__MST_REG(0x080000c0)
+#define MST_INTSETCLR		__MST_REG(0x080000d0)
+#define MST_PCMCIA0		__MST_REG(0x080000e0)
+#define MST_PCMCIA1		__MST_REG(0x080000e4)
+
+#define MST_MSCWR1_CAMERA_ON	(1 << 15)  /* Camera interface power control */
+#define MST_MSCWR1_CAMERA_SEL	(1 << 14)  /* Camera interface mux control */
+#define MST_MSCWR1_LCD_CTL	(1 << 13)  /* General-purpose LCD control */
+#define MST_MSCWR1_MS_ON	(1 << 12)  /* Memory Stick power control */
+#define MST_MSCWR1_MMC_ON	(1 << 11)  /* MultiMediaCard* power control */
+#define MST_MSCWR1_MS_SEL	(1 << 10)  /* SD/MS multiplexer control */
+#define MST_MSCWR1_BB_SEL	(1 << 9)   /* PCMCIA/Baseband multiplexer */
+#define MST_MSCWR1_BT_ON	(1 << 8)   /* Bluetooth UART transceiver */
+#define MST_MSCWR1_BTDTR	(1 << 7)   /* Bluetooth UART DTR */
+
+#define MST_MSCWR1_IRDA_MASK	(3 << 5)   /* IrDA transceiver mode */
+#define MST_MSCWR1_IRDA_FULL	(0 << 5)   /* full distance power */
+#define MST_MSCWR1_IRDA_OFF	(1 << 5)   /* shutdown */
+#define MST_MSCWR1_IRDA_MED	(2 << 5)   /* 2/3 distance power */
+#define MST_MSCWR1_IRDA_LOW	(3 << 5)   /* 1/3 distance power */
+
+#define MST_MSCWR1_IRDA_FIR	(1 << 4)   /* IrDA transceiver SIR/FIR */
+#define MST_MSCWR1_GREENLED	(1 << 3)   /* LED D1 control */
+#define MST_MSCWR1_PDC_CTL	(1 << 2)   /* reserved */
+#define MST_MSCWR1_MTR_ON	(1 << 1)   /* Silent alert motor */
+#define MST_MSCWR1_SYSRESET	(1 << 0)   /* System reset */
+
+#define MST_MSCWR2_USB_OTG_RST	(1 << 6)   /* USB On The Go reset */
+#define MST_MSCWR2_USB_OTG_SEL	(1 << 5)   /* USB On The Go control */
+#define MST_MSCWR2_nUSBC_SC	(1 << 4)   /* USB client soft connect control */
+#define MST_MSCWR2_I2S_SPKROFF	(1 << 3)   /* I2S CODEC amplifier control */
+#define MST_MSCWR2_AC97_SPKROFF	(1 << 2)   /* AC97 CODEC amplifier control */
+#define MST_MSCWR2_RADIO_PWR	(1 << 1)   /* Radio module power control */
+#define MST_MSCWR2_RADIO_WAKE	(1 << 0)   /* Radio module wake-up signal */
+
+#define MST_MSCWR3_GPIO_RESET_EN	(1 << 2) /* Enable GPIO Reset */
+#define MST_MSCWR3_GPIO_RESET		(1 << 1) /* Initiate a GPIO Reset */
+#define MST_MSCWR3_COMMS_SW_RESET	(1 << 0) /* Communications Processor Reset Control */
+
+#define MST_MSCRD_nPENIRQ	(1 << 9)   /* ADI7873* nPENIRQ signal */
+#define MST_MSCRD_nMEMSTK_CD	(1 << 8)   /* Memory Stick detection signal */
+#define MST_MSCRD_nMMC_CD	(1 << 7)   /* SD/MMC card detection signal */
+#define MST_MSCRD_nUSIM_CD	(1 << 6)   /* USIM card detection signal */
+#define MST_MSCRD_USB_CBL	(1 << 5)   /* USB client cable status */
+#define MST_MSCRD_TS_BUSY	(1 << 4)   /* ADI7873 busy */
+#define MST_MSCRD_BTDSR		(1 << 3)   /* Bluetooth UART DSR */
+#define MST_MSCRD_BTRI		(1 << 2)   /* Bluetooth UART Ring Indicator */
+#define MST_MSCRD_BTDCD		(1 << 1)   /* Bluetooth UART DCD */
+#define MST_MSCRD_nMMC_WP	(1 << 0)   /* SD/MMC write-protect status */
+
+#define MST_INT_S1_IRQ		(1 << 15)  /* PCMCIA socket 1 IRQ */
+#define MST_INT_S1_STSCHG	(1 << 14)  /* PCMCIA socket 1 status changed */
+#define MST_INT_S1_CD		(1 << 13)  /* PCMCIA socket 1 card detection */
+#define MST_INT_S0_IRQ		(1 << 11)  /* PCMCIA socket 0 IRQ */
+#define MST_INT_S0_STSCHG	(1 << 10)  /* PCMCIA socket 0 status changed */
+#define MST_INT_S0_CD		(1 << 9)   /* PCMCIA socket 0 card detection */
+#define MST_INT_nEXBRD_INT	(1 << 7)   /* Expansion board IRQ */
+#define MST_INT_MSINS		(1 << 6)   /* Memory Stick* detection */
+#define MST_INT_PENIRQ		(1 << 5)   /* ADI7873* touch-screen IRQ */
+#define MST_INT_AC97		(1 << 4)   /* AC'97 CODEC IRQ */
+#define MST_INT_ETHERNET	(1 << 3)   /* Ethernet controller IRQ */
+#define MST_INT_USBC		(1 << 2)   /* USB client cable detection IRQ */
+#define MST_INT_USIM		(1 << 1)   /* USIM card detection IRQ */
+#define MST_INT_MMC		(1 << 0)   /* MMC/SD card detection IRQ */
+
+#define MST_PCMCIA_nIRQ		(1 << 10)  /* IRQ / ready signal */
+#define MST_PCMCIA_nSPKR_BVD2	(1 << 9)   /* VDD sense / digital speaker */
+#define MST_PCMCIA_nSTSCHG_BVD1	(1 << 8)   /* VDD sense / card status changed */
+#define MST_PCMCIA_nVS2		(1 << 7)   /* VSS voltage sense */
+#define MST_PCMCIA_nVS1		(1 << 6)   /* VSS voltage sense */
+#define MST_PCMCIA_nCD		(1 << 5)   /* Card detection signal */
+#define MST_PCMCIA_RESET	(1 << 4)   /* Card reset signal */
+#define MST_PCMCIA_PWR_MASK	(0x000f)   /* MAX1602 power-supply controls */
+
+#define MST_PCMCIA_PWR_VPP_0    0x0	   /* voltage VPP = 0V */
+#define MST_PCMCIA_PWR_VPP_120  0x2 	   /* voltage VPP = 12V*/
+#define MST_PCMCIA_PWR_VPP_VCC  0x1	   /* voltage VPP = VCC */
+#define MST_PCMCIA_PWR_VCC_0    0x0	   /* voltage VCC = 0V */
+#define MST_PCMCIA_PWR_VCC_33   0x8	   /* voltage VCC = 3.3V */
+#define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
new file mode 100644
index 000000000000..552eb7fa6579
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -0,0 +1,52 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/memory.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0xa0000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+/*
+ * The nodes are matched with the physical SDRAM banks as follows:
+ *
+ * 	node 0:  0xa0000000-0xa3ffffff	-->  0xc0000000-0xc3ffffff
+ * 	node 1:  0xa4000000-0xa7ffffff	-->  0xc4000000-0xc7ffffff
+ * 	node 2:  0xa8000000-0xabffffff	-->  0xc8000000-0xcbffffff
+ * 	node 3:  0xac000000-0xafffffff	-->  0xcc000000-0xcfffffff
+ *
+ * This needs a node mem size of 26 bits.
+ */
+#define NODE_MEM_SIZE_BITS	26
+
+#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+void cmx270_pci_adjust_zones(int node, unsigned long *size,
+			     unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+	cmx270_pci_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
+#endif
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
new file mode 100644
index 000000000000..6c8e72238bfd
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -0,0 +1,161 @@
+#ifndef __ASM_ARCH_MFP_PXA25X_H
+#define __ASM_ARCH_MFP_PXA25X_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa2xx.h>
+
+/* GPIO */
+#define GPIO2_GPIO		MFP_CFG_IN(GPIO2, AF0)
+#define GPIO3_GPIO		MFP_CFG_IN(GPIO3, AF0)
+#define GPIO4_GPIO		MFP_CFG_IN(GPIO4, AF0)
+#define GPIO5_GPIO		MFP_CFG_IN(GPIO5, AF0)
+#define GPIO6_GPIO		MFP_CFG_IN(GPIO6, AF0)
+#define GPIO7_GPIO		MFP_CFG_IN(GPIO7, AF0)
+#define GPIO8_GPIO		MFP_CFG_IN(GPIO8, AF0)
+
+#define GPIO1_RST		MFP_CFG_IN(GPIO1, AF1)
+
+/* Crystal and Clock Signals */
+#define GPIO10_RTCCLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO70_RTC_CLK		MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
+#define GPIO7_48MHz		MFP_CFG_OUT(GPIO7,  AF1, DRIVE_LOW)
+#define GPIO11_3_6MHz		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO71_3_6MHz		MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
+#define GPIO12_32KHz		MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+#define GPIO72_32kHz		MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO15_nCS_1		MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2		MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3		MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4		MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5		MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO18_RDY		MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0		MFP_CFG_IN(GPIO20, AF1)
+#define GPIO19_DREQ_1		MFP_CFG_IN(GPIO19, AF1)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO13_MBGNT		MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW)
+#define GPIO73_MBGNT		MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW)
+#define GPIO14_MBREQ		MFP_CFG_IN(GPIO14, AF1)
+#define GPIO66_MBREQ		MFP_CFG_IN(GPIO66, AF1)
+
+/* PC CARD */
+#define GPIO52_nPCE_1		MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH)
+#define GPIO53_nPCE_2		MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH)
+#define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE		MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE		MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
+#define GPIO54_nPSKTSEL		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+
+/* FFUART */
+#define GPIO34_FFUART_RXD	MFP_CFG_IN(GPIO34, AF1)
+#define GPIO35_FFUART_CTS	MFP_CFG_IN(GPIO35, AF1)
+#define GPIO36_FFUART_DCD	MFP_CFG_IN(GPIO36, AF1)
+#define GPIO37_FFUART_DSR	MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI	MFP_CFG_IN(GPIO38, AF1)
+#define GPIO39_FFUART_TXD	MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR	MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS	MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO42_BTUART_RXD	MFP_CFG_IN(GPIO42, AF1)
+#define GPIO43_BTUART_TXD	MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+#define GPIO44_BTUART_CTS	MFP_CFG_IN(GPIO44, AF1)
+#define GPIO45_BTUART_RTS	MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+
+/* STUART */
+#define GPIO46_STUART_RXD	MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD	MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* HWUART */
+#define GPIO42_HWUART_RXD	MFP_CFG_IN(GPIO42, AF3)
+#define GPIO43_HWUART_TXD	MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH)
+#define GPIO44_HWUART_CTS	MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_HWUART_RTS	MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH)
+#define GPIO48_HWUART_TXD	MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH)
+#define GPIO49_HWUART_RXD	MFP_CFG_IN(GPIO49, AF1)
+#define GPIO50_HWUART_CTS	MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_HWUART_RTS	MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO46_FICP_RXD		MFP_CFG_IN(GPIO46, AF1)
+#define GPIO47_FICP_TXD		MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1 */
+#define GPIO16_PWM0_OUT		MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT		MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO28_AC97_BITCLK	MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO29, AF1)
+#define GPIO30_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO31_AC97_SYNC	MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO32_AC97_SDATA_IN_1	MFP_CFG_IN(GPIO32, AF1)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN	MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN	MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC		MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO32_I2S_SYSCLK	MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM	MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW)
+#define GPIO25_SSP1_TXD		MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO26_SSP1_RXD		MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_EXTCLK	MFP_CFG_IN(GPIO27, AF1)
+
+/* SSP 2 - NSSP */
+#define GPIO81_SSP2_CLK_OUT 	MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO81_SSP2_CLK_IN  	MFP_CFG_IN(GPIO81, AF1)
+#define GPIO82_SSP2_FRM_OUT 	MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW)
+#define GPIO82_SSP2_FRM_IN  	MFP_CFG_IN(GPIO82, AF1)
+#define GPIO83_SSP2_TXD      	MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW)
+#define GPIO83_SSP2_RXD      	MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_SSP2_TXD      	MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW)
+#define GPIO84_SSP2_RXD      	MFP_CFG_IN(GPIO84, AF2)
+
+/* MMC */
+#define GPIO6_MMC_CLK		MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW)
+#define GPIO8_MMC_CS0		MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW)
+#define GPIO9_MMC_CS1		MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
+#define GPIO34_MMC_CS0		MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW)
+#define GPIO39_MMC_CS1		MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO53_MMC_CLK		MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_MMC_CLK		MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW)
+#define GPIO69_MMC_CLK		MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW)
+#define GPIO67_MMC_CS0		MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW)
+#define GPIO68_MMC_CS1		MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0	MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1	MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2	MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3	MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4	MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5	MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6	MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7	MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8	MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9	MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10	MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11	MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12	MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13	MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14	MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15	MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_ACBIAS	MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+
+#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
new file mode 100644
index 000000000000..122bdbd53182
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -0,0 +1,433 @@
+#ifndef __ASM_ARCH_MFP_PXA27X_H
+#define __ASM_ARCH_MFP_PXA27X_H
+
+/*
+ * NOTE:  for those special-function bidirectional GPIOs, as described
+ * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input
+ * alternative is preserved, the direction is actually selected by the
+ * specific controller, and this should work in most cases.
+ */
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa2xx.h>
+
+/* GPIO */
+#define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
+#define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF0)
+#define GPIO87_GPIO		MFP_CFG_IN(GPIO87, AF0)
+#define GPIO88_GPIO		MFP_CFG_IN(GPIO88, AF0)
+#define GPIO89_GPIO		MFP_CFG_IN(GPIO89, AF0)
+#define GPIO90_GPIO		MFP_CFG_IN(GPIO90, AF0)
+#define GPIO91_GPIO		MFP_CFG_IN(GPIO91, AF0)
+#define GPIO92_GPIO		MFP_CFG_IN(GPIO92, AF0)
+#define GPIO93_GPIO		MFP_CFG_IN(GPIO93, AF0)
+#define GPIO94_GPIO		MFP_CFG_IN(GPIO94, AF0)
+#define GPIO95_GPIO		MFP_CFG_IN(GPIO95, AF0)
+#define GPIO96_GPIO		MFP_CFG_IN(GPIO96, AF0)
+#define GPIO97_GPIO		MFP_CFG_IN(GPIO97, AF0)
+#define GPIO98_GPIO		MFP_CFG_IN(GPIO98, AF0)
+#define GPIO99_GPIO		MFP_CFG_IN(GPIO99, AF0)
+#define GPIO100_GPIO		MFP_CFG_IN(GPIO100, AF0)
+#define GPIO101_GPIO		MFP_CFG_IN(GPIO101, AF0)
+#define GPIO102_GPIO		MFP_CFG_IN(GPIO102, AF0)
+#define GPIO103_GPIO		MFP_CFG_IN(GPIO103, AF0)
+#define GPIO104_GPIO		MFP_CFG_IN(GPIO104, AF0)
+#define GPIO105_GPIO		MFP_CFG_IN(GPIO105, AF0)
+#define GPIO106_GPIO		MFP_CFG_IN(GPIO106, AF0)
+#define GPIO107_GPIO		MFP_CFG_IN(GPIO107, AF0)
+#define GPIO108_GPIO		MFP_CFG_IN(GPIO108, AF0)
+#define GPIO109_GPIO		MFP_CFG_IN(GPIO109, AF0)
+#define GPIO110_GPIO		MFP_CFG_IN(GPIO110, AF0)
+#define GPIO111_GPIO		MFP_CFG_IN(GPIO111, AF0)
+#define GPIO112_GPIO		MFP_CFG_IN(GPIO112, AF0)
+#define GPIO113_GPIO		MFP_CFG_IN(GPIO113, AF0)
+#define GPIO114_GPIO		MFP_CFG_IN(GPIO114, AF0)
+#define GPIO115_GPIO		MFP_CFG_IN(GPIO115, AF0)
+#define GPIO116_GPIO		MFP_CFG_IN(GPIO116, AF0)
+#define GPIO117_GPIO		MFP_CFG_IN(GPIO117, AF0)
+#define GPIO118_GPIO		MFP_CFG_IN(GPIO118, AF0)
+#define GPIO119_GPIO		MFP_CFG_IN(GPIO119, AF0)
+#define GPIO120_GPIO		MFP_CFG_IN(GPIO120, AF0)
+
+/* Crystal and Clock Signals */
+#define GPIO9_HZ_CLK		MFP_CFG_OUT(GPIO9,  AF1, DRIVE_LOW)
+#define GPIO10_HZ_CLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO11_48_MHz		MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW)
+#define GPIO12_48_MHz		MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW)
+#define GPIO13_CLK_EXT		MFP_CFG_IN(GPIO13, AF1)
+
+/* OS Timer Signals */
+#define GPIO11_EXT_SYNC_0	MFP_CFG_IN(GPIO11, AF1)
+#define GPIO12_EXT_SYNC_1	MFP_CFG_IN(GPIO12, AF1)
+#define GPIO9_CHOUT_0		MFP_CFG_OUT(GPIO9,  AF3, DRIVE_LOW)
+#define GPIO10_CHOUT_1		MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW)
+#define GPIO11_CHOUT_0		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO12_CHOUT_1		MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO20_nSDCS_2		MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH)
+#define GPIO21_nSDCS_3		MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH)
+#define GPIO15_nCS_1		MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2		MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3		MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4		MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5		MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO21_DVAL_0		MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH)
+#define GPIO116_DVAL_0		MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH)
+#define GPIO33_DVAL_1		MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH)
+#define GPIO96_DVAL_1		MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH)
+#define GPIO18_RDY		MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0		MFP_CFG_IN(GPIO20, AF1)
+#define GPIO115_DREQ_0		MFP_CFG_IN(GPIO115, AF1)
+#define GPIO80_DREQ_1		MFP_CFG_IN(GPIO80, AF1)
+#define GPIO97_DREQ_1		MFP_CFG_IN(GPIO97, AF2)
+#define GPIO85_DREQ_2		MFP_CFG_IN(GPIO85, AF2)
+#define GPIO100_DREQ_2		MFP_CFG_IN(GPIO100, AF2)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO20_MBREQ		MFP_CFG_IN(GPIO20, AF2)
+#define GPIO80_MBREQ		MFP_CFG_IN(GPIO80, AF2)
+#define GPIO96_MBREQ		MFP_CFG_IN(GPIO96, AF2)
+#define GPIO115_MBREQ		MFP_CFG_IN(GPIO115, AF3)
+#define GPIO21_MBGNT		MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW)
+#define GPIO33_MBGNT		MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW)
+#define GPIO97_MBGNT		MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW)
+#define GPIO116_MBGNT		MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW)
+
+/* PC CARD */
+#define GPIO15_nPCE_1		MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO85_nPCE_1		MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH)
+#define GPIO86_nPCE_1		MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH)
+#define GPIO102_nPCE_1		MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH)
+#define GPIO54_nPCE_2		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+#define GPIO78_nPCE_2		MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
+#define GPIO87_nPCE_2		MFP_CFG_IN(GPIO87, AF1)
+#define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE		MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE		MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
+#define GPIO79_PSKTSEL		MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
+#define GPIO104_PSKTSEL		MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
+
+/* I2C */
+#define GPIO117_I2C_SCL		MFP_CFG_IN(GPIO117, AF1)
+#define GPIO118_I2C_SDA		MFP_CFG_IN(GPIO118, AF1)
+
+/* FFUART */
+#define GPIO9_FFUART_CTS	MFP_CFG_IN(GPIO9, AF3)
+#define GPIO26_FFUART_CTS	MFP_CFG_IN(GPIO26, AF3)
+#define GPIO35_FFUART_CTS	MFP_CFG_IN(GPIO35, AF1)
+#define GPIO100_FFUART_CTS	MFP_CFG_IN(GPIO100, AF3)
+#define GPIO10_FFUART_DCD	MFP_CFG_IN(GPIO10, AF1)
+#define GPIO36_FFUART_DCD	MFP_CFG_IN(GPIO36, AF1)
+#define GPIO33_FFUART_DSR	MFP_CFG_IN(GPIO33, AF2)
+#define GPIO37_FFUART_DSR	MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI	MFP_CFG_IN(GPIO38, AF1)
+#define GPIO89_FFUART_RI	MFP_CFG_IN(GPIO89, AF3)
+#define GPIO19_FFUART_RXD	MFP_CFG_IN(GPIO19, AF3)
+#define GPIO33_FFUART_RXD	MFP_CFG_IN(GPIO33, AF1)
+#define GPIO34_FFUART_RXD	MFP_CFG_IN(GPIO34, AF1)
+#define GPIO41_FFUART_RXD	MFP_CFG_IN(GPIO41, AF1)
+#define GPIO53_FFUART_RXD	MFP_CFG_IN(GPIO53, AF1)
+#define GPIO85_FFUART_RXD	MFP_CFG_IN(GPIO85, AF1)
+#define GPIO96_FFUART_RXD	MFP_CFG_IN(GPIO96, AF3)
+#define GPIO102_FFUART_RXD	MFP_CFG_IN(GPIO102, AF3)
+#define GPIO16_FFUART_TXD	MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH)
+#define GPIO37_FFUART_TXD	MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH)
+#define GPIO39_FFUART_TXD	MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_TXD	MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO99_FFUART_TXD	MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH)
+#define GPIO27_FFUART_RTS	MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS	MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_RTS	MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH)
+#define GPIO98_FFUART_RTS	MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR	MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO82_FFUART_DTR	MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO44_BTUART_CTS	MFP_CFG_IN(GPIO44, AF1)
+#define GPIO42_BTUART_RXD	MFP_CFG_IN(GPIO42, AF1)
+#define GPIO45_BTUART_RTS	MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+#define GPIO43_BTUART_TXD	MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+
+/* STUART */
+#define GPIO46_STUART_RXD	MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD	MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO42_FICP_RXD		MFP_CFG_IN(GPIO42, AF2)
+#define GPIO46_FICP_RXD		MFP_CFG_IN(GPIO46, AF1)
+#define GPIO43_FICP_TXD		MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH)
+#define GPIO47_FICP_TXD		MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1/2/3 */
+#define GPIO11_PWM2_OUT		MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW)
+#define GPIO12_PWM3_OUT		MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW)
+#define GPIO16_PWM0_OUT		MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT		MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+#define GPIO38_PWM1_OUT		MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW)
+#define GPIO46_PWM2_OUT		MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW)
+#define GPIO47_PWM3_OUT		MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW)
+#define GPIO79_PWM2_OUT		MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW)
+#define GPIO80_PWM3_OUT		MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW)
+#define GPIO115_PWM1_OUT	MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO31_AC97_SYNC	MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO94_AC97_SYNC	MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW)
+#define GPIO30_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO93_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW)
+#define GPIO45_AC97_SYSCLK	MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW)
+#define GPIO89_AC97_SYSCLK	MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW)
+#define GPIO98_AC97_SYSCLK	MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW)
+#define GPIO95_AC97_nRESET	MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW)
+#define GPIO113_AC97_nRESET	MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW)
+#define GPIO28_AC97_BITCLK	MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO29, AF1)
+#define GPIO116_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO116, AF2)
+#define GPIO99_AC97_SDATA_IN_1	MFP_CFG_IN(GPIO99, AF2)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN	MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN	MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC		MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO113_I2S_SYSCLK	MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO29_SSP1_SCLK	MFP_CFG_IN(GPIO29, AF3)
+#define GPIO27_SSP1_SYSCLK	MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
+#define GPIO53_SSP1_SYSCLK	MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM	MFP_CFG_IN(GPIO24, AF2)
+#define GPIO28_SSP1_SFRM	MFP_CFG_IN(GPIO28, AF3)
+#define GPIO25_SSP1_TXD		MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO57_SSP1_TXD		MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW)
+#define GPIO26_SSP1_RXD		MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_SCLKEN	MFP_CFG_IN(GPIO27, AF2)
+
+/* SSP 2 */
+#define GPIO19_SSP2_SCLK	MFP_CFG_IN(GPIO19, AF1)
+#define GPIO22_SSP2_SCLK	MFP_CFG_IN(GPIO22, AF3)
+#define GPIO29_SSP2_SCLK	MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW)
+#define GPIO36_SSP2_SCLK	MFP_CFG_IN(GPIO36, AF2)
+#define GPIO50_SSP2_SCLK	MFP_CFG_IN(GPIO50, AF3)
+#define GPIO22_SSP2_SYSCLK	MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW)
+#define GPIO14_SSP2_SFRM	MFP_CFG_IN(GPIO14, AF2)
+#define GPIO37_SSP2_SFRM	MFP_CFG_IN(GPIO37, AF2)
+#define GPIO87_SSP2_SFRM	MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW)
+#define GPIO88_SSP2_SFRM	MFP_CFG_IN(GPIO88, AF3)
+#define GPIO13_SSP2_TXD		MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW)
+#define GPIO38_SSP2_TXD		MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW)
+#define GPIO87_SSP2_TXD		MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW)
+#define GPIO89_SSP2_TXD		MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW)
+#define GPIO11_SSP2_RXD		MFP_CFG_IN(GPIO11, AF2)
+#define GPIO29_SSP2_RXD		MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW)
+#define GPIO40_SSP2_RXD		MFP_CFG_IN(GPIO40, AF1)
+#define GPIO86_SSP2_RXD		MFP_CFG_IN(GPIO86, AF1)
+#define GPIO88_SSP2_RXD		MFP_CFG_IN(GPIO88, AF2)
+#define GPIO22_SSP2_EXTCLK	MFP_CFG_IN(GPIO22, AF1)
+#define GPIO27_SSP2_EXTCLK	MFP_CFG_IN(GPIO27, AF1)
+#define GPIO22_SSP2_SCLKEN	MFP_CFG_IN(GPIO22, AF2)
+#define GPIO23_SSP2_SCLKEN	MFP_CFG_IN(GPIO23, AF2)
+
+/* SSP 3 */
+#define GPIO34_SSP3_SCLK	MFP_CFG_IN(GPIO34, AF3)
+#define GPIO40_SSP3_SCLK	MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW)
+#define GPIO52_SSP3_SCLK	MFP_CFG_IN(GPIO52, AF2)
+#define GPIO84_SSP3_SCLK	MFP_CFG_IN(GPIO84, AF1)
+#define GPIO45_SSP3_SYSCLK	MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW)
+#define GPIO35_SSP3_SFRM	MFP_CFG_IN(GPIO35, AF3)
+#define GPIO39_SSP3_SFRM	MFP_CFG_IN(GPIO39, AF3)
+#define GPIO83_SSP3_SFRM	MFP_CFG_IN(GPIO83, AF1)
+#define GPIO35_SSP3_TXD		MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW)
+#define GPIO38_SSP3_TXD		MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW)
+#define GPIO81_SSP3_TXD		MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO41_SSP3_RXD		MFP_CFG_IN(GPIO41, AF3)
+#define GPIO82_SSP3_RXD		MFP_CFG_IN(GPIO82, AF1)
+#define GPIO89_SSP3_RXD		MFP_CFG_IN(GPIO89, AF1)
+
+/* MMC */
+#define GPIO32_MMC_CLK		MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW)
+#define GPIO92_MMC_DAT_0	MFP_CFG_IN(GPIO92, AF1)
+#define GPIO109_MMC_DAT_1	MFP_CFG_IN(GPIO109, AF1)
+#define GPIO110_MMC_DAT_2	MFP_CFG_IN(GPIO110, AF1)
+#define GPIO111_MMC_DAT_3	MFP_CFG_IN(GPIO111, AF1)
+#define GPIO112_MMC_CMD		MFP_CFG_IN(GPIO112, AF1)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0	MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1	MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2	MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3	MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4	MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5	MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6	MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7	MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8	MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9	MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10	MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11	MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12	MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13	MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14	MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15	MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO86_LCD_LDD_16	MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW)
+#define GPIO87_LCD_LDD_17	MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+#define GPIO14_LCD_VSYNC	MFP_CFG_IN(GPIO14, AF1)
+#define GPIO19_LCD_CS		MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW)
+
+/* Keypad */
+#define GPIO93_KP_DKIN_0	MFP_CFG_IN(GPIO93, AF1)
+#define GPIO94_KP_DKIN_1	MFP_CFG_IN(GPIO94, AF1)
+#define GPIO95_KP_DKIN_2	MFP_CFG_IN(GPIO95, AF1)
+#define GPIO96_KP_DKIN_3	MFP_CFG_IN(GPIO96, AF1)
+#define GPIO97_KP_DKIN_4	MFP_CFG_IN(GPIO97, AF1)
+#define GPIO98_KP_DKIN_5	MFP_CFG_IN(GPIO98, AF1)
+#define GPIO99_KP_DKIN_6	MFP_CFG_IN(GPIO99, AF1)
+#define GPIO13_KP_KDIN_7	MFP_CFG_IN(GPIO13, AF2)
+#define GPIO100_KP_MKIN_0	MFP_CFG_IN(GPIO100, AF1)
+#define GPIO101_KP_MKIN_1	MFP_CFG_IN(GPIO101, AF1)
+#define GPIO102_KP_MKIN_2	MFP_CFG_IN(GPIO102, AF1)
+#define GPIO34_KP_MKIN_3	MFP_CFG_IN(GPIO34, AF2)
+#define GPIO37_KP_MKIN_3	MFP_CFG_IN(GPIO37, AF3)
+#define GPIO97_KP_MKIN_3	MFP_CFG_IN(GPIO97, AF3)
+#define GPIO98_KP_MKIN_4	MFP_CFG_IN(GPIO98, AF3)
+#define GPIO38_KP_MKIN_4	MFP_CFG_IN(GPIO38, AF2)
+#define GPIO39_KP_MKIN_4	MFP_CFG_IN(GPIO39, AF1)
+#define GPIO16_KP_MKIN_5	MFP_CFG_IN(GPIO16, AF1)
+#define GPIO90_KP_MKIN_5	MFP_CFG_IN(GPIO90, AF1)
+#define GPIO99_KP_MKIN_5	MFP_CFG_IN(GPIO99, AF3)
+#define GPIO17_KP_MKIN_6	MFP_CFG_IN(GPIO17, AF1)
+#define GPIO91_KP_MKIN_6	MFP_CFG_IN(GPIO91, AF1)
+#define GPIO95_KP_MKIN_6	MFP_CFG_IN(GPIO95, AF3)
+#define GPIO13_KP_MKIN_7	MFP_CFG_IN(GPIO13, AF3)
+#define GPIO36_KP_MKIN_7	MFP_CFG_IN(GPIO36, AF3)
+#define GPIO103_KP_MKOUT_0	MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_1	MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_2	MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH)
+#define GPIO106_KP_MKOUT_3	MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH)
+#define GPIO107_KP_MKOUT_4	MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH)
+#define GPIO108_KP_MKOUT_5	MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH)
+#define GPIO35_KP_MKOUT_6	MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH)
+#define GPIO22_KP_MKOUT_7	MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH)
+#define GPIO40_KP_MKOUT_6	MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH)
+#define GPIO41_KP_MKOUT_7	MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH)
+#define GPIO96_KP_MKOUT_6	MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH)
+
+/* USB P3 */
+#define GPIO10_USB_P3_5		MFP_CFG_IN(GPIO10, AF3)
+#define GPIO11_USB_P3_1		MFP_CFG_IN(GPIO11, AF3)
+#define GPIO30_USB_P3_2		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
+#define GPIO31_USB_P3_6		MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
+#define GPIO56_USB_P3_4		MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
+#define GPIO86_USB_P3_5		MFP_CFG_IN(GPIO86, AF3)
+#define GPIO87_USB_P3_1		MFP_CFG_IN(GPIO87, AF3)
+#define GPIO90_USB_P3_5		MFP_CFG_IN(GPIO90, AF2)
+#define GPIO91_USB_P3_1		MFP_CFG_IN(GPIO91, AF2)
+#define GPIO113_USB_P3_3	MFP_CFG_IN(GPIO113, AF3)
+
+/* USB P2 */
+#define GPIO34_USB_P2_2		MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW)
+#define GPIO35_USB_P2_1		MFP_CFG_IN(GPIO35, AF2)
+#define GPIO36_USB_P2_4		MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW)
+#define GPIO37_USB_P2_8		MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW)
+#define GPIO38_USB_P2_3		MFP_CFG_IN(GPIO38, AF3)
+#define GPIO39_USB_P2_6		MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO40_USB_P2_5		MFP_CFG_IN(GPIO40, AF3)
+#define GPIO41_USB_P2_7		MFP_CFG_IN(GPIO41, AF2)
+#define GPIO53_USB_P2_3		MFP_CFG_IN(GPIO53, AF2)
+
+/* USB Host Port 1/2 */
+#define GPIO88_USBH1_PWR	MFP_CFG_IN(GPIO88, AF1)
+#define GPIO89_USBH1_PEN	MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW)
+#define GPIO119_USBH2_PWR	MFP_CFG_IN(GPIO119, AF1)
+#define GPIO120_USBH2_PEN	MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW)
+
+/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */
+#define GPIO115_CIF_DD_3	MFP_CFG_IN(GPIO115, AF2)
+#define GPIO116_CIF_DD_2	MFP_CFG_IN(GPIO116, AF1)
+#define GPIO12_CIF_DD_7		MFP_CFG_IN(GPIO12, AF2)
+#define GPIO17_CIF_DD_6		MFP_CFG_IN(GPIO17, AF2)
+#define GPIO23_CIF_MCLK		MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW)
+#define GPIO24_CIF_FV		MFP_CFG_IN(GPIO24, AF1)
+#define GPIO25_CIF_LV		MFP_CFG_IN(GPIO25, AF1)
+#define GPIO26_CIF_PCLK		MFP_CFG_IN(GPIO26, AF2)
+#define GPIO27_CIF_DD_0		MFP_CFG_IN(GPIO27, AF3)
+#define GPIO42_CIF_MCLK		MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW)
+#define GPIO43_CIF_FV		MFP_CFG_IN(GPIO43, AF3)
+#define GPIO44_CIF_LV		MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_CIF_PCLK		MFP_CFG_IN(GPIO45, AF3)
+#define GPIO47_CIF_DD_0		MFP_CFG_IN(GPIO47, AF1)
+#define GPIO48_CIF_DD_5		MFP_CFG_IN(GPIO48, AF1)
+#define GPIO50_CIF_DD_3		MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_CIF_DD_2		MFP_CFG_IN(GPIO51, AF1)
+#define GPIO52_CIF_DD_4		MFP_CFG_IN(GPIO52, AF1)
+#define GPIO53_CIF_MCLK		MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW)
+#define GPIO54_CIF_PCLK		MFP_CFG_IN(GPIO54, AF3)
+#define GPIO55_CIF_DD_1		MFP_CFG_IN(GPIO55, AF1)
+#define GPIO81_CIF_DD_0		MFP_CFG_IN(GPIO81, AF2)
+#define GPIO82_CIF_DD_5		MFP_CFG_IN(GPIO82, AF3)
+#define GPIO83_CIF_DD_4		MFP_CFG_IN(GPIO83, AF3)
+#define GPIO84_CIF_FV		MFP_CFG_IN(GPIO84, AF3)
+#define GPIO85_CIF_LV		MFP_CFG_IN(GPIO85, AF3)
+#define GPIO90_CIF_DD_4		MFP_CFG_IN(GPIO90, AF3)
+#define GPIO91_CIF_DD_5		MFP_CFG_IN(GPIO91, AF3)
+#define GPIO93_CIF_DD_6		MFP_CFG_IN(GPIO93, AF2)
+#define GPIO94_CIF_DD_5		MFP_CFG_IN(GPIO94, AF2)
+#define GPIO95_CIF_DD_4		MFP_CFG_IN(GPIO95, AF2)
+#define GPIO98_CIF_DD_0		MFP_CFG_IN(GPIO98, AF2)
+#define GPIO103_CIF_DD_3	MFP_CFG_IN(GPIO103, AF1)
+#define GPIO104_CIF_DD_2	MFP_CFG_IN(GPIO104, AF1)
+#define GPIO105_CIF_DD_1	MFP_CFG_IN(GPIO105, AF1)
+#define GPIO106_CIF_DD_9	MFP_CFG_IN(GPIO106, AF1)
+#define GPIO107_CIF_DD_8	MFP_CFG_IN(GPIO107, AF1)
+#define GPIO108_CIF_DD_7	MFP_CFG_IN(GPIO108, AF1)
+#define GPIO114_CIF_DD_1	MFP_CFG_IN(GPIO114, AF1)
+
+/* Universal Subscriber ID Interface */
+#define GPIO114_UVS0		MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW)
+#define GPIO115_nUVS1		MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW)
+#define GPIO116_nUVS2		MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW)
+#define GPIO14_UCLK		MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW)
+#define GPIO91_UCLK		MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW)
+#define GPIO19_nURST		MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW)
+#define GPIO90_nURST		MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW)
+#define GPIO116_UDET		MFP_CFG_IN(GPIO116, AF3)
+#define GPIO114_UEN		MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW)
+#define GPIO115_UEN		MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW)
+
+/* Mobile Scalable Link (MSL) Interface */
+#define GPIO81_BB_OB_DAT_0	MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW)
+#define GPIO48_BB_OB_DAT_1	MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW)
+#define GPIO50_BB_OB_DAT_2	MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW)
+#define GPIO51_BB_OB_DAT_3	MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW)
+#define GPIO52_BB_OB_CLK	MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW)
+#define GPIO53_BB_OB_STB	MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_BB_OB_WAIT	MFP_CFG_IN(GPIO54, AF2)
+#define GPIO82_BB_IB_DAT_0	MFP_CFG_IN(GPIO82, AF2)
+#define GPIO55_BB_IB_DAT_1	MFP_CFG_IN(GPIO55, AF2)
+#define GPIO56_BB_IB_DAT_2	MFP_CFG_IN(GPIO56, AF2)
+#define GPIO57_BB_IB_DAT_3	MFP_CFG_IN(GPIO57, AF2)
+#define GPIO83_BB_IB_CLK	MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_BB_IB_STB	MFP_CFG_IN(GPIO84, AF2)
+#define GPIO85_BB_IB_WAIT	MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW)
+
+/* Memory Stick Host Controller */
+#define GPIO92_MSBS		MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW)
+#define GPIO109_MSSDIO		MFP_CFG_IN(GPIO109, AF2)
+#define GPIO112_nMSINS		MFP_CFG_IN(GPIO112, AF2)
+#define GPIO32_MSSCLK		MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+extern int keypad_set_wake(unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
new file mode 100644
index 000000000000..3e9211591e20
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -0,0 +1,133 @@
+#ifndef __ASM_ARCH_MFP_PXA2XX_H
+#define __ASM_ARCH_MFP_PXA2XX_H
+
+#include <mach/mfp.h>
+
+/*
+ * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
+ *
+ *  MFP_PIN(x)
+ *  MFP_AFx
+ *  MFP_LPM_DRIVE_{LOW, HIGH}
+ *  MFP_LPM_EDGE_x
+ *
+ * other MFP_x bit definitions will be ignored
+ *
+ * and adds the below two bits specifically for pxa2xx:
+ *
+ * bit     23 - Input/Output (PXA2xx specific)
+ * bit     24 - Wakeup Enable(PXA2xx specific)
+ */
+
+#define MFP_DIR_IN		(0x0 << 23)
+#define MFP_DIR_OUT		(0x1 << 23)
+#define MFP_DIR_MASK		(0x1 << 23)
+#define MFP_DIR(x)		(((x) >> 23) & 0x1)
+
+#define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
+#define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
+#define WAKEUP_ON_EDGE_FALL	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
+#define WAKEUP_ON_EDGE_BOTH	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
+
+/* specifically for enabling wakeup on keypad GPIOs */
+#define WAKEUP_ON_LEVEL_HIGH	(MFP_LPM_CAN_WAKEUP)
+
+#define MFP_CFG_IN(pin, af)		\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN))
+
+/* NOTE:  pins configured as output _must_ provide a low power state,
+ * and this state should help to minimize the power dissipation.
+ */
+#define MFP_CFG_OUT(pin, af, state)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Common configurations for pxa25x and pxa27x
+ *
+ * Note: pins configured as GPIO are always initialized to input
+ * so not to cause any side effect
+ */
+#define GPIO0_GPIO	MFP_CFG_IN(GPIO0, AF0)
+#define GPIO1_GPIO	MFP_CFG_IN(GPIO1, AF0)
+#define GPIO9_GPIO	MFP_CFG_IN(GPIO9, AF0)
+#define GPIO10_GPIO	MFP_CFG_IN(GPIO10, AF0)
+#define GPIO11_GPIO	MFP_CFG_IN(GPIO11, AF0)
+#define GPIO12_GPIO	MFP_CFG_IN(GPIO12, AF0)
+#define GPIO13_GPIO	MFP_CFG_IN(GPIO13, AF0)
+#define GPIO14_GPIO	MFP_CFG_IN(GPIO14, AF0)
+#define GPIO15_GPIO	MFP_CFG_IN(GPIO15, AF0)
+#define GPIO16_GPIO	MFP_CFG_IN(GPIO16, AF0)
+#define GPIO17_GPIO	MFP_CFG_IN(GPIO17, AF0)
+#define GPIO18_GPIO	MFP_CFG_IN(GPIO18, AF0)
+#define GPIO19_GPIO	MFP_CFG_IN(GPIO19, AF0)
+#define GPIO20_GPIO	MFP_CFG_IN(GPIO20, AF0)
+#define GPIO21_GPIO	MFP_CFG_IN(GPIO21, AF0)
+#define GPIO22_GPIO	MFP_CFG_IN(GPIO22, AF0)
+#define GPIO23_GPIO	MFP_CFG_IN(GPIO23, AF0)
+#define GPIO24_GPIO	MFP_CFG_IN(GPIO24, AF0)
+#define GPIO25_GPIO	MFP_CFG_IN(GPIO25, AF0)
+#define GPIO26_GPIO	MFP_CFG_IN(GPIO26, AF0)
+#define GPIO27_GPIO	MFP_CFG_IN(GPIO27, AF0)
+#define GPIO28_GPIO	MFP_CFG_IN(GPIO28, AF0)
+#define GPIO29_GPIO	MFP_CFG_IN(GPIO29, AF0)
+#define GPIO30_GPIO	MFP_CFG_IN(GPIO30, AF0)
+#define GPIO31_GPIO	MFP_CFG_IN(GPIO31, AF0)
+#define GPIO32_GPIO	MFP_CFG_IN(GPIO32, AF0)
+#define GPIO33_GPIO	MFP_CFG_IN(GPIO33, AF0)
+#define GPIO34_GPIO	MFP_CFG_IN(GPIO34, AF0)
+#define GPIO35_GPIO	MFP_CFG_IN(GPIO35, AF0)
+#define GPIO36_GPIO	MFP_CFG_IN(GPIO36, AF0)
+#define GPIO37_GPIO	MFP_CFG_IN(GPIO37, AF0)
+#define GPIO38_GPIO	MFP_CFG_IN(GPIO38, AF0)
+#define GPIO39_GPIO	MFP_CFG_IN(GPIO39, AF0)
+#define GPIO40_GPIO	MFP_CFG_IN(GPIO40, AF0)
+#define GPIO41_GPIO	MFP_CFG_IN(GPIO41, AF0)
+#define GPIO42_GPIO	MFP_CFG_IN(GPIO42, AF0)
+#define GPIO43_GPIO	MFP_CFG_IN(GPIO43, AF0)
+#define GPIO44_GPIO	MFP_CFG_IN(GPIO44, AF0)
+#define GPIO45_GPIO	MFP_CFG_IN(GPIO45, AF0)
+#define GPIO46_GPIO	MFP_CFG_IN(GPIO46, AF0)
+#define GPIO47_GPIO	MFP_CFG_IN(GPIO47, AF0)
+#define GPIO48_GPIO	MFP_CFG_IN(GPIO48, AF0)
+#define GPIO49_GPIO	MFP_CFG_IN(GPIO49, AF0)
+#define GPIO50_GPIO	MFP_CFG_IN(GPIO50, AF0)
+#define GPIO51_GPIO	MFP_CFG_IN(GPIO51, AF0)
+#define GPIO52_GPIO	MFP_CFG_IN(GPIO52, AF0)
+#define GPIO53_GPIO	MFP_CFG_IN(GPIO53, AF0)
+#define GPIO54_GPIO	MFP_CFG_IN(GPIO54, AF0)
+#define GPIO55_GPIO	MFP_CFG_IN(GPIO55, AF0)
+#define GPIO56_GPIO	MFP_CFG_IN(GPIO56, AF0)
+#define GPIO57_GPIO	MFP_CFG_IN(GPIO57, AF0)
+#define GPIO58_GPIO	MFP_CFG_IN(GPIO58, AF0)
+#define GPIO59_GPIO	MFP_CFG_IN(GPIO59, AF0)
+#define GPIO60_GPIO	MFP_CFG_IN(GPIO60, AF0)
+#define GPIO61_GPIO	MFP_CFG_IN(GPIO61, AF0)
+#define GPIO62_GPIO	MFP_CFG_IN(GPIO62, AF0)
+#define GPIO63_GPIO	MFP_CFG_IN(GPIO63, AF0)
+#define GPIO64_GPIO	MFP_CFG_IN(GPIO64, AF0)
+#define GPIO65_GPIO	MFP_CFG_IN(GPIO65, AF0)
+#define GPIO66_GPIO	MFP_CFG_IN(GPIO66, AF0)
+#define GPIO67_GPIO	MFP_CFG_IN(GPIO67, AF0)
+#define GPIO68_GPIO	MFP_CFG_IN(GPIO68, AF0)
+#define GPIO69_GPIO	MFP_CFG_IN(GPIO69, AF0)
+#define GPIO70_GPIO	MFP_CFG_IN(GPIO70, AF0)
+#define GPIO71_GPIO	MFP_CFG_IN(GPIO71, AF0)
+#define GPIO72_GPIO	MFP_CFG_IN(GPIO72, AF0)
+#define GPIO73_GPIO	MFP_CFG_IN(GPIO73, AF0)
+#define GPIO74_GPIO	MFP_CFG_IN(GPIO74, AF0)
+#define GPIO75_GPIO	MFP_CFG_IN(GPIO75, AF0)
+#define GPIO76_GPIO	MFP_CFG_IN(GPIO76, AF0)
+#define GPIO77_GPIO	MFP_CFG_IN(GPIO77, AF0)
+#define GPIO78_GPIO	MFP_CFG_IN(GPIO78, AF0)
+#define GPIO79_GPIO	MFP_CFG_IN(GPIO79, AF0)
+#define GPIO80_GPIO	MFP_CFG_IN(GPIO80, AF0)
+#define GPIO81_GPIO	MFP_CFG_IN(GPIO81, AF0)
+#define GPIO82_GPIO	MFP_CFG_IN(GPIO82, AF0)
+#define GPIO83_GPIO	MFP_CFG_IN(GPIO83, AF0)
+#define GPIO84_GPIO	MFP_CFG_IN(GPIO84, AF0)
+
+extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
+extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm);
+extern int gpio_set_wake(unsigned int gpio, unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA2XX_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
new file mode 100644
index 000000000000..bc1fb33a6e70
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -0,0 +1,575 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+ *
+ * PXA300/PXA310 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA300_H
+#define __ASM_ARCH_MFP_PXA300_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF1)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF3)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF2)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF3)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF3)
+#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
+
+#ifdef CONFIG_CPU_PXA310
+#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
+#endif
+
+/* Chip Select */
+#define GPIO2_nCS3		MFP_CFG(GPIO2,  AF1)
+
+/* AC97 */
+#define GPIO23_AC97_nACRESET	MFP_CFG(GPIO23, AF1)
+#define GPIO24_AC97_SYSCLK	MFP_CFG(GPIO24, AF1)
+#define GPIO29_AC97_BITCLK	MFP_CFG(GPIO29, AF1)
+#define GPIO25_AC97_SDATA_IN_0	MFP_CFG(GPIO25, AF1)
+#define GPIO26_AC97_SDATA_IN_1	MFP_CFG(GPIO26, AF1)
+#define GPIO17_AC97_SDATA_IN_2	MFP_CFG(GPIO17, AF3)
+#define GPIO21_AC97_SDATA_IN_2	MFP_CFG(GPIO21, AF2)
+#define GPIO18_AC97_SDATA_IN_3	MFP_CFG(GPIO18, AF3)
+#define GPIO22_AC97_SDATA_IN_3	MFP_CFG(GPIO22, AF2)
+#define GPIO27_AC97_SDATA_OUT	MFP_CFG(GPIO27, AF1)
+#define GPIO28_AC97_SYNC	MFP_CFG(GPIO28, AF1)
+
+/* I2C */
+#define GPIO21_I2C_SCL		MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH)
+#define GPIO22_I2C_SDA		MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO39_CI_DD_0		MFP_CFG_DRV(GPIO39, AF1, DS04X)
+#define GPIO40_CI_DD_1		MFP_CFG_DRV(GPIO40, AF1, DS04X)
+#define GPIO41_CI_DD_2		MFP_CFG_DRV(GPIO41, AF1, DS04X)
+#define GPIO42_CI_DD_3		MFP_CFG_DRV(GPIO42, AF1, DS04X)
+#define GPIO43_CI_DD_4		MFP_CFG_DRV(GPIO43, AF1, DS04X)
+#define GPIO44_CI_DD_5		MFP_CFG_DRV(GPIO44, AF1, DS04X)
+#define GPIO45_CI_DD_6		MFP_CFG_DRV(GPIO45, AF1, DS04X)
+#define GPIO46_CI_DD_7		MFP_CFG_DRV(GPIO46, AF0, DS04X)
+#define GPIO47_CI_DD_8		MFP_CFG_DRV(GPIO47, AF1, DS04X)
+#define GPIO48_CI_DD_9		MFP_CFG_DRV(GPIO48, AF1, DS04X)
+#define GPIO52_CI_HSYNC		MFP_CFG_DRV(GPIO52, AF0, DS04X)
+#define GPIO51_CI_VSYNC		MFP_CFG_DRV(GPIO51, AF0, DS04X)
+#define GPIO49_CI_MCLK		MFP_CFG_DRV(GPIO49, AF0, DS04X)
+#define GPIO50_CI_PCLK		MFP_CFG_DRV(GPIO50, AF0, DS04X)
+
+/* KEYPAD */
+#define GPIO3_KP_DKIN_6		MFP_CFG_LPM(GPIO3,   AF2, FLOAT)
+#define GPIO4_KP_DKIN_7		MFP_CFG_LPM(GPIO4,   AF2, FLOAT)
+#define GPIO16_KP_DKIN_6	MFP_CFG_LPM(GPIO16,  AF6, FLOAT)
+#define GPIO83_KP_DKIN_2	MFP_CFG_LPM(GPIO83,  AF5, FLOAT)
+#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84,  AF5, FLOAT)
+#define GPIO85_KP_DKIN_0	MFP_CFG_LPM(GPIO85,  AF3, FLOAT)
+#define GPIO86_KP_DKIN_1	MFP_CFG_LPM(GPIO86,  AF3, FLOAT)
+#define GPIO87_KP_DKIN_2	MFP_CFG_LPM(GPIO87,  AF3, FLOAT)
+#define GPIO88_KP_DKIN_3	MFP_CFG_LPM(GPIO88,  AF3, FLOAT)
+#define GPIO89_KP_DKIN_3	MFP_CFG_LPM(GPIO89,  AF3, FLOAT)
+#define GPIO107_KP_DKIN_0	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_1	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_2	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_3	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_4	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_5	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+#define GPIO113_KP_DKIN_6	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_7	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_0	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_1	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_2	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_3	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_4	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_5	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF5, FLOAT)
+#define GPIO0_2_KP_DKIN_0	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+#define GPIO1_2_KP_DKIN_1	MFP_CFG_LPM(GPIO1_2, AF2, FLOAT)
+#define GPIO2_2_KP_DKIN_6	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_7	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_1	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+#define GPIO5_2_KP_DKIN_0	MFP_CFG_LPM(GPIO5_2, AF2, FLOAT)
+
+#define GPIO5_KP_MKIN_0		MFP_CFG_LPM(GPIO5,   AF2, FLOAT)
+#define GPIO6_KP_MKIN_1		MFP_CFG_LPM(GPIO6,   AF2, FLOAT)
+#define GPIO9_KP_MKIN_6		MFP_CFG_LPM(GPIO9,   AF3, FLOAT)
+#define GPIO10_KP_MKIN_7	MFP_CFG_LPM(GPIO10,  AF3, FLOAT)
+#define GPIO70_KP_MKIN_6	MFP_CFG_LPM(GPIO70,  AF3, FLOAT)
+#define GPIO71_KP_MKIN_7	MFP_CFG_LPM(GPIO71,  AF3, FLOAT)
+#define GPIO100_KP_MKIN_6	MFP_CFG_LPM(GPIO100, AF7, FLOAT)
+#define GPIO101_KP_MKIN_7	MFP_CFG_LPM(GPIO101, AF7, FLOAT)
+#define GPIO112_KP_MKIN_6	MFP_CFG_LPM(GPIO112, AF4, FLOAT)
+#define GPIO113_KP_MKIN_7	MFP_CFG_LPM(GPIO113, AF4, FLOAT)
+#define GPIO115_KP_MKIN_0	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_1	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_2	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_3	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_4	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_5	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+#define GPIO125_KP_MKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO2_2_KP_MKIN_6	MFP_CFG_LPM(GPIO2_2, AF1, FLOAT)
+#define GPIO3_2_KP_MKIN_7	MFP_CFG_LPM(GPIO3_2, AF1, FLOAT)
+
+#define GPIO7_KP_MKOUT_5	MFP_CFG_LPM(GPIO7,   AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11,  AF3, DRIVE_HIGH)
+#define GPIO12_KP_MKOUT_6	MFP_CFG_LPM(GPIO12,  AF3, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_7	MFP_CFG_LPM(GPIO13,  AF3, DRIVE_HIGH)
+#define GPIO19_KP_MKOUT_4	MFP_CFG_LPM(GPIO19,  AF3, DRIVE_HIGH)
+#define GPIO20_KP_MKOUT_5	MFP_CFG_LPM(GPIO20,  AF3, DRIVE_HIGH)
+#define GPIO38_KP_MKOUT_5	MFP_CFG_LPM(GPIO38,  AF5, DRIVE_HIGH)
+#define GPIO53_KP_MKOUT_6	MFP_CFG_LPM(GPIO53,  AF5, DRIVE_HIGH)
+#define GPIO78_KP_MKOUT_7	MFP_CFG_LPM(GPIO78,  AF5, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_0	MFP_CFG_LPM(GPIO85,  AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_1	MFP_CFG_LPM(GPIO86,  AF2, DRIVE_HIGH)
+#define GPIO87_KP_MKOUT_2	MFP_CFG_LPM(GPIO87,  AF2, DRIVE_HIGH)
+#define GPIO88_KP_MKOUT_3	MFP_CFG_LPM(GPIO88,  AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_6	MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_7	MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH)
+#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_7	MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_6	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+#define GPIO4_2_KP_MKOUT_5	MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH)
+#define GPIO6_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO54_LCD_LDD_0	MFP_CFG_DRV(GPIO54, AF1, DS01X)
+#define GPIO55_LCD_LDD_1	MFP_CFG_DRV(GPIO55, AF1, DS01X)
+#define GPIO56_LCD_LDD_2	MFP_CFG_DRV(GPIO56, AF1, DS01X)
+#define GPIO57_LCD_LDD_3	MFP_CFG_DRV(GPIO57, AF1, DS01X)
+#define GPIO58_LCD_LDD_4	MFP_CFG_DRV(GPIO58, AF1, DS01X)
+#define GPIO59_LCD_LDD_5	MFP_CFG_DRV(GPIO59, AF1, DS01X)
+#define GPIO60_LCD_LDD_6	MFP_CFG_DRV(GPIO60, AF1, DS01X)
+#define GPIO61_LCD_LDD_7	MFP_CFG_DRV(GPIO61, AF1, DS01X)
+#define GPIO62_LCD_LDD_8	MFP_CFG_DRV(GPIO62, AF1, DS01X)
+#define GPIO63_LCD_LDD_9	MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_10	MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_11	MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_12	MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_13	MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_14	MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_15	MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_16	MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_17	MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO62_LCD_CS_N		MFP_CFG_DRV(GPIO62, AF2, DS01X)
+#define GPIO72_LCD_FCLK		MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_LCLK		MFP_CFG_DRV(GPIO73, AF1, DS01X)
+#define GPIO74_LCD_PCLK		MFP_CFG_DRV(GPIO74, AF1, DS02X)
+#define GPIO75_LCD_BIAS		MFP_CFG_DRV(GPIO75, AF1, DS01X)
+#define GPIO76_LCD_VSYNC	MFP_CFG_DRV(GPIO76, AF2, DS01X)
+
+#define GPIO15_LCD_CS_N		MFP_CFG_DRV(GPIO15,  AF2, DS01X)
+#define GPIO127_LCD_CS_N	MFP_CFG_DRV(GPIO127, AF1, DS01X)
+#define GPIO63_LCD_VSYNC	MFP_CFG_DRV(GPIO63,  AF2, DS01X)
+
+/* Mini-LCD */
+#define GPIO72_MLCD_FCLK	MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_LCLK	MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO54_MLCD_LDD_0	MFP_CFG_DRV(GPIO54, AF7, DS08X)
+#define GPIO55_MLCD_LDD_1	MFP_CFG_DRV(GPIO55, AF7, DS08X)
+#define GPIO56_MLCD_LDD_2	MFP_CFG_DRV(GPIO56, AF7, DS08X)
+#define GPIO57_MLCD_LDD_3	MFP_CFG_DRV(GPIO57, AF7, DS08X)
+#define GPIO58_MLCD_LDD_4	MFP_CFG_DRV(GPIO58, AF7, DS08X)
+#define GPIO59_MLCD_LDD_5	MFP_CFG_DRV(GPIO59, AF7, DS08X)
+#define GPIO60_MLCD_LDD_6	MFP_CFG_DRV(GPIO60, AF7, DS08X)
+#define GPIO61_MLCD_LDD_7	MFP_CFG_DRV(GPIO61, AF7, DS08X)
+#define GPIO62_MLCD_LDD_8	MFP_CFG_DRV(GPIO62, AF7, DS08X)
+#define GPIO63_MLCD_LDD_9	MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_LDD_10	MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_LDD_11	MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_LDD_12	MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_LDD_13	MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_LDD_14	MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_LDD_15	MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO74_MLCD_PCLK	MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO75_MLCD_BIAS	MFP_CFG_DRV(GPIO75, AF2, DS08X)
+
+/* MMC1 */
+#define GPIO7_MMC1_CLK		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_CMD		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
+#define GPIO14_MMC1_CMD		MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH)
+#define GPIO15_MMC1_CMD		MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH)
+#define GPIO3_MMC1_DAT0		MFP_CFG_LPM(GPIO3,  AF4, DRIVE_HIGH)
+#define GPIO4_MMC1_DAT1		MFP_CFG_LPM(GPIO4,  AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT2		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT3		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
+
+/* MMC2 */
+#define GPIO9_MMC2_DAT0		MFP_CFG_LPM(GPIO9,  AF4, PULL_HIGH)
+#define GPIO10_MMC2_DAT1	MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH)
+#define GPIO11_MMC2_DAT2	MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH)
+#define GPIO12_MMC2_DAT3	MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH)
+#define GPIO13_MMC2_CLK		MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH)
+#define GPIO14_MMC2_CMD		MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT0	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT1	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+#define GPIO79_MMC2_DAT2	MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_DAT3	MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+#define GPIO81_MMC2_CLK		MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH)
+#define GPIO82_MMC2_CMD		MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH)
+
+/* SSP1 */
+#define GPIO89_SSP1_EXTCLK	MFP_CFG(GPIO89, AF1)
+#define GPIO90_SSP1_SYSCLK	MFP_CFG(GPIO90, AF1)
+#define GPIO15_SSP1_SCLK	MFP_CFG(GPIO15, AF6)
+#define GPIO16_SSP1_FRM		MFP_CFG(GPIO16, AF2)
+#define GPIO33_SSP1_SCLK	MFP_CFG(GPIO33, AF5)
+#define GPIO34_SSP1_FRM		MFP_CFG(GPIO34, AF5)
+#define GPIO85_SSP1_SCLK	MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_FRM		MFP_CFG(GPIO86, AF1)
+#define GPIO18_SSP1_TXD		MFP_CFG(GPIO18, AF7)
+#define GPIO18_SSP1_RXD		MFP_CFG(GPIO18, AF2)
+#define GPIO20_SSP1_TXD		MFP_CFG(GPIO20, AF2)
+#define GPIO20_SSP1_RXD		MFP_CFG(GPIO20, AF7)
+#define GPIO35_SSP1_TXD		MFP_CFG(GPIO35, AF5)
+#define GPIO35_SSP1_RXD		MFP_CFG(GPIO35, AF4)
+#define GPIO36_SSP1_TXD		MFP_CFG(GPIO36, AF5)
+#define GPIO36_SSP1_RXD		MFP_CFG(GPIO36, AF6)
+#define GPIO87_SSP1_TXD		MFP_CFG(GPIO87, AF1)
+#define GPIO87_SSP1_RXD		MFP_CFG(GPIO87, AF6)
+#define GPIO88_SSP1_TXD		MFP_CFG(GPIO88, AF6)
+#define GPIO88_SSP1_RXD		MFP_CFG(GPIO88, AF1)
+
+/* SSP2 */
+#define GPIO29_SSP2_EXTCLK	MFP_CFG(GPIO29, AF2)
+#define GPIO23_SSP2_SCLK	MFP_CFG(GPIO23, AF2)
+#define GPIO17_SSP2_FRM		MFP_CFG(GPIO17, AF2)
+#define GPIO25_SSP2_SCLK	MFP_CFG(GPIO25, AF2)
+#define GPIO26_SSP2_FRM		MFP_CFG(GPIO26, AF2)
+#define GPIO33_SSP2_SCLK	MFP_CFG(GPIO33, AF6)
+#define GPIO34_SSP2_FRM		MFP_CFG(GPIO34, AF6)
+#define GPIO64_SSP2_SCLK	MFP_CFG(GPIO64, AF2)
+#define GPIO65_SSP2_FRM		MFP_CFG(GPIO65, AF2)
+#define GPIO19_SSP2_TXD		MFP_CFG(GPIO19, AF2)
+#define GPIO19_SSP2_RXD		MFP_CFG(GPIO19, AF7)
+#define GPIO24_SSP2_TXD		MFP_CFG(GPIO24, AF5)
+#define GPIO24_SSP2_RXD		MFP_CFG(GPIO24, AF4)
+#define GPIO27_SSP2_TXD		MFP_CFG(GPIO27, AF2)
+#define GPIO27_SSP2_RXD		MFP_CFG(GPIO27, AF5)
+#define GPIO28_SSP2_TXD		MFP_CFG(GPIO28, AF5)
+#define GPIO28_SSP2_RXD		MFP_CFG(GPIO28, AF2)
+#define GPIO35_SSP2_TXD		MFP_CFG(GPIO35, AF7)
+#define GPIO35_SSP2_RXD		MFP_CFG(GPIO35, AF6)
+#define GPIO66_SSP2_TXD		MFP_CFG(GPIO66, AF4)
+#define GPIO66_SSP2_RXD		MFP_CFG(GPIO66, AF2)
+#define GPIO67_SSP2_TXD		MFP_CFG(GPIO67, AF2)
+#define GPIO67_SSP2_RXD		MFP_CFG(GPIO67, AF4)
+#define GPIO36_SSP2_TXD		MFP_CFG(GPIO36, AF7)
+
+/* SSP3 */
+#define GPIO69_SSP3_FRM		MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW)
+#define GPIO68_SSP3_SCLK	MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT)
+#define GPIO92_SSP3_FRM		MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_SCLK	MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT)
+#define GPIO70_SSP3_TXD		MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO70_SSP3_RXD		MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT)
+#define GPIO93_SSP3_TXD		MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW)
+#define GPIO93_SSP3_RXD		MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT)
+#define GPIO94_SSP3_TXD		MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW)
+#define GPIO94_SSP3_RXD		MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
+
+/* SSP4 */
+#define GPIO95_SSP4_SCLK	MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_FRM		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO97_SSP4_TXD		MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH)
+#define GPIO97_SSP4_RXD		MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH)
+#define GPIO98_SSP4_TXD		MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH)
+#define GPIO98_SSP4_RXD		MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH)
+
+/* UART1 */
+#define GPIO32_UART1_CTS	MFP_CFG_LPM(GPIO32,  AF2, FLOAT)
+#define GPIO37_UART1_CTS	MFP_CFG_LPM(GPIO37,  AF4, FLOAT)
+#define GPIO79_UART1_CTS	MFP_CFG_LPM(GPIO79,  AF1, FLOAT)
+#define GPIO84_UART1_CTS	MFP_CFG_LPM(GPIO84,  AF3, FLOAT)
+#define GPIO101_UART1_CTS	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO106_UART1_CTS	MFP_CFG_LPM(GPIO106, AF6, FLOAT)
+
+#define GPIO32_UART1_RTS	MFP_CFG_LPM(GPIO32,  AF4, FLOAT)
+#define GPIO37_UART1_RTS	MFP_CFG_LPM(GPIO37,  AF2, FLOAT)
+#define GPIO79_UART1_RTS	MFP_CFG_LPM(GPIO79,  AF3, FLOAT)
+#define GPIO84_UART1_RTS	MFP_CFG_LPM(GPIO84,  AF1, FLOAT)
+#define GPIO101_UART1_RTS	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO106_UART1_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+
+#define GPIO34_UART1_DSR	MFP_CFG_LPM(GPIO34,  AF2, FLOAT)
+#define GPIO36_UART1_DSR	MFP_CFG_LPM(GPIO36,  AF4, FLOAT)
+#define GPIO81_UART1_DSR	MFP_CFG_LPM(GPIO81,  AF1, FLOAT)
+#define GPIO83_UART1_DSR	MFP_CFG_LPM(GPIO83,  AF3, FLOAT)
+#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO105_UART1_DSR	MFP_CFG_LPM(GPIO105, AF6, FLOAT)
+
+#define GPIO34_UART1_DTR	MFP_CFG_LPM(GPIO34,  AF4, FLOAT)
+#define GPIO36_UART1_DTR	MFP_CFG_LPM(GPIO36,  AF2, FLOAT)
+#define GPIO81_UART1_DTR	MFP_CFG_LPM(GPIO81,  AF3, FLOAT)
+#define GPIO83_UART1_DTR	MFP_CFG_LPM(GPIO83,  AF1, FLOAT)
+#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO105_UART1_DTR	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+
+#define GPIO35_UART1_RI		MFP_CFG_LPM(GPIO35,  AF2, FLOAT)
+#define GPIO82_UART1_RI		MFP_CFG_LPM(GPIO82,  AF1, FLOAT)
+#define GPIO104_UART1_RI	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+
+#define GPIO33_UART1_DCD	MFP_CFG_LPM(GPIO33,  AF2, FLOAT)
+#define GPIO80_UART1_DCD	MFP_CFG_LPM(GPIO80,  AF1, FLOAT)
+#define GPIO102_UART1_DCD	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+#define GPIO30_UART1_RXD	MFP_CFG_LPM(GPIO30,  AF2, FLOAT)
+#define GPIO31_UART1_RXD	MFP_CFG_LPM(GPIO31,  AF4, FLOAT)
+#define GPIO77_UART1_RXD	MFP_CFG_LPM(GPIO77,  AF1, FLOAT)
+#define GPIO78_UART1_RXD	MFP_CFG_LPM(GPIO78,  AF3, FLOAT)
+#define GPIO99_UART1_RXD	MFP_CFG_LPM(GPIO99,  AF1, FLOAT)
+#define GPIO100_UART1_RXD	MFP_CFG_LPM(GPIO100, AF6, FLOAT)
+#define GPIO102_UART1_RXD	MFP_CFG_LPM(GPIO102, AF6, FLOAT)
+#define GPIO104_UART1_RXD	MFP_CFG_LPM(GPIO104, AF4, FLOAT)
+
+#define GPIO30_UART1_TXD	MFP_CFG_LPM(GPIO30,  AF4, FLOAT)
+#define GPIO31_UART1_TXD	MFP_CFG_LPM(GPIO31,  AF2, FLOAT)
+#define GPIO77_UART1_TXD	MFP_CFG_LPM(GPIO77,  AF3, FLOAT)
+#define GPIO78_UART1_TXD	MFP_CFG_LPM(GPIO78,  AF1, FLOAT)
+#define GPIO99_UART1_TXD	MFP_CFG_LPM(GPIO99,  AF6, FLOAT)
+#define GPIO100_UART1_TXD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO102_UART1_TXD	MFP_CFG_LPM(GPIO102, AF4, FLOAT)
+
+/* UART2 */
+#define GPIO15_UART2_CTS	MFP_CFG_LPM(GPIO15,  AF3, FLOAT)
+#define GPIO16_UART2_CTS	MFP_CFG_LPM(GPIO16,  AF5, FLOAT)
+#define GPIO111_UART2_CTS	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO114_UART2_CTS	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+
+#define GPIO15_UART2_RTS	MFP_CFG_LPM(GPIO15,  AF4, FLOAT)
+#define GPIO16_UART2_RTS	MFP_CFG_LPM(GPIO16,  AF4, FLOAT)
+#define GPIO114_UART2_RTS	MFP_CFG_LPM(GPIO114, AF3, FLOAT)
+#define GPIO111_UART2_RTS	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+#define GPIO18_UART2_RXD	MFP_CFG_LPM(GPIO18,  AF5, FLOAT)
+#define GPIO19_UART2_RXD	MFP_CFG_LPM(GPIO19,  AF4, FLOAT)
+#define GPIO112_UART2_RXD	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO113_UART2_RXD	MFP_CFG_LPM(GPIO113, AF3, FLOAT)
+
+#define GPIO18_UART2_TXD	MFP_CFG_LPM(GPIO18,  AF4, FLOAT)
+#define GPIO19_UART2_TXD	MFP_CFG_LPM(GPIO19,  AF5, FLOAT)
+#define GPIO112_UART2_TXD	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO113_UART2_TXD	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO91_UART3_CTS	MFP_CFG_LPM(GPIO91,  AF2, FLOAT)
+#define GPIO92_UART3_CTS	MFP_CFG_LPM(GPIO92,  AF4, FLOAT)
+#define GPIO107_UART3_CTS	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_CTS	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+#define GPIO91_UART3_RTS	MFP_CFG_LPM(GPIO91,  AF4, FLOAT)
+#define GPIO92_UART3_RTS	MFP_CFG_LPM(GPIO92,  AF2, FLOAT)
+#define GPIO107_UART3_RTS	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO108_UART3_RTS	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+
+#define GPIO7_UART3_RXD		MFP_CFG_LPM(GPIO7,   AF2, FLOAT)
+#define GPIO8_UART3_RXD		MFP_CFG_LPM(GPIO8,   AF6, FLOAT)
+#define GPIO93_UART3_RXD	MFP_CFG_LPM(GPIO93,  AF4, FLOAT)
+#define GPIO94_UART3_RXD	MFP_CFG_LPM(GPIO94,  AF2, FLOAT)
+#define GPIO109_UART3_RXD	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO110_UART3_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+
+#define GPIO7_UART3_TXD		MFP_CFG_LPM(GPIO7,   AF6, FLOAT)
+#define GPIO8_UART3_TXD		MFP_CFG_LPM(GPIO8,   AF2, FLOAT)
+#define GPIO93_UART3_TXD	MFP_CFG_LPM(GPIO93,  AF2, FLOAT)
+#define GPIO94_UART3_TXD	MFP_CFG_LPM(GPIO94,  AF4, FLOAT)
+#define GPIO109_UART3_TXD	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO110_UART3_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+
+/* USB Host */
+#define GPIO0_2_USBH_PEN	MFP_CFG(GPIO0_2, AF1)
+#define GPIO1_2_USBH_PWR	MFP_CFG(GPIO1_2, AF1)
+
+/* USB P3 */
+#define GPIO77_USB_P3_1		MFP_CFG(GPIO77,  AF2)
+#define GPIO78_USB_P3_2		MFP_CFG(GPIO78,  AF2)
+#define GPIO79_USB_P3_3		MFP_CFG(GPIO79,  AF2)
+#define GPIO80_USB_P3_4		MFP_CFG(GPIO80,  AF2)
+#define GPIO81_USB_P3_5		MFP_CFG(GPIO81,  AF2)
+#define GPIO82_USB_P3_6		MFP_CFG(GPIO82,  AF2)
+
+/* PWM */
+#define GPIO17_PWM0_OUT		MFP_CFG(GPIO17, AF1)
+#define GPIO18_PWM1_OUT		MFP_CFG(GPIO18, AF1)
+#define GPIO19_PWM2_OUT		MFP_CFG(GPIO19, AF1)
+#define GPIO20_PWM3_OUT		MFP_CFG(GPIO20, AF1)
+
+/* CIR */
+#define GPIO8_CIR_OUT		MFP_CFG(GPIO8, AF5)
+#define GPIO16_CIR_OUT		MFP_CFG(GPIO16, AF3)
+
+#define GPIO20_OW_DQ_IN		MFP_CFG(GPIO20, AF5)
+#define GPIO126_OW_DQ		MFP_CFG(GPIO126, AF2)
+
+#define GPIO0_DF_RDY		MFP_CFG(GPIO0, AF1)
+#define GPIO7_CLK_BYPASS_XSC	MFP_CFG(GPIO7, AF7)
+#define GPIO17_EXT_SYNC_MVT_0	MFP_CFG(GPIO17, AF6)
+#define GPIO18_EXT_SYNC_MVT_1	MFP_CFG(GPIO18, AF6)
+#define GPIO19_OST_CHOUT_MVT_0	MFP_CFG(GPIO19, AF6)
+#define GPIO20_OST_CHOUT_MVT_1	MFP_CFG(GPIO20, AF6)
+#define GPIO49_48M_CLK		MFP_CFG(GPIO49, AF2)
+#define GPIO126_EXT_CLK		MFP_CFG(GPIO126, AF3)
+#define GPIO127_CLK_BYPASS_GB	MFP_CFG(GPIO127, AF7)
+#define GPIO71_EXT_MATCH_MVT	MFP_CFG(GPIO71, AF6)
+
+#define GPIO3_uIO_IN		MFP_CFG(GPIO3, AF1)
+
+#define GPIO4_uSIM_CARD_STATE	MFP_CFG(GPIO4, AF1)
+#define GPIO5_uSIM_uCLK		MFP_CFG(GPIO5, AF1)
+#define GPIO6_uSIM_uRST		MFP_CFG(GPIO6, AF1)
+#define GPIO16_uSIM_UVS_0	MFP_CFG(GPIO16, AF1)
+
+#define GPIO9_SCIO		MFP_CFG(GPIO9, AF1)
+#define GPIO20_RTC_MVT		MFP_CFG(GPIO20, AF4)
+#define GPIO126_RTC_MVT		MFP_CFG(GPIO126, AF1)
+
+/*
+ * PXA300 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA300
+#define GPIO99_USB_P2_2		MFP_CFG(GPIO99, AF2)
+#define GPIO99_USB_P2_5		MFP_CFG(GPIO99, AF3)
+#define GPIO99_USB_P2_6		MFP_CFG(GPIO99, AF4)
+#define GPIO100_USB_P2_2	MFP_CFG(GPIO100, AF4)
+#define GPIO100_USB_P2_5	MFP_CFG(GPIO100, AF5)
+#define GPIO101_USB_P2_1	MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_4	MFP_CFG(GPIO102, AF2)
+#define GPIO104_USB_P2_3	MFP_CFG(GPIO104, AF2)
+#define GPIO105_USB_P2_5	MFP_CFG(GPIO105, AF2)
+#define GPIO100_USB_P2_6	MFP_CFG(GPIO100, AF2)
+#define GPIO106_USB_P2_7	MFP_CFG(GPIO106, AF2)
+#define GPIO103_USB_P2_8	MFP_CFG(GPIO103, AF2)
+
+/* U2D UTMI */
+#define GPIO38_UTM_CLK		MFP_CFG(GPIO38,  AF1)
+#define GPIO26_U2D_RXERROR	MFP_CFG(GPIO26,  AF3)
+#define GPIO50_U2D_RXERROR	MFP_CFG(GPIO50,  AF1)
+#define GPIO89_U2D_RXERROR	MFP_CFG(GPIO89,  AF5)
+#define GPIO24_UTM_RXVALID	MFP_CFG(GPIO24,  AF3)
+#define GPIO48_UTM_RXVALID	MFP_CFG(GPIO48,  AF2)
+#define GPIO87_UTM_RXVALID	MFP_CFG(GPIO87,  AF5)
+#define GPIO25_UTM_RXACTIVE	MFP_CFG(GPIO25,  AF3)
+#define GPIO47_UTM_RXACTIVE	MFP_CFG(GPIO47,  AF2)
+#define GPIO49_UTM_RXACTIVE	MFP_CFG(GPIO49,  AF1)
+#define GPIO88_UTM_RXACTIVE	MFP_CFG(GPIO88,  AF5)
+#define GPIO53_UTM_TXREADY	MFP_CFG(GPIO53,  AF1)
+#define GPIO67_UTM_LINESTATE_0	MFP_CFG(GPIO67,  AF3)
+#define GPIO92_UTM_LINESTATE_0	MFP_CFG(GPIO92,  AF3)
+#define GPIO104_UTM_LINESTATE_0	MFP_CFG(GPIO104, AF3)
+#define GPIO109_UTM_LINESTATE_0	MFP_CFG(GPIO109, AF4)
+#define GPIO68_UTM_LINESTATE_1	MFP_CFG(GPIO68,  AF3)
+#define GPIO93_UTM_LINESTATE_1	MFP_CFG(GPIO93,  AF3)
+#define GPIO105_UTM_LINESTATE_1	MFP_CFG(GPIO105, AF3)
+#define GPIO27_U2D_OPMODE_0	MFP_CFG(GPIO27,  AF4)
+#define GPIO51_U2D_OPMODE_0	MFP_CFG(GPIO51,  AF2)
+#define GPIO90_U2D_OPMODE_0	MFP_CFG(GPIO90,  AF7)
+#define GPIO28_U2D_OPMODE_1	MFP_CFG(GPIO28,  AF4)
+#define GPIO52_U2D_OPMODE_1	MFP_CFG(GPIO52,  AF2)
+#define GPIO106_U2D_OPMODE_1	MFP_CFG(GPIO106, AF3)
+#define GPIO110_U2D_OPMODE_1	MFP_CFG(GPIO110, AF5)
+#define GPIO76_U2D_RESET	MFP_CFG(GPIO76,  AF1)
+#define GPIO95_U2D_RESET	MFP_CFG(GPIO95,  AF2)
+#define GPIO100_U2D_RESET	MFP_CFG(GPIO100, AF3)
+#define GPIO66_U2D_SUSPEND	MFP_CFG(GPIO66,  AF3)
+#define GPIO98_U2D_SUSPEND	MFP_CFG(GPIO98,  AF2)
+#define GPIO103_U2D_SUSPEND	MFP_CFG(GPIO103, AF3)
+#define GPIO65_U2D_TERM_SEL	MFP_CFG(GPIO65,  AF5)
+#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97,  AF3)
+#define GPIO102_U2D_TERM_SEL	MFP_CFG(GPIO102, AF5)
+#define GPIO29_U2D_TXVALID	MFP_CFG(GPIO29,  AF3)
+#define GPIO52_U2D_TXVALID	MFP_CFG(GPIO52,  AF4)
+#define GPIO69_U2D_TXVALID	MFP_CFG(GPIO69,  AF3)
+#define GPIO85_U2D_TXVALID	MFP_CFG(GPIO85,  AF7)
+#define GPIO64_U2D_XCVR_SEL	MFP_CFG(GPIO64,  AF5)
+#define GPIO96_U2D_XCVR_SEL	MFP_CFG(GPIO96,  AF3)
+#define GPIO101_U2D_XCVR_SEL	MFP_CFG(GPIO101, AF5)
+#define GPIO30_UTM_PHYDATA_0	MFP_CFG(GPIO30,  AF3)
+#define GPIO31_UTM_PHYDATA_1	MFP_CFG(GPIO31,  AF3)
+#define GPIO32_UTM_PHYDATA_2	MFP_CFG(GPIO32,  AF3)
+#define GPIO33_UTM_PHYDATA_3	MFP_CFG(GPIO33,  AF3)
+#define GPIO34_UTM_PHYDATA_4	MFP_CFG(GPIO34,  AF3)
+#define GPIO35_UTM_PHYDATA_5	MFP_CFG(GPIO35,  AF3)
+#define GPIO36_UTM_PHYDATA_6	MFP_CFG(GPIO36,  AF3)
+#define GPIO37_UTM_PHYDATA_7	MFP_CFG(GPIO37,  AF3)
+#define GPIO39_UTM_PHYDATA_0	MFP_CFG(GPIO39,  AF3)
+#define GPIO40_UTM_PHYDATA_1	MFP_CFG(GPIO40,  AF3)
+#define GPIO41_UTM_PHYDATA_2	MFP_CFG(GPIO41,  AF3)
+#define GPIO42_UTM_PHYDATA_3	MFP_CFG(GPIO42,  AF3)
+#define GPIO43_UTM_PHYDATA_4	MFP_CFG(GPIO43,  AF3)
+#define GPIO44_UTM_PHYDATA_5	MFP_CFG(GPIO44,  AF3)
+#define GPIO45_UTM_PHYDATA_6	MFP_CFG(GPIO45,  AF3)
+#define GPIO46_UTM_PHYDATA_7	MFP_CFG(GPIO46,  AF3)
+#endif /* CONFIG_CPU_PXA300 */
+
+/*
+ * PXA310 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA310
+/* USB P2 */
+#define GPIO36_USB_P2_1		MFP_CFG(GPIO36, AF1)
+#define GPIO30_USB_P2_2		MFP_CFG(GPIO30, AF1)
+#define GPIO35_USB_P2_3		MFP_CFG(GPIO35, AF1)
+#define GPIO32_USB_P2_4		MFP_CFG(GPIO32, AF1)
+#define GPIO34_USB_P2_5		MFP_CFG(GPIO34, AF1)
+#define GPIO31_USB_P2_6		MFP_CFG(GPIO31, AF1)
+
+/* MMC1 */
+#define GPIO24_MMC1_CMD		MFP_CFG(GPIO24, AF3)
+#define GPIO29_MMC1_DAT0	MFP_CFG(GPIO29, AF3)
+
+/* MMC3 */
+#define GPIO103_MMC3_CLK	MFP_CFG(GPIO103, AF2)
+#define GPIO105_MMC3_CMD	MFP_CFG(GPIO105, AF2)
+#define GPIO11_2_MMC3_CLK	MFP_CFG(GPIO11_2, AF1)
+#define GPIO12_2_MMC3_CMD	MFP_CFG(GPIO12_2, AF1)
+#define GPIO7_2_MMC3_DAT0	MFP_CFG(GPIO7_2, AF1)
+#define GPIO8_2_MMC3_DAT1	MFP_CFG(GPIO8_2, AF1)
+#define GPIO9_2_MMC3_DAT2	MFP_CFG(GPIO9_2, AF1)
+#define GPIO10_2_MMC3_DAT3	MFP_CFG(GPIO10_2, AF1)
+
+/* ULPI */
+#define GPIO38_ULPI_CLK		MFP_CFG(GPIO38, AF1)
+#define GPIO30_ULPI_DATA_OUT_0	MFP_CFG(GPIO30, AF3)
+#define GPIO31_ULPI_DATA_OUT_1	MFP_CFG(GPIO31, AF3)
+#define GPIO32_ULPI_DATA_OUT_2	MFP_CFG(GPIO32, AF3)
+#define GPIO33_ULPI_DATA_OUT_3	MFP_CFG(GPIO33, AF3)
+#define GPIO34_ULPI_DATA_OUT_4	MFP_CFG(GPIO34, AF3)
+#define GPIO35_ULPI_DATA_OUT_5	MFP_CFG(GPIO35, AF3)
+#define GPIO36_ULPI_DATA_OUT_6	MFP_CFG(GPIO36, AF3)
+#define GPIO37_ULPI_DATA_OUT_7	MFP_CFG(GPIO37, AF3)
+#define GPIO33_ULPI_OTG_INTR	MFP_CFG(GPIO33, AF1)
+
+#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
+#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
+#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
+#endif /* CONFIG_CPU_PXA310 */
+
+#endif /* __ASM_ARCH_MFP_PXA300_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
new file mode 100644
index 000000000000..74990510cf34
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -0,0 +1,447 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+ *
+ * PXA320 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA320_H
+#define __ASM_ARCH_MFP_PXA320_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
+
+#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
+#define GPIO13_2_GPIO		MFP_CFG(GPIO13_2, AF0)
+#define GPIO14_2_GPIO		MFP_CFG(GPIO14_2, AF0)
+#define GPIO15_2_GPIO		MFP_CFG(GPIO15_2, AF0)
+#define GPIO16_2_GPIO		MFP_CFG(GPIO16_2, AF0)
+#define GPIO17_2_GPIO		MFP_CFG(GPIO17_2, AF0)
+
+/* Chip Select */
+#define GPIO4_nCS3		MFP_CFG(GPIO4, AF1)
+
+/* AC97 */
+#define GPIO34_AC97_SYSCLK	MFP_CFG(GPIO34, AF1)
+#define GPIO39_AC97_BITCLK	MFP_CFG(GPIO39, AF1)
+#define GPIO40_AC97_nACRESET	MFP_CFG(GPIO40, AF1)
+#define GPIO35_AC97_SDATA_IN_0	MFP_CFG(GPIO35, AF1)
+#define GPIO36_AC97_SDATA_IN_1	MFP_CFG(GPIO36, AF1)
+#define GPIO32_AC97_SDATA_IN_2	MFP_CFG(GPIO32, AF2)
+#define GPIO33_AC97_SDATA_IN_3	MFP_CFG(GPIO33, AF2)
+#define GPIO11_AC97_SDATA_IN_2	MFP_CFG(GPIO11, AF3)
+#define GPIO12_AC97_SDATA_IN_3	MFP_CFG(GPIO12, AF3)
+#define GPIO37_AC97_SDATA_OUT	MFP_CFG(GPIO37, AF1)
+#define GPIO38_AC97_SYNC	MFP_CFG(GPIO38, AF1)
+
+/* I2C */
+#define GPIO32_I2C_SCL		MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH)
+#define GPIO33_I2C_SDA		MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO49_CI_DD_0		MFP_CFG_DRV(GPIO49, AF1, DS04X)
+#define GPIO50_CI_DD_1		MFP_CFG_DRV(GPIO50, AF1, DS04X)
+#define GPIO51_CI_DD_2		MFP_CFG_DRV(GPIO51, AF1, DS04X)
+#define GPIO52_CI_DD_3		MFP_CFG_DRV(GPIO52, AF1, DS04X)
+#define GPIO53_CI_DD_4		MFP_CFG_DRV(GPIO53, AF1, DS04X)
+#define GPIO54_CI_DD_5		MFP_CFG_DRV(GPIO54, AF1, DS04X)
+#define GPIO55_CI_DD_6		MFP_CFG_DRV(GPIO55, AF1, DS04X)
+#define GPIO56_CI_DD_7		MFP_CFG_DRV(GPIO56, AF0, DS04X)
+#define GPIO57_CI_DD_8		MFP_CFG_DRV(GPIO57, AF1, DS04X)
+#define GPIO58_CI_DD_9		MFP_CFG_DRV(GPIO58, AF1, DS04X)
+#define GPIO59_CI_MCLK		MFP_CFG_DRV(GPIO59, AF0, DS04X)
+#define GPIO60_CI_PCLK		MFP_CFG_DRV(GPIO60, AF0, DS04X)
+#define GPIO61_CI_HSYNC		MFP_CFG_DRV(GPIO61, AF0, DS04X)
+#define GPIO62_CI_VSYNC		MFP_CFG_DRV(GPIO62, AF0, DS04X)
+
+#define GPIO31_CIR_OUT		MFP_CFG(GPIO31, AF5)
+
+#define GPIO0_2_CLK_EXT		MFP_CFG(GPIO0_2, AF3)
+#define GPIO0_DRQ		MFP_CFG(GPIO0, AF2)
+#define GPIO11_EXT_SYNC0	MFP_CFG(GPIO11, AF5)
+#define GPIO12_EXT_SYNC1	MFP_CFG(GPIO12, AF6)
+#define GPIO0_2_HZ_CLK		MFP_CFG(GPIO0_2, AF1)
+#define GPIO14_HZ_CLK		MFP_CFG(GPIO14, AF4)
+#define GPIO30_ICP_RXD		MFP_CFG(GPIO30, AF1)
+#define GPIO31_ICP_TXD		MFP_CFG(GPIO31, AF1)
+
+#define GPIO83_KP_DKIN_0	MFP_CFG_LPM(GPIO83, AF3, FLOAT)
+#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84, AF3, FLOAT)
+#define GPIO85_KP_DKIN_2	MFP_CFG_LPM(GPIO85, AF3, FLOAT)
+#define GPIO86_KP_DKIN_3	MFP_CFG_LPM(GPIO86, AF3, FLOAT)
+
+#define GPIO105_KP_DKIN_0	MFP_CFG_LPM(GPIO105, AF2, FLOAT)
+#define GPIO106_KP_DKIN_1	MFP_CFG_LPM(GPIO106, AF2, FLOAT)
+#define GPIO107_KP_DKIN_2	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_3	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_4	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_5	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_6	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_7	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+
+#define GPIO113_KP_DKIN_0	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_1	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_2	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_3	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_4	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_5	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_6	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_7	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+
+#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF2, FLOAT)
+#define GPIO126_KP_DKIN_1	MFP_CFG_LPM(GPIO126, AF2, FLOAT)
+
+#define GPIO2_2_KP_DKIN_0	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_1	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO125_KP_DKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_7	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+
+#define GPIO113_KP_MKIN_0	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+#define GPIO114_KP_MKIN_1	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+#define GPIO115_KP_MKIN_2	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_3	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_4	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_5	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_6	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_7	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+
+#define GPIO83_KP_MKOUT_0	MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO84_KP_MKOUT_1	MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_2	MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_3	MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_4	MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
+#define GPIO14_KP_MKOUT_5	MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH)
+
+#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_5	MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH)
+#define GPIO127_KP_MKOUT_6	MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO6_2_LCD_LDD_0	MFP_CFG_DRV(GPIO6_2, AF1, DS01X)
+#define GPIO7_2_LCD_LDD_1	MFP_CFG_DRV(GPIO7_2, AF1, DS01X)
+#define GPIO8_2_LCD_LDD_2	MFP_CFG_DRV(GPIO8_2, AF1, DS01X)
+#define GPIO9_2_LCD_LDD_3	MFP_CFG_DRV(GPIO9_2, AF1, DS01X)
+#define GPIO10_2_LCD_LDD_4	MFP_CFG_DRV(GPIO10_2, AF1, DS01X)
+#define GPIO11_2_LCD_LDD_5	MFP_CFG_DRV(GPIO11_2, AF1, DS01X)
+#define GPIO12_2_LCD_LDD_6	MFP_CFG_DRV(GPIO12_2, AF1, DS01X)
+#define GPIO13_2_LCD_LDD_7	MFP_CFG_DRV(GPIO13_2, AF1, DS01X)
+#define GPIO63_LCD_LDD_8	MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_9	MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_10	MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_11	MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_12	MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_13	MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_14	MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_15	MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_16	MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO72_LCD_LDD_17	MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_CS_N		MFP_CFG_DRV(GPIO73, AF2, DS01X)
+#define GPIO74_LCD_VSYNC	MFP_CFG_DRV(GPIO74, AF2, DS01X)
+#define GPIO14_2_LCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF1, DS01X)
+#define GPIO15_2_LCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF1, DS01X)
+#define GPIO16_2_LCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF1, DS01X)
+#define GPIO17_2_LCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF1, DS01X)
+#define GPIO64_LCD_VSYNC	MFP_CFG_DRV(GPIO64, AF2, DS01X)
+#define GPIO63_LCD_CS_N		MFP_CFG_DRV(GPIO63, AF2, DS01X)
+
+#define GPIO6_2_MLCD_DD_0	MFP_CFG_DRV(GPIO6_2, AF7, DS08X)
+#define GPIO7_2_MLCD_DD_1	MFP_CFG_DRV(GPIO7_2, AF7, DS08X)
+#define GPIO8_2_MLCD_DD_2	MFP_CFG_DRV(GPIO8_2, AF7, DS08X)
+#define GPIO9_2_MLCD_DD_3	MFP_CFG_DRV(GPIO9_2, AF7, DS08X)
+#define GPIO10_2_MLCD_DD_4	MFP_CFG_DRV(GPIO10_2, AF7, DS08X)
+#define GPIO11_2_MLCD_DD_5	MFP_CFG_DRV(GPIO11_2, AF7, DS08X)
+#define GPIO12_2_MLCD_DD_6	MFP_CFG_DRV(GPIO12_2, AF7, DS08X)
+#define GPIO13_2_MLCD_DD_7	MFP_CFG_DRV(GPIO13_2, AF7, DS08X)
+#define GPIO63_MLCD_DD_8	MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_DD_9	MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_DD_10	MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_DD_11	MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_DD_12	MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_DD_13	MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_DD_14	MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO70_MLCD_DD_15	MFP_CFG_DRV(GPIO70, AF7, DS08X)
+#define GPIO71_MLCD_DD_16	MFP_CFG_DRV(GPIO71, AF7, DS08X)
+#define GPIO72_MLCD_DD_17	MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_CS		MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO74_MLCD_VSYNC	MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO14_2_MLCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF7, DS08X)
+#define GPIO15_2_MLCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF7, DS08X)
+#define GPIO16_2_MLCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF7, DS08X)
+#define GPIO17_2_MLCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF7, DS08X)
+
+/* MMC1 */
+#define GPIO9_MMC1_CMD		MFP_CFG_LPM(GPIO9,  AF4, DRIVE_HIGH)
+#define GPIO22_MMC1_CLK		MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH)
+#define GPIO23_MMC1_CMD		MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH)
+#define GPIO30_MMC1_CLK		MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH)
+#define GPIO31_MMC1_CMD		MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT0		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT1		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
+#define GPIO7_MMC1_DAT2		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_DAT3		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
+#define GPIO18_MMC1_DAT0	MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH)
+#define GPIO19_MMC1_DAT1	MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH)
+#define GPIO20_MMC1_DAT2	MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH)
+#define GPIO21_MMC1_DAT3	MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH)
+
+#define GPIO28_MMC2_CLK		MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH)
+#define GPIO29_MMC2_CMD		MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH)
+#define GPIO30_MMC2_CLK		MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH)
+#define GPIO31_MMC2_CMD		MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH)
+#define GPIO79_MMC2_CLK		MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_CMD		MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+
+#define GPIO5_MMC2_DAT0		MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH)
+#define GPIO6_MMC2_DAT1		MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH)
+#define GPIO7_MMC2_DAT2		MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH)
+#define GPIO8_MMC2_DAT3		MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH)
+#define GPIO24_MMC2_DAT0	MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH)
+#define GPIO75_MMC2_DAT0	MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH)
+#define GPIO25_MMC2_DAT1	MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH)
+#define GPIO76_MMC2_DAT1	MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH)
+#define GPIO26_MMC2_DAT2	MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT2	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO27_MMC2_DAT3	MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT3	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+
+/* 1-Wire */
+#define GPIO14_ONE_WIRE		MFP_CFG_LPM(GPIO14,  AF5, FLOAT)
+#define GPIO0_2_ONE_WIRE	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+
+/* SSP1 */
+#define GPIO87_SSP1_EXTCLK	MFP_CFG(GPIO87, AF1)
+#define GPIO88_SSP1_SYSCLK	MFP_CFG(GPIO88, AF1)
+#define GPIO83_SSP1_SCLK	MFP_CFG(GPIO83, AF1)
+#define GPIO84_SSP1_SFRM	MFP_CFG(GPIO84, AF1)
+#define GPIO85_SSP1_RXD		MFP_CFG(GPIO85, AF6)
+#define GPIO85_SSP1_TXD		MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_RXD		MFP_CFG(GPIO86, AF1)
+#define GPIO86_SSP1_TXD		MFP_CFG(GPIO86, AF6)
+
+/* SSP2 */
+#define GPIO39_SSP2_EXTCLK	MFP_CFG(GPIO39, AF2)
+#define GPIO40_SSP2_SYSCLK	MFP_CFG(GPIO40, AF2)
+#define GPIO12_SSP2_SCLK	MFP_CFG(GPIO12, AF2)
+#define GPIO35_SSP2_SCLK	MFP_CFG(GPIO35, AF2)
+#define GPIO36_SSP2_SFRM	MFP_CFG(GPIO36, AF2)
+#define GPIO37_SSP2_RXD		MFP_CFG(GPIO37, AF5)
+#define GPIO37_SSP2_TXD		MFP_CFG(GPIO37, AF2)
+#define GPIO38_SSP2_RXD		MFP_CFG(GPIO38, AF2)
+#define GPIO38_SSP2_TXD		MFP_CFG(GPIO38, AF5)
+
+#define GPIO69_SSP3_SCLK	MFP_CFG(GPIO69, AF2, DS08X, FLOAT)
+#define GPIO70_SSP3_FRM		MFP_CFG(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO89_SSP3_SCLK	MFP_CFG(GPIO89, AF1, DS08X, FLOAT)
+#define GPIO90_SSP3_FRM		MFP_CFG(GPIO90, AF1, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
+#define GPIO72_SSP3_RXD		MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
+#define GPIO72_SSP3_TXD		MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_RXD		MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT)
+#define GPIO91_SSP3_TXD		MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW)
+#define GPIO92_SSP3_RXD		MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT)
+#define GPIO92_SSP3_TXD		MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW)
+
+#define GPIO93_SSP4_SCLK	MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH)
+#define GPIO94_SSP4_FRM		MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH)
+#define GPIO94_SSP4_RXD		MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH)
+#define GPIO95_SSP4_RXD		MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH)
+#define GPIO95_SSP4_TXD		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_RXD		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO96_SSP4_TXD		MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH)
+
+/* UART1 */
+#define GPIO41_UART1_RXD	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO41_UART1_TXD	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_UART1_RXD	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+#define GPIO42_UART1_TXD	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO97_UART1_RXD	MFP_CFG_LPM(GPIO97, AF1, FLOAT)
+#define GPIO97_UART1_TXD	MFP_CFG_LPM(GPIO97, AF6, FLOAT)
+#define GPIO98_UART1_RXD	MFP_CFG_LPM(GPIO98, AF6, FLOAT)
+#define GPIO98_UART1_TXD	MFP_CFG_LPM(GPIO98, AF1, FLOAT)
+#define GPIO43_UART1_CTS	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO43_UART1_RTS	MFP_CFG_LPM(GPIO43, AF4, FLOAT)
+#define GPIO48_UART1_CTS	MFP_CFG_LPM(GPIO48, AF4, FLOAT)
+#define GPIO48_UART1_RTS	MFP_CFG_LPM(GPIO48, AF2, FLOAT)
+#define GPIO99_UART1_CTS	MFP_CFG_LPM(GPIO99, AF1, FLOAT)
+#define GPIO99_UART1_RTS	MFP_CFG_LPM(GPIO99, AF6, FLOAT)
+#define GPIO104_UART1_CTS	MFP_CFG_LPM(GPIO104, AF6, FLOAT)
+#define GPIO104_UART1_RTS	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+#define GPIO45_UART1_DTR	MFP_CFG_LPM(GPIO45, AF4, FLOAT)
+#define GPIO45_UART1_DSR	MFP_CFG_LPM(GPIO45, AF2, FLOAT)
+#define GPIO47_UART1_DTR	MFP_CFG_LPM(GPIO47, AF2, FLOAT)
+#define GPIO47_UART1_DSR	MFP_CFG_LPM(GPIO47, AF4, FLOAT)
+#define GPIO101_UART1_DTR	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO101_UART1_DSR	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO44_UART1_DCD	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO100_UART1_DCD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO46_UART1_RI		MFP_CFG_LPM(GPIO46, AF2, FLOAT)
+#define GPIO102_UART1_RI	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+/* UART2 */
+#define GPIO109_UART2_CTS	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO109_UART2_RTS	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO112_UART2_CTS	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO112_UART2_RTS	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO110_UART2_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+#define GPIO110_UART2_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+#define GPIO111_UART2_RXD	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO111_UART2_TXD	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO89_UART3_CTS	MFP_CFG_LPM(GPIO89, AF2, FLOAT)
+#define GPIO89_UART3_RTS	MFP_CFG_LPM(GPIO89, AF4, FLOAT)
+#define GPIO90_UART3_CTS	MFP_CFG_LPM(GPIO90, AF4, FLOAT)
+#define GPIO90_UART3_RTS	MFP_CFG_LPM(GPIO90, AF2, FLOAT)
+#define GPIO105_UART3_CTS	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+#define GPIO105_UART3_RTS	MFP_CFG_LPM(GPIO105, AF3, FLOAT)
+#define GPIO106_UART3_CTS	MFP_CFG_LPM(GPIO106, AF3, FLOAT)
+#define GPIO106_UART3_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+#define GPIO30_UART3_RXD	MFP_CFG_LPM(GPIO30, AF2, FLOAT)
+#define GPIO30_UART3_TXD	MFP_CFG_LPM(GPIO30, AF6, FLOAT)
+#define GPIO31_UART3_RXD	MFP_CFG_LPM(GPIO31, AF6, FLOAT)
+#define GPIO31_UART3_TXD	MFP_CFG_LPM(GPIO31, AF2, FLOAT)
+#define GPIO91_UART3_RXD	MFP_CFG_LPM(GPIO91, AF4, FLOAT)
+#define GPIO91_UART3_TXD	MFP_CFG_LPM(GPIO91, AF2, FLOAT)
+#define GPIO92_UART3_RXD	MFP_CFG_LPM(GPIO92, AF2, FLOAT)
+#define GPIO92_UART3_TXD	MFP_CFG_LPM(GPIO92, AF4, FLOAT)
+#define GPIO107_UART3_RXD	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO107_UART3_TXD	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_RXD	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+#define GPIO108_UART3_TXD	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+
+/* USB 2.0 UTMI */
+#define GPIO10_UTM_CLK		MFP_CFG(GPIO10, AF1)
+#define GPIO36_U2D_RXERROR	MFP_CFG(GPIO36, AF3)
+#define GPIO60_U2D_RXERROR	MFP_CFG(GPIO60, AF1)
+#define GPIO87_U2D_RXERROR	MFP_CFG(GPIO87, AF5)
+#define GPIO34_UTM_RXVALID	MFP_CFG(GPIO34, AF3)
+#define GPIO58_UTM_RXVALID	MFP_CFG(GPIO58, AF2)
+#define GPIO85_UTM_RXVALID	MFP_CFG(GPIO85, AF5)
+#define GPIO35_UTM_RXACTIVE	MFP_CFG(GPIO35, AF3)
+#define GPIO59_UTM_RXACTIVE	MFP_CFG(GPIO59, AF1)
+#define GPIO86_UTM_RXACTIVE	MFP_CFG(GPIO86, AF5)
+#define GPIO73_UTM_TXREADY	MFP_CFG(GPIO73, AF1)
+#define GPIO68_UTM_LINESTATE_0	MFP_CFG(GPIO68, AF3)
+#define GPIO90_UTM_LINESTATE_0	MFP_CFG(GPIO90, AF3)
+#define GPIO102_UTM_LINESTATE_0	MFP_CFG(GPIO102, AF3)
+#define GPIO107_UTM_LINESTATE_0	MFP_CFG(GPIO107, AF4)
+#define GPIO69_UTM_LINESTATE_1	MFP_CFG(GPIO69, AF3)
+#define GPIO91_UTM_LINESTATE_1	MFP_CFG(GPIO91, AF3)
+#define GPIO103_UTM_LINESTATE_1	MFP_CFG(GPIO103, AF3)
+
+#define GPIO41_U2D_PHYDATA_0	MFP_CFG(GPIO41, AF3)
+#define GPIO42_U2D_PHYDATA_1	MFP_CFG(GPIO42, AF3)
+#define GPIO43_U2D_PHYDATA_2	MFP_CFG(GPIO43, AF3)
+#define GPIO44_U2D_PHYDATA_3	MFP_CFG(GPIO44, AF3)
+#define GPIO45_U2D_PHYDATA_4	MFP_CFG(GPIO45, AF3)
+#define GPIO46_U2D_PHYDATA_5	MFP_CFG(GPIO46, AF3)
+#define GPIO47_U2D_PHYDATA_6	MFP_CFG(GPIO47, AF3)
+#define GPIO48_U2D_PHYDATA_7	MFP_CFG(GPIO48, AF3)
+
+#define GPIO49_U2D_PHYDATA_0	MFP_CFG(GPIO49, AF3)
+#define GPIO50_U2D_PHYDATA_1	MFP_CFG(GPIO50, AF3)
+#define GPIO51_U2D_PHYDATA_2	MFP_CFG(GPIO51, AF3)
+#define GPIO52_U2D_PHYDATA_3	MFP_CFG(GPIO52, AF3)
+#define GPIO53_U2D_PHYDATA_4	MFP_CFG(GPIO53, AF3)
+#define GPIO54_U2D_PHYDATA_5	MFP_CFG(GPIO54, AF3)
+#define GPIO55_U2D_PHYDATA_6	MFP_CFG(GPIO55, AF3)
+#define GPIO56_U2D_PHYDATA_7	MFP_CFG(GPIO56, AF3)
+
+#define GPIO37_U2D_OPMODE0	MFP_CFG(GPIO37, AF4)
+#define GPIO61_U2D_OPMODE0	MFP_CFG(GPIO61, AF2)
+#define GPIO88_U2D_OPMODE0	MFP_CFG(GPIO88, AF7)
+
+#define GPIO38_U2D_OPMODE1	MFP_CFG(GPIO38, AF4)
+#define GPIO62_U2D_OPMODE1	MFP_CFG(GPIO62, AF2)
+#define GPIO104_U2D_OPMODE1	MFP_CFG(GPIO104, AF4)
+#define GPIO108_U2D_OPMODE1	MFP_CFG(GPIO108, AF5)
+
+#define GPIO74_U2D_RESET	MFP_CFG(GPIO74, AF1)
+#define GPIO93_U2D_RESET	MFP_CFG(GPIO93, AF2)
+#define GPIO98_U2D_RESET	MFP_CFG(GPIO98, AF3)
+
+#define GPIO67_U2D_SUSPEND	MFP_CFG(GPIO67, AF3)
+#define GPIO96_U2D_SUSPEND	MFP_CFG(GPIO96, AF2)
+#define GPIO101_U2D_SUSPEND	MFP_CFG(GPIO101, AF3)
+
+#define GPIO66_U2D_TERM_SEL	MFP_CFG(GPIO66, AF5)
+#define GPIO95_U2D_TERM_SEL	MFP_CFG(GPIO95, AF3)
+#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97, AF7)
+#define GPIO100_U2D_TERM_SEL	MFP_CFG(GPIO100, AF5)
+
+#define GPIO39_U2D_TXVALID	MFP_CFG(GPIO39, AF4)
+#define GPIO70_U2D_TXVALID	MFP_CFG(GPIO70, AF5)
+#define GPIO83_U2D_TXVALID	MFP_CFG(GPIO83, AF7)
+
+#define GPIO65_U2D_XCVR_SEL	MFP_CFG(GPIO65, AF5)
+#define GPIO94_U2D_XCVR_SEL	MFP_CFG(GPIO94, AF3)
+#define GPIO99_U2D_XCVR_SEL	MFP_CFG(GPIO99, AF5)
+
+/* USB Host 1.1 */
+#define GPIO2_2_USBH_PEN	MFP_CFG(GPIO2_2, AF1)
+#define GPIO3_2_USBH_PWR	MFP_CFG(GPIO3_2, AF1)
+
+/* USB P2 */
+#define GPIO97_USB_P2_2		MFP_CFG(GPIO97, AF2)
+#define GPIO97_USB_P2_6		MFP_CFG(GPIO97, AF4)
+#define GPIO98_USB_P2_2		MFP_CFG(GPIO98, AF4)
+#define GPIO98_USB_P2_6		MFP_CFG(GPIO98, AF2)
+#define GPIO99_USB_P2_1		MFP_CFG(GPIO99, AF2)
+#define GPIO100_USB_P2_4	MFP_CFG(GPIO100, AF2)
+#define GPIO101_USB_P2_8	MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_3	MFP_CFG(GPIO102, AF2)
+#define GPIO103_USB_P2_5	MFP_CFG(GPIO103, AF2)
+#define GPIO104_USB_P2_7	MFP_CFG(GPIO104, AF2)
+
+/* USB P3 */
+#define GPIO75_USB_P3_1		MFP_CFG(GPIO75, AF2)
+#define GPIO76_USB_P3_2		MFP_CFG(GPIO76, AF2)
+#define GPIO77_USB_P3_3		MFP_CFG(GPIO77, AF2)
+#define GPIO78_USB_P3_4		MFP_CFG(GPIO78, AF2)
+#define GPIO79_USB_P3_5		MFP_CFG(GPIO79, AF2)
+#define GPIO80_USB_P3_6		MFP_CFG(GPIO80, AF2)
+
+#define GPIO13_CHOUT0		MFP_CFG(GPIO13, AF6)
+#define GPIO14_CHOUT1		MFP_CFG(GPIO14, AF6)
+
+#define GPIO2_RDY		MFP_CFG(GPIO2, AF1)
+#define GPIO5_NPIOR		MFP_CFG(GPIO5, AF3)
+
+#define GPIO11_PWM0_OUT		MFP_CFG(GPIO11, AF1)
+#define GPIO12_PWM1_OUT		MFP_CFG(GPIO12, AF1)
+#define GPIO13_PWM2_OUT		MFP_CFG(GPIO13, AF1)
+#define GPIO14_PWM3_OUT		MFP_CFG(GPIO14, AF1)
+
+#endif /* __ASM_ARCH_MFP_PXA320_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
new file mode 100644
index 000000000000..1f6b35c015d0
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
@@ -0,0 +1,252 @@
+#ifndef __ASM_ARCH_MFP_PXA3XX_H
+#define __ASM_ARCH_MFP_PXA3XX_H
+
+#define MFPR_BASE	(0x40e10000)
+#define MFPR_SIZE	(PAGE_SIZE)
+
+/* MFPR register bit definitions */
+#define MFPR_PULL_SEL		(0x1 << 15)
+#define MFPR_PULLUP_EN		(0x1 << 14)
+#define MFPR_PULLDOWN_EN	(0x1 << 13)
+#define MFPR_SLEEP_SEL		(0x1 << 9)
+#define MFPR_SLEEP_OE_N		(0x1 << 7)
+#define MFPR_EDGE_CLEAR		(0x1 << 6)
+#define MFPR_EDGE_FALL_EN	(0x1 << 5)
+#define MFPR_EDGE_RISE_EN	(0x1 << 4)
+
+#define MFPR_SLEEP_DATA(x)	((x) << 8)
+#define MFPR_DRIVE(x)		(((x) & 0x7) << 10)
+#define MFPR_AF_SEL(x)		(((x) & 0x7) << 0)
+
+#define MFPR_EDGE_NONE		(0)
+#define MFPR_EDGE_RISE		(MFPR_EDGE_RISE_EN)
+#define MFPR_EDGE_FALL		(MFPR_EDGE_FALL_EN)
+#define MFPR_EDGE_BOTH		(MFPR_EDGE_RISE | MFPR_EDGE_FALL)
+
+/*
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
+ *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
+ *
+ * Input            0          X(0)        X(0)        X(0)       0
+ * Drive 0          0          0           0           X(1)       0
+ * Drive 1          0          1           X(1)        0	  0
+ * Pull hi (1)      1          X(1)        1           0	  0
+ * Pull lo (0)      1          X(0)        0           1	  0
+ * Z (float)        1          X(0)        0           0	  0
+ */
+#define MFPR_LPM_INPUT		(0)
+#define MFPR_LPM_DRIVE_LOW	(MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
+#define MFPR_LPM_DRIVE_HIGH    	(MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
+#define MFPR_LPM_PULL_LOW      	(MFPR_LPM_DRIVE_LOW  | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_PULL_HIGH     	(MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_FLOAT         	(MFPR_SLEEP_OE_N)
+#define MFPR_LPM_MASK		(0xe080)
+
+/*
+ * The pullup and pulldown state of the MFP pin at run mode is by default
+ * determined by the selected alternate function. In case that some buggy
+ * devices need to override this default behavior,  the definitions below
+ * indicates the setting of corresponding MFPR bits
+ *
+ * Definition       pull_sel  pullup_en  pulldown_en
+ * MFPR_PULL_NONE       0         0        0
+ * MFPR_PULL_LOW        1         0        1
+ * MFPR_PULL_HIGH       1         1        0
+ * MFPR_PULL_BOTH       1         1        1
+ */
+#define MFPR_PULL_NONE		(0)
+#define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
+#define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
+#define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
+
+/* PXA3xx common MFP configurations - processor specific ones defined
+ * in mfp-pxa300.h and mfp-pxa320.h
+ */
+#define GPIO0_GPIO		MFP_CFG(GPIO0, AF0)
+#define GPIO1_GPIO		MFP_CFG(GPIO1, AF0)
+#define GPIO2_GPIO		MFP_CFG(GPIO2, AF0)
+#define GPIO3_GPIO		MFP_CFG(GPIO3, AF0)
+#define GPIO4_GPIO		MFP_CFG(GPIO4, AF0)
+#define GPIO5_GPIO		MFP_CFG(GPIO5, AF0)
+#define GPIO6_GPIO		MFP_CFG(GPIO6, AF0)
+#define GPIO7_GPIO		MFP_CFG(GPIO7, AF0)
+#define GPIO8_GPIO		MFP_CFG(GPIO8, AF0)
+#define GPIO9_GPIO		MFP_CFG(GPIO9, AF0)
+#define GPIO10_GPIO		MFP_CFG(GPIO10, AF0)
+#define GPIO11_GPIO		MFP_CFG(GPIO11, AF0)
+#define GPIO12_GPIO		MFP_CFG(GPIO12, AF0)
+#define GPIO13_GPIO		MFP_CFG(GPIO13, AF0)
+#define GPIO14_GPIO		MFP_CFG(GPIO14, AF0)
+#define GPIO15_GPIO		MFP_CFG(GPIO15, AF0)
+#define GPIO16_GPIO		MFP_CFG(GPIO16, AF0)
+#define GPIO17_GPIO		MFP_CFG(GPIO17, AF0)
+#define GPIO18_GPIO		MFP_CFG(GPIO18, AF0)
+#define GPIO19_GPIO		MFP_CFG(GPIO19, AF0)
+#define GPIO20_GPIO		MFP_CFG(GPIO20, AF0)
+#define GPIO21_GPIO		MFP_CFG(GPIO21, AF0)
+#define GPIO22_GPIO		MFP_CFG(GPIO22, AF0)
+#define GPIO23_GPIO		MFP_CFG(GPIO23, AF0)
+#define GPIO24_GPIO		MFP_CFG(GPIO24, AF0)
+#define GPIO25_GPIO		MFP_CFG(GPIO25, AF0)
+#define GPIO26_GPIO		MFP_CFG(GPIO26, AF0)
+#define GPIO27_GPIO		MFP_CFG(GPIO27, AF0)
+#define GPIO28_GPIO		MFP_CFG(GPIO28, AF0)
+#define GPIO29_GPIO		MFP_CFG(GPIO29, AF0)
+#define GPIO30_GPIO		MFP_CFG(GPIO30, AF0)
+#define GPIO31_GPIO		MFP_CFG(GPIO31, AF0)
+#define GPIO32_GPIO		MFP_CFG(GPIO32, AF0)
+#define GPIO33_GPIO		MFP_CFG(GPIO33, AF0)
+#define GPIO34_GPIO		MFP_CFG(GPIO34, AF0)
+#define GPIO35_GPIO		MFP_CFG(GPIO35, AF0)
+#define GPIO36_GPIO		MFP_CFG(GPIO36, AF0)
+#define GPIO37_GPIO		MFP_CFG(GPIO37, AF0)
+#define GPIO38_GPIO		MFP_CFG(GPIO38, AF0)
+#define GPIO39_GPIO		MFP_CFG(GPIO39, AF0)
+#define GPIO40_GPIO		MFP_CFG(GPIO40, AF0)
+#define GPIO41_GPIO		MFP_CFG(GPIO41, AF0)
+#define GPIO42_GPIO		MFP_CFG(GPIO42, AF0)
+#define GPIO43_GPIO		MFP_CFG(GPIO43, AF0)
+#define GPIO44_GPIO		MFP_CFG(GPIO44, AF0)
+#define GPIO45_GPIO		MFP_CFG(GPIO45, AF0)
+
+#define GPIO47_GPIO		MFP_CFG(GPIO47, AF0)
+#define GPIO48_GPIO		MFP_CFG(GPIO48, AF0)
+
+#define GPIO53_GPIO		MFP_CFG(GPIO53, AF0)
+#define GPIO54_GPIO		MFP_CFG(GPIO54, AF0)
+#define GPIO55_GPIO		MFP_CFG(GPIO55, AF0)
+
+#define GPIO57_GPIO		MFP_CFG(GPIO57, AF0)
+
+#define GPIO63_GPIO		MFP_CFG(GPIO63, AF0)
+#define GPIO64_GPIO		MFP_CFG(GPIO64, AF0)
+#define GPIO65_GPIO		MFP_CFG(GPIO65, AF0)
+#define GPIO66_GPIO		MFP_CFG(GPIO66, AF0)
+#define GPIO67_GPIO		MFP_CFG(GPIO67, AF0)
+#define GPIO68_GPIO		MFP_CFG(GPIO68, AF0)
+#define GPIO69_GPIO		MFP_CFG(GPIO69, AF0)
+#define GPIO70_GPIO		MFP_CFG(GPIO70, AF0)
+#define GPIO71_GPIO		MFP_CFG(GPIO71, AF0)
+#define GPIO72_GPIO		MFP_CFG(GPIO72, AF0)
+#define GPIO73_GPIO		MFP_CFG(GPIO73, AF0)
+#define GPIO74_GPIO		MFP_CFG(GPIO74, AF0)
+#define GPIO75_GPIO		MFP_CFG(GPIO75, AF0)
+#define GPIO76_GPIO		MFP_CFG(GPIO76, AF0)
+#define GPIO77_GPIO		MFP_CFG(GPIO77, AF0)
+#define GPIO78_GPIO		MFP_CFG(GPIO78, AF0)
+#define GPIO79_GPIO		MFP_CFG(GPIO79, AF0)
+#define GPIO80_GPIO		MFP_CFG(GPIO80, AF0)
+#define GPIO81_GPIO		MFP_CFG(GPIO81, AF0)
+#define GPIO82_GPIO		MFP_CFG(GPIO82, AF0)
+#define GPIO83_GPIO		MFP_CFG(GPIO83, AF0)
+#define GPIO84_GPIO		MFP_CFG(GPIO84, AF0)
+#define GPIO85_GPIO		MFP_CFG(GPIO85, AF0)
+#define GPIO86_GPIO		MFP_CFG(GPIO86, AF0)
+#define GPIO87_GPIO		MFP_CFG(GPIO87, AF0)
+#define GPIO88_GPIO		MFP_CFG(GPIO88, AF0)
+#define GPIO89_GPIO		MFP_CFG(GPIO89, AF0)
+#define GPIO90_GPIO		MFP_CFG(GPIO90, AF0)
+#define GPIO91_GPIO		MFP_CFG(GPIO91, AF0)
+#define GPIO92_GPIO		MFP_CFG(GPIO92, AF0)
+#define GPIO93_GPIO		MFP_CFG(GPIO93, AF0)
+#define GPIO94_GPIO		MFP_CFG(GPIO94, AF0)
+#define GPIO95_GPIO		MFP_CFG(GPIO95, AF0)
+#define GPIO96_GPIO		MFP_CFG(GPIO96, AF0)
+#define GPIO97_GPIO		MFP_CFG(GPIO97, AF0)
+#define GPIO98_GPIO		MFP_CFG(GPIO98, AF0)
+#define GPIO99_GPIO		MFP_CFG(GPIO99, AF0)
+#define GPIO100_GPIO		MFP_CFG(GPIO100, AF0)
+#define GPIO101_GPIO		MFP_CFG(GPIO101, AF0)
+#define GPIO102_GPIO		MFP_CFG(GPIO102, AF0)
+#define GPIO103_GPIO		MFP_CFG(GPIO103, AF0)
+#define GPIO104_GPIO		MFP_CFG(GPIO104, AF0)
+#define GPIO105_GPIO		MFP_CFG(GPIO105, AF0)
+#define GPIO106_GPIO		MFP_CFG(GPIO106, AF0)
+#define GPIO107_GPIO		MFP_CFG(GPIO107, AF0)
+#define GPIO108_GPIO		MFP_CFG(GPIO108, AF0)
+#define GPIO109_GPIO		MFP_CFG(GPIO109, AF0)
+#define GPIO110_GPIO		MFP_CFG(GPIO110, AF0)
+#define GPIO111_GPIO		MFP_CFG(GPIO111, AF0)
+#define GPIO112_GPIO		MFP_CFG(GPIO112, AF0)
+#define GPIO113_GPIO		MFP_CFG(GPIO113, AF0)
+#define GPIO114_GPIO		MFP_CFG(GPIO114, AF0)
+#define GPIO115_GPIO		MFP_CFG(GPIO115, AF0)
+#define GPIO116_GPIO		MFP_CFG(GPIO116, AF0)
+#define GPIO117_GPIO		MFP_CFG(GPIO117, AF0)
+#define GPIO118_GPIO		MFP_CFG(GPIO118, AF0)
+#define GPIO119_GPIO		MFP_CFG(GPIO119, AF0)
+#define GPIO120_GPIO		MFP_CFG(GPIO120, AF0)
+#define GPIO121_GPIO		MFP_CFG(GPIO121, AF0)
+#define GPIO122_GPIO		MFP_CFG(GPIO122, AF0)
+#define GPIO123_GPIO		MFP_CFG(GPIO123, AF0)
+#define GPIO124_GPIO		MFP_CFG(GPIO124, AF0)
+#define GPIO125_GPIO		MFP_CFG(GPIO125, AF0)
+#define GPIO126_GPIO		MFP_CFG(GPIO126, AF0)
+#define GPIO127_GPIO		MFP_CFG(GPIO127, AF0)
+
+#define GPIO0_2_GPIO		MFP_CFG(GPIO0_2, AF0)
+#define GPIO1_2_GPIO		MFP_CFG(GPIO1_2, AF0)
+#define GPIO2_2_GPIO		MFP_CFG(GPIO2_2, AF0)
+#define GPIO3_2_GPIO		MFP_CFG(GPIO3_2, AF0)
+#define GPIO4_2_GPIO		MFP_CFG(GPIO4_2, AF0)
+#define GPIO5_2_GPIO		MFP_CFG(GPIO5_2, AF0)
+#define GPIO6_2_GPIO		MFP_CFG(GPIO6_2, AF0)
+
+/*
+ * each MFP pin will have a MFPR register, since the offset of the
+ * register varies between processors, the processor specific code
+ * should initialize the pin offsets by pxa3xx_mfp_init_addr()
+ *
+ * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map"
+ * structure, which represents a range of MFP pins from "start" to
+ * "end", with the offset begining at "offset", to define a single
+ * pin, let "end" = -1
+ *
+ * use
+ *
+ * MFP_ADDR_X() to define a range of pins
+ * MFP_ADDR()   to define a single pin
+ * MFP_ADDR_END to signal the end of pin offset definitions
+ */
+struct pxa3xx_mfp_addr_map {
+	unsigned int	start;
+	unsigned int	end;
+	unsigned long	offset;
+};
+
+#define MFP_ADDR_X(start, end, offset) \
+	{ MFP_PIN_##start, MFP_PIN_##end, offset }
+
+#define MFP_ADDR(pin, offset) \
+	{ MFP_PIN_##pin, -1, offset }
+
+#define MFP_ADDR_END	{ MFP_PIN_INVALID, 0 }
+
+/*
+ * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access
+ * to the MFPR register
+ */
+unsigned long pxa3xx_mfp_read(int mfp);
+void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
+
+/*
+ * pxa3xx_mfp_config - configure the MFPR registers
+ *
+ * used by board specific initialization code
+ */
+void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num);
+
+/*
+ * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin
+ * index and MFPR register offset
+ *
+ * used by processor specific code
+ */
+void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *);
+void __init pxa3xx_init_mfp(void);
+#endif /* __ASM_ARCH_MFP_PXA3XX_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
new file mode 100644
index 000000000000..fabd9b4df827
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -0,0 +1,491 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+ *
+ * PXA930 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA9xx_H
+#define __ASM_ARCH_MFP_PXA9xx_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
+#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
+
+#define GSIM_UCLK_GPIO_79	MFP_CFG(GSIM_UCLK, AF0)
+#define GSIM_UIO_GPIO_80	MFP_CFG(GSIM_UIO, AF0)
+#define GSIM_nURST_GPIO_81	MFP_CFG(GSIM_nURST, AF0)
+#define GSIM_UDET_GPIO_82	MFP_CFG(GSIM_UDET, AF0)
+
+#define DF_IO15_GPIO_28		MFP_CFG(DF_IO15, AF0)
+#define DF_IO14_GPIO_29		MFP_CFG(DF_IO14, AF0)
+#define DF_IO13_GPIO_30		MFP_CFG(DF_IO13, AF0)
+#define DF_IO12_GPIO_31		MFP_CFG(DF_IO12, AF0)
+#define DF_IO11_GPIO_32		MFP_CFG(DF_IO11, AF0)
+#define DF_IO10_GPIO_33		MFP_CFG(DF_IO10, AF0)
+#define DF_IO9_GPIO_34		MFP_CFG(DF_IO9, AF0)
+#define DF_IO8_GPIO_35		MFP_CFG(DF_IO8, AF0)
+#define DF_IO7_GPIO_36		MFP_CFG(DF_IO7, AF0)
+#define DF_IO6_GPIO_37		MFP_CFG(DF_IO6, AF0)
+#define DF_IO5_GPIO_38		MFP_CFG(DF_IO5, AF0)
+#define DF_IO4_GPIO_39		MFP_CFG(DF_IO4, AF0)
+#define DF_IO3_GPIO_40		MFP_CFG(DF_IO3, AF0)
+#define DF_IO2_GPIO_41		MFP_CFG(DF_IO2, AF0)
+#define DF_IO1_GPIO_42		MFP_CFG(DF_IO1, AF0)
+#define DF_IO0_GPIO_43		MFP_CFG(DF_IO0, AF0)
+#define DF_nCS0_GPIO_44		MFP_CFG(DF_nCS0, AF0)
+#define DF_nCS1_GPIO_45		MFP_CFG(DF_nCS1, AF0)
+#define DF_nWE_GPIO_46		MFP_CFG(DF_nWE, AF0)
+#define DF_nRE_nOE_GPIO_47	MFP_CFG(DF_nRE_nOE, AF0)
+#define DF_CLE_nOE_GPIO_48	MFP_CFG(DF_CLE_nOE, AF0)
+#define DF_nADV1_ALE_GPIO_49	MFP_CFG(DF_nADV1_ALE, AF0)
+#define DF_nADV2_ALE_GPIO_50	MFP_CFG(DF_nADV2_ALE, AF0)
+#define DF_INT_RnB_GPIO_51	MFP_CFG(DF_INT_RnB, AF0)
+#define DF_SCLK_E_GPIO_52	MFP_CFG(DF_SCLK_E, AF0)
+
+#define DF_ADDR0_GPIO_53	MFP_CFG(DF_ADDR0, AF0)
+#define DF_ADDR1_GPIO_54	MFP_CFG(DF_ADDR1, AF0)
+#define DF_ADDR2_GPIO_55	MFP_CFG(DF_ADDR2, AF0)
+#define DF_ADDR3_GPIO_56	MFP_CFG(DF_ADDR3, AF0)
+#define nXCVREN_GPIO_57		MFP_CFG(nXCVREN, AF0)
+#define nLUA_GPIO_58		MFP_CFG(nLUA, AF0)
+#define nLLA_GPIO_59		MFP_CFG(nLLA, AF0)
+#define nBE0_GPIO_60		MFP_CFG(nBE0, AF0)
+#define nBE1_GPIO_61		MFP_CFG(nBE1, AF0)
+#define RDY_GPIO_62		MFP_CFG(RDY, AF0)
+
+/* Chip Select */
+#define DF_nCS0_nCS2		MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
+#define DF_nCS1_nCS3		MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH)
+
+/* AC97 */
+#define GPIO83_BAC97_SYSCLK	MFP_CFG(GPIO83, AF3)
+#define GPIO84_BAC97_SDATA_IN0	MFP_CFG(GPIO84, AF3)
+#define GPIO85_BAC97_BITCLK	MFP_CFG(GPIO85, AF3)
+#define GPIO86_BAC97_nRESET	MFP_CFG(GPIO86, AF3)
+#define GPIO87_BAC97_SYNC	MFP_CFG(GPIO87, AF3)
+#define GPIO88_BAC97_SDATA_OUT	MFP_CFG(GPIO88, AF3)
+
+/* I2C */
+#define GPIO39_CI2C_SCL		MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH)
+#define GPIO40_CI2C_SDA		MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH)
+
+#define GPIO51_CI2C_SCL		MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH)
+#define GPIO52_CI2C_SDA		MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH)
+
+#define GPIO63_CI2C_SCL		MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
+#define GPIO64_CI2C_SDA		MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
+
+#define GPIO77_CI2C_SCL		MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
+#define GPIO78_CI2C_SDA		MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
+
+#define GPIO89_CI2C_SCL		MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH)
+#define GPIO90_CI2C_SDA		MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH)
+
+#define GPIO95_CI2C_SCL		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_CI2C_SDA		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+
+#define GPIO97_CI2C_SCL		MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH)
+#define GPIO98_CI2C_SDA		MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH)
+
+/* QCI */
+#define GPIO63_CI_DD_9		MFP_CFG_LPM(GPIO63, AF1, PULL_LOW)
+#define GPIO64_CI_DD_8		MFP_CFG_LPM(GPIO64, AF1, PULL_LOW)
+#define GPIO65_CI_DD_7		MFP_CFG_LPM(GPIO65, AF1, PULL_LOW)
+#define GPIO66_CI_DD_6		MFP_CFG_LPM(GPIO66, AF1, PULL_LOW)
+#define GPIO67_CI_DD_5		MFP_CFG_LPM(GPIO67, AF1, PULL_LOW)
+#define GPIO68_CI_DD_4		MFP_CFG_LPM(GPIO68, AF1, PULL_LOW)
+#define GPIO69_CI_DD_3		MFP_CFG_LPM(GPIO69, AF1, PULL_LOW)
+#define GPIO70_CI_DD_2		MFP_CFG_LPM(GPIO70, AF1, PULL_LOW)
+#define GPIO71_CI_DD_1		MFP_CFG_LPM(GPIO71, AF1, PULL_LOW)
+#define GPIO72_CI_DD_0		MFP_CFG_LPM(GPIO72, AF1, PULL_LOW)
+#define GPIO73_CI_HSYNC		MFP_CFG_LPM(GPIO73, AF1, PULL_LOW)
+#define GPIO74_CI_VSYNC		MFP_CFG_LPM(GPIO74, AF1, PULL_LOW)
+#define GPIO75_CI_MCLK		MFP_CFG_LPM(GPIO75, AF1, PULL_LOW)
+#define GPIO76_CI_PCLK		MFP_CFG_LPM(GPIO76, AF1, PULL_LOW)
+
+/* KEYPAD */
+#define GPIO4_KP_DKIN_4		MFP_CFG_LPM(GPIO4, AF3, FLOAT)
+#define GPIO5_KP_DKIN_5		MFP_CFG_LPM(GPIO5, AF3, FLOAT)
+#define GPIO6_KP_DKIN_6		MFP_CFG_LPM(GPIO6, AF3, FLOAT)
+#define GPIO7_KP_DKIN_7		MFP_CFG_LPM(GPIO7, AF3, FLOAT)
+#define GPIO8_KP_DKIN_4		MFP_CFG_LPM(GPIO8, AF3, FLOAT)
+#define GPIO9_KP_DKIN_5		MFP_CFG_LPM(GPIO9, AF3, FLOAT)
+#define GPIO10_KP_DKIN_6	MFP_CFG_LPM(GPIO10, AF3, FLOAT)
+#define GPIO11_KP_DKIN_7	MFP_CFG_LPM(GPIO11, AF3, FLOAT)
+
+#define GPIO12_KP_DKIN_0	MFP_CFG_LPM(GPIO12, AF2, FLOAT)
+#define GPIO13_KP_DKIN_1	MFP_CFG_LPM(GPIO13, AF2, FLOAT)
+#define GPIO14_KP_DKIN_2	MFP_CFG_LPM(GPIO14, AF2, FLOAT)
+#define GPIO15_KP_DKIN_3	MFP_CFG_LPM(GPIO15, AF2, FLOAT)
+
+#define GPIO41_KP_DKIN_0	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO42_KP_DKIN_1	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO43_KP_DKIN_2	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO44_KP_DKIN_3	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO41_KP_DKIN_4	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_KP_DKIN_5	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+
+#define GPIO0_KP_MKIN_0		MFP_CFG_LPM(GPIO0, AF1, FLOAT)
+#define GPIO2_KP_MKIN_1		MFP_CFG_LPM(GPIO2, AF1, FLOAT)
+#define GPIO4_KP_MKIN_2		MFP_CFG_LPM(GPIO4, AF1, FLOAT)
+#define GPIO6_KP_MKIN_3		MFP_CFG_LPM(GPIO6, AF1, FLOAT)
+#define GPIO8_KP_MKIN_4		MFP_CFG_LPM(GPIO8, AF1, FLOAT)
+#define GPIO10_KP_MKIN_5	MFP_CFG_LPM(GPIO10, AF1, FLOAT)
+#define GPIO12_KP_MKIN_6	MFP_CFG_LPM(GPIO12, AF1, FLOAT)
+#define GPIO14_KP_MKIN_7	MFP_CFG(GPIO14, AF1)
+#define GPIO35_KP_MKIN_5	MFP_CFG(GPIO35, AF4)
+
+#define GPIO1_KP_MKOUT_0	MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH)
+#define GPIO3_KP_MKOUT_1	MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH)
+#define GPIO5_KP_MKOUT_2	MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH)
+#define GPIO7_KP_MKOUT_3	MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
+#define GPIO9_KP_MKOUT_4	MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_6	MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH)
+#define GPIO15_KP_MKOUT_7	MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO36_KP_MKOUT_5	MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO17_LCD_FCLK_RD	MFP_CFG(GPIO17, AF1)
+#define GPIO18_LCD_LCLK_A0	MFP_CFG(GPIO18, AF1)
+#define GPIO19_LCD_PCLK_WR	MFP_CFG(GPIO19, AF1)
+#define GPIO20_LCD_BIAS		MFP_CFG(GPIO20, AF1)
+#define GPIO21_LCD_CS		MFP_CFG(GPIO21, AF1)
+#define GPIO22_LCD_CS2		MFP_CFG(GPIO22, AF2)
+#define GPIO22_LCD_VSYNC	MFP_CFG(GPIO22, AF1)
+#define GPIO23_LCD_DD0		MFP_CFG(GPIO23, AF1)
+#define GPIO24_LCD_DD1		MFP_CFG(GPIO24, AF1)
+#define GPIO25_LCD_DD2		MFP_CFG(GPIO25, AF1)
+#define GPIO26_LCD_DD3		MFP_CFG(GPIO26, AF1)
+#define GPIO27_LCD_DD4		MFP_CFG(GPIO27, AF1)
+#define GPIO28_LCD_DD5		MFP_CFG(GPIO28, AF1)
+#define GPIO29_LCD_DD6		MFP_CFG(GPIO29, AF1)
+#define GPIO30_LCD_DD7		MFP_CFG(GPIO30, AF1)
+#define GPIO31_LCD_DD8		MFP_CFG(GPIO31, AF1)
+#define GPIO32_LCD_DD9		MFP_CFG(GPIO32, AF1)
+#define GPIO33_LCD_DD10		MFP_CFG(GPIO33, AF1)
+#define GPIO34_LCD_DD11		MFP_CFG(GPIO34, AF1)
+#define GPIO35_LCD_DD12		MFP_CFG(GPIO35, AF1)
+#define GPIO36_LCD_DD13		MFP_CFG(GPIO36, AF1)
+#define GPIO37_LCD_DD14		MFP_CFG(GPIO37, AF1)
+#define GPIO38_LCD_DD15		MFP_CFG(GPIO38, AF1)
+#define GPIO39_LCD_DD16		MFP_CFG(GPIO39, AF1)
+#define GPIO40_LCD_DD17		MFP_CFG(GPIO40, AF1)
+#define GPIO41_LCD_CS2		MFP_CFG(GPIO41, AF3)
+#define GPIO42_LCD_VSYNC2	MFP_CFG(GPIO42, AF3)
+#define GPIO44_LCD_DD7		MFP_CFG(GPIO44, AF1)
+
+/* Mini-LCD */
+#define GPIO17_MLCD_FCLK	MFP_CFG(GPIO17, AF3)
+#define GPIO18_MLCD_LCLK	MFP_CFG(GPIO18, AF3)
+#define GPIO19_MLCD_PCLK	MFP_CFG(GPIO19, AF3)
+#define GPIO20_MLCD_BIAS	MFP_CFG(GPIO20, AF3)
+#define GPIO23_MLCD_DD0		MFP_CFG(GPIO23, AF3)
+#define GPIO24_MLCD_DD1		MFP_CFG(GPIO24, AF3)
+#define GPIO25_MLCD_DD2		MFP_CFG(GPIO25, AF3)
+#define GPIO26_MLCD_DD3		MFP_CFG(GPIO26, AF3)
+#define GPIO27_MLCD_DD4		MFP_CFG(GPIO27, AF3)
+#define GPIO28_MLCD_DD5		MFP_CFG(GPIO28, AF3)
+#define GPIO29_MLCD_DD6		MFP_CFG(GPIO29, AF3)
+#define GPIO30_MLCD_DD7		MFP_CFG(GPIO30, AF3)
+#define GPIO31_MLCD_DD8		MFP_CFG(GPIO31, AF3)
+#define GPIO32_MLCD_DD9		MFP_CFG(GPIO32, AF3)
+#define GPIO33_MLCD_DD10	MFP_CFG(GPIO33, AF3)
+#define GPIO34_MLCD_DD11	MFP_CFG(GPIO34, AF3)
+#define GPIO35_MLCD_DD12	MFP_CFG(GPIO35, AF3)
+#define GPIO36_MLCD_DD13	MFP_CFG(GPIO36, AF3)
+#define GPIO37_MLCD_DD14	MFP_CFG(GPIO37, AF3)
+#define GPIO38_MLCD_DD15	MFP_CFG(GPIO38, AF3)
+#define GPIO44_MLCD_DD7		MFP_CFG(GPIO44, AF5)
+
+/* MMC1 */
+#define GPIO10_MMC1_DAT3	MFP_CFG(GPIO10, AF4)
+#define GPIO11_MMC1_DAT2	MFP_CFG(GPIO11, AF4)
+#define GPIO12_MMC1_DAT1	MFP_CFG(GPIO12, AF4)
+#define GPIO13_MMC1_DAT0	MFP_CFG(GPIO13, AF4)
+#define GPIO14_MMC1_CMD		MFP_CFG(GPIO14, AF4)
+#define GPIO15_MMC1_CLK		MFP_CFG(GPIO15, AF4)
+#define GPIO55_MMC1_CMD		MFP_CFG(GPIO55, AF3)
+#define GPIO56_MMC1_CLK		MFP_CFG(GPIO56, AF3)
+#define GPIO57_MMC1_DAT0	MFP_CFG(GPIO57, AF3)
+#define GPIO58_MMC1_DAT1	MFP_CFG(GPIO58, AF3)
+#define GPIO59_MMC1_DAT2	MFP_CFG(GPIO59, AF3)
+#define GPIO60_MMC1_DAT3	MFP_CFG(GPIO60, AF3)
+
+#define DF_ADDR0_MMC1_CLK	MFP_CFG(DF_ADDR0, AF2)
+#define DF_ADDR1_MMC1_CMD	MFP_CFG(DF_ADDR1, AF2)
+#define DF_ADDR2_MMC1_DAT0	MFP_CFG(DF_ADDR2, AF2)
+#define DF_ADDR3_MMC1_DAT1	MFP_CFG(DF_ADDR3, AF3)
+#define nXCVREN_MMC1_DAT2	MFP_CFG(nXCVREN, AF2)
+
+/* MMC2 */
+#define GPIO31_MMC2_CMD		MFP_CFG(GPIO31, AF7)
+#define GPIO32_MMC2_CLK		MFP_CFG(GPIO32, AF7)
+#define GPIO33_MMC2_DAT0	MFP_CFG(GPIO33, AF7)
+#define GPIO34_MMC2_DAT1	MFP_CFG(GPIO34, AF7)
+#define GPIO35_MMC2_DAT2	MFP_CFG(GPIO35, AF7)
+#define GPIO36_MMC2_DAT3	MFP_CFG(GPIO36, AF7)
+
+#define GPIO101_MMC2_DAT3	MFP_CFG(GPIO101, AF1)
+#define GPIO102_MMC2_DAT2	MFP_CFG(GPIO102, AF1)
+#define GPIO103_MMC2_DAT1	MFP_CFG(GPIO103, AF1)
+#define GPIO104_MMC2_DAT0	MFP_CFG(GPIO104, AF1)
+#define GPIO105_MMC2_CMD	MFP_CFG(GPIO105, AF1)
+#define GPIO106_MMC2_CLK	MFP_CFG(GPIO106, AF1)
+
+#define DF_IO10_MMC2_DAT3	MFP_CFG(DF_IO10, AF3)
+#define DF_IO11_MMC2_DAT2	MFP_CFG(DF_IO11, AF3)
+#define DF_IO12_MMC2_DAT1	MFP_CFG(DF_IO12, AF3)
+#define DF_IO13_MMC2_DAT0	MFP_CFG(DF_IO13, AF3)
+#define DF_IO14_MMC2_CLK	MFP_CFG(DF_IO14, AF3)
+#define DF_IO15_MMC2_CMD	MFP_CFG(DF_IO15, AF3)
+
+/* BSSP1 */
+#define GPIO12_BSSP1_CLK	MFP_CFG(GPIO12, AF3)
+#define GPIO13_BSSP1_FRM	MFP_CFG(GPIO13, AF3)
+#define GPIO14_BSSP1_RXD	MFP_CFG(GPIO14, AF3)
+#define GPIO15_BSSP1_TXD	MFP_CFG(GPIO15, AF3)
+#define GPIO97_BSSP1_CLK	MFP_CFG(GPIO97, AF5)
+#define GPIO98_BSSP1_FRM	MFP_CFG(GPIO98, AF5)
+
+/* BSSP2 */
+#define GPIO84_BSSP2_SDATA_IN	MFP_CFG(GPIO84, AF1)
+#define GPIO85_BSSP2_BITCLK	MFP_CFG(GPIO85, AF1)
+#define GPIO86_BSSP2_SYSCLK	MFP_CFG(GPIO86, AF1)
+#define GPIO87_BSSP2_SYNC	MFP_CFG(GPIO87, AF1)
+#define GPIO88_BSSP2_DATA_OUT	MFP_CFG(GPIO88, AF1)
+#define GPIO86_BSSP2_SDATA_IN	MFP_CFG(GPIO86, AF4)
+
+/* BSSP3 */
+#define GPIO79_BSSP3_CLK	MFP_CFG(GPIO79, AF1)
+#define GPIO80_BSSP3_FRM	MFP_CFG(GPIO80, AF1)
+#define GPIO81_BSSP3_TXD	MFP_CFG(GPIO81, AF1)
+#define GPIO82_BSSP3_RXD	MFP_CFG(GPIO82, AF1)
+#define GPIO83_BSSP3_SYSCLK	MFP_CFG(GPIO83, AF1)
+
+/* BSSP4 */
+#define GPIO43_BSSP4_CLK	MFP_CFG(GPIO43, AF4)
+#define GPIO44_BSSP4_FRM	MFP_CFG(GPIO44, AF4)
+#define GPIO45_BSSP4_TXD	MFP_CFG(GPIO45, AF4)
+#define GPIO46_BSSP4_RXD	MFP_CFG(GPIO46, AF4)
+
+#define GPIO51_BSSP4_CLK	MFP_CFG(GPIO51, AF4)
+#define GPIO52_BSSP4_FRM	MFP_CFG(GPIO52, AF4)
+#define GPIO53_BSSP4_TXD	MFP_CFG(GPIO53, AF4)
+#define GPIO54_BSSP4_RXD	MFP_CFG(GPIO54, AF4)
+
+/* GSSP1 */
+#define GPIO79_GSSP1_CLK	MFP_CFG(GPIO79, AF2)
+#define GPIO80_GSSP1_FRM	MFP_CFG(GPIO80, AF2)
+#define GPIO81_GSSP1_TXD	MFP_CFG(GPIO81, AF2)
+#define GPIO82_GSSP1_RXD	MFP_CFG(GPIO82, AF2)
+#define GPIO83_GSSP1_SYSCLK	MFP_CFG(GPIO83, AF2)
+
+#define GPIO93_GSSP1_CLK	MFP_CFG(GPIO93, AF4)
+#define GPIO94_GSSP1_FRM	MFP_CFG(GPIO94, AF4)
+#define GPIO95_GSSP1_TXD	MFP_CFG(GPIO95, AF4)
+#define GPIO96_GSSP1_RXD	MFP_CFG(GPIO96, AF4)
+
+/* GSSP2 */
+#define GPIO47_GSSP2_CLK	MFP_CFG(GPIO47, AF4)
+#define GPIO48_GSSP2_FRM	MFP_CFG(GPIO48, AF4)
+#define GPIO49_GSSP2_RXD	MFP_CFG(GPIO49, AF4)
+#define GPIO50_GSSP2_TXD	MFP_CFG(GPIO50, AF4)
+
+#define GPIO69_GSSP2_CLK	MFP_CFG(GPIO69, AF4)
+#define GPIO70_GSSP2_FRM	MFP_CFG(GPIO70, AF4)
+#define GPIO71_GSSP2_RXD	MFP_CFG(GPIO71, AF4)
+#define GPIO72_GSSP2_TXD	MFP_CFG(GPIO72, AF4)
+
+#define GPIO84_GSSP2_RXD	MFP_CFG(GPIO84, AF2)
+#define GPIO85_GSSP2_CLK	MFP_CFG(GPIO85, AF2)
+#define GPIO86_GSSP2_SYSCLK	MFP_CFG(GPIO86, AF2)
+#define GPIO87_GSSP2_FRM	MFP_CFG(GPIO87, AF2)
+#define GPIO88_GSSP2_TXD	MFP_CFG(GPIO88, AF2)
+#define GPIO86_GSSP2_RXD	MFP_CFG(GPIO86, AF5)
+
+#define GPIO103_GSSP2_CLK	MFP_CFG(GPIO103, AF2)
+#define GPIO104_GSSP2_FRM	MFP_CFG(GPIO104, AF2)
+#define GPIO105_GSSP2_RXD	MFP_CFG(GPIO105, AF2)
+#define GPIO106_GSSP2_TXD	MFP_CFG(GPIO106, AF2)
+
+/* UART1 - FFUART */
+#define GPIO47_UART1_DSR_N	MFP_CFG(GPIO47, AF1)
+#define GPIO48_UART1_DTR_N	MFP_CFG(GPIO48, AF1)
+#define GPIO49_UART1_RI		MFP_CFG(GPIO49, AF1)
+#define GPIO50_UART1_DCD	MFP_CFG(GPIO50, AF1)
+#define GPIO51_UART1_CTS	MFP_CFG(GPIO51, AF1)
+#define GPIO52_UART1_RTS	MFP_CFG(GPIO52, AF1)
+#define GPIO53_UART1_RXD	MFP_CFG(GPIO53, AF1)
+#define GPIO54_UART1_TXD	MFP_CFG(GPIO54, AF1)
+
+#define GPIO63_UART1_TXD	MFP_CFG(GPIO63, AF2)
+#define GPIO64_UART1_RXD	MFP_CFG(GPIO64, AF2)
+#define GPIO65_UART1_DSR	MFP_CFG(GPIO65, AF2)
+#define GPIO66_UART1_DTR	MFP_CFG(GPIO66, AF2)
+#define GPIO67_UART1_RI		MFP_CFG(GPIO67, AF2)
+#define GPIO68_UART1_DCD	MFP_CFG(GPIO68, AF2)
+#define GPIO69_UART1_CTS	MFP_CFG(GPIO69, AF2)
+#define GPIO70_UART1_RTS	MFP_CFG(GPIO70, AF2)
+
+/* UART2 - BTUART */
+#define GPIO91_UART2_RXD	MFP_CFG(GPIO91, AF1)
+#define GPIO92_UART2_TXD	MFP_CFG(GPIO92, AF1)
+#define GPIO93_UART2_CTS	MFP_CFG(GPIO93, AF1)
+#define GPIO94_UART2_RTS	MFP_CFG(GPIO94, AF1)
+
+/* UART3 - STUART */
+#define GPIO43_UART3_RTS	MFP_CFG(GPIO43, AF3)
+#define GPIO44_UART3_CTS	MFP_CFG(GPIO44, AF3)
+#define GPIO45_UART3_RXD	MFP_CFG(GPIO45, AF3)
+#define GPIO46_UART3_TXD	MFP_CFG(GPIO46, AF3)
+
+#define GPIO75_UART3_RTS	MFP_CFG(GPIO75, AF5)
+#define GPIO76_UART3_CTS	MFP_CFG(GPIO76, AF5)
+#define GPIO77_UART3_TXD	MFP_CFG(GPIO77, AF5)
+#define GPIO78_UART3_RXD	MFP_CFG(GPIO78, AF5)
+
+/* DFI */
+#define DF_IO0_DF_IO0		MFP_CFG(DF_IO0, AF2)
+#define DF_IO1_DF_IO1		MFP_CFG(DF_IO1, AF2)
+#define DF_IO2_DF_IO2		MFP_CFG(DF_IO2, AF2)
+#define DF_IO3_DF_IO3		MFP_CFG(DF_IO3, AF2)
+#define DF_IO4_DF_IO4		MFP_CFG(DF_IO4, AF2)
+#define DF_IO5_DF_IO5		MFP_CFG(DF_IO5, AF2)
+#define DF_IO6_DF_IO6		MFP_CFG(DF_IO6, AF2)
+#define DF_IO7_DF_IO7		MFP_CFG(DF_IO7, AF2)
+#define DF_IO8_DF_IO8		MFP_CFG(DF_IO8, AF2)
+#define DF_IO9_DF_IO9		MFP_CFG(DF_IO9, AF2)
+#define DF_IO10_DF_IO10		MFP_CFG(DF_IO10, AF2)
+#define DF_IO11_DF_IO11		MFP_CFG(DF_IO11, AF2)
+#define DF_IO12_DF_IO12		MFP_CFG(DF_IO12, AF2)
+#define DF_IO13_DF_IO13		MFP_CFG(DF_IO13, AF2)
+#define DF_IO14_DF_IO14		MFP_CFG(DF_IO14, AF2)
+#define DF_IO15_DF_IO15		MFP_CFG(DF_IO15, AF2)
+#define DF_nADV1_ALE_DF_nADV1	MFP_CFG(DF_nADV1_ALE, AF2)
+#define DF_nADV2_ALE_DF_nADV2	MFP_CFG(DF_nADV2_ALE, AF2)
+#define DF_nCS0_DF_nCS0		MFP_CFG(DF_nCS0, AF2)
+#define DF_nCS1_DF_nCS1		MFP_CFG(DF_nCS1, AF2)
+#define DF_nRE_nOE_DF_nOE	MFP_CFG(DF_nRE_nOE, AF2)
+#define DF_nWE_DF_nWE		MFP_CFG(DF_nWE, AF2)
+
+/* DFI - NAND */
+#define DF_CLE_nOE_ND_CLE	MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH)
+#define DF_INT_RnB_ND_INT_RnB	MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW)
+#define DF_IO0_ND_IO0		MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW)
+#define DF_IO1_ND_IO1		MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW)
+#define DF_IO2_ND_IO2		MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW)
+#define DF_IO3_ND_IO3		MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW)
+#define DF_IO4_ND_IO4		MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW)
+#define DF_IO5_ND_IO5		MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW)
+#define DF_IO6_ND_IO6		MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW)
+#define DF_IO7_ND_IO7		MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW)
+#define DF_IO8_ND_IO8		MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW)
+#define DF_IO9_ND_IO9		MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW)
+#define DF_IO10_ND_IO10		MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW)
+#define DF_IO11_ND_IO11		MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW)
+#define DF_IO12_ND_IO12		MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW)
+#define DF_IO13_ND_IO13		MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW)
+#define DF_IO14_ND_IO14		MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW)
+#define DF_IO15_ND_IO15		MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW)
+#define DF_nADV1_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH)
+#define DF_nADV2_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH)
+#define	DF_nADV2_ALE_nCS3	MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH)
+#define DF_nCS0_ND_nCS0		MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH)
+#define DF_nCS1_ND_nCS1		MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH)
+#define DF_nRE_nOE_ND_nRE	MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH)
+#define DF_nWE_ND_nWE		MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH)
+
+/* PWM */
+#define GPIO41_PWM0		MFP_CFG_LPM(GPIO41, AF1, PULL_LOW)
+#define GPIO42_PWM1		MFP_CFG_LPM(GPIO42, AF1, PULL_LOW)
+#define GPIO43_PWM3		MFP_CFG_LPM(GPIO43, AF1, PULL_LOW)
+#define GPIO20_PWM0		MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
+#define GPIO21_PWM2		MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
+#define GPIO22_PWM3		MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
+
+/* CIR */
+#define GPIO46_CIR_OUT		MFP_CFG(GPIO46, AF1)
+#define GPIO77_CIR_OUT		MFP_CFG(GPIO77, AF3)
+
+/* USB P2 */
+#define GPIO0_USB_P2_7		MFP_CFG(GPIO0, AF3)
+#define GPIO15_USB_P2_7		MFP_CFG(GPIO15, AF5)
+#define GPIO16_USB_P2_7		MFP_CFG(GPIO16, AF2)
+#define GPIO48_USB_P2_7		MFP_CFG(GPIO48, AF7)
+#define GPIO49_USB_P2_7		MFP_CFG(GPIO49, AF6)
+#define DF_IO9_USB_P2_7		MFP_CFG(DF_IO9, AF3)
+
+#define GPIO48_USB_P2_8		MFP_CFG(GPIO48, AF2)
+#define GPIO50_USB_P2_7		MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT)
+#define GPIO51_USB_P2_5		MFP_CFG(GPIO51, AF2)
+#define GPIO47_USB_P2_4		MFP_CFG(GPIO47, AF2)
+#define GPIO53_USB_P2_3		MFP_CFG(GPIO53, AF2)
+#define GPIO54_USB_P2_6		MFP_CFG(GPIO54, AF2)
+#define GPIO49_USB_P2_2		MFP_CFG(GPIO49, AF2)
+#define GPIO52_USB_P2_1		MFP_CFG(GPIO52, AF2)
+
+#define GPIO63_USB_P2_8		MFP_CFG(GPIO63, AF3)
+#define GPIO64_USB_P2_7		MFP_CFG(GPIO64, AF3)
+#define GPIO65_USB_P2_6		MFP_CFG(GPIO65, AF3)
+#define GPIO66_USG_P2_5		MFP_CFG(GPIO66, AF3)
+#define GPIO67_USB_P2_4		MFP_CFG(GPIO67, AF3)
+#define GPIO68_USB_P2_3		MFP_CFG(GPIO68, AF3)
+#define GPIO69_USB_P2_2		MFP_CFG(GPIO69, AF3)
+#define GPIO70_USB_P2_1		MFP_CFG(GPIO70, AF3)
+
+/* ULPI */
+#define GPIO31_USB_ULPI_D0	MFP_CFG(GPIO31, AF4)
+#define GPIO30_USB_ULPI_D1	MFP_CFG(GPIO30, AF7)
+#define GPIO33_USB_ULPI_D2	MFP_CFG(GPIO33, AF5)
+#define GPIO34_USB_ULPI_D3	MFP_CFG(GPIO34, AF5)
+#define GPIO35_USB_ULPI_D4	MFP_CFG(GPIO35, AF5)
+#define GPIO36_USB_ULPI_D5	MFP_CFG(GPIO36, AF5)
+#define GPIO41_USB_ULPI_D6	MFP_CFG(GPIO41, AF5)
+#define GPIO42_USB_ULPI_D7	MFP_CFG(GPIO42, AF5)
+#define GPIO37_USB_ULPI_DIR	MFP_CFG(GPIO37, AF4)
+#define GPIO38_USB_ULPI_CLK	MFP_CFG(GPIO38, AF4)
+#define GPIO39_USB_ULPI_STP	MFP_CFG(GPIO39, AF4)
+#define GPIO40_USB_ULPI_NXT	MFP_CFG(GPIO40, AF4)
+
+#define GPIO3_CLK26MOUTDMD	MFP_CFG(GPIO3, AF3)
+#define GPIO40_CLK26MOUTDMD	MFP_CFG(GPIO40, AF7)
+#define GPIO94_CLK26MOUTDMD	MFP_CFG(GPIO94, AF5)
+#define GPIO104_CLK26MOUTDMD	MFP_CFG(GPIO104, AF4)
+#define DF_ADDR1_CLK26MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
+#define DF_ADDR3_CLK26MOUTDMD	MFP_CFG(DF_ADDR3, AF3)
+
+#define GPIO14_CLK26MOUT	MFP_CFG(GPIO14, AF5)
+#define GPIO38_CLK26MOUT	MFP_CFG(GPIO38, AF7)
+#define GPIO92_CLK26MOUT	MFP_CFG(GPIO92, AF5)
+#define GPIO105_CLK26MOUT	MFP_CFG(GPIO105, AF4)
+
+#define GPIO2_CLK13MOUTDMD	MFP_CFG(GPIO2, AF3)
+#define GPIO39_CLK13MOUTDMD	MFP_CFG(GPIO39, AF7)
+#define GPIO50_CLK13MOUTDMD	MFP_CFG(GPIO50, AF3)
+#define GPIO93_CLK13MOUTDMD	MFP_CFG(GPIO93, AF5)
+#define GPIO103_CLK13MOUTDMD	MFP_CFG(GPIO103, AF4)
+#define DF_ADDR2_CLK13MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
+
+/* 1 wire */
+#define GPIO95_OW_DQ_IN		MFP_CFG(GPIO95, AF5)
+
+#endif /* __ASM_ARCH_MFP_PXA9xx_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
new file mode 100644
index 000000000000..8769567b389b
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -0,0 +1,319 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp.h
+ *
+ * Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.miao@marvell.com>
+ *            initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_H
+#define __ASM_ARCH_MFP_H
+
+#define mfp_to_gpio(m)	((m) % 128)
+
+/* list of all the configurable MFP pins */
+enum {
+	MFP_PIN_INVALID = -1,
+
+	MFP_PIN_GPIO0 = 0,
+	MFP_PIN_GPIO1,
+	MFP_PIN_GPIO2,
+	MFP_PIN_GPIO3,
+	MFP_PIN_GPIO4,
+	MFP_PIN_GPIO5,
+	MFP_PIN_GPIO6,
+	MFP_PIN_GPIO7,
+	MFP_PIN_GPIO8,
+	MFP_PIN_GPIO9,
+	MFP_PIN_GPIO10,
+	MFP_PIN_GPIO11,
+	MFP_PIN_GPIO12,
+	MFP_PIN_GPIO13,
+	MFP_PIN_GPIO14,
+	MFP_PIN_GPIO15,
+	MFP_PIN_GPIO16,
+	MFP_PIN_GPIO17,
+	MFP_PIN_GPIO18,
+	MFP_PIN_GPIO19,
+	MFP_PIN_GPIO20,
+	MFP_PIN_GPIO21,
+	MFP_PIN_GPIO22,
+	MFP_PIN_GPIO23,
+	MFP_PIN_GPIO24,
+	MFP_PIN_GPIO25,
+	MFP_PIN_GPIO26,
+	MFP_PIN_GPIO27,
+	MFP_PIN_GPIO28,
+	MFP_PIN_GPIO29,
+	MFP_PIN_GPIO30,
+	MFP_PIN_GPIO31,
+	MFP_PIN_GPIO32,
+	MFP_PIN_GPIO33,
+	MFP_PIN_GPIO34,
+	MFP_PIN_GPIO35,
+	MFP_PIN_GPIO36,
+	MFP_PIN_GPIO37,
+	MFP_PIN_GPIO38,
+	MFP_PIN_GPIO39,
+	MFP_PIN_GPIO40,
+	MFP_PIN_GPIO41,
+	MFP_PIN_GPIO42,
+	MFP_PIN_GPIO43,
+	MFP_PIN_GPIO44,
+	MFP_PIN_GPIO45,
+	MFP_PIN_GPIO46,
+	MFP_PIN_GPIO47,
+	MFP_PIN_GPIO48,
+	MFP_PIN_GPIO49,
+	MFP_PIN_GPIO50,
+	MFP_PIN_GPIO51,
+	MFP_PIN_GPIO52,
+	MFP_PIN_GPIO53,
+	MFP_PIN_GPIO54,
+	MFP_PIN_GPIO55,
+	MFP_PIN_GPIO56,
+	MFP_PIN_GPIO57,
+	MFP_PIN_GPIO58,
+	MFP_PIN_GPIO59,
+	MFP_PIN_GPIO60,
+	MFP_PIN_GPIO61,
+	MFP_PIN_GPIO62,
+	MFP_PIN_GPIO63,
+	MFP_PIN_GPIO64,
+	MFP_PIN_GPIO65,
+	MFP_PIN_GPIO66,
+	MFP_PIN_GPIO67,
+	MFP_PIN_GPIO68,
+	MFP_PIN_GPIO69,
+	MFP_PIN_GPIO70,
+	MFP_PIN_GPIO71,
+	MFP_PIN_GPIO72,
+	MFP_PIN_GPIO73,
+	MFP_PIN_GPIO74,
+	MFP_PIN_GPIO75,
+	MFP_PIN_GPIO76,
+	MFP_PIN_GPIO77,
+	MFP_PIN_GPIO78,
+	MFP_PIN_GPIO79,
+	MFP_PIN_GPIO80,
+	MFP_PIN_GPIO81,
+	MFP_PIN_GPIO82,
+	MFP_PIN_GPIO83,
+	MFP_PIN_GPIO84,
+	MFP_PIN_GPIO85,
+	MFP_PIN_GPIO86,
+	MFP_PIN_GPIO87,
+	MFP_PIN_GPIO88,
+	MFP_PIN_GPIO89,
+	MFP_PIN_GPIO90,
+	MFP_PIN_GPIO91,
+	MFP_PIN_GPIO92,
+	MFP_PIN_GPIO93,
+	MFP_PIN_GPIO94,
+	MFP_PIN_GPIO95,
+	MFP_PIN_GPIO96,
+	MFP_PIN_GPIO97,
+	MFP_PIN_GPIO98,
+	MFP_PIN_GPIO99,
+	MFP_PIN_GPIO100,
+	MFP_PIN_GPIO101,
+	MFP_PIN_GPIO102,
+	MFP_PIN_GPIO103,
+	MFP_PIN_GPIO104,
+	MFP_PIN_GPIO105,
+	MFP_PIN_GPIO106,
+	MFP_PIN_GPIO107,
+	MFP_PIN_GPIO108,
+	MFP_PIN_GPIO109,
+	MFP_PIN_GPIO110,
+	MFP_PIN_GPIO111,
+	MFP_PIN_GPIO112,
+	MFP_PIN_GPIO113,
+	MFP_PIN_GPIO114,
+	MFP_PIN_GPIO115,
+	MFP_PIN_GPIO116,
+	MFP_PIN_GPIO117,
+	MFP_PIN_GPIO118,
+	MFP_PIN_GPIO119,
+	MFP_PIN_GPIO120,
+	MFP_PIN_GPIO121,
+	MFP_PIN_GPIO122,
+	MFP_PIN_GPIO123,
+	MFP_PIN_GPIO124,
+	MFP_PIN_GPIO125,
+	MFP_PIN_GPIO126,
+	MFP_PIN_GPIO127,
+	MFP_PIN_GPIO0_2,
+	MFP_PIN_GPIO1_2,
+	MFP_PIN_GPIO2_2,
+	MFP_PIN_GPIO3_2,
+	MFP_PIN_GPIO4_2,
+	MFP_PIN_GPIO5_2,
+	MFP_PIN_GPIO6_2,
+	MFP_PIN_GPIO7_2,
+	MFP_PIN_GPIO8_2,
+	MFP_PIN_GPIO9_2,
+	MFP_PIN_GPIO10_2,
+	MFP_PIN_GPIO11_2,
+	MFP_PIN_GPIO12_2,
+	MFP_PIN_GPIO13_2,
+	MFP_PIN_GPIO14_2,
+	MFP_PIN_GPIO15_2,
+	MFP_PIN_GPIO16_2,
+	MFP_PIN_GPIO17_2,
+
+	MFP_PIN_ULPI_STP,
+	MFP_PIN_ULPI_NXT,
+	MFP_PIN_ULPI_DIR,
+
+	MFP_PIN_nXCVREN,
+	MFP_PIN_DF_CLE_nOE,
+	MFP_PIN_DF_nADV1_ALE,
+	MFP_PIN_DF_SCLK_E,
+	MFP_PIN_DF_SCLK_S,
+	MFP_PIN_nBE0,
+	MFP_PIN_nBE1,
+	MFP_PIN_DF_nADV2_ALE,
+	MFP_PIN_DF_INT_RnB,
+	MFP_PIN_DF_nCS0,
+	MFP_PIN_DF_nCS1,
+	MFP_PIN_nLUA,
+	MFP_PIN_nLLA,
+	MFP_PIN_DF_nWE,
+	MFP_PIN_DF_ALE_nWE,
+	MFP_PIN_DF_nRE_nOE,
+	MFP_PIN_DF_ADDR0,
+	MFP_PIN_DF_ADDR1,
+	MFP_PIN_DF_ADDR2,
+	MFP_PIN_DF_ADDR3,
+	MFP_PIN_DF_IO0,
+	MFP_PIN_DF_IO1,
+	MFP_PIN_DF_IO2,
+	MFP_PIN_DF_IO3,
+	MFP_PIN_DF_IO4,
+	MFP_PIN_DF_IO5,
+	MFP_PIN_DF_IO6,
+	MFP_PIN_DF_IO7,
+	MFP_PIN_DF_IO8,
+	MFP_PIN_DF_IO9,
+	MFP_PIN_DF_IO10,
+	MFP_PIN_DF_IO11,
+	MFP_PIN_DF_IO12,
+	MFP_PIN_DF_IO13,
+	MFP_PIN_DF_IO14,
+	MFP_PIN_DF_IO15,
+
+	/* additional pins on PXA930 */
+	MFP_PIN_GSIM_UIO,
+	MFP_PIN_GSIM_UCLK,
+	MFP_PIN_GSIM_UDET,
+	MFP_PIN_GSIM_nURST,
+	MFP_PIN_PMIC_INT,
+	MFP_PIN_RDY,
+
+	MFP_PIN_MAX,
+};
+
+/*
+ * a possible MFP configuration is represented by a 32-bit integer
+ *
+ * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
+ * bit 10..12 - Alternate Function Selection
+ * bit 13..15 - Drive Strength
+ * bit 16..18 - Low Power Mode State
+ * bit 19..20 - Low Power Mode Edge Detection
+ * bit 21..22 - Run Mode Pull State
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * MFP_CFG_DEFAULT - default MFP configuration value, with
+ * 		  alternate function = 0,
+ * 		  drive strength = fast 3mA (MFP_DS03X)
+ * 		  low power mode = default
+ * 		  edge detection = none
+ *
+ * MFP_CFG	- default MFPR value with alternate function
+ * MFP_CFG_DRV	- default MFPR value with alternate function and
+ * 		  pin drive strength
+ * MFP_CFG_LPM	- default MFPR value with alternate function and
+ * 		  low power mode
+ * MFP_CFG_X	- default MFPR value with alternate function,
+ * 		  pin drive strength and low power mode
+ */
+
+typedef unsigned long mfp_cfg_t;
+
+#define MFP_PIN(x)		((x) & 0x3ff)
+
+#define MFP_AF0			(0x0 << 10)
+#define MFP_AF1			(0x1 << 10)
+#define MFP_AF2			(0x2 << 10)
+#define MFP_AF3			(0x3 << 10)
+#define MFP_AF4			(0x4 << 10)
+#define MFP_AF5			(0x5 << 10)
+#define MFP_AF6			(0x6 << 10)
+#define MFP_AF7			(0x7 << 10)
+#define MFP_AF_MASK		(0x7 << 10)
+#define MFP_AF(x)		(((x) >> 10) & 0x7)
+
+#define MFP_DS01X		(0x0 << 13)
+#define MFP_DS02X		(0x1 << 13)
+#define MFP_DS03X		(0x2 << 13)
+#define MFP_DS04X		(0x3 << 13)
+#define MFP_DS06X		(0x4 << 13)
+#define MFP_DS08X		(0x5 << 13)
+#define MFP_DS10X		(0x6 << 13)
+#define MFP_DS13X		(0x7 << 13)
+#define MFP_DS_MASK		(0x7 << 13)
+#define MFP_DS(x)		(((x) >> 13) & 0x7)
+
+#define MFP_LPM_INPUT		(0x0 << 16)
+#define MFP_LPM_DRIVE_LOW	(0x1 << 16)
+#define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
+#define MFP_LPM_PULL_LOW	(0x3 << 16)
+#define MFP_LPM_PULL_HIGH	(0x4 << 16)
+#define MFP_LPM_FLOAT		(0x5 << 16)
+#define MFP_LPM_STATE_MASK	(0x7 << 16)
+#define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
+
+#define MFP_LPM_EDGE_NONE	(0x0 << 19)
+#define MFP_LPM_EDGE_RISE	(0x1 << 19)
+#define MFP_LPM_EDGE_FALL	(0x2 << 19)
+#define MFP_LPM_EDGE_BOTH	(0x3 << 19)
+#define MFP_LPM_EDGE_MASK	(0x3 << 19)
+#define MFP_LPM_EDGE(x)		(((x) >> 19) & 0x3)
+
+#define MFP_PULL_NONE		(0x0 << 21)
+#define MFP_PULL_LOW		(0x1 << 21)
+#define MFP_PULL_HIGH		(0x2 << 21)
+#define MFP_PULL_BOTH		(0x3 << 21)
+#define MFP_PULL_MASK		(0x3 << 21)
+#define MFP_PULL(x)		(((x) >> 21) & 0x3)
+
+#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_INPUT |\
+				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
+
+#define MFP_CFG(pin, af)		\
+	((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
+
+#define MFP_CFG_DRV(pin, af, drv)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
+
+#define MFP_CFG_LPM(pin, af, lpm)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
+
+#define MFP_CFG_X(pin, af, drv, lpm)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+
+#endif /* __ASM_ARCH_MFP_H */
diff --git a/arch/arm/mach-pxa/include/mach/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h
new file mode 100644
index 000000000000..6d1304c9270f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mmc.h
@@ -0,0 +1,23 @@
+#ifndef ASMARM_ARCH_MMC_H
+#define ASMARM_ARCH_MMC_H
+
+#include <linux/mmc/host.h>
+#include <linux/interrupt.h>
+
+struct device;
+struct mmc_host;
+
+struct pxamci_platform_data {
+	unsigned int ocr_mask;			/* available voltages */
+	unsigned long detect_delay;		/* delay in jiffies before detecting cards after interrupt */
+	int (*init)(struct device *, irq_handler_t , void *);
+	int (*get_ro)(struct device *);
+	void (*setpower)(struct device *, unsigned int);
+	void (*exit)(struct device *, void *);
+};
+
+extern void pxa_set_mci_info(struct pxamci_platform_data *info);
+extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info);
+extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
new file mode 100644
index 000000000000..351f32f13ce4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -0,0 +1,37 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ * 
+ * Author:	Nicolas Pitre
+ * Created:	Nov 2, 2004
+ * Copyright:	(C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
+ */
+
+#ifndef __ARCH_PXA_MTD_XIP_H__
+#define __ARCH_PXA_MTD_XIP_H__
+
+#include <mach/pxa-regs.h>
+
+#define xip_irqpending()	(ICIP & ICMR)
+
+/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
+#define xip_currtime()		(OSCR)
+#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period.  This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#define xip_cpu_idle()  asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
+
+#endif /* __ARCH_PXA_MTD_XIP_H__ */
diff --git a/arch/arm/mach-pxa/include/mach/ohci.h b/arch/arm/mach-pxa/include/mach/ohci.h
new file mode 100644
index 000000000000..e848a47128cd
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/ohci.h
@@ -0,0 +1,20 @@
+#ifndef ASMARM_ARCH_OHCI_H
+#define ASMARM_ARCH_OHCI_H
+
+struct device;
+
+struct pxaohci_platform_data {
+	int (*init)(struct device *);
+	void (*exit)(struct device *);
+
+	int port_mode;
+#define PMM_NPS_MODE           1
+#define PMM_GLOBAL_MODE        2
+#define PMM_PERPORT_MODE       3
+
+	int power_budget;
+};
+
+extern void pxa_set_ohci_info(struct pxaohci_platform_data *info);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
new file mode 100644
index 000000000000..1e8bccbda510
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -0,0 +1,106 @@
+/*
+ * GPIOs and interrupts for Palm T|X Handheld Computer
+ *
+ * Based on palmld-gpio.h by Alex Osborne
+ *
+ * Authors:	Marek Vasut <marek.vasut@gmail.com>
+ *		Cristiano P. <cristianop@users.sourceforge.net>
+ *		Jan Herman <2hp@seznam.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTX_H_
+#define _INCLUDE_PALMTX_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTX_GPIO_RESET		1
+
+#define GPIO_NR_PALMTX_POWER_DETECT		12 /* 90 */
+#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N		10
+#define GPIO_NR_PALMTX_EARPHONE_DETECT		107
+
+/* SD/MMC */
+#define GPIO_NR_PALMTX_SD_DETECT_N		14
+#define GPIO_NR_PALMTX_SD_POWER			114 /* probably */
+#define GPIO_NR_PALMTX_SD_READONLY		115 /* probably */
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMTX_WM9712_IRQ		27
+
+/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMTX_IR_DISABLE		40
+
+/* USB */
+#define GPIO_NR_PALMTX_USB_DETECT_N		13
+#define GPIO_NR_PALMTX_USB_POWER		95
+#define GPIO_NR_PALMTX_USB_PULLUP		93
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTX_BL_POWER			84
+#define GPIO_NR_PALMTX_LCD_POWER		96
+
+/* LCD BORDER */
+#define GPIO_NR_PALMTX_BORDER_SWITCH		98
+#define GPIO_NR_PALMTX_BORDER_SELECT		22
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMTX_BT_POWER			17
+#define GPIO_NR_PALMTX_BT_RESET			83
+
+/* PCMCIA (WiFi) */
+#define GPIO_NR_PALMTX_PCMCIA_POWER1		94
+#define GPIO_NR_PALMTX_PCMCIA_POWER2		108
+#define GPIO_NR_PALMTX_PCMCIA_RESET		79
+#define GPIO_NR_PALMTX_PCMCIA_READY		116
+
+/* NAND Flash ... this GPIO may be incorrect! */
+#define GPIO_NR_PALMTX_NAND_BUFFER_DIR		79
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMTX_SD_DETECT_N	IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N)
+#define IRQ_GPIO_PALMTX_WM9712_IRQ	IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ)
+#define IRQ_GPIO_PALMTX_USB_DETECT	IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT)
+#define IRQ_GPIO_PALMTX_GPIO_RESET	IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET)
+
+/** HERE ARE INIT VALUES **/
+
+/* Various addresses  */
+#define PALMTX_PCMCIA_PHYS	0x28000000
+#define PALMTX_PCMCIA_VIRT	0xf0000000
+#define PALMTX_PCMCIA_SIZE	0x100000
+
+#define PALMTX_PHYS_RAM_START	0xa0000000
+#define PALMTX_PHYS_IO_START	0x40000000
+
+#define PALMTX_PHYS_FLASH_START	PXA_CS0_PHYS	/* ChipSelect 0 */
+#define PALMTX_PHYS_NAND_START	PXA_CS1_PHYS	/* ChipSelect 1 */
+
+/* TOUCHSCREEN */
+#define AC97_LINK_FRAME			21
+
+
+/* BATTERY */
+#define PALMTX_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
+#define PALMTX_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
+#define PALMTX_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMTX_BAT_MIN_CURRENT		0	/* unknown */
+#define PALMTX_BAT_MAX_CHARGE		1	/* unknown */
+#define PALMTX_BAT_MIN_CHARGE		1	/* unknown */
+#define PALMTX_MAX_LIFE_MINS		360	/* on-life in minutes */
+
+#define PALMTX_BAT_MEASURE_DELAY	(HZ * 1)
+
+/* BACKLIGHT */
+#define PALMTX_MAX_INTENSITY		0xFE
+#define PALMTX_DEFAULT_INTENSITY	0x7E
+#define PALMTX_LIMIT_MASK		0x7F
+#define PALMTX_PRESCALER		0x3F
+#define PALMTX_PERIOD_NS		3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
new file mode 100644
index 000000000000..4dcd2e8baa61
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pcm027.h
+ *
+ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Definitions of CPU card resources only
+ */
+
+/* I2C RTC */
+#define PCM027_RTC_IRQ_GPIO	0
+#define PCM027_RTC_IRQ		IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
+#define PCM027_RTC_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+#define ADR_PCM027_RTC		0x51	/* I2C address */
+
+/* I2C EEPROM */
+#define ADR_PCM027_EEPROM	0x54	/* I2C address */
+
+/* Ethernet chip (SMSC91C111) */
+#define PCM027_ETH_IRQ_GPIO	52
+#define PCM027_ETH_IRQ		IRQ_GPIO(PCM027_ETH_IRQ_GPIO)
+#define PCM027_ETH_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+#define PCM027_ETH_PHYS		PXA_CS5_PHYS
+#define PCM027_ETH_SIZE		(1*1024*1024)
+
+/* CAN controller SJA1000 (unsupported yet) */
+#define PCM027_CAN_IRQ_GPIO	114
+#define PCM027_CAN_IRQ		IRQ_GPIO(PCM027_CAN_IRQ_GPIO)
+#define PCM027_CAN_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+#define PCM027_CAN_PHYS		0x22000000
+#define PCM027_CAN_SIZE		0x100
+
+/* SPI GPIO expander (unsupported yet) */
+#define PCM027_EGPIO_IRQ_GPIO	27
+#define PCM027_EGPIO_IRQ	IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO)
+#define PCM027_EGPIO_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+#define PCM027_EGPIO_CS		24
+/*
+ * TODO: Switch this pin from dedicated usage to GPIO if
+ * more than the MAX7301 device is connected to this SPI bus
+ */
+#define PCM027_EGPIO_CS_MODE	GPIO24_SFRM_MD
+
+/* Flash memory */
+#define PCM027_FLASH_PHYS	0x00000000
+#define PCM027_FLASH_SIZE	0x02000000
+
+/* onboard LEDs connected to GPIO */
+#define PCM027_LED_CPU		90
+#define PCM027_LED_HEARD_BEAT	91
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own basebaord init function and call it from
+ * inside pcm027_init(). This example here is for the developmen board.
+ * Refer pcm990-baseboard.c
+ */
+extern void pcm990_baseboard_init(void);
diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
new file mode 100644
index 000000000000..8a4383b776d7
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -0,0 +1,275 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+ *
+ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <mach/pcm027.h>
+
+/*
+ * definitions relevant only when the PCM-990
+ * development base board is in use
+ */
+
+/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
+#define PCM990_CTRL_INT_IRQ_GPIO	9
+#define PCM990_CTRL_INT_IRQ		IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
+#define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+#define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
+#define PCM990_CTRL_BASE		0xea000000
+#define PCM990_CTRL_SIZE		(1*1024*1024)
+
+#define PCM990_CTRL_PWR_IRQ_GPIO	14
+#define PCM990_CTRL_PWR_IRQ		IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
+#define PCM990_CTRL_PWR_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+
+/* visible CPLD (U7) registers */
+#define PCM990_CTRL_REG0	0x0000	/* RESET REGISTER */
+#define PCM990_CTRL_SYSRES	0x0001	/* System RESET REGISTER */
+#define PCM990_CTRL_RESOUT	0x0002	/* RESETOUT Enable REGISTER */
+#define PCM990_CTRL_RESGPIO	0x0004	/* RESETGPIO Enable REGISTER */
+
+#define PCM990_CTRL_REG1	0x0002	/* Power REGISTER */
+#define PCM990_CTRL_5VOFF	0x0001	/* Disable  5V Regulators */
+#define PCM990_CTRL_CANPWR	0x0004	/* Enable CANPWR ADUM */
+#define PCM990_CTRL_PM_5V	0x0008	/* Read 5V OK */
+
+#define PCM990_CTRL_REG2	0x0004	/* LED REGISTER */
+#define PCM990_CTRL_LEDPWR	0x0001	/* POWER LED enable */
+#define PCM990_CTRL_LEDBAS	0x0002	/* BASIS LED enable */
+#define PCM990_CTRL_LEDUSR	0x0004	/* USER LED enable */
+
+#define PCM990_CTRL_REG3	0x0006	/* LCD CTRL REGISTER 3 */
+#define PCM990_CTRL_LCDPWR	0x0001	/* RW LCD Power on */
+#define PCM990_CTRL_LCDON	0x0002	/* RW LCD Latch on */
+#define PCM990_CTRL_LCDPOS1	0x0004	/* RW POS 1 */
+#define PCM990_CTRL_LCDPOS2	0x0008	/* RW POS 2 */
+
+#define PCM990_CTRL_REG4	0x0008	/* MMC1 CTRL REGISTER 4 */
+#define PCM990_CTRL_MMC1PWR	0x0001 /* RW MMC1 Power on */
+
+#define PCM990_CTRL_REG5	0x000A	/* MMC2 CTRL REGISTER 5 */
+#define PCM990_CTRL_MMC2PWR	0x0001	/* RW MMC2 Power on */
+#define PCM990_CTRL_MMC2LED	0x0002	/* RW MMC2 LED */
+#define PCM990_CTRL_MMC2DE	0x0004	/* R MMC2 Card detect */
+#define PCM990_CTRL_MMC2WP	0x0008	/* R MMC2 Card write protect */
+
+#define PCM990_CTRL_REG6	0x000C	/* Interrupt Clear REGISTER */
+#define PCM990_CTRL_INTC0	0x0001	/* Clear Reg BT Detect */
+#define PCM990_CTRL_INTC1	0x0002	/* Clear Reg FR RI */
+#define PCM990_CTRL_INTC2	0x0004	/* Clear Reg MMC1 Detect */
+#define PCM990_CTRL_INTC3	0x0008	/* Clear Reg PM_5V off */
+
+#define PCM990_CTRL_REG7	0x000E	/* Interrupt Enable REGISTER */
+#define PCM990_CTRL_ENAINT0	0x0001	/* Enable Int BT Detect */
+#define PCM990_CTRL_ENAINT1	0x0002	/* Enable Int FR RI */
+#define PCM990_CTRL_ENAINT2	0x0004	/* Enable Int MMC1 Detect */
+#define PCM990_CTRL_ENAINT3	0x0008	/* Enable Int PM_5V off */
+
+#define PCM990_CTRL_REG8	0x0014	/* Uart REGISTER */
+#define PCM990_CTRL_FFSD	0x0001	/* BT Uart Enable */
+#define PCM990_CTRL_BTSD	0x0002	/* FF Uart Enable */
+#define PCM990_CTRL_FFRI	0x0004	/* FF Uart RI detect */
+#define PCM990_CTRL_BTRX	0x0008	/* BT Uart Rx detect */
+
+#define PCM990_CTRL_REG9	0x0010	/* AC97 Flash REGISTER */
+#define PCM990_CTRL_FLWP	0x0001	/* pC Flash Write Protect */
+#define PCM990_CTRL_FLDIS	0x0002	/* pC Flash Disable */
+#define PCM990_CTRL_AC97ENA	0x0004	/* Enable AC97 Expansion */
+
+#define PCM990_CTRL_REG10	0x0012	/* GPS-REGISTER */
+#define PCM990_CTRL_GPSPWR	0x0004	/* GPS-Modul Power on */
+#define PCM990_CTRL_GPSENA	0x0008	/* GPS-Modul Enable */
+
+#define PCM990_CTRL_REG11	0x0014	/* Accu REGISTER */
+#define PCM990_CTRL_ACENA	0x0001	/* Charge Enable */
+#define PCM990_CTRL_ACSEL	0x0002	/* Charge Akku -> DC Enable */
+#define PCM990_CTRL_ACPRES	0x0004	/* DC Present */
+#define PCM990_CTRL_ACALARM	0x0008	/* Error Akku */
+
+#define PCM990_CTRL_P2V(x)	((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE)
+#define PCM990_CTRL_V2P(x)	((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __PCM990_CTRL_REG(x) \
+		(*((volatile unsigned char *)PCM990_CTRL_P2V(x)))
+#else
+#  define __PCM990_CTRL_REG(x)	PCM990_CTRL_P2V(x)
+#endif
+
+#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
+#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
+#define PCM990_CTRL0	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0)
+#define PCM990_CTRL1	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1)
+#define PCM990_CTRL2	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2)
+#define PCM990_CTRL3	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3)
+#define PCM990_CTRL4	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4)
+#define PCM990_CTRL5	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5)
+#define PCM990_CTRL6	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
+#define PCM990_CTRL7	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
+#define PCM990_CTRL8	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8)
+#define PCM990_CTRL9	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9)
+#define PCM990_CTRL10	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10)
+#define PCM990_CTRL11	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11)
+
+
+/*
+ * IDE
+ */
+#define PCM990_IDE_IRQ_GPIO	13
+#define PCM990_IDE_IRQ		IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
+#define PCM990_IDE_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+#define PCM990_IDE_PLD_PHYS	0x20000000	/* 16 bit wide */
+#define PCM990_IDE_PLD_BASE	0xee000000
+#define PCM990_IDE_PLD_SIZE	(1*1024*1024)
+
+/* visible CPLD (U6) registers */
+#define PCM990_IDE_PLD_REG0	0x1000	/* OFFSET IDE REGISTER 0 */
+#define PCM990_IDE_PM5V		0x0004	/* R System VCC_5V */
+#define PCM990_IDE_STBY		0x0008	/* R System StandBy */
+
+#define PCM990_IDE_PLD_REG1	0x1002	/* OFFSET IDE REGISTER 1 */
+#define PCM990_IDE_IDEMODE	0x0001	/* R TrueIDE Mode */
+#define PCM990_IDE_DMAENA	0x0004	/* RW DMA Enable */
+#define PCM990_IDE_DMA1_0	0x0008	/* RW 1=DREQ1 0=DREQ0 */
+
+#define PCM990_IDE_PLD_REG2	0x1004	/* OFFSET IDE REGISTER 2 */
+#define PCM990_IDE_RESENA	0x0001	/* RW IDE Reset Bit enable */
+#define PCM990_IDE_RES		0x0002	/* RW IDE Reset Bit */
+#define PCM990_IDE_RDY		0x0008	/* RDY */
+
+#define PCM990_IDE_PLD_REG3	0x1006	/* OFFSET IDE REGISTER 3 */
+#define PCM990_IDE_IDEOE	0x0001	/* RW Latch on Databus */
+#define PCM990_IDE_IDEON	0x0002	/* RW Latch on Control Address */
+#define PCM990_IDE_IDEIN	0x0004	/* RW Latch on Interrupt usw. */
+
+#define PCM990_IDE_PLD_REG4	0x1008	/* OFFSET IDE REGISTER 4 */
+#define PCM990_IDE_PWRENA	0x0001	/* RW IDE Power enable */
+#define PCM990_IDE_5V		0x0002	/* R IDE Power 5V */
+#define PCM990_IDE_PWG		0x0008	/* R IDE Power is on */
+
+#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
+#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
+
+#ifndef __ASSEMBLY__
+# define  __PCM990_IDE_PLD_REG(x) \
+	(*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x)))
+#else
+# define  __PCM990_IDE_PLD_REG(x)	PCM990_IDE_PLD_P2V(x)
+#endif
+
+#define PCM990_IDE0 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0)
+#define PCM990_IDE1 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1)
+#define PCM990_IDE2 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2)
+#define PCM990_IDE3 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3)
+#define PCM990_IDE4 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4)
+
+/*
+ * Compact Flash
+ */
+#define PCM990_CF_IRQ_GPIO	11
+#define PCM990_CF_IRQ		IRQ_GPIO(PCM990_CF_IRQ_GPIO)
+#define PCM990_CF_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+
+#define PCM990_CF_CD_GPIO	12
+#define PCM990_CF_CD		IRQ_GPIO(PCM990_CF_CD_GPIO)
+#define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
+
+#define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
+#define PCM990_CF_PLD_BASE	0xef000000
+#define PCM990_CF_PLD_SIZE	(1*1024*1024)
+#define PCM990_CF_PLD_P2V(x)	((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE)
+#define PCM990_CF_PLD_V2P(x)	((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS)
+
+/* visible CPLD (U6) registers */
+#define PCM990_CF_PLD_REG0	0x1000	/* OFFSET CF REGISTER 0 */
+#define PCM990_CF_REG0_LED	0x0001	/* RW LED on */
+#define PCM990_CF_REG0_BLK	0x0002	/* RW LED flash when access */
+#define PCM990_CF_REG0_PM5V	0x0004	/* R System VCC_5V enable */
+#define PCM990_CF_REG0_STBY	0x0008	/* R System StandBy */
+
+#define PCM990_CF_PLD_REG1	0x1002	/* OFFSET CF REGISTER 1 */
+#define PCM990_CF_REG1_IDEMODE	0x0001	/* RW CF card run as TrueIDE */
+#define PCM990_CF_REG1_CF0	0x0002	/* RW CF card at ADDR 0x28000000 */
+
+#define PCM990_CF_PLD_REG2	0x1004	/* OFFSET CF REGISTER 2 */
+#define PCM990_CF_REG2_RES	0x0002	/* RW CF RESET BIT */
+#define PCM990_CF_REG2_RDYENA	0x0004	/* RW Enable CF_RDY */
+#define PCM990_CF_REG2_RDY	0x0008	/* R CF_RDY auf PWAIT */
+
+#define PCM990_CF_PLD_REG3	0x1006	/* OFFSET CF REGISTER 3 */
+#define PCM990_CF_REG3_CFOE	0x0001	/* RW Latch on Databus */
+#define PCM990_CF_REG3_CFON	0x0002	/* RW Latch on Control Address */
+#define PCM990_CF_REG3_CFIN	0x0004	/* RW Latch on Interrupt usw. */
+#define PCM990_CF_REG3_CFCD	0x0008	/* RW Latch on CD1/2 VS1/2 usw */
+
+#define PCM990_CF_PLD_REG4	0x1008	/* OFFSET CF REGISTER 4 */
+#define PCM990_CF_REG4_PWRENA	0x0001	/* RW CF Power on (CD1/2 = "00") */
+#define PCM990_CF_REG4_5_3V	0x0002	/* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
+#define PCM990_CF_REG4_3B	0x0004	/* RW 3.0V Backup from VCC (5_3V=0) */
+#define PCM990_CF_REG4_PWG	0x0008	/* R CF-Power is on */
+
+#define PCM990_CF_PLD_REG5	0x100A	/* OFFSET CF REGISTER 5 */
+#define PCM990_CF_REG5_BVD1	0x0001	/* R CF /BVD1 */
+#define PCM990_CF_REG5_BVD2	0x0002	/* R CF /BVD2 */
+#define PCM990_CF_REG5_VS1	0x0004	/* R CF /VS1 */
+#define PCM990_CF_REG5_VS2	0x0008	/* R CF /VS2 */
+
+#define PCM990_CF_PLD_REG6	0x100C	/* OFFSET CF REGISTER 6 */
+#define PCM990_CF_REG6_CD1	0x0001	/* R CF Card_Detect1 */
+#define PCM990_CF_REG6_CD2	0x0002	/* R CF Card_Detect2 */
+
+#ifndef __ASSEMBLY__
+#  define  __PCM990_CF_PLD_REG(x) \
+	(*((volatile unsigned char *)PCM990_CF_PLD_P2V(x)))
+#else
+#  define  __PCM990_CF_PLD_REG(x)	PCM990_CF_PLD_P2V(x)
+#endif
+
+#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0)
+#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1)
+#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2)
+#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3)
+#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4)
+#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5)
+#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6)
+
+/*
+ * Wolfson AC97 Touch
+ */
+#define PCM990_AC97_IRQ_GPIO	10
+#define PCM990_AC97_IRQ		IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
+#define PCM990_AC97_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+
+/*
+ * MMC phyCORE
+ */
+#define PCM990_MMC0_IRQ_GPIO	9
+#define PCM990_MMC0_IRQ		IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
+#define PCM990_MMC0_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+
+/*
+ * USB phyCore
+ */
+#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN)
+#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT)
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
new file mode 100644
index 000000000000..261e5bc958db
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/suspend.h>
+
+struct pxa_cpu_pm_fns {
+	int	save_count;
+	void	(*save)(unsigned long *);
+	void	(*restore)(unsigned long *);
+	int	(*valid)(suspend_state_t state);
+	void	(*enter)(suspend_state_t state);
+};
+
+extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
+
+/* sleep.S */
+extern void pxa25x_cpu_suspend(unsigned int);
+extern void pxa27x_cpu_suspend(unsigned int);
+extern void pxa_cpu_resume(void);
+
+extern int pxa_pm_enter(suspend_state_t state);
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
new file mode 100644
index 000000000000..8956afe8195e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-pxa/include/mach/poodle.h
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Based on:
+ *   arch/arm/mach-sa1100/include/mach/collie.h
+ *
+ * ChangeLog:
+ *   04-06-2001 Lineo Japan, Inc.
+ *   04-16-2001 SHARP Corporation
+ *   Update to 2.6 John Lenz
+ */
+#ifndef __ASM_ARCH_POODLE_H
+#define __ASM_ARCH_POODLE_H  1
+
+/*
+ * GPIOs
+ */
+/* PXA GPIOs */
+#define POODLE_GPIO_ON_KEY		(0)
+#define POODLE_GPIO_AC_IN		(1)
+#define POODLE_GPIO_CO			16
+#define POODLE_GPIO_TP_INT		(5)
+#define POODLE_GPIO_WAKEUP		(11)	/* change battery */
+#define POODLE_GPIO_GA_INT		(10)
+#define POODLE_GPIO_IR_ON		(22)
+#define POODLE_GPIO_HP_IN		(4)
+#define POODLE_GPIO_CF_IRQ		(17)
+#define POODLE_GPIO_CF_CD		(14)
+#define POODLE_GPIO_CF_STSCHG		(14)
+#define POODLE_GPIO_SD_PWR		(33)
+#define POODLE_GPIO_SD_PWR1		(3)
+#define POODLE_GPIO_nSD_CLK		(6)
+#define POODLE_GPIO_nSD_WP		(7)
+#define POODLE_GPIO_nSD_INT		(8)
+#define POODLE_GPIO_nSD_DETECT		(9)
+#define POODLE_GPIO_MAIN_BAT_LOW	(13)
+#define POODLE_GPIO_BAT_COVER		(13)
+#define POODLE_GPIO_USB_PULLUP		(20)
+#define POODLE_GPIO_ADC_TEMP_ON		(21)
+#define POODLE_GPIO_BYPASS_ON		(36)
+#define POODLE_GPIO_CHRG_ON		(38)
+#define POODLE_GPIO_CHRG_FULL		(16)
+#define POODLE_GPIO_DISCHARGE_ON        (42) /* Enable battery discharge */
+
+/* PXA GPIOs */
+#define POODLE_IRQ_GPIO_ON_KEY		IRQ_GPIO(0)
+#define POODLE_IRQ_GPIO_AC_IN		IRQ_GPIO(1)
+#define POODLE_IRQ_GPIO_HP_IN		IRQ_GPIO(4)
+#define POODLE_IRQ_GPIO_CO		IRQ_GPIO(16)
+#define POODLE_IRQ_GPIO_TP_INT		IRQ_GPIO(5)
+#define POODLE_IRQ_GPIO_WAKEUP		IRQ_GPIO(11)
+#define POODLE_IRQ_GPIO_GA_INT		IRQ_GPIO(10)
+#define POODLE_IRQ_GPIO_CF_IRQ		IRQ_GPIO(17)
+#define POODLE_IRQ_GPIO_CF_CD		IRQ_GPIO(14)
+#define POODLE_IRQ_GPIO_nSD_INT		IRQ_GPIO(8)
+#define POODLE_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(9)
+#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO(13)
+
+/* SCOOP GPIOs */
+#define POODLE_SCOOP_CHARGE_ON	SCOOP_GPCR_PA11
+#define POODLE_SCOOP_CP401	SCOOP_GPCR_PA13
+#define POODLE_SCOOP_VPEN	SCOOP_GPCR_PA18
+#define POODLE_SCOOP_L_PCLK	SCOOP_GPCR_PA20
+#define POODLE_SCOOP_L_LCLK	SCOOP_GPCR_PA21
+#define POODLE_SCOOP_HS_OUT	SCOOP_GPCR_PA22
+
+#define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
+#define POODLE_SCOOP_IO_OUT	( 0 )
+
+extern struct platform_device poodle_locomo_device;
+
+#endif /* __ASM_ARCH_POODLE_H  */
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
new file mode 100644
index 000000000000..12288ca3cbb2
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -0,0 +1,1070 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/pxa-regs.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PXA_REGS_H
+#define __PXA_REGS_H
+
+
+/*
+ * PXA Chip selects
+ */
+
+#define PXA_CS0_PHYS	0x00000000
+#define PXA_CS1_PHYS	0x04000000
+#define PXA_CS2_PHYS	0x08000000
+#define PXA_CS3_PHYS	0x0C000000
+#define PXA_CS4_PHYS	0x10000000
+#define PXA_CS5_PHYS	0x14000000
+
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
+#define PCMCIASp	(4*PCMCIAPrtSp)	/* PCMCIA Space [byte]             */
+#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]         */
+#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
+#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]      */
+
+#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]           */
+#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]       */
+#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]    */
+
+#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]           */
+#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]       */
+#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]    */
+
+#define _PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
+                	(0x20000000 + (Nb)*PCMCIASp)
+#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]               */
+#define _PCMCIAAttr(Nb)	        	/* PCMCIA Attribute [0..1]         */ \
+                	(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
+#define _PCMCIAMem(Nb)	        	/* PCMCIA Memory [0..1]            */ \
+                	(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
+
+#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0                        */
+#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O                    */
+#define _PCMCIA0Attr	_PCMCIAAttr (0)	/* PCMCIA 0 Attribute              */
+#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory                 */
+
+#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1                        */
+#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O                    */
+#define _PCMCIA1Attr	_PCMCIAAttr (1)	/* PCMCIA 1 Attribute              */
+#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory                 */
+
+
+
+/*
+ * DMA Controller
+ */
+
+#define DCSR0		__REG(0x40000000)  /* DMA Control / Status Register for Channel 0 */
+#define DCSR1		__REG(0x40000004)  /* DMA Control / Status Register for Channel 1 */
+#define DCSR2		__REG(0x40000008)  /* DMA Control / Status Register for Channel 2 */
+#define DCSR3		__REG(0x4000000c)  /* DMA Control / Status Register for Channel 3 */
+#define DCSR4		__REG(0x40000010)  /* DMA Control / Status Register for Channel 4 */
+#define DCSR5		__REG(0x40000014)  /* DMA Control / Status Register for Channel 5 */
+#define DCSR6		__REG(0x40000018)  /* DMA Control / Status Register for Channel 6 */
+#define DCSR7		__REG(0x4000001c)  /* DMA Control / Status Register for Channel 7 */
+#define DCSR8		__REG(0x40000020)  /* DMA Control / Status Register for Channel 8 */
+#define DCSR9		__REG(0x40000024)  /* DMA Control / Status Register for Channel 9 */
+#define DCSR10		__REG(0x40000028)  /* DMA Control / Status Register for Channel 10 */
+#define DCSR11		__REG(0x4000002c)  /* DMA Control / Status Register for Channel 11 */
+#define DCSR12		__REG(0x40000030)  /* DMA Control / Status Register for Channel 12 */
+#define DCSR13		__REG(0x40000034)  /* DMA Control / Status Register for Channel 13 */
+#define DCSR14		__REG(0x40000038)  /* DMA Control / Status Register for Channel 14 */
+#define DCSR15		__REG(0x4000003c)  /* DMA Control / Status Register for Channel 15 */
+
+#define DCSR(x)		__REG2(0x40000000, (x) << 2)
+
+#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
+#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
+#ifdef CONFIG_PXA27x
+#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
+#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
+#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
+#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
+#define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
+#endif
+#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
+#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
+#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
+#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
+#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
+
+#define DALGN		__REG(0x400000a0)  /* DMA Alignment Register */
+#define DINT		__REG(0x400000f0)  /* DMA Interrupt Register */
+
+#define DRCMR(n)	(*(((n) < 64) ? \
+			&__REG2(0x40000100, ((n) & 0x3f) << 2) : \
+			&__REG2(0x40001100, ((n) & 0x3f) << 2)))
+
+#define DRCMR0		__REG(0x40000100)  /* Request to Channel Map Register for DREQ 0 */
+#define DRCMR1		__REG(0x40000104)  /* Request to Channel Map Register for DREQ 1 */
+#define DRCMR2		__REG(0x40000108)  /* Request to Channel Map Register for I2S receive Request */
+#define DRCMR3		__REG(0x4000010c)  /* Request to Channel Map Register for I2S transmit Request */
+#define DRCMR4		__REG(0x40000110)  /* Request to Channel Map Register for BTUART receive Request */
+#define DRCMR5		__REG(0x40000114)  /* Request to Channel Map Register for BTUART transmit Request. */
+#define DRCMR6		__REG(0x40000118)  /* Request to Channel Map Register for FFUART receive Request */
+#define DRCMR7		__REG(0x4000011c)  /* Request to Channel Map Register for FFUART transmit Request */
+#define DRCMR8		__REG(0x40000120)  /* Request to Channel Map Register for AC97 microphone Request */
+#define DRCMR9		__REG(0x40000124)  /* Request to Channel Map Register for AC97 modem receive Request */
+#define DRCMR10		__REG(0x40000128)  /* Request to Channel Map Register for AC97 modem transmit Request */
+#define DRCMR11		__REG(0x4000012c)  /* Request to Channel Map Register for AC97 audio receive Request */
+#define DRCMR12		__REG(0x40000130)  /* Request to Channel Map Register for AC97 audio transmit Request */
+#define DRCMR13		__REG(0x40000134)  /* Request to Channel Map Register for SSP receive Request */
+#define DRCMR14		__REG(0x40000138)  /* Request to Channel Map Register for SSP transmit Request */
+#define DRCMR15		__REG(0x4000013c)  /* Request to Channel Map Register for SSP2 receive Request */
+#define DRCMR16		__REG(0x40000140)  /* Request to Channel Map Register for SSP2 transmit Request */
+#define DRCMR17		__REG(0x40000144)  /* Request to Channel Map Register for ICP receive Request */
+#define DRCMR18		__REG(0x40000148)  /* Request to Channel Map Register for ICP transmit Request */
+#define DRCMR19		__REG(0x4000014c)  /* Request to Channel Map Register for STUART receive Request */
+#define DRCMR20		__REG(0x40000150)  /* Request to Channel Map Register for STUART transmit Request */
+#define DRCMR21		__REG(0x40000154)  /* Request to Channel Map Register for MMC receive Request */
+#define DRCMR22		__REG(0x40000158)  /* Request to Channel Map Register for MMC transmit Request */
+#define DRCMR23		__REG(0x4000015c)  /* Reserved */
+#define DRCMR24		__REG(0x40000160)  /* Reserved */
+#define DRCMR25		__REG(0x40000164)  /* Request to Channel Map Register for USB endpoint 1 Request */
+#define DRCMR26		__REG(0x40000168)  /* Request to Channel Map Register for USB endpoint 2 Request */
+#define DRCMR27		__REG(0x4000016C)  /* Request to Channel Map Register for USB endpoint 3 Request */
+#define DRCMR28		__REG(0x40000170)  /* Request to Channel Map Register for USB endpoint 4 Request */
+#define DRCMR29		__REG(0x40000174)  /* Reserved */
+#define DRCMR30		__REG(0x40000178)  /* Request to Channel Map Register for USB endpoint 6 Request */
+#define DRCMR31		__REG(0x4000017C)  /* Request to Channel Map Register for USB endpoint 7 Request */
+#define DRCMR32		__REG(0x40000180)  /* Request to Channel Map Register for USB endpoint 8 Request */
+#define DRCMR33		__REG(0x40000184)  /* Request to Channel Map Register for USB endpoint 9 Request */
+#define DRCMR34		__REG(0x40000188)  /* Reserved */
+#define DRCMR35		__REG(0x4000018C)  /* Request to Channel Map Register for USB endpoint 11 Request */
+#define DRCMR36		__REG(0x40000190)  /* Request to Channel Map Register for USB endpoint 12 Request */
+#define DRCMR37		__REG(0x40000194)  /* Request to Channel Map Register for USB endpoint 13 Request */
+#define DRCMR38		__REG(0x40000198)  /* Request to Channel Map Register for USB endpoint 14 Request */
+#define DRCMR39		__REG(0x4000019C)  /* Reserved */
+#define DRCMR66		__REG(0x40001108)  /* Request to Channel Map Register for SSP3 receive Request */
+#define DRCMR67		__REG(0x4000110C)  /* Request to Channel Map Register for SSP3 transmit Request */
+#define DRCMR68		__REG(0x40001110)  /* Request to Channel Map Register for Camera FIFO 0 Request */
+#define DRCMR69		__REG(0x40001114)  /* Request to Channel Map Register for Camera FIFO 1 Request */
+#define DRCMR70		__REG(0x40001118)  /* Request to Channel Map Register for Camera FIFO 2 Request */
+
+#define DRCMRRXSADR	DRCMR2
+#define DRCMRTXSADR	DRCMR3
+#define DRCMRRXBTRBR	DRCMR4
+#define DRCMRTXBTTHR	DRCMR5
+#define DRCMRRXFFRBR	DRCMR6
+#define DRCMRTXFFTHR	DRCMR7
+#define DRCMRRXMCDR	DRCMR8
+#define DRCMRRXMODR	DRCMR9
+#define DRCMRTXMODR	DRCMR10
+#define DRCMRRXPCDR	DRCMR11
+#define DRCMRTXPCDR	DRCMR12
+#define DRCMRRXSSDR	DRCMR13
+#define DRCMRTXSSDR	DRCMR14
+#define DRCMRRXSS2DR   DRCMR15
+#define DRCMRTXSS2DR   DRCMR16
+#define DRCMRRXICDR	DRCMR17
+#define DRCMRTXICDR	DRCMR18
+#define DRCMRRXSTRBR	DRCMR19
+#define DRCMRTXSTTHR	DRCMR20
+#define DRCMRRXMMC	DRCMR21
+#define DRCMRTXMMC	DRCMR22
+#define DRCMRRXSS3DR   DRCMR66
+#define DRCMRTXSS3DR   DRCMR67
+#define DRCMRUDC(x)	DRCMR((x) + 24)
+
+#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
+#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
+
+#define DDADR0		__REG(0x40000200)  /* DMA Descriptor Address Register Channel 0 */
+#define DSADR0		__REG(0x40000204)  /* DMA Source Address Register Channel 0 */
+#define DTADR0		__REG(0x40000208)  /* DMA Target Address Register Channel 0 */
+#define DCMD0		__REG(0x4000020c)  /* DMA Command Address Register Channel 0 */
+#define DDADR1		__REG(0x40000210)  /* DMA Descriptor Address Register Channel 1 */
+#define DSADR1		__REG(0x40000214)  /* DMA Source Address Register Channel 1 */
+#define DTADR1		__REG(0x40000218)  /* DMA Target Address Register Channel 1 */
+#define DCMD1		__REG(0x4000021c)  /* DMA Command Address Register Channel 1 */
+#define DDADR2		__REG(0x40000220)  /* DMA Descriptor Address Register Channel 2 */
+#define DSADR2		__REG(0x40000224)  /* DMA Source Address Register Channel 2 */
+#define DTADR2		__REG(0x40000228)  /* DMA Target Address Register Channel 2 */
+#define DCMD2		__REG(0x4000022c)  /* DMA Command Address Register Channel 2 */
+#define DDADR3		__REG(0x40000230)  /* DMA Descriptor Address Register Channel 3 */
+#define DSADR3		__REG(0x40000234)  /* DMA Source Address Register Channel 3 */
+#define DTADR3		__REG(0x40000238)  /* DMA Target Address Register Channel 3 */
+#define DCMD3		__REG(0x4000023c)  /* DMA Command Address Register Channel 3 */
+#define DDADR4		__REG(0x40000240)  /* DMA Descriptor Address Register Channel 4 */
+#define DSADR4		__REG(0x40000244)  /* DMA Source Address Register Channel 4 */
+#define DTADR4		__REG(0x40000248)  /* DMA Target Address Register Channel 4 */
+#define DCMD4		__REG(0x4000024c)  /* DMA Command Address Register Channel 4 */
+#define DDADR5		__REG(0x40000250)  /* DMA Descriptor Address Register Channel 5 */
+#define DSADR5		__REG(0x40000254)  /* DMA Source Address Register Channel 5 */
+#define DTADR5		__REG(0x40000258)  /* DMA Target Address Register Channel 5 */
+#define DCMD5		__REG(0x4000025c)  /* DMA Command Address Register Channel 5 */
+#define DDADR6		__REG(0x40000260)  /* DMA Descriptor Address Register Channel 6 */
+#define DSADR6		__REG(0x40000264)  /* DMA Source Address Register Channel 6 */
+#define DTADR6		__REG(0x40000268)  /* DMA Target Address Register Channel 6 */
+#define DCMD6		__REG(0x4000026c)  /* DMA Command Address Register Channel 6 */
+#define DDADR7		__REG(0x40000270)  /* DMA Descriptor Address Register Channel 7 */
+#define DSADR7		__REG(0x40000274)  /* DMA Source Address Register Channel 7 */
+#define DTADR7		__REG(0x40000278)  /* DMA Target Address Register Channel 7 */
+#define DCMD7		__REG(0x4000027c)  /* DMA Command Address Register Channel 7 */
+#define DDADR8		__REG(0x40000280)  /* DMA Descriptor Address Register Channel 8 */
+#define DSADR8		__REG(0x40000284)  /* DMA Source Address Register Channel 8 */
+#define DTADR8		__REG(0x40000288)  /* DMA Target Address Register Channel 8 */
+#define DCMD8		__REG(0x4000028c)  /* DMA Command Address Register Channel 8 */
+#define DDADR9		__REG(0x40000290)  /* DMA Descriptor Address Register Channel 9 */
+#define DSADR9		__REG(0x40000294)  /* DMA Source Address Register Channel 9 */
+#define DTADR9		__REG(0x40000298)  /* DMA Target Address Register Channel 9 */
+#define DCMD9		__REG(0x4000029c)  /* DMA Command Address Register Channel 9 */
+#define DDADR10		__REG(0x400002a0)  /* DMA Descriptor Address Register Channel 10 */
+#define DSADR10		__REG(0x400002a4)  /* DMA Source Address Register Channel 10 */
+#define DTADR10		__REG(0x400002a8)  /* DMA Target Address Register Channel 10 */
+#define DCMD10		__REG(0x400002ac)  /* DMA Command Address Register Channel 10 */
+#define DDADR11		__REG(0x400002b0)  /* DMA Descriptor Address Register Channel 11 */
+#define DSADR11		__REG(0x400002b4)  /* DMA Source Address Register Channel 11 */
+#define DTADR11		__REG(0x400002b8)  /* DMA Target Address Register Channel 11 */
+#define DCMD11		__REG(0x400002bc)  /* DMA Command Address Register Channel 11 */
+#define DDADR12		__REG(0x400002c0)  /* DMA Descriptor Address Register Channel 12 */
+#define DSADR12		__REG(0x400002c4)  /* DMA Source Address Register Channel 12 */
+#define DTADR12		__REG(0x400002c8)  /* DMA Target Address Register Channel 12 */
+#define DCMD12		__REG(0x400002cc)  /* DMA Command Address Register Channel 12 */
+#define DDADR13		__REG(0x400002d0)  /* DMA Descriptor Address Register Channel 13 */
+#define DSADR13		__REG(0x400002d4)  /* DMA Source Address Register Channel 13 */
+#define DTADR13		__REG(0x400002d8)  /* DMA Target Address Register Channel 13 */
+#define DCMD13		__REG(0x400002dc)  /* DMA Command Address Register Channel 13 */
+#define DDADR14		__REG(0x400002e0)  /* DMA Descriptor Address Register Channel 14 */
+#define DSADR14		__REG(0x400002e4)  /* DMA Source Address Register Channel 14 */
+#define DTADR14		__REG(0x400002e8)  /* DMA Target Address Register Channel 14 */
+#define DCMD14		__REG(0x400002ec)  /* DMA Command Address Register Channel 14 */
+#define DDADR15		__REG(0x400002f0)  /* DMA Descriptor Address Register Channel 15 */
+#define DSADR15		__REG(0x400002f4)  /* DMA Source Address Register Channel 15 */
+#define DTADR15		__REG(0x400002f8)  /* DMA Target Address Register Channel 15 */
+#define DCMD15		__REG(0x400002fc)  /* DMA Command Address Register Channel 15 */
+
+#define DDADR(x)	__REG2(0x40000200, (x) << 4)
+#define DSADR(x)	__REG2(0x40000204, (x) << 4)
+#define DTADR(x)	__REG2(0x40000208, (x) << 4)
+#define DCMD(x)		__REG2(0x4000020c, (x) << 4)
+
+#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
+#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
+
+#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
+#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
+#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
+#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
+#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
+#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
+#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
+#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
+#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
+#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
+#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
+#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
+
+
+/*
+ * UARTs
+ */
+
+/* Full Function UART (FFUART) */
+#define FFUART		FFRBR
+#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
+#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
+#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
+#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
+#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
+#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
+#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
+#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
+#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
+#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
+#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
+#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Bluetooth UART (BTUART) */
+#define BTUART		BTRBR
+#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
+#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
+#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
+#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
+#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
+#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
+#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
+#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
+#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
+#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
+#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
+#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Standard UART (STUART) */
+#define STUART		STRBR
+#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
+#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
+#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
+#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
+#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
+#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
+#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
+#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
+#define STMSR		__REG(0x40700018)  /* Reserved */
+#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
+#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
+#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Hardware UART (HWUART) */
+#define HWUART		HWRBR
+#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
+#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
+#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
+#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
+#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
+#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
+#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
+#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
+#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
+#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
+#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
+#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
+#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
+#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
+#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
+#define IER_UUE		(1 << 6)	/* UART Unit Enable */
+#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
+#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
+#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
+#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
+#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
+#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
+#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
+#define IIR_TOD		(1 << 3)	/* Time Out Detected */
+#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
+#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
+#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
+
+#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
+#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
+#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
+#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
+#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1	(0)
+#define FCR_ITL_8	(FCR_ITL1)
+#define FCR_ITL_16	(FCR_ITL2)
+#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
+#define LCR_SB		(1 << 6)	/* Set Break */
+#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
+#define LCR_EPS		(1 << 4)	/* Even Parity Select */
+#define LCR_PEN		(1 << 3)	/* Parity Enable */
+#define LCR_STB		(1 << 2)	/* Stop Bit */
+#define LCR_WLS1	(1 << 1)	/* Word Length Select */
+#define LCR_WLS0	(1 << 0)	/* Word Length Select */
+
+#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
+#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
+#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
+#define LSR_BI		(1 << 4)	/* Break Interrupt */
+#define LSR_FE		(1 << 3)	/* Framing Error */
+#define LSR_PE		(1 << 2)	/* Parity Error */
+#define LSR_OE		(1 << 1)	/* Overrun Error */
+#define LSR_DR		(1 << 0)	/* Data Ready */
+
+#define MCR_LOOP	(1 << 4)
+#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
+#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
+#define MCR_RTS		(1 << 1)	/* Request to Send */
+#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
+
+#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
+#define MSR_RI		(1 << 6)	/* Ring Indicator */
+#define MSR_DSR		(1 << 5)	/* Data Set Ready */
+#define MSR_CTS		(1 << 4)	/* Clear To Send */
+#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
+#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
+#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
+#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
+
+/*
+ * IrSR (Infrared Selection Register)
+ */
+#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
+#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
+#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
+#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
+#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
+
+
+/*
+ * I2C registers
+ */
+
+#define IBMR		__REG(0x40301680)  /* I2C Bus Monitor Register - IBMR */
+#define IDBR		__REG(0x40301688)  /* I2C Data Buffer Register - IDBR */
+#define ICR		__REG(0x40301690)  /* I2C Control Register - ICR */
+#define ISR		__REG(0x40301698)  /* I2C Status Register - ISR */
+#define ISAR		__REG(0x403016A0)  /* I2C Slave Address Register - ISAR */
+
+#define PWRIBMR    __REG(0x40f00180)  /* Power I2C Bus Monitor Register-IBMR */
+#define PWRIDBR    __REG(0x40f00188)  /* Power I2C Data Buffer Register-IDBR */
+#define PWRICR __REG(0x40f00190)  /* Power I2C Control Register - ICR */
+#define PWRISR __REG(0x40f00198)  /* Power I2C Status Register - ISR */
+#define PWRISAR    __REG(0x40f001A0)  /*Power I2C Slave Address Register-ISAR */
+
+#define ICR_START	(1 << 0)	   /* start bit */
+#define ICR_STOP	(1 << 1)	   /* stop bit */
+#define ICR_ACKNAK	(1 << 2)	   /* send ACK(0) or NAK(1) */
+#define ICR_TB		(1 << 3)	   /* transfer byte bit */
+#define ICR_MA		(1 << 4)	   /* master abort */
+#define ICR_SCLE	(1 << 5)	   /* master clock enable */
+#define ICR_IUE		(1 << 6)	   /* unit enable */
+#define ICR_GCD		(1 << 7)	   /* general call disable */
+#define ICR_ITEIE	(1 << 8)	   /* enable tx interrupts */
+#define ICR_IRFIE	(1 << 9)	   /* enable rx interrupts */
+#define ICR_BEIE	(1 << 10)	   /* enable bus error ints */
+#define ICR_SSDIE	(1 << 11)	   /* slave STOP detected int enable */
+#define ICR_ALDIE	(1 << 12)	   /* enable arbitration interrupt */
+#define ICR_SADIE	(1 << 13)	   /* slave address detected int enable */
+#define ICR_UR		(1 << 14)	   /* unit reset */
+
+#define ISR_RWM		(1 << 0)	   /* read/write mode */
+#define ISR_ACKNAK	(1 << 1)	   /* ack/nak status */
+#define ISR_UB		(1 << 2)	   /* unit busy */
+#define ISR_IBB		(1 << 3)	   /* bus busy */
+#define ISR_SSD		(1 << 4)	   /* slave stop detected */
+#define ISR_ALD		(1 << 5)	   /* arbitration loss detected */
+#define ISR_ITE		(1 << 6)	   /* tx buffer empty */
+#define ISR_IRF		(1 << 7)	   /* rx buffer full */
+#define ISR_GCAD	(1 << 8)	   /* general call address detected */
+#define ISR_SAD		(1 << 9)	   /* slave address detected */
+#define ISR_BED		(1 << 10)	   /* bus error no ACK/NAK */
+
+
+/*
+ * Serial Audio Controller
+ */
+
+#define SACR0		__REG(0x40400000)  /* Global Control Register */
+#define SACR1		__REG(0x40400004)  /* Serial Audio I 2 S/MSB-Justified Control Register */
+#define SASR0		__REG(0x4040000C)  /* Serial Audio I 2 S/MSB-Justified Interface and FIFO Status Register */
+#define SAIMR		__REG(0x40400014)  /* Serial Audio Interrupt Mask Register */
+#define SAICR		__REG(0x40400018)  /* Serial Audio Interrupt Clear Register */
+#define SADIV		__REG(0x40400060)  /* Audio Clock Divider Register. */
+#define SADR		__REG(0x40400080)  /* Serial Audio Data Register (TX and RX FIFO access Register). */
+
+#define SACR0_RFTH(x)	((x) << 12)	/* Rx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_TFTH(x)	((x) << 8)	/* Tx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_STRF	(1 << 5)	/* FIFO Select for EFWR Special Function */
+#define SACR0_EFWR	(1 << 4)	/* Enable EFWR Function  */
+#define SACR0_RST	(1 << 3)	/* FIFO, i2s Register Reset */
+#define SACR0_BCKD	(1 << 2) 	/* Bit Clock Direction */
+#define SACR0_ENB	(1 << 0)	/* Enable I2S Link */
+#define SACR1_ENLBF	(1 << 5)	/* Enable Loopback */
+#define SACR1_DRPL	(1 << 4) 	/* Disable Replaying Function */
+#define SACR1_DREC	(1 << 3)	/* Disable Recording Function */
+#define SACR1_AMSL	(1 << 0)	/* Specify Alternate Mode */
+
+#define SASR0_I2SOFF	(1 << 7)	/* Controller Status */
+#define SASR0_ROR	(1 << 6)	/* Rx FIFO Overrun */
+#define SASR0_TUR	(1 << 5)	/* Tx FIFO Underrun */
+#define SASR0_RFS	(1 << 4)	/* Rx FIFO Service Request */
+#define SASR0_TFS	(1 << 3)	/* Tx FIFO Service Request */
+#define SASR0_BSY	(1 << 2)	/* I2S Busy */
+#define SASR0_RNE	(1 << 1)	/* Rx FIFO Not Empty */
+#define SASR0_TNF	(1 << 0) 	/* Tx FIFO Not Empty */
+
+#define SAICR_ROR	(1 << 6)	/* Clear Rx FIFO Overrun Interrupt */
+#define SAICR_TUR	(1 << 5)	/* Clear Tx FIFO Underrun Interrupt */
+
+#define SAIMR_ROR	(1 << 6)	/* Enable Rx FIFO Overrun Condition Interrupt */
+#define SAIMR_TUR	(1 << 5)	/* Enable Tx FIFO Underrun Condition Interrupt */
+#define SAIMR_RFS	(1 << 4)	/* Enable Rx FIFO Service Interrupt */
+#define SAIMR_TFS	(1 << 3)	/* Enable Tx FIFO Service Interrupt */
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
+#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define PICR		__REG(0x40500004)  /* PCM In Control Register */
+#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
+#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define GCR		__REG(0x4050000C)  /* Global Control Register */
+#ifdef CONFIG_PXA3xx
+#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */
+#endif
+#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
+#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
+#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
+#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
+#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
+
+#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
+#define POSR_FIFOE	(1 << 4)	/* FIFO error */
+#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define PISR		__REG(0x40500014)  /* PCM In Status Register */
+#define PISR_FIFOE	(1 << 4)	/* FIFO error */
+#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
+#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define GSR		__REG(0x4050001C)  /* Global Status Register */
+#define GSR_CDONE	(1 << 19)	/* Command Done */
+#define GSR_SDONE	(1 << 18)	/* Status Done */
+#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
+#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
+#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
+#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
+#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
+#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
+#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */
+#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
+#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
+#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */
+#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
+#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
+#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
+
+#define CAR		__REG(0x40500020)  /* CODEC Access Register */
+#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
+
+#define PCDR		__REG(0x40500040)  /* PCM FIFO Data Register */
+#define MCDR		__REG(0x40500060)  /* Mic-in FIFO Data Register */
+
+#define MOCR		__REG(0x40500100)  /* Modem Out Control Register */
+#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
+#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MICR		__REG(0x40500108)  /* Modem In Control Register */
+#define MICR_FEIE	(1 << 3)	/* FIFO Error */
+#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MOSR		__REG(0x40500110)  /* Modem Out Status Register */
+#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MISR		__REG(0x40500118)  /* Modem In Status Register */
+#define MISR_FIFOE	(1 << 4)	/* FIFO error */
+#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MODR		__REG(0x40500140)  /* Modem FIFO Data Register */
+
+#define PAC_REG_BASE	__REG(0x40500200)  /* Primary Audio Codec */
+#define SAC_REG_BASE	__REG(0x40500300)  /* Secondary Audio Codec */
+#define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
+#define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
+
+
+/*
+ * Fast Infrared Communication Port
+ */
+
+#define FICP		__REG(0x40800000)  /* Start of FICP area */
+#define ICCR0		__REG(0x40800000)  /* ICP Control Register 0 */
+#define ICCR1		__REG(0x40800004)  /* ICP Control Register 1 */
+#define ICCR2		__REG(0x40800008)  /* ICP Control Register 2 */
+#define ICDR		__REG(0x4080000c)  /* ICP Data Register */
+#define ICSR0		__REG(0x40800014)  /* ICP Status Register 0 */
+#define ICSR1		__REG(0x40800018)  /* ICP Status Register 1 */
+
+#define ICCR0_AME	(1 << 7)	/* Address match enable */
+#define ICCR0_TIE	(1 << 6)	/* Transmit FIFO interrupt enable */
+#define ICCR0_RIE	(1 << 5)	/* Recieve FIFO interrupt enable */
+#define ICCR0_RXE	(1 << 4)	/* Receive enable */
+#define ICCR0_TXE	(1 << 3)	/* Transmit enable */
+#define ICCR0_TUS	(1 << 2)	/* Transmit FIFO underrun select */
+#define ICCR0_LBM	(1 << 1)	/* Loopback mode */
+#define ICCR0_ITR	(1 << 0)	/* IrDA transmission */
+
+#define ICCR2_RXP       (1 << 3)	/* Receive Pin Polarity select */
+#define ICCR2_TXP       (1 << 2)	/* Transmit Pin Polarity select */
+#define ICCR2_TRIG	(3 << 0)	/* Receive FIFO Trigger threshold */
+#define ICCR2_TRIG_8    (0 << 0)	/* 	>= 8 bytes */
+#define ICCR2_TRIG_16   (1 << 0)	/*	>= 16 bytes */
+#define ICCR2_TRIG_32   (2 << 0)	/*	>= 32 bytes */
+
+#ifdef CONFIG_PXA27x
+#define ICSR0_EOC	(1 << 6)	/* DMA End of Descriptor Chain */
+#endif
+#define ICSR0_FRE	(1 << 5)	/* Framing error */
+#define ICSR0_RFS	(1 << 4)	/* Receive FIFO service request */
+#define ICSR0_TFS	(1 << 3)	/* Transnit FIFO service request */
+#define ICSR0_RAB	(1 << 2)	/* Receiver abort */
+#define ICSR0_TUR	(1 << 1)	/* Trunsmit FIFO underun */
+#define ICSR0_EIF	(1 << 0)	/* End/Error in FIFO */
+
+#define ICSR1_ROR	(1 << 6)	/* Receiver FIFO underrun  */
+#define ICSR1_CRE	(1 << 5)	/* CRC error */
+#define ICSR1_EOF	(1 << 4)	/* End of frame */
+#define ICSR1_TNF	(1 << 3)	/* Transmit FIFO not full */
+#define ICSR1_RNE	(1 << 2)	/* Receive FIFO not empty */
+#define ICSR1_TBY	(1 << 1)	/* Tramsmiter busy flag */
+#define ICSR1_RSY	(1 << 0)	/* Recevier synchronized flag */
+
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR		__REG(0x40900000)  /* RTC Count Register */
+#define RTAR		__REG(0x40900004)  /* RTC Alarm Register */
+#define RTSR		__REG(0x40900008)  /* RTC Status Register */
+#define RTTR		__REG(0x4090000C)  /* RTC Timer Trim Register */
+#define PIAR		__REG(0x40900038)  /* Periodic Interrupt Alarm Register */
+
+#define RTSR_PICE	(1 << 15)	/* Periodic interrupt count enable */
+#define RTSR_PIALE	(1 << 14)	/* Periodic interrupt Alarm enable */
+#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
+#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
+#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
+#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
+
+
+/*
+ * OS Timer & Match Registers
+ */
+
+#define OSMR0		__REG(0x40A00000)  /* */
+#define OSMR1		__REG(0x40A00004)  /* */
+#define OSMR2		__REG(0x40A00008)  /* */
+#define OSMR3		__REG(0x40A0000C)  /* */
+#define OSMR4		__REG(0x40A00080)  /* */
+#define OSCR		__REG(0x40A00010)  /* OS Timer Counter Register */
+#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register */
+#define OMCR4		__REG(0x40A000C0)  /* */
+#define OSSR		__REG(0x40A00014)  /* OS Timer Status Register */
+#define OWER		__REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
+#define OIER		__REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
+#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
+#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
+#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
+
+#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */
+
+#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
+#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
+#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
+#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
+
+
+/*
+ * Pulse Width Modulator
+ */
+
+#define PWM_CTRL0	__REG(0x40B00000)  /* PWM 0 Control Register */
+#define PWM_PWDUTY0	__REG(0x40B00004)  /* PWM 0 Duty Cycle Register */
+#define PWM_PERVAL0	__REG(0x40B00008)  /* PWM 0 Period Control Register */
+
+#define PWM_CTRL1	__REG(0x40C00000)  /* PWM 1Control Register */
+#define PWM_PWDUTY1	__REG(0x40C00004)  /* PWM 1 Duty Cycle Register */
+#define PWM_PERVAL1	__REG(0x40C00008)  /* PWM 1 Period Control Register */
+
+
+/*
+ * Interrupt Controller
+ */
+
+#define ICIP		__REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
+#define ICMR		__REG(0x40D00004)  /* Interrupt Controller Mask Register */
+#define ICLR		__REG(0x40D00008)  /* Interrupt Controller Level Register */
+#define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
+#define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
+#define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
+
+#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
+#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
+#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
+
+/*
+ * General Purpose I/O
+ */
+
+#define GPIO0_BASE	((void __iomem *)io_p2v(0x40E00000))
+#define GPIO1_BASE	((void __iomem *)io_p2v(0x40E00004))
+#define GPIO2_BASE	((void __iomem *)io_p2v(0x40E00008))
+#define GPIO3_BASE	((void __iomem *)io_p2v(0x40E00100))
+
+#define GPLR_OFFSET	0x00
+#define GPDR_OFFSET	0x0C
+#define GPSR_OFFSET	0x18
+#define GPCR_OFFSET	0x24
+#define GRER_OFFSET	0x30
+#define GFER_OFFSET	0x3C
+#define GEDR_OFFSET	0x48
+
+#define GPLR0		__REG(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
+#define GPLR1		__REG(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
+#define GPLR2		__REG(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */
+
+#define GPDR0		__REG(0x40E0000C)  /* GPIO Pin Direction Register GPIO<31:0> */
+#define GPDR1		__REG(0x40E00010)  /* GPIO Pin Direction Register GPIO<63:32> */
+#define GPDR2		__REG(0x40E00014)  /* GPIO Pin Direction Register GPIO<80:64> */
+
+#define GPSR0		__REG(0x40E00018)  /* GPIO Pin Output Set Register GPIO<31:0> */
+#define GPSR1		__REG(0x40E0001C)  /* GPIO Pin Output Set Register GPIO<63:32> */
+#define GPSR2		__REG(0x40E00020)  /* GPIO Pin Output Set Register GPIO<80:64> */
+
+#define GPCR0		__REG(0x40E00024)  /* GPIO Pin Output Clear Register GPIO<31:0> */
+#define GPCR1		__REG(0x40E00028)  /* GPIO Pin Output Clear Register GPIO <63:32> */
+#define GPCR2		__REG(0x40E0002C)  /* GPIO Pin Output Clear Register GPIO <80:64> */
+
+#define GRER0		__REG(0x40E00030)  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
+#define GRER1		__REG(0x40E00034)  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
+#define GRER2		__REG(0x40E00038)  /* GPIO Rising-Edge Detect Register GPIO<80:64> */
+
+#define GFER0		__REG(0x40E0003C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
+#define GFER1		__REG(0x40E00040)  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
+#define GFER2		__REG(0x40E00044)  /* GPIO Falling-Edge Detect Register GPIO<80:64> */
+
+#define GEDR0		__REG(0x40E00048)  /* GPIO Edge Detect Status Register GPIO<31:0> */
+#define GEDR1		__REG(0x40E0004C)  /* GPIO Edge Detect Status Register GPIO<63:32> */
+#define GEDR2		__REG(0x40E00050)  /* GPIO Edge Detect Status Register GPIO<80:64> */
+
+#define GAFR0_L		__REG(0x40E00054)  /* GPIO Alternate Function Select Register GPIO<15:0> */
+#define GAFR0_U		__REG(0x40E00058)  /* GPIO Alternate Function Select Register GPIO<31:16> */
+#define GAFR1_L		__REG(0x40E0005C)  /* GPIO Alternate Function Select Register GPIO<47:32> */
+#define GAFR1_U		__REG(0x40E00060)  /* GPIO Alternate Function Select Register GPIO<63:48> */
+#define GAFR2_L		__REG(0x40E00064)  /* GPIO Alternate Function Select Register GPIO<79:64> */
+#define GAFR2_U		__REG(0x40E00068)  /* GPIO Alternate Function Select Register GPIO<95-80> */
+#define GAFR3_L		__REG(0x40E0006C)  /* GPIO Alternate Function Select Register GPIO<111:96> */
+#define GAFR3_U		__REG(0x40E00070)  /* GPIO Alternate Function Select Register GPIO<127:112> */
+
+#define GPLR3		__REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
+#define GPDR3		__REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
+#define GPSR3		__REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
+#define GPCR3		__REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO<127:96> */
+#define GRER3		__REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
+#define GFER3		__REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
+#define GEDR3		__REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */
+
+/* More handy macros.  The argument is a literal GPIO number. */
+
+#define GPIO_bit(x)	(1 << ((x) & 0x1f))
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+
+/* Interrupt Controller */
+
+#define _GPLR(x)	__REG2(0x40E00000, ((x) & 0x60) >> 3)
+#define _GPDR(x)	__REG2(0x40E0000C, ((x) & 0x60) >> 3)
+#define _GPSR(x)	__REG2(0x40E00018, ((x) & 0x60) >> 3)
+#define _GPCR(x)	__REG2(0x40E00024, ((x) & 0x60) >> 3)
+#define _GRER(x)	__REG2(0x40E00030, ((x) & 0x60) >> 3)
+#define _GFER(x)	__REG2(0x40E0003C, ((x) & 0x60) >> 3)
+#define _GEDR(x)	__REG2(0x40E00048, ((x) & 0x60) >> 3)
+#define _GAFR(x)	__REG2(0x40E00054, ((x) & 0x70) >> 2)
+
+#define GPLR(x) 	(*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
+#define GPDR(x)		(*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
+#define GPSR(x)		(*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
+#define GPCR(x)		(*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
+#define GRER(x)		(*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
+#define GFER(x)		(*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
+#define GEDR(x)		(*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
+#define GAFR(x)		(*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
+			 ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
+#else
+
+#define GPLR(x)		__REG2(0x40E00000, ((x) & 0x60) >> 3)
+#define GPDR(x)		__REG2(0x40E0000C, ((x) & 0x60) >> 3)
+#define GPSR(x)		__REG2(0x40E00018, ((x) & 0x60) >> 3)
+#define GPCR(x)		__REG2(0x40E00024, ((x) & 0x60) >> 3)
+#define GRER(x)		__REG2(0x40E00030, ((x) & 0x60) >> 3)
+#define GFER(x)		__REG2(0x40E0003C, ((x) & 0x60) >> 3)
+#define GEDR(x)		__REG2(0x40E00048, ((x) & 0x60) >> 3)
+#define GAFR(x)		__REG2(0x40E00054, ((x) & 0x70) >> 2)
+
+#endif
+
+/*
+ * Power Manager - see pxa2xx-regs.h
+ */
+
+/*
+ * SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h
+ */
+
+/*
+ * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
+ */
+
+/*
+ * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+ */
+
+#ifdef CONFIG_PXA27x
+
+/* Camera Interface */
+#define CICR0		__REG(0x50000000)
+#define CICR1		__REG(0x50000004)
+#define CICR2		__REG(0x50000008)
+#define CICR3		__REG(0x5000000C)
+#define CICR4		__REG(0x50000010)
+#define CISR		__REG(0x50000014)
+#define CIFR		__REG(0x50000018)
+#define CITOR		__REG(0x5000001C)
+#define CIBR0		__REG(0x50000028)
+#define CIBR1		__REG(0x50000030)
+#define CIBR2		__REG(0x50000038)
+
+#define CICR0_DMAEN	(1 << 31)	/* DMA request enable */
+#define CICR0_PAR_EN	(1 << 30)	/* Parity enable */
+#define CICR0_SL_CAP_EN	(1 << 29)	/* Capture enable for slave mode */
+#define CICR0_ENB	(1 << 28)	/* Camera interface enable */
+#define CICR0_DIS	(1 << 27)	/* Camera interface disable */
+#define CICR0_SIM	(0x7 << 24)	/* Sensor interface mode mask */
+#define CICR0_TOM	(1 << 9)	/* Time-out mask */
+#define CICR0_RDAVM	(1 << 8)	/* Receive-data-available mask */
+#define CICR0_FEM	(1 << 7)	/* FIFO-empty mask */
+#define CICR0_EOLM	(1 << 6)	/* End-of-line mask */
+#define CICR0_PERRM	(1 << 5)	/* Parity-error mask */
+#define CICR0_QDM	(1 << 4)	/* Quick-disable mask */
+#define CICR0_CDM	(1 << 3)	/* Disable-done mask */
+#define CICR0_SOFM	(1 << 2)	/* Start-of-frame mask */
+#define CICR0_EOFM	(1 << 1)	/* End-of-frame mask */
+#define CICR0_FOM	(1 << 0)	/* FIFO-overrun mask */
+
+#define CICR1_TBIT	(1 << 31)	/* Transparency bit */
+#define CICR1_RGBT_CONV	(0x3 << 29)	/* RGBT conversion mask */
+#define CICR1_PPL	(0x7ff << 15)	/* Pixels per line mask */
+#define CICR1_RGB_CONV	(0x7 << 12)	/* RGB conversion mask */
+#define CICR1_RGB_F	(1 << 11)	/* RGB format */
+#define CICR1_YCBCR_F	(1 << 10)	/* YCbCr format */
+#define CICR1_RGB_BPP	(0x7 << 7)	/* RGB bis per pixel mask */
+#define CICR1_RAW_BPP	(0x3 << 5)	/* Raw bis per pixel mask */
+#define CICR1_COLOR_SP	(0x3 << 3)	/* Color space mask */
+#define CICR1_DW	(0x7 << 0)	/* Data width mask */
+
+#define CICR2_BLW	(0xff << 24)	/* Beginning-of-line pixel clock
+					   wait count mask */
+#define CICR2_ELW	(0xff << 16)	/* End-of-line pixel clock
+					   wait count mask */
+#define CICR2_HSW	(0x3f << 10)	/* Horizontal sync pulse width mask */
+#define CICR2_BFPW	(0x3f << 3)	/* Beginning-of-frame pixel clock
+					   wait count mask */
+#define CICR2_FSW	(0x7 << 0)	/* Frame stabilization
+					   wait count mask */
+
+#define CICR3_BFW	(0xff << 24)	/* Beginning-of-frame line clock
+					   wait count mask */
+#define CICR3_EFW	(0xff << 16)	/* End-of-frame line clock
+					   wait count mask */
+#define CICR3_VSW	(0x3f << 10)	/* Vertical sync pulse width mask */
+#define CICR3_BFPW	(0x3f << 3)	/* Beginning-of-frame pixel clock
+					   wait count mask */
+#define CICR3_LPF	(0x7ff << 0)	/* Lines per frame mask */
+
+#define CICR4_MCLK_DLY	(0x3 << 24)	/* MCLK Data Capture Delay mask */
+#define CICR4_PCLK_EN	(1 << 23)	/* Pixel clock enable */
+#define CICR4_PCP	(1 << 22)	/* Pixel clock polarity */
+#define CICR4_HSP	(1 << 21)	/* Horizontal sync polarity */
+#define CICR4_VSP	(1 << 20)	/* Vertical sync polarity */
+#define CICR4_MCLK_EN	(1 << 19)	/* MCLK enable */
+#define CICR4_FR_RATE	(0x7 << 8)	/* Frame rate mask */
+#define CICR4_DIV	(0xff << 0)	/* Clock divisor mask */
+
+#define CISR_FTO	(1 << 15)	/* FIFO time-out */
+#define CISR_RDAV_2	(1 << 14)	/* Channel 2 receive data available */
+#define CISR_RDAV_1	(1 << 13)	/* Channel 1 receive data available */
+#define CISR_RDAV_0	(1 << 12)	/* Channel 0 receive data available */
+#define CISR_FEMPTY_2	(1 << 11)	/* Channel 2 FIFO empty */
+#define CISR_FEMPTY_1	(1 << 10)	/* Channel 1 FIFO empty */
+#define CISR_FEMPTY_0	(1 << 9)	/* Channel 0 FIFO empty */
+#define CISR_EOL	(1 << 8)	/* End of line */
+#define CISR_PAR_ERR	(1 << 7)	/* Parity error */
+#define CISR_CQD	(1 << 6)	/* Camera interface quick disable */
+#define CISR_CDD	(1 << 5)	/* Camera interface disable done */
+#define CISR_SOF	(1 << 4)	/* Start of frame */
+#define CISR_EOF	(1 << 3)	/* End of frame */
+#define CISR_IFO_2	(1 << 2)	/* FIFO overrun for Channel 2 */
+#define CISR_IFO_1	(1 << 1)	/* FIFO overrun for Channel 1 */
+#define CISR_IFO_0	(1 << 0)	/* FIFO overrun for Channel 0 */
+
+#define CIFR_FLVL2	(0x7f << 23)	/* FIFO 2 level mask */
+#define CIFR_FLVL1	(0x7f << 16)	/* FIFO 1 level mask */
+#define CIFR_FLVL0	(0xff << 8)	/* FIFO 0 level mask */
+#define CIFR_THL_0	(0x3 << 4)	/* Threshold Level for Channel 0 FIFO */
+#define CIFR_RESET_F	(1 << 3)	/* Reset input FIFOs */
+#define CIFR_FEN2	(1 << 2)	/* FIFO enable for channel 2 */
+#define CIFR_FEN1	(1 << 1)	/* FIFO enable for channel 1 */
+#define CIFR_FEN0	(1 << 0)	/* FIFO enable for channel 0 */
+
+#define SRAM_SIZE		0x40000 /* 4x64K  */
+
+#define SRAM_MEM_PHYS		0x5C000000
+
+#define IMPMCR		__REG(0x58000000) /* IM Power Management Control Reg */
+#define IMPMSR		__REG(0x58000008) /* IM Power Management Status Reg */
+
+#define IMPMCR_PC3		(0x3 << 22) /* Bank 3 Power Control */
+#define IMPMCR_PC3_RUN_MODE	(0x0 << 22) /*   Run mode */
+#define IMPMCR_PC3_STANDBY_MODE	(0x1 << 22) /*   Standby mode */
+#define IMPMCR_PC3_AUTO_MODE	(0x3 << 22) /*   Automatically controlled */
+
+#define IMPMCR_PC2		(0x3 << 20) /* Bank 2 Power Control */
+#define IMPMCR_PC2_RUN_MODE	(0x0 << 20) /*   Run mode */
+#define IMPMCR_PC2_STANDBY_MODE	(0x1 << 20) /*   Standby mode */
+#define IMPMCR_PC2_AUTO_MODE	(0x3 << 20) /*   Automatically controlled */
+
+#define IMPMCR_PC1		(0x3 << 18) /* Bank 1 Power Control */
+#define IMPMCR_PC1_RUN_MODE	(0x0 << 18) /*   Run mode */
+#define IMPMCR_PC1_STANDBY_MODE	(0x1 << 18) /*   Standby mode */
+#define IMPMCR_PC1_AUTO_MODE	(0x3 << 18) /*   Automatically controlled */
+
+#define IMPMCR_PC0		(0x3 << 16) /* Bank 0 Power Control */
+#define IMPMCR_PC0_RUN_MODE	(0x0 << 16) /*   Run mode */
+#define IMPMCR_PC0_STANDBY_MODE	(0x1 << 16) /*   Standby mode */
+#define IMPMCR_PC0_AUTO_MODE	(0x3 << 16) /*   Automatically controlled */
+
+#define IMPMCR_AW3		(1 << 11) /* Bank 3 Automatic Wake-up enable */
+#define IMPMCR_AW2		(1 << 10) /* Bank 2 Automatic Wake-up enable */
+#define IMPMCR_AW1		(1 << 9)  /* Bank 1 Automatic Wake-up enable */
+#define IMPMCR_AW0		(1 << 8)  /* Bank 0 Automatic Wake-up enable */
+
+#define IMPMCR_DST		(0xFF << 0) /* Delay Standby Time, ms */
+
+#define IMPMSR_PS3		(0x3 << 6) /* Bank 3 Power Status: */
+#define IMPMSR_PS3_RUN_MODE	(0x0 << 6) /*    Run mode */
+#define IMPMSR_PS3_STANDBY_MODE	(0x1 << 6) /*    Standby mode */
+
+#define IMPMSR_PS2		(0x3 << 4) /* Bank 2 Power Status: */
+#define IMPMSR_PS2_RUN_MODE	(0x0 << 4) /*    Run mode */
+#define IMPMSR_PS2_STANDBY_MODE	(0x1 << 4) /*    Standby mode */
+
+#define IMPMSR_PS1		(0x3 << 2) /* Bank 1 Power Status: */
+#define IMPMSR_PS1_RUN_MODE	(0x0 << 2) /*    Run mode */
+#define IMPMSR_PS1_STANDBY_MODE	(0x1 << 2) /*    Standby mode */
+
+#define IMPMSR_PS0		(0x3 << 0) /* Bank 0 Power Status: */
+#define IMPMSR_PS0_RUN_MODE	(0x0 << 0) /*    Run mode */
+#define IMPMSR_PS0_STANDBY_MODE	(0x1 << 0) /*    Standby mode */
+
+#endif
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+/*
+ * UHC: USB Host Controller (OHCI-like) register definitions
+ */
+#define UHC_BASE_PHYS	(0x4C000000)
+#define UHCREV		__REG(0x4C000000) /* UHC HCI Spec Revision */
+#define UHCHCON		__REG(0x4C000004) /* UHC Host Control Register */
+#define UHCCOMS		__REG(0x4C000008) /* UHC Command Status Register */
+#define UHCINTS		__REG(0x4C00000C) /* UHC Interrupt Status Register */
+#define UHCINTE		__REG(0x4C000010) /* UHC Interrupt Enable */
+#define UHCINTD		__REG(0x4C000014) /* UHC Interrupt Disable */
+#define UHCHCCA		__REG(0x4C000018) /* UHC Host Controller Comm. Area */
+#define UHCPCED		__REG(0x4C00001C) /* UHC Period Current Endpt Descr */
+#define UHCCHED		__REG(0x4C000020) /* UHC Control Head Endpt Descr */
+#define UHCCCED		__REG(0x4C000024) /* UHC Control Current Endpt Descr */
+#define UHCBHED		__REG(0x4C000028) /* UHC Bulk Head Endpt Descr */
+#define UHCBCED		__REG(0x4C00002C) /* UHC Bulk Current Endpt Descr */
+#define UHCDHEAD	__REG(0x4C000030) /* UHC Done Head */
+#define UHCFMI		__REG(0x4C000034) /* UHC Frame Interval */
+#define UHCFMR		__REG(0x4C000038) /* UHC Frame Remaining */
+#define UHCFMN		__REG(0x4C00003C) /* UHC Frame Number */
+#define UHCPERS		__REG(0x4C000040) /* UHC Periodic Start */
+#define UHCLS		__REG(0x4C000044) /* UHC Low Speed Threshold */
+
+#define UHCRHDA		__REG(0x4C000048) /* UHC Root Hub Descriptor A */
+#define UHCRHDA_NOCP	(1 << 12)	/* No over current protection */
+
+#define UHCRHDB		__REG(0x4C00004C) /* UHC Root Hub Descriptor B */
+#define UHCRHS		__REG(0x4C000050) /* UHC Root Hub Status */
+#define UHCRHPS1	__REG(0x4C000054) /* UHC Root Hub Port 1 Status */
+#define UHCRHPS2	__REG(0x4C000058) /* UHC Root Hub Port 2 Status */
+#define UHCRHPS3	__REG(0x4C00005C) /* UHC Root Hub Port 3 Status */
+
+#define UHCSTAT		__REG(0x4C000060) /* UHC Status Register */
+#define UHCSTAT_UPS3	(1 << 16)	/* USB Power Sense Port3 */
+#define UHCSTAT_SBMAI	(1 << 15)	/* System Bus Master Abort Interrupt*/
+#define UHCSTAT_SBTAI	(1 << 14)	/* System Bus Target Abort Interrupt*/
+#define UHCSTAT_UPRI	(1 << 13)	/* USB Port Resume Interrupt */
+#define UHCSTAT_UPS2	(1 << 12)	/* USB Power Sense Port 2 */
+#define UHCSTAT_UPS1	(1 << 11)	/* USB Power Sense Port 1 */
+#define UHCSTAT_HTA	(1 << 10)	/* HCI Target Abort */
+#define UHCSTAT_HBA	(1 << 8)	/* HCI Buffer Active */
+#define UHCSTAT_RWUE	(1 << 7)	/* HCI Remote Wake Up Event */
+
+#define UHCHR           __REG(0x4C000064) /* UHC Reset Register */
+#define UHCHR_SSEP3	(1 << 11)	/* Sleep Standby Enable for Port3 */
+#define UHCHR_SSEP2	(1 << 10)	/* Sleep Standby Enable for Port2 */
+#define UHCHR_SSEP1	(1 << 9)	/* Sleep Standby Enable for Port1 */
+#define UHCHR_PCPL	(1 << 7)	/* Power control polarity low */
+#define UHCHR_PSPL	(1 << 6)	/* Power sense polarity low */
+#define UHCHR_SSE	(1 << 5)	/* Sleep Standby Enable */
+#define UHCHR_UIT	(1 << 4)	/* USB Interrupt Test */
+#define UHCHR_SSDC	(1 << 3)	/* Simulation Scale Down Clock */
+#define UHCHR_CGR	(1 << 2)	/* Clock Generation Reset */
+#define UHCHR_FHR	(1 << 1)	/* Force Host Controller Reset */
+#define UHCHR_FSBIR	(1 << 0)	/* Force System Bus Iface Reset */
+
+#define UHCHIE          __REG(0x4C000068) /* UHC Interrupt Enable Register*/
+#define UHCHIE_UPS3IE	(1 << 14)	/* Power Sense Port3 IntEn */
+#define UHCHIE_UPRIE	(1 << 13)	/* Port Resume IntEn */
+#define UHCHIE_UPS2IE	(1 << 12)	/* Power Sense Port2 IntEn */
+#define UHCHIE_UPS1IE	(1 << 11)	/* Power Sense Port1 IntEn */
+#define UHCHIE_TAIE	(1 << 10)	/* HCI Interface Transfer Abort
+					   Interrupt Enable*/
+#define UHCHIE_HBAIE	(1 << 8)	/* HCI Buffer Active IntEn */
+#define UHCHIE_RWIE	(1 << 7)	/* Remote Wake-up IntEn */
+
+#define UHCHIT          __REG(0x4C00006C) /* UHC Interrupt Test register */
+
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
+
+/* PWRMODE register M field values */
+
+#define PWRMODE_IDLE		0x1
+#define PWRMODE_STANDBY		0x2
+#define PWRMODE_SLEEP		0x3
+#define PWRMODE_DEEPSLEEP	0x7
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
new file mode 100644
index 000000000000..1b80a4805a60
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
@@ -0,0 +1,163 @@
+#ifndef _ASM_ARCH_PXA25X_UDC_H
+#define _ASM_ARCH_PXA25X_UDC_H
+
+#ifdef _ASM_ARCH_PXA27X_UDC_H
+#error "You can't include both PXA25x and PXA27x UDC support"
+#endif
+
+#define UDC_RES1	__REG(0x40600004)  /* UDC Undocumented - Reserved1 */
+#define UDC_RES2	__REG(0x40600008)  /* UDC Undocumented - Reserved2 */
+#define UDC_RES3	__REG(0x4060000C)  /* UDC Undocumented - Reserved3 */
+
+#define UDCCR		__REG(0x40600000)  /* UDC Control Register */
+#define UDCCR_UDE	(1 << 0)	/* UDC enable */
+#define UDCCR_UDA	(1 << 1)	/* UDC active */
+#define UDCCR_RSM	(1 << 2)	/* Device resume */
+#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
+#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
+#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
+#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
+
+#define UDCCS0		__REG(0x40600010)  /* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
+#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
+#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
+#define UDCCS0_SST	(1 << 4)	/* Sent stall */
+#define UDCCS0_FST	(1 << 5)	/* Force stall */
+#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
+#define UDCCS0_SA	(1 << 7)	/* Setup active */
+
+/* Bulk IN - Endpoint 1,6,11 */
+#define UDCCS1		__REG(0x40600014)  /* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS6		__REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS11		__REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */
+
+#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
+
+/* Bulk OUT - Endpoint 2,7,12 */
+#define UDCCS2		__REG(0x40600018)  /* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS7		__REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS12		__REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */
+
+#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
+
+/* Isochronous IN - Endpoint 3,8,13 */
+#define UDCCS3		__REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS8		__REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS13		__REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */
+
+#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
+
+/* Isochronous OUT - Endpoint 4,9,14 */
+#define UDCCS4		__REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS9		__REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS14		__REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */
+
+#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_IO_ROF	(1 << 2)	/* Receive overflow */
+#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
+
+/* Interrupt IN - Endpoint 5,10,15 */
+#define UDCCS5		__REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS10		__REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS15		__REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */
+
+#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
+#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UFNRH		__REG(0x40600060)  /* UDC Frame Number Register High */
+#define UFNRL		__REG(0x40600064)  /* UDC Frame Number Register Low */
+#define UBCR2		__REG(0x40600068)  /* UDC Byte Count Reg 2 */
+#define UBCR4		__REG(0x4060006c)  /* UDC Byte Count Reg 4 */
+#define UBCR7		__REG(0x40600070)  /* UDC Byte Count Reg 7 */
+#define UBCR9		__REG(0x40600074)  /* UDC Byte Count Reg 9 */
+#define UBCR12		__REG(0x40600078)  /* UDC Byte Count Reg 12 */
+#define UBCR14		__REG(0x4060007c)  /* UDC Byte Count Reg 14 */
+#define UDDR0		__REG(0x40600080)  /* UDC Endpoint 0 Data Register */
+#define UDDR1		__REG(0x40600100)  /* UDC Endpoint 1 Data Register */
+#define UDDR2		__REG(0x40600180)  /* UDC Endpoint 2 Data Register */
+#define UDDR3		__REG(0x40600200)  /* UDC Endpoint 3 Data Register */
+#define UDDR4		__REG(0x40600400)  /* UDC Endpoint 4 Data Register */
+#define UDDR5		__REG(0x406000A0)  /* UDC Endpoint 5 Data Register */
+#define UDDR6		__REG(0x40600600)  /* UDC Endpoint 6 Data Register */
+#define UDDR7		__REG(0x40600680)  /* UDC Endpoint 7 Data Register */
+#define UDDR8		__REG(0x40600700)  /* UDC Endpoint 8 Data Register */
+#define UDDR9		__REG(0x40600900)  /* UDC Endpoint 9 Data Register */
+#define UDDR10		__REG(0x406000C0)  /* UDC Endpoint 10 Data Register */
+#define UDDR11		__REG(0x40600B00)  /* UDC Endpoint 11 Data Register */
+#define UDDR12		__REG(0x40600B80)  /* UDC Endpoint 12 Data Register */
+#define UDDR13		__REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
+#define UDDR14		__REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
+#define UDDR15		__REG(0x406000E0)  /* UDC Endpoint 15 Data Register */
+
+#define UICR0		__REG(0x40600050)  /* UDC Interrupt Control Register 0 */
+
+#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
+#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
+#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
+#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
+#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
+#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
+#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
+#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
+
+#define UICR1		__REG(0x40600054)  /* UDC Interrupt Control Register 1 */
+
+#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
+#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
+#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
+#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
+#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
+#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
+#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
+#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
+
+#define USIR0		__REG(0x40600058)  /* UDC Status Interrupt Register 0 */
+
+#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
+#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
+#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
+#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
+#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
+#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
+#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
+#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
+
+#define USIR1		__REG(0x4060005C)  /* UDC Status Interrupt Register 1 */
+
+#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
+#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
+#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
+#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
+#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
+#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
+#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
+#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
new file mode 100644
index 000000000000..ab1443f8bd89
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
@@ -0,0 +1,257 @@
+#ifndef _ASM_ARCH_PXA27X_UDC_H
+#define _ASM_ARCH_PXA27X_UDC_H
+
+#ifdef _ASM_ARCH_PXA25X_UDC_H
+#error You cannot include both PXA25x and PXA27x UDC support
+#endif
+
+#define UDCCR           __REG(0x40600000) /* UDC Control Register */
+#define UDCCR_OEN	(1 << 31)	/* On-the-Go Enable */
+#define UDCCR_AALTHNP	(1 << 30)	/* A-device Alternate Host Negotiation
+					   Protocol Port Support */
+#define UDCCR_AHNP	(1 << 29)	/* A-device Host Negotiation Protocol
+					   Support */
+#define UDCCR_BHNP	(1 << 28)	/* B-device Host Negotiation Protocol
+					   Enable */
+#define UDCCR_DWRE	(1 << 16)	/* Device Remote Wake-up Enable */
+#define UDCCR_ACN	(0x03 << 11)	/* Active UDC configuration Number */
+#define UDCCR_ACN_S	11
+#define UDCCR_AIN	(0x07 << 8)	/* Active UDC interface Number */
+#define UDCCR_AIN_S	8
+#define UDCCR_AAISN	(0x07 << 5)	/* Active UDC Alternate Interface
+					   Setting Number */
+#define UDCCR_AAISN_S	5
+#define UDCCR_SMAC	(1 << 4)	/* Switch Endpoint Memory to Active
+					   Configuration */
+#define UDCCR_EMCE	(1 << 3)	/* Endpoint Memory Configuration
+					   Error */
+#define UDCCR_UDR	(1 << 2)	/* UDC Resume */
+#define UDCCR_UDA	(1 << 1)	/* UDC Active */
+#define UDCCR_UDE	(1 << 0)	/* UDC Enable */
+
+#define UDCICR0         __REG(0x40600004) /* UDC Interrupt Control Register0 */
+#define UDCICR1         __REG(0x40600008) /* UDC Interrupt Control Register1 */
+#define UDCICR_FIFOERR	(1 << 1)	/* FIFO Error interrupt for EP */
+#define UDCICR_PKTCOMPL (1 << 0)	/* Packet Complete interrupt for EP */
+
+#define UDC_INT_FIFOERROR  (0x2)
+#define UDC_INT_PACKETCMP  (0x1)
+
+#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCICR1_IECC	(1 << 31)	/* IntEn - Configuration Change */
+#define UDCICR1_IESOF	(1 << 30)	/* IntEn - Start of Frame */
+#define UDCICR1_IERU	(1 << 29)	/* IntEn - Resume */
+#define UDCICR1_IESU	(1 << 28)	/* IntEn - Suspend */
+#define UDCICR1_IERS	(1 << 27)	/* IntEn - Reset */
+
+#define UDCISR0         __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
+#define UDCISR1         __REG(0x40600010) /* UDC Interrupt Status Register 1 */
+#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCISR1_IRCC	(1 << 31)	/* IntReq - Configuration Change */
+#define UDCISR1_IRSOF	(1 << 30)	/* IntReq - Start of Frame */
+#define UDCISR1_IRRU	(1 << 29)	/* IntReq - Resume */
+#define UDCISR1_IRSU	(1 << 28)	/* IntReq - Suspend */
+#define UDCISR1_IRRS	(1 << 27)	/* IntReq - Reset */
+
+#define UDCFNR          __REG(0x40600014) /* UDC Frame Number Register */
+#define UDCOTGICR	__REG(0x40600018) /* UDC On-The-Go interrupt control */
+#define UDCOTGICR_IESF	(1 << 24)	/* OTG SET_FEATURE command recvd */
+#define UDCOTGICR_IEXR	(1 << 17)	/* Extra Transciever Interrupt
+					   Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEXF	(1 << 16)	/* Extra Transciever Interrupt
+					   Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40R (1 << 9)	/* OTG Vbus Valid 4.0V Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV40F (1 << 8)	/* OTG Vbus Valid 4.0V Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV44R (1 << 7)	/* OTG Vbus Valid 4.4V Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV44F (1 << 6)	/* OTG Vbus Valid 4.4V Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESVR	(1 << 5)	/* OTG Session Valid Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESVF	(1 << 4)	/* OTG Session Valid Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESDR	(1 << 3)	/* OTG A-Device SRP Detect Rising
+					   Edge Interrupt Enable */
+#define UDCOTGICR_IESDF	(1 << 2)	/* OTG A-Device SRP Detect Falling
+					   Edge Interrupt Enable */
+#define UDCOTGICR_IEIDR	(1 << 1)	/* OTG ID Change Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEIDF	(1 << 0)	/* OTG ID Change Falling Edge
+					   Interrupt Enable */
+
+#define UP2OCR		  __REG(0x40600020)  /* USB Port 2 Output Control register */
+#define UP3OCR		  __REG(0x40600024)  /* USB Port 2 Output Control register */
+
+#define UP2OCR_CPVEN	(1 << 0)	/* Charge Pump Vbus Enable */
+#define UP2OCR_CPVPE	(1 << 1)	/* Charge Pump Vbus Pulse Enable */
+#define UP2OCR_DPPDE	(1 << 2)	/* Host Port 2 Transceiver D+ Pull Down Enable */
+#define UP2OCR_DMPDE	(1 << 3)	/* Host Port 2 Transceiver D- Pull Down Enable */
+#define UP2OCR_DPPUE	(1 << 4)	/* Host Port 2 Transceiver D+ Pull Up Enable */
+#define UP2OCR_DMPUE	(1 << 5)	/* Host Port 2 Transceiver D- Pull Up Enable */
+#define UP2OCR_DPPUBE	(1 << 6)	/* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
+#define UP2OCR_DMPUBE	(1 << 7)	/* Host Port 2 Transceiver D- Pull Up Bypass Enable */
+#define UP2OCR_EXSP		(1 << 8)	/* External Transceiver Speed Control */
+#define UP2OCR_EXSUS	(1 << 9)	/* External Transceiver Speed Enable */
+#define UP2OCR_IDON		(1 << 10)	/* OTG ID Read Enable */
+#define UP2OCR_HXS		(1 << 16)	/* Host Port 2 Transceiver Output Select */
+#define UP2OCR_HXOE		(1 << 17)	/* Host Port 2 Transceiver Output Enable */
+#define UP2OCR_SEOS(x)		((x & 7) << 24)	/* Single-Ended Output Select */
+
+#define UDCCSN(x)	__REG2(0x40600100, (x) << 2)
+#define UDCCSR0         __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
+#define UDCCSR0_SA	(1 << 7)	/* Setup Active */
+#define UDCCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
+#define UDCCSR0_FST	(1 << 5)	/* Force Stall */
+#define UDCCSR0_SST	(1 << 4)	/* Sent Stall */
+#define UDCCSR0_DME	(1 << 3)	/* DMA Enable */
+#define UDCCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
+#define UDCCSR0_IPR	(1 << 1)	/* IN Packet Ready */
+#define UDCCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
+
+#define UDCCSRA         __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
+#define UDCCSRB         __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
+#define UDCCSRC         __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
+#define UDCCSRD         __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
+#define UDCCSRE         __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
+#define UDCCSRF         __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
+#define UDCCSRG         __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
+#define UDCCSRH         __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
+#define UDCCSRI         __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
+#define UDCCSRJ         __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
+#define UDCCSRK         __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
+#define UDCCSRL         __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
+#define UDCCSRM         __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
+#define UDCCSRN         __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
+#define UDCCSRP         __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
+#define UDCCSRQ         __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
+#define UDCCSRR         __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
+#define UDCCSRS         __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
+#define UDCCSRT         __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
+#define UDCCSRU         __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
+#define UDCCSRV         __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
+#define UDCCSRW         __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
+#define UDCCSRX         __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
+
+#define UDCCSR_DPE	(1 << 9)	/* Data Packet Error */
+#define UDCCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
+#define UDCCSR_SP	(1 << 7)	/* Short Packet Control/Status */
+#define UDCCSR_BNE	(1 << 6)	/* Buffer Not Empty (IN endpoints) */
+#define UDCCSR_BNF	(1 << 6)	/* Buffer Not Full (OUT endpoints) */
+#define UDCCSR_FST	(1 << 5)	/* Force STALL */
+#define UDCCSR_SST	(1 << 4)	/* Sent STALL */
+#define UDCCSR_DME	(1 << 3)	/* DMA Enable */
+#define UDCCSR_TRN	(1 << 2)	/* Tx/Rx NAK */
+#define UDCCSR_PC	(1 << 1)	/* Packet Complete */
+#define UDCCSR_FS	(1 << 0)	/* FIFO needs service */
+
+#define UDCBCN(x)	__REG2(0x40600200, (x)<<2)
+#define UDCBCR0         __REG(0x40600200) /* Byte Count Register - EP0 */
+#define UDCBCRA         __REG(0x40600204) /* Byte Count Register - EPA */
+#define UDCBCRB         __REG(0x40600208) /* Byte Count Register - EPB */
+#define UDCBCRC         __REG(0x4060020C) /* Byte Count Register - EPC */
+#define UDCBCRD         __REG(0x40600210) /* Byte Count Register - EPD */
+#define UDCBCRE         __REG(0x40600214) /* Byte Count Register - EPE */
+#define UDCBCRF         __REG(0x40600218) /* Byte Count Register - EPF */
+#define UDCBCRG         __REG(0x4060021C) /* Byte Count Register - EPG */
+#define UDCBCRH         __REG(0x40600220) /* Byte Count Register - EPH */
+#define UDCBCRI         __REG(0x40600224) /* Byte Count Register - EPI */
+#define UDCBCRJ         __REG(0x40600228) /* Byte Count Register - EPJ */
+#define UDCBCRK         __REG(0x4060022C) /* Byte Count Register - EPK */
+#define UDCBCRL         __REG(0x40600230) /* Byte Count Register - EPL */
+#define UDCBCRM         __REG(0x40600234) /* Byte Count Register - EPM */
+#define UDCBCRN         __REG(0x40600238) /* Byte Count Register - EPN */
+#define UDCBCRP         __REG(0x4060023C) /* Byte Count Register - EPP */
+#define UDCBCRQ         __REG(0x40600240) /* Byte Count Register - EPQ */
+#define UDCBCRR         __REG(0x40600244) /* Byte Count Register - EPR */
+#define UDCBCRS         __REG(0x40600248) /* Byte Count Register - EPS */
+#define UDCBCRT         __REG(0x4060024C) /* Byte Count Register - EPT */
+#define UDCBCRU         __REG(0x40600250) /* Byte Count Register - EPU */
+#define UDCBCRV         __REG(0x40600254) /* Byte Count Register - EPV */
+#define UDCBCRW         __REG(0x40600258) /* Byte Count Register - EPW */
+#define UDCBCRX         __REG(0x4060025C) /* Byte Count Register - EPX */
+
+#define UDCDN(x)	__REG2(0x40600300, (x)<<2)
+#define PHYS_UDCDN(x)	(0x40600300 + ((x)<<2))
+#define PUDCDN(x)	(volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
+#define UDCDR0          __REG(0x40600300) /* Data Register - EP0 */
+#define UDCDRA          __REG(0x40600304) /* Data Register - EPA */
+#define UDCDRB          __REG(0x40600308) /* Data Register - EPB */
+#define UDCDRC          __REG(0x4060030C) /* Data Register - EPC */
+#define UDCDRD          __REG(0x40600310) /* Data Register - EPD */
+#define UDCDRE          __REG(0x40600314) /* Data Register - EPE */
+#define UDCDRF          __REG(0x40600318) /* Data Register - EPF */
+#define UDCDRG          __REG(0x4060031C) /* Data Register - EPG */
+#define UDCDRH          __REG(0x40600320) /* Data Register - EPH */
+#define UDCDRI          __REG(0x40600324) /* Data Register - EPI */
+#define UDCDRJ          __REG(0x40600328) /* Data Register - EPJ */
+#define UDCDRK          __REG(0x4060032C) /* Data Register - EPK */
+#define UDCDRL          __REG(0x40600330) /* Data Register - EPL */
+#define UDCDRM          __REG(0x40600334) /* Data Register - EPM */
+#define UDCDRN          __REG(0x40600338) /* Data Register - EPN */
+#define UDCDRP          __REG(0x4060033C) /* Data Register - EPP */
+#define UDCDRQ          __REG(0x40600340) /* Data Register - EPQ */
+#define UDCDRR          __REG(0x40600344) /* Data Register - EPR */
+#define UDCDRS          __REG(0x40600348) /* Data Register - EPS */
+#define UDCDRT          __REG(0x4060034C) /* Data Register - EPT */
+#define UDCDRU          __REG(0x40600350) /* Data Register - EPU */
+#define UDCDRV          __REG(0x40600354) /* Data Register - EPV */
+#define UDCDRW          __REG(0x40600358) /* Data Register - EPW */
+#define UDCDRX          __REG(0x4060035C) /* Data Register - EPX */
+
+#define UDCCN(x)       __REG2(0x40600400, (x)<<2)
+#define UDCCRA          __REG(0x40600404) /* Configuration register EPA */
+#define UDCCRB          __REG(0x40600408) /* Configuration register EPB */
+#define UDCCRC          __REG(0x4060040C) /* Configuration register EPC */
+#define UDCCRD          __REG(0x40600410) /* Configuration register EPD */
+#define UDCCRE          __REG(0x40600414) /* Configuration register EPE */
+#define UDCCRF          __REG(0x40600418) /* Configuration register EPF */
+#define UDCCRG          __REG(0x4060041C) /* Configuration register EPG */
+#define UDCCRH          __REG(0x40600420) /* Configuration register EPH */
+#define UDCCRI          __REG(0x40600424) /* Configuration register EPI */
+#define UDCCRJ          __REG(0x40600428) /* Configuration register EPJ */
+#define UDCCRK          __REG(0x4060042C) /* Configuration register EPK */
+#define UDCCRL          __REG(0x40600430) /* Configuration register EPL */
+#define UDCCRM          __REG(0x40600434) /* Configuration register EPM */
+#define UDCCRN          __REG(0x40600438) /* Configuration register EPN */
+#define UDCCRP          __REG(0x4060043C) /* Configuration register EPP */
+#define UDCCRQ          __REG(0x40600440) /* Configuration register EPQ */
+#define UDCCRR          __REG(0x40600444) /* Configuration register EPR */
+#define UDCCRS          __REG(0x40600448) /* Configuration register EPS */
+#define UDCCRT          __REG(0x4060044C) /* Configuration register EPT */
+#define UDCCRU          __REG(0x40600450) /* Configuration register EPU */
+#define UDCCRV          __REG(0x40600454) /* Configuration register EPV */
+#define UDCCRW          __REG(0x40600458) /* Configuration register EPW */
+#define UDCCRX          __REG(0x4060045C) /* Configuration register EPX */
+
+#define UDCCONR_CN	(0x03 << 25)	/* Configuration Number */
+#define UDCCONR_CN_S	(25)
+#define UDCCONR_IN	(0x07 << 22)	/* Interface Number */
+#define UDCCONR_IN_S	(22)
+#define UDCCONR_AISN	(0x07 << 19)	/* Alternate Interface Number */
+#define UDCCONR_AISN_S	(19)
+#define UDCCONR_EN	(0x0f << 15)	/* Endpoint Number */
+#define UDCCONR_EN_S	(15)
+#define UDCCONR_ET	(0x03 << 13)	/* Endpoint Type: */
+#define UDCCONR_ET_S	(13)
+#define UDCCONR_ET_INT	(0x03 << 13)	/*   Interrupt */
+#define UDCCONR_ET_BULK	(0x02 << 13)	/*   Bulk */
+#define UDCCONR_ET_ISO	(0x01 << 13)	/*   Isochronous */
+#define UDCCONR_ET_NU	(0x00 << 13)	/*   Not used */
+#define UDCCONR_ED	(1 << 12)	/* Endpoint Direction */
+#define UDCCONR_MPS	(0x3ff << 2)	/* Maximum Packet Size */
+#define UDCCONR_MPS_S	(2)
+#define UDCCONR_DE	(1 << 1)	/* Double Buffering Enable */
+#define UDCCONR_EE	(1 << 0)	/* Endpoint Enable */
+
+
+#define UDC_INT_FIFOERROR  (0x2)
+#define UDC_INT_PACKETCMP  (0x1)
+
+#define UDC_FNR_MASK     (0x7ff)
+
+#define UDCCSR_WR_MASK   (UDCCSR_DME|UDCCSR_FST)
+#define UDC_BCR_MASK    (0x3ff)
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
new file mode 100644
index 000000000000..d5a48a96dea7
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
@@ -0,0 +1,58 @@
+#ifndef __ASM_ARCH_PXA27x_KEYPAD_H
+#define __ASM_ARCH_PXA27x_KEYPAD_H
+
+#include <linux/input.h>
+
+#define MAX_MATRIX_KEY_ROWS	(8)
+#define MAX_MATRIX_KEY_COLS	(8)
+
+/* pxa3xx keypad platform specific parameters
+ *
+ * NOTE:
+ * 1. direct_key_num indicates the number of keys in the direct keypad
+ *    _plus_ the number of rotary-encoder sensor inputs,  this can be
+ *    left as 0 if only rotary encoders are enabled,  the driver will
+ *    automatically calculate this
+ *
+ * 2. direct_key_map is the key code map for the direct keys, if rotary
+ *    encoder(s) are enabled, direct key 0/1(2/3) will be ignored
+ *
+ * 3. rotary can be either interpreted as a relative input event (e.g.
+ *    REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT)
+ *
+ * 4. matrix key and direct key will use the same debounce_interval by
+ *    default, which should be sufficient in most cases
+ */
+struct pxa27x_keypad_platform_data {
+
+	/* code map for the matrix keys */
+	unsigned int	matrix_key_rows;
+	unsigned int	matrix_key_cols;
+	unsigned int	*matrix_key_map;
+	int		matrix_key_map_size;
+
+	/* direct keys */
+	int		direct_key_num;
+	unsigned int	direct_key_map[8];
+
+	/* rotary encoders 0 */
+	int		enable_rotary0;
+	int		rotary0_rel_code;
+	int		rotary0_up_key;
+	int		rotary0_down_key;
+
+	/* rotary encoders 1 */
+	int		enable_rotary1;
+	int		rotary1_rel_code;
+	int		rotary1_up_key;
+	int		rotary1_down_key;
+
+	/* key debounce interval */
+	unsigned int	debounce_interval;
+};
+
+#define KEY(row, col, val)	(((row) << 28) | ((col) << 24) | (val))
+
+extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
+
+#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
new file mode 100644
index 000000000000..6ef1dd09970b
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
@@ -0,0 +1,368 @@
+#ifndef __ASM_ARCH_PXA2XX_GPIO_H
+#define __ASM_ARCH_PXA2XX_GPIO_H
+
+#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h
+
+/* GPIO alternate function assignments */
+
+#define GPIO1_RST		1	/* reset */
+#define GPIO6_MMCCLK		6	/* MMC Clock */
+#define GPIO7_48MHz		7	/* 48 MHz clock output */
+#define GPIO8_MMCCS0		8	/* MMC Chip Select 0 */
+#define GPIO9_MMCCS1		9	/* MMC Chip Select 1 */
+#define GPIO10_RTCCLK		10	/* real time clock (1 Hz) */
+#define GPIO11_3_6MHz		11	/* 3.6 MHz oscillator out */
+#define GPIO12_32KHz		12	/* 32 kHz out */
+#define GPIO12_CIF_DD_7		12	/* Camera data pin 7 */
+#define GPIO13_MBGNT		13	/* memory controller grant */
+#define GPIO14_MBREQ		14	/* alternate bus master request */
+#define GPIO15_nCS_1		15	/* chip select 1 */
+#define GPIO16_PWM0		16	/* PWM0 output */
+#define GPIO17_PWM1		17	/* PWM1 output */
+#define GPIO17_CIF_DD_6		17	/* Camera data pin 6 */
+#define GPIO18_RDY		18	/* Ext. Bus Ready */
+#define GPIO19_DREQ1		19	/* External DMA Request */
+#define GPIO20_DREQ0		20	/* External DMA Request */
+#define GPIO23_SCLK		23	/* SSP clock */
+#define GPIO23_CIF_MCLK		23	/* Camera Master Clock */
+#define GPIO24_SFRM		24	/* SSP Frame */
+#define GPIO24_CIF_FV		24	/* Camera frame start signal */
+#define GPIO25_STXD		25	/* SSP transmit */
+#define GPIO25_CIF_LV		25	/* Camera line start signal */
+#define GPIO26_SRXD		26	/* SSP receive */
+#define GPIO26_CIF_PCLK		26	/* Camera Pixel Clock */
+#define GPIO27_SEXTCLK		27	/* SSP ext_clk */
+#define GPIO27_CIF_DD_0		27	/* Camera data pin 0 */
+#define GPIO28_BITCLK		28	/* AC97/I2S bit_clk */
+#define GPIO29_SDATA_IN		29	/* AC97 Sdata_in0 / I2S Sdata_in */
+#define GPIO30_SDATA_OUT	30	/* AC97/I2S Sdata_out */
+#define GPIO31_SYNC		31	/* AC97/I2S sync */
+#define GPIO32_SDATA_IN1	32	/* AC97 Sdata_in1 */
+#define GPIO32_SYSCLK		32	/* I2S System Clock */
+#define GPIO32_MMCCLK		32	/* MMC Clock (PXA270) */
+#define GPIO33_nCS_5		33	/* chip select 5 */
+#define GPIO34_FFRXD		34	/* FFUART receive */
+#define GPIO34_MMCCS0		34	/* MMC Chip Select 0 */
+#define GPIO35_FFCTS		35	/* FFUART Clear to send */
+#define GPIO36_FFDCD		36	/* FFUART Data carrier detect */
+#define GPIO37_FFDSR		37	/* FFUART data set ready */
+#define GPIO38_FFRI		38	/* FFUART Ring Indicator */
+#define GPIO39_MMCCS1		39	/* MMC Chip Select 1 */
+#define GPIO39_FFTXD		39	/* FFUART transmit data */
+#define GPIO40_FFDTR		40	/* FFUART data terminal Ready */
+#define GPIO41_FFRTS		41	/* FFUART request to send */
+#define GPIO42_BTRXD		42	/* BTUART receive data */
+#define GPIO42_HWRXD		42	/* HWUART receive data */
+#define GPIO42_CIF_MCLK		42	/* Camera Master Clock */
+#define GPIO43_BTTXD		43	/* BTUART transmit data */
+#define GPIO43_HWTXD		43	/* HWUART transmit data */
+#define GPIO43_CIF_FV		43	/* Camera frame start signal */
+#define GPIO44_BTCTS		44	/* BTUART clear to send */
+#define GPIO44_HWCTS		44	/* HWUART clear to send */
+#define GPIO44_CIF_LV		44	/* Camera line start signal */
+#define GPIO45_BTRTS		45	/* BTUART request to send */
+#define GPIO45_HWRTS		45	/* HWUART request to send */
+#define GPIO45_AC97_SYSCLK	45	/* AC97 System Clock */
+#define GPIO45_CIF_PCLK		45	/* Camera Pixel Clock */
+#define GPIO46_ICPRXD		46	/* ICP receive data */
+#define GPIO46_STRXD		46	/* STD_UART receive data */
+#define GPIO47_ICPTXD		47	/* ICP transmit data */
+#define GPIO47_STTXD		47	/* STD_UART transmit data */
+#define GPIO47_CIF_DD_0		47	/* Camera data pin 0 */
+#define GPIO48_nPOE		48	/* Output Enable for Card Space */
+#define GPIO48_CIF_DD_5		48	/* Camera data pin 5 */
+#define GPIO49_nPWE		49	/* Write Enable for Card Space */
+#define GPIO50_nPIOR		50	/* I/O Read for Card Space */
+#define GPIO50_CIF_DD_3		50	/* Camera data pin 3 */
+#define GPIO51_nPIOW		51	/* I/O Write for Card Space */
+#define GPIO51_CIF_DD_2		51	/* Camera data pin 2 */
+#define GPIO52_nPCE_1		52	/* Card Enable for Card Space */
+#define GPIO52_CIF_DD_4		52	/* Camera data pin 4 */
+#define GPIO53_nPCE_2		53	/* Card Enable for Card Space */
+#define GPIO53_MMCCLK		53	/* MMC Clock */
+#define GPIO53_CIF_MCLK		53	/* Camera Master Clock */
+#define GPIO54_MMCCLK		54	/* MMC Clock */
+#define GPIO54_pSKTSEL		54	/* Socket Select for Card Space */
+#define GPIO54_nPCE_2		54	/* Card Enable for Card Space (PXA27x) */
+#define GPIO54_CIF_PCLK		54	/* Camera Pixel Clock */
+#define GPIO55_nPREG		55	/* Card Address bit 26 */
+#define GPIO55_CIF_DD_1		55	/* Camera data pin 1 */
+#define GPIO56_nPWAIT		56	/* Wait signal for Card Space */
+#define GPIO57_nIOIS16		57	/* Bus Width select for I/O Card Space */
+#define GPIO58_LDD_0		58	/* LCD data pin 0 */
+#define GPIO59_LDD_1		59	/* LCD data pin 1 */
+#define GPIO60_LDD_2		60	/* LCD data pin 2 */
+#define GPIO61_LDD_3		61	/* LCD data pin 3 */
+#define GPIO62_LDD_4		62	/* LCD data pin 4 */
+#define GPIO63_LDD_5		63	/* LCD data pin 5 */
+#define GPIO64_LDD_6		64	/* LCD data pin 6 */
+#define GPIO65_LDD_7		65	/* LCD data pin 7 */
+#define GPIO66_LDD_8		66	/* LCD data pin 8 */
+#define GPIO66_MBREQ		66	/* alternate bus master req */
+#define GPIO67_LDD_9		67	/* LCD data pin 9 */
+#define GPIO67_MMCCS0		67	/* MMC Chip Select 0 */
+#define GPIO68_LDD_10		68	/* LCD data pin 10 */
+#define GPIO68_MMCCS1		68	/* MMC Chip Select 1 */
+#define GPIO69_LDD_11		69	/* LCD data pin 11 */
+#define GPIO69_MMCCLK		69	/* MMC_CLK */
+#define GPIO70_LDD_12		70	/* LCD data pin 12 */
+#define GPIO70_RTCCLK		70	/* Real Time clock (1 Hz) */
+#define GPIO71_LDD_13		71	/* LCD data pin 13 */
+#define GPIO71_3_6MHz		71	/* 3.6 MHz Oscillator clock */
+#define GPIO72_LDD_14		72	/* LCD data pin 14 */
+#define GPIO72_32kHz		72	/* 32 kHz clock */
+#define GPIO73_LDD_15		73	/* LCD data pin 15 */
+#define GPIO73_MBGNT		73	/* Memory controller grant */
+#define GPIO74_LCD_FCLK		74	/* LCD Frame clock */
+#define GPIO75_LCD_LCLK		75	/* LCD line clock */
+#define GPIO76_LCD_PCLK		76	/* LCD Pixel clock */
+#define GPIO77_LCD_ACBIAS	77	/* LCD AC Bias */
+#define GPIO78_nCS_2		78	/* chip select 2 */
+#define GPIO79_nCS_3		79	/* chip select 3 */
+#define GPIO80_nCS_4		80	/* chip select 4 */
+#define GPIO81_NSCLK		81	/* NSSP clock */
+#define GPIO81_CIF_DD_0		81	/* Camera data pin 0 */
+#define GPIO82_NSFRM		82	/* NSSP Frame */
+#define GPIO82_CIF_DD_5		82	/* Camera data pin 5 */
+#define GPIO83_NSTXD		83	/* NSSP transmit */
+#define GPIO83_CIF_DD_4		83	/* Camera data pin 4 */
+#define GPIO84_NSRXD		84	/* NSSP receive */
+#define GPIO84_CIF_FV		84	/* Camera frame start signal */
+#define GPIO85_nPCE_1		85	/* Card Enable for Card Space (PXA27x) */
+#define GPIO85_CIF_LV		85	/* Camera line start signal */
+#define GPIO90_CIF_DD_4		90	/* Camera data pin 4 */
+#define GPIO91_CIF_DD_5		91	/* Camera data pin 5 */
+#define GPIO92_MMCDAT0		92	/* MMC DAT0 (PXA27x) */
+#define GPIO93_CIF_DD_6		93	/* Camera data pin 6 */
+#define GPIO94_CIF_DD_5		94	/* Camera data pin 5 */
+#define GPIO95_CIF_DD_4		95	/* Camera data pin 4 */
+#define GPIO96_FFRXD		96	/* FFUART recieve */
+#define GPIO98_FFRTS		98	/* FFUART request to send */
+#define GPIO98_CIF_DD_0		98	/* Camera data pin 0 */
+#define GPIO99_FFTXD		99	/* FFUART transmit data */
+#define GPIO100_FFCTS		100	/* FFUART Clear to send */
+#define GPIO102_nPCE_1		102	/* PCMCIA (PXA27x) */
+#define GPIO103_CIF_DD_3	103	/* Camera data pin 3 */
+#define GPIO104_CIF_DD_2	104	/* Camera data pin 2 */
+#define GPIO105_CIF_DD_1	105	/* Camera data pin 1 */
+#define GPIO106_CIF_DD_9	106	/* Camera data pin 9 */
+#define GPIO107_CIF_DD_8	107	/* Camera data pin 8 */
+#define GPIO108_CIF_DD_7	108	/* Camera data pin 7 */
+#define GPIO109_MMCDAT1		109	/* MMC DAT1 (PXA27x) */
+#define GPIO110_MMCDAT2		110	/* MMC DAT2 (PXA27x) */
+#define GPIO110_MMCCS0		110	/* MMC Chip Select 0 (PXA27x) */
+#define GPIO111_MMCDAT3		111	/* MMC DAT3 (PXA27x) */
+#define GPIO111_MMCCS1		111	/* MMC Chip Select 1 (PXA27x) */
+#define GPIO112_MMCCMD		112	/* MMC CMD (PXA27x) */
+#define GPIO113_I2S_SYSCLK	113	/* I2S System Clock (PXA27x) */
+#define GPIO113_AC97_RESET_N	113	/* AC97 NRESET on (PXA27x) */
+#define GPIO114_CIF_DD_1	114	/* Camera data pin 1 */
+#define GPIO115_CIF_DD_3	115	/* Camera data pin 3 */
+#define GPIO116_CIF_DD_2	116	/* Camera data pin 2 */
+
+/* GPIO alternate function mode & direction */
+
+#define GPIO_IN			0x000
+#define GPIO_OUT		0x080
+#define GPIO_ALT_FN_1_IN	0x100
+#define GPIO_ALT_FN_1_OUT	0x180
+#define GPIO_ALT_FN_2_IN	0x200
+#define GPIO_ALT_FN_2_OUT	0x280
+#define GPIO_ALT_FN_3_IN	0x300
+#define GPIO_ALT_FN_3_OUT	0x380
+#define GPIO_MD_MASK_NR		0x07f
+#define GPIO_MD_MASK_DIR	0x080
+#define GPIO_MD_MASK_FN		0x300
+#define GPIO_DFLT_LOW		0x400
+#define GPIO_DFLT_HIGH		0x800
+
+#define GPIO1_RTS_MD		( 1 | GPIO_ALT_FN_1_IN)
+#define GPIO6_MMCCLK_MD		( 6 | GPIO_ALT_FN_1_OUT)
+#define GPIO7_48MHz_MD		( 7 | GPIO_ALT_FN_1_OUT)
+#define GPIO8_MMCCS0_MD		( 8 | GPIO_ALT_FN_1_OUT)
+#define GPIO9_MMCCS1_MD		( 9 | GPIO_ALT_FN_1_OUT)
+#define GPIO10_RTCCLK_MD	(10 | GPIO_ALT_FN_1_OUT)
+#define GPIO11_3_6MHz_MD	(11 | GPIO_ALT_FN_1_OUT)
+#define GPIO12_32KHz_MD		(12 | GPIO_ALT_FN_1_OUT)
+#define GPIO12_CIF_DD_7_MD	(12 | GPIO_ALT_FN_2_IN)
+#define GPIO13_MBGNT_MD		(13 | GPIO_ALT_FN_2_OUT)
+#define GPIO14_MBREQ_MD		(14 | GPIO_ALT_FN_1_IN)
+#define GPIO15_nCS_1_MD		(15 | GPIO_ALT_FN_2_OUT)
+#define GPIO16_PWM0_MD		(16 | GPIO_ALT_FN_2_OUT)
+#define GPIO17_PWM1_MD		(17 | GPIO_ALT_FN_2_OUT)
+#define GPIO17_CIF_DD_6_MD	(17 | GPIO_ALT_FN_2_IN)
+#define GPIO18_RDY_MD		(18 | GPIO_ALT_FN_1_IN)
+#define GPIO19_DREQ1_MD		(19 | GPIO_ALT_FN_1_IN)
+#define GPIO20_DREQ0_MD		(20 | GPIO_ALT_FN_1_IN)
+#define GPIO23_CIF_MCLK_MD	(23 | GPIO_ALT_FN_1_OUT)
+#define GPIO23_SCLK_MD		(23 | GPIO_ALT_FN_2_OUT)
+#define GPIO24_CIF_FV_MD	(24 | GPIO_ALT_FN_1_OUT)
+#define GPIO24_SFRM_MD		(24 | GPIO_ALT_FN_2_OUT)
+#define GPIO25_CIF_LV_MD	(25 | GPIO_ALT_FN_1_OUT)
+#define GPIO25_STXD_MD		(25 | GPIO_ALT_FN_2_OUT)
+#define GPIO26_SRXD_MD		(26 | GPIO_ALT_FN_1_IN)
+#define GPIO26_CIF_PCLK_MD	(26 | GPIO_ALT_FN_2_IN)
+#define GPIO27_SEXTCLK_MD	(27 | GPIO_ALT_FN_1_IN)
+#define GPIO27_CIF_DD_0_MD	(27 | GPIO_ALT_FN_3_IN)
+#define GPIO28_BITCLK_AC97_MD	(28 | GPIO_ALT_FN_1_IN)
+#define GPIO28_BITCLK_IN_I2S_MD	(28 | GPIO_ALT_FN_2_IN)
+#define GPIO28_BITCLK_OUT_I2S_MD	(28 | GPIO_ALT_FN_1_OUT)
+#define GPIO29_SDATA_IN_AC97_MD	(29 | GPIO_ALT_FN_1_IN)
+#define GPIO29_SDATA_IN_I2S_MD	(29 | GPIO_ALT_FN_2_IN)
+#define GPIO30_SDATA_OUT_AC97_MD	(30 | GPIO_ALT_FN_2_OUT)
+#define GPIO30_SDATA_OUT_I2S_MD	(30 | GPIO_ALT_FN_1_OUT)
+#define GPIO31_SYNC_I2S_MD	(31 | GPIO_ALT_FN_1_OUT)
+#define GPIO31_SYNC_AC97_MD	(31 | GPIO_ALT_FN_2_OUT)
+#define GPIO32_SDATA_IN1_AC97_MD	(32 | GPIO_ALT_FN_1_IN)
+#define GPIO32_SYSCLK_I2S_MD	(32 | GPIO_ALT_FN_1_OUT)
+#define GPIO32_MMCCLK_MD	(32 | GPIO_ALT_FN_2_OUT)
+#define GPIO33_nCS_5_MD		(33 | GPIO_ALT_FN_2_OUT)
+#define GPIO34_FFRXD_MD		(34 | GPIO_ALT_FN_1_IN)
+#define GPIO34_MMCCS0_MD	(34 | GPIO_ALT_FN_2_OUT)
+#define GPIO35_FFCTS_MD		(35 | GPIO_ALT_FN_1_IN)
+#define GPIO35_KP_MKOUT6_MD	(35 | GPIO_ALT_FN_2_OUT)
+#define GPIO36_FFDCD_MD		(36 | GPIO_ALT_FN_1_IN)
+#define GPIO37_FFDSR_MD		(37 | GPIO_ALT_FN_1_IN)
+#define GPIO38_FFRI_MD		(38 | GPIO_ALT_FN_1_IN)
+#define GPIO39_MMCCS1_MD	(39 | GPIO_ALT_FN_1_OUT)
+#define GPIO39_FFTXD_MD		(39 | GPIO_ALT_FN_2_OUT)
+#define GPIO40_FFDTR_MD		(40 | GPIO_ALT_FN_2_OUT)
+#define GPIO41_FFRTS_MD		(41 | GPIO_ALT_FN_2_OUT)
+#define GPIO41_KP_MKOUT7_MD	(41 | GPIO_ALT_FN_1_OUT)
+#define GPIO42_BTRXD_MD		(42 | GPIO_ALT_FN_1_IN)
+#define GPIO42_HWRXD_MD		(42 | GPIO_ALT_FN_3_IN)
+#define GPIO42_CIF_MCLK_MD	(42 | GPIO_ALT_FN_3_OUT)
+#define GPIO43_BTTXD_MD		(43 | GPIO_ALT_FN_2_OUT)
+#define GPIO43_HWTXD_MD		(43 | GPIO_ALT_FN_3_OUT)
+#define GPIO43_CIF_FV_MD	(43 | GPIO_ALT_FN_3_OUT)
+#define GPIO44_BTCTS_MD		(44 | GPIO_ALT_FN_1_IN)
+#define GPIO44_HWCTS_MD		(44 | GPIO_ALT_FN_3_IN)
+#define GPIO44_CIF_LV_MD	(44 | GPIO_ALT_FN_3_OUT)
+#define GPIO45_CIF_PCLK_MD	(45 | GPIO_ALT_FN_3_IN)
+#define GPIO45_BTRTS_MD		(45 | GPIO_ALT_FN_2_OUT)
+#define GPIO45_HWRTS_MD		(45 | GPIO_ALT_FN_3_OUT)
+#define GPIO45_SYSCLK_AC97_MD	(45 | GPIO_ALT_FN_1_OUT)
+#define GPIO46_ICPRXD_MD	(46 | GPIO_ALT_FN_1_IN)
+#define GPIO46_STRXD_MD		(46 | GPIO_ALT_FN_2_IN)
+#define GPIO47_CIF_DD_0_MD	(47 | GPIO_ALT_FN_1_IN)
+#define GPIO47_ICPTXD_MD	(47 | GPIO_ALT_FN_2_OUT)
+#define GPIO47_STTXD_MD		(47 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_CIF_DD_5_MD	(48 | GPIO_ALT_FN_1_IN)
+#define GPIO48_nPOE_MD		(48 | GPIO_ALT_FN_2_OUT)
+#define GPIO48_HWTXD_MD		(48 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_nPOE_MD		(48 | GPIO_ALT_FN_2_OUT)
+#define GPIO49_HWRXD_MD		(49 | GPIO_ALT_FN_1_IN)
+#define GPIO49_nPWE_MD		(49 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_CIF_DD_3_MD	(50 | GPIO_ALT_FN_1_IN)
+#define GPIO50_nPIOR_MD		(50 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_HWCTS_MD		(50 | GPIO_ALT_FN_1_IN)
+#define GPIO50_CIF_DD_3_MD	(50 | GPIO_ALT_FN_1_IN)
+#define GPIO51_CIF_DD_2_MD	(51 | GPIO_ALT_FN_1_IN)
+#define GPIO51_nPIOW_MD		(51 | GPIO_ALT_FN_2_OUT)
+#define GPIO51_HWRTS_MD		(51 | GPIO_ALT_FN_1_OUT)
+#define GPIO51_CIF_DD_2_MD	(51 | GPIO_ALT_FN_1_IN)
+#define GPIO52_nPCE_1_MD	(52 | GPIO_ALT_FN_2_OUT)
+#define GPIO52_CIF_DD_4_MD	(52 | GPIO_ALT_FN_1_IN)
+#define GPIO53_nPCE_2_MD	(53 | GPIO_ALT_FN_2_OUT)
+#define GPIO53_MMCCLK_MD	(53 | GPIO_ALT_FN_1_OUT)
+#define GPIO53_CIF_MCLK_MD	(53 | GPIO_ALT_FN_2_OUT)
+#define GPIO54_MMCCLK_MD	(54 | GPIO_ALT_FN_1_OUT)
+#define GPIO54_nPCE_2_MD	(54 | GPIO_ALT_FN_2_OUT)
+#define GPIO54_pSKTSEL_MD	(54 | GPIO_ALT_FN_2_OUT)
+#define GPIO54_CIF_PCLK_MD	(54 | GPIO_ALT_FN_3_IN)
+#define GPIO55_nPREG_MD		(55 | GPIO_ALT_FN_2_OUT)
+#define GPIO55_CIF_DD_1_MD	(55 | GPIO_ALT_FN_1_IN)
+#define GPIO56_nPWAIT_MD	(56 | GPIO_ALT_FN_1_IN)
+#define GPIO57_nIOIS16_MD	(57 | GPIO_ALT_FN_1_IN)
+#define GPIO58_LDD_0_MD		(58 | GPIO_ALT_FN_2_OUT)
+#define GPIO59_LDD_1_MD		(59 | GPIO_ALT_FN_2_OUT)
+#define GPIO60_LDD_2_MD		(60 | GPIO_ALT_FN_2_OUT)
+#define GPIO61_LDD_3_MD		(61 | GPIO_ALT_FN_2_OUT)
+#define GPIO62_LDD_4_MD		(62 | GPIO_ALT_FN_2_OUT)
+#define GPIO63_LDD_5_MD		(63 | GPIO_ALT_FN_2_OUT)
+#define GPIO64_LDD_6_MD		(64 | GPIO_ALT_FN_2_OUT)
+#define GPIO65_LDD_7_MD		(65 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_LDD_8_MD		(66 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_MBREQ_MD		(66 | GPIO_ALT_FN_1_IN)
+#define GPIO67_LDD_9_MD		(67 | GPIO_ALT_FN_2_OUT)
+#define GPIO67_MMCCS0_MD	(67 | GPIO_ALT_FN_1_OUT)
+#define GPIO68_LDD_10_MD	(68 | GPIO_ALT_FN_2_OUT)
+#define GPIO68_MMCCS1_MD	(68 | GPIO_ALT_FN_1_OUT)
+#define GPIO69_LDD_11_MD	(69 | GPIO_ALT_FN_2_OUT)
+#define GPIO69_MMCCLK_MD	(69 | GPIO_ALT_FN_1_OUT)
+#define GPIO70_LDD_12_MD	(70 | GPIO_ALT_FN_2_OUT)
+#define GPIO70_RTCCLK_MD	(70 | GPIO_ALT_FN_1_OUT)
+#define GPIO71_LDD_13_MD	(71 | GPIO_ALT_FN_2_OUT)
+#define GPIO71_3_6MHz_MD	(71 | GPIO_ALT_FN_1_OUT)
+#define GPIO72_LDD_14_MD	(72 | GPIO_ALT_FN_2_OUT)
+#define GPIO72_32kHz_MD		(72 | GPIO_ALT_FN_1_OUT)
+#define GPIO73_LDD_15_MD	(73 | GPIO_ALT_FN_2_OUT)
+#define GPIO73_MBGNT_MD		(73 | GPIO_ALT_FN_1_OUT)
+#define GPIO74_LCD_FCLK_MD	(74 | GPIO_ALT_FN_2_OUT)
+#define GPIO75_LCD_LCLK_MD	(75 | GPIO_ALT_FN_2_OUT)
+#define GPIO76_LCD_PCLK_MD	(76 | GPIO_ALT_FN_2_OUT)
+#define GPIO77_LCD_ACBIAS_MD	(77 | GPIO_ALT_FN_2_OUT)
+#define GPIO78_nCS_2_MD		(78 | GPIO_ALT_FN_2_OUT)
+#define GPIO78_nPCE_2_MD	(78 | GPIO_ALT_FN_1_OUT)
+#define GPIO79_nCS_3_MD		(79 | GPIO_ALT_FN_2_OUT)
+#define GPIO79_pSKTSEL_MD	(79 | GPIO_ALT_FN_1_OUT)
+#define GPIO80_nCS_4_MD		(80 | GPIO_ALT_FN_2_OUT)
+#define GPIO81_NSSP_CLK_OUT	(81 | GPIO_ALT_FN_1_OUT)
+#define GPIO81_NSSP_CLK_IN	(81 | GPIO_ALT_FN_1_IN)
+#define GPIO81_CIF_DD_0_MD	(81 | GPIO_ALT_FN_2_IN)
+#define GPIO82_NSSP_FRM_OUT	(82 | GPIO_ALT_FN_1_OUT)
+#define GPIO82_NSSP_FRM_IN	(82 | GPIO_ALT_FN_1_IN)
+#define GPIO82_CIF_DD_5_MD	(82 | GPIO_ALT_FN_3_IN)
+#define GPIO83_NSSP_TX		(83 | GPIO_ALT_FN_1_OUT)
+#define GPIO83_NSSP_RX		(83 | GPIO_ALT_FN_2_IN)
+#define GPIO83_CIF_DD_4_MD	(83 | GPIO_ALT_FN_3_IN)
+#define GPIO84_NSSP_TX		(84 | GPIO_ALT_FN_1_OUT)
+#define GPIO84_NSSP_RX		(84 | GPIO_ALT_FN_2_IN)
+#define GPIO84_CIF_FV_MD	(84 | GPIO_ALT_FN_3_IN)
+#define GPIO85_nPCE_1_MD	(85 | GPIO_ALT_FN_1_OUT)
+#define GPIO85_CIF_LV_MD	(85 | GPIO_ALT_FN_3_IN)
+#define GPIO86_nPCE_1_MD	(86 | GPIO_ALT_FN_1_OUT)
+#define GPIO88_USBH1_PWR_MD	(88 | GPIO_ALT_FN_1_IN)
+#define GPIO89_USBH1_PEN_MD	(89 | GPIO_ALT_FN_2_OUT)
+#define GPIO90_CIF_DD_4_MD	(90 | GPIO_ALT_FN_3_IN)
+#define GPIO91_CIF_DD_5_MD	(91 | GPIO_ALT_FN_3_IN)
+#define GPIO92_MMCDAT0_MD	(92 | GPIO_ALT_FN_1_OUT)
+#define GPIO93_CIF_DD_6_MD	(93 | GPIO_ALT_FN_2_IN)
+#define GPIO94_CIF_DD_5_MD	(94 | GPIO_ALT_FN_2_IN)
+#define GPIO95_CIF_DD_4_MD	(95 | GPIO_ALT_FN_2_IN)
+#define GPIO95_KP_MKIN6_MD	(95 | GPIO_ALT_FN_3_IN)
+#define GPIO96_KP_DKIN3_MD	(96 | GPIO_ALT_FN_1_IN)
+#define GPIO96_FFRXD_MD		(96 | GPIO_ALT_FN_3_IN)
+#define GPIO97_KP_MKIN3_MD	(97 | GPIO_ALT_FN_3_IN)
+#define GPIO98_CIF_DD_0_MD	(98 | GPIO_ALT_FN_2_IN)
+#define GPIO98_FFRTS_MD		(98 | GPIO_ALT_FN_3_OUT)
+#define GPIO99_FFTXD_MD		(99 | GPIO_ALT_FN_3_OUT)
+#define GPIO100_KP_MKIN0_MD	(100 | GPIO_ALT_FN_1_IN)
+#define GPIO101_KP_MKIN1_MD	(101 | GPIO_ALT_FN_1_IN)
+#define GPIO102_nPCE_1_MD	(102 | GPIO_ALT_FN_1_OUT)
+#define GPIO102_KP_MKIN2_MD	(102 | GPIO_ALT_FN_1_IN)
+#define GPIO103_CIF_DD_3_MD	(103 | GPIO_ALT_FN_1_IN)
+#define GPIO103_KP_MKOUT0_MD	(103 | GPIO_ALT_FN_2_OUT)
+#define GPIO104_CIF_DD_2_MD	(104 | GPIO_ALT_FN_1_IN)
+#define GPIO104_pSKTSEL_MD	(104 | GPIO_ALT_FN_1_OUT)
+#define GPIO104_KP_MKOUT1_MD	(104 | GPIO_ALT_FN_2_OUT)
+#define GPIO105_CIF_DD_1_MD	(105 | GPIO_ALT_FN_1_IN)
+#define GPIO105_KP_MKOUT2_MD	(105 | GPIO_ALT_FN_2_OUT)
+#define GPIO106_CIF_DD_9_MD	(106 | GPIO_ALT_FN_1_IN)
+#define GPIO106_KP_MKOUT3_MD	(106 | GPIO_ALT_FN_2_OUT)
+#define GPIO107_CIF_DD_8_MD	(107 | GPIO_ALT_FN_1_IN)
+#define GPIO107_KP_MKOUT4_MD	(107 | GPIO_ALT_FN_2_OUT)
+#define GPIO108_CIF_DD_7_MD	(108 | GPIO_ALT_FN_1_IN)
+#define GPIO108_KP_MKOUT5_MD	(108 | GPIO_ALT_FN_2_OUT)
+#define GPIO109_MMCDAT1_MD	(109 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCDAT2_MD	(110 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCCS0_MD	(110 | GPIO_ALT_FN_1_OUT)
+#define GPIO111_MMCDAT3_MD	(111 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCCS1_MD	(111 | GPIO_ALT_FN_1_OUT)
+#define GPIO112_MMCCMD_MD	(112 | GPIO_ALT_FN_1_OUT)
+#define GPIO113_I2S_SYSCLK_MD	(113 | GPIO_ALT_FN_1_OUT)
+#define GPIO113_AC97_RESET_N_MD	(113 | GPIO_ALT_FN_2_OUT)
+#define GPIO117_I2CSCL_MD	(117 | GPIO_ALT_FN_1_IN)
+#define GPIO118_I2CSDA_MD	(118 | GPIO_ALT_FN_1_IN)
+
+#endif /* __ASM_ARCH_PXA2XX_GPIO_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
new file mode 100644
index 000000000000..806ecfea44bf
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -0,0 +1,246 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+ *
+ *  Taken from pxa-regs.h by Russell King
+ *
+ *  Author:	Nicolas Pitre
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PXA2XX_REGS_H
+#define __PXA2XX_REGS_H
+
+/*
+ * Memory controller
+ */
+
+#define MDCNFG		__REG(0x48000000)  /* SDRAM Configuration Register 0 */
+#define MDREFR		__REG(0x48000004)  /* SDRAM Refresh Control Register */
+#define MSC0		__REG(0x48000008)  /* Static Memory Control Register 0 */
+#define MSC1		__REG(0x4800000C)  /* Static Memory Control Register 1 */
+#define MSC2		__REG(0x48000010)  /* Static Memory Control Register 2 */
+#define MECR		__REG(0x48000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR		__REG(0x48000018)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG		__REG(0x4800001C)  /* Synchronous Static Memory Control Register */
+#define SXMRS		__REG(0x48000024)  /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0		__REG(0x48000028)  /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1		__REG(0x4800002C)  /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0		__REG(0x48000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1		__REG(0x48000034)  /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0		__REG(0x48000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1		__REG(0x4800003C)  /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS		__REG(0x48000040)  /* MRS value to be written to SDRAM */
+#define BOOT_DEF	__REG(0x48000044)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s)	__REG2(0x48000028, (s)<<2 )  /* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s)	__REG2(0x48000030, (s)<<2 )  /* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s)		__REG2(0x48000038, (s)<<2 )  /* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS	(1 << 0)	/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT	(1 << 1)	/* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#define MDREFR_K0DB4	(1 << 29)	/* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
+#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
+#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
+
+
+#ifdef CONFIG_PXA27x
+
+#define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
+
+#define ARB_DMA_SLV_PARK	(1<<31)	   /* Be parked with DMA slave when idle */
+#define ARB_CI_PARK		(1<<30)	   /* Be parked with Camera Interface when idle */
+#define ARB_EX_MEM_PARK 	(1<<29)	   /* Be parked with external MEMC when idle */
+#define ARB_INT_MEM_PARK	(1<<28)	   /* Be parked with internal MEMC when idle */
+#define ARB_USB_PARK		(1<<27)	   /* Be parked with USB when idle */
+#define ARB_LCD_PARK		(1<<26)	   /* Be parked with LCD when idle */
+#define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
+#define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
+#define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
+
+#endif
+
+
+/*
+ * Power Manager
+ */
+
+#define PMCR		__REG(0x40F00000)  /* Power Manager Control Register */
+#define PSSR		__REG(0x40F00004)  /* Power Manager Sleep Status Register */
+#define PSPR		__REG(0x40F00008)  /* Power Manager Scratch Pad Register */
+#define PWER		__REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
+#define PRER		__REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER		__REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR		__REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR		__REG(0x40F0001C)  /* Power Manager General Configuration Register */
+#define PGSR0		__REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1		__REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2		__REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define PGSR3		__REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
+#define RCSR		__REG(0x40F00030)  /* Reset Controller Status Register */
+
+#define PSLR		__REG(0x40F00034)	/* Power Manager Sleep Config Register */
+#define PSTR		__REG(0x40F00038)	/* Power Manager Standby Config Register */
+#define PSNR		__REG(0x40F0003C)	/* Power Manager Sense Config Register */
+#define PVCR		__REG(0x40F00040)	/* Power Manager VoltageControl Register */
+#define PKWR		__REG(0x40F00050)	/* Power Manager KB Wake-up Enable Reg */
+#define PKSR		__REG(0x40F00054)	/* Power Manager KB Level-Detect Register */
+#define PCMD(x)	__REG2(0x40F00080, (x)<<2)
+#define PCMD0	__REG(0x40F00080 + 0 * 4)
+#define PCMD1	__REG(0x40F00080 + 1 * 4)
+#define PCMD2	__REG(0x40F00080 + 2 * 4)
+#define PCMD3	__REG(0x40F00080 + 3 * 4)
+#define PCMD4	__REG(0x40F00080 + 4 * 4)
+#define PCMD5	__REG(0x40F00080 + 5 * 4)
+#define PCMD6	__REG(0x40F00080 + 6 * 4)
+#define PCMD7	__REG(0x40F00080 + 7 * 4)
+#define PCMD8	__REG(0x40F00080 + 8 * 4)
+#define PCMD9	__REG(0x40F00080 + 9 * 4)
+#define PCMD10	__REG(0x40F00080 + 10 * 4)
+#define PCMD11	__REG(0x40F00080 + 11 * 4)
+#define PCMD12	__REG(0x40F00080 + 12 * 4)
+#define PCMD13	__REG(0x40F00080 + 13 * 4)
+#define PCMD14	__REG(0x40F00080 + 14 * 4)
+#define PCMD15	__REG(0x40F00080 + 15 * 4)
+#define PCMD16	__REG(0x40F00080 + 16 * 4)
+#define PCMD17	__REG(0x40F00080 + 17 * 4)
+#define PCMD18	__REG(0x40F00080 + 18 * 4)
+#define PCMD19	__REG(0x40F00080 + 19 * 4)
+#define PCMD20	__REG(0x40F00080 + 20 * 4)
+#define PCMD21	__REG(0x40F00080 + 21 * 4)
+#define PCMD22	__REG(0x40F00080 + 22 * 4)
+#define PCMD23	__REG(0x40F00080 + 23 * 4)
+#define PCMD24	__REG(0x40F00080 + 24 * 4)
+#define PCMD25	__REG(0x40F00080 + 25 * 4)
+#define PCMD26	__REG(0x40F00080 + 26 * 4)
+#define PCMD27	__REG(0x40F00080 + 27 * 4)
+#define PCMD28	__REG(0x40F00080 + 28 * 4)
+#define PCMD29	__REG(0x40F00080 + 29 * 4)
+#define PCMD30	__REG(0x40F00080 + 30 * 4)
+#define PCMD31	__REG(0x40F00080 + 31 * 4)
+
+#define PCMD_MBC	(1<<12)
+#define PCMD_DCE	(1<<11)
+#define PCMD_LC	(1<<10)
+/* FIXME:  PCMD_SQC need be checked.   */
+#define PCMD_SQC	(3<<8)	/* currently only bit 8 is changeable,
+				   bit 9 should be 0 all day. */
+#define PVCR_VCSA	(0x1<<14)
+#define PVCR_CommandDelay (0xf80)
+#define PCFR_PI2C_EN	(0x1 << 6)
+
+#define PSSR_OTGPH	(1 << 6)	/* OTG Peripheral control Hold */
+#define PSSR_RDH	(1 << 5)	/* Read Disable Hold */
+#define PSSR_PH		(1 << 4)	/* Peripheral Control Hold */
+#define PSSR_STS	(1 << 3)	/* Standby Mode Status */
+#define PSSR_VFS	(1 << 2)	/* VDD Fault Status */
+#define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
+#define PSSR_SSS	(1 << 0)	/* Software Sleep Status */
+
+#define PSLR_SL_ROD	(1 << 20)	/* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
+
+#define PCFR_RO		(1 << 15)	/* RDH Override */
+#define PCFR_PO		(1 << 14)	/* PH Override */
+#define PCFR_GPROD	(1 << 12)	/* GPIO nRESET_OUT Disable */
+#define PCFR_L1_EN	(1 << 11)	/* Sleep Mode L1 converter Enable */
+#define PCFR_FVC	(1 << 10)	/* Frequency/Voltage Change */
+#define PCFR_DC_EN	(1 << 7)	/* Sleep/deep-sleep DC-DC Converter Enable */
+#define PCFR_PI2CEN	(1 << 6)	/* Enable PI2C controller */
+#define PCFR_GPR_EN	(1 << 4)	/* nRESET_GPIO Pin Enable */
+#define PCFR_DS		(1 << 3)	/* Deep Sleep Mode */
+#define PCFR_FS		(1 << 2)	/* Float Static Chip Selects */
+#define PCFR_FP		(1 << 1)	/* Float PCMCIA controls */
+#define PCFR_OPDE	(1 << 0)	/* 3.6864 MHz oscillator power-down enable */
+
+#define RCSR_GPR	(1 << 3)	/* GPIO Reset */
+#define RCSR_SMR	(1 << 2)	/* Sleep Mode */
+#define RCSR_WDR	(1 << 1)	/* Watchdog Reset */
+#define RCSR_HWR	(1 << 0)	/* Hardware Reset */
+
+#define PWER_GPIO(Nb)	(1 << Nb)	/* GPIO [0..15] wake-up enable     */
+#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
+#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
+#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
+#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
+#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
+#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
+#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
+#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
+#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
+#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
+#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
+#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
+#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
+#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
+#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
+#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
+#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
+
+/*
+ * PXA2xx specific Core clock definitions
+ */
+#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
+#define CCSR		__REG(0x4130000C)  /* Core Clock Status Register */
+#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
+#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */
+
+#define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK	0x001f	/* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
+#define CKEN_CAMERA	(24)	/* Camera Interface Clock Enable */
+#define CKEN_SSP1	(23)	/* SSP1 Unit Clock Enable */
+#define CKEN_MEMC	(22)	/* Memory Controller Clock Enable */
+#define CKEN_MEMSTK	(21)	/* Memory Stick Host Controller */
+#define CKEN_IM		(20)	/* Internal Memory Clock Enable */
+#define CKEN_KEYPAD	(19)	/* Keypad Interface Clock Enable */
+#define CKEN_USIM	(18)	/* USIM Unit Clock Enable */
+#define CKEN_MSL	(17)	/* MSL Unit Clock Enable */
+#define CKEN_LCD	(16)	/* LCD Unit Clock Enable */
+#define CKEN_PWRI2C	(15)	/* PWR I2C Unit Clock Enable */
+#define CKEN_I2C	(14)	/* I2C Unit Clock Enable */
+#define CKEN_FICP	(13)	/* FICP Unit Clock Enable */
+#define CKEN_MMC	(12)	/* MMC Unit Clock Enable */
+#define CKEN_USB	(11)	/* USB Unit Clock Enable */
+#define CKEN_ASSP	(10)	/* ASSP (SSP3) Clock Enable */
+#define CKEN_USBHOST	(10)	/* USB Host Unit Clock Enable */
+#define CKEN_OSTIMER	(9)	/* OS Timer Unit Clock Enable */
+#define CKEN_NSSP	(9)	/* NSSP (SSP2) Clock Enable */
+#define CKEN_I2S	(8)	/* I2S Unit Clock Enable */
+#define CKEN_BTUART	(7)	/* BTUART Unit Clock Enable */
+#define CKEN_FFUART	(6)	/* FFUART Unit Clock Enable */
+#define CKEN_STUART	(5)	/* STUART Unit Clock Enable */
+#define CKEN_HWUART	(4)	/* HWUART Unit Clock Enable */
+#define CKEN_SSP3	(4)	/* SSP3 Unit Clock Enable */
+#define CKEN_SSP	(3)	/* SSP Unit Clock Enable */
+#define CKEN_SSP2	(3)	/* SSP2 Unit Clock Enable */
+#define CKEN_AC97	(2)	/* AC97 Unit Clock Enable */
+#define CKEN_PWM1	(1)	/* PWM1 Clock Enable */
+#define CKEN_PWM0	(0)	/* PWM0 Clock Enable */
+
+#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
new file mode 100644
index 000000000000..2206cb61a9f9
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef PXA2XX_SPI_H_
+#define PXA2XX_SPI_H_
+
+#define PXA2XX_CS_ASSERT (0x01)
+#define PXA2XX_CS_DEASSERT (0x02)
+
+/* device.platform_data for SSP controller devices */
+struct pxa2xx_spi_master {
+	u32 clock_enable;
+	u16 num_chipselect;
+	u8 enable_dma;
+};
+
+/* spi_board_info.controller_data for SPI slave devices,
+ * copied to spi_device.platform_data ... mostly for dma tuning
+ */
+struct pxa2xx_spi_chip {
+	u8 tx_threshold;
+	u8 rx_threshold;
+	u8 dma_burst_size;
+	u32 timeout;
+	u8 enable_loopback;
+	void (*cs_control)(u32 command);
+};
+
+extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
+
+#endif /*PXA2XX_SPI_H_*/
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
new file mode 100644
index 000000000000..39eb68319e28
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -0,0 +1,183 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+ *
+ * PXA3xx specific register definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_PXA3XX_REGS_H
+#define __ASM_ARCH_PXA3XX_REGS_H
+
+/*
+ * Oscillator Configuration Register (OSCC)
+ */
+#define OSCC           __REG(0x41350000)  /* Oscillator Configuration Register */
+
+#define OSCC_PEN       (1 << 11)       /* 13MHz POUT */
+
+
+/*
+ * Service Power Management Unit (MPMU)
+ */
+#define PMCR		__REG(0x40F50000)	/* Power Manager Control Register */
+#define PSR		__REG(0x40F50004)	/* Power Manager S2 Status Register */
+#define PSPR		__REG(0x40F50008)	/* Power Manager Scratch Pad Register */
+#define PCFR		__REG(0x40F5000C)	/* Power Manager General Configuration Register */
+#define PWER		__REG(0x40F50010)	/* Power Manager Wake-up Enable Register */
+#define PWSR		__REG(0x40F50014)	/* Power Manager Wake-up Status Register */
+#define PECR		__REG(0x40F50018)	/* Power Manager EXT_WAKEUP[1:0] Control Register */
+#define DCDCSR		__REG(0x40F50080)	/* DC-DC Controller Status Register */
+#define PVCR		__REG(0x40F50100)	/* Power Manager Voltage Change Control Register */
+#define PCMD(x)		__REG(0x40F50110 + ((x) << 2))
+
+/*
+ * Slave Power Managment Unit
+ */
+#define ASCR		__REG(0x40f40000)	/* Application Subsystem Power Status/Configuration */
+#define ARSR		__REG(0x40f40004)	/* Application Subsystem Reset Status */
+#define AD3ER		__REG(0x40f40008)	/* Application Subsystem Wake-Up from D3 Enable */
+#define AD3SR		__REG(0x40f4000c)	/* Application Subsystem Wake-Up from D3 Status */
+#define AD2D0ER		__REG(0x40f40010)	/* Application Subsystem Wake-Up from D2 to D0 Enable */
+#define AD2D0SR		__REG(0x40f40014)	/* Application Subsystem Wake-Up from D2 to D0 Status */
+#define AD2D1ER		__REG(0x40f40018)	/* Application Subsystem Wake-Up from D2 to D1 Enable */
+#define AD2D1SR		__REG(0x40f4001c)	/* Application Subsystem Wake-Up from D2 to D1 Status */
+#define AD1D0ER		__REG(0x40f40020)	/* Application Subsystem Wake-Up from D1 to D0 Enable */
+#define AD1D0SR		__REG(0x40f40024)	/* Application Subsystem Wake-Up from D1 to D0 Status */
+#define AGENP		__REG(0x40f4002c)	/* Application Subsystem General Purpose */
+#define AD3R		__REG(0x40f40030)	/* Application Subsystem D3 Configuration */
+#define AD2R		__REG(0x40f40034)	/* Application Subsystem D2 Configuration */
+#define AD1R		__REG(0x40f40038)	/* Application Subsystem D1 Configuration */
+
+/*
+ * Application Subsystem Configuration bits.
+ */
+#define ASCR_RDH		(1 << 31)
+#define ASCR_D1S		(1 << 2)
+#define ASCR_D2S		(1 << 1)
+#define ASCR_D3S		(1 << 0)
+
+/*
+ * Application Reset Status bits.
+ */
+#define ARSR_GPR		(1 << 3)
+#define ARSR_LPMR		(1 << 2)
+#define ARSR_WDT		(1 << 1)
+#define ARSR_HWR		(1 << 0)
+
+/*
+ * Application Subsystem Wake-Up bits.
+ */
+#define ADXER_WRTC		(1 << 31)	/* RTC */
+#define ADXER_WOST		(1 << 30)	/* OS Timer */
+#define ADXER_WTSI		(1 << 29)	/* Touchscreen */
+#define ADXER_WUSBH		(1 << 28)	/* USB host */
+#define ADXER_WUSB2		(1 << 26)	/* USB client 2.0 */
+#define ADXER_WMSL0		(1 << 24)	/* MSL port 0*/
+#define ADXER_WDMUX3		(1 << 23)	/* USB EDMUX3 */
+#define ADXER_WDMUX2		(1 << 22)	/* USB EDMUX2 */
+#define ADXER_WKP		(1 << 21)	/* Keypad */
+#define ADXER_WUSIM1		(1 << 20)	/* USIM Port 1 */
+#define ADXER_WUSIM0		(1 << 19)	/* USIM Port 0 */
+#define ADXER_WOTG		(1 << 16)	/* USBOTG input */
+#define ADXER_MFP_WFLASH	(1 << 15)	/* MFP: Data flash busy */
+#define ADXER_MFP_GEN12		(1 << 14)	/* MFP: MMC3/GPIO/OST inputs */
+#define ADXER_MFP_WMMC2		(1 << 13)	/* MFP: MMC2 */
+#define ADXER_MFP_WMMC1		(1 << 12)	/* MFP: MMC1 */
+#define ADXER_MFP_WI2C		(1 << 11)	/* MFP: I2C */
+#define ADXER_MFP_WSSP4		(1 << 10)	/* MFP: SSP4 */
+#define ADXER_MFP_WSSP3		(1 << 9)	/* MFP: SSP3 */
+#define ADXER_MFP_WMAXTRIX	(1 << 8)	/* MFP: matrix keypad */
+#define ADXER_MFP_WUART3	(1 << 7)	/* MFP: UART3 */
+#define ADXER_MFP_WUART2	(1 << 6)	/* MFP: UART2 */
+#define ADXER_MFP_WUART1	(1 << 5)	/* MFP: UART1 */
+#define ADXER_MFP_WSSP2		(1 << 4)	/* MFP: SSP2 */
+#define ADXER_MFP_WSSP1		(1 << 3)	/* MFP: SSP1 */
+#define ADXER_MFP_WAC97		(1 << 2)	/* MFP: AC97 */
+#define ADXER_WEXTWAKE1		(1 << 1)	/* External Wake 1 */
+#define ADXER_WEXTWAKE0		(1 << 0)	/* External Wake 0 */
+
+/*
+ * AD3R/AD2R/AD1R bits.  R2-R5 are only defined for PXA320.
+ */
+#define ADXR_L2			(1 << 8)
+#define ADXR_R5			(1 << 5)
+#define ADXR_R4			(1 << 4)
+#define ADXR_R3			(1 << 3)
+#define ADXR_R2			(1 << 2)
+#define ADXR_R1			(1 << 1)
+#define ADXR_R0			(1 << 0)
+
+/*
+ * Values for PWRMODE CP15 register
+ */
+#define PXA3xx_PM_S3D4C4	0x07	/* aka deep sleep */
+#define PXA3xx_PM_S2D3C4	0x06	/* aka sleep */
+#define PXA3xx_PM_S0D2C2	0x03	/* aka standby */
+#define PXA3xx_PM_S0D1C2	0x02	/* aka LCD refresh */
+#define PXA3xx_PM_S0D0C1	0x01
+
+/*
+ * Application Subsystem Clock
+ */
+#define ACCR		__REG(0x41340000)	/* Application Subsystem Clock Configuration Register */
+#define ACSR		__REG(0x41340004)	/* Application Subsystem Clock Status Register */
+#define AICSR		__REG(0x41340008)	/* Application Subsystem Interrupt Control/Status Register */
+#define CKENA		__REG(0x4134000C)	/* A Clock Enable Register */
+#define CKENB		__REG(0x41340010)	/* B Clock Enable Register */
+#define AC97_DIV	__REG(0x41340014)	/* AC97 clock divisor value register */
+
+/*
+ * Clock Enable Bit
+ */
+#define CKEN_LCD	1	/* < LCD Clock Enable */
+#define CKEN_USBH	2	/* < USB host clock enable */
+#define CKEN_CAMERA	3	/* < Camera interface clock enable */
+#define CKEN_NAND	4	/* < NAND Flash Controller Clock Enable */
+#define CKEN_USB2	6	/* < USB 2.0 client clock enable. */
+#define CKEN_DMC	8	/* < Dynamic Memory Controller clock enable */
+#define CKEN_SMC	9	/* < Static Memory Controller clock enable */
+#define CKEN_ISC	10	/* < Internal SRAM Controller clock enable */
+#define CKEN_BOOT	11	/* < Boot rom clock enable */
+#define CKEN_MMC1	12	/* < MMC1 Clock enable */
+#define CKEN_MMC2	13	/* < MMC2 clock enable */
+#define CKEN_KEYPAD	14	/* < Keypand Controller Clock Enable */
+#define CKEN_CIR	15	/* < Consumer IR Clock Enable */
+#define CKEN_USIM0	17	/* < USIM[0] Clock Enable */
+#define CKEN_USIM1	18	/* < USIM[1] Clock Enable */
+#define CKEN_TPM	19	/* < TPM clock enable */
+#define CKEN_UDC	20	/* < UDC clock enable */
+#define CKEN_BTUART	21	/* < BTUART clock enable */
+#define CKEN_FFUART	22	/* < FFUART clock enable */
+#define CKEN_STUART	23	/* < STUART clock enable */
+#define CKEN_AC97	24	/* < AC97 clock enable */
+#define CKEN_TOUCH	25	/* < Touch screen Interface Clock Enable */
+#define CKEN_SSP1	26	/* < SSP1 clock enable */
+#define CKEN_SSP2	27	/* < SSP2 clock enable */
+#define CKEN_SSP3	28	/* < SSP3 clock enable */
+#define CKEN_SSP4	29	/* < SSP4 clock enable */
+#define CKEN_MSL0	30	/* < MSL0 clock enable */
+#define CKEN_PWM0	32	/* < PWM[0] clock enable */
+#define CKEN_PWM1	33	/* < PWM[1] clock enable */
+#define CKEN_I2C	36	/* < I2C clock enable */
+#define CKEN_INTC	38	/* < Interrupt controller clock enable */
+#define CKEN_GPIO	39	/* < GPIO clock enable */
+#define CKEN_1WIRE	40	/* < 1-wire clock enable */
+#define CKEN_HSIO2	41	/* < HSIO2 clock enable */
+#define CKEN_MINI_IM	48	/* < Mini-IM */
+#define CKEN_MINI_LCD	49	/* < Mini LCD */
+
+#if defined(CONFIG_CPU_PXA310)
+#define CKEN_MMC3	5	/* < MMC3 Clock Enable */
+#define CKEN_MVED	43	/* < MVED clock enable */
+#endif
+
+/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
+#define PXA300_CKEN_GRAPHICS	42	/* Graphics controller clock enable */
+#define PXA320_CKEN_GRAPHICS	7	/* Graphics controller clock enable */
+
+#endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
new file mode 100644
index 000000000000..eb4b190b6657
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_ARCH_PXA3XX_NAND_H
+#define __ASM_ARCH_PXA3XX_NAND_H
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+struct pxa3xx_nand_platform_data {
+
+	/* the data flash bus is shared between the Static Memory
+	 * Controller and the Data Flash Controller,  the arbiter
+	 * controls the ownership of the bus
+	 */
+	int	enable_arbiter;
+
+	struct mtd_partition *parts;
+	unsigned int	nr_parts;
+};
+
+extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
+#endif /* __ASM_ARCH_PXA3XX_NAND_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
new file mode 100644
index 000000000000..65447549616f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -0,0 +1,151 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/pxafb.h
+ *
+ *  Support for the xscale frame buffer.
+ *
+ *  Author:     Jean-Frederic Clere
+ *  Created:    Sep 22, 2003
+ *  Copyright:  jfclere@sinix.net
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/fb.h>
+#include <mach/regs-lcd.h>
+
+/*
+ * Supported LCD connections
+ *
+ * bits 0 - 3: for LCD panel type:
+ *
+ *   STN  - for passive matrix
+ *   DSTN - for dual scan passive matrix
+ *   TFT  - for active matrix
+ *
+ * bits 4 - 9 : for bus width
+ * bits 10-17 : for AC Bias Pin Frequency
+ * bit     18 : for output enable polarity
+ * bit     19 : for pixel clock edge
+ */
+#define LCD_CONN_TYPE(_x)	((_x) & 0x0f)
+#define LCD_CONN_WIDTH(_x)	(((_x) >> 4) & 0x1f)
+
+#define LCD_TYPE_UNKNOWN	0
+#define LCD_TYPE_MONO_STN	1
+#define LCD_TYPE_MONO_DSTN	2
+#define LCD_TYPE_COLOR_STN	3
+#define LCD_TYPE_COLOR_DSTN	4
+#define LCD_TYPE_COLOR_TFT	5
+#define LCD_TYPE_SMART_PANEL	6
+#define LCD_TYPE_MAX		7
+
+#define LCD_MONO_STN_4BPP	((4  << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_STN_8BPP	((8  << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_DSTN_8BPP	((8  << 4) | LCD_TYPE_MONO_DSTN)
+#define LCD_COLOR_STN_8BPP	((8  << 4) | LCD_TYPE_COLOR_STN)
+#define LCD_COLOR_DSTN_16BPP	((16 << 4) | LCD_TYPE_COLOR_DSTN)
+#define LCD_COLOR_TFT_16BPP	((16 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_COLOR_TFT_18BPP	((18 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_SMART_PANEL_8BPP	((8  << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_16BPP	((16 << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_18BPP	((18 << 4) | LCD_TYPE_SMART_PANEL)
+
+#define LCD_AC_BIAS_FREQ(x)	(((x) & 0xff) << 10)
+#define LCD_BIAS_ACTIVE_HIGH	(0 << 17)
+#define LCD_BIAS_ACTIVE_LOW	(1 << 17)
+#define LCD_PCLK_EDGE_RISE	(0 << 18)
+#define LCD_PCLK_EDGE_FALL	(1 << 18)
+
+/*
+ * This structure describes the machine which we are running on.
+ * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
+ * of linux/drivers/video/pxafb.c
+ */
+struct pxafb_mode_info {
+	u_long		pixclock;
+
+	u_short		xres;
+	u_short		yres;
+
+	u_char		bpp;
+	u_int		cmap_greyscale:1,
+			depth:8,
+			unused:23;
+
+	/* Parallel Mode Timing */
+	u_char		hsync_len;
+	u_char		left_margin;
+	u_char		right_margin;
+
+	u_char		vsync_len;
+	u_char		upper_margin;
+	u_char		lower_margin;
+	u_char		sync;
+
+	/* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
+	 * Note:
+	 * 1. all parameters in nanosecond (ns)
+	 * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
+	 *    in pxa27x and pxa3xx, initialize them to the same value or
+	 *    the larger one will be used
+	 * 3. same to {rd,wr}_pulse_width
+	 */
+	unsigned	a0csrd_set_hld;	/* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
+	unsigned	a0cswr_set_hld;	/* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
+	unsigned	wr_pulse_width;	/* L_PCLK_WR pulse width */
+	unsigned	rd_pulse_width;	/* L_FCLK_RD pulse width */
+	unsigned	cmd_inh_time;	/* Command Inhibit time between two writes */
+	unsigned	op_hold_time;	/* Output Hold time from L_FCLK_RD negation */
+};
+
+struct pxafb_mach_info {
+	struct pxafb_mode_info *modes;
+	unsigned int num_modes;
+
+	unsigned int	lcd_conn;
+
+	u_int		fixed_modes:1,
+			cmap_inverse:1,
+			cmap_static:1,
+			unused:29;
+
+	/* The following should be defined in LCCR0
+	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
+	 *      LCCR0_Sngl or LCCR0_Dual        Single/Dual panel
+	 *      LCCR0_Mono or LCCR0_Color       Mono/Color
+	 *      LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
+	 *      LCCR0_DMADel(Tcpu) (optional)   DMA request delay
+	 *
+	 * The following should not be defined in LCCR0:
+	 *      LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
+	 *      LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
+	 */
+	u_int		lccr0;
+	/* The following should be defined in LCCR3
+	 *      LCCR3_OutEnH or LCCR3_OutEnL    Output enable polarity
+	 *      LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
+	 *      LCCR3_Acb(X)                    AB Bias pin frequency
+	 *      LCCR3_DPC (optional)            Double Pixel Clock mode (untested)
+	 *
+	 * The following should not be defined in LCCR3
+	 *      LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
+	 */
+	u_int		lccr3;
+	/* The following should be defined in LCCR4
+	 *	LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
+	 *
+	 * All other bits in LCCR4 should be left alone.
+	 */
+	u_int		lccr4;
+	void (*pxafb_backlight_power)(int);
+	void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
+	void (*smart_update)(struct fb_info *);
+};
+void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
+void set_pxa_fb_parent(struct device *parent_dev);
+unsigned long pxafb_get_hsync_time(struct device *dev);
+
+extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
+extern int pxafb_smart_flush(struct fb_info *info);
diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h
new file mode 100644
index 000000000000..c689c4ea769c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-lcd.h
@@ -0,0 +1,180 @@
+#ifndef __ASM_ARCH_REGS_LCD_H
+#define __ASM_ARCH_REGS_LCD_H
+
+#include <mach/bitfield.h>
+
+/*
+ * LCD Controller Registers and Bits Definitions
+ */
+#define LCCR0		(0x000)	/* LCD Controller Control Register 0 */
+#define LCCR1		(0x004)	/* LCD Controller Control Register 1 */
+#define LCCR2		(0x008)	/* LCD Controller Control Register 2 */
+#define LCCR3		(0x00C)	/* LCD Controller Control Register 3 */
+#define LCCR4		(0x010)	/* LCD Controller Control Register 4 */
+#define LCCR5		(0x014)	/* LCD Controller Control Register 5 */
+#define DFBR0		(0x020)	/* DMA Channel 0 Frame Branch Register */
+#define DFBR1		(0x024)	/* DMA Channel 1 Frame Branch Register */
+#define LCSR		(0x038)	/* LCD Controller Status Register */
+#define LIIDR		(0x03C)	/* LCD Controller Interrupt ID Register */
+#define TMEDRGBR	(0x040)	/* TMED RGB Seed Register */
+#define TMEDCR		(0x044)	/* TMED Control Register */
+
+#define CMDCR		(0x100)	/* Command Control Register */
+#define PRSR		(0x104)	/* Panel Read Status Register */
+
+#define LCCR3_1BPP	(0 << 24)
+#define LCCR3_2BPP	(1 << 24)
+#define LCCR3_4BPP	(2 << 24)
+#define LCCR3_8BPP	(3 << 24)
+#define LCCR3_16BPP	(4 << 24)
+#define LCCR3_18BPP	(5 << 24)
+#define LCCR3_18BPP_P	(6 << 24)
+#define LCCR3_19BPP	(7 << 24)
+#define LCCR3_19BPP_P	(1 << 29)
+#define LCCR3_24BPP	((1 << 29) | (1 << 24))
+#define LCCR3_25BPP	((1 << 29) | (2 << 24))
+
+#define LCCR3_PDFOR_0	(0 << 30)
+#define LCCR3_PDFOR_1	(1 << 30)
+#define LCCR3_PDFOR_2	(2 << 30)
+#define LCCR3_PDFOR_3	(3 << 30)
+
+#define LCCR4_PAL_FOR_0	(0 << 15)
+#define LCCR4_PAL_FOR_1	(1 << 15)
+#define LCCR4_PAL_FOR_2	(2 << 15)
+#define LCCR4_PAL_FOR_MASK	(3 << 15)
+
+#define FDADR0		(0x200)	/* DMA Channel 0 Frame Descriptor Address Register */
+#define FSADR0		(0x204)	/* DMA Channel 0 Frame Source Address Register */
+#define FIDR0		(0x208)	/* DMA Channel 0 Frame ID Register */
+#define LDCMD0		(0x20C)	/* DMA Channel 0 Command Register */
+#define FDADR1		(0x210)	/* DMA Channel 1 Frame Descriptor Address Register */
+#define FSADR1		(0x214)	/* DMA Channel 1 Frame Source Address Register */
+#define FIDR1		(0x218)	/* DMA Channel 1 Frame ID Register */
+#define LDCMD1		(0x21C)	/* DMA Channel 1 Command Register */
+#define FDADR6		(0x260) /* DMA Channel 6 Frame Descriptor Address Register */
+#define FSADR6		(0x264) /* DMA Channel 6 Frame Source Address Register */
+#define FIDR6		(0x268) /* DMA Channel 6 Frame ID Register */
+
+#define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
+#define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
+#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display */
+#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display */
+#define LCCR0_SDS	(1 << 2)	/* Single/Dual Panel Display Select */
+#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display */
+#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display */
+
+#define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
+#define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
+#define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
+#define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
+#define LCCR0_PAS	(1 << 7)	/* Passive/Active display Select */
+#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN) */
+#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT) */
+#define LCCR0_DPD	(1 << 9)	/* Double Pixel Data (monochrome) */
+#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome display */
+#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome display */
+#define LCCR0_DIS	(1 << 10)	/* LCD Disable */
+#define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
+#define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
+#define LCCR0_PDD_S	12
+#define LCCR0_BM	(1 << 20)	/* Branch mask */
+#define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
+#define LCCR0_LCDT	(1 << 22)	/* LCD panel type */
+#define LCCR0_RDSTM	(1 << 23)	/* Read status interrupt mask */
+#define LCCR0_CMDIM	(1 << 24)	/* Command interrupt mask */
+#define LCCR0_OUC	(1 << 25)	/* Overlay Underlay control bit */
+#define LCCR0_LDDALT	(1 << 26)	/* LDD alternate mapping control */
+
+#define LCCR1_PPL	Fld (10, 0)	/* Pixels Per Line - 1 */
+#define LCCR1_DisWdth(Pixel)	(((Pixel) - 1) << FShft (LCCR1_PPL))
+
+#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization */
+#define LCCR1_HorSnchWdth(Tpix)	(((Tpix) - 1) << FShft (LCCR1_HSW))
+
+#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait - 1 */
+#define LCCR1_EndLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_ELW))
+
+#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock */
+#define LCCR1_BegLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_BLW))
+
+#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1 */
+#define LCCR2_DisHght(Line)	(((Line) - 1) << FShft (LCCR2_LPP))
+
+#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse - 1 */
+#define LCCR2_VrtSnchWdth(Tln)	(((Tln) - 1) << FShft (LCCR2_VSW))
+
+#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait */
+#define LCCR2_EndFrmDel(Tln)	((Tln) << FShft (LCCR2_EFW))
+
+#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock */
+#define LCCR2_BegFrmDel(Tln)	((Tln) << FShft (LCCR2_BFW))
+
+#define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
+#define LCCR3_API_S	16
+#define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
+#define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
+#define LCCR3_PCP	(1 << 22)	/* Pixel Clock Polarity (L_PCLK) */
+#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge */
+#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge */
+
+#define LCCR3_OEP	(1 << 23)	/* Output Enable Polarity */
+#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High */
+#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low */
+
+#define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
+#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor */
+#define LCCR3_PixClkDiv(Div)	(((Div) << FShft (LCCR3_PCD)))
+
+#define LCCR3_BPP	Fld (3, 24)	/* Bit Per Pixel */
+#define LCCR3_Bpp(Bpp)	(((Bpp) << FShft (LCCR3_BPP)))
+
+#define LCCR3_ACB	Fld (8, 8)	/* AC Bias */
+#define LCCR3_Acb(Acb)	(((Acb) << FShft (LCCR3_ACB)))
+
+#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  HSP Active High */
+#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  HSP Active Low */
+
+#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  VSP Active High */
+#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  VSP Active Low */
+
+#define LCCR5_IUM(x)	(1 << ((x) + 23)) /* input underrun mask */
+#define LCCR5_BSM(x)	(1 << ((x) + 15)) /* branch mask */
+#define LCCR5_EOFM(x)	(1 << ((x) + 7))  /* end of frame mask */
+#define LCCR5_SOFM(x)	(1 << ((x) + 0))  /* start of frame mask */
+
+#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
+#define LCSR_SOF	(1 << 1)	/* Start of frame */
+#define LCSR_BER	(1 << 2)	/* Bus error */
+#define LCSR_ABC	(1 << 3)	/* AC Bias count */
+#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
+#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
+#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
+#define LCSR_QD		(1 << 7)	/* quick disable */
+#define LCSR_EOF	(1 << 8)	/* end of frame */
+#define LCSR_BS		(1 << 9)	/* branch status */
+#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
+#define LCSR_RD_ST	(1 << 11)	/* read status */
+#define LCSR_CMD_INT	(1 << 12)	/* command interrupt */
+
+#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
+
+/* smartpanel related */
+#define PRSR_DATA(x)	((x) & 0xff)	/* Panel Data */
+#define PRSR_A0		(1 << 8)	/* Read Data Source */
+#define PRSR_ST_OK	(1 << 9)	/* Status OK */
+#define PRSR_CON_NT	(1 << 10)	/* Continue to Next Command */
+
+#define SMART_CMD_A0			 (0x1 << 8)
+#define SMART_CMD_READ_STATUS_REG	 (0x0 << 9)
+#define SMART_CMD_READ_FRAME_BUFFER	((0x0 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_COMMAND		 (0x1 << 9)
+#define SMART_CMD_WRITE_DATA		((0x1 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_FRAME		((0x2 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WAIT_FOR_VSYNC	 (0x3 << 9)
+#define SMART_CMD_NOOP			 (0x4 << 9)
+#define SMART_CMD_INTERRUPT		 (0x5 << 9)
+
+#define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
+#define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
+#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h
new file mode 100644
index 000000000000..3c04cde2cf1f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h
@@ -0,0 +1,127 @@
+#ifndef __ASM_ARCH_REGS_SSP_H
+#define __ASM_ARCH_REGS_SSP_H
+
+/*
+ * SSP Serial Port Registers
+ * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
+ * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
+ */
+
+#define SSCR0		(0x00)  /* SSP Control Register 0 */
+#define SSCR1		(0x04)  /* SSP Control Register 1 */
+#define SSSR		(0x08)  /* SSP Status Register */
+#define SSITR		(0x0C)  /* SSP Interrupt Test Register */
+#define SSDR		(0x10)  /* SSP Data Write/Data Read Register */
+
+#define SSTO		(0x28)  /* SSP Time Out Register */
+#define SSPSP		(0x2C)  /* SSP Programmable Serial Protocol */
+#define SSTSA		(0x30)  /* SSP Tx Timeslot Active */
+#define SSRSA		(0x34)  /* SSP Rx Timeslot Active */
+#define SSTSS		(0x38)  /* SSP Timeslot Status */
+#define SSACD		(0x3C)  /* SSP Audio Clock Divider */
+
+#if defined(CONFIG_PXA3xx)
+#define SSACDD		(0x40)	/* SSP Audio Clock Dither Divider */
+#endif
+
+/* Common PXA2xx bits first */
+#define SSCR0_DSS	(0x0000000f)	/* Data Size Select (mask) */
+#define SSCR0_DataSize(x)  ((x) - 1)	/* Data Size Select [4..16] */
+#define SSCR0_FRF	(0x00000030)	/* FRame Format (mask) */
+#define SSCR0_Motorola	(0x0 << 4)	/* Motorola's Serial Peripheral Interface (SPI) */
+#define SSCR0_TI	(0x1 << 4)	/* Texas Instruments' Synchronous Serial Protocol (SSP) */
+#define SSCR0_National	(0x2 << 4)	/* National Microwire */
+#define SSCR0_ECS	(1 << 6)	/* External clock select */
+#define SSCR0_SSE	(1 << 7)	/* Synchronous Serial Port Enable */
+
+#if defined(CONFIG_PXA25x)
+#define SSCR0_SCR	(0x0000ff00)	/* Serial Clock Rate (mask) */
+#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
+
+#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define SSCR0_SCR	(0x000fff00)	/* Serial Clock Rate (mask) */
+#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
+#define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
+#define SSCR0_NCS	(1 << 21)	/* Network clock select */
+#define SSCR0_RIM	(1 << 22)	/* Receive FIFO overrrun interrupt mask */
+#define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
+#define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
+#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */
+#define SSCR0_ADC	(1 << 30)	/* Audio clock select */
+#define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
+#endif
+
+#if defined(CONFIG_PXA3xx)
+#define SSCR0_FPCKE	(1 << 29)	/* FIFO packing enable */
+#endif
+
+#define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
+#define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
+#define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
+#define SSCR1_SPO	(1 << 3)	/* Motorola SPI SSPSCLK polarity setting */
+#define SSCR1_SPH	(1 << 4)	/* Motorola SPI SSPSCLK phase setting */
+#define SSCR1_MWDS	(1 << 5)	/* Microwire Transmit Data Size */
+#define SSCR1_TFT	(0x000003c0)	/* Transmit FIFO Threshold (mask) */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
+#define SSCR1_RFT	(0x00003c00)	/* Receive FIFO Threshold (mask) */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
+
+#define SSSR_TNF	(1 << 2)	/* Transmit FIFO Not Full */
+#define SSSR_RNE	(1 << 3)	/* Receive FIFO Not Empty */
+#define SSSR_BSY	(1 << 4)	/* SSP Busy */
+#define SSSR_TFS	(1 << 5)	/* Transmit FIFO Service Request */
+#define SSSR_RFS	(1 << 6)	/* Receive FIFO Service Request */
+#define SSSR_ROR	(1 << 7)	/* Receive FIFO Overrun */
+
+#define SSCR0_TIM		(1 << 23)	/* Transmit FIFO Under Run Interrupt Mask */
+#define SSCR0_RIM		(1 << 22)	/* Receive FIFO Over Run interrupt Mask */
+#define SSCR0_NCS		(1 << 21)	/* Network Clock Select */
+#define SSCR0_EDSS		(1 << 20)	/* Extended Data Size Select */
+
+/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
+#define SSCR0_TISSP		(1 << 4)	/* TI Sync Serial Protocol */
+#define SSCR0_PSP		(3 << 4)	/* PSP - Programmable Serial Protocol */
+#define SSCR1_TTELP		(1 << 31)	/* TXD Tristate Enable Last Phase */
+#define SSCR1_TTE		(1 << 30)	/* TXD Tristate Enable */
+#define SSCR1_EBCEI		(1 << 29)	/* Enable Bit Count Error interrupt */
+#define SSCR1_SCFR		(1 << 28)	/* Slave Clock free Running */
+#define SSCR1_ECRA		(1 << 27)	/* Enable Clock Request A */
+#define SSCR1_ECRB		(1 << 26)	/* Enable Clock request B */
+#define SSCR1_SCLKDIR		(1 << 25)	/* Serial Bit Rate Clock Direction */
+#define SSCR1_SFRMDIR		(1 << 24)	/* Frame Direction */
+#define SSCR1_RWOT		(1 << 23)	/* Receive Without Transmit */
+#define SSCR1_TRAIL		(1 << 22)	/* Trailing Byte */
+#define SSCR1_TSRE		(1 << 21)	/* Transmit Service Request Enable */
+#define SSCR1_RSRE		(1 << 20)	/* Receive Service Request Enable */
+#define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out Interrupt enable */
+#define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interupt Enable */
+#define SSCR1_IFS		(1 << 16)	/* Invert Frame Signal */
+#define SSCR1_STRF		(1 << 15)	/* Select FIFO or EFWR */
+#define SSCR1_EFWR		(1 << 14)	/* Enable FIFO Write/Read */
+
+#define SSSR_BCE		(1 << 23)	/* Bit Count Error */
+#define SSSR_CSS		(1 << 22)	/* Clock Synchronisation Status */
+#define SSSR_TUR		(1 << 21)	/* Transmit FIFO Under Run */
+#define SSSR_EOC		(1 << 20)	/* End Of Chain */
+#define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
+#define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
+
+#define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
+#define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
+#define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */
+#define SSPSP_SFRMDLY(x)	((x) << 9)	/* Serial Frame Delay */
+#define SSPSP_DMYSTRT(x)	((x) << 7)	/* Dummy Start */
+#define SSPSP_STRTDLY(x)	((x) << 4)	/* Start Delay */
+#define SSPSP_ETDS		(1 << 3)	/* End of Transfer data State */
+#define SSPSP_SFRMP		(1 << 2)	/* Serial Frame Polarity */
+#define SSPSP_SCMODE(x)		((x) << 0)	/* Serial Bit Rate Clock Mode */
+
+#define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
+#define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
+#define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
+#if defined(CONFIG_PXA3xx)
+#define SSACD_SCDX8		(1 << 7)	/* SYSCLK division ratio select */
+#endif
+
+
+#endif /* __ASM_ARCH_REGS_SSP_H */
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
new file mode 100644
index 000000000000..9489a48871a8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H
+
+#define RESET_STATUS_HARDWARE	(1 << 0)	/* Hardware Reset */
+#define RESET_STATUS_WATCHDOG	(1 << 1)	/* Watchdog Reset */
+#define RESET_STATUS_LOWPOWER	(1 << 2)	/* Low Power/Sleep Exit */
+#define RESET_STATUS_GPIO	(1 << 3)	/* GPIO Reset */
+#define RESET_STATUS_ALL	(0xf)
+
+extern unsigned int reset_status;
+extern void clear_reset_status(unsigned int mask);
+
+/*
+ * register GPIO as reset generator
+ */
+extern int init_gpio_reset(int gpio);
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-pxa/include/mach/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h
new file mode 100644
index 000000000000..3b1d4a72d4d1
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/sharpsl.h
@@ -0,0 +1,34 @@
+/*
+ * SharpSL SSP Driver
+ */
+
+unsigned long corgi_ssp_ads7846_putget(unsigned long);
+unsigned long corgi_ssp_ads7846_get(void);
+void corgi_ssp_ads7846_put(unsigned long data);
+void corgi_ssp_ads7846_lock(void);
+void corgi_ssp_ads7846_unlock(void);
+void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data);
+void corgi_ssp_blduty_set(int duty);
+int corgi_ssp_max1111_get(unsigned long data);
+
+/*
+ * SharpSL Touchscreen Driver
+ */
+
+struct corgits_machinfo {
+	unsigned long (*get_hsync_invperiod)(void);
+	void (*put_hsync)(void);
+	void (*wait_hsync)(void);
+};
+
+
+/*
+ * SharpSL Backlight
+ */
+extern void corgibl_limit_intensity(int limit);
+
+
+/*
+ * SharpSL Battery/PM Driver
+ */
+extern void sharpsl_battery_kick(void);
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
new file mode 100644
index 000000000000..bd14365f7ed5
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -0,0 +1,158 @@
+/*
+ * Hardware specific definitions for SL-Cx000 series of PDAs
+ *
+ * Copyright (c) 2005 Alexander Wykes
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_SPITZ_H
+#define __ASM_ARCH_SPITZ_H  1
+#endif
+
+#include <linux/fb.h>
+
+/* Spitz/Akita GPIOs */
+
+#define SPITZ_GPIO_KEY_INT         (0) /* Key Interrupt */
+#define SPITZ_GPIO_RESET           (1)
+#define SPITZ_GPIO_nSD_DETECT      (9)
+#define SPITZ_GPIO_TP_INT          (11) /* Touch Panel interrupt */
+#define SPITZ_GPIO_AK_INT          (13) /* Remote Control */
+#define SPITZ_GPIO_ADS7846_CS      (14)
+#define SPITZ_GPIO_SYNC            (16)
+#define SPITZ_GPIO_MAX1111_CS      (20)
+#define SPITZ_GPIO_FATAL_BAT       (21)
+#define SPITZ_GPIO_HSYNC           (22)
+#define SPITZ_GPIO_nSD_CLK         (32)
+#define SPITZ_GPIO_USB_DEVICE      (35)
+#define SPITZ_GPIO_USB_HOST        (37)
+#define SPITZ_GPIO_USB_CONNECT     (41)
+#define SPITZ_GPIO_LCDCON_CS       (53)
+#define SPITZ_GPIO_nPCE            (54)
+#define SPITZ_GPIO_nSD_WP          (81)
+#define SPITZ_GPIO_ON_RESET        (89)
+#define SPITZ_GPIO_BAT_COVER       (90)
+#define SPITZ_GPIO_CF_CD           (94)
+#define SPITZ_GPIO_ON_KEY          (95)
+#define SPITZ_GPIO_SWA             (97)
+#define SPITZ_GPIO_SWB             (96)
+#define SPITZ_GPIO_CHRG_FULL       (101)
+#define SPITZ_GPIO_CO              (101)
+#define SPITZ_GPIO_CF_IRQ          (105)
+#define SPITZ_GPIO_AC_IN           (115)
+#define SPITZ_GPIO_HP_IN           (116)
+
+/* Spitz Only GPIOs */
+
+#define SPITZ_GPIO_CF2_IRQ         (106) /* CF slot1 Ready */
+#define SPITZ_GPIO_CF2_CD          (93)
+
+
+/* Spitz/Akita Keyboard Definitions */
+
+#define SPITZ_KEY_STROBE_NUM         (11)
+#define SPITZ_KEY_SENSE_NUM          (7)
+#define SPITZ_GPIO_G0_STROBE_BIT     0x0f800000
+#define SPITZ_GPIO_G1_STROBE_BIT     0x00100000
+#define SPITZ_GPIO_G2_STROBE_BIT     0x01000000
+#define SPITZ_GPIO_G3_STROBE_BIT     0x00041880
+#define SPITZ_GPIO_G0_SENSE_BIT      0x00021000
+#define SPITZ_GPIO_G1_SENSE_BIT      0x000000d4
+#define SPITZ_GPIO_G2_SENSE_BIT      0x08000000
+#define SPITZ_GPIO_G3_SENSE_BIT      0x00000000
+
+#define SPITZ_GPIO_KEY_STROBE0       88
+#define SPITZ_GPIO_KEY_STROBE1       23
+#define SPITZ_GPIO_KEY_STROBE2       24
+#define SPITZ_GPIO_KEY_STROBE3       25
+#define SPITZ_GPIO_KEY_STROBE4       26
+#define SPITZ_GPIO_KEY_STROBE5       27
+#define SPITZ_GPIO_KEY_STROBE6       52
+#define SPITZ_GPIO_KEY_STROBE7       103
+#define SPITZ_GPIO_KEY_STROBE8       107
+#define SPITZ_GPIO_KEY_STROBE9       108
+#define SPITZ_GPIO_KEY_STROBE10      114
+
+#define SPITZ_GPIO_KEY_SENSE0        12
+#define SPITZ_GPIO_KEY_SENSE1        17
+#define SPITZ_GPIO_KEY_SENSE2        91
+#define SPITZ_GPIO_KEY_SENSE3        34
+#define SPITZ_GPIO_KEY_SENSE4        36
+#define SPITZ_GPIO_KEY_SENSE5        38
+#define SPITZ_GPIO_KEY_SENSE6        39
+
+
+/* Spitz Scoop Device (No. 1) GPIOs */
+/* Suspend States in comments */
+#define SPITZ_SCP_LED_GREEN     SCOOP_GPCR_PA11  /* Keep */
+#define SPITZ_SCP_JK_B          SCOOP_GPCR_PA12  /* Keep */
+#define SPITZ_SCP_CHRG_ON       SCOOP_GPCR_PA13  /* Keep */
+#define SPITZ_SCP_MUTE_L        SCOOP_GPCR_PA14  /* Low */
+#define SPITZ_SCP_MUTE_R        SCOOP_GPCR_PA15  /* Low */
+#define SPITZ_SCP_CF_POWER      SCOOP_GPCR_PA16  /* Keep */
+#define SPITZ_SCP_LED_ORANGE    SCOOP_GPCR_PA17  /* Keep */
+#define SPITZ_SCP_JK_A          SCOOP_GPCR_PA18  /* Low */
+#define SPITZ_SCP_ADC_TEMP_ON   SCOOP_GPCR_PA19  /* Low */
+
+#define SPITZ_SCP_IO_DIR      (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
+                               SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
+                               SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
+#define SPITZ_SCP_IO_OUT      (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
+#define SPITZ_SCP_SUS_CLR     (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
+#define SPITZ_SCP_SUS_SET     0
+
+/* Spitz Scoop Device (No. 2) GPIOs */
+/* Suspend States in comments */
+#define SPITZ_SCP2_IR_ON           SCOOP_GPCR_PA11  /* High */
+#define SPITZ_SCP2_AKIN_PULLUP     SCOOP_GPCR_PA12  /* Keep */
+#define SPITZ_SCP2_RESERVED_1      SCOOP_GPCR_PA13  /* High */
+#define SPITZ_SCP2_RESERVED_2      SCOOP_GPCR_PA14  /* Low */
+#define SPITZ_SCP2_RESERVED_3      SCOOP_GPCR_PA15  /* Low */
+#define SPITZ_SCP2_RESERVED_4      SCOOP_GPCR_PA16  /* Low */
+#define SPITZ_SCP2_BACKLIGHT_CONT  SCOOP_GPCR_PA17  /* Low */
+#define SPITZ_SCP2_BACKLIGHT_ON    SCOOP_GPCR_PA18  /* Low */
+#define SPITZ_SCP2_MIC_BIAS        SCOOP_GPCR_PA19  /* Low */
+
+#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
+                           SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
+                           SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+
+#define SPITZ_SCP2_IO_OUT   (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
+#define SPITZ_SCP2_SUS_CLR  (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
+                             SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+#define SPITZ_SCP2_SUS_SET  (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
+
+
+/* Spitz IRQ Definitions */
+
+#define SPITZ_IRQ_GPIO_KEY_INT        IRQ_GPIO(SPITZ_GPIO_KEY_INT)
+#define SPITZ_IRQ_GPIO_AC_IN          IRQ_GPIO(SPITZ_GPIO_AC_IN)
+#define SPITZ_IRQ_GPIO_AK_INT         IRQ_GPIO(SPITZ_GPIO_AK_INT)
+#define SPITZ_IRQ_GPIO_HP_IN          IRQ_GPIO(SPITZ_GPIO_HP_IN)
+#define SPITZ_IRQ_GPIO_TP_INT         IRQ_GPIO(SPITZ_GPIO_TP_INT)
+#define SPITZ_IRQ_GPIO_SYNC           IRQ_GPIO(SPITZ_GPIO_SYNC)
+#define SPITZ_IRQ_GPIO_ON_KEY         IRQ_GPIO(SPITZ_GPIO_ON_KEY)
+#define SPITZ_IRQ_GPIO_SWA            IRQ_GPIO(SPITZ_GPIO_SWA)
+#define SPITZ_IRQ_GPIO_SWB            IRQ_GPIO(SPITZ_GPIO_SWB)
+#define SPITZ_IRQ_GPIO_BAT_COVER      IRQ_GPIO(SPITZ_GPIO_BAT_COVER)
+#define SPITZ_IRQ_GPIO_FATAL_BAT      IRQ_GPIO(SPITZ_GPIO_FATAL_BAT)
+#define SPITZ_IRQ_GPIO_CO             IRQ_GPIO(SPITZ_GPIO_CO)
+#define SPITZ_IRQ_GPIO_CF_IRQ         IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
+#define SPITZ_IRQ_GPIO_CF_CD          IRQ_GPIO(SPITZ_GPIO_CF_CD)
+#define SPITZ_IRQ_GPIO_CF2_IRQ        IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
+#define SPITZ_IRQ_GPIO_nSD_INT        IRQ_GPIO(SPITZ_GPIO_nSD_INT)
+#define SPITZ_IRQ_GPIO_nSD_DETECT     IRQ_GPIO(SPITZ_GPIO_nSD_DETECT)
+
+/*
+ * Shared data structures
+ */
+extern struct platform_device spitzscoop_device;
+extern struct platform_device spitzscoop2_device;
+extern struct platform_device spitzssp_device;
+extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h
new file mode 100644
index 000000000000..a012882c9ee6
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/ssp.h
@@ -0,0 +1,83 @@
+/*
+ *  ssp.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver supports the following PXA CPU/SSP ports:-
+ *
+ *       PXA250     SSP
+ *       PXA255     SSP, NSSP
+ *       PXA26x     SSP, NSSP, ASSP
+ *       PXA27x     SSP1, SSP2, SSP3
+ *       PXA3xx     SSP1, SSP2, SSP3, SSP4
+ */
+
+#ifndef __ASM_ARCH_SSP_H
+#define __ASM_ARCH_SSP_H
+
+#include <linux/list.h>
+
+enum pxa_ssp_type {
+	SSP_UNDEFINED = 0,
+	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
+	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
+	PXA27x_SSP,
+};
+
+struct ssp_device {
+	struct platform_device *pdev;
+	struct list_head	node;
+
+	struct clk	*clk;
+	void __iomem	*mmio_base;
+	unsigned long	phys_base;
+
+	const char	*label;
+	int		port_id;
+	int		type;
+	int		use_count;
+	int		irq;
+	int		drcmr_rx;
+	int		drcmr_tx;
+};
+
+/*
+ * SSP initialisation flags
+ */
+#define SSP_NO_IRQ	0x1		/* don't register an irq handler in SSP driver */
+
+struct ssp_state {
+	u32	cr0;
+	u32 cr1;
+	u32 to;
+	u32 psp;
+};
+
+struct ssp_dev {
+	struct ssp_device *ssp;
+	u32 port;
+	u32 mode;
+	u32 flags;
+	u32 psp_flags;
+	u32 speed;
+	int irq;
+};
+
+int ssp_write_word(struct ssp_dev *dev, u32 data);
+int ssp_read_word(struct ssp_dev *dev, u32 *data);
+int ssp_flush(struct ssp_dev *dev);
+void ssp_enable(struct ssp_dev *dev);
+void ssp_disable(struct ssp_dev *dev);
+void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp);
+void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp);
+int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags);
+int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
+void ssp_exit(struct ssp_dev *dev);
+
+struct ssp_device *ssp_request(int port, const char *label);
+void ssp_free(struct ssp_device *);
+#endif /* __ASM_ARCH_SSP_H */
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
new file mode 100644
index 000000000000..0f381e692999
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/system.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-pxa/include/mach/system.h
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Jun 15, 2001
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/proc-fns.h>
+#include "hardware.h"
+#include "pxa2xx-regs.h"
+#include "pxa-regs.h"
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+
+void arch_reset(char mode);
diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h
new file mode 100644
index 000000000000..b05fc6683c47
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-pxa/include/mach/timex.h
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Jun 15, 2001
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#if defined(CONFIG_PXA25x)
+/* PXA250/210 timer base */
+#define CLOCK_TICK_RATE 3686400
+#elif defined(CONFIG_PXA27x)
+/* PXA27x timer base */
+#ifdef CONFIG_MACH_MAINSTONE
+#define CLOCK_TICK_RATE 3249600
+#else
+#define CLOCK_TICK_RATE 3250000
+#endif
+#else
+#define CLOCK_TICK_RATE 3250000
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
new file mode 100644
index 000000000000..a72803f0461b
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -0,0 +1,198 @@
+/*
+ * Hardware specific definitions for Sharp SL-C6000x series of PDAs
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef _ASM_ARCH_TOSA_H_
+#define _ASM_ARCH_TOSA_H_ 1
+
+/*  TOSA Chip selects  */
+#define TOSA_LCDC_PHYS		PXA_CS4_PHYS
+/* Internel Scoop */
+#define TOSA_CF_PHYS		(PXA_CS2_PHYS + 0x00800000)
+/* Jacket Scoop */
+#define TOSA_SCOOP_PHYS  	(PXA_CS5_PHYS + 0x00800000)
+
+/*
+ * SCOOP2 internal GPIOs
+ */
+#define TOSA_SCOOP_GPIO_BASE		NR_BUILTIN_GPIO
+#define TOSA_SCOOP_PXA_VCORE1		SCOOP_GPCR_PA11
+#define TOSA_GPIO_TC6393XB_REST_IN	(TOSA_SCOOP_GPIO_BASE + 1)
+#define TOSA_GPIO_IR_POWERDWN		(TOSA_SCOOP_GPIO_BASE + 2)
+#define TOSA_GPIO_SD_WP			(TOSA_SCOOP_GPIO_BASE + 3)
+#define TOSA_GPIO_PWR_ON		(TOSA_SCOOP_GPIO_BASE + 4)
+#define TOSA_SCOOP_AUD_PWR_ON		SCOOP_GPCR_PA16
+#define TOSA_GPIO_BT_RESET		(TOSA_SCOOP_GPIO_BASE + 6)
+#define TOSA_GPIO_BT_PWR_EN		(TOSA_SCOOP_GPIO_BASE + 7)
+#define TOSA_SCOOP_AC_IN_OL		SCOOP_GPCR_PA19
+
+/* GPIO Direction   1 : output mode / 0:input mode */
+#define TOSA_SCOOP_IO_DIR     (TOSA_SCOOP_PXA_VCORE1 | \
+		TOSA_SCOOP_AUD_PWR_ON)
+
+/*
+ * SCOOP2 jacket GPIOs
+ */
+#define TOSA_SCOOP_JC_GPIO_BASE		(NR_BUILTIN_GPIO + 12)
+#define TOSA_GPIO_BT_LED		(TOSA_SCOOP_JC_GPIO_BASE + 0)
+#define TOSA_GPIO_NOTE_LED		(TOSA_SCOOP_JC_GPIO_BASE + 1)
+#define TOSA_GPIO_CHRG_ERR_LED		(TOSA_SCOOP_JC_GPIO_BASE + 2)
+#define TOSA_GPIO_USB_PULLUP		(TOSA_SCOOP_JC_GPIO_BASE + 3)
+#define TOSA_GPIO_TC6393XB_SUSPEND	(TOSA_SCOOP_JC_GPIO_BASE + 4)
+#define TOSA_GPIO_TC6393XB_L3V_ON	(TOSA_SCOOP_JC_GPIO_BASE + 5)
+#define TOSA_SCOOP_JC_WLAN_DETECT	SCOOP_GPCR_PA17
+#define TOSA_GPIO_WLAN_LED		(TOSA_SCOOP_JC_GPIO_BASE + 7)
+#define TOSA_SCOOP_JC_CARD_LIMIT_SEL	SCOOP_GPCR_PA19
+
+/* GPIO Direction   1 : output mode / 0:input mode */
+#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL)
+
+/*
+ * TC6393XB GPIOs
+ */
+#define TOSA_TC6393XB_GPIO_BASE		(NR_BUILTIN_GPIO + 2 * 12)
+#define TOSA_TC6393XB_GPIO(i)		(TOSA_TC6393XB_GPIO_BASE + (i))
+#define TOSA_TC6393XB_GPIO_BIT(gpio)	(1 << (gpio - TOSA_TC6393XB_GPIO_BASE))
+
+#define TOSA_GPIO_TG_ON			(TOSA_TC6393XB_GPIO_BASE + 0)
+#define TOSA_GPIO_L_MUTE		(TOSA_TC6393XB_GPIO_BASE + 1)
+#define TOSA_GPIO_BL_C20MA		(TOSA_TC6393XB_GPIO_BASE + 3)
+#define TOSA_GPIO_CARD_VCC_ON		(TOSA_TC6393XB_GPIO_BASE + 4)
+#define TOSA_GPIO_CHARGE_OFF		(TOSA_TC6393XB_GPIO_BASE + 6)
+#define TOSA_GPIO_CHARGE_OFF_JC		(TOSA_TC6393XB_GPIO_BASE + 7)
+#define TOSA_GPIO_BAT0_V_ON		(TOSA_TC6393XB_GPIO_BASE + 9)
+#define TOSA_GPIO_BAT1_V_ON		(TOSA_TC6393XB_GPIO_BASE + 10)
+#define TOSA_GPIO_BU_CHRG_ON		(TOSA_TC6393XB_GPIO_BASE + 11)
+#define TOSA_GPIO_BAT_SW_ON		(TOSA_TC6393XB_GPIO_BASE + 12)
+#define TOSA_GPIO_BAT0_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 14)
+#define TOSA_GPIO_BAT1_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 15)
+
+/*
+ * Timing Generator
+ */
+#define TG_PNLCTL 			0x00
+#define TG_TPOSCTL 			0x01
+#define TG_DUTYCTL 			0x02
+#define TG_GPOSR 			0x03
+#define TG_GPODR1 			0x04
+#define TG_GPODR2 			0x05
+#define TG_PINICTL 			0x06
+#define TG_HPOSCTL 			0x07
+
+/*
+ * PXA GPIOs
+ */
+#define TOSA_GPIO_POWERON		(0)
+#define TOSA_GPIO_RESET			(1)
+#define TOSA_GPIO_AC_IN			(2)
+#define TOSA_GPIO_RECORD_BTN		(3)
+#define TOSA_GPIO_SYNC			(4)	/* Cradle SYNC Button */
+#define TOSA_GPIO_USB_IN		(5)
+#define TOSA_GPIO_JACKET_DETECT		(7)
+#define TOSA_GPIO_nSD_DETECT		(9)
+#define TOSA_GPIO_nSD_INT		(10)
+#define TOSA_GPIO_TC6393XB_CLK		(11)
+#define TOSA_GPIO_BAT1_CRG		(12)
+#define TOSA_GPIO_CF_CD			(13)
+#define TOSA_GPIO_BAT0_CRG		(14)
+#define TOSA_GPIO_TC6393XB_INT		(15)
+#define TOSA_GPIO_BAT0_LOW		(17)
+#define TOSA_GPIO_TC6393XB_RDY		(18)
+#define TOSA_GPIO_ON_RESET		(19)
+#define TOSA_GPIO_EAR_IN		(20)
+#define TOSA_GPIO_CF_IRQ		(21)	/* CF slot0 Ready */
+#define TOSA_GPIO_ON_KEY		(22)
+#define TOSA_GPIO_VGA_LINE		(27)
+#define TOSA_GPIO_TP_INT		(32)	/* Touch Panel pen down interrupt */
+#define TOSA_GPIO_JC_CF_IRQ		(36)	/* CF slot1 Ready */
+#define TOSA_GPIO_BAT_LOCKED		(38)	/* Battery locked */
+#define TOSA_GPIO_IRDA_TX		(47)
+#define TOSA_GPIO_TG_SPI_SCLK		(81)
+#define TOSA_GPIO_TG_SPI_CS		(82)
+#define TOSA_GPIO_TG_SPI_MOSI		(83)
+#define TOSA_GPIO_BAT1_LOW		(84)
+
+#define TOSA_GPIO_HP_IN			GPIO_EAR_IN
+
+#define TOSA_GPIO_MAIN_BAT_LOW		GPIO_BAT0_LOW
+
+#define TOSA_KEY_STROBE_NUM		(11)
+#define TOSA_KEY_SENSE_NUM		(7)
+
+#define TOSA_GPIO_HIGH_STROBE_BIT	(0xfc000000)
+#define TOSA_GPIO_LOW_STROBE_BIT	(0x0000001f)
+#define TOSA_GPIO_ALL_SENSE_BIT		(0x00000fe0)
+#define TOSA_GPIO_ALL_SENSE_RSHIFT	(5)
+#define TOSA_GPIO_STROBE_BIT(a)		GPIO_bit(58+(a))
+#define TOSA_GPIO_SENSE_BIT(a)		GPIO_bit(69+(a))
+#define TOSA_GAFR_HIGH_STROBE_BIT	(0xfff00000)
+#define TOSA_GAFR_LOW_STROBE_BIT	(0x000003ff)
+#define TOSA_GAFR_ALL_SENSE_BIT		(0x00fffc00)
+#define TOSA_GPIO_KEY_SENSE(a) 		(69+(a))
+#define TOSA_GPIO_KEY_STROBE(a)		(58+(a))
+
+/*
+ * Interrupts
+ */
+#define TOSA_IRQ_GPIO_WAKEUP        	IRQ_GPIO(TOSA_GPIO_WAKEUP)
+#define TOSA_IRQ_GPIO_AC_IN         	IRQ_GPIO(TOSA_GPIO_AC_IN)
+#define TOSA_IRQ_GPIO_RECORD_BTN    	IRQ_GPIO(TOSA_GPIO_RECORD_BTN)
+#define TOSA_IRQ_GPIO_SYNC          	IRQ_GPIO(TOSA_GPIO_SYNC)
+#define TOSA_IRQ_GPIO_USB_IN        	IRQ_GPIO(TOSA_GPIO_USB_IN)
+#define TOSA_IRQ_GPIO_JACKET_DETECT 	IRQ_GPIO(TOSA_GPIO_JACKET_DETECT)
+#define TOSA_IRQ_GPIO_nSD_INT       	IRQ_GPIO(TOSA_GPIO_nSD_INT)
+#define TOSA_IRQ_GPIO_nSD_DETECT    	IRQ_GPIO(TOSA_GPIO_nSD_DETECT)
+#define TOSA_IRQ_GPIO_BAT1_CRG      	IRQ_GPIO(TOSA_GPIO_BAT1_CRG)
+#define TOSA_IRQ_GPIO_CF_CD         	IRQ_GPIO(TOSA_GPIO_CF_CD)
+#define TOSA_IRQ_GPIO_BAT0_CRG      	IRQ_GPIO(TOSA_GPIO_BAT0_CRG)
+#define TOSA_IRQ_GPIO_TC6393XB_INT    	IRQ_GPIO(TOSA_GPIO_TC6393XB_INT)
+#define TOSA_IRQ_GPIO_BAT0_LOW      	IRQ_GPIO(TOSA_GPIO_BAT0_LOW)
+#define TOSA_IRQ_GPIO_EAR_IN        	IRQ_GPIO(TOSA_GPIO_EAR_IN)
+#define TOSA_IRQ_GPIO_CF_IRQ        	IRQ_GPIO(TOSA_GPIO_CF_IRQ)
+#define TOSA_IRQ_GPIO_ON_KEY        	IRQ_GPIO(TOSA_GPIO_ON_KEY)
+#define TOSA_IRQ_GPIO_VGA_LINE      	IRQ_GPIO(TOSA_GPIO_VGA_LINE)
+#define TOSA_IRQ_GPIO_TP_INT        	IRQ_GPIO(TOSA_GPIO_TP_INT)
+#define TOSA_IRQ_GPIO_JC_CF_IRQ     	IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ)
+#define TOSA_IRQ_GPIO_BAT_LOCKED    	IRQ_GPIO(TOSA_GPIO_BAT_LOCKED)
+#define TOSA_IRQ_GPIO_BAT1_LOW      	IRQ_GPIO(TOSA_GPIO_BAT1_LOW)
+#define TOSA_IRQ_GPIO_KEY_SENSE(a)  	IRQ_GPIO(69+(a))
+
+#define TOSA_IRQ_GPIO_MAIN_BAT_LOW 	IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW)
+
+#define TOSA_KEY_SYNC		KEY_102ND /* ??? */
+
+#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES
+#define TOSA_KEY_RECORD		KEY_YEN
+#define TOSA_KEY_ADDRESSBOOK	KEY_KATAKANA
+#define TOSA_KEY_CANCEL		KEY_ESC
+#define TOSA_KEY_CENTER		KEY_HIRAGANA
+#define TOSA_KEY_OK		KEY_HENKAN
+#define TOSA_KEY_CALENDAR	KEY_KATAKANAHIRAGANA
+#define TOSA_KEY_HOMEPAGE	KEY_HANGEUL
+#define TOSA_KEY_LIGHT		KEY_MUHENKAN
+#define TOSA_KEY_MENU		KEY_HANJA
+#define TOSA_KEY_FN		KEY_RIGHTALT
+#define TOSA_KEY_MAIL		KEY_ZENKAKUHANKAKU
+#else
+#define TOSA_KEY_RECORD		KEY_RECORD
+#define TOSA_KEY_ADDRESSBOOK	KEY_ADDRESSBOOK
+#define TOSA_KEY_CANCEL		KEY_CANCEL
+#define TOSA_KEY_CENTER		KEY_SELECT /* ??? */
+#define TOSA_KEY_OK		KEY_OK
+#define TOSA_KEY_CALENDAR	KEY_CALENDAR
+#define TOSA_KEY_HOMEPAGE	KEY_HOMEPAGE
+#define TOSA_KEY_LIGHT		KEY_KBDILLUMTOGGLE
+#define TOSA_KEY_MENU		KEY_MENU
+#define TOSA_KEY_FN		KEY_FN
+#define TOSA_KEY_MAIL		KEY_MAIL
+#endif
+
+#endif /* _ASM_ARCH_TOSA_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/tosa_bt.h b/arch/arm/mach-pxa/include/mach/tosa_bt.h
new file mode 100644
index 000000000000..efc3c3d3b75d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/tosa_bt.h
@@ -0,0 +1,22 @@
+/*
+ * Tosa bluetooth built-in chip control.
+ *
+ * Later it may be shared with some other platforms.
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef TOSA_BT_H
+#define TOSA_BT_H
+
+struct tosa_bt_data {
+	int gpio_pwr;
+	int gpio_reset;
+};
+
+#endif
+
diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
new file mode 100644
index 000000000000..641d0ec110bb
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
@@ -0,0 +1,106 @@
+/************************************************************************
+ * Include file for TRIZEPS4 SoM and ConXS eval-board
+ * Copyright (c) Jürgen Schindele
+ * 2006
+ ************************************************************************/
+
+/*
+ * Includes/Defines
+ */
+#ifndef _TRIPEPS4_H_
+#define _TRIPEPS4_H_
+
+/* physical memory regions */
+#define TRIZEPS4_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
+#define TRIZEPS4_DISK_PHYS	(PXA_CS1_PHYS)  /* Disk On Chip region */
+#define TRIZEPS4_ETH_PHYS	(PXA_CS2_PHYS)  /* Ethernet DM9000 region */
+#define TRIZEPS4_PIC_PHYS	(PXA_CS3_PHYS)	/* Logic chip on ConXS-Board */
+#define TRIZEPS4_SDRAM_BASE	0xa0000000      /* SDRAM region */
+
+#define TRIZEPS4_CFSR_PHYS	(PXA_CS3_PHYS)			/* Logic chip on ConXS-Board CSFR register */
+#define TRIZEPS4_BOCR_PHYS	(PXA_CS3_PHYS+0x02000000)	/* Logic chip on ConXS-Board BOCR register */
+#define TRIZEPS4_IRCR_PHYS	(PXA_CS3_PHYS+0x02400000)	/* Logic chip on ConXS-Board IRCR register*/
+#define TRIZEPS4_UPSR_PHYS	(PXA_CS3_PHYS+0x02800000)	/* Logic chip on ConXS-Board UPSR register*/
+#define TRIZEPS4_DICR_PHYS	(PXA_CS3_PHYS+0x03800000)	/* Logic chip on ConXS-Board DICR register*/
+
+/* virtual memory regions */
+#define TRIZEPS4_DISK_VIRT	0xF0000000	/* Disk On Chip region */
+
+#define TRIZEPS4_PIC_VIRT	0xF0100000	/* not used */
+#define TRIZEPS4_CFSR_VIRT	0xF0100000
+#define TRIZEPS4_BOCR_VIRT	0xF0200000
+#define TRIZEPS4_DICR_VIRT	0xF0300000
+#define TRIZEPS4_IRCR_VIRT	0xF0400000
+#define TRIZEPS4_UPSR_VIRT	0xF0500000
+
+/* size of flash */
+#define TRIZEPS4_FLASH_SIZE	0x02000000	/* Flash size 32 MB */
+
+/* Ethernet Controller Davicom DM9000 */
+#define GPIO_DM9000		101
+#define TRIZEPS4_ETH_IRQ	IRQ_GPIO(GPIO_DM9000)
+
+/* UCB1400 audio / TS-controller */
+#define GPIO_UCB1400		1
+#define TRIZEPS4_UCB1400_IRQ	IRQ_GPIO(GPIO_UCB1400)
+
+/* PCMCIA socket Compact Flash */
+#define GPIO_PCD		11		/* PCMCIA Card Detect */
+#define TRIZEPS4_CD_IRQ		IRQ_GPIO(GPIO_PCD)
+#define GPIO_PRDY		13		/* READY / nINT */
+#define TRIZEPS4_READY_NINT	IRQ_GPIO(GPIO_PRDY)
+
+/* MMC socket */
+#define GPIO_MMC_DET		12
+#define TRIZEPS4_MMC_IRQ	IRQ_GPIO(GPIO_MMC_DET)
+
+/* LEDS using tx2 / rx2 */
+#define GPIO_SYS_BUSY_LED	46
+#define GPIO_HEARTBEAT_LED	47
+
+/* Off-module PIC on ConXS board */
+#define GPIO_PIC		0
+#define TRIZEPS4_PIC_IRQ	IRQ_GPIO(GPIO_PIC)
+
+#define CFSR_P2V(x)		((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
+#define CFSR_V2P(x)		((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
+
+#define BCR_P2V(x)		((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
+#define BCR_V2P(x)		((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
+
+#define DCR_P2V(x)		((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
+#define DCR_V2P(x)		((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
+
+#ifndef __ASSEMBLY__
+#define ConXS_CFSR		(*((volatile unsigned short *)CFSR_P2V(0x0C000000)))
+#define ConXS_BCR		(*((volatile unsigned short *)BCR_P2V(0x0E000000)))
+#define ConXS_DCR		(*((volatile unsigned short *)DCR_P2V(0x0F800000)))
+#else
+#define ConXS_CFSR		CFSR_P2V(0x0C000000)
+#define ConXS_BCR		BCR_P2V(0x0E000000)
+#define ConXS_DCR		DCR_P2V(0x0F800000)
+#endif
+
+#define ConXS_CFSR_BVD_MASK	0x0003
+#define ConXS_CFSR_BVD1		(1 << 0)
+#define ConXS_CFSR_BVD2		(1 << 1)
+#define ConXS_CFSR_VS_MASK	0x000C
+#define ConXS_CFSR_VS1		(1 << 2)
+#define ConXS_CFSR_VS2		(1 << 3)
+#define ConXS_CFSR_VS_5V	(0x3 << 2)
+#define ConXS_CFSR_VS_3V3	0x0
+
+#define ConXS_BCR_S0_POW_EN0	(1 << 0)
+#define ConXS_BCR_S0_POW_EN1	(1 << 1)
+#define ConXS_BCR_L_DISP	(1 << 4)
+#define ConXS_BCR_CF_BUF_EN	(1 << 5)
+#define ConXS_BCR_CF_RESET	(1 << 7)
+#define ConXS_BCR_S0_VCC_3V3	0x1
+#define ConXS_BCR_S0_VCC_5V0	0x2
+#define ConXS_BCR_S0_VPP_12V	0x4
+#define ConXS_BCR_S0_VPP_3V3	0x8
+
+#define ConXS_IRCR_MODE		(1 << 0)
+#define ConXS_IRCR_SD		(1 << 1)
+
+#endif /* _TRIPEPS4_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/udc.h b/arch/arm/mach-pxa/include/mach/udc.h
new file mode 100644
index 000000000000..2f82332e81a0
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/udc.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-pxa/include/mach/udc.h
+ *
+ */
+#include <asm/mach/udc_pxa2xx.h>
+
+extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
+
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
new file mode 100644
index 000000000000..21e3e890af98
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-pxa/include/mach/uncompress.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/pxa-regs.h>
+#include <asm/mach-types.h>
+
+#define __REG(x)       ((volatile unsigned long *)x)
+
+static volatile unsigned long *UART = FFUART;
+
+static inline void putc(char c)
+{
+	if (!(UART[UART_IER] & IER_UUE))
+		return;
+	while (!(UART[UART_LSR] & LSR_TDRQ))
+		barrier();
+	UART[UART_TX] = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+	if (machine_is_littleton())
+		UART = STUART;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pxa/include/mach/vmalloc.h b/arch/arm/mach-pxa/include/mach/vmalloc.h
new file mode 100644
index 000000000000..e90c5eeb81dd
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/vmalloc.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-pxa/include/mach/vmalloc.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VMALLOC_END       (0xe8000000)
diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
new file mode 100644
index 000000000000..0d35ca04731e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
@@ -0,0 +1,47 @@
+#ifndef __ASM_ARCH_ZYLONITE_H
+#define __ASM_ARCH_ZYLONITE_H
+
+#define ZYLONITE_ETH_PHYS	0x14000000
+
+#define EXT_GPIO(x)		(128 + (x))
+
+/* the following variables are processor specific and initialized
+ * by the corresponding zylonite_pxa3xx_init()
+ */
+struct platform_mmc_slot {
+	int gpio_cd;
+	int gpio_wp;
+};
+
+extern struct platform_mmc_slot zylonite_mmc_slot[];
+
+extern int gpio_eth_irq;
+extern int gpio_debug_led1;
+extern int gpio_debug_led2;
+
+extern int wm9713_irq;
+
+extern int lcd_id;
+extern int lcd_orientation;
+
+#ifdef CONFIG_CPU_PXA300
+extern void zylonite_pxa300_init(void);
+#else
+static inline void zylonite_pxa300_init(void)
+{
+	if (cpu_is_pxa300() || cpu_is_pxa310())
+		panic("%s: PXA300/PXA310 not supported\n", __FUNCTION__);
+}
+#endif
+
+#ifdef CONFIG_CPU_PXA320
+extern void zylonite_pxa320_init(void);
+#else
+static inline void zylonite_pxa320_init(void)
+{
+	if (cpu_is_pxa320())
+		panic("%s: PXA320 not supported\n", __FUNCTION__);
+}
+#endif
+
+#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index fbff557bb225..5e95c5372fec 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -17,10 +17,10 @@
 #include <linux/interrupt.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
index 38aa9270540e..18b20d469410 100644
--- a/arch/arm/mach-pxa/leds-idp.c
+++ b/arch/arm/mach-pxa/leds-idp.c
@@ -14,12 +14,12 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/idp.h>
+#include <mach/pxa-regs.h>
+#include <mach/idp.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
index afbc6698e27c..1a258029c33c 100644
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ b/arch/arm/mach-pxa/leds-lubbock.c
@@ -13,11 +13,11 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
index 065293eb0d82..95e06b849634 100644
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ b/arch/arm/mach-pxa/leds-mainstone.c
@@ -12,12 +12,12 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mainstone.h>
+#include <mach/pxa-regs.h>
+#include <mach/mainstone.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c
index 21880daabafe..3bc29007df3a 100644
--- a/arch/arm/mach-pxa/leds-trizeps4.c
+++ b/arch/arm/mach-pxa/leds-trizeps4.c
@@ -12,14 +12,14 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/types.h>
 #include <asm/leds.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/trizeps4.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/trizeps4.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 530654474bb2..58f3402a0375 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,25 +20,27 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mfp-pxa300.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/littleton.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/ssp.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa3xx_nand.h>
+#include <mach/littleton.h>
 
 #include "generic.h"
 
@@ -101,18 +103,26 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
 		.end	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	}
 };
 
+static struct smc91x_platdata littleton_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &littleton_smc91x_info,
+	},
 };
 
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES)
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 /* use bit 30, 31 as the indicator of command parameter number */
 #define CMD0(x)		((0x00000000) | ((x) << 9))
 #define CMD1(x, x1)	((0x40000000) | ((x) << 9) | 0x100 | (x1))
@@ -311,9 +321,9 @@ static void littleton_init_lcd(void)
 }
 #else
 static inline void littleton_init_lcd(void) {};
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int littleton_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
@@ -361,6 +371,57 @@ static void __init littleton_init_keypad(void)
 static inline void littleton_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition littleton_nand_partitions[] = {
+	[0] = {
+		.name        = "Bootloader",
+		.offset      = 0,
+		.size        = 0x060000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "Kernel",
+		.offset      = 0x060000,
+		.size        = 0x200000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Filesystem",
+		.offset      = 0x0260000,
+		.size        = 0x3000000,     /* 48M - rootfs */
+	},
+	[3] = {
+		.name        = "MassStorage",
+		.offset      = 0x3260000,
+		.size        = 0x3d40000,
+	},
+	[4] = {
+		.name        = "BBT",
+		.offset      = 0x6FA0000,
+		.size        = 0x80000,
+		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
+	},
+	/* NOTE: we reserve some blocks at the end of the NAND flash for
+	 * bad block management, and the max number of relocation blocks
+	 * differs on different platforms. Please take care with it when
+	 * defining the partition table.
+	 */
+};
+
+static struct pxa3xx_nand_platform_data littleton_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= littleton_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(littleton_nand_partitions),
+};
+
+static void __init littleton_init_nand(void)
+{
+	pxa3xx_set_nand_info(&littleton_nand_info);
+}
+#else
+static inline void littleton_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
 static void __init littleton_init(void)
 {
 	/* initialize MFP configurations */
@@ -374,6 +435,7 @@ static void __init littleton_init(void)
 
 	littleton_init_lcd();
 	littleton_init_keypad();
+	littleton_init_nand();
 }
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index cc1c4fa06145..b7038948d1d4 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -29,7 +29,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -38,15 +38,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/lpd270.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/lpd270.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -113,7 +113,7 @@ static void __init lpd270_init_irq(void)
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 	set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index a3fae4139203..bb9e09208b9f 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -21,15 +21,16 @@
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/smc91x.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
-#include <asm/arch/pxa2xx_spi.h>
+#include <mach/pxa2xx_spi.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,15 +41,15 @@
 
 #include <asm/hardware/sa1111.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/lubbock.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/audio.h>
+#include <mach/lubbock.h>
+#include <mach/udc.h>
+#include <mach/irda.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -151,7 +152,7 @@ static void __init lubbock_init_irq(void)
 	}
 
 	set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM
@@ -223,15 +224,7 @@ static struct platform_device sa1111_device = {
  * for the temperature sensors.
  */
 static struct pxa2xx_spi_master pxa_ssp_master_info = {
-	.num_chipselect	= 0,
-};
-
-static struct platform_device pxa_ssp = {
-	.name		= "pxa2xx-spi",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &pxa_ssp_master_info,
-	},
+	.num_chipselect	= 1,
 };
 
 static int lubbock_ads7846_pendown_state(void)
@@ -292,11 +285,18 @@ static struct resource smc91x_resources[] = {
 	},
 };
 
+static struct smc91x_platdata lubbock_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &lubbock_smc91x_info,
+	},
 };
 
 static struct resource flash_resources[] = {
@@ -367,7 +367,6 @@ static struct platform_device *devices[] __initdata = {
 	&smc91x_device,
 	&lubbock_flash_device[0],
 	&lubbock_flash_device[1],
-	&pxa_ssp,
 };
 
 static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -471,6 +470,7 @@ static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
 	} else if (mode & IR_FIRMODE) {
 		LUB_MISC_WR |= 1 << 4;
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 	local_irq_restore(flags);
 }
 
@@ -501,6 +501,7 @@ static void __init lubbock_init(void)
 	lubbock_flash_data[flashboot].name = "boot-rom";
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
 
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 01b2fa790217..143f28adaf95 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -17,34 +17,32 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/mfd/htc-egpio.h>
 #include <linux/mfd/htc-pasic3.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
 #include <linux/pwm_backlight.h>
 
-#include <asm/gpio.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/magician.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/magician.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxafb.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "devices.h"
 #include "generic.h"
 
-static unsigned long magician_pin_config[] = {
+static unsigned long magician_pin_config[] __initdata = {
 
 	/* SDRAM and Static Memory I/O Signals */
 	GPIO20_nSDCS_2,
@@ -134,6 +132,7 @@ static unsigned long magician_pin_config[] = {
 static void magician_irda_transceiver_mode(struct device *dev, int mode)
 {
 	gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data magician_ficp_info = {
@@ -399,6 +398,7 @@ static struct platform_pwm_backlight_data backlight_data = {
 
 static struct platform_device backlight = {
 	.name = "pwm-backlight",
+	.id   = -1,
 	.dev  = {
 		.parent        = &pxa27x_device_pwm0.dev,
 		.platform_data = &backlight_data,
@@ -511,6 +511,37 @@ static struct platform_device pasic3 = {
  * External power
  */
 
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+	if (ret)
+		goto err_cs_ac;
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB");
+	if (ret)
+		goto err_cs_usb;
+	ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN");
+	if (ret)
+		goto err_chg_en;
+	ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN");
+	if (!ret)
+		ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0);
+	if (ret)
+		goto err_nchg_en;
+
+	return 0;
+
+err_nchg_en:
+	gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+err_chg_en:
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+err_cs_usb:
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+err_cs_ac:
+	return ret;
+}
+
 static int magician_is_ac_online(void)
 {
 	return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
@@ -527,14 +558,24 @@ static void magician_set_charge(int flags)
 	gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
 }
 
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO30_MAGICIAN_nCHARGE_EN);
+	gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+}
+
 static char *magician_supplicants[] = {
 	"ds2760-battery.0", "backup-battery"
 };
 
 static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
 	.is_ac_online    = magician_is_ac_online,
 	.is_usb_online   = magician_is_usb_online,
 	.set_charge      = magician_set_charge,
+	.exit            = power_supply_exit,
 	.supplied_to     = magician_supplicants,
 	.num_supplicants = ARRAY_SIZE(magician_supplicants),
 };
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f2e9e7c4da8e..d44af761564d 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -26,12 +26,13 @@
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
 #include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,17 +41,17 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/mainstone.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/mainstone.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x_keypad.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -110,9 +111,9 @@ static unsigned long mainstone_pin_config[] = {
 	GPIO45_AC97_SYSCLK,
 
 	/* Keypad */
-	GPIO93_KP_DKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO94_KP_DKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO95_KP_DKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO93_KP_DKIN_0,
+	GPIO94_KP_DKIN_1,
+	GPIO95_KP_DKIN_2,
 	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
 	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
 	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
@@ -190,7 +191,7 @@ static void __init mainstone_init_irq(void)
 	MST_INTSETCLR = 0;
 
 	set_irq_chained_handler(IRQ_GPIO(0), mainstone_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM
@@ -240,11 +241,19 @@ static struct resource smc91x_resources[] = {
 	}
 };
 
+static struct smc91x_platdata mainstone_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &mainstone_smc91x_info,
+	},
 };
 
 static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
@@ -455,6 +464,7 @@ static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
 	} else if (mode & IR_FIRMODE) {
 		MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 	if (mode & IR_OFF) {
 		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
 	} else {
@@ -513,7 +523,7 @@ static struct pxaohci_platform_data mainstone_ohci_platform_data = {
 	.init		= mainstone_ohci_init,
 };
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int mainstone_matrix_keys[] = {
 	KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
 	KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index d1cdb4ecb0b8..925575f10acf 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -18,10 +18,10 @@
 #include <linux/init.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa2xx.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa2xx.h>
 
 #include "generic.h"
 
@@ -39,6 +39,28 @@ struct gpio_desc {
 
 static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
 
+static int __mfp_config_lpm(unsigned gpio, unsigned long lpm)
+{
+	unsigned mask = GPIO_bit(gpio);
+
+	/* low power state */
+	switch (lpm) {
+	case MFP_LPM_DRIVE_HIGH:
+		PGSR(gpio) |= mask;
+		break;
+	case MFP_LPM_DRIVE_LOW:
+		PGSR(gpio) &= ~mask;
+		break;
+	case MFP_LPM_INPUT:
+		break;
+	default:
+		pr_warning("%s: invalid low power state for GPIO%d\n",
+				__func__, gpio);
+		return -EINVAL;
+	}
+	return 0;
+}
+
 static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 {
 	unsigned long gafr, mask = GPIO_bit(gpio);
@@ -57,21 +79,8 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 	else
 		GPDR(gpio) &= ~mask;
 
-	/* low power state */
-	switch (c & MFP_LPM_STATE_MASK) {
-	case MFP_LPM_DRIVE_HIGH:
-		PGSR(gpio) |= mask;
-		break;
-	case MFP_LPM_DRIVE_LOW:
-		PGSR(gpio) &= ~mask;
-		break;
-	case MFP_LPM_INPUT:
-		break;
-	default:
-		pr_warning("%s: invalid low power state for GPIO%d\n",
-				__func__, gpio);
+	if (__mfp_config_lpm(gpio, c & MFP_LPM_STATE_MASK))
 		return -EINVAL;
-	}
 
 	/* give early warning if MFP_LPM_CAN_WAKEUP is set on the
 	 * configurations of those pins not able to wakeup
@@ -91,6 +100,18 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 	return 0;
 }
 
+static inline int __mfp_validate(int mfp)
+{
+	int gpio = mfp_to_gpio(mfp);
+
+	if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
+		pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
+		return -1;
+	}
+
+	return gpio;
+}
+
 void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 {
 	unsigned long flags;
@@ -99,13 +120,9 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 
 	for (i = 0, c = mfp_cfgs; i < num; i++, c++) {
 
-		gpio = mfp_to_gpio(MFP_PIN(*c));
-
-		if (!gpio_desc[gpio].valid) {
-			pr_warning("%s: GPIO%d is invalid pin\n",
-				__func__, gpio);
+		gpio = __mfp_validate(MFP_PIN(*c));
+		if (gpio < 0)
 			continue;
-		}
 
 		local_irq_save(flags);
 
@@ -116,6 +133,20 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 	}
 }
 
+void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
+{
+	unsigned long flags;
+	int gpio;
+
+	gpio = __mfp_validate(mfp);
+	if (gpio < 0)
+		return;
+
+	local_irq_save(flags);
+	__mfp_config_lpm(gpio, lpm);
+	local_irq_restore(flags);
+}
+
 int gpio_set_wake(unsigned int gpio, unsigned int on)
 {
 	struct gpio_desc *d;
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index 3a5b0fcbaf1f..eb197a6e8e94 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -19,10 +19,10 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
-#include <asm/arch/pxa3xx-regs.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+#include <mach/pxa3xx-regs.h>
 
 /* mfp_spin_lock is used to ensure that MFP register configuration
  * (most likely a read-modify-write operation) is atomic, and that
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
new file mode 100644
index 000000000000..fe924a23debe
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -0,0 +1,416 @@
+/*
+ * Hardware definitions for PalmTX
+ *
+ * Author:     Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ *		Alex Osborne <ato@meshy.org>
+ *		Cristiano P. <cristianop@users.sourceforge.net>
+ *		Jan Herman <2hp@seznam.cz>
+ *		Michal Hrusecky
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmtx.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtx_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* USB */
+	GPIO13_GPIO,
+
+	/* PCMCIA */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
+				void *data)
+{
+	int err = 0;
+
+	/* Setup an interrupt for detecting card insert/remove events */
+	err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
+			IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"SD/MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+				__func__);
+		return err;
+	}
+
+	err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
+	if (err)
+		goto pwr_err;
+
+	err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
+	if (err)
+		goto ro_err;
+
+	printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+	return 0;
+
+ro_err:
+	gpio_free(GPIO_NR_PALMTX_SD_POWER);
+pwr_err:
+	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+	return err;
+}
+
+static void palmtx_mci_exit(struct device *dev, void *data)
+{
+	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+	gpio_free(GPIO_NR_PALMTX_SD_POWER);
+	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+}
+
+static void palmtx_mci_power(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+	gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmtx_mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmtx_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.setpower	= palmtx_mci_power,
+	.get_ro		= palmtx_mci_get_ro,
+	.init 		= palmtx_mci_init,
+	.exit		= palmtx_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmtx_matrix_keys[] = {
+	KEY(0, 0, KEY_POWER),
+	KEY(0, 1, KEY_F1),
+	KEY(0, 2, KEY_ENTER),
+
+	KEY(1, 0, KEY_F2),
+	KEY(1, 1, KEY_F3),
+	KEY(1, 2, KEY_F4),
+
+	KEY(2, 0, KEY_UP),
+	KEY(2, 2, KEY_DOWN),
+
+	KEY(3, 0, KEY_RIGHT),
+	KEY(3, 2, KEY_LEFT),
+
+};
+
+static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
+	.matrix_key_rows	= 4,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= palmtx_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(palmtx_matrix_keys),
+
+	.debounce_interval	= 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtx_pxa_buttons[] = {
+	{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
+	.buttons	= palmtx_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(palmtx_pxa_buttons),
+};
+
+static struct platform_device palmtx_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmtx_pxa_keys_data,
+	},
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtx_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
+	if (ret)
+		goto err2;
+
+	return 0;
+err2:
+	gpio_free(GPIO_NR_PALMTX_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmtx_backlight_notify(int brightness)
+{
+	gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
+	gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
+	return brightness;
+}
+
+static void palmtx_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_BL_POWER);
+	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtx_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= PALMTX_MAX_INTENSITY,
+	.dft_brightness	= PALMTX_MAX_INTENSITY,
+	.pwm_period_ns	= PALMTX_PERIOD_NS,
+	.init		= palmtx_backlight_init,
+	.notify		= palmtx_backlight_notify,
+	.exit		= palmtx_backlight_exit,
+};
+
+static struct platform_device palmtx_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &palmtx_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= palmtx_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static void palmtx_udc_command(int cmd)
+{
+	gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
+	udelay(50);
+	gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
+}
+
+static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
+	.gpio_vbus_inverted	= 1,
+	.udc_command		= palmtx_udc_command,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
+	if (ret)
+		goto err_cs_ac;
+
+	ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+	if (ret)
+		goto err_cs_usb;
+
+	return 0;
+
+err_cs_usb:
+	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+err_cs_ac:
+	return ret;
+}
+
+static int palmtx_is_ac_online(void)
+{
+	return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static int palmtx_is_usb_online(void)
+{
+	return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
+	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static char *palmtx_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = palmtx_is_ac_online,
+	.is_usb_online   = palmtx_is_usb_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = palmtx_supplicants,
+	.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtx_lcd_modes[] = {
+{
+	.pixclock	= 57692,
+	.xres		= 320,
+	.yres		= 480,
+	.bpp		= 16,
+
+	.left_margin	= 32,
+	.right_margin	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 1,
+
+	.hsync_len	= 4,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmtx_lcd_screen = {
+	.modes		= palmtx_lcd_modes,
+	.num_modes	= ARRAY_SIZE(palmtx_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&palmtx_pxa_keys,
+#endif
+	&palmtx_backlight,
+	&power_supply,
+};
+
+static struct map_desc palmtx_io_desc[] __initdata = {
+{
+	.virtual	= PALMTX_PCMCIA_VIRT,
+	.pfn		= __phys_to_pfn(PALMTX_PCMCIA_PHYS),
+	.length		= PALMTX_PCMCIA_SIZE,
+	.type		= MT_DEVICE
+},
+};
+
+static void __init palmtx_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
+}
+
+static void __init palmtx_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
+
+	set_pxa_fb_info(&palmtx_lcd_screen);
+	pxa_set_mci_info(&palmtx_mci_platform_data);
+	pxa_set_udc_info(&palmtx_udc_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmtx_ficp_platform_data);
+	pxa_set_keypad_info(&palmtx_keypad_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMTX, "Palm T|X")
+	.phys_io	= PALMTX_PHYS_IO_START,
+	.io_pg_offst	= io_p2v(0x40000000),
+	.boot_params	= 0xa0000100,
+	.map_io		= palmtx_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmtx_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 3b945eb0aee3..730b9f6ede1d 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -24,15 +24,17 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/max7301.h>
 #include <linux/leds.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx_spi.h>
-#include <asm/arch/pcm027.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/pcm027.h>
 #include "generic.h"
 
 /*
@@ -108,6 +110,32 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+/*
+ * SPI host and devices
+ */
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+	.num_chipselect	= 1,
+};
+
+static struct max7301_platform_data max7301_info = {
+	.base = -1,
+};
+
+/* bus_num must match id in pxa2xx_set_spi_info() call */
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias	= "max7301",
+		.platform_data	= &max7301_info,
+		.max_speed_hz	= 13000000,
+		.bus_num	= 1,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
+
+/*
+ * NOR flash
+ */
 static struct physmap_flash_data pcm027_flash_data = {
 	.width  = 4,
 };
@@ -190,6 +218,9 @@ static void __init pcm027_init(void)
 #ifdef CONFIG_MACH_PCM990_BASEBOARD
 	pcm990_baseboard_init();
 #endif
+
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
 static void __init pcm027_map_io(void)
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 5d87c7c866e4..420c9b3813f6 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -22,25 +22,40 @@
 
 #include <linux/irq.h>
 #include <linux/platform_device.h>
-#include <linux/ide.h>
 #include <linux/i2c.h>
 #include <linux/pwm_backlight.h>
 
 #include <media/soc_camera.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/camera.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
 #include <asm/mach/map.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pcm990_baseboard.h>
-#include <asm/arch/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pcm990_baseboard.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa27x.h>
 
 #include "devices.h"
+#include "generic.h"
+
+static unsigned long pcm990_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	/* USB */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+	/* PWM0 */
+	GPIO16_PWM0_OUT,
+};
 
 /*
  * pcm990_lcd_power - control power supply to the LCD
@@ -277,16 +292,6 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 {
 	int err;
 
-	/*
-	 * enable GPIO for PXA27x MMC controller
-	 */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
 	err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
 			     "MMC card detect", data);
 	if (err)
@@ -333,8 +338,6 @@ static struct pxamci_platform_data pcm990_mci_platform_data = {
  */
 static int pcm990_ohci_init(struct device *dev)
 {
-	pxa_gpio_mode(PCM990_USB_OVERCURRENT);
-	pxa_gpio_mode(PCM990_USB_PWR_EN);
 	/*
 	 * disable USB port 2 and 3
 	 * power sense is active low
@@ -361,23 +364,27 @@ static struct pxaohci_platform_data pcm990_ohci_platform_data = {
  * PXA27x Camera specific stuff
  */
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static unsigned long pcm990_camera_pin_config[] = {
+	/* CIF */
+	GPIO98_CIF_DD_0,
+	GPIO105_CIF_DD_1,
+	GPIO104_CIF_DD_2,
+	GPIO103_CIF_DD_3,
+	GPIO95_CIF_DD_4,
+	GPIO94_CIF_DD_5,
+	GPIO93_CIF_DD_6,
+	GPIO108_CIF_DD_7,
+	GPIO107_CIF_DD_8,
+	GPIO106_CIF_DD_9,
+	GPIO42_CIF_MCLK,
+	GPIO45_CIF_PCLK,
+	GPIO43_CIF_FV,
+	GPIO44_CIF_LV,
+};
+
 static int pcm990_pxacamera_init(struct device *dev)
 {
-	pxa_gpio_mode(GPIO98_CIF_DD_0_MD);
-	pxa_gpio_mode(GPIO105_CIF_DD_1_MD);
-	pxa_gpio_mode(GPIO104_CIF_DD_2_MD);
-	pxa_gpio_mode(GPIO103_CIF_DD_3_MD);
-	pxa_gpio_mode(GPIO95_CIF_DD_4_MD);
-	pxa_gpio_mode(GPIO94_CIF_DD_5_MD);
-	pxa_gpio_mode(GPIO93_CIF_DD_6_MD);
-	pxa_gpio_mode(GPIO108_CIF_DD_7_MD);
-	pxa_gpio_mode(GPIO107_CIF_DD_8_MD);
-	pxa_gpio_mode(GPIO106_CIF_DD_9_MD);
-	pxa_gpio_mode(GPIO42_CIF_MCLK_MD);
-	pxa_gpio_mode(GPIO45_CIF_PCLK_MD);
-	pxa_gpio_mode(GPIO43_CIF_FV_MD);
-	pxa_gpio_mode(GPIO44_CIF_LV_MD);
-
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
 	return 0;
 }
 
@@ -449,8 +456,10 @@ static struct map_desc pcm990_io_desc[] __initdata = {
  */
 void __init pcm990_baseboard_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
+
 	/* register CPLD access */
-	iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc));
+	iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
 
 	/* register CPLD's IRQ controller */
 	pcm990_init_irq();
@@ -458,7 +467,6 @@ void __init pcm990_baseboard_init(void)
 #ifndef CONFIG_PCM990_DISPLAY_NONE
 	set_pxa_fb_info(&pcm990_fbinfo);
 #endif
-	pxa_gpio_mode(GPIO16_PWM0_MD);
 	platform_device_register(&pcm990_backlight_device);
 
 	/* MMC */
@@ -473,9 +481,8 @@ void __init pcm990_baseboard_init(void)
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
 	pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
-	i2c_register_board_info(0, pcm990_i2c_devices,
-		ARRAY_SIZE(pcm990_i2c_devices));
+	i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
 #endif
 
-	printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n");
+	printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
 }
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 7d4debbdcca3..1b539e675579 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -16,12 +16,12 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/memory.h>
 #include <asm/system.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
 #include <asm/mach/time.h>
 
 struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index f81c10cafd48..055ec63d768c 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -21,7 +21,7 @@
 #include <linux/pm.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -31,16 +31,16 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/poodle.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/irda.h>
+#include <mach/poodle.h>
+#include <mach/pxafb.h>
+#include <mach/sharpsl.h>
+#include <mach/ssp.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/hardware/locomo.h>
@@ -267,6 +267,7 @@ static void poodle_irda_transceiver_mode(struct device *dev, int mode)
 	} else {
 		GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data poodle_ficp_platform_data = {
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
index ce28cd9fed16..316cd986da5c 100644
--- a/arch/arm/mach-pxa/pwm.c
+++ b/arch/arm/mach-pxa/pwm.c
@@ -20,7 +20,7 @@
 #include <linux/pwm.h>
 
 #include <asm/div64.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 /* PWM registers and bits definitions */
 #define PWMCR		(0x00)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 4cd50e3005e9..9e5d8a8c6424 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -23,13 +23,14 @@
 #include <linux/suspend.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -109,6 +110,52 @@ static const struct clkops clk_pxa25x_lcd_ops = {
 	.getrate	= clk_pxa25x_lcd_getrate,
 };
 
+static unsigned long gpio12_config_32k[] = {
+	GPIO12_32KHz,
+};
+
+static unsigned long gpio12_config_gpio[] = {
+	GPIO12_GPIO,
+};
+
+static void clk_gpio12_enable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio12_config_32k, 1);
+}
+
+static void clk_gpio12_disable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio12_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio12_ops = {
+	.enable         = clk_gpio12_enable,
+	.disable        = clk_gpio12_disable,
+};
+
+static unsigned long gpio11_config_3m6[] = {
+	GPIO11_3_6MHz,
+};
+
+static unsigned long gpio11_config_gpio[] = {
+	GPIO11_GPIO,
+};
+
+static void clk_gpio11_enable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio11_config_3m6, 1);
+}
+
+static void clk_gpio11_disable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio11_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio11_ops = {
+	.enable         = clk_gpio11_enable,
+	.disable        = clk_gpio11_disable,
+};
+
 /*
  * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
  * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
@@ -128,6 +175,8 @@ static struct clk pxa25x_clks[] = {
 	INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
 	INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
 	INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa25x_device_udc.dev),
+	INIT_CLK("GPIO11_CLK", &clk_pxa25x_gpio11_ops, 3686400, 0, NULL),
+	INIT_CLK("GPIO12_CLK", &clk_pxa25x_gpio12_ops, 32768, 0, NULL),
 	INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
 	INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
 
@@ -145,7 +194,10 @@ static struct clk pxa25x_clks[] = {
 	INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
 };
 
-static struct clk gpio7_clk = INIT_CKOTHER("GPIO7_CK", &pxa25x_clks[4], NULL);
+static struct clk pxa2xx_clk_aliases[] = {
+	INIT_CKOTHER("GPIO7_CLK", &pxa25x_clks[4], NULL),
+	INIT_CKOTHER("SA1111_CLK", &pxa25x_clks[5], NULL),
+};
 
 #ifdef CONFIG_PM
 
@@ -293,10 +345,13 @@ static int __init pxa25x_init(void)
 	int i, ret = 0;
 
 	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-	if (cpu_is_pxa25x())
+	if (cpu_is_pxa255())
 		clks_register(&pxa25x_hwuart_clk, 1);
 
 	if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
+
+		reset_status = RCSR;
+
 		clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks));
 
 		if ((ret = pxa_init_dma(16)))
@@ -317,10 +372,10 @@ static int __init pxa25x_init(void)
 	}
 
 	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-	if (cpu_is_pxa25x())
+	if (cpu_is_pxa255())
 		ret = platform_device_register(&pxa_device_hwuart);
 
-	clks_register(&gpio7_clk, 1);
+	clks_register(pxa2xx_clk_aliases, ARRAY_SIZE(pxa2xx_clk_aliases));
 
 	return ret;
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index d5d14ea33f27..f9f6a9c31f4b 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -18,16 +18,17 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/i2c.h>
+#include <mach/irqs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/reset.h>
+#include <mach/ohci.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -384,6 +385,9 @@ static int __init pxa27x_init(void)
 	int i, ret = 0;
 
 	if (cpu_is_pxa27x()) {
+
+		reset_status = RCSR;
+
 		clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks));
 
 		if ((ret = pxa_init_dma(32)))
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index d4f6415e8413..73d04d81c75a 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -14,9 +14,18 @@
 #include <linux/kernel.h>
 #include <linux/device.h>
 
-#include <asm/arch/mfp-pxa2xx.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/irda.h>
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa2xx.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/irda.h>
+
+void pxa2xx_clear_reset_status(unsigned int mask)
+{
+	/* RESET_STATUS_* has a 1:1 mapping with RCSR */
+	RCSR = mask;
+}
 
 static unsigned long pxa2xx_mfp_fir[] = {
 	GPIO46_FICP_RXD,
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 0a0d3877f212..494fc1f032db 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -15,9 +15,15 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp-pxa300.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa300.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
 
 static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
 
@@ -79,15 +85,26 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
+static struct clk common_clks[] = {
+	PXA3xx_CKEN("NANDCLK", NAND, 156000000, 0, &pxa3xx_device_nand.dev),
+};
+
+static struct clk pxa310_clks[] = {
+	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
+};
+
 static int __init pxa300_init(void)
 {
 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
 		pxa3xx_init_mfp();
 		pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
+		clks_register(ARRAY_AND_SIZE(common_clks));
 	}
 
-	if (cpu_is_pxa310())
+	if (cpu_is_pxa310()) {
 		pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
+		clks_register(ARRAY_AND_SIZE(pxa310_clks));
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 74128eb8f8d0..016eb18f01a3 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -15,10 +15,16 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa320.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa320.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
 
 static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 
@@ -74,16 +80,17 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
-static void __init pxa320_init_mfp(void)
-{
-	pxa3xx_init_mfp();
-	pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
-}
+static struct clk pxa320_clks[] = {
+	PXA3xx_CKEN("NANDCLK", NAND, 104000000, 0, &pxa3xx_device_nand.dev),
+};
 
 static int __init pxa320_init(void)
 {
-	if (cpu_is_pxa320())
-		pxa320_init_mfp();
+	if (cpu_is_pxa320()) {
+		pxa3xx_init_mfp();
+		pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
+		clks_register(ARRAY_AND_SIZE(pxa320_clks));
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 15685d2b8f8c..03cbc38103ed 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -22,12 +22,13 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/ssp.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/reset.h>
+#include <mach/ohci.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/ssp.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -109,6 +110,12 @@ unsigned int pxa3xx_get_memclk_frequency_10khz(void)
 	return (clk / 10000);
 }
 
+void pxa3xx_clear_reset_status(unsigned int mask)
+{
+	/* RESET_STATUS_* has a 1:1 mapping with ARSR */
+	ARSR = mask;
+}
+
 /*
  * Return the current AC97 clock frequency.
  */
@@ -144,7 +151,7 @@ static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
 	return hsio_clk;
 }
 
-static void clk_pxa3xx_cken_enable(struct clk *clk)
+void clk_pxa3xx_cken_enable(struct clk *clk)
 {
 	unsigned long mask = 1ul << (clk->cken & 0x1f);
 
@@ -154,7 +161,7 @@ static void clk_pxa3xx_cken_enable(struct clk *clk)
 		CKENB |= mask;
 }
 
-static void clk_pxa3xx_cken_disable(struct clk *clk)
+void clk_pxa3xx_cken_disable(struct clk *clk)
 {
 	unsigned long mask = 1ul << (clk->cken & 0x1f);
 
@@ -164,7 +171,7 @@ static void clk_pxa3xx_cken_disable(struct clk *clk)
 		CKENB &= ~mask;
 }
 
-static const struct clkops clk_pxa3xx_cken_ops = {
+const struct clkops clk_pxa3xx_cken_ops = {
 	.enable		= clk_pxa3xx_cken_enable,
 	.disable	= clk_pxa3xx_cken_disable,
 };
@@ -196,24 +203,6 @@ static const struct clkops clk_pout_ops = {
 	.disable	= clk_pout_disable,
 };
 
-#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)	\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
-		.ops	= &clk_pxa3xx_cken_ops,		\
-		.rate	= _rate,			\
-		.cken	= CKEN_##_cken,			\
-		.delay	= _delay,			\
-	}
-
-#define PXA3xx_CK(_name, _cken, _ops, _dev)		\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
-		.ops	= _ops,				\
-		.cken	= CKEN_##_cken,			\
-	}
-
 static struct clk pxa3xx_clks[] = {
 	{
 		.name           = "CLK_POUT",
@@ -244,7 +233,6 @@ static struct clk pxa3xx_clks[] = {
 
 	PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
 	PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
-	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
 };
 
 #ifdef CONFIG_PM
@@ -551,6 +539,9 @@ static int __init pxa3xx_init(void)
 	int i, ret = 0;
 
 	if (cpu_is_pxa3xx()) {
+
+		reset_status = ARSR;
+
 		/*
 		 * clear RDH bit every time after reset
 		 *
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
new file mode 100644
index 000000000000..13e6bfdfff60
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -0,0 +1,190 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa930.c
+ *
+ * Code specific to PXA930
+ *
+ * Copyright (C) 2007-2008 Marvell Internation Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/hardware.h>
+#include <mach/mfp-pxa930.h>
+
+static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
+
+	MFP_ADDR(GPIO0, 0x02e0),
+	MFP_ADDR(GPIO1, 0x02dc),
+	MFP_ADDR(GPIO2, 0x02e8),
+	MFP_ADDR(GPIO3, 0x02d8),
+	MFP_ADDR(GPIO4, 0x02e4),
+	MFP_ADDR(GPIO5, 0x02ec),
+	MFP_ADDR(GPIO6, 0x02f8),
+	MFP_ADDR(GPIO7, 0x02fc),
+	MFP_ADDR(GPIO8, 0x0300),
+	MFP_ADDR(GPIO9, 0x02d4),
+	MFP_ADDR(GPIO10, 0x02f4),
+	MFP_ADDR(GPIO11, 0x02f0),
+	MFP_ADDR(GPIO12, 0x0304),
+	MFP_ADDR(GPIO13, 0x0310),
+	MFP_ADDR(GPIO14, 0x0308),
+	MFP_ADDR(GPIO15, 0x030c),
+	MFP_ADDR(GPIO16, 0x04e8),
+	MFP_ADDR(GPIO17, 0x04f4),
+	MFP_ADDR(GPIO18, 0x04f8),
+	MFP_ADDR(GPIO19, 0x04fc),
+	MFP_ADDR(GPIO20, 0x0518),
+	MFP_ADDR(GPIO21, 0x051c),
+	MFP_ADDR(GPIO22, 0x04ec),
+	MFP_ADDR(GPIO23, 0x0500),
+	MFP_ADDR(GPIO24, 0x04f0),
+	MFP_ADDR(GPIO25, 0x0504),
+	MFP_ADDR(GPIO26, 0x0510),
+	MFP_ADDR(GPIO27, 0x0514),
+	MFP_ADDR(GPIO28, 0x0520),
+	MFP_ADDR(GPIO29, 0x0600),
+	MFP_ADDR(GPIO30, 0x0618),
+	MFP_ADDR(GPIO31, 0x0610),
+	MFP_ADDR(GPIO32, 0x060c),
+	MFP_ADDR(GPIO33, 0x061c),
+	MFP_ADDR(GPIO34, 0x0620),
+	MFP_ADDR(GPIO35, 0x0628),
+	MFP_ADDR(GPIO36, 0x062c),
+	MFP_ADDR(GPIO37, 0x0630),
+	MFP_ADDR(GPIO38, 0x0634),
+	MFP_ADDR(GPIO39, 0x0638),
+	MFP_ADDR(GPIO40, 0x063c),
+	MFP_ADDR(GPIO41, 0x0614),
+	MFP_ADDR(GPIO42, 0x0624),
+	MFP_ADDR(GPIO43, 0x0608),
+	MFP_ADDR(GPIO44, 0x0604),
+	MFP_ADDR(GPIO45, 0x050c),
+	MFP_ADDR(GPIO46, 0x0508),
+	MFP_ADDR(GPIO47, 0x02bc),
+	MFP_ADDR(GPIO48, 0x02b4),
+	MFP_ADDR(GPIO49, 0x02b8),
+	MFP_ADDR(GPIO50, 0x02c8),
+	MFP_ADDR(GPIO51, 0x02c0),
+	MFP_ADDR(GPIO52, 0x02c4),
+	MFP_ADDR(GPIO53, 0x02d0),
+	MFP_ADDR(GPIO54, 0x02cc),
+	MFP_ADDR(GPIO55, 0x029c),
+	MFP_ADDR(GPIO56, 0x02a0),
+	MFP_ADDR(GPIO57, 0x0294),
+	MFP_ADDR(GPIO58, 0x0298),
+	MFP_ADDR(GPIO59, 0x02a4),
+	MFP_ADDR(GPIO60, 0x02a8),
+	MFP_ADDR(GPIO61, 0x02b0),
+	MFP_ADDR(GPIO62, 0x02ac),
+	MFP_ADDR(GPIO63, 0x0640),
+	MFP_ADDR(GPIO64, 0x065c),
+	MFP_ADDR(GPIO65, 0x0648),
+	MFP_ADDR(GPIO66, 0x0644),
+	MFP_ADDR(GPIO67, 0x0674),
+	MFP_ADDR(GPIO68, 0x0658),
+	MFP_ADDR(GPIO69, 0x0654),
+	MFP_ADDR(GPIO70, 0x0660),
+	MFP_ADDR(GPIO71, 0x0668),
+	MFP_ADDR(GPIO72, 0x0664),
+	MFP_ADDR(GPIO73, 0x0650),
+	MFP_ADDR(GPIO74, 0x066c),
+	MFP_ADDR(GPIO75, 0x064c),
+	MFP_ADDR(GPIO76, 0x0670),
+	MFP_ADDR(GPIO77, 0x0678),
+	MFP_ADDR(GPIO78, 0x067c),
+	MFP_ADDR(GPIO79, 0x0694),
+	MFP_ADDR(GPIO80, 0x069c),
+	MFP_ADDR(GPIO81, 0x06a0),
+	MFP_ADDR(GPIO82, 0x06a4),
+	MFP_ADDR(GPIO83, 0x0698),
+	MFP_ADDR(GPIO84, 0x06bc),
+	MFP_ADDR(GPIO85, 0x06b4),
+	MFP_ADDR(GPIO86, 0x06b0),
+	MFP_ADDR(GPIO87, 0x06c0),
+	MFP_ADDR(GPIO88, 0x06c4),
+	MFP_ADDR(GPIO89, 0x06ac),
+	MFP_ADDR(GPIO90, 0x0680),
+	MFP_ADDR(GPIO91, 0x0684),
+	MFP_ADDR(GPIO92, 0x0688),
+	MFP_ADDR(GPIO93, 0x0690),
+	MFP_ADDR(GPIO94, 0x068c),
+	MFP_ADDR(GPIO95, 0x06a8),
+	MFP_ADDR(GPIO96, 0x06b8),
+	MFP_ADDR(GPIO97, 0x0410),
+	MFP_ADDR(GPIO98, 0x0418),
+	MFP_ADDR(GPIO99, 0x041c),
+	MFP_ADDR(GPIO100, 0x0414),
+	MFP_ADDR(GPIO101, 0x0408),
+	MFP_ADDR(GPIO102, 0x0324),
+	MFP_ADDR(GPIO103, 0x040c),
+	MFP_ADDR(GPIO104, 0x0400),
+	MFP_ADDR(GPIO105, 0x0328),
+	MFP_ADDR(GPIO106, 0x0404),
+
+	MFP_ADDR(nXCVREN, 0x0204),
+	MFP_ADDR(DF_CLE_nOE, 0x020c),
+	MFP_ADDR(DF_nADV1_ALE, 0x0218),
+	MFP_ADDR(DF_SCLK_E, 0x0214),
+	MFP_ADDR(DF_SCLK_S, 0x0210),
+	MFP_ADDR(nBE0, 0x021c),
+	MFP_ADDR(nBE1, 0x0220),
+	MFP_ADDR(DF_nADV2_ALE, 0x0224),
+	MFP_ADDR(DF_INT_RnB, 0x0228),
+	MFP_ADDR(DF_nCS0, 0x022c),
+	MFP_ADDR(DF_nCS1, 0x0230),
+	MFP_ADDR(nLUA, 0x0254),
+	MFP_ADDR(nLLA, 0x0258),
+	MFP_ADDR(DF_nWE, 0x0234),
+	MFP_ADDR(DF_nRE_nOE, 0x0238),
+	MFP_ADDR(DF_ADDR0, 0x024c),
+	MFP_ADDR(DF_ADDR1, 0x0250),
+	MFP_ADDR(DF_ADDR2, 0x025c),
+	MFP_ADDR(DF_ADDR3, 0x0260),
+	MFP_ADDR(DF_IO0, 0x023c),
+	MFP_ADDR(DF_IO1, 0x0240),
+	MFP_ADDR(DF_IO2, 0x0244),
+	MFP_ADDR(DF_IO3, 0x0248),
+	MFP_ADDR(DF_IO4, 0x0264),
+	MFP_ADDR(DF_IO5, 0x0268),
+	MFP_ADDR(DF_IO6, 0x026c),
+	MFP_ADDR(DF_IO7, 0x0270),
+	MFP_ADDR(DF_IO8, 0x0274),
+	MFP_ADDR(DF_IO9, 0x0278),
+	MFP_ADDR(DF_IO10, 0x027c),
+	MFP_ADDR(DF_IO11, 0x0280),
+	MFP_ADDR(DF_IO12, 0x0284),
+	MFP_ADDR(DF_IO13, 0x0288),
+	MFP_ADDR(DF_IO14, 0x028c),
+	MFP_ADDR(DF_IO15, 0x0290),
+
+	MFP_ADDR(GSIM_UIO, 0x0314),
+	MFP_ADDR(GSIM_UCLK, 0x0318),
+	MFP_ADDR(GSIM_UDET, 0x031c),
+	MFP_ADDR(GSIM_nURST, 0x0320),
+
+	MFP_ADDR(PMIC_INT, 0x06c8),
+
+	MFP_ADDR(RDY, 0x0200),
+
+	MFP_ADDR_END,
+};
+
+static int __init pxa930_init(void)
+{
+	if (cpu_is_pxa930()) {
+		pxa3xx_init_mfp();
+		pxa3xx_mfp_init_addr(pxa930_mfp_addr_map);
+	}
+
+	return 0;
+}
+
+core_initcall(pxa930_init);
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
new file mode 100644
index 000000000000..9996c612c3d6
--- /dev/null
+++ b/arch/arm/mach-pxa/reset.c
@@ -0,0 +1,98 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <asm/io.h>
+#include <asm/proc-fns.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/reset.h>
+
+unsigned int reset_status;
+EXPORT_SYMBOL(reset_status);
+
+static void do_hw_reset(void);
+
+static int reset_gpio = -1;
+
+int init_gpio_reset(int gpio)
+{
+	int rc;
+
+	rc = gpio_request(gpio, "reset generator");
+	if (rc) {
+		printk(KERN_ERR "Can't request reset_gpio\n");
+		goto out;
+	}
+
+	rc = gpio_direction_input(gpio);
+	if (rc) {
+		printk(KERN_ERR "Can't configure reset_gpio for input\n");
+		gpio_free(gpio);
+		goto out;
+	}
+
+out:
+	if (!rc)
+		reset_gpio = gpio;
+
+	return rc;
+}
+
+/*
+ * Trigger GPIO reset.
+ * This covers various types of logic connecting gpio pin
+ * to RESET pins (nRESET or GPIO_RESET):
+ */
+static void do_gpio_reset(void)
+{
+	BUG_ON(reset_gpio == -1);
+
+	/* drive it low */
+	gpio_direction_output(reset_gpio, 0);
+	mdelay(2);
+	/* rising edge or drive high */
+	gpio_set_value(reset_gpio, 1);
+	mdelay(2);
+	/* falling edge */
+	gpio_set_value(reset_gpio, 0);
+
+	/* give it some time */
+	mdelay(10);
+
+	WARN_ON(1);
+	/* fallback */
+	do_hw_reset();
+}
+
+static void do_hw_reset(void)
+{
+	/* Initialize the watchdog and let it fire */
+	OWER = OWER_WME;
+	OSSR = OSSR_M3;
+	OSMR3 = OSCR + 368640;	/* ... in 100 ms */
+}
+
+void arch_reset(char mode)
+{
+	clear_reset_status(RESET_STATUS_ALL);
+
+	switch (mode) {
+	case 's':
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+		break;
+	case 'h':
+		do_hw_reset();
+		break;
+	case 'g':
+		do_gpio_reset();
+		break;
+	}
+}
+
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
new file mode 100644
index 000000000000..e7ea91ce7f02
--- /dev/null
+++ b/arch/arm/mach-pxa/saar.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/saar.c
+ *
+ *  Support for the Marvell PXA930 Handheld Platform (aka SAAR)
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* SAAR MFP configurations */
+static mfp_cfg_t saar_mfp_cfg[] __initdata = {
+	/* Ethernet */
+	DF_nCS1_nCS3,
+	GPIO97_GPIO,
+};
+
+#define SAAR_ETH_PHYS	(0x14000000)
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= (SAAR_ETH_PHYS + 0x300),
+		.end	= (SAAR_ETH_PHYS + 0xfffff),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+		.end	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct smc91x_platdata saar_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &saar_smc91x_info,
+	},
+};
+
+static void __init saar_init(void)
+{
+	/* initialize MFP configurations */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
+
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
+	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
+	.phys_io        = 0x40000000,
+	.boot_params    = 0xa0000100,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa3xx_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = saar_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 34cd585075b0..e804ae09370c 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -22,12 +22,12 @@
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
 #include "sharpsl.h"
 
 struct battery_thresh spitz_battery_levels_acin[] = {
@@ -146,18 +146,18 @@ void sharpsl_pm_pxa_init(void)
 	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE);
+	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH);
 
 	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING);
+	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING);
 
 	if (sharpsl_pm.machinfo->gpio_fatal) {
 		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING);
+		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING);
 	}
 
 	if (sharpsl_pm.machinfo->batfull_irq)
@@ -166,7 +166,7 @@ void sharpsl_pm_pxa_init(void)
 		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING);
+		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING);
 	}
 }
 
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 784716eb7fc5..a62c8375eb53 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -13,10 +13,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #define MDREFR_KDIV	0x200a4000	// all banks
 #define CCCR_SLEEP	0x00000107	// L=7 2N=2 A=0 PPDIS=0 CPDIS=0
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index e7d0fcd9b43f..cd39005c98ff 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -26,7 +26,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/system.h>
@@ -35,17 +35,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/spitz.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/reset.h>
+#include <mach/irda.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/akita.h>
+#include <mach/spitz.h>
+#include <mach/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
@@ -450,6 +452,7 @@ static void spitz_irda_transceiver_mode(struct device *dev, int mode)
 		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
 	else
 		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 #ifdef CONFIG_MACH_AKITA
@@ -459,6 +462,7 @@ static void akita_irda_transceiver_mode(struct device *dev, int mode)
 		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
 	else
 		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 #endif
 
@@ -529,11 +533,7 @@ static struct platform_device *devices[] __initdata = {
 
 static void spitz_poweroff(void)
 {
-	pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT);
-	GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET);
-
-	mdelay(1000);
-	arm_machine_restart('h');
+	arm_machine_restart('g');
 }
 
 static void spitz_restart(char mode)
@@ -547,6 +547,7 @@ static void spitz_restart(char mode)
 
 static void __init common_init(void)
 {
+	init_gpio_reset(SPITZ_GPIO_ON_RESET);
 	pm_power_off = spitz_poweroff;
 	arm_pm_restart = spitz_restart;
 
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 360354084ae4..8a40505dfd28 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -20,14 +20,14 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
 
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/spitz.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 0bb31982fb6f..9bd93c5f28b2 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -14,13 +14,6 @@
  *  IO-based SSP applications and allows easy port setup for DMA access.
  *
  *  Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
- *
- *  Revision history:
- *   22nd Aug 2003 Initial version.
- *   20th Dec 2004 Added ssp_config for changing port config without
- *                 closing the port.
- *    4th Aug 2005 Added option to disable irq handler registration and
- *                 cleaned up irq and clock detection.
  */
 
 #include <linux/module.h>
@@ -38,10 +31,10 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/regs-ssp.h>
+#include <mach/hardware.h>
+#include <mach/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/regs-ssp.h>
 
 #define TIMEOUT 100000
 
@@ -285,7 +278,7 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
 			goto out_region;
 		dev->irq = ssp->irq;
 	} else
-		dev->irq = 0;
+		dev->irq = NO_IRQ;
 
 	/* turn on SSP port clock */
 	clk_enable(ssp->clk);
@@ -306,7 +299,8 @@ void ssp_exit(struct ssp_dev *dev)
 	struct ssp_device *ssp = dev->ssp;
 
 	ssp_disable(dev);
-	free_irq(dev->irq, dev);
+	if (dev->irq != NO_IRQ)
+		free_irq(dev->irq, dev);
 	clk_disable(ssp->clk);
 	ssp_free(ssp);
 }
@@ -360,6 +354,7 @@ static int __devinit ssp_probe(struct platform_device *pdev, int type)
 		dev_err(&pdev->dev, "failed to allocate memory");
 		return -ENOMEM;
 	}
+	ssp->pdev = pdev;
 
 	ssp->clk = clk_get(&pdev->dev, "SSPCLK");
 	if (IS_ERR(ssp->clk)) {
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index 40bb70eff3fe..f3821cfda72f 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -11,10 +11,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 		.text
 
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
new file mode 100644
index 000000000000..589d32b4fc46
--- /dev/null
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/tavorevb.c
+ *
+ *  Support for the Marvell PXA930 Evaluation Board
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Tavor EVB MFP configurations */
+static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
+	/* Ethernet */
+	DF_nCS1_nCS3,
+	GPIO47_GPIO,
+};
+
+#define TAVOREVB_ETH_PHYS	(0x14000000)
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= (TAVOREVB_ETH_PHYS + 0x300),
+		.end	= (TAVOREVB_ETH_PHYS + 0xfffff),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+		.end	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct smc91x_platdata tavorevb_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &tavorevb_smc91x_info,
+	},
+};
+
+static void __init tavorevb_init(void)
+{
+	/* initialize MFP configurations */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
+
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
+	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
+	.phys_io        = 0x40000000,
+	.boot_params    = 0xa0000100,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa3xx_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = tavorevb_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 7b7c0179795b..67e18509d7bf 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -22,7 +22,7 @@
 #include <asm/cnt32_to_63.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 /*
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
new file mode 100644
index 000000000000..fb0294bd4310
--- /dev/null
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -0,0 +1,150 @@
+/*
+ * Bluetooth built-in chip control
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/rfkill.h>
+
+#include <mach/tosa_bt.h>
+
+static void tosa_bt_on(struct tosa_bt_data *data)
+{
+	gpio_set_value(data->gpio_reset, 0);
+	gpio_set_value(data->gpio_pwr, 1);
+	gpio_set_value(data->gpio_reset, 1);
+	mdelay(20);
+	gpio_set_value(data->gpio_reset, 0);
+}
+
+static void tosa_bt_off(struct tosa_bt_data *data)
+{
+	gpio_set_value(data->gpio_reset, 1);
+	mdelay(10);
+	gpio_set_value(data->gpio_pwr, 0);
+	gpio_set_value(data->gpio_reset, 0);
+}
+
+static int tosa_bt_toggle_radio(void *data, enum rfkill_state state)
+{
+	pr_info("BT_RADIO going: %s\n",
+			state == RFKILL_STATE_ON ? "on" : "off");
+
+	if (state == RFKILL_STATE_ON) {
+		pr_info("TOSA_BT: going ON\n");
+		tosa_bt_on(data);
+	} else {
+		pr_info("TOSA_BT: going OFF\n");
+		tosa_bt_off(data);
+	}
+	return 0;
+}
+
+static int tosa_bt_probe(struct platform_device *dev)
+{
+	int rc;
+	struct rfkill *rfk;
+
+	struct tosa_bt_data *data = dev->dev.platform_data;
+
+	rc = gpio_request(data->gpio_reset, "Bluetooth reset");
+	if (rc)
+		goto err_reset;
+	rc = gpio_direction_output(data->gpio_reset, 0);
+	if (rc)
+		goto err_reset_dir;
+	rc = gpio_request(data->gpio_pwr, "Bluetooth power");
+	if (rc)
+		goto err_pwr;
+	rc = gpio_direction_output(data->gpio_pwr, 0);
+	if (rc)
+		goto err_pwr_dir;
+
+	rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH);
+	if (!rfk) {
+		rc = -ENOMEM;
+		goto err_rfk_alloc;
+	}
+
+	rfk->name = "tosa-bt";
+	rfk->toggle_radio = tosa_bt_toggle_radio;
+	rfk->data = data;
+#ifdef CONFIG_RFKILL_LEDS
+	rfk->led_trigger.name = "tosa-bt";
+#endif
+
+	rc = rfkill_register(rfk);
+	if (rc)
+		goto err_rfkill;
+
+	platform_set_drvdata(dev, rfk);
+
+	return 0;
+
+err_rfkill:
+	if (rfk)
+		rfkill_free(rfk);
+	rfk = NULL;
+err_rfk_alloc:
+	tosa_bt_off(data);
+err_pwr_dir:
+	gpio_free(data->gpio_pwr);
+err_pwr:
+err_reset_dir:
+	gpio_free(data->gpio_reset);
+err_reset:
+	return rc;
+}
+
+static int __devexit tosa_bt_remove(struct platform_device *dev)
+{
+	struct tosa_bt_data *data = dev->dev.platform_data;
+	struct rfkill *rfk = platform_get_drvdata(dev);
+
+	platform_set_drvdata(dev, NULL);
+
+	if (rfk)
+		rfkill_unregister(rfk);
+	rfk = NULL;
+
+	tosa_bt_off(data);
+
+	gpio_free(data->gpio_pwr);
+	gpio_free(data->gpio_reset);
+
+	return 0;
+}
+
+static struct platform_driver tosa_bt_driver = {
+	.probe = tosa_bt_probe,
+	.remove = __devexit_p(tosa_bt_remove),
+
+	.driver = {
+		.name = "tosa-bt",
+		.owner = THIS_MODULE,
+	},
+};
+
+
+static int __init tosa_bt_init(void)
+{
+	return platform_driver_register(&tosa_bt_driver);
+}
+
+static void __exit tosa_bt_exit(void)
+{
+	platform_driver_unregister(&tosa_bt_driver);
+}
+
+module_init(tosa_bt_init);
+module_exit(tosa_bt_exit);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index ab4a9f579913..5dab30eafddc 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -18,31 +18,33 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
 #include <linux/mmc/host.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 #include <linux/pm.h>
-#include <linux/delay.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/pda_power.h>
+#include <linux/rfkill.h>
 
 #include <asm/setup.h>
-#include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/irda.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/tosa_bt.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/arch/tosa.h>
+#include <mach/tosa.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
@@ -86,7 +88,7 @@ static unsigned long tosa_pin_config[] = {
 	GPIO6_MMC_CLK,
 	GPIO8_MMC_CS0,
 	GPIO9_GPIO, /* Detect */
-	// GPIO10 nSD_INT
+	GPIO10_GPIO, /* nSD_INT */
 
 	/* CF */
 	GPIO13_GPIO, /* CD_IRQ */
@@ -124,34 +126,34 @@ static unsigned long tosa_pin_config[] = {
 	GPIO44_BTUART_CTS,
 	GPIO45_BTUART_RTS,
 
-	/* IrDA */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
 	/* Keybd */
-	GPIO58_GPIO,
-	GPIO59_GPIO,
-	GPIO60_GPIO,
-	GPIO61_GPIO,
-	GPIO62_GPIO,
-	GPIO63_GPIO,
-	GPIO64_GPIO,
-	GPIO65_GPIO,
-	GPIO66_GPIO,
-	GPIO67_GPIO,
-	GPIO68_GPIO,
-	GPIO69_GPIO,
-	GPIO70_GPIO,
-	GPIO71_GPIO,
-	GPIO72_GPIO,
-	GPIO73_GPIO,
-	GPIO74_GPIO,
-	GPIO75_GPIO,
+	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
 
 	/* SPI */
 	GPIO81_SSP2_CLK_OUT,
 	GPIO82_SSP2_FRM_OUT,
 	GPIO83_SSP2_TXD,
+
+	/* IrDA is managed in other way */
+	GPIO46_GPIO,
+	GPIO47_GPIO,
 };
 
 /*
@@ -249,6 +251,15 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 
 	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
+	err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
+	if (err) {
+		printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
+		goto err_gpio_detect;
+	}
+	err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
+	if (err)
+		goto err_gpio_detect_dir;
+
 	err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				"MMC/SD card detect", data);
@@ -257,7 +268,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 		goto err_irq;
 	}
 
-	err = gpio_request(TOSA_GPIO_SD_WP, "sd_wp");
+	err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
 	if (err) {
 		printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
 		goto err_gpio_wp;
@@ -266,7 +277,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 	if (err)
 		goto err_gpio_wp_dir;
 
-	err = gpio_request(TOSA_GPIO_PWR_ON, "sd_pwr");
+	err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
 	if (err) {
 		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
 		goto err_gpio_pwr;
@@ -275,8 +286,20 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 	if (err)
 		goto err_gpio_pwr_dir;
 
+	err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
+	if (err) {
+		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
+		goto err_gpio_int;
+	}
+	err = gpio_direction_input(TOSA_GPIO_nSD_INT);
+	if (err)
+		goto err_gpio_int_dir;
+
 	return 0;
 
+err_gpio_int_dir:
+	gpio_free(TOSA_GPIO_nSD_INT);
+err_gpio_int:
 err_gpio_pwr_dir:
 	gpio_free(TOSA_GPIO_PWR_ON);
 err_gpio_pwr:
@@ -285,6 +308,9 @@ err_gpio_wp_dir:
 err_gpio_wp:
 	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
 err_irq:
+err_gpio_detect_dir:
+	gpio_free(TOSA_GPIO_nSD_DETECT);
+err_gpio_detect:
 	return err;
 }
 
@@ -306,9 +332,11 @@ static int tosa_mci_get_ro(struct device *dev)
 
 static void tosa_mci_exit(struct device *dev, void *data)
 {
+	gpio_free(TOSA_GPIO_nSD_INT);
 	gpio_free(TOSA_GPIO_PWR_ON);
 	gpio_free(TOSA_GPIO_SD_WP);
 	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
+	gpio_free(TOSA_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data tosa_mci_platform_data = {
@@ -322,29 +350,55 @@ static struct pxamci_platform_data tosa_mci_platform_data = {
 /*
  * Irda
  */
+static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF) {
+		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
+		pxa2xx_transceiver_mode(dev, mode);
+		gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+	} else {
+		pxa2xx_transceiver_mode(dev, mode);
+		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
+	}
+}
+
 static int tosa_irda_startup(struct device *dev)
 {
 	int ret;
 
+	ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
+	if (ret)
+		goto err_tx;
+	ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+	if (ret)
+		goto err_tx_dir;
+
 	ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
 	if (ret)
-		return ret;
+		goto err_pwr;
 
 	ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
 	if (ret)
-		gpio_free(TOSA_GPIO_IR_POWERDWN);
+		goto err_pwr_dir;
 
-	return ret;
-	}
+	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
 
-static void tosa_irda_shutdown(struct device *dev)
-{
+	return 0;
+
+err_pwr_dir:
 	gpio_free(TOSA_GPIO_IR_POWERDWN);
+err_pwr:
+err_tx_dir:
+	gpio_free(TOSA_GPIO_IRDA_TX);
+err_tx:
+	return ret;
 }
 
-static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+static void tosa_irda_shutdown(struct device *dev)
 {
-	gpio_set_value(TOSA_GPIO_IR_POWERDWN, !(mode & IR_OFF));
+	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
+	gpio_free(TOSA_GPIO_IR_POWERDWN);
+	gpio_free(TOSA_GPIO_IRDA_TX);
 }
 
 static struct pxaficp_platform_data tosa_ficp_platform_data = {
@@ -355,6 +409,70 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = {
 };
 
 /*
+ * Tosa AC IN
+ */
+static int tosa_power_init(struct device *dev)
+{
+	int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
+	if (ret)
+		goto err_gpio_req;
+
+	ret = gpio_direction_input(TOSA_GPIO_AC_IN);
+	if (ret)
+		goto err_gpio_in;
+
+	return 0;
+
+err_gpio_in:
+	gpio_free(TOSA_GPIO_AC_IN);
+err_gpio_req:
+	return ret;
+}
+
+static void tosa_power_exit(struct device *dev)
+{
+	gpio_free(TOSA_GPIO_AC_IN);
+}
+
+static int tosa_power_ac_online(void)
+{
+	return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
+}
+
+static char *tosa_ac_supplied_to[] = {
+	"main-battery",
+	"backup-battery",
+	"jacket-battery",
+};
+
+static struct pda_power_pdata tosa_power_data = {
+	.init			= tosa_power_init,
+	.is_ac_online		= tosa_power_ac_online,
+	.exit			= tosa_power_exit,
+	.supplied_to		= tosa_ac_supplied_to,
+	.num_supplicants	= ARRAY_SIZE(tosa_ac_supplied_to),
+};
+
+static struct resource tosa_power_resource[] = {
+	{
+		.name		= "ac",
+		.start		= gpio_to_irq(TOSA_GPIO_AC_IN),
+		.end		= gpio_to_irq(TOSA_GPIO_AC_IN),
+		.flags		= IORESOURCE_IRQ |
+				  IORESOURCE_IRQ_HIGHEDGE |
+				  IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct platform_device tosa_power_device = {
+	.name			= "pda-power",
+	.id			= -1,
+	.dev.platform_data	= &tosa_power_data,
+	.resource		= tosa_power_resource,
+	.num_resources		= ARRAY_SIZE(tosa_power_resource),
+};
+
+/*
  * Tosa Keyboard
  */
 static struct platform_device tosakbd_device = {
@@ -439,7 +557,7 @@ static struct gpio_led tosa_gpio_leds[] = {
 	},
 	{
 		.name			= "tosa:blue:bluetooth",
-		.default_trigger	= "none",
+		.default_trigger	= "tosa-bt",
 		.gpio			= TOSA_GPIO_BT_LED,
 	},
 };
@@ -457,21 +575,184 @@ static struct platform_device tosaled_device = {
 	},
 };
 
+/*
+ * Toshiba Mobile IO Controller
+ */
+static struct resource tc6393xb_resources[] = {
+	[0] = {
+		.start	= TOSA_LCDC_PHYS,
+		.end	= TOSA_LCDC_PHYS + 0x3ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+
+	[1] = {
+		.start	= TOSA_IRQ_GPIO_TC6393XB_INT,
+		.end	= TOSA_IRQ_GPIO_TC6393XB_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+static int tosa_tc6393xb_enable(struct platform_device *dev)
+{
+	int rc;
+
+	rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
+	if (rc)
+		goto err_req_pclr;
+	rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
+	if (rc)
+		goto err_req_suspend;
+	rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v");
+	if (rc)
+		goto err_req_l3v;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+	if (rc)
+		goto err_dir_l3v;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+	if (rc)
+		goto err_dir_suspend;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
+	if (rc)
+		goto err_dir_pclr;
+
+	mdelay(1);
+
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+
+	mdelay(10);
+
+	gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+
+	return 0;
+err_dir_pclr:
+err_dir_suspend:
+err_dir_l3v:
+	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+err_req_l3v:
+	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+err_req_suspend:
+	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+err_req_pclr:
+	return rc;
+}
+
+static int tosa_tc6393xb_disable(struct platform_device *dev)
+{
+	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+
+	return 0;
+}
+
+static int tosa_tc6393xb_resume(struct platform_device *dev)
+{
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+	mdelay(10);
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+	mdelay(10);
+
+	return 0;
+}
+
+static int tosa_tc6393xb_suspend(struct platform_device *dev)
+{
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+	return 0;
+}
+
+static struct mtd_partition tosa_nand_partition[] = {
+	{
+		.name	= "smf",
+		.offset	= 0,
+		.size	= 7 * 1024 * 1024,
+	},
+	{
+		.name	= "root",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 28 * 1024 * 1024,
+	},
+	{
+		.name	= "home",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
+	.options	= 0,
+	.offs		= 4,
+	.len		= 2,
+	.pattern	= scan_ff_pattern
+};
+
+static struct tmio_nand_data tosa_tc6393xb_nand_config = {
+	.num_partitions	= ARRAY_SIZE(tosa_nand_partition),
+	.partition	= tosa_nand_partition,
+	.badblock_pattern = &tosa_tc6393xb_nand_bbt,
+};
+
+static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
+	.scr_pll2cr	= 0x0cc1,
+	.scr_gper	= 0x3300,
+	.scr_gpo_dsr	=
+		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+	.scr_gpo_doecr	=
+		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+
+	.irq_base	= IRQ_BOARD_START,
+	.gpio_base	= TOSA_TC6393XB_GPIO_BASE,
+
+	.enable		= tosa_tc6393xb_enable,
+	.disable	= tosa_tc6393xb_disable,
+	.suspend	= tosa_tc6393xb_suspend,
+	.resume		= tosa_tc6393xb_resume,
+
+	.nand_data	= &tosa_tc6393xb_nand_config,
+};
+
+
+static struct platform_device tc6393xb_device = {
+	.name	= "tc6393xb",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &tosa_tc6393xb_setup,
+	},
+	.num_resources	= ARRAY_SIZE(tc6393xb_resources),
+	.resource	= tc6393xb_resources,
+};
+
+static struct tosa_bt_data tosa_bt_data = {
+	.gpio_pwr	= TOSA_GPIO_BT_PWR_EN,
+	.gpio_reset	= TOSA_GPIO_BT_RESET,
+};
+
+static struct platform_device tosa_bt_device = {
+	.name	= "tosa-bt",
+	.id	= -1,
+	.dev.platform_data = &tosa_bt_data,
+};
+
+
 static struct platform_device *devices[] __initdata = {
 	&tosascoop_device,
 	&tosascoop_jc_device,
+	&tc6393xb_device,
+	&tosa_power_device,
 	&tosakbd_device,
 	&tosa_gpio_keys_device,
 	&tosaled_device,
+	&tosa_bt_device,
 };
 
 static void tosa_poweroff(void)
 {
-	gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
-	gpio_set_value(TOSA_GPIO_ON_RESET, 1);
-
-	mdelay(1000);
-	arm_machine_restart('h');
+	arm_machine_restart('g');
 }
 
 static void tosa_restart(char mode)
@@ -485,10 +766,14 @@ static void tosa_restart(char mode)
 
 static void __init tosa_init(void)
 {
+	int dummy;
+
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
+	init_gpio_reset(TOSA_GPIO_ON_RESET);
+
 	pm_power_off = tosa_poweroff;
 	arm_pm_restart = tosa_restart;
 
@@ -497,6 +782,10 @@ static void __init tosa_init(void)
 	/* enable batt_fault */
 	PMCR = 0x01;
 
+	dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
+	dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
+	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
+
 	pxa_set_mci_info(&tosa_mci_platform_data);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 61e244023089..3ed757e6bcc8 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -31,7 +31,7 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,15 +40,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/trizeps4.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/trizeps4.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -122,7 +122,7 @@ static struct resource dm9000_resources[] = {
 	[2] = {
 		.start	= TRIZEPS4_ETH_IRQ,
 		.end	= TRIZEPS4_ETH_IRQ,
-		.flags	= (IORESOURCE_IRQ | IRQT_RISING),
+		.flags	= (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING),
 	},
 };
 
@@ -254,6 +254,7 @@ static void board_irda_mode(struct device *dev, int mode)
 		/* Fast mode */
 		trizeps_conxs_ircr |= ConXS_IRCR_MODE;
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 	if (mode & IR_OFF) {
 		trizeps_conxs_ircr |= ConXS_IRCR_SD;
 	} else {
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 66b446ca273d..0cb65b5772fe 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -19,16 +19,18 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/zylonite.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/hardware.h>
+#include <mach/audio.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/zylonite.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -37,6 +39,8 @@
 struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
 
 int gpio_eth_irq;
+int gpio_debug_led1;
+int gpio_debug_led2;
 
 int wm9713_irq;
 
@@ -56,13 +60,57 @@ static struct resource smc91x_resources[] = {
 	}
 };
 
+static struct smc91x_platdata zylonite_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &zylonite_smc91x_info,
+	},
+};
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led zylonite_debug_leds[] = {
+	[0] = {
+		.name			= "zylonite:yellow:1",
+		.default_trigger	= "heartbeat",
+	},
+	[1] = {
+		.name			= "zylonite:yellow:2",
+		.default_trigger	= "default-on",
+	},
 };
 
+static struct gpio_led_platform_data zylonite_debug_leds_info = {
+	.leds		= zylonite_debug_leds,
+	.num_leds	= ARRAY_SIZE(zylonite_debug_leds),
+};
+
+static struct platform_device zylonite_device_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &zylonite_debug_leds_info,
+	}
+};
+
+static void __init zylonite_init_leds(void)
+{
+	zylonite_debug_leds[0].gpio = gpio_debug_led1;
+	zylonite_debug_leds[1].gpio = gpio_debug_led2;
+
+	platform_device_register(&zylonite_device_leds);
+}
+#else
+static inline void zylonite_init_leds(void) {}
+#endif
+
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct platform_pwm_backlight_data zylonite_backlight_data = {
 	.pwm_id		= 3,
@@ -259,7 +307,7 @@ static void __init zylonite_init_mmc(void)
 static inline void zylonite_init_mmc(void) {}
 #endif
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int zylonite_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
@@ -324,6 +372,57 @@ static void __init zylonite_init_keypad(void)
 static inline void zylonite_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition zylonite_nand_partitions[] = {
+	[0] = {
+		.name        = "Bootloader",
+		.offset      = 0,
+		.size        = 0x060000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "Kernel",
+		.offset      = 0x060000,
+		.size        = 0x200000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Filesystem",
+		.offset      = 0x0260000,
+		.size        = 0x3000000,     /* 48M - rootfs */
+	},
+	[3] = {
+		.name        = "MassStorage",
+		.offset      = 0x3260000,
+		.size        = 0x3d40000,
+	},
+	[4] = {
+		.name        = "BBT",
+		.offset      = 0x6FA0000,
+		.size        = 0x80000,
+		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
+	},
+	/* NOTE: we reserve some blocks at the end of the NAND flash for
+	 * bad block management, and the max number of relocation blocks
+	 * differs on different platforms. Please take care with it when
+	 * defining the partition table.
+	 */
+};
+
+static struct pxa3xx_nand_platform_data zylonite_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= zylonite_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(zylonite_nand_partitions),
+};
+
+static void __init zylonite_init_nand(void)
+{
+	pxa3xx_set_nand_info(&zylonite_nand_info);
+}
+#else
+static inline void zylonite_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
 static void __init zylonite_init(void)
 {
 	/* board-processor specific initialization */
@@ -342,6 +441,8 @@ static void __init zylonite_init(void)
 	zylonite_init_lcd();
 	zylonite_init_mmc();
 	zylonite_init_keypad();
+	zylonite_init_nand();
+	zylonite_init_leds();
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 6f7ae972b8db..095f5c648236 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -16,10 +16,13 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/mfp-pxa300.h>
-#include <asm/arch/zylonite.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/i2c.h>
+#include <mach/zylonite.h>
 
 #include "generic.h"
 
@@ -109,6 +112,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO12_MMC2_DAT3,
 	GPIO13_MMC2_CLK,
 	GPIO14_MMC2_CMD,
+
+	/* Standard I2C */
+	GPIO21_I2C_SCL,
+	GPIO22_I2C_SDA,
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
@@ -192,6 +199,39 @@ static void __init zylonite_detect_lcd_panel(void)
 		pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
 }
 
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static struct pca953x_platform_data gpio_exp[] = {
+	[0] = {
+		.gpio_base	= 128,
+	},
+	[1] = {
+		.gpio_base	= 144,
+	},
+};
+
+struct i2c_board_info zylonite_i2c_board_info[] = {
+	{
+		.type		= "pca9539",
+		.addr		= 0x74,
+		.platform_data	= &gpio_exp[0],
+		.irq		= IRQ_GPIO(18),
+	}, {
+		.type		= "pca9539",
+		.addr		= 0x75,
+		.platform_data	= &gpio_exp[1],
+		.irq		= IRQ_GPIO(19),
+	},
+};
+
+static void __init zylonite_init_i2c(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(zylonite_i2c_board_info));
+}
+#else
+static inline void zylonite_init_i2c(void) {}
+#endif
+
 void __init zylonite_pxa300_init(void)
 {
 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
@@ -207,6 +247,8 @@ void __init zylonite_pxa300_init(void)
 
 		/* WM9713 IRQ */
 		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
+
+		zylonite_init_i2c();
 	}
 
 	if (cpu_is_pxa300()) {
@@ -222,4 +264,8 @@ void __init zylonite_pxa300_init(void)
 		zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
 		zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
 	}
+
+	/* GPIOs for Debug LEDs */
+	gpio_debug_led1 = EXT_GPIO(25);
+	gpio_debug_led2 = EXT_GPIO(26);
 }
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 2b4fc34919ac..9879d7da2df5 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -17,9 +17,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mfp-pxa320.h>
-#include <asm/arch/zylonite.h>
+#include <mach/gpio.h>
+#include <mach/mfp-pxa320.h>
+#include <mach/zylonite.h>
 
 #include "generic.h"
 
@@ -116,6 +116,10 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	GPIO27_MMC2_DAT3,
 	GPIO28_MMC2_CLK,
 	GPIO29_MMC2_CMD,
+
+	/* Debug LEDs */
+	GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
+	GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,
 };
 
 #define NUM_LCD_DETECT_PINS	7
@@ -189,6 +193,8 @@ void __init zylonite_pxa320_init(void)
 
 		/* GPIO pin assignment */
 		gpio_eth_irq	= mfp_to_gpio(MFP_PIN_GPIO9);
+		gpio_debug_led1	= mfp_to_gpio(MFP_PIN_GPIO1_2);
+		gpio_debug_led2	= mfp_to_gpio(MFP_PIN_GPIO4_2);
 
 		/* MMC card detect & write protect for controller 0 */
 		zylonite_mmc_slot[0].gpio_cd  = mfp_to_gpio(MFP_PIN_GPIO1);
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 131990d196f5..4f9c84ab781c 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -29,7 +29,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h
new file mode 100644
index 000000000000..8d699fd324d0
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-eb.h
@@ -0,0 +1,191 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-eb.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_EB_H
+#define __ASM_ARCH_BOARD_EB_H
+
+#include <mach/platform.h>
+
+/*
+ * RealView EB + ARM11MPCore peripheral addresses
+ */
+#define REALVIEW_EB_UART0_BASE		0x10009000	/* UART 0 */
+#define REALVIEW_EB_UART1_BASE		0x1000A000	/* UART 1 */
+#define REALVIEW_EB_UART2_BASE		0x1000B000	/* UART 2 */
+#define REALVIEW_EB_UART3_BASE		0x1000C000	/* UART 3 */
+#define REALVIEW_EB_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
+#define REALVIEW_EB_WATCHDOG_BASE	0x10010000	/* watchdog interface */
+#define REALVIEW_EB_TIMER0_1_BASE	0x10011000	/* Timer 0 and 1 */
+#define REALVIEW_EB_TIMER2_3_BASE	0x10012000	/* Timer 2 and 3 */
+#define REALVIEW_EB_GPIO0_BASE		0x10013000	/* GPIO port 0 */
+#define REALVIEW_EB_RTC_BASE		0x10017000	/* Real Time Clock */
+#define REALVIEW_EB_CLCD_BASE		0x10020000	/* CLCD */
+#define REALVIEW_EB_GIC_CPU_BASE	0x10040000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_EB_GIC_DIST_BASE	0x10041000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB_SMC_BASE		0x10080000	/* Static memory controller */
+
+#define REALVIEW_EB_FLASH_BASE		0x40000000
+#define REALVIEW_EB_FLASH_SIZE		SZ_64M
+#define REALVIEW_EB_ETH_BASE		0x4E000000	/* Ethernet */
+#define REALVIEW_EB_USB_BASE		0x4F000000	/* USB */
+
+#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
+#define REALVIEW_EB11MP_SCU_BASE	0x10100000	/* SCU registers */
+#define REALVIEW_EB11MP_GIC_CPU_BASE	0x10100100	/* Generic interrupt controller CPU interface */
+#define REALVIEW_EB11MP_TWD_BASE	0x10100700
+#define REALVIEW_EB11MP_TWD_SIZE	0x00000100
+#define REALVIEW_EB11MP_GIC_DIST_BASE	0x10101000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB11MP_L220_BASE	0x10102000	/* L220 registers */
+#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0xD8		/* Register offset for MPCore sysctl */
+#else
+#define REALVIEW_EB11MP_SCU_BASE	0x1F000000	/* SCU registers */
+#define REALVIEW_EB11MP_GIC_CPU_BASE	0x1F000100	/* Generic interrupt controller CPU interface */
+#define REALVIEW_EB11MP_TWD_BASE	0x1F000700
+#define REALVIEW_EB11MP_TWD_SIZE	0x00000100
+#define REALVIEW_EB11MP_GIC_DIST_BASE	0x1F001000	/* Generic interrupt controller distributor */
+#define REALVIEW_EB11MP_L220_BASE	0x1F002000	/* L220 registers */
+#define REALVIEW_EB11MP_SYS_PLD_CTRL1	0x74		/* Register offset for MPCore sysctl */
+#endif
+
+#define IRQ_EB_GIC_START	32
+
+/*
+ * RealView EB interrupt sources
+ */
+#define IRQ_EB_WDOG		(IRQ_EB_GIC_START + 0)		/* Watchdog timer */
+#define IRQ_EB_SOFT		(IRQ_EB_GIC_START + 1)		/* Software interrupt */
+#define IRQ_EB_COMMRx		(IRQ_EB_GIC_START + 2)		/* Debug Comm Rx interrupt */
+#define IRQ_EB_COMMTx		(IRQ_EB_GIC_START + 3)		/* Debug Comm Tx interrupt */
+#define IRQ_EB_TIMER0_1		(IRQ_EB_GIC_START + 4)		/* Timer 0 and 1 */
+#define IRQ_EB_TIMER2_3		(IRQ_EB_GIC_START + 5)		/* Timer 2 and 3 */
+#define IRQ_EB_GPIO0		(IRQ_EB_GIC_START + 6)		/* GPIO 0 */
+#define IRQ_EB_GPIO1		(IRQ_EB_GIC_START + 7)		/* GPIO 1 */
+#define IRQ_EB_GPIO2		(IRQ_EB_GIC_START + 8)		/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_EB_RTC		(IRQ_EB_GIC_START + 10)		/* Real Time Clock */
+#define IRQ_EB_SSP		(IRQ_EB_GIC_START + 11)		/* Synchronous Serial Port */
+#define IRQ_EB_UART0		(IRQ_EB_GIC_START + 12)		/* UART 0 on development chip */
+#define IRQ_EB_UART1		(IRQ_EB_GIC_START + 13)		/* UART 1 on development chip */
+#define IRQ_EB_UART2		(IRQ_EB_GIC_START + 14)		/* UART 2 on development chip */
+#define IRQ_EB_UART3		(IRQ_EB_GIC_START + 15)		/* UART 3 on development chip */
+#define IRQ_EB_SCI		(IRQ_EB_GIC_START + 16)		/* Smart Card Interface */
+#define IRQ_EB_MMCI0A		(IRQ_EB_GIC_START + 17)		/* Multimedia Card 0A */
+#define IRQ_EB_MMCI0B		(IRQ_EB_GIC_START + 18)		/* Multimedia Card 0B */
+#define IRQ_EB_AACI		(IRQ_EB_GIC_START + 19)		/* Audio Codec */
+#define IRQ_EB_KMI0		(IRQ_EB_GIC_START + 20)		/* Keyboard/Mouse port 0 */
+#define IRQ_EB_KMI1		(IRQ_EB_GIC_START + 21)		/* Keyboard/Mouse port 1 */
+#define IRQ_EB_CHARLCD		(IRQ_EB_GIC_START + 22)		/* Character LCD */
+#define IRQ_EB_CLCD		(IRQ_EB_GIC_START + 23)		/* CLCD controller */
+#define IRQ_EB_DMA		(IRQ_EB_GIC_START + 24)		/* DMA controller */
+#define IRQ_EB_PWRFAIL		(IRQ_EB_GIC_START + 25)		/* Power failure */
+#define IRQ_EB_PISMO		(IRQ_EB_GIC_START + 26)		/* PISMO interface */
+#define IRQ_EB_DoC		(IRQ_EB_GIC_START + 27)		/* Disk on Chip memory controller */
+#define IRQ_EB_ETH		(IRQ_EB_GIC_START + 28)		/* Ethernet controller */
+#define IRQ_EB_USB		(IRQ_EB_GIC_START + 29)		/* USB controller */
+#define IRQ_EB_TSPEN		(IRQ_EB_GIC_START + 30)		/* Touchscreen pen */
+#define IRQ_EB_TSKPAD		(IRQ_EB_GIC_START + 31)		/* Touchscreen keypad */
+
+/*
+ * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
+ */
+#define IRQ_EB11MP_AACI		(IRQ_EB_GIC_START + 0)
+#define IRQ_EB11MP_TIMER0_1	(IRQ_EB_GIC_START + 1)
+#define IRQ_EB11MP_TIMER2_3	(IRQ_EB_GIC_START + 2)
+#define IRQ_EB11MP_USB		(IRQ_EB_GIC_START + 3)
+#define IRQ_EB11MP_UART0	(IRQ_EB_GIC_START + 4)
+#define IRQ_EB11MP_UART1	(IRQ_EB_GIC_START + 5)
+#define IRQ_EB11MP_RTC		(IRQ_EB_GIC_START + 6)
+#define IRQ_EB11MP_KMI0		(IRQ_EB_GIC_START + 7)
+#define IRQ_EB11MP_KMI1		(IRQ_EB_GIC_START + 8)
+#define IRQ_EB11MP_ETH		(IRQ_EB_GIC_START + 9)
+#define IRQ_EB11MP_EB_IRQ1	(IRQ_EB_GIC_START + 10)		/* main GIC */
+#define IRQ_EB11MP_EB_IRQ2	(IRQ_EB_GIC_START + 11)		/* tile GIC */
+#define IRQ_EB11MP_EB_FIQ1	(IRQ_EB_GIC_START + 12)		/* main GIC */
+#define IRQ_EB11MP_EB_FIQ2	(IRQ_EB_GIC_START + 13)		/* tile GIC */
+#define IRQ_EB11MP_MMCI0A	(IRQ_EB_GIC_START + 14)
+#define IRQ_EB11MP_MMCI0B	(IRQ_EB_GIC_START + 15)
+
+#define IRQ_EB11MP_PMU_CPU0	(IRQ_EB_GIC_START + 17)
+#define IRQ_EB11MP_PMU_CPU1	(IRQ_EB_GIC_START + 18)
+#define IRQ_EB11MP_PMU_CPU2	(IRQ_EB_GIC_START + 19)
+#define IRQ_EB11MP_PMU_CPU3	(IRQ_EB_GIC_START + 20)
+#define IRQ_EB11MP_PMU_SCU0	(IRQ_EB_GIC_START + 21)
+#define IRQ_EB11MP_PMU_SCU1	(IRQ_EB_GIC_START + 22)
+#define IRQ_EB11MP_PMU_SCU2	(IRQ_EB_GIC_START + 23)
+#define IRQ_EB11MP_PMU_SCU3	(IRQ_EB_GIC_START + 24)
+#define IRQ_EB11MP_PMU_SCU4	(IRQ_EB_GIC_START + 25)
+#define IRQ_EB11MP_PMU_SCU5	(IRQ_EB_GIC_START + 26)
+#define IRQ_EB11MP_PMU_SCU6	(IRQ_EB_GIC_START + 27)
+#define IRQ_EB11MP_PMU_SCU7	(IRQ_EB_GIC_START + 28)
+
+#define IRQ_EB11MP_L220_EVENT	(IRQ_EB_GIC_START + 29)
+#define IRQ_EB11MP_L220_SLAVE	(IRQ_EB_GIC_START + 30)
+#define IRQ_EB11MP_L220_DECODE	(IRQ_EB_GIC_START + 31)
+
+#define IRQ_EB11MP_UART2	-1
+#define IRQ_EB11MP_UART3	-1
+#define IRQ_EB11MP_CLCD		-1
+#define IRQ_EB11MP_DMA		-1
+#define IRQ_EB11MP_WDOG		-1
+#define IRQ_EB11MP_GPIO0	-1
+#define IRQ_EB11MP_GPIO1	-1
+#define IRQ_EB11MP_GPIO2	-1
+#define IRQ_EB11MP_SCI		-1
+#define IRQ_EB11MP_SSP		-1
+
+#define NR_GIC_EB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_EB
+ */
+#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_EB) \
+	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_EB
+#endif
+
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) \
+	&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_EB11MP
+#endif
+
+/*
+ * Core tile identification (REALVIEW_SYS_PROCID)
+ */
+#define REALVIEW_EB_PROC_MASK		0xFF000000
+#define REALVIEW_EB_PROC_ARM7TDMI	0x00000000
+#define REALVIEW_EB_PROC_ARM9		0x02000000
+#define REALVIEW_EB_PROC_ARM11		0x04000000
+#define REALVIEW_EB_PROC_ARM11MP	0x06000000
+
+#define check_eb_proc(proc_type)						\
+	((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK)	\
+	 == proc_type)
+
+#ifdef CONFIG_REALVIEW_EB_ARM11MP
+#define core_tile_eb11mp()	check_eb_proc(REALVIEW_EB_PROC_ARM11MP)
+#else
+#define core_tile_eb11mp()	0
+#endif
+
+#endif	/* __ASM_ARCH_BOARD_EB_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
new file mode 100644
index 000000000000..858eea7b1adc
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -0,0 +1,152 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-pb1176.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_PB1176_H
+#define __ASM_ARCH_BOARD_PB1176_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PB1176_SCTL_BASE		0x10100000 /* System controller */
+#define REALVIEW_PB1176_SMC_BASE		0x10111000 /* SMC */
+#define REALVIEW_PB1176_DMC_BASE		0x10109000 /* DMC configuration */
+#define REALVIEW_PB1176_SDRAM67_BASE		0x70000000 /* SDRAM banks 6 and 7 */
+#define REALVIEW_PB1176_FLASH_BASE		0x30000000
+#define REALVIEW_PB1176_FLASH_SIZE		SZ_64M
+
+#define REALVIEW_PB1176_TIMER0_1_BASE		0x10104000 /* Timer 0 and 1 */
+#define REALVIEW_PB1176_TIMER2_3_BASE		0x10105000 /* Timer 2 and 3 */
+#define REALVIEW_PB1176_TIMER4_5_BASE		0x10106000 /* Timer 4 and 5 */
+#define REALVIEW_PB1176_WATCHDOG_BASE		0x10107000 /* watchdog interface */
+#define REALVIEW_PB1176_RTC_BASE		0x10108000 /* Real Time Clock */
+#define REALVIEW_PB1176_GPIO0_BASE		0x1010A000 /* GPIO port 0 */
+#define REALVIEW_PB1176_SSP_BASE		0x1010B000 /* Synchronous Serial Port */
+#define REALVIEW_PB1176_UART0_BASE		0x1010C000 /* UART 0 */
+#define REALVIEW_PB1176_UART1_BASE		0x1010D000 /* UART 1 */
+#define REALVIEW_PB1176_UART2_BASE		0x1010E000 /* UART 2 */
+#define REALVIEW_PB1176_UART3_BASE		0x1010F000 /* UART 3 */
+#define REALVIEW_PB1176_CLCD_BASE		0x10112000 /* CLCD */
+#define REALVIEW_PB1176_ETH_BASE		0x3A000000 /* Ethernet */
+#define REALVIEW_PB1176_USB_BASE		0x3B000000 /* USB */
+
+/*
+ * PCI regions
+ */
+#define REALVIEW_PB1176_PCI_BASE		0x60000000 /* PCI self config */
+#define REALVIEW_PB1176_PCI_CFG_BASE		0x61000000 /* PCI config */
+#define REALVIEW_PB1176_PCI_IO_BASE0		0x62000000 /* PCI IO region */
+#define REALVIEW_PB1176_PCI_MEM_BASE0		0x63000000 /* Memory region 1 */
+#define REALVIEW_PB1176_PCI_MEM_BASE1		0x64000000 /* Memory region 2 */
+#define REALVIEW_PB1176_PCI_MEM_BASE2		0x68000000 /* Memory region 3 */
+
+#define REALVIEW_PB1176_PCI_BASE_SIZE		0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_CFG_BASE_SIZE	0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_IO_BASE0_SIZE	0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE0_SIZE	0x01000000 /* 16MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE1_SIZE	0x04000000 /* 64MB */
+#define REALVIEW_PB1176_PCI_MEM_BASE2_SIZE	0x08000000 /* 128MB */
+
+#define REALVIEW_DC1176_GIC_CPU_BASE		0x10120000 /* GIC CPU interface, on devchip */
+#define REALVIEW_DC1176_GIC_DIST_BASE		0x10121000 /* GIC distributor, on devchip */
+#define REALVIEW_PB1176_GIC_CPU_BASE		0x10040000 /* GIC CPU interface, on FPGA */
+#define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
+#define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
+
+/*
+ * Irqs
+ */
+#define IRQ_DC1176_GIC_START			32
+#define IRQ_PB1176_GIC_START			64
+
+/*
+ * ARM1176 DevChip interrupt sources (primary GIC)
+ */
+#define IRQ_DC1176_WATCHDOG	(IRQ_DC1176_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_DC1176_SOFTINT	(IRQ_DC1176_GIC_START + 1)	/* Software interrupt */
+#define IRQ_DC1176_COMMRx	(IRQ_DC1176_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_DC1176_COMMTx	(IRQ_DC1176_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_DC1176_TIMER0	(IRQ_DC1176_GIC_START + 8)	/* Timer 0 */
+#define IRQ_DC1176_TIMER1	(IRQ_DC1176_GIC_START + 9)	/* Timer 1 */
+#define IRQ_DC1176_TIMER2	(IRQ_DC1176_GIC_START + 10)	/* Timer 2 */
+#define IRQ_DC1176_APC		(IRQ_DC1176_GIC_START + 11)
+#define IRQ_DC1176_IEC		(IRQ_DC1176_GIC_START + 12)
+#define IRQ_DC1176_L2CC		(IRQ_DC1176_GIC_START + 13)
+#define IRQ_DC1176_RTC		(IRQ_DC1176_GIC_START + 14)
+#define IRQ_DC1176_CLCD		(IRQ_DC1176_GIC_START + 15)	/* CLCD controller */
+#define IRQ_DC1176_UART0	(IRQ_DC1176_GIC_START + 18)	/* UART 0 on development chip */
+#define IRQ_DC1176_UART1	(IRQ_DC1176_GIC_START + 19)	/* UART 1 on development chip */
+#define IRQ_DC1176_UART2	(IRQ_DC1176_GIC_START + 20)	/* UART 2 on development chip */
+#define IRQ_DC1176_UART3	(IRQ_DC1176_GIC_START + 21)	/* UART 3 on development chip */
+
+#define IRQ_DC1176_PB_IRQ2	(IRQ_DC1176_GIC_START + 30)	/* tile GIC */
+#define IRQ_DC1176_PB_IRQ1	(IRQ_DC1176_GIC_START + 31)	/* main GIC */
+
+/*
+ * RealView PB1176 interrupt sources (secondary GIC)
+ */
+#define IRQ_PB1176_MMCI0A	(IRQ_PB1176_GIC_START + 1)	/* Multimedia Card 0A */
+#define IRQ_PB1176_MMCI0B	(IRQ_PB1176_GIC_START + 2)	/* Multimedia Card 0A */
+#define IRQ_PB1176_KMI0		(IRQ_PB1176_GIC_START + 3)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB1176_KMI1		(IRQ_PB1176_GIC_START + 4)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB1176_SCI		(IRQ_PB1176_GIC_START + 5)
+#define IRQ_PB1176_UART4	(IRQ_PB1176_GIC_START + 6)	/* UART 4 on baseboard */
+#define IRQ_PB1176_CHARLCD	(IRQ_PB1176_GIC_START + 7)	/* Character LCD */
+#define IRQ_PB1176_GPIO1	(IRQ_PB1176_GIC_START + 8)
+#define IRQ_PB1176_GPIO2	(IRQ_PB1176_GIC_START + 9)
+#define IRQ_PB1176_ETH		(IRQ_PB1176_GIC_START + 10)	/* Ethernet controller */
+#define IRQ_PB1176_USB		(IRQ_PB1176_GIC_START + 11)	/* USB controller */
+
+#define IRQ_PB1176_PISMO	(IRQ_PB1176_GIC_START + 16)
+
+#define IRQ_PB1176_AACI		(IRQ_PB1176_GIC_START + 19)	/* Audio Codec */
+
+#define IRQ_PB1176_TIMER0_1	(IRQ_PB1176_GIC_START + 22)
+#define IRQ_PB1176_TIMER2_3	(IRQ_PB1176_GIC_START + 23)
+#define IRQ_PB1176_DMAC		(IRQ_PB1176_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB1176_RTC		(IRQ_PB1176_GIC_START + 25)	/* Real Time Clock */
+
+#define IRQ_PB1176_GPIO0	-1
+#define IRQ_PB1176_SSP		-1
+#define IRQ_PB1176_SCTL		-1
+
+#define NR_GIC_PB1176		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB1176
+ */
+#define NR_IRQS_PB1176		(IRQ_DC1176_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB1176)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB1176
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB1176
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB1176 */
+
+#endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h
new file mode 100644
index 000000000000..ecd80e58631e
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h
@@ -0,0 +1,186 @@
+/*
+ * arch/arm/mach-realview/include/mach/board-pb11mp.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_BOARD_PB11MP_H
+#define __ASM_ARCH_BOARD_PB11MP_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PB11MP_UART0_BASE		0x10009000	/* UART 0 */
+#define REALVIEW_PB11MP_UART1_BASE		0x1000A000	/* UART 1 */
+#define REALVIEW_PB11MP_UART2_BASE		0x1000B000	/* UART 2 */
+#define REALVIEW_PB11MP_UART3_BASE		0x1000C000	/* UART 3 */
+#define REALVIEW_PB11MP_SSP_BASE		0x1000D000	/* Synchronous Serial Port */
+#define REALVIEW_PB11MP_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
+#define REALVIEW_PB11MP_WATCHDOG_BASE		0x10010000	/* watchdog interface */
+#define REALVIEW_PB11MP_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
+#define REALVIEW_PB11MP_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
+#define REALVIEW_PB11MP_GPIO0_BASE		0x10013000	/* GPIO port 0 */
+#define REALVIEW_PB11MP_RTC_BASE		0x10017000	/* Real Time Clock */
+#define REALVIEW_PB11MP_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
+#define REALVIEW_PB11MP_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
+#define REALVIEW_PB11MP_SCTL_BASE		0x1001A000	/* System Controller */
+#define REALVIEW_PB11MP_CLCD_BASE		0x10020000	/* CLCD */
+#define REALVIEW_PB11MP_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
+#define REALVIEW_PB11MP_DMC_BASE		0x100E0000	/* DMC configuration */
+#define REALVIEW_PB11MP_SMC_BASE		0x100E1000	/* SMC configuration */
+#define REALVIEW_PB11MP_CAN_BASE		0x100E2000	/* CAN bus */
+#define REALVIEW_PB11MP_CF_BASE			0x18000000	/* Compact flash */
+#define REALVIEW_PB11MP_CF_MEM_BASE		0x18003000	/* SMC for Compact flash */
+#define REALVIEW_PB11MP_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_PB11MP_FLASH0_BASE		0x40000000
+#define REALVIEW_PB11MP_FLASH0_SIZE		SZ_64M
+#define REALVIEW_PB11MP_FLASH1_BASE		0x44000000
+#define REALVIEW_PB11MP_FLASH1_SIZE		SZ_64M
+#define REALVIEW_PB11MP_ETH_BASE		0x4E000000	/* Ethernet */
+#define REALVIEW_PB11MP_USB_BASE		0x4F000000	/* USB */
+#define REALVIEW_PB11MP_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
+#define REALVIEW_PB11MP_LT_BASE			0xC0000000	/* Logic Tile expansion */
+#define REALVIEW_PB11MP_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
+#define REALVIEW_PB11MP_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */
+
+#define REALVIEW_PB11MP_SYS_PLD_CTRL1		0x74
+
+/*
+ * PB11MPCore PCI regions
+ */
+#define REALVIEW_PB11MP_PCI_BASE		0x90040000	/* PCI-X Unit base */
+#define REALVIEW_PB11MP_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
+#define REALVIEW_PB11MP_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */
+
+#define REALVIEW_PB11MP_PCI_BASE_SIZE		0x10000		/* 16 Kb */
+#define REALVIEW_PB11MP_PCI_IO_SIZE		0x1000		/* 4 Kb */
+#define REALVIEW_PB11MP_PCI_MEM_SIZE		0x20000000	/* 512 MB */
+
+/*
+ * Testchip peripheral and fpga gic regions
+ */
+#define REALVIEW_TC11MP_SCU_BASE		0x1F000000	/* IRQ, Test chip */
+#define REALVIEW_TC11MP_GIC_CPU_BASE		0x1F000100	/* Test chip interrupt controller CPU interface */
+#define REALVIEW_TC11MP_TWD_BASE		0x1F000700
+#define REALVIEW_TC11MP_TWD_SIZE		0x00000100
+#define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
+#define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
+
+/*
+ * Irqs
+ */
+#define IRQ_TC11MP_GIC_START			32
+#define IRQ_PB11MP_GIC_START			64
+
+/*
+ * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
+ */
+#define IRQ_TC11MP_AACI		(IRQ_TC11MP_GIC_START + 0)
+#define IRQ_TC11MP_TIMER0_1	(IRQ_TC11MP_GIC_START + 1)
+#define IRQ_TC11MP_TIMER2_3	(IRQ_TC11MP_GIC_START + 2)
+#define IRQ_TC11MP_USB		(IRQ_TC11MP_GIC_START + 3)
+#define IRQ_TC11MP_UART0	(IRQ_TC11MP_GIC_START + 4)
+#define IRQ_TC11MP_UART1	(IRQ_TC11MP_GIC_START + 5)
+#define IRQ_TC11MP_RTC		(IRQ_TC11MP_GIC_START + 6)
+#define IRQ_TC11MP_KMI0		(IRQ_TC11MP_GIC_START + 7)
+#define IRQ_TC11MP_KMI1		(IRQ_TC11MP_GIC_START + 8)
+#define IRQ_TC11MP_ETH		(IRQ_TC11MP_GIC_START + 9)
+#define IRQ_TC11MP_PB_IRQ1	(IRQ_TC11MP_GIC_START + 10)		/* main GIC */
+#define IRQ_TC11MP_PB_IRQ2	(IRQ_TC11MP_GIC_START + 11)		/* tile GIC */
+#define IRQ_TC11MP_PB_FIQ1	(IRQ_TC11MP_GIC_START + 12)		/* main GIC */
+#define IRQ_TC11MP_PB_FIQ2	(IRQ_TC11MP_GIC_START + 13)		/* tile GIC */
+#define IRQ_TC11MP_MMCI0A	(IRQ_TC11MP_GIC_START + 14)
+#define IRQ_TC11MP_MMCI0B	(IRQ_TC11MP_GIC_START + 15)
+
+#define IRQ_TC11MP_PMU_CPU0	(IRQ_TC11MP_GIC_START + 17)
+#define IRQ_TC11MP_PMU_CPU1	(IRQ_TC11MP_GIC_START + 18)
+#define IRQ_TC11MP_PMU_CPU2	(IRQ_TC11MP_GIC_START + 19)
+#define IRQ_TC11MP_PMU_CPU3	(IRQ_TC11MP_GIC_START + 20)
+#define IRQ_TC11MP_PMU_SCU0	(IRQ_TC11MP_GIC_START + 21)
+#define IRQ_TC11MP_PMU_SCU1	(IRQ_TC11MP_GIC_START + 22)
+#define IRQ_TC11MP_PMU_SCU2	(IRQ_TC11MP_GIC_START + 23)
+#define IRQ_TC11MP_PMU_SCU3	(IRQ_TC11MP_GIC_START + 24)
+#define IRQ_TC11MP_PMU_SCU4	(IRQ_TC11MP_GIC_START + 25)
+#define IRQ_TC11MP_PMU_SCU5	(IRQ_TC11MP_GIC_START + 26)
+#define IRQ_TC11MP_PMU_SCU6	(IRQ_TC11MP_GIC_START + 27)
+#define IRQ_TC11MP_PMU_SCU7	(IRQ_TC11MP_GIC_START + 28)
+
+#define IRQ_TC11MP_L220_EVENT	(IRQ_TC11MP_GIC_START + 29)
+#define IRQ_TC11MP_L220_SLAVE	(IRQ_TC11MP_GIC_START + 30)
+#define IRQ_TC11MP_L220_DECODE	(IRQ_TC11MP_GIC_START + 31)
+
+/*
+ * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
+ */
+#define IRQ_PB11MP_WATCHDOG	(IRQ_PB11MP_GIC_START + 0)	/* Watchdog timer */
+#define IRQ_PB11MP_SOFT		(IRQ_PB11MP_GIC_START + 1)	/* Software interrupt */
+#define IRQ_PB11MP_COMMRx	(IRQ_PB11MP_GIC_START + 2)	/* Debug Comm Rx interrupt */
+#define IRQ_PB11MP_COMMTx	(IRQ_PB11MP_GIC_START + 3)	/* Debug Comm Tx interrupt */
+#define IRQ_PB11MP_GPIO0	(IRQ_PB11MP_GIC_START + 6)	/* GPIO 0 */
+#define IRQ_PB11MP_GPIO1	(IRQ_PB11MP_GIC_START + 7)	/* GPIO 1 */
+#define IRQ_PB11MP_GPIO2	(IRQ_PB11MP_GIC_START + 8)	/* GPIO 2 */
+								/* 9 reserved */
+#define IRQ_PB11MP_RTC_GIC1	(IRQ_PB11MP_GIC_START + 10)	/* Real Time Clock */
+#define IRQ_PB11MP_SSP		(IRQ_PB11MP_GIC_START + 11)	/* Synchronous Serial Port */
+#define IRQ_PB11MP_UART0_GIC1	(IRQ_PB11MP_GIC_START + 12)	/* UART 0 on development chip */
+#define IRQ_PB11MP_UART1_GIC1	(IRQ_PB11MP_GIC_START + 13)	/* UART 1 on development chip */
+#define IRQ_PB11MP_UART2	(IRQ_PB11MP_GIC_START + 14)	/* UART 2 on development chip */
+#define IRQ_PB11MP_UART3	(IRQ_PB11MP_GIC_START + 15)	/* UART 3 on development chip */
+#define IRQ_PB11MP_SCI		(IRQ_PB11MP_GIC_START + 16)	/* Smart Card Interface */
+#define IRQ_PB11MP_MMCI0A_GIC1	(IRQ_PB11MP_GIC_START + 17)	/* Multimedia Card 0A */
+#define IRQ_PB11MP_MMCI0B_GIC1	(IRQ_PB11MP_GIC_START + 18)	/* Multimedia Card 0B */
+#define IRQ_PB11MP_AACI_GIC1	(IRQ_PB11MP_GIC_START + 19)	/* Audio Codec */
+#define IRQ_PB11MP_KMI0_GIC1	(IRQ_PB11MP_GIC_START + 20)	/* Keyboard/Mouse port 0 */
+#define IRQ_PB11MP_KMI1_GIC1	(IRQ_PB11MP_GIC_START + 21)	/* Keyboard/Mouse port 1 */
+#define IRQ_PB11MP_CHARLCD	(IRQ_PB11MP_GIC_START + 22)	/* Character LCD */
+#define IRQ_PB11MP_CLCD		(IRQ_PB11MP_GIC_START + 23)	/* CLCD controller */
+#define IRQ_PB11MP_DMAC		(IRQ_PB11MP_GIC_START + 24)	/* DMA controller */
+#define IRQ_PB11MP_PWRFAIL	(IRQ_PB11MP_GIC_START + 25)	/* Power failure */
+#define IRQ_PB11MP_PISMO	(IRQ_PB11MP_GIC_START + 26)	/* PISMO interface */
+#define IRQ_PB11MP_DoC		(IRQ_PB11MP_GIC_START + 27)	/* Disk on Chip memory controller */
+#define IRQ_PB11MP_ETH_GIC1	(IRQ_PB11MP_GIC_START + 28)	/* Ethernet controller */
+#define IRQ_PB11MP_USB_GIC1	(IRQ_PB11MP_GIC_START + 29)	/* USB controller */
+#define IRQ_PB11MP_TSPEN	(IRQ_PB11MP_GIC_START + 30)	/* Touchscreen pen */
+#define IRQ_PB11MP_TSKPAD	(IRQ_PB11MP_GIC_START + 31)	/* Touchscreen keypad */
+
+#define IRQ_PB11MP_SMC		-1
+#define IRQ_PB11MP_SCTL		-1
+
+#define NR_GIC_PB11MP		2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB11MP
+ */
+#define NR_IRQS_PB11MP		(IRQ_TC11MP_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB11MP)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
+#undef NR_IRQS
+#define NR_IRQS			NR_IRQS_PB11MP
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR		NR_GIC_PB11MP
+#endif
+
+#endif	/* CONFIG_MACH_REALVIEW_PB11MP */
+
+#endif	/* __ASM_ARCH_BOARD_PB11MP_H */
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
new file mode 100644
index 000000000000..7196bcadff0c
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -0,0 +1,22 @@
+/* arch/arm/mach-realview/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx,      #0x10000000
+		movne	\rx,      #0xf0000000	@ virtual base
+		orr	\rx, \rx, #0x00009000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-realview/include/mach/dma.h b/arch/arm/mach-realview/include/mach/dma.h
new file mode 100644
index 000000000000..f1a5a1a10952
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/dma.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-realview/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S
new file mode 100644
index 000000000000..340a5c276946
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/entry-macro.S
@@ -0,0 +1,81 @@
+/*
+ * arch/arm/mach-realview/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for RealView platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =gic_cpu_base_addr
+		ldr	\base, [\base]
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an interrupt if it's
+		 * between 30 and 1020.  The test_for_ipi routine below will pick up on IPIs.
+		 *
+		 * A simple read from the controller will tell us the number of the highest
+                 * priority enabled interrupt.  We then just need to check whether it is in the
+		 * valid range for an IRQ (30-1020 inclusive).
+		 */
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
+
+		ldr	\tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc	\irqnr, \irqnr
+		cmpne	\irqnr, \tmp
+		cmpcs	\irqnr, \irqnr
+
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ acknowledge
+		 * register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of interrupt on the
+		 * controller, since this requires the original irqstat value which
+		 * we won't easily be able to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base are preserved.. */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov 	\tmp, #0
+		cmp	\irqnr, #29
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h
new file mode 100644
index 000000000000..79a93b3dfca9
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/hardware.h
@@ -0,0 +1,31 @@
+/*
+ *  arch/arm/mach-realview/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the RealView boards.
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + 0xf0000000)
+#define __io_address(n)		__io(IO_ADDRESS(n))
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/io.h b/arch/arm/mach-realview/include/mach/io.h
new file mode 100644
index 000000000000..aa069424d310
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/io.h
@@ -0,0 +1,33 @@
+/*
+ *  arch/arm/mach-realview/include/mach/io.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/irqs.h b/arch/arm/mach-realview/include/mach/irqs.h
new file mode 100644
index 000000000000..02a918529db3
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/irqs.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-realview/include/mach/irqs.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/board-pb1176.h>
+
+#define IRQ_LOCALTIMER		29
+#define IRQ_LOCALWDOG		30
+
+#define IRQ_GIC_START		32
+
+#ifndef NR_IRQS
+#error "NR_IRQS not defined by the board-specific files"
+#endif
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h
new file mode 100644
index 000000000000..0e673483a141
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/memory.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-realview/include/mach/memory.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET		UL(0x00000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
+#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
new file mode 100644
index 000000000000..4034b54950c2
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -0,0 +1,293 @@
+/*
+ * arch/arm/mach-realview/include/mach/platform.h
+ *
+ * Copyright (c) ARM Limited 2003.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_PLATFORM_H
+#define __ASM_ARCH_PLATFORM_H
+
+/*
+ * Memory definitions
+ */
+#define REALVIEW_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
+#define REALVIEW_BOOT_ROM_HI          0x30000000
+#define REALVIEW_BOOT_ROM_BASE        REALVIEW_BOOT_ROM_HI	 /*  Normal position */
+#define REALVIEW_BOOT_ROM_SIZE        SZ_64M
+
+#define REALVIEW_SSRAM_BASE           /* REALVIEW_SSMC_BASE ? */
+#define REALVIEW_SSRAM_SIZE           SZ_2M
+
+/* 
+ *  SDRAM
+ */
+#define REALVIEW_SDRAM_BASE           0x00000000
+
+/* 
+ *  Logic expansion modules
+ * 
+ */
+
+
+/* ------------------------------------------------------------------------
+ *  RealView Registers
+ * ------------------------------------------------------------------------
+ * 
+ */
+#define REALVIEW_SYS_ID_OFFSET               0x00
+#define REALVIEW_SYS_SW_OFFSET               0x04
+#define REALVIEW_SYS_LED_OFFSET              0x08
+#define REALVIEW_SYS_OSC0_OFFSET             0x0C
+
+#define REALVIEW_SYS_OSC1_OFFSET             0x10
+#define REALVIEW_SYS_OSC2_OFFSET             0x14
+#define REALVIEW_SYS_OSC3_OFFSET             0x18
+#define REALVIEW_SYS_OSC4_OFFSET             0x1C	/* OSC1 for RealView/AB */
+
+#define REALVIEW_SYS_LOCK_OFFSET             0x20
+#define REALVIEW_SYS_100HZ_OFFSET            0x24
+#define REALVIEW_SYS_CFGDATA1_OFFSET         0x28
+#define REALVIEW_SYS_CFGDATA2_OFFSET         0x2C
+#define REALVIEW_SYS_FLAGS_OFFSET            0x30
+#define REALVIEW_SYS_FLAGSSET_OFFSET         0x30
+#define REALVIEW_SYS_FLAGSCLR_OFFSET         0x34
+#define REALVIEW_SYS_NVFLAGS_OFFSET          0x38
+#define REALVIEW_SYS_NVFLAGSSET_OFFSET       0x38
+#define REALVIEW_SYS_NVFLAGSCLR_OFFSET       0x3C
+#define REALVIEW_SYS_RESETCTL_OFFSET         0x40
+#define REALVIEW_SYS_PCICTL_OFFSET           0x44
+#define REALVIEW_SYS_MCI_OFFSET              0x48
+#define REALVIEW_SYS_FLASH_OFFSET            0x4C
+#define REALVIEW_SYS_CLCD_OFFSET             0x50
+#define REALVIEW_SYS_CLCDSER_OFFSET          0x54
+#define REALVIEW_SYS_BOOTCS_OFFSET           0x58
+#define REALVIEW_SYS_24MHz_OFFSET            0x5C
+#define REALVIEW_SYS_MISC_OFFSET             0x60
+#define REALVIEW_SYS_IOSEL_OFFSET            0x70
+#define REALVIEW_SYS_PROCID_OFFSET           0x84
+#define REALVIEW_SYS_TEST_OSC0_OFFSET        0xC0
+#define REALVIEW_SYS_TEST_OSC1_OFFSET        0xC4
+#define REALVIEW_SYS_TEST_OSC2_OFFSET        0xC8
+#define REALVIEW_SYS_TEST_OSC3_OFFSET        0xCC
+#define REALVIEW_SYS_TEST_OSC4_OFFSET        0xD0
+
+#define REALVIEW_SYS_BASE                    0x10000000
+#define REALVIEW_SYS_ID                      (REALVIEW_SYS_BASE + REALVIEW_SYS_ID_OFFSET)
+#define REALVIEW_SYS_SW                      (REALVIEW_SYS_BASE + REALVIEW_SYS_SW_OFFSET)
+#define REALVIEW_SYS_LED                     (REALVIEW_SYS_BASE + REALVIEW_SYS_LED_OFFSET)
+#define REALVIEW_SYS_OSC0                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC0_OFFSET)
+#define REALVIEW_SYS_OSC1                    (REALVIEW_SYS_BASE + REALVIEW_SYS_OSC1_OFFSET)
+
+#define REALVIEW_SYS_LOCK                    (REALVIEW_SYS_BASE + REALVIEW_SYS_LOCK_OFFSET)
+#define REALVIEW_SYS_100HZ                   (REALVIEW_SYS_BASE + REALVIEW_SYS_100HZ_OFFSET)
+#define REALVIEW_SYS_CFGDATA1                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA1_OFFSET)
+#define REALVIEW_SYS_CFGDATA2                (REALVIEW_SYS_BASE + REALVIEW_SYS_CFGDATA2_OFFSET)
+#define REALVIEW_SYS_FLAGS                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGS_OFFSET)
+#define REALVIEW_SYS_FLAGSSET                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSSET_OFFSET)
+#define REALVIEW_SYS_FLAGSCLR                (REALVIEW_SYS_BASE + REALVIEW_SYS_FLAGSCLR_OFFSET)
+#define REALVIEW_SYS_NVFLAGS                 (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGS_OFFSET)
+#define REALVIEW_SYS_NVFLAGSSET              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSSET_OFFSET)
+#define REALVIEW_SYS_NVFLAGSCLR              (REALVIEW_SYS_BASE + REALVIEW_SYS_NVFLAGSCLR_OFFSET)
+#define REALVIEW_SYS_RESETCTL                (REALVIEW_SYS_BASE + REALVIEW_SYS_RESETCTL_OFFSET)
+#define REALVIEW_SYS_PCICTL                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PCICTL_OFFSET)
+#define REALVIEW_SYS_MCI                     (REALVIEW_SYS_BASE + REALVIEW_SYS_MCI_OFFSET)
+#define REALVIEW_SYS_FLASH                   (REALVIEW_SYS_BASE + REALVIEW_SYS_FLASH_OFFSET)
+#define REALVIEW_SYS_CLCD                    (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCD_OFFSET)
+#define REALVIEW_SYS_CLCDSER                 (REALVIEW_SYS_BASE + REALVIEW_SYS_CLCDSER_OFFSET)
+#define REALVIEW_SYS_BOOTCS                  (REALVIEW_SYS_BASE + REALVIEW_SYS_BOOTCS_OFFSET)
+#define REALVIEW_SYS_24MHz                   (REALVIEW_SYS_BASE + REALVIEW_SYS_24MHz_OFFSET)
+#define REALVIEW_SYS_MISC                    (REALVIEW_SYS_BASE + REALVIEW_SYS_MISC_OFFSET)
+#define REALVIEW_SYS_IOSEL                   (REALVIEW_SYS_BASE + REALVIEW_SYS_IOSEL_OFFSET)
+#define REALVIEW_SYS_PROCID                  (REALVIEW_SYS_BASE + REALVIEW_SYS_PROCID_OFFSET)
+#define REALVIEW_SYS_TEST_OSC0               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC0_OFFSET)
+#define REALVIEW_SYS_TEST_OSC1               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC1_OFFSET)
+#define REALVIEW_SYS_TEST_OSC2               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC2_OFFSET)
+#define REALVIEW_SYS_TEST_OSC3               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
+#define REALVIEW_SYS_TEST_OSC4               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
+
+/* 
+ * Values for REALVIEW_SYS_RESET_CTRL
+ */
+#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR    0x01
+#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT   0x02
+#define REALVIEW_SYS_CTRL_RESET_DLLRESET     0x03
+#define REALVIEW_SYS_CTRL_RESET_PLLRESET     0x04
+#define REALVIEW_SYS_CTRL_RESET_POR          0x05
+#define REALVIEW_SYS_CTRL_RESET_DoC          0x06
+
+#define REALVIEW_SYS_CTRL_LED         (1 << 0)
+
+
+/* ------------------------------------------------------------------------
+ *  RealView control registers
+ * ------------------------------------------------------------------------
+ */
+
+/* 
+ * REALVIEW_IDFIELD
+ *
+ * 31:24 = manufacturer (0x41 = ARM)
+ * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
+ * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
+ * 11:4  = build value
+ * 3:0   = revision number (0x1 = rev B (AHB))
+ */
+
+/*
+ * REALVIEW_SYS_LOCK
+ *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
+ *     SYS_CLD, SYS_BOOTCS
+ */
+#define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
+#define REALVIEW_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
+
+/*
+ * REALVIEW_SYS_FLASH
+ */
+#define REALVIEW_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
+
+/*
+ * REALVIEW_INTREG
+ *     - used to acknowledge and control MMCI and UART interrupts 
+ */
+#define REALVIEW_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
+#define REALVIEW_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
+#define REALVIEW_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
+                                                /* write 1 to acknowledge and clear               */
+#define REALVIEW_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
+#define REALVIEW_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
+
+/*
+ * RealView common peripheral addresses
+ */
+#define REALVIEW_SCTL_BASE            0x10001000	/* System controller */
+#define REALVIEW_I2C_BASE             0x10002000	/* I2C control */
+#define REALVIEW_AACI_BASE            0x10004000	/* Audio */
+#define REALVIEW_MMCI0_BASE           0x10005000	/* MMC interface */
+#define REALVIEW_KMI0_BASE            0x10006000	/* KMI interface */
+#define REALVIEW_KMI1_BASE            0x10007000	/* KMI 2nd interface */
+#define REALVIEW_CHAR_LCD_BASE        0x10008000	/* Character LCD */
+#define REALVIEW_SCI_BASE             0x1000E000	/* Smart card controller */
+#define REALVIEW_GPIO1_BASE           0x10014000	/* GPIO port 1 */
+#define REALVIEW_GPIO2_BASE           0x10015000	/* GPIO port 2 */
+#define REALVIEW_DMC_BASE             0x10018000	/* DMC configuration */
+#define REALVIEW_DMAC_BASE            0x10030000	/* DMA controller */
+
+/* PCI space */
+#define REALVIEW_PCI_BASE             0x41000000	/* PCI Interface */
+#define REALVIEW_PCI_CFG_BASE	      0x42000000
+#define REALVIEW_PCI_MEM_BASE0        0x44000000
+#define REALVIEW_PCI_MEM_BASE1        0x50000000
+#define REALVIEW_PCI_MEM_BASE2        0x60000000
+/* Sizes of above maps */
+#define REALVIEW_PCI_BASE_SIZE	       0x01000000
+#define REALVIEW_PCI_CFG_BASE_SIZE    0x02000000
+#define REALVIEW_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
+#define REALVIEW_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
+#define REALVIEW_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
+
+#define REALVIEW_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
+#define REALVIEW_LT_BASE              0x80000000	/* Logic Tile expansion */
+
+/*
+ * Disk on Chip
+ */
+#define REALVIEW_DOC_BASE             0x2C000000
+#define REALVIEW_DOC_SIZE             (16 << 20)
+#define REALVIEW_DOC_PAGE_SIZE        512
+#define REALVIEW_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
+
+#define ERASE_UNIT_PAGES    32
+#define START_PAGE          0x80
+
+/* 
+ *  LED settings, bits [7:0]
+ */
+#define REALVIEW_SYS_LED0             (1 << 0)
+#define REALVIEW_SYS_LED1             (1 << 1)
+#define REALVIEW_SYS_LED2             (1 << 2)
+#define REALVIEW_SYS_LED3             (1 << 3)
+#define REALVIEW_SYS_LED4             (1 << 4)
+#define REALVIEW_SYS_LED5             (1 << 5)
+#define REALVIEW_SYS_LED6             (1 << 6)
+#define REALVIEW_SYS_LED7             (1 << 7)
+
+#define ALL_LEDS                  0xFF
+
+#define LED_BANK                  REALVIEW_SYS_LED
+
+/* 
+ * Control registers
+ */
+#define REALVIEW_IDFIELD_OFFSET	0x0	/* RealView build information */
+#define REALVIEW_FLASHPROG_OFFSET	0x4	/* Flash devices */
+#define REALVIEW_INTREG_OFFSET		0x8	/* Interrupt control */
+#define REALVIEW_DECODE_OFFSET		0xC	/* Fitted logic modules */
+
+/* 
+ *  Application Flash
+ * 
+ */
+#define FLASH_BASE                      REALVIEW_FLASH_BASE
+#define FLASH_SIZE                      REALVIEW_FLASH_SIZE
+#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
+#define FLASH_BLOCK_SIZE                SZ_128K
+
+/* 
+ *  Boot Flash
+ * 
+ */
+#define EPROM_BASE                      REALVIEW_BOOT_ROM_HI
+#define EPROM_SIZE                      REALVIEW_BOOT_ROM_SIZE
+#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
+
+/* 
+ *  Clean base - dummy
+ * 
+ */
+#define CLEAN_BASE                      EPROM_BASE
+
+/*
+ * System controller bit assignment
+ */
+#define REALVIEW_REFCLK	0
+#define REALVIEW_TIMCLK	1
+
+#define REALVIEW_TIMER1_EnSel	15
+#define REALVIEW_TIMER2_EnSel	17
+#define REALVIEW_TIMER3_EnSel	19
+#define REALVIEW_TIMER4_EnSel	21
+
+
+#define MAX_TIMER                       2
+#define MAX_PERIOD                      699050
+#define TICKS_PER_uSEC                  1
+
+/* 
+ *  These are useconds NOT ticks.  
+ * 
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+#define REALVIEW_CSR_BASE             0x10000000
+#define REALVIEW_CSR_SIZE             0x10000000
+
+#endif	/* __ASM_ARCH_PLATFORM_H */
diff --git a/arch/arm/mach-realview/include/mach/scu.h b/arch/arm/mach-realview/include/mach/scu.h
new file mode 100644
index 000000000000..d55802d645af
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/scu.h
@@ -0,0 +1,13 @@
+#ifndef __ASMARM_ARCH_SCU_H
+#define __ASMARM_ARCH_SCU_H
+
+/*
+ * SCU registers
+ */
+#define SCU_CTRL		0x00
+#define SCU_CONFIG		0x04
+#define SCU_CPU_STATUS		0x08
+#define SCU_INVALIDATE		0x0c
+#define SCU_FPGA_REVISION	0x10
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h
new file mode 100644
index 000000000000..515819efd046
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/smp.h
@@ -0,0 +1,30 @@
+#ifndef ASMARM_ARCH_SMP_H
+#define ASMARM_ARCH_SMP_H
+
+
+#include <asm/hardware/gic.h>
+
+#define hard_smp_processor_id()			\
+	({						\
+		unsigned int cpunum;			\
+		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
+			: "=r" (cpunum));		\
+		cpunum &= 0x0F;				\
+	})
+
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(cpumask_t callmap)
+{
+	gic_raise_softirq(callmap, 1);
+}
+
+/*
+ * Do nothing on MPcore.
+ */
+static inline void smp_cross_call_done(cpumask_t callmap)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
new file mode 100644
index 000000000000..4d3c8f3f8053
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/system.h
@@ -0,0 +1,51 @@
+/*
+ *  arch/arm/mach-realview/include/mach/system.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/platform.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
+	unsigned int val;
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	val = __raw_readl(hdr_ctrl);
+	val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
+	__raw_writel(val, hdr_ctrl);
+}
+
+#endif
diff --git a/arch/arm/mach-realview/include/mach/timex.h b/arch/arm/mach-realview/include/mach/timex.h
new file mode 100644
index 000000000000..4eeb069373c2
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/mach-realview/include/mach/timex.h
+ *
+ *  RealView architecture timex specifications
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
new file mode 100644
index 000000000000..79f50f218e77
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -0,0 +1,72 @@
+/*
+ *  arch/arm/mach-realview/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/board-pb1176.h>
+
+#define AMBA_UART_DR(base)	(*(volatile unsigned char *)((base) + 0x00))
+#define AMBA_UART_LCRH(base)	(*(volatile unsigned char *)((base) + 0x2c))
+#define AMBA_UART_CR(base)	(*(volatile unsigned char *)((base) + 0x30))
+#define AMBA_UART_FR(base)	(*(volatile unsigned char *)((base) + 0x18))
+
+/*
+ * Return the UART base address
+ */
+static inline unsigned long get_uart_base(void)
+{
+	if (machine_is_realview_eb())
+		return REALVIEW_EB_UART0_BASE;
+	else if (machine_is_realview_pb11mp())
+		return REALVIEW_PB11MP_UART0_BASE;
+	else if (machine_is_realview_pb1176())
+		return REALVIEW_PB1176_UART0_BASE;
+	else
+		return 0;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR(base) = c;
+}
+
+static inline void flush(void)
+{
+	unsigned long base = get_uart_base();
+
+	while (AMBA_UART_FR(base) & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-realview/include/mach/vmalloc.h b/arch/arm/mach-realview/include/mach/vmalloc.h
new file mode 100644
index 000000000000..48cbcc873db2
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-realview/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index 50604360479f..82fa1f26e026 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -20,7 +20,7 @@
 
 #include <asm/hardware/arm_twd.h>
 #include <asm/hardware/gic.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 8e813ed57519..1907d22f4fed 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -15,13 +15,13 @@
 #include <linux/smp.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/board-eb.h>
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/scu.h>
+#include <mach/board-eb.h>
+#include <mach/board-pb11mp.h>
+#include <mach/scu.h>
 
 extern void realview_secondary_startup(void);
 
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 5782d83fd886..19a9968fc5b9 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -38,8 +38,8 @@
 #include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/board-eb.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-eb.h>
+#include <mach/irqs.h>
 
 #include "core.h"
 #include "clock.h"
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index cf7f576a5860..0986cbd15943 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -39,8 +39,8 @@
 #include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/board-pb1176.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-pb1176.h>
+#include <mach/irqs.h>
 
 #include "core.h"
 #include "clock.h"
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index f7ce1c5a178a..f4e7135e3eb5 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
@@ -39,8 +39,8 @@
 #include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
-#include <asm/arch/board-pb11mp.h>
-#include <asm/arch/irqs.h>
+#include <mach/board-pb11mp.h>
+#include <mach/irqs.h>
 
 #include "core.h"
 #include "clock.h"
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c
index 596379a4cf82..4b19fe484190 100644
--- a/arch/arm/mach-rpc/dma.c
+++ b/arch/arm/mach-rpc/dma.c
@@ -20,7 +20,7 @@
 #include <asm/fiq.h>
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/uaccess.h>
 
 #include <asm/mach/dma.h>
diff --git a/arch/arm/mach-rpc/include/mach/acornfb.h b/arch/arm/mach-rpc/include/mach/acornfb.h
new file mode 100644
index 000000000000..395d76288ffe
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/acornfb.h
@@ -0,0 +1,140 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/acornfb.h
+ *
+ *  Copyright (C) 1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  AcornFB architecture specific code
+ */
+
+#define acornfb_bandwidth(var) ((var)->pixclock * 8 / (var)->bits_per_pixel)
+
+static inline int
+acornfb_valid_pixrate(struct fb_var_screeninfo *var)
+{
+	u_long limit;
+
+	if (!var->pixclock)
+		return 0;
+
+	/*
+	 * Limits below are taken from RISC OS bandwidthlimit file
+	 */
+	if (current_par.using_vram) {
+		if (current_par.vram_half_sam == 2048)
+			limit = 6578;
+		else
+			limit = 13157;
+	} else {
+		limit = 26315;
+	}
+
+	return acornfb_bandwidth(var) >= limit;
+}
+
+/*
+ * Try to find the best PLL parameters for the pixel clock.
+ * This algorithm seems to give best predictable results,
+ * and produces the same values as detailed in the VIDC20
+ * data sheet.
+ */
+static inline u_int
+acornfb_vidc20_find_pll(u_int pixclk)
+{
+	u_int r, best_r = 2, best_v = 2;
+	int best_d = 0x7fffffff;
+
+	for (r = 2; r <= 32; r++) {
+		u_int rr, v, p;
+		int d;
+
+		rr = 41667 * r;
+
+		v = (rr + pixclk / 2) / pixclk;
+
+		if (v > 32 || v < 2)
+			continue;
+
+		p = (rr + v / 2) / v;
+
+		d = pixclk - p;
+
+		if (d < 0)
+			d = -d;
+
+		if (d < best_d) {
+			best_d = d;
+			best_v = v - 1;
+			best_r = r - 1;
+		}
+
+		if (d == 0)
+			break;
+	}
+
+	return best_v << 8 | best_r;
+}
+
+static inline void
+acornfb_vidc20_find_rates(struct vidc_timing *vidc,
+			  struct fb_var_screeninfo *var)
+{
+	u_int div;
+
+	/* Select pixel-clock divisor to keep PLL in range */
+	div = var->pixclock / 9090; /*9921*/
+
+	/* Limit divisor */
+	if (div == 0)
+		div = 1;
+	if (div > 8)
+		div = 8;
+
+	/* Encode divisor to VIDC20 setting */
+	switch (div) {
+	case 1:	vidc->control |= VIDC20_CTRL_PIX_CK;  break;
+	case 2:	vidc->control |= VIDC20_CTRL_PIX_CK2; break;
+	case 3:	vidc->control |= VIDC20_CTRL_PIX_CK3; break;
+	case 4:	vidc->control |= VIDC20_CTRL_PIX_CK4; break;
+	case 5:	vidc->control |= VIDC20_CTRL_PIX_CK5; break;
+	case 6:	vidc->control |= VIDC20_CTRL_PIX_CK6; break;
+	case 7:	vidc->control |= VIDC20_CTRL_PIX_CK7; break;
+	case 8: vidc->control |= VIDC20_CTRL_PIX_CK8; break;
+	}
+
+	/*
+	 * With VRAM, the FIFO can be set to the highest possible setting
+	 * because there are no latency considerations for other memory
+	 * accesses. However, in 64 bit bus mode the FIFO preload value
+	 * must not be set to VIDC20_CTRL_FIFO_28 because this will let
+	 * the FIFO overflow. See VIDC20 manual page 33 (6.0 Setting the
+	 * FIFO preload value).
+	 */
+	if (current_par.using_vram) {
+		if (current_par.vram_half_sam == 2048)
+			vidc->control |= VIDC20_CTRL_FIFO_24;
+		else
+			vidc->control |= VIDC20_CTRL_FIFO_28;
+	} else {
+		unsigned long bandwidth = acornfb_bandwidth(var);
+
+		/* Encode bandwidth as VIDC20 setting */
+		if (bandwidth > 33334)		/* < 30.0MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_16;
+		else if (bandwidth > 26666)	/* < 37.5MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_20;
+		else if (bandwidth > 22222)	/* < 45.0MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_24;
+		else				/* > 45.0MB/s */
+			vidc->control |= VIDC20_CTRL_FIFO_28;
+	}
+
+	/* Find the PLL values */
+	vidc->pll_ctl = acornfb_vidc20_find_pll(var->pixclock / div);
+}
+
+#define acornfb_default_control()	(VIDC20_CTRL_PIX_VCLK)
+#define acornfb_default_econtrol()	(VIDC20_ECTL_DAC | VIDC20_ECTL_REG(3))
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
new file mode 100644
index 000000000000..b2a939ffdcde
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -0,0 +1,25 @@
+/* arch/arm/mach-rpc/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x03000000
+		movne	\rx, #0xe0000000
+		orr	\rx, \rx, #0x00010000
+		orr	\rx, \rx, #0x00000fe0
+		.endm
+
+#define UART_SHIFT	2
+#define FLOW_CONTROL
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-rpc/include/mach/dma.h b/arch/arm/mach-rpc/include/mach/dma.h
new file mode 100644
index 000000000000..360b56f8f29f
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/dma.h
@@ -0,0 +1,33 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/dma.h
+ *
+ *  Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * This is the maximum DMA address that can be DMAd to.
+ * There should not be more than (0xd0000000 - 0xc0000000)
+ * bytes of RAM.
+ */
+#define MAX_DMA_ADDRESS		0xd0000000
+#define MAX_DMA_CHANNELS	8
+
+#define DMA_0			0
+#define DMA_1			1
+#define DMA_2			2
+#define DMA_3			3
+#define DMA_S0			4
+#define DMA_S1			5
+#define DMA_VIRTUAL_FLOPPY	6
+#define DMA_VIRTUAL_SOUND	7
+
+#define DMA_FLOPPY		DMA_VIRTUAL_FLOPPY
+
+#endif /* _ASM_ARCH_DMA_H */
+
diff --git a/arch/arm/mach-rpc/include/mach/entry-macro.S b/arch/arm/mach-rpc/include/mach/entry-macro.S
new file mode 100644
index 000000000000..4e7e54144093
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/entry-macro.S
@@ -0,0 +1,16 @@
+#include <mach/hardware.h>
+#include <asm/hardware/entry-macro-iomd.S>
+
+	.equ	ioc_base_high, IOC_BASE & 0xff000000
+	.equ	ioc_base_low, IOC_BASE & 0x00ff0000
+
+	.macro  get_irqnr_preamble, base, tmp
+	mov	\base, #ioc_base_high		@ point at IOC
+	.if	ioc_base_low
+	orr	\base, \base, #ioc_base_low
+	.endif
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h
new file mode 100644
index 000000000000..dde6b3c0e299
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/hardware.h
@@ -0,0 +1,83 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/hardware.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  This file contains the hardware definitions of the RiscPC series machines.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <mach/memory.h>
+
+#ifndef __ASSEMBLY__
+#define IOMEM(x) ((void __iomem *)(unsigned long)(x))
+#else
+#define IOMEM(x) x
+#endif /* __ASSEMBLY__ */
+
+/*
+ * What hardware must be present
+ */
+#define HAS_IOMD
+#define HAS_VIDC20
+
+/* Hardware addresses of major areas.
+ *  *_START is the physical address
+ *  *_SIZE  is the size of the region
+ *  *_BASE  is the virtual address
+ */
+#define RAM_SIZE		0x10000000
+#define RAM_START		0x10000000
+
+#define EASI_SIZE		0x08000000	/* EASI I/O */
+#define EASI_START		0x08000000
+#define EASI_BASE		0xe5000000
+
+#define IO_START		0x03000000	/* I/O */
+#define IO_SIZE			0x01000000
+#define IO_BASE			IOMEM(0xe0000000)
+
+#define SCREEN_START		0x02000000	/* VRAM */
+#define SCREEN_END		0xdfc00000
+#define SCREEN_BASE		0xdf800000
+
+#define UNCACHEABLE_ADDR	0xdf010000
+
+/*
+ * IO Addresses
+ */
+#define VIDC_BASE		IOMEM(0xe0400000)
+#define EXPMASK_BASE		0xe0360000
+#define IOMD_BASE		IOMEM(0xe0200000)
+#define IOC_BASE		IOMEM(0xe0200000)
+#define PCIO_BASE		IOMEM(0xe0010000)
+#define FLOPPYDMA_BASE		IOMEM(0xe002a000)
+
+#define vidc_writel(val)	__raw_writel(val, VIDC_BASE)
+
+#define IO_EC_EASI_BASE		0x81400000
+#define IO_EC_IOC4_BASE		0x8009c000
+#define IO_EC_IOC_BASE		0x80090000
+#define IO_EC_MEMC8_BASE	0x8000ac00
+#define IO_EC_MEMC_BASE		0x80000000
+
+#define NETSLOT_BASE		0x0302b000
+#define NETSLOT_SIZE		0x00001000
+
+#define PODSLOT_IOC0_BASE	0x03240000
+#define PODSLOT_IOC4_BASE	0x03270000
+#define PODSLOT_IOC_SIZE	(1 << 14)
+#define PODSLOT_MEMC_BASE	0x03000000
+#define PODSLOT_MEMC_SIZE	(1 << 14)
+#define PODSLOT_EASI_BASE	0x08000000
+#define PODSLOT_EASI_SIZE	(1 << 24)
+
+#define	EXPMASK_STATUS		(EXPMASK_BASE + 0x00)
+#define EXPMASK_ENABLE		(EXPMASK_BASE + 0x04)
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/io.h b/arch/arm/mach-rpc/include/mach/io.h
new file mode 100644
index 000000000000..9f0553b7ec28
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/io.h
@@ -0,0 +1,258 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/io.h
+ *
+ *  Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *  06-Dec-1997	RMK	Created.
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * GCC is totally crap at loading/storing data.  We try to persuade it
+ * to do the right thing by using these whereever possible instead of
+ * the above.
+ */
+#define __arch_base_getb(b,o)			\
+ ({						\
+	unsigned int __v, __r = (b);		\
+	__asm__ __volatile__(			\
+		"ldrb	%0, [%1, %2]"		\
+		: "=r" (__v)			\
+		: "r" (__r), "Ir" (o));		\
+	__v;					\
+ })
+
+#define __arch_base_getl(b,o)			\
+ ({						\
+	unsigned int __v, __r = (b);		\
+	__asm__ __volatile__(			\
+		"ldr	%0, [%1, %2]"		\
+		: "=r" (__v)			\
+		: "r" (__r), "Ir" (o));		\
+	__v;					\
+ })
+
+#define __arch_base_putb(v,b,o)			\
+ ({						\
+	unsigned int __r = (b);			\
+	__asm__ __volatile__(			\
+		"strb	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (__r), "Ir" (o));\
+ })
+
+#define __arch_base_putl(v,b,o)			\
+ ({						\
+	unsigned int __r = (b);			\
+	__asm__ __volatile__(			\
+		"str	%0, [%1, %2]"		\
+		:				\
+		: "r" (v), "r" (__r), "Ir" (o));\
+ })
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
+ * and are translated to the start of IO.  Note that all addresses are
+ * shifted left!
+ */
+#define __PORT_PCIO(x)	(!((x) & 0x80000000))
+
+/*
+ * Dynamic IO functions.
+ */
+static inline void __outb (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"strb	%1, [%0, %2, lsl #2]	@ outb"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outw (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outw"
+	: "=&r" (temp)
+	: "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+static inline void __outl (unsigned int value, unsigned int port)
+{
+	unsigned long temp;
+	__asm__ __volatile__(
+	"tst	%2, #0x80000000\n\t"
+	"mov	%0, %4\n\t"
+	"addeq	%0, %0, %3\n\t"
+	"str	%1, [%0, %2, lsl #2]	@ outl"
+	: "=&r" (temp)
+	: "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)
+	: "cc");
+}
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)					\
+static inline unsigned sz __in##fnsuffix (unsigned int port)		\
+{										\
+	unsigned long temp, value;						\
+	__asm__ __volatile__(							\
+	"tst	%2, #0x80000000\n\t"						\
+	"mov	%0, %4\n\t"							\
+	"addeq	%0, %0, %3\n\t"							\
+	"ldr" instr "	%1, [%0, %2, lsl #2]	@ in" #fnsuffix			\
+	: "=&r" (temp), "=r" (value)						\
+	: "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE)		\
+	: "cc");								\
+	return (unsigned sz)value;						\
+}
+
+static inline void __iomem *__deprecated __ioaddr(unsigned int port)
+{
+	void __iomem *ret;
+	if (__PORT_PCIO(port))
+		ret = PCIO_BASE;
+	else
+		ret = IO_BASE;
+	return ret + (port << 2);
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)	\
+	DECLARE_DYN_IN(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)							\
+({										\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"strb	%0, [%1, %2]	@ outbc"				\
+		: : "r" (value), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inbc(port)								\
+({										\
+	unsigned char result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldrb	%0, [%1, %2]	@ inbc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __outwc(value,port)							\
+({										\
+	unsigned long __v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (__v|__v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2));	\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outwc"				\
+		: : "r" (__v|__v<<16), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inwc(port)								\
+({										\
+	unsigned short result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inwc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result & 0xffff;							\
+})
+
+#define __outlc(value,port)							\
+({										\
+	unsigned long __v = value;						\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (__v), "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"str	%0, [%1, %2]	@ outlc"				\
+		: : "r" (__v), "r" (IO_BASE), "r" ((port) << 2));		\
+})
+
+#define __inlc(port)								\
+({										\
+	unsigned long result;							\
+	if (__PORT_PCIO((port)))						\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2));		\
+	else									\
+		__asm__ __volatile__(						\
+		"ldr	%0, [%1, %2]	@ inlc"					\
+		: "=r" (result) : "r" (IO_BASE), "r" ((port) << 2));		\
+	result;									\
+})
+
+#define __ioaddrc(port)		__ioaddr(port)
+
+#define inb(p)	 	(__builtin_constant_p((p)) ? __inbc(p)    : __inb(p))
+#define inw(p)	 	(__builtin_constant_p((p)) ? __inwc(p)    : __inw(p))
+#define inl(p)	 	(__builtin_constant_p((p)) ? __inlc(p)    : __inl(p))
+#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port)	((unsigned long)__ioaddr((port)))
+
+#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
+
+#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x)	(x)
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/irqs.h b/arch/arm/mach-rpc/include/mach/irqs.h
new file mode 100644
index 000000000000..4ce6ca97f669
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/irqs.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/irqs.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define IRQ_PRINTER		0
+#define IRQ_BATLOW		1
+#define IRQ_FLOPPYINDEX		2
+#define IRQ_VSYNCPULSE		3
+#define IRQ_POWERON		4
+#define IRQ_TIMER0		5
+#define IRQ_TIMER1		6
+#define IRQ_IMMEDIATE		7
+#define IRQ_EXPCARDFIQ		8
+#define IRQ_HARDDISK		9
+#define IRQ_SERIALPORT		10
+#define IRQ_FLOPPYDISK		12
+#define IRQ_EXPANSIONCARD	13
+#define IRQ_KEYBOARDTX		14
+#define IRQ_KEYBOARDRX		15
+
+#define IRQ_DMA0		16
+#define IRQ_DMA1		17
+#define IRQ_DMA2		18
+#define IRQ_DMA3		19
+#define IRQ_DMAS0		20
+#define IRQ_DMAS1		21
+
+#define FIQ_FLOPPYDATA		0
+#define FIQ_ECONET		2
+#define FIQ_SERIALPORT		4
+#define FIQ_EXPANSIONCARD	6
+#define FIQ_FORCE		7
+
+/*
+ * This is the offset of the FIQ "IRQ" numbers
+ */
+#define FIQ_START		64
+
+#define IRQ_TIMER		IRQ_TIMER0
+
diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h
new file mode 100644
index 000000000000..05425d558ee7
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/memory.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/memory.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Changelog:
+ *   20-Oct-1996 RMK	Created
+ *   31-Dec-1997 RMK	Fixed definitions to reduce warnings
+ *   11-Jan-1998 RMK	Uninlined to reduce hits on cache
+ *   08-Feb-1998 RMK	Added __virt_to_bus and __bus_to_virt
+ *   21-Mar-1999 RMK	Renamed to memory.h
+ *		 RMK	Added TASK_SIZE and PAGE_OFFSET
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x10000000)
+
+/*
+ * These are exactly the same on the RiscPC as the
+ * physical memory view.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+/*
+ * Cache flushing area - ROM
+ */
+#define FLUSH_BASE_PHYS		0x00000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
new file mode 100644
index 000000000000..54d6e3f2d319
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/system.h
@@ -0,0 +1,27 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/system.h
+ *
+ *  Copyright (C) 1996-1999 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/iomd.h>
+#include <asm/io.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	iomd_writeb(0, IOMD_ROMCR0);
+
+	/*
+	 * Jump into the ROM
+	 */
+	cpu_reset(0);
+}
diff --git a/arch/arm/mach-rpc/include/mach/timex.h b/arch/arm/mach-rpc/include/mach/timex.h
new file mode 100644
index 000000000000..dd75e7387bbe
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/timex.h
@@ -0,0 +1,17 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/timex.h
+ *
+ *  Copyright (C) 1997, 1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  RiscPC architecture timex specifications
+ */
+
+/*
+ * On the RiscPC, the clock ticks at 2MHz.
+ */
+#define CLOCK_TICK_RATE		2000000
+
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
new file mode 100644
index 000000000000..baa9c866d7bf
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -0,0 +1,198 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/uncompress.h
+ *
+ *  Copyright (C) 1996 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VIDMEM ((char *)SCREEN_START)
+ 
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+
+int video_size_row;
+unsigned char bytes_per_char_h;
+extern unsigned long con_charconvtable[256];
+
+struct param_struct {
+	unsigned long page_size;
+	unsigned long nr_pages;
+	unsigned long ramdisk_size;
+	unsigned long mountrootrdonly;
+	unsigned long rootdev;
+	unsigned long video_num_cols;
+	unsigned long video_num_rows;
+	unsigned long video_x;
+	unsigned long video_y;
+	unsigned long memc_control_reg;
+	unsigned char sounddefault;
+	unsigned char adfsdrives;
+	unsigned char bytes_per_char_h;
+	unsigned char bytes_per_char_v;
+	unsigned long unused[256/4-11];
+};
+
+static const unsigned long palette_4[16] = {
+	0x00000000,
+	0x000000cc,
+	0x0000cc00,             /* Green   */
+	0x0000cccc,             /* Yellow  */
+	0x00cc0000,             /* Blue    */
+	0x00cc00cc,             /* Magenta */
+	0x00cccc00,             /* Cyan    */
+	0x00cccccc,             /* White   */
+	0x00000000,
+	0x000000ff,
+	0x0000ff00,
+	0x0000ffff,
+	0x00ff0000,
+	0x00ff00ff,
+	0x00ffff00,
+	0x00ffffff
+};
+
+#define palette_setpixel(p)	*(unsigned long *)(IO_START+0x00400000) = 0x10000000|((p) & 255)
+#define palette_write(v)	*(unsigned long *)(IO_START+0x00400000) = 0x00000000|((v) & 0x00ffffff)
+
+/*
+ * params_phys is a linker defined symbol - see
+ * arch/arm/boot/compressed/Makefile
+ */
+extern __attribute__((pure)) struct param_struct *params(void);
+#define params (params())
+
+#ifndef STANDALONE_DEBUG 
+static unsigned long video_num_cols;
+static unsigned long video_num_rows;
+static unsigned long video_x;
+static unsigned long video_y;
+static unsigned char bytes_per_char_v;
+static int white;
+
+/*
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+	extern void ll_write_char(char *, char c, char white);
+	int x,y;
+	char *ptr;
+
+	x = video_x;
+	y = video_y;
+
+	if (c == '\n') {
+		if (++y >= video_num_rows)
+			y--;
+	} else if (c == '\r') {
+		x = 0;
+	} else {
+		ptr = VIDMEM + ((y*video_num_cols*bytes_per_char_v+x)*bytes_per_char_h);
+		ll_write_char(ptr, c, white);
+		if (++x >= video_num_cols) {
+			x = 0;
+			if ( ++y >= video_num_rows ) {
+				y--;
+			}
+		}
+	}
+
+	video_x = x;
+	video_y = y;
+}
+
+static inline void flush(void)
+{
+}
+
+static void error(char *x);
+
+/*
+ * Setup for decompression
+ */
+static void arch_decomp_setup(void)
+{
+	int i;
+	struct tag *t = (struct tag *)params;
+	unsigned int nr_pages = 0, page_size = PAGE_SIZE;
+
+	if (t->hdr.tag == ATAG_CORE)
+	{
+		for (; t->hdr.size; t = tag_next(t))
+		{
+			if (t->hdr.tag == ATAG_VIDEOTEXT)
+			{
+				video_num_rows = t->u.videotext.video_lines;
+				video_num_cols = t->u.videotext.video_cols;
+				bytes_per_char_h = t->u.videotext.video_points;
+				bytes_per_char_v = t->u.videotext.video_points;
+				video_x = t->u.videotext.x;
+				video_y = t->u.videotext.y;
+			}
+
+			if (t->hdr.tag == ATAG_MEM)
+			{
+				page_size = PAGE_SIZE;
+				nr_pages += (t->u.mem.size / PAGE_SIZE);
+			}
+		}
+	}
+	else
+	{
+		nr_pages = params->nr_pages;
+		page_size = params->page_size;
+		video_num_rows = params->video_num_rows;
+		video_num_cols = params->video_num_cols;
+		video_x = params->video_x;
+		video_y = params->video_y;
+		bytes_per_char_h = params->bytes_per_char_h;
+		bytes_per_char_v = params->bytes_per_char_v;
+	}
+
+	video_size_row = video_num_cols * bytes_per_char_h;
+	
+	if (bytes_per_char_h == 4)
+		for (i = 0; i < 256; i++)
+			con_charconvtable[i] =
+				(i & 128 ? 1 << 0  : 0) |
+				(i & 64  ? 1 << 4  : 0) |
+				(i & 32  ? 1 << 8  : 0) |
+				(i & 16  ? 1 << 12 : 0) |
+				(i & 8   ? 1 << 16 : 0) |
+				(i & 4   ? 1 << 20 : 0) |
+				(i & 2   ? 1 << 24 : 0) |
+				(i & 1   ? 1 << 28 : 0);
+	else
+		for (i = 0; i < 16; i++)
+			con_charconvtable[i] =
+				(i & 8   ? 1 << 0  : 0) |
+				(i & 4   ? 1 << 8  : 0) |
+				(i & 2   ? 1 << 16 : 0) |
+				(i & 1   ? 1 << 24 : 0);
+
+
+	palette_setpixel(0);
+	if (bytes_per_char_h == 1) {
+		palette_write (0);
+		palette_write (0x00ffffff);
+		for (i = 2; i < 256; i++)
+			palette_write (0);
+		white = 1;
+	} else {
+		for (i = 0; i < 256; i++)
+			palette_write (i < 16 ? palette_4[i] : 0);
+		white = 7;
+	}
+
+	if (nr_pages * page_size < 4096*1024) error("<4M of mem\n");
+}
+#endif
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-rpc/include/mach/vmalloc.h b/arch/arm/mach-rpc/include/mach/vmalloc.h
new file mode 100644
index 000000000000..9a96fd69e705
--- /dev/null
+++ b/arch/arm/mach-rpc/include/mach/vmalloc.h
@@ -0,0 +1,10 @@
+/*
+ *  arch/arm/mach-rpc/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 1997 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x1c000000)
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index eca558c6bf5d..ce8470fea887 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -22,7 +22,7 @@
 #include <asm/elf.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include <asm/domain.h>
 #include <asm/setup.h>
diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c
index 758e160410e9..148d0ddef3e8 100644
--- a/arch/arm/mach-s3c2400/gpio.c
+++ b/arch/arm/mach-s3c2400/gpio.c
@@ -25,11 +25,11 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 int s3c2400_gpio_getirq(unsigned int pin)
 {
diff --git a/arch/arm/mach-s3c2400/include/mach/map.h b/arch/arm/mach-s3c2400/include/mach/map.h
new file mode 100644
index 000000000000..1535540edc82
--- /dev/null
+++ b/arch/arm/mach-s3c2400/include/mach/map.h
@@ -0,0 +1,66 @@
+/* arch/arm/mach-s3c2400/include/mach/map.h
+ *
+ * Copyright 2003,2007  Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Copyright 2003, Lucas Correia Villa Real
+ *
+ * S3C2400 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S3C2400_PA_MEMCTRL	(0x14000000)
+#define S3C2400_PA_USBHOST	(0x14200000)
+#define S3C2400_PA_IRQ		(0x14400000)
+#define S3C2400_PA_DMA		(0x14600000)
+#define S3C2400_PA_CLKPWR	(0x14800000)
+#define S3C2400_PA_LCD		(0x14A00000)
+#define S3C2400_PA_UART		(0x15000000)
+#define S3C2400_PA_TIMER	(0x15100000)
+#define S3C2400_PA_USBDEV	(0x15200140)
+#define S3C2400_PA_WATCHDOG	(0x15300000)
+#define S3C2400_PA_IIC		(0x15400000)
+#define S3C2400_PA_IIS		(0x15508000)
+#define S3C2400_PA_GPIO		(0x15600000)
+#define S3C2400_PA_RTC		(0x15700040)
+#define S3C2400_PA_ADC		(0x15800000)
+#define S3C2400_PA_SPI		(0x15900000)
+
+#define S3C2400_PA_MMC		(0x15A00000)
+#define S3C2400_SZ_MMC		SZ_1M
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C2400_CS0	(0x00000000)
+#define S3C2400_CS1	(0x02000000)
+#define S3C2400_CS2	(0x04000000)
+#define S3C2400_CS3	(0x06000000)
+#define S3C2400_CS4	(0x08000000)
+#define S3C2400_CS5	(0x0A000000)
+#define S3C2400_CS6	(0x0C000000)
+#define S3C2400_CS7	(0x0E000000)
+
+#define S3C2400_SDRAM_PA    (S3C2400_CS6)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ		S3C2400_PA_IRQ
+#define S3C24XX_PA_MEMCTRL	S3C2400_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST	S3C2400_PA_USBHOST
+#define S3C24XX_PA_DMA		S3C2400_PA_DMA
+#define S3C24XX_PA_CLKPWR	S3C2400_PA_CLKPWR
+#define S3C24XX_PA_LCD		S3C2400_PA_LCD
+#define S3C24XX_PA_UART		S3C2400_PA_UART
+#define S3C24XX_PA_TIMER	S3C2400_PA_TIMER
+#define S3C24XX_PA_USBDEV	S3C2400_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG	S3C2400_PA_WATCHDOG
+#define S3C24XX_PA_IIC		S3C2400_PA_IIC
+#define S3C24XX_PA_IIS		S3C2400_PA_IIS
+#define S3C24XX_PA_GPIO		S3C2400_PA_GPIO
+#define S3C24XX_PA_RTC		S3C2400_PA_RTC
+#define S3C24XX_PA_ADC		S3C2400_PA_ADC
+#define S3C24XX_PA_SPI		S3C2400_PA_SPI
diff --git a/arch/arm/mach-s3c2400/include/mach/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h
new file mode 100644
index 000000000000..8f4878e4f591
--- /dev/null
+++ b/arch/arm/mach-s3c2400/include/mach/memory.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-s3c2400/include/mach/memory.h
+ *  from arch/arm/mach-rpc/include/mach/memory.h
+ *
+ *  Copyright 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x0C000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-s3c2410/bast-ide.c b/arch/arm/mach-s3c2410/bast-ide.c
index df95fe37cdc8..298ececfa366 100644
--- a/arch/arm/mach-s3c2410/bast-ide.c
+++ b/arch/arm/mach-s3c2410/bast-ide.c
@@ -24,9 +24,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
+#include <mach/map.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
 
 /* IDE ports */
 
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 76a7cb15f3be..c66021b5fa4d 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -28,15 +28,15 @@
 
 #include <asm/mach-types.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
+#include <mach/regs-irq.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
 
 #include <asm/plat-s3c24xx/irq.h>
 
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index 2bfaa6102025..1322851d1acb 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -34,12 +34,12 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 8f12e855ef5f..8730797749e3 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -18,17 +18,17 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/dma.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 01e795d1146e..c6eefb1d590c 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -26,11 +26,11 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
 			   unsigned int config)
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 3c48886521e7..5a6bc56f186b 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -16,9 +16,9 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/leds.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/hardware.h>
-#include <asm/arch/h1940-latch.h>
+#include <mach/regs-gpio.h>
+#include <mach/hardware.h>
+#include <mach/h1940-latch.h>
 
 #define DRV_NAME              "h1940-bt"
 
diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h b/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
new file mode 100644
index 000000000000..1b614d5a81f3
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
@@ -0,0 +1,25 @@
+/* arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * ANUBIS - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ANUBISCPLD_H
+#define __ASM_ARCH_ANUBISCPLD_H
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define ANUBIS_CTRL1_NANDSEL		(0x3)
+
+/* IDREG - revision */
+
+#define ANUBIS_IDREG_REVMASK		(0x7)
+
+#endif /* __ASM_ARCH_ANUBISCPLD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-irq.h b/arch/arm/mach-s3c2410/include/mach/anubis-irq.h
new file mode 100644
index 000000000000..a2a328134e34
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-irq.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s3c2410/include/mach/anubis-irq.h
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  ANUBIS - IRQ Number definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ANUBISIRQ_H
+#define __ASM_ARCH_ANUBISIRQ_H
+
+#define IRQ_IDE0       IRQ_EINT2
+#define IRQ_IDE1       IRQ_EINT3
+#define IRQ_ASIX       IRQ_EINT1
+
+#endif /* __ASM_ARCH_ANUBISIRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/anubis-map.h b/arch/arm/mach-s3c2410/include/mach/anubis-map.h
new file mode 100644
index 000000000000..c9deb3a5b2c3
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/anubis-map.h
@@ -0,0 +1,38 @@
+/* arch/arm/mach-s3c2410/include/mach/anubis-map.h
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * ANUBIS - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+#ifndef __ASM_ARCH_ANUBISMAP_H
+#define __ASM_ARCH_ANUBISMAP_H
+
+/* start peripherals off after the S3C2410 */
+
+#define ANUBIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x01800000))
+
+#define ANUBIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define ANUBIS_VA_CTRL1	    ANUBIS_IOADDR(0x00000000)	 /* 0x01800000 */
+#define ANUBIS_PA_CTRL1	    (ANUBIS_PA_CPLD)
+
+#define ANUBIS_VA_IDREG	    ANUBIS_IOADDR(0x00300000)	 /* 0x01B00000 */
+#define ANUBIS_PA_IDREG	    (ANUBIS_PA_CPLD + (3<<23))
+
+#define ANUBIS_IDEPRI	    ANUBIS_IOADDR(0x01000000)
+#define ANUBIS_IDEPRIAUX    ANUBIS_IOADDR(0x01100000)
+#define ANUBIS_IDESEC	    ANUBIS_IOADDR(0x01200000)
+#define ANUBIS_IDESECAUX    ANUBIS_IOADDR(0x01300000)
+
+#endif /* __ASM_ARCH_ANUBISMAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/audio.h b/arch/arm/mach-s3c2410/include/mach/audio.h
new file mode 100644
index 000000000000..de0e8da48bc3
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/audio.h
@@ -0,0 +1,45 @@
+/* arch/arm/mach-s3c2410/include/mach/audio.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - Audio platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_AUDIO_H
+#define __ASM_ARCH_AUDIO_H __FILE__
+
+/* struct s3c24xx_iis_ops
+ *
+ * called from the s3c24xx audio core to deal with the architecture
+ * or the codec's setup and control.
+ *
+ * the pointer to itself is passed through in case the caller wants to
+ * embed this in an larger structure for easy reference to it's context.
+*/
+
+struct s3c24xx_iis_ops {
+	struct module *owner;
+
+	int	(*startup)(struct s3c24xx_iis_ops *me);
+	void	(*shutdown)(struct s3c24xx_iis_ops *me);
+	int	(*suspend)(struct s3c24xx_iis_ops *me);
+	int	(*resume)(struct s3c24xx_iis_ops *me);
+
+	int	(*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
+	int	(*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
+	int	(*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt);
+};
+
+struct s3c24xx_platdata_iis {
+	const char		*codec_clk;
+	struct s3c24xx_iis_ops	*ops;
+	int			(*match_dev)(struct device *dev);
+};
+
+#endif /* __ASM_ARCH_AUDIO_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
new file mode 100644
index 000000000000..20493b048360
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
@@ -0,0 +1,53 @@
+/* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * BAST - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_BASTCPLD_H
+#define __ASM_ARCH_BASTCPLD_H
+
+/* CTRL1 - Audio LR routing */
+
+#define BAST_CPLD_CTRL1_LRCOFF	    (0x00)
+#define BAST_CPLD_CTRL1_LRCADC	    (0x01)
+#define BAST_CPLD_CTRL1_LRCDAC	    (0x02)
+#define BAST_CPLD_CTRL1_LRCARM	    (0x03)
+#define BAST_CPLD_CTRL1_LRMASK	    (0x03)
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define BAST_CPLD_CTRL2_WNAND       (0x04)
+#define BAST_CPLD_CTLR2_IDERST      (0x08)
+
+/* CTRL3 - rom write control, CPLD identity */
+
+#define BAST_CPLD_CTRL3_IDMASK      (0x0e)
+#define BAST_CPLD_CTRL3_ROMWEN      (0x01)
+
+/* CTRL4 - 8bit LCD interface control/status */
+
+#define BAST_CPLD_CTRL4_LLAT	    (0x01)
+#define BAST_CPLD_CTRL4_LCDRW	    (0x02)
+#define BAST_CPLD_CTRL4_LCDCMD	    (0x04)
+#define BAST_CPLD_CTRL4_LCDE2	    (0x01)
+
+/* CTRL5 - DMA routing */
+
+#define BAST_CPLD_DMA0_PRIIDE      (0<<0)
+#define BAST_CPLD_DMA0_SECIDE      (1<<0)
+#define BAST_CPLD_DMA0_ISA15       (2<<0)
+#define BAST_CPLD_DMA0_ISA36       (3<<0)
+
+#define BAST_CPLD_DMA1_PRIIDE      (0<<2)
+#define BAST_CPLD_DMA1_SECIDE      (1<<2)
+#define BAST_CPLD_DMA1_ISA15       (2<<2)
+#define BAST_CPLD_DMA1_ISA36       (3<<2)
+
+#endif /* __ASM_ARCH_BASTCPLD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-irq.h b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
new file mode 100644
index 000000000000..501c202b53cf
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
@@ -0,0 +1,29 @@
+/* arch/arm/mach-s3c2410/include/mach/bast-irq.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine BAST - IRQ Number definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_BASTIRQ_H
+#define __ASM_ARCH_BASTIRQ_H
+
+/* irq numbers to onboard peripherals */
+
+#define IRQ_USBOC      IRQ_EINT18
+#define IRQ_IDE0       IRQ_EINT16
+#define IRQ_IDE1       IRQ_EINT17
+#define IRQ_PCSERIAL1  IRQ_EINT15
+#define IRQ_PCSERIAL2  IRQ_EINT14
+#define IRQ_PCPARALLEL IRQ_EINT13
+#define IRQ_ASIX       IRQ_EINT11
+#define IRQ_DM9000     IRQ_EINT10
+#define IRQ_ISA	       IRQ_EINT9
+#define IRQ_SMALERT    IRQ_EINT8
+
+#endif /* __ASM_ARCH_BASTIRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-map.h b/arch/arm/mach-s3c2410/include/mach/bast-map.h
new file mode 100644
index 000000000000..c2c5baf07345
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/bast-map.h
@@ -0,0 +1,146 @@
+/* arch/arm/mach-s3c2410/include/mach/bast-map.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine BAST - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#ifndef __ASM_ARCH_BASTMAP_H
+#define __ASM_ARCH_BASTMAP_H
+
+#define BAST_IOADDR(x)	   (S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define BAST_VA_CTRL1	    BAST_IOADDR(0x00000000)	 /* 0x01300000 */
+#define BAST_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
+
+#define BAST_VA_CTRL2	    BAST_IOADDR(0x00100000)	 /* 0x01400000 */
+#define BAST_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
+
+#define BAST_VA_CTRL3	    BAST_IOADDR(0x00200000)	 /* 0x01500000 */
+#define BAST_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
+
+#define BAST_VA_CTRL4	    BAST_IOADDR(0x00300000)	 /* 0x01600000 */
+#define BAST_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define BAST_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define BAST_VA_PC104_IRQREQ  BAST_IOADDR(0x00400000)
+
+#define BAST_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define BAST_VA_PC104_IRQRAW  BAST_IOADDR(0x00500000)
+
+#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
+
+#define BAST_PA_LCD_RCMD1     (0x8800000)
+#define BAST_VA_LCD_RCMD1     BAST_IOADDR(0x00700000)
+
+#define BAST_PA_LCD_WCMD1     (0x8000000)
+#define BAST_VA_LCD_WCMD1     BAST_IOADDR(0x00800000)
+
+#define BAST_PA_LCD_RDATA1    (0x9800000)
+#define BAST_VA_LCD_RDATA1    BAST_IOADDR(0x00900000)
+
+#define BAST_PA_LCD_WDATA1    (0x9000000)
+#define BAST_VA_LCD_WDATA1    BAST_IOADDR(0x00A00000)
+
+#define BAST_PA_LCD_RCMD2     (0xA800000)
+#define BAST_VA_LCD_RCMD2     BAST_IOADDR(0x00B00000)
+
+#define BAST_PA_LCD_WCMD2     (0xA000000)
+#define BAST_VA_LCD_WCMD2     BAST_IOADDR(0x00C00000)
+
+#define BAST_PA_LCD_RDATA2    (0xB800000)
+#define BAST_VA_LCD_RDATA2    BAST_IOADDR(0x00D00000)
+
+#define BAST_PA_LCD_WDATA2    (0xB000000)
+#define BAST_VA_LCD_WDATA2    BAST_IOADDR(0x00E00000)
+
+
+/* 0xE0000000 contains the IO space that is split by speed and
+ * wether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000  8bit,  slow
+ * 0x04000000 to 0x08000000  16bit, slow
+ * 0x08000000 to 0x0C000000  16bit, net
+ * 0x0C000000 to 0x10000000  16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x00000000 to 0x01000000 16MB ISA IO space
+ * 0x01000000 to 0x02000000 16MB ISA memory space
+ * 0x02000000 to 0x02100000 1MB  IDE primary channel
+ * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB  IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
+ * 0x02400000 to 0x02500000 1MB  ASIX ethernet controller
+ * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controller
+ * 0x02600000 to 0x02700000 1MB  PC SuperIO controller
+ *
+ * the phyiscal layout of the zones are:
+ *  nGCS2 - 8bit, slow
+ *  nGCS3 - 16bit, slow
+ *  nGCS4 - 16bit, net
+ *  nGCS5 - 16bit, fast
+ */
+
+#define BAST_VA_MULTISPACE (0xE0000000)
+
+#define BAST_VA_ISAIO	   (BAST_VA_MULTISPACE + 0x00000000)
+#define BAST_VA_ISAMEM	   (BAST_VA_MULTISPACE + 0x01000000)
+#define BAST_VA_IDEPRI	   (BAST_VA_MULTISPACE + 0x02000000)
+#define BAST_VA_IDEPRIAUX  (BAST_VA_MULTISPACE + 0x02100000)
+#define BAST_VA_IDESEC	   (BAST_VA_MULTISPACE + 0x02200000)
+#define BAST_VA_IDESECAUX  (BAST_VA_MULTISPACE + 0x02300000)
+#define BAST_VA_ASIXNET	   (BAST_VA_MULTISPACE + 0x02400000)
+#define BAST_VA_DM9000	   (BAST_VA_MULTISPACE + 0x02500000)
+#define BAST_VA_SUPERIO	   (BAST_VA_MULTISPACE + 0x02600000)
+
+#define BAST_VA_MULTISPACE (0xE0000000)
+
+#define BAST_VAM_CS2 (0x00000000)
+#define BAST_VAM_CS3 (0x04000000)
+#define BAST_VAM_CS4 (0x08000000)
+#define BAST_VAM_CS5 (0x0C000000)
+
+/* physical offset addresses for the peripherals */
+
+#define BAST_PA_ISAIO	  (0x00000000)
+#define BAST_PA_ASIXNET	  (0x01000000)
+#define BAST_PA_SUPERIO	  (0x01800000)
+#define BAST_PA_IDEPRI	  (0x02000000)
+#define BAST_PA_IDEPRIAUX (0x02800000)
+#define BAST_PA_IDESEC	  (0x03000000)
+#define BAST_PA_IDESECAUX (0x03800000)
+#define BAST_PA_ISAMEM	  (0x04000000)
+#define BAST_PA_DM9000	  (0x05000000)
+
+/* some configurations for the peripherals */
+
+#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
+/*  */
+
+#define BAST_ASIXNET_CS  BAST_VAM_CS5
+#define BAST_IDE_CS	 BAST_VAM_CS5
+#define BAST_DM9000_CS	 BAST_VAM_CS4
+
+#endif /* __ASM_ARCH_BASTMAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
new file mode 100644
index 000000000000..61684cb8ce59
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
@@ -0,0 +1,40 @@
+/* arch/arm/mach-s3c2410/include/mach/bast-pmu.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	Vincent Sanders <vince@simtec.co.uk>
+ *
+ * Machine BAST - Power Management chip
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_BASTPMU_H
+#define __ASM_ARCH_BASTPMU_H "08_OCT_2004"
+
+#define BASTPMU_REG_IDENT	(0x00)
+#define BASTPMU_REG_VERSION	(0x01)
+#define BASTPMU_REG_DDCCTRL	(0x02)
+#define BASTPMU_REG_POWER	(0x03)
+#define BASTPMU_REG_RESET	(0x04)
+#define BASTPMU_REG_GWO		(0x05)
+#define BASTPMU_REG_WOL		(0x06)
+#define BASTPMU_REG_WOR		(0x07)
+#define BASTPMU_REG_UID		(0x09)
+
+#define BASTPMU_EEPROM		(0xC0)
+
+#define BASTPMU_EEP_UID		(BASTPMU_EEPROM + 0)
+#define BASTPMU_EEP_WOL		(BASTPMU_EEPROM + 8)
+#define BASTPMU_EEP_WOR		(BASTPMU_EEPROM + 9)
+
+#define BASTPMU_IDENT_0		0x53
+#define BASTPMU_IDENT_1		0x42
+#define BASTPMU_IDENT_2		0x50
+#define BASTPMU_IDENT_3		0x4d
+
+#define BASTPMU_RESET_GUARD	(0x55)
+
+#endif /* __ASM_ARCH_BASTPMU_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
new file mode 100644
index 000000000000..682df23087ab
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -0,0 +1,102 @@
+/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Copyright (C) 2005 Simtec Electronics
+ *
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <asm/plat-s3c/regs-serial.h>
+
+#define S3C2410_UART1_OFF (0x4000)
+#define SHIFT_2440TXF (14-9)
+
+	.macro addruart, rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1
+		ldreq	\rx, = S3C24XX_PA_UART
+		ldrne	\rx, = S3C24XX_VA_UART
+#if CONFIG_DEBUG_S3C_UART != 0
+		add	\rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
+#endif
+	.endm
+
+	.macro fifo_full_s3c24xx rd, rx
+		@ check for arm920 vs arm926. currently assume all arm926
+		@ devices have an 64 byte FIFO identical to the s3c2440
+		mrc	p15, 0, \rd, c0, c0
+		and	\rd, \rd, #0xff0
+		teq	\rd, #0x260
+		beq	1004f
+		mrc	p15, 0, \rd, c1, c0
+		tst	\rd, #1
+		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
+		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
+		bic	\rd, \rd, #0xff000
+		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		and	\rd, \rd, #0x00ff0000
+		teq	\rd, #0x00440000		@ is it 2440?
+1004:
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		moveq	\rd, \rd, lsr #SHIFT_2440TXF
+		tst	\rd, #S3C2410_UFSTAT_TXFULL
+	.endm
+
+	.macro  fifo_full_s3c2410 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		tst	\rd, #S3C2410_UFSTAT_TXFULL
+	.endm
+
+/* fifo level reading */
+
+	.macro fifo_level_s3c24xx rd, rx
+		@ check for arm920 vs arm926. currently assume all arm926
+		@ devices have an 64 byte FIFO identical to the s3c2440
+		mrc	p15, 0, \rd, c0, c0
+		and	\rd, \rd, #0xff0
+		teq	\rd, #0x260
+		beq	10000f
+		mrc	p15, 0, \rd, c1, c0
+		tst	\rd, #1
+		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
+		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
+		bic	\rd, \rd, #0xff000
+		ldr	\rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
+		and	\rd, \rd, #0x00ff0000
+		teq	\rd, #0x00440000		@ is it 2440?
+
+10000:
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK
+		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK
+	.endm
+
+	.macro fifo_level_s3c2410 rd, rx
+		ldr	\rd, [ \rx, # S3C2410_UFSTAT ]
+		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
+	.endm
+
+/* Select the correct implementation depending on the configuration. The
+ * S3C2440 will get selected by default, as these are the most widely
+ * used variants of these
+*/
+
+#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
+#define fifo_full  fifo_full_s3c2410
+#define fifo_level fifo_level_s3c2410
+#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
+#define fifo_full  fifo_full_s3c24xx
+#define fifo_level fifo_level_s3c24xx
+#endif
+
+/* include the reset of the code which will do the work */
+
+#include <asm/plat-s3c/debug-macro.S>
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
new file mode 100644
index 000000000000..891b53cd69b8
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -0,0 +1,453 @@
+/* arch/arm/mach-s3c2410/include/mach/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C241XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H __FILE__
+
+#include <linux/sysdev.h>
+#include <mach/hardware.h>
+
+/*
+ * This is the maximum DMA address(physical address) that can be DMAd to.
+ *
+ */
+#define MAX_DMA_ADDRESS		0x40000000
+#define MAX_DMA_TRANSFER_SIZE   0x100000 /* Data Unit is half word  */
+
+/* We use `virtual` dma channels to hide the fact we have only a limited
+ * number of DMA channels, and not of all of them (dependant on the device)
+ * can be attached to any DMA source. We therefore let the DMA core handle
+ * the allocation of hardware channels to clients.
+*/
+
+enum dma_ch {
+	DMACH_XD0,
+	DMACH_XD1,
+	DMACH_SDI,
+	DMACH_SPI0,
+	DMACH_SPI1,
+	DMACH_UART0,
+	DMACH_UART1,
+	DMACH_UART2,
+	DMACH_TIMER,
+	DMACH_I2S_IN,
+	DMACH_I2S_OUT,
+	DMACH_PCM_IN,
+	DMACH_PCM_OUT,
+	DMACH_MIC_IN,
+	DMACH_USB_EP1,
+	DMACH_USB_EP2,
+	DMACH_USB_EP3,
+	DMACH_USB_EP4,
+	DMACH_UART0_SRC2,	/* s3c2412 second uart sources */
+	DMACH_UART1_SRC2,
+	DMACH_UART2_SRC2,
+	DMACH_UART3,		/* s3c2443 has extra uart */
+	DMACH_UART3_SRC2,
+	DMACH_MAX,		/* the end entry */
+};
+
+#define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
+
+/* we have 4 dma channels */
+#ifndef CONFIG_CPU_S3C2443
+#define S3C2410_DMA_CHANNELS		(4)
+#else
+#define S3C2410_DMA_CHANNELS		(6)
+#endif
+
+/* types */
+
+enum s3c2410_dma_state {
+	S3C2410_DMA_IDLE,
+	S3C2410_DMA_RUNNING,
+	S3C2410_DMA_PAUSED
+};
+
+
+/* enum s3c2410_dma_loadst
+ *
+ * This represents the state of the DMA engine, wrt to the loaded / running
+ * transfers. Since we don't have any way of knowing exactly the state of
+ * the DMA transfers, we need to know the state to make decisions on wether
+ * we can
+ *
+ * S3C2410_DMA_NONE
+ *
+ * There are no buffers loaded (the channel should be inactive)
+ *
+ * S3C2410_DMA_1LOADED
+ *
+ * There is one buffer loaded, however it has not been confirmed to be
+ * loaded by the DMA engine. This may be because the channel is not
+ * yet running, or the DMA driver decided that it was too costly to
+ * sit and wait for it to happen.
+ *
+ * S3C2410_DMA_1RUNNING
+ *
+ * The buffer has been confirmed running, and not finisged
+ *
+ * S3C2410_DMA_1LOADED_1RUNNING
+ *
+ * There is a buffer waiting to be loaded by the DMA engine, and one
+ * currently running.
+*/
+
+enum s3c2410_dma_loadst {
+	S3C2410_DMALOAD_NONE,
+	S3C2410_DMALOAD_1LOADED,
+	S3C2410_DMALOAD_1RUNNING,
+	S3C2410_DMALOAD_1LOADED_1RUNNING,
+};
+
+enum s3c2410_dma_buffresult {
+	S3C2410_RES_OK,
+	S3C2410_RES_ERR,
+	S3C2410_RES_ABORT
+};
+
+enum s3c2410_dmasrc {
+	S3C2410_DMASRC_HW,		/* source is memory */
+	S3C2410_DMASRC_MEM		/* source is hardware */
+};
+
+/* enum s3c2410_chan_op
+ *
+ * operation codes passed to the DMA code by the user, and also used
+ * to inform the current channel owner of any changes to the system state
+*/
+
+enum s3c2410_chan_op {
+	S3C2410_DMAOP_START,
+	S3C2410_DMAOP_STOP,
+	S3C2410_DMAOP_PAUSE,
+	S3C2410_DMAOP_RESUME,
+	S3C2410_DMAOP_FLUSH,
+	S3C2410_DMAOP_TIMEOUT,		/* internal signal to handler */
+	S3C2410_DMAOP_STARTED,		/* indicate channel started */
+};
+
+/* flags */
+
+#define S3C2410_DMAF_SLOW         (1<<0)   /* slow, so don't worry about
+					    * waiting for reloads */
+#define S3C2410_DMAF_AUTOSTART    (1<<1)   /* auto-start if buffer queued */
+
+/* dma buffer */
+
+struct s3c2410_dma_client {
+	char                *name;
+};
+
+/* s3c2410_dma_buf_s
+ *
+ * internally used buffer structure to describe a queued or running
+ * buffer.
+*/
+
+struct s3c2410_dma_buf;
+struct s3c2410_dma_buf {
+	struct s3c2410_dma_buf	*next;
+	int			 magic;		/* magic */
+	int			 size;		/* buffer size in bytes */
+	dma_addr_t		 data;		/* start of DMA data */
+	dma_addr_t		 ptr;		/* where the DMA got to [1] */
+	void			*id;		/* client's id */
+};
+
+/* [1] is this updated for both recv/send modes? */
+
+struct s3c2410_dma_chan;
+
+/* s3c2410_dma_cbfn_t
+ *
+ * buffer callback routine type
+*/
+
+typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+				   void *buf, int size,
+				   enum s3c2410_dma_buffresult result);
+
+typedef int  (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+				   enum s3c2410_chan_op );
+
+struct s3c2410_dma_stats {
+	unsigned long		loads;
+	unsigned long		timeout_longest;
+	unsigned long		timeout_shortest;
+	unsigned long		timeout_avg;
+	unsigned long		timeout_failed;
+};
+
+struct s3c2410_dma_map;
+
+/* struct s3c2410_dma_chan
+ *
+ * full state information for each DMA channel
+*/
+
+struct s3c2410_dma_chan {
+	/* channel state flags and information */
+	unsigned char		 number;      /* number of this dma channel */
+	unsigned char		 in_use;      /* channel allocated */
+	unsigned char		 irq_claimed; /* irq claimed for channel */
+	unsigned char		 irq_enabled; /* irq enabled for channel */
+	unsigned char		 xfer_unit;   /* size of an transfer */
+
+	/* channel state */
+
+	enum s3c2410_dma_state	 state;
+	enum s3c2410_dma_loadst	 load_state;
+	struct s3c2410_dma_client *client;
+
+	/* channel configuration */
+	enum s3c2410_dmasrc	 source;
+	unsigned long		 dev_addr;
+	unsigned long		 load_timeout;
+	unsigned int		 flags;		/* channel flags */
+	unsigned int		 hw_cfg;	/* last hw config */
+
+	struct s3c24xx_dma_map	*map;		/* channel hw maps */
+
+	/* channel's hardware position and configuration */
+	void __iomem		*regs;		/* channels registers */
+	void __iomem		*addr_reg;	/* data address register */
+	unsigned int		 irq;		/* channel irq */
+	unsigned long		 dcon;		/* default value of DCON */
+
+	/* driver handles */
+	s3c2410_dma_cbfn_t	 callback_fn;	/* buffer done callback */
+	s3c2410_dma_opfn_t	 op_fn;		/* channel op callback */
+
+	/* stats gathering */
+	struct s3c2410_dma_stats *stats;
+	struct s3c2410_dma_stats  stats_store;
+
+	/* buffer list and information */
+	struct s3c2410_dma_buf	*curr;		/* current dma buffer */
+	struct s3c2410_dma_buf	*next;		/* next buffer to load */
+	struct s3c2410_dma_buf	*end;		/* end of queue */
+
+	/* system device */
+	struct sys_device	dev;
+};
+
+/* the currently allocated channel information */
+extern struct s3c2410_dma_chan s3c2410_chans[];
+
+/* note, we don't really use dma_device_t at the moment */
+typedef unsigned long dma_device_t;
+
+/* functions --------------------------------------------------------------- */
+
+/* s3c2410_dma_request
+ *
+ * request a dma channel exclusivley
+*/
+
+extern int s3c2410_dma_request(dmach_t channel,
+			       struct s3c2410_dma_client *, void *dev);
+
+
+/* s3c2410_dma_ctrl
+ *
+ * change the state of the dma channel
+*/
+
+extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op);
+
+/* s3c2410_dma_setflags
+ *
+ * set the channel's flags to a given state
+*/
+
+extern int s3c2410_dma_setflags(dmach_t channel,
+				unsigned int flags);
+
+/* s3c2410_dma_free
+ *
+ * free the dma channel (will also abort any outstanding operations)
+*/
+
+extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *);
+
+/* s3c2410_dma_enqueue
+ *
+ * place the given buffer onto the queue of operations for the channel.
+ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+ * drained before the buffer is given to the DMA system.
+*/
+
+extern int s3c2410_dma_enqueue(dmach_t channel, void *id,
+			       dma_addr_t data, int size);
+
+/* s3c2410_dma_config
+ *
+ * configure the dma channel
+*/
+
+extern int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the device we're talking to
+*/
+
+extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
+				 int hwcfg, unsigned long devaddr);
+
+/* s3c2410_dma_getposition
+ *
+ * get the position that the dma transfer is currently at
+*/
+
+extern int s3c2410_dma_getposition(dmach_t channel,
+				   dma_addr_t *src, dma_addr_t *dest);
+
+extern int s3c2410_dma_set_opfn(dmach_t, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
+
+/* DMA Register definitions */
+
+#define S3C2410_DMA_DISRC       (0x00)
+#define S3C2410_DMA_DISRCC      (0x04)
+#define S3C2410_DMA_DIDST       (0x08)
+#define S3C2410_DMA_DIDSTC      (0x0C)
+#define S3C2410_DMA_DCON        (0x10)
+#define S3C2410_DMA_DSTAT       (0x14)
+#define S3C2410_DMA_DCSRC       (0x18)
+#define S3C2410_DMA_DCDST       (0x1C)
+#define S3C2410_DMA_DMASKTRIG   (0x20)
+#define S3C2412_DMA_DMAREQSEL	(0x24)
+#define S3C2443_DMA_DMAREQSEL	(0x24)
+
+#define S3C2410_DISRCC_INC	(1<<0)
+#define S3C2410_DISRCC_APB	(1<<1)
+
+#define S3C2410_DMASKTRIG_STOP   (1<<2)
+#define S3C2410_DMASKTRIG_ON     (1<<1)
+#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
+
+#define S3C2410_DCON_DEMAND     (0<<31)
+#define S3C2410_DCON_HANDSHAKE  (1<<31)
+#define S3C2410_DCON_SYNC_PCLK  (0<<30)
+#define S3C2410_DCON_SYNC_HCLK  (1<<30)
+
+#define S3C2410_DCON_INTREQ     (1<<29)
+
+#define S3C2410_DCON_CH0_XDREQ0	(0<<24)
+#define S3C2410_DCON_CH0_UART0	(1<<24)
+#define S3C2410_DCON_CH0_SDI	(2<<24)
+#define S3C2410_DCON_CH0_TIMER	(3<<24)
+#define S3C2410_DCON_CH0_USBEP1	(4<<24)
+
+#define S3C2410_DCON_CH1_XDREQ1	(0<<24)
+#define S3C2410_DCON_CH1_UART1	(1<<24)
+#define S3C2410_DCON_CH1_I2SSDI	(2<<24)
+#define S3C2410_DCON_CH1_SPI	(3<<24)
+#define S3C2410_DCON_CH1_USBEP2	(4<<24)
+
+#define S3C2410_DCON_CH2_I2SSDO	(0<<24)
+#define S3C2410_DCON_CH2_I2SSDI	(1<<24)
+#define S3C2410_DCON_CH2_SDI	(2<<24)
+#define S3C2410_DCON_CH2_TIMER	(3<<24)
+#define S3C2410_DCON_CH2_USBEP3	(4<<24)
+
+#define S3C2410_DCON_CH3_UART2	(0<<24)
+#define S3C2410_DCON_CH3_SDI	(1<<24)
+#define S3C2410_DCON_CH3_SPI	(2<<24)
+#define S3C2410_DCON_CH3_TIMER	(3<<24)
+#define S3C2410_DCON_CH3_USBEP4	(4<<24)
+
+#define S3C2410_DCON_SRCSHIFT   (24)
+#define S3C2410_DCON_SRCMASK	(7<<24)
+
+#define S3C2410_DCON_BYTE       (0<<20)
+#define S3C2410_DCON_HALFWORD   (1<<20)
+#define S3C2410_DCON_WORD       (2<<20)
+
+#define S3C2410_DCON_AUTORELOAD (0<<22)
+#define S3C2410_DCON_NORELOAD   (1<<22)
+#define S3C2410_DCON_HWTRIG     (1<<23)
+
+#ifdef CONFIG_CPU_S3C2440
+#define S3C2440_DIDSTC_CHKINT	(1<<2)
+
+#define S3C2440_DCON_CH0_I2SSDO	(5<<24)
+#define S3C2440_DCON_CH0_PCMIN	(6<<24)
+
+#define S3C2440_DCON_CH1_PCMOUT	(5<<24)
+#define S3C2440_DCON_CH1_SDI	(6<<24)
+
+#define S3C2440_DCON_CH2_PCMIN	(5<<24)
+#define S3C2440_DCON_CH2_MICIN	(6<<24)
+
+#define S3C2440_DCON_CH3_MICIN	(5<<24)
+#define S3C2440_DCON_CH3_PCMOUT	(6<<24)
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+
+#define S3C2412_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2412_DMAREQSEL_HW		(1)
+
+#define S3C2412_DMAREQSEL_SPI0TX	S3C2412_DMAREQSEL_SRC(0)
+#define S3C2412_DMAREQSEL_SPI0RX	S3C2412_DMAREQSEL_SRC(1)
+#define S3C2412_DMAREQSEL_SPI1TX	S3C2412_DMAREQSEL_SRC(2)
+#define S3C2412_DMAREQSEL_SPI1RX	S3C2412_DMAREQSEL_SRC(3)
+#define S3C2412_DMAREQSEL_I2STX		S3C2412_DMAREQSEL_SRC(4)
+#define S3C2412_DMAREQSEL_I2SRX		S3C2412_DMAREQSEL_SRC(5)
+#define S3C2412_DMAREQSEL_TIMER		S3C2412_DMAREQSEL_SRC(9)
+#define S3C2412_DMAREQSEL_SDI		S3C2412_DMAREQSEL_SRC(10)
+#define S3C2412_DMAREQSEL_USBEP1	S3C2412_DMAREQSEL_SRC(13)
+#define S3C2412_DMAREQSEL_USBEP2	S3C2412_DMAREQSEL_SRC(14)
+#define S3C2412_DMAREQSEL_USBEP3	S3C2412_DMAREQSEL_SRC(15)
+#define S3C2412_DMAREQSEL_USBEP4	S3C2412_DMAREQSEL_SRC(16)
+#define S3C2412_DMAREQSEL_XDREQ0	S3C2412_DMAREQSEL_SRC(17)
+#define S3C2412_DMAREQSEL_XDREQ1	S3C2412_DMAREQSEL_SRC(18)
+#define S3C2412_DMAREQSEL_UART0_0	S3C2412_DMAREQSEL_SRC(19)
+#define S3C2412_DMAREQSEL_UART0_1	S3C2412_DMAREQSEL_SRC(20)
+#define S3C2412_DMAREQSEL_UART1_0	S3C2412_DMAREQSEL_SRC(21)
+#define S3C2412_DMAREQSEL_UART1_1	S3C2412_DMAREQSEL_SRC(22)
+#define S3C2412_DMAREQSEL_UART2_0	S3C2412_DMAREQSEL_SRC(23)
+#define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
+
+#endif
+
+#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2443_DMAREQSEL_HW		(1)
+
+#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/entry-macro.S b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
new file mode 100644
index 000000000000..473b3cd37d9b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-s3c2410/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for S3C2410-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+*/
+
+/* We have a problem that the INTOFFSET register does not always
+ * show one interrupt. Occasionally we get two interrupts through
+ * the prioritiser, and this causes the INTOFFSET register to show
+ * what looks like the logical-or of the two interrupt numbers.
+ *
+ * Thanks to Klaus, Shannon, et al for helping to debug this problem
+*/
+
+#define INTPND		(0x10)
+#define INTOFFSET	(0x14)
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+	.macro  get_irqnr_preamble, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		mov	\base, #S3C24XX_VA_IRQ
+
+		@@ try the interrupt offset register, since it is there
+
+		ldr	\irqstat, [ \base, #INTPND ]
+		teq	\irqstat, #0
+		beq	1002f
+		ldr	\irqnr, [ \base, #INTOFFSET ]
+		mov	\tmp, #1
+		tst	\irqstat, \tmp, lsl \irqnr
+		bne	1001f
+
+		@@ the number specified is not a valid irq, so try
+		@@ and work it out for ourselves
+
+		mov	\irqnr, #0		@@ start here
+
+		@@ work out which irq (if any) we got
+
+		movs	\tmp, \irqstat, lsl#16
+		addeq	\irqnr, \irqnr, #16
+		moveq	\irqstat, \irqstat, lsr#16
+		tst	\irqstat, #0xff
+		addeq	\irqnr, \irqnr, #8
+		moveq	\irqstat, \irqstat, lsr#8
+		tst	\irqstat, #0xf
+		addeq	\irqnr, \irqnr, #4
+		moveq	\irqstat, \irqstat, lsr#4
+		tst	\irqstat, #0x3
+		addeq	\irqnr, \irqnr, #2
+		moveq	\irqstat, \irqstat, lsr#2
+		tst	\irqstat, #0x1
+		addeq	\irqnr, \irqnr, #1
+
+		@@ we have the value
+1001:
+		adds	\irqnr, \irqnr, #IRQ_EINT0
+1002:
+		@@ exit here, Z flag unset if IRQ
+
+	.endm
+
+		/* currently don't need an disable_fiq macro */
+
+		.macro	disable_fiq
+		.endm
diff --git a/arch/arm/mach-s3c2410/include/mach/fb.h b/arch/arm/mach-s3c2410/include/mach/fb.h
new file mode 100644
index 000000000000..eee0654eb8fb
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/fb.h
@@ -0,0 +1,74 @@
+/* arch/arm/mach-s3c2410/include/mach/fb.h
+ *
+ * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * Inspired by pxafb.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_FB_H
+#define __ASM_ARM_FB_H
+
+#include <mach/regs-lcd.h>
+
+struct s3c2410fb_hw {
+	unsigned long	lcdcon1;
+	unsigned long	lcdcon2;
+	unsigned long	lcdcon3;
+	unsigned long	lcdcon4;
+	unsigned long	lcdcon5;
+};
+
+/* LCD description */
+struct s3c2410fb_display {
+	/* LCD type */
+	unsigned type;
+
+	/* Screen size */
+	unsigned short width;
+	unsigned short height;
+
+	/* Screen info */
+	unsigned short xres;
+	unsigned short yres;
+	unsigned short bpp;
+
+	unsigned pixclock;		/* pixclock in picoseconds */
+	unsigned short left_margin;  /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short right_margin; /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short hsync_len;    /* value in pixels (TFT) or HCLKs (STN) */
+	unsigned short upper_margin;	/* value in lines (TFT) or 0 (STN) */
+	unsigned short lower_margin;	/* value in lines (TFT) or 0 (STN) */
+	unsigned short vsync_len;	/* value in lines (TFT) or 0 (STN) */
+
+	/* lcd configuration registers */
+	unsigned long	lcdcon5;
+};
+
+struct s3c2410fb_mach_info {
+
+	struct s3c2410fb_display *displays;	/* attached diplays info */
+	unsigned num_displays;			/* number of defined displays */
+	unsigned default_display;
+
+	/* GPIOs */
+
+	unsigned long	gpcup;
+	unsigned long	gpcup_mask;
+	unsigned long	gpccon;
+	unsigned long	gpccon_mask;
+	unsigned long	gpdup;
+	unsigned long	gpdup_mask;
+	unsigned long	gpdcon;
+	unsigned long	gpdcon_mask;
+
+	/* lpc3600 control register */
+	unsigned long	lpcsel;
+};
+
+extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
+
+#endif /* __ASM_ARM_FB_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
new file mode 100644
index 000000000000..3b52b86498a6
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c2410/include/mach/gpio.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - GPIO lib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define gpio_get_value	__gpio_get_value
+#define gpio_set_value	__gpio_set_value
+#define gpio_cansleep	__gpio_cansleep
+
+#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
new file mode 100644
index 000000000000..d8a832729a8a
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
@@ -0,0 +1,64 @@
+/* arch/arm/mach-s3c2410/include/mach/h1940-latch.h
+ *
+ * Copyright (c) 2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  iPAQ H1940 series - latch definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_H1940_LATCH_H
+#define __ASM_ARCH_H1940_LATCH_H
+
+
+#ifndef __ASSEMBLY__
+#define H1940_LATCH		((void __force __iomem *)0xF8000000)
+#else
+#define H1940_LATCH		0xF8000000
+#endif
+
+#define H1940_PA_LATCH		(S3C2410_CS2)
+
+/* SD layer latch */
+
+#define H1940_LATCH_SDQ1		(1<<16)
+#define H1940_LATCH_LCD_P1		(1<<17)
+#define H1940_LATCH_LCD_P2		(1<<18)
+#define H1940_LATCH_LCD_P3		(1<<19)
+#define H1940_LATCH_MAX1698_nSHUTDOWN	(1<<20)		/* LCD backlight */
+#define H1940_LATCH_LED_RED		(1<<21)
+#define H1940_LATCH_SDQ7		(1<<22)
+#define H1940_LATCH_USB_DP		(1<<23)
+
+/* CPU layer latch */
+
+#define H1940_LATCH_UDA_POWER		(1<<24)
+#define H1940_LATCH_AUDIO_POWER		(1<<25)
+#define H1940_LATCH_SM803_ENABLE	(1<<26)
+#define H1940_LATCH_LCD_P4		(1<<27)
+#define H1940_LATCH_CPUQ5		(1<<28)		/* untraced */
+#define H1940_LATCH_BLUETOOTH_POWER	(1<<29)		/* active high */
+#define H1940_LATCH_LED_GREEN		(1<<30)
+#define H1940_LATCH_LED_FLASH		(1<<31)
+
+/* default settings */
+
+#define H1940_LATCH_DEFAULT		\
+	H1940_LATCH_LCD_P4		| \
+	H1940_LATCH_SM803_ENABLE	| \
+	H1940_LATCH_SDQ1		| \
+	H1940_LATCH_LCD_P1		| \
+	H1940_LATCH_LCD_P2		| \
+	H1940_LATCH_LCD_P3		| \
+	H1940_LATCH_MAX1698_nSHUTDOWN   | \
+	H1940_LATCH_CPUQ5
+
+/* control functions */
+
+extern void h1940_latch_control(unsigned int clear, unsigned int set);
+
+#endif /* __ASM_ARCH_H1940_LATCH_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/h1940.h b/arch/arm/mach-s3c2410/include/mach/h1940.h
new file mode 100644
index 000000000000..4559784129c0
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/h1940.h
@@ -0,0 +1,21 @@
+/* arch/arm/mach-s3c2410/include/mach/h1940.h
+ *
+ * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
+ *
+ * H1940 definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_H1940_H
+#define __ASM_ARCH_H1940_H
+
+#define H1940_SUSPEND_CHECKSUM		(0x30003ff8)
+#define H1940_SUSPEND_RESUMEAT		(0x30081000)
+#define H1940_SUSPEND_CHECK		(0x30080000)
+
+extern void h1940_pm_return(void);
+
+#endif /* __ASM_ARCH_H1940_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/hardware.h b/arch/arm/mach-s3c2410/include/mach/hardware.h
new file mode 100644
index 000000000000..74d5a1a4024c
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/hardware.h
@@ -0,0 +1,137 @@
+/* arch/arm/mach-s3c2410/include/mach/hardware.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+/* s3c2410_gpio_cfgpin
+ *
+ * set the configuration of the given pin to the value passed.
+ *
+ * eg:
+ *    s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
+ *    s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+*/
+
+extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ *	< 0 = no interrupt for this pin
+ *	>=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+/* s3c2410_gpio_irq2pin
+ *
+ * turn the given irq number into the corresponding GPIO number
+ *
+ * returns:
+ *	< 0 = no pin
+ *	>=0 = gpio pin number
+*/
+
+extern int s3c2410_gpio_irq2pin(unsigned int irq);
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern int s3c2400_gpio_getirq(unsigned int pin);
+
+#endif /* CONFIG_CPU_S3C2400 */
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ *      1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ *          width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+				  unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ *      0 => enable the pull-up
+ *
+ * eg;
+ *
+ *   s3c2410_gpio_pullup(S3C2410_GPB0, 0);
+ *   s3c2410_gpio_pullup(S3C2410_GPE8, 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+/* s3c2410_gpio_getpull
+ *
+ * Read the state of the pull-up on a given pin
+ *
+ * return:
+ *	< 0 => error code
+ *	  0 => enabled
+ *	  1 => disabled
+*/
+
+extern int s3c2410_gpio_getpull(unsigned int pin);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
+
+extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
+
+#ifdef CONFIG_CPU_S3C2440
+
+extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
+
+#endif /* CONFIG_CPU_S3C2440 */
+
+#ifdef CONFIG_CPU_S3C2412
+
+extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
+
+#endif /* CONFIG_CPU_S3C2412 */
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm/sizes.h>
+#include <mach/map.h>
+
+/* machine specific hardware definitions should go after this */
+
+/* currently here until moved into config (todo) */
+#define CONFIG_NO_MULTIWORD_IO
+
+#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/idle.h b/arch/arm/mach-s3c2410/include/mach/idle.h
new file mode 100644
index 000000000000..e9ddd706b16e
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/idle.h
@@ -0,0 +1,24 @@
+/* arch/arm/mach-s3c2410/include/mach/idle.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 CPU Idle controls
+*/
+
+#ifndef __ASM_ARCH_IDLE_H
+#define __ASM_ARCH_IDLE_H __FILE__
+
+/* This allows the over-ride of the default idle code, in case there
+ * is any other things to be done over idle (like DVS)
+*/
+
+extern void (*s3c24xx_idle)(void);
+
+extern void s3c24xx_default_idle(void);
+
+#endif /* __ASM_ARCH_IDLE_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/io.h b/arch/arm/mach-s3c2410/include/mach/io.h
new file mode 100644
index 000000000000..9813dbf2ae4f
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/io.h
@@ -0,0 +1,218 @@
+/*
+ * arch/arm/mach-s3c2410/include/mach/io.h
+ *  from arch/arm/mach-rpc/include/mach/io.h
+ *
+ * Copyright (C) 1997 Russell King
+ *	     (C) 2003 Simtec Electronics
+*/
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are above A28
+ * and are translated to the start of IO.  Note that all addresses are
+ * not shifted left!
+ */
+
+#define __PORT_PCIO(x)	((x) < (1<<28))
+
+#define PCIO_BASE	 (S3C24XX_VA_ISA_WORD)
+#define PCIO_BASE_b	 (S3C24XX_VA_ISA_BYTE)
+#define PCIO_BASE_w	 (S3C24XX_VA_ISA_WORD)
+#define PCIO_BASE_l	 (S3C24XX_VA_ISA_WORD)
+/*
+ * Dynamic IO functions - let the compiler
+ * optimize the expressions
+ */
+
+#define DECLARE_DYN_OUT(sz,fnsuffix,instr) \
+static inline void __out##fnsuffix (unsigned int val, unsigned int port) \
+{ \
+	unsigned long temp;				      \
+	__asm__ __volatile__(				      \
+	"cmp	%2, #(1<<28)\n\t"			      \
+	"mov	%0, %2\n\t"				      \
+	"addcc	%0, %0, %3\n\t"				      \
+	"str" instr " %1, [%0, #0 ]	@ out" #fnsuffix      \
+	: "=&r" (temp)					      \
+	: "r" (val), "r" (port), "Ir" (PCIO_BASE_##fnsuffix)  \
+	: "cc");					      \
+}
+
+
+#define DECLARE_DYN_IN(sz,fnsuffix,instr)				\
+static inline unsigned sz __in##fnsuffix (unsigned int port)		\
+{									\
+	unsigned long temp, value;					\
+	__asm__ __volatile__(						\
+	"cmp	%2, #(1<<28)\n\t"					\
+	"mov	%0, %2\n\t"						\
+	"addcc	%0, %0, %3\n\t"						\
+	"ldr" instr "	%1, [%0, #0 ]	@ in" #fnsuffix		\
+	: "=&r" (temp), "=r" (value)					\
+	: "r" (port), "Ir" (PCIO_BASE_##fnsuffix)	\
+	: "cc");							\
+	return (unsigned sz)value;					\
+}
+
+static inline void __iomem *__ioaddr (unsigned long port)
+{
+	return __PORT_PCIO(port) ? (PCIO_BASE + port) : (void __iomem *)port;
+}
+
+#define DECLARE_IO(sz,fnsuffix,instr)	\
+	DECLARE_DYN_IN(sz,fnsuffix,instr) \
+	DECLARE_DYN_OUT(sz,fnsuffix,instr)
+
+DECLARE_IO(char,b,"b")
+DECLARE_IO(short,w,"h")
+DECLARE_IO(int,l,"")
+
+#undef DECLARE_IO
+#undef DECLARE_DYN_IN
+
+/*
+ * Constant address IO functions
+ *
+ * These have to be macros for the 'J' constraint to work -
+ * +/-4096 immediate operand.
+ */
+#define __outbc(value,port)						\
+({									\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"strb	%0, [%1, %2]	@ outbc"			\
+		: : "r" (value), "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"strb	%0, [%1, #0]	@ outbc"			\
+		: : "r" (value), "r" ((port)));				\
+})
+
+#define __inbc(port)							\
+({									\
+	unsigned char result;						\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"ldrb	%0, [%1, %2]	@ inbc"				\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"ldrb	%0, [%1, #0]	@ inbc"				\
+		: "=r" (result) : "r" ((port)));			\
+	result;								\
+})
+
+#define __outwc(value,port)						\
+({									\
+	unsigned long v = value;					\
+	if (__PORT_PCIO((port))) {					\
+		if ((port) < 256 && (port) > -256)			\
+			__asm__ __volatile__(				\
+			"strh	%0, [%1, %2]	@ outwc"		\
+			: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
+		else if ((port) > 0)					\
+			__asm__ __volatile__(				\
+			"strh	%0, [%1, %2]	@ outwc"		\
+			: : "r" (v),					\
+			    "r" (PCIO_BASE + ((port) & ~0xff)),		\
+			     "Jr" (((port) & 0xff)));			\
+		else							\
+			__asm__ __volatile__(				\
+			"strh	%0, [%1, #0]	@ outwc"		\
+			: : "r" (v),					\
+			    "r" (PCIO_BASE + (port)));			\
+	} else								\
+		__asm__ __volatile__(					\
+		"strh	%0, [%1, #0]	@ outwc"			\
+		: : "r" (v), "r" ((port)));				\
+})
+
+#define __inwc(port)							\
+({									\
+	unsigned short result;						\
+	if (__PORT_PCIO((port))) {					\
+		if ((port) < 256 && (port) > -256 )			\
+			__asm__ __volatile__(				\
+			"ldrh	%0, [%1, %2]	@ inwc"			\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE),				\
+			  "Jr" ((port)));				\
+		else if ((port) > 0)					\
+			__asm__ __volatile__(				\
+			"ldrh	%0, [%1, %2]	@ inwc"			\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE + ((port) & ~0xff)),		\
+			  "Jr" (((port) & 0xff)));			\
+		else							\
+			__asm__ __volatile__(				\
+			"ldrh	%0, [%1, #0]	@ inwc"			\
+			: "=r" (result)					\
+			: "r" (PCIO_BASE + ((port))));			\
+	} else								\
+		__asm__ __volatile__(					\
+		"ldrh	%0, [%1, #0]	@ inwc"				\
+		: "=r" (result) : "r" ((port)));			\
+	result;								\
+})
+
+#define __outlc(value,port)						\
+({									\
+	unsigned long v = value;					\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"str	%0, [%1, %2]	@ outlc"			\
+		: : "r" (v), "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"str	%0, [%1, #0]	@ outlc"			\
+		: : "r" (v), "r" ((port)));		\
+})
+
+#define __inlc(port)							\
+({									\
+	unsigned long result;						\
+	if (__PORT_PCIO((port)))					\
+		__asm__ __volatile__(					\
+		"ldr	%0, [%1, %2]	@ inlc"				\
+		: "=r" (result) : "r" (PCIO_BASE), "Jr" ((port)));	\
+	else								\
+		__asm__ __volatile__(					\
+		"ldr	%0, [%1, #0]	@ inlc"				\
+		: "=r" (result) : "r" ((port)));		\
+	result;								\
+})
+
+#define __ioaddrc(port)	((__PORT_PCIO(port) ? PCIO_BASE + (port) : (void __iomem *)(port)))
+
+#define inb(p)		(__builtin_constant_p((p)) ? __inbc(p)	   : __inb(p))
+#define inw(p)		(__builtin_constant_p((p)) ? __inwc(p)	   : __inw(p))
+#define inl(p)		(__builtin_constant_p((p)) ? __inlc(p)	   : __inl(p))
+#define outb(v,p)	(__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p))
+#define outw(v,p)	(__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p))
+#define outl(v,p)	(__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p))
+#define __ioaddr(p)	(__builtin_constant_p((p)) ? __ioaddr(p)  : __ioaddrc(p))
+/* the following macro is deprecated */
+#define ioaddr(port)	__ioaddr((port))
+
+#define insb(p,d,l)	__raw_readsb(__ioaddr(p),d,l)
+#define insw(p,d,l)	__raw_readsw(__ioaddr(p),d,l)
+#define insl(p,d,l)	__raw_readsl(__ioaddr(p),d,l)
+
+#define outsb(p,d,l)	__raw_writesb(__ioaddr(p),d,l)
+#define outsw(p,d,l)	__raw_writesw(__ioaddr(p),d,l)
+#define outsl(p,d,l)	__raw_writesl(__ioaddr(p),d,l)
+
+/*
+ * 1:1 mapping for ioremapped regions.
+ */
+#define __mem_pci(x)	(x)
+
+#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
new file mode 100644
index 000000000000..950c71bf1489
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -0,0 +1,166 @@
+/* arch/arm/mach-s3c2410/include/mach/irqs.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *   Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H __FILE__
+
+#ifndef __ASM_ARM_IRQ_H
+#error "Do not include this directly, instead #include <asm/irq.h>"
+#endif
+
+/* we keep the first set of CPU IRQs out of the range of
+ * the ISA space, so that the PC104 has them to itself
+ * and we don't end up having to do horrible things to the
+ * standard ISA drivers....
+ */
+
+#define S3C2410_CPUIRQ_OFFSET	 (16)
+
+#define S3C2410_IRQ(x) ((x) + S3C2410_CPUIRQ_OFFSET)
+
+/* main cpu interrupts */
+#define IRQ_EINT0      S3C2410_IRQ(0)	    /* 16 */
+#define IRQ_EINT1      S3C2410_IRQ(1)
+#define IRQ_EINT2      S3C2410_IRQ(2)
+#define IRQ_EINT3      S3C2410_IRQ(3)
+#define IRQ_EINT4t7    S3C2410_IRQ(4)	    /* 20 */
+#define IRQ_EINT8t23   S3C2410_IRQ(5)
+#define IRQ_RESERVED6  S3C2410_IRQ(6)	    /* for s3c2410 */
+#define IRQ_CAM        S3C2410_IRQ(6)	    /* for s3c2440,s3c2443 */
+#define IRQ_BATT_FLT   S3C2410_IRQ(7)
+#define IRQ_TICK       S3C2410_IRQ(8)	    /* 24 */
+#define IRQ_WDT	       S3C2410_IRQ(9)	    /* WDT/AC97 for s3c2443 */
+#define IRQ_TIMER0     S3C2410_IRQ(10)
+#define IRQ_TIMER1     S3C2410_IRQ(11)
+#define IRQ_TIMER2     S3C2410_IRQ(12)
+#define IRQ_TIMER3     S3C2410_IRQ(13)
+#define IRQ_TIMER4     S3C2410_IRQ(14)
+#define IRQ_UART2      S3C2410_IRQ(15)
+#define IRQ_LCD	       S3C2410_IRQ(16)	    /* 32 */
+#define IRQ_DMA0       S3C2410_IRQ(17)	    /* IRQ_DMA for s3c2443 */
+#define IRQ_DMA1       S3C2410_IRQ(18)
+#define IRQ_DMA2       S3C2410_IRQ(19)
+#define IRQ_DMA3       S3C2410_IRQ(20)
+#define IRQ_SDI	       S3C2410_IRQ(21)
+#define IRQ_SPI0       S3C2410_IRQ(22)
+#define IRQ_UART1      S3C2410_IRQ(23)
+#define IRQ_RESERVED24 S3C2410_IRQ(24)	    /* 40 */
+#define IRQ_NFCON      S3C2410_IRQ(24)	    /* for s3c2440 */
+#define IRQ_USBD       S3C2410_IRQ(25)
+#define IRQ_USBH       S3C2410_IRQ(26)
+#define IRQ_IIC	       S3C2410_IRQ(27)
+#define IRQ_UART0      S3C2410_IRQ(28)	    /* 44 */
+#define IRQ_SPI1       S3C2410_IRQ(29)
+#define IRQ_RTC	       S3C2410_IRQ(30)
+#define IRQ_ADCPARENT  S3C2410_IRQ(31)
+
+/* interrupts generated from the external interrupts sources */
+#define IRQ_EINT4      S3C2410_IRQ(32)	   /* 48 */
+#define IRQ_EINT5      S3C2410_IRQ(33)
+#define IRQ_EINT6      S3C2410_IRQ(34)
+#define IRQ_EINT7      S3C2410_IRQ(35)
+#define IRQ_EINT8      S3C2410_IRQ(36)
+#define IRQ_EINT9      S3C2410_IRQ(37)
+#define IRQ_EINT10     S3C2410_IRQ(38)
+#define IRQ_EINT11     S3C2410_IRQ(39)
+#define IRQ_EINT12     S3C2410_IRQ(40)
+#define IRQ_EINT13     S3C2410_IRQ(41)
+#define IRQ_EINT14     S3C2410_IRQ(42)
+#define IRQ_EINT15     S3C2410_IRQ(43)
+#define IRQ_EINT16     S3C2410_IRQ(44)
+#define IRQ_EINT17     S3C2410_IRQ(45)
+#define IRQ_EINT18     S3C2410_IRQ(46)
+#define IRQ_EINT19     S3C2410_IRQ(47)
+#define IRQ_EINT20     S3C2410_IRQ(48)	   /* 64 */
+#define IRQ_EINT21     S3C2410_IRQ(49)
+#define IRQ_EINT22     S3C2410_IRQ(50)
+#define IRQ_EINT23     S3C2410_IRQ(51)
+
+
+#define IRQ_EINT(x)    (((x) >= 4) ? (IRQ_EINT4 + (x) - 4) : (IRQ_EINT0 + (x)))
+
+#define IRQ_LCD_FIFO   S3C2410_IRQ(52)
+#define IRQ_LCD_FRAME  S3C2410_IRQ(53)
+
+/* IRQs for the interal UARTs, and ADC
+ * these need to be ordered in number of appearance in the
+ * SUBSRC mask register
+*/
+
+#define S3C2410_IRQSUB(x)	S3C2410_IRQ((x)+54)
+
+#define IRQ_S3CUART_RX0		S3C2410_IRQSUB(0)	/* 70 */
+#define IRQ_S3CUART_TX0		S3C2410_IRQSUB(1)
+#define IRQ_S3CUART_ERR0	S3C2410_IRQSUB(2)
+
+#define IRQ_S3CUART_RX1		S3C2410_IRQSUB(3)	/* 73 */
+#define IRQ_S3CUART_TX1		S3C2410_IRQSUB(4)
+#define IRQ_S3CUART_ERR1	S3C2410_IRQSUB(5)
+
+#define IRQ_S3CUART_RX2		S3C2410_IRQSUB(6)	/* 76 */
+#define IRQ_S3CUART_TX2		S3C2410_IRQSUB(7)
+#define IRQ_S3CUART_ERR2	S3C2410_IRQSUB(8)
+
+#define IRQ_TC			S3C2410_IRQSUB(9)
+#define IRQ_ADC			S3C2410_IRQSUB(10)
+
+/* extra irqs for s3c2412 */
+
+#define IRQ_S3C2412_CFSDI	S3C2410_IRQ(21)
+
+#define IRQ_S3C2412_SDI		S3C2410_IRQSUB(13)
+#define IRQ_S3C2412_CF		S3C2410_IRQSUB(14)
+
+/* extra irqs for s3c2440 */
+
+#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
+#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)	/* S3C2443 too */
+#define IRQ_S3C2440_WDT		S3C2410_IRQSUB(13)
+#define IRQ_S3C2440_AC97	S3C2410_IRQSUB(14)
+
+/* irqs for s3c2443 */
+
+#define IRQ_S3C2443_DMA		S3C2410_IRQ(17)		/* IRQ_DMA1 */
+#define IRQ_S3C2443_UART3	S3C2410_IRQ(18)		/* IRQ_DMA2 */
+#define IRQ_S3C2443_CFCON	S3C2410_IRQ(19)		/* IRQ_DMA3 */
+#define IRQ_S3C2443_HSMMC	S3C2410_IRQ(20)		/* IRQ_SDI */
+#define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
+
+#define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
+#define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
+#define IRQ_S3C2443_LCD3	S3C2410_IRQSUB(16)
+#define IRQ_S3C2443_LCD4	S3C2410_IRQSUB(17)
+
+#define IRQ_S3C2443_DMA0	S3C2410_IRQSUB(18)
+#define IRQ_S3C2443_DMA1	S3C2410_IRQSUB(19)
+#define IRQ_S3C2443_DMA2	S3C2410_IRQSUB(20)
+#define IRQ_S3C2443_DMA3	S3C2410_IRQSUB(21)
+#define IRQ_S3C2443_DMA4	S3C2410_IRQSUB(22)
+#define IRQ_S3C2443_DMA5	S3C2410_IRQSUB(23)
+
+/* UART3 */
+#define IRQ_S3C2443_RX3		S3C2410_IRQSUB(24)
+#define IRQ_S3C2443_TX3		S3C2410_IRQSUB(25)
+#define IRQ_S3C2443_ERR3	S3C2410_IRQSUB(26)
+
+#define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
+#define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
+
+#ifdef CONFIG_CPU_S3C2443
+#define NR_IRQS (IRQ_S3C2443_AC97+1)
+#else
+#define NR_IRQS (IRQ_S3C2440_AC97+1)
+#endif
+
+/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
+#define FIQ_START		IRQ_EINT0
+
+#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/leds-gpio.h b/arch/arm/mach-s3c2410/include/mach/leds-gpio.h
new file mode 100644
index 000000000000..d8a7672519b6
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/leds-gpio.h
@@ -0,0 +1,28 @@
+/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C24XX - LEDs GPIO connector
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_LEDSGPIO_H
+#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h"
+
+#define S3C24XX_LEDF_ACTLOW	(1<<0)		/* LED is on when GPIO low */
+#define S3C24XX_LEDF_TRISTATE	(1<<1)		/* tristate to turn off */
+
+struct s3c24xx_led_platdata {
+	unsigned int		 gpio;
+	unsigned int		 flags;
+
+	char			*name;
+	char			*def_trigger;
+};
+
+#endif /* __ASM_ARCH_LEDSGPIO_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
new file mode 100644
index 000000000000..64bf7e94a5bf
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -0,0 +1,178 @@
+/* arch/arm/mach-s3c2410/include/mach/map.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MAP_H
+#define __ASM_ARCH_MAP_H
+
+#include <asm/plat-s3c/map.h>
+
+#define S3C2410_ADDR(x)		S3C_ADDR(x)
+
+/* interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C24XX_VA_IRQ	   S3C_VA_IRQ
+#define S3C2410_PA_IRQ	   (0x4A000000)
+#define S3C24XX_SZ_IRQ	   SZ_1M
+
+/* memory controller registers */
+#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* USB host controller */
+#define S3C2410_PA_USBHOST (0x49000000)
+#define S3C24XX_SZ_USBHOST SZ_1M
+
+/* DMA controller */
+#define S3C2410_PA_DMA	   (0x4B000000)
+#define S3C24XX_SZ_DMA	   SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_VA_CLKPWR  S3C_VA_SYS
+#define S3C2410_PA_CLKPWR  (0x4C000000)
+#define S3C24XX_SZ_CLKPWR  SZ_1M
+
+/* LCD controller */
+#define S3C2410_PA_LCD	   (0x4D000000)
+#define S3C24XX_SZ_LCD	   SZ_1M
+
+/* NAND flash controller */
+#define S3C2410_PA_NAND	   (0x4E000000)
+#define S3C24XX_SZ_NAND	   SZ_1M
+
+/* UARTs */
+#define S3C24XX_VA_UART	   S3C_VA_UART
+#define S3C2410_PA_UART	   (0x50000000)
+#define S3C24XX_SZ_UART	   SZ_1M
+
+/* Timers */
+#define S3C24XX_VA_TIMER   S3C_VA_TIMER
+#define S3C2410_PA_TIMER   (0x51000000)
+#define S3C24XX_SZ_TIMER   SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV  (0x52000000)
+#define S3C24XX_SZ_USBDEV  SZ_1M
+
+/* Watchdog */
+#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* IIC hardware controller */
+#define S3C2410_PA_IIC	   (0x54000000)
+#define S3C24XX_SZ_IIC	   SZ_1M
+
+/* IIS controller */
+#define S3C2410_PA_IIS	   (0x55000000)
+#define S3C24XX_SZ_IIS	   SZ_1M
+
+/* GPIO ports */
+
+/* the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 maping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO	   (0x56000000)
+#define S3C24XX_VA_GPIO	   ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C24XX_SZ_GPIO	   SZ_1M
+
+/* RTC */
+#define S3C2410_PA_RTC	   (0x57000000)
+#define S3C24XX_SZ_RTC	   SZ_1M
+
+/* ADC */
+#define S3C2410_PA_ADC	   (0x58000000)
+#define S3C24XX_SZ_ADC	   SZ_1M
+
+/* SPI */
+#define S3C2410_PA_SPI	   (0x59000000)
+#define S3C24XX_SZ_SPI	   SZ_1M
+
+/* SDI */
+#define S3C2410_PA_SDI	   (0x5A000000)
+#define S3C24XX_SZ_SDI	   SZ_1M
+
+/* CAMIF */
+#define S3C2440_PA_CAMIF   (0x4F000000)
+#define S3C2440_SZ_CAMIF   SZ_1M
+
+/* AC97 */
+
+#define S3C2440_PA_AC97	   (0x5B000000)
+#define S3C2440_SZ_AC97	   SZ_1M
+
+/* S3C2443 High-speed SD/MMC */
+#define S3C2443_PA_HSMMC   (0x4A800000)
+#define S3C2443_SZ_HSMMC   (256)
+
+/* ISA style IO, for each machine to sort out mappings for, if it
+ * implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C24XX_VA_ISA_WORD  S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE  S3C2410_ADDR(0x03000000)
+
+/* physical addresses of all the chip-select areas */
+
+#define S3C2410_CS0 (0x00000000)
+#define S3C2410_CS1 (0x08000000)
+#define S3C2410_CS2 (0x10000000)
+#define S3C2410_CS3 (0x18000000)
+#define S3C2410_CS4 (0x20000000)
+#define S3C2410_CS5 (0x28000000)
+#define S3C2410_CS6 (0x30000000)
+#define S3C2410_CS7 (0x38000000)
+
+#define S3C2410_SDRAM_PA    (S3C2410_CS6)
+
+/* Use a single interface for common resources between S3C24XX cpus */
+
+#define S3C24XX_PA_IRQ      S3C2410_PA_IRQ
+#define S3C24XX_PA_MEMCTRL  S3C2410_PA_MEMCTRL
+#define S3C24XX_PA_USBHOST  S3C2410_PA_USBHOST
+#define S3C24XX_PA_DMA      S3C2410_PA_DMA
+#define S3C24XX_PA_CLKPWR   S3C2410_PA_CLKPWR
+#define S3C24XX_PA_LCD      S3C2410_PA_LCD
+#define S3C24XX_PA_UART     S3C2410_PA_UART
+#define S3C24XX_PA_TIMER    S3C2410_PA_TIMER
+#define S3C24XX_PA_USBDEV   S3C2410_PA_USBDEV
+#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
+#define S3C24XX_PA_IIC      S3C2410_PA_IIC
+#define S3C24XX_PA_IIS      S3C2410_PA_IIS
+#define S3C24XX_PA_GPIO     S3C2410_PA_GPIO
+#define S3C24XX_PA_RTC      S3C2410_PA_RTC
+#define S3C24XX_PA_ADC      S3C2410_PA_ADC
+#define S3C24XX_PA_SPI      S3C2410_PA_SPI
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h
new file mode 100644
index 000000000000..93782628a786
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/memory.h
@@ -0,0 +1,19 @@
+/* arch/arm/mach-s3c2410/include/mach/memory.h
+ *  from arch/arm/mach-rpc/include/mach/memory.h
+ *
+ *  Copyright (C) 1996,1997,1998 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET	UL(0x30000000)
+
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h b/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
new file mode 100644
index 000000000000..e9e36b0abbac
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
@@ -0,0 +1,30 @@
+/* arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
+ *
+ * Copyright 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * OSIRIS - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_OSIRISCPLD_H
+#define __ASM_ARCH_OSIRISCPLD_H
+
+/* CTRL0 - NAND WP control */
+
+#define OSIRIS_CTRL0_NANDSEL		(0x3)
+#define OSIRIS_CTRL0_BOOT_INT		(1<<3)
+#define OSIRIS_CTRL0_PCMCIA		(1<<4)
+#define OSIRIS_CTRL0_FIX8		(1<<5)
+#define OSIRIS_CTRL0_PCMCIA_nWAIT	(1<<6)
+#define OSIRIS_CTRL0_PCMCIA_nIOIS16	(1<<7)
+
+#define OSIRIS_CTRL1_FIX8		(1<<0)
+
+#define OSIRIS_ID_REVMASK		(0x7)
+
+#endif /* __ASM_ARCH_OSIRISCPLD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-map.h b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
new file mode 100644
index 000000000000..639eff523d4e
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
@@ -0,0 +1,42 @@
+/* arch/arm/mach-s3c2410/include/mach/osiris-map.h
+ *
+ * (c) 2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * OSIRIS - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+#ifndef __ASM_ARCH_OSIRISMAP_H
+#define __ASM_ARCH_OSIRISMAP_H
+
+/* start peripherals off after the S3C2410 */
+
+#define OSIRIS_IOADDR(x)	(S3C2410_ADDR((x) + 0x04000000))
+
+#define OSIRIS_PA_CPLD		(S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define OSIRIS_VA_CTRL0		OSIRIS_IOADDR(0x00000000)
+#define OSIRIS_PA_CTRL0		(OSIRIS_PA_CPLD)
+
+#define OSIRIS_VA_CTRL1		OSIRIS_IOADDR(0x00100000)
+#define OSIRIS_PA_CTRL1		(OSIRIS_PA_CPLD + (1<<23))
+
+#define OSIRIS_VA_CTRL2		OSIRIS_IOADDR(0x00200000)
+#define OSIRIS_PA_CTRL2		(OSIRIS_PA_CPLD + (2<<23))
+
+#define OSIRIS_VA_CTRL3		OSIRIS_IOADDR(0x00300000)
+#define OSIRIS_PA_CTRL3		(OSIRIS_PA_CPLD + (2<<23))
+
+#define OSIRIS_VA_IDREG		OSIRIS_IOADDR(0x00700000)
+#define OSIRIS_PA_IDREG		(OSIRIS_PA_CPLD + (7<<23))
+
+#endif /* __ASM_ARCH_OSIRISMAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/otom-map.h b/arch/arm/mach-s3c2410/include/mach/otom-map.h
new file mode 100644
index 000000000000..f9277a52c145
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/otom-map.h
@@ -0,0 +1,30 @@
+/* arch/arm/mach-s3c2410/include/mach/otom-map.h
+ *
+ * (c) 2005 Guillaume GOURAT / NexVision
+ *          guillaume.gourat@nexvision.fr
+ *
+ * NexVision OTOM board memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x01300000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space.
+ */
+
+#ifndef __ASM_ARCH_OTOMMAP_H
+#define __ASM_ARCH_OTOMMAP_H
+
+#define OTOM_PA_CS8900A_BASE       (S3C2410_CS3 + 0x01000000)	/* nGCS3 +0x01000000 */
+#define OTOM_VA_CS8900A_BASE       S3C2410_ADDR(0x04000000)		/* 0xF4000000 */
+
+/* physical offset addresses for the peripherals */
+
+#define OTOM_PA_FLASH0_BASE        (S3C2410_CS0)				/* Bank 0 */
+
+#endif /* __ASM_ARCH_OTOMMAP_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
new file mode 100644
index 000000000000..d583688458a4
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -0,0 +1,197 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 clock register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_CLOCK
+#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $"
+
+#define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2410_PLLVAL(_m,_p,_s) ((_m) << 12 | ((_p) << 4) | ((_s)))
+
+#define S3C2410_LOCKTIME    S3C2410_CLKREG(0x00)
+#define S3C2410_MPLLCON	    S3C2410_CLKREG(0x04)
+#define S3C2410_UPLLCON	    S3C2410_CLKREG(0x08)
+#define S3C2410_CLKCON	    S3C2410_CLKREG(0x0C)
+#define S3C2410_CLKSLOW	    S3C2410_CLKREG(0x10)
+#define S3C2410_CLKDIVN	    S3C2410_CLKREG(0x14)
+
+#define S3C2410_CLKCON_IDLE	     (1<<2)
+#define S3C2410_CLKCON_POWER	     (1<<3)
+#define S3C2410_CLKCON_NAND	     (1<<4)
+#define S3C2410_CLKCON_LCDC	     (1<<5)
+#define S3C2410_CLKCON_USBH	     (1<<6)
+#define S3C2410_CLKCON_USBD	     (1<<7)
+#define S3C2410_CLKCON_PWMT	     (1<<8)
+#define S3C2410_CLKCON_SDI	     (1<<9)
+#define S3C2410_CLKCON_UART0	     (1<<10)
+#define S3C2410_CLKCON_UART1	     (1<<11)
+#define S3C2410_CLKCON_UART2	     (1<<12)
+#define S3C2410_CLKCON_GPIO	     (1<<13)
+#define S3C2410_CLKCON_RTC	     (1<<14)
+#define S3C2410_CLKCON_ADC	     (1<<15)
+#define S3C2410_CLKCON_IIC	     (1<<16)
+#define S3C2410_CLKCON_IIS	     (1<<17)
+#define S3C2410_CLKCON_SPI	     (1<<18)
+
+#define S3C2410_PLLCON_MDIVSHIFT     12
+#define S3C2410_PLLCON_PDIVSHIFT     4
+#define S3C2410_PLLCON_SDIVSHIFT     0
+#define S3C2410_PLLCON_MDIVMASK	     ((1<<(1+(19-12)))-1)
+#define S3C2410_PLLCON_PDIVMASK	     ((1<<5)-1)
+#define S3C2410_PLLCON_SDIVMASK	     3
+
+/* DCLKCON register addresses in gpio.h */
+
+#define S3C2410_DCLKCON_DCLK0EN	     (1<<0)
+#define S3C2410_DCLKCON_DCLK0_PCLK   (0<<1)
+#define S3C2410_DCLKCON_DCLK0_UCLK   (1<<1)
+#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
+#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
+#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
+#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
+
+#define S3C2410_DCLKCON_DCLK1EN	     (1<<16)
+#define S3C2410_DCLKCON_DCLK1_PCLK   (0<<17)
+#define S3C2410_DCLKCON_DCLK1_UCLK   (1<<17)
+#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
+#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
+#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
+#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
+
+#define S3C2410_CLKDIVN_PDIVN	     (1<<0)
+#define S3C2410_CLKDIVN_HDIVN	     (1<<1)
+
+#define S3C2410_CLKSLOW_UCLK_OFF	(1<<7)
+#define S3C2410_CLKSLOW_MPLL_OFF	(1<<5)
+#define S3C2410_CLKSLOW_SLOW		(1<<4)
+#define S3C2410_CLKSLOW_SLOWVAL(x)	(x)
+#define S3C2410_CLKSLOW_GET_SLOWVAL(x)	((x) & 7)
+
+#ifndef __ASSEMBLY__
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c2410_get_pll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2410_PLLCON_MDIVMASK;
+	pdiv &= S3C2410_PLLCON_PDIVMASK;
+	sdiv &= S3C2410_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
+
+/* extra registers */
+#define S3C2440_CAMDIVN	    S3C2410_CLKREG(0x18)
+
+#define S3C2440_CLKCON_CAMERA        (1<<19)
+#define S3C2440_CLKCON_AC97          (1<<20)
+
+#define S3C2440_CLKDIVN_PDIVN	     (1<<0)
+#define S3C2440_CLKDIVN_HDIVN_MASK   (3<<1)
+#define S3C2440_CLKDIVN_HDIVN_1      (0<<1)
+#define S3C2440_CLKDIVN_HDIVN_2      (1<<1)
+#define S3C2440_CLKDIVN_HDIVN_4_8    (2<<1)
+#define S3C2440_CLKDIVN_HDIVN_3_6    (3<<1)
+#define S3C2440_CLKDIVN_UCLK         (1<<3)
+
+#define S3C2440_CAMDIVN_CAMCLK_MASK  (0xf<<0)
+#define S3C2440_CAMDIVN_CAMCLK_SEL   (1<<4)
+#define S3C2440_CAMDIVN_HCLK3_HALF   (1<<8)
+#define S3C2440_CAMDIVN_HCLK4_HALF   (1<<9)
+#define S3C2440_CAMDIVN_DVSEN        (1<<12)
+
+#define S3C2442_CAMDIVN_CAMCLK_DIV3  (1<<5)
+
+#endif /* CONFIG_CPU_S3C2440 or CONFIG_CPU_S3C2442 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+
+#define S3C2412_OSCSET		S3C2410_CLKREG(0x18)
+#define S3C2412_CLKSRC		S3C2410_CLKREG(0x1C)
+
+#define S3C2412_PLLCON_OFF		(1<<20)
+
+#define S3C2412_CLKDIVN_PDIVN		(1<<2)
+#define S3C2412_CLKDIVN_HDIVN_MASK	(3<<0)
+#define S3C2412_CLKDIVN_ARMDIVN		(1<<3)
+#define S3C2412_CLKDIVN_DVSEN		(1<<4)
+#define S3C2412_CLKDIVN_HALFHCLK	(1<<5)
+#define S3C2412_CLKDIVN_USB48DIV	(1<<6)
+#define S3C2412_CLKDIVN_UARTDIV_MASK	(15<<8)
+#define S3C2412_CLKDIVN_UARTDIV_SHIFT	(8)
+#define S3C2412_CLKDIVN_I2SDIV_MASK	(15<<12)
+#define S3C2412_CLKDIVN_I2SDIV_SHIFT	(12)
+#define S3C2412_CLKDIVN_CAMDIV_MASK	(15<<16)
+#define S3C2412_CLKDIVN_CAMDIV_SHIFT	(16)
+
+#define S3C2412_CLKCON_WDT		(1<<28)
+#define S3C2412_CLKCON_SPI		(1<<27)
+#define S3C2412_CLKCON_IIS		(1<<26)
+#define S3C2412_CLKCON_IIC		(1<<25)
+#define S3C2412_CLKCON_ADC		(1<<24)
+#define S3C2412_CLKCON_RTC		(1<<23)
+#define S3C2412_CLKCON_GPIO		(1<<22)
+#define S3C2412_CLKCON_UART2		(1<<21)
+#define S3C2412_CLKCON_UART1		(1<<20)
+#define S3C2412_CLKCON_UART0		(1<<19)
+#define S3C2412_CLKCON_SDI		(1<<18)
+#define S3C2412_CLKCON_PWMT		(1<<17)
+#define S3C2412_CLKCON_USBD		(1<<16)
+#define S3C2412_CLKCON_CAMCLK		(1<<15)
+#define S3C2412_CLKCON_UARTCLK		(1<<14)
+/* missing 13 */
+#define S3C2412_CLKCON_USB_HOST48	(1<<12)
+#define S3C2412_CLKCON_USB_DEV48	(1<<11)
+#define S3C2412_CLKCON_HCLKdiv2		(1<<10)
+#define S3C2412_CLKCON_HCLKx2		(1<<9)
+#define S3C2412_CLKCON_SDRAM		(1<<8)
+/* missing 7 */
+#define S3C2412_CLKCON_USBH		S3C2410_CLKCON_USBH
+#define S3C2412_CLKCON_LCDC		S3C2410_CLKCON_LCDC
+#define S3C2412_CLKCON_NAND		S3C2410_CLKCON_NAND
+#define S3C2412_CLKCON_DMA3		(1<<3)
+#define S3C2412_CLKCON_DMA2		(1<<2)
+#define S3C2412_CLKCON_DMA1		(1<<1)
+#define S3C2412_CLKCON_DMA0		(1<<0)
+
+/* clock sourec controls */
+
+#define S3C2412_CLKSRC_EXTCLKDIV_MASK		(7 << 0)
+#define S3C2412_CLKSRC_EXTCLKDIV_SHIFT		(0)
+#define S3C2412_CLKSRC_MDIVCLK_EXTCLKDIV	(1<<3)
+#define S3C2412_CLKSRC_MSYSCLK_MPLL		(1<<4)
+#define S3C2412_CLKSRC_USYSCLK_UPLL		(1<<5)
+#define S3C2412_CLKSRC_UARTCLK_MPLL		(1<<8)
+#define S3C2412_CLKSRC_I2SCLK_MPLL		(1<<9)
+#define S3C2412_CLKSRC_USBCLK_HCLK		(1<<10)
+#define S3C2412_CLKSRC_CAMCLK_HCLK		(1<<11)
+#define S3C2412_CLKSRC_UREFCLK_EXTCLK	(1<<12)
+#define S3C2412_CLKSRC_EREFCLK_EXTCLK	(1<<14)
+
+#endif /* CONFIG_CPU_S3C2412 | CONFIG_CPU_S3C2413 */
+
+#endif /* __ASM_ARM_REGS_CLOCK */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-dsc.h b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
new file mode 100644
index 000000000000..3c3853cd3cf7
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-dsc.h
@@ -0,0 +1,184 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-dsc.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2440/S3C2412 Signal Drive Strength Control
+*/
+
+
+#ifndef __ASM_ARCH_REGS_DSC_H
+#define __ASM_ARCH_REGS_DSC_H "2440-dsc"
+
+#if defined(CONFIG_CPU_S3C2412)
+#define S3C2412_DSC0	   S3C2410_GPIOREG(0xdc)
+#define S3C2412_DSC1	   S3C2410_GPIOREG(0xe0)
+#endif
+
+#if defined(CONFIG_CPU_S3C244X)
+
+#define S3C2440_DSC0	   S3C2410_GPIOREG(0xc4)
+#define S3C2440_DSC1	   S3C2410_GPIOREG(0xc8)
+
+#define S3C2440_SELECT_DSC0 (0)
+#define S3C2440_SELECT_DSC1 (1<<31)
+
+#define S3C2440_DSC_GETSHIFT(x) ((x) & 31)
+
+#define S3C2440_DSC0_DISABLE	(1<<31)
+
+#define S3C2440_DSC0_ADDR       (S3C2440_SELECT_DSC0 | 8)
+#define S3C2440_DSC0_ADDR_12mA  (0<<8)
+#define S3C2440_DSC0_ADDR_10mA  (1<<8)
+#define S3C2440_DSC0_ADDR_8mA   (2<<8)
+#define S3C2440_DSC0_ADDR_6mA   (3<<8)
+#define S3C2440_DSC0_ADDR_MASK  (3<<8)
+
+/* D24..D31 */
+#define S3C2440_DSC0_DATA3      (S3C2440_SELECT_DSC0 | 6)
+#define S3C2440_DSC0_DATA3_12mA (0<<6)
+#define S3C2440_DSC0_DATA3_10mA (1<<6)
+#define S3C2440_DSC0_DATA3_8mA  (2<<6)
+#define S3C2440_DSC0_DATA3_6mA  (3<<6)
+#define S3C2440_DSC0_DATA3_MASK (3<<6)
+
+/* D16..D23 */
+#define S3C2440_DSC0_DATA2      (S3C2440_SELECT_DSC0 | 4)
+#define S3C2440_DSC0_DATA2_12mA (0<<4)
+#define S3C2440_DSC0_DATA2_10mA (1<<4)
+#define S3C2440_DSC0_DATA2_8mA  (2<<4)
+#define S3C2440_DSC0_DATA2_6mA  (3<<4)
+#define S3C2440_DSC0_DATA2_MASK (3<<4)
+
+/* D8..D15 */
+#define S3C2440_DSC0_DATA1      (S3C2440_SELECT_DSC0 | 2)
+#define S3C2440_DSC0_DATA1_12mA (0<<2)
+#define S3C2440_DSC0_DATA1_10mA (1<<2)
+#define S3C2440_DSC0_DATA1_8mA  (2<<2)
+#define S3C2440_DSC0_DATA1_6mA  (3<<2)
+#define S3C2440_DSC0_DATA1_MASK (3<<2)
+
+/* D0..D7 */
+#define S3C2440_DSC0_DATA0      (S3C2440_SELECT_DSC0 | 0)
+#define S3C2440_DSC0_DATA0_12mA (0<<0)
+#define S3C2440_DSC0_DATA0_10mA (1<<0)
+#define S3C2440_DSC0_DATA0_8mA  (2<<0)
+#define S3C2440_DSC0_DATA0_6mA  (3<<0)
+#define S3C2440_DSC0_DATA0_MASK (3<<0)
+
+#define S3C2440_DSC1_SCK1       (S3C2440_SELECT_DSC1 | 28)
+#define S3C2440_DSC1_SCK1_12mA  (0<<28)
+#define S3C2440_DSC1_SCK1_10mA  (1<<28)
+#define S3C2440_DSC1_SCK1_8mA   (2<<28)
+#define S3C2440_DSC1_SCK1_6mA   (3<<28)
+#define S3C2440_DSC1_SCK1_MASK  (3<<28)
+
+#define S3C2440_DSC1_SCK0       (S3C2440_SELECT_DSC1 | 26)
+#define S3C2440_DSC1_SCK0_12mA  (0<<26)
+#define S3C2440_DSC1_SCK0_10mA  (1<<26)
+#define S3C2440_DSC1_SCK0_8mA   (2<<26)
+#define S3C2440_DSC1_SCK0_6mA   (3<<26)
+#define S3C2440_DSC1_SCK0_MASK  (3<<26)
+
+#define S3C2440_DSC1_SCKE       (S3C2440_SELECT_DSC1 | 24)
+#define S3C2440_DSC1_SCKE_10mA  (0<<24)
+#define S3C2440_DSC1_SCKE_8mA   (1<<24)
+#define S3C2440_DSC1_SCKE_6mA   (2<<24)
+#define S3C2440_DSC1_SCKE_4mA   (3<<24)
+#define S3C2440_DSC1_SCKE_MASK  (3<<24)
+
+/* SDRAM nRAS/nCAS */
+#define S3C2440_DSC1_SDR        (S3C2440_SELECT_DSC1 | 22)
+#define S3C2440_DSC1_SDR_10mA   (0<<22)
+#define S3C2440_DSC1_SDR_8mA    (1<<22)
+#define S3C2440_DSC1_SDR_6mA    (2<<22)
+#define S3C2440_DSC1_SDR_4mA    (3<<22)
+#define S3C2440_DSC1_SDR_MASK   (3<<22)
+
+/* NAND Flash Controller */
+#define S3C2440_DSC1_NFC        (S3C2440_SELECT_DSC1 | 20)
+#define S3C2440_DSC1_NFC_10mA   (0<<20)
+#define S3C2440_DSC1_NFC_8mA    (1<<20)
+#define S3C2440_DSC1_NFC_6mA    (2<<20)
+#define S3C2440_DSC1_NFC_4mA    (3<<20)
+#define S3C2440_DSC1_NFC_MASK   (3<<20)
+
+/* nBE[0..3] */
+#define S3C2440_DSC1_nBE        (S3C2440_SELECT_DSC1 | 18)
+#define S3C2440_DSC1_nBE_10mA   (0<<18)
+#define S3C2440_DSC1_nBE_8mA    (1<<18)
+#define S3C2440_DSC1_nBE_6mA    (2<<18)
+#define S3C2440_DSC1_nBE_4mA    (3<<18)
+#define S3C2440_DSC1_nBE_MASK   (3<<18)
+
+#define S3C2440_DSC1_WOE        (S3C2440_SELECT_DSC1 | 16)
+#define S3C2440_DSC1_WOE_10mA   (0<<16)
+#define S3C2440_DSC1_WOE_8mA    (1<<16)
+#define S3C2440_DSC1_WOE_6mA    (2<<16)
+#define S3C2440_DSC1_WOE_4mA    (3<<16)
+#define S3C2440_DSC1_WOE_MASK   (3<<16)
+
+#define S3C2440_DSC1_CS7        (S3C2440_SELECT_DSC1 | 14)
+#define S3C2440_DSC1_CS7_10mA   (0<<14)
+#define S3C2440_DSC1_CS7_8mA    (1<<14)
+#define S3C2440_DSC1_CS7_6mA    (2<<14)
+#define S3C2440_DSC1_CS7_4mA    (3<<14)
+#define S3C2440_DSC1_CS7_MASK   (3<<14)
+
+#define S3C2440_DSC1_CS6        (S3C2440_SELECT_DSC1 | 12)
+#define S3C2440_DSC1_CS6_10mA   (0<<12)
+#define S3C2440_DSC1_CS6_8mA    (1<<12)
+#define S3C2440_DSC1_CS6_6mA    (2<<12)
+#define S3C2440_DSC1_CS6_4mA    (3<<12)
+#define S3C2440_DSC1_CS6_MASK   (3<<12)
+
+#define S3C2440_DSC1_CS5        (S3C2440_SELECT_DSC1 | 10)
+#define S3C2440_DSC1_CS5_10mA   (0<<10)
+#define S3C2440_DSC1_CS5_8mA    (1<<10)
+#define S3C2440_DSC1_CS5_6mA    (2<<10)
+#define S3C2440_DSC1_CS5_4mA    (3<<10)
+#define S3C2440_DSC1_CS5_MASK   (3<<10)
+
+#define S3C2440_DSC1_CS4        (S3C2440_SELECT_DSC1 | 8)
+#define S3C2440_DSC1_CS4_10mA   (0<<8)
+#define S3C2440_DSC1_CS4_8mA    (1<<8)
+#define S3C2440_DSC1_CS4_6mA    (2<<8)
+#define S3C2440_DSC1_CS4_4mA    (3<<8)
+#define S3C2440_DSC1_CS4_MASK   (3<<8)
+
+#define S3C2440_DSC1_CS3        (S3C2440_SELECT_DSC1 | 6)
+#define S3C2440_DSC1_CS3_10mA   (0<<6)
+#define S3C2440_DSC1_CS3_8mA    (1<<6)
+#define S3C2440_DSC1_CS3_6mA    (2<<6)
+#define S3C2440_DSC1_CS3_4mA    (3<<6)
+#define S3C2440_DSC1_CS3_MASK   (3<<6)
+
+#define S3C2440_DSC1_CS2        (S3C2440_SELECT_DSC1 | 4)
+#define S3C2440_DSC1_CS2_10mA   (0<<4)
+#define S3C2440_DSC1_CS2_8mA    (1<<4)
+#define S3C2440_DSC1_CS2_6mA    (2<<4)
+#define S3C2440_DSC1_CS2_4mA    (3<<4)
+#define S3C2440_DSC1_CS2_MASK   (3<<4)
+
+#define S3C2440_DSC1_CS1        (S3C2440_SELECT_DSC1 | 2)
+#define S3C2440_DSC1_CS1_10mA   (0<<2)
+#define S3C2440_DSC1_CS1_8mA    (1<<2)
+#define S3C2440_DSC1_CS1_6mA    (2<<2)
+#define S3C2440_DSC1_CS1_4mA    (3<<2)
+#define S3C2440_DSC1_CS1_MASK   (3<<2)
+
+#define S3C2440_DSC1_CS0        (S3C2440_SELECT_DSC1 | 0)
+#define S3C2440_DSC1_CS0_10mA   (0<<0)
+#define S3C2440_DSC1_CS0_8mA    (1<<0)
+#define S3C2440_DSC1_CS0_6mA    (2<<0)
+#define S3C2440_DSC1_CS0_4mA    (3<<0)
+#define S3C2440_DSC1_CS0_MASK   (3<<0)
+
+#endif /* CONFIG_CPU_S3C2440 */
+
+#endif	/* __ASM_ARCH_REGS_DSC_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
new file mode 100644
index 000000000000..30bec027f5fa
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -0,0 +1,1163 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
+ *		           http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 GPIO register definitions
+*/
+
+
+#ifndef __ASM_ARCH_REGS_GPIO_H
+#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $"
+
+#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
+
+#define S3C2410_GPIO_BANKA   (32*0)
+#define S3C2410_GPIO_BANKB   (32*1)
+#define S3C2410_GPIO_BANKC   (32*2)
+#define S3C2410_GPIO_BANKD   (32*3)
+#define S3C2410_GPIO_BANKE   (32*4)
+#define S3C2410_GPIO_BANKF   (32*5)
+#define S3C2410_GPIO_BANKG   (32*6)
+#define S3C2410_GPIO_BANKH   (32*7)
+
+#ifdef CONFIG_CPU_S3C2400
+#define S3C24XX_GPIO_BASE(x)  S3C2400_GPIO_BASE(x)
+#define S3C24XX_MISCCR        S3C2400_MISCCR
+#else
+#define S3C24XX_GPIO_BASE(x)  S3C2410_GPIO_BASE(x)
+#define S3C24XX_MISCCR	      S3C24XX_GPIOREG2(0x80)
+#endif /* CONFIG_CPU_S3C2400 */
+
+
+/* S3C2400 doesn't have a 1:1 mapping to S3C2410 gpio base pins */
+
+#define S3C2400_BANKNUM(pin)     (((pin) & ~31) / 32)
+#define S3C2400_BASEA2B(pin)     ((((pin) & ~31) >> 2))
+#define S3C2400_BASEC2H(pin)     ((S3C2400_BANKNUM(pin) * 10) + \
+                                 (2 * (S3C2400_BANKNUM(pin)-2)))
+
+#define S3C2400_GPIO_BASE(pin)   (pin < S3C2410_GPIO_BANKC ? \
+                                 S3C2400_BASEA2B(pin)+S3C24XX_VA_GPIO : \
+                                 S3C2400_BASEC2H(pin)+S3C24XX_VA_GPIO)
+
+
+#define S3C2410_GPIO_BASE(pin)   ((((pin) & ~31) >> 1) + S3C24XX_VA_GPIO)
+#define S3C2410_GPIO_OFFSET(pin) ((pin) & 31)
+
+/* general configuration options */
+
+#define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
+#define S3C2410_GPIO_INPUT   (0xFFFFFFF0)	/* not available on A */
+#define S3C2410_GPIO_OUTPUT  (0xFFFFFFF1)
+#define S3C2410_GPIO_IRQ     (0xFFFFFFF2)	/* not available for all */
+#define S3C2410_GPIO_SFN2    (0xFFFFFFF2)	/* bank A => addr/cs/nand */
+#define S3C2410_GPIO_SFN3    (0xFFFFFFF3)	/* not available on A */
+
+/* register address for the GPIO registers.
+ * S3C24XX_GPIOREG2 is for the second set of registers in the
+ * GPIO which move between s3c2410 and s3c2412 type systems */
+
+#define S3C2410_GPIOREG(x) ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_GPIOREG2(x) ((x) + S3C24XX_VA_GPIO2)
+
+
+/* configure GPIO ports A..G */
+
+/* port A - S3C2410: 22bits, zero in bit X makes pin X output
+ *          S3C2400: 18bits, zero in bit X makes pin X output
+ * 1 makes port special function, this is default
+*/
+#define S3C2410_GPACON	   S3C2410_GPIOREG(0x00)
+#define S3C2410_GPADAT	   S3C2410_GPIOREG(0x04)
+
+#define S3C2400_GPACON	   S3C2410_GPIOREG(0x00)
+#define S3C2400_GPADAT	   S3C2410_GPIOREG(0x04)
+
+#define S3C2410_GPA0         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
+#define S3C2410_GPA0_OUT     (0<<0)
+#define S3C2410_GPA0_ADDR0   (1<<0)
+
+#define S3C2410_GPA1         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
+#define S3C2410_GPA1_OUT     (0<<1)
+#define S3C2410_GPA1_ADDR16  (1<<1)
+
+#define S3C2410_GPA2         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
+#define S3C2410_GPA2_OUT     (0<<2)
+#define S3C2410_GPA2_ADDR17  (1<<2)
+
+#define S3C2410_GPA3         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
+#define S3C2410_GPA3_OUT     (0<<3)
+#define S3C2410_GPA3_ADDR18  (1<<3)
+
+#define S3C2410_GPA4         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
+#define S3C2410_GPA4_OUT     (0<<4)
+#define S3C2410_GPA4_ADDR19  (1<<4)
+
+#define S3C2410_GPA5         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
+#define S3C2410_GPA5_OUT     (0<<5)
+#define S3C2410_GPA5_ADDR20  (1<<5)
+
+#define S3C2410_GPA6         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
+#define S3C2410_GPA6_OUT     (0<<6)
+#define S3C2410_GPA6_ADDR21  (1<<6)
+
+#define S3C2410_GPA7         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
+#define S3C2410_GPA7_OUT     (0<<7)
+#define S3C2410_GPA7_ADDR22  (1<<7)
+
+#define S3C2410_GPA8         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
+#define S3C2410_GPA8_OUT     (0<<8)
+#define S3C2410_GPA8_ADDR23  (1<<8)
+
+#define S3C2410_GPA9         S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
+#define S3C2410_GPA9_OUT     (0<<9)
+#define S3C2410_GPA9_ADDR24  (1<<9)
+
+#define S3C2410_GPA10        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
+#define S3C2410_GPA10_OUT    (0<<10)
+#define S3C2410_GPA10_ADDR25 (1<<10)
+#define S3C2400_GPA10_SCKE   (1<<10)
+
+#define S3C2410_GPA11        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
+#define S3C2410_GPA11_OUT    (0<<11)
+#define S3C2410_GPA11_ADDR26 (1<<11)
+#define S3C2400_GPA11_nCAS0  (1<<11)
+
+#define S3C2410_GPA12        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
+#define S3C2410_GPA12_OUT    (0<<12)
+#define S3C2410_GPA12_nGCS1  (1<<12)
+#define S3C2400_GPA12_nCAS1  (1<<12)
+
+#define S3C2410_GPA13        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
+#define S3C2410_GPA13_OUT    (0<<13)
+#define S3C2410_GPA13_nGCS2  (1<<13)
+#define S3C2400_GPA13_nGCS1  (1<<13)
+
+#define S3C2410_GPA14        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
+#define S3C2410_GPA14_OUT    (0<<14)
+#define S3C2410_GPA14_nGCS3  (1<<14)
+#define S3C2400_GPA14_nGCS2  (1<<14)
+
+#define S3C2410_GPA15        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
+#define S3C2410_GPA15_OUT    (0<<15)
+#define S3C2410_GPA15_nGCS4  (1<<15)
+#define S3C2400_GPA15_nGCS3  (1<<15)
+
+#define S3C2410_GPA16        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
+#define S3C2410_GPA16_OUT    (0<<16)
+#define S3C2410_GPA16_nGCS5  (1<<16)
+#define S3C2400_GPA16_nGCS4  (1<<16)
+
+#define S3C2410_GPA17        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
+#define S3C2410_GPA17_OUT    (0<<17)
+#define S3C2410_GPA17_CLE    (1<<17)
+#define S3C2400_GPA17_nGCS5  (1<<17)
+
+#define S3C2410_GPA18        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
+#define S3C2410_GPA18_OUT    (0<<18)
+#define S3C2410_GPA18_ALE    (1<<18)
+
+#define S3C2410_GPA19        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
+#define S3C2410_GPA19_OUT    (0<<19)
+#define S3C2410_GPA19_nFWE   (1<<19)
+
+#define S3C2410_GPA20        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
+#define S3C2410_GPA20_OUT    (0<<20)
+#define S3C2410_GPA20_nFRE   (1<<20)
+
+#define S3C2410_GPA21        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
+#define S3C2410_GPA21_OUT    (0<<21)
+#define S3C2410_GPA21_nRSTOUT (1<<21)
+
+#define S3C2410_GPA22        S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
+#define S3C2410_GPA22_OUT    (0<<22)
+#define S3C2410_GPA22_nFCE   (1<<22)
+
+/* 0x08 and 0x0c are reserved on S3C2410 */
+
+/* S3C2410:
+ * GPB is 10 IO pins, each configured by 2 bits each in GPBCON.
+ *   00 = input, 01 = output, 10=special function, 11=reserved
+
+ * S3C2400:
+ * GPB is 16 IO pins, each configured by 2 bits each in GPBCON.
+ *   00 = input, 01 = output, 10=data, 11=special function
+
+ * bit 0,1 = pin 0, 2,3= pin 1...
+ *
+ * CPBUP = pull up resistor control, 1=disabled, 0=enabled
+*/
+
+#define S3C2410_GPBCON	   S3C2410_GPIOREG(0x10)
+#define S3C2410_GPBDAT	   S3C2410_GPIOREG(0x14)
+#define S3C2410_GPBUP	   S3C2410_GPIOREG(0x18)
+
+#define S3C2400_GPBCON	   S3C2410_GPIOREG(0x08)
+#define S3C2400_GPBDAT	   S3C2410_GPIOREG(0x0C)
+#define S3C2400_GPBUP	   S3C2410_GPIOREG(0x10)
+
+/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
+
+#define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
+#define S3C2410_GPB0_INP     (0x00 << 0)
+#define S3C2410_GPB0_OUTP    (0x01 << 0)
+#define S3C2410_GPB0_TOUT0   (0x02 << 0)
+#define S3C2400_GPB0_DATA16  (0x02 << 0)
+
+#define S3C2410_GPB1         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
+#define S3C2410_GPB1_INP     (0x00 << 2)
+#define S3C2410_GPB1_OUTP    (0x01 << 2)
+#define S3C2410_GPB1_TOUT1   (0x02 << 2)
+#define S3C2400_GPB1_DATA17  (0x02 << 2)
+
+#define S3C2410_GPB2         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
+#define S3C2410_GPB2_INP     (0x00 << 4)
+#define S3C2410_GPB2_OUTP    (0x01 << 4)
+#define S3C2410_GPB2_TOUT2   (0x02 << 4)
+#define S3C2400_GPB2_DATA18  (0x02 << 4)
+#define S3C2400_GPB2_TCLK1   (0x03 << 4)
+
+#define S3C2410_GPB3         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
+#define S3C2410_GPB3_INP     (0x00 << 6)
+#define S3C2410_GPB3_OUTP    (0x01 << 6)
+#define S3C2410_GPB3_TOUT3   (0x02 << 6)
+#define S3C2400_GPB3_DATA19  (0x02 << 6)
+#define S3C2400_GPB3_TXD1    (0x03 << 6)
+
+#define S3C2410_GPB4         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
+#define S3C2410_GPB4_INP     (0x00 << 8)
+#define S3C2410_GPB4_OUTP    (0x01 << 8)
+#define S3C2410_GPB4_TCLK0   (0x02 << 8)
+#define S3C2400_GPB4_DATA20  (0x02 << 8)
+#define S3C2410_GPB4_MASK    (0x03 << 8)
+#define S3C2400_GPB4_RXD1    (0x03 << 8)
+#define S3C2400_GPB4_MASK    (0x03 << 8)
+
+#define S3C2410_GPB5         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
+#define S3C2410_GPB5_INP     (0x00 << 10)
+#define S3C2410_GPB5_OUTP    (0x01 << 10)
+#define S3C2410_GPB5_nXBACK  (0x02 << 10)
+#define S3C2443_GPB5_XBACK   (0x03 << 10)
+#define S3C2400_GPB5_DATA21  (0x02 << 10)
+#define S3C2400_GPB5_nCTS1   (0x03 << 10)
+
+#define S3C2410_GPB6         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
+#define S3C2410_GPB6_INP     (0x00 << 12)
+#define S3C2410_GPB6_OUTP    (0x01 << 12)
+#define S3C2410_GPB6_nXBREQ  (0x02 << 12)
+#define S3C2443_GPB6_XBREQ   (0x03 << 12)
+#define S3C2400_GPB6_DATA22  (0x02 << 12)
+#define S3C2400_GPB6_nRTS1   (0x03 << 12)
+
+#define S3C2410_GPB7         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
+#define S3C2410_GPB7_INP     (0x00 << 14)
+#define S3C2410_GPB7_OUTP    (0x01 << 14)
+#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
+#define S3C2443_GPB7_XDACK1  (0x03 << 14)
+#define S3C2400_GPB7_DATA23  (0x02 << 14)
+
+#define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
+#define S3C2410_GPB8_INP     (0x00 << 16)
+#define S3C2410_GPB8_OUTP    (0x01 << 16)
+#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
+#define S3C2400_GPB8_DATA24  (0x02 << 16)
+
+#define S3C2410_GPB9         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
+#define S3C2410_GPB9_INP     (0x00 << 18)
+#define S3C2410_GPB9_OUTP    (0x01 << 18)
+#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
+#define S3C2443_GPB9_XDACK0  (0x03 << 18)
+#define S3C2400_GPB9_DATA25  (0x02 << 18)
+#define S3C2400_GPB9_I2SSDI  (0x03 << 18)
+
+#define S3C2410_GPB10        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
+#define S3C2410_GPB10_INP    (0x00 << 20)
+#define S3C2410_GPB10_OUTP   (0x01 << 20)
+#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
+#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
+#define S3C2400_GPB10_DATA26 (0x02 << 20)
+#define S3C2400_GPB10_nSS    (0x03 << 20)
+
+#define S3C2400_GPB11        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
+#define S3C2400_GPB11_INP    (0x00 << 22)
+#define S3C2400_GPB11_OUTP   (0x01 << 22)
+#define S3C2400_GPB11_DATA27 (0x02 << 22)
+
+#define S3C2400_GPB12        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
+#define S3C2400_GPB12_INP    (0x00 << 24)
+#define S3C2400_GPB12_OUTP   (0x01 << 24)
+#define S3C2400_GPB12_DATA28 (0x02 << 24)
+
+#define S3C2400_GPB13        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
+#define S3C2400_GPB13_INP    (0x00 << 26)
+#define S3C2400_GPB13_OUTP   (0x01 << 26)
+#define S3C2400_GPB13_DATA29 (0x02 << 26)
+
+#define S3C2400_GPB14        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
+#define S3C2400_GPB14_INP    (0x00 << 28)
+#define S3C2400_GPB14_OUTP   (0x01 << 28)
+#define S3C2400_GPB14_DATA30 (0x02 << 28)
+
+#define S3C2400_GPB15        S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
+#define S3C2400_GPB15_INP    (0x00 << 30)
+#define S3C2400_GPB15_OUTP   (0x01 << 30)
+#define S3C2400_GPB15_DATA31 (0x02 << 30)
+
+#define S3C2410_GPB_PUPDIS(x)  (1<<(x))
+
+/* Port C consits of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's sync/etc.
+*/
+
+#define S3C2410_GPCCON	   S3C2410_GPIOREG(0x20)
+#define S3C2410_GPCDAT	   S3C2410_GPIOREG(0x24)
+#define S3C2410_GPCUP	   S3C2410_GPIOREG(0x28)
+
+#define S3C2400_GPCCON	   S3C2410_GPIOREG(0x14)
+#define S3C2400_GPCDAT	   S3C2410_GPIOREG(0x18)
+#define S3C2400_GPCUP	   S3C2410_GPIOREG(0x1C)
+
+#define S3C2410_GPC0            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
+#define S3C2410_GPC0_INP	(0x00 << 0)
+#define S3C2410_GPC0_OUTP	(0x01 << 0)
+#define S3C2410_GPC0_LEND	(0x02 << 0)
+#define S3C2400_GPC0_VD0 	(0x02 << 0)
+
+#define S3C2410_GPC1            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
+#define S3C2410_GPC1_INP	(0x00 << 2)
+#define S3C2410_GPC1_OUTP	(0x01 << 2)
+#define S3C2410_GPC1_VCLK	(0x02 << 2)
+#define S3C2400_GPC1_VD1 	(0x02 << 2)
+
+#define S3C2410_GPC2            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
+#define S3C2410_GPC2_INP	(0x00 << 4)
+#define S3C2410_GPC2_OUTP	(0x01 << 4)
+#define S3C2410_GPC2_VLINE	(0x02 << 4)
+#define S3C2400_GPC2_VD2  	(0x02 << 4)
+
+#define S3C2410_GPC3            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
+#define S3C2410_GPC3_INP	(0x00 << 6)
+#define S3C2410_GPC3_OUTP	(0x01 << 6)
+#define S3C2410_GPC3_VFRAME	(0x02 << 6)
+#define S3C2400_GPC3_VD3   	(0x02 << 6)
+
+#define S3C2410_GPC4            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
+#define S3C2410_GPC4_INP	(0x00 << 8)
+#define S3C2410_GPC4_OUTP	(0x01 << 8)
+#define S3C2410_GPC4_VM		(0x02 << 8)
+#define S3C2400_GPC4_VD4	(0x02 << 8)
+
+#define S3C2410_GPC5            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
+#define S3C2410_GPC5_INP	(0x00 << 10)
+#define S3C2410_GPC5_OUTP	(0x01 << 10)
+#define S3C2410_GPC5_LCDVF0	(0x02 << 10)
+#define S3C2400_GPC5_VD5   	(0x02 << 10)
+
+#define S3C2410_GPC6            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
+#define S3C2410_GPC6_INP	(0x00 << 12)
+#define S3C2410_GPC6_OUTP	(0x01 << 12)
+#define S3C2410_GPC6_LCDVF1	(0x02 << 12)
+#define S3C2400_GPC6_VD6   	(0x02 << 12)
+
+#define S3C2410_GPC7            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
+#define S3C2410_GPC7_INP	(0x00 << 14)
+#define S3C2410_GPC7_OUTP	(0x01 << 14)
+#define S3C2410_GPC7_LCDVF2	(0x02 << 14)
+#define S3C2400_GPC7_VD7   	(0x02 << 14)
+
+#define S3C2410_GPC8            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
+#define S3C2410_GPC8_INP	(0x00 << 16)
+#define S3C2410_GPC8_OUTP	(0x01 << 16)
+#define S3C2410_GPC8_VD0	(0x02 << 16)
+#define S3C2400_GPC8_VD8	(0x02 << 16)
+
+#define S3C2410_GPC9            S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
+#define S3C2410_GPC9_INP	(0x00 << 18)
+#define S3C2410_GPC9_OUTP	(0x01 << 18)
+#define S3C2410_GPC9_VD1	(0x02 << 18)
+#define S3C2400_GPC9_VD9	(0x02 << 18)
+
+#define S3C2410_GPC10           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
+#define S3C2410_GPC10_INP	(0x00 << 20)
+#define S3C2410_GPC10_OUTP	(0x01 << 20)
+#define S3C2410_GPC10_VD2	(0x02 << 20)
+#define S3C2400_GPC10_VD10	(0x02 << 20)
+
+#define S3C2410_GPC11           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
+#define S3C2410_GPC11_INP	(0x00 << 22)
+#define S3C2410_GPC11_OUTP	(0x01 << 22)
+#define S3C2410_GPC11_VD3	(0x02 << 22)
+#define S3C2400_GPC11_VD11	(0x02 << 22)
+
+#define S3C2410_GPC12           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
+#define S3C2410_GPC12_INP	(0x00 << 24)
+#define S3C2410_GPC12_OUTP	(0x01 << 24)
+#define S3C2410_GPC12_VD4	(0x02 << 24)
+#define S3C2400_GPC12_VD12	(0x02 << 24)
+
+#define S3C2410_GPC13           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
+#define S3C2410_GPC13_INP	(0x00 << 26)
+#define S3C2410_GPC13_OUTP	(0x01 << 26)
+#define S3C2410_GPC13_VD5	(0x02 << 26)
+#define S3C2400_GPC13_VD13	(0x02 << 26)
+
+#define S3C2410_GPC14           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
+#define S3C2410_GPC14_INP	(0x00 << 28)
+#define S3C2410_GPC14_OUTP	(0x01 << 28)
+#define S3C2410_GPC14_VD6	(0x02 << 28)
+#define S3C2400_GPC14_VD14	(0x02 << 28)
+
+#define S3C2410_GPC15           S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
+#define S3C2410_GPC15_INP	(0x00 << 30)
+#define S3C2410_GPC15_OUTP	(0x01 << 30)
+#define S3C2410_GPC15_VD7	(0x02 << 30)
+#define S3C2400_GPC15_VD15	(0x02 << 30)
+
+#define S3C2410_GPC_PUPDIS(x)  (1<<(x))
+
+/*
+ * S3C2410: Port D consists of 16 GPIO/Special function
+ *
+ * almost identical setup to port b, but the special functions are mostly
+ * to do with the video system's data.
+ *
+ * S3C2400: Port D consists of 11 GPIO/Special function
+ *
+ * almost identical setup to port c
+*/
+
+#define S3C2410_GPDCON	   S3C2410_GPIOREG(0x30)
+#define S3C2410_GPDDAT	   S3C2410_GPIOREG(0x34)
+#define S3C2410_GPDUP	   S3C2410_GPIOREG(0x38)
+
+#define S3C2400_GPDCON	   S3C2410_GPIOREG(0x20)
+#define S3C2400_GPDDAT	   S3C2410_GPIOREG(0x24)
+#define S3C2400_GPDUP	   S3C2410_GPIOREG(0x28)
+
+#define S3C2410_GPD0            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
+#define S3C2410_GPD0_INP	(0x00 << 0)
+#define S3C2410_GPD0_OUTP	(0x01 << 0)
+#define S3C2410_GPD0_VD8	(0x02 << 0)
+#define S3C2400_GPD0_VFRAME	(0x02 << 0)
+#define S3C2442_GPD0_nSPICS1	(0x03 << 0)
+
+#define S3C2410_GPD1            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
+#define S3C2410_GPD1_INP	(0x00 << 2)
+#define S3C2410_GPD1_OUTP	(0x01 << 2)
+#define S3C2410_GPD1_VD9	(0x02 << 2)
+#define S3C2400_GPD1_VM		(0x02 << 2)
+#define S3C2442_GPD1_SPICLK1	(0x03 << 2)
+
+#define S3C2410_GPD2            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
+#define S3C2410_GPD2_INP	(0x00 << 4)
+#define S3C2410_GPD2_OUTP	(0x01 << 4)
+#define S3C2410_GPD2_VD10	(0x02 << 4)
+#define S3C2400_GPD2_VLINE	(0x02 << 4)
+
+#define S3C2410_GPD3            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
+#define S3C2410_GPD3_INP	(0x00 << 6)
+#define S3C2410_GPD3_OUTP	(0x01 << 6)
+#define S3C2410_GPD3_VD11	(0x02 << 6)
+#define S3C2400_GPD3_VCLK	(0x02 << 6)
+
+#define S3C2410_GPD4            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
+#define S3C2410_GPD4_INP	(0x00 << 8)
+#define S3C2410_GPD4_OUTP	(0x01 << 8)
+#define S3C2410_GPD4_VD12	(0x02 << 8)
+#define S3C2400_GPD4_LEND	(0x02 << 8)
+
+#define S3C2410_GPD5            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
+#define S3C2410_GPD5_INP	(0x00 << 10)
+#define S3C2410_GPD5_OUTP	(0x01 << 10)
+#define S3C2410_GPD5_VD13	(0x02 << 10)
+#define S3C2400_GPD5_TOUT0	(0x02 << 10)
+
+#define S3C2410_GPD6            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
+#define S3C2410_GPD6_INP	(0x00 << 12)
+#define S3C2410_GPD6_OUTP	(0x01 << 12)
+#define S3C2410_GPD6_VD14	(0x02 << 12)
+#define S3C2400_GPD6_TOUT1	(0x02 << 12)
+
+#define S3C2410_GPD7            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
+#define S3C2410_GPD7_INP	(0x00 << 14)
+#define S3C2410_GPD7_OUTP	(0x01 << 14)
+#define S3C2410_GPD7_VD15	(0x02 << 14)
+#define S3C2400_GPD7_TOUT2	(0x02 << 14)
+
+#define S3C2410_GPD8            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
+#define S3C2410_GPD8_INP	(0x00 << 16)
+#define S3C2410_GPD8_OUTP	(0x01 << 16)
+#define S3C2410_GPD8_VD16	(0x02 << 16)
+#define S3C2400_GPD8_TOUT3	(0x02 << 16)
+
+#define S3C2410_GPD9            S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
+#define S3C2410_GPD9_INP	(0x00 << 18)
+#define S3C2410_GPD9_OUTP	(0x01 << 18)
+#define S3C2410_GPD9_VD17	(0x02 << 18)
+#define S3C2400_GPD9_TCLK0	(0x02 << 18)
+#define S3C2410_GPD9_MASK       (0x03 << 18)
+
+#define S3C2410_GPD10           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
+#define S3C2410_GPD10_INP	(0x00 << 20)
+#define S3C2410_GPD10_OUTP	(0x01 << 20)
+#define S3C2410_GPD10_VD18	(0x02 << 20)
+#define S3C2400_GPD10_nWAIT	(0x02 << 20)
+
+#define S3C2410_GPD11           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
+#define S3C2410_GPD11_INP	(0x00 << 22)
+#define S3C2410_GPD11_OUTP	(0x01 << 22)
+#define S3C2410_GPD11_VD19	(0x02 << 22)
+
+#define S3C2410_GPD12           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
+#define S3C2410_GPD12_INP	(0x00 << 24)
+#define S3C2410_GPD12_OUTP	(0x01 << 24)
+#define S3C2410_GPD12_VD20	(0x02 << 24)
+
+#define S3C2410_GPD13           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
+#define S3C2410_GPD13_INP	(0x00 << 26)
+#define S3C2410_GPD13_OUTP	(0x01 << 26)
+#define S3C2410_GPD13_VD21	(0x02 << 26)
+
+#define S3C2410_GPD14           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
+#define S3C2410_GPD14_INP	(0x00 << 28)
+#define S3C2410_GPD14_OUTP	(0x01 << 28)
+#define S3C2410_GPD14_VD22	(0x02 << 28)
+#define S3C2410_GPD14_nSS1	(0x03 << 28)
+
+#define S3C2410_GPD15           S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
+#define S3C2410_GPD15_INP	(0x00 << 30)
+#define S3C2410_GPD15_OUTP	(0x01 << 30)
+#define S3C2410_GPD15_VD23	(0x02 << 30)
+#define S3C2410_GPD15_nSS0	(0x03 << 30)
+
+#define S3C2410_GPD_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port E consists of 16 GPIO/Special function
+ *
+ * again, the same as port B, but dealing with I2S, SDI, and
+ * more miscellaneous functions
+ *
+ * S3C2400:
+ * Port E consists of 12 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
+*/
+
+#define S3C2410_GPECON	   S3C2410_GPIOREG(0x40)
+#define S3C2410_GPEDAT	   S3C2410_GPIOREG(0x44)
+#define S3C2410_GPEUP	   S3C2410_GPIOREG(0x48)
+
+#define S3C2400_GPECON	   S3C2410_GPIOREG(0x2C)
+#define S3C2400_GPEDAT	   S3C2410_GPIOREG(0x30)
+#define S3C2400_GPEUP	   S3C2410_GPIOREG(0x34)
+
+#define S3C2410_GPE0           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
+#define S3C2410_GPE0_INP       (0x00 << 0)
+#define S3C2410_GPE0_OUTP      (0x01 << 0)
+#define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
+#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
+#define S3C2400_GPE0_EINT0     (0x02 << 0)
+#define S3C2410_GPE0_MASK      (0x03 << 0)
+
+#define S3C2410_GPE1           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
+#define S3C2410_GPE1_INP       (0x00 << 2)
+#define S3C2410_GPE1_OUTP      (0x01 << 2)
+#define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
+#define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
+#define S3C2400_GPE1_EINT1     (0x02 << 2)
+#define S3C2400_GPE1_nSS       (0x03 << 2)
+#define S3C2410_GPE1_MASK      (0x03 << 2)
+
+#define S3C2410_GPE2           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
+#define S3C2410_GPE2_INP       (0x00 << 4)
+#define S3C2410_GPE2_OUTP      (0x01 << 4)
+#define S3C2410_GPE2_CDCLK     (0x02 << 4)
+#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
+#define S3C2400_GPE2_EINT2     (0x02 << 4)
+#define S3C2400_GPE2_I2SSDI    (0x03 << 4)
+
+#define S3C2410_GPE3           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
+#define S3C2410_GPE3_INP       (0x00 << 6)
+#define S3C2410_GPE3_OUTP      (0x01 << 6)
+#define S3C2410_GPE3_I2SSDI    (0x02 << 6)
+#define S3C2443_GPE3_AC_SDI    (0x03 << 6)
+#define S3C2400_GPE3_EINT3     (0x02 << 6)
+#define S3C2400_GPE3_nCTS1     (0x03 << 6)
+#define S3C2410_GPE3_nSS0      (0x03 << 6)
+#define S3C2410_GPE3_MASK      (0x03 << 6)
+
+#define S3C2410_GPE4           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
+#define S3C2410_GPE4_INP       (0x00 << 8)
+#define S3C2410_GPE4_OUTP      (0x01 << 8)
+#define S3C2410_GPE4_I2SSDO    (0x02 << 8)
+#define S3C2443_GPE4_AC_SDO    (0x03 << 8)
+#define S3C2400_GPE4_EINT4     (0x02 << 8)
+#define S3C2400_GPE4_nRTS1     (0x03 << 8)
+#define S3C2410_GPE4_I2SSDI    (0x03 << 8)
+#define S3C2410_GPE4_MASK      (0x03 << 8)
+
+#define S3C2410_GPE5           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
+#define S3C2410_GPE5_INP       (0x00 << 10)
+#define S3C2410_GPE5_OUTP      (0x01 << 10)
+#define S3C2410_GPE5_SDCLK     (0x02 << 10)
+#define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
+#define S3C2400_GPE5_EINT5     (0x02 << 10)
+#define S3C2400_GPE5_TCLK1     (0x03 << 10)
+
+#define S3C2410_GPE6           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
+#define S3C2410_GPE6_INP       (0x00 << 12)
+#define S3C2410_GPE6_OUTP      (0x01 << 12)
+#define S3C2410_GPE6_SDCMD     (0x02 << 12)
+#define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
+#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
+#define S3C2400_GPE6_EINT6     (0x02 << 12)
+
+#define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
+#define S3C2410_GPE7_INP       (0x00 << 14)
+#define S3C2410_GPE7_OUTP      (0x01 << 14)
+#define S3C2410_GPE7_SDDAT0    (0x02 << 14)
+#define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
+#define S3C2443_GPE7_AC_SDI    (0x03 << 14)
+#define S3C2400_GPE7_EINT7     (0x02 << 14)
+
+#define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
+#define S3C2410_GPE8_INP       (0x00 << 16)
+#define S3C2410_GPE8_OUTP      (0x01 << 16)
+#define S3C2410_GPE8_SDDAT1    (0x02 << 16)
+#define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
+#define S3C2443_GPE8_AC_SDO    (0x03 << 16)
+#define S3C2400_GPE8_nXDACK0   (0x02 << 16)
+
+#define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
+#define S3C2410_GPE9_INP       (0x00 << 18)
+#define S3C2410_GPE9_OUTP      (0x01 << 18)
+#define S3C2410_GPE9_SDDAT2    (0x02 << 18)
+#define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
+#define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
+#define S3C2400_GPE9_nXDACK1   (0x02 << 18)
+#define S3C2400_GPE9_nXBACK    (0x03 << 18)
+
+#define S3C2410_GPE10          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
+#define S3C2410_GPE10_INP      (0x00 << 20)
+#define S3C2410_GPE10_OUTP     (0x01 << 20)
+#define S3C2410_GPE10_SDDAT3   (0x02 << 20)
+#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
+#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
+#define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
+
+#define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
+#define S3C2410_GPE11_INP      (0x00 << 22)
+#define S3C2410_GPE11_OUTP     (0x01 << 22)
+#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
+#define S3C2400_GPE11_nXDREQ1  (0x02 << 22)
+#define S3C2400_GPE11_nXBREQ   (0x03 << 22)
+
+#define S3C2410_GPE12          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
+#define S3C2410_GPE12_INP      (0x00 << 24)
+#define S3C2410_GPE12_OUTP     (0x01 << 24)
+#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
+
+#define S3C2410_GPE13          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
+#define S3C2410_GPE13_INP      (0x00 << 26)
+#define S3C2410_GPE13_OUTP     (0x01 << 26)
+#define S3C2410_GPE13_SPICLK0  (0x02 << 26)
+
+#define S3C2410_GPE14          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
+#define S3C2410_GPE14_INP      (0x00 << 28)
+#define S3C2410_GPE14_OUTP     (0x01 << 28)
+#define S3C2410_GPE14_IICSCL   (0x02 << 28)
+#define S3C2410_GPE14_MASK     (0x03 << 28)
+
+#define S3C2410_GPE15          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
+#define S3C2410_GPE15_INP      (0x00 << 30)
+#define S3C2410_GPE15_OUTP     (0x01 << 30)
+#define S3C2410_GPE15_IICSDA   (0x02 << 30)
+#define S3C2410_GPE15_MASK     (0x03 << 30)
+
+#define S3C2440_GPE0_ACSYNC    (0x03 << 0)
+#define S3C2440_GPE1_ACBITCLK  (0x03 << 2)
+#define S3C2440_GPE2_ACRESET   (0x03 << 4)
+#define S3C2440_GPE3_ACIN      (0x03 << 6)
+#define S3C2440_GPE4_ACOUT     (0x03 << 8)
+
+#define S3C2410_GPE_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port F consists of 8 GPIO/Special function
+ *
+ * GPIO / interrupt inputs
+ *
+ * GPFCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 undefined
+ *
+ * pull up works like all other ports.
+ *
+ * S3C2400:
+ * Port F consists of 7 GPIO/Special function
+ *
+ * GPIO/serial/misc pins
+*/
+
+#define S3C2410_GPFCON	   S3C2410_GPIOREG(0x50)
+#define S3C2410_GPFDAT	   S3C2410_GPIOREG(0x54)
+#define S3C2410_GPFUP	   S3C2410_GPIOREG(0x58)
+
+#define S3C2400_GPFCON	   S3C2410_GPIOREG(0x38)
+#define S3C2400_GPFDAT	   S3C2410_GPIOREG(0x3C)
+#define S3C2400_GPFUP	   S3C2410_GPIOREG(0x40)
+
+#define S3C2410_GPF0        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
+#define S3C2410_GPF0_INP    (0x00 << 0)
+#define S3C2410_GPF0_OUTP   (0x01 << 0)
+#define S3C2410_GPF0_EINT0  (0x02 << 0)
+#define S3C2400_GPF0_RXD0   (0x02 << 0)
+
+#define S3C2410_GPF1        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
+#define S3C2410_GPF1_INP    (0x00 << 2)
+#define S3C2410_GPF1_OUTP   (0x01 << 2)
+#define S3C2410_GPF1_EINT1  (0x02 << 2)
+#define S3C2400_GPF1_RXD1   (0x02 << 2)
+#define S3C2400_GPF1_IICSDA (0x03 << 2)
+
+#define S3C2410_GPF2        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
+#define S3C2410_GPF2_INP    (0x00 << 4)
+#define S3C2410_GPF2_OUTP   (0x01 << 4)
+#define S3C2410_GPF2_EINT2  (0x02 << 4)
+#define S3C2400_GPF2_TXD0   (0x02 << 4)
+
+#define S3C2410_GPF3        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
+#define S3C2410_GPF3_INP    (0x00 << 6)
+#define S3C2410_GPF3_OUTP   (0x01 << 6)
+#define S3C2410_GPF3_EINT3  (0x02 << 6)
+#define S3C2400_GPF3_TXD1   (0x02 << 6)
+#define S3C2400_GPF3_IICSCL (0x03 << 6)
+
+#define S3C2410_GPF4        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
+#define S3C2410_GPF4_INP    (0x00 << 8)
+#define S3C2410_GPF4_OUTP   (0x01 << 8)
+#define S3C2410_GPF4_EINT4  (0x02 << 8)
+#define S3C2400_GPF4_nRTS0  (0x02 << 8)
+#define S3C2400_GPF4_nXBACK (0x03 << 8)
+
+#define S3C2410_GPF5        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
+#define S3C2410_GPF5_INP    (0x00 << 10)
+#define S3C2410_GPF5_OUTP   (0x01 << 10)
+#define S3C2410_GPF5_EINT5  (0x02 << 10)
+#define S3C2400_GPF5_nCTS0  (0x02 << 10)
+#define S3C2400_GPF5_nXBREQ (0x03 << 10)
+
+#define S3C2410_GPF6        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
+#define S3C2410_GPF6_INP    (0x00 << 12)
+#define S3C2410_GPF6_OUTP   (0x01 << 12)
+#define S3C2410_GPF6_EINT6  (0x02 << 12)
+#define S3C2400_GPF6_CLKOUT (0x02 << 12)
+
+#define S3C2410_GPF7        S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
+#define S3C2410_GPF7_INP    (0x00 << 14)
+#define S3C2410_GPF7_OUTP   (0x01 << 14)
+#define S3C2410_GPF7_EINT7  (0x02 << 14)
+
+#define S3C2410_GPF_PUPDIS(x)  (1<<(x))
+
+/* S3C2410:
+ * Port G consists of 8 GPIO/IRQ/Special function
+ *
+ * GPGCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+ *
+ * S3C2400:
+ * Port G consists of 10 GPIO/Special function
+*/
+
+#define S3C2410_GPGCON	   S3C2410_GPIOREG(0x60)
+#define S3C2410_GPGDAT	   S3C2410_GPIOREG(0x64)
+#define S3C2410_GPGUP	   S3C2410_GPIOREG(0x68)
+
+#define S3C2400_GPGCON	   S3C2410_GPIOREG(0x44)
+#define S3C2400_GPGDAT	   S3C2410_GPIOREG(0x48)
+#define S3C2400_GPGUP	   S3C2410_GPIOREG(0x4C)
+
+#define S3C2410_GPG0          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
+#define S3C2410_GPG0_INP      (0x00 << 0)
+#define S3C2410_GPG0_OUTP     (0x01 << 0)
+#define S3C2410_GPG0_EINT8    (0x02 << 0)
+#define S3C2400_GPG0_I2SLRCK  (0x02 << 0)
+
+#define S3C2410_GPG1          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
+#define S3C2410_GPG1_INP      (0x00 << 2)
+#define S3C2410_GPG1_OUTP     (0x01 << 2)
+#define S3C2410_GPG1_EINT9    (0x02 << 2)
+#define S3C2400_GPG1_I2SSCLK  (0x02 << 2)
+
+#define S3C2410_GPG2          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
+#define S3C2410_GPG2_INP      (0x00 << 4)
+#define S3C2410_GPG2_OUTP     (0x01 << 4)
+#define S3C2410_GPG2_EINT10   (0x02 << 4)
+#define S3C2410_GPG2_nSS0     (0x03 << 4)
+#define S3C2400_GPG2_CDCLK    (0x02 << 4)
+
+#define S3C2410_GPG3          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
+#define S3C2410_GPG3_INP      (0x00 << 6)
+#define S3C2410_GPG3_OUTP     (0x01 << 6)
+#define S3C2410_GPG3_EINT11   (0x02 << 6)
+#define S3C2410_GPG3_nSS1     (0x03 << 6)
+#define S3C2400_GPG3_I2SSDO   (0x02 << 6)
+#define S3C2400_GPG3_I2SSDI   (0x03 << 6)
+
+#define S3C2410_GPG4          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
+#define S3C2410_GPG4_INP      (0x00 << 8)
+#define S3C2410_GPG4_OUTP     (0x01 << 8)
+#define S3C2410_GPG4_EINT12   (0x02 << 8)
+#define S3C2400_GPG4_MMCCLK   (0x02 << 8)
+#define S3C2400_GPG4_I2SSDI   (0x03 << 8)
+#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
+#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
+
+#define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
+#define S3C2410_GPG5_INP      (0x00 << 10)
+#define S3C2410_GPG5_OUTP     (0x01 << 10)
+#define S3C2410_GPG5_EINT13   (0x02 << 10)
+#define S3C2400_GPG5_MMCCMD   (0x02 << 10)
+#define S3C2400_GPG5_IICSDA   (0x03 << 10)
+#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
+
+#define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
+#define S3C2410_GPG6_INP      (0x00 << 12)
+#define S3C2410_GPG6_OUTP     (0x01 << 12)
+#define S3C2410_GPG6_EINT14   (0x02 << 12)
+#define S3C2400_GPG6_MMCDAT   (0x02 << 12)
+#define S3C2400_GPG6_IICSCL   (0x03 << 12)
+#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
+
+#define S3C2410_GPG7          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
+#define S3C2410_GPG7_INP      (0x00 << 14)
+#define S3C2410_GPG7_OUTP     (0x01 << 14)
+#define S3C2410_GPG7_EINT15   (0x02 << 14)
+#define S3C2410_GPG7_SPICLK1  (0x03 << 14)
+#define S3C2400_GPG7_SPIMISO  (0x02 << 14)
+#define S3C2400_GPG7_IICSDA   (0x03 << 14)
+
+#define S3C2410_GPG8          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
+#define S3C2410_GPG8_INP      (0x00 << 16)
+#define S3C2410_GPG8_OUTP     (0x01 << 16)
+#define S3C2410_GPG8_EINT16   (0x02 << 16)
+#define S3C2400_GPG8_SPIMOSI  (0x02 << 16)
+#define S3C2400_GPG8_IICSCL   (0x03 << 16)
+
+#define S3C2410_GPG9          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
+#define S3C2410_GPG9_INP      (0x00 << 18)
+#define S3C2410_GPG9_OUTP     (0x01 << 18)
+#define S3C2410_GPG9_EINT17   (0x02 << 18)
+#define S3C2400_GPG9_SPICLK   (0x02 << 18)
+#define S3C2400_GPG9_MMCCLK   (0x03 << 18)
+
+#define S3C2410_GPG10         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
+#define S3C2410_GPG10_INP     (0x00 << 20)
+#define S3C2410_GPG10_OUTP    (0x01 << 20)
+#define S3C2410_GPG10_EINT18  (0x02 << 20)
+
+#define S3C2410_GPG11         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
+#define S3C2410_GPG11_INP     (0x00 << 22)
+#define S3C2410_GPG11_OUTP    (0x01 << 22)
+#define S3C2410_GPG11_EINT19  (0x02 << 22)
+#define S3C2410_GPG11_TCLK1   (0x03 << 22)
+#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
+
+#define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
+#define S3C2410_GPG12_INP     (0x00 << 24)
+#define S3C2410_GPG12_OUTP    (0x01 << 24)
+#define S3C2410_GPG12_EINT20  (0x02 << 24)
+#define S3C2410_GPG12_XMON    (0x03 << 24)
+#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
+#define S3C2443_GPG12_nINPACK (0x03 << 24)
+
+#define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
+#define S3C2410_GPG13_INP     (0x00 << 26)
+#define S3C2410_GPG13_OUTP    (0x01 << 26)
+#define S3C2410_GPG13_EINT21  (0x02 << 26)
+#define S3C2410_GPG13_nXPON   (0x03 << 26)
+#define S3C2443_GPG13_CF_nREG (0x03 << 26)
+
+#define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
+#define S3C2410_GPG14_INP     (0x00 << 28)
+#define S3C2410_GPG14_OUTP    (0x01 << 28)
+#define S3C2410_GPG14_EINT22  (0x02 << 28)
+#define S3C2410_GPG14_YMON    (0x03 << 28)
+#define S3C2443_GPG14_CF_RESET (0x03 << 28)
+
+#define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
+#define S3C2410_GPG15_INP     (0x00 << 30)
+#define S3C2410_GPG15_OUTP    (0x01 << 30)
+#define S3C2410_GPG15_EINT23  (0x02 << 30)
+#define S3C2410_GPG15_nYPON   (0x03 << 30)
+#define S3C2443_GPG15_CF_PWR  (0x03 << 30)
+
+#define S3C2410_GPG_PUPDIS(x)  (1<<(x))
+
+/* Port H consists of11 GPIO/serial/Misc pins
+ *
+ * GPGCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2410_GPHCON	   S3C2410_GPIOREG(0x70)
+#define S3C2410_GPHDAT	   S3C2410_GPIOREG(0x74)
+#define S3C2410_GPHUP	   S3C2410_GPIOREG(0x78)
+
+#define S3C2410_GPH0        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
+#define S3C2410_GPH0_INP    (0x00 << 0)
+#define S3C2410_GPH0_OUTP   (0x01 << 0)
+#define S3C2410_GPH0_nCTS0  (0x02 << 0)
+
+#define S3C2410_GPH1        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
+#define S3C2410_GPH1_INP    (0x00 << 2)
+#define S3C2410_GPH1_OUTP   (0x01 << 2)
+#define S3C2410_GPH1_nRTS0  (0x02 << 2)
+
+#define S3C2410_GPH2        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
+#define S3C2410_GPH2_INP    (0x00 << 4)
+#define S3C2410_GPH2_OUTP   (0x01 << 4)
+#define S3C2410_GPH2_TXD0   (0x02 << 4)
+
+#define S3C2410_GPH3        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
+#define S3C2410_GPH3_INP    (0x00 << 6)
+#define S3C2410_GPH3_OUTP   (0x01 << 6)
+#define S3C2410_GPH3_RXD0   (0x02 << 6)
+
+#define S3C2410_GPH4        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
+#define S3C2410_GPH4_INP    (0x00 << 8)
+#define S3C2410_GPH4_OUTP   (0x01 << 8)
+#define S3C2410_GPH4_TXD1   (0x02 << 8)
+
+#define S3C2410_GPH5        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
+#define S3C2410_GPH5_INP    (0x00 << 10)
+#define S3C2410_GPH5_OUTP   (0x01 << 10)
+#define S3C2410_GPH5_RXD1   (0x02 << 10)
+
+#define S3C2410_GPH6        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
+#define S3C2410_GPH6_INP    (0x00 << 12)
+#define S3C2410_GPH6_OUTP   (0x01 << 12)
+#define S3C2410_GPH6_TXD2   (0x02 << 12)
+#define S3C2410_GPH6_nRTS1  (0x03 << 12)
+
+#define S3C2410_GPH7        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
+#define S3C2410_GPH7_INP    (0x00 << 14)
+#define S3C2410_GPH7_OUTP   (0x01 << 14)
+#define S3C2410_GPH7_RXD2   (0x02 << 14)
+#define S3C2410_GPH7_nCTS1  (0x03 << 14)
+
+#define S3C2410_GPH8        S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
+#define S3C2410_GPH8_INP    (0x00 << 16)
+#define S3C2410_GPH8_OUTP   (0x01 << 16)
+#define S3C2410_GPH8_UCLK   (0x02 << 16)
+
+#define S3C2410_GPH9          S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
+#define S3C2410_GPH9_INP      (0x00 << 18)
+#define S3C2410_GPH9_OUTP     (0x01 << 18)
+#define S3C2410_GPH9_CLKOUT0  (0x02 << 18)
+#define S3C2442_GPH9_nSPICS0  (0x03 << 18)
+
+#define S3C2410_GPH10         S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
+#define S3C2410_GPH10_INP     (0x00 << 20)
+#define S3C2410_GPH10_OUTP    (0x01 << 20)
+#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
+
+/* The S3C2412 and S3C2413 move the GPJ register set to after
+ * GPH, which means all registers after 0x80 are now offset by 0x10
+ * for the 2412/2413 from the 2410/2440/2442
+*/
+
+/* miscellaneous control */
+#define S3C2400_MISCCR	   S3C2410_GPIOREG(0x54)
+#define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
+#define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
+
+#define S3C24XX_DCLKCON	   S3C24XX_GPIOREG2(0x84)
+
+/* see clock.h for dclk definitions */
+
+/* pullup control on databus */
+#define S3C2410_MISCCR_SPUCR_HEN    (0<<0)
+#define S3C2410_MISCCR_SPUCR_HDIS   (1<<0)
+#define S3C2410_MISCCR_SPUCR_LEN    (0<<1)
+#define S3C2410_MISCCR_SPUCR_LDIS   (1<<1)
+
+#define S3C2400_MISCCR_SPUCR_LEN    (0<<0)
+#define S3C2400_MISCCR_SPUCR_LDIS   (1<<0)
+#define S3C2400_MISCCR_SPUCR_HEN    (0<<1)
+#define S3C2400_MISCCR_SPUCR_HDIS   (1<<1)
+
+#define S3C2400_MISCCR_HZ_STOPEN    (0<<2)
+#define S3C2400_MISCCR_HZ_STOPPREV  (1<<2)
+
+#define S3C2410_MISCCR_USBDEV	    (0<<3)
+#define S3C2410_MISCCR_USBHOST	    (1<<3)
+
+#define S3C2410_MISCCR_CLK0_MPLL    (0<<4)
+#define S3C2410_MISCCR_CLK0_UPLL    (1<<4)
+#define S3C2410_MISCCR_CLK0_FCLK    (2<<4)
+#define S3C2410_MISCCR_CLK0_HCLK    (3<<4)
+#define S3C2410_MISCCR_CLK0_PCLK    (4<<4)
+#define S3C2410_MISCCR_CLK0_DCLK0   (5<<4)
+#define S3C2410_MISCCR_CLK0_MASK    (7<<4)
+
+#define S3C2412_MISCCR_CLK0_RTC	    (2<<4)
+
+#define S3C2410_MISCCR_CLK1_MPLL    (0<<8)
+#define S3C2410_MISCCR_CLK1_UPLL    (1<<8)
+#define S3C2410_MISCCR_CLK1_FCLK    (2<<8)
+#define S3C2410_MISCCR_CLK1_HCLK    (3<<8)
+#define S3C2410_MISCCR_CLK1_PCLK    (4<<8)
+#define S3C2410_MISCCR_CLK1_DCLK1   (5<<8)
+#define S3C2410_MISCCR_CLK1_MASK    (7<<8)
+
+#define S3C2412_MISCCR_CLK1_CLKsrc  (0<<8)
+
+#define S3C2410_MISCCR_USBSUSPND0   (1<<12)
+#define S3C2410_MISCCR_USBSUSPND1   (1<<13)
+
+#define S3C2410_MISCCR_nRSTCON	    (1<<16)
+
+#define S3C2410_MISCCR_nEN_SCLK0    (1<<17)
+#define S3C2410_MISCCR_nEN_SCLK1    (1<<18)
+#define S3C2410_MISCCR_nEN_SCLKE    (1<<19)	/* not 2412 */
+#define S3C2410_MISCCR_SDSLEEP	    (7<<17)
+
+/* external interrupt control... */
+/* S3C2410_EXTINT0 -> irq sense control for EINT0..EINT7
+ * S3C2410_EXTINT1 -> irq sense control for EINT8..EINT15
+ * S3C2410_EXTINT2 -> irq sense control for EINT16..EINT23
+ *
+ * note S3C2410_EXTINT2 has filtering options for EINT16..EINT23
+ *
+ * Samsung datasheet p9-25
+*/
+#define S3C2400_EXTINT0    S3C2410_GPIOREG(0x58)
+#define S3C2410_EXTINT0	   S3C2410_GPIOREG(0x88)
+#define S3C2410_EXTINT1	   S3C2410_GPIOREG(0x8C)
+#define S3C2410_EXTINT2	   S3C2410_GPIOREG(0x90)
+
+#define S3C24XX_EXTINT0	   S3C24XX_GPIOREG2(0x88)
+#define S3C24XX_EXTINT1	   S3C24XX_GPIOREG2(0x8C)
+#define S3C24XX_EXTINT2	   S3C24XX_GPIOREG2(0x90)
+
+/* values for S3C2410_EXTINT0/1/2 */
+#define S3C2410_EXTINT_LOWLEV	 (0x00)
+#define S3C2410_EXTINT_HILEV	 (0x01)
+#define S3C2410_EXTINT_FALLEDGE	 (0x02)
+#define S3C2410_EXTINT_RISEEDGE	 (0x04)
+#define S3C2410_EXTINT_BOTHEDGE	 (0x06)
+
+/* interrupt filtering conrrol for EINT16..EINT23 */
+#define S3C2410_EINFLT0	   S3C2410_GPIOREG(0x94)
+#define S3C2410_EINFLT1	   S3C2410_GPIOREG(0x98)
+#define S3C2410_EINFLT2	   S3C2410_GPIOREG(0x9C)
+#define S3C2410_EINFLT3	   S3C2410_GPIOREG(0xA0)
+
+#define S3C24XX_EINFLT0	   S3C24XX_GPIOREG2(0x94)
+#define S3C24XX_EINFLT1	   S3C24XX_GPIOREG2(0x98)
+#define S3C24XX_EINFLT2	   S3C24XX_GPIOREG2(0x9C)
+#define S3C24XX_EINFLT3	   S3C24XX_GPIOREG2(0xA0)
+
+/* values for interrupt filtering */
+#define S3C2410_EINTFLT_PCLK		(0x00)
+#define S3C2410_EINTFLT_EXTCLK		(1<<7)
+#define S3C2410_EINTFLT_WIDTHMSK(x)	((x) & 0x3f)
+
+/* removed EINTxxxx defs from here, not meant for this */
+
+/* GSTATUS have miscellaneous information in them
+ *
+ * These move between s3c2410 and s3c2412 style systems.
+ */
+
+#define S3C2410_GSTATUS0   S3C2410_GPIOREG(0x0AC)
+#define S3C2410_GSTATUS1   S3C2410_GPIOREG(0x0B0)
+#define S3C2410_GSTATUS2   S3C2410_GPIOREG(0x0B4)
+#define S3C2410_GSTATUS3   S3C2410_GPIOREG(0x0B8)
+#define S3C2410_GSTATUS4   S3C2410_GPIOREG(0x0BC)
+
+#define S3C2412_GSTATUS0   S3C2410_GPIOREG(0x0BC)
+#define S3C2412_GSTATUS1   S3C2410_GPIOREG(0x0C0)
+#define S3C2412_GSTATUS2   S3C2410_GPIOREG(0x0C4)
+#define S3C2412_GSTATUS3   S3C2410_GPIOREG(0x0C8)
+#define S3C2412_GSTATUS4   S3C2410_GPIOREG(0x0CC)
+
+#define S3C24XX_GSTATUS0   S3C24XX_GPIOREG2(0x0AC)
+#define S3C24XX_GSTATUS1   S3C24XX_GPIOREG2(0x0B0)
+#define S3C24XX_GSTATUS2   S3C24XX_GPIOREG2(0x0B4)
+#define S3C24XX_GSTATUS3   S3C24XX_GPIOREG2(0x0B8)
+#define S3C24XX_GSTATUS4   S3C24XX_GPIOREG2(0x0BC)
+
+#define S3C2410_GSTATUS0_nWAIT	   (1<<3)
+#define S3C2410_GSTATUS0_NCON	   (1<<2)
+#define S3C2410_GSTATUS0_RnB	   (1<<1)
+#define S3C2410_GSTATUS0_nBATTFLT  (1<<0)
+
+#define S3C2410_GSTATUS1_IDMASK	   (0xffff0000)
+#define S3C2410_GSTATUS1_2410	   (0x32410000)
+#define S3C2410_GSTATUS1_2412	   (0x32412001)
+#define S3C2410_GSTATUS1_2440	   (0x32440000)
+#define S3C2410_GSTATUS1_2442	   (0x32440aaa)
+
+#define S3C2410_GSTATUS2_WTRESET   (1<<2)
+#define S3C2410_GSTATUS2_OFFRESET  (1<<1)
+#define S3C2410_GSTATUS2_PONRESET  (1<<0)
+
+/* open drain control register */
+#define S3C2400_OPENCR     S3C2410_GPIOREG(0x50)
+
+#define S3C2400_OPENCR_OPC_RXD1DIS  (0<<0)
+#define S3C2400_OPENCR_OPC_RXD1EN   (1<<0)
+#define S3C2400_OPENCR_OPC_TXD1DIS  (0<<1)
+#define S3C2400_OPENCR_OPC_TXD1EN   (1<<1)
+#define S3C2400_OPENCR_OPC_CMDDIS   (0<<2)
+#define S3C2400_OPENCR_OPC_CMDEN    (1<<2)
+#define S3C2400_OPENCR_OPC_DATDIS   (0<<3)
+#define S3C2400_OPENCR_OPC_DATEN    (1<<3)
+#define S3C2400_OPENCR_OPC_MISODIS  (0<<4)
+#define S3C2400_OPENCR_OPC_MISOEN   (1<<4)
+#define S3C2400_OPENCR_OPC_MOSIDIS  (0<<5)
+#define S3C2400_OPENCR_OPC_MOSIEN   (1<<5)
+
+/* 2412/2413 sleep configuration registers */
+
+#define S3C2412_GPBSLPCON	S3C2410_GPIOREG(0x1C)
+#define S3C2412_GPCSLPCON	S3C2410_GPIOREG(0x2C)
+#define S3C2412_GPDSLPCON	S3C2410_GPIOREG(0x3C)
+#define S3C2412_GPFSLPCON	S3C2410_GPIOREG(0x5C)
+#define S3C2412_GPGSLPCON	S3C2410_GPIOREG(0x6C)
+#define S3C2412_GPHSLPCON	S3C2410_GPIOREG(0x7C)
+
+/* definitions for each pin bit */
+#define S3C2412_GPIO_SLPCON_LOW	 ( 0x00 )
+#define S3C2412_GPIO_SLPCON_HIGH ( 0x01 )
+#define S3C2412_GPIO_SLPCON_IN   ( 0x02 )
+#define S3C2412_GPIO_SLPCON_PULL ( 0x03 )
+
+#define S3C2412_SLPCON_LOW(x)	( 0x00 << ((x) * 2))
+#define S3C2412_SLPCON_HIGH(x)	( 0x01 << ((x) * 2))
+#define S3C2412_SLPCON_IN(x)	( 0x02 << ((x) * 2))
+#define S3C2412_SLPCON_PULL(x)	( 0x03 << ((x) * 2))
+#define S3C2412_SLPCON_EINT(x)	( 0x02 << ((x) * 2))  /* only IRQ pins */
+#define S3C2412_SLPCON_MASK(x)	( 0x03 << ((x) * 2))
+
+#define S3C2412_SLPCON_ALL_LOW	(0x0)
+#define S3C2412_SLPCON_ALL_HIGH	(0x11111111 | 0x44444444)
+#define S3C2412_SLPCON_ALL_IN  	(0x22222222 | 0x88888888)
+#define S3C2412_SLPCON_ALL_PULL	(0x33333333)
+
+#endif	/* __ASM_ARCH_REGS_GPIO_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
new file mode 100644
index 000000000000..1202ca5e99f6
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
@@ -0,0 +1,106 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-gpioj.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2440 GPIO J register definitions
+*/
+
+
+#ifndef __ASM_ARCH_REGS_GPIOJ_H
+#define __ASM_ARCH_REGS_GPIOJ_H "gpioj"
+
+/* Port J consists of 13 GPIO/Camera pins
+ *
+ * GPJCON has 2 bits for each of the input pins on port F
+ *   00 = 0 input, 1 output, 2 Camera
+ *
+ * pull up works like all other ports.
+*/
+
+#define S3C2440_GPIO_BANKJ  (416)
+
+#define S3C2440_GPJCON	    S3C2410_GPIOREG(0xd0)
+#define S3C2440_GPJDAT	    S3C2410_GPIOREG(0xd4)
+#define S3C2440_GPJUP	    S3C2410_GPIOREG(0xd8)
+
+#define S3C2413_GPJCON		S3C2410_GPIOREG(0x80)
+#define S3C2413_GPJDAT		S3C2410_GPIOREG(0x84)
+#define S3C2413_GPJUP		S3C2410_GPIOREG(0x88)
+#define S3C2413_GPJSLPCON	S3C2410_GPIOREG(0x8C)
+
+#define S3C2440_GPJ0            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 0)
+#define S3C2440_GPJ0_INP        (0x00 << 0)
+#define S3C2440_GPJ0_OUTP       (0x01 << 0)
+#define S3C2440_GPJ0_CAMDATA0   (0x02 << 0)
+
+#define S3C2440_GPJ1            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 1)
+#define S3C2440_GPJ1_INP        (0x00 << 2)
+#define S3C2440_GPJ1_OUTP       (0x01 << 2)
+#define S3C2440_GPJ1_CAMDATA1   (0x02 << 2)
+
+#define S3C2440_GPJ2            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 2)
+#define S3C2440_GPJ2_INP        (0x00 << 4)
+#define S3C2440_GPJ2_OUTP       (0x01 << 4)
+#define S3C2440_GPJ2_CAMDATA2   (0x02 << 4)
+
+#define S3C2440_GPJ3            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 3)
+#define S3C2440_GPJ3_INP        (0x00 << 6)
+#define S3C2440_GPJ3_OUTP       (0x01 << 6)
+#define S3C2440_GPJ3_CAMDATA3   (0x02 << 6)
+
+#define S3C2440_GPJ4            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 4)
+#define S3C2440_GPJ4_INP        (0x00 << 8)
+#define S3C2440_GPJ4_OUTP       (0x01 << 8)
+#define S3C2440_GPJ4_CAMDATA4   (0x02 << 8)
+
+#define S3C2440_GPJ5            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 5)
+#define S3C2440_GPJ5_INP        (0x00 << 10)
+#define S3C2440_GPJ5_OUTP       (0x01 << 10)
+#define S3C2440_GPJ5_CAMDATA5   (0x02 << 10)
+
+#define S3C2440_GPJ6            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 6)
+#define S3C2440_GPJ6_INP        (0x00 << 12)
+#define S3C2440_GPJ6_OUTP       (0x01 << 12)
+#define S3C2440_GPJ6_CAMDATA6   (0x02 << 12)
+
+#define S3C2440_GPJ7            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 7)
+#define S3C2440_GPJ7_INP        (0x00 << 14)
+#define S3C2440_GPJ7_OUTP       (0x01 << 14)
+#define S3C2440_GPJ7_CAMDATA7   (0x02 << 14)
+
+#define S3C2440_GPJ8            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 8)
+#define S3C2440_GPJ8_INP        (0x00 << 16)
+#define S3C2440_GPJ8_OUTP       (0x01 << 16)
+#define S3C2440_GPJ8_CAMPCLK    (0x02 << 16)
+
+#define S3C2440_GPJ9            S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 9)
+#define S3C2440_GPJ9_INP        (0x00 << 18)
+#define S3C2440_GPJ9_OUTP       (0x01 << 18)
+#define S3C2440_GPJ9_CAMVSYNC   (0x02 << 18)
+
+#define S3C2440_GPJ10           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 10)
+#define S3C2440_GPJ10_INP       (0x00 << 20)
+#define S3C2440_GPJ10_OUTP      (0x01 << 20)
+#define S3C2440_GPJ10_CAMHREF   (0x02 << 20)
+
+#define S3C2440_GPJ11           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 11)
+#define S3C2440_GPJ11_INP       (0x00 << 22)
+#define S3C2440_GPJ11_OUTP      (0x01 << 22)
+#define S3C2440_GPJ11_CAMCLKOUT (0x02 << 22)
+
+#define S3C2440_GPJ12           S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 12)
+#define S3C2440_GPJ12_INP       (0x00 << 24)
+#define S3C2440_GPJ12_OUTP      (0x01 << 24)
+#define S3C2440_GPJ12_CAMRESET  (0x02 << 24)
+
+#define S3C2443_GPJ13		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 13)
+#define S3C2443_GPJ14		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 14)
+#define S3C2443_GPJ15		S3C2410_GPIONO(S3C2440_GPIO_BANKJ, 15)
+
+#endif	/* __ASM_ARCH_REGS_GPIOJ_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-irq.h b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
new file mode 100644
index 000000000000..b057c06d167a
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-irq.h
@@ -0,0 +1,43 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-irq.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef ___ASM_ARCH_REGS_IRQ_H
+#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $"
+
+/* interrupt controller */
+
+#define S3C2410_IRQREG(x)   ((x) + S3C24XX_VA_IRQ)
+#define S3C2410_EINTREG(x)  ((x) + S3C24XX_VA_GPIO)
+#define S3C24XX_EINTREG(x)  ((x) + S3C24XX_VA_GPIO2)
+
+#define S3C2410_SRCPND	       S3C2410_IRQREG(0x000)
+#define S3C2410_INTMOD	       S3C2410_IRQREG(0x004)
+#define S3C2410_INTMSK	       S3C2410_IRQREG(0x008)
+#define S3C2410_PRIORITY       S3C2410_IRQREG(0x00C)
+#define S3C2410_INTPND	       S3C2410_IRQREG(0x010)
+#define S3C2410_INTOFFSET      S3C2410_IRQREG(0x014)
+#define S3C2410_SUBSRCPND      S3C2410_IRQREG(0x018)
+#define S3C2410_INTSUBMSK      S3C2410_IRQREG(0x01C)
+
+/* mask: 0=enable, 1=disable
+ * 1 bit EINT, 4=EINT4, 23=EINT23
+ * EINT0,1,2,3 are not handled here.
+*/
+
+#define S3C2410_EINTMASK       S3C2410_EINTREG(0x0A4)
+#define S3C2410_EINTPEND       S3C2410_EINTREG(0X0A8)
+#define S3C2412_EINTMASK       S3C2410_EINTREG(0x0B4)
+#define S3C2412_EINTPEND       S3C2410_EINTREG(0X0B8)
+
+#define S3C24XX_EINTMASK       S3C24XX_EINTREG(0x0A4)
+#define S3C24XX_EINTPEND       S3C24XX_EINTREG(0X0A8)
+
+#endif /* ___ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-lcd.h b/arch/arm/mach-s3c2410/include/mach/regs-lcd.h
new file mode 100644
index 000000000000..893b8742f954
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-lcd.h
@@ -0,0 +1,162 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-lcd.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+
+#ifndef ___ASM_ARCH_REGS_LCD_H
+#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $"
+
+#define S3C2410_LCDREG(x)	(x)
+
+/* LCD control registers */
+#define S3C2410_LCDCON1	    S3C2410_LCDREG(0x00)
+#define S3C2410_LCDCON2	    S3C2410_LCDREG(0x04)
+#define S3C2410_LCDCON3	    S3C2410_LCDREG(0x08)
+#define S3C2410_LCDCON4	    S3C2410_LCDREG(0x0C)
+#define S3C2410_LCDCON5	    S3C2410_LCDREG(0x10)
+
+#define S3C2410_LCDCON1_CLKVAL(x)  ((x) << 8)
+#define S3C2410_LCDCON1_MMODE	   (1<<7)
+#define S3C2410_LCDCON1_DSCAN4	   (0<<5)
+#define S3C2410_LCDCON1_STN4	   (1<<5)
+#define S3C2410_LCDCON1_STN8	   (2<<5)
+#define S3C2410_LCDCON1_TFT	   (3<<5)
+
+#define S3C2410_LCDCON1_STN1BPP	   (0<<1)
+#define S3C2410_LCDCON1_STN2GREY   (1<<1)
+#define S3C2410_LCDCON1_STN4GREY   (2<<1)
+#define S3C2410_LCDCON1_STN8BPP	   (3<<1)
+#define S3C2410_LCDCON1_STN12BPP   (4<<1)
+
+#define S3C2410_LCDCON1_TFT1BPP	   (8<<1)
+#define S3C2410_LCDCON1_TFT2BPP	   (9<<1)
+#define S3C2410_LCDCON1_TFT4BPP	   (10<<1)
+#define S3C2410_LCDCON1_TFT8BPP	   (11<<1)
+#define S3C2410_LCDCON1_TFT16BPP   (12<<1)
+#define S3C2410_LCDCON1_TFT24BPP   (13<<1)
+
+#define S3C2410_LCDCON1_ENVID	   (1)
+
+#define S3C2410_LCDCON1_MODEMASK    0x1E
+
+#define S3C2410_LCDCON2_VBPD(x)	    ((x) << 24)
+#define S3C2410_LCDCON2_LINEVAL(x)  ((x) << 14)
+#define S3C2410_LCDCON2_VFPD(x)	    ((x) << 6)
+#define S3C2410_LCDCON2_VSPW(x)	    ((x) << 0)
+
+#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF)
+#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >>  6) & 0xFF)
+#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >>  0) & 0x3F)
+
+#define S3C2410_LCDCON3_HBPD(x)	    ((x) << 19)
+#define S3C2410_LCDCON3_WDLY(x)	    ((x) << 19)
+#define S3C2410_LCDCON3_HOZVAL(x)   ((x) << 8)
+#define S3C2410_LCDCON3_HFPD(x)	    ((x) << 0)
+#define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0)
+
+#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F)
+#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >>  0) & 0xFF)
+
+/* LDCCON4 changes for STN mode on the S3C2412 */
+
+#define S3C2410_LCDCON4_MVAL(x)	    ((x) << 8)
+#define S3C2410_LCDCON4_HSPW(x)	    ((x) << 0)
+#define S3C2410_LCDCON4_WLH(x)	    ((x) << 0)
+
+#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >>  0) & 0xFF)
+
+#define S3C2410_LCDCON5_BPP24BL	    (1<<12)
+#define S3C2410_LCDCON5_FRM565	    (1<<11)
+#define S3C2410_LCDCON5_INVVCLK	    (1<<10)
+#define S3C2410_LCDCON5_INVVLINE    (1<<9)
+#define S3C2410_LCDCON5_INVVFRAME   (1<<8)
+#define S3C2410_LCDCON5_INVVD	    (1<<7)
+#define S3C2410_LCDCON5_INVVDEN	    (1<<6)
+#define S3C2410_LCDCON5_INVPWREN    (1<<5)
+#define S3C2410_LCDCON5_INVLEND	    (1<<4)
+#define S3C2410_LCDCON5_PWREN	    (1<<3)
+#define S3C2410_LCDCON5_ENLEND	    (1<<2)
+#define S3C2410_LCDCON5_BSWP	    (1<<1)
+#define S3C2410_LCDCON5_HWSWP	    (1<<0)
+
+/* framebuffer start addressed */
+#define S3C2410_LCDSADDR1   S3C2410_LCDREG(0x14)
+#define S3C2410_LCDSADDR2   S3C2410_LCDREG(0x18)
+#define S3C2410_LCDSADDR3   S3C2410_LCDREG(0x1C)
+
+#define S3C2410_LCDBANK(x)	((x) << 21)
+#define S3C2410_LCDBASEU(x)	(x)
+
+#define S3C2410_OFFSIZE(x)	((x) << 11)
+#define S3C2410_PAGEWIDTH(x)	(x)
+
+/* colour lookup and miscellaneous controls */
+
+#define S3C2410_REDLUT	   S3C2410_LCDREG(0x20)
+#define S3C2410_GREENLUT   S3C2410_LCDREG(0x24)
+#define S3C2410_BLUELUT	   S3C2410_LCDREG(0x28)
+
+#define S3C2410_DITHMODE   S3C2410_LCDREG(0x4C)
+#define S3C2410_TPAL	   S3C2410_LCDREG(0x50)
+
+#define S3C2410_TPAL_EN		(1<<24)
+
+/* interrupt info */
+#define S3C2410_LCDINTPND  S3C2410_LCDREG(0x54)
+#define S3C2410_LCDSRCPND  S3C2410_LCDREG(0x58)
+#define S3C2410_LCDINTMSK  S3C2410_LCDREG(0x5C)
+#define S3C2410_LCDINT_FIWSEL	(1<<2)
+#define	S3C2410_LCDINT_FRSYNC	(1<<1)
+#define S3C2410_LCDINT_FICNT	(1<<0)
+
+/* s3c2442 extra stn registers */
+
+#define S3C2442_REDLUT		S3C2410_LCDREG(0x20)
+#define S3C2442_GREENLUT	S3C2410_LCDREG(0x24)
+#define S3C2442_BLUELUT		S3C2410_LCDREG(0x28)
+#define S3C2442_DITHMODE	S3C2410_LCDREG(0x20)
+
+#define S3C2410_LPCSEL	   S3C2410_LCDREG(0x60)
+
+#define S3C2410_TFTPAL(x)  S3C2410_LCDREG((0x400 + (x)*4))
+
+/* S3C2412 registers */
+
+#define S3C2412_TPAL		S3C2410_LCDREG(0x20)
+
+#define S3C2412_LCDINTPND	S3C2410_LCDREG(0x24)
+#define S3C2412_LCDSRCPND	S3C2410_LCDREG(0x28)
+#define S3C2412_LCDINTMSK	S3C2410_LCDREG(0x2C)
+
+#define S3C2412_TCONSEL		S3C2410_LCDREG(0x30)
+
+#define S3C2412_LCDCON6		S3C2410_LCDREG(0x34)
+#define S3C2412_LCDCON7		S3C2410_LCDREG(0x38)
+#define S3C2412_LCDCON8		S3C2410_LCDREG(0x3C)
+#define S3C2412_LCDCON9		S3C2410_LCDREG(0x40)
+
+#define S3C2412_REDLUT(x)	S3C2410_LCDREG(0x44 + ((x)*4))
+#define S3C2412_GREENLUT(x)	S3C2410_LCDREG(0x60 + ((x)*4))
+#define S3C2412_BLUELUT(x)	S3C2410_LCDREG(0x98 + ((x)*4))
+
+#define S3C2412_FRCPAT(x)	S3C2410_LCDREG(0xB4 + ((x)*4))
+
+/* general registers */
+
+/* base of the LCD registers, where INTPND, INTSRC and then INTMSK
+ * are available. */
+
+#define S3C2410_LCDINTBASE	S3C2410_LCDREG(0x54)
+#define S3C2412_LCDINTBASE	S3C2410_LCDREG(0x24)
+
+#define S3C24XX_LCDINTPND	(0x00)
+#define S3C24XX_LCDSRCPND	(0x04)
+#define S3C24XX_LCDINTMSK	(0x08)
+
+#endif /* ___ASM_ARCH_REGS_LCD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
new file mode 100644
index 000000000000..f9926abd5cde
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h
@@ -0,0 +1,220 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-mem.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Memory Control register definitions
+*/
+
+#ifndef __ASM_ARM_MEMREGS_H
+#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $"
+
+#ifndef S3C2410_MEMREG
+#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#endif
+
+/* bus width, and wait state control */
+#define S3C2410_BWSCON			S3C2410_MEMREG(0x0000)
+
+/* bank zero config - note, pinstrapped from OM pins! */
+#define S3C2410_BWSCON_DW0_16		(1<<1)
+#define S3C2410_BWSCON_DW0_32		(2<<1)
+
+/* bank one configs */
+#define S3C2410_BWSCON_DW1_8		(0<<4)
+#define S3C2410_BWSCON_DW1_16		(1<<4)
+#define S3C2410_BWSCON_DW1_32		(2<<4)
+#define S3C2410_BWSCON_WS1		(1<<6)
+#define S3C2410_BWSCON_ST1		(1<<7)
+
+/* bank 2 configurations */
+#define S3C2410_BWSCON_DW2_8		(0<<8)
+#define S3C2410_BWSCON_DW2_16		(1<<8)
+#define S3C2410_BWSCON_DW2_32		(2<<8)
+#define S3C2410_BWSCON_WS2		(1<<10)
+#define S3C2410_BWSCON_ST2		(1<<11)
+
+/* bank 3 configurations */
+#define S3C2410_BWSCON_DW3_8		(0<<12)
+#define S3C2410_BWSCON_DW3_16		(1<<12)
+#define S3C2410_BWSCON_DW3_32		(2<<12)
+#define S3C2410_BWSCON_WS3		(1<<14)
+#define S3C2410_BWSCON_ST3		(1<<15)
+
+/* bank 4 configurations */
+#define S3C2410_BWSCON_DW4_8		(0<<16)
+#define S3C2410_BWSCON_DW4_16		(1<<16)
+#define S3C2410_BWSCON_DW4_32		(2<<16)
+#define S3C2410_BWSCON_WS4		(1<<18)
+#define S3C2410_BWSCON_ST4		(1<<19)
+
+/* bank 5 configurations */
+#define S3C2410_BWSCON_DW5_8		(0<<20)
+#define S3C2410_BWSCON_DW5_16		(1<<20)
+#define S3C2410_BWSCON_DW5_32		(2<<20)
+#define S3C2410_BWSCON_WS5		(1<<22)
+#define S3C2410_BWSCON_ST5		(1<<23)
+
+/* bank 6 configurations */
+#define S3C2410_BWSCON_DW6_8		(0<<24)
+#define S3C2410_BWSCON_DW6_16		(1<<24)
+#define S3C2410_BWSCON_DW6_32		(2<<24)
+#define S3C2410_BWSCON_WS6		(1<<26)
+#define S3C2410_BWSCON_ST6		(1<<27)
+
+/* bank 7 configurations */
+#define S3C2410_BWSCON_DW7_8		(0<<28)
+#define S3C2410_BWSCON_DW7_16		(1<<28)
+#define S3C2410_BWSCON_DW7_32		(2<<28)
+#define S3C2410_BWSCON_WS7		(1<<30)
+#define S3C2410_BWSCON_ST7		(1<<31)
+
+/* memory set (rom, ram) */
+#define S3C2410_BANKCON0		S3C2410_MEMREG(0x0004)
+#define S3C2410_BANKCON1		S3C2410_MEMREG(0x0008)
+#define S3C2410_BANKCON2		S3C2410_MEMREG(0x000C)
+#define S3C2410_BANKCON3		S3C2410_MEMREG(0x0010)
+#define S3C2410_BANKCON4		S3C2410_MEMREG(0x0014)
+#define S3C2410_BANKCON5		S3C2410_MEMREG(0x0018)
+#define S3C2410_BANKCON6		S3C2410_MEMREG(0x001C)
+#define S3C2410_BANKCON7		S3C2410_MEMREG(0x0020)
+
+/* bank configuration registers */
+
+#define S3C2410_BANKCON_PMCnorm		(0x00)
+#define S3C2410_BANKCON_PMC4		(0x01)
+#define S3C2410_BANKCON_PMC8		(0x02)
+#define S3C2410_BANKCON_PMC16		(0x03)
+
+/* bank configurations for banks 0..7, note banks
+ * 6 and 7 have differnt configurations depending on
+ * the memory type bits */
+
+#define S3C2410_BANKCON_Tacp2		(0x0 << 2)
+#define S3C2410_BANKCON_Tacp3		(0x1 << 2)
+#define S3C2410_BANKCON_Tacp4		(0x2 << 2)
+#define S3C2410_BANKCON_Tacp6		(0x3 << 2)
+#define S3C2410_BANKCON_Tacp_SHIFT	(2)
+
+#define S3C2410_BANKCON_Tcah0		(0x0 << 4)
+#define S3C2410_BANKCON_Tcah1		(0x1 << 4)
+#define S3C2410_BANKCON_Tcah2		(0x2 << 4)
+#define S3C2410_BANKCON_Tcah4		(0x3 << 4)
+#define S3C2410_BANKCON_Tcah_SHIFT	(4)
+
+#define S3C2410_BANKCON_Tcoh0		(0x0 << 6)
+#define S3C2410_BANKCON_Tcoh1		(0x1 << 6)
+#define S3C2410_BANKCON_Tcoh2		(0x2 << 6)
+#define S3C2410_BANKCON_Tcoh4		(0x3 << 6)
+#define S3C2410_BANKCON_Tcoh_SHIFT	(6)
+
+#define S3C2410_BANKCON_Tacc1		(0x0 << 8)
+#define S3C2410_BANKCON_Tacc2		(0x1 << 8)
+#define S3C2410_BANKCON_Tacc3		(0x2 << 8)
+#define S3C2410_BANKCON_Tacc4		(0x3 << 8)
+#define S3C2410_BANKCON_Tacc6		(0x4 << 8)
+#define S3C2410_BANKCON_Tacc8		(0x5 << 8)
+#define S3C2410_BANKCON_Tacc10		(0x6 << 8)
+#define S3C2410_BANKCON_Tacc14		(0x7 << 8)
+#define S3C2410_BANKCON_Tacc_SHIFT	(8)
+
+#define S3C2410_BANKCON_Tcos0		(0x0 << 11)
+#define S3C2410_BANKCON_Tcos1		(0x1 << 11)
+#define S3C2410_BANKCON_Tcos2		(0x2 << 11)
+#define S3C2410_BANKCON_Tcos4		(0x3 << 11)
+#define S3C2410_BANKCON_Tcos_SHIFT	(11)
+
+#define S3C2410_BANKCON_Tacs0		(0x0 << 13)
+#define S3C2410_BANKCON_Tacs1		(0x1 << 13)
+#define S3C2410_BANKCON_Tacs2		(0x2 << 13)
+#define S3C2410_BANKCON_Tacs4		(0x3 << 13)
+#define S3C2410_BANKCON_Tacs_SHIFT	(13)
+
+#define S3C2410_BANKCON_SRAM		(0x0 << 15)
+#define S3C2400_BANKCON_EDODRAM		(0x2 << 15)
+#define S3C2410_BANKCON_SDRAM		(0x3 << 15)
+
+/* next bits only for EDO DRAM in 6,7 */
+#define S3C2400_BANKCON_EDO_Trcd1      (0x00 << 4)
+#define S3C2400_BANKCON_EDO_Trcd2      (0x01 << 4)
+#define S3C2400_BANKCON_EDO_Trcd3      (0x02 << 4)
+#define S3C2400_BANKCON_EDO_Trcd4      (0x03 << 4)
+
+/* CAS pulse width */
+#define S3C2400_BANKCON_EDO_PULSE1     (0x00 << 3)
+#define S3C2400_BANKCON_EDO_PULSE2     (0x01 << 3)
+
+/* CAS pre-charge */
+#define S3C2400_BANKCON_EDO_TCP1       (0x00 << 2)
+#define S3C2400_BANKCON_EDO_TCP2       (0x01 << 2)
+
+/* control column address select */
+#define S3C2400_BANKCON_EDO_SCANb8     (0x00 << 0)
+#define S3C2400_BANKCON_EDO_SCANb9     (0x01 << 0)
+#define S3C2400_BANKCON_EDO_SCANb10    (0x02 << 0)
+#define S3C2400_BANKCON_EDO_SCANb11    (0x03 << 0)
+
+/* next bits only for SDRAM in 6,7 */
+#define S3C2410_BANKCON_Trcd2		(0x00 << 2)
+#define S3C2410_BANKCON_Trcd3		(0x01 << 2)
+#define S3C2410_BANKCON_Trcd4		(0x02 << 2)
+
+/* control column address select */
+#define S3C2410_BANKCON_SCANb8		(0x00 << 0)
+#define S3C2410_BANKCON_SCANb9		(0x01 << 0)
+#define S3C2410_BANKCON_SCANb10		(0x02 << 0)
+
+#define S3C2410_REFRESH			S3C2410_MEMREG(0x0024)
+#define S3C2410_BANKSIZE		S3C2410_MEMREG(0x0028)
+#define S3C2410_MRSRB6			S3C2410_MEMREG(0x002C)
+#define S3C2410_MRSRB7			S3C2410_MEMREG(0x0030)
+
+/* refresh control */
+
+#define S3C2410_REFRESH_REFEN		(1<<23)
+#define S3C2410_REFRESH_SELF		(1<<22)
+#define S3C2410_REFRESH_REFCOUNTER	((1<<11)-1)
+
+#define S3C2410_REFRESH_TRP_MASK	(3<<20)
+#define S3C2410_REFRESH_TRP_2clk	(0<<20)
+#define S3C2410_REFRESH_TRP_3clk	(1<<20)
+#define S3C2410_REFRESH_TRP_4clk	(2<<20)
+
+#define S3C2400_REFRESH_DRAM_TRP_MASK   (3<<20)
+#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20)
+#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20)
+#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20)
+#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20)
+
+#define S3C2410_REFRESH_TSRC_MASK	(3<<18)
+#define S3C2410_REFRESH_TSRC_4clk	(0<<18)
+#define S3C2410_REFRESH_TSRC_5clk	(1<<18)
+#define S3C2410_REFRESH_TSRC_6clk	(2<<18)
+#define S3C2410_REFRESH_TSRC_7clk	(3<<18)
+
+
+/* mode select register(s) */
+
+#define  S3C2410_MRSRB_CL1		(0x00 << 4)
+#define  S3C2410_MRSRB_CL2		(0x02 << 4)
+#define  S3C2410_MRSRB_CL3		(0x03 << 4)
+
+/* bank size register */
+#define S3C2410_BANKSIZE_128M		(0x2 << 0)
+#define S3C2410_BANKSIZE_64M		(0x1 << 0)
+#define S3C2410_BANKSIZE_32M		(0x0 << 0)
+#define S3C2410_BANKSIZE_16M		(0x7 << 0)
+#define S3C2410_BANKSIZE_8M		(0x6 << 0)
+#define S3C2410_BANKSIZE_4M		(0x5 << 0)
+#define S3C2410_BANKSIZE_2M		(0x4 << 0)
+#define S3C2410_BANKSIZE_MASK		(0x7 << 0)
+#define S3C2400_BANKSIZE_MASK           (0x4 << 0)
+#define S3C2410_BANKSIZE_SCLK_EN	(1<<4)
+#define S3C2410_BANKSIZE_SCKE_EN	(1<<5)
+#define S3C2410_BANKSIZE_BURST		(1<<7)
+
+#endif /* __ASM_ARM_MEMREGS_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-power.h b/arch/arm/mach-s3c2410/include/mach/regs-power.h
new file mode 100644
index 000000000000..2d36353f57d7
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-power.h
@@ -0,0 +1,40 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-power.h
+ *
+ * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C24XX power control register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_PWR
+#define __ASM_ARM_REGS_PWR __FILE__
+
+#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2412_PWRMODECON	S3C24XX_PWRREG(0x20)
+#define S3C2412_PWRCFG		S3C24XX_PWRREG(0x24)
+
+#define S3C2412_INFORM0		S3C24XX_PWRREG(0x70)
+#define S3C2412_INFORM1		S3C24XX_PWRREG(0x74)
+#define S3C2412_INFORM2		S3C24XX_PWRREG(0x78)
+#define S3C2412_INFORM3		S3C24XX_PWRREG(0x7C)
+
+#define S3C2412_PWRCFG_BATF_IRQ			(1<<0)
+#define S3C2412_PWRCFG_BATF_IGNORE		(2<<0)
+#define S3C2412_PWRCFG_BATF_SLEEP		(3<<0)
+#define S3C2412_PWRCFG_BATF_MASK		(3<<0)
+
+#define S3C2412_PWRCFG_STANDBYWFI_IGNORE	(0<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_IDLE		(1<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_STOP		(2<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_SLEEP		(3<<6)
+#define S3C2412_PWRCFG_STANDBYWFI_MASK		(3<<6)
+
+#define S3C2412_PWRCFG_RTC_MASKIRQ		(1<<8)
+#define S3C2412_PWRCFG_NAND_NORST		(1<<9)
+
+#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
new file mode 100644
index 000000000000..a4bf27123170
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
@@ -0,0 +1,29 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2412 memory register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2412_MEM
+#define __ASM_ARM_REGS_S3C2412_MEM
+
+#ifndef S3C2412_MEMREG
+#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
+#endif
+
+#define S3C2412_BANKCFG			S3C2412_MEMREG(0x00)
+#define S3C2412_BANKCON1		S3C2412_MEMREG(0x04)
+#define S3C2412_BANKCON2		S3C2412_MEMREG(0x08)
+#define S3C2412_BANKCON3		S3C2412_MEMREG(0x0C)
+
+#define S3C2412_REFRESH			S3C2412_MEMREG(0x10)
+#define S3C2412_TIMEOUT			S3C2412_MEMREG(0x14)
+
+#endif /*  __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
new file mode 100644
index 000000000000..aa69dc79bc38
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
@@ -0,0 +1,23 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
+ *
+ * Copyright 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2412 specific register definitions
+*/
+
+#ifndef __ASM_ARCH_REGS_S3C2412_H
+#define __ASM_ARCH_REGS_S3C2412_H "s3c2412"
+
+#define S3C2412_SWRST		(S3C24XX_VA_CLKPWR + 0x30)
+#define S3C2412_SWRST_RESET	(0x533C2412)
+
+/* see regs-power.h for the other registers in the power block. */
+
+#endif	/* __ASM_ARCH_REGS_S3C2412_H */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
new file mode 100644
index 000000000000..7dd458363a51
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -0,0 +1,195 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2443 clock register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
+#define __ASM_ARM_REGS_S3C2443_CLOCK
+
+#define S3C2443_CLKREG(x)		((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2443_PLLCON_MDIVSHIFT	16
+#define S3C2443_PLLCON_PDIVSHIFT	8
+#define S3C2443_PLLCON_SDIVSHIFT	0
+#define S3C2443_PLLCON_MDIVMASK		((1<<(1+(23-16)))-1)
+#define S3C2443_PLLCON_PDIVMASK		((1<<(1+(9-8)))-1)
+#define S3C2443_PLLCON_SDIVMASK		(3)
+
+#define S3C2443_MPLLCON			S3C2443_CLKREG(0x10)
+#define S3C2443_EPLLCON			S3C2443_CLKREG(0x18)
+#define S3C2443_CLKSRC			S3C2443_CLKREG(0x20)
+#define S3C2443_CLKDIV0			S3C2443_CLKREG(0x24)
+#define S3C2443_CLKDIV1			S3C2443_CLKREG(0x28)
+#define S3C2443_HCLKCON			S3C2443_CLKREG(0x30)
+#define S3C2443_PCLKCON			S3C2443_CLKREG(0x34)
+#define S3C2443_SCLKCON			S3C2443_CLKREG(0x38)
+#define S3C2443_PWRMODE			S3C2443_CLKREG(0x40)
+#define S3C2443_SWRST			S3C2443_CLKREG(0x44)
+#define S3C2443_BUSPRI0			S3C2443_CLKREG(0x50)
+#define S3C2443_SYSID			S3C2443_CLKREG(0x5C)
+#define S3C2443_PWRCFG			S3C2443_CLKREG(0x60)
+#define S3C2443_RSTCON			S3C2443_CLKREG(0x64)
+
+#define S3C2443_SWRST_RESET		(0x533c2443)
+
+#define S3C2443_PLLCON_OFF		(1<<24)
+
+#define S3C2443_CLKSRC_I2S_EXT		(1<<14)
+#define S3C2443_CLKSRC_I2S_EPLLDIV	(0<<14)
+#define S3C2443_CLKSRC_I2S_EPLLREF	(2<<14)
+#define S3C2443_CLKSRC_I2S_EPLLREF3	(3<<14)
+#define S3C2443_CLKSRC_I2S_MASK		(3<<14)
+
+#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<8)
+#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<8)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<8)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<8)
+#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<8)
+
+#define S3C2443_CLKSRC_ESYSCLK_EPLL	(1<<6)
+#define S3C2443_CLKSRC_MSYSCLK_MPLL	(1<<4)
+#define S3C2443_CLKSRC_EXTCLK_DIV	(1<<3)
+
+#define S3C2443_CLKDIV0_DVS		(1<<13)
+#define S3C2443_CLKDIV0_HALF_HCLK	(1<<3)
+#define S3C2443_CLKDIV0_HALF_PCLK	(1<<2)
+
+#define S3C2443_CLKDIV0_HCLKDIV_MASK	(3<<0)
+
+#define S3C2443_CLKDIV0_EXTDIV_MASK	(3<<6)
+#define S3C2443_CLKDIV0_EXTDIV_SHIFT	(6)
+
+#define S3C2443_CLKDIV0_PREDIV_MASK	(3<<4)
+#define S3C2443_CLKDIV0_PREDIV_SHIFT	(4)
+
+#define S3C2443_CLKDIV0_ARMDIV_MASK	(15<<9)
+#define S3C2443_CLKDIV0_ARMDIV_SHIFT	(9)
+#define S3C2443_CLKDIV0_ARMDIV_1	(0<<9)
+#define S3C2443_CLKDIV0_ARMDIV_2	(8<<9)
+#define S3C2443_CLKDIV0_ARMDIV_3	(2<<9)
+#define S3C2443_CLKDIV0_ARMDIV_4	(9<<9)
+#define S3C2443_CLKDIV0_ARMDIV_6	(10<<9)
+#define S3C2443_CLKDIV0_ARMDIV_8	(11<<9)
+#define S3C2443_CLKDIV0_ARMDIV_12	(13<<9)
+#define S3C2443_CLKDIV0_ARMDIV_16	(15<<9)
+
+/* S3C2443_CLKDIV1 */
+
+#define S3C2443_CLKDIV1_CAMDIV_MASK	(15<<26)
+#define S3C2443_CLKDIV1_CAMDIV_SHIFT	(26)
+
+#define S3C2443_CLKDIV1_HSSPIDIV_MASK	(3<<24)
+#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT	(24)
+
+#define S3C2443_CLKDIV1_DISPDIV_MASK	(0xff<<16)
+#define S3C2443_CLKDIV1_DISPDIV_SHIFT	(16)
+
+#define S3C2443_CLKDIV1_I2SDIV_MASK	(15<<12)
+#define S3C2443_CLKDIV1_I2SDIV_SHIFT	(12)
+
+#define S3C2443_CLKDIV1_UARTDIV_MASK	(15<<8)
+#define S3C2443_CLKDIV1_UARTDIV_SHIFT	(8)
+
+#define S3C2443_CLKDIV1_HSMMCDIV_MASK	(3<<6)
+#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT	(6)
+
+#define S3C2443_CLKDIV1_USBHOSTDIV_MASK	(3<<4)
+#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4)
+
+#define S3C2443_CLKCON_NAND
+
+#define S3C2443_HCLKCON_DMA0		(1<<0)
+#define S3C2443_HCLKCON_DMA1		(1<<1)
+#define S3C2443_HCLKCON_DMA2		(1<<2)
+#define S3C2443_HCLKCON_DMA3		(1<<3)
+#define S3C2443_HCLKCON_DMA4		(1<<4)
+#define S3C2443_HCLKCON_DMA5		(1<<5)
+#define S3C2443_HCLKCON_CAMIF		(1<<8)
+#define S3C2443_HCLKCON_DISP		(1<<9)
+#define S3C2443_HCLKCON_LCDC		(1<<10)
+#define S3C2443_HCLKCON_USBH		(1<<11)
+#define S3C2443_HCLKCON_USBD		(1<<12)
+#define S3C2443_HCLKCON_HSMMC		(1<<16)
+#define S3C2443_HCLKCON_CFC		(1<<17)
+#define S3C2443_HCLKCON_SSMC		(1<<18)
+#define S3C2443_HCLKCON_DRAMC		(1<<19)
+
+#define S3C2443_PCLKCON_UART0		(1<<0)
+#define S3C2443_PCLKCON_UART1		(1<<1)
+#define S3C2443_PCLKCON_UART2		(1<<2)
+#define S3C2443_PCLKCON_UART3		(1<<3)
+#define S3C2443_PCLKCON_IIC		(1<<4)
+#define S3C2443_PCLKCON_SDI		(1<<5)
+#define S3C2443_PCLKCON_ADC		(1<<7)
+#define S3C2443_PCLKCON_AC97		(1<<8)
+#define S3C2443_PCLKCON_IIS		(1<<9)
+#define S3C2443_PCLKCON_PWMT		(1<<10)
+#define S3C2443_PCLKCON_WDT		(1<<11)
+#define S3C2443_PCLKCON_RTC		(1<<12)
+#define S3C2443_PCLKCON_GPIO		(1<<13)
+#define S3C2443_PCLKCON_SPI0		(1<<14)
+#define S3C2443_PCLKCON_SPI1		(1<<15)
+
+#define S3C2443_SCLKCON_DDRCLK		(1<<16)
+#define S3C2443_SCLKCON_SSMCCLK		(1<<15)
+#define S3C2443_SCLKCON_HSSPICLK	(1<<14)
+#define S3C2443_SCLKCON_HSMMCCLK_EXT	(1<<13)
+#define S3C2443_SCLKCON_HSMMCCLK_EPLL	(1<<12)
+#define S3C2443_SCLKCON_CAMCLK		(1<<11)
+#define S3C2443_SCLKCON_DISPCLK		(1<<10)
+#define S3C2443_SCLKCON_I2SCLK		(1<<9)
+#define S3C2443_SCLKCON_UARTCLK		(1<<8)
+#define S3C2443_SCLKCON_USBHOST		(1<<1)
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2443_PLLCON_MDIVMASK;
+	pdiv &= S3C2443_PLLCON_PDIVMASK;
+	sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
+	do_div(fvco, pdiv << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+static inline unsigned int
+s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2443_PLLCON_MDIVMASK;
+	pdiv &= S3C2443_PLLCON_PDIVMASK;
+	sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+#endif /*  __ASM_ARM_REGS_S3C2443_CLOCK */
+
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-sdi.h b/arch/arm/mach-s3c2410/include/mach/regs-sdi.h
new file mode 100644
index 000000000000..cbf2d8884e30
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/regs-sdi.h
@@ -0,0 +1,127 @@
+/* arch/arm/mach-s3c2410/include/mach/regs-sdi.h
+ *
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 MMC/SDIO register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_SDI
+#define __ASM_ARM_REGS_SDI "regs-sdi.h"
+
+#define S3C2410_SDICON                (0x00)
+#define S3C2410_SDIPRE                (0x04)
+#define S3C2410_SDICMDARG             (0x08)
+#define S3C2410_SDICMDCON             (0x0C)
+#define S3C2410_SDICMDSTAT            (0x10)
+#define S3C2410_SDIRSP0               (0x14)
+#define S3C2410_SDIRSP1               (0x18)
+#define S3C2410_SDIRSP2               (0x1C)
+#define S3C2410_SDIRSP3               (0x20)
+#define S3C2410_SDITIMER              (0x24)
+#define S3C2410_SDIBSIZE              (0x28)
+#define S3C2410_SDIDCON               (0x2C)
+#define S3C2410_SDIDCNT               (0x30)
+#define S3C2410_SDIDSTA               (0x34)
+#define S3C2410_SDIFSTA               (0x38)
+
+#define S3C2410_SDIDATA               (0x3C)
+#define S3C2410_SDIIMSK               (0x40)
+
+#define S3C2440_SDIDATA               (0x40)
+#define S3C2440_SDIIMSK               (0x3C)
+
+#define S3C2440_SDICON_SDRESET        (1<<8)
+#define S3C2440_SDICON_MMCCLOCK       (1<<5)
+#define S3C2410_SDICON_BYTEORDER      (1<<4)
+#define S3C2410_SDICON_SDIOIRQ        (1<<3)
+#define S3C2410_SDICON_RWAITEN        (1<<2)
+#define S3C2410_SDICON_FIFORESET      (1<<1)
+#define S3C2410_SDICON_CLOCKTYPE      (1<<0)
+
+#define S3C2410_SDICMDCON_ABORT       (1<<12)
+#define S3C2410_SDICMDCON_WITHDATA    (1<<11)
+#define S3C2410_SDICMDCON_LONGRSP     (1<<10)
+#define S3C2410_SDICMDCON_WAITRSP     (1<<9)
+#define S3C2410_SDICMDCON_CMDSTART    (1<<8)
+#define S3C2410_SDICMDCON_SENDERHOST  (1<<6)
+#define S3C2410_SDICMDCON_INDEX       (0x3f)
+
+#define S3C2410_SDICMDSTAT_CRCFAIL    (1<<12)
+#define S3C2410_SDICMDSTAT_CMDSENT    (1<<11)
+#define S3C2410_SDICMDSTAT_CMDTIMEOUT (1<<10)
+#define S3C2410_SDICMDSTAT_RSPFIN     (1<<9)
+#define S3C2410_SDICMDSTAT_XFERING    (1<<8)
+#define S3C2410_SDICMDSTAT_INDEX      (0xff)
+
+#define S3C2440_SDIDCON_DS_BYTE       (0<<22)
+#define S3C2440_SDIDCON_DS_HALFWORD   (1<<22)
+#define S3C2440_SDIDCON_DS_WORD       (2<<22)
+#define S3C2410_SDIDCON_IRQPERIOD     (1<<21)
+#define S3C2410_SDIDCON_TXAFTERRESP   (1<<20)
+#define S3C2410_SDIDCON_RXAFTERCMD    (1<<19)
+#define S3C2410_SDIDCON_BUSYAFTERCMD  (1<<18)
+#define S3C2410_SDIDCON_BLOCKMODE     (1<<17)
+#define S3C2410_SDIDCON_WIDEBUS       (1<<16)
+#define S3C2410_SDIDCON_DMAEN         (1<<15)
+#define S3C2410_SDIDCON_STOP          (1<<14)
+#define S3C2440_SDIDCON_DATSTART      (1<<14)
+#define S3C2410_SDIDCON_DATMODE	      (3<<12)
+#define S3C2410_SDIDCON_BLKNUM        (0x7ff)
+
+/* constants for S3C2410_SDIDCON_DATMODE */
+#define S3C2410_SDIDCON_XFER_READY    (0<<12)
+#define S3C2410_SDIDCON_XFER_CHKSTART (1<<12)
+#define S3C2410_SDIDCON_XFER_RXSTART  (2<<12)
+#define S3C2410_SDIDCON_XFER_TXSTART  (3<<12)
+
+#define S3C2410_SDIDCON_BLKNUM_MASK   (0xFFF)
+#define S3C2410_SDIDCNT_BLKNUM_SHIFT  (12)
+
+#define S3C2410_SDIDSTA_RDYWAITREQ    (1<<10)
+#define S3C2410_SDIDSTA_SDIOIRQDETECT (1<<9)
+#define S3C2410_SDIDSTA_FIFOFAIL      (1<<8)	/* reserved on 2440 */
+#define S3C2410_SDIDSTA_CRCFAIL       (1<<7)
+#define S3C2410_SDIDSTA_RXCRCFAIL     (1<<6)
+#define S3C2410_SDIDSTA_DATATIMEOUT   (1<<5)
+#define S3C2410_SDIDSTA_XFERFINISH    (1<<4)
+#define S3C2410_SDIDSTA_BUSYFINISH    (1<<3)
+#define S3C2410_SDIDSTA_SBITERR       (1<<2)	/* reserved on 2410a/2440 */
+#define S3C2410_SDIDSTA_TXDATAON      (1<<1)
+#define S3C2410_SDIDSTA_RXDATAON      (1<<0)
+
+#define S3C2440_SDIFSTA_FIFORESET      (1<<16)
+#define S3C2440_SDIFSTA_FIFOFAIL       (3<<14)  /* 3 is correct (2 bits) */
+#define S3C2410_SDIFSTA_TFDET          (1<<13)
+#define S3C2410_SDIFSTA_RFDET          (1<<12)
+#define S3C2410_SDIFSTA_TFHALF         (1<<11)
+#define S3C2410_SDIFSTA_TFEMPTY        (1<<10)
+#define S3C2410_SDIFSTA_RFLAST         (1<<9)
+#define S3C2410_SDIFSTA_RFFULL         (1<<8)
+#define S3C2410_SDIFSTA_RFHALF         (1<<7)
+#define S3C2410_SDIFSTA_COUNTMASK      (0x7f)
+
+#define S3C2410_SDIIMSK_RESPONSECRC    (1<<17)
+#define S3C2410_SDIIMSK_CMDSENT        (1<<16)
+#define S3C2410_SDIIMSK_CMDTIMEOUT     (1<<15)
+#define S3C2410_SDIIMSK_RESPONSEND     (1<<14)
+#define S3C2410_SDIIMSK_READWAIT       (1<<13)
+#define S3C2410_SDIIMSK_SDIOIRQ        (1<<12)
+#define S3C2410_SDIIMSK_FIFOFAIL       (1<<11)
+#define S3C2410_SDIIMSK_CRCSTATUS      (1<<10)
+#define S3C2410_SDIIMSK_DATACRC        (1<<9)
+#define S3C2410_SDIIMSK_DATATIMEOUT    (1<<8)
+#define S3C2410_SDIIMSK_DATAFINISH     (1<<7)
+#define S3C2410_SDIIMSK_BUSYFINISH     (1<<6)
+#define S3C2410_SDIIMSK_SBITERR        (1<<5)	/* reserved 2440/2410a */
+#define S3C2410_SDIIMSK_TXFIFOHALF     (1<<4)
+#define S3C2410_SDIIMSK_TXFIFOEMPTY    (1<<3)
+#define S3C2410_SDIIMSK_RXFIFOLAST     (1<<2)
+#define S3C2410_SDIIMSK_RXFIFOFULL     (1<<1)
+#define S3C2410_SDIIMSK_RXFIFOHALF     (1<<0)
+
+#endif /* __ASM_ARM_REGS_SDI */
diff --git a/arch/arm/mach-s3c2410/include/mach/reset.h b/arch/arm/mach-s3c2410/include/mach/reset.h
new file mode 100644
index 000000000000..f8c9387b049d
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/reset.h
@@ -0,0 +1,22 @@
+/* arch/arm/mach-s3c2410/include/mach/reset.h
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 CPU reset controls
+*/
+
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H __FILE__
+
+/* This allows the over-ride of the default reset code
+*/
+
+extern void (*s3c24xx_reset_hook)(void);
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
new file mode 100644
index 000000000000..3fe8be9ca110
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h
@@ -0,0 +1,27 @@
+/* arch/arm/mach-s3c2410/include/mach/spi-gpio.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platfrom_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPIGPIO_H
+#define __ASM_ARCH_SPIGPIO_H __FILE__
+
+struct s3c2410_spigpio_info {
+	unsigned long		 pin_clk;
+	unsigned long		 pin_mosi;
+	unsigned long		 pin_miso;
+
+	int			 bus_num;
+
+	void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs);
+};
+
+
+#endif /* __ASM_ARCH_SPIGPIO_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
new file mode 100644
index 000000000000..921b13b4f0a0
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -0,0 +1,25 @@
+/* arch/arm/mach-s3c2410/include/mach/spi.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - SPI Controller platform_device info
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_SPI_H
+#define __ASM_ARCH_SPI_H __FILE__
+
+struct s3c2410_spi_info {
+	unsigned long		 pin_cs;	/* simple gpio cs */
+	unsigned int		 num_cs;	/* total chipselects */
+	int			 bus_num;       /* bus number to use. */
+
+	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
+};
+
+
+#endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h
new file mode 100644
index 000000000000..ec2defebf0d5
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h
@@ -0,0 +1,64 @@
+/* arch/arm/mach-s3c2410/include/mach/system-reset.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System define for arch_reset() function
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <asm/plat-s3c/regs-watchdog.h>
+#include <mach/regs-clock.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+
+extern void (*s3c24xx_reset_hook)(void);
+
+static void
+arch_reset(char mode)
+{
+	struct clk *wdtclk;
+
+	if (mode == 's') {
+		cpu_reset(0);
+	}
+
+	if (s3c24xx_reset_hook)
+		s3c24xx_reset_hook();
+
+	printk("arch_reset: attempting watchdog reset\n");
+
+	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
+
+	wdtclk = clk_get(NULL, "watchdog");
+	if (!IS_ERR(wdtclk)) {
+		clk_enable(wdtclk);
+	} else
+		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+
+	/* put initial values into count and data */
+	__raw_writel(0x80, S3C2410_WTCNT);
+	__raw_writel(0x80, S3C2410_WTDAT);
+
+	/* set the watchdog to go and reset... */
+	__raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
+		     S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
+
+	/* wait for reset to assert... */
+	mdelay(500);
+
+	printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+	/* delay to allow the serial port to show the message */
+	mdelay(50);
+
+	/* we'll take a jump through zero as a poor second */
+	cpu_reset(0);
+}
diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h
new file mode 100644
index 000000000000..e9f676bc0116
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/system.h
@@ -0,0 +1,58 @@
+/* arch/arm/mach-s3c2410/include/mach/system.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System function defines and includes
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+
+#include <mach/map.h>
+#include <mach/idle.h>
+#include <mach/reset.h>
+
+#include <mach/regs-clock.h>
+
+void (*s3c24xx_idle)(void);
+void (*s3c24xx_reset_hook)(void);
+
+void s3c24xx_default_idle(void)
+{
+	unsigned long tmp;
+	int i;
+
+	/* idle the system by using the idle mode which will wait for an
+	 * interrupt to happen before restarting the system.
+	 */
+
+	/* Warning: going into idle state upsets jtag scanning */
+
+	__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
+
+	/* the samsung port seems to do a loop and then unset idle.. */
+	for (i = 0; i < 50; i++) {
+		tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
+	}
+
+	/* this bit is not cleared on re-start... */
+
+	__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
+}
+
+static void arch_idle(void)
+{
+	if (s3c24xx_idle != NULL)
+		(s3c24xx_idle)();
+	else
+		s3c24xx_default_idle();
+}
+
+#include <mach/system-reset.h>
diff --git a/arch/arm/mach-s3c2410/include/mach/timex.h b/arch/arm/mach-s3c2410/include/mach/timex.h
new file mode 100644
index 000000000000..2a425ed0a7e0
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/timex.h
@@ -0,0 +1,26 @@
+/* arch/arm/mach-s3c2410/include/mach/timex.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - time parameters
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it
+ * a variable is useless. It seems as long as we make our timers an
+ * exact multiple of HZ, any value that makes a 1->1 correspondence
+ * for the time conversion functions to/from jiffies is acceptable.
+*/
+
+
+#define CLOCK_TICK_RATE 12000000
+
+
+#endif /* __ASM_ARCH_TIMEX_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
new file mode 100644
index 000000000000..708e47459ffc
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -0,0 +1,52 @@
+/* arch/arm/mach-s3c2410/include/mach/uncompress.h
+ *
+ * Copyright (c) 2003, 2007 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - uncompress code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <mach/regs-gpio.h>
+#include <mach/map.h>
+
+/* working in physical space... */
+#undef S3C2410_GPIOREG
+#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
+
+#include <asm/plat-s3c/uncompress.h>
+
+static inline int is_arm926(void)
+{
+	unsigned int cpuid;
+
+	asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid));
+
+	return ((cpuid & 0xff0) == 0x260);
+}
+
+static void arch_detect_cpu(void)
+{
+	unsigned int cpuid;
+
+	cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
+	cpuid &= S3C2410_GSTATUS1_IDMASK;
+
+	if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
+	    cpuid == S3C2410_GSTATUS1_2442) {
+		fifo_mask = S3C2440_UFSTAT_TXMASK;
+		fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
+	} else {
+		fifo_mask = S3C2410_UFSTAT_TXMASK;
+		fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT;
+	}
+}
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/usb-control.h b/arch/arm/mach-s3c2410/include/mach/usb-control.h
new file mode 100644
index 000000000000..cd91d1591f31
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/usb-control.h
@@ -0,0 +1,41 @@
+/* arch/arm/mach-s3c2410/include/mach/usb-control.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - usb port information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_USBCONTROL_H
+#define __ASM_ARCH_USBCONTROL_H "arch/arm/mach-s3c2410/include/mach/usb-control.h"
+
+#define S3C_HCDFLG_USED	(1)
+
+struct s3c2410_hcd_port {
+	unsigned char	flags;
+	unsigned char	power;
+	unsigned char	oc_status;
+	unsigned char	oc_changed;
+};
+
+struct s3c2410_hcd_info {
+	struct usb_hcd		*hcd;
+	struct s3c2410_hcd_port	port[2];
+
+	void		(*power_control)(int port, int to);
+	void		(*enable_oc)(struct s3c2410_hcd_info *, int on);
+	void		(*report_oc)(struct s3c2410_hcd_info *, int ports);
+};
+
+static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports)
+{
+	if (info->report_oc != NULL) {
+		(info->report_oc)(info, ports);
+	}
+}
+
+#endif /*__ASM_ARCH_USBCONTROL_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
new file mode 100644
index 000000000000..315b0078a34d
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/* arch/arm/mach-s3c2410/include/mach/vmalloc.h
+ *
+ * from arch/arm/mach-iop3xx/include/mach/vmalloc.h
+ *
+ * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk>
+ *		      http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 vmalloc definition
+*/
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END	  (0xE0000000)
+
+#endif /* __ASM_ARCH_VMALLOC_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h b/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
new file mode 100644
index 000000000000..e4119913d7c5
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
@@ -0,0 +1,18 @@
+/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * VR1000 - CPLD control constants
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_VR1000CPLD_H
+#define __ASM_ARCH_VR1000CPLD_H
+
+#define VR1000_CPLD_CTRL2_RAMWEN     (0x04)   /* SRAM Write Enable */
+
+#endif /* __ASM_ARCH_VR1000CPLD_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
new file mode 100644
index 000000000000..f53f85b4ad8b
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
@@ -0,0 +1,26 @@
+/* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
+ *
+ * Copyright (c) 2003,2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine VR1000 - IRQ Number definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_VR1000IRQ_H
+#define __ASM_ARCH_VR1000IRQ_H
+
+/* irq numbers to onboard peripherals */
+
+#define IRQ_USBOC	     IRQ_EINT19
+#define IRQ_IDE0	     IRQ_EINT16
+#define IRQ_IDE1	     IRQ_EINT17
+#define IRQ_VR1000_SERIAL    IRQ_EINT12
+#define IRQ_VR1000_DM9000A   IRQ_EINT10
+#define IRQ_VR1000_DM9000N   IRQ_EINT9
+#define IRQ_SMALERT	     IRQ_EINT8
+
+#endif /* __ASM_ARCH_VR1000IRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-map.h b/arch/arm/mach-s3c2410/include/mach/vr1000-map.h
new file mode 100644
index 000000000000..99612fcc4eb2
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-map.h
@@ -0,0 +1,110 @@
+/* arch/arm/mach-s3c2410/include/mach/vr1000-map.h
+ *
+ * Copyright (c) 2003-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Machine VR1000 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* needs arch/map.h including with this */
+
+/* ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#ifndef __ASM_ARCH_VR1000MAP_H
+#define __ASM_ARCH_VR1000MAP_H
+
+#include <mach/bast-map.h>
+
+#define VR1000_IOADDR(x) BAST_IOADDR(x)
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define VR1000_VA_CTRL1	    VR1000_IOADDR(0x00000000)	 /* 0x01300000 */
+#define VR1000_PA_CTRL1	    (S3C2410_CS5 | 0x7800000)
+
+#define VR1000_VA_CTRL2	    VR1000_IOADDR(0x00100000)	 /* 0x01400000 */
+#define VR1000_PA_CTRL2	    (S3C2410_CS1 | 0x6000000)
+
+#define VR1000_VA_CTRL3	    VR1000_IOADDR(0x00200000)	 /* 0x01500000 */
+#define VR1000_PA_CTRL3	    (S3C2410_CS1 | 0x6800000)
+
+#define VR1000_VA_CTRL4	    VR1000_IOADDR(0x00300000)	 /* 0x01600000 */
+#define VR1000_PA_CTRL4	    (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define VR1000_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define VR1000_VA_PC104_IRQREQ  VR1000_IOADDR(0x00400000)
+
+#define VR1000_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define VR1000_VA_PC104_IRQRAW  VR1000_IOADDR(0x00500000)
+
+#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
+
+/* 0xE0000000 contains the IO space that is split by speed and
+ * wether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000  8bit,  slow
+ * 0x04000000 to 0x08000000  16bit, slow
+ * 0x08000000 to 0x0C000000  16bit, net
+ * 0x0C000000 to 0x10000000  16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x02000000 to 0x02100000 1MB  IDE primary channel
+ * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB  IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
+ * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controllers
+ * 0x02600000 to 0x02700000 1MB
+ *
+ * the phyiscal layout of the zones are:
+ *  nGCS2 - 8bit, slow
+ *  nGCS3 - 16bit, slow
+ *  nGCS4 - 16bit, net
+ *  nGCS5 - 16bit, fast
+ */
+
+#define VR1000_VA_MULTISPACE (0xE0000000)
+
+#define VR1000_VA_ISAIO		   (VR1000_VA_MULTISPACE + 0x00000000)
+#define VR1000_VA_ISAMEM	   (VR1000_VA_MULTISPACE + 0x01000000)
+#define VR1000_VA_IDEPRI	   (VR1000_VA_MULTISPACE + 0x02000000)
+#define VR1000_VA_IDEPRIAUX	   (VR1000_VA_MULTISPACE + 0x02100000)
+#define VR1000_VA_IDESEC	   (VR1000_VA_MULTISPACE + 0x02200000)
+#define VR1000_VA_IDESECAUX	   (VR1000_VA_MULTISPACE + 0x02300000)
+#define VR1000_VA_ASIXNET	   (VR1000_VA_MULTISPACE + 0x02400000)
+#define VR1000_VA_DM9000	   (VR1000_VA_MULTISPACE + 0x02500000)
+#define VR1000_VA_SUPERIO	   (VR1000_VA_MULTISPACE + 0x02600000)
+
+/* physical offset addresses for the peripherals */
+
+#define VR1000_PA_IDEPRI	   (0x02000000)
+#define VR1000_PA_IDEPRIAUX	   (0x02800000)
+#define VR1000_PA_IDESEC	   (0x03000000)
+#define VR1000_PA_IDESECAUX	   (0x03800000)
+#define VR1000_PA_DM9000	   (0x05000000)
+
+#define VR1000_PA_SERIAL	   (0x11800000)
+#define VR1000_VA_SERIAL	   (VR1000_IOADDR(0x00700000))
+
+/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
+#define VR1000_PA_SRAM		   (S3C2410_CS1 | 0x05000000)
+
+/* some configurations for the peripherals */
+
+#define VR1000_DM9000_CS	 VR1000_VAM_CS4
+
+#endif /* __ASM_ARCH_VR1000MAP_H */
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index a67a0685664d..f0de3c23ce78 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -42,15 +42,15 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/devs.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 5c289c3a4378..24c6334fac89 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -29,24 +29,24 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-#include <asm/arch/bast-cpld.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+#include <mach/bast-cpld.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c/iic.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 7c1145e87c12..e35933a46d10 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -25,19 +25,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
 
-#include <asm/arch/h1940.h>
-#include <asm/arch/h1940-latch.h>
-#include <asm/arch/fb.h>
+#include <mach/h1940.h>
+#include <mach/h1940-latch.h>
+#include <mach/fb.h>
 #include <asm/plat-s3c24xx/udc.h>
 
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 43c2e915c5bf..80fe2ed0775c 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -26,15 +26,15 @@
 #include <linux/serial_core.h>
 #include <linux/timer.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/fb.h>
-#include <asm/arch/leds-gpio.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/fb.h>
+#include <mach/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 717af40e4477..606ee15911b6 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -22,15 +22,15 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/otom-map.h>
+#include <mach/otom-map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index a1caf4b0adac..7d34844debde 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -42,19 +42,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c24xx/udc.h>
-#include <asm/arch/spi.h>
-#include <asm/arch/spi-gpio.h>
+#include <mach/spi.h>
+#include <mach/spi-gpio.h>
 
 #include <asm/plat-s3c24xx/common-smdk.h>
 #include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index 226550504c85..c9040080727e 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -42,7 +42,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index d90d445ccfb4..ec87306a8c24 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -39,7 +39,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 7be0bb629bfa..fbc0213d5485 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -30,19 +30,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/bast-map.h>
-#include <asm/arch/vr1000-map.h>
-#include <asm/arch/vr1000-irq.h>
-#include <asm/arch/vr1000-cpld.h>
+#include <mach/bast-map.h>
+#include <mach/vr1000-map.h>
+#include <mach/vr1000-irq.h>
+#include <mach/vr1000-cpld.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-s3c2410/nor-simtec.c b/arch/arm/mach-s3c2410/nor-simtec.c
index f44e21b9c3ba..b2ae237042a5 100644
--- a/arch/arm/mach-s3c2410/nor-simtec.c
+++ b/arch/arm/mach-s3c2410/nor-simtec.c
@@ -26,9 +26,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/map.h>
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-cpld.h>
+#include <mach/map.h>
+#include <mach/bast-map.h>
+#include <mach/bast-cpld.h>
 
 
 static void simtec_nor_vpp(struct map_info *map, int vpp)
diff --git a/arch/arm/mach-s3c2410/pm-h1940.S b/arch/arm/mach-s3c2410/pm-h1940.S
index 7d66de7ff7db..c93bf2db9f4d 100644
--- a/arch/arm/mach-s3c2410/pm-h1940.S
+++ b/arch/arm/mach-s3c2410/pm-h1940.S
@@ -20,10 +20,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 	.text
 	.global	h1940_pm_return
diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index 3b3a7db4e0dd..ba43ff9e8164 100644
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -26,13 +26,13 @@
 #include <linux/time.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/mach-types.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/h1940.h>
+#include <mach/regs-gpio.h>
+#include <mach/h1940.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 0e7991940f81..5d977f9c88ac 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -24,11 +24,11 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 8a9c5a2bb252..be37f221a177 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -26,12 +26,12 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-mem.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 	/* s3c2410_cpu_suspend
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 6aec86a5da56..4dacf8a1750d 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -26,12 +26,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/bast-map.h>
-#include <asm/arch/bast-irq.h>
-#include <asm/arch/usb-control.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+#include <mach/usb-control.h>
+#include <mach/regs-gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 1157b5a16263..af4b2ce516f9 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -34,12 +34,12 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/s3c2412.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c
index 1dd864993566..22fc04a3b533 100644
--- a/arch/arm/mach-s3c2412/dma.c
+++ b/arch/arm/mach-s3c2412/dma.c
@@ -18,18 +18,18 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 #include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-s3c2412-iis.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
index 8e55c3a2eab8..f7afece7fc38 100644
--- a/arch/arm/mach-s3c2412/gpio.c
+++ b/arch/arm/mach-s3c2412/gpio.c
@@ -20,9 +20,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
 {
diff --git a/arch/arm/mach-s3c2412/irq.c b/arch/arm/mach-s3c2412/irq.c
index cc1917bf952a..ac62b79044f4 100644
--- a/arch/arm/mach-s3c2412/irq.c
+++ b/arch/arm/mach-s3c2412/irq.c
@@ -25,15 +25,15 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-power.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-power.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/irq.h>
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 7f5924713485..30f613a79bfe 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -37,12 +37,12 @@
 #include <asm/plat-s3c/nand.h>
 #include <asm/plat-s3c/iic.h>
 
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/spi-gpio.h>
-#include <asm/arch/fb.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/spi-gpio.h>
+#include <mach/fb.h>
 
 #include <asm/mach-types.h>
 
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index b126a530daa6..80affb1ee4cd 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -24,7 +24,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iomd.h>
 #include <asm/setup.h>
 #include <asm/io.h>
@@ -33,12 +33,12 @@
 
 //#include <asm/debug-ll.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
+#include <mach/idle.h>
 #include <asm/plat-s3c24xx/udc.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2412.h>
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 32982547cd63..7a08b3789915 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -27,18 +27,18 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c/nand.h>
 
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index d4ffb2d98076..737523a4e037 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -19,14 +19,14 @@
 #include <linux/sysdev.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-dsc.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index 98a0de924c22..d278010b9f60 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -25,22 +25,22 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/proc-fns.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/reset.h>
-#include <asm/arch/idle.h>
+#include <mach/reset.h>
+#include <mach/idle.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-power.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-power.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
-#include <asm/arch/regs-s3c2412.h>
+#include <mach/regs-s3c2412.h>
 
 #include <asm/plat-s3c24xx/s3c2412.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2412/sleep.S b/arch/arm/mach-s3c2412/sleep.S
index db32cac4199a..c82418ed714d 100644
--- a/arch/arm/mach-s3c2412/sleep.S
+++ b/arch/arm/mach-s3c2412/sleep.S
@@ -22,10 +22,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-irq.h>
 
 	.text
 
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index 184d804934c9..95567e6daea1 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -34,12 +34,12 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c
index 0b1260827ac6..cdd4e6e79ac0 100644
--- a/arch/arm/mach-s3c2440/dma.c
+++ b/arch/arm/mach-s3c2440/dma.c
@@ -18,17 +18,17 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 #include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
index 2995ff5681bb..c0c67438d0a4 100644
--- a/arch/arm/mach-s3c2440/dsc.c
+++ b/arch/arm/mach-s3c2440/dsc.c
@@ -20,12 +20,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-dsc.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index a87608bc1a03..276b823f4e27 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 0c33a932d65c..441f4bc09472 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -27,19 +27,19 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/anubis-map.h>
-#include <asm/arch/anubis-irq.h>
-#include <asm/arch/anubis-cpld.h>
+#include <mach/anubis-map.h>
+#include <mach/anubis-irq.h>
+#include <mach/anubis-cpld.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 #include <asm/plat-s3c/nand.h>
 
 #include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index f5e3c7f27639..f0f0cc6afcf4 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -27,14 +27,14 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 #include <asm/plat-s3c/nand.h>
 
 #include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index afe0d7b7e389..1a5e7027b41b 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -29,13 +29,13 @@
 #include <asm/mach/irq.h>
 
 #include <asm/setup.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 //#include <asm/debug-ll.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 3869ca2c345e..8b83f93b6102 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -25,18 +25,18 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/osiris-map.h>
-#include <asm/arch/osiris-cpld.h>
+#include <mach/osiris-map.h>
+#include <mach/osiris-cpld.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
 #include <asm/plat-s3c/nand.h>
 
 #include <linux/mtd/mtd.h>
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index bac40c4878a5..e0b07e6a0a18 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -33,18 +33,18 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/h1940.h>
+#include <mach/h1940.h>
 #include <asm/plat-s3c/nand.h>
-#include <asm/arch/fb.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 4552828bf800..327c8f371984 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -26,17 +26,17 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 90e1da61fbc3..d6b9a92d284e 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -25,7 +25,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/mach-s3c2442/clock.c b/arch/arm/mach-s3c2442/clock.c
index 2d030d439fe9..569b5c3d334a 100644
--- a/arch/arm/mach-s3c2442/clock.c
+++ b/arch/arm/mach-s3c2442/clock.c
@@ -34,12 +34,12 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 17f064fabdaf..6a8d7cced4a2 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -34,10 +34,10 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-s3c2443-clock.h>
+#include <mach/regs-s3c2443-clock.h>
 
 #include <asm/plat-s3c24xx/s3c2443.h>
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c
index f6c006d4297b..c1ff03aebfda 100644
--- a/arch/arm/mach-s3c2443/dma.c
+++ b/arch/arm/mach-s3c2443/dma.c
@@ -18,18 +18,18 @@
 #include <linux/serial_core.h>
 
 #include <asm/dma.h>
-#include <asm/arch/dma.h>
+#include <mach/dma.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 #include <asm/plat-s3c24xx/cpu.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-ac97.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-lcd.h>
-#include <asm/arch/regs-sdi.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-lcd.h>
+#include <mach/regs-sdi.h>
 #include <asm/plat-s3c24xx/regs-iis.h>
 #include <asm/plat-s3c24xx/regs-spi.h>
 
diff --git a/arch/arm/mach-s3c2443/irq.c b/arch/arm/mach-s3c2443/irq.c
index f9ad498a6fc0..9674de7223fd 100644
--- a/arch/arm/mach-s3c2443/irq.c
+++ b/arch/arm/mach-s3c2443/irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 8cd93130ef36..e3c0d587bd10 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -26,17 +26,17 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-lcd.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <asm/arch/idle.h>
-#include <asm/arch/fb.h>
+#include <mach/idle.h>
+#include <mach/fb.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index 9ce490560af9..37793f924b5e 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -25,12 +25,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-s3c2443-clock.h>
-#include <asm/arch/reset.h>
+#include <mach/regs-s3c2443-clock.h>
+#include <mach/reset.h>
 
 #include <asm/plat-s3c24xx/s3c2443.h>
 #include <asm/plat-s3c24xx/devs.h>
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 8e0244631d65..8a5546e6d547 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -46,9 +46,6 @@ led-$(CONFIG_SA1100_SIMPAD)		+= leds-simpad.o
 # LEDs support
 obj-$(CONFIG_LEDS) += $(led-y)
 
-# SA1110 USB client support
-#obj-$(CONFIG_SA1100_USB)		+= usb/
-
 # Miscelaneous functions
 obj-$(CONFIG_PM)			+= pm.o sleep.o
 obj-$(CONFIG_SA1100_SSP)		+= ssp.o
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index be06d668a3c9..55e64477a876 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -20,7 +20,7 @@
 #include <linux/delay.h>
 #include <linux/mm.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -34,8 +34,8 @@
 #include <asm/mach/irda.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/mcp.h>
+#include <mach/assabet.h>
+#include <mach/mcp.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index 842d9e6dc5ff..3efefbdd2527 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -23,10 +23,10 @@
 #include <linux/mtd/partitions.h>
 #include <linux/errno.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -34,7 +34,7 @@
 #include <asm/hardware/sa1111.h>
 #include <asm/mach/serial_sa1100.h>
 
-#include <asm/arch/badge4.h>
+#include <mach/badge4.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 31afe50d7cd5..fd3ad9cfc912 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 
 #include <asm/mach-types.h>
@@ -28,8 +28,8 @@
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 
-#include <asm/arch/cerf.h>
-#include <asm/arch/mcp.h>
+#include <mach/cerf.h>
+#include <mach/mcp.h>
 #include "generic.h"
 
 static struct resource cerfuart2_resources[] = {
@@ -96,7 +96,7 @@ static struct resource cerf_flash_resource = {
 static void __init cerf_init_irq(void)
 {
 	sa1100_init_irq();
-	set_irq_type(CERF_ETH_IRQ, IRQT_RISING);
+	set_irq_type(CERF_ETH_IRQ, IRQ_TYPE_EDGE_RISING);
 }
 
 static struct map_desc cerf_io_desc[] __initdata = {
diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c
index fc97fe57ee6f..43c30f84abf2 100644
--- a/arch/arm/mach-sa1100/clock.c
+++ b/arch/arm/mach-sa1100/clock.c
@@ -11,7 +11,7 @@
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Very simple clock implementation - we only have one clock to
@@ -103,7 +103,7 @@ static void clk_gpio27_disable(void)
 }
 
 static struct clk clk_gpio27 = {
-	.name		= "GPIO27_CLK",
+	.name		= "SA1111_CLK",
 	.rate		= 3686400,
 	.enable		= clk_gpio27_enable,
 	.disable	= clk_gpio27_disable,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 2f772a3965c4..fe289997cfaf 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -26,11 +26,11 @@
 #include <linux/mtd/partitions.h>
 #include <linux/timer.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -40,7 +40,7 @@
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/locomo.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/collie_pm.c b/arch/arm/mach-sa1100/collie_pm.c
index 94620be7bfac..b1161fc80602 100644
--- a/arch/arm/mach-sa1100/collie_pm.c
+++ b/arch/arm/mach-sa1100/collie_pm.c
@@ -24,11 +24,10 @@
 #include <linux/platform_device.h>
 
 #include <asm/irq.h>
-#include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/scoop.h>
 #include <asm/dma.h>
-#include <asm/arch/collie.h>
+#include <mach/collie.h>
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/sharpsl_pm.h>
 
diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c
index 343368aa82de..da3a898a6d66 100644
--- a/arch/arm/mach-sa1100/cpu-sa1100.c
+++ b/arch/arm/mach-sa1100/cpu-sa1100.c
@@ -88,7 +88,7 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c
index 36b47ff5af11..39d38c801736 100644
--- a/arch/arm/mach-sa1100/cpu-sa1110.c
+++ b/arch/arm/mach-sa1100/cpu-sa1110.c
@@ -26,7 +26,7 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/io.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index e5080286060e..f990a3e85846 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -18,7 +18,7 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
 
@@ -76,7 +76,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
  * 	address of the hardware registers for that channel as the channel
  * 	identifier. This identifier is written to the location pointed by
  * 	@dma_regs. The list of possible values for @device are listed into
- * 	linux/include/asm-arm/arch-sa1100/dma.h as a dma_device_t enum.
+ * 	arch/arm/mach-sa1100/include/mach/dma.h as a dma_device_t enum.
  *
  * 	Note that reading from a port and writing to the same port are
  * 	actually considered as two different streams requiring separate
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 0c2fa1c4fb4c..1362994c78aa 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -21,7 +21,7 @@
 
 #include <asm/div64.h>
 #include <asm/cnt32_to_63.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
@@ -31,6 +31,9 @@
 
 #include "generic.h"
 
+unsigned int reset_status;
+EXPORT_SYMBOL(reset_status);
+
 #define NR_FREQS	16
 
 /*
diff --git a/arch/arm/mach-sa1100/gpio.c b/arch/arm/mach-sa1100/gpio.c
index 372f1f4f54a1..0d3829a8c2c1 100644
--- a/arch/arm/mach-sa1100/gpio.c
+++ b/arch/arm/mach-sa1100/gpio.c
@@ -12,7 +12,7 @@
 #include <linux/module.h>
 
 #include <asm/gpio.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include "generic.h"
 
 static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 8473c37b77d6..af25a78d705d 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -30,7 +30,7 @@
 #include <linux/serial_core.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 
@@ -41,14 +41,14 @@
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
 
-#include <asm/arch/h3600.h>
+#include <mach/h3600.h>
 
 #if defined (CONFIG_SA1100_H3600) || defined (CONFIG_SA1100_H3100)
-#include <asm/arch/h3600_gpio.h>
+#include <mach/h3600_gpio.h>
 #endif
 
 #ifdef CONFIG_SA1100_H3800
-#include <asm/arch/h3600_asic.h>
+#include <mach/h3600_asic.h>
 #endif
 
 #include "generic.h"
@@ -681,7 +681,7 @@ static struct ipaq_model_ops h3800_model_ops __initdata = {
 
 #define MAX_ASIC_ISR_LOOPS    20
 
-/* The order of these is important - see #include <asm/arch/irqs.h> */
+/* The order of these is important - see #include <mach/irqs.h> */
 static u32 kpio_irq_mask[] = {
 	KPIO_KEY_ALL,
 	KPIO_SPI_INT,
@@ -834,7 +834,7 @@ static void __init h3800_init_irq(void)
 		set_irq_chip(irq, &h3800_gpio_irqchip);
 	}
 #endif
-	set_irq_type(IRQ_GPIO_H3800_ASIC, IRQT_RISING);
+	set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux);
 }
 
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 046b213efd5b..e7056c0b562c 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -22,7 +22,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 #include <asm/page.h>
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1100.h b/arch/arm/mach-sa1100/include/mach/SA-1100.h
new file mode 100644
index 000000000000..62aaf04a3906
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/SA-1100.h
@@ -0,0 +1,2072 @@
+/*
+ *	FILE    	SA-1100.h
+ *
+ *	Version 	1.2
+ *	Author  	Copyright (c) Marc A. Viredaz, 1998
+ *	        	DEC Western Research Laboratory, Palo Alto, CA
+ *	Date    	January 1998 (April 1997)
+ *	System  	StrongARM SA-1100
+ *	Language	C or ARM Assembly
+ *	Purpose 	Definition of constants related to the StrongARM
+ *	        	SA-1100 microprocessor (Advanced RISC Machine (ARM)
+ *	        	architecture version 4). This file is based on the
+ *	        	StrongARM SA-1100 data sheet version 2.2.
+ *
+ */
+
+
+/* Be sure that virtual mapping is defined right */
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not SA-1100.h
+#endif
+
+#include "bitfield.h"
+
+/*
+ * SA1100 CS line to physical address
+ */
+
+#define SA1100_CS0_PHYS	0x00000000
+#define SA1100_CS1_PHYS	0x08000000
+#define SA1100_CS2_PHYS	0x10000000
+#define SA1100_CS3_PHYS	0x18000000
+#define SA1100_CS4_PHYS	0x40000000
+#define SA1100_CS5_PHYS	0x48000000
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
+#define PCMCIASp	(4*PCMCIAPrtSp)	/* PCMCIA Space [byte]             */
+#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]         */
+#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
+#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]      */
+
+#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]           */
+#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]       */
+#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]    */
+
+#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]           */
+#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]       */
+#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]    */
+
+#define _PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
+                	(0x20000000 + (Nb)*PCMCIASp)
+#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]               */
+#define _PCMCIAAttr(Nb)	        	/* PCMCIA Attribute [0..1]         */ \
+                	(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
+#define _PCMCIAMem(Nb)	        	/* PCMCIA Memory [0..1]            */ \
+                	(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
+
+#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0                        */
+#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O                    */
+#define _PCMCIA0Attr	_PCMCIAAttr (0)	/* PCMCIA 0 Attribute              */
+#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory                 */
+
+#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1                        */
+#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O                    */
+#define _PCMCIA1Attr	_PCMCIAAttr (1)	/* PCMCIA 1 Attribute              */
+#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory                 */
+
+
+/*
+ * Universal Serial Bus (USB) Device Controller (UDC) control registers
+ *
+ * Registers
+ *    Ser0UDCCR 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Control Register (read/write).
+ *    Ser0UDCAR 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Address Register (read/write).
+ *    Ser0UDCOMP	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Output Maximum Packet size register
+ *              	(read/write).
+ *    Ser0UDCIMP	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Input Maximum Packet size register
+ *              	(read/write).
+ *    Ser0UDCCS0	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Control/Status register end-point 0
+ *              	(read/write).
+ *    Ser0UDCCS1	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Control/Status register end-point 1
+ *              	(output, read/write).
+ *    Ser0UDCCS2	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Control/Status register end-point 2
+ *              	(input, read/write).
+ *    Ser0UDCD0 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Data register end-point 0
+ *              	(read/write).
+ *    Ser0UDCWC 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Write Count register end-point 0
+ *              	(read).
+ *    Ser0UDCDR 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Data Register (read/write).
+ *    Ser0UDCSR 	Serial port 0 Universal Serial Bus (USB) Device
+ *              	Controller (UDC) Status Register (read/write).
+ */
+
+#define Ser0UDCCR	__REG(0x80000000)  /* Ser. port 0 UDC Control Reg. */
+#define Ser0UDCAR	__REG(0x80000004)  /* Ser. port 0 UDC Address Reg. */
+#define Ser0UDCOMP	__REG(0x80000008)  /* Ser. port 0 UDC Output Maximum Packet size reg. */
+#define Ser0UDCIMP	__REG(0x8000000C)  /* Ser. port 0 UDC Input Maximum Packet size reg. */
+#define Ser0UDCCS0	__REG(0x80000010)  /* Ser. port 0 UDC Control/Status reg. end-point 0 */
+#define Ser0UDCCS1	__REG(0x80000014)  /* Ser. port 0 UDC Control/Status reg. end-point 1 (output) */
+#define Ser0UDCCS2	__REG(0x80000018)  /* Ser. port 0 UDC Control/Status reg. end-point 2 (input) */
+#define Ser0UDCD0	__REG(0x8000001C)  /* Ser. port 0 UDC Data reg. end-point 0 */
+#define Ser0UDCWC	__REG(0x80000020)  /* Ser. port 0 UDC Write Count reg. end-point 0 */
+#define Ser0UDCDR	__REG(0x80000028)  /* Ser. port 0 UDC Data Reg. */
+#define Ser0UDCSR	__REG(0x80000030)  /* Ser. port 0 UDC Status Reg. */
+
+#define UDCCR_UDD	0x00000001	/* UDC Disable                     */
+#define UDCCR_UDA	0x00000002	/* UDC Active (read)               */
+#define UDCCR_RESIM	0x00000004	/* Resume Interrupt Mask, per errata */
+#define UDCCR_EIM	0x00000008	/* End-point 0 Interrupt Mask      */
+                	        	/* (disable)                       */
+#define UDCCR_RIM	0x00000010	/* Receive Interrupt Mask          */
+                	        	/* (disable)                       */
+#define UDCCR_TIM	0x00000020	/* Transmit Interrupt Mask         */
+                	        	/* (disable)                       */
+#define UDCCR_SRM	0x00000040	/* Suspend/Resume interrupt Mask   */
+                	        	/* (disable)                       */
+#define UDCCR_SUSIM	UDCCR_SRM	/* Per errata, SRM just masks suspend */
+#define UDCCR_REM	0x00000080	/* REset interrupt Mask (disable)  */
+
+#define UDCAR_ADD	Fld (7, 0)	/* function ADDress                */
+
+#define UDCOMP_OUTMAXP	Fld (8, 0)	/* OUTput MAXimum Packet size - 1  */
+                	        	/* [byte]                          */
+#define UDCOMP_OutMaxPkt(Size)  	/* Output Maximum Packet size      */ \
+                	        	/* [1..256 byte]                   */ \
+                	(((Size) - 1) << FShft (UDCOMP_OUTMAXP))
+
+#define UDCIMP_INMAXP	Fld (8, 0)	/* INput MAXimum Packet size - 1   */
+                	        	/* [byte]                          */
+#define UDCIMP_InMaxPkt(Size)   	/* Input Maximum Packet size       */ \
+                	        	/* [1..256 byte]                   */ \
+                	(((Size) - 1) << FShft (UDCIMP_INMAXP))
+
+#define UDCCS0_OPR	0x00000001	/* Output Packet Ready (read)      */
+#define UDCCS0_IPR	0x00000002	/* Input Packet Ready              */
+#define UDCCS0_SST	0x00000004	/* Sent STall                      */
+#define UDCCS0_FST	0x00000008	/* Force STall                     */
+#define UDCCS0_DE	0x00000010	/* Data End                        */
+#define UDCCS0_SE	0x00000020	/* Setup End (read)                */
+#define UDCCS0_SO	0x00000040	/* Serviced Output packet ready    */
+                	        	/* (write)                         */
+#define UDCCS0_SSE	0x00000080	/* Serviced Setup End (write)      */
+
+#define UDCCS1_RFS	0x00000001	/* Receive FIFO 12-bytes or more   */
+                	        	/* Service request (read)          */
+#define UDCCS1_RPC	0x00000002	/* Receive Packet Complete         */
+#define UDCCS1_RPE	0x00000004	/* Receive Packet Error (read)     */
+#define UDCCS1_SST	0x00000008	/* Sent STall                      */
+#define UDCCS1_FST	0x00000010	/* Force STall                     */
+#define UDCCS1_RNE	0x00000020	/* Receive FIFO Not Empty (read)   */
+
+#define UDCCS2_TFS	0x00000001	/* Transmit FIFO 8-bytes or less   */
+                	        	/* Service request (read)          */
+#define UDCCS2_TPC	0x00000002	/* Transmit Packet Complete        */
+#define UDCCS2_TPE	0x00000004	/* Transmit Packet Error (read)    */
+#define UDCCS2_TUR	0x00000008	/* Transmit FIFO Under-Run         */
+#define UDCCS2_SST	0x00000010	/* Sent STall                      */
+#define UDCCS2_FST	0x00000020	/* Force STall                     */
+
+#define UDCD0_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
+
+#define UDCWC_WC	Fld (4, 0)	/* Write Count                     */
+
+#define UDCDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
+
+#define UDCSR_EIR	0x00000001	/* End-point 0 Interrupt Request   */
+#define UDCSR_RIR	0x00000002	/* Receive Interrupt Request       */
+#define UDCSR_TIR	0x00000004	/* Transmit Interrupt Request      */
+#define UDCSR_SUSIR	0x00000008	/* SUSpend Interrupt Request       */
+#define UDCSR_RESIR	0x00000010	/* RESume Interrupt Request        */
+#define UDCSR_RSTIR	0x00000020	/* ReSeT Interrupt Request         */
+
+
+/*
+ * Universal Asynchronous Receiver/Transmitter (UART) control registers
+ *
+ * Registers
+ *    Ser1UTCR0 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 0
+ *              	(read/write).
+ *    Ser1UTCR1 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 1
+ *              	(read/write).
+ *    Ser1UTCR2 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 2
+ *              	(read/write).
+ *    Ser1UTCR3 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 3
+ *              	(read/write).
+ *    Ser1UTDR  	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Data Register
+ *              	(read/write).
+ *    Ser1UTSR0 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 0
+ *              	(read/write).
+ *    Ser1UTSR1 	Serial port 1 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 1 (read).
+ *
+ *    Ser2UTCR0 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 0
+ *              	(read/write).
+ *    Ser2UTCR1 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 1
+ *              	(read/write).
+ *    Ser2UTCR2 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 2
+ *              	(read/write).
+ *    Ser2UTCR3 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 3
+ *              	(read/write).
+ *    Ser2UTCR4 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 4
+ *              	(read/write).
+ *    Ser2UTDR  	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Data Register
+ *              	(read/write).
+ *    Ser2UTSR0 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 0
+ *              	(read/write).
+ *    Ser2UTSR1 	Serial port 2 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 1 (read).
+ *
+ *    Ser3UTCR0 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 0
+ *              	(read/write).
+ *    Ser3UTCR1 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 1
+ *              	(read/write).
+ *    Ser3UTCR2 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 2
+ *              	(read/write).
+ *    Ser3UTCR3 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Control Register 3
+ *              	(read/write).
+ *    Ser3UTDR  	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Data Register
+ *              	(read/write).
+ *    Ser3UTSR0 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 0
+ *              	(read/write).
+ *    Ser3UTSR1 	Serial port 3 Universal Asynchronous
+ *              	Receiver/Transmitter (UART) Status Register 1 (read).
+ *
+ * Clocks
+ *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
+ *              	or 3.5795 MHz).
+ *    fua, Tua  	Frequency, period of the UART communication.
+ */
+
+#define _UTCR0(Nb)	__REG(0x80010000 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 0 [1..3] */
+#define _UTCR1(Nb)	__REG(0x80010004 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 1 [1..3] */
+#define _UTCR2(Nb)	__REG(0x80010008 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 2 [1..3] */
+#define _UTCR3(Nb)	__REG(0x8001000C + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 3 [1..3] */
+#define _UTCR4(Nb)	__REG(0x80010010 + ((Nb) - 1)*0x00020000)  /* UART Control Reg. 4 [2] */
+#define _UTDR(Nb)	__REG(0x80010014 + ((Nb) - 1)*0x00020000)  /* UART Data Reg. [1..3] */
+#define _UTSR0(Nb)	__REG(0x8001001C + ((Nb) - 1)*0x00020000)  /* UART Status Reg. 0 [1..3] */
+#define _UTSR1(Nb)	__REG(0x80010020 + ((Nb) - 1)*0x00020000)  /* UART Status Reg. 1 [1..3] */
+
+#define Ser1UTCR0	_UTCR0 (1)	/* Ser. port 1 UART Control Reg. 0 */
+#define Ser1UTCR1	_UTCR1 (1)	/* Ser. port 1 UART Control Reg. 1 */
+#define Ser1UTCR2	_UTCR2 (1)	/* Ser. port 1 UART Control Reg. 2 */
+#define Ser1UTCR3	_UTCR3 (1)	/* Ser. port 1 UART Control Reg. 3 */
+#define Ser1UTDR	_UTDR (1)	/* Ser. port 1 UART Data Reg.      */
+#define Ser1UTSR0	_UTSR0 (1)	/* Ser. port 1 UART Status Reg. 0  */
+#define Ser1UTSR1	_UTSR1 (1)	/* Ser. port 1 UART Status Reg. 1  */
+
+#define Ser2UTCR0	_UTCR0 (2)	/* Ser. port 2 UART Control Reg. 0 */
+#define Ser2UTCR1	_UTCR1 (2)	/* Ser. port 2 UART Control Reg. 1 */
+#define Ser2UTCR2	_UTCR2 (2)	/* Ser. port 2 UART Control Reg. 2 */
+#define Ser2UTCR3	_UTCR3 (2)	/* Ser. port 2 UART Control Reg. 3 */
+#define Ser2UTCR4	_UTCR4 (2)	/* Ser. port 2 UART Control Reg. 4 */
+#define Ser2UTDR	_UTDR (2)	/* Ser. port 2 UART Data Reg.      */
+#define Ser2UTSR0	_UTSR0 (2)	/* Ser. port 2 UART Status Reg. 0  */
+#define Ser2UTSR1	_UTSR1 (2)	/* Ser. port 2 UART Status Reg. 1  */
+
+#define Ser3UTCR0	_UTCR0 (3)	/* Ser. port 3 UART Control Reg. 0 */
+#define Ser3UTCR1	_UTCR1 (3)	/* Ser. port 3 UART Control Reg. 1 */
+#define Ser3UTCR2	_UTCR2 (3)	/* Ser. port 3 UART Control Reg. 2 */
+#define Ser3UTCR3	_UTCR3 (3)	/* Ser. port 3 UART Control Reg. 3 */
+#define Ser3UTDR	_UTDR (3)	/* Ser. port 3 UART Data Reg.      */
+#define Ser3UTSR0	_UTSR0 (3)	/* Ser. port 3 UART Status Reg. 0  */
+#define Ser3UTSR1	_UTSR1 (3)	/* Ser. port 3 UART Status Reg. 1  */
+
+/* Those are still used in some places */
+#define _Ser1UTCR0	__PREG(Ser1UTCR0)
+#define _Ser2UTCR0	__PREG(Ser2UTCR0)
+#define _Ser3UTCR0	__PREG(Ser3UTCR0)
+
+/* Register offsets */
+#define UTCR0		0x00
+#define UTCR1		0x04
+#define UTCR2		0x08
+#define UTCR3		0x0c
+#define UTDR		0x14
+#define UTSR0		0x1c
+#define UTSR1		0x20
+
+#define UTCR0_PE	0x00000001	/* Parity Enable                   */
+#define UTCR0_OES	0x00000002	/* Odd/Even parity Select          */
+#define UTCR0_OddPar	(UTCR0_OES*0)	/*  Odd Parity                     */
+#define UTCR0_EvenPar	(UTCR0_OES*1)	/*  Even Parity                    */
+#define UTCR0_SBS	0x00000004	/* Stop Bit Select                 */
+#define UTCR0_1StpBit	(UTCR0_SBS*0)	/*  1 Stop Bit per frame           */
+#define UTCR0_2StpBit	(UTCR0_SBS*1)	/*  2 Stop Bits per frame          */
+#define UTCR0_DSS	0x00000008	/* Data Size Select                */
+#define UTCR0_7BitData	(UTCR0_DSS*0)	/*  7-Bit Data                     */
+#define UTCR0_8BitData	(UTCR0_DSS*1)	/*  8-Bit Data                     */
+#define UTCR0_SCE	0x00000010	/* Sample Clock Enable             */
+                	        	/* (ser. port 1: GPIO [18],        */
+                	        	/* ser. port 3: GPIO [20])         */
+#define UTCR0_RCE	0x00000020	/* Receive Clock Edge select       */
+#define UTCR0_RcRsEdg	(UTCR0_RCE*0)	/*  Receive clock Rising-Edge      */
+#define UTCR0_RcFlEdg	(UTCR0_RCE*1)	/*  Receive clock Falling-Edge     */
+#define UTCR0_TCE	0x00000040	/* Transmit Clock Edge select      */
+#define UTCR0_TrRsEdg	(UTCR0_TCE*0)	/*  Transmit clock Rising-Edge     */
+#define UTCR0_TrFlEdg	(UTCR0_TCE*1)	/*  Transmit clock Falling-Edge    */
+#define UTCR0_Ser2IrDA	        	/* Ser. port 2 IrDA settings       */ \
+                	(UTCR0_1StpBit + UTCR0_8BitData)
+
+#define UTCR1_BRD	Fld (4, 0)	/* Baud Rate Divisor/16 - 1 [11:8] */
+#define UTCR2_BRD	Fld (8, 0)	/* Baud Rate Divisor/16 - 1  [7:0] */
+                	        	/* fua = fxtl/(16*(BRD[11:0] + 1)) */
+                	        	/* Tua = 16*(BRD [11:0] + 1)*Txtl  */
+#define UTCR1_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
+                	(((Div) - 16)/16 >> FSize (UTCR2_BRD) << \
+                	 FShft (UTCR1_BRD))
+#define UTCR2_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
+                	(((Div) - 16)/16 & FAlnMsk (UTCR2_BRD) << \
+                	 FShft (UTCR2_BRD))
+                	        	/*  fua = fxtl/(16*Floor (Div/16)) */
+                	        	/*  Tua = 16*Floor (Div/16)*Txtl   */
+#define UTCR1_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
+                	(((Div) - 1)/16 >> FSize (UTCR2_BRD) << \
+                	 FShft (UTCR1_BRD))
+#define UTCR2_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
+                	(((Div) - 1)/16 & FAlnMsk (UTCR2_BRD) << \
+                	 FShft (UTCR2_BRD))
+                	        	/*  fua = fxtl/(16*Ceil (Div/16))  */
+                	        	/*  Tua = 16*Ceil (Div/16)*Txtl    */
+
+#define UTCR3_RXE	0x00000001	/* Receive Enable                  */
+#define UTCR3_TXE	0x00000002	/* Transmit Enable                 */
+#define UTCR3_BRK	0x00000004	/* BReaK mode                      */
+#define UTCR3_RIE	0x00000008	/* Receive FIFO 1/3-to-2/3-full or */
+                	        	/* more Interrupt Enable           */
+#define UTCR3_TIE	0x00000010	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Interrupt Enable                */
+#define UTCR3_LBM	0x00000020	/* Look-Back Mode                  */
+#define UTCR3_Ser2IrDA	        	/* Ser. port 2 IrDA settings (RIE, */ \
+                	        	/* TIE, LBM can be set or cleared) */ \
+                	(UTCR3_RXE + UTCR3_TXE)
+
+#define UTCR4_HSE	0x00000001	/* Hewlett-Packard Serial InfraRed */
+                	        	/* (HP-SIR) modulation Enable      */
+#define UTCR4_NRZ	(UTCR4_HSE*0)	/*  Non-Return to Zero modulation  */
+#define UTCR4_HPSIR	(UTCR4_HSE*1)	/*  HP-SIR modulation              */
+#define UTCR4_LPM	0x00000002	/* Low-Power Mode                  */
+#define UTCR4_Z3_16Bit	(UTCR4_LPM*0)	/*  Zero pulse = 3/16 Bit time     */
+#define UTCR4_Z1_6us	(UTCR4_LPM*1)	/*  Zero pulse = 1.6 us            */
+
+#define UTDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
+#if 0           	        	/* Hidden receive FIFO bits        */
+#define UTDR_PRE	0x00000100	/*  receive PaRity Error (read)    */
+#define UTDR_FRE	0x00000200	/*  receive FRaming Error (read)   */
+#define UTDR_ROR	0x00000400	/*  Receive FIFO Over-Run (read)   */
+#endif /* 0 */
+
+#define UTSR0_TFS	0x00000001	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Service request (read)          */
+#define UTSR0_RFS	0x00000002	/* Receive FIFO 1/3-to-2/3-full or */
+                	        	/* more Service request (read)     */
+#define UTSR0_RID	0x00000004	/* Receiver IDle                   */
+#define UTSR0_RBB	0x00000008	/* Receive Beginning of Break      */
+#define UTSR0_REB	0x00000010	/* Receive End of Break            */
+#define UTSR0_EIF	0x00000020	/* Error In FIFO (read)            */
+
+#define UTSR1_TBY	0x00000001	/* Transmitter BusY (read)         */
+#define UTSR1_RNE	0x00000002	/* Receive FIFO Not Empty (read)   */
+#define UTSR1_TNF	0x00000004	/* Transmit FIFO Not Full (read)   */
+#define UTSR1_PRE	0x00000008	/* receive PaRity Error (read)     */
+#define UTSR1_FRE	0x00000010	/* receive FRaming Error (read)    */
+#define UTSR1_ROR	0x00000020	/* Receive FIFO Over-Run (read)    */
+
+
+/*
+ * Synchronous Data Link Controller (SDLC) control registers
+ *
+ * Registers
+ *    Ser1SDCR0 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Control Register 0 (read/write).
+ *    Ser1SDCR1 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Control Register 1 (read/write).
+ *    Ser1SDCR2 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Control Register 2 (read/write).
+ *    Ser1SDCR3 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Control Register 3 (read/write).
+ *    Ser1SDCR4 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Control Register 4 (read/write).
+ *    Ser1SDDR  	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Data Register (read/write).
+ *    Ser1SDSR0 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Status Register 0 (read/write).
+ *    Ser1SDSR1 	Serial port 1 Synchronous Data Link Controller (SDLC)
+ *              	Status Register 1 (read/write).
+ *
+ * Clocks
+ *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
+ *              	or 3.5795 MHz).
+ *    fsd, Tsd  	Frequency, period of the SDLC communication.
+ */
+
+#define Ser1SDCR0	__REG(0x80020060)  /* Ser. port 1 SDLC Control Reg. 0 */
+#define Ser1SDCR1	__REG(0x80020064)  /* Ser. port 1 SDLC Control Reg. 1 */
+#define Ser1SDCR2	__REG(0x80020068)  /* Ser. port 1 SDLC Control Reg. 2 */
+#define Ser1SDCR3	__REG(0x8002006C)  /* Ser. port 1 SDLC Control Reg. 3 */
+#define Ser1SDCR4	__REG(0x80020070)  /* Ser. port 1 SDLC Control Reg. 4 */
+#define Ser1SDDR	__REG(0x80020078)  /* Ser. port 1 SDLC Data Reg.      */
+#define Ser1SDSR0	__REG(0x80020080)  /* Ser. port 1 SDLC Status Reg. 0  */
+#define Ser1SDSR1	__REG(0x80020084)  /* Ser. port 1 SDLC Status Reg. 1  */
+
+#define SDCR0_SUS	0x00000001	/* SDLC/UART Select                */
+#define SDCR0_SDLC	(SDCR0_SUS*0)	/*  SDLC mode (TXD1 & RXD1)        */
+#define SDCR0_UART	(SDCR0_SUS*1)	/*  UART mode (TXD1 & RXD1)        */
+#define SDCR0_SDF	0x00000002	/* Single/Double start Flag select */
+#define SDCR0_SglFlg	(SDCR0_SDF*0)	/*  Single start Flag              */
+#define SDCR0_DblFlg	(SDCR0_SDF*1)	/*  Double start Flag              */
+#define SDCR0_LBM	0x00000004	/* Look-Back Mode                  */
+#define SDCR0_BMS	0x00000008	/* Bit Modulation Select           */
+#define SDCR0_FM0	(SDCR0_BMS*0)	/*  Freq. Modulation zero (0)      */
+#define SDCR0_NRZ	(SDCR0_BMS*1)	/*  Non-Return to Zero modulation  */
+#define SDCR0_SCE	0x00000010	/* Sample Clock Enable (GPIO [16]) */
+#define SDCR0_SCD	0x00000020	/* Sample Clock Direction select   */
+                	        	/* (GPIO [16])                     */
+#define SDCR0_SClkIn	(SDCR0_SCD*0)	/*  Sample Clock Input             */
+#define SDCR0_SClkOut	(SDCR0_SCD*1)	/*  Sample Clock Output            */
+#define SDCR0_RCE	0x00000040	/* Receive Clock Edge select       */
+#define SDCR0_RcRsEdg	(SDCR0_RCE*0)	/*  Receive clock Rising-Edge      */
+#define SDCR0_RcFlEdg	(SDCR0_RCE*1)	/*  Receive clock Falling-Edge     */
+#define SDCR0_TCE	0x00000080	/* Transmit Clock Edge select      */
+#define SDCR0_TrRsEdg	(SDCR0_TCE*0)	/*  Transmit clock Rising-Edge     */
+#define SDCR0_TrFlEdg	(SDCR0_TCE*1)	/*  Transmit clock Falling-Edge    */
+
+#define SDCR1_AAF	0x00000001	/* Abort After Frame enable        */
+                	        	/* (GPIO [17])                     */
+#define SDCR1_TXE	0x00000002	/* Transmit Enable                 */
+#define SDCR1_RXE	0x00000004	/* Receive Enable                  */
+#define SDCR1_RIE	0x00000008	/* Receive FIFO 1/3-to-2/3-full or */
+                	        	/* more Interrupt Enable           */
+#define SDCR1_TIE	0x00000010	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Interrupt Enable                */
+#define SDCR1_AME	0x00000020	/* Address Match Enable            */
+#define SDCR1_TUS	0x00000040	/* Transmit FIFO Under-run Select  */
+#define SDCR1_EFrmURn	(SDCR1_TUS*0)	/*  End Frame on Under-Run         */
+#define SDCR1_AbortURn	(SDCR1_TUS*1)	/*  Abort on Under-Run             */
+#define SDCR1_RAE	0x00000080	/* Receive Abort interrupt Enable  */
+
+#define SDCR2_AMV	Fld (8, 0)	/* Address Match Value             */
+
+#define SDCR3_BRD	Fld (4, 0)	/* Baud Rate Divisor/16 - 1 [11:8] */
+#define SDCR4_BRD	Fld (8, 0)	/* Baud Rate Divisor/16 - 1  [7:0] */
+                	        	/* fsd = fxtl/(16*(BRD[11:0] + 1)) */
+                	        	/* Tsd = 16*(BRD[11:0] + 1)*Txtl   */
+#define SDCR3_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
+                	(((Div) - 16)/16 >> FSize (SDCR4_BRD) << \
+                	 FShft (SDCR3_BRD))
+#define SDCR4_BdRtDiv(Div)      	/*  Baud Rate Divisor [16..65536]  */ \
+                	(((Div) - 16)/16 & FAlnMsk (SDCR4_BRD) << \
+                	 FShft (SDCR4_BRD))
+                	        	/*  fsd = fxtl/(16*Floor (Div/16)) */
+                	        	/*  Tsd = 16*Floor (Div/16)*Txtl   */
+#define SDCR3_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
+                	(((Div) - 1)/16 >> FSize (SDCR4_BRD) << \
+                	 FShft (SDCR3_BRD))
+#define SDCR4_CeilBdRtDiv(Div)  	/*  Ceil. of BdRtDiv [16..65536]   */ \
+                	(((Div) - 1)/16 & FAlnMsk (SDCR4_BRD) << \
+                	 FShft (SDCR4_BRD))
+                	        	/*  fsd = fxtl/(16*Ceil (Div/16))  */
+                	        	/*  Tsd = 16*Ceil (Div/16)*Txtl    */
+
+#define SDDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
+#if 0           	        	/* Hidden receive FIFO bits        */
+#define SDDR_EOF	0x00000100	/*  receive End-Of-Frame (read)    */
+#define SDDR_CRE	0x00000200	/*  receive CRC Error (read)       */
+#define SDDR_ROR	0x00000400	/*  Receive FIFO Over-Run (read)   */
+#endif /* 0 */
+
+#define SDSR0_EIF	0x00000001	/* Error In FIFO (read)            */
+#define SDSR0_TUR	0x00000002	/* Transmit FIFO Under-Run         */
+#define SDSR0_RAB	0x00000004	/* Receive ABort                   */
+#define SDSR0_TFS	0x00000008	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Service request (read)          */
+#define SDSR0_RFS	0x00000010	/* Receive FIFO 1/3-to-2/3-full or */
+                	        	/* more Service request (read)     */
+
+#define SDSR1_RSY	0x00000001	/* Receiver SYnchronized (read)    */
+#define SDSR1_TBY	0x00000002	/* Transmitter BusY (read)         */
+#define SDSR1_RNE	0x00000004	/* Receive FIFO Not Empty (read)   */
+#define SDSR1_TNF	0x00000008	/* Transmit FIFO Not Full (read)   */
+#define SDSR1_RTD	0x00000010	/* Receive Transition Detected     */
+#define SDSR1_EOF	0x00000020	/* receive End-Of-Frame (read)     */
+#define SDSR1_CRE	0x00000040	/* receive CRC Error (read)        */
+#define SDSR1_ROR	0x00000080	/* Receive FIFO Over-Run (read)    */
+
+
+/*
+ * High-Speed Serial to Parallel controller (HSSP) control registers
+ *
+ * Registers
+ *    Ser2HSCR0 	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Control Register 0 (read/write).
+ *    Ser2HSCR1 	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Control Register 1 (read/write).
+ *    Ser2HSDR  	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Data Register (read/write).
+ *    Ser2HSSR0 	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Status Register 0 (read/write).
+ *    Ser2HSSR1 	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Status Register 1 (read).
+ *    Ser2HSCR2 	Serial port 2 High-Speed Serial to Parallel
+ *              	controller (HSSP) Control Register 2 (read/write).
+ *              	[The HSCR2 register is only implemented in
+ *              	versions 2.0 (rev. = 8) and higher of the StrongARM
+ *              	SA-1100.]
+ */
+
+#define Ser2HSCR0	__REG(0x80040060)  /* Ser. port 2 HSSP Control Reg. 0 */
+#define Ser2HSCR1	__REG(0x80040064)  /* Ser. port 2 HSSP Control Reg. 1 */
+#define Ser2HSDR	__REG(0x8004006C)  /* Ser. port 2 HSSP Data Reg.      */
+#define Ser2HSSR0	__REG(0x80040074)  /* Ser. port 2 HSSP Status Reg. 0  */
+#define Ser2HSSR1	__REG(0x80040078)  /* Ser. port 2 HSSP Status Reg. 1  */
+#define Ser2HSCR2	__REG(0x90060028)  /* Ser. port 2 HSSP Control Reg. 2 */
+
+#define HSCR0_ITR	0x00000001	/* IrDA Transmission Rate          */
+#define HSCR0_UART	(HSCR0_ITR*0)	/*  UART mode (115.2 kb/s if IrDA) */
+#define HSCR0_HSSP	(HSCR0_ITR*1)	/*  HSSP mode (4 Mb/s)             */
+#define HSCR0_LBM	0x00000002	/* Look-Back Mode                  */
+#define HSCR0_TUS	0x00000004	/* Transmit FIFO Under-run Select  */
+#define HSCR0_EFrmURn	(HSCR0_TUS*0)	/*  End Frame on Under-Run         */
+#define HSCR0_AbortURn	(HSCR0_TUS*1)	/*  Abort on Under-Run             */
+#define HSCR0_TXE	0x00000008	/* Transmit Enable                 */
+#define HSCR0_RXE	0x00000010	/* Receive Enable                  */
+#define HSCR0_RIE	0x00000020	/* Receive FIFO 2/5-to-3/5-full or */
+                	        	/* more Interrupt Enable           */
+#define HSCR0_TIE	0x00000040	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Interrupt Enable                */
+#define HSCR0_AME	0x00000080	/* Address Match Enable            */
+
+#define HSCR1_AMV	Fld (8, 0)	/* Address Match Value             */
+
+#define HSDR_DATA	Fld (8, 0)	/* receive/transmit DATA FIFOs     */
+#if 0           	        	/* Hidden receive FIFO bits        */
+#define HSDR_EOF	0x00000100	/*  receive End-Of-Frame (read)    */
+#define HSDR_CRE	0x00000200	/*  receive CRC Error (read)       */
+#define HSDR_ROR	0x00000400	/*  Receive FIFO Over-Run (read)   */
+#endif /* 0 */
+
+#define HSSR0_EIF	0x00000001	/* Error In FIFO (read)            */
+#define HSSR0_TUR	0x00000002	/* Transmit FIFO Under-Run         */
+#define HSSR0_RAB	0x00000004	/* Receive ABort                   */
+#define HSSR0_TFS	0x00000008	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Service request (read)          */
+#define HSSR0_RFS	0x00000010	/* Receive FIFO 2/5-to-3/5-full or */
+                	        	/* more Service request (read)     */
+#define HSSR0_FRE	0x00000020	/* receive FRaming Error           */
+
+#define HSSR1_RSY	0x00000001	/* Receiver SYnchronized (read)    */
+#define HSSR1_TBY	0x00000002	/* Transmitter BusY (read)         */
+#define HSSR1_RNE	0x00000004	/* Receive FIFO Not Empty (read)   */
+#define HSSR1_TNF	0x00000008	/* Transmit FIFO Not Full (read)   */
+#define HSSR1_EOF	0x00000010	/* receive End-Of-Frame (read)     */
+#define HSSR1_CRE	0x00000020	/* receive CRC Error (read)        */
+#define HSSR1_ROR	0x00000040	/* Receive FIFO Over-Run (read)    */
+
+#define HSCR2_TXP	0x00040000	/* Transmit data Polarity (TXD_2)  */
+#define HSCR2_TrDataL	(HSCR2_TXP*0)	/*  Transmit Data active Low       */
+                	        	/*  (inverted)                     */
+#define HSCR2_TrDataH	(HSCR2_TXP*1)	/*  Transmit Data active High      */
+                	        	/*  (non-inverted)                 */
+#define HSCR2_RXP	0x00080000	/* Receive data Polarity (RXD_2)   */
+#define HSCR2_RcDataL	(HSCR2_RXP*0)	/*  Receive Data active Low        */
+                	        	/*  (inverted)                     */
+#define HSCR2_RcDataH	(HSCR2_RXP*1)	/*  Receive Data active High       */
+                	        	/*  (non-inverted)                 */
+
+
+/*
+ * Multi-media Communications Port (MCP) control registers
+ *
+ * Registers
+ *    Ser4MCCR0 	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Control Register 0 (read/write).
+ *    Ser4MCDR0 	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Data Register 0 (audio, read/write).
+ *    Ser4MCDR1 	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Data Register 1 (telecom, read/write).
+ *    Ser4MCDR2 	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Data Register 2 (CODEC registers, read/write).
+ *    Ser4MCSR  	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Status Register (read/write).
+ *    Ser4MCCR1 	Serial port 4 Multi-media Communications Port (MCP)
+ *              	Control Register 1 (read/write).
+ *              	[The MCCR1 register is only implemented in
+ *              	versions 2.0 (rev. = 8) and higher of the StrongARM
+ *              	SA-1100.]
+ *
+ * Clocks
+ *    fmc, Tmc  	Frequency, period of the MCP communication (10 MHz,
+ *              	12 MHz, or GPIO [21]).
+ *    faud, Taud	Frequency, period of the audio sampling.
+ *    ftcm, Ttcm	Frequency, period of the telecom sampling.
+ */
+
+#define Ser4MCCR0	__REG(0x80060000)  /* Ser. port 4 MCP Control Reg. 0 */
+#define Ser4MCDR0	__REG(0x80060008)  /* Ser. port 4 MCP Data Reg. 0 (audio) */
+#define Ser4MCDR1	__REG(0x8006000C)  /* Ser. port 4 MCP Data Reg. 1 (telecom) */
+#define Ser4MCDR2	__REG(0x80060010)  /* Ser. port 4 MCP Data Reg. 2 (CODEC reg.) */
+#define Ser4MCSR	__REG(0x80060018)  /* Ser. port 4 MCP Status Reg. */
+#define Ser4MCCR1	__REG(0x90060030)  /* Ser. port 4 MCP Control Reg. 1 */
+
+#define MCCR0_ASD	Fld (7, 0)	/* Audio Sampling rate Divisor/32  */
+                	        	/* [6..127]                        */
+                	        	/* faud = fmc/(32*ASD)             */
+                	        	/* Taud = 32*ASD*Tmc               */
+#define MCCR0_AudSmpDiv(Div)    	/*  Audio Sampling rate Divisor    */ \
+                	        	/*  [192..4064]                    */ \
+                	((Div)/32 << FShft (MCCR0_ASD))
+                	        	/*  faud = fmc/(32*Floor (Div/32)) */
+                	        	/*  Taud = 32*Floor (Div/32)*Tmc   */
+#define MCCR0_CeilAudSmpDiv(Div)	/*  Ceil. of AudSmpDiv [192..4064] */ \
+                	(((Div) + 31)/32 << FShft (MCCR0_ASD))
+                	        	/*  faud = fmc/(32*Ceil (Div/32))  */
+                	        	/*  Taud = 32*Ceil (Div/32)*Tmc    */
+#define MCCR0_TSD	Fld (7, 8)	/* Telecom Sampling rate           */
+                	        	/* Divisor/32 [16..127]            */
+                	        	/* ftcm = fmc/(32*TSD)             */
+                	        	/* Ttcm = 32*TSD*Tmc               */
+#define MCCR0_TcmSmpDiv(Div)    	/*  Telecom Sampling rate Divisor  */ \
+                	        	/*  [512..4064]                    */ \
+                	((Div)/32 << FShft (MCCR0_TSD))
+                	        	/*  ftcm = fmc/(32*Floor (Div/32)) */
+                	        	/*  Ttcm = 32*Floor (Div/32)*Tmc   */
+#define MCCR0_CeilTcmSmpDiv(Div)	/*  Ceil. of TcmSmpDiv [512..4064] */ \
+                	(((Div) + 31)/32 << FShft (MCCR0_TSD))
+                	        	/*  ftcm = fmc/(32*Ceil (Div/32))  */
+                	        	/*  Ttcm = 32*Ceil (Div/32)*Tmc    */
+#define MCCR0_MCE	0x00010000	/* MCP Enable                      */
+#define MCCR0_ECS	0x00020000	/* External Clock Select           */
+#define MCCR0_IntClk	(MCCR0_ECS*0)	/*  Internal Clock (10 or 12 MHz)  */
+#define MCCR0_ExtClk	(MCCR0_ECS*1)	/*  External Clock (GPIO [21])     */
+#define MCCR0_ADM	0x00040000	/* A/D (audio/telecom) data        */
+                	        	/* sampling/storing Mode           */
+#define MCCR0_VldBit	(MCCR0_ADM*0)	/*  Valid Bit storing mode         */
+#define MCCR0_SmpCnt	(MCCR0_ADM*1)	/*  Sampling Counter storing mode  */
+#define MCCR0_TTE	0x00080000	/* Telecom Transmit FIFO 1/2-full  */
+                	        	/* or less interrupt Enable        */
+#define MCCR0_TRE	0x00100000	/* Telecom Receive FIFO 1/2-full   */
+                	        	/* or more interrupt Enable        */
+#define MCCR0_ATE	0x00200000	/* Audio Transmit FIFO 1/2-full    */
+                	        	/* or less interrupt Enable        */
+#define MCCR0_ARE	0x00400000	/* Audio Receive FIFO 1/2-full or  */
+                	        	/* more interrupt Enable           */
+#define MCCR0_LBM	0x00800000	/* Look-Back Mode                  */
+#define MCCR0_ECP	Fld (2, 24)	/* External Clock Prescaler - 1    */
+#define MCCR0_ExtClkDiv(Div)    	/*  External Clock Divisor [1..4]  */ \
+                	(((Div) - 1) << FShft (MCCR0_ECP))
+
+#define MCDR0_DATA	Fld (12, 4)	/* receive/transmit audio DATA     */
+                	        	/* FIFOs                           */
+
+#define MCDR1_DATA	Fld (14, 2)	/* receive/transmit telecom DATA   */
+                	        	/* FIFOs                           */
+
+                	        	/* receive/transmit CODEC reg.     */
+                	        	/* FIFOs:                          */
+#define MCDR2_DATA	Fld (16, 0)	/*  reg. DATA                      */
+#define MCDR2_RW	0x00010000	/*  reg. Read/Write (transmit)     */
+#define MCDR2_Rd	(MCDR2_RW*0)	/*   reg. Read                     */
+#define MCDR2_Wr	(MCDR2_RW*1)	/*   reg. Write                    */
+#define MCDR2_ADD	Fld (4, 17)	/*  reg. ADDress                   */
+
+#define MCSR_ATS	0x00000001	/* Audio Transmit FIFO 1/2-full    */
+                	        	/* or less Service request (read)  */
+#define MCSR_ARS	0x00000002	/* Audio Receive FIFO 1/2-full or  */
+                	        	/* more Service request (read)     */
+#define MCSR_TTS	0x00000004	/* Telecom Transmit FIFO 1/2-full  */
+                	        	/* or less Service request (read)  */
+#define MCSR_TRS	0x00000008	/* Telecom Receive FIFO 1/2-full   */
+                	        	/* or more Service request (read)  */
+#define MCSR_ATU	0x00000010	/* Audio Transmit FIFO Under-run   */
+#define MCSR_ARO	0x00000020	/* Audio Receive FIFO Over-run     */
+#define MCSR_TTU	0x00000040	/* Telecom Transmit FIFO Under-run */
+#define MCSR_TRO	0x00000080	/* Telecom Receive FIFO Over-run   */
+#define MCSR_ANF	0x00000100	/* Audio transmit FIFO Not Full    */
+                	        	/* (read)                          */
+#define MCSR_ANE	0x00000200	/* Audio receive FIFO Not Empty    */
+                	        	/* (read)                          */
+#define MCSR_TNF	0x00000400	/* Telecom transmit FIFO Not Full  */
+                	        	/* (read)                          */
+#define MCSR_TNE	0x00000800	/* Telecom receive FIFO Not Empty  */
+                	        	/* (read)                          */
+#define MCSR_CWC	0x00001000	/* CODEC register Write Completed  */
+                	        	/* (read)                          */
+#define MCSR_CRC	0x00002000	/* CODEC register Read Completed   */
+                	        	/* (read)                          */
+#define MCSR_ACE	0x00004000	/* Audio CODEC Enabled (read)      */
+#define MCSR_TCE	0x00008000	/* Telecom CODEC Enabled (read)    */
+
+#define MCCR1_CFS	0x00100000	/* Clock Freq. Select              */
+#define MCCR1_F12MHz	(MCCR1_CFS*0)	/*  Freq. (fmc) = ~ 12 MHz         */
+                	        	/*  (11.981 MHz)                   */
+#define MCCR1_F10MHz	(MCCR1_CFS*1)	/*  Freq. (fmc) = ~ 10 MHz         */
+                	        	/*  (9.585 MHz)                    */
+
+
+/*
+ * Synchronous Serial Port (SSP) control registers
+ *
+ * Registers
+ *    Ser4SSCR0 	Serial port 4 Synchronous Serial Port (SSP) Control
+ *              	Register 0 (read/write).
+ *    Ser4SSCR1 	Serial port 4 Synchronous Serial Port (SSP) Control
+ *              	Register 1 (read/write).
+ *              	[Bits SPO and SP are only implemented in versions 2.0
+ *              	(rev. = 8) and higher of the StrongARM SA-1100.]
+ *    Ser4SSDR  	Serial port 4 Synchronous Serial Port (SSP) Data
+ *              	Register (read/write).
+ *    Ser4SSSR  	Serial port 4 Synchronous Serial Port (SSP) Status
+ *              	Register (read/write).
+ *
+ * Clocks
+ *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
+ *              	or 3.5795 MHz).
+ *    fss, Tss  	Frequency, period of the SSP communication.
+ */
+
+#define Ser4SSCR0	__REG(0x80070060)  /* Ser. port 4 SSP Control Reg. 0 */
+#define Ser4SSCR1	__REG(0x80070064)  /* Ser. port 4 SSP Control Reg. 1 */
+#define Ser4SSDR	__REG(0x8007006C)  /* Ser. port 4 SSP Data Reg. */
+#define Ser4SSSR	__REG(0x80070074)  /* Ser. port 4 SSP Status Reg. */
+
+#define SSCR0_DSS	Fld (4, 0)	/* Data Size - 1 Select [3..15]    */
+#define SSCR0_DataSize(Size)    	/*  Data Size Select [4..16]       */ \
+                	(((Size) - 1) << FShft (SSCR0_DSS))
+#define SSCR0_FRF	Fld (2, 4)	/* FRame Format                    */
+#define SSCR0_Motorola	        	/*  Motorola Serial Peripheral     */ \
+                	        	/*  Interface (SPI) format         */ \
+                	(0 << FShft (SSCR0_FRF))
+#define SSCR0_TI	        	/*  Texas Instruments Synchronous  */ \
+                	        	/*  Serial format                  */ \
+                	(1 << FShft (SSCR0_FRF))
+#define SSCR0_National	        	/*  National Microwire format      */ \
+                	(2 << FShft (SSCR0_FRF))
+#define SSCR0_SSE	0x00000080	/* SSP Enable                      */
+#define SSCR0_SCR	Fld (8, 8)	/* Serial Clock Rate divisor/2 - 1 */
+                	        	/* fss = fxtl/(2*(SCR + 1))        */
+                	        	/* Tss = 2*(SCR + 1)*Txtl          */
+#define SSCR0_SerClkDiv(Div)    	/*  Serial Clock Divisor [2..512]  */ \
+                	(((Div) - 2)/2 << FShft (SSCR0_SCR))
+                	        	/*  fss = fxtl/(2*Floor (Div/2))   */
+                	        	/*  Tss = 2*Floor (Div/2)*Txtl     */
+#define SSCR0_CeilSerClkDiv(Div)	/*  Ceil. of SerClkDiv [2..512]    */ \
+                	(((Div) - 1)/2 << FShft (SSCR0_SCR))
+                	        	/*  fss = fxtl/(2*Ceil (Div/2))    */
+                	        	/*  Tss = 2*Ceil (Div/2)*Txtl      */
+
+#define SSCR1_RIE	0x00000001	/* Receive FIFO 1/2-full or more   */
+                	        	/* Interrupt Enable                */
+#define SSCR1_TIE	0x00000002	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Interrupt Enable                */
+#define SSCR1_LBM	0x00000004	/* Look-Back Mode                  */
+#define SSCR1_SPO	0x00000008	/* Sample clock (SCLK) POlarity    */
+#define SSCR1_SClkIactL	(SSCR1_SPO*0)	/*  Sample Clock Inactive Low      */
+#define SSCR1_SClkIactH	(SSCR1_SPO*1)	/*  Sample Clock Inactive High     */
+#define SSCR1_SP	0x00000010	/* Sample clock (SCLK) Phase       */
+#define SSCR1_SClk1P	(SSCR1_SP*0)	/*  Sample Clock active 1 Period   */
+                	        	/*  after frame (SFRM, 1st edge)   */
+#define SSCR1_SClk1_2P	(SSCR1_SP*1)	/*  Sample Clock active 1/2 Period */
+                	        	/*  after frame (SFRM, 1st edge)   */
+#define SSCR1_ECS	0x00000020	/* External Clock Select           */
+#define SSCR1_IntClk	(SSCR1_ECS*0)	/*  Internal Clock                 */
+#define SSCR1_ExtClk	(SSCR1_ECS*1)	/*  External Clock (GPIO [19])     */
+
+#define SSDR_DATA	Fld (16, 0)	/* receive/transmit DATA FIFOs     */
+
+#define SSSR_TNF	0x00000002	/* Transmit FIFO Not Full (read)   */
+#define SSSR_RNE	0x00000004	/* Receive FIFO Not Empty (read)   */
+#define SSSR_BSY	0x00000008	/* SSP BuSY (read)                 */
+#define SSSR_TFS	0x00000010	/* Transmit FIFO 1/2-full or less  */
+                	        	/* Service request (read)          */
+#define SSSR_RFS	0x00000020	/* Receive FIFO 1/2-full or more   */
+                	        	/* Service request (read)          */
+#define SSSR_ROR	0x00000040	/* Receive FIFO Over-Run           */
+
+
+/*
+ * Operating System (OS) timer control registers
+ *
+ * Registers
+ *    OSMR0     	Operating System (OS) timer Match Register 0
+ *              	(read/write).
+ *    OSMR1     	Operating System (OS) timer Match Register 1
+ *              	(read/write).
+ *    OSMR2     	Operating System (OS) timer Match Register 2
+ *              	(read/write).
+ *    OSMR3     	Operating System (OS) timer Match Register 3
+ *              	(read/write).
+ *    OSCR      	Operating System (OS) timer Counter Register
+ *              	(read/write).
+ *    OSSR      	Operating System (OS) timer Status Register
+ *              	(read/write).
+ *    OWER      	Operating System (OS) timer Watch-dog Enable Register
+ *              	(read/write).
+ *    OIER      	Operating System (OS) timer Interrupt Enable Register
+ *              	(read/write).
+ */
+
+#define OSMR0  		__REG(0x90000000)  /* OS timer Match Reg. 0 */
+#define OSMR1  		__REG(0x90000004)  /* OS timer Match Reg. 1 */
+#define OSMR2  		__REG(0x90000008)  /* OS timer Match Reg. 2 */
+#define OSMR3  		__REG(0x9000000c)  /* OS timer Match Reg. 3 */
+#define OSCR   	__REG(0x90000010)  /* OS timer Counter Reg. */
+#define OSSR   	__REG(0x90000014	)  /* OS timer Status Reg. */
+#define OWER   	__REG(0x90000018	)  /* OS timer Watch-dog Enable Reg. */
+#define OIER   	__REG(0x9000001C	)  /* OS timer Interrupt Enable Reg. */
+
+#define OSSR_M(Nb)	        	/* Match detected [0..3]           */ \
+                	(0x00000001 << (Nb))
+#define OSSR_M0 	OSSR_M (0)	/* Match detected 0                */
+#define OSSR_M1 	OSSR_M (1)	/* Match detected 1                */
+#define OSSR_M2 	OSSR_M (2)	/* Match detected 2                */
+#define OSSR_M3 	OSSR_M (3)	/* Match detected 3                */
+
+#define OWER_WME	0x00000001	/* Watch-dog Match Enable          */
+                	        	/* (set only)                      */
+
+#define OIER_E(Nb)	        	/* match interrupt Enable [0..3]   */ \
+                	(0x00000001 << (Nb))
+#define OIER_E0 	OIER_E (0)	/* match interrupt Enable 0        */
+#define OIER_E1 	OIER_E (1)	/* match interrupt Enable 1        */
+#define OIER_E2 	OIER_E (2)	/* match interrupt Enable 2        */
+#define OIER_E3 	OIER_E (3)	/* match interrupt Enable 3        */
+
+
+/*
+ * Real-Time Clock (RTC) control registers
+ *
+ * Registers
+ *    RTAR      	Real-Time Clock (RTC) Alarm Register (read/write).
+ *    RCNR      	Real-Time Clock (RTC) CouNt Register (read/write).
+ *    RTTR      	Real-Time Clock (RTC) Trim Register (read/write).
+ *    RTSR      	Real-Time Clock (RTC) Status Register (read/write).
+ *
+ * Clocks
+ *    frtx, Trtx	Frequency, period of the real-time clock crystal
+ *              	(32.768 kHz nominal).
+ *    frtc, Trtc	Frequency, period of the real-time clock counter
+ *              	(1 Hz nominal).
+ */
+
+#define RTAR		__REG(0x90010000)  /* RTC Alarm Reg. */
+#define RCNR		__REG(0x90010004)  /* RTC CouNt Reg. */
+#define RTTR		__REG(0x90010008)  /* RTC Trim Reg. */
+#define RTSR		__REG(0x90010010)  /* RTC Status Reg. */
+
+#define RTTR_C  	Fld (16, 0)	/* clock divider Count - 1         */
+#define RTTR_D  	Fld (10, 16)	/* trim Delete count               */
+                	        	/* frtc = (1023*(C + 1) - D)*frtx/ */
+                	        	/*        (1023*(C + 1)^2)         */
+                	        	/* Trtc = (1023*(C + 1)^2)*Trtx/   */
+                	        	/*        (1023*(C + 1) - D)       */
+
+#define RTSR_AL 	0x00000001	/* ALarm detected                  */
+#define RTSR_HZ 	0x00000002	/* 1 Hz clock detected             */
+#define RTSR_ALE	0x00000004	/* ALarm interrupt Enable          */
+#define RTSR_HZE	0x00000008	/* 1 Hz clock interrupt Enable     */
+
+
+/*
+ * Power Manager (PM) control registers
+ *
+ * Registers
+ *    PMCR      	Power Manager (PM) Control Register (read/write).
+ *    PSSR      	Power Manager (PM) Sleep Status Register (read/write).
+ *    PSPR      	Power Manager (PM) Scratch-Pad Register (read/write).
+ *    PWER      	Power Manager (PM) Wake-up Enable Register
+ *              	(read/write).
+ *    PCFR      	Power Manager (PM) general ConFiguration Register
+ *              	(read/write).
+ *    PPCR      	Power Manager (PM) Phase-Locked Loop (PLL)
+ *              	Configuration Register (read/write).
+ *    PGSR      	Power Manager (PM) General-Purpose Input/Output (GPIO)
+ *              	Sleep state Register (read/write, see GPIO pins).
+ *    POSR      	Power Manager (PM) Oscillator Status Register (read).
+ *
+ * Clocks
+ *    fxtl, Txtl	Frequency, period of the system crystal (3.6864 MHz
+ *              	or 3.5795 MHz).
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ */
+
+#define PMCR		__REG(0x90020000)  /* PM Control Reg. */
+#define PSSR		__REG(0x90020004)  /* PM Sleep Status Reg. */
+#define PSPR		__REG(0x90020008)  /* PM Scratch-Pad Reg. */
+#define PWER		__REG(0x9002000C)  /* PM Wake-up Enable Reg. */
+#define PCFR		__REG(0x90020010)  /* PM general ConFiguration Reg. */
+#define PPCR		__REG(0x90020014)  /* PM PLL Configuration Reg. */
+#define PGSR		__REG(0x90020018)  /* PM GPIO Sleep state Reg. */
+#define POSR		__REG(0x9002001C)  /* PM Oscillator Status Reg. */
+
+#define PMCR_SF 	0x00000001	/* Sleep Force (set only)          */
+
+#define PSSR_SS 	0x00000001	/* Software Sleep                  */
+#define PSSR_BFS	0x00000002	/* Battery Fault Status            */
+                	        	/* (BATT_FAULT)                    */
+#define PSSR_VFS	0x00000004	/* Vdd Fault Status (VDD_FAULT)    */
+#define PSSR_DH 	0x00000008	/* DRAM control Hold               */
+#define PSSR_PH 	0x00000010	/* Peripheral control Hold         */
+
+#define PWER_GPIO(Nb)	GPIO_GPIO (Nb)	/* GPIO [0..27] wake-up enable     */
+#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
+#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
+#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
+#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
+#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
+#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
+#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
+#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
+#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
+#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
+#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
+#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
+#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
+#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
+#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
+#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
+#define PWER_GPIO16	PWER_GPIO (16)	/* GPIO [16] wake-up enable        */
+#define PWER_GPIO17	PWER_GPIO (17)	/* GPIO [17] wake-up enable        */
+#define PWER_GPIO18	PWER_GPIO (18)	/* GPIO [18] wake-up enable        */
+#define PWER_GPIO19	PWER_GPIO (19)	/* GPIO [19] wake-up enable        */
+#define PWER_GPIO20	PWER_GPIO (20)	/* GPIO [20] wake-up enable        */
+#define PWER_GPIO21	PWER_GPIO (21)	/* GPIO [21] wake-up enable        */
+#define PWER_GPIO22	PWER_GPIO (22)	/* GPIO [22] wake-up enable        */
+#define PWER_GPIO23	PWER_GPIO (23)	/* GPIO [23] wake-up enable        */
+#define PWER_GPIO24	PWER_GPIO (24)	/* GPIO [24] wake-up enable        */
+#define PWER_GPIO25	PWER_GPIO (25)	/* GPIO [25] wake-up enable        */
+#define PWER_GPIO26	PWER_GPIO (26)	/* GPIO [26] wake-up enable        */
+#define PWER_GPIO27	PWER_GPIO (27)	/* GPIO [27] wake-up enable        */
+#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
+
+#define PCFR_OPDE	0x00000001	/* Oscillator Power-Down Enable    */
+#define PCFR_ClkRun	(PCFR_OPDE*0)	/*  Clock Running in sleep mode    */
+#define PCFR_ClkStp	(PCFR_OPDE*1)	/*  Clock Stopped in sleep mode    */
+#define PCFR_FP 	0x00000002	/* Float PCMCIA pins               */
+#define PCFR_PCMCIANeg	(PCFR_FP*0)	/*  PCMCIA pins Negated (1)        */
+#define PCFR_PCMCIAFlt	(PCFR_FP*1)	/*  PCMCIA pins Floating           */
+#define PCFR_FS 	0x00000004	/* Float Static memory pins        */
+#define PCFR_StMemNeg	(PCFR_FS*0)	/*  Static Memory pins Negated (1) */
+#define PCFR_StMemFlt	(PCFR_FS*1)	/*  Static Memory pins Floating    */
+#define PCFR_FO 	0x00000008	/* Force RTC oscillator            */
+                	        	/* (32.768 kHz) enable On          */
+
+#define PPCR_CCF	Fld (5, 0)	/* CPU core Clock (CCLK) Freq.     */
+#define PPCR_Fx16	        	/*  Freq. x 16 (fcpu = 16*fxtl)    */ \
+                	(0x00 << FShft (PPCR_CCF))
+#define PPCR_Fx20	        	/*  Freq. x 20 (fcpu = 20*fxtl)    */ \
+                	(0x01 << FShft (PPCR_CCF))
+#define PPCR_Fx24	        	/*  Freq. x 24 (fcpu = 24*fxtl)    */ \
+                	(0x02 << FShft (PPCR_CCF))
+#define PPCR_Fx28	        	/*  Freq. x 28 (fcpu = 28*fxtl)    */ \
+                	(0x03 << FShft (PPCR_CCF))
+#define PPCR_Fx32	        	/*  Freq. x 32 (fcpu = 32*fxtl)    */ \
+                	(0x04 << FShft (PPCR_CCF))
+#define PPCR_Fx36	        	/*  Freq. x 36 (fcpu = 36*fxtl)    */ \
+                	(0x05 << FShft (PPCR_CCF))
+#define PPCR_Fx40	        	/*  Freq. x 40 (fcpu = 40*fxtl)    */ \
+                	(0x06 << FShft (PPCR_CCF))
+#define PPCR_Fx44	        	/*  Freq. x 44 (fcpu = 44*fxtl)    */ \
+                	(0x07 << FShft (PPCR_CCF))
+#define PPCR_Fx48	        	/*  Freq. x 48 (fcpu = 48*fxtl)    */ \
+                	(0x08 << FShft (PPCR_CCF))
+#define PPCR_Fx52	        	/*  Freq. x 52 (fcpu = 52*fxtl)    */ \
+                	(0x09 << FShft (PPCR_CCF))
+#define PPCR_Fx56	        	/*  Freq. x 56 (fcpu = 56*fxtl)    */ \
+                	(0x0A << FShft (PPCR_CCF))
+#define PPCR_Fx60	        	/*  Freq. x 60 (fcpu = 60*fxtl)    */ \
+                	(0x0B << FShft (PPCR_CCF))
+#define PPCR_Fx64	        	/*  Freq. x 64 (fcpu = 64*fxtl)    */ \
+                	(0x0C << FShft (PPCR_CCF))
+#define PPCR_Fx68	        	/*  Freq. x 68 (fcpu = 68*fxtl)    */ \
+                	(0x0D << FShft (PPCR_CCF))
+#define PPCR_Fx72	        	/*  Freq. x 72 (fcpu = 72*fxtl)    */ \
+                	(0x0E << FShft (PPCR_CCF))
+#define PPCR_Fx76	        	/*  Freq. x 76 (fcpu = 76*fxtl)    */ \
+                	(0x0F << FShft (PPCR_CCF))
+                	        	/*  3.6864 MHz crystal (fxtl):     */
+#define PPCR_F59_0MHz	PPCR_Fx16	/*   Freq. (fcpu) =  59.0 MHz      */
+#define PPCR_F73_7MHz	PPCR_Fx20	/*   Freq. (fcpu) =  73.7 MHz      */
+#define PPCR_F88_5MHz	PPCR_Fx24	/*   Freq. (fcpu) =  88.5 MHz      */
+#define PPCR_F103_2MHz	PPCR_Fx28	/*   Freq. (fcpu) = 103.2 MHz      */
+#define PPCR_F118_0MHz	PPCR_Fx32	/*   Freq. (fcpu) = 118.0 MHz      */
+#define PPCR_F132_7MHz	PPCR_Fx36	/*   Freq. (fcpu) = 132.7 MHz      */
+#define PPCR_F147_5MHz	PPCR_Fx40	/*   Freq. (fcpu) = 147.5 MHz      */
+#define PPCR_F162_2MHz	PPCR_Fx44	/*   Freq. (fcpu) = 162.2 MHz      */
+#define PPCR_F176_9MHz	PPCR_Fx48	/*   Freq. (fcpu) = 176.9 MHz      */
+#define PPCR_F191_7MHz	PPCR_Fx52	/*   Freq. (fcpu) = 191.7 MHz      */
+#define PPCR_F206_4MHz	PPCR_Fx56	/*   Freq. (fcpu) = 206.4 MHz      */
+#define PPCR_F221_2MHz	PPCR_Fx60	/*   Freq. (fcpu) = 221.2 MHz      */
+#define PPCR_F239_6MHz	PPCR_Fx64	/*   Freq. (fcpu) = 239.6 MHz      */
+#define PPCR_F250_7MHz	PPCR_Fx68	/*   Freq. (fcpu) = 250.7 MHz      */
+#define PPCR_F265_4MHz	PPCR_Fx72	/*   Freq. (fcpu) = 265.4 MHz      */
+#define PPCR_F280_2MHz	PPCR_Fx76	/*   Freq. (fcpu) = 280.2 MHz      */
+                	        	/*  3.5795 MHz crystal (fxtl):     */
+#define PPCR_F57_3MHz	PPCR_Fx16	/*   Freq. (fcpu) =  57.3 MHz      */
+#define PPCR_F71_6MHz	PPCR_Fx20	/*   Freq. (fcpu) =  71.6 MHz      */
+#define PPCR_F85_9MHz	PPCR_Fx24	/*   Freq. (fcpu) =  85.9 MHz      */
+#define PPCR_F100_2MHz	PPCR_Fx28	/*   Freq. (fcpu) = 100.2 MHz      */
+#define PPCR_F114_5MHz	PPCR_Fx32	/*   Freq. (fcpu) = 114.5 MHz      */
+#define PPCR_F128_9MHz	PPCR_Fx36	/*   Freq. (fcpu) = 128.9 MHz      */
+#define PPCR_F143_2MHz	PPCR_Fx40	/*   Freq. (fcpu) = 143.2 MHz      */
+#define PPCR_F157_5MHz	PPCR_Fx44	/*   Freq. (fcpu) = 157.5 MHz      */
+#define PPCR_F171_8MHz	PPCR_Fx48	/*   Freq. (fcpu) = 171.8 MHz      */
+#define PPCR_F186_1MHz	PPCR_Fx52	/*   Freq. (fcpu) = 186.1 MHz      */
+#define PPCR_F200_5MHz	PPCR_Fx56	/*   Freq. (fcpu) = 200.5 MHz      */
+#define PPCR_F214_8MHz	PPCR_Fx60	/*   Freq. (fcpu) = 214.8 MHz      */
+#define PPCR_F229_1MHz	PPCR_Fx64	/*   Freq. (fcpu) = 229.1 MHz      */
+#define PPCR_F243_4MHz	PPCR_Fx68	/*   Freq. (fcpu) = 243.4 MHz      */
+#define PPCR_F257_7MHz	PPCR_Fx72	/*   Freq. (fcpu) = 257.7 MHz      */
+#define PPCR_F272_0MHz	PPCR_Fx76	/*   Freq. (fcpu) = 272.0 MHz      */
+
+#define POSR_OOK	0x00000001	/* RTC Oscillator (32.768 kHz) OK  */
+
+
+/*
+ * Reset Controller (RC) control registers
+ *
+ * Registers
+ *    RSRR      	Reset Controller (RC) Software Reset Register
+ *              	(read/write).
+ *    RCSR      	Reset Controller (RC) Status Register (read/write).
+ */
+
+#define RSRR		__REG(0x90030000)  /* RC Software Reset Reg. */
+#define RCSR		__REG(0x90030004)  /* RC Status Reg. */
+
+#define RSRR_SWR	0x00000001	/* SoftWare Reset (set only)       */
+
+#define RCSR_HWR	0x00000001	/* HardWare Reset                  */
+#define RCSR_SWR	0x00000002	/* SoftWare Reset                  */
+#define RCSR_WDR	0x00000004	/* Watch-Dog Reset                 */
+#define RCSR_SMR	0x00000008	/* Sleep-Mode Reset                */
+
+
+/*
+ * Test unit control registers
+ *
+ * Registers
+ *    TUCR      	Test Unit Control Register (read/write).
+ */
+
+#define TUCR		__REG(0x90030008)  /* Test Unit Control Reg. */
+
+#define TUCR_TIC	0x00000040	/* TIC mode                        */
+#define TUCR_TTST	0x00000080	/* Trim TeST mode                  */
+#define TUCR_RCRC	0x00000100	/* Richard's Cyclic Redundancy     */
+                	        	/* Check                           */
+#define TUCR_PMD	0x00000200	/* Power Management Disable        */
+#define TUCR_MR 	0x00000400	/* Memory Request mode             */
+#define TUCR_NoMB	(TUCR_MR*0)	/*  No Memory Bus request & grant  */
+#define TUCR_MBGPIO	(TUCR_MR*1)	/*  Memory Bus request (MBREQ) &   */
+                	        	/*  grant (MBGNT) on GPIO [22:21]  */
+#define TUCR_CTB	Fld (3, 20)	/* Clock Test Bits                 */
+#define TUCR_FDC	0x00800000	/* RTC Force Delete Count          */
+#define TUCR_FMC	0x01000000	/* Force Michelle's Control mode   */
+#define TUCR_TMC	0x02000000	/* RTC Trimmer Multiplexer Control */
+#define TUCR_DPS	0x04000000	/* Disallow Pad Sleep              */
+#define TUCR_TSEL	Fld (3, 29)	/* clock Test SELect on GPIO [27]  */
+#define TUCR_32_768kHz	        	/*  32.768 kHz osc. on GPIO [27]   */ \
+                	(0 << FShft (TUCR_TSEL))
+#define TUCR_3_6864MHz	        	/*  3.6864 MHz osc. on GPIO [27]   */ \
+                	(1 << FShft (TUCR_TSEL))
+#define TUCR_VDD	        	/*  VDD ring osc./16 on GPIO [27]  */ \
+                	(2 << FShft (TUCR_TSEL))
+#define TUCR_96MHzPLL	        	/*  96 MHz PLL/4 on GPIO [27]      */ \
+                	(3 << FShft (TUCR_TSEL))
+#define TUCR_Clock	        	/*  internal (fcpu/2) & 32.768 kHz */ \
+                	        	/*  Clocks on GPIO [26:27]         */ \
+                	(4 << FShft (TUCR_TSEL))
+#define TUCR_3_6864MHzA	        	/*  3.6864 MHz osc. on GPIO [27]   */ \
+                	        	/*  (Alternative)                  */ \
+                	(5 << FShft (TUCR_TSEL))
+#define TUCR_MainPLL	        	/*  Main PLL/16 on GPIO [27]       */ \
+                	(6 << FShft (TUCR_TSEL))
+#define TUCR_VDDL	        	/*  VDDL ring osc./4 on GPIO [27]  */ \
+                	(7 << FShft (TUCR_TSEL))
+
+
+/*
+ * General-Purpose Input/Output (GPIO) control registers
+ *
+ * Registers
+ *    GPLR      	General-Purpose Input/Output (GPIO) Pin Level
+ *              	Register (read).
+ *    GPDR      	General-Purpose Input/Output (GPIO) Pin Direction
+ *              	Register (read/write).
+ *    GPSR      	General-Purpose Input/Output (GPIO) Pin output Set
+ *              	Register (write).
+ *    GPCR      	General-Purpose Input/Output (GPIO) Pin output Clear
+ *              	Register (write).
+ *    GRER      	General-Purpose Input/Output (GPIO) Rising-Edge
+ *              	detect Register (read/write).
+ *    GFER      	General-Purpose Input/Output (GPIO) Falling-Edge
+ *              	detect Register (read/write).
+ *    GEDR      	General-Purpose Input/Output (GPIO) Edge Detect
+ *              	status Register (read/write).
+ *    GAFR      	General-Purpose Input/Output (GPIO) Alternate
+ *              	Function Register (read/write).
+ *
+ * Clock
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ */
+
+#define GPLR		__REG(0x90040000)  /* GPIO Pin Level Reg.             */
+#define GPDR		__REG(0x90040004)  /* GPIO Pin Direction Reg.         */
+#define GPSR		__REG(0x90040008)  /* GPIO Pin output Set Reg.        */
+#define GPCR		__REG(0x9004000C)  /* GPIO Pin output Clear Reg.      */
+#define GRER		__REG(0x90040010)  /* GPIO Rising-Edge detect Reg.    */
+#define GFER		__REG(0x90040014)  /* GPIO Falling-Edge detect Reg.   */
+#define GEDR		__REG(0x90040018)  /* GPIO Edge Detect status Reg.    */
+#define GAFR		__REG(0x9004001C)  /* GPIO Alternate Function Reg.    */
+
+#define GPIO_MIN	(0)
+#define GPIO_MAX	(27)
+
+#define GPIO_GPIO(Nb)	        	/* GPIO [0..27]                    */ \
+                	(0x00000001 << (Nb))
+#define GPIO_GPIO0	GPIO_GPIO (0)	/* GPIO  [0]                       */
+#define GPIO_GPIO1	GPIO_GPIO (1)	/* GPIO  [1]                       */
+#define GPIO_GPIO2	GPIO_GPIO (2)	/* GPIO  [2]                       */
+#define GPIO_GPIO3	GPIO_GPIO (3)	/* GPIO  [3]                       */
+#define GPIO_GPIO4	GPIO_GPIO (4)	/* GPIO  [4]                       */
+#define GPIO_GPIO5	GPIO_GPIO (5)	/* GPIO  [5]                       */
+#define GPIO_GPIO6	GPIO_GPIO (6)	/* GPIO  [6]                       */
+#define GPIO_GPIO7	GPIO_GPIO (7)	/* GPIO  [7]                       */
+#define GPIO_GPIO8	GPIO_GPIO (8)	/* GPIO  [8]                       */
+#define GPIO_GPIO9	GPIO_GPIO (9)	/* GPIO  [9]                       */
+#define GPIO_GPIO10	GPIO_GPIO (10)	/* GPIO [10]                       */
+#define GPIO_GPIO11	GPIO_GPIO (11)	/* GPIO [11]                       */
+#define GPIO_GPIO12	GPIO_GPIO (12)	/* GPIO [12]                       */
+#define GPIO_GPIO13	GPIO_GPIO (13)	/* GPIO [13]                       */
+#define GPIO_GPIO14	GPIO_GPIO (14)	/* GPIO [14]                       */
+#define GPIO_GPIO15	GPIO_GPIO (15)	/* GPIO [15]                       */
+#define GPIO_GPIO16	GPIO_GPIO (16)	/* GPIO [16]                       */
+#define GPIO_GPIO17	GPIO_GPIO (17)	/* GPIO [17]                       */
+#define GPIO_GPIO18	GPIO_GPIO (18)	/* GPIO [18]                       */
+#define GPIO_GPIO19	GPIO_GPIO (19)	/* GPIO [19]                       */
+#define GPIO_GPIO20	GPIO_GPIO (20)	/* GPIO [20]                       */
+#define GPIO_GPIO21	GPIO_GPIO (21)	/* GPIO [21]                       */
+#define GPIO_GPIO22	GPIO_GPIO (22)	/* GPIO [22]                       */
+#define GPIO_GPIO23	GPIO_GPIO (23)	/* GPIO [23]                       */
+#define GPIO_GPIO24	GPIO_GPIO (24)	/* GPIO [24]                       */
+#define GPIO_GPIO25	GPIO_GPIO (25)	/* GPIO [25]                       */
+#define GPIO_GPIO26	GPIO_GPIO (26)	/* GPIO [26]                       */
+#define GPIO_GPIO27	GPIO_GPIO (27)	/* GPIO [27]                       */
+
+#define GPIO_LDD(Nb)	        	/* LCD Data [8..15] (O)            */ \
+                	GPIO_GPIO ((Nb) - 6)
+#define GPIO_LDD8	GPIO_LDD (8)	/* LCD Data  [8] (O)               */
+#define GPIO_LDD9	GPIO_LDD (9)	/* LCD Data  [9] (O)               */
+#define GPIO_LDD10	GPIO_LDD (10)	/* LCD Data [10] (O)               */
+#define GPIO_LDD11	GPIO_LDD (11)	/* LCD Data [11] (O)               */
+#define GPIO_LDD12	GPIO_LDD (12)	/* LCD Data [12] (O)               */
+#define GPIO_LDD13	GPIO_LDD (13)	/* LCD Data [13] (O)               */
+#define GPIO_LDD14	GPIO_LDD (14)	/* LCD Data [14] (O)               */
+#define GPIO_LDD15	GPIO_LDD (15)	/* LCD Data [15] (O)               */
+                	        	/* ser. port 4:                    */
+#define GPIO_SSP_TXD	GPIO_GPIO (10)	/*  SSP Transmit Data (O)          */
+#define GPIO_SSP_RXD	GPIO_GPIO (11)	/*  SSP Receive Data (I)           */
+#define GPIO_SSP_SCLK	GPIO_GPIO (12)	/*  SSP Sample CLocK (O)           */
+#define GPIO_SSP_SFRM	GPIO_GPIO (13)	/*  SSP Sample FRaMe (O)           */
+                	        	/* ser. port 1:                    */
+#define GPIO_UART_TXD	GPIO_GPIO (14)	/*  UART Transmit Data (O)         */
+#define GPIO_UART_RXD	GPIO_GPIO (15)	/*  UART Receive Data (I)          */
+#define GPIO_SDLC_SCLK	GPIO_GPIO (16)	/*  SDLC Sample CLocK (I/O)        */
+#define GPIO_SDLC_AAF	GPIO_GPIO (17)	/*  SDLC Abort After Frame (O)     */
+#define GPIO_UART_SCLK1	GPIO_GPIO (18)	/*  UART Sample CLocK 1 (I)        */
+                	        	/* ser. port 4:                    */
+#define GPIO_SSP_CLK	GPIO_GPIO (19)	/*  SSP external CLocK (I)         */
+                	        	/* ser. port 3:                    */
+#define GPIO_UART_SCLK3	GPIO_GPIO (20)	/*  UART Sample CLocK 3 (I)        */
+                	        	/* ser. port 4:                    */
+#define GPIO_MCP_CLK	GPIO_GPIO (21)	/*  MCP CLocK (I)                  */
+                	        	/* test controller:                */
+#define GPIO_TIC_ACK	GPIO_GPIO (21)	/*  TIC ACKnowledge (O)            */
+#define GPIO_MBGNT	GPIO_GPIO (21)	/*  Memory Bus GraNT (O)           */
+#define GPIO_TREQA	GPIO_GPIO (22)	/*  TIC REQuest A (I)              */
+#define GPIO_MBREQ	GPIO_GPIO (22)	/*  Memory Bus REQuest (I)         */
+#define GPIO_TREQB	GPIO_GPIO (23)	/*  TIC REQuest B (I)              */
+#define GPIO_1Hz	GPIO_GPIO (25)	/* 1 Hz clock (O)                  */
+#define GPIO_RCLK	GPIO_GPIO (26)	/* internal (R) CLocK (O, fcpu/2)  */
+#define GPIO_32_768kHz	GPIO_GPIO (27)	/* 32.768 kHz clock (O, RTC)       */
+
+#define GPDR_In 	0       	/* Input                           */
+#define GPDR_Out	1       	/* Output                          */
+
+
+/*
+ * Interrupt Controller (IC) control registers
+ *
+ * Registers
+ *    ICIP      	Interrupt Controller (IC) Interrupt ReQuest (IRQ)
+ *              	Pending register (read).
+ *    ICMR      	Interrupt Controller (IC) Mask Register (read/write).
+ *    ICLR      	Interrupt Controller (IC) Level Register (read/write).
+ *    ICCR      	Interrupt Controller (IC) Control Register
+ *              	(read/write).
+ *              	[The ICCR register is only implemented in versions 2.0
+ *              	(rev. = 8) and higher of the StrongARM SA-1100.]
+ *    ICFP      	Interrupt Controller (IC) Fast Interrupt reQuest
+ *              	(FIQ) Pending register (read).
+ *    ICPR      	Interrupt Controller (IC) Pending Register (read).
+ *              	[The ICPR register is active low (inverted) in
+ *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ *              	StrongARM SA-1100, it is active high (non-inverted) in
+ *              	versions 2.0 (rev. = 8) and higher.]
+ */
+
+#define ICIP		__REG(0x90050000)  /* IC IRQ Pending reg.             */
+#define ICMR		__REG(0x90050004)  /* IC Mask Reg.                    */
+#define ICLR		__REG(0x90050008)  /* IC Level Reg.                   */
+#define ICCR		__REG(0x9005000C)  /* IC Control Reg.                 */
+#define ICFP		__REG(0x90050010)  /* IC FIQ Pending reg.             */
+#define ICPR		__REG(0x90050020)  /* IC Pending Reg.                 */
+
+#define IC_GPIO(Nb)	        	/* GPIO [0..10]                    */ \
+                	(0x00000001 << (Nb))
+#define IC_GPIO0	IC_GPIO (0)	/* GPIO  [0]                       */
+#define IC_GPIO1	IC_GPIO (1)	/* GPIO  [1]                       */
+#define IC_GPIO2	IC_GPIO (2)	/* GPIO  [2]                       */
+#define IC_GPIO3	IC_GPIO (3)	/* GPIO  [3]                       */
+#define IC_GPIO4	IC_GPIO (4)	/* GPIO  [4]                       */
+#define IC_GPIO5	IC_GPIO (5)	/* GPIO  [5]                       */
+#define IC_GPIO6	IC_GPIO (6)	/* GPIO  [6]                       */
+#define IC_GPIO7	IC_GPIO (7)	/* GPIO  [7]                       */
+#define IC_GPIO8	IC_GPIO (8)	/* GPIO  [8]                       */
+#define IC_GPIO9	IC_GPIO (9)	/* GPIO  [9]                       */
+#define IC_GPIO10	IC_GPIO (10)	/* GPIO [10]                       */
+#define IC_GPIO11_27	0x00000800	/* GPIO [11:27] (ORed)             */
+#define IC_LCD  	0x00001000	/* LCD controller                  */
+#define IC_Ser0UDC	0x00002000	/* Ser. port 0 UDC                 */
+#define IC_Ser1SDLC	0x00004000	/* Ser. port 1 SDLC                */
+#define IC_Ser1UART	0x00008000	/* Ser. port 1 UART                */
+#define IC_Ser2ICP	0x00010000	/* Ser. port 2 ICP                 */
+#define IC_Ser3UART	0x00020000	/* Ser. port 3 UART                */
+#define IC_Ser4MCP	0x00040000	/* Ser. port 4 MCP                 */
+#define IC_Ser4SSP	0x00080000	/* Ser. port 4 SSP                 */
+#define IC_DMA(Nb)	        	/* DMA controller channel [0..5]   */ \
+                	(0x00100000 << (Nb))
+#define IC_DMA0 	IC_DMA (0)	/* DMA controller channel 0        */
+#define IC_DMA1 	IC_DMA (1)	/* DMA controller channel 1        */
+#define IC_DMA2 	IC_DMA (2)	/* DMA controller channel 2        */
+#define IC_DMA3 	IC_DMA (3)	/* DMA controller channel 3        */
+#define IC_DMA4 	IC_DMA (4)	/* DMA controller channel 4        */
+#define IC_DMA5 	IC_DMA (5)	/* DMA controller channel 5        */
+#define IC_OST(Nb)	        	/* OS Timer match [0..3]           */ \
+                	(0x04000000 << (Nb))
+#define IC_OST0 	IC_OST (0)	/* OS Timer match 0                */
+#define IC_OST1 	IC_OST (1)	/* OS Timer match 1                */
+#define IC_OST2 	IC_OST (2)	/* OS Timer match 2                */
+#define IC_OST3 	IC_OST (3)	/* OS Timer match 3                */
+#define IC_RTC1Hz	0x40000000	/* RTC 1 Hz clock                  */
+#define IC_RTCAlrm	0x80000000	/* RTC Alarm                       */
+
+#define ICLR_IRQ	0       	/* Interrupt ReQuest               */
+#define ICLR_FIQ	1       	/* Fast Interrupt reQuest          */
+
+#define ICCR_DIM	0x00000001	/* Disable Idle-mode interrupt     */
+                	        	/* Mask                            */
+#define ICCR_IdleAllInt	(ICCR_DIM*0)	/*  Idle-mode All Interrupt enable */
+                	        	/*  (ICMR ignored)                 */
+#define ICCR_IdleMskInt	(ICCR_DIM*1)	/*  Idle-mode non-Masked Interrupt */
+                	        	/*  enable (ICMR used)             */
+
+
+/*
+ * Peripheral Pin Controller (PPC) control registers
+ *
+ * Registers
+ *    PPDR      	Peripheral Pin Controller (PPC) Pin Direction
+ *              	Register (read/write).
+ *    PPSR      	Peripheral Pin Controller (PPC) Pin State Register
+ *              	(read/write).
+ *    PPAR      	Peripheral Pin Controller (PPC) Pin Assignment
+ *              	Register (read/write).
+ *    PSDR      	Peripheral Pin Controller (PPC) Sleep-mode pin
+ *              	Direction Register (read/write).
+ *    PPFR      	Peripheral Pin Controller (PPC) Pin Flag Register
+ *              	(read).
+ */
+
+#define PPDR		__REG(0x90060000)  /* PPC Pin Direction Reg.          */
+#define PPSR		__REG(0x90060004)  /* PPC Pin State Reg.              */
+#define PPAR		__REG(0x90060008)  /* PPC Pin Assignment Reg.         */
+#define PSDR		__REG(0x9006000C)  /* PPC Sleep-mode pin Direction Reg. */
+#define PPFR		__REG(0x90060010)  /* PPC Pin Flag Reg.               */
+
+#define PPC_LDD(Nb)	        	/* LCD Data [0..7]                 */ \
+                	(0x00000001 << (Nb))
+#define PPC_LDD0	PPC_LDD (0)	/* LCD Data [0]                    */
+#define PPC_LDD1	PPC_LDD (1)	/* LCD Data [1]                    */
+#define PPC_LDD2	PPC_LDD (2)	/* LCD Data [2]                    */
+#define PPC_LDD3	PPC_LDD (3)	/* LCD Data [3]                    */
+#define PPC_LDD4	PPC_LDD (4)	/* LCD Data [4]                    */
+#define PPC_LDD5	PPC_LDD (5)	/* LCD Data [5]                    */
+#define PPC_LDD6	PPC_LDD (6)	/* LCD Data [6]                    */
+#define PPC_LDD7	PPC_LDD (7)	/* LCD Data [7]                    */
+#define PPC_L_PCLK	0x00000100	/* LCD Pixel CLocK                 */
+#define PPC_L_LCLK	0x00000200	/* LCD Line CLocK                  */
+#define PPC_L_FCLK	0x00000400	/* LCD Frame CLocK                 */
+#define PPC_L_BIAS	0x00000800	/* LCD AC BIAS                     */
+                	        	/* ser. port 1:                    */
+#define PPC_TXD1	0x00001000	/*  SDLC/UART Transmit Data 1      */
+#define PPC_RXD1	0x00002000	/*  SDLC/UART Receive Data 1       */
+                	        	/* ser. port 2:                    */
+#define PPC_TXD2	0x00004000	/*  IPC Transmit Data 2            */
+#define PPC_RXD2	0x00008000	/*  IPC Receive Data 2             */
+                	        	/* ser. port 3:                    */
+#define PPC_TXD3	0x00010000	/*  UART Transmit Data 3           */
+#define PPC_RXD3	0x00020000	/*  UART Receive Data 3            */
+                	        	/* ser. port 4:                    */
+#define PPC_TXD4	0x00040000	/*  MCP/SSP Transmit Data 4        */
+#define PPC_RXD4	0x00080000	/*  MCP/SSP Receive Data 4         */
+#define PPC_SCLK	0x00100000	/*  MCP/SSP Sample CLocK           */
+#define PPC_SFRM	0x00200000	/*  MCP/SSP Sample FRaMe           */
+
+#define PPDR_In 	0       	/* Input                           */
+#define PPDR_Out	1       	/* Output                          */
+
+                	        	/* ser. port 1:                    */
+#define PPAR_UPR	0x00001000	/*  UART Pin Reassignment          */
+#define PPAR_UARTTR	(PPAR_UPR*0)	/*   UART on TXD_1 & RXD_1         */
+#define PPAR_UARTGPIO	(PPAR_UPR*1)	/*   UART on GPIO [14:15]          */
+                	        	/* ser. port 4:                    */
+#define PPAR_SPR	0x00040000	/*  SSP Pin Reassignment           */
+#define PPAR_SSPTRSS	(PPAR_SPR*0)	/*   SSP on TXD_C, RXD_C, SCLK_C,  */
+                	        	/*   & SFRM_C                      */
+#define PPAR_SSPGPIO	(PPAR_SPR*1)	/*   SSP on GPIO [10:13]           */
+
+#define PSDR_OutL	0       	/* Output Low in sleep mode        */
+#define PSDR_Flt	1       	/* Floating (input) in sleep mode  */
+
+#define PPFR_LCD	0x00000001	/* LCD controller                  */
+#define PPFR_SP1TX	0x00001000	/* Ser. Port 1 SDLC/UART Transmit  */
+#define PPFR_SP1RX	0x00002000	/* Ser. Port 1 SDLC/UART Receive   */
+#define PPFR_SP2TX	0x00004000	/* Ser. Port 2 ICP Transmit        */
+#define PPFR_SP2RX	0x00008000	/* Ser. Port 2 ICP Receive         */
+#define PPFR_SP3TX	0x00010000	/* Ser. Port 3 UART Transmit       */
+#define PPFR_SP3RX	0x00020000	/* Ser. Port 3 UART Receive        */
+#define PPFR_SP4	0x00040000	/* Ser. Port 4 MCP/SSP             */
+#define PPFR_PerEn	0       	/* Peripheral Enabled              */
+#define PPFR_PPCEn	1       	/* PPC Enabled                     */
+
+
+/*
+ * Dynamic Random-Access Memory (DRAM) control registers
+ *
+ * Registers
+ *    MDCNFG    	Memory system: Dynamic Random-Access Memory (DRAM)
+ *              	CoNFiGuration register (read/write).
+ *    MDCAS0    	Memory system: Dynamic Random-Access Memory (DRAM)
+ *              	Column Address Strobe (CAS) shift register 0
+ *              	(read/write).
+ *    MDCAS1    	Memory system: Dynamic Random-Access Memory (DRAM)
+ *              	Column Address Strobe (CAS) shift register 1
+ *              	(read/write).
+ *    MDCAS2    	Memory system: Dynamic Random-Access Memory (DRAM)
+ *              	Column Address Strobe (CAS) shift register 2
+ *              	(read/write).
+ *
+ * Clocks
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
+ *    fcas, Tcas	Frequency, period of the DRAM CAS shift registers.
+ */
+
+#define MDCNFG		__REG(0xA0000000)  /*  DRAM CoNFiGuration reg. */
+#define MDCAS0		__REG(0xA0000004)  /* DRAM CAS shift reg. 0 */
+#define MDCAS1		__REG(0xA0000008)  /* DRAM CAS shift reg. 1 */
+#define MDCAS2		__REG(0xA000000c)  /* DRAM CAS shift reg. 2 */
+
+/* SA1100 MDCNFG values */
+#define MDCNFG_DE(Nb)	        	/* DRAM Enable bank [0..3]         */ \
+                	(0x00000001 << (Nb))
+#define MDCNFG_DE0	MDCNFG_DE (0)	/* DRAM Enable bank 0              */
+#define MDCNFG_DE1	MDCNFG_DE (1)	/* DRAM Enable bank 1              */
+#define MDCNFG_DE2	MDCNFG_DE (2)	/* DRAM Enable bank 2              */
+#define MDCNFG_DE3	MDCNFG_DE (3)	/* DRAM Enable bank 3              */
+#define MDCNFG_DRAC	Fld (2, 4)	/* DRAM Row Address Count - 9      */
+#define MDCNFG_RowAdd(Add)      	/*  Row Address count [9..12]      */ \
+                	(((Add) - 9) << FShft (MDCNFG_DRAC))
+#define MDCNFG_CDB2	0x00000040	/* shift reg. Clock Divide By 2    */
+                	        	/* (fcas = fcpu/2)                 */
+#define MDCNFG_TRP	Fld (4, 7)	/* Time RAS Pre-charge - 1 [Tmem]  */
+#define MDCNFG_PrChrg(Tcpu)     	/*  Pre-Charge time [2..32 Tcpu]   */ \
+                	(((Tcpu) - 2)/2 << FShft (MDCNFG_TRP))
+#define MDCNFG_CeilPrChrg(Tcpu) 	/*  Ceil. of PrChrg [2..32 Tcpu]   */ \
+                	(((Tcpu) - 1)/2 << FShft (MDCNFG_TRP))
+#define MDCNFG_TRASR	Fld (4, 11)	/* Time RAS Refresh - 1 [Tmem]     */
+#define MDCNFG_Ref(Tcpu)        	/*  Refresh time [2..32 Tcpu]      */ \
+                	(((Tcpu) - 2)/2 << FShft (MDCNFG_TRASR))
+#define MDCNFG_CeilRef(Tcpu)    	/*  Ceil. of Ref [2..32 Tcpu]      */ \
+                	(((Tcpu) - 1)/2 << FShft (MDCNFG_TRASR))
+#define MDCNFG_TDL	Fld (2, 15)	/* Time Data Latch [Tcpu]          */
+#define MDCNFG_DataLtch(Tcpu)   	/*  Data Latch delay [0..3 Tcpu]   */ \
+                	((Tcpu) << FShft (MDCNFG_TDL))
+#define MDCNFG_DRI	Fld (15, 17)	/* min. DRAM Refresh Interval/4    */
+                	        	/* [Tmem]                          */
+#define MDCNFG_RefInt(Tcpu)     	/*  min. Refresh Interval          */ \
+                	        	/*  [0..262136 Tcpu]               */ \
+                	((Tcpu)/8 << FShft (MDCNFG_DRI))
+
+/* SA1110 MDCNFG values */
+#define MDCNFG_SA1110_DE0	0x00000001	/* DRAM Enable bank 0        */
+#define MDCNFG_SA1110_DE1	0x00000002 	/* DRAM Enable bank 1        */
+#define MDCNFG_SA1110_DTIM0	0x00000004	/* DRAM timing type 0/1      */
+#define MDCNFG_SA1110_DWID0	0x00000008	/* DRAM bus width 0/1        */
+#define MDCNFG_SA1110_DRAC0	Fld(3, 4)	/* DRAM row addr bit count   */
+                	        		/* bank 0/1                  */
+#define MDCNFG_SA1110_CDB20	0x00000080	/* Mem Clock divide by 2 0/1 */
+#define MDCNFG_SA1110_TRP0	Fld(3, 8)	/* RAS precharge 0/1         */
+#define MDCNFG_SA1110_TDL0	Fld(2, 12)	/* Data input latch after CAS*/
+                	        		/* deassertion 0/1           */
+#define MDCNFG_SA1110_TWR0	Fld(2, 14)	/* SDRAM write recovery 0/1  */
+#define MDCNFG_SA1110_DE2	0x00010000	/* DRAM Enable bank 0        */
+#define MDCNFG_SA1110_DE3	0x00020000 	/* DRAM Enable bank 1        */
+#define MDCNFG_SA1110_DTIM2	0x00040000	/* DRAM timing type 0/1      */
+#define MDCNFG_SA1110_DWID2	0x00080000	/* DRAM bus width 0/1        */
+#define MDCNFG_SA1110_DRAC2	Fld(3, 20)	/* DRAM row addr bit count   */
+                	        		/* bank 0/1                  */
+#define MDCNFG_SA1110_CDB22	0x00800000	/* Mem Clock divide by 2 0/1 */
+#define MDCNFG_SA1110_TRP2	Fld(3, 24)	/* RAS precharge 0/1         */
+#define MDCNFG_SA1110_TDL2	Fld(2, 28)	/* Data input latch after CAS*/
+                	        		/* deassertion 0/1           */
+#define MDCNFG_SA1110_TWR2	Fld(2, 30)	/* SDRAM write recovery 0/1  */
+
+
+/*
+ * Static memory control registers
+ *
+ * Registers
+ *    MSC0      	Memory system: Static memory Control register 0
+ *              	(read/write).
+ *    MSC1      	Memory system: Static memory Control register 1
+ *              	(read/write).
+ *
+ * Clocks
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
+ */
+
+#define MSC0		__REG(0xa0000010)  /* Static memory Control reg. 0 */
+#define MSC1		__REG(0xa0000014)  /* Static memory Control reg. 1 */
+#define MSC2		__REG(0xa000002c)  /* Static memory Control reg. 2, not contiguous   */
+
+#define MSC_Bnk(Nb)	        	/* static memory Bank [0..3]       */ \
+                	Fld (16, ((Nb) Modulo 2)*16)
+#define MSC0_Bnk0	MSC_Bnk (0)	/* static memory Bank 0            */
+#define MSC0_Bnk1	MSC_Bnk (1)	/* static memory Bank 1            */
+#define MSC1_Bnk2	MSC_Bnk (2)	/* static memory Bank 2            */
+#define MSC1_Bnk3	MSC_Bnk (3)	/* static memory Bank 3            */
+
+#define MSC_RT  	Fld (2, 0)	/* ROM/static memory Type          */
+#define MSC_NonBrst	        	/*  Non-Burst static memory        */ \
+                	(0 << FShft (MSC_RT))
+#define MSC_SRAM	        	/*  32-bit byte-writable SRAM      */ \
+                	(1 << FShft (MSC_RT))
+#define MSC_Brst4	        	/*  Burst-of-4 static memory       */ \
+                	(2 << FShft (MSC_RT))
+#define MSC_Brst8	        	/*  Burst-of-8 static memory       */ \
+                	(3 << FShft (MSC_RT))
+#define MSC_RBW 	0x0004  	/* ROM/static memory Bus Width     */
+#define MSC_32BitStMem	(MSC_RBW*0)	/*  32-Bit Static Memory           */
+#define MSC_16BitStMem	(MSC_RBW*1)	/*  16-Bit Static Memory           */
+#define MSC_RDF 	Fld (5, 3)	/* ROM/static memory read Delay    */
+                	        	/* First access - 1(.5) [Tmem]     */
+#define MSC_1stRdAcc(Tcpu)      	/*  1st Read Access time (burst    */ \
+                	        	/*  static memory) [3..65 Tcpu]    */ \
+                	((((Tcpu) - 3)/2) << FShft (MSC_RDF))
+#define MSC_Ceil1stRdAcc(Tcpu)  	/*  Ceil. of 1stRdAcc [3..65 Tcpu] */ \
+                	((((Tcpu) - 2)/2) << FShft (MSC_RDF))
+#define MSC_RdAcc(Tcpu)	        	/*  Read Access time (non-burst    */ \
+                	        	/*  static memory) [2..64 Tcpu]    */ \
+                	((((Tcpu) - 2)/2) << FShft (MSC_RDF))
+#define MSC_CeilRdAcc(Tcpu)     	/*  Ceil. of RdAcc [2..64 Tcpu]    */ \
+                	((((Tcpu) - 1)/2) << FShft (MSC_RDF))
+#define MSC_RDN 	Fld (5, 8)	/* ROM/static memory read Delay    */
+                	        	/* Next access - 1 [Tmem]          */
+#define MSC_NxtRdAcc(Tcpu)      	/*  Next Read Access time (burst   */ \
+                	        	/*  static memory) [2..64 Tcpu]    */ \
+                	((((Tcpu) - 2)/2) << FShft (MSC_RDN))
+#define MSC_CeilNxtRdAcc(Tcpu)  	/*  Ceil. of NxtRdAcc [2..64 Tcpu] */ \
+                	((((Tcpu) - 1)/2) << FShft (MSC_RDN))
+#define MSC_WrAcc(Tcpu)	        	/*  Write Access time (non-burst   */ \
+                	        	/*  static memory) [2..64 Tcpu]    */ \
+                	((((Tcpu) - 2)/2) << FShft (MSC_RDN))
+#define MSC_CeilWrAcc(Tcpu)     	/*  Ceil. of WrAcc [2..64 Tcpu]    */ \
+                	((((Tcpu) - 1)/2) << FShft (MSC_RDN))
+#define MSC_RRR 	Fld (3, 13)	/* ROM/static memory RecoveRy      */
+                	        	/* time/2 [Tmem]                   */
+#define MSC_Rec(Tcpu)	        	/*  Recovery time [0..28 Tcpu]     */ \
+                	(((Tcpu)/4) << FShft (MSC_RRR))
+#define MSC_CeilRec(Tcpu)       	/*  Ceil. of Rec [0..28 Tcpu]      */ \
+                	((((Tcpu) + 3)/4) << FShft (MSC_RRR))
+
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) control
+ * register
+ *
+ * Register
+ *    MECR      	Memory system: Expansion memory bus (PCMCIA)
+ *              	Configuration Register (read/write).
+ *
+ * Clocks
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
+ *    fbclk, Tbclk	Frequency, period of the PCMCIA clock (BCLK).
+ */
+
+                	        	/* Memory system:                  */
+#define MECR		__REG(0xA0000018)  /*  Expansion memory bus (PCMCIA) Configuration Reg.             */
+
+#define MECR_PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
+                	Fld (15, (Nb)*16)
+#define MECR_PCMCIA0	MECR_PCMCIA (0)	/* PCMCIA 0                        */
+#define MECR_PCMCIA1	MECR_PCMCIA (1)	/* PCMCIA 1                        */
+
+#define MECR_BSIO	Fld (5, 0)	/* BCLK Select I/O - 1 [Tmem]      */
+#define MECR_IOClk(Tcpu)        	/*  I/O Clock [2..64 Tcpu]         */ \
+                	((((Tcpu) - 2)/2) << FShft (MECR_BSIO))
+#define MECR_CeilIOClk(Tcpu)    	/*  Ceil. of IOClk [2..64 Tcpu]    */ \
+                	((((Tcpu) - 1)/2) << FShft (MECR_BSIO))
+#define MECR_BSA	Fld (5, 5)	/* BCLK Select Attribute - 1       */
+                	        	/* [Tmem]                          */
+#define MECR_AttrClk(Tcpu)      	/*  Attribute Clock [2..64 Tcpu]   */ \
+                	((((Tcpu) - 2)/2) << FShft (MECR_BSA))
+#define MECR_CeilAttrClk(Tcpu)  	/*  Ceil. of AttrClk [2..64 Tcpu]  */ \
+                	((((Tcpu) - 1)/2) << FShft (MECR_BSA))
+#define MECR_BSM	Fld (5, 10)	/* BCLK Select Memory - 1 [Tmem]   */
+#define MECR_MemClk(Tcpu)       	/*  Memory Clock [2..64 Tcpu]      */ \
+                	((((Tcpu) - 2)/2) << FShft (MECR_BSM))
+#define MECR_CeilMemClk(Tcpu)   	/*  Ceil. of MemClk [2..64 Tcpu]   */ \
+                	((((Tcpu) - 1)/2) << FShft (MECR_BSM))
+
+/*
+ * On SA1110 only
+ */
+
+#define MDREFR		__REG(0xA000001C)
+
+#define MDREFR_TRASR		Fld (4, 0)
+#define MDREFR_DRI		Fld (12, 4)
+#define MDREFR_E0PIN		(1 << 16)
+#define MDREFR_K0RUN		(1 << 17)
+#define MDREFR_K0DB2		(1 << 18)
+#define MDREFR_E1PIN		(1 << 20)
+#define MDREFR_K1RUN		(1 << 21)
+#define MDREFR_K1DB2		(1 << 22)
+#define MDREFR_K2RUN		(1 << 25)
+#define MDREFR_K2DB2		(1 << 26)
+#define MDREFR_EAPD		(1 << 28)
+#define MDREFR_KAPD		(1 << 29)
+#define MDREFR_SLFRSH		(1 << 31)
+
+
+/*
+ * Direct Memory Access (DMA) control registers
+ *
+ * Registers
+ *    DDAR0     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 0 (read/write).
+ *    DCSR0     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 0 (read/write).
+ *    DBSA0     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 0 (read/write).
+ *    DBTA0     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 0 (read/write).
+ *    DBSB0     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 0 (read/write).
+ *    DBTB0     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 0 (read/write).
+ *
+ *    DDAR1     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 1 (read/write).
+ *    DCSR1     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 1 (read/write).
+ *    DBSA1     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 1 (read/write).
+ *    DBTA1     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 1 (read/write).
+ *    DBSB1     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 1 (read/write).
+ *    DBTB1     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 1 (read/write).
+ *
+ *    DDAR2     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 2 (read/write).
+ *    DCSR2     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 2 (read/write).
+ *    DBSA2     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 2 (read/write).
+ *    DBTA2     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 2 (read/write).
+ *    DBSB2     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 2 (read/write).
+ *    DBTB2     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 2 (read/write).
+ *
+ *    DDAR3     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 3 (read/write).
+ *    DCSR3     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 3 (read/write).
+ *    DBSA3     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 3 (read/write).
+ *    DBTA3     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 3 (read/write).
+ *    DBSB3     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 3 (read/write).
+ *    DBTB3     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 3 (read/write).
+ *
+ *    DDAR4     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 4 (read/write).
+ *    DCSR4     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 4 (read/write).
+ *    DBSA4     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 4 (read/write).
+ *    DBTA4     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 4 (read/write).
+ *    DBSB4     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 4 (read/write).
+ *    DBTB4     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 4 (read/write).
+ *
+ *    DDAR5     	Direct Memory Access (DMA) Device Address Register
+ *              	channel 5 (read/write).
+ *    DCSR5     	Direct Memory Access (DMA) Control and Status
+ *              	Register channel 5 (read/write).
+ *    DBSA5     	Direct Memory Access (DMA) Buffer Start address
+ *              	register A channel 5 (read/write).
+ *    DBTA5     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register A channel 5 (read/write).
+ *    DBSB5     	Direct Memory Access (DMA) Buffer Start address
+ *              	register B channel 5 (read/write).
+ *    DBTB5     	Direct Memory Access (DMA) Buffer Transfer count
+ *              	register B channel 5 (read/write).
+ */
+
+#define DMASp   	0x00000020	/* DMA control reg. Space [byte]   */
+
+#define DDAR(Nb)	__REG(0xB0000000 + (Nb)*DMASp)  /* DMA Device Address Reg. channel [0..5] */
+#define SetDCSR(Nb)	__REG(0xB0000004 + (Nb)*DMASp)  /* Set DMA Control & Status Reg. channel [0..5] (write) */
+#define ClrDCSR(Nb)	__REG(0xB0000008 + (Nb)*DMASp)  /* Clear DMA Control & Status Reg. channel [0..5] (write) */
+#define RdDCSR(Nb)	__REG(0xB000000C + (Nb)*DMASp)  /* Read DMA Control & Status Reg. channel [0..5] (read) */
+#define DBSA(Nb)	__REG(0xB0000010 + (Nb)*DMASp)  /* DMA Buffer Start address reg. A channel [0..5] */
+#define DBTA(Nb)	__REG(0xB0000014 + (Nb)*DMASp)  /* DMA Buffer Transfer count reg. A channel [0..5] */
+#define DBSB(Nb)	__REG(0xB0000018 + (Nb)*DMASp)  /* DMA Buffer Start address reg. B channel [0..5] */
+#define DBTB(Nb)	__REG(0xB000001C + (Nb)*DMASp)  /* DMA Buffer Transfer count reg. B channel [0..5] */
+
+#define DDAR_RW 	0x00000001	/* device data Read/Write          */
+#define DDAR_DevWr	(DDAR_RW*0)	/*  Device data Write              */
+                	        	/*  (memory -> device)             */
+#define DDAR_DevRd	(DDAR_RW*1)	/*  Device data Read               */
+                	        	/*  (device -> memory)             */
+#define DDAR_E  	0x00000002	/* big/little Endian device        */
+#define DDAR_LtlEnd	(DDAR_E*0)	/*  Little Endian device           */
+#define DDAR_BigEnd	(DDAR_E*1)	/*  Big Endian device              */
+#define DDAR_BS 	0x00000004	/* device Burst Size               */
+#define DDAR_Brst4	(DDAR_BS*0)	/*  Burst-of-4 device              */
+#define DDAR_Brst8	(DDAR_BS*1)	/*  Burst-of-8 device              */
+#define DDAR_DW 	0x00000008	/* device Data Width               */
+#define DDAR_8BitDev	(DDAR_DW*0)	/*  8-Bit Device                   */
+#define DDAR_16BitDev	(DDAR_DW*1)	/*  16-Bit Device                  */
+#define DDAR_DS 	Fld (4, 4)	/* Device Select                   */
+#define DDAR_Ser0UDCTr	        	/*  Ser. port 0 UDC Transmit       */ \
+                	(0x0 << FShft (DDAR_DS))
+#define DDAR_Ser0UDCRc	        	/*  Ser. port 0 UDC Receive        */ \
+                	(0x1 << FShft (DDAR_DS))
+#define DDAR_Ser1SDLCTr	        	/*  Ser. port 1 SDLC Transmit      */ \
+                	(0x2 << FShft (DDAR_DS))
+#define DDAR_Ser1SDLCRc	        	/*  Ser. port 1 SDLC Receive       */ \
+                	(0x3 << FShft (DDAR_DS))
+#define DDAR_Ser1UARTTr	        	/*  Ser. port 1 UART Transmit      */ \
+                	(0x4 << FShft (DDAR_DS))
+#define DDAR_Ser1UARTRc	        	/*  Ser. port 1 UART Receive       */ \
+                	(0x5 << FShft (DDAR_DS))
+#define DDAR_Ser2ICPTr	        	/*  Ser. port 2 ICP Transmit       */ \
+                	(0x6 << FShft (DDAR_DS))
+#define DDAR_Ser2ICPRc	        	/*  Ser. port 2 ICP Receive        */ \
+                	(0x7 << FShft (DDAR_DS))
+#define DDAR_Ser3UARTTr	        	/*  Ser. port 3 UART Transmit      */ \
+                	(0x8 << FShft (DDAR_DS))
+#define DDAR_Ser3UARTRc	        	/*  Ser. port 3 UART Receive       */ \
+                	(0x9 << FShft (DDAR_DS))
+#define DDAR_Ser4MCP0Tr	        	/*  Ser. port 4 MCP 0 Transmit     */ \
+                	        	/*  (audio)                        */ \
+                	(0xA << FShft (DDAR_DS))
+#define DDAR_Ser4MCP0Rc	        	/*  Ser. port 4 MCP 0 Receive      */ \
+                	        	/*  (audio)                        */ \
+                	(0xB << FShft (DDAR_DS))
+#define DDAR_Ser4MCP1Tr	        	/*  Ser. port 4 MCP 1 Transmit     */ \
+                	        	/*  (telecom)                      */ \
+                	(0xC << FShft (DDAR_DS))
+#define DDAR_Ser4MCP1Rc	        	/*  Ser. port 4 MCP 1 Receive      */ \
+                	        	/*  (telecom)                      */ \
+                	(0xD << FShft (DDAR_DS))
+#define DDAR_Ser4SSPTr	        	/*  Ser. port 4 SSP Transmit       */ \
+                	(0xE << FShft (DDAR_DS))
+#define DDAR_Ser4SSPRc	        	/*  Ser. port 4 SSP Receive        */ \
+                	(0xF << FShft (DDAR_DS))
+#define DDAR_DA 	Fld (24, 8)	/* Device Address                  */
+#define DDAR_DevAdd(Add)        	/*  Device Address                 */ \
+                	(((Add) & 0xF0000000) | \
+                	 (((Add) & 0X003FFFFC) << (FShft (DDAR_DA) - 2)))
+#define DDAR_Ser0UDCWr	        	/* Ser. port 0 UDC Write           */ \
+                	(DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
+                	 DDAR_Ser0UDCTr + DDAR_DevAdd (__PREG(Ser0UDCDR)))
+#define DDAR_Ser0UDCRd	        	/* Ser. port 0 UDC Read            */ \
+                	(DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
+                	 DDAR_Ser0UDCRc + DDAR_DevAdd (__PREG(Ser0UDCDR)))
+#define DDAR_Ser1UARTWr	        	/* Ser. port 1 UART Write          */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser1UARTTr + DDAR_DevAdd (__PREG(Ser1UTDR)))
+#define DDAR_Ser1UARTRd	        	/* Ser. port 1 UART Read           */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser1UARTRc + DDAR_DevAdd (__PREG(Ser1UTDR)))
+#define DDAR_Ser1SDLCWr	        	/* Ser. port 1 SDLC Write          */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser1SDLCTr + DDAR_DevAdd (__PREG(Ser1SDDR)))
+#define DDAR_Ser1SDLCRd	        	/* Ser. port 1 SDLC Read           */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser1SDLCRc + DDAR_DevAdd (__PREG(Ser1SDDR)))
+#define DDAR_Ser2UARTWr	        	/* Ser. port 2 UART Write          */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2UTDR)))
+#define DDAR_Ser2UARTRd	        	/* Ser. port 2 UART Read           */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2UTDR)))
+#define DDAR_Ser2HSSPWr	        	/* Ser. port 2 HSSP Write          */ \
+                	(DDAR_DevWr + DDAR_Brst8 + DDAR_8BitDev + \
+                	 DDAR_Ser2ICPTr + DDAR_DevAdd (__PREG(Ser2HSDR)))
+#define DDAR_Ser2HSSPRd	        	/* Ser. port 2 HSSP Read           */ \
+                	(DDAR_DevRd + DDAR_Brst8 + DDAR_8BitDev + \
+                	 DDAR_Ser2ICPRc + DDAR_DevAdd (__PREG(Ser2HSDR)))
+#define DDAR_Ser3UARTWr	        	/* Ser. port 3 UART Write          */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser3UARTTr + DDAR_DevAdd (__PREG(Ser3UTDR)))
+#define DDAR_Ser3UARTRd	        	/* Ser. port 3 UART Read           */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev + \
+                	 DDAR_Ser3UARTRc + DDAR_DevAdd (__PREG(Ser3UTDR)))
+#define DDAR_Ser4MCP0Wr	        	/* Ser. port 4 MCP 0 Write (audio) */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4MCP0Tr + DDAR_DevAdd (__PREG(Ser4MCDR0)))
+#define DDAR_Ser4MCP0Rd	        	/* Ser. port 4 MCP 0 Read (audio)  */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4MCP0Rc + DDAR_DevAdd (__PREG(Ser4MCDR0)))
+#define DDAR_Ser4MCP1Wr	        	/* Ser. port 4 MCP 1 Write         */ \
+                	        	/* (telecom)                       */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4MCP1Tr + DDAR_DevAdd (__PREG(Ser4MCDR1)))
+#define DDAR_Ser4MCP1Rd	        	/* Ser. port 4 MCP 1 Read          */ \
+                	        	/* (telecom)                       */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4MCP1Rc + DDAR_DevAdd (__PREG(Ser4MCDR1)))
+#define DDAR_Ser4SSPWr	        	/* Ser. port 4 SSP Write (16 bits) */ \
+                	(DDAR_DevWr + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4SSPTr + DDAR_DevAdd (__PREG(Ser4SSDR)))
+#define DDAR_Ser4SSPRd	        	/* Ser. port 4 SSP Read (16 bits)  */ \
+                	(DDAR_DevRd + DDAR_Brst4 + DDAR_16BitDev + \
+                	 DDAR_Ser4SSPRc + DDAR_DevAdd (__PREG(Ser4SSDR)))
+
+#define DCSR_RUN	0x00000001	/* DMA RUNing                      */
+#define DCSR_IE 	0x00000002	/* DMA Interrupt Enable            */
+#define DCSR_ERROR	0x00000004	/* DMA ERROR                       */
+#define DCSR_DONEA	0x00000008	/* DONE DMA transfer buffer A      */
+#define DCSR_STRTA	0x00000010	/* STaRTed DMA transfer buffer A   */
+#define DCSR_DONEB	0x00000020	/* DONE DMA transfer buffer B      */
+#define DCSR_STRTB	0x00000040	/* STaRTed DMA transfer buffer B   */
+#define DCSR_BIU	0x00000080	/* DMA Buffer In Use               */
+#define DCSR_BufA	(DCSR_BIU*0)	/*  DMA Buffer A in use            */
+#define DCSR_BufB	(DCSR_BIU*1)	/*  DMA Buffer B in use            */
+
+#define DBT_TC  	Fld (13, 0)	/* Transfer Count                  */
+#define DBTA_TCA	DBT_TC  	/* Transfer Count buffer A         */
+#define DBTB_TCB	DBT_TC  	/* Transfer Count buffer B         */
+
+
+/*
+ * Liquid Crystal Display (LCD) control registers
+ *
+ * Registers
+ *    LCCR0     	Liquid Crystal Display (LCD) Control Register 0
+ *              	(read/write).
+ *              	[Bits LDM, BAM, and ERM are only implemented in
+ *              	versions 2.0 (rev. = 8) and higher of the StrongARM
+ *              	SA-1100.]
+ *    LCSR      	Liquid Crystal Display (LCD) Status Register
+ *              	(read/write).
+ *              	[Bit LDD can be only read in versions 1.0 (rev. = 1)
+ *              	and 1.1 (rev. = 2) of the StrongARM SA-1100, it can be
+ *              	read and written (cleared) in versions 2.0 (rev. = 8)
+ *              	and higher.]
+ *    DBAR1     	Liquid Crystal Display (LCD) Direct Memory Access
+ *              	(DMA) Base Address Register channel 1 (read/write).
+ *    DCAR1     	Liquid Crystal Display (LCD) Direct Memory Access
+ *              	(DMA) Current Address Register channel 1 (read).
+ *    DBAR2     	Liquid Crystal Display (LCD) Direct Memory Access
+ *              	(DMA) Base Address Register channel 2 (read/write).
+ *    DCAR2     	Liquid Crystal Display (LCD) Direct Memory Access
+ *              	(DMA) Current Address Register channel 2 (read).
+ *    LCCR1     	Liquid Crystal Display (LCD) Control Register 1
+ *              	(read/write).
+ *              	[The LCCR1 register can be only written in
+ *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ *              	StrongARM SA-1100, it can be written and read in
+ *              	versions 2.0 (rev. = 8) and higher.]
+ *    LCCR2     	Liquid Crystal Display (LCD) Control Register 2
+ *              	(read/write).
+ *              	[The LCCR1 register can be only written in
+ *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ *              	StrongARM SA-1100, it can be written and read in
+ *              	versions 2.0 (rev. = 8) and higher.]
+ *    LCCR3     	Liquid Crystal Display (LCD) Control Register 3
+ *              	(read/write).
+ *              	[The LCCR1 register can be only written in
+ *              	versions 1.0 (rev. = 1) and 1.1 (rev. = 2) of the
+ *              	StrongARM SA-1100, it can be written and read in
+ *              	versions 2.0 (rev. = 8) and higher. Bit PCP is only
+ *              	implemented in versions 2.0 (rev. = 8) and higher of
+ *              	the StrongARM SA-1100.]
+ *
+ * Clocks
+ *    fcpu, Tcpu	Frequency, period of the CPU core clock (CCLK).
+ *    fmem, Tmem	Frequency, period of the memory clock (fmem = fcpu/2).
+ *    fpix, Tpix	Frequency, period of the pixel clock.
+ *    fln, Tln  	Frequency, period of the line clock.
+ *    fac, Tac  	Frequency, period of the AC bias clock.
+ */
+
+#define LCD_PEntrySp	2       	/* LCD Palette Entry Space [byte]  */
+#define LCD_4BitPSp	        	/* LCD 4-Bit pixel Palette Space   */ \
+                	        	/* [byte]                          */ \
+                	(16*LCD_PEntrySp)
+#define LCD_8BitPSp	        	/* LCD 8-Bit pixel Palette Space   */ \
+                	        	/* [byte]                          */ \
+                	(256*LCD_PEntrySp)
+#define LCD_12_16BitPSp	        	/* LCD 12/16-Bit pixel             */ \
+                	        	/* dummy-Palette Space [byte]      */ \
+                	(16*LCD_PEntrySp)
+
+#define LCD_PGrey	Fld (4, 0)	/* LCD Palette entry Grey value    */
+#define LCD_PBlue	Fld (4, 0)	/* LCD Palette entry Blue value    */
+#define LCD_PGreen	Fld (4, 4)	/* LCD Palette entry Green value   */
+#define LCD_PRed	Fld (4, 8)	/* LCD Palette entry Red value     */
+#define LCD_PBS 	Fld (2, 12)	/* LCD Pixel Bit Size              */
+#define LCD_4Bit	        	/*  LCD 4-Bit pixel mode           */ \
+                	(0 << FShft (LCD_PBS))
+#define LCD_8Bit	        	/*  LCD 8-Bit pixel mode           */ \
+                	(1 << FShft (LCD_PBS))
+#define LCD_12_16Bit	        	/*  LCD 12/16-Bit pixel mode       */ \
+                	(2 << FShft (LCD_PBS))
+
+#define LCD_Int0_0	0x0     	/* LCD Intensity =   0.0% =  0     */
+#define LCD_Int11_1	0x1     	/* LCD Intensity =  11.1% =  1/9   */
+#define LCD_Int20_0	0x2     	/* LCD Intensity =  20.0% =  1/5   */
+#define LCD_Int26_7	0x3     	/* LCD Intensity =  26.7% =  4/15  */
+#define LCD_Int33_3	0x4     	/* LCD Intensity =  33.3% =  3/9   */
+#define LCD_Int40_0	0x5     	/* LCD Intensity =  40.0% =  2/5   */
+#define LCD_Int44_4	0x6     	/* LCD Intensity =  44.4% =  4/9   */
+#define LCD_Int50_0	0x7     	/* LCD Intensity =  50.0% =  1/2   */
+#define LCD_Int55_6	0x8     	/* LCD Intensity =  55.6% =  5/9   */
+#define LCD_Int60_0	0x9     	/* LCD Intensity =  60.0% =  3/5   */
+#define LCD_Int66_7	0xA     	/* LCD Intensity =  66.7% =  6/9   */
+#define LCD_Int73_3	0xB     	/* LCD Intensity =  73.3% = 11/15  */
+#define LCD_Int80_0	0xC     	/* LCD Intensity =  80.0% =  4/5   */
+#define LCD_Int88_9	0xD     	/* LCD Intensity =  88.9% =  8/9   */
+#define LCD_Int100_0	0xE     	/* LCD Intensity = 100.0% =  1     */
+#define LCD_Int100_0A	0xF     	/* LCD Intensity = 100.0% =  1     */
+                	        	/* (Alternative)                   */
+
+#define LCCR0		__REG(0xB0100000)  /* LCD Control Reg. 0 */
+#define LCSR		__REG(0xB0100004)  /* LCD Status Reg. */
+#define DBAR1		__REG(0xB0100010)  /* LCD DMA Base Address Reg. channel 1 */
+#define DCAR1		__REG(0xB0100014)  /* LCD DMA Current Address Reg. channel 1 */
+#define DBAR2		__REG(0xB0100018)  /* LCD DMA Base Address Reg.  channel 2 */
+#define DCAR2		__REG(0xB010001C)  /* LCD DMA Current Address Reg. channel 2 */
+#define LCCR1		__REG(0xB0100020)  /* LCD Control Reg. 1 */
+#define LCCR2		__REG(0xB0100024)  /* LCD Control Reg. 2 */
+#define LCCR3		__REG(0xB0100028)  /* LCD Control Reg. 3 */
+
+#define LCCR0_LEN	0x00000001	/* LCD ENable                      */
+#define LCCR0_CMS	0x00000002	/* Color/Monochrome display Select */
+#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display                  */
+#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display             */
+#define LCCR0_SDS	0x00000004	/* Single/Dual panel display       */
+                	        	/* Select                          */
+#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display           */
+#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display             */
+#define LCCR0_LDM	0x00000008	/* LCD Disable done (LDD)          */
+                	        	/* interrupt Mask (disable)        */
+#define LCCR0_BAM	0x00000010	/* Base Address update (BAU)       */
+                	        	/* interrupt Mask (disable)        */
+#define LCCR0_ERM	0x00000020	/* LCD ERror (BER, IOL, IUL, IOU,  */
+                	        	/* IUU, OOL, OUL, OOU, and OUU)    */
+                	        	/* interrupt Mask (disable)        */
+#define LCCR0_PAS	0x00000080	/* Passive/Active display Select   */
+#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN)          */
+#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT)           */
+#define LCCR0_BLE	0x00000100	/* Big/Little Endian select        */
+#define LCCR0_LtlEnd	(LCCR0_BLE*0)	/*  Little Endian frame buffer     */
+#define LCCR0_BigEnd	(LCCR0_BLE*1)	/*  Big Endian frame buffer        */
+#define LCCR0_DPD	0x00000200	/* Double Pixel Data (monochrome   */
+                	        	/* display mode)                   */
+#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome       */
+                	        	/*  display                        */
+#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome       */
+                	        	/*  display                        */
+#define LCCR0_PDD	Fld (8, 12)	/* Palette DMA request Delay       */
+                	        	/* [Tmem]                          */
+#define LCCR0_DMADel(Tcpu)      	/*  palette DMA request Delay      */ \
+                	        	/*  [0..510 Tcpu]                  */ \
+                	((Tcpu)/2 << FShft (LCCR0_PDD))
+
+#define LCSR_LDD	0x00000001	/* LCD Disable Done                */
+#define LCSR_BAU	0x00000002	/* Base Address Update (read)      */
+#define LCSR_BER	0x00000004	/* Bus ERror                       */
+#define LCSR_ABC	0x00000008	/* AC Bias clock Count             */
+#define LCSR_IOL	0x00000010	/* Input FIFO Over-run Lower       */
+                	        	/* panel                           */
+#define LCSR_IUL	0x00000020	/* Input FIFO Under-run Lower      */
+                	        	/* panel                           */
+#define LCSR_IOU	0x00000040	/* Input FIFO Over-run Upper       */
+                	        	/* panel                           */
+#define LCSR_IUU	0x00000080	/* Input FIFO Under-run Upper      */
+                	        	/* panel                           */
+#define LCSR_OOL	0x00000100	/* Output FIFO Over-run Lower      */
+                	        	/* panel                           */
+#define LCSR_OUL	0x00000200	/* Output FIFO Under-run Lower     */
+                	        	/* panel                           */
+#define LCSR_OOU	0x00000400	/* Output FIFO Over-run Upper      */
+                	        	/* panel                           */
+#define LCSR_OUU	0x00000800	/* Output FIFO Under-run Upper     */
+                	        	/* panel                           */
+
+#define LCCR1_PPL	Fld (6, 4)	/* Pixels Per Line/16 - 1          */
+#define LCCR1_DisWdth(Pixel)    	/*  Display Width [16..1024 pix.]  */ \
+                	(((Pixel) - 16)/16 << FShft (LCCR1_PPL))
+#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization      */
+                	        	/* pulse Width - 1 [Tpix] (L_LCLK) */
+#define LCCR1_HorSnchWdth(Tpix) 	/*  Horizontal Synchronization     */ \
+                	        	/*  pulse Width [1..64 Tpix]       */ \
+                	(((Tpix) - 1) << FShft (LCCR1_HSW))
+#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait    */
+                	        	/* count - 1 [Tpix]                */
+#define LCCR1_EndLnDel(Tpix)    	/*  End-of-Line Delay              */ \
+                	        	/*  [1..256 Tpix]                  */ \
+                	(((Tpix) - 1) << FShft (LCCR1_ELW))
+#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock   */
+                	        	/* Wait count - 1 [Tpix]           */
+#define LCCR1_BegLnDel(Tpix)    	/*  Beginning-of-Line Delay        */ \
+                	        	/*  [1..256 Tpix]                  */ \
+                	(((Tpix) - 1) << FShft (LCCR1_BLW))
+
+#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1              */
+#define LCCR2_DisHght(Line)     	/*  Display Height [1..1024 lines] */ \
+                	(((Line) - 1) << FShft (LCCR2_LPP))
+#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse  */
+                	        	/* Width - 1 [Tln] (L_FCLK)        */
+#define LCCR2_VrtSnchWdth(Tln)  	/*  Vertical Synchronization pulse */ \
+                	        	/*  Width [1..64 Tln]              */ \
+                	(((Tln) - 1) << FShft (LCCR2_VSW))
+#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait    */
+                	        	/* count [Tln]                     */
+#define LCCR2_EndFrmDel(Tln)    	/*  End-of-Frame Delay             */ \
+                	        	/*  [0..255 Tln]                   */ \
+                	((Tln) << FShft (LCCR2_EFW))
+#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock   */
+                	        	/* Wait count [Tln]                */
+#define LCCR2_BegFrmDel(Tln)    	/*  Beginning-of-Frame Delay       */ \
+                	        	/*  [0..255 Tln]                   */ \
+                	((Tln) << FShft (LCCR2_BFW))
+
+#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor/2 - 2       */
+                	        	/* [1..255] (L_PCLK)               */
+                	        	/* fpix = fcpu/(2*(PCD + 2))       */
+                	        	/* Tpix = 2*(PCD + 2)*Tcpu         */
+#define LCCR3_PixClkDiv(Div)    	/*  Pixel Clock Divisor [6..514]   */ \
+                	(((Div) - 4)/2 << FShft (LCCR3_PCD))
+                	        	/*  fpix = fcpu/(2*Floor (Div/2))  */
+                	        	/*  Tpix = 2*Floor (Div/2)*Tcpu    */
+#define LCCR3_CeilPixClkDiv(Div)	/*  Ceil. of PixClkDiv [6..514]    */ \
+                	(((Div) - 3)/2 << FShft (LCCR3_PCD))
+                	        	/*  fpix = fcpu/(2*Ceil (Div/2))   */
+                	        	/*  Tpix = 2*Ceil (Div/2)*Tcpu     */
+#define LCCR3_ACB	Fld (8, 8)	/* AC Bias clock half period - 1   */
+                	        	/* [Tln] (L_BIAS)                  */
+#define LCCR3_ACBsDiv(Div)      	/*  AC Bias clock Divisor [2..512] */ \
+                	(((Div) - 2)/2 << FShft (LCCR3_ACB))
+                	        	/*  fac = fln/(2*Floor (Div/2))    */
+                	        	/*  Tac = 2*Floor (Div/2)*Tln      */
+#define LCCR3_CeilACBsDiv(Div)  	/*  Ceil. of ACBsDiv [2..512]      */ \
+                	(((Div) - 1)/2 << FShft (LCCR3_ACB))
+                	        	/*  fac = fln/(2*Ceil (Div/2))     */
+                	        	/*  Tac = 2*Ceil (Div/2)*Tln       */
+#define LCCR3_API	Fld (4, 16)	/* AC bias Pin transitions per     */
+                	        	/* Interrupt                       */
+#define LCCR3_ACBsCntOff        	/*  AC Bias clock transition Count */ \
+                	        	/*  Off                            */ \
+                	(0 << FShft (LCCR3_API))
+#define LCCR3_ACBsCnt(Trans)    	/*  AC Bias clock transition Count */ \
+                	        	/*  [1..15]                        */ \
+                	((Trans) << FShft (LCCR3_API))
+#define LCCR3_VSP	0x00100000	/* Vertical Synchronization pulse  */
+                	        	/* Polarity (L_FCLK)               */
+#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  Vertical Synchronization pulse */
+                	        	/*  active High                    */
+#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  Vertical Synchronization pulse */
+                	        	/*  active Low                     */
+#define LCCR3_HSP	0x00200000	/* Horizontal Synchronization      */
+                	        	/* pulse Polarity (L_LCLK)         */
+#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  Horizontal Synchronization     */
+                	        	/*  pulse active High              */
+#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  Horizontal Synchronization     */
+                	        	/*  pulse active Low               */
+#define LCCR3_PCP	0x00400000	/* Pixel Clock Polarity (L_PCLK)   */
+#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge        */
+#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge       */
+#define LCCR3_OEP	0x00800000	/* Output Enable Polarity (L_BIAS, */
+                	        	/* active display mode)            */
+#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High      */
+#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low       */
+
+#ifndef __ASSEMBLY__
+extern unsigned int processor_id;
+#endif
+
+#define CPU_REVISION	(processor_id & 15)
+#define CPU_SA1110_A0	(0)
+#define CPU_SA1110_B0	(4)
+#define CPU_SA1110_B1	(5)
+#define CPU_SA1110_B2	(6)
+#define CPU_SA1110_B4	(8)
+
+#define CPU_SA1100_ID	(0x4401a110)
+#define CPU_SA1100_MASK	(0xfffffff0)
+#define CPU_SA1110_ID	(0x6901b110)
+#define CPU_SA1110_MASK	(0xfffffff0)
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1101.h b/arch/arm/mach-sa1100/include/mach/SA-1101.h
new file mode 100644
index 000000000000..5d2ad7db991c
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/SA-1101.h
@@ -0,0 +1,925 @@
+/*
+ * SA-1101.h
+ *
+ * Copyright (c) Peter Danielsson 1999
+ *
+ * Definition of constants related to the sa1101
+ * support chip for the sa1100
+ *
+ */
+
+
+/* Be sure that virtual mapping is defined right */
+#ifndef __ASM_ARCH_HARDWARE_H
+#error You must include hardware.h not SA-1101.h
+#endif
+
+#ifndef SA1101_BASE
+#error You must define SA-1101 physical base address
+#endif
+
+#ifndef LANGUAGE
+# ifdef __ASSEMBLY__
+#  define LANGUAGE Assembly
+# else
+#  define LANGUAGE C
+# endif
+#endif
+
+/*
+ * We have mapped the sa1101 depending on the value of SA1101_BASE.
+ * It then appears from 0xf4000000.
+ */
+
+#define SA1101_p2v( x )         ((x) - SA1101_BASE + 0xf4000000)
+#define SA1101_v2p( x )         ((x) - 0xf4000000  + SA1101_BASE)
+
+#ifndef SA1101_p2v
+#define SA1101_p2v(PhAdd)  (PhAdd)
+#endif
+
+#include <mach/bitfield.h>
+
+#define C               0
+#define Assembly        1
+
+
+/*
+ * Memory map
+ */
+
+#define __SHMEM_CONTROL0	0x00000000
+#define __SYSTEM_CONTROL1	0x00000400
+#define __ARBITER		0x00020000
+#define __SYSTEM_CONTROL2	0x00040000
+#define __SYSTEM_CONTROL3	0x00060000
+#define __PARALLEL_PORT		0x00080000
+#define __VIDMEM_CONTROL	0x00100000
+#define __UPDATE_FIFO		0x00120000
+#define __SHMEM_CONTROL1	0x00140000
+#define __INTERRUPT_CONTROL	0x00160000
+#define __USB_CONTROL		0x00180000
+#define __TRACK_INTERFACE	0x001a0000
+#define __MOUSE_INTERFACE	0x001b0000
+#define __KEYPAD_INTERFACE	0x001c0000
+#define __PCMCIA_INTERFACE	0x001e0000
+#define	__VGA_CONTROL		0x00200000
+#define __GPIO_INTERFACE	0x00300000
+
+/*
+ * Macro that calculates real address for registers in the SA-1101
+ */
+
+#define _SA1101( x )    ((x) + SA1101_BASE)
+
+/*
+ * Interface and shared memory controller registers
+ *
+ * Registers
+ *	SKCR		SA-1101 control register (read/write)
+ *	SMCR		Shared Memory Controller Register
+ *	SNPR		Snoop Register
+ */
+
+#define _SKCR		_SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
+#define _SMCR		_SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
+#define _SNPR		_SA1101( 0x00140400 ) /* Snoop Reg. */
+
+#if LANGUAGE == C
+#define SKCR		(*((volatile Word *) SA1101_p2v (_SKCR)))
+#define SMCR		(*((volatile Word *) SA1101_p2v (_SMCR)))
+#define SNPR		(*((volatile Word *) SA1101_p2v (_SNPR)))
+
+#define SKCR_PLLEn	  0x0001	  /* Enable On-Chip PLL */
+#define SKCR_BCLKEn	  0x0002	  /* Enables BCLK */
+#define SKCR_Sleep	  0x0004	  /* Sleep Mode */
+#define SKCR_IRefEn	  0x0008	  /* DAC Iref input enable */
+#define SKCR_VCOON	  0x0010	  /* VCO bias */
+#define SKCR_ScanTestEn	  0x0020	  /* Enables scan test */
+#define SKCR_ClockTestEn  0x0040	  /* Enables clock test */
+
+#define SMCR_DCAC	  Fld(2,0)	  /* Number of column address bits */
+#define SMCR_DRAC	  Fld(2,2)	  /* Number of row address bits */
+#define SMCR_ArbiterBias  0x0008	  /* favor video or USB */
+#define SMCR_TopVidMem	  Fld(4,5)	  /* Top 4 bits of vidmem addr. */
+
+#define SMCR_ColAdrBits( x )		  /* col. addr bits 8..11 */ \
+	(( (x) - 8 ) << FShft (SMCR_DCAC))
+#define SMCR_RowAdrBits( x )		  /* row addr bits 9..12 */\
+	(( (x) - 9 ) << FShft (SMCR_DRAC))
+
+#define SNPR_VFBstart	  Fld(12,0)	/* Video frame buffer addr */
+#define SNPR_VFBsize	  Fld(11,12)	/* Video frame buffer size */
+#define SNPR_WholeBank	  (1 << 23)	/* Whole bank bit */
+#define SNPR_BankSelect	  Fld(2,27)	/* Bank select */
+#define SNPR_SnoopEn	  (1 << 31)	/* Enable snoop operation */
+
+#define SNPR_Set_VFBsize( x )   /* set frame buffer size (in kb) */ \
+	( (x) << FShft (SNPR_VFBsize))
+#define SNPR_Select_Bank(x)     /* select bank 0 or 1 */  \
+	(( (x) + 1 ) << FShft (SNPR_BankSelect ))
+
+#endif /* LANGUAGE == C */
+
+/*
+ * Video Memory Controller
+ *
+ * Registers
+ *    VMCCR	Configuration register
+ *    VMCAR	VMC address register
+ *    VMCDR	VMC data register
+ *
+ */
+
+#define _VMCCR		_SA1101( 0x00100000 )	/* Configuration register */
+#define _VMCAR		_SA1101( 0x00101000 )	/* VMC address register */
+#define _VMCDR		_SA1101( 0x00101400 )	/* VMC data register */
+
+#if LANGUAGE == C
+#define VMCCR		(*((volatile Word *) SA1101_p2v (_VMCCR)))
+#define VMCAR		(*((volatile Word *) SA1101_p2v (_VMCAR)))
+#define VMCDR		(*((volatile Word *) SA1101_p2v (_VMCDR)))
+
+#define VMCCR_RefreshEn	    0x0000	  /* Enable memory refresh */
+#define VMCCR_Config	    0x0001	  /* DRAM size */
+#define VMCCR_RefPeriod	    Fld(2,3)	  /* Refresh period */
+#define VMCCR_StaleDataWait Fld(4,5)	  /* Stale FIFO data timeout counter */
+#define VMCCR_SleepState    (1<<9)	  /* State of interface pins in sleep*/
+#define VMCCR_RefTest	    (1<<10)	  /* refresh test */
+#define VMCCR_RefLow	    Fld(6,11)	  /* refresh low counter */
+#define VMCCR_RefHigh	    Fld(7,17)	  /* refresh high counter */
+#define VMCCR_SDTCTest	    Fld(7,24)	  /* stale data timeout counter */
+#define VMCCR_ForceSelfRef  (1<<31)	  /* Force self refresh */
+
+#endif LANGUAGE == C
+
+
+/* Update FIFO
+ *
+ * Registers
+ *    UFCR	Update FIFO Control Register
+ *    UFSR	Update FIFO Status Register
+ *    UFLVLR	update FIFO level register
+ *    UFDR	update FIFO data register
+ */
+
+#define _UFCR	_SA1101(0x00120000)   /* Update FIFO Control Reg. */
+#define _UFSR	_SA1101(0x00120400)   /* Update FIFO Status Reg. */	
+#define _UFLVLR	_SA1101(0x00120800)   /* Update FIFO level reg. */
+#define _UFDR	_SA1101(0x00120c00)   /* Update FIFO data reg. */
+
+#if LANGUAGE == C
+
+#define UFCR 	(*((volatile Word *) SA1101_p2v (_UFCR)))
+#define UFSR	(*((volatile Word *) SA1101_p2v (_UFSR)))
+#define UFLVLR	(*((volatile Word *) SA1101_p2v (_UFLVLR))) 
+#define UFDR	(*((volatile Word *) SA1101_p2v (_UFDR)))
+
+
+#define UFCR_FifoThreshhold	Fld(7,0)	/* Level for FifoGTn flag */
+
+#define UFSR_FifoGTnFlag	0x01		/* FifoGTn flag */#define UFSR_FifoEmpty		0x80		/* FIFO is empty */
+
+#endif /* LANGUAGE == C */
+
+/* System Controller
+ *
+ * Registers
+ *    SKPCR	Power Control Register
+ *    SKCDR	Clock Divider Register
+ *    DACDR1	DAC1 Data register
+ *    DACDR2	DAC2 Data register
+ */
+
+#define _SKPCR		_SA1101(0x00000400)
+#define _SKCDR		_SA1101(0x00040000)
+#define _DACDR1		_SA1101(0x00060000)
+#define _DACDR2		_SA1101(0x00060400)
+
+#if LANGUAGE == C
+#define SKPCR 	(*((volatile Word *) SA1101_p2v (_SKPCR)))
+#define SKCDR	(*((volatile Word *) SA1101_p2v (_SKCDR)))
+#define DACDR1	(*((volatile Word *) SA1101_p2v (_DACDR1)))
+#define DACDR2	(*((volatile Word *) SA1101_p2v (_DACDR2)))
+
+#define SKPCR_UCLKEn	     0x01    /* USB Enable */
+#define SKPCR_PCLKEn	     0x02    /* PS/2 Enable */
+#define SKPCR_ICLKEn	     0x04    /* Interrupt Controller Enable */
+#define SKPCR_VCLKEn	     0x08    /* Video Controller Enable */
+#define SKPCR_PICLKEn	     0x10    /* parallel port Enable */
+#define SKPCR_DCLKEn	     0x20    /* DACs Enable */
+#define SKPCR_nKPADEn	     0x40    /* Multiplexer */
+
+#define SKCDR_PLLMul	     Fld(7,0)	/* PLL Multiplier */
+#define SKCDR_VCLKEn	     Fld(2,7)	/* Video controller clock divider */
+#define SKDCR_BCLKEn	     (1<<9)	/* BCLK Divider */
+#define SKDCR_UTESTCLKEn     (1<<10)	/* Route USB clock during test mode */
+#define SKDCR_DivRValue	     Fld(6,11)	/* Input clock divider for PLL */
+#define SKDCR_DivNValue	     Fld(5,17)	/* Output clock divider for PLL */
+#define SKDCR_PLLRSH	     Fld(3,22)	/* PLL bandwidth control */
+#define SKDCR_ChargePump     (1<<25)	/* Charge pump control */
+#define SKDCR_ClkTestMode    (1<<26)	/* Clock output test mode */
+#define SKDCR_ClkTestEn	     (1<<27)	/* Test clock generator */
+#define SKDCR_ClkJitterCntl  Fld(3,28)	/* video clock jitter compensation */
+
+#define DACDR_DACCount	     Fld(8,0)	/* Count value */
+#define DACDR1_DACCount	     DACDR_DACCount
+#define DACDR2_DACCount	     DACDR_DACCount
+
+#endif /* LANGUAGE == C */
+
+/*
+ * Parallel Port Interface
+ *
+ * Registers
+ *    IEEE_Config	IEEE mode selection and programmable attributes
+ *    IEEE_Control	Controls the states of IEEE port control outputs
+ *    IEEE_Data		Forward transfer data register
+ *    IEEE_Addr		Forward transfer address register
+ *    IEEE_Status	Port IO signal status register
+ *    IEEE_IntStatus	Port interrupts status register
+ *    IEEE_FifoLevels   Rx and Tx FIFO interrupt generation levels
+ *    IEEE_InitTime	Forward timeout counter initial value
+ *    IEEE_TimerStatus	Forward timeout counter current value
+ *    IEEE_FifoReset	Reset forward transfer FIFO
+ *    IEEE_ReloadValue	Counter reload value
+ *    IEEE_TestControl	Control testmode
+ *    IEEE_TestDataIn	Test data register
+ *    IEEE_TestDataInEn	Enable test data
+ *    IEEE_TestCtrlIn	Test control signals
+ *    IEEE_TestCtrlInEn	Enable test control signals
+ *    IEEE_TestDataStat	Current data bus value
+ *
+ */
+
+/*
+ * The control registers are defined as offsets from a base address 
+ */
+ 
+#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
+
+#define _IEEE_Config	    _IEEE( 0x0000 )
+#define _IEEE_Control	    _IEEE( 0x0400 )
+#define _IEEE_Data	    _IEEE( 0x4000 )
+#define _IEEE_Addr	    _IEEE( 0x0800 )
+#define _IEEE_Status	    _IEEE( 0x0c00 )
+#define _IEEE_IntStatus	    _IEEE( 0x1000 )
+#define _IEEE_FifoLevels    _IEEE( 0x1400 )
+#define _IEEE_InitTime	    _IEEE( 0x1800 )
+#define _IEEE_TimerStatus   _IEEE( 0x1c00 )
+#define _IEEE_FifoReset	    _IEEE( 0x2000 )
+#define _IEEE_ReloadValue   _IEEE( 0x3c00 )
+#define _IEEE_TestControl   _IEEE( 0x2400 )
+#define _IEEE_TestDataIn    _IEEE( 0x2800 )
+#define _IEEE_TestDataInEn  _IEEE( 0x2c00 )
+#define _IEEE_TestCtrlIn    _IEEE( 0x3000 )
+#define _IEEE_TestCtrlInEn  _IEEE( 0x3400 )
+#define _IEEE_TestDataStat  _IEEE( 0x3800 )
+ 
+
+#if LANGUAGE == C
+#define IEEE_Config	    (*((volatile Word *) SA1101_p2v (_IEEE_Config)))
+#define IEEE_Control	    (*((volatile Word *) SA1101_p2v (_IEEE_Control)))
+#define IEEE_Data	    (*((volatile Word *) SA1101_p2v (_IEEE_Data)))
+#define IEEE_Addr	    (*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
+#define IEEE_Status	    (*((volatile Word *) SA1101_p2v (_IEEE_Status)))
+#define IEEE_IntStatus	    (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus)))
+#define IEEE_FifoLevels	    (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels)))
+#define IEEE_InitTime	    (*((volatile Word *) SA1101_p2v (_IEEE_InitTime)))
+#define IEEE_TimerStatus    (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus)))
+#define IEEE_FifoReset	    (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset)))
+#define IEEE_ReloadValue    (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue)))
+#define IEEE_TestControl    (*((volatile Word *) SA1101_p2v (_IEEE_TestControl)))
+#define IEEE_TestDataIn     (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn)))
+#define IEEE_TestDataInEn   (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn)))
+#define IEEE_TestCtrlIn     (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn)))
+#define IEEE_TestCtrlInEn   (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn)))
+#define IEEE_TestDataStat   (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat)))
+
+
+#define IEEE_Config_M	    Fld(3,0)	 /* Mode select */
+#define IEEE_Config_D	    0x04	 /* FIFO access enable */
+#define IEEE_Config_B	    0x08	 /* 9-bit word enable */
+#define IEEE_Config_T	    0x10	 /* Data transfer enable */
+#define IEEE_Config_A	    0x20	 /* Data transfer direction */
+#define IEEE_Config_E	    0x40	 /* Timer enable */
+#define IEEE_Control_A	    0x08	 /* AutoFd output */
+#define IEEE_Control_E	    0x04	 /* Selectin output */
+#define IEEE_Control_T	    0x02	 /* Strobe output */
+#define IEEE_Control_I	    0x01	 /* Port init output */
+#define IEEE_Data_C	    (1<<31)	 /* Byte count */
+#define IEEE_Data_Db	    Fld(9,16)	 /* Data byte 2 */
+#define IEEE_Data_Da	    Fld(9,0)	 /* Data byte 1 */
+#define IEEE_Addr_A	    Fld(8,0)	 /* forward address transfer byte */
+#define IEEE_Status_A	    0x0100	 /* nAutoFd port output status */
+#define IEEE_Status_E	    0x0080	 /* nSelectIn port output status */
+#define IEEE_Status_T	    0x0040	 /* nStrobe port output status */
+#define IEEE_Status_I	    0x0020	 /* nInit port output status */
+#define IEEE_Status_B	    0x0010	 /* Busy port inout status */
+#define IEEE_Status_S	    0x0008	 /* Select port input status */
+#define IEEE_Status_K	    0x0004	 /* nAck port input status */
+#define IEEE_Status_F	    0x0002	 /* nFault port input status */
+#define IEEE_Status_R	    0x0001	 /* pError port input status */
+
+#define IEEE_IntStatus_IntReqDat	 0x0100
+#define IEEE_IntStatus_IntReqEmp	 0x0080
+#define IEEE_IntStatus_IntReqInt	 0x0040
+#define IEEE_IntStatus_IntReqRav	 0x0020
+#define IEEE_IntStatus_IntReqTim	 0x0010
+#define IEEE_IntStatus_RevAddrComp	 0x0008
+#define IEEE_IntStatus_RevDataComp	 0x0004
+#define IEEE_IntStatus_FwdAddrComp	 0x0002
+#define IEEE_IntStatus_FwdDataComp	 0x0001
+#define IEEE_FifoLevels_RevFifoLevel	 2
+#define IEEE_FifoLevels_FwdFifoLevel	 1
+#define IEEE_InitTime_TimValInit	 Fld(22,0)
+#define IEEE_TimerStatus_TimValStat	 Fld(22,0)
+#define IEEE_ReloadValue_Reload		 Fld(4,0)
+
+#define IEEE_TestControl_RegClk		 0x04
+#define IEEE_TestControl_ClockSelect	 Fld(2,1)
+#define IEEE_TestControl_TimerTestModeEn 0x01
+#define IEEE_TestCtrlIn_PError		 0x10
+#define IEEE_TestCtrlIn_nFault		 0x08
+#define IEEE_TestCtrlIn_nAck		 0x04
+#define IEEE_TestCtrlIn_PSel		 0x02
+#define IEEE_TestCtrlIn_Busy		 0x01
+
+#endif /* LANGUAGE == C */
+
+/*
+ * VGA Controller
+ *
+ * Registers
+ *    VideoControl	Video Control Register
+ *    VgaTiming0	VGA Timing Register 0
+ *    VgaTiming1	VGA Timing Register 1
+ *    VgaTiming2	VGA Timing Register 2
+ *    VgaTiming3	VGA Timing Register 3
+ *    VgaBorder		VGA Border Color Register
+ *    VgaDBAR		VGADMA Base Address Register
+ *    VgaDCAR		VGADMA Channel Current Address Register
+ *    VgaStatus		VGA Status Register
+ *    VgaInterruptMask	VGA Interrupt Mask Register
+ *    VgaPalette	VGA Palette Registers
+ *    DacControl	DAC Control Register
+ *    VgaTest		VGA Controller Test Register
+ */
+
+#define _VGA( x )	_SA1101( ( x ) + __VGA_CONTROL )
+
+#define _VideoControl	    _VGA( 0x0000 )
+#define _VgaTiming0	    _VGA( 0x0400 )
+#define _VgaTiming1	    _VGA( 0x0800 )
+#define _VgaTiming2	    _VGA( 0x0c00 )
+#define _VgaTiming3	    _VGA( 0x1000 )
+#define _VgaBorder	    _VGA( 0x1400 )
+#define _VgaDBAR	    _VGA( 0x1800 )
+#define _VgaDCAR	    _VGA( 0x1c00 )
+#define _VgaStatus	    _VGA( 0x2000 )
+#define _VgaInterruptMask   _VGA( 0x2400 )
+#define _VgaPalette	    _VGA( 0x40000 )
+#define _DacControl	    _VGA( 0x3000 )
+#define _VgaTest	    _VGA( 0x2c00 )
+
+#if (LANGUAGE == C)
+#define VideoControl   (*((volatile Word *) SA1101_p2v (_VideoControl)))
+#define VgaTiming0     (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
+#define VgaTiming1     (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
+#define VgaTiming2     (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
+#define VgaTiming3     (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
+#define VgaBorder      (*((volatile Word *) SA1101_p2v (_VgaBorder)))
+#define VgaDBAR	       (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
+#define VgaDCAR	       (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
+#define VgaStatus      (*((volatile Word *) SA1101_p2v (_VgaStatus)))
+#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask)))
+#define VgaPalette     (*((volatile Word *) SA1101_p2v (_VgaPalette)))
+#define DacControl     (*((volatile Word *) SA1101_p2v (_DacControl)))
+#define VgaTest        (*((volatile Word *) SA1101_p2v (_VgaTest)))
+
+#define VideoControl_VgaEn    0x00000000
+#define VideoControl_BGR      0x00000001
+#define VideoControl_VCompVal Fld(2,2)
+#define VideoControl_VgaReq   Fld(4,4)
+#define VideoControl_VBurstL  Fld(4,8)
+#define VideoControl_VMode    (1<<12)
+#define VideoControl_PalRead  (1<<13)
+
+#define VgaTiming0_PPL	      Fld(6,2)
+#define VgaTiming0_HSW	      Fld(8,8)
+#define VgaTiming0_HFP	      Fld(8,16)
+#define VgaTiming0_HBP	      Fld(8,24)
+
+#define VgaTiming1_LPS	      Fld(10,0)
+#define VgaTiming1_VSW	      Fld(6,10)
+#define VgaTiming1_VFP	      Fld(8,16)
+#define VgaTiming1_VBP	      Fld(8,24)
+
+#define VgaTiming2_IVS	      0x01
+#define VgaTiming2_IHS	      0x02
+#define VgaTiming2_CVS	      0x04
+#define VgaTiming2_CHS	      0x08
+
+#define VgaTiming3_HBS	      Fld(8,0)
+#define VgaTiming3_HBE	      Fld(8,8)
+#define VgaTiming3_VBS	      Fld(8,16)
+#define VgaTiming3_VBE	      Fld(8,24)
+
+#define VgaBorder_BCOL	      Fld(24,0)
+
+#define VgaStatus_VFUF	      0x01
+#define VgaStatus_VNext	      0x02
+#define VgaStatus_VComp	      0x04
+
+#define VgaInterruptMask_VFUFMask   0x00
+#define VgaInterruptMask_VNextMask  0x01
+#define VgaInterruptMask_VCompMask  0x02
+
+#define VgaPalette_R	      Fld(8,0)
+#define VgaPalette_G	      Fld(8,8)
+#define VgaPalette_B	      Fld(8,16)
+
+#define DacControl_DACON      0x0001
+#define DacControl_COMPON     0x0002
+#define DacControl_PEDON      0x0004
+#define DacControl_RTrim      Fld(5,4)
+#define DacControl_GTrim      Fld(5,9)
+#define DacControl_BTrim      Fld(5,14)
+
+#define VgaTest_TDAC	      0x00
+#define VgaTest_Datatest      Fld(4,1)
+#define VgaTest_DACTESTDAC    0x10
+#define VgaTest_DACTESTOUT    Fld(3,5)
+
+#endif /* LANGUAGE == C */
+
+/*
+ * USB Host Interface Controller
+ *
+ * Registers
+ *    Revision
+ *    Control
+ *    CommandStatus
+ *    InterruptStatus
+ *    InterruptEnable
+ *    HCCA
+ *    PeriodCurrentED
+ *    ControlHeadED
+ *    BulkHeadED
+ *    BulkCurrentED
+ *    DoneHead
+ *    FmInterval
+ *    FmRemaining
+ *    FmNumber
+ *    PeriodicStart
+ *    LSThreshold
+ *    RhDescriptorA
+ *    RhDescriptorB
+ *    RhStatus
+ *    RhPortStatus
+ *    USBStatus
+ *    USBReset
+ *    USTAR
+ *    USWER
+ *    USRFR
+ *    USNFR
+ *    USTCSR
+ *    USSR
+ *    
+ */
+
+#define _USB( x )	_SA1101( ( x ) + __USB_CONTROL )
+
+
+#define _Revision	  _USB( 0x0000 )
+#define _Control	  _USB( 0x0888 )
+#define _CommandStatus	  _USB( 0x0c00 )
+#define _InterruptStatus  _USB( 0x1000 )
+#define _InterruptEnable  _USB( 0x1400 )
+#define _HCCA		  _USB( 0x1800 )
+#define _PeriodCurrentED  _USB( 0x1c00 )
+#define _ControlHeadED	  _USB( 0x2000 )
+#define _BulkHeadED	  _USB( 0x2800 )
+#define _BulkCurrentED	  _USB( 0x2c00 )
+#define _DoneHead	  _USB( 0x3000 )
+#define _FmInterval	  _USB( 0x3400 )
+#define _FmRemaining	  _USB( 0x3800 )
+#define _FmNumber	  _USB( 0x3c00 )
+#define _PeriodicStart	  _USB( 0x4000 )
+#define _LSThreshold	  _USB( 0x4400 )
+#define _RhDescriptorA	  _USB( 0x4800 )
+#define _RhDescriptorB	  _USB( 0x4c00 )
+#define _RhStatus	  _USB( 0x5000 )
+#define _RhPortStatus	  _USB( 0x5400 )
+#define _USBStatus	  _USB( 0x11800 )
+#define _USBReset	  _USB( 0x11c00 )
+
+#define _USTAR		  _USB( 0x10400 )
+#define _USWER		  _USB( 0x10800 )
+#define _USRFR		  _USB( 0x10c00 )
+#define _USNFR		  _USB( 0x11000 )
+#define _USTCSR		  _USB( 0x11400 )
+#define _USSR		  _USB( 0x11800 )
+
+
+#if (LANGUAGE == C)
+
+#define Revision	(*((volatile Word *) SA1101_p2v (_Revision)))
+#define Control		(*((volatile Word *) SA1101_p2v (_Control)))
+#define CommandStatus	(*((volatile Word *) SA1101_p2v (_CommandStatus)))
+#define InterruptStatus	(*((volatile Word *) SA1101_p2v (_InterruptStatus)))
+#define InterruptEnable	(*((volatile Word *) SA1101_p2v (_InterruptEnable)))
+#define HCCA		(*((volatile Word *) SA1101_p2v (_HCCA)))
+#define PeriodCurrentED	(*((volatile Word *) SA1101_p2v (_PeriodCurrentED)))
+#define ControlHeadED	(*((volatile Word *) SA1101_p2v (_ControlHeadED)))
+#define BulkHeadED	(*((volatile Word *) SA1101_p2v (_BulkHeadED)))
+#define BulkCurrentED	(*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
+#define DoneHead	(*((volatile Word *) SA1101_p2v (_DoneHead)))
+#define FmInterval	(*((volatile Word *) SA1101_p2v (_FmInterval)))
+#define FmRemaining	(*((volatile Word *) SA1101_p2v (_FmRemaining)))
+#define FmNumber	(*((volatile Word *) SA1101_p2v (_FmNumber)))
+#define PeriodicStart	(*((volatile Word *) SA1101_p2v (_PeriodicStart)))
+#define LSThreshold	(*((volatile Word *) SA1101_p2v (_LSThreshold)))
+#define RhDescriptorA	(*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
+#define RhDescriptorB	(*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
+#define RhStatus	(*((volatile Word *) SA1101_p2v (_RhStatus)))
+#define RhPortStatus	(*((volatile Word *) SA1101_p2v (_RhPortStatus)))
+#define USBStatus	(*((volatile Word *) SA1101_p2v (_USBStatus)))
+#define USBReset	(*((volatile Word *) SA1101_p2v (_USBReset)))
+#define USTAR		(*((volatile Word *) SA1101_p2v (_USTAR)))
+#define USWER		(*((volatile Word *) SA1101_p2v (_USWER)))
+#define USRFR		(*((volatile Word *) SA1101_p2v (_USRFR)))
+#define USNFR		(*((volatile Word *) SA1101_p2v (_USNFR)))
+#define USTCSR		(*((volatile Word *) SA1101_p2v (_USTCSR)))
+#define USSR		(*((volatile Word *) SA1101_p2v (_USSR)))
+
+
+#define USBStatus_IrqHciRmtWkp	     (1<<7)
+#define USBStatus_IrqHciBuffAcc	     (1<<8)
+#define USBStatus_nIrqHciM	     (1<<9)
+#define USBStatus_nHciMFClr	     (1<<10)
+
+#define USBReset_ForceIfReset	     0x01
+#define USBReset_ForceHcReset	     0x02
+#define USBReset_ClkGenReset	     0x04
+
+#define USTCR_RdBstCntrl	     Fld(3,0)
+#define USTCR_ByteEnable	     Fld(4,3)
+#define USTCR_WriteEn		     (1<<7)
+#define USTCR_FifoCir		     (1<<8)
+#define USTCR_TestXferSel	     (1<<9)
+#define USTCR_FifoCirAtEnd	     (1<<10)
+#define USTCR_nSimScaleDownClk	     (1<<11)
+
+#define USSR_nAppMDEmpty	     0x01
+#define USSR_nAppMDFirst	     0x02
+#define USSR_nAppMDLast		     0x04
+#define USSR_nAppMDFull		     0x08
+#define USSR_nAppMAFull		     0x10
+#define USSR_XferReq		     0x20
+#define USSR_XferEnd		     0x40
+
+#endif /* LANGUAGE == C */
+
+
+/*
+ * Interrupt Controller
+ *
+ * Registers
+ *    INTTEST0		Test register 0
+ *    INTTEST1		Test register 1
+ *    INTENABLE0	Interrupt Enable register 0
+ *    INTENABLE1	Interrupt Enable register 1
+ *    INTPOL0		Interrupt Polarity selection 0
+ *    INTPOL1		Interrupt Polarity selection 1
+ *    INTTSTSEL		Interrupt source selection
+ *    INTSTATCLR0	Interrupt Status 0
+ *    INTSTATCLR1	Interrupt Status 1
+ *    INTSET0		Interrupt Set 0
+ *    INTSET1		Interrupt Set 1
+ */
+
+#define _INT( x )	_SA1101( ( x ) + __INTERRUPT_CONTROL)
+
+#define _INTTEST0	_INT( 0x1000 )
+#define _INTTEST1	_INT( 0x1400 )
+#define _INTENABLE0	_INT( 0x2000 )
+#define _INTENABLE1	_INT( 0x2400 )
+#define _INTPOL0	_INT( 0x3000 )
+#define _INTPOL1	_INT( 0x3400 )
+#define _INTTSTSEL     	_INT( 0x5000 )
+#define _INTSTATCLR0	_INT( 0x6000 )
+#define _INTSTATCLR1	_INT( 0x6400 )
+#define _INTSET0	_INT( 0x7000 )
+#define _INTSET1	_INT( 0x7400 )
+
+#if ( LANGUAGE == C )
+#define INTTEST0	(*((volatile Word *) SA1101_p2v (_INTTEST0)))
+#define INTTEST1	(*((volatile Word *) SA1101_p2v (_INTTEST1)))
+#define INTENABLE0	(*((volatile Word *) SA1101_p2v (_INTENABLE0)))
+#define INTENABLE1	(*((volatile Word *) SA1101_p2v (_INTENABLE1)))
+#define INTPOL0		(*((volatile Word *) SA1101_p2v (_INTPOL0)))
+#define INTPOL1		(*((volatile Word *) SA1101_p2v (_INTPOL1)))
+#define INTTSTSEL	(*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
+#define INTSTATCLR0	(*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
+#define INTSTATCLR1	(*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
+#define INTSET0		(*((volatile Word *) SA1101_p2v (_INTSET0)))
+#define INTSET1		(*((volatile Word *) SA1101_p2v (_INTSET1)))
+
+#endif /* LANGUAGE == C */
+
+/*
+ * PS/2 Trackpad and Mouse Interfaces
+ *
+ * Registers   (prefix kbd applies to trackpad interface, mse to mouse)
+ *    KBDCR		Control Register
+ *    KBDSTAT		Status Register
+ *    KBDDATA		Transmit/Receive Data register
+ *    KBDCLKDIV		Clock Division Register
+ *    KBDPRECNT		Clock Precount Register
+ *    KBDTEST1		Test register 1
+ *    KBDTEST2		Test register 2
+ *    KBDTEST3		Test register 3
+ *    KBDTEST4		Test register 4
+ *    MSECR	
+ *    MSESTAT
+ *    MSEDATA
+ *    MSECLKDIV
+ *    MSEPRECNT
+ *    MSETEST1
+ *    MSETEST2
+ *    MSETEST3
+ *    MSETEST4
+ *     
+ */
+
+#define _KBD( x )	_SA1101( ( x ) + __TRACK_INTERFACE )
+#define _MSE( x )	_SA1101( ( x ) + __MOUSE_INTERFACE )
+
+#define _KBDCR		_KBD( 0x0000 )
+#define _KBDSTAT	_KBD( 0x0400 )
+#define _KBDDATA	_KBD( 0x0800 )
+#define _KBDCLKDIV	_KBD( 0x0c00 )
+#define _KBDPRECNT	_KBD( 0x1000 )
+#define	_KBDTEST1	_KBD( 0x2000 )
+#define _KBDTEST2	_KBD( 0x2400 )
+#define _KBDTEST3	_KBD( 0x2800 )
+#define _KBDTEST4	_KBD( 0x2c00 )
+#define _MSECR		_MSE( 0x0000 )
+#define _MSESTAT	_MSE( 0x0400 )
+#define _MSEDATA	_MSE( 0x0800 )
+#define _MSECLKDIV	_MSE( 0x0c00 )
+#define _MSEPRECNT	_MSE( 0x1000 )
+#define	_MSETEST1	_MSE( 0x2000 )
+#define _MSETEST2	_MSE( 0x2400 )
+#define _MSETEST3	_MSE( 0x2800 )
+#define _MSETEST4	_MSE( 0x2c00 )
+
+#if ( LANGUAGE == C )
+
+#define KBDCR	    (*((volatile Word *) SA1101_p2v (_KBDCR)))
+#define KBDSTAT	    (*((volatile Word *) SA1101_p2v (_KBDSTAT)))
+#define KBDDATA	    (*((volatile Word *) SA1101_p2v (_KBDDATA)))
+#define KBDCLKDIV   (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
+#define KBDPRECNT   (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
+#define KBDTEST1    (*((volatile Word *) SA1101_p2v (_KBDTEST1)))
+#define KBDTEST2    (*((volatile Word *) SA1101_p2v (_KBDTEST2)))
+#define KBDTEST3    (*((volatile Word *) SA1101_p2v (_KBDTEST3)))
+#define KBDTEST4    (*((volatile Word *) SA1101_p2v (_KBDTEST4)))
+#define MSECR	    (*((volatile Word *) SA1101_p2v (_MSECR)))
+#define MSESTAT	    (*((volatile Word *) SA1101_p2v (_MSESTAT)))
+#define MSEDATA	    (*((volatile Word *) SA1101_p2v (_MSEDATA)))
+#define MSECLKDIV   (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
+#define MSEPRECNT   (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
+#define MSETEST1    (*((volatile Word *) SA1101_p2v (_MSETEST1)))
+#define MSETEST2    (*((volatile Word *) SA1101_p2v (_MSETEST2)))
+#define MSETEST3    (*((volatile Word *) SA1101_p2v (_MSETEST3)))
+#define MSETEST4    (*((volatile Word *) SA1101_p2v (_MSETEST4)))
+
+
+#define KBDCR_ENA		 0x08
+#define KBDCR_FKD		 0x02
+#define KBDCR_FKC		 0x01
+
+#define KBDSTAT_TXE		 0x80
+#define KBDSTAT_TXB		 0x40
+#define KBDSTAT_RXF		 0x20
+#define KBDSTAT_RXB		 0x10
+#define KBDSTAT_ENA		 0x08
+#define KBDSTAT_RXP		 0x04
+#define KBDSTAT_KBD		 0x02
+#define KBDSTAT_KBC		 0x01
+
+#define KBDCLKDIV_DivVal	 Fld(4,0)
+
+#define MSECR_ENA		 0x08
+#define MSECR_FKD		 0x02
+#define MSECR_FKC		 0x01
+
+#define MSESTAT_TXE		 0x80
+#define MSESTAT_TXB		 0x40
+#define MSESTAT_RXF		 0x20
+#define MSESTAT_RXB		 0x10
+#define MSESTAT_ENA		 0x08
+#define MSESTAT_RXP		 0x04	
+#define MSESTAT_MSD		 0x02
+#define MSESTAT_MSC		 0x01
+
+#define MSECLKDIV_DivVal	 Fld(4,0)
+
+#define KBDTEST1_CD		 0x80
+#define KBDTEST1_RC1		 0x40
+#define KBDTEST1_MC		 0x20
+#define KBDTEST1_C		 Fld(2,3)
+#define KBDTEST1_T2		 0x40
+#define KBDTEST1_T1		 0x20
+#define KBDTEST1_T0		 0x10
+#define KBDTEST2_TICBnRES	 0x08
+#define KBDTEST2_RKC		 0x04
+#define KBDTEST2_RKD		 0x02
+#define KBDTEST2_SEL		 0x01
+#define KBDTEST3_ms_16		 0x80
+#define KBDTEST3_us_64		 0x40
+#define KBDTEST3_us_16		 0x20
+#define KBDTEST3_DIV8		 0x10
+#define KBDTEST3_DIn		 0x08
+#define KBDTEST3_CIn		 0x04
+#define KBDTEST3_KD		 0x02
+#define KBDTEST3_KC		 0x01
+#define KBDTEST4_BC12		 0x80
+#define KBDTEST4_BC11		 0x40
+#define KBDTEST4_TRES		 0x20
+#define KBDTEST4_CLKOE		 0x10
+#define KBDTEST4_CRES		 0x08
+#define KBDTEST4_RXB		 0x04
+#define KBDTEST4_TXB		 0x02
+#define KBDTEST4_SRX		 0x01
+
+#define MSETEST1_CD		 0x80
+#define MSETEST1_RC1		 0x40
+#define MSETEST1_MC		 0x20
+#define MSETEST1_C		 Fld(2,3)
+#define MSETEST1_T2		 0x40
+#define MSETEST1_T1		 0x20
+#define MSETEST1_T0		 0x10
+#define MSETEST2_TICBnRES	 0x08
+#define MSETEST2_RKC		 0x04
+#define MSETEST2_RKD		 0x02
+#define MSETEST2_SEL		 0x01
+#define MSETEST3_ms_16		 0x80
+#define MSETEST3_us_64		 0x40
+#define MSETEST3_us_16		 0x20
+#define MSETEST3_DIV8		 0x10
+#define MSETEST3_DIn		 0x08
+#define MSETEST3_CIn		 0x04
+#define MSETEST3_KD		 0x02
+#define MSETEST3_KC		 0x01
+#define MSETEST4_BC12		 0x80
+#define MSETEST4_BC11		 0x40
+#define MSETEST4_TRES		 0x20
+#define MSETEST4_CLKOE		 0x10
+#define MSETEST4_CRES		 0x08
+#define MSETEST4_RXB		 0x04
+#define MSETEST4_TXB		 0x02
+#define MSETEST4_SRX		 0x01
+
+#endif  /* LANGUAGE == C */
+
+
+/*
+ * General-Purpose I/O Interface
+ *
+ * Registers
+ *    PADWR	Port A Data Write Register
+ *    PBDWR	Port B Data Write Register
+ *    PADRR	Port A Data Read Register
+ *    PBDRR	Port B Data Read Register
+ *    PADDR	Port A Data Direction Register
+ *    PBDDR	Port B Data Direction Register
+ *    PASSR	Port A Sleep State Register
+ *    PBSSR	Port B Sleep State Register
+ *
+ */
+
+#define _PIO( x )      _SA1101( ( x ) + __GPIO_INTERFACE )
+
+#define _PADWR	       _PIO( 0x0000 )
+#define _PBDWR	       _PIO( 0x0400 )
+#define _PADRR	       _PIO( 0x0000 )
+#define _PBDRR	       _PIO( 0x0400 )
+#define _PADDR	       _PIO( 0x0800 )
+#define _PBDDR	       _PIO( 0x0c00 )
+#define _PASSR	       _PIO( 0x1000 )
+#define _PBSSR	       _PIO( 0x1400 )
+
+
+#if ( LANGUAGE == C )
+
+
+#define PADWR	    (*((volatile Word *) SA1101_p2v (_PADWR)))
+#define PBDWR	    (*((volatile Word *) SA1101_p2v (_PBDWR)))
+#define PADRR	    (*((volatile Word *) SA1101_p2v (_PADRR)))
+#define PBDRR	    (*((volatile Word *) SA1101_p2v (_PBDRR)))
+#define PADDR	    (*((volatile Word *) SA1101_p2v (_PADDR)))
+#define PBDDR	    (*((volatile Word *) SA1101_p2v (_PBDDR)))
+#define PASSR	    (*((volatile Word *) SA1101_p2v (_PASSR)))
+#define PBSSR	    (*((volatile Word *) SA1101_p2v (_PBSSR)))
+
+#endif
+
+
+
+/*
+ * Keypad Interface
+ *
+ * Registers
+ *    PXDWR
+ *    PXDRR
+ *    PYDWR
+ *    PYDRR
+ *
+ */
+
+#define _KEYPAD( x )	_SA1101( ( x ) + __KEYPAD_INTERFACE ) 
+
+#define _PXDWR	   _KEYPAD( 0x0000 )
+#define _PXDRR	   _KEYPAD( 0x0000 )
+#define _PYDWR	   _KEYPAD( 0x0400 )
+#define _PYDRR	   _KEYPAD( 0x0400 )
+
+#if ( LANGUAGE == C )
+
+
+#define PXDWR	    (*((volatile Word *) SA1101_p2v (_PXDWR)))
+#define PXDRR	    (*((volatile Word *) SA1101_p2v (_PXDRR)))
+#define PYDWR	    (*((volatile Word *) SA1101_p2v (_PYDWR)))
+#define PYDRR	    (*((volatile Word *) SA1101_p2v (_PYDRR)))
+
+#endif
+
+
+
+/*
+ * PCMCIA Interface
+ *
+ * Registers
+ *    PCSR	Status Register
+ *    PCCR	Control Register
+ *    PCSSR	Sleep State Register
+ *
+ */
+
+#define _CARD( x )	_SA1101( ( x ) + __PCMCIA_INTERFACE )
+
+#define _PCSR	   _CARD( 0x0000 )
+#define _PCCR	   _CARD( 0x0400 )
+#define _PCSSR	   _CARD( 0x0800 )
+
+#if ( LANGUAGE == C )
+#define PCSR    (*((volatile Word *) SA1101_p2v (_PCSR)))
+#define PCCR	(*((volatile Word *) SA1101_p2v (_PCCR)))
+#define PCSSR	(*((volatile Word *) SA1101_p2v (_PCSSR)))
+
+#define PCSR_S0_ready		0x0001
+#define PCSR_S1_ready		0x0002
+#define PCSR_S0_detected	0x0004
+#define PCSR_S1_detected	0x0008
+#define PCSR_S0_VS1		0x0010
+#define PCSR_S0_VS2		0x0020
+#define PCSR_S1_VS1		0x0040
+#define PCSR_S1_VS2		0x0080
+#define PCSR_S0_WP		0x0100
+#define PCSR_S1_WP		0x0200
+#define PCSR_S0_BVD1_nSTSCHG	0x0400
+#define PCSR_S0_BVD2_nSPKR	0x0800
+#define PCSR_S1_BVD1_nSTSCHG	0x1000
+#define PCSR_S1_BVD2_nSPKR	0x2000
+
+#define PCCR_S0_VPP0		0x0001
+#define PCCR_S0_VPP1		0x0002
+#define PCCR_S0_VCC0		0x0004
+#define PCCR_S0_VCC1		0x0008
+#define PCCR_S1_VPP0		0x0010
+#define PCCR_S1_VPP1		0x0020
+#define PCCR_S1_VCC0		0x0040
+#define PCCR_S1_VCC1		0x0080
+#define PCCR_S0_reset		0x0100
+#define PCCR_S1_reset		0x0200
+#define PCCR_S0_float		0x0400
+#define PCCR_S1_float		0x0800
+
+#define PCSSR_S0_VCC0		0x0001
+#define PCSSR_S0_VCC1		0x0002
+#define PCSSR_S0_VPP0		0x0004
+#define PCSSR_S0_VPP1		0x0008
+#define PCSSR_S0_control	0x0010
+#define PCSSR_S1_VCC0		0x0020
+#define PCSSR_S1_VCC1		0x0040
+#define PCSSR_S1_VPP0		0x0080
+#define PCSSR_S1_VPP1		0x0100
+#define PCSSR_S1_control	0x0200
+
+#endif
+
+#undef C
+#undef Assembly
diff --git a/arch/arm/mach-sa1100/include/mach/SA-1111.h b/arch/arm/mach-sa1100/include/mach/SA-1111.h
new file mode 100644
index 000000000000..c38f60915cb6
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/SA-1111.h
@@ -0,0 +1,5 @@
+/*
+ * Moved to new location
+ */
+#warning using old SA-1111.h - update to <asm/hardware/sa1111.h>
+#include <asm/hardware/sa1111.h>
diff --git a/arch/arm/mach-sa1100/include/mach/assabet.h b/arch/arm/mach-sa1100/include/mach/assabet.h
new file mode 100644
index 000000000000..3959b20d5d1c
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/assabet.h
@@ -0,0 +1,105 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/assabet.h
+ *
+ * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ *      Definitions for Neponset added.
+ */
+#ifndef __ASM_ARCH_ASSABET_H
+#define __ASM_ARCH_ASSABET_H
+
+
+/* System Configuration Register flags */
+
+#define ASSABET_SCR_SDRAM_LOW	(1<<2)	/* SDRAM size (low bit) */
+#define ASSABET_SCR_SDRAM_HIGH	(1<<3)	/* SDRAM size (high bit) */
+#define ASSABET_SCR_FLASH_LOW	(1<<4)	/* Flash size (low bit) */
+#define ASSABET_SCR_FLASH_HIGH	(1<<5)	/* Flash size (high bit) */
+#define ASSABET_SCR_GFX		(1<<8)	/* Graphics Accelerator (0 = present) */
+#define ASSABET_SCR_SA1111	(1<<9)	/* Neponset (0 = present) */
+
+#define ASSABET_SCR_INIT	-1
+
+extern unsigned long SCR_value;
+
+#ifdef CONFIG_ASSABET_NEPONSET
+#define machine_has_neponset()  ((SCR_value & ASSABET_SCR_SA1111) == 0)
+#else
+#define machine_has_neponset()	(0)
+#endif
+
+/* Board Control Register */
+
+#define ASSABET_BCR_BASE  0xf1000000
+#define ASSABET_BCR (*(volatile unsigned int *)(ASSABET_BCR_BASE))
+
+#define ASSABET_BCR_CF_PWR	(1<<0)	/* Compact Flash Power (1 = 3.3v, 0 = off) */
+#define ASSABET_BCR_CF_RST	(1<<1)	/* Compact Flash Reset (1 = power up reset) */
+#define ASSABET_BCR_GFX_RST	(1<<1)	/* Graphics Accelerator Reset (0 = hold reset) */
+#define ASSABET_BCR_CODEC_RST	(1<<2)	/* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */
+#define ASSABET_BCR_IRDA_FSEL	(1<<3)	/* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */
+#define ASSABET_BCR_IRDA_MD0	(1<<4)	/* Range/Power select */
+#define ASSABET_BCR_IRDA_MD1	(1<<5)	/* Range/Power select */
+#define ASSABET_BCR_STEREO_LB	(1<<6)	/* Stereo Loopback */
+#define ASSABET_BCR_CF_BUS_OFF	(1<<7)	/* Compact Flash bus (0 = on, 1 = off (float)) */
+#define ASSABET_BCR_AUDIO_ON	(1<<8)	/* Audio power on */
+#define ASSABET_BCR_LIGHT_ON	(1<<9)	/* Backlight */
+#define ASSABET_BCR_LCD_12RGB	(1<<10)	/* 0 = 16RGB, 1 = 12RGB */
+#define ASSABET_BCR_LCD_ON	(1<<11)	/* LCD power on */
+#define ASSABET_BCR_RS232EN	(1<<12)	/* RS232 transceiver enable */
+#define ASSABET_BCR_LED_RED	(1<<13)	/* D9 (0 = on, 1 = off) */
+#define ASSABET_BCR_LED_GREEN	(1<<14)	/* D8 (0 = on, 1 = off) */
+#define ASSABET_BCR_VIB_ON	(1<<15)	/* Vibration motor (quiet alert) */
+#define ASSABET_BCR_COM_DTR	(1<<16)	/* COMport Data Terminal Ready */
+#define ASSABET_BCR_COM_RTS	(1<<17)	/* COMport Request To Send */
+#define ASSABET_BCR_RAD_WU	(1<<18)	/* Radio wake up interrupt */
+#define ASSABET_BCR_SMB_EN	(1<<19)	/* System management bus enable */
+#define ASSABET_BCR_TV_IR_DEC	(1<<20)	/* TV IR Decode Enable (not implemented) */
+#define ASSABET_BCR_QMUTE	(1<<21)	/* Quick Mute */
+#define ASSABET_BCR_RAD_ON	(1<<22)	/* Radio Power On */
+#define ASSABET_BCR_SPK_OFF	(1<<23)	/* 1 = Speaker amplifier power off */
+
+#ifdef CONFIG_SA1100_ASSABET
+extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set);
+#else
+#define ASSABET_BCR_frob(x,y)	do { } while (0)
+#endif
+
+#define ASSABET_BCR_set(x)	ASSABET_BCR_frob((x), (x))
+#define ASSABET_BCR_clear(x)	ASSABET_BCR_frob((x), 0)
+
+#define ASSABET_BSR_BASE	0xf1000000
+#define ASSABET_BSR (*(volatile unsigned int*)(ASSABET_BSR_BASE))
+
+#define ASSABET_BSR_RS232_VALID	(1 << 24)
+#define ASSABET_BSR_COM_DCD	(1 << 25)
+#define ASSABET_BSR_COM_CTS	(1 << 26)
+#define ASSABET_BSR_COM_DSR	(1 << 27)
+#define ASSABET_BSR_RAD_CTS	(1 << 28)
+#define ASSABET_BSR_RAD_DSR	(1 << 29)
+#define ASSABET_BSR_RAD_DCD	(1 << 30)
+#define ASSABET_BSR_RAD_RI	(1 << 31)
+
+
+/* GPIOs for which the generic definition doesn't say much */
+#define ASSABET_GPIO_RADIO_IRQ		GPIO_GPIO (14)	/* Radio interrupt request  */
+#define ASSABET_GPIO_PS_MODE_SYNC	GPIO_GPIO (16)	/* Power supply mode/sync   */
+#define ASSABET_GPIO_STEREO_64FS_CLK	GPIO_GPIO (19)	/* SSP UDA1341 clock input  */
+#define ASSABET_GPIO_CF_IRQ		GPIO_GPIO (21)	/* CF IRQ   */
+#define ASSABET_GPIO_CF_CD		GPIO_GPIO (22)	/* CF CD */
+#define ASSABET_GPIO_CF_BVD2		GPIO_GPIO (24)	/* CF BVD */
+#define ASSABET_GPIO_GFX_IRQ		GPIO_GPIO (24)	/* Graphics IRQ */
+#define ASSABET_GPIO_CF_BVD1		GPIO_GPIO (25)	/* CF BVD */
+#define ASSABET_GPIO_BATT_LOW		GPIO_GPIO (26)	/* Low battery */
+#define ASSABET_GPIO_RCLK		GPIO_GPIO (26)	/* CCLK/2  */
+
+#define ASSABET_IRQ_GPIO_CF_IRQ		IRQ_GPIO21
+#define ASSABET_IRQ_GPIO_CF_CD		IRQ_GPIO22
+#define ASSABET_IRQ_GPIO_CF_BVD2	IRQ_GPIO24
+#define ASSABET_IRQ_GPIO_CF_BVD1	IRQ_GPIO25
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/badge4.h b/arch/arm/mach-sa1100/include/mach/badge4.h
new file mode 100644
index 000000000000..44d2e1bfc04b
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/badge4.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/badge4.h
+ *
+ *   Tim Connors <connors@hpl.hp.com>
+ *   Christopher Hoover <ch@hpl.hp.com>
+ *
+ * Copyright (C) 2002 Hewlett-Packard Company
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#error "include <mach/hardware.h> instead"
+#endif
+
+#define BADGE4_SA1111_BASE		(0x48000000)
+
+/* GPIOs on the BadgePAD 4 */
+#define BADGE4_GPIO_INT_1111		GPIO_GPIO0   /* SA-1111 IRQ */
+
+#define BADGE4_GPIO_INT_VID		GPIO_GPIO1   /* Video expansion */
+#define BADGE4_GPIO_LGP2		GPIO_GPIO2   /* GPIO_LDD8 */
+#define BADGE4_GPIO_LGP3		GPIO_GPIO3   /* GPIO_LDD9 */
+#define BADGE4_GPIO_LGP4		GPIO_GPIO4   /* GPIO_LDD10 */
+#define BADGE4_GPIO_LGP5		GPIO_GPIO5   /* GPIO_LDD11 */
+#define BADGE4_GPIO_LGP6		GPIO_GPIO6   /* GPIO_LDD12 */
+#define BADGE4_GPIO_LGP7		GPIO_GPIO7   /* GPIO_LDD13 */
+#define BADGE4_GPIO_LGP8		GPIO_GPIO8   /* GPIO_LDD14 */
+#define BADGE4_GPIO_LGP9		GPIO_GPIO9   /* GPIO_LDD15 */
+#define BADGE4_GPIO_GPA_VID		GPIO_GPIO10  /* Video expansion */
+#define BADGE4_GPIO_GPB_VID		GPIO_GPIO11  /* Video expansion */
+#define BADGE4_GPIO_GPC_VID		GPIO_GPIO12  /* Video expansion */
+
+#define BADGE4_GPIO_UART_HS1		GPIO_GPIO13
+#define BADGE4_GPIO_UART_HS2		GPIO_GPIO14
+
+#define BADGE4_GPIO_MUXSEL0		GPIO_GPIO15
+#define BADGE4_GPIO_TESTPT_J7		GPIO_GPIO16
+
+#define BADGE4_GPIO_SDSDA		GPIO_GPIO17  /* SDRAM SPD Data */
+#define BADGE4_GPIO_SDSCL		GPIO_GPIO18  /* SDRAM SPD Clock */
+#define BADGE4_GPIO_SDTYP0		GPIO_GPIO19  /* SDRAM Type Control */
+#define BADGE4_GPIO_SDTYP1		GPIO_GPIO20  /* SDRAM Type Control */
+
+#define BADGE4_GPIO_BGNT_1111		GPIO_GPIO21  /* GPIO_MBGNT */
+#define BADGE4_GPIO_BREQ_1111		GPIO_GPIO22  /* GPIO_TREQA */
+
+#define BADGE4_GPIO_TESTPT_J6		GPIO_GPIO23
+
+#define BADGE4_GPIO_PCMEN5V		GPIO_GPIO24  /* 5V power */
+
+#define BADGE4_GPIO_SA1111_NRST		GPIO_GPIO25  /* SA-1111 nRESET */
+
+#define BADGE4_GPIO_TESTPT_J5		GPIO_GPIO26
+
+#define BADGE4_GPIO_CLK_1111		GPIO_GPIO27  /* GPIO_32_768kHz */
+
+/* Interrupts on the BadgePAD 4 */
+#define BADGE4_IRQ_GPIO_SA1111		IRQ_GPIO0    /* SA-1111 interrupt */
+
+
+/* PCM5ENV Usage tracking */
+
+#define BADGE4_5V_PCMCIA_SOCK0		(1<<0)
+#define BADGE4_5V_PCMCIA_SOCK1		(1<<1)
+#define BADGE4_5V_PCMCIA_SOCK(n)	(1<<(n))
+#define BADGE4_5V_USB			(1<<2)
+#define BADGE4_5V_INITIALLY		(1<<3)
+
+#ifndef __ASSEMBLY__
+extern void badge4_set_5V(unsigned subsystem, int on);
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/bitfield.h b/arch/arm/mach-sa1100/include/mach/bitfield.h
new file mode 100644
index 000000000000..f1f0e3387d9c
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/bitfield.h
@@ -0,0 +1,113 @@
+/*
+ *	FILE    	bitfield.h
+ *
+ *	Version 	1.1
+ *	Author  	Copyright (c) Marc A. Viredaz, 1998
+ *	        	DEC Western Research Laboratory, Palo Alto, CA
+ *	Date    	April 1998 (April 1997)
+ *	System  	Advanced RISC Machine (ARM)
+ *	Language	C or ARM Assembly
+ *	Purpose 	Definition of macros to operate on bit fields.
+ */
+
+
+
+#ifndef __BITFIELD_H
+#define __BITFIELD_H
+
+#ifndef __ASSEMBLY__
+#define UData(Data)	((unsigned long) (Data))
+#else
+#define UData(Data)	(Data)
+#endif
+
+
+/*
+ * MACRO: Fld
+ *
+ * Purpose
+ *    The macro "Fld" encodes a bit field, given its size and its shift value
+ *    with respect to bit 0.
+ *
+ * Note
+ *    A more intuitive way to encode bit fields would have been to use their
+ *    mask. However, extracting size and shift value information from a bit
+ *    field's mask is cumbersome and might break the assembler (255-character
+ *    line-size limit).
+ *
+ * Input
+ *    Size      	Size of the bit field, in number of bits.
+ *    Shft      	Shift value of the bit field with respect to bit 0.
+ *
+ * Output
+ *    Fld       	Encoded bit field.
+ */
+
+#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
+
+
+/*
+ * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
+ *
+ * Purpose
+ *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
+ *    the size, shift value, mask, aligned mask, and first bit of a
+ *    bit field.
+ *
+ * Input
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FSize     	Size of the bit field, in number of bits.
+ *    FShft     	Shift value of the bit field with respect to bit 0.
+ *    FMsk      	Mask for the bit field.
+ *    FAlnMsk   	Mask for the bit field, aligned on bit 0.
+ *    F1stBit   	First bit of the bit field.
+ */
+
+#define FSize(Field)	((Field) >> 16)
+#define FShft(Field)	((Field) & 0x0000FFFF)
+#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
+#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
+#define F1stBit(Field)	(UData (1) << FShft (Field))
+
+
+/*
+ * MACRO: FInsrt
+ *
+ * Purpose
+ *    The macro "FInsrt" inserts a value into a bit field by shifting the
+ *    former appropriately.
+ *
+ * Input
+ *    Value     	Bit-field value.
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FInsrt    	Bit-field value positioned appropriately.
+ */
+
+#define FInsrt(Value, Field) \
+                	(UData (Value) << FShft (Field))
+
+
+/*
+ * MACRO: FExtr
+ *
+ * Purpose
+ *    The macro "FExtr" extracts the value of a bit field by masking and
+ *    shifting it appropriately.
+ *
+ * Input
+ *    Data      	Data containing the bit-field to be extracted.
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FExtr     	Bit-field value.
+ */
+
+#define FExtr(Data, Field) \
+                	((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
+
+
+#endif /* __BITFIELD_H */
diff --git a/arch/arm/mach-sa1100/include/mach/cerf.h b/arch/arm/mach-sa1100/include/mach/cerf.h
new file mode 100644
index 000000000000..c3ac3d0f9465
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/cerf.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/cerf.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Apr-2003 : Removed some old PDA crud [FB]
+ */
+#ifndef _INCLUDE_CERF_H_
+#define _INCLUDE_CERF_H_
+
+
+#define CERF_ETH_IO			0xf0000000
+#define CERF_ETH_IRQ IRQ_GPIO26
+
+#define CERF_GPIO_CF_BVD2		GPIO_GPIO (19)
+#define CERF_GPIO_CF_BVD1		GPIO_GPIO (20)
+#define CERF_GPIO_CF_RESET		GPIO_GPIO (21)
+#define CERF_GPIO_CF_IRQ		GPIO_GPIO (22)
+#define CERF_GPIO_CF_CD			GPIO_GPIO (23)
+
+#define CERF_IRQ_GPIO_CF_BVD2		IRQ_GPIO19
+#define CERF_IRQ_GPIO_CF_BVD1		IRQ_GPIO20
+#define CERF_IRQ_GPIO_CF_IRQ		IRQ_GPIO22
+#define CERF_IRQ_GPIO_CF_CD		IRQ_GPIO23
+
+#endif // _INCLUDE_CERF_H_
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
new file mode 100644
index 000000000000..69e962416e3f
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/collie.h
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * ChangeLog:
+ *   04-06-2001 Lineo Japan, Inc.
+ *   04-16-2001 SHARP Corporation
+ *   07-07-2002 Chris Larson <clarson@digi.com>
+ *
+ */
+#ifndef __ASM_ARCH_COLLIE_H
+#define __ASM_ARCH_COLLIE_H
+
+
+#define COLLIE_SCP_CHARGE_ON	SCOOP_GPCR_PA11
+#define COLLIE_SCP_DIAG_BOOT1	SCOOP_GPCR_PA12
+#define COLLIE_SCP_DIAG_BOOT2	SCOOP_GPCR_PA13
+#define COLLIE_SCP_MUTE_L	SCOOP_GPCR_PA14
+#define COLLIE_SCP_MUTE_R	SCOOP_GPCR_PA15
+#define COLLIE_SCP_5VON		SCOOP_GPCR_PA16
+#define COLLIE_SCP_AMP_ON	SCOOP_GPCR_PA17
+#define COLLIE_SCP_VPEN		SCOOP_GPCR_PA18
+#define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19
+
+#define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_CHARGE_ON | COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | COLLIE_SCP_VPEN | \
+				COLLIE_SCP_LB_VOL_CHG )
+#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | COLLIE_SCP_VPEN | \
+				COLLIE_SCP_CHARGE_ON )
+
+/* GPIOs for which the generic definition doesn't say much */
+
+#define COLLIE_GPIO_ON_KEY		GPIO_GPIO (0)
+#define COLLIE_GPIO_AC_IN		GPIO_GPIO (1)
+#define COLLIE_GPIO_SDIO_INT		GPIO_GPIO (11)
+#define COLLIE_GPIO_CF_IRQ		GPIO_GPIO (14)
+#define COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO (15)
+#define COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO (16)
+#define COLLIE_GPIO_nMIC_ON		GPIO_GPIO (17)
+#define COLLIE_GPIO_nREMOCON_ON		GPIO_GPIO (18)
+#define COLLIE_GPIO_CO			GPIO_GPIO (20)
+#define COLLIE_GPIO_MCP_CLK		GPIO_GPIO (21)
+#define COLLIE_GPIO_CF_CD		GPIO_GPIO (22)
+#define COLLIE_GPIO_UCB1x00_IRQ		GPIO_GPIO (23)
+#define COLLIE_GPIO_WAKEUP		GPIO_GPIO (24)
+#define COLLIE_GPIO_GA_INT		GPIO_GPIO (25)
+#define COLLIE_GPIO_MAIN_BAT_LOW	GPIO_GPIO (26)
+
+/* Interrupts */
+
+#define COLLIE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
+#define COLLIE_IRQ_GPIO_AC_IN		IRQ_GPIO1
+#define COLLIE_IRQ_GPIO_SDIO_IRQ	IRQ_GPIO11
+#define COLLIE_IRQ_GPIO_CF_IRQ		IRQ_GPIO14
+#define COLLIE_IRQ_GPIO_nREMOCON_INT	IRQ_GPIO15
+#define COLLIE_IRQ_GPIO_CO		IRQ_GPIO20
+#define COLLIE_IRQ_GPIO_CF_CD		IRQ_GPIO22
+#define COLLIE_IRQ_GPIO_UCB1x00_IRQ	IRQ_GPIO23
+#define COLLIE_IRQ_GPIO_WAKEUP		IRQ_GPIO24
+#define COLLIE_IRQ_GPIO_GA_INT		IRQ_GPIO25
+#define COLLIE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO26
+
+#define COLLIE_LCM_IRQ_GPIO_RTS		IRQ_LOCOMO_GPIO0
+#define COLLIE_LCM_IRQ_GPIO_CTS		IRQ_LOCOMO_GPIO1
+#define COLLIE_LCM_IRQ_GPIO_DSR		IRQ_LOCOMO_GPIO2
+#define COLLIE_LCM_IRQ_GPIO_DTR		IRQ_LOCOMO_GPIO3
+#define COLLIE_LCM_IRQ_GPIO_nSD_DETECT	IRQ_LOCOMO_GPIO13
+#define COLLIE_LCM_IRQ_GPIO_nSD_WP	IRQ_LOCOMO_GPIO14
+
+/* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
+#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0	/* GPIO0=Version                 */
+#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1	/* GPIO1=TBL_CHK                 */
+#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2	/* GPIO2=VPNE_ON                 */
+#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3	/* GPIO3=IR_ON                   */
+#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4	/* GPIO4=AMP_ON                  */
+#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5	/* GPIO5=Version                 */
+#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5	/* GPIO5=fs 8k LPF               */
+#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6	/* GPIO6=BUZZER BIAS             */
+#define COLLIE_TC35143_GPIO_MBAT_ON     UCB_IO_7	/* GPIO7=MBAT_ON                 */
+#define COLLIE_TC35143_GPIO_BBAT_ON     UCB_IO_8	/* GPIO8=BBAT_ON                 */
+#define COLLIE_TC35143_GPIO_TMP_ON      UCB_IO_9	/* GPIO9=TMP_ON                  */
+#define COLLIE_TC35143_GPIO_IN		( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
+#define COLLIE_TC35143_GPIO_OUT		( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
+					UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
new file mode 100644
index 000000000000..1f0634d92702
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -0,0 +1,58 @@
+/* arch/arm/mach-sa1100/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+#include <mach/hardware.h>
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x80000000	@ physical base address
+		movne	\rx, #0xf8000000	@ virtual address
+
+		@ We probe for the active serial port here, coherently with
+		@ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
+		@ We assume r1 can be clobbered.
+
+		@ see if Ser3 is active
+		add	\rx, \rx, #0x00050000
+		ldr	r1, [\rx, #UTCR3]
+		tst	r1, #UTCR3_TXE
+
+		@ if Ser3 is inactive, then try Ser1
+		addeq	\rx, \rx, #(0x00010000 - 0x00050000)
+		ldreq	r1, [\rx, #UTCR3]
+		tsteq	r1, #UTCR3_TXE
+
+		@ if Ser1 is inactive, then try Ser2
+		addeq	\rx, \rx, #(0x00030000 - 0x00010000)
+		ldreq	r1, [\rx, #UTCR3]
+		tsteq	r1, #UTCR3_TXE
+
+		@ if all ports are inactive, then there is nothing we can do
+		moveq	pc, lr
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #UTDR]
+		.endm
+
+		.macro	waituart,rd,rx
+1001:		ldr	\rd, [\rx, #UTSR1]
+		tst	\rd, #UTSR1_TNF
+		beq	1001b
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldr	\rd, [\rx, #UTSR1]
+		tst	\rd, #UTSR1_TBY
+		bne	1001b
+		.endm
diff --git a/arch/arm/mach-sa1100/include/mach/dma.h b/arch/arm/mach-sa1100/include/mach/dma.h
new file mode 100644
index 000000000000..dda1b351310d
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/dma.h
@@ -0,0 +1,117 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/dma.h
+ *
+ * Generic SA1100 DMA support
+ *
+ * Copyright (C) 2000 Nicolas Pitre
+ *
+ */
+
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include "hardware.h"
+
+
+/*
+ * The SA1100 has six internal DMA channels.
+ */
+#define SA1100_DMA_CHANNELS	6
+
+/*
+ * Maximum physical DMA buffer size
+ */
+#define MAX_DMA_SIZE		0x1fff
+#define CUT_DMA_SIZE		0x1000
+
+/*
+ * All possible SA1100 devices a DMA channel can be attached to.
+ */
+typedef enum {
+	DMA_Ser0UDCWr  = DDAR_Ser0UDCWr,   /* Ser. port 0 UDC Write */
+	DMA_Ser0UDCRd  = DDAR_Ser0UDCRd,   /* Ser. port 0 UDC Read */
+	DMA_Ser1UARTWr = DDAR_Ser1UARTWr,  /* Ser. port 1 UART Write */
+	DMA_Ser1UARTRd = DDAR_Ser1UARTRd,  /* Ser. port 1 UART Read */
+	DMA_Ser1SDLCWr = DDAR_Ser1SDLCWr,  /* Ser. port 1 SDLC Write */
+	DMA_Ser1SDLCRd = DDAR_Ser1SDLCRd,  /* Ser. port 1 SDLC Read */
+	DMA_Ser2UARTWr = DDAR_Ser2UARTWr,  /* Ser. port 2 UART Write */
+	DMA_Ser2UARTRd = DDAR_Ser2UARTRd,  /* Ser. port 2 UART Read */
+	DMA_Ser2HSSPWr = DDAR_Ser2HSSPWr,  /* Ser. port 2 HSSP Write */
+	DMA_Ser2HSSPRd = DDAR_Ser2HSSPRd,  /* Ser. port 2 HSSP Read */
+	DMA_Ser3UARTWr = DDAR_Ser3UARTWr,  /* Ser. port 3 UART Write */
+	DMA_Ser3UARTRd = DDAR_Ser3UARTRd,  /* Ser. port 3 UART Read */
+	DMA_Ser4MCP0Wr = DDAR_Ser4MCP0Wr,  /* Ser. port 4 MCP 0 Write (audio) */
+	DMA_Ser4MCP0Rd = DDAR_Ser4MCP0Rd,  /* Ser. port 4 MCP 0 Read (audio) */
+	DMA_Ser4MCP1Wr = DDAR_Ser4MCP1Wr,  /* Ser. port 4 MCP 1 Write */
+	DMA_Ser4MCP1Rd = DDAR_Ser4MCP1Rd,  /* Ser. port 4 MCP 1 Read */
+	DMA_Ser4SSPWr  = DDAR_Ser4SSPWr,   /* Ser. port 4 SSP Write (16 bits) */
+	DMA_Ser4SSPRd  = DDAR_Ser4SSPRd    /* Ser. port 4 SSP Read (16 bits) */
+} dma_device_t;
+
+typedef struct {
+	volatile u_long DDAR;
+	volatile u_long SetDCSR;
+	volatile u_long ClrDCSR;
+	volatile u_long RdDCSR;
+	volatile dma_addr_t DBSA;
+	volatile u_long DBTA;
+	volatile dma_addr_t DBSB;
+	volatile u_long DBTB;
+} dma_regs_t;
+
+typedef void (*dma_callback_t)(void *data);
+
+/*
+ * DMA function prototypes
+ */
+
+extern int sa1100_request_dma( dma_device_t device, const char *device_id,
+			       dma_callback_t callback, void *data,
+			       dma_regs_t **regs );
+extern void sa1100_free_dma( dma_regs_t *regs );
+extern int sa1100_start_dma( dma_regs_t *regs, dma_addr_t dma_ptr, u_int size );
+extern dma_addr_t sa1100_get_dma_pos(dma_regs_t *regs);
+extern void sa1100_reset_dma(dma_regs_t *regs);
+
+/**
+ * 	sa1100_stop_dma - stop DMA in progress
+ * 	@regs: identifier for the channel to use
+ *
+ * 	This stops DMA without clearing buffer pointers. Unlike
+ * 	sa1100_clear_dma() this allows subsequent use of sa1100_resume_dma()
+ * 	or sa1100_get_dma_pos().
+ *
+ * 	The @regs identifier is provided by a successful call to
+ * 	sa1100_request_dma().
+ **/
+
+#define sa1100_stop_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN)
+
+/**
+ * 	sa1100_resume_dma - resume DMA on a stopped channel
+ * 	@regs: identifier for the channel to use
+ *
+ * 	This resumes DMA on a channel previously stopped with
+ * 	sa1100_stop_dma().
+ *
+ * 	The @regs identifier is provided by a successful call to
+ * 	sa1100_request_dma().
+ **/
+
+#define sa1100_resume_dma(regs)	((regs)->SetDCSR = DCSR_IE|DCSR_RUN)
+
+/**
+ * 	sa1100_clear_dma - clear DMA pointers
+ * 	@regs: identifier for the channel to use
+ *
+ * 	This clear any DMA state so the DMA engine is ready to restart
+ * 	with new buffers through sa1100_start_dma(). Any buffers in flight
+ * 	are discarded.
+ *
+ * 	The @regs identifier is provided by a successful call to
+ * 	sa1100_request_dma().
+ **/
+
+#define sa1100_clear_dma(regs)	((regs)->ClrDCSR = DCSR_IE|DCSR_RUN|DCSR_STRTA|DCSR_STRTB)
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-sa1100/include/mach/entry-macro.S b/arch/arm/mach-sa1100/include/mach/entry-macro.S
new file mode 100644
index 000000000000..6aa13c46c5d3
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/entry-macro.S
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for SA1100-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		mov	\base, #0xfa000000		@ ICIP = 0xfa050000
+		add	\base, \base, #0x00050000
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base]		@ get irqs
+		ldr	\irqnr, [\base, #4]		@ ICMR = 0xfa050004
+		ands	\irqstat, \irqstat, \irqnr
+		mov	\irqnr, #0
+		beq	1001f
+		tst	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tsteq	\irqstat, #0xff
+		moveq	\irqstat, \irqstat, lsr #8
+		addeq	\irqnr, \irqnr, #8
+		tst	\irqstat, #0x0f
+		moveq	\irqstat, \irqstat, lsr #4
+		addeq	\irqnr, \irqnr, #4
+		tst	\irqstat, #0x03
+		moveq	\irqstat, \irqstat, lsr #2
+		addeq	\irqnr, \irqnr, #2
+		tst	\irqstat, #0x01
+		addeqs	\irqnr, \irqnr, #1
+1001:
+		.endm
+
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
new file mode 100644
index 000000000000..582a0c92da53
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/gpio.h
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/gpio.h
+ *
+ * SA1100 GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_SA1100_GPIO_H
+#define __ASM_ARCH_SA1100_GPIO_H
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+		return GPLR & GPIO_GPIO(gpio);
+	else
+		return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
+		if (value)
+			GPSR = GPIO_GPIO(gpio);
+		else
+			GPCR = GPIO_GPIO(gpio);
+	else
+		__gpio_set_value(gpio, value);
+}
+
+#define gpio_cansleep	__gpio_cansleep
+
+static inline unsigned gpio_to_irq(unsigned gpio)
+{
+	if (gpio < 11)
+		return IRQ_GPIO0 + gpio;
+	else
+		return IRQ_GPIO11 - 11 + gpio;
+}
+
+static inline unsigned irq_to_gpio(unsigned irq)
+{
+	if (irq < IRQ_GPIO11_27)
+		return irq - IRQ_GPIO0;
+	else
+		return irq - IRQ_GPIO11 + 11;
+}
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
new file mode 100644
index 000000000000..3ca0ecf095e6
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/h3600.h
@@ -0,0 +1,169 @@
+/*
+ *
+ * Definitions for H3600 Handheld Computer
+ *
+ * Copyright 2000 Compaq Computer Corporation.
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks.
+ *
+ * History:
+ *
+ * 2001-10-??	Andrew Christian   Added support for iPAQ H3800
+ *
+ */
+
+#ifndef _INCLUDE_H3600_H_
+#define _INCLUDE_H3600_H_
+
+typedef int __bitwise pm_request_t;
+
+#define PM_SUSPEND	((__force pm_request_t) 1)	/* enter D1-D3 */
+#define PM_RESUME	((__force pm_request_t) 2)	/* enter D0 */
+
+/* generalized support for H3xxx series Compaq Pocket PC's */
+#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600() || machine_is_h3800())
+
+/* Physical memory regions corresponding to chip selects */
+#define H3600_EGPIO_PHYS     (SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS    SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS    SA1100_CS4_PHYS
+
+/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
+#define H3600_EGPIO_VIRT     0xf0000000
+#define H3600_BANK_2_VIRT    0xf1000000
+#define H3600_BANK_4_VIRT    0xf3800000
+
+/*
+   Machine-independent GPIO definitions
+   --- these are common across all current iPAQ platforms
+*/
+
+#define GPIO_H3600_NPOWER_BUTTON	GPIO_GPIO (0)	/* Also known as the "off button"  */
+
+#define GPIO_H3600_PCMCIA_CD1		GPIO_GPIO (10)
+#define GPIO_H3600_PCMCIA_IRQ1		GPIO_GPIO (11)
+
+/* UDA1341 L3 Interface */
+#define GPIO_H3600_L3_DATA		GPIO_GPIO (14)
+#define GPIO_H3600_L3_MODE		GPIO_GPIO (15)
+#define GPIO_H3600_L3_CLOCK		GPIO_GPIO (16)
+
+#define GPIO_H3600_PCMCIA_CD0		GPIO_GPIO (17)
+#define GPIO_H3600_SYS_CLK		GPIO_GPIO (19)
+#define GPIO_H3600_PCMCIA_IRQ0		GPIO_GPIO (21)
+
+#define GPIO_H3600_COM_DCD		GPIO_GPIO (23)
+#define GPIO_H3600_OPT_IRQ		GPIO_GPIO (24)
+#define GPIO_H3600_COM_CTS		GPIO_GPIO (25)
+#define GPIO_H3600_COM_RTS		GPIO_GPIO (26)
+
+#define IRQ_GPIO_H3600_NPOWER_BUTTON	IRQ_GPIO0
+#define IRQ_GPIO_H3600_PCMCIA_CD1	IRQ_GPIO10
+#define IRQ_GPIO_H3600_PCMCIA_IRQ1	IRQ_GPIO11
+#define IRQ_GPIO_H3600_PCMCIA_CD0	IRQ_GPIO17
+#define IRQ_GPIO_H3600_PCMCIA_IRQ0	IRQ_GPIO21
+#define IRQ_GPIO_H3600_COM_DCD		IRQ_GPIO23
+#define IRQ_GPIO_H3600_OPT_IRQ		IRQ_GPIO24
+#define IRQ_GPIO_H3600_COM_CTS		IRQ_GPIO25
+
+
+#ifndef __ASSEMBLY__
+
+enum ipaq_egpio_type {
+	IPAQ_EGPIO_LCD_POWER,	  /* Power to the LCD panel */
+	IPAQ_EGPIO_CODEC_NRESET,  /* Clear to reset the audio codec (remember to return high) */
+	IPAQ_EGPIO_AUDIO_ON,	  /* Audio power */
+	IPAQ_EGPIO_QMUTE,	  /* Audio muting */
+	IPAQ_EGPIO_OPT_NVRAM_ON,  /* Non-volatile RAM on extension sleeves (SPI interface) */
+	IPAQ_EGPIO_OPT_ON,	  /* Power to extension sleeves */
+	IPAQ_EGPIO_CARD_RESET,	  /* Reset PCMCIA cards on extension sleeve (???) */
+	IPAQ_EGPIO_OPT_RESET,	  /* Reset option pack (???) */
+	IPAQ_EGPIO_IR_ON,	  /* IR sensor/emitter power */
+	IPAQ_EGPIO_IR_FSEL,	  /* IR speed selection 1->fast, 0->slow */
+	IPAQ_EGPIO_RS232_ON,	  /* Maxim RS232 chip power */
+	IPAQ_EGPIO_VPP_ON,	  /* Turn on power to flash programming */
+	IPAQ_EGPIO_LCD_ENABLE,	  /* Enable/disable LCD controller */
+};
+
+struct ipaq_model_ops {
+	const char     *generic_name;
+	void	      (*control)(enum ipaq_egpio_type, int);
+	unsigned long (*read)(void);
+	void	      (*blank_callback)(int blank);
+	int	      (*pm_callback)(int req);	    /* Primary model callback */
+	int	      (*pm_callback_aux)(int req);  /* Secondary callback (used by HAL modules) */
+};
+
+extern struct ipaq_model_ops ipaq_model_ops;
+
+static __inline__ const char * h3600_generic_name(void)
+{
+	return ipaq_model_ops.generic_name;
+}
+
+static __inline__ void assign_h3600_egpio(enum ipaq_egpio_type x, int level)
+{
+	if (ipaq_model_ops.control)
+		ipaq_model_ops.control(x,level);
+}
+
+static __inline__ void clr_h3600_egpio(enum ipaq_egpio_type x)
+{
+	if (ipaq_model_ops.control)
+		ipaq_model_ops.control(x,0);
+}
+
+static __inline__ void set_h3600_egpio(enum ipaq_egpio_type x)
+{
+	if (ipaq_model_ops.control)
+		ipaq_model_ops.control(x,1);
+}
+
+static __inline__ unsigned long read_h3600_egpio(void)
+{
+	if (ipaq_model_ops.read)
+		return ipaq_model_ops.read();
+	return 0;
+}
+
+static __inline__ int  h3600_register_blank_callback(void (*f)(int))
+{
+	ipaq_model_ops.blank_callback = f;
+	return 0;
+}
+
+static __inline__ void h3600_unregister_blank_callback(void (*f)(int))
+{
+	ipaq_model_ops.blank_callback = NULL;
+}
+
+
+static __inline__ int  h3600_register_pm_callback(int (*f)(int))
+{
+	ipaq_model_ops.pm_callback_aux = f;
+	return 0;
+}
+
+static __inline__ void h3600_unregister_pm_callback(int (*f)(int))
+{
+	ipaq_model_ops.pm_callback_aux = NULL;
+}
+
+static __inline__ int h3600_power_management(int req)
+{
+	if (ipaq_model_ops.pm_callback)
+		return ipaq_model_ops.pm_callback(req);
+	return 0;
+}
+
+#endif /* ASSEMBLY */
+
+#endif /* _INCLUDE_H3600_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
new file mode 100644
index 000000000000..62b0b7879685
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
@@ -0,0 +1,540 @@
+/*
+ *
+ * Definitions for H3600 Handheld Computer
+ *
+ * Copyright 2000 Compaq Computer Corporation.
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks.
+ *
+ * History:
+ *
+ * 2001-10-??   Andrew Christian   Added support for iPAQ H3800
+ *
+ */
+
+#ifndef _INCLUDE_H3600_GPIO_H_
+#define _INCLUDE_H3600_GPIO_H_
+
+/*
+ * GPIO lines that are common across ALL iPAQ models are in "h3600.h"
+ * This file contains machine-specific definitions
+ */
+
+#define GPIO_H3600_SUSPEND              GPIO_GPIO (0)
+/* GPIO[2:9] used by LCD on H3600/3800, used as GPIO on H3100 */
+#define GPIO_H3100_BT_ON		GPIO_GPIO (2)
+#define GPIO_H3100_GPIO3		GPIO_GPIO (3)
+#define GPIO_H3100_QMUTE		GPIO_GPIO (4)
+#define GPIO_H3100_LCD_3V_ON		GPIO_GPIO (5)
+#define GPIO_H3100_AUD_ON		GPIO_GPIO (6)
+#define GPIO_H3100_AUD_PWR_ON		GPIO_GPIO (7)
+#define GPIO_H3100_IR_ON		GPIO_GPIO (8)
+#define GPIO_H3100_IR_FSEL		GPIO_GPIO (9)
+
+/* for H3600, audio sample rate clock generator */
+#define GPIO_H3600_CLK_SET0		GPIO_GPIO (12)
+#define GPIO_H3600_CLK_SET1		GPIO_GPIO (13)
+
+#define GPIO_H3600_ACTION_BUTTON	GPIO_GPIO (18)
+#define GPIO_H3600_SOFT_RESET           GPIO_GPIO (20)   /* Also known as BATT_FAULT */
+#define GPIO_H3600_OPT_LOCK		GPIO_GPIO (22)
+#define GPIO_H3600_OPT_DET		GPIO_GPIO (27)
+
+/* H3800 specific pins */
+#define GPIO_H3800_AC_IN                GPIO_GPIO (12)
+#define GPIO_H3800_COM_DSR              GPIO_GPIO (13)
+#define GPIO_H3800_MMC_INT              GPIO_GPIO (18)
+#define GPIO_H3800_NOPT_IND             GPIO_GPIO (20)   /* Almost exactly the same as GPIO_H3600_OPT_DET */
+#define GPIO_H3800_OPT_BAT_FAULT        GPIO_GPIO (22)
+#define GPIO_H3800_CLK_OUT              GPIO_GPIO (27)
+
+/****************************************************/
+
+#define IRQ_GPIO_H3600_ACTION_BUTTON    IRQ_GPIO18
+#define IRQ_GPIO_H3600_OPT_DET		IRQ_GPIO27
+
+#define IRQ_GPIO_H3800_MMC_INT          IRQ_GPIO18
+#define IRQ_GPIO_H3800_NOPT_IND         IRQ_GPIO20 /* almost same as OPT_DET */
+
+/* H3100 / 3600 EGPIO pins */
+#define EGPIO_H3600_VPP_ON		(1 << 0)
+#define EGPIO_H3600_CARD_RESET		(1 << 1)   /* reset the attached pcmcia/compactflash card.  active high. */
+#define EGPIO_H3600_OPT_RESET		(1 << 2)   /* reset the attached option pack.  active high. */
+#define EGPIO_H3600_CODEC_NRESET	(1 << 3)   /* reset the onboard UDA1341.  active low. */
+#define EGPIO_H3600_OPT_NVRAM_ON	(1 << 4)   /* apply power to optionpack nvram, active high. */
+#define EGPIO_H3600_OPT_ON		(1 << 5)   /* full power to option pack.  active high. */
+#define EGPIO_H3600_LCD_ON		(1 << 6)   /* enable 3.3V to LCD.  active high. */
+#define EGPIO_H3600_RS232_ON		(1 << 7)   /* UART3 transceiver force on.  Active high. */
+
+/* H3600 only EGPIO pins */
+#define EGPIO_H3600_LCD_PCI		(1 << 8)   /* LCD control IC enable.  active high. */
+#define EGPIO_H3600_IR_ON		(1 << 9)   /* apply power to IR module.  active high. */
+#define EGPIO_H3600_AUD_AMP_ON		(1 << 10)  /* apply power to audio power amp.  active high. */
+#define EGPIO_H3600_AUD_PWR_ON		(1 << 11)  /* apply power to reset of audio circuit.  active high. */
+#define EGPIO_H3600_QMUTE		(1 << 12)  /* mute control for onboard UDA1341.  active high. */
+#define EGPIO_H3600_IR_FSEL		(1 << 13)  /* IR speed select: 1->fast, 0->slow */
+#define EGPIO_H3600_LCD_5V_ON		(1 << 14)  /* enable 5V to LCD. active high. */
+#define EGPIO_H3600_LVDD_ON		(1 << 15)  /* enable 9V and -6.5V to LCD. */
+
+/********************* H3800, ASIC #2 ********************/
+
+#define _H3800_ASIC2_Base            (H3600_EGPIO_VIRT)
+#define H3800_ASIC2_OFFSET(s,x,y)    \
+    (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
+#define H3800_ASIC2_NOFFSET(s,x,n,y) \
+    (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC2_ ## x ## _ ## n ## _Base + _H3800_ASIC2_ ## x ## _ ## y)))
+
+#define _H3800_ASIC2_GPIO_Base                 0x0000
+#define _H3800_ASIC2_GPIO_Direction            0x0000    /* R/W, 16 bits 1:input, 0:output */
+#define _H3800_ASIC2_GPIO_InterruptType        0x0004    /* R/W, 12 bits 1:edge, 0:level          */
+#define _H3800_ASIC2_GPIO_InterruptEdgeType    0x0008    /* R/W, 12 bits 1:rising, 0:falling */
+#define _H3800_ASIC2_GPIO_InterruptLevelType   0x000C    /* R/W, 12 bits 1:high, 0:low  */
+#define _H3800_ASIC2_GPIO_InterruptClear       0x0010    /* W,   12 bits */
+#define _H3800_ASIC2_GPIO_InterruptFlag        0x0010    /* R,   12 bits - reads int status */
+#define _H3800_ASIC2_GPIO_Data                 0x0014    /* R/W, 16 bits */
+#define _H3800_ASIC2_GPIO_BattFaultOut         0x0018    /* R/W, 16 bit - sets level on batt fault */
+#define _H3800_ASIC2_GPIO_InterruptEnable      0x001c    /* R/W, 12 bits 1:enable interrupt */
+#define _H3800_ASIC2_GPIO_Alternate            0x003c    /* R/W, 12+1 bits - set alternate functions */
+
+#define H3800_ASIC2_GPIO_Direction          H3800_ASIC2_OFFSET( u16, GPIO, Direction )
+#define H3800_ASIC2_GPIO_InterruptType      H3800_ASIC2_OFFSET( u16, GPIO, InterruptType )
+#define H3800_ASIC2_GPIO_InterruptEdgeType  H3800_ASIC2_OFFSET( u16, GPIO, InterruptEdgeType )
+#define H3800_ASIC2_GPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, GPIO, InterruptLevelType )
+#define H3800_ASIC2_GPIO_InterruptClear     H3800_ASIC2_OFFSET( u16, GPIO, InterruptClear )
+#define H3800_ASIC2_GPIO_InterruptFlag      H3800_ASIC2_OFFSET( u16, GPIO, InterruptFlag )
+#define H3800_ASIC2_GPIO_Data               H3800_ASIC2_OFFSET( u16, GPIO, Data )
+#define H3800_ASIC2_GPIO_BattFaultOut       H3800_ASIC2_OFFSET( u16, GPIO, BattFaultOut )
+#define H3800_ASIC2_GPIO_InterruptEnable    H3800_ASIC2_OFFSET( u16, GPIO, InterruptEnable )
+#define H3800_ASIC2_GPIO_Alternate          H3800_ASIC2_OFFSET( u16, GPIO, Alternate )
+
+#define GPIO_H3800_ASIC2_IN_Y1_N          (1 << 0)   /* Output: Touchscreen Y1 */
+#define GPIO_H3800_ASIC2_IN_X0            (1 << 1)   /* Output: Touchscreen X0 */
+#define GPIO_H3800_ASIC2_IN_Y0            (1 << 2)   /* Output: Touchscreen Y0 */
+#define GPIO_H3800_ASIC2_IN_X1_N          (1 << 3)   /* Output: Touchscreen X1 */
+#define GPIO_H3800_ASIC2_BT_RST           (1 << 4)   /* Output: Bluetooth reset */
+#define GPIO_H3800_ASIC2_PEN_IRQ          (1 << 5)   /* Input : Pen down        */
+#define GPIO_H3800_ASIC2_SD_DETECT        (1 << 6)   /* Input : SD detect */
+#define GPIO_H3800_ASIC2_EAR_IN_N         (1 << 7)   /* Input : Audio jack plug inserted */
+#define GPIO_H3800_ASIC2_OPT_PCM_RESET    (1 << 8)   /* Output: */
+#define GPIO_H3800_ASIC2_OPT_RESET        (1 << 9)   /* Output: */
+#define GPIO_H3800_ASIC2_USB_DETECT_N     (1 << 10)  /* Input : */
+#define GPIO_H3800_ASIC2_SD_CON_SLT       (1 << 11)  /* Input : */
+
+#define _H3800_ASIC2_KPIO_Base                 0x0200
+#define _H3800_ASIC2_KPIO_Direction            0x0000    /* R/W, 12 bits 1:input, 0:output */
+#define _H3800_ASIC2_KPIO_InterruptType        0x0004    /* R/W, 12 bits 1:edge, 0:level          */
+#define _H3800_ASIC2_KPIO_InterruptEdgeType    0x0008    /* R/W, 12 bits 1:rising, 0:falling */
+#define _H3800_ASIC2_KPIO_InterruptLevelType   0x000C    /* R/W, 12 bits 1:high, 0:low  */
+#define _H3800_ASIC2_KPIO_InterruptClear       0x0010    /* W,   20 bits - 8 special */
+#define _H3800_ASIC2_KPIO_InterruptFlag        0x0010    /* R,   20 bits - 8 special - reads int status */
+#define _H3800_ASIC2_KPIO_Data                 0x0014    /* R/W, 16 bits */
+#define _H3800_ASIC2_KPIO_BattFaultOut         0x0018    /* R/W, 16 bit - sets level on batt fault */
+#define _H3800_ASIC2_KPIO_InterruptEnable      0x001c    /* R/W, 20 bits - 8 special */
+#define _H3800_ASIC2_KPIO_Alternate            0x003c    /* R/W, 6 bits */
+
+#define H3800_ASIC2_KPIO_Direction          H3800_ASIC2_OFFSET( u16, KPIO, Direction )
+#define H3800_ASIC2_KPIO_InterruptType      H3800_ASIC2_OFFSET( u16, KPIO, InterruptType )
+#define H3800_ASIC2_KPIO_InterruptEdgeType  H3800_ASIC2_OFFSET( u16, KPIO, InterruptEdgeType )
+#define H3800_ASIC2_KPIO_InterruptLevelType H3800_ASIC2_OFFSET( u16, KPIO, InterruptLevelType )
+#define H3800_ASIC2_KPIO_InterruptClear     H3800_ASIC2_OFFSET( u32, KPIO, InterruptClear )
+#define H3800_ASIC2_KPIO_InterruptFlag      H3800_ASIC2_OFFSET( u32, KPIO, InterruptFlag )
+#define H3800_ASIC2_KPIO_Data               H3800_ASIC2_OFFSET( u16, KPIO, Data )
+#define H3800_ASIC2_KPIO_BattFaultOut       H3800_ASIC2_OFFSET( u16, KPIO, BattFaultOut )
+#define H3800_ASIC2_KPIO_InterruptEnable    H3800_ASIC2_OFFSET( u32, KPIO, InterruptEnable )
+#define H3800_ASIC2_KPIO_Alternate          H3800_ASIC2_OFFSET( u16, KPIO, Alternate )
+
+#define H3800_ASIC2_KPIO_SPI_INT        ( 1 << 16 )
+#define H3800_ASIC2_KPIO_OWM_INT        ( 1 << 17 )
+#define H3800_ASIC2_KPIO_ADC_INT        ( 1 << 18 )
+#define H3800_ASIC2_KPIO_UART_0_INT     ( 1 << 19 )
+#define H3800_ASIC2_KPIO_UART_1_INT     ( 1 << 20 )
+#define H3800_ASIC2_KPIO_TIMER_0_INT    ( 1 << 21 )
+#define H3800_ASIC2_KPIO_TIMER_1_INT    ( 1 << 22 )
+#define H3800_ASIC2_KPIO_TIMER_2_INT    ( 1 << 23 )
+
+#define KPIO_H3800_ASIC2_RECORD_BTN_N     (1 << 0)   /* Record button */
+#define KPIO_H3800_ASIC2_KEY_5W1_N        (1 << 1)   /* Keypad */
+#define KPIO_H3800_ASIC2_KEY_5W2_N        (1 << 2)   /* */
+#define KPIO_H3800_ASIC2_KEY_5W3_N        (1 << 3)   /* */
+#define KPIO_H3800_ASIC2_KEY_5W4_N        (1 << 4)   /* */
+#define KPIO_H3800_ASIC2_KEY_5W5_N        (1 << 5)   /* */
+#define KPIO_H3800_ASIC2_KEY_LEFT_N       (1 << 6)   /* */
+#define KPIO_H3800_ASIC2_KEY_RIGHT_N      (1 << 7)   /* */
+#define KPIO_H3800_ASIC2_KEY_AP1_N        (1 << 8)   /* Old "Calendar" */
+#define KPIO_H3800_ASIC2_KEY_AP2_N        (1 << 9)   /* Old "Schedule" */
+#define KPIO_H3800_ASIC2_KEY_AP3_N        (1 << 10)  /* Old "Q"        */
+#define KPIO_H3800_ASIC2_KEY_AP4_N        (1 << 11)  /* Old "Undo"     */
+
+/* Alternate KPIO functions (set by default) */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W1_N        (1 << 1)   /* Action key */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W2_N        (1 << 2)   /* J1 of keypad input */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W3_N        (1 << 3)   /* J2 of keypad input */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W4_N        (1 << 4)   /* J3 of keypad input */
+#define KPIO_ALT_H3800_ASIC2_KEY_5W5_N        (1 << 5)   /* J4 of keypad input */
+
+#define _H3800_ASIC2_SPI_Base                  0x0400
+#define _H3800_ASIC2_SPI_Control               0x0000    /* R/W 8 bits */
+#define _H3800_ASIC2_SPI_Data                  0x0004    /* R/W 8 bits */
+#define _H3800_ASIC2_SPI_ChipSelectDisabled    0x0008    /* W   8 bits */
+
+#define H3800_ASIC2_SPI_Control             H3800_ASIC2_OFFSET( u8, SPI, Control )
+#define H3800_ASIC2_SPI_Data                H3800_ASIC2_OFFSET( u8, SPI, Data )
+#define H3800_ASIC2_SPI_ChipSelectDisabled  H3800_ASIC2_OFFSET( u8, SPI, ChipSelectDisabled )
+
+#define _H3800_ASIC2_PWM_0_Base                0x0600
+#define _H3800_ASIC2_PWM_1_Base                0x0700
+#define _H3800_ASIC2_PWM_TimeBase              0x0000    /* R/W 6 bits */
+#define _H3800_ASIC2_PWM_PeriodTime            0x0004    /* R/W 12 bits */
+#define _H3800_ASIC2_PWM_DutyTime              0x0008    /* R/W 12 bits */
+
+#define H3800_ASIC2_PWM_0_TimeBase          H3800_ASIC2_NOFFSET(  u8, PWM, 0, TimeBase )
+#define H3800_ASIC2_PWM_0_PeriodTime        H3800_ASIC2_NOFFSET( u16, PWM, 0, PeriodTime )
+#define H3800_ASIC2_PWM_0_DutyTime          H3800_ASIC2_NOFFSET( u16, PWM, 0, DutyTime )
+
+#define H3800_ASIC2_PWM_1_TimeBase          H3800_ASIC2_NOFFSET(  u8, PWM, 1, TimeBase )
+#define H3800_ASIC2_PWM_1_PeriodTime        H3800_ASIC2_NOFFSET( u16, PWM, 1, PeriodTime )
+#define H3800_ASIC2_PWM_1_DutyTime          H3800_ASIC2_NOFFSET( u16, PWM, 1, DutyTime )
+
+#define H3800_ASIC2_PWM_TIMEBASE_MASK             0xf    /* Low 4 bits sets time base, max = 8 */
+#define H3800_ASIC2_PWM_TIMEBASE_ENABLE    ( 1 << 4 )    /* Enable clock */
+#define H3800_ASIC2_PWM_TIMEBASE_CLEAR     ( 1 << 5 )    /* Clear the PWM */
+
+#define _H3800_ASIC2_LED_0_Base                0x0800
+#define _H3800_ASIC2_LED_1_Base                0x0880
+#define _H3800_ASIC2_LED_2_Base                0x0900
+#define _H3800_ASIC2_LED_TimeBase              0x0000    /* R/W  7 bits */
+#define _H3800_ASIC2_LED_PeriodTime            0x0004    /* R/W 12 bits */
+#define _H3800_ASIC2_LED_DutyTime              0x0008    /* R/W 12 bits */
+#define _H3800_ASIC2_LED_AutoStopCount         0x000c    /* R/W 16 bits */
+
+#define H3800_ASIC2_LED_0_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 0, TimeBase )
+#define H3800_ASIC2_LED_0_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 0, PeriodTime )
+#define H3800_ASIC2_LED_0_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 0, DutyTime )
+#define H3800_ASIC2_LED_0_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 0, AutoStopClock )
+
+#define H3800_ASIC2_LED_1_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 1, TimeBase )
+#define H3800_ASIC2_LED_1_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 1, PeriodTime )
+#define H3800_ASIC2_LED_1_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 1, DutyTime )
+#define H3800_ASIC2_LED_1_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 1, AutoStopClock )
+
+#define H3800_ASIC2_LED_2_TimeBase          H3800_ASIC2_NOFFSET(  u8, LED, 2, TimeBase )
+#define H3800_ASIC2_LED_2_PeriodTime        H3800_ASIC2_NOFFSET( u16, LED, 2, PeriodTime )
+#define H3800_ASIC2_LED_2_DutyTime          H3800_ASIC2_NOFFSET( u16, LED, 2, DutyTime )
+#define H3800_ASIC2_LED_2_AutoStopClock     H3800_ASIC2_NOFFSET( u16, LED, 2, AutoStopClock )
+
+#define H3800_ASIC2_LED_TIMEBASE_MASK            0x0f    /* Low 4 bits sets time base, max = 13 */
+#define H3800_ASIC2_LED_TIMEBASE_BLINK     ( 1 << 4 )    /* Enable blinking */
+#define H3800_ASIC2_LED_TIMEBASE_AUTOSTOP  ( 1 << 5 )
+#define H3800_ASIC2_LED_TIMEBASE_ALWAYS    ( 1 << 6 )    /* Enable blink always */
+
+#define _H3800_ASIC2_UART_0_Base               0x0A00
+#define _H3800_ASIC2_UART_1_Base               0x0C00
+#define _H3800_ASIC2_UART_Receive              0x0000    /* R    8 bits */
+#define _H3800_ASIC2_UART_Transmit             0x0000    /*   W  8 bits */
+#define _H3800_ASIC2_UART_IntEnable            0x0004    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_IntVerify            0x0008    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_FIFOControl          0x000c    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_LineControl          0x0010    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_ModemStatus          0x0014    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_LineStatus           0x0018    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_ScratchPad           0x001c    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_DivisorLatchL        0x0020    /* R/W  8 bits */
+#define _H3800_ASIC2_UART_DivisorLatchH        0x0024    /* R/W  8 bits */
+
+#define H3800_ASIC2_UART_0_Receive          H3800_ASIC2_NOFFSET(  u8, UART, 0, Receive )
+#define H3800_ASIC2_UART_0_Transmit         H3800_ASIC2_NOFFSET(  u8, UART, 0, Transmit )
+#define H3800_ASIC2_UART_0_IntEnable        H3800_ASIC2_NOFFSET(  u8, UART, 0, IntEnable )
+#define H3800_ASIC2_UART_0_IntVerify        H3800_ASIC2_NOFFSET(  u8, UART, 0, IntVerify )
+#define H3800_ASIC2_UART_0_FIFOControl      H3800_ASIC2_NOFFSET(  u8, UART, 0, FIFOControl )
+#define H3800_ASIC2_UART_0_LineControl      H3800_ASIC2_NOFFSET(  u8, UART, 0, LineControl )
+#define H3800_ASIC2_UART_0_ModemStatus      H3800_ASIC2_NOFFSET(  u8, UART, 0, ModemStatus )
+#define H3800_ASIC2_UART_0_LineStatus       H3800_ASIC2_NOFFSET(  u8, UART, 0, LineStatus )
+#define H3800_ASIC2_UART_0_ScratchPad       H3800_ASIC2_NOFFSET(  u8, UART, 0, ScratchPad )
+#define H3800_ASIC2_UART_0_DivisorLatchL    H3800_ASIC2_NOFFSET(  u8, UART, 0, DivisorLatchL )
+#define H3800_ASIC2_UART_0_DivisorLatchH    H3800_ASIC2_NOFFSET(  u8, UART, 0, DivisorLatchH )
+
+#define H3800_ASIC2_UART_1_Receive          H3800_ASIC2_NOFFSET(  u8, UART, 1, Receive )
+#define H3800_ASIC2_UART_1_Transmit         H3800_ASIC2_NOFFSET(  u8, UART, 1, Transmit )
+#define H3800_ASIC2_UART_1_IntEnable        H3800_ASIC2_NOFFSET(  u8, UART, 1, IntEnable )
+#define H3800_ASIC2_UART_1_IntVerify        H3800_ASIC2_NOFFSET(  u8, UART, 1, IntVerify )
+#define H3800_ASIC2_UART_1_FIFOControl      H3800_ASIC2_NOFFSET(  u8, UART, 1, FIFOControl )
+#define H3800_ASIC2_UART_1_LineControl      H3800_ASIC2_NOFFSET(  u8, UART, 1, LineControl )
+#define H3800_ASIC2_UART_1_ModemStatus      H3800_ASIC2_NOFFSET(  u8, UART, 1, ModemStatus )
+#define H3800_ASIC2_UART_1_LineStatus       H3800_ASIC2_NOFFSET(  u8, UART, 1, LineStatus )
+#define H3800_ASIC2_UART_1_ScratchPad       H3800_ASIC2_NOFFSET(  u8, UART, 1, ScratchPad )
+#define H3800_ASIC2_UART_1_DivisorLatchL    H3800_ASIC2_NOFFSET(  u8, UART, 1, DivisorLatchL )
+#define H3800_ASIC2_UART_1_DivisorLatchH    H3800_ASIC2_NOFFSET(  u8, UART, 1, DivisorLatchH )
+
+#define _H3800_ASIC2_TIMER_Base                0x0E00
+#define _H3800_ASIC2_TIMER_Command             0x0000    /* R/W  8 bits */
+
+#define H3800_ASIC2_TIMER_Command           H3800_ASIC2_OFFSET( u8, Timer, Command )
+
+#define H3800_ASIC2_TIMER_GAT_0            ( 1 << 0 )    /* Gate enable, counter 0 */
+#define H3800_ASIC2_TIMER_GAT_1            ( 1 << 1 )    /* Gate enable, counter 1 */
+#define H3800_ASIC2_TIMER_GAT_2            ( 1 << 2 )    /* Gate enable, counter 2 */
+#define H3800_ASIC2_TIMER_CLK_0            ( 1 << 3 )    /* Clock enable, counter 0 */
+#define H3800_ASIC2_TIMER_CLK_1            ( 1 << 4 )    /* Clock enable, counter 1 */
+#define H3800_ASIC2_TIMER_CLK_2            ( 1 << 5 )    /* Clock enable, counter 2 */
+#define H3800_ASIC2_TIMER_MODE_0           ( 1 << 6 )    /* Mode 0 enable, counter 0 */
+#define H3800_ASIC2_TIMER_MODE_1           ( 1 << 7 )    /* Mode 0 enable, counter 1 */
+
+#define _H3800_ASIC2_CLOCK_Base                0x1000
+#define _H3800_ASIC2_CLOCK_Enable              0x0000    /* R/W  18 bits */
+
+#define H3800_ASIC2_CLOCK_Enable            H3800_ASIC2_OFFSET( u32, CLOCK, Enable )
+
+#define H3800_ASIC2_CLOCK_AUDIO_1              0x0001    /* Enable 4.1 MHz clock for 8Khz and 4khz sample rate */
+#define H3800_ASIC2_CLOCK_AUDIO_2              0x0002    /* Enable 12.3 MHz clock for 48Khz and 32khz sample rate */
+#define H3800_ASIC2_CLOCK_AUDIO_3              0x0004    /* Enable 5.6 MHz clock for 11 kHZ sample rate */
+#define H3800_ASIC2_CLOCK_AUDIO_4              0x0008    /* Enable 11.289 MHz clock for 44 and 22 kHz sample rate */
+#define H3800_ASIC2_CLOCK_ADC              ( 1 << 4 )    /* 1.024 MHz clock to ADC */
+#define H3800_ASIC2_CLOCK_SPI              ( 1 << 5 )    /* 4.096 MHz clock to SPI */
+#define H3800_ASIC2_CLOCK_OWM              ( 1 << 6 )    /* 4.096 MHz clock to OWM */
+#define H3800_ASIC2_CLOCK_PWM              ( 1 << 7 )    /* 2.048 MHz clock to PWM */
+#define H3800_ASIC2_CLOCK_UART_1           ( 1 << 8 )    /* 24.576 MHz clock to UART1 (turn off bit 16) */
+#define H3800_ASIC2_CLOCK_UART_0           ( 1 << 9 )    /* 24.576 MHz clock to UART0 (turn off bit 17) */
+#define H3800_ASIC2_CLOCK_SD_1             ( 1 << 10 )   /* 16.934 MHz to SD */
+#define H3800_ASIC2_CLOCK_SD_2             ( 2 << 10 )   /* 24.576 MHz to SD */
+#define H3800_ASIC2_CLOCK_SD_3             ( 3 << 10 )   /* 33.869 MHz to SD */
+#define H3800_ASIC2_CLOCK_SD_4             ( 4 << 10 )   /* 49.152 MHz to SD */
+#define H3800_ASIC2_CLOCK_EX0              ( 1 << 13 )   /* Enable 32.768 kHz crystal */
+#define H3800_ASIC2_CLOCK_EX1              ( 1 << 14 )   /* Enable 24.576 MHz crystal */
+#define H3800_ASIC2_CLOCK_EX2              ( 1 << 15 )   /* Enable 33.869 MHz crystal */
+#define H3800_ASIC2_CLOCK_SLOW_UART_1      ( 1 << 16 )   /* Enable 3.686 MHz to UART1 (turn off bit 8) */
+#define H3800_ASIC2_CLOCK_SLOW_UART_0      ( 1 << 17 )   /* Enable 3.686 MHz to UART0 (turn off bit 9) */
+
+#define _H3800_ASIC2_ADC_Base                  0x1200
+#define _H3800_ASIC2_ADC_Multiplexer           0x0000    /* R/W 4 bits - low 3 bits set channel */
+#define _H3800_ASIC2_ADC_ControlStatus         0x0004    /* R/W 8 bits */
+#define _H3800_ASIC2_ADC_Data                  0x0008    /* R   10 bits */
+
+#define H3800_ASIC2_ADC_Multiplexer       H3800_ASIC2_OFFSET(  u8, ADC, Multiplexer )
+#define H3800_ASIC2_ADC_ControlStatus     H3800_ASIC2_OFFSET(  u8, ADC, ControlStatus )
+#define H3800_ASIC2_ADC_Data              H3800_ASIC2_OFFSET( u16, ADC, Data )
+
+#define H3600_ASIC2_ADC_MUX_CHANNEL_MASK         0x07    /* Low 3 bits sets channel.  max = 4 */
+#define H3600_ASIC2_ADC_MUX_CLKEN          ( 1 << 3 )    /* Enable clock */
+
+#define H3600_ASIC2_ADC_CSR_ADPS_MASK            0x0f    /* Low 4 bits sets prescale, max = 8 */
+#define H3600_ASIC2_ADC_CSR_FREE_RUN       ( 1 << 4 )
+#define H3600_ASIC2_ADC_CSR_INT_ENABLE     ( 1 << 5 )
+#define H3600_ASIC2_ADC_CSR_START          ( 1 << 6 )    /* Set to start conversion.  Goes to 0 when done */
+#define H3600_ASIC2_ADC_CSR_ENABLE         ( 1 << 7 )    /* 1:power up ADC, 0:power down */
+
+
+#define _H3800_ASIC2_INTR_Base                 0x1600
+#define _H3800_ASIC2_INTR_MaskAndFlag          0x0000    /* R/(W) 8bits */
+#define _H3800_ASIC2_INTR_ClockPrescale        0x0004    /* R/(W) 5bits */
+#define _H3800_ASIC2_INTR_TimerSet             0x0008    /* R/(W) 8bits */
+
+#define H3800_ASIC2_INTR_MaskAndFlag      H3800_ASIC2_OFFSET( u8, INTR, MaskAndFlag )
+#define H3800_ASIC2_INTR_ClockPrescale    H3800_ASIC2_OFFSET( u8, INTR, ClockPrescale )
+#define H3800_ASIC2_INTR_TimerSet         H3800_ASIC2_OFFSET( u8, INTR, TimerSet )
+
+#define H3800_ASIC2_INTR_GLOBAL_MASK       ( 1 << 0 )    /* Global interrupt mask */
+#define H3800_ASIC2_INTR_POWER_ON_RESET    ( 1 << 1 )    /* 01: Power on reset (bits 1 & 2 ) */
+#define H3800_ASIC2_INTR_EXTERNAL_RESET    ( 2 << 1 )    /* 10: External reset (bits 1 & 2 ) */
+#define H3800_ASIC2_INTR_MASK_UART_0       ( 1 << 4 )
+#define H3800_ASIC2_INTR_MASK_UART_1       ( 1 << 5 )
+#define H3800_ASIC2_INTR_MASK_TIMER        ( 1 << 6 )
+#define H3800_ASIC2_INTR_MASK_OWM          ( 1 << 7 )
+
+#define H3800_ASIC2_INTR_CLOCK_PRESCALE          0x0f    /* 4 bits, max 14 */
+#define H3800_ASIC2_INTR_SET               ( 1 << 4 )    /* Time base enable */
+
+
+#define _H3800_ASIC2_OWM_Base                  0x1800
+#define _H3800_ASIC2_OWM_Command               0x0000    /* R/W 4 bits command register */
+#define _H3800_ASIC2_OWM_Data                  0x0004    /* R/W 8 bits, transmit / receive buffer */
+#define _H3800_ASIC2_OWM_Interrupt             0x0008    /* R/W Command register */
+#define _H3800_ASIC2_OWM_InterruptEnable       0x000c    /* R/W Command register */
+#define _H3800_ASIC2_OWM_ClockDivisor          0x0010    /* R/W 5 bits of divisor and pre-scale */
+
+#define H3800_ASIC2_OWM_Command            H3800_ASIC2_OFFSET( u8, OWM, Command )
+#define H3800_ASIC2_OWM_Data               H3800_ASIC2_OFFSET( u8, OWM, Data )
+#define H3800_ASIC2_OWM_Interrupt          H3800_ASIC2_OFFSET( u8, OWM, Interrupt )
+#define H3800_ASIC2_OWM_InterruptEnable    H3800_ASIC2_OFFSET( u8, OWM, InterruptEnable )
+#define H3800_ASIC2_OWM_ClockDivisor       H3800_ASIC2_OFFSET( u8, OWM, ClockDivisor )
+
+#define H3800_ASIC2_OWM_CMD_ONE_WIRE_RESET ( 1 << 0 )    /* Set to force reset on 1-wire bus */
+#define H3800_ASIC2_OWM_CMD_SRA            ( 1 << 1 )    /* Set to switch to Search ROM accelerator mode */
+#define H3800_ASIC2_OWM_CMD_DQ_OUTPUT      ( 1 << 2 )    /* Write only - forces bus low */
+#define H3800_ASIC2_OWM_CMD_DQ_INPUT       ( 1 << 3 )    /* Read only - reflects state of bus */
+
+#define H3800_ASIC2_OWM_INT_PD             ( 1 << 0 )    /* Presence detect */
+#define H3800_ASIC2_OWM_INT_PDR            ( 1 << 1 )    /* Presence detect result */
+#define H3800_ASIC2_OWM_INT_TBE            ( 1 << 2 )    /* Transmit buffer empty */
+#define H3800_ASIC2_OWM_INT_TEMT           ( 1 << 3 )    /* Transmit shift register empty */
+#define H3800_ASIC2_OWM_INT_RBF            ( 1 << 4 )    /* Receive buffer full */
+
+#define H3800_ASIC2_OWM_INTEN_EPD          ( 1 << 0 )    /* Enable receive buffer full interrupt */
+#define H3800_ASIC2_OWM_INTEN_IAS          ( 1 << 1 )    /* Enable transmit shift register empty interrupt */
+#define H3800_ASIC2_OWM_INTEN_ETBE         ( 1 << 2 )    /* Enable transmit buffer empty interrupt */
+#define H3800_ASIC2_OWM_INTEN_ETMT         ( 1 << 3 )    /* INTR active state */
+#define H3800_ASIC2_OWM_INTEN_ERBF         ( 1 << 4 )    /* Enable presence detect interrupt */
+
+#define _H3800_ASIC2_FlashCtl_Base             0x1A00
+
+/****************************************************/
+/* H3800, ASIC #1
+ * This ASIC is accesed through ASIC #2, and
+ * mapped into the 1c00 - 1f00 region
+ */
+
+#define H3800_ASIC1_OFFSET(s,x,y)   \
+     (*((volatile s *) (_H3800_ASIC2_Base + _H3800_ASIC1_ ## x ## _Base + (_H3800_ASIC1_ ## x ## _ ## y << 1))))
+
+#define _H3800_ASIC1_MMC_Base             0x1c00
+
+#define _H3800_ASIC1_MMC_StartStopClock     0x00    /* R/W 8bit                                  */
+#define _H3800_ASIC1_MMC_Status             0x02    /* R   See below, default 0x0040             */
+#define _H3800_ASIC1_MMC_ClockRate          0x04    /* R/W 8bit, low 3 bits are clock divisor    */
+#define _H3800_ASIC1_MMC_SPIRegister        0x08    /* R/W 8bit, see below                       */
+#define _H3800_ASIC1_MMC_CmdDataCont        0x0a    /* R/W 8bit, write to start MMC adapter      */
+#define _H3800_ASIC1_MMC_ResponseTimeout    0x0c    /* R/W 8bit, clocks before response timeout  */
+#define _H3800_ASIC1_MMC_ReadTimeout        0x0e    /* R/W 16bit, clocks before received data timeout */
+#define _H3800_ASIC1_MMC_BlockLength        0x10    /* R/W 10bit */
+#define _H3800_ASIC1_MMC_NumOfBlocks        0x12    /* R/W 16bit, in block mode, number of blocks  */
+#define _H3800_ASIC1_MMC_InterruptMask      0x1a    /* R/W 8bit */
+#define _H3800_ASIC1_MMC_CommandNumber      0x1c    /* R/W 6 bits */
+#define _H3800_ASIC1_MMC_ArgumentH          0x1e    /* R/W 16 bits  */
+#define _H3800_ASIC1_MMC_ArgumentL          0x20    /* R/W 16 bits */
+#define _H3800_ASIC1_MMC_ResFifo            0x22    /* R   8 x 16 bits - contains response FIFO */
+#define _H3800_ASIC1_MMC_BufferPartFull     0x28    /* R/W 8 bits */
+
+#define H3800_ASIC1_MMC_StartStopClock    H3800_ASIC1_OFFSET(  u8, MMC, StartStopClock )
+#define H3800_ASIC1_MMC_Status            H3800_ASIC1_OFFSET( u16, MMC, Status )
+#define H3800_ASIC1_MMC_ClockRate         H3800_ASIC1_OFFSET(  u8, MMC, ClockRate )
+#define H3800_ASIC1_MMC_SPIRegister       H3800_ASIC1_OFFSET(  u8, MMC, SPIRegister )
+#define H3800_ASIC1_MMC_CmdDataCont       H3800_ASIC1_OFFSET(  u8, MMC, CmdDataCont )
+#define H3800_ASIC1_MMC_ResponseTimeout   H3800_ASIC1_OFFSET(  u8, MMC, ResponseTimeout )
+#define H3800_ASIC1_MMC_ReadTimeout       H3800_ASIC1_OFFSET( u16, MMC, ReadTimeout )
+#define H3800_ASIC1_MMC_BlockLength       H3800_ASIC1_OFFSET( u16, MMC, BlockLength )
+#define H3800_ASIC1_MMC_NumOfBlocks       H3800_ASIC1_OFFSET( u16, MMC, NumOfBlocks )
+#define H3800_ASIC1_MMC_InterruptMask     H3800_ASIC1_OFFSET(  u8, MMC, InterruptMask )
+#define H3800_ASIC1_MMC_CommandNumber     H3800_ASIC1_OFFSET(  u8, MMC, CommandNumber )
+#define H3800_ASIC1_MMC_ArgumentH         H3800_ASIC1_OFFSET( u16, MMC, ArgumentH )
+#define H3800_ASIC1_MMC_ArgumentL         H3800_ASIC1_OFFSET( u16, MMC, ArgumentL )
+#define H3800_ASIC1_MMC_ResFifo           H3800_ASIC1_OFFSET( u16, MMC, ResFifo )
+#define H3800_ASIC1_MMC_BufferPartFull    H3800_ASIC1_OFFSET(  u8, MMC, BufferPartFull )
+
+#define H3800_ASIC1_MMC_STOP_CLOCK                   (1 << 0)   /* Write to "StartStopClock" register */
+#define H3800_ASIC1_MMC_START_CLOCK                  (1 << 1)
+
+#define H3800_ASIC1_MMC_STATUS_READ_TIMEOUT          (1 << 0)
+#define H3800_ASIC1_MMC_STATUS_RESPONSE_TIMEOUT      (1 << 1)
+#define H3800_ASIC1_MMC_STATUS_CRC_WRITE_ERROR       (1 << 2)
+#define H3800_ASIC1_MMC_STATUS_CRC_READ_ERROR        (1 << 3)
+#define H3800_ASIC1_MMC_STATUS_SPI_READ_ERROR        (1 << 4)  /* SPI data token error received */
+#define H3800_ASIC1_MMC_STATUS_CRC_RESPONSE_ERROR    (1 << 5)
+#define H3800_ASIC1_MMC_STATUS_FIFO_EMPTY            (1 << 6)
+#define H3800_ASIC1_MMC_STATUS_FIFO_FULL             (1 << 7)
+#define H3800_ASIC1_MMC_STATUS_CLOCK_ENABLE          (1 << 8)  /* MultiMediaCard clock stopped */
+#define H3800_ASIC1_MMC_STATUS_DATA_TRANSFER_DONE    (1 << 11) /* Write operation, indicates transfer finished */
+#define H3800_ASIC1_MMC_STATUS_END_PROGRAM           (1 << 12) /* End write and read operations */
+#define H3800_ASIC1_MMC_STATUS_END_COMMAND_RESPONSE  (1 << 13) /* End command response */
+
+#define H3800_ASIC1_MMC_SPI_REG_SPI_ENABLE           (1 << 0)  /* Enables SPI mode */
+#define H3800_ASIC1_MMC_SPI_REG_CRC_ON               (1 << 1)  /* 1:turn on CRC    */
+#define H3800_ASIC1_MMC_SPI_REG_SPI_CS_ENABLE        (1 << 2)  /* 1:turn on SPI CS */
+#define H3800_ASIC1_MMC_SPI_REG_CS_ADDRESS_MASK      0x38      /* Bits 3,4,5 are the SPI CS relative address */
+
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_NO_RESPONSE  0x00
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R1           0x01
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R2           0x02
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_FORMAT_R3           0x03
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_DATA_ENABLE         (1 << 2)  /* This command contains a data transfer */
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_WRITE               (1 << 3)  /* This data transfer is a write */
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_STREAM_MODE         (1 << 4)  /* This data transfer is in stream mode */
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_BUSY_BIT            (1 << 5)  /* Busy signal expected after current cmd */
+#define H3800_ASIC1_MMC_CMD_DATA_CONT_INITIALIZE          (1 << 6)  /* Enables the 80 bits for initializing card */
+
+#define H3800_ASIC1_MMC_INT_MASK_DATA_TRANSFER_DONE       (1 << 0)
+#define H3800_ASIC1_MMC_INT_MASK_PROGRAM_DONE             (1 << 1)
+#define H3800_ASIC1_MMC_INT_MASK_END_COMMAND_RESPONSE     (1 << 2)
+#define H3800_ASIC1_MMC_INT_MASK_BUFFER_READY             (1 << 3)
+
+#define H3800_ASIC1_MMC_BUFFER_PART_FULL                  (1 << 0)
+
+/********* GPIO **********/
+
+#define _H3800_ASIC1_GPIO_Base        0x1e00
+
+#define _H3800_ASIC1_GPIO_Mask          0x30    /* R/W 0:don't mask, 1:mask interrupt */
+#define _H3800_ASIC1_GPIO_Direction     0x32    /* R/W 0:input, 1:output              */
+#define _H3800_ASIC1_GPIO_Out           0x34    /* R/W 0:output low, 1:output high    */
+#define _H3800_ASIC1_GPIO_TriggerType   0x36    /* R/W 0:level, 1:edge                */
+#define _H3800_ASIC1_GPIO_EdgeTrigger   0x38    /* R/W 0:falling, 1:rising            */
+#define _H3800_ASIC1_GPIO_LevelTrigger  0x3A    /* R/W 0:low, 1:high level detect     */
+#define _H3800_ASIC1_GPIO_LevelStatus   0x3C    /* R/W 0:none, 1:detect               */
+#define _H3800_ASIC1_GPIO_EdgeStatus    0x3E    /* R/W 0:none, 1:detect               */
+#define _H3800_ASIC1_GPIO_State         0x40    /* R   See masks below  (default 0)         */
+#define _H3800_ASIC1_GPIO_Reset         0x42    /* R/W See masks below  (default 0x04)      */
+#define _H3800_ASIC1_GPIO_SleepMask     0x44    /* R/W 0:don't mask, 1:mask trigger in sleep mode  */
+#define _H3800_ASIC1_GPIO_SleepDir      0x46    /* R/W direction 0:input, 1:output in sleep mode    */
+#define _H3800_ASIC1_GPIO_SleepOut      0x48    /* R/W level 0:low, 1:high in sleep mode           */
+#define _H3800_ASIC1_GPIO_Status        0x4A    /* R   Pin status                                  */
+#define _H3800_ASIC1_GPIO_BattFaultDir  0x4C    /* R/W direction 0:input, 1:output in batt_fault   */
+#define _H3800_ASIC1_GPIO_BattFaultOut  0x4E    /* R/W level 0:low, 1:high in batt_fault           */
+
+#define H3800_ASIC1_GPIO_Mask         H3800_ASIC1_OFFSET( u16, GPIO, Mask )
+#define H3800_ASIC1_GPIO_Direction    H3800_ASIC1_OFFSET( u16, GPIO, Direction )
+#define H3800_ASIC1_GPIO_Out          H3800_ASIC1_OFFSET( u16, GPIO, Out )
+#define H3800_ASIC1_GPIO_TriggerType  H3800_ASIC1_OFFSET( u16, GPIO, TriggerType )
+#define H3800_ASIC1_GPIO_EdgeTrigger  H3800_ASIC1_OFFSET( u16, GPIO, EdgeTrigger )
+#define H3800_ASIC1_GPIO_LevelTrigger H3800_ASIC1_OFFSET( u16, GPIO, LevelTrigger )
+#define H3800_ASIC1_GPIO_LevelStatus  H3800_ASIC1_OFFSET( u16, GPIO, LevelStatus )
+#define H3800_ASIC1_GPIO_EdgeStatus   H3800_ASIC1_OFFSET( u16, GPIO, EdgeStatus )
+#define H3800_ASIC1_GPIO_State        H3800_ASIC1_OFFSET(  u8, GPIO, State )
+#define H3800_ASIC1_GPIO_Reset        H3800_ASIC1_OFFSET(  u8, GPIO, Reset )
+#define H3800_ASIC1_GPIO_SleepMask    H3800_ASIC1_OFFSET( u16, GPIO, SleepMask )
+#define H3800_ASIC1_GPIO_SleepDir     H3800_ASIC1_OFFSET( u16, GPIO, SleepDir )
+#define H3800_ASIC1_GPIO_SleepOut     H3800_ASIC1_OFFSET( u16, GPIO, SleepOut )
+#define H3800_ASIC1_GPIO_Status       H3800_ASIC1_OFFSET( u16, GPIO, Status )
+#define H3800_ASIC1_GPIO_BattFaultDir H3800_ASIC1_OFFSET( u16, GPIO, BattFaultDir )
+#define H3800_ASIC1_GPIO_BattFaultOut H3800_ASIC1_OFFSET( u16, GPIO, BattFaultOut )
+
+#define H3800_ASIC1_GPIO_STATE_MASK            (1 << 0)
+#define H3800_ASIC1_GPIO_STATE_DIRECTION       (1 << 1)
+#define H3800_ASIC1_GPIO_STATE_OUT             (1 << 2)
+#define H3800_ASIC1_GPIO_STATE_TRIGGER_TYPE    (1 << 3)
+#define H3800_ASIC1_GPIO_STATE_EDGE_TRIGGER    (1 << 4)
+#define H3800_ASIC1_GPIO_STATE_LEVEL_TRIGGER   (1 << 5)
+
+#define H3800_ASIC1_GPIO_RESET_SOFTWARE        (1 << 0)
+#define H3800_ASIC1_GPIO_RESET_AUTO_SLEEP      (1 << 1)
+#define H3800_ASIC1_GPIO_RESET_FIRST_PWR_ON    (1 << 2)
+
+/* These are all outputs */
+#define GPIO_H3800_ASIC1_IR_ON_N          (1 << 0)   /* Apply power to the IR Module */
+#define GPIO_H3800_ASIC1_SD_PWR_ON        (1 << 1)   /* Secure Digital power on */
+#define GPIO_H3800_ASIC1_RS232_ON         (1 << 2)   /* Turn on power to the RS232 chip ? */
+#define GPIO_H3800_ASIC1_PULSE_GEN        (1 << 3)   /* Goes to speaker / earphone */
+#define GPIO_H3800_ASIC1_CH_TIMER         (1 << 4)   /* */
+#define GPIO_H3800_ASIC1_LCD_5V_ON        (1 << 5)   /* Enables LCD_5V */
+#define GPIO_H3800_ASIC1_LCD_ON           (1 << 6)   /* Enables LCD_3V */
+#define GPIO_H3800_ASIC1_LCD_PCI          (1 << 7)   /* Connects to PDWN on LCD controller */
+#define GPIO_H3800_ASIC1_VGH_ON           (1 << 8)   /* Drives VGH on the LCD (+9??) */
+#define GPIO_H3800_ASIC1_VGL_ON           (1 << 9)   /* Drivers VGL on the LCD (-6??) */
+#define GPIO_H3800_ASIC1_FL_PWR_ON        (1 << 10)  /* Frontlight power on */
+#define GPIO_H3800_ASIC1_BT_PWR_ON        (1 << 11)  /* Bluetooth power on */
+#define GPIO_H3800_ASIC1_SPK_ON           (1 << 12)  /* */
+#define GPIO_H3800_ASIC1_EAR_ON_N         (1 << 13)  /* */
+#define GPIO_H3800_ASIC1_AUD_PWR_ON       (1 << 14)  /* */
+
+/* Write enable for the flash */
+
+#define _H3800_ASIC1_FlashWP_Base         0x1F00
+#define _H3800_ASIC1_FlashWP_VPP_ON         0x00    /* R   1: write, 0: protect */
+#define H3800_ASIC1_FlashWP_VPP_ON       H3800_ASIC1_OFFSET( u8, FlashWP, VPP_ON )
+
+#endif /* _INCLUDE_H3600_GPIO_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
new file mode 100644
index 000000000000..5976435f42c2
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/hardware.h
+ *
+ * Copyright (C) 1998 Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware definitions for SA1100 architecture
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ *      Definitions for SA1111 added.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+
+#define UNCACHEABLE_ADDR	0xfa050000
+
+
+/*
+ * SA1100 internal I/O mappings
+ *
+ * We have the following mapping:
+ *      phys            virt
+ *      80000000        f8000000
+ *      90000000        fa000000
+ *      a0000000        fc000000
+ *      b0000000        fe000000
+ */
+
+#define VIO_BASE        0xf8000000	/* virtual start of IO space */
+#define VIO_SHIFT       3		/* x = IO space shrink power */
+#define PIO_START       0x80000000	/* physical start of IO space */
+
+#define io_p2v( x )             \
+   ( (((x)&0x00ffffff) | (((x)&0x30000000)>>VIO_SHIFT)) + VIO_BASE )
+#define io_v2p( x )             \
+   ( (((x)&0x00ffffff) | (((x)&(0x30000000>>VIO_SHIFT))<<VIO_SHIFT)) + PIO_START )
+
+#ifndef __ASSEMBLY__
+
+# define __REG(x)	(*((volatile unsigned long *)io_p2v(x)))
+# define __PREG(x)	(io_v2p((unsigned long)&(x)))
+
+#else
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#endif
+
+#include "SA-1100.h"
+
+#ifdef CONFIG_SA1101
+#include "SA-1101.h"
+#endif
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-sa1100/include/mach/ide.h b/arch/arm/mach-sa1100/include/mach/ide.h
new file mode 100644
index 000000000000..4c99c8f5e617
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/ide.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/ide.h
+ *
+ * Copyright (c) 1998 Hugo Fiennes & Nicolas Pitre
+ *
+ * 18-aug-2000: Cleanup by Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
+ *              Get rid of the special ide_init_hwif_ports() functions
+ *              and make a generalised function that can be used by all
+ *              architectures.
+ */
+
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#error "This code is broken and needs update to match with current ide support"
+
+
+/*
+ * Set up a hw structure for a specified data port, control port and IRQ.
+ * This should follow whatever the default interface uses.
+ */
+static inline void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port,
+				       unsigned long ctrl_port, int *irq)
+{
+	unsigned long reg = data_port;
+	int i;
+	int regincr = 1;
+
+	/* The Empeg board has the first two address lines unused */
+	if (machine_is_empeg())
+		regincr = 1 << 2;
+
+	/* The LART doesn't use A0 for IDE */
+	if (machine_is_lart())
+		regincr = 1 << 1;
+
+	memset(hw, 0, sizeof(*hw));
+
+	for (i = 0; i <= 7; i++) {
+		hw->io_ports_array[i] = reg;
+		reg += regincr;
+	}
+
+	hw->io_ports.ctl_addr = ctrl_port;
+
+	if (irq)
+		*irq = 0;
+}
+
+/*
+ * This registers the standard ports for this architecture with the IDE
+ * driver.
+ */
+static __inline__ void
+ide_init_default_hwifs(void)
+{
+    if (machine_is_lart()) {
+#ifdef CONFIG_SA1100_LART
+        hw_regs_t hw;
+
+        /* Enable GPIO as interrupt line */
+        GPDR &= ~LART_GPIO_IDE;
+	set_irq_type(LART_IRQ_IDE, IRQ_TYPE_EDGE_RISING);
+
+        /* set PCMCIA interface timing */
+        MECR = 0x00060006;
+
+        /* init the interface */
+	ide_init_hwif_ports(&hw, PCMCIA_IO_0_BASE + 0x0000, PCMCIA_IO_0_BASE + 0x1000, NULL);
+        hw.irq = LART_IRQ_IDE;
+        ide_register_hw(&hw);
+#endif
+    }
+}
diff --git a/arch/arm/mach-sa1100/include/mach/io.h b/arch/arm/mach-sa1100/include/mach/io.h
new file mode 100644
index 000000000000..0c070a6149bc
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/io.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many 
+ * drivers out there that might just work if we fake them...
+ */
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)			__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/irqs.h b/arch/arm/mach-sa1100/include/mach/irqs.h
new file mode 100644
index 000000000000..0cb36609b3ac
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/irqs.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/irqs.h
+ *
+ * Copyright (C) 1996 Russell King
+ * Copyright (C) 1998 Deborah Wallach (updates for SA1100/Brutus).
+ * Copyright (C) 1999 Nicolas Pitre (full GPIO irq isolation)
+ *
+ * 2001/11/14	RMK	Cleaned up and standardised a lot of the IRQs.
+ */
+
+#define	IRQ_GPIO0		0
+#define	IRQ_GPIO1		1
+#define	IRQ_GPIO2		2
+#define	IRQ_GPIO3		3
+#define	IRQ_GPIO4		4
+#define	IRQ_GPIO5		5
+#define	IRQ_GPIO6		6
+#define	IRQ_GPIO7		7
+#define	IRQ_GPIO8		8
+#define	IRQ_GPIO9		9
+#define	IRQ_GPIO10		10
+#define	IRQ_GPIO11_27		11
+#define	IRQ_LCD  		12	/* LCD controller           */
+#define	IRQ_Ser0UDC		13	/* Ser. port 0 UDC          */
+#define	IRQ_Ser1SDLC		14	/* Ser. port 1 SDLC         */
+#define	IRQ_Ser1UART		15	/* Ser. port 1 UART         */
+#define	IRQ_Ser2ICP		16	/* Ser. port 2 ICP          */
+#define	IRQ_Ser3UART		17	/* Ser. port 3 UART         */
+#define	IRQ_Ser4MCP		18	/* Ser. port 4 MCP          */
+#define	IRQ_Ser4SSP		19	/* Ser. port 4 SSP          */
+#define	IRQ_DMA0 		20	/* DMA controller channel 0 */
+#define	IRQ_DMA1 		21	/* DMA controller channel 1 */
+#define	IRQ_DMA2 		22	/* DMA controller channel 2 */
+#define	IRQ_DMA3 		23	/* DMA controller channel 3 */
+#define	IRQ_DMA4 		24	/* DMA controller channel 4 */
+#define	IRQ_DMA5 		25	/* DMA controller channel 5 */
+#define	IRQ_OST0 		26	/* OS Timer match 0         */
+#define	IRQ_OST1 		27	/* OS Timer match 1         */
+#define	IRQ_OST2 		28	/* OS Timer match 2         */
+#define	IRQ_OST3 		29	/* OS Timer match 3         */
+#define	IRQ_RTC1Hz		30	/* RTC 1 Hz clock           */
+#define	IRQ_RTCAlrm		31	/* RTC Alarm                */
+
+#define	IRQ_GPIO11		32
+#define	IRQ_GPIO12		33
+#define	IRQ_GPIO13		34
+#define	IRQ_GPIO14		35
+#define	IRQ_GPIO15		36
+#define	IRQ_GPIO16		37
+#define	IRQ_GPIO17		38
+#define	IRQ_GPIO18		39
+#define	IRQ_GPIO19		40
+#define	IRQ_GPIO20		41
+#define	IRQ_GPIO21		42
+#define	IRQ_GPIO22		43
+#define	IRQ_GPIO23		44
+#define	IRQ_GPIO24		45
+#define	IRQ_GPIO25		46
+#define	IRQ_GPIO26		47
+#define	IRQ_GPIO27		48
+
+/*
+ * The next 16 interrupts are for board specific purposes.  Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these.  If you need more, increase IRQ_BOARD_END, but keep it
+ * within sensible limits.  IRQs 49 to 64 are available.
+ */
+#define IRQ_BOARD_START		49
+#define IRQ_BOARD_END		65
+
+#define IRQ_SA1111_START	(IRQ_BOARD_END)
+#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
+#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
+#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
+#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
+#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
+#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
+#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
+#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
+#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
+#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
+#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
+#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
+#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
+#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
+#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
+#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
+#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
+#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
+#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
+#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
+#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
+#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
+#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
+#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
+#define SSPXMTINT		(IRQ_BOARD_END + 24)
+#define SSPRCVINT		(IRQ_BOARD_END + 25)
+#define SSPROR			(IRQ_BOARD_END + 26)
+#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
+#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
+#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
+#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
+#define AUDTFSR			(IRQ_BOARD_END + 36)
+#define AUDRFSR			(IRQ_BOARD_END + 37)
+#define AUDTUR			(IRQ_BOARD_END + 38)
+#define AUDROR			(IRQ_BOARD_END + 39)
+#define AUDDTS			(IRQ_BOARD_END + 40)
+#define AUDRDD			(IRQ_BOARD_END + 41)
+#define AUDSTO			(IRQ_BOARD_END + 42)
+#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
+#define IRQ_HCIM		(IRQ_BOARD_END + 44)
+#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
+#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
+#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
+#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
+#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
+#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
+#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
+#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
+#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
+#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
+
+#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
+#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
+#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
+#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
+#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
+#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
+#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
+#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
+#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
+#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
+#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
+#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
+#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
+#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
+#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
+#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
+#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
+#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
+#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
+#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
+#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
+#define IRQ_LOCOMO_SPI_REND	(IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
+
+/*
+ * Figure out the MAX IRQ number.
+ *
+ * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
+ * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * Otherwise, we have the standard IRQs only.
+ */
+#ifdef CONFIG_SA1111
+#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
+#elif defined(CONFIG_SA1100_H3800)
+#define NR_IRQS			(IRQ_BOARD_END)
+#elif defined(CONFIG_SHARP_LOCOMO)
+#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
+#else
+#define NR_IRQS			(IRQ_BOARD_START)
+#endif
+
+/*
+ * Board specific IRQs.  Define them here.
+ * Do not surround them with ifdefs.
+ */
+#define IRQ_NEPONSET_SMC9196	(IRQ_BOARD_START + 0)
+#define IRQ_NEPONSET_USAR	(IRQ_BOARD_START + 1)
+#define IRQ_NEPONSET_SA1111	(IRQ_BOARD_START + 2)
+
+/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
+#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
+#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
+#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
+#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
+
+/* H3800-specific IRQs (CONFIG_SA1100_H3800) */
+#define H3800_KPIO_IRQ_START    (IRQ_BOARD_START)
+#define IRQ_H3800_KEY           (IRQ_BOARD_START + 0)
+#define IRQ_H3800_SPI           (IRQ_BOARD_START + 1)
+#define IRQ_H3800_OWM           (IRQ_BOARD_START + 2)
+#define IRQ_H3800_ADC           (IRQ_BOARD_START + 3)
+#define IRQ_H3800_UART_0        (IRQ_BOARD_START + 4)
+#define IRQ_H3800_UART_1        (IRQ_BOARD_START + 5)
+#define IRQ_H3800_TIMER_0       (IRQ_BOARD_START + 6)
+#define IRQ_H3800_TIMER_1       (IRQ_BOARD_START + 7)
+#define IRQ_H3800_TIMER_2       (IRQ_BOARD_START + 8)
+#define H3800_KPIO_IRQ_COUNT    9
+
+#define H3800_GPIO_IRQ_START    (IRQ_BOARD_START + 9)
+#define IRQ_H3800_PEN           (IRQ_BOARD_START + 9)
+#define IRQ_H3800_SD_DETECT     (IRQ_BOARD_START + 10)
+#define IRQ_H3800_EAR_IN        (IRQ_BOARD_START + 11)
+#define IRQ_H3800_USB_DETECT    (IRQ_BOARD_START + 12)
+#define IRQ_H3800_SD_CON_SLT    (IRQ_BOARD_START + 13)
+#define H3800_GPIO_IRQ_COUNT    5
diff --git a/arch/arm/mach-sa1100/include/mach/jornada720.h b/arch/arm/mach-sa1100/include/mach/jornada720.h
new file mode 100644
index 000000000000..bc120850d313
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/jornada720.h
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/jornada720.h
+ *
+ * This file contains SSP/MCU communication definitions for HP Jornada 710/720/728
+ *
+ * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ *  Copyright (C) 2000 John Ankcorn <jca@lcs.mit.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ /* HP Jornada 7xx microprocessor commands */
+#define GETBATTERYDATA		0xc0
+#define GETSCANKEYCODE		0x90
+#define GETTOUCHSAMPLES		0xa0
+#define GETCONTRAST		0xD0
+#define SETCONTRAST		0xD1
+#define GETBRIGHTNESS		0xD2
+#define SETBRIGHTNESS		0xD3
+#define CONTRASTOFF		0xD8
+#define BRIGHTNESSOFF		0xD9
+#define PWMOFF			0xDF
+#define TXDUMMY			0x11
+#define ERRORCODE		0x00
diff --git a/arch/arm/mach-sa1100/include/mach/lart.h b/arch/arm/mach-sa1100/include/mach/lart.h
new file mode 100644
index 000000000000..8a5482d908db
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/lart.h
@@ -0,0 +1,13 @@
+#ifndef _INCLUDE_LART_H
+#define _INCLUDE_LART_H
+
+#define LART_GPIO_ETH0			GPIO_GPIO0
+#define LART_IRQ_ETH0			IRQ_GPIO0
+
+#define LART_GPIO_IDE			GPIO_GPIO1
+#define LART_IRQ_IDE			IRQ_GPIO1
+
+#define LART_GPIO_UCB1200		GPIO_GPIO18
+#define LART_IRQ_UCB1200		IRQ_GPIO18
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
new file mode 100644
index 000000000000..fb8b09a57ad7
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-sa1100/include/mach/mcp.h
+ *
+ *  Copyright (C) 2005 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_ARCH_MCP_H
+#define __ASM_ARM_ARCH_MCP_H
+
+#include <linux/types.h>
+
+struct mcp_plat_data {
+	u32 mccr0;
+	u32 mccr1;
+	unsigned int sclk_rate;
+};
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h
new file mode 100644
index 000000000000..29f639e2afc6
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/memory.h
@@ -0,0 +1,68 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/memory.h
+ *
+ * Copyright (C) 1999-2000 Nicolas Pitre <nico@cam.org>
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset is 0xc0000000 on the SA1100
+ */
+#define PHYS_OFFSET	UL(0xc0000000)
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_SA1111
+void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+	sa1111_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_1M - 1)
+
+#endif
+#endif
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ *
+ * On the SA1100, bus addresses are equivalent to physical addresses.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+/*
+ * Because of the wide memory address space between physical RAM banks on the 
+ * SA1100, it's much convenient to use Linux's NUMA support to implement our 
+ * memory map representation.  Assuming all memory nodes have equal access 
+ * characteristics, we then have generic discontiguous memory support.
+ *
+ * Of course, all this isn't mandatory for SA1100 implementations with only
+ * one used memory bank.  For those, simply undefine CONFIG_DISCONTIGMEM.
+ *
+ * The nodes are matched with the physical memory bank addresses which are 
+ * incidentally the same as virtual addresses.
+ * 
+ * 	node 0:  0xc0000000 - 0xc7ffffff
+ * 	node 1:  0xc8000000 - 0xcfffffff
+ * 	node 2:  0xd0000000 - 0xd7ffffff
+ * 	node 3:  0xd8000000 - 0xdfffffff
+ */
+#define NODE_MEM_SIZE_BITS	27
+
+/*
+ * Cache flushing area - SA1100 zero bank
+ */
+#define FLUSH_BASE_PHYS		0xe0000000
+#define FLUSH_BASE		0xf5000000
+#define FLUSH_BASE_MINICACHE	0xf5100000
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/mtd-xip.h b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
new file mode 100644
index 000000000000..80cfdac2b944
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/mtd-xip.h
@@ -0,0 +1,26 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ * 
+ * Author:	Nicolas Pitre
+ * Created:	Nov 2, 2004
+ * Copyright:	(C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $
+ */
+
+#ifndef __ARCH_SA1100_MTD_XIP_H__
+#define __ARCH_SA1100_MTD_XIP_H__
+
+#define xip_irqpending()	(ICIP & ICMR)
+
+/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
+#define xip_currtime()		(OSCR)
+#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
+
+#endif /* __ARCH_SA1100_MTD_XIP_H__ */
diff --git a/arch/arm/mach-sa1100/include/mach/neponset.h b/arch/arm/mach-sa1100/include/mach/neponset.h
new file mode 100644
index 000000000000..d3f044f92c00
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/neponset.h
@@ -0,0 +1,74 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/neponset.h
+ *
+ * Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
+ *
+ * This file contains the hardware specific definitions for Assabet
+ * Only include this file from SA1100-specific files.
+ *
+ * 2000/05/23 John Dorsey <john+@cs.cmu.edu>
+ *      Definitions for Neponset added.
+ */
+#ifndef __ASM_ARCH_NEPONSET_H
+#define __ASM_ARCH_NEPONSET_H
+
+/*
+ * Neponset definitions: 
+ */
+
+#define NEPONSET_CPLD_BASE      (0x10000000)
+#define Nep_p2v( x )            ((x) - NEPONSET_CPLD_BASE + 0xf3000000)
+#define Nep_v2p( x )            ((x) - 0xf3000000 + NEPONSET_CPLD_BASE)
+
+#define _IRR                    0x10000024      /* Interrupt Reason Register */
+#define _AUD_CTL                0x100000c0      /* Audio controls (RW)       */
+#define _MDM_CTL_0              0x100000b0      /* Modem control 0 (RW)      */
+#define _MDM_CTL_1              0x100000b4      /* Modem control 1 (RW)      */
+#define _NCR_0	                0x100000a0      /* Control Register (RW)     */
+#define _KP_X_OUT               0x10000090      /* Keypad row write (RW)     */
+#define _KP_Y_IN                0x10000080      /* Keypad column read (RO)   */
+#define _SWPK                   0x10000020      /* Switch pack (RO)          */
+#define _WHOAMI                 0x10000000      /* System ID Register (RO)   */
+
+#define _LEDS                   0x10000010      /* LEDs [31:0] (WO)          */
+
+#define IRR                     (*((volatile u_char *) Nep_p2v(_IRR)))
+#define AUD_CTL                 (*((volatile u_char *) Nep_p2v(_AUD_CTL)))
+#define MDM_CTL_0               (*((volatile u_char *) Nep_p2v(_MDM_CTL_0)))
+#define MDM_CTL_1               (*((volatile u_char *) Nep_p2v(_MDM_CTL_1)))
+#define NCR_0			(*((volatile u_char *) Nep_p2v(_NCR_0)))
+#define KP_X_OUT                (*((volatile u_char *) Nep_p2v(_KP_X_OUT)))
+#define KP_Y_IN                 (*((volatile u_char *) Nep_p2v(_KP_Y_IN)))
+#define SWPK                    (*((volatile u_char *) Nep_p2v(_SWPK)))
+#define WHOAMI                  (*((volatile u_char *) Nep_p2v(_WHOAMI)))
+
+#define LEDS                    (*((volatile Word   *) Nep_p2v(_LEDS)))
+
+#define IRR_ETHERNET		(1<<0)
+#define IRR_USAR		(1<<1)
+#define IRR_SA1111		(1<<2)
+
+#define AUD_SEL_1341            (1<<0)
+#define AUD_MUTE_1341           (1<<1)
+
+#define MDM_CTL0_RTS1		(1 << 0)
+#define MDM_CTL0_DTR1		(1 << 1)
+#define MDM_CTL0_RTS2		(1 << 2)
+#define MDM_CTL0_DTR2		(1 << 3)
+
+#define MDM_CTL1_CTS1		(1 << 0)
+#define MDM_CTL1_DSR1		(1 << 1)
+#define MDM_CTL1_DCD1		(1 << 2)
+#define MDM_CTL1_CTS2		(1 << 3)
+#define MDM_CTL1_DSR2		(1 << 4)
+#define MDM_CTL1_DCD2		(1 << 5)
+
+#define NCR_GP01_OFF		(1<<0)
+#define NCR_TP_PWR_EN		(1<<1)
+#define NCR_MS_PWR_EN		(1<<2)
+#define NCR_ENET_OSC_EN		(1<<3)
+#define NCR_SPI_KB_WK_UP	(1<<4)
+#define NCR_A0VPP		(1<<5)
+#define NCR_A1VPP		(1<<6)
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/reset.h b/arch/arm/mach-sa1100/include/mach/reset.h
new file mode 100644
index 000000000000..f61957e6842a
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/reset.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H
+
+#include "hardware.h"
+
+#define RESET_STATUS_HARDWARE	(1 << 0)	/* Hardware Reset */
+#define RESET_STATUS_WATCHDOG	(1 << 1)	/* Watchdog Reset */
+#define RESET_STATUS_LOWPOWER	(1 << 2)	/* Exit from Low Power/Sleep */
+#define RESET_STATUS_GPIO	(1 << 3)	/* GPIO Reset */
+#define RESET_STATUS_ALL	(0xf)
+
+extern unsigned int reset_status;
+static inline void clear_reset_status(unsigned int mask)
+{
+	RCSR = mask;
+}
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-sa1100/include/mach/shannon.h b/arch/arm/mach-sa1100/include/mach/shannon.h
new file mode 100644
index 000000000000..ec27d6e12140
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/shannon.h
@@ -0,0 +1,43 @@
+#ifndef _INCLUDE_SHANNON_H
+#define _INCLUDE_SHANNON_H
+
+/* taken from comp.os.inferno Tue, 12 Sep 2000 09:21:50 GMT,
+ * written by <forsyth@vitanuova.com> */
+
+#define SHANNON_GPIO_SPI_FLASH		GPIO_GPIO (0)	/* Output - Driven low, enables SPI to flash */
+#define SHANNON_GPIO_SPI_DSP		GPIO_GPIO (1)	/* Output - Driven low, enables SPI to DSP */
+/* lcd lower = GPIO 2-9 */
+#define SHANNON_GPIO_SPI_OUTPUT		GPIO_GPIO (10)	/* Output - SPI output to DSP */
+#define SHANNON_GPIO_SPI_INPUT		GPIO_GPIO (11)	/* Input  - SPI input from DSP */
+#define SHANNON_GPIO_SPI_CLOCK		GPIO_GPIO (12)	/* Output - Clock for SPI */
+#define SHANNON_GPIO_SPI_FRAME		GPIO_GPIO (13)	/* Output - Frame marker - not used */
+#define SHANNON_GPIO_SPI_RTS		GPIO_GPIO (14)	/* Input  - SPI Ready to Send */
+#define SHANNON_IRQ_GPIO_SPI_RTS	IRQ_GPIO14
+#define SHANNON_GPIO_SPI_CTS		GPIO_GPIO (15)	/* Output - SPI Clear to Send */
+#define SHANNON_GPIO_IRQ_CODEC		GPIO_GPIO (16)	/* in, irq from ucb1200 */
+#define SHANNON_IRQ_GPIO_IRQ_CODEC	IRQ_GPIO16
+#define SHANNON_GPIO_DSP_RESET		GPIO_GPIO (17)	/* Output - Drive low to reset the DSP */
+#define SHANNON_GPIO_CODEC_RESET	GPIO_GPIO (18)	/* Output - Drive low to reset the UCB1x00 */
+#define SHANNON_GPIO_U3_RTS		GPIO_GPIO (19)	/* ?? */
+#define SHANNON_GPIO_U3_CTS		GPIO_GPIO (20)	/* ?? */
+#define SHANNON_GPIO_SENSE_12V		GPIO_GPIO (21)	/* Input, 12v flash unprotect detected */
+#define SHANNON_GPIO_DISP_EN		GPIO_GPIO (22)	/* out */
+/* XXX GPIO 23 unaccounted for */
+#define SHANNON_GPIO_EJECT_0		GPIO_GPIO (24)	/* in */
+#define SHANNON_IRQ_GPIO_EJECT_0	IRQ_GPIO24
+#define SHANNON_GPIO_EJECT_1		GPIO_GPIO (25)	/* in */
+#define SHANNON_IRQ_GPIO_EJECT_1	IRQ_GPIO25
+#define SHANNON_GPIO_RDY_0		GPIO_GPIO (26)	/* in */
+#define SHANNON_IRQ_GPIO_RDY_0		IRQ_GPIO26
+#define SHANNON_GPIO_RDY_1		GPIO_GPIO (27)	/* in */
+#define SHANNON_IRQ_GPIO_RDY_1		IRQ_GPIO27
+
+/* MCP UCB codec GPIO pins... */
+
+#define SHANNON_UCB_GPIO_BACKLIGHT	9
+#define SHANNON_UCB_GPIO_BRIGHT_MASK  	7
+#define SHANNON_UCB_GPIO_BRIGHT		6
+#define SHANNON_UCB_GPIO_CONTRAST_MASK	0x3f
+#define SHANNON_UCB_GPIO_CONTRAST	0
+
+#endif
diff --git a/arch/arm/mach-sa1100/include/mach/simpad.h b/arch/arm/mach-sa1100/include/mach/simpad.h
new file mode 100644
index 000000000000..9296c4513ce1
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/simpad.h
@@ -0,0 +1,112 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/simpad.h
+ *
+ * based of assabet.h same as HUW_Webpanel
+ *
+ * This file contains the hardware specific definitions for SIMpad
+ *
+ * 2001/05/14 Juergen Messerer <juergen.messerer@freesurf.ch>
+ */
+
+#ifndef __ASM_ARCH_SIMPAD_H
+#define __ASM_ARCH_SIMPAD_H
+
+
+#define GPIO_UART1_RTS	GPIO_GPIO14
+#define GPIO_UART1_DTR	GPIO_GPIO7
+#define GPIO_UART1_CTS	GPIO_GPIO8
+#define GPIO_UART1_DCD	GPIO_GPIO23
+#define GPIO_UART1_DSR	GPIO_GPIO6
+
+#define GPIO_UART3_RTS	GPIO_GPIO12
+#define GPIO_UART3_DTR	GPIO_GPIO16
+#define GPIO_UART3_CTS	GPIO_GPIO13
+#define GPIO_UART3_DCD	GPIO_GPIO18
+#define GPIO_UART3_DSR	GPIO_GPIO17
+
+#define GPIO_POWER_BUTTON	GPIO_GPIO0
+#define GPIO_UCB1300_IRQ	GPIO_GPIO22	/* UCB GPIO and touchscreen */
+
+#define IRQ_UART1_CTS	IRQ_GPIO15
+#define IRQ_UART1_DCD	GPIO_GPIO23
+#define IRQ_UART1_DSR	GPIO_GPIO6
+#define IRQ_UART3_CTS	GPIO_GPIO13
+#define IRQ_UART3_DCD	GPIO_GPIO18
+#define IRQ_UART3_DSR	GPIO_GPIO17
+
+#define IRQ_GPIO_UCB1300_IRQ IRQ_GPIO22
+#define IRQ_GPIO_POWER_BUTTON IRQ_GPIO0
+
+
+/*---  PCMCIA  ---*/
+#define GPIO_CF_CD              GPIO_GPIO24
+#define GPIO_CF_IRQ             GPIO_GPIO1
+#define IRQ_GPIO_CF_IRQ         IRQ_GPIO1
+#define IRQ_GPIO_CF_CD          IRQ_GPIO24
+
+/*--- SmartCard ---*/
+#define GPIO_SMART_CARD		GPIO_GPIO10
+#define IRQ_GPIO_SMARD_CARD	IRQ_GPIO10
+
+// CS3 Latch is write only, a shadow is necessary
+
+#define CS3BUSTYPE unsigned volatile long
+#define CS3_BASE        0xf1000000
+
+#define VCC_5V_EN       0x0001 // For 5V PCMCIA
+#define VCC_3V_EN       0x0002 // FOR 3.3V PCMCIA
+#define EN1             0x0004 // This is only for EPROM's
+#define EN0             0x0008 // Both should be enable for 3.3V or 5V
+#define DISPLAY_ON      0x0010
+#define PCMCIA_BUFF_DIS 0x0020
+#define MQ_RESET        0x0040
+#define PCMCIA_RESET    0x0080
+#define DECT_POWER_ON   0x0100
+#define IRDA_SD         0x0200 // Shutdown for powersave
+#define RS232_ON        0x0400
+#define SD_MEDIAQ       0x0800 // Shutdown for powersave
+#define LED2_ON         0x1000
+#define IRDA_MODE       0x2000 // Fast/Slow IrDA mode
+#define ENABLE_5V       0x4000 // Enable 5V circuit
+#define RESET_SIMCARD   0x8000
+
+#define RS232_ENABLE    0x0440
+#define PCMCIAMASK      0x402f
+
+
+struct simpad_battery {
+	unsigned char ac_status;	/* line connected yes/no */
+	unsigned char status;		/* battery loading yes/no */
+	unsigned char percentage;	/* percentage loaded */
+	unsigned short life;		/* life till empty */
+};
+
+/* These should match the apm_bios.h definitions */
+#define SIMPAD_AC_STATUS_AC_OFFLINE      0x00
+#define SIMPAD_AC_STATUS_AC_ONLINE       0x01
+#define SIMPAD_AC_STATUS_AC_BACKUP       0x02   /* What does this mean? */
+#define SIMPAD_AC_STATUS_AC_UNKNOWN      0xff
+
+/* These bitfields are rarely "or'd" together */
+#define SIMPAD_BATT_STATUS_HIGH          0x01
+#define SIMPAD_BATT_STATUS_LOW           0x02
+#define SIMPAD_BATT_STATUS_CRITICAL      0x04
+#define SIMPAD_BATT_STATUS_CHARGING      0x08
+#define SIMPAD_BATT_STATUS_CHARGE_MAIN   0x10
+#define SIMPAD_BATT_STATUS_DEAD          0x20   /* Battery will not charge */
+#define SIMPAD_BATT_NOT_INSTALLED        0x20   /* For expansion pack batteries */
+#define SIMPAD_BATT_STATUS_FULL          0x40   /* Battery fully charged (and connected to AC) */
+#define SIMPAD_BATT_STATUS_NOBATT        0x80
+#define SIMPAD_BATT_STATUS_UNKNOWN       0xff
+
+extern int simpad_get_battery(struct simpad_battery* );
+
+#endif // __ASM_ARCH_SIMPAD_H
+
+
+
+
+
+
+
+
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
new file mode 100644
index 000000000000..63755ca5b1b4
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/system.h
+ *
+ * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ */
+#include <mach/hardware.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	if (mode == 's') {
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+	} else {
+		/* Use on-chip reset capability */
+		RSRR = RSRR_SWR;
+	}
+}
diff --git a/arch/arm/mach-sa1100/include/mach/timex.h b/arch/arm/mach-sa1100/include/mach/timex.h
new file mode 100644
index 000000000000..7a5d017b58b3
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/timex.h
@@ -0,0 +1,12 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/timex.h
+ *
+ * SA1100 architecture timex specifications
+ *
+ * Copyright (C) 1998 
+ */
+
+/*
+ * SA1100 timer
+ */
+#define CLOCK_TICK_RATE		3686400
diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h
new file mode 100644
index 000000000000..714160b03d7a
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/uncompress.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/uncompress.h
+ *
+ * (C) 1999 Nicolas Pitre <nico@cam.org>
+ *
+ * Reorganised to be machine independent.
+ */
+
+#include "hardware.h"
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ */
+
+#define UART(x)		(*(volatile unsigned long *)(serial_port + (x)))
+
+static void putc(int c)
+{
+	unsigned long serial_port;
+
+	do {
+		serial_port = _Ser3UTCR0;
+		if (UART(UTCR3) & UTCR3_TXE) break;
+		serial_port = _Ser1UTCR0;
+		if (UART(UTCR3) & UTCR3_TXE) break;
+		serial_port = _Ser2UTCR0;
+		if (UART(UTCR3) & UTCR3_TXE) break;
+		return;
+	} while (0);
+
+	/* wait for space in the UART's transmitter */
+	while (!(UART(UTSR1) & UTSR1_TNF))
+		barrier();
+
+	/* send the character out. */
+	UART(UTDR) = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Nothing to do for these
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-sa1100/include/mach/vmalloc.h b/arch/arm/mach-sa1100/include/mach/vmalloc.h
new file mode 100644
index 000000000000..ec8fdc5a3606
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-sa1100/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (0xe8000000)
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index fa0403af7eec..86369a8f0cea 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -16,7 +16,7 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 
 #include "generic.h"
@@ -46,17 +46,17 @@ static int sa1100_gpio_type(unsigned int irq, unsigned int type)
 	else
 		mask = GPIO11_27_MASK(irq);
 
-	if (type == IRQT_PROBE) {
+	if (type == IRQ_TYPE_PROBE) {
 		if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
 			return 0;
-		type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+		type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
 	}
 
-	if (type & __IRQT_RISEDGE) {
+	if (type & IRQ_TYPE_EDGE_RISING) {
 		GPIO_IRQ_rising_edge |= mask;
 	} else
 		GPIO_IRQ_rising_edge &= ~mask;
-	if (type & __IRQT_FALEDGE) {
+	if (type & IRQ_TYPE_EDGE_FALLING) {
 		GPIO_IRQ_falling_edge |= mask;
 	} else
 		GPIO_IRQ_falling_edge &= ~mask;
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 52ac37d1e23a..81848aa96424 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -23,7 +23,7 @@
 #include <linux/mtd/partitions.h>
 #include <video/s1d13xxxfb.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c
index 395c39bed7d8..06ea7abd9170 100644
--- a/arch/arm/mach-sa1100/jornada720_ssp.c
+++ b/arch/arm/mach-sa1100/jornada720_ssp.c
@@ -20,9 +20,9 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/ssp.h>
-#include <asm/arch/jornada720.h>
+#include <mach/jornada720.h>
 
 static DEFINE_SPINLOCK(jornada_ssp_lock);
 static unsigned long jornada_ssp_flags;
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 07d3a696ae7f..0cd52692d2f7 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -6,14 +6,14 @@
 #include <linux/kernel.h>
 #include <linux/tty.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
+#include <mach/mcp.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/leds-assabet.c b/arch/arm/mach-sa1100/leds-assabet.c
index ee9788989875..64e9b4b11b54 100644
--- a/arch/arm/mach-sa1100/leds-assabet.c
+++ b/arch/arm/mach-sa1100/leds-assabet.c
@@ -11,10 +11,10 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <asm/arch/assabet.h>
+#include <mach/assabet.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-sa1100/leds-badge4.c b/arch/arm/mach-sa1100/leds-badge4.c
index 280929be972d..cf1e38458b81 100644
--- a/arch/arm/mach-sa1100/leds-badge4.c
+++ b/arch/arm/mach-sa1100/leds-badge4.c
@@ -12,7 +12,7 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-cerf.c b/arch/arm/mach-sa1100/leds-cerf.c
index f38eeddbef10..259b48e0be89 100644
--- a/arch/arm/mach-sa1100/leds-cerf.c
+++ b/arch/arm/mach-sa1100/leds-cerf.c
@@ -5,7 +5,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c
index 7e91cc90b5ae..2bce137462e4 100644
--- a/arch/arm/mach-sa1100/leds-hackkit.c
+++ b/arch/arm/mach-sa1100/leds-hackkit.c
@@ -11,7 +11,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-lart.c b/arch/arm/mach-sa1100/leds-lart.c
index 2d27d76cfc6b..0505a1fdcdb2 100644
--- a/arch/arm/mach-sa1100/leds-lart.c
+++ b/arch/arm/mach-sa1100/leds-lart.c
@@ -11,7 +11,7 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/mach-sa1100/leds-simpad.c b/arch/arm/mach-sa1100/leds-simpad.c
index def090a87385..d50f4eeaa12e 100644
--- a/arch/arm/mach-sa1100/leds-simpad.c
+++ b/arch/arm/mach-sa1100/leds-simpad.c
@@ -5,10 +5,10 @@
  */
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <asm/arch/simpad.h>
+#include <mach/simpad.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index 9f1ed1509301..4856a6bd2482 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -10,14 +10,14 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/assabet.h>
-#include <asm/arch/neponset.h>
+#include <mach/assabet.h>
+#include <mach/neponset.h>
 #include <asm/hardware/sa1111.h>
 #include <asm/sizes.h>
 
@@ -151,7 +151,7 @@ static int __devinit neponset_probe(struct platform_device *dev)
 	/*
 	 * Install handler for GPIO25.
 	 */
-	set_irq_type(IRQ_GPIO25, IRQT_RISING);
+	set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING);
 	set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler);
 
 	/*
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index c7bf7e0038f0..83be1c6c5f80 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -11,7 +11,7 @@
 
 #include <linux/mtd/partitions.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -20,7 +20,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 #include "generic.h"
 
@@ -143,7 +143,7 @@ static void __init pleb_map_io(void)
 
 	GPDR &= ~GPIO_ETH0_IRQ;
 
-	set_irq_type(GPIO_ETH0_IRQ, IRQT_FALLING);
+	set_irq_type(GPIO_ETH0_IRQ, IRQ_TYPE_EDGE_FALLING);
 }
 
 MACHINE_START(PLEB, "PLEB")
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 1693d447a224..111cce67ad2f 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -27,7 +27,7 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/memory.h>
 #include <asm/system.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 8acab7b1e4c2..9ccdd09cf69f 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -9,7 +9,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/setup.h>
 
@@ -17,8 +17,8 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
-#include <asm/arch/shannon.h>
+#include <mach/mcp.h>
+#include <mach/shannon.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index a9ae1b581aa6..8dd635317959 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -14,7 +14,7 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/setup.h>
 
 #include <asm/mach-types.h>
@@ -22,8 +22,8 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 #include <asm/mach/serial_sa1100.h>
-#include <asm/arch/mcp.h>
-#include <asm/arch/simpad.h>
+#include <mach/mcp.h>
+#include <mach/simpad.h>
 
 #include <linux/serial_core.h>
 #include <linux/ioport.h>
diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S
index 5a84062f92af..171441f96710 100644
--- a/arch/arm/mach-sa1100/sleep.S
+++ b/arch/arm/mach-sa1100/sleep.S
@@ -18,7 +18,7 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 
 
diff --git a/arch/arm/mach-sa1100/ssp.c b/arch/arm/mach-sa1100/ssp.c
index 06206ceb312e..641f361c56f4 100644
--- a/arch/arm/mach-sa1100/ssp.c
+++ b/arch/arm/mach-sa1100/ssp.c
@@ -20,7 +20,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/ssp.h>
 
 #define TIMEOUT 100000
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index a9799cb35b74..24c0a4bae850 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -16,7 +16,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define MIN_OSCR_DELTA 2
 
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
new file mode 100644
index 000000000000..0836cb78b29a
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -0,0 +1,31 @@
+/* arch/arm/mach-shark/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mov	\rx, #0xe0000000
+		orr	\rx, \rx, #0x000003f8
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+		mov	\rd, #0
+1001:		add	\rd, \rd, #1
+		teq	\rd, #0x10000
+		bne	1001b
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
diff --git a/arch/arm/mach-shark/include/mach/dma.h b/arch/arm/mach-shark/include/mach/dma.h
new file mode 100644
index 000000000000..c0a29bd2a74f
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/dma.h
@@ -0,0 +1,18 @@
+/*
+ * arch/arm/mach-shark/include/mach/dma.h
+ *
+ * by Alexander Schulz
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* Use only the lowest 4MB, nothing else works.
+ * The rest is not DMAable. See dev /  .properties
+ * in OpenFirmware.
+ */
+#define MAX_DMA_ADDRESS		0xC0400000
+#define MAX_DMA_CHANNELS	8
+#define DMA_ISA_CASCADE         4
+
+#endif /* _ASM_ARCH_DMA_H */
+
diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S
new file mode 100644
index 000000000000..e2853c0a3333
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/entry-macro.S
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/mach-shark/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Shark platform
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mov	r4, #0xe0000000
+
+		mov	\irqstat, #0x0C
+		strb	\irqstat, [r4, #0x20]		@outb(0x0C, 0x20) /* Poll command */
+		ldrb	\irqnr, [r4, #0x20]		@irq = inb(0x20) & 7
+		and	\irqstat, \irqnr, #0x80
+		teq	\irqstat, #0
+		beq	43f
+		and	\irqnr, \irqnr, #7
+		teq	\irqnr, #2
+		bne	44f
+43:		mov	\irqstat, #0x0C
+		strb	\irqstat, [r4, #0xa0]		@outb(0x0C, 0xA0) /* Poll command */
+		ldrb	\irqnr, [r4, #0xa0]		@irq = (inb(0xA0) & 7) + 8
+		and	\irqstat, \irqnr, #0x80
+		teq	\irqstat, #0
+		beq	44f
+		and	\irqnr, \irqnr, #7
+		add	\irqnr, \irqnr, #8
+44:		teq	\irqstat, #0
+		.endm
+
diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h
new file mode 100644
index 000000000000..cb0ee2943c1a
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/hardware.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/mach-shark/include/mach/hardware.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-ebsa110/include/mach/hardware.h
+ * Copyright (C) 1996-1999 Russell King.
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Mapping areas
+ */
+#define IO_BASE			0xe0000000
+
+#else
+
+#define IO_BASE			0
+
+#endif
+
+#define IO_SIZE			0x08000000
+#define IO_START		0x40000000
+#define ROMCARD_SIZE		0x08000000
+#define ROMCARD_START		0x10000000
+
+#define PCIO_BASE		0xe0000000
+
+
+/* defines for the Framebuffer */
+#define FB_START		0x06000000
+#define FB_SIZE			0x01000000
+
+#define UNCACHEABLE_ADDR        0xdf010000
+
+#define SEQUOIA_LED_GREEN       (1<<6)
+#define SEQUOIA_LED_AMBER       (1<<5)
+#define SEQUOIA_LED_BACK        (1<<7)
+
+#define pcibios_assign_all_busses()     1
+
+#define PCIBIOS_MIN_IO          0x6000
+#define PCIBIOS_MIN_MEM         0x50000000
+#define PCIMEM_BASE		0xe8000000
+
+#endif
+
diff --git a/arch/arm/mach-shark/include/mach/io.h b/arch/arm/mach-shark/include/mach/io.h
new file mode 100644
index 000000000000..92475922c068
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/io.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/mach-shark/include/mach/io.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-ebsa110/include/mach/io.h
+ * Copyright (C) 1997,1998 Russell King
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We use two different types of addressing - PC style addresses, and ARM
+ * addresses.  PC style accesses the PC hardware with the normal PC IO
+ * addresses, eg 0x3f8 for serial#1.  ARM addresses are 0x80000000+
+ * and are translated to the start of IO.
+ */
+#define __PORT_PCIO(x)	(!((x) & 0x80000000))
+
+#define __io(a)                 ((void __iomem *)(PCIO_BASE + (a)))
+
+
+static inline unsigned int __ioaddr (unsigned int port)			\
+{										\
+	if (__PORT_PCIO(port))							\
+		return (unsigned int)(PCIO_BASE + (port));			\
+	else									\
+		return (unsigned int)(IO_BASE + (port));			\
+}
+
+#define __mem_pci(addr) (addr)
+
+/*
+ * Translated address IO functions
+ *
+ * IO address has already been translated to a virtual address
+ */
+#define outb_t(v,p)								\
+	(*(volatile unsigned char *)(p) = (v))
+
+#define inb_t(p)								\
+	(*(volatile unsigned char *)(p))
+
+#define outl_t(v,p)								\
+	(*(volatile unsigned long *)(p) = (v))
+
+#define inl_t(p)								\
+	(*(volatile unsigned long *)(p))
+
+#endif
diff --git a/arch/arm/mach-shark/include/mach/irqs.h b/arch/arm/mach-shark/include/mach/irqs.h
new file mode 100644
index 000000000000..0586acd7cdd5
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/irqs.h
@@ -0,0 +1,13 @@
+/*
+ * arch/arm/mach-shark/include/mach/irqs.h
+ *
+ * by Alexander Schulz
+ */
+
+#define NR_IRQS			16
+
+#define IRQ_ISA_KEYBOARD	 1
+#define RTC_IRQ			 8
+#define I8042_KBD_IRQ		 1
+#define I8042_AUX_IRQ		12
+#define IRQ_HARDDISK            14
diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h
new file mode 100644
index 000000000000..b7874ad9f9f6
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/memory.h
@@ -0,0 +1,48 @@
+/*
+ * arch/arm/mach-shark/include/mach/memory.h
+ *
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-ebsa110/include/mach/memory.h
+ * Copyright (c) 1996-1999 Russell King.
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/sizes.h>
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET     UL(0x08000000)
+
+#ifndef __ASSEMBLY__
+
+static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsigned long *zhole_size) 
+{
+  if (node != 0) return;
+  /* Only the first 4 MB (=1024 Pages) are usable for DMA */
+  zone_size[1] = zone_size[0] - 1024;
+  zone_size[0] = 1024;
+  zhole_size[1] = zhole_size[0];
+  zhole_size[0] = 0;
+}
+
+#define arch_adjust_zones(node, size, holes) \
+	__arch_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_4M - 1)
+
+#endif
+
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+/*
+ * Cache flushing area
+ */
+#define FLUSH_BASE_PHYS		0x80000000
+#define FLUSH_BASE		0xdf000000
+
+#endif
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
new file mode 100644
index 000000000000..85aceef6f874
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/system.h
@@ -0,0 +1,28 @@
+/*
+ * arch/arm/mach-shark/include/mach/system.h
+ *
+ * by Alexander Schulz
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/io.h>
+
+static void arch_reset(char mode)
+{
+	short temp;
+	local_irq_disable();
+	/* Reset the Machine via pc[3] of the sequoia chipset */
+	outw(0x09,0x24);
+	temp=inw(0x26);
+	temp = temp | (1<<3) | (1<<10);
+	outw(0x09,0x24);
+	outw(temp,0x26);
+
+}
+
+static inline void arch_idle(void)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-shark/include/mach/timex.h b/arch/arm/mach-shark/include/mach/timex.h
new file mode 100644
index 000000000000..bb6eeaebed86
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/timex.h
@@ -0,0 +1,7 @@
+/*
+ * arch/arm/mach-shark/include/mach/timex.h
+ *
+ * by Alexander Schulz
+ */
+
+#define CLOCK_TICK_RATE 1193180
diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h
new file mode 100644
index 000000000000..3725e1633418
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/uncompress.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/mach-shark/include/mach/uncompress.h
+ * by Alexander Schulz
+ *
+ * derived from:
+ * arch/arm/mach-footbridge/include/mach/uncompress.h
+ * Copyright (C) 1996,1997,1998 Russell King
+ */
+
+#define SERIAL_BASE ((volatile unsigned char *)0x400003f8)
+
+static inline void putc(int c)
+{
+	int t;
+
+	SERIAL_BASE[0] = c;
+	t=0x10000;
+	while (t--);
+}
+
+static inline void flush(void)
+{
+}
+
+#ifdef DEBUG
+static void putn(unsigned long z)
+{
+	int i;
+	char x;
+
+	putc('0');
+	putc('x');
+	for (i=0;i<8;i++) {
+		x='0'+((z>>((7-i)*4))&0xf);
+		if (x>'9') x=x-'0'+'A'-10;
+		putc(x);
+	}
+}
+
+static void putr()
+{
+	putc('\n');
+	putc('\r');
+}
+#endif
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-shark/include/mach/vmalloc.h b/arch/arm/mach-shark/include/mach/vmalloc.h
new file mode 100644
index 000000000000..f6c6837c5451
--- /dev/null
+++ b/arch/arm/mach-shark/include/mach/vmalloc.h
@@ -0,0 +1,4 @@
+/*
+ * arch/arm/mach-shark/include/mach/vmalloc.h
+ */
+#define VMALLOC_END       (PAGE_OFFSET + 0x10000000)
diff --git a/arch/arm/mach-shark/irq.c b/arch/arm/mach-shark/irq.c
index 5b0c6af44ec6..44b0811b400c 100644
--- a/arch/arm/mach-shark/irq.c
+++ b/arch/arm/mach-shark/irq.c
@@ -4,7 +4,7 @@
  * by Alexander Schulz
  *
  * derived from linux/arch/ppc/kernel/i8259.c and:
- * include/asm-arm/arch-ebsa110/irq.h
+ * arch/arm/mach-ebsa110/include/mach/irq.h
  * Copyright (C) 1996-1998 Russell King
  */
 
diff --git a/arch/arm/mach-shark/leds.c b/arch/arm/mach-shark/leds.c
index 5386a81f796a..b1896471aa3c 100644
--- a/arch/arm/mach-shark/leds.c
+++ b/arch/arm/mach-shark/leds.c
@@ -21,7 +21,7 @@
 #include <linux/spinlock.h>
 #include <linux/ioport.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/io.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index a7dd09436cbc..d75e795c893e 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -31,7 +31,7 @@
 
 #include <asm/cnt32_to_63.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
new file mode 100644
index 000000000000..b4ac00eacf68
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -0,0 +1,23 @@
+/* arch/arm/mach-versatile/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx,      #0x10000000
+		movne	\rx,      #0xf1000000	@ virtual base
+		orr	\rx, \rx, #0x001F0000
+		orr	\rx, \rx, #0x00001000
+		.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-versatile/include/mach/dma.h b/arch/arm/mach-versatile/include/mach/dma.h
new file mode 100644
index 000000000000..0aabf12c8834
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/dma.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *  Copyright (C) 1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S
new file mode 100644
index 000000000000..8c8020980585
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/entry-macro.S
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/mach-versatile/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Versatile platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/vic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr	\base, =IO_ADDRESS(VERSATILE_VIC_BASE)
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\irqstat, [\base, #VIC_IRQ_STATUS]	@ get masked status
+		mov	\irqnr, #0
+		teq	\irqstat, #0
+		beq	1003f
+
+1001:		tst	\irqstat, #15
+		bne	1002f
+		add	\irqnr, \irqnr, #4
+		movs	\irqstat, \irqstat, lsr #4
+		bne	1001b
+1002:		tst	\irqstat, #1
+		bne	1003f
+		add	\irqnr, \irqnr, #1
+		movs	\irqstat, \irqstat, lsr #1
+		bne	1002b
+1003:		/* EQ will be set if no irqs pending */
+
+@		clz	\irqnr, \irqstat
+@1003:		/* EQ will be set if we reach MAXIRQNUM */
+		.endm
+
diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h
new file mode 100644
index 000000000000..7aa906c93154
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/hardware.h
@@ -0,0 +1,52 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/hardware.h
+ *
+ *  This file contains the hardware definitions of the Versatile boards.
+ *
+ *  Copyright (C) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+#include <mach/platform.h>
+
+/*
+ * PCI space virtual addresses
+ */
+#define VERSATILE_PCI_VIRT_BASE		(void __iomem *)0xe8000000ul
+#define VERSATILE_PCI_CFG_VIRT_BASE	(void __iomem *)0xe9000000ul
+
+#if 0
+#define VERSATILE_PCI_VIRT_MEM_BASE0	0xf4000000
+#define VERSATILE_PCI_VIRT_MEM_BASE1	0xf5000000
+#define VERSATILE_PCI_VIRT_MEM_BASE2	0xf6000000
+
+#define PCIO_BASE			VERSATILE_PCI_VIRT_MEM_BASE0
+#define PCIMEM_BASE			VERSATILE_PCI_VIRT_MEM_BASE1
+#endif
+
+/* CIK guesswork */
+#define PCIBIOS_MIN_IO			0x44000000
+#define PCIBIOS_MIN_MEM			0x50000000
+
+#define pcibios_assign_all_busses()     1
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h
new file mode 100644
index 000000000000..c0b9dd1d0257
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/io.h
@@ -0,0 +1,32 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/io.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)	__io(a)
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/irqs.h b/arch/arm/mach-versatile/include/mach/irqs.h
new file mode 100644
index 000000000000..216a1312e62e
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/irqs.h
@@ -0,0 +1,211 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/irqs.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <mach/platform.h>
+
+/* 
+ *  IRQ interrupts definitions are the same as the INT definitions
+ *  held within platform.h
+ */
+#define IRQ_VIC_START		0
+#define IRQ_WDOGINT		(IRQ_VIC_START + INT_WDOGINT)
+#define IRQ_SOFTINT		(IRQ_VIC_START + INT_SOFTINT)
+#define IRQ_COMMRx		(IRQ_VIC_START + INT_COMMRx)
+#define IRQ_COMMTx		(IRQ_VIC_START + INT_COMMTx)
+#define IRQ_TIMERINT0_1		(IRQ_VIC_START + INT_TIMERINT0_1)
+#define IRQ_TIMERINT2_3		(IRQ_VIC_START + INT_TIMERINT2_3)
+#define IRQ_GPIOINT0		(IRQ_VIC_START + INT_GPIOINT0)
+#define IRQ_GPIOINT1		(IRQ_VIC_START + INT_GPIOINT1)
+#define IRQ_GPIOINT2		(IRQ_VIC_START + INT_GPIOINT2)
+#define IRQ_GPIOINT3		(IRQ_VIC_START + INT_GPIOINT3)
+#define IRQ_RTCINT		(IRQ_VIC_START + INT_RTCINT)
+#define IRQ_SSPINT		(IRQ_VIC_START + INT_SSPINT)
+#define IRQ_UARTINT0		(IRQ_VIC_START + INT_UARTINT0)
+#define IRQ_UARTINT1		(IRQ_VIC_START + INT_UARTINT1)
+#define IRQ_UARTINT2		(IRQ_VIC_START + INT_UARTINT2)
+#define IRQ_SCIINT		(IRQ_VIC_START + INT_SCIINT)
+#define IRQ_CLCDINT		(IRQ_VIC_START + INT_CLCDINT)
+#define IRQ_DMAINT		(IRQ_VIC_START + INT_DMAINT)
+#define IRQ_PWRFAILINT 		(IRQ_VIC_START + INT_PWRFAILINT)
+#define IRQ_MBXINT		(IRQ_VIC_START + INT_MBXINT)
+#define IRQ_GNDINT		(IRQ_VIC_START + INT_GNDINT)
+#define IRQ_VICSOURCE21		(IRQ_VIC_START + INT_VICSOURCE21)
+#define IRQ_VICSOURCE22		(IRQ_VIC_START + INT_VICSOURCE22)
+#define IRQ_VICSOURCE23		(IRQ_VIC_START + INT_VICSOURCE23)
+#define IRQ_VICSOURCE24		(IRQ_VIC_START + INT_VICSOURCE24)
+#define IRQ_VICSOURCE25		(IRQ_VIC_START + INT_VICSOURCE25)
+#define IRQ_VICSOURCE26		(IRQ_VIC_START + INT_VICSOURCE26)
+#define IRQ_VICSOURCE27		(IRQ_VIC_START + INT_VICSOURCE27)
+#define IRQ_VICSOURCE28		(IRQ_VIC_START + INT_VICSOURCE28)
+#define IRQ_VICSOURCE29		(IRQ_VIC_START + INT_VICSOURCE29)
+#define IRQ_VICSOURCE30		(IRQ_VIC_START + INT_VICSOURCE30)
+#define IRQ_VICSOURCE31		(IRQ_VIC_START + INT_VICSOURCE31)
+#define IRQ_VIC_END		(IRQ_VIC_START + 31)
+
+#define IRQMASK_WDOGINT		INTMASK_WDOGINT
+#define IRQMASK_SOFTINT		INTMASK_SOFTINT
+#define IRQMASK_COMMRx 		INTMASK_COMMRx
+#define IRQMASK_COMMTx 		INTMASK_COMMTx
+#define IRQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
+#define IRQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
+#define IRQMASK_GPIOINT0	INTMASK_GPIOINT0
+#define IRQMASK_GPIOINT1	INTMASK_GPIOINT1
+#define IRQMASK_GPIOINT2	INTMASK_GPIOINT2
+#define IRQMASK_GPIOINT3	INTMASK_GPIOINT3
+#define IRQMASK_RTCINT 		INTMASK_RTCINT
+#define IRQMASK_SSPINT 		INTMASK_SSPINT
+#define IRQMASK_UARTINT0	INTMASK_UARTINT0
+#define IRQMASK_UARTINT1	INTMASK_UARTINT1
+#define IRQMASK_UARTINT2	INTMASK_UARTINT2
+#define IRQMASK_SCIINT 		INTMASK_SCIINT
+#define IRQMASK_CLCDINT		INTMASK_CLCDINT
+#define IRQMASK_DMAINT 		INTMASK_DMAINT
+#define IRQMASK_PWRFAILINT	INTMASK_PWRFAILINT
+#define IRQMASK_MBXINT 		INTMASK_MBXINT
+#define IRQMASK_GNDINT 		INTMASK_GNDINT
+#define IRQMASK_VICSOURCE21	INTMASK_VICSOURCE21
+#define IRQMASK_VICSOURCE22	INTMASK_VICSOURCE22
+#define IRQMASK_VICSOURCE23	INTMASK_VICSOURCE23
+#define IRQMASK_VICSOURCE24	INTMASK_VICSOURCE24
+#define IRQMASK_VICSOURCE25	INTMASK_VICSOURCE25
+#define IRQMASK_VICSOURCE26	INTMASK_VICSOURCE26
+#define IRQMASK_VICSOURCE27	INTMASK_VICSOURCE27
+#define IRQMASK_VICSOURCE28	INTMASK_VICSOURCE28
+#define IRQMASK_VICSOURCE29	INTMASK_VICSOURCE29
+#define IRQMASK_VICSOURCE30	INTMASK_VICSOURCE30
+#define IRQMASK_VICSOURCE31	INTMASK_VICSOURCE31
+
+/* 
+ *  FIQ interrupts definitions are the same as the INT definitions.
+ */
+#define FIQ_WDOGINT		INT_WDOGINT
+#define FIQ_SOFTINT		INT_SOFTINT
+#define FIQ_COMMRx		INT_COMMRx
+#define FIQ_COMMTx		INT_COMMTx
+#define FIQ_TIMERINT0_1		INT_TIMERINT0_1
+#define FIQ_TIMERINT2_3		INT_TIMERINT2_3
+#define FIQ_GPIOINT0		INT_GPIOINT0
+#define FIQ_GPIOINT1		INT_GPIOINT1
+#define FIQ_GPIOINT2		INT_GPIOINT2
+#define FIQ_GPIOINT3		INT_GPIOINT3
+#define FIQ_RTCINT		INT_RTCINT
+#define FIQ_SSPINT		INT_SSPINT
+#define FIQ_UARTINT0		INT_UARTINT0
+#define FIQ_UARTINT1		INT_UARTINT1
+#define FIQ_UARTINT2		INT_UARTINT2
+#define FIQ_SCIINT		INT_SCIINT
+#define FIQ_CLCDINT		INT_CLCDINT
+#define FIQ_DMAINT		INT_DMAINT
+#define FIQ_PWRFAILINT 		INT_PWRFAILINT
+#define FIQ_MBXINT		INT_MBXINT
+#define FIQ_GNDINT		INT_GNDINT
+#define FIQ_VICSOURCE21		INT_VICSOURCE21
+#define FIQ_VICSOURCE22		INT_VICSOURCE22
+#define FIQ_VICSOURCE23		INT_VICSOURCE23
+#define FIQ_VICSOURCE24		INT_VICSOURCE24
+#define FIQ_VICSOURCE25		INT_VICSOURCE25
+#define FIQ_VICSOURCE26		INT_VICSOURCE26
+#define FIQ_VICSOURCE27		INT_VICSOURCE27
+#define FIQ_VICSOURCE28		INT_VICSOURCE28
+#define FIQ_VICSOURCE29		INT_VICSOURCE29
+#define FIQ_VICSOURCE30		INT_VICSOURCE30
+#define FIQ_VICSOURCE31		INT_VICSOURCE31
+
+
+#define FIQMASK_WDOGINT		INTMASK_WDOGINT
+#define FIQMASK_SOFTINT		INTMASK_SOFTINT
+#define FIQMASK_COMMRx 		INTMASK_COMMRx
+#define FIQMASK_COMMTx 		INTMASK_COMMTx
+#define FIQMASK_TIMERINT0_1	INTMASK_TIMERINT0_1
+#define FIQMASK_TIMERINT2_3	INTMASK_TIMERINT2_3
+#define FIQMASK_GPIOINT0	INTMASK_GPIOINT0
+#define FIQMASK_GPIOINT1	INTMASK_GPIOINT1
+#define FIQMASK_GPIOINT2	INTMASK_GPIOINT2
+#define FIQMASK_GPIOINT3	INTMASK_GPIOINT3
+#define FIQMASK_RTCINT 		INTMASK_RTCINT
+#define FIQMASK_SSPINT 		INTMASK_SSPINT
+#define FIQMASK_UARTINT0	INTMASK_UARTINT0
+#define FIQMASK_UARTINT1	INTMASK_UARTINT1
+#define FIQMASK_UARTINT2	INTMASK_UARTINT2
+#define FIQMASK_SCIINT 		INTMASK_SCIINT
+#define FIQMASK_CLCDINT		INTMASK_CLCDINT
+#define FIQMASK_DMAINT 		INTMASK_DMAINT
+#define FIQMASK_PWRFAILINT	INTMASK_PWRFAILINT
+#define FIQMASK_MBXINT 		INTMASK_MBXINT
+#define FIQMASK_GNDINT 		INTMASK_GNDINT
+#define FIQMASK_VICSOURCE21	INTMASK_VICSOURCE21
+#define FIQMASK_VICSOURCE22	INTMASK_VICSOURCE22
+#define FIQMASK_VICSOURCE23	INTMASK_VICSOURCE23
+#define FIQMASK_VICSOURCE24	INTMASK_VICSOURCE24
+#define FIQMASK_VICSOURCE25	INTMASK_VICSOURCE25
+#define FIQMASK_VICSOURCE26	INTMASK_VICSOURCE26
+#define FIQMASK_VICSOURCE27	INTMASK_VICSOURCE27
+#define FIQMASK_VICSOURCE28	INTMASK_VICSOURCE28
+#define FIQMASK_VICSOURCE29	INTMASK_VICSOURCE29
+#define FIQMASK_VICSOURCE30	INTMASK_VICSOURCE30
+#define FIQMASK_VICSOURCE31	INTMASK_VICSOURCE31
+
+/*
+ * Secondary interrupt controller
+ */
+#define IRQ_SIC_START		32
+#define IRQ_SIC_MMCI0B 		(IRQ_SIC_START + SIC_INT_MMCI0B)
+#define IRQ_SIC_MMCI1B 		(IRQ_SIC_START + SIC_INT_MMCI1B)
+#define IRQ_SIC_KMI0		(IRQ_SIC_START + SIC_INT_KMI0)
+#define IRQ_SIC_KMI1		(IRQ_SIC_START + SIC_INT_KMI1)
+#define IRQ_SIC_SCI3		(IRQ_SIC_START + SIC_INT_SCI3)
+#define IRQ_SIC_UART3		(IRQ_SIC_START + SIC_INT_UART3)
+#define IRQ_SIC_CLCD		(IRQ_SIC_START + SIC_INT_CLCD)
+#define IRQ_SIC_TOUCH		(IRQ_SIC_START + SIC_INT_TOUCH)
+#define IRQ_SIC_KEYPAD 		(IRQ_SIC_START + SIC_INT_KEYPAD)
+#define IRQ_SIC_DoC		(IRQ_SIC_START + SIC_INT_DoC)
+#define IRQ_SIC_MMCI0A 		(IRQ_SIC_START + SIC_INT_MMCI0A)
+#define IRQ_SIC_MMCI1A 		(IRQ_SIC_START + SIC_INT_MMCI1A)
+#define IRQ_SIC_AACI		(IRQ_SIC_START + SIC_INT_AACI)
+#define IRQ_SIC_ETH		(IRQ_SIC_START + SIC_INT_ETH)
+#define IRQ_SIC_USB		(IRQ_SIC_START + SIC_INT_USB)
+#define IRQ_SIC_PCI0		(IRQ_SIC_START + SIC_INT_PCI0)
+#define IRQ_SIC_PCI1		(IRQ_SIC_START + SIC_INT_PCI1)
+#define IRQ_SIC_PCI2		(IRQ_SIC_START + SIC_INT_PCI2)
+#define IRQ_SIC_PCI3		(IRQ_SIC_START + SIC_INT_PCI3)
+#define IRQ_SIC_END		63
+
+#define SIC_IRQMASK_MMCI0B	SIC_INTMASK_MMCI0B
+#define SIC_IRQMASK_MMCI1B	SIC_INTMASK_MMCI1B
+#define SIC_IRQMASK_KMI0	SIC_INTMASK_KMI0
+#define SIC_IRQMASK_KMI1	SIC_INTMASK_KMI1
+#define SIC_IRQMASK_SCI3	SIC_INTMASK_SCI3
+#define SIC_IRQMASK_UART3	SIC_INTMASK_UART3
+#define SIC_IRQMASK_CLCD	SIC_INTMASK_CLCD
+#define SIC_IRQMASK_TOUCH	SIC_INTMASK_TOUCH
+#define SIC_IRQMASK_KEYPAD	SIC_INTMASK_KEYPAD
+#define SIC_IRQMASK_DoC		SIC_INTMASK_DoC
+#define SIC_IRQMASK_MMCI0A	SIC_INTMASK_MMCI0A
+#define SIC_IRQMASK_MMCI1A	SIC_INTMASK_MMCI1A
+#define SIC_IRQMASK_AACI	SIC_INTMASK_AACI
+#define SIC_IRQMASK_ETH		SIC_INTMASK_ETH
+#define SIC_IRQMASK_USB		SIC_INTMASK_USB
+#define SIC_IRQMASK_PCI0	SIC_INTMASK_PCI0
+#define SIC_IRQMASK_PCI1	SIC_INTMASK_PCI1
+#define SIC_IRQMASK_PCI2	SIC_INTMASK_PCI2
+#define SIC_IRQMASK_PCI3	SIC_INTMASK_PCI3
+
+#define NR_IRQS			64
diff --git a/arch/arm/mach-versatile/include/mach/memory.h b/arch/arm/mach-versatile/include/mach/memory.h
new file mode 100644
index 000000000000..b6315c0602ac
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/memory.h
@@ -0,0 +1,38 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/memory.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	((x) - PAGE_OFFSET)
+#define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/platform.h b/arch/arm/mach-versatile/include/mach/platform.h
new file mode 100644
index 000000000000..27cbe6a3f220
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/platform.h
@@ -0,0 +1,510 @@
+/*
+ * arch/arm/mach-versatile/include/mach/platform.h
+ *
+ * Copyright (c) ARM Limited 2003.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __address_h
+#define __address_h                     1
+
+/*
+ * Memory definitions
+ */
+#define VERSATILE_BOOT_ROM_LO          0x30000000		/* DoC Base (64Mb)...*/
+#define VERSATILE_BOOT_ROM_HI          0x30000000
+#define VERSATILE_BOOT_ROM_BASE        VERSATILE_BOOT_ROM_HI	 /*  Normal position */
+#define VERSATILE_BOOT_ROM_SIZE        SZ_64M
+
+#define VERSATILE_SSRAM_BASE           /* VERSATILE_SSMC_BASE ? */
+#define VERSATILE_SSRAM_SIZE           SZ_2M
+
+#define VERSATILE_FLASH_BASE           0x34000000
+#define VERSATILE_FLASH_SIZE           SZ_64M
+
+/* 
+ *  SDRAM
+ */
+#define VERSATILE_SDRAM_BASE           0x00000000
+
+/* 
+ *  Logic expansion modules
+ * 
+ */
+
+
+/* ------------------------------------------------------------------------
+ *  Versatile Registers
+ * ------------------------------------------------------------------------
+ * 
+ */
+#define VERSATILE_SYS_ID_OFFSET               0x00
+#define VERSATILE_SYS_SW_OFFSET               0x04
+#define VERSATILE_SYS_LED_OFFSET              0x08
+#define VERSATILE_SYS_OSC0_OFFSET             0x0C
+
+#if defined(CONFIG_ARCH_VERSATILE_PB)
+#define VERSATILE_SYS_OSC1_OFFSET             0x10
+#define VERSATILE_SYS_OSC2_OFFSET             0x14
+#define VERSATILE_SYS_OSC3_OFFSET             0x18
+#define VERSATILE_SYS_OSC4_OFFSET             0x1C
+#elif defined(CONFIG_MACH_VERSATILE_AB)
+#define VERSATILE_SYS_OSC1_OFFSET             0x1C
+#endif
+
+#define VERSATILE_SYS_OSCCLCD_OFFSET          0x1c
+
+#define VERSATILE_SYS_LOCK_OFFSET             0x20
+#define VERSATILE_SYS_100HZ_OFFSET            0x24
+#define VERSATILE_SYS_CFGDATA1_OFFSET         0x28
+#define VERSATILE_SYS_CFGDATA2_OFFSET         0x2C
+#define VERSATILE_SYS_FLAGS_OFFSET            0x30
+#define VERSATILE_SYS_FLAGSSET_OFFSET         0x30
+#define VERSATILE_SYS_FLAGSCLR_OFFSET         0x34
+#define VERSATILE_SYS_NVFLAGS_OFFSET          0x38
+#define VERSATILE_SYS_NVFLAGSSET_OFFSET       0x38
+#define VERSATILE_SYS_NVFLAGSCLR_OFFSET       0x3C
+#define VERSATILE_SYS_RESETCTL_OFFSET         0x40
+#define VERSATILE_SYS_PCICTL_OFFSET           0x44
+#define VERSATILE_SYS_MCI_OFFSET              0x48
+#define VERSATILE_SYS_FLASH_OFFSET            0x4C
+#define VERSATILE_SYS_CLCD_OFFSET             0x50
+#define VERSATILE_SYS_CLCDSER_OFFSET          0x54
+#define VERSATILE_SYS_BOOTCS_OFFSET           0x58
+#define VERSATILE_SYS_24MHz_OFFSET            0x5C
+#define VERSATILE_SYS_MISC_OFFSET             0x60
+#define VERSATILE_SYS_TEST_OSC0_OFFSET        0x80
+#define VERSATILE_SYS_TEST_OSC1_OFFSET        0x84
+#define VERSATILE_SYS_TEST_OSC2_OFFSET        0x88
+#define VERSATILE_SYS_TEST_OSC3_OFFSET        0x8C
+#define VERSATILE_SYS_TEST_OSC4_OFFSET        0x90
+
+#define VERSATILE_SYS_BASE                    0x10000000
+#define VERSATILE_SYS_ID                      (VERSATILE_SYS_BASE + VERSATILE_SYS_ID_OFFSET)
+#define VERSATILE_SYS_SW                      (VERSATILE_SYS_BASE + VERSATILE_SYS_SW_OFFSET)
+#define VERSATILE_SYS_LED                     (VERSATILE_SYS_BASE + VERSATILE_SYS_LED_OFFSET)
+#define VERSATILE_SYS_OSC0                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC0_OFFSET)
+#define VERSATILE_SYS_OSC1                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC1_OFFSET)
+
+#if defined(CONFIG_ARCH_VERSATILE_PB)
+#define VERSATILE_SYS_OSC2                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC2_OFFSET)
+#define VERSATILE_SYS_OSC3                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC3_OFFSET)
+#define VERSATILE_SYS_OSC4                    (VERSATILE_SYS_BASE + VERSATILE_SYS_OSC4_OFFSET)
+#endif
+
+#define VERSATILE_SYS_LOCK                    (VERSATILE_SYS_BASE + VERSATILE_SYS_LOCK_OFFSET)
+#define VERSATILE_SYS_100HZ                   (VERSATILE_SYS_BASE + VERSATILE_SYS_100HZ_OFFSET)
+#define VERSATILE_SYS_CFGDATA1                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA1_OFFSET)
+#define VERSATILE_SYS_CFGDATA2                (VERSATILE_SYS_BASE + VERSATILE_SYS_CFGDATA2_OFFSET)
+#define VERSATILE_SYS_FLAGS                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGS_OFFSET)
+#define VERSATILE_SYS_FLAGSSET                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSSET_OFFSET)
+#define VERSATILE_SYS_FLAGSCLR                (VERSATILE_SYS_BASE + VERSATILE_SYS_FLAGSCLR_OFFSET)
+#define VERSATILE_SYS_NVFLAGS                 (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGS_OFFSET)
+#define VERSATILE_SYS_NVFLAGSSET              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSSET_OFFSET)
+#define VERSATILE_SYS_NVFLAGSCLR              (VERSATILE_SYS_BASE + VERSATILE_SYS_NVFLAGSCLR_OFFSET)
+#define VERSATILE_SYS_RESETCTL                (VERSATILE_SYS_BASE + VERSATILE_SYS_RESETCTL_OFFSET)
+#define VERSATILE_SYS_PCICTL                  (VERSATILE_SYS_BASE + VERSATILE_SYS_PCICTL_OFFSET)
+#define VERSATILE_SYS_MCI                     (VERSATILE_SYS_BASE + VERSATILE_SYS_MCI_OFFSET)
+#define VERSATILE_SYS_FLASH                   (VERSATILE_SYS_BASE + VERSATILE_SYS_FLASH_OFFSET)
+#define VERSATILE_SYS_CLCD                    (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCD_OFFSET)
+#define VERSATILE_SYS_CLCDSER                 (VERSATILE_SYS_BASE + VERSATILE_SYS_CLCDSER_OFFSET)
+#define VERSATILE_SYS_BOOTCS                  (VERSATILE_SYS_BASE + VERSATILE_SYS_BOOTCS_OFFSET)
+#define VERSATILE_SYS_24MHz                   (VERSATILE_SYS_BASE + VERSATILE_SYS_24MHz_OFFSET)
+#define VERSATILE_SYS_MISC                    (VERSATILE_SYS_BASE + VERSATILE_SYS_MISC_OFFSET)
+#define VERSATILE_SYS_TEST_OSC0               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC0_OFFSET)
+#define VERSATILE_SYS_TEST_OSC1               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC1_OFFSET)
+#define VERSATILE_SYS_TEST_OSC2               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC2_OFFSET)
+#define VERSATILE_SYS_TEST_OSC3               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC3_OFFSET)
+#define VERSATILE_SYS_TEST_OSC4               (VERSATILE_SYS_BASE + VERSATILE_SYS_TEST_OSC4_OFFSET)
+
+/* 
+ * Values for VERSATILE_SYS_RESET_CTRL
+ */
+#define VERSATILE_SYS_CTRL_RESET_CONFIGCLR    0x01
+#define VERSATILE_SYS_CTRL_RESET_CONFIGINIT   0x02
+#define VERSATILE_SYS_CTRL_RESET_DLLRESET     0x03
+#define VERSATILE_SYS_CTRL_RESET_PLLRESET     0x04
+#define VERSATILE_SYS_CTRL_RESET_POR          0x05
+#define VERSATILE_SYS_CTRL_RESET_DoC          0x06
+
+#define VERSATILE_SYS_CTRL_LED         (1 << 0)
+
+
+/* ------------------------------------------------------------------------
+ *  Versatile control registers
+ * ------------------------------------------------------------------------
+ */
+
+/* 
+ * VERSATILE_IDFIELD
+ *
+ * 31:24 = manufacturer (0x41 = ARM)
+ * 23:16 = architecture (0x08 = AHB system bus, ASB processor bus)
+ * 15:12 = FPGA (0x3 = XVC600 or XVC600E)
+ * 11:4  = build value
+ * 3:0   = revision number (0x1 = rev B (AHB))
+ */
+
+/*
+ * VERSATILE_SYS_LOCK
+ *     control access to SYS_OSCx, SYS_CFGDATAx, SYS_RESETCTL, 
+ *     SYS_CLD, SYS_BOOTCS
+ */
+#define VERSATILE_SYS_LOCK_LOCKED    (1 << 16)
+#define VERSATILE_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
+
+/*
+ * VERSATILE_SYS_FLASH
+ */
+#define VERSATILE_FLASHPROG_FLVPPEN	(1 << 0)	/* Enable writing to flash */
+
+/*
+ * VERSATILE_INTREG
+ *     - used to acknowledge and control MMCI and UART interrupts 
+ */
+#define VERSATILE_INTREG_WPROT        0x00    /* MMC protection status (no interrupt generated) */
+#define VERSATILE_INTREG_RI0          0x01    /* Ring indicator UART0 is asserted,              */
+#define VERSATILE_INTREG_CARDIN       0x08    /* MMCI card in detect                            */
+                                                /* write 1 to acknowledge and clear               */
+#define VERSATILE_INTREG_RI1          0x02    /* Ring indicator UART1 is asserted,              */
+#define VERSATILE_INTREG_CARDINSERT   0x03    /* Signal insertion of MMC card                   */
+
+/*
+ * VERSATILE peripheral addresses
+ */
+#define VERSATILE_PCI_CORE_BASE        0x10001000	/* PCI core control */
+#define VERSATILE_I2C_BASE             0x10002000	/* I2C control */
+#define VERSATILE_SIC_BASE             0x10003000	/* Secondary interrupt controller */
+#define VERSATILE_AACI_BASE            0x10004000	/* Audio */
+#define VERSATILE_MMCI0_BASE           0x10005000	/* MMC interface */
+#define VERSATILE_KMI0_BASE            0x10006000	/* KMI interface */
+#define VERSATILE_KMI1_BASE            0x10007000	/* KMI 2nd interface */
+#define VERSATILE_CHAR_LCD_BASE        0x10008000	/* Character LCD */
+#define VERSATILE_UART3_BASE           0x10009000	/* UART 3 */
+#define VERSATILE_SCI1_BASE            0x1000A000
+#define VERSATILE_MMCI1_BASE           0x1000B000    /* MMC Interface */
+	/* 0x1000C000 - 0x1000CFFF = reserved */
+#define VERSATILE_ETH_BASE             0x10010000	/* Ethernet */
+#define VERSATILE_USB_BASE             0x10020000	/* USB */
+	/* 0x10030000 - 0x100FFFFF = reserved */
+#define VERSATILE_SMC_BASE             0x10100000	/* SMC */
+#define VERSATILE_MPMC_BASE            0x10110000	/* MPMC */
+#define VERSATILE_CLCD_BASE            0x10120000	/* CLCD */
+#define VERSATILE_DMAC_BASE            0x10130000	/* DMA controller */
+#define VERSATILE_VIC_BASE             0x10140000	/* Vectored interrupt controller */
+#define VERSATILE_PERIPH_BASE          0x10150000    /* off-chip peripherals alias from */
+                                                /* 0x10000000 - 0x100FFFFF */
+#define VERSATILE_AHBM_BASE            0x101D0000	/* AHB monitor */
+#define VERSATILE_SCTL_BASE            0x101E0000	/* System controller */
+#define VERSATILE_WATCHDOG_BASE        0x101E1000	/* Watchdog */
+#define VERSATILE_TIMER0_1_BASE        0x101E2000	/* Timer 0 and 1 */
+#define VERSATILE_TIMER2_3_BASE        0x101E3000	/* Timer 2 and 3 */
+#define VERSATILE_GPIO0_BASE           0x101E4000	/* GPIO port 0 */
+#define VERSATILE_GPIO1_BASE           0x101E5000    /* GPIO port 1 */
+#define VERSATILE_GPIO2_BASE           0x101E6000	/* GPIO port 2 */
+#define VERSATILE_GPIO3_BASE           0x101E7000	/* GPIO port 3 */
+#define VERSATILE_RTC_BASE             0x101E8000	/* Real Time Clock */
+	/* 0x101E9000 - reserved */
+#define VERSATILE_SCI_BASE             0x101F0000	/* Smart card controller */
+#define VERSATILE_UART0_BASE           0x101F1000	/* Uart 0 */
+#define VERSATILE_UART1_BASE           0x101F2000	/* Uart 1 */
+#define VERSATILE_UART2_BASE           0x101F3000	/* Uart 2 */
+#define VERSATILE_SSP_BASE             0x101F4000	/* Synchronous Serial Port */
+
+#define VERSATILE_SSMC_BASE            0x20000000	/* SSMC */
+#define VERSATILE_IB2_BASE             0x24000000	/* IB2 module */
+#define VERSATILE_MBX_BASE             0x40000000	/* MBX */
+
+/* PCI space */
+#define VERSATILE_PCI_BASE             0x41000000	/* PCI Interface */
+#define VERSATILE_PCI_CFG_BASE	       0x42000000
+#define VERSATILE_PCI_MEM_BASE0        0x44000000
+#define VERSATILE_PCI_MEM_BASE1        0x50000000
+#define VERSATILE_PCI_MEM_BASE2        0x60000000
+/* Sizes of above maps */
+#define VERSATILE_PCI_BASE_SIZE	       0x01000000
+#define VERSATILE_PCI_CFG_BASE_SIZE    0x02000000
+#define VERSATILE_PCI_MEM_BASE0_SIZE   0x0c000000	/* 32Mb */
+#define VERSATILE_PCI_MEM_BASE1_SIZE   0x10000000	/* 256Mb */
+#define VERSATILE_PCI_MEM_BASE2_SIZE   0x10000000	/* 256Mb */
+
+#define VERSATILE_SDRAM67_BASE         0x70000000	/* SDRAM banks 6 and 7 */
+#define VERSATILE_LT_BASE              0x80000000	/* Logic Tile expansion */
+
+/*
+ * Disk on Chip
+ */
+#define VERSATILE_DOC_BASE             0x2C000000
+#define VERSATILE_DOC_SIZE             (16 << 20)
+#define VERSATILE_DOC_PAGE_SIZE        512
+#define VERSATILE_DOC_TOTAL_PAGES     (DOC_SIZE / PAGE_SIZE)
+
+#define ERASE_UNIT_PAGES    32
+#define START_PAGE          0x80
+
+/* 
+ *  LED settings, bits [7:0]
+ */
+#define VERSATILE_SYS_LED0             (1 << 0)
+#define VERSATILE_SYS_LED1             (1 << 1)
+#define VERSATILE_SYS_LED2             (1 << 2)
+#define VERSATILE_SYS_LED3             (1 << 3)
+#define VERSATILE_SYS_LED4             (1 << 4)
+#define VERSATILE_SYS_LED5             (1 << 5)
+#define VERSATILE_SYS_LED6             (1 << 6)
+#define VERSATILE_SYS_LED7             (1 << 7)
+
+#define ALL_LEDS                  0xFF
+
+#define LED_BANK                  VERSATILE_SYS_LED
+
+/* 
+ * Control registers
+ */
+#define VERSATILE_IDFIELD_OFFSET	0x0	/* Versatile build information */
+#define VERSATILE_FLASHPROG_OFFSET	0x4	/* Flash devices */
+#define VERSATILE_INTREG_OFFSET		0x8	/* Interrupt control */
+#define VERSATILE_DECODE_OFFSET		0xC	/* Fitted logic modules */
+
+
+/* ------------------------------------------------------------------------
+ *  Versatile Interrupt Controller - control registers
+ * ------------------------------------------------------------------------
+ * 
+ *  Offsets from interrupt controller base 
+ * 
+ *  System Controller interrupt controller base is
+ * 
+ * 	VERSATILE_IC_BASE
+ * 
+ *  Core Module interrupt controller base is
+ * 
+ * 	VERSATILE_SYS_IC 
+ * 
+ */
+/* VIC definitions in include/asm-arm/hardware/vic.h */
+
+#define SIC_IRQ_STATUS                  0
+#define SIC_IRQ_RAW_STATUS              0x04
+#define SIC_IRQ_ENABLE                  0x08
+#define SIC_IRQ_ENABLE_SET              0x08
+#define SIC_IRQ_ENABLE_CLEAR            0x0C
+#define SIC_INT_SOFT_SET                0x10
+#define SIC_INT_SOFT_CLEAR              0x14
+#define SIC_INT_PIC_ENABLE              0x20	/* read status of pass through mask */
+#define SIC_INT_PIC_ENABLES             0x20	/* set interrupt pass through bits */
+#define SIC_INT_PIC_ENABLEC             0x24	/* Clear interrupt pass through bits */
+
+/* ------------------------------------------------------------------------
+ *  Interrupts - bit assignment (primary)
+ * ------------------------------------------------------------------------
+ */
+
+#define INT_WDOGINT                     0	/* Watchdog timer */
+#define INT_SOFTINT                     1	/* Software interrupt */
+#define INT_COMMRx                      2	/* Debug Comm Rx interrupt */
+#define INT_COMMTx                      3	/* Debug Comm Tx interrupt */
+#define INT_TIMERINT0_1                 4	/* Timer 0 and 1 */
+#define INT_TIMERINT2_3                 5	/* Timer 2 and 3 */
+#define INT_GPIOINT0                    6	/* GPIO 0 */
+#define INT_GPIOINT1                    7	/* GPIO 1 */
+#define INT_GPIOINT2                    8	/* GPIO 2 */
+#define INT_GPIOINT3                    9	/* GPIO 3 */
+#define INT_RTCINT                      10	/* Real Time Clock */
+#define INT_SSPINT                      11	/* Synchronous Serial Port */
+#define INT_UARTINT0                    12	/* UART 0 on development chip */
+#define INT_UARTINT1                    13	/* UART 1 on development chip */
+#define INT_UARTINT2                    14	/* UART 2 on development chip */
+#define INT_SCIINT                      15	/* Smart Card Interface */
+#define INT_CLCDINT                     16	/* CLCD controller */
+#define INT_DMAINT                      17	/* DMA controller */
+#define INT_PWRFAILINT                  18	/* Power failure */
+#define INT_MBXINT                      19	/* Graphics processor */
+#define INT_GNDINT                      20	/* Reserved */
+	/* External interrupt signals from logic tiles or secondary controller */
+#define INT_VICSOURCE21                 21	/* Disk on Chip */
+#define INT_VICSOURCE22                 22	/* MCI0A */
+#define INT_VICSOURCE23                 23	/* MCI1A */
+#define INT_VICSOURCE24                 24	/* AACI */
+#define INT_VICSOURCE25                 25	/* Ethernet */
+#define INT_VICSOURCE26                 26	/* USB */
+#define INT_VICSOURCE27                 27	/* PCI 0 */
+#define INT_VICSOURCE28                 28	/* PCI 1 */
+#define INT_VICSOURCE29                 29	/* PCI 2 */
+#define INT_VICSOURCE30                 30	/* PCI 3 */
+#define INT_VICSOURCE31                 31	/* SIC source */
+
+/* 
+ *  Interrupt bit positions
+ * 
+ */
+#define INTMASK_WDOGINT                 (1 << INT_WDOGINT)
+#define INTMASK_SOFTINT                 (1 << INT_SOFTINT)
+#define INTMASK_COMMRx                  (1 << INT_COMMRx)
+#define INTMASK_COMMTx                  (1 << INT_COMMTx)
+#define INTMASK_TIMERINT0_1             (1 << INT_TIMERINT0_1)
+#define INTMASK_TIMERINT2_3             (1 << INT_TIMERINT2_3)
+#define INTMASK_GPIOINT0                (1 << INT_GPIOINT0)
+#define INTMASK_GPIOINT1                (1 << INT_GPIOINT1)
+#define INTMASK_GPIOINT2                (1 << INT_GPIOINT2)
+#define INTMASK_GPIOINT3                (1 << INT_GPIOINT3)
+#define INTMASK_RTCINT                  (1 << INT_RTCINT)
+#define INTMASK_SSPINT                  (1 << INT_SSPINT)
+#define INTMASK_UARTINT0                (1 << INT_UARTINT0)
+#define INTMASK_UARTINT1                (1 << INT_UARTINT1)
+#define INTMASK_UARTINT2                (1 << INT_UARTINT2)
+#define INTMASK_SCIINT                  (1 << INT_SCIINT)
+#define INTMASK_CLCDINT                 (1 << INT_CLCDINT)
+#define INTMASK_DMAINT                  (1 << INT_DMAINT)
+#define INTMASK_PWRFAILINT              (1 << INT_PWRFAILINT)
+#define INTMASK_MBXINT                  (1 << INT_MBXINT)
+#define INTMASK_GNDINT                  (1 << INT_GNDINT)
+#define INTMASK_VICSOURCE21             (1 << INT_VICSOURCE21)
+#define INTMASK_VICSOURCE22             (1 << INT_VICSOURCE22)
+#define INTMASK_VICSOURCE23             (1 << INT_VICSOURCE23)
+#define INTMASK_VICSOURCE24             (1 << INT_VICSOURCE24)
+#define INTMASK_VICSOURCE25             (1 << INT_VICSOURCE25)
+#define INTMASK_VICSOURCE26             (1 << INT_VICSOURCE26)
+#define INTMASK_VICSOURCE27             (1 << INT_VICSOURCE27)
+#define INTMASK_VICSOURCE28             (1 << INT_VICSOURCE28)
+#define INTMASK_VICSOURCE29             (1 << INT_VICSOURCE29)
+#define INTMASK_VICSOURCE30             (1 << INT_VICSOURCE30)
+#define INTMASK_VICSOURCE31             (1 << INT_VICSOURCE31)
+
+
+#define VERSATILE_SC_VALID_INT               0x003FFFFF
+
+#define MAXIRQNUM                       31
+#define MAXFIQNUM                       31
+#define MAXSWINUM                       31
+
+/* ------------------------------------------------------------------------
+ *  Interrupts - bit assignment (secondary)
+ * ------------------------------------------------------------------------
+ */
+#define SIC_INT_MMCI0B                  1	/* Multimedia Card 0B */
+#define SIC_INT_MMCI1B                  2	/* Multimedia Card 1B */
+#define SIC_INT_KMI0                    3	/* Keyboard/Mouse port 0 */
+#define SIC_INT_KMI1                    4	/* Keyboard/Mouse port 1 */
+#define SIC_INT_SCI3                    5	/* Smart Card interface */
+#define SIC_INT_UART3                   6	/* UART 3 empty or data available */
+#define SIC_INT_CLCD                    7	/* Character LCD */
+#define SIC_INT_TOUCH                   8	/* Touchscreen */
+#define SIC_INT_KEYPAD                  9	/* Key pressed on display keypad */
+	/* 10:20 - reserved */
+#define SIC_INT_DoC                     21	/* Disk on Chip memory controller */
+#define SIC_INT_MMCI0A                  22	/* MMC 0A */
+#define SIC_INT_MMCI1A                  23	/* MMC 1A */
+#define SIC_INT_AACI                    24	/* Audio Codec */
+#define SIC_INT_ETH                     25	/* Ethernet controller */
+#define SIC_INT_USB                     26	/* USB controller */
+#define SIC_INT_PCI0                    27
+#define SIC_INT_PCI1                    28
+#define SIC_INT_PCI2                    29
+#define SIC_INT_PCI3                    30
+
+
+#define SIC_INTMASK_MMCI0B              (1 << SIC_INT_MMCI0B)
+#define SIC_INTMASK_MMCI1B              (1 << SIC_INT_MMCI1B)
+#define SIC_INTMASK_KMI0                (1 << SIC_INT_KMI0)
+#define SIC_INTMASK_KMI1                (1 << SIC_INT_KMI1)
+#define SIC_INTMASK_SCI3                (1 << SIC_INT_SCI3)
+#define SIC_INTMASK_UART3               (1 << SIC_INT_UART3)
+#define SIC_INTMASK_CLCD                (1 << SIC_INT_CLCD)
+#define SIC_INTMASK_TOUCH               (1 << SIC_INT_TOUCH)
+#define SIC_INTMASK_KEYPAD              (1 << SIC_INT_KEYPAD)
+#define SIC_INTMASK_DoC                 (1 << SIC_INT_DoC)
+#define SIC_INTMASK_MMCI0A              (1 << SIC_INT_MMCI0A)
+#define SIC_INTMASK_MMCI1A              (1 << SIC_INT_MMCI1A)
+#define SIC_INTMASK_AACI                (1 << SIC_INT_AACI)
+#define SIC_INTMASK_ETH                 (1 << SIC_INT_ETH)
+#define SIC_INTMASK_USB                 (1 << SIC_INT_USB)
+#define SIC_INTMASK_PCI0                (1 << SIC_INT_PCI0)
+#define SIC_INTMASK_PCI1                (1 << SIC_INT_PCI1)
+#define SIC_INTMASK_PCI2                (1 << SIC_INT_PCI2)
+#define SIC_INTMASK_PCI3                (1 << SIC_INT_PCI3)
+/* 
+ *  Application Flash
+ * 
+ */
+#define FLASH_BASE                      VERSATILE_FLASH_BASE
+#define FLASH_SIZE                      VERSATILE_FLASH_SIZE
+#define FLASH_END                       (FLASH_BASE + FLASH_SIZE - 1)
+#define FLASH_BLOCK_SIZE                SZ_128K
+
+/* 
+ *  Boot Flash
+ * 
+ */
+#define EPROM_BASE                      VERSATILE_BOOT_ROM_HI
+#define EPROM_SIZE                      VERSATILE_BOOT_ROM_SIZE
+#define EPROM_END                       (EPROM_BASE + EPROM_SIZE - 1)
+
+/* 
+ *  Clean base - dummy
+ * 
+ */
+#define CLEAN_BASE                      EPROM_BASE
+
+/*
+ * System controller bit assignment
+ */
+#define VERSATILE_REFCLK	0
+#define VERSATILE_TIMCLK	1
+
+#define VERSATILE_TIMER1_EnSel	15
+#define VERSATILE_TIMER2_EnSel	17
+#define VERSATILE_TIMER3_EnSel	19
+#define VERSATILE_TIMER4_EnSel	21
+
+
+#define MAX_TIMER                       2
+#define MAX_PERIOD                      699050
+#define TICKS_PER_uSEC                  1
+
+/* 
+ *  These are useconds NOT ticks.  
+ * 
+ */
+#define mSEC_1                          1000
+#define mSEC_5                          (mSEC_1 * 5)
+#define mSEC_10                         (mSEC_1 * 10)
+#define mSEC_25                         (mSEC_1 * 25)
+#define SEC_1                           (mSEC_1 * 1000)
+
+#define VERSATILE_CSR_BASE             0x10000000
+#define VERSATILE_CSR_SIZE             0x10000000
+
+#ifdef CONFIG_MACH_VERSATILE_AB
+/*
+ * IB2 Versatile/AB expansion board definitions
+ */
+#define VERSATILE_IB2_CAMERA_BANK	VERSATILE_IB2_BASE
+#define VERSATILE_IB2_KBD_DATAREG	(VERSATILE_IB2_BASE + 0x01000000)
+
+/* VICINTSOURCE27 */
+#define VERSATILE_IB2_INT_BASE		(VERSATILE_IB2_BASE + 0x02000000)
+#define VERSATILE_IB2_IER		(VERSATILE_IB2_INT_BASE + 0)
+#define VERSATILE_IB2_ISR		(VERSATILE_IB2_INT_BASE + 4)
+
+#define VERSATILE_IB2_CTL_BASE		(VERSATILE_IB2_BASE + 0x03000000)
+#define VERSATILE_IB2_CTRL		(VERSATILE_IB2_CTL_BASE + 0)
+#define VERSATILE_IB2_STAT		(VERSATILE_IB2_CTL_BASE + 4)
+#endif
+
+#endif
+
+/* 	END */
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
new file mode 100644
index 000000000000..91fa559c7cca
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/system.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/hardware.h>
+#include <asm/io.h>
+#include <mach/platform.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	u32 val;
+
+	val = __raw_readl(IO_ADDRESS(VERSATILE_SYS_RESETCTL)) & ~0x7;
+	val |= 0x105;
+
+	__raw_writel(0xa05f, IO_ADDRESS(VERSATILE_SYS_LOCK));
+	__raw_writel(val, IO_ADDRESS(VERSATILE_SYS_RESETCTL));
+	__raw_writel(0, IO_ADDRESS(VERSATILE_SYS_LOCK));
+}
+
+#endif
diff --git a/arch/arm/mach-versatile/include/mach/timex.h b/arch/arm/mach-versatile/include/mach/timex.h
new file mode 100644
index 000000000000..426199b1add5
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/timex.h
@@ -0,0 +1,23 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/timex.h
+ *
+ *  Versatile architecture timex specifications
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#define CLOCK_TICK_RATE		(50000000 / 16)
diff --git a/arch/arm/mach-versatile/include/mach/uncompress.h b/arch/arm/mach-versatile/include/mach/uncompress.h
new file mode 100644
index 000000000000..3dd0048afb34
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/uncompress.h
@@ -0,0 +1,46 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/uncompress.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define AMBA_UART_DR	(*(volatile unsigned char *)0x101F1000)
+#define AMBA_UART_LCRH	(*(volatile unsigned char *)0x101F102C)
+#define AMBA_UART_CR	(*(volatile unsigned char *)0x101F1030)
+#define AMBA_UART_FR	(*(volatile unsigned char *)0x101F1018)
+
+/*
+ * This does not append a newline
+ */
+static inline void putc(int c)
+{
+	while (AMBA_UART_FR & (1 << 5))
+		barrier();
+
+	AMBA_UART_DR = c;
+}
+
+static inline void flush(void)
+{
+	while (AMBA_UART_FR & (1 << 3))
+		barrier();
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-versatile/include/mach/vmalloc.h b/arch/arm/mach-versatile/include/mach/vmalloc.h
new file mode 100644
index 000000000000..427e3612db5d
--- /dev/null
+++ b/arch/arm/mach-versatile/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/mach-versatile/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2003 ARM Limited
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END		(PAGE_OFFSET + 0x18000000)
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
index ca8290159432..36f23f896503 100644
--- a/arch/arm/mach-versatile/pci.c
+++ b/arch/arm/mach-versatile/pci.c
@@ -22,7 +22,7 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index b257ef78ef45..76375c64413a 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index be439bb9d450..1725f019fc85 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -24,7 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 3a6c8ec34cd9..ed15f876c725 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -187,7 +187,7 @@ config CPU_ARM926T
 		ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \
 		ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \
 		ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \
-		ARCH_NS9XXX || ARCH_DAVINCI
+		ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2
 	default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || \
 		ARCH_OMAP730 || ARCH_OMAP16XX || \
 		ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \
@@ -742,3 +742,11 @@ config CACHE_L2X0
 	select OUTER_CACHE
 	help
 	  This option enables the L2x0 PrimeCell.
+
+config CACHE_XSC3L2
+	bool "Enable the L2 cache on XScale3"
+	depends on CPU_XSC3
+	default y
+	select OUTER_CACHE
+	help
+	  This option enables the L2 cache on XScale3.
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index f64b92557b11..2e27a8c8372b 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -76,3 +76,5 @@ obj-$(CONFIG_CPU_V7)		+= proc-v7.o
 
 obj-$(CONFIG_CACHE_FEROCEON_L2)	+= cache-feroceon-l2.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
+obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
+
diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S
index e1994788cf0e..3b3639eb7ca5 100644
--- a/arch/arm/mm/cache-v3.S
+++ b/arch/arm/mm/cache-v3.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index b2908063ed6a..33926c9fcda6 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -9,7 +9,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index 9bcabd86c6f3..51a9b0b273b6 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -13,7 +13,7 @@
  */
 #include <linux/linkage.h>
 #include <linux/init.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/page.h>
 #include "proc-macros.S"
 
diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c
new file mode 100644
index 000000000000..158bd96763d3
--- /dev/null
+++ b/arch/arm/mm/cache-xsc3l2.c
@@ -0,0 +1,182 @@
+/*
+ * arch/arm/mm/cache-xsc3l2.c - XScale3 L2 cache controller support
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/init.h>
+#include <linux/spinlock.h>
+
+#include <asm/system.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+#define CR_L2	(1 << 26)
+
+#define CACHE_LINE_SIZE		32
+#define CACHE_LINE_SHIFT	5
+#define CACHE_WAY_PER_SET	8
+
+#define CACHE_WAY_SIZE(l2ctype)	(8192 << (((l2ctype) >> 8) & 0xf))
+#define CACHE_SET_SIZE(l2ctype)	(CACHE_WAY_SIZE(l2ctype) >> CACHE_LINE_SHIFT)
+
+static inline int xsc3_l2_present(void)
+{
+	unsigned long l2ctype;
+
+	__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
+
+	return !!(l2ctype & 0xf8);
+}
+
+static inline void xsc3_l2_clean_mva(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c11, 1" : : "r" (addr));
+}
+
+static inline void xsc3_l2_clean_pa(unsigned long addr)
+{
+	xsc3_l2_clean_mva(__phys_to_virt(addr));
+}
+
+static inline void xsc3_l2_inv_mva(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c7, 1" : : "r" (addr));
+}
+
+static inline void xsc3_l2_inv_pa(unsigned long addr)
+{
+	xsc3_l2_inv_mva(__phys_to_virt(addr));
+}
+
+static inline void xsc3_l2_inv_all(void)
+{
+	unsigned long l2ctype, set_way;
+	int set, way;
+
+	__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
+
+	for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) {
+		for (way = 0; way < CACHE_WAY_PER_SET; way++) {
+			set_way = (way << 29) | (set << 5);
+			__asm__("mcr p15, 1, %0, c7, c11, 2" : : "r"(set_way));
+		}
+	}
+
+	dsb();
+}
+
+static void xsc3_l2_inv_range(unsigned long start, unsigned long end)
+{
+	if (start == 0 && end == -1ul) {
+		xsc3_l2_inv_all();
+		return;
+	}
+
+	/*
+	 * Clean and invalidate partial first cache line.
+	 */
+	if (start & (CACHE_LINE_SIZE - 1)) {
+		xsc3_l2_clean_pa(start & ~(CACHE_LINE_SIZE - 1));
+		xsc3_l2_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+		start = (start | (CACHE_LINE_SIZE - 1)) + 1;
+	}
+
+	/*
+	 * Clean and invalidate partial last cache line.
+	 */
+	if (end & (CACHE_LINE_SIZE - 1)) {
+		xsc3_l2_clean_pa(end & ~(CACHE_LINE_SIZE - 1));
+		xsc3_l2_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
+		end &= ~(CACHE_LINE_SIZE - 1);
+	}
+
+	/*
+	 * Invalidate all full cache lines between 'start' and 'end'.
+	 */
+	while (start != end) {
+		xsc3_l2_inv_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+static void xsc3_l2_clean_range(unsigned long start, unsigned long end)
+{
+	start &= ~(CACHE_LINE_SIZE - 1);
+	while (start < end) {
+		xsc3_l2_clean_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+/*
+ * optimize L2 flush all operation by set/way format
+ */
+static inline void xsc3_l2_flush_all(void)
+{
+	unsigned long l2ctype, set_way;
+	int set, way;
+
+	__asm__("mrc p15, 1, %0, c0, c0, 1" : "=r" (l2ctype));
+
+	for (set = 0; set < CACHE_SET_SIZE(l2ctype); set++) {
+		for (way = 0; way < CACHE_WAY_PER_SET; way++) {
+			set_way = (way << 29) | (set << 5);
+			__asm__("mcr p15, 1, %0, c7, c15, 2" : : "r"(set_way));
+		}
+	}
+
+	dsb();
+}
+
+static void xsc3_l2_flush_range(unsigned long start, unsigned long end)
+{
+	if (start == 0 && end == -1ul) {
+		xsc3_l2_flush_all();
+		return;
+	}
+
+	start &= ~(CACHE_LINE_SIZE - 1);
+	while (start < end) {
+		xsc3_l2_clean_pa(start);
+		xsc3_l2_inv_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+static int __init xsc3_l2_init(void)
+{
+	if (!cpu_is_xsc3() || !xsc3_l2_present())
+		return 0;
+
+	if (!(get_cr() & CR_L2)) {
+		pr_info("XScale3 L2 cache enabled.\n");
+		adjust_cr(CR_L2, CR_L2);
+		xsc3_l2_inv_all();
+	}
+
+	outer_cache.inv_range = xsc3_l2_inv_range;
+	outer_cache.clean_range = xsc3_l2_clean_range;
+	outer_cache.flush_range = xsc3_l2_flush_range;
+
+	return 0;
+}
+core_initcall(xsc3_l2_init);
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index 333a82a3717e..db7b3e38ef1d 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -274,6 +274,11 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 void *
 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
 {
+	void *memory;
+
+	if (dma_alloc_from_coherent(dev, size, handle, &memory))
+		return memory;
+
 	if (arch_is_coherent()) {
 		void *virt;
 
@@ -362,6 +367,9 @@ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr
 
 	WARN_ON(irqs_disabled());
 
+	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+		return;
+
 	if (arch_is_coherent()) {
 		kfree(cpu_addr);
 		return;
diff --git a/arch/arm/mm/discontig.c b/arch/arm/mm/discontig.c
index 1e5602189507..c8c0c4b0f0a3 100644
--- a/arch/arm/mm/discontig.c
+++ b/arch/arm/mm/discontig.c
@@ -21,26 +21,24 @@
  * Our node_data structure for discontiguous memory.
  */
 
-static bootmem_data_t node_bootmem_data[MAX_NUMNODES];
-
 pg_data_t discontig_node_data[MAX_NUMNODES] = {
-  { .bdata = &node_bootmem_data[0] },
-  { .bdata = &node_bootmem_data[1] },
-  { .bdata = &node_bootmem_data[2] },
-  { .bdata = &node_bootmem_data[3] },
+  { .bdata = &bootmem_node_data[0] },
+  { .bdata = &bootmem_node_data[1] },
+  { .bdata = &bootmem_node_data[2] },
+  { .bdata = &bootmem_node_data[3] },
 #if MAX_NUMNODES == 16
-  { .bdata = &node_bootmem_data[4] },
-  { .bdata = &node_bootmem_data[5] },
-  { .bdata = &node_bootmem_data[6] },
-  { .bdata = &node_bootmem_data[7] },
-  { .bdata = &node_bootmem_data[8] },
-  { .bdata = &node_bootmem_data[9] },
-  { .bdata = &node_bootmem_data[10] },
-  { .bdata = &node_bootmem_data[11] },
-  { .bdata = &node_bootmem_data[12] },
-  { .bdata = &node_bootmem_data[13] },
-  { .bdata = &node_bootmem_data[14] },
-  { .bdata = &node_bootmem_data[15] },
+  { .bdata = &bootmem_node_data[4] },
+  { .bdata = &bootmem_node_data[5] },
+  { .bdata = &bootmem_node_data[6] },
+  { .bdata = &bootmem_node_data[7] },
+  { .bdata = &bootmem_node_data[8] },
+  { .bdata = &bootmem_node_data[9] },
+  { .bdata = &bootmem_node_data[10] },
+  { .bdata = &bootmem_node_data[11] },
+  { .bdata = &bootmem_node_data[12] },
+  { .bdata = &bootmem_node_data[13] },
+  { .bdata = &bootmem_node_data[14] },
+  { .bdata = &bootmem_node_data[15] },
 #endif
 };
 
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index fbfa26058442..a8ec97b4752e 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -37,7 +37,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
 	pgd_t *pgd;
 	pmd_t *pmd;
 	pte_t *pte, entry;
-	int ret = 0;
+	int ret;
 
 	pgd = pgd_offset(vma->vm_mm, address);
 	if (pgd_none(*pgd))
@@ -55,15 +55,19 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address)
 	entry = *pte;
 
 	/*
+	 * If this page is present, it's actually being shared.
+	 */
+	ret = pte_present(entry);
+
+	/*
 	 * If this page isn't present, or is already setup to
 	 * fault (ie, is old), we can safely ignore any issues.
 	 */
-	if (pte_present(entry) && pte_val(entry) & shared_pte_mask) {
+	if (ret && pte_val(entry) & shared_pte_mask) {
 		flush_cache_page(vma, address, pte_pfn(entry));
 		pte_val(entry) &= ~shared_pte_mask;
 		set_pte_at(vma->vm_mm, address, pte, entry);
 		flush_tlb_page(vma, address);
-		ret = 1;
 	}
 	pte_unmap(pte);
 	return ret;
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index b657f1719af0..30a69d67d673 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -156,9 +156,9 @@ static int __init check_initrd(struct meminfo *mi)
 	}
 
 	if (initrd_node == -1) {
-		printk(KERN_ERR "initrd (0x%08lx - 0x%08lx) extends beyond "
+		printk(KERN_ERR "INITRD: 0x%08lx+0x%08lx extends beyond "
 		       "physical memory - disabling initrd\n",
-		       phys_initrd_start, end);
+		       phys_initrd_start, phys_initrd_size);
 		phys_initrd_start = phys_initrd_size = 0;
 	}
 #endif
@@ -239,25 +239,33 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 	reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
 			     boot_pages << PAGE_SHIFT, BOOTMEM_DEFAULT);
 
+	/*
+	 * Reserve any special node zero regions.
+	 */
+	if (node == 0)
+		reserve_node_zero(pgdat);
+
 #ifdef CONFIG_BLK_DEV_INITRD
 	/*
 	 * If the initrd is in this node, reserve its memory.
 	 */
 	if (node == initrd_node) {
-		reserve_bootmem_node(pgdat, phys_initrd_start,
-				     phys_initrd_size, BOOTMEM_DEFAULT);
-		initrd_start = __phys_to_virt(phys_initrd_start);
-		initrd_end = initrd_start + phys_initrd_size;
+		int res = reserve_bootmem_node(pgdat, phys_initrd_start,
+				     phys_initrd_size, BOOTMEM_EXCLUSIVE);
+
+		if (res == 0) {
+			initrd_start = __phys_to_virt(phys_initrd_start);
+			initrd_end = initrd_start + phys_initrd_size;
+		} else {
+			printk(KERN_ERR
+				"INITRD: 0x%08lx+0x%08lx overlaps in-use "
+				"memory region - disabling initrd\n",
+				phys_initrd_start, phys_initrd_size);
+		}
 	}
 #endif
 
 	/*
-	 * Finally, reserve any node zero regions.
-	 */
-	if (node == 0)
-		reserve_node_zero(pgdat);
-
-	/*
 	 * initialise the zones within this node.
 	 */
 	memset(zone_size, 0, sizeof(zone_size));
@@ -284,7 +292,7 @@ bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
 	 */
 	arch_adjust_zones(node, zone_size, zhole_size);
 
-	free_area_init_node(node, pgdat, zone_size, start_pfn, zhole_size);
+	free_area_init_node(node, zone_size, start_pfn, zhole_size);
 
 	return end_pfn;
 }
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 303a7ff6bfd2..b81dbf9ffb77 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -259,7 +259,7 @@ remap_area_supersections(unsigned long virt, unsigned long pfn,
  * caller shouldn't need to know that small detail.
  *
  * 'flags' are the extra L_PTE_ flags that you want to specify for this
- * mapping.  See include/asm-arm/proc-armv/pgtable.h for more information.
+ * mapping.  See <asm/pgtable.h> for more information.
  */
 void __iomem *
 __arm_ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index d64f8e6f75ab..eda733d30455 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -231,7 +231,7 @@ cpu_arm720_name:
 		.align
 
 /*
- * See linux/include/asm-arm/procinfo.h for a definition of this structure.
+ * See <asm/procinfo.h> for a definition of this structure.
  */
 	
 		.section ".proc.info.init", #alloc, #execinstr
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 9818195dbf11..bbe10576c861 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -18,7 +18,7 @@
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/elf.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index c5fe27ad2892..871ba018252e 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -23,7 +23,7 @@
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/elf.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/pgtable.h>
 
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 3533741a76f6..7bd9e7197f60 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -28,7 +28,7 @@
 #include <linux/init.h>
 #include <asm/assembler.h>
 #include <asm/elf.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/pgtable.h>
 #include <asm/pgtable-hwdef.h>
 #include <asm/page.h>
@@ -52,11 +52,6 @@
 #define CACHESIZE	32768
 
 /*
- * Run with L2 enabled.
- */
-#define L2_CACHE_ENABLE	1
-
-/*
  * This macro is used to wait for a CP15 write and is needed when we
  * have to ensure that the last operation to the coprocessor was
  * completed before continuing with operation.
@@ -265,12 +260,9 @@ ENTRY(xsc3_dma_inv_range)
 	tst	r0, #CACHELINESIZE - 1
 	bic	r0, r0, #CACHELINESIZE - 1
 	mcrne	p15, 0, r0, c7, c10, 1		@ clean L1 D line
-	mcrne	p15, 1, r0, c7, c11, 1		@ clean L2 line
 	tst	r1, #CACHELINESIZE - 1
 	mcrne	p15, 0, r1, c7, c10, 1		@ clean L1 D line
-	mcrne	p15, 1, r1, c7, c11, 1		@ clean L2 line
 1:	mcr	p15, 0, r0, c7, c6, 1		@ invalidate L1 D line
-	mcr	p15, 1, r0, c7, c7, 1		@ invalidate L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
@@ -288,7 +280,6 @@ ENTRY(xsc3_dma_inv_range)
 ENTRY(xsc3_dma_clean_range)
 	bic	r0, r0, #CACHELINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
-	mcr	p15, 1, r0, c7, c11, 1		@ clean L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
@@ -306,8 +297,6 @@ ENTRY(xsc3_dma_clean_range)
 ENTRY(xsc3_dma_flush_range)
 	bic	r0, r0, #CACHELINESIZE - 1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean/invalidate L1 D line
-	mcr	p15, 1, r0, c7, c11, 1		@ clean L2 line
-	mcr	p15, 1, r0, c7, c7, 1		@ invalidate L2 line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
 	blo	1b
@@ -347,9 +336,7 @@ ENTRY(cpu_xsc3_switch_mm)
 	mcr	p15, 0, ip, c7, c5, 0		@ invalidate L1 I cache and BTB
 	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
 	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
-#ifdef L2_CACHE_ENABLE
 	orr	r0, r0, #0x18			@ cache the page table in L2
-#endif
 	mcr	p15, 0, r0, c2, c0, 0		@ load page table pointer
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
 	cpwait_ret lr, ip
@@ -378,12 +365,10 @@ ENTRY(cpu_xsc3_set_pte_ext)
 	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
 						@ combined with user -> user r/w
 
-#if L2_CACHE_ENABLE
 	@ If it's cacheable, it needs to be in L2 also.
 	eor	ip, r1, #L_PTE_CACHEABLE
 	tst	ip, #L_PTE_CACHEABLE
 	orreq	r2, r2, #PTE_EXT_TEX(0x5)
-#endif
 
 	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
 	movne	r2, #0				@ no -> fault
@@ -408,9 +393,7 @@ __xsc3_setup:
 	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
 	mcr	p15, 0, ip, c7, c5, 4		@ prefetch flush
 	mcr	p15, 0, ip, c8, c7, 0		@ invalidate I and D TLBs
-#if L2_CACHE_ENABLE
 	orr	r4, r4, #0x18			@ cache the page table in L2
-#endif
 	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
 
 	mov	r0, #0				@ don't allow CP access
@@ -418,9 +401,7 @@ __xsc3_setup:
 
 	mrc	p15, 0, r0, c1, c0, 1		@ get auxiliary control reg
 	and	r0, r0, #2			@ preserve bit P bit setting
-#if L2_CACHE_ENABLE
 	orr	r0, r0, #(1 << 10)		@ enable L2 for LLR cache
-#endif
 	mcr	p15, 0, r0, c1, c0, 1		@ set auxiliary control reg
 
 	adr	r5, xsc3_crval
@@ -429,9 +410,6 @@ __xsc3_setup:
 	bic	r0, r0, r5			@ ..V. ..R. .... ..A.
 	orr	r0, r0, r6			@ ..VI Z..S .... .C.M (mmu)
 						@ ...I Z..S .... .... (uc)
-#if L2_CACHE_ENABLE
-	orr 	r0, r0, #0x04000000		@ L2 enable
-#endif
 	mov	pc, lr
 
 	.size	__xsc3_setup, . - __xsc3_setup
diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h
index 4a4d02c09112..386cbd13eaf4 100644
--- a/arch/arm/nwfpe/fpa11.h
+++ b/arch/arm/nwfpe/fpa11.h
@@ -69,7 +69,7 @@ typedef union tagFPREG {
  * This structure is exported to user space.  Do not re-order.
  * Only add new stuff to the end, and do not change the size of
  * any element.  Elements of this structure are used by user
- * space, and must match struct user_fp in include/asm-arm/user.h.
+ * space, and must match struct user_fp in <asm/user.h>.
  * We include the byte offsets below for documentation purposes.
  *
  * The size of this structure and FPREG are checked by fpmodule.c
diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c
index 74fae6045650..92db6e035c65 100644
--- a/arch/arm/oprofile/op_model_mpcore.c
+++ b/arch/arm/oprofile/op_model_mpcore.c
@@ -40,7 +40,7 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 
 #include "op_counter.h"
@@ -201,7 +201,7 @@ static int em_call_function(int (*fn)(void))
 	data.ret = 0;
 
 	preempt_disable();
-	smp_call_function(em_func, &data, 1, 1);
+	smp_call_function(em_func, &data, 1);
 	em_func(&data);
 	preempt_enable();
 
diff --git a/arch/arm/plat-iop/adma.c b/arch/arm/plat-iop/adma.c
index 53c5e9a52eb1..f72420821619 100644
--- a/arch/arm/plat-iop/adma.c
+++ b/arch/arm/plat-iop/adma.c
@@ -19,7 +19,7 @@
 #include <linux/platform_device.h>
 #include <asm/hardware/iop3xx.h>
 #include <linux/dma-mapping.h>
-#include <asm/arch/adma.h>
+#include <mach/adma.h>
 #include <asm/hardware/iop_adma.h>
 
 #ifdef CONFIG_ARCH_IOP32X
diff --git a/arch/arm/plat-iop/i2c.c b/arch/arm/plat-iop/i2c.c
index e99909bdba71..6dcbcc4ad419 100644
--- a/arch/arm/plat-iop/i2c.c
+++ b/arch/arm/plat-iop/i2c.c
@@ -25,9 +25,8 @@
 #include <asm/setup.h>
 #include <asm/system.h>
 #include <asm/memory.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/hardware/iop3xx.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #ifdef CONFIG_ARCH_IOP32X
diff --git a/arch/arm/plat-iop/io.c b/arch/arm/plat-iop/io.c
index 498675d028d0..39dcfb4bdc71 100644
--- a/arch/arm/plat-iop/io.c
+++ b/arch/arm/plat-iop/io.c
@@ -18,7 +18,7 @@
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 void * __iomem __iop3xx_ioremap(unsigned long cookie, size_t size,
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index d9bc15a69e5d..54708bf9cb15 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -21,10 +21,9 @@
 #include <asm/irq.h>
 #include <asm/signal.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/pci.h>
 #include <asm/hardware/iop3xx.h>
-#include <asm/mach-types.h>
 
 // #define DEBUG
 
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 6fe481ff4fdf..c53fefb6aac4 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -18,13 +18,13 @@
 #include <linux/time.h>
 #include <linux/init.h>
 #include <linux/timex.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/time.h>
+#include <mach/time.h>
 
 static unsigned long ticks_per_jiffy;
 static unsigned long ticks_per_usec;
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 1aa86fd60d71..2f8627218839 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -39,7 +39,7 @@
 #include <linux/string.h>
 #include <linux/version.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index 4a7736717d86..733e0acac916 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -23,7 +23,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm-generic/bug.h>
 
 static struct mxc_gpio_port *mxc_gpio_ports;
@@ -73,19 +73,19 @@ static int gpio_set_irq_type(u32 irq, u32 type)
 	void __iomem *reg = port->base;
 
 	switch (type) {
-	case IRQT_RISING:
+	case IRQ_TYPE_EDGE_RISING:
 		edge = GPIO_INT_RISE_EDGE;
 		break;
-	case IRQT_FALLING:
+	case IRQ_TYPE_EDGE_FALLING:
 		edge = GPIO_INT_FALL_EDGE;
 		break;
-	case IRQT_LOW:
+	case IRQ_TYPE_LEVEL_LOW:
 		edge = GPIO_INT_LOW_LEV;
 		break;
-	case IRQT_HIGH:
+	case IRQ_TYPE_LEVEL_HIGH:
 		edge = GPIO_INT_HIGH_LEV;
 		break;
-	default:	/* this includes IRQT_BOTHEDGE */
+	default:	/* this includes IRQ_TYPE_EDGE_BOTH */
 		return -EINVAL;
 	}
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
new file mode 100644
index 000000000000..61e66dac90ef
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -0,0 +1,354 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX27ADS_H__
+
+/* external interrupt multiplexer */
+#define MXC_EXP_IO_BASE		(MXC_GPIO_BASE + MXC_MAX_GPIO_LINES)
+
+#define MXC_VIRTUAL_INTS_BASE	(MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES)
+#define MXC_SDIO1_CARD_IRQ	MXC_VIRTUAL_INTS_BASE
+#define MXC_SDIO2_CARD_IRQ	(MXC_VIRTUAL_INTS_BASE + 1)
+#define MXC_SDIO3_CARD_IRQ	(MXC_VIRTUAL_INTS_BASE + 2)
+
+#define MXC_MAX_BOARD_INTS      (MXC_MAX_EXP_IO_LINES + \
+				MXC_MAX_VIRTUAL_INTS)
+
+/*
+ * MXC UART EVB board level configurations
+ */
+
+#define MXC_LL_EXTUART_PADDR	(CS4_BASE_ADDR + 0x20000)
+#define MXC_LL_EXTUART_VADDR	(CS4_BASE_ADDR_VIRT + 0x20000)
+#define MXC_LL_EXTUART_16BIT_BUS
+
+#define MXC_LL_UART_PADDR       UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
+
+/*
+ * @name Memory Size parameters
+ */
+
+/*
+ * Size of SDRAM memory
+ */
+#define SDRAM_MEM_SIZE          SZ_128M
+
+/*
+ * PBC Controller parameters
+ */
+
+/*
+ * Base address of PBC controller, CS4
+ */
+#define PBC_BASE_ADDRESS        0xEB000000
+#define PBC_REG_ADDR(offset)    (PBC_BASE_ADDRESS + (offset))
+
+/*
+ * PBC Interupt name definitions
+ */
+#define PBC_GPIO1_0  0
+#define PBC_GPIO1_1  1
+#define PBC_GPIO1_2  2
+#define PBC_GPIO1_3  3
+#define PBC_GPIO1_4  4
+#define PBC_GPIO1_5  5
+
+#define PBC_INTR_MAX_NUM 6
+#define PBC_INTR_SHARED_MAX_NUM 8
+
+/* When the PBC address connection is fixed in h/w, defined as 1 */
+#define PBC_ADDR_SH             0
+
+/* Offsets for the PBC Controller register */
+/*
+ * PBC Board version register offset
+ */
+#define PBC_VERSION_REG         PBC_REG_ADDR(0x00000 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 set address.
+ */
+#define PBC_BCTRL1_SET_REG      PBC_REG_ADDR(0x00008 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 1 clear address.
+ */
+#define PBC_BCTRL1_CLEAR_REG    PBC_REG_ADDR(0x0000C >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 2 set address.
+ */
+#define PBC_BCTRL2_SET_REG      PBC_REG_ADDR(0x00010 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 2 clear address.
+ */
+#define PBC_BCTRL2_CLEAR_REG    PBC_REG_ADDR(0x00014 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 3 set address.
+ */
+#define PBC_BCTRL3_SET_REG      PBC_REG_ADDR(0x00018 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 3 clear address.
+ */
+#define PBC_BCTRL3_CLEAR_REG    PBC_REG_ADDR(0x0001C >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 3 set address.
+ */
+#define PBC_BCTRL4_SET_REG      PBC_REG_ADDR(0x00020 >> PBC_ADDR_SH)
+/*
+ * PBC Board control register 4 clear address.
+ */
+#define PBC_BCTRL4_CLEAR_REG    PBC_REG_ADDR(0x00024 >> PBC_ADDR_SH)
+/*PBC_ADDR_SH
+ * PBC Board status register 1.
+ */
+#define PBC_BSTAT1_REG          PBC_REG_ADDR(0x00028 >> PBC_ADDR_SH)
+/*
+ * PBC Board interrupt status register.
+ */
+#define PBC_INTSTATUS_REG       PBC_REG_ADDR(0x0002C >> PBC_ADDR_SH)
+/*
+ * PBC Board interrupt current status register.
+ */
+#define PBC_INTCURR_STATUS_REG  PBC_REG_ADDR(0x00034 >> PBC_ADDR_SH)
+/*
+ * PBC Interrupt mask register set address.
+ */
+#define PBC_INTMASK_SET_REG     PBC_REG_ADDR(0x00038 >> PBC_ADDR_SH)
+/*
+ * PBC Interrupt mask register clear address.
+ */
+#define PBC_INTMASK_CLEAR_REG   PBC_REG_ADDR(0x0003C >> PBC_ADDR_SH)
+/*
+ * External UART A.
+ */
+#define PBC_SC16C652_UARTA_REG  PBC_REG_ADDR(0x20000 >> PBC_ADDR_SH)
+/*
+ * UART 4 Expanding Signal Status.
+ */
+#define PBC_UART_STATUS_REG     PBC_REG_ADDR(0x22000 >> PBC_ADDR_SH)
+/*
+ * UART 4 Expanding Signal Control Set.
+ */
+#define PBC_UCTRL_SET_REG       PBC_REG_ADDR(0x24000 >> PBC_ADDR_SH)
+/*
+ * UART 4 Expanding Signal Control Clear.
+ */
+#define PBC_UCTRL_CLR_REG       PBC_REG_ADDR(0x26000 >> PBC_ADDR_SH)
+/*
+ * Ethernet Controller IO base address.
+ */
+#define PBC_CS8900A_IOBASE_REG  PBC_REG_ADDR(0x40000 >> PBC_ADDR_SH)
+/*
+ * Ethernet Controller Memory base address.
+ */
+#define PBC_CS8900A_MEMBASE_REG PBC_REG_ADDR(0x42000 >> PBC_ADDR_SH)
+/*
+ * Ethernet Controller DMA base address.
+ */
+#define PBC_CS8900A_DMABASE_REG PBC_REG_ADDR(0x44000 >> PBC_ADDR_SH)
+
+/* PBC Board Version Register bit definition */
+#define PBC_VERSION_ADS         0x8000	/* Bit15=1 means version for ads */
+#define PBC_VERSION_EVB_REVB    0x4000	/* BIT14=1 means version for evb revb */
+
+/* PBC Board Control Register 1 bit definitions */
+#define PBC_BCTRL1_ERST         0x0001	/* Ethernet Reset */
+#define PBC_BCTRL1_URST         0x0002	/* Reset External UART controller */
+#define PBC_BCTRL1_FRST         0x0004	/* FEC Reset */
+#define PBC_BCTRL1_ESLEEP       0x0010	/* Enable ethernet Sleep */
+#define PBC_BCTRL1_LCDON        0x0800	/* Enable the LCD */
+
+/* PBC Board Control Register 2 bit definitions */
+#define PBC_BCTRL2_VCC_EN       0x0004	/*   Enable VCC */
+#define PBC_BCTRL2_VPP_EN       0x0008	/*   Enable Vpp */
+#define PBC_BCTRL2_ATAFEC_EN    0X0010
+#define PBC_BCTRL2_ATAFEC_SEL   0X0020
+#define PBC_BCTRL2_ATA_EN       0X0040
+#define PBC_BCTRL2_IRDA_SD      0X0080
+#define PBC_BCTRL2_IRDA_EN      0X0100
+#define PBC_BCTRL2_CCTL10       0X0200
+#define PBC_BCTRL2_CCTL11       0X0400
+
+/* PBC Board Control Register 3 bit definitions */
+#define PBC_BCTRL3_HSH_EN       0X0020
+#define PBC_BCTRL3_FSH_MOD      0X0040
+#define PBC_BCTRL3_OTG_HS_EN    0X0080
+#define PBC_BCTRL3_OTG_VBUS_EN  0X0100
+#define PBC_BCTRL3_FSH_VBUS_EN  0X0200
+#define PBC_BCTRL3_USB_OTG_ON   0X0800
+#define PBC_BCTRL3_USB_FSH_ON   0X1000
+
+/* PBC Board Control Register 4 bit definitions */
+#define PBC_BCTRL4_REGEN_SEL    0X0001
+#define PBC_BCTRL4_USER_OFF     0X0002
+#define PBC_BCTRL4_VIB_EN       0X0004
+#define PBC_BCTRL4_PWRGT1_EN    0X0008
+#define PBC_BCTRL4_PWRGT2_EN    0X0010
+#define PBC_BCTRL4_STDBY_PRI    0X0020
+
+#ifndef __ASSEMBLY__
+/*
+ * Enumerations for SD cards and memory stick card. This corresponds to
+ * the card EN bits in the IMR: SD1_EN | MS_EN | SD3_EN | SD2_EN.
+ */
+enum mxc_card_no {
+	MXC_CARD_SD2 = 0,
+	MXC_CARD_SD3,
+	MXC_CARD_MS,
+	MXC_CARD_SD1,
+	MXC_CARD_MIN = MXC_CARD_SD2,
+	MXC_CARD_MAX = MXC_CARD_SD1,
+};
+#endif
+
+#define MXC_CPLD_VER_1_50       0x01
+
+/*
+ * PBC BSTAT Register bit definitions
+ */
+#define PBC_BSTAT_PRI_INT       0X0001
+#define PBC_BSTAT_USB_BYP       0X0002
+#define PBC_BSTAT_ATA_IOCS16    0X0004
+#define PBC_BSTAT_ATA_CBLID     0X0008
+#define PBC_BSTAT_ATA_DASP      0X0010
+#define PBC_BSTAT_PWR_RDY       0X0020
+#define PBC_BSTAT_SD3_WP        0X0100
+#define PBC_BSTAT_SD2_WP        0X0200
+#define PBC_BSTAT_SD1_WP        0X0400
+#define PBC_BSTAT_SD3_DET       0X0800
+#define PBC_BSTAT_SD2_DET       0X1000
+#define PBC_BSTAT_SD1_DET       0X2000
+#define PBC_BSTAT_MS_DET        0X4000
+#define PBC_BSTAT_SD3_DET_BIT   11
+#define PBC_BSTAT_SD2_DET_BIT   12
+#define PBC_BSTAT_SD1_DET_BIT   13
+#define PBC_BSTAT_MS_DET_BIT    14
+#define MXC_BSTAT_BIT(n)        ((n == MXC_CARD_SD2) ? PBC_BSTAT_SD2_DET : \
+				 ((n == MXC_CARD_SD3) ? PBC_BSTAT_SD3_DET : \
+				 ((n == MXC_CARD_SD1) ? PBC_BSTAT_SD1_DET : \
+				 ((n == MXC_CARD_MS) ? PBC_BSTAT_MS_DET : \
+					0x0))))
+
+/*
+ * PBC UART Control Register bit definitions
+ */
+#define PBC_UCTRL_DCE_DCD       0X0001
+#define PBC_UCTRL_DCE_DSR       0X0002
+#define PBC_UCTRL_DCE_RI        0X0004
+#define PBC_UCTRL_DTE_DTR       0X0100
+
+/*
+ * PBC UART Status Register bit definitions
+ */
+#define PBC_USTAT_DTE_DCD       0X0001
+#define PBC_USTAT_DTE_DSR       0X0002
+#define PBC_USTAT_DTE_RI        0X0004
+#define PBC_USTAT_DCE_DTR       0X0100
+
+/*
+ * PBC Interupt mask register bit definitions
+ */
+#define PBC_INTR_SD3_R_EN_BIT   4
+#define PBC_INTR_SD2_R_EN_BIT   0
+#define PBC_INTR_SD1_R_EN_BIT   6
+#define PBC_INTR_MS_R_EN_BIT    5
+#define PBC_INTR_SD3_EN_BIT     13
+#define PBC_INTR_SD2_EN_BIT     12
+#define PBC_INTR_MS_EN_BIT      14
+#define PBC_INTR_SD1_EN_BIT     15
+
+#define PBC_INTR_SD2_R_EN       0x0001
+#define PBC_INTR_LOW_BAT        0X0002
+#define PBC_INTR_OTG_FSOVER     0X0004
+#define PBC_INTR_FSH_OVER       0X0008
+#define PBC_INTR_SD3_R_EN       0x0010
+#define PBC_INTR_MS_R_EN        0x0020
+#define PBC_INTR_SD1_R_EN       0x0040
+#define PBC_INTR_FEC_INT        0X0080
+#define PBC_INTR_ENET_INT       0X0100
+#define PBC_INTR_OTGFS_INT      0X0200
+#define PBC_INTR_XUART_INT      0X0400
+#define PBC_INTR_CCTL12         0X0800
+#define PBC_INTR_SD2_EN         0x1000
+#define PBC_INTR_SD3_EN         0x2000
+#define PBC_INTR_MS_EN          0x4000
+#define PBC_INTR_SD1_EN         0x8000
+
+
+
+/* For interrupts like xuart, enet etc */
+#define EXPIO_PARENT_INT        IOMUX_TO_IRQ(MX27_PIN_TIN)
+#define MXC_MAX_EXP_IO_LINES    16
+
+/*
+ * This corresponds to PBC_INTMASK_SET_REG at offset 0x38.
+ *
+ */
+#define EXPIO_INT_LOW_BAT       (MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_OTG_FS_OVR    (MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_FSH_OVR       (MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_RES4          (MXC_EXP_IO_BASE + 4)
+#define EXPIO_INT_RES5          (MXC_EXP_IO_BASE + 5)
+#define EXPIO_INT_RES6          (MXC_EXP_IO_BASE + 6)
+#define EXPIO_INT_FEC           (MXC_EXP_IO_BASE + 7)
+#define EXPIO_INT_ENET_INT      (MXC_EXP_IO_BASE + 8)
+#define EXPIO_INT_OTG_FS_INT    (MXC_EXP_IO_BASE + 9)
+#define EXPIO_INT_XUART_INTA    (MXC_EXP_IO_BASE + 10)
+#define EXPIO_INT_CCTL12_INT    (MXC_EXP_IO_BASE + 11)
+#define EXPIO_INT_SD2_EN        (MXC_EXP_IO_BASE + 12)
+#define EXPIO_INT_SD3_EN        (MXC_EXP_IO_BASE + 13)
+#define EXPIO_INT_MS_EN         (MXC_EXP_IO_BASE + 14)
+#define EXPIO_INT_SD1_EN        (MXC_EXP_IO_BASE + 15)
+
+/*
+ * This is System IRQ used by CS8900A for interrupt generation
+ * taken from platform.h
+ */
+#define CS8900AIRQ              EXPIO_INT_ENET_INT
+/* This is I/O Base address used to access registers of CS8900A on MXC ADS */
+#define CS8900A_BASE_ADDRESS    (PBC_CS8900A_IOBASE_REG + 0x300)
+
+#define MXC_PMIC_INT_LINE       IOMUX_TO_IRQ(MX27_PIN_TOUT)
+
+/*
+* This is used to detect if the CPLD version is for mx27 evb board rev-a
+*/
+#define PBC_CPLD_VERSION_IS_REVA() \
+	((__raw_readw(PBC_VERSION_REG) & \
+	(PBC_VERSION_ADS | PBC_VERSION_EVB_REVB))\
+	== 0)
+
+/* This is used to active or inactive ata signal in CPLD .
+ *  It is dependent with hardware
+ */
+#define PBC_ATA_SIGNAL_ACTIVE() \
+	__raw_writew(           \
+		PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
+		PBC_BCTRL2_CLEAR_REG)
+
+#define PBC_ATA_SIGNAL_INACTIVE() \
+	__raw_writew(  \
+		PBC_BCTRL2_ATAFEC_EN|PBC_BCTRL2_ATAFEC_SEL|PBC_BCTRL2_ATA_EN, \
+		PBC_BCTRL2_SET_REG)
+
+#define MXC_BD_LED1             (1 << 5)
+#define MXC_BD_LED2             (1 << 6)
+#define MXC_BD_LED_ON(led) \
+	__raw_writew(led, PBC_BCTRL1_SET_REG)
+#define MXC_BD_LED_OFF(led) \
+	__raw_writew(led, PBC_BCTRL1_CLEAR_REG)
+
+/* to determine the correct external crystal reference */
+#define CKIH_27MHZ_BIT_SET      (1 << 3)
+
+#endif				/* __ASM_ARCH_MXC_BOARD_MX27ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31ads.h b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
new file mode 100644
index 000000000000..1bc6fb0f9a83
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31ads.h
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX31ADS_H__
+
+/* Base address of PBC controller */
+#define PBC_BASE_ADDRESS        IO_ADDRESS(CS4_BASE_ADDR)
+/* Offsets for the PBC Controller register */
+
+/* PBC Board status register offset */
+#define PBC_BSTAT               0x000002
+
+/* PBC Board control register 1 set address */
+#define PBC_BCTRL1_SET          0x000004
+
+/* PBC Board control register 1 clear address */
+#define PBC_BCTRL1_CLEAR        0x000006
+
+/* PBC Board control register 2 set address */
+#define PBC_BCTRL2_SET          0x000008
+
+/* PBC Board control register 2 clear address */
+#define PBC_BCTRL2_CLEAR        0x00000A
+
+/* PBC Board control register 3 set address */
+#define PBC_BCTRL3_SET          0x00000C
+
+/* PBC Board control register 3 clear address */
+#define PBC_BCTRL3_CLEAR        0x00000E
+
+/* PBC Board control register 4 set address */
+#define PBC_BCTRL4_SET          0x000010
+
+/* PBC Board control register 4 clear address */
+#define PBC_BCTRL4_CLEAR        0x000012
+
+/* PBC Board status register 1 */
+#define PBC_BSTAT1              0x000014
+
+/* PBC Board interrupt status register */
+#define PBC_INTSTATUS           0x000016
+
+/* PBC Board interrupt current status register */
+#define PBC_INTCURR_STATUS      0x000018
+
+/* PBC Interrupt mask register set address */
+#define PBC_INTMASK_SET         0x00001A
+
+/* PBC Interrupt mask register clear address */
+#define PBC_INTMASK_CLEAR       0x00001C
+
+/* External UART A */
+#define PBC_SC16C652_UARTA      0x010000
+
+/* External UART B */
+#define PBC_SC16C652_UARTB      0x010010
+
+/* Ethernet Controller IO base address */
+#define PBC_CS8900A_IOBASE      0x020000
+
+/* Ethernet Controller Memory base address */
+#define PBC_CS8900A_MEMBASE     0x021000
+
+/* Ethernet Controller DMA base address */
+#define PBC_CS8900A_DMABASE     0x022000
+
+/* External chip select 0 */
+#define PBC_XCS0                0x040000
+
+/* LCD Display enable */
+#define PBC_LCD_EN_B            0x060000
+
+/* Code test debug enable */
+#define PBC_CODE_B              0x070000
+
+/* PSRAM memory select */
+#define PBC_PSRAM_B             0x5000000
+
+#define PBC_INTSTATUS_REG	(PBC_INTSTATUS + PBC_BASE_ADDRESS)
+#define PBC_INTCURR_STATUS_REG	(PBC_INTCURR_STATUS + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_SET_REG	(PBC_INTMASK_SET + PBC_BASE_ADDRESS)
+#define PBC_INTMASK_CLEAR_REG	(PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS)
+#define EXPIO_PARENT_INT	IOMUX_TO_IRQ(MX31_PIN_GPIO1_4)
+
+#define EXPIO_INT_LOW_BAT	(MXC_EXP_IO_BASE + 0)
+#define EXPIO_INT_PB_IRQ	(MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_OTG_FS_OVR	(MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_FSH_OVR	(MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_RES4		(MXC_EXP_IO_BASE + 4)
+#define EXPIO_INT_RES5		(MXC_EXP_IO_BASE + 5)
+#define EXPIO_INT_RES6		(MXC_EXP_IO_BASE + 6)
+#define EXPIO_INT_RES7		(MXC_EXP_IO_BASE + 7)
+#define EXPIO_INT_ENET_INT	(MXC_EXP_IO_BASE + 8)
+#define EXPIO_INT_OTG_FS_INT	(MXC_EXP_IO_BASE + 9)
+#define EXPIO_INT_XUART_INTA	(MXC_EXP_IO_BASE + 10)
+#define EXPIO_INT_XUART_INTB	(MXC_EXP_IO_BASE + 11)
+#define EXPIO_INT_SYNTH_IRQ	(MXC_EXP_IO_BASE + 12)
+#define EXPIO_INT_CE_INT1	(MXC_EXP_IO_BASE + 13)
+#define EXPIO_INT_CE_INT2	(MXC_EXP_IO_BASE + 14)
+#define EXPIO_INT_RES15		(MXC_EXP_IO_BASE + 15)
+
+#define MXC_MAX_EXP_IO_LINES	16
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
new file mode 100644
index 000000000000..e4e5cf5ad7db
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+
+#define MXC_MAX_EXP_IO_LINES	16
+
+
+/*
+ * Memory Size parameters
+ */
+
+/*
+ * Size of SDRAM memory
+ */
+#define SDRAM_MEM_SIZE		SZ_128M
+/*
+ * Size of MBX buffer memory
+ */
+#define MXC_MBX_MEM_SIZE	SZ_16M
+/*
+ * Size of memory available to kernel
+ */
+#define MEM_SIZE		(SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE)
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
+
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm037.h b/arch/arm/plat-mxc/include/mach/board-pcm037.h
new file mode 100644
index 000000000000..82232ba3c8fc
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-pcm037.h
@@ -0,0 +1,27 @@
+/*
+ *  Copyright (C) 2008 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
+#define __ASM_ARCH_MXC_BOARD_PCM037_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_PCM037_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/board-pcm038.h b/arch/arm/plat-mxc/include/mach/board-pcm038.h
new file mode 100644
index 000000000000..750c62afd90f
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-pcm038.h
@@ -0,0 +1,41 @@
+/*
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
+#define __ASM_ARCH_MXC_BOARD_PCM038_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	(AIPI_BASE_ADDR_VIRT + 0x0A000)
+
+#ifndef __ASSEMBLY__
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own baseboard init function and call it from
+ * inside pcm038_init().
+ *
+ * This example here is for the development board. Refer pcm970-baseboard.c
+ */
+
+extern void pcm970_baseboard_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_PCM038_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
new file mode 100644
index 000000000000..24caa2b7c91d
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/clock.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_CLOCK_H__
+#define __ASM_ARCH_MXC_CLOCK_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/list.h>
+
+struct module;
+
+struct clk {
+	struct list_head node;
+	struct module *owner;
+	const char *name;
+	int id;
+	/* Source clock this clk depends on */
+	struct clk *parent;
+	/* Secondary clock to enable/disable with this clock */
+	struct clk *secondary;
+	/* Reference count of clock enable/disable */
+	__s8 usecount;
+	/* Register bit position for clock's enable/disable control. */
+	u8 enable_shift;
+	/* Register address for clock's enable/disable control. */
+	u32 enable_reg;
+	u32 flags;
+	/* get the current clock rate (always a fresh value) */
+	unsigned long (*get_rate) (struct clk *);
+	/* Function ptr to set the clock to a new rate. The rate must match a
+	   supported rate returned from round_rate. Leave blank if clock is not
+	   programmable */
+	int (*set_rate) (struct clk *, unsigned long);
+	/* Function ptr to round the requested clock rate to the nearest
+	   supported rate that is less than or equal to the requested rate. */
+	unsigned long (*round_rate) (struct clk *, unsigned long);
+	/* Function ptr to enable the clock. Leave blank if clock can not
+	   be gated. */
+	int (*enable) (struct clk *);
+	/* Function ptr to disable the clock. Leave blank if clock can not
+	   be gated. */
+	void (*disable) (struct clk *);
+	/* Function ptr to set the parent clock of the clock. */
+	int (*set_parent) (struct clk *, struct clk *);
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_ARCH_MXC_CLOCK_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
new file mode 100644
index 000000000000..a6d2e24aab15
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_COMMON_H__
+#define __ASM_ARCH_MXC_COMMON_H__
+
+extern void mxc_map_io(void);
+extern void mxc_init_irq(void);
+extern void mxc_timer_init(const char *clk_timer);
+extern int mxc_clocks_init(unsigned long fref);
+extern int mxc_register_gpios(void);
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
new file mode 100644
index 000000000000..b9907bebba3b
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -0,0 +1,49 @@
+/* arch/arm/mach-imx/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/hardware.h>
+
+#ifdef CONFIG_MACH_MX31ADS
+#include <mach/board-mx31ads.h>
+#endif
+#ifdef CONFIG_MACH_PCM037
+#include <mach/board-pcm037.h>
+#endif
+#ifdef CONFIG_MACH_MX31LITE
+#include <mach/board-mx31lite.h>
+#endif
+#ifdef CONFIG_MACH_MX27ADS
+#include <mach/board-mx27ads.h>
+#endif
+#ifdef CONFIG_MACH_PCM038
+#include <mach/board-pcm038.h>
+#endif
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		ldreq	\rx, =MXC_LL_UART_PADDR	@ physical
+		ldrne	\rx, =MXC_LL_UART_VADDR	@ virtual
+		.endm
+
+		.macro	senduart,rd,rx
+		str	\rd, [\rx, #0x40]	@ TXDATA
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
+
+		.macro	busyuart,rd,rx
+1002:		ldr	\rd, [\rx, #0x98]	@ SR2
+		tst	\rd, #1 << 3		@ TXDC
+		beq	1002b			@ wait until transmit done
+		.endm
diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h
new file mode 100644
index 000000000000..c822d569a05e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/dma.h
@@ -0,0 +1,14 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_DMA_H__
+#define __ASM_ARCH_MXC_DMA_H__
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
new file mode 100644
index 000000000000..b542433afb1b
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ *  Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+	@ this macro disables fast irq (not implemented)
+	.macro	disable_fiq
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	@ this macro checks which interrupt occured
+	@ and returns its number in irqnr
+	@ and returns if an interrupt occured in irqstat
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\base, =AVIC_IO_ADDRESS(AVIC_BASE_ADDR)
+	@ Load offset & priority of the highest priority
+	@ interrupt pending from AVIC_NIVECSR
+	ldr	\irqstat, [\base, #0x40]
+	@ Shift to get the decoded IRQ number, using ASR so
+	@ 'no interrupt pending' becomes 0xffffffff
+	mov	\irqnr, \irqstat, asr #16
+	@ set zero flag if IRQ + 1 == 0
+	adds	\tmp, \irqnr, #1
+	.endm
+
+	@ irq priority table (not used)
+	.macro	irq_prio_table
+	.endm
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
new file mode 100644
index 000000000000..65eedc0d196f
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_GPIO_H__
+#define __ASM_ARCH_MXC_GPIO_H__
+
+#include <mach/hardware.h>
+#include <asm-generic/gpio.h>
+
+/* use gpiolib dispatchers */
+#define gpio_get_value		__gpio_get_value
+#define gpio_set_value		__gpio_set_value
+#define gpio_cansleep		__gpio_cansleep
+
+#define gpio_to_irq(gpio)	(MXC_MAX_INT_LINES + (gpio))
+#define irq_to_gpio(irq)	((irq) - MXC_MAX_INT_LINES)
+
+struct mxc_gpio_port {
+	void __iomem *base;
+	int irq;
+	int virtual_irq_start;
+	struct gpio_chip chip;
+};
+
+int mxc_gpio_init(struct mxc_gpio_port*, int);
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
new file mode 100644
index 000000000000..3caadeeda701
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#define __ASM_ARCH_MXC_HARDWARE_H__
+
+#include <asm/sizes.h>
+
+#ifdef CONFIG_ARCH_MX3
+# include <mach/mx31.h>
+#endif
+
+#ifdef CONFIG_ARCH_MX2
+# ifdef CONFIG_MACH_MX27
+#  include <mach/mx27.h>
+# endif
+#endif
+
+#include <mach/mxc.h>
+
+#endif /* __ASM_ARCH_MXC_HARDWARE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/iim.h b/arch/arm/plat-mxc/include/mach/iim.h
new file mode 100644
index 000000000000..315bffadafda
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iim.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_IIM_H__
+#define __ASM_ARCH_MXC_IIM_H__
+
+/* Register offsets */
+#define MXC_IIMSTAT             0x0000
+#define MXC_IIMSTATM            0x0004
+#define MXC_IIMERR              0x0008
+#define MXC_IIMEMASK            0x000C
+#define MXC_IIMFCTL             0x0010
+#define MXC_IIMUA               0x0014
+#define MXC_IIMLA               0x0018
+#define MXC_IIMSDAT             0x001C
+#define MXC_IIMPREV             0x0020
+#define MXC_IIMSREV             0x0024
+#define MXC_IIMPRG_P            0x0028
+#define MXC_IIMSCS0             0x002C
+#define MXC_IIMSCS1             0x0030
+#define MXC_IIMSCS2             0x0034
+#define MXC_IIMSCS3             0x0038
+#define MXC_IIMFBAC0            0x0800
+#define MXC_IIMJAC              0x0804
+#define MXC_IIMHWV1             0x0808
+#define MXC_IIMHWV2             0x080C
+#define MXC_IIMHAB0             0x0810
+#define MXC_IIMHAB1             0x0814
+/* Definitions for i.MX27 TO2 */
+#define MXC_IIMMAC              0x0814
+#define MXC_IIMPREV_FUSE        0x0818
+#define MXC_IIMSREV_FUSE        0x081C
+#define MXC_IIMSJC_CHALL_0      0x0820
+#define MXC_IIMSJC_CHALL_7      0x083C
+#define MXC_IIMFB0UC17          0x0840
+#define MXC_IIMFB0UC255         0x0BFC
+#define MXC_IIMFBAC1            0x0C00
+/* Definitions for i.MX27 TO2 */
+#define MXC_IIMSUID             0x0C04
+#define MXC_IIMKEY0             0x0C04
+#define MXC_IIMKEY20            0x0C54
+#define MXC_IIMSJC_RESP_0       0x0C58
+#define MXC_IIMSJC_RESP_7       0x0C74
+#define MXC_IIMFB1UC30          0x0C78
+#define MXC_IIMFB1UC255         0x0FFC
+
+/* Bit definitions */
+
+#define MXC_IIMHWV1_WLOCK               (0x1 << 7)
+#define MXC_IIMHWV1_MCU_ENDIAN          (0x1 << 6)
+#define MXC_IIMHWV1_DSP_ENDIAN          (0x1 << 5)
+#define MXC_IIMHWV1_BOOT_INT            (0x1 << 4)
+#define MXC_IIMHWV1_SCC_DISABLE         (0x1 << 3)
+#define MXC_IIMHWV1_HANTRO_DISABLE      (0x1 << 2)
+#define MXC_IIMHWV1_MEMSTICK_DIS        (0x1 << 1)
+
+#define MXC_IIMHWV2_WLOCK               (0x1 << 7)
+#define MXC_IIMHWV2_BP_SDMA             (0x1 << 6)
+#define MXC_IIMHWV2_SCM_DCM             (0x1 << 5)
+
+#endif /* __ASM_ARCH_MXC_IIM_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
new file mode 100644
index 000000000000..83fb72c4048a
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/imx-uart.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef ASMARM_ARCH_UART_H
+#define ASMARM_ARCH_UART_H
+
+#define IMXUART_HAVE_RTSCTS (1<<0)
+
+struct imxuart_platform_data {
+	int (*init)(struct platform_device *pdev);
+	int (*exit)(struct platform_device *pdev);
+	unsigned int flags;
+};
+
+int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata);
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/io.h b/arch/arm/plat-mxc/include/mach/io.h
new file mode 100644
index 000000000000..65b6810124c1
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_IO_H__
+#define __ASM_ARCH_MXC_IO_H__
+
+/* Allow IO space to be anywhere in the memory */
+#define IO_SPACE_LIMIT 0xffffffff
+
+/* io address mapping macro */
+#define __io(a)			((void __iomem *)(a))
+
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
new file mode 100644
index 000000000000..076d37b38eb2
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h
@@ -0,0 +1,372 @@
+/*
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef _MXC_GPIO_MX1_MX2_H
+#define _MXC_GPIO_MX1_MX2_H
+
+#include <linux/io.h>
+
+#define MXC_GPIO_ALLOC_MODE_NORMAL	0
+#define MXC_GPIO_ALLOC_MODE_NO_ALLOC	1
+#define MXC_GPIO_ALLOC_MODE_TRY_ALLOC	2
+#define MXC_GPIO_ALLOC_MODE_ALLOC_ONLY	4
+#define MXC_GPIO_ALLOC_MODE_RELEASE	8
+
+/*
+ *  GPIO Module and I/O Multiplexer
+ *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
+ */
+#define VA_GPIO_BASE	IO_ADDRESS(GPIO_BASE_ADDR)
+#define MXC_DDIR(x)    (0x00 + ((x) << 8))
+#define MXC_OCR1(x)    (0x04 + ((x) << 8))
+#define MXC_OCR2(x)    (0x08 + ((x) << 8))
+#define MXC_ICONFA1(x) (0x0c + ((x) << 8))
+#define MXC_ICONFA2(x) (0x10 + ((x) << 8))
+#define MXC_ICONFB1(x) (0x14 + ((x) << 8))
+#define MXC_ICONFB2(x) (0x18 + ((x) << 8))
+#define MXC_DR(x)      (0x1c + ((x) << 8))
+#define MXC_GIUS(x)    (0x20 + ((x) << 8))
+#define MXC_SSR(x)     (0x24 + ((x) << 8))
+#define MXC_ICR1(x)    (0x28 + ((x) << 8))
+#define MXC_ICR2(x)    (0x2c + ((x) << 8))
+#define MXC_IMR(x)     (0x30 + ((x) << 8))
+#define MXC_ISR(x)     (0x34 + ((x) << 8))
+#define MXC_GPR(x)     (0x38 + ((x) << 8))
+#define MXC_SWR(x)     (0x3c + ((x) << 8))
+#define MXC_PUEN(x)    (0x40 + ((x) << 8))
+
+#ifdef CONFIG_ARCH_MX1
+# define GPIO_PORT_MAX  3
+#endif
+#ifdef CONFIG_ARCH_MX2
+# define GPIO_PORT_MAX  5
+#endif
+
+#ifndef GPIO_PORT_MAX
+# error "GPIO config port count unknown!"
+#endif
+
+#define GPIO_PIN_MASK 0x1f
+
+#define GPIO_PORT_SHIFT 5
+#define GPIO_PORT_MASK (0x7 << GPIO_PORT_SHIFT)
+
+#define GPIO_PORTA (0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB (1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC (2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD (3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE (4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF (5 << GPIO_PORT_SHIFT)
+
+#define GPIO_OUT   (1 << 8)
+#define GPIO_IN    (0 << 8)
+#define GPIO_PUEN  (1 << 9)
+
+#define GPIO_PF    (1 << 10)
+#define GPIO_AF    (1 << 11)
+
+#define GPIO_OCR_SHIFT 12
+#define GPIO_OCR_MASK (3 << GPIO_OCR_SHIFT)
+#define GPIO_AIN   (0 << GPIO_OCR_SHIFT)
+#define GPIO_BIN   (1 << GPIO_OCR_SHIFT)
+#define GPIO_CIN   (2 << GPIO_OCR_SHIFT)
+#define GPIO_GPIO  (3 << GPIO_OCR_SHIFT)
+
+#define GPIO_AOUT_SHIFT 14
+#define GPIO_AOUT_MASK (3 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT     (0 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_ISR (1 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_0   (2 << GPIO_AOUT_SHIFT)
+#define GPIO_AOUT_1   (3 << GPIO_AOUT_SHIFT)
+
+#define GPIO_BOUT_SHIFT 16
+#define GPIO_BOUT_MASK (3 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT      (0 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_ISR  (1 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_0    (2 << GPIO_BOUT_SHIFT)
+#define GPIO_BOUT_1    (3 << GPIO_BOUT_SHIFT)
+
+extern void mxc_gpio_mode(int gpio_mode);
+extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
+					int alloc_mode, const char *label);
+
+/*-------------------------------------------------------------------------*/
+
+/* assignements for GPIO alternate/primary functions */
+
+/* FIXME: This list is not completed. The correct directions are
+ * missing on some (many) pins
+ */
+#ifdef CONFIG_ARCH_MX1
+#define PA0_AIN_SPI2_CLK     (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0)
+#define PA0_AF_ETMTRACESYNC  (GPIO_PORTA | GPIO_AF | 0)
+#define PA1_AOUT_SPI2_RXD    (GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1)
+#define PA1_PF_TIN           (GPIO_PORTA | GPIO_PF | 1)
+#define PA2_PF_PWM0          (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2)
+#define PA3_PF_CSI_MCLK      (GPIO_PORTA | GPIO_PF | 3)
+#define PA4_PF_CSI_D0        (GPIO_PORTA | GPIO_PF | 4)
+#define PA5_PF_CSI_D1        (GPIO_PORTA | GPIO_PF | 5)
+#define PA6_PF_CSI_D2        (GPIO_PORTA | GPIO_PF | 6)
+#define PA7_PF_CSI_D3        (GPIO_PORTA | GPIO_PF | 7)
+#define PA8_PF_CSI_D4        (GPIO_PORTA | GPIO_PF | 8)
+#define PA9_PF_CSI_D5        (GPIO_PORTA | GPIO_PF | 9)
+#define PA10_PF_CSI_D6       (GPIO_PORTA | GPIO_PF | 10)
+#define PA11_PF_CSI_D7       (GPIO_PORTA | GPIO_PF | 11)
+#define PA12_PF_CSI_VSYNC    (GPIO_PORTA | GPIO_PF | 12)
+#define PA13_PF_CSI_HSYNC    (GPIO_PORTA | GPIO_PF | 13)
+#define PA14_PF_CSI_PIXCLK   (GPIO_PORTA | GPIO_PF | 14)
+#define PA15_PF_I2C_SDA      (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
+#define PA16_PF_I2C_SCL      (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
+#define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17)
+#define PA17_AIN_SPI2_SS     (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17)
+#define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18)
+#define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19)
+#define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20)
+#define PA21_PF_A0           (GPIO_PORTA | GPIO_PF | 21)
+#define PA22_PF_CS4          (GPIO_PORTA | GPIO_PF | 22)
+#define PA23_PF_CS5          (GPIO_PORTA | GPIO_PF | 23)
+#define PA24_PF_A16          (GPIO_PORTA | GPIO_PF | 24)
+#define PA24_AF_ETMTRACEPKT0 (GPIO_PORTA | GPIO_AF | 24)
+#define PA25_PF_A17          (GPIO_PORTA | GPIO_PF | 25)
+#define PA25_AF_ETMTRACEPKT1 (GPIO_PORTA | GPIO_AF | 25)
+#define PA26_PF_A18          (GPIO_PORTA | GPIO_PF | 26)
+#define PA26_AF_ETMTRACEPKT2 (GPIO_PORTA | GPIO_AF | 26)
+#define PA27_PF_A19          (GPIO_PORTA | GPIO_PF | 27)
+#define PA27_AF_ETMTRACEPKT3 (GPIO_PORTA | GPIO_AF | 27)
+#define PA28_PF_A20          (GPIO_PORTA | GPIO_PF | 28)
+#define PA28_AF_ETMPIPESTAT0 (GPIO_PORTA | GPIO_AF | 28)
+#define PA29_PF_A21          (GPIO_PORTA | GPIO_PF | 29)
+#define PA29_AF_ETMPIPESTAT1 (GPIO_PORTA | GPIO_AF | 29)
+#define PA30_PF_A22          (GPIO_PORTA | GPIO_PF | 30)
+#define PA30_AF_ETMPIPESTAT2 (GPIO_PORTA | GPIO_AF | 30)
+#define PA31_PF_A23          (GPIO_PORTA | GPIO_PF | 31)
+#define PA31_AF_ETMTRACECLK  (GPIO_PORTA | GPIO_AF | 31)
+#define PB8_PF_SD_DAT0       (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8)
+#define PB8_AF_MS_PIO        (GPIO_PORTB | GPIO_AF | 8)
+#define PB9_PF_SD_DAT1       (GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 9)
+#define PB9_AF_MS_PI1        (GPIO_PORTB | GPIO_AF | 9)
+#define PB10_PF_SD_DAT2      (GPIO_PORTB | GPIO_PF | GPIO_PUEN  | 10)
+#define PB10_AF_MS_SCLKI     (GPIO_PORTB | GPIO_AF | 10)
+#define PB11_PF_SD_DAT3      (GPIO_PORTB | GPIO_PF | 11)
+#define PB11_AF_MS_SDIO      (GPIO_PORTB | GPIO_AF | 11)
+#define PB12_PF_SD_CLK       (GPIO_PORTB | GPIO_PF | 12)
+#define PB12_AF_MS_SCLK0     (GPIO_PORTB | GPIO_AF | 12)
+#define PB13_PF_SD_CMD       (GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13)
+#define PB13_AF_MS_BS        (GPIO_PORTB | GPIO_AF | 13)
+#define PB14_AF_SSI_RXFS     (GPIO_PORTB | GPIO_AF | 14)
+#define PB15_AF_SSI_RXCLK    (GPIO_PORTB | GPIO_AF | 15)
+#define PB16_AF_SSI_RXDAT    (GPIO_PORTB | GPIO_IN | GPIO_AF | 16)
+#define PB17_AF_SSI_TXDAT    (GPIO_PORTB | GPIO_OUT | GPIO_AF | 17)
+#define PB18_AF_SSI_TXFS     (GPIO_PORTB | GPIO_AF | 18)
+#define PB19_AF_SSI_TXCLK    (GPIO_PORTB | GPIO_AF | 19)
+#define PB20_PF_USBD_AFE     (GPIO_PORTB | GPIO_PF | 20)
+#define PB21_PF_USBD_OE      (GPIO_PORTB | GPIO_PF | 21)
+#define PB22_PFUSBD_RCV      (GPIO_PORTB | GPIO_PF | 22)
+#define PB23_PF_USBD_SUSPND  (GPIO_PORTB | GPIO_PF | 23)
+#define PB24_PF_USBD_VP      (GPIO_PORTB | GPIO_PF | 24)
+#define PB25_PF_USBD_VM      (GPIO_PORTB | GPIO_PF | 25)
+#define PB26_PF_USBD_VPO     (GPIO_PORTB | GPIO_PF | 26)
+#define PB27_PF_USBD_VMO     (GPIO_PORTB | GPIO_PF | 27)
+#define PB28_PF_UART2_CTS    (GPIO_PORTB | GPIO_OUT | GPIO_PF | 28)
+#define PB29_PF_UART2_RTS    (GPIO_PORTB | GPIO_IN | GPIO_PF | 29)
+#define PB30_PF_UART2_TXD    (GPIO_PORTB | GPIO_OUT | GPIO_PF | 30)
+#define PB31_PF_UART2_RXD    (GPIO_PORTB | GPIO_IN | GPIO_PF | 31)
+#define PC3_PF_SSI_RXFS      (GPIO_PORTC | GPIO_PF | 3)
+#define PC4_PF_SSI_RXCLK     (GPIO_PORTC | GPIO_PF | 4)
+#define PC5_PF_SSI_RXDAT     (GPIO_PORTC | GPIO_IN | GPIO_PF | 5)
+#define PC6_PF_SSI_TXDAT     (GPIO_PORTC | GPIO_OUT | GPIO_PF | 6)
+#define PC7_PF_SSI_TXFS      (GPIO_PORTC | GPIO_PF | 7)
+#define PC8_PF_SSI_TXCLK     (GPIO_PORTC | GPIO_PF | 8)
+#define PC9_PF_UART1_CTS     (GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
+#define PC10_PF_UART1_RTS    (GPIO_PORTC | GPIO_IN | GPIO_PF | 10)
+#define PC11_PF_UART1_TXD    (GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
+#define PC12_PF_UART1_RXD    (GPIO_PORTC | GPIO_IN | GPIO_PF | 12)
+#define PC13_PF_SPI1_SPI_RDY (GPIO_PORTC | GPIO_PF | 13)
+#define PC14_PF_SPI1_SCLK    (GPIO_PORTC | GPIO_PF | 14)
+#define PC15_PF_SPI1_SS      (GPIO_PORTC | GPIO_PF | 15)
+#define PC16_PF_SPI1_MISO    (GPIO_PORTC | GPIO_PF | 16)
+#define PC17_PF_SPI1_MOSI    (GPIO_PORTC | GPIO_PF | 17)
+#define PC24_BIN_UART3_RI    (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24)
+#define PC25_BIN_UART3_DSR   (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25)
+#define PC26_AOUT_UART3_DTR  (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26)
+#define PC27_BIN_UART3_DCD   (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27)
+#define PC28_BIN_UART3_CTS   (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28)
+#define PC29_AOUT_UART3_RTS  (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29)
+#define PC30_BIN_UART3_TX    (GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30)
+#define PC31_AOUT_UART3_RX   (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
+#define PD6_PF_LSCLK         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6)
+#define PD7_PF_REV           (GPIO_PORTD | GPIO_PF | 7)
+#define PD7_AF_UART2_DTR     (GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7)
+#define PD7_AIN_SPI2_SCLK    (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7)
+#define PD8_PF_CLS           (GPIO_PORTD | GPIO_PF | 8)
+#define PD8_AF_UART2_DCD     (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8)
+#define PD8_AIN_SPI2_SS      (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8)
+#define PD9_PF_PS            (GPIO_PORTD | GPIO_PF | 9)
+#define PD9_AF_UART2_RI      (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9)
+#define PD9_AOUT_SPI2_RXD    (GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9)
+#define PD10_PF_SPL_SPR      (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10)
+#define PD10_AF_UART2_DSR    (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10)
+#define PD10_AIN_SPI2_TXD    (GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10)
+#define PD11_PF_CONTRAST     (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11)
+#define PD12_PF_ACD_OE       (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12)
+#define PD13_PF_LP_HSYNC     (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13)
+#define PD14_PF_FLM_VSYNC    (GPIO_PORTD | GPIO_OUT | GPIO_PF | 14)
+#define PD15_PF_LD0          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 15)
+#define PD16_PF_LD1          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 16)
+#define PD17_PF_LD2          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
+#define PD18_PF_LD3          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
+#define PD19_PF_LD4          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 19)
+#define PD20_PF_LD5          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 20)
+#define PD21_PF_LD6          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 21)
+#define PD22_PF_LD7          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 22)
+#define PD23_PF_LD8          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 23)
+#define PD24_PF_LD9          (GPIO_PORTD | GPIO_OUT | GPIO_PF | 24)
+#define PD25_PF_LD10         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 25)
+#define PD26_PF_LD11         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 26)
+#define PD27_PF_LD12         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 27)
+#define PD28_PF_LD13         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 28)
+#define PD29_PF_LD14         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
+#define PD30_PF_LD15         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30)
+#define PD31_PF_TMR2OUT      (GPIO_PORTD | GPIO_PF | 31)
+#define PD31_BIN_SPI2_TXD    (GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31)
+#endif
+
+#ifdef CONFIG_ARCH_MX2
+#define PA5_PF_LSCLK		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 5)
+#define PA6_PF_LD0		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 6)
+#define PA7_PF_LD1		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 7)
+#define PA8_PF_LD2		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 8)
+#define PA9_PF_LD3		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 9)
+#define PA10_PF_LD4		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 10)
+#define PA11_PF_LD5		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 11)
+#define PA12_PF_LD6		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 12)
+#define PA13_PF_LD7		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 13)
+#define PA14_PF_LD8		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 14)
+#define PA15_PF_LD9		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
+#define PA16_PF_LD10		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
+#define PA17_PF_LD11		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 17)
+#define PA18_PF_LD12		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 18)
+#define PA19_PF_LD13		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 19)
+#define PA20_PF_LD14		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 20)
+#define PA21_PF_LD15		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 21)
+#define PA22_PF_LD16		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 22)
+#define PA23_PF_LD17		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 23)
+#define PA24_PF_REV		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 24)
+#define PA25_PF_CLS		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 25)
+#define PA26_PF_PS		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 26)
+#define PA27_PF_SPL_SPR		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 27)
+#define PA28_PF_HSYNC		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 28)
+#define PA29_PF_VSYNC		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 29)
+#define PA30_PF_CONTRAST	(GPIO_PORTA | GPIO_OUT | GPIO_PF | 30)
+#define PA31_PF_OE_ACD		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 31)
+#define PB10_PF_CSI_D0		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 10)
+#define PB10_AF_UART6_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 10)
+#define PB11_PF_CSI_D1		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 11)
+#define PB11_AF_UART6_RXD	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 11)
+#define PB12_PF_CSI_D2		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 12)
+#define PB12_AF_UART6_CTS	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 12)
+#define PB13_PF_CSI_D3		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 13)
+#define PB13_AF_UART6_RTS	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 13)
+#define PB14_PF_CSI_D4		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 14)
+#define PB15_PF_CSI_MCLK	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 15)
+#define PB16_PF_CSI_PIXCLK	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 16)
+#define PB17_PF_CSI_D5		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 17)
+#define PB18_PF_CSI_D6		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 18)
+#define PB18_AF_UART5_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 18)
+#define PB19_PF_CSI_D7		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 19)
+#define PB19_AF_UART5_RXD	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 19)
+#define PB20_PF_CSI_VSYNC	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 20)
+#define PB20_AF_UART5_CTS	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 20)
+#define PB21_PF_CSI_HSYNC	(GPIO_PORTB | GPIO_OUT | GPIO_PF | 21)
+#define PB21_AF_UART5_RTS	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 21)
+#define PB26_AF_UART4_RTS	(GPIO_PORTB | GPIO_IN  | GPIO_PF | 26)
+#define PB28_AF_UART4_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 28)
+#define PB29_AF_UART4_CTS	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 29)
+#define PB31_AF_UART4_RXD	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 31)
+#define PC5_PF_I2C2_SDA		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 5)
+#define PC6_PF_I2C2_SCL		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 6)
+#define PC16_PF_SSI4_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 16)
+#define PC17_PF_SSI4_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 17)
+#define PC18_PF_SSI4_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 18)
+#define PC19_PF_SSI4_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 19)
+#define PC20_PF_SSI1_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 20)
+#define PC21_PF_SSI1_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 21)
+#define PC22_PF_SSI1_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 22)
+#define PC23_PF_SSI1_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 23)
+#define PC24_PF_SSI2_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 24)
+#define PC25_PF_SSI2_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 25)
+#define PC26_PF_SSI2_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 26)
+#define PC27_PF_SSI2_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 27)
+#define PC28_PF_SSI3_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 28)
+#define PC29_PF_SSI3_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 29)
+#define PC30_PF_SSI3_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 30)
+#define PC31_PF_SSI3_CLK	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 31)
+#define PD0_AIN_FEC_TXD0	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 0)
+#define PD1_AIN_FEC_TXD1	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 1)
+#define PD2_AIN_FEC_TXD2	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 2)
+#define PD3_AIN_FEC_TXD3	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 3)
+#define PD4_AOUT_FEC_RX_ER	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 4)
+#define PD5_AOUT_FEC_RXD1	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 5)
+#define PD6_AOUT_FEC_RXD2	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 6)
+#define PD7_AOUT_FEC_RXD3	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 7)
+#define PD8_AF_FEC_MDIO		(GPIO_PORTD | GPIO_IN | GPIO_AF | 8)
+#define PD9_AIN_FEC_MDC		(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 9)
+#define PD10_AOUT_FEC_CRS	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 10)
+#define PD11_AOUT_FEC_TX_CLK	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 11)
+#define PD12_AOUT_FEC_RXD0	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 12)
+#define PD13_AOUT_FEC_RX_DV	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 13)
+#define PD14_AOUT_FEC_CLR	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 14)
+#define PD15_AOUT_FEC_COL	(GPIO_PORTD | GPIO_IN | GPIO_AOUT | 15)
+#define PD16_AIN_FEC_TX_ER	(GPIO_PORTD | GPIO_OUT | GPIO_AIN | 16)
+#define PD17_PF_I2C_DATA	(GPIO_PORTD | GPIO_OUT | GPIO_PF | 17)
+#define PD18_PF_I2C_CLK		(GPIO_PORTD | GPIO_OUT | GPIO_PF | 18)
+#define PD25_PF_CSPI1_RDY	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 25)
+#define PD26_PF_CSPI1_SS2	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 26)
+#define PD27_PF_CSPI1_SS1	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 27)
+#define PD28_PF_CSPI1_SS0	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 28)
+#define PD29_PF_CSPI1_SCLK	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 29)
+#define PD30_PF_CSPI1_MISO	(GPIO_PORTD | GPIO_IN | GPIO_PF  | 30)
+#define PD31_PF_CSPI1_MOSI	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 31)
+#define PF23_AIN_FEC_TX_EN	(GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23)
+#define PE3_PF_UART2_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 3)
+#define PE4_PF_UART2_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 4)
+#define PE6_PF_UART2_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 6)
+#define PE7_PF_UART2_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 7)
+#define PE8_PF_UART3_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 8)
+#define PE9_PF_UART3_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 9)
+#define PE10_PF_UART3_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 10)
+#define PE11_PF_UART3_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 11)
+#define PE12_PF_UART1_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 12)
+#define PE13_PF_UART1_RXD	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 13)
+#define PE14_PF_UART1_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 14)
+#define PE15_PF_UART1_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 15)
+#define PE18_AF_CSPI3_MISO	(GPIO_PORTE | GPIO_IN  | GPIO_AF | 18)
+#define PE21_AF_CSPI3_SS	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 21)
+#define PE22_AF_CSPI3_MOSI	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 22)
+#define PE23_AF_CSPI3_SCLK	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 23)
+#endif
+
+/* decode irq number to use with IMR(x), ISR(x) and friends */
+#define IRQ_TO_REG(irq) ((irq - MXC_MAX_INT_LINES) >> 5)
+
+#define IRQ_GPIOA(x)  (MXC_MAX_INT_LINES + x)
+#define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
+#define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
+#define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
+
+#endif /* _MXC_GPIO_MX1_MX2_H */
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
new file mode 100644
index 000000000000..7509e7692f08
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -0,0 +1,501 @@
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_MX31_IOMUX_H__
+#define __MACH_MX31_IOMUX_H__
+
+#include <linux/types.h>
+
+/*
+ * various IOMUX output functions
+ */
+
+#define	IOMUX_OCONFIG_GPIO (0 << 4)	/* used as GPIO */
+#define	IOMUX_OCONFIG_FUNC (1 << 4)	/* used as function */
+#define	IOMUX_OCONFIG_ALT1 (2 << 4)	/* used as alternate function 1 */
+#define	IOMUX_OCONFIG_ALT2 (3 << 4)	/* used as alternate function 2 */
+#define	IOMUX_OCONFIG_ALT3 (4 << 4)	/* used as alternate function 3 */
+#define	IOMUX_OCONFIG_ALT4 (5 << 4)	/* used as alternate function 4 */
+#define	IOMUX_OCONFIG_ALT5 (6 << 4)	/* used as alternate function 5 */
+#define	IOMUX_OCONFIG_ALT6 (7 << 4)	/* used as alternate function 6 */
+#define	IOMUX_ICONFIG_NONE  0	 	/* not configured for input */
+#define	IOMUX_ICONFIG_GPIO  1		/* used as GPIO */
+#define	IOMUX_ICONFIG_FUNC  2		/* used as function */
+#define	IOMUX_ICONFIG_ALT1  4		/* used as alternate function 1 */
+#define	IOMUX_ICONFIG_ALT2  8		/* used as alternate function 2 */
+
+#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO)
+#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC)
+#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1)
+#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2)
+
+/*
+ * various IOMUX pad functions
+ */
+enum iomux_pad_config {
+	PAD_CTL_NOLOOPBACK	= 0x0 << 9,
+	PAD_CTL_LOOPBACK	= 0x1 << 9,
+	PAD_CTL_PKE_NONE	= 0x0 << 8,
+	PAD_CTL_PKE_ENABLE	= 0x1 << 8,
+	PAD_CTL_PUE_KEEPER	= 0x0 << 7,
+	PAD_CTL_PUE_PUD		= 0x1 << 7,
+	PAD_CTL_100K_PD		= 0x0 << 5,
+	PAD_CTL_100K_PU		= 0x1 << 5,
+	PAD_CTL_47K_PU		= 0x2 << 5,
+	PAD_CTL_22K_PU		= 0x3 << 5,
+	PAD_CTL_HYS_CMOS	= 0x0 << 4,
+	PAD_CTL_HYS_SCHMITZ	= 0x1 << 4,
+	PAD_CTL_ODE_CMOS	= 0x0 << 3,
+	PAD_CTL_ODE_OpenDrain	= 0x1 << 3,
+	PAD_CTL_DRV_NORMAL	= 0x0 << 1,
+	PAD_CTL_DRV_HIGH	= 0x1 << 1,
+	PAD_CTL_DRV_MAX		= 0x2 << 1,
+	PAD_CTL_SRE_SLOW	= 0x0 << 0,
+	PAD_CTL_SRE_FAST	= 0x1 << 0
+};
+
+/*
+ * various IOMUX general purpose functions
+ */
+enum iomux_gp_func {
+	MUX_PGP_FIRI			= 1 << 0,
+	MUX_DDR_MODE			= 1 << 1,
+	MUX_PGP_CSPI_BB			= 1 << 2,
+	MUX_PGP_ATA_1			= 1 << 3,
+	MUX_PGP_ATA_2			= 1 << 4,
+	MUX_PGP_ATA_3			= 1 << 5,
+	MUX_PGP_ATA_4			= 1 << 6,
+	MUX_PGP_ATA_5			= 1 << 7,
+	MUX_PGP_ATA_6			= 1 << 8,
+	MUX_PGP_ATA_7			= 1 << 9,
+	MUX_PGP_ATA_8			= 1 << 10,
+	MUX_PGP_UH2			= 1 << 11,
+	MUX_SDCTL_CSD0_SEL		= 1 << 12,
+	MUX_SDCTL_CSD1_SEL		= 1 << 13,
+	MUX_CSPI1_UART3			= 1 << 14,
+	MUX_EXTDMAREQ2_MBX_SEL		= 1 << 15,
+	MUX_TAMPER_DETECT_EN		= 1 << 16,
+	MUX_PGP_USB_4WIRE		= 1 << 17,
+	MUX_PGB_USB_COMMON		= 1 << 18,
+	MUX_SDHC_MEMSTICK1		= 1 << 19,
+	MUX_SDHC_MEMSTICK2		= 1 << 20,
+	MUX_PGP_SPLL_BYP		= 1 << 21,
+	MUX_PGP_UPLL_BYP		= 1 << 22,
+	MUX_PGP_MSHC1_CLK_SEL		= 1 << 23,
+	MUX_PGP_MSHC2_CLK_SEL		= 1 << 24,
+	MUX_CSPI3_UART5_SEL		= 1 << 25,
+	MUX_PGP_ATA_9			= 1 << 26,
+	MUX_PGP_USB_SUSPEND		= 1 << 27,
+	MUX_PGP_USB_OTG_LOOPBACK	= 1 << 28,
+	MUX_PGP_USB_HS1_LOOPBACK	= 1 << 29,
+	MUX_PGP_USB_HS2_LOOPBACK	= 1 << 30,
+	MUX_CLKO_DDR_MODE		= 1 << 31,
+};
+
+/*
+ * This function enables/disables the general purpose function for a particular
+ * signal.
+ */
+void iomux_config_gpr(enum iomux_gp_func , bool);
+
+/*
+ * set the mode for a IOMUX pin.
+ */
+int mxc_iomux_mode(unsigned int);
+
+/*
+ * This function enables/disables the general purpose function for a particular
+ * signal.
+ */
+void mxc_iomux_set_gpr(enum iomux_gp_func, bool);
+
+#define IOMUX_PADNUM_MASK	0x1ff
+#define IOMUX_GPIONUM_SHIFT	9
+#define IOMUX_GPIONUM_MASK	(0xff << IOMUX_GPIONUM_SHIFT)
+#define IOMUX_MODE_SHIFT	17
+#define IOMUX_MODE_MASK	(0xff << IOMUX_MODE_SHIFT)
+
+#define IOMUX_PIN(gpionum, padnum) \
+	(((gpionum << IOMUX_GPIONUM_SHIFT) & IOMUX_GPIONUM_MASK) | \
+	 (padnum & IOMUX_PADNUM_MASK))
+
+#define IOMUX_MODE(pin, mode) (pin | mode << IOMUX_MODE_SHIFT)
+
+#define IOMUX_TO_GPIO(iomux_pin) \
+	((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT)
+#define IOMUX_TO_IRQ(iomux_pin) \
+	(((iomux_pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT) + \
+	MXC_GPIO_INT_BASE)
+
+/*
+ * This enumeration is constructed based on the Section
+ * "sw_pad_ctl & sw_mux_ctl details" of the MX31 IC Spec. Each enumerated
+ * value is constructed based on the rules described above.
+ */
+
+enum iomux_pins {
+	MX31_PIN_TTM_PAD	= IOMUX_PIN(0xff,   0),
+	MX31_PIN_CSPI3_SPI_RDY	= IOMUX_PIN(0xff,   1),
+	MX31_PIN_CSPI3_SCLK	= IOMUX_PIN(0xff,   2),
+	MX31_PIN_CSPI3_MISO	= IOMUX_PIN(0xff,   3),
+	MX31_PIN_CSPI3_MOSI	= IOMUX_PIN(0xff,   4),
+	MX31_PIN_CLKSS		= IOMUX_PIN(0xff,   5),
+	MX31_PIN_CE_CONTROL	= IOMUX_PIN(0xff,   6),
+	MX31_PIN_ATA_RESET_B	= IOMUX_PIN(95,     7),
+	MX31_PIN_ATA_DMACK	= IOMUX_PIN(94,     8),
+	MX31_PIN_ATA_DIOW	= IOMUX_PIN(93,     9),
+	MX31_PIN_ATA_DIOR	= IOMUX_PIN(92,    10),
+	MX31_PIN_ATA_CS1	= IOMUX_PIN(91,    11),
+	MX31_PIN_ATA_CS0	= IOMUX_PIN(90,    12),
+	MX31_PIN_SD1_DATA3	= IOMUX_PIN(63,    13),
+	MX31_PIN_SD1_DATA2	= IOMUX_PIN(62,    14),
+	MX31_PIN_SD1_DATA1	= IOMUX_PIN(61,    15),
+	MX31_PIN_SD1_DATA0	= IOMUX_PIN(60,    16),
+	MX31_PIN_SD1_CLK	= IOMUX_PIN(59,    17),
+	MX31_PIN_SD1_CMD	= IOMUX_PIN(58,    18),
+	MX31_PIN_D3_SPL		= IOMUX_PIN(0xff,  19),
+	MX31_PIN_D3_CLS		= IOMUX_PIN(0xff,  20),
+	MX31_PIN_D3_REV		= IOMUX_PIN(0xff,  21),
+	MX31_PIN_CONTRAST	= IOMUX_PIN(0xff,  22),
+	MX31_PIN_VSYNC3		= IOMUX_PIN(0xff,  23),
+	MX31_PIN_READ		= IOMUX_PIN(0xff,  24),
+	MX31_PIN_WRITE		= IOMUX_PIN(0xff,  25),
+	MX31_PIN_PAR_RS		= IOMUX_PIN(0xff,  26),
+	MX31_PIN_SER_RS		= IOMUX_PIN(89,    27),
+	MX31_PIN_LCS1		= IOMUX_PIN(88,    28),
+	MX31_PIN_LCS0		= IOMUX_PIN(87,    29),
+	MX31_PIN_SD_D_CLK	= IOMUX_PIN(86,    30),
+	MX31_PIN_SD_D_IO	= IOMUX_PIN(85,    31),
+	MX31_PIN_SD_D_I		= IOMUX_PIN(84,    32),
+	MX31_PIN_DRDY0		= IOMUX_PIN(0xff,  33),
+	MX31_PIN_FPSHIFT	= IOMUX_PIN(0xff,  34),
+	MX31_PIN_HSYNC		= IOMUX_PIN(0xff,  35),
+	MX31_PIN_VSYNC0		= IOMUX_PIN(0xff,  36),
+	MX31_PIN_LD17		= IOMUX_PIN(0xff,  37),
+	MX31_PIN_LD16		= IOMUX_PIN(0xff,  38),
+	MX31_PIN_LD15		= IOMUX_PIN(0xff,  39),
+	MX31_PIN_LD14		= IOMUX_PIN(0xff,  40),
+	MX31_PIN_LD13		= IOMUX_PIN(0xff,  41),
+	MX31_PIN_LD12		= IOMUX_PIN(0xff,  42),
+	MX31_PIN_LD11		= IOMUX_PIN(0xff,  43),
+	MX31_PIN_LD10		= IOMUX_PIN(0xff,  44),
+	MX31_PIN_LD9		= IOMUX_PIN(0xff,  45),
+	MX31_PIN_LD8		= IOMUX_PIN(0xff,  46),
+	MX31_PIN_LD7		= IOMUX_PIN(0xff,  47),
+	MX31_PIN_LD6		= IOMUX_PIN(0xff,  48),
+	MX31_PIN_LD5		= IOMUX_PIN(0xff,  49),
+	MX31_PIN_LD4		= IOMUX_PIN(0xff,  50),
+	MX31_PIN_LD3		= IOMUX_PIN(0xff,  51),
+	MX31_PIN_LD2		= IOMUX_PIN(0xff,  52),
+	MX31_PIN_LD1		= IOMUX_PIN(0xff,  53),
+	MX31_PIN_LD0		= IOMUX_PIN(0xff,  54),
+	MX31_PIN_USBH2_DATA1	= IOMUX_PIN(0xff,  55),
+	MX31_PIN_USBH2_DATA0	= IOMUX_PIN(0xff,  56),
+	MX31_PIN_USBH2_NXT	= IOMUX_PIN(0xff,  57),
+	MX31_PIN_USBH2_STP	= IOMUX_PIN(0xff,  58),
+	MX31_PIN_USBH2_DIR	= IOMUX_PIN(0xff,  59),
+	MX31_PIN_USBH2_CLK	= IOMUX_PIN(0xff,  60),
+	MX31_PIN_USBOTG_DATA7	= IOMUX_PIN(0xff,  61),
+	MX31_PIN_USBOTG_DATA6	= IOMUX_PIN(0xff,  62),
+	MX31_PIN_USBOTG_DATA5	= IOMUX_PIN(0xff,  63),
+	MX31_PIN_USBOTG_DATA4	= IOMUX_PIN(0xff,  64),
+	MX31_PIN_USBOTG_DATA3	= IOMUX_PIN(0xff,  65),
+	MX31_PIN_USBOTG_DATA2	= IOMUX_PIN(0xff,  66),
+	MX31_PIN_USBOTG_DATA1	= IOMUX_PIN(0xff,  67),
+	MX31_PIN_USBOTG_DATA0	= IOMUX_PIN(0xff,  68),
+	MX31_PIN_USBOTG_NXT	= IOMUX_PIN(0xff,  69),
+	MX31_PIN_USBOTG_STP	= IOMUX_PIN(0xff,  70),
+	MX31_PIN_USBOTG_DIR	= IOMUX_PIN(0xff,  71),
+	MX31_PIN_USBOTG_CLK	= IOMUX_PIN(0xff,  72),
+	MX31_PIN_USB_BYP	= IOMUX_PIN(31,    73),
+	MX31_PIN_USB_OC		= IOMUX_PIN(30,    74),
+	MX31_PIN_USB_PWR	= IOMUX_PIN(29,    75),
+	MX31_PIN_SJC_MOD	= IOMUX_PIN(0xff,  76),
+	MX31_PIN_DE_B		= IOMUX_PIN(0xff,  77),
+	MX31_PIN_TRSTB		= IOMUX_PIN(0xff,  78),
+	MX31_PIN_TDO		= IOMUX_PIN(0xff,  79),
+	MX31_PIN_TDI		= IOMUX_PIN(0xff,  80),
+	MX31_PIN_TMS		= IOMUX_PIN(0xff,  81),
+	MX31_PIN_TCK		= IOMUX_PIN(0xff,  82),
+	MX31_PIN_RTCK		= IOMUX_PIN(0xff,  83),
+	MX31_PIN_KEY_COL7	= IOMUX_PIN(57,    84),
+	MX31_PIN_KEY_COL6	= IOMUX_PIN(56,    85),
+	MX31_PIN_KEY_COL5	= IOMUX_PIN(55,    86),
+	MX31_PIN_KEY_COL4	= IOMUX_PIN(54,    87),
+	MX31_PIN_KEY_COL3	= IOMUX_PIN(0xff,  88),
+	MX31_PIN_KEY_COL2	= IOMUX_PIN(0xff,  89),
+	MX31_PIN_KEY_COL1	= IOMUX_PIN(0xff,  90),
+	MX31_PIN_KEY_COL0	= IOMUX_PIN(0xff,  91),
+	MX31_PIN_KEY_ROW7	= IOMUX_PIN(53,    92),
+	MX31_PIN_KEY_ROW6	= IOMUX_PIN(52,    93),
+	MX31_PIN_KEY_ROW5	= IOMUX_PIN(51,    94),
+	MX31_PIN_KEY_ROW4	= IOMUX_PIN(50,    95),
+	MX31_PIN_KEY_ROW3	= IOMUX_PIN(0xff,  96),
+	MX31_PIN_KEY_ROW2	= IOMUX_PIN(0xff,  97),
+	MX31_PIN_KEY_ROW1	= IOMUX_PIN(0xff,  98),
+	MX31_PIN_KEY_ROW0	= IOMUX_PIN(0xff,  99),
+	MX31_PIN_BATT_LINE	= IOMUX_PIN(49,   100),
+	MX31_PIN_CTS2		= IOMUX_PIN(0xff, 101),
+	MX31_PIN_RTS2		= IOMUX_PIN(0xff, 102),
+	MX31_PIN_TXD2		= IOMUX_PIN(28,   103),
+	MX31_PIN_RXD2		= IOMUX_PIN(27,   104),
+	MX31_PIN_DTR_DCE2	= IOMUX_PIN(48,   105),
+	MX31_PIN_DCD_DTE1	= IOMUX_PIN(47,   106),
+	MX31_PIN_RI_DTE1	= IOMUX_PIN(46,   107),
+	MX31_PIN_DSR_DTE1	= IOMUX_PIN(45,   108),
+	MX31_PIN_DTR_DTE1	= IOMUX_PIN(44,   109),
+	MX31_PIN_DCD_DCE1	= IOMUX_PIN(43,   110),
+	MX31_PIN_RI_DCE1	= IOMUX_PIN(42,   111),
+	MX31_PIN_DSR_DCE1	= IOMUX_PIN(41,   112),
+	MX31_PIN_DTR_DCE1	= IOMUX_PIN(40,   113),
+	MX31_PIN_CTS1		= IOMUX_PIN(39,   114),
+	MX31_PIN_RTS1		= IOMUX_PIN(38,   115),
+	MX31_PIN_TXD1		= IOMUX_PIN(37,   116),
+	MX31_PIN_RXD1		= IOMUX_PIN(36,   117),
+	MX31_PIN_CSPI2_SPI_RDY	= IOMUX_PIN(0xff, 118),
+	MX31_PIN_CSPI2_SCLK	= IOMUX_PIN(0xff, 119),
+	MX31_PIN_CSPI2_SS2	= IOMUX_PIN(0xff, 120),
+	MX31_PIN_CSPI2_SS1	= IOMUX_PIN(0xff, 121),
+	MX31_PIN_CSPI2_SS0	= IOMUX_PIN(0xff, 122),
+	MX31_PIN_CSPI2_MISO	= IOMUX_PIN(0xff, 123),
+	MX31_PIN_CSPI2_MOSI	= IOMUX_PIN(0xff, 124),
+	MX31_PIN_CSPI1_SPI_RDY	= IOMUX_PIN(0xff, 125),
+	MX31_PIN_CSPI1_SCLK	= IOMUX_PIN(0xff, 126),
+	MX31_PIN_CSPI1_SS2	= IOMUX_PIN(0xff, 127),
+	MX31_PIN_CSPI1_SS1	= IOMUX_PIN(0xff, 128),
+	MX31_PIN_CSPI1_SS0	= IOMUX_PIN(0xff, 129),
+	MX31_PIN_CSPI1_MISO	= IOMUX_PIN(0xff, 130),
+	MX31_PIN_CSPI1_MOSI	= IOMUX_PIN(0xff, 131),
+	MX31_PIN_SFS6		= IOMUX_PIN(26,   132),
+	MX31_PIN_SCK6		= IOMUX_PIN(25,   133),
+	MX31_PIN_SRXD6		= IOMUX_PIN(24,   134),
+	MX31_PIN_STXD6		= IOMUX_PIN(23,   135),
+	MX31_PIN_SFS5		= IOMUX_PIN(0xff, 136),
+	MX31_PIN_SCK5		= IOMUX_PIN(0xff, 137),
+	MX31_PIN_SRXD5		= IOMUX_PIN(22,   138),
+	MX31_PIN_STXD5		= IOMUX_PIN(21,   139),
+	MX31_PIN_SFS4		= IOMUX_PIN(0xff, 140),
+	MX31_PIN_SCK4		= IOMUX_PIN(0xff, 141),
+	MX31_PIN_SRXD4		= IOMUX_PIN(20,   142),
+	MX31_PIN_STXD4		= IOMUX_PIN(19,   143),
+	MX31_PIN_SFS3		= IOMUX_PIN(0xff, 144),
+	MX31_PIN_SCK3		= IOMUX_PIN(0xff, 145),
+	MX31_PIN_SRXD3		= IOMUX_PIN(18,   146),
+	MX31_PIN_STXD3		= IOMUX_PIN(17,   147),
+	MX31_PIN_I2C_DAT	= IOMUX_PIN(0xff, 148),
+	MX31_PIN_I2C_CLK	= IOMUX_PIN(0xff, 149),
+	MX31_PIN_CSI_PIXCLK	= IOMUX_PIN(83,   150),
+	MX31_PIN_CSI_HSYNC	= IOMUX_PIN(82,   151),
+	MX31_PIN_CSI_VSYNC	= IOMUX_PIN(81,   152),
+	MX31_PIN_CSI_MCLK	= IOMUX_PIN(80,   153),
+	MX31_PIN_CSI_D15	= IOMUX_PIN(79,   154),
+	MX31_PIN_CSI_D14	= IOMUX_PIN(78,   155),
+	MX31_PIN_CSI_D13	= IOMUX_PIN(77,   156),
+	MX31_PIN_CSI_D12	= IOMUX_PIN(76,   157),
+	MX31_PIN_CSI_D11	= IOMUX_PIN(75,   158),
+	MX31_PIN_CSI_D10	= IOMUX_PIN(74,   159),
+	MX31_PIN_CSI_D9		= IOMUX_PIN(73,   160),
+	MX31_PIN_CSI_D8		= IOMUX_PIN(72,   161),
+	MX31_PIN_CSI_D7		= IOMUX_PIN(71,   162),
+	MX31_PIN_CSI_D6		= IOMUX_PIN(70,   163),
+	MX31_PIN_CSI_D5		= IOMUX_PIN(69,   164),
+	MX31_PIN_CSI_D4		= IOMUX_PIN(68,   165),
+	MX31_PIN_M_GRANT	= IOMUX_PIN(0xff, 166),
+	MX31_PIN_M_REQUEST	= IOMUX_PIN(0xff, 167),
+	MX31_PIN_PC_POE		= IOMUX_PIN(0xff, 168),
+	MX31_PIN_PC_RW_B	= IOMUX_PIN(0xff, 169),
+	MX31_PIN_IOIS16		= IOMUX_PIN(0xff, 170),
+	MX31_PIN_PC_RST		= IOMUX_PIN(0xff, 171),
+	MX31_PIN_PC_BVD2	= IOMUX_PIN(0xff, 172),
+	MX31_PIN_PC_BVD1	= IOMUX_PIN(0xff, 173),
+	MX31_PIN_PC_VS2		= IOMUX_PIN(0xff, 174),
+	MX31_PIN_PC_VS1		= IOMUX_PIN(0xff, 175),
+	MX31_PIN_PC_PWRON	= IOMUX_PIN(0xff, 176),
+	MX31_PIN_PC_READY	= IOMUX_PIN(0xff, 177),
+	MX31_PIN_PC_WAIT_B	= IOMUX_PIN(0xff, 178),
+	MX31_PIN_PC_CD2_B	= IOMUX_PIN(0xff, 179),
+	MX31_PIN_PC_CD1_B	= IOMUX_PIN(0xff, 180),
+	MX31_PIN_D0		= IOMUX_PIN(0xff, 181),
+	MX31_PIN_D1		= IOMUX_PIN(0xff, 182),
+	MX31_PIN_D2		= IOMUX_PIN(0xff, 183),
+	MX31_PIN_D3		= IOMUX_PIN(0xff, 184),
+	MX31_PIN_D4		= IOMUX_PIN(0xff, 185),
+	MX31_PIN_D5		= IOMUX_PIN(0xff, 186),
+	MX31_PIN_D6		= IOMUX_PIN(0xff, 187),
+	MX31_PIN_D7		= IOMUX_PIN(0xff, 188),
+	MX31_PIN_D8		= IOMUX_PIN(0xff, 189),
+	MX31_PIN_D9		= IOMUX_PIN(0xff, 190),
+	MX31_PIN_D10		= IOMUX_PIN(0xff, 191),
+	MX31_PIN_D11		= IOMUX_PIN(0xff, 192),
+	MX31_PIN_D12		= IOMUX_PIN(0xff, 193),
+	MX31_PIN_D13		= IOMUX_PIN(0xff, 194),
+	MX31_PIN_D14		= IOMUX_PIN(0xff, 195),
+	MX31_PIN_D15		= IOMUX_PIN(0xff, 196),
+	MX31_PIN_NFRB		= IOMUX_PIN(16,   197),
+	MX31_PIN_NFCE_B		= IOMUX_PIN(15,   198),
+	MX31_PIN_NFWP_B		= IOMUX_PIN(14,   199),
+	MX31_PIN_NFCLE		= IOMUX_PIN(13,   200),
+	MX31_PIN_NFALE		= IOMUX_PIN(12,   201),
+	MX31_PIN_NFRE_B		= IOMUX_PIN(11,   202),
+	MX31_PIN_NFWE_B		= IOMUX_PIN(10,   203),
+	MX31_PIN_SDQS3		= IOMUX_PIN(0xff, 204),
+	MX31_PIN_SDQS2		= IOMUX_PIN(0xff, 205),
+	MX31_PIN_SDQS1		= IOMUX_PIN(0xff, 206),
+	MX31_PIN_SDQS0		= IOMUX_PIN(0xff, 207),
+	MX31_PIN_SDCLK_B	= IOMUX_PIN(0xff, 208),
+	MX31_PIN_SDCLK		= IOMUX_PIN(0xff, 209),
+	MX31_PIN_SDCKE1		= IOMUX_PIN(0xff, 210),
+	MX31_PIN_SDCKE0		= IOMUX_PIN(0xff, 211),
+	MX31_PIN_SDWE		= IOMUX_PIN(0xff, 212),
+	MX31_PIN_CAS		= IOMUX_PIN(0xff, 213),
+	MX31_PIN_RAS		= IOMUX_PIN(0xff, 214),
+	MX31_PIN_RW		= IOMUX_PIN(0xff, 215),
+	MX31_PIN_BCLK		= IOMUX_PIN(0xff, 216),
+	MX31_PIN_LBA		= IOMUX_PIN(0xff, 217),
+	MX31_PIN_ECB		= IOMUX_PIN(0xff, 218),
+	MX31_PIN_CS5		= IOMUX_PIN(0xff, 219),
+	MX31_PIN_CS4		= IOMUX_PIN(0xff, 220),
+	MX31_PIN_CS3		= IOMUX_PIN(0xff, 221),
+	MX31_PIN_CS2		= IOMUX_PIN(0xff, 222),
+	MX31_PIN_CS1		= IOMUX_PIN(0xff, 223),
+	MX31_PIN_CS0		= IOMUX_PIN(0xff, 224),
+	MX31_PIN_OE		= IOMUX_PIN(0xff, 225),
+	MX31_PIN_EB1		= IOMUX_PIN(0xff, 226),
+	MX31_PIN_EB0		= IOMUX_PIN(0xff, 227),
+	MX31_PIN_DQM3		= IOMUX_PIN(0xff, 228),
+	MX31_PIN_DQM2		= IOMUX_PIN(0xff, 229),
+	MX31_PIN_DQM1		= IOMUX_PIN(0xff, 230),
+	MX31_PIN_DQM0		= IOMUX_PIN(0xff, 231),
+	MX31_PIN_SD31		= IOMUX_PIN(0xff, 232),
+	MX31_PIN_SD30		= IOMUX_PIN(0xff, 233),
+	MX31_PIN_SD29		= IOMUX_PIN(0xff, 234),
+	MX31_PIN_SD28		= IOMUX_PIN(0xff, 235),
+	MX31_PIN_SD27		= IOMUX_PIN(0xff, 236),
+	MX31_PIN_SD26		= IOMUX_PIN(0xff, 237),
+	MX31_PIN_SD25		= IOMUX_PIN(0xff, 238),
+	MX31_PIN_SD24		= IOMUX_PIN(0xff, 239),
+	MX31_PIN_SD23		= IOMUX_PIN(0xff, 240),
+	MX31_PIN_SD22		= IOMUX_PIN(0xff, 241),
+	MX31_PIN_SD21		= IOMUX_PIN(0xff, 242),
+	MX31_PIN_SD20		= IOMUX_PIN(0xff, 243),
+	MX31_PIN_SD19		= IOMUX_PIN(0xff, 244),
+	MX31_PIN_SD18		= IOMUX_PIN(0xff, 245),
+	MX31_PIN_SD17		= IOMUX_PIN(0xff, 246),
+	MX31_PIN_SD16		= IOMUX_PIN(0xff, 247),
+	MX31_PIN_SD15		= IOMUX_PIN(0xff, 248),
+	MX31_PIN_SD14		= IOMUX_PIN(0xff, 249),
+	MX31_PIN_SD13		= IOMUX_PIN(0xff, 250),
+	MX31_PIN_SD12		= IOMUX_PIN(0xff, 251),
+	MX31_PIN_SD11		= IOMUX_PIN(0xff, 252),
+	MX31_PIN_SD10		= IOMUX_PIN(0xff, 253),
+	MX31_PIN_SD9		= IOMUX_PIN(0xff, 254),
+	MX31_PIN_SD8		= IOMUX_PIN(0xff, 255),
+	MX31_PIN_SD7		= IOMUX_PIN(0xff, 256),
+	MX31_PIN_SD6		= IOMUX_PIN(0xff, 257),
+	MX31_PIN_SD5		= IOMUX_PIN(0xff, 258),
+	MX31_PIN_SD4		= IOMUX_PIN(0xff, 259),
+	MX31_PIN_SD3		= IOMUX_PIN(0xff, 260),
+	MX31_PIN_SD2		= IOMUX_PIN(0xff, 261),
+	MX31_PIN_SD1		= IOMUX_PIN(0xff, 262),
+	MX31_PIN_SD0		= IOMUX_PIN(0xff, 263),
+	MX31_PIN_SDBA0		= IOMUX_PIN(0xff, 264),
+	MX31_PIN_SDBA1		= IOMUX_PIN(0xff, 265),
+	MX31_PIN_A25		= IOMUX_PIN(0xff, 266),
+	MX31_PIN_A24		= IOMUX_PIN(0xff, 267),
+	MX31_PIN_A23		= IOMUX_PIN(0xff, 268),
+	MX31_PIN_A22		= IOMUX_PIN(0xff, 269),
+	MX31_PIN_A21		= IOMUX_PIN(0xff, 270),
+	MX31_PIN_A20		= IOMUX_PIN(0xff, 271),
+	MX31_PIN_A19		= IOMUX_PIN(0xff, 272),
+	MX31_PIN_A18		= IOMUX_PIN(0xff, 273),
+	MX31_PIN_A17		= IOMUX_PIN(0xff, 274),
+	MX31_PIN_A16		= IOMUX_PIN(0xff, 275),
+	MX31_PIN_A14		= IOMUX_PIN(0xff, 276),
+	MX31_PIN_A15		= IOMUX_PIN(0xff, 277),
+	MX31_PIN_A13		= IOMUX_PIN(0xff, 278),
+	MX31_PIN_A12		= IOMUX_PIN(0xff, 279),
+	MX31_PIN_A11		= IOMUX_PIN(0xff, 280),
+	MX31_PIN_MA10		= IOMUX_PIN(0xff, 281),
+	MX31_PIN_A10		= IOMUX_PIN(0xff, 282),
+	MX31_PIN_A9		= IOMUX_PIN(0xff, 283),
+	MX31_PIN_A8		= IOMUX_PIN(0xff, 284),
+	MX31_PIN_A7		= IOMUX_PIN(0xff, 285),
+	MX31_PIN_A6		= IOMUX_PIN(0xff, 286),
+	MX31_PIN_A5		= IOMUX_PIN(0xff, 287),
+	MX31_PIN_A4		= IOMUX_PIN(0xff, 288),
+	MX31_PIN_A3		= IOMUX_PIN(0xff, 289),
+	MX31_PIN_A2		= IOMUX_PIN(0xff, 290),
+	MX31_PIN_A1		= IOMUX_PIN(0xff, 291),
+	MX31_PIN_A0		= IOMUX_PIN(0xff, 292),
+	MX31_PIN_VPG1		= IOMUX_PIN(0xff, 293),
+	MX31_PIN_VPG0		= IOMUX_PIN(0xff, 294),
+	MX31_PIN_DVFS1		= IOMUX_PIN(0xff, 295),
+	MX31_PIN_DVFS0		= IOMUX_PIN(0xff, 296),
+	MX31_PIN_VSTBY		= IOMUX_PIN(0xff, 297),
+	MX31_PIN_POWER_FAIL	= IOMUX_PIN(0xff, 298),
+	MX31_PIN_CKIL		= IOMUX_PIN(0xff, 299),
+	MX31_PIN_BOOT_MODE4	= IOMUX_PIN(0xff, 300),
+	MX31_PIN_BOOT_MODE3	= IOMUX_PIN(0xff, 301),
+	MX31_PIN_BOOT_MODE2	= IOMUX_PIN(0xff, 302),
+	MX31_PIN_BOOT_MODE1	= IOMUX_PIN(0xff, 303),
+	MX31_PIN_BOOT_MODE0	= IOMUX_PIN(0xff, 304),
+	MX31_PIN_CLKO		= IOMUX_PIN(0xff, 305),
+	MX31_PIN_POR_B		= IOMUX_PIN(0xff, 306),
+	MX31_PIN_RESET_IN_B	= IOMUX_PIN(0xff, 307),
+	MX31_PIN_CKIH		= IOMUX_PIN(0xff, 308),
+	MX31_PIN_SIMPD0		= IOMUX_PIN(35,   309),
+	MX31_PIN_SRX0		= IOMUX_PIN(34,   310),
+	MX31_PIN_STX0		= IOMUX_PIN(33,   311),
+	MX31_PIN_SVEN0		= IOMUX_PIN(32,   312),
+	MX31_PIN_SRST0		= IOMUX_PIN(67,   313),
+	MX31_PIN_SCLK0		= IOMUX_PIN(66,   314),
+	MX31_PIN_GPIO3_1	= IOMUX_PIN(65,   315),
+	MX31_PIN_GPIO3_0	= IOMUX_PIN(64,   316),
+	MX31_PIN_GPIO1_6	= IOMUX_PIN( 6,   317),
+	MX31_PIN_GPIO1_5	= IOMUX_PIN( 5,   318),
+	MX31_PIN_GPIO1_4	= IOMUX_PIN( 4,   319),
+	MX31_PIN_GPIO1_3	= IOMUX_PIN( 3,   320),
+	MX31_PIN_GPIO1_2	= IOMUX_PIN( 2,   321),
+	MX31_PIN_GPIO1_1	= IOMUX_PIN( 1,   322),
+	MX31_PIN_GPIO1_0	= IOMUX_PIN( 0,   323),
+	MX31_PIN_PWMO		= IOMUX_PIN( 9,   324),
+	MX31_PIN_WATCHDOG_RST	= IOMUX_PIN(0xff, 325),
+	MX31_PIN_COMPARE	= IOMUX_PIN( 8,   326),
+	MX31_PIN_CAPTURE	= IOMUX_PIN( 7,   327),
+};
+
+/*
+ * Convenience values for use with mxc_iomux_mode()
+ *
+ * Format here is MX31_PIN_(pin name)__(function)
+ */
+#define MX31_PIN_CSPI3_MOSI__RXD3	IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI3_MISO__TXD3	IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CTS1__CTS1		IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RTS1__RTS1		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_TXD1__TXD1		IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RXD1__RXD1		IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
+
+/*
+ * This function configures the pad value for a IOMUX pin.
+ */
+void mxc_iomux_set_pad(enum iomux_pins, u32);
+
+#endif
+
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
new file mode 100644
index 000000000000..228c4f68ccdf
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -0,0 +1,16 @@
+/*
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_IRQS_H__
+#define __ASM_ARCH_MXC_IRQS_H__
+
+#include <mach/hardware.h>
+
+#endif /* __ASM_ARCH_MXC_IRQS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
new file mode 100644
index 000000000000..d7a8d3ebed57
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/memory.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MEMORY_H__
+#define __ASM_ARCH_MXC_MEMORY_H__
+
+#include <mach/hardware.h>
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * This macro is used to translate the virtual address to an address
+ * suitable to be passed to set_dma_addr()
+ */
+#define __virt_to_bus(a)	__virt_to_phys(a)
+
+/*
+ * Used to convert an address for DMA operations to an address that the
+ * kernel can use.
+ */
+#define __bus_to_virt(a)	__phys_to_virt(a)
+
+#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
new file mode 100644
index 000000000000..212ecc246626
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -0,0 +1,302 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX27_H__
+#define __ASM_ARCH_MXC_MX27_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/* IRAM */
+#define IRAM_BASE_ADDR          0xFFFF4C00	/* internal ram */
+
+/* Register offests */
+#define AIPI_BASE_ADDR          0x10000000
+#define AIPI_BASE_ADDR_VIRT     0xF4000000
+#define AIPI_SIZE               SZ_1M
+
+#define DMA_BASE_ADDR           (AIPI_BASE_ADDR + 0x01000)
+#define WDOG_BASE_ADDR          (AIPI_BASE_ADDR + 0x02000)
+#define GPT1_BASE_ADDR          (AIPI_BASE_ADDR + 0x03000)
+#define GPT2_BASE_ADDR          (AIPI_BASE_ADDR + 0x04000)
+#define GPT3_BASE_ADDR          (AIPI_BASE_ADDR + 0x05000)
+#define PWM_BASE_ADDR           (AIPI_BASE_ADDR + 0x06000)
+#define RTC_BASE_ADDR           (AIPI_BASE_ADDR + 0x07000)
+#define KPP_BASE_ADDR           (AIPI_BASE_ADDR + 0x08000)
+#define OWIRE_BASE_ADDR         (AIPI_BASE_ADDR + 0x09000)
+#define UART1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0A000)
+#define UART2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0B000)
+#define UART3_BASE_ADDR         (AIPI_BASE_ADDR + 0x0C000)
+#define UART4_BASE_ADDR         (AIPI_BASE_ADDR + 0x0D000)
+#define CSPI1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0E000)
+#define CSPI2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0F000)
+#define SSI1_BASE_ADDR          (AIPI_BASE_ADDR + 0x10000)
+#define SSI2_BASE_ADDR          (AIPI_BASE_ADDR + 0x11000)
+#define I2C_BASE_ADDR           (AIPI_BASE_ADDR + 0x12000)
+#define SDHC1_BASE_ADDR         (AIPI_BASE_ADDR + 0x13000)
+#define SDHC2_BASE_ADDR         (AIPI_BASE_ADDR + 0x14000)
+#define GPIO_BASE_ADDR          (AIPI_BASE_ADDR + 0x15000)
+#define AUDMUX_BASE_ADDR        (AIPI_BASE_ADDR + 0x16000)
+
+#define CSPI3_BASE_ADDR         (AIPI_BASE_ADDR + 0x17000)
+#define MSHC_BASE_ADDR          (AIPI_BASE_ADDR + 0x18000)
+#define GPT5_BASE_ADDR          (AIPI_BASE_ADDR + 0x19000)
+#define GPT4_BASE_ADDR          (AIPI_BASE_ADDR + 0x1A000)
+#define UART5_BASE_ADDR         (AIPI_BASE_ADDR + 0x1B000)
+#define UART6_BASE_ADDR         (AIPI_BASE_ADDR + 0x1C000)
+#define I2C2_BASE_ADDR          (AIPI_BASE_ADDR + 0x1D000)
+#define SDHC3_BASE_ADDR         (AIPI_BASE_ADDR + 0x1E000)
+#define GPT6_BASE_ADDR          (AIPI_BASE_ADDR + 0x1F000)
+
+#define LCDC_BASE_ADDR          (AIPI_BASE_ADDR + 0x21000)
+#define SLCDC_BASE_ADDR         (AIPI_BASE_ADDR + 0x22000)
+#define VPU_BASE_ADDR           (AIPI_BASE_ADDR + 0x23000)
+#define USBOTG_BASE_ADDR        (AIPI_BASE_ADDR + 0x24000)
+/* for mx27*/
+#define OTG_BASE_ADDR           USBOTG_BASE_ADDR
+#define SAHARA_BASE_ADDR        (AIPI_BASE_ADDR + 0x25000)
+#define EMMA_BASE_ADDR          (AIPI_BASE_ADDR + 0x26400)
+#define CCM_BASE_ADDR           (AIPI_BASE_ADDR + 0x27000)
+#define SYSCTRL_BASE_ADDR       (AIPI_BASE_ADDR + 0x27800)
+#define IIM_BASE_ADDR           (AIPI_BASE_ADDR + 0x28000)
+
+#define RTIC_BASE_ADDR          (AIPI_BASE_ADDR + 0x2A000)
+#define FEC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2B000)
+#define SCC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2C000)
+#define ETB_BASE_ADDR           (AIPI_BASE_ADDR + 0x3B000)
+#define ETB_RAM_BASE_ADDR       (AIPI_BASE_ADDR + 0x3C000)
+
+#define JAM_BASE_ADDR           (AIPI_BASE_ADDR + 0x3E000)
+#define MAX_BASE_ADDR           (AIPI_BASE_ADDR + 0x3F000)
+
+/* ROMP and AVIC */
+#define ROMP_BASE_ADDR          0x10041000
+
+#define AVIC_BASE_ADDR          0x10040000
+
+#define SAHB1_BASE_ADDR         0x80000000
+#define SAHB1_BASE_ADDR_VIRT    0xF4100000
+#define SAHB1_SIZE              SZ_1M
+
+#define CSI_BASE_ADDR           (SAHB1_BASE_ADDR + 0x0000)
+#define ATA_BASE_ADDR           (SAHB1_BASE_ADDR + 0x1000)
+
+/* NAND, SDRAM, WEIM, M3IF, EMI controllers */
+#define X_MEMC_BASE_ADDR        0xD8000000
+#define X_MEMC_BASE_ADDR_VIRT   0xF4200000
+#define X_MEMC_SIZE             SZ_1M
+
+#define NFC_BASE_ADDR           (X_MEMC_BASE_ADDR)
+#define SDRAMC_BASE_ADDR        (X_MEMC_BASE_ADDR + 0x1000)
+#define WEIM_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x2000)
+#define M3IF_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x3000)
+#define PCMCIA_CTL_BASE_ADDR    (X_MEMC_BASE_ADDR + 0x4000)
+
+/* Memory regions and CS */
+#define SDRAM_BASE_ADDR		0xA0000000
+#define CSD1_BASE_ADDR		0xB0000000
+
+#define CS0_BASE_ADDR           0xC0000000
+#define CS1_BASE_ADDR           0xC8000000
+#define CS2_BASE_ADDR           0xD0000000
+#define CS3_BASE_ADDR           0xD2000000
+#define CS4_BASE_ADDR           0xD4000000
+#define CS5_BASE_ADDR           0xD6000000
+#define PCMCIA_MEM_BASE_ADDR    0xDC000000
+
+/*
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+#define IO_ADDRESS(x)   \
+	(((x >= AIPI_BASE_ADDR) && (x < (AIPI_BASE_ADDR + AIPI_SIZE))) ? \
+		AIPI_IO_ADDRESS(x) : \
+	((x >= SAHB1_BASE_ADDR) && (x < (SAHB1_BASE_ADDR + SAHB1_SIZE))) ? \
+		SAHB1_IO_ADDRESS(x) : \
+	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? \
+		X_MEMC_IO_ADDRESS(x) : 0xDEADBEEF)
+
+/* define the address mapping macros: in physical address order */
+#define AIPI_IO_ADDRESS(x)  \
+	(((x) - AIPI_BASE_ADDR) + AIPI_BASE_ADDR_VIRT)
+
+#define AVIC_IO_ADDRESS(x)	AIPI_IO_ADDRESS(x)
+
+#define SAHB1_IO_ADDRESS(x)  \
+	(((x) - SAHB1_BASE_ADDR) + SAHB1_BASE_ADDR_VIRT)
+
+#define CS4_IO_ADDRESS(x)  \
+	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+
+#define X_MEMC_IO_ADDRESS(x)  \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+#define PCMCIA_IO_ADDRESS(x) \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+/* fixed interrput numbers */
+#define MXC_INT_CCM		63
+#define MXC_INT_IIM		62
+#define MXC_INT_LCDC		61
+#define MXC_INT_SLCDC		60
+#define MXC_INT_SAHARA		59
+#define MXC_INT_SCC_SCM		58
+#define MXC_INT_SCC_SMN		57
+#define MXC_INT_USB3		56
+#define MXC_INT_USB2		55
+#define MXC_INT_USB1		54
+#define MXC_INT_VPU		53
+#define MXC_INT_EMMAPP		52
+#define MXC_INT_EMMAPRP		51
+#define MXC_INT_FEC		50
+#define MXC_INT_UART5		49
+#define MXC_INT_UART6		48
+#define MXC_INT_DMACH15		47
+#define MXC_INT_DMACH14		46
+#define MXC_INT_DMACH13		45
+#define MXC_INT_DMACH12		44
+#define MXC_INT_DMACH11		43
+#define MXC_INT_DMACH10		42
+#define MXC_INT_DMACH9		41
+#define MXC_INT_DMACH8		40
+#define MXC_INT_DMACH7		39
+#define MXC_INT_DMACH6		38
+#define MXC_INT_DMACH5		37
+#define MXC_INT_DMACH4		36
+#define MXC_INT_DMACH3		35
+#define MXC_INT_DMACH2		34
+#define MXC_INT_DMACH1		33
+#define MXC_INT_DMACH0		32
+#define MXC_INT_CSI		31
+#define MXC_INT_ATA		30
+#define MXC_INT_NANDFC		29
+#define MXC_INT_PCMCIA		28
+#define MXC_INT_WDOG		27
+#define MXC_INT_GPT1		26
+#define MXC_INT_GPT2		25
+#define MXC_INT_GPT3		24
+#define MXC_INT_GPT		INT_GPT1
+#define MXC_INT_PWM		23
+#define MXC_INT_RTC		22
+#define MXC_INT_KPP		21
+#define MXC_INT_UART1		20
+#define MXC_INT_UART2		19
+#define MXC_INT_UART3		18
+#define MXC_INT_UART4		17
+#define MXC_INT_CSPI1		16
+#define MXC_INT_CSPI2		15
+#define MXC_INT_SSI1		14
+#define MXC_INT_SSI2		13
+#define MXC_INT_I2C		12
+#define MXC_INT_SDHC1		11
+#define MXC_INT_SDHC2		10
+#define MXC_INT_SDHC3		9
+#define MXC_INT_GPIO		8
+#define MXC_INT_SDHC		7
+#define MXC_INT_CSPI3		6
+#define MXC_INT_RTIC		5
+#define MXC_INT_GPT4		4
+#define MXC_INT_GPT5		3
+#define MXC_INT_GPT6		2
+#define MXC_INT_I2C2		1
+
+/* fixed DMA request numbers */
+#define DMA_REQ_NFC             37
+#define DMA_REQ_SDHC3           36
+#define DMA_REQ_UART6_RX        35
+#define DMA_REQ_UART6_TX        34
+#define DMA_REQ_UART5_RX        33
+#define DMA_REQ_UART5_TX        32
+#define DMA_REQ_CSI_RX          31
+#define DMA_REQ_CSI_STAT        30
+#define DMA_REQ_ATA_RCV         29
+#define DMA_REQ_ATA_TX          28
+#define DMA_REQ_UART1_TX        27
+#define DMA_REQ_UART1_RX        26
+#define DMA_REQ_UART2_TX        25
+#define DMA_REQ_UART2_RX        24
+#define DMA_REQ_UART3_TX        23
+#define DMA_REQ_UART3_RX        22
+#define DMA_REQ_UART4_TX        21
+#define DMA_REQ_UART4_RX        20
+#define DMA_REQ_CSPI1_TX        19
+#define DMA_REQ_CSPI1_RX        18
+#define DMA_REQ_CSPI2_TX        17
+#define DMA_REQ_CSPI2_RX        16
+#define DMA_REQ_SSI1_TX1        15
+#define DMA_REQ_SSI1_RX1        14
+#define DMA_REQ_SSI1_TX0        13
+#define DMA_REQ_SSI1_RX0        12
+#define DMA_REQ_SSI2_TX1        11
+#define DMA_REQ_SSI2_RX1        10
+#define DMA_REQ_SSI2_TX0        9
+#define DMA_REQ_SSI2_RX0        8
+#define DMA_REQ_SDHC1           7
+#define DMA_REQ_SDHC2           6
+#define DMA_REQ_MSHC            4
+#define DMA_REQ_EXT             3
+#define DMA_REQ_CSPI3_TX        2
+#define DMA_REQ_CSPI3_RX        1
+
+/* silicon revisions specific to i.MX27 */
+#define CHIP_REV_1_0		0x00
+#define CHIP_REV_2_0		0x01
+
+#ifndef __ASSEMBLY__
+extern int mx27_revision(void);
+#endif
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR		 	0x1C
+#define GPIO_GDIR	 	0x00
+#define GPIO_PSR	 	0x24
+#define GPIO_ICR1	 	0x28
+#define GPIO_ICR2	 	0x2C
+#define GPIO_IMR	 	0x30
+#define GPIO_ISR	 	0x34
+#define GPIO_INT_LOW_LEV	0x3
+#define GPIO_INT_HIGH_LEV	0x2
+#define GPIO_INT_RISE_EDGE 	0x0
+#define GPIO_INT_FALL_EDGE	0x1
+#define GPIO_INT_NONE		0x4
+
+/* Mandatory defines used globally */
+
+/* this is an i.MX27 CPU */
+#define cpu_is_mx27()		(1)
+
+/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
+#define ARCH_NR_GPIOS		(192 + 16)
+
+/* OS clock tick rate */
+#define CLOCK_TICK_RATE         13300000
+
+/* Start of RAM */
+#define PHYS_OFFSET		SDRAM_BASE_ADDR
+
+/* max interrupt lines count */
+#define NR_IRQS			256
+
+/* count of internal interrupt sources */
+#define MXC_MAX_INT_LINES	64
+
+#endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
new file mode 100644
index 000000000000..a7373e4a56cb
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -0,0 +1,384 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX31_H__
+#define __ASM_ARCH_MXC_MX31_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/*!
+ * defines the hardware clock tick rate
+ */
+#define CLOCK_TICK_RATE		16625000
+
+/*
+ * MX31 memory map:
+ *
+ * Virt		Phys		Size	What
+ * ---------------------------------------------------------------------------
+ * F8000000	1FFC0000	16K	IRAM
+ * F9000000	30000000	256M	L2CC
+ * FC000000	43F00000	1M	AIPS 1
+ * FC100000	50000000	1M	SPBA
+ * FC200000	53F00000	1M	AIPS 2
+ * FC500000	60000000	128M	ROMPATCH
+ * FC400000	68000000	128M	AVIC
+ *         	70000000	256M	IPU (MAX M2)
+ *         	80000000	256M	CSD0 SDRAM/DDR
+ *         	90000000	256M	CSD1 SDRAM/DDR
+ *         	A0000000	128M	CS0 Flash
+ *         	A8000000	128M	CS1 Flash
+ *         	B0000000	32M	CS2
+ *         	B2000000	32M	CS3
+ * F4000000	B4000000	32M	CS4
+ *         	B6000000	32M	CS5
+ * FC320000	B8000000	64K	NAND, SDRAM, WEIM, M3IF, EMI controllers
+ *         	C0000000	64M	PCMCIA/CF
+ */
+
+#define CS0_BASE_ADDR		0xA0000000
+#define CS1_BASE_ADDR		0xA8000000
+#define CS2_BASE_ADDR		0xB0000000
+#define CS3_BASE_ADDR		0xB2000000
+
+#define CS4_BASE_ADDR		0xB4000000
+#define CS4_BASE_ADDR_VIRT	0xF4000000
+#define CS4_SIZE		SZ_32M
+
+#define CS5_BASE_ADDR		0xB6000000
+#define PCMCIA_MEM_BASE_ADDR	0xBC000000
+
+/*
+ * IRAM
+ */
+#define IRAM_BASE_ADDR		0x1FFC0000	/* internal ram */
+#define IRAM_BASE_ADDR_VIRT	0xF8000000
+#define IRAM_SIZE		SZ_16K
+
+/*
+ * L2CC
+ */
+#define L2CC_BASE_ADDR		0x30000000
+#define L2CC_BASE_ADDR_VIRT	0xF9000000
+#define L2CC_SIZE		SZ_1M
+
+/*
+ * AIPS 1
+ */
+#define AIPS1_BASE_ADDR		0x43F00000
+#define AIPS1_BASE_ADDR_VIRT	0xFC000000
+#define AIPS1_SIZE		SZ_1M
+
+#define MAX_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00004000)
+#define EVTMON_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00008000)
+#define CLKCTL_BASE_ADDR	(AIPS1_BASE_ADDR + 0x0000C000)
+#define ETB_SLOT4_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00010000)
+#define ETB_SLOT5_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00014000)
+#define ECT_CTIO_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00018000)
+#define I2C_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00080000)
+#define I2C3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00084000)
+#define OTG_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00088000)
+#define ATA_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0008C000)
+#define UART1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00090000)
+#define UART2_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00094000)
+#define I2C2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00098000)
+#define OWIRE_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x0009C000)
+#define SSI1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A0000)
+#define CSPI1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000A4000)
+#define KPP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A8000)
+#define IOMUXC_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000AC000)
+#define UART4_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B0000)
+#define UART5_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B4000)
+#define ECT_IP1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000B8000)
+#define ECT_IP2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000BC000)
+
+/*
+ * SPBA global module enabled #0
+ */
+#define SPBA0_BASE_ADDR 	0x50000000
+#define SPBA0_BASE_ADDR_VIRT	0xFC100000
+#define SPBA0_SIZE		SZ_1M
+
+#define MMC_SDHC1_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00004000)
+#define MMC_SDHC2_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00008000)
+#define UART3_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x0000C000)
+#define CSPI2_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x00010000)
+#define SSI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00014000)
+#define SIM1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00018000)
+#define IIM_BASE_ADDR		(SPBA0_BASE_ADDR + 0x0001C000)
+#define ATA_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00020000)
+#define MSHC1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
+#define MSHC2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
+#define SPBA_CTRL_BASE_ADDR	(SPBA0_BASE_ADDR + 0x0003C000)
+
+/*
+ * AIPS 2
+ */
+#define AIPS2_BASE_ADDR		0x53F00000
+#define AIPS2_BASE_ADDR_VIRT	0xFC200000
+#define AIPS2_SIZE		SZ_1M
+#define CCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00080000)
+#define CSPI3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00084000)
+#define FIRI_BASE_ADDR		(AIPS2_BASE_ADDR + 0x0008C000)
+#define GPT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00090000)
+#define EPIT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00094000)
+#define EPIT2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00098000)
+#define GPIO3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000A4000)
+#define SCC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AC000)
+#define SCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AE000)
+#define SMN_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AF000)
+#define RNGA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B0000)
+#define IPU_CTRL_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C0000)
+#define AUDMUX_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C4000)
+#define MPEG4_ENC_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C8000)
+#define GPIO1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000CC000)
+#define GPIO2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D0000)
+#define SDMA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D4000)
+#define RTC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D8000)
+#define WDOG_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DC000)
+#define PWM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E0000)
+#define RTIC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000EC000)
+
+/*
+ * ROMP and AVIC
+ */
+#define ROMP_BASE_ADDR		0x60000000
+#define ROMP_BASE_ADDR_VIRT	0xFC500000
+#define ROMP_SIZE		SZ_1M
+
+#define AVIC_BASE_ADDR		0x68000000
+#define AVIC_BASE_ADDR_VIRT	0xFC400000
+#define AVIC_SIZE		SZ_1M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define X_MEMC_BASE_ADDR	0xB8000000
+#define X_MEMC_BASE_ADDR_VIRT	0xFC320000
+#define X_MEMC_SIZE		SZ_64K
+
+#define NFC_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x0000)
+#define ESDCTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x1000)
+#define WEIM_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x2000)
+#define M3IF_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x3000)
+#define EMI_CTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x4000)
+#define PCMCIA_CTL_BASE_ADDR	EMI_CTL_BASE_ADDR
+
+/*
+ * Memory regions and CS
+ */
+#define IPU_MEM_BASE_ADDR	0x70000000
+#define CSD0_BASE_ADDR		0x80000000
+#define CSD1_BASE_ADDR		0x90000000
+#define CS0_BASE_ADDR		0xA0000000
+#define CS1_BASE_ADDR		0xA8000000
+#define CS2_BASE_ADDR		0xB0000000
+#define CS3_BASE_ADDR		0xB2000000
+
+#define CS4_BASE_ADDR		0xB4000000
+#define CS4_BASE_ADDR_VIRT	0xF4000000
+#define CS4_SIZE		SZ_32M
+
+#define CS5_BASE_ADDR		0xB6000000
+#define PCMCIA_MEM_BASE_ADDR	0xBC000000
+
+/*!
+ * This macro defines the physical to virtual address mapping for all the
+ * peripheral modules. It is used by passing in the physical address as x
+ * and returning the virtual address. If the physical address is not mapped,
+ * it returns 0xDEADBEEF
+ */
+#define IO_ADDRESS(x)   \
+	(((x >= IRAM_BASE_ADDR) && (x < (IRAM_BASE_ADDR + IRAM_SIZE))) ? IRAM_IO_ADDRESS(x):\
+	((x >= L2CC_BASE_ADDR) && (x < (L2CC_BASE_ADDR + L2CC_SIZE))) ? L2CC_IO_ADDRESS(x):\
+	((x >= AIPS1_BASE_ADDR) && (x < (AIPS1_BASE_ADDR + AIPS1_SIZE))) ? AIPS1_IO_ADDRESS(x):\
+	((x >= SPBA0_BASE_ADDR) && (x < (SPBA0_BASE_ADDR + SPBA0_SIZE))) ? SPBA0_IO_ADDRESS(x):\
+	((x >= AIPS2_BASE_ADDR) && (x < (AIPS2_BASE_ADDR + AIPS2_SIZE))) ? AIPS2_IO_ADDRESS(x):\
+	((x >= ROMP_BASE_ADDR) && (x < (ROMP_BASE_ADDR + ROMP_SIZE))) ? ROMP_IO_ADDRESS(x):\
+	((x >= AVIC_BASE_ADDR) && (x < (AVIC_BASE_ADDR + AVIC_SIZE))) ? AVIC_IO_ADDRESS(x):\
+	((x >= CS4_BASE_ADDR) && (x < (CS4_BASE_ADDR + CS4_SIZE))) ? CS4_IO_ADDRESS(x):\
+	((x >= X_MEMC_BASE_ADDR) && (x < (X_MEMC_BASE_ADDR + X_MEMC_SIZE))) ? X_MEMC_IO_ADDRESS(x):\
+	0xDEADBEEF)
+
+/*
+ * define the address mapping macros: in physical address order
+ */
+
+#define IRAM_IO_ADDRESS(x)  \
+	(((x) - IRAM_BASE_ADDR) + IRAM_BASE_ADDR_VIRT)
+
+#define L2CC_IO_ADDRESS(x)  \
+	(((x) - L2CC_BASE_ADDR) + L2CC_BASE_ADDR_VIRT)
+
+#define AIPS1_IO_ADDRESS(x)  \
+	(((x) - AIPS1_BASE_ADDR) + AIPS1_BASE_ADDR_VIRT)
+
+#define SPBA0_IO_ADDRESS(x)  \
+	(((x) - SPBA0_BASE_ADDR) + SPBA0_BASE_ADDR_VIRT)
+
+#define AIPS2_IO_ADDRESS(x)  \
+	(((x) - AIPS2_BASE_ADDR) + AIPS2_BASE_ADDR_VIRT)
+
+#define ROMP_IO_ADDRESS(x)  \
+	(((x) - ROMP_BASE_ADDR) + ROMP_BASE_ADDR_VIRT)
+
+#define AVIC_IO_ADDRESS(x)  \
+	(((x) - AVIC_BASE_ADDR) + AVIC_BASE_ADDR_VIRT)
+
+#define CS4_IO_ADDRESS(x)  \
+	(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+
+#define X_MEMC_IO_ADDRESS(x)  \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+#define PCMCIA_IO_ADDRESS(x) \
+	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+
+/* Start of physical RAM - On many MX31 platforms, this is the first SDRAM bank (CSD0) */
+#define PHYS_OFFSET             CSD0_BASE_ADDR
+
+/*
+ * Interrupt numbers
+ */
+#define MXC_INT_PEN_ADS7843	0
+#define MXC_INT_RESV1		1
+#define MXC_INT_CS8900A		2
+#define MXC_INT_I2C3		3
+#define MXC_INT_I2C2		4
+#define MXC_INT_MPEG4_ENCODER	5
+#define MXC_INT_RTIC		6
+#define MXC_INT_FIRI		7
+#define MXC_INT_MMC_SDHC2	8
+#define MXC_INT_MMC_SDHC1	9
+#define MXC_INT_I2C		10
+#define MXC_INT_SSI2		11
+#define MXC_INT_SSI1		12
+#define MXC_INT_CSPI2		13
+#define MXC_INT_CSPI1		14
+#define MXC_INT_ATA		15
+#define MXC_INT_MBX		16
+#define MXC_INT_CSPI3		17
+#define MXC_INT_UART3		18
+#define MXC_INT_IIM		19
+#define MXC_INT_SIM2		20
+#define MXC_INT_SIM1		21
+#define MXC_INT_RNGA		22
+#define MXC_INT_EVTMON		23
+#define MXC_INT_KPP		24
+#define MXC_INT_RTC		25
+#define MXC_INT_PWM		26
+#define MXC_INT_EPIT2		27
+#define MXC_INT_EPIT1		28
+#define MXC_INT_GPT		29
+#define MXC_INT_RESV30		30
+#define MXC_INT_RESV31		31
+#define MXC_INT_UART2		32
+#define MXC_INT_NANDFC		33
+#define MXC_INT_SDMA		34
+#define MXC_INT_USB1		35
+#define MXC_INT_USB2		36
+#define MXC_INT_USB3		37
+#define MXC_INT_USB4		38
+#define MXC_INT_MSHC1		39
+#define MXC_INT_MSHC2		40
+#define MXC_INT_IPU_ERR		41
+#define MXC_INT_IPU_SYN		42
+#define MXC_INT_RESV43		43
+#define MXC_INT_RESV44		44
+#define MXC_INT_UART1		45
+#define MXC_INT_UART4		46
+#define MXC_INT_UART5		47
+#define MXC_INT_ECT		48
+#define MXC_INT_SCC_SCM		49
+#define MXC_INT_SCC_SMN		50
+#define MXC_INT_GPIO2		51
+#define MXC_INT_GPIO1		52
+#define MXC_INT_CCM		53
+#define MXC_INT_PCMCIA		54
+#define MXC_INT_WDOG		55
+#define MXC_INT_GPIO3		56
+#define MXC_INT_RESV57		57
+#define MXC_INT_EXT_POWER	58
+#define MXC_INT_EXT_TEMPER	59
+#define MXC_INT_EXT_SENSOR60	60
+#define MXC_INT_EXT_SENSOR61	61
+#define MXC_INT_EXT_WDOG	62
+#define MXC_INT_EXT_TV		63
+
+#define MXC_MAX_INT_LINES	64
+
+#define MXC_GPIO_INT_BASE	MXC_MAX_INT_LINES
+#define MXC_MAX_GPIO_LINES      (GPIO_NUM_PIN * GPIO_PORT_NUM)
+#define MXC_MAX_VIRTUAL_INTS	16
+
+#define NR_IRQS (MXC_MAX_INT_LINES + MXC_MAX_GPIO_LINES + MXC_MAX_VIRTUAL_INTS)
+
+/*!
+ * Number of GPIO port as defined in the IC Spec
+ */
+#define GPIO_PORT_NUM		3
+/*!
+ * Number of GPIO pins per port
+ */
+#define GPIO_NUM_PIN		32
+
+#define PROD_SIGNATURE		0x1	/* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define CHIP_REV_1_0		0x10
+#define CHIP_REV_1_1		0x11
+#define CHIP_REV_1_2		0x12
+#define CHIP_REV_1_3		0x13
+#define CHIP_REV_2_0		0x20
+#define CHIP_REV_2_1		0x21
+#define CHIP_REV_2_2		0x22
+#define CHIP_REV_2_3		0x23
+#define CHIP_REV_3_0		0x30
+#define CHIP_REV_3_1		0x31
+#define CHIP_REV_3_2		0x32
+
+#define SYSTEM_REV_MIN		CHIP_REV_1_0
+#define SYSTEM_REV_NUM		3
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR		 	0x00
+#define GPIO_GDIR	 	0x04
+#define GPIO_PSR	 	0x08
+#define GPIO_ICR1	 	0x0C
+#define GPIO_ICR2	 	0x10
+#define GPIO_IMR	 	0x14
+#define GPIO_ISR	 	0x18
+#define GPIO_INT_LOW_LEV	0x0
+#define GPIO_INT_HIGH_LEV	0x1
+#define GPIO_INT_RISE_EDGE	0x2
+#define GPIO_INT_FALL_EDGE	0x3
+#define GPIO_INT_NONE		0x4
+
+/* Mandatory defines used globally */
+
+/* this CPU supports up to 96 GPIOs */
+#define ARCH_NR_GPIOS		96
+
+#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
+
+/* this is a i.MX31 CPU */
+#define cpu_is_mx31()		(1)
+
+extern unsigned int system_rev;
+
+static inline int mx31_revision(void)
+{
+	return system_rev;
+}
+#endif
+
+#endif /*  __ASM_ARCH_MXC_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
new file mode 100644
index 000000000000..332eda4dbd3b
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_H__
+#define __ASM_ARCH_MXC_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+/* clean up all things that are not used */
+#ifndef CONFIG_ARCH_MX3
+# define cpu_is_mx31() (0)
+#endif
+
+#ifndef CONFIG_MACH_MX27
+# define cpu_is_mx27() (0)
+#endif
+
+#endif /*  __ASM_ARCH_MXC_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc_timer.h b/arch/arm/plat-mxc/include/mach/mxc_timer.h
new file mode 100644
index 000000000000..130aebfbe168
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc_timer.h
@@ -0,0 +1,158 @@
+/*
+ * mxc_timer.h
+ *
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ *
+ * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#ifndef __PLAT_MXC_TIMER_H
+#define __PLAT_MXC_TIMER_H
+
+#include <linux/clk.h>
+#include <mach/hardware.h>
+
+#ifdef CONFIG_ARCH_IMX
+#define TIMER_BASE		IO_ADDRESS(TIM1_BASE_ADDR)
+#define TIMER_INTERRUPT		TIM1_INT
+
+#define TCTL_VAL		TCTL_CLK_PCLK1
+#define TCTL_IRQEN		(1<<4)
+#define TCTL_FRR		(1<<8)
+#define TCTL_CLK_PCLK1		(1<<1)
+#define TCTL_CLK_PCLK1_4	(2<<1)
+#define TCTL_CLK_TIN		(3<<1)
+#define TCTL_CLK_32		(4<<1)
+
+#define MXC_TCTL   0x00
+#define MXC_TPRER  0x04
+#define MXC_TCMP   0x08
+#define MXC_TCR    0x0c
+#define MXC_TCN    0x10
+#define MXC_TSTAT  0x14
+#define TSTAT_CAPT		(1<<1)
+#define TSTAT_COMP		(1<<0)
+
+static inline void gpt_irq_disable(void)
+{
+	unsigned int tmp;
+
+	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
+	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
+}
+
+static inline void gpt_irq_enable(void)
+{
+	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
+				TIMER_BASE + MXC_TCTL);
+}
+
+static void gpt_irq_acknowledge(void)
+{
+	__raw_writel(0, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_IMX */
+
+#ifdef CONFIG_ARCH_MX2
+#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
+#define TIMER_INTERRUPT		MXC_INT_GPT1
+
+#define MXC_TCTL   0x00
+#define TCTL_VAL		TCTL_CLK_PCLK1
+#define TCTL_CLK_PCLK1		(1<<1)
+#define TCTL_CLK_PCLK1_4	(2<<1)
+#define TCTL_IRQEN		(1<<4)
+#define TCTL_FRR		(1<<8)
+#define MXC_TPRER  0x04
+#define MXC_TCMP   0x08
+#define MXC_TCR    0x0c
+#define MXC_TCN    0x10
+#define MXC_TSTAT  0x14
+#define TSTAT_CAPT		(1<<1)
+#define TSTAT_COMP		(1<<0)
+
+static inline void gpt_irq_disable(void)
+{
+	unsigned int tmp;
+
+	tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
+	__raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
+}
+
+static inline void gpt_irq_enable(void)
+{
+	__raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
+				TIMER_BASE + MXC_TCTL);
+}
+
+static void gpt_irq_acknowledge(void)
+{
+	__raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_MX2 */
+
+#ifdef CONFIG_ARCH_MX3
+#define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)
+#define TIMER_INTERRUPT		MXC_INT_GPT
+
+#define MXC_TCTL   0x00
+#define TCTL_VAL		(TCTL_CLK_IPG | TCTL_WAITEN)
+#define TCTL_CLK_IPG		(1<<6)
+#define TCTL_FRR		(1<<9)
+#define TCTL_WAITEN		(1<<3)
+
+#define MXC_TPRER  0x04
+#define MXC_TSTAT  0x08
+#define TSTAT_OF1		(1<<0)
+#define TSTAT_OF2		(1<<1)
+#define TSTAT_OF3		(1<<2)
+#define TSTAT_IF1		(1<<3)
+#define TSTAT_IF2		(1<<4)
+#define TSTAT_ROV		(1<<5)
+#define MXC_IR     0x0c
+#define MXC_TCMP   0x10
+#define MXC_TCMP2  0x14
+#define MXC_TCMP3  0x18
+#define MXC_TCR    0x1c
+#define MXC_TCN    0x24
+
+static inline void gpt_irq_disable(void)
+{
+	__raw_writel(0, TIMER_BASE + MXC_IR);
+}
+
+static inline void gpt_irq_enable(void)
+{
+	__raw_writel(1<<0, TIMER_BASE + MXC_IR);
+}
+
+static inline void gpt_irq_acknowledge(void)
+{
+	__raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
+}
+#endif /* CONFIG_ARCH_MX3 */
+
+#define TCTL_SWR		(1<<15)
+#define TCTL_CC			(1<<10)
+#define TCTL_OM			(1<<9)
+#define TCTL_CAP_RIS		(1<<6)
+#define TCTL_CAP_FAL		(2<<6)
+#define TCTL_CAP_RIS_FAL	(3<<6)
+#define TCTL_CAP_ENA		(1<<5)
+#define TCTL_TEN		(1<<0)
+
+#endif
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
new file mode 100644
index 000000000000..bbfc37465fc5
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -0,0 +1,34 @@
+/*
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_SYSTEM_H__
+#define __ASM_ARCH_MXC_SYSTEM_H__
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode)
+{
+	cpu_reset(0);
+}
+
+#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h
new file mode 100644
index 000000000000..0b0af0253e91
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/timex.h
@@ -0,0 +1,25 @@
+/*
+ *  Copyright (C) 1999 ARM Limited
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_TIMEX_H__
+#define __ASM_ARCH_MXC_TIMEX_H__
+
+#include <mach/hardware.h>	/* for CLOCK_TICK_RATE */
+
+#endif				/* __ASM_ARCH_MXC_TIMEX_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
new file mode 100644
index 000000000000..de6fe0365982
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -0,0 +1,78 @@
+/*
+ *  arch/arm/plat-mxc/include/mach/uncompress.h
+ *
+ *
+ *
+ *  Copyright (C) 1999 ARM Limited
+ *  Copyright (C) Shane Nay (shane@minirl.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_MXC_UNCOMPRESS_H__
+#define __ASM_ARCH_MXC_UNCOMPRESS_H__
+
+#define __MXC_BOOT_UNCOMPRESS
+
+#include <mach/hardware.h>
+
+#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
+
+#define USR2 0x98
+#define USR2_TXFE (1<<14)
+#define TXR  0x40
+#define UCR1 0x80
+#define UCR1_UARTEN 1
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  We search for the first enabled
+ * port in the most probable order.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+
+static void putc(int ch)
+{
+	static unsigned long serial_port = 0;
+
+	if (unlikely(serial_port == 0)) {
+		do {
+			serial_port = UART1_BASE_ADDR;
+			if (UART(UCR1) & UCR1_UARTEN)
+				break;
+			serial_port = UART2_BASE_ADDR;
+			if (UART(UCR1) & UCR1_UARTEN)
+				break;
+			return;
+		} while (0);
+	}
+
+	while (!(UART(USR2) & USR2_TXFE))
+		barrier();
+
+	UART(TXR) = ch;
+}
+
+#define flush() do { } while (0)
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif				/* __ASM_ARCH_MXC_UNCOMPRESS_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/vmalloc.h b/arch/arm/plat-mxc/include/mach/vmalloc.h
new file mode 100644
index 000000000000..62d97623412f
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/vmalloc.h
@@ -0,0 +1,26 @@
+/*
+ *  Copyright (C) 2000 Russell King.
+ *  Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MXC_VMALLOC_H__
+#define __ASM_ARCH_MXC_VMALLOC_H__
+
+/* vmalloc ending address */
+#define VMALLOC_END       0xF4000000
+
+#endif /* __ASM_ARCH_MXC_VMALLOC_H__ */
diff --git a/arch/arm/plat-mxc/iomux-mx1-mx2.c b/arch/arm/plat-mxc/iomux-mx1-mx2.c
index 1985571eb40c..d97387aa9a42 100644
--- a/arch/arm/plat-mxc/iomux-mx1-mx2.c
+++ b/arch/arm/plat-mxc/iomux-mx1-mx2.c
@@ -30,9 +30,9 @@
 #include <linux/string.h>
 #include <linux/gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/map.h>
-#include <asm/arch/iomux-mx1-mx2.h>
+#include <mach/iomux-mx1-mx2.h>
 
 void mxc_gpio_mode(int gpio_mode)
 {
diff --git a/arch/arm/plat-mxc/irq.c b/arch/arm/plat-mxc/irq.c
index 1fbe01da6925..1053b666c676 100644
--- a/arch/arm/plat-mxc/irq.c
+++ b/arch/arm/plat-mxc/irq.c
@@ -19,7 +19,7 @@
 
 #include <linux/irq.h>
 #include <asm/io.h>
-#include <asm/arch/common.h>
+#include <mach/common.h>
 
 #define AVIC_BASE		IO_ADDRESS(AVIC_BASE_ADDR)
 #define AVIC_INTCNTL		(AVIC_BASE + 0x00)	/* int control reg */
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 3bf86343fdf4..fd28f5194f71 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -26,10 +26,10 @@
 #include <linux/clockchips.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach/time.h>
-#include <asm/arch/common.h>
-#include <asm/arch/mxc_timer.h>
+#include <mach/common.h>
+#include <mach/mxc_timer.h>
 
 static struct clock_event_device clockevent_mxc;
 static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index c2e741de0203..23a070599993 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -26,7 +26,7 @@
 
 #include <asm/io.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 8d04929a3c75..f4dff423ae7c 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -19,20 +19,20 @@
 #include <linux/serial_reg.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 
-#include <asm/arch/common.h>
-#include <asm/arch/board.h>
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/fpga.h>
+#include <mach/common.h>
+#include <mach/board.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/fpga.h>
 
-#include <asm/arch/clock.h>
+#include <mach/clock.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/sdrc.h"
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index d719c15daa55..ae1de308aaad 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -21,7 +21,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/system.h>
 
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index f455233af082..5b73bb274452 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -13,11 +13,11 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/gpio.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
 
 
 /* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 9128a80d228f..9422dee7de84 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -13,13 +13,13 @@
 #include <linux/leds.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <asm/arch/fpga.h>
-#include <asm/arch/gpio.h>
+#include <mach/fpga.h>
+#include <mach/gpio.h>
 
 
 /* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index 81002b722da1..187e3d8bfdfe 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -14,17 +14,17 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/tc.h>
-#include <asm/arch/board.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/menelaus.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/tc.h>
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/gpio.h>
+#include <mach/menelaus.h>
+#include <mach/mcbsp.h>
 
 #if	defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index fac8e994f588..a63b644ad305 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -28,10 +28,10 @@
 #include <linux/io.h>
 
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
-#include <asm/arch/tc.h>
+#include <mach/tc.h>
 
 #undef DEBUG
 
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index f22506af0e67..743a4abcd85d 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -32,10 +32,10 @@
 #include <linux/list.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <asm/hardware.h>
-#include <asm/arch/dmtimer.h>
+#include <mach/hardware.h>
+#include <mach/dmtimer.h>
 #include <asm/io.h>
-#include <asm/arch/irqs.h>
+#include <mach/irqs.h>
 
 /* register offsets */
 #define _OMAP_TIMER_ID_OFFSET		0x00
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index 7854f19b77cf..17a92a31e746 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -23,18 +23,18 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/bootmem.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
-#include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/sram.h>
-#include <asm/arch/omapfb.h>
+#include <mach/board.h>
+#include <mach/sram.h>
+#include <mach/omapfb.h>
 
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 
@@ -182,7 +182,7 @@ void __init omapfb_reserve_sdram(void)
 		return;
 
 	bdata = NODE_DATA(0)->bdata;
-	sdram_start = bdata->node_boot_start;
+	sdram_start = bdata->node_min_pfn << PAGE_SHIFT;
 	sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
 	reserved = 0;
 	for (i = 0; ; i++) {
@@ -340,5 +340,3 @@ unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
 
 
 #endif
-
-
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 1903a3491ee9..3e76ee2bc731 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -18,10 +18,10 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/gpio.h>
+#include <mach/irqs.h>
+#include <mach/gpio.h>
 #include <asm/mach/irq.h>
 
 #include <asm/io.h>
@@ -517,13 +517,13 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 	u32 gpio_bit = 1 << gpio;
 
 	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
-		trigger & __IRQT_LOWLVL);
+		trigger & IRQ_TYPE_LEVEL_LOW);
 	MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
-		trigger & __IRQT_HIGHLVL);
+		trigger & IRQ_TYPE_LEVEL_HIGH);
 	MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
-		trigger & __IRQT_RISEDGE);
+		trigger & IRQ_TYPE_EDGE_RISING);
 	MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
-		trigger & __IRQT_FALEDGE);
+		trigger & IRQ_TYPE_EDGE_FALLING);
 
 	if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
 		if (trigger != 0)
@@ -555,9 +555,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_MPUIO:
 		reg += OMAP_MPUIO_GPIO_INT_EDGE;
 		l = __raw_readl(reg);
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
-		else if (trigger & __IRQT_FALEDGE)
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l &= ~(1 << gpio);
 		else
 			goto bad;
@@ -567,9 +567,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
-		else if (trigger & __IRQT_FALEDGE)
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l &= ~(1 << gpio);
 		else
 			goto bad;
@@ -584,9 +584,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 		gpio &= 0x07;
 		l = __raw_readl(reg);
 		l &= ~(3 << (gpio << 1));
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 2 << (gpio << 1);
-		if (trigger & __IRQT_FALEDGE)
+		if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l |= 1 << (gpio << 1);
 		if (trigger)
 			/* Enable wake-up during idle for dynamic tick */
@@ -599,9 +599,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_GPIO_730:
 		reg += OMAP730_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
-		if (trigger & __IRQT_RISEDGE)
+		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
-		else if (trigger & __IRQT_FALEDGE)
+		else if (trigger & IRQ_TYPE_EDGE_FALLING)
 			l &= ~(1 << gpio);
 		else
 			goto bad;
@@ -887,7 +887,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio)
 	_set_gpio_direction(bank, get_gpio_index(gpio), 1);
 	_set_gpio_irqenable(bank, gpio, 0);
 	_clear_gpio_irqstatus(bank, gpio);
-	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 }
 
 /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
@@ -924,7 +924,7 @@ int omap_request_gpio(int gpio)
 	/* Set trigger to none. You need to enable the desired trigger with
 	 * request_irq() or set_irq_type().
 	 */
-	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (bank->method == METHOD_GPIO_1510) {
@@ -1488,6 +1488,9 @@ static int __init _omap_gpio_init(void)
 		bank->chip.set = gpio_set;
 		if (bank_is_mpuio(bank)) {
 			bank->chip.label = "mpuio";
+#ifdef CONFIG_ARCH_OMAP1
+			bank->chip.dev = &omap_mpuio_device.dev;
+#endif
 			bank->chip.base = OMAP_MPUIO(0);
 		} else {
 			bank->chip.label = "gpio";
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 7990ab185bb1..0e6d147ab6f8 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -26,8 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <asm/mach-types.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
diff --git a/arch/arm/plat-omap/include/mach/aic23.h b/arch/arm/plat-omap/include/mach/aic23.h
new file mode 100644
index 000000000000..5ccedac77526
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/aic23.h
@@ -0,0 +1,116 @@
+/*
+ * arch/arm/plat-omap/include/mach/aic23.h
+ *
+ * Hardware definitions for TI TLV320AIC23 audio codec
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_AIC23_H
+#define __ASM_ARCH_AIC23_H
+
+// Codec TLV320AIC23
+#define LEFT_LINE_VOLUME_ADDR		0x00
+#define RIGHT_LINE_VOLUME_ADDR		0x01
+#define LEFT_CHANNEL_VOLUME_ADDR	0x02
+#define RIGHT_CHANNEL_VOLUME_ADDR	0x03
+#define ANALOG_AUDIO_CONTROL_ADDR	0x04
+#define DIGITAL_AUDIO_CONTROL_ADDR	0x05
+#define POWER_DOWN_CONTROL_ADDR		0x06
+#define DIGITAL_AUDIO_FORMAT_ADDR	0x07
+#define SAMPLE_RATE_CONTROL_ADDR	0x08
+#define DIGITAL_INTERFACE_ACT_ADDR	0x09
+#define RESET_CONTROL_ADDR		0x0F
+
+// Left (right) line input volume control register
+#define LRS_ENABLED			0x0100
+#define LIM_MUTED			0x0080
+#define LIV_DEFAULT			0x0017
+#define LIV_MAX				0x001f
+#define LIV_MIN				0x0000
+
+// Left (right) channel headphone volume control register
+#define LZC_ON				0x0080
+#define LHV_DEFAULT			0x0079
+#define LHV_MAX				0x007f
+#define LHV_MIN				0x0000
+
+// Analog audio path control register
+#define STA_REG(x)			((x)<<6)
+#define STE_ENABLED			0x0020
+#define DAC_SELECTED			0x0010
+#define BYPASS_ON			0x0008
+#define INSEL_MIC			0x0004
+#define MICM_MUTED			0x0002
+#define MICB_20DB			0x0001
+
+// Digital audio path control register
+#define DACM_MUTE			0x0008
+#define DEEMP_32K			0x0002
+#define DEEMP_44K			0x0004
+#define DEEMP_48K			0x0006
+#define ADCHP_ON			0x0001
+
+// Power control down register
+#define DEVICE_POWER_OFF	  	0x0080
+#define CLK_OFF				0x0040
+#define OSC_OFF				0x0020
+#define OUT_OFF				0x0010
+#define DAC_OFF				0x0008
+#define ADC_OFF				0x0004
+#define MIC_OFF				0x0002
+#define LINE_OFF			0x0001
+
+// Digital audio interface register
+#define MS_MASTER			0x0040
+#define LRSWAP_ON			0x0020
+#define LRP_ON				0x0010
+#define IWL_16				0x0000
+#define IWL_20				0x0004
+#define IWL_24				0x0008
+#define IWL_32				0x000C
+#define FOR_I2S				0x0002
+#define FOR_DSP				0x0003
+
+// Sample rate control register
+#define CLKOUT_HALF			0x0080
+#define CLKIN_HALF			0x0040
+#define BOSR_384fs			0x0002 // BOSR_272fs when in USB mode
+#define USB_CLK_ON			0x0001
+#define SR_MASK                         0xf
+#define CLKOUT_SHIFT                    7
+#define CLKIN_SHIFT                     6
+#define SR_SHIFT                        2
+#define BOSR_SHIFT                      1
+
+// Digital interface register
+#define ACT_ON				0x0001
+
+#define TLV320AIC23ID1                  (0x1a)	// cs low
+#define TLV320AIC23ID2                  (0x1b)	// cs high
+
+void aic23_power_up(void);
+void aic23_power_down(void);
+
+#endif /* __ASM_ARCH_AIC23_H */
diff --git a/arch/arm/plat-omap/include/mach/blizzard.h b/arch/arm/plat-omap/include/mach/blizzard.h
new file mode 100644
index 000000000000..8d160f171372
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/blizzard.h
@@ -0,0 +1,12 @@
+#ifndef _BLIZZARD_H
+#define _BLIZZARD_H
+
+struct blizzard_platform_data {
+	void		(*power_up)(struct device *dev);
+	void		(*power_down)(struct device *dev);
+	unsigned long	(*get_clock_rate)(struct device *dev);
+
+	unsigned	te_connected : 1;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/board-2430sdp.h b/arch/arm/plat-omap/include/mach/board-2430sdp.h
new file mode 100644
index 000000000000..cf1dc0223949
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-2430sdp.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-2430sdp.h
+ *
+ * Hardware definitions for TI OMAP2430 SDP board.
+ *
+ * Based on board-h4.h by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_2430SDP_H
+#define __ASM_ARCH_OMAP_2430SDP_H
+
+/* Placeholder for 2430SDP specific defines */
+#define OMAP24XX_ETHR_START		 0x08000300
+#define OMAP24XX_ETHR_GPIO_IRQ		149
+#define SDP2430_CS0_BASE		0x04000000
+
+#define TWL4030_IRQNUM			INT_24XX_SYS_NIRQ
+
+#endif /* __ASM_ARCH_OMAP_2430SDP_H */
diff --git a/arch/arm/plat-omap/include/mach/board-ams-delta.h b/arch/arm/plat-omap/include/mach/board-ams-delta.h
new file mode 100644
index 000000000000..51b102dc906b
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-ams-delta.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-ams-delta.h
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
+#define __ASM_ARCH_OMAP_AMS_DELTA_H
+
+#if defined (CONFIG_MACH_AMS_DELTA)
+
+#define AMS_DELTA_LATCH1_PHYS		0x01000000
+#define AMS_DELTA_LATCH1_VIRT		0xEA000000
+#define AMS_DELTA_MODEM_PHYS		0x04000000
+#define AMS_DELTA_MODEM_VIRT		0xEB000000
+#define AMS_DELTA_LATCH2_PHYS		0x08000000
+#define AMS_DELTA_LATCH2_VIRT		0xEC000000
+
+#define AMS_DELTA_LATCH1_LED_CAMERA	0x01
+#define AMS_DELTA_LATCH1_LED_ADVERT	0x02
+#define AMS_DELTA_LATCH1_LED_EMAIL	0x04
+#define AMS_DELTA_LATCH1_LED_HANDSFREE	0x08
+#define AMS_DELTA_LATCH1_LED_VOICEMAIL	0x10
+#define AMS_DELTA_LATCH1_LED_VOICE	0x20
+
+#define AMS_DELTA_LATCH2_LCD_VBLEN	0x0001
+#define AMS_DELTA_LATCH2_LCD_NDISP	0x0002
+#define AMS_DELTA_LATCH2_NAND_NCE	0x0004
+#define AMS_DELTA_LATCH2_NAND_NRE	0x0008
+#define AMS_DELTA_LATCH2_NAND_NWP	0x0010
+#define AMS_DELTA_LATCH2_NAND_NWE	0x0020
+#define AMS_DELTA_LATCH2_NAND_ALE	0x0040
+#define AMS_DELTA_LATCH2_NAND_CLE	0x0080
+#define AMD_DELTA_LATCH2_KEYBRD_PWR	0x0100
+#define AMD_DELTA_LATCH2_KEYBRD_DATA	0x0200
+#define AMD_DELTA_LATCH2_SCARD_RSTIN	0x0400
+#define AMD_DELTA_LATCH2_SCARD_CMDVCC	0x0800
+#define AMS_DELTA_LATCH2_MODEM_NRESET	0x1000
+#define AMS_DELTA_LATCH2_MODEM_CODEC	0x2000
+
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA	0
+#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK	1
+#define AMS_DELTA_GPIO_PIN_MODEM_IRQ	2
+#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH	4
+#define AMS_DELTA_GPIO_PIN_SCARD_NOFF	6
+#define AMS_DELTA_GPIO_PIN_SCARD_IO	7
+#define AMS_DELTA_GPIO_PIN_CONFIG	11
+#define AMS_DELTA_GPIO_PIN_NAND_RB	12
+
+#ifndef __ASSEMBLY__
+void ams_delta_latch1_write(u8 mask, u8 value);
+void ams_delta_latch2_write(u16 mask, u16 value);
+#endif
+
+#endif /* CONFIG_MACH_AMS_DELTA */
+
+#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/arch/arm/plat-omap/include/mach/board-apollon.h b/arch/arm/plat-omap/include/mach/board-apollon.h
new file mode 100644
index 000000000000..d6f2a8e963d5
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-apollon.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-apollon.h
+ *
+ * Hardware definitions for Samsung OMAP24XX Apollon board.
+ *
+ * Initial creation by Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_APOLLON_H
+#define __ASM_ARCH_OMAP_APOLLON_H
+
+extern void apollon_mmc_init(void);
+
+/* Placeholder for APOLLON specific defines */
+#define APOLLON_ETHR_GPIO_IRQ		74
+
+#endif /*  __ASM_ARCH_OMAP_APOLLON_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-fsample.h b/arch/arm/plat-omap/include/mach/board-fsample.h
new file mode 100644
index 000000000000..cb3c5ae12776
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-fsample.h
@@ -0,0 +1,51 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-fsample.h
+ *
+ * Board-specific goodies for TI F-Sample.
+ *
+ * Copyright (C) 2006 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FSAMPLE_H
+#define __ASM_ARCH_OMAP_FSAMPLE_H
+
+/* fsample is pretty close to p2-sample */
+#include <mach/board-perseus2.h>
+
+#define fsample_cpld_read(reg) __raw_readb(reg)
+#define fsample_cpld_write(val, reg) __raw_writeb(val, reg)
+
+#define FSAMPLE_CPLD_BASE    0xE8100000
+#define FSAMPLE_CPLD_SIZE    SZ_4K
+#define FSAMPLE_CPLD_START   0x05080000
+
+#define FSAMPLE_CPLD_REG_A   (FSAMPLE_CPLD_BASE + 0x00)
+#define FSAMPLE_CPLD_SWITCH  (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_UART    (FSAMPLE_CPLD_BASE + 0x02)
+#define FSAMPLE_CPLD_REG_B   (FSAMPLE_CPLD_BASE + 0x04)
+#define FSAMPLE_CPLD_VERSION (FSAMPLE_CPLD_BASE + 0x06)
+#define FSAMPLE_CPLD_SET_CLR (FSAMPLE_CPLD_BASE + 0x06)
+
+#define FSAMPLE_CPLD_BIT_BT_RESET         0
+#define FSAMPLE_CPLD_BIT_LCD_RESET        1
+#define FSAMPLE_CPLD_BIT_CAM_PWDN         2
+#define FSAMPLE_CPLD_BIT_CHARGER_ENABLE   3
+#define FSAMPLE_CPLD_BIT_SD_MMC_EN        4
+#define FSAMPLE_CPLD_BIT_aGPS_PWREN       5
+#define FSAMPLE_CPLD_BIT_BACKLIGHT        6
+#define FSAMPLE_CPLD_BIT_aGPS_EN_RESET    7
+#define FSAMPLE_CPLD_BIT_aGPS_SLEEPx_N    8
+#define FSAMPLE_CPLD_BIT_OTG_RESET        9
+
+#define fsample_cpld_set(bit) \
+    fsample_cpld_write((((bit) & 15) << 4) | 0x0f, FSAMPLE_CPLD_SET_CLR)
+
+#define fsample_cpld_clear(bit) \
+    fsample_cpld_write(0xf0 | ((bit) & 15), FSAMPLE_CPLD_SET_CLR)
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/board-h2.h b/arch/arm/plat-omap/include/mach/board-h2.h
new file mode 100644
index 000000000000..2a050e9be65f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-h2.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-h2.h
+ *
+ * Hardware definitions for TI OMAP1610 H2 board.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_H2_H
+#define __ASM_ARCH_OMAP_H2_H
+
+/* Placeholder for H2 specific defines */
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define OMAP1610_ETHR_START		0x04000300
+
+extern void h2_mmc_init(void);
+extern void h2_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /*  __ASM_ARCH_OMAP_H2_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-h3.h b/arch/arm/plat-omap/include/mach/board-h3.h
new file mode 100644
index 000000000000..14909dc7858a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-h3.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-h3.h
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_H3_H
+#define __ASM_ARCH_OMAP_H3_H
+
+/* In OMAP1710 H3 the Ethernet is directly connected to CS1 */
+#define OMAP1710_ETHR_START		0x04000300
+
+extern void h3_mmc_init(void);
+extern void h3_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /*  __ASM_ARCH_OMAP_H3_H */
diff --git a/arch/arm/plat-omap/include/mach/board-h4.h b/arch/arm/plat-omap/include/mach/board-h4.h
new file mode 100644
index 000000000000..1470cd3e519b
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-h4.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-h4.h
+ *
+ * Hardware definitions for TI OMAP1610 H4 board.
+ *
+ * Initial creation by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_H4_H
+#define __ASM_ARCH_OMAP_H4_H
+
+/* Placeholder for H4 specific defines */
+#define OMAP24XX_ETHR_GPIO_IRQ		92
+#endif /*  __ASM_ARCH_OMAP_H4_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-innovator.h b/arch/arm/plat-omap/include/mach/board-innovator.h
new file mode 100644
index 000000000000..5ae3e79b9f9c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-innovator.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-innovator.h
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_INNOVATOR_H
+#define __ASM_ARCH_OMAP_INNOVATOR_H
+
+#if defined (CONFIG_ARCH_OMAP15XX)
+
+#ifndef OMAP_SDRAM_DEVICE
+#define OMAP_SDRAM_DEVICE			D256M_1X16_4B
+#endif
+
+#define OMAP1510P1_IMIF_PRI_VALUE		0x00
+#define OMAP1510P1_EMIFS_PRI_VALUE		0x00
+#define OMAP1510P1_EMIFF_PRI_VALUE		0x00
+
+#ifndef __ASSEMBLY__
+void fpga_write(unsigned char val, int reg);
+unsigned char fpga_read(int reg);
+#endif
+
+#endif /* CONFIG_ARCH_OMAP15XX */
+
+#if defined (CONFIG_ARCH_OMAP16XX)
+
+/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
+#define INNOVATOR1610_ETHR_START	0x04000300
+
+#endif /* CONFIG_ARCH_OMAP1610 */
+#endif /* __ASM_ARCH_OMAP_INNOVATOR_H */
diff --git a/arch/arm/plat-omap/include/mach/board-nokia.h b/arch/arm/plat-omap/include/mach/board-nokia.h
new file mode 100644
index 000000000000..2abbe001af8c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-nokia.h
@@ -0,0 +1,54 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board-nokia.h
+ *
+ *  Information structures for Nokia-specific board config data
+ *
+ *  Copyright (C) 2005	Nokia Corporation
+ */
+
+#ifndef _OMAP_BOARD_NOKIA_H
+#define _OMAP_BOARD_NOKIA_H
+
+#include <linux/types.h>
+
+#define OMAP_TAG_NOKIA_BT	0x4e01
+#define OMAP_TAG_WLAN_CX3110X	0x4e02
+#define OMAP_TAG_CBUS		0x4e03
+#define OMAP_TAG_EM_ASIC_BB5	0x4e04
+
+
+#define BT_CHIP_CSR		1
+#define BT_CHIP_TI		2
+
+#define BT_SYSCLK_12		1
+#define BT_SYSCLK_38_4		2
+
+struct omap_bluetooth_config {
+	u8    chip_type;
+	u8    bt_wakeup_gpio;
+	u8    host_wakeup_gpio;
+	u8    reset_gpio;
+	u8    bt_uart;
+	u8    bd_addr[6];
+	u8    bt_sysclk;
+};
+
+struct omap_wlan_cx3110x_config {
+	u8  chip_type;
+	s16 power_gpio;
+	s16 irq_gpio;
+	s16 spi_cs_gpio;
+};
+
+struct omap_cbus_config {
+	s16 clk_gpio;
+	s16 dat_gpio;
+	s16 sel_gpio;
+};
+
+struct omap_em_asic_bb5_config {
+	s16 retu_irq_gpio;
+	s16 tahvo_irq_gpio;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/board-osk.h b/arch/arm/plat-omap/include/mach/board-osk.h
new file mode 100644
index 000000000000..3850cb1f220a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-osk.h
@@ -0,0 +1,47 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-osk.h
+ *
+ * Hardware definitions for TI OMAP5912 OSK board.
+ *
+ * Written by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_OSK_H
+#define __ASM_ARCH_OMAP_OSK_H
+
+/* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
+#define OMAP_OSK_ETHR_START		0x04800300
+
+/* TPS65010 has four GPIOs.  nPG and LED2 can be treated like GPIOs with
+ * alternate pin configurations for hardware-controlled blinking.
+ */
+#define OSK_TPS_GPIO_BASE		(OMAP_MAX_GPIO_LINES + 16 /* MPUIO */)
+#	define OSK_TPS_GPIO_USB_PWR_EN	(OSK_TPS_GPIO_BASE + 0)
+#	define OSK_TPS_GPIO_LED_D3	(OSK_TPS_GPIO_BASE + 1)
+#	define OSK_TPS_GPIO_LAN_RESET	(OSK_TPS_GPIO_BASE + 2)
+#	define OSK_TPS_GPIO_DSP_PWR_EN	(OSK_TPS_GPIO_BASE + 3)
+#	define OSK_TPS_GPIO_LED_D9	(OSK_TPS_GPIO_BASE + 4)
+#	define OSK_TPS_GPIO_LED_D2	(OSK_TPS_GPIO_BASE + 5)
+
+#endif /*  __ASM_ARCH_OMAP_OSK_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board-palmte.h b/arch/arm/plat-omap/include/mach/board-palmte.h
new file mode 100644
index 000000000000..6906cdebbcfb
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-palmte.h
@@ -0,0 +1,32 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-palmte.h
+ *
+ * Hardware definitions for the Palm Tungsten E device.
+ *
+ * Maintainters :	http://palmtelinux.sf.net
+ *			palmtelinux-developpers@lists.sf.net
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_BOARD_PALMTE_H
+#define __OMAP_BOARD_PALMTE_H
+
+#define PALMTE_USBDETECT_GPIO	0
+#define PALMTE_USB_OR_DC_GPIO	1
+#define PALMTE_TSC_GPIO		4
+#define PALMTE_PINTDAV_GPIO	6
+#define PALMTE_MMC_WP_GPIO	8
+#define PALMTE_MMC_POWER_GPIO	9
+#define PALMTE_HDQ_GPIO		11
+#define PALMTE_HEADPHONES_GPIO	14
+#define PALMTE_SPEAKER_GPIO	15
+#define PALMTE_DC_GPIO		OMAP_MPUIO(2)
+#define PALMTE_MMC_SWITCH_GPIO	OMAP_MPUIO(4)
+#define PALMTE_MMC1_GPIO	OMAP_MPUIO(6)
+#define PALMTE_MMC2_GPIO	OMAP_MPUIO(7)
+#define PALMTE_MMC3_GPIO	OMAP_MPUIO(11)
+
+#endif	/* __OMAP_BOARD_PALMTE_H */
diff --git a/arch/arm/plat-omap/include/mach/board-palmtt.h b/arch/arm/plat-omap/include/mach/board-palmtt.h
new file mode 100644
index 000000000000..e79f382b5931
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-palmtt.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-palmte.h
+ *
+ * Hardware definitions for the Palm Tungsten|T device.
+ *
+ * Maintainters :	Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_BOARD_PALMTT_H
+#define __OMAP_BOARD_PALMTT_H
+
+#define PALMTT_USBDETECT_GPIO	0
+#define PALMTT_CABLE_GPIO	1
+#define PALMTT_LED_GPIO		3
+#define PALMTT_PENIRQ_GPIO	6
+#define PALMTT_MMC_WP_GPIO	8
+#define PALMTT_HDQ_GPIO		11
+
+#endif	/* __OMAP_BOARD_PALMTT_H */
diff --git a/arch/arm/plat-omap/include/mach/board-palmz71.h b/arch/arm/plat-omap/include/mach/board-palmz71.h
new file mode 100644
index 000000000000..b1d7d579b313
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-palmz71.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-palmz71.h
+ *
+ * Hardware definitions for the Palm Zire71 device.
+ *
+ * Maintainters :	Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_BOARD_PALMZ71_H
+#define __OMAP_BOARD_PALMZ71_H
+
+#define PALMZ71_USBDETECT_GPIO	0
+#define PALMZ71_PENIRQ_GPIO	6
+#define PALMZ71_MMC_WP_GPIO	8
+#define PALMZ71_HDQ_GPIO 	11
+
+#define PALMZ71_HOTSYNC_GPIO	OMAP_MPUIO(1)
+#define PALMZ71_CABLE_GPIO	OMAP_MPUIO(2)
+#define PALMZ71_SLIDER_GPIO	OMAP_MPUIO(3)
+#define PALMZ71_MMC_IN_GPIO	OMAP_MPUIO(4)
+
+#endif	/* __OMAP_BOARD_PALMZ71_H */
diff --git a/arch/arm/plat-omap/include/mach/board-perseus2.h b/arch/arm/plat-omap/include/mach/board-perseus2.h
new file mode 100644
index 000000000000..c06c3d717d57
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-perseus2.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board-perseus2.h
+ *
+ *  Copyright 2003 by Texas Instruments Incorporated
+ *    OMAP730 / Perseus2 support by Jean Pihet
+ *
+ * Copyright (C) 2001 RidgeRun, Inc. (http://www.ridgerun.com)
+ * Author: RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_PERSEUS2_H
+#define __ASM_ARCH_OMAP_PERSEUS2_H
+
+#include <mach/fpga.h>
+
+#ifndef OMAP_SDRAM_DEVICE
+#define OMAP_SDRAM_DEVICE		D256M_1X16_4B
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/board-sx1.h b/arch/arm/plat-omap/include/mach/board-sx1.h
new file mode 100644
index 000000000000..355adbdaae33
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-sx1.h
@@ -0,0 +1,52 @@
+/*
+ * Siemens SX1 board definitions
+ *
+ * Copyright: Vovan888 at gmail com
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H
+#define __ASM_ARCH_SX1_I2C_CHIPS_H
+
+#define SOFIA_MAX_LIGHT_VAL	0x2B
+
+#define SOFIA_I2C_ADDR		0x32
+/* Sofia reg 3 bits masks */
+#define SOFIA_POWER1_REG	0x03
+
+#define	SOFIA_USB_POWER		0x01
+#define	SOFIA_MMC_POWER		0x04
+#define	SOFIA_BLUETOOTH_POWER	0x08
+#define	SOFIA_MMILIGHT_POWER	0x20
+
+#define SOFIA_POWER2_REG	0x04
+#define SOFIA_BACKLIGHT_REG	0x06
+#define SOFIA_KEYLIGHT_REG	0x07
+#define SOFIA_DIMMING_REG	0x09
+
+
+/* Function Prototypes for SX1 devices control on I2C bus */
+
+int sx1_setbacklight(u8 backlight);
+int sx1_getbacklight(u8 *backlight);
+int sx1_setkeylight(u8 keylight);
+int sx1_getkeylight(u8 *keylight);
+
+int sx1_setmmipower(u8 onoff);
+int sx1_setusbpower(u8 onoff);
+int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value);
+int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value);
+
+/* MMC prototypes */
+
+extern void sx1_mmc_init(void);
+extern void sx1_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */
diff --git a/arch/arm/plat-omap/include/mach/board-voiceblue.h b/arch/arm/plat-omap/include/mach/board-voiceblue.h
new file mode 100644
index 000000000000..ed6d346ee123
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board-voiceblue.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * Hardware definitions for OMAP5910 based VoiceBlue board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VOICEBLUE_H
+#define __ASM_ARCH_VOICEBLUE_H
+
+extern void voiceblue_wdt_enable(void);
+extern void voiceblue_wdt_disable(void);
+extern void voiceblue_wdt_ping(void);
+extern void voiceblue_reset(void);
+
+#endif /*  __ASM_ARCH_VOICEBLUE_H */
+
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/mach/board.h
new file mode 100644
index 000000000000..54445642f35d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/board.h
@@ -0,0 +1,186 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board.h
+ *
+ *  Information structures for board-specific data
+ *
+ *  Copyright (C) 2004	Nokia Corporation
+ *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+#ifndef _OMAP_BOARD_H
+#define _OMAP_BOARD_H
+
+#include <linux/types.h>
+
+#include <mach/gpio-switch.h>
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK		0x4f01
+#define OMAP_TAG_MMC		0x4f02
+#define OMAP_TAG_SERIAL_CONSOLE 0x4f03
+#define OMAP_TAG_USB		0x4f04
+#define OMAP_TAG_LCD		0x4f05
+#define OMAP_TAG_GPIO_SWITCH	0x4f06
+#define OMAP_TAG_UART		0x4f07
+#define OMAP_TAG_FBMEM		0x4f08
+#define OMAP_TAG_STI_CONSOLE	0x4f09
+#define OMAP_TAG_CAMERA_SENSOR	0x4f0a
+
+#define OMAP_TAG_BOOT_REASON    0x4f80
+#define OMAP_TAG_FLASH_PART	0x4f81
+#define OMAP_TAG_VERSION_STR	0x4f82
+
+struct omap_clock_config {
+	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+	u8 system_clock_type;
+};
+
+struct omap_mmc_conf {
+	unsigned enabled:1;
+	/* nomux means "standard" muxing is wrong on this board, and that
+	 * board-specific code handled it before common init logic.
+	 */
+	unsigned nomux:1;
+	/* switch pin can be for card detect (default) or card cover */
+	unsigned cover:1;
+	/* 4 wire signaling is optional, and is only used for SD/SDIO */
+	unsigned wire4:1;
+	s16 power_pin;
+	s16 switch_pin;
+	s16 wp_pin;
+};
+
+struct omap_mmc_config {
+	struct omap_mmc_conf mmc[2];
+};
+
+struct omap_serial_console_config {
+	u8 console_uart;
+	u32 console_speed;
+};
+
+struct omap_sti_console_config {
+	unsigned enable:1;
+	u8 channel;
+};
+
+struct omap_camera_sensor_config {
+	u16 reset_gpio;
+	int (*power_on)(void * data);
+	int (*power_off)(void * data);
+};
+
+struct omap_usb_config {
+	/* Configure drivers according to the connectors on your board:
+	 *  - "A" connector (rectagular)
+	 *	... for host/OHCI use, set "register_host".
+	 *  - "B" connector (squarish) or "Mini-B"
+	 *	... for device/gadget use, set "register_dev".
+	 *  - "Mini-AB" connector (very similar to Mini-B)
+	 *	... for OTG use as device OR host, initialize "otg"
+	 */
+	unsigned	register_host:1;
+	unsigned	register_dev:1;
+	u8		otg;	/* port number, 1-based:  usb1 == 2 */
+
+	u8		hmc_mode;
+
+	/* implicitly true if otg:  host supports remote wakeup? */
+	u8		rwc;
+
+	/* signaling pins used to talk to transceiver on usbN:
+	 *  0 == usbN unused
+	 *  2 == usb0-only, using internal transceiver
+	 *  3 == 3 wire bidirectional
+	 *  4 == 4 wire bidirectional
+	 *  6 == 6 wire unidirectional (or TLL)
+	 */
+	u8		pins[3];
+};
+
+struct omap_lcd_config {
+	char panel_name[16];
+	char ctrl_name[16];
+	s16  nreset_gpio;
+	u8   data_lines;
+};
+
+struct device;
+struct fb_info;
+struct omap_backlight_config {
+	int default_intensity;
+	int (*set_power)(struct device *dev, int state);
+	int (*check_fb)(struct fb_info *fb);
+};
+
+struct omap_fbmem_config {
+	u32 start;
+	u32 size;
+};
+
+struct omap_pwm_led_platform_data {
+	const char *name;
+	int intensity_timer;
+	int blink_timer;
+	void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
+};
+
+/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
+struct omap_gpio_switch_config {
+	char name[12];
+	u16 gpio;
+	int flags:4;
+	int type:4;
+	int key_code:24; /* Linux key code */
+};
+
+struct omap_uart_config {
+	/* Bit field of UARTs present; bit 0 --> UART1 */
+	unsigned int enabled_uarts;
+};
+
+
+struct omap_flash_part_config {
+	char part_table[0];
+};
+
+struct omap_boot_reason_config {
+	char reason_str[12];
+};
+
+struct omap_version_config {
+	char component[12];
+	char version[12];
+};
+
+
+#include <mach/board-nokia.h>
+
+struct omap_board_config_entry {
+	u16 tag;
+	u16 len;
+	u8  data[0];
+};
+
+struct omap_board_config_kernel {
+	u16 tag;
+	const void *data;
+};
+
+extern const void *__omap_get_config(u16 tag, size_t len, int nr);
+
+#define omap_get_config(tag, type) \
+	((const type *) __omap_get_config((tag), sizeof(type), 0))
+#define omap_get_nr_config(tag, type, nr) \
+	((const type *) __omap_get_config((tag), sizeof(type), (nr)))
+
+extern const void *omap_get_var_config(u16 tag, size_t *len);
+
+extern struct omap_board_config_kernel *omap_board_config;
+extern int omap_board_config_size;
+
+
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/mach/clock.h
new file mode 100644
index 000000000000..92f7c7238fcd
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/clock.h
@@ -0,0 +1,162 @@
+/*
+ *  arch/arm/plat-omap/include/mach/clock.h
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_CLOCK_H
+#define __ARCH_ARM_OMAP_CLOCK_H
+
+struct module;
+struct clk;
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
+struct clksel_rate {
+	u8			div;
+	u32			val;
+	u8			flags;
+};
+
+struct clksel {
+	struct clk		 *parent;
+	const struct clksel_rate *rates;
+};
+
+struct dpll_data {
+	void __iomem		*mult_div1_reg;
+	u32			mult_mask;
+	u32			div1_mask;
+	u16			last_rounded_m;
+	u8			last_rounded_n;
+	unsigned long		last_rounded_rate;
+	unsigned int		rate_tolerance;
+	u16			max_multiplier;
+	u8			max_divider;
+	u32			max_tolerance;
+#  if defined(CONFIG_ARCH_OMAP3)
+	u8			modes;
+	void __iomem		*control_reg;
+	u32			enable_mask;
+	u8			auto_recal_bit;
+	u8			recal_en_bit;
+	u8			recal_st_bit;
+	void __iomem		*autoidle_reg;
+	u32			autoidle_mask;
+	void __iomem		*idlest_reg;
+	u8			idlest_bit;
+#  endif
+};
+
+#endif
+
+struct clk {
+	struct list_head	node;
+	struct module		*owner;
+	const char		*name;
+	int			id;
+	struct clk		*parent;
+	unsigned long		rate;
+	__u32			flags;
+	void __iomem		*enable_reg;
+	__u8			enable_bit;
+	__s8			usecount;
+	void			(*recalc)(struct clk *);
+	int			(*set_rate)(struct clk *, unsigned long);
+	long			(*round_rate)(struct clk *, unsigned long);
+	void			(*init)(struct clk *);
+	int			(*enable)(struct clk *);
+	void			(*disable)(struct clk *);
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+	u8			fixed_div;
+	void __iomem		*clksel_reg;
+	u32			clksel_mask;
+	const struct clksel	*clksel;
+	struct dpll_data	*dpll_data;
+#else
+	__u8			rate_offset;
+	__u8			src_offset;
+#endif
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+	struct dentry		*dent;	/* For visible tree hierarchy */
+#endif
+};
+
+struct cpufreq_frequency_table;
+
+struct clk_functions {
+	int		(*clk_enable)(struct clk *clk);
+	void		(*clk_disable)(struct clk *clk);
+	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);
+	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);
+	struct clk *	(*clk_get_parent)(struct clk *clk);
+	void		(*clk_allow_idle)(struct clk *clk);
+	void		(*clk_deny_idle)(struct clk *clk);
+	void		(*clk_disable_unused)(struct clk *clk);
+#ifdef CONFIG_CPU_FREQ
+	void		(*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+#endif
+};
+
+extern unsigned int mpurate;
+
+extern int clk_init(struct clk_functions * custom_clocks);
+extern int clk_register(struct clk *clk);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern void followparent_recalc(struct clk * clk);
+extern void clk_allow_idle(struct clk *clk);
+extern void clk_deny_idle(struct clk *clk);
+extern int clk_get_usecount(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+
+/* Clock flags */
+#define RATE_CKCTL		(1 << 0)	/* Main fixed ratio clocks */
+#define RATE_FIXED		(1 << 1)	/* Fixed clock rate */
+#define RATE_PROPAGATES		(1 << 2)	/* Program children too */
+#define VIRTUAL_CLOCK		(1 << 3)	/* Composite clock from table */
+#define ALWAYS_ENABLED		(1 << 4)	/* Clock cannot be disabled */
+#define ENABLE_REG_32BIT	(1 << 5)	/* Use 32-bit access */
+#define VIRTUAL_IO_ADDRESS	(1 << 6)	/* Clock in virtual address */
+#define CLOCK_IDLE_CONTROL	(1 << 7)
+#define CLOCK_NO_IDLE_PARENT	(1 << 8)
+#define DELAYED_APP		(1 << 9)	/* Delay application of clock */
+#define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
+#define ENABLE_ON_INIT		(1 << 11)	/* Enable upon framework init */
+#define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
+/* bits 13-20 are currently free */
+#define CLOCK_IN_OMAP310	(1 << 21)
+#define CLOCK_IN_OMAP730	(1 << 22)
+#define CLOCK_IN_OMAP1510	(1 << 23)
+#define CLOCK_IN_OMAP16XX	(1 << 24)
+#define CLOCK_IN_OMAP242X	(1 << 25)
+#define CLOCK_IN_OMAP243X	(1 << 26)
+#define CLOCK_IN_OMAP343X	(1 << 27)	/* clocks common to all 343X */
+#define PARENT_CONTROLS_CLOCK	(1 << 28)
+#define CLOCK_IN_OMAP3430ES1	(1 << 29)	/* 3430ES1 clocks only */
+#define CLOCK_IN_OMAP3430ES2	(1 << 30)	/* 3430ES2 clocks only */
+
+/* Clksel_rate flags */
+#define DEFAULT_RATE		(1 << 0)
+#define RATE_IN_242X		(1 << 1)
+#define RATE_IN_243X		(1 << 2)
+#define RATE_IN_343X		(1 << 3)	/* rates common to all 343X */
+#define RATE_IN_3430ES2		(1 << 4)	/* 3430ES2 rates only */
+
+#define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
+
+
+/* CM_CLKSEL2_PLL.CORE_CLK_SRC options (24XX) */
+#define CORE_CLK_SRC_32K		0
+#define CORE_CLK_SRC_DPLL		1
+#define CORE_CLK_SRC_DPLL_X2		2
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/mach/common.h
new file mode 100644
index 000000000000..06093112b665
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/common.h
@@ -0,0 +1,69 @@
+/*
+ * arch/arm/plat-omap/include/mach/common.h
+ *
+ * Header for code common to all OMAP machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
+#define __ARCH_ARM_MACH_OMAP_COMMON_H
+
+#include <linux/i2c.h>
+
+struct sys_timer;
+
+extern void omap_map_common_io(void);
+extern struct sys_timer omap_timer;
+extern void omap_serial_init(void);
+#ifdef CONFIG_I2C_OMAP
+extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len);
+#else
+static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len)
+{
+	return 0;
+}
+#endif
+
+/* IO bases for various OMAP processors */
+struct omap_globals {
+	void __iomem	*tap;		/* Control module ID code */
+	void __iomem	*sdrc;		/* SDRAM Controller */
+	void __iomem	*sms;		/* SDRAM Memory Scheduler */
+	void __iomem	*ctrl;		/* System Control Module */
+	void __iomem	*prm;		/* Power and Reset Management */
+	void __iomem	*cm;		/* Clock Management */
+};
+
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_343x(void);
+
+/* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_memory(struct omap_globals *);
+void omap2_set_globals_control(struct omap_globals *);
+void omap2_set_globals_prcm(struct omap_globals *);
+
+#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/mach/control.h
new file mode 100644
index 000000000000..e3fd62d9a995
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/control.h
@@ -0,0 +1,189 @@
+#ifndef __ASM_ARCH_CONTROL_H
+#define __ASM_ARCH_CONTROL_H
+
+/*
+ * arch/arm/plat-omap/include/mach/control.h
+ *
+ * OMAP2/3 System Control Module definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation.
+ */
+
+#include <mach/io.h>
+
+#define OMAP242X_CTRL_REGADDR(reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)					\
+	(void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+
+/*
+ * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for
+ * OMAP24XX and OMAP34XX.
+ */
+
+/* Control submodule offsets */
+
+#define OMAP2_CONTROL_INTERFACE		0x000
+#define OMAP2_CONTROL_PADCONFS		0x030
+#define OMAP2_CONTROL_GENERAL		0x270
+#define OMAP343X_CONTROL_MEM_WKUP	0x600
+#define OMAP343X_CONTROL_PADCONFS_WKUP	0xa00
+#define OMAP343X_CONTROL_GENERAL_WKUP	0xa60
+
+/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */
+
+#define OMAP2_CONTROL_SYSCONFIG		(OMAP2_CONTROL_INTERFACE + 0x10)
+
+/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */
+#define OMAP2_CONTROL_DEVCONF0		(OMAP2_CONTROL_GENERAL + 0x0004)
+#define OMAP2_CONTROL_MSUSPENDMUX_0	(OMAP2_CONTROL_GENERAL + 0x0020)
+#define OMAP2_CONTROL_MSUSPENDMUX_1	(OMAP2_CONTROL_GENERAL + 0x0024)
+#define OMAP2_CONTROL_MSUSPENDMUX_2	(OMAP2_CONTROL_GENERAL + 0x0028)
+#define OMAP2_CONTROL_MSUSPENDMUX_3	(OMAP2_CONTROL_GENERAL + 0x002c)
+#define OMAP2_CONTROL_MSUSPENDMUX_4	(OMAP2_CONTROL_GENERAL + 0x0030)
+#define OMAP2_CONTROL_MSUSPENDMUX_5	(OMAP2_CONTROL_GENERAL + 0x0034)
+#define OMAP2_CONTROL_SEC_CTRL		(OMAP2_CONTROL_GENERAL + 0x0040)
+#define OMAP2_CONTROL_RPUB_KEY_H_0	(OMAP2_CONTROL_GENERAL + 0x0090)
+#define OMAP2_CONTROL_RPUB_KEY_H_1	(OMAP2_CONTROL_GENERAL + 0x0094)
+#define OMAP2_CONTROL_RPUB_KEY_H_2	(OMAP2_CONTROL_GENERAL + 0x0098)
+#define OMAP2_CONTROL_RPUB_KEY_H_3	(OMAP2_CONTROL_GENERAL + 0x009c)
+
+/* 242x-only CONTROL_GENERAL register offsets */
+#define OMAP242X_CONTROL_DEVCONF	OMAP2_CONTROL_DEVCONF0 /* match TRM */
+#define OMAP242X_CONTROL_OCM_RAM_PERM	(OMAP2_CONTROL_GENERAL + 0x0068)
+
+/* 243x-only CONTROL_GENERAL register offsets */
+/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */
+#define OMAP243X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP243X_CONTROL_CSIRXFE	(OMAP2_CONTROL_GENERAL + 0x007c)
+#define OMAP243X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP243X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
+#define OMAP243X_CONTROL_IVA2_GEMCFG	(OMAP2_CONTROL_GENERAL + 0x0198)
+
+/* 24xx-only CONTROL_GENERAL register offsets */
+#define OMAP24XX_CONTROL_DEBOBS		(OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP24XX_CONTROL_EMU_SUPPORT	(OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP24XX_CONTROL_SEC_TEST	(OMAP2_CONTROL_GENERAL + 0x0044)
+#define OMAP24XX_CONTROL_PSA_CTRL	(OMAP2_CONTROL_GENERAL + 0x0048)
+#define OMAP24XX_CONTROL_PSA_CMD	(OMAP2_CONTROL_GENERAL + 0x004c)
+#define OMAP24XX_CONTROL_PSA_VALUE	(OMAP2_CONTROL_GENERAL + 0x0050)
+#define OMAP24XX_CONTROL_SEC_EMU	(OMAP2_CONTROL_GENERAL + 0x0060)
+#define OMAP24XX_CONTROL_SEC_TAP	(OMAP2_CONTROL_GENERAL + 0x0064)
+#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD	(OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD	(OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD	(OMAP2_CONTROL_GENERAL + 0x0074)
+#define OMAP24XX_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP24XX_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP24XX_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0088)
+#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x008c)
+#define OMAP24XX_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP24XX_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00a4)
+#define OMAP24XX_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP24XX_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP24XX_CONTROL_CUST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP24XX_CONTROL_CUST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP24XX_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c0)
+#define OMAP24XX_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00c4)
+#define OMAP24XX_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP24XX_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP24XX_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP24XX_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP24XX_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP24XX_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP24XX_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP24XX_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00e4)
+
+/* 34xx-only CONTROL_GENERAL register offsets */
+#define OMAP343X_CONTROL_PADCONF_OFF	(OMAP2_CONTROL_GENERAL + 0x0000)
+#define OMAP343X_CONTROL_MEM_DFTRW0	(OMAP2_CONTROL_GENERAL + 0x0008)
+#define OMAP343X_CONTROL_MEM_DFTRW1	(OMAP2_CONTROL_GENERAL + 0x000c)
+#define OMAP343X_CONTROL_DEVCONF1	(OMAP2_CONTROL_GENERAL + 0x0068)
+#define OMAP343X_CONTROL_CSIRXFE		(OMAP2_CONTROL_GENERAL + 0x006c)
+#define OMAP343X_CONTROL_SEC_STATUS		(OMAP2_CONTROL_GENERAL + 0x0070)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS		(OMAP2_CONTROL_GENERAL + 0x0074)
+#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG	(OMAP2_CONTROL_GENERAL + 0x0078)
+#define OMAP343X_CONTROL_STATUS			(OMAP2_CONTROL_GENERAL + 0x0080)
+#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS	(OMAP2_CONTROL_GENERAL + 0x0084)
+#define OMAP343X_CONTROL_RPUB_KEY_H_4	(OMAP2_CONTROL_GENERAL + 0x00a0)
+#define OMAP343X_CONTROL_RAND_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00a8)
+#define OMAP343X_CONTROL_RAND_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00ac)
+#define OMAP343X_CONTROL_RAND_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00b0)
+#define OMAP343X_CONTROL_RAND_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00b4)
+#define OMAP343X_CONTROL_TEST_KEY_0	(OMAP2_CONTROL_GENERAL + 0x00c8)
+#define OMAP343X_CONTROL_TEST_KEY_1	(OMAP2_CONTROL_GENERAL + 0x00cc)
+#define OMAP343X_CONTROL_TEST_KEY_2	(OMAP2_CONTROL_GENERAL + 0x00d0)
+#define OMAP343X_CONTROL_TEST_KEY_3	(OMAP2_CONTROL_GENERAL + 0x00d4)
+#define OMAP343X_CONTROL_TEST_KEY_4	(OMAP2_CONTROL_GENERAL + 0x00d8)
+#define OMAP343X_CONTROL_TEST_KEY_5	(OMAP2_CONTROL_GENERAL + 0x00dc)
+#define OMAP343X_CONTROL_TEST_KEY_6	(OMAP2_CONTROL_GENERAL + 0x00e0)
+#define OMAP343X_CONTROL_TEST_KEY_7	(OMAP2_CONTROL_GENERAL + 0x00e4)
+#define OMAP343X_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e8)
+#define OMAP343X_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00ec)
+#define OMAP343X_CONTROL_TEST_KEY_10	(OMAP2_CONTROL_GENERAL + 0x00f0)
+#define OMAP343X_CONTROL_TEST_KEY_11	(OMAP2_CONTROL_GENERAL + 0x00f4)
+#define OMAP343X_CONTROL_TEST_KEY_12	(OMAP2_CONTROL_GENERAL + 0x00f8)
+#define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
+#define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
+
+/*
+ * REVISIT: This list of registers is not comprehensive - there are more
+ * that should be added.
+ */
+
+/*
+ * Control module register bit defines - these should eventually go into
+ * their own regbits file.  Some of these will be complicated, depending
+ * on the device type (general-purpose, emulator, test, secure, bad, other)
+ * and the security mode (secure, non-secure, don't care)
+ */
+/* CONTROL_DEVCONF0 bits */
+#define OMAP24XX_USBSTANDBYCTRL		(1 << 15)
+#define OMAP2_MCBSP2_CLKS_MASK		(1 << 6)
+#define OMAP2_MCBSP1_CLKS_MASK		(1 << 2)
+
+/* CONTROL_DEVCONF1 bits */
+#define OMAP2_MCBSP5_CLKS_MASK		(1 << 4) /* > 242x */
+#define OMAP2_MCBSP4_CLKS_MASK		(1 << 2) /* > 242x */
+#define OMAP2_MCBSP3_CLKS_MASK		(1 << 0) /* > 242x */
+
+/* CONTROL_STATUS bits */
+#define OMAP2_DEVICETYPE_MASK		(0x7 << 8)
+#define OMAP2_SYSBOOT_5_MASK		(1 << 5)
+#define OMAP2_SYSBOOT_4_MASK		(1 << 4)
+#define OMAP2_SYSBOOT_3_MASK		(1 << 3)
+#define OMAP2_SYSBOOT_2_MASK		(1 << 2)
+#define OMAP2_SYSBOOT_1_MASK		(1 << 1)
+#define OMAP2_SYSBOOT_0_MASK		(1 << 0)
+
+#ifndef __ASSEMBLY__
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+extern void __iomem *omap_ctrl_base_get(void);
+extern u8 omap_ctrl_readb(u16 offset);
+extern u16 omap_ctrl_readw(u16 offset);
+extern u32 omap_ctrl_readl(u16 offset);
+extern void omap_ctrl_writeb(u8 val, u16 offset);
+extern void omap_ctrl_writew(u16 val, u16 offset);
+extern void omap_ctrl_writel(u32 val, u16 offset);
+#else
+#define omap_ctrl_base_get()		0
+#define omap_ctrl_readb(x)		0
+#define omap_ctrl_readw(x)		0
+#define omap_ctrl_readl(x)		0
+#define omap_ctrl_writeb(x, y)		WARN_ON(1)
+#define omap_ctrl_writew(x, y)		WARN_ON(1)
+#define omap_ctrl_writel(x, y)		WARN_ON(1)
+#endif
+#endif	/* __ASSEMBLY__ */
+
+#endif /* __ASM_ARCH_CONTROL_H */
+
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/mach/cpu.h
new file mode 100644
index 000000000000..05aee0eda34f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/cpu.h
@@ -0,0 +1,402 @@
+/*
+ * arch/arm/plat-omap/include/mach/cpu.h
+ *
+ * OMAP cpu type detection
+ *
+ * Copyright (C) 2004, 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren <tony.lindgren@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_CPU_H
+#define __ASM_ARCH_OMAP_CPU_H
+
+struct omap_chip_id {
+	u8 oc;
+};
+
+#define OMAP_CHIP_INIT(x)	{ .oc = x }
+
+extern unsigned int system_rev;
+
+#define omap2_cpu_rev()		((system_rev >> 12) & 0x0f)
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap16xx
+# endif
+#endif
+#if (defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX))
+# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
+#  error "OMAP1 and OMAP2 can't be selected at the same time"
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2420
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2430
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3430
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap3430
+# endif
+#endif
+
+/*
+ * Macros to group OMAP into cpu classes.
+ * These can be used in most places.
+ * cpu_is_omap7xx():	True for OMAP730
+ * cpu_is_omap15xx():	True for OMAP1510, OMAP5910 and OMAP310
+ * cpu_is_omap16xx():	True for OMAP1610, OMAP5912 and OMAP1710
+ * cpu_is_omap24xx():	True for OMAP2420, OMAP2422, OMAP2423, OMAP2430
+ * cpu_is_omap242x():	True for OMAP2420, OMAP2422, OMAP2423
+ * cpu_is_omap243x():	True for OMAP2430
+ * cpu_is_omap343x():	True for OMAP3430
+ */
+#define GET_OMAP_CLASS	((system_rev >> 24) & 0xff)
+
+#define IS_OMAP_CLASS(class, id)			\
+static inline int is_omap ##class (void)		\
+{							\
+	return (GET_OMAP_CLASS == (id)) ? 1 : 0;	\
+}
+
+#define GET_OMAP_SUBCLASS	((system_rev >> 20) & 0x0fff)
+
+#define IS_OMAP_SUBCLASS(subclass, id)			\
+static inline int is_omap ##subclass (void)		\
+{							\
+	return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0;	\
+}
+
+IS_OMAP_CLASS(7xx, 0x07)
+IS_OMAP_CLASS(15xx, 0x15)
+IS_OMAP_CLASS(16xx, 0x16)
+IS_OMAP_CLASS(24xx, 0x24)
+IS_OMAP_CLASS(34xx, 0x34)
+
+IS_OMAP_SUBCLASS(242x, 0x242)
+IS_OMAP_SUBCLASS(243x, 0x243)
+IS_OMAP_SUBCLASS(343x, 0x343)
+
+#define cpu_is_omap7xx()		0
+#define cpu_is_omap15xx()		0
+#define cpu_is_omap16xx()		0
+#define cpu_is_omap24xx()		0
+#define cpu_is_omap242x()		0
+#define cpu_is_omap243x()		0
+#define cpu_is_omap34xx()		0
+#define cpu_is_omap343x()		0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		is_omap7xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		is_omap15xx()
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		is_omap16xx()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap7xx
+#  define cpu_is_omap7xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP15XX)
+#  undef  cpu_is_omap15xx
+#  define cpu_is_omap15xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP16XX)
+#  undef  cpu_is_omap16xx
+#  define cpu_is_omap16xx()		1
+# endif
+#endif
+
+#if defined(MULTI_OMAP2)
+# if defined(CONFIG_ARCH_OMAP24XX)
+#  undef  cpu_is_omap24xx
+#  undef  cpu_is_omap242x
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap24xx()		is_omap24xx()
+#  define cpu_is_omap242x()		is_omap242x()
+#  define cpu_is_omap243x()		is_omap243x()
+# endif
+# if defined(CONFIG_ARCH_OMAP34XX)
+#  undef  cpu_is_omap34xx
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap34xx()		is_omap34xx()
+#  define cpu_is_omap343x()		is_omap343x()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP24XX)
+#  undef  cpu_is_omap24xx
+#  define cpu_is_omap24xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP2420)
+#  undef  cpu_is_omap242x
+#  define cpu_is_omap242x()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP2430)
+#  undef  cpu_is_omap243x
+#  define cpu_is_omap243x()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP34XX)
+#  undef  cpu_is_omap34xx
+#  define cpu_is_omap34xx()		1
+# endif
+# if defined(CONFIG_ARCH_OMAP3430)
+#  undef  cpu_is_omap343x
+#  define cpu_is_omap343x()		1
+# endif
+#endif
+
+/*
+ * Macros to detect individual cpu types.
+ * These are only rarely needed.
+ * cpu_is_omap330():	True for OMAP330
+ * cpu_is_omap730():	True for OMAP730
+ * cpu_is_omap1510():	True for OMAP1510
+ * cpu_is_omap1610():	True for OMAP1610
+ * cpu_is_omap1611():	True for OMAP1611
+ * cpu_is_omap5912():	True for OMAP5912
+ * cpu_is_omap1621():	True for OMAP1621
+ * cpu_is_omap1710():	True for OMAP1710
+ * cpu_is_omap2420():	True for OMAP2420
+ * cpu_is_omap2422():	True for OMAP2422
+ * cpu_is_omap2423():	True for OMAP2423
+ * cpu_is_omap2430():	True for OMAP2430
+ * cpu_is_omap3430():	True for OMAP3430
+ */
+#define GET_OMAP_TYPE	((system_rev >> 16) & 0xffff)
+
+#define IS_OMAP_TYPE(type, id)				\
+static inline int is_omap ##type (void)			\
+{							\
+	return (GET_OMAP_TYPE == (id)) ? 1 : 0;		\
+}
+
+IS_OMAP_TYPE(310, 0x0310)
+IS_OMAP_TYPE(730, 0x0730)
+IS_OMAP_TYPE(1510, 0x1510)
+IS_OMAP_TYPE(1610, 0x1610)
+IS_OMAP_TYPE(1611, 0x1611)
+IS_OMAP_TYPE(5912, 0x1611)
+IS_OMAP_TYPE(1621, 0x1621)
+IS_OMAP_TYPE(1710, 0x1710)
+IS_OMAP_TYPE(2420, 0x2420)
+IS_OMAP_TYPE(2422, 0x2422)
+IS_OMAP_TYPE(2423, 0x2423)
+IS_OMAP_TYPE(2430, 0x2430)
+IS_OMAP_TYPE(3430, 0x3430)
+
+#define cpu_is_omap310()		0
+#define cpu_is_omap730()		0
+#define cpu_is_omap1510()		0
+#define cpu_is_omap1610()		0
+#define cpu_is_omap5912()		0
+#define cpu_is_omap1611()		0
+#define cpu_is_omap1621()		0
+#define cpu_is_omap1710()		0
+#define cpu_is_omap2420()		0
+#define cpu_is_omap2422()		0
+#define cpu_is_omap2423()		0
+#define cpu_is_omap2430()		0
+#define cpu_is_omap3430()		0
+
+#if defined(MULTI_OMAP1)
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap730
+#  define cpu_is_omap730()		is_omap730()
+# endif
+#else
+# if defined(CONFIG_ARCH_OMAP730)
+#  undef  cpu_is_omap730
+#  define cpu_is_omap730()		1
+# endif
+#endif
+
+/*
+ * Whether we have MULTI_OMAP1 or not, we still need to distinguish
+ * between 330 vs. 1510 and 1611B/5912 vs. 1710.
+ */
+#if defined(CONFIG_ARCH_OMAP15XX)
+# undef  cpu_is_omap310
+# undef  cpu_is_omap1510
+# define cpu_is_omap310()		is_omap310()
+# define cpu_is_omap1510()		is_omap1510()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP16XX)
+# undef  cpu_is_omap1610
+# undef  cpu_is_omap1611
+# undef  cpu_is_omap5912
+# undef  cpu_is_omap1621
+# undef  cpu_is_omap1710
+# define cpu_is_omap1610()		is_omap1610()
+# define cpu_is_omap1611()		is_omap1611()
+# define cpu_is_omap5912()		is_omap5912()
+# define cpu_is_omap1621()		is_omap1621()
+# define cpu_is_omap1710()		is_omap1710()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP24XX)
+# undef  cpu_is_omap2420
+# undef  cpu_is_omap2422
+# undef  cpu_is_omap2423
+# undef  cpu_is_omap2430
+# define cpu_is_omap2420()		is_omap2420()
+# define cpu_is_omap2422()		is_omap2422()
+# define cpu_is_omap2423()		is_omap2423()
+# define cpu_is_omap2430()		is_omap2430()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP34XX)
+# undef cpu_is_omap3430
+# define cpu_is_omap3430()		is_omap3430()
+#endif
+
+/* Macros to detect if we have OMAP1 or OMAP2 */
+#define cpu_class_is_omap1()	(cpu_is_omap730() || cpu_is_omap15xx() || \
+				cpu_is_omap16xx())
+#define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx())
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+/*
+ * Macros to detect silicon revision of OMAP2/3 processors.
+ * is_sil_rev_greater_than:	true if passed cpu type & its rev is greater.
+ * is_sil_rev_lesser_than:	true if passed cpu type & its rev is lesser.
+ * is_sil_rev_equal_to:		true if passed cpu type & its rev is equal.
+ * get_sil_rev:			return the silicon rev value.
+ */
+#define get_sil_omap_type(rev)	((rev & 0xffff0000) >> 16)
+#define get_sil_revision(rev)	((rev & 0x0000f000) >> 12)
+
+#define is_sil_rev_greater_than(rev) \
+		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+		(get_sil_revision(system_rev) > get_sil_revision(rev)))
+
+#define is_sil_rev_less_than(rev) \
+		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+		(get_sil_revision(system_rev) < get_sil_revision(rev)))
+
+#define is_sil_rev_equal_to(rev) \
+		((get_sil_omap_type(system_rev) == get_sil_omap_type(rev)) && \
+		(get_sil_revision(system_rev) == get_sil_revision(rev)))
+
+#define get_sil_rev() \
+		get_sil_revision(system_rev)
+
+/* Various silicon macros defined here */
+#define OMAP2420_REV_ES1_0	0x24200000
+#define OMAP2420_REV_ES2_0	0x24201000
+#define OMAP2430_REV_ES1_0	0x24300000
+#define OMAP3430_REV_ES1_0	0x34300000
+#define OMAP3430_REV_ES2_0	0x34301000
+#define OMAP3430_REV_ES2_1	0x34302000
+#define OMAP3430_REV_ES2_2	0x34303000
+
+/*
+ * omap_chip bits
+ *
+ * CHIP_IS_OMAP{2420,2430,3430} indicate that a particular structure is
+ * valid on all chips of that type.  CHIP_IS_OMAP3430ES{1,2} indicates
+ * something that is only valid on that particular ES revision.
+ *
+ * These bits may be ORed together to indicate structures that are
+ * available on multiple chip types.
+ *
+ * To test whether a particular structure matches the current OMAP chip type,
+ * use omap_chip_is().
+ *
+ */
+#define CHIP_IS_OMAP2420       (1 << 0)
+#define CHIP_IS_OMAP2430       (1 << 1)
+#define CHIP_IS_OMAP3430       (1 << 2)
+#define CHIP_IS_OMAP3430ES1    (1 << 3)
+#define CHIP_IS_OMAP3430ES2    (1 << 4)
+
+#define CHIP_IS_OMAP24XX       (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
+
+int omap_chip_is(struct omap_chip_id oci);
+
+
+/*
+ * Macro to detect device type i.e. EMU/HS/TST/GP/BAD
+ */
+#define DEVICE_TYPE_TEST	0
+#define DEVICE_TYPE_EMU		1
+#define DEVICE_TYPE_SEC		2
+#define DEVICE_TYPE_GP		3
+#define DEVICE_TYPE_BAD		4
+
+#define get_device_type()	((system_rev & 0x700) >> 8)
+#define is_device_type_test()	(get_device_type() == DEVICE_TYPE_TEST)
+#define is_device_type_emu()	(get_device_type() == DEVICE_TYPE_EMU)
+#define is_device_type_sec()	(get_device_type() == DEVICE_TYPE_SEC)
+#define is_device_type_gp()	(get_device_type() == DEVICE_TYPE_GP)
+#define is_device_type_bad()	(get_device_type() == DEVICE_TYPE_BAD)
+
+void omap2_check_revision(void);
+
+#endif    /* defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) */
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/plat-omap/include/mach/debug-macro.S
new file mode 100644
index 000000000000..1b0039bdeb4e
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/debug-macro.S
@@ -0,0 +1,58 @@
+/* arch/arm/plat-omap/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+#ifdef CONFIG_ARCH_OMAP1
+		moveq	\rx, #0xff000000	@ physical base address
+		movne	\rx, #0xfe000000	@ virtual base
+		orr	\rx, \rx, #0x00fb0000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		orr	\rx, \rx, #0x00009000	@ UART 3
+#endif
+#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
+		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
+#endif
+
+#elif  CONFIG_ARCH_OMAP2
+		moveq	\rx, #0x48000000	@ physical base address
+		movne	\rx, #0xd8000000	@ virtual base
+		orr	\rx, \rx, #0x0006a000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART2
+		add	\rx, \rx, #0x00002000	@ UART 2
+#endif
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		add	\rx, \rx, #0x00004000	@ UART 3
+#endif
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		beq	1002f
+		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		bne	1001b
+1002:
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
new file mode 100644
index 000000000000..54fe9665b182
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -0,0 +1,570 @@
+/*
+ *  arch/arm/plat-omap/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 Nokia Corporation
+ *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/* Hardware registers for omap1 */
+#define OMAP1_DMA_BASE			(0xfffed800)
+
+#define OMAP1_DMA_GCR			0x400
+#define OMAP1_DMA_GSCR			0x404
+#define OMAP1_DMA_GRST			0x408
+#define OMAP1_DMA_HW_ID			0x442
+#define OMAP1_DMA_PCH2_ID		0x444
+#define OMAP1_DMA_PCH0_ID		0x446
+#define OMAP1_DMA_PCH1_ID		0x448
+#define OMAP1_DMA_PCHG_ID		0x44a
+#define OMAP1_DMA_PCHD_ID		0x44c
+#define OMAP1_DMA_CAPS_0_U		0x44e
+#define OMAP1_DMA_CAPS_0_L		0x450
+#define OMAP1_DMA_CAPS_1_U		0x452
+#define OMAP1_DMA_CAPS_1_L		0x454
+#define OMAP1_DMA_CAPS_2		0x456
+#define OMAP1_DMA_CAPS_3		0x458
+#define OMAP1_DMA_CAPS_4		0x45a
+#define OMAP1_DMA_PCH2_SR		0x460
+#define OMAP1_DMA_PCH0_SR		0x480
+#define OMAP1_DMA_PCH1_SR		0x482
+#define OMAP1_DMA_PCHD_SR		0x4c0
+
+/* Hardware registers for omap2 and omap3 */
+#define OMAP24XX_DMA4_BASE		(L4_24XX_BASE + 0x56000)
+#define OMAP34XX_DMA4_BASE		(L4_34XX_BASE + 0x56000)
+
+#define OMAP_DMA4_REVISION		0x00
+#define OMAP_DMA4_GCR			0x78
+#define OMAP_DMA4_IRQSTATUS_L0		0x08
+#define OMAP_DMA4_IRQSTATUS_L1		0x0c
+#define OMAP_DMA4_IRQSTATUS_L2		0x10
+#define OMAP_DMA4_IRQSTATUS_L3		0x14
+#define OMAP_DMA4_IRQENABLE_L0		0x18
+#define OMAP_DMA4_IRQENABLE_L1		0x1c
+#define OMAP_DMA4_IRQENABLE_L2		0x20
+#define OMAP_DMA4_IRQENABLE_L3		0x24
+#define OMAP_DMA4_SYSSTATUS		0x28
+#define OMAP_DMA4_OCP_SYSCONFIG		0x2c
+#define OMAP_DMA4_CAPS_0		0x64
+#define OMAP_DMA4_CAPS_2		0x6c
+#define OMAP_DMA4_CAPS_3		0x70
+#define OMAP_DMA4_CAPS_4		0x74
+
+#define OMAP1_LOGICAL_DMA_CH_COUNT	17
+#define OMAP_DMA4_LOGICAL_DMA_CH_COUNT	32	/* REVISIT: Is this 32 + 2? */
+
+/* Common channel specific registers for omap1 */
+#define OMAP1_DMA_CH_BASE(n)		(0x40 * (n) + 0x00)
+#define OMAP1_DMA_CSDP(n)		(0x40 * (n) + 0x00)
+#define OMAP1_DMA_CCR(n)		(0x40 * (n) + 0x02)
+#define OMAP1_DMA_CICR(n)		(0x40 * (n) + 0x04)
+#define OMAP1_DMA_CSR(n)		(0x40 * (n) + 0x06)
+#define OMAP1_DMA_CEN(n)		(0x40 * (n) + 0x10)
+#define OMAP1_DMA_CFN(n)		(0x40 * (n) + 0x12)
+#define OMAP1_DMA_CSFI(n)		(0x40 * (n) + 0x14)
+#define OMAP1_DMA_CSEI(n)		(0x40 * (n) + 0x16)
+#define OMAP1_DMA_CPC(n)		(0x40 * (n) + 0x18)	/* 15xx only */
+#define OMAP1_DMA_CSAC(n)		(0x40 * (n) + 0x18)
+#define OMAP1_DMA_CDAC(n)		(0x40 * (n) + 0x1a)
+#define OMAP1_DMA_CDEI(n)		(0x40 * (n) + 0x1c)
+#define OMAP1_DMA_CDFI(n)		(0x40 * (n) + 0x1e)
+#define OMAP1_DMA_CLNK_CTRL(n)		(0x40 * (n) + 0x28)
+
+/* Common channel specific registers for omap2 */
+#define OMAP_DMA4_CH_BASE(n)		(0x60 * (n) + 0x80)
+#define OMAP_DMA4_CCR(n)		(0x60 * (n) + 0x80)
+#define OMAP_DMA4_CLNK_CTRL(n)		(0x60 * (n) + 0x84)
+#define OMAP_DMA4_CICR(n)		(0x60 * (n) + 0x88)
+#define OMAP_DMA4_CSR(n)		(0x60 * (n) + 0x8c)
+#define OMAP_DMA4_CSDP(n)		(0x60 * (n) + 0x90)
+#define OMAP_DMA4_CEN(n)		(0x60 * (n) + 0x94)
+#define OMAP_DMA4_CFN(n)		(0x60 * (n) + 0x98)
+#define OMAP_DMA4_CSEI(n)		(0x60 * (n) + 0xa4)
+#define OMAP_DMA4_CSFI(n)		(0x60 * (n) + 0xa8)
+#define OMAP_DMA4_CDEI(n)		(0x60 * (n) + 0xac)
+#define OMAP_DMA4_CDFI(n)		(0x60 * (n) + 0xb0)
+#define OMAP_DMA4_CSAC(n)		(0x60 * (n) + 0xb4)
+#define OMAP_DMA4_CDAC(n)		(0x60 * (n) + 0xb8)
+
+/* Channel specific registers only on omap1 */
+#define OMAP1_DMA_CSSA_L(n)		(0x40 * (n) + 0x08)
+#define OMAP1_DMA_CSSA_U(n)		(0x40 * (n) + 0x0a)
+#define OMAP1_DMA_CDSA_L(n)		(0x40 * (n) + 0x0c)
+#define OMAP1_DMA_CDSA_U(n)		(0x40 * (n) + 0x0e)
+#define OMAP1_DMA_COLOR_L(n)		(0x40 * (n) + 0x20)
+#define OMAP1_DMA_COLOR_U(n)		(0x40 * (n) + 0x22)
+#define OMAP1_DMA_CCR2(n)		(0x40 * (n) + 0x24)
+#define OMAP1_DMA_LCH_CTRL(n)		(0x40 * (n) + 0x2a)	/* not on 15xx */
+#define OMAP1_DMA_CCEN(n)		0
+#define OMAP1_DMA_CCFN(n)		0
+
+/* Channel specific registers only on omap2 */
+#define OMAP_DMA4_CSSA(n)		(0x60 * (n) + 0x9c)
+#define OMAP_DMA4_CDSA(n)		(0x60 * (n) + 0xa0)
+#define OMAP_DMA4_CCEN(n)		(0x60 * (n) + 0xbc)
+#define OMAP_DMA4_CCFN(n)		(0x60 * (n) + 0xc0)
+#define OMAP_DMA4_COLOR(n)		(0x60 * (n) + 0xc4)
+
+/* Dummy defines to keep multi-omap compiles happy */
+#define OMAP1_DMA_REVISION		0
+#define OMAP1_DMA_IRQSTATUS_L0		0
+#define OMAP1_DMA_IRQENABLE_L0		0
+#define OMAP1_DMA_OCP_SYSCONFIG		0
+#define OMAP_DMA4_HW_ID			0
+#define OMAP_DMA4_CAPS_0_L		0
+#define OMAP_DMA4_CAPS_0_U		0
+#define OMAP_DMA4_CAPS_1_L		0
+#define OMAP_DMA4_CAPS_1_U		0
+#define OMAP_DMA4_GSCR			0
+#define OMAP_DMA4_CPC(n)		0
+
+#define OMAP_DMA4_LCH_CTRL(n)		0
+#define OMAP_DMA4_COLOR_L(n)		0
+#define OMAP_DMA4_COLOR_U(n)		0
+#define OMAP_DMA4_CCR2(n)		0
+#define OMAP1_DMA_CSSA(n)		0
+#define OMAP1_DMA_CDSA(n)		0
+#define OMAP_DMA4_CSSA_L(n)		0
+#define OMAP_DMA4_CSSA_U(n)		0
+#define OMAP_DMA4_CDSA_L(n)		0
+#define OMAP_DMA4_CDSA_U(n)		0
+
+/*----------------------------------------------------------------------------*/
+
+/* DMA channels for omap1 */
+#define OMAP_DMA_NO_DEVICE		0
+#define OMAP_DMA_MCSI1_TX		1
+#define OMAP_DMA_MCSI1_RX		2
+#define OMAP_DMA_I2C_RX			3
+#define OMAP_DMA_I2C_TX			4
+#define OMAP_DMA_EXT_NDMA_REQ		5
+#define OMAP_DMA_EXT_NDMA_REQ2		6
+#define OMAP_DMA_UWIRE_TX		7
+#define OMAP_DMA_MCBSP1_TX		8
+#define OMAP_DMA_MCBSP1_RX		9
+#define OMAP_DMA_MCBSP3_TX		10
+#define OMAP_DMA_MCBSP3_RX		11
+#define OMAP_DMA_UART1_TX		12
+#define OMAP_DMA_UART1_RX		13
+#define OMAP_DMA_UART2_TX		14
+#define OMAP_DMA_UART2_RX		15
+#define OMAP_DMA_MCBSP2_TX		16
+#define OMAP_DMA_MCBSP2_RX		17
+#define OMAP_DMA_UART3_TX		18
+#define OMAP_DMA_UART3_RX		19
+#define OMAP_DMA_CAMERA_IF_RX		20
+#define OMAP_DMA_MMC_TX			21
+#define OMAP_DMA_MMC_RX			22
+#define OMAP_DMA_NAND			23
+#define OMAP_DMA_IRQ_LCD_LINE		24
+#define OMAP_DMA_MEMORY_STICK		25
+#define OMAP_DMA_USB_W2FC_RX0		26
+#define OMAP_DMA_USB_W2FC_RX1		27
+#define OMAP_DMA_USB_W2FC_RX2		28
+#define OMAP_DMA_USB_W2FC_TX0		29
+#define OMAP_DMA_USB_W2FC_TX1		30
+#define OMAP_DMA_USB_W2FC_TX2		31
+
+/* These are only for 1610 */
+#define OMAP_DMA_CRYPTO_DES_IN		32
+#define OMAP_DMA_SPI_TX			33
+#define OMAP_DMA_SPI_RX			34
+#define OMAP_DMA_CRYPTO_HASH		35
+#define OMAP_DMA_CCP_ATTN		36
+#define OMAP_DMA_CCP_FIFO_NOT_EMPTY	37
+#define OMAP_DMA_CMT_APE_TX_CHAN_0	38
+#define OMAP_DMA_CMT_APE_RV_CHAN_0	39
+#define OMAP_DMA_CMT_APE_TX_CHAN_1	40
+#define OMAP_DMA_CMT_APE_RV_CHAN_1	41
+#define OMAP_DMA_CMT_APE_TX_CHAN_2	42
+#define OMAP_DMA_CMT_APE_RV_CHAN_2	43
+#define OMAP_DMA_CMT_APE_TX_CHAN_3	44
+#define OMAP_DMA_CMT_APE_RV_CHAN_3	45
+#define OMAP_DMA_CMT_APE_TX_CHAN_4	46
+#define OMAP_DMA_CMT_APE_RV_CHAN_4	47
+#define OMAP_DMA_CMT_APE_TX_CHAN_5	48
+#define OMAP_DMA_CMT_APE_RV_CHAN_5	49
+#define OMAP_DMA_CMT_APE_TX_CHAN_6	50
+#define OMAP_DMA_CMT_APE_RV_CHAN_6	51
+#define OMAP_DMA_CMT_APE_TX_CHAN_7	52
+#define OMAP_DMA_CMT_APE_RV_CHAN_7	53
+#define OMAP_DMA_MMC2_TX		54
+#define OMAP_DMA_MMC2_RX		55
+#define OMAP_DMA_CRYPTO_DES_OUT		56
+
+/* DMA channels for 24xx */
+#define OMAP24XX_DMA_NO_DEVICE		0
+#define OMAP24XX_DMA_XTI_DMA		1	/* S_DMA_0 */
+#define OMAP24XX_DMA_EXT_DMAREQ0	2	/* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1	3	/* S_DMA_2 */
+#define OMAP24XX_DMA_GPMC		4	/* S_DMA_3 */
+#define OMAP24XX_DMA_GFX		5	/* S_DMA_4 */
+#define OMAP24XX_DMA_DSS		6	/* S_DMA_5 */
+#define OMAP242X_DMA_VLYNQ_TX		7	/* S_DMA_6 */
+#define OMAP24XX_DMA_EXT_DMAREQ2	7	/* S_DMA_6 */
+#define OMAP24XX_DMA_CWT		8	/* S_DMA_7 */
+#define OMAP24XX_DMA_AES_TX		9	/* S_DMA_8 */
+#define OMAP24XX_DMA_AES_RX		10	/* S_DMA_9 */
+#define OMAP24XX_DMA_DES_TX		11	/* S_DMA_10 */
+#define OMAP24XX_DMA_DES_RX		12	/* S_DMA_11 */
+#define OMAP24XX_DMA_SHA1MD5_RX		13	/* S_DMA_12 */
+#define OMAP34XX_DMA_SHA2MD5_RX		13	/* S_DMA_12 */
+#define OMAP242X_DMA_EXT_DMAREQ2	14	/* S_DMA_13 */
+#define OMAP242X_DMA_EXT_DMAREQ3	15	/* S_DMA_14 */
+#define OMAP242X_DMA_EXT_DMAREQ4	16	/* S_DMA_15 */
+#define OMAP242X_DMA_EAC_AC_RD		17	/* S_DMA_16 */
+#define OMAP242X_DMA_EAC_AC_WR		18	/* S_DMA_17 */
+#define OMAP242X_DMA_EAC_MD_UL_RD	19	/* S_DMA_18 */
+#define OMAP242X_DMA_EAC_MD_UL_WR	20	/* S_DMA_19 */
+#define OMAP242X_DMA_EAC_MD_DL_RD	21	/* S_DMA_20 */
+#define OMAP242X_DMA_EAC_MD_DL_WR	22	/* S_DMA_21 */
+#define OMAP242X_DMA_EAC_BT_UL_RD	23	/* S_DMA_22 */
+#define OMAP242X_DMA_EAC_BT_UL_WR	24	/* S_DMA_23 */
+#define OMAP242X_DMA_EAC_BT_DL_RD	25	/* S_DMA_24 */
+#define OMAP242X_DMA_EAC_BT_DL_WR	26	/* S_DMA_25 */
+#define OMAP243X_DMA_EXT_DMAREQ3	14	/* S_DMA_13 */
+#define OMAP24XX_DMA_SPI3_TX0		15	/* S_DMA_14 */
+#define OMAP24XX_DMA_SPI3_RX0		16	/* S_DMA_15 */
+#define OMAP24XX_DMA_MCBSP3_TX		17	/* S_DMA_16 */
+#define OMAP24XX_DMA_MCBSP3_RX		18	/* S_DMA_17 */
+#define OMAP24XX_DMA_MCBSP4_TX		19	/* S_DMA_18 */
+#define OMAP24XX_DMA_MCBSP4_RX		20	/* S_DMA_19 */
+#define OMAP24XX_DMA_MCBSP5_TX		21	/* S_DMA_20 */
+#define OMAP24XX_DMA_MCBSP5_RX		22	/* S_DMA_21 */
+#define OMAP24XX_DMA_SPI3_TX1		23	/* S_DMA_22 */
+#define OMAP24XX_DMA_SPI3_RX1		24	/* S_DMA_23 */
+#define OMAP243X_DMA_EXT_DMAREQ4	25	/* S_DMA_24 */
+#define OMAP243X_DMA_EXT_DMAREQ5	26	/* S_DMA_25 */
+#define OMAP34XX_DMA_I2C3_TX		25	/* S_DMA_24 */
+#define OMAP34XX_DMA_I2C3_RX		26	/* S_DMA_25 */
+#define OMAP24XX_DMA_I2C1_TX		27	/* S_DMA_26 */
+#define OMAP24XX_DMA_I2C1_RX		28	/* S_DMA_27 */
+#define OMAP24XX_DMA_I2C2_TX		29	/* S_DMA_28 */
+#define OMAP24XX_DMA_I2C2_RX		30	/* S_DMA_29 */
+#define OMAP24XX_DMA_MCBSP1_TX		31	/* S_DMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX		32	/* S_DMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX		33	/* S_DMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX		34	/* S_DMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0		35	/* S_DMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0		36	/* S_DMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1		37	/* S_DMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1		38	/* S_DMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2		39	/* S_DMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2		40	/* S_DMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3		41	/* S_DMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3		42	/* S_DMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0		43	/* S_DMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0		44	/* S_DMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1		45	/* S_DMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1		46	/* S_DMA_45 */
+#define OMAP24XX_DMA_MMC2_TX		47	/* S_DMA_46 */
+#define OMAP24XX_DMA_MMC2_RX		48	/* S_DMA_47 */
+#define OMAP24XX_DMA_UART1_TX		49	/* S_DMA_48 */
+#define OMAP24XX_DMA_UART1_RX		50	/* S_DMA_49 */
+#define OMAP24XX_DMA_UART2_TX		51	/* S_DMA_50 */
+#define OMAP24XX_DMA_UART2_RX		52	/* S_DMA_51 */
+#define OMAP24XX_DMA_UART3_TX		53	/* S_DMA_52 */
+#define OMAP24XX_DMA_UART3_RX		54	/* S_DMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0	55	/* S_DMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0	56	/* S_DMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1	57	/* S_DMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1	58	/* S_DMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2	59	/* S_DMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2	60	/* S_DMA_59 */
+#define OMAP24XX_DMA_MMC1_TX		61	/* S_DMA_60 */
+#define OMAP24XX_DMA_MMC1_RX		62	/* S_DMA_61 */
+#define OMAP24XX_DMA_MS			63	/* S_DMA_62 */
+#define OMAP242X_DMA_EXT_DMAREQ5	64	/* S_DMA_63 */
+#define OMAP243X_DMA_EXT_DMAREQ6	64	/* S_DMA_63 */
+#define OMAP34XX_DMA_EXT_DMAREQ3	64	/* S_DMA_63 */
+#define OMAP34XX_DMA_AES2_TX		65	/* S_DMA_64 */
+#define OMAP34XX_DMA_AES2_RX		66	/* S_DMA_65 */
+#define OMAP34XX_DMA_DES2_TX		67	/* S_DMA_66 */
+#define OMAP34XX_DMA_DES2_RX		68	/* S_DMA_67 */
+#define OMAP34XX_DMA_SHA1MD5_RX		69	/* S_DMA_68 */
+#define OMAP34XX_DMA_SPI4_TX0		70	/* S_DMA_69 */
+#define OMAP34XX_DMA_SPI4_RX0		71	/* S_DMA_70 */
+#define OMAP34XX_DSS_DMA0		72	/* S_DMA_71 */
+#define OMAP34XX_DSS_DMA1		73	/* S_DMA_72 */
+#define OMAP34XX_DSS_DMA2		74	/* S_DMA_73 */
+#define OMAP34XX_DSS_DMA3		75	/* S_DMA_74 */
+#define OMAP34XX_DMA_MMC3_TX		77	/* S_DMA_76 */
+#define OMAP34XX_DMA_MMC3_RX		78	/* S_DMA_77 */
+#define OMAP34XX_DMA_USIM_TX		79	/* S_DMA_78 */
+#define OMAP34XX_DMA_USIM_RX		80	/* S_DMA_79 */
+
+/*----------------------------------------------------------------------------*/
+
+/* Hardware registers for LCD DMA */
+#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
+#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
+#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
+#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
+#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
+#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
+
+#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
+#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
+#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
+#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
+#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
+#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
+#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
+#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
+#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
+#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
+#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
+#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
+#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
+#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
+#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
+#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
+
+#define OMAP1_DMA_TOUT_IRQ		(1 << 0)
+#define OMAP_DMA_DROP_IRQ		(1 << 1)
+#define OMAP_DMA_HALF_IRQ		(1 << 2)
+#define OMAP_DMA_FRAME_IRQ		(1 << 3)
+#define OMAP_DMA_LAST_IRQ		(1 << 4)
+#define OMAP_DMA_BLOCK_IRQ		(1 << 5)
+#define OMAP1_DMA_SYNC_IRQ		(1 << 6)
+#define OMAP2_DMA_PKT_IRQ		(1 << 7)
+#define OMAP2_DMA_TRANS_ERR_IRQ		(1 << 8)
+#define OMAP2_DMA_SECURE_ERR_IRQ	(1 << 9)
+#define OMAP2_DMA_SUPERVISOR_ERR_IRQ	(1 << 10)
+#define OMAP2_DMA_MISALIGNED_ERR_IRQ	(1 << 11)
+
+#define OMAP_DMA_DATA_TYPE_S8		0x00
+#define OMAP_DMA_DATA_TYPE_S16		0x01
+#define OMAP_DMA_DATA_TYPE_S32		0x02
+
+#define OMAP_DMA_SYNC_ELEMENT		0x00
+#define OMAP_DMA_SYNC_FRAME		0x01
+#define OMAP_DMA_SYNC_BLOCK		0x02
+#define OMAP_DMA_SYNC_PACKET		0x03
+
+#define OMAP_DMA_SRC_SYNC		0x01
+#define OMAP_DMA_DST_SYNC		0x00
+
+#define OMAP_DMA_PORT_EMIFF		0x00
+#define OMAP_DMA_PORT_EMIFS		0x01
+#define OMAP_DMA_PORT_OCP_T1		0x02
+#define OMAP_DMA_PORT_TIPB		0x03
+#define OMAP_DMA_PORT_OCP_T2		0x04
+#define OMAP_DMA_PORT_MPUI		0x05
+
+#define OMAP_DMA_AMODE_CONSTANT		0x00
+#define OMAP_DMA_AMODE_POST_INC		0x01
+#define OMAP_DMA_AMODE_SINGLE_IDX	0x02
+#define OMAP_DMA_AMODE_DOUBLE_IDX	0x03
+
+#define DMA_DEFAULT_FIFO_DEPTH		0x10
+#define DMA_DEFAULT_ARB_RATE		0x01
+/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */
+#define DMA_THREAD_RESERVE_NORM		(0x00 << 12) /* Def */
+#define DMA_THREAD_RESERVE_ONET		(0x01 << 12)
+#define DMA_THREAD_RESERVE_TWOT		(0x02 << 12)
+#define DMA_THREAD_RESERVE_THREET	(0x03 << 12)
+#define DMA_THREAD_FIFO_NONE		(0x00 << 14) /* Def */
+#define DMA_THREAD_FIFO_75		(0x01 << 14)
+#define DMA_THREAD_FIFO_25		(0x02 << 14)
+#define DMA_THREAD_FIFO_50		(0x03 << 14)
+
+/* Chaining modes*/
+#ifndef CONFIG_ARCH_OMAP1
+#define OMAP_DMA_STATIC_CHAIN		0x1
+#define OMAP_DMA_DYNAMIC_CHAIN		0x2
+#define OMAP_DMA_CHAIN_ACTIVE		0x1
+#define OMAP_DMA_CHAIN_INACTIVE		0x0
+#endif
+
+#define DMA_CH_PRIO_HIGH		0x1
+#define DMA_CH_PRIO_LOW			0x0 /* Def */
+
+/* LCD DMA block numbers */
+enum {
+	OMAP_LCD_DMA_B1_TOP,
+	OMAP_LCD_DMA_B1_BOTTOM,
+	OMAP_LCD_DMA_B2_TOP,
+	OMAP_LCD_DMA_B2_BOTTOM
+};
+
+enum omap_dma_burst_mode {
+	OMAP_DMA_DATA_BURST_DIS = 0,
+	OMAP_DMA_DATA_BURST_4,
+	OMAP_DMA_DATA_BURST_8,
+	OMAP_DMA_DATA_BURST_16,
+};
+
+enum end_type {
+	OMAP_DMA_LITTLE_ENDIAN = 0,
+	OMAP_DMA_BIG_ENDIAN
+};
+
+enum omap_dma_color_mode {
+	OMAP_DMA_COLOR_DIS = 0,
+	OMAP_DMA_CONSTANT_FILL,
+	OMAP_DMA_TRANSPARENT_COPY
+};
+
+enum omap_dma_write_mode {
+	OMAP_DMA_WRITE_NON_POSTED = 0,
+	OMAP_DMA_WRITE_POSTED,
+	OMAP_DMA_WRITE_LAST_NON_POSTED
+};
+
+enum omap_dma_channel_mode {
+	OMAP_DMA_LCH_2D = 0,
+	OMAP_DMA_LCH_G,
+	OMAP_DMA_LCH_P,
+	OMAP_DMA_LCH_PD
+};
+
+struct omap_dma_channel_params {
+	int data_type;		/* data type 8,16,32 */
+	int elem_count;		/* number of elements in a frame */
+	int frame_count;	/* number of frames in a element */
+
+	int src_port;		/* Only on OMAP1 REVISIT: Is this needed? */
+	int src_amode;		/* constant, post increment, indexed,
+					double indexed */
+	unsigned long src_start;	/* source address : physical */
+	int src_ei;		/* source element index */
+	int src_fi;		/* source frame index */
+
+	int dst_port;		/* Only on OMAP1 REVISIT: Is this needed? */
+	int dst_amode;		/* constant, post increment, indexed,
+					double indexed */
+	unsigned long dst_start;	/* source address : physical */
+	int dst_ei;		/* source element index */
+	int dst_fi;		/* source frame index */
+
+	int trigger;		/* trigger attached if the channel is
+					synchronized */
+	int sync_mode;		/* sycn on element, frame , block or packet */
+	int src_or_dst_synch;	/* source synch(1) or destination synch(0) */
+
+	int ie;			/* interrupt enabled */
+
+	unsigned char read_prio;/* read priority */
+	unsigned char write_prio;/* write priority */
+
+#ifndef CONFIG_ARCH_OMAP1
+	enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */
+#endif
+};
+
+
+extern void omap_set_dma_priority(int lch, int dst_port, int priority);
+extern int omap_request_dma(int dev_id, const char *dev_name,
+			void (*callback)(int lch, u16 ch_status, void *data),
+			void *data, int *dma_ch);
+extern void omap_enable_dma_irq(int ch, u16 irq_bits);
+extern void omap_disable_dma_irq(int ch, u16 irq_bits);
+extern void omap_free_dma(int ch);
+extern void omap_start_dma(int lch);
+extern void omap_stop_dma(int lch);
+extern void omap_set_dma_transfer_params(int lch, int data_type,
+					 int elem_count, int frame_count,
+					 int sync_mode,
+					 int dma_trigger, int src_or_dst_synch);
+extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
+				    u32 color);
+extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
+extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
+
+extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
+				    unsigned long src_start,
+				    int src_ei, int src_fi);
+extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_src_data_pack(int lch, int enable);
+extern void omap_set_dma_src_burst_mode(int lch,
+					enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
+				     unsigned long dest_start,
+				     int dst_ei, int dst_fi);
+extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_dest_data_pack(int lch, int enable);
+extern void omap_set_dma_dest_burst_mode(int lch,
+					 enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_params(int lch,
+				struct omap_dma_channel_params *params);
+
+extern void omap_dma_link_lch(int lch_head, int lch_queue);
+extern void omap_dma_unlink_lch(int lch_head, int lch_queue);
+
+extern int omap_set_dma_callback(int lch,
+			void (*callback)(int lch, u16 ch_status, void *data),
+			void *data);
+extern dma_addr_t omap_get_dma_src_pos(int lch);
+extern dma_addr_t omap_get_dma_dst_pos(int lch);
+extern void omap_clear_dma(int lch);
+extern int omap_get_dma_active_status(int lch);
+extern int omap_dma_running(void);
+extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
+				       int tparams);
+extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
+				 unsigned char write_prio);
+extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
+extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
+extern int omap_get_dma_index(int lch, int *ei, int *fi);
+
+/* Chaining APIs */
+#ifndef CONFIG_ARCH_OMAP1
+extern int omap_request_dma_chain(int dev_id, const char *dev_name,
+				  void (*callback) (int chain_id, u16 ch_status,
+						    void *data),
+				  int *chain_id, int no_of_chans,
+				  int chain_mode,
+				  struct omap_dma_channel_params params);
+extern int omap_free_dma_chain(int chain_id);
+extern int omap_dma_chain_a_transfer(int chain_id, int src_start,
+				     int dest_start, int elem_count,
+				     int frame_count, void *callbk_data);
+extern int omap_start_dma_chain_transfers(int chain_id);
+extern int omap_stop_dma_chain_transfers(int chain_id);
+extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi);
+extern int omap_get_dma_chain_dst_pos(int chain_id);
+extern int omap_get_dma_chain_src_pos(int chain_id);
+
+extern int omap_modify_dma_chain_params(int chain_id,
+					struct omap_dma_channel_params params);
+extern int omap_dma_chain_status(int chain_id);
+#endif
+
+/* LCD DMA functions */
+extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+				void *data);
+extern void omap_free_lcd_dma(void);
+extern void omap_setup_lcd_dma(void);
+extern void omap_enable_lcd_dma(void);
+extern void omap_stop_lcd_dma(void);
+extern void omap_set_lcd_dma_ext_controller(int external);
+extern void omap_set_lcd_dma_single_transfer(int single);
+extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+				int data_type);
+extern void omap_set_lcd_dma_b1_rotation(int rotate);
+extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
+extern void omap_set_lcd_dma_b1_mirror(int mirror);
+extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h
new file mode 100644
index 000000000000..6dc703138210
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/dmtimer.h
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/plat-omap/include/mach/dmtimer.h
+ *
+ * OMAP Dual-Mode Timers
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * PWM and clock framwork support by Timo Teras.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_DMTIMER_H
+#define __ASM_ARCH_DMTIMER_H
+
+/* clock sources */
+#define OMAP_TIMER_SRC_SYS_CLK			0x00
+#define OMAP_TIMER_SRC_32_KHZ			0x01
+#define OMAP_TIMER_SRC_EXT_CLK			0x02
+
+/* timer interrupt enable bits */
+#define OMAP_TIMER_INT_CAPTURE			(1 << 2)
+#define OMAP_TIMER_INT_OVERFLOW			(1 << 1)
+#define OMAP_TIMER_INT_MATCH			(1 << 0)
+
+/* trigger types */
+#define OMAP_TIMER_TRIGGER_NONE			0x00
+#define OMAP_TIMER_TRIGGER_OVERFLOW		0x01
+#define OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE	0x02
+
+struct omap_dm_timer;
+struct clk;
+
+int omap_dm_timer_init(void);
+
+struct omap_dm_timer *omap_dm_timer_request(void);
+struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id);
+void omap_dm_timer_free(struct omap_dm_timer *timer);
+void omap_dm_timer_enable(struct omap_dm_timer *timer);
+void omap_dm_timer_disable(struct omap_dm_timer *timer);
+
+int omap_dm_timer_get_irq(struct omap_dm_timer *timer);
+
+u32 omap_dm_timer_modify_idlect_mask(u32 inputmask);
+struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer);
+
+void omap_dm_timer_trigger(struct omap_dm_timer *timer);
+void omap_dm_timer_start(struct omap_dm_timer *timer);
+void omap_dm_timer_stop(struct omap_dm_timer *timer);
+
+void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
+void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
+void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
+void omap_dm_timer_set_pwm(struct omap_dm_timer *timer, int def_on, int toggle, int trigger);
+void omap_dm_timer_set_prescaler(struct omap_dm_timer *timer, int prescaler);
+
+void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
+
+unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
+void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
+unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
+void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value);
+
+int omap_dm_timers_active(void);
+
+
+#endif /* __ASM_ARCH_DMTIMER_H */
diff --git a/arch/arm/plat-omap/include/mach/dsp_common.h b/arch/arm/plat-omap/include/mach/dsp_common.h
new file mode 100644
index 000000000000..da97736f3efa
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/dsp_common.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of OMAP DSP driver (DSP Gateway version 3.3.1)
+ *
+ * Copyright (C) 2004-2006 Nokia Corporation. All rights reserved.
+ *
+ * Contact: Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef ASM_ARCH_DSP_COMMON_H
+#define ASM_ARCH_DSP_COMMON_H
+
+#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_OMAP_MMU_FWK)
+extern void omap_dsp_request_mpui(void);
+extern void omap_dsp_release_mpui(void);
+extern int omap_dsp_request_mem(void);
+extern int omap_dsp_release_mem(void);
+#else
+static inline int omap_dsp_request_mem(void)
+{
+	return 0;
+}
+#define omap_dsp_release_mem()	do {} while (0)
+#endif
+
+#endif /* ASM_ARCH_DSP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/mach/eac.h b/arch/arm/plat-omap/include/mach/eac.h
new file mode 100644
index 000000000000..9e62cf030270
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/eac.h
@@ -0,0 +1,100 @@
+/*
+ * arch/arm/plat-omap/include/mach2/eac.h
+ *
+ * Defines for Enhanced Audio Controller
+ *
+ * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H
+#define __ASM_ARM_ARCH_OMAP2_EAC_H
+
+#include <mach/io.h>
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <sound/core.h>
+
+/* master codec clock source */
+#define EAC_MCLK_EXT_MASK	0x100
+enum eac_mclk_src {
+	EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */
+	EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK,
+	EAC_MCLK_EXT_12288000,
+	EAC_MCLK_EXT_2x11289600,
+	EAC_MCLK_EXT_2x12288000,
+};
+
+/* codec port interface mode */
+enum eac_codec_mode {
+	EAC_CODEC_PCM,
+	EAC_CODEC_AC97,
+	EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */
+	EAC_CODEC_I2S_SLAVE,
+};
+
+/* configuration structure for I2S mode */
+struct eac_i2s_conf {
+	/* if enabled, then first data slot (left channel) is signaled as
+	 * positive level of frame sync EAC.AC_FS */
+	unsigned	polarity_changed_mode:1;
+	/* if enabled, then serial data starts one clock cycle after the
+	 * of EAC.AC_FS for first audio slot */
+	unsigned	sync_delay_enable:1;
+};
+
+/* configuration structure for EAC codec port */
+struct eac_codec {
+	enum eac_mclk_src	mclk_src;
+
+	enum eac_codec_mode	codec_mode;
+	union {
+		struct eac_i2s_conf	i2s;
+	} codec_conf;
+
+	int		default_rate; /* audio sampling rate */
+
+	int		(* set_power)(void *private_data, int dac, int adc);
+	int		(* register_controls)(void *private_data,
+					      struct snd_card *card);
+	const char 	*short_name;
+
+	void		*private_data;
+};
+
+/* structure for passing platform dependent data to the EAC driver */
+struct eac_platform_data {
+        int	(* init)(struct device *eac_dev);
+	void	(* cleanup)(struct device *eac_dev);
+	/* these callbacks are used to configure & control external MCLK
+	 * source. NULL if not used */
+	int	(* enable_ext_clocks)(struct device *eac_dev);
+	void	(* disable_ext_clocks)(struct device *eac_dev);
+};
+
+extern void omap_init_eac(struct eac_platform_data *pdata);
+
+extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec);
+extern void eac_unregister_codec(struct device *eac_dev);
+
+extern int eac_set_mode(struct device *eac_dev, int play, int rec);
+
+#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S
new file mode 100644
index 000000000000..d4e9043bf201
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/entry-macro.S
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/plat-omap/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for OMAP-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/irqs.h>
+
+#if defined(CONFIG_ARCH_OMAP1)
+
+#if defined(CONFIG_ARCH_OMAP730) && \
+	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
+#error "FIXME: OMAP730 doesn't support multiple-OMAP"
+#elif defined(CONFIG_ARCH_OMAP730)
+#define INT_IH2_IRQ		INT_730_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP15XX)
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP16XX)
+#define INT_IH2_IRQ		INT_1610_IH2_IRQ
+#else
+#warning "IH2 IRQ defaulted"
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#endif
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =IO_ADDRESS(OMAP_IH1_BASE)
+		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
+		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
+		mov	\irqstat, #0xffffffff
+		bic	\tmp, \irqstat, \tmp
+		tst	\irqnr, \tmp
+		beq	1510f
+
+		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
+		cmp	\irqnr, #0
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		cmpeq	\irqnr, #INT_IH2_IRQ
+		ldreq	\base, =IO_ADDRESS(OMAP_IH2_BASE)
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		addeqs	\irqnr, \irqnr, #32
+1510:
+		.endm
+
+#elif defined(CONFIG_ARCH_OMAP24XX)
+
+#include <mach/omap24xx.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =OMAP2_VA_IC_BASE
+		ldr	\irqnr, [\base, #0x98] /* IRQ pending reg 1 */
+		cmp	\irqnr, #0x0
+		bne	2222f
+		ldr	\irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
+		cmp	\irqnr, #0x0
+		bne	2222f
+		ldr	\irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
+		cmp	\irqnr, #0x0
+2222:
+		ldrne	\irqnr, [\base, #IRQ_SIR_IRQ]
+
+		.endm
+
+		.macro	irq_prio_table
+		.endm
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/mach/fpga.h
new file mode 100644
index 000000000000..c92e4b42b289
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/fpga.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/plat-omap/include/mach/fpga.h
+ *
+ * Interrupt handler for OMAP-1510 FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FPGA_H
+#define __ASM_ARCH_OMAP_FPGA_H
+
+#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
+extern void omap1510_fpga_init_irq(void);
+#else
+#define omap1510_fpga_init_irq()	(0)
+#endif
+
+#define fpga_read(reg)			__raw_readb(reg)
+#define fpga_write(val, reg)		__raw_writeb(val, reg)
+
+/*
+ * ---------------------------------------------------------------------------
+ *  H2/P2 Debug board FPGA
+ * ---------------------------------------------------------------------------
+ */
+/* maps in the FPGA registers and the ETHR registers */
+#define H2P2_DBG_FPGA_BASE		0xE8000000	/* VA */
+#define H2P2_DBG_FPGA_SIZE		SZ_4K		/* SIZE */
+#define H2P2_DBG_FPGA_START		0x04000000	/* PA */
+
+#define H2P2_DBG_FPGA_ETHR_START	(H2P2_DBG_FPGA_START + 0x300)
+#define H2P2_DBG_FPGA_FPGA_REV		(H2P2_DBG_FPGA_BASE + 0x10)	/* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV		(H2P2_DBG_FPGA_BASE + 0x12)	/* Board Revision */
+#define H2P2_DBG_FPGA_GPIO		(H2P2_DBG_FPGA_BASE + 0x14)	/* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS		(H2P2_DBG_FPGA_BASE + 0x16)	/* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS	(H2P2_DBG_FPGA_BASE + 0x18)	/* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS	(H2P2_DBG_FPGA_BASE + 0x1A)	/* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET		(H2P2_DBG_FPGA_BASE + 0x1C)	/* LAN Reset line */
+
+/* NOTE:  most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+	/* offset 0x00 */
+	u16		smc91x[8];
+	/* offset 0x10 */
+	u16		fpga_rev;
+	u16		board_rev;
+	u16		gpio_outputs;
+	u16		leds;
+	/* offset 0x18 */
+	u16		misc_inputs;
+	u16		lan_status;
+	u16		lan_reset;
+	u16		reserved0;
+	/* offset 0x20 */
+	u16		ps2_data;
+	u16		ps2_ctrl;
+	/* plus also 4 rs232 ports ... */
+};
+
+/* LEDs definition on debug board (16 LEDs, all physically green) */
+#define H2P2_DBG_FPGA_LED_GREEN		(1 << 15)
+#define H2P2_DBG_FPGA_LED_AMBER		(1 << 14)
+#define H2P2_DBG_FPGA_LED_RED		(1 << 13)
+#define H2P2_DBG_FPGA_LED_BLUE		(1 << 12)
+/*  cpu0 load-meter LEDs */
+#define H2P2_DBG_FPGA_LOAD_METER	(1 << 0)	// A bit of fun on our board ...
+#define H2P2_DBG_FPGA_LOAD_METER_SIZE	11
+#define H2P2_DBG_FPGA_LOAD_METER_MASK	((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
+
+#define H2P2_DBG_FPGA_P2_LED_TIMER		(1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE		(1 << 1)
+
+/*
+ * ---------------------------------------------------------------------------
+ *  OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE			0xE8000000	/* Virtual */
+#define OMAP1510_FPGA_SIZE			SZ_4K
+#define OMAP1510_FPGA_START			0x08000000	/* Physical */
+
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW			(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH			(OMAP1510_FPGA_BASE + 0x1)
+
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL		(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT			(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI			(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER			(OMAP1510_FPGA_BASE + 0x5)
+
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO			(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI			(OMAP1510_FPGA_BASE + 0x7)
+
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO			(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI			(OMAP1510_FPGA_BASE + 0x9)
+
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET		(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST			(OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO			(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP			(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO			(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1			(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2			(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS		(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV			(OMAP1510_FPGA_BASE + 0x18)
+#define OMAP1510P1_PPT_DATA			(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS			(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL			(OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN		(OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO			(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO		(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI		(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO		(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI		(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO		(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI		(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL		(OMAP1510_FPGA_BASE + 0x20c)
+#define INNOVATOR_FPGA_EXP_CONTROL		(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2			(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2			(OMAP1510_FPGA_BASE + 0x210)
+
+#define OMAP1510_FPGA_ETHR_START		(OMAP1510_FPGA_START + 0x300)
+
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE		0x42
+
+#define OMAP1510_FPGA_PCR_IF_PD0		(1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN		(1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN		(1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0		(1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1		(1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK		(1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK		(1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0		(1 << 0)
+
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK	(1<<0)	/* output */
+#define OMAP1510_FPGA_HID_MOSI	(1<<1)	/* output */
+#define OMAP1510_FPGA_HID_nSS	(1<<2)	/* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS	(1<<3)	/* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO	(1<<4)	/* input */
+#define OMAP1510_FPGA_HID_ATN	(1<<5)	/* input  0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd	(1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7)	/* output - 0/1 USAR reset/run */
+
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA		(IH_GPIO_BASE + 13)
+
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_INT_FPGA_ATN		(OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK		(OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2		(OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3		(OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4		(OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5		(OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6		(OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7		(OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8		(OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9		(OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10		(OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11		(OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12		(OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER		(OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1		(OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2		(OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS		(OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17		(OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM		(OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A		(OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B		(OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD		(OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22		(OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23		(OMAP_FPGA_IRQ_BASE + 23)
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/gpio-switch.h b/arch/arm/plat-omap/include/mach/gpio-switch.h
new file mode 100644
index 000000000000..10da0e07c0cf
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpio-switch.h
@@ -0,0 +1,54 @@
+/*
+ * GPIO switch definitions
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H
+#define __ASM_ARCH_OMAP_GPIO_SWITCH_H
+
+#include <linux/types.h>
+
+/* Cover:
+ *	high -> closed
+ *	low  -> open
+ * Connection:
+ *	high -> connected
+ *	low  -> disconnected
+ * Activity:
+ *	high -> active
+ *	low  -> inactive
+ *
+ */
+#define OMAP_GPIO_SWITCH_TYPE_COVER		0x0000
+#define OMAP_GPIO_SWITCH_TYPE_CONNECTION	0x0001
+#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY		0x0002
+#define OMAP_GPIO_SWITCH_FLAG_INVERTED		0x0001
+#define OMAP_GPIO_SWITCH_FLAG_OUTPUT		0x0002
+
+struct omap_gpio_switch {
+	const char *name;
+	s16 gpio;
+	unsigned flags:4;
+	unsigned type:4;
+
+	/* Time in ms to debounce when transitioning from
+	 * inactive state to active state. */
+	u16 debounce_rising;
+	/* Same for transition from active to inactive state. */
+	u16 debounce_falling;
+
+	/* notify board-specific code about state changes */
+	void (* notify)(void *data, int state);
+	void *notify_data;
+};
+
+/* Call at init time only */
+extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl,
+					int count);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h
new file mode 100644
index 000000000000..94ce2780e8ee
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpio.h
@@ -0,0 +1,122 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpio.h
+ *
+ * OMAP GPIO handling defines and functions
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIO_H
+#define __ASM_ARCH_OMAP_GPIO_H
+
+#include <mach/irqs.h>
+#include <asm/io.h>
+
+#define OMAP_MPUIO_BASE			(void __iomem *)0xfffb5000
+
+#ifdef CONFIG_ARCH_OMAP730
+#define OMAP_MPUIO_INPUT_LATCH		0x00
+#define OMAP_MPUIO_OUTPUT		0x02
+#define OMAP_MPUIO_IO_CNTL		0x04
+#define OMAP_MPUIO_KBR_LATCH		0x08
+#define OMAP_MPUIO_KBC			0x0a
+#define OMAP_MPUIO_GPIO_EVENT_MODE	0x0c
+#define OMAP_MPUIO_GPIO_INT_EDGE	0x0e
+#define OMAP_MPUIO_KBD_INT		0x10
+#define OMAP_MPUIO_GPIO_INT		0x12
+#define OMAP_MPUIO_KBD_MASKIT		0x14
+#define OMAP_MPUIO_GPIO_MASKIT		0x16
+#define OMAP_MPUIO_GPIO_DEBOUNCING	0x18
+#define OMAP_MPUIO_LATCH		0x1a
+#else
+#define OMAP_MPUIO_INPUT_LATCH		0x00
+#define OMAP_MPUIO_OUTPUT		0x04
+#define OMAP_MPUIO_IO_CNTL		0x08
+#define OMAP_MPUIO_KBR_LATCH		0x10
+#define OMAP_MPUIO_KBC			0x14
+#define OMAP_MPUIO_GPIO_EVENT_MODE	0x18
+#define OMAP_MPUIO_GPIO_INT_EDGE	0x1c
+#define OMAP_MPUIO_KBD_INT		0x20
+#define OMAP_MPUIO_GPIO_INT		0x24
+#define OMAP_MPUIO_KBD_MASKIT		0x28
+#define OMAP_MPUIO_GPIO_MASKIT		0x2c
+#define OMAP_MPUIO_GPIO_DEBOUNCING	0x30
+#define OMAP_MPUIO_LATCH		0x34
+#endif
+
+#define OMAP34XX_NR_GPIOS		6
+
+#define OMAP_MPUIO(nr)		(OMAP_MAX_GPIO_LINES + (nr))
+#define OMAP_GPIO_IS_MPUIO(nr)	((nr) >= OMAP_MAX_GPIO_LINES)
+
+#define OMAP_GPIO_IRQ(nr)	(OMAP_GPIO_IS_MPUIO(nr) ? \
+				 IH_MPUIO_BASE + ((nr) & 0x0f) : \
+				 IH_GPIO_BASE + (nr))
+
+extern int omap_gpio_init(void);	/* Call from board init only */
+extern int omap_request_gpio(int gpio);
+extern void omap_free_gpio(int gpio);
+extern void omap_set_gpio_direction(int gpio, int is_input);
+extern void omap_set_gpio_dataout(int gpio, int enable);
+extern int omap_get_gpio_datain(int gpio);
+extern void omap_set_gpio_debounce(int gpio, int enable);
+extern void omap_set_gpio_debounce_time(int gpio, int enable);
+
+/*-------------------------------------------------------------------------*/
+
+/* Wrappers for "new style" GPIO calls, using the new infrastructure
+ * which lets us plug in FPGA, I2C, and other implementations.
+ * *
+ * The original OMAP-specfic calls should eventually be removed.
+ */
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+	if (gpio < (OMAP_MAX_GPIO_LINES + 16))
+		return OMAP_GPIO_IRQ(gpio);
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+	if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16)))
+		return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES;
+	return irq - IH_GPIO_BASE;
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/gpioexpander.h b/arch/arm/plat-omap/include/mach/gpioexpander.h
new file mode 100644
index 000000000000..90444a0d6b1a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpioexpander.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpioexpander.h
+ *
+ *
+ * Copyright (C) 2004 Texas Instruments, Inc.
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H
+#define __ASM_ARCH_OMAP_GPIOEXPANDER_H
+
+/* Function Prototypes for GPIO Expander functions */
+
+#ifdef CONFIG_GPIOEXPANDER_OMAP
+int read_gpio_expa(u8 *, int);
+int write_gpio_expa(u8 , int);
+#else
+static inline int read_gpio_expa(u8 *val, int addr)
+{
+	return 0;
+}
+static inline int write_gpio_expa(u8 val, int addr)
+{
+	return 0;
+}
+#endif
+
+#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/mach/gpmc.h
new file mode 100644
index 000000000000..6a8e07ffc2d0
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpmc.h
@@ -0,0 +1,96 @@
+/*
+ * General-Purpose Memory Controller for OMAP2
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_GPMC_H
+#define __OMAP2_GPMC_H
+
+#define GPMC_CS_CONFIG1		0x00
+#define GPMC_CS_CONFIG2		0x04
+#define GPMC_CS_CONFIG3		0x08
+#define GPMC_CS_CONFIG4		0x0c
+#define GPMC_CS_CONFIG5		0x10
+#define GPMC_CS_CONFIG6		0x14
+#define GPMC_CS_CONFIG7		0x18
+#define GPMC_CS_NAND_COMMAND	0x1c
+#define GPMC_CS_NAND_ADDRESS	0x20
+#define GPMC_CS_NAND_DATA	0x24
+
+#define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
+#define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
+#define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
+#define GPMC_CONFIG1_READTYPE_SYNC      (1 << 29)
+#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
+#define GPMC_CONFIG1_WRITETYPE_ASYNC    (0 << 27)
+#define GPMC_CONFIG1_WRITETYPE_SYNC     (1 << 27)
+#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
+#define GPMC_CONFIG1_PAGE_LEN(val)      ((val & 3) << 23)
+#define GPMC_CONFIG1_WAIT_READ_MON      (1 << 22)
+#define GPMC_CONFIG1_WAIT_WRITE_MON     (1 << 21)
+#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
+#define GPMC_CONFIG1_WAIT_PIN_SEL(val)  ((val & 3) << 16)
+#define GPMC_CONFIG1_DEVICESIZE(val)    ((val & 3) << 12)
+#define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
+#define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
+#define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
+#define GPMC_CONFIG1_DEVICETYPE_NAND    GPMC_CONFIG1_DEVICETYPE(1)
+#define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
+#define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
+#define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
+#define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
+#define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
+#define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
+
+/*
+ * Note that all values in this struct are in nanoseconds, while
+ * the register values are in gpmc_fck cycles.
+ */
+struct gpmc_timings {
+	/* Minimum clock period for synchronous mode */
+	u16 sync_clk;
+
+	/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
+	u16 cs_on;		/* Assertion time */
+	u16 cs_rd_off;		/* Read deassertion time */
+	u16 cs_wr_off;		/* Write deassertion time */
+
+	/* ADV signal timings corresponding to GPMC_CONFIG3 */
+	u16 adv_on;		/* Assertion time */
+	u16 adv_rd_off;		/* Read deassertion time */
+	u16 adv_wr_off;		/* Write deassertion time */
+
+	/* WE signals timings corresponding to GPMC_CONFIG4 */
+	u16 we_on;		/* WE assertion time */
+	u16 we_off;		/* WE deassertion time */
+
+	/* OE signals timings corresponding to GPMC_CONFIG4 */
+	u16 oe_on;		/* OE assertion time */
+	u16 oe_off;		/* OE deassertion time */
+
+	/* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
+	u16 page_burst_access;	/* Multiple access word delay */
+	u16 access;		/* Start-cycle to first data valid delay */
+	u16 rd_cycle;		/* Total read cycle time */
+	u16 wr_cycle;		/* Total write cycle time */
+};
+
+extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
+extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
+extern unsigned long gpmc_get_fclk_period(void);
+
+extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
+extern u32 gpmc_cs_read_reg(int cs, int idx);
+extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
+extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
+extern void gpmc_cs_free(int cs);
+extern int gpmc_cs_set_reserved(int cs, int reserved);
+extern int gpmc_cs_reserved(int cs);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
new file mode 100644
index 000000000000..07f5d7f21528
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -0,0 +1,355 @@
+/*
+ * arch/arm/plat-omap/include/mach/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ *	 file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
+
+#include <asm/sizes.h>
+#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <mach/cpu.h>
+#endif
+#include <mach/serial.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ *	 files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER2_BASE	(0xfffec600)
+#define OMAP_MPU_TIMER3_BASE	(0xfffec700)
+#define MPU_TIMER_FREE		(1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE	(1 << 5)
+#define MPU_TIMER_AR		(1 << 1)
+#define MPU_TIMER_ST		(1 << 0)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE		(0xfffece00)
+#define ARM_CKCTL		(CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1		(CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2		(CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT		(CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1		(CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2		(CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST		(CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3		(CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF		1
+#define CK_IDLEF		2
+#define CK_ENABLEF		4
+#define CK_SELECTF		8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL		(0xfffecf00)
+
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
+#define DSP_CONFIG_REG_BASE     (0xe1008000)
+#define DSP_CKCTL		(DSP_CONFIG_REG_BASE + 0x0)
+#define DSP_IDLECT1		(DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2		(DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2		(DSP_CONFIG_REG_BASE + 0x14)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE		(0xfffe0800)
+#define ULPD_IT_STATUS		(ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3	(ULPD_REG_BASE + 0x24)
+#define ULPD_CLOCK_CTRL		(ULPD_REG_BASE + 0x30)
+#	define DIS_USB_PVCI_CLK		(1 << 5)	/* no USB/FAC synch */
+#	define USB_MCLK_EN		(1 << 4)	/* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ		(ULPD_REG_BASE + 0x34)
+#	define SOFT_UDC_REQ		(1 << 4)
+#	define SOFT_USB_CLK_REQ		(1 << 3)
+#	define SOFT_DPLL_REQ		(1 << 0)
+#define ULPD_DPLL_CTRL		(ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ		(ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL		(ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL		(ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG	(ULPD_REG_BASE + 0x68)
+#	define DIS_MMC2_DPLL_REQ	(1 << 11)
+#	define DIS_MMC1_DPLL_REQ	(1 << 10)
+#	define DIS_UART3_DPLL_REQ	(1 << 9)
+#	define DIS_UART2_DPLL_REQ	(1 << 8)
+#	define DIS_UART1_DPLL_REQ	(1 << 7)
+#	define DIS_USB_HOST_DPLL_REQ	(1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL	(ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL	(ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE	(0xfffec800)
+#define OMAP_WDT_TIMER		(OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM	(OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE	(OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
+#define OMAP_IH1_BASE		0xfffecb00
+#define OMAP_IH2_BASE		0xfffe0000
+
+#define OMAP_IH1_ITR		(OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR		(OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ	(OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ	(OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL	(OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0		(OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR		(OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR		(OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR		(OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ	(OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ	(OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL	(OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0		(OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR		(OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET	0x00
+#define IRQ_MIR_REG_OFFSET	0x04
+#define IRQ_SIR_IRQ_REG_OFFSET	0x10
+#define IRQ_SIR_FIQ_REG_OFFSET	0x14
+#define IRQ_CONTROL_REG_OFFSET	0x18
+#define IRQ_ISR_REG_OFFSET	0x9c
+#define IRQ_ILR0_REG_OFFSET	0x1c
+#define IRQ_GMR_REG_OFFSET	0xa0
+
+#endif
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0		0xfffe1080
+#define MOD_CONF_CTRL_1		0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0		0xfffe1000
+#define FUNC_MUX_CTRL_1		0xfffe1004
+#define FUNC_MUX_CTRL_2		0xfffe1008
+#define COMP_MODE_CTRL_0	0xfffe100c
+#define FUNC_MUX_CTRL_3		0xfffe1010
+#define FUNC_MUX_CTRL_4		0xfffe1014
+#define FUNC_MUX_CTRL_5		0xfffe1018
+#define FUNC_MUX_CTRL_6		0xfffe101C
+#define FUNC_MUX_CTRL_7		0xfffe1020
+#define FUNC_MUX_CTRL_8		0xfffe1024
+#define FUNC_MUX_CTRL_9		0xfffe1028
+#define FUNC_MUX_CTRL_A		0xfffe102C
+#define FUNC_MUX_CTRL_B		0xfffe1030
+#define FUNC_MUX_CTRL_C		0xfffe1034
+#define FUNC_MUX_CTRL_D		0xfffe1038
+#define PULL_DWN_CTRL_0		0xfffe1040
+#define PULL_DWN_CTRL_1		0xfffe1044
+#define PULL_DWN_CTRL_2		0xfffe1048
+#define PULL_DWN_CTRL_3		0xfffe104c
+#define PULL_DWN_CTRL_4		0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E		0xfffe1090
+#define FUNC_MUX_CTRL_F		0xfffe1094
+#define FUNC_MUX_CTRL_10	0xfffe1098
+#define FUNC_MUX_CTRL_11	0xfffe109c
+#define FUNC_MUX_CTRL_12	0xfffe10a0
+#define PU_PD_SEL_0		0xfffe10b4
+#define PU_PD_SEL_1		0xfffe10b8
+#define PU_PD_SEL_2		0xfffe10bc
+#define PU_PD_SEL_3		0xfffe10c0
+#define PU_PD_SEL_4		0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE	0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE		0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL		(TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE		0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL		(TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE			(0xfffec900)
+#define MPUI_CTRL			(MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR			(MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA			(MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG			(MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG			(MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS			(MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG		(MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG		(MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE			0xfffbd000
+#define OMAP_LPG2_BASE			0xfffbd800
+#define OMAP_LPG1_LCR			(OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR			(OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR			(OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR			(OMAP_LPG2_BASE + 0x04)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_PWL_BASE			0xfffb5800
+#define OMAP_PWL_ENABLE			(OMAP_PWL_BASE + 0x00)
+#define OMAP_PWL_CLK_ENABLE		(OMAP_PWL_BASE + 0x04)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#include "omap730.h"
+#include "omap1510.h"
+#include "omap24xx.h"
+#include "omap16xx.h"
+#include "omap34xx.h"
+
+#ifndef __ASSEMBLER__
+
+/*
+ * ---------------------------------------------------------------------------
+ * Board specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#ifdef CONFIG_MACH_OMAP_INNOVATOR
+#include "board-innovator.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H2
+#include "board-h2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#include "board-perseus2.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_FSAMPLE
+#include "board-fsample.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H3
+#include "board-h3.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_H4
+#include "board-h4.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_2430SDP
+#include "board-2430sdp.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_APOLLON
+#include "board-apollon.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_OSK
+#include "board-osk.h"
+#endif
+
+#ifdef CONFIG_MACH_VOICEBLUE
+#include "board-voiceblue.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMTE
+#include "board-palmte.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMZ71
+#include "board-palmz71.h"
+#endif
+
+#ifdef CONFIG_MACH_OMAP_PALMTT
+#include "board-palmtt.h"
+#endif
+
+#ifdef CONFIG_MACH_SX1
+#include "board-sx1.h"
+#endif
+
+#endif /* !__ASSEMBLER__ */
+
+#endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h
new file mode 100644
index 000000000000..577f492f2d3c
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/hwa742.h
@@ -0,0 +1,12 @@
+#ifndef _HWA742_H
+#define _HWA742_H
+
+struct hwa742_platform_data {
+	void		(*power_up)(struct device *dev);
+	void		(*power_down)(struct device *dev);
+	unsigned long	(*get_clock_rate)(struct device *dev);
+
+	unsigned	te_connected:1;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/mach/io.h
new file mode 100644
index 000000000000..2a30b7d88cde
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/io.h
@@ -0,0 +1,197 @@
+/*
+ * arch/arm/plat-omap/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
+#define __mem_pci(a)		(a)
+
+/*
+ * ----------------------------------------------------------------------------
+ * I/O mapping
+ * ----------------------------------------------------------------------------
+ */
+
+#define PCIO_BASE	0
+
+#if defined(CONFIG_ARCH_OMAP1)
+
+#define IO_PHYS		0xFFFB0000
+#define IO_OFFSET	0x01000000	/* Virtual IO = 0xfefb0000 */
+#define IO_SIZE		0x40000
+#define IO_VIRT		(IO_PHYS - IO_OFFSET)
+#define IO_ADDRESS(pa)	((pa) - IO_OFFSET)
+#define OMAP1_IO_ADDRESS(pa)	((pa) - IO_OFFSET)
+#define io_p2v(pa)	((pa) - IO_OFFSET)
+#define io_v2p(va)	((va) + IO_OFFSET)
+
+#elif defined(CONFIG_ARCH_OMAP2)
+
+/* We map both L3 and L4 on OMAP2 */
+#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */
+#define L3_24XX_VIRT	0xf8000000
+#define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
+#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 */
+#define L4_24XX_VIRT	0xd8000000
+#define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
+
+#ifdef CONFIG_ARCH_OMAP2430
+#define L4_WK_243X_PHYS		L4_WK_243X_BASE		/* 0x49000000 */
+#define L4_WK_243X_VIRT		0xd9000000
+#define L4_WK_243X_SIZE		SZ_1M
+#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE	/* 0x49000000 */
+#define OMAP243X_GPMC_VIRT	0xFE000000
+#define OMAP243X_GPMC_SIZE	SZ_1M
+#define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
+#define OMAP243X_SDRC_VIRT	0xFD000000
+#define OMAP243X_SDRC_SIZE	SZ_1M
+#define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
+#define OMAP243X_SMS_VIRT	0xFC000000
+#define OMAP243X_SMS_SIZE	SZ_1M
+
+#endif
+
+#define IO_OFFSET	0x90000000
+#define IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define io_p2v(pa)	((pa) + IO_OFFSET)	/* Works for L3 and L4 */
+#define io_v2p(va)	((va) - IO_OFFSET)	/* Works for L3 and L4 */
+
+/* DSP */
+#define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
+#define DSP_MEM_24XX_VIRT	0xe0000000
+#define DSP_MEM_24XX_SIZE	0x28000
+#define DSP_IPI_24XX_PHYS	OMAP2420_DSP_IPI_BASE	/* 0x59000000 */
+#define DSP_IPI_24XX_VIRT	0xe1000000
+#define DSP_IPI_24XX_SIZE	SZ_4K
+#define DSP_MMU_24XX_PHYS	OMAP2420_DSP_MMU_BASE	/* 0x5a000000 */
+#define DSP_MMU_24XX_VIRT	0xe2000000
+#define DSP_MMU_24XX_SIZE	SZ_4K
+
+#elif defined(CONFIG_ARCH_OMAP3)
+
+/* We map both L3 and L4 on OMAP3 */
+#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */
+#define L3_34XX_VIRT		0xf8000000
+#define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
+
+#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 */
+#define L4_34XX_VIRT		0xd8000000
+#define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
+
+/*
+ * Need to look at the Size 4M for L4.
+ * VPOM3430 was not working for Int controller
+ */
+
+#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE /* 0x48300000 */
+#define L4_WK_34XX_VIRT		0xd8300000
+#define L4_WK_34XX_SIZE		SZ_1M
+
+#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE /* 0x49000000 */
+#define L4_PER_34XX_VIRT	0xd9000000
+#define L4_PER_34XX_SIZE	SZ_1M
+
+#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE /* 0x54000000 */
+#define L4_EMU_34XX_VIRT	0xe4000000
+#define L4_EMU_34XX_SIZE	SZ_64M
+
+#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE /* 0x6E000000 */
+#define OMAP34XX_GPMC_VIRT	0xFE000000
+#define OMAP34XX_GPMC_SIZE	SZ_1M
+
+#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE /* 0x6C000000 */
+#define OMAP343X_SMS_VIRT	0xFC000000
+#define OMAP343X_SMS_SIZE	SZ_1M
+
+#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE /* 0x6D000000 */
+#define OMAP343X_SDRC_VIRT	0xFD000000
+#define OMAP343X_SDRC_SIZE	SZ_1M
+
+
+#define IO_OFFSET		0x90000000
+#define IO_ADDRESS(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define OMAP2_IO_ADDRESS(pa)	((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_p2v(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
+
+/* DSP */
+#define DSP_MEM_34XX_PHYS	OMAP34XX_DSP_MEM_BASE	/* 0x58000000 */
+#define DSP_MEM_34XX_VIRT	0xe0000000
+#define DSP_MEM_34XX_SIZE	0x28000
+#define DSP_IPI_34XX_PHYS	OMAP34XX_DSP_IPI_BASE	/* 0x59000000 */
+#define DSP_IPI_34XX_VIRT	0xe1000000
+#define DSP_IPI_34XX_SIZE	SZ_4K
+#define DSP_MMU_34XX_PHYS	OMAP34XX_DSP_MMU_BASE	/* 0x5a000000 */
+#define DSP_MMU_34XX_VIRT	0xe2000000
+#define DSP_MMU_34XX_SIZE	SZ_4K
+
+#endif
+
+#ifndef __ASSEMBLER__
+
+/*
+ * Functions to access the OMAP IO region
+ *
+ * NOTE: - Use omap_read/write[bwl] for physical register addresses
+ *	 - Use __raw_read/write[bwl]() for virtual register addresses
+ *	 - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
+ *	 - DO NOT use hardcoded virtual addresses to allow changing the
+ *	   IO address space again if needed
+ */
+#define omap_readb(a)		(*(volatile unsigned char  *)IO_ADDRESS(a))
+#define omap_readw(a)		(*(volatile unsigned short *)IO_ADDRESS(a))
+#define omap_readl(a)		(*(volatile unsigned int   *)IO_ADDRESS(a))
+
+#define omap_writeb(v,a)	(*(volatile unsigned char  *)IO_ADDRESS(a) = (v))
+#define omap_writew(v,a)	(*(volatile unsigned short *)IO_ADDRESS(a) = (v))
+#define omap_writel(v,a)	(*(volatile unsigned int   *)IO_ADDRESS(a) = (v))
+
+extern void omap1_map_common_io(void);
+extern void omap1_init_common_hw(void);
+
+extern void omap2_map_common_io(void);
+extern void omap2_init_common_hw(void);
+
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/mach/irda.h
new file mode 100644
index 000000000000..8372a00d8e0b
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/irda.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/plat-omap/include/mach/irda.h
+ *
+ *  Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_SEL		1	/* Selects IrDA */
+#define IR_SIRMODE	2
+#define IR_FIRMODE	4
+#define IR_MIRMODE	8
+
+struct omap_irda_config {
+	int transceiver_cap;
+	int (*transceiver_mode)(struct device *dev, int mode);
+	int (*select_irda)(struct device *dev, int state);
+	/* Very specific to the needs of some platforms (h3,h4)
+	 * having calls which can sleep in irda_set_speed.
+	 */
+	struct delayed_work gpio_expa;
+	int rx_channel;
+	int tx_channel;
+	unsigned long dest_start;
+	unsigned long src_start;
+	int tx_trigger;
+	int rx_trigger;
+	int mode;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h
new file mode 100644
index 000000000000..17248bbf3f27
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/irqs.h
@@ -0,0 +1,332 @@
+/*
+ *  arch/arm/plat-omap/include/mach/irqs.h
+ *
+ *  Copyright (C) Greg Lonnon 2001
+ *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ *	 are different.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA		1
+#define INT_FIQ			3
+#define INT_RTDX		6
+#define INT_DSP_MMU_ABORT	7
+#define INT_HOST		8
+#define INT_ABORT		9
+#define INT_BRIDGE_PRIV		13
+#define INT_GPIO_BANK1		14
+#define INT_UART3		15
+#define INT_TIMER3		16
+#define INT_DMA_CH0_6		19
+#define INT_DMA_CH1_7		20
+#define INT_DMA_CH2_8		21
+#define INT_DMA_CH3		22
+#define INT_DMA_CH4		23
+#define INT_DMA_CH5		24
+#define INT_DMA_LCD		25
+#define INT_TIMER1		26
+#define INT_WD_TIMER		27
+#define INT_BRIDGE_PUB		28
+#define INT_TIMER2		30
+#define INT_LCD_CTRL		31
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ	0
+#define INT_1510_RES2		2
+#define INT_1510_SPI_TX		4
+#define INT_1510_SPI_RX		5
+#define INT_1510_DSP_MAILBOX1	10
+#define INT_1510_DSP_MAILBOX2	11
+#define INT_1510_RES12		12
+#define INT_1510_LB_MMU		17
+#define INT_1510_RES18		18
+#define INT_1510_LOCAL_BUS	29
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ	0
+#define INT_1610_IH2_FIQ	2
+#define INT_1610_McBSP2_TX	4
+#define INT_1610_McBSP2_RX	5
+#define INT_1610_DSP_MAILBOX1	10
+#define INT_1610_DSP_MAILBOX2	11
+#define INT_1610_LCD_LINE	12
+#define INT_1610_GPTIMER1	17
+#define INT_1610_GPTIMER2	18
+#define INT_1610_SSR_FIFO_0	29
+
+/*
+ * OMAP-730 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_730_IH2_FIQ		0
+#define INT_730_IH2_IRQ		1
+#define INT_730_USB_NON_ISO	2
+#define INT_730_USB_ISO		3
+#define INT_730_ICR		4
+#define INT_730_EAC		5
+#define INT_730_GPIO_BANK1	6
+#define INT_730_GPIO_BANK2	7
+#define INT_730_GPIO_BANK3	8
+#define INT_730_McBSP2TX	10
+#define INT_730_McBSP2RX	11
+#define INT_730_McBSP2RX_OVF	12
+#define INT_730_LCD_LINE	14
+#define INT_730_GSM_PROTECT	15
+#define INT_730_TIMER3		16
+#define INT_730_GPIO_BANK5	17
+#define INT_730_GPIO_BANK6	18
+#define INT_730_SPGIO_WR	29
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE		32
+
+#define INT_KEYBOARD		(1 + IH2_BASE)
+#define INT_uWireTX		(2 + IH2_BASE)
+#define INT_uWireRX		(3 + IH2_BASE)
+#define INT_I2C			(4 + IH2_BASE)
+#define INT_MPUIO		(5 + IH2_BASE)
+#define INT_USB_HHC_1		(6 + IH2_BASE)
+#define INT_McBSP3TX		(10 + IH2_BASE)
+#define INT_McBSP3RX		(11 + IH2_BASE)
+#define INT_McBSP1TX		(12 + IH2_BASE)
+#define INT_McBSP1RX		(13 + IH2_BASE)
+#define INT_UART1		(14 + IH2_BASE)
+#define INT_UART2		(15 + IH2_BASE)
+#define INT_BT_MCSI1TX		(16 + IH2_BASE)
+#define INT_BT_MCSI1RX		(17 + IH2_BASE)
+#define INT_USB_W2FC		(20 + IH2_BASE)
+#define INT_1WIRE		(21 + IH2_BASE)
+#define INT_OS_TIMER		(22 + IH2_BASE)
+#define INT_MMC			(23 + IH2_BASE)
+#define INT_GAUGE_32K		(24 + IH2_BASE)
+#define INT_RTC_TIMER		(25 + IH2_BASE)
+#define INT_RTC_ALARM		(26 + IH2_BASE)
+#define INT_MEM_STICK		(27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU	(28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO	(31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC		(0 + IH2_BASE)
+#define INT_1610_USB_HHC_2	(7 + IH2_BASE)
+#define INT_1610_USB_OTG	(8 + IH2_BASE)
+#define INT_1610_SoSSI		(9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH	(19 + IH2_BASE)
+#define INT_1610_DSP_MMU	(28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF	(31 + IH2_BASE)
+#define INT_1610_STI		(32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP	(33 + IH2_BASE)
+#define INT_1610_GPTIMER3	(34 + IH2_BASE)
+#define INT_1610_GPTIMER4	(35 + IH2_BASE)
+#define INT_1610_GPTIMER5	(36 + IH2_BASE)
+#define INT_1610_GPTIMER6	(37 + IH2_BASE)
+#define INT_1610_GPTIMER7	(38 + IH2_BASE)
+#define INT_1610_GPTIMER8	(39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2	(40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3	(41 + IH2_BASE)
+#define INT_1610_MMC2		(42 + IH2_BASE)
+#define INT_1610_CF		(43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4	(48 + IH2_BASE)
+#define INT_1610_SPI		(49 + IH2_BASE)
+#define INT_1610_DMA_CH6	(53 + IH2_BASE)
+#define INT_1610_DMA_CH7	(54 + IH2_BASE)
+#define INT_1610_DMA_CH8	(55 + IH2_BASE)
+#define INT_1610_DMA_CH9	(56 + IH2_BASE)
+#define INT_1610_DMA_CH10	(57 + IH2_BASE)
+#define INT_1610_DMA_CH11	(58 + IH2_BASE)
+#define INT_1610_DMA_CH12	(59 + IH2_BASE)
+#define INT_1610_DMA_CH13	(60 + IH2_BASE)
+#define INT_1610_DMA_CH14	(61 + IH2_BASE)
+#define INT_1610_DMA_CH15	(62 + IH2_BASE)
+#define INT_1610_NAND		(63 + IH2_BASE)
+
+/*
+ * OMAP-730 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_730_HW_ERRORS	(0 + IH2_BASE)
+#define INT_730_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_730_CFCD		(2 + IH2_BASE)
+#define INT_730_CFIREQ		(3 + IH2_BASE)
+#define INT_730_I2C		(4 + IH2_BASE)
+#define INT_730_PCC		(5 + IH2_BASE)
+#define INT_730_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_730_SPI_100K_1	(7 + IH2_BASE)
+#define INT_730_SYREN_SPI	(8 + IH2_BASE)
+#define INT_730_VLYNQ		(9 + IH2_BASE)
+#define INT_730_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_730_McBSP1TX	(11 + IH2_BASE)
+#define INT_730_McBSP1RX	(12 + IH2_BASE)
+#define INT_730_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_730_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_730_MCSI		(16 + IH2_BASE)
+#define INT_730_uWireTX		(17 + IH2_BASE)
+#define INT_730_uWireRX		(18 + IH2_BASE)
+#define INT_730_SMC_CD		(19 + IH2_BASE)
+#define INT_730_SMC_IREQ	(20 + IH2_BASE)
+#define INT_730_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_730_TIMER32K	(22 + IH2_BASE)
+#define INT_730_MMC_SDIO	(23 + IH2_BASE)
+#define INT_730_UPLD		(24 + IH2_BASE)
+#define INT_730_USB_HHC_1	(27 + IH2_BASE)
+#define INT_730_USB_HHC_2	(28 + IH2_BASE)
+#define INT_730_USB_GENI	(29 + IH2_BASE)
+#define INT_730_USB_OTG		(30 + IH2_BASE)
+#define INT_730_CAMERA_IF	(31 + IH2_BASE)
+#define INT_730_RNG		(32 + IH2_BASE)
+#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_730_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_730_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_730_SHA1_MD5	(36 + IH2_BASE)
+#define INT_730_SPI_100K_2	(37 + IH2_BASE)
+#define INT_730_RNG_IDLE	(38 + IH2_BASE)
+#define INT_730_MPUIO		(39 + IH2_BASE)
+#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_730_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_730_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_730_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_730_DMA_CH6		(53 + IH2_BASE)
+#define INT_730_DMA_CH7		(54 + IH2_BASE)
+#define INT_730_DMA_CH8		(55 + IH2_BASE)
+#define INT_730_DMA_CH9		(56 + IH2_BASE)
+#define INT_730_DMA_CH10	(57 + IH2_BASE)
+#define INT_730_DMA_CH11	(58 + IH2_BASE)
+#define INT_730_DMA_CH12	(59 + IH2_BASE)
+#define INT_730_DMA_CH13	(60 + IH2_BASE)
+#define INT_730_DMA_CH14	(61 + IH2_BASE)
+#define INT_730_DMA_CH15	(62 + IH2_BASE)
+#define INT_730_NAND		(63 + IH2_BASE)
+
+#define INT_24XX_SYS_NIRQ	7
+#define INT_24XX_SDMA_IRQ0	12
+#define INT_24XX_SDMA_IRQ1	13
+#define INT_24XX_SDMA_IRQ2	14
+#define INT_24XX_SDMA_IRQ3	15
+#define INT_24XX_CAM_IRQ	24
+#define INT_24XX_DSS_IRQ	25
+#define INT_24XX_MAIL_U0_MPU	26
+#define INT_24XX_DSP_UMA	27
+#define INT_24XX_DSP_MMU	28
+#define INT_24XX_GPIO_BANK1	29
+#define INT_24XX_GPIO_BANK2	30
+#define INT_24XX_GPIO_BANK3	31
+#define INT_24XX_GPIO_BANK4	32
+#define INT_24XX_GPIO_BANK5	33
+#define INT_24XX_MAIL_U3_MPU	34
+#define INT_24XX_GPTIMER1	37
+#define INT_24XX_GPTIMER2	38
+#define INT_24XX_GPTIMER3	39
+#define INT_24XX_GPTIMER4	40
+#define INT_24XX_GPTIMER5	41
+#define INT_24XX_GPTIMER6	42
+#define INT_24XX_GPTIMER7	43
+#define INT_24XX_GPTIMER8	44
+#define INT_24XX_GPTIMER9	45
+#define INT_24XX_GPTIMER10	46
+#define INT_24XX_GPTIMER11	47
+#define INT_24XX_GPTIMER12	48
+#define INT_24XX_I2C1_IRQ	56
+#define INT_24XX_I2C2_IRQ	57
+#define INT_24XX_MCBSP1_IRQ_TX	59
+#define INT_24XX_MCBSP1_IRQ_RX	60
+#define INT_24XX_MCBSP2_IRQ_TX	62
+#define INT_24XX_MCBSP2_IRQ_RX	63
+#define INT_24XX_UART1_IRQ	72
+#define INT_24XX_UART2_IRQ	73
+#define INT_24XX_UART3_IRQ	74
+#define INT_24XX_USB_IRQ_GEN	75
+#define INT_24XX_USB_IRQ_NISO	76
+#define INT_24XX_USB_IRQ_ISO	77
+#define INT_24XX_USB_IRQ_HGEN	78
+#define INT_24XX_USB_IRQ_HSOF	79
+#define INT_24XX_USB_IRQ_OTG	80
+#define INT_24XX_MMC_IRQ	83
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES	192
+#define IH_GPIO_BASE		(128 + IH2_BASE)
+#define IH_MPUIO_BASE		(OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END		(IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define	OMAP_FPGA_IRQ_BASE	(OMAP_IRQ_END)
+#ifdef	CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS	24
+#else
+#define OMAP_FPGA_NR_IRQS	0
+#endif
+#define OMAP_FPGA_IRQ_END	(OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
+#define	TWL4030_IRQ_BASE	(OMAP_FPGA_IRQ_END)
+#ifdef	CONFIG_TWL4030_CORE
+#define	TWL4030_BASE_NR_IRQS	8
+#define	TWL4030_PWR_NR_IRQS	8
+#else
+#define	TWL4030_BASE_NR_IRQS	0
+#define	TWL4030_PWR_NR_IRQS	0
+#endif
+#define TWL4030_IRQ_END		(TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
+#define TWL4030_PWR_IRQ_BASE	TWL4030_IRQ_END
+#define	TWL4030_PWR_IRQ_END	(TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
+
+/* External TWL4030 gpio interrupts are optional */
+#define TWL4030_GPIO_IRQ_BASE	TWL4030_PWR_IRQ_END
+#ifdef	CONFIG_TWL4030_GPIO
+#define TWL4030_GPIO_NR_IRQS	18
+#else
+#define	TWL4030_GPIO_NR_IRQS	0
+#endif
+#define TWL4030_GPIO_IRQ_END	(TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
+
+/* Total number of interrupts depends on the enabled blocks above */
+#define NR_IRQS			TWL4030_GPIO_IRQ_END
+
+#define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
+
+#ifndef __ASSEMBLY__
+extern void omap_init_irq(void);
+#endif
+
+#include <mach/hardware.h>
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
new file mode 100644
index 000000000000..232923aaf61d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -0,0 +1,39 @@
+/*
+ *  arch/arm/plat-omap/include/mach/keypad.h
+ *
+ *  Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_KEYPAD_H
+#define ASMARM_ARCH_KEYPAD_H
+
+struct omap_kp_platform_data {
+	int rows;
+	int cols;
+	int *keymap;
+	unsigned int keymapsize;
+	unsigned int rep:1;
+	unsigned long delay;
+	unsigned int dbounce:1;
+	/* specific to OMAP242x*/
+	unsigned int *row_gpios;
+	unsigned int *col_gpios;
+};
+
+/* Group (0..3) -- when multiple keys are pressed, only the
+ * keys pressed in the same group are considered as pressed. This is
+ * in order to workaround certain crappy HW designs that produce ghost
+ * keypresses. */
+#define GROUP_0		(0 << 16)
+#define GROUP_1		(1 << 16)
+#define GROUP_2		(2 << 16)
+#define GROUP_3		(3 << 16)
+#define GROUP_MASK	GROUP_3
+
+#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/mach/lcd_mipid.h b/arch/arm/plat-omap/include/mach/lcd_mipid.h
new file mode 100644
index 000000000000..f8fbc4801e52
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/lcd_mipid.h
@@ -0,0 +1,24 @@
+#ifndef __LCD_MIPID_H
+#define __LCD_MIPID_H
+
+enum mipid_test_num {
+	MIPID_TEST_RGB_LINES,
+};
+
+enum mipid_test_result {
+	MIPID_TEST_SUCCESS,
+	MIPID_TEST_INVALID,
+	MIPID_TEST_FAILED,
+};
+
+#ifdef __KERNEL__
+
+struct mipid_platform_data {
+	int	nreset_gpio;
+	int	data_lines;
+	void	(*shutdown)(struct mipid_platform_data *pdata);
+};
+
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/led.h b/arch/arm/plat-omap/include/mach/led.h
new file mode 100644
index 000000000000..25e451e7e2fd
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/led.h
@@ -0,0 +1,24 @@
+/*
+ *  arch/arm/plat-omap/include/mach/led.h
+ *
+ *  Copyright (C) 2006 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_LED_H
+#define ASMARM_ARCH_LED_H
+
+struct omap_led_config {
+	struct led_classdev	cdev;
+	s16			gpio;
+};
+
+struct omap_led_platform_data {
+	s16			nr_leds;
+	struct omap_led_config	*leds;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mailbox.h b/arch/arm/plat-omap/include/mach/mailbox.h
new file mode 100644
index 000000000000..7cbed9332e16
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mailbox.h
@@ -0,0 +1,73 @@
+/* mailbox.h */
+
+#ifndef MAILBOX_H
+#define MAILBOX_H
+
+#include <linux/wait.h>
+#include <linux/workqueue.h>
+#include <linux/blkdev.h>
+
+typedef u32 mbox_msg_t;
+typedef void (mbox_receiver_t)(mbox_msg_t msg);
+struct omap_mbox;
+
+typedef int __bitwise omap_mbox_irq_t;
+#define IRQ_TX ((__force omap_mbox_irq_t) 1)
+#define IRQ_RX ((__force omap_mbox_irq_t) 2)
+
+typedef int __bitwise omap_mbox_type_t;
+#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1)
+#define OMAP_MBOX_TYPE2 ((__force omap_mbox_type_t) 2)
+
+struct omap_mbox_ops {
+	omap_mbox_type_t	type;
+	int		(*startup)(struct omap_mbox *mbox);
+	void		(*shutdown)(struct omap_mbox *mbox);
+	/* fifo */
+	mbox_msg_t	(*fifo_read)(struct omap_mbox *mbox);
+	void		(*fifo_write)(struct omap_mbox *mbox, mbox_msg_t msg);
+	int		(*fifo_empty)(struct omap_mbox *mbox);
+	int		(*fifo_full)(struct omap_mbox *mbox);
+	/* irq */
+	void		(*enable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+	void		(*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+	void		(*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+	int		(*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+};
+
+struct omap_mbox_queue {
+	spinlock_t		lock;
+	struct request_queue	*queue;
+	struct work_struct	work;
+	int	(*callback)(void *);
+	struct omap_mbox	*mbox;
+};
+
+struct omap_mbox {
+	char			*name;
+	unsigned int		irq;
+
+	struct omap_mbox_queue	*txq, *rxq;
+
+	struct omap_mbox_ops	*ops;
+
+	mbox_msg_t		seq_snd, seq_rcv;
+
+	struct device		dev;
+
+	struct omap_mbox	*next;
+	void			*priv;
+
+	void			(*err_notify)(void);
+};
+
+int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg, void *);
+void omap_mbox_init_seq(struct omap_mbox *);
+
+struct omap_mbox *omap_mbox_get(const char *);
+void omap_mbox_put(struct omap_mbox *);
+
+int omap_mbox_register(struct omap_mbox *);
+int omap_mbox_unregister(struct omap_mbox *);
+
+#endif /* MAILBOX_H */
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h
new file mode 100644
index 000000000000..6eb44a92871d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mcbsp.h
@@ -0,0 +1,380 @@
+/*
+ * arch/arm/plat-omap/include/mach/mcbsp.h
+ *
+ * Defines for Multi-Channel Buffered Serial Port
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_OMAP_MCBSP_H
+#define __ASM_ARCH_OMAP_MCBSP_H
+
+#include <linux/completion.h>
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
+#include <mach/clock.h>
+
+#define OMAP730_MCBSP1_BASE	0xfffb1000
+#define OMAP730_MCBSP2_BASE	0xfffb1800
+
+#define OMAP1510_MCBSP1_BASE	0xe1011800
+#define OMAP1510_MCBSP2_BASE	0xfffb1000
+#define OMAP1510_MCBSP3_BASE	0xe1017000
+
+#define OMAP1610_MCBSP1_BASE	0xe1011800
+#define OMAP1610_MCBSP2_BASE	0xfffb1000
+#define OMAP1610_MCBSP3_BASE	0xe1017000
+
+#define OMAP24XX_MCBSP1_BASE	0x48074000
+#define OMAP24XX_MCBSP2_BASE	0x48076000
+
+#define OMAP34XX_MCBSP1_BASE	0x48074000
+#define OMAP34XX_MCBSP2_BASE	0x49022000
+
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
+
+#define OMAP_MCBSP_REG_DRR2	0x00
+#define OMAP_MCBSP_REG_DRR1	0x02
+#define OMAP_MCBSP_REG_DXR2	0x04
+#define OMAP_MCBSP_REG_DXR1	0x06
+#define OMAP_MCBSP_REG_SPCR2	0x08
+#define OMAP_MCBSP_REG_SPCR1	0x0a
+#define OMAP_MCBSP_REG_RCR2	0x0c
+#define OMAP_MCBSP_REG_RCR1	0x0e
+#define OMAP_MCBSP_REG_XCR2	0x10
+#define OMAP_MCBSP_REG_XCR1	0x12
+#define OMAP_MCBSP_REG_SRGR2	0x14
+#define OMAP_MCBSP_REG_SRGR1	0x16
+#define OMAP_MCBSP_REG_MCR2	0x18
+#define OMAP_MCBSP_REG_MCR1	0x1a
+#define OMAP_MCBSP_REG_RCERA	0x1c
+#define OMAP_MCBSP_REG_RCERB	0x1e
+#define OMAP_MCBSP_REG_XCERA	0x20
+#define OMAP_MCBSP_REG_XCERB	0x22
+#define OMAP_MCBSP_REG_PCR0	0x24
+#define OMAP_MCBSP_REG_RCERC	0x26
+#define OMAP_MCBSP_REG_RCERD	0x28
+#define OMAP_MCBSP_REG_XCERC	0x2A
+#define OMAP_MCBSP_REG_XCERD	0x2C
+#define OMAP_MCBSP_REG_RCERE	0x2E
+#define OMAP_MCBSP_REG_RCERF	0x30
+#define OMAP_MCBSP_REG_XCERE	0x32
+#define OMAP_MCBSP_REG_XCERF	0x34
+#define OMAP_MCBSP_REG_RCERG	0x36
+#define OMAP_MCBSP_REG_RCERH	0x38
+#define OMAP_MCBSP_REG_XCERG	0x3A
+#define OMAP_MCBSP_REG_XCERH	0x3C
+
+#define OMAP_MAX_MCBSP_COUNT	3
+#define MAX_MCBSP_CLOCKS	3
+
+#define AUDIO_MCBSP_DATAWRITE	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1)
+#define AUDIO_MCBSP_DATAREAD	(OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1)
+
+#define AUDIO_MCBSP		OMAP_MCBSP1
+#define AUDIO_DMA_TX		OMAP_DMA_MCBSP1_TX
+#define AUDIO_DMA_RX		OMAP_DMA_MCBSP1_RX
+
+#elif defined(CONFIG_ARCH_OMAP24XX)
+
+#define OMAP_MCBSP_REG_DRR2	0x00
+#define OMAP_MCBSP_REG_DRR1	0x04
+#define OMAP_MCBSP_REG_DXR2	0x08
+#define OMAP_MCBSP_REG_DXR1	0x0C
+#define OMAP_MCBSP_REG_SPCR2	0x10
+#define OMAP_MCBSP_REG_SPCR1	0x14
+#define OMAP_MCBSP_REG_RCR2	0x18
+#define OMAP_MCBSP_REG_RCR1	0x1C
+#define OMAP_MCBSP_REG_XCR2	0x20
+#define OMAP_MCBSP_REG_XCR1	0x24
+#define OMAP_MCBSP_REG_SRGR2	0x28
+#define OMAP_MCBSP_REG_SRGR1	0x2C
+#define OMAP_MCBSP_REG_MCR2	0x30
+#define OMAP_MCBSP_REG_MCR1	0x34
+#define OMAP_MCBSP_REG_RCERA	0x38
+#define OMAP_MCBSP_REG_RCERB	0x3C
+#define OMAP_MCBSP_REG_XCERA	0x40
+#define OMAP_MCBSP_REG_XCERB	0x44
+#define OMAP_MCBSP_REG_PCR0	0x48
+#define OMAP_MCBSP_REG_RCERC	0x4C
+#define OMAP_MCBSP_REG_RCERD	0x50
+#define OMAP_MCBSP_REG_XCERC	0x54
+#define OMAP_MCBSP_REG_XCERD	0x58
+#define OMAP_MCBSP_REG_RCERE	0x5C
+#define OMAP_MCBSP_REG_RCERF	0x60
+#define OMAP_MCBSP_REG_XCERE	0x64
+#define OMAP_MCBSP_REG_XCERF	0x68
+#define OMAP_MCBSP_REG_RCERG	0x6C
+#define OMAP_MCBSP_REG_RCERH	0x70
+#define OMAP_MCBSP_REG_XCERG	0x74
+#define OMAP_MCBSP_REG_XCERH	0x78
+
+#define OMAP_MAX_MCBSP_COUNT	2
+#define MAX_MCBSP_CLOCKS	2
+
+#define AUDIO_MCBSP_DATAWRITE	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
+#define AUDIO_MCBSP_DATAREAD	(OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
+
+#define AUDIO_MCBSP		OMAP_MCBSP2
+#define AUDIO_DMA_TX		OMAP24XX_DMA_MCBSP2_TX
+#define AUDIO_DMA_RX		OMAP24XX_DMA_MCBSP2_RX
+
+#endif
+
+#define OMAP_MCBSP_READ(base, reg)		__raw_readw((base) + OMAP_MCBSP_REG_##reg)
+#define OMAP_MCBSP_WRITE(base, reg, val)	__raw_writew((val), (base) + OMAP_MCBSP_REG_##reg)
+
+
+/************************** McBSP SPCR1 bit definitions ***********************/
+#define RRST			0x0001
+#define RRDY			0x0002
+#define RFULL			0x0004
+#define RSYNC_ERR		0x0008
+#define RINTM(value)		((value)<<4)	/* bits 4:5 */
+#define ABIS			0x0040
+#define DXENA			0x0080
+#define CLKSTP(value)		((value)<<11)	/* bits 11:12 */
+#define RJUST(value)		((value)<<13)	/* bits 13:14 */
+#define DLB			0x8000
+
+/************************** McBSP SPCR2 bit definitions ***********************/
+#define XRST		0x0001
+#define XRDY		0x0002
+#define XEMPTY		0x0004
+#define XSYNC_ERR	0x0008
+#define XINTM(value)	((value)<<4)		/* bits 4:5 */
+#define GRST		0x0040
+#define FRST		0x0080
+#define SOFT		0x0100
+#define FREE		0x0200
+
+/************************** McBSP PCR bit definitions *************************/
+#define CLKRP		0x0001
+#define CLKXP		0x0002
+#define FSRP		0x0004
+#define FSXP		0x0008
+#define DR_STAT		0x0010
+#define DX_STAT		0x0020
+#define CLKS_STAT	0x0040
+#define SCLKME		0x0080
+#define CLKRM		0x0100
+#define CLKXM		0x0200
+#define FSRM		0x0400
+#define FSXM		0x0800
+#define RIOEN		0x1000
+#define XIOEN		0x2000
+#define IDLE_EN		0x4000
+
+/************************** McBSP RCR1 bit definitions ************************/
+#define RWDLEN1(value)		((value)<<5)	/* Bits 5:7 */
+#define RFRLEN1(value)		((value)<<8)	/* Bits 8:14 */
+
+/************************** McBSP XCR1 bit definitions ************************/
+#define XWDLEN1(value)		((value)<<5)	/* Bits 5:7 */
+#define XFRLEN1(value)		((value)<<8)	/* Bits 8:14 */
+
+/*************************** McBSP RCR2 bit definitions ***********************/
+#define RDATDLY(value)		(value)		/* Bits 0:1 */
+#define RFIG			0x0004
+#define RCOMPAND(value)		((value)<<3)	/* Bits 3:4 */
+#define RWDLEN2(value)		((value)<<5)	/* Bits 5:7 */
+#define RFRLEN2(value)		((value)<<8)	/* Bits 8:14 */
+#define RPHASE			0x8000
+
+/*************************** McBSP XCR2 bit definitions ***********************/
+#define XDATDLY(value)		(value)		/* Bits 0:1 */
+#define XFIG			0x0004
+#define XCOMPAND(value)		((value)<<3)	/* Bits 3:4 */
+#define XWDLEN2(value)		((value)<<5)	/* Bits 5:7 */
+#define XFRLEN2(value)		((value)<<8)	/* Bits 8:14 */
+#define XPHASE			0x8000
+
+/************************* McBSP SRGR1 bit definitions ************************/
+#define CLKGDV(value)		(value)		/* Bits 0:7 */
+#define FWID(value)		((value)<<8)	/* Bits 8:15 */
+
+/************************* McBSP SRGR2 bit definitions ************************/
+#define FPER(value)		(value)		/* Bits 0:11 */
+#define FSGM			0x1000
+#define CLKSM			0x2000
+#define CLKSP			0x4000
+#define GSYNC			0x8000
+
+/************************* McBSP MCR1 bit definitions *************************/
+#define RMCM			0x0001
+#define RCBLK(value)		((value)<<2)	/* Bits 2:4 */
+#define RPABLK(value)		((value)<<5)	/* Bits 5:6 */
+#define RPBBLK(value)		((value)<<7)	/* Bits 7:8 */
+
+/************************* McBSP MCR2 bit definitions *************************/
+#define XMCM(value)		(value)		/* Bits 0:1 */
+#define XCBLK(value)		((value)<<2)	/* Bits 2:4 */
+#define XPABLK(value)		((value)<<5)	/* Bits 5:6 */
+#define XPBBLK(value)		((value)<<7)	/* Bits 7:8 */
+
+
+/* we don't do multichannel for now */
+struct omap_mcbsp_reg_cfg {
+	u16 spcr2;
+	u16 spcr1;
+	u16 rcr2;
+	u16 rcr1;
+	u16 xcr2;
+	u16 xcr1;
+	u16 srgr2;
+	u16 srgr1;
+	u16 mcr2;
+	u16 mcr1;
+	u16 pcr0;
+	u16 rcerc;
+	u16 rcerd;
+	u16 xcerc;
+	u16 xcerd;
+	u16 rcere;
+	u16 rcerf;
+	u16 xcere;
+	u16 xcerf;
+	u16 rcerg;
+	u16 rcerh;
+	u16 xcerg;
+	u16 xcerh;
+};
+
+typedef enum {
+	OMAP_MCBSP1 = 0,
+	OMAP_MCBSP2,
+	OMAP_MCBSP3,
+} omap_mcbsp_id;
+
+typedef int __bitwise omap_mcbsp_io_type_t;
+#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1)
+#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2)
+
+typedef enum {
+	OMAP_MCBSP_WORD_8 = 0,
+	OMAP_MCBSP_WORD_12,
+	OMAP_MCBSP_WORD_16,
+	OMAP_MCBSP_WORD_20,
+	OMAP_MCBSP_WORD_24,
+	OMAP_MCBSP_WORD_32,
+} omap_mcbsp_word_length;
+
+typedef enum {
+	OMAP_MCBSP_CLK_RISING = 0,
+	OMAP_MCBSP_CLK_FALLING,
+} omap_mcbsp_clk_polarity;
+
+typedef enum {
+	OMAP_MCBSP_FS_ACTIVE_HIGH = 0,
+	OMAP_MCBSP_FS_ACTIVE_LOW,
+} omap_mcbsp_fs_polarity;
+
+typedef enum {
+	OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0,
+	OMAP_MCBSP_CLK_STP_MODE_DELAY,
+} omap_mcbsp_clk_stp_mode;
+
+
+/******* SPI specific mode **********/
+typedef enum {
+	OMAP_MCBSP_SPI_MASTER = 0,
+	OMAP_MCBSP_SPI_SLAVE,
+} omap_mcbsp_spi_mode;
+
+struct omap_mcbsp_spi_cfg {
+	omap_mcbsp_spi_mode		spi_mode;
+	omap_mcbsp_clk_polarity		rx_clock_polarity;
+	omap_mcbsp_clk_polarity		tx_clock_polarity;
+	omap_mcbsp_fs_polarity		fsx_polarity;
+	u8				clk_div;
+	omap_mcbsp_clk_stp_mode		clk_stp_mode;
+	omap_mcbsp_word_length		word_length;
+};
+
+/* Platform specific configuration */
+struct omap_mcbsp_ops {
+	void (*request)(unsigned int);
+	void (*free)(unsigned int);
+	int (*check)(unsigned int);
+};
+
+struct omap_mcbsp_platform_data {
+	u32 virt_base;
+	u8 dma_rx_sync, dma_tx_sync;
+	u16 rx_irq, tx_irq;
+	struct omap_mcbsp_ops *ops;
+	char const *clk_name;
+};
+
+struct omap_mcbsp {
+	struct device *dev;
+	u32 io_base;
+	u8 id;
+	u8 free;
+	omap_mcbsp_word_length rx_word_length;
+	omap_mcbsp_word_length tx_word_length;
+
+	omap_mcbsp_io_type_t io_type; /* IRQ or poll */
+	/* IRQ based TX/RX */
+	int rx_irq;
+	int tx_irq;
+
+	/* DMA stuff */
+	u8 dma_rx_sync;
+	short dma_rx_lch;
+	u8 dma_tx_sync;
+	short dma_tx_lch;
+
+	/* Completion queues */
+	struct completion tx_irq_completion;
+	struct completion rx_irq_completion;
+	struct completion tx_dma_completion;
+	struct completion rx_dma_completion;
+
+	/* Protect the field .free, while checking if the mcbsp is in use */
+	spinlock_t lock;
+	struct omap_mcbsp_platform_data *pdata;
+	struct clk *clk;
+};
+
+int omap_mcbsp_init(void);
+void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config,
+					int size);
+void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
+int omap_mcbsp_request(unsigned int id);
+void omap_mcbsp_free(unsigned int id);
+void omap_mcbsp_start(unsigned int id);
+void omap_mcbsp_stop(unsigned int id);
+void omap_mcbsp_xmit_word(unsigned int id, u32 word);
+u32 omap_mcbsp_recv_word(unsigned int id);
+
+int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
+int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length);
+int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word);
+int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word);
+
+
+/* SPI specific API */
+void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg);
+
+/* Polled read/write functions */
+int omap_mcbsp_pollread(unsigned int id, u16 * buf);
+int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mcspi.h b/arch/arm/plat-omap/include/mach/mcspi.h
new file mode 100644
index 000000000000..1254e4945b6f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mcspi.h
@@ -0,0 +1,15 @@
+#ifndef _OMAP2_MCSPI_H
+#define _OMAP2_MCSPI_H
+
+struct omap2_mcspi_platform_config {
+	unsigned short	num_cs;
+};
+
+struct omap2_mcspi_device_config {
+	unsigned turbo_mode:1;
+
+	/* Do we want one channel enabled at the same time? */
+	unsigned single_channel:1;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h
new file mode 100644
index 000000000000..037486c5f4a4
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/memory.h
@@ -0,0 +1,103 @@
+/*
+ * arch/arm/plat-omap/include/mach/memory.h
+ *
+ * Memory map for OMAP-1510 and 1610
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#if defined(CONFIG_ARCH_OMAP1)
+#define PHYS_OFFSET		UL(0x10000000)
+#elif defined(CONFIG_ARCH_OMAP2)
+#define PHYS_OFFSET		UL(0x80000000)
+#endif
+
+/*
+ * Conversion between SDRAM and fake PCI bus, used by USB
+ * NOTE: Physical address must be converted to Local Bus address
+ *	 on OMAP-1510 only
+ */
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ */
+#define __virt_to_bus(x)	__virt_to_phys(x)
+#define __bus_to_virt(x)	__phys_to_virt(x)
+
+/*
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus. We do the address translation based on the
+ * device overriding the defaults used in the dma-mapping API.
+ * Note that the is_lbus_device() test is not very efficient on 1510
+ * because of the strncmp().
+ */
+#ifdef CONFIG_ARCH_OMAP15XX
+
+/*
+ * OMAP-1510 Local Bus address offset
+ */
+#define OMAP1510_LB_OFFSET	UL(0x30000000)
+
+#define virt_to_lbus(x)		((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
+#define lbus_to_virt(x)		((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
+#define is_lbus_device(dev)	(cpu_is_omap15xx() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))
+
+#define __arch_page_to_dma(dev, page)	({is_lbus_device(dev) ? \
+					(dma_addr_t)virt_to_lbus(page_address(page)) : \
+					(dma_addr_t)__virt_to_bus(page_address(page));})
+
+#define __arch_dma_to_virt(dev, addr)	({is_lbus_device(dev) ? \
+					lbus_to_virt(addr) : \
+					__bus_to_virt(addr);})
+
+#define __arch_virt_to_dma(dev, addr)	({is_lbus_device(dev) ? \
+					virt_to_lbus(addr) : \
+					__virt_to_bus(addr);})
+
+#endif	/* CONFIG_ARCH_OMAP15XX */
+
+/* Override the ARM default */
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+
+#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
+#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
+#endif
+
+#define CONSISTENT_DMA_SIZE \
+	(((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
+
+#endif
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/mach/menelaus.h b/arch/arm/plat-omap/include/mach/menelaus.h
new file mode 100644
index 000000000000..3122bf68c7ce
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/menelaus.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/plat-omap/include/mach/menelaus.h
+ *
+ * Functions to access Menelaus power management chip
+ */
+
+#ifndef __ASM_ARCH_MENELAUS_H
+#define __ASM_ARCH_MENELAUS_H
+
+struct device;
+
+struct menelaus_platform_data {
+	int (* late_init)(struct device *dev);
+};
+
+extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
+					  void *data);
+extern void menelaus_unregister_mmc_callback(void);
+extern int menelaus_set_mmc_opendrain(int slot, int enable);
+extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on);
+
+extern int menelaus_set_vmem(unsigned int mV);
+extern int menelaus_set_vio(unsigned int mV);
+extern int menelaus_set_vmmc(unsigned int mV);
+extern int menelaus_set_vaux(unsigned int mV);
+extern int menelaus_set_vdcdc(int dcdc, unsigned int mV);
+extern int menelaus_set_slot_sel(int enable);
+extern int menelaus_get_slot_pin_states(void);
+extern int menelaus_set_vcore_sw(unsigned int mV);
+extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
+
+#define EN_VPLL_SLEEP	(1 << 7)
+#define EN_VMMC_SLEEP	(1 << 6)
+#define EN_VAUX_SLEEP	(1 << 5)
+#define EN_VIO_SLEEP	(1 << 4)
+#define EN_VMEM_SLEEP	(1 << 3)
+#define EN_DC3_SLEEP	(1 << 2)
+#define EN_DC2_SLEEP	(1 << 1)
+#define EN_VC_SLEEP	(1 << 0)
+
+extern int menelaus_set_regulator_sleep(int enable, u32 val);
+
+#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_MENELAUS)
+#define omap_has_menelaus()	1
+#else
+#define omap_has_menelaus()	0
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
new file mode 100644
index 000000000000..fc15d13058fc
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -0,0 +1,74 @@
+/*
+ * MMC definitions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_MMC_H
+#define __OMAP2_MMC_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/board.h>
+
+#define OMAP_MMC_MAX_SLOTS	2
+
+struct omap_mmc_platform_data {
+	struct omap_mmc_conf	conf;
+
+	/* number of slots on board */
+	unsigned nr_slots:2;
+
+	/* set if your board has components or wiring that limits the
+	 * maximum frequency on the MMC bus */
+	unsigned int max_freq;
+
+	/* switch the bus to a new slot */
+	int (* switch_slot)(struct device *dev, int slot);
+	/* initialize board-specific MMC functionality, can be NULL if
+	 * not supported */
+	int (* init)(struct device *dev);
+	void (* cleanup)(struct device *dev);
+	void (* shutdown)(struct device *dev);
+
+	/* To handle board related suspend/resume functionality for MMC */
+	int (*suspend)(struct device *dev, int slot);
+	int (*resume)(struct device *dev, int slot);
+
+	struct omap_mmc_slot_data {
+		int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
+		int (* set_power)(struct device *dev, int slot, int power_on, int vdd);
+		int (* get_ro)(struct device *dev, int slot);
+
+		/* return MMC cover switch state, can be NULL if not supported.
+		 *
+		 * possible return values:
+		 *   0 - open
+		 *   1 - closed
+		 */
+		int (* get_cover_state)(struct device *dev, int slot);
+
+		const char *name;
+		u32 ocr_mask;
+
+		/* Card detection IRQs */
+		int card_detect_irq;
+		int (* card_detect)(int irq);
+
+		unsigned int ban_openended:1;
+
+	} slots[OMAP_MMC_MAX_SLOTS];
+};
+
+extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
+
+/* called from board-specific card detection service routine */
+extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/plat-omap/include/mach/mtd-xip.h
new file mode 100644
index 000000000000..5cee7e16a1b4
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mtd-xip.h
@@ -0,0 +1,61 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions.
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ *
+ * Author: Vladimir Barinov <vbarinov@ru.mvista.com>
+ *
+ * (c) 2005 MontaVista Software, Inc.  This file is licensed under the
+ * terms of the GNU General Public License version 2.  This program is
+ * licensed "as is" without any warranty of any kind, whether express or
+ * implied.
+ */
+
+#ifndef __ARCH_OMAP_MTD_XIP_H__
+#define __ARCH_OMAP_MTD_XIP_H__
+
+#include <mach/hardware.h>
+#define OMAP_MPU_TIMER_BASE	(0xfffec500)
+#define OMAP_MPU_TIMER_OFFSET	0x100
+
+typedef struct {
+	u32 cntl;			/* CNTL_TIMER, R/W */
+	u32 load_tim;			/* LOAD_TIM,   W */
+	u32 read_tim;			/* READ_TIM,   R */
+} xip_omap_mpu_timer_regs_t;
+
+#define xip_omap_mpu_timer_base(n)					\
+((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE +	\
+	(n)*OMAP_MPU_TIMER_OFFSET))
+
+static inline unsigned long xip_omap_mpu_timer_read(int nr)
+{
+	volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr);
+	return timer->read_tim;
+}
+
+#define xip_irqpending()	\
+	(omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR))
+#define xip_currtime()		(~xip_omap_mpu_timer_read(0))
+
+/*
+ * It's permitted to do approxmation for xip_elapsed_since macro
+ * (see linux/mtd/xip.h)
+ */
+
+#ifdef CONFIG_MACH_OMAP_PERSEUS2
+#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
+#else
+#define xip_elapsed_since(x)	(signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
+#endif
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period.  This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#define xip_cpu_idle()  asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1))
+
+#endif /* __ARCH_OMAP_MTD_XIP_H__ */
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
new file mode 100644
index 000000000000..614b2c1327c7
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -0,0 +1,615 @@
+/*
+ * arch/arm/plat-omap/include/mach/mux.h
+ *
+ * Table of the Omap register configurations for the FUNC_MUX and
+ * PULL_DWN combinations.
+ *
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: Please use the following naming style for new pin entries.
+ *	 For example, W8_1610_MMC2_DAT0, where:
+ *	 - W8	     = ball
+ *	 - 1610	     = 1510 or 1610, none if common for both 1510 and 1610
+ *	 - MMC2_DAT0 = function
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#define PU_PD_SEL_NA		0	/* No pu_pd reg available */
+#define PULL_DWN_CTRL_NA	0	/* No pull-down control needed */
+
+#ifdef	CONFIG_OMAP_MUX_DEBUG
+#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
+					.mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_name = "PULL_DWN_CTRL_"#reg, \
+					.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_name = "PU_PD_SEL_"#reg, \
+					.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
+					.mux_reg = OMAP730_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_730(reg, bit, status)	.pull_name = "OMAP730_IO_CONF_"#reg, \
+					.pull_reg = OMAP730_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#else
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG(reg, bit, status)	.pull_reg = PULL_DWN_CTRL_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
+					.pu_pd_val = status,
+
+#define MUX_REG_730(reg, mode_offset, mode) \
+					.mux_reg = OMAP730_IO_CONF_##reg, \
+					.mask_offset = mode_offset, \
+					.mask = mode,
+
+#define PULL_REG_730(reg, bit, status)	.pull_reg = OMAP730_IO_CONF_##reg, \
+					.pull_bit = bit, \
+					.pull_val = status,
+
+#endif /* CONFIG_OMAP_MUX_DEBUG */
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode,	\
+		pull_reg, pull_bit, pull_status,	\
+		pu_pd_reg, pu_pd_status, debug_status)	\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG(mux_reg, mode_offset, mode)		\
+	PULL_REG(pull_reg, pull_bit, pull_status)	\
+	PU_PD_REG(pu_pd_reg, pu_pd_status)		\
+},
+
+
+/*
+ * OMAP730 has a slightly different config for the pin mux.
+ * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
+ *   not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ *   as mux config
+ */
+#define MUX_CFG_730(desc, mux_reg, mode_offset, mode,	\
+		   pull_bit, pull_status, debug_status)\
+{							\
+	.name =	 desc,					\
+	.debug = debug_status,				\
+	MUX_REG_730(mux_reg, mode_offset, mode)		\
+	PULL_REG_730(mux_reg, pull_bit, pull_status)	\
+	PU_PD_REG(NA, 0)		\
+},
+
+#define MUX_CFG_24XX(desc, reg_offset, mode,			\
+				pull_en, pull_mode, dbg)	\
+{								\
+	.name		= desc,					\
+	.debug		= dbg,					\
+	.mux_reg	= reg_offset,				\
+	.mask		= mode,					\
+	.pull_val	= pull_en,				\
+	.pu_pd_val	= pull_mode,				\
+},
+
+
+#define PULL_DISABLED	0
+#define PULL_ENABLED	1
+
+#define PULL_DOWN	0
+#define PULL_UP		1
+
+struct pin_config {
+	char *name;
+	unsigned char busy;
+	unsigned char debug;
+
+	const char *mux_reg_name;
+	const unsigned int mux_reg;
+	const unsigned char mask_offset;
+	const unsigned char mask;
+
+	const char *pull_name;
+	const unsigned int pull_reg;
+	const unsigned char pull_val;
+	const unsigned char pull_bit;
+
+	const char *pu_pd_name;
+	const unsigned int pu_pd_reg;
+	const unsigned char pu_pd_val;
+};
+
+enum omap730_index {
+	/* OMAP 730 keyboard */
+	E2_730_KBR0,
+	J7_730_KBR1,
+	E1_730_KBR2,
+	F3_730_KBR3,
+	D2_730_KBR4,
+	C2_730_KBC0,
+	D3_730_KBC1,
+	E4_730_KBC2,
+	F4_730_KBC3,
+	E3_730_KBC4,
+
+	/* USB */
+	AA17_730_USB_DM,
+	W16_730_USB_PU_EN,
+	W17_730_USB_VBUSI,
+};
+
+enum omap1xxx_index {
+	/* UART1 (BT_UART_GATING)*/
+	UART1_TX = 0,
+	UART1_RTS,
+
+	/* UART2 (COM_UART_GATING)*/
+	UART2_TX,
+	UART2_RX,
+	UART2_CTS,
+	UART2_RTS,
+
+	/* UART3 (GIGA_UART_GATING) */
+	UART3_TX,
+	UART3_RX,
+	UART3_CTS,
+	UART3_RTS,
+	UART3_CLKREQ,
+	UART3_BCLK,	/* 12MHz clock out */
+	Y15_1610_UART3_RTS,
+
+	/* PWT & PWL */
+	PWT,
+	PWL,
+
+	/* USB master generic */
+	R18_USB_VBUS,
+	R18_1510_USB_GPIO0,
+	W4_USB_PUEN,
+	W4_USB_CLKO,
+	W4_USB_HIGHZ,
+	W4_GPIO58,
+
+	/* USB1 master */
+	USB1_SUSP,
+	USB1_SEO,
+	W13_1610_USB1_SE0,
+	USB1_TXEN,
+	USB1_TXD,
+	USB1_VP,
+	USB1_VM,
+	USB1_RCV,
+	USB1_SPEED,
+	R13_1610_USB1_SPEED,
+	R13_1710_USB1_SE0,
+
+	/* USB2 master */
+	USB2_SUSP,
+	USB2_VP,
+	USB2_TXEN,
+	USB2_VM,
+	USB2_RCV,
+	USB2_SEO,
+	USB2_TXD,
+
+	/* OMAP-1510 GPIO */
+	R18_1510_GPIO0,
+	R19_1510_GPIO1,
+	M14_1510_GPIO2,
+
+	/* OMAP1610 GPIO */
+	P18_1610_GPIO3,
+	Y15_1610_GPIO17,
+
+	/* OMAP-1710 GPIO */
+	R18_1710_GPIO0,
+	V2_1710_GPIO10,
+	N21_1710_GPIO14,
+	W15_1710_GPIO40,
+
+	/* MPUIO */
+	MPUIO2,
+	N15_1610_MPUIO2,
+	MPUIO4,
+	MPUIO5,
+	T20_1610_MPUIO5,
+	W11_1610_MPUIO6,
+	V10_1610_MPUIO7,
+	W11_1610_MPUIO9,
+	V10_1610_MPUIO10,
+	W10_1610_MPUIO11,
+	E20_1610_MPUIO13,
+	U20_1610_MPUIO14,
+	E19_1610_MPUIO15,
+
+	/* MCBSP2 */
+	MCBSP2_CLKR,
+	MCBSP2_CLKX,
+	MCBSP2_DR,
+	MCBSP2_DX,
+	MCBSP2_FSR,
+	MCBSP2_FSX,
+
+	/* MCBSP3 */
+	MCBSP3_CLKX,
+
+	/* Misc ballouts */
+	BALLOUT_V8_ARMIO3,
+	N20_HDQ,
+
+	/* OMAP-1610 MMC2 */
+	W8_1610_MMC2_DAT0,
+	V8_1610_MMC2_DAT1,
+	W15_1610_MMC2_DAT2,
+	R10_1610_MMC2_DAT3,
+	Y10_1610_MMC2_CLK,
+	Y8_1610_MMC2_CMD,
+	V9_1610_MMC2_CMDDIR,
+	V5_1610_MMC2_DATDIR0,
+	W19_1610_MMC2_DATDIR1,
+	R18_1610_MMC2_CLKIN,
+
+	/* OMAP-1610 External Trace Interface */
+	M19_1610_ETM_PSTAT0,
+	L15_1610_ETM_PSTAT1,
+	L18_1610_ETM_PSTAT2,
+	L19_1610_ETM_D0,
+	J19_1610_ETM_D6,
+	J18_1610_ETM_D7,
+
+	/* OMAP16XX GPIO */
+	P20_1610_GPIO4,
+	V9_1610_GPIO7,
+	W8_1610_GPIO9,
+	N20_1610_GPIO11,
+	N19_1610_GPIO13,
+	P10_1610_GPIO22,
+	V5_1610_GPIO24,
+	AA20_1610_GPIO_41,
+	W19_1610_GPIO48,
+	M7_1610_GPIO62,
+	V14_16XX_GPIO37,
+	R9_16XX_GPIO18,
+	L14_16XX_GPIO49,
+
+	/* OMAP-1610 uWire */
+	V19_1610_UWIRE_SCLK,
+	U18_1610_UWIRE_SDI,
+	W21_1610_UWIRE_SDO,
+	N14_1610_UWIRE_CS0,
+	P15_1610_UWIRE_CS3,
+	N15_1610_UWIRE_CS1,
+
+	/* OMAP-1610 SPI */
+	U19_1610_SPIF_SCK,
+	U18_1610_SPIF_DIN,
+	P20_1610_SPIF_DIN,
+	W21_1610_SPIF_DOUT,
+	R18_1610_SPIF_DOUT,
+	N14_1610_SPIF_CS0,
+	N15_1610_SPIF_CS1,
+	T19_1610_SPIF_CS2,
+	P15_1610_SPIF_CS3,
+
+	/* OMAP-1610 Flash */
+	L3_1610_FLASH_CS2B_OE,
+	M8_1610_FLASH_CS2B_WE,
+
+	/* First MMC */
+	MMC_CMD,
+	MMC_DAT1,
+	MMC_DAT2,
+	MMC_DAT0,
+	MMC_CLK,
+	MMC_DAT3,
+
+	/* OMAP-1710 MMC CMDDIR and DATDIR0 */
+	M15_1710_MMC_CLKI,
+	P19_1710_MMC_CMDDIR,
+	P20_1710_MMC_DATDIR0,
+
+	/* OMAP-1610 USB0 alternate pin configuration */
+	W9_USB0_TXEN,
+	AA9_USB0_VP,
+	Y5_USB0_RCV,
+	R9_USB0_VM,
+	V6_USB0_TXD,
+	W5_USB0_SE0,
+	V9_USB0_SPEED,
+	V9_USB0_SUSP,
+
+	/* USB2 */
+	W9_USB2_TXEN,
+	AA9_USB2_VP,
+	Y5_USB2_RCV,
+	R9_USB2_VM,
+	V6_USB2_TXD,
+	W5_USB2_SE0,
+
+	/* 16XX UART */
+	R13_1610_UART1_TX,
+	V14_16XX_UART1_RX,
+	R14_1610_UART1_CTS,
+	AA15_1610_UART1_RTS,
+	R9_16XX_UART2_RX,
+	L14_16XX_UART3_RX,
+
+	/* I2C OMAP-1610 */
+	I2C_SCL,
+	I2C_SDA,
+
+	/* Keypad */
+	F18_1610_KBC0,
+	D20_1610_KBC1,
+	D19_1610_KBC2,
+	E18_1610_KBC3,
+	C21_1610_KBC4,
+	G18_1610_KBR0,
+	F19_1610_KBR1,
+	H14_1610_KBR2,
+	E20_1610_KBR3,
+	E19_1610_KBR4,
+	N19_1610_KBR5,
+
+	/* Power management */
+	T20_1610_LOW_PWR,
+
+	/* MCLK Settings */
+	V5_1710_MCLK_ON,
+	V5_1710_MCLK_OFF,
+	R10_1610_MCLK_ON,
+	R10_1610_MCLK_OFF,
+
+	/* CompactFlash controller */
+	P11_1610_CF_CD2,
+	R11_1610_CF_IOIS16,
+	V10_1610_CF_IREQ,
+	W10_1610_CF_RESET,
+	W11_1610_CF_CD1,
+
+	/* parallel camera */
+	J15_1610_CAM_LCLK,
+	J18_1610_CAM_D7,
+	J19_1610_CAM_D6,
+	J14_1610_CAM_D5,
+	K18_1610_CAM_D4,
+	K19_1610_CAM_D3,
+	K15_1610_CAM_D2,
+	K14_1610_CAM_D1,
+	L19_1610_CAM_D0,
+	L18_1610_CAM_VS,
+	L15_1610_CAM_HS,
+	M19_1610_CAM_RSTZ,
+	Y15_1610_CAM_OUTCLK,
+
+	/* serial camera */
+	H19_1610_CAM_EXCLK,
+	Y12_1610_CCP_CLKP,
+	W13_1610_CCP_CLKM,
+	W14_1610_CCP_DATAP,
+	Y14_1610_CCP_DATAM,
+
+};
+
+enum omap24xx_index {
+	/* 24xx I2C */
+	M19_24XX_I2C1_SCL,
+	L15_24XX_I2C1_SDA,
+	J15_24XX_I2C2_SCL,
+	H19_24XX_I2C2_SDA,
+
+	/* 24xx Menelaus interrupt */
+	W19_24XX_SYS_NIRQ,
+
+	/* 24xx clock */
+	W14_24XX_SYS_CLKOUT,
+
+	/* 24xx GPMC chipselects, wait pin monitoring */
+	E2_GPMC_NCS2,
+	L2_GPMC_NCS7,
+	L3_GPMC_WAIT0,
+	N7_GPMC_WAIT1,
+	M1_GPMC_WAIT2,
+	P1_GPMC_WAIT3,
+
+	/* 242X McBSP */
+	Y15_24XX_MCBSP2_CLKX,
+	R14_24XX_MCBSP2_FSX,
+	W15_24XX_MCBSP2_DR,
+	V15_24XX_MCBSP2_DX,
+
+	/* 24xx GPIO */
+	M21_242X_GPIO11,
+	P21_242X_GPIO12,
+	AA10_242X_GPIO13,
+	AA6_242X_GPIO14,
+	AA4_242X_GPIO15,
+	Y11_242X_GPIO16,
+	AA12_242X_GPIO17,
+	AA8_242X_GPIO58,
+	Y20_24XX_GPIO60,
+	W4__24XX_GPIO74,
+	N15_24XX_GPIO85,
+	M15_24XX_GPIO92,
+	P20_24XX_GPIO93,
+	P18_24XX_GPIO95,
+	M18_24XX_GPIO96,
+	L14_24XX_GPIO97,
+	J15_24XX_GPIO99,
+	V14_24XX_GPIO117,
+	P14_24XX_GPIO125,
+
+	/* 242x DBG GPIO */
+	V4_242X_GPIO49,
+	W2_242X_GPIO50,
+	U4_242X_GPIO51,
+	V3_242X_GPIO52,
+	V2_242X_GPIO53,
+	V6_242X_GPIO53,
+	T4_242X_GPIO54,
+	Y4_242X_GPIO54,
+	T3_242X_GPIO55,
+	U2_242X_GPIO56,
+
+	/* 24xx external DMA requests */
+	AA10_242X_DMAREQ0,
+	AA6_242X_DMAREQ1,
+	E4_242X_DMAREQ2,
+	G4_242X_DMAREQ3,
+	D3_242X_DMAREQ4,
+	E3_242X_DMAREQ5,
+
+	/* UART3 */
+	K15_24XX_UART3_TX,
+	K14_24XX_UART3_RX,
+
+	/* MMC/SDIO */
+	G19_24XX_MMC_CLKO,
+	H18_24XX_MMC_CMD,
+	F20_24XX_MMC_DAT0,
+	H14_24XX_MMC_DAT1,
+	E19_24XX_MMC_DAT2,
+	D19_24XX_MMC_DAT3,
+	F19_24XX_MMC_DAT_DIR0,
+	E20_24XX_MMC_DAT_DIR1,
+	F18_24XX_MMC_DAT_DIR2,
+	E18_24XX_MMC_DAT_DIR3,
+	G18_24XX_MMC_CMD_DIR,
+	H15_24XX_MMC_CLKI,
+
+	/* Full speed USB */
+	J20_24XX_USB0_PUEN,
+	J19_24XX_USB0_VP,
+	K20_24XX_USB0_VM,
+	J18_24XX_USB0_RCV,
+	K19_24XX_USB0_TXEN,
+	J14_24XX_USB0_SE0,
+	K18_24XX_USB0_DAT,
+
+	N14_24XX_USB1_SE0,
+	W12_24XX_USB1_SE0,
+	P15_24XX_USB1_DAT,
+	R13_24XX_USB1_DAT,
+	W20_24XX_USB1_TXEN,
+	P13_24XX_USB1_TXEN,
+	V19_24XX_USB1_RCV,
+	V12_24XX_USB1_RCV,
+
+	AA10_24XX_USB2_SE0,
+	Y11_24XX_USB2_DAT,
+	AA12_24XX_USB2_TXEN,
+	AA6_24XX_USB2_RCV,
+	AA4_24XX_USB2_TLLSE0,
+
+	/* Keypad GPIO*/
+	T19_24XX_KBR0,
+	R19_24XX_KBR1,
+	V18_24XX_KBR2,
+	M21_24XX_KBR3,
+	E5__24XX_KBR4,
+	M18_24XX_KBR5,
+	R20_24XX_KBC0,
+	M14_24XX_KBC1,
+	H19_24XX_KBC2,
+	V17_24XX_KBC3,
+	P21_24XX_KBC4,
+	L14_24XX_KBC5,
+	N19_24XX_KBC6,
+
+	/* 24xx Menelaus Keypad GPIO */
+	B3__24XX_KBR5,
+	AA4_24XX_KBC2,
+	B13_24XX_KBC6,
+
+	/* 2430 USB */
+	AD9_2430_USB0_PUEN,
+	Y11_2430_USB0_VP,
+	AD7_2430_USB0_VM,
+	AE7_2430_USB0_RCV,
+	AD4_2430_USB0_TXEN,
+	AF9_2430_USB0_SE0,
+	AE6_2430_USB0_DAT,
+	AD24_2430_USB1_SE0,
+	AB24_2430_USB1_RCV,
+	Y25_2430_USB1_TXEN,
+	AA26_2430_USB1_DAT,
+
+	/* 2430 HS-USB */
+	AD9_2430_USB0HS_DATA3,
+	Y11_2430_USB0HS_DATA4,
+	AD7_2430_USB0HS_DATA5,
+	AE7_2430_USB0HS_DATA6,
+	AD4_2430_USB0HS_DATA2,
+	AF9_2430_USB0HS_DATA0,
+	AE6_2430_USB0HS_DATA1,
+	AE8_2430_USB0HS_CLK,
+	AD8_2430_USB0HS_DIR,
+	AE5_2430_USB0HS_STP,
+	AE9_2430_USB0HS_NXT,
+	AC7_2430_USB0HS_DATA7,
+
+	/* 2430 McBSP */
+	AC10_2430_MCBSP2_FSX,
+	AD16_2430_MCBSP2_CLX,
+	AE13_2430_MCBSP2_DX,
+	AD13_2430_MCBSP2_DR,
+	AC10_2430_MCBSP2_FSX_OFF,
+	AD16_2430_MCBSP2_CLX_OFF,
+	AE13_2430_MCBSP2_DX_OFF,
+	AD13_2430_MCBSP2_DR_OFF,
+
+};
+
+struct omap_mux_cfg {
+	struct pin_config	*pins;
+	unsigned long		size;
+	int			(*cfg_reg)(const struct pin_config *cfg);
+};
+
+#ifdef	CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
+extern int omap1_mux_init(void);
+extern int omap2_mux_init(void);
+extern int omap_mux_register(struct omap_mux_cfg *);
+extern int omap_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap1_mux_init(void) { return 0; }
+static inline int omap2_mux_init(void) { return 0; }
+static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/nand.h b/arch/arm/plat-omap/include/mach/nand.h
new file mode 100644
index 000000000000..631a7bed1eef
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/nand.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-omap/include/mach/nand.h
+ *
+ * Copyright (C) 2006 Micron Technology Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/partitions.h>
+
+struct omap_nand_platform_data {
+	unsigned int		options;
+	int			cs;
+	int			gpio_irq;
+	struct mtd_partition	*parts;
+	int			nr_parts;
+	int			(*nand_setup)(void __iomem *);
+	int			(*dev_ready)(struct omap_nand_platform_data *);
+	int			dma_channel;
+	void __iomem		*gpmc_cs_baseaddr;
+	void __iomem		*gpmc_baseaddr;
+};
diff --git a/arch/arm/plat-omap/include/mach/omap-alsa.h b/arch/arm/plat-omap/include/mach/omap-alsa.h
new file mode 100644
index 000000000000..bdf30a0f87f2
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap-alsa.h
@@ -0,0 +1,123 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap-alsa.h
+ *
+ * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
+ *
+ * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi>
+ *
+ * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil
+ * Written by Daniel Petrini, David Cohen, Anderson Briglia
+ *            {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  History
+ *  -------
+ *
+ *  2005/07/25 INdT-10LE Kernel Team - 	Alsa driver for omap osk,
+ *  					original version based in sa1100 driver
+ *  					and omap oss driver.
+ */
+
+#ifndef __OMAP_ALSA_H
+#define __OMAP_ALSA_H
+
+#include <mach/dma.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <mach/mcbsp.h>
+#include <linux/platform_device.h>
+
+#define DMA_BUF_SIZE	(1024 * 8)
+
+/*
+ * Buffer management for alsa and dma
+ */
+struct audio_stream {
+	char *id;		/* identification string */
+	int stream_id;		/* numeric identification */
+	int dma_dev;		/* dma number of that device */
+	int *lch;		/* Chain of channels this stream is linked to */
+	char started;		/* to store if the chain was started or not */
+	int dma_q_head;		/* DMA Channel Q Head */
+	int dma_q_tail;		/* DMA Channel Q Tail */
+	char dma_q_count;	/* DMA Channel Q Count */
+	int active:1;		/* we are using this stream for transfer now */
+	int period;		/* current transfer period */
+	int periods;		/* current count of periods registerd in the DMA engine */
+	spinlock_t dma_lock;	/* for locking in DMA operations */
+	struct snd_pcm_substream *stream;	/* the pcm stream */
+	unsigned linked:1;	/* dma channels linked */
+	int offset;		/* store start position of the last period in the alsa buffer */
+	int (*hw_start)(void);  /* interface to start HW interface, e.g. McBSP */
+	int (*hw_stop)(void);   /* interface to stop HW interface, e.g. McBSP */
+};
+
+/*
+ * Alsa card structure for aic23
+ */
+struct snd_card_omap_codec {
+	struct snd_card *card;
+	struct snd_pcm *pcm;
+	long samplerate;
+	struct audio_stream s[2];	/* playback & capture */
+};
+
+/* Codec specific information and function pointers.
+ * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c)
+ * are responsible for defining the function pointers.
+ */
+struct omap_alsa_codec_config {
+	char 	*name;
+	struct	omap_mcbsp_reg_cfg *mcbsp_regs_alsa;
+	struct	snd_pcm_hw_constraint_list *hw_constraints_rates;
+	struct	snd_pcm_hardware *snd_omap_alsa_playback;
+	struct	snd_pcm_hardware *snd_omap_alsa_capture;
+	void	(*codec_configure_dev)(void);
+	void	(*codec_set_samplerate)(long);
+	void	(*codec_clock_setup)(void);
+	int	(*codec_clock_on)(void);
+	int 	(*codec_clock_off)(void);
+	int	(*get_default_samplerate)(void);
+};
+
+/*********** Mixer function prototypes *************************/
+int snd_omap_mixer(struct snd_card_omap_codec *);
+void snd_omap_init_mixer(void);
+
+#ifdef CONFIG_PM
+void snd_omap_suspend_mixer(void);
+void snd_omap_resume_mixer(void);
+#endif
+
+int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config);
+int snd_omap_alsa_remove(struct platform_device *pdev);
+#ifdef CONFIG_PM
+int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state);
+int snd_omap_alsa_resume(struct platform_device *pdev);
+#else
+#define snd_omap_alsa_suspend	NULL
+#define snd_omap_alsa_resume	NULL
+#endif
+
+void callback_omap_alsa_sound_dma(void *);
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/mach/omap1510.h
new file mode 100644
index 000000000000..505a38af8b22
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap1510.h
@@ -0,0 +1,48 @@
+/* arch/arm/plat-omap/include/mach/omap1510.h
+ *
+ * Hardware definitions for TI OMAP1510 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_H
+#define __ASM_ARCH_OMAP15XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP1510_DSP_BASE	0xE0000000
+#define OMAP1510_DSP_SIZE	0x28000
+#define OMAP1510_DSP_START	0xE0000000
+
+#define OMAP1510_DSPREG_BASE	0xE1000000
+#define OMAP1510_DSPREG_SIZE	SZ_128K
+#define OMAP1510_DSPREG_START	0xE1000000
+
+#endif /*  __ASM_ARCH_OMAP15XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/mach/omap16xx.h
new file mode 100644
index 000000000000..c6c93afb2788
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap16xx.h
@@ -0,0 +1,197 @@
+/* arch/arm/plat-omap/include/mach/omap16xx.h
+ *
+ * Hardware definitions for TI OMAP1610/5912/1710 processors.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP16XX_H
+#define __ASM_ARCH_OMAP16XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP16XX_DSP_BASE	0xE0000000
+#define OMAP16XX_DSP_SIZE	0x28000
+#define OMAP16XX_DSP_START	0xE0000000
+
+#define OMAP16XX_DSPREG_BASE	0xE1000000
+#define OMAP16XX_DSPREG_SIZE	SZ_128K
+#define OMAP16XX_DSPREG_START	0xE1000000
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_IH2_0_BASE		(0xfffe0000)
+#define OMAP_IH2_1_BASE		(0xfffe0100)
+#define OMAP_IH2_2_BASE		(0xfffe0200)
+#define OMAP_IH2_3_BASE		(0xfffe0300)
+
+#define OMAP_IH2_0_ITR		(OMAP_IH2_0_BASE + 0x00)
+#define OMAP_IH2_0_MIR		(OMAP_IH2_0_BASE + 0x04)
+#define OMAP_IH2_0_SIR_IRQ	(OMAP_IH2_0_BASE + 0x10)
+#define OMAP_IH2_0_SIR_FIQ	(OMAP_IH2_0_BASE + 0x14)
+#define OMAP_IH2_0_CONTROL	(OMAP_IH2_0_BASE + 0x18)
+#define OMAP_IH2_0_ILR0		(OMAP_IH2_0_BASE + 0x1c)
+#define OMAP_IH2_0_ISR		(OMAP_IH2_0_BASE + 0x9c)
+
+#define OMAP_IH2_1_ITR		(OMAP_IH2_1_BASE + 0x00)
+#define OMAP_IH2_1_MIR		(OMAP_IH2_1_BASE + 0x04)
+#define OMAP_IH2_1_SIR_IRQ	(OMAP_IH2_1_BASE + 0x10)
+#define OMAP_IH2_1_SIR_FIQ	(OMAP_IH2_1_BASE + 0x14)
+#define OMAP_IH2_1_CONTROL	(OMAP_IH2_1_BASE + 0x18)
+#define OMAP_IH2_1_ILR1		(OMAP_IH2_1_BASE + 0x1c)
+#define OMAP_IH2_1_ISR		(OMAP_IH2_1_BASE + 0x9c)
+
+#define OMAP_IH2_2_ITR		(OMAP_IH2_2_BASE + 0x00)
+#define OMAP_IH2_2_MIR		(OMAP_IH2_2_BASE + 0x04)
+#define OMAP_IH2_2_SIR_IRQ	(OMAP_IH2_2_BASE + 0x10)
+#define OMAP_IH2_2_SIR_FIQ	(OMAP_IH2_2_BASE + 0x14)
+#define OMAP_IH2_2_CONTROL	(OMAP_IH2_2_BASE + 0x18)
+#define OMAP_IH2_2_ILR2		(OMAP_IH2_2_BASE + 0x1c)
+#define OMAP_IH2_2_ISR		(OMAP_IH2_2_BASE + 0x9c)
+
+#define OMAP_IH2_3_ITR		(OMAP_IH2_3_BASE + 0x00)
+#define OMAP_IH2_3_MIR		(OMAP_IH2_3_BASE + 0x04)
+#define OMAP_IH2_3_SIR_IRQ	(OMAP_IH2_3_BASE + 0x10)
+#define OMAP_IH2_3_SIR_FIQ	(OMAP_IH2_3_BASE + 0x14)
+#define OMAP_IH2_3_CONTROL	(OMAP_IH2_3_BASE + 0x18)
+#define OMAP_IH2_3_ILR3		(OMAP_IH2_3_BASE + 0x1c)
+#define OMAP_IH2_3_ISR		(OMAP_IH2_3_BASE + 0x9c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_ARM_IDLECT3	(CLKGEN_REG_BASE + 0x24)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV6	(1 << 8)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV7	(1 << 9)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV8	(1 << 10)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV9	(1 << 11)
+#define OMAP16XX_SUBLVDS_CONF_VALID	(1 << 13)
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP1610_RESET_CONTROL  0xfffe1140
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_SWITCH_BASE		 (0xfffbc800)
+#define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
+
+/* UART3 Registers Maping through MPU bus */
+#define UART3_RHR               (OMAP_UART3_BASE + 0)
+#define UART3_THR               (OMAP_UART3_BASE + 0)
+#define UART3_DLL               (OMAP_UART3_BASE + 0)
+#define UART3_IER               (OMAP_UART3_BASE + 4)
+#define UART3_DLH               (OMAP_UART3_BASE + 4)
+#define UART3_IIR               (OMAP_UART3_BASE + 8)
+#define UART3_FCR               (OMAP_UART3_BASE + 8)
+#define UART3_EFR               (OMAP_UART3_BASE + 8)
+#define UART3_LCR               (OMAP_UART3_BASE + 0x0C)
+#define UART3_MCR               (OMAP_UART3_BASE + 0x10)
+#define UART3_XON1_ADDR1        (OMAP_UART3_BASE + 0x10)
+#define UART3_XON2_ADDR2        (OMAP_UART3_BASE + 0x14)
+#define UART3_LSR               (OMAP_UART3_BASE + 0x14)
+#define UART3_TCR               (OMAP_UART3_BASE + 0x18)
+#define UART3_MSR               (OMAP_UART3_BASE + 0x18)
+#define UART3_XOFF1             (OMAP_UART3_BASE + 0x18)
+#define UART3_XOFF2             (OMAP_UART3_BASE + 0x1C)
+#define UART3_SPR               (OMAP_UART3_BASE + 0x1C)
+#define UART3_TLR               (OMAP_UART3_BASE + 0x1C)
+#define UART3_MDR1              (OMAP_UART3_BASE + 0x20)
+#define UART3_MDR2              (OMAP_UART3_BASE + 0x24)
+#define UART3_SFLSR             (OMAP_UART3_BASE + 0x28)
+#define UART3_TXFLL             (OMAP_UART3_BASE + 0x28)
+#define UART3_RESUME            (OMAP_UART3_BASE + 0x2C)
+#define UART3_TXFLH             (OMAP_UART3_BASE + 0x2C)
+#define UART3_SFREGL            (OMAP_UART3_BASE + 0x30)
+#define UART3_RXFLL             (OMAP_UART3_BASE + 0x30)
+#define UART3_SFREGH            (OMAP_UART3_BASE + 0x34)
+#define UART3_RXFLH             (OMAP_UART3_BASE + 0x34)
+#define UART3_BLR               (OMAP_UART3_BASE + 0x38)
+#define UART3_ACREG             (OMAP_UART3_BASE + 0x3C)
+#define UART3_DIV16             (OMAP_UART3_BASE + 0x3C)
+#define UART3_SCR               (OMAP_UART3_BASE + 0x40)
+#define UART3_SSR               (OMAP_UART3_BASE + 0x44)
+#define UART3_EBLR              (OMAP_UART3_BASE + 0x48)
+#define UART3_OSC_12M_SEL       (OMAP_UART3_BASE + 0x4C)
+#define UART3_MVR               (OMAP_UART3_BASE + 0x50)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* 32-bit Watchdog timer in OMAP 16XX */
+#define OMAP_16XX_WATCHDOG_BASE        (0xfffeb000)
+#define OMAP_16XX_WIDR         (OMAP_16XX_WATCHDOG_BASE + 0x00)
+#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
+#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
+#define OMAP_16XX_WCLR         (OMAP_16XX_WATCHDOG_BASE + 0x24)
+#define OMAP_16XX_WCRR         (OMAP_16XX_WATCHDOG_BASE + 0x28)
+#define OMAP_16XX_WLDR         (OMAP_16XX_WATCHDOG_BASE + 0x2c)
+#define OMAP_16XX_WTGR         (OMAP_16XX_WATCHDOG_BASE + 0x30)
+#define OMAP_16XX_WWPS         (OMAP_16XX_WATCHDOG_BASE + 0x34)
+#define OMAP_16XX_WSPR         (OMAP_16XX_WATCHDOG_BASE + 0x48)
+
+#define WCLR_PRE_SHIFT         5
+#define WCLR_PTV_SHIFT         2
+
+#define WWPS_W_PEND_WSPR       (1 << 4)
+#define WWPS_W_PEND_WTGR       (1 << 3)
+#define WWPS_W_PEND_WLDR       (1 << 2)
+#define WWPS_W_PEND_WCRR       (1 << 1)
+#define WWPS_W_PEND_WCLR       (1 << 0)
+
+#define WSPR_ENABLE_0          (0x0000bbbb)
+#define WSPR_ENABLE_1          (0x00004444)
+#define WSPR_DISABLE_0         (0x0000aaaa)
+#define WSPR_DISABLE_1         (0x00005555)
+
+/* Mailbox */
+#define OMAP16XX_MAILBOX_BASE	(0xfffcf000)
+
+#endif /*  __ASM_ARCH_OMAP16XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/mach/omap24xx.h
new file mode 100644
index 000000000000..bb8319d66e9f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap24xx.h
@@ -0,0 +1,107 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap24xx.h
+ *
+ * This file contains the processor specific definitions
+ * of the TI OMAP24XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP24XX_H
+#define __ASM_ARCH_OMAP24XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers. Note also that some of these defines are needed
+ * for omap1 to compile without adding ifdefs.
+ */
+
+#define L4_24XX_BASE		0x48000000
+#define L4_WK_243X_BASE		0x49000000
+#define L3_24XX_BASE		0x68000000
+
+/* interrupt controller */
+#define OMAP24XX_IC_BASE	(L4_24XX_BASE + 0xfe000)
+#define OMAP24XX_IVA_INTC_BASE	0x40000000
+#define IRQ_SIR_IRQ		0x0040
+
+#define OMAP2420_CTRL_BASE	L4_24XX_BASE
+#define OMAP2420_32KSYNCT_BASE	(L4_24XX_BASE + 0x4000)
+#define OMAP2420_PRCM_BASE	(L4_24XX_BASE + 0x8000)
+#define OMAP2420_CM_BASE	(L4_24XX_BASE + 0x8000)
+#define OMAP2420_PRM_BASE	OMAP2420_CM_BASE
+#define OMAP2420_SDRC_BASE	(L3_24XX_BASE + 0x9000)
+#define OMAP2420_SMS_BASE	0x68008000
+
+#define OMAP2430_32KSYNCT_BASE	(L4_WK_243X_BASE + 0x20000)
+#define OMAP2430_PRCM_BASE	(L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_CM_BASE	(L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_PRM_BASE	OMAP2430_CM_BASE
+
+#define OMAP243X_SMS_BASE	0x6C000000
+#define OMAP243X_SDRC_BASE	0x6D000000
+#define OMAP243X_GPMC_BASE	0x6E000000
+#define OMAP243X_SCM_BASE	(L4_WK_243X_BASE + 0x2000)
+#define OMAP243X_CTRL_BASE	OMAP243X_SCM_BASE
+#define OMAP243X_HS_BASE	(L4_24XX_BASE + 0x000ac000)
+
+/* DSP SS */
+#define OMAP2420_DSP_BASE	0x58000000
+#define OMAP2420_DSP_MEM_BASE	(OMAP2420_DSP_BASE + 0x0)
+#define OMAP2420_DSP_IPI_BASE	(OMAP2420_DSP_BASE + 0x1000000)
+#define OMAP2420_DSP_MMU_BASE	(OMAP2420_DSP_BASE + 0x2000000)
+
+#define OMAP243X_DSP_BASE	0x5C000000
+#define OMAP243X_DSP_MEM_BASE	(OMAP243X_DSP_BASE + 0x0)
+#define OMAP243X_DSP_MMU_BASE	(OMAP243X_DSP_BASE + 0x1000000)
+
+/* Mailbox */
+#define OMAP24XX_MAILBOX_BASE	(L4_24XX_BASE + 0x94000)
+
+/* Camera */
+#define OMAP24XX_CAMERA_BASE	(L4_24XX_BASE + 0x52000)
+
+/* Security */
+#define OMAP24XX_SEC_BASE	(L4_24XX_BASE + 0xA0000)
+#define OMAP24XX_SEC_RNG_BASE	(OMAP24XX_SEC_BASE + 0x0000)
+#define OMAP24XX_SEC_DES_BASE	(OMAP24XX_SEC_BASE + 0x2000)
+#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000)
+#define OMAP24XX_SEC_AES_BASE	(OMAP24XX_SEC_BASE + 0x6000)
+#define OMAP24XX_SEC_PKA_BASE	(OMAP24XX_SEC_BASE + 0x8000)
+
+#if defined(CONFIG_ARCH_OMAP2420)
+
+#define OMAP2_32KSYNCT_BASE	OMAP2420_32KSYNCT_BASE
+#define OMAP2_PRCM_BASE		OMAP2420_PRCM_BASE
+#define OMAP2_CM_BASE		OMAP2420_CM_BASE
+#define OMAP2_PRM_BASE		OMAP2420_PRM_BASE
+#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
+
+#elif defined(CONFIG_ARCH_OMAP2430)
+
+#define OMAP2_32KSYNCT_BASE	OMAP2430_32KSYNCT_BASE
+#define OMAP2_PRCM_BASE		OMAP2430_PRCM_BASE
+#define OMAP2_CM_BASE		OMAP2430_CM_BASE
+#define OMAP2_PRM_BASE		OMAP2430_PRM_BASE
+#define OMAP2_VA_IC_BASE	IO_ADDRESS(OMAP24XX_IC_BASE)
+
+#endif
+
+#endif /* __ASM_ARCH_OMAP24XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/mach/omap34xx.h
new file mode 100644
index 000000000000..8e0479fff05a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap34xx.h
@@ -0,0 +1,72 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap34xx.h
+ *
+ * This file contains the processor specific definitions of the TI OMAP34XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_OMAP34XX_H
+#define __ASM_ARCH_OMAP34XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+
+#define L4_34XX_BASE		0x48000000
+#define L4_WK_34XX_BASE		0x48300000
+#define L4_WK_OMAP_BASE		L4_WK_34XX_BASE
+#define L4_PER_34XX_BASE	0x49000000
+#define L4_PER_OMAP_BASE	L4_PER_34XX_BASE
+#define L4_EMU_34XX_BASE	0x54000000
+#define L4_EMU_BASE		L4_EMU_34XX_BASE
+#define L3_34XX_BASE		0x68000000
+#define L3_OMAP_BASE		L3_34XX_BASE
+
+#define OMAP3430_32KSYNCT_BASE	0x48320000
+#define OMAP3430_CM_BASE	0x48004800
+#define OMAP3430_PRM_BASE	0x48306800
+#define OMAP343X_SMS_BASE	0x6C000000
+#define OMAP343X_SDRC_BASE	0x6D000000
+#define OMAP34XX_GPMC_BASE	0x6E000000
+#define OMAP343X_SCM_BASE	0x48002000
+#define OMAP343X_CTRL_BASE	OMAP343X_SCM_BASE
+
+#define OMAP34XX_IC_BASE	0x48200000
+#define OMAP34XX_IVA_INTC_BASE	0x40000000
+#define OMAP34XX_HSUSB_OTG_BASE	(L4_34XX_BASE + 0xAB000)
+#define OMAP34XX_HSUSB_HOST_BASE	(L4_34XX_BASE + 0x64000)
+#define OMAP34XX_USBTLL_BASE	(L4_34XX_BASE + 0x62000)
+
+
+#if defined(CONFIG_ARCH_OMAP3430)
+
+#define OMAP2_32KSYNCT_BASE		OMAP3430_32KSYNCT_BASE
+#define OMAP2_CM_BASE			OMAP3430_CM_BASE
+#define OMAP2_PRM_BASE			OMAP3430_PRM_BASE
+#define OMAP2_VA_IC_BASE		IO_ADDRESS(OMAP34XX_IC_BASE)
+
+#endif
+
+#define OMAP34XX_DSP_BASE	0x58000000
+#define OMAP34XX_DSP_MEM_BASE	(OMAP34XX_DSP_BASE + 0x0)
+#define OMAP34XX_DSP_IPI_BASE	(OMAP34XX_DSP_BASE + 0x1000000)
+#define OMAP34XX_DSP_MMU_BASE	(OMAP34XX_DSP_BASE + 0x2000000)
+#endif /* __ASM_ARCH_OMAP34XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap730.h b/arch/arm/plat-omap/include/mach/omap730.h
new file mode 100644
index 000000000000..14272bc1a6fd
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omap730.h
@@ -0,0 +1,102 @@
+/* arch/arm/plat-omap/include/mach/omap730.h
+ *
+ * Hardware definitions for TI OMAP730 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP730_H
+#define __ASM_ARCH_OMAP730_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP730_DSP_BASE	0xE0000000
+#define OMAP730_DSP_SIZE	0x50000
+#define OMAP730_DSP_START	0xE0000000
+
+#define OMAP730_DSPREG_BASE	0xE1000000
+#define OMAP730_DSPREG_SIZE	SZ_128K
+#define OMAP730_DSPREG_START	0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_CONFIG_BASE	0xfffe1000
+#define OMAP730_IO_CONF_0	0xfffe1070
+#define OMAP730_IO_CONF_1	0xfffe1074
+#define OMAP730_IO_CONF_2	0xfffe1078
+#define OMAP730_IO_CONF_3	0xfffe107c
+#define OMAP730_IO_CONF_4	0xfffe1080
+#define OMAP730_IO_CONF_5	0xfffe1084
+#define OMAP730_IO_CONF_6	0xfffe1088
+#define OMAP730_IO_CONF_7	0xfffe108c
+#define OMAP730_IO_CONF_8	0xfffe1090
+#define OMAP730_IO_CONF_9	0xfffe1094
+#define OMAP730_IO_CONF_10	0xfffe1098
+#define OMAP730_IO_CONF_11	0xfffe109c
+#define OMAP730_IO_CONF_12	0xfffe10a0
+#define OMAP730_IO_CONF_13	0xfffe10a4
+
+#define OMAP730_MODE_1		0xfffe1010
+#define OMAP730_MODE_2		0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP730_MODE2_OFFSET	0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_FLASH_CFG_0	0xfffecc10
+#define OMAP730_FLASH_ACFG_0	0xfffecc50
+#define OMAP730_FLASH_CFG_1	0xfffecc14
+#define OMAP730_FLASH_ACFG_1	0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_ICR_BASE	0xfffbb800
+#define OMAP730_DSP_M_CTL	0xfffbb804
+#define OMAP730_DSP_MMU_BASE	0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_PCC_UPLD_CTRL_BASE	(0xfffe0900)
+#define OMAP730_PCC_UPLD_CTRL		(OMAP730_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /*  __ASM_ARCH_OMAP730_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
new file mode 100644
index 000000000000..cae037d13079
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/omapfb.h
@@ -0,0 +1,395 @@
+/*
+ * File: arch/arm/plat-omap/include/mach/omapfb.h
+ *
+ * Framebuffer driver for TI OMAP boards
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAPFB_H
+#define __OMAPFB_H
+
+#include <asm/ioctl.h>
+#include <asm/types.h>
+
+/* IOCTL commands. */
+
+#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
+#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
+#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
+#define OMAP_IO(num)		_IO('O', num)
+
+#define OMAPFB_MIRROR		OMAP_IOW(31, int)
+#define OMAPFB_SYNC_GFX		OMAP_IO(37)
+#define OMAPFB_VSYNC		OMAP_IO(38)
+#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
+#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
+#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
+#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
+#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
+#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
+#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
+#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
+#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
+#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
+#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
+#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
+#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
+
+#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
+#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
+#define OMAPFB_CAPS_PANEL_MASK		0xff000000
+
+#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
+#define OMAPFB_CAPS_TEARSYNC		0x00002000
+#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
+#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
+#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
+#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
+#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
+#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
+
+/* Values from DSP must map to lower 16-bits */
+#define OMAPFB_FORMAT_MASK		0x00ff
+#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
+#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
+#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
+#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
+#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
+
+#define OMAPFB_EVENT_READY	1
+#define OMAPFB_EVENT_DISABLED	2
+
+#define OMAPFB_MEMTYPE_SDRAM		0
+#define OMAPFB_MEMTYPE_SRAM		1
+#define OMAPFB_MEMTYPE_MAX		1
+
+enum omapfb_color_format {
+	OMAPFB_COLOR_RGB565 = 0,
+	OMAPFB_COLOR_YUV422,
+	OMAPFB_COLOR_YUV420,
+	OMAPFB_COLOR_CLUT_8BPP,
+	OMAPFB_COLOR_CLUT_4BPP,
+	OMAPFB_COLOR_CLUT_2BPP,
+	OMAPFB_COLOR_CLUT_1BPP,
+	OMAPFB_COLOR_RGB444,
+	OMAPFB_COLOR_YUY422,
+};
+
+struct omapfb_update_window {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+	__u32 out_x, out_y;
+	__u32 out_width, out_height;
+	__u32 reserved[8];
+};
+
+struct omapfb_update_window_old {
+	__u32 x, y;
+	__u32 width, height;
+	__u32 format;
+};
+
+enum omapfb_plane {
+	OMAPFB_PLANE_GFX = 0,
+	OMAPFB_PLANE_VID1,
+	OMAPFB_PLANE_VID2,
+};
+
+enum omapfb_channel_out {
+	OMAPFB_CHANNEL_OUT_LCD = 0,
+	OMAPFB_CHANNEL_OUT_DIGIT,
+};
+
+struct omapfb_plane_info {
+	__u32 pos_x;
+	__u32 pos_y;
+	__u8  enabled;
+	__u8  channel_out;
+	__u8  mirror;
+	__u8  reserved1;
+	__u32 out_width;
+	__u32 out_height;
+	__u32 reserved2[12];
+};
+
+struct omapfb_mem_info {
+	__u32 size;
+	__u8  type;
+	__u8  reserved[3];
+};
+
+struct omapfb_caps {
+	__u32 ctrl;
+	__u32 plane_color;
+	__u32 wnd_color;
+};
+
+enum omapfb_color_key_type {
+	OMAPFB_COLOR_KEY_DISABLED = 0,
+	OMAPFB_COLOR_KEY_GFX_DST,
+	OMAPFB_COLOR_KEY_VID_SRC,
+};
+
+struct omapfb_color_key {
+	__u8  channel_out;
+	__u32 background;
+	__u32 trans_key;
+	__u8  key_type;
+};
+
+enum omapfb_update_mode {
+	OMAPFB_UPDATE_DISABLED = 0,
+	OMAPFB_AUTO_UPDATE,
+	OMAPFB_MANUAL_UPDATE
+};
+
+#ifdef __KERNEL__
+
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/mutex.h>
+
+#include <mach/board.h>
+
+#define OMAP_LCDC_INV_VSYNC             0x0001
+#define OMAP_LCDC_INV_HSYNC             0x0002
+#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
+#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
+#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
+#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
+
+#define OMAP_LCDC_SIGNAL_MASK		0x003f
+
+#define OMAP_LCDC_PANEL_TFT		0x0100
+
+#define OMAPFB_PLANE_XRES_MIN		8
+#define OMAPFB_PLANE_YRES_MIN		8
+
+#ifdef CONFIG_ARCH_OMAP1
+#define OMAPFB_PLANE_NUM		1
+#else
+#define OMAPFB_PLANE_NUM		3
+#endif
+
+struct omapfb_device;
+
+struct lcd_panel {
+	const char	*name;
+	int		config;		/* TFT/STN, signal inversion */
+	int		bpp;		/* Pixel format in fb mem */
+	int		data_lines;	/* Lines on LCD HW interface */
+
+	int		x_res, y_res;
+	int		pixel_clock;	/* In kHz */
+	int		hsw;		/* Horizontal synchronization
+					   pulse width */
+	int		hfp;		/* Horizontal front porch */
+	int		hbp;		/* Horizontal back porch */
+	int		vsw;		/* Vertical synchronization
+					   pulse width */
+	int		vfp;		/* Vertical front porch */
+	int		vbp;		/* Vertical back porch */
+	int		acb;		/* ac-bias pin frequency */
+	int		pcd;		/* pixel clock divider.
+					   Obsolete use pixel_clock instead */
+
+	int		(*init)		(struct lcd_panel *panel,
+					 struct omapfb_device *fbdev);
+	void		(*cleanup)	(struct lcd_panel *panel);
+	int		(*enable)	(struct lcd_panel *panel);
+	void		(*disable)	(struct lcd_panel *panel);
+	unsigned long	(*get_caps)	(struct lcd_panel *panel);
+	int		(*set_bklight_level)(struct lcd_panel *panel,
+					     unsigned int level);
+	unsigned int	(*get_bklight_level)(struct lcd_panel *panel);
+	unsigned int	(*get_bklight_max)  (struct lcd_panel *panel);
+	int		(*run_test)	(struct lcd_panel *panel, int test_num);
+};
+
+struct extif_timings {
+	int cs_on_time;
+	int cs_off_time;
+	int we_on_time;
+	int we_off_time;
+	int re_on_time;
+	int re_off_time;
+	int we_cycle_time;
+	int re_cycle_time;
+	int cs_pulse_width;
+	int access_time;
+
+	int clk_div;
+
+	u32 tim[5];		/* set by extif->convert_timings */
+
+	int converted;
+};
+
+struct lcd_ctrl_extif {
+	int  (*init)		(struct omapfb_device *fbdev);
+	void (*cleanup)		(void);
+	void (*get_clk_info)	(u32 *clk_period, u32 *max_clk_div);
+	unsigned long (*get_max_tx_rate)(void);
+	int  (*convert_timings)	(struct extif_timings *timings);
+	void (*set_timings)	(const struct extif_timings *timings);
+	void (*set_bits_per_cycle)(int bpc);
+	void (*write_command)	(const void *buf, unsigned int len);
+	void (*read_data)	(void *buf, unsigned int len);
+	void (*write_data)	(const void *buf, unsigned int len);
+	void (*transfer_area)	(int width, int height,
+				 void (callback)(void * data), void *data);
+	int  (*setup_tearsync)	(unsigned pin_cnt,
+				 unsigned hs_pulse_time, unsigned vs_pulse_time,
+				 int hs_pol_inv, int vs_pol_inv, int div);
+	int  (*enable_tearsync) (int enable, unsigned line);
+
+	unsigned long		max_transmit_size;
+};
+
+struct omapfb_notifier_block {
+	struct notifier_block	nb;
+	void			*data;
+	int			plane_idx;
+};
+
+typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
+					  unsigned long event,
+					  void *fbi);
+
+struct omapfb_mem_region {
+	dma_addr_t	paddr;
+	void		*vaddr;
+	unsigned long	size;
+	u8		type;		/* OMAPFB_PLANE_MEM_* */
+	unsigned	alloc:1;	/* allocated by the driver */
+	unsigned	map:1;		/* kernel mapped by the driver */
+};
+
+struct omapfb_mem_desc {
+	int				region_cnt;
+	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
+};
+
+struct lcd_ctrl {
+	const char	*name;
+	void		*data;
+
+	int		(*init)		  (struct omapfb_device *fbdev,
+					   int ext_mode,
+					   struct omapfb_mem_desc *req_md);
+	void		(*cleanup)	  (void);
+	void		(*bind_client)	  (struct omapfb_notifier_block *nb);
+	void		(*get_caps)	  (int plane, struct omapfb_caps *caps);
+	int		(*set_update_mode)(enum omapfb_update_mode mode);
+	enum omapfb_update_mode (*get_update_mode)(void);
+	int		(*setup_plane)	  (int plane, int channel_out,
+					   unsigned long offset,
+					   int screen_width,
+					   int pos_x, int pos_y, int width,
+					   int height, int color_mode);
+	int		(*setup_mem)	  (int plane, size_t size,
+					   int mem_type, unsigned long *paddr);
+	int		(*mmap)		  (struct fb_info *info,
+					   struct vm_area_struct *vma);
+	int		(*set_scale)	  (int plane,
+					   int orig_width, int orig_height,
+					   int out_width, int out_height);
+	int		(*enable_plane)	  (int plane, int enable);
+	int		(*update_window)  (struct fb_info *fbi,
+					   struct omapfb_update_window *win,
+					   void (*callback)(void *),
+					   void *callback_data);
+	void		(*sync)		  (void);
+	void		(*suspend)	  (void);
+	void		(*resume)	  (void);
+	int		(*run_test)	  (int test_num);
+	int		(*setcolreg)	  (u_int regno, u16 red, u16 green,
+					   u16 blue, u16 transp,
+					   int update_hw_mem);
+	int		(*set_color_key)  (struct omapfb_color_key *ck);
+	int		(*get_color_key)  (struct omapfb_color_key *ck);
+};
+
+enum omapfb_state {
+	OMAPFB_DISABLED	= 0,
+	OMAPFB_SUSPENDED= 99,
+	OMAPFB_ACTIVE	= 100
+};
+
+struct omapfb_plane_struct {
+	int				idx;
+	struct omapfb_plane_info	info;
+	enum omapfb_color_format	color_mode;
+	struct omapfb_device		*fbdev;
+};
+
+struct omapfb_device {
+	int			state;
+	int                     ext_lcdc;               /* Using external
+                                                           LCD controller */
+	struct mutex		rqueue_mutex;
+
+	int			palette_size;
+	u32			pseudo_palette[17];
+
+	struct lcd_panel	*panel;			/* LCD panel */
+	struct lcd_ctrl         *ctrl;			/* LCD controller */
+	struct lcd_ctrl		*int_ctrl;		/* internal LCD ctrl */
+	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
+							   interface */
+	struct device		*dev;
+	struct fb_var_screeninfo	new_var;	/* for mode changes */
+
+	struct omapfb_mem_desc		mem_desc;
+	struct fb_info			*fb_info[OMAPFB_PLANE_NUM];
+};
+
+struct omapfb_platform_data {
+	struct omap_lcd_config		lcd;
+	struct omapfb_mem_desc		mem_desc;
+	void				*ctrl_platform_data;
+};
+
+#ifdef CONFIG_ARCH_OMAP1
+extern struct lcd_ctrl omap1_lcd_ctrl;
+#else
+extern struct lcd_ctrl omap2_disp_ctrl;
+#endif
+
+extern void omapfb_register_panel(struct lcd_panel *panel);
+extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
+extern void omapfb_notify_clients(struct omapfb_device *fbdev,
+				  unsigned long event);
+extern int  omapfb_register_client(struct omapfb_notifier_block *nb,
+				   omapfb_notifier_callback_t callback,
+				   void *callback_data);
+extern int  omapfb_unregister_client(struct omapfb_notifier_block *nb);
+extern int  omapfb_update_window_async(struct fb_info *fbi,
+				       struct omapfb_update_window *win,
+				       void (*callback)(void *),
+				       void *callback_data);
+
+/* in arch/arm/plat-omap/fb.c */
+extern void omapfb_set_ctrl_platform_data(void *pdata);
+
+#endif /* __KERNEL__ */
+
+#endif /* __OMAPFB_H */
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
new file mode 100644
index 000000000000..d57f20226b28
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -0,0 +1,21 @@
+/*
+ * arch/arm/plat-omap/include/mach/onenand.h
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/partitions.h>
+
+struct omap_onenand_platform_data {
+	int			cs;
+	int			gpio_irq;
+	struct mtd_partition	*parts;
+	int			nr_parts;
+	int                     (*onenand_setup)(void __iomem *);
+	int			dma_channel;
+};
diff --git a/arch/arm/plat-omap/include/mach/param.h b/arch/arm/plat-omap/include/mach/param.h
new file mode 100644
index 000000000000..1eb4dc326979
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/param.h
@@ -0,0 +1,8 @@
+/*
+ *  arch/arm/plat-omap/include/mach/param.h
+ *
+ */
+
+#ifdef CONFIG_OMAP_32K_TIMER_HZ
+#define HZ	CONFIG_OMAP_32K_TIMER_HZ
+#endif
diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h
new file mode 100644
index 000000000000..bfa09325a5ff
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/pm.h
@@ -0,0 +1,356 @@
+/*
+ * arch/arm/plat-omap/include/mach/pm.h
+ *
+ * Header file for OMAP Power Management Routines
+ *
+ * Author: MontaVista Software, Inc.
+ *	   support@mvista.com
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ *
+ * Cleanup 2004 for Linux 2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_PM_H
+#define __ASM_ARCH_OMAP_PM_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Register and offset definitions to be used in PM assembler code
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_ASM_BASE		io_p2v(0xfffece00)
+#define ARM_IDLECT1_ASM_OFFSET		0x04
+#define ARM_IDLECT2_ASM_OFFSET		0x08
+
+#define TCMIF_ASM_BASE			io_p2v(0xfffecc00)
+#define EMIFS_CONFIG_ASM_OFFSET		0x0c
+#define EMIFF_SDRAM_CONFIG_ASM_OFFSET	0x20
+
+/*
+ * ----------------------------------------------------------------------------
+ * Power management bitmasks
+ * ----------------------------------------------------------------------------
+ */
+#define IDLE_WAIT_CYCLES		0x00000fff
+#define PERIPHERAL_ENABLE		0x2
+
+#define SELF_REFRESH_MODE		0x0c000001
+#define IDLE_EMIFS_REQUEST		0xc
+#define MODEM_32K_EN			0x1
+#define PER_EN				0x1
+
+#define CPU_SUSPEND_SIZE		200
+#define ULPD_LOW_PWR_EN			0x0001
+#define ULPD_DEEP_SLEEP_TRANSITION_EN	0x0010
+#define ULPD_SETUP_ANALOG_CELL_3_VAL	0
+#define ULPD_POWER_CTRL_REG_VAL		0x0219
+
+#define DSP_IDLE_DELAY			10
+#define DSP_IDLE			0x0040
+#define DSP_RST				0x0004
+#define DSP_ENABLE			0x0002
+#define SUFFICIENT_DSP_RESET_TIME	1000
+#define DEFAULT_MPUI_CONFIG		0x05cf
+#define ENABLE_XORCLK			0x2
+#define DSP_CLOCK_ENABLE		0x2000
+#define DSP_IDLE_MODE			0x2
+#define TC_IDLE_REQUEST			(0x0000000c)
+
+#define IRQ_LEVEL2			(1<<0)
+#define IRQ_KEYBOARD			(1<<1)
+#define IRQ_UART2			(1<<15)
+
+#define PDE_BIT				0x08
+#define PWD_EN_BIT			0x04
+#define EN_PERCK_BIT			0x04
+
+#define OMAP1510_DEEP_SLEEP_REQUEST	0x0ec7
+#define OMAP1510_BIG_SLEEP_REQUEST	0x0cc5
+#define OMAP1510_IDLE_LOOP_REQUEST	0x0c00
+#define OMAP1510_IDLE_CLOCK_DOMAINS	0x2
+
+/* Both big sleep and deep sleep use same values. Difference is in ULPD. */
+#define OMAP1610_IDLECT1_SLEEP_VAL	0x13c7
+#define OMAP1610_IDLECT2_SLEEP_VAL	0x09c7
+#define OMAP1610_IDLECT3_VAL		0x3f
+#define OMAP1610_IDLECT3_SLEEP_ORMASK	0x2c
+#define OMAP1610_IDLECT3		0xfffece24
+#define OMAP1610_IDLE_LOOP_REQUEST	0x0400
+
+#define OMAP730_IDLECT1_SLEEP_VAL	0x16c7
+#define OMAP730_IDLECT2_SLEEP_VAL	0x09c7
+#define OMAP730_IDLECT3_VAL		0x3f
+#define OMAP730_IDLECT3		0xfffece24
+#define OMAP730_IDLE_LOOP_REQUEST	0x0C00
+
+#if     !defined(CONFIG_ARCH_OMAP730) && \
+	!defined(CONFIG_ARCH_OMAP15XX) && \
+	!defined(CONFIG_ARCH_OMAP16XX) && \
+	!defined(CONFIG_ARCH_OMAP24XX)
+#error "Power management for this processor not implemented yet"
+#endif
+
+#ifndef __ASSEMBLER__
+
+#include <linux/clk.h>
+
+extern void prevent_idle_sleep(void);
+extern void allow_idle_sleep(void);
+
+/**
+ * clk_deny_idle - Prevents the clock from being idled during MPU idle
+ * @clk: clock signal handle
+ */
+void clk_deny_idle(struct clk *clk);
+
+/**
+ * clk_allow_idle - Counters previous clk_deny_idle
+ * @clk: clock signal handle
+ */
+void clk_deny_idle(struct clk *clk);
+
+extern void omap_pm_idle(void);
+extern void omap_pm_suspend(void);
+extern void omap730_cpu_suspend(unsigned short, unsigned short);
+extern void omap1510_cpu_suspend(unsigned short, unsigned short);
+extern void omap1610_cpu_suspend(unsigned short, unsigned short);
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, u32 cpu_revision);
+extern void omap730_idle_loop_suspend(void);
+extern void omap1510_idle_loop_suspend(void);
+extern void omap1610_idle_loop_suspend(void);
+extern void omap24xx_idle_loop_suspend(void);
+
+extern unsigned int omap730_cpu_suspend_sz;
+extern unsigned int omap1510_cpu_suspend_sz;
+extern unsigned int omap1610_cpu_suspend_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap730_idle_loop_suspend_sz;
+extern unsigned int omap1510_idle_loop_suspend_sz;
+extern unsigned int omap1610_idle_loop_suspend_sz;
+extern unsigned int omap24xx_idle_loop_suspend_sz;
+
+#ifdef CONFIG_OMAP_SERIAL_WAKE
+extern void omap_serial_wake_trigger(int enable);
+#else
+#define omap_serial_wakeup_init()	{}
+#define omap_serial_wake_trigger(x)	{}
+#endif	/* CONFIG_OMAP_SERIAL_WAKE */
+
+#define ARM_SAVE(x) arm_sleep_save[ARM_SLEEP_SAVE_##x] = omap_readl(x)
+#define ARM_RESTORE(x) omap_writel((arm_sleep_save[ARM_SLEEP_SAVE_##x]), (x))
+#define ARM_SHOW(x) arm_sleep_save[ARM_SLEEP_SAVE_##x]
+
+#define DSP_SAVE(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x] = __raw_readw(x)
+#define DSP_RESTORE(x) __raw_writew((dsp_sleep_save[DSP_SLEEP_SAVE_##x]), (x))
+#define DSP_SHOW(x) dsp_sleep_save[DSP_SLEEP_SAVE_##x]
+
+#define ULPD_SAVE(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] = omap_readw(x)
+#define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
+#define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
+
+#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
+#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
+
+#define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
+#define MPUI1510_SHOW(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]
+
+#define MPUI1610_SAVE(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
+#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
+
+#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
+#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
+#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
+
+/*
+ * List of global OMAP registers to preserve.
+ * More ones like CP and general purpose register values are preserved
+ * with the stack pointer in sleep.S.
+ */
+
+enum arm_save_state {
+	ARM_SLEEP_SAVE_START = 0,
+	/*
+	 * MPU control registers 32 bits
+	 */
+	ARM_SLEEP_SAVE_ARM_CKCTL,
+	ARM_SLEEP_SAVE_ARM_IDLECT1,
+	ARM_SLEEP_SAVE_ARM_IDLECT2,
+	ARM_SLEEP_SAVE_ARM_IDLECT3,
+	ARM_SLEEP_SAVE_ARM_EWUPCT,
+	ARM_SLEEP_SAVE_ARM_RSTCT1,
+	ARM_SLEEP_SAVE_ARM_RSTCT2,
+	ARM_SLEEP_SAVE_ARM_SYSST,
+	ARM_SLEEP_SAVE_SIZE
+};
+
+enum dsp_save_state {
+	DSP_SLEEP_SAVE_START = 0,
+	/*
+	 * DSP registers 16 bits
+	 */
+	DSP_SLEEP_SAVE_DSP_IDLECT2,
+	DSP_SLEEP_SAVE_SIZE
+};
+
+enum ulpd_save_state {
+	ULPD_SLEEP_SAVE_START = 0,
+	/*
+	 * ULPD registers 16 bits
+	 */
+	ULPD_SLEEP_SAVE_ULPD_IT_STATUS,
+	ULPD_SLEEP_SAVE_ULPD_CLOCK_CTRL,
+	ULPD_SLEEP_SAVE_ULPD_SOFT_REQ,
+	ULPD_SLEEP_SAVE_ULPD_STATUS_REQ,
+	ULPD_SLEEP_SAVE_ULPD_DPLL_CTRL,
+	ULPD_SLEEP_SAVE_ULPD_POWER_CTRL,
+	ULPD_SLEEP_SAVE_SIZE
+};
+
+enum mpui1510_save_state {
+	MPUI1510_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI1510_SLEEP_SAVE_MPUI_CTRL,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI1510_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI1510_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI1510_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI1510_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI1510_SLEEP_SAVE_OMAP_IH2_MIR,
+#if defined(CONFIG_ARCH_OMAP15XX)
+	MPUI1510_SLEEP_SAVE_SIZE
+#else
+	MPUI1510_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum mpui730_save_state {
+	MPUI730_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI730_SLEEP_SAVE_MPUI_CTRL,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
+	MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
+#if defined(CONFIG_ARCH_OMAP730)
+	MPUI730_SLEEP_SAVE_SIZE
+#else
+	MPUI730_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum mpui1610_save_state {
+	MPUI1610_SLEEP_SAVE_START = 0,
+	/*
+	 * MPUI registers 32 bits
+	 */
+	MPUI1610_SLEEP_SAVE_MPUI_CTRL,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI1610_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI1610_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI1610_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI1610_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_0_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_1_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_2_MIR,
+	MPUI1610_SLEEP_SAVE_OMAP_IH2_3_MIR,
+#if defined(CONFIG_ARCH_OMAP16XX)
+	MPUI1610_SLEEP_SAVE_SIZE
+#else
+	MPUI1610_SLEEP_SAVE_SIZE = 0
+#endif
+};
+
+enum omap24xx_save_state {
+	OMAP24XX_SLEEP_SAVE_START = 0,
+	OMAP24XX_SLEEP_SAVE_INTC_MIR0,
+	OMAP24XX_SLEEP_SAVE_INTC_MIR1,
+	OMAP24XX_SLEEP_SAVE_INTC_MIR2,
+
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
+	OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
+
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
+	OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
+
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
+	OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
+
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
+	OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
+
+	OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
+	OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
+	OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
+	OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
+	OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
+	OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
+	OMAP24XX_SLEEP_SAVE_GPIO3_OE,
+	OMAP24XX_SLEEP_SAVE_GPIO4_OE,
+	OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
+	OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
+	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
+	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
+	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
+	OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
+	OMAP24XX_SLEEP_SAVE_SIZE
+};
+
+#endif /* ASSEMBLER */
+#endif /* __ASM_ARCH_OMAP_PM_H */
diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/mach/prcm.h
new file mode 100644
index 000000000000..56eba0fd6f6a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/prcm.h
@@ -0,0 +1,33 @@
+/*
+ * arch/arm/plat-omap/include/mach/prcm.h
+ *
+ * Access definations for use in OMAP24XX clock and power management
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_ARCH_DPM_PRCM_H
+#define __ASM_ARM_ARCH_DPM_PRCM_H
+
+u32 omap_prcm_get_reset_sources(void);
+
+#endif
+
+
+
+
+
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/mach/sdrc.h
new file mode 100644
index 000000000000..787b7acec546
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/sdrc.h
@@ -0,0 +1,75 @@
+#ifndef ____ASM_ARCH_SDRC_H
+#define ____ASM_ARCH_SDRC_H
+
+/*
+ * OMAP2/3 SDRC/SMS register definitions
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Copyright (C) 2007 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/io.h>
+
+/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
+
+#define SDRC_SYSCONFIG		0x010
+#define SDRC_DLLA_CTRL		0x060
+#define SDRC_DLLA_STATUS	0x064
+#define SDRC_DLLB_CTRL		0x068
+#define SDRC_DLLB_STATUS	0x06C
+#define SDRC_POWER		0x070
+#define SDRC_MR_0		0x084
+#define SDRC_RFR_CTRL_0		0x0a4
+
+/*
+ * These values represent the number of memory clock cycles between
+ * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
+ * rows per device, and include a subtraction of a 50 cycle window in the
+ * event that the autorefresh command is delayed due to other SDRC activity.
+ * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
+ * counter reaches 0.
+ *
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration.	A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define SDRC_RFR_CTRL_165MHz	(0x00044c00 | 1)
+#define SDRC_RFR_CTRL_133MHz	(0x0003de00 | 1)
+#define SDRC_RFR_CTRL_100MHz	(0x0002da01 | 1)
+#define SDRC_RFR_CTRL_110MHz	(0x0002da01 | 1) /* Need to calc */
+#define SDRC_RFR_CTRL_BYPASS	(0x00005000 | 1) /* Need to calc */
+
+
+/*
+ * SMS register access
+ */
+
+
+#define OMAP242X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg)	(void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+
+/* SMS register offsets - read/write with sms_{read,write}_reg() */
+
+#define SMS_SYSCONFIG		0x010
+/* REVISIT: fill in other SMS registers here */
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
new file mode 100644
index 000000000000..cc6bfa51ccb5
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -0,0 +1,37 @@
+/*
+ *  arch/arm/plat-omap/include/mach/serial.h
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#if defined(CONFIG_ARCH_OMAP1)
+/* OMAP1 serial ports */
+#define OMAP_UART1_BASE		0xfffb0000
+#define OMAP_UART2_BASE		0xfffb0800
+#define OMAP_UART3_BASE		0xfffb9800
+#elif defined(CONFIG_ARCH_OMAP2)
+/* OMAP2 serial ports */
+#define OMAP_UART1_BASE		0x4806a000
+#define OMAP_UART2_BASE		0x4806c000
+#define OMAP_UART3_BASE		0x4806e000
+#endif
+
+#define OMAP_MAX_NR_PORTS	3
+#define OMAP1510_BASE_BAUD	(12000000/16)
+#define OMAP16XX_BASE_BAUD	(48000000/16)
+
+#define is_omap_port(p)	({int __ret = 0;			\
+			if (p == IO_ADDRESS(OMAP_UART1_BASE) ||	\
+			    p == IO_ADDRESS(OMAP_UART2_BASE) ||	\
+			    p == IO_ADDRESS(OMAP_UART3_BASE))	\
+				__ret = 1;			\
+			__ret;					\
+			})
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/mach/sram.h
new file mode 100644
index 000000000000..e09323449981
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/sram.h
@@ -0,0 +1,56 @@
+/*
+ * arch/arm/plat-omap/include/mach/sram.h
+ *
+ * Interface for functions that need to be run in internal SRAM
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_SRAM_H
+#define __ARCH_ARM_OMAP_SRAM_H
+
+extern int __init omap_sram_init(void);
+extern void * omap_sram_push(void * start, unsigned long size);
+extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
+
+extern void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+				u32 base_cs, u32 force_unlock);
+extern void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+				      u32 mem_type);
+extern u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+/* Do not use these */
+extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap1_sram_reprogram_clock_sz;
+
+extern void omap24xx_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
+extern unsigned long omap24xx_sram_reprogram_clock_sz;
+
+extern void omap242x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+						u32 base_cs, u32 force_unlock);
+extern unsigned long omap242x_sram_ddr_init_sz;
+
+extern u32 omap242x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+						int bypass);
+extern unsigned long omap242x_sram_set_prcm_sz;
+
+extern void omap242x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+						u32 mem_type);
+extern unsigned long omap242x_sram_reprogram_sdrc_sz;
+
+
+extern void omap243x_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+						u32 base_cs, u32 force_unlock);
+extern unsigned long omap243x_sram_ddr_init_sz;
+
+extern u32 omap243x_sram_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val,
+						int bypass);
+extern unsigned long omap243x_sram_set_prcm_sz;
+
+extern void omap243x_sram_reprogram_sdrc(u32 perf_level, u32 dll_val,
+						u32 mem_type);
+extern unsigned long omap243x_sram_reprogram_sdrc_sz;
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/mach/system.h
new file mode 100644
index 000000000000..06a28c7b98de
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/system.h
@@ -0,0 +1,49 @@
+/*
+ * Copied from arch/arm/mach-sa1100/include/mach/system.h
+ * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+#include <linux/clk.h>
+
+#include <asm/mach-types.h>
+#include <mach/hardware.h>
+
+#ifndef CONFIG_MACH_VOICEBLUE
+#define voiceblue_reset()		do {} while (0)
+#endif
+
+extern void omap_prcm_arch_reset(char mode);
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void omap1_arch_reset(char mode)
+{
+	/*
+	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
+	 * "Global Software Reset Affects Traffic Controller Frequency".
+	 */
+	if (cpu_is_omap5912()) {
+		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4),
+				 DPLL_CTL);
+		omap_writew(0x8, ARM_RSTCT1);
+	}
+
+	if (machine_is_voiceblue())
+		voiceblue_reset();
+	else
+		omap_writew(1, ARM_RSTCT1);
+}
+
+static inline void arch_reset(char mode)
+{
+	if (!cpu_is_omap24xx())
+		omap1_arch_reset(mode);
+	else
+		omap_prcm_arch_reset(mode);
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/tc.h b/arch/arm/plat-omap/include/mach/tc.h
new file mode 100644
index 000000000000..d2fcd789bb9a
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/tc.h
@@ -0,0 +1,106 @@
+/*
+ * arch/arm/plat-omap/include/mach/tc.h
+ *
+ * OMAP Traffic Controller
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __ASM_ARCH_TC_H
+#define __ASM_ARCH_TC_H
+
+#define TCMIF_BASE		0xfffecc00
+#define OMAP_TC_OCPT1_PRIOR	(TCMIF_BASE + 0x00)
+#define OMAP_TC_EMIFS_PRIOR	(TCMIF_BASE + 0x04)
+#define OMAP_TC_EMIFF_PRIOR	(TCMIF_BASE + 0x08)
+#define EMIFS_CONFIG		(TCMIF_BASE + 0x0c)
+#define EMIFS_CS0_CONFIG	(TCMIF_BASE + 0x10)
+#define EMIFS_CS1_CONFIG	(TCMIF_BASE + 0x14)
+#define EMIFS_CS2_CONFIG	(TCMIF_BASE + 0x18)
+#define EMIFS_CS3_CONFIG	(TCMIF_BASE + 0x1c)
+#define EMIFF_SDRAM_CONFIG	(TCMIF_BASE + 0x20)
+#define EMIFF_MRS		(TCMIF_BASE + 0x24)
+#define TC_TIMEOUT1		(TCMIF_BASE + 0x28)
+#define TC_TIMEOUT2		(TCMIF_BASE + 0x2c)
+#define TC_TIMEOUT3		(TCMIF_BASE + 0x30)
+#define TC_ENDIANISM		(TCMIF_BASE + 0x34)
+#define EMIFF_SDRAM_CONFIG_2	(TCMIF_BASE + 0x3c)
+#define EMIF_CFG_DYNAMIC_WS	(TCMIF_BASE + 0x40)
+#define EMIFS_ACS0		(TCMIF_BASE + 0x50)
+#define EMIFS_ACS1		(TCMIF_BASE + 0x54)
+#define EMIFS_ACS2		(TCMIF_BASE + 0x58)
+#define EMIFS_ACS3		(TCMIF_BASE + 0x5c)
+#define OMAP_TC_OCPT2_PRIOR	(TCMIF_BASE + 0xd0)
+
+/* external EMIFS chipselect regions */
+#define	OMAP_CS0_PHYS		0x00000000
+#define	OMAP_CS0_SIZE		SZ_64M
+
+#define	OMAP_CS1_PHYS		0x04000000
+#define	OMAP_CS1_SIZE		SZ_64M
+
+#define	OMAP_CS1A_PHYS		OMAP_CS1_PHYS
+#define	OMAP_CS1A_SIZE		SZ_32M
+
+#define	OMAP_CS1B_PHYS		(OMAP_CS1A_PHYS + OMAP_CS1A_SIZE)
+#define	OMAP_CS1B_SIZE		SZ_32M
+
+#define	OMAP_CS2_PHYS		0x08000000
+#define	OMAP_CS2_SIZE		SZ_64M
+
+#define	OMAP_CS2A_PHYS		OMAP_CS2_PHYS
+#define	OMAP_CS2A_SIZE		SZ_32M
+
+#define	OMAP_CS2B_PHYS		(OMAP_CS2A_PHYS + OMAP_CS2A_SIZE)
+#define	OMAP_CS2B_SIZE		SZ_32M
+
+#define	OMAP_CS3_PHYS		0x0c000000
+#define	OMAP_CS3_SIZE		SZ_64M
+
+#ifndef	__ASSEMBLER__
+
+/* EMIF Slow Interface Configuration Register */
+#define OMAP_EMIFS_CONFIG_FR		(1 << 4)
+#define OMAP_EMIFS_CONFIG_PDE		(1 << 3)
+#define OMAP_EMIFS_CONFIG_PWD_EN	(1 << 2)
+#define OMAP_EMIFS_CONFIG_BM		(1 << 1)
+#define OMAP_EMIFS_CONFIG_WP		(1 << 0)
+
+#define EMIFS_CCS(n)		(EMIFS_CS0_CONFIG + (4 * (n)))
+#define EMIFS_ACS(n)		(EMIFS_ACS0 + (4 * (n)))
+
+/* Almost all documentation for chip and board memory maps assumes
+ * BM is clear.  Most devel boards have a switch to control booting
+ * from NOR flash (using external chipselect 3) rather than mask ROM,
+ * which uses BM to interchange the physical CS0 and CS3 addresses.
+ */
+static inline u32 omap_cs0_phys(void)
+{
+	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+			?  OMAP_CS3_PHYS : 0;
+}
+
+static inline u32 omap_cs3_phys(void)
+{
+	return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+			? 0 : OMAP_CS3_PHYS;
+}
+
+#endif	/* __ASSEMBLER__ */
+
+#endif	/* __ASM_ARCH_TC_H */
diff --git a/arch/arm/plat-omap/include/mach/timex.h b/arch/arm/plat-omap/include/mach/timex.h
new file mode 100644
index 000000000000..6d35767bc48f
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/timex.h
@@ -0,0 +1,41 @@
+/*
+ * arch/arm/plat-omap/include/mach/timex.h
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author:  Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#if !defined(__ASM_ARCH_OMAP_TIMEX_H)
+#define __ASM_ARCH_OMAP_TIMEX_H
+
+/*
+ * OMAP 32KHz timer updates time one jiffie at a time from a secondary timer,
+ * and that's why the CLOCK_TICK_RATE is not 32768.
+ */
+#ifdef CONFIG_OMAP_32K_TIMER
+#define CLOCK_TICK_RATE		(CONFIG_OMAP_32K_TIMER_HZ)
+#else
+#define CLOCK_TICK_RATE		(HZ * 100000UL)
+#endif
+
+#endif /* __ASM_ARCH_OMAP_TIMEX_H */
diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h
new file mode 100644
index 000000000000..0814c5f210c3
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/uncompress.h
@@ -0,0 +1,83 @@
+/*
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+#include <mach/serial.h>
+
+unsigned int system_rev;
+
+#define UART_OMAP_MDR1		0x08	/* mode definition register */
+#define OMAP_ID_730		0x355F
+#define ID_MASK			0x7fff
+#define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
+#define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
+
+static void putc(int c)
+{
+	volatile u8 * uart = 0;
+	int shift = 2;
+
+#ifdef CONFIG_MACH_OMAP_PALMTE
+	return;
+#endif
+
+#ifdef CONFIG_ARCH_OMAP
+#ifdef	CONFIG_OMAP_LL_DEBUG_UART3
+	uart = (volatile u8 *)(OMAP_UART3_BASE);
+#elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
+	uart = (volatile u8 *)(OMAP_UART2_BASE);
+#else
+	uart = (volatile u8 *)(OMAP_UART1_BASE);
+#endif
+
+#ifdef CONFIG_ARCH_OMAP1
+	/* Determine which serial port to use */
+	do {
+		/* MMU is not on, so cpu_is_omapXXXX() won't work here */
+		unsigned int omap_id = omap_get_id();
+
+		if (omap_id == OMAP_ID_730)
+			shift = 0;
+
+		if (check_port(uart, shift))
+			break;
+		/* Silent boot if no serial ports are enabled. */
+		return;
+	} while (0);
+#endif /* CONFIG_ARCH_OMAP1 */
+#endif
+
+	/*
+	 * Now, xmit each character
+	 */
+	while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+		barrier();
+	uart[UART_TX << shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/mach/usb.h
new file mode 100644
index 000000000000..a56a610950c2
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/usb.h
@@ -0,0 +1,141 @@
+// include/asm-arm/mach-omap/usb.h
+
+#ifndef	__ASM_ARCH_OMAP_USB_H
+#define	__ASM_ARCH_OMAP_USB_H
+
+#include <mach/board.h>
+
+/*-------------------------------------------------------------------------*/
+
+#define OMAP1_OTG_BASE			0xfffb0400
+#define OMAP1_UDC_BASE			0xfffb4000
+#define OMAP1_OHCI_BASE			0xfffba000
+
+#define OMAP2_OHCI_BASE			0x4805e000
+#define OMAP2_UDC_BASE			0x4805e200
+#define OMAP2_OTG_BASE			0x4805e300
+
+#ifdef CONFIG_ARCH_OMAP1
+
+#define OTG_BASE			OMAP1_OTG_BASE
+#define UDC_BASE			OMAP1_UDC_BASE
+#define OMAP_OHCI_BASE			OMAP1_OHCI_BASE
+
+#else
+
+#define OTG_BASE			OMAP2_OTG_BASE
+#define UDC_BASE			OMAP2_UDC_BASE
+#define OMAP_OHCI_BASE			OMAP2_OHCI_BASE
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * OTG and transceiver registers, for OMAPs starting with ARM926
+ */
+#define OTG_REV				(OTG_BASE + 0x00)
+#define OTG_SYSCON_1			(OTG_BASE + 0x04)
+#	define	 USB2_TRX_MODE(w)	(((w)>>24)&0x07)
+#	define	 USB1_TRX_MODE(w)	(((w)>>20)&0x07)
+#	define	 USB0_TRX_MODE(w)	(((w)>>16)&0x07)
+#	define	 OTG_IDLE_EN		(1 << 15)
+#	define	 HST_IDLE_EN		(1 << 14)
+#	define	 DEV_IDLE_EN		(1 << 13)
+#	define	 OTG_RESET_DONE		(1 << 2)
+#	define	 OTG_SOFT_RESET		(1 << 1)
+#define OTG_SYSCON_2			(OTG_BASE + 0x08)
+#	define	 OTG_EN			(1 << 31)
+#	define	 USBX_SYNCHRO		(1 << 30)
+#	define	 OTG_MST16		(1 << 29)
+#	define	 SRP_GPDATA		(1 << 28)
+#	define	 SRP_GPDVBUS		(1 << 27)
+#	define	 SRP_GPUVBUS(w)		(((w)>>24)&0x07)
+#	define	 A_WAIT_VRISE(w)	(((w)>>20)&0x07)
+#	define	 B_ASE_BRST(w)		(((w)>>16)&0x07)
+#	define	 SRP_DPW		(1 << 14)
+#	define	 SRP_DATA		(1 << 13)
+#	define	 SRP_VBUS		(1 << 12)
+#	define	 OTG_PADEN		(1 << 10)
+#	define	 HMC_PADEN		(1 << 9)
+#	define	 UHOST_EN		(1 << 8)
+#	define	 HMC_TLLSPEED		(1 << 7)
+#	define	 HMC_TLLATTACH		(1 << 6)
+#	define	 OTG_HMC(w)		(((w)>>0)&0x3f)
+#define OTG_CTRL			(OTG_BASE + 0x0c)
+#	define	 OTG_USB2_EN		(1 << 29)
+#	define	 OTG_USB2_DP		(1 << 28)
+#	define	 OTG_USB2_DM		(1 << 27)
+#	define	 OTG_USB1_EN		(1 << 26)
+#	define	 OTG_USB1_DP		(1 << 25)
+#	define	 OTG_USB1_DM		(1 << 24)
+#	define	 OTG_USB0_EN		(1 << 23)
+#	define	 OTG_USB0_DP		(1 << 22)
+#	define	 OTG_USB0_DM		(1 << 21)
+#	define	 OTG_ASESSVLD		(1 << 20)
+#	define	 OTG_BSESSEND		(1 << 19)
+#	define	 OTG_BSESSVLD		(1 << 18)
+#	define	 OTG_VBUSVLD		(1 << 17)
+#	define	 OTG_ID			(1 << 16)
+#	define	 OTG_DRIVER_SEL		(1 << 15)
+#	define	 OTG_A_SETB_HNPEN	(1 << 12)
+#	define	 OTG_A_BUSREQ		(1 << 11)
+#	define	 OTG_B_HNPEN		(1 << 9)
+#	define	 OTG_B_BUSREQ		(1 << 8)
+#	define	 OTG_BUSDROP		(1 << 7)
+#	define	 OTG_PULLDOWN		(1 << 5)
+#	define	 OTG_PULLUP		(1 << 4)
+#	define	 OTG_DRV_VBUS		(1 << 3)
+#	define	 OTG_PD_VBUS		(1 << 2)
+#	define	 OTG_PU_VBUS		(1 << 1)
+#	define	 OTG_PU_ID		(1 << 0)
+#define OTG_IRQ_EN			(OTG_BASE + 0x10)	/* 16-bit */
+#	define	 DRIVER_SWITCH		(1 << 15)
+#	define	 A_VBUS_ERR		(1 << 13)
+#	define	 A_REQ_TMROUT		(1 << 12)
+#	define	 A_SRP_DETECT		(1 << 11)
+#	define	 B_HNP_FAIL		(1 << 10)
+#	define	 B_SRP_TMROUT		(1 << 9)
+#	define	 B_SRP_DONE		(1 << 8)
+#	define	 B_SRP_STARTED		(1 << 7)
+#	define	 OPRT_CHG		(1 << 0)
+#define OTG_IRQ_SRC			(OTG_BASE + 0x14)	/* 16-bit */
+	// same bits as in IRQ_EN
+#define OTG_OUTCTRL			(OTG_BASE + 0x18)	/* 16-bit */
+#	define	 OTGVPD			(1 << 14)
+#	define	 OTGVPU			(1 << 13)
+#	define	 OTGPUID		(1 << 12)
+#	define	 USB2VDR		(1 << 10)
+#	define	 USB2PDEN		(1 << 9)
+#	define	 USB2PUEN		(1 << 8)
+#	define	 USB1VDR		(1 << 6)
+#	define	 USB1PDEN		(1 << 5)
+#	define	 USB1PUEN		(1 << 4)
+#	define	 USB0VDR		(1 << 2)
+#	define	 USB0PDEN		(1 << 1)
+#	define	 USB0PUEN		(1 << 0)
+#define OTG_TEST			(OTG_BASE + 0x20)	/* 16-bit */
+#define OTG_VENDOR_CODE			(OTG_BASE + 0xfc)	/* 16-bit */
+
+/*-------------------------------------------------------------------------*/
+
+/* OMAP1 */
+#define	USB_TRANSCEIVER_CTRL		(0xfffe1000 + 0x0064)
+#	define	CONF_USB2_UNI_R		(1 << 8)
+#	define	CONF_USB1_UNI_R		(1 << 7)
+#	define	CONF_USB_PORT0_R(x)	(((x)>>4)&0x7)
+#	define	CONF_USB0_ISOLATE_R	(1 << 3)
+#	define	CONF_USB_PWRDN_DM_R	(1 << 2)
+#	define	CONF_USB_PWRDN_DP_R	(1 << 1)
+
+/* OMAP2 */
+#	define	USB_UNIDIR			0x0
+#	define	USB_UNIDIR_TLL			0x1
+#	define	USB_BIDIR			0x2
+#	define	USB_BIDIR_TLL			0x3
+#	define	USBTXWRMODEI(port, x)	((x) << (22 - (port * 2)))
+#	define	USBT2TLL5PI		(1 << 17)
+#	define	USB0PUENACTLOI		(1 << 16)
+#	define	USBSTANDBYCTRL		(1 << 15)
+
+#endif	/* __ASM_ARCH_OMAP_USB_H */
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
new file mode 100644
index 000000000000..dc104cd96197
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
@@ -0,0 +1,21 @@
+/*
+ *  arch/arm/plat-omap/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
+
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 6f33f58bca45..1d7aec1a691a 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -31,7 +31,7 @@
 #include <linux/err.h>
 #include <linux/delay.h>
 #include <asm/io.h>
-#include <asm/arch/mailbox.h>
+#include <mach/mailbox.h>
 #include "mailbox.h"
 
 static struct omap_mbox *mboxes;
@@ -334,7 +334,7 @@ static int omap_mbox_init(struct omap_mbox *mbox)
 	}
 
 	mbox->dev.class = &omap_mbox_class;
-	strlcpy(mbox->dev.bus_id, mbox->name, KOBJ_NAME_LEN);
+	dev_set_name(&mbox->dev, "%s", mbox->name);
 	dev_set_drvdata(&mbox->dev, mbox);
 
 	ret = device_register(&mbox->dev);
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index c7f74064696c..d0844050f2d2 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -24,8 +24,8 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 
-#include <asm/arch/dma.h>
-#include <asm/arch/mcbsp.h>
+#include <mach/dma.h>
+#include <mach/mcbsp.h>
 
 static struct omap_mcbsp mcbsp[OMAP_MAX_MCBSP_COUNT];
 
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 6f3f459731c8..847df208c46c 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -28,7 +28,7 @@
 #include <asm/system.h>
 #include <asm/io.h>
 #include <linux/spinlock.h>
-#include <asm/arch/mux.h>
+#include <mach/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
diff --git a/arch/arm/plat-omap/ocpi.c b/arch/arm/plat-omap/ocpi.c
index b5d307026c82..8bdbf979a257 100644
--- a/arch/arm/plat-omap/ocpi.c
+++ b/arch/arm/plat-omap/ocpi.c
@@ -33,7 +33,7 @@
 #include <linux/clk.h>
 
 #include <asm/io.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
 #define OCPI_BASE		0xfffec320
 #define OCPI_FAULT		(OCPI_BASE + 0x00)
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 554ee58e1294..ac67eeb6ca6a 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -22,10 +22,10 @@
 
 #include <asm/mach/map.h>
 
-#include <asm/arch/sram.h>
-#include <asm/arch/board.h>
+#include <mach/sram.h>
+#include <mach/board.h>
 
-#include <asm/arch/control.h>
+#include <mach/control.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/prm.h"
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 2699c16d4da0..777485e0636b 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -31,12 +31,12 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/system.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/control.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/usb.h>
-#include <asm/arch/board.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/board.h>
 
 #ifdef CONFIG_ARCH_OMAP1
 
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 93c4ef9f0067..544d6b327f3a 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -16,7 +16,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/hardware.h>
+#include <mach/hardware.h>
 
 /*
  * Number of timer ticks per jiffy.
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 5e28c217b8c2..0af3872fb763 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -9,7 +9,7 @@ config PLAT_S3C24XX
 	depends on ARCH_S3C2410
 	default y if ARCH_S3C2410
 	select NO_IOPORT
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	help
 	  Base platform code for any Samsung S3C24XX device
 
diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c
index 3ac8d8d781b3..54d4b8e2263c 100644
--- a/arch/arm/plat-s3c24xx/clock.c
+++ b/arch/arm/plat-s3c24xx/clock.c
@@ -40,12 +40,12 @@
 #include <linux/mutex.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index 398c7ac25296..1863a1b1bc49 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -31,12 +31,12 @@
 #include <asm/mach/irq.h>
 
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/leds-gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/leds-gpio.h>
 
 #include <asm/plat-s3c/nand.h>
 
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index f5699cadb0c3..6d60f0476bb8 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -30,7 +30,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/delay.h>
@@ -39,9 +39,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/system-reset.h>
+#include <mach/system-reset.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index eea3b32ff798..d6fb76578b11 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -23,8 +23,8 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/fb.h>
-#include <asm/hardware.h>
+#include <mach/fb.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 60f162dc4fad..08c2aaf14c41 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -29,12 +29,12 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/dma.h>
 
 #include <asm/mach/dma.h>
-#include <asm/arch/map.h>
+#include <mach/map.h>
 
 #include <asm/plat-s3c24xx/dma.h>
 
@@ -1304,7 +1304,7 @@ struct sysdev_class dma_sysclass = {
 
 /* kmem cache implementation */
 
-static void s3c2410_dma_cache_ctor(struct kmem_cache *c, void *p)
+static void s3c2410_dma_cache_ctor(void *p)
 {
 	memset(p, 0, sizeof(struct s3c2410_dma_buf));
 }
diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c
index ee99dcc7f0bd..dd27334e3d7e 100644
--- a/arch/arm/plat-s3c24xx/gpio.c
+++ b/arch/arm/plat-s3c24xx/gpio.c
@@ -27,11 +27,11 @@
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
 {
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 825d8d0c5ca2..849f8469714a 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -19,10 +19,10 @@
 #include <linux/io.h>
 #include <linux/gpio.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-gpio.h>
 
 struct s3c24xx_gpio_chip {
 	struct gpio_chip	chip;
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index ae2c5d7efc9d..36cefe176835 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -56,14 +56,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
@@ -292,27 +292,27 @@ s3c_irqext_type(unsigned int irq, unsigned int type)
 	/* Set the external interrupt to pointed trigger type */
 	switch (type)
 	{
-		case IRQT_NOEDGE:
+		case IRQ_TYPE_NONE:
 			printk(KERN_WARNING "No edge setting!\n");
 			break;
 
-		case IRQT_RISING:
+		case IRQ_TYPE_EDGE_RISING:
 			newvalue = S3C2410_EXTINT_RISEEDGE;
 			break;
 
-		case IRQT_FALLING:
+		case IRQ_TYPE_EDGE_FALLING:
 			newvalue = S3C2410_EXTINT_FALLEDGE;
 			break;
 
-		case IRQT_BOTHEDGE:
+		case IRQ_TYPE_EDGE_BOTH:
 			newvalue = S3C2410_EXTINT_BOTHEDGE;
 			break;
 
-		case IRQT_LOW:
+		case IRQ_TYPE_LEVEL_LOW:
 			newvalue = S3C2410_EXTINT_LOWLEV;
 			break;
 
-		case IRQT_HIGH:
+		case IRQ_TYPE_LEVEL_HIGH:
 			newvalue = S3C2410_EXTINT_HILEV;
 			break;
 
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index cb0b3a4ccf1b..e6705014b2a0 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -24,12 +24,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
-#include <asm/arch/map.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/map.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
 
 #include <asm/mach-types.h>
 
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index bf5581a9aeea..fc4b731a949c 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -37,14 +37,14 @@
 #include <linux/serial_core.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-mem.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-mem.h>
+#include <mach/regs-irq.h>
 
 #include <asm/mach/time.h>
 
diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c
index 2cda3e3c6786..ccfdc9d7ae4b 100644
--- a/arch/arm/plat-s3c24xx/pwm-clock.c
+++ b/arch/arm/plat-s3c24xx/pwm-clock.c
@@ -18,11 +18,11 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index faf3e0f9f4e2..8a5fffde6631 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -34,12 +34,12 @@
 #include <linux/mutex.h>
 #include <linux/clk.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/atomic.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 
 #include <asm/plat-s3c24xx/clock.h>
 #include <asm/plat-s3c24xx/cpu.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
index 2dbb2606d448..f3dc38cf1de4 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -25,14 +25,14 @@
 #include <linux/ioport.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 
 #include <asm/mach/irq.h>
 
-#include <asm/arch/regs-irq.h>
-#include <asm/arch/regs-gpio.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
 
 #include <asm/plat-s3c24xx/cpu.h>
 #include <asm/plat-s3c24xx/pm.h>
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index 2f01af5f64c4..281b4804ed38 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -25,15 +25,15 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-clock.h>
+#include <mach/regs-clock.h>
 #include <asm/plat-s3c/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/regs-dsc.h>
 
 #include <asm/plat-s3c24xx/s3c2410.h>
 #include <asm/plat-s3c24xx/s3c2440.h>
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index a646cbe8244c..4981a08b6ebb 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -26,12 +26,12 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
-#include <asm/arch/map.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
 
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-mem.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-mem.h>
 #include <asm/plat-s3c/regs-serial.h>
 
 /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c24xx/time.c
index 766473b3f98b..b471a21ae2e4 100644
--- a/arch/arm/plat-s3c24xx/time.c
+++ b/arch/arm/plat-s3c24xx/time.c
@@ -32,9 +32,9 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/arch/map.h>
+#include <mach/map.h>
 #include <asm/plat-s3c/regs-timer.h>
-#include <asm/arch/regs-irq.h>
+#include <mach/regs-irq.h>
 #include <asm/mach/time.h>
 
 #include <asm/plat-s3c24xx/clock.h>
diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile
index c2a4993a724c..1dbaa29ac4d7 100644
--- a/arch/arm/tools/Makefile
+++ b/arch/arm/tools/Makefile
@@ -6,4 +6,5 @@
 
 include/asm-arm/mach-types.h: $(src)/gen-mach-types $(src)/mach-types
 	@echo '  Generating $@'
+	@mkdir -p $(dir $@)
 	$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 0be5630ff568..8b8f564c3aa2 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Mon Jul 7 16:25:39 2008
+# Last update: Sun Jul 13 12:04:05 2008
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1812,3 +1812,11 @@ jade			MACH_JADE		JADE			1821
 ks8695_softplc		MACH_KS8695_SOFTPLC	KS8695_SOFTPLC		1822
 gprisc4			MACH_GPRISC4		GPRISC4			1823
 stamp9260		MACH_STAMP9260		STAMP9260		1824
+smdk6430		MACH_SMDK6430		SMDK6430		1825
+smdkc100		MACH_SMDKC100		SMDKC100		1826
+tavorevb		MACH_TAVOREVB		TAVOREVB		1827
+saar			MACH_SAAR		SAAR			1828
+deister_eyecam		MACH_DEISTER_EYECAM	DEISTER_EYECAM		1829
+at91sam9m10ek		MACH_AT91SAM9M10EK	AT91SAM9M10EK		1830
+linkstation_produo	MACH_LINKSTATION_PRODUO	LINKSTATION_PRODUO	1831
+hit_b0			MACH_HIT_B0		HIT_B0			1832
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 32455c633f1c..c0d2c9bb952b 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -352,7 +352,7 @@ static int __init vfp_init(void)
 	else if (vfpsid & FPSID_NODOUBLE) {
 		printk("no double precision support\n");
 	} else {
-		smp_call_function(vfp_enable, NULL, 1, 1);
+		smp_call_function(vfp_enable, NULL, 1);
 
 		VFP_arch = (vfpsid & FPSID_ARCH_MASK) >> FPSID_ARCH_BIT;  /* Extract the architecture version */
 		printk("implementor %02x architecture %d part %02x variant %x rev %x\n",
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 45d63c986015..7c239a916275 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -10,6 +10,7 @@ config AVR32
 	# With EMBEDDED=n, we get lots of stuff automatically selected
 	# that we usually don't need on AVR32.
 	select EMBEDDED
+	select HAVE_CLK
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
 	help
@@ -87,7 +88,7 @@ config PLATFORM_AT32AP
 	select SUBARCH_AVR32B
 	select MMU
 	select PERFORMANCE_COUNTERS
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_ALLOCATOR
 
 #
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
index 17a3529341dd..5b46433d53a5 100644
--- a/arch/avr32/Makefile
+++ b/arch/avr32/Makefile
@@ -23,9 +23,14 @@ KBUILD_AFLAGS	+= $(cpuflags-y)
 
 CHECKFLAGS	+= -D__avr32__ -D__BIG_ENDIAN
 
+machine-$(CONFIG_PLATFORM_AT32AP) := at32ap
+machdirs	:= $(patsubst %,arch/avr32/mach-%/, $(machine-y))
+
+KBUILD_CPPFLAGS	+= $(patsubst %,-I$(srctree)/%include,$(machdirs))
+
 head-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/head.o
 head-y					+= arch/avr32/kernel/head.o
-core-$(CONFIG_PLATFORM_AT32AP)		+= arch/avr32/mach-at32ap/
+core-y					+= $(machdirs)
 core-$(CONFIG_BOARD_ATSTK1000)		+= arch/avr32/boards/atstk1000/
 core-$(CONFIG_BOARD_ATNGW100)		+= arch/avr32/boards/atngw100/
 core-$(CONFIG_LOADER_U_BOOT)		+= arch/avr32/boot/u-boot/
diff --git a/arch/avr32/boards/atngw100/flash.c b/arch/avr32/boards/atngw100/flash.c
index b07ae63aa548..55ccc9ce4892 100644
--- a/arch/avr32/boards/atngw100/flash.c
+++ b/arch/avr32/boards/atngw100/flash.c
@@ -13,7 +13,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 static struct smc_timing flash_timing __initdata = {
 	.ncs_read_setup		= 0,
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index a51bb9fb3c89..670c87b2db12 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -19,13 +19,14 @@
 #include <linux/leds.h>
 #include <linux/spi/spi.h>
 
+#include <asm/atmel-mci.h>
 #include <asm/io.h>
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
 
 /* Oscillator frequencies. These are board-specific */
 unsigned long at32_board_osc_rates[3] = {
@@ -51,6 +52,11 @@ static struct spi_board_info spi0_board_info[] __initdata = {
 	},
 };
 
+static struct mci_platform_data __initdata mci0_data = {
+	.detect_pin	= GPIO_PIN_PC(25),
+	.wp_pin		= GPIO_PIN_PE(0),
+};
+
 /*
  * The next two functions should go away as the boot loader is
  * supposed to initialize the macb address registers with a valid
@@ -170,6 +176,7 @@ static int __init atngw100_init(void)
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
 
 	at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
+	at32_add_device_mci(0, &mci0_data);
 	at32_add_device_usba(0, NULL);
 
 	for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig
index af90b00100fd..8dc48214f0b7 100644
--- a/arch/avr32/boards/atstk1000/Kconfig
+++ b/arch/avr32/boards/atstk1000/Kconfig
@@ -18,6 +18,10 @@ config BOARD_ATSTK1004
 	bool "ATSTK1004"
 	select CPU_AT32AP7002
 
+config BOARD_ATSTK1006
+	bool "ATSTK1006"
+	select CPU_AT32AP7000
+
 endchoice
 
 
diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile
index beead86462e8..edecee03742d 100644
--- a/arch/avr32/boards/atstk1000/Makefile
+++ b/arch/avr32/boards/atstk1000/Makefile
@@ -2,3 +2,4 @@ obj-y				+= setup.o flash.o
 obj-$(CONFIG_BOARD_ATSTK1002)	+= atstk1002.o
 obj-$(CONFIG_BOARD_ATSTK1003)	+= atstk1003.o
 obj-$(CONFIG_BOARD_ATSTK1004)	+= atstk1004.o
+obj-$(CONFIG_BOARD_ATSTK1006)	+= atstk1002.o
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 86b363c1c25b..b33542b97563 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -1,7 +1,7 @@
 /*
- * ATSTK1002 daughterboard-specific init code
+ * ATSTK1002/ATSTK1006 daughterboard-specific init code
  *
- * Copyright (C) 2005-2006 Atmel Corporation
+ * Copyright (C) 2005-2007 Atmel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -21,10 +21,12 @@
 
 #include <asm/io.h>
 #include <asm/setup.h>
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <asm/atmel-mci.h>
+
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
 
 #include "atstk1000.h"
 
@@ -35,6 +37,74 @@ unsigned long at32_board_osc_rates[3] = {
 	[2] = 12000000,	/* 12 MHz on osc1 */
 };
 
+/*
+ * The ATSTK1006 daughterboard is very similar to the ATSTK1002. Both
+ * have the AT32AP7000 chip on board; the difference is that the
+ * STK1006 has 128 MB SDRAM (the STK1002 uses the 8 MB SDRAM chip on
+ * the STK1000 motherboard) and 256 MB NAND flash (the STK1002 has
+ * none.)
+ *
+ * The RAM difference is handled by the boot loader, so the only
+ * difference we end up handling here is the NAND flash.
+ */
+#ifdef CONFIG_BOARD_ATSTK1006
+#include <linux/mtd/partitions.h>
+#include <mach/smc.h>
+
+static struct smc_timing nand_timing __initdata = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 10,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 10,
+
+	.ncs_read_pulse		= 30,
+	.nrd_pulse		= 15,
+	.ncs_write_pulse	= 30,
+	.nwe_pulse		= 15,
+
+	.read_cycle		= 30,
+	.write_cycle		= 30,
+
+	.ncs_read_recover	= 0,
+	.nrd_recover		= 15,
+	.ncs_write_recover	= 0,
+	/* WE# high -> RE# low min 60 ns */
+	.nwe_recover		= 50,
+};
+
+static struct smc_config nand_config __initdata = {
+	.bus_width		= 1,
+	.nrd_controlled		= 1,
+	.nwe_controlled		= 1,
+	.nwait_mode		= 0,
+	.byte_write		= 0,
+	.tdf_cycles		= 2,
+	.tdf_mode		= 0,
+};
+
+static struct mtd_partition nand_partitions[] = {
+	{
+		.name		= "main",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition *nand_part_info(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(nand_partitions);
+	return nand_partitions;
+}
+
+struct atmel_nand_data atstk1006_nand_data __initdata = {
+	.cle		= 21,
+	.ale		= 22,
+	.rdy_pin	= GPIO_PIN_PB(30),
+	.enable_pin	= GPIO_PIN_PB(29),
+	.partition_info	= nand_part_info,
+};
+#endif
+
 struct eth_addr {
 	u8 addr[6];
 };
@@ -192,6 +262,21 @@ void __init setup_board(void)
 	at32_setup_serial_console(0);
 }
 
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+
+/* MMC card detect requires MACB0 *NOT* be used */
+#ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+	.detect_pin	= GPIO_PIN_PC(14),	/* gpio30/sdcd */
+	.wp_pin		= GPIO_PIN_PC(15),	/* gpio31/sdwp */
+};
+#define MCI_PDATA	&mci0_data
+#else
+#define MCI_PDATA	NULL
+#endif	/* SW6 for sd{cd,wp} routing */
+
+#endif	/* SW2 for MMC signal routing */
+
 static int __init atstk1002_init(void)
 {
 	/*
@@ -218,6 +303,12 @@ static int __init atstk1002_init(void)
 
 	at32_add_system_devices();
 
+#ifdef CONFIG_BOARD_ATSTK1006
+	smc_set_timing(&nand_config, &nand_timing);
+	smc_set_configuration(3, &nand_config);
+	at32_add_device_nand(0, &atstk1006_nand_data);
+#endif
+
 #ifdef	CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
 	at32_add_device_usart(1);
 #else
@@ -234,6 +325,9 @@ static int __init atstk1002_init(void)
 #ifdef CONFIG_BOARD_ATSTK100X_SPI1
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
+#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+	at32_add_device_mci(0, MCI_PDATA);
+#endif
 #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
 #else
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index ea109f435a83..0cf664174c17 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -20,10 +20,10 @@
 
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
 
 #include "atstk1000.h"
 
@@ -154,7 +154,7 @@ static int __init atstk1003_init(void)
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_mci(0);
+	at32_add_device_mci(0, NULL);
 #endif
 	at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index c7236df74d74..50a5273e5916 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -22,10 +22,10 @@
 
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/init.h>
+#include <mach/portmux.h>
 
 #include "atstk1000.h"
 
@@ -137,7 +137,7 @@ static int __init atstk1004_init(void)
 	at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
 #endif
 #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
-	at32_add_device_mci(0);
+	at32_add_device_mci(0, NULL);
 #endif
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
 			     fbmem_start, fbmem_size, 0);
diff --git a/arch/avr32/boards/atstk1000/flash.c b/arch/avr32/boards/atstk1000/flash.c
index 3d0a102ad45e..6e4d561977ff 100644
--- a/arch/avr32/boards/atstk1000/flash.c
+++ b/arch/avr32/boards/atstk1000/flash.c
@@ -13,7 +13,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 static struct smc_timing flash_timing __initdata = {
 	.ncs_read_setup		= 0,
diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c
index 8bedf93876a3..2d6b560115d9 100644
--- a/arch/avr32/boards/atstk1000/setup.c
+++ b/arch/avr32/boards/atstk1000/setup.c
@@ -18,9 +18,9 @@
 
 #include <asm/setup.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/portmux.h>
 
 #include "atstk1000.h"
 
diff --git a/arch/avr32/include/asm/Kbuild b/arch/avr32/include/asm/Kbuild
new file mode 100644
index 000000000000..3136628ba8d2
--- /dev/null
+++ b/arch/avr32/include/asm/Kbuild
@@ -0,0 +1,3 @@
+include include/asm-generic/Kbuild.asm
+
+header-y	+= cachectl.h
diff --git a/arch/avr32/include/asm/a.out.h b/arch/avr32/include/asm/a.out.h
new file mode 100644
index 000000000000..e46375a34a72
--- /dev/null
+++ b/arch/avr32/include/asm/a.out.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_AVR32_A_OUT_H
+#define __ASM_AVR32_A_OUT_H
+
+struct exec
+{
+  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
+  unsigned a_text;		/* length of text, in bytes */
+  unsigned a_data;		/* length of data, in bytes */
+  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+  unsigned a_syms;		/* length of symbol table data in file, in bytes */
+  unsigned a_entry;		/* start address */
+  unsigned a_trsize;		/* length of relocation info for text, in bytes */
+  unsigned a_drsize;		/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#endif /* __ASM_AVR32_A_OUT_H */
diff --git a/arch/avr32/include/asm/addrspace.h b/arch/avr32/include/asm/addrspace.h
new file mode 100644
index 000000000000..366794858ec7
--- /dev/null
+++ b/arch/avr32/include/asm/addrspace.h
@@ -0,0 +1,43 @@
+/*
+ * Defitions for the address spaces of the AVR32 CPUs. Heavily based on
+ * include/asm-sh/addrspace.h
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ADDRSPACE_H
+#define __ASM_AVR32_ADDRSPACE_H
+
+#ifdef CONFIG_MMU
+
+/* Memory segments when segmentation is enabled */
+#define P0SEG		0x00000000
+#define P1SEG		0x80000000
+#define P2SEG		0xa0000000
+#define P3SEG		0xc0000000
+#define P4SEG		0xe0000000
+
+/* Returns the privileged segment base of a given address */
+#define PXSEG(a)	(((unsigned long)(a)) & 0xe0000000)
+
+/* Returns the physical address of a PnSEG (n=1,2) address */
+#define PHYSADDR(a)	(((unsigned long)(a)) & 0x1fffffff)
+
+/*
+ * Map an address to a certain privileged segment
+ */
+#define P1SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \
+				      | P1SEG))
+#define P2SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \
+				      | P2SEG))
+#define P3SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \
+				      | P3SEG))
+#define P4SEGADDR(a) ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) \
+				      | P4SEG))
+
+#endif /* CONFIG_MMU */
+
+#endif /* __ASM_AVR32_ADDRSPACE_H */
diff --git a/arch/avr32/include/asm/asm.h b/arch/avr32/include/asm/asm.h
new file mode 100644
index 000000000000..a2c64f404b98
--- /dev/null
+++ b/arch/avr32/include/asm/asm.h
@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ASM_H__
+#define __ASM_AVR32_ASM_H__
+
+#include <asm/sysreg.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+
+#define mask_interrupts		ssrf	SYSREG_GM_OFFSET
+#define mask_exceptions		ssrf	SYSREG_EM_OFFSET
+#define unmask_interrupts	csrf	SYSREG_GM_OFFSET
+#define unmask_exceptions	csrf	SYSREG_EM_OFFSET
+
+#ifdef CONFIG_FRAME_POINTER
+	.macro	save_fp
+	st.w	--sp, r7
+	.endm
+	.macro	restore_fp
+	ld.w	r7, sp++
+	.endm
+	.macro	zero_fp
+	mov	r7, 0
+	.endm
+#else
+	.macro	save_fp
+	.endm
+	.macro	restore_fp
+	.endm
+	.macro	zero_fp
+	.endm
+#endif
+	.macro	get_thread_info reg
+	mov	\reg, sp
+	andl	\reg, ~(THREAD_SIZE - 1) & 0xffff
+	.endm
+
+	/* Save and restore registers */
+	.macro	save_min sr, tmp=lr
+	pushm	lr
+	mfsr	\tmp, \sr
+	zero_fp
+	st.w	--sp, \tmp
+	.endm
+
+	.macro	restore_min sr, tmp=lr
+	ld.w	\tmp, sp++
+	mtsr	\sr, \tmp
+	popm	lr
+	.endm
+
+	.macro	save_half sr, tmp=lr
+	save_fp
+	pushm	r8-r9,r10,r11,r12,lr
+	zero_fp
+	mfsr	\tmp, \sr
+	st.w	--sp, \tmp
+	.endm
+
+	.macro	restore_half sr, tmp=lr
+	ld.w	\tmp, sp++
+	mtsr	\sr, \tmp
+	popm	r8-r9,r10,r11,r12,lr
+	restore_fp
+	.endm
+
+	.macro	save_full_user sr, tmp=lr
+	stmts	--sp, r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,sp,lr
+	st.w	--sp, lr
+	zero_fp
+	mfsr	\tmp, \sr
+	st.w	--sp, \tmp
+	.endm
+
+	.macro	restore_full_user sr, tmp=lr
+	ld.w	\tmp, sp++
+	mtsr	\sr, \tmp
+	ld.w	lr, sp++
+	ldmts	sp++, r0,r1,r2,r3,r4,r5,r6,r7,r8,r9,r10,r11,r12,sp,lr
+	.endm
+
+	/* uaccess macros */
+	.macro branch_if_kernel scratch, label
+	get_thread_info \scratch
+	ld.w	\scratch, \scratch[TI_flags]
+	bld	\scratch, TIF_USERSPACE
+	brcc	\label
+	.endm
+
+	.macro ret_if_privileged scratch, addr, size, ret
+	sub	\scratch, \size, 1
+	add	\scratch, \addr
+	retcs	\ret
+	retmi	\ret
+	.endm
+
+#endif /* __ASM_AVR32_ASM_H__ */
diff --git a/arch/avr32/include/asm/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h
new file mode 100644
index 000000000000..c2ea6e1c9aa1
--- /dev/null
+++ b/arch/avr32/include/asm/atmel-mci.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_AVR32_ATMEL_MCI_H
+#define __ASM_AVR32_ATMEL_MCI_H
+
+struct mci_platform_data {
+	int			detect_pin;
+	int			wp_pin;
+};
+
+#endif /* __ASM_AVR32_ATMEL_MCI_H */
diff --git a/arch/avr32/include/asm/atomic.h b/arch/avr32/include/asm/atomic.h
new file mode 100644
index 000000000000..7ef3862a73d0
--- /dev/null
+++ b/arch/avr32/include/asm/atomic.h
@@ -0,0 +1,201 @@
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc.
+ *
+ * But use these as seldom as possible since they are slower than
+ * regular operations.
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ATOMIC_H
+#define __ASM_AVR32_ATOMIC_H
+
+#include <asm/system.h>
+
+typedef struct { volatile int counter; } atomic_t;
+#define ATOMIC_INIT(i)  { (i) }
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v, i)	(((v)->counter) = i)
+
+/*
+ * atomic_sub_return - subtract the atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically subtracts @i from @v. Returns the resulting value.
+ */
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	int result;
+
+	asm volatile(
+		"/* atomic_sub_return */\n"
+		"1:	ssrf	5\n"
+		"	ld.w	%0, %2\n"
+		"	sub	%0, %3\n"
+		"	stcond	%1, %0\n"
+		"	brne	1b"
+		: "=&r"(result), "=o"(v->counter)
+		: "m"(v->counter), "rKs21"(i)
+		: "cc");
+
+	return result;
+}
+
+/*
+ * atomic_add_return - add integer to atomic variable
+ * @i: integer value to add
+ * @v: pointer of type atomic_t
+ *
+ * Atomically adds @i to @v. Returns the resulting value.
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	int result;
+
+	if (__builtin_constant_p(i) && (i >= -1048575) && (i <= 1048576))
+		result = atomic_sub_return(-i, v);
+	else
+		asm volatile(
+			"/* atomic_add_return */\n"
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %1\n"
+			"	add	%0, %3\n"
+			"	stcond	%2, %0\n"
+			"	brne	1b"
+			: "=&r"(result), "=o"(v->counter)
+			: "m"(v->counter), "r"(i)
+			: "cc", "memory");
+
+	return result;
+}
+
+/*
+ * atomic_sub_unless - sub unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * If the atomic value v is not equal to u, this function subtracts a
+ * from v, and returns non zero. If v is equal to u then it returns
+ * zero. This is done as an atomic operation.
+*/
+static inline int atomic_sub_unless(atomic_t *v, int a, int u)
+{
+	int tmp, result = 0;
+
+	asm volatile(
+		"/* atomic_sub_unless */\n"
+		"1:	ssrf	5\n"
+		"	ld.w	%0, %3\n"
+		"	cp.w	%0, %5\n"
+		"	breq	1f\n"
+		"	sub	%0, %4\n"
+		"	stcond	%2, %0\n"
+		"	brne	1b\n"
+		"	mov	%1, 1\n"
+		"1:"
+		: "=&r"(tmp), "=&r"(result), "=o"(v->counter)
+		: "m"(v->counter), "rKs21"(a), "rKs21"(u), "1"(result)
+		: "cc", "memory");
+
+	return result;
+}
+
+/*
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * If the atomic value v is not equal to u, this function adds a to v,
+ * and returns non zero. If v is equal to u then it returns zero. This
+ * is done as an atomic operation.
+*/
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int tmp, result;
+
+	if (__builtin_constant_p(a) && (a >= -1048575) && (a <= 1048576))
+		result = atomic_sub_unless(v, -a, u);
+	else {
+		result = 0;
+		asm volatile(
+			"/* atomic_add_unless */\n"
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %3\n"
+			"	cp.w	%0, %5\n"
+			"	breq	1f\n"
+			"	add	%0, %4\n"
+			"	stcond	%2, %0\n"
+			"	brne	1b\n"
+			"	mov	%1, 1\n"
+			"1:"
+			: "=&r"(tmp), "=&r"(result), "=o"(v->counter)
+			: "m"(v->counter), "r"(a), "ir"(u), "1"(result)
+			: "cc", "memory");
+	}
+
+	return result;
+}
+
+/*
+ * atomic_sub_if_positive - conditionally subtract integer from atomic variable
+ * @i: integer value to subtract
+ * @v: pointer of type atomic_t
+ *
+ * Atomically test @v and subtract @i if @v is greater or equal than @i.
+ * The function returns the old value of @v minus @i.
+ */
+static inline int atomic_sub_if_positive(int i, atomic_t *v)
+{
+	int result;
+
+	asm volatile(
+		"/* atomic_sub_if_positive */\n"
+		"1:	ssrf	5\n"
+		"	ld.w	%0, %2\n"
+		"	sub	%0, %3\n"
+		"	brlt	1f\n"
+		"	stcond	%1, %0\n"
+		"	brne	1b\n"
+		"1:"
+		: "=&r"(result), "=o"(v->counter)
+		: "m"(v->counter), "ir"(i)
+		: "cc", "memory");
+
+	return result;
+}
+
+#define atomic_xchg(v, new)	(xchg(&((v)->counter), new))
+#define atomic_cmpxchg(v, o, n)	(cmpxchg(&((v)->counter), (o), (n)))
+
+#define atomic_sub(i, v)	(void)atomic_sub_return(i, v)
+#define atomic_add(i, v)	(void)atomic_add_return(i, v)
+#define atomic_dec(v)		atomic_sub(1, (v))
+#define atomic_inc(v)		atomic_add(1, (v))
+
+#define atomic_dec_return(v)	atomic_sub_return(1, v)
+#define atomic_inc_return(v)	atomic_add_return(1, v)
+
+#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
+#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0)
+#define atomic_add_negative(i, v) (atomic_add_return(i, v) < 0)
+
+#define atomic_inc_not_zero(v)	atomic_add_unless(v, 1, 0)
+#define atomic_dec_if_positive(v) atomic_sub_if_positive(1, v)
+
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#include <asm-generic/atomic.h>
+
+#endif /*  __ASM_AVR32_ATOMIC_H */
diff --git a/arch/avr32/include/asm/auxvec.h b/arch/avr32/include/asm/auxvec.h
new file mode 100644
index 000000000000..d5dd435bf8f4
--- /dev/null
+++ b/arch/avr32/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASM_AVR32_AUXVEC_H
+#define __ASM_AVR32_AUXVEC_H
+
+#endif /* __ASM_AVR32_AUXVEC_H */
diff --git a/arch/avr32/include/asm/bitops.h b/arch/avr32/include/asm/bitops.h
new file mode 100644
index 000000000000..1a50b69b1a19
--- /dev/null
+++ b/arch/avr32/include/asm/bitops.h
@@ -0,0 +1,301 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_BITOPS_H
+#define __ASM_AVR32_BITOPS_H
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm/byteorder.h>
+#include <asm/system.h>
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+/*
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ *
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void set_bit(int nr, volatile void * addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
+	unsigned long tmp;
+
+	if (__builtin_constant_p(nr)) {
+		asm volatile(
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %2\n"
+			"	sbr	%0, %3\n"
+			"	stcond	%1, %0\n"
+			"	brne	1b"
+			: "=&r"(tmp), "=o"(*p)
+			: "m"(*p), "i"(nr)
+			: "cc");
+	} else {
+		unsigned long mask = 1UL << (nr % BITS_PER_LONG);
+		asm volatile(
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %2\n"
+			"	or	%0, %3\n"
+			"	stcond	%1, %0\n"
+			"	brne	1b"
+			: "=&r"(tmp), "=o"(*p)
+			: "m"(*p), "r"(mask)
+			: "cc");
+	}
+}
+
+/*
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static inline void clear_bit(int nr, volatile void * addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
+	unsigned long tmp;
+
+	if (__builtin_constant_p(nr)) {
+		asm volatile(
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %2\n"
+			"	cbr	%0, %3\n"
+			"	stcond	%1, %0\n"
+			"	brne	1b"
+			: "=&r"(tmp), "=o"(*p)
+			: "m"(*p), "i"(nr)
+			: "cc");
+	} else {
+		unsigned long mask = 1UL << (nr % BITS_PER_LONG);
+		asm volatile(
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %2\n"
+			"	andn	%0, %3\n"
+			"	stcond	%1, %0\n"
+			"	brne	1b"
+			: "=&r"(tmp), "=o"(*p)
+			: "m"(*p), "r"(mask)
+			: "cc");
+	}
+}
+
+/*
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static inline void change_bit(int nr, volatile void * addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
+	unsigned long mask = 1UL << (nr % BITS_PER_LONG);
+	unsigned long tmp;
+
+	asm volatile(
+		"1:	ssrf	5\n"
+		"	ld.w	%0, %2\n"
+		"	eor	%0, %3\n"
+		"	stcond	%1, %0\n"
+		"	brne	1b"
+		: "=&r"(tmp), "=o"(*p)
+		: "m"(*p), "r"(mask)
+		: "cc");
+}
+
+/*
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_set_bit(int nr, volatile void * addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
+	unsigned long mask = 1UL << (nr % BITS_PER_LONG);
+	unsigned long tmp, old;
+
+	if (__builtin_constant_p(nr)) {
+		asm volatile(
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %3\n"
+			"	mov	%2, %0\n"
+			"	sbr	%0, %4\n"
+			"	stcond	%1, %0\n"
+			"	brne	1b"
+			: "=&r"(tmp), "=o"(*p), "=&r"(old)
+			: "m"(*p), "i"(nr)
+			: "memory", "cc");
+	} else {
+		asm volatile(
+			"1:	ssrf	5\n"
+			"	ld.w	%2, %3\n"
+			"	or	%0, %2, %4\n"
+			"	stcond	%1, %0\n"
+			"	brne	1b"
+			: "=&r"(tmp), "=o"(*p), "=&r"(old)
+			: "m"(*p), "r"(mask)
+			: "memory", "cc");
+	}
+
+	return (old & mask) != 0;
+}
+
+/*
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_clear_bit(int nr, volatile void * addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
+	unsigned long mask = 1UL << (nr % BITS_PER_LONG);
+	unsigned long tmp, old;
+
+	if (__builtin_constant_p(nr)) {
+		asm volatile(
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %3\n"
+			"	mov	%2, %0\n"
+			"	cbr	%0, %4\n"
+			"	stcond	%1, %0\n"
+			"	brne	1b"
+			: "=&r"(tmp), "=o"(*p), "=&r"(old)
+			: "m"(*p), "i"(nr)
+			: "memory", "cc");
+	} else {
+		asm volatile(
+			"1:	ssrf	5\n"
+			"	ld.w	%0, %3\n"
+			"	mov	%2, %0\n"
+			"	andn	%0, %4\n"
+			"	stcond	%1, %0\n"
+			"	brne	1b"
+			: "=&r"(tmp), "=o"(*p), "=&r"(old)
+			: "m"(*p), "r"(mask)
+			: "memory", "cc");
+	}
+
+	return (old & mask) != 0;
+}
+
+/*
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.
+ * It also implies a memory barrier.
+ */
+static inline int test_and_change_bit(int nr, volatile void * addr)
+{
+	unsigned long *p = ((unsigned long *)addr) + nr / BITS_PER_LONG;
+	unsigned long mask = 1UL << (nr % BITS_PER_LONG);
+	unsigned long tmp, old;
+
+	asm volatile(
+		"1:	ssrf	5\n"
+		"	ld.w	%2, %3\n"
+		"	eor	%0, %2, %4\n"
+		"	stcond	%1, %0\n"
+		"	brne	1b"
+		: "=&r"(tmp), "=o"(*p), "=&r"(old)
+		: "m"(*p), "r"(mask)
+		: "memory", "cc");
+
+	return (old & mask) != 0;
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+/* Find First bit Set */
+static inline unsigned long __ffs(unsigned long word)
+{
+	unsigned long result;
+
+	asm("brev %1\n\t"
+	    "clz %0,%1"
+	    : "=r"(result), "=&r"(word)
+	    : "1"(word));
+	return result;
+}
+
+/* Find First Zero */
+static inline unsigned long ffz(unsigned long word)
+{
+	return __ffs(~word);
+}
+
+/* Find Last bit Set */
+static inline int fls(unsigned long word)
+{
+	unsigned long result;
+
+	asm("clz %0,%1" : "=r"(result) : "r"(word));
+	return 32 - result;
+}
+
+unsigned long find_first_zero_bit(const unsigned long *addr,
+				  unsigned long size);
+unsigned long find_next_zero_bit(const unsigned long *addr,
+				 unsigned long size,
+				 unsigned long offset);
+unsigned long find_first_bit(const unsigned long *addr,
+			     unsigned long size);
+unsigned long find_next_bit(const unsigned long *addr,
+				 unsigned long size,
+				 unsigned long offset);
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ *
+ * The difference is that bit numbering starts at 1, and if no bit is set,
+ * the function returns 0.
+ */
+static inline int ffs(unsigned long word)
+{
+	if(word == 0)
+		return 0;
+	return __ffs(word) + 1;
+}
+
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix-le.h>
+
+#endif /* __ASM_AVR32_BITOPS_H */
diff --git a/arch/avr32/include/asm/bug.h b/arch/avr32/include/asm/bug.h
new file mode 100644
index 000000000000..331d45bab18f
--- /dev/null
+++ b/arch/avr32/include/asm/bug.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_BUG_H
+#define __ASM_AVR32_BUG_H
+
+#ifdef CONFIG_BUG
+
+/*
+ * According to our Chief Architect, this compact opcode is very
+ * unlikely to ever be implemented.
+ */
+#define AVR32_BUG_OPCODE	0x5df0
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+
+#define _BUG_OR_WARN(flags)						\
+	asm volatile(							\
+		"1:	.hword	%0\n"					\
+		"	.section __bug_table,\"a\",@progbits\n"		\
+		"2:	.long	1b\n"					\
+		"	.long	%1\n"					\
+		"	.short	%2\n"					\
+		"	.short	%3\n"					\
+		"	.org	2b + %4\n"				\
+		"	.previous"					\
+		:							\
+		: "i"(AVR32_BUG_OPCODE), "i"(__FILE__),			\
+		  "i"(__LINE__), "i"(flags),				\
+		  "i"(sizeof(struct bug_entry)))
+
+#else
+
+#define _BUG_OR_WARN(flags)						\
+	asm volatile(							\
+		"1:	.hword	%0\n"					\
+		"	.section __bug_table,\"a\",@progbits\n"		\
+		"2:	.long	1b\n"					\
+		"	.short	%1\n"					\
+		"	.org	2b + %2\n"				\
+		"	.previous"					\
+		:							\
+		: "i"(AVR32_BUG_OPCODE), "i"(flags),			\
+		  "i"(sizeof(struct bug_entry)))
+
+#endif /* CONFIG_DEBUG_BUGVERBOSE */
+
+#define BUG()								\
+	do {								\
+		_BUG_OR_WARN(0);					\
+		for (;;);						\
+	} while (0)
+
+#define WARN_ON(condition)							\
+	({								\
+		int __ret_warn_on = !!(condition);			\
+		if (unlikely(__ret_warn_on))				\
+			_BUG_OR_WARN(BUGFLAG_WARNING);			\
+		unlikely(__ret_warn_on);				\
+	})
+
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_WARN_ON
+
+#endif /* CONFIG_BUG */
+
+#include <asm-generic/bug.h>
+
+#endif /* __ASM_AVR32_BUG_H */
diff --git a/arch/avr32/include/asm/bugs.h b/arch/avr32/include/asm/bugs.h
new file mode 100644
index 000000000000..7635e770622e
--- /dev/null
+++ b/arch/avr32/include/asm/bugs.h
@@ -0,0 +1,15 @@
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *      void check_bugs(void);
+ */
+#ifndef __ASM_AVR32_BUGS_H
+#define __ASM_AVR32_BUGS_H
+
+static void __init check_bugs(void)
+{
+	cpu_data->loops_per_jiffy = loops_per_jiffy;
+}
+
+#endif /* __ASM_AVR32_BUGS_H */
diff --git a/arch/avr32/include/asm/byteorder.h b/arch/avr32/include/asm/byteorder.h
new file mode 100644
index 000000000000..d77b48ba7338
--- /dev/null
+++ b/arch/avr32/include/asm/byteorder.h
@@ -0,0 +1,31 @@
+/*
+ * AVR32 endian-conversion functions.
+ */
+#ifndef __ASM_AVR32_BYTEORDER_H
+#define __ASM_AVR32_BYTEORDER_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __CHECKER__
+extern unsigned long __builtin_bswap_32(unsigned long x);
+extern unsigned short __builtin_bswap_16(unsigned short x);
+#endif
+
+/*
+ * avr32-linux-gcc versions earlier than 4.2 improperly sign-extends
+ * the result.
+ */
+#if !(__GNUC__ == 4 && __GNUC_MINOR__ < 2)
+#define __arch__swab32(x) __builtin_bswap_32(x)
+#define __arch__swab16(x) __builtin_bswap_16(x)
+#endif
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+# define __BYTEORDER_HAS_U64__
+# define __SWAB_64_THRU_32__
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* __ASM_AVR32_BYTEORDER_H */
diff --git a/arch/avr32/include/asm/cache.h b/arch/avr32/include/asm/cache.h
new file mode 100644
index 000000000000..d3cf35ab11ab
--- /dev/null
+++ b/arch/avr32/include/asm/cache.h
@@ -0,0 +1,38 @@
+#ifndef __ASM_AVR32_CACHE_H
+#define __ASM_AVR32_CACHE_H
+
+#define L1_CACHE_SHIFT 5
+#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+
+/*
+ * Memory returned by kmalloc() may be used for DMA, so we must make
+ * sure that all such allocations are cache aligned. Otherwise,
+ * unrelated code may cause parts of the buffer to be read into the
+ * cache before the transfer is done, causing old data to be seen by
+ * the CPU.
+ */
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
+#ifndef __ASSEMBLER__
+struct cache_info {
+	unsigned int ways;
+	unsigned int sets;
+	unsigned int linesz;
+};
+#endif /* __ASSEMBLER */
+
+/* Cache operation constants */
+#define ICACHE_FLUSH		0x00
+#define ICACHE_INVALIDATE	0x01
+#define ICACHE_LOCK		0x02
+#define ICACHE_UNLOCK		0x03
+#define ICACHE_PREFETCH		0x04
+
+#define DCACHE_FLUSH		0x08
+#define DCACHE_LOCK		0x09
+#define DCACHE_UNLOCK		0x0a
+#define DCACHE_INVALIDATE	0x0b
+#define DCACHE_CLEAN		0x0c
+#define DCACHE_CLEAN_INVAL	0x0d
+
+#endif /* __ASM_AVR32_CACHE_H */
diff --git a/arch/avr32/include/asm/cachectl.h b/arch/avr32/include/asm/cachectl.h
new file mode 100644
index 000000000000..4faf1ce60061
--- /dev/null
+++ b/arch/avr32/include/asm/cachectl.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_AVR32_CACHECTL_H
+#define __ASM_AVR32_CACHECTL_H
+
+/*
+ * Operations that can be performed through the cacheflush system call
+ */
+
+/* Clean the data cache, then invalidate the icache */
+#define CACHE_IFLUSH	0
+
+#endif /* __ASM_AVR32_CACHECTL_H */
diff --git a/arch/avr32/include/asm/cacheflush.h b/arch/avr32/include/asm/cacheflush.h
new file mode 100644
index 000000000000..670674749b20
--- /dev/null
+++ b/arch/avr32/include/asm/cacheflush.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_CACHEFLUSH_H
+#define __ASM_AVR32_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+#define CACHE_OP_ICACHE_INVALIDATE	0x01
+#define CACHE_OP_DCACHE_INVALIDATE	0x0b
+#define CACHE_OP_DCACHE_CLEAN		0x0c
+#define CACHE_OP_DCACHE_CLEAN_INVAL	0x0d
+
+/*
+ * Invalidate any cacheline containing virtual address vaddr without
+ * writing anything back to memory.
+ *
+ * Note that this function may corrupt unrelated data structures when
+ * applied on buffers that are not cacheline aligned in both ends.
+ */
+static inline void invalidate_dcache_line(void *vaddr)
+{
+	asm volatile("cache %0[0], %1"
+		     :
+		     : "r"(vaddr), "n"(CACHE_OP_DCACHE_INVALIDATE)
+		     : "memory");
+}
+
+/*
+ * Make sure any cacheline containing virtual address vaddr is written
+ * to memory.
+ */
+static inline void clean_dcache_line(void *vaddr)
+{
+	asm volatile("cache %0[0], %1"
+		     :
+		     : "r"(vaddr), "n"(CACHE_OP_DCACHE_CLEAN)
+		     : "memory");
+}
+
+/*
+ * Make sure any cacheline containing virtual address vaddr is written
+ * to memory and then invalidate it.
+ */
+static inline void flush_dcache_line(void *vaddr)
+{
+	asm volatile("cache %0[0], %1"
+		     :
+		     : "r"(vaddr), "n"(CACHE_OP_DCACHE_CLEAN_INVAL)
+		     : "memory");
+}
+
+/*
+ * Invalidate any instruction cacheline containing virtual address
+ * vaddr.
+ */
+static inline void invalidate_icache_line(void *vaddr)
+{
+	asm volatile("cache %0[0], %1"
+		     :
+		     : "r"(vaddr), "n"(CACHE_OP_ICACHE_INVALIDATE)
+		     : "memory");
+}
+
+/*
+ * Applies the above functions on all lines that are touched by the
+ * specified virtual address range.
+ */
+void invalidate_dcache_region(void *start, size_t len);
+void clean_dcache_region(void *start, size_t len);
+void flush_dcache_region(void *start, size_t len);
+void invalidate_icache_region(void *start, size_t len);
+
+/*
+ * Make sure any pending writes are completed before continuing.
+ */
+#define flush_write_buffer() asm volatile("sync 0" : : : "memory")
+
+/*
+ * The following functions are called when a virtual mapping changes.
+ * We do not need to flush anything in this case.
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+/*
+ * I think we need to implement this one to be able to reliably
+ * execute pages from RAMDISK. However, if we implement the
+ * flush_dcache_*() functions, it might not be needed anymore.
+ *
+ * #define flush_icache_page(vma, page)		do { } while (0)
+ */
+extern void flush_icache_page(struct vm_area_struct *vma, struct page *page);
+
+/*
+ * These are (I think) related to D-cache aliasing.  We might need to
+ * do something here, but only for certain configurations.  No such
+ * configurations exist at this time.
+ */
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(page)		do { } while (0)
+#define flush_dcache_mmap_unlock(page)		do { } while (0)
+
+/*
+ * These are for I/D cache coherency. In this case, we do need to
+ * flush with all configurations.
+ */
+extern void flush_icache_range(unsigned long start, unsigned long end);
+
+extern void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+		unsigned long vaddr, void *dst, const void *src,
+		unsigned long len);
+
+static inline void copy_from_user_page(struct vm_area_struct *vma,
+		struct page *page, unsigned long vaddr, void *dst,
+		const void *src, unsigned long len)
+{
+	memcpy(dst, src, len);
+}
+
+#endif /* __ASM_AVR32_CACHEFLUSH_H */
diff --git a/arch/avr32/include/asm/checksum.h b/arch/avr32/include/asm/checksum.h
new file mode 100644
index 000000000000..4ddbfd2486af
--- /dev/null
+++ b/arch/avr32/include/asm/checksum.h
@@ -0,0 +1,152 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_CHECKSUM_H
+#define __ASM_AVR32_CHECKSUM_H
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums, and handles user-space pointer exceptions correctly, when needed.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+__wsum csum_partial_copy_generic(const void *src, void *dst, int len,
+				       __wsum sum, int *src_err_ptr,
+				       int *dst_err_ptr);
+
+/*
+ *	Note: when you get a NULL pointer exception here this means someone
+ *	passed in an incorrect kernel address to one of these functions.
+ *
+ *	If you use these functions directly please don't forget the
+ *	access_ok().
+ */
+static inline
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+				       int len, __wsum sum)
+{
+	return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL);
+}
+
+static inline
+__wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+					  int len, __wsum sum, int *err_ptr)
+{
+	return csum_partial_copy_generic((const void __force *)src, dst, len,
+					 sum, err_ptr, NULL);
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int sum, tmp;
+
+	__asm__ __volatile__(
+		"	ld.w	%0, %1++\n"
+		"	ld.w	%3, %1++\n"
+		"	sub	%2, 4\n"
+		"	add	%0, %3\n"
+		"	ld.w	%3, %1++\n"
+		"	adc	%0, %0, %3\n"
+		"	ld.w	%3, %1++\n"
+		"	adc	%0, %0, %3\n"
+		"	acr	%0\n"
+		"1:	ld.w	%3, %1++\n"
+		"	add	%0, %3\n"
+		"	acr	%0\n"
+		"	sub	%2, 1\n"
+		"	brne	1b\n"
+		"	lsl	%3, %0, 16\n"
+		"	andl	%0, 0\n"
+		"	mov	%2, 0xffff\n"
+		"	add	%0, %3\n"
+		"	adc	%0, %0, %2\n"
+		"	com	%0\n"
+		"	lsr	%0, 16\n"
+		: "=r"(sum), "=r"(iph), "=r"(ihl), "=r"(tmp)
+		: "1"(iph), "2"(ihl)
+		: "memory", "cc");
+	return (__force __sum16)sum;
+}
+
+/*
+ *	Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp;
+
+	asm("	bfextu	%1, %0, 0, 16\n"
+	    "	lsr	%0, 16\n"
+	    "	add	%0, %1\n"
+	    "	bfextu	%1, %0, 16, 16\n"
+	    "	add	%0, %1"
+	    : "=&r"(sum), "=&r"(tmp)
+	    : "0"(sum));
+
+	return (__force __sum16)~sum;
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+					       unsigned short len,
+					       unsigned short proto,
+					       __wsum sum)
+{
+	asm("	add	%0, %1\n"
+	    "	adc	%0, %0, %2\n"
+	    "	adc	%0, %0, %3\n"
+	    "	acr	%0"
+	    : "=r"(sum)
+	    : "r"(daddr), "r"(saddr), "r"(len + proto),
+	      "0"(sum)
+	    : "cc");
+
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+    return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* __ASM_AVR32_CHECKSUM_H */
diff --git a/arch/avr32/include/asm/cputime.h b/arch/avr32/include/asm/cputime.h
new file mode 100644
index 000000000000..e87e0f81cbeb
--- /dev/null
+++ b/arch/avr32/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_CPUTIME_H
+#define __ASM_AVR32_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __ASM_AVR32_CPUTIME_H */
diff --git a/arch/avr32/include/asm/current.h b/arch/avr32/include/asm/current.h
new file mode 100644
index 000000000000..c7b0549eab8a
--- /dev/null
+++ b/arch/avr32/include/asm/current.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_AVR32_CURRENT_H
+#define __ASM_AVR32_CURRENT_H
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+inline static struct task_struct * get_current(void)
+{
+	return current_thread_info()->task;
+}
+
+#define current get_current()
+
+#endif /* __ASM_AVR32_CURRENT_H */
diff --git a/arch/avr32/include/asm/delay.h b/arch/avr32/include/asm/delay.h
new file mode 100644
index 000000000000..a0ed9a9839a5
--- /dev/null
+++ b/arch/avr32/include/asm/delay.h
@@ -0,0 +1,26 @@
+#ifndef __ASM_AVR32_DELAY_H
+#define __ASM_AVR32_DELAY_H
+
+/*
+ * Copyright (C) 1993 Linus Torvalds
+ *
+ * Delay routines calling functions in arch/avr32/lib/delay.c
+ */
+
+extern void __bad_udelay(void);
+extern void __bad_ndelay(void);
+
+extern void __udelay(unsigned long usecs);
+extern void __ndelay(unsigned long nsecs);
+extern void __const_udelay(unsigned long xloops);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \
+	__udelay(n))
+
+#define ndelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
+	__ndelay(n))
+
+#endif /* __ASM_AVR32_DELAY_H */
diff --git a/arch/avr32/include/asm/device.h b/arch/avr32/include/asm/device.h
new file mode 100644
index 000000000000..d8f9872b0e2d
--- /dev/null
+++ b/arch/avr32/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/avr32/include/asm/div64.h b/arch/avr32/include/asm/div64.h
new file mode 100644
index 000000000000..d7ddd4fdeca6
--- /dev/null
+++ b/arch/avr32/include/asm/div64.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_DIV64_H
+#define __ASM_AVR32_DIV64_H
+
+#include <asm-generic/div64.h>
+
+#endif /* __ASM_AVR32_DIV64_H */
diff --git a/arch/avr32/include/asm/dma-mapping.h b/arch/avr32/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..0399359ab5d8
--- /dev/null
+++ b/arch/avr32/include/asm/dma-mapping.h
@@ -0,0 +1,349 @@
+#ifndef __ASM_AVR32_DMA_MAPPING_H
+#define __ASM_AVR32_DMA_MAPPING_H
+
+#include <linux/mm.h>
+#include <linux/device.h>
+#include <linux/scatterlist.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+extern void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+	int direction);
+
+/*
+ * Return whether the given device DMA address mask can be supported
+ * properly.  For example, if your device can only drive the low 24-bits
+ * during bus mastering, then you would pass 0x00ffffff as the mask
+ * to this function.
+ */
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	/* Fix when needed. I really don't know of any limitations */
+	return 1;
+}
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+
+	*dev->dma_mask = dma_mask;
+	return 0;
+}
+
+/*
+ * dma_map_single can't fail as it is implemented now.
+ */
+static inline int dma_mapping_error(struct device *dev, dma_addr_t addr)
+{
+	return 0;
+}
+
+/**
+ * dma_alloc_coherent - allocate consistent memory for DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: required memory size
+ * @handle: bus-specific DMA address
+ *
+ * Allocate some uncached, unbuffered memory for a device for
+ * performing DMA.  This function allocates pages, and will
+ * return the CPU-viewed address, and sets @handle to be the
+ * device-viewed address.
+ */
+extern void *dma_alloc_coherent(struct device *dev, size_t size,
+				dma_addr_t *handle, gfp_t gfp);
+
+/**
+ * dma_free_coherent - free memory allocated by dma_alloc_coherent
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: size of memory originally requested in dma_alloc_coherent
+ * @cpu_addr: CPU-view address returned from dma_alloc_coherent
+ * @handle: device-view address returned from dma_alloc_coherent
+ *
+ * Free (and unmap) a DMA buffer previously allocated by
+ * dma_alloc_coherent().
+ *
+ * References to memory and mappings associated with cpu_addr/handle
+ * during and after this call executing are illegal.
+ */
+extern void dma_free_coherent(struct device *dev, size_t size,
+			      void *cpu_addr, dma_addr_t handle);
+
+/**
+ * dma_alloc_writecombine - allocate write-combining memory for DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: required memory size
+ * @handle: bus-specific DMA address
+ *
+ * Allocate some uncached, buffered memory for a device for
+ * performing DMA.  This function allocates pages, and will
+ * return the CPU-viewed address, and sets @handle to be the
+ * device-viewed address.
+ */
+extern void *dma_alloc_writecombine(struct device *dev, size_t size,
+				    dma_addr_t *handle, gfp_t gfp);
+
+/**
+ * dma_free_coherent - free memory allocated by dma_alloc_writecombine
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @size: size of memory originally requested in dma_alloc_writecombine
+ * @cpu_addr: CPU-view address returned from dma_alloc_writecombine
+ * @handle: device-view address returned from dma_alloc_writecombine
+ *
+ * Free (and unmap) a DMA buffer previously allocated by
+ * dma_alloc_writecombine().
+ *
+ * References to memory and mappings associated with cpu_addr/handle
+ * during and after this call executing are illegal.
+ */
+extern void dma_free_writecombine(struct device *dev, size_t size,
+				  void *cpu_addr, dma_addr_t handle);
+
+/**
+ * dma_map_single - map a single buffer for streaming DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @cpu_addr: CPU direct mapped address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Ensure that any data held in the cache is appropriately discarded
+ * or written back.
+ *
+ * The device owns this memory once this call has completed.  The CPU
+ * can regain ownership by calling dma_unmap_single() or dma_sync_single().
+ */
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+	       enum dma_data_direction direction)
+{
+	dma_cache_sync(dev, cpu_addr, size, direction);
+	return virt_to_bus(cpu_addr);
+}
+
+/**
+ * dma_unmap_single - unmap a single buffer previously mapped
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a single streaming mode DMA translation.  The handle and size
+ * must match what was provided in the previous dma_map_single() call.
+ * All other usages are undefined.
+ *
+ * After this call, reads by the CPU to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+static inline void
+dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		 enum dma_data_direction direction)
+{
+
+}
+
+/**
+ * dma_map_page - map a portion of a page for streaming DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @page: page that buffer resides in
+ * @offset: offset into page for start of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Ensure that any data held in the cache is appropriately discarded
+ * or written back.
+ *
+ * The device owns this memory once this call has completed.  The CPU
+ * can regain ownership by calling dma_unmap_page() or dma_sync_single().
+ */
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction direction)
+{
+	return dma_map_single(dev, page_address(page) + offset,
+			      size, direction);
+}
+
+/**
+ * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a single streaming mode DMA translation.  The handle and size
+ * must match what was provided in the previous dma_map_single() call.
+ * All other usages are undefined.
+ *
+ * After this call, reads by the CPU to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+static inline void
+dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+	       enum dma_data_direction direction)
+{
+	dma_unmap_single(dev, dma_address, size, direction);
+}
+
+/**
+ * dma_map_sg - map a set of SG buffers for streaming mode DMA
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Map a set of buffers described by scatterlist in streaming
+ * mode for DMA.  This is the scatter-gather version of the
+ * above pci_map_single interface.  Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ *       DMA address/length pairs than there are SG table elements.
+ *       (for example via virtual mapping capabilities)
+ *       The routine returns the number of addr/length pairs actually
+ *       used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are
+ * the same here.
+ */
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+	   enum dma_data_direction direction)
+{
+	int i;
+
+	for (i = 0; i < nents; i++) {
+		char *virt;
+
+		sg[i].dma_address = page_to_bus(sg_page(&sg[i])) + sg[i].offset;
+		virt = sg_virt(&sg[i]);
+		dma_cache_sync(dev, virt, sg[i].length, direction);
+	}
+
+	return nents;
+}
+
+/**
+ * dma_unmap_sg - unmap a set of SG buffers mapped by dma_map_sg
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Unmap a set of streaming mode DMA translations.
+ * Again, CPU read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+static inline void
+dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+	     enum dma_data_direction direction)
+{
+
+}
+
+/**
+ * dma_sync_single_for_cpu
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @handle: DMA address of buffer
+ * @size: size of buffer to map
+ * @dir: DMA transfer direction
+ *
+ * Make physical memory consistent for a single streaming mode DMA
+ * translation after a transfer.
+ *
+ * If you perform a dma_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the DMA mapping,
+ * you must call this function before doing so.  At the next point you
+ * give the DMA address back to the card, you must first perform a
+ * dma_sync_single_for_device, and then the device again owns the
+ * buffer.
+ */
+static inline void
+dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			size_t size, enum dma_data_direction direction)
+{
+	/*
+	 * No need to do anything since the CPU isn't supposed to
+	 * touch this memory after we flushed it at mapping- or
+	 * sync-for-device time.
+	 */
+}
+
+static inline void
+dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+			   size_t size, enum dma_data_direction direction)
+{
+	dma_cache_sync(dev, bus_to_virt(dma_handle), size, direction);
+}
+
+static inline void
+dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+			      unsigned long offset, size_t size,
+			      enum dma_data_direction direction)
+{
+	/* just sync everything, that's all the pci API can do */
+	dma_sync_single_for_cpu(dev, dma_handle, offset+size, direction);
+}
+
+static inline void
+dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+				 unsigned long offset, size_t size,
+				 enum dma_data_direction direction)
+{
+	/* just sync everything, that's all the pci API can do */
+	dma_sync_single_for_device(dev, dma_handle, offset+size, direction);
+}
+
+/**
+ * dma_sync_sg_for_cpu
+ * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices
+ * @sg: list of buffers
+ * @nents: number of buffers to map
+ * @dir: DMA transfer direction
+ *
+ * Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as dma_sync_single_for_* but for a scatter-gather list,
+ * same rules and usage.
+ */
+static inline void
+dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+		    int nents, enum dma_data_direction direction)
+{
+	/*
+	 * No need to do anything since the CPU isn't supposed to
+	 * touch this memory after we flushed it at mapping- or
+	 * sync-for-device time.
+	 */
+}
+
+static inline void
+dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+		       int nents, enum dma_data_direction direction)
+{
+	int i;
+
+	for (i = 0; i < nents; i++) {
+		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, direction);
+	}
+}
+
+/* Now for the API extensions over the pci_ one */
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+static inline int dma_is_consistent(struct device *dev, dma_addr_t dma_addr)
+{
+	return 1;
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+	return boot_cpu_data.dcache.linesz;
+}
+
+#endif /* __ASM_AVR32_DMA_MAPPING_H */
diff --git a/arch/avr32/include/asm/dma.h b/arch/avr32/include/asm/dma.h
new file mode 100644
index 000000000000..9e91205590ac
--- /dev/null
+++ b/arch/avr32/include/asm/dma.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_AVR32_DMA_H
+#define __ASM_AVR32_DMA_H
+
+/* The maximum address that we can perform a DMA transfer to on this platform.
+ * Not really applicable to AVR32, but some functions need it. */
+#define MAX_DMA_ADDRESS		0xffffffff
+
+#endif /* __ASM_AVR32_DMA_H */
diff --git a/arch/avr32/include/asm/elf.h b/arch/avr32/include/asm/elf.h
new file mode 100644
index 000000000000..64ce40ee1d58
--- /dev/null
+++ b/arch/avr32/include/asm/elf.h
@@ -0,0 +1,108 @@
+#ifndef __ASM_AVR32_ELF_H
+#define __ASM_AVR32_ELF_H
+
+/* AVR32 relocation numbers */
+#define R_AVR32_NONE		0
+#define R_AVR32_32		1
+#define R_AVR32_16		2
+#define R_AVR32_8		3
+#define R_AVR32_32_PCREL	4
+#define R_AVR32_16_PCREL	5
+#define R_AVR32_8_PCREL		6
+#define R_AVR32_DIFF32		7
+#define R_AVR32_DIFF16		8
+#define R_AVR32_DIFF8		9
+#define R_AVR32_GOT32		10
+#define R_AVR32_GOT16		11
+#define R_AVR32_GOT8		12
+#define R_AVR32_21S		13
+#define R_AVR32_16U		14
+#define R_AVR32_16S		15
+#define R_AVR32_8S		16
+#define R_AVR32_8S_EXT		17
+#define R_AVR32_22H_PCREL	18
+#define R_AVR32_18W_PCREL	19
+#define R_AVR32_16B_PCREL	20
+#define R_AVR32_16N_PCREL	21
+#define R_AVR32_14UW_PCREL	22
+#define R_AVR32_11H_PCREL	23
+#define R_AVR32_10UW_PCREL	24
+#define R_AVR32_9H_PCREL	25
+#define R_AVR32_9UW_PCREL	26
+#define R_AVR32_HI16		27
+#define R_AVR32_LO16		28
+#define R_AVR32_GOTPC		29
+#define R_AVR32_GOTCALL		30
+#define R_AVR32_LDA_GOT		31
+#define R_AVR32_GOT21S		32
+#define R_AVR32_GOT18SW		33
+#define R_AVR32_GOT16S		34
+#define R_AVR32_GOT7UW		35
+#define R_AVR32_32_CPENT	36
+#define R_AVR32_CPCALL		37
+#define R_AVR32_16_CP		38
+#define R_AVR32_9W_CP		39
+#define R_AVR32_RELATIVE	40
+#define R_AVR32_GLOB_DAT	41
+#define R_AVR32_JMP_SLOT	42
+#define R_AVR32_ALIGN		43
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof (elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fpu_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ( (x)->e_machine == EM_AVR32 )
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#ifdef __LITTLE_ENDIAN__
+#define ELF_DATA	ELFDATA2LSB
+#else
+#define ELF_DATA	ELFDATA2MSB
+#endif
+#define ELF_ARCH	EM_AVR32
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (2 * TASK_SIZE / 3)
+
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM  (NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
+
+#endif /* __ASM_AVR32_ELF_H */
diff --git a/arch/avr32/include/asm/emergency-restart.h b/arch/avr32/include/asm/emergency-restart.h
new file mode 100644
index 000000000000..3e7e014776ba
--- /dev/null
+++ b/arch/avr32/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_EMERGENCY_RESTART_H
+#define __ASM_AVR32_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* __ASM_AVR32_EMERGENCY_RESTART_H */
diff --git a/arch/avr32/include/asm/errno.h b/arch/avr32/include/asm/errno.h
new file mode 100644
index 000000000000..558a7249f06d
--- /dev/null
+++ b/arch/avr32/include/asm/errno.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_ERRNO_H
+#define __ASM_AVR32_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* __ASM_AVR32_ERRNO_H */
diff --git a/arch/avr32/include/asm/fb.h b/arch/avr32/include/asm/fb.h
new file mode 100644
index 000000000000..41baf84ad402
--- /dev/null
+++ b/arch/avr32/include/asm/fb.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	vma->vm_page_prot = __pgprot((pgprot_val(vma->vm_page_prot)
+				      & ~_PAGE_CACHABLE)
+				     | (_PAGE_BUFFER | _PAGE_DIRTY));
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/avr32/include/asm/fcntl.h b/arch/avr32/include/asm/fcntl.h
new file mode 100644
index 000000000000..14c0c4402b11
--- /dev/null
+++ b/arch/avr32/include/asm/fcntl.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_FCNTL_H
+#define __ASM_AVR32_FCNTL_H
+
+#include <asm-generic/fcntl.h>
+
+#endif /* __ASM_AVR32_FCNTL_H */
diff --git a/arch/avr32/include/asm/futex.h b/arch/avr32/include/asm/futex.h
new file mode 100644
index 000000000000..10419f14a68a
--- /dev/null
+++ b/arch/avr32/include/asm/futex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_FUTEX_H
+#define __ASM_AVR32_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif /* __ASM_AVR32_FUTEX_H */
diff --git a/arch/avr32/include/asm/gpio.h b/arch/avr32/include/asm/gpio.h
new file mode 100644
index 000000000000..b771f7105964
--- /dev/null
+++ b/arch/avr32/include/asm/gpio.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_GPIO_H
+#define __ASM_AVR32_GPIO_H
+
+#include <mach/gpio.h>
+
+#endif /* __ASM_AVR32_GPIO_H */
diff --git a/arch/avr32/include/asm/hardirq.h b/arch/avr32/include/asm/hardirq.h
new file mode 100644
index 000000000000..267354356f60
--- /dev/null
+++ b/arch/avr32/include/asm/hardirq.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_AVR32_HARDIRQ_H
+#define __ASM_AVR32_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <asm/irq.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cache.h>
+
+/* entry.S is sensitive to the offsets of these fields */
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+void ack_bad_irq(unsigned int irq);
+
+/* Standard mappings for irq_cpustat_t above */
+#include <linux/irq_cpustat.h>
+
+#endif /* __ASSEMBLY__ */
+
+#define HARDIRQ_BITS	12
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#endif /* __ASM_AVR32_HARDIRQ_H */
diff --git a/arch/avr32/include/asm/hw_irq.h b/arch/avr32/include/asm/hw_irq.h
new file mode 100644
index 000000000000..218b0a6bfd1b
--- /dev/null
+++ b/arch/avr32/include/asm/hw_irq.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_AVR32_HW_IRQ_H
+#define __ASM_AVR32_HW_IRQ_H
+
+static inline void hw_resend_irq(struct hw_interrupt_type *h, unsigned int i)
+{
+	/* Nothing to do */
+}
+
+#endif /* __ASM_AVR32_HW_IRQ_H */
diff --git a/arch/avr32/include/asm/io.h b/arch/avr32/include/asm/io.h
new file mode 100644
index 000000000000..a520f77ead96
--- /dev/null
+++ b/arch/avr32/include/asm/io.h
@@ -0,0 +1,312 @@
+#ifndef __ASM_AVR32_IO_H
+#define __ASM_AVR32_IO_H
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <asm/addrspace.h>
+#include <asm/byteorder.h>
+
+#include <mach/io.h>
+
+/* virt_to_phys will only work when address is in P1 or P2 */
+static __inline__ unsigned long virt_to_phys(volatile void *address)
+{
+	return PHYSADDR(address);
+}
+
+static __inline__ void * phys_to_virt(unsigned long address)
+{
+	return (void *)P1SEGADDR(address);
+}
+
+#define cached_to_phys(addr)	((unsigned long)PHYSADDR(addr))
+#define uncached_to_phys(addr)	((unsigned long)PHYSADDR(addr))
+#define phys_to_cached(addr)	((void *)P1SEGADDR(addr))
+#define phys_to_uncached(addr)	((void *)P2SEGADDR(addr))
+
+/*
+ * Generic IO read/write.  These perform native-endian accesses.  Note
+ * that some architectures will want to re-define __raw_{read,write}w.
+ */
+extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen);
+extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
+extern void __raw_writesl(void __iomem *addr, const void *data, int longlen);
+
+extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
+extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
+extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
+
+static inline void __raw_writeb(u8 v, volatile void __iomem *addr)
+{
+	*(volatile u8 __force *)addr = v;
+}
+static inline void __raw_writew(u16 v, volatile void __iomem *addr)
+{
+	*(volatile u16 __force *)addr = v;
+}
+static inline void __raw_writel(u32 v, volatile void __iomem *addr)
+{
+	*(volatile u32 __force *)addr = v;
+}
+
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	return *(const volatile u8 __force *)addr;
+}
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	return *(const volatile u16 __force *)addr;
+}
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	return *(const volatile u32 __force *)addr;
+}
+
+/* Convert I/O port address to virtual address */
+#ifndef __io
+# define __io(p)	((void *)phys_to_uncached(p))
+#endif
+
+/*
+ * Not really sure about the best way to slow down I/O on
+ * AVR32. Defining it as a no-op until we have an actual test case.
+ */
+#define SLOW_DOWN_IO	do { } while (0)
+
+#define __BUILD_MEMORY_SINGLE(pfx, bwl, type)				\
+static inline void							\
+pfx##write##bwl(type val, volatile void __iomem *addr)			\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr));	\
+	__val = pfx##ioswab##bwl(__addr, val);				\
+									\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	*__addr = __val;						\
+}									\
+									\
+static inline type pfx##read##bwl(const volatile void __iomem *addr)	\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr));	\
+									\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	__val = *__addr;						\
+	return pfx##ioswab##bwl(__addr, __val);				\
+}
+
+#define __BUILD_IOPORT_SINGLE(pfx, bwl, type, p, slow)			\
+static inline void pfx##out##bwl##p(type val, unsigned long port)	\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = __io(__swizzle_addr_##bwl(port));			\
+	__val = pfx##ioswab##bwl(__addr, val);				\
+									\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	*__addr = __val;						\
+	slow;								\
+}									\
+									\
+static inline type pfx##in##bwl##p(unsigned long port)			\
+{									\
+	volatile type *__addr;						\
+	type __val;							\
+									\
+	__addr = __io(__swizzle_addr_##bwl(port));			\
+									\
+	BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long));		\
+									\
+	__val = *__addr;						\
+	slow;								\
+									\
+	return pfx##ioswab##bwl(__addr, __val);				\
+}
+
+#define __BUILD_MEMORY_PFX(bus, bwl, type)				\
+	__BUILD_MEMORY_SINGLE(bus, bwl, type)
+
+#define BUILDIO_MEM(bwl, type)						\
+	__BUILD_MEMORY_PFX(, bwl, type)					\
+	__BUILD_MEMORY_PFX(__mem_, bwl, type)
+
+#define __BUILD_IOPORT_PFX(bus, bwl, type)				\
+	__BUILD_IOPORT_SINGLE(bus, bwl, type, ,)			\
+	__BUILD_IOPORT_SINGLE(bus, bwl, type, _p, SLOW_DOWN_IO)
+
+#define BUILDIO_IOPORT(bwl, type)					\
+	__BUILD_IOPORT_PFX(, bwl, type)					\
+	__BUILD_IOPORT_PFX(__mem_, bwl, type)
+
+BUILDIO_MEM(b, u8)
+BUILDIO_MEM(w, u16)
+BUILDIO_MEM(l, u32)
+
+BUILDIO_IOPORT(b, u8)
+BUILDIO_IOPORT(w, u16)
+BUILDIO_IOPORT(l, u32)
+
+#define readb_relaxed			readb
+#define readw_relaxed			readw
+#define readl_relaxed			readl
+
+#define __BUILD_MEMORY_STRING(bwl, type)				\
+static inline void writes##bwl(volatile void __iomem *addr,		\
+			       const void *data, unsigned int count)	\
+{									\
+	const type *__data = data;					\
+									\
+	while (count--)							\
+		__mem_write##bwl(*__data++, addr);			\
+}									\
+									\
+static inline void reads##bwl(const volatile void __iomem *addr,	\
+			      void *data, unsigned int count)		\
+{									\
+	type *__data = data;						\
+									\
+	while (count--)							\
+		*__data++ = __mem_read##bwl(addr);			\
+}
+
+#define __BUILD_IOPORT_STRING(bwl, type)				\
+static inline void outs##bwl(unsigned long port, const void *data,	\
+			     unsigned int count)			\
+{									\
+	const type *__data = data;					\
+									\
+	while (count--)							\
+		__mem_out##bwl(*__data++, port);			\
+}									\
+									\
+static inline void ins##bwl(unsigned long port, void *data,		\
+			   unsigned int count)				\
+{									\
+	type *__data = data;						\
+									\
+	while (count--)							\
+		*__data++ = __mem_in##bwl(port);			\
+}
+
+#define BUILDSTRING(bwl, type)						\
+	__BUILD_MEMORY_STRING(bwl, type)				\
+	__BUILD_IOPORT_STRING(bwl, type)
+
+BUILDSTRING(b, u8)
+BUILDSTRING(w, u16)
+BUILDSTRING(l, u32)
+
+/*
+ * io{read,write}{8,16,32} macros in both le (for PCI style consumers) and native be
+ */
+#ifndef ioread8
+
+#define ioread8(p)		((unsigned int)readb(p))
+
+#define ioread16(p)		((unsigned int)readw(p))
+#define ioread16be(p)		((unsigned int)__raw_readw(p))
+
+#define ioread32(p)		((unsigned int)readl(p))
+#define ioread32be(p)		((unsigned int)__raw_readl(p))
+
+#define iowrite8(v,p)		writeb(v, p)
+
+#define iowrite16(v,p)		writew(v, p)
+#define iowrite16be(v,p)	__raw_writew(v, p)
+
+#define iowrite32(v,p)		writel(v, p)
+#define iowrite32be(v,p)	__raw_writel(v, p)
+
+#define ioread8_rep(p,d,c)	readsb(p,d,c)
+#define ioread16_rep(p,d,c)	readsw(p,d,c)
+#define ioread32_rep(p,d,c)	readsl(p,d,c)
+
+#define iowrite8_rep(p,s,c)	writesb(p,s,c)
+#define iowrite16_rep(p,s,c)	writesw(p,s,c)
+#define iowrite32_rep(p,s,c)	writesl(p,s,c)
+
+#endif
+
+static inline void memcpy_fromio(void * to, const volatile void __iomem *from,
+				 unsigned long count)
+{
+	memcpy(to, (const void __force *)from, count);
+}
+
+static inline void  memcpy_toio(volatile void __iomem *to, const void * from,
+				unsigned long count)
+{
+	memcpy((void __force *)to, from, count);
+}
+
+static inline void memset_io(volatile void __iomem *addr, unsigned char val,
+			     unsigned long count)
+{
+	memset((void __force *)addr, val, count);
+}
+
+#define mmiowb()
+
+#define IO_SPACE_LIMIT	0xffffffff
+
+extern void __iomem *__ioremap(unsigned long offset, size_t size,
+			       unsigned long flags);
+extern void __iounmap(void __iomem *addr);
+
+/*
+ * ioremap	-   map bus memory into CPU space
+ * @offset	bus address of the memory
+ * @size	size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to make
+ * bus memory CPU accessible via the readb/.../writel functions and
+ * the other mmio helpers. The returned address is not guaranteed to
+ * be usable directly as a virtual address.
+ */
+#define ioremap(offset, size)			\
+	__ioremap((offset), (size), 0)
+
+#define ioremap_nocache(offset, size)		\
+	__ioremap((offset), (size), 0)
+
+#define iounmap(addr)				\
+	__iounmap(addr)
+
+#define cached(addr) P1SEGADDR(addr)
+#define uncached(addr) P2SEGADDR(addr)
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+#define page_to_bus page_to_phys
+#define bus_to_page phys_to_page
+
+/*
+ * Create a virtual mapping cookie for an IO port range.  There exists
+ * no such thing as port-based I/O on AVR32, so a regular ioremap()
+ * should do what we need.
+ */
+#define ioport_map(port, nr)	ioremap(port, nr)
+#define ioport_unmap(port)	iounmap(port)
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)    __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)   p
+
+#endif /* __ASM_AVR32_IO_H */
diff --git a/arch/avr32/include/asm/ioctl.h b/arch/avr32/include/asm/ioctl.h
new file mode 100644
index 000000000000..c8472c1398ef
--- /dev/null
+++ b/arch/avr32/include/asm/ioctl.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_IOCTL_H
+#define __ASM_AVR32_IOCTL_H
+
+#include <asm-generic/ioctl.h>
+
+#endif /* __ASM_AVR32_IOCTL_H */
diff --git a/arch/avr32/include/asm/ioctls.h b/arch/avr32/include/asm/ioctls.h
new file mode 100644
index 000000000000..0cf2c0a4502b
--- /dev/null
+++ b/arch/avr32/include/asm/ioctls.h
@@ -0,0 +1,87 @@
+#ifndef __ASM_AVR32_IOCTLS_H
+#define __ASM_AVR32_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402 /* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+/* #define TIOCTTYGSTRUCT 0x5426 - Former debugging-only ioctl */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T',0x2A, struct termios2)
+#define TCSETS2		_IOW('T',0x2B, struct termios2)
+#define TCSETSW2	_IOW('T',0x2C, struct termios2)
+#define TCSETSF2	_IOW('T',0x2D, struct termios2)
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE	0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* __ASM_AVR32_IOCTLS_H */
diff --git a/arch/avr32/include/asm/ipcbuf.h b/arch/avr32/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..1552c9698f5e
--- /dev/null
+++ b/arch/avr32/include/asm/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __ASM_AVR32_IPCBUF_H
+#define __ASM_AVR32_IPCBUF_H
+
+/*
+* The user_ipc_perm structure for AVR32 architecture.
+* Note extra padding because this structure is passed back and forth
+* between kernel and user space.
+*
+* Pad space is left for:
+* - 32-bit mode_t and seq
+* - 2 miscellaneous 32-bit values
+*/
+
+struct ipc64_perm
+{
+        __kernel_key_t          key;
+        __kernel_uid32_t        uid;
+        __kernel_gid32_t        gid;
+        __kernel_uid32_t        cuid;
+        __kernel_gid32_t        cgid;
+        __kernel_mode_t         mode;
+        unsigned short          __pad1;
+        unsigned short          seq;
+        unsigned short          __pad2;
+        unsigned long           __unused1;
+        unsigned long           __unused2;
+};
+
+#endif /* __ASM_AVR32_IPCBUF_H */
diff --git a/arch/avr32/include/asm/irq.h b/arch/avr32/include/asm/irq.h
new file mode 100644
index 000000000000..6fa8913f8548
--- /dev/null
+++ b/arch/avr32/include/asm/irq.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_AVR32_IRQ_H
+#define __ASM_AVR32_IRQ_H
+
+#define NR_INTERNAL_IRQS	64
+
+#include <mach/irq.h>
+
+#ifndef NR_IRQS
+#define NR_IRQS			(NR_INTERNAL_IRQS)
+#endif
+
+#define irq_canonicalize(i)	(i)
+
+#ifndef __ASSEMBLER__
+int nmi_enable(void);
+void nmi_disable(void);
+
+/*
+ * Returns a bitmask of pending interrupts in a group.
+ */
+extern unsigned long intc_get_pending(unsigned int group);
+#endif
+
+#endif /* __ASM_AVR32_IOCTLS_H */
diff --git a/arch/avr32/include/asm/irq_regs.h b/arch/avr32/include/asm/irq_regs.h
new file mode 100644
index 000000000000..3dd9c0b70270
--- /dev/null
+++ b/arch/avr32/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/avr32/include/asm/irqflags.h b/arch/avr32/include/asm/irqflags.h
new file mode 100644
index 000000000000..93570daac38a
--- /dev/null
+++ b/arch/avr32/include/asm/irqflags.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_IRQFLAGS_H
+#define __ASM_AVR32_IRQFLAGS_H
+
+#include <asm/sysreg.h>
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	return sysreg_read(SR);
+}
+
+#define raw_local_save_flags(x)					\
+	do { (x) = __raw_local_save_flags(); } while (0)
+
+/*
+ * This will restore ALL status register flags, not only the interrupt
+ * mask flag.
+ *
+ * The empty asm statement informs the compiler of this fact while
+ * also serving as a barrier.
+ */
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	sysreg_write(SR, flags);
+	asm volatile("" : : : "memory", "cc");
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	asm volatile("ssrf %0" : : "n"(SYSREG_GM_OFFSET) : "memory");
+}
+
+static inline void raw_local_irq_enable(void)
+{
+	asm volatile("csrf %0" : : "n"(SYSREG_GM_OFFSET) : "memory");
+}
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return (flags & SYSREG_BIT(GM)) != 0;
+}
+
+static inline int raw_irqs_disabled(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	return raw_irqs_disabled_flags(flags);
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	raw_local_irq_disable();
+
+	return flags;
+}
+
+#define raw_local_irq_save(flags)				\
+	do { (flags) = __raw_local_irq_save(); } while (0)
+
+#endif /* __ASM_AVR32_IRQFLAGS_H */
diff --git a/arch/avr32/include/asm/kdebug.h b/arch/avr32/include/asm/kdebug.h
new file mode 100644
index 000000000000..ca4f9542365a
--- /dev/null
+++ b/arch/avr32/include/asm/kdebug.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_AVR32_KDEBUG_H
+#define __ASM_AVR32_KDEBUG_H
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_BREAKPOINT,
+	DIE_SSTEP,
+	DIE_NMI,
+};
+
+#endif /* __ASM_AVR32_KDEBUG_H */
diff --git a/arch/avr32/include/asm/kmap_types.h b/arch/avr32/include/asm/kmap_types.h
new file mode 100644
index 000000000000..b7f5c6870107
--- /dev/null
+++ b/arch/avr32/include/asm/kmap_types.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_AVR32_KMAP_TYPES_H
+#define __ASM_AVR32_KMAP_TYPES_H
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_PTE2,
+D(10)	KM_IRQ0,
+D(11)	KM_IRQ1,
+D(12)	KM_SOFTIRQ0,
+D(13)	KM_SOFTIRQ1,
+D(14)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif /* __ASM_AVR32_KMAP_TYPES_H */
diff --git a/arch/avr32/include/asm/kprobes.h b/arch/avr32/include/asm/kprobes.h
new file mode 100644
index 000000000000..996cb656474e
--- /dev/null
+++ b/arch/avr32/include/asm/kprobes.h
@@ -0,0 +1,35 @@
+/*
+ * Kernel Probes (KProbes)
+ *
+ * Copyright (C) 2005-2006 Atmel Corporation
+ * Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_KPROBES_H
+#define __ASM_AVR32_KPROBES_H
+
+#include <linux/types.h>
+
+typedef u16	kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION	0xd673	/* breakpoint */
+#define MAX_INSN_SIZE		2
+
+#define kretprobe_blacklist_size 0
+
+#define arch_remove_kprobe(p)	do { } while (0)
+
+/* Architecture specific copy of original instruction */
+struct arch_specific_insn {
+	kprobe_opcode_t	insn[MAX_INSN_SIZE];
+};
+
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+
+#define flush_insn_slot(p)	do { } while (0)
+
+#endif /* __ASM_AVR32_KPROBES_H */
diff --git a/arch/avr32/include/asm/linkage.h b/arch/avr32/include/asm/linkage.h
new file mode 100644
index 000000000000..f7b285e910d4
--- /dev/null
+++ b/arch/avr32/include/asm/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .balign 2
+#define __ALIGN_STR ".balign 2"
+
+#endif /* __ASM_LINKAGE_H */
diff --git a/arch/avr32/include/asm/local.h b/arch/avr32/include/asm/local.h
new file mode 100644
index 000000000000..1c1619694da3
--- /dev/null
+++ b/arch/avr32/include/asm/local.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_LOCAL_H
+#define __ASM_AVR32_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* __ASM_AVR32_LOCAL_H */
diff --git a/arch/avr32/include/asm/mach/serial_at91.h b/arch/avr32/include/asm/mach/serial_at91.h
new file mode 100644
index 000000000000..55b317a89061
--- /dev/null
+++ b/arch/avr32/include/asm/mach/serial_at91.h
@@ -0,0 +1,33 @@
+/*
+ *  linux/include/asm-arm/mach/serial_at91.h
+ *
+ *  Based on serial_sa1100.h  by Nicolas Pitre
+ *
+ *  Copyright (C) 2002 ATMEL Rousset
+ *
+ *  Low level machine dependent UART functions.
+ */
+
+struct uart_port;
+
+/*
+ * This is a temporary structure for registering these
+ * functions; it is intended to be discarded after boot.
+ */
+struct atmel_port_fns {
+	void	(*set_mctrl)(struct uart_port *, u_int);
+	u_int	(*get_mctrl)(struct uart_port *);
+	void	(*enable_ms)(struct uart_port *);
+	void	(*pm)(struct uart_port *, u_int, u_int);
+	int	(*set_wake)(struct uart_port *, u_int);
+	int	(*open)(struct uart_port *);
+	void	(*close)(struct uart_port *);
+};
+
+#if defined(CONFIG_SERIAL_ATMEL)
+void atmel_register_uart_fns(struct atmel_port_fns *fns);
+#else
+#define atmel_register_uart_fns(fns) do { } while (0)
+#endif
+
+
diff --git a/arch/avr32/include/asm/mman.h b/arch/avr32/include/asm/mman.h
new file mode 100644
index 000000000000..648f91e7187a
--- /dev/null
+++ b/arch/avr32/include/asm/mman.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_AVR32_MMAN_H__
+#define __ASM_AVR32_MMAN_H__
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#endif /* __ASM_AVR32_MMAN_H__ */
diff --git a/arch/avr32/include/asm/mmu.h b/arch/avr32/include/asm/mmu.h
new file mode 100644
index 000000000000..60c2d2650d32
--- /dev/null
+++ b/arch/avr32/include/asm/mmu.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_AVR32_MMU_H
+#define __ASM_AVR32_MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+#define MMU_ITLB_ENTRIES	64
+#define MMU_DTLB_ENTRIES	64
+
+#endif /* __ASM_AVR32_MMU_H */
diff --git a/arch/avr32/include/asm/mmu_context.h b/arch/avr32/include/asm/mmu_context.h
new file mode 100644
index 000000000000..27ff23407100
--- /dev/null
+++ b/arch/avr32/include/asm/mmu_context.h
@@ -0,0 +1,148 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * ASID handling taken from SH implementation.
+ *   Copyright (C) 1999 Niibe Yutaka
+ *   Copyright (C) 2003 Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_MMU_CONTEXT_H
+#define __ASM_AVR32_MMU_CONTEXT_H
+
+#include <asm/tlbflush.h>
+#include <asm/sysreg.h>
+#include <asm-generic/mm_hooks.h>
+
+/*
+ * The MMU "context" consists of two things:
+ *    (a) TLB cache version
+ *    (b) ASID (Address Space IDentifier)
+ */
+#define MMU_CONTEXT_ASID_MASK		0x000000ff
+#define MMU_CONTEXT_VERSION_MASK	0xffffff00
+#define MMU_CONTEXT_FIRST_VERSION       0x00000100
+#define NO_CONTEXT			0
+
+#define MMU_NO_ASID			0x100
+
+/* Virtual Page Number mask */
+#define MMU_VPN_MASK	0xfffff000
+
+/* Cache of MMU context last used */
+extern unsigned long mmu_context_cache;
+
+/*
+ * Get MMU context if needed
+ */
+static inline void
+get_mmu_context(struct mm_struct *mm)
+{
+	unsigned long mc = mmu_context_cache;
+
+	if (((mm->context ^ mc) & MMU_CONTEXT_VERSION_MASK) == 0)
+		/* It's up to date, do nothing */
+		return;
+
+	/* It's old, we need to get new context with new version */
+	mc = ++mmu_context_cache;
+	if (!(mc & MMU_CONTEXT_ASID_MASK)) {
+		/*
+		 * We have exhausted all ASIDs of this version.
+		 * Flush the TLB and start new cycle.
+		 */
+		flush_tlb_all();
+		/*
+		 * Fix version. Note that we avoid version #0
+		 * to distinguish NO_CONTEXT.
+		 */
+		if (!mc)
+			mmu_context_cache = mc = MMU_CONTEXT_FIRST_VERSION;
+	}
+	mm->context = mc;
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static inline int init_new_context(struct task_struct *tsk,
+				       struct mm_struct *mm)
+{
+	mm->context = NO_CONTEXT;
+	return 0;
+}
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	/* Do nothing */
+}
+
+static inline void set_asid(unsigned long asid)
+{
+	/* XXX: We're destroying TLBEHI[8:31] */
+	sysreg_write(TLBEHI, asid & MMU_CONTEXT_ASID_MASK);
+	cpu_sync_pipeline();
+}
+
+static inline unsigned long get_asid(void)
+{
+	unsigned long asid;
+
+	asid = sysreg_read(TLBEHI);
+	return asid & MMU_CONTEXT_ASID_MASK;
+}
+
+static inline void activate_context(struct mm_struct *mm)
+{
+	get_mmu_context(mm);
+	set_asid(mm->context & MMU_CONTEXT_ASID_MASK);
+}
+
+static inline void switch_mm(struct mm_struct *prev,
+				 struct mm_struct *next,
+				 struct task_struct *tsk)
+{
+	if (likely(prev != next)) {
+		unsigned long __pgdir = (unsigned long)next->pgd;
+
+		sysreg_write(PTBR, __pgdir);
+		activate_context(next);
+	}
+}
+
+#define deactivate_mm(tsk,mm) do { } while(0)
+
+#define activate_mm(prev, next) switch_mm((prev), (next), NULL)
+
+static inline void
+enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+
+static inline void enable_mmu(void)
+{
+	sysreg_write(MMUCR, (SYSREG_BIT(MMUCR_S)
+			     | SYSREG_BIT(E)
+			     | SYSREG_BIT(MMUCR_I)));
+	nop(); nop(); nop(); nop(); nop(); nop(); nop(); nop();
+
+	if (mmu_context_cache == NO_CONTEXT)
+		mmu_context_cache = MMU_CONTEXT_FIRST_VERSION;
+
+	set_asid(mmu_context_cache & MMU_CONTEXT_ASID_MASK);
+}
+
+static inline void disable_mmu(void)
+{
+	sysreg_write(MMUCR, SYSREG_BIT(MMUCR_S));
+}
+
+#endif /* __ASM_AVR32_MMU_CONTEXT_H */
diff --git a/arch/avr32/include/asm/module.h b/arch/avr32/include/asm/module.h
new file mode 100644
index 000000000000..451444538a1b
--- /dev/null
+++ b/arch/avr32/include/asm/module.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_AVR32_MODULE_H
+#define __ASM_AVR32_MODULE_H
+
+struct mod_arch_syminfo {
+	unsigned long got_offset;
+	int got_initialized;
+};
+
+struct mod_arch_specific {
+	/* Starting offset of got in the module core memory. */
+	unsigned long got_offset;
+	/* Size of the got. */
+	unsigned long got_size;
+	/* Number of symbols in syminfo. */
+	int nsyms;
+	/* Additional symbol information (got offsets). */
+	struct mod_arch_syminfo *syminfo;
+};
+
+#define Elf_Shdr		Elf32_Shdr
+#define Elf_Sym			Elf32_Sym
+#define Elf_Ehdr		Elf32_Ehdr
+
+#define MODULE_PROC_FAMILY "AVR32v1"
+
+#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
+
+#endif /* __ASM_AVR32_MODULE_H */
diff --git a/arch/avr32/include/asm/msgbuf.h b/arch/avr32/include/asm/msgbuf.h
new file mode 100644
index 000000000000..ac18bc4da7f7
--- /dev/null
+++ b/arch/avr32/include/asm/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef __ASM_AVR32_MSGBUF_H
+#define __ASM_AVR32_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* __ASM_AVR32_MSGBUF_H */
diff --git a/arch/avr32/include/asm/mutex.h b/arch/avr32/include/asm/mutex.h
new file mode 100644
index 000000000000..458c1f7fbc18
--- /dev/null
+++ b/arch/avr32/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/avr32/include/asm/numnodes.h b/arch/avr32/include/asm/numnodes.h
new file mode 100644
index 000000000000..0b864d7ce330
--- /dev/null
+++ b/arch/avr32/include/asm/numnodes.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_AVR32_NUMNODES_H
+#define __ASM_AVR32_NUMNODES_H
+
+/* Max 4 nodes */
+#define NODES_SHIFT	2
+
+#endif /* __ASM_AVR32_NUMNODES_H */
diff --git a/arch/avr32/include/asm/ocd.h b/arch/avr32/include/asm/ocd.h
new file mode 100644
index 000000000000..6bef09490235
--- /dev/null
+++ b/arch/avr32/include/asm/ocd.h
@@ -0,0 +1,543 @@
+/*
+ * AVR32 OCD Interface and register definitions
+ *
+ * Copyright (C) 2004-2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_OCD_H
+#define __ASM_AVR32_OCD_H
+
+/* OCD Register offsets. Abbreviations used below:
+ *
+ *      BP      Breakpoint
+ *      Comm    Communication
+ *      DT      Data Trace
+ *      PC      Program Counter
+ *      PID     Process ID
+ *      R/W     Read/Write
+ *      WP      Watchpoint
+ */
+#define OCD_DID				0x0000  /* Device ID */
+#define OCD_DC				0x0008  /* Development Control */
+#define OCD_DS				0x0010  /* Development Status */
+#define OCD_RWCS			0x001c  /* R/W Access Control */
+#define OCD_RWA				0x0024  /* R/W Access Address */
+#define OCD_RWD				0x0028  /* R/W Access Data */
+#define OCD_WT				0x002c  /* Watchpoint Trigger */
+#define OCD_DTC				0x0034  /* Data Trace Control */
+#define OCD_DTSA0			0x0038  /* DT Start Addr Channel 0 */
+#define OCD_DTSA1			0x003c  /* DT Start Addr Channel 1 */
+#define OCD_DTEA0			0x0048  /* DT End Addr Channel 0 */
+#define OCD_DTEA1			0x004c  /* DT End Addr Channel 1 */
+#define OCD_BWC0A			0x0058  /* PC BP/WP Control 0A */
+#define OCD_BWC0B			0x005c  /* PC BP/WP Control 0B */
+#define OCD_BWC1A			0x0060  /* PC BP/WP Control 1A */
+#define OCD_BWC1B			0x0064  /* PC BP/WP Control 1B */
+#define OCD_BWC2A			0x0068  /* PC BP/WP Control 2A */
+#define OCD_BWC2B			0x006c  /* PC BP/WP Control 2B */
+#define OCD_BWC3A			0x0070  /* Data BP/WP Control 3A */
+#define OCD_BWC3B			0x0074  /* Data BP/WP Control 3B */
+#define OCD_BWA0A			0x0078  /* PC BP/WP Address 0A */
+#define OCD_BWA0B			0x007c  /* PC BP/WP Address 0B */
+#define OCD_BWA1A			0x0080  /* PC BP/WP Address 1A */
+#define OCD_BWA1B			0x0084  /* PC BP/WP Address 1B */
+#define OCD_BWA2A			0x0088  /* PC BP/WP Address 2A */
+#define OCD_BWA2B			0x008c  /* PC BP/WP Address 2B */
+#define OCD_BWA3A			0x0090  /* Data BP/WP Address 3A */
+#define OCD_BWA3B			0x0094  /* Data BP/WP Address 3B */
+#define OCD_NXCFG			0x0100  /* Nexus Configuration */
+#define OCD_DINST			0x0104  /* Debug Instruction */
+#define OCD_DPC				0x0108  /* Debug Program Counter */
+#define OCD_CPUCM			0x010c  /* CPU Control Mask */
+#define OCD_DCCPU			0x0110  /* Debug Comm CPU */
+#define OCD_DCEMU			0x0114  /* Debug Comm Emulator */
+#define OCD_DCSR			0x0118  /* Debug Comm Status */
+#define OCD_PID				0x011c  /* Ownership Trace PID */
+#define OCD_EPC0			0x0120  /* Event Pair Control 0 */
+#define OCD_EPC1			0x0124  /* Event Pair Control 1 */
+#define OCD_EPC2			0x0128  /* Event Pair Control 2 */
+#define OCD_EPC3			0x012c  /* Event Pair Control 3 */
+#define OCD_AXC				0x0130  /* AUX port Control */
+
+/* Bits in DID */
+#define OCD_DID_MID_START		1
+#define OCD_DID_MID_SIZE		11
+#define OCD_DID_PN_START		12
+#define OCD_DID_PN_SIZE			16
+#define OCD_DID_RN_START		28
+#define OCD_DID_RN_SIZE			4
+
+/* Bits in DC */
+#define OCD_DC_TM_START			0
+#define OCD_DC_TM_SIZE			2
+#define OCD_DC_EIC_START		3
+#define OCD_DC_EIC_SIZE			2
+#define OCD_DC_OVC_START		5
+#define OCD_DC_OVC_SIZE			3
+#define OCD_DC_SS_BIT			8
+#define OCD_DC_DBR_BIT			12
+#define OCD_DC_DBE_BIT			13
+#define OCD_DC_EOS_START		20
+#define OCD_DC_EOS_SIZE			2
+#define OCD_DC_SQA_BIT			22
+#define OCD_DC_IRP_BIT			23
+#define OCD_DC_IFM_BIT			24
+#define OCD_DC_TOZ_BIT			25
+#define OCD_DC_TSR_BIT			26
+#define OCD_DC_RID_BIT			27
+#define OCD_DC_ORP_BIT			28
+#define OCD_DC_MM_BIT			29
+#define OCD_DC_RES_BIT			30
+#define OCD_DC_ABORT_BIT		31
+
+/* Bits in DS */
+#define OCD_DS_SSS_BIT			0
+#define OCD_DS_SWB_BIT			1
+#define OCD_DS_HWB_BIT			2
+#define OCD_DS_HWE_BIT			3
+#define OCD_DS_STP_BIT			4
+#define OCD_DS_DBS_BIT			5
+#define OCD_DS_BP_START			8
+#define OCD_DS_BP_SIZE			8
+#define OCD_DS_INC_BIT			24
+#define OCD_DS_BOZ_BIT			25
+#define OCD_DS_DBA_BIT			26
+#define OCD_DS_EXB_BIT			27
+#define OCD_DS_NTBF_BIT			28
+
+/* Bits in RWCS */
+#define OCD_RWCS_DV_BIT			0
+#define OCD_RWCS_ERR_BIT		1
+#define OCD_RWCS_CNT_START		2
+#define OCD_RWCS_CNT_SIZE		14
+#define OCD_RWCS_CRC_BIT		19
+#define OCD_RWCS_NTBC_START		20
+#define OCD_RWCS_NTBC_SIZE		2
+#define OCD_RWCS_NTE_BIT		22
+#define OCD_RWCS_NTAP_BIT		23
+#define OCD_RWCS_WRAPPED_BIT		24
+#define OCD_RWCS_CCTRL_START		25
+#define OCD_RWCS_CCTRL_SIZE		2
+#define OCD_RWCS_SZ_START		27
+#define OCD_RWCS_SZ_SIZE		3
+#define OCD_RWCS_RW_BIT			30
+#define OCD_RWCS_AC_BIT			31
+
+/* Bits in RWA */
+#define OCD_RWA_RWA_START		0
+#define OCD_RWA_RWA_SIZE		32
+
+/* Bits in RWD */
+#define OCD_RWD_RWD_START		0
+#define OCD_RWD_RWD_SIZE		32
+
+/* Bits in WT */
+#define OCD_WT_DTE_START		20
+#define OCD_WT_DTE_SIZE			3
+#define OCD_WT_DTS_START		23
+#define OCD_WT_DTS_SIZE			3
+#define OCD_WT_PTE_START		26
+#define OCD_WT_PTE_SIZE			3
+#define OCD_WT_PTS_START		29
+#define OCD_WT_PTS_SIZE			3
+
+/* Bits in DTC */
+#define OCD_DTC_T0WP_BIT		0
+#define OCD_DTC_T1WP_BIT		1
+#define OCD_DTC_ASID0EN_BIT		2
+#define OCD_DTC_ASID0_START		3
+#define OCD_DTC_ASID0_SIZE		8
+#define OCD_DTC_ASID1EN_BIT		11
+#define OCD_DTC_ASID1_START		12
+#define OCD_DTC_ASID1_SIZE		8
+#define OCD_DTC_RWT1_START		28
+#define OCD_DTC_RWT1_SIZE		2
+#define OCD_DTC_RWT0_START		30
+#define OCD_DTC_RWT0_SIZE		2
+
+/* Bits in DTSA0 */
+#define OCD_DTSA0_DTSA_START		0
+#define OCD_DTSA0_DTSA_SIZE		32
+
+/* Bits in DTSA1 */
+#define OCD_DTSA1_DTSA_START		0
+#define OCD_DTSA1_DTSA_SIZE		32
+
+/* Bits in DTEA0 */
+#define OCD_DTEA0_DTEA_START		0
+#define OCD_DTEA0_DTEA_SIZE		32
+
+/* Bits in DTEA1 */
+#define OCD_DTEA1_DTEA_START		0
+#define OCD_DTEA1_DTEA_SIZE		32
+
+/* Bits in BWC0A */
+#define OCD_BWC0A_ASIDEN_BIT		0
+#define OCD_BWC0A_ASID_START		1
+#define OCD_BWC0A_ASID_SIZE		8
+#define OCD_BWC0A_EOC_BIT		14
+#define OCD_BWC0A_AME_BIT		25
+#define OCD_BWC0A_BWE_START		30
+#define OCD_BWC0A_BWE_SIZE		2
+
+/* Bits in BWC0B */
+#define OCD_BWC0B_ASIDEN_BIT		0
+#define OCD_BWC0B_ASID_START		1
+#define OCD_BWC0B_ASID_SIZE		8
+#define OCD_BWC0B_EOC_BIT		14
+#define OCD_BWC0B_AME_BIT		25
+#define OCD_BWC0B_BWE_START		30
+#define OCD_BWC0B_BWE_SIZE		2
+
+/* Bits in BWC1A */
+#define OCD_BWC1A_ASIDEN_BIT		0
+#define OCD_BWC1A_ASID_START		1
+#define OCD_BWC1A_ASID_SIZE		8
+#define OCD_BWC1A_EOC_BIT		14
+#define OCD_BWC1A_AME_BIT		25
+#define OCD_BWC1A_BWE_START		30
+#define OCD_BWC1A_BWE_SIZE		2
+
+/* Bits in BWC1B */
+#define OCD_BWC1B_ASIDEN_BIT		0
+#define OCD_BWC1B_ASID_START		1
+#define OCD_BWC1B_ASID_SIZE		8
+#define OCD_BWC1B_EOC_BIT		14
+#define OCD_BWC1B_AME_BIT		25
+#define OCD_BWC1B_BWE_START		30
+#define OCD_BWC1B_BWE_SIZE		2
+
+/* Bits in BWC2A */
+#define OCD_BWC2A_ASIDEN_BIT		0
+#define OCD_BWC2A_ASID_START		1
+#define OCD_BWC2A_ASID_SIZE		8
+#define OCD_BWC2A_EOC_BIT		14
+#define OCD_BWC2A_AMB_START		20
+#define OCD_BWC2A_AMB_SIZE		5
+#define OCD_BWC2A_AME_BIT		25
+#define OCD_BWC2A_BWE_START		30
+#define OCD_BWC2A_BWE_SIZE		2
+
+/* Bits in BWC2B */
+#define OCD_BWC2B_ASIDEN_BIT		0
+#define OCD_BWC2B_ASID_START		1
+#define OCD_BWC2B_ASID_SIZE		8
+#define OCD_BWC2B_EOC_BIT		14
+#define OCD_BWC2B_AME_BIT		25
+#define OCD_BWC2B_BWE_START		30
+#define OCD_BWC2B_BWE_SIZE		2
+
+/* Bits in BWC3A */
+#define OCD_BWC3A_ASIDEN_BIT		0
+#define OCD_BWC3A_ASID_START		1
+#define OCD_BWC3A_ASID_SIZE		8
+#define OCD_BWC3A_SIZE_START		9
+#define OCD_BWC3A_SIZE_SIZE		3
+#define OCD_BWC3A_EOC_BIT		14
+#define OCD_BWC3A_BWO_START		16
+#define OCD_BWC3A_BWO_SIZE		2
+#define OCD_BWC3A_BME_START		20
+#define OCD_BWC3A_BME_SIZE		4
+#define OCD_BWC3A_BRW_START		28
+#define OCD_BWC3A_BRW_SIZE		2
+#define OCD_BWC3A_BWE_START		30
+#define OCD_BWC3A_BWE_SIZE		2
+
+/* Bits in BWC3B */
+#define OCD_BWC3B_ASIDEN_BIT		0
+#define OCD_BWC3B_ASID_START		1
+#define OCD_BWC3B_ASID_SIZE		8
+#define OCD_BWC3B_SIZE_START		9
+#define OCD_BWC3B_SIZE_SIZE		3
+#define OCD_BWC3B_EOC_BIT		14
+#define OCD_BWC3B_BWO_START		16
+#define OCD_BWC3B_BWO_SIZE		2
+#define OCD_BWC3B_BME_START		20
+#define OCD_BWC3B_BME_SIZE		4
+#define OCD_BWC3B_BRW_START		28
+#define OCD_BWC3B_BRW_SIZE		2
+#define OCD_BWC3B_BWE_START		30
+#define OCD_BWC3B_BWE_SIZE		2
+
+/* Bits in BWA0A */
+#define OCD_BWA0A_BWA_START		0
+#define OCD_BWA0A_BWA_SIZE		32
+
+/* Bits in BWA0B */
+#define OCD_BWA0B_BWA_START		0
+#define OCD_BWA0B_BWA_SIZE		32
+
+/* Bits in BWA1A */
+#define OCD_BWA1A_BWA_START		0
+#define OCD_BWA1A_BWA_SIZE		32
+
+/* Bits in BWA1B */
+#define OCD_BWA1B_BWA_START		0
+#define OCD_BWA1B_BWA_SIZE		32
+
+/* Bits in BWA2A */
+#define OCD_BWA2A_BWA_START		0
+#define OCD_BWA2A_BWA_SIZE		32
+
+/* Bits in BWA2B */
+#define OCD_BWA2B_BWA_START		0
+#define OCD_BWA2B_BWA_SIZE		32
+
+/* Bits in BWA3A */
+#define OCD_BWA3A_BWA_START		0
+#define OCD_BWA3A_BWA_SIZE		32
+
+/* Bits in BWA3B */
+#define OCD_BWA3B_BWA_START		0
+#define OCD_BWA3B_BWA_SIZE		32
+
+/* Bits in NXCFG */
+#define OCD_NXCFG_NXARCH_START		0
+#define OCD_NXCFG_NXARCH_SIZE		4
+#define OCD_NXCFG_NXOCD_START		4
+#define OCD_NXCFG_NXOCD_SIZE		4
+#define OCD_NXCFG_NXPCB_START		8
+#define OCD_NXCFG_NXPCB_SIZE		4
+#define OCD_NXCFG_NXDB_START		12
+#define OCD_NXCFG_NXDB_SIZE		4
+#define OCD_NXCFG_MXMSEO_BIT		16
+#define OCD_NXCFG_NXMDO_START		17
+#define OCD_NXCFG_NXMDO_SIZE		4
+#define OCD_NXCFG_NXPT_BIT		21
+#define OCD_NXCFG_NXOT_BIT		22
+#define OCD_NXCFG_NXDWT_BIT		23
+#define OCD_NXCFG_NXDRT_BIT		24
+#define OCD_NXCFG_NXDTC_START		25
+#define OCD_NXCFG_NXDTC_SIZE		3
+#define OCD_NXCFG_NXDMA_BIT		28
+
+/* Bits in DINST */
+#define OCD_DINST_DINST_START		0
+#define OCD_DINST_DINST_SIZE		32
+
+/* Bits in CPUCM */
+#define OCD_CPUCM_BEM_BIT		1
+#define OCD_CPUCM_FEM_BIT		2
+#define OCD_CPUCM_REM_BIT		3
+#define OCD_CPUCM_IBEM_BIT		4
+#define OCD_CPUCM_IEEM_BIT		5
+
+/* Bits in DCCPU */
+#define OCD_DCCPU_DATA_START		0
+#define OCD_DCCPU_DATA_SIZE		32
+
+/* Bits in DCEMU */
+#define OCD_DCEMU_DATA_START		0
+#define OCD_DCEMU_DATA_SIZE		32
+
+/* Bits in DCSR */
+#define OCD_DCSR_CPUD_BIT		0
+#define OCD_DCSR_EMUD_BIT		1
+
+/* Bits in PID */
+#define OCD_PID_PROCESS_START		0
+#define OCD_PID_PROCESS_SIZE		32
+
+/* Bits in EPC0 */
+#define OCD_EPC0_RNG_START		0
+#define OCD_EPC0_RNG_SIZE		2
+#define OCD_EPC0_CE_BIT			4
+#define OCD_EPC0_ECNT_START		16
+#define OCD_EPC0_ECNT_SIZE		16
+
+/* Bits in EPC1 */
+#define OCD_EPC1_RNG_START		0
+#define OCD_EPC1_RNG_SIZE		2
+#define OCD_EPC1_ATB_BIT		5
+#define OCD_EPC1_AM_BIT			6
+
+/* Bits in EPC2 */
+#define OCD_EPC2_RNG_START		0
+#define OCD_EPC2_RNG_SIZE		2
+#define OCD_EPC2_DB_START		2
+#define OCD_EPC2_DB_SIZE		2
+
+/* Bits in EPC3 */
+#define OCD_EPC3_RNG_START		0
+#define OCD_EPC3_RNG_SIZE		2
+#define OCD_EPC3_DWE_BIT		2
+
+/* Bits in AXC */
+#define OCD_AXC_DIV_START		0
+#define OCD_AXC_DIV_SIZE		4
+#define OCD_AXC_AXE_BIT			8
+#define OCD_AXC_AXS_BIT			9
+#define OCD_AXC_DDR_BIT			10
+#define OCD_AXC_LS_BIT			11
+#define OCD_AXC_REX_BIT			12
+#define OCD_AXC_REXTEN_BIT		13
+
+/* Constants for DC:EIC */
+#define OCD_EIC_PROGRAM_AND_DATA_TRACE	0
+#define OCD_EIC_BREAKPOINT		1
+#define OCD_EIC_NOP			2
+
+/* Constants for DC:OVC */
+#define OCD_OVC_OVERRUN			0
+#define OCD_OVC_DELAY_CPU_BTM		1
+#define OCD_OVC_DELAY_CPU_DTM		2
+#define OCD_OVC_DELAY_CPU_BTM_DTM	3
+
+/* Constants for DC:EOS */
+#define OCD_EOS_NOP			0
+#define OCD_EOS_DEBUG_MODE		1
+#define OCD_EOS_BREAKPOINT_WATCHPOINT	2
+#define OCD_EOS_THQ			3
+
+/* Constants for RWCS:NTBC */
+#define OCD_NTBC_OVERWRITE		0
+#define OCD_NTBC_DISABLE		1
+#define OCD_NTBC_BREAKPOINT		2
+
+/* Constants for RWCS:CCTRL */
+#define OCD_CCTRL_AUTO			0
+#define OCD_CCTRL_CACHED		1
+#define OCD_CCTRL_UNCACHED		2
+
+/* Constants for RWCS:SZ */
+#define OCD_SZ_BYTE			0
+#define OCD_SZ_HALFWORD			1
+#define OCD_SZ_WORD			2
+
+/* Constants for WT:PTS */
+#define OCD_PTS_DISABLED		0
+#define OCD_PTS_PROGRAM_0B		1
+#define OCD_PTS_PROGRAM_1A		2
+#define OCD_PTS_PROGRAM_1B		3
+#define OCD_PTS_PROGRAM_2A		4
+#define OCD_PTS_PROGRAM_2B		5
+#define OCD_PTS_DATA_3A			6
+#define OCD_PTS_DATA_3B			7
+
+/* Constants for DTC:RWT1 */
+#define OCD_RWT1_NO_TRACE		0
+#define OCD_RWT1_DATA_READ		1
+#define OCD_RWT1_DATA_WRITE		2
+#define OCD_RWT1_DATA_READ_WRITE	3
+
+/* Constants for DTC:RWT0 */
+#define OCD_RWT0_NO_TRACE		0
+#define OCD_RWT0_DATA_READ		1
+#define OCD_RWT0_DATA_WRITE		2
+#define OCD_RWT0_DATA_READ_WRITE	3
+
+/* Constants for BWC0A:BWE */
+#define OCD_BWE_DISABLED		0
+#define OCD_BWE_BREAKPOINT_ENABLED	1
+#define OCD_BWE_WATCHPOINT_ENABLED	3
+
+/* Constants for BWC0B:BWE */
+#define OCD_BWE_DISABLED		0
+#define OCD_BWE_BREAKPOINT_ENABLED	1
+#define OCD_BWE_WATCHPOINT_ENABLED	3
+
+/* Constants for BWC1A:BWE */
+#define OCD_BWE_DISABLED		0
+#define OCD_BWE_BREAKPOINT_ENABLED	1
+#define OCD_BWE_WATCHPOINT_ENABLED	3
+
+/* Constants for BWC1B:BWE */
+#define OCD_BWE_DISABLED		0
+#define OCD_BWE_BREAKPOINT_ENABLED	1
+#define OCD_BWE_WATCHPOINT_ENABLED	3
+
+/* Constants for BWC2A:BWE */
+#define OCD_BWE_DISABLED		0
+#define OCD_BWE_BREAKPOINT_ENABLED	1
+#define OCD_BWE_WATCHPOINT_ENABLED	3
+
+/* Constants for BWC2B:BWE */
+#define OCD_BWE_DISABLED		0
+#define OCD_BWE_BREAKPOINT_ENABLED	1
+#define OCD_BWE_WATCHPOINT_ENABLED	3
+
+/* Constants for BWC3A:SIZE */
+#define OCD_SIZE_BYTE_ACCESS		4
+#define OCD_SIZE_HALFWORD_ACCESS	5
+#define OCD_SIZE_WORD_ACCESS		6
+#define OCD_SIZE_DOUBLE_WORD_ACCESS	7
+
+/* Constants for BWC3A:BRW */
+#define OCD_BRW_READ_BREAK		0
+#define OCD_BRW_WRITE_BREAK		1
+#define OCD_BRW_ANY_ACCES_BREAK		2
+
+/* Constants for BWC3A:BWE */
+#define OCD_BWE_DISABLED		0
+#define OCD_BWE_BREAKPOINT_ENABLED	1
+#define OCD_BWE_WATCHPOINT_ENABLED	3
+
+/* Constants for BWC3B:SIZE */
+#define OCD_SIZE_BYTE_ACCESS		4
+#define OCD_SIZE_HALFWORD_ACCESS	5
+#define OCD_SIZE_WORD_ACCESS		6
+#define OCD_SIZE_DOUBLE_WORD_ACCESS	7
+
+/* Constants for BWC3B:BRW */
+#define OCD_BRW_READ_BREAK		0
+#define OCD_BRW_WRITE_BREAK		1
+#define OCD_BRW_ANY_ACCES_BREAK		2
+
+/* Constants for BWC3B:BWE */
+#define OCD_BWE_DISABLED		0
+#define OCD_BWE_BREAKPOINT_ENABLED	1
+#define OCD_BWE_WATCHPOINT_ENABLED	3
+
+/* Constants for EPC0:RNG */
+#define OCD_RNG_DISABLED		0
+#define OCD_RNG_EXCLUSIVE		1
+#define OCD_RNG_INCLUSIVE		2
+
+/* Constants for EPC1:RNG */
+#define OCD_RNG_DISABLED		0
+#define OCD_RNG_EXCLUSIVE		1
+#define OCD_RNG_INCLUSIVE		2
+
+/* Constants for EPC2:RNG */
+#define OCD_RNG_DISABLED		0
+#define OCD_RNG_EXCLUSIVE		1
+#define OCD_RNG_INCLUSIVE		2
+
+/* Constants for EPC2:DB */
+#define OCD_DB_DISABLED			0
+#define OCD_DB_CHAINED_B		1
+#define OCD_DB_CHAINED_A		2
+#define OCD_DB_AHAINED_A_AND_B		3
+
+/* Constants for EPC3:RNG */
+#define OCD_RNG_DISABLED		0
+#define OCD_RNG_EXCLUSIVE		1
+#define OCD_RNG_INCLUSIVE		2
+
+#ifndef __ASSEMBLER__
+
+/* Register access macros */
+static inline unsigned long __ocd_read(unsigned int reg)
+{
+	return __builtin_mfdr(reg);
+}
+
+static inline void __ocd_write(unsigned int reg, unsigned long value)
+{
+	__builtin_mtdr(reg, value);
+}
+
+#define ocd_read(reg)			__ocd_read(OCD_##reg)
+#define ocd_write(reg, value)		__ocd_write(OCD_##reg, value)
+
+struct task_struct;
+
+void ocd_enable(struct task_struct *child);
+void ocd_disable(struct task_struct *child);
+
+#endif /* !__ASSEMBLER__ */
+
+#endif /* __ASM_AVR32_OCD_H */
diff --git a/arch/avr32/include/asm/page.h b/arch/avr32/include/asm/page.h
new file mode 100644
index 000000000000..f805d1cb11bc
--- /dev/null
+++ b/arch/avr32/include/asm/page.h
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_PAGE_H
+#define __ASM_AVR32_PAGE_H
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT	12
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+#define PTE_MASK	PAGE_MASK
+
+#ifndef __ASSEMBLY__
+
+#include <asm/addrspace.h>
+
+extern void clear_page(void *to);
+extern void copy_page(void *to, void *from);
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x)		((x).pte)
+#define pgd_val(x)		((x).pgd)
+#define pgprot_val(x)		((x).pgprot)
+
+#define __pte(x)		((pte_t) { (x) })
+#define __pgd(x)		((pgd_t) { (x) })
+#define __pgprot(x)		((pgprot_t) { (x) })
+
+/* FIXME: These should be removed soon */
+extern unsigned long memory_start, memory_end;
+
+/* Pure 2^n version of get_order */
+static inline int get_order(unsigned long size)
+{
+	unsigned lz;
+
+	size = (size - 1) >> PAGE_SHIFT;
+	asm("clz %0, %1" : "=r"(lz) : "r"(size));
+	return 32 - lz;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * The hardware maps the virtual addresses 0x80000000 -> 0x9fffffff
+ * permanently to the physical addresses 0x00000000 -> 0x1fffffff when
+ * segmentation is enabled. We want to make use of this in order to
+ * minimize TLB pressure.
+ */
+#define PAGE_OFFSET		(0x80000000UL)
+
+/*
+ * ALSA uses virt_to_page() on DMA pages, which I'm not entirely sure
+ * is a good idea. Anyway, we can't simply subtract PAGE_OFFSET here
+ * in that case, so we'll have to mask out the three most significant
+ * bits of the address instead...
+ *
+ * What's the difference between __pa() and virt_to_phys() anyway?
+ */
+#define __pa(x)		PHYSADDR(x)
+#define __va(x)		((void *)(P1SEGADDR(x)))
+
+#define MAP_NR(addr)	(((unsigned long)(addr) - PAGE_OFFSET) >> PAGE_SHIFT)
+
+#define phys_to_page(phys)	(pfn_to_page(phys >> PAGE_SHIFT))
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+#ifndef CONFIG_NEED_MULTIPLE_NODES
+
+#define PHYS_PFN_OFFSET		(CONFIG_PHYS_OFFSET >> PAGE_SHIFT)
+
+#define pfn_to_page(pfn)	(mem_map + ((pfn) - PHYS_PFN_OFFSET))
+#define page_to_pfn(page)	((unsigned long)((page) - mem_map) + PHYS_PFN_OFFSET)
+#define pfn_valid(pfn)		((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr))
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE |	\
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+/*
+ * Memory above this physical address will be considered highmem.
+ */
+#define HIGHMEM_START		0x20000000UL
+
+#endif /* __ASM_AVR32_PAGE_H */
diff --git a/arch/avr32/include/asm/param.h b/arch/avr32/include/asm/param.h
new file mode 100644
index 000000000000..34bc8d4c3b29
--- /dev/null
+++ b/arch/avr32/include/asm/param.h
@@ -0,0 +1,23 @@
+#ifndef __ASM_AVR32_PARAM_H
+#define __ASM_AVR32_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ
+# define USER_HZ	100		/* User interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
+#endif
+
+#ifndef HZ
+# define HZ		100
+#endif
+
+/* TODO: Should be configurable */
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+# define NOGROUP	(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64
+
+#endif /* __ASM_AVR32_PARAM_H */
diff --git a/arch/avr32/include/asm/pci.h b/arch/avr32/include/asm/pci.h
new file mode 100644
index 000000000000..a32a02372017
--- /dev/null
+++ b/arch/avr32/include/asm/pci.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_AVR32_PCI_H__
+#define __ASM_AVR32_PCI_H__
+
+/* We don't support PCI yet, but some drivers require this file anyway */
+
+#define PCI_DMA_BUS_IS_PHYS	(1)
+
+#include <asm-generic/pci-dma-compat.h>
+
+#endif /* __ASM_AVR32_PCI_H__ */
diff --git a/arch/avr32/include/asm/percpu.h b/arch/avr32/include/asm/percpu.h
new file mode 100644
index 000000000000..69227b4cd0d4
--- /dev/null
+++ b/arch/avr32/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_PERCPU_H
+#define __ASM_AVR32_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ASM_AVR32_PERCPU_H */
diff --git a/arch/avr32/include/asm/pgalloc.h b/arch/avr32/include/asm/pgalloc.h
new file mode 100644
index 000000000000..640821323943
--- /dev/null
+++ b/arch/avr32/include/asm/pgalloc.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_PGALLOC_H
+#define __ASM_AVR32_PGALLOC_H
+
+#include <linux/quicklist.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+#define QUICK_PGD	0	/* Preserve kernel mappings over free */
+#define QUICK_PT	1	/* Zero on free */
+
+static inline void pmd_populate_kernel(struct mm_struct *mm,
+				       pmd_t *pmd, pte_t *pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)pte));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+				    pgtable_t pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline void pgd_ctor(void *x)
+{
+	pgd_t *pgd = x;
+
+	memcpy(pgd + USER_PTRS_PER_PGD,
+		swapper_pg_dir + USER_PTRS_PER_PGD,
+		(PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+}
+
+/*
+ * Allocate and free page tables
+ */
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor);
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	quicklist_free(QUICK_PGD, NULL, pgd);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+					  unsigned long address)
+{
+	return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+					 unsigned long address)
+{
+	struct page *page;
+	void *pg;
+
+	pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
+	if (!pg)
+		return NULL;
+
+	page = virt_to_page(pg);
+	pgtable_page_ctor(page);
+
+	return page;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	quicklist_free(QUICK_PT, NULL, pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	quicklist_free_page(QUICK_PT, NULL, pte);
+}
+
+#define __pte_free_tlb(tlb,pte)				\
+do {							\
+	pgtable_page_dtor(pte);				\
+	tlb_remove_page((tlb), pte);			\
+} while (0)
+
+static inline void check_pgt_cache(void)
+{
+	quicklist_trim(QUICK_PGD, NULL, 25, 16);
+	quicklist_trim(QUICK_PT, NULL, 25, 16);
+}
+
+#endif /* __ASM_AVR32_PGALLOC_H */
diff --git a/arch/avr32/include/asm/pgtable-2level.h b/arch/avr32/include/asm/pgtable-2level.h
new file mode 100644
index 000000000000..425dd567b5b9
--- /dev/null
+++ b/arch/avr32/include/asm/pgtable-2level.h
@@ -0,0 +1,47 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_PGTABLE_2LEVEL_H
+#define __ASM_AVR32_PGTABLE_2LEVEL_H
+
+#include <asm-generic/pgtable-nopmd.h>
+
+/*
+ * Traditional 2-level paging structure
+ */
+#define PGDIR_SHIFT	22
+#define PTRS_PER_PGD	1024
+
+#define PTRS_PER_PTE	1024
+
+#ifndef __ASSEMBLY__
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep, pteval)
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+#define pte_pfn(x)		((unsigned long)(((x).pte >> PAGE_SHIFT)))
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_AVR32_PGTABLE_2LEVEL_H */
diff --git a/arch/avr32/include/asm/pgtable.h b/arch/avr32/include/asm/pgtable.h
new file mode 100644
index 000000000000..fecdda16f444
--- /dev/null
+++ b/arch/avr32/include/asm/pgtable.h
@@ -0,0 +1,377 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_PGTABLE_H
+#define __ASM_AVR32_PGTABLE_H
+
+#include <asm/addrspace.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/sched.h>
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Use two-level page tables just as the i386 (without PAE)
+ */
+#include <asm/pgtable-2level.h>
+
+/*
+ * The following code might need some cleanup when the values are
+ * final...
+ */
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS	0
+
+#ifndef __ASSEMBLY__
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern void paging_init(void);
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used for
+ * zero-mapped memory areas etc.
+ */
+extern struct page *empty_zero_page;
+#define ZERO_PAGE(vaddr) (empty_zero_page)
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8 MiB value just means that there will be a 8 MiB "hole"
+ * after the uncached physical memory (P2 segment) until the vmalloc
+ * area starts. That means that any out-of-bounds memory accesses will
+ * hopefully be caught; we don't know if the end of the P1/P2 segments
+ * are actually used for anything, but it is anyway safer to let the
+ * MMU catch these kinds of errors than to rely on the memory bus.
+ *
+ * A "hole" of the same size is added to the end of the P3 segment as
+ * well. It might seem wasteful to use 16 MiB of virtual address space
+ * on this, but we do have 512 MiB of it...
+ *
+ * The vmalloc() routines leave a hole of 4 KiB between each vmalloced
+ * area for the same reason.
+ */
+#define VMALLOC_OFFSET	(8 * 1024 * 1024)
+#define VMALLOC_START	(P3SEG + VMALLOC_OFFSET)
+#define VMALLOC_END	(P4SEG - VMALLOC_OFFSET)
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Page flags. Some of these flags are not directly supported by
+ * hardware, so we have to emulate them.
+ */
+#define _TLBEHI_BIT_VALID	9
+#define _TLBEHI_VALID		(1 << _TLBEHI_BIT_VALID)
+
+#define _PAGE_BIT_WT		0  /* W-bit   : write-through */
+#define _PAGE_BIT_DIRTY		1  /* D-bit   : page changed */
+#define _PAGE_BIT_SZ0		2  /* SZ0-bit : Size of page */
+#define _PAGE_BIT_SZ1		3  /* SZ1-bit : Size of page */
+#define _PAGE_BIT_EXECUTE	4  /* X-bit   : execute access allowed */
+#define _PAGE_BIT_RW		5  /* AP0-bit : write access allowed */
+#define _PAGE_BIT_USER		6  /* AP1-bit : user space access allowed */
+#define _PAGE_BIT_BUFFER	7  /* B-bit   : bufferable */
+#define _PAGE_BIT_GLOBAL	8  /* G-bit   : global (ignore ASID) */
+#define _PAGE_BIT_CACHABLE	9  /* C-bit   : cachable */
+
+/* If we drop support for 1K pages, we get two extra bits */
+#define _PAGE_BIT_PRESENT	10
+#define _PAGE_BIT_ACCESSED	11 /* software: page was accessed */
+
+/* The following flags are only valid when !PRESENT */
+#define _PAGE_BIT_FILE		0 /* software: pagecache or swap? */
+
+#define _PAGE_WT		(1 << _PAGE_BIT_WT)
+#define _PAGE_DIRTY		(1 << _PAGE_BIT_DIRTY)
+#define _PAGE_EXECUTE		(1 << _PAGE_BIT_EXECUTE)
+#define _PAGE_RW		(1 << _PAGE_BIT_RW)
+#define _PAGE_USER		(1 << _PAGE_BIT_USER)
+#define _PAGE_BUFFER		(1 << _PAGE_BIT_BUFFER)
+#define _PAGE_GLOBAL		(1 << _PAGE_BIT_GLOBAL)
+#define _PAGE_CACHABLE		(1 << _PAGE_BIT_CACHABLE)
+
+/* Software flags */
+#define _PAGE_ACCESSED		(1 << _PAGE_BIT_ACCESSED)
+#define _PAGE_PRESENT		(1 << _PAGE_BIT_PRESENT)
+#define _PAGE_FILE		(1 << _PAGE_BIT_FILE)
+
+/*
+ * Page types, i.e. sizes. _PAGE_TYPE_NONE corresponds to what is
+ * usually called _PAGE_PROTNONE on other architectures.
+ *
+ * XXX: Find out if _PAGE_PROTNONE is equivalent with !_PAGE_USER. If
+ * so, we can encode all possible page sizes (although we can't really
+ * support 1K pages anyway due to the _PAGE_PRESENT and _PAGE_ACCESSED
+ * bits)
+ *
+ */
+#define _PAGE_TYPE_MASK		((1 << _PAGE_BIT_SZ0) | (1 << _PAGE_BIT_SZ1))
+#define _PAGE_TYPE_NONE		(0 << _PAGE_BIT_SZ0)
+#define _PAGE_TYPE_SMALL	(1 << _PAGE_BIT_SZ0)
+#define _PAGE_TYPE_MEDIUM	(2 << _PAGE_BIT_SZ0)
+#define _PAGE_TYPE_LARGE	(3 << _PAGE_BIT_SZ0)
+
+/*
+ * Mask which drop software flags. We currently can't handle more than
+ * 512 MiB of physical memory, so we can use bits 29-31 for other
+ * stuff.  With a fixed 4K page size, we can use bits 10-11 as well as
+ * bits 2-3 (SZ)
+ */
+#define _PAGE_FLAGS_HARDWARE_MASK	0xfffff3ff
+
+#define _PAGE_FLAGS_CACHE_MASK	(_PAGE_CACHABLE | _PAGE_BUFFER | _PAGE_WT)
+
+/* Flags that may be modified by software */
+#define _PAGE_CHG_MASK		(PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY \
+				 | _PAGE_FLAGS_CACHE_MASK)
+
+#define _PAGE_FLAGS_READ	(_PAGE_CACHABLE	| _PAGE_BUFFER)
+#define _PAGE_FLAGS_WRITE	(_PAGE_FLAGS_READ | _PAGE_RW | _PAGE_DIRTY)
+
+#define _PAGE_NORMAL(x)	__pgprot((x) | _PAGE_PRESENT | _PAGE_TYPE_SMALL	\
+				 | _PAGE_ACCESSED)
+
+#define PAGE_NONE	(_PAGE_ACCESSED | _PAGE_TYPE_NONE)
+#define PAGE_READ	(_PAGE_FLAGS_READ | _PAGE_USER)
+#define PAGE_EXEC	(_PAGE_FLAGS_READ | _PAGE_EXECUTE | _PAGE_USER)
+#define PAGE_WRITE	(_PAGE_FLAGS_WRITE | _PAGE_USER)
+#define PAGE_KERNEL	_PAGE_NORMAL(_PAGE_FLAGS_WRITE | _PAGE_EXECUTE | _PAGE_GLOBAL)
+#define PAGE_KERNEL_RO	_PAGE_NORMAL(_PAGE_FLAGS_READ | _PAGE_EXECUTE | _PAGE_GLOBAL)
+
+#define _PAGE_P(x)	_PAGE_NORMAL((x) & ~(_PAGE_RW | _PAGE_DIRTY))
+#define _PAGE_S(x)	_PAGE_NORMAL(x)
+
+#define PAGE_COPY	_PAGE_P(PAGE_WRITE | PAGE_READ)
+#define PAGE_SHARED	_PAGE_S(PAGE_WRITE | PAGE_READ)
+
+#ifndef __ASSEMBLY__
+/*
+ * The hardware supports flags for write- and execute access. Read is
+ * always allowed if the page is loaded into the TLB, so the "-w-",
+ * "--x" and "-wx" mappings are implemented as "rw-", "r-x" and "rwx",
+ * respectively.
+ *
+ * The "---" case is handled by software; the page will simply not be
+ * loaded into the TLB if the page type is _PAGE_TYPE_NONE.
+ */
+
+#define __P000	__pgprot(PAGE_NONE)
+#define __P001	_PAGE_P(PAGE_READ)
+#define __P010	_PAGE_P(PAGE_WRITE)
+#define __P011	_PAGE_P(PAGE_WRITE | PAGE_READ)
+#define __P100	_PAGE_P(PAGE_EXEC)
+#define __P101	_PAGE_P(PAGE_EXEC | PAGE_READ)
+#define __P110	_PAGE_P(PAGE_EXEC | PAGE_WRITE)
+#define __P111	_PAGE_P(PAGE_EXEC | PAGE_WRITE | PAGE_READ)
+
+#define __S000	__pgprot(PAGE_NONE)
+#define __S001	_PAGE_S(PAGE_READ)
+#define __S010	_PAGE_S(PAGE_WRITE)
+#define __S011	_PAGE_S(PAGE_WRITE | PAGE_READ)
+#define __S100	_PAGE_S(PAGE_EXEC)
+#define __S101	_PAGE_S(PAGE_EXEC | PAGE_READ)
+#define __S110	_PAGE_S(PAGE_EXEC | PAGE_WRITE)
+#define __S111	_PAGE_S(PAGE_EXEC | PAGE_WRITE | PAGE_READ)
+
+#define pte_none(x)	(!pte_val(x))
+#define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
+
+#define pte_clear(mm,addr,xp)					\
+	do {							\
+		set_pte_at(mm, addr, xp, __pte(0));		\
+	} while (0)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_write(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_RW;
+}
+static inline int pte_dirty(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_DIRTY;
+}
+static inline int pte_young(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_ACCESSED;
+}
+static inline int pte_special(pte_t pte)
+{
+	return 0;
+}
+
+/*
+ * The following only work if pte_present() is not true.
+ */
+static inline int pte_file(pte_t pte)
+{
+	return pte_val(pte) & _PAGE_FILE;
+}
+
+/* Mutator functions for PTE bits */
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_RW));
+	return pte;
+}
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY));
+	return pte;
+}
+static inline pte_t pte_mkold(pte_t pte)
+{
+	set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED));
+	return pte;
+}
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	set_pte(&pte, __pte(pte_val(pte) | _PAGE_RW));
+	return pte;
+}
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY));
+	return pte;
+}
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED));
+	return pte;
+}
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return pte;
+}
+
+#define pmd_none(x)	(!pmd_val(x))
+#define pmd_present(x)	(pmd_val(x))
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+	set_pmd(pmdp, __pmd(0));
+}
+
+#define	pmd_bad(x)	(pmd_val(x) & ~PAGE_MASK)
+
+/*
+ * Permanent address of a page. We don't support highmem, so this is
+ * trivial.
+ */
+#define pages_to_mb(x)	((x) >> (20-PAGE_SHIFT))
+#define pte_page(x)	(pfn_to_page(pte_pfn(x)))
+
+/*
+ * Mark the prot value as uncacheable and unbufferable
+ */
+#define pgprot_noncached(prot)						\
+	__pgprot(pgprot_val(prot) & ~(_PAGE_BUFFER | _PAGE_CACHABLE))
+
+/*
+ * Mark the prot value as uncacheable but bufferable
+ */
+#define pgprot_writecombine(prot)					\
+	__pgprot((pgprot_val(prot) & ~_PAGE_CACHABLE) | _PAGE_BUFFER)
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
+ */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK)
+			    | pgprot_val(newprot)));
+	return pte;
+}
+
+#define page_pte(page)	page_pte_prot(page, __pgprot(0))
+
+#define pmd_page_vaddr(pmd)	pmd_val(pmd)
+#define pmd_page(pmd)		(virt_to_page(pmd_val(pmd)))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT)	\
+				 & (PTRS_PER_PGD - 1))
+#define pgd_offset(mm, address)	((mm)->pgd + pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address)				\
+	((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset(dir, address)					\
+	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
+#define pte_offset_kernel(dir, address)					\
+	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
+#define pte_offset_map(dir, address) pte_offset_kernel(dir, address)
+#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address)
+#define pte_unmap(pte)		do { } while (0)
+#define pte_unmap_nested(pte)	do { } while (0)
+
+struct vm_area_struct;
+extern void update_mmu_cache(struct vm_area_struct * vma,
+			     unsigned long address, pte_t pte);
+
+/*
+ * Encode and decode a swap entry
+ *
+ * Constraints:
+ *   _PAGE_FILE at bit 0
+ *   _PAGE_TYPE_* at bits 2-3 (for emulating _PAGE_PROTNONE)
+ *   _PAGE_PRESENT at bit 10
+ *
+ * We encode the type into bits 4-9 and offset into bits 11-31. This
+ * gives us a 21 bits offset, or 2**21 * 4K = 8G usable swap space per
+ * device, and 64 possible types.
+ *
+ * NOTE: We should set ZEROs at the position of _PAGE_PRESENT
+ *       and _PAGE_PROTNONE bits
+ */
+#define __swp_type(x)		(((x).val >> 4) & 0x3f)
+#define __swp_offset(x)		((x).val >> 11)
+#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 4) | ((offset) << 11) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+/*
+ * Encode and decode a nonlinear file mapping entry. We have to
+ * preserve _PAGE_FILE and _PAGE_PRESENT here. _PAGE_TYPE_* isn't
+ * necessary, since _PAGE_FILE implies !_PAGE_PROTNONE (?)
+ */
+#define PTE_FILE_MAX_BITS	30
+#define pte_to_pgoff(pte)	(((pte_val(pte) >> 1) & 0x1ff)		\
+				 | ((pte_val(pte) >> 11) << 9))
+#define pgoff_to_pte(off)	((pte_t) { ((((off) & 0x1ff) << 1)	\
+					    | (((off) >> 9) << 11)	\
+					    | _PAGE_FILE) })
+
+typedef pte_t *pte_addr_t;
+
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)	\
+	remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+/* No page table caches to initialize (?) */
+#define pgtable_cache_init()	do { } while(0)
+
+#include <asm-generic/pgtable.h>
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __ASM_AVR32_PGTABLE_H */
diff --git a/arch/avr32/include/asm/poll.h b/arch/avr32/include/asm/poll.h
new file mode 100644
index 000000000000..c98509d3149e
--- /dev/null
+++ b/arch/avr32/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/avr32/include/asm/posix_types.h b/arch/avr32/include/asm/posix_types.h
new file mode 100644
index 000000000000..fe0c0c014389
--- /dev/null
+++ b/arch/avr32/include/asm/posix_types.h
@@ -0,0 +1,125 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_POSIX_TYPES_H
+#define __ASM_AVR32_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long   __kernel_ino_t;
+typedef unsigned short  __kernel_mode_t;
+typedef unsigned short  __kernel_nlink_t;
+typedef long            __kernel_off_t;
+typedef int             __kernel_pid_t;
+typedef unsigned short  __kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef int             __kernel_ptrdiff_t;
+typedef long            __kernel_time_t;
+typedef long            __kernel_suseconds_t;
+typedef long            __kernel_clock_t;
+typedef int             __kernel_timer_t;
+typedef int             __kernel_clockid_t;
+typedef int             __kernel_daddr_t;
+typedef char *          __kernel_caddr_t;
+typedef unsigned short  __kernel_uid16_t;
+typedef unsigned short  __kernel_gid16_t;
+typedef unsigned int    __kernel_uid32_t;
+typedef unsigned int    __kernel_gid32_t;
+
+typedef unsigned short  __kernel_old_uid_t;
+typedef unsigned short  __kernel_old_gid_t;
+typedef unsigned short  __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long       __kernel_loff_t;
+#endif
+
+typedef struct {
+    int     val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef  __FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+    unsigned long __tmp = __fd / __NFDBITS;
+    unsigned long __rem = __fd % __NFDBITS;
+    __fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef  __FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+    unsigned long __tmp = __fd / __NFDBITS;
+    unsigned long __rem = __fd % __NFDBITS;
+    __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef  __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+    unsigned long __tmp = __fd / __NFDBITS;
+    unsigned long __rem = __fd % __NFDBITS;
+    return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef  __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+    unsigned long *__tmp = __p->fds_bits;
+    int __i;
+
+    if (__builtin_constant_p(__FDSET_LONGS)) {
+        switch (__FDSET_LONGS) {
+            case 16:
+                __tmp[ 0] = 0; __tmp[ 1] = 0;
+                __tmp[ 2] = 0; __tmp[ 3] = 0;
+                __tmp[ 4] = 0; __tmp[ 5] = 0;
+                __tmp[ 6] = 0; __tmp[ 7] = 0;
+                __tmp[ 8] = 0; __tmp[ 9] = 0;
+                __tmp[10] = 0; __tmp[11] = 0;
+                __tmp[12] = 0; __tmp[13] = 0;
+                __tmp[14] = 0; __tmp[15] = 0;
+                return;
+
+            case 8:
+                __tmp[ 0] = 0; __tmp[ 1] = 0;
+                __tmp[ 2] = 0; __tmp[ 3] = 0;
+                __tmp[ 4] = 0; __tmp[ 5] = 0;
+                __tmp[ 6] = 0; __tmp[ 7] = 0;
+                return;
+
+            case 4:
+                __tmp[ 0] = 0; __tmp[ 1] = 0;
+                __tmp[ 2] = 0; __tmp[ 3] = 0;
+                return;
+        }
+    }
+    __i = __FDSET_LONGS;
+    while (__i) {
+        __i--;
+        *__tmp = 0;
+        __tmp++;
+    }
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* __ASM_AVR32_POSIX_TYPES_H */
diff --git a/arch/avr32/include/asm/processor.h b/arch/avr32/include/asm/processor.h
new file mode 100644
index 000000000000..49a88f5a9d2f
--- /dev/null
+++ b/arch/avr32/include/asm/processor.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_PROCESSOR_H
+#define __ASM_AVR32_PROCESSOR_H
+
+#include <asm/page.h>
+#include <asm/cache.h>
+
+#define TASK_SIZE	0x80000000
+
+#ifdef __KERNEL__
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+#endif
+
+#ifndef __ASSEMBLY__
+
+static inline void *current_text_addr(void)
+{
+	register void *pc asm("pc");
+	return pc;
+}
+
+enum arch_type {
+	ARCH_AVR32A,
+	ARCH_AVR32B,
+	ARCH_MAX
+};
+
+enum cpu_type {
+	CPU_MORGAN,
+	CPU_AT32AP,
+	CPU_MAX
+};
+
+enum tlb_config {
+	TLB_NONE,
+	TLB_SPLIT,
+	TLB_UNIFIED,
+	TLB_INVALID
+};
+
+#define AVR32_FEATURE_RMW	(1 << 0)
+#define AVR32_FEATURE_DSP	(1 << 1)
+#define AVR32_FEATURE_SIMD	(1 << 2)
+#define AVR32_FEATURE_OCD	(1 << 3)
+#define AVR32_FEATURE_PCTR	(1 << 4)
+#define AVR32_FEATURE_JAVA	(1 << 5)
+#define AVR32_FEATURE_FPU	(1 << 6)
+
+struct avr32_cpuinfo {
+	struct clk *clk;
+	unsigned long loops_per_jiffy;
+	enum arch_type arch_type;
+	enum cpu_type cpu_type;
+	unsigned short arch_revision;
+	unsigned short cpu_revision;
+	enum tlb_config tlb_config;
+	unsigned long features;
+	u32 device_id;
+
+	struct cache_info icache;
+	struct cache_info dcache;
+};
+
+static inline unsigned int avr32_get_manufacturer_id(struct avr32_cpuinfo *cpu)
+{
+	return (cpu->device_id >> 1) & 0x7f;
+}
+static inline unsigned int avr32_get_product_number(struct avr32_cpuinfo *cpu)
+{
+	return (cpu->device_id >> 12) & 0xffff;
+}
+static inline unsigned int avr32_get_chip_revision(struct avr32_cpuinfo *cpu)
+{
+	return (cpu->device_id >> 28) & 0x0f;
+}
+
+extern struct avr32_cpuinfo boot_cpu_data;
+
+#ifdef CONFIG_SMP
+extern struct avr32_cpuinfo cpu_data[];
+#define current_cpu_data cpu_data[smp_processor_id()]
+#else
+#define cpu_data (&boot_cpu_data)
+#define current_cpu_data boot_cpu_data
+#endif
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's
+ */
+#define TASK_UNMAPPED_BASE	(PAGE_ALIGN(TASK_SIZE / 3))
+
+#define cpu_relax()		barrier()
+#define cpu_sync_pipeline()	asm volatile("sub pc, -2" : : : "memory")
+
+struct cpu_context {
+	unsigned long sr;
+	unsigned long pc;
+	unsigned long ksp;	/* Kernel stack pointer */
+	unsigned long r7;
+	unsigned long r6;
+	unsigned long r5;
+	unsigned long r4;
+	unsigned long r3;
+	unsigned long r2;
+	unsigned long r1;
+	unsigned long r0;
+};
+
+/* This struct contains the CPU context as stored by switch_to() */
+struct thread_struct {
+	struct cpu_context cpu_context;
+	unsigned long single_step_addr;
+	u16 single_step_insn;
+};
+
+#define INIT_THREAD {						\
+	.cpu_context = {					\
+		.ksp = sizeof(init_stack) + (long)&init_stack,	\
+	},							\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+#define start_thread(regs, new_pc, new_sp)	 \
+	do {					 \
+		set_fs(USER_DS);		 \
+		memset(regs, 0, sizeof(*regs));	 \
+		regs->sr = MODE_USER;		 \
+		regs->pc = new_pc & ~1;		 \
+		regs->sp = new_sp;		 \
+	} while(0)
+
+struct task_struct;
+
+/* Free all resources held by a thread */
+extern void release_thread(struct task_struct *);
+
+/* Create a kernel thread without removing it from tasklists */
+extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk) do { } while(0)
+
+/* Return saved PC of a blocked thread */
+#define thread_saved_pc(tsk)    ((tsk)->thread.cpu_context.pc)
+
+struct pt_regs;
+extern unsigned long get_wchan(struct task_struct *p);
+extern void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl);
+extern void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp,
+			       struct pt_regs *regs, const char *log_lvl);
+
+#define task_pt_regs(p) \
+	((struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1)
+
+#define KSTK_EIP(tsk)	((tsk)->thread.cpu_context.pc)
+#define KSTK_ESP(tsk)	((tsk)->thread.cpu_context.ksp)
+
+#define ARCH_HAS_PREFETCH
+
+static inline void prefetch(const void *x)
+{
+	const char *c = x;
+	asm volatile("pref %0" : : "r"(c));
+}
+#define PREFETCH_STRIDE	L1_CACHE_BYTES
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_AVR32_PROCESSOR_H */
diff --git a/arch/avr32/include/asm/ptrace.h b/arch/avr32/include/asm/ptrace.h
new file mode 100644
index 000000000000..9e2d44f4e0fe
--- /dev/null
+++ b/arch/avr32/include/asm/ptrace.h
@@ -0,0 +1,157 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_PTRACE_H
+#define __ASM_AVR32_PTRACE_H
+
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+
+/*
+ * Status Register bits
+ */
+#define SR_H		0x20000000
+#define SR_J		0x10000000
+#define SR_DM		0x08000000
+#define SR_D		0x04000000
+#define MODE_NMI	0x01c00000
+#define MODE_EXCEPTION	0x01800000
+#define MODE_INT3	0x01400000
+#define MODE_INT2	0x01000000
+#define MODE_INT1	0x00c00000
+#define MODE_INT0	0x00800000
+#define MODE_SUPERVISOR	0x00400000
+#define MODE_USER	0x00000000
+#define MODE_MASK	0x01c00000
+#define SR_EM		0x00200000
+#define SR_I3M		0x00100000
+#define SR_I2M		0x00080000
+#define SR_I1M		0x00040000
+#define SR_I0M		0x00020000
+#define SR_GM		0x00010000
+
+#define SR_H_BIT	29
+#define SR_J_BIT	28
+#define SR_DM_BIT	27
+#define SR_D_BIT	26
+#define MODE_SHIFT	22
+#define SR_EM_BIT	21
+#define SR_I3M_BIT	20
+#define SR_I2M_BIT	19
+#define SR_I1M_BIT	18
+#define SR_I0M_BIT	17
+#define SR_GM_BIT	16
+
+/* The user-visible part */
+#define SR_L		0x00000020
+#define SR_Q		0x00000010
+#define SR_V		0x00000008
+#define SR_N		0x00000004
+#define SR_Z		0x00000002
+#define SR_C		0x00000001
+
+#define SR_L_BIT	5
+#define SR_Q_BIT	4
+#define SR_V_BIT	3
+#define SR_N_BIT	2
+#define SR_Z_BIT	1
+#define SR_C_BIT	0
+
+/*
+ * The order is defined by the stmts instruction. r0 is stored first,
+ * so it gets the highest address.
+ *
+ * Registers 0-12 are general-purpose registers (r12 is normally used for
+ * the function return value).
+ * Register 13 is the stack pointer
+ * Register 14 is the link register
+ * Register 15 is the program counter (retrieved from the RAR sysreg)
+ */
+#define FRAME_SIZE_FULL 72
+#define REG_R12_ORIG	68
+#define REG_R0		64
+#define REG_R1		60
+#define REG_R2		56
+#define REG_R3		52
+#define REG_R4		48
+#define REG_R5		44
+#define REG_R6		40
+#define REG_R7		36
+#define REG_R8		32
+#define REG_R9		28
+#define REG_R10		24
+#define REG_R11		20
+#define REG_R12		16
+#define REG_SP		12
+#define REG_LR		 8
+
+#define FRAME_SIZE_MIN	 8
+#define REG_PC		 4
+#define REG_SR		 0
+
+#ifndef __ASSEMBLY__
+struct pt_regs {
+	/* These are always saved */
+	unsigned long sr;
+	unsigned long pc;
+
+	/* These are sometimes saved */
+	unsigned long lr;
+	unsigned long sp;
+	unsigned long r12;
+	unsigned long r11;
+	unsigned long r10;
+	unsigned long r9;
+	unsigned long r8;
+	unsigned long r7;
+	unsigned long r6;
+	unsigned long r5;
+	unsigned long r4;
+	unsigned long r3;
+	unsigned long r2;
+	unsigned long r1;
+	unsigned long r0;
+
+	/* Only saved on system call */
+	unsigned long r12_orig;
+};
+
+#ifdef __KERNEL__
+
+#include <asm/ocd.h>
+
+#define arch_ptrace_attach(child)       ocd_enable(child)
+
+#define user_mode(regs)                 (((regs)->sr & MODE_MASK) == MODE_USER)
+#define instruction_pointer(regs)       ((regs)->pc)
+#define profile_pc(regs)                instruction_pointer(regs)
+
+extern void show_regs (struct pt_regs *);
+
+static __inline__ int valid_user_regs(struct pt_regs *regs)
+{
+	/*
+	 * Some of the Java bits might be acceptable if/when we
+	 * implement some support for that stuff...
+	 */
+	if ((regs->sr & 0xffff0000) == 0)
+		return 1;
+
+	/*
+	 * Force status register flags to be sane and report this
+	 * illegal behaviour...
+	 */
+	regs->sr &= 0x0000ffff;
+	return 0;
+}
+
+
+#endif /* __KERNEL__ */
+
+#endif /* ! __ASSEMBLY__ */
+
+#endif /* __ASM_AVR32_PTRACE_H */
diff --git a/arch/avr32/include/asm/resource.h b/arch/avr32/include/asm/resource.h
new file mode 100644
index 000000000000..c6dd101472b1
--- /dev/null
+++ b/arch/avr32/include/asm/resource.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_RESOURCE_H
+#define __ASM_AVR32_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* __ASM_AVR32_RESOURCE_H */
diff --git a/arch/avr32/include/asm/scatterlist.h b/arch/avr32/include/asm/scatterlist.h
new file mode 100644
index 000000000000..377320e3bd17
--- /dev/null
+++ b/arch/avr32/include/asm/scatterlist.h
@@ -0,0 +1,26 @@
+#ifndef __ASM_AVR32_SCATTERLIST_H
+#define __ASM_AVR32_SCATTERLIST_H
+
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+   unsigned long	sg_magic;
+#endif
+    unsigned long	page_link;
+    unsigned int	offset;
+    dma_addr_t		dma_address;
+    unsigned int	length;
+};
+
+/* These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)		((sg)->length)
+
+#define ISA_DMA_THRESHOLD (0xffffffff)
+
+#endif /* __ASM_AVR32_SCATTERLIST_H */
diff --git a/arch/avr32/include/asm/sections.h b/arch/avr32/include/asm/sections.h
new file mode 100644
index 000000000000..aa14252e4181
--- /dev/null
+++ b/arch/avr32/include/asm/sections.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_SECTIONS_H
+#define __ASM_AVR32_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif /* __ASM_AVR32_SECTIONS_H */
diff --git a/arch/avr32/include/asm/sembuf.h b/arch/avr32/include/asm/sembuf.h
new file mode 100644
index 000000000000..e472216e0c97
--- /dev/null
+++ b/arch/avr32/include/asm/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_AVR32_SEMBUF_H
+#define __ASM_AVR32_SEMBUF_H
+
+/*
+* The semid64_ds structure for AVR32 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+        struct ipc64_perm sem_perm;             /* permissions .. see ipc.h */
+        __kernel_time_t sem_otime;              /* last semop time */
+        unsigned long   __unused1;
+        __kernel_time_t sem_ctime;              /* last change time */
+        unsigned long   __unused2;
+        unsigned long   sem_nsems;              /* no. of semaphores in array */
+        unsigned long   __unused3;
+        unsigned long   __unused4;
+};
+
+#endif /* __ASM_AVR32_SEMBUF_H */
diff --git a/arch/avr32/include/asm/serial.h b/arch/avr32/include/asm/serial.h
new file mode 100644
index 000000000000..5ecaebc22b02
--- /dev/null
+++ b/arch/avr32/include/asm/serial.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD (1843200 / 16)
+
+#endif /* _ASM_SERIAL_H */
diff --git a/arch/avr32/include/asm/setup.h b/arch/avr32/include/asm/setup.h
new file mode 100644
index 000000000000..ff5b7cf6be4d
--- /dev/null
+++ b/arch/avr32/include/asm/setup.h
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * Based on linux/include/asm-arm/setup.h
+ *   Copyright (C) 1997-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_SETUP_H__
+#define __ASM_AVR32_SETUP_H__
+
+#define COMMAND_LINE_SIZE 256
+
+#ifdef __KERNEL__
+
+/* Magic number indicating that a tag table is present */
+#define ATAG_MAGIC	0xa2a25441
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Generic memory range, used by several tags.
+ *
+ *   addr is always physical.
+ *   size is measured in bytes.
+ *   next is for use by the OS, e.g. for grouping regions into
+ *        linked lists.
+ */
+struct tag_mem_range {
+	u32			addr;
+	u32			size;
+	struct tag_mem_range *	next;
+};
+
+/* The list ends with an ATAG_NONE node. */
+#define ATAG_NONE	0x00000000
+
+struct tag_header {
+	u32 size;
+	u32 tag;
+};
+
+/* The list must start with an ATAG_CORE node */
+#define ATAG_CORE	0x54410001
+
+struct tag_core {
+	u32 flags;
+	u32 pagesize;
+	u32 rootdev;
+};
+
+/* it is allowed to have multiple ATAG_MEM nodes */
+#define ATAG_MEM	0x54410002
+/* ATAG_MEM uses tag_mem_range */
+
+/* command line: \0 terminated string */
+#define ATAG_CMDLINE	0x54410003
+
+struct tag_cmdline {
+	char	cmdline[1];	/* this is the minimum size */
+};
+
+/* Ramdisk image (may be compressed) */
+#define ATAG_RDIMG	0x54410004
+/* ATAG_RDIMG uses tag_mem_range */
+
+/* Information about various clocks present in the system */
+#define ATAG_CLOCK	0x54410005
+
+struct tag_clock {
+	u32	clock_id;	/* Which clock are we talking about? */
+	u32	clock_flags;	/* Special features */
+	u64	clock_hz;	/* Clock speed in Hz */
+};
+
+/* The clock types we know about */
+#define CLOCK_BOOTCPU	0
+
+/* Memory reserved for the system (e.g. the bootloader) */
+#define ATAG_RSVD_MEM	0x54410006
+/* ATAG_RSVD_MEM uses tag_mem_range */
+
+/* Ethernet information */
+
+#define ATAG_ETHERNET	0x54410007
+
+struct tag_ethernet {
+	u8	mac_index;
+	u8	mii_phy_addr;
+	u8	hw_address[6];
+};
+
+#define ETH_INVALID_PHY	0xff
+
+struct tag {
+	struct tag_header hdr;
+	union {
+		struct tag_core core;
+		struct tag_mem_range mem_range;
+		struct tag_cmdline cmdline;
+		struct tag_clock clock;
+		struct tag_ethernet ethernet;
+	} u;
+};
+
+struct tagtable {
+	u32	tag;
+	int	(*parse)(struct tag *);
+};
+
+#define __tag __used __attribute__((__section__(".taglist.init")))
+#define __tagtable(tag, fn)						\
+	static struct tagtable __tagtable_##fn __tag = { tag, fn }
+
+#define tag_member_present(tag,member)					\
+	((unsigned long)(&((struct tag *)0L)->member + 1)		\
+	 <= (tag)->hdr.size * 4)
+
+#define tag_next(t)	((struct tag *)((u32 *)(t) + (t)->hdr.size))
+#define tag_size(type)	((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
+
+#define for_each_tag(t,base)						\
+	for (t = base; t->hdr.size; t = tag_next(t))
+
+extern struct tag *bootloader_tags;
+
+extern resource_size_t fbmem_start;
+extern resource_size_t fbmem_size;
+
+void setup_processor(void);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif  /*  __KERNEL__  */
+
+#endif /* __ASM_AVR32_SETUP_H__ */
diff --git a/arch/avr32/include/asm/shmbuf.h b/arch/avr32/include/asm/shmbuf.h
new file mode 100644
index 000000000000..c62fba41739a
--- /dev/null
+++ b/arch/avr32/include/asm/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef __ASM_AVR32_SHMBUF_H
+#define __ASM_AVR32_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __ASM_AVR32_SHMBUF_H */
diff --git a/arch/avr32/include/asm/shmparam.h b/arch/avr32/include/asm/shmparam.h
new file mode 100644
index 000000000000..3681266c77f7
--- /dev/null
+++ b/arch/avr32/include/asm/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_SHMPARAM_H
+#define __ASM_AVR32_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE	/* attach addr a multiple of this */
+
+#endif /* __ASM_AVR32_SHMPARAM_H */
diff --git a/arch/avr32/include/asm/sigcontext.h b/arch/avr32/include/asm/sigcontext.h
new file mode 100644
index 000000000000..e04062b5f39f
--- /dev/null
+++ b/arch/avr32/include/asm/sigcontext.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_SIGCONTEXT_H
+#define __ASM_AVR32_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long	oldmask;
+
+	/* CPU registers */
+	unsigned long	sr;
+	unsigned long	pc;
+	unsigned long	lr;
+	unsigned long	sp;
+	unsigned long	r12;
+	unsigned long	r11;
+	unsigned long	r10;
+	unsigned long	r9;
+	unsigned long	r8;
+	unsigned long	r7;
+	unsigned long	r6;
+	unsigned long	r5;
+	unsigned long	r4;
+	unsigned long	r3;
+	unsigned long	r2;
+	unsigned long	r1;
+	unsigned long	r0;
+};
+
+#endif /* __ASM_AVR32_SIGCONTEXT_H */
diff --git a/arch/avr32/include/asm/siginfo.h b/arch/avr32/include/asm/siginfo.h
new file mode 100644
index 000000000000..5ee93f40a8a8
--- /dev/null
+++ b/arch/avr32/include/asm/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef _AVR32_SIGINFO_H
+#define _AVR32_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/arch/avr32/include/asm/signal.h b/arch/avr32/include/asm/signal.h
new file mode 100644
index 000000000000..caffefeeba1f
--- /dev/null
+++ b/arch/avr32/include/asm/signal.h
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_SIGNAL_H
+#define __ASM_AVR32_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	(_NSIG-1)
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_NOCLDSTOP		flag to turn off SIGCHLD when children stop.
+ * SA_NOCLDWAIT		flag on SIGCHLD to inhibit zombies.
+ * SA_SIGINFO		deliver the signal with SIGINFO structs
+ * SA_ONSTACK		indicates that a registered stack_t will be used.
+ * SA_RESTART		flag to get restarting signals (which were the default long ago)
+ * SA_NODEFER		prevents the current signal from being masked in the handler.
+ * SA_RESETHAND		clears the handler when the signal is delivered.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_RESTORER	0x04000000
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+		__sighandler_t _sa_handler;
+		void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/avr32/include/asm/socket.h b/arch/avr32/include/asm/socket.h
new file mode 100644
index 000000000000..35863f260929
--- /dev/null
+++ b/arch/avr32/include/asm/socket.h
@@ -0,0 +1,57 @@
+#ifndef __ASM_AVR32_SOCKET_H
+#define __ASM_AVR32_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#endif /* __ASM_AVR32_SOCKET_H */
diff --git a/arch/avr32/include/asm/sockios.h b/arch/avr32/include/asm/sockios.h
new file mode 100644
index 000000000000..0802d742f97d
--- /dev/null
+++ b/arch/avr32/include/asm/sockios.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_AVR32_SOCKIOS_H
+#define __ASM_AVR32_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* __ASM_AVR32_SOCKIOS_H */
diff --git a/arch/avr32/include/asm/stat.h b/arch/avr32/include/asm/stat.h
new file mode 100644
index 000000000000..e72881e10230
--- /dev/null
+++ b/arch/avr32/include/asm/stat.h
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_STAT_H
+#define __ASM_AVR32_STAT_H
+
+struct __old_kernel_stat {
+        unsigned short st_dev;
+        unsigned short st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned short st_rdev;
+        unsigned long  st_size;
+        unsigned long  st_atime;
+        unsigned long  st_mtime;
+        unsigned long  st_ctime;
+};
+
+struct stat {
+        unsigned long st_dev;
+        unsigned long st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned long  st_rdev;
+        unsigned long  st_size;
+        unsigned long  st_blksize;
+        unsigned long  st_blocks;
+        unsigned long  st_atime;
+        unsigned long  st_atime_nsec;
+        unsigned long  st_mtime;
+        unsigned long  st_mtime_nsec;
+        unsigned long  st_ctime;
+        unsigned long  st_ctime_nsec;
+        unsigned long  __unused4;
+        unsigned long  __unused5;
+};
+
+#define STAT_HAVE_NSEC 1
+
+struct stat64 {
+	unsigned long long st_dev;
+
+	unsigned long long st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long st_rdev;
+
+	long long	st_size;
+	unsigned long	__pad1;		/* align 64-bit st_blocks */
+	unsigned long	st_blksize;
+
+	unsigned long long st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* __ASM_AVR32_STAT_H */
diff --git a/arch/avr32/include/asm/statfs.h b/arch/avr32/include/asm/statfs.h
new file mode 100644
index 000000000000..2961bd18c50e
--- /dev/null
+++ b/arch/avr32/include/asm/statfs.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_STATFS_H
+#define __ASM_AVR32_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* __ASM_AVR32_STATFS_H */
diff --git a/arch/avr32/include/asm/string.h b/arch/avr32/include/asm/string.h
new file mode 100644
index 000000000000..c91a623cd585
--- /dev/null
+++ b/arch/avr32/include/asm/string.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_STRING_H
+#define __ASM_AVR32_STRING_H
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *b, int c, size_t len);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *to, const void *from, size_t len);
+
+#endif /* __ASM_AVR32_STRING_H */
diff --git a/arch/avr32/include/asm/sysreg.h b/arch/avr32/include/asm/sysreg.h
new file mode 100644
index 000000000000..d4e0950170ca
--- /dev/null
+++ b/arch/avr32/include/asm/sysreg.h
@@ -0,0 +1,291 @@
+/*
+ * AVR32 System Registers
+ *
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_SYSREG_H
+#define __ASM_AVR32_SYSREG_H
+
+/* sysreg register offsets */
+#define SYSREG_SR				0x0000
+#define SYSREG_EVBA				0x0004
+#define SYSREG_ACBA				0x0008
+#define SYSREG_CPUCR				0x000c
+#define SYSREG_ECR				0x0010
+#define SYSREG_RSR_SUP				0x0014
+#define SYSREG_RSR_INT0				0x0018
+#define SYSREG_RSR_INT1				0x001c
+#define SYSREG_RSR_INT2				0x0020
+#define SYSREG_RSR_INT3				0x0024
+#define SYSREG_RSR_EX				0x0028
+#define SYSREG_RSR_NMI				0x002c
+#define SYSREG_RSR_DBG				0x0030
+#define SYSREG_RAR_SUP				0x0034
+#define SYSREG_RAR_INT0				0x0038
+#define SYSREG_RAR_INT1				0x003c
+#define SYSREG_RAR_INT2				0x0040
+#define SYSREG_RAR_INT3				0x0044
+#define SYSREG_RAR_EX				0x0048
+#define SYSREG_RAR_NMI				0x004c
+#define SYSREG_RAR_DBG				0x0050
+#define SYSREG_JECR				0x0054
+#define SYSREG_JOSP				0x0058
+#define SYSREG_JAVA_LV0				0x005c
+#define SYSREG_JAVA_LV1				0x0060
+#define SYSREG_JAVA_LV2				0x0064
+#define SYSREG_JAVA_LV3				0x0068
+#define SYSREG_JAVA_LV4				0x006c
+#define SYSREG_JAVA_LV5				0x0070
+#define SYSREG_JAVA_LV6				0x0074
+#define SYSREG_JAVA_LV7				0x0078
+#define SYSREG_JTBA				0x007c
+#define SYSREG_JBCR				0x0080
+#define SYSREG_CONFIG0				0x0100
+#define SYSREG_CONFIG1				0x0104
+#define SYSREG_COUNT				0x0108
+#define SYSREG_COMPARE				0x010c
+#define SYSREG_TLBEHI				0x0110
+#define SYSREG_TLBELO				0x0114
+#define SYSREG_PTBR				0x0118
+#define SYSREG_TLBEAR				0x011c
+#define SYSREG_MMUCR				0x0120
+#define SYSREG_TLBARLO				0x0124
+#define SYSREG_TLBARHI				0x0128
+#define SYSREG_PCCNT				0x012c
+#define SYSREG_PCNT0				0x0130
+#define SYSREG_PCNT1				0x0134
+#define SYSREG_PCCR				0x0138
+#define SYSREG_BEAR				0x013c
+#define SYSREG_SABAL				0x0300
+#define SYSREG_SABAH				0x0304
+#define SYSREG_SABD				0x0308
+
+/* Bitfields in SR */
+#define SYSREG_SR_C_OFFSET			0
+#define SYSREG_SR_C_SIZE			1
+#define SYSREG_Z_OFFSET				1
+#define SYSREG_Z_SIZE				1
+#define SYSREG_SR_N_OFFSET			2
+#define SYSREG_SR_N_SIZE			1
+#define SYSREG_SR_V_OFFSET			3
+#define SYSREG_SR_V_SIZE			1
+#define SYSREG_Q_OFFSET				4
+#define SYSREG_Q_SIZE				1
+#define SYSREG_L_OFFSET				5
+#define SYSREG_L_SIZE				1
+#define SYSREG_T_OFFSET				14
+#define SYSREG_T_SIZE				1
+#define SYSREG_SR_R_OFFSET			15
+#define SYSREG_SR_R_SIZE			1
+#define SYSREG_GM_OFFSET			16
+#define SYSREG_GM_SIZE				1
+#define SYSREG_I0M_OFFSET			17
+#define SYSREG_I0M_SIZE				1
+#define SYSREG_I1M_OFFSET			18
+#define SYSREG_I1M_SIZE				1
+#define SYSREG_I2M_OFFSET			19
+#define SYSREG_I2M_SIZE				1
+#define SYSREG_I3M_OFFSET			20
+#define SYSREG_I3M_SIZE				1
+#define SYSREG_EM_OFFSET			21
+#define SYSREG_EM_SIZE				1
+#define SYSREG_MODE_OFFSET			22
+#define SYSREG_MODE_SIZE			3
+#define SYSREG_M0_OFFSET			22
+#define SYSREG_M0_SIZE				1
+#define SYSREG_M1_OFFSET			23
+#define SYSREG_M1_SIZE				1
+#define SYSREG_M2_OFFSET			24
+#define SYSREG_M2_SIZE				1
+#define SYSREG_SR_D_OFFSET			26
+#define SYSREG_SR_D_SIZE			1
+#define SYSREG_DM_OFFSET			27
+#define SYSREG_DM_SIZE				1
+#define SYSREG_SR_J_OFFSET			28
+#define SYSREG_SR_J_SIZE			1
+#define SYSREG_H_OFFSET				29
+#define SYSREG_H_SIZE				1
+
+/* Bitfields in CPUCR */
+#define SYSREG_BI_OFFSET			0
+#define SYSREG_BI_SIZE				1
+#define SYSREG_BE_OFFSET			1
+#define SYSREG_BE_SIZE				1
+#define SYSREG_FE_OFFSET			2
+#define SYSREG_FE_SIZE				1
+#define SYSREG_RE_OFFSET			3
+#define SYSREG_RE_SIZE				1
+#define SYSREG_IBE_OFFSET			4
+#define SYSREG_IBE_SIZE				1
+#define SYSREG_IEE_OFFSET			5
+#define SYSREG_IEE_SIZE				1
+
+/* Bitfields in CONFIG0 */
+#define SYSREG_CONFIG0_R_OFFSET			0
+#define SYSREG_CONFIG0_R_SIZE			1
+#define SYSREG_CONFIG0_D_OFFSET			1
+#define SYSREG_CONFIG0_D_SIZE			1
+#define SYSREG_CONFIG0_S_OFFSET			2
+#define SYSREG_CONFIG0_S_SIZE			1
+#define SYSREG_CONFIG0_O_OFFSET			3
+#define SYSREG_CONFIG0_O_SIZE			1
+#define SYSREG_CONFIG0_P_OFFSET			4
+#define SYSREG_CONFIG0_P_SIZE			1
+#define SYSREG_CONFIG0_J_OFFSET			5
+#define SYSREG_CONFIG0_J_SIZE			1
+#define SYSREG_CONFIG0_F_OFFSET			6
+#define SYSREG_CONFIG0_F_SIZE			1
+#define SYSREG_MMUT_OFFSET			7
+#define SYSREG_MMUT_SIZE			3
+#define SYSREG_AR_OFFSET			10
+#define SYSREG_AR_SIZE				3
+#define SYSREG_AT_OFFSET			13
+#define SYSREG_AT_SIZE				3
+#define SYSREG_PROCESSORREVISION_OFFSET		16
+#define SYSREG_PROCESSORREVISION_SIZE		8
+#define SYSREG_PROCESSORID_OFFSET		24
+#define SYSREG_PROCESSORID_SIZE			8
+
+/* Bitfields in CONFIG1 */
+#define SYSREG_DASS_OFFSET			0
+#define SYSREG_DASS_SIZE			3
+#define SYSREG_DLSZ_OFFSET			3
+#define SYSREG_DLSZ_SIZE			3
+#define SYSREG_DSET_OFFSET			6
+#define SYSREG_DSET_SIZE			4
+#define SYSREG_IASS_OFFSET			10
+#define SYSREG_IASS_SIZE			3
+#define SYSREG_ILSZ_OFFSET			13
+#define SYSREG_ILSZ_SIZE			3
+#define SYSREG_ISET_OFFSET			16
+#define SYSREG_ISET_SIZE			4
+#define SYSREG_DMMUSZ_OFFSET			20
+#define SYSREG_DMMUSZ_SIZE			6
+#define SYSREG_IMMUSZ_OFFSET			26
+#define SYSREG_IMMUSZ_SIZE			6
+
+/* Bitfields in TLBEHI */
+#define SYSREG_ASID_OFFSET			0
+#define SYSREG_ASID_SIZE			8
+#define SYSREG_TLBEHI_I_OFFSET			8
+#define SYSREG_TLBEHI_I_SIZE			1
+#define SYSREG_TLBEHI_V_OFFSET			9
+#define SYSREG_TLBEHI_V_SIZE			1
+#define SYSREG_VPN_OFFSET			10
+#define SYSREG_VPN_SIZE				22
+
+/* Bitfields in TLBELO */
+#define SYSREG_W_OFFSET				0
+#define SYSREG_W_SIZE				1
+#define SYSREG_TLBELO_D_OFFSET			1
+#define SYSREG_TLBELO_D_SIZE			1
+#define SYSREG_SZ_OFFSET			2
+#define SYSREG_SZ_SIZE				2
+#define SYSREG_AP_OFFSET			4
+#define SYSREG_AP_SIZE				3
+#define SYSREG_B_OFFSET				7
+#define SYSREG_B_SIZE				1
+#define SYSREG_G_OFFSET				8
+#define SYSREG_G_SIZE				1
+#define SYSREG_TLBELO_C_OFFSET			9
+#define SYSREG_TLBELO_C_SIZE			1
+#define SYSREG_PFN_OFFSET			10
+#define SYSREG_PFN_SIZE				22
+
+/* Bitfields in MMUCR */
+#define SYSREG_E_OFFSET				0
+#define SYSREG_E_SIZE				1
+#define SYSREG_M_OFFSET				1
+#define SYSREG_M_SIZE				1
+#define SYSREG_MMUCR_I_OFFSET			2
+#define SYSREG_MMUCR_I_SIZE			1
+#define SYSREG_MMUCR_N_OFFSET			3
+#define SYSREG_MMUCR_N_SIZE			1
+#define SYSREG_MMUCR_S_OFFSET			4
+#define SYSREG_MMUCR_S_SIZE			1
+#define SYSREG_DLA_OFFSET			8
+#define SYSREG_DLA_SIZE				6
+#define SYSREG_DRP_OFFSET			14
+#define SYSREG_DRP_SIZE				6
+#define SYSREG_ILA_OFFSET			20
+#define SYSREG_ILA_SIZE				6
+#define SYSREG_IRP_OFFSET			26
+#define SYSREG_IRP_SIZE				6
+
+/* Bitfields in PCCR */
+#define SYSREG_PCCR_E_OFFSET			0
+#define SYSREG_PCCR_E_SIZE			1
+#define SYSREG_PCCR_R_OFFSET			1
+#define SYSREG_PCCR_R_SIZE			1
+#define SYSREG_PCCR_C_OFFSET			2
+#define SYSREG_PCCR_C_SIZE			1
+#define SYSREG_PCCR_S_OFFSET			3
+#define SYSREG_PCCR_S_SIZE			1
+#define SYSREG_IEC_OFFSET			4
+#define SYSREG_IEC_SIZE				1
+#define SYSREG_IE0_OFFSET			5
+#define SYSREG_IE0_SIZE				1
+#define SYSREG_IE1_OFFSET			6
+#define SYSREG_IE1_SIZE				1
+#define SYSREG_FC_OFFSET			8
+#define SYSREG_FC_SIZE				1
+#define SYSREG_F0_OFFSET			9
+#define SYSREG_F0_SIZE				1
+#define SYSREG_F1_OFFSET			10
+#define SYSREG_F1_SIZE				1
+#define SYSREG_CONF0_OFFSET			12
+#define SYSREG_CONF0_SIZE			6
+#define SYSREG_CONF1_OFFSET			18
+#define SYSREG_CONF1_SIZE			6
+
+/* Constants for ECR */
+#define ECR_UNRECOVERABLE			0
+#define ECR_TLB_MULTIPLE			1
+#define ECR_BUS_ERROR_WRITE			2
+#define ECR_BUS_ERROR_READ			3
+#define ECR_NMI					4
+#define ECR_ADDR_ALIGN_X			5
+#define ECR_PROTECTION_X			6
+#define ECR_DEBUG				7
+#define ECR_ILLEGAL_OPCODE			8
+#define ECR_UNIMPL_INSTRUCTION			9
+#define ECR_PRIVILEGE_VIOLATION			10
+#define ECR_FPE					11
+#define ECR_COPROC_ABSENT			12
+#define ECR_ADDR_ALIGN_R			13
+#define ECR_ADDR_ALIGN_W			14
+#define ECR_PROTECTION_R			15
+#define ECR_PROTECTION_W			16
+#define ECR_DTLB_MODIFIED			17
+#define ECR_TLB_MISS_X				20
+#define ECR_TLB_MISS_R				24
+#define ECR_TLB_MISS_W				28
+
+/* Bit manipulation macros */
+#define SYSREG_BIT(name)				\
+	(1 << SYSREG_##name##_OFFSET)
+#define SYSREG_BF(name,value)				\
+	(((value) & ((1 << SYSREG_##name##_SIZE) - 1))	\
+	 << SYSREG_##name##_OFFSET)
+#define SYSREG_BFEXT(name,value)\
+	(((value) >> SYSREG_##name##_OFFSET)		\
+	 & ((1 << SYSREG_##name##_SIZE) - 1))
+#define SYSREG_BFINS(name,value,old)			\
+	(((old) & ~(((1 << SYSREG_##name##_SIZE) - 1)	\
+		    << SYSREG_##name##_OFFSET))		\
+	 | SYSREG_BF(name,value))
+
+/* Register access macros */
+#ifdef __CHECKER__
+extern unsigned long __builtin_mfsr(unsigned long reg);
+extern void __builtin_mtsr(unsigned long reg, unsigned long value);
+#endif
+
+#define sysreg_read(reg)		__builtin_mfsr(SYSREG_##reg)
+#define sysreg_write(reg, value)	__builtin_mtsr(SYSREG_##reg, value)
+
+#endif /* __ASM_AVR32_SYSREG_H */
diff --git a/arch/avr32/include/asm/system.h b/arch/avr32/include/asm/system.h
new file mode 100644
index 000000000000..9702c2213e1e
--- /dev/null
+++ b/arch/avr32/include/asm/system.h
@@ -0,0 +1,178 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_SYSTEM_H
+#define __ASM_AVR32_SYSTEM_H
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+
+#include <asm/ptrace.h>
+#include <asm/sysreg.h>
+
+#define xchg(ptr,x) \
+	((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+#define nop() asm volatile("nop")
+
+#define mb()			asm volatile("" : : : "memory")
+#define rmb()			mb()
+#define wmb()			asm volatile("sync 0" : : : "memory")
+#define read_barrier_depends()  do { } while(0)
+#define set_mb(var, value)      do { var = value; mb(); } while(0)
+
+/*
+ * Help PathFinder and other Nexus-compliant debuggers keep track of
+ * the current PID by emitting an Ownership Trace Message each time we
+ * switch task.
+ */
+#ifdef CONFIG_OWNERSHIP_TRACE
+#include <asm/ocd.h>
+#define finish_arch_switch(prev)			\
+	do {						\
+		ocd_write(PID, prev->pid);		\
+		ocd_write(PID, current->pid);		\
+	} while(0)
+#endif
+
+/*
+ * switch_to(prev, next, last) should switch from task `prev' to task
+ * `next'. `prev' will never be the same as `next'.
+ *
+ * We just delegate everything to the __switch_to assembly function,
+ * which is implemented in arch/avr32/kernel/switch_to.S
+ *
+ * mb() tells GCC not to cache `current' across this call.
+ */
+struct cpu_context;
+struct task_struct;
+extern struct task_struct *__switch_to(struct task_struct *,
+				       struct cpu_context *,
+				       struct cpu_context *);
+#define switch_to(prev, next, last)					\
+	do {								\
+		last = __switch_to(prev, &prev->thread.cpu_context + 1,	\
+				   &next->thread.cpu_context);		\
+	} while (0)
+
+#ifdef CONFIG_SMP
+# error "The AVR32 port does not support SMP"
+#else
+# define smp_mb()		barrier()
+# define smp_rmb()		barrier()
+# define smp_wmb()		barrier()
+# define smp_read_barrier_depends() do { } while(0)
+#endif
+
+#include <linux/irqflags.h>
+
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long xchg_u32(u32 val, volatile u32 *m)
+{
+	u32 ret;
+
+	asm volatile("xchg %[ret], %[m], %[val]"
+			: [ret] "=&r"(ret), "=m"(*m)
+			: "m"(*m), [m] "r"(m), [val] "r"(val)
+			: "memory");
+	return ret;
+}
+
+static inline unsigned long __xchg(unsigned long x,
+				       volatile void *ptr,
+				       int size)
+{
+	switch(size) {
+	case 4:
+		return xchg_u32(x, ptr);
+	default:
+		__xchg_called_with_bad_pointer();
+		return x;
+	}
+}
+
+static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
+					  unsigned long new)
+{
+	__u32 ret;
+
+	asm volatile(
+		"1:	ssrf	5\n"
+		"	ld.w	%[ret], %[m]\n"
+		"	cp.w	%[ret], %[old]\n"
+		"	brne	2f\n"
+		"	stcond	%[m], %[new]\n"
+		"	brne	1b\n"
+		"2:\n"
+		: [ret] "=&r"(ret), [m] "=m"(*m)
+		: "m"(m), [old] "ir"(old), [new] "r"(new)
+		: "memory", "cc");
+	return ret;
+}
+
+extern unsigned long __cmpxchg_u64_unsupported_on_32bit_kernels(
+        volatile int * m, unsigned long old, unsigned long new);
+#define __cmpxchg_u64 __cmpxchg_u64_unsupported_on_32bit_kernels
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+				      unsigned long new, int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32(ptr, old, new);
+	case 8:
+		return __cmpxchg_u64(ptr, old, new);
+	}
+
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr, old, new)					\
+	((typeof(*(ptr)))__cmpxchg((ptr), (unsigned long)(old),	\
+				   (unsigned long)(new),	\
+				   sizeof(*(ptr))))
+
+#include <asm-generic/cmpxchg-local.h>
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+				      unsigned long old,
+				      unsigned long new, int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32(ptr, old, new);
+	default:
+		return __cmpxchg_local_generic(ptr, old, new, size);
+	}
+
+	return old;
+}
+
+#define cmpxchg_local(ptr, old, new)					\
+	((typeof(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(old),	\
+				   (unsigned long)(new),		\
+				   sizeof(*(ptr))))
+
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+struct pt_regs;
+void NORET_TYPE die(const char *str, struct pt_regs *regs, long err);
+void _exception(long signr, struct pt_regs *regs, int code,
+		unsigned long addr);
+
+#define arch_align_stack(x)	(x)
+
+#endif /* __ASM_AVR32_SYSTEM_H */
diff --git a/arch/avr32/include/asm/termbits.h b/arch/avr32/include/asm/termbits.h
new file mode 100644
index 000000000000..db2daab31fdb
--- /dev/null
+++ b/arch/avr32/include/asm/termbits.h
@@ -0,0 +1,195 @@
+#ifndef __ASM_AVR32_TERMBITS_H
+#define __ASM_AVR32_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* __ASM_AVR32_TERMBITS_H */
diff --git a/arch/avr32/include/asm/termios.h b/arch/avr32/include/asm/termios.h
new file mode 100644
index 000000000000..0152aba35154
--- /dev/null
+++ b/arch/avr32/include/asm/termios.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_TERMIOS_H
+#define __ASM_AVR32_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+#include <asm-generic/termios.h>
+
+#endif	/* __KERNEL__ */
+
+#endif	/* __ASM_AVR32_TERMIOS_H */
diff --git a/arch/avr32/include/asm/thread_info.h b/arch/avr32/include/asm/thread_info.h
new file mode 100644
index 000000000000..294b25f9323d
--- /dev/null
+++ b/arch/avr32/include/asm/thread_info.h
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_THREAD_INFO_H
+#define __ASM_AVR32_THREAD_INFO_H
+
+#include <asm/page.h>
+
+#define THREAD_SIZE_ORDER	1
+#define THREAD_SIZE		(PAGE_SIZE << THREAD_SIZE_ORDER)
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+struct task_struct;
+struct exec_domain;
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	__u32			cpu;
+	__s32			preempt_count;	/* 0 => preemptable, <0 => BUG */
+	__u32			rar_saved;	/* return address... */
+	__u32			rsr_saved;	/* ...and status register
+						   saved by debug handler
+						   when setting up
+						   trampoline */
+	struct restart_block	restart_block;
+	__u8			supervisor_stack[0];
+};
+
+#define INIT_THREAD_INFO(tsk)						\
+{									\
+	.task		= &tsk,						\
+	.exec_domain	= &default_exec_domain,				\
+	.flags		= 0,						\
+	.cpu		= 0,						\
+	.preempt_count	= 1,						\
+	.restart_block	= {						\
+		.fn	= do_no_restart_syscall				\
+	}								\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/*
+ * Get the thread information struct from C.
+ * We do the usual trick and use the lower end of the stack for this
+ */
+static inline struct thread_info *current_thread_info(void)
+{
+	unsigned long addr = ~(THREAD_SIZE - 1);
+
+	asm("and %0, sp" : "=r"(addr) : "0"(addr));
+	return (struct thread_info *)addr;
+}
+
+#define get_thread_info(ti) get_task_struct((ti)->task)
+#define put_thread_info(ti) put_task_struct((ti)->task)
+
+#endif /* !__ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE		0x40000000
+
+/*
+ * Thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
+#define TIF_SIGPENDING          1       /* signal pending */
+#define TIF_NEED_RESCHED        2       /* rescheduling necessary */
+#define TIF_POLLING_NRFLAG      3       /* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_BREAKPOINT		4	/* enter monitor mode on return */
+#define TIF_SINGLE_STEP		5	/* single step in progress */
+#define TIF_MEMDIE		6
+#define TIF_RESTORE_SIGMASK	7	/* restore signal mask in do_signal */
+#define TIF_CPU_GOING_TO_SLEEP	8	/* CPU is entering sleep 0 mode */
+#define TIF_FREEZE		29
+#define TIF_DEBUG		30	/* debugging enabled */
+#define TIF_USERSPACE		31      /* true if FS sets userspace */
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_SINGLE_STEP	(1 << TIF_SINGLE_STEP)
+#define _TIF_MEMDIE		(1 << TIF_MEMDIE)
+#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
+
+/* Note: The masks below must never span more than 16 bits! */
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK				\
+	((1 << TIF_SIGPENDING)			\
+	 | (1 << TIF_NEED_RESCHED)		\
+	 | (1 << TIF_POLLING_NRFLAG)		\
+	 | (1 << TIF_BREAKPOINT)		\
+	 | (1 << TIF_RESTORE_SIGMASK))
+
+/* work to do on any return to userspace */
+#define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK | (1 << TIF_SYSCALL_TRACE))
+/* work to do on return from debug mode */
+#define _TIF_DBGWORK_MASK	(_TIF_WORK_MASK & ~(1 << TIF_BREAKPOINT))
+
+#endif /* __ASM_AVR32_THREAD_INFO_H */
diff --git a/arch/avr32/include/asm/timex.h b/arch/avr32/include/asm/timex.h
new file mode 100644
index 000000000000..187dcf38b210
--- /dev/null
+++ b/arch/avr32/include/asm/timex.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_TIMEX_H
+#define __ASM_AVR32_TIMEX_H
+
+/*
+ * This is the frequency of the timer used for Linux's timer interrupt.
+ * The value should be defined as accurate as possible or under certain
+ * circumstances Linux timekeeping might become inaccurate or fail.
+ *
+ * For many system the exact clockrate of the timer isn't known but due to
+ * the way this value is used we can get away with a wrong value as long
+ * as this value is:
+ *
+ *  - a multiple of HZ
+ *  - a divisor of the actual rate
+ *
+ * 500000 is a good such cheat value.
+ *
+ * The obscure number 1193182 is the same as used by the original i8254
+ * time in legacy PC hardware; the chip is never found in AVR32 systems.
+ */
+#define CLOCK_TICK_RATE		500000	/* Underlying HZ */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles (void)
+{
+	return 0;
+}
+
+#define ARCH_HAS_READ_CURRENT_TIMER
+
+#endif /* __ASM_AVR32_TIMEX_H */
diff --git a/arch/avr32/include/asm/tlb.h b/arch/avr32/include/asm/tlb.h
new file mode 100644
index 000000000000..5c55f9ce7c7d
--- /dev/null
+++ b/arch/avr32/include/asm/tlb.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_TLB_H
+#define __ASM_AVR32_TLB_H
+
+#define tlb_start_vma(tlb, vma) \
+	flush_cache_range(vma, vma->vm_start, vma->vm_end)
+
+#define tlb_end_vma(tlb, vma) \
+	flush_tlb_range(vma, vma->vm_start, vma->vm_end)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while(0)
+
+/*
+ * Flush whole TLB for MM
+ */
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+/*
+ * For debugging purposes
+ */
+extern void show_dtlb_entry(unsigned int index);
+extern void dump_dtlb(void);
+
+#endif /* __ASM_AVR32_TLB_H */
diff --git a/arch/avr32/include/asm/tlbflush.h b/arch/avr32/include/asm/tlbflush.h
new file mode 100644
index 000000000000..bf90a786f6be
--- /dev/null
+++ b/arch/avr32/include/asm/tlbflush.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_TLBFLUSH_H
+#define __ASM_AVR32_TLBFLUSH_H
+
+#include <asm/mmu.h>
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs
+ *  - flush_tlb_all() flushes all processes' TLB entries
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLBs
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ */
+extern void flush_tlb(void);
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			    unsigned long end);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
+
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#endif /* __ASM_AVR32_TLBFLUSH_H */
diff --git a/arch/avr32/include/asm/topology.h b/arch/avr32/include/asm/topology.h
new file mode 100644
index 000000000000..5b766cbb4806
--- /dev/null
+++ b/arch/avr32/include/asm/topology.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_AVR32_TOPOLOGY_H
+#define __ASM_AVR32_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* __ASM_AVR32_TOPOLOGY_H */
diff --git a/arch/avr32/include/asm/traps.h b/arch/avr32/include/asm/traps.h
new file mode 100644
index 000000000000..6a8fb944f414
--- /dev/null
+++ b/arch/avr32/include/asm/traps.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_TRAPS_H
+#define __ASM_AVR32_TRAPS_H
+
+#include <linux/list.h>
+
+struct undef_hook {
+	struct list_head node;
+	u32 insn_mask;
+	u32 insn_val;
+	int (*fn)(struct pt_regs *regs, u32 insn);
+};
+
+void register_undef_hook(struct undef_hook *hook);
+void unregister_undef_hook(struct undef_hook *hook);
+
+#endif /* __ASM_AVR32_TRAPS_H */
diff --git a/arch/avr32/include/asm/types.h b/arch/avr32/include/asm/types.h
new file mode 100644
index 000000000000..9cefda6f534a
--- /dev/null
+++ b/arch/avr32/include/asm/types.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_TYPES_H
+#define __ASM_AVR32_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+
+#endif /* __ASM_AVR32_TYPES_H */
diff --git a/arch/avr32/include/asm/uaccess.h b/arch/avr32/include/asm/uaccess.h
new file mode 100644
index 000000000000..ed092395215e
--- /dev/null
+++ b/arch/avr32/include/asm/uaccess.h
@@ -0,0 +1,324 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_UACCESS_H
+#define __ASM_AVR32_UACCESS_H
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+typedef struct {
+	unsigned int is_user_space;
+} mm_segment_t;
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons (Data Segment Register?), these macros are misnamed.
+ */
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+#define segment_eq(a,b)	((a).is_user_space == (b).is_user_space)
+
+#define USER_ADDR_LIMIT 0x80000000
+
+#define KERNEL_DS	MAKE_MM_SEG(0)
+#define USER_DS		MAKE_MM_SEG(1)
+
+#define get_ds()	(KERNEL_DS)
+
+static inline mm_segment_t get_fs(void)
+{
+	return MAKE_MM_SEG(test_thread_flag(TIF_USERSPACE));
+}
+
+static inline void set_fs(mm_segment_t s)
+{
+	if (s.is_user_space)
+		set_thread_flag(TIF_USERSPACE);
+	else
+		clear_thread_flag(TIF_USERSPACE);
+}
+
+/*
+ * Test whether a block of memory is a valid user space address.
+ * Returns 0 if the range is valid, nonzero otherwise.
+ *
+ * We do the following checks:
+ *   1. Is the access from kernel space?
+ *   2. Does (addr + size) set the carry bit?
+ *   3. Is (addr + size) a negative number (i.e. >= 0x80000000)?
+ *
+ * If yes on the first check, access is granted.
+ * If no on any of the others, access is denied.
+ */
+#define __range_ok(addr, size)						\
+	(test_thread_flag(TIF_USERSPACE)				\
+	 && (((unsigned long)(addr) >= 0x80000000)			\
+	     || ((unsigned long)(size) > 0x80000000)			\
+	     || (((unsigned long)(addr) + (unsigned long)(size)) > 0x80000000)))
+
+#define access_ok(type, addr, size) (likely(__range_ok(addr, size) == 0))
+
+/* Generic arbitrary sized copy. Return the number of bytes NOT copied */
+extern __kernel_size_t __copy_user(void *to, const void *from,
+				   __kernel_size_t n);
+
+extern __kernel_size_t copy_to_user(void __user *to, const void *from,
+				    __kernel_size_t n);
+extern __kernel_size_t copy_from_user(void *to, const void __user *from,
+				      __kernel_size_t n);
+
+static inline __kernel_size_t __copy_to_user(void __user *to, const void *from,
+					     __kernel_size_t n)
+{
+	return __copy_user((void __force *)to, from, n);
+}
+static inline __kernel_size_t __copy_from_user(void *to,
+					       const void __user *from,
+					       __kernel_size_t n)
+{
+	return __copy_user(to, (const void __force *)from, n);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+/*
+ * put_user: - Write a simple value into user space.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x,ptr)	\
+	__put_user_check((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * get_user: - Get a simple variable from user space.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define get_user(x,ptr) \
+	__get_user_check((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x:   Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define __put_user(x,ptr) \
+	__put_user_nocheck((x),(ptr),sizeof(*(ptr)))
+
+/*
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x:   Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space.  It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#define __get_user(x,ptr) \
+	__get_user_nocheck((x),(ptr),sizeof(*(ptr)))
+
+extern int __get_user_bad(void);
+extern int __put_user_bad(void);
+
+#define __get_user_nocheck(x, ptr, size)				\
+({									\
+	unsigned long __gu_val = 0;					\
+	int __gu_err = 0;						\
+									\
+	switch (size) {							\
+	case 1: __get_user_asm("ub", __gu_val, ptr, __gu_err); break;	\
+	case 2: __get_user_asm("uh", __gu_val, ptr, __gu_err); break;	\
+	case 4: __get_user_asm("w", __gu_val, ptr, __gu_err); break;	\
+	default: __gu_err = __get_user_bad(); break;			\
+	}								\
+									\
+	x = (typeof(*(ptr)))__gu_val;					\
+	__gu_err;							\
+})
+
+#define __get_user_check(x, ptr, size)					\
+({									\
+	unsigned long __gu_val = 0;					\
+	const typeof(*(ptr)) __user * __gu_addr = (ptr);		\
+	int __gu_err = 0;						\
+									\
+	if (access_ok(VERIFY_READ, __gu_addr, size)) {			\
+		switch (size) {						\
+		case 1:							\
+			__get_user_asm("ub", __gu_val, __gu_addr,	\
+				       __gu_err);			\
+			break;						\
+		case 2:							\
+			__get_user_asm("uh", __gu_val, __gu_addr,	\
+				       __gu_err);			\
+			break;						\
+		case 4:							\
+			__get_user_asm("w", __gu_val, __gu_addr,	\
+				       __gu_err);			\
+			break;						\
+		default:						\
+			__gu_err = __get_user_bad();			\
+			break;						\
+		}							\
+	} else {							\
+		__gu_err = -EFAULT;					\
+	}								\
+	x = (typeof(*(ptr)))__gu_val;					\
+	__gu_err;							\
+})
+
+#define __get_user_asm(suffix, __gu_val, ptr, __gu_err)			\
+	asm volatile(							\
+		"1:	ld." suffix "	%1, %3			\n"	\
+		"2:						\n"	\
+		"	.section .fixup, \"ax\"			\n"	\
+		"3:	mov	%0, %4				\n"	\
+		"	rjmp	2b				\n"	\
+		"	.previous				\n"	\
+		"	.section __ex_table, \"a\"		\n"	\
+		"	.long	1b, 3b				\n"	\
+		"	.previous				\n"	\
+		: "=r"(__gu_err), "=r"(__gu_val)			\
+		: "0"(__gu_err), "m"(*(ptr)), "i"(-EFAULT))
+
+#define __put_user_nocheck(x, ptr, size)				\
+({									\
+	typeof(*(ptr)) __pu_val;					\
+	int __pu_err = 0;						\
+									\
+	__pu_val = (x);							\
+	switch (size) {							\
+	case 1: __put_user_asm("b", ptr, __pu_val, __pu_err); break;	\
+	case 2: __put_user_asm("h", ptr, __pu_val, __pu_err); break;	\
+	case 4: __put_user_asm("w", ptr, __pu_val, __pu_err); break;	\
+	case 8: __put_user_asm("d", ptr, __pu_val, __pu_err); break;	\
+	default: __pu_err = __put_user_bad(); break;			\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_user_check(x, ptr, size)					\
+({									\
+	typeof(*(ptr)) __pu_val;					\
+	typeof(*(ptr)) __user *__pu_addr = (ptr);			\
+	int __pu_err = 0;						\
+									\
+	__pu_val = (x);							\
+	if (access_ok(VERIFY_WRITE, __pu_addr, size)) {			\
+		switch (size) {						\
+		case 1:							\
+			__put_user_asm("b", __pu_addr, __pu_val,	\
+				       __pu_err);			\
+			break;						\
+		case 2:							\
+			__put_user_asm("h", __pu_addr, __pu_val,	\
+				       __pu_err);			\
+			break;						\
+		case 4:							\
+			__put_user_asm("w", __pu_addr, __pu_val,	\
+				       __pu_err);			\
+			break;						\
+		case 8:							\
+			__put_user_asm("d", __pu_addr, __pu_val,		\
+				       __pu_err);			\
+			break;						\
+		default:						\
+			__pu_err = __put_user_bad();			\
+			break;						\
+		}							\
+	} else {							\
+		__pu_err = -EFAULT;					\
+	}								\
+	__pu_err;							\
+})
+
+#define __put_user_asm(suffix, ptr, __pu_val, __gu_err)			\
+	asm volatile(							\
+		"1:	st." suffix "	%1, %3			\n"	\
+		"2:						\n"	\
+		"	.section .fixup, \"ax\"			\n"	\
+		"3:	mov	%0, %4				\n"	\
+		"	rjmp	2b				\n"	\
+		"	.previous				\n"	\
+		"	.section __ex_table, \"a\"		\n"	\
+		"	.long	1b, 3b				\n"	\
+		"	.previous				\n"	\
+		: "=r"(__gu_err), "=m"(*(ptr))				\
+		: "0"(__gu_err), "r"(__pu_val), "i"(-EFAULT))
+
+extern __kernel_size_t clear_user(void __user *addr, __kernel_size_t size);
+extern __kernel_size_t __clear_user(void __user *addr, __kernel_size_t size);
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern long __strncpy_from_user(char *dst, const char __user *src, long count);
+
+extern long strnlen_user(const char __user *__s, long __n);
+extern long __strnlen_user(const char __user *__s, long __n);
+
+#define strlen_user(s) strnlen_user(s, ~0UL >> 1)
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+#endif /* __ASM_AVR32_UACCESS_H */
diff --git a/arch/avr32/include/asm/ucontext.h b/arch/avr32/include/asm/ucontext.h
new file mode 100644
index 000000000000..ac7259c2a799
--- /dev/null
+++ b/arch/avr32/include/asm/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_AVR32_UCONTEXT_H
+#define __ASM_AVR32_UCONTEXT_H
+
+struct ucontext {
+	unsigned long		uc_flags;
+	struct ucontext	*	uc_link;
+	stack_t			uc_stack;
+	struct sigcontext	uc_mcontext;
+	sigset_t		uc_sigmask;
+};
+
+#endif /* __ASM_AVR32_UCONTEXT_H */
diff --git a/arch/avr32/include/asm/unaligned.h b/arch/avr32/include/asm/unaligned.h
new file mode 100644
index 000000000000..041877290470
--- /dev/null
+++ b/arch/avr32/include/asm/unaligned.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_AVR32_UNALIGNED_H
+#define _ASM_AVR32_UNALIGNED_H
+
+/*
+ * AVR32 can handle some unaligned accesses, depending on the
+ * implementation.  The AVR32 AP implementation can handle unaligned
+ * words, but halfwords must be halfword-aligned, and doublewords must
+ * be word-aligned.
+ *
+ * However, swapped word loads must be word-aligned so we can't
+ * optimize word loads in general.
+ */
+
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+
+#endif /* _ASM_AVR32_UNALIGNED_H */
diff --git a/arch/avr32/include/asm/unistd.h b/arch/avr32/include/asm/unistd.h
new file mode 100644
index 000000000000..89861a27543e
--- /dev/null
+++ b/arch/avr32/include/asm/unistd.h
@@ -0,0 +1,345 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_UNISTD_H
+#define __ASM_AVR32_UNISTD_H
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_umask		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_chown		 16
+#define __NR_lchown		 17
+#define __NR_lseek		 18
+#define __NR__llseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount2		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_pause		 28
+#define __NR_utime		 29
+#define __NR_stat		 30
+#define __NR_fstat		 31
+#define __NR_lstat		 32
+#define __NR_access		 33
+#define __NR_chroot		 34
+#define __NR_sync		 35
+#define __NR_fsync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_clone		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_getcwd		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_setfsuid		 52
+#define __NR_setfsgid		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_setpgid		 56
+#define __NR_mremap		 57
+#define __NR_setresuid		 58
+#define __NR_getresuid		 59
+#define __NR_setreuid		 60
+#define __NR_setregid		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_rt_sigaction	 67
+#define __NR_rt_sigreturn	 68
+#define __NR_rt_sigprocmask	 69
+#define __NR_rt_sigpending	 70
+#define __NR_rt_sigtimedwait	 71
+#define __NR_rt_sigqueueinfo	 72
+#define __NR_rt_sigsuspend	 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76	/* SuS compliant getrlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_fchdir		 84
+#define __NR_readlink		 85
+#define __NR_pread		 86
+#define __NR_pwrite		 87
+#define __NR_swapon		 88
+#define __NR_reboot		 89
+#define __NR_mmap2		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_wait4		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_vhangup		101
+#define __NR_sigaltstack	102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_swapoff		106
+#define __NR_sysinfo		107
+/* 108 was __NR_ipc for a little while */
+#define __NR_sendfile		109
+#define __NR_setdomainname	110
+#define __NR_uname		111
+#define __NR_adjtimex		112
+#define __NR_mprotect		113
+#define __NR_vfork		114
+#define __NR_init_module	115
+#define __NR_delete_module	116
+#define __NR_quotactl		117
+#define __NR_getpgid		118
+#define __NR_bdflush		119
+#define __NR_sysfs		120
+#define __NR_personality	121
+#define __NR_afs_syscall	122 /* Syscall for Andrew File System */
+#define __NR_getdents		123
+#define __NR_flock		124
+#define __NR_msync		125
+#define __NR_readv		126
+#define __NR_writev		127
+#define __NR_getsid		128
+#define __NR_fdatasync		129
+#define __NR__sysctl		130
+#define __NR_mlock		131
+#define __NR_munlock		132
+#define __NR_mlockall		133
+#define __NR_munlockall		134
+#define __NR_sched_setparam		135
+#define __NR_sched_getparam		136
+#define __NR_sched_setscheduler		137
+#define __NR_sched_getscheduler		138
+#define __NR_sched_yield		139
+#define __NR_sched_get_priority_max	140
+#define __NR_sched_get_priority_min	141
+#define __NR_sched_rr_get_interval	142
+#define __NR_nanosleep		143
+#define __NR_poll		144
+#define __NR_nfsservctl		145
+#define __NR_setresgid		146
+#define __NR_getresgid		147
+#define __NR_prctl              148
+#define __NR_socket		149
+#define __NR_bind		150
+#define __NR_connect		151
+#define __NR_listen		152
+#define __NR_accept		153
+#define __NR_getsockname	154
+#define __NR_getpeername	155
+#define __NR_socketpair		156
+#define __NR_send		157
+#define __NR_recv		158
+#define __NR_sendto		159
+#define __NR_recvfrom		160
+#define __NR_shutdown		161
+#define __NR_setsockopt		162
+#define __NR_getsockopt		163
+#define __NR_sendmsg		164
+#define __NR_recvmsg		165
+#define __NR_truncate64		166
+#define __NR_ftruncate64	167
+#define __NR_stat64		168
+#define __NR_lstat64		169
+#define __NR_fstat64		170
+#define __NR_pivot_root		171
+#define __NR_mincore		172
+#define __NR_madvise		173
+#define __NR_getdents64		174
+#define __NR_fcntl64		175
+#define __NR_gettid		176
+#define __NR_readahead		177
+#define __NR_setxattr		178
+#define __NR_lsetxattr		179
+#define __NR_fsetxattr		180
+#define __NR_getxattr		181
+#define __NR_lgetxattr		182
+#define __NR_fgetxattr		183
+#define __NR_listxattr		184
+#define __NR_llistxattr		185
+#define __NR_flistxattr		186
+#define __NR_removexattr	187
+#define __NR_lremovexattr	188
+#define __NR_fremovexattr	189
+#define __NR_tkill		190
+#define __NR_sendfile64		191
+#define __NR_futex		192
+#define __NR_sched_setaffinity	193
+#define __NR_sched_getaffinity	194
+#define __NR_capget		195
+#define __NR_capset		196
+#define __NR_io_setup		197
+#define __NR_io_destroy		198
+#define __NR_io_getevents	199
+#define __NR_io_submit		200
+#define __NR_io_cancel		201
+#define __NR_fadvise64		202
+#define __NR_exit_group		203
+#define __NR_lookup_dcookie	204
+#define __NR_epoll_create	205
+#define __NR_epoll_ctl		206
+#define __NR_epoll_wait		207
+#define __NR_remap_file_pages	208
+#define __NR_set_tid_address	209
+
+#define __NR_timer_create	210
+#define __NR_timer_settime	211
+#define __NR_timer_gettime	212
+#define __NR_timer_getoverrun	213
+#define __NR_timer_delete	214
+#define __NR_clock_settime	215
+#define __NR_clock_gettime	216
+#define __NR_clock_getres	217
+#define __NR_clock_nanosleep	218
+#define __NR_statfs64		219
+#define __NR_fstatfs64		220
+#define __NR_tgkill		221
+				/* 222 reserved for tux */
+#define __NR_utimes		223
+#define __NR_fadvise64_64	224
+
+#define __NR_cacheflush		225
+
+#define __NR_vserver		226
+#define __NR_mq_open		227
+#define __NR_mq_unlink		228
+#define __NR_mq_timedsend	229
+#define __NR_mq_timedreceive	230
+#define __NR_mq_notify		231
+#define __NR_mq_getsetattr	232
+#define __NR_kexec_load		233
+#define __NR_waitid		234
+#define __NR_add_key		235
+#define __NR_request_key	236
+#define __NR_keyctl		237
+#define __NR_ioprio_set		238
+#define __NR_ioprio_get		239
+#define __NR_inotify_init	240
+#define __NR_inotify_add_watch	241
+#define __NR_inotify_rm_watch	242
+#define __NR_openat		243
+#define __NR_mkdirat		244
+#define __NR_mknodat		245
+#define __NR_fchownat		246
+#define __NR_futimesat		247
+#define __NR_fstatat64		248
+#define __NR_unlinkat		249
+#define __NR_renameat		250
+#define __NR_linkat		251
+#define __NR_symlinkat		252
+#define __NR_readlinkat		253
+#define __NR_fchmodat		254
+#define __NR_faccessat		255
+#define __NR_pselect6		256
+#define __NR_ppoll		257
+#define __NR_unshare		258
+#define __NR_set_robust_list	259
+#define __NR_get_robust_list	260
+#define __NR_splice		261
+#define __NR_sync_file_range	262
+#define __NR_tee		263
+#define __NR_vmsplice		264
+#define __NR_epoll_pwait	265
+
+#define __NR_msgget		266
+#define __NR_msgsnd		267
+#define __NR_msgrcv		268
+#define __NR_msgctl		269
+#define __NR_semget		270
+#define __NR_semop		271
+#define __NR_semctl		272
+#define __NR_semtimedop		273
+#define __NR_shmat		274
+#define __NR_shmget		275
+#define __NR_shmdt		276
+#define __NR_shmctl		277
+
+#define __NR_utimensat		278
+#define __NR_signalfd		279
+/* 280 was __NR_timerfd */
+#define __NR_eventfd		281
+
+#ifdef __KERNEL__
+#define NR_syscalls		282
+
+/* Old stuff */
+#define __IGNORE_uselib
+#define __IGNORE_mmap
+
+/* NUMA stuff */
+#define __IGNORE_mbind
+#define __IGNORE_get_mempolicy
+#define __IGNORE_set_mempolicy
+#define __IGNORE_migrate_pages
+#define __IGNORE_move_pages
+
+/* SMP stuff */
+#define __IGNORE_getcpu
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall");
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_AVR32_UNISTD_H */
diff --git a/arch/avr32/include/asm/user.h b/arch/avr32/include/asm/user.h
new file mode 100644
index 000000000000..7e9152f81f5e
--- /dev/null
+++ b/arch/avr32/include/asm/user.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Note: We may not need these definitions for AVR32, as we don't
+ * support a.out.
+ */
+#ifndef __ASM_AVR32_USER_H
+#define __ASM_AVR32_USER_H
+
+#include <linux/types.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd).  The file contents are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+
+struct user_fpu_struct {
+	/* We have no FPU (yet) */
+};
+
+struct user {
+	struct pt_regs	regs;			/* entire machine state */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	unsigned long	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* __ASM_AVR32_USER_H */
diff --git a/arch/avr32/include/asm/xor.h b/arch/avr32/include/asm/xor.h
new file mode 100644
index 000000000000..99c87aa0af4f
--- /dev/null
+++ b/arch/avr32/include/asm/xor.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_XOR_H
+#define _ASM_XOR_H
+
+#include <asm-generic/xor.h>
+
+#endif
diff --git a/arch/avr32/kernel/cpu.c b/arch/avr32/kernel/cpu.c
index b8409caeb23d..e84faffbbeca 100644
--- a/arch/avr32/kernel/cpu.c
+++ b/arch/avr32/kernel/cpu.c
@@ -26,14 +26,16 @@ static DEFINE_PER_CPU(struct cpu, cpu_devices);
  * XXX: If/when a SMP-capable implementation of AVR32 will ever be
  * made, we must make sure that the code executes on the correct CPU.
  */
-static ssize_t show_pc0event(struct sys_device *dev, char *buf)
+static ssize_t show_pc0event(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pccr;
 
 	pccr = sysreg_read(PCCR);
 	return sprintf(buf, "0x%lx\n", (pccr >> 12) & 0x3f);
 }
-static ssize_t store_pc0event(struct sys_device *dev, const char *buf,
+static ssize_t store_pc0event(struct sys_device *dev,
+			struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -46,15 +48,17 @@ static ssize_t store_pc0event(struct sys_device *dev, const char *buf,
 	sysreg_write(PCCR, val);
 	return count;
 }
-static ssize_t show_pc0count(struct sys_device *dev, char *buf)
+static ssize_t show_pc0count(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pcnt0;
 
 	pcnt0 = sysreg_read(PCNT0);
 	return sprintf(buf, "%lu\n", pcnt0);
 }
-static ssize_t store_pc0count(struct sys_device *dev, const char *buf,
-			      size_t count)
+static ssize_t store_pc0count(struct sys_device *dev,
+				struct sysdev_attribute *attr,
+				const char *buf, size_t count)
 {
 	unsigned long val;
 	char *endp;
@@ -67,14 +71,16 @@ static ssize_t store_pc0count(struct sys_device *dev, const char *buf,
 	return count;
 }
 
-static ssize_t show_pc1event(struct sys_device *dev, char *buf)
+static ssize_t show_pc1event(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pccr;
 
 	pccr = sysreg_read(PCCR);
 	return sprintf(buf, "0x%lx\n", (pccr >> 18) & 0x3f);
 }
-static ssize_t store_pc1event(struct sys_device *dev, const char *buf,
+static ssize_t store_pc1event(struct sys_device *dev,
+			      struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -87,14 +93,16 @@ static ssize_t store_pc1event(struct sys_device *dev, const char *buf,
 	sysreg_write(PCCR, val);
 	return count;
 }
-static ssize_t show_pc1count(struct sys_device *dev, char *buf)
+static ssize_t show_pc1count(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pcnt1;
 
 	pcnt1 = sysreg_read(PCNT1);
 	return sprintf(buf, "%lu\n", pcnt1);
 }
-static ssize_t store_pc1count(struct sys_device *dev, const char *buf,
+static ssize_t store_pc1count(struct sys_device *dev,
+				struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -108,14 +116,16 @@ static ssize_t store_pc1count(struct sys_device *dev, const char *buf,
 	return count;
 }
 
-static ssize_t show_pccycles(struct sys_device *dev, char *buf)
+static ssize_t show_pccycles(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pccnt;
 
 	pccnt = sysreg_read(PCCNT);
 	return sprintf(buf, "%lu\n", pccnt);
 }
-static ssize_t store_pccycles(struct sys_device *dev, const char *buf,
+static ssize_t store_pccycles(struct sys_device *dev,
+				struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long val;
@@ -129,14 +139,16 @@ static ssize_t store_pccycles(struct sys_device *dev, const char *buf,
 	return count;
 }
 
-static ssize_t show_pcenable(struct sys_device *dev, char *buf)
+static ssize_t show_pcenable(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long pccr;
 
 	pccr = sysreg_read(PCCR);
 	return sprintf(buf, "%c\n", (pccr & 1)?'1':'0');
 }
-static ssize_t store_pcenable(struct sys_device *dev, const char *buf,
+static ssize_t store_pcenable(struct sys_device *dev,
+			      struct sysdev_attribute *attr, const char *buf,
 			      size_t count)
 {
 	unsigned long pccr, val;
diff --git a/arch/avr32/kernel/process.c b/arch/avr32/kernel/process.c
index 6cf9df176274..2c08ac992ac3 100644
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -18,7 +18,7 @@
 #include <asm/sysreg.h>
 #include <asm/ocd.h>
 
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
 
 void (*pm_power_off)(void) = NULL;
 EXPORT_SYMBOL(pm_power_off);
@@ -31,7 +31,7 @@ void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			cpu_idle_sleep();
 		tick_nohz_restart_sched_tick();
diff --git a/arch/avr32/kernel/setup.c b/arch/avr32/kernel/setup.c
index ce48c14f4349..d8e623c426c1 100644
--- a/arch/avr32/kernel/setup.c
+++ b/arch/avr32/kernel/setup.c
@@ -26,8 +26,8 @@
 #include <asm/setup.h>
 #include <asm/sysreg.h>
 
-#include <asm/arch/board.h>
-#include <asm/arch/init.h>
+#include <mach/board.h>
+#include <mach/init.h>
 
 extern int root_mountflags;
 
diff --git a/arch/avr32/kernel/stacktrace.c b/arch/avr32/kernel/stacktrace.c
index f4bdb448049c..c09f0d8dd679 100644
--- a/arch/avr32/kernel/stacktrace.c
+++ b/arch/avr32/kernel/stacktrace.c
@@ -10,6 +10,7 @@
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
+#include <linux/module.h>
 
 register unsigned long current_frame_pointer asm("r7");
 
diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c
index abd954fb7ba0..283481d74a5b 100644
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
@@ -15,7 +15,7 @@
 
 #include <asm/sysreg.h>
 
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
 
 
 static cycle_t read_cycle_count(void)
@@ -43,6 +43,9 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 {
 	struct clock_event_device *evdev = dev_id;
 
+	if (unlikely(!(intc_get_pending(0) & 1)))
+		return IRQ_NONE;
+
 	/*
 	 * Disable the interrupt until the clockevent subsystem
 	 * reprograms it.
@@ -55,7 +58,8 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
 
 static struct irqaction timer_irqaction = {
 	.handler	= timer_interrupt,
-	.flags		= IRQF_TIMER | IRQF_DISABLED,
+	/* Oprofile uses the same irq as the timer, so allow it to be shared */
+	.flags		= IRQF_TIMER | IRQF_DISABLED | IRQF_SHARED,
 	.name		= "avr32_comparator",
 };
 
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 07b21b121eef..92bfb4d8ae45 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -7,20 +7,23 @@
  */
 #include <linux/clk.h>
 #include <linux/delay.h>
+#include <linux/dw_dmac.h>
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
 
+#include <asm/atmel-mci.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/at32ap700x.h>
-#include <asm/arch/board.h>
-#include <asm/arch/portmux.h>
-#include <asm/arch/sram.h>
+#include <mach/at32ap700x.h>
+#include <mach/board.h>
+#include <mach/portmux.h>
+#include <mach/sram.h>
 
 #include <video/atmel_lcdc.h>
 
@@ -593,6 +596,17 @@ static void __init genclk_init_parent(struct clk *clk)
 	clk->parent = parent;
 }
 
+static struct dw_dma_platform_data dw_dmac0_data = {
+	.nr_channels	= 3,
+};
+
+static struct resource dw_dmac0_resource[] = {
+	PBMEM(0xff200000),
+	IRQ(2),
+};
+DEFINE_DEV_DATA(dw_dmac, 0);
+DEV_CLK(hclk, dw_dmac0, hsb, 10);
+
 /* --------------------------------------------------------------------
  *  System peripherals
  * -------------------------------------------------------------------- */
@@ -707,17 +721,6 @@ static struct clk pico_clk = {
 	.users		= 1,
 };
 
-static struct resource dmaca0_resource[] = {
-	{
-		.start	= 0xff200000,
-		.end	= 0xff20ffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	IRQ(2),
-};
-DEFINE_DEV(dmaca, 0);
-DEV_CLK(hclk, dmaca0, hsb, 10);
-
 /* --------------------------------------------------------------------
  * HMATRIX
  * -------------------------------------------------------------------- */
@@ -830,7 +833,7 @@ void __init at32_add_system_devices(void)
 	platform_device_register(&at32_eic0_device);
 	platform_device_register(&smc0_device);
 	platform_device_register(&pdc_device);
-	platform_device_register(&dmaca0_device);
+	platform_device_register(&dw_dmac0_device);
 
 	platform_device_register(&at32_tcb0_device);
 	platform_device_register(&at32_tcb1_device);
@@ -1278,20 +1281,33 @@ static struct clk atmel_mci0_pclk = {
 	.index		= 9,
 };
 
-struct platform_device *__init at32_add_device_mci(unsigned int id)
+struct platform_device *__init
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
 {
-	struct platform_device *pdev;
+	struct mci_platform_data	_data;
+	struct platform_device		*pdev;
 
 	if (id != 0)
 		return NULL;
 
 	pdev = platform_device_alloc("atmel_mci", id);
 	if (!pdev)
-		return NULL;
+		goto fail;
 
 	if (platform_device_add_resources(pdev, atmel_mci0_resource,
 				ARRAY_SIZE(atmel_mci0_resource)))
-		goto err_add_resources;
+		goto fail;
+
+	if (!data) {
+		data = &_data;
+		memset(data, -1, sizeof(struct mci_platform_data));
+		data->detect_pin = GPIO_PIN_NONE;
+		data->wp_pin = GPIO_PIN_NONE;
+	}
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct mci_platform_data)))
+		goto fail;
 
 	select_peripheral(PA(10), PERIPH_A, 0);	/* CLK	 */
 	select_peripheral(PA(11), PERIPH_A, 0);	/* CMD	 */
@@ -1300,12 +1316,17 @@ struct platform_device *__init at32_add_device_mci(unsigned int id)
 	select_peripheral(PA(14), PERIPH_A, 0);	/* DATA2 */
 	select_peripheral(PA(15), PERIPH_A, 0);	/* DATA3 */
 
+	if (gpio_is_valid(data->detect_pin))
+		at32_select_gpio(data->detect_pin, 0);
+	if (gpio_is_valid(data->wp_pin))
+		at32_select_gpio(data->wp_pin, 0);
+
 	atmel_mci0_pclk.dev = &pdev->dev;
 
 	platform_device_add(pdev);
 	return pdev;
 
-err_add_resources:
+fail:
 	platform_device_put(pdev);
 	return NULL;
 }
@@ -1832,11 +1853,11 @@ at32_add_device_cf(unsigned int id, unsigned int extint,
 	if (at32_init_ide_or_cf(pdev, data->cs, extint))
 		goto fail;
 
-	if (data->detect_pin != GPIO_PIN_NONE)
+	if (gpio_is_valid(data->detect_pin))
 		at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH);
-	if (data->reset_pin != GPIO_PIN_NONE)
+	if (gpio_is_valid(data->reset_pin))
 		at32_select_gpio(data->reset_pin, 0);
-	if (data->vcc_pin != GPIO_PIN_NONE)
+	if (gpio_is_valid(data->vcc_pin))
 		at32_select_gpio(data->vcc_pin, 0);
 	/* READY is used as extint, so we can't select it as gpio */
 
@@ -1850,6 +1871,58 @@ fail:
 #endif
 
 /* --------------------------------------------------------------------
+ * NAND Flash / SmartMedia
+ * -------------------------------------------------------------------- */
+static struct resource smc_cs3_resource[] __initdata = {
+	{
+		.start	= 0x0c000000,
+		.end	= 0x0fffffff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 0xfff03c00,
+		.end	= 0xfff03fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device *__init
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data)
+{
+	struct platform_device *pdev;
+
+	if (id != 0 || !data)
+		return NULL;
+
+	pdev = platform_device_alloc("atmel_nand", id);
+	if (!pdev)
+		goto fail;
+
+	if (platform_device_add_resources(pdev, smc_cs3_resource,
+				ARRAY_SIZE(smc_cs3_resource)))
+		goto fail;
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct atmel_nand_data)))
+		goto fail;
+
+	set_ebi_sfr_bits(HMATRIX_BIT(CS3A));
+	if (data->enable_pin)
+		at32_select_gpio(data->enable_pin,
+				AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+	if (data->rdy_pin)
+		at32_select_gpio(data->rdy_pin, 0);
+	if (data->det_pin)
+		at32_select_gpio(data->det_pin, 0);
+
+	platform_device_add(pdev);
+	return pdev;
+
+fail:
+	platform_device_put(pdev);
+	return NULL;
+}
+
+/* --------------------------------------------------------------------
  * AC97C
  * -------------------------------------------------------------------- */
 static struct resource atmel_ac97c0_resource[] __initdata = {
@@ -1864,9 +1937,11 @@ static struct clk atmel_ac97c0_pclk = {
 	.index		= 10,
 };
 
-struct platform_device *__init at32_add_device_ac97c(unsigned int id)
+struct platform_device *__init
+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
 {
 	struct platform_device *pdev;
+	struct ac97c_platform_data _data;
 
 	if (id != 0)
 		return NULL;
@@ -1877,19 +1952,37 @@ struct platform_device *__init at32_add_device_ac97c(unsigned int id)
 
 	if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
 				ARRAY_SIZE(atmel_ac97c0_resource)))
-		goto err_add_resources;
+		goto fail;
+
+	if (!data) {
+		data = &_data;
+		memset(data, 0, sizeof(struct ac97c_platform_data));
+		data->reset_pin = GPIO_PIN_NONE;
+	}
 
-	select_peripheral(PB(20), PERIPH_B, 0);	/* SYNC	*/
-	select_peripheral(PB(21), PERIPH_B, 0);	/* SDO	*/
-	select_peripheral(PB(22), PERIPH_B, 0);	/* SDI	*/
-	select_peripheral(PB(23), PERIPH_B, 0);	/* SCLK	*/
+	data->dma_rx_periph_id = 3;
+	data->dma_tx_periph_id = 4;
+	data->dma_controller_id = 0;
+
+	if (platform_device_add_data(pdev, data,
+				sizeof(struct ac97c_platform_data)))
+		goto fail;
+
+	select_peripheral(PB(20), PERIPH_B, 0);	/* SDO	*/
+	select_peripheral(PB(21), PERIPH_B, 0);	/* SYNC	*/
+	select_peripheral(PB(22), PERIPH_B, 0);	/* SCLK	*/
+	select_peripheral(PB(23), PERIPH_B, 0);	/* SDI	*/
+
+	/* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
+	if (data->reset_pin != GPIO_PIN_NONE)
+		at32_select_gpio(data->reset_pin, 0);
 
 	atmel_ac97c0_pclk.dev = &pdev->dev;
 
 	platform_device_add(pdev);
 	return pdev;
 
-err_add_resources:
+fail:
 	platform_device_put(pdev);
 	return NULL;
 }
@@ -2012,7 +2105,7 @@ struct clk *at32_clock_list[] = {
 	&smc0_mck,
 	&pdc_hclk,
 	&pdc_pclk,
-	&dmaca0_hclk,
+	&dw_dmac0_hclk,
 	&pico_clk,
 	&pio0_mck,
 	&pio1_mck,
diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c
index fa427ed42787..2875c11be95d 100644
--- a/arch/avr32/mach-at32ap/hsmc.c
+++ b/arch/avr32/mach-at32ap/hsmc.c
@@ -14,7 +14,7 @@
 #include <linux/platform_device.h>
 
 #include <asm/io.h>
-#include <asm/arch/smc.h>
+#include <mach/smc.h>
 
 #include "hsmc.h"
 
@@ -278,4 +278,4 @@ static int __init hsmc_init(void)
 {
 	return platform_driver_register(&hsmc_driver);
 }
-arch_initcall(hsmc_init);
+core_initcall(hsmc_init);
diff --git a/arch/avr32/mach-at32ap/include/mach/at32ap700x.h b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
new file mode 100644
index 000000000000..d18a3053be0d
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/at32ap700x.h
@@ -0,0 +1,49 @@
+/*
+ * Pin definitions for AT32AP7000.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_AT32AP700X_H__
+#define __ASM_ARCH_AT32AP700X_H__
+
+#define GPIO_PERIPH_A	0
+#define GPIO_PERIPH_B	1
+
+/*
+ * Pin numbers identifying specific GPIO pins on the chip. They can
+ * also be converted to IRQ numbers by passing them through
+ * gpio_to_irq().
+ */
+#define GPIO_PIOA_BASE	(0)
+#define GPIO_PIOB_BASE	(GPIO_PIOA_BASE + 32)
+#define GPIO_PIOC_BASE	(GPIO_PIOB_BASE + 32)
+#define GPIO_PIOD_BASE	(GPIO_PIOC_BASE + 32)
+#define GPIO_PIOE_BASE	(GPIO_PIOD_BASE + 32)
+
+#define GPIO_PIN_PA(N)	(GPIO_PIOA_BASE + (N))
+#define GPIO_PIN_PB(N)	(GPIO_PIOB_BASE + (N))
+#define GPIO_PIN_PC(N)	(GPIO_PIOC_BASE + (N))
+#define GPIO_PIN_PD(N)	(GPIO_PIOD_BASE + (N))
+#define GPIO_PIN_PE(N)	(GPIO_PIOE_BASE + (N))
+
+
+/*
+ * DMAC peripheral hardware handshaking interfaces, used with dw_dmac
+ */
+#define DMAC_MCI_RX		0
+#define DMAC_MCI_TX		1
+#define DMAC_DAC_TX		2
+#define DMAC_AC97_A_RX		3
+#define DMAC_AC97_A_TX		4
+#define DMAC_AC97_B_RX		5
+#define DMAC_AC97_B_TX		6
+#define DMAC_DMAREQ_0		7
+#define DMAC_DMAREQ_1		8
+#define DMAC_DMAREQ_2		9
+#define DMAC_DMAREQ_3		10
+
+#endif /* __ASM_ARCH_AT32AP700X_H__ */
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
new file mode 100644
index 000000000000..e60e9076544d
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -0,0 +1,121 @@
+/*
+ * Platform data definitions.
+ */
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <linux/types.h>
+
+#define GPIO_PIN_NONE	(-1)
+
+/*
+ * Clock rates for various on-board oscillators. The number of entries
+ * in this array is chip-dependent.
+ */
+extern unsigned long at32_board_osc_rates[];
+  
+/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
+void at32_add_system_devices(void);
+
+#define ATMEL_MAX_UART	4
+extern struct platform_device *atmel_default_console_device;
+
+struct atmel_uart_data {
+	short		use_dma_tx;	/* use transmit DMA? */
+	short		use_dma_rx;	/* use receive DMA? */
+	void __iomem	*regs;		/* virtual base address, if any */
+};
+void at32_map_usart(unsigned int hw_id, unsigned int line);
+struct platform_device *at32_add_device_usart(unsigned int id);
+
+struct eth_platform_data {
+	u32	phy_mask;
+	u8	is_rmii;
+};
+struct platform_device *
+at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
+
+struct spi_board_info;
+struct platform_device *
+at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
+
+struct atmel_lcdfb_info;
+struct platform_device *
+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+		     unsigned long fbmem_start, unsigned long fbmem_len,
+		     unsigned int pin_config);
+
+struct usba_platform_data;
+struct platform_device *
+at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
+
+struct ide_platform_data {
+	u8      cs;
+};
+struct platform_device *
+at32_add_device_ide(unsigned int id, unsigned int extint,
+		    struct ide_platform_data *data);
+
+/* mask says which PWM channels to mux */
+struct platform_device *at32_add_device_pwm(u32 mask);
+
+/* depending on what's hooked up, not all SSC pins will be used */
+#define	ATMEL_SSC_TK		0x01
+#define	ATMEL_SSC_TF		0x02
+#define	ATMEL_SSC_TD		0x04
+#define	ATMEL_SSC_TX		(ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
+
+#define	ATMEL_SSC_RK		0x10
+#define	ATMEL_SSC_RF		0x20
+#define	ATMEL_SSC_RD		0x40
+#define	ATMEL_SSC_RX		(ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
+
+struct platform_device *
+at32_add_device_ssc(unsigned int id, unsigned int flags);
+
+struct i2c_board_info;
+struct platform_device *at32_add_device_twi(unsigned int id,
+					    struct i2c_board_info *b,
+					    unsigned int n);
+
+struct mci_platform_data;
+struct platform_device *
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
+
+struct ac97c_platform_data {
+	unsigned short dma_rx_periph_id;
+	unsigned short dma_tx_periph_id;
+	unsigned short dma_controller_id;
+	int reset_pin;
+};
+struct platform_device *
+at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data);
+
+struct platform_device *at32_add_device_abdac(unsigned int id);
+struct platform_device *at32_add_device_psif(unsigned int id);
+
+struct cf_platform_data {
+	int	detect_pin;
+	int	reset_pin;
+	int	vcc_pin;
+	int	ready_pin;
+	u8	cs;
+};
+struct platform_device *
+at32_add_device_cf(unsigned int id, unsigned int extint,
+		struct cf_platform_data *data);
+
+/* NAND / SmartMedia */
+struct atmel_nand_data {
+	int	enable_pin;	/* chip enable */
+	int	det_pin;	/* card detect */
+	int	rdy_pin;	/* ready/busy */
+	u8	ale;		/* address line number connected to ALE */
+	u8	cle;		/* address line number connected to CLE */
+	u8	bus_width_16;	/* buswidth is 16 bit */
+	struct mtd_partition *(*partition_info)(int size, int *num_partitions);
+};
+struct platform_device *
+at32_add_device_nand(unsigned int id, struct atmel_nand_data *data);
+
+#endif /* __ASM_ARCH_BOARD_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/cpu.h b/arch/avr32/mach-at32ap/include/mach/cpu.h
new file mode 100644
index 000000000000..44d0bfa1f409
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/cpu.h
@@ -0,0 +1,35 @@
+/*
+ * AVR32 and (fake) AT91 CPU identification
+ *
+ * Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_CPU_H
+#define __ASM_ARCH_CPU_H
+
+/*
+ * Only AT32AP7000 is defined for now. We can identify the specific
+ * chip at runtime, but I'm not sure if it's really worth it.
+ */
+#ifdef CONFIG_CPU_AT32AP700X
+# define cpu_is_at32ap7000()	(1)
+#else
+# define cpu_is_at32ap7000()	(0)
+#endif
+
+/*
+ * Since this is AVR32, we will never run on any AT91 CPU. But these
+ * definitions may reduce clutter in common drivers.
+ */
+#define cpu_is_at91rm9200()	(0)
+#define cpu_is_at91sam9xe()	(0)
+#define cpu_is_at91sam9260()	(0)
+#define cpu_is_at91sam9261()	(0)
+#define cpu_is_at91sam9263()	(0)
+#define cpu_is_at91sam9rl()	(0)
+#define cpu_is_at91cap9()	(0)
+
+#endif /* __ASM_ARCH_CPU_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/gpio.h b/arch/avr32/mach-at32ap/include/mach/gpio.h
new file mode 100644
index 000000000000..0180f584ef03
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/gpio.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_AVR32_ARCH_GPIO_H
+#define __ASM_AVR32_ARCH_GPIO_H
+
+#include <linux/compiler.h>
+#include <asm/irq.h>
+
+
+/* Some GPIO chips can manage IRQs; some can't.  The exact numbers can
+ * be changed if needed, but for the moment they're not configurable.
+ */
+#define ARCH_NR_GPIOS	(NR_GPIO_IRQS + 2 * 32)
+
+
+/* Arch-neutral GPIO API, supporting both "native" and external GPIOs. */
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	if (gpio < NR_GPIO_IRQS)
+		return gpio + GPIO_IRQ_BASE;
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return irq - GPIO_IRQ_BASE;
+}
+
+#endif /* __ASM_AVR32_ARCH_GPIO_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/init.h b/arch/avr32/mach-at32ap/include/mach/init.h
new file mode 100644
index 000000000000..bc40e3d46150
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/init.h
@@ -0,0 +1,18 @@
+/*
+ * AT32AP platform initialization calls.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_AT32AP_INIT_H__
+#define __ASM_AVR32_AT32AP_INIT_H__
+
+void setup_platform(void);
+void setup_board(void);
+
+void at32_setup_serial_console(unsigned int usart_id);
+
+#endif /* __ASM_AVR32_AT32AP_INIT_H__ */
diff --git a/arch/avr32/mach-at32ap/include/mach/io.h b/arch/avr32/mach-at32ap/include/mach/io.h
new file mode 100644
index 000000000000..4ec6abc68ea3
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/io.h
@@ -0,0 +1,39 @@
+#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
+#define __ASM_AVR32_ARCH_AT32AP_IO_H
+
+/* For "bizarre" halfword swapping */
+#include <linux/byteorder/swabb.h>
+
+#if defined(CONFIG_AP700X_32_BIT_SMC)
+# define __swizzle_addr_b(addr)	(addr ^ 3UL)
+# define __swizzle_addr_w(addr)	(addr ^ 2UL)
+# define __swizzle_addr_l(addr)	(addr)
+# define ioswabb(a, x)		(x)
+# define ioswabw(a, x)		(x)
+# define ioswabl(a, x)		(x)
+# define __mem_ioswabb(a, x)	(x)
+# define __mem_ioswabw(a, x)	swab16(x)
+# define __mem_ioswabl(a, x)	swab32(x)
+#elif defined(CONFIG_AP700X_16_BIT_SMC)
+# define __swizzle_addr_b(addr)	(addr ^ 1UL)
+# define __swizzle_addr_w(addr)	(addr)
+# define __swizzle_addr_l(addr)	(addr)
+# define ioswabb(a, x)		(x)
+# define ioswabw(a, x)		(x)
+# define ioswabl(a, x)		swahw32(x)
+# define __mem_ioswabb(a, x)	(x)
+# define __mem_ioswabw(a, x)	swab16(x)
+# define __mem_ioswabl(a, x)	swahb32(x)
+#else
+# define __swizzle_addr_b(addr)	(addr)
+# define __swizzle_addr_w(addr)	(addr)
+# define __swizzle_addr_l(addr)	(addr)
+# define ioswabb(a, x)		(x)
+# define ioswabw(a, x)		swab16(x)
+# define ioswabl(a, x)		swab32(x)
+# define __mem_ioswabb(a, x)	(x)
+# define __mem_ioswabw(a, x)	(x)
+# define __mem_ioswabl(a, x)	(x)
+#endif
+
+#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/irq.h b/arch/avr32/mach-at32ap/include/mach/irq.h
new file mode 100644
index 000000000000..608e350368c7
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/irq.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_AVR32_ARCH_IRQ_H
+#define __ASM_AVR32_ARCH_IRQ_H
+
+#define EIM_IRQ_BASE	NR_INTERNAL_IRQS
+#define NR_EIM_IRQS	32
+#define AT32_EXTINT(n)	(EIM_IRQ_BASE + (n))
+
+#define GPIO_IRQ_BASE	(EIM_IRQ_BASE + NR_EIM_IRQS)
+#define NR_GPIO_CTLR	(5 /*internal*/ + 1 /*external*/)
+#define NR_GPIO_IRQS	(NR_GPIO_CTLR * 32)
+
+#define NR_IRQS		(GPIO_IRQ_BASE + NR_GPIO_IRQS)
+
+#endif /* __ASM_AVR32_ARCH_IRQ_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/pm.h b/arch/avr32/mach-at32ap/include/mach/pm.h
new file mode 100644
index 000000000000..979b355b77b6
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/pm.h
@@ -0,0 +1,51 @@
+/*
+ * AVR32 AP Power Management.
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ARCH_PM_H
+#define __ASM_AVR32_ARCH_PM_H
+
+/* Possible arguments to the "sleep" instruction */
+#define CPU_SLEEP_IDLE		0
+#define CPU_SLEEP_FROZEN	1
+#define CPU_SLEEP_STANDBY	2
+#define CPU_SLEEP_STOP		3
+#define CPU_SLEEP_STATIC	5
+
+#ifndef __ASSEMBLY__
+extern void cpu_enter_idle(void);
+extern void cpu_enter_standby(unsigned long sdramc_base);
+
+extern bool disable_idle_sleep;
+
+static inline void cpu_disable_idle_sleep(void)
+{
+	disable_idle_sleep = true;
+}
+
+static inline void cpu_enable_idle_sleep(void)
+{
+	disable_idle_sleep = false;
+}
+
+static inline void cpu_idle_sleep(void)
+{
+	/*
+	 * If we're using the COUNT and COMPARE registers for
+	 * timekeeping, we can't use the IDLE state.
+	 */
+	if (disable_idle_sleep)
+		cpu_relax();
+	else
+		cpu_enter_idle();
+}
+
+void intc_set_suspend_handler(unsigned long offset);
+#endif
+
+#endif /* __ASM_AVR32_ARCH_PM_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/portmux.h b/arch/avr32/mach-at32ap/include/mach/portmux.h
new file mode 100644
index 000000000000..b1abe6b4e4ef
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/portmux.h
@@ -0,0 +1,29 @@
+/*
+ * AT32 portmux interface.
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_PORTMUX_H__
+#define __ASM_ARCH_PORTMUX_H__
+
+/*
+ * Set up pin multiplexing, called from board init only.
+ *
+ * The following flags determine the initial state of the pin.
+ */
+#define AT32_GPIOF_PULLUP	0x00000001	/* (not-OUT) Enable pull-up */
+#define AT32_GPIOF_OUTPUT	0x00000002	/* (OUT) Enable output driver */
+#define AT32_GPIOF_HIGH		0x00000004	/* (OUT) Set output high */
+#define AT32_GPIOF_DEGLITCH	0x00000008	/* (IN) Filter glitches */
+#define AT32_GPIOF_MULTIDRV	0x00000010	/* Enable multidriver option */
+
+void at32_select_periph(unsigned int pin, unsigned int periph,
+			unsigned long flags);
+void at32_select_gpio(unsigned int pin, unsigned long flags);
+void at32_reserve_pin(unsigned int pin);
+
+#endif /* __ASM_ARCH_PORTMUX_H__ */
diff --git a/arch/avr32/mach-at32ap/include/mach/smc.h b/arch/avr32/mach-at32ap/include/mach/smc.h
new file mode 100644
index 000000000000..c98eea44a70a
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/smc.h
@@ -0,0 +1,113 @@
+/*
+ * Static Memory Controller for AT32 chips
+ *
+ * Copyright (C) 2006 Atmel Corporation
+ *
+ * Inspired by the OMAP2 General-Purpose Memory Controller interface
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_AT32AP_SMC_H
+#define __ARCH_AT32AP_SMC_H
+
+/*
+ * All timing parameters are in nanoseconds.
+ */
+struct smc_timing {
+	/* Delay from address valid to assertion of given strobe */
+	int ncs_read_setup;
+	int nrd_setup;
+	int ncs_write_setup;
+	int nwe_setup;
+
+	/* Pulse length of given strobe */
+	int ncs_read_pulse;
+	int nrd_pulse;
+	int ncs_write_pulse;
+	int nwe_pulse;
+
+	/* Total cycle length of given operation */
+	int read_cycle;
+	int write_cycle;
+
+	/* Minimal recovery times, will extend cycle if needed */
+	int ncs_read_recover;
+	int nrd_recover;
+	int ncs_write_recover;
+	int nwe_recover;
+};
+
+/*
+ * All timing parameters are in clock cycles.
+ */
+struct smc_config {
+
+	/* Delay from address valid to assertion of given strobe */
+	u8		ncs_read_setup;
+	u8		nrd_setup;
+	u8		ncs_write_setup;
+	u8		nwe_setup;
+
+	/* Pulse length of given strobe */
+	u8		ncs_read_pulse;
+	u8		nrd_pulse;
+	u8		ncs_write_pulse;
+	u8		nwe_pulse;
+
+	/* Total cycle length of given operation */
+	u8		read_cycle;
+	u8		write_cycle;
+
+	/* Bus width in bytes */
+	u8		bus_width;
+
+	/*
+	 * 0: Data is sampled on rising edge of NCS
+	 * 1: Data is sampled on rising edge of NRD
+	 */
+	unsigned int	nrd_controlled:1;
+
+	/*
+	 * 0: Data is driven on falling edge of NCS
+	 * 1: Data is driven on falling edge of NWR
+	 */
+	unsigned int	nwe_controlled:1;
+
+	/*
+	 * 0: NWAIT is disabled
+	 * 1: Reserved
+	 * 2: NWAIT is frozen mode
+	 * 3: NWAIT in ready mode
+	 */
+	unsigned int	nwait_mode:2;
+
+	/*
+	 * 0: Byte select access type
+	 * 1: Byte write access type
+	 */
+	unsigned int	byte_write:1;
+
+	/*
+	 * Number of clock cycles before data is released after
+	 * the rising edge of the read controlling signal
+	 *
+	 * Total cycles from SMC is tdf_cycles + 1
+	 */
+	unsigned int	tdf_cycles:4;
+
+	/*
+	 * 0: TDF optimization disabled
+	 * 1: TDF optimization enabled
+	 */
+	unsigned int	tdf_mode:1;
+};
+
+extern void smc_set_timing(struct smc_config *config,
+			   const struct smc_timing *timing);
+
+extern int smc_set_configuration(int cs, const struct smc_config *config);
+extern struct smc_config *smc_get_configuration(int cs);
+
+#endif /* __ARCH_AT32AP_SMC_H */
diff --git a/arch/avr32/mach-at32ap/include/mach/sram.h b/arch/avr32/mach-at32ap/include/mach/sram.h
new file mode 100644
index 000000000000..4838dae7601a
--- /dev/null
+++ b/arch/avr32/mach-at32ap/include/mach/sram.h
@@ -0,0 +1,30 @@
+/*
+ * Simple SRAM allocator
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_AVR32_ARCH_SRAM_H
+#define __ASM_AVR32_ARCH_SRAM_H
+
+#include <linux/genalloc.h>
+
+extern struct gen_pool *sram_pool;
+
+static inline unsigned long sram_alloc(size_t len)
+{
+	if (!sram_pool)
+		return 0UL;
+
+	return gen_pool_alloc(sram_pool, len);
+}
+
+static inline void sram_free(unsigned long addr, size_t len)
+{
+	return gen_pool_free(sram_pool, addr, len);
+}
+
+#endif /* __ASM_AVR32_ARCH_SRAM_H */
diff --git a/arch/avr32/mach-at32ap/pio.c b/arch/avr32/mach-at32ap/pio.c
index 60da03ba7117..405ee6bad4ce 100644
--- a/arch/avr32/mach-at32ap/pio.c
+++ b/arch/avr32/mach-at32ap/pio.c
@@ -17,7 +17,7 @@
 #include <asm/gpio.h>
 #include <asm/io.h>
 
-#include <asm/arch/portmux.h>
+#include <mach/portmux.h>
 
 #include "pio.h"
 
@@ -360,6 +360,8 @@ static int __init pio_probe(struct platform_device *pdev)
 	pio->chip.label = pio->name;
 	pio->chip.base = pdev->id * 32;
 	pio->chip.ngpio = 32;
+	pio->chip.dev = &pdev->dev;
+	pio->chip.owner = THIS_MODULE;
 
 	pio->chip.direction_input = direction_input;
 	pio->chip.get = gpio_get;
diff --git a/arch/avr32/mach-at32ap/pm-at32ap700x.S b/arch/avr32/mach-at32ap/pm-at32ap700x.S
index 0a53ad314ff4..5be4de65b209 100644
--- a/arch/avr32/mach-at32ap/pm-at32ap700x.S
+++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S
@@ -10,7 +10,7 @@
 #include <asm/asm.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
-#include <asm/arch/pm.h>
+#include <mach/pm.h>
 
 #include "pm.h"
 #include "sdramc.h"
diff --git a/arch/avr32/mach-at32ap/pm.c b/arch/avr32/mach-at32ap/pm.c
index 0b764320135d..a0cbef54fc2a 100644
--- a/arch/avr32/mach-at32ap/pm.c
+++ b/arch/avr32/mach-at32ap/pm.c
@@ -14,8 +14,8 @@
 #include <asm/cacheflush.h>
 #include <asm/sysreg.h>
 
-#include <asm/arch/pm.h>
-#include <asm/arch/sram.h>
+#include <mach/pm.h>
+#include <mach/sram.h>
 
 /* FIXME: This is only valid for AP7000 */
 #define SDRAMC_BASE	0xfff03800
diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c
index 3f90a87527bb..fa92ff6d95f7 100644
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -38,45 +38,6 @@ EXPORT_SYMBOL(empty_zero_page);
  */
 unsigned long mmu_context_cache = NO_CONTEXT;
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0, cached = 0;
-	int slab = 0, free = 0, shared = 0;
-	pg_data_t *pgdat;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-
-	for_each_online_pgdat(pgdat) {
-		struct page *page, *end;
-
-		page = pgdat->node_mem_map;
-		end = page + pgdat->node_spanned_pages;
-
-		do {
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (PageSlab(page))
-				slab++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-			page++;
-		} while (page < end);
-	}
-
-	printk ("%d pages of RAM\n", total);
-	printk ("%d free pages\n", free);
-	printk ("%d reserved pages\n", reserved);
-	printk ("%d slab pages\n", slab);
-	printk ("%d pages shared\n", shared);
-	printk ("%d pages swap cached\n", cached);
-}
-
 /*
  * paging_init() sets up the page tables
  *
@@ -119,8 +80,7 @@ void __init paging_init(void)
 		unsigned long zones_size[MAX_NR_ZONES];
 		unsigned long low, start_pfn;
 
-		start_pfn = pgdat->bdata->node_boot_start;
-		start_pfn >>= PAGE_SHIFT;
+		start_pfn = pgdat->bdata->node_min_pfn;
 		low = pgdat->bdata->node_low_pfn;
 
 		memset(zones_size, 0, sizeof(zones_size));
@@ -129,7 +89,7 @@ void __init paging_init(void)
 		printk("Node %u: start_pfn = 0x%lx, low = 0x%lx\n",
 		       nid, start_pfn, low);
 
-		free_area_init_node(nid, pgdat, zones_size, start_pfn, NULL);
+		free_area_init_node(nid, zones_size, start_pfn, NULL);
 
 		printk("Node %u: mem_map starts at %p\n",
 		       pgdat->node_id, pgdat->node_mem_map);
diff --git a/arch/avr32/mm/ioremap.c b/arch/avr32/mm/ioremap.c
index 3437c82434ac..f03b79f0e0ab 100644
--- a/arch/avr32/mm/ioremap.c
+++ b/arch/avr32/mm/ioremap.c
@@ -6,6 +6,7 @@
  * published by the Free Software Foundation.
  */
 #include <linux/vmalloc.h>
+#include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/io.h>
 
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index b87634e75f20..5a097c46bc46 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -234,7 +234,7 @@ config MEM_MT48LC16M16A2TG_75
 	bool
 	depends on (BFIN533_EZKIT || BFIN561_EZKIT \
 		|| BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \
-		|| H8606_HVSISTEMAS)
+		|| H8606_HVSISTEMAS || BFIN527_BLUETECHNIX_CM)
 	default y
 
 config MEM_MT48LC32M8A2_75
@@ -310,25 +310,6 @@ config BFIN_KERNEL_CLOCK
 	  are also not changed, and the Bootloader does 100% of the hardware
 	  configuration.
 
-config MEM_SIZE
-	int "SDRAM Memory Size in MBytes"
-	depends on BFIN_KERNEL_CLOCK
-	default 64
-
-config MEM_ADD_WIDTH
-	int "Memory Address Width"
-	depends on BFIN_KERNEL_CLOCK
-	depends on (!BF54x)
-	range 8 11
-	default  9 if BFIN533_EZKIT
-	default  9 if BFIN561_EZKIT
-	default  9 if H8606_HVSISTEMAS
-	default 10 if BFIN527_EZKIT
-	default 10 if BFIN537_STAMP
-	default 11 if BFIN533_STAMP
-	default 10 if PNAV10
-	default 10 if BFIN532_IP0X
-
 config PLL_BYPASS
 	bool "Bypass PLL"
 	depends on BFIN_KERNEL_CLOCK
@@ -349,8 +330,7 @@ config VCO_MULT
 	default "45" if BFIN533_STAMP
 	default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM)
 	default "22" if BFIN533_BLUETECHNIX_CM
-	default "20" if BFIN537_BLUETECHNIX_CM
-	default "20" if BFIN561_BLUETECHNIX_CM
+	default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM)
 	default "20" if BFIN561_EZKIT
 	default "16" if H8606_HVSISTEMAS
 	help
@@ -390,7 +370,7 @@ config SCLK_DIV
 
 config MAX_MEM_SIZE
 	int "Max SDRAM Memory Size in MBytes"
-	depends on !BFIN_KERNEL_CLOCK && !MPU
+	depends on !MPU
 	default 512
 	help
 	  This is the max memory size that the kernel will create CPLB
@@ -748,14 +728,6 @@ config BFIN_WT
 
 endchoice
 
-config L1_MAX_PIECE
-	int "Set the max L1 SRAM pieces"
-	default 16
-	help
-	  Set the max memory pieces for the L1 SRAM allocation algorithm.
-	  Min value is 16. Max value is 1024.
-
-
 config MPU
 	bool "Enable the memory protection unit (EXPERIMENTAL)"
 	default n
@@ -873,8 +845,8 @@ config HOTPLUG
 	  plugged into slots found on all modern laptop computers.  Another
 	  example, used on modern desktops as well as laptops, is USB.
 
-	  Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
-	  software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+	  Enable HOTPLUG and build a modular kernel.  Get agent software
+	  (from <http://linux-hotplug.sourceforge.net/>) and install it.
 	  Then your kernel will automatically call out to a user mode "policy
 	  agent" (/sbin/hotplug) to load modules and set up software needed
 	  to use devices as you hotplug them.
@@ -899,7 +871,7 @@ config ARCH_SUSPEND_POSSIBLE
 	depends on !SMP
 
 choice
-	prompt "Default Power Saving Mode"
+	prompt "Standby Power Saving Mode"
 	depends on PM
 	default PM_BFIN_SLEEP_DEEPER
 config  PM_BFIN_SLEEP_DEEPER
@@ -918,6 +890,8 @@ config  PM_BFIN_SLEEP_DEEPER
 	  normal during Sleep Deeper, due to the reduced SCLK frequency.
 	  When in the sleep mode, system DMA access to L1 memory is not supported.
 
+	  If unsure, select "Sleep Deeper".
+
 config  PM_BFIN_SLEEP
 	bool "Sleep"
 	help
@@ -925,15 +899,17 @@ config  PM_BFIN_SLEEP
 	  dissipation by disabling the clock to the processor core (CCLK).
 	  The PLL and system clock (SCLK), however, continue to operate in
 	  this mode. Typically an external event or RTC activity will wake
-	  up the processor. When in the sleep mode,
-	  system DMA access to L1 memory is not supported.
+	  up the processor. When in the sleep mode, system DMA access to L1
+	  memory is not supported.
+
+	  If unsure, select "Sleep Deeper".
 endchoice
 
 config PM_WAKEUP_BY_GPIO
-	bool "Cause Wakeup Event by GPIO"
+	bool "Allow Wakeup from Standby by GPIO"
 
 config PM_WAKEUP_GPIO_NUMBER
-	int "Wakeup GPIO number"
+	int "GPIO number"
 	range 0 47
 	depends on PM_WAKEUP_BY_GPIO
 	default 2 if BFIN537_STAMP
@@ -954,6 +930,58 @@ config  PM_WAKEUP_GPIO_POLAR_EDGE_B
 	bool "Both EDGE"
 endchoice
 
+comment "Possible Suspend Mem / Hibernate Wake-Up Sources"
+	depends on PM
+
+config PM_BFIN_WAKE_RTC
+	bool "Allow Wake-Up from RESET and on-chip RTC"
+	depends on PM
+	default n
+	help
+	  Enable RTC Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_PH6
+	bool "Allow Wake-Up from on-chip PHY or PH6 GP"
+	depends on PM && (BF52x || BF534 || BF536 || BF537)
+	default n
+	help
+	  Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_CAN
+	bool "Allow Wake-Up from on-chip CAN0/1"
+	depends on PM && (BF54x || BF534 || BF536 || BF537)
+	default n
+	help
+	  Enable CAN0/1 Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_GP
+	bool "Allow Wake-Up from GPIOs"
+	depends on PM && BF54x
+	default n
+	help
+	  Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_USB
+	bool "Allow Wake-Up from on-chip USB"
+	depends on PM && (BF54x || BF52x)
+	default n
+	help
+	  Enable USB Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_KEYPAD
+	bool "Allow Wake-Up from on-chip Keypad"
+	depends on PM && BF54x
+	default n
+	help
+	  Enable Keypad Wake-Up (Voltage Regulator Power-Up)
+
+config PM_BFIN_WAKE_ROTARY
+	bool "Allow Wake-Up from on-chip Rotary"
+	depends on PM && BF54x
+	default n
+	help
+	  Enable Rotary Wake-Up (Voltage Regulator Power-Up)
+
 endmenu
 
 menu "CPU Frequency scaling"
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index c61bdebb9974..c468624d55f0 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -154,13 +154,6 @@ config EARLY_PRINTK
 	  all of this lives in the init section and is thrown away after the
 	  kernel boots completely.
 
-config DUAL_CORE_TEST_MODULE
-	tristate "Dual Core Test Module"
-	depends on (BF561)
-	default n
-	help
-	  Say Y here to build-in dual core test module for dual core test.
-
 config CPLB_INFO
 	bool "Display the CPLB information"
 	help
diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile
index 3cbe16caad4b..9564731ad3a8 100644
--- a/arch/blackfin/Makefile
+++ b/arch/blackfin/Makefile
@@ -6,8 +6,9 @@
 # for more details.
 #
 
-
-CROSS_COMPILE    ?= bfin-uclinux-
+ifeq ($(CROSS_COMPILE),)
+CROSS_COMPILE    := bfin-uclinux-
+endif
 LDFLAGS_vmlinux  := -X
 OBJCOPYFLAGS     := -O binary -R .note -R .comment -S
 GZFLAGS          := -9
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 5e6fb9d8e50f..66854a83c0de 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,7 +1,6 @@
 #
 # Automatically generated make config: don't edit
 # Linux kernel version: 2.6.24.7
-# Fri May 16 10:02:29 2008
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -290,7 +289,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_BFIN_GPTIMERS is not set
+CONFIG_BFIN_GPTIMERS=y
 CONFIG_BFIN_DMA_5XX=y
 # CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
@@ -430,7 +429,58 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR0=y
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 
@@ -689,8 +739,11 @@ CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_VT is not set
+CONFIG_SIMPLE_GPIO=m
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -872,8 +925,36 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_BFIN_T350MCQB=y
+# CONFIG_FB_BFIN_7393 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_LCD_LTV350QV=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_CORGI is not set
 
 #
 # Display device support
@@ -881,9 +962,99 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DISPLAY_SUPPORT is not set
 
 #
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_BLACKFIN_VGA16 is not set
+CONFIG_LOGO_BLACKFIN_CLUT224=y
+
+#
 # Sound
 #
-# CONFIG_SOUND is not set
+CONFIG_SOUND=m
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# SPI devices
+#
+
+#
+# ALSA Blackfin devices
+#
+# CONFIG_SND_BLACKFIN_AD1836 is not set
+# CONFIG_SND_BLACKFIN_AD1836_TDM is not set
+# CONFIG_SND_BLACKFIN_AD1836_I2S is not set
+# CONFIG_SND_BLACKFIN_AD1836_MULSUB is not set
+# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set
+# CONFIG_SND_BFIN_AD73311 is not set
+# CONFIG_SND_BFIN_AD73322 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC=m
+CONFIG_SND_BF5XX_SOC=m
+CONFIG_SND_MMAP_SUPPORT=y
+CONFIG_SND_BF5XX_SOC_I2S=m
+CONFIG_SND_BF5XX_SOC_AC97=m
+# CONFIG_SND_BF5XX_SOC_WM8750 is not set
+# CONFIG_SND_BF5XX_SOC_WM8731 is not set
+CONFIG_SND_BF5XX_SOC_SSM2602=m
+CONFIG_SND_BF5XX_SOC_BF5xx=m
+CONFIG_SND_BF5XX_SPORT_NUM=0
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_SSM2602=m
+# CONFIG_SND_SOC_SSM2602_SPI is not set
+CONFIG_SND_SOC_AD1980=m
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 8d817ba01945..6bc11db12690 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,12 +132,12 @@ CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC16M16A2TG_75=y
 CONFIG_BFIN533_EZKIT=y
 # CONFIG_BFIN533_STAMP is not set
 # CONFIG_BFIN533_BLUETECHNIX_CM is not set
 # CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_BFIN532_IP0X is not set
 # CONFIG_GENERIC_BF533_BOARD is not set
 
 #
@@ -189,12 +180,14 @@ CONFIG_WDTIMER=13
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=27000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=750000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -208,13 +201,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -250,12 +247,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -293,17 +292,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xAAC3
+CONFIG_BANK_3=0xAAC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -321,7 +316,9 @@ CONFIG_BINFMT_ZFLAT=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
@@ -367,6 +364,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -393,10 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -428,6 +422,7 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+# CONFIG_BFIN_SIR is not set
 
 #
 # Dongle support
@@ -457,6 +452,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -465,14 +461,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -492,6 +485,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -548,20 +542,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -571,10 +553,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -582,32 +562,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -624,15 +601,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -647,7 +616,6 @@ CONFIG_INPUT=m
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -672,13 +640,12 @@ CONFIG_INPUT_EVDEV=m
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -706,28 +673,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
@@ -748,22 +698,37 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -780,72 +745,27 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -862,10 +782,6 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_TEST is not set
 
 #
-# I2C RTC drivers
-#
-
-#
 # SPI RTC drivers
 #
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -875,8 +791,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -885,22 +803,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
+# Userspace I/O
 #
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -945,7 +850,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -971,10 +875,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -983,10 +889,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1006,17 +909,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1057,21 +955,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1079,6 +972,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1098,11 +992,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1113,6 +1003,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 20d598d17bd1..d77d991a1f61 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,12 +132,12 @@ CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC64M4A2FB_7E=y
 # CONFIG_BFIN533_EZKIT is not set
 CONFIG_BFIN533_STAMP=y
 # CONFIG_BFIN533_BLUETECHNIX_CM is not set
 # CONFIG_H8606_HVSISTEMAS is not set
+# CONFIG_BFIN532_IP0X is not set
 # CONFIG_GENERIC_BF533_BOARD is not set
 
 #
@@ -189,12 +180,14 @@ CONFIG_WDTIMER=13
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=11059200
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=750000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -208,14 +201,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=11
-CONFIG_ENET_FLASH_PIN=0
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -251,12 +247,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -294,17 +292,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xAAC3
+CONFIG_BANK_3=0xAAC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -322,7 +316,9 @@ CONFIG_BINFMT_ZFLAT=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
@@ -368,6 +364,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -394,10 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -429,6 +422,9 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
 
 #
 # Dongle support
@@ -458,6 +454,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -466,14 +463,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -493,6 +487,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -524,11 +519,7 @@ CONFIG_MTD_ROM=m
 #
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 # CONFIG_MTD_PHYSMAP is not set
-CONFIG_MTD_BF5xx=m
-CONFIG_BFIN_FLASH_BANK_0=0x7BB0
-CONFIG_BFIN_FLASH_BANK_1=0x7BB0
-CONFIG_BFIN_FLASH_BANK_2=0x7BB0
-CONFIG_BFIN_FLASH_BANK_3=0x7BB0
+CONFIG_MTD_BFIN_ASYNC=m
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -555,20 +546,8 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -578,10 +557,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -589,32 +566,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -631,15 +605,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -654,7 +620,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -667,14 +632,8 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
 CONFIG_TWI_KEYPAD=m
-CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
 
 #
 # Hardware I/O ports
@@ -687,15 +646,13 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
 CONFIG_TWI_LCD=m
-CONFIG_TWI_LCD_SLAVE_ADDR=34
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -723,28 +680,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
@@ -764,6 +704,7 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
 
 #
@@ -771,14 +712,15 @@ CONFIG_I2C_ALGOBIT=m
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_AD5252 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -801,14 +743,11 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -816,12 +755,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -836,13 +775,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -852,6 +794,20 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -863,24 +819,20 @@ CONFIG_HWMON=y
 #
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=m
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -895,7 +847,7 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # Frame buffer hardware drivers
 #
-CONFIG_FB_BFIN_7171=m
+# CONFIG_FB_BFIN_T350MCQB is not set
 CONFIG_FB_BFIN_7393=m
 CONFIG_NTSC=y
 # CONFIG_PAL is not set
@@ -905,9 +857,14 @@ CONFIG_NTSC=y
 # CONFIG_PAL_YCBCR is not set
 CONFIG_ADV7393_1XMEM=y
 # CONFIG_ADV7393_2XMEM is not set
-# CONFIG_FB_BFIN_T350MCQB is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
 
 #
@@ -941,6 +898,10 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_MPU401 is not set
 
 #
+# SPI devices
+#
+
+#
 # ALSA Blackfin devices
 #
 CONFIG_SND_BLACKFIN_AD1836=m
@@ -953,69 +914,43 @@ CONFIG_SND_BLACKFIN_SPI_PFBIT=4
 CONFIG_SND_BFIN_AD73311=m
 CONFIG_SND_BFIN_SPORT=0
 CONFIG_SND_BFIN_AD73311_SE=4
+CONFIG_SND_BFIN_AD73322=m
+CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
+CONFIG_SND_BFIN_AD73322_SPORT1_SE=14
+CONFIG_SND_BFIN_AD73322_RESET=12
 
 #
 # System on Chip audio support
 #
-# CONFIG_SND_SOC is not set
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_SOC=m
+CONFIG_SND_BF5XX_SOC=m
+CONFIG_SND_MMAP_SUPPORT=y
+CONFIG_SND_BF5XX_SOC_AC97=m
+# CONFIG_SND_BF5XX_SOC_WM8750 is not set
+# CONFIG_SND_BF5XX_SOC_WM8731 is not set
+# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
+CONFIG_SND_BF5XX_SOC_BF5xx=m
+CONFIG_SND_BF5XX_SPORT_NUM=0
+# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
 
 #
-# Open Sound System
+# SoC Audio support for SuperH
 #
-# CONFIG_SOUND_PRIME is not set
+CONFIG_SND_SOC_AD1980=m
 
 #
-# HID Devices
+# Open Sound System
 #
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1035,6 +970,7 @@ CONFIG_RTC_INTF_DEV=y
 # I2C RTC drivers
 #
 # CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
@@ -1042,6 +978,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
 
 #
 # SPI RTC drivers
@@ -1053,8 +990,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1063,22 +1002,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
+# Userspace I/O
 #
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1123,7 +1049,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1149,10 +1074,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -1161,10 +1088,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1184,17 +1108,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1235,21 +1154,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1257,6 +1171,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1276,11 +1191,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1291,6 +1202,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index b5189c8ba263..5fd7c4b143df 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -141,7 +132,6 @@ CONFIG_BF_REV_0_2=y
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
 CONFIG_BF53x=y
-CONFIG_BFIN_SINGLE_CORE=y
 CONFIG_MEM_MT48LC32M8A2_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_RTC=8
@@ -197,12 +187,14 @@ CONFIG_IRQ_PROG_INTA=12
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=25000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -216,13 +208,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=10
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -258,12 +254,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -301,17 +299,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -329,7 +323,9 @@ CONFIG_BINFMT_ZFLAT=y
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND_UP_POSSIBLE=y
+CONFIG_SUSPEND=y
 CONFIG_PM_BFIN_SLEEP_DEEPER=y
 # CONFIG_PM_BFIN_SLEEP is not set
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
@@ -375,6 +371,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -401,10 +398,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -436,6 +429,10 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+CONFIG_BFIN_SIR1=y
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
 
 #
 # Dongle support
@@ -465,6 +462,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -473,14 +471,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -500,6 +495,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -572,20 +568,8 @@ CONFIG_MTD_NAND_IDS=m
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -595,10 +579,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -606,22 +588,18 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 CONFIG_PHYLIB=y
 
 #
@@ -635,21 +613,24 @@ CONFIG_PHYLIB=y
 # CONFIG_VITESSE_PHY is not set
 CONFIG_SMSC_PHY=y
 # CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
 # CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
-# CONFIG_SMC91X is not set
 CONFIG_BFIN_MAC=y
 CONFIG_BFIN_MAC_USE_L1=y
 CONFIG_BFIN_TX_DESC_NUM=10
 CONFIG_BFIN_RX_DESC_NUM=20
 # CONFIG_BFIN_MAC_RMII is not set
+# CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -666,15 +647,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -689,7 +662,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -702,14 +674,8 @@ CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_YEALINK is not set
 # CONFIG_INPUT_UINPUT is not set
 CONFIG_TWI_KEYPAD=m
-CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
 
 #
 # Hardware I/O ports
@@ -722,15 +688,13 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 CONFIG_BFIN_SPORT=y
 # CONFIG_BFIN_TIMER_LATENCY is not set
 CONFIG_TWI_LCD=m
-CONFIG_TWI_LCD_SLAVE_ADDR=34
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -766,28 +730,11 @@ CONFIG_CAN4LINUX=y
 # CONFIG_CAN_MCF5282 is not set
 # CONFIG_CAN_UNCTWINCAN is not set
 CONFIG_CAN_BLACKFIN=m
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
-CONFIG_BLACKFIN_DPMC=y
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
@@ -809,6 +756,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
 # CONFIG_I2C_STUB is not set
 
 #
@@ -816,14 +764,15 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
 CONFIG_SENSORS_AD5252=m
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -846,14 +795,11 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -861,12 +807,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -881,13 +827,16 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM87 is not set
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -897,6 +846,20 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -913,21 +876,15 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=m
-CONFIG_LCD_CLASS_DEVICE=m
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=m
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=m
 CONFIG_FB_CFB_COPYAREA=m
 CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -942,7 +899,8 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # Frame buffer hardware drivers
 #
-CONFIG_FB_BFIN_7171=m
+# CONFIG_FB_HITACHI_TX09 is not set
+# CONFIG_FB_BFIN_T350MCQB is not set
 CONFIG_FB_BFIN_7393=m
 CONFIG_NTSC=y
 # CONFIG_PAL is not set
@@ -956,10 +914,18 @@ CONFIG_FB_BF537_LQ035=m
 CONFIG_LQ035_SLAVE_ADDR=0x58
 # CONFIG_FB_BFIN_LANDSCAPE is not set
 # CONFIG_FB_BFIN_BGR is not set
-# CONFIG_FB_BFIN_T350MCQB is not set
-# CONFIG_FB_HITACHI_TX09 is not set
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_CORGI=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
 
 #
@@ -993,6 +959,10 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_MPU401 is not set
 
 #
+# SPI devices
+#
+
+#
 # ALSA Blackfin devices
 #
 CONFIG_SND_BLACKFIN_AD1836=m
@@ -1005,6 +975,10 @@ CONFIG_SND_BLACKFIN_SPI_PFBIT=4
 CONFIG_SND_BFIN_AD73311=m
 CONFIG_SND_BFIN_SPORT=0
 CONFIG_SND_BFIN_AD73311_SE=4
+CONFIG_SND_BFIN_AD73322=m
+CONFIG_SND_BFIN_AD73322_SPORT0_SE=10
+CONFIG_SND_BFIN_AD73322_SPORT1_SE=14
+CONFIG_SND_BFIN_AD73322_RESET=12
 
 #
 # System on Chip audio support
@@ -1016,9 +990,14 @@ CONFIG_SND_MMAP_SUPPORT=y
 CONFIG_SND_BF5XX_SOC_AC97=m
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set
 # CONFIG_SND_BF5XX_SOC_WM8731 is not set
+# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SOC_BF5xx=m
 CONFIG_SND_BF5XX_SPORT_NUM=0
 # CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set
+
+#
+# SoC Audio support for SuperH
+#
 CONFIG_SND_SOC_AD1980=m
 
 #
@@ -1026,59 +1005,18 @@ CONFIG_SND_SOC_AD1980=m
 #
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_NO_DUMMY_DELAY is not set
+# CONFIG_DUMMY_DELAY_BANK0 is not set
+# CONFIG_DUMMY_DELAY_BANK1 is not set
+# CONFIG_DUMMY_DELAY_BANK2 is not set
+# CONFIG_DUMMY_DELAY_BANK3 is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1098,6 +1036,7 @@ CONFIG_RTC_INTF_DEV=y
 # I2C RTC drivers
 #
 # CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_MAX6900 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
@@ -1105,6 +1044,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
 
 #
 # SPI RTC drivers
@@ -1116,8 +1056,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
@@ -1126,22 +1068,9 @@ CONFIG_RTC_INTF_DEV=y
 CONFIG_RTC_DRV_BFIN=y
 
 #
-# DMA Engine support
+# Userspace I/O
 #
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1186,7 +1115,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1212,10 +1140,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -1224,10 +1154,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1247,17 +1174,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1298,21 +1220,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1320,6 +1237,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1339,11 +1257,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1354,6 +1268,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 1ff2ff4b49aa..390669e8668e 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -365,7 +365,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x5554
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 CONFIG_EBIU_MBSCTLVAL=0x0
 CONFIG_EBIU_MODEVAL=0x1
 CONFIG_EBIU_FCTLVAL=0x6
@@ -468,7 +468,60 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+CONFIG_BFIN_SIR=m
+# CONFIG_BFIN_SIR0 is not set
+# CONFIG_BFIN_SIR2 is not set
+CONFIG_BFIN_SIR3=y
+CONFIG_SIR_BFIN_DMA=y
+# CONFIG_SIR_BFIN_PIO is not set
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# Old SIR device drivers
+#
+# CONFIG_IRPORT_SIR is not set
+
+#
+# Old Serial dongle support
+#
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 
@@ -575,6 +628,7 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_BF5XX=y
 CONFIG_MTD_NAND_BF5XX_HWECC=y
+# CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
 # CONFIG_MTD_NAND_PLATFORM is not set
@@ -766,7 +820,7 @@ CONFIG_BFIN_OTP=y
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
 # CONFIG_TWI_LCD is not set
-# CONFIG_SIMPLE_GPIO is not set
+CONFIG_SIMPLE_GPIO=m
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
@@ -1071,6 +1125,7 @@ CONFIG_SND_BF5XX_SOC_AC97=y
 CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y
 # CONFIG_SND_BF5XX_SOC_WM8750 is not set
 # CONFIG_SND_BF5XX_SOC_WM8731 is not set
+# CONFIG_SND_BF5XX_SOC_SSM2602 is not set
 CONFIG_SND_BF5XX_SPORT_NUM=0
 CONFIG_SND_BF5XX_HAVE_COLD_RESET=y
 CONFIG_SND_BF5XX_RESET_GPIO_NUM=19
@@ -1133,7 +1188,7 @@ CONFIG_USB_MUSB_HOST=y
 # CONFIG_USB_MUSB_OTG is not set
 CONFIG_USB_MUSB_HDRC_HCD=y
 # CONFIG_MUSB_PIO_ONLY is not set
-# CONFIG_USB_INVENTRA_DMA is not set
+CONFIG_USB_INVENTRA_DMA=y
 # CONFIG_USB_TI_CPPI_DMA is not set
 CONFIG_USB_MUSB_LOGLEVEL=0
 
@@ -1312,7 +1367,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index b4a20c890816..976a4d7ba175 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -1,6 +1,6 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_FORCE_MAX_ZONEORDER=14
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@ CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -140,7 +131,6 @@ CONFIG_BF_REV_0_3=y
 # CONFIG_BF_REV_0_5 is not set
 # CONFIG_BF_REV_ANY is not set
 # CONFIG_BF_REV_NONE is not set
-CONFIG_BFIN_DUAL_CORE=y
 CONFIG_MEM_MT48LC16M16A2TG_75=y
 CONFIG_IRQ_PLL_WAKEUP=7
 CONFIG_IRQ_SPORT0_ERROR=7
@@ -233,12 +223,14 @@ CONFIG_IRQ_WDTIMER=13
 # Board customizations
 #
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
 
 #
 # Clock/PLL Setup
 #
 CONFIG_CLKIN_HZ=30000000
 # CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
 CONFIG_MAX_VCO_HZ=600000000
 CONFIG_MIN_VCO_HZ=50000000
 CONFIG_MAX_SCLK_HZ=133333333
@@ -252,13 +244,17 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
-# Memory Setup
+# Misc
 #
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=9
-CONFIG_BOOT_LOAD=0x1000
 CONFIG_BFIN_SCRATCH_REG_RETN=y
 # CONFIG_BFIN_SCRATCH_REG_RETE is not set
 # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -294,12 +290,14 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
 # CONFIG_BFIN_GPTIMERS is not set
 CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
 # CONFIG_DMA_UNCACHED_2M is not set
 CONFIG_DMA_UNCACHED_1M=y
 # CONFIG_DMA_UNCACHED_NONE is not set
@@ -341,17 +339,13 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xAAC3
+CONFIG_BANK_3=0xAAC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
 #
 # CONFIG_PCI is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -367,9 +361,15 @@ CONFIG_BINFMT_ZFLAT=y
 # Power management options
 #
 # CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
 # CONFIG_PM_WAKEUP_BY_GPIO is not set
 
 #
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
 # Networking
 #
 CONFIG_NET=y
@@ -405,6 +405,7 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -431,10 +432,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -466,6 +463,7 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y
 # SIR device drivers
 #
 CONFIG_IRTTY_SIR=m
+# CONFIG_BFIN_SIR is not set
 
 #
 # Dongle support
@@ -495,6 +493,7 @@ CONFIG_IRTTY_SIR=m
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -503,14 +502,11 @@ CONFIG_IRTTY_SIR=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
@@ -530,6 +526,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -590,20 +587,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
@@ -613,10 +598,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_IDE is not set
 
 #
@@ -624,32 +607,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_AX88180 is not set
 CONFIG_NETDEV_10000=y
@@ -666,15 +646,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -689,7 +661,6 @@ CONFIG_INPUT=m
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=m
 # CONFIG_INPUT_EVBUG is not set
 
@@ -714,13 +685,12 @@ CONFIG_INPUT_EVDEV=m
 #
 # CONFIG_AD9960 is not set
 # CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
 # CONFIG_BF5xx_PPIFCD is not set
 # CONFIG_BFIN_SIMPLE_TIMER is not set
 # CONFIG_BF5xx_PPI is not set
 # CONFIG_BFIN_SPORT is not set
 # CONFIG_BFIN_TIMER_LATENCY is not set
-# CONFIG_AD5304 is not set
+CONFIG_SIMPLE_GPIO=m
 # CONFIG_VT is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -748,27 +718,11 @@ CONFIG_UNIX98_PTYS=y
 # CAN, the car bus and industrial fieldbus
 #
 # CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
 CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 
@@ -789,22 +743,37 @@ CONFIG_SPI_BFIN=y
 #
 # CONFIG_SPI_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -821,91 +790,33 @@ CONFIG_DAB=y
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
 
 #
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
+# Userspace I/O
 #
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -950,7 +861,6 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -976,10 +886,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
 CONFIG_JFFS2_FS=m
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
@@ -988,10 +900,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
@@ -1011,17 +920,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=m
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -1062,21 +966,16 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
 # CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
@@ -1084,6 +983,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
 CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1104,11 +1004,7 @@ CONFIG_ACCESS_CHECK=y
 # CONFIG_KEYS is not set
 CONFIG_SECURITY=y
 # CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
@@ -1119,6 +1015,7 @@ CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
new file mode 100644
index 000000000000..0799aa9bba9d
--- /dev/null
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -0,0 +1,1185 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.24.7
+# Fri Jul 18 18:00:41 2008
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF522 is not set
+# CONFIG_BF523 is not set
+# CONFIG_BF524 is not set
+# CONFIG_BF525 is not set
+# CONFIG_BF526 is not set
+CONFIG_BF527=y
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF547 is not set
+# CONFIG_BF548 is not set
+# CONFIG_BF549 is not set
+# CONFIG_BF561 is not set
+# CONFIG_BF_REV_0_0 is not set
+CONFIG_BF_REV_0_1=y
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF52x=y
+CONFIG_MEM_MT48LC16M16A2TG_75=y
+# CONFIG_BFIN527_EZKIT is not set
+CONFIG_BFIN527_BLUETECHNIX_CM=y
+
+#
+# BF527 Specific Configuration
+#
+
+#
+# Alternative Multiplexing Scheme
+#
+# CONFIG_BF527_SPORT0_PORTF is not set
+CONFIG_BF527_SPORT0_PORTG=y
+CONFIG_BF527_SPORT0_TSCLK_PG10=y
+# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set
+CONFIG_BF527_UART1_PORTF=y
+# CONFIG_BF527_UART1_PORTG is not set
+# CONFIG_BF527_NAND_D_PORTF is not set
+CONFIG_BF527_NAND_D_PORTH=y
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_DMA0_ERROR=7
+CONFIG_IRQ_DMAR0_BLK=7
+CONFIG_IRQ_DMAR1_BLK=7
+CONFIG_IRQ_DMAR0_OVR=7
+CONFIG_IRQ_DMAR1_OVR=7
+CONFIG_IRQ_PPI_ERROR=7
+CONFIG_IRQ_MAC_ERROR=7
+CONFIG_IRQ_SPORT0_ERROR=7
+CONFIG_IRQ_SPORT1_ERROR=7
+CONFIG_IRQ_UART0_ERROR=7
+CONFIG_IRQ_UART1_ERROR=7
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_PPI=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_TWI=10
+CONFIG_IRQ_SPI=10
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+CONFIG_IRQ_OPTSEC=11
+CONFIG_IRQ_CNT=11
+CONFIG_IRQ_MAC_RX=11
+CONFIG_IRQ_PORTH_INTA=11
+CONFIG_IRQ_MAC_TX=11
+CONFIG_IRQ_PORTH_INTB=11
+CONFIG_IRQ_TMR0=12
+CONFIG_IRQ_TMR1=12
+CONFIG_IRQ_TMR2=12
+CONFIG_IRQ_TMR3=12
+CONFIG_IRQ_TMR4=12
+CONFIG_IRQ_TMR5=12
+CONFIG_IRQ_TMR6=12
+CONFIG_IRQ_TMR7=12
+CONFIG_IRQ_PORTG_INTA=12
+CONFIG_IRQ_PORTG_INTB=12
+CONFIG_IRQ_MEM_DMA0=13
+CONFIG_IRQ_MEM_DMA1=13
+CONFIG_IRQ_WATCH=13
+CONFIG_IRQ_PORTF_INTA=13
+CONFIG_IRQ_PORTF_INTB=13
+CONFIG_IRQ_SPI_ERROR=7
+CONFIG_IRQ_NFC_ERROR=7
+CONFIG_IRQ_HDMA_ERROR=7
+CONFIG_IRQ_HDMA=7
+CONFIG_IRQ_USB_EINT=10
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Clock/PLL Setup
+#
+CONFIG_CLKIN_HZ=25000000
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
+CONFIG_MAX_VCO_HZ=600000000
+CONFIG_MIN_VCO_HZ=50000000
+CONFIG_MAX_SCLK_HZ=133333333
+CONFIG_MIN_SCLK_HZ=27000000
+
+#
+# Kernel Timer/Scheduler
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# Misc
+#
+CONFIG_BFIN_SCRATCH_REG_RETN=y
+# CONFIG_BFIN_SCRATCH_REG_RETE is not set
+# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+# CONFIG_SCHEDULE_L1 is not set
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+# CONFIG_MEMSET_L1 is not set
+# CONFIG_MEMCPY_L1 is not set
+# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_BFIN_GPTIMERS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BFIN_ICACHE=y
+CONFIG_BFIN_DCACHE=y
+# CONFIG_BFIN_DCACHE_BANKA is not set
+# CONFIG_BFIN_ICACHE_LOCK is not set
+# CONFIG_BFIN_WB is not set
+CONFIG_BFIN_WT=y
+# CONFIG_MPU is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMGCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x5554
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0xFFC0
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
+# CONFIG_PM_BFIN_SLEEP_DEEPER is not set
+# CONFIG_PM_BFIN_SLEEP is not set
+# CONFIG_PM_WAKEUP_BY_GPIO is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_JEDECPROBE=m
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=m
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+CONFIG_BFIN_MAC=y
+CONFIG_BFIN_MAC_USE_L1=y
+CONFIG_BFIN_TX_DESC_NUM=10
+CONFIG_BFIN_RX_DESC_NUM=20
+CONFIG_BFIN_MAC_RMII=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BFIN_SIMPLE_TIMER is not set
+# CONFIG_BF5xx_PPI is not set
+CONFIG_BFIN_OTP=y
+# CONFIG_BFIN_OTP_WRITE_ENABLE is not set
+# CONFIG_BFIN_SPORT is not set
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_TWI_LCD is not set
+CONFIG_SIMPLE_GPIO=m
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
+CONFIG_SERIAL_BFIN_UART0=y
+# CONFIG_BFIN_UART0_CTSRTS is not set
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_BFIN_UART1_CTSRTS is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+CONFIG_I2C_BLACKFIN_TWI=m
+CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_AD5252 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Blackfin high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_BFIN=y
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+# CONFIG_INSTRUMENTATION is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+CONFIG_DEBUG_BFIN_HWTRACE_ON=y
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
+# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set
+CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0
+# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CPLB_INFO is not set
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig
index 560890fe0d30..09deea44480b 100644
--- a/arch/blackfin/configs/CM-BF533_defconfig
+++ b/arch/blackfin/configs/CM-BF533_defconfig
@@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
@@ -291,7 +292,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -617,8 +618,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -778,7 +778,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -866,11 +866,11 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
+CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig
index 9f66d2de1007..219fc345a5f5 100644
--- a/arch/blackfin/configs/CM-BF537E_defconfig
+++ b/arch/blackfin/configs/CM-BF537E_defconfig
@@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
@@ -299,7 +300,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -351,7 +352,10 @@ CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
@@ -645,8 +649,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -806,7 +809,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -894,12 +897,12 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig
index 2694d06c5bde..9873d586fc77 100644
--- a/arch/blackfin/configs/CM-BF537U_defconfig
+++ b/arch/blackfin/configs/CM-BF537U_defconfig
@@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_TASKSTATS is not set
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
@@ -298,8 +299,8 @@ CONFIG_C_AMBEN_ALL=y
 #
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
-CONFIG_BANK_2=0xFFC3
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_2=0xFFC2
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -628,8 +629,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -806,7 +806,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -894,12 +894,12 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MMRS is not set
-# CONFIG_DEBUG_HUNT_FOR_ZERO is not set
+CONFIG_DEBUG_MMRS=y
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
 # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index 90207251c533..0e3605fdb7b0 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -363,7 +363,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x5554
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 CONFIG_EBIU_MBSCTLVAL=0x0
 CONFIG_EBIU_MODEVAL=0x1
 CONFIG_EBIU_FCTLVAL=0x6
@@ -744,8 +744,8 @@ CONFIG_BFIN_OTP=y
 #
 CONFIG_SERIAL_BFIN=y
 CONFIG_SERIAL_BFIN_CONSOLE=y
-# CONFIG_SERIAL_BFIN_DMA is not set
-CONFIG_SERIAL_BFIN_PIO=y
+CONFIG_SERIAL_BFIN_DMA=y
+# CONFIG_SERIAL_BFIN_PIO is not set
 # CONFIG_SERIAL_BFIN_UART0 is not set
 CONFIG_SERIAL_BFIN_UART1=y
 # CONFIG_BFIN_UART1_CTSRTS is not set
@@ -1149,7 +1149,7 @@ CONFIG_RTC_DRV_BFIN=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1332,7 +1332,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_MMRS is not set
+CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig
index daf00906c1ef..59c7cdbee904 100644
--- a/arch/blackfin/configs/CM-BF561_defconfig
+++ b/arch/blackfin/configs/CM-BF561_defconfig
@@ -35,7 +35,8 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_USER_NS is not set
 # CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
 CONFIG_FAIR_GROUP_SCHED=y
@@ -341,7 +342,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x7BB0
 CONFIG_BANK_2=0x7BB0
-CONFIG_BANK_3=0xFFC3
+CONFIG_BANK_3=0xFFC2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -631,8 +632,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_BFIN_SPORT is not set
 CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 
 #
 # CAN, the car bus and industrial fieldbus
@@ -756,7 +756,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -830,12 +830,12 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_MMRS is not set
+CONFIG_DEBUG_MMRS=y
 CONFIG_DEBUG_HUNT_FOR_ZERO=y
 CONFIG_DEBUG_BFIN_HWTRACE_ON=y
 CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y
diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig
index 679c7483ea71..ba0bee90b7e1 100644
--- a/arch/blackfin/configs/H8606_defconfig
+++ b/arch/blackfin/configs/H8606_defconfig
@@ -967,7 +967,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index 4384a670a8b8..285d2241df26 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -1066,7 +1066,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig
index 87622ad9df47..bffca7de65d4 100644
--- a/arch/blackfin/configs/PNAV-10_defconfig
+++ b/arch/blackfin/configs/PNAV-10_defconfig
@@ -294,7 +294,7 @@ CONFIG_C_AMBEN_ALL=y
 CONFIG_BANK_0=0x7BB0
 CONFIG_BANK_1=0x33B0
 CONFIG_BANK_2=0x33B0
-CONFIG_BANK_3=0x99B3
+CONFIG_BANK_3=0x99B2
 
 #
 # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
@@ -1080,7 +1080,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index 951ea0412576..b1309f878fcd 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -1067,7 +1067,7 @@ CONFIG_FS_MBCACHE=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 6140cd69c782..606adc78aa85 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -18,6 +18,5 @@ endif
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
 obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_BFIN_DMA_5XX)           += bfin_dma_5xx.o
-obj-$(CONFIG_DUAL_CORE_TEST_MODULE)  += dualcore_test.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index d54f19085f37..93229b3d6e3e 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -472,6 +472,40 @@ unsigned long get_dma_curr_addr(unsigned int channel)
 }
 EXPORT_SYMBOL(get_dma_curr_addr);
 
+#ifdef CONFIG_PM
+int blackfin_dma_suspend(void)
+{
+	int i;
+
+#ifdef CONFIG_BF561	/* IMDMA channels doesn't have a PERIPHERAL_MAP */
+	for (i = 0; i <= CH_MEM_STREAM3_SRC; i++) {
+#else
+	for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) {
+#endif
+		if (dma_ch[i].chan_status == DMA_CHANNEL_ENABLED) {
+			printk(KERN_ERR "DMA Channel %d failed to suspend\n", i);
+			return -EBUSY;
+		}
+
+		dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map;
+	}
+
+	return 0;
+}
+
+void blackfin_dma_resume(void)
+{
+	int i;
+
+#ifdef CONFIG_BF561	/* IMDMA channels doesn't have a PERIPHERAL_MAP */
+	for (i = 0; i <= CH_MEM_STREAM3_SRC; i++)
+#else
+	for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++)
+#endif
+		dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map;
+}
+#endif
+
 static void *__dma_memcpy(void *dest, const void *src, size_t size)
 {
 	int direction;	/* 1 - address decrease, 0 - address increase */
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index b6d89d1644cc..ecbd141e0ef2 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -186,7 +186,10 @@ static struct str_ident {
 	char name[RESOURCE_LABEL_SIZE];
 } str_ident[MAX_RESOURCES];
 
-#if defined(CONFIG_PM) && !defined(CONFIG_BF54x)
+#if defined(CONFIG_PM)
+#if defined(CONFIG_BF54x)
+static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)];
+#else
 static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
 static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS];
 static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)];
@@ -206,7 +209,7 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PORTF_INT
 #ifdef BF561_FAMILY
 static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB};
 #endif
-
+#endif
 #endif /* CONFIG_PM */
 
 #if defined(BF548_FAMILY)
@@ -667,7 +670,7 @@ static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type)
 	return 0;
 }
 
-u32 bfin_pm_setup(void)
+u32 bfin_pm_standby_setup(void)
 {
 	u16 bank, mask, i, gpio;
 
@@ -679,7 +682,7 @@ u32 bfin_pm_setup(void)
 		gpio_bankb[bank]->maskb = 0;
 
 		if (mask) {
-#ifdef BF537_FAMILY
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
 			gpio_bank_saved[bank].fer   = *port_fer[bank];
 #endif
 			gpio_bank_saved[bank].inen  = gpio_bankb[bank]->inen;
@@ -715,7 +718,7 @@ u32 bfin_pm_setup(void)
 	return 0;
 }
 
-void bfin_pm_restore(void)
+void bfin_pm_standby_restore(void)
 {
 	u16 bank, mask, i;
 
@@ -724,7 +727,7 @@ void bfin_pm_restore(void)
 		bank = gpio_bank(i);
 
 		if (mask) {
-#ifdef BF537_FAMILY
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
 			*port_fer[bank]   	= gpio_bank_saved[bank].fer;
 #endif
 			gpio_bankb[bank]->inen  = gpio_bank_saved[bank].inen;
@@ -743,8 +746,111 @@ void bfin_pm_restore(void)
 	AWA_DUMMY_READ(maskb);
 }
 
+void bfin_gpio_pm_hibernate_suspend(void)
+{
+	int i, bank;
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+		bank = gpio_bank(i);
+
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+			gpio_bank_saved[bank].fer   = *port_fer[bank];
+#ifdef BF527_FAMILY
+			gpio_bank_saved[bank].mux   = *port_mux[bank];
+#else
+			if (bank == 0)
+				gpio_bank_saved[bank].mux   = bfin_read_PORT_MUX();
+#endif
+#endif
+			gpio_bank_saved[bank].data  = gpio_bankb[bank]->data;
+			gpio_bank_saved[bank].inen  = gpio_bankb[bank]->inen;
+			gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar;
+			gpio_bank_saved[bank].dir   = gpio_bankb[bank]->dir;
+			gpio_bank_saved[bank].edge  = gpio_bankb[bank]->edge;
+			gpio_bank_saved[bank].both  = gpio_bankb[bank]->both;
+			gpio_bank_saved[bank].maska  = gpio_bankb[bank]->maska;
+	}
+
+	AWA_DUMMY_READ(maska);
+}
+
+void bfin_gpio_pm_hibernate_restore(void)
+{
+	int i, bank;
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+			bank = gpio_bank(i);
+
+#if defined(BF527_FAMILY) || defined(BF537_FAMILY)
+#ifdef BF527_FAMILY
+			*port_mux[bank] = gpio_bank_saved[bank].mux;
+#else
+			if (bank == 0)
+				bfin_write_PORT_MUX(gpio_bank_saved[bank].mux);
+#endif
+			*port_fer[bank]   	= gpio_bank_saved[bank].fer;
+#endif
+			gpio_bankb[bank]->inen  = gpio_bank_saved[bank].inen;
+			gpio_bankb[bank]->dir   = gpio_bank_saved[bank].dir;
+			gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar;
+			gpio_bankb[bank]->edge  = gpio_bank_saved[bank].edge;
+			gpio_bankb[bank]->both  = gpio_bank_saved[bank].both;
+
+			gpio_bankb[bank]->data_set = gpio_bank_saved[bank].data
+							| gpio_bank_saved[bank].dir;
+
+			gpio_bankb[bank]->maska = gpio_bank_saved[bank].maska;
+	}
+	AWA_DUMMY_READ(maska);
+}
+
+
 #endif
 #else /* BF548_FAMILY */
+#ifdef CONFIG_PM
+
+u32 bfin_pm_standby_setup(void)
+{
+	return 0;
+}
+
+void bfin_pm_standby_restore(void)
+{
+
+}
+
+void bfin_gpio_pm_hibernate_suspend(void)
+{
+	int i, bank;
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+		bank = gpio_bank(i);
+
+			gpio_bank_saved[bank].fer  = gpio_array[bank]->port_fer;
+			gpio_bank_saved[bank].mux  = gpio_array[bank]->port_mux;
+			gpio_bank_saved[bank].data  = gpio_array[bank]->port_data;
+			gpio_bank_saved[bank].data  = gpio_array[bank]->port_data;
+			gpio_bank_saved[bank].inen  = gpio_array[bank]->port_inen;
+			gpio_bank_saved[bank].dir   = gpio_array[bank]->port_dir_set;
+	}
+}
+
+void bfin_gpio_pm_hibernate_restore(void)
+{
+	int i, bank;
+
+	for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
+			bank = gpio_bank(i);
+
+			gpio_array[bank]->port_mux  = gpio_bank_saved[bank].mux;
+			gpio_array[bank]->port_fer  = gpio_bank_saved[bank].fer;
+			gpio_array[bank]->port_inen  = gpio_bank_saved[bank].inen;
+			gpio_array[bank]->port_dir_set   = gpio_bank_saved[bank].dir;
+			gpio_array[bank]->port_set = gpio_bank_saved[bank].data
+							| gpio_bank_saved[bank].dir;
+	}
+}
+#endif
 
 unsigned short get_gpio_dir(unsigned gpio)
 {
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
index 2788532de72b..ecbabc0a1fed 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
+++ b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S
@@ -125,6 +125,6 @@ ENTRY(__cplb_hdr)
 	SP += -12;
 	call _panic_cplb_error;
 	SP += 12;
-	JUMP _handle_bad_cplb;
+	JUMP.L _handle_bad_cplb;
 
 ENDPROC(__cplb_hdr)
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 6be0c50122e8..224e7cc30bc5 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -26,11 +26,7 @@
 #include <asm/cplb.h>
 #include <asm/cplbinit.h>
 
-#ifdef CONFIG_MAX_MEM_SIZE
-# define CPLB_MEM CONFIG_MAX_MEM_SIZE
-#else
-# define CPLB_MEM CONFIG_MEM_SIZE
-#endif
+#define CPLB_MEM CONFIG_MAX_MEM_SIZE
 
 /*
 * Number of required data CPLB switchtable entries
diff --git a/arch/blackfin/kernel/dualcore_test.c b/arch/blackfin/kernel/dualcore_test.c
deleted file mode 100644
index 0fcba74840b7..000000000000
--- a/arch/blackfin/kernel/dualcore_test.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * File:         arch/blackfin/kernel/dualcore_test.c
- * Based on:
- * Author:
- *
- * Created:
- * Description:  Small test code for CoreB on a BF561
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-
-static int *testarg = (int *)0xfeb00000;
-
-static int test_init(void)
-{
-	*testarg = 1;
-	printk(KERN_INFO "Dual core test module inserted: set testarg = [%d]\n @ [%p]\n",
-	       *testarg, testarg);
-	return 0;
-}
-
-static void test_exit(void)
-{
-	printk(KERN_INFO "Dual core test module removed: testarg = [%d]\n", *testarg);
-}
-
-module_init(test_init);
-module_exit(test_exit);
diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S
index 65f4e67a65c4..31bd9bf3efae 100644
--- a/arch/blackfin/kernel/entry.S
+++ b/arch/blackfin/kernel/entry.S
@@ -64,6 +64,11 @@ ENDPROC(_ret_from_fork)
 
 ENTRY(_sys_fork)
 	r0 = -EINVAL;
+#if (ANOMALY_05000371)
+	nop;
+	nop;
+	nop;
+#endif
 	rts;
 ENDPROC(_sys_fork)
 
diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c
index a9c15515bfd7..a1f9641a6425 100644
--- a/arch/blackfin/kernel/kgdb.c
+++ b/arch/blackfin/kernel/kgdb.c
@@ -203,6 +203,8 @@ struct hw_breakpoint {
 
 int kgdb_arch_init(void)
 {
+	debugger_step = 0;
+
 	kgdb_remove_all_hw_break();
 	return 0;
 }
@@ -368,6 +370,7 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo,
 	char *ptr;
 	int newPC;
 	int wp_status;
+	int i;
 
 	switch (remcom_in_buffer[0]) {
 	case 'c':
@@ -392,7 +395,18 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo,
 		/* set the trace bit if we're stepping */
 		if (remcom_in_buffer[0] == 's') {
 			linux_regs->syscfg |= 0x1;
-			debugger_step = 1;
+			debugger_step = linux_regs->ipend;
+			debugger_step >>= 6;
+			for (i = 10; i > 0; i--, debugger_step >>= 1)
+				if (debugger_step & 1)
+					break;
+			/* i indicate event priority of current stopped instruction
+			 * user space instruction is 0, IVG15 is 1, IVTMR is 10.
+			 * debugger_step > 0 means in single step mode
+			 */
+			debugger_step = i + 1;
+		} else {
+			debugger_step = 0;
 		}
 
 		wp_status = bfin_read_WPSTAT();
diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c
index 14a42848f37f..e1bebc80a5bf 100644
--- a/arch/blackfin/kernel/module.c
+++ b/arch/blackfin/kernel/module.c
@@ -173,7 +173,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 	for (s = sechdrs; s < sechdrs_end; ++s) {
 		if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) ||
 		    ((strcmp(".text", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) {
+		     (hdr->e_flags & EF_BFIN_CODE_IN_L1) && (s->sh_size > 0))) {
 			dest = l1_inst_sram_alloc(s->sh_size);
 			mod->arch.text_l1 = dest;
 			if (dest == NULL) {
@@ -188,7 +188,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 		}
 		if ((strcmp(".l1.data", secstrings + s->sh_name) == 0) ||
 		    ((strcmp(".data", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+		     (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) {
 			dest = l1_data_sram_alloc(s->sh_size);
 			mod->arch.data_a_l1 = dest;
 			if (dest == NULL) {
@@ -203,7 +203,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 		}
 		if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 ||
 		    ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
-		     (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+		     (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) {
 			dest = l1_data_sram_alloc(s->sh_size);
 			mod->arch.bss_a_l1 = dest;
 			if (dest == NULL) {
@@ -242,6 +242,51 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs,
 			s->sh_flags &= ~SHF_ALLOC;
 			s->sh_addr = (unsigned long)dest;
 		}
+		if ((strcmp(".l2.text", secstrings + s->sh_name) == 0) ||
+		    ((strcmp(".text", secstrings + s->sh_name) == 0) &&
+		     (hdr->e_flags & EF_BFIN_CODE_IN_L2) && (s->sh_size > 0))) {
+			dest = l2_sram_alloc(s->sh_size);
+			mod->arch.text_l2 = dest;
+			if (dest == NULL) {
+				printk(KERN_ERR
+				       "module %s: L2 SRAM allocation failed\n",
+				       mod->name);
+				return -1;
+			}
+			memcpy(dest, (void *)s->sh_addr, s->sh_size);
+			s->sh_flags &= ~SHF_ALLOC;
+			s->sh_addr = (unsigned long)dest;
+		}
+		if ((strcmp(".l2.data", secstrings + s->sh_name) == 0) ||
+		    ((strcmp(".data", secstrings + s->sh_name) == 0) &&
+		     (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) {
+			dest = l2_sram_alloc(s->sh_size);
+			mod->arch.data_l2 = dest;
+			if (dest == NULL) {
+				printk(KERN_ERR
+					"module %s: L2 SRAM allocation failed\n",
+					mod->name);
+				return -1;
+			}
+			memcpy(dest, (void *)s->sh_addr, s->sh_size);
+			s->sh_flags &= ~SHF_ALLOC;
+			s->sh_addr = (unsigned long)dest;
+		}
+		if (strcmp(".l2.bss", secstrings + s->sh_name) == 0 ||
+		    ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
+		     (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) {
+			dest = l2_sram_alloc(s->sh_size);
+			mod->arch.bss_l2 = dest;
+			if (dest == NULL) {
+				printk(KERN_ERR
+					"module %s: L2 SRAM allocation failed\n",
+					mod->name);
+				return -1;
+			}
+			memset(dest, 0, s->sh_size);
+			s->sh_flags &= ~SHF_ALLOC;
+			s->sh_addr = (unsigned long)dest;
+		}
 	}
 	return 0;
 }
@@ -411,9 +456,10 @@ module_finalize(const Elf_Ehdr * hdr,
 			continue;
 
 		if ((sechdrs[i].sh_type == SHT_RELA) &&
-		    ((strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) ||
+		    ((strcmp(".rela.l2.text", secstrings + sechdrs[i].sh_name) == 0) ||
+		    (strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) ||
 		    ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) &&
-			 (hdr->e_flags & FLG_CODE_IN_L1)))) {
+			(hdr->e_flags & (EF_BFIN_CODE_IN_L1|EF_BFIN_CODE_IN_L2))))) {
 			apply_relocate_add((Elf_Shdr *) sechdrs, strtab,
 					   symindex, i, mod);
 		}
@@ -423,14 +469,12 @@ module_finalize(const Elf_Ehdr * hdr,
 
 void module_arch_cleanup(struct module *mod)
 {
-	if (mod->arch.text_l1)
-		l1_inst_sram_free((void *)mod->arch.text_l1);
-	if (mod->arch.data_a_l1)
-		l1_data_sram_free((void *)mod->arch.data_a_l1);
-	if (mod->arch.bss_a_l1)
-		l1_data_sram_free((void *)mod->arch.bss_a_l1);
-	if (mod->arch.data_b_l1)
-		l1_data_B_sram_free((void *)mod->arch.data_b_l1);
-	if (mod->arch.bss_b_l1)
-		l1_data_B_sram_free((void *)mod->arch.bss_b_l1);
+	l1_inst_sram_free(mod->arch.text_l1);
+	l1_data_A_sram_free(mod->arch.data_a_l1);
+	l1_data_A_sram_free(mod->arch.bss_a_l1);
+	l1_data_B_sram_free(mod->arch.data_b_l1);
+	l1_data_B_sram_free(mod->arch.bss_b_l1);
+	l2_sram_free(mod->arch.text_l2);
+	l2_sram_free(mod->arch.data_l2);
+	l2_sram_free(mod->arch.bss_l2);
 }
diff --git a/arch/blackfin/kernel/process.c b/arch/blackfin/kernel/process.c
index 53c2cd255441..77800dd83e57 100644
--- a/arch/blackfin/kernel/process.c
+++ b/arch/blackfin/kernel/process.c
@@ -105,7 +105,7 @@ void cpu_idle(void)
 #endif
 		if (!idle)
 			idle = default_idle;
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			idle();
 		tick_nohz_restart_sched_tick();
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index f51ab088098e..bf1a51d8e608 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -220,6 +220,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				copied = sizeof(tmp);
 			} else
 #endif
+#if L1_DATA_A_LENGTH != 0
+			if (addr + add >= L1_DATA_A_START
+			    && addr + add + sizeof(tmp) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
+				memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+				copied = sizeof(tmp);
+			} else
+#endif
+#if L1_DATA_B_LENGTH != 0
+			if (addr + add >= L1_DATA_B_START
+			    && addr + add + sizeof(tmp) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
+				memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
+				copied = sizeof(tmp);
+			} else
+#endif
 			if (addr + add >= FIXED_CODE_START
 			    && addr + add + sizeof(tmp) <= FIXED_CODE_END) {
 				memcpy(&tmp, (const void *)(addr + add), sizeof(tmp));
@@ -290,6 +304,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				copied = sizeof(data);
 			} else
 #endif
+#if L1_DATA_A_LENGTH != 0
+			if (addr + add >= L1_DATA_A_START
+			    && addr + add + sizeof(data) <= L1_DATA_A_START + L1_DATA_A_LENGTH) {
+				memcpy((void *)(addr + add), &data, sizeof(data));
+				copied = sizeof(data);
+			} else
+#endif
+#if L1_DATA_B_LENGTH != 0
+			if (addr + add >= L1_DATA_B_START
+			    && addr + add + sizeof(data) <= L1_DATA_B_START + L1_DATA_B_LENGTH) {
+				memcpy((void *)(addr + add), &data, sizeof(data));
+				copied = sizeof(data);
+			} else
+#endif
 			if (addr + add >= FIXED_CODE_START
 			    && addr + add + sizeof(data) <= FIXED_CODE_END) {
 				memcpy((void *)(addr + add), &data, sizeof(data));
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index 8efea004aecb..23e637eb78da 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -104,6 +104,7 @@ void __init bf53x_relocate_l1_mem(void)
 	unsigned long l1_code_length;
 	unsigned long l1_data_a_length;
 	unsigned long l1_data_b_length;
+	unsigned long l2_length;
 
 	l1_code_length = _etext_l1 - _stext_l1;
 	if (l1_code_length > L1_CODE_LENGTH)
@@ -129,6 +130,15 @@ void __init bf53x_relocate_l1_mem(void)
 	/* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */
 	dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
 			l1_data_a_length, l1_data_b_length);
+
+#ifdef L2_LENGTH
+	l2_length = _ebss_l2 - _stext_l2;
+	if (l2_length > L2_LENGTH)
+		panic("L2 SRAM Overflow\n");
+
+	/* Copy _stext_l2 to _edata_l2 to L2 SRAM */
+	dma_memcpy(_stext_l2, _l2_lma_start, l2_length);
+#endif
 }
 
 /* add_memory_region to memmap */
@@ -664,11 +674,8 @@ static __init void setup_bootmem_allocator(void)
 })
 static inline int __init get_mem_size(void)
 {
-#ifdef CONFIG_MEM_SIZE
-	return CONFIG_MEM_SIZE;
-#else
-# if defined(EBIU_SDBCTL)
-#  if defined(BF561_FAMILY)
+#if defined(EBIU_SDBCTL)
+# if defined(BF561_FAMILY)
 	int ret = 0;
 	u32 sdbctl = bfin_read_EBIU_SDBCTL();
 	ret += EBSZ_TO_MEG(sdbctl >>  0);
@@ -676,10 +683,10 @@ static inline int __init get_mem_size(void)
 	ret += EBSZ_TO_MEG(sdbctl >> 16);
 	ret += EBSZ_TO_MEG(sdbctl >> 24);
 	return ret;
-#  else
+# else
 	return EBSZ_TO_MEG(bfin_read_EBIU_SDBCTL());
-#  endif
-# elif defined(EBIU_DDRCTL1)
+# endif
+#elif defined(EBIU_DDRCTL1)
 	u32 ddrctl = bfin_read_EBIU_DDRCTL1();
 	int ret = 0;
 	switch (ddrctl & 0xc0000) {
@@ -693,8 +700,9 @@ static inline int __init get_mem_size(void)
 		case DEVWD_8:  ret *= 2;
 		case DEVWD_16: break;
 	}
+	if ((ddrctl & 0xc000) == 0x4000)
+		ret *= 2;
 	return ret;
-# endif
 #endif
 	BUG();
 }
@@ -763,6 +771,9 @@ void __init setup_arch(char **cmdline_p)
 
 	_bfin_swrst = bfin_read_SWRST();
 
+	/* If we double fault, reset the system - otherwise we hang forever */
+	bfin_write_SWRST(DOUBLE_FAULT);
+
 	if (_bfin_swrst & RESET_DOUBLE)
 		printk(KERN_INFO "Recovering from Double Fault event\n");
 	else if (_bfin_swrst & RESET_WDOG)
@@ -842,38 +853,55 @@ static int __init topology_init(void)
 
 subsys_initcall(topology_init);
 
+/* Get the voltage input multiplier */
+static u_long cached_vco_pll_ctl, cached_vco;
 static u_long get_vco(void)
 {
 	u_long msel;
-	u_long vco;
 
-	msel = (bfin_read_PLL_CTL() >> 9) & 0x3F;
+	u_long pll_ctl = bfin_read_PLL_CTL();
+	if (pll_ctl == cached_vco_pll_ctl)
+		return cached_vco;
+	else
+		cached_vco_pll_ctl = pll_ctl;
+
+	msel = (pll_ctl >> 9) & 0x3F;
 	if (0 == msel)
 		msel = 64;
 
-	vco = CONFIG_CLKIN_HZ;
-	vco >>= (1 & bfin_read_PLL_CTL());	/* DF bit */
-	vco = msel * vco;
-	return vco;
+	cached_vco = CONFIG_CLKIN_HZ;
+	cached_vco >>= (1 & pll_ctl);	/* DF bit */
+	cached_vco *= msel;
+	return cached_vco;
 }
 
 /* Get the Core clock */
+static u_long cached_cclk_pll_div, cached_cclk;
 u_long get_cclk(void)
 {
 	u_long csel, ssel;
+
 	if (bfin_read_PLL_STAT() & 0x1)
 		return CONFIG_CLKIN_HZ;
 
 	ssel = bfin_read_PLL_DIV();
+	if (ssel == cached_cclk_pll_div)
+		return cached_cclk;
+	else
+		cached_cclk_pll_div = ssel;
+
 	csel = ((ssel >> 4) & 0x03);
 	ssel &= 0xf;
 	if (ssel && ssel < (1 << csel))	/* SCLK > CCLK */
-		return get_vco() / ssel;
-	return get_vco() >> csel;
+		cached_cclk = get_vco() / ssel;
+	else
+		cached_cclk = get_vco() >> csel;
+	return cached_cclk;
 }
 EXPORT_SYMBOL(get_cclk);
 
 /* Get the System clock */
+static u_long cached_sclk_pll_div, cached_sclk;
 u_long get_sclk(void)
 {
 	u_long ssel;
@@ -881,13 +909,20 @@ u_long get_sclk(void)
 	if (bfin_read_PLL_STAT() & 0x1)
 		return CONFIG_CLKIN_HZ;
 
-	ssel = (bfin_read_PLL_DIV() & 0xf);
+	ssel = bfin_read_PLL_DIV();
+	if (ssel == cached_sclk_pll_div)
+		return cached_sclk;
+	else
+		cached_sclk_pll_div = ssel;
+
+	ssel &= 0xf;
 	if (0 == ssel) {
 		printk(KERN_WARNING "Invalid System Clock\n");
 		ssel = 1;
 	}
 
-	return get_vco() / ssel;
+	cached_sclk = get_vco() / ssel;
+	return cached_sclk;
 }
 EXPORT_SYMBOL(get_sclk);
 
@@ -916,7 +951,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	uint32_t revid;
 
 	u_long cclk = 0, sclk = 0;
-	u_int dcache_size = 0, dsup_banks = 0;
+	u_int icache_size = BFIN_ICACHESIZE / 1024, dcache_size = 0, dsup_banks = 0;
 
 	cpu = CPU;
 	mmu = "none";
@@ -985,12 +1020,15 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	}
 
 	/* Is it turned on? */
-	if (!((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE)))
+	if ((bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
 		dcache_size = 0;
 
+	if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) == (IMC | ENICPLB))
+		icache_size = 0;
+
 	seq_printf(m, "cache size\t: %d KB(L1 icache) "
 		"%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
-		BFIN_ICACHESIZE / 1024, dcache_size,
+		icache_size, dcache_size,
 #if defined CONFIG_BFIN_WB
 		"wb"
 #elif defined CONFIG_BFIN_WT
@@ -1000,8 +1038,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
 	seq_printf(m, "%s\n", cache);
 
-	seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
-		   BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
+	if (icache_size)
+		seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n",
+			   BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES);
+	else
+		seq_printf(m, "icache setup\t: off\n");
+
 	seq_printf(m,
 		   "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
 		   dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index f061f5181623..ad922ab91543 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -69,8 +69,6 @@ void __init trap_init(void)
 
 unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
 
-int kstack_depth_to_print = 48;
-
 static void decode_address(char *buf, unsigned long address)
 {
 	struct vm_list_struct *vml;
@@ -163,6 +161,9 @@ static void decode_address(char *buf, unsigned long address)
 				if (!in_atomic)
 					mmput(mm);
 
+				if (!strlen(buf))
+					sprintf(buf, "<0x%p> [ %s ] dynamic memory", (void *)address, name);
+
 				goto done;
 			}
 
@@ -173,7 +174,7 @@ static void decode_address(char *buf, unsigned long address)
 	}
 
 	/* we were unable to find this address anywhere */
-	sprintf(buf, "<0x%p> /* unknown address */", (void *)address);
+	sprintf(buf, "<0x%p> /* kernel dynamic memory */", (void *)address);
 
 done:
 	write_unlock_irqrestore(&tasklist_lock, flags);
@@ -494,7 +495,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 	BUG_ON(sig == 0);
 
 	if (sig != SIGTRAP) {
-		unsigned long stack;
+		unsigned long *stack;
 		dump_bfin_process(fp);
 		dump_bfin_mem(fp);
 		show_regs(fp);
@@ -508,14 +509,23 @@ asmlinkage void trap_c(struct pt_regs *fp)
 		else
 #endif
 			dump_bfin_trace_buffer();
-		show_stack(current, &stack);
+
 		if (oops_in_progress) {
+			/* Dump the current kernel stack */
+			printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n");
+			show_stack(current, NULL);
+
 			print_modules();
 #ifndef CONFIG_ACCESS_CHECK
 			printk(KERN_EMERG "Please turn on "
 			       "CONFIG_ACCESS_CHECK\n");
 #endif
 			panic("Kernel exception");
+		} else {
+			/* Dump the user space stack */
+			stack = (unsigned long *)rdusp();
+			printk(KERN_NOTICE "Userspace Stack\n");
+			show_stack(NULL, stack);
 		}
 	}
 
@@ -532,11 +542,71 @@ asmlinkage void trap_c(struct pt_regs *fp)
 
 #define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1)
 
+/*
+ * Similar to get_user, do some address checking, then dereference
+ * Return true on sucess, false on bad address
+ */
+bool get_instruction(unsigned short *val, unsigned short *address)
+{
+
+	unsigned long addr;
+
+	addr = (unsigned long)address;
+
+	/* Check for odd addresses */
+	if (addr & 0x1)
+		return false;
+
+	/* Check that things do not wrap around */
+	if (addr > (addr + 2))
+		return false;
+
+	/*
+	 * Since we are in exception context, we need to do a little address checking
+	 * We need to make sure we are only accessing valid memory, and
+	 * we don't read something in the async space that can hang forever
+	 */
+	if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) ||
+#ifdef L2_START
+	    (addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) ||
+#endif
+	    (addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) ||
+#if L1_DATA_A_LENGTH != 0
+	    (addr >= L1_DATA_A_START && (addr + 2) <= (L1_DATA_A_START + L1_DATA_A_LENGTH)) ||
+#endif
+#if L1_DATA_B_LENGTH != 0
+	    (addr >= L1_DATA_B_START && (addr + 2) <= (L1_DATA_B_START + L1_DATA_B_LENGTH)) ||
+#endif
+	    (addr >= L1_SCRATCH_START && (addr + 2) <= (L1_SCRATCH_START + L1_SCRATCH_LENGTH)) ||
+	    (!(bfin_read_EBIU_AMBCTL0() & B0RDYEN) &&
+	       addr >= ASYNC_BANK0_BASE && (addr + 2) <= (ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)) ||
+	    (!(bfin_read_EBIU_AMBCTL0() & B1RDYEN) &&
+	       addr >= ASYNC_BANK1_BASE && (addr + 2) <= (ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)) ||
+	    (!(bfin_read_EBIU_AMBCTL1() & B2RDYEN) &&
+	       addr >= ASYNC_BANK2_BASE && (addr + 2) <= (ASYNC_BANK2_BASE + ASYNC_BANK1_SIZE)) ||
+	    (!(bfin_read_EBIU_AMBCTL1() & B3RDYEN) &&
+	      addr >= ASYNC_BANK3_BASE && (addr + 2) <= (ASYNC_BANK3_BASE + ASYNC_BANK1_SIZE))) {
+		*val = *address;
+		return true;
+	}
+
+#if L1_CODE_LENGTH != 0
+	if (addr >= L1_CODE_START && (addr + 2) <= (L1_CODE_START + L1_CODE_LENGTH)) {
+		dma_memcpy(val, address, 2);
+		return true;
+	}
+#endif
+
+
+	return false;
+}
+
 void dump_bfin_trace_buffer(void)
 {
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON
 	int tflags, i = 0;
 	char buf[150];
+	unsigned short val = 0, *addr;
 #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND
 	int j, index;
 #endif
@@ -549,8 +619,42 @@ void dump_bfin_trace_buffer(void)
 		for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) {
 			decode_address(buf, (unsigned long)bfin_read_TBUF());
 			printk(KERN_NOTICE "%4i Target : %s\n", i, buf);
-			decode_address(buf, (unsigned long)bfin_read_TBUF());
-			printk(KERN_NOTICE "     Source : %s\n", buf);
+			addr = (unsigned short *)bfin_read_TBUF();
+			decode_address(buf, (unsigned long)addr);
+			printk(KERN_NOTICE "     Source : %s ", buf);
+			if (get_instruction(&val, addr)) {
+				if (val == 0x0010)
+					printk("RTS");
+				else if (val == 0x0011)
+					printk("RTI");
+				else if (val == 0x0012)
+					printk("RTX");
+				else if (val >= 0x0050 && val <= 0x0057)
+					printk("JUMP (P%i)", val & 7);
+				else if (val >= 0x0060 && val <= 0x0067)
+					printk("CALL (P%i)", val & 7);
+				else if (val >= 0x0070 && val <= 0x0077)
+					printk("CALL (PC+P%i)", val & 7);
+				else if (val >= 0x0080 && val <= 0x0087)
+					printk("JUMP (PC+P%i)", val & 7);
+				else if ((val >= 0x1000 && val <= 0x13FF) ||
+				    (val >= 0x1800 && val <= 0x1BFF))
+					printk("IF !CC JUMP");
+				else if ((val >= 0x1400 && val <= 0x17ff) ||
+				    (val >= 0x1c00 && val <= 0x1fff))
+					printk("IF CC JUMP");
+				else if (val >= 0x2000 && val <= 0x2fff)
+					printk("JUMP.S");
+				else if (val >= 0xe080 && val <= 0xe0ff)
+					printk("LSETUP");
+				else if (val >= 0xe200 && val <= 0xe2ff)
+					printk("JUMP.L");
+				else if (val >= 0xe300 && val <= 0xe3ff)
+					printk("CALL pcrel");
+				else
+					printk("0x%04x", val);
+			}
+			printk("\n");
 		}
 	}
 
@@ -582,59 +686,151 @@ void dump_bfin_trace_buffer(void)
 }
 EXPORT_SYMBOL(dump_bfin_trace_buffer);
 
-static void show_trace(struct task_struct *tsk, unsigned long *sp)
+/*
+ * Checks to see if the address pointed to is either a
+ * 16-bit CALL instruction, or a 32-bit CALL instruction
+ */
+bool is_bfin_call(unsigned short *addr)
 {
-	unsigned long addr;
+	unsigned short opcode = 0, *ins_addr;
+	ins_addr = (unsigned short *)addr;
 
-	printk(KERN_NOTICE "\n" KERN_NOTICE "Call Trace:\n");
-
-	while (!kstack_end(sp)) {
-		addr = *sp++;
-		/*
-		 * If the address is either in the text segment of the
-		 * kernel, or in the region which contains vmalloc'ed
-		 * memory, it *may* be the address of a calling
-		 * routine; if so, print it so that someone tracing
-		 * down the cause of the crash will be able to figure
-		 * out the call path that was taken.
-		 */
-		if (kernel_text_address(addr))
-			print_ip_sym(addr);
-	}
+	if (!get_instruction(&opcode, ins_addr))
+		return false;
 
-	printk(KERN_NOTICE "\n");
-}
+	if ((opcode >= 0x0060 && opcode <= 0x0067) ||
+	    (opcode >= 0x0070 && opcode <= 0x0077))
+		return true;
+
+	ins_addr--;
+	if (!get_instruction(&opcode, ins_addr))
+		return false;
 
+	if (opcode >= 0xE300 && opcode <= 0xE3FF)
+		return true;
+
+	return false;
+
+}
 void show_stack(struct task_struct *task, unsigned long *stack)
 {
-	unsigned long *endstack, addr;
-	int i;
+	unsigned int *addr, *endstack, *fp = 0, *frame;
+	unsigned short *ins_addr;
+	char buf[150];
+	unsigned int i, j, ret_addr, frame_no = 0;
 
-	/* Cannot call dump_bfin_trace_buffer() here as show_stack() is
-	 * called externally in some places in the kernel.
+	/*
+	 * If we have been passed a specific stack, use that one otherwise
+	 *    if we have been passed a task structure, use that, otherwise
+	 *    use the stack of where the variable "stack" exists
 	 */
 
-	if (!stack) {
-		if (task)
+	if (stack == NULL) {
+		if (task) {
+			/* We know this is a kernel stack, so this is the start/end */
 			stack = (unsigned long *)task->thread.ksp;
-		else
+			endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE);
+		} else {
+			/* print out the existing stack info */
 			stack = (unsigned long *)&stack;
+			endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+		}
+	} else
+		endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack);
+
+	decode_address(buf, (unsigned int)stack);
+	printk(KERN_NOTICE "Stack info:\n" KERN_NOTICE " SP: [0x%p] %s\n", stack, buf);
+	addr = (unsigned int *)((unsigned int)stack & ~0x3F);
+
+	/* First thing is to look for a frame pointer */
+	for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
+		addr < endstack; addr++, i++) {
+		if (*addr & 0x1)
+			continue;
+		ins_addr = (unsigned short *)*addr;
+		ins_addr--;
+		if (is_bfin_call(ins_addr))
+			fp = addr - 1;
+
+		if (fp) {
+			/* Let's check to see if it is a frame pointer */
+			while (fp >= (addr - 1) && fp < endstack && fp)
+				fp = (unsigned int *)*fp;
+			if (fp == 0 || fp == endstack) {
+				fp = addr - 1;
+				break;
+			}
+			fp = 0;
+		}
 	}
+	if (fp) {
+		frame = fp;
+		printk(" FP: (0x%p)\n", fp);
+	} else
+		frame = 0;
 
-	addr = (unsigned long)stack;
-	endstack = (unsigned long *)PAGE_ALIGN(addr);
+	/*
+	 * Now that we think we know where things are, we
+	 * walk the stack again, this time printing things out
+	 * incase there is no frame pointer, we still look for
+	 * valid return addresses
+	 */
 
-	printk(KERN_NOTICE "Stack from %08lx:", (unsigned long)stack);
-	for (i = 0; i < kstack_depth_to_print; i++) {
-		if (stack + 1 > endstack)
-			break;
-		if (i % 8 == 0)
-			printk("\n" KERN_NOTICE "       ");
-		printk(" %08lx", *stack++);
+	/* First time print out data, next time, print out symbols */
+	for (j = 0; j <= 1; j++) {
+		if (j)
+			printk(KERN_NOTICE "Return addresses in stack:\n");
+		else
+			printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack);
+
+		fp = frame;
+		frame_no = 0;
+
+		for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0;
+		     addr <= endstack; addr++, i++) {
+
+			ret_addr = 0;
+			if (!j && i % 8 == 0)
+				printk("\n" KERN_NOTICE "%p:",addr);
+
+			/* if it is an odd address, or zero, just skip it */
+			if (*addr & 0x1 || !*addr)
+				goto print;
+
+			ins_addr = (unsigned short *)*addr;
+
+			/* Go back one instruction, and see if it is a CALL */
+			ins_addr--;
+			ret_addr = is_bfin_call(ins_addr);
+ print:
+			if (!j && stack == (unsigned long *)addr)
+				printk("[%08x]", *addr);
+			else if (ret_addr)
+				if (j) {
+					decode_address(buf, (unsigned int)*addr);
+					if (frame == addr) {
+						printk(KERN_NOTICE "   frame %2i : %s\n", frame_no, buf);
+						continue;
+					}
+					printk(KERN_NOTICE "    address : %s\n", buf);
+				} else
+					printk("<%08x>", *addr);
+			else if (fp == addr) {
+				if (j)
+					frame = addr+1;
+				else
+					printk("(%08x)", *addr);
+
+				fp = (unsigned int *)*addr;
+				frame_no++;
+
+			} else if (!j)
+				printk(" %08x ", *addr);
+		}
+		if (!j)
+			printk("\n");
 	}
-	printk("\n");
 
-	show_trace(task, stack);
 }
 
 void dump_stack(void)
@@ -715,19 +911,9 @@ void dump_bfin_mem(struct pt_regs *fp)
 		if (!((unsigned long)addr & 0xF))
 			printk("\n" KERN_NOTICE "0x%p: ", addr);
 
-		if (get_user(val, addr)) {
-			if (addr >= (unsigned short *)L1_CODE_START &&
-			    addr < (unsigned short *)(L1_CODE_START + L1_CODE_LENGTH)) {
-				dma_memcpy(&val, addr, sizeof(val));
-				sprintf(buf, "%04x", val);
-			} else if (addr >= (unsigned short *)FIXED_CODE_START &&
-				addr <= (unsigned short *)memory_start) {
-				val = bfin_read16(addr);
-				sprintf(buf, "%04x", val);
-			} else {
+		if (get_instruction(&val, addr)) {
 				val = 0;
 				sprintf(buf, "????");
-			}
 		} else
 			sprintf(buf, "%04x", val);
 
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 3ecc64cab3be..0896e38d6108 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -101,6 +101,11 @@ SECTIONS
 #if !L1_DATA_B_LENGTH
 		*(.l1.data.B)
 #endif
+#ifndef L2_LENGTH
+		. = ALIGN(32);
+		*(.data_l2.cacheline_aligned)
+		*(.l2.data)
+#endif
 
 		DATA_DATA
 		*(.data.*)
@@ -182,14 +187,13 @@ SECTIONS
 		*(.l1.data)
 		__edata_l1 = .;
 
-		. = ALIGN(4);
-		__sbss_l1 = .;
-		*(.l1.bss)
-
 		. = ALIGN(32);
 		*(.data_l1.cacheline_aligned)
 
 		. = ALIGN(4);
+		__sbss_l1 = .;
+		*(.l1.bss)
+		. = ALIGN(4);
 		__ebss_l1 = .;
 	}
 
@@ -203,11 +207,37 @@ SECTIONS
 		. = ALIGN(4);
 		__sbss_b_l1 = .;
 		*(.l1.bss.B)
-
 		. = ALIGN(4);
 		__ebss_b_l1 = .;
 	}
 
+#ifdef L2_LENGTH
+	__l2_lma_start = .;
+
+	.text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1))
+	{
+		. = ALIGN(4);
+		__stext_l2 = .;
+		*(.l1.text)
+		. = ALIGN(4);
+		__etext_l2 = .;
+
+		. = ALIGN(4);
+		__sdata_l2 = .;
+		*(.l1.data)
+		__edata_l2 = .;
+
+		. = ALIGN(32);
+		*(.data_l2.cacheline_aligned)
+
+		. = ALIGN(4);
+		__sbss_l2 = .;
+		*(.l1.bss)
+		. = ALIGN(4);
+		__ebss_l2 = .;
+	}
+#endif
+
 	/* Force trailing alignment of our init section so that when we
 	 * free our init memory, we don't leave behind a partial page.
 	 */
diff --git a/arch/blackfin/mach-bf527/boards/Kconfig b/arch/blackfin/mach-bf527/boards/Kconfig
index 6a570ad03746..8bf9e58f0148 100644
--- a/arch/blackfin/mach-bf527/boards/Kconfig
+++ b/arch/blackfin/mach-bf527/boards/Kconfig
@@ -9,4 +9,9 @@ config BFIN527_EZKIT
 	help
 	  BF527-EZKIT-LITE board support.
 
+config BFIN527_BLUETECHNIX_CM
+	bool "Bluetechnix CM-BF527"
+	help
+	  CM-BF527 support for EVAL- and DEV-Board.
+
 endchoice
diff --git a/arch/blackfin/mach-bf527/boards/Makefile b/arch/blackfin/mach-bf527/boards/Makefile
index 7277d35ef111..7ba7d256bbb8 100644
--- a/arch/blackfin/mach-bf527/boards/Makefile
+++ b/arch/blackfin/mach-bf527/boards/Makefile
@@ -3,3 +3,4 @@
 #
 
 obj-$(CONFIG_BFIN527_EZKIT)            += ezkit.o
+obj-$(CONFIG_BFIN527_BLUETECHNIX_CM)   += cm_bf527.o
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
new file mode 100644
index 000000000000..0b26ae2de5ee
--- /dev/null
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -0,0 +1,1011 @@
+/*
+ * File:         arch/blackfin/mach-bf527/boards/cm-bf527.c
+ * Based on:     arch/blackfin/mach-bf537/boards/stamp.c
+ * Author:       Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ *               Copyright 2005 National ICT Australia (NICTA)
+ *               Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/etherdevice.h>
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+#include <linux/usb/isp1362.h>
+#endif
+#include <linux/pata_platform.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/usb/sl811.h>
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+#include <linux/usb/musb.h>
+#endif
+#include <asm/cplb.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/reboot.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+#include <linux/spi/ad7877.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "Bluetechnix CM-BF527";
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+
+#define ISP1761_BASE       0x203C0000
+#define ISP1761_IRQ        IRQ_PF7
+
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+static struct resource bfin_isp1761_resources[] = {
+	[0] = {
+		.name	= "isp1761-regs",
+		.start  = ISP1761_BASE + 0x00000000,
+		.end    = ISP1761_BASE + 0x000fffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = ISP1761_IRQ,
+		.end    = ISP1761_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_isp1761_device = {
+	.name           = "isp1761",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(bfin_isp1761_resources),
+	.resource       = bfin_isp1761_resources,
+};
+
+static struct platform_device *bfin_isp1761_devices[] = {
+	&bfin_isp1761_device,
+};
+
+int __init bfin_isp1761_init(void)
+{
+	unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
+
+	return platform_add_devices(bfin_isp1761_devices, num_devices);
+}
+
+void __exit bfin_isp1761_exit(void)
+{
+	platform_device_unregister(&bfin_isp1761_device);
+}
+
+arch_initcall(bfin_isp1761_init);
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+static struct resource musb_resources[] = {
+	[0] = {
+		.start	= 0xffc03800,
+		.end	= 0xffc03cff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* general IRQ */
+		.start	= IRQ_USB_INT0,
+		.end	= IRQ_USB_INT0,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+	[2] = {	/* DMA IRQ */
+		.start	= IRQ_USB_DMA,
+		.end	= IRQ_USB_DMA,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_USB_MUSB_OTG)
+	.mode		= MUSB_OTG,
+#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+	.mode		= MUSB_HOST,
+#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
+	.mode		= MUSB_PERIPHERAL,
+#endif
+	.multipoint	= 0,
+};
+
+static u64 musb_dmamask = ~(u32)0;
+
+static struct platform_device musb_device = {
+	.name		= "musb_hdrc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &musb_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &musb_plat,
+	},
+	.num_resources	= ARRAY_SIZE(musb_resources),
+	.resource	= musb_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezkit_partitions[] = {
+	{
+		.name       = "Bootloader",
+		.size       = 0x40000,
+		.offset     = 0,
+	}, {
+		.name       = "Kernel",
+		.size       = 0x1C0000,
+		.offset     = MTDPART_OFS_APPEND,
+	}, {
+		.name       = "RootFS",
+		.size       = MTDPART_SIZ_FULL,
+		.offset     = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct physmap_flash_data ezkit_flash_data = {
+	.width      = 2,
+	.parts      = ezkit_partitions,
+	.nr_parts   = ARRAY_SIZE(ezkit_partitions),
+};
+
+static struct resource ezkit_flash_resource = {
+	.start = 0x20000000,
+	.end   = 0x201fffff,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ezkit_flash_device = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev = {
+		.platform_data = &ezkit_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &ezkit_flash_resource,
+};
+#endif
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+static struct mtd_partition partition_info[] = {
+	{
+		.name = "Linux Kernel",
+		.offset = 0,
+		.size = 4 * SIZE_1M,
+	},
+	{
+		.name = "File System",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct bf5xx_nand_platform bf5xx_nand_platform = {
+	.page_size = NFC_PG_SIZE_256,
+	.data_width = NFC_NWIDTH_8,
+	.partitions = partition_info,
+	.nr_partitions = ARRAY_SIZE(partition_info),
+	.rd_dly = 3,
+	.wr_dly = 3,
+};
+
+static struct resource bf5xx_nand_resources[] = {
+	{
+		.start = NFC_CTL,
+		.end = NFC_DATA_RD + 2,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = CH_NFC,
+		.end = CH_NFC,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bf5xx_nand_device = {
+	.name = "bf5xx-nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bf5xx_nand_resources),
+	.resource = bf5xx_nand_resources,
+	.dev = {
+		.platform_data = &bf5xx_nand_platform,
+	},
+};
+#endif
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+static struct resource bfin_pcmcia_cf_resources[] = {
+	{
+		.start = 0x20310000, /* IO PORT */
+		.end = 0x20312000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20311000, /* Attribute Memory */
+		.end = 0x20311FFF,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF4,
+		.end = IRQ_PF4,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	}, {
+		.start = 6, /* Card Detect PF6 */
+		.end = 6,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pcmcia_cf_device = {
+	.name = "bfin_cf_pcmcia",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
+	.resource = bfin_pcmcia_cf_resources,
+};
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= 0x203FB800,
+		.end	= 0x203FB800 + 8,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_PF9,
+		.end	= IRQ_PF9,
+		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+	},
+};
+
+static struct platform_device dm9000_device = {
+	.name		= "dm9000",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+static struct resource sl811_hcd_resources[] = {
+	{
+		.start = 0x20340000,
+		.end = 0x20340000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20340004,
+		.end = 0x20340004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = CONFIG_USB_SL811_BFIN_IRQ,
+		.end = CONFIG_USB_SL811_BFIN_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+void sl811_port_power(struct device *dev, int is_on)
+{
+	gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
+	gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
+}
+#endif
+
+static struct sl811_platform_data sl811_priv = {
+	.potpg = 10,
+	.power = 250,       /* == 500mA */
+#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
+	.port_power = &sl811_port_power,
+#endif
+};
+
+static struct platform_device sl811_hcd_device = {
+	.name = "sl811-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &sl811_priv,
+	},
+	.num_resources = ARRAY_SIZE(sl811_hcd_resources),
+	.resource = sl811_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+static struct resource isp1362_hcd_resources[] = {
+	{
+		.start = 0x20360000,
+		.end = 0x20360000,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = 0x20360004,
+		.end = 0x20360004,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+		.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct isp1362_platform_data isp1362_priv = {
+	.sel15Kres = 1,
+	.clknotstop = 0,
+	.oc_enable = 0,
+	.int_act_high = 0,
+	.int_edge_triggered = 0,
+	.remote_wakeup_connected = 0,
+	.no_power_switching = 1,
+	.power_switching_mode = 0,
+};
+
+static struct platform_device isp1362_hcd_device = {
+	.name = "isp1362-hcd",
+	.id = 0,
+	.dev = {
+		.platform_data = &isp1362_priv,
+	},
+	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
+	.resource = isp1362_hcd_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+static struct platform_device bfin_mac_device = {
+	.name = "bfin_mac",
+};
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+static struct resource net2272_bfin_resources[] = {
+	{
+		.start = 0x20300000,
+		.end = 0x20300000 + 0x100,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF7,
+		.end = IRQ_PF7,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device net2272_bfin_device = {
+	.name = "net2272",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
+	.resource = net2272_bfin_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p16",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+/* SPI ADC chip */
+static struct bfin5xx_spi_chip spi_adc_chip_info = {
+	.enable_dma = 1,         /* use dma transfer with this chip*/
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+	.enable_dma = 1,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_PBX)
+static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
+	.ctl_reg	= 0x4, /* send zero */
+	.enable_dma	= 0,
+	.bits_per_word	= 8,
+	.cs_change_per_word = 1,
+};
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+
+static const struct ad7877_platform_data bfin_ad7877_ts_info = {
+	.model			= 7877,
+	.vref_delay_usecs	= 50,	/* internal, no capacitor */
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.pressure_max		= 1000,
+	.pressure_min		= 0,
+	.stopacq_polarity 	= 1,
+	.first_conversion_delay = 3,
+	.acquisition_time 	= 1,
+	.averaging 		= 1,
+	.pen_down_acc_interval 	= 1,
+};
+#endif
+
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 16,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) \
+	|| defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_ADC_BF533) \
+	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+	{
+		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
+		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 1, /* Framework chip select. */
+		.platform_data = NULL, /* No spi_driver specific config */
+		.controller_data = &spi_adc_chip_info,
+	},
+#endif
+
+#if defined(CONFIG_SND_BLACKFIN_AD1836) \
+	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
+	{
+		.modalias = "ad1836-spi",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
+		.controller_data = &ad1836_spi_chip_info,
+	},
+#endif
+#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
+	{
+		.modalias = "ad9960-spi",
+		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &ad9960_spi_chip_info,
+	},
+#endif
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+	{
+		.modalias = "spi_mmc_dummy",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 0,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+	{
+		.modalias = "spi_mmc",
+		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_PBX)
+	{
+		.modalias = "fxs-spi",
+		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 8 - CONFIG_J11_JUMPER,
+		.controller_data = &spi_si3xxx_chip_info,
+		.mode = SPI_MODE_3,
+	},
+	{
+		.modalias = "fxo-spi",
+		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 8 - CONFIG_J19_JUMPER,
+		.controller_data = &spi_si3xxx_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
+	{
+		.modalias		= "ad7877",
+		.platform_data		= &bfin_ad7877_ts_info,
+		.irq			= IRQ_PF8,
+		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select  = 2,
+		.controller_data = &spi_ad7877_chip_info,
+	},
+#endif
+#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
+	 && defined(CONFIG_SND_SOC_WM8731_SPI)
+	{
+		.modalias	= "wm8731",
+		.max_speed_hz	= 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num	= 0,
+		.chip_select    = 5,
+		.controller_data = &spi_wm8731_chip_info,
+		.mode = SPI_MODE_0,
+	},
+#endif
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 1,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+		},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+static struct platform_device bfin_fb_adv7393_device = {
+	.name = "bfin-adv7393",
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device bfin_uart_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart_resources),
+	.resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+#ifdef CONFIG_BFIN_SIR1
+	{
+		.start = 0xFFC02000,
+		.end = 0xFFC020FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir_resources),
+	.resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+static struct resource bfin_twi0_resource[] = {
+	[0] = {
+		.start = TWI0_REGBASE,
+		.end   = TWI0_REGBASE,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_TWI,
+		.end   = IRQ_TWI,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device i2c_bfin_twi_device = {
+	.name = "i2c-bfin-twi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
+	.resource = bfin_twi0_resource,
+};
+#endif
+
+#ifdef CONFIG_I2C_BOARDINFO
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
+		.type = "pcf8574_lcd",
+	},
+#endif
+#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
+	{
+		I2C_BOARD_INFO("pcf8574_keypad", 0x27),
+		.type = "pcf8574_keypad",
+		.irq = IRQ_PF8,
+	},
+#endif
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+};
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+#define PATA_INT	55
+
+static struct pata_platform_info bfin_pata_platform_data = {
+	.ioport_shift = 1,
+	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
+};
+
+static struct resource bfin_pata_resources[] = {
+	{
+		.start = 0x20314020,
+		.end = 0x2031403F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0x2031401C,
+		.end = 0x2031401F,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = PATA_INT,
+		.end = PATA_INT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_pata_device = {
+	.name = "pata_platform",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(bfin_pata_resources),
+	.resource = bfin_pata_resources,
+	.dev = {
+		.platform_data = &bfin_pata_platform_data,
+	}
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"},
+};
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_100, 400000000),
+	VRPAIR(VLEV_105, 426000000),
+	VRPAIR(VLEV_110, 500000000),
+	VRPAIR(VLEV_115, 533000000),
+	VRPAIR(VLEV_120, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
+	&bf5xx_nand_device,
+#endif
+
+#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
+	&bfin_pcmcia_cf_device,
+#endif
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
+	&sl811_hcd_device,
+#endif
+
+#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
+	&isp1362_hcd_device,
+#endif
+
+#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
+	&musb_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+	&dm9000_device,
+#endif
+
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
+	&bfin_mac_device,
+#endif
+
+#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
+	&net2272_bfin_device,
+#endif
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+	&bfin_fb_adv7393_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+	&bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+	&bfin_sir_device,
+#endif
+
+#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
+	&i2c_bfin_twi_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+	&bfin_sport0_uart_device,
+	&bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	&bfin_pata_device,
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+	&ezkit_flash_device,
+#endif
+
+	&bfin_gpios_device,
+};
+
+static int __init stamp_init(void)
+{
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+#ifdef CONFIG_I2C_BOARDINFO
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+#endif
+
+	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+
+#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
+	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
+#endif
+	return 0;
+}
+
+arch_initcall(stamp_init);
+
+void native_machine_restart(char *cmd)
+{
+	/* workaround reboot hang when booting from SPI */
+	if ((bfin_read_SYSCR() & 0x7) == 0x3)
+		bfin_gpio_reset_spi0_ssel1();
+}
+
+void bfin_get_ether_addr(char *addr)
+{
+	random_ether_addr(addr);
+	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
+}
+EXPORT_SYMBOL(bfin_get_ether_addr);
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 5958eecefcf1..689b69c98ee4 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -323,10 +323,15 @@ static struct platform_device smc91x_device = {
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 8,
+		.end	= 0x203FB800 + 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
+		.start	= 0x203FB800 + 4,
+		.end	= 0x203FB800 + 5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
 		.start	= IRQ_PF9,
 		.end	= IRQ_PF9,
 		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S
index 57bdb3ba2fed..fe05cc1ef174 100644
--- a/arch/blackfin/mach-bf527/head.S
+++ b/arch/blackfin/mach-bf527/head.S
@@ -32,7 +32,7 @@
 #include <asm/blackfin.h>
 #include <asm/trace.h>
 
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach-common/clocks.h>
 #include <asm/mach/mem_init.h>
 #endif
@@ -185,7 +185,7 @@ ENTRY(__start)
 
 	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
 	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 	call _start_dma_code;
 #endif
 
@@ -318,7 +318,7 @@ ENDPROC(_real_start)
 __FINIT
 
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 
 	/* Enable PHY CLK buffer output */
@@ -398,12 +398,6 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 7cc4864f6aaf..4103a97c1a70 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -65,10 +65,15 @@ static struct platform_device rtc_device = {
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x20300000,
-		.end	= 0x20300000 + 8,
+		.end	= 0x20300000 + 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
+		.start	= 0x20300000 + 4,
+		.end	= 0x20300000 + 5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
 		.start	= IRQ_PF10,
 		.end	= IRQ_PF10,
 		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
index 1295deac00a4..c671e8549b17 100644
--- a/arch/blackfin/mach-bf533/head.S
+++ b/arch/blackfin/mach-bf533/head.S
@@ -31,7 +31,7 @@
 #include <linux/init.h>
 #include <asm/blackfin.h>
 #include <asm/trace.h>
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach-common/clocks.h>
 #include <asm/mach/mem_init.h>
 #endif
@@ -186,7 +186,7 @@ ENTRY(__start)
 
 	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
 	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 	call _start_dma_code;
 #endif
 
@@ -319,7 +319,7 @@ ENDPROC(_real_start)
 __FINIT
 
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 	p0.h = hi(SIC_IWR);
 	p0.l = lo(SIC_IWR);
@@ -390,12 +390,6 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index 7d250828dad8..01b63e2ec18f 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -166,10 +166,15 @@ static struct platform_device smc91x_device = {
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 8,
+		.end	= 0x203FB800 + 1,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
+		.start	= 0x203FB800 + 4,
+		.end	= 0x203FB800 + 5,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
 		.start	= IRQ_PF9,
 		.end	= IRQ_PF9,
 		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 671f9d67f23a..6dbc76fb080b 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -29,9 +29,12 @@
  */
 
 #include <linux/device.h>
+#include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/plat-ram.h>
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
@@ -355,6 +358,84 @@ static struct platform_device net2272_bfin_device = {
 };
 #endif
 
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+#ifdef CONFIG_MTD_PARTITIONS
+const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
+
+static struct mtd_partition bfin_plat_nand_partitions[] = {
+	{
+		.name   = "linux kernel",
+		.size   = 0x400000,
+		.offset = 0,
+	}, {
+		.name   = "file system",
+		.size   = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	},
+};
+#endif
+
+#define BFIN_NAND_PLAT_CLE 2
+#define BFIN_NAND_PLAT_ALE 1
+static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE));
+	else
+		writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE));
+}
+
+#define BFIN_NAND_PLAT_READY GPIO_PF3
+static int bfin_plat_nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(BFIN_NAND_PLAT_READY);
+}
+
+static struct platform_nand_data bfin_plat_nand_data = {
+	.chip = {
+		.chip_delay = 30,
+#ifdef CONFIG_MTD_PARTITIONS
+		.part_probe_types = part_probes,
+		.partitions = bfin_plat_nand_partitions,
+		.nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions),
+#endif
+	},
+	.ctrl = {
+		.cmd_ctrl  = bfin_plat_nand_cmd_ctrl,
+		.dev_ready = bfin_plat_nand_dev_ready,
+	},
+};
+
+#define MAX(x, y) (x > y ? x : y)
+static struct resource bfin_plat_nand_resources = {
+	.start = 0x20212000,
+	.end   = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)),
+	.flags = IORESOURCE_IO,
+};
+
+static struct platform_device bfin_async_nand_device = {
+	.name = "gen_nand",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_plat_nand_resources,
+	.dev = {
+		.platform_data = &bfin_plat_nand_data,
+	},
+};
+
+static void bfin_plat_nand_init(void)
+{
+	gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat");
+}
+#else
+static void bfin_plat_nand_init(void) {}
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition stamp_partitions[] = {
 	{
@@ -780,7 +861,7 @@ static struct platform_device bfin_sport1_uart_device = {
 #endif
 
 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
+#define PATA_INT	IRQ_PF5
 
 static struct pata_platform_info bfin_pata_platform_data = {
 	.ioport_shift = 1,
@@ -922,6 +1003,10 @@ static struct platform_device *stamp_devices[] __initdata = {
 
 	&bfin_gpios_device,
 
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
+	&bfin_async_nand_device,
+#endif
+
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 	&stamp_flash_device,
 #endif
@@ -936,6 +1021,7 @@ static int __init stamp_init(void)
 				ARRAY_SIZE(bfin_i2c_board_info));
 #endif
 
+	bfin_plat_nand_init();
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
index 48cd58a410a0..6b019eaee0b6 100644
--- a/arch/blackfin/mach-bf537/head.S
+++ b/arch/blackfin/mach-bf537/head.S
@@ -32,7 +32,7 @@
 #include <asm/blackfin.h>
 #include <asm/trace.h>
 
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach-common/clocks.h>
 #include <asm/mach/mem_init.h>
 #endif
@@ -217,7 +217,7 @@ ENTRY(__start)
 
 	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
 	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 	call _start_dma_code;
 #endif
 
@@ -350,7 +350,7 @@ ENDPROC(_real_start)
 __FINIT
 
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 
 	/* Enable PHY CLK buffer output */
@@ -430,12 +430,6 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index af7c211a580e..166fa2201ee7 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -61,6 +61,49 @@ const char bfin_board_name[] = "ADSP-BF548-EZKIT";
  *  Driver needs to know address, irq and flag pin.
  */
 
+#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
+static struct resource bfin_isp1761_resources[] = {
+	[0] = {
+		.name	= "isp1761-regs",
+		.start  = 0x2C0C0000,
+		.end    = 0x2C0C0000 + 0xfffff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_PG7,
+		.end    = IRQ_PG7,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bfin_isp1761_device = {
+	.name           = "isp1761",
+	.id             = 0,
+	.num_resources  = ARRAY_SIZE(bfin_isp1761_resources),
+	.resource       = bfin_isp1761_resources,
+};
+
+static struct platform_device *bfin_isp1761_devices[] = {
+	&bfin_isp1761_device,
+};
+
+int __init bfin_isp1761_init(void)
+{
+	unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+	set_irq_type(bfin_isp1761_resources[1].start, IRQF_TRIGGER_FALLING);
+
+	return platform_add_devices(bfin_isp1761_devices, num_devices);
+}
+
+void __exit bfin_isp1761_exit(void)
+{
+	platform_device_unregister(&bfin_isp1761_device);
+}
+arch_initcall(bfin_isp1761_init);
+#endif
+
 #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE)
 
 #include <asm/mach/bf54x-lq043.h>
@@ -177,6 +220,7 @@ static struct resource bfin_uart_resources[] = {
 	{
 		.start = 0xFFC03100,
 		.end = 0xFFC031FF,
+		.flags = IORESOURCE_MEM,
 	},
 #endif
 };
diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S
index f7191141a3ce..06b9178cfcfe 100644
--- a/arch/blackfin/mach-bf548/head.S
+++ b/arch/blackfin/mach-bf548/head.S
@@ -31,7 +31,7 @@
 #include <linux/init.h>
 #include <asm/blackfin.h>
 #include <asm/trace.h>
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach-common/clocks.h>
 #include <asm/mach/mem_init.h>
 #endif
@@ -130,7 +130,7 @@ ENTRY(__start)
 
 	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
 	call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 	call _start_dma_code;
 #endif
 	/* Code for initializing Async memory banks */
@@ -288,7 +288,7 @@ ENDPROC(_real_start)
 __FINIT
 
 .section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
 
 	/* Enable PHY CLK buffer output */
diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S
index 5b8bd40851dd..cf1a2dff01e7 100644
--- a/arch/blackfin/mach-bf561/head.S
+++ b/arch/blackfin/mach-bf561/head.S
@@ -377,12 +377,6 @@ ENTRY(_start_dma_code)
 	w[p0] = r0.l;
 	ssync;
 
-	p0.l = LO(EBIU_SDBCTL);
-	p0.h = HI(EBIU_SDBCTL);     /* SDRAM Memory Bank Control Register */
-	r0 = mem_SDBCTL;
-	w[p0] = r0.l;
-	ssync;
-
 	P2.H = hi(EBIU_SDGCTL);
 	P2.L = lo(EBIU_SDGCTL);
 	R0 = [P2];
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index caaab49e9cfa..f9160d83b91f 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -53,9 +53,3 @@
 # endif
 
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
-
-#ifdef CONFIG_MEM_SIZE
-#if (CONFIG_MEM_SIZE % 4)
-#error "SDRAM mem size must be multible of 4MB"
-#endif
-#endif
diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S
index b7981d31c392..5e3f1d8a4fb8 100644
--- a/arch/blackfin/mach-common/dpmc_modes.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -7,7 +7,7 @@
 #include <linux/linkage.h>
 #include <asm/blackfin.h>
 #include <asm/mach/irq.h>
-
+#include <asm/dpmc.h>
 
 .section .l1.text
 
@@ -51,31 +51,32 @@ ENTRY(_sleep_mode)
 	RETS = [SP++];
 	( R7:0, P5:0 ) = [SP++];
 	RTS;
+ENDPROC(_sleep_mode)
 
 ENTRY(_hibernate_mode)
 	[--SP] = ( R7:0, P5:0 );
 	[--SP] =  RETS;
 
+	R3 = R0;
+	R0 = IWR_DISABLE_ALL;
+	R1 = IWR_DISABLE_ALL;
+	R2 = IWR_DISABLE_ALL;
 	call _set_sic_iwr;
+	call _set_dram_srfs;
+	SSYNC;
 
 	R0 = 0xFFFF (Z);
 	call _set_rtc_istat;
 
 	P0.H = hi(VR_CTL);
 	P0.L = lo(VR_CTL);
-	R1 = W[P0](z);
-	BITSET (R1, 8);
-	BITCLR (R1, 0);
-	BITCLR (R1, 1);
-	W[P0] = R1.L;
-	SSYNC;
 
+	W[P0] = R3.L;
 	CLI R2;
 	IDLE;
-
-	/* Actually, adding anything may not be necessary...SDRAM contents
-	 * are lost
-	 */
+.Lforever:
+	jump .Lforever;
+ENDPROC(_hibernate_mode)
 
 ENTRY(_deep_sleep)
 	[--SP] = ( R7:0, P5:0 );
@@ -131,6 +132,7 @@ ENTRY(_deep_sleep)
 	RETS = [SP++];
 	( R7:0, P5:0 ) = [SP++];
 	RTS;
+ENDPROC(_deep_sleep)
 
 ENTRY(_sleep_deeper)
 	[--SP] = ( R7:0, P5:0 );
@@ -232,53 +234,73 @@ ENTRY(_sleep_deeper)
 	RETS = [SP++];
 	( R7:0, P5:0 ) = [SP++];
 	RTS;
+ENDPROC(_sleep_deeper)
 
 ENTRY(_set_dram_srfs)
 	/*  set the dram to self refresh mode */
-#if defined(CONFIG_BF54x)
+	SSYNC;
+#if defined(EBIU_RSTCTL)	/* DDR */
 	P0.H = hi(EBIU_RSTCTL);
 	P0.L = lo(EBIU_RSTCTL);
 	R2 = [P0];
-	R3.H = hi(SRREQ);
-	R3.L = lo(SRREQ);
-#else
-	P0.H = hi(EBIU_SDGCTL);
+	BITSET(R2, 3); /* SRREQ enter self-refresh mode */
+	[P0] = R2;
+	SSYNC;
+1:
+	R2 = [P0];
+	CC = BITTST(R2, 4);
+	if !CC JUMP 1b;
+#else 				/* SDRAM */
 	P0.L = lo(EBIU_SDGCTL);
+	P0.H = hi(EBIU_SDGCTL);
 	R2 = [P0];
-	R3.H = hi(SRFS);
-	R3.L = lo(SRFS);
-#endif
-	R2 = R2|R3;
+	BITSET(R2, 24); /* SRFS enter self-refresh mode */
 	[P0] = R2;
-	ssync;
-#if defined(CONFIG_BF54x)
-.LSRR_MODE:
+	SSYNC;
+
+	P0.L = lo(EBIU_SDSTAT);
+	P0.H = hi(EBIU_SDSTAT);
+1:
+	R2 = w[P0];
+	SSYNC;
+	cc = BITTST(R2, 1); /* SDSRA poll self-refresh status */
+	if !cc jump 1b;
+
+	P0.L = lo(EBIU_SDGCTL);
+	P0.H = hi(EBIU_SDGCTL);
 	R2 = [P0];
-	CC = BITTST(R2, 4);
-	if !CC JUMP .LSRR_MODE;
+	BITCLR(R2, 0); /* SCTLE disable CLKOUT */
+	[P0] = R2;
 #endif
 	RTS;
+ENDPROC(_set_dram_srfs)
 
 ENTRY(_unset_dram_srfs)
 	/*  set the dram out of self refresh mode */
-#if defined(CONFIG_BF54x)
+#if defined(EBIU_RSTCTL)	/* DDR */
 	P0.H = hi(EBIU_RSTCTL);
 	P0.L = lo(EBIU_RSTCTL);
 	R2 = [P0];
-	R3.H = hi(SRREQ);
-	R3.L = lo(SRREQ);
-#else
+	BITCLR(R2, 3); /* clear SRREQ bit */
+	[P0] = R2;
+#elif defined(EBIU_SDGCTL)	/* SDRAM */
+
+	P0.L = lo(EBIU_SDGCTL); /* release CLKOUT from self-refresh */
+	P0.H = hi(EBIU_SDGCTL);
+	R2 = [P0];
+	BITSET(R2, 0); /* SCTLE enable CLKOUT */
+	[P0] = R2
+	SSYNC;
+
+	P0.L = lo(EBIU_SDGCTL); /* release SDRAM from self-refresh */
 	P0.H = hi(EBIU_SDGCTL);
-	P0.L = lo(EBIU_SDGCTL);
 	R2 = [P0];
-	R3.H = hi(SRFS);
-	R3.L = lo(SRFS);
+	BITCLR(R2, 24); /* clear SRFS bit */
+	[P0] = R2
 #endif
-	R3 = ~R3;
-	R2 = R2&R3;
-	[P0] = R2;
-	ssync;
+	SSYNC;
 	RTS;
+ENDPROC(_unset_dram_srfs)
 
 ENTRY(_set_sic_iwr)
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561)
@@ -300,6 +322,7 @@ ENTRY(_set_sic_iwr)
 
 	SSYNC;
 	RTS;
+ENDPROC(_set_sic_iwr)
 
 ENTRY(_set_rtc_istat)
 #ifndef CONFIG_BF561
@@ -307,8 +330,14 @@ ENTRY(_set_rtc_istat)
 	P0.L = lo(RTC_ISTAT);
 	w[P0] = R0.L;
 	SSYNC;
+#elif (ANOMALY_05000371)
+	nop;
+	nop;
+	nop;
+	nop;
 #endif
 	RTS;
+ENDPROC(_set_rtc_istat)
 
 ENTRY(_test_pll_locked)
 	P0.H = hi(PLL_STAT);
@@ -318,3 +347,509 @@ ENTRY(_test_pll_locked)
 	CC = BITTST(R0,5);
 	IF !CC JUMP 1b;
 	RTS;
+ENDPROC(_test_pll_locked)
+
+.section .text
+
+ENTRY(_do_hibernate)
+	[--SP] = ( R7:0, P5:0 );
+	[--SP] =  RETS;
+	/* Save System MMRs */
+	R2 = R0;
+	P0.H = hi(PLL_CTL);
+	P0.L = lo(PLL_CTL);
+
+#ifdef SIC_IMASK0
+	PM_SYS_PUSH(SIC_IMASK0)
+#endif
+#ifdef SIC_IMASK1
+	PM_SYS_PUSH(SIC_IMASK1)
+#endif
+#ifdef SIC_IMASK2
+	PM_SYS_PUSH(SIC_IMASK2)
+#endif
+#ifdef SIC_IMASK
+	PM_SYS_PUSH(SIC_IMASK)
+#endif
+#ifdef SICA_IMASK0
+	PM_SYS_PUSH(SICA_IMASK0)
+#endif
+#ifdef SICA_IMASK1
+	PM_SYS_PUSH(SICA_IMASK1)
+#endif
+#ifdef SIC_IAR2
+	PM_SYS_PUSH(SIC_IAR0)
+	PM_SYS_PUSH(SIC_IAR1)
+	PM_SYS_PUSH(SIC_IAR2)
+#endif
+#ifdef SIC_IAR3
+	PM_SYS_PUSH(SIC_IAR3)
+#endif
+#ifdef SIC_IAR4
+	PM_SYS_PUSH(SIC_IAR4)
+	PM_SYS_PUSH(SIC_IAR5)
+	PM_SYS_PUSH(SIC_IAR6)
+#endif
+#ifdef SIC_IAR7
+	PM_SYS_PUSH(SIC_IAR7)
+#endif
+#ifdef SIC_IAR8
+	PM_SYS_PUSH(SIC_IAR8)
+	PM_SYS_PUSH(SIC_IAR9)
+	PM_SYS_PUSH(SIC_IAR10)
+	PM_SYS_PUSH(SIC_IAR11)
+#endif
+
+#ifdef SICA_IAR0
+	PM_SYS_PUSH(SICA_IAR0)
+	PM_SYS_PUSH(SICA_IAR1)
+	PM_SYS_PUSH(SICA_IAR2)
+	PM_SYS_PUSH(SICA_IAR3)
+	PM_SYS_PUSH(SICA_IAR4)
+	PM_SYS_PUSH(SICA_IAR5)
+	PM_SYS_PUSH(SICA_IAR6)
+	PM_SYS_PUSH(SICA_IAR7)
+#endif
+
+#ifdef SIC_IWR
+	PM_SYS_PUSH(SIC_IWR)
+#endif
+#ifdef SIC_IWR0
+	PM_SYS_PUSH(SIC_IWR0)
+#endif
+#ifdef SIC_IWR1
+	PM_SYS_PUSH(SIC_IWR1)
+#endif
+#ifdef SIC_IWR2
+	PM_SYS_PUSH(SIC_IWR2)
+#endif
+#ifdef SICA_IWR0
+	PM_SYS_PUSH(SICA_IWR0)
+#endif
+#ifdef SICA_IWR1
+	PM_SYS_PUSH(SICA_IWR1)
+#endif
+
+#ifdef PINT0_ASSIGN
+	PM_SYS_PUSH(PINT0_ASSIGN)
+	PM_SYS_PUSH(PINT1_ASSIGN)
+	PM_SYS_PUSH(PINT2_ASSIGN)
+	PM_SYS_PUSH(PINT3_ASSIGN)
+#endif
+
+	PM_SYS_PUSH(EBIU_AMBCTL0)
+	PM_SYS_PUSH(EBIU_AMBCTL1)
+	PM_SYS_PUSH16(EBIU_AMGCTL)
+
+#ifdef EBIU_FCTL
+	PM_SYS_PUSH(EBIU_MBSCTL)
+	PM_SYS_PUSH(EBIU_MODE)
+	PM_SYS_PUSH(EBIU_FCTL)
+#endif
+
+	PM_SYS_PUSH16(SYSCR)
+
+	/* Save Core MMRs */
+	P0.H = hi(SRAM_BASE_ADDRESS);
+	P0.L = lo(SRAM_BASE_ADDRESS);
+
+	PM_PUSH(DMEM_CONTROL)
+	PM_PUSH(DCPLB_ADDR0)
+	PM_PUSH(DCPLB_ADDR1)
+	PM_PUSH(DCPLB_ADDR2)
+	PM_PUSH(DCPLB_ADDR3)
+	PM_PUSH(DCPLB_ADDR4)
+	PM_PUSH(DCPLB_ADDR5)
+	PM_PUSH(DCPLB_ADDR6)
+	PM_PUSH(DCPLB_ADDR7)
+	PM_PUSH(DCPLB_ADDR8)
+	PM_PUSH(DCPLB_ADDR9)
+	PM_PUSH(DCPLB_ADDR10)
+	PM_PUSH(DCPLB_ADDR11)
+	PM_PUSH(DCPLB_ADDR12)
+	PM_PUSH(DCPLB_ADDR13)
+	PM_PUSH(DCPLB_ADDR14)
+	PM_PUSH(DCPLB_ADDR15)
+	PM_PUSH(DCPLB_DATA0)
+	PM_PUSH(DCPLB_DATA1)
+	PM_PUSH(DCPLB_DATA2)
+	PM_PUSH(DCPLB_DATA3)
+	PM_PUSH(DCPLB_DATA4)
+	PM_PUSH(DCPLB_DATA5)
+	PM_PUSH(DCPLB_DATA6)
+	PM_PUSH(DCPLB_DATA7)
+	PM_PUSH(DCPLB_DATA8)
+	PM_PUSH(DCPLB_DATA9)
+	PM_PUSH(DCPLB_DATA10)
+	PM_PUSH(DCPLB_DATA11)
+	PM_PUSH(DCPLB_DATA12)
+	PM_PUSH(DCPLB_DATA13)
+	PM_PUSH(DCPLB_DATA14)
+	PM_PUSH(DCPLB_DATA15)
+	PM_PUSH(IMEM_CONTROL)
+	PM_PUSH(ICPLB_ADDR0)
+	PM_PUSH(ICPLB_ADDR1)
+	PM_PUSH(ICPLB_ADDR2)
+	PM_PUSH(ICPLB_ADDR3)
+	PM_PUSH(ICPLB_ADDR4)
+	PM_PUSH(ICPLB_ADDR5)
+	PM_PUSH(ICPLB_ADDR6)
+	PM_PUSH(ICPLB_ADDR7)
+	PM_PUSH(ICPLB_ADDR8)
+	PM_PUSH(ICPLB_ADDR9)
+	PM_PUSH(ICPLB_ADDR10)
+	PM_PUSH(ICPLB_ADDR11)
+	PM_PUSH(ICPLB_ADDR12)
+	PM_PUSH(ICPLB_ADDR13)
+	PM_PUSH(ICPLB_ADDR14)
+	PM_PUSH(ICPLB_ADDR15)
+	PM_PUSH(ICPLB_DATA0)
+	PM_PUSH(ICPLB_DATA1)
+	PM_PUSH(ICPLB_DATA2)
+	PM_PUSH(ICPLB_DATA3)
+	PM_PUSH(ICPLB_DATA4)
+	PM_PUSH(ICPLB_DATA5)
+	PM_PUSH(ICPLB_DATA6)
+	PM_PUSH(ICPLB_DATA7)
+	PM_PUSH(ICPLB_DATA8)
+	PM_PUSH(ICPLB_DATA9)
+	PM_PUSH(ICPLB_DATA10)
+	PM_PUSH(ICPLB_DATA11)
+	PM_PUSH(ICPLB_DATA12)
+	PM_PUSH(ICPLB_DATA13)
+	PM_PUSH(ICPLB_DATA14)
+	PM_PUSH(ICPLB_DATA15)
+	PM_PUSH(EVT0)
+	PM_PUSH(EVT1)
+	PM_PUSH(EVT2)
+	PM_PUSH(EVT3)
+	PM_PUSH(EVT4)
+	PM_PUSH(EVT5)
+	PM_PUSH(EVT6)
+	PM_PUSH(EVT7)
+	PM_PUSH(EVT8)
+	PM_PUSH(EVT9)
+	PM_PUSH(EVT10)
+	PM_PUSH(EVT11)
+	PM_PUSH(EVT12)
+	PM_PUSH(EVT13)
+	PM_PUSH(EVT14)
+	PM_PUSH(EVT15)
+	PM_PUSH(IMASK)
+	PM_PUSH(ILAT)
+	PM_PUSH(IPRIO)
+	PM_PUSH(TCNTL)
+	PM_PUSH(TPERIOD)
+	PM_PUSH(TSCALE)
+	PM_PUSH(TCOUNT)
+	PM_PUSH(TBUFCTL)
+
+	/* Save Core Registers */
+	[--sp] = SYSCFG;
+	[--sp] = ( R7:0, P5:0 );
+	[--sp] = fp;
+	[--sp] = usp;
+
+	[--sp] = i0;
+	[--sp] = i1;
+	[--sp] = i2;
+	[--sp] = i3;
+
+	[--sp] = m0;
+	[--sp] = m1;
+	[--sp] = m2;
+	[--sp] = m3;
+
+	[--sp] = l0;
+	[--sp] = l1;
+	[--sp] = l2;
+	[--sp] = l3;
+
+	[--sp] = b0;
+	[--sp] = b1;
+	[--sp] = b2;
+	[--sp] = b3;
+	[--sp] = a0.x;
+	[--sp] = a0.w;
+	[--sp] = a1.x;
+	[--sp] = a1.w;
+
+	[--sp] = LC0;
+	[--sp] = LC1;
+	[--sp] = LT0;
+	[--sp] = LT1;
+	[--sp] = LB0;
+	[--sp] = LB1;
+
+	[--sp] = ASTAT;
+	[--sp] = CYCLES;
+	[--sp] = CYCLES2;
+
+	[--sp] = RETS;
+	r0 = RETI;
+	[--sp] = r0;
+	[--sp] = RETX;
+	[--sp] = RETN;
+	[--sp] = RETE;
+	[--sp] = SEQSTAT;
+
+	/* Save Magic, return address and Stack Pointer */
+	P0.H = 0;
+	P0.L = 0;
+	R0.H = 0xDEAD;	/* Hibernate Magic */
+	R0.L = 0xBEEF;
+	[P0++] = R0;	/* Store Hibernate Magic */
+	R0.H = .Lpm_resume_here;
+	R0.L = .Lpm_resume_here;
+	[P0++] = R0;	/* Save Return Address */
+	[P0++] = SP;	/* Save Stack Pointer */
+	P0.H = _hibernate_mode;
+	P0.L = _hibernate_mode;
+	R0 = R2;
+	call (P0); /* Goodbye */
+
+.Lpm_resume_here:
+
+	/* Restore Core Registers */
+	SEQSTAT = [sp++];
+	RETE = [sp++];
+	RETN = [sp++];
+	RETX = [sp++];
+	r0 = [sp++];
+	RETI = r0;
+	RETS = [sp++];
+
+	CYCLES2 = [sp++];
+	CYCLES = [sp++];
+	ASTAT = [sp++];
+
+	LB1 = [sp++];
+	LB0 = [sp++];
+	LT1 = [sp++];
+	LT0 = [sp++];
+	LC1 = [sp++];
+	LC0 = [sp++];
+
+	a1.w = [sp++];
+	a1.x = [sp++];
+	a0.w = [sp++];
+	a0.x = [sp++];
+	b3 = [sp++];
+	b2 = [sp++];
+	b1 = [sp++];
+	b0 = [sp++];
+
+	l3 = [sp++];
+	l2 = [sp++];
+	l1 = [sp++];
+	l0 = [sp++];
+
+	m3 = [sp++];
+	m2 = [sp++];
+	m1 = [sp++];
+	m0 = [sp++];
+
+	i3 = [sp++];
+	i2 = [sp++];
+	i1 = [sp++];
+	i0 = [sp++];
+
+	usp = [sp++];
+	fp = [sp++];
+
+	( R7 : 0, P5 : 0) = [ SP ++ ];
+	SYSCFG = [sp++];
+
+	/* Restore Core MMRs */
+
+	PM_POP(TBUFCTL)
+	PM_POP(TCOUNT)
+	PM_POP(TSCALE)
+	PM_POP(TPERIOD)
+	PM_POP(TCNTL)
+	PM_POP(IPRIO)
+	PM_POP(ILAT)
+	PM_POP(IMASK)
+	PM_POP(EVT15)
+	PM_POP(EVT14)
+	PM_POP(EVT13)
+	PM_POP(EVT12)
+	PM_POP(EVT11)
+	PM_POP(EVT10)
+	PM_POP(EVT9)
+	PM_POP(EVT8)
+	PM_POP(EVT7)
+	PM_POP(EVT6)
+	PM_POP(EVT5)
+	PM_POP(EVT4)
+	PM_POP(EVT3)
+	PM_POP(EVT2)
+	PM_POP(EVT1)
+	PM_POP(EVT0)
+	PM_POP(ICPLB_DATA15)
+	PM_POP(ICPLB_DATA14)
+	PM_POP(ICPLB_DATA13)
+	PM_POP(ICPLB_DATA12)
+	PM_POP(ICPLB_DATA11)
+	PM_POP(ICPLB_DATA10)
+	PM_POP(ICPLB_DATA9)
+	PM_POP(ICPLB_DATA8)
+	PM_POP(ICPLB_DATA7)
+	PM_POP(ICPLB_DATA6)
+	PM_POP(ICPLB_DATA5)
+	PM_POP(ICPLB_DATA4)
+	PM_POP(ICPLB_DATA3)
+	PM_POP(ICPLB_DATA2)
+	PM_POP(ICPLB_DATA1)
+	PM_POP(ICPLB_DATA0)
+	PM_POP(ICPLB_ADDR15)
+	PM_POP(ICPLB_ADDR14)
+	PM_POP(ICPLB_ADDR13)
+	PM_POP(ICPLB_ADDR12)
+	PM_POP(ICPLB_ADDR11)
+	PM_POP(ICPLB_ADDR10)
+	PM_POP(ICPLB_ADDR9)
+	PM_POP(ICPLB_ADDR8)
+	PM_POP(ICPLB_ADDR7)
+	PM_POP(ICPLB_ADDR6)
+	PM_POP(ICPLB_ADDR5)
+	PM_POP(ICPLB_ADDR4)
+	PM_POP(ICPLB_ADDR3)
+	PM_POP(ICPLB_ADDR2)
+	PM_POP(ICPLB_ADDR1)
+	PM_POP(ICPLB_ADDR0)
+	PM_POP(IMEM_CONTROL)
+	PM_POP(DCPLB_DATA15)
+	PM_POP(DCPLB_DATA14)
+	PM_POP(DCPLB_DATA13)
+	PM_POP(DCPLB_DATA12)
+	PM_POP(DCPLB_DATA11)
+	PM_POP(DCPLB_DATA10)
+	PM_POP(DCPLB_DATA9)
+	PM_POP(DCPLB_DATA8)
+	PM_POP(DCPLB_DATA7)
+	PM_POP(DCPLB_DATA6)
+	PM_POP(DCPLB_DATA5)
+	PM_POP(DCPLB_DATA4)
+	PM_POP(DCPLB_DATA3)
+	PM_POP(DCPLB_DATA2)
+	PM_POP(DCPLB_DATA1)
+	PM_POP(DCPLB_DATA0)
+	PM_POP(DCPLB_ADDR15)
+	PM_POP(DCPLB_ADDR14)
+	PM_POP(DCPLB_ADDR13)
+	PM_POP(DCPLB_ADDR12)
+	PM_POP(DCPLB_ADDR11)
+	PM_POP(DCPLB_ADDR10)
+	PM_POP(DCPLB_ADDR9)
+	PM_POP(DCPLB_ADDR8)
+	PM_POP(DCPLB_ADDR7)
+	PM_POP(DCPLB_ADDR6)
+	PM_POP(DCPLB_ADDR5)
+	PM_POP(DCPLB_ADDR4)
+	PM_POP(DCPLB_ADDR3)
+	PM_POP(DCPLB_ADDR2)
+	PM_POP(DCPLB_ADDR1)
+	PM_POP(DCPLB_ADDR0)
+	PM_POP(DMEM_CONTROL)
+
+	/* Restore System MMRs */
+
+	P0.H = hi(PLL_CTL);
+	P0.L = lo(PLL_CTL);
+	PM_SYS_POP16(SYSCR)
+
+#ifdef EBIU_FCTL
+	PM_SYS_POP(EBIU_FCTL)
+	PM_SYS_POP(EBIU_MODE)
+	PM_SYS_POP(EBIU_MBSCTL)
+#endif
+	PM_SYS_POP16(EBIU_AMGCTL)
+	PM_SYS_POP(EBIU_AMBCTL1)
+	PM_SYS_POP(EBIU_AMBCTL0)
+
+#ifdef PINT0_ASSIGN
+	PM_SYS_POP(PINT3_ASSIGN)
+	PM_SYS_POP(PINT2_ASSIGN)
+	PM_SYS_POP(PINT1_ASSIGN)
+	PM_SYS_POP(PINT0_ASSIGN)
+#endif
+
+#ifdef SICA_IWR1
+	PM_SYS_POP(SICA_IWR1)
+#endif
+#ifdef SICA_IWR0
+	PM_SYS_POP(SICA_IWR0)
+#endif
+#ifdef SIC_IWR2
+	PM_SYS_POP(SIC_IWR2)
+#endif
+#ifdef SIC_IWR1
+	PM_SYS_POP(SIC_IWR1)
+#endif
+#ifdef SIC_IWR0
+	PM_SYS_POP(SIC_IWR0)
+#endif
+#ifdef SIC_IWR
+	PM_SYS_POP(SIC_IWR)
+#endif
+
+#ifdef SICA_IAR0
+	PM_SYS_POP(SICA_IAR7)
+	PM_SYS_POP(SICA_IAR6)
+	PM_SYS_POP(SICA_IAR5)
+	PM_SYS_POP(SICA_IAR4)
+	PM_SYS_POP(SICA_IAR3)
+	PM_SYS_POP(SICA_IAR2)
+	PM_SYS_POP(SICA_IAR1)
+	PM_SYS_POP(SICA_IAR0)
+#endif
+
+#ifdef SIC_IAR8
+	PM_SYS_POP(SIC_IAR11)
+	PM_SYS_POP(SIC_IAR10)
+	PM_SYS_POP(SIC_IAR9)
+	PM_SYS_POP(SIC_IAR8)
+#endif
+#ifdef SIC_IAR7
+	PM_SYS_POP(SIC_IAR7)
+#endif
+#ifdef SIC_IAR6
+	PM_SYS_POP(SIC_IAR6)
+	PM_SYS_POP(SIC_IAR5)
+	PM_SYS_POP(SIC_IAR4)
+#endif
+#ifdef SIC_IAR3
+	PM_SYS_POP(SIC_IAR3)
+#endif
+#ifdef SIC_IAR2
+	PM_SYS_POP(SIC_IAR2)
+	PM_SYS_POP(SIC_IAR1)
+	PM_SYS_POP(SIC_IAR0)
+#endif
+#ifdef SICA_IMASK1
+	PM_SYS_POP(SICA_IMASK1)
+#endif
+#ifdef SICA_IMASK0
+	PM_SYS_POP(SICA_IMASK0)
+#endif
+#ifdef SIC_IMASK
+	PM_SYS_POP(SIC_IMASK)
+#endif
+#ifdef SIC_IMASK2
+	PM_SYS_POP(SIC_IMASK2)
+#endif
+#ifdef SIC_IMASK1
+	PM_SYS_POP(SIC_IMASK1)
+#endif
+#ifdef SIC_IMASK0
+	PM_SYS_POP(SIC_IMASK0)
+#endif
+
+	[--sp] = RETI;	/* Clear Global Interrupt Disable */
+	SP += 4;
+
+	RETS = [SP++];
+	( R7:0, P5:0 ) = [SP++];
+	RTS;
+ENDPROC(_do_hibernate)
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 038f70e0be65..eceb484d90f9 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -158,23 +158,45 @@ ENTRY(_ex_single_step)
 	cc = r7 == r6;
 	if cc jump _bfin_return_from_exception;
 
+	/* Don't do single step in hardware exception handler */
+        p5.l = lo(IPEND);
+        p5.h = hi(IPEND);
+	r6 = [p5];
+	cc = bittst(r6, 5);
+	if cc jump _bfin_return_from_exception;
+
+#ifdef CONFIG_KGDB
+	/* skip single step if current interrupt priority is higher than
+	 * that of the first instruction, from which gdb starts single step */
+	r6 >>= 6;
+	r7 = 10;
+.Lfind_priority_start:
+	cc = bittst(r6, 0);
+	if cc jump .Lfind_priority_done;
+	r6 >>= 1;
+	r7 += -1;
+	cc = r7 == 0;
+	if cc jump .Lfind_priority_done;
+	jump.s .Lfind_priority_start;
+.Lfind_priority_done:
+	p4.l = _debugger_step;
+	p4.h = _debugger_step;
+	r6 = [p4];
+	cc = r6 == 0;
+	if cc jump .Ldo_single_step;
+	r6 += -1;
+	cc = r6 < r7;
+	if cc jump _bfin_return_from_exception;
+.Ldo_single_step:
+#endif
+
 	/* If we were in user mode, do the single step normally.  */
-	p5.l = lo(IPEND);
-	p5.h = hi(IPEND);
 	r6 = [p5];
 	r7 = 0xffe0 (z);
 	r7 = r7 & r6;
 	cc = r7 == 0;
-	if !cc jump 1f;
-
-	/* Single stepping only a single instruction, so clear the trace
-	 * bit here.  */
-	r7 = syscfg;
-	bitclr (r7, 0);
-	syscfg = R7;
-	jump _ex_trap_c;
+	if cc jump 1f;
 
-1:
 	/*
 	 * We were in an interrupt handler.  By convention, all of them save
 	 * SYSCFG with their first instruction, so by checking whether our
@@ -202,11 +224,15 @@ ENTRY(_ex_single_step)
 	cc = R7 == R6;
 	if !cc jump _bfin_return_from_exception;
 
+1:
+	/* Single stepping only a single instruction, so clear the trace
+	 * bit here.  */
 	r7 = syscfg;
 	bitclr (r7, 0);
 	syscfg = R7;
 
-	/* Fall through to _bfin_return_from_exception.  */
+	jump _ex_trap_c;
+
 ENDPROC(_ex_single_step)
 
 ENTRY(_bfin_return_from_exception)
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index f5fd768022ea..64d746114e4b 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -459,6 +459,8 @@ static struct irq_chip bfin_gpio_irqchip = {
 	.mask = bfin_gpio_mask_irq,
 	.mask_ack = bfin_gpio_mask_ack_irq,
 	.unmask = bfin_gpio_unmask_irq,
+	.disable = bfin_gpio_mask_irq,
+	.enable = bfin_gpio_unmask_irq,
 	.set_type = bfin_gpio_irq_type,
 	.startup = bfin_gpio_irq_startup,
 	.shutdown = bfin_gpio_irq_shutdown,
@@ -846,6 +848,8 @@ static struct irq_chip bfin_gpio_irqchip = {
 	.mask = bfin_gpio_mask_irq,
 	.mask_ack = bfin_gpio_mask_ack_irq,
 	.unmask = bfin_gpio_unmask_irq,
+	.disable = bfin_gpio_mask_irq,
+	.enable = bfin_gpio_unmask_irq,
 	.set_type = bfin_gpio_irq_type,
 	.startup = bfin_gpio_irq_startup,
 	.shutdown = bfin_gpio_irq_shutdown,
diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c
index 0be805ca423f..4fe6a2366b13 100644
--- a/arch/blackfin/mach-common/pm.c
+++ b/arch/blackfin/mach-common/pm.c
@@ -38,8 +38,9 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 
-#include <asm/dpmc.h>
 #include <asm/gpio.h>
+#include <asm/dma.h>
+#include <asm/dpmc.h>
 
 #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H
 #define WAKEUP_TYPE	PM_WAKE_HIGH
@@ -61,16 +62,17 @@
 #define WAKEUP_TYPE	PM_WAKE_BOTH_EDGES
 #endif
 
+
 void bfin_pm_suspend_standby_enter(void)
 {
+	unsigned long flags;
+
 #ifdef CONFIG_PM_WAKEUP_BY_GPIO
 	gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE);
 #endif
 
-	u32 flags;
-
 	local_irq_save(flags);
-	bfin_pm_setup();
+	bfin_pm_standby_setup();
 
 #ifdef CONFIG_PM_BFIN_SLEEP_DEEPER
 	sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
@@ -78,7 +80,7 @@ void bfin_pm_suspend_standby_enter(void)
 	sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]);
 #endif
 
-	bfin_pm_restore();
+	bfin_pm_standby_restore();
 
 #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x)  || defined(CONFIG_BF561)
 	bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
@@ -93,6 +95,195 @@ void bfin_pm_suspend_standby_enter(void)
 	local_irq_restore(flags);
 }
 
+int bf53x_suspend_l1_mem(unsigned char *memptr)
+{
+	dma_memcpy(memptr, (const void *) L1_CODE_START, L1_CODE_LENGTH);
+	dma_memcpy(memptr + L1_CODE_LENGTH, (const void *) L1_DATA_A_START,
+			L1_DATA_A_LENGTH);
+	dma_memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH,
+			(const void *) L1_DATA_B_START, L1_DATA_B_LENGTH);
+	memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH +
+			L1_DATA_B_LENGTH, (const void *) L1_SCRATCH_START,
+			L1_SCRATCH_LENGTH);
+
+	return 0;
+}
+
+int bf53x_resume_l1_mem(unsigned char *memptr)
+{
+	dma_memcpy((void *) L1_CODE_START, memptr, L1_CODE_LENGTH);
+	dma_memcpy((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH,
+			L1_DATA_A_LENGTH);
+	dma_memcpy((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH +
+			L1_DATA_A_LENGTH, L1_DATA_B_LENGTH);
+	memcpy((void *) L1_SCRATCH_START, memptr + L1_CODE_LENGTH +
+			L1_DATA_A_LENGTH + L1_DATA_B_LENGTH, L1_SCRATCH_LENGTH);
+
+	return 0;
+}
+
+#ifdef CONFIG_BFIN_WB
+static void flushinv_all_dcache(void)
+{
+	u32 way, bank, subbank, set;
+	u32 status, addr;
+	u32 dmem_ctl = bfin_read_DMEM_CONTROL();
+
+	for (bank = 0; bank < 2; ++bank) {
+		if (!(dmem_ctl & (1 << (DMC1_P - bank))))
+			continue;
+
+		for (way = 0; way < 2; ++way)
+			for (subbank = 0; subbank < 4; ++subbank)
+				for (set = 0; set < 64; ++set) {
+
+					bfin_write_DTEST_COMMAND(
+						way << 26 |
+						bank << 23 |
+						subbank << 16 |
+						set << 5
+					);
+					CSYNC();
+					status = bfin_read_DTEST_DATA0();
+
+					/* only worry about valid/dirty entries */
+					if ((status & 0x3) != 0x3)
+						continue;
+
+					/* construct the address using the tag */
+					addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5);
+
+					/* flush it */
+					__asm__ __volatile__("FLUSHINV[%0];" : : "a"(addr));
+				}
+	}
+}
+#endif
+
+static inline void dcache_disable(void)
+{
+#ifdef CONFIG_BFIN_DCACHE
+	unsigned long ctrl;
+
+#ifdef CONFIG_BFIN_WB
+	flushinv_all_dcache();
+#endif
+	SSYNC();
+	ctrl = bfin_read_DMEM_CONTROL();
+	ctrl &= ~ENDCPLB;
+	bfin_write_DMEM_CONTROL(ctrl);
+	SSYNC();
+#endif
+}
+
+static inline void dcache_enable(void)
+{
+#ifdef CONFIG_BFIN_DCACHE
+	unsigned long ctrl;
+	SSYNC();
+	ctrl = bfin_read_DMEM_CONTROL();
+	ctrl |= ENDCPLB;
+	bfin_write_DMEM_CONTROL(ctrl);
+	SSYNC();
+#endif
+}
+
+static inline void icache_disable(void)
+{
+#ifdef CONFIG_BFIN_ICACHE
+	unsigned long ctrl;
+	SSYNC();
+	ctrl = bfin_read_IMEM_CONTROL();
+	ctrl &= ~ENICPLB;
+	bfin_write_IMEM_CONTROL(ctrl);
+	SSYNC();
+#endif
+}
+
+static inline void icache_enable(void)
+{
+#ifdef CONFIG_BFIN_ICACHE
+	unsigned long ctrl;
+	SSYNC();
+	ctrl = bfin_read_IMEM_CONTROL();
+	ctrl |= ENICPLB;
+	bfin_write_IMEM_CONTROL(ctrl);
+	SSYNC();
+#endif
+}
+
+int bfin_pm_suspend_mem_enter(void)
+{
+	unsigned long flags;
+	int wakeup, ret;
+
+	unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH
+					 + L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH,
+					  GFP_KERNEL);
+
+	if (memptr == NULL) {
+		panic("bf53x_suspend_l1_mem malloc failed");
+		return -ENOMEM;
+	}
+
+	wakeup = bfin_read_VR_CTL() & ~FREQ;
+	wakeup |= SCKELOW;
+
+	/* FIXME: merge this somehow with set_irq_wake */
+#ifdef CONFIG_PM_BFIN_WAKE_RTC
+	wakeup |= WAKE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_PH6
+	wakeup |= PHYWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_CAN
+	wakeup |= CANWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_GP
+	wakeup |= GPWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_USB
+	wakeup |= USBWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_KEYPAD
+	wakeup |= KPADWE;
+#endif
+#ifdef CONFIG_PM_BFIN_WAKE_ROTARY
+	wakeup |= ROTWE;
+#endif
+
+	local_irq_save(flags);
+
+	ret = blackfin_dma_suspend();
+
+	if (ret) {
+		local_irq_restore(flags);
+		kfree(memptr);
+		return ret;
+	}
+
+	bfin_gpio_pm_hibernate_suspend();
+
+	dcache_disable();
+	icache_disable();
+	bf53x_suspend_l1_mem(memptr);
+
+	do_hibernate(wakeup);	/* Goodbye */
+
+	bf53x_resume_l1_mem(memptr);
+
+	icache_enable();
+	dcache_enable();
+
+	bfin_gpio_pm_hibernate_restore();
+	blackfin_dma_resume();
+
+	local_irq_restore(flags);
+	kfree(memptr);
+
+	return 0;
+}
+
 /*
  *	bfin_pm_valid - Tell the PM core that we only support the standby sleep
  *			state
@@ -101,7 +292,24 @@ void bfin_pm_suspend_standby_enter(void)
  */
 static int bfin_pm_valid(suspend_state_t state)
 {
-	return (state == PM_SUSPEND_STANDBY);
+	return (state == PM_SUSPEND_STANDBY
+#ifndef BF533_FAMILY
+	/*
+	 * On BF533/2/1:
+	 * If we enter Hibernate the SCKE Pin is driven Low,
+	 * so that the SDRAM enters Self Refresh Mode.
+	 * However when the reset sequence that follows hibernate
+	 * state is executed, SCKE is driven High, taking the
+	 * SDRAM out of Self Refresh.
+	 *
+	 * If you reconfigure and access the SDRAM "very quickly",
+	 * you are likely to avoid errors, otherwise the SDRAM
+	 * start losing its contents.
+	 * An external HW workaround is possible using logic gates.
+	 */
+	|| state == PM_SUSPEND_MEM
+#endif
+	);
 }
 
 /*
@@ -115,10 +323,9 @@ static int bfin_pm_enter(suspend_state_t state)
 	case PM_SUSPEND_STANDBY:
 		bfin_pm_suspend_standby_enter();
 		break;
-
 	case PM_SUSPEND_MEM:
-		return -ENOTSUPP;
-
+		bfin_pm_suspend_mem_enter();
+		break;
 	default:
 		return -EINVAL;
 	}
diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c
index 3246f91c7baa..5af3c31c9365 100644
--- a/arch/blackfin/mm/blackfin_sram.c
+++ b/arch/blackfin/mm/blackfin_sram.c
@@ -41,215 +41,309 @@
 #include <asm/blackfin.h>
 #include "blackfin_sram.h"
 
-spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
-
-#if CONFIG_L1_MAX_PIECE < 16
-#undef CONFIG_L1_MAX_PIECE
-#define CONFIG_L1_MAX_PIECE        16
-#endif
-
-#if CONFIG_L1_MAX_PIECE > 1024
-#undef CONFIG_L1_MAX_PIECE
-#define CONFIG_L1_MAX_PIECE        1024
-#endif
-
-#define SRAM_SLT_NULL      0
-#define SRAM_SLT_FREE      1
-#define SRAM_SLT_ALLOCATED 2
+static spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock;
+static spinlock_t l2_sram_lock;
 
 /* the data structure for L1 scratchpad and DATA SRAM */
-struct l1_sram_piece {
+struct sram_piece {
 	void *paddr;
 	int size;
-	int flag;
 	pid_t pid;
+	struct sram_piece *next;
 };
 
-static struct l1_sram_piece l1_ssram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_ssram_head, used_l1_ssram_head;
 
 #if L1_DATA_A_LENGTH != 0
-static struct l1_sram_piece l1_data_A_sram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_data_A_sram_head, used_l1_data_A_sram_head;
 #endif
 
 #if L1_DATA_B_LENGTH != 0
-static struct l1_sram_piece l1_data_B_sram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head;
 #endif
 
 #if L1_CODE_LENGTH != 0
-static struct l1_sram_piece l1_inst_sram[CONFIG_L1_MAX_PIECE];
+static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head;
+#endif
+
+#ifdef L2_LENGTH
+static struct sram_piece free_l2_sram_head, used_l2_sram_head;
 #endif
 
+static struct kmem_cache *sram_piece_cache;
+
 /* L1 Scratchpad SRAM initialization function */
-void __init l1sram_init(void)
+static void __init l1sram_init(void)
 {
-	printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
-	       L1_SCRATCH_LENGTH >> 10);
+	free_l1_ssram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_ssram_head.next) {
+		printk(KERN_INFO"Fail to initialize Scratchpad data SRAM.\n");
+		return;
+	}
+
+	free_l1_ssram_head.next->paddr = (void *)L1_SCRATCH_START;
+	free_l1_ssram_head.next->size = L1_SCRATCH_LENGTH;
+	free_l1_ssram_head.next->pid = 0;
+	free_l1_ssram_head.next->next = NULL;
 
-	memset(&l1_ssram, 0x00, sizeof(l1_ssram));
-	l1_ssram[0].paddr = (void *)L1_SCRATCH_START;
-	l1_ssram[0].size = L1_SCRATCH_LENGTH;
-	l1_ssram[0].flag = SRAM_SLT_FREE;
+	used_l1_ssram_head.next = NULL;
 
 	/* mutex initialize */
 	spin_lock_init(&l1sram_lock);
+
+	printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n",
+	       L1_SCRATCH_LENGTH >> 10);
 }
 
-void __init l1_data_sram_init(void)
+static void __init l1_data_sram_init(void)
 {
 #if L1_DATA_A_LENGTH != 0
-	memset(&l1_data_A_sram, 0x00, sizeof(l1_data_A_sram));
-	l1_data_A_sram[0].paddr = (void *)L1_DATA_A_START +
-					(_ebss_l1 - _sdata_l1);
-	l1_data_A_sram[0].size = L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
-	l1_data_A_sram[0].flag = SRAM_SLT_FREE;
-
-	printk(KERN_INFO "Blackfin Data A SRAM: %d KB (%d KB free)\n",
-	       L1_DATA_A_LENGTH >> 10, l1_data_A_sram[0].size >> 10);
+	free_l1_data_A_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_data_A_sram_head.next) {
+		printk(KERN_INFO"Fail to initialize L1 Data A SRAM.\n");
+		return;
+	}
+
+	free_l1_data_A_sram_head.next->paddr =
+		(void *)L1_DATA_A_START + (_ebss_l1 - _sdata_l1);
+	free_l1_data_A_sram_head.next->size =
+		L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1);
+	free_l1_data_A_sram_head.next->pid = 0;
+	free_l1_data_A_sram_head.next->next = NULL;
+
+	used_l1_data_A_sram_head.next = NULL;
+
+	printk(KERN_INFO "Blackfin L1 Data A SRAM: %d KB (%d KB free)\n",
+		L1_DATA_A_LENGTH >> 10,
+		free_l1_data_A_sram_head.next->size >> 10);
 #endif
 #if L1_DATA_B_LENGTH != 0
-	memset(&l1_data_B_sram, 0x00, sizeof(l1_data_B_sram));
-	l1_data_B_sram[0].paddr = (void *)L1_DATA_B_START +
-				(_ebss_b_l1 - _sdata_b_l1);
-	l1_data_B_sram[0].size = L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
-	l1_data_B_sram[0].flag = SRAM_SLT_FREE;
-
-	printk(KERN_INFO "Blackfin Data B SRAM: %d KB (%d KB free)\n",
-	       L1_DATA_B_LENGTH >> 10, l1_data_B_sram[0].size >> 10);
+	free_l1_data_B_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_data_B_sram_head.next) {
+		printk(KERN_INFO"Fail to initialize L1 Data B SRAM.\n");
+		return;
+	}
+
+	free_l1_data_B_sram_head.next->paddr =
+		(void *)L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1);
+	free_l1_data_B_sram_head.next->size =
+		L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1);
+	free_l1_data_B_sram_head.next->pid = 0;
+	free_l1_data_B_sram_head.next->next = NULL;
+
+	used_l1_data_B_sram_head.next = NULL;
+
+	printk(KERN_INFO "Blackfin L1 Data B SRAM: %d KB (%d KB free)\n",
+		L1_DATA_B_LENGTH >> 10,
+		free_l1_data_B_sram_head.next->size >> 10);
 #endif
 
 	/* mutex initialize */
 	spin_lock_init(&l1_data_sram_lock);
 }
 
-void __init l1_inst_sram_init(void)
+static void __init l1_inst_sram_init(void)
 {
 #if L1_CODE_LENGTH != 0
-	memset(&l1_inst_sram, 0x00, sizeof(l1_inst_sram));
-	l1_inst_sram[0].paddr = (void *)L1_CODE_START + (_etext_l1 - _stext_l1);
-	l1_inst_sram[0].size = L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
-	l1_inst_sram[0].flag = SRAM_SLT_FREE;
+	free_l1_inst_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l1_inst_sram_head.next) {
+		printk(KERN_INFO"Fail to initialize L1 Instruction SRAM.\n");
+		return;
+	}
 
-	printk(KERN_INFO "Blackfin Instruction SRAM: %d KB (%d KB free)\n",
-	       L1_CODE_LENGTH >> 10, l1_inst_sram[0].size >> 10);
+	free_l1_inst_sram_head.next->paddr =
+		(void *)L1_CODE_START + (_etext_l1 - _stext_l1);
+	free_l1_inst_sram_head.next->size =
+		L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
+	free_l1_inst_sram_head.next->pid = 0;
+	free_l1_inst_sram_head.next->next = NULL;
+
+	used_l1_inst_sram_head.next = NULL;
+
+	printk(KERN_INFO "Blackfin L1 Instruction SRAM: %d KB (%d KB free)\n",
+		L1_CODE_LENGTH >> 10,
+		free_l1_inst_sram_head.next->size >> 10);
 #endif
 
 	/* mutex initialize */
 	spin_lock_init(&l1_inst_sram_lock);
 }
 
-/* L1 memory allocate function */
-static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count)
+static void __init l2_sram_init(void)
 {
-	int i, index = 0;
-	void *addr = NULL;
+#ifdef L2_LENGTH
+	free_l2_sram_head.next =
+		kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+	if (!free_l2_sram_head.next) {
+		printk(KERN_INFO"Fail to initialize L2 SRAM.\n");
+		return;
+	}
 
-	if (size <= 0)
+	free_l2_sram_head.next->paddr = (void *)L2_START +
+		(_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
+	free_l2_sram_head.next->size = L2_LENGTH -
+		(_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2);
+	free_l2_sram_head.next->pid = 0;
+	free_l2_sram_head.next->next = NULL;
+
+	used_l2_sram_head.next = NULL;
+
+	printk(KERN_INFO "Blackfin L2 SRAM: %d KB (%d KB free)\n",
+		L2_LENGTH >> 10,
+		free_l2_sram_head.next->size >> 10);
+#endif
+
+	/* mutex initialize */
+	spin_lock_init(&l2_sram_lock);
+}
+void __init bfin_sram_init(void)
+{
+	sram_piece_cache = kmem_cache_create("sram_piece_cache",
+				sizeof(struct sram_piece),
+				0, SLAB_PANIC, NULL);
+
+	l1sram_init();
+	l1_data_sram_init();
+	l1_inst_sram_init();
+	l2_sram_init();
+}
+
+/* SRAM allocate function */
+static void *_sram_alloc(size_t size, struct sram_piece *pfree_head,
+		struct sram_piece *pused_head)
+{
+	struct sram_piece *pslot, *plast, *pavail;
+
+	if (size <= 0 || !pfree_head || !pused_head)
 		return NULL;
 
 	/* Align the size */
 	size = (size + 3) & ~3;
 
-	/* not use the good method to match the best slot !!! */
-	/* search an available memory slot */
-	for (i = 0; i < count; i++) {
-		if ((pfree[i].flag == SRAM_SLT_FREE)
-		    && (pfree[i].size >= size)) {
-			addr = pfree[i].paddr;
-			pfree[i].flag = SRAM_SLT_ALLOCATED;
-			pfree[i].pid = current->pid;
-			index = i;
-			break;
-		}
+	pslot = pfree_head->next;
+	plast = pfree_head;
+
+	/* search an available piece slot */
+	while (pslot != NULL && size > pslot->size) {
+		plast = pslot;
+		pslot = pslot->next;
 	}
-	if (i >= count)
+
+	if (!pslot)
 		return NULL;
 
-	/* updated the NULL memory slot !!! */
-	if (pfree[i].size > size) {
-		for (i = 0; i < count; i++) {
-			if (pfree[i].flag == SRAM_SLT_NULL) {
-				pfree[i].pid = 0;
-				pfree[i].flag = SRAM_SLT_FREE;
-				pfree[i].paddr = addr + size;
-				pfree[i].size = pfree[index].size - size;
-				pfree[index].size = size;
-				break;
-			}
-		}
+	if (pslot->size == size) {
+		plast->next = pslot->next;
+		pavail = pslot;
+	} else {
+		pavail = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL);
+
+		if (!pavail)
+			return NULL;
+
+		pavail->paddr = pslot->paddr;
+		pavail->size = size;
+		pslot->paddr += size;
+		pslot->size -= size;
 	}
 
-	return addr;
+	pavail->pid = current->pid;
+
+	pslot = pused_head->next;
+	plast = pused_head;
+
+	/* insert new piece into used piece list !!! */
+	while (pslot != NULL && pavail->paddr < pslot->paddr) {
+		plast = pslot;
+		pslot = pslot->next;
+	}
+
+	pavail->next = pslot;
+	plast->next = pavail;
+
+	return pavail->paddr;
 }
 
 /* Allocate the largest available block.  */
-static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count,
+static void *_sram_alloc_max(struct sram_piece *pfree_head,
+				struct sram_piece *pused_head,
 				unsigned long *psize)
 {
-	unsigned long best = 0;
-	int i, index = -1;
-	void *addr = NULL;
+	struct sram_piece *pslot, *pmax;
 
-	/* search an available memory slot */
-	for (i = 0; i < count; i++) {
-		if (pfree[i].flag == SRAM_SLT_FREE && pfree[i].size > best) {
-			addr = pfree[i].paddr;
-			index = i;
-			best = pfree[i].size;
-		}
+	if (!pfree_head || !pused_head)
+		return NULL;
+
+	pmax = pslot = pfree_head->next;
+
+	/* search an available piece slot */
+	while (pslot != NULL) {
+		if (pslot->size > pmax->size)
+			pmax = pslot;
+		pslot = pslot->next;
 	}
-	if (index < 0)
+
+	if (!pmax)
 		return NULL;
-	*psize = best;
 
-	pfree[index].pid = current->pid;
-	pfree[index].flag = SRAM_SLT_ALLOCATED;
-	return addr;
+	*psize = pmax->size;
+
+	return _sram_alloc(*psize, pfree_head, pused_head);
 }
 
-/* L1 memory free function */
-static int _l1_sram_free(const void *addr,
-			struct l1_sram_piece *pfree,
-			int count)
+/* SRAM free function */
+static int _sram_free(const void *addr,
+			struct sram_piece *pfree_head,
+			struct sram_piece *pused_head)
 {
-	int i, index = 0;
+	struct sram_piece *pslot, *plast, *pavail;
+
+	if (!pfree_head || !pused_head)
+		return -1;
 
 	/* search the relevant memory slot */
-	for (i = 0; i < count; i++) {
-		if (pfree[i].paddr == addr) {
-			if (pfree[i].flag != SRAM_SLT_ALLOCATED) {
-				/* error log */
-				return -1;
-			}
-			index = i;
-			break;
-		}
+	pslot = pused_head->next;
+	plast = pused_head;
+
+	/* search an available piece slot */
+	while (pslot != NULL && pslot->paddr != addr) {
+		plast = pslot;
+		pslot = pslot->next;
 	}
-	if (i >= count)
+
+	if (!pslot)
 		return -1;
 
-	pfree[index].pid = 0;
-	pfree[index].flag = SRAM_SLT_FREE;
-
-	/* link the next address slot */
-	for (i = 0; i < count; i++) {
-		if (((pfree[index].paddr + pfree[index].size) == pfree[i].paddr)
-		    && (pfree[i].flag == SRAM_SLT_FREE)) {
-			pfree[i].pid = 0;
-			pfree[i].flag = SRAM_SLT_NULL;
-			pfree[index].size += pfree[i].size;
-			pfree[index].flag = SRAM_SLT_FREE;
-			break;
-		}
+	plast->next = pslot->next;
+	pavail = pslot;
+	pavail->pid = 0;
+
+	/* insert free pieces back to the free list */
+	pslot = pfree_head->next;
+	plast = pfree_head;
+
+	while (pslot != NULL && addr > pslot->paddr) {
+		plast = pslot;
+		pslot = pslot->next;
+	}
+
+	if (plast != pfree_head && plast->paddr + plast->size == pavail->paddr) {
+		plast->size += pavail->size;
+		kmem_cache_free(sram_piece_cache, pavail);
+	} else {
+		pavail->next = plast;
+		plast->next = pavail;
+		plast = pavail;
 	}
 
-	/* link the last address slot */
-	for (i = 0; i < count; i++) {
-		if (((pfree[i].paddr + pfree[i].size) == pfree[index].paddr) &&
-		    (pfree[i].flag == SRAM_SLT_FREE)) {
-			pfree[index].flag = SRAM_SLT_NULL;
-			pfree[i].size += pfree[index].size;
-			break;
-		}
+	if (pslot && plast->paddr + plast->size == pslot->paddr) {
+		plast->size += pslot->size;
+		plast->next = pslot->next;
+		kmem_cache_free(sram_piece_cache, pslot);
 	}
 
 	return 0;
@@ -273,6 +367,11 @@ int sram_free(const void *addr)
 		 && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH))
 		return l1_data_B_sram_free(addr);
 #endif
+#ifdef L2_LENGTH
+	else if (addr >= (void *)L2_START
+		 && addr < (void *)(L2_START + L2_LENGTH))
+		return l2_sram_free(addr);
+#endif
 	else
 		return -1;
 }
@@ -287,7 +386,8 @@ void *l1_data_A_sram_alloc(size_t size)
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
 #if L1_DATA_A_LENGTH != 0
-	addr = _l1_sram_alloc(size, l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+	addr = _sram_alloc(size, &free_l1_data_A_sram_head,
+			&used_l1_data_A_sram_head);
 #endif
 
 	/* add mutex operation */
@@ -309,8 +409,8 @@ int l1_data_A_sram_free(const void *addr)
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
 #if L1_DATA_A_LENGTH != 0
-	ret = _l1_sram_free(addr,
-			   l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+	ret = _sram_free(addr, &free_l1_data_A_sram_head,
+			&used_l1_data_A_sram_head);
 #else
 	ret = -1;
 #endif
@@ -331,7 +431,8 @@ void *l1_data_B_sram_alloc(size_t size)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
-	addr = _l1_sram_alloc(size, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+	addr = _sram_alloc(size, &free_l1_data_B_sram_head,
+			&used_l1_data_B_sram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1_data_sram_lock, flags);
@@ -355,7 +456,8 @@ int l1_data_B_sram_free(const void *addr)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_data_sram_lock, flags);
 
-	ret = _l1_sram_free(addr, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+	ret = _sram_free(addr, &free_l1_data_B_sram_head,
+			&used_l1_data_B_sram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1_data_sram_lock, flags);
@@ -408,7 +510,8 @@ void *l1_inst_sram_alloc(size_t size)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_inst_sram_lock, flags);
 
-	addr = _l1_sram_alloc(size, l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+	addr = _sram_alloc(size, &free_l1_inst_sram_head,
+			&used_l1_inst_sram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
@@ -432,7 +535,8 @@ int l1_inst_sram_free(const void *addr)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1_inst_sram_lock, flags);
 
-	ret = _l1_sram_free(addr, l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+	ret = _sram_free(addr, &free_l1_inst_sram_head,
+			&used_l1_inst_sram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1_inst_sram_lock, flags);
@@ -453,7 +557,8 @@ void *l1sram_alloc(size_t size)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1sram_lock, flags);
 
-	addr = _l1_sram_alloc(size, l1_ssram, ARRAY_SIZE(l1_ssram));
+	addr = _sram_alloc(size, &free_l1_ssram_head,
+			&used_l1_ssram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1sram_lock, flags);
@@ -470,7 +575,8 @@ void *l1sram_alloc_max(size_t *psize)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1sram_lock, flags);
 
-	addr = _l1_sram_alloc_max(l1_ssram, ARRAY_SIZE(l1_ssram), psize);
+	addr = _sram_alloc_max(&free_l1_ssram_head,
+			&used_l1_ssram_head, psize);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1sram_lock, flags);
@@ -487,7 +593,8 @@ int l1sram_free(const void *addr)
 	/* add mutex operation */
 	spin_lock_irqsave(&l1sram_lock, flags);
 
-	ret = _l1_sram_free(addr, l1_ssram, ARRAY_SIZE(l1_ssram));
+	ret = _sram_free(addr, &free_l1_ssram_head,
+			&used_l1_ssram_head);
 
 	/* add mutex operation */
 	spin_unlock_irqrestore(&l1sram_lock, flags);
@@ -495,6 +602,64 @@ int l1sram_free(const void *addr)
 	return ret;
 }
 
+void *l2_sram_alloc(size_t size)
+{
+#ifdef L2_LENGTH
+	unsigned flags;
+	void *addr;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l2_sram_lock, flags);
+
+	addr = _sram_alloc(size, &free_l2_sram_head,
+			&used_l2_sram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l2_sram_lock, flags);
+
+	pr_debug("Allocated address in l2_sram_alloc is 0x%lx+0x%lx\n",
+		 (long unsigned int)addr, size);
+
+	return addr;
+#else
+	return NULL;
+#endif
+}
+EXPORT_SYMBOL(l2_sram_alloc);
+
+void *l2_sram_zalloc(size_t size)
+{
+	void *addr = l2_sram_alloc(size);
+
+	if (addr)
+		memset(addr, 0x00, size);
+
+	return addr;
+}
+EXPORT_SYMBOL(l2_sram_zalloc);
+
+int l2_sram_free(const void *addr)
+{
+#ifdef L2_LENGTH
+	unsigned flags;
+	int ret;
+
+	/* add mutex operation */
+	spin_lock_irqsave(&l2_sram_lock, flags);
+
+	ret = _sram_free(addr, &free_l2_sram_head,
+			&used_l2_sram_head);
+
+	/* add mutex operation */
+	spin_unlock_irqrestore(&l2_sram_lock, flags);
+
+	return ret;
+#else
+	return -1;
+#endif
+}
+EXPORT_SYMBOL(l2_sram_free);
+
 int sram_free_with_lsl(const void *addr)
 {
 	struct sram_list_struct *lsl, **tmp;
@@ -533,6 +698,9 @@ void *sram_alloc_with_lsl(size_t size, unsigned long flags)
 	if (addr == NULL && (flags & L1_DATA_B_SRAM))
 		addr = l1_data_B_sram_alloc(size);
 
+	if (addr == NULL && (flags & L2_SRAM))
+		addr = l2_sram_alloc(size);
+
 	if (addr == NULL) {
 		kfree(lsl);
 		return NULL;
@@ -549,49 +717,80 @@ EXPORT_SYMBOL(sram_alloc_with_lsl);
 /* Once we get a real allocator, we'll throw all of this away.
  * Until then, we need some sort of visibility into the L1 alloc.
  */
-static void _l1sram_proc_read(char *buf, int *len, const char *desc,
-		struct l1_sram_piece *pfree, const int array_size)
+/* Need to keep line of output the same.  Currently, that is 44 bytes
+ * (including newline).
+ */
+static int _sram_proc_read(char *buf, int *len, int count, const char *desc,
+		struct sram_piece *pfree_head,
+		struct sram_piece *pused_head)
 {
-	int i;
-
-	*len += sprintf(&buf[*len], "--- L1 %-14s Size  PID State\n", desc);
-	for (i = 0; i < array_size; ++i) {
-		const char *alloc_type;
-		switch (pfree[i].flag) {
-		case SRAM_SLT_NULL:      alloc_type = "NULL"; break;
-		case SRAM_SLT_FREE:      alloc_type = "FREE"; break;
-		case SRAM_SLT_ALLOCATED: alloc_type = "ALLOCATED"; break;
-		default:                 alloc_type = "????"; break;
-		}
-		*len += sprintf(&buf[*len], "%p-%p %8i %4i %s\n",
-			pfree[i].paddr, pfree[i].paddr + pfree[i].size,
-			pfree[i].size, pfree[i].pid, alloc_type);
+	struct sram_piece *pslot;
+
+	if (!pfree_head || !pused_head)
+		return -1;
+
+	*len += sprintf(&buf[*len], "--- SRAM %-14s Size   PID State     \n", desc);
+
+	/* search the relevant memory slot */
+	pslot = pused_head->next;
+
+	while (pslot != NULL) {
+		*len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
+			pslot->paddr, pslot->paddr + pslot->size,
+			pslot->size, pslot->pid, "ALLOCATED");
+
+		pslot = pslot->next;
 	}
+
+	pslot = pfree_head->next;
+
+	while (pslot != NULL) {
+		*len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n",
+			pslot->paddr, pslot->paddr + pslot->size,
+			pslot->size, pslot->pid, "FREE");
+
+		pslot = pslot->next;
+	}
+
+	return 0;
 }
-static int l1sram_proc_read(char *buf, char **start, off_t offset, int count,
+static int sram_proc_read(char *buf, char **start, off_t offset, int count,
 		int *eof, void *data)
 {
 	int len = 0;
 
-	_l1sram_proc_read(buf, &len, "Scratchpad",
-			l1_ssram, ARRAY_SIZE(l1_ssram));
+	if (_sram_proc_read(buf, &len, count, "Scratchpad",
+			&free_l1_ssram_head, &used_l1_ssram_head))
+		goto not_done;
 #if L1_DATA_A_LENGTH != 0
-	_l1sram_proc_read(buf, &len, "Data A",
-			l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram));
+	if (_sram_proc_read(buf, &len, count, "L1 Data A",
+			&free_l1_data_A_sram_head,
+			&used_l1_data_A_sram_head))
+		goto not_done;
 #endif
 #if L1_DATA_B_LENGTH != 0
-	_l1sram_proc_read(buf, &len, "Data B",
-			l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram));
+	if (_sram_proc_read(buf, &len, count, "L1 Data B",
+			&free_l1_data_B_sram_head,
+			&used_l1_data_B_sram_head))
+		goto not_done;
 #endif
 #if L1_CODE_LENGTH != 0
-	_l1sram_proc_read(buf, &len, "Instruction",
-			l1_inst_sram, ARRAY_SIZE(l1_inst_sram));
+	if (_sram_proc_read(buf, &len, count, "L1 Instruction",
+			&free_l1_inst_sram_head, &used_l1_inst_sram_head))
+		goto not_done;
+#endif
+#ifdef L2_LENGTH
+	if (_sram_proc_read(buf, &len, count, "L2",
+			&free_l2_sram_head, &used_l2_sram_head))
+		goto not_done;
 #endif
 
+	*eof = 1;
+ not_done:
 	return len;
 }
 
-static int __init l1sram_proc_init(void)
+static int __init sram_proc_init(void)
 {
 	struct proc_dir_entry *ptr;
 	ptr = create_proc_entry("sram", S_IFREG | S_IRUGO, NULL);
@@ -600,8 +799,8 @@ static int __init l1sram_proc_init(void)
 		return -1;
 	}
 	ptr->owner = THIS_MODULE;
-	ptr->read_proc = l1sram_proc_read;
+	ptr->read_proc = sram_proc_read;
 	return 0;
 }
-late_initcall(l1sram_proc_init);
+late_initcall(sram_proc_init);
 #endif
diff --git a/arch/blackfin/mm/blackfin_sram.h b/arch/blackfin/mm/blackfin_sram.h
index 0fb73b78dd60..8cb0945563f9 100644
--- a/arch/blackfin/mm/blackfin_sram.h
+++ b/arch/blackfin/mm/blackfin_sram.h
@@ -30,9 +30,7 @@
 #ifndef __BLACKFIN_SRAM_H__
 #define __BLACKFIN_SRAM_H__
 
-extern void l1sram_init(void);
-extern void l1_inst_sram_init(void);
-extern void l1_data_sram_init(void);
+extern void bfin_sram_init(void);
 extern void *l1sram_alloc(size_t);
 
 #endif
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index ec3141fefd20..bc240abb8745 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -53,33 +53,6 @@ static unsigned long empty_bad_page;
 
 unsigned long empty_zero_page;
 
-void show_mem(void)
-{
-	unsigned long i;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-
-	int cached = 0;
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map + i))
-			reserved++;
-		else if (PageSwapCache(mem_map + i))
-			cached++;
-		else if (!page_count(mem_map + i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d free pages\n", free);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /*
  * paging_init() continues the virtual memory environment setup which
  * was begun by the code in arch/head.S.
@@ -164,11 +137,14 @@ void __init mem_init(void)
 		"(%uk init code, %uk kernel code, %uk data, %uk dma, %uk reserved)\n",
 		(unsigned long) freepages << (PAGE_SHIFT-10), _ramend >> 10,
 		initk, codek, datak, DMA_UNCACHED_REGION >> 10, (reservedpages << (PAGE_SHIFT-10)));
+}
+
+static int __init sram_init(void)
+{
+	unsigned long tmp;
 
 	/* Initialize the blackfin L1 Memory. */
-	l1sram_init();
-	l1_data_sram_init();
-	l1_inst_sram_init();
+	bfin_sram_init();
 
 	/* Allocate this once; never free it.  We assume this gives us a
 	   pointer to the start of L1 scratchpad memory; panic if it
@@ -179,7 +155,10 @@ void __init mem_init(void)
 			tmp, (unsigned long)L1_SCRATCH_TASK_INFO);
 		panic("No L1, time to give up\n");
 	}
+
+	return 0;
 }
+pure_initcall(sram_init);
 
 static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end)
 {
diff --git a/arch/cris/arch-v10/boot/Makefile b/arch/cris/arch-v10/boot/Makefile
index 20c83a53caf3..217203014433 100644
--- a/arch/cris/arch-v10/boot/Makefile
+++ b/arch/cris/arch-v10/boot/Makefile
@@ -2,7 +2,6 @@
 # arch/cris/arch-v10/boot/Makefile
 #
 
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
 subdir- := compressed rescue
diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/arch-v10/boot/compressed/Makefile
index 4a031cb27eb9..08d943ce4be7 100644
--- a/arch/cris/arch-v10/boot/compressed/Makefile
+++ b/arch/cris/arch-v10/boot/compressed/Makefile
@@ -2,12 +2,10 @@
 # arch/cris/arch-v10/boot/compressed/Makefile
 #
 
-CC = gcc-cris -melf $(LINUXINCLUDE)
-ccflags-y += -O2
-LD = ld-cris
-ldflags-y += -T $(obj)/decompress.ld
+asflags-y += $(LINUXINCLUDE)
+ccflags-y += -O2 $(LINUXINCLUDE)
+ldflags-y += -T $(srctree)/$(obj)/decompress.ld
 OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
 quiet_cmd_image = BUILD   $@
@@ -21,12 +19,6 @@ $(obj)/decompress.o: $(OBJECTS) FORCE
 $(obj)/decompress.bin: $(obj)/decompress.o FORCE
 	$(call if_changed,objcopy)
 
-$(obj)/head.o: $(obj)/head.S .config
-	@$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@
-
-$(obj)/misc.o: $(obj)/misc.c .config
-	@$(CC) -D__KERNEL__ -c $< -o $@
-
 $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
 	$(call if_changed,image)
 
diff --git a/arch/cris/arch-v10/boot/compressed/decompress.ld b/arch/cris/arch-v10/boot/compressed/decompress.ld
index 0b0a14fe6177..e80f4594d543 100644
--- a/arch/cris/arch-v10/boot/compressed/decompress.ld
+++ b/arch/cris/arch-v10/boot/compressed/decompress.ld
@@ -1,4 +1,5 @@
-OUTPUT_FORMAT(elf32-us-cris)
+/* OUTPUT_FORMAT(elf32-us-cris) */
+OUTPUT_FORMAT(elf32-cris)
 
 MEMORY 
 	{
diff --git a/arch/cris/arch-v10/boot/compressed/head.S b/arch/cris/arch-v10/boot/compressed/head.S
index 610bdb237553..981fbae84959 100644
--- a/arch/cris/arch-v10/boot/compressed/head.S
+++ b/arch/cris/arch-v10/boot/compressed/head.S
@@ -15,77 +15,77 @@
 #define COMMAND_LINE_MAGIC 0x87109563
 
 	;; Exported symbols
-	
-	.globl	_input_data
 
-	
+	.globl	input_data
+
+
 	.text
 
 	nop
 	di
 
 ;; We need to initialze DRAM registers before we start using the DRAM
-	
-	cmp.d	RAM_INIT_MAGIC, r8	; Already initialized?
+
+	cmp.d	RAM_INIT_MAGIC, $r8	; Already initialized?
 	beq	dram_init_finished
 	nop
-	
+
 #include "../../lib/dram_init.S"
-	
-dram_init_finished:	
-		
+
+dram_init_finished:
+
 	;; Initiate the PA and PB ports
 
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, r0
-	move.b   r0, [R_PORT_PA_DATA]
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DATA, $r0
+	move.b   $r0, [R_PORT_PA_DATA]
 
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, r0
-	move.b   r0, [R_PORT_PA_DIR]
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PA_DIR, $r0
+	move.b   $r0, [R_PORT_PA_DIR]
 
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, r0
-	move.b   r0, [R_PORT_PB_DATA]
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DATA, $r0
+	move.b   $r0, [R_PORT_PB_DATA]
 
-	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, r0
-	move.b   r0, [R_PORT_PB_DIR]
+	move.b   CONFIG_ETRAX_DEF_R_PORT_PB_DIR, $r0
+	move.b   $r0, [R_PORT_PB_DIR]
 
 	;; Setup the stack to a suitably high address.
 	;; We assume 8 MB is the minimum DRAM in an eLinux
 	;; product and put the sp at the top for now.
 
-	move.d	0x40800000, sp
+	move.d	0x40800000, $sp
 
 	;; Figure out where the compressed piggyback image is
 	;; in the flash (since we wont try to copy it to DRAM
 	;; before unpacking). It is at _edata, but in flash.
 	;; Use (_edata - basse) as offset to the current PC.
-	
-basse:	move.d	pc, r5
-	and.d	0x7fffffff, r5	; strip any non-cache bit
-	subq	2, r5		; compensate for the move.d pc instr
-	move.d	r5, r0		; save for later - flash address of 'basse'
-	add.d	_edata, r5
-	sub.d	basse, r5	; r5 = flash address of '_edata'
-	
+
+basse:	move.d	$pc, $r5
+	and.d	0x7fffffff, $r5	; strip any non-cache bit
+	subq	2, $r5		; compensate for the move.d $pc instr
+	move.d	$r5, $r0		; save for later - flash address of 'basse'
+	add.d	_edata, $r5
+	sub.d	basse, $r5	; $r5 = flash address of '_edata'
+
 	;; Copy text+data to DRAM
-	
-	move.d	basse, r1	; destination
-	move.d	_edata, r2	; end destination
-1:	move.w	[r0+], r3
-	move.w	r3, [r1+]
-	cmp.d	r2, r1
+
+	move.d	basse, $r1	; destination
+	move.d	_edata, $r2	; end destination
+1:	move.w	[$r0+], $r3
+	move.w	$r3, [$r1+]
+	cmp.d	$r2, $r1
 	bcs	1b
 	nop
 
-	move.d	r5, [_input_data] ; for the decompressor
+	move.d	$r5, [input_data] ; for the decompressor
 
 
 	;; Clear the decompressors BSS (between _edata and _end)
-	
-	moveq	0, r0
-	move.d	_edata, r1
-	move.d	_end, r2
-1:	move.w	r0, [r1+]
-	cmp.d	r2, r1
+
+	moveq	0, $r0
+	move.d	_edata, $r1
+	move.d	_end, $r2
+1:	move.w	$r0, [$r1+]
+	cmp.d	$r2, $r1
 	bcs	1b
 	nop
 
@@ -94,16 +94,16 @@ basse:	move.d	pc, r5
 	move.d  $r10, [$r12]
 	move.d	_cmd_line_addr, $r12
 	move.d  $r11, [$r12]
-	
-	;; Do the decompression and save compressed size in _inptr
 
-	jsr	_decompress_kernel
-	
-	;; Put start address of root partition in r9 so the kernel can use it
+	;; Do the decompression and save compressed size in inptr
+
+	jsr	decompress_kernel
+
+	;; Put start address of root partition in $r9 so the kernel can use it
 	;; when mounting from flash
 
-	move.d	[_input_data], r9	; flash address of compressed kernel
-	add.d	[_inptr], r9		; size of compressed kernel
+	move.d	[input_data], $r9	; flash address of compressed kernel
+	add.d	[inptr], $r9		; size of compressed kernel
 
 	;; Restore command line magic and address.
 	move.d  _cmd_line_magic, $r10
@@ -112,12 +112,12 @@ basse:	move.d	pc, r5
 	move.d  [$r11], $r11
 
 	;; Enter the decompressed kernel
-	move.d	RAM_INIT_MAGIC, r8	; Tell kernel that DRAM is initialized
+	move.d	RAM_INIT_MAGIC, $r8	; Tell kernel that DRAM is initialized
 	jump	0x40004000	; kernel is linked to this address
-	
+
 	.data
 
-_input_data:
+input_data:
 	.dword	0		; used by the decompressor
 _cmd_line_magic:
 	.dword 0
diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c
index 9a43ab19391e..d933c89889db 100644
--- a/arch/cris/arch-v10/boot/compressed/misc.c
+++ b/arch/cris/arch-v10/boot/compressed/misc.c
@@ -29,12 +29,10 @@
 #define OF(args)  args
 #define STATIC static
 
-void* memset(void* s, int c, size_t n);
-void* memcpy(void* __dest, __const void* __src,
-	     size_t __n);
-
-#define memzero(s, n)     memset ((s), 0, (n))
+void *memset(void *s, int c, size_t n);
+void *memcpy(void *__dest, __const void *__src, size_t __n);
 
+#define memzero(s, n)     memset((s), 0, (n))
 
 typedef unsigned char  uch;
 typedef unsigned short ush;
@@ -62,79 +60,57 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 #define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
 #define RESERVED     0xC0 /* bit 6,7:   reserved */
 
-#define get_byte() inbuf[inptr++]	
-	
+#define get_byte() (inbuf[inptr++])
+
 /* Diagnostic functions */
 #ifdef DEBUG
-#  define Assert(cond,msg) {if(!(cond)) error(msg);}
+#  define Assert(cond, msg) do { \
+		if (!(cond)) \
+			error(msg); \
+	} while (0)
 #  define Trace(x) fprintf x
-#  define Tracev(x) {if (verbose) fprintf x ;}
-#  define Tracevv(x) {if (verbose>1) fprintf x ;}
-#  define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-#  define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+#  define Tracev(x) do { \
+		if (verbose) \
+			fprintf x; \
+	} while (0)
+#  define Tracevv(x) do { \
+		if (verbose > 1) \
+			fprintf x; \
+	} while (0)
+#  define Tracec(c, x) do { \
+		if (verbose && (c)) \
+			fprintf x; \
+	} while (0)
+#  define Tracecv(c, x) do { \
+		if (verbose > 1 && (c)) \
+			fprintf x; \
+	} while (0)
 #else
-#  define Assert(cond,msg)
+#  define Assert(cond, msg)
 #  define Trace(x)
 #  define Tracev(x)
 #  define Tracevv(x)
-#  define Tracec(c,x)
-#  define Tracecv(c,x)
+#  define Tracec(c, x)
+#  define Tracecv(c, x)
 #endif
 
-static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char *input_data;  /* lives in head.S */
 
 static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
- 
-static void *malloc(int size);
-static void free(void *where);
-static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
- 
 static void puts(const char *);
 
 /* the "heap" is put directly after the BSS ends, at end */
-  
-extern int end;
-static long free_mem_ptr = (long)&end;
- 
-#include "../../../../../lib/inflate.c"
-
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
 
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
+extern int _end;
+static long free_mem_ptr = (long)&_end;
+static long free_mem_end_ptr;
 
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
+#include "../../../../../lib/inflate.c"
 
 /* decompressor info and error messages to serial console */
 
@@ -142,44 +118,47 @@ static void
 puts(const char *s)
 {
 #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
-	while(*s) {
+	while (*s) {
 #ifdef CONFIG_ETRAX_DEBUG_PORT0
-		while(!(*R_SERIAL0_STATUS & (1 << 5))) ;
+		while (!(*R_SERIAL0_STATUS & (1 << 5))) ;
 		*R_SERIAL0_TR_DATA = *s++;
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT1
-		while(!(*R_SERIAL1_STATUS & (1 << 5))) ;
+		while (!(*R_SERIAL1_STATUS & (1 << 5))) ;
 		*R_SERIAL1_TR_DATA = *s++;
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT2
-		while(!(*R_SERIAL2_STATUS & (1 << 5))) ;
+		while (!(*R_SERIAL2_STATUS & (1 << 5))) ;
 		*R_SERIAL2_TR_DATA = *s++;
 #endif
 #ifdef CONFIG_ETRAX_DEBUG_PORT3
-		while(!(*R_SERIAL3_STATUS & (1 << 5))) ;
+		while (!(*R_SERIAL3_STATUS & (1 << 5))) ;
 		*R_SERIAL3_TR_DATA = *s++;
 #endif
 	}
 #endif
 }
 
-void*
-memset(void* s, int c, size_t n)
+void *memset(void *s, int c, size_t n)
 {
 	int i;
-	char *ss = (char*)s;
+	char *ss = (char *)s;
 
-	for (i=0;i<n;i++) ss[i] = c;
+	for (i = 0; i < n; i++)
+		ss[i] = c;
+
+	return s;
 }
 
-void*
-memcpy(void* __dest, __const void* __src,
-			    size_t __n)
+void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
 	int i;
 	char *d = (char *)__dest, *s = (char *)__src;
 
-	for (i=0;i<__n;i++) d[i] = s[i];
+	for (i = 0; i < __n; i++)
+		d[i] = s[i];
+
+	return __dest;
 }
 
 /* ===========================================================================
@@ -187,46 +166,44 @@ memcpy(void* __dest, __const void* __src,
  * (Used for the decompressed data only.)
  */
 
-static void
-flush_window()
+static void flush_window(void)
 {
-    ulg c = crc;         /* temporary variable */
-    unsigned n;
-    uch *in, *out, ch;
-    
-    in = window;
-    out = &output_data[output_ptr]; 
-    for (n = 0; n < outcnt; n++) {
-	    ch = *out++ = *in++;
-	    c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-    }
-    crc = c;
-    bytes_out += (ulg)outcnt;
-    output_ptr += (ulg)outcnt;
-    outcnt = 0;
+	ulg c = crc;         /* temporary variable */
+	unsigned n;
+	uch *in, *out, ch;
+
+	in = window;
+	out = &output_data[output_ptr];
+	for (n = 0; n < outcnt; n++) {
+		ch = *out = *in;
+		out++;
+		in++;
+		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+	}
+	crc = c;
+	bytes_out += (ulg)outcnt;
+	output_ptr += (ulg)outcnt;
+	outcnt = 0;
 }
 
-static void
-error(char *x)
+static void error(char *x)
 {
 	puts("\n\n");
 	puts(x);
 	puts("\n\n -- System halted\n");
 
-	while(1);	/* Halt */
+	while (1);	/* Halt */
 }
 
-void
-setup_normal_output_buffer()
+void setup_normal_output_buffer(void)
 {
 	output_data = (char *)KERNEL_LOAD_ADR;
 }
 
-void
-decompress_kernel()
+void decompress_kernel(void)
 {
 	char revision;
-	
+
 	/* input_data is set in head.S */
 	inbuf = input_data;
 
@@ -257,11 +234,10 @@ decompress_kernel()
 
 	makecrc();
 
-	__asm__ volatile ("move vr,%0" : "=rm" (revision));
-	if (revision < 10)
-	{
+	__asm__ volatile ("move $vr,%0" : "=rm" (revision));
+	if (revision < 10) {
 		puts("You need an ETRAX 100LX to run linux 2.6\n");
-		while(1);
+		while (1);
 	}
 
 	puts("Uncompressing Linux...\n");
diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/arch-v10/boot/rescue/Makefile
index 2e5045b9e19c..07688da92708 100644
--- a/arch/cris/arch-v10/boot/rescue/Makefile
+++ b/arch/cris/arch-v10/boot/rescue/Makefile
@@ -2,12 +2,9 @@
 # Makefile for rescue (bootstrap) code
 #
 
-CC = gcc-cris -mlinux $(LINUXINCLUDE)
-ccflags-y += -O2
-asflags-y += -traditional
-LD = gcc-cris -mlinux -nostdlib
-ldflags-y += -T $(obj)/rescue.ld
-OBJCOPY = objcopy-cris
+ccflags-y += -O2 $(LINUXINCLUDE)
+asflags-y += $(LINUXINCLUDE)
+ldflags-y += -T $(srctree)/$(obj)/rescue.ld
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
 OBJECT := $(obj)/head.o
diff --git a/arch/cris/arch-v10/drivers/pcf8563.c b/arch/cris/arch-v10/drivers/pcf8563.c
index 52103d16dc6c..8769dc914073 100644
--- a/arch/cris/arch-v10/drivers/pcf8563.c
+++ b/arch/cris/arch-v10/drivers/pcf8563.c
@@ -233,7 +233,7 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
 
 		if (copy_to_user((struct rtc_time *) arg, &tm,
 				 sizeof tm)) {
-			spin_unlock(&rtc_lock);
+			mutex_unlock(&rtc_lock);
 			return -EFAULT;
 		}
 
diff --git a/arch/cris/arch-v10/kernel/debugport.c b/arch/cris/arch-v10/kernel/debugport.c
index 04d5eee2c90c..3dc6e91ba39e 100644
--- a/arch/cris/arch-v10/kernel/debugport.c
+++ b/arch/cris/arch-v10/kernel/debugport.c
@@ -426,12 +426,18 @@ static int dummy_write(struct tty_struct * tty,
 	return count;
 }
 
-static int
-dummy_write_room(struct tty_struct *tty)
+static int dummy_write_room(struct tty_struct *tty)
 {
 	return 8192;
 }
 
+static const struct tty_operations dummy_ops = {
+	.open = dummy_open,
+	.close = dummy_close,
+	.write = dummy_write,
+	.write_room = dummy_write_room,
+};
+
 void __init
 init_dummy_console(void)
 {
@@ -444,14 +450,14 @@ init_dummy_console(void)
 	dummy_driver.type = TTY_DRIVER_TYPE_SERIAL;
 	dummy_driver.subtype = SERIAL_TYPE_NORMAL;
 	dummy_driver.init_termios = tty_std_termios;
+	/* Normally B9600 default... */
 	dummy_driver.init_termios.c_cflag =
-		B115200 | CS8 | CREAD | HUPCL | CLOCAL; /* is normally B9600 default... */
+		B115200 | CS8 | CREAD | HUPCL | CLOCAL;
 	dummy_driver.flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	dummy_driver.init_termios.c_ispeed = 115200;
+	dummy_driver.init_termios.c_ospeed = 115200;
 
-	dummy_driver.open = dummy_open;
-	dummy_driver.close = dummy_close;
-	dummy_driver.write = dummy_write;
-	dummy_driver.write_room = dummy_write_room;
+	dummy_driver.ops = &dummy_ops;
 	if (tty_register_driver(&dummy_driver))
 		panic("Couldn't register dummy serial driver\n");
 }
diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c
index a3ca55150745..6fea45f2e40c 100644
--- a/arch/cris/arch-v10/kernel/kgdb.c
+++ b/arch/cris/arch-v10/kernel/kgdb.c
@@ -278,14 +278,6 @@ void putDebugChar (int val);
 
 void enableDebugIRQ (void);
 
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static char highhex (int x);
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static char lowhex (int x);
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int hex (char ch);
 
@@ -356,9 +348,6 @@ extern unsigned char executing_task;
 /* Run-length encoding maximum length. Send 64 at most. */
 #define RUNLENMAX 64
 
-/* Definition of all valid hexadecimal characters */
-static const char hexchars[] = "0123456789abcdef";
-
 /* The inbound/outbound buffers used in packet I/O */
 static char remcomInBuffer[BUFMAX];
 static char remcomOutBuffer[BUFMAX];
@@ -499,8 +488,8 @@ gdb_cris_strtol (const char *s, char **endptr, int base)
 	char *sd;
 	int x = 0;
 	
-	for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1)
-		x = x * base + (sd - hexchars);
+	for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1)
+		x = x * base + (sd - hex_asc);
         
         if (endptr)
         {
@@ -670,22 +659,6 @@ read_register (char regno, unsigned int *valptr)
 }
 
 /********************************** Packet I/O ******************************/
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static inline char
-highhex(int x)
-{
-	return hexchars[(x >> 4) & 0xf];
-}
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static inline char
-lowhex(int x)
-{
-	return hexchars[x & 0xf];
-}
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int
 hex (char ch)
@@ -721,8 +694,7 @@ mem2hex(char *buf, unsigned char *mem, int count)
                 /* Valid mem address. */
                 for (i = 0; i < count; i++) {
                         ch = *mem++;
-                        *buf++ = highhex (ch);
-                        *buf++ = lowhex (ch);
+			buf = pack_hex_byte(buf, ch);
                 }
         }
         
@@ -857,9 +829,9 @@ putpacket(char *buffer)
 				src++;
 			}
 		}
-		putDebugChar ('#');
-		putDebugChar (highhex (checksum));
-		putDebugChar (lowhex (checksum));
+		putDebugChar('#');
+		putDebugChar(hex_asc_hi(checksum));
+		putDebugChar(hex_asc_lo(checksum));
 	} while(kgdb_started && (getDebugChar() != '+'));
 }
 
@@ -895,9 +867,8 @@ stub_is_stopped(int sigval)
         
 	/* Send trap type (converted to signal) */
 
-	*ptr++ = 'T';	
-	*ptr++ = highhex (sigval);
-	*ptr++ = lowhex (sigval);
+	*ptr++ = 'T';
+	ptr = pack_hex_byte(ptr, sigval);
 
 	/* Send register contents. We probably only need to send the
 	 * PC, frame pointer and stack pointer here. Other registers will be
@@ -910,9 +881,7 @@ stub_is_stopped(int sigval)
                 status = read_register (regno, &reg_cont);
                 
 		if (status == SUCCESS) {
-                        
-                        *ptr++ = highhex (regno);
-                        *ptr++ = lowhex (regno);
+			ptr = pack_hex_byte(ptr, regno);
                         *ptr++ = ':';
 
                         ptr = mem2hex(ptr, (unsigned char *)&reg_cont,
@@ -937,8 +906,8 @@ stub_is_stopped(int sigval)
 	/* Store thread:r...; with the executing task TID. */
 	gdb_cris_strcpy (&remcomOutBuffer[pos], "thread:");
 	pos += gdb_cris_strlen ("thread:");
-	remcomOutBuffer[pos++] = highhex (executing_task);
-	remcomOutBuffer[pos++] = lowhex (executing_task);
+	remcomOutBuffer[pos++] = hex_asc_hi(executing_task);
+	remcomOutBuffer[pos++] = hex_asc_lo(executing_task);
 	gdb_cris_strcpy (&remcomOutBuffer[pos], ";");
 #endif
 
@@ -1126,8 +1095,8 @@ handle_exception (int sigval)
 				   Success: SAA, where AA is the signal number.
 				   Failure: void. */
 				remcomOutBuffer[0] = 'S';
-				remcomOutBuffer[1] = highhex (sigval);
-				remcomOutBuffer[2] = lowhex (sigval);
+				remcomOutBuffer[1] = hex_asc_hi(sigval);
+				remcomOutBuffer[2] = hex_asc_lo(sigval);
 				remcomOutBuffer[3] = 0;
 				break;
 				
@@ -1224,23 +1193,23 @@ handle_exception (int sigval)
 						case 'C':
 							/* Identify the remote current thread. */
 							gdb_cris_strcpy (&remcomOutBuffer[0], "QC");
-							remcomOutBuffer[2] = highhex (current_thread_c);
-							remcomOutBuffer[3] = lowhex (current_thread_c);
+							remcomOutBuffer[2] = hex_asc_hi(current_thread_c);
+							remcomOutBuffer[3] = hex_asc_lo(current_thread_c);
 							remcomOutBuffer[4] = '\0';
 							break;
 						case 'L':
 							gdb_cris_strcpy (&remcomOutBuffer[0], "QM");
 							/* Reply with number of threads. */
 							if (os_is_started()) {
-								remcomOutBuffer[2] = highhex (number_of_tasks);
-								remcomOutBuffer[3] = lowhex (number_of_tasks);
+								remcomOutBuffer[2] = hex_asc_hi(number_of_tasks);
+								remcomOutBuffer[3] = hex_asc_lo(number_of_tasks);
 							}
 							else {
-								remcomOutBuffer[2] = highhex (0);
-								remcomOutBuffer[3] = lowhex (1);
+								remcomOutBuffer[2] = hex_asc_hi(0);
+								remcomOutBuffer[3] = hex_asc_lo(1);
 							}
 							/* Done with the reply. */
-							remcomOutBuffer[4] = lowhex (1);
+							remcomOutBuffer[4] = hex_asc_lo(1);
 							pos = 5;
 							/* Expects the argument thread id. */
 							for (; pos < (5 + HEXCHARS_IN_THREAD_ID); pos++)
@@ -1251,16 +1220,16 @@ handle_exception (int sigval)
 								for (thread_id = 0; thread_id < number_of_tasks; thread_id++) {
 									nextpos = pos + HEXCHARS_IN_THREAD_ID - 1;
 									for (; pos < nextpos; pos ++)
-										remcomOutBuffer[pos] = lowhex (0);
-									remcomOutBuffer[pos++] = lowhex (thread_id);
+										remcomOutBuffer[pos] = hex_asc_lo(0);
+									remcomOutBuffer[pos++] = hex_asc_lo(thread_id);
 								}
 							}
 							else {
 								/* Store the thread identifier of the boot task. */
 								nextpos = pos + HEXCHARS_IN_THREAD_ID - 1;
 								for (; pos < nextpos; pos ++)
-									remcomOutBuffer[pos] = lowhex (0);
-								remcomOutBuffer[pos++] = lowhex (current_thread_c);
+									remcomOutBuffer[pos] = hex_asc_lo(0);
+								remcomOutBuffer[pos++] = hex_asc_lo(current_thread_c);
 							}
 							remcomOutBuffer[pos] = '\0';
 							break;
diff --git a/arch/cris/arch-v10/mm/init.c b/arch/cris/arch-v10/mm/init.c
index e0fcd1a9bfd5..742fd1974c2e 100644
--- a/arch/cris/arch-v10/mm/init.c
+++ b/arch/cris/arch-v10/mm/init.c
@@ -182,7 +182,7 @@ paging_init(void)
 	 * mem_map page array.
 	 */
 
-	free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
+	free_area_init_node(0, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
 }
 
 /* Initialize remaps of some I/O-ports. It is important that this
diff --git a/arch/cris/arch-v32/boot/Makefile b/arch/cris/arch-v32/boot/Makefile
index 3f91349c5f12..99896ad60b30 100644
--- a/arch/cris/arch-v32/boot/Makefile
+++ b/arch/cris/arch-v32/boot/Makefile
@@ -2,7 +2,6 @@
 # arch/cris/arch-v32/boot/Makefile
 #
 
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary -R .note -R .comment
 
 subdir- := compressed rescue
diff --git a/arch/cris/arch-v32/boot/compressed/Makefile b/arch/cris/arch-v32/boot/compressed/Makefile
index 2c8c2c3039c5..d6335f26083b 100644
--- a/arch/cris/arch-v32/boot/compressed/Makefile
+++ b/arch/cris/arch-v32/boot/compressed/Makefile
@@ -2,14 +2,10 @@
 # arch/cris/arch-v32/boot/compressed/Makefile
 #
 
-CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
 asflags-y += -I $(srctree)/include/asm/mach/ -I $(srctree)/include/asm/arch
 ccflags-y += -O2 -I $(srctree)/include/asm/mach/ -I $(srctree)/include/asm/arch
-LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(obj)/decompress.ld
-obj-y = head.o misc.o
+ldflags-y += -T $(srctree)/$(obj)/decompress.ld
 OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 
 quiet_cmd_image = BUILD   $@
diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/arch-v32/boot/compressed/misc.c
index 55b2695c5d70..3595e16e82bc 100644
--- a/arch/cris/arch-v32/boot/compressed/misc.c
+++ b/arch/cris/arch-v32/boot/compressed/misc.c
@@ -89,20 +89,14 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char *input_data;  /* lives in head.S */
 
-static long bytes_out = 0;
+static long bytes_out;
 static uch *output_data;
-static unsigned long output_ptr = 0;
+static unsigned long output_ptr;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void puts(const char *);
 
@@ -110,37 +104,10 @@ static void puts(const char *);
 
 extern int _end;
 static long free_mem_ptr = (long)&_end;
+static long free_mem_end_ptr;
 
 #include "../../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 /* decompressor info and error messages to serial console */
 
 static inline void
diff --git a/arch/cris/arch-v32/boot/rescue/Makefile b/arch/cris/arch-v32/boot/rescue/Makefile
index c0987795dcb7..44ae0ad61f90 100644
--- a/arch/cris/arch-v32/boot/rescue/Makefile
+++ b/arch/cris/arch-v32/boot/rescue/Makefile
@@ -7,9 +7,8 @@ ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
 		-I $(srctree)/include/asm/arch
 asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
 LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(obj)/rescue.ld
+ldflags-y += -T $(srctree)/$(obj)/rescue.ld
 LDPOSTFLAGS = -lgcc
-OBJCOPY = objcopy-cris
 OBJCOPYFLAGS = -O binary --remove-section=.bss
 obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
 OBJECT := $(obj)/head.o
diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig
index 2a92cb1886ca..7a64fcef9d07 100644
--- a/arch/cris/arch-v32/drivers/Kconfig
+++ b/arch/cris/arch-v32/drivers/Kconfig
@@ -641,6 +641,7 @@ config PCI
        bool
        depends on ETRAX_CARDBUS
        default y
+       select HAVE_GENERIC_DMA_COHERENT
 
 config ETRAX_IOP_FW_LOAD
 	tristate "IO-processor hotplug firmware loading support"
diff --git a/arch/cris/arch-v32/drivers/pcf8563.c b/arch/cris/arch-v32/drivers/pcf8563.c
index 53db3870ba04..f263ab571221 100644
--- a/arch/cris/arch-v32/drivers/pcf8563.c
+++ b/arch/cris/arch-v32/drivers/pcf8563.c
@@ -229,7 +229,7 @@ int pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
 
 		if (copy_to_user((struct rtc_time *) arg, &tm,
 				 sizeof tm)) {
-			spin_unlock(&rtc_lock);
+			mutex_unlock(&rtc_lock);
 			return -EFAULT;
 		}
 
diff --git a/arch/cris/arch-v32/drivers/pci/dma.c b/arch/cris/arch-v32/drivers/pci/dma.c
index e0364654fc44..fbe65954ee6c 100644
--- a/arch/cris/arch-v32/drivers/pci/dma.c
+++ b/arch/cris/arch-v32/drivers/pci/dma.c
@@ -15,35 +15,16 @@
 #include <linux/pci.h>
 #include <asm/io.h>
 
-struct dma_coherent_mem {
-	void		*virt_base;
-	u32		device_base;
-	int		size;
-	int		flags;
-	unsigned long	*bitmap;
-};
-
 void *dma_alloc_coherent(struct device *dev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
 	int order = get_order(size);
 	/* ignore region specifiers */
 	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
 
-	if (mem) {
-		int page = bitmap_find_free_region(mem->bitmap, mem->size,
-						     order);
-		if (page >= 0) {
-			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
-			ret = mem->virt_base + (page << PAGE_SHIFT);
-			memset(ret, 0, size);
-			return ret;
-		}
-		if (mem->flags & DMA_MEMORY_EXCLUSIVE)
-			return NULL;
-	}
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+		return ret;
 
 	if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
 		gfp |= GFP_DMA;
@@ -60,90 +41,9 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 void dma_free_coherent(struct device *dev, size_t size,
 			 void *vaddr, dma_addr_t dma_handle)
 {
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
 	int order = get_order(size);
 
-	if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) {
-		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-
-		bitmap_release_region(mem->bitmap, page, order);
-	} else
+	if (!dma_release_from_coherent(dev, order, vaddr))
 		free_pages((unsigned long)vaddr, order);
 }
 
-int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-				dma_addr_t device_addr, size_t size, int flags)
-{
-	void __iomem *mem_base;
-	int pages = size >> PAGE_SHIFT;
-	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
-
-	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
-		goto out;
-	if (!size)
-		goto out;
-	if (dev->dma_mem)
-		goto out;
-
-	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
-
-	mem_base = ioremap(bus_addr, size);
-	if (!mem_base)
-		goto out;
-
-	dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-	if (!dev->dma_mem)
-		goto iounmap_out;
-	dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-	if (!dev->dma_mem->bitmap)
-		goto free1_out;
-
-	dev->dma_mem->virt_base = mem_base;
-	dev->dma_mem->device_base = device_addr;
-	dev->dma_mem->size = pages;
-	dev->dma_mem->flags = flags;
-
-	if (flags & DMA_MEMORY_MAP)
-		return DMA_MEMORY_MAP;
-
-	return DMA_MEMORY_IO;
-
- free1_out:
-	kfree(dev->dma_mem);
- iounmap_out:
-	iounmap(mem_base);
- out:
-	return 0;
-}
-EXPORT_SYMBOL(dma_declare_coherent_memory);
-
-void dma_release_declared_memory(struct device *dev)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-
-	if(!mem)
-		return;
-	dev->dma_mem = NULL;
-	iounmap(mem->virt_base);
-	kfree(mem->bitmap);
-	kfree(mem);
-}
-EXPORT_SYMBOL(dma_release_declared_memory);
-
-void *dma_mark_declared_memory_occupied(struct device *dev,
-					dma_addr_t device_addr, size_t size)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	int pos, err;
-
-	if (!mem)
-		return ERR_PTR(-EINVAL);
-
-	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
-	if (err != 0)
-		return ERR_PTR(err);
-	return mem->virt_base + (pos << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c
index 4e2e2e271efb..8bd5a5bc0dc7 100644
--- a/arch/cris/arch-v32/kernel/kgdb.c
+++ b/arch/cris/arch-v32/kernel/kgdb.c
@@ -398,14 +398,6 @@ void putDebugChar(int val)
 }
 #endif
 
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static char highhex(int x);
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static char lowhex(int x);
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int hex(char ch);
 
@@ -464,9 +456,6 @@ void breakpoint(void);
 /* Run-length encoding maximum length. Send 64 at most. */
 #define RUNLENMAX 64
 
-/* Definition of all valid hexadecimal characters */
-static const char hexchars[] = "0123456789abcdef";
-
 /* The inbound/outbound buffers used in packet I/O */
 static char input_buffer[BUFMAX];
 static char output_buffer[BUFMAX];
@@ -550,8 +539,8 @@ gdb_cris_strtol(const char *s, char **endptr, int base)
 	char *sd;
 	int x = 0;
 
-	for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1)
-		x = x * base + (sd - hexchars);
+	for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1)
+		x = x * base + (sd - hex_asc);
 
         if (endptr) {
                 /* Unconverted suffix is stored in endptr unless endptr is NULL. */
@@ -655,22 +644,6 @@ read_register(char regno, unsigned int *valptr)
 }
 
 /********************************** Packet I/O ******************************/
-/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte,
-   represented by int x. */
-static inline char
-highhex(int x)
-{
-	return hexchars[(x >> 4) & 0xf];
-}
-
-/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte,
-   represented by int x. */
-static inline char
-lowhex(int x)
-{
-	return hexchars[x & 0xf];
-}
-
 /* Returns the integer equivalent of a hexadecimal character. */
 static int
 hex(char ch)
@@ -704,8 +677,7 @@ mem2hex(char *buf, unsigned char *mem, int count)
                 /* Valid mem address. */
 		for (i = 0; i < count; i++) {
 			ch = *mem++;
-			*buf++ = highhex (ch);
-			*buf++ = lowhex (ch);
+			buf = pack_hex_byte(buf, ch);
 		}
         }
         /* Terminate properly. */
@@ -723,8 +695,7 @@ mem2hex_nbo(char *buf, unsigned char *mem, int count)
 	mem += count - 1;
 	for (i = 0; i < count; i++) {
 		ch = *mem--;
-		*buf++ = highhex (ch);
-		*buf++ = lowhex (ch);
+		buf = pack_hex_byte(buf, ch);
         }
 
         /* Terminate properly. */
@@ -862,8 +833,8 @@ putpacket(char *buffer)
 			}
 		}
 		putDebugChar('#');
-		putDebugChar(highhex (checksum));
-		putDebugChar(lowhex (checksum));
+		putDebugChar(hex_asc_hi(checksum));
+		putDebugChar(hex_asc_lo(checksum));
 	} while(kgdb_started && (getDebugChar() != '+'));
 }
 
@@ -909,8 +880,7 @@ stub_is_stopped(int sigval)
 	/* Send trap type (converted to signal) */
 
 	*ptr++ = 'T';
-	*ptr++ = highhex(sigval);
-	*ptr++ = lowhex(sigval);
+	ptr = pack_hex_byte(ptr, sigval);
 
 	if (((reg.exs & 0xff00) >> 8) == 0xc) {
 
@@ -1018,30 +988,26 @@ stub_is_stopped(int sigval)
 	}
 	/* Only send PC, frame and stack pointer. */
 	read_register(PC, &reg_cont);
-	*ptr++ = highhex(PC);
-	*ptr++ = lowhex(PC);
+	ptr = pack_hex_byte(PC);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[PC]);
 	*ptr++ = ';';
 
 	read_register(R8, &reg_cont);
-	*ptr++ = highhex(R8);
-	*ptr++ = lowhex(R8);
+	ptr = pack_hex_byte(R8);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[R8]);
 	*ptr++ = ';';
 
 	read_register(SP, &reg_cont);
-	*ptr++ = highhex(SP);
-	*ptr++ = lowhex(SP);
+	ptr = pack_hex_byte(SP);
 	*ptr++ = ':';
 	ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[SP]);
 	*ptr++ = ';';
 
 	/* Send ERP as well; this will save us an entire register fetch in some cases. */
         read_register(ERP, &reg_cont);
-        *ptr++ = highhex(ERP);
-        *ptr++ = lowhex(ERP);
+	ptr = pack_hex_byte(ERP);
         *ptr++ = ':';
         ptr = mem2hex(ptr, (unsigned char *)&reg_cont, register_size[ERP]);
         *ptr++ = ';';
@@ -1533,8 +1499,8 @@ handle_exception(int sigval)
 				   Success: SAA, where AA is the signal number.
 				   Failure: void. */
 				output_buffer[0] = 'S';
-				output_buffer[1] = highhex(sigval);
-				output_buffer[2] = lowhex(sigval);
+				output_buffer[1] = hex_asc_hi(sigval);
+				output_buffer[2] = hex_asc_lo(sigval);
 				output_buffer[3] = 0;
 				break;
 
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
index a9c3334e46c9..952a24b2f5a9 100644
--- a/arch/cris/arch-v32/kernel/smp.c
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -194,7 +194,7 @@ void stop_this_cpu(void* dummy)
 /* Other calls */
 void smp_send_stop(void)
 {
-	smp_call_function(stop_this_cpu, NULL, 1, 0);
+	smp_call_function(stop_this_cpu, NULL, 0);
 }
 
 int setup_profiling_timer(unsigned int multiplier)
@@ -316,8 +316,7 @@ int send_ipi(int vector, int wait, cpumask_t cpu_mask)
  * You must not call this function with disabled interrupts or from a
  * hardware interrupt handler or from a bottom half handler.
  */
-int smp_call_function(void (*func)(void *info), void *info,
-		      int nonatomic, int wait)
+int smp_call_function(void (*func)(void *info), void *info, int wait)
 {
 	cpumask_t cpu_mask = CPU_MASK_ALL;
 	struct call_data_struct data;
diff --git a/arch/cris/arch-v32/mm/init.c b/arch/cris/arch-v32/mm/init.c
index 5a9ac5834647..8a34b8b74293 100644
--- a/arch/cris/arch-v32/mm/init.c
+++ b/arch/cris/arch-v32/mm/init.c
@@ -162,7 +162,7 @@ paging_init(void)
 	 * substantially higher than 0, like us (we start at PAGE_OFFSET). This
 	 * saves space in the mem_map page array.
 	 */
-	free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
+	free_area_init_node(0, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
 
 	mem_map = contig_page_data.node_mem_map;
 }
diff --git a/arch/cris/kernel/profile.c b/arch/cris/kernel/profile.c
index 44f7b4f79476..9aa571169bcc 100644
--- a/arch/cris/kernel/profile.c
+++ b/arch/cris/kernel/profile.c
@@ -35,19 +35,16 @@ read_cris_profile(struct file *file, char __user *buf,
 		  size_t count, loff_t *ppos)
 {
 	unsigned long p = *ppos;
+	ssize_t ret;
 
-	if (p > SAMPLE_BUFFER_SIZE)
-		return 0;
+	ret = simple_read_from_buffer(buf, count, ppos, sample_buffer,
+						SAMPLE_BUFFER_SIZE);
+	if (ret < 0)
+		return ret;
 
-	if (p + count > SAMPLE_BUFFER_SIZE)
-		count = SAMPLE_BUFFER_SIZE - p;
-	if (copy_to_user(buf, sample_buffer + p,count))
-		return -EFAULT;
+	memset(sample_buffer + p, 0, ret);
 
-	memset(sample_buffer + p, 0, count);
-	*ppos += count;
-
-	return count;
+	return ret;
 }
 
 static ssize_t
diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c
index 5b06ffa15e34..2fdd212eb250 100644
--- a/arch/cris/mm/init.c
+++ b/arch/cris/mm/init.c
@@ -19,36 +19,6 @@ unsigned long empty_zero_page;
 extern char _stext, _edata, _etext; /* From linkerscript */
 extern char __init_begin, __init_end;
 
-void 
-show_mem(void)
-{
-	int i,free = 0,total = 0,cached = 0, reserved = 0, nonshared = 0;
-	int shared = 0;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map+i))
-			free++;
-		else if (page_count(mem_map+i) == 1)
-			nonshared++;
-		else
-			shared += page_count(mem_map+i) - 1;
-	}
-	printk("%d pages of RAM\n",total);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages nonshared\n",nonshared);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
 void __init
 mem_init(void)
 {
diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S
index b8a4b94779b1..99060ab507ee 100644
--- a/arch/frv/kernel/entry.S
+++ b/arch/frv/kernel/entry.S
@@ -1519,6 +1519,11 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
-
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
 
 syscall_table_size = (. - sys_call_table)
diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c
index 48a0393e7cee..7ca8a6b19ac9 100644
--- a/arch/frv/kernel/gdb-stub.c
+++ b/arch/frv/kernel/gdb-stub.c
@@ -182,8 +182,6 @@ extern volatile u32 __attribute__((section(".bss"))) gdbstub_trace_through_excep
 static char	input_buffer[BUFMAX];
 static char	output_buffer[BUFMAX];
 
-static const char hexchars[] = "0123456789abcdef";
-
 static const char *regnames[] = {
 	"PSR ", "ISR ", "CCR ", "CCCR",
 	"LR  ", "LCR ", "PC  ", "_stt",
@@ -383,8 +381,8 @@ static int gdbstub_send_packet(char *buffer)
 		}
 
 		gdbstub_tx_char('#');
-		gdbstub_tx_char(hexchars[checksum >> 4]);
-		gdbstub_tx_char(hexchars[checksum & 0xf]);
+		gdbstub_tx_char(hex_asc_hi(checksum));
+		gdbstub_tx_char(hex_asc_lo(checksum));
 
 	} while (gdbstub_rx_char(&ch,0),
 #ifdef GDBSTUB_DEBUG_PROTOCOL
@@ -674,8 +672,7 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if ((uint32_t)mem&1 && count>=1) {
 		if (!gdbstub_read_byte(mem,ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 		mem++;
 		count--;
 	}
@@ -683,10 +680,8 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if ((uint32_t)mem&3 && count>=2) {
 		if (!gdbstub_read_word(mem,(uint16_t *)ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -694,14 +689,10 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	while (count>=4) {
 		if (!gdbstub_read_dword(mem,(uint32_t *)ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
-		*buf++ = hexchars[ch[2] >> 4];
-		*buf++ = hexchars[ch[2] & 0xf];
-		*buf++ = hexchars[ch[3] >> 4];
-		*buf++ = hexchars[ch[3] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
+		buf = pack_hex_byte(buf, ch[2]);
+		buf = pack_hex_byte(buf, ch[3]);
 		mem += 4;
 		count -= 4;
 	}
@@ -709,10 +700,8 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if (count>=2) {
 		if (!gdbstub_read_word(mem,(uint16_t *)ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -720,8 +709,7 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa
 	if (count>=1) {
 		if (!gdbstub_read_byte(mem,ch))
 			return NULL;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 	}
 
 	*buf = 0;
@@ -1471,22 +1459,22 @@ void gdbstub(int sigval)
 		*ptr++ = 'O';
 		ptr = mem2hex(title, ptr, sizeof(title) - 1,0);
 
-		hx = hexchars[(brr & 0xf0000000) >> 28];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x0f000000) >> 24];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x00f00000) >> 20];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x000f0000) >> 16];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x0000f000) >> 12];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x00000f00) >> 8];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x000000f0) >> 4];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(brr & 0x0000000f)];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
+		hx = hex_asc_hi(brr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(brr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(brr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(brr);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(brr);
+		ptr = pack_hex_byte(ptr, hx);
 
 		ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
 		*ptr = 0;
@@ -1500,12 +1488,10 @@ void gdbstub(int sigval)
 
 	/* Send trap type (converted to signal) */
 	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
+	ptr = pack_hex_byte(ptr, sigval);
 
 	/* Send Error PC */
-	*ptr++ = hexchars[GDB_REG_PC >> 4];
-	*ptr++ = hexchars[GDB_REG_PC & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REG_PC);
 	*ptr++ = ':';
 	ptr = mem2hex(&__debug_frame->pc, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1513,8 +1499,7 @@ void gdbstub(int sigval)
 	/*
 	 * Send frame pointer
 	 */
-	*ptr++ = hexchars[GDB_REG_FP >> 4];
-	*ptr++ = hexchars[GDB_REG_FP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REG_FP);
 	*ptr++ = ':';
 	ptr = mem2hex(&__debug_frame->fp, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1522,8 +1507,7 @@ void gdbstub(int sigval)
 	/*
 	 * Send stack pointer
 	 */
-	*ptr++ = hexchars[GDB_REG_SP >> 4];
-	*ptr++ = hexchars[GDB_REG_SP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REG_SP);
 	*ptr++ = ':';
 	ptr = mem2hex(&__debug_frame->sp, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1548,8 +1532,8 @@ void gdbstub(int sigval)
 			/* request repeat of last signal number */
 		case '?':
 			output_buffer[0] = 'S';
-			output_buffer[1] = hexchars[sigval >> 4];
-			output_buffer[2] = hexchars[sigval & 0xf];
+			output_buffer[1] = hex_asc_hi(sigval);
+			output_buffer[2] = hex_asc_lo(sigval);
 			output_buffer[3] = 0;
 			break;
 
@@ -2059,8 +2043,8 @@ void gdbstub_exit(int status)
 	}
 
 	gdbstub_tx_char('#');
-	gdbstub_tx_char(hexchars[checksum >> 4]);
-	gdbstub_tx_char(hexchars[checksum & 0xf]);
+	gdbstub_tx_char(hex_asc_hi(checksum));
+	gdbstub_tx_char(hex_asc_lo(checksum));
 
 	/* make sure the output is flushed, or else RedBoot might clobber it */
 	gdbstub_tx_char('-');
diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c
index 73f3aeefd203..d1113c5031f5 100644
--- a/arch/frv/kernel/pm.c
+++ b/arch/frv/kernel/pm.c
@@ -14,7 +14,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/sched.h>
 #include <linux/interrupt.h>
 #include <linux/sysctl.h>
diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c
index 4f165c93be42..edae117fcc2b 100644
--- a/arch/frv/mb93090-mb00/pci-frv.c
+++ b/arch/frv/mb93090-mb00/pci-frv.c
@@ -19,36 +19,6 @@
 
 #include "pci-frv.h"
 
-#if 0
-void
-pcibios_update_resource(struct pci_dev *dev, struct resource *root,
-			struct resource *res, int resource)
-{
-	u32 new, check;
-	int reg;
-
-	new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
-	if (resource < 6) {
-		reg = PCI_BASE_ADDRESS_0 + 4*resource;
-	} else if (resource == PCI_ROM_RESOURCE) {
-		res->flags |= IORESOURCE_ROM_ENABLE;
-		new |= PCI_ROM_ADDRESS_ENABLE;
-		reg = dev->rom_base_reg;
-	} else {
-		/* Somebody might have asked allocation of a non-standard resource */
-		return;
-	}
-
-	pci_write_config_dword(dev, reg, new);
-	pci_read_config_dword(dev, reg, &check);
-	if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
-		printk(KERN_ERR "PCI: Error while updating region "
-		       "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
-		       new, check);
-	}
-}
-#endif
-
 /*
  * We need to avoid collisions with `mirrored' VGA ports
  * and other strange ISA hardware, so we always want the
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index 9af7740f32fb..1b851db34186 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -63,37 +63,6 @@ EXPORT_SYMBOL(empty_zero_page);
 
 /*****************************************************************************/
 /*
- *
- */
-void show_mem(void)
-{
-	unsigned long i;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		struct page *page = &mem_map[i];
-
-		total++;
-		if (PageReserved(page))
-			reserved++;
-		else if (!page_count(page))
-			free++;
-		else
-			shared += page_count(page) - 1;
-	}
-
-	printk("%d pages of RAM\n",total);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-
-} /* end show_mem() */
-
-/*****************************************************************************/
-/*
  * paging_init() continues the virtual memory environment setup which
  * was begun by the code in arch/head.S.
  * The parameters are pointers to where to stick the starting and ending
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 085dc6ec152b..396ab059efa3 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -203,20 +203,6 @@ config UNIX98_PTYS
 	  Read the instructions in <file:Documentation/Changes> pertaining to
 	  pseudo terminals. It's safe to say N.
 
-config UNIX98_PTY_COUNT
-	int "Maximum number of Unix98 PTYs in use (0-2048)"
-	depends on UNIX98_PTYS
-	default "256"
-	help
-	  The maximum number of Unix98 PTYs that can be used at any one time.
-	  The default is 256, and should be enough for desktop systems. Server
-	  machines which support incoming telnet/rlogin/ssh connections and/or
-	  serve several X terminals may want to increase this: every incoming
-	  connection and every xterm uses up one PTY.
-
-	  When not in use, each additional set of 256 PTYs occupy
-	  approximately 8 KB of kernel memory on 32-bit architectures.
-
 source "drivers/char/pcmcia/Kconfig"
 
 source "drivers/serial/Kconfig"
diff --git a/arch/h8300/boot/compressed/misc.c b/arch/h8300/boot/compressed/misc.c
index 845074588af0..51ab6cbd030f 100644
--- a/arch/h8300/boot/compressed/misc.c
+++ b/arch/h8300/boot/compressed/misc.c
@@ -67,8 +67,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -77,11 +75,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 int puts(const char *);
 
@@ -98,38 +92,6 @@ static unsigned long free_mem_end_ptr;
 #define TDR *((volatile unsigned char *)0xffff8b)
 #define SSR *((volatile unsigned char *)0xffff8c)
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr == 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 int puts(const char *s)
 {
 	return 0;
diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c
index b1f25c20a5db..7fda657110eb 100644
--- a/arch/h8300/kernel/setup.c
+++ b/arch/h8300/kernel/setup.c
@@ -20,6 +20,7 @@
 #include <linux/sched.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/fb.h>
 #include <linux/console.h>
diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c
index e4f4199f97ab..a1d228f5e4e6 100644
--- a/arch/h8300/mm/init.c
+++ b/arch/h8300/mm/init.c
@@ -64,33 +64,6 @@ unsigned long empty_zero_page;
 
 extern unsigned long rom_length;
 
-void show_mem(void)
-{
-    unsigned long i;
-    int free = 0, total = 0, reserved = 0, shared = 0;
-    int cached = 0;
-
-    printk("\nMem-info:\n");
-    show_free_areas();
-    i = max_mapnr;
-    while (i-- > 0) {
-	total++;
-	if (PageReserved(mem_map+i))
-	    reserved++;
-	else if (PageSwapCache(mem_map+i))
-	    cached++;
-	else if (!page_count(mem_map+i))
-	    free++;
-	else
-	    shared += page_count(mem_map+i) - 1;
-    }
-    printk("%d pages of RAM\n",total);
-    printk("%d free pages\n",free);
-    printk("%d reserved pages\n",reserved);
-    printk("%d pages shared\n",shared);
-    printk("%d pages swap cached\n",cached);
-}
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 16be41446b5b..451f2ffb137b 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -303,6 +303,7 @@ config VIRT_CPU_ACCOUNTING
 
 config SMP
 	bool "Symmetric multi-processing support"
+	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N.  If you have a system with more
@@ -539,8 +540,8 @@ config KEXEC
 	  strongly in flux, so no good recommendation can be made.
 
 config CRASH_DUMP
-	  bool "kernel crash dumps (EXPERIMENTAL)"
-	  depends on EXPERIMENTAL && IA64_MCA_RECOVERY && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
+	  bool "kernel crash dumps"
+	  depends on IA64_MCA_RECOVERY && !IA64_HP_SIM && (!SMP || HOTPLUG_CPU)
 	  help
 	    Generate crash dump after being started by kexec.
 
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index e67ee3f27698..905d25b13d5a 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -100,3 +100,9 @@ define archhelp
   echo '  boot		- Build vmlinux and bootloader for Ski simulator'
   echo '* unwcheck	- Check vmlinux for invalid unwind info'
 endef
+
+archprepare: make_nr_irqs_h FORCE
+PHONY += make_nr_irqs_h FORCE
+
+make_nr_irqs_h: FORCE
+	$(Q)$(MAKE) $(build)=arch/ia64/kernel include/asm-ia64/nr-irqs.h
diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c
index 1c44ec2a1d58..88b6e6f3fd88 100644
--- a/arch/ia64/hp/common/hwsw_iommu.c
+++ b/arch/ia64/hp/common/hwsw_iommu.c
@@ -186,9 +186,10 @@ hwsw_dma_supported (struct device *dev, u64 mask)
 }
 
 int
-hwsw_dma_mapping_error (dma_addr_t dma_addr)
+hwsw_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
-	return hwiommu_dma_mapping_error (dma_addr) || swiotlb_dma_mapping_error(dma_addr);
+	return hwiommu_dma_mapping_error(dev, dma_addr) ||
+		swiotlb_dma_mapping_error(dev, dma_addr);
 }
 
 EXPORT_SYMBOL(hwsw_dma_mapping_error);
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 34421aed1e2a..4956be40d7b5 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -2147,7 +2147,7 @@ sba_dma_supported (struct device *dev, u64 mask)
 }
 
 int
-sba_dma_mapping_error (dma_addr_t dma_addr)
+sba_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index 23cafc80d2a4..24b1ad5334cb 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -193,18 +193,6 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
  * -------------------------------------------------------------------
  */
 
-#if 0
-/*
- * not really used in our situation so keep them commented out for now
- */
-static DECLARE_TASK_QUEUE(tq_serial); /* used to be at the top of the file */
-static void do_serial_bh(void)
-{
-	run_task_queue(&tq_serial);
-	printk(KERN_ERR "do_serial_bh: called\n");
-}
-#endif
-
 static void do_softint(struct work_struct *private_)
 {
 	printk(KERN_ERR "simserial: do_softint called\n");
@@ -351,11 +339,7 @@ static void rs_flush_buffer(struct tty_struct *tty)
 	info->xmit.head = info->xmit.tail = 0;
 	local_irq_restore(flags);
 
-	wake_up_interruptible(&tty->write_wait);
-
-	if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-	    tty->ldisc.write_wakeup)
-		(tty->ldisc.write_wakeup)(tty);
+	tty_wakeup(tty);
 }
 
 /*
@@ -404,12 +388,6 @@ static void rs_unthrottle(struct tty_struct * tty)
 	printk(KERN_INFO "simrs_unthrottle called\n");
 }
 
-/*
- * rs_break() --- routine which turns the break handling on or off
- */
-static void rs_break(struct tty_struct *tty, int break_state)
-{
-}
 
 static int rs_ioctl(struct tty_struct *tty, struct file * file,
 		    unsigned int cmd, unsigned long arg)
@@ -422,14 +400,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 	}
 
 	switch (cmd) {
-		case TIOCMGET:
-			printk(KERN_INFO "rs_ioctl: TIOCMGET called\n");
-			return -EINVAL;
-		case TIOCMBIS:
-		case TIOCMBIC:
-		case TIOCMSET:
-			printk(KERN_INFO "rs_ioctl: TIOCMBIS/BIC/SET called\n");
-			return -EINVAL;
 		case TIOCGSERIAL:
 			printk(KERN_INFO "simrs_ioctl TIOCGSERIAL called\n");
 			return 0;
@@ -488,14 +458,6 @@ static int rs_ioctl(struct tty_struct *tty, struct file * file,
 
 static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 {
-	unsigned int cflag = tty->termios->c_cflag;
-
-	if (   (cflag == old_termios->c_cflag)
-	    && (   RELEVANT_IFLAG(tty->termios->c_iflag)
-		== RELEVANT_IFLAG(old_termios->c_iflag)))
-	  return;
-
-
 	/* Handle turning off CRTSCTS */
 	if ((old_termios->c_cflag & CRTSCTS) &&
 	    !(tty->termios->c_cflag & CRTSCTS)) {
@@ -623,9 +585,8 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 	 * the line discipline to only process XON/XOFF characters.
 	 */
 	shutdown(info);
-	if (tty->ops->flush_buffer)
-		tty->ops->flush_buffer(tty);
-	if (tty->ldisc.flush_buffer) tty->ldisc.flush_buffer(tty);
+	rs_flush_buffer(tty);
+	tty_ldisc_flush(tty);
 	info->event = 0;
 	info->tty = NULL;
 	if (info->blocked_open) {
@@ -955,7 +916,6 @@ static const struct tty_operations hp_ops = {
 	.stop = rs_stop,
 	.start = rs_start,
 	.hangup = rs_hangup,
-	.break_ctl = rs_break,
 	.wait_until_sent = rs_wait_until_sent,
 	.read_proc = rs_read_proc,
 };
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 7e028ceb93ba..465116aecb85 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -1139,7 +1139,7 @@ sys32_pipe (int __user *fd)
 	int retval;
 	int fds[2];
 
-	retval = do_pipe(fds);
+	retval = do_pipe_flags(fds, 0);
 	if (retval)
 		goto out;
 	if (copy_to_user(fd, fds, sizeof(fds)))
diff --git a/arch/ia64/include/asm/Kbuild b/arch/ia64/include/asm/Kbuild
new file mode 100644
index 000000000000..ccbe8ae47a61
--- /dev/null
+++ b/arch/ia64/include/asm/Kbuild
@@ -0,0 +1,16 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += break.h
+header-y += fpu.h
+header-y += fpswa.h
+header-y += ia64regs.h
+header-y += intel_intrin.h
+header-y += perfmon_default_smpl.h
+header-y += ptrace_offsets.h
+header-y += rse.h
+header-y += ucontext.h
+
+unifdef-y += gcc_intrin.h
+unifdef-y += intrinsics.h
+unifdef-y += perfmon.h
+unifdef-y += ustack.h
diff --git a/arch/ia64/include/asm/a.out.h b/arch/ia64/include/asm/a.out.h
new file mode 100644
index 000000000000..193dcfb67596
--- /dev/null
+++ b/arch/ia64/include/asm/a.out.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_IA64_A_OUT_H
+#define _ASM_IA64_A_OUT_H
+
+/*
+ * No a.out format has been (or should be) defined so this file is
+ * just a dummy that allows us to get binfmt_elf compiled.  It
+ * probably would be better to clean up binfmt_elf.c so it does not
+ * necessarily depend on there being a.out support.
+ *
+ * Modified 1998-2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
+ */
+
+#include <linux/types.h>
+
+struct exec {
+	unsigned long a_info;
+	unsigned long a_text;
+	unsigned long a_data;
+	unsigned long a_bss;
+	unsigned long a_entry;
+};
+
+#define N_TXTADDR(x)	0
+#define N_DATADDR(x)	0
+#define N_BSSADDR(x)	0
+#define N_DRSIZE(x)	0
+#define N_TRSIZE(x)	0
+#define N_SYMSIZE(x)	0
+#define N_TXTOFF(x)	0
+
+#endif /* _ASM_IA64_A_OUT_H */
diff --git a/arch/ia64/include/asm/acpi-ext.h b/arch/ia64/include/asm/acpi-ext.h
new file mode 100644
index 000000000000..734d137dda6e
--- /dev/null
+++ b/arch/ia64/include/asm/acpi-ext.h
@@ -0,0 +1,21 @@
+/*
+ * (c) Copyright 2003, 2006 Hewlett-Packard Development Company, L.P.
+ *	Alex Williamson <alex.williamson@hp.com>
+ *	Bjorn Helgaas <bjorn.helgaas@hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Vendor specific extensions to ACPI.
+ */
+
+#ifndef _ASM_IA64_ACPI_EXT_H
+#define _ASM_IA64_ACPI_EXT_H
+
+#include <linux/types.h>
+#include <acpi/actypes.h>
+
+extern acpi_status hp_acpi_csr_space (acpi_handle, u64 *base, u64 *length);
+
+#endif /* _ASM_IA64_ACPI_EXT_H */
diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
new file mode 100644
index 000000000000..0f82cc2934e1
--- /dev/null
+++ b/arch/ia64/include/asm/acpi.h
@@ -0,0 +1,165 @@
+/*
+ *  Copyright (C) 1999 VA Linux Systems
+ *  Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ *  Copyright (C) 2000,2001 J.I. Lee <jung-ik.lee@intel.com>
+ *  Copyright (C) 2001,2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#ifndef _ASM_ACPI_H
+#define _ASM_ACPI_H
+
+#ifdef __KERNEL__
+
+#include <acpi/pdc_intel.h>
+
+#include <linux/init.h>
+#include <linux/numa.h>
+#include <asm/system.h>
+#include <asm/numa.h>
+
+#define COMPILER_DEPENDENT_INT64	long
+#define COMPILER_DEPENDENT_UINT64	unsigned long
+
+/*
+ * Calling conventions:
+ *
+ * ACPI_SYSTEM_XFACE        - Interfaces to host OS (handlers, threads)
+ * ACPI_EXTERNAL_XFACE      - External ACPI interfaces
+ * ACPI_INTERNAL_XFACE      - Internal ACPI interfaces
+ * ACPI_INTERNAL_VAR_XFACE  - Internal variable-parameter list interfaces
+ */
+#define ACPI_SYSTEM_XFACE
+#define ACPI_EXTERNAL_XFACE
+#define ACPI_INTERNAL_XFACE
+#define ACPI_INTERNAL_VAR_XFACE
+
+/* Asm macros */
+
+#define ACPI_ASM_MACROS
+#define BREAKPOINT3
+#define ACPI_DISABLE_IRQS() local_irq_disable()
+#define ACPI_ENABLE_IRQS()  local_irq_enable()
+#define ACPI_FLUSH_CPU_CACHE()
+
+static inline int
+ia64_acpi_acquire_global_lock (unsigned int *lock)
+{
+	unsigned int old, new, val;
+	do {
+		old = *lock;
+		new = (((old & ~0x3) + 2) + ((old >> 1) & 0x1));
+		val = ia64_cmpxchg4_acq(lock, new, old);
+	} while (unlikely (val != old));
+	return (new < 3) ? -1 : 0;
+}
+
+static inline int
+ia64_acpi_release_global_lock (unsigned int *lock)
+{
+	unsigned int old, new, val;
+	do {
+		old = *lock;
+		new = old & ~0x3;
+		val = ia64_cmpxchg4_acq(lock, new, old);
+	} while (unlikely (val != old));
+	return old & 0x1;
+}
+
+#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq)				\
+	((Acq) = ia64_acpi_acquire_global_lock(&facs->global_lock))
+
+#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq)				\
+	((Acq) = ia64_acpi_release_global_lock(&facs->global_lock))
+
+#define acpi_disabled 0	/* ACPI always enabled on IA64 */
+#define acpi_noirq 0	/* ACPI always enabled on IA64 */
+#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
+#define acpi_strict 1	/* no ACPI spec workarounds on IA64 */
+#define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
+static inline void disable_acpi(void) { }
+
+const char *acpi_get_sysname (void);
+int acpi_request_vector (u32 int_type);
+int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
+
+/* routines for saving/restoring kernel state */
+extern int acpi_save_state_mem(void);
+extern void acpi_restore_state_mem(void);
+extern unsigned long acpi_wakeup_address;
+
+/*
+ * Record the cpei override flag and current logical cpu. This is
+ * useful for CPU removal.
+ */
+extern unsigned int can_cpei_retarget(void);
+extern unsigned int is_cpu_cpei_target(unsigned int cpu);
+extern void set_cpei_target_cpu(unsigned int cpu);
+extern unsigned int get_cpei_target_cpu(void);
+extern void prefill_possible_map(void);
+#ifdef CONFIG_ACPI_HOTPLUG_CPU
+extern int additional_cpus;
+#else
+#define additional_cpus 0
+#endif
+
+#ifdef CONFIG_ACPI_NUMA
+#if MAX_NUMNODES > 256
+#define MAX_PXM_DOMAINS MAX_NUMNODES
+#else
+#define MAX_PXM_DOMAINS (256)
+#endif
+extern int __devinitdata pxm_to_nid_map[MAX_PXM_DOMAINS];
+extern int __initdata nid_to_pxm_map[MAX_NUMNODES];
+#endif
+
+#define acpi_unlazy_tlb(x)
+
+#ifdef CONFIG_ACPI_NUMA
+extern cpumask_t early_cpu_possible_map;
+#define for_each_possible_early_cpu(cpu)  \
+	for_each_cpu_mask((cpu), early_cpu_possible_map)
+
+static inline void per_cpu_scan_finalize(int min_cpus, int reserve_cpus)
+{
+	int low_cpu, high_cpu;
+	int cpu;
+	int next_nid = 0;
+
+	low_cpu = cpus_weight(early_cpu_possible_map);
+
+	high_cpu = max(low_cpu, min_cpus);
+	high_cpu = min(high_cpu + reserve_cpus, NR_CPUS);
+
+	for (cpu = low_cpu; cpu < high_cpu; cpu++) {
+		cpu_set(cpu, early_cpu_possible_map);
+		if (node_cpuid[cpu].nid == NUMA_NO_NODE) {
+			node_cpuid[cpu].nid = next_nid;
+			next_nid++;
+			if (next_nid >= num_online_nodes())
+				next_nid = 0;
+		}
+	}
+}
+#endif /* CONFIG_ACPI_NUMA */
+
+#endif /*__KERNEL__*/
+
+#endif /*_ASM_ACPI_H*/
diff --git a/arch/ia64/include/asm/agp.h b/arch/ia64/include/asm/agp.h
new file mode 100644
index 000000000000..c11fdd8ab4d7
--- /dev/null
+++ b/arch/ia64/include/asm/agp.h
@@ -0,0 +1,30 @@
+#ifndef _ASM_IA64_AGP_H
+#define _ASM_IA64_AGP_H
+
+/*
+ * IA-64 specific AGP definitions.
+ *
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/*
+ * To avoid memory-attribute aliasing issues, we require that the AGPGART engine operate
+ * in coherent mode, which lets us map the AGP memory as normal (write-back) memory
+ * (unlike x86, where it gets mapped "write-coalescing").
+ */
+#define map_page_into_agp(page)		/* nothing */
+#define unmap_page_from_agp(page)	/* nothing */
+#define flush_agp_cache()		mb()
+
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order)		\
+	((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order)	\
+	free_pages((unsigned long)(table), (order))
+
+#endif /* _ASM_IA64_AGP_H */
diff --git a/arch/ia64/include/asm/asmmacro.h b/arch/ia64/include/asm/asmmacro.h
new file mode 100644
index 000000000000..c1642fd64029
--- /dev/null
+++ b/arch/ia64/include/asm/asmmacro.h
@@ -0,0 +1,135 @@
+#ifndef _ASM_IA64_ASMMACRO_H
+#define _ASM_IA64_ASMMACRO_H
+
+/*
+ * Copyright (C) 2000-2001, 2003-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+
+#define ENTRY(name)				\
+	.align 32;				\
+	.proc name;				\
+name:
+
+#define ENTRY_MIN_ALIGN(name)			\
+	.align 16;				\
+	.proc name;				\
+name:
+
+#define GLOBAL_ENTRY(name)			\
+	.global name;				\
+	ENTRY(name)
+
+#define END(name)				\
+	.endp name
+
+/*
+ * Helper macros to make unwind directives more readable:
+ */
+
+/* prologue_gr: */
+#define ASM_UNW_PRLG_RP			0x8
+#define ASM_UNW_PRLG_PFS		0x4
+#define ASM_UNW_PRLG_PSP		0x2
+#define ASM_UNW_PRLG_PR			0x1
+#define ASM_UNW_PRLG_GRSAVE(ninputs)	(32+(ninputs))
+
+/*
+ * Helper macros for accessing user memory.
+ *
+ * When adding any new .section/.previous entries here, make sure to
+ * also add it to the DISCARD section in arch/ia64/kernel/gate.lds.S or
+ * unpleasant things will happen.
+ */
+
+	.section "__ex_table", "a"		// declare section & section attributes
+	.previous
+
+# define EX(y,x...)				\
+	.xdata4 "__ex_table", 99f-., y-.;	\
+  [99:]	x
+# define EXCLR(y,x...)				\
+	.xdata4 "__ex_table", 99f-., y-.+4;	\
+  [99:]	x
+
+/*
+ * Tag MCA recoverable instruction ranges.
+ */
+
+	.section "__mca_table", "a"		// declare section & section attributes
+	.previous
+
+# define MCA_RECOVER_RANGE(y)			\
+	.xdata4 "__mca_table", y-., 99f-.;	\
+  [99:]
+
+/*
+ * Mark instructions that need a load of a virtual address patched to be
+ * a load of a physical address.  We use this either in critical performance
+ * path (ivt.S - TLB miss processing) or in places where it might not be
+ * safe to use a "tpa" instruction (mca_asm.S - error recovery).
+ */
+	.section ".data.patch.vtop", "a"	// declare section & section attributes
+	.previous
+
+#define	LOAD_PHYSICAL(pr, reg, obj)		\
+[1:](pr)movl reg = obj;				\
+	.xdata4 ".data.patch.vtop", 1b-.
+
+/*
+ * For now, we always put in the McKinley E9 workaround.  On CPUs that don't need it,
+ * we'll patch out the work-around bundles with NOPs, so their impact is minimal.
+ */
+#define DO_MCKINLEY_E9_WORKAROUND
+
+#ifdef DO_MCKINLEY_E9_WORKAROUND
+	.section ".data.patch.mckinley_e9", "a"
+	.previous
+/* workaround for Itanium 2 Errata 9: */
+# define FSYS_RETURN					\
+	.xdata4 ".data.patch.mckinley_e9", 1f-.;	\
+1:{ .mib;						\
+	nop.m 0;					\
+	mov r16=ar.pfs;					\
+	br.call.sptk.many b7=2f;;			\
+  };							\
+2:{ .mib;						\
+	nop.m 0;					\
+	mov ar.pfs=r16;					\
+	br.ret.sptk.many b6;;				\
+  }
+#else
+# define FSYS_RETURN	br.ret.sptk.many b6
+#endif
+
+/*
+ * If physical stack register size is different from DEF_NUM_STACK_REG,
+ * dynamically patch the kernel for correct size.
+ */
+	.section ".data.patch.phys_stack_reg", "a"
+	.previous
+#define LOAD_PHYS_STACK_REG_SIZE(reg)			\
+[1:]	adds reg=IA64_NUM_PHYS_STACK_REG*8+8,r0;	\
+	.xdata4 ".data.patch.phys_stack_reg", 1b-.
+
+/*
+ * Up until early 2004, use of .align within a function caused bad unwind info.
+ * TEXT_ALIGN(n) expands into ".align n" if a fixed GAS is available or into nothing
+ * otherwise.
+ */
+#ifdef HAVE_WORKING_TEXT_ALIGN
+# define TEXT_ALIGN(n)	.align n
+#else
+# define TEXT_ALIGN(n)
+#endif
+
+#ifdef HAVE_SERIALIZE_DIRECTIVE
+# define dv_serialize_data		.serialize.data
+# define dv_serialize_instruction	.serialize.instruction
+#else
+# define dv_serialize_data
+# define dv_serialize_instruction
+#endif
+
+#endif /* _ASM_IA64_ASMMACRO_H */
diff --git a/arch/ia64/include/asm/atomic.h b/arch/ia64/include/asm/atomic.h
new file mode 100644
index 000000000000..50c2b83fd5a0
--- /dev/null
+++ b/arch/ia64/include/asm/atomic.h
@@ -0,0 +1,226 @@
+#ifndef _ASM_IA64_ATOMIC_H
+#define _ASM_IA64_ATOMIC_H
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ * NOTE: don't mess with the types below!  The "unsigned long" and
+ * "int" types were carefully placed so as to ensure proper operation
+ * of the macros.
+ *
+ * Copyright (C) 1998, 1999, 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#include <linux/types.h>
+
+#include <asm/intrinsics.h>
+#include <asm/system.h>
+
+/*
+ * On IA-64, counter must always be volatile to ensure that that the
+ * memory accesses are ordered.
+ */
+typedef struct { volatile __s32 counter; } atomic_t;
+typedef struct { volatile __s64 counter; } atomic64_t;
+
+#define ATOMIC_INIT(i)		((atomic_t) { (i) })
+#define ATOMIC64_INIT(i)	((atomic64_t) { (i) })
+
+#define atomic_read(v)		((v)->counter)
+#define atomic64_read(v)	((v)->counter)
+
+#define atomic_set(v,i)		(((v)->counter) = (i))
+#define atomic64_set(v,i)	(((v)->counter) = (i))
+
+static __inline__ int
+ia64_atomic_add (int i, atomic_t *v)
+{
+	__s32 old, new;
+	CMPXCHG_BUGCHECK_DECL
+
+	do {
+		CMPXCHG_BUGCHECK(v);
+		old = atomic_read(v);
+		new = old + i;
+	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic_t)) != old);
+	return new;
+}
+
+static __inline__ int
+ia64_atomic64_add (__s64 i, atomic64_t *v)
+{
+	__s64 old, new;
+	CMPXCHG_BUGCHECK_DECL
+
+	do {
+		CMPXCHG_BUGCHECK(v);
+		old = atomic64_read(v);
+		new = old + i;
+	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic64_t)) != old);
+	return new;
+}
+
+static __inline__ int
+ia64_atomic_sub (int i, atomic_t *v)
+{
+	__s32 old, new;
+	CMPXCHG_BUGCHECK_DECL
+
+	do {
+		CMPXCHG_BUGCHECK(v);
+		old = atomic_read(v);
+		new = old - i;
+	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic_t)) != old);
+	return new;
+}
+
+static __inline__ int
+ia64_atomic64_sub (__s64 i, atomic64_t *v)
+{
+	__s64 old, new;
+	CMPXCHG_BUGCHECK_DECL
+
+	do {
+		CMPXCHG_BUGCHECK(v);
+		old = atomic64_read(v);
+		new = old - i;
+	} while (ia64_cmpxchg(acq, v, old, new, sizeof(atomic64_t)) != old);
+	return new;
+}
+
+#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+#define atomic64_cmpxchg(v, old, new) \
+	(cmpxchg(&((v)->counter), old, new))
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+	long c, old;
+	c = atomic64_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic64_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+#define atomic_add_return(i,v)						\
+({									\
+	int __ia64_aar_i = (i);						\
+	(__builtin_constant_p(i)					\
+	 && (   (__ia64_aar_i ==  1) || (__ia64_aar_i ==   4)		\
+	     || (__ia64_aar_i ==  8) || (__ia64_aar_i ==  16)		\
+	     || (__ia64_aar_i == -1) || (__ia64_aar_i ==  -4)		\
+	     || (__ia64_aar_i == -8) || (__ia64_aar_i == -16)))		\
+		? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter)	\
+		: ia64_atomic_add(__ia64_aar_i, v);			\
+})
+
+#define atomic64_add_return(i,v)					\
+({									\
+	long __ia64_aar_i = (i);					\
+	(__builtin_constant_p(i)					\
+	 && (   (__ia64_aar_i ==  1) || (__ia64_aar_i ==   4)		\
+	     || (__ia64_aar_i ==  8) || (__ia64_aar_i ==  16)		\
+	     || (__ia64_aar_i == -1) || (__ia64_aar_i ==  -4)		\
+	     || (__ia64_aar_i == -8) || (__ia64_aar_i == -16)))		\
+		? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter)	\
+		: ia64_atomic64_add(__ia64_aar_i, v);			\
+})
+
+/*
+ * Atomically add I to V and return TRUE if the resulting value is
+ * negative.
+ */
+static __inline__ int
+atomic_add_negative (int i, atomic_t *v)
+{
+	return atomic_add_return(i, v) < 0;
+}
+
+static __inline__ int
+atomic64_add_negative (__s64 i, atomic64_t *v)
+{
+	return atomic64_add_return(i, v) < 0;
+}
+
+#define atomic_sub_return(i,v)						\
+({									\
+	int __ia64_asr_i = (i);						\
+	(__builtin_constant_p(i)					\
+	 && (   (__ia64_asr_i ==   1) || (__ia64_asr_i ==   4)		\
+	     || (__ia64_asr_i ==   8) || (__ia64_asr_i ==  16)		\
+	     || (__ia64_asr_i ==  -1) || (__ia64_asr_i ==  -4)		\
+	     || (__ia64_asr_i ==  -8) || (__ia64_asr_i == -16)))	\
+		? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter)	\
+		: ia64_atomic_sub(__ia64_asr_i, v);			\
+})
+
+#define atomic64_sub_return(i,v)					\
+({									\
+	long __ia64_asr_i = (i);					\
+	(__builtin_constant_p(i)					\
+	 && (   (__ia64_asr_i ==   1) || (__ia64_asr_i ==   4)		\
+	     || (__ia64_asr_i ==   8) || (__ia64_asr_i ==  16)		\
+	     || (__ia64_asr_i ==  -1) || (__ia64_asr_i ==  -4)		\
+	     || (__ia64_asr_i ==  -8) || (__ia64_asr_i == -16)))	\
+		? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter)	\
+		: ia64_atomic64_sub(__ia64_asr_i, v);			\
+})
+
+#define atomic_dec_return(v)		atomic_sub_return(1, (v))
+#define atomic_inc_return(v)		atomic_add_return(1, (v))
+#define atomic64_dec_return(v)		atomic64_sub_return(1, (v))
+#define atomic64_inc_return(v)		atomic64_add_return(1, (v))
+
+#define atomic_sub_and_test(i,v)	(atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_sub_return(1, (v)) == 0)
+#define atomic_inc_and_test(v)		(atomic_add_return(1, (v)) == 0)
+#define atomic64_sub_and_test(i,v)	(atomic64_sub_return((i), (v)) == 0)
+#define atomic64_dec_and_test(v)	(atomic64_sub_return(1, (v)) == 0)
+#define atomic64_inc_and_test(v)	(atomic64_add_return(1, (v)) == 0)
+
+#define atomic_add(i,v)			atomic_add_return((i), (v))
+#define atomic_sub(i,v)			atomic_sub_return((i), (v))
+#define atomic_inc(v)			atomic_add(1, (v))
+#define atomic_dec(v)			atomic_sub(1, (v))
+
+#define atomic64_add(i,v)		atomic64_add_return((i), (v))
+#define atomic64_sub(i,v)		atomic64_sub_return((i), (v))
+#define atomic64_inc(v)			atomic64_add(1, (v))
+#define atomic64_dec(v)			atomic64_sub(1, (v))
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#include <asm-generic/atomic.h>
+#endif /* _ASM_IA64_ATOMIC_H */
diff --git a/arch/ia64/include/asm/auxvec.h b/arch/ia64/include/asm/auxvec.h
new file mode 100644
index 000000000000..23cebe5685b9
--- /dev/null
+++ b/arch/ia64/include/asm/auxvec.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_IA64_AUXVEC_H
+#define _ASM_IA64_AUXVEC_H
+
+/*
+ * Architecture-neutral AT_ values are in the range 0-17.  Leave some room for more of
+ * them, start the architecture-specific ones at 32.
+ */
+#define AT_SYSINFO	32
+#define AT_SYSINFO_EHDR	33
+
+#endif /* _ASM_IA64_AUXVEC_H */
diff --git a/arch/ia64/include/asm/bitops.h b/arch/ia64/include/asm/bitops.h
new file mode 100644
index 000000000000..e2ca80037335
--- /dev/null
+++ b/arch/ia64/include/asm/bitops.h
@@ -0,0 +1,468 @@
+#ifndef _ASM_IA64_BITOPS_H
+#define _ASM_IA64_BITOPS_H
+
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * 02/06/02 find_next_bit() and find_first_bit() added from Erich Focht's ia64
+ * O(1) scheduler patch
+ */
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <asm/intrinsics.h>
+
+/**
+ * set_bit - Atomically set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * This function is atomic and may not be reordered.  See __set_bit()
+ * if you do not require the atomic guarantees.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ *
+ * The address must be (at least) "long" aligned.
+ * Note that there are driver (e.g., eepro100) which use these operations to
+ * operate on hw-defined data-structures, so we can't easily change these
+ * operations to force a bigger alignment.
+ *
+ * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
+ */
+static __inline__ void
+set_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = 1 << (nr & 31);
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old | bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * __set_bit - Set a bit in memory
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ *
+ * Unlike set_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void
+__set_bit (int nr, volatile void *addr)
+{
+	*((__u32 *) addr + (nr >> 5)) |= (1 << (nr & 31));
+}
+
+/*
+ * clear_bit() has "acquire" semantics.
+ */
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	do { /* skip */; } while (0)
+
+/**
+ * clear_bit - Clears a bit in memory
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit() is atomic and may not be reordered.  However, it does
+ * not contain a memory barrier, so if it is used for locking purposes,
+ * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit()
+ * in order to ensure changes are visible on other processors.
+ */
+static __inline__ void
+clear_bit (int nr, volatile void *addr)
+{
+	__u32 mask, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	mask = ~(1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old & mask;
+	} while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * clear_bit_unlock - Clears a bit in memory with release
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * clear_bit_unlock() is atomic and may not be reordered.  It does
+ * contain a memory barrier suitable for unlock type operations.
+ */
+static __inline__ void
+clear_bit_unlock (int nr, volatile void *addr)
+{
+	__u32 mask, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	mask = ~(1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old & mask;
+	} while (cmpxchg_rel(m, old, new) != old);
+}
+
+/**
+ * __clear_bit_unlock - Non-atomically clears a bit in memory with release
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ *
+ * Similarly to clear_bit_unlock, the implementation uses a store
+ * with release semantics. See also __raw_spin_unlock().
+ */
+static __inline__ void
+__clear_bit_unlock(int nr, void *addr)
+{
+	__u32 * const m = (__u32 *) addr + (nr >> 5);
+	__u32 const new = *m & ~(1 << (nr & 31));
+
+	ia64_st4_rel_nta(m, new);
+}
+
+/**
+ * __clear_bit - Clears a bit in memory (non-atomic version)
+ * @nr: the bit to clear
+ * @addr: the address to start counting from
+ *
+ * Unlike clear_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void
+__clear_bit (int nr, volatile void *addr)
+{
+	*((__u32 *) addr + (nr >> 5)) &= ~(1 << (nr & 31));
+}
+
+/**
+ * change_bit - Toggle a bit in memory
+ * @nr: Bit to toggle
+ * @addr: Address to start counting from
+ *
+ * change_bit() is atomic and may not be reordered.
+ * Note that @nr may be almost arbitrarily large; this function is not
+ * restricted to acting on a single-word quantity.
+ */
+static __inline__ void
+change_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = (1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old ^ bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+}
+
+/**
+ * __change_bit - Toggle a bit in memory
+ * @nr: the bit to toggle
+ * @addr: the address to start counting from
+ *
+ * Unlike change_bit(), this function is non-atomic and may be reordered.
+ * If it's called on the same region of memory simultaneously, the effect
+ * may be that only one operation succeeds.
+ */
+static __inline__ void
+__change_bit (int nr, volatile void *addr)
+{
+	*((__u32 *) addr + (nr >> 5)) ^= (1 << (nr & 31));
+}
+
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies the acquisition side of the memory barrier.
+ */
+static __inline__ int
+test_and_set_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = 1 << (nr & 31);
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old | bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+	return (old & bit) != 0;
+}
+
+/**
+ * test_and_set_bit_lock - Set a bit and return its old value for lock
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This is the same as test_and_set_bit on ia64
+ */
+#define test_and_set_bit_lock test_and_set_bit
+
+/**
+ * __test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.  
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static __inline__ int
+__test_and_set_bit (int nr, volatile void *addr)
+{
+	__u32 *p = (__u32 *) addr + (nr >> 5);
+	__u32 m = 1 << (nr & 31);
+	int oldbitset = (*p & m) != 0;
+
+	*p |= m;
+	return oldbitset;
+}
+
+/**
+ * test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies the acquisition side of the memory barrier.
+ */
+static __inline__ int
+test_and_clear_bit (int nr, volatile void *addr)
+{
+	__u32 mask, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	mask = ~(1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old & mask;
+	} while (cmpxchg_acq(m, old, new) != old);
+	return (old & ~mask) != 0;
+}
+
+/**
+ * __test_and_clear_bit - Clear a bit and return its old value
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.  
+ * If two examples of this operation race, one can appear to succeed
+ * but actually fail.  You must protect multiple accesses with a lock.
+ */
+static __inline__ int
+__test_and_clear_bit(int nr, volatile void * addr)
+{
+	__u32 *p = (__u32 *) addr + (nr >> 5);
+	__u32 m = 1 << (nr & 31);
+	int oldbitset = *p & m;
+
+	*p &= ~m;
+	return oldbitset;
+}
+
+/**
+ * test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is atomic and cannot be reordered.  
+ * It also implies the acquisition side of the memory barrier.
+ */
+static __inline__ int
+test_and_change_bit (int nr, volatile void *addr)
+{
+	__u32 bit, old, new;
+	volatile __u32 *m;
+	CMPXCHG_BUGCHECK_DECL
+
+	m = (volatile __u32 *) addr + (nr >> 5);
+	bit = (1 << (nr & 31));
+	do {
+		CMPXCHG_BUGCHECK(m);
+		old = *m;
+		new = old ^ bit;
+	} while (cmpxchg_acq(m, old, new) != old);
+	return (old & bit) != 0;
+}
+
+/**
+ * __test_and_change_bit - Change a bit and return its old value
+ * @nr: Bit to change
+ * @addr: Address to count from
+ *
+ * This operation is non-atomic and can be reordered.
+ */
+static __inline__ int
+__test_and_change_bit (int nr, void *addr)
+{
+	__u32 old, bit = (1 << (nr & 31));
+	__u32 *m = (__u32 *) addr + (nr >> 5);
+
+	old = *m;
+	*m = old ^ bit;
+	return (old & bit) != 0;
+}
+
+static __inline__ int
+test_bit (int nr, const volatile void *addr)
+{
+	return 1 & (((const volatile __u32 *) addr)[nr >> 5] >> (nr & 31));
+}
+
+/**
+ * ffz - find the first zero bit in a long word
+ * @x: The long word to find the bit in
+ *
+ * Returns the bit-number (0..63) of the first (least significant) zero bit.
+ * Undefined if no zero exists, so code should check against ~0UL first...
+ */
+static inline unsigned long
+ffz (unsigned long x)
+{
+	unsigned long result;
+
+	result = ia64_popcnt(x & (~x - 1));
+	return result;
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @x: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static __inline__ unsigned long
+__ffs (unsigned long x)
+{
+	unsigned long result;
+
+	result = ia64_popcnt((x-1) & ~x);
+	return result;
+}
+
+#ifdef __KERNEL__
+
+/*
+ * Return bit number of last (most-significant) bit set.  Undefined
+ * for x==0.  Bits are numbered from 0..63 (e.g., ia64_fls(9) == 3).
+ */
+static inline unsigned long
+ia64_fls (unsigned long x)
+{
+	long double d = x;
+	long exp;
+
+	exp = ia64_getf_exp(d);
+	return exp - 0xffff;
+}
+
+/*
+ * Find the last (most significant) bit set.  Returns 0 for x==0 and
+ * bits are numbered from 1..32 (e.g., fls(9) == 4).
+ */
+static inline int
+fls (int t)
+{
+	unsigned long x = t & 0xffffffffu;
+
+	if (!x)
+		return 0;
+	x |= x >> 1;
+	x |= x >> 2;
+	x |= x >> 4;
+	x |= x >> 8;
+	x |= x >> 16;
+	return ia64_popcnt(x);
+}
+
+/*
+ * Find the last (most significant) bit set.  Undefined for x==0.
+ * Bits are numbered from 0..63 (e.g., __fls(9) == 3).
+ */
+static inline unsigned long
+__fls (unsigned long x)
+{
+	x |= x >> 1;
+	x |= x >> 2;
+	x |= x >> 4;
+	x |= x >> 8;
+	x |= x >> 16;
+	x |= x >> 32;
+	return ia64_popcnt(x) - 1;
+}
+
+#include <asm-generic/bitops/fls64.h>
+
+/*
+ * ffs: find first bit set. This is defined the same way as the libc and
+ * compiler builtin ffs routines, therefore differs in spirit from the above
+ * ffz (man ffs): it operates on "int" values only and the result value is the
+ * bit number + 1.  ffs(0) is defined to return zero.
+ */
+#define ffs(x)	__builtin_ffs(x)
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+static __inline__ unsigned long
+hweight64 (unsigned long x)
+{
+	unsigned long result;
+	result = ia64_popcnt(x);
+	return result;
+}
+
+#define hweight32(x)	(unsigned int) hweight64((x) & 0xfffffffful)
+#define hweight16(x)	(unsigned int) hweight64((x) & 0xfffful)
+#define hweight8(x)	(unsigned int) hweight64((x) & 0xfful)
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/find.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+
+#define ext2_set_bit_atomic(l,n,a)	test_and_set_bit(n,a)
+#define ext2_clear_bit_atomic(l,n,a)	test_and_clear_bit(n,a)
+
+#include <asm-generic/bitops/minix.h>
+#include <asm-generic/bitops/sched.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_BITOPS_H */
diff --git a/arch/ia64/include/asm/break.h b/arch/ia64/include/asm/break.h
new file mode 100644
index 000000000000..f03402039896
--- /dev/null
+++ b/arch/ia64/include/asm/break.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_IA64_BREAK_H
+#define _ASM_IA64_BREAK_H
+
+/*
+ * IA-64 Linux break numbers.
+ *
+ * Copyright (C) 1999 Hewlett-Packard Co
+ * Copyright (C) 1999 David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/*
+ * OS-specific debug break numbers:
+ */
+#define __IA64_BREAK_KDB		0x80100
+#define __IA64_BREAK_KPROBE		0x81000 /* .. 0x81fff */
+#define __IA64_BREAK_JPROBE		0x82000
+
+/*
+ * OS-specific break numbers:
+ */
+#define __IA64_BREAK_SYSCALL		0x100000
+
+#endif /* _ASM_IA64_BREAK_H */
diff --git a/arch/ia64/include/asm/bug.h b/arch/ia64/include/asm/bug.h
new file mode 100644
index 000000000000..823616b5020b
--- /dev/null
+++ b/arch/ia64/include/asm/bug.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_IA64_BUG_H
+#define _ASM_IA64_BUG_H
+
+#ifdef CONFIG_BUG
+#define ia64_abort()	__builtin_trap()
+#define BUG() do { printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); ia64_abort(); } while (0)
+
+/* should this BUG be made generic? */
+#define HAVE_ARCH_BUG
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/arch/ia64/include/asm/bugs.h b/arch/ia64/include/asm/bugs.h
new file mode 100644
index 000000000000..433523e3b2ed
--- /dev/null
+++ b/arch/ia64/include/asm/bugs.h
@@ -0,0 +1,19 @@
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ *
+ * Based on <asm-alpha/bugs.h>.
+ *
+ * Modified 1998, 1999, 2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>,  Hewlett-Packard Co.
+ */
+#ifndef _ASM_IA64_BUGS_H
+#define _ASM_IA64_BUGS_H
+
+#include <asm/processor.h>
+
+extern void check_bugs (void);
+
+#endif /* _ASM_IA64_BUGS_H */
diff --git a/arch/ia64/include/asm/byteorder.h b/arch/ia64/include/asm/byteorder.h
new file mode 100644
index 000000000000..69bd41d7c26e
--- /dev/null
+++ b/arch/ia64/include/asm/byteorder.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_IA64_BYTEORDER_H
+#define _ASM_IA64_BYTEORDER_H
+
+/*
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
+ */
+
+#include <asm/types.h>
+#include <asm/intrinsics.h>
+#include <linux/compiler.h>
+
+static __inline__ __attribute_const__ __u64
+__ia64_swab64 (__u64 x)
+{
+	__u64 result;
+
+	result = ia64_mux1(x, ia64_mux1_rev);
+	return result;
+}
+
+static __inline__ __attribute_const__ __u32
+__ia64_swab32 (__u32 x)
+{
+	return __ia64_swab64(x) >> 32;
+}
+
+static __inline__ __attribute_const__ __u16
+__ia64_swab16(__u16 x)
+{
+	return __ia64_swab64(x) >> 48;
+}
+
+#define __arch__swab64(x) __ia64_swab64(x)
+#define __arch__swab32(x) __ia64_swab32(x)
+#define __arch__swab16(x) __ia64_swab16(x)
+
+#define __BYTEORDER_HAS_U64__
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* _ASM_IA64_BYTEORDER_H */
diff --git a/arch/ia64/include/asm/cache.h b/arch/ia64/include/asm/cache.h
new file mode 100644
index 000000000000..e7482bd628ff
--- /dev/null
+++ b/arch/ia64/include/asm/cache.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_IA64_CACHE_H
+#define _ASM_IA64_CACHE_H
+
+
+/*
+ * Copyright (C) 1998-2000 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/* Bytes per L1 (data) cache line.  */
+#define L1_CACHE_SHIFT		CONFIG_IA64_L1_CACHE_SHIFT
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#ifdef CONFIG_SMP
+# define SMP_CACHE_SHIFT	L1_CACHE_SHIFT
+# define SMP_CACHE_BYTES	L1_CACHE_BYTES
+#else
+  /*
+   * The "aligned" directive can only _increase_ alignment, so this is
+   * safe and provides an easy way to avoid wasting space on a
+   * uni-processor:
+   */
+# define SMP_CACHE_SHIFT	3
+# define SMP_CACHE_BYTES	(1 << 3)
+#endif
+
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
+#endif /* _ASM_IA64_CACHE_H */
diff --git a/arch/ia64/include/asm/cacheflush.h b/arch/ia64/include/asm/cacheflush.h
new file mode 100644
index 000000000000..afcfbda76e20
--- /dev/null
+++ b/arch/ia64/include/asm/cacheflush.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_IA64_CACHEFLUSH_H
+#define _ASM_IA64_CACHEFLUSH_H
+
+/*
+ * Copyright (C) 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/page-flags.h>
+#include <linux/bitops.h>
+
+#include <asm/page.h>
+
+/*
+ * Cache flushing routines.  This is the kind of stuff that can be very expensive, so try
+ * to avoid them whenever possible.
+ */
+
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_icache_page(vma,page)		do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define flush_dcache_page(page)			\
+do {						\
+	clear_bit(PG_arch_1, &(page)->flags);	\
+} while (0)
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+extern void flush_icache_range (unsigned long start, unsigned long end);
+
+#define flush_icache_user_range(vma, page, user_addr, len)					\
+do {												\
+	unsigned long _addr = (unsigned long) page_address(page) + ((user_addr) & ~PAGE_MASK);	\
+	flush_icache_range(_addr, _addr + (len));						\
+} while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { memcpy(dst, src, len); \
+     flush_icache_user_range(vma, page, vaddr, len); \
+} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#endif /* _ASM_IA64_CACHEFLUSH_H */
diff --git a/arch/ia64/include/asm/checksum.h b/arch/ia64/include/asm/checksum.h
new file mode 100644
index 000000000000..97af155057e4
--- /dev/null
+++ b/arch/ia64/include/asm/checksum.h
@@ -0,0 +1,79 @@
+#ifndef _ASM_IA64_CHECKSUM_H
+#define _ASM_IA64_CHECKSUM_H
+
+/*
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.
+ */
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ * Computes the checksum of the TCP/UDP pseudo-header returns a 16-bit
+ * checksum, already complemented
+ */
+extern __sum16 csum_tcpudp_magic (__be32 saddr, __be32 daddr,
+					     unsigned short len,
+					     unsigned short proto,
+					     __wsum sum);
+
+extern __wsum csum_tcpudp_nofold (__be32 saddr, __be32 daddr,
+					unsigned short len,
+					unsigned short proto,
+					__wsum sum);
+
+/*
+ * Computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * Same as csum_partial, but copies from src while it checksums.
+ *
+ * Here it is even more important to align src and dst on a 32-bit (or
+ * even better 64-bit) boundary.
+ */
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+						 int len, __wsum sum,
+						 int *errp);
+
+extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+					       int len, __wsum sum);
+
+/*
+ * This routine is used for miscellaneous IP-like checksums, mainly in
+ * icmp.c
+ */
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+/*
+ * Fold a partial checksum without adding pseudo headers.
+ */
+static inline __sum16 csum_fold(__wsum csum)
+{
+	u32 sum = (__force u32)csum;
+	sum = (sum & 0xffff) + (sum >> 16);
+	sum = (sum & 0xffff) + (sum >> 16);
+	return (__force __sum16)~sum;
+}
+
+#define _HAVE_ARCH_IPV6_CSUM	1
+struct in6_addr;
+extern __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+	const struct in6_addr *daddr, __u32 len, unsigned short proto,
+	__wsum csum);
+
+#endif /* _ASM_IA64_CHECKSUM_H */
diff --git a/arch/ia64/include/asm/compat.h b/arch/ia64/include/asm/compat.h
new file mode 100644
index 000000000000..dfcf75b8426d
--- /dev/null
+++ b/arch/ia64/include/asm/compat.h
@@ -0,0 +1,207 @@
+#ifndef _ASM_IA64_COMPAT_H
+#define _ASM_IA64_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_key_t;
+typedef s32		compat_pid_t;
+typedef u16		__compat_uid_t;
+typedef u16		__compat_gid_t;
+typedef u32		__compat_uid32_t;
+typedef u32		__compat_gid32_t;
+typedef u16		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u16		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef u16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_timer_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef s64 __attribute__((aligned(4))) compat_s64;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+typedef u64 __attribute__((aligned(4))) compat_u64;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	u16		__pad1;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	__compat_uid_t	st_uid;
+	__compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	u16		__pad2;
+	u32		st_size;
+	u32		st_blksize;
+	u32		st_blocks;
+	u32		st_atime;
+	u32		st_atime_nsec;
+	u32		st_mtime;
+	u32		st_mtime_nsec;
+	u32		st_ctime;
+	u32		st_ctime_nsec;
+	u32		__unused4;
+	u32		__unused5;
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+#define F_GETLK64	12
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/*
+ * IA32 uses 4 byte alignment for 64 bit quantities,
+ * so we need to pack this structure.
+ */
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+} __attribute__((packed));
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_spare[5];
+};
+
+#define COMPAT_RLIM_OLD_INFINITY       0x7fffffff
+#define COMPAT_RLIM_INFINITY           0xffffffff
+
+typedef u32		compat_old_sigset_t;	/* at least 32 bits */
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__compat_uid32_t uid;
+	__compat_gid32_t gid;
+	__compat_uid32_t cuid;
+	__compat_gid32_t cgid;
+	unsigned short mode;
+	unsigned short __pad1;
+	unsigned short seq;
+	unsigned short __pad2;
+	compat_ulong_t unused1;
+	compat_ulong_t unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	compat_time_t  sem_otime;
+	compat_ulong_t __unused1;
+	compat_time_t  sem_ctime;
+	compat_ulong_t __unused2;
+	compat_ulong_t sem_nsems;
+	compat_ulong_t __unused3;
+	compat_ulong_t __unused4;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	compat_time_t  msg_stime;
+	compat_ulong_t __unused1;
+	compat_time_t  msg_rtime;
+	compat_ulong_t __unused2;
+	compat_time_t  msg_ctime;
+	compat_ulong_t __unused3;
+	compat_ulong_t msg_cbytes;
+	compat_ulong_t msg_qnum;
+	compat_ulong_t msg_qbytes;
+	compat_pid_t   msg_lspid;
+	compat_pid_t   msg_lrpid;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	compat_size_t  shm_segsz;
+	compat_time_t  shm_atime;
+	compat_ulong_t __unused1;
+	compat_time_t  shm_dtime;
+	compat_ulong_t __unused2;
+	compat_time_t  shm_ctime;
+	compat_ulong_t __unused3;
+	compat_pid_t   shm_cpid;
+	compat_pid_t   shm_lpid;
+	compat_ulong_t shm_nattch;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+/*
+ * A pointer passed in from user mode. This should not be used for syscall parameters,
+ * just declare them as pointers because the syscall entry code will have appropriately
+ * converted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *
+compat_ptr (compat_uptr_t uptr)
+{
+	return (void __user *) (unsigned long) uptr;
+}
+
+static inline compat_uptr_t
+ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static __inline__ void __user *
+compat_alloc_user_space (long len)
+{
+	struct pt_regs *regs = task_pt_regs(current);
+	return (void __user *) (((regs->r12 & 0xffffffff) & -16) - len);
+}
+
+#endif /* _ASM_IA64_COMPAT_H */
diff --git a/arch/ia64/include/asm/cpu.h b/arch/ia64/include/asm/cpu.h
new file mode 100644
index 000000000000..fcca30b9f110
--- /dev/null
+++ b/arch/ia64/include/asm/cpu.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_CPU_H_
+#define _ASM_IA64_CPU_H_
+
+#include <linux/device.h>
+#include <linux/cpu.h>
+#include <linux/topology.h>
+#include <linux/percpu.h>
+
+struct ia64_cpu {
+	struct cpu cpu;
+};
+
+DECLARE_PER_CPU(struct ia64_cpu, cpu_devices);
+
+DECLARE_PER_CPU(int, cpu_state);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern int arch_register_cpu(int num);
+extern void arch_unregister_cpu(int);
+#endif
+
+#endif /* _ASM_IA64_CPU_H_ */
diff --git a/arch/ia64/include/asm/cputime.h b/arch/ia64/include/asm/cputime.h
new file mode 100644
index 000000000000..d20b998cb91d
--- /dev/null
+++ b/arch/ia64/include/asm/cputime.h
@@ -0,0 +1,109 @@
+/*
+ * Definitions for measuring cputime on ia64 machines.
+ *
+ * Based on <asm-powerpc/cputime.h>.
+ *
+ * Copyright (C) 2007 FUJITSU LIMITED
+ * Copyright (C) 2007 Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in nsec.
+ * Otherwise we measure cpu time in jiffies using the generic definitions.
+ */
+
+#ifndef __IA64_CPUTIME_H
+#define __IA64_CPUTIME_H
+
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+#include <asm-generic/cputime.h>
+#else
+
+#include <linux/time.h>
+#include <linux/jiffies.h>
+#include <asm/processor.h>
+
+typedef u64 cputime_t;
+typedef u64 cputime64_t;
+
+#define cputime_zero			((cputime_t)0)
+#define cputime_max			((~((cputime_t)0) >> 1) - 1)
+#define cputime_add(__a, __b)		((__a) +  (__b))
+#define cputime_sub(__a, __b)		((__a) -  (__b))
+#define cputime_div(__a, __n)		((__a) /  (__n))
+#define cputime_halve(__a)		((__a) >> 1)
+#define cputime_eq(__a, __b)		((__a) == (__b))
+#define cputime_gt(__a, __b)		((__a) >  (__b))
+#define cputime_ge(__a, __b)		((__a) >= (__b))
+#define cputime_lt(__a, __b)		((__a) <  (__b))
+#define cputime_le(__a, __b)		((__a) <= (__b))
+
+#define cputime64_zero			((cputime64_t)0)
+#define cputime64_add(__a, __b)		((__a) + (__b))
+#define cputime64_sub(__a, __b)		((__a) - (__b))
+#define cputime_to_cputime64(__ct)	(__ct)
+
+/*
+ * Convert cputime <-> jiffies (HZ)
+ */
+#define cputime_to_jiffies(__ct)	((__ct) / (NSEC_PER_SEC / HZ))
+#define jiffies_to_cputime(__jif)	((__jif) * (NSEC_PER_SEC / HZ))
+#define cputime64_to_jiffies64(__ct)	((__ct) / (NSEC_PER_SEC / HZ))
+#define jiffies64_to_cputime64(__jif)	((__jif) * (NSEC_PER_SEC / HZ))
+
+/*
+ * Convert cputime <-> milliseconds
+ */
+#define cputime_to_msecs(__ct)		((__ct) / NSEC_PER_MSEC)
+#define msecs_to_cputime(__msecs)	((__msecs) * NSEC_PER_MSEC)
+
+/*
+ * Convert cputime <-> seconds
+ */
+#define cputime_to_secs(__ct)		((__ct) / NSEC_PER_SEC)
+#define secs_to_cputime(__secs)		((__secs) * NSEC_PER_SEC)
+
+/*
+ * Convert cputime <-> timespec (nsec)
+ */
+static inline cputime_t timespec_to_cputime(const struct timespec *val)
+{
+	cputime_t ret = val->tv_sec * NSEC_PER_SEC;
+	return (ret + val->tv_nsec);
+}
+static inline void cputime_to_timespec(const cputime_t ct, struct timespec *val)
+{
+	val->tv_sec  = ct / NSEC_PER_SEC;
+	val->tv_nsec = ct % NSEC_PER_SEC;
+}
+
+/*
+ * Convert cputime <-> timeval (msec)
+ */
+static inline cputime_t timeval_to_cputime(struct timeval *val)
+{
+	cputime_t ret = val->tv_sec * NSEC_PER_SEC;
+	return (ret + val->tv_usec * NSEC_PER_USEC);
+}
+static inline void cputime_to_timeval(const cputime_t ct, struct timeval *val)
+{
+	val->tv_sec = ct / NSEC_PER_SEC;
+	val->tv_usec = (ct % NSEC_PER_SEC) / NSEC_PER_USEC;
+}
+
+/*
+ * Convert cputime <-> clock (USER_HZ)
+ */
+#define cputime_to_clock_t(__ct)	((__ct) / (NSEC_PER_SEC / USER_HZ))
+#define clock_t_to_cputime(__x)		((__x) * (NSEC_PER_SEC / USER_HZ))
+
+/*
+ * Convert cputime64 to clock.
+ */
+#define cputime64_to_clock_t(__ct)      cputime_to_clock_t((cputime_t)__ct)
+
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* __IA64_CPUTIME_H */
diff --git a/arch/ia64/include/asm/current.h b/arch/ia64/include/asm/current.h
new file mode 100644
index 000000000000..c659f90fbfd9
--- /dev/null
+++ b/arch/ia64/include/asm/current.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_IA64_CURRENT_H
+#define _ASM_IA64_CURRENT_H
+
+/*
+ * Modified 1998-2000
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/intrinsics.h>
+
+/*
+ * In kernel mode, thread pointer (r13) is used to point to the current task
+ * structure.
+ */
+#define current	((struct task_struct *) ia64_getreg(_IA64_REG_TP))
+
+#endif /* _ASM_IA64_CURRENT_H */
diff --git a/arch/ia64/include/asm/cyclone.h b/arch/ia64/include/asm/cyclone.h
new file mode 100644
index 000000000000..88f6500e84ab
--- /dev/null
+++ b/arch/ia64/include/asm/cyclone.h
@@ -0,0 +1,15 @@
+#ifndef ASM_IA64_CYCLONE_H
+#define ASM_IA64_CYCLONE_H
+
+#ifdef	CONFIG_IA64_CYCLONE
+extern int use_cyclone;
+extern void __init cyclone_setup(void);
+#else	/* CONFIG_IA64_CYCLONE */
+#define use_cyclone 0
+static inline void cyclone_setup(void)
+{
+	printk(KERN_ERR "Cyclone Counter: System not configured"
+					" w/ CONFIG_IA64_CYCLONE.\n");
+}
+#endif	/* CONFIG_IA64_CYCLONE */
+#endif	/* !ASM_IA64_CYCLONE_H */
diff --git a/arch/ia64/include/asm/delay.h b/arch/ia64/include/asm/delay.h
new file mode 100644
index 000000000000..a30a62f235e1
--- /dev/null
+++ b/arch/ia64/include/asm/delay.h
@@ -0,0 +1,88 @@
+#ifndef _ASM_IA64_DELAY_H
+#define _ASM_IA64_DELAY_H
+
+/*
+ * Delay routines using a pre-computed "cycles/usec" value.
+ *
+ * Copyright (C) 1998, 1999 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/compiler.h>
+
+#include <asm/intrinsics.h>
+#include <asm/processor.h>
+
+static __inline__ void
+ia64_set_itm (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_CR_ITM, val);
+	ia64_srlz_d();
+}
+
+static __inline__ unsigned long
+ia64_get_itm (void)
+{
+	unsigned long result;
+
+	result = ia64_getreg(_IA64_REG_CR_ITM);
+	ia64_srlz_d();
+	return result;
+}
+
+static __inline__ void
+ia64_set_itv (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_CR_ITV, val);
+	ia64_srlz_d();
+}
+
+static __inline__ unsigned long
+ia64_get_itv (void)
+{
+	return ia64_getreg(_IA64_REG_CR_ITV);
+}
+
+static __inline__ void
+ia64_set_itc (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_AR_ITC, val);
+	ia64_srlz_d();
+}
+
+static __inline__ unsigned long
+ia64_get_itc (void)
+{
+	unsigned long result;
+
+	result = ia64_getreg(_IA64_REG_AR_ITC);
+	ia64_barrier();
+#ifdef CONFIG_ITANIUM
+	while (unlikely((__s32) result == -1)) {
+		result = ia64_getreg(_IA64_REG_AR_ITC);
+		ia64_barrier();
+	}
+#endif
+	return result;
+}
+
+extern void ia64_delay_loop (unsigned long loops);
+
+static __inline__ void
+__delay (unsigned long loops)
+{
+	if (unlikely(loops < 1))
+		return;
+
+	ia64_delay_loop (loops - 1);
+}
+
+extern void udelay (unsigned long usecs);
+
+#endif /* _ASM_IA64_DELAY_H */
diff --git a/arch/ia64/include/asm/device.h b/arch/ia64/include/asm/device.h
new file mode 100644
index 000000000000..3db6daf7f251
--- /dev/null
+++ b/arch/ia64/include/asm/device.h
@@ -0,0 +1,15 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#ifndef _ASM_IA64_DEVICE_H
+#define _ASM_IA64_DEVICE_H
+
+struct dev_archdata {
+#ifdef CONFIG_ACPI
+	void	*acpi_handle;
+#endif
+};
+
+#endif /* _ASM_IA64_DEVICE_H */
diff --git a/arch/ia64/include/asm/div64.h b/arch/ia64/include/asm/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/arch/ia64/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..9f0df9bd46b7
--- /dev/null
+++ b/arch/ia64/include/asm/dma-mapping.h
@@ -0,0 +1,97 @@
+#ifndef _ASM_IA64_DMA_MAPPING_H
+#define _ASM_IA64_DMA_MAPPING_H
+
+/*
+ * Copyright (C) 2003-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#include <asm/machvec.h>
+#include <linux/scatterlist.h>
+
+#define dma_alloc_coherent	platform_dma_alloc_coherent
+/* coherent mem. is cheap */
+static inline void *
+dma_alloc_noncoherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
+		      gfp_t flag)
+{
+	return dma_alloc_coherent(dev, size, dma_handle, flag);
+}
+#define dma_free_coherent	platform_dma_free_coherent
+static inline void
+dma_free_noncoherent(struct device *dev, size_t size, void *cpu_addr,
+		     dma_addr_t dma_handle)
+{
+	dma_free_coherent(dev, size, cpu_addr, dma_handle);
+}
+#define dma_map_single_attrs	platform_dma_map_single_attrs
+static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+					size_t size, int dir)
+{
+	return dma_map_single_attrs(dev, cpu_addr, size, dir, NULL);
+}
+#define dma_map_sg_attrs	platform_dma_map_sg_attrs
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sgl,
+			     int nents, int dir)
+{
+	return dma_map_sg_attrs(dev, sgl, nents, dir, NULL);
+}
+#define dma_unmap_single_attrs	platform_dma_unmap_single_attrs
+static inline void dma_unmap_single(struct device *dev, dma_addr_t cpu_addr,
+				    size_t size, int dir)
+{
+	return dma_unmap_single_attrs(dev, cpu_addr, size, dir, NULL);
+}
+#define dma_unmap_sg_attrs	platform_dma_unmap_sg_attrs
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sgl,
+				int nents, int dir)
+{
+	return dma_unmap_sg_attrs(dev, sgl, nents, dir, NULL);
+}
+#define dma_sync_single_for_cpu	platform_dma_sync_single_for_cpu
+#define dma_sync_sg_for_cpu	platform_dma_sync_sg_for_cpu
+#define dma_sync_single_for_device platform_dma_sync_single_for_device
+#define dma_sync_sg_for_device	platform_dma_sync_sg_for_device
+#define dma_mapping_error	platform_dma_mapping_error
+
+#define dma_map_page(dev, pg, off, size, dir)				\
+	dma_map_single(dev, page_address(pg) + (off), (size), (dir))
+#define dma_unmap_page(dev, dma_addr, size, dir)			\
+	dma_unmap_single(dev, dma_addr, size, dir)
+
+/*
+ * Rest of this file is part of the "Advanced DMA API".  Use at your own risk.
+ * See Documentation/DMA-API.txt for details.
+ */
+
+#define dma_sync_single_range_for_cpu(dev, dma_handle, offset, size, dir)	\
+	dma_sync_single_for_cpu(dev, dma_handle, size, dir)
+#define dma_sync_single_range_for_device(dev, dma_handle, offset, size, dir)	\
+	dma_sync_single_for_device(dev, dma_handle, size, dir)
+
+#define dma_supported		platform_dma_supported
+
+static inline int
+dma_set_mask (struct device *dev, u64 mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+	*dev->dma_mask = mask;
+	return 0;
+}
+
+extern int dma_get_cache_alignment(void);
+
+static inline void
+dma_cache_sync (struct device *dev, void *vaddr, size_t size,
+	enum dma_data_direction dir)
+{
+	/*
+	 * IA-64 is cache-coherent, so this is mostly a no-op.  However, we do need to
+	 * ensure that dma_cache_sync() enforces order, hence the mb().
+	 */
+	mb();
+}
+
+#define dma_is_consistent(d, h)	(1)	/* all we do is coherent memory... */
+
+#endif /* _ASM_IA64_DMA_MAPPING_H */
diff --git a/arch/ia64/include/asm/dma.h b/arch/ia64/include/asm/dma.h
new file mode 100644
index 000000000000..4d97f60f1ef5
--- /dev/null
+++ b/arch/ia64/include/asm/dma.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_IA64_DMA_H
+#define _ASM_IA64_DMA_H
+
+/*
+ * Copyright (C) 1998-2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+
+#include <asm/io.h>		/* need byte IO */
+
+extern unsigned long MAX_DMA_ADDRESS;
+
+#ifdef CONFIG_PCI
+  extern int isa_dma_bridge_buggy;
+#else
+# define isa_dma_bridge_buggy 	(0)
+#endif
+
+#define free_dma(x)
+
+void dma_mark_clean(void *addr, size_t size);
+
+#endif /* _ASM_IA64_DMA_H */
diff --git a/arch/ia64/include/asm/dmi.h b/arch/ia64/include/asm/dmi.h
new file mode 100644
index 000000000000..00eb1b130b63
--- /dev/null
+++ b/arch/ia64/include/asm/dmi.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_DMI_H
+#define _ASM_DMI_H 1
+
+#include <asm/io.h>
+
+/* Use normal IO mappings for DMI */
+#define dmi_ioremap ioremap
+#define dmi_iounmap(x,l) iounmap(x)
+#define dmi_alloc(l) kmalloc(l, GFP_ATOMIC)
+
+#endif
diff --git a/arch/ia64/include/asm/elf.h b/arch/ia64/include/asm/elf.h
new file mode 100644
index 000000000000..5e0c1a6bce8d
--- /dev/null
+++ b/arch/ia64/include/asm/elf.h
@@ -0,0 +1,269 @@
+#ifndef _ASM_IA64_ELF_H
+#define _ASM_IA64_ELF_H
+
+/*
+ * ELF-specific definitions.
+ *
+ * Copyright (C) 1998-1999, 2002-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+
+#include <asm/fpu.h>
+#include <asm/page.h>
+#include <asm/auxvec.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_IA_64)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS64
+#define ELF_DATA	ELFDATA2LSB
+#define ELF_ARCH	EM_IA_64
+
+#define USE_ELF_CORE_DUMP
+#define CORE_DUMP_USE_REGSET
+
+/* Least-significant four bits of ELF header's e_flags are OS-specific.  The bits are
+   interpreted as follows by Linux: */
+#define EF_IA_64_LINUX_EXECUTABLE_STACK	0x1	/* is stack (& heap) executable by default? */
+
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/*
+ * This is the location that an ET_DYN program is loaded if exec'ed.
+ * Typical use of this is to invoke "./ld.so someprog" to test out a
+ * new version of the loader.  We need to make sure that it is out of
+ * the way of the program that it will "exec", and that there is
+ * sufficient room for the brk.
+ */
+#define ELF_ET_DYN_BASE		(TASK_UNMAPPED_BASE + 0x800000000UL)
+
+#define PT_IA_64_UNWIND		0x70000001
+
+/* IA-64 relocations: */
+#define R_IA64_NONE		0x00	/* none */
+#define R_IA64_IMM14		0x21	/* symbol + addend, add imm14 */
+#define R_IA64_IMM22		0x22	/* symbol + addend, add imm22 */
+#define R_IA64_IMM64		0x23	/* symbol + addend, mov imm64 */
+#define R_IA64_DIR32MSB		0x24	/* symbol + addend, data4 MSB */
+#define R_IA64_DIR32LSB		0x25	/* symbol + addend, data4 LSB */
+#define R_IA64_DIR64MSB		0x26	/* symbol + addend, data8 MSB */
+#define R_IA64_DIR64LSB		0x27	/* symbol + addend, data8 LSB */
+#define R_IA64_GPREL22		0x2a	/* @gprel(sym+add), add imm22 */
+#define R_IA64_GPREL64I		0x2b	/* @gprel(sym+add), mov imm64 */
+#define R_IA64_GPREL32MSB	0x2c	/* @gprel(sym+add), data4 MSB */
+#define R_IA64_GPREL32LSB	0x2d	/* @gprel(sym+add), data4 LSB */
+#define R_IA64_GPREL64MSB	0x2e	/* @gprel(sym+add), data8 MSB */
+#define R_IA64_GPREL64LSB	0x2f	/* @gprel(sym+add), data8 LSB */
+#define R_IA64_LTOFF22		0x32	/* @ltoff(sym+add), add imm22 */
+#define R_IA64_LTOFF64I		0x33	/* @ltoff(sym+add), mov imm64 */
+#define R_IA64_PLTOFF22		0x3a	/* @pltoff(sym+add), add imm22 */
+#define R_IA64_PLTOFF64I	0x3b	/* @pltoff(sym+add), mov imm64 */
+#define R_IA64_PLTOFF64MSB	0x3e	/* @pltoff(sym+add), data8 MSB */
+#define R_IA64_PLTOFF64LSB	0x3f	/* @pltoff(sym+add), data8 LSB */
+#define R_IA64_FPTR64I		0x43	/* @fptr(sym+add), mov imm64 */
+#define R_IA64_FPTR32MSB	0x44	/* @fptr(sym+add), data4 MSB */
+#define R_IA64_FPTR32LSB	0x45	/* @fptr(sym+add), data4 LSB */
+#define R_IA64_FPTR64MSB	0x46	/* @fptr(sym+add), data8 MSB */
+#define R_IA64_FPTR64LSB	0x47	/* @fptr(sym+add), data8 LSB */
+#define R_IA64_PCREL60B		0x48	/* @pcrel(sym+add), brl */
+#define R_IA64_PCREL21B		0x49	/* @pcrel(sym+add), ptb, call */
+#define R_IA64_PCREL21M		0x4a	/* @pcrel(sym+add), chk.s */
+#define R_IA64_PCREL21F		0x4b	/* @pcrel(sym+add), fchkf */
+#define R_IA64_PCREL32MSB	0x4c	/* @pcrel(sym+add), data4 MSB */
+#define R_IA64_PCREL32LSB	0x4d	/* @pcrel(sym+add), data4 LSB */
+#define R_IA64_PCREL64MSB	0x4e	/* @pcrel(sym+add), data8 MSB */
+#define R_IA64_PCREL64LSB	0x4f	/* @pcrel(sym+add), data8 LSB */
+#define R_IA64_LTOFF_FPTR22	0x52	/* @ltoff(@fptr(s+a)), imm22 */
+#define R_IA64_LTOFF_FPTR64I	0x53	/* @ltoff(@fptr(s+a)), imm64 */
+#define R_IA64_LTOFF_FPTR32MSB	0x54	/* @ltoff(@fptr(s+a)), 4 MSB */
+#define R_IA64_LTOFF_FPTR32LSB	0x55	/* @ltoff(@fptr(s+a)), 4 LSB */
+#define R_IA64_LTOFF_FPTR64MSB	0x56	/* @ltoff(@fptr(s+a)), 8 MSB */
+#define R_IA64_LTOFF_FPTR64LSB	0x57	/* @ltoff(@fptr(s+a)), 8 LSB */
+#define R_IA64_SEGREL32MSB	0x5c	/* @segrel(sym+add), data4 MSB */
+#define R_IA64_SEGREL32LSB	0x5d	/* @segrel(sym+add), data4 LSB */
+#define R_IA64_SEGREL64MSB	0x5e	/* @segrel(sym+add), data8 MSB */
+#define R_IA64_SEGREL64LSB	0x5f	/* @segrel(sym+add), data8 LSB */
+#define R_IA64_SECREL32MSB	0x64	/* @secrel(sym+add), data4 MSB */
+#define R_IA64_SECREL32LSB	0x65	/* @secrel(sym+add), data4 LSB */
+#define R_IA64_SECREL64MSB	0x66	/* @secrel(sym+add), data8 MSB */
+#define R_IA64_SECREL64LSB	0x67	/* @secrel(sym+add), data8 LSB */
+#define R_IA64_REL32MSB		0x6c	/* data 4 + REL */
+#define R_IA64_REL32LSB		0x6d	/* data 4 + REL */
+#define R_IA64_REL64MSB		0x6e	/* data 8 + REL */
+#define R_IA64_REL64LSB		0x6f	/* data 8 + REL */
+#define R_IA64_LTV32MSB		0x74	/* symbol + addend, data4 MSB */
+#define R_IA64_LTV32LSB		0x75	/* symbol + addend, data4 LSB */
+#define R_IA64_LTV64MSB		0x76	/* symbol + addend, data8 MSB */
+#define R_IA64_LTV64LSB		0x77	/* symbol + addend, data8 LSB */
+#define R_IA64_PCREL21BI	0x79	/* @pcrel(sym+add), ptb, call */
+#define R_IA64_PCREL22		0x7a	/* @pcrel(sym+add), imm22 */
+#define R_IA64_PCREL64I		0x7b	/* @pcrel(sym+add), imm64 */
+#define R_IA64_IPLTMSB		0x80	/* dynamic reloc, imported PLT, MSB */
+#define R_IA64_IPLTLSB		0x81	/* dynamic reloc, imported PLT, LSB */
+#define R_IA64_COPY		0x84	/* dynamic reloc, data copy */
+#define R_IA64_SUB		0x85	/* -symbol + addend, add imm22 */
+#define R_IA64_LTOFF22X		0x86	/* LTOFF22, relaxable.  */
+#define R_IA64_LDXMOV		0x87	/* Use of LTOFF22X.  */
+#define R_IA64_TPREL14		0x91	/* @tprel(sym+add), add imm14 */
+#define R_IA64_TPREL22		0x92	/* @tprel(sym+add), add imm22 */
+#define R_IA64_TPREL64I		0x93	/* @tprel(sym+add), add imm64 */
+#define R_IA64_TPREL64MSB	0x96	/* @tprel(sym+add), data8 MSB */
+#define R_IA64_TPREL64LSB	0x97	/* @tprel(sym+add), data8 LSB */
+#define R_IA64_LTOFF_TPREL22	0x9a	/* @ltoff(@tprel(s+a)), add imm22 */
+#define R_IA64_DTPMOD64MSB	0xa6	/* @dtpmod(sym+add), data8 MSB */
+#define R_IA64_DTPMOD64LSB	0xa7	/* @dtpmod(sym+add), data8 LSB */
+#define R_IA64_LTOFF_DTPMOD22	0xaa	/* @ltoff(@dtpmod(s+a)), imm22 */
+#define R_IA64_DTPREL14		0xb1	/* @dtprel(sym+add), imm14 */
+#define R_IA64_DTPREL22		0xb2	/* @dtprel(sym+add), imm22 */
+#define R_IA64_DTPREL64I	0xb3	/* @dtprel(sym+add), imm64 */
+#define R_IA64_DTPREL32MSB	0xb4	/* @dtprel(sym+add), data4 MSB */
+#define R_IA64_DTPREL32LSB	0xb5	/* @dtprel(sym+add), data4 LSB */
+#define R_IA64_DTPREL64MSB	0xb6	/* @dtprel(sym+add), data8 MSB */
+#define R_IA64_DTPREL64LSB	0xb7	/* @dtprel(sym+add), data8 LSB */
+#define R_IA64_LTOFF_DTPREL22	0xba	/* @ltoff(@dtprel(s+a)), imm22 */
+
+/* IA-64 specific section flags: */
+#define SHF_IA_64_SHORT		0x10000000	/* section near gp */
+
+/*
+ * We use (abuse?) this macro to insert the (empty) vm_area that is
+ * used to map the register backing store.  I don't see any better
+ * place to do this, but we should discuss this with Linus once we can
+ * talk to him...
+ */
+extern void ia64_init_addr_space (void);
+#define ELF_PLAT_INIT(_r, load_addr)	ia64_init_addr_space()
+
+/* ELF register definitions.  This is needed for core dump support.  */
+
+/*
+ * elf_gregset_t contains the application-level state in the following order:
+ *	r0-r31
+ *	NaT bits (for r0-r31; bit N == 1 iff rN is a NaT)
+ *	predicate registers (p0-p63)
+ *	b0-b7
+ *	ip cfm psr
+ *	ar.rsc ar.bsp ar.bspstore ar.rnat
+ *	ar.ccv ar.unat ar.fpsr ar.pfs ar.lc ar.ec ar.csd ar.ssd
+ */
+#define ELF_NGREG	128	/* we really need just 72 but let's leave some headroom... */
+#define ELF_NFPREG	128	/* f0 and f1 could be omitted, but so what... */
+
+/* elf_gregset_t register offsets */
+#define ELF_GR_0_OFFSET     0
+#define ELF_NAT_OFFSET     (32 * sizeof(elf_greg_t))
+#define ELF_PR_OFFSET      (33 * sizeof(elf_greg_t))
+#define ELF_BR_0_OFFSET    (34 * sizeof(elf_greg_t))
+#define ELF_CR_IIP_OFFSET  (42 * sizeof(elf_greg_t))
+#define ELF_CFM_OFFSET     (43 * sizeof(elf_greg_t))
+#define ELF_CR_IPSR_OFFSET (44 * sizeof(elf_greg_t))
+#define ELF_GR_OFFSET(i)   (ELF_GR_0_OFFSET + i * sizeof(elf_greg_t))
+#define ELF_BR_OFFSET(i)   (ELF_BR_0_OFFSET + i * sizeof(elf_greg_t))
+#define ELF_AR_RSC_OFFSET  (45 * sizeof(elf_greg_t))
+#define ELF_AR_BSP_OFFSET  (46 * sizeof(elf_greg_t))
+#define ELF_AR_BSPSTORE_OFFSET (47 * sizeof(elf_greg_t))
+#define ELF_AR_RNAT_OFFSET (48 * sizeof(elf_greg_t))
+#define ELF_AR_CCV_OFFSET  (49 * sizeof(elf_greg_t))
+#define ELF_AR_UNAT_OFFSET (50 * sizeof(elf_greg_t))
+#define ELF_AR_FPSR_OFFSET (51 * sizeof(elf_greg_t))
+#define ELF_AR_PFS_OFFSET  (52 * sizeof(elf_greg_t))
+#define ELF_AR_LC_OFFSET   (53 * sizeof(elf_greg_t))
+#define ELF_AR_EC_OFFSET   (54 * sizeof(elf_greg_t))
+#define ELF_AR_CSD_OFFSET  (55 * sizeof(elf_greg_t))
+#define ELF_AR_SSD_OFFSET  (56 * sizeof(elf_greg_t))
+#define ELF_AR_END_OFFSET  (57 * sizeof(elf_greg_t))
+
+typedef unsigned long elf_fpxregset_t;
+
+typedef unsigned long elf_greg_t;
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct ia64_fpreg elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+
+
+struct pt_regs;	/* forward declaration... */
+extern void ia64_elf_core_copy_regs (struct pt_regs *src, elf_gregset_t dst);
+#define ELF_CORE_COPY_REGS(_dest,_regs)	ia64_elf_core_copy_regs(_regs, _dest);
+
+/* This macro yields a bitmask that programs can use to figure out
+   what instruction set this CPU supports.  */
+#define ELF_HWCAP 	0
+
+/* This macro yields a string that ld.so will use to load
+   implementation specific libraries for optimization.  Not terribly
+   relevant until we have real hardware to play with... */
+#define ELF_PLATFORM	NULL
+
+#define SET_PERSONALITY(ex, ibcs2)	set_personality(PER_LINUX)
+#define elf_read_implies_exec(ex, executable_stack)					\
+	((executable_stack!=EXSTACK_DISABLE_X) && ((ex).e_flags & EF_IA_64_LINUX_EXECUTABLE_STACK) != 0)
+
+struct task_struct;
+
+#define GATE_EHDR	((const struct elfhdr *) GATE_ADDR)
+
+/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
+#define ARCH_DLINFO								\
+do {										\
+	extern char __kernel_syscall_via_epc[];					\
+	NEW_AUX_ENT(AT_SYSINFO, (unsigned long) __kernel_syscall_via_epc);	\
+	NEW_AUX_ENT(AT_SYSINFO_EHDR, (unsigned long) GATE_EHDR);		\
+} while (0)
+
+
+/*
+ * These macros parameterize elf_core_dump in fs/binfmt_elf.c to write out
+ * extra segments containing the gate DSO contents.  Dumping its
+ * contents makes post-mortem fully interpretable later without matching up
+ * the same kernel and hardware config to see what PC values meant.
+ * Dumping its extra ELF program headers includes all the other information
+ * a debugger needs to easily find how the gate DSO was being used.
+ */
+#define ELF_CORE_EXTRA_PHDRS		(GATE_EHDR->e_phnum)
+#define ELF_CORE_WRITE_EXTRA_PHDRS						\
+do {										\
+	const struct elf_phdr *const gate_phdrs =			      \
+		(const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff);   \
+	int i;									\
+	Elf64_Off ofs = 0;						      \
+	for (i = 0; i < GATE_EHDR->e_phnum; ++i) {				\
+		struct elf_phdr phdr = gate_phdrs[i];			      \
+		if (phdr.p_type == PT_LOAD) {					\
+			phdr.p_memsz = PAGE_ALIGN(phdr.p_memsz);	      \
+			phdr.p_filesz = phdr.p_memsz;			      \
+			if (ofs == 0) {					      \
+				ofs = phdr.p_offset = offset;		      \
+			offset += phdr.p_filesz;				\
+		}							      \
+		else							      \
+				phdr.p_offset = ofs;			      \
+		}							      \
+		else							      \
+			phdr.p_offset += ofs;					\
+		phdr.p_paddr = 0; /* match other core phdrs */			\
+		DUMP_WRITE(&phdr, sizeof(phdr));				\
+	}									\
+} while (0)
+#define ELF_CORE_WRITE_EXTRA_DATA					\
+do {									\
+	const struct elf_phdr *const gate_phdrs =			      \
+		(const struct elf_phdr *) (GATE_ADDR + GATE_EHDR->e_phoff);   \
+	int i;								\
+	for (i = 0; i < GATE_EHDR->e_phnum; ++i) {			\
+		if (gate_phdrs[i].p_type == PT_LOAD) {			      \
+			DUMP_WRITE((void *) gate_phdrs[i].p_vaddr,	      \
+				   PAGE_ALIGN(gate_phdrs[i].p_memsz));	      \
+			break;						      \
+		}							      \
+	}								\
+} while (0)
+
+#endif /* _ASM_IA64_ELF_H */
diff --git a/arch/ia64/include/asm/emergency-restart.h b/arch/ia64/include/asm/emergency-restart.h
new file mode 100644
index 000000000000..108d8c48e42e
--- /dev/null
+++ b/arch/ia64/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/ia64/include/asm/errno.h b/arch/ia64/include/asm/errno.h
new file mode 100644
index 000000000000..4c82b503d92f
--- /dev/null
+++ b/arch/ia64/include/asm/errno.h
@@ -0,0 +1 @@
+#include <asm-generic/errno.h>
diff --git a/arch/ia64/include/asm/esi.h b/arch/ia64/include/asm/esi.h
new file mode 100644
index 000000000000..40991c6ba647
--- /dev/null
+++ b/arch/ia64/include/asm/esi.h
@@ -0,0 +1,29 @@
+/*
+ * ESI service calls.
+ *
+ * Copyright (c) Copyright 2005-2006 Hewlett-Packard Development Company, L.P.
+ * 	Alex Williamson <alex.williamson@hp.com>
+ */
+#ifndef esi_h
+#define esi_h
+
+#include <linux/efi.h>
+
+#define ESI_QUERY			0x00000001
+#define ESI_OPEN_HANDLE			0x02000000
+#define ESI_CLOSE_HANDLE		0x02000001
+
+enum esi_proc_type {
+	ESI_PROC_SERIALIZED,	/* calls need to be serialized */
+	ESI_PROC_MP_SAFE,	/* MP-safe, but not reentrant */
+	ESI_PROC_REENTRANT	/* MP-safe and reentrant */
+};
+
+extern struct ia64_sal_retval esi_call_phys (void *, u64 *);
+extern int ia64_esi_call(efi_guid_t, struct ia64_sal_retval *,
+			 enum esi_proc_type,
+			 u64, u64, u64, u64, u64, u64, u64, u64);
+extern int ia64_esi_call_phys(efi_guid_t, struct ia64_sal_retval *, u64, u64,
+                              u64, u64, u64, u64, u64, u64);
+
+#endif /* esi_h */
diff --git a/arch/ia64/include/asm/fb.h b/arch/ia64/include/asm/fb.h
new file mode 100644
index 000000000000..89a397cee90a
--- /dev/null
+++ b/arch/ia64/include/asm/fb.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <linux/efi.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	if (efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start))
+		vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+	else
+		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/ia64/include/asm/fcntl.h b/arch/ia64/include/asm/fcntl.h
new file mode 100644
index 000000000000..1dd275dc8f65
--- /dev/null
+++ b/arch/ia64/include/asm/fcntl.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_IA64_FCNTL_H
+#define _ASM_IA64_FCNTL_H
+/*
+ * Modified 1998-2000
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co.
+ */
+
+#define force_o_largefile()	\
+		(personality(current->personality) != PER_LINUX32)
+
+#include <asm-generic/fcntl.h>
+
+#endif /* _ASM_IA64_FCNTL_H */
diff --git a/arch/ia64/include/asm/fpswa.h b/arch/ia64/include/asm/fpswa.h
new file mode 100644
index 000000000000..62edfceadaa6
--- /dev/null
+++ b/arch/ia64/include/asm/fpswa.h
@@ -0,0 +1,73 @@
+#ifndef _ASM_IA64_FPSWA_H
+#define _ASM_IA64_FPSWA_H
+
+/*
+ * Floating-point Software Assist
+ *
+ * Copyright (C) 1999 Intel Corporation.
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Goutham Rao <goutham.rao@intel.com>
+ */
+
+typedef struct {
+	/* 4 * 128 bits */
+	unsigned long fp_lp[4*2];
+} fp_state_low_preserved_t;
+
+typedef struct {
+	/* 10 * 128 bits */
+	unsigned long fp_lv[10 * 2];
+} fp_state_low_volatile_t;
+
+typedef	struct {
+	/* 16 * 128 bits */
+	unsigned long fp_hp[16 * 2];
+} fp_state_high_preserved_t;
+
+typedef struct {
+	/* 96 * 128 bits */
+	unsigned long fp_hv[96 * 2];
+} fp_state_high_volatile_t;
+
+/**
+ * floating point state to be passed to the FP emulation library by
+ * the trap/fault handler
+ */
+typedef struct {
+	unsigned long			bitmask_low64;
+	unsigned long			bitmask_high64;
+	fp_state_low_preserved_t	*fp_state_low_preserved;
+	fp_state_low_volatile_t		*fp_state_low_volatile;
+	fp_state_high_preserved_t	*fp_state_high_preserved;
+	fp_state_high_volatile_t	*fp_state_high_volatile;
+} fp_state_t;
+
+typedef struct {
+	unsigned long status;
+	unsigned long err0;
+	unsigned long err1;
+	unsigned long err2;
+} fpswa_ret_t;
+
+/**
+ * function header for the Floating Point software assist
+ * library. This function is invoked by the Floating point software
+ * assist trap/fault handler.
+ */
+typedef fpswa_ret_t (*efi_fpswa_t) (unsigned long trap_type, void *bundle, unsigned long *ipsr,
+				    unsigned long *fsr, unsigned long *isr, unsigned long *preds,
+				    unsigned long *ifs, fp_state_t *fp_state);
+
+/**
+ * This is the FPSWA library interface as defined by EFI.  We need to pass a 
+ * pointer to the interface itself on a call to the assist library
+ */
+typedef struct {
+	unsigned int	 revision;
+	unsigned int	 reserved;
+	efi_fpswa_t	 fpswa;
+} fpswa_interface_t;
+
+extern fpswa_interface_t *fpswa_interface;
+
+#endif /* _ASM_IA64_FPSWA_H */
diff --git a/arch/ia64/include/asm/fpu.h b/arch/ia64/include/asm/fpu.h
new file mode 100644
index 000000000000..3859558ff0a4
--- /dev/null
+++ b/arch/ia64/include/asm/fpu.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_IA64_FPU_H
+#define _ASM_IA64_FPU_H
+
+/*
+ * Copyright (C) 1998, 1999, 2002, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/types.h>
+
+/* floating point status register: */
+#define FPSR_TRAP_VD	(1 << 0)	/* invalid op trap disabled */
+#define FPSR_TRAP_DD	(1 << 1)	/* denormal trap disabled */
+#define FPSR_TRAP_ZD	(1 << 2)	/* zero-divide trap disabled */
+#define FPSR_TRAP_OD	(1 << 3)	/* overflow trap disabled */
+#define FPSR_TRAP_UD	(1 << 4)	/* underflow trap disabled */
+#define FPSR_TRAP_ID	(1 << 5)	/* inexact trap disabled */
+#define FPSR_S0(x)	((x) <<  6)
+#define FPSR_S1(x)	((x) << 19)
+#define FPSR_S2(x)	(__IA64_UL(x) << 32)
+#define FPSR_S3(x)	(__IA64_UL(x) << 45)
+
+/* floating-point status field controls: */
+#define FPSF_FTZ	(1 << 0)		/* flush-to-zero */
+#define FPSF_WRE	(1 << 1)		/* widest-range exponent */
+#define FPSF_PC(x)	(((x) & 0x3) << 2)	/* precision control */
+#define FPSF_RC(x)	(((x) & 0x3) << 4)	/* rounding control */
+#define FPSF_TD		(1 << 6)		/* trap disabled */
+
+/* floating-point status field flags: */
+#define FPSF_V		(1 <<  7)		/* invalid operation flag */
+#define FPSF_D		(1 <<  8)		/* denormal/unnormal operand flag */
+#define FPSF_Z		(1 <<  9)		/* zero divide (IEEE) flag */
+#define FPSF_O		(1 << 10)		/* overflow (IEEE) flag */
+#define FPSF_U		(1 << 11)		/* underflow (IEEE) flag */
+#define FPSF_I		(1 << 12)		/* inexact (IEEE) flag) */
+
+/* floating-point rounding control: */
+#define FPRC_NEAREST	0x0
+#define FPRC_NEGINF	0x1
+#define FPRC_POSINF	0x2
+#define FPRC_TRUNC	0x3
+
+#define FPSF_DEFAULT	(FPSF_PC (0x3) | FPSF_RC (FPRC_NEAREST))
+
+/* This default value is the same as HP-UX uses.  Don't change it
+   without a very good reason.  */
+#define FPSR_DEFAULT	(FPSR_TRAP_VD | FPSR_TRAP_DD | FPSR_TRAP_ZD	\
+			 | FPSR_TRAP_OD | FPSR_TRAP_UD | FPSR_TRAP_ID	\
+			 | FPSR_S0 (FPSF_DEFAULT)			\
+			 | FPSR_S1 (FPSF_DEFAULT | FPSF_TD | FPSF_WRE)	\
+			 | FPSR_S2 (FPSF_DEFAULT | FPSF_TD)		\
+			 | FPSR_S3 (FPSF_DEFAULT | FPSF_TD))
+
+# ifndef __ASSEMBLY__
+
+struct ia64_fpreg {
+	union {
+		unsigned long bits[2];
+		long double __dummy;	/* force 16-byte alignment */
+	} u;
+};
+
+# endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_FPU_H */
diff --git a/arch/ia64/include/asm/futex.h b/arch/ia64/include/asm/futex.h
new file mode 100644
index 000000000000..c7f0f062239c
--- /dev/null
+++ b/arch/ia64/include/asm/futex.h
@@ -0,0 +1,124 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+#include <asm/system.h>
+
+#define __futex_atomic_op1(insn, ret, oldval, uaddr, oparg) \
+do {									\
+	register unsigned long r8 __asm ("r8") = 0;			\
+	__asm__ __volatile__(						\
+		"	mf;;					\n"	\
+		"[1:] "	insn ";;				\n"	\
+		"	.xdata4 \"__ex_table\", 1b-., 2f-.	\n"	\
+		"[2:]"							\
+		: "+r" (r8), "=r" (oldval)				\
+		: "r" (uaddr), "r" (oparg)				\
+		: "memory");						\
+	ret = r8;							\
+} while (0)
+
+#define __futex_atomic_op2(insn, ret, oldval, uaddr, oparg) \
+do {									\
+	register unsigned long r8 __asm ("r8") = 0;			\
+	int val, newval;						\
+	do {								\
+		__asm__ __volatile__(					\
+			"	mf;;				  \n"	\
+			"[1:]	ld4 %3=[%4];;			  \n"	\
+			"	mov %2=%3			  \n"	\
+				insn	";;			  \n"	\
+			"	mov ar.ccv=%2;;			  \n"	\
+			"[2:]	cmpxchg4.acq %1=[%4],%3,ar.ccv;;  \n"	\
+			"	.xdata4 \"__ex_table\", 1b-., 3f-.\n"	\
+			"	.xdata4 \"__ex_table\", 2b-., 3f-.\n"	\
+			"[3:]"						\
+			: "+r" (r8), "=r" (val), "=&r" (oldval),	\
+			   "=&r" (newval)				\
+			: "r" (uaddr), "r" (oparg)			\
+			: "memory");					\
+		if (unlikely (r8))					\
+			break;						\
+	} while (unlikely (val != oldval));				\
+	ret = r8;							\
+} while (0)
+
+static inline int
+futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op1("xchg4 %1=[%2],%3", ret, oldval, uaddr,
+				   oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op2("add %3=%3,%5", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op2("or %3=%3,%5", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op2("and %3=%3,%5", ret, oldval, uaddr,
+				   ~oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op2("xor %3=%3,%5", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	{
+		register unsigned long r8 __asm ("r8");
+		__asm__ __volatile__(
+			"	mf;;					\n"
+			"	mov ar.ccv=%3;;				\n"
+			"[1:]	cmpxchg4.acq %0=[%1],%2,ar.ccv		\n"
+			"	.xdata4 \"__ex_table\", 1b-., 2f-.	\n"
+			"[2:]"
+			: "=r" (r8)
+			: "r" (uaddr), "r" (newval),
+			  "rO" ((long) (unsigned) oldval)
+			: "memory");
+		return r8;
+	}
+}
+
+#endif /* _ASM_FUTEX_H */
diff --git a/arch/ia64/include/asm/gcc_intrin.h b/arch/ia64/include/asm/gcc_intrin.h
new file mode 100644
index 000000000000..0f5b55921758
--- /dev/null
+++ b/arch/ia64/include/asm/gcc_intrin.h
@@ -0,0 +1,620 @@
+#ifndef _ASM_IA64_GCC_INTRIN_H
+#define _ASM_IA64_GCC_INTRIN_H
+/*
+ *
+ * Copyright (C) 2002,2003 Jun Nakajima <jun.nakajima@intel.com>
+ * Copyright (C) 2002,2003 Suresh Siddha <suresh.b.siddha@intel.com>
+ */
+
+#include <linux/compiler.h>
+
+/* define this macro to get some asm stmts included in 'c' files */
+#define ASM_SUPPORTED
+
+/* Optimization barrier */
+/* The "volatile" is due to gcc bugs */
+#define ia64_barrier()	asm volatile ("":::"memory")
+
+#define ia64_stop()	asm volatile (";;"::)
+
+#define ia64_invala_gr(regnum)	asm volatile ("invala.e r%0" :: "i"(regnum))
+
+#define ia64_invala_fr(regnum)	asm volatile ("invala.e f%0" :: "i"(regnum))
+
+#define ia64_flushrs() asm volatile ("flushrs;;":::"memory")
+
+#define ia64_loadrs() asm volatile ("loadrs;;":::"memory")
+
+extern void ia64_bad_param_for_setreg (void);
+extern void ia64_bad_param_for_getreg (void);
+
+#ifdef __KERNEL__
+register unsigned long ia64_r13 asm ("r13") __used;
+#endif
+
+#define ia64_native_setreg(regnum, val)						\
+({										\
+	switch (regnum) {							\
+	    case _IA64_REG_PSR_L:						\
+		    asm volatile ("mov psr.l=%0" :: "r"(val) : "memory");	\
+		    break;							\
+	    case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC:				\
+		    asm volatile ("mov ar%0=%1" ::				\
+		    			  "i" (regnum - _IA64_REG_AR_KR0),	\
+					  "r"(val): "memory");			\
+		    break;							\
+	    case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1:			\
+		    asm volatile ("mov cr%0=%1" ::				\
+				          "i" (regnum - _IA64_REG_CR_DCR),	\
+					  "r"(val): "memory" );			\
+		    break;							\
+	    case _IA64_REG_SP:							\
+		    asm volatile ("mov r12=%0" ::				\
+			    		  "r"(val): "memory");			\
+		    break;							\
+	    case _IA64_REG_GP:							\
+		    asm volatile ("mov gp=%0" :: "r"(val) : "memory");		\
+		break;								\
+	    default:								\
+		    ia64_bad_param_for_setreg();				\
+		    break;							\
+	}									\
+})
+
+#define ia64_native_getreg(regnum)						\
+({										\
+	__u64 ia64_intri_res;							\
+										\
+	switch (regnum) {							\
+	case _IA64_REG_GP:							\
+		asm volatile ("mov %0=gp" : "=r"(ia64_intri_res));		\
+		break;								\
+	case _IA64_REG_IP:							\
+		asm volatile ("mov %0=ip" : "=r"(ia64_intri_res));		\
+		break;								\
+	case _IA64_REG_PSR:							\
+		asm volatile ("mov %0=psr" : "=r"(ia64_intri_res));		\
+		break;								\
+	case _IA64_REG_TP:	/* for current() */				\
+		ia64_intri_res = ia64_r13;					\
+		break;								\
+	case _IA64_REG_AR_KR0 ... _IA64_REG_AR_EC:				\
+		asm volatile ("mov %0=ar%1" : "=r" (ia64_intri_res)		\
+				      : "i"(regnum - _IA64_REG_AR_KR0));	\
+		break;								\
+	case _IA64_REG_CR_DCR ... _IA64_REG_CR_LRR1:				\
+		asm volatile ("mov %0=cr%1" : "=r" (ia64_intri_res)		\
+				      : "i" (regnum - _IA64_REG_CR_DCR));	\
+		break;								\
+	case _IA64_REG_SP:							\
+		asm volatile ("mov %0=sp" : "=r" (ia64_intri_res));		\
+		break;								\
+	default:								\
+		ia64_bad_param_for_getreg();					\
+		break;								\
+	}									\
+	ia64_intri_res;								\
+})
+
+#define ia64_hint_pause 0
+
+#define ia64_hint(mode)						\
+({								\
+	switch (mode) {						\
+	case ia64_hint_pause:					\
+		asm volatile ("hint @pause" ::: "memory");	\
+		break;						\
+	}							\
+})
+
+
+/* Integer values for mux1 instruction */
+#define ia64_mux1_brcst 0
+#define ia64_mux1_mix   8
+#define ia64_mux1_shuf  9
+#define ia64_mux1_alt  10
+#define ia64_mux1_rev  11
+
+#define ia64_mux1(x, mode)							\
+({										\
+	__u64 ia64_intri_res;							\
+										\
+	switch (mode) {								\
+	case ia64_mux1_brcst:							\
+		asm ("mux1 %0=%1,@brcst" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_mix:							\
+		asm ("mux1 %0=%1,@mix" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_shuf:							\
+		asm ("mux1 %0=%1,@shuf" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_alt:							\
+		asm ("mux1 %0=%1,@alt" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	case ia64_mux1_rev:							\
+		asm ("mux1 %0=%1,@rev" : "=r" (ia64_intri_res) : "r" (x));	\
+		break;								\
+	}									\
+	ia64_intri_res;								\
+})
+
+#if __GNUC__ >= 4 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)
+# define ia64_popcnt(x)		__builtin_popcountl(x)
+#else
+# define ia64_popcnt(x)						\
+  ({								\
+	__u64 ia64_intri_res;					\
+	asm ("popcnt %0=%1" : "=r" (ia64_intri_res) : "r" (x));	\
+								\
+	ia64_intri_res;						\
+  })
+#endif
+
+#define ia64_getf_exp(x)					\
+({								\
+	long ia64_intri_res;					\
+								\
+	asm ("getf.exp %0=%1" : "=r"(ia64_intri_res) : "f"(x));	\
+								\
+	ia64_intri_res;						\
+})
+
+#define ia64_shrp(a, b, count)								\
+({											\
+	__u64 ia64_intri_res;								\
+	asm ("shrp %0=%1,%2,%3" : "=r"(ia64_intri_res) : "r"(a), "r"(b), "i"(count));	\
+	ia64_intri_res;									\
+})
+
+#define ia64_ldfs(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldfs %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldfd(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldfd %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldfe(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldfe %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldf8(regnum, x)					\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldf8 %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_ldf_fill(regnum, x)				\
+({								\
+	register double __f__ asm ("f"#regnum);			\
+	asm volatile ("ldf.fill %0=[%1]" :"=f"(__f__): "r"(x));	\
+})
+
+#define ia64_st4_rel_nta(m, val)					\
+({									\
+	asm volatile ("st4.rel.nta [%0] = %1\n\t" :: "r"(m), "r"(val));	\
+})
+
+#define ia64_stfs(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stfs [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stfd(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stfd [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stfe(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stfe [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stf8(x, regnum)						\
+({									\
+	register double __f__ asm ("f"#regnum);				\
+	asm volatile ("stf8 [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_stf_spill(x, regnum)						\
+({										\
+	register double __f__ asm ("f"#regnum);					\
+	asm volatile ("stf.spill [%0]=%1" :: "r"(x), "f"(__f__) : "memory");	\
+})
+
+#define ia64_fetchadd4_acq(p, inc)						\
+({										\
+										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd4.acq %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_fetchadd4_rel(p, inc)						\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd4.rel %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_fetchadd8_acq(p, inc)						\
+({										\
+										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd8.acq %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_fetchadd8_rel(p, inc)						\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("fetchadd8.rel %0=[%1],%2"				\
+				: "=r"(ia64_intri_res) : "r"(p), "i" (inc)	\
+				: "memory");					\
+										\
+	ia64_intri_res;								\
+})
+
+#define ia64_xchg1(ptr,x)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("xchg1 %0=[%1],%2"					\
+		      : "=r" (ia64_intri_res) : "r" (ptr), "r" (x) : "memory");	\
+	ia64_intri_res;								\
+})
+
+#define ia64_xchg2(ptr,x)						\
+({									\
+	__u64 ia64_intri_res;						\
+	asm volatile ("xchg2 %0=[%1],%2" : "=r" (ia64_intri_res)	\
+		      : "r" (ptr), "r" (x) : "memory");			\
+	ia64_intri_res;							\
+})
+
+#define ia64_xchg4(ptr,x)						\
+({									\
+	__u64 ia64_intri_res;						\
+	asm volatile ("xchg4 %0=[%1],%2" : "=r" (ia64_intri_res)	\
+		      : "r" (ptr), "r" (x) : "memory");			\
+	ia64_intri_res;							\
+})
+
+#define ia64_xchg8(ptr,x)						\
+({									\
+	__u64 ia64_intri_res;						\
+	asm volatile ("xchg8 %0=[%1],%2" : "=r" (ia64_intri_res)	\
+		      : "r" (ptr), "r" (x) : "memory");			\
+	ia64_intri_res;							\
+})
+
+#define ia64_cmpxchg1_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg1.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg1_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg1.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg2_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg2.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg2_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+											\
+	asm volatile ("cmpxchg2.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg4_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg4.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg4_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg4.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg8_acq(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+	asm volatile ("cmpxchg8.acq %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_cmpxchg8_rel(ptr, new, old)						\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov ar.ccv=%0;;" :: "rO"(old));					\
+											\
+	asm volatile ("cmpxchg8.rel %0=[%1],%2,ar.ccv":					\
+			      "=r"(ia64_intri_res) : "r"(ptr), "r"(new) : "memory");	\
+	ia64_intri_res;									\
+})
+
+#define ia64_mf()	asm volatile ("mf" ::: "memory")
+#define ia64_mfa()	asm volatile ("mf.a" ::: "memory")
+
+#define ia64_invala() asm volatile ("invala" ::: "memory")
+
+#define ia64_native_thash(addr)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("thash %0=%1" : "=r"(ia64_intri_res) : "r" (addr));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_srlz_i()	asm volatile (";; srlz.i ;;" ::: "memory")
+#define ia64_srlz_d()	asm volatile (";; srlz.d" ::: "memory");
+
+#ifdef HAVE_SERIALIZE_DIRECTIVE
+# define ia64_dv_serialize_data()		asm volatile (".serialize.data");
+# define ia64_dv_serialize_instruction()	asm volatile (".serialize.instruction");
+#else
+# define ia64_dv_serialize_data()
+# define ia64_dv_serialize_instruction()
+#endif
+
+#define ia64_nop(x)	asm volatile ("nop %0"::"i"(x));
+
+#define ia64_itci(addr)	asm volatile ("itc.i %0;;" :: "r"(addr) : "memory")
+
+#define ia64_itcd(addr)	asm volatile ("itc.d %0;;" :: "r"(addr) : "memory")
+
+
+#define ia64_itri(trnum, addr) asm volatile ("itr.i itr[%0]=%1"				\
+					     :: "r"(trnum), "r"(addr) : "memory")
+
+#define ia64_itrd(trnum, addr) asm volatile ("itr.d dtr[%0]=%1"				\
+					     :: "r"(trnum), "r"(addr) : "memory")
+
+#define ia64_tpa(addr)								\
+({										\
+	__u64 ia64_pa;								\
+	asm volatile ("tpa %0 = %1" : "=r"(ia64_pa) : "r"(addr) : "memory");	\
+	ia64_pa;								\
+})
+
+#define __ia64_set_dbr(index, val)						\
+	asm volatile ("mov dbr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_ibr(index, val)						\
+	asm volatile ("mov ibr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pkr(index, val)						\
+	asm volatile ("mov pkr[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pmc(index, val)						\
+	asm volatile ("mov pmc[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_set_pmd(index, val)						\
+	asm volatile ("mov pmd[%0]=%1" :: "r"(index), "r"(val) : "memory")
+
+#define ia64_native_set_rr(index, val)							\
+	asm volatile ("mov rr[%0]=%1" :: "r"(index), "r"(val) : "memory");
+
+#define ia64_native_get_cpuid(index)							\
+({											\
+	__u64 ia64_intri_res;								\
+	asm volatile ("mov %0=cpuid[%r1]" : "=r"(ia64_intri_res) : "rO"(index));	\
+	ia64_intri_res;									\
+})
+
+#define __ia64_get_dbr(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=dbr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_get_ibr(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=ibr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_get_pkr(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=pkr[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_get_pmc(index)							\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=pmc[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+
+#define ia64_native_get_pmd(index)						\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=pmd[%1]" : "=r"(ia64_intri_res) : "r"(index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_native_get_rr(index)						\
+({										\
+	__u64 ia64_intri_res;							\
+	asm volatile ("mov %0=rr[%1]" : "=r"(ia64_intri_res) : "r" (index));	\
+	ia64_intri_res;								\
+})
+
+#define ia64_native_fc(addr)	asm volatile ("fc %0" :: "r"(addr) : "memory")
+
+
+#define ia64_sync_i()	asm volatile (";; sync.i" ::: "memory")
+
+#define ia64_native_ssm(mask)	asm volatile ("ssm %0":: "i"((mask)) : "memory")
+#define ia64_native_rsm(mask)	asm volatile ("rsm %0":: "i"((mask)) : "memory")
+#define ia64_sum(mask)	asm volatile ("sum %0":: "i"((mask)) : "memory")
+#define ia64_rum(mask)	asm volatile ("rum %0":: "i"((mask)) : "memory")
+
+#define ia64_ptce(addr)	asm volatile ("ptc.e %0" :: "r"(addr))
+
+#define ia64_native_ptcga(addr, size)						\
+do {										\
+	asm volatile ("ptc.ga %0,%1" :: "r"(addr), "r"(size) : "memory");	\
+	ia64_dv_serialize_data();						\
+} while (0)
+
+#define ia64_ptcl(addr, size)							\
+do {										\
+	asm volatile ("ptc.l %0,%1" :: "r"(addr), "r"(size) : "memory");	\
+	ia64_dv_serialize_data();						\
+} while (0)
+
+#define ia64_ptri(addr, size)						\
+	asm volatile ("ptr.i %0,%1" :: "r"(addr), "r"(size) : "memory")
+
+#define ia64_ptrd(addr, size)						\
+	asm volatile ("ptr.d %0,%1" :: "r"(addr), "r"(size) : "memory")
+
+#define ia64_ttag(addr)							\
+({									  \
+	__u64 ia64_intri_res;						   \
+	asm volatile ("ttag %0=%1" : "=r"(ia64_intri_res) : "r" (addr));   \
+	ia64_intri_res;							 \
+})
+
+
+/* Values for lfhint in ia64_lfetch and ia64_lfetch_fault */
+
+#define ia64_lfhint_none   0
+#define ia64_lfhint_nt1    1
+#define ia64_lfhint_nt2    2
+#define ia64_lfhint_nta    3
+
+#define ia64_lfetch(lfhint, y)					\
+({								\
+        switch (lfhint) {					\
+        case ia64_lfhint_none:					\
+                asm volatile ("lfetch [%0]" : : "r"(y));	\
+                break;						\
+        case ia64_lfhint_nt1:					\
+                asm volatile ("lfetch.nt1 [%0]" : : "r"(y));	\
+                break;						\
+        case ia64_lfhint_nt2:					\
+                asm volatile ("lfetch.nt2 [%0]" : : "r"(y));	\
+                break;						\
+        case ia64_lfhint_nta:					\
+                asm volatile ("lfetch.nta [%0]" : : "r"(y));	\
+                break;						\
+        }							\
+})
+
+#define ia64_lfetch_excl(lfhint, y)					\
+({									\
+        switch (lfhint) {						\
+        case ia64_lfhint_none:						\
+                asm volatile ("lfetch.excl [%0]" :: "r"(y));		\
+                break;							\
+        case ia64_lfhint_nt1:						\
+                asm volatile ("lfetch.excl.nt1 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt2:						\
+                asm volatile ("lfetch.excl.nt2 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nta:						\
+                asm volatile ("lfetch.excl.nta [%0]" :: "r"(y));	\
+                break;							\
+        }								\
+})
+
+#define ia64_lfetch_fault(lfhint, y)					\
+({									\
+        switch (lfhint) {						\
+        case ia64_lfhint_none:						\
+                asm volatile ("lfetch.fault [%0]" : : "r"(y));		\
+                break;							\
+        case ia64_lfhint_nt1:						\
+                asm volatile ("lfetch.fault.nt1 [%0]" : : "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt2:						\
+                asm volatile ("lfetch.fault.nt2 [%0]" : : "r"(y));	\
+                break;							\
+        case ia64_lfhint_nta:						\
+                asm volatile ("lfetch.fault.nta [%0]" : : "r"(y));	\
+                break;							\
+        }								\
+})
+
+#define ia64_lfetch_fault_excl(lfhint, y)				\
+({									\
+        switch (lfhint) {						\
+        case ia64_lfhint_none:						\
+                asm volatile ("lfetch.fault.excl [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt1:						\
+                asm volatile ("lfetch.fault.excl.nt1 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nt2:						\
+                asm volatile ("lfetch.fault.excl.nt2 [%0]" :: "r"(y));	\
+                break;							\
+        case ia64_lfhint_nta:						\
+                asm volatile ("lfetch.fault.excl.nta [%0]" :: "r"(y));	\
+                break;							\
+        }								\
+})
+
+#define ia64_native_intrin_local_irq_restore(x)			\
+do {								\
+	asm volatile (";;   cmp.ne p6,p7=%0,r0;;"		\
+		      "(p6) ssm psr.i;"				\
+		      "(p7) rsm psr.i;;"			\
+		      "(p6) srlz.d"				\
+		      :: "r"((x)) : "p6", "p7", "memory");	\
+} while (0)
+
+#endif /* _ASM_IA64_GCC_INTRIN_H */
diff --git a/arch/ia64/include/asm/hardirq.h b/arch/ia64/include/asm/hardirq.h
new file mode 100644
index 000000000000..140e495b8e0e
--- /dev/null
+++ b/arch/ia64/include/asm/hardirq.h
@@ -0,0 +1,37 @@
+#ifndef _ASM_IA64_HARDIRQ_H
+#define _ASM_IA64_HARDIRQ_H
+
+/*
+ * Modified 1998-2002, 2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+#include <asm/processor.h>
+
+/*
+ * No irq_cpustat_t for IA-64.  The data is held in the per-CPU data structure.
+ */
+
+#define __ARCH_IRQ_STAT	1
+
+#define local_softirq_pending()		(local_cpu_data->softirq_pending)
+
+#define HARDIRQ_BITS	14
+
+/*
+ * The hardirq mask has to be large enough to have space for potentially all IRQ sources
+ * in the system nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+extern void __iomem *ipi_base_addr;
+
+void ack_bad_irq(unsigned int irq);
+
+#endif /* _ASM_IA64_HARDIRQ_H */
diff --git a/arch/ia64/include/asm/hpsim.h b/arch/ia64/include/asm/hpsim.h
new file mode 100644
index 000000000000..892ab198a9da
--- /dev/null
+++ b/arch/ia64/include/asm/hpsim.h
@@ -0,0 +1,16 @@
+#ifndef _ASMIA64_HPSIM_H
+#define _ASMIA64_HPSIM_H
+
+#ifndef CONFIG_HP_SIMSERIAL_CONSOLE
+static inline int simcons_register(void) { return 1; }
+#else
+int simcons_register(void);
+#endif
+
+struct tty_driver;
+extern struct tty_driver *hp_simserial_driver;
+
+void ia64_ssc_connect_irq(long intr, long irq);
+void ia64_ctl_trace(long on);
+
+#endif
diff --git a/arch/ia64/include/asm/hugetlb.h b/arch/ia64/include/asm/hugetlb.h
new file mode 100644
index 000000000000..da55c63728e0
--- /dev/null
+++ b/arch/ia64/include/asm/hugetlb.h
@@ -0,0 +1,80 @@
+#ifndef _ASM_IA64_HUGETLB_H
+#define _ASM_IA64_HUGETLB_H
+
+#include <asm/page.h>
+
+
+void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
+			    unsigned long end, unsigned long floor,
+			    unsigned long ceiling);
+
+int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len);
+
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+					 unsigned long addr,
+					 unsigned long len)
+{
+	return (REGION_NUMBER(addr) == RGN_HPAGE ||
+		REGION_NUMBER((addr)+(len)-1) == RGN_HPAGE);
+}
+
+static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm)
+{
+}
+
+static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+				   pte_t *ptep, pte_t pte)
+{
+	set_pte_at(mm, addr, ptep, pte);
+}
+
+static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+					    unsigned long addr, pte_t *ptep)
+{
+	return ptep_get_and_clear(mm, addr, ptep);
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	return pte_wrprotect(pte);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	ptep_set_wrprotect(mm, addr, ptep);
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+					     unsigned long addr, pte_t *ptep,
+					     pte_t pte, int dirty)
+{
+	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	return *ptep;
+}
+
+static inline int arch_prepare_hugepage(struct page *page)
+{
+	return 0;
+}
+
+static inline void arch_release_hugepage(struct page *page)
+{
+}
+
+#endif /* _ASM_IA64_HUGETLB_H */
diff --git a/arch/ia64/include/asm/hw_irq.h b/arch/ia64/include/asm/hw_irq.h
new file mode 100644
index 000000000000..5c99cbcb8a0d
--- /dev/null
+++ b/arch/ia64/include/asm/hw_irq.h
@@ -0,0 +1,192 @@
+#ifndef _ASM_IA64_HW_IRQ_H
+#define _ASM_IA64_HW_IRQ_H
+
+/*
+ * Copyright (C) 2001-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/profile.h>
+
+#include <asm/machvec.h>
+#include <asm/ptrace.h>
+#include <asm/smp.h>
+
+#ifndef CONFIG_PARAVIRT
+typedef u8 ia64_vector;
+#else
+typedef u16 ia64_vector;
+#endif
+
+/*
+ * 0 special
+ *
+ * 1,3-14 are reserved from firmware
+ *
+ * 16-255 (vectored external interrupts) are available
+ *
+ * 15 spurious interrupt (see IVR)
+ *
+ * 16 lowest priority, 255 highest priority
+ *
+ * 15 classes of 16 interrupts each.
+ */
+#define IA64_MIN_VECTORED_IRQ		 16
+#define IA64_MAX_VECTORED_IRQ		255
+#define IA64_NUM_VECTORS		256
+
+#define AUTO_ASSIGN			-1
+
+#define IA64_SPURIOUS_INT_VECTOR	0x0f
+
+/*
+ * Vectors 0x10-0x1f are used for low priority interrupts, e.g. CMCI.
+ */
+#define IA64_CPEP_VECTOR		0x1c	/* corrected platform error polling vector */
+#define IA64_CMCP_VECTOR		0x1d	/* corrected machine-check polling vector */
+#define IA64_CPE_VECTOR			0x1e	/* corrected platform error interrupt vector */
+#define IA64_CMC_VECTOR			0x1f	/* corrected machine-check interrupt vector */
+/*
+ * Vectors 0x20-0x2f are reserved for legacy ISA IRQs.
+ * Use vectors 0x30-0xe7 as the default device vector range for ia64.
+ * Platforms may choose to reduce this range in platform_irq_setup, but the
+ * platform range must fall within
+ *	[IA64_DEF_FIRST_DEVICE_VECTOR..IA64_DEF_LAST_DEVICE_VECTOR]
+ */
+extern int ia64_first_device_vector;
+extern int ia64_last_device_vector;
+
+#define IA64_DEF_FIRST_DEVICE_VECTOR	0x30
+#define IA64_DEF_LAST_DEVICE_VECTOR	0xe7
+#define IA64_FIRST_DEVICE_VECTOR	ia64_first_device_vector
+#define IA64_LAST_DEVICE_VECTOR		ia64_last_device_vector
+#define IA64_MAX_DEVICE_VECTORS		(IA64_DEF_LAST_DEVICE_VECTOR - IA64_DEF_FIRST_DEVICE_VECTOR + 1)
+#define IA64_NUM_DEVICE_VECTORS		(IA64_LAST_DEVICE_VECTOR - IA64_FIRST_DEVICE_VECTOR + 1)
+
+#define IA64_MCA_RENDEZ_VECTOR		0xe8	/* MCA rendez interrupt */
+#define IA64_PERFMON_VECTOR		0xee	/* performance monitor interrupt vector */
+#define IA64_TIMER_VECTOR		0xef	/* use highest-prio group 15 interrupt for timer */
+#define	IA64_MCA_WAKEUP_VECTOR		0xf0	/* MCA wakeup (must be >MCA_RENDEZ_VECTOR) */
+#define IA64_IPI_LOCAL_TLB_FLUSH	0xfc	/* SMP flush local TLB */
+#define IA64_IPI_RESCHEDULE		0xfd	/* SMP reschedule */
+#define IA64_IPI_VECTOR			0xfe	/* inter-processor interrupt vector */
+
+/* Used for encoding redirected irqs */
+
+#define IA64_IRQ_REDIRECTED		(1 << 31)
+
+/* IA64 inter-cpu interrupt related definitions */
+
+#define IA64_IPI_DEFAULT_BASE_ADDR	0xfee00000
+
+/* Delivery modes for inter-cpu interrupts */
+enum {
+        IA64_IPI_DM_INT =       0x0,    /* pend an external interrupt */
+        IA64_IPI_DM_PMI =       0x2,    /* pend a PMI */
+        IA64_IPI_DM_NMI =       0x4,    /* pend an NMI (vector 2) */
+        IA64_IPI_DM_INIT =      0x5,    /* pend an INIT interrupt */
+        IA64_IPI_DM_EXTINT =    0x7,    /* pend an 8259-compatible interrupt. */
+};
+
+extern __u8 isa_irq_to_vector_map[16];
+#define isa_irq_to_vector(x)	isa_irq_to_vector_map[(x)]
+
+struct irq_cfg {
+	ia64_vector vector;
+	cpumask_t domain;
+	cpumask_t old_domain;
+	unsigned move_cleanup_count;
+	u8 move_in_progress : 1;
+};
+extern spinlock_t vector_lock;
+extern struct irq_cfg irq_cfg[NR_IRQS];
+#define irq_to_domain(x)	irq_cfg[(x)].domain
+DECLARE_PER_CPU(int[IA64_NUM_VECTORS], vector_irq);
+
+extern struct hw_interrupt_type irq_type_ia64_lsapic;	/* CPU-internal interrupt controller */
+
+#ifdef CONFIG_PARAVIRT_GUEST
+#include <asm/paravirt.h>
+#else
+#define ia64_register_ipi	ia64_native_register_ipi
+#define assign_irq_vector	ia64_native_assign_irq_vector
+#define free_irq_vector		ia64_native_free_irq_vector
+#define register_percpu_irq	ia64_native_register_percpu_irq
+#define ia64_resend_irq		ia64_native_resend_irq
+#endif
+
+extern void ia64_native_register_ipi(void);
+extern int bind_irq_vector(int irq, int vector, cpumask_t domain);
+extern int ia64_native_assign_irq_vector (int irq);	/* allocate a free vector */
+extern void ia64_native_free_irq_vector (int vector);
+extern int reserve_irq_vector (int vector);
+extern void __setup_vector_irq(int cpu);
+extern void ia64_send_ipi (int cpu, int vector, int delivery_mode, int redirect);
+extern void ia64_native_register_percpu_irq (ia64_vector vec, struct irqaction *action);
+extern int check_irq_used (int irq);
+extern void destroy_and_reserve_irq (unsigned int irq);
+
+#if defined(CONFIG_SMP) && (defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG))
+extern int irq_prepare_move(int irq, int cpu);
+extern void irq_complete_move(unsigned int irq);
+#else
+static inline int irq_prepare_move(int irq, int cpu) { return 0; }
+static inline void irq_complete_move(unsigned int irq) {}
+#endif
+
+static inline void ia64_native_resend_irq(unsigned int vector)
+{
+	platform_send_ipi(smp_processor_id(), vector, IA64_IPI_DM_INT, 0);
+}
+
+/*
+ * Default implementations for the irq-descriptor API:
+ */
+
+extern irq_desc_t irq_desc[NR_IRQS];
+
+#ifndef CONFIG_IA64_GENERIC
+static inline ia64_vector __ia64_irq_to_vector(int irq)
+{
+	return irq_cfg[irq].vector;
+}
+
+static inline unsigned int
+__ia64_local_vector_to_irq (ia64_vector vec)
+{
+	return __get_cpu_var(vector_irq)[vec];
+}
+#endif
+
+/*
+ * Next follows the irq descriptor interface.  On IA-64, each CPU supports 256 interrupt
+ * vectors.  On smaller systems, there is a one-to-one correspondence between interrupt
+ * vectors and the Linux irq numbers.  However, larger systems may have multiple interrupt
+ * domains meaning that the translation from vector number to irq number depends on the
+ * interrupt domain that a CPU belongs to.  This API abstracts such platform-dependent
+ * differences and provides a uniform means to translate between vector and irq numbers
+ * and to obtain the irq descriptor for a given irq number.
+ */
+
+/* Extract the IA-64 vector that corresponds to IRQ.  */
+static inline ia64_vector
+irq_to_vector (int irq)
+{
+	return platform_irq_to_vector(irq);
+}
+
+/*
+ * Convert the local IA-64 vector to the corresponding irq number.  This translation is
+ * done in the context of the interrupt domain that the currently executing CPU belongs
+ * to.
+ */
+static inline unsigned int
+local_vector_to_irq (ia64_vector vec)
+{
+	return platform_local_vector_to_irq(vec);
+}
+
+#endif /* _ASM_IA64_HW_IRQ_H */
diff --git a/arch/ia64/include/asm/ia32.h b/arch/ia64/include/asm/ia32.h
new file mode 100644
index 000000000000..2390ee145aa1
--- /dev/null
+++ b/arch/ia64/include/asm/ia32.h
@@ -0,0 +1,40 @@
+#ifndef _ASM_IA64_IA32_H
+#define _ASM_IA64_IA32_H
+
+
+#include <asm/ptrace.h>
+#include <asm/signal.h>
+
+#define IA32_NR_syscalls		285	/* length of syscall table */
+#define IA32_PAGE_SHIFT			12	/* 4KB pages */
+
+#ifndef __ASSEMBLY__
+
+# ifdef CONFIG_IA32_SUPPORT
+
+#define IA32_PAGE_OFFSET	0xc0000000
+
+extern void ia32_cpu_init (void);
+extern void ia32_mem_init (void);
+extern void ia32_gdt_init (void);
+extern int ia32_exception (struct pt_regs *regs, unsigned long isr);
+extern int ia32_intercept (struct pt_regs *regs, unsigned long isr);
+extern int ia32_clone_tls (struct task_struct *child, struct pt_regs *childregs);
+
+# endif /* !CONFIG_IA32_SUPPORT */
+
+/* Declare this unconditionally, so we don't get warnings for unreachable code.  */
+extern int ia32_setup_frame1 (int sig, struct k_sigaction *ka, siginfo_t *info,
+			      sigset_t *set, struct pt_regs *regs);
+#if PAGE_SHIFT > IA32_PAGE_SHIFT
+extern int ia32_copy_ia64_partial_page_list(struct task_struct *,
+					unsigned long);
+extern void ia32_drop_ia64_partial_page_list(struct task_struct *);
+#else
+# define ia32_copy_ia64_partial_page_list(a1, a2)	0
+# define ia32_drop_ia64_partial_page_list(a1)	do { ; } while (0)
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_IA32_H */
diff --git a/arch/ia64/include/asm/ia64regs.h b/arch/ia64/include/asm/ia64regs.h
new file mode 100644
index 000000000000..1757f1c11ad4
--- /dev/null
+++ b/arch/ia64/include/asm/ia64regs.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright (C) 2002,2003 Intel Corp.
+ *      Jun Nakajima <jun.nakajima@intel.com>
+ *      Suresh Siddha <suresh.b.siddha@intel.com>
+ */
+
+#ifndef _ASM_IA64_IA64REGS_H
+#define _ASM_IA64_IA64REGS_H
+
+/*
+ * Register Names for getreg() and setreg().
+ *
+ * The "magic" numbers happen to match the values used by the Intel compiler's
+ * getreg()/setreg() intrinsics.
+ */
+
+/* Special Registers */
+
+#define _IA64_REG_IP		1016	/* getreg only */
+#define _IA64_REG_PSR		1019
+#define _IA64_REG_PSR_L		1019
+
+/* General Integer Registers */
+
+#define _IA64_REG_GP		1025	/* R1 */
+#define _IA64_REG_R8		1032	/* R8 */
+#define _IA64_REG_R9		1033	/* R9 */
+#define _IA64_REG_SP		1036	/* R12 */
+#define _IA64_REG_TP		1037	/* R13 */
+
+/* Application Registers */
+
+#define _IA64_REG_AR_KR0	3072
+#define _IA64_REG_AR_KR1	3073
+#define _IA64_REG_AR_KR2	3074
+#define _IA64_REG_AR_KR3	3075
+#define _IA64_REG_AR_KR4	3076
+#define _IA64_REG_AR_KR5	3077
+#define _IA64_REG_AR_KR6	3078
+#define _IA64_REG_AR_KR7	3079
+#define _IA64_REG_AR_RSC	3088
+#define _IA64_REG_AR_BSP	3089
+#define _IA64_REG_AR_BSPSTORE	3090
+#define _IA64_REG_AR_RNAT	3091
+#define _IA64_REG_AR_FCR	3093
+#define _IA64_REG_AR_EFLAG	3096
+#define _IA64_REG_AR_CSD	3097
+#define _IA64_REG_AR_SSD	3098
+#define _IA64_REG_AR_CFLAG	3099
+#define _IA64_REG_AR_FSR	3100
+#define _IA64_REG_AR_FIR	3101
+#define _IA64_REG_AR_FDR	3102
+#define _IA64_REG_AR_CCV	3104
+#define _IA64_REG_AR_UNAT	3108
+#define _IA64_REG_AR_FPSR	3112
+#define _IA64_REG_AR_ITC	3116
+#define _IA64_REG_AR_PFS	3136
+#define _IA64_REG_AR_LC		3137
+#define _IA64_REG_AR_EC		3138
+
+/* Control Registers */
+
+#define _IA64_REG_CR_DCR	4096
+#define _IA64_REG_CR_ITM	4097
+#define _IA64_REG_CR_IVA	4098
+#define _IA64_REG_CR_PTA	4104
+#define _IA64_REG_CR_IPSR	4112
+#define _IA64_REG_CR_ISR	4113
+#define _IA64_REG_CR_IIP	4115
+#define _IA64_REG_CR_IFA	4116
+#define _IA64_REG_CR_ITIR	4117
+#define _IA64_REG_CR_IIPA	4118
+#define _IA64_REG_CR_IFS	4119
+#define _IA64_REG_CR_IIM	4120
+#define _IA64_REG_CR_IHA	4121
+#define _IA64_REG_CR_LID	4160
+#define _IA64_REG_CR_IVR	4161	/* getreg only */
+#define _IA64_REG_CR_TPR	4162
+#define _IA64_REG_CR_EOI	4163
+#define _IA64_REG_CR_IRR0	4164	/* getreg only */
+#define _IA64_REG_CR_IRR1	4165	/* getreg only */
+#define _IA64_REG_CR_IRR2	4166	/* getreg only */
+#define _IA64_REG_CR_IRR3	4167	/* getreg only */
+#define _IA64_REG_CR_ITV	4168
+#define _IA64_REG_CR_PMV	4169
+#define _IA64_REG_CR_CMCV	4170
+#define _IA64_REG_CR_LRR0	4176
+#define _IA64_REG_CR_LRR1	4177
+
+/* Indirect Registers for getindreg() and setindreg() */
+
+#define _IA64_REG_INDR_CPUID	9000	/* getindreg only */
+#define _IA64_REG_INDR_DBR	9001
+#define _IA64_REG_INDR_IBR	9002
+#define _IA64_REG_INDR_PKR	9003
+#define _IA64_REG_INDR_PMC	9004
+#define _IA64_REG_INDR_PMD	9005
+#define _IA64_REG_INDR_RR	9006
+
+#endif /* _ASM_IA64_IA64REGS_H */
diff --git a/arch/ia64/include/asm/intel_intrin.h b/arch/ia64/include/asm/intel_intrin.h
new file mode 100644
index 000000000000..53cec577558a
--- /dev/null
+++ b/arch/ia64/include/asm/intel_intrin.h
@@ -0,0 +1,161 @@
+#ifndef _ASM_IA64_INTEL_INTRIN_H
+#define _ASM_IA64_INTEL_INTRIN_H
+/*
+ * Intel Compiler Intrinsics
+ *
+ * Copyright (C) 2002,2003 Jun Nakajima <jun.nakajima@intel.com>
+ * Copyright (C) 2002,2003 Suresh Siddha <suresh.b.siddha@intel.com>
+ * Copyright (C) 2005,2006 Hongjiu Lu <hongjiu.lu@intel.com>
+ *
+ */
+#include <ia64intrin.h>
+
+#define ia64_barrier()		__memory_barrier()
+
+#define ia64_stop()	/* Nothing: As of now stop bit is generated for each
+		 	 * intrinsic
+		 	 */
+
+#define ia64_native_getreg	__getReg
+#define ia64_native_setreg	__setReg
+
+#define ia64_hint		__hint
+#define ia64_hint_pause		__hint_pause
+
+#define ia64_mux1_brcst		_m64_mux1_brcst
+#define ia64_mux1_mix		_m64_mux1_mix
+#define ia64_mux1_shuf		_m64_mux1_shuf
+#define ia64_mux1_alt		_m64_mux1_alt
+#define ia64_mux1_rev		_m64_mux1_rev
+
+#define ia64_mux1(x,v)		_m_to_int64(_m64_mux1(_m_from_int64(x), (v)))
+#define ia64_popcnt		_m64_popcnt
+#define ia64_getf_exp		__getf_exp
+#define ia64_shrp		_m64_shrp
+
+#define ia64_tpa		__tpa
+#define ia64_invala		__invala
+#define ia64_invala_gr		__invala_gr
+#define ia64_invala_fr		__invala_fr
+#define ia64_nop		__nop
+#define ia64_sum		__sum
+#define ia64_native_ssm		__ssm
+#define ia64_rum		__rum
+#define ia64_native_rsm		__rsm
+#define ia64_native_fc 		__fc
+
+#define ia64_ldfs		__ldfs
+#define ia64_ldfd		__ldfd
+#define ia64_ldfe		__ldfe
+#define ia64_ldf8		__ldf8
+#define ia64_ldf_fill		__ldf_fill
+
+#define ia64_stfs		__stfs
+#define ia64_stfd		__stfd
+#define ia64_stfe		__stfe
+#define ia64_stf8		__stf8
+#define ia64_stf_spill		__stf_spill
+
+#define ia64_mf			__mf
+#define ia64_mfa		__mfa
+
+#define ia64_fetchadd4_acq	__fetchadd4_acq
+#define ia64_fetchadd4_rel	__fetchadd4_rel
+#define ia64_fetchadd8_acq	__fetchadd8_acq
+#define ia64_fetchadd8_rel	__fetchadd8_rel
+
+#define ia64_xchg1		_InterlockedExchange8
+#define ia64_xchg2		_InterlockedExchange16
+#define ia64_xchg4		_InterlockedExchange
+#define ia64_xchg8		_InterlockedExchange64
+
+#define ia64_cmpxchg1_rel	_InterlockedCompareExchange8_rel
+#define ia64_cmpxchg1_acq	_InterlockedCompareExchange8_acq
+#define ia64_cmpxchg2_rel	_InterlockedCompareExchange16_rel
+#define ia64_cmpxchg2_acq	_InterlockedCompareExchange16_acq
+#define ia64_cmpxchg4_rel	_InterlockedCompareExchange_rel
+#define ia64_cmpxchg4_acq	_InterlockedCompareExchange_acq
+#define ia64_cmpxchg8_rel	_InterlockedCompareExchange64_rel
+#define ia64_cmpxchg8_acq	_InterlockedCompareExchange64_acq
+
+#define __ia64_set_dbr(index, val)	\
+		__setIndReg(_IA64_REG_INDR_DBR, index, val)
+#define ia64_set_ibr(index, val)	\
+		__setIndReg(_IA64_REG_INDR_IBR, index, val)
+#define ia64_set_pkr(index, val)	\
+		__setIndReg(_IA64_REG_INDR_PKR, index, val)
+#define ia64_set_pmc(index, val)	\
+		__setIndReg(_IA64_REG_INDR_PMC, index, val)
+#define ia64_set_pmd(index, val)	\
+		__setIndReg(_IA64_REG_INDR_PMD, index, val)
+#define ia64_native_set_rr(index, val)	\
+		__setIndReg(_IA64_REG_INDR_RR, index, val)
+
+#define ia64_native_get_cpuid(index)	\
+		__getIndReg(_IA64_REG_INDR_CPUID, index)
+#define __ia64_get_dbr(index)		__getIndReg(_IA64_REG_INDR_DBR, index)
+#define ia64_get_ibr(index)		__getIndReg(_IA64_REG_INDR_IBR, index)
+#define ia64_get_pkr(index)		__getIndReg(_IA64_REG_INDR_PKR, index)
+#define ia64_get_pmc(index)		__getIndReg(_IA64_REG_INDR_PMC, index)
+#define ia64_native_get_pmd(index)	__getIndReg(_IA64_REG_INDR_PMD, index)
+#define ia64_native_get_rr(index)	__getIndReg(_IA64_REG_INDR_RR, index)
+
+#define ia64_srlz_d		__dsrlz
+#define ia64_srlz_i		__isrlz
+
+#define ia64_dv_serialize_data()
+#define ia64_dv_serialize_instruction()
+
+#define ia64_st1_rel		__st1_rel
+#define ia64_st2_rel		__st2_rel
+#define ia64_st4_rel		__st4_rel
+#define ia64_st8_rel		__st8_rel
+
+/* FIXME: need st4.rel.nta intrinsic */
+#define ia64_st4_rel_nta	__st4_rel
+
+#define ia64_ld1_acq		__ld1_acq
+#define ia64_ld2_acq		__ld2_acq
+#define ia64_ld4_acq		__ld4_acq
+#define ia64_ld8_acq		__ld8_acq
+
+#define ia64_sync_i		__synci
+#define ia64_native_thash	__thash
+#define ia64_native_ttag	__ttag
+#define ia64_itcd		__itcd
+#define ia64_itci		__itci
+#define ia64_itrd		__itrd
+#define ia64_itri		__itri
+#define ia64_ptce		__ptce
+#define ia64_ptcl		__ptcl
+#define ia64_native_ptcg	__ptcg
+#define ia64_native_ptcga	__ptcga
+#define ia64_ptri		__ptri
+#define ia64_ptrd		__ptrd
+#define ia64_dep_mi		_m64_dep_mi
+
+/* Values for lfhint in __lfetch and __lfetch_fault */
+
+#define ia64_lfhint_none	__lfhint_none
+#define ia64_lfhint_nt1		__lfhint_nt1
+#define ia64_lfhint_nt2		__lfhint_nt2
+#define ia64_lfhint_nta		__lfhint_nta
+
+#define ia64_lfetch		__lfetch
+#define ia64_lfetch_excl	__lfetch_excl
+#define ia64_lfetch_fault	__lfetch_fault
+#define ia64_lfetch_fault_excl	__lfetch_fault_excl
+
+#define ia64_native_intrin_local_irq_restore(x)		\
+do {							\
+	if ((x) != 0) {					\
+		ia64_native_ssm(IA64_PSR_I);		\
+		ia64_srlz_d();				\
+	} else {					\
+		ia64_native_rsm(IA64_PSR_I);		\
+	}						\
+} while (0)
+
+#define __builtin_trap()	__break(0);
+
+#endif /* _ASM_IA64_INTEL_INTRIN_H */
diff --git a/arch/ia64/include/asm/intrinsics.h b/arch/ia64/include/asm/intrinsics.h
new file mode 100644
index 000000000000..47d686dba1eb
--- /dev/null
+++ b/arch/ia64/include/asm/intrinsics.h
@@ -0,0 +1,241 @@
+#ifndef _ASM_IA64_INTRINSICS_H
+#define _ASM_IA64_INTRINSICS_H
+
+/*
+ * Compiler-dependent intrinsics.
+ *
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#ifndef __ASSEMBLY__
+
+/* include compiler specific intrinsics */
+#include <asm/ia64regs.h>
+#ifdef __INTEL_COMPILER
+# include <asm/intel_intrin.h>
+#else
+# include <asm/gcc_intrin.h>
+#endif
+
+#define ia64_native_get_psr_i()	(ia64_native_getreg(_IA64_REG_PSR) & IA64_PSR_I)
+
+#define ia64_native_set_rr0_to_rr4(val0, val1, val2, val3, val4)	\
+do {									\
+	ia64_native_set_rr(0x0000000000000000UL, (val0));		\
+	ia64_native_set_rr(0x2000000000000000UL, (val1));		\
+	ia64_native_set_rr(0x4000000000000000UL, (val2));		\
+	ia64_native_set_rr(0x6000000000000000UL, (val3));		\
+	ia64_native_set_rr(0x8000000000000000UL, (val4));		\
+} while (0)
+
+/*
+ * Force an unresolved reference if someone tries to use
+ * ia64_fetch_and_add() with a bad value.
+ */
+extern unsigned long __bad_size_for_ia64_fetch_and_add (void);
+extern unsigned long __bad_increment_for_ia64_fetch_and_add (void);
+
+#define IA64_FETCHADD(tmp,v,n,sz,sem)						\
+({										\
+	switch (sz) {								\
+	      case 4:								\
+	        tmp = ia64_fetchadd4_##sem((unsigned int *) v, n);		\
+		break;								\
+										\
+	      case 8:								\
+	        tmp = ia64_fetchadd8_##sem((unsigned long *) v, n);		\
+		break;								\
+										\
+	      default:								\
+		__bad_size_for_ia64_fetch_and_add();				\
+	}									\
+})
+
+#define ia64_fetchadd(i,v,sem)								\
+({											\
+	__u64 _tmp;									\
+	volatile __typeof__(*(v)) *_v = (v);						\
+	/* Can't use a switch () here: gcc isn't always smart enough for that... */	\
+	if ((i) == -16)									\
+		IA64_FETCHADD(_tmp, _v, -16, sizeof(*(v)), sem);			\
+	else if ((i) == -8)								\
+		IA64_FETCHADD(_tmp, _v, -8, sizeof(*(v)), sem);				\
+	else if ((i) == -4)								\
+		IA64_FETCHADD(_tmp, _v, -4, sizeof(*(v)), sem);				\
+	else if ((i) == -1)								\
+		IA64_FETCHADD(_tmp, _v, -1, sizeof(*(v)), sem);				\
+	else if ((i) == 1)								\
+		IA64_FETCHADD(_tmp, _v, 1, sizeof(*(v)), sem);				\
+	else if ((i) == 4)								\
+		IA64_FETCHADD(_tmp, _v, 4, sizeof(*(v)), sem);				\
+	else if ((i) == 8)								\
+		IA64_FETCHADD(_tmp, _v, 8, sizeof(*(v)), sem);				\
+	else if ((i) == 16)								\
+		IA64_FETCHADD(_tmp, _v, 16, sizeof(*(v)), sem);				\
+	else										\
+		_tmp = __bad_increment_for_ia64_fetch_and_add();			\
+	(__typeof__(*(v))) (_tmp);	/* return old value */				\
+})
+
+#define ia64_fetch_and_add(i,v)	(ia64_fetchadd(i, v, rel) + (i)) /* return new value */
+
+/*
+ * This function doesn't exist, so you'll get a linker error if
+ * something tries to do an invalid xchg().
+ */
+extern void ia64_xchg_called_with_bad_pointer (void);
+
+#define __xchg(x,ptr,size)						\
+({									\
+	unsigned long __xchg_result;					\
+									\
+	switch (size) {							\
+	      case 1:							\
+		__xchg_result = ia64_xchg1((__u8 *)ptr, x);		\
+		break;							\
+									\
+	      case 2:							\
+		__xchg_result = ia64_xchg2((__u16 *)ptr, x);		\
+		break;							\
+									\
+	      case 4:							\
+		__xchg_result = ia64_xchg4((__u32 *)ptr, x);		\
+		break;							\
+									\
+	      case 8:							\
+		__xchg_result = ia64_xchg8((__u64 *)ptr, x);		\
+		break;							\
+	      default:							\
+		ia64_xchg_called_with_bad_pointer();			\
+	}								\
+	__xchg_result;							\
+})
+
+#define xchg(ptr,x)							     \
+  ((__typeof__(*(ptr))) __xchg ((unsigned long) (x), (ptr), sizeof(*(ptr))))
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg().
+ */
+extern long ia64_cmpxchg_called_with_bad_pointer (void);
+
+#define ia64_cmpxchg(sem,ptr,old,new,size)						\
+({											\
+	__u64 _o_, _r_;									\
+											\
+	switch (size) {									\
+	      case 1: _o_ = (__u8 ) (long) (old); break;				\
+	      case 2: _o_ = (__u16) (long) (old); break;				\
+	      case 4: _o_ = (__u32) (long) (old); break;				\
+	      case 8: _o_ = (__u64) (long) (old); break;				\
+	      default: break;								\
+	}										\
+	switch (size) {									\
+	      case 1:									\
+	      	_r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_);			\
+		break;									\
+											\
+	      case 2:									\
+	       _r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_);			\
+		break;									\
+											\
+	      case 4:									\
+	      	_r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_);			\
+		break;									\
+											\
+	      case 8:									\
+		_r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_);			\
+		break;									\
+											\
+	      default:									\
+		_r_ = ia64_cmpxchg_called_with_bad_pointer();				\
+		break;									\
+	}										\
+	(__typeof__(old)) _r_;								\
+})
+
+#define cmpxchg_acq(ptr, o, n)	\
+	ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr)))
+#define cmpxchg_rel(ptr, o, n)	\
+	ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr)))
+
+/* for compatibility with other platforms: */
+#define cmpxchg(ptr, o, n)	cmpxchg_acq((ptr), (o), (n))
+#define cmpxchg64(ptr, o, n)	cmpxchg_acq((ptr), (o), (n))
+
+#define cmpxchg_local		cmpxchg
+#define cmpxchg64_local		cmpxchg64
+
+#ifdef CONFIG_IA64_DEBUG_CMPXCHG
+# define CMPXCHG_BUGCHECK_DECL	int _cmpxchg_bugcheck_count = 128;
+# define CMPXCHG_BUGCHECK(v)							\
+  do {										\
+	if (_cmpxchg_bugcheck_count-- <= 0) {					\
+		void *ip;							\
+		extern int printk(const char *fmt, ...);			\
+		ip = (void *) ia64_getreg(_IA64_REG_IP);			\
+		printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v));	\
+		break;								\
+	}									\
+  } while (0)
+#else /* !CONFIG_IA64_DEBUG_CMPXCHG */
+# define CMPXCHG_BUGCHECK_DECL
+# define CMPXCHG_BUGCHECK(v)
+#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */
+
+#endif
+
+#ifdef __KERNEL__
+#include <asm/paravirt_privop.h>
+#endif
+
+#ifndef __ASSEMBLY__
+#if defined(CONFIG_PARAVIRT) && defined(__KERNEL__)
+#define IA64_INTRINSIC_API(name)	pv_cpu_ops.name
+#define IA64_INTRINSIC_MACRO(name)	paravirt_ ## name
+#else
+#define IA64_INTRINSIC_API(name)	ia64_native_ ## name
+#define IA64_INTRINSIC_MACRO(name)	ia64_native_ ## name
+#endif
+
+/************************************************/
+/* Instructions paravirtualized for correctness */
+/************************************************/
+/* fc, thash, get_cpuid, get_pmd, get_eflags, set_eflags */
+/* Note that "ttag" and "cover" are also privilege-sensitive; "ttag"
+ * is not currently used (though it may be in a long-format VHPT system!)
+ */
+#define ia64_fc				IA64_INTRINSIC_API(fc)
+#define ia64_thash			IA64_INTRINSIC_API(thash)
+#define ia64_get_cpuid			IA64_INTRINSIC_API(get_cpuid)
+#define ia64_get_pmd			IA64_INTRINSIC_API(get_pmd)
+
+
+/************************************************/
+/* Instructions paravirtualized for performance */
+/************************************************/
+#define ia64_ssm			IA64_INTRINSIC_MACRO(ssm)
+#define ia64_rsm			IA64_INTRINSIC_MACRO(rsm)
+#define ia64_getreg			IA64_INTRINSIC_API(getreg)
+#define ia64_setreg			IA64_INTRINSIC_API(setreg)
+#define ia64_set_rr			IA64_INTRINSIC_API(set_rr)
+#define ia64_get_rr			IA64_INTRINSIC_API(get_rr)
+#define ia64_ptcga			IA64_INTRINSIC_API(ptcga)
+#define ia64_get_psr_i			IA64_INTRINSIC_API(get_psr_i)
+#define ia64_intrin_local_irq_restore	\
+	IA64_INTRINSIC_API(intrin_local_irq_restore)
+#define ia64_set_rr0_to_rr4		IA64_INTRINSIC_API(set_rr0_to_rr4)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_INTRINSICS_H */
diff --git a/arch/ia64/include/asm/io.h b/arch/ia64/include/asm/io.h
new file mode 100644
index 000000000000..260a85ac9d6a
--- /dev/null
+++ b/arch/ia64/include/asm/io.h
@@ -0,0 +1,459 @@
+#ifndef _ASM_IA64_IO_H
+#define _ASM_IA64_IO_H
+
+/*
+ * This file contains the definitions for the emulated IO instructions
+ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+ * versions of the single-IO instructions (inb_p/inw_p/..).
+ *
+ * This file is not meant to be obfuscating: it's just complicated to
+ * (a) handle it all in a way that makes gcc able to optimize it as
+ * well as possible and (b) trying to avoid writing the same thing
+ * over and over again with slight variations and possibly making a
+ * mistake somewhere.
+ *
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+/* We don't use IO slowdowns on the ia64, but.. */
+#define __SLOW_DOWN_IO	do { } while (0)
+#define SLOW_DOWN_IO	do { } while (0)
+
+#define __IA64_UNCACHED_OFFSET	RGN_BASE(RGN_UNCACHED)
+
+/*
+ * The legacy I/O space defined by the ia64 architecture supports only 65536 ports, but
+ * large machines may have multiple other I/O spaces so we can't place any a priori limit
+ * on IO_SPACE_LIMIT.  These additional spaces are described in ACPI.
+ */
+#define IO_SPACE_LIMIT		0xffffffffffffffffUL
+
+#define MAX_IO_SPACES_BITS		8
+#define MAX_IO_SPACES			(1UL << MAX_IO_SPACES_BITS)
+#define IO_SPACE_BITS			24
+#define IO_SPACE_SIZE			(1UL << IO_SPACE_BITS)
+
+#define IO_SPACE_NR(port)		((port) >> IO_SPACE_BITS)
+#define IO_SPACE_BASE(space)		((space) << IO_SPACE_BITS)
+#define IO_SPACE_PORT(port)		((port) & (IO_SPACE_SIZE - 1))
+
+#define IO_SPACE_SPARSE_ENCODING(p)	((((p) >> 2) << 12) | ((p) & 0xfff))
+
+struct io_space {
+	unsigned long mmio_base;	/* base in MMIO space */
+	int sparse;
+};
+
+extern struct io_space io_space[];
+extern unsigned int num_io_spaces;
+
+# ifdef __KERNEL__
+
+/*
+ * All MMIO iomem cookies are in region 6; anything less is a PIO cookie:
+ *	0xCxxxxxxxxxxxxxxx	MMIO cookie (return from ioremap)
+ *	0x000000001SPPPPPP	PIO cookie (S=space number, P..P=port)
+ *
+ * ioread/writeX() uses the leading 1 in PIO cookies (PIO_OFFSET) to catch
+ * code that uses bare port numbers without the prerequisite pci_iomap().
+ */
+#define PIO_OFFSET		(1UL << (MAX_IO_SPACES_BITS + IO_SPACE_BITS))
+#define PIO_MASK		(PIO_OFFSET - 1)
+#define PIO_RESERVED		__IA64_UNCACHED_OFFSET
+#define HAVE_ARCH_PIO_SIZE
+
+#include <asm/intrinsics.h>
+#include <asm/machvec.h>
+#include <asm/page.h>
+#include <asm/system.h>
+#include <asm-generic/iomap.h>
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ */
+static inline unsigned long
+virt_to_phys (volatile void *address)
+{
+	return (unsigned long) address - PAGE_OFFSET;
+}
+
+static inline void*
+phys_to_virt (unsigned long address)
+{
+	return (void *) (address + PAGE_OFFSET);
+}
+
+#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
+extern u64 kern_mem_attribute (unsigned long phys_addr, unsigned long size);
+extern int valid_phys_addr_range (unsigned long addr, size_t count); /* efi.c */
+extern int valid_mmap_phys_addr_range (unsigned long pfn, size_t count);
+
+/*
+ * The following two macros are deprecated and scheduled for removal.
+ * Please use the PCI-DMA interface defined in <asm/pci.h> instead.
+ */
+#define bus_to_virt	phys_to_virt
+#define virt_to_bus	virt_to_phys
+#define page_to_bus	page_to_phys
+
+# endif /* KERNEL */
+
+/*
+ * Memory fence w/accept.  This should never be used in code that is
+ * not IA-64 specific.
+ */
+#define __ia64_mf_a()	ia64_mfa()
+
+/**
+ * ___ia64_mmiowb - I/O write barrier
+ *
+ * Ensure ordering of I/O space writes.  This will make sure that writes
+ * following the barrier will arrive after all previous writes.  For most
+ * ia64 platforms, this is a simple 'mf.a' instruction.
+ *
+ * See Documentation/DocBook/deviceiobook.tmpl for more information.
+ */
+static inline void ___ia64_mmiowb(void)
+{
+	ia64_mfa();
+}
+
+static inline void*
+__ia64_mk_io_addr (unsigned long port)
+{
+	struct io_space *space;
+	unsigned long offset;
+
+	space = &io_space[IO_SPACE_NR(port)];
+	port = IO_SPACE_PORT(port);
+	if (space->sparse)
+		offset = IO_SPACE_SPARSE_ENCODING(port);
+	else
+		offset = port;
+
+	return (void *) (space->mmio_base | offset);
+}
+
+#define __ia64_inb	___ia64_inb
+#define __ia64_inw	___ia64_inw
+#define __ia64_inl	___ia64_inl
+#define __ia64_outb	___ia64_outb
+#define __ia64_outw	___ia64_outw
+#define __ia64_outl	___ia64_outl
+#define __ia64_readb	___ia64_readb
+#define __ia64_readw	___ia64_readw
+#define __ia64_readl	___ia64_readl
+#define __ia64_readq	___ia64_readq
+#define __ia64_readb_relaxed	___ia64_readb
+#define __ia64_readw_relaxed	___ia64_readw
+#define __ia64_readl_relaxed	___ia64_readl
+#define __ia64_readq_relaxed	___ia64_readq
+#define __ia64_writeb	___ia64_writeb
+#define __ia64_writew	___ia64_writew
+#define __ia64_writel	___ia64_writel
+#define __ia64_writeq	___ia64_writeq
+#define __ia64_mmiowb	___ia64_mmiowb
+
+/*
+ * For the in/out routines, we need to do "mf.a" _after_ doing the I/O access to ensure
+ * that the access has completed before executing other I/O accesses.  Since we're doing
+ * the accesses through an uncachable (UC) translation, the CPU will execute them in
+ * program order.  However, we still need to tell the compiler not to shuffle them around
+ * during optimization, which is why we use "volatile" pointers.
+ */
+
+static inline unsigned int
+___ia64_inb (unsigned long port)
+{
+	volatile unsigned char *addr = __ia64_mk_io_addr(port);
+	unsigned char ret;
+
+	ret = *addr;
+	__ia64_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+___ia64_inw (unsigned long port)
+{
+	volatile unsigned short *addr = __ia64_mk_io_addr(port);
+	unsigned short ret;
+
+	ret = *addr;
+	__ia64_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+___ia64_inl (unsigned long port)
+{
+	volatile unsigned int *addr = __ia64_mk_io_addr(port);
+	unsigned int ret;
+
+	ret = *addr;
+	__ia64_mf_a();
+	return ret;
+}
+
+static inline void
+___ia64_outb (unsigned char val, unsigned long port)
+{
+	volatile unsigned char *addr = __ia64_mk_io_addr(port);
+
+	*addr = val;
+	__ia64_mf_a();
+}
+
+static inline void
+___ia64_outw (unsigned short val, unsigned long port)
+{
+	volatile unsigned short *addr = __ia64_mk_io_addr(port);
+
+	*addr = val;
+	__ia64_mf_a();
+}
+
+static inline void
+___ia64_outl (unsigned int val, unsigned long port)
+{
+	volatile unsigned int *addr = __ia64_mk_io_addr(port);
+
+	*addr = val;
+	__ia64_mf_a();
+}
+
+static inline void
+__insb (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned char *dp = dst;
+
+	while (count--)
+		*dp++ = platform_inb(port);
+}
+
+static inline void
+__insw (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned short *dp = dst;
+
+	while (count--)
+		*dp++ = platform_inw(port);
+}
+
+static inline void
+__insl (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned int *dp = dst;
+
+	while (count--)
+		*dp++ = platform_inl(port);
+}
+
+static inline void
+__outsb (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned char *sp = src;
+
+	while (count--)
+		platform_outb(*sp++, port);
+}
+
+static inline void
+__outsw (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned short *sp = src;
+
+	while (count--)
+		platform_outw(*sp++, port);
+}
+
+static inline void
+__outsl (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned int *sp = src;
+
+	while (count--)
+		platform_outl(*sp++, port);
+}
+
+/*
+ * Unfortunately, some platforms are broken and do not follow the IA-64 architecture
+ * specification regarding legacy I/O support.  Thus, we have to make these operations
+ * platform dependent...
+ */
+#define __inb		platform_inb
+#define __inw		platform_inw
+#define __inl		platform_inl
+#define __outb		platform_outb
+#define __outw		platform_outw
+#define __outl		platform_outl
+#define __mmiowb	platform_mmiowb
+
+#define inb(p)		__inb(p)
+#define inw(p)		__inw(p)
+#define inl(p)		__inl(p)
+#define insb(p,d,c)	__insb(p,d,c)
+#define insw(p,d,c)	__insw(p,d,c)
+#define insl(p,d,c)	__insl(p,d,c)
+#define outb(v,p)	__outb(v,p)
+#define outw(v,p)	__outw(v,p)
+#define outl(v,p)	__outl(v,p)
+#define outsb(p,s,c)	__outsb(p,s,c)
+#define outsw(p,s,c)	__outsw(p,s,c)
+#define outsl(p,s,c)	__outsl(p,s,c)
+#define mmiowb()	__mmiowb()
+
+/*
+ * The address passed to these functions are ioremap()ped already.
+ *
+ * We need these to be machine vectors since some platforms don't provide
+ * DMA coherence via PIO reads (PCI drivers and the spec imply that this is
+ * a good idea).  Writes are ok though for all existing ia64 platforms (and
+ * hopefully it'll stay that way).
+ */
+static inline unsigned char
+___ia64_readb (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned char __force *)addr;
+}
+
+static inline unsigned short
+___ia64_readw (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short __force *)addr;
+}
+
+static inline unsigned int
+___ia64_readl (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int __force *) addr;
+}
+
+static inline unsigned long
+___ia64_readq (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned long __force *) addr;
+}
+
+static inline void
+__writeb (unsigned char val, volatile void __iomem *addr)
+{
+	*(volatile unsigned char __force *) addr = val;
+}
+
+static inline void
+__writew (unsigned short val, volatile void __iomem *addr)
+{
+	*(volatile unsigned short __force *) addr = val;
+}
+
+static inline void
+__writel (unsigned int val, volatile void __iomem *addr)
+{
+	*(volatile unsigned int __force *) addr = val;
+}
+
+static inline void
+__writeq (unsigned long val, volatile void __iomem *addr)
+{
+	*(volatile unsigned long __force *) addr = val;
+}
+
+#define __readb		platform_readb
+#define __readw		platform_readw
+#define __readl		platform_readl
+#define __readq		platform_readq
+#define __readb_relaxed	platform_readb_relaxed
+#define __readw_relaxed	platform_readw_relaxed
+#define __readl_relaxed	platform_readl_relaxed
+#define __readq_relaxed	platform_readq_relaxed
+
+#define readb(a)	__readb((a))
+#define readw(a)	__readw((a))
+#define readl(a)	__readl((a))
+#define readq(a)	__readq((a))
+#define readb_relaxed(a)	__readb_relaxed((a))
+#define readw_relaxed(a)	__readw_relaxed((a))
+#define readl_relaxed(a)	__readl_relaxed((a))
+#define readq_relaxed(a)	__readq_relaxed((a))
+#define __raw_readb	readb
+#define __raw_readw	readw
+#define __raw_readl	readl
+#define __raw_readq	readq
+#define __raw_readb_relaxed	readb_relaxed
+#define __raw_readw_relaxed	readw_relaxed
+#define __raw_readl_relaxed	readl_relaxed
+#define __raw_readq_relaxed	readq_relaxed
+#define writeb(v,a)	__writeb((v), (a))
+#define writew(v,a)	__writew((v), (a))
+#define writel(v,a)	__writel((v), (a))
+#define writeq(v,a)	__writeq((v), (a))
+#define __raw_writeb	writeb
+#define __raw_writew	writew
+#define __raw_writel	writel
+#define __raw_writeq	writeq
+
+#ifndef inb_p
+# define inb_p		inb
+#endif
+#ifndef inw_p
+# define inw_p		inw
+#endif
+#ifndef inl_p
+# define inl_p		inl
+#endif
+
+#ifndef outb_p
+# define outb_p		outb
+#endif
+#ifndef outw_p
+# define outw_p		outw
+#endif
+#ifndef outl_p
+# define outl_p		outl
+#endif
+
+# ifdef __KERNEL__
+
+extern void __iomem * ioremap(unsigned long offset, unsigned long size);
+extern void __iomem * ioremap_nocache (unsigned long offset, unsigned long size);
+extern void iounmap (volatile void __iomem *addr);
+
+/*
+ * String version of IO memory access ops:
+ */
+extern void memcpy_fromio(void *dst, const volatile void __iomem *src, long n);
+extern void memcpy_toio(volatile void __iomem *dst, const void *src, long n);
+extern void memset_io(volatile void __iomem *s, int c, long n);
+
+# endif /* __KERNEL__ */
+
+/*
+ * Enabling BIO_VMERGE_BOUNDARY forces us to turn off I/O MMU bypassing.  It is said that
+ * BIO-level virtual merging can give up to 4% performance boost (not verified for ia64).
+ * On the other hand, we know that I/O MMU bypassing gives ~8% performance improvement on
+ * SPECweb-like workloads on zx1-based machines.  Thus, for now we favor I/O MMU bypassing
+ * over BIO-level virtual merging.
+ */
+extern unsigned long ia64_max_iommu_merge_mask;
+#if 1
+#define BIO_VMERGE_BOUNDARY	0
+#else
+/*
+ * It makes no sense at all to have this BIO_VMERGE_BOUNDARY macro here.  Should be
+ * replaced by dma_merge_mask() or something of that sort.  Note: the only way
+ * BIO_VMERGE_BOUNDARY is used is to mask off bits.  Effectively, our definition gets
+ * expanded into:
+ *
+ *	addr & ((ia64_max_iommu_merge_mask + 1) - 1) == (addr & ia64_max_iommu_vmerge_mask)
+ *
+ * which is precisely what we want.
+ */
+#define BIO_VMERGE_BOUNDARY	(ia64_max_iommu_merge_mask + 1)
+#endif
+
+#endif /* _ASM_IA64_IO_H */
diff --git a/arch/ia64/include/asm/ioctl.h b/arch/ia64/include/asm/ioctl.h
new file mode 100644
index 000000000000..b279fe06dfe5
--- /dev/null
+++ b/arch/ia64/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/ia64/include/asm/ioctls.h b/arch/ia64/include/asm/ioctls.h
new file mode 100644
index 000000000000..f41b636a0bf6
--- /dev/null
+++ b/arch/ia64/include/asm/ioctls.h
@@ -0,0 +1,93 @@
+#ifndef _ASM_IA64_IOCTLS_H
+#define _ASM_IA64_IOCTLS_H
+
+/*
+ * Based on <asm-i386/ioctls.h>
+ *
+ * Modified 1998, 1999, 2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402	/* Clashes with SNDCTL_TMR_START sound ioctl */
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T',0x2A, struct termios2)
+#define TCSETS2		_IOW('T',0x2B, struct termios2)
+#define TCSETSW2	_IOW('T',0x2C, struct termios2)
+#define TCSETSF2	_IOW('T',0x2D, struct termios2)
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define TIOCGHAYESESP   0x545E  /* Get Hayes ESP configuration */
+#define TIOCSHAYESESP   0x545F  /* Set Hayes ESP configuration */
+#define FIOQSIZE	0x5460
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* _ASM_IA64_IOCTLS_H */
diff --git a/arch/ia64/include/asm/iosapic.h b/arch/ia64/include/asm/iosapic.h
new file mode 100644
index 000000000000..b9c102e15f22
--- /dev/null
+++ b/arch/ia64/include/asm/iosapic.h
@@ -0,0 +1,126 @@
+#ifndef __ASM_IA64_IOSAPIC_H
+#define __ASM_IA64_IOSAPIC_H
+
+#define	IOSAPIC_REG_SELECT	0x0
+#define	IOSAPIC_WINDOW		0x10
+#define	IOSAPIC_EOI		0x40
+
+#define	IOSAPIC_VERSION		0x1
+
+/*
+ * Redirection table entry
+ */
+#define	IOSAPIC_RTE_LOW(i)	(0x10+i*2)
+#define	IOSAPIC_RTE_HIGH(i)	(0x11+i*2)
+
+#define	IOSAPIC_DEST_SHIFT		16
+
+/*
+ * Delivery mode
+ */
+#define	IOSAPIC_DELIVERY_SHIFT		8
+#define	IOSAPIC_FIXED			0x0
+#define	IOSAPIC_LOWEST_PRIORITY	0x1
+#define	IOSAPIC_PMI			0x2
+#define	IOSAPIC_NMI			0x4
+#define	IOSAPIC_INIT			0x5
+#define	IOSAPIC_EXTINT			0x7
+
+/*
+ * Interrupt polarity
+ */
+#define	IOSAPIC_POLARITY_SHIFT		13
+#define	IOSAPIC_POL_HIGH		0
+#define	IOSAPIC_POL_LOW		1
+
+/*
+ * Trigger mode
+ */
+#define	IOSAPIC_TRIGGER_SHIFT		15
+#define	IOSAPIC_EDGE			0
+#define	IOSAPIC_LEVEL			1
+
+/*
+ * Mask bit
+ */
+
+#define	IOSAPIC_MASK_SHIFT		16
+#define	IOSAPIC_MASK			(1<<IOSAPIC_MASK_SHIFT)
+
+#define IOSAPIC_VECTOR_MASK		0xffffff00
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_IOSAPIC
+
+#define NR_IOSAPICS			256
+
+#ifdef CONFIG_PARAVIRT_GUEST
+#include <asm/paravirt.h>
+#else
+#define iosapic_pcat_compat_init	ia64_native_iosapic_pcat_compat_init
+#define __iosapic_read			__ia64_native_iosapic_read
+#define __iosapic_write			__ia64_native_iosapic_write
+#define iosapic_get_irq_chip		ia64_native_iosapic_get_irq_chip
+#endif
+
+extern void __init ia64_native_iosapic_pcat_compat_init(void);
+extern struct irq_chip *ia64_native_iosapic_get_irq_chip(unsigned long trigger);
+
+static inline unsigned int
+__ia64_native_iosapic_read(char __iomem *iosapic, unsigned int reg)
+{
+	writel(reg, iosapic + IOSAPIC_REG_SELECT);
+	return readl(iosapic + IOSAPIC_WINDOW);
+}
+
+static inline void
+__ia64_native_iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
+{
+	writel(reg, iosapic + IOSAPIC_REG_SELECT);
+	writel(val, iosapic + IOSAPIC_WINDOW);
+}
+
+static inline void iosapic_eoi(char __iomem *iosapic, u32 vector)
+{
+	writel(vector, iosapic + IOSAPIC_EOI);
+}
+
+extern void __init iosapic_system_init (int pcat_compat);
+extern int __devinit iosapic_init (unsigned long address,
+				    unsigned int gsi_base);
+#ifdef CONFIG_HOTPLUG
+extern int iosapic_remove (unsigned int gsi_base);
+#else
+#define iosapic_remove(gsi_base)				(-EINVAL)
+#endif /* CONFIG_HOTPLUG */
+extern int gsi_to_irq (unsigned int gsi);
+extern int iosapic_register_intr (unsigned int gsi, unsigned long polarity,
+				  unsigned long trigger);
+extern void iosapic_unregister_intr (unsigned int irq);
+extern void __devinit iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi,
+				      unsigned long polarity,
+				      unsigned long trigger);
+extern int __init iosapic_register_platform_intr (u32 int_type,
+					   unsigned int gsi,
+					   int pmi_vector,
+					   u16 eid, u16 id,
+					   unsigned long polarity,
+					   unsigned long trigger);
+
+#ifdef CONFIG_NUMA
+extern void __devinit map_iosapic_to_node (unsigned int, int);
+#endif
+#else
+#define iosapic_system_init(pcat_compat)			do { } while (0)
+#define iosapic_init(address,gsi_base)				(-EINVAL)
+#define iosapic_remove(gsi_base)				(-ENODEV)
+#define iosapic_register_intr(gsi,polarity,trigger)		(gsi)
+#define iosapic_unregister_intr(irq)				do { } while (0)
+#define iosapic_override_isa_irq(isa_irq,gsi,polarity,trigger)	do { } while (0)
+#define iosapic_register_platform_intr(type,gsi,pmi,eid,id, \
+	polarity,trigger)					(gsi)
+#endif
+
+# endif /* !__ASSEMBLY__ */
+#endif /* __ASM_IA64_IOSAPIC_H */
diff --git a/arch/ia64/include/asm/ipcbuf.h b/arch/ia64/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..079899ae7d32
--- /dev/null
+++ b/arch/ia64/include/asm/ipcbuf.h
@@ -0,0 +1,28 @@
+#ifndef _ASM_IA64_IPCBUF_H
+#define _ASM_IA64_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode;
+	unsigned short	seq;
+	unsigned short	__pad1;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ASM_IA64_IPCBUF_H */
diff --git a/arch/ia64/include/asm/irq.h b/arch/ia64/include/asm/irq.h
new file mode 100644
index 000000000000..3627116fb0e2
--- /dev/null
+++ b/arch/ia64/include/asm/irq.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_IA64_IRQ_H
+#define _ASM_IA64_IRQ_H
+
+/*
+ * Copyright (C) 1999-2000, 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ *
+ * 11/24/98	S.Eranian 	updated TIMER_IRQ and irq_canonicalize
+ * 01/20/99	S.Eranian	added keyboard interrupt
+ * 02/29/00     D.Mosberger	moved most things into hw_irq.h
+ */
+
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include <asm-ia64/nr-irqs.h>
+
+static __inline__ int
+irq_canonicalize (int irq)
+{
+	/*
+	 * We do the legacy thing here of pretending that irqs < 16
+	 * are 8259 irqs.  This really shouldn't be necessary at all,
+	 * but we keep it here as serial.c still uses it...
+	 */
+	return ((irq == 2) ? 9 : irq);
+}
+
+extern void set_irq_affinity_info (unsigned int irq, int dest, int redir);
+bool is_affinity_mask_valid(cpumask_t cpumask);
+
+#define is_affinity_mask_valid is_affinity_mask_valid
+
+#endif /* _ASM_IA64_IRQ_H */
diff --git a/arch/ia64/include/asm/irq_regs.h b/arch/ia64/include/asm/irq_regs.h
new file mode 100644
index 000000000000..3dd9c0b70270
--- /dev/null
+++ b/arch/ia64/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/ia64/include/asm/kdebug.h b/arch/ia64/include/asm/kdebug.h
new file mode 100644
index 000000000000..d11a69855036
--- /dev/null
+++ b/arch/ia64/include/asm/kdebug.h
@@ -0,0 +1,57 @@
+#ifndef _IA64_KDEBUG_H
+#define _IA64_KDEBUG_H 1
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) Intel Corporation, 2005
+ *
+ * 2005-Apr     Rusty Lynch <rusty.lynch@intel.com> and Anil S Keshavamurthy
+ *              <anil.s.keshavamurthy@intel.com> adopted from
+ *              include/asm-x86_64/kdebug.h
+ *
+ * 2005-Oct	Keith Owens <kaos@sgi.com>.  Expand notify_die to cover more
+ *		events.
+ */
+
+enum die_val {
+	DIE_BREAK = 1,
+	DIE_FAULT,
+	DIE_OOPS,
+	DIE_MACHINE_HALT,
+	DIE_MACHINE_RESTART,
+	DIE_MCA_MONARCH_ENTER,
+	DIE_MCA_MONARCH_PROCESS,
+	DIE_MCA_MONARCH_LEAVE,
+	DIE_MCA_SLAVE_ENTER,
+	DIE_MCA_SLAVE_PROCESS,
+	DIE_MCA_SLAVE_LEAVE,
+	DIE_MCA_RENDZVOUS_ENTER,
+	DIE_MCA_RENDZVOUS_PROCESS,
+	DIE_MCA_RENDZVOUS_LEAVE,
+	DIE_MCA_NEW_TIMEOUT,
+	DIE_INIT_ENTER,
+	DIE_INIT_MONARCH_ENTER,
+	DIE_INIT_MONARCH_PROCESS,
+	DIE_INIT_MONARCH_LEAVE,
+	DIE_INIT_SLAVE_ENTER,
+	DIE_INIT_SLAVE_PROCESS,
+	DIE_INIT_SLAVE_LEAVE,
+	DIE_KDEBUG_ENTER,
+	DIE_KDEBUG_LEAVE,
+	DIE_KDUMP_ENTER,
+	DIE_KDUMP_LEAVE,
+};
+
+#endif
diff --git a/arch/ia64/include/asm/kexec.h b/arch/ia64/include/asm/kexec.h
new file mode 100644
index 000000000000..541be835fc5a
--- /dev/null
+++ b/arch/ia64/include/asm/kexec.h
@@ -0,0 +1,44 @@
+#ifndef _ASM_IA64_KEXEC_H
+#define _ASM_IA64_KEXEC_H
+
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+/* Maximum address we can use for the control code buffer */
+#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+
+#define KEXEC_CONTROL_CODE_SIZE (8192 + 8192 + 4096)
+
+/* The native architecture */
+#define KEXEC_ARCH KEXEC_ARCH_IA_64
+
+#define kexec_flush_icache_page(page) do { \
+                unsigned long page_addr = (unsigned long)page_address(page); \
+                flush_icache_range(page_addr, page_addr + PAGE_SIZE); \
+        } while(0)
+
+extern struct kimage *ia64_kimage;
+extern const unsigned int relocate_new_kernel_size;
+extern void relocate_new_kernel(unsigned long, unsigned long,
+		struct ia64_boot_param *, unsigned long);
+static inline void
+crash_setup_regs(struct pt_regs *newregs, struct pt_regs *oldregs)
+{
+}
+extern struct resource efi_memmap_res;
+extern struct resource boot_param_res;
+extern void kdump_smp_send_stop(void);
+extern void kdump_smp_send_init(void);
+extern void kexec_disable_iosapic(void);
+extern void crash_save_this_cpu(void);
+struct rsvd_region;
+extern unsigned long kdump_find_rsvd_region(unsigned long size,
+		struct rsvd_region *rsvd_regions, int n);
+extern void kdump_cpu_freeze(struct unw_frame_info *info, void *arg);
+extern int kdump_status[];
+extern atomic_t kdump_cpu_freezed;
+extern atomic_t kdump_in_progress;
+
+#endif /* _ASM_IA64_KEXEC_H */
diff --git a/arch/ia64/include/asm/kmap_types.h b/arch/ia64/include/asm/kmap_types.h
new file mode 100644
index 000000000000..5d1658aa2b3b
--- /dev/null
+++ b/arch/ia64/include/asm/kmap_types.h
@@ -0,0 +1,30 @@
+#ifndef _ASM_IA64_KMAP_TYPES_H
+#define _ASM_IA64_KMAP_TYPES_H
+
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif /* _ASM_IA64_KMAP_TYPES_H */
diff --git a/arch/ia64/include/asm/kprobes.h b/arch/ia64/include/asm/kprobes.h
new file mode 100644
index 000000000000..dbf83fb28db3
--- /dev/null
+++ b/arch/ia64/include/asm/kprobes.h
@@ -0,0 +1,132 @@
+#ifndef _ASM_KPROBES_H
+#define _ASM_KPROBES_H
+/*
+ *  Kernel Probes (KProbes)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ * Copyright (C) Intel Corporation, 2005
+ *
+ * 2005-Apr     Rusty Lynch <rusty.lynch@intel.com> and Anil S Keshavamurthy
+ *              <anil.s.keshavamurthy@intel.com> adapted from i386
+ */
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+#include <asm/break.h>
+
+#define __ARCH_WANT_KPROBES_INSN_SLOT
+#define MAX_INSN_SIZE   2	/* last half is for kprobe-booster */
+#define BREAK_INST	(long)(__IA64_BREAK_KPROBE << 6)
+#define NOP_M_INST	(long)(1<<27)
+#define BRL_INST(i1, i2) ((long)((0xcL << 37) |	/* brl */ \
+				(0x1L << 12) |	/* many */ \
+				(((i1) & 1) << 36) | ((i2) << 13))) /* imm */
+
+typedef union cmp_inst {
+	struct {
+	unsigned long long qp : 6;
+	unsigned long long p1 : 6;
+	unsigned long long c  : 1;
+	unsigned long long r2 : 7;
+	unsigned long long r3 : 7;
+	unsigned long long p2 : 6;
+	unsigned long long ta : 1;
+	unsigned long long x2 : 2;
+	unsigned long long tb : 1;
+	unsigned long long opcode : 4;
+	unsigned long long reserved : 23;
+	}f;
+	unsigned long long l;
+} cmp_inst_t;
+
+struct kprobe;
+
+typedef struct _bundle {
+	struct {
+		unsigned long long template : 5;
+		unsigned long long slot0 : 41;
+		unsigned long long slot1_p0 : 64-46;
+	} quad0;
+	struct {
+		unsigned long long slot1_p1 : 41 - (64-46);
+		unsigned long long slot2 : 41;
+	} quad1;
+} __attribute__((__aligned__(16)))  bundle_t;
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+};
+
+#define	MAX_PARAM_RSE_SIZE	(0x60+0x60/0x3f)
+/* per-cpu kprobe control block */
+#define ARCH_PREV_KPROBE_SZ 2
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	struct pt_regs jprobe_saved_regs;
+	unsigned long jprobes_saved_stacked_regs[MAX_PARAM_RSE_SIZE];
+	unsigned long *bsp;
+	unsigned long cfm;
+	atomic_t prev_kprobe_index;
+	struct prev_kprobe prev_kprobe[ARCH_PREV_KPROBE_SZ];
+};
+
+#define kretprobe_blacklist_size 0
+
+#define SLOT0_OPCODE_SHIFT	(37)
+#define SLOT1_p1_OPCODE_SHIFT	(37 - (64-46))
+#define SLOT2_OPCODE_SHIFT 	(37)
+
+#define INDIRECT_CALL_OPCODE		(1)
+#define IP_RELATIVE_CALL_OPCODE		(5)
+#define IP_RELATIVE_BRANCH_OPCODE	(4)
+#define IP_RELATIVE_PREDICT_OPCODE	(7)
+#define LONG_BRANCH_OPCODE		(0xC)
+#define LONG_CALL_OPCODE		(0xD)
+#define flush_insn_slot(p)		do { } while (0)
+
+typedef struct kprobe_opcode {
+	bundle_t bundle;
+} kprobe_opcode_t;
+
+struct fnptr {
+	unsigned long ip;
+	unsigned long gp;
+};
+
+/* Architecture specific copy of original instruction*/
+struct arch_specific_insn {
+	/* copy of the instruction to be emulated */
+	kprobe_opcode_t *insn;
+ #define INST_FLAG_FIX_RELATIVE_IP_ADDR		1
+ #define INST_FLAG_FIX_BRANCH_REG		2
+ #define INST_FLAG_BREAK_INST			4
+ #define INST_FLAG_BOOSTABLE			8
+ 	unsigned long inst_flag;
+ 	unsigned short target_br_reg;
+	unsigned short slot;
+};
+
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+
+extern void invalidate_stacked_regs(void);
+extern void flush_register_stack(void);
+extern void arch_remove_kprobe(struct kprobe *p);
+
+#endif				/* _ASM_KPROBES_H */
diff --git a/arch/ia64/include/asm/kregs.h b/arch/ia64/include/asm/kregs.h
new file mode 100644
index 000000000000..aefcdfee7f23
--- /dev/null
+++ b/arch/ia64/include/asm/kregs.h
@@ -0,0 +1,165 @@
+#ifndef _ASM_IA64_KREGS_H
+#define _ASM_IA64_KREGS_H
+
+/*
+ * Copyright (C) 2001-2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * This file defines the kernel register usage convention used by Linux/ia64.
+ */
+
+/*
+ * Kernel registers:
+ */
+#define IA64_KR_IO_BASE		0	/* ar.k0: legacy I/O base address */
+#define IA64_KR_TSSD		1	/* ar.k1: IVE uses this as the TSSD */
+#define IA64_KR_PER_CPU_DATA	3	/* ar.k3: physical per-CPU base */
+#define IA64_KR_CURRENT_STACK	4	/* ar.k4: what's mapped in IA64_TR_CURRENT_STACK */
+#define IA64_KR_FPU_OWNER	5	/* ar.k5: fpu-owner (UP only, at the moment) */
+#define IA64_KR_CURRENT		6	/* ar.k6: "current" task pointer */
+#define IA64_KR_PT_BASE		7	/* ar.k7: page table base address (physical) */
+
+#define _IA64_KR_PASTE(x,y)	x##y
+#define _IA64_KR_PREFIX(n)	_IA64_KR_PASTE(ar.k, n)
+#define IA64_KR(n)		_IA64_KR_PREFIX(IA64_KR_##n)
+
+/*
+ * Translation registers:
+ */
+#define IA64_TR_KERNEL		0	/* itr0, dtr0: maps kernel image (code & data) */
+#define IA64_TR_PALCODE		1	/* itr1: maps PALcode as required by EFI */
+#define IA64_TR_CURRENT_STACK	1	/* dtr1: maps kernel's memory- & register-stacks */
+
+#define IA64_TR_ALLOC_BASE	2 	/* itr&dtr: Base of dynamic TR resource*/
+#define IA64_TR_ALLOC_MAX	32 	/* Max number for dynamic use*/
+
+/* Processor status register bits: */
+#define IA64_PSR_BE_BIT		1
+#define IA64_PSR_UP_BIT		2
+#define IA64_PSR_AC_BIT		3
+#define IA64_PSR_MFL_BIT	4
+#define IA64_PSR_MFH_BIT	5
+#define IA64_PSR_IC_BIT		13
+#define IA64_PSR_I_BIT		14
+#define IA64_PSR_PK_BIT		15
+#define IA64_PSR_DT_BIT		17
+#define IA64_PSR_DFL_BIT	18
+#define IA64_PSR_DFH_BIT	19
+#define IA64_PSR_SP_BIT		20
+#define IA64_PSR_PP_BIT		21
+#define IA64_PSR_DI_BIT		22
+#define IA64_PSR_SI_BIT		23
+#define IA64_PSR_DB_BIT		24
+#define IA64_PSR_LP_BIT		25
+#define IA64_PSR_TB_BIT		26
+#define IA64_PSR_RT_BIT		27
+/* The following are not affected by save_flags()/restore_flags(): */
+#define IA64_PSR_CPL0_BIT	32
+#define IA64_PSR_CPL1_BIT	33
+#define IA64_PSR_IS_BIT		34
+#define IA64_PSR_MC_BIT		35
+#define IA64_PSR_IT_BIT		36
+#define IA64_PSR_ID_BIT		37
+#define IA64_PSR_DA_BIT		38
+#define IA64_PSR_DD_BIT		39
+#define IA64_PSR_SS_BIT		40
+#define IA64_PSR_RI_BIT		41
+#define IA64_PSR_ED_BIT		43
+#define IA64_PSR_BN_BIT		44
+#define IA64_PSR_IA_BIT		45
+
+/* A mask of PSR bits that we generally don't want to inherit across a clone2() or an
+   execve().  Only list flags here that need to be cleared/set for BOTH clone2() and
+   execve().  */
+#define IA64_PSR_BITS_TO_CLEAR	(IA64_PSR_MFL | IA64_PSR_MFH | IA64_PSR_DB | IA64_PSR_LP | \
+				 IA64_PSR_TB  | IA64_PSR_ID  | IA64_PSR_DA | IA64_PSR_DD | \
+				 IA64_PSR_SS  | IA64_PSR_ED  | IA64_PSR_IA)
+#define IA64_PSR_BITS_TO_SET	(IA64_PSR_DFH | IA64_PSR_SP)
+
+#define IA64_PSR_BE	(__IA64_UL(1) << IA64_PSR_BE_BIT)
+#define IA64_PSR_UP	(__IA64_UL(1) << IA64_PSR_UP_BIT)
+#define IA64_PSR_AC	(__IA64_UL(1) << IA64_PSR_AC_BIT)
+#define IA64_PSR_MFL	(__IA64_UL(1) << IA64_PSR_MFL_BIT)
+#define IA64_PSR_MFH	(__IA64_UL(1) << IA64_PSR_MFH_BIT)
+#define IA64_PSR_IC	(__IA64_UL(1) << IA64_PSR_IC_BIT)
+#define IA64_PSR_I	(__IA64_UL(1) << IA64_PSR_I_BIT)
+#define IA64_PSR_PK	(__IA64_UL(1) << IA64_PSR_PK_BIT)
+#define IA64_PSR_DT	(__IA64_UL(1) << IA64_PSR_DT_BIT)
+#define IA64_PSR_DFL	(__IA64_UL(1) << IA64_PSR_DFL_BIT)
+#define IA64_PSR_DFH	(__IA64_UL(1) << IA64_PSR_DFH_BIT)
+#define IA64_PSR_SP	(__IA64_UL(1) << IA64_PSR_SP_BIT)
+#define IA64_PSR_PP	(__IA64_UL(1) << IA64_PSR_PP_BIT)
+#define IA64_PSR_DI	(__IA64_UL(1) << IA64_PSR_DI_BIT)
+#define IA64_PSR_SI	(__IA64_UL(1) << IA64_PSR_SI_BIT)
+#define IA64_PSR_DB	(__IA64_UL(1) << IA64_PSR_DB_BIT)
+#define IA64_PSR_LP	(__IA64_UL(1) << IA64_PSR_LP_BIT)
+#define IA64_PSR_TB	(__IA64_UL(1) << IA64_PSR_TB_BIT)
+#define IA64_PSR_RT	(__IA64_UL(1) << IA64_PSR_RT_BIT)
+/* The following are not affected by save_flags()/restore_flags(): */
+#define IA64_PSR_CPL	(__IA64_UL(3) << IA64_PSR_CPL0_BIT)
+#define IA64_PSR_IS	(__IA64_UL(1) << IA64_PSR_IS_BIT)
+#define IA64_PSR_MC	(__IA64_UL(1) << IA64_PSR_MC_BIT)
+#define IA64_PSR_IT	(__IA64_UL(1) << IA64_PSR_IT_BIT)
+#define IA64_PSR_ID	(__IA64_UL(1) << IA64_PSR_ID_BIT)
+#define IA64_PSR_DA	(__IA64_UL(1) << IA64_PSR_DA_BIT)
+#define IA64_PSR_DD	(__IA64_UL(1) << IA64_PSR_DD_BIT)
+#define IA64_PSR_SS	(__IA64_UL(1) << IA64_PSR_SS_BIT)
+#define IA64_PSR_RI	(__IA64_UL(3) << IA64_PSR_RI_BIT)
+#define IA64_PSR_ED	(__IA64_UL(1) << IA64_PSR_ED_BIT)
+#define IA64_PSR_BN	(__IA64_UL(1) << IA64_PSR_BN_BIT)
+#define IA64_PSR_IA	(__IA64_UL(1) << IA64_PSR_IA_BIT)
+
+/* User mask bits: */
+#define IA64_PSR_UM	(IA64_PSR_BE | IA64_PSR_UP | IA64_PSR_AC | IA64_PSR_MFL | IA64_PSR_MFH)
+
+/* Default Control Register */
+#define IA64_DCR_PP_BIT		 0	/* privileged performance monitor default */
+#define IA64_DCR_BE_BIT		 1	/* big-endian default */
+#define IA64_DCR_LC_BIT		 2	/* ia32 lock-check enable */
+#define IA64_DCR_DM_BIT		 8	/* defer TLB miss faults */
+#define IA64_DCR_DP_BIT		 9	/* defer page-not-present faults */
+#define IA64_DCR_DK_BIT		10	/* defer key miss faults */
+#define IA64_DCR_DX_BIT		11	/* defer key permission faults */
+#define IA64_DCR_DR_BIT		12	/* defer access right faults */
+#define IA64_DCR_DA_BIT		13	/* defer access bit faults */
+#define IA64_DCR_DD_BIT		14	/* defer debug faults */
+
+#define IA64_DCR_PP	(__IA64_UL(1) << IA64_DCR_PP_BIT)
+#define IA64_DCR_BE	(__IA64_UL(1) << IA64_DCR_BE_BIT)
+#define IA64_DCR_LC	(__IA64_UL(1) << IA64_DCR_LC_BIT)
+#define IA64_DCR_DM	(__IA64_UL(1) << IA64_DCR_DM_BIT)
+#define IA64_DCR_DP	(__IA64_UL(1) << IA64_DCR_DP_BIT)
+#define IA64_DCR_DK	(__IA64_UL(1) << IA64_DCR_DK_BIT)
+#define IA64_DCR_DX	(__IA64_UL(1) << IA64_DCR_DX_BIT)
+#define IA64_DCR_DR	(__IA64_UL(1) << IA64_DCR_DR_BIT)
+#define IA64_DCR_DA	(__IA64_UL(1) << IA64_DCR_DA_BIT)
+#define IA64_DCR_DD	(__IA64_UL(1) << IA64_DCR_DD_BIT)
+
+/* Interrupt Status Register */
+#define IA64_ISR_X_BIT		32	/* execute access */
+#define IA64_ISR_W_BIT		33	/* write access */
+#define IA64_ISR_R_BIT		34	/* read access */
+#define IA64_ISR_NA_BIT		35	/* non-access */
+#define IA64_ISR_SP_BIT		36	/* speculative load exception */
+#define IA64_ISR_RS_BIT		37	/* mandatory register-stack exception */
+#define IA64_ISR_IR_BIT		38	/* invalid register frame exception */
+#define IA64_ISR_CODE_MASK	0xf
+
+#define IA64_ISR_X	(__IA64_UL(1) << IA64_ISR_X_BIT)
+#define IA64_ISR_W	(__IA64_UL(1) << IA64_ISR_W_BIT)
+#define IA64_ISR_R	(__IA64_UL(1) << IA64_ISR_R_BIT)
+#define IA64_ISR_NA	(__IA64_UL(1) << IA64_ISR_NA_BIT)
+#define IA64_ISR_SP	(__IA64_UL(1) << IA64_ISR_SP_BIT)
+#define IA64_ISR_RS	(__IA64_UL(1) << IA64_ISR_RS_BIT)
+#define IA64_ISR_IR	(__IA64_UL(1) << IA64_ISR_IR_BIT)
+
+/* ISR code field for non-access instructions */
+#define IA64_ISR_CODE_TPA	0
+#define IA64_ISR_CODE_FC	1
+#define IA64_ISR_CODE_PROBE	2
+#define IA64_ISR_CODE_TAK	3
+#define IA64_ISR_CODE_LFETCH	4
+#define IA64_ISR_CODE_PROBEF	5
+
+#endif /* _ASM_IA64_kREGS_H */
diff --git a/arch/ia64/include/asm/kvm.h b/arch/ia64/include/asm/kvm.h
new file mode 100644
index 000000000000..f38472ac2267
--- /dev/null
+++ b/arch/ia64/include/asm/kvm.h
@@ -0,0 +1,211 @@
+#ifndef __ASM_IA64_KVM_H
+#define __ASM_IA64_KVM_H
+
+/*
+ * kvm structure definitions  for ia64
+ *
+ * Copyright (C) 2007 Xiantao Zhang <xiantao.zhang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+#include <asm/types.h>
+
+#include <linux/ioctl.h>
+
+/* Architectural interrupt line count. */
+#define KVM_NR_INTERRUPTS 256
+
+#define KVM_IOAPIC_NUM_PINS  48
+
+struct kvm_ioapic_state {
+	__u64 base_address;
+	__u32 ioregsel;
+	__u32 id;
+	__u32 irr;
+	__u32 pad;
+	union {
+		__u64 bits;
+		struct {
+			__u8 vector;
+			__u8 delivery_mode:3;
+			__u8 dest_mode:1;
+			__u8 delivery_status:1;
+			__u8 polarity:1;
+			__u8 remote_irr:1;
+			__u8 trig_mode:1;
+			__u8 mask:1;
+			__u8 reserve:7;
+			__u8 reserved[4];
+			__u8 dest_id;
+		} fields;
+	} redirtbl[KVM_IOAPIC_NUM_PINS];
+};
+
+#define KVM_IRQCHIP_PIC_MASTER   0
+#define KVM_IRQCHIP_PIC_SLAVE    1
+#define KVM_IRQCHIP_IOAPIC       2
+
+#define KVM_CONTEXT_SIZE	8*1024
+
+struct kvm_fpreg {
+	union {
+		unsigned long bits[2];
+		long double __dummy;	/* force 16-byte alignment */
+	} u;
+};
+
+union context {
+	/* 8K size */
+	char	dummy[KVM_CONTEXT_SIZE];
+	struct {
+		unsigned long       psr;
+		unsigned long       pr;
+		unsigned long       caller_unat;
+		unsigned long       pad;
+		unsigned long       gr[32];
+		unsigned long       ar[128];
+		unsigned long       br[8];
+		unsigned long       cr[128];
+		unsigned long       rr[8];
+		unsigned long       ibr[8];
+		unsigned long       dbr[8];
+		unsigned long       pkr[8];
+		struct kvm_fpreg   fr[128];
+	};
+};
+
+struct thash_data {
+	union {
+		struct {
+			unsigned long p    :  1; /* 0 */
+			unsigned long rv1  :  1; /* 1 */
+			unsigned long ma   :  3; /* 2-4 */
+			unsigned long a    :  1; /* 5 */
+			unsigned long d    :  1; /* 6 */
+			unsigned long pl   :  2; /* 7-8 */
+			unsigned long ar   :  3; /* 9-11 */
+			unsigned long ppn  : 38; /* 12-49 */
+			unsigned long rv2  :  2; /* 50-51 */
+			unsigned long ed   :  1; /* 52 */
+			unsigned long ig1  : 11; /* 53-63 */
+		};
+		struct {
+			unsigned long __rv1 : 53;     /* 0-52 */
+			unsigned long contiguous : 1; /*53 */
+			unsigned long tc : 1;         /* 54 TR or TC */
+			unsigned long cl : 1;
+			/* 55 I side or D side cache line */
+			unsigned long len  :  4;      /* 56-59 */
+			unsigned long io  : 1;	/* 60 entry is for io or not */
+			unsigned long nomap : 1;
+			/* 61 entry cann't be inserted into machine TLB.*/
+			unsigned long checked : 1;
+			/* 62 for VTLB/VHPT sanity check */
+			unsigned long invalid : 1;
+			/* 63 invalid entry */
+		};
+		unsigned long page_flags;
+	};                  /* same for VHPT and TLB */
+
+	union {
+		struct {
+			unsigned long rv3  :  2;
+			unsigned long ps   :  6;
+			unsigned long key  : 24;
+			unsigned long rv4  : 32;
+		};
+		unsigned long itir;
+	};
+	union {
+		struct {
+			unsigned long ig2  :  12;
+			unsigned long vpn  :  49;
+			unsigned long vrn  :   3;
+		};
+		unsigned long ifa;
+		unsigned long vadr;
+		struct {
+			unsigned long tag  :  63;
+			unsigned long ti   :  1;
+		};
+		unsigned long etag;
+	};
+	union {
+		struct thash_data *next;
+		unsigned long rid;
+		unsigned long gpaddr;
+	};
+};
+
+#define	NITRS	8
+#define NDTRS	8
+
+struct saved_vpd {
+	unsigned long  vhpi;
+	unsigned long  vgr[16];
+	unsigned long  vbgr[16];
+	unsigned long  vnat;
+	unsigned long  vbnat;
+	unsigned long  vcpuid[5];
+	unsigned long  vpsr;
+	unsigned long  vpr;
+	unsigned long  vcr[128];
+};
+
+struct kvm_regs {
+	char *saved_guest;
+	char *saved_stack;
+	struct saved_vpd vpd;
+	/*Arch-regs*/
+	int mp_state;
+	unsigned long vmm_rr;
+	/* TR and TC.  */
+	struct thash_data itrs[NITRS];
+	struct thash_data dtrs[NDTRS];
+	/* Bit is set if there is a tr/tc for the region.  */
+	unsigned char itr_regions;
+	unsigned char dtr_regions;
+	unsigned char tc_regions;
+
+	char irq_check;
+	unsigned long saved_itc;
+	unsigned long itc_check;
+	unsigned long timer_check;
+	unsigned long timer_pending;
+	unsigned long last_itc;
+
+	unsigned long vrr[8];
+	unsigned long ibr[8];
+	unsigned long dbr[8];
+	unsigned long insvc[4];		/* Interrupt in service.  */
+	unsigned long xtp;
+
+	unsigned long metaphysical_rr0; /* from kvm_arch (so is pinned) */
+	unsigned long metaphysical_rr4;	/* from kvm_arch (so is pinned) */
+	unsigned long metaphysical_saved_rr0; /* from kvm_arch          */
+	unsigned long metaphysical_saved_rr4; /* from kvm_arch          */
+	unsigned long fp_psr;       /*used for lazy float register */
+	unsigned long saved_gp;
+	/*for phycial  emulation */
+};
+
+struct kvm_sregs {
+};
+
+struct kvm_fpu {
+};
+
+#endif
diff --git a/arch/ia64/include/asm/kvm_host.h b/arch/ia64/include/asm/kvm_host.h
new file mode 100644
index 000000000000..1efe513a9941
--- /dev/null
+++ b/arch/ia64/include/asm/kvm_host.h
@@ -0,0 +1,527 @@
+/*
+ * kvm_host.h: used for kvm module, and hold ia64-specific sections.
+ *
+ * Copyright (C) 2007, Intel Corporation.
+ *
+ * Xiantao Zhang <xiantao.zhang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+#ifndef __ASM_KVM_HOST_H
+#define __ASM_KVM_HOST_H
+
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/kvm.h>
+#include <linux/kvm_para.h>
+#include <linux/kvm_types.h>
+
+#include <asm/pal.h>
+#include <asm/sal.h>
+
+#define KVM_MAX_VCPUS 4
+#define KVM_MEMORY_SLOTS 32
+/* memory slots that does not exposed to userspace */
+#define KVM_PRIVATE_MEM_SLOTS 4
+
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+
+/* define exit reasons from vmm to kvm*/
+#define EXIT_REASON_VM_PANIC		0
+#define EXIT_REASON_MMIO_INSTRUCTION	1
+#define EXIT_REASON_PAL_CALL		2
+#define EXIT_REASON_SAL_CALL		3
+#define EXIT_REASON_SWITCH_RR6		4
+#define EXIT_REASON_VM_DESTROY		5
+#define EXIT_REASON_EXTERNAL_INTERRUPT	6
+#define EXIT_REASON_IPI			7
+#define EXIT_REASON_PTC_G		8
+
+/*Define vmm address space and vm data space.*/
+#define KVM_VMM_SIZE (16UL<<20)
+#define KVM_VMM_SHIFT 24
+#define KVM_VMM_BASE 0xD000000000000000UL
+#define VMM_SIZE (8UL<<20)
+
+/*
+ * Define vm_buffer, used by PAL Services, base address.
+ * Note: vmbuffer is in the VMM-BLOCK, the size must be < 8M
+ */
+#define KVM_VM_BUFFER_BASE (KVM_VMM_BASE + VMM_SIZE)
+#define KVM_VM_BUFFER_SIZE (8UL<<20)
+
+/*Define Virtual machine data layout.*/
+#define KVM_VM_DATA_SHIFT  24
+#define KVM_VM_DATA_SIZE (1UL << KVM_VM_DATA_SHIFT)
+#define KVM_VM_DATA_BASE (KVM_VMM_BASE + KVM_VMM_SIZE)
+
+
+#define KVM_P2M_BASE    KVM_VM_DATA_BASE
+#define KVM_P2M_OFS     0
+#define KVM_P2M_SIZE    (8UL << 20)
+
+#define KVM_VHPT_BASE   (KVM_P2M_BASE + KVM_P2M_SIZE)
+#define KVM_VHPT_OFS    KVM_P2M_SIZE
+#define KVM_VHPT_BLOCK_SIZE   (2UL << 20)
+#define VHPT_SHIFT      18
+#define VHPT_SIZE       (1UL << VHPT_SHIFT)
+#define VHPT_NUM_ENTRIES (1<<(VHPT_SHIFT-5))
+
+#define KVM_VTLB_BASE   (KVM_VHPT_BASE+KVM_VHPT_BLOCK_SIZE)
+#define KVM_VTLB_OFS    (KVM_VHPT_OFS+KVM_VHPT_BLOCK_SIZE)
+#define KVM_VTLB_BLOCK_SIZE   (1UL<<20)
+#define VTLB_SHIFT      17
+#define VTLB_SIZE       (1UL<<VTLB_SHIFT)
+#define VTLB_NUM_ENTRIES (1<<(VTLB_SHIFT-5))
+
+#define KVM_VPD_BASE   (KVM_VTLB_BASE+KVM_VTLB_BLOCK_SIZE)
+#define KVM_VPD_OFS    (KVM_VTLB_OFS+KVM_VTLB_BLOCK_SIZE)
+#define KVM_VPD_BLOCK_SIZE   (2UL<<20)
+#define VPD_SHIFT       16
+#define VPD_SIZE        (1UL<<VPD_SHIFT)
+
+#define KVM_VCPU_BASE   (KVM_VPD_BASE+KVM_VPD_BLOCK_SIZE)
+#define KVM_VCPU_OFS    (KVM_VPD_OFS+KVM_VPD_BLOCK_SIZE)
+#define KVM_VCPU_BLOCK_SIZE   (2UL<<20)
+#define VCPU_SHIFT 18
+#define VCPU_SIZE (1UL<<VCPU_SHIFT)
+#define MAX_VCPU_NUM KVM_VCPU_BLOCK_SIZE/VCPU_SIZE
+
+#define KVM_VM_BASE     (KVM_VCPU_BASE+KVM_VCPU_BLOCK_SIZE)
+#define KVM_VM_OFS      (KVM_VCPU_OFS+KVM_VCPU_BLOCK_SIZE)
+#define KVM_VM_BLOCK_SIZE     (1UL<<19)
+
+#define KVM_MEM_DIRTY_LOG_BASE (KVM_VM_BASE+KVM_VM_BLOCK_SIZE)
+#define KVM_MEM_DIRTY_LOG_OFS  (KVM_VM_OFS+KVM_VM_BLOCK_SIZE)
+#define KVM_MEM_DIRTY_LOG_SIZE (1UL<<19)
+
+/* Get vpd, vhpt, tlb, vcpu, base*/
+#define VPD_ADDR(n) (KVM_VPD_BASE+n*VPD_SIZE)
+#define VHPT_ADDR(n) (KVM_VHPT_BASE+n*VHPT_SIZE)
+#define VTLB_ADDR(n) (KVM_VTLB_BASE+n*VTLB_SIZE)
+#define VCPU_ADDR(n) (KVM_VCPU_BASE+n*VCPU_SIZE)
+
+/*IO section definitions*/
+#define IOREQ_READ      1
+#define IOREQ_WRITE     0
+
+#define STATE_IOREQ_NONE        0
+#define STATE_IOREQ_READY       1
+#define STATE_IOREQ_INPROCESS   2
+#define STATE_IORESP_READY      3
+
+/*Guest Physical address layout.*/
+#define GPFN_MEM        (0UL << 60) /* Guest pfn is normal mem */
+#define GPFN_FRAME_BUFFER   (1UL << 60) /* VGA framebuffer */
+#define GPFN_LOW_MMIO       (2UL << 60) /* Low MMIO range */
+#define GPFN_PIB        (3UL << 60) /* PIB base */
+#define GPFN_IOSAPIC        (4UL << 60) /* IOSAPIC base */
+#define GPFN_LEGACY_IO      (5UL << 60) /* Legacy I/O base */
+#define GPFN_GFW        (6UL << 60) /* Guest Firmware */
+#define GPFN_HIGH_MMIO      (7UL << 60) /* High MMIO range */
+
+#define GPFN_IO_MASK        (7UL << 60) /* Guest pfn is I/O type */
+#define GPFN_INV_MASK       (1UL << 63) /* Guest pfn is invalid */
+#define INVALID_MFN       (~0UL)
+#define MEM_G   (1UL << 30)
+#define MEM_M   (1UL << 20)
+#define MMIO_START       (3 * MEM_G)
+#define MMIO_SIZE        (512 * MEM_M)
+#define VGA_IO_START     0xA0000UL
+#define VGA_IO_SIZE      0x20000
+#define LEGACY_IO_START  (MMIO_START + MMIO_SIZE)
+#define LEGACY_IO_SIZE   (64 * MEM_M)
+#define IO_SAPIC_START   0xfec00000UL
+#define IO_SAPIC_SIZE    0x100000
+#define PIB_START 0xfee00000UL
+#define PIB_SIZE 0x200000
+#define GFW_START        (4 * MEM_G - 16 * MEM_M)
+#define GFW_SIZE         (16 * MEM_M)
+
+/*Deliver mode, defined for ioapic.c*/
+#define dest_Fixed IOSAPIC_FIXED
+#define dest_LowestPrio IOSAPIC_LOWEST_PRIORITY
+
+#define NMI_VECTOR      		2
+#define ExtINT_VECTOR       		0
+#define NULL_VECTOR     		(-1)
+#define IA64_SPURIOUS_INT_VECTOR    	0x0f
+
+#define VCPU_LID(v) (((u64)(v)->vcpu_id) << 24)
+
+/*
+ *Delivery mode
+ */
+#define SAPIC_DELIV_SHIFT      8
+#define SAPIC_FIXED            0x0
+#define SAPIC_LOWEST_PRIORITY  0x1
+#define SAPIC_PMI              0x2
+#define SAPIC_NMI              0x4
+#define SAPIC_INIT             0x5
+#define SAPIC_EXTINT           0x7
+
+/*
+ * vcpu->requests bit members for arch
+ */
+#define KVM_REQ_PTC_G		32
+#define KVM_REQ_RESUME		33
+
+#define KVM_PAGES_PER_HPAGE	1
+
+struct kvm;
+struct kvm_vcpu;
+struct kvm_guest_debug{
+};
+
+struct kvm_mmio_req {
+	uint64_t addr;          /*  physical address		*/
+	uint64_t size;          /*  size in bytes		*/
+	uint64_t data;          /*  data (or paddr of data)     */
+	uint8_t state:4;
+	uint8_t dir:1;          /*  1=read, 0=write             */
+};
+
+/*Pal data struct */
+struct kvm_pal_call{
+	/*In area*/
+	uint64_t gr28;
+	uint64_t gr29;
+	uint64_t gr30;
+	uint64_t gr31;
+	/*Out area*/
+	struct ia64_pal_retval ret;
+};
+
+/* Sal data structure */
+struct kvm_sal_call{
+	/*In area*/
+	uint64_t in0;
+	uint64_t in1;
+	uint64_t in2;
+	uint64_t in3;
+	uint64_t in4;
+	uint64_t in5;
+	uint64_t in6;
+	uint64_t in7;
+	struct sal_ret_values ret;
+};
+
+/*Guest change rr6*/
+struct kvm_switch_rr6 {
+	uint64_t old_rr;
+	uint64_t new_rr;
+};
+
+union ia64_ipi_a{
+	unsigned long val;
+	struct {
+		unsigned long rv  : 3;
+		unsigned long ir  : 1;
+		unsigned long eid : 8;
+		unsigned long id  : 8;
+		unsigned long ib_base : 44;
+	};
+};
+
+union ia64_ipi_d {
+	unsigned long val;
+	struct {
+		unsigned long vector : 8;
+		unsigned long dm  : 3;
+		unsigned long ig  : 53;
+	};
+};
+
+/*ipi check exit data*/
+struct kvm_ipi_data{
+	union ia64_ipi_a addr;
+	union ia64_ipi_d data;
+};
+
+/*global purge data*/
+struct kvm_ptc_g {
+	unsigned long vaddr;
+	unsigned long rr;
+	unsigned long ps;
+	struct kvm_vcpu *vcpu;
+};
+
+/*Exit control data */
+struct exit_ctl_data{
+	uint32_t exit_reason;
+	uint32_t vm_status;
+	union {
+		struct kvm_mmio_req	ioreq;
+		struct kvm_pal_call	pal_data;
+		struct kvm_sal_call	sal_data;
+		struct kvm_switch_rr6	rr_data;
+		struct kvm_ipi_data	ipi_data;
+		struct kvm_ptc_g	ptc_g_data;
+	} u;
+};
+
+union pte_flags {
+	unsigned long val;
+	struct {
+		unsigned long p    :  1; /*0      */
+		unsigned long      :  1; /* 1     */
+		unsigned long ma   :  3; /* 2-4   */
+		unsigned long a    :  1; /* 5     */
+		unsigned long d    :  1; /* 6     */
+		unsigned long pl   :  2; /* 7-8   */
+		unsigned long ar   :  3; /* 9-11  */
+		unsigned long ppn  : 38; /* 12-49 */
+		unsigned long      :  2; /* 50-51 */
+		unsigned long ed   :  1; /* 52    */
+	};
+};
+
+union ia64_pta {
+	unsigned long val;
+	struct {
+		unsigned long ve : 1;
+		unsigned long reserved0 : 1;
+		unsigned long size : 6;
+		unsigned long vf : 1;
+		unsigned long reserved1 : 6;
+		unsigned long base : 49;
+	};
+};
+
+struct thash_cb {
+	/* THASH base information */
+	struct thash_data	*hash; /* hash table pointer */
+	union ia64_pta		pta;
+	int           num;
+};
+
+struct kvm_vcpu_stat {
+};
+
+struct kvm_vcpu_arch {
+	int launched;
+	int last_exit;
+	int last_run_cpu;
+	int vmm_tr_slot;
+	int vm_tr_slot;
+
+#define KVM_MP_STATE_RUNNABLE          0
+#define KVM_MP_STATE_UNINITIALIZED     1
+#define KVM_MP_STATE_INIT_RECEIVED     2
+#define KVM_MP_STATE_HALTED            3
+	int mp_state;
+
+#define MAX_PTC_G_NUM			3
+	int ptc_g_count;
+	struct kvm_ptc_g ptc_g_data[MAX_PTC_G_NUM];
+
+	/*halt timer to wake up sleepy vcpus*/
+	struct hrtimer hlt_timer;
+	long ht_active;
+
+	struct kvm_lapic *apic;    /* kernel irqchip context */
+	struct vpd *vpd;
+
+	/* Exit data for vmm_transition*/
+	struct exit_ctl_data exit_data;
+
+	cpumask_t cache_coherent_map;
+
+	unsigned long vmm_rr;
+	unsigned long host_rr6;
+	unsigned long psbits[8];
+	unsigned long cr_iipa;
+	unsigned long cr_isr;
+	unsigned long vsa_base;
+	unsigned long dirty_log_lock_pa;
+	unsigned long __gp;
+	/* TR and TC.  */
+	struct thash_data itrs[NITRS];
+	struct thash_data dtrs[NDTRS];
+	/* Bit is set if there is a tr/tc for the region.  */
+	unsigned char itr_regions;
+	unsigned char dtr_regions;
+	unsigned char tc_regions;
+	/* purge all */
+	unsigned long ptce_base;
+	unsigned long ptce_count[2];
+	unsigned long ptce_stride[2];
+	/* itc/itm */
+	unsigned long last_itc;
+	long itc_offset;
+	unsigned long itc_check;
+	unsigned long timer_check;
+	unsigned long timer_pending;
+
+	unsigned long vrr[8];
+	unsigned long ibr[8];
+	unsigned long dbr[8];
+	unsigned long insvc[4];		/* Interrupt in service.  */
+	unsigned long xtp;
+
+	unsigned long metaphysical_rr0; /* from kvm_arch (so is pinned) */
+	unsigned long metaphysical_rr4;	/* from kvm_arch (so is pinned) */
+	unsigned long metaphysical_saved_rr0; /* from kvm_arch          */
+	unsigned long metaphysical_saved_rr4; /* from kvm_arch          */
+	unsigned long fp_psr;       /*used for lazy float register */
+	unsigned long saved_gp;
+	/*for phycial  emulation */
+	int mode_flags;
+	struct thash_cb vtlb;
+	struct thash_cb vhpt;
+	char irq_check;
+	char irq_new_pending;
+
+	unsigned long opcode;
+	unsigned long cause;
+	union context host;
+	union context guest;
+};
+
+struct kvm_vm_stat {
+	u64 remote_tlb_flush;
+};
+
+struct kvm_sal_data {
+	unsigned long boot_ip;
+	unsigned long boot_gp;
+};
+
+struct kvm_arch {
+	unsigned long	vm_base;
+	unsigned long	metaphysical_rr0;
+	unsigned long	metaphysical_rr4;
+	unsigned long	vmm_init_rr;
+	unsigned long	vhpt_base;
+	unsigned long	vtlb_base;
+	unsigned long 	vpd_base;
+	spinlock_t dirty_log_lock;
+	struct kvm_ioapic *vioapic;
+	struct kvm_vm_stat stat;
+	struct kvm_sal_data rdv_sal_data;
+};
+
+union cpuid3_t {
+	u64 value;
+	struct {
+		u64 number : 8;
+		u64 revision : 8;
+		u64 model : 8;
+		u64 family : 8;
+		u64 archrev : 8;
+		u64 rv : 24;
+	};
+};
+
+struct kvm_pt_regs {
+	/* The following registers are saved by SAVE_MIN: */
+	unsigned long b6;  /* scratch */
+	unsigned long b7;  /* scratch */
+
+	unsigned long ar_csd; /* used by cmp8xchg16 (scratch) */
+	unsigned long ar_ssd; /* reserved for future use (scratch) */
+
+	unsigned long r8;  /* scratch (return value register 0) */
+	unsigned long r9;  /* scratch (return value register 1) */
+	unsigned long r10; /* scratch (return value register 2) */
+	unsigned long r11; /* scratch (return value register 3) */
+
+	unsigned long cr_ipsr; /* interrupted task's psr */
+	unsigned long cr_iip;  /* interrupted task's instruction pointer */
+	unsigned long cr_ifs;  /* interrupted task's function state */
+
+	unsigned long ar_unat; /* interrupted task's NaT register (preserved) */
+	unsigned long ar_pfs;  /* prev function state  */
+	unsigned long ar_rsc;  /* RSE configuration */
+	/* The following two are valid only if cr_ipsr.cpl > 0: */
+	unsigned long ar_rnat;  /* RSE NaT */
+	unsigned long ar_bspstore; /* RSE bspstore */
+
+	unsigned long pr;  /* 64 predicate registers (1 bit each) */
+	unsigned long b0;  /* return pointer (bp) */
+	unsigned long loadrs;  /* size of dirty partition << 16 */
+
+	unsigned long r1;  /* the gp pointer */
+	unsigned long r12; /* interrupted task's memory stack pointer */
+	unsigned long r13; /* thread pointer */
+
+	unsigned long ar_fpsr;  /* floating point status (preserved) */
+	unsigned long r15;  /* scratch */
+
+	/* The remaining registers are NOT saved for system calls.  */
+	unsigned long r14;  /* scratch */
+	unsigned long r2;  /* scratch */
+	unsigned long r3;  /* scratch */
+	unsigned long r16;  /* scratch */
+	unsigned long r17;  /* scratch */
+	unsigned long r18;  /* scratch */
+	unsigned long r19;  /* scratch */
+	unsigned long r20;  /* scratch */
+	unsigned long r21;  /* scratch */
+	unsigned long r22;  /* scratch */
+	unsigned long r23;  /* scratch */
+	unsigned long r24;  /* scratch */
+	unsigned long r25;  /* scratch */
+	unsigned long r26;  /* scratch */
+	unsigned long r27;  /* scratch */
+	unsigned long r28;  /* scratch */
+	unsigned long r29;  /* scratch */
+	unsigned long r30;  /* scratch */
+	unsigned long r31;  /* scratch */
+	unsigned long ar_ccv;  /* compare/exchange value (scratch) */
+
+	/*
+	 * Floating point registers that the kernel considers scratch:
+	 */
+	struct ia64_fpreg f6;  /* scratch */
+	struct ia64_fpreg f7;  /* scratch */
+	struct ia64_fpreg f8;  /* scratch */
+	struct ia64_fpreg f9;  /* scratch */
+	struct ia64_fpreg f10;  /* scratch */
+	struct ia64_fpreg f11;  /* scratch */
+
+	unsigned long r4;  /* preserved */
+	unsigned long r5;  /* preserved */
+	unsigned long r6;  /* preserved */
+	unsigned long r7;  /* preserved */
+	unsigned long eml_unat;    /* used for emulating instruction */
+	unsigned long pad0;     /* alignment pad */
+};
+
+static inline struct kvm_pt_regs *vcpu_regs(struct kvm_vcpu *v)
+{
+	return (struct kvm_pt_regs *) ((unsigned long) v + IA64_STK_OFFSET) - 1;
+}
+
+typedef int kvm_vmm_entry(void);
+typedef void kvm_tramp_entry(union context *host, union context *guest);
+
+struct kvm_vmm_info{
+	struct module	*module;
+	kvm_vmm_entry 	*vmm_entry;
+	kvm_tramp_entry *tramp_entry;
+	unsigned long 	vmm_ivt;
+};
+
+int kvm_highest_pending_irq(struct kvm_vcpu *vcpu);
+int kvm_emulate_halt(struct kvm_vcpu *vcpu);
+int kvm_pal_emul(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run);
+void kvm_sal_emul(struct kvm_vcpu *vcpu);
+
+static inline void kvm_inject_nmi(struct kvm_vcpu *vcpu) {}
+
+#endif
diff --git a/arch/ia64/include/asm/kvm_para.h b/arch/ia64/include/asm/kvm_para.h
new file mode 100644
index 000000000000..0d6d8ca07b8c
--- /dev/null
+++ b/arch/ia64/include/asm/kvm_para.h
@@ -0,0 +1,27 @@
+#ifndef __IA64_KVM_PARA_H
+#define __IA64_KVM_PARA_H
+
+/*
+ * Copyright (C) 2007 Xiantao Zhang <xiantao.zhang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+ * Place - Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+static inline unsigned int kvm_arch_para_features(void)
+{
+	return 0;
+}
+
+#endif
diff --git a/arch/ia64/include/asm/libata-portmap.h b/arch/ia64/include/asm/libata-portmap.h
new file mode 100644
index 000000000000..0e00c9a9f410
--- /dev/null
+++ b/arch/ia64/include/asm/libata-portmap.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_IA64_LIBATA_PORTMAP_H
+#define __ASM_IA64_LIBATA_PORTMAP_H
+
+#define ATA_PRIMARY_CMD		0x1F0
+#define ATA_PRIMARY_CTL		0x3F6
+#define ATA_PRIMARY_IRQ(dev)	isa_irq_to_vector(14)
+
+#define ATA_SECONDARY_CMD	0x170
+#define ATA_SECONDARY_CTL	0x376
+#define ATA_SECONDARY_IRQ(dev)	isa_irq_to_vector(15)
+
+#endif
diff --git a/arch/ia64/include/asm/linkage.h b/arch/ia64/include/asm/linkage.h
new file mode 100644
index 000000000000..ef22a45c1890
--- /dev/null
+++ b/arch/ia64/include/asm/linkage.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#ifndef __ASSEMBLY__
+
+#define asmlinkage CPP_ASMLINKAGE __attribute__((syscall_linkage))
+
+#else
+
+#include <asm/asmmacro.h>
+
+#endif
+
+#endif
diff --git a/arch/ia64/include/asm/local.h b/arch/ia64/include/asm/local.h
new file mode 100644
index 000000000000..c11c530f74d0
--- /dev/null
+++ b/arch/ia64/include/asm/local.h
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/arch/ia64/include/asm/machvec.h b/arch/ia64/include/asm/machvec.h
new file mode 100644
index 000000000000..2b850ccafef5
--- /dev/null
+++ b/arch/ia64/include/asm/machvec.h
@@ -0,0 +1,460 @@
+/*
+ * Machine vector for IA-64.
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
+ * Copyright (C) Vijay Chander <vijay@engr.sgi.com>
+ * Copyright (C) 1999-2001, 2003-2004 Hewlett-Packard Co.
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#ifndef _ASM_IA64_MACHVEC_H
+#define _ASM_IA64_MACHVEC_H
+
+#include <linux/types.h>
+
+/* forward declarations: */
+struct device;
+struct pt_regs;
+struct scatterlist;
+struct page;
+struct mm_struct;
+struct pci_bus;
+struct task_struct;
+struct pci_dev;
+struct msi_desc;
+struct dma_attrs;
+
+typedef void ia64_mv_setup_t (char **);
+typedef void ia64_mv_cpu_init_t (void);
+typedef void ia64_mv_irq_init_t (void);
+typedef void ia64_mv_send_ipi_t (int, int, int, int);
+typedef void ia64_mv_timer_interrupt_t (int, void *);
+typedef void ia64_mv_global_tlb_purge_t (struct mm_struct *, unsigned long, unsigned long, unsigned long);
+typedef void ia64_mv_tlb_migrate_finish_t (struct mm_struct *);
+typedef u8 ia64_mv_irq_to_vector (int);
+typedef unsigned int ia64_mv_local_vector_to_irq (u8);
+typedef char *ia64_mv_pci_get_legacy_mem_t (struct pci_bus *);
+typedef int ia64_mv_pci_legacy_read_t (struct pci_bus *, u16 port, u32 *val,
+				       u8 size);
+typedef int ia64_mv_pci_legacy_write_t (struct pci_bus *, u16 port, u32 val,
+					u8 size);
+typedef void ia64_mv_migrate_t(struct task_struct * task);
+typedef void ia64_mv_pci_fixup_bus_t (struct pci_bus *);
+typedef void ia64_mv_kernel_launch_event_t(void);
+
+/* DMA-mapping interface: */
+typedef void ia64_mv_dma_init (void);
+typedef void *ia64_mv_dma_alloc_coherent (struct device *, size_t, dma_addr_t *, gfp_t);
+typedef void ia64_mv_dma_free_coherent (struct device *, size_t, void *, dma_addr_t);
+typedef dma_addr_t ia64_mv_dma_map_single (struct device *, void *, size_t, int);
+typedef void ia64_mv_dma_unmap_single (struct device *, dma_addr_t, size_t, int);
+typedef int ia64_mv_dma_map_sg (struct device *, struct scatterlist *, int, int);
+typedef void ia64_mv_dma_unmap_sg (struct device *, struct scatterlist *, int, int);
+typedef void ia64_mv_dma_sync_single_for_cpu (struct device *, dma_addr_t, size_t, int);
+typedef void ia64_mv_dma_sync_sg_for_cpu (struct device *, struct scatterlist *, int, int);
+typedef void ia64_mv_dma_sync_single_for_device (struct device *, dma_addr_t, size_t, int);
+typedef void ia64_mv_dma_sync_sg_for_device (struct device *, struct scatterlist *, int, int);
+typedef int ia64_mv_dma_mapping_error(struct device *, dma_addr_t dma_addr);
+typedef int ia64_mv_dma_supported (struct device *, u64);
+
+typedef dma_addr_t ia64_mv_dma_map_single_attrs (struct device *, void *, size_t, int, struct dma_attrs *);
+typedef void ia64_mv_dma_unmap_single_attrs (struct device *, dma_addr_t, size_t, int, struct dma_attrs *);
+typedef int ia64_mv_dma_map_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *);
+typedef void ia64_mv_dma_unmap_sg_attrs (struct device *, struct scatterlist *, int, int, struct dma_attrs *);
+
+/*
+ * WARNING: The legacy I/O space is _architected_.  Platforms are
+ * expected to follow this architected model (see Section 10.7 in the
+ * IA-64 Architecture Software Developer's Manual).  Unfortunately,
+ * some broken machines do not follow that model, which is why we have
+ * to make the inX/outX operations part of the machine vector.
+ * Platform designers should follow the architected model whenever
+ * possible.
+ */
+typedef unsigned int ia64_mv_inb_t (unsigned long);
+typedef unsigned int ia64_mv_inw_t (unsigned long);
+typedef unsigned int ia64_mv_inl_t (unsigned long);
+typedef void ia64_mv_outb_t (unsigned char, unsigned long);
+typedef void ia64_mv_outw_t (unsigned short, unsigned long);
+typedef void ia64_mv_outl_t (unsigned int, unsigned long);
+typedef void ia64_mv_mmiowb_t (void);
+typedef unsigned char ia64_mv_readb_t (const volatile void __iomem *);
+typedef unsigned short ia64_mv_readw_t (const volatile void __iomem *);
+typedef unsigned int ia64_mv_readl_t (const volatile void __iomem *);
+typedef unsigned long ia64_mv_readq_t (const volatile void __iomem *);
+typedef unsigned char ia64_mv_readb_relaxed_t (const volatile void __iomem *);
+typedef unsigned short ia64_mv_readw_relaxed_t (const volatile void __iomem *);
+typedef unsigned int ia64_mv_readl_relaxed_t (const volatile void __iomem *);
+typedef unsigned long ia64_mv_readq_relaxed_t (const volatile void __iomem *);
+
+typedef int ia64_mv_setup_msi_irq_t (struct pci_dev *pdev, struct msi_desc *);
+typedef void ia64_mv_teardown_msi_irq_t (unsigned int irq);
+
+static inline void
+machvec_noop (void)
+{
+}
+
+static inline void
+machvec_noop_mm (struct mm_struct *mm)
+{
+}
+
+static inline void
+machvec_noop_task (struct task_struct *task)
+{
+}
+
+static inline void
+machvec_noop_bus (struct pci_bus *bus)
+{
+}
+
+extern void machvec_setup (char **);
+extern void machvec_timer_interrupt (int, void *);
+extern void machvec_dma_sync_single (struct device *, dma_addr_t, size_t, int);
+extern void machvec_dma_sync_sg (struct device *, struct scatterlist *, int, int);
+extern void machvec_tlb_migrate_finish (struct mm_struct *);
+
+# if defined (CONFIG_IA64_HP_SIM)
+#  include <asm/machvec_hpsim.h>
+# elif defined (CONFIG_IA64_DIG)
+#  include <asm/machvec_dig.h>
+# elif defined (CONFIG_IA64_HP_ZX1)
+#  include <asm/machvec_hpzx1.h>
+# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
+#  include <asm/machvec_hpzx1_swiotlb.h>
+# elif defined (CONFIG_IA64_SGI_SN2)
+#  include <asm/machvec_sn2.h>
+# elif defined (CONFIG_IA64_SGI_UV)
+#  include <asm/machvec_uv.h>
+# elif defined (CONFIG_IA64_GENERIC)
+
+# ifdef MACHVEC_PLATFORM_HEADER
+#  include MACHVEC_PLATFORM_HEADER
+# else
+#  define platform_name		ia64_mv.name
+#  define platform_setup	ia64_mv.setup
+#  define platform_cpu_init	ia64_mv.cpu_init
+#  define platform_irq_init	ia64_mv.irq_init
+#  define platform_send_ipi	ia64_mv.send_ipi
+#  define platform_timer_interrupt	ia64_mv.timer_interrupt
+#  define platform_global_tlb_purge	ia64_mv.global_tlb_purge
+#  define platform_tlb_migrate_finish	ia64_mv.tlb_migrate_finish
+#  define platform_dma_init		ia64_mv.dma_init
+#  define platform_dma_alloc_coherent	ia64_mv.dma_alloc_coherent
+#  define platform_dma_free_coherent	ia64_mv.dma_free_coherent
+#  define platform_dma_map_single_attrs	ia64_mv.dma_map_single_attrs
+#  define platform_dma_unmap_single_attrs	ia64_mv.dma_unmap_single_attrs
+#  define platform_dma_map_sg_attrs	ia64_mv.dma_map_sg_attrs
+#  define platform_dma_unmap_sg_attrs	ia64_mv.dma_unmap_sg_attrs
+#  define platform_dma_sync_single_for_cpu ia64_mv.dma_sync_single_for_cpu
+#  define platform_dma_sync_sg_for_cpu	ia64_mv.dma_sync_sg_for_cpu
+#  define platform_dma_sync_single_for_device ia64_mv.dma_sync_single_for_device
+#  define platform_dma_sync_sg_for_device ia64_mv.dma_sync_sg_for_device
+#  define platform_dma_mapping_error		ia64_mv.dma_mapping_error
+#  define platform_dma_supported	ia64_mv.dma_supported
+#  define platform_irq_to_vector	ia64_mv.irq_to_vector
+#  define platform_local_vector_to_irq	ia64_mv.local_vector_to_irq
+#  define platform_pci_get_legacy_mem	ia64_mv.pci_get_legacy_mem
+#  define platform_pci_legacy_read	ia64_mv.pci_legacy_read
+#  define platform_pci_legacy_write	ia64_mv.pci_legacy_write
+#  define platform_inb		ia64_mv.inb
+#  define platform_inw		ia64_mv.inw
+#  define platform_inl		ia64_mv.inl
+#  define platform_outb		ia64_mv.outb
+#  define platform_outw		ia64_mv.outw
+#  define platform_outl		ia64_mv.outl
+#  define platform_mmiowb	ia64_mv.mmiowb
+#  define platform_readb        ia64_mv.readb
+#  define platform_readw        ia64_mv.readw
+#  define platform_readl        ia64_mv.readl
+#  define platform_readq        ia64_mv.readq
+#  define platform_readb_relaxed        ia64_mv.readb_relaxed
+#  define platform_readw_relaxed        ia64_mv.readw_relaxed
+#  define platform_readl_relaxed        ia64_mv.readl_relaxed
+#  define platform_readq_relaxed        ia64_mv.readq_relaxed
+#  define platform_migrate		ia64_mv.migrate
+#  define platform_setup_msi_irq	ia64_mv.setup_msi_irq
+#  define platform_teardown_msi_irq	ia64_mv.teardown_msi_irq
+#  define platform_pci_fixup_bus	ia64_mv.pci_fixup_bus
+#  define platform_kernel_launch_event	ia64_mv.kernel_launch_event
+# endif
+
+/* __attribute__((__aligned__(16))) is required to make size of the
+ * structure multiple of 16 bytes.
+ * This will fillup the holes created because of section 3.3.1 in
+ * Software Conventions guide.
+ */
+struct ia64_machine_vector {
+	const char *name;
+	ia64_mv_setup_t *setup;
+	ia64_mv_cpu_init_t *cpu_init;
+	ia64_mv_irq_init_t *irq_init;
+	ia64_mv_send_ipi_t *send_ipi;
+	ia64_mv_timer_interrupt_t *timer_interrupt;
+	ia64_mv_global_tlb_purge_t *global_tlb_purge;
+	ia64_mv_tlb_migrate_finish_t *tlb_migrate_finish;
+	ia64_mv_dma_init *dma_init;
+	ia64_mv_dma_alloc_coherent *dma_alloc_coherent;
+	ia64_mv_dma_free_coherent *dma_free_coherent;
+	ia64_mv_dma_map_single_attrs *dma_map_single_attrs;
+	ia64_mv_dma_unmap_single_attrs *dma_unmap_single_attrs;
+	ia64_mv_dma_map_sg_attrs *dma_map_sg_attrs;
+	ia64_mv_dma_unmap_sg_attrs *dma_unmap_sg_attrs;
+	ia64_mv_dma_sync_single_for_cpu *dma_sync_single_for_cpu;
+	ia64_mv_dma_sync_sg_for_cpu *dma_sync_sg_for_cpu;
+	ia64_mv_dma_sync_single_for_device *dma_sync_single_for_device;
+	ia64_mv_dma_sync_sg_for_device *dma_sync_sg_for_device;
+	ia64_mv_dma_mapping_error *dma_mapping_error;
+	ia64_mv_dma_supported *dma_supported;
+	ia64_mv_irq_to_vector *irq_to_vector;
+	ia64_mv_local_vector_to_irq *local_vector_to_irq;
+	ia64_mv_pci_get_legacy_mem_t *pci_get_legacy_mem;
+	ia64_mv_pci_legacy_read_t *pci_legacy_read;
+	ia64_mv_pci_legacy_write_t *pci_legacy_write;
+	ia64_mv_inb_t *inb;
+	ia64_mv_inw_t *inw;
+	ia64_mv_inl_t *inl;
+	ia64_mv_outb_t *outb;
+	ia64_mv_outw_t *outw;
+	ia64_mv_outl_t *outl;
+	ia64_mv_mmiowb_t *mmiowb;
+	ia64_mv_readb_t *readb;
+	ia64_mv_readw_t *readw;
+	ia64_mv_readl_t *readl;
+	ia64_mv_readq_t *readq;
+	ia64_mv_readb_relaxed_t *readb_relaxed;
+	ia64_mv_readw_relaxed_t *readw_relaxed;
+	ia64_mv_readl_relaxed_t *readl_relaxed;
+	ia64_mv_readq_relaxed_t *readq_relaxed;
+	ia64_mv_migrate_t *migrate;
+	ia64_mv_setup_msi_irq_t *setup_msi_irq;
+	ia64_mv_teardown_msi_irq_t *teardown_msi_irq;
+	ia64_mv_pci_fixup_bus_t *pci_fixup_bus;
+	ia64_mv_kernel_launch_event_t *kernel_launch_event;
+} __attribute__((__aligned__(16))); /* align attrib? see above comment */
+
+#define MACHVEC_INIT(name)			\
+{						\
+	#name,					\
+	platform_setup,				\
+	platform_cpu_init,			\
+	platform_irq_init,			\
+	platform_send_ipi,			\
+	platform_timer_interrupt,		\
+	platform_global_tlb_purge,		\
+	platform_tlb_migrate_finish,		\
+	platform_dma_init,			\
+	platform_dma_alloc_coherent,		\
+	platform_dma_free_coherent,		\
+	platform_dma_map_single_attrs,		\
+	platform_dma_unmap_single_attrs,	\
+	platform_dma_map_sg_attrs,		\
+	platform_dma_unmap_sg_attrs,		\
+	platform_dma_sync_single_for_cpu,	\
+	platform_dma_sync_sg_for_cpu,		\
+	platform_dma_sync_single_for_device,	\
+	platform_dma_sync_sg_for_device,	\
+	platform_dma_mapping_error,			\
+	platform_dma_supported,			\
+	platform_irq_to_vector,			\
+	platform_local_vector_to_irq,		\
+	platform_pci_get_legacy_mem,		\
+	platform_pci_legacy_read,		\
+	platform_pci_legacy_write,		\
+	platform_inb,				\
+	platform_inw,				\
+	platform_inl,				\
+	platform_outb,				\
+	platform_outw,				\
+	platform_outl,				\
+	platform_mmiowb,			\
+	platform_readb,				\
+	platform_readw,				\
+	platform_readl,				\
+	platform_readq,				\
+	platform_readb_relaxed,			\
+	platform_readw_relaxed,			\
+	platform_readl_relaxed,			\
+	platform_readq_relaxed,			\
+	platform_migrate,			\
+	platform_setup_msi_irq,			\
+	platform_teardown_msi_irq,		\
+	platform_pci_fixup_bus,			\
+	platform_kernel_launch_event            \
+}
+
+extern struct ia64_machine_vector ia64_mv;
+extern void machvec_init (const char *name);
+extern void machvec_init_from_cmdline(const char *cmdline);
+
+# else
+#  error Unknown configuration.  Update arch/ia64/include/asm/machvec.h.
+# endif /* CONFIG_IA64_GENERIC */
+
+/*
+ * Declare default routines which aren't declared anywhere else:
+ */
+extern ia64_mv_dma_init			swiotlb_init;
+extern ia64_mv_dma_alloc_coherent	swiotlb_alloc_coherent;
+extern ia64_mv_dma_free_coherent	swiotlb_free_coherent;
+extern ia64_mv_dma_map_single		swiotlb_map_single;
+extern ia64_mv_dma_map_single_attrs	swiotlb_map_single_attrs;
+extern ia64_mv_dma_unmap_single		swiotlb_unmap_single;
+extern ia64_mv_dma_unmap_single_attrs	swiotlb_unmap_single_attrs;
+extern ia64_mv_dma_map_sg		swiotlb_map_sg;
+extern ia64_mv_dma_map_sg_attrs		swiotlb_map_sg_attrs;
+extern ia64_mv_dma_unmap_sg		swiotlb_unmap_sg;
+extern ia64_mv_dma_unmap_sg_attrs	swiotlb_unmap_sg_attrs;
+extern ia64_mv_dma_sync_single_for_cpu	swiotlb_sync_single_for_cpu;
+extern ia64_mv_dma_sync_sg_for_cpu	swiotlb_sync_sg_for_cpu;
+extern ia64_mv_dma_sync_single_for_device swiotlb_sync_single_for_device;
+extern ia64_mv_dma_sync_sg_for_device	swiotlb_sync_sg_for_device;
+extern ia64_mv_dma_mapping_error	swiotlb_dma_mapping_error;
+extern ia64_mv_dma_supported		swiotlb_dma_supported;
+
+/*
+ * Define default versions so we can extend machvec for new platforms without having
+ * to update the machvec files for all existing platforms.
+ */
+#ifndef platform_setup
+# define platform_setup			machvec_setup
+#endif
+#ifndef platform_cpu_init
+# define platform_cpu_init		machvec_noop
+#endif
+#ifndef platform_irq_init
+# define platform_irq_init		machvec_noop
+#endif
+
+#ifndef platform_send_ipi
+# define platform_send_ipi		ia64_send_ipi	/* default to architected version */
+#endif
+#ifndef platform_timer_interrupt
+# define platform_timer_interrupt 	machvec_timer_interrupt
+#endif
+#ifndef platform_global_tlb_purge
+# define platform_global_tlb_purge	ia64_global_tlb_purge /* default to architected version */
+#endif
+#ifndef platform_tlb_migrate_finish
+# define platform_tlb_migrate_finish	machvec_noop_mm
+#endif
+#ifndef platform_kernel_launch_event
+# define platform_kernel_launch_event	machvec_noop
+#endif
+#ifndef platform_dma_init
+# define platform_dma_init		swiotlb_init
+#endif
+#ifndef platform_dma_alloc_coherent
+# define platform_dma_alloc_coherent	swiotlb_alloc_coherent
+#endif
+#ifndef platform_dma_free_coherent
+# define platform_dma_free_coherent	swiotlb_free_coherent
+#endif
+#ifndef platform_dma_map_single_attrs
+# define platform_dma_map_single_attrs	swiotlb_map_single_attrs
+#endif
+#ifndef platform_dma_unmap_single_attrs
+# define platform_dma_unmap_single_attrs	swiotlb_unmap_single_attrs
+#endif
+#ifndef platform_dma_map_sg_attrs
+# define platform_dma_map_sg_attrs	swiotlb_map_sg_attrs
+#endif
+#ifndef platform_dma_unmap_sg_attrs
+# define platform_dma_unmap_sg_attrs	swiotlb_unmap_sg_attrs
+#endif
+#ifndef platform_dma_sync_single_for_cpu
+# define platform_dma_sync_single_for_cpu	swiotlb_sync_single_for_cpu
+#endif
+#ifndef platform_dma_sync_sg_for_cpu
+# define platform_dma_sync_sg_for_cpu		swiotlb_sync_sg_for_cpu
+#endif
+#ifndef platform_dma_sync_single_for_device
+# define platform_dma_sync_single_for_device	swiotlb_sync_single_for_device
+#endif
+#ifndef platform_dma_sync_sg_for_device
+# define platform_dma_sync_sg_for_device	swiotlb_sync_sg_for_device
+#endif
+#ifndef platform_dma_mapping_error
+# define platform_dma_mapping_error		swiotlb_dma_mapping_error
+#endif
+#ifndef platform_dma_supported
+# define  platform_dma_supported	swiotlb_dma_supported
+#endif
+#ifndef platform_irq_to_vector
+# define platform_irq_to_vector		__ia64_irq_to_vector
+#endif
+#ifndef platform_local_vector_to_irq
+# define platform_local_vector_to_irq	__ia64_local_vector_to_irq
+#endif
+#ifndef platform_pci_get_legacy_mem
+# define platform_pci_get_legacy_mem	ia64_pci_get_legacy_mem
+#endif
+#ifndef platform_pci_legacy_read
+# define platform_pci_legacy_read	ia64_pci_legacy_read
+extern int ia64_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size);
+#endif
+#ifndef platform_pci_legacy_write
+# define platform_pci_legacy_write	ia64_pci_legacy_write
+extern int ia64_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size);
+#endif
+#ifndef platform_inb
+# define platform_inb		__ia64_inb
+#endif
+#ifndef platform_inw
+# define platform_inw		__ia64_inw
+#endif
+#ifndef platform_inl
+# define platform_inl		__ia64_inl
+#endif
+#ifndef platform_outb
+# define platform_outb		__ia64_outb
+#endif
+#ifndef platform_outw
+# define platform_outw		__ia64_outw
+#endif
+#ifndef platform_outl
+# define platform_outl		__ia64_outl
+#endif
+#ifndef platform_mmiowb
+# define platform_mmiowb	__ia64_mmiowb
+#endif
+#ifndef platform_readb
+# define platform_readb		__ia64_readb
+#endif
+#ifndef platform_readw
+# define platform_readw		__ia64_readw
+#endif
+#ifndef platform_readl
+# define platform_readl		__ia64_readl
+#endif
+#ifndef platform_readq
+# define platform_readq		__ia64_readq
+#endif
+#ifndef platform_readb_relaxed
+# define platform_readb_relaxed	__ia64_readb_relaxed
+#endif
+#ifndef platform_readw_relaxed
+# define platform_readw_relaxed	__ia64_readw_relaxed
+#endif
+#ifndef platform_readl_relaxed
+# define platform_readl_relaxed	__ia64_readl_relaxed
+#endif
+#ifndef platform_readq_relaxed
+# define platform_readq_relaxed	__ia64_readq_relaxed
+#endif
+#ifndef platform_migrate
+# define platform_migrate machvec_noop_task
+#endif
+#ifndef platform_setup_msi_irq
+# define platform_setup_msi_irq		((ia64_mv_setup_msi_irq_t*)NULL)
+#endif
+#ifndef platform_teardown_msi_irq
+# define platform_teardown_msi_irq	((ia64_mv_teardown_msi_irq_t*)NULL)
+#endif
+#ifndef platform_pci_fixup_bus
+# define platform_pci_fixup_bus	machvec_noop_bus
+#endif
+
+#endif /* _ASM_IA64_MACHVEC_H */
diff --git a/arch/ia64/include/asm/machvec_dig.h b/arch/ia64/include/asm/machvec_dig.h
new file mode 100644
index 000000000000..8a0752f40987
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_dig.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_IA64_MACHVEC_DIG_h
+#define _ASM_IA64_MACHVEC_DIG_h
+
+extern ia64_mv_setup_t dig_setup;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name		"dig"
+#define platform_setup		dig_setup
+
+#endif /* _ASM_IA64_MACHVEC_DIG_h */
diff --git a/arch/ia64/include/asm/machvec_hpsim.h b/arch/ia64/include/asm/machvec_hpsim.h
new file mode 100644
index 000000000000..cf72fc87fdfe
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_hpsim.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_IA64_MACHVEC_HPSIM_h
+#define _ASM_IA64_MACHVEC_HPSIM_h
+
+extern ia64_mv_setup_t hpsim_setup;
+extern ia64_mv_irq_init_t hpsim_irq_init;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name		"hpsim"
+#define platform_setup		hpsim_setup
+#define platform_irq_init	hpsim_irq_init
+
+#endif /* _ASM_IA64_MACHVEC_HPSIM_h */
diff --git a/arch/ia64/include/asm/machvec_hpzx1.h b/arch/ia64/include/asm/machvec_hpzx1.h
new file mode 100644
index 000000000000..2f57f5144b9f
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_hpzx1.h
@@ -0,0 +1,37 @@
+#ifndef _ASM_IA64_MACHVEC_HPZX1_h
+#define _ASM_IA64_MACHVEC_HPZX1_h
+
+extern ia64_mv_setup_t			dig_setup;
+extern ia64_mv_dma_alloc_coherent	sba_alloc_coherent;
+extern ia64_mv_dma_free_coherent	sba_free_coherent;
+extern ia64_mv_dma_map_single_attrs	sba_map_single_attrs;
+extern ia64_mv_dma_unmap_single_attrs	sba_unmap_single_attrs;
+extern ia64_mv_dma_map_sg_attrs		sba_map_sg_attrs;
+extern ia64_mv_dma_unmap_sg_attrs	sba_unmap_sg_attrs;
+extern ia64_mv_dma_supported		sba_dma_supported;
+extern ia64_mv_dma_mapping_error	sba_dma_mapping_error;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name				"hpzx1"
+#define platform_setup				dig_setup
+#define platform_dma_init			machvec_noop
+#define platform_dma_alloc_coherent		sba_alloc_coherent
+#define platform_dma_free_coherent		sba_free_coherent
+#define platform_dma_map_single_attrs		sba_map_single_attrs
+#define platform_dma_unmap_single_attrs		sba_unmap_single_attrs
+#define platform_dma_map_sg_attrs		sba_map_sg_attrs
+#define platform_dma_unmap_sg_attrs		sba_unmap_sg_attrs
+#define platform_dma_sync_single_for_cpu	machvec_dma_sync_single
+#define platform_dma_sync_sg_for_cpu		machvec_dma_sync_sg
+#define platform_dma_sync_single_for_device	machvec_dma_sync_single
+#define platform_dma_sync_sg_for_device		machvec_dma_sync_sg
+#define platform_dma_supported			sba_dma_supported
+#define platform_dma_mapping_error		sba_dma_mapping_error
+
+#endif /* _ASM_IA64_MACHVEC_HPZX1_h */
diff --git a/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h b/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h
new file mode 100644
index 000000000000..a842cdda827b
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_hpzx1_swiotlb.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h
+#define _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h
+
+extern ia64_mv_setup_t				dig_setup;
+extern ia64_mv_dma_alloc_coherent		hwsw_alloc_coherent;
+extern ia64_mv_dma_free_coherent		hwsw_free_coherent;
+extern ia64_mv_dma_map_single_attrs		hwsw_map_single_attrs;
+extern ia64_mv_dma_unmap_single_attrs		hwsw_unmap_single_attrs;
+extern ia64_mv_dma_map_sg_attrs			hwsw_map_sg_attrs;
+extern ia64_mv_dma_unmap_sg_attrs		hwsw_unmap_sg_attrs;
+extern ia64_mv_dma_supported			hwsw_dma_supported;
+extern ia64_mv_dma_mapping_error		hwsw_dma_mapping_error;
+extern ia64_mv_dma_sync_single_for_cpu		hwsw_sync_single_for_cpu;
+extern ia64_mv_dma_sync_sg_for_cpu		hwsw_sync_sg_for_cpu;
+extern ia64_mv_dma_sync_single_for_device	hwsw_sync_single_for_device;
+extern ia64_mv_dma_sync_sg_for_device		hwsw_sync_sg_for_device;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name				"hpzx1_swiotlb"
+
+#define platform_setup				dig_setup
+#define platform_dma_init			machvec_noop
+#define platform_dma_alloc_coherent		hwsw_alloc_coherent
+#define platform_dma_free_coherent		hwsw_free_coherent
+#define platform_dma_map_single_attrs		hwsw_map_single_attrs
+#define platform_dma_unmap_single_attrs		hwsw_unmap_single_attrs
+#define platform_dma_map_sg_attrs		hwsw_map_sg_attrs
+#define platform_dma_unmap_sg_attrs		hwsw_unmap_sg_attrs
+#define platform_dma_supported			hwsw_dma_supported
+#define platform_dma_mapping_error		hwsw_dma_mapping_error
+#define platform_dma_sync_single_for_cpu	hwsw_sync_single_for_cpu
+#define platform_dma_sync_sg_for_cpu		hwsw_sync_sg_for_cpu
+#define platform_dma_sync_single_for_device	hwsw_sync_single_for_device
+#define platform_dma_sync_sg_for_device		hwsw_sync_sg_for_device
+
+#endif /* _ASM_IA64_MACHVEC_HPZX1_SWIOTLB_h */
diff --git a/arch/ia64/include/asm/machvec_init.h b/arch/ia64/include/asm/machvec_init.h
new file mode 100644
index 000000000000..7f21249fba3f
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_init.h
@@ -0,0 +1,33 @@
+#include <asm/machvec.h>
+
+extern ia64_mv_send_ipi_t ia64_send_ipi;
+extern ia64_mv_global_tlb_purge_t ia64_global_tlb_purge;
+extern ia64_mv_irq_to_vector __ia64_irq_to_vector;
+extern ia64_mv_local_vector_to_irq __ia64_local_vector_to_irq;
+extern ia64_mv_pci_get_legacy_mem_t ia64_pci_get_legacy_mem;
+extern ia64_mv_pci_legacy_read_t ia64_pci_legacy_read;
+extern ia64_mv_pci_legacy_write_t ia64_pci_legacy_write;
+
+extern ia64_mv_inb_t __ia64_inb;
+extern ia64_mv_inw_t __ia64_inw;
+extern ia64_mv_inl_t __ia64_inl;
+extern ia64_mv_outb_t __ia64_outb;
+extern ia64_mv_outw_t __ia64_outw;
+extern ia64_mv_outl_t __ia64_outl;
+extern ia64_mv_mmiowb_t __ia64_mmiowb;
+extern ia64_mv_readb_t __ia64_readb;
+extern ia64_mv_readw_t __ia64_readw;
+extern ia64_mv_readl_t __ia64_readl;
+extern ia64_mv_readq_t __ia64_readq;
+extern ia64_mv_readb_t __ia64_readb_relaxed;
+extern ia64_mv_readw_t __ia64_readw_relaxed;
+extern ia64_mv_readl_t __ia64_readl_relaxed;
+extern ia64_mv_readq_t __ia64_readq_relaxed;
+
+#define MACHVEC_HELPER(name)									\
+ struct ia64_machine_vector machvec_##name __attribute__ ((unused, __section__ (".machvec")))	\
+	= MACHVEC_INIT(name);
+
+#define MACHVEC_DEFINE(name)	MACHVEC_HELPER(name)
+
+MACHVEC_DEFINE(MACHVEC_PLATFORM_NAME)
diff --git a/arch/ia64/include/asm/machvec_sn2.h b/arch/ia64/include/asm/machvec_sn2.h
new file mode 100644
index 000000000000..781308ea7b88
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_sn2.h
@@ -0,0 +1,139 @@
+/*
+ * Copyright (c) 2002-2003,2006 Silicon Graphics, Inc.  All Rights Reserved.
+ * 
+ * This program is free software; you can redistribute it and/or modify it 
+ * under the terms of version 2 of the GNU General Public License 
+ * as published by the Free Software Foundation.
+ * 
+ * This program is distributed in the hope that it would be useful, but 
+ * WITHOUT ANY WARRANTY; without even the implied warranty of 
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 
+ * 
+ * Further, this software is distributed without any warranty that it is 
+ * free of the rightful claim of any third person regarding infringement 
+ * or the like.  Any license provided herein, whether implied or 
+ * otherwise, applies only to this software file.  Patent licenses, if 
+ * any, provided herein do not apply to combinations of this program with 
+ * other software, or any other product whatsoever.
+ * 
+ * You should have received a copy of the GNU General Public 
+ * License along with this program; if not, write the Free Software 
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ * 
+ * For further information regarding this notice, see: 
+ * 
+ * http://oss.sgi.com/projects/GenInfo/NoticeExplan
+ */
+
+#ifndef _ASM_IA64_MACHVEC_SN2_H
+#define _ASM_IA64_MACHVEC_SN2_H
+
+extern ia64_mv_setup_t sn_setup;
+extern ia64_mv_cpu_init_t sn_cpu_init;
+extern ia64_mv_irq_init_t sn_irq_init;
+extern ia64_mv_send_ipi_t sn2_send_IPI;
+extern ia64_mv_timer_interrupt_t sn_timer_interrupt;
+extern ia64_mv_global_tlb_purge_t sn2_global_tlb_purge;
+extern ia64_mv_tlb_migrate_finish_t	sn_tlb_migrate_finish;
+extern ia64_mv_irq_to_vector sn_irq_to_vector;
+extern ia64_mv_local_vector_to_irq sn_local_vector_to_irq;
+extern ia64_mv_pci_get_legacy_mem_t sn_pci_get_legacy_mem;
+extern ia64_mv_pci_legacy_read_t sn_pci_legacy_read;
+extern ia64_mv_pci_legacy_write_t sn_pci_legacy_write;
+extern ia64_mv_inb_t __sn_inb;
+extern ia64_mv_inw_t __sn_inw;
+extern ia64_mv_inl_t __sn_inl;
+extern ia64_mv_outb_t __sn_outb;
+extern ia64_mv_outw_t __sn_outw;
+extern ia64_mv_outl_t __sn_outl;
+extern ia64_mv_mmiowb_t __sn_mmiowb;
+extern ia64_mv_readb_t __sn_readb;
+extern ia64_mv_readw_t __sn_readw;
+extern ia64_mv_readl_t __sn_readl;
+extern ia64_mv_readq_t __sn_readq;
+extern ia64_mv_readb_t __sn_readb_relaxed;
+extern ia64_mv_readw_t __sn_readw_relaxed;
+extern ia64_mv_readl_t __sn_readl_relaxed;
+extern ia64_mv_readq_t __sn_readq_relaxed;
+extern ia64_mv_dma_alloc_coherent	sn_dma_alloc_coherent;
+extern ia64_mv_dma_free_coherent	sn_dma_free_coherent;
+extern ia64_mv_dma_map_single_attrs	sn_dma_map_single_attrs;
+extern ia64_mv_dma_unmap_single_attrs	sn_dma_unmap_single_attrs;
+extern ia64_mv_dma_map_sg_attrs		sn_dma_map_sg_attrs;
+extern ia64_mv_dma_unmap_sg_attrs	sn_dma_unmap_sg_attrs;
+extern ia64_mv_dma_sync_single_for_cpu	sn_dma_sync_single_for_cpu;
+extern ia64_mv_dma_sync_sg_for_cpu	sn_dma_sync_sg_for_cpu;
+extern ia64_mv_dma_sync_single_for_device sn_dma_sync_single_for_device;
+extern ia64_mv_dma_sync_sg_for_device	sn_dma_sync_sg_for_device;
+extern ia64_mv_dma_mapping_error	sn_dma_mapping_error;
+extern ia64_mv_dma_supported		sn_dma_supported;
+extern ia64_mv_migrate_t		sn_migrate;
+extern ia64_mv_kernel_launch_event_t	sn_kernel_launch_event;
+extern ia64_mv_setup_msi_irq_t		sn_setup_msi_irq;
+extern ia64_mv_teardown_msi_irq_t	sn_teardown_msi_irq;
+extern ia64_mv_pci_fixup_bus_t		sn_pci_fixup_bus;
+
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name			"sn2"
+#define platform_setup			sn_setup
+#define platform_cpu_init		sn_cpu_init
+#define platform_irq_init		sn_irq_init
+#define platform_send_ipi		sn2_send_IPI
+#define platform_timer_interrupt	sn_timer_interrupt
+#define platform_global_tlb_purge       sn2_global_tlb_purge
+#define platform_tlb_migrate_finish	sn_tlb_migrate_finish
+#define platform_pci_fixup		sn_pci_fixup
+#define platform_inb			__sn_inb
+#define platform_inw			__sn_inw
+#define platform_inl			__sn_inl
+#define platform_outb			__sn_outb
+#define platform_outw			__sn_outw
+#define platform_outl			__sn_outl
+#define platform_mmiowb			__sn_mmiowb
+#define platform_readb			__sn_readb
+#define platform_readw			__sn_readw
+#define platform_readl			__sn_readl
+#define platform_readq			__sn_readq
+#define platform_readb_relaxed		__sn_readb_relaxed
+#define platform_readw_relaxed		__sn_readw_relaxed
+#define platform_readl_relaxed		__sn_readl_relaxed
+#define platform_readq_relaxed		__sn_readq_relaxed
+#define platform_irq_to_vector		sn_irq_to_vector
+#define platform_local_vector_to_irq	sn_local_vector_to_irq
+#define platform_pci_get_legacy_mem	sn_pci_get_legacy_mem
+#define platform_pci_legacy_read	sn_pci_legacy_read
+#define platform_pci_legacy_write	sn_pci_legacy_write
+#define platform_dma_init		machvec_noop
+#define platform_dma_alloc_coherent	sn_dma_alloc_coherent
+#define platform_dma_free_coherent	sn_dma_free_coherent
+#define platform_dma_map_single_attrs	sn_dma_map_single_attrs
+#define platform_dma_unmap_single_attrs	sn_dma_unmap_single_attrs
+#define platform_dma_map_sg_attrs	sn_dma_map_sg_attrs
+#define platform_dma_unmap_sg_attrs	sn_dma_unmap_sg_attrs
+#define platform_dma_sync_single_for_cpu sn_dma_sync_single_for_cpu
+#define platform_dma_sync_sg_for_cpu	sn_dma_sync_sg_for_cpu
+#define platform_dma_sync_single_for_device sn_dma_sync_single_for_device
+#define platform_dma_sync_sg_for_device	sn_dma_sync_sg_for_device
+#define platform_dma_mapping_error		sn_dma_mapping_error
+#define platform_dma_supported		sn_dma_supported
+#define platform_migrate		sn_migrate
+#define platform_kernel_launch_event    sn_kernel_launch_event
+#ifdef CONFIG_PCI_MSI
+#define platform_setup_msi_irq		sn_setup_msi_irq
+#define platform_teardown_msi_irq	sn_teardown_msi_irq
+#else
+#define platform_setup_msi_irq		((ia64_mv_setup_msi_irq_t*)NULL)
+#define platform_teardown_msi_irq	((ia64_mv_teardown_msi_irq_t*)NULL)
+#endif
+#define platform_pci_fixup_bus		sn_pci_fixup_bus
+
+#include <asm/sn/io.h>
+
+#endif /* _ASM_IA64_MACHVEC_SN2_H */
diff --git a/arch/ia64/include/asm/machvec_uv.h b/arch/ia64/include/asm/machvec_uv.h
new file mode 100644
index 000000000000..2931447f3813
--- /dev/null
+++ b/arch/ia64/include/asm/machvec_uv.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV Core Functions
+ *
+ * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_MACHVEC_UV_H
+#define _ASM_IA64_MACHVEC_UV_H
+
+extern ia64_mv_setup_t uv_setup;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure.  When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name			"uv"
+#define platform_setup			uv_setup
+
+#endif /* _ASM_IA64_MACHVEC_UV_H */
diff --git a/arch/ia64/include/asm/mc146818rtc.h b/arch/ia64/include/asm/mc146818rtc.h
new file mode 100644
index 000000000000..407787a237ba
--- /dev/null
+++ b/arch/ia64/include/asm/mc146818rtc.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_IA64_MC146818RTC_H
+#define _ASM_IA64_MC146818RTC_H
+
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+
+/* empty include file to satisfy the include in genrtc.c */
+
+#endif /* _ASM_IA64_MC146818RTC_H */
diff --git a/arch/ia64/include/asm/mca.h b/arch/ia64/include/asm/mca.h
new file mode 100644
index 000000000000..18a4321349a3
--- /dev/null
+++ b/arch/ia64/include/asm/mca.h
@@ -0,0 +1,179 @@
+/*
+ * File:	mca.h
+ * Purpose:	Machine check handling specific defines
+ *
+ * Copyright (C) 1999, 2004 Silicon Graphics, Inc.
+ * Copyright (C) Vijay Chander <vijay@engr.sgi.com>
+ * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
+ * Copyright (C) Russ Anderson <rja@sgi.com>
+ */
+
+#ifndef _ASM_IA64_MCA_H
+#define _ASM_IA64_MCA_H
+
+#if !defined(__ASSEMBLY__)
+
+#include <linux/interrupt.h>
+#include <linux/types.h>
+
+#include <asm/param.h>
+#include <asm/sal.h>
+#include <asm/processor.h>
+#include <asm/mca_asm.h>
+
+#define IA64_MCA_RENDEZ_TIMEOUT		(20 * 1000)	/* value in milliseconds - 20 seconds */
+
+typedef struct ia64_fptr {
+	unsigned long fp;
+	unsigned long gp;
+} ia64_fptr_t;
+
+typedef union cmcv_reg_u {
+	u64	cmcv_regval;
+	struct	{
+		u64	cmcr_vector		: 8;
+		u64	cmcr_reserved1		: 4;
+		u64	cmcr_ignored1		: 1;
+		u64	cmcr_reserved2		: 3;
+		u64	cmcr_mask		: 1;
+		u64	cmcr_ignored2		: 47;
+	} cmcv_reg_s;
+
+} cmcv_reg_t;
+
+#define cmcv_mask		cmcv_reg_s.cmcr_mask
+#define cmcv_vector		cmcv_reg_s.cmcr_vector
+
+enum {
+	IA64_MCA_RENDEZ_CHECKIN_NOTDONE	=	0x0,
+	IA64_MCA_RENDEZ_CHECKIN_DONE	=	0x1,
+	IA64_MCA_RENDEZ_CHECKIN_INIT	=	0x2,
+	IA64_MCA_RENDEZ_CHECKIN_CONCURRENT_MCA	=	0x3,
+};
+
+/* Information maintained by the MC infrastructure */
+typedef struct ia64_mc_info_s {
+	u64		imi_mca_handler;
+	size_t		imi_mca_handler_size;
+	u64		imi_monarch_init_handler;
+	size_t		imi_monarch_init_handler_size;
+	u64		imi_slave_init_handler;
+	size_t		imi_slave_init_handler_size;
+	u8		imi_rendez_checkin[NR_CPUS];
+
+} ia64_mc_info_t;
+
+/* Handover state from SAL to OS and vice versa, for both MCA and INIT events.
+ * Besides the handover state, it also contains some saved registers from the
+ * time of the event.
+ * Note: mca_asm.S depends on the precise layout of this structure.
+ */
+
+struct ia64_sal_os_state {
+
+	/* SAL to OS */
+	u64			os_gp;			/* GP of the os registered with the SAL, physical */
+	u64			pal_proc;		/* PAL_PROC entry point, physical */
+	u64			sal_proc;		/* SAL_PROC entry point, physical */
+	u64			rv_rc;			/* MCA - Rendezvous state, INIT - reason code */
+	u64			proc_state_param;	/* from R18 */
+	u64			monarch;		/* 1 for a monarch event, 0 for a slave */
+
+	/* common */
+	u64			sal_ra;			/* Return address in SAL, physical */
+	u64			sal_gp;			/* GP of the SAL - physical */
+	pal_min_state_area_t	*pal_min_state;		/* from R17.  physical in asm, virtual in C */
+	/* Previous values of IA64_KR(CURRENT) and IA64_KR(CURRENT_STACK).
+	 * Note: if the MCA/INIT recovery code wants to resume to a new context
+	 * then it must change these values to reflect the new kernel stack.
+	 */
+	u64			prev_IA64_KR_CURRENT;	/* previous value of IA64_KR(CURRENT) */
+	u64			prev_IA64_KR_CURRENT_STACK;
+	struct task_struct	*prev_task;		/* previous task, NULL if it is not useful */
+	/* Some interrupt registers are not saved in minstate, pt_regs or
+	 * switch_stack.  Because MCA/INIT can occur when interrupts are
+	 * disabled, we need to save the additional interrupt registers over
+	 * MCA/INIT and resume.
+	 */
+	u64			isr;
+	u64			ifa;
+	u64			itir;
+	u64			iipa;
+	u64			iim;
+	u64			iha;
+
+	/* OS to SAL */
+	u64			os_status;		/* OS status to SAL, enum below */
+	u64			context;		/* 0 if return to same context
+							   1 if return to new context */
+};
+
+enum {
+	IA64_MCA_CORRECTED	=	0x0,	/* Error has been corrected by OS_MCA */
+	IA64_MCA_WARM_BOOT	=	-1,	/* Warm boot of the system need from SAL */
+	IA64_MCA_COLD_BOOT	=	-2,	/* Cold boot of the system need from SAL */
+	IA64_MCA_HALT		=	-3	/* System to be halted by SAL */
+};
+
+enum {
+	IA64_INIT_RESUME	=	0x0,	/* Resume after return from INIT */
+	IA64_INIT_WARM_BOOT	=	-1,	/* Warm boot of the system need from SAL */
+};
+
+enum {
+	IA64_MCA_SAME_CONTEXT	=	0x0,	/* SAL to return to same context */
+	IA64_MCA_NEW_CONTEXT	=	-1	/* SAL to return to new context */
+};
+
+/* Per-CPU MCA state that is too big for normal per-CPU variables.  */
+
+struct ia64_mca_cpu {
+	u64 mca_stack[KERNEL_STACK_SIZE/8];
+	u64 init_stack[KERNEL_STACK_SIZE/8];
+};
+
+/* Array of physical addresses of each CPU's MCA area.  */
+extern unsigned long __per_cpu_mca[NR_CPUS];
+
+extern int cpe_vector;
+extern int ia64_cpe_irq;
+extern void ia64_mca_init(void);
+extern void ia64_mca_cpu_init(void *);
+extern void ia64_os_mca_dispatch(void);
+extern void ia64_os_mca_dispatch_end(void);
+extern void ia64_mca_ucmc_handler(struct pt_regs *, struct ia64_sal_os_state *);
+extern void ia64_init_handler(struct pt_regs *,
+			      struct switch_stack *,
+			      struct ia64_sal_os_state *);
+extern void ia64_monarch_init_handler(void);
+extern void ia64_slave_init_handler(void);
+extern void ia64_mca_cmc_vector_setup(void);
+extern int  ia64_reg_MCA_extension(int (*fn)(void *, struct ia64_sal_os_state *));
+extern void ia64_unreg_MCA_extension(void);
+extern u64 ia64_get_rnat(u64 *);
+extern void ia64_mca_printk(const char * fmt, ...)
+	 __attribute__ ((format (printf, 1, 2)));
+
+struct ia64_mca_notify_die {
+	struct ia64_sal_os_state *sos;
+	int *monarch_cpu;
+	int *data;
+};
+
+DECLARE_PER_CPU(u64, ia64_mca_pal_base);
+
+#else	/* __ASSEMBLY__ */
+
+#define IA64_MCA_CORRECTED	0x0	/* Error has been corrected by OS_MCA */
+#define IA64_MCA_WARM_BOOT	-1	/* Warm boot of the system need from SAL */
+#define IA64_MCA_COLD_BOOT	-2	/* Cold boot of the system need from SAL */
+#define IA64_MCA_HALT		-3	/* System to be halted by SAL */
+
+#define IA64_INIT_RESUME	0x0	/* Resume after return from INIT */
+#define IA64_INIT_WARM_BOOT	-1	/* Warm boot of the system need from SAL */
+
+#define IA64_MCA_SAME_CONTEXT	0x0	/* SAL to return to same context */
+#define IA64_MCA_NEW_CONTEXT	-1	/* SAL to return to new context */
+
+#endif /* !__ASSEMBLY__ */
+#endif /* _ASM_IA64_MCA_H */
diff --git a/arch/ia64/include/asm/mca_asm.h b/arch/ia64/include/asm/mca_asm.h
new file mode 100644
index 000000000000..dd2a5b134390
--- /dev/null
+++ b/arch/ia64/include/asm/mca_asm.h
@@ -0,0 +1,242 @@
+/*
+ * File:	mca_asm.h
+ * Purpose:	Machine check handling specific defines
+ *
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ * Copyright (C) Vijay Chander <vijay@engr.sgi.com>
+ * Copyright (C) Srinivasa Thirumalachar <sprasad@engr.sgi.com>
+ * Copyright (C) 2000 Hewlett-Packard Co.
+ * Copyright (C) 2000 David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 2002 Intel Corp.
+ * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
+ * Copyright (C) 2005 Silicon Graphics, Inc
+ * Copyright (C) 2005 Keith Owens <kaos@sgi.com>
+ */
+#ifndef _ASM_IA64_MCA_ASM_H
+#define _ASM_IA64_MCA_ASM_H
+
+#define PSR_IC		13
+#define PSR_I		14
+#define	PSR_DT		17
+#define PSR_RT		27
+#define PSR_MC		35
+#define PSR_IT		36
+#define PSR_BN		44
+
+/*
+ * This macro converts a instruction virtual address to a physical address
+ * Right now for simulation purposes the virtual addresses are
+ * direct mapped to physical addresses.
+ *	1. Lop off bits 61 thru 63 in the virtual address
+ */
+#define INST_VA_TO_PA(addr)							\
+	dep	addr	= 0, addr, 61, 3
+/*
+ * This macro converts a data virtual address to a physical address
+ * Right now for simulation purposes the virtual addresses are
+ * direct mapped to physical addresses.
+ *	1. Lop off bits 61 thru 63 in the virtual address
+ */
+#define DATA_VA_TO_PA(addr)							\
+	tpa	addr	= addr
+/*
+ * This macro converts a data physical address to a virtual address
+ * Right now for simulation purposes the virtual addresses are
+ * direct mapped to physical addresses.
+ *	1. Put 0x7 in bits 61 thru 63.
+ */
+#define DATA_PA_TO_VA(addr,temp)							\
+	mov	temp	= 0x7	;;							\
+	dep	addr	= temp, addr, 61, 3
+
+#define GET_THIS_PADDR(reg, var)		\
+	mov	reg = IA64_KR(PER_CPU_DATA);;	\
+        addl	reg = THIS_CPU(var), reg
+
+/*
+ * This macro jumps to the instruction at the given virtual address
+ * and starts execution in physical mode with all the address
+ * translations turned off.
+ *	1.	Save the current psr
+ *	2.	Make sure that all the upper 32 bits are off
+ *
+ *	3.	Clear the interrupt enable and interrupt state collection bits
+ *		in the psr before updating the ipsr and iip.
+ *
+ *	4.	Turn off the instruction, data and rse translation bits of the psr
+ *		and store the new value into ipsr
+ *		Also make sure that the interrupts are disabled.
+ *		Ensure that we are in little endian mode.
+ *		[psr.{rt, it, dt, i, be} = 0]
+ *
+ *	5.	Get the physical address corresponding to the virtual address
+ *		of the next instruction bundle and put it in iip.
+ *		(Using magic numbers 24 and 40 in the deposint instruction since
+ *		 the IA64_SDK code directly maps to lower 24bits as physical address
+ *		 from a virtual address).
+ *
+ *	6.	Do an rfi to move the values from ipsr to psr and iip to ip.
+ */
+#define  PHYSICAL_MODE_ENTER(temp1, temp2, start_addr, old_psr)				\
+	mov	old_psr = psr;								\
+	;;										\
+	dep	old_psr = 0, old_psr, 32, 32;						\
+											\
+	mov	ar.rsc = 0 ;								\
+	;;										\
+	srlz.d;										\
+	mov	temp2 = ar.bspstore;							\
+	;;										\
+	DATA_VA_TO_PA(temp2);								\
+	;;										\
+	mov	temp1 = ar.rnat;							\
+	;;										\
+	mov	ar.bspstore = temp2;							\
+	;;										\
+	mov	ar.rnat = temp1;							\
+	mov	temp1 = psr;								\
+	mov	temp2 = psr;								\
+	;;										\
+											\
+	dep	temp2 = 0, temp2, PSR_IC, 2;						\
+	;;										\
+	mov	psr.l = temp2;								\
+	;;										\
+	srlz.d;										\
+	dep	temp1 = 0, temp1, 32, 32;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_IT, 1;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_DT, 1;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_RT, 1;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_I, 1;						\
+	;;										\
+	dep	temp1 = 0, temp1, PSR_IC, 1;						\
+	;;										\
+	dep	temp1 = -1, temp1, PSR_MC, 1;						\
+	;;										\
+	mov	cr.ipsr = temp1;							\
+	;;										\
+	LOAD_PHYSICAL(p0, temp2, start_addr);						\
+	;;										\
+	mov	cr.iip = temp2;								\
+	mov	cr.ifs = r0;								\
+	DATA_VA_TO_PA(sp);								\
+	DATA_VA_TO_PA(gp);								\
+	;;										\
+	srlz.i;										\
+	;;										\
+	nop	1;									\
+	nop	2;									\
+	nop	1;									\
+	nop	2;									\
+	rfi;										\
+	;;
+
+/*
+ * This macro jumps to the instruction at the given virtual address
+ * and starts execution in virtual mode with all the address
+ * translations turned on.
+ *	1.	Get the old saved psr
+ *
+ *	2.	Clear the interrupt state collection bit in the current psr.
+ *
+ *	3.	Set the instruction translation bit back in the old psr
+ *		Note we have to do this since we are right now saving only the
+ *		lower 32-bits of old psr.(Also the old psr has the data and
+ *		rse translation bits on)
+ *
+ *	4.	Set ipsr to this old_psr with "it" bit set and "bn" = 1.
+ *
+ *	5.	Reset the current thread pointer (r13).
+ *
+ *	6.	Set iip to the virtual address of the next instruction bundle.
+ *
+ *	7.	Do an rfi to move ipsr to psr and iip to ip.
+ */
+
+#define VIRTUAL_MODE_ENTER(temp1, temp2, start_addr, old_psr)	\
+	mov	temp2 = psr;					\
+	;;							\
+	mov	old_psr = temp2;				\
+	;;							\
+	dep	temp2 = 0, temp2, PSR_IC, 2;			\
+	;;							\
+	mov	psr.l = temp2;					\
+	mov	ar.rsc = 0;					\
+	;;							\
+	srlz.d;							\
+	mov	r13 = ar.k6;					\
+	mov	temp2 = ar.bspstore;				\
+	;;							\
+	DATA_PA_TO_VA(temp2,temp1);				\
+	;;							\
+	mov	temp1 = ar.rnat;				\
+	;;							\
+	mov	ar.bspstore = temp2;				\
+	;;							\
+	mov	ar.rnat = temp1;				\
+	;;							\
+	mov	temp1 = old_psr;				\
+	;;							\
+	mov	temp2 = 1;					\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_IC, 1;		\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_IT, 1;		\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_DT, 1;		\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_RT, 1;		\
+	;;							\
+	dep	temp1 = temp2, temp1, PSR_BN, 1;		\
+	;;							\
+								\
+	mov     cr.ipsr = temp1;				\
+	movl	temp2 = start_addr;				\
+	;;							\
+	mov	cr.iip = temp2;					\
+	movl	gp = __gp					\
+	;;							\
+	DATA_PA_TO_VA(sp, temp1);				\
+	srlz.i;							\
+	;;							\
+	nop	1;						\
+	nop	2;						\
+	nop	1;						\
+	rfi							\
+	;;
+
+/*
+ * The MCA and INIT stacks in struct ia64_mca_cpu look like normal kernel
+ * stacks, except that the SAL/OS state and a switch_stack are stored near the
+ * top of the MCA/INIT stack.  To support concurrent entry to MCA or INIT, as
+ * well as MCA over INIT, each event needs its own SAL/OS state.  All entries
+ * are 16 byte aligned.
+ *
+ *      +---------------------------+
+ *      |          pt_regs          |
+ *      +---------------------------+
+ *      |        switch_stack       |
+ *      +---------------------------+
+ *      |        SAL/OS state       |
+ *      +---------------------------+
+ *      |    16 byte scratch area   |
+ *      +---------------------------+ <-------- SP at start of C MCA handler
+ *      |           .....           |
+ *      +---------------------------+
+ *      | RBS for MCA/INIT handler  |
+ *      +---------------------------+
+ *      | struct task for MCA/INIT  |
+ *      +---------------------------+ <-------- Bottom of MCA/INIT stack
+ */
+
+#define ALIGN16(x)			((x)&~15)
+#define MCA_PT_REGS_OFFSET		ALIGN16(KERNEL_STACK_SIZE-IA64_PT_REGS_SIZE)
+#define MCA_SWITCH_STACK_OFFSET		ALIGN16(MCA_PT_REGS_OFFSET-IA64_SWITCH_STACK_SIZE)
+#define MCA_SOS_OFFSET			ALIGN16(MCA_SWITCH_STACK_OFFSET-IA64_SAL_OS_STATE_SIZE)
+#define MCA_SP_OFFSET			ALIGN16(MCA_SOS_OFFSET-16)
+
+#endif /* _ASM_IA64_MCA_ASM_H */
diff --git a/arch/ia64/include/asm/meminit.h b/arch/ia64/include/asm/meminit.h
new file mode 100644
index 000000000000..7245a5781594
--- /dev/null
+++ b/arch/ia64/include/asm/meminit.h
@@ -0,0 +1,75 @@
+#ifndef meminit_h
+#define meminit_h
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+
+/*
+ * Entries defined so far:
+ * 	- boot param structure itself
+ * 	- memory map
+ * 	- initrd (optional)
+ * 	- command line string
+ * 	- kernel code & data
+ * 	- crash dumping code reserved region
+ * 	- Kernel memory map built from EFI memory map
+ * 	- ELF core header
+ *
+ * More could be added if necessary
+ */
+#define IA64_MAX_RSVD_REGIONS 8
+
+struct rsvd_region {
+	unsigned long start;	/* virtual address of beginning of element */
+	unsigned long end;	/* virtual address of end of element + 1 */
+};
+
+extern struct rsvd_region rsvd_region[IA64_MAX_RSVD_REGIONS + 1];
+extern int num_rsvd_regions;
+
+extern void find_memory (void);
+extern void reserve_memory (void);
+extern void find_initrd (void);
+extern int filter_rsvd_memory (unsigned long start, unsigned long end, void *arg);
+extern int filter_memory (unsigned long start, unsigned long end, void *arg);
+extern unsigned long efi_memmap_init(unsigned long *s, unsigned long *e);
+extern int find_max_min_low_pfn (unsigned long , unsigned long, void *);
+
+extern unsigned long vmcore_find_descriptor_size(unsigned long address);
+extern int reserve_elfcorehdr(unsigned long *start, unsigned long *end);
+
+/*
+ * For rounding an address to the next IA64_GRANULE_SIZE or order
+ */
+#define GRANULEROUNDDOWN(n)	((n) & ~(IA64_GRANULE_SIZE-1))
+#define GRANULEROUNDUP(n)	(((n)+IA64_GRANULE_SIZE-1) & ~(IA64_GRANULE_SIZE-1))
+#define ORDERROUNDDOWN(n)	((n) & ~((PAGE_SIZE<<MAX_ORDER)-1))
+
+#ifdef CONFIG_NUMA
+  extern void call_pernode_memory (unsigned long start, unsigned long len, void *func);
+#else
+# define call_pernode_memory(start, len, func)	(*func)(start, len, 0)
+#endif
+
+#define IGNORE_PFN0	1	/* XXX fix me: ignore pfn 0 until TLB miss handler is updated... */
+
+extern int register_active_ranges(u64 start, u64 len, int nid);
+
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+# define LARGE_GAP	0x40000000 /* Use virtual mem map if hole is > than this */
+  extern unsigned long vmalloc_end;
+  extern struct page *vmem_map;
+  extern int find_largest_hole (u64 start, u64 end, void *arg);
+  extern int create_mem_map_page_table (u64 start, u64 end, void *arg);
+  extern int vmemmap_find_next_valid_pfn(int, int);
+#else
+static inline int vmemmap_find_next_valid_pfn(int node, int i)
+{
+	return i + 1;
+}
+#endif
+#endif /* meminit_h */
diff --git a/arch/ia64/include/asm/mman.h b/arch/ia64/include/asm/mman.h
new file mode 100644
index 000000000000..c73b87832a1e
--- /dev/null
+++ b/arch/ia64/include/asm/mman.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_IA64_MMAN_H
+#define _ASM_IA64_MMAN_H
+
+/*
+ * Based on <asm-i386/mman.h>.
+ *
+ * Modified 1998-2000, 2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN	0x00100		/* stack-like segment */
+#define MAP_GROWSUP	0x00200		/* register stack-like segment */
+#define MAP_DENYWRITE	0x00800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x01000		/* mark it as an executable */
+#define MAP_LOCKED	0x02000		/* pages are locked */
+#define MAP_NORESERVE	0x04000		/* don't check for reservations */
+#define MAP_POPULATE	0x08000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#define arch_mmap_check	ia64_mmap_check
+int ia64_mmap_check(unsigned long addr, unsigned long len,
+		unsigned long flags);
+#endif
+#endif
+
+#endif /* _ASM_IA64_MMAN_H */
diff --git a/arch/ia64/include/asm/mmu.h b/arch/ia64/include/asm/mmu.h
new file mode 100644
index 000000000000..611432ba579c
--- /dev/null
+++ b/arch/ia64/include/asm/mmu.h
@@ -0,0 +1,13 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/*
+ * Type for a context number.  We declare it volatile to ensure proper
+ * ordering when it's accessed outside of spinlock'd critical sections
+ * (e.g., as done in activate_mm() and init_new_context()).
+ */
+typedef volatile unsigned long mm_context_t;
+
+typedef unsigned long nv_mm_context_t;
+
+#endif
diff --git a/arch/ia64/include/asm/mmu_context.h b/arch/ia64/include/asm/mmu_context.h
new file mode 100644
index 000000000000..040bc87db930
--- /dev/null
+++ b/arch/ia64/include/asm/mmu_context.h
@@ -0,0 +1,198 @@
+#ifndef _ASM_IA64_MMU_CONTEXT_H
+#define _ASM_IA64_MMU_CONTEXT_H
+
+/*
+ * Copyright (C) 1998-2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+/*
+ * Routines to manage the allocation of task context numbers.  Task context
+ * numbers are used to reduce or eliminate the need to perform TLB flushes
+ * due to context switches.  Context numbers are implemented using ia-64
+ * region ids.  Since the IA-64 TLB does not consider the region number when
+ * performing a TLB lookup, we need to assign a unique region id to each
+ * region in a process.  We use the least significant three bits in aregion
+ * id for this purpose.
+ */
+
+#define IA64_REGION_ID_KERNEL	0 /* the kernel's region id (tlb.c depends on this being 0) */
+
+#define ia64_rid(ctx,addr)	(((ctx) << 3) | (addr >> 61))
+
+# include <asm/page.h>
+# ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <linux/percpu.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+
+#include <asm/processor.h>
+#include <asm-generic/mm_hooks.h>
+
+struct ia64_ctx {
+	spinlock_t lock;
+	unsigned int next;	/* next context number to use */
+	unsigned int limit;     /* available free range */
+	unsigned int max_ctx;   /* max. context value supported by all CPUs */
+				/* call wrap_mmu_context when next >= max */
+	unsigned long *bitmap;  /* bitmap size is max_ctx+1 */
+	unsigned long *flushmap;/* pending rid to be flushed */
+};
+
+extern struct ia64_ctx ia64_ctx;
+DECLARE_PER_CPU(u8, ia64_need_tlb_flush);
+
+extern void mmu_context_init (void);
+extern void wrap_mmu_context (struct mm_struct *mm);
+
+static inline void
+enter_lazy_tlb (struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * When the context counter wraps around all TLBs need to be flushed because
+ * an old context number might have been reused. This is signalled by the
+ * ia64_need_tlb_flush per-CPU variable, which is checked in the routine
+ * below. Called by activate_mm(). <efocht@ess.nec.de>
+ */
+static inline void
+delayed_tlb_flush (void)
+{
+	extern void local_flush_tlb_all (void);
+	unsigned long flags;
+
+	if (unlikely(__ia64_per_cpu_var(ia64_need_tlb_flush))) {
+		spin_lock_irqsave(&ia64_ctx.lock, flags);
+		if (__ia64_per_cpu_var(ia64_need_tlb_flush)) {
+			local_flush_tlb_all();
+			__ia64_per_cpu_var(ia64_need_tlb_flush) = 0;
+		}
+		spin_unlock_irqrestore(&ia64_ctx.lock, flags);
+	}
+}
+
+static inline nv_mm_context_t
+get_mmu_context (struct mm_struct *mm)
+{
+	unsigned long flags;
+	nv_mm_context_t context = mm->context;
+
+	if (likely(context))
+		goto out;
+
+	spin_lock_irqsave(&ia64_ctx.lock, flags);
+	/* re-check, now that we've got the lock: */
+	context = mm->context;
+	if (context == 0) {
+		cpus_clear(mm->cpu_vm_mask);
+		if (ia64_ctx.next >= ia64_ctx.limit) {
+			ia64_ctx.next = find_next_zero_bit(ia64_ctx.bitmap,
+					ia64_ctx.max_ctx, ia64_ctx.next);
+			ia64_ctx.limit = find_next_bit(ia64_ctx.bitmap,
+					ia64_ctx.max_ctx, ia64_ctx.next);
+			if (ia64_ctx.next >= ia64_ctx.max_ctx)
+				wrap_mmu_context(mm);
+		}
+		mm->context = context = ia64_ctx.next++;
+		__set_bit(context, ia64_ctx.bitmap);
+	}
+	spin_unlock_irqrestore(&ia64_ctx.lock, flags);
+out:
+	/*
+	 * Ensure we're not starting to use "context" before any old
+	 * uses of it are gone from our TLB.
+	 */
+	delayed_tlb_flush();
+
+	return context;
+}
+
+/*
+ * Initialize context number to some sane value.  MM is guaranteed to be a
+ * brand-new address-space, so no TLB flushing is needed, ever.
+ */
+static inline int
+init_new_context (struct task_struct *p, struct mm_struct *mm)
+{
+	mm->context = 0;
+	return 0;
+}
+
+static inline void
+destroy_context (struct mm_struct *mm)
+{
+	/* Nothing to do.  */
+}
+
+static inline void
+reload_context (nv_mm_context_t context)
+{
+	unsigned long rid;
+	unsigned long rid_incr = 0;
+	unsigned long rr0, rr1, rr2, rr3, rr4, old_rr4;
+
+	old_rr4 = ia64_get_rr(RGN_BASE(RGN_HPAGE));
+	rid = context << 3;	/* make space for encoding the region number */
+	rid_incr = 1 << 8;
+
+	/* encode the region id, preferred page size, and VHPT enable bit: */
+	rr0 = (rid << 8) | (PAGE_SHIFT << 2) | 1;
+	rr1 = rr0 + 1*rid_incr;
+	rr2 = rr0 + 2*rid_incr;
+	rr3 = rr0 + 3*rid_incr;
+	rr4 = rr0 + 4*rid_incr;
+#ifdef  CONFIG_HUGETLB_PAGE
+	rr4 = (rr4 & (~(0xfcUL))) | (old_rr4 & 0xfc);
+
+#  if RGN_HPAGE != 4
+#    error "reload_context assumes RGN_HPAGE is 4"
+#  endif
+#endif
+
+	ia64_set_rr0_to_rr4(rr0, rr1, rr2, rr3, rr4);
+	ia64_srlz_i();			/* srlz.i implies srlz.d */
+}
+
+/*
+ * Must be called with preemption off
+ */
+static inline void
+activate_context (struct mm_struct *mm)
+{
+	nv_mm_context_t context;
+
+	do {
+		context = get_mmu_context(mm);
+		if (!cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+			cpu_set(smp_processor_id(), mm->cpu_vm_mask);
+		reload_context(context);
+		/*
+		 * in the unlikely event of a TLB-flush by another thread,
+		 * redo the load.
+		 */
+	} while (unlikely(context != mm->context));
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/*
+ * Switch from address space PREV to address space NEXT.
+ */
+static inline void
+activate_mm (struct mm_struct *prev, struct mm_struct *next)
+{
+	/*
+	 * We may get interrupts here, but that's OK because interrupt
+	 * handlers cannot touch user-space.
+	 */
+	ia64_set_kr(IA64_KR_PT_BASE, __pa(next->pgd));
+	activate_context(next);
+}
+
+#define switch_mm(prev_mm,next_mm,next_task)	activate_mm(prev_mm, next_mm)
+
+# endif /* ! __ASSEMBLY__ */
+#endif /* _ASM_IA64_MMU_CONTEXT_H */
diff --git a/arch/ia64/include/asm/mmzone.h b/arch/ia64/include/asm/mmzone.h
new file mode 100644
index 000000000000..34efe88eb849
--- /dev/null
+++ b/arch/ia64/include/asm/mmzone.h
@@ -0,0 +1,50 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000,2003 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (c) 2002 NEC Corp.
+ * Copyright (c) 2002 Erich Focht <efocht@ess.nec.de>
+ * Copyright (c) 2002 Kimio Suganuma <k-suganuma@da.jp.nec.com>
+ */
+#ifndef _ASM_IA64_MMZONE_H
+#define _ASM_IA64_MMZONE_H
+
+#include <linux/numa.h>
+#include <asm/page.h>
+#include <asm/meminit.h>
+
+#ifdef CONFIG_NUMA
+
+static inline int pfn_to_nid(unsigned long pfn)
+{
+#ifdef CONFIG_NUMA
+	extern int paddr_to_nid(unsigned long);
+	int nid = paddr_to_nid(pfn << PAGE_SHIFT);
+	if (nid < 0)
+		return 0;
+	else
+		return nid;
+#else
+	return 0;
+#endif
+}
+
+#ifdef CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID
+extern int early_pfn_to_nid(unsigned long pfn);
+#endif
+
+#ifdef CONFIG_IA64_DIG /* DIG systems are small */
+# define MAX_PHYSNODE_ID	8
+# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 8)
+#else /* sn2 is the biggest case, so we use that if !DIG */
+# define MAX_PHYSNODE_ID	2048
+# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 4)
+#endif
+
+#else /* CONFIG_NUMA */
+# define NR_NODE_MEMBLKS	(MAX_NUMNODES * 4)
+#endif /* CONFIG_NUMA */
+
+#endif /* _ASM_IA64_MMZONE_H */
diff --git a/arch/ia64/include/asm/module.h b/arch/ia64/include/asm/module.h
new file mode 100644
index 000000000000..d2da61e4c49b
--- /dev/null
+++ b/arch/ia64/include/asm/module.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_IA64_MODULE_H
+#define _ASM_IA64_MODULE_H
+
+/*
+ * IA-64-specific support for kernel module loader.
+ *
+ * Copyright (C) 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+struct elf64_shdr;			/* forward declration */
+
+struct mod_arch_specific {
+	struct elf64_shdr *core_plt;	/* core PLT section */
+	struct elf64_shdr *init_plt;	/* init PLT section */
+	struct elf64_shdr *got;		/* global offset table */
+	struct elf64_shdr *opd;		/* official procedure descriptors */
+	struct elf64_shdr *unwind;	/* unwind-table section */
+	unsigned long gp;		/* global-pointer for module */
+
+	void *core_unw_table;		/* core unwind-table cookie returned by unwinder */
+	void *init_unw_table;		/* init unwind-table cookie returned by unwinder */
+	unsigned int next_got_entry;	/* index of next available got entry */
+};
+
+#define Elf_Shdr	Elf64_Shdr
+#define Elf_Sym		Elf64_Sym
+#define Elf_Ehdr	Elf64_Ehdr
+
+#define MODULE_PROC_FAMILY	"ia64"
+#define MODULE_ARCH_VERMAGIC	MODULE_PROC_FAMILY \
+	"gcc-" __stringify(__GNUC__) "." __stringify(__GNUC_MINOR__)
+
+#define ARCH_SHF_SMALL	SHF_IA_64_SHORT
+
+#endif /* _ASM_IA64_MODULE_H */
diff --git a/arch/ia64/include/asm/msgbuf.h b/arch/ia64/include/asm/msgbuf.h
new file mode 100644
index 000000000000..6c64c0d2aae1
--- /dev/null
+++ b/arch/ia64/include/asm/msgbuf.h
@@ -0,0 +1,27 @@
+#ifndef _ASM_IA64_MSGBUF_H
+#define _ASM_IA64_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused1;
+	unsigned long  __unused2;
+};
+
+#endif /* _ASM_IA64_MSGBUF_H */
diff --git a/arch/ia64/include/asm/mutex.h b/arch/ia64/include/asm/mutex.h
new file mode 100644
index 000000000000..bed73a643a56
--- /dev/null
+++ b/arch/ia64/include/asm/mutex.h
@@ -0,0 +1,92 @@
+/*
+ * ia64 implementation of the mutex fastpath.
+ *
+ * Copyright (C) 2006 Ken Chen <kenneth.w.chen@intel.com>
+ *
+ */
+
+#ifndef _ASM_MUTEX_H
+#define _ASM_MUTEX_H
+
+/**
+ *  __mutex_fastpath_lock - try to take the lock by moving the count
+ *                          from 1 to a 0 value
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call <fail_fn> if
+ * it wasn't 1 originally. This function MUST leave the value lower than
+ * 1 even when the "1" assertion wasn't true.
+ */
+static inline void
+__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+	if (unlikely(ia64_fetchadd4_acq(count, -1) != 1))
+		fail_fn(count);
+}
+
+/**
+ *  __mutex_fastpath_lock_retval - try to take the lock by moving the count
+ *                                 from 1 to a 0 value
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call <fail_fn> if
+ * it wasn't 1 originally. This function returns 0 if the fastpath succeeds,
+ * or anything the slow path function returns.
+ */
+static inline int
+__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+	if (unlikely(ia64_fetchadd4_acq(count, -1) != 1))
+		return fail_fn(count);
+	return 0;
+}
+
+/**
+ *  __mutex_fastpath_unlock - try to promote the count from 0 to 1
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: function to call if the original value was not 0
+ *
+ * Try to promote the count from 0 to 1. If it wasn't 0, call <fail_fn>.
+ * In the failure case, this function is allowed to either set the value to
+ * 1, or to set it to a value lower than 1.
+ *
+ * If the implementation sets it to a value of lower than 1, then the
+ * __mutex_slowpath_needs_to_unlock() macro needs to return 1, it needs
+ * to return 0 otherwise.
+ */
+static inline void
+__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+	int ret = ia64_fetchadd4_rel(count, 1);
+	if (unlikely(ret < 0))
+		fail_fn(count);
+}
+
+#define __mutex_slowpath_needs_to_unlock()		1
+
+/**
+ * __mutex_fastpath_trylock - try to acquire the mutex, without waiting
+ *
+ *  @count: pointer of type atomic_t
+ *  @fail_fn: fallback function
+ *
+ * Change the count from 1 to a value lower than 1, and return 0 (failure)
+ * if it wasn't 1 originally, or return 1 (success) otherwise. This function
+ * MUST leave the value lower than 1 even when the "1" assertion wasn't true.
+ * Additionally, if the value was < 0 originally, this function must not leave
+ * it to 0 on failure.
+ *
+ * If the architecture has no effective trylock variant, it should call the
+ * <fail_fn> spinlock-based trylock variant unconditionally.
+ */
+static inline int
+__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+	if (cmpxchg_acq(count, 1, 0) == 1)
+		return 1;
+	return 0;
+}
+
+#endif
diff --git a/arch/ia64/include/asm/native/inst.h b/arch/ia64/include/asm/native/inst.h
new file mode 100644
index 000000000000..c8efbf7b849e
--- /dev/null
+++ b/arch/ia64/include/asm/native/inst.h
@@ -0,0 +1,175 @@
+/******************************************************************************
+ * arch/ia64/include/asm/native/inst.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define DO_SAVE_MIN		IA64_NATIVE_DO_SAVE_MIN
+
+#define __paravirt_switch_to			ia64_native_switch_to
+#define __paravirt_leave_syscall		ia64_native_leave_syscall
+#define __paravirt_work_processed_syscall	ia64_native_work_processed_syscall
+#define __paravirt_leave_kernel			ia64_native_leave_kernel
+#define __paravirt_pending_syscall_end		ia64_work_pending_syscall_end
+#define __paravirt_work_processed_syscall_target \
+						ia64_work_processed_syscall
+
+#ifdef CONFIG_PARAVIRT_GUEST_ASM_CLOBBER_CHECK
+# define PARAVIRT_POISON	0xdeadbeefbaadf00d
+# define CLOBBER(clob)				\
+	;;					\
+	movl clob = PARAVIRT_POISON;		\
+	;;
+#else
+# define CLOBBER(clob)		/* nothing */
+#endif
+
+#define MOV_FROM_IFA(reg)	\
+	mov reg = cr.ifa
+
+#define MOV_FROM_ITIR(reg)	\
+	mov reg = cr.itir
+
+#define MOV_FROM_ISR(reg)	\
+	mov reg = cr.isr
+
+#define MOV_FROM_IHA(reg)	\
+	mov reg = cr.iha
+
+#define MOV_FROM_IPSR(pred, reg)	\
+(pred)	mov reg = cr.ipsr
+
+#define MOV_FROM_IIM(reg)	\
+	mov reg = cr.iim
+
+#define MOV_FROM_IIP(reg)	\
+	mov reg = cr.iip
+
+#define MOV_FROM_IVR(reg, clob)	\
+	mov reg = cr.ivr	\
+	CLOBBER(clob)
+
+#define MOV_FROM_PSR(pred, reg, clob)	\
+(pred)	mov reg = psr			\
+	CLOBBER(clob)
+
+#define MOV_TO_IFA(reg, clob)	\
+	mov cr.ifa = reg	\
+	CLOBBER(clob)
+
+#define MOV_TO_ITIR(pred, reg, clob)	\
+(pred)	mov cr.itir = reg		\
+	CLOBBER(clob)
+
+#define MOV_TO_IHA(pred, reg, clob)	\
+(pred)	mov cr.iha = reg		\
+	CLOBBER(clob)
+
+#define MOV_TO_IPSR(pred, reg, clob)		\
+(pred)	mov cr.ipsr = reg			\
+	CLOBBER(clob)
+
+#define MOV_TO_IFS(pred, reg, clob)	\
+(pred)	mov cr.ifs = reg		\
+	CLOBBER(clob)
+
+#define MOV_TO_IIP(reg, clob)	\
+	mov cr.iip = reg	\
+	CLOBBER(clob)
+
+#define MOV_TO_KR(kr, reg, clob0, clob1)	\
+	mov IA64_KR(kr) = reg			\
+	CLOBBER(clob0)				\
+	CLOBBER(clob1)
+
+#define ITC_I(pred, reg, clob)	\
+(pred)	itc.i reg		\
+	CLOBBER(clob)
+
+#define ITC_D(pred, reg, clob)	\
+(pred)	itc.d reg		\
+	CLOBBER(clob)
+
+#define ITC_I_AND_D(pred_i, pred_d, reg, clob)	\
+(pred_i) itc.i reg;				\
+(pred_d) itc.d reg				\
+	CLOBBER(clob)
+
+#define THASH(pred, reg0, reg1, clob)		\
+(pred)	thash reg0 = reg1			\
+	CLOBBER(clob)
+
+#define SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(clob0, clob1)		\
+	ssm psr.ic | PSR_DEFAULT_BITS					\
+	CLOBBER(clob0)							\
+	CLOBBER(clob1)							\
+	;;								\
+	srlz.i /* guarantee that interruption collectin is on */	\
+	;;
+
+#define SSM_PSR_IC_AND_SRLZ_D(clob0, clob1)	\
+	ssm psr.ic				\
+	CLOBBER(clob0)				\
+	CLOBBER(clob1)				\
+	;;					\
+	srlz.d
+
+#define RSM_PSR_IC(clob)	\
+	rsm psr.ic		\
+	CLOBBER(clob)
+
+#define SSM_PSR_I(pred, pred_clob, clob)	\
+(pred)	ssm psr.i				\
+	CLOBBER(clob)
+
+#define RSM_PSR_I(pred, clob0, clob1)	\
+(pred)	rsm psr.i			\
+	CLOBBER(clob0)			\
+	CLOBBER(clob1)
+
+#define RSM_PSR_I_IC(clob0, clob1, clob2)	\
+	rsm psr.i | psr.ic			\
+	CLOBBER(clob0)				\
+	CLOBBER(clob1)				\
+	CLOBBER(clob2)
+
+#define RSM_PSR_DT		\
+	rsm psr.dt
+
+#define SSM_PSR_DT_AND_SRLZ_I	\
+	ssm psr.dt		\
+	;;			\
+	srlz.i
+
+#define BSW_0(clob0, clob1, clob2)	\
+	bsw.0				\
+	CLOBBER(clob0)			\
+	CLOBBER(clob1)			\
+	CLOBBER(clob2)
+
+#define BSW_1(clob0, clob1)	\
+	bsw.1			\
+	CLOBBER(clob0)		\
+	CLOBBER(clob1)
+
+#define COVER	\
+	cover
+
+#define RFI	\
+	rfi
diff --git a/arch/ia64/include/asm/native/irq.h b/arch/ia64/include/asm/native/irq.h
new file mode 100644
index 000000000000..887a228e2edb
--- /dev/null
+++ b/arch/ia64/include/asm/native/irq.h
@@ -0,0 +1,33 @@
+/******************************************************************************
+ * arch/ia64/include/asm/native/irq.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _ASM_IA64_NATIVE_IRQ_H
+#define _ASM_IA64_NATIVE_IRQ_H
+
+#define NR_VECTORS	256
+
+#if (NR_VECTORS + 32 * NR_CPUS) < 1024
+#define IA64_NATIVE_NR_IRQS (NR_VECTORS + 32 * NR_CPUS)
+#else
+#define IA64_NATIVE_NR_IRQS 1024
+#endif
+
+#endif /* _ASM_IA64_NATIVE_IRQ_H */
diff --git a/arch/ia64/include/asm/nodedata.h b/arch/ia64/include/asm/nodedata.h
new file mode 100644
index 000000000000..2fb337b0e9b7
--- /dev/null
+++ b/arch/ia64/include/asm/nodedata.h
@@ -0,0 +1,63 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (c) 2002 NEC Corp.
+ * Copyright (c) 2002 Erich Focht <efocht@ess.nec.de>
+ * Copyright (c) 2002 Kimio Suganuma <k-suganuma@da.jp.nec.com>
+ */
+#ifndef _ASM_IA64_NODEDATA_H
+#define _ASM_IA64_NODEDATA_H
+
+#include <linux/numa.h>
+
+#include <asm/percpu.h>
+#include <asm/mmzone.h>
+
+#ifdef CONFIG_NUMA
+
+/*
+ * Node Data. One of these structures is located on each node of a NUMA system.
+ */
+
+struct pglist_data;
+struct ia64_node_data {
+	short			active_cpu_count;
+	short			node;
+	struct pglist_data	*pg_data_ptrs[MAX_NUMNODES];
+};
+
+
+/*
+ * Return a pointer to the node_data structure for the executing cpu.
+ */
+#define local_node_data		(local_cpu_data->node_data)
+
+/*
+ * Given a node id, return a pointer to the pg_data_t for the node.
+ *
+ * NODE_DATA 	- should be used in all code not related to system
+ *		  initialization. It uses pernode data structures to minimize
+ *		  offnode memory references. However, these structure are not 
+ *		  present during boot. This macro can be used once cpu_init
+ *		  completes.
+ */
+#define NODE_DATA(nid)		(local_node_data->pg_data_ptrs[nid])
+
+/*
+ * LOCAL_DATA_ADDR - This is to calculate the address of other node's
+ *		     "local_node_data" at hot-plug phase. The local_node_data
+ *		     is pointed by per_cpu_page. Kernel usually use it for
+ *		     just executing cpu. However, when new node is hot-added,
+ *		     the addresses of local data for other nodes are necessary
+ *		     to update all of them.
+ */
+#define LOCAL_DATA_ADDR(pgdat)  			\
+	((struct ia64_node_data *)((u64)(pgdat) + 	\
+				   L1_CACHE_ALIGN(sizeof(struct pglist_data))))
+
+#endif /* CONFIG_NUMA */
+
+#endif /* _ASM_IA64_NODEDATA_H */
diff --git a/arch/ia64/include/asm/numa.h b/arch/ia64/include/asm/numa.h
new file mode 100644
index 000000000000..3499ff57bf42
--- /dev/null
+++ b/arch/ia64/include/asm/numa.h
@@ -0,0 +1,82 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * This file contains NUMA specific prototypes and definitions.
+ *
+ * 2002/08/05 Erich Focht <efocht@ess.nec.de>
+ *
+ */
+#ifndef _ASM_IA64_NUMA_H
+#define _ASM_IA64_NUMA_H
+
+
+#ifdef CONFIG_NUMA
+
+#include <linux/cache.h>
+#include <linux/cpumask.h>
+#include <linux/numa.h>
+#include <linux/smp.h>
+#include <linux/threads.h>
+
+#include <asm/mmzone.h>
+
+#define NUMA_NO_NODE	-1
+
+extern u16 cpu_to_node_map[NR_CPUS] __cacheline_aligned;
+extern cpumask_t node_to_cpu_mask[MAX_NUMNODES] __cacheline_aligned;
+extern pg_data_t *pgdat_list[MAX_NUMNODES];
+
+/* Stuff below this line could be architecture independent */
+
+extern int num_node_memblks;		/* total number of memory chunks */
+
+/*
+ * List of node memory chunks. Filled when parsing SRAT table to
+ * obtain information about memory nodes.
+*/
+
+struct node_memblk_s {
+	unsigned long start_paddr;
+	unsigned long size;
+	int nid;		/* which logical node contains this chunk? */
+	int bank;		/* which mem bank on this node */
+};
+
+struct node_cpuid_s {
+	u16	phys_id;	/* id << 8 | eid */
+	int	nid;		/* logical node containing this CPU */
+};
+
+extern struct node_memblk_s node_memblk[NR_NODE_MEMBLKS];
+extern struct node_cpuid_s node_cpuid[NR_CPUS];
+
+/*
+ * ACPI 2.0 SLIT (System Locality Information Table)
+ * http://devresource.hp.com/devresource/Docs/TechPapers/IA64/slit.pdf
+ *
+ * This is a matrix with "distances" between nodes, they should be
+ * proportional to the memory access latency ratios.
+ */
+
+extern u8 numa_slit[MAX_NUMNODES * MAX_NUMNODES];
+#define node_distance(from,to) (numa_slit[(from) * num_online_nodes() + (to)])
+
+extern int paddr_to_nid(unsigned long paddr);
+
+#define local_nodeid (cpu_to_node_map[smp_processor_id()])
+
+extern void map_cpu_to_node(int cpu, int nid);
+extern void unmap_cpu_from_node(int cpu, int nid);
+
+
+#else /* !CONFIG_NUMA */
+#define map_cpu_to_node(cpu, nid)	do{}while(0)
+#define unmap_cpu_from_node(cpu, nid)	do{}while(0)
+
+#define paddr_to_nid(addr)	0
+
+#endif /* CONFIG_NUMA */
+
+#endif /* _ASM_IA64_NUMA_H */
diff --git a/arch/ia64/include/asm/page.h b/arch/ia64/include/asm/page.h
new file mode 100644
index 000000000000..5f271bc712ee
--- /dev/null
+++ b/arch/ia64/include/asm/page.h
@@ -0,0 +1,223 @@
+#ifndef _ASM_IA64_PAGE_H
+#define _ASM_IA64_PAGE_H
+/*
+ * Pagetable related stuff.
+ *
+ * Copyright (C) 1998, 1999, 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/intrinsics.h>
+#include <asm/types.h>
+
+/*
+ * The top three bits of an IA64 address are its Region Number.
+ * Different regions are assigned to different purposes.
+ */
+#define RGN_SHIFT	(61)
+#define RGN_BASE(r)	(__IA64_UL_CONST(r)<<RGN_SHIFT)
+#define RGN_BITS	(RGN_BASE(-1))
+
+#define RGN_KERNEL	7	/* Identity mapped region */
+#define RGN_UNCACHED    6	/* Identity mapped I/O region */
+#define RGN_GATE	5	/* Gate page, Kernel text, etc */
+#define RGN_HPAGE	4	/* For Huge TLB pages */
+
+/*
+ * PAGE_SHIFT determines the actual kernel page size.
+ */
+#if defined(CONFIG_IA64_PAGE_SIZE_4KB)
+# define PAGE_SHIFT	12
+#elif defined(CONFIG_IA64_PAGE_SIZE_8KB)
+# define PAGE_SHIFT	13
+#elif defined(CONFIG_IA64_PAGE_SIZE_16KB)
+# define PAGE_SHIFT	14
+#elif defined(CONFIG_IA64_PAGE_SIZE_64KB)
+# define PAGE_SHIFT	16
+#else
+# error Unsupported page size!
+#endif
+
+#define PAGE_SIZE		(__IA64_UL_CONST(1) << PAGE_SHIFT)
+#define PAGE_MASK		(~(PAGE_SIZE - 1))
+
+#define PERCPU_PAGE_SHIFT	16	/* log2() of max. size of per-CPU area */
+#define PERCPU_PAGE_SIZE	(__IA64_UL_CONST(1) << PERCPU_PAGE_SHIFT)
+
+
+#ifdef CONFIG_HUGETLB_PAGE
+# define HPAGE_REGION_BASE	RGN_BASE(RGN_HPAGE)
+# define HPAGE_SHIFT		hpage_shift
+# define HPAGE_SHIFT_DEFAULT	28	/* check ia64 SDM for architecture supported size */
+# define HPAGE_SIZE		(__IA64_UL_CONST(1) << HPAGE_SHIFT)
+# define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+
+# define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+#endif /* CONFIG_HUGETLB_PAGE */
+
+#ifdef __ASSEMBLY__
+# define __pa(x)		((x) - PAGE_OFFSET)
+# define __va(x)		((x) + PAGE_OFFSET)
+#else /* !__ASSEMBLY */
+#  define STRICT_MM_TYPECHECKS
+
+extern void clear_page (void *page);
+extern void copy_page (void *to, void *from);
+
+/*
+ * clear_user_page() and copy_user_page() can't be inline functions because
+ * flush_dcache_page() can't be defined until later...
+ */
+#define clear_user_page(addr, vaddr, page)	\
+do {						\
+	clear_page(addr);			\
+	flush_dcache_page(page);		\
+} while (0)
+
+#define copy_user_page(to, from, vaddr, page)	\
+do {						\
+	copy_page((to), (from));		\
+	flush_dcache_page(page);		\
+} while (0)
+
+
+#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr)		\
+({									\
+	struct page *page = alloc_page_vma(				\
+		GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr);	\
+	if (page)							\
+ 		flush_dcache_page(page);				\
+	page;								\
+})
+
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+extern int ia64_pfn_valid (unsigned long pfn);
+#else
+# define ia64_pfn_valid(pfn) 1
+#endif
+
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+extern struct page *vmem_map;
+#ifdef CONFIG_DISCONTIGMEM
+# define page_to_pfn(page)	((unsigned long) (page - vmem_map))
+# define pfn_to_page(pfn)	(vmem_map + (pfn))
+#else
+# include <asm-generic/memory_model.h>
+#endif
+#else
+# include <asm-generic/memory_model.h>
+#endif
+
+#ifdef CONFIG_FLATMEM
+# define pfn_valid(pfn)		(((pfn) < max_mapnr) && ia64_pfn_valid(pfn))
+#elif defined(CONFIG_DISCONTIGMEM)
+extern unsigned long min_low_pfn;
+extern unsigned long max_low_pfn;
+# define pfn_valid(pfn)		(((pfn) >= min_low_pfn) && ((pfn) < max_low_pfn) && ia64_pfn_valid(pfn))
+#endif
+
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+
+typedef union ia64_va {
+	struct {
+		unsigned long off : 61;		/* intra-region offset */
+		unsigned long reg :  3;		/* region number */
+	} f;
+	unsigned long l;
+	void *p;
+} ia64_va;
+
+/*
+ * Note: These macros depend on the fact that PAGE_OFFSET has all
+ * region bits set to 1 and all other bits set to zero.  They are
+ * expressed in this way to ensure they result in a single "dep"
+ * instruction.
+ */
+#define __pa(x)		({ia64_va _v; _v.l = (long) (x); _v.f.reg = 0; _v.l;})
+#define __va(x)		({ia64_va _v; _v.l = (long) (x); _v.f.reg = -1; _v.p;})
+
+#define REGION_NUMBER(x)	({ia64_va _v; _v.l = (long) (x); _v.f.reg;})
+#define REGION_OFFSET(x)	({ia64_va _v; _v.l = (long) (x); _v.f.off;})
+
+#ifdef CONFIG_HUGETLB_PAGE
+# define htlbpage_to_page(x)	(((unsigned long) REGION_NUMBER(x) << 61)			\
+				 | (REGION_OFFSET(x) >> (HPAGE_SHIFT-PAGE_SHIFT)))
+# define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+extern unsigned int hpage_shift;
+#endif
+
+static __inline__ int
+get_order (unsigned long size)
+{
+	long double d = size - 1;
+	long order;
+
+	order = ia64_getf_exp(d);
+	order = order - PAGE_SHIFT - 0xffff + 1;
+	if (order < 0)
+		order = 0;
+	return order;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#ifdef STRICT_MM_TYPECHECKS
+  /*
+   * These are used to make use of C type-checking..
+   */
+  typedef struct { unsigned long pte; } pte_t;
+  typedef struct { unsigned long pmd; } pmd_t;
+#ifdef CONFIG_PGTABLE_4
+  typedef struct { unsigned long pud; } pud_t;
+#endif
+  typedef struct { unsigned long pgd; } pgd_t;
+  typedef struct { unsigned long pgprot; } pgprot_t;
+  typedef struct page *pgtable_t;
+
+# define pte_val(x)	((x).pte)
+# define pmd_val(x)	((x).pmd)
+#ifdef CONFIG_PGTABLE_4
+# define pud_val(x)	((x).pud)
+#endif
+# define pgd_val(x)	((x).pgd)
+# define pgprot_val(x)	((x).pgprot)
+
+# define __pte(x)	((pte_t) { (x) } )
+# define __pgprot(x)	((pgprot_t) { (x) } )
+
+#else /* !STRICT_MM_TYPECHECKS */
+  /*
+   * .. while these make it easier on the compiler
+   */
+# ifndef __ASSEMBLY__
+    typedef unsigned long pte_t;
+    typedef unsigned long pmd_t;
+    typedef unsigned long pgd_t;
+    typedef unsigned long pgprot_t;
+    typedef struct page *pgtable_t;
+# endif
+
+# define pte_val(x)	(x)
+# define pmd_val(x)	(x)
+# define pgd_val(x)	(x)
+# define pgprot_val(x)	(x)
+
+# define __pte(x)	(x)
+# define __pgd(x)	(x)
+# define __pgprot(x)	(x)
+#endif /* !STRICT_MM_TYPECHECKS */
+
+#define PAGE_OFFSET			RGN_BASE(RGN_KERNEL)
+
+#define VM_DATA_DEFAULT_FLAGS		(VM_READ | VM_WRITE |					\
+					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC |		\
+					 (((current->personality & READ_IMPLIES_EXEC) != 0)	\
+					  ? VM_EXEC : 0))
+
+#endif /* _ASM_IA64_PAGE_H */
diff --git a/arch/ia64/include/asm/pal.h b/arch/ia64/include/asm/pal.h
new file mode 100644
index 000000000000..67b02901ead4
--- /dev/null
+++ b/arch/ia64/include/asm/pal.h
@@ -0,0 +1,1827 @@
+#ifndef _ASM_IA64_PAL_H
+#define _ASM_IA64_PAL_H
+
+/*
+ * Processor Abstraction Layer definitions.
+ *
+ * This is based on Intel IA-64 Architecture Software Developer's Manual rev 1.0
+ * chapter 11 IA-64 Processor Abstraction Layer
+ *
+ * Copyright (C) 1998-2001 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * Copyright (C) 1999 Srinivasa Prasad Thirumalachar <sprasad@sprasad.engr.sgi.com>
+ * Copyright (C) 2008 Silicon Graphics, Inc. (SGI)
+ *
+ * 99/10/01	davidm	Make sure we pass zero for reserved parameters.
+ * 00/03/07	davidm	Updated pal_cache_flush() to be in sync with PAL v2.6.
+ * 00/03/23     cfleck  Modified processor min-state save area to match updated PAL & SAL info
+ * 00/05/24     eranian Updated to latest PAL spec, fix structures bugs, added
+ * 00/05/25	eranian Support for stack calls, and static physical calls
+ * 00/06/18	eranian Support for stacked physical calls
+ * 06/10/26	rja	Support for Intel Itanium Architecture Software Developer's
+ *			Manual Rev 2.2 (Jan 2006)
+ */
+
+/*
+ * Note that some of these calls use a static-register only calling
+ * convention which has nothing to do with the regular calling
+ * convention.
+ */
+#define PAL_CACHE_FLUSH		1	/* flush i/d cache */
+#define PAL_CACHE_INFO		2	/* get detailed i/d cache info */
+#define PAL_CACHE_INIT		3	/* initialize i/d cache */
+#define PAL_CACHE_SUMMARY	4	/* get summary of cache hierarchy */
+#define PAL_MEM_ATTRIB		5	/* list supported memory attributes */
+#define PAL_PTCE_INFO		6	/* purge TLB info */
+#define PAL_VM_INFO		7	/* return supported virtual memory features */
+#define PAL_VM_SUMMARY		8	/* return summary on supported vm features */
+#define PAL_BUS_GET_FEATURES	9	/* return processor bus interface features settings */
+#define PAL_BUS_SET_FEATURES	10	/* set processor bus features */
+#define PAL_DEBUG_INFO		11	/* get number of debug registers */
+#define PAL_FIXED_ADDR		12	/* get fixed component of processors's directed address */
+#define PAL_FREQ_BASE		13	/* base frequency of the platform */
+#define PAL_FREQ_RATIOS		14	/* ratio of processor, bus and ITC frequency */
+#define PAL_PERF_MON_INFO	15	/* return performance monitor info */
+#define PAL_PLATFORM_ADDR	16	/* set processor interrupt block and IO port space addr */
+#define PAL_PROC_GET_FEATURES	17	/* get configurable processor features & settings */
+#define PAL_PROC_SET_FEATURES	18	/* enable/disable configurable processor features */
+#define PAL_RSE_INFO		19	/* return rse information */
+#define PAL_VERSION		20	/* return version of PAL code */
+#define PAL_MC_CLEAR_LOG	21	/* clear all processor log info */
+#define PAL_MC_DRAIN		22	/* drain operations which could result in an MCA */
+#define PAL_MC_EXPECTED		23	/* set/reset expected MCA indicator */
+#define PAL_MC_DYNAMIC_STATE	24	/* get processor dynamic state */
+#define PAL_MC_ERROR_INFO	25	/* get processor MCA info and static state */
+#define PAL_MC_RESUME		26	/* Return to interrupted process */
+#define PAL_MC_REGISTER_MEM	27	/* Register memory for PAL to use during MCAs and inits */
+#define PAL_HALT		28	/* enter the low power HALT state */
+#define PAL_HALT_LIGHT		29	/* enter the low power light halt state*/
+#define PAL_COPY_INFO		30	/* returns info needed to relocate PAL */
+#define PAL_CACHE_LINE_INIT	31	/* init tags & data of cache line */
+#define PAL_PMI_ENTRYPOINT	32	/* register PMI memory entry points with the processor */
+#define PAL_ENTER_IA_32_ENV	33	/* enter IA-32 system environment */
+#define PAL_VM_PAGE_SIZE	34	/* return vm TC and page walker page sizes */
+
+#define PAL_MEM_FOR_TEST	37	/* get amount of memory needed for late processor test */
+#define PAL_CACHE_PROT_INFO	38	/* get i/d cache protection info */
+#define PAL_REGISTER_INFO	39	/* return AR and CR register information*/
+#define PAL_SHUTDOWN		40	/* enter processor shutdown state */
+#define PAL_PREFETCH_VISIBILITY	41	/* Make Processor Prefetches Visible */
+#define PAL_LOGICAL_TO_PHYSICAL 42	/* returns information on logical to physical processor mapping */
+#define PAL_CACHE_SHARED_INFO	43	/* returns information on caches shared by logical processor */
+#define PAL_GET_HW_POLICY	48	/* Get current hardware resource sharing policy */
+#define PAL_SET_HW_POLICY	49	/* Set current hardware resource sharing policy */
+#define PAL_VP_INFO		50	/* Information about virtual processor features */
+#define PAL_MC_HW_TRACKING	51	/* Hardware tracking status */
+
+#define PAL_COPY_PAL		256	/* relocate PAL procedures and PAL PMI */
+#define PAL_HALT_INFO		257	/* return the low power capabilities of processor */
+#define PAL_TEST_PROC		258	/* perform late processor self-test */
+#define PAL_CACHE_READ		259	/* read tag & data of cacheline for diagnostic testing */
+#define PAL_CACHE_WRITE		260	/* write tag & data of cacheline for diagnostic testing */
+#define PAL_VM_TR_READ		261	/* read contents of translation register */
+#define PAL_GET_PSTATE		262	/* get the current P-state */
+#define PAL_SET_PSTATE		263	/* set the P-state */
+#define PAL_BRAND_INFO		274	/* Processor branding information */
+
+#define PAL_GET_PSTATE_TYPE_LASTSET	0
+#define PAL_GET_PSTATE_TYPE_AVGANDRESET	1
+#define PAL_GET_PSTATE_TYPE_AVGNORESET	2
+#define PAL_GET_PSTATE_TYPE_INSTANT	3
+
+#define PAL_MC_ERROR_INJECT	276	/* Injects processor error or returns injection capabilities */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <asm/fpu.h>
+
+/*
+ * Data types needed to pass information into PAL procedures and
+ * interpret information returned by them.
+ */
+
+/* Return status from the PAL procedure */
+typedef s64				pal_status_t;
+
+#define PAL_STATUS_SUCCESS		0	/* No error */
+#define PAL_STATUS_UNIMPLEMENTED	(-1)	/* Unimplemented procedure */
+#define PAL_STATUS_EINVAL		(-2)	/* Invalid argument */
+#define PAL_STATUS_ERROR		(-3)	/* Error */
+#define PAL_STATUS_CACHE_INIT_FAIL	(-4)	/* Could not initialize the
+						 * specified level and type of
+						 * cache without sideeffects
+						 * and "restrict" was 1
+						 */
+#define PAL_STATUS_REQUIRES_MEMORY	(-9)	/* Call requires PAL memory buffer */
+
+/* Processor cache level in the hierarchy */
+typedef u64				pal_cache_level_t;
+#define PAL_CACHE_LEVEL_L0		0	/* L0 */
+#define PAL_CACHE_LEVEL_L1		1	/* L1 */
+#define PAL_CACHE_LEVEL_L2		2	/* L2 */
+
+
+/* Processor cache type at a particular level in the hierarchy */
+
+typedef u64				pal_cache_type_t;
+#define PAL_CACHE_TYPE_INSTRUCTION	1	/* Instruction cache */
+#define PAL_CACHE_TYPE_DATA		2	/* Data or unified cache */
+#define PAL_CACHE_TYPE_INSTRUCTION_DATA	3	/* Both Data & Instruction */
+
+
+#define PAL_CACHE_FLUSH_INVALIDATE	1	/* Invalidate clean lines */
+#define PAL_CACHE_FLUSH_CHK_INTRS	2	/* check for interrupts/mc while flushing */
+
+/* Processor cache line size in bytes  */
+typedef int				pal_cache_line_size_t;
+
+/* Processor cache line state */
+typedef u64				pal_cache_line_state_t;
+#define PAL_CACHE_LINE_STATE_INVALID	0	/* Invalid */
+#define PAL_CACHE_LINE_STATE_SHARED	1	/* Shared */
+#define PAL_CACHE_LINE_STATE_EXCLUSIVE	2	/* Exclusive */
+#define PAL_CACHE_LINE_STATE_MODIFIED	3	/* Modified */
+
+typedef struct pal_freq_ratio {
+	u32 den, num;		/* numerator & denominator */
+} itc_ratio, proc_ratio;
+
+typedef	union  pal_cache_config_info_1_s {
+	struct {
+		u64		u		: 1,	/* 0 Unified cache ? */
+				at		: 2,	/* 2-1 Cache mem attr*/
+				reserved	: 5,	/* 7-3 Reserved */
+				associativity	: 8,	/* 16-8 Associativity*/
+				line_size	: 8,	/* 23-17 Line size */
+				stride		: 8,	/* 31-24 Stride */
+				store_latency	: 8,	/*39-32 Store latency*/
+				load_latency	: 8,	/* 47-40 Load latency*/
+				store_hints	: 8,	/* 55-48 Store hints*/
+				load_hints	: 8;	/* 63-56 Load hints */
+	} pcci1_bits;
+	u64			pcci1_data;
+} pal_cache_config_info_1_t;
+
+typedef	union  pal_cache_config_info_2_s {
+	struct {
+		u32		cache_size;		/*cache size in bytes*/
+
+
+		u32		alias_boundary	: 8,	/* 39-32 aliased addr
+							 * separation for max
+							 * performance.
+							 */
+				tag_ls_bit	: 8,	/* 47-40 LSb of addr*/
+				tag_ms_bit	: 8,	/* 55-48 MSb of addr*/
+				reserved	: 8;	/* 63-56 Reserved */
+	} pcci2_bits;
+	u64			pcci2_data;
+} pal_cache_config_info_2_t;
+
+
+typedef struct pal_cache_config_info_s {
+	pal_status_t			pcci_status;
+	pal_cache_config_info_1_t	pcci_info_1;
+	pal_cache_config_info_2_t	pcci_info_2;
+	u64				pcci_reserved;
+} pal_cache_config_info_t;
+
+#define pcci_ld_hints		pcci_info_1.pcci1_bits.load_hints
+#define pcci_st_hints		pcci_info_1.pcci1_bits.store_hints
+#define pcci_ld_latency		pcci_info_1.pcci1_bits.load_latency
+#define pcci_st_latency		pcci_info_1.pcci1_bits.store_latency
+#define pcci_stride		pcci_info_1.pcci1_bits.stride
+#define pcci_line_size		pcci_info_1.pcci1_bits.line_size
+#define pcci_assoc		pcci_info_1.pcci1_bits.associativity
+#define pcci_cache_attr		pcci_info_1.pcci1_bits.at
+#define pcci_unified		pcci_info_1.pcci1_bits.u
+#define pcci_tag_msb		pcci_info_2.pcci2_bits.tag_ms_bit
+#define pcci_tag_lsb		pcci_info_2.pcci2_bits.tag_ls_bit
+#define pcci_alias_boundary	pcci_info_2.pcci2_bits.alias_boundary
+#define pcci_cache_size		pcci_info_2.pcci2_bits.cache_size
+
+
+
+/* Possible values for cache attributes */
+
+#define PAL_CACHE_ATTR_WT		0	/* Write through cache */
+#define PAL_CACHE_ATTR_WB		1	/* Write back cache */
+#define PAL_CACHE_ATTR_WT_OR_WB		2	/* Either write thru or write
+						 * back depending on TLB
+						 * memory attributes
+						 */
+
+
+/* Possible values for cache hints */
+
+#define PAL_CACHE_HINT_TEMP_1		0	/* Temporal level 1 */
+#define PAL_CACHE_HINT_NTEMP_1		1	/* Non-temporal level 1 */
+#define PAL_CACHE_HINT_NTEMP_ALL	3	/* Non-temporal all levels */
+
+/* Processor cache protection  information */
+typedef union pal_cache_protection_element_u {
+	u32			pcpi_data;
+	struct {
+		u32		data_bits	: 8, /* # data bits covered by
+						      * each unit of protection
+						      */
+
+				tagprot_lsb	: 6, /* Least -do- */
+				tagprot_msb	: 6, /* Most Sig. tag address
+						      * bit that this
+						      * protection covers.
+						      */
+				prot_bits	: 6, /* # of protection bits */
+				method		: 4, /* Protection method */
+				t_d		: 2; /* Indicates which part
+						      * of the cache this
+						      * protection encoding
+						      * applies.
+						      */
+	} pcp_info;
+} pal_cache_protection_element_t;
+
+#define pcpi_cache_prot_part	pcp_info.t_d
+#define pcpi_prot_method	pcp_info.method
+#define pcpi_prot_bits		pcp_info.prot_bits
+#define pcpi_tagprot_msb	pcp_info.tagprot_msb
+#define pcpi_tagprot_lsb	pcp_info.tagprot_lsb
+#define pcpi_data_bits		pcp_info.data_bits
+
+/* Processor cache part encodings */
+#define PAL_CACHE_PROT_PART_DATA	0	/* Data protection  */
+#define PAL_CACHE_PROT_PART_TAG		1	/* Tag  protection */
+#define PAL_CACHE_PROT_PART_TAG_DATA	2	/* Tag+data protection (tag is
+						 * more significant )
+						 */
+#define PAL_CACHE_PROT_PART_DATA_TAG	3	/* Data+tag protection (data is
+						 * more significant )
+						 */
+#define PAL_CACHE_PROT_PART_MAX		6
+
+
+typedef struct pal_cache_protection_info_s {
+	pal_status_t			pcpi_status;
+	pal_cache_protection_element_t	pcp_info[PAL_CACHE_PROT_PART_MAX];
+} pal_cache_protection_info_t;
+
+
+/* Processor cache protection method encodings */
+#define PAL_CACHE_PROT_METHOD_NONE		0	/* No protection */
+#define PAL_CACHE_PROT_METHOD_ODD_PARITY	1	/* Odd parity */
+#define PAL_CACHE_PROT_METHOD_EVEN_PARITY	2	/* Even parity */
+#define PAL_CACHE_PROT_METHOD_ECC		3	/* ECC protection */
+
+
+/* Processor cache line identification in the hierarchy */
+typedef union pal_cache_line_id_u {
+	u64			pclid_data;
+	struct {
+		u64		cache_type	: 8,	/* 7-0 cache type */
+				level		: 8,	/* 15-8 level of the
+							 * cache in the
+							 * hierarchy.
+							 */
+				way		: 8,	/* 23-16 way in the set
+							 */
+				part		: 8,	/* 31-24 part of the
+							 * cache
+							 */
+				reserved	: 32;	/* 63-32 is reserved*/
+	} pclid_info_read;
+	struct {
+		u64		cache_type	: 8,	/* 7-0 cache type */
+				level		: 8,	/* 15-8 level of the
+							 * cache in the
+							 * hierarchy.
+							 */
+				way		: 8,	/* 23-16 way in the set
+							 */
+				part		: 8,	/* 31-24 part of the
+							 * cache
+							 */
+				mesi		: 8,	/* 39-32 cache line
+							 * state
+							 */
+				start		: 8,	/* 47-40 lsb of data to
+							 * invert
+							 */
+				length		: 8,	/* 55-48 #bits to
+							 * invert
+							 */
+				trigger		: 8;	/* 63-56 Trigger error
+							 * by doing a load
+							 * after the write
+							 */
+
+	} pclid_info_write;
+} pal_cache_line_id_u_t;
+
+#define pclid_read_part		pclid_info_read.part
+#define pclid_read_way		pclid_info_read.way
+#define pclid_read_level	pclid_info_read.level
+#define pclid_read_cache_type	pclid_info_read.cache_type
+
+#define pclid_write_trigger	pclid_info_write.trigger
+#define pclid_write_length	pclid_info_write.length
+#define pclid_write_start	pclid_info_write.start
+#define pclid_write_mesi	pclid_info_write.mesi
+#define pclid_write_part	pclid_info_write.part
+#define pclid_write_way		pclid_info_write.way
+#define pclid_write_level	pclid_info_write.level
+#define pclid_write_cache_type	pclid_info_write.cache_type
+
+/* Processor cache line part encodings */
+#define PAL_CACHE_LINE_ID_PART_DATA		0	/* Data */
+#define PAL_CACHE_LINE_ID_PART_TAG		1	/* Tag */
+#define PAL_CACHE_LINE_ID_PART_DATA_PROT	2	/* Data protection */
+#define PAL_CACHE_LINE_ID_PART_TAG_PROT		3	/* Tag protection */
+#define PAL_CACHE_LINE_ID_PART_DATA_TAG_PROT	4	/* Data+tag
+							 * protection
+							 */
+typedef struct pal_cache_line_info_s {
+	pal_status_t		pcli_status;		/* Return status of the read cache line
+							 * info call.
+							 */
+	u64			pcli_data;		/* 64-bit data, tag, protection bits .. */
+	u64			pcli_data_len;		/* data length in bits */
+	pal_cache_line_state_t	pcli_cache_line_state;	/* mesi state */
+
+} pal_cache_line_info_t;
+
+
+/* Machine Check related crap */
+
+/* Pending event status bits  */
+typedef u64					pal_mc_pending_events_t;
+
+#define PAL_MC_PENDING_MCA			(1 << 0)
+#define PAL_MC_PENDING_INIT			(1 << 1)
+
+/* Error information type */
+typedef u64					pal_mc_info_index_t;
+
+#define PAL_MC_INFO_PROCESSOR			0	/* Processor */
+#define PAL_MC_INFO_CACHE_CHECK			1	/* Cache check */
+#define PAL_MC_INFO_TLB_CHECK			2	/* Tlb check */
+#define PAL_MC_INFO_BUS_CHECK			3	/* Bus check */
+#define PAL_MC_INFO_REQ_ADDR			4	/* Requestor address */
+#define PAL_MC_INFO_RESP_ADDR			5	/* Responder address */
+#define PAL_MC_INFO_TARGET_ADDR			6	/* Target address */
+#define PAL_MC_INFO_IMPL_DEP			7	/* Implementation
+							 * dependent
+							 */
+
+#define PAL_TLB_CHECK_OP_PURGE			8
+
+typedef struct pal_process_state_info_s {
+	u64		reserved1	: 2,
+			rz		: 1,	/* PAL_CHECK processor
+						 * rendezvous
+						 * successful.
+						 */
+
+			ra		: 1,	/* PAL_CHECK attempted
+						 * a rendezvous.
+						 */
+			me		: 1,	/* Distinct multiple
+						 * errors occurred
+						 */
+
+			mn		: 1,	/* Min. state save
+						 * area has been
+						 * registered with PAL
+						 */
+
+			sy		: 1,	/* Storage integrity
+						 * synched
+						 */
+
+
+			co		: 1,	/* Continuable */
+			ci		: 1,	/* MC isolated */
+			us		: 1,	/* Uncontained storage
+						 * damage.
+						 */
+
+
+			hd		: 1,	/* Non-essential hw
+						 * lost (no loss of
+						 * functionality)
+						 * causing the
+						 * processor to run in
+						 * degraded mode.
+						 */
+
+			tl		: 1,	/* 1 => MC occurred
+						 * after an instr was
+						 * executed but before
+						 * the trap that
+						 * resulted from instr
+						 * execution was
+						 * generated.
+						 * (Trap Lost )
+						 */
+			mi		: 1,	/* More information available
+						 * call PAL_MC_ERROR_INFO
+						 */
+			pi		: 1,	/* Precise instruction pointer */
+			pm		: 1,	/* Precise min-state save area */
+
+			dy		: 1,	/* Processor dynamic
+						 * state valid
+						 */
+
+
+			in		: 1,	/* 0 = MC, 1 = INIT */
+			rs		: 1,	/* RSE valid */
+			cm		: 1,	/* MC corrected */
+			ex		: 1,	/* MC is expected */
+			cr		: 1,	/* Control regs valid*/
+			pc		: 1,	/* Perf cntrs valid */
+			dr		: 1,	/* Debug regs valid */
+			tr		: 1,	/* Translation regs
+						 * valid
+						 */
+			rr		: 1,	/* Region regs valid */
+			ar		: 1,	/* App regs valid */
+			br		: 1,	/* Branch regs valid */
+			pr		: 1,	/* Predicate registers
+						 * valid
+						 */
+
+			fp		: 1,	/* fp registers valid*/
+			b1		: 1,	/* Preserved bank one
+						 * general registers
+						 * are valid
+						 */
+			b0		: 1,	/* Preserved bank zero
+						 * general registers
+						 * are valid
+						 */
+			gr		: 1,	/* General registers
+						 * are valid
+						 * (excl. banked regs)
+						 */
+			dsize		: 16,	/* size of dynamic
+						 * state returned
+						 * by the processor
+						 */
+
+			se		: 1,	/* Shared error.  MCA in a
+						   shared structure */
+			reserved2	: 10,
+			cc		: 1,	/* Cache check */
+			tc		: 1,	/* TLB check */
+			bc		: 1,	/* Bus check */
+			rc		: 1,	/* Register file check */
+			uc		: 1;	/* Uarch check */
+
+} pal_processor_state_info_t;
+
+typedef struct pal_cache_check_info_s {
+	u64		op		: 4,	/* Type of cache
+						 * operation that
+						 * caused the machine
+						 * check.
+						 */
+			level		: 2,	/* Cache level */
+			reserved1	: 2,
+			dl		: 1,	/* Failure in data part
+						 * of cache line
+						 */
+			tl		: 1,	/* Failure in tag part
+						 * of cache line
+						 */
+			dc		: 1,	/* Failure in dcache */
+			ic		: 1,	/* Failure in icache */
+			mesi		: 3,	/* Cache line state */
+			mv		: 1,	/* mesi valid */
+			way		: 5,	/* Way in which the
+						 * error occurred
+						 */
+			wiv		: 1,	/* Way field valid */
+			reserved2	: 1,
+			dp		: 1,	/* Data poisoned on MBE */
+			reserved3	: 6,
+			hlth		: 2,	/* Health indicator */
+
+			index		: 20,	/* Cache line index */
+			reserved4	: 2,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			tv		: 1,	/* Target address
+						 * structure is valid
+						 */
+			rq		: 1,	/* Requester identifier
+						 * structure is valid
+						 */
+			rp		: 1,	/* Responder identifier
+						 * structure is valid
+						 */
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_cache_check_info_t;
+
+typedef struct pal_tlb_check_info_s {
+
+	u64		tr_slot		: 8,	/* Slot# of TR where
+						 * error occurred
+						 */
+			trv		: 1,	/* tr_slot field is valid */
+			reserved1	: 1,
+			level		: 2,	/* TLB level where failure occurred */
+			reserved2	: 4,
+			dtr		: 1,	/* Fail in data TR */
+			itr		: 1,	/* Fail in inst TR */
+			dtc		: 1,	/* Fail in data TC */
+			itc		: 1,	/* Fail in inst. TC */
+			op		: 4,	/* Cache operation */
+			reserved3	: 6,
+			hlth		: 2,	/* Health indicator */
+			reserved4	: 22,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			tv		: 1,	/* Target address
+						 * structure is valid
+						 */
+			rq		: 1,	/* Requester identifier
+						 * structure is valid
+						 */
+			rp		: 1,	/* Responder identifier
+						 * structure is valid
+						 */
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_tlb_check_info_t;
+
+typedef struct pal_bus_check_info_s {
+	u64		size		: 5,	/* Xaction size */
+			ib		: 1,	/* Internal bus error */
+			eb		: 1,	/* External bus error */
+			cc		: 1,	/* Error occurred
+						 * during cache-cache
+						 * transfer.
+						 */
+			type		: 8,	/* Bus xaction type*/
+			sev		: 5,	/* Bus error severity*/
+			hier		: 2,	/* Bus hierarchy level */
+			dp		: 1,	/* Data poisoned on MBE */
+			bsi		: 8,	/* Bus error status
+						 * info
+						 */
+			reserved2	: 22,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			tv		: 1,	/* Target address
+						 * structure is valid
+						 */
+			rq		: 1,	/* Requester identifier
+						 * structure is valid
+						 */
+			rp		: 1,	/* Responder identifier
+						 * structure is valid
+						 */
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_bus_check_info_t;
+
+typedef struct pal_reg_file_check_info_s {
+	u64		id		: 4,	/* Register file identifier */
+			op		: 4,	/* Type of register
+						 * operation that
+						 * caused the machine
+						 * check.
+						 */
+			reg_num		: 7,	/* Register number */
+			rnv		: 1,	/* reg_num valid */
+			reserved2	: 38,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			reserved3	: 3,
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_reg_file_check_info_t;
+
+typedef struct pal_uarch_check_info_s {
+	u64		sid		: 5,	/* Structure identification */
+			level		: 3,	/* Level of failure */
+			array_id	: 4,	/* Array identification */
+			op		: 4,	/* Type of
+						 * operation that
+						 * caused the machine
+						 * check.
+						 */
+			way		: 6,	/* Way of structure */
+			wv		: 1,	/* way valid */
+			xv		: 1,	/* index valid */
+			reserved1	: 6,
+			hlth		: 2,	/* Health indicator */
+			index		: 8,	/* Index or set of the uarch
+						 * structure that failed.
+						 */
+			reserved2	: 24,
+
+			is		: 1,	/* instruction set (1 == ia32) */
+			iv		: 1,	/* instruction set field valid */
+			pl		: 2,	/* privilege level */
+			pv		: 1,	/* privilege level field valid */
+			mcc		: 1,	/* Machine check corrected */
+			tv		: 1,	/* Target address
+						 * structure is valid
+						 */
+			rq		: 1,	/* Requester identifier
+						 * structure is valid
+						 */
+			rp		: 1,	/* Responder identifier
+						 * structure is valid
+						 */
+			pi		: 1;	/* Precise instruction pointer
+						 * structure is valid
+						 */
+} pal_uarch_check_info_t;
+
+typedef union pal_mc_error_info_u {
+	u64				pmei_data;
+	pal_processor_state_info_t	pme_processor;
+	pal_cache_check_info_t		pme_cache;
+	pal_tlb_check_info_t		pme_tlb;
+	pal_bus_check_info_t		pme_bus;
+	pal_reg_file_check_info_t	pme_reg_file;
+	pal_uarch_check_info_t		pme_uarch;
+} pal_mc_error_info_t;
+
+#define pmci_proc_unknown_check			pme_processor.uc
+#define pmci_proc_bus_check			pme_processor.bc
+#define pmci_proc_tlb_check			pme_processor.tc
+#define pmci_proc_cache_check			pme_processor.cc
+#define pmci_proc_dynamic_state_size		pme_processor.dsize
+#define pmci_proc_gpr_valid			pme_processor.gr
+#define pmci_proc_preserved_bank0_gpr_valid	pme_processor.b0
+#define pmci_proc_preserved_bank1_gpr_valid	pme_processor.b1
+#define pmci_proc_fp_valid			pme_processor.fp
+#define pmci_proc_predicate_regs_valid		pme_processor.pr
+#define pmci_proc_branch_regs_valid		pme_processor.br
+#define pmci_proc_app_regs_valid		pme_processor.ar
+#define pmci_proc_region_regs_valid		pme_processor.rr
+#define pmci_proc_translation_regs_valid	pme_processor.tr
+#define pmci_proc_debug_regs_valid		pme_processor.dr
+#define pmci_proc_perf_counters_valid		pme_processor.pc
+#define pmci_proc_control_regs_valid		pme_processor.cr
+#define pmci_proc_machine_check_expected	pme_processor.ex
+#define pmci_proc_machine_check_corrected	pme_processor.cm
+#define pmci_proc_rse_valid			pme_processor.rs
+#define pmci_proc_machine_check_or_init		pme_processor.in
+#define pmci_proc_dynamic_state_valid		pme_processor.dy
+#define pmci_proc_operation			pme_processor.op
+#define pmci_proc_trap_lost			pme_processor.tl
+#define pmci_proc_hardware_damage		pme_processor.hd
+#define pmci_proc_uncontained_storage_damage	pme_processor.us
+#define pmci_proc_machine_check_isolated	pme_processor.ci
+#define pmci_proc_continuable			pme_processor.co
+#define pmci_proc_storage_intergrity_synced	pme_processor.sy
+#define pmci_proc_min_state_save_area_regd	pme_processor.mn
+#define	pmci_proc_distinct_multiple_errors	pme_processor.me
+#define pmci_proc_pal_attempted_rendezvous	pme_processor.ra
+#define pmci_proc_pal_rendezvous_complete	pme_processor.rz
+
+
+#define pmci_cache_level			pme_cache.level
+#define pmci_cache_line_state			pme_cache.mesi
+#define pmci_cache_line_state_valid		pme_cache.mv
+#define pmci_cache_line_index			pme_cache.index
+#define pmci_cache_instr_cache_fail		pme_cache.ic
+#define pmci_cache_data_cache_fail		pme_cache.dc
+#define pmci_cache_line_tag_fail		pme_cache.tl
+#define pmci_cache_line_data_fail		pme_cache.dl
+#define pmci_cache_operation			pme_cache.op
+#define pmci_cache_way_valid			pme_cache.wv
+#define pmci_cache_target_address_valid		pme_cache.tv
+#define pmci_cache_way				pme_cache.way
+#define pmci_cache_mc				pme_cache.mc
+
+#define pmci_tlb_instr_translation_cache_fail	pme_tlb.itc
+#define pmci_tlb_data_translation_cache_fail	pme_tlb.dtc
+#define pmci_tlb_instr_translation_reg_fail	pme_tlb.itr
+#define pmci_tlb_data_translation_reg_fail	pme_tlb.dtr
+#define pmci_tlb_translation_reg_slot		pme_tlb.tr_slot
+#define pmci_tlb_mc				pme_tlb.mc
+
+#define pmci_bus_status_info			pme_bus.bsi
+#define pmci_bus_req_address_valid		pme_bus.rq
+#define pmci_bus_resp_address_valid		pme_bus.rp
+#define pmci_bus_target_address_valid		pme_bus.tv
+#define pmci_bus_error_severity			pme_bus.sev
+#define pmci_bus_transaction_type		pme_bus.type
+#define pmci_bus_cache_cache_transfer		pme_bus.cc
+#define pmci_bus_transaction_size		pme_bus.size
+#define pmci_bus_internal_error			pme_bus.ib
+#define pmci_bus_external_error			pme_bus.eb
+#define pmci_bus_mc				pme_bus.mc
+
+/*
+ * NOTE: this min_state_save area struct only includes the 1KB
+ * architectural state save area.  The other 3 KB is scratch space
+ * for PAL.
+ */
+
+typedef struct pal_min_state_area_s {
+	u64	pmsa_nat_bits;		/* nat bits for saved GRs  */
+	u64	pmsa_gr[15];		/* GR1	- GR15		   */
+	u64	pmsa_bank0_gr[16];	/* GR16 - GR31		   */
+	u64	pmsa_bank1_gr[16];	/* GR16 - GR31		   */
+	u64	pmsa_pr;		/* predicate registers	   */
+	u64	pmsa_br0;		/* branch register 0	   */
+	u64	pmsa_rsc;		/* ar.rsc		   */
+	u64	pmsa_iip;		/* cr.iip		   */
+	u64	pmsa_ipsr;		/* cr.ipsr		   */
+	u64	pmsa_ifs;		/* cr.ifs		   */
+	u64	pmsa_xip;		/* previous iip		   */
+	u64	pmsa_xpsr;		/* previous psr		   */
+	u64	pmsa_xfs;		/* previous ifs		   */
+	u64	pmsa_br1;		/* branch register 1	   */
+	u64	pmsa_reserved[70];	/* pal_min_state_area should total to 1KB */
+} pal_min_state_area_t;
+
+
+struct ia64_pal_retval {
+	/*
+	 * A zero status value indicates call completed without error.
+	 * A negative status value indicates reason of call failure.
+	 * A positive status value indicates success but an
+	 * informational value should be printed (e.g., "reboot for
+	 * change to take effect").
+	 */
+	s64 status;
+	u64 v0;
+	u64 v1;
+	u64 v2;
+};
+
+/*
+ * Note: Currently unused PAL arguments are generally labeled
+ * "reserved" so the value specified in the PAL documentation
+ * (generally 0) MUST be passed.  Reserved parameters are not optional
+ * parameters.
+ */
+extern struct ia64_pal_retval ia64_pal_call_static (u64, u64, u64, u64);
+extern struct ia64_pal_retval ia64_pal_call_stacked (u64, u64, u64, u64);
+extern struct ia64_pal_retval ia64_pal_call_phys_static (u64, u64, u64, u64);
+extern struct ia64_pal_retval ia64_pal_call_phys_stacked (u64, u64, u64, u64);
+extern void ia64_save_scratch_fpregs (struct ia64_fpreg *);
+extern void ia64_load_scratch_fpregs (struct ia64_fpreg *);
+
+#define PAL_CALL(iprv,a0,a1,a2,a3) do {			\
+	struct ia64_fpreg fr[6];			\
+	ia64_save_scratch_fpregs(fr);			\
+	iprv = ia64_pal_call_static(a0, a1, a2, a3);	\
+	ia64_load_scratch_fpregs(fr);			\
+} while (0)
+
+#define PAL_CALL_STK(iprv,a0,a1,a2,a3) do {		\
+	struct ia64_fpreg fr[6];			\
+	ia64_save_scratch_fpregs(fr);			\
+	iprv = ia64_pal_call_stacked(a0, a1, a2, a3);	\
+	ia64_load_scratch_fpregs(fr);			\
+} while (0)
+
+#define PAL_CALL_PHYS(iprv,a0,a1,a2,a3) do {			\
+	struct ia64_fpreg fr[6];				\
+	ia64_save_scratch_fpregs(fr);				\
+	iprv = ia64_pal_call_phys_static(a0, a1, a2, a3);	\
+	ia64_load_scratch_fpregs(fr);				\
+} while (0)
+
+#define PAL_CALL_PHYS_STK(iprv,a0,a1,a2,a3) do {		\
+	struct ia64_fpreg fr[6];				\
+	ia64_save_scratch_fpregs(fr);				\
+	iprv = ia64_pal_call_phys_stacked(a0, a1, a2, a3);	\
+	ia64_load_scratch_fpregs(fr);				\
+} while (0)
+
+typedef int (*ia64_pal_handler) (u64, ...);
+extern ia64_pal_handler ia64_pal;
+extern void ia64_pal_handler_init (void *);
+
+extern ia64_pal_handler ia64_pal;
+
+extern pal_cache_config_info_t		l0d_cache_config_info;
+extern pal_cache_config_info_t		l0i_cache_config_info;
+extern pal_cache_config_info_t		l1_cache_config_info;
+extern pal_cache_config_info_t		l2_cache_config_info;
+
+extern pal_cache_protection_info_t	l0d_cache_protection_info;
+extern pal_cache_protection_info_t	l0i_cache_protection_info;
+extern pal_cache_protection_info_t	l1_cache_protection_info;
+extern pal_cache_protection_info_t	l2_cache_protection_info;
+
+extern pal_cache_config_info_t		pal_cache_config_info_get(pal_cache_level_t,
+								  pal_cache_type_t);
+
+extern pal_cache_protection_info_t	pal_cache_protection_info_get(pal_cache_level_t,
+								      pal_cache_type_t);
+
+
+extern void				pal_error(int);
+
+
+/* Useful wrappers for the current list of pal procedures */
+
+typedef union pal_bus_features_u {
+	u64	pal_bus_features_val;
+	struct {
+		u64	pbf_reserved1				:	29;
+		u64	pbf_req_bus_parking			:	1;
+		u64	pbf_bus_lock_mask			:	1;
+		u64	pbf_enable_half_xfer_rate		:	1;
+		u64	pbf_reserved2				:	20;
+		u64	pbf_enable_shared_line_replace		:	1;
+		u64	pbf_enable_exclusive_line_replace	:	1;
+		u64	pbf_disable_xaction_queueing		:	1;
+		u64	pbf_disable_resp_err_check		:	1;
+		u64	pbf_disable_berr_check			:	1;
+		u64	pbf_disable_bus_req_internal_err_signal	:	1;
+		u64	pbf_disable_bus_req_berr_signal		:	1;
+		u64	pbf_disable_bus_init_event_check	:	1;
+		u64	pbf_disable_bus_init_event_signal	:	1;
+		u64	pbf_disable_bus_addr_err_check		:	1;
+		u64	pbf_disable_bus_addr_err_signal		:	1;
+		u64	pbf_disable_bus_data_err_check		:	1;
+	} pal_bus_features_s;
+} pal_bus_features_u_t;
+
+extern void pal_bus_features_print (u64);
+
+/* Provide information about configurable processor bus features */
+static inline s64
+ia64_pal_bus_get_features (pal_bus_features_u_t *features_avail,
+			   pal_bus_features_u_t *features_status,
+			   pal_bus_features_u_t *features_control)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_BUS_GET_FEATURES, 0, 0, 0);
+	if (features_avail)
+		features_avail->pal_bus_features_val = iprv.v0;
+	if (features_status)
+		features_status->pal_bus_features_val = iprv.v1;
+	if (features_control)
+		features_control->pal_bus_features_val = iprv.v2;
+	return iprv.status;
+}
+
+/* Enables/disables specific processor bus features */
+static inline s64
+ia64_pal_bus_set_features (pal_bus_features_u_t feature_select)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_BUS_SET_FEATURES, feature_select.pal_bus_features_val, 0, 0);
+	return iprv.status;
+}
+
+/* Get detailed cache information */
+static inline s64
+ia64_pal_cache_config_info (u64 cache_level, u64 cache_type, pal_cache_config_info_t *conf)
+{
+	struct ia64_pal_retval iprv;
+
+	PAL_CALL(iprv, PAL_CACHE_INFO, cache_level, cache_type, 0);
+
+	if (iprv.status == 0) {
+		conf->pcci_status                 = iprv.status;
+		conf->pcci_info_1.pcci1_data      = iprv.v0;
+		conf->pcci_info_2.pcci2_data      = iprv.v1;
+		conf->pcci_reserved               = iprv.v2;
+	}
+	return iprv.status;
+
+}
+
+/* Get detailed cche protection information */
+static inline s64
+ia64_pal_cache_prot_info (u64 cache_level, u64 cache_type, pal_cache_protection_info_t *prot)
+{
+	struct ia64_pal_retval iprv;
+
+	PAL_CALL(iprv, PAL_CACHE_PROT_INFO, cache_level, cache_type, 0);
+
+	if (iprv.status == 0) {
+		prot->pcpi_status           = iprv.status;
+		prot->pcp_info[0].pcpi_data = iprv.v0 & 0xffffffff;
+		prot->pcp_info[1].pcpi_data = iprv.v0 >> 32;
+		prot->pcp_info[2].pcpi_data = iprv.v1 & 0xffffffff;
+		prot->pcp_info[3].pcpi_data = iprv.v1 >> 32;
+		prot->pcp_info[4].pcpi_data = iprv.v2 & 0xffffffff;
+		prot->pcp_info[5].pcpi_data = iprv.v2 >> 32;
+	}
+	return iprv.status;
+}
+
+/*
+ * Flush the processor instruction or data caches.  *PROGRESS must be
+ * initialized to zero before calling this for the first time..
+ */
+static inline s64
+ia64_pal_cache_flush (u64 cache_type, u64 invalidate, u64 *progress, u64 *vector)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_FLUSH, cache_type, invalidate, *progress);
+	if (vector)
+		*vector = iprv.v0;
+	*progress = iprv.v1;
+	return iprv.status;
+}
+
+
+/* Initialize the processor controlled caches */
+static inline s64
+ia64_pal_cache_init (u64 level, u64 cache_type, u64 rest)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_INIT, level, cache_type, rest);
+	return iprv.status;
+}
+
+/* Initialize the tags and data of a data or unified cache line of
+ * processor controlled cache to known values without the availability
+ * of backing memory.
+ */
+static inline s64
+ia64_pal_cache_line_init (u64 physical_addr, u64 data_value)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_LINE_INIT, physical_addr, data_value, 0);
+	return iprv.status;
+}
+
+
+/* Read the data and tag of a processor controlled cache line for diags */
+static inline s64
+ia64_pal_cache_read (pal_cache_line_id_u_t line_id, u64 physical_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS_STK(iprv, PAL_CACHE_READ, line_id.pclid_data,
+				physical_addr, 0);
+	return iprv.status;
+}
+
+/* Return summary information about the hierarchy of caches controlled by the processor */
+static inline s64
+ia64_pal_cache_summary (u64 *cache_levels, u64 *unique_caches)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_CACHE_SUMMARY, 0, 0, 0);
+	if (cache_levels)
+		*cache_levels = iprv.v0;
+	if (unique_caches)
+		*unique_caches = iprv.v1;
+	return iprv.status;
+}
+
+/* Write the data and tag of a processor-controlled cache line for diags */
+static inline s64
+ia64_pal_cache_write (pal_cache_line_id_u_t line_id, u64 physical_addr, u64 data)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS_STK(iprv, PAL_CACHE_WRITE, line_id.pclid_data,
+				physical_addr, data);
+	return iprv.status;
+}
+
+
+/* Return the parameters needed to copy relocatable PAL procedures from ROM to memory */
+static inline s64
+ia64_pal_copy_info (u64 copy_type, u64 num_procs, u64 num_iopics,
+		    u64 *buffer_size, u64 *buffer_align)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_COPY_INFO, copy_type, num_procs, num_iopics);
+	if (buffer_size)
+		*buffer_size = iprv.v0;
+	if (buffer_align)
+		*buffer_align = iprv.v1;
+	return iprv.status;
+}
+
+/* Copy relocatable PAL procedures from ROM to memory */
+static inline s64
+ia64_pal_copy_pal (u64 target_addr, u64 alloc_size, u64 processor, u64 *pal_proc_offset)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_COPY_PAL, target_addr, alloc_size, processor);
+	if (pal_proc_offset)
+		*pal_proc_offset = iprv.v0;
+	return iprv.status;
+}
+
+/* Return the number of instruction and data debug register pairs */
+static inline s64
+ia64_pal_debug_info (u64 *inst_regs,  u64 *data_regs)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_DEBUG_INFO, 0, 0, 0);
+	if (inst_regs)
+		*inst_regs = iprv.v0;
+	if (data_regs)
+		*data_regs = iprv.v1;
+
+	return iprv.status;
+}
+
+#ifdef TBD
+/* Switch from IA64-system environment to IA-32 system environment */
+static inline s64
+ia64_pal_enter_ia32_env (ia32_env1, ia32_env2, ia32_env3)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_ENTER_IA_32_ENV, ia32_env1, ia32_env2, ia32_env3);
+	return iprv.status;
+}
+#endif
+
+/* Get unique geographical address of this processor on its bus */
+static inline s64
+ia64_pal_fixed_addr (u64 *global_unique_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_FIXED_ADDR, 0, 0, 0);
+	if (global_unique_addr)
+		*global_unique_addr = iprv.v0;
+	return iprv.status;
+}
+
+/* Get base frequency of the platform if generated by the processor */
+static inline s64
+ia64_pal_freq_base (u64 *platform_base_freq)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_FREQ_BASE, 0, 0, 0);
+	if (platform_base_freq)
+		*platform_base_freq = iprv.v0;
+	return iprv.status;
+}
+
+/*
+ * Get the ratios for processor frequency, bus frequency and interval timer to
+ * to base frequency of the platform
+ */
+static inline s64
+ia64_pal_freq_ratios (struct pal_freq_ratio *proc_ratio, struct pal_freq_ratio *bus_ratio,
+		      struct pal_freq_ratio *itc_ratio)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_FREQ_RATIOS, 0, 0, 0);
+	if (proc_ratio)
+		*(u64 *)proc_ratio = iprv.v0;
+	if (bus_ratio)
+		*(u64 *)bus_ratio = iprv.v1;
+	if (itc_ratio)
+		*(u64 *)itc_ratio = iprv.v2;
+	return iprv.status;
+}
+
+/*
+ * Get the current hardware resource sharing policy of the processor
+ */
+static inline s64
+ia64_pal_get_hw_policy (u64 proc_num, u64 *cur_policy, u64 *num_impacted,
+			u64 *la)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_GET_HW_POLICY, proc_num, 0, 0);
+	if (cur_policy)
+		*cur_policy = iprv.v0;
+	if (num_impacted)
+		*num_impacted = iprv.v1;
+	if (la)
+		*la = iprv.v2;
+	return iprv.status;
+}
+
+/* Make the processor enter HALT or one of the implementation dependent low
+ * power states where prefetching and execution are suspended and cache and
+ * TLB coherency is not maintained.
+ */
+static inline s64
+ia64_pal_halt (u64 halt_state)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_HALT, halt_state, 0, 0);
+	return iprv.status;
+}
+
+typedef union pal_power_mgmt_info_u {
+	u64			ppmi_data;
+	struct {
+	       u64		exit_latency		: 16,
+				entry_latency		: 16,
+				power_consumption	: 28,
+				im			: 1,
+				co			: 1,
+				reserved		: 2;
+	} pal_power_mgmt_info_s;
+} pal_power_mgmt_info_u_t;
+
+/* Return information about processor's optional power management capabilities. */
+static inline s64
+ia64_pal_halt_info (pal_power_mgmt_info_u_t *power_buf)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_STK(iprv, PAL_HALT_INFO, (unsigned long) power_buf, 0, 0);
+	return iprv.status;
+}
+
+/* Get the current P-state information */
+static inline s64
+ia64_pal_get_pstate (u64 *pstate_index, unsigned long type)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_STK(iprv, PAL_GET_PSTATE, type, 0, 0);
+	*pstate_index = iprv.v0;
+	return iprv.status;
+}
+
+/* Set the P-state */
+static inline s64
+ia64_pal_set_pstate (u64 pstate_index)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_STK(iprv, PAL_SET_PSTATE, pstate_index, 0, 0);
+	return iprv.status;
+}
+
+/* Processor branding information*/
+static inline s64
+ia64_pal_get_brand_info (char *brand_info)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_STK(iprv, PAL_BRAND_INFO, 0, (u64)brand_info, 0);
+	return iprv.status;
+}
+
+/* Cause the processor to enter LIGHT HALT state, where prefetching and execution are
+ * suspended, but cache and TLB coherency is maintained.
+ */
+static inline s64
+ia64_pal_halt_light (void)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_HALT_LIGHT, 0, 0, 0);
+	return iprv.status;
+}
+
+/* Clear all the processor error logging   registers and reset the indicator that allows
+ * the error logging registers to be written. This procedure also checks the pending
+ * machine check bit and pending INIT bit and reports their states.
+ */
+static inline s64
+ia64_pal_mc_clear_log (u64 *pending_vector)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_CLEAR_LOG, 0, 0, 0);
+	if (pending_vector)
+		*pending_vector = iprv.v0;
+	return iprv.status;
+}
+
+/* Ensure that all outstanding transactions in a processor are completed or that any
+ * MCA due to thes outstanding transaction is taken.
+ */
+static inline s64
+ia64_pal_mc_drain (void)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_DRAIN, 0, 0, 0);
+	return iprv.status;
+}
+
+/* Return the machine check dynamic processor state */
+static inline s64
+ia64_pal_mc_dynamic_state (u64 info_type, u64 dy_buffer, u64 *size)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_DYNAMIC_STATE, info_type, dy_buffer, 0);
+	if (size)
+		*size = iprv.v0;
+	return iprv.status;
+}
+
+/* Return processor machine check information */
+static inline s64
+ia64_pal_mc_error_info (u64 info_index, u64 type_index, u64 *size, u64 *error_info)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_ERROR_INFO, info_index, type_index, 0);
+	if (size)
+		*size = iprv.v0;
+	if (error_info)
+		*error_info = iprv.v1;
+	return iprv.status;
+}
+
+/* Injects the requested processor error or returns info on
+ * supported injection capabilities for current processor implementation
+ */
+static inline s64
+ia64_pal_mc_error_inject_phys (u64 err_type_info, u64 err_struct_info,
+			u64 err_data_buffer, u64 *capabilities, u64 *resources)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS_STK(iprv, PAL_MC_ERROR_INJECT, err_type_info,
+			  err_struct_info, err_data_buffer);
+	if (capabilities)
+		*capabilities= iprv.v0;
+	if (resources)
+		*resources= iprv.v1;
+	return iprv.status;
+}
+
+static inline s64
+ia64_pal_mc_error_inject_virt (u64 err_type_info, u64 err_struct_info,
+			u64 err_data_buffer, u64 *capabilities, u64 *resources)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_STK(iprv, PAL_MC_ERROR_INJECT, err_type_info,
+			  err_struct_info, err_data_buffer);
+	if (capabilities)
+		*capabilities= iprv.v0;
+	if (resources)
+		*resources= iprv.v1;
+	return iprv.status;
+}
+
+/* Inform PALE_CHECK whether a machine check is expected so that PALE_CHECK willnot
+ * attempt to correct any expected machine checks.
+ */
+static inline s64
+ia64_pal_mc_expected (u64 expected, u64 *previous)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_EXPECTED, expected, 0, 0);
+	if (previous)
+		*previous = iprv.v0;
+	return iprv.status;
+}
+
+typedef union pal_hw_tracking_u {
+	u64			pht_data;
+	struct {
+		u64		itc	:4,	/* Instruction cache tracking */
+				dct	:4,	/* Date cache tracking */
+				itt	:4,	/* Instruction TLB tracking */
+				ddt	:4,	/* Data TLB tracking */
+				reserved:48;
+	} pal_hw_tracking_s;
+} pal_hw_tracking_u_t;
+
+/*
+ * Hardware tracking status.
+ */
+static inline s64
+ia64_pal_mc_hw_tracking (u64 *status)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_HW_TRACKING, 0, 0, 0);
+	if (status)
+		*status = iprv.v0;
+	return iprv.status;
+}
+
+/* Register a platform dependent location with PAL to which it can save
+ * minimal processor state in the event of a machine check or initialization
+ * event.
+ */
+static inline s64
+ia64_pal_mc_register_mem (u64 physical_addr, u64 size, u64 *req_size)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_REGISTER_MEM, physical_addr, size, 0);
+	if (req_size)
+		*req_size = iprv.v0;
+	return iprv.status;
+}
+
+/* Restore minimal architectural processor state, set CMC interrupt if necessary
+ * and resume execution
+ */
+static inline s64
+ia64_pal_mc_resume (u64 set_cmci, u64 save_ptr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MC_RESUME, set_cmci, save_ptr, 0);
+	return iprv.status;
+}
+
+/* Return the memory attributes implemented by the processor */
+static inline s64
+ia64_pal_mem_attrib (u64 *mem_attrib)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MEM_ATTRIB, 0, 0, 0);
+	if (mem_attrib)
+		*mem_attrib = iprv.v0 & 0xff;
+	return iprv.status;
+}
+
+/* Return the amount of memory needed for second phase of processor
+ * self-test and the required alignment of memory.
+ */
+static inline s64
+ia64_pal_mem_for_test (u64 *bytes_needed, u64 *alignment)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_MEM_FOR_TEST, 0, 0, 0);
+	if (bytes_needed)
+		*bytes_needed = iprv.v0;
+	if (alignment)
+		*alignment = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_perf_mon_info_u {
+	u64			  ppmi_data;
+	struct {
+	       u64		generic		: 8,
+				width		: 8,
+				cycles		: 8,
+				retired		: 8,
+				reserved	: 32;
+	} pal_perf_mon_info_s;
+} pal_perf_mon_info_u_t;
+
+/* Return the performance monitor information about what can be counted
+ * and how to configure the monitors to count the desired events.
+ */
+static inline s64
+ia64_pal_perf_mon_info (u64 *pm_buffer, pal_perf_mon_info_u_t *pm_info)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_PERF_MON_INFO, (unsigned long) pm_buffer, 0, 0);
+	if (pm_info)
+		pm_info->ppmi_data = iprv.v0;
+	return iprv.status;
+}
+
+/* Specifies the physical address of the processor interrupt block
+ * and I/O port space.
+ */
+static inline s64
+ia64_pal_platform_addr (u64 type, u64 physical_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_PLATFORM_ADDR, type, physical_addr, 0);
+	return iprv.status;
+}
+
+/* Set the SAL PMI entrypoint in memory */
+static inline s64
+ia64_pal_pmi_entrypoint (u64 sal_pmi_entry_addr)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_PMI_ENTRYPOINT, sal_pmi_entry_addr, 0, 0);
+	return iprv.status;
+}
+
+struct pal_features_s;
+/* Provide information about configurable processor features */
+static inline s64
+ia64_pal_proc_get_features (u64 *features_avail,
+			    u64 *features_status,
+			    u64 *features_control,
+			    u64 features_set)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_PROC_GET_FEATURES, 0, features_set, 0);
+	if (iprv.status == 0) {
+		*features_avail   = iprv.v0;
+		*features_status  = iprv.v1;
+		*features_control = iprv.v2;
+	}
+	return iprv.status;
+}
+
+/* Enable/disable processor dependent features */
+static inline s64
+ia64_pal_proc_set_features (u64 feature_select)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_PROC_SET_FEATURES, feature_select, 0, 0);
+	return iprv.status;
+}
+
+/*
+ * Put everything in a struct so we avoid the global offset table whenever
+ * possible.
+ */
+typedef struct ia64_ptce_info_s {
+	u64		base;
+	u32		count[2];
+	u32		stride[2];
+} ia64_ptce_info_t;
+
+/* Return the information required for the architected loop used to purge
+ * (initialize) the entire TC
+ */
+static inline s64
+ia64_get_ptce (ia64_ptce_info_t *ptce)
+{
+	struct ia64_pal_retval iprv;
+
+	if (!ptce)
+		return -1;
+
+	PAL_CALL(iprv, PAL_PTCE_INFO, 0, 0, 0);
+	if (iprv.status == 0) {
+		ptce->base = iprv.v0;
+		ptce->count[0] = iprv.v1 >> 32;
+		ptce->count[1] = iprv.v1 & 0xffffffff;
+		ptce->stride[0] = iprv.v2 >> 32;
+		ptce->stride[1] = iprv.v2 & 0xffffffff;
+	}
+	return iprv.status;
+}
+
+/* Return info about implemented application and control registers. */
+static inline s64
+ia64_pal_register_info (u64 info_request, u64 *reg_info_1, u64 *reg_info_2)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_REGISTER_INFO, info_request, 0, 0);
+	if (reg_info_1)
+		*reg_info_1 = iprv.v0;
+	if (reg_info_2)
+		*reg_info_2 = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_hints_u {
+	u64			ph_data;
+	struct {
+	       u64		si		: 1,
+				li		: 1,
+				reserved	: 62;
+	} pal_hints_s;
+} pal_hints_u_t;
+
+/* Return information about the register stack and RSE for this processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_rse_info (u64 *num_phys_stacked, pal_hints_u_t *hints)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_RSE_INFO, 0, 0, 0);
+	if (num_phys_stacked)
+		*num_phys_stacked = iprv.v0;
+	if (hints)
+		hints->ph_data = iprv.v1;
+	return iprv.status;
+}
+
+/*
+ * Set the current hardware resource sharing policy of the processor
+ */
+static inline s64
+ia64_pal_set_hw_policy (u64 policy)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_SET_HW_POLICY, policy, 0, 0);
+	return iprv.status;
+}
+
+/* Cause the processor to enter	SHUTDOWN state, where prefetching and execution are
+ * suspended, but cause cache and TLB coherency to be maintained.
+ * This is usually called in IA-32 mode.
+ */
+static inline s64
+ia64_pal_shutdown (void)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_SHUTDOWN, 0, 0, 0);
+	return iprv.status;
+}
+
+/* Perform the second phase of processor self-test. */
+static inline s64
+ia64_pal_test_proc (u64 test_addr, u64 test_size, u64 attributes, u64 *self_test_state)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_TEST_PROC, test_addr, test_size, attributes);
+	if (self_test_state)
+		*self_test_state = iprv.v0;
+	return iprv.status;
+}
+
+typedef union  pal_version_u {
+	u64	pal_version_val;
+	struct {
+		u64	pv_pal_b_rev		:	8;
+		u64	pv_pal_b_model		:	8;
+		u64	pv_reserved1		:	8;
+		u64	pv_pal_vendor		:	8;
+		u64	pv_pal_a_rev		:	8;
+		u64	pv_pal_a_model		:	8;
+		u64	pv_reserved2		:	16;
+	} pal_version_s;
+} pal_version_u_t;
+
+
+/*
+ * Return PAL version information.  While the documentation states that
+ * PAL_VERSION can be called in either physical or virtual mode, some
+ * implementations only allow physical calls.  We don't call it very often,
+ * so the overhead isn't worth eliminating.
+ */
+static inline s64
+ia64_pal_version (pal_version_u_t *pal_min_version, pal_version_u_t *pal_cur_version)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS(iprv, PAL_VERSION, 0, 0, 0);
+	if (pal_min_version)
+		pal_min_version->pal_version_val = iprv.v0;
+
+	if (pal_cur_version)
+		pal_cur_version->pal_version_val = iprv.v1;
+
+	return iprv.status;
+}
+
+typedef union pal_tc_info_u {
+	u64			pti_val;
+	struct {
+	       u64		num_sets	:	8,
+				associativity	:	8,
+				num_entries	:	16,
+				pf		:	1,
+				unified		:	1,
+				reduce_tr	:	1,
+				reserved	:	29;
+	} pal_tc_info_s;
+} pal_tc_info_u_t;
+
+#define tc_reduce_tr		pal_tc_info_s.reduce_tr
+#define tc_unified		pal_tc_info_s.unified
+#define tc_pf			pal_tc_info_s.pf
+#define tc_num_entries		pal_tc_info_s.num_entries
+#define tc_associativity	pal_tc_info_s.associativity
+#define tc_num_sets		pal_tc_info_s.num_sets
+
+
+/* Return information about the virtual memory characteristics of the processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_vm_info (u64 tc_level, u64 tc_type,  pal_tc_info_u_t *tc_info, u64 *tc_pages)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_VM_INFO, tc_level, tc_type, 0);
+	if (tc_info)
+		tc_info->pti_val = iprv.v0;
+	if (tc_pages)
+		*tc_pages = iprv.v1;
+	return iprv.status;
+}
+
+/* Get page size information about the virtual memory characteristics of the processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_vm_page_size (u64 *tr_pages, u64 *vw_pages)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_VM_PAGE_SIZE, 0, 0, 0);
+	if (tr_pages)
+		*tr_pages = iprv.v0;
+	if (vw_pages)
+		*vw_pages = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_vm_info_1_u {
+	u64			pvi1_val;
+	struct {
+		u64		vw		: 1,
+				phys_add_size	: 7,
+				key_size	: 8,
+				max_pkr		: 8,
+				hash_tag_id	: 8,
+				max_dtr_entry	: 8,
+				max_itr_entry	: 8,
+				max_unique_tcs	: 8,
+				num_tc_levels	: 8;
+	} pal_vm_info_1_s;
+} pal_vm_info_1_u_t;
+
+#define PAL_MAX_PURGES		0xFFFF		/* all ones is means unlimited */
+
+typedef union pal_vm_info_2_u {
+	u64			pvi2_val;
+	struct {
+		u64		impl_va_msb	: 8,
+				rid_size	: 8,
+				max_purges	: 16,
+				reserved	: 32;
+	} pal_vm_info_2_s;
+} pal_vm_info_2_u_t;
+
+/* Get summary information about the virtual memory characteristics of the processor
+ * implementation.
+ */
+static inline s64
+ia64_pal_vm_summary (pal_vm_info_1_u_t *vm_info_1, pal_vm_info_2_u_t *vm_info_2)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_VM_SUMMARY, 0, 0, 0);
+	if (vm_info_1)
+		vm_info_1->pvi1_val = iprv.v0;
+	if (vm_info_2)
+		vm_info_2->pvi2_val = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_vp_info_u {
+	u64			pvi_val;
+	struct {
+		u64		index:		48,	/* virtual feature set info */
+				vmm_id:		16;	/* feature set id */
+	} pal_vp_info_s;
+} pal_vp_info_u_t;
+
+/*
+ * Returns infomation about virtual processor features
+ */
+static inline s64
+ia64_pal_vp_info (u64 feature_set, u64 vp_buffer, u64 *vp_info, u64 *vmm_id)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_VP_INFO, feature_set, vp_buffer, 0);
+	if (vp_info)
+		*vp_info = iprv.v0;
+	if (vmm_id)
+		*vmm_id = iprv.v1;
+	return iprv.status;
+}
+
+typedef union pal_itr_valid_u {
+	u64			piv_val;
+	struct {
+	       u64		access_rights_valid	: 1,
+				priv_level_valid	: 1,
+				dirty_bit_valid		: 1,
+				mem_attr_valid		: 1,
+				reserved		: 60;
+	} pal_tr_valid_s;
+} pal_tr_valid_u_t;
+
+/* Read a translation register */
+static inline s64
+ia64_pal_tr_read (u64 reg_num, u64 tr_type, u64 *tr_buffer, pal_tr_valid_u_t *tr_valid)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL_PHYS_STK(iprv, PAL_VM_TR_READ, reg_num, tr_type,(u64)ia64_tpa(tr_buffer));
+	if (tr_valid)
+		tr_valid->piv_val = iprv.v0;
+	return iprv.status;
+}
+
+/*
+ * PAL_PREFETCH_VISIBILITY transaction types
+ */
+#define PAL_VISIBILITY_VIRTUAL		0
+#define PAL_VISIBILITY_PHYSICAL		1
+
+/*
+ * PAL_PREFETCH_VISIBILITY return codes
+ */
+#define PAL_VISIBILITY_OK		1
+#define PAL_VISIBILITY_OK_REMOTE_NEEDED	0
+#define PAL_VISIBILITY_INVAL_ARG	-2
+#define PAL_VISIBILITY_ERROR		-3
+
+static inline s64
+ia64_pal_prefetch_visibility (s64 trans_type)
+{
+	struct ia64_pal_retval iprv;
+	PAL_CALL(iprv, PAL_PREFETCH_VISIBILITY, trans_type, 0, 0);
+	return iprv.status;
+}
+
+/* data structure for getting information on logical to physical mappings */
+typedef union pal_log_overview_u {
+	struct {
+		u64	num_log		:16,	/* Total number of logical
+						 * processors on this die
+						 */
+			tpc		:8,	/* Threads per core */
+			reserved3	:8,	/* Reserved */
+			cpp		:8,	/* Cores per processor */
+			reserved2	:8,	/* Reserved */
+			ppid		:8,	/* Physical processor ID */
+			reserved1	:8;	/* Reserved */
+	} overview_bits;
+	u64 overview_data;
+} pal_log_overview_t;
+
+typedef union pal_proc_n_log_info1_u{
+	struct {
+		u64	tid		:16,	/* Thread id */
+			reserved2	:16,	/* Reserved */
+			cid		:16,	/* Core id */
+			reserved1	:16;	/* Reserved */
+	} ppli1_bits;
+	u64	ppli1_data;
+} pal_proc_n_log_info1_t;
+
+typedef union pal_proc_n_log_info2_u {
+	struct {
+		u64	la		:16,	/* Logical address */
+			reserved	:48;	/* Reserved */
+	} ppli2_bits;
+	u64	ppli2_data;
+} pal_proc_n_log_info2_t;
+
+typedef struct pal_logical_to_physical_s
+{
+	pal_log_overview_t overview;
+	pal_proc_n_log_info1_t ppli1;
+	pal_proc_n_log_info2_t ppli2;
+} pal_logical_to_physical_t;
+
+#define overview_num_log	overview.overview_bits.num_log
+#define overview_tpc		overview.overview_bits.tpc
+#define overview_cpp		overview.overview_bits.cpp
+#define overview_ppid		overview.overview_bits.ppid
+#define log1_tid		ppli1.ppli1_bits.tid
+#define log1_cid		ppli1.ppli1_bits.cid
+#define log2_la			ppli2.ppli2_bits.la
+
+/* Get information on logical to physical processor mappings. */
+static inline s64
+ia64_pal_logical_to_phys(u64 proc_number, pal_logical_to_physical_t *mapping)
+{
+	struct ia64_pal_retval iprv;
+
+	PAL_CALL(iprv, PAL_LOGICAL_TO_PHYSICAL, proc_number, 0, 0);
+
+	if (iprv.status == PAL_STATUS_SUCCESS)
+	{
+		mapping->overview.overview_data = iprv.v0;
+		mapping->ppli1.ppli1_data = iprv.v1;
+		mapping->ppli2.ppli2_data = iprv.v2;
+	}
+
+	return iprv.status;
+}
+
+typedef struct pal_cache_shared_info_s
+{
+	u64 num_shared;
+	pal_proc_n_log_info1_t ppli1;
+	pal_proc_n_log_info2_t ppli2;
+} pal_cache_shared_info_t;
+
+/* Get information on logical to physical processor mappings. */
+static inline s64
+ia64_pal_cache_shared_info(u64 level,
+		u64 type,
+		u64 proc_number,
+		pal_cache_shared_info_t *info)
+{
+	struct ia64_pal_retval iprv;
+
+	PAL_CALL(iprv, PAL_CACHE_SHARED_INFO, level, type, proc_number);
+
+	if (iprv.status == PAL_STATUS_SUCCESS) {
+		info->num_shared = iprv.v0;
+		info->ppli1.ppli1_data = iprv.v1;
+		info->ppli2.ppli2_data = iprv.v2;
+	}
+
+	return iprv.status;
+}
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_PAL_H */
diff --git a/arch/ia64/include/asm/param.h b/arch/ia64/include/asm/param.h
new file mode 100644
index 000000000000..0964c32c1358
--- /dev/null
+++ b/arch/ia64/include/asm/param.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_IA64_PARAM_H
+#define _ASM_IA64_PARAM_H
+
+/*
+ * Fundamental kernel parameters.
+ *
+ * Based on <asm-i386/param.h>.
+ *
+ * Modified 1998, 1999, 2002-2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#define EXEC_PAGESIZE	65536
+
+#ifndef NOGROUP
+# define NOGROUP	(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ
+# define USER_HZ	HZ
+# define CLOCKS_PER_SEC	HZ	/* frequency at which times() counts */
+#else
+   /*
+    * Technically, this is wrong, but some old apps still refer to it.  The proper way to
+    * get the HZ value is via sysconf(_SC_CLK_TCK).
+    */
+# define HZ 1024
+#endif
+
+#endif /* _ASM_IA64_PARAM_H */
diff --git a/arch/ia64/include/asm/paravirt.h b/arch/ia64/include/asm/paravirt.h
new file mode 100644
index 000000000000..660cab044834
--- /dev/null
+++ b/arch/ia64/include/asm/paravirt.h
@@ -0,0 +1,253 @@
+/******************************************************************************
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+
+#ifndef __ASM_PARAVIRT_H
+#define __ASM_PARAVIRT_H
+
+#ifdef CONFIG_PARAVIRT_GUEST
+
+#define PARAVIRT_HYPERVISOR_TYPE_DEFAULT	0
+#define PARAVIRT_HYPERVISOR_TYPE_XEN		1
+
+#ifndef __ASSEMBLY__
+
+#include <asm/hw_irq.h>
+#include <asm/meminit.h>
+
+/******************************************************************************
+ * general info
+ */
+struct pv_info {
+	unsigned int kernel_rpl;
+	int paravirt_enabled;
+	const char *name;
+};
+
+extern struct pv_info pv_info;
+
+static inline int paravirt_enabled(void)
+{
+	return pv_info.paravirt_enabled;
+}
+
+static inline unsigned int get_kernel_rpl(void)
+{
+	return pv_info.kernel_rpl;
+}
+
+/******************************************************************************
+ * initialization hooks.
+ */
+struct rsvd_region;
+
+struct pv_init_ops {
+	void (*banner)(void);
+
+	int (*reserve_memory)(struct rsvd_region *region);
+
+	void (*arch_setup_early)(void);
+	void (*arch_setup_console)(char **cmdline_p);
+	int (*arch_setup_nomca)(void);
+
+	void (*post_smp_prepare_boot_cpu)(void);
+};
+
+extern struct pv_init_ops pv_init_ops;
+
+static inline void paravirt_banner(void)
+{
+	if (pv_init_ops.banner)
+		pv_init_ops.banner();
+}
+
+static inline int paravirt_reserve_memory(struct rsvd_region *region)
+{
+	if (pv_init_ops.reserve_memory)
+		return pv_init_ops.reserve_memory(region);
+	return 0;
+}
+
+static inline void paravirt_arch_setup_early(void)
+{
+	if (pv_init_ops.arch_setup_early)
+		pv_init_ops.arch_setup_early();
+}
+
+static inline void paravirt_arch_setup_console(char **cmdline_p)
+{
+	if (pv_init_ops.arch_setup_console)
+		pv_init_ops.arch_setup_console(cmdline_p);
+}
+
+static inline int paravirt_arch_setup_nomca(void)
+{
+	if (pv_init_ops.arch_setup_nomca)
+		return pv_init_ops.arch_setup_nomca();
+	return 0;
+}
+
+static inline void paravirt_post_smp_prepare_boot_cpu(void)
+{
+	if (pv_init_ops.post_smp_prepare_boot_cpu)
+		pv_init_ops.post_smp_prepare_boot_cpu();
+}
+
+/******************************************************************************
+ * replacement of iosapic operations.
+ */
+
+struct pv_iosapic_ops {
+	void (*pcat_compat_init)(void);
+
+	struct irq_chip *(*get_irq_chip)(unsigned long trigger);
+
+	unsigned int (*__read)(char __iomem *iosapic, unsigned int reg);
+	void (*__write)(char __iomem *iosapic, unsigned int reg, u32 val);
+};
+
+extern struct pv_iosapic_ops pv_iosapic_ops;
+
+static inline void
+iosapic_pcat_compat_init(void)
+{
+	if (pv_iosapic_ops.pcat_compat_init)
+		pv_iosapic_ops.pcat_compat_init();
+}
+
+static inline struct irq_chip*
+iosapic_get_irq_chip(unsigned long trigger)
+{
+	return pv_iosapic_ops.get_irq_chip(trigger);
+}
+
+static inline unsigned int
+__iosapic_read(char __iomem *iosapic, unsigned int reg)
+{
+	return pv_iosapic_ops.__read(iosapic, reg);
+}
+
+static inline void
+__iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
+{
+	return pv_iosapic_ops.__write(iosapic, reg, val);
+}
+
+/******************************************************************************
+ * replacement of irq operations.
+ */
+
+struct pv_irq_ops {
+	void (*register_ipi)(void);
+
+	int (*assign_irq_vector)(int irq);
+	void (*free_irq_vector)(int vector);
+
+	void (*register_percpu_irq)(ia64_vector vec,
+				    struct irqaction *action);
+
+	void (*resend_irq)(unsigned int vector);
+};
+
+extern struct pv_irq_ops pv_irq_ops;
+
+static inline void
+ia64_register_ipi(void)
+{
+	pv_irq_ops.register_ipi();
+}
+
+static inline int
+assign_irq_vector(int irq)
+{
+	return pv_irq_ops.assign_irq_vector(irq);
+}
+
+static inline void
+free_irq_vector(int vector)
+{
+	return pv_irq_ops.free_irq_vector(vector);
+}
+
+static inline void
+register_percpu_irq(ia64_vector vec, struct irqaction *action)
+{
+	pv_irq_ops.register_percpu_irq(vec, action);
+}
+
+static inline void
+ia64_resend_irq(unsigned int vector)
+{
+	pv_irq_ops.resend_irq(vector);
+}
+
+/******************************************************************************
+ * replacement of time operations.
+ */
+
+extern struct itc_jitter_data_t itc_jitter_data;
+extern volatile int time_keeper_id;
+
+struct pv_time_ops {
+	void (*init_missing_ticks_accounting)(int cpu);
+	int (*do_steal_accounting)(unsigned long *new_itm);
+
+	void (*clocksource_resume)(void);
+};
+
+extern struct pv_time_ops pv_time_ops;
+
+static inline void
+paravirt_init_missing_ticks_accounting(int cpu)
+{
+	if (pv_time_ops.init_missing_ticks_accounting)
+		pv_time_ops.init_missing_ticks_accounting(cpu);
+}
+
+static inline int
+paravirt_do_steal_accounting(unsigned long *new_itm)
+{
+	return pv_time_ops.do_steal_accounting(new_itm);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else
+/* fallback for native case */
+
+#ifndef __ASSEMBLY__
+
+#define paravirt_banner()				do { } while (0)
+#define paravirt_reserve_memory(region)			0
+
+#define paravirt_arch_setup_early()			do { } while (0)
+#define paravirt_arch_setup_console(cmdline_p)		do { } while (0)
+#define paravirt_arch_setup_nomca()			0
+#define paravirt_post_smp_prepare_boot_cpu()		do { } while (0)
+
+#define paravirt_init_missing_ticks_accounting(cpu)	do { } while (0)
+#define paravirt_do_steal_accounting(new_itm)		0
+
+#endif /* __ASSEMBLY__ */
+
+
+#endif /* CONFIG_PARAVIRT_GUEST */
+
+#endif /* __ASM_PARAVIRT_H */
diff --git a/arch/ia64/include/asm/paravirt_privop.h b/arch/ia64/include/asm/paravirt_privop.h
new file mode 100644
index 000000000000..d577aac11835
--- /dev/null
+++ b/arch/ia64/include/asm/paravirt_privop.h
@@ -0,0 +1,112 @@
+/******************************************************************************
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef _ASM_IA64_PARAVIRT_PRIVOP_H
+#define _ASM_IA64_PARAVIRT_PRIVOP_H
+
+#ifdef CONFIG_PARAVIRT
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <asm/kregs.h> /* for IA64_PSR_I */
+
+/******************************************************************************
+ * replacement of intrinsics operations.
+ */
+
+struct pv_cpu_ops {
+	void (*fc)(unsigned long addr);
+	unsigned long (*thash)(unsigned long addr);
+	unsigned long (*get_cpuid)(int index);
+	unsigned long (*get_pmd)(int index);
+	unsigned long (*getreg)(int reg);
+	void (*setreg)(int reg, unsigned long val);
+	void (*ptcga)(unsigned long addr, unsigned long size);
+	unsigned long (*get_rr)(unsigned long index);
+	void (*set_rr)(unsigned long index, unsigned long val);
+	void (*set_rr0_to_rr4)(unsigned long val0, unsigned long val1,
+			       unsigned long val2, unsigned long val3,
+			       unsigned long val4);
+	void (*ssm_i)(void);
+	void (*rsm_i)(void);
+	unsigned long (*get_psr_i)(void);
+	void (*intrin_local_irq_restore)(unsigned long flags);
+};
+
+extern struct pv_cpu_ops pv_cpu_ops;
+
+extern void ia64_native_setreg_func(int regnum, unsigned long val);
+extern unsigned long ia64_native_getreg_func(int regnum);
+
+/************************************************/
+/* Instructions paravirtualized for performance */
+/************************************************/
+
+/* mask for ia64_native_ssm/rsm() must be constant.("i" constraing).
+ * static inline function doesn't satisfy it. */
+#define paravirt_ssm(mask)			\
+	do {					\
+		if ((mask) == IA64_PSR_I)	\
+			pv_cpu_ops.ssm_i();	\
+		else				\
+			ia64_native_ssm(mask);	\
+	} while (0)
+
+#define paravirt_rsm(mask)			\
+	do {					\
+		if ((mask) == IA64_PSR_I)	\
+			pv_cpu_ops.rsm_i();	\
+		else				\
+			ia64_native_rsm(mask);	\
+	} while (0)
+
+/******************************************************************************
+ * replacement of hand written assembly codes.
+ */
+struct pv_cpu_asm_switch {
+	unsigned long switch_to;
+	unsigned long leave_syscall;
+	unsigned long work_processed_syscall;
+	unsigned long leave_kernel;
+};
+void paravirt_cpu_asm_init(const struct pv_cpu_asm_switch *cpu_asm_switch);
+
+#endif /* __ASSEMBLY__ */
+
+#define IA64_PARAVIRT_ASM_FUNC(name)	paravirt_ ## name
+
+#else
+
+/* fallback for native case */
+#define IA64_PARAVIRT_ASM_FUNC(name)	ia64_native_ ## name
+
+#endif /* CONFIG_PARAVIRT */
+
+/* these routines utilize privilege-sensitive or performance-sensitive
+ * privileged instructions so the code must be replaced with
+ * paravirtualized versions */
+#define ia64_switch_to			IA64_PARAVIRT_ASM_FUNC(switch_to)
+#define ia64_leave_syscall		IA64_PARAVIRT_ASM_FUNC(leave_syscall)
+#define ia64_work_processed_syscall	\
+	IA64_PARAVIRT_ASM_FUNC(work_processed_syscall)
+#define ia64_leave_kernel		IA64_PARAVIRT_ASM_FUNC(leave_kernel)
+
+#endif /* _ASM_IA64_PARAVIRT_PRIVOP_H */
diff --git a/arch/ia64/include/asm/parport.h b/arch/ia64/include/asm/parport.h
new file mode 100644
index 000000000000..67e16adfcd25
--- /dev/null
+++ b/arch/ia64/include/asm/parport.h
@@ -0,0 +1,20 @@
+/*
+ * parport.h: platform-specific PC-style parport initialisation
+ *
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef _ASM_IA64_PARPORT_H
+#define _ASM_IA64_PARPORT_H 1
+
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+
+static int __devinit
+parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports(autoirq, autodma);
+}
+
+#endif /* _ASM_IA64_PARPORT_H */
diff --git a/arch/ia64/include/asm/patch.h b/arch/ia64/include/asm/patch.h
new file mode 100644
index 000000000000..295fe6ab4584
--- /dev/null
+++ b/arch/ia64/include/asm/patch.h
@@ -0,0 +1,27 @@
+#ifndef _ASM_IA64_PATCH_H
+#define _ASM_IA64_PATCH_H
+
+/*
+ * Copyright (C) 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * There are a number of reasons for patching instructions.  Rather than duplicating code
+ * all over the place, we put the common stuff here.  Reasons for patching: in-kernel
+ * module-loader, virtual-to-physical patch-list, McKinley Errata 9 workaround, and gate
+ * shared library.  Undoubtedly, some of these reasons will disappear and others will
+ * be added over time.
+ */
+#include <linux/elf.h>
+#include <linux/types.h>
+
+extern void ia64_patch (u64 insn_addr, u64 mask, u64 val);	/* patch any insn slot */
+extern void ia64_patch_imm64 (u64 insn_addr, u64 val);		/* patch "movl" w/abs. value*/
+extern void ia64_patch_imm60 (u64 insn_addr, u64 val);		/* patch "brl" w/ip-rel value */
+
+extern void ia64_patch_mckinley_e9 (unsigned long start, unsigned long end);
+extern void ia64_patch_vtop (unsigned long start, unsigned long end);
+extern void ia64_patch_phys_stack_reg(unsigned long val);
+extern void ia64_patch_rse (unsigned long start, unsigned long end);
+extern void ia64_patch_gate (void);
+
+#endif /* _ASM_IA64_PATCH_H */
diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h
new file mode 100644
index 000000000000..0149097b736d
--- /dev/null
+++ b/arch/ia64/include/asm/pci.h
@@ -0,0 +1,167 @@
+#ifndef _ASM_IA64_PCI_H
+#define _ASM_IA64_PCI_H
+
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <asm/io.h>
+#include <asm/scatterlist.h>
+#include <asm/hw_irq.h>
+
+/*
+ * Can be used to override the logic in pci_scan_bus for skipping already-configured bus
+ * numbers - to be used for buggy BIOSes or architectures with incomplete PCI setup by the
+ * loader.
+ */
+#define pcibios_assign_all_busses()     0
+#define pcibios_scan_all_fns(a, b)	0
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		0x10000000
+
+void pcibios_config_init(void);
+
+struct pci_dev;
+
+/*
+ * PCI_DMA_BUS_IS_PHYS should be set to 1 if there is _necessarily_ a direct
+ * correspondence between device bus addresses and CPU physical addresses.
+ * Platforms with a hardware I/O MMU _must_ turn this off to suppress the
+ * bounce buffer handling code in the block and network device layers.
+ * Platforms with separate bus address spaces _must_ turn this off and provide
+ * a device DMA mapping implementation that takes care of the necessary
+ * address translation.
+ *
+ * For now, the ia64 platforms which may have separate/multiple bus address
+ * spaces all have I/O MMUs which support the merging of physically
+ * discontiguous buffers, so we can use that as the sole factor to determine
+ * the setting of PCI_DMA_BUS_IS_PHYS.
+ */
+extern unsigned long ia64_max_iommu_merge_mask;
+#define PCI_DMA_BUS_IS_PHYS	(ia64_max_iommu_merge_mask == ~0UL)
+
+static inline void
+pcibios_set_master (struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void
+pcibios_penalize_isa_irq (int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+#include <asm-generic/pci-dma-compat.h>
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_MULTIPLE;
+	*strategy_parameter = cacheline_size;
+}
+#endif
+
+#define HAVE_PCI_MMAP
+extern int pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
+				enum pci_mmap_state mmap_state, int write_combine);
+#define HAVE_PCI_LEGACY
+extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
+				      struct vm_area_struct *vma);
+extern ssize_t pci_read_legacy_io(struct kobject *kobj,
+				  struct bin_attribute *bin_attr,
+				  char *buf, loff_t off, size_t count);
+extern ssize_t pci_write_legacy_io(struct kobject *kobj,
+				   struct bin_attribute *bin_attr,
+				   char *buf, loff_t off, size_t count);
+extern int pci_mmap_legacy_mem(struct kobject *kobj,
+			       struct bin_attribute *attr,
+			       struct vm_area_struct *vma);
+
+#define pci_get_legacy_mem platform_pci_get_legacy_mem
+#define pci_legacy_read platform_pci_legacy_read
+#define pci_legacy_write platform_pci_legacy_write
+
+struct pci_window {
+	struct resource resource;
+	u64 offset;
+};
+
+struct pci_controller {
+	void *acpi_handle;
+	void *iommu;
+	int segment;
+	int node;		/* nearest node with memory or -1 for global allocation */
+
+	unsigned int windows;
+	struct pci_window *window;
+
+	void *platform_data;
+};
+
+#define PCI_CONTROLLER(busdev) ((struct pci_controller *) busdev->sysdata)
+#define pci_domain_nr(busdev)    (PCI_CONTROLLER(busdev)->segment)
+
+extern struct pci_ops pci_root_ops;
+
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return (pci_domain_nr(bus) != 0);
+}
+
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+		struct pci_bus_region *region, struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+		struct resource *res, struct pci_bus_region *region);
+
+static inline struct resource *
+pcibios_select_root(struct pci_dev *pdev, struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+#define pcibios_scan_all_fns(a, b)	0
+
+#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return channel ? isa_irq_to_vector(15) : isa_irq_to_vector(14);
+}
+
+#endif /* _ASM_IA64_PCI_H */
diff --git a/arch/ia64/include/asm/percpu.h b/arch/ia64/include/asm/percpu.h
new file mode 100644
index 000000000000..77f30b664b4e
--- /dev/null
+++ b/arch/ia64/include/asm/percpu.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_IA64_PERCPU_H
+#define _ASM_IA64_PERCPU_H
+
+/*
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#define PERCPU_ENOUGH_ROOM PERCPU_PAGE_SIZE
+
+#ifdef __ASSEMBLY__
+# define THIS_CPU(var)	(per_cpu__##var)  /* use this to mark accesses to per-CPU variables... */
+#else /* !__ASSEMBLY__ */
+
+
+#include <linux/threads.h>
+
+#ifdef CONFIG_SMP
+
+#ifdef HAVE_MODEL_SMALL_ATTRIBUTE
+# define PER_CPU_ATTRIBUTES	__attribute__((__model__ (__small__)))
+#endif
+
+#define __my_cpu_offset	__ia64_per_cpu_var(local_per_cpu_offset)
+
+extern void *per_cpu_init(void);
+
+#else /* ! SMP */
+
+#define PER_CPU_ATTRIBUTES	__attribute__((__section__(".data.percpu")))
+
+#define per_cpu_init()				(__phys_per_cpu_start)
+
+#endif	/* SMP */
+
+/*
+ * Be extremely careful when taking the address of this variable!  Due to virtual
+ * remapping, it is different from the canonical address returned by __get_cpu_var(var)!
+ * On the positive side, using __ia64_per_cpu_var() instead of __get_cpu_var() is slightly
+ * more efficient.
+ */
+#define __ia64_per_cpu_var(var)	per_cpu__##var
+
+#include <asm-generic/percpu.h>
+
+/* Equal to __per_cpu_offset[smp_processor_id()], but faster to access: */
+DECLARE_PER_CPU(unsigned long, local_per_cpu_offset);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_PERCPU_H */
diff --git a/arch/ia64/include/asm/perfmon.h b/arch/ia64/include/asm/perfmon.h
new file mode 100644
index 000000000000..7f3333dd00e4
--- /dev/null
+++ b/arch/ia64/include/asm/perfmon.h
@@ -0,0 +1,279 @@
+/*
+ * Copyright (C) 2001-2003 Hewlett-Packard Co
+ *               Stephane Eranian <eranian@hpl.hp.com>
+ */
+
+#ifndef _ASM_IA64_PERFMON_H
+#define _ASM_IA64_PERFMON_H
+
+/*
+ * perfmon comamnds supported on all CPU models
+ */
+#define PFM_WRITE_PMCS		0x01
+#define PFM_WRITE_PMDS		0x02
+#define PFM_READ_PMDS		0x03
+#define PFM_STOP		0x04
+#define PFM_START		0x05
+#define PFM_ENABLE		0x06 /* obsolete */
+#define PFM_DISABLE		0x07 /* obsolete */
+#define PFM_CREATE_CONTEXT	0x08
+#define PFM_DESTROY_CONTEXT	0x09 /* obsolete use close() */
+#define PFM_RESTART		0x0a
+#define PFM_PROTECT_CONTEXT	0x0b /* obsolete */
+#define PFM_GET_FEATURES	0x0c
+#define PFM_DEBUG		0x0d
+#define PFM_UNPROTECT_CONTEXT	0x0e /* obsolete */
+#define PFM_GET_PMC_RESET_VAL	0x0f
+#define PFM_LOAD_CONTEXT	0x10
+#define PFM_UNLOAD_CONTEXT	0x11
+
+/*
+ * PMU model specific commands (may not be supported on all PMU models)
+ */
+#define PFM_WRITE_IBRS		0x20
+#define PFM_WRITE_DBRS		0x21
+
+/*
+ * context flags
+ */
+#define PFM_FL_NOTIFY_BLOCK    	 0x01	/* block task on user level notifications */
+#define PFM_FL_SYSTEM_WIDE	 0x02	/* create a system wide context */
+#define PFM_FL_OVFL_NO_MSG	 0x80   /* do not post overflow/end messages for notification */
+
+/*
+ * event set flags
+ */
+#define PFM_SETFL_EXCL_IDLE      0x01   /* exclude idle task (syswide only) XXX: DO NOT USE YET */
+
+/*
+ * PMC flags
+ */
+#define PFM_REGFL_OVFL_NOTIFY	0x1	/* send notification on overflow */
+#define PFM_REGFL_RANDOM	0x2	/* randomize sampling interval   */
+
+/*
+ * PMD/PMC/IBR/DBR return flags (ignored on input)
+ *
+ * Those flags are used on output and must be checked in case EAGAIN is returned
+ * by any of the calls using a pfarg_reg_t or pfarg_dbreg_t structure.
+ */
+#define PFM_REG_RETFL_NOTAVAIL	(1UL<<31) /* set if register is implemented but not available */
+#define PFM_REG_RETFL_EINVAL	(1UL<<30) /* set if register entry is invalid */
+#define PFM_REG_RETFL_MASK	(PFM_REG_RETFL_NOTAVAIL|PFM_REG_RETFL_EINVAL)
+
+#define PFM_REG_HAS_ERROR(flag)	(((flag) & PFM_REG_RETFL_MASK) != 0)
+
+typedef unsigned char pfm_uuid_t[16];	/* custom sampling buffer identifier type */
+
+/*
+ * Request structure used to define a context
+ */
+typedef struct {
+	pfm_uuid_t     ctx_smpl_buf_id;	 /* which buffer format to use (if needed) */
+	unsigned long  ctx_flags;	 /* noblock/block */
+	unsigned short ctx_nextra_sets;	 /* number of extra event sets (you always get 1) */
+	unsigned short ctx_reserved1;	 /* for future use */
+	int	       ctx_fd;		 /* return arg: unique identification for context */
+	void	       *ctx_smpl_vaddr;	 /* return arg: virtual address of sampling buffer, is used */
+	unsigned long  ctx_reserved2[11];/* for future use */
+} pfarg_context_t;
+
+/*
+ * Request structure used to write/read a PMC or PMD
+ */
+typedef struct {
+	unsigned int	reg_num;	   /* which register */
+	unsigned short	reg_set;	   /* event set for this register */
+	unsigned short	reg_reserved1;	   /* for future use */
+
+	unsigned long	reg_value;	   /* initial pmc/pmd value */
+	unsigned long	reg_flags;	   /* input: pmc/pmd flags, return: reg error */
+
+	unsigned long	reg_long_reset;	   /* reset after buffer overflow notification */
+	unsigned long	reg_short_reset;   /* reset after counter overflow */
+
+	unsigned long	reg_reset_pmds[4]; /* which other counters to reset on overflow */
+	unsigned long	reg_random_seed;   /* seed value when randomization is used */
+	unsigned long	reg_random_mask;   /* bitmask used to limit random value */
+	unsigned long   reg_last_reset_val;/* return: PMD last reset value */
+
+	unsigned long	reg_smpl_pmds[4];  /* which pmds are accessed when PMC overflows */
+	unsigned long	reg_smpl_eventid;  /* opaque sampling event identifier */
+
+	unsigned long   reg_reserved2[3];   /* for future use */
+} pfarg_reg_t;
+
+typedef struct {
+	unsigned int	dbreg_num;		/* which debug register */
+	unsigned short	dbreg_set;		/* event set for this register */
+	unsigned short	dbreg_reserved1;	/* for future use */
+	unsigned long	dbreg_value;		/* value for debug register */
+	unsigned long	dbreg_flags;		/* return: dbreg error */
+	unsigned long	dbreg_reserved2[1];	/* for future use */
+} pfarg_dbreg_t;
+
+typedef struct {
+	unsigned int	ft_version;	/* perfmon: major [16-31], minor [0-15] */
+	unsigned int	ft_reserved;	/* reserved for future use */
+	unsigned long	reserved[4];	/* for future use */
+} pfarg_features_t;
+
+typedef struct {
+	pid_t		load_pid;	   /* process to load the context into */
+	unsigned short	load_set;	   /* first event set to load */
+	unsigned short	load_reserved1;	   /* for future use */
+	unsigned long	load_reserved2[3]; /* for future use */
+} pfarg_load_t;
+
+typedef struct {
+	int		msg_type;		/* generic message header */
+	int		msg_ctx_fd;		/* generic message header */
+	unsigned long	msg_ovfl_pmds[4];	/* which PMDs overflowed */
+	unsigned short  msg_active_set;		/* active set at the time of overflow */
+	unsigned short  msg_reserved1;		/* for future use */
+	unsigned int    msg_reserved2;		/* for future use */
+	unsigned long	msg_tstamp;		/* for perf tuning/debug */
+} pfm_ovfl_msg_t;
+
+typedef struct {
+	int		msg_type;		/* generic message header */
+	int		msg_ctx_fd;		/* generic message header */
+	unsigned long	msg_tstamp;		/* for perf tuning */
+} pfm_end_msg_t;
+
+typedef struct {
+	int		msg_type;		/* type of the message */
+	int		msg_ctx_fd;		/* unique identifier for the context */
+	unsigned long	msg_tstamp;		/* for perf tuning */
+} pfm_gen_msg_t;
+
+#define PFM_MSG_OVFL	1	/* an overflow happened */
+#define PFM_MSG_END	2	/* task to which context was attached ended */
+
+typedef union {
+	pfm_ovfl_msg_t	pfm_ovfl_msg;
+	pfm_end_msg_t	pfm_end_msg;
+	pfm_gen_msg_t	pfm_gen_msg;
+} pfm_msg_t;
+
+/*
+ * Define the version numbers for both perfmon as a whole and the sampling buffer format.
+ */
+#define PFM_VERSION_MAJ		 2U
+#define PFM_VERSION_MIN		 0U
+#define PFM_VERSION		 (((PFM_VERSION_MAJ&0xffff)<<16)|(PFM_VERSION_MIN & 0xffff))
+#define PFM_VERSION_MAJOR(x)	 (((x)>>16) & 0xffff)
+#define PFM_VERSION_MINOR(x)	 ((x) & 0xffff)
+
+
+/*
+ * miscellaneous architected definitions
+ */
+#define PMU_FIRST_COUNTER	4	/* first counting monitor (PMC/PMD) */
+#define PMU_MAX_PMCS		256	/* maximum architected number of PMC registers */
+#define PMU_MAX_PMDS		256	/* maximum architected number of PMD registers */
+
+#ifdef __KERNEL__
+
+extern long perfmonctl(int fd, int cmd, void *arg, int narg);
+
+typedef struct {
+	void (*handler)(int irq, void *arg, struct pt_regs *regs);
+} pfm_intr_handler_desc_t;
+
+extern void pfm_save_regs (struct task_struct *);
+extern void pfm_load_regs (struct task_struct *);
+
+extern void pfm_exit_thread(struct task_struct *);
+extern int  pfm_use_debug_registers(struct task_struct *);
+extern int  pfm_release_debug_registers(struct task_struct *);
+extern void pfm_syst_wide_update_task(struct task_struct *, unsigned long info, int is_ctxswin);
+extern void pfm_inherit(struct task_struct *task, struct pt_regs *regs);
+extern void pfm_init_percpu(void);
+extern void pfm_handle_work(void);
+extern int  pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *h);
+extern int  pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *h);
+
+
+
+/*
+ * Reset PMD register flags
+ */
+#define PFM_PMD_SHORT_RESET	0
+#define PFM_PMD_LONG_RESET	1
+
+typedef union {
+	unsigned int val;
+	struct {
+		unsigned int notify_user:1;	/* notify user program of overflow */
+		unsigned int reset_ovfl_pmds:1;	/* reset overflowed PMDs */
+		unsigned int block_task:1;	/* block monitored task on kernel exit */
+		unsigned int mask_monitoring:1; /* mask monitors via PMCx.plm */
+		unsigned int reserved:28;	/* for future use */
+	} bits;
+} pfm_ovfl_ctrl_t;
+
+typedef struct {
+	unsigned char	ovfl_pmd;			/* index of overflowed PMD  */
+	unsigned char   ovfl_notify;			/* =1 if monitor requested overflow notification */
+	unsigned short  active_set;			/* event set active at the time of the overflow */
+	pfm_ovfl_ctrl_t ovfl_ctrl;			/* return: perfmon controls to set by handler */
+
+	unsigned long   pmd_last_reset;			/* last reset value of of the PMD */
+	unsigned long	smpl_pmds[4];			/* bitmask of other PMD of interest on overflow */
+	unsigned long   smpl_pmds_values[PMU_MAX_PMDS]; /* values for the other PMDs of interest */
+	unsigned long   pmd_value;			/* current 64-bit value of the PMD */
+	unsigned long	pmd_eventid;			/* eventid associated with PMD */
+} pfm_ovfl_arg_t;
+
+
+typedef struct {
+	char		*fmt_name;
+	pfm_uuid_t	fmt_uuid;
+	size_t		fmt_arg_size;
+	unsigned long	fmt_flags;
+
+	int		(*fmt_validate)(struct task_struct *task, unsigned int flags, int cpu, void *arg);
+	int		(*fmt_getsize)(struct task_struct *task, unsigned int flags, int cpu, void *arg, unsigned long *size);
+	int 		(*fmt_init)(struct task_struct *task, void *buf, unsigned int flags, int cpu, void *arg);
+	int		(*fmt_handler)(struct task_struct *task, void *buf, pfm_ovfl_arg_t *arg, struct pt_regs *regs, unsigned long stamp);
+	int		(*fmt_restart)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs);
+	int		(*fmt_restart_active)(struct task_struct *task, pfm_ovfl_ctrl_t *ctrl, void *buf, struct pt_regs *regs);
+	int		(*fmt_exit)(struct task_struct *task, void *buf, struct pt_regs *regs);
+
+	struct list_head fmt_list;
+} pfm_buffer_fmt_t;
+
+extern int pfm_register_buffer_fmt(pfm_buffer_fmt_t *fmt);
+extern int pfm_unregister_buffer_fmt(pfm_uuid_t uuid);
+
+/*
+ * perfmon interface exported to modules
+ */
+extern int pfm_mod_read_pmds(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs);
+extern int pfm_mod_write_pmcs(struct task_struct *, void *req, unsigned int nreq, struct pt_regs *regs);
+extern int pfm_mod_write_ibrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs);
+extern int pfm_mod_write_dbrs(struct task_struct *task, void *req, unsigned int nreq, struct pt_regs *regs);
+
+/*
+ * describe the content of the local_cpu_date->pfm_syst_info field
+ */
+#define PFM_CPUINFO_SYST_WIDE	0x1	/* if set a system wide session exists */
+#define PFM_CPUINFO_DCR_PP	0x2	/* if set the system wide session has started */
+#define PFM_CPUINFO_EXCL_IDLE	0x4	/* the system wide session excludes the idle task */
+
+/*
+ * sysctl control structure. visible to sampling formats
+ */
+typedef struct {
+	int	debug;		/* turn on/off debugging via syslog */
+	int	debug_ovfl;	/* turn on/off debug printk in overflow handler */
+	int	fastctxsw;	/* turn on/off fast (unsecure) ctxsw */
+	int	expert_mode;	/* turn on/off value checking */
+} pfm_sysctl_t;
+extern pfm_sysctl_t pfm_sysctl;
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_PERFMON_H */
diff --git a/arch/ia64/include/asm/perfmon_default_smpl.h b/arch/ia64/include/asm/perfmon_default_smpl.h
new file mode 100644
index 000000000000..48822c0811d8
--- /dev/null
+++ b/arch/ia64/include/asm/perfmon_default_smpl.h
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *               Stephane Eranian <eranian@hpl.hp.com>
+ *
+ * This file implements the default sampling buffer format
+ * for Linux/ia64 perfmon subsystem.
+ */
+#ifndef __PERFMON_DEFAULT_SMPL_H__
+#define __PERFMON_DEFAULT_SMPL_H__ 1
+
+#define PFM_DEFAULT_SMPL_UUID { \
+		0x4d, 0x72, 0xbe, 0xc0, 0x06, 0x64, 0x41, 0x43, 0x82, 0xb4, 0xd3, 0xfd, 0x27, 0x24, 0x3c, 0x97}
+
+/*
+ * format specific parameters (passed at context creation)
+ */
+typedef struct {
+	unsigned long buf_size;		/* size of the buffer in bytes */
+	unsigned int  flags;		/* buffer specific flags */
+	unsigned int  res1;		/* for future use */
+	unsigned long reserved[2];	/* for future use */
+} pfm_default_smpl_arg_t;
+
+/*
+ * combined context+format specific structure. Can be passed
+ * to PFM_CONTEXT_CREATE
+ */
+typedef struct {
+	pfarg_context_t		ctx_arg;
+	pfm_default_smpl_arg_t	buf_arg;
+} pfm_default_smpl_ctx_arg_t;
+
+/*
+ * This header is at the beginning of the sampling buffer returned to the user.
+ * It is directly followed by the first record.
+ */
+typedef struct {
+	unsigned long	hdr_count;		/* how many valid entries */
+	unsigned long	hdr_cur_offs;		/* current offset from top of buffer */
+	unsigned long	hdr_reserved2;		/* reserved for future use */
+
+	unsigned long	hdr_overflows;		/* how many times the buffer overflowed */
+	unsigned long   hdr_buf_size;		/* how many bytes in the buffer */
+
+	unsigned int	hdr_version;		/* contains perfmon version (smpl format diffs) */
+	unsigned int	hdr_reserved1;		/* for future use */
+	unsigned long	hdr_reserved[10];	/* for future use */
+} pfm_default_smpl_hdr_t;
+
+/*
+ * Entry header in the sampling buffer.  The header is directly followed
+ * with the values of the PMD registers of interest saved in increasing 
+ * index order: PMD4, PMD5, and so on. How many PMDs are present depends 
+ * on how the session was programmed.
+ *
+ * In the case where multiple counters overflow at the same time, multiple
+ * entries are written consecutively.
+ *
+ * last_reset_value member indicates the initial value of the overflowed PMD. 
+ */
+typedef struct {
+        int             pid;                    /* thread id (for NPTL, this is gettid()) */
+        unsigned char   reserved1[3];           /* reserved for future use */
+        unsigned char   ovfl_pmd;               /* index of overflowed PMD */
+
+        unsigned long   last_reset_val;         /* initial value of overflowed PMD */
+        unsigned long   ip;                     /* where did the overflow interrupt happened  */
+        unsigned long   tstamp;                 /* ar.itc when entering perfmon intr. handler */
+
+        unsigned short  cpu;                    /* cpu on which the overfow occured */
+        unsigned short  set;                    /* event set active when overflow ocurred   */
+        int    		tgid;              	/* thread group id (for NPTL, this is getpid()) */
+} pfm_default_smpl_entry_t;
+
+#define PFM_DEFAULT_MAX_PMDS		64 /* how many pmds supported by data structures (sizeof(unsigned long) */
+#define PFM_DEFAULT_MAX_ENTRY_SIZE	(sizeof(pfm_default_smpl_entry_t)+(sizeof(unsigned long)*PFM_DEFAULT_MAX_PMDS))
+#define PFM_DEFAULT_SMPL_MIN_BUF_SIZE	(sizeof(pfm_default_smpl_hdr_t)+PFM_DEFAULT_MAX_ENTRY_SIZE)
+
+#define PFM_DEFAULT_SMPL_VERSION_MAJ	2U
+#define PFM_DEFAULT_SMPL_VERSION_MIN	0U
+#define PFM_DEFAULT_SMPL_VERSION	(((PFM_DEFAULT_SMPL_VERSION_MAJ&0xffff)<<16)|(PFM_DEFAULT_SMPL_VERSION_MIN & 0xffff))
+
+#endif /* __PERFMON_DEFAULT_SMPL_H__ */
diff --git a/arch/ia64/include/asm/pgalloc.h b/arch/ia64/include/asm/pgalloc.h
new file mode 100644
index 000000000000..b9ac1a6fc216
--- /dev/null
+++ b/arch/ia64/include/asm/pgalloc.h
@@ -0,0 +1,122 @@
+#ifndef _ASM_IA64_PGALLOC_H
+#define _ASM_IA64_PGALLOC_H
+
+/*
+ * This file contains the functions and defines necessary to allocate
+ * page tables.
+ *
+ * This hopefully works with any (fixed) ia-64 page-size, as defined
+ * in <asm/page.h> (currently 8192).
+ *
+ * Copyright (C) 1998-2001 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 2000, Goutham Rao <goutham.rao@intel.com>
+ */
+
+
+#include <linux/compiler.h>
+#include <linux/mm.h>
+#include <linux/page-flags.h>
+#include <linux/threads.h>
+#include <linux/quicklist.h>
+
+#include <asm/mmu_context.h>
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	quicklist_free(0, NULL, pgd);
+}
+
+#ifdef CONFIG_PGTABLE_4
+static inline void
+pgd_populate(struct mm_struct *mm, pgd_t * pgd_entry, pud_t * pud)
+{
+	pgd_val(*pgd_entry) = __pa(pud);
+}
+
+static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline void pud_free(struct mm_struct *mm, pud_t *pud)
+{
+	quicklist_free(0, NULL, pud);
+}
+#define __pud_free_tlb(tlb, pud)	pud_free((tlb)->mm, pud)
+#endif /* CONFIG_PGTABLE_4 */
+
+static inline void
+pud_populate(struct mm_struct *mm, pud_t * pud_entry, pmd_t * pmd)
+{
+	pud_val(*pud_entry) = __pa(pmd);
+}
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	quicklist_free(0, NULL, pmd);
+}
+
+#define __pmd_free_tlb(tlb, pmd)	pmd_free((tlb)->mm, pmd)
+
+static inline void
+pmd_populate(struct mm_struct *mm, pmd_t * pmd_entry, pgtable_t pte)
+{
+	pmd_val(*pmd_entry) = page_to_phys(pte);
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline void
+pmd_populate_kernel(struct mm_struct *mm, pmd_t * pmd_entry, pte_t * pte)
+{
+	pmd_val(*pmd_entry) = __pa(pte);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	struct page *page;
+	void *pg;
+
+	pg = quicklist_alloc(0, GFP_KERNEL, NULL);
+	if (!pg)
+		return NULL;
+	page = virt_to_page(pg);
+	pgtable_page_ctor(page);
+	return page;
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+					  unsigned long addr)
+{
+	return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	quicklist_free_page(0, NULL, pte);
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	quicklist_free(0, NULL, pte);
+}
+
+static inline void check_pgt_cache(void)
+{
+	quicklist_trim(0, NULL, 25, 16);
+}
+
+#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
+
+#endif				/* _ASM_IA64_PGALLOC_H */
diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h
new file mode 100644
index 000000000000..7a9bff47564f
--- /dev/null
+++ b/arch/ia64/include/asm/pgtable.h
@@ -0,0 +1,615 @@
+#ifndef _ASM_IA64_PGTABLE_H
+#define _ASM_IA64_PGTABLE_H
+
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the IA-64 page table tree.
+ *
+ * This hopefully works with any (fixed) IA-64 page-size, as defined
+ * in <asm/page.h>.
+ *
+ * Copyright (C) 1998-2005 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+
+#include <asm/mman.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/system.h>
+#include <asm/types.h>
+
+#define IA64_MAX_PHYS_BITS	50	/* max. number of physical address bits (architected) */
+
+/*
+ * First, define the various bits in a PTE.  Note that the PTE format
+ * matches the VHPT short format, the firt doubleword of the VHPD long
+ * format, and the first doubleword of the TLB insertion format.
+ */
+#define _PAGE_P_BIT		0
+#define _PAGE_A_BIT		5
+#define _PAGE_D_BIT		6
+
+#define _PAGE_P			(1 << _PAGE_P_BIT)	/* page present bit */
+#define _PAGE_MA_WB		(0x0 <<  2)	/* write back memory attribute */
+#define _PAGE_MA_UC		(0x4 <<  2)	/* uncacheable memory attribute */
+#define _PAGE_MA_UCE		(0x5 <<  2)	/* UC exported attribute */
+#define _PAGE_MA_WC		(0x6 <<  2)	/* write coalescing memory attribute */
+#define _PAGE_MA_NAT		(0x7 <<  2)	/* not-a-thing attribute */
+#define _PAGE_MA_MASK		(0x7 <<  2)
+#define _PAGE_PL_0		(0 <<  7)	/* privilege level 0 (kernel) */
+#define _PAGE_PL_1		(1 <<  7)	/* privilege level 1 (unused) */
+#define _PAGE_PL_2		(2 <<  7)	/* privilege level 2 (unused) */
+#define _PAGE_PL_3		(3 <<  7)	/* privilege level 3 (user) */
+#define _PAGE_PL_MASK		(3 <<  7)
+#define _PAGE_AR_R		(0 <<  9)	/* read only */
+#define _PAGE_AR_RX		(1 <<  9)	/* read & execute */
+#define _PAGE_AR_RW		(2 <<  9)	/* read & write */
+#define _PAGE_AR_RWX		(3 <<  9)	/* read, write & execute */
+#define _PAGE_AR_R_RW		(4 <<  9)	/* read / read & write */
+#define _PAGE_AR_RX_RWX		(5 <<  9)	/* read & exec / read, write & exec */
+#define _PAGE_AR_RWX_RW		(6 <<  9)	/* read, write & exec / read & write */
+#define _PAGE_AR_X_RX		(7 <<  9)	/* exec & promote / read & exec */
+#define _PAGE_AR_MASK		(7 <<  9)
+#define _PAGE_AR_SHIFT		9
+#define _PAGE_A			(1 << _PAGE_A_BIT)	/* page accessed bit */
+#define _PAGE_D			(1 << _PAGE_D_BIT)	/* page dirty bit */
+#define _PAGE_PPN_MASK		(((__IA64_UL(1) << IA64_MAX_PHYS_BITS) - 1) & ~0xfffUL)
+#define _PAGE_ED		(__IA64_UL(1) << 52)	/* exception deferral */
+#define _PAGE_PROTNONE		(__IA64_UL(1) << 63)
+
+/* Valid only for a PTE with the present bit cleared: */
+#define _PAGE_FILE		(1 << 1)		/* see swap & file pte remarks below */
+
+#define _PFN_MASK		_PAGE_PPN_MASK
+/* Mask of bits which may be changed by pte_modify(); the odd bits are there for _PAGE_PROTNONE */
+#define _PAGE_CHG_MASK	(_PAGE_P | _PAGE_PROTNONE | _PAGE_PL_MASK | _PAGE_AR_MASK | _PAGE_ED)
+
+#define _PAGE_SIZE_4K	12
+#define _PAGE_SIZE_8K	13
+#define _PAGE_SIZE_16K	14
+#define _PAGE_SIZE_64K	16
+#define _PAGE_SIZE_256K	18
+#define _PAGE_SIZE_1M	20
+#define _PAGE_SIZE_4M	22
+#define _PAGE_SIZE_16M	24
+#define _PAGE_SIZE_64M	26
+#define _PAGE_SIZE_256M	28
+#define _PAGE_SIZE_1G	30
+#define _PAGE_SIZE_4G	32
+
+#define __ACCESS_BITS		_PAGE_ED | _PAGE_A | _PAGE_P | _PAGE_MA_WB
+#define __DIRTY_BITS_NO_ED	_PAGE_A | _PAGE_P | _PAGE_D | _PAGE_MA_WB
+#define __DIRTY_BITS		_PAGE_ED | __DIRTY_BITS_NO_ED
+
+/*
+ * How many pointers will a page table level hold expressed in shift
+ */
+#define PTRS_PER_PTD_SHIFT	(PAGE_SHIFT-3)
+
+/*
+ * Definitions for fourth level:
+ */
+#define PTRS_PER_PTE	(__IA64_UL(1) << (PTRS_PER_PTD_SHIFT))
+
+/*
+ * Definitions for third level:
+ *
+ * PMD_SHIFT determines the size of the area a third-level page table
+ * can map.
+ */
+#define PMD_SHIFT	(PAGE_SHIFT + (PTRS_PER_PTD_SHIFT))
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+#define PTRS_PER_PMD	(1UL << (PTRS_PER_PTD_SHIFT))
+
+#ifdef CONFIG_PGTABLE_4
+/*
+ * Definitions for second level:
+ *
+ * PUD_SHIFT determines the size of the area a second-level page table
+ * can map.
+ */
+#define PUD_SHIFT	(PMD_SHIFT + (PTRS_PER_PTD_SHIFT))
+#define PUD_SIZE	(1UL << PUD_SHIFT)
+#define PUD_MASK	(~(PUD_SIZE-1))
+#define PTRS_PER_PUD	(1UL << (PTRS_PER_PTD_SHIFT))
+#endif
+
+/*
+ * Definitions for first level:
+ *
+ * PGDIR_SHIFT determines what a first-level page table entry can map.
+ */
+#ifdef CONFIG_PGTABLE_4
+#define PGDIR_SHIFT		(PUD_SHIFT + (PTRS_PER_PTD_SHIFT))
+#else
+#define PGDIR_SHIFT		(PMD_SHIFT + (PTRS_PER_PTD_SHIFT))
+#endif
+#define PGDIR_SIZE		(__IA64_UL(1) << PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE-1))
+#define PTRS_PER_PGD_SHIFT	PTRS_PER_PTD_SHIFT
+#define PTRS_PER_PGD		(1UL << PTRS_PER_PGD_SHIFT)
+#define USER_PTRS_PER_PGD	(5*PTRS_PER_PGD/8)	/* regions 0-4 are user regions */
+#define FIRST_USER_ADDRESS	0
+
+/*
+ * All the normal masks have the "page accessed" bits on, as any time
+ * they are used, the page is accessed. They are cleared only by the
+ * page-out routines.
+ */
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_A)
+#define PAGE_SHARED	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RW)
+#define PAGE_READONLY	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_R)
+#define PAGE_COPY	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_R)
+#define PAGE_COPY_EXEC	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
+#define PAGE_GATE	__pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_X_RX)
+#define PAGE_KERNEL	__pgprot(__DIRTY_BITS  | _PAGE_PL_0 | _PAGE_AR_RWX)
+#define PAGE_KERNELRX	__pgprot(__ACCESS_BITS | _PAGE_PL_0 | _PAGE_AR_RX)
+
+# ifndef __ASSEMBLY__
+
+#include <linux/sched.h>	/* for mm_struct */
+#include <linux/bitops.h>
+#include <asm/cacheflush.h>
+#include <asm/mmu_context.h>
+#include <asm/processor.h>
+
+/*
+ * Next come the mappings that determine how mmap() protection bits
+ * (PROT_EXEC, PROT_READ, PROT_WRITE, PROT_NONE) get implemented.  The
+ * _P version gets used for a private shared memory segment, the _S
+ * version gets used for a shared memory segment with MAP_SHARED on.
+ * In a private shared memory segment, we do a copy-on-write if a task
+ * attempts to write to the page.
+ */
+	/* xwr */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_READONLY	/* write to priv pg -> copy & make writable */
+#define __P011	PAGE_READONLY	/* ditto */
+#define __P100	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_X_RX)
+#define __P101	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
+#define __P110	PAGE_COPY_EXEC
+#define __P111	PAGE_COPY_EXEC
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED	/* we don't have (and don't need) write-only */
+#define __S011	PAGE_SHARED
+#define __S100	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_X_RX)
+#define __S101	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RX)
+#define __S110	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX)
+#define __S111	__pgprot(__ACCESS_BITS | _PAGE_PL_3 | _PAGE_AR_RWX)
+
+#define pgd_ERROR(e)	printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
+#ifdef CONFIG_PGTABLE_4
+#define pud_ERROR(e)	printk("%s:%d: bad pud %016lx.\n", __FILE__, __LINE__, pud_val(e))
+#endif
+#define pmd_ERROR(e)	printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pte_ERROR(e)	printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
+
+
+/*
+ * Some definitions to translate between mem_map, PTEs, and page addresses:
+ */
+
+
+/* Quick test to see if ADDR is a (potentially) valid physical address. */
+static inline long
+ia64_phys_addr_valid (unsigned long addr)
+{
+	return (addr & (local_cpu_data->unimpl_pa_mask)) == 0;
+}
+
+/*
+ * kern_addr_valid(ADDR) tests if ADDR is pointing to valid kernel
+ * memory.  For the return value to be meaningful, ADDR must be >=
+ * PAGE_OFFSET.  This operation can be relatively expensive (e.g.,
+ * require a hash-, or multi-level tree-lookup or something of that
+ * sort) but it guarantees to return TRUE only if accessing the page
+ * at that address does not cause an error.  Note that there may be
+ * addresses for which kern_addr_valid() returns FALSE even though an
+ * access would not cause an error (e.g., this is typically true for
+ * memory mapped I/O regions.
+ *
+ * XXX Need to implement this for IA-64.
+ */
+#define kern_addr_valid(addr)	(1)
+
+
+/*
+ * Now come the defines and routines to manage and access the three-level
+ * page table.
+ */
+
+
+#define VMALLOC_START		(RGN_BASE(RGN_GATE) + 0x200000000UL)
+#ifdef CONFIG_VIRTUAL_MEM_MAP
+# define VMALLOC_END_INIT	(RGN_BASE(RGN_GATE) + (1UL << (4*PAGE_SHIFT - 9)))
+# define VMALLOC_END		vmalloc_end
+  extern unsigned long vmalloc_end;
+#else
+#if defined(CONFIG_SPARSEMEM) && defined(CONFIG_SPARSEMEM_VMEMMAP)
+/* SPARSEMEM_VMEMMAP uses half of vmalloc... */
+# define VMALLOC_END		(RGN_BASE(RGN_GATE) + (1UL << (4*PAGE_SHIFT - 10)))
+# define vmemmap		((struct page *)VMALLOC_END)
+#else
+# define VMALLOC_END		(RGN_BASE(RGN_GATE) + (1UL << (4*PAGE_SHIFT - 9)))
+#endif
+#endif
+
+/* fs/proc/kcore.c */
+#define	kc_vaddr_to_offset(v) ((v) - RGN_BASE(RGN_GATE))
+#define	kc_offset_to_vaddr(o) ((o) + RGN_BASE(RGN_GATE))
+
+#define RGN_MAP_SHIFT (PGDIR_SHIFT + PTRS_PER_PGD_SHIFT - 3)
+#define RGN_MAP_LIMIT	((1UL << RGN_MAP_SHIFT) - PAGE_SIZE)	/* per region addr limit */
+
+/*
+ * Conversion functions: convert page frame number (pfn) and a protection value to a page
+ * table entry (pte).
+ */
+#define pfn_pte(pfn, pgprot) \
+({ pte_t __pte; pte_val(__pte) = ((pfn) << PAGE_SHIFT) | pgprot_val(pgprot); __pte; })
+
+/* Extract pfn from pte.  */
+#define pte_pfn(_pte)		((pte_val(_pte) & _PFN_MASK) >> PAGE_SHIFT)
+
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+/* This takes a physical page address that is used by the remapping functions */
+#define mk_pte_phys(physpage, pgprot) \
+({ pte_t __pte; pte_val(__pte) = physpage + pgprot_val(pgprot); __pte; })
+
+#define pte_modify(_pte, newprot) \
+	(__pte((pte_val(_pte) & ~_PAGE_CHG_MASK) | (pgprot_val(newprot) & _PAGE_CHG_MASK)))
+
+#define pte_none(pte) 			(!pte_val(pte))
+#define pte_present(pte)		(pte_val(pte) & (_PAGE_P | _PAGE_PROTNONE))
+#define pte_clear(mm,addr,pte)		(pte_val(*(pte)) = 0UL)
+/* pte_page() returns the "struct page *" corresponding to the PTE: */
+#define pte_page(pte)			virt_to_page(((pte_val(pte) & _PFN_MASK) + PAGE_OFFSET))
+
+#define pmd_none(pmd)			(!pmd_val(pmd))
+#define pmd_bad(pmd)			(!ia64_phys_addr_valid(pmd_val(pmd)))
+#define pmd_present(pmd)		(pmd_val(pmd) != 0UL)
+#define pmd_clear(pmdp)			(pmd_val(*(pmdp)) = 0UL)
+#define pmd_page_vaddr(pmd)		((unsigned long) __va(pmd_val(pmd) & _PFN_MASK))
+#define pmd_page(pmd)			virt_to_page((pmd_val(pmd) + PAGE_OFFSET))
+
+#define pud_none(pud)			(!pud_val(pud))
+#define pud_bad(pud)			(!ia64_phys_addr_valid(pud_val(pud)))
+#define pud_present(pud)		(pud_val(pud) != 0UL)
+#define pud_clear(pudp)			(pud_val(*(pudp)) = 0UL)
+#define pud_page_vaddr(pud)		((unsigned long) __va(pud_val(pud) & _PFN_MASK))
+#define pud_page(pud)			virt_to_page((pud_val(pud) + PAGE_OFFSET))
+
+#ifdef CONFIG_PGTABLE_4
+#define pgd_none(pgd)			(!pgd_val(pgd))
+#define pgd_bad(pgd)			(!ia64_phys_addr_valid(pgd_val(pgd)))
+#define pgd_present(pgd)		(pgd_val(pgd) != 0UL)
+#define pgd_clear(pgdp)			(pgd_val(*(pgdp)) = 0UL)
+#define pgd_page_vaddr(pgd)		((unsigned long) __va(pgd_val(pgd) & _PFN_MASK))
+#define pgd_page(pgd)			virt_to_page((pgd_val(pgd) + PAGE_OFFSET))
+#endif
+
+/*
+ * The following have defined behavior only work if pte_present() is true.
+ */
+#define pte_write(pte)	((unsigned) (((pte_val(pte) & _PAGE_AR_MASK) >> _PAGE_AR_SHIFT) - 2) <= 4)
+#define pte_exec(pte)		((pte_val(pte) & _PAGE_AR_RX) != 0)
+#define pte_dirty(pte)		((pte_val(pte) & _PAGE_D) != 0)
+#define pte_young(pte)		((pte_val(pte) & _PAGE_A) != 0)
+#define pte_file(pte)		((pte_val(pte) & _PAGE_FILE) != 0)
+#define pte_special(pte)	0
+
+/*
+ * Note: we convert AR_RWX to AR_RX and AR_RW to AR_R by clearing the 2nd bit in the
+ * access rights:
+ */
+#define pte_wrprotect(pte)	(__pte(pte_val(pte) & ~_PAGE_AR_RW))
+#define pte_mkwrite(pte)	(__pte(pte_val(pte) | _PAGE_AR_RW))
+#define pte_mkold(pte)		(__pte(pte_val(pte) & ~_PAGE_A))
+#define pte_mkyoung(pte)	(__pte(pte_val(pte) | _PAGE_A))
+#define pte_mkclean(pte)	(__pte(pte_val(pte) & ~_PAGE_D))
+#define pte_mkdirty(pte)	(__pte(pte_val(pte) | _PAGE_D))
+#define pte_mkhuge(pte)		(__pte(pte_val(pte)))
+#define pte_mkspecial(pte)	(pte)
+
+/*
+ * Because ia64's Icache and Dcache is not coherent (on a cpu), we need to
+ * sync icache and dcache when we insert *new* executable page.
+ *  __ia64_sync_icache_dcache() check Pg_arch_1 bit and flush icache
+ * if necessary.
+ *
+ *  set_pte() is also called by the kernel, but we can expect that the kernel
+ *  flushes icache explicitly if necessary.
+ */
+#define pte_present_exec_user(pte)\
+	((pte_val(pte) & (_PAGE_P | _PAGE_PL_MASK | _PAGE_AR_RX)) == \
+		(_PAGE_P | _PAGE_PL_3 | _PAGE_AR_RX))
+
+extern void __ia64_sync_icache_dcache(pte_t pteval);
+static inline void set_pte(pte_t *ptep, pte_t pteval)
+{
+	/* page is present && page is user  && page is executable
+	 * && (page swapin or new page or page migraton
+	 *	|| copy_on_write with page copying.)
+	 */
+	if (pte_present_exec_user(pteval) &&
+	    (!pte_present(*ptep) ||
+		pte_pfn(*ptep) != pte_pfn(pteval)))
+		/* load_module() calles flush_icache_range() explicitly*/
+		__ia64_sync_icache_dcache(pteval);
+	*ptep = pteval;
+}
+
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * Make page protection values cacheable, uncacheable, or write-
+ * combining.  Note that "protection" is really a misnomer here as the
+ * protection value contains the memory attribute bits, dirty bits, and
+ * various other bits as well.
+ */
+#define pgprot_cacheable(prot)		__pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_WB)
+#define pgprot_noncached(prot)		__pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_UC)
+#define pgprot_writecombine(prot)	__pgprot((pgprot_val(prot) & ~_PAGE_MA_MASK) | _PAGE_MA_WC)
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+static inline unsigned long
+pgd_index (unsigned long address)
+{
+	unsigned long region = address >> 61;
+	unsigned long l1index = (address >> PGDIR_SHIFT) & ((PTRS_PER_PGD >> 3) - 1);
+
+	return (region << (PAGE_SHIFT - 6)) | l1index;
+}
+
+/* The offset in the 1-level directory is given by the 3 region bits
+   (61..63) and the level-1 bits.  */
+static inline pgd_t*
+pgd_offset (const struct mm_struct *mm, unsigned long address)
+{
+	return mm->pgd + pgd_index(address);
+}
+
+/* In the kernel's mapped region we completely ignore the region number
+   (since we know it's in region number 5). */
+#define pgd_offset_k(addr) \
+	(init_mm.pgd + (((addr) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)))
+
+/* Look up a pgd entry in the gate area.  On IA-64, the gate-area
+   resides in the kernel-mapped segment, hence we use pgd_offset_k()
+   here.  */
+#define pgd_offset_gate(mm, addr)	pgd_offset_k(addr)
+
+#ifdef CONFIG_PGTABLE_4
+/* Find an entry in the second-level page table.. */
+#define pud_offset(dir,addr) \
+	((pud_t *) pgd_page_vaddr(*(dir)) + (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
+#endif
+
+/* Find an entry in the third-level page table.. */
+#define pmd_offset(dir,addr) \
+	((pmd_t *) pud_page_vaddr(*(dir)) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)))
+
+/*
+ * Find an entry in the third-level page table.  This looks more complicated than it
+ * should be because some platforms place page tables in high memory.
+ */
+#define pte_index(addr)	 	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir,addr)	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir,addr)	pte_offset_kernel(dir, addr)
+#define pte_offset_map_nested(dir,addr)	pte_offset_map(dir, addr)
+#define pte_unmap(pte)			do { } while (0)
+#define pte_unmap_nested(pte)		do { } while (0)
+
+/* atomic versions of the some PTE manipulations: */
+
+static inline int
+ptep_test_and_clear_young (struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	if (!pte_young(*ptep))
+		return 0;
+	return test_and_clear_bit(_PAGE_A_BIT, ptep);
+#else
+	pte_t pte = *ptep;
+	if (!pte_young(pte))
+		return 0;
+	set_pte_at(vma->vm_mm, addr, ptep, pte_mkold(pte));
+	return 1;
+#endif
+}
+
+static inline pte_t
+ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	return __pte(xchg((long *) ptep, 0));
+#else
+	pte_t pte = *ptep;
+	pte_clear(mm, addr, ptep);
+	return pte;
+#endif
+}
+
+static inline void
+ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_SMP
+	unsigned long new, old;
+
+	do {
+		old = pte_val(*ptep);
+		new = pte_val(pte_wrprotect(__pte (old)));
+	} while (cmpxchg((unsigned long *) ptep, old, new) != old);
+#else
+	pte_t old_pte = *ptep;
+	set_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));
+#endif
+}
+
+static inline int
+pte_same (pte_t a, pte_t b)
+{
+	return pte_val(a) == pte_val(b);
+}
+
+#define update_mmu_cache(vma, address, pte) do { } while (0)
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern void paging_init (void);
+
+/*
+ * Note: The macros below rely on the fact that MAX_SWAPFILES_SHIFT <= number of
+ *	 bits in the swap-type field of the swap pte.  It would be nice to
+ *	 enforce that, but we can't easily include <linux/swap.h> here.
+ *	 (Of course, better still would be to define MAX_SWAPFILES_SHIFT here...).
+ *
+ * Format of swap pte:
+ *	bit   0   : present bit (must be zero)
+ *	bit   1   : _PAGE_FILE (must be zero)
+ *	bits  2- 8: swap-type
+ *	bits  9-62: swap offset
+ *	bit  63   : _PAGE_PROTNONE bit
+ *
+ * Format of file pte:
+ *	bit   0   : present bit (must be zero)
+ *	bit   1   : _PAGE_FILE (must be one)
+ *	bits  2-62: file_offset/PAGE_SIZE
+ *	bit  63   : _PAGE_PROTNONE bit
+ */
+#define __swp_type(entry)		(((entry).val >> 2) & 0x7f)
+#define __swp_offset(entry)		(((entry).val << 1) >> 10)
+#define __swp_entry(type,offset)	((swp_entry_t) { ((type) << 2) | ((long) (offset) << 9) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+#define PTE_FILE_MAX_BITS		61
+#define pte_to_pgoff(pte)		((pte_val(pte) << 1) >> 3)
+#define pgoff_to_pte(off)		((pte_t) { ((off) << 2) | _PAGE_FILE })
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[PAGE_SIZE/sizeof(unsigned long)];
+extern struct page *zero_page_memmap_ptr;
+#define ZERO_PAGE(vaddr) (zero_page_memmap_ptr)
+
+/* We provide our own get_unmapped_area to cope with VA holes for userland */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HUGETLB_PGDIR_SHIFT	(HPAGE_SHIFT + 2*(PAGE_SHIFT-3))
+#define HUGETLB_PGDIR_SIZE	(__IA64_UL(1) << HUGETLB_PGDIR_SHIFT)
+#define HUGETLB_PGDIR_MASK	(~(HUGETLB_PGDIR_SIZE-1))
+#endif
+
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+/*
+ * Update PTEP with ENTRY, which is guaranteed to be a less
+ * restrictive PTE.  That is, ENTRY may have the ACCESSED, DIRTY, and
+ * WRITABLE bits turned on, when the value at PTEP did not.  The
+ * WRITABLE bit may only be turned if SAFELY_WRITABLE is TRUE.
+ *
+ * SAFELY_WRITABLE is TRUE if we can update the value at PTEP without
+ * having to worry about races.  On SMP machines, there are only two
+ * cases where this is true:
+ *
+ *	(1) *PTEP has the PRESENT bit turned OFF
+ *	(2) ENTRY has the DIRTY bit turned ON
+ *
+ * On ia64, we could implement this routine with a cmpxchg()-loop
+ * which ORs in the _PAGE_A/_PAGE_D bit if they're set in ENTRY.
+ * However, like on x86, we can get a more streamlined version by
+ * observing that it is OK to drop ACCESSED bit updates when
+ * SAFELY_WRITABLE is FALSE.  Besides being rare, all that would do is
+ * result in an extra Access-bit fault, which would then turn on the
+ * ACCESSED bit in the low-level fault handler (iaccess_bit or
+ * daccess_bit in ivt.S).
+ */
+#ifdef CONFIG_SMP
+# define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __safely_writable) \
+({									\
+	int __changed = !pte_same(*(__ptep), __entry);			\
+	if (__changed && __safely_writable) {				\
+		set_pte(__ptep, __entry);				\
+		flush_tlb_page(__vma, __addr);				\
+	}								\
+	__changed;							\
+})
+#else
+# define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __safely_writable) \
+({									\
+	int __changed = !pte_same(*(__ptep), __entry);			\
+	if (__changed) {						\
+		set_pte_at((__vma)->vm_mm, (__addr), __ptep, __entry);	\
+		flush_tlb_page(__vma, __addr);				\
+	}								\
+	__changed;							\
+})
+#endif
+
+#  ifdef CONFIG_VIRTUAL_MEM_MAP
+  /* arch mem_map init routine is needed due to holes in a virtual mem_map */
+#   define __HAVE_ARCH_MEMMAP_INIT
+    extern void memmap_init (unsigned long size, int nid, unsigned long zone,
+			     unsigned long start_pfn);
+#  endif /* CONFIG_VIRTUAL_MEM_MAP */
+# endif /* !__ASSEMBLY__ */
+
+/*
+ * Identity-mapped regions use a large page size.  We'll call such large pages
+ * "granules".  If you can think of a better name that's unambiguous, let me
+ * know...
+ */
+#if defined(CONFIG_IA64_GRANULE_64MB)
+# define IA64_GRANULE_SHIFT	_PAGE_SIZE_64M
+#elif defined(CONFIG_IA64_GRANULE_16MB)
+# define IA64_GRANULE_SHIFT	_PAGE_SIZE_16M
+#endif
+#define IA64_GRANULE_SIZE	(1 << IA64_GRANULE_SHIFT)
+/*
+ * log2() of the page size we use to map the kernel image (IA64_TR_KERNEL):
+ */
+#define KERNEL_TR_PAGE_SHIFT	_PAGE_SIZE_64M
+#define KERNEL_TR_PAGE_SIZE	(1 << KERNEL_TR_PAGE_SHIFT)
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+/* These tell get_user_pages() that the first gate page is accessible from user-level.  */
+#define FIXADDR_USER_START	GATE_ADDR
+#ifdef HAVE_BUGGY_SEGREL
+# define FIXADDR_USER_END	(GATE_ADDR + 2*PAGE_SIZE)
+#else
+# define FIXADDR_USER_END	(GATE_ADDR + 2*PERCPU_PAGE_SIZE)
+#endif
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define __HAVE_ARCH_PTE_SAME
+#define __HAVE_ARCH_PGD_OFFSET_GATE
+
+
+#ifndef CONFIG_PGTABLE_4
+#include <asm-generic/pgtable-nopud.h>
+#endif
+#include <asm-generic/pgtable.h>
+
+#endif /* _ASM_IA64_PGTABLE_H */
diff --git a/arch/ia64/include/asm/poll.h b/arch/ia64/include/asm/poll.h
new file mode 100644
index 000000000000..c98509d3149e
--- /dev/null
+++ b/arch/ia64/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/ia64/include/asm/posix_types.h b/arch/ia64/include/asm/posix_types.h
new file mode 100644
index 000000000000..17885567b731
--- /dev/null
+++ b/arch/ia64/include/asm/posix_types.h
@@ -0,0 +1,126 @@
+#ifndef _ASM_IA64_POSIX_TYPES_H
+#define _ASM_IA64_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ *
+ * Based on <asm-alpha/posix_types.h>.
+ *
+ * Modified 1998-2000, 2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned int	__kernel_mode_t;
+typedef unsigned int	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef long long	__kernel_loff_t;
+typedef int		__kernel_pid_t;
+typedef int		__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned long	__kernel_sigset_t;	/* at least 32 bits */
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef __kernel_gid_t __kernel_old_gid_t;
+typedef __kernel_uid_t __kernel_uid32_t;
+typedef __kernel_gid_t __kernel_gid32_t;
+
+typedef unsigned int	__kernel_old_dev_t;
+
+# ifdef __KERNEL__
+
+#  ifndef __GNUC__
+
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+#define	__FD_ISSET(d, set)	(((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
+#define	__FD_ZERO(set)	\
+  ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
+
+#  else /* !__GNUC__ */
+
+/* With GNU C, use inline functions instead so args are evaluated only once: */
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, const __kernel_fd_set *p)
+{ 
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		      case 16:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			return;
+
+		      case 8:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			return;
+
+		      case 4:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#  endif /* !__GNUC__ */
+# endif /* __KERNEL__ */
+#endif /* _ASM_IA64_POSIX_TYPES_H */
diff --git a/arch/ia64/include/asm/processor.h b/arch/ia64/include/asm/processor.h
new file mode 100644
index 000000000000..f88fa054d01d
--- /dev/null
+++ b/arch/ia64/include/asm/processor.h
@@ -0,0 +1,771 @@
+#ifndef _ASM_IA64_PROCESSOR_H
+#define _ASM_IA64_PROCESSOR_H
+
+/*
+ * Copyright (C) 1998-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ *
+ * 11/24/98	S.Eranian	added ia64_set_iva()
+ * 12/03/99	D. Mosberger	implement thread_saved_pc() via kernel unwind API
+ * 06/16/00	A. Mallick	added csd/ssd/tssd for ia32 support
+ */
+
+
+#include <asm/intrinsics.h>
+#include <asm/kregs.h>
+#include <asm/ptrace.h>
+#include <asm/ustack.h>
+
+#define IA64_NUM_PHYS_STACK_REG	96
+#define IA64_NUM_DBG_REGS	8
+
+#define DEFAULT_MAP_BASE	__IA64_UL_CONST(0x2000000000000000)
+#define DEFAULT_TASK_SIZE	__IA64_UL_CONST(0xa000000000000000)
+
+/*
+ * TASK_SIZE really is a mis-named.  It really is the maximum user
+ * space address (plus one).  On IA-64, there are five regions of 2TB
+ * each (assuming 8KB page size), for a total of 8TB of user virtual
+ * address space.
+ */
+#define TASK_SIZE_OF(tsk)	((tsk)->thread.task_size)
+#define TASK_SIZE       	TASK_SIZE_OF(current)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(current->thread.map_base)
+
+#define IA64_THREAD_FPH_VALID	(__IA64_UL(1) << 0)	/* floating-point high state valid? */
+#define IA64_THREAD_DBG_VALID	(__IA64_UL(1) << 1)	/* debug registers valid? */
+#define IA64_THREAD_PM_VALID	(__IA64_UL(1) << 2)	/* performance registers valid? */
+#define IA64_THREAD_UAC_NOPRINT	(__IA64_UL(1) << 3)	/* don't log unaligned accesses */
+#define IA64_THREAD_UAC_SIGBUS	(__IA64_UL(1) << 4)	/* generate SIGBUS on unaligned acc. */
+#define IA64_THREAD_MIGRATION	(__IA64_UL(1) << 5)	/* require migration
+							   sync at ctx sw */
+#define IA64_THREAD_FPEMU_NOPRINT (__IA64_UL(1) << 6)	/* don't log any fpswa faults */
+#define IA64_THREAD_FPEMU_SIGFPE  (__IA64_UL(1) << 7)	/* send a SIGFPE for fpswa faults */
+
+#define IA64_THREAD_UAC_SHIFT	3
+#define IA64_THREAD_UAC_MASK	(IA64_THREAD_UAC_NOPRINT | IA64_THREAD_UAC_SIGBUS)
+#define IA64_THREAD_FPEMU_SHIFT	6
+#define IA64_THREAD_FPEMU_MASK	(IA64_THREAD_FPEMU_NOPRINT | IA64_THREAD_FPEMU_SIGFPE)
+
+
+/*
+ * This shift should be large enough to be able to represent 1000000000/itc_freq with good
+ * accuracy while being small enough to fit 10*1000000000<<IA64_NSEC_PER_CYC_SHIFT in 64 bits
+ * (this will give enough slack to represent 10 seconds worth of time as a scaled number).
+ */
+#define IA64_NSEC_PER_CYC_SHIFT	30
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cache.h>
+#include <linux/compiler.h>
+#include <linux/threads.h>
+#include <linux/types.h>
+
+#include <asm/fpu.h>
+#include <asm/page.h>
+#include <asm/percpu.h>
+#include <asm/rse.h>
+#include <asm/unwind.h>
+#include <asm/atomic.h>
+#ifdef CONFIG_NUMA
+#include <asm/nodedata.h>
+#endif
+
+/* like above but expressed as bitfields for more efficient access: */
+struct ia64_psr {
+	__u64 reserved0 : 1;
+	__u64 be : 1;
+	__u64 up : 1;
+	__u64 ac : 1;
+	__u64 mfl : 1;
+	__u64 mfh : 1;
+	__u64 reserved1 : 7;
+	__u64 ic : 1;
+	__u64 i : 1;
+	__u64 pk : 1;
+	__u64 reserved2 : 1;
+	__u64 dt : 1;
+	__u64 dfl : 1;
+	__u64 dfh : 1;
+	__u64 sp : 1;
+	__u64 pp : 1;
+	__u64 di : 1;
+	__u64 si : 1;
+	__u64 db : 1;
+	__u64 lp : 1;
+	__u64 tb : 1;
+	__u64 rt : 1;
+	__u64 reserved3 : 4;
+	__u64 cpl : 2;
+	__u64 is : 1;
+	__u64 mc : 1;
+	__u64 it : 1;
+	__u64 id : 1;
+	__u64 da : 1;
+	__u64 dd : 1;
+	__u64 ss : 1;
+	__u64 ri : 2;
+	__u64 ed : 1;
+	__u64 bn : 1;
+	__u64 reserved4 : 19;
+};
+
+union ia64_isr {
+	__u64  val;
+	struct {
+		__u64 code : 16;
+		__u64 vector : 8;
+		__u64 reserved1 : 8;
+		__u64 x : 1;
+		__u64 w : 1;
+		__u64 r : 1;
+		__u64 na : 1;
+		__u64 sp : 1;
+		__u64 rs : 1;
+		__u64 ir : 1;
+		__u64 ni : 1;
+		__u64 so : 1;
+		__u64 ei : 2;
+		__u64 ed : 1;
+		__u64 reserved2 : 20;
+	};
+};
+
+union ia64_lid {
+	__u64 val;
+	struct {
+		__u64  rv  : 16;
+		__u64  eid : 8;
+		__u64  id  : 8;
+		__u64  ig  : 32;
+	};
+};
+
+union ia64_tpr {
+	__u64 val;
+	struct {
+		__u64 ig0 : 4;
+		__u64 mic : 4;
+		__u64 rsv : 8;
+		__u64 mmi : 1;
+		__u64 ig1 : 47;
+	};
+};
+
+union ia64_itir {
+	__u64 val;
+	struct {
+		__u64 rv3  :  2; /* 0-1 */
+		__u64 ps   :  6; /* 2-7 */
+		__u64 key  : 24; /* 8-31 */
+		__u64 rv4  : 32; /* 32-63 */
+	};
+};
+
+union  ia64_rr {
+	__u64 val;
+	struct {
+		__u64  ve	:  1;  /* enable hw walker */
+		__u64  reserved0:  1;  /* reserved */
+		__u64  ps	:  6;  /* log page size */
+		__u64  rid	: 24;  /* region id */
+		__u64  reserved1: 32;  /* reserved */
+	};
+};
+
+/*
+ * CPU type, hardware bug flags, and per-CPU state.  Frequently used
+ * state comes earlier:
+ */
+struct cpuinfo_ia64 {
+	__u32 softirq_pending;
+	__u64 itm_delta;	/* # of clock cycles between clock ticks */
+	__u64 itm_next;		/* interval timer mask value to use for next clock tick */
+	__u64 nsec_per_cyc;	/* (1000000000<<IA64_NSEC_PER_CYC_SHIFT)/itc_freq */
+	__u64 unimpl_va_mask;	/* mask of unimplemented virtual address bits (from PAL) */
+	__u64 unimpl_pa_mask;	/* mask of unimplemented physical address bits (from PAL) */
+	__u64 itc_freq;		/* frequency of ITC counter */
+	__u64 proc_freq;	/* frequency of processor */
+	__u64 cyc_per_usec;	/* itc_freq/1000000 */
+	__u64 ptce_base;
+	__u32 ptce_count[2];
+	__u32 ptce_stride[2];
+	struct task_struct *ksoftirqd;	/* kernel softirq daemon for this CPU */
+
+#ifdef CONFIG_SMP
+	__u64 loops_per_jiffy;
+	int cpu;
+	__u32 socket_id;	/* physical processor socket id */
+	__u16 core_id;		/* core id */
+	__u16 thread_id;	/* thread id */
+	__u16 num_log;		/* Total number of logical processors on
+				 * this socket that were successfully booted */
+	__u8  cores_per_socket;	/* Cores per processor socket */
+	__u8  threads_per_core;	/* Threads per core */
+#endif
+
+	/* CPUID-derived information: */
+	__u64 ppn;
+	__u64 features;
+	__u8 number;
+	__u8 revision;
+	__u8 model;
+	__u8 family;
+	__u8 archrev;
+	char vendor[16];
+	char *model_name;
+
+#ifdef CONFIG_NUMA
+	struct ia64_node_data *node_data;
+#endif
+};
+
+DECLARE_PER_CPU(struct cpuinfo_ia64, cpu_info);
+
+/*
+ * The "local" data variable.  It refers to the per-CPU data of the currently executing
+ * CPU, much like "current" points to the per-task data of the currently executing task.
+ * Do not use the address of local_cpu_data, since it will be different from
+ * cpu_data(smp_processor_id())!
+ */
+#define local_cpu_data		(&__ia64_per_cpu_var(cpu_info))
+#define cpu_data(cpu)		(&per_cpu(cpu_info, cpu))
+
+extern void print_cpu_info (struct cpuinfo_ia64 *);
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define SET_UNALIGN_CTL(task,value)								\
+({												\
+	(task)->thread.flags = (((task)->thread.flags & ~IA64_THREAD_UAC_MASK)			\
+				| (((value) << IA64_THREAD_UAC_SHIFT) & IA64_THREAD_UAC_MASK));	\
+	0;											\
+})
+#define GET_UNALIGN_CTL(task,addr)								\
+({												\
+	put_user(((task)->thread.flags & IA64_THREAD_UAC_MASK) >> IA64_THREAD_UAC_SHIFT,	\
+		 (int __user *) (addr));							\
+})
+
+#define SET_FPEMU_CTL(task,value)								\
+({												\
+	(task)->thread.flags = (((task)->thread.flags & ~IA64_THREAD_FPEMU_MASK)		\
+			  | (((value) << IA64_THREAD_FPEMU_SHIFT) & IA64_THREAD_FPEMU_MASK));	\
+	0;											\
+})
+#define GET_FPEMU_CTL(task,addr)								\
+({												\
+	put_user(((task)->thread.flags & IA64_THREAD_FPEMU_MASK) >> IA64_THREAD_FPEMU_SHIFT,	\
+		 (int __user *) (addr));							\
+})
+
+#ifdef CONFIG_IA32_SUPPORT
+struct desc_struct {
+	unsigned int a, b;
+};
+
+#define desc_empty(desc)		(!((desc)->a | (desc)->b))
+#define desc_equal(desc1, desc2)	(((desc1)->a == (desc2)->a) && ((desc1)->b == (desc2)->b))
+
+#define GDT_ENTRY_TLS_ENTRIES	3
+#define GDT_ENTRY_TLS_MIN	6
+#define GDT_ENTRY_TLS_MAX 	(GDT_ENTRY_TLS_MIN + GDT_ENTRY_TLS_ENTRIES - 1)
+
+#define TLS_SIZE (GDT_ENTRY_TLS_ENTRIES * 8)
+
+struct ia64_partial_page_list;
+#endif
+
+struct thread_struct {
+	__u32 flags;			/* various thread flags (see IA64_THREAD_*) */
+	/* writing on_ustack is performance-critical, so it's worth spending 8 bits on it... */
+	__u8 on_ustack;			/* executing on user-stacks? */
+	__u8 pad[3];
+	__u64 ksp;			/* kernel stack pointer */
+	__u64 map_base;			/* base address for get_unmapped_area() */
+	__u64 task_size;		/* limit for task size */
+	__u64 rbs_bot;			/* the base address for the RBS */
+	int last_fph_cpu;		/* CPU that may hold the contents of f32-f127 */
+
+#ifdef CONFIG_IA32_SUPPORT
+	__u64 eflag;			/* IA32 EFLAGS reg */
+	__u64 fsr;			/* IA32 floating pt status reg */
+	__u64 fcr;			/* IA32 floating pt control reg */
+	__u64 fir;			/* IA32 fp except. instr. reg */
+	__u64 fdr;			/* IA32 fp except. data reg */
+	__u64 old_k1;			/* old value of ar.k1 */
+	__u64 old_iob;			/* old IOBase value */
+	struct ia64_partial_page_list *ppl; /* partial page list for 4K page size issue */
+        /* cached TLS descriptors. */
+	struct desc_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
+
+# define INIT_THREAD_IA32	.eflag =	0,			\
+				.fsr =		0,			\
+				.fcr =		0x17800000037fULL,	\
+				.fir =		0,			\
+				.fdr =		0,			\
+				.old_k1 =	0,			\
+				.old_iob =	0,			\
+				.ppl =		NULL,
+#else
+# define INIT_THREAD_IA32
+#endif /* CONFIG_IA32_SUPPORT */
+#ifdef CONFIG_PERFMON
+	void *pfm_context;		     /* pointer to detailed PMU context */
+	unsigned long pfm_needs_checking;    /* when >0, pending perfmon work on kernel exit */
+# define INIT_THREAD_PM		.pfm_context =		NULL,     \
+				.pfm_needs_checking =	0UL,
+#else
+# define INIT_THREAD_PM
+#endif
+	__u64 dbr[IA64_NUM_DBG_REGS];
+	__u64 ibr[IA64_NUM_DBG_REGS];
+	struct ia64_fpreg fph[96];	/* saved/loaded on demand */
+};
+
+#define INIT_THREAD {						\
+	.flags =	0,					\
+	.on_ustack =	0,					\
+	.ksp =		0,					\
+	.map_base =	DEFAULT_MAP_BASE,			\
+	.rbs_bot =	STACK_TOP - DEFAULT_USER_STACK_SIZE,	\
+	.task_size =	DEFAULT_TASK_SIZE,			\
+	.last_fph_cpu =  -1,					\
+	INIT_THREAD_IA32					\
+	INIT_THREAD_PM						\
+	.dbr =		{0, },					\
+	.ibr =		{0, },					\
+	.fph =		{{{{0}}}, }				\
+}
+
+#define start_thread(regs,new_ip,new_sp) do {							\
+	set_fs(USER_DS);									\
+	regs->cr_ipsr = ((regs->cr_ipsr | (IA64_PSR_BITS_TO_SET | IA64_PSR_CPL))		\
+			 & ~(IA64_PSR_BITS_TO_CLEAR | IA64_PSR_RI | IA64_PSR_IS));		\
+	regs->cr_iip = new_ip;									\
+	regs->ar_rsc = 0xf;		/* eager mode, privilege level 3 */			\
+	regs->ar_rnat = 0;									\
+	regs->ar_bspstore = current->thread.rbs_bot;						\
+	regs->ar_fpsr = FPSR_DEFAULT;								\
+	regs->loadrs = 0;									\
+	regs->r8 = get_dumpable(current->mm);	/* set "don't zap registers" flag */		\
+	regs->r12 = new_sp - 16;	/* allocate 16 byte scratch area */			\
+	if (unlikely(!get_dumpable(current->mm))) {							\
+		/*										\
+		 * Zap scratch regs to avoid leaking bits between processes with different	\
+		 * uid/privileges.								\
+		 */										\
+		regs->ar_pfs = 0; regs->b0 = 0; regs->pr = 0;					\
+		regs->r1 = 0; regs->r9  = 0; regs->r11 = 0; regs->r13 = 0; regs->r15 = 0;	\
+	}											\
+} while (0)
+
+/* Forward declarations, a strange C thing... */
+struct mm_struct;
+struct task_struct;
+
+/*
+ * Free all resources held by a thread. This is called after the
+ * parent of DEAD_TASK has collected the exit status of the task via
+ * wait().
+ */
+#define release_thread(dead_task)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+/*
+ * This is the mechanism for creating a new kernel thread.
+ *
+ * NOTE 1: Only a kernel-only process (ie the swapper or direct
+ * descendants who haven't done an "execve()") should use this: it
+ * will work within a system call from a "real" process, but the
+ * process memory space will not be free'd until both the parent and
+ * the child have exited.
+ *
+ * NOTE 2: This MUST NOT be an inlined function.  Otherwise, we get
+ * into trouble in init/main.c when the child thread returns to
+ * do_basic_setup() and the timing is such that free_initmem() has
+ * been called already.
+ */
+extern pid_t kernel_thread (int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Get wait channel for task P.  */
+extern unsigned long get_wchan (struct task_struct *p);
+
+/* Return instruction pointer of blocked task TSK.  */
+#define KSTK_EIP(tsk)					\
+  ({							\
+	struct pt_regs *_regs = task_pt_regs(tsk);	\
+	_regs->cr_iip + ia64_psr(_regs)->ri;		\
+  })
+
+/* Return stack pointer of blocked task TSK.  */
+#define KSTK_ESP(tsk)  ((tsk)->thread.ksp)
+
+extern void ia64_getreg_unknown_kr (void);
+extern void ia64_setreg_unknown_kr (void);
+
+#define ia64_get_kr(regnum)					\
+({								\
+	unsigned long r = 0;					\
+								\
+	switch (regnum) {					\
+	    case 0: r = ia64_getreg(_IA64_REG_AR_KR0); break;	\
+	    case 1: r = ia64_getreg(_IA64_REG_AR_KR1); break;	\
+	    case 2: r = ia64_getreg(_IA64_REG_AR_KR2); break;	\
+	    case 3: r = ia64_getreg(_IA64_REG_AR_KR3); break;	\
+	    case 4: r = ia64_getreg(_IA64_REG_AR_KR4); break;	\
+	    case 5: r = ia64_getreg(_IA64_REG_AR_KR5); break;	\
+	    case 6: r = ia64_getreg(_IA64_REG_AR_KR6); break;	\
+	    case 7: r = ia64_getreg(_IA64_REG_AR_KR7); break;	\
+	    default: ia64_getreg_unknown_kr(); break;		\
+	}							\
+	r;							\
+})
+
+#define ia64_set_kr(regnum, r) 					\
+({								\
+	switch (regnum) {					\
+	    case 0: ia64_setreg(_IA64_REG_AR_KR0, r); break;	\
+	    case 1: ia64_setreg(_IA64_REG_AR_KR1, r); break;	\
+	    case 2: ia64_setreg(_IA64_REG_AR_KR2, r); break;	\
+	    case 3: ia64_setreg(_IA64_REG_AR_KR3, r); break;	\
+	    case 4: ia64_setreg(_IA64_REG_AR_KR4, r); break;	\
+	    case 5: ia64_setreg(_IA64_REG_AR_KR5, r); break;	\
+	    case 6: ia64_setreg(_IA64_REG_AR_KR6, r); break;	\
+	    case 7: ia64_setreg(_IA64_REG_AR_KR7, r); break;	\
+	    default: ia64_setreg_unknown_kr(); break;		\
+	}							\
+})
+
+/*
+ * The following three macros can't be inline functions because we don't have struct
+ * task_struct at this point.
+ */
+
+/*
+ * Return TRUE if task T owns the fph partition of the CPU we're running on.
+ * Must be called from code that has preemption disabled.
+ */
+#define ia64_is_local_fpu_owner(t)								\
+({												\
+	struct task_struct *__ia64_islfo_task = (t);						\
+	(__ia64_islfo_task->thread.last_fph_cpu == smp_processor_id()				\
+	 && __ia64_islfo_task == (struct task_struct *) ia64_get_kr(IA64_KR_FPU_OWNER));	\
+})
+
+/*
+ * Mark task T as owning the fph partition of the CPU we're running on.
+ * Must be called from code that has preemption disabled.
+ */
+#define ia64_set_local_fpu_owner(t) do {						\
+	struct task_struct *__ia64_slfo_task = (t);					\
+	__ia64_slfo_task->thread.last_fph_cpu = smp_processor_id();			\
+	ia64_set_kr(IA64_KR_FPU_OWNER, (unsigned long) __ia64_slfo_task);		\
+} while (0)
+
+/* Mark the fph partition of task T as being invalid on all CPUs.  */
+#define ia64_drop_fpu(t)	((t)->thread.last_fph_cpu = -1)
+
+extern void __ia64_init_fpu (void);
+extern void __ia64_save_fpu (struct ia64_fpreg *fph);
+extern void __ia64_load_fpu (struct ia64_fpreg *fph);
+extern void ia64_save_debug_regs (unsigned long *save_area);
+extern void ia64_load_debug_regs (unsigned long *save_area);
+
+#ifdef CONFIG_IA32_SUPPORT
+extern void ia32_save_state (struct task_struct *task);
+extern void ia32_load_state (struct task_struct *task);
+#endif
+
+#define ia64_fph_enable()	do { ia64_rsm(IA64_PSR_DFH); ia64_srlz_d(); } while (0)
+#define ia64_fph_disable()	do { ia64_ssm(IA64_PSR_DFH); ia64_srlz_d(); } while (0)
+
+/* load fp 0.0 into fph */
+static inline void
+ia64_init_fpu (void) {
+	ia64_fph_enable();
+	__ia64_init_fpu();
+	ia64_fph_disable();
+}
+
+/* save f32-f127 at FPH */
+static inline void
+ia64_save_fpu (struct ia64_fpreg *fph) {
+	ia64_fph_enable();
+	__ia64_save_fpu(fph);
+	ia64_fph_disable();
+}
+
+/* load f32-f127 from FPH */
+static inline void
+ia64_load_fpu (struct ia64_fpreg *fph) {
+	ia64_fph_enable();
+	__ia64_load_fpu(fph);
+	ia64_fph_disable();
+}
+
+static inline __u64
+ia64_clear_ic (void)
+{
+	__u64 psr;
+	psr = ia64_getreg(_IA64_REG_PSR);
+	ia64_stop();
+	ia64_rsm(IA64_PSR_I | IA64_PSR_IC);
+	ia64_srlz_i();
+	return psr;
+}
+
+/*
+ * Restore the psr.
+ */
+static inline void
+ia64_set_psr (__u64 psr)
+{
+	ia64_stop();
+	ia64_setreg(_IA64_REG_PSR_L, psr);
+	ia64_srlz_i();
+}
+
+/*
+ * Insert a translation into an instruction and/or data translation
+ * register.
+ */
+static inline void
+ia64_itr (__u64 target_mask, __u64 tr_num,
+	  __u64 vmaddr, __u64 pte,
+	  __u64 log_page_size)
+{
+	ia64_setreg(_IA64_REG_CR_ITIR, (log_page_size << 2));
+	ia64_setreg(_IA64_REG_CR_IFA, vmaddr);
+	ia64_stop();
+	if (target_mask & 0x1)
+		ia64_itri(tr_num, pte);
+	if (target_mask & 0x2)
+		ia64_itrd(tr_num, pte);
+}
+
+/*
+ * Insert a translation into the instruction and/or data translation
+ * cache.
+ */
+static inline void
+ia64_itc (__u64 target_mask, __u64 vmaddr, __u64 pte,
+	  __u64 log_page_size)
+{
+	ia64_setreg(_IA64_REG_CR_ITIR, (log_page_size << 2));
+	ia64_setreg(_IA64_REG_CR_IFA, vmaddr);
+	ia64_stop();
+	/* as per EAS2.6, itc must be the last instruction in an instruction group */
+	if (target_mask & 0x1)
+		ia64_itci(pte);
+	if (target_mask & 0x2)
+		ia64_itcd(pte);
+}
+
+/*
+ * Purge a range of addresses from instruction and/or data translation
+ * register(s).
+ */
+static inline void
+ia64_ptr (__u64 target_mask, __u64 vmaddr, __u64 log_size)
+{
+	if (target_mask & 0x1)
+		ia64_ptri(vmaddr, (log_size << 2));
+	if (target_mask & 0x2)
+		ia64_ptrd(vmaddr, (log_size << 2));
+}
+
+/* Set the interrupt vector address.  The address must be suitably aligned (32KB).  */
+static inline void
+ia64_set_iva (void *ivt_addr)
+{
+	ia64_setreg(_IA64_REG_CR_IVA, (__u64) ivt_addr);
+	ia64_srlz_i();
+}
+
+/* Set the page table address and control bits.  */
+static inline void
+ia64_set_pta (__u64 pta)
+{
+	/* Note: srlz.i implies srlz.d */
+	ia64_setreg(_IA64_REG_CR_PTA, pta);
+	ia64_srlz_i();
+}
+
+static inline void
+ia64_eoi (void)
+{
+	ia64_setreg(_IA64_REG_CR_EOI, 0);
+	ia64_srlz_d();
+}
+
+#define cpu_relax()	ia64_hint(ia64_hint_pause)
+
+static inline int
+ia64_get_irr(unsigned int vector)
+{
+	unsigned int reg = vector / 64;
+	unsigned int bit = vector % 64;
+	u64 irr;
+
+	switch (reg) {
+	case 0: irr = ia64_getreg(_IA64_REG_CR_IRR0); break;
+	case 1: irr = ia64_getreg(_IA64_REG_CR_IRR1); break;
+	case 2: irr = ia64_getreg(_IA64_REG_CR_IRR2); break;
+	case 3: irr = ia64_getreg(_IA64_REG_CR_IRR3); break;
+	}
+
+	return test_bit(bit, &irr);
+}
+
+static inline void
+ia64_set_lrr0 (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_CR_LRR0, val);
+	ia64_srlz_d();
+}
+
+static inline void
+ia64_set_lrr1 (unsigned long val)
+{
+	ia64_setreg(_IA64_REG_CR_LRR1, val);
+	ia64_srlz_d();
+}
+
+
+/*
+ * Given the address to which a spill occurred, return the unat bit
+ * number that corresponds to this address.
+ */
+static inline __u64
+ia64_unat_pos (void *spill_addr)
+{
+	return ((__u64) spill_addr >> 3) & 0x3f;
+}
+
+/*
+ * Set the NaT bit of an integer register which was spilled at address
+ * SPILL_ADDR.  UNAT is the mask to be updated.
+ */
+static inline void
+ia64_set_unat (__u64 *unat, void *spill_addr, unsigned long nat)
+{
+	__u64 bit = ia64_unat_pos(spill_addr);
+	__u64 mask = 1UL << bit;
+
+	*unat = (*unat & ~mask) | (nat << bit);
+}
+
+/*
+ * Return saved PC of a blocked thread.
+ * Note that the only way T can block is through a call to schedule() -> switch_to().
+ */
+static inline unsigned long
+thread_saved_pc (struct task_struct *t)
+{
+	struct unw_frame_info info;
+	unsigned long ip;
+
+	unw_init_from_blocked_task(&info, t);
+	if (unw_unwind(&info) < 0)
+		return 0;
+	unw_get_ip(&info, &ip);
+	return ip;
+}
+
+/*
+ * Get the current instruction/program counter value.
+ */
+#define current_text_addr() \
+	({ void *_pc; _pc = (void *)ia64_getreg(_IA64_REG_IP); _pc; })
+
+static inline __u64
+ia64_get_ivr (void)
+{
+	__u64 r;
+	ia64_srlz_d();
+	r = ia64_getreg(_IA64_REG_CR_IVR);
+	ia64_srlz_d();
+	return r;
+}
+
+static inline void
+ia64_set_dbr (__u64 regnum, __u64 value)
+{
+	__ia64_set_dbr(regnum, value);
+#ifdef CONFIG_ITANIUM
+	ia64_srlz_d();
+#endif
+}
+
+static inline __u64
+ia64_get_dbr (__u64 regnum)
+{
+	__u64 retval;
+
+	retval = __ia64_get_dbr(regnum);
+#ifdef CONFIG_ITANIUM
+	ia64_srlz_d();
+#endif
+	return retval;
+}
+
+static inline __u64
+ia64_rotr (__u64 w, __u64 n)
+{
+	return (w >> n) | (w << (64 - n));
+}
+
+#define ia64_rotl(w,n)	ia64_rotr((w), (64) - (n))
+
+/*
+ * Take a mapped kernel address and return the equivalent address
+ * in the region 7 identity mapped virtual area.
+ */
+static inline void *
+ia64_imva (void *addr)
+{
+	void *result;
+	result = (void *) ia64_tpa(addr);
+	return __va(result);
+}
+
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+#define PREFETCH_STRIDE			L1_CACHE_BYTES
+
+static inline void
+prefetch (const void *x)
+{
+	 ia64_lfetch(ia64_lfhint_none, x);
+}
+
+static inline void
+prefetchw (const void *x)
+{
+	ia64_lfetch_excl(ia64_lfhint_none, x);
+}
+
+#define spin_lock_prefetch(x)	prefetchw(x)
+
+extern unsigned long boot_option_idle_override;
+extern unsigned long idle_halt;
+extern unsigned long idle_nomwait;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_PROCESSOR_H */
diff --git a/arch/ia64/include/asm/ptrace.h b/arch/ia64/include/asm/ptrace.h
new file mode 100644
index 000000000000..15f8dcfe6eee
--- /dev/null
+++ b/arch/ia64/include/asm/ptrace.h
@@ -0,0 +1,364 @@
+#ifndef _ASM_IA64_PTRACE_H
+#define _ASM_IA64_PTRACE_H
+
+/*
+ * Copyright (C) 1998-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Stephane Eranian <eranian@hpl.hp.com>
+ * Copyright (C) 2003 Intel Co
+ *	Suresh Siddha <suresh.b.siddha@intel.com>
+ *	Fenghua Yu <fenghua.yu@intel.com>
+ *	Arun Sharma <arun.sharma@intel.com>
+ *
+ * 12/07/98	S. Eranian	added pt_regs & switch_stack
+ * 12/21/98	D. Mosberger	updated to match latest code
+ *  6/17/99	D. Mosberger	added second unat member to "struct switch_stack"
+ *
+ */
+/*
+ * When a user process is blocked, its state looks as follows:
+ *
+ *            +----------------------+	-------	IA64_STK_OFFSET
+ *     	      |			     |	 ^
+ *            | struct pt_regs       |	 |
+ *	      |			     |	 |
+ *            +----------------------+	 |
+ *	      |			     |	 |
+ *     	      |	   memory stack	     |	 |
+ *	      |	(growing downwards)  |	 |
+ *	      //.....................//	 |
+ *					 |
+ *	      //.....................//	 |
+ *	      |			     |	 |
+ *            +----------------------+	 |
+ *            | struct switch_stack  |	 |
+ *	      |			     |	 |
+ *	      +----------------------+	 |
+ *	      |			     |	 |
+ *	      //.....................//	 |
+ *					 |
+ *	      //.....................//	 |
+ *	      |			     |	 |
+ *	      |	 register stack	     |	 |
+ *	      |	(growing upwards)    |	 |
+ *            |			     |	 |
+ *	      +----------------------+	 |  ---	IA64_RBS_OFFSET
+ *            |  struct thread_info  |	 |  ^
+ *	      +----------------------+	 |  |
+ *	      |			     |	 |  |
+ *            |  struct task_struct  |	 |  |
+ * current -> |			     |   |  |
+ *	      +----------------------+ -------
+ *
+ * Note that ar.ec is not saved explicitly in pt_reg or switch_stack.
+ * This is because ar.ec is saved as part of ar.pfs.
+ */
+
+
+#include <asm/fpu.h>
+
+#ifdef __KERNEL__
+#ifndef ASM_OFFSETS_C
+#include <asm/asm-offsets.h>
+#endif
+
+/*
+ * Base-2 logarithm of number of pages to allocate per task structure
+ * (including register backing store and memory stack):
+ */
+#if defined(CONFIG_IA64_PAGE_SIZE_4KB)
+# define KERNEL_STACK_SIZE_ORDER		3
+#elif defined(CONFIG_IA64_PAGE_SIZE_8KB)
+# define KERNEL_STACK_SIZE_ORDER		2
+#elif defined(CONFIG_IA64_PAGE_SIZE_16KB)
+# define KERNEL_STACK_SIZE_ORDER		1
+#else
+# define KERNEL_STACK_SIZE_ORDER		0
+#endif
+
+#define IA64_RBS_OFFSET			((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 31) & ~31)
+#define IA64_STK_OFFSET			((1 << KERNEL_STACK_SIZE_ORDER)*PAGE_SIZE)
+
+#define KERNEL_STACK_SIZE		IA64_STK_OFFSET
+
+#endif /* __KERNEL__ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This struct defines the way the registers are saved on system
+ * calls.
+ *
+ * We don't save all floating point register because the kernel
+ * is compiled to use only a very small subset, so the other are
+ * untouched.
+ *
+ * THIS STRUCTURE MUST BE A MULTIPLE 16-BYTE IN SIZE
+ * (because the memory stack pointer MUST ALWAYS be aligned this way)
+ *
+ */
+struct pt_regs {
+	/* The following registers are saved by SAVE_MIN: */
+	unsigned long b6;		/* scratch */
+	unsigned long b7;		/* scratch */
+
+	unsigned long ar_csd;           /* used by cmp8xchg16 (scratch) */
+	unsigned long ar_ssd;           /* reserved for future use (scratch) */
+
+	unsigned long r8;		/* scratch (return value register 0) */
+	unsigned long r9;		/* scratch (return value register 1) */
+	unsigned long r10;		/* scratch (return value register 2) */
+	unsigned long r11;		/* scratch (return value register 3) */
+
+	unsigned long cr_ipsr;		/* interrupted task's psr */
+	unsigned long cr_iip;		/* interrupted task's instruction pointer */
+	/*
+	 * interrupted task's function state; if bit 63 is cleared, it
+	 * contains syscall's ar.pfs.pfm:
+	 */
+	unsigned long cr_ifs;
+
+	unsigned long ar_unat;		/* interrupted task's NaT register (preserved) */
+	unsigned long ar_pfs;		/* prev function state  */
+	unsigned long ar_rsc;		/* RSE configuration */
+	/* The following two are valid only if cr_ipsr.cpl > 0 || ti->flags & _TIF_MCA_INIT */
+	unsigned long ar_rnat;		/* RSE NaT */
+	unsigned long ar_bspstore;	/* RSE bspstore */
+
+	unsigned long pr;		/* 64 predicate registers (1 bit each) */
+	unsigned long b0;		/* return pointer (bp) */
+	unsigned long loadrs;		/* size of dirty partition << 16 */
+
+	unsigned long r1;		/* the gp pointer */
+	unsigned long r12;		/* interrupted task's memory stack pointer */
+	unsigned long r13;		/* thread pointer */
+
+	unsigned long ar_fpsr;		/* floating point status (preserved) */
+	unsigned long r15;		/* scratch */
+
+	/* The remaining registers are NOT saved for system calls.  */
+
+	unsigned long r14;		/* scratch */
+	unsigned long r2;		/* scratch */
+	unsigned long r3;		/* scratch */
+
+	/* The following registers are saved by SAVE_REST: */
+	unsigned long r16;		/* scratch */
+	unsigned long r17;		/* scratch */
+	unsigned long r18;		/* scratch */
+	unsigned long r19;		/* scratch */
+	unsigned long r20;		/* scratch */
+	unsigned long r21;		/* scratch */
+	unsigned long r22;		/* scratch */
+	unsigned long r23;		/* scratch */
+	unsigned long r24;		/* scratch */
+	unsigned long r25;		/* scratch */
+	unsigned long r26;		/* scratch */
+	unsigned long r27;		/* scratch */
+	unsigned long r28;		/* scratch */
+	unsigned long r29;		/* scratch */
+	unsigned long r30;		/* scratch */
+	unsigned long r31;		/* scratch */
+
+	unsigned long ar_ccv;		/* compare/exchange value (scratch) */
+
+	/*
+	 * Floating point registers that the kernel considers scratch:
+	 */
+	struct ia64_fpreg f6;		/* scratch */
+	struct ia64_fpreg f7;		/* scratch */
+	struct ia64_fpreg f8;		/* scratch */
+	struct ia64_fpreg f9;		/* scratch */
+	struct ia64_fpreg f10;		/* scratch */
+	struct ia64_fpreg f11;		/* scratch */
+};
+
+/*
+ * This structure contains the addition registers that need to
+ * preserved across a context switch.  This generally consists of
+ * "preserved" registers.
+ */
+struct switch_stack {
+	unsigned long caller_unat;	/* user NaT collection register (preserved) */
+	unsigned long ar_fpsr;		/* floating-point status register */
+
+	struct ia64_fpreg f2;		/* preserved */
+	struct ia64_fpreg f3;		/* preserved */
+	struct ia64_fpreg f4;		/* preserved */
+	struct ia64_fpreg f5;		/* preserved */
+
+	struct ia64_fpreg f12;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f13;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f14;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f15;		/* scratch, but untouched by kernel */
+	struct ia64_fpreg f16;		/* preserved */
+	struct ia64_fpreg f17;		/* preserved */
+	struct ia64_fpreg f18;		/* preserved */
+	struct ia64_fpreg f19;		/* preserved */
+	struct ia64_fpreg f20;		/* preserved */
+	struct ia64_fpreg f21;		/* preserved */
+	struct ia64_fpreg f22;		/* preserved */
+	struct ia64_fpreg f23;		/* preserved */
+	struct ia64_fpreg f24;		/* preserved */
+	struct ia64_fpreg f25;		/* preserved */
+	struct ia64_fpreg f26;		/* preserved */
+	struct ia64_fpreg f27;		/* preserved */
+	struct ia64_fpreg f28;		/* preserved */
+	struct ia64_fpreg f29;		/* preserved */
+	struct ia64_fpreg f30;		/* preserved */
+	struct ia64_fpreg f31;		/* preserved */
+
+	unsigned long r4;		/* preserved */
+	unsigned long r5;		/* preserved */
+	unsigned long r6;		/* preserved */
+	unsigned long r7;		/* preserved */
+
+	unsigned long b0;		/* so we can force a direct return in copy_thread */
+	unsigned long b1;
+	unsigned long b2;
+	unsigned long b3;
+	unsigned long b4;
+	unsigned long b5;
+
+	unsigned long ar_pfs;		/* previous function state */
+	unsigned long ar_lc;		/* loop counter (preserved) */
+	unsigned long ar_unat;		/* NaT bits for r4-r7 */
+	unsigned long ar_rnat;		/* RSE NaT collection register */
+	unsigned long ar_bspstore;	/* RSE dirty base (preserved) */
+	unsigned long pr;		/* 64 predicate registers (1 bit each) */
+};
+
+#ifdef __KERNEL__
+
+#include <asm/current.h>
+#include <asm/page.h>
+
+/*
+ * We use the ia64_psr(regs)->ri to determine which of the three
+ * instructions in bundle (16 bytes) took the sample. Generate
+ * the canonical representation by adding to instruction pointer.
+ */
+# define instruction_pointer(regs) ((regs)->cr_iip + ia64_psr(regs)->ri)
+
+#define regs_return_value(regs) ((regs)->r8)
+
+/* Conserve space in histogram by encoding slot bits in address
+ * bits 2 and 3 rather than bits 0 and 1.
+ */
+#define profile_pc(regs)						\
+({									\
+	unsigned long __ip = instruction_pointer(regs);			\
+	(__ip & ~3UL) + ((__ip & 3UL) << 2);				\
+})
+
+  /* given a pointer to a task_struct, return the user's pt_regs */
+# define task_pt_regs(t)		(((struct pt_regs *) ((char *) (t) + IA64_STK_OFFSET)) - 1)
+# define ia64_psr(regs)			((struct ia64_psr *) &(regs)->cr_ipsr)
+# define user_mode(regs)		(((struct ia64_psr *) &(regs)->cr_ipsr)->cpl != 0)
+# define user_stack(task,regs)	((long) regs - (long) task == IA64_STK_OFFSET - sizeof(*regs))
+# define fsys_mode(task,regs)					\
+  ({								\
+	  struct task_struct *_task = (task);			\
+	  struct pt_regs *_regs = (regs);			\
+	  !user_mode(_regs) && user_stack(_task, _regs);	\
+  })
+
+  /*
+   * System call handlers that, upon successful completion, need to return a negative value
+   * should call force_successful_syscall_return() right before returning.  On architectures
+   * where the syscall convention provides for a separate error flag (e.g., alpha, ia64,
+   * ppc{,64}, sparc{,64}, possibly others), this macro can be used to ensure that the error
+   * flag will not get set.  On architectures which do not support a separate error flag,
+   * the macro is a no-op and the spurious error condition needs to be filtered out by some
+   * other means (e.g., in user-level, by passing an extra argument to the syscall handler,
+   * or something along those lines).
+   *
+   * On ia64, we can clear the user's pt_regs->r8 to force a successful syscall.
+   */
+# define force_successful_syscall_return()	(task_pt_regs(current)->r8 = 0)
+
+  struct task_struct;			/* forward decl */
+  struct unw_frame_info;		/* forward decl */
+
+  extern void show_regs (struct pt_regs *);
+  extern void ia64_do_show_stack (struct unw_frame_info *, void *);
+  extern unsigned long ia64_get_user_rbs_end (struct task_struct *, struct pt_regs *,
+					      unsigned long *);
+  extern long ia64_peek (struct task_struct *, struct switch_stack *, unsigned long,
+			 unsigned long, long *);
+  extern long ia64_poke (struct task_struct *, struct switch_stack *, unsigned long,
+			 unsigned long, long);
+  extern void ia64_flush_fph (struct task_struct *);
+  extern void ia64_sync_fph (struct task_struct *);
+  extern void ia64_sync_krbs(void);
+  extern long ia64_sync_user_rbs (struct task_struct *, struct switch_stack *,
+				  unsigned long, unsigned long);
+
+  /* get nat bits for scratch registers such that bit N==1 iff scratch register rN is a NaT */
+  extern unsigned long ia64_get_scratch_nat_bits (struct pt_regs *pt, unsigned long scratch_unat);
+  /* put nat bits for scratch registers such that scratch register rN is a NaT iff bit N==1 */
+  extern unsigned long ia64_put_scratch_nat_bits (struct pt_regs *pt, unsigned long nat);
+
+  extern void ia64_increment_ip (struct pt_regs *pt);
+  extern void ia64_decrement_ip (struct pt_regs *pt);
+
+  extern void ia64_ptrace_stop(void);
+  #define arch_ptrace_stop(code, info) \
+	ia64_ptrace_stop()
+  #define arch_ptrace_stop_needed(code, info) \
+	(!test_thread_flag(TIF_RESTORE_RSE))
+
+  extern void ptrace_attach_sync_user_rbs (struct task_struct *);
+  #define arch_ptrace_attach(child) \
+	ptrace_attach_sync_user_rbs(child)
+
+  #define arch_has_single_step()  (1)
+  extern void user_enable_single_step(struct task_struct *);
+  extern void user_disable_single_step(struct task_struct *);
+
+  #define arch_has_block_step()   (1)
+  extern void user_enable_block_step(struct task_struct *);
+
+#endif /* !__KERNEL__ */
+
+/* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */
+struct pt_all_user_regs {
+	unsigned long nat;
+	unsigned long cr_iip;
+	unsigned long cfm;
+	unsigned long cr_ipsr;
+	unsigned long pr;
+
+	unsigned long gr[32];
+	unsigned long br[8];
+	unsigned long ar[128];
+	struct ia64_fpreg fr[128];
+};
+
+#endif /* !__ASSEMBLY__ */
+
+/* indices to application-registers array in pt_all_user_regs */
+#define PT_AUR_RSC	16
+#define PT_AUR_BSP	17
+#define PT_AUR_BSPSTORE	18
+#define PT_AUR_RNAT	19
+#define PT_AUR_CCV	32
+#define PT_AUR_UNAT	36
+#define PT_AUR_FPSR	40
+#define PT_AUR_PFS	64
+#define PT_AUR_LC	65
+#define PT_AUR_EC	66
+
+/*
+ * The numbers chosen here are somewhat arbitrary but absolutely MUST
+ * not overlap with any of the number assigned in <linux/ptrace.h>.
+ */
+#define PTRACE_SINGLEBLOCK	12	/* resume execution until next branch */
+#define PTRACE_OLD_GETSIGINFO	13	/* (replaced by PTRACE_GETSIGINFO in <linux/ptrace.h>)  */
+#define PTRACE_OLD_SETSIGINFO	14	/* (replaced by PTRACE_SETSIGINFO in <linux/ptrace.h>)  */
+#define PTRACE_GETREGS		18	/* get all registers (pt_all_user_regs) in one shot */
+#define PTRACE_SETREGS		19	/* set all registers (pt_all_user_regs) in one shot */
+
+#define PTRACE_OLDSETOPTIONS	21
+
+#endif /* _ASM_IA64_PTRACE_H */
diff --git a/arch/ia64/include/asm/ptrace_offsets.h b/arch/ia64/include/asm/ptrace_offsets.h
new file mode 100644
index 000000000000..b712773c759e
--- /dev/null
+++ b/arch/ia64/include/asm/ptrace_offsets.h
@@ -0,0 +1,268 @@
+#ifndef _ASM_IA64_PTRACE_OFFSETS_H
+#define _ASM_IA64_PTRACE_OFFSETS_H
+
+/*
+ * Copyright (C) 1999, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * The "uarea" that can be accessed via PEEKUSER and POKEUSER is a
+ * virtual structure that would have the following definition:
+ *
+ *	struct uarea {
+ *		struct ia64_fpreg fph[96];		// f32-f127
+ *		unsigned long nat_bits;
+ *		unsigned long empty1;
+ *		struct ia64_fpreg f2;			// f2-f5
+ *			:
+ *		struct ia64_fpreg f5;
+ *		struct ia64_fpreg f10;			// f10-f31
+ *			:
+ *		struct ia64_fpreg f31;
+ *		unsigned long r4;			// r4-r7
+ *			:
+ *		unsigned long r7;
+ *		unsigned long b1;			// b1-b5
+ *			:
+ *		unsigned long b5;
+ *		unsigned long ar_ec;
+ *		unsigned long ar_lc;
+ *		unsigned long empty2[5];
+ *		unsigned long cr_ipsr;
+ *		unsigned long cr_iip;
+ *		unsigned long cfm;
+ *		unsigned long ar_unat;
+ *		unsigned long ar_pfs;
+ *		unsigned long ar_rsc;
+ *		unsigned long ar_rnat;
+ *		unsigned long ar_bspstore;
+ *		unsigned long pr;
+ *		unsigned long b6;
+ *		unsigned long ar_bsp;
+ *		unsigned long r1;
+ *		unsigned long r2;
+ *		unsigned long r3;
+ *		unsigned long r12;
+ *		unsigned long r13;
+ *		unsigned long r14;
+ *		unsigned long r15;
+ *		unsigned long r8;
+ *		unsigned long r9;
+ *		unsigned long r10;
+ *		unsigned long r11;
+ *		unsigned long r16;
+ *			:
+ *		unsigned long r31;
+ *		unsigned long ar_ccv;
+ *		unsigned long ar_fpsr;
+ *		unsigned long b0;
+ *		unsigned long b7;
+ *		unsigned long f6;
+ *		unsigned long f7;
+ *		unsigned long f8;
+ *		unsigned long f9;
+ *		unsigned long ar_csd;
+ *		unsigned long ar_ssd;
+ *		unsigned long rsvd1[710];
+ *		unsigned long dbr[8];
+ *		unsigned long rsvd2[504];
+ *		unsigned long ibr[8];
+ *		unsigned long rsvd3[504];
+ *		unsigned long pmd[4];
+ *	}
+ */
+
+/* fph: */
+#define PT_F32			0x0000
+#define PT_F33			0x0010
+#define PT_F34			0x0020
+#define PT_F35			0x0030
+#define PT_F36			0x0040
+#define PT_F37			0x0050
+#define PT_F38			0x0060
+#define PT_F39			0x0070
+#define PT_F40			0x0080
+#define PT_F41			0x0090
+#define PT_F42			0x00a0
+#define PT_F43			0x00b0
+#define PT_F44			0x00c0
+#define PT_F45			0x00d0
+#define PT_F46			0x00e0
+#define PT_F47			0x00f0
+#define PT_F48			0x0100
+#define PT_F49			0x0110
+#define PT_F50			0x0120
+#define PT_F51			0x0130
+#define PT_F52			0x0140
+#define PT_F53			0x0150
+#define PT_F54			0x0160
+#define PT_F55			0x0170
+#define PT_F56			0x0180
+#define PT_F57			0x0190
+#define PT_F58			0x01a0
+#define PT_F59			0x01b0
+#define PT_F60			0x01c0
+#define PT_F61			0x01d0
+#define PT_F62			0x01e0
+#define PT_F63			0x01f0
+#define PT_F64			0x0200
+#define PT_F65			0x0210
+#define PT_F66			0x0220
+#define PT_F67			0x0230
+#define PT_F68			0x0240
+#define PT_F69			0x0250
+#define PT_F70			0x0260
+#define PT_F71			0x0270
+#define PT_F72			0x0280
+#define PT_F73			0x0290
+#define PT_F74			0x02a0
+#define PT_F75			0x02b0
+#define PT_F76			0x02c0
+#define PT_F77			0x02d0
+#define PT_F78			0x02e0
+#define PT_F79			0x02f0
+#define PT_F80			0x0300
+#define PT_F81			0x0310
+#define PT_F82			0x0320
+#define PT_F83			0x0330
+#define PT_F84			0x0340
+#define PT_F85			0x0350
+#define PT_F86			0x0360
+#define PT_F87			0x0370
+#define PT_F88			0x0380
+#define PT_F89			0x0390
+#define PT_F90			0x03a0
+#define PT_F91			0x03b0
+#define PT_F92			0x03c0
+#define PT_F93			0x03d0
+#define PT_F94			0x03e0
+#define PT_F95			0x03f0
+#define PT_F96			0x0400
+#define PT_F97			0x0410
+#define PT_F98			0x0420
+#define PT_F99			0x0430
+#define PT_F100			0x0440
+#define PT_F101			0x0450
+#define PT_F102			0x0460
+#define PT_F103			0x0470
+#define PT_F104			0x0480
+#define PT_F105			0x0490
+#define PT_F106			0x04a0
+#define PT_F107			0x04b0
+#define PT_F108			0x04c0
+#define PT_F109			0x04d0
+#define PT_F110			0x04e0
+#define PT_F111			0x04f0
+#define PT_F112			0x0500
+#define PT_F113			0x0510
+#define PT_F114			0x0520
+#define PT_F115			0x0530
+#define PT_F116			0x0540
+#define PT_F117			0x0550
+#define PT_F118			0x0560
+#define PT_F119			0x0570
+#define PT_F120			0x0580
+#define PT_F121			0x0590
+#define PT_F122			0x05a0
+#define PT_F123			0x05b0
+#define PT_F124			0x05c0
+#define PT_F125			0x05d0
+#define PT_F126			0x05e0
+#define PT_F127			0x05f0
+
+#define PT_NAT_BITS		0x0600
+
+#define PT_F2			0x0610
+#define PT_F3			0x0620
+#define PT_F4			0x0630
+#define PT_F5			0x0640
+#define PT_F10			0x0650
+#define PT_F11			0x0660
+#define PT_F12			0x0670
+#define PT_F13			0x0680
+#define PT_F14			0x0690
+#define PT_F15			0x06a0
+#define PT_F16			0x06b0
+#define PT_F17			0x06c0
+#define PT_F18			0x06d0
+#define PT_F19			0x06e0
+#define PT_F20			0x06f0
+#define PT_F21			0x0700
+#define PT_F22			0x0710
+#define PT_F23			0x0720
+#define PT_F24			0x0730
+#define PT_F25			0x0740
+#define PT_F26			0x0750
+#define PT_F27			0x0760
+#define PT_F28			0x0770
+#define PT_F29			0x0780
+#define PT_F30			0x0790
+#define PT_F31			0x07a0
+#define PT_R4			0x07b0
+#define PT_R5			0x07b8
+#define PT_R6			0x07c0
+#define PT_R7			0x07c8
+
+#define PT_B1			0x07d8
+#define PT_B2			0x07e0
+#define PT_B3			0x07e8
+#define PT_B4			0x07f0
+#define PT_B5			0x07f8
+
+#define PT_AR_EC		0x0800
+#define PT_AR_LC		0x0808
+
+#define PT_CR_IPSR		0x0830
+#define PT_CR_IIP		0x0838
+#define PT_CFM			0x0840
+#define PT_AR_UNAT		0x0848
+#define PT_AR_PFS		0x0850
+#define PT_AR_RSC		0x0858
+#define PT_AR_RNAT		0x0860
+#define PT_AR_BSPSTORE		0x0868
+#define PT_PR			0x0870
+#define PT_B6			0x0878
+#define PT_AR_BSP		0x0880	/* note: this points to the *end* of the backing store! */
+#define PT_R1			0x0888
+#define PT_R2			0x0890
+#define PT_R3			0x0898
+#define PT_R12			0x08a0
+#define PT_R13			0x08a8
+#define PT_R14			0x08b0
+#define PT_R15			0x08b8
+#define PT_R8 			0x08c0
+#define PT_R9			0x08c8
+#define PT_R10			0x08d0
+#define PT_R11			0x08d8
+#define PT_R16			0x08e0
+#define PT_R17			0x08e8
+#define PT_R18			0x08f0
+#define PT_R19			0x08f8
+#define PT_R20			0x0900
+#define PT_R21			0x0908
+#define PT_R22			0x0910
+#define PT_R23			0x0918
+#define PT_R24			0x0920
+#define PT_R25			0x0928
+#define PT_R26			0x0930
+#define PT_R27			0x0938
+#define PT_R28			0x0940
+#define PT_R29			0x0948
+#define PT_R30			0x0950
+#define PT_R31			0x0958
+#define PT_AR_CCV		0x0960
+#define PT_AR_FPSR		0x0968
+#define PT_B0			0x0970
+#define PT_B7			0x0978
+#define PT_F6			0x0980
+#define PT_F7			0x0990
+#define PT_F8			0x09a0
+#define PT_F9			0x09b0
+#define PT_AR_CSD		0x09c0
+#define PT_AR_SSD		0x09c8
+
+#define PT_DBR			0x2000	/* data breakpoint registers */
+#define PT_IBR			0x3000	/* instruction breakpoint registers */
+#define PT_PMD			0x4000	/* performance monitoring counters */
+
+#endif /* _ASM_IA64_PTRACE_OFFSETS_H */
diff --git a/arch/ia64/include/asm/resource.h b/arch/ia64/include/asm/resource.h
new file mode 100644
index 000000000000..ba2272a87fc7
--- /dev/null
+++ b/arch/ia64/include/asm/resource.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_IA64_RESOURCE_H
+#define _ASM_IA64_RESOURCE_H
+
+#include <asm/ustack.h>
+#include <asm-generic/resource.h>
+
+#endif /* _ASM_IA64_RESOURCE_H */
diff --git a/arch/ia64/include/asm/rse.h b/arch/ia64/include/asm/rse.h
new file mode 100644
index 000000000000..02830a3b0196
--- /dev/null
+++ b/arch/ia64/include/asm/rse.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_IA64_RSE_H
+#define _ASM_IA64_RSE_H
+
+/*
+ * Copyright (C) 1998, 1999 Hewlett-Packard Co
+ * Copyright (C) 1998, 1999 David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * Register stack engine related helper functions.  This file may be
+ * used in applications, so be careful about the name-space and give
+ * some consideration to non-GNU C compilers (though __inline__ is
+ * fine).
+ */
+
+static __inline__ unsigned long
+ia64_rse_slot_num (unsigned long *addr)
+{
+	return (((unsigned long) addr) >> 3) & 0x3f;
+}
+
+/*
+ * Return TRUE if ADDR is the address of an RNAT slot.
+ */
+static __inline__ unsigned long
+ia64_rse_is_rnat_slot (unsigned long *addr)
+{
+	return ia64_rse_slot_num(addr) == 0x3f;
+}
+
+/*
+ * Returns the address of the RNAT slot that covers the slot at
+ * address SLOT_ADDR.
+ */
+static __inline__ unsigned long *
+ia64_rse_rnat_addr (unsigned long *slot_addr)
+{
+	return (unsigned long *) ((unsigned long) slot_addr | (0x3f << 3));
+}
+
+/*
+ * Calculate the number of registers in the dirty partition starting at BSPSTORE and
+ * ending at BSP.  This isn't simply (BSP-BSPSTORE)/8 because every 64th slot stores
+ * ar.rnat.
+ */
+static __inline__ unsigned long
+ia64_rse_num_regs (unsigned long *bspstore, unsigned long *bsp)
+{
+	unsigned long slots = (bsp - bspstore);
+
+	return slots - (ia64_rse_slot_num(bspstore) + slots)/0x40;
+}
+
+/*
+ * The inverse of the above: given bspstore and the number of
+ * registers, calculate ar.bsp.
+ */
+static __inline__ unsigned long *
+ia64_rse_skip_regs (unsigned long *addr, long num_regs)
+{
+	long delta = ia64_rse_slot_num(addr) + num_regs;
+
+	if (num_regs < 0)
+		delta -= 0x3e;
+	return addr + num_regs + delta/0x3f;
+}
+
+#endif /* _ASM_IA64_RSE_H */
diff --git a/arch/ia64/include/asm/rwsem.h b/arch/ia64/include/asm/rwsem.h
new file mode 100644
index 000000000000..fbee74b15782
--- /dev/null
+++ b/arch/ia64/include/asm/rwsem.h
@@ -0,0 +1,182 @@
+/*
+ * R/W semaphores for ia64
+ *
+ * Copyright (C) 2003 Ken Chen <kenneth.w.chen@intel.com>
+ * Copyright (C) 2003 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 2005 Christoph Lameter <clameter@sgi.com>
+ *
+ * Based on asm-i386/rwsem.h and other architecture implementation.
+ *
+ * The MSW of the count is the negated number of active writers and
+ * waiting lockers, and the LSW is the total number of active locks.
+ *
+ * The lock count is initialized to 0 (no active and no waiting lockers).
+ *
+ * When a writer subtracts WRITE_BIAS, it'll get 0xffffffff00000001 for
+ * the case of an uncontended lock. Readers increment by 1 and see a positive
+ * value when uncontended, negative if there are writers (and maybe) readers
+ * waiting (in which case it goes to sleep).
+ */
+
+#ifndef _ASM_IA64_RWSEM_H
+#define _ASM_IA64_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
+#endif
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+#include <asm/intrinsics.h>
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	signed long		count;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+};
+
+#define RWSEM_UNLOCKED_VALUE		__IA64_UL_CONST(0x0000000000000000)
+#define RWSEM_ACTIVE_BIAS		__IA64_UL_CONST(0x0000000000000001)
+#define RWSEM_ACTIVE_MASK		__IA64_UL_CONST(0x00000000ffffffff)
+#define RWSEM_WAITING_BIAS		-__IA64_UL_CONST(0x0000000100000000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+#define __RWSEM_INITIALIZER(name) \
+	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+	  LIST_HEAD_INIT((name).wait_list) }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+static inline void
+init_rwsem (struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+}
+
+/*
+ * lock for reading
+ */
+static inline void
+__down_read (struct rw_semaphore *sem)
+{
+	long result = ia64_fetchadd8_acq((unsigned long *)&sem->count, 1);
+
+	if (result < 0)
+		rwsem_down_read_failed(sem);
+}
+
+/*
+ * lock for writing
+ */
+static inline void
+__down_write (struct rw_semaphore *sem)
+{
+	long old, new;
+
+	do {
+		old = sem->count;
+		new = old + RWSEM_ACTIVE_WRITE_BIAS;
+	} while (cmpxchg_acq(&sem->count, old, new) != old);
+
+	if (old != 0)
+		rwsem_down_write_failed(sem);
+}
+
+/*
+ * unlock after reading
+ */
+static inline void
+__up_read (struct rw_semaphore *sem)
+{
+	long result = ia64_fetchadd8_rel((unsigned long *)&sem->count, -1);
+
+	if (result < 0 && (--result & RWSEM_ACTIVE_MASK) == 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void
+__up_write (struct rw_semaphore *sem)
+{
+	long old, new;
+
+	do {
+		old = sem->count;
+		new = old - RWSEM_ACTIVE_WRITE_BIAS;
+	} while (cmpxchg_rel(&sem->count, old, new) != old);
+
+	if (new < 0 && (new & RWSEM_ACTIVE_MASK) == 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+static inline int
+__down_read_trylock (struct rw_semaphore *sem)
+{
+	long tmp;
+	while ((tmp = sem->count) >= 0) {
+		if (tmp == cmpxchg_acq(&sem->count, tmp, tmp+1)) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+static inline int
+__down_write_trylock (struct rw_semaphore *sem)
+{
+	long tmp = cmpxchg_acq(&sem->count, RWSEM_UNLOCKED_VALUE,
+			      RWSEM_ACTIVE_WRITE_BIAS);
+	return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void
+__downgrade_write (struct rw_semaphore *sem)
+{
+	long old, new;
+
+	do {
+		old = sem->count;
+		new = old - RWSEM_WAITING_BIAS;
+	} while (cmpxchg_rel(&sem->count, old, new) != old);
+
+	if (old < 0)
+		rwsem_downgrade_wake(sem);
+}
+
+/*
+ * Implement atomic add functionality.  These used to be "inline" functions, but GCC v3.1
+ * doesn't quite optimize this stuff right and ends up with bad calls to fetchandadd.
+ */
+#define rwsem_atomic_add(delta, sem)	atomic64_add(delta, (atomic64_t *)(&(sem)->count))
+#define rwsem_atomic_update(delta, sem)	atomic64_add_return(delta, (atomic64_t *)(&(sem)->count))
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif /* _ASM_IA64_RWSEM_H */
diff --git a/arch/ia64/include/asm/sal.h b/arch/ia64/include/asm/sal.h
new file mode 100644
index 000000000000..89594b442f83
--- /dev/null
+++ b/arch/ia64/include/asm/sal.h
@@ -0,0 +1,905 @@
+#ifndef _ASM_IA64_SAL_H
+#define _ASM_IA64_SAL_H
+
+/*
+ * System Abstraction Layer definitions.
+ *
+ * This is based on version 2.5 of the manual "IA-64 System
+ * Abstraction Layer".
+ *
+ * Copyright (C) 2001 Intel
+ * Copyright (C) 2002 Jenna Hall <jenna.s.hall@intel.com>
+ * Copyright (C) 2001 Fred Lewis <frederick.v.lewis@intel.com>
+ * Copyright (C) 1998, 1999, 2001, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Srinivasa Prasad Thirumalachar <sprasad@sprasad.engr.sgi.com>
+ *
+ * 02/01/04 J. Hall Updated Error Record Structures to conform to July 2001
+ *		    revision of the SAL spec.
+ * 01/01/03 fvlewis Updated Error Record Structures to conform with Nov. 2000
+ *                  revision of the SAL spec.
+ * 99/09/29 davidm	Updated for SAL 2.6.
+ * 00/03/29 cfleck      Updated SAL Error Logging info for processor (SAL 2.6)
+ *                      (plus examples of platform error info structures from smariset @ Intel)
+ */
+
+#define IA64_SAL_PLATFORM_FEATURE_BUS_LOCK_BIT		0
+#define IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT_BIT	1
+#define IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT_BIT	2
+#define IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT_BIT	 	3
+
+#define IA64_SAL_PLATFORM_FEATURE_BUS_LOCK	  (1<<IA64_SAL_PLATFORM_FEATURE_BUS_LOCK_BIT)
+#define IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT (1<<IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT_BIT)
+#define IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT (1<<IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT_BIT)
+#define IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT	  (1<<IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT_BIT)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/bcd.h>
+#include <linux/spinlock.h>
+#include <linux/efi.h>
+
+#include <asm/pal.h>
+#include <asm/system.h>
+#include <asm/fpu.h>
+
+extern spinlock_t sal_lock;
+
+/* SAL spec _requires_ eight args for each call. */
+#define __IA64_FW_CALL(entry,result,a0,a1,a2,a3,a4,a5,a6,a7)	\
+	result = (*entry)(a0,a1,a2,a3,a4,a5,a6,a7)
+
+# define IA64_FW_CALL(entry,result,args...) do {		\
+	unsigned long __ia64_sc_flags;				\
+	struct ia64_fpreg __ia64_sc_fr[6];			\
+	ia64_save_scratch_fpregs(__ia64_sc_fr);			\
+	spin_lock_irqsave(&sal_lock, __ia64_sc_flags);		\
+	__IA64_FW_CALL(entry, result, args);			\
+	spin_unlock_irqrestore(&sal_lock, __ia64_sc_flags);	\
+	ia64_load_scratch_fpregs(__ia64_sc_fr);			\
+} while (0)
+
+# define SAL_CALL(result,args...)			\
+	IA64_FW_CALL(ia64_sal, result, args);
+
+# define SAL_CALL_NOLOCK(result,args...) do {		\
+	unsigned long __ia64_scn_flags;			\
+	struct ia64_fpreg __ia64_scn_fr[6];		\
+	ia64_save_scratch_fpregs(__ia64_scn_fr);	\
+	local_irq_save(__ia64_scn_flags);		\
+	__IA64_FW_CALL(ia64_sal, result, args);		\
+	local_irq_restore(__ia64_scn_flags);		\
+	ia64_load_scratch_fpregs(__ia64_scn_fr);	\
+} while (0)
+
+# define SAL_CALL_REENTRANT(result,args...) do {	\
+	struct ia64_fpreg __ia64_scs_fr[6];		\
+	ia64_save_scratch_fpregs(__ia64_scs_fr);	\
+	preempt_disable();				\
+	__IA64_FW_CALL(ia64_sal, result, args);		\
+	preempt_enable();				\
+	ia64_load_scratch_fpregs(__ia64_scs_fr);	\
+} while (0)
+
+#define SAL_SET_VECTORS			0x01000000
+#define SAL_GET_STATE_INFO		0x01000001
+#define SAL_GET_STATE_INFO_SIZE		0x01000002
+#define SAL_CLEAR_STATE_INFO		0x01000003
+#define SAL_MC_RENDEZ			0x01000004
+#define SAL_MC_SET_PARAMS		0x01000005
+#define SAL_REGISTER_PHYSICAL_ADDR	0x01000006
+
+#define SAL_CACHE_FLUSH			0x01000008
+#define SAL_CACHE_INIT			0x01000009
+#define SAL_PCI_CONFIG_READ		0x01000010
+#define SAL_PCI_CONFIG_WRITE		0x01000011
+#define SAL_FREQ_BASE			0x01000012
+#define SAL_PHYSICAL_ID_INFO		0x01000013
+
+#define SAL_UPDATE_PAL			0x01000020
+
+struct ia64_sal_retval {
+	/*
+	 * A zero status value indicates call completed without error.
+	 * A negative status value indicates reason of call failure.
+	 * A positive status value indicates success but an
+	 * informational value should be printed (e.g., "reboot for
+	 * change to take effect").
+	 */
+	s64 status;
+	u64 v0;
+	u64 v1;
+	u64 v2;
+};
+
+typedef struct ia64_sal_retval (*ia64_sal_handler) (u64, ...);
+
+enum {
+	SAL_FREQ_BASE_PLATFORM = 0,
+	SAL_FREQ_BASE_INTERVAL_TIMER = 1,
+	SAL_FREQ_BASE_REALTIME_CLOCK = 2
+};
+
+/*
+ * The SAL system table is followed by a variable number of variable
+ * length descriptors.  The structure of these descriptors follows
+ * below.
+ * The defininition follows SAL specs from July 2000
+ */
+struct ia64_sal_systab {
+	u8 signature[4];	/* should be "SST_" */
+	u32 size;		/* size of this table in bytes */
+	u8 sal_rev_minor;
+	u8 sal_rev_major;
+	u16 entry_count;	/* # of entries in variable portion */
+	u8 checksum;
+	u8 reserved1[7];
+	u8 sal_a_rev_minor;
+	u8 sal_a_rev_major;
+	u8 sal_b_rev_minor;
+	u8 sal_b_rev_major;
+	/* oem_id & product_id: terminating NUL is missing if string is exactly 32 bytes long. */
+	u8 oem_id[32];
+	u8 product_id[32];	/* ASCII product id  */
+	u8 reserved2[8];
+};
+
+enum sal_systab_entry_type {
+	SAL_DESC_ENTRY_POINT = 0,
+	SAL_DESC_MEMORY = 1,
+	SAL_DESC_PLATFORM_FEATURE = 2,
+	SAL_DESC_TR = 3,
+	SAL_DESC_PTC = 4,
+	SAL_DESC_AP_WAKEUP = 5
+};
+
+/*
+ * Entry type:	Size:
+ *	0	48
+ *	1	32
+ *	2	16
+ *	3	32
+ *	4	16
+ *	5	16
+ */
+#define SAL_DESC_SIZE(type)	"\060\040\020\040\020\020"[(unsigned) type]
+
+typedef struct ia64_sal_desc_entry_point {
+	u8 type;
+	u8 reserved1[7];
+	u64 pal_proc;
+	u64 sal_proc;
+	u64 gp;
+	u8 reserved2[16];
+}ia64_sal_desc_entry_point_t;
+
+typedef struct ia64_sal_desc_memory {
+	u8 type;
+	u8 used_by_sal;	/* needs to be mapped for SAL? */
+	u8 mem_attr;		/* current memory attribute setting */
+	u8 access_rights;	/* access rights set up by SAL */
+	u8 mem_attr_mask;	/* mask of supported memory attributes */
+	u8 reserved1;
+	u8 mem_type;		/* memory type */
+	u8 mem_usage;		/* memory usage */
+	u64 addr;		/* physical address of memory */
+	u32 length;	/* length (multiple of 4KB pages) */
+	u32 reserved2;
+	u8 oem_reserved[8];
+} ia64_sal_desc_memory_t;
+
+typedef struct ia64_sal_desc_platform_feature {
+	u8 type;
+	u8 feature_mask;
+	u8 reserved1[14];
+} ia64_sal_desc_platform_feature_t;
+
+typedef struct ia64_sal_desc_tr {
+	u8 type;
+	u8 tr_type;		/* 0 == instruction, 1 == data */
+	u8 regnum;		/* translation register number */
+	u8 reserved1[5];
+	u64 addr;		/* virtual address of area covered */
+	u64 page_size;		/* encoded page size */
+	u8 reserved2[8];
+} ia64_sal_desc_tr_t;
+
+typedef struct ia64_sal_desc_ptc {
+	u8 type;
+	u8 reserved1[3];
+	u32 num_domains;	/* # of coherence domains */
+	u64 domain_info;	/* physical address of domain info table */
+} ia64_sal_desc_ptc_t;
+
+typedef struct ia64_sal_ptc_domain_info {
+	u64 proc_count;		/* number of processors in domain */
+	u64 proc_list;		/* physical address of LID array */
+} ia64_sal_ptc_domain_info_t;
+
+typedef struct ia64_sal_ptc_domain_proc_entry {
+	u64 id  : 8;		/* id of processor */
+	u64 eid : 8;		/* eid of processor */
+} ia64_sal_ptc_domain_proc_entry_t;
+
+
+#define IA64_SAL_AP_EXTERNAL_INT 0
+
+typedef struct ia64_sal_desc_ap_wakeup {
+	u8 type;
+	u8 mechanism;		/* 0 == external interrupt */
+	u8 reserved1[6];
+	u64 vector;		/* interrupt vector in range 0x10-0xff */
+} ia64_sal_desc_ap_wakeup_t ;
+
+extern ia64_sal_handler ia64_sal;
+extern struct ia64_sal_desc_ptc *ia64_ptc_domain_info;
+
+extern unsigned short sal_revision;	/* supported SAL spec revision */
+extern unsigned short sal_version;	/* SAL version; OEM dependent */
+#define SAL_VERSION_CODE(major, minor) ((BIN2BCD(major) << 8) | BIN2BCD(minor))
+
+extern const char *ia64_sal_strerror (long status);
+extern void ia64_sal_init (struct ia64_sal_systab *sal_systab);
+
+/* SAL information type encodings */
+enum {
+	SAL_INFO_TYPE_MCA  = 0,		/* Machine check abort information */
+        SAL_INFO_TYPE_INIT = 1,		/* Init information */
+        SAL_INFO_TYPE_CMC  = 2,		/* Corrected machine check information */
+        SAL_INFO_TYPE_CPE  = 3		/* Corrected platform error information */
+};
+
+/* Encodings for machine check parameter types */
+enum {
+	SAL_MC_PARAM_RENDEZ_INT    = 1,	/* Rendezvous interrupt */
+	SAL_MC_PARAM_RENDEZ_WAKEUP = 2,	/* Wakeup */
+	SAL_MC_PARAM_CPE_INT	   = 3	/* Corrected Platform Error Int */
+};
+
+/* Encodings for rendezvous mechanisms */
+enum {
+	SAL_MC_PARAM_MECHANISM_INT = 1,	/* Use interrupt */
+	SAL_MC_PARAM_MECHANISM_MEM = 2	/* Use memory synchronization variable*/
+};
+
+/* Encodings for vectors which can be registered by the OS with SAL */
+enum {
+	SAL_VECTOR_OS_MCA	  = 0,
+	SAL_VECTOR_OS_INIT	  = 1,
+	SAL_VECTOR_OS_BOOT_RENDEZ = 2
+};
+
+/* Encodings for mca_opt parameter sent to SAL_MC_SET_PARAMS */
+#define	SAL_MC_PARAM_RZ_ALWAYS		0x1
+#define	SAL_MC_PARAM_BINIT_ESCALATE	0x10
+
+/*
+ * Definition of the SAL Error Log from the SAL spec
+ */
+
+/* SAL Error Record Section GUID Definitions */
+#define SAL_PROC_DEV_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf1, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_MEM_DEV_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf2, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_SEL_DEV_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf3, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_PCI_BUS_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf4, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_SMBIOS_DEV_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf5, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_PCI_COMP_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf6, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_SPECIFIC_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf7, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_HOST_CTLR_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf8, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define SAL_PLAT_BUS_ERR_SECT_GUID  \
+    EFI_GUID(0xe429faf9, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
+#define PROCESSOR_ABSTRACTION_LAYER_OVERWRITE_GUID \
+    EFI_GUID(0x6cb0a200, 0x893a, 0x11da, 0x96, 0xd2, 0x0, 0x10, 0x83, 0xff, \
+		0xca, 0x4d)
+
+#define MAX_CACHE_ERRORS	6
+#define MAX_TLB_ERRORS		6
+#define MAX_BUS_ERRORS		1
+
+/* Definition of version  according to SAL spec for logging purposes */
+typedef struct sal_log_revision {
+	u8 minor;		/* BCD (0..99) */
+	u8 major;		/* BCD (0..99) */
+} sal_log_revision_t;
+
+/* Definition of timestamp according to SAL spec for logging purposes */
+typedef struct sal_log_timestamp {
+	u8 slh_second;		/* Second (0..59) */
+	u8 slh_minute;		/* Minute (0..59) */
+	u8 slh_hour;		/* Hour (0..23) */
+	u8 slh_reserved;
+	u8 slh_day;		/* Day (1..31) */
+	u8 slh_month;		/* Month (1..12) */
+	u8 slh_year;		/* Year (00..99) */
+	u8 slh_century;		/* Century (19, 20, 21, ...) */
+} sal_log_timestamp_t;
+
+/* Definition of log record  header structures */
+typedef struct sal_log_record_header {
+	u64 id;				/* Unique monotonically increasing ID */
+	sal_log_revision_t revision;	/* Major and Minor revision of header */
+	u8 severity;			/* Error Severity */
+	u8 validation_bits;		/* 0: platform_guid, 1: !timestamp */
+	u32 len;			/* Length of this error log in bytes */
+	sal_log_timestamp_t timestamp;	/* Timestamp */
+	efi_guid_t platform_guid;	/* Unique OEM Platform ID */
+} sal_log_record_header_t;
+
+#define sal_log_severity_recoverable	0
+#define sal_log_severity_fatal		1
+#define sal_log_severity_corrected	2
+
+/* Definition of log section header structures */
+typedef struct sal_log_sec_header {
+    efi_guid_t guid;			/* Unique Section ID */
+    sal_log_revision_t revision;	/* Major and Minor revision of Section */
+    u16 reserved;
+    u32 len;				/* Section length */
+} sal_log_section_hdr_t;
+
+typedef struct sal_log_mod_error_info {
+	struct {
+		u64 check_info              : 1,
+		    requestor_identifier    : 1,
+		    responder_identifier    : 1,
+		    target_identifier       : 1,
+		    precise_ip              : 1,
+		    reserved                : 59;
+	} valid;
+	u64 check_info;
+	u64 requestor_identifier;
+	u64 responder_identifier;
+	u64 target_identifier;
+	u64 precise_ip;
+} sal_log_mod_error_info_t;
+
+typedef struct sal_processor_static_info {
+	struct {
+		u64 minstate        : 1,
+		    br              : 1,
+		    cr              : 1,
+		    ar              : 1,
+		    rr              : 1,
+		    fr              : 1,
+		    reserved        : 58;
+	} valid;
+	pal_min_state_area_t min_state_area;
+	u64 br[8];
+	u64 cr[128];
+	u64 ar[128];
+	u64 rr[8];
+	struct ia64_fpreg __attribute__ ((packed)) fr[128];
+} sal_processor_static_info_t;
+
+struct sal_cpuid_info {
+	u64 regs[5];
+	u64 reserved;
+};
+
+typedef struct sal_log_processor_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 proc_error_map      : 1,
+		    proc_state_param    : 1,
+		    proc_cr_lid         : 1,
+		    psi_static_struct   : 1,
+		    num_cache_check     : 4,
+		    num_tlb_check       : 4,
+		    num_bus_check       : 4,
+		    num_reg_file_check  : 4,
+		    num_ms_check        : 4,
+		    cpuid_info          : 1,
+		    reserved1           : 39;
+	} valid;
+	u64 proc_error_map;
+	u64 proc_state_parameter;
+	u64 proc_cr_lid;
+	/*
+	 * The rest of this structure consists of variable-length arrays, which can't be
+	 * expressed in C.
+	 */
+	sal_log_mod_error_info_t info[0];
+	/*
+	 * This is what the rest looked like if C supported variable-length arrays:
+	 *
+	 * sal_log_mod_error_info_t cache_check_info[.valid.num_cache_check];
+	 * sal_log_mod_error_info_t tlb_check_info[.valid.num_tlb_check];
+	 * sal_log_mod_error_info_t bus_check_info[.valid.num_bus_check];
+	 * sal_log_mod_error_info_t reg_file_check_info[.valid.num_reg_file_check];
+	 * sal_log_mod_error_info_t ms_check_info[.valid.num_ms_check];
+	 * struct sal_cpuid_info cpuid_info;
+	 * sal_processor_static_info_t processor_static_info;
+	 */
+} sal_log_processor_info_t;
+
+/* Given a sal_log_processor_info_t pointer, return a pointer to the processor_static_info: */
+#define SAL_LPI_PSI_INFO(l)									\
+({	sal_log_processor_info_t *_l = (l);							\
+	((sal_processor_static_info_t *)							\
+	 ((char *) _l->info + ((_l->valid.num_cache_check + _l->valid.num_tlb_check		\
+				+ _l->valid.num_bus_check + _l->valid.num_reg_file_check	\
+				+ _l->valid.num_ms_check) * sizeof(sal_log_mod_error_info_t)	\
+			       + sizeof(struct sal_cpuid_info))));				\
+})
+
+/* platform error log structures */
+
+typedef struct sal_log_mem_dev_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 error_status    : 1,
+		    physical_addr   : 1,
+		    addr_mask       : 1,
+		    node            : 1,
+		    card            : 1,
+		    module          : 1,
+		    bank            : 1,
+		    device          : 1,
+		    row             : 1,
+		    column          : 1,
+		    bit_position    : 1,
+		    requestor_id    : 1,
+		    responder_id    : 1,
+		    target_id       : 1,
+		    bus_spec_data   : 1,
+		    oem_id          : 1,
+		    oem_data        : 1,
+		    reserved        : 47;
+	} valid;
+	u64 error_status;
+	u64 physical_addr;
+	u64 addr_mask;
+	u16 node;
+	u16 card;
+	u16 module;
+	u16 bank;
+	u16 device;
+	u16 row;
+	u16 column;
+	u16 bit_position;
+	u64 requestor_id;
+	u64 responder_id;
+	u64 target_id;
+	u64 bus_spec_data;
+	u8 oem_id[16];
+	u8 oem_data[1];			/* Variable length data */
+} sal_log_mem_dev_err_info_t;
+
+typedef struct sal_log_sel_dev_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 record_id       : 1,
+		    record_type     : 1,
+		    generator_id    : 1,
+		    evm_rev         : 1,
+		    sensor_type     : 1,
+		    sensor_num      : 1,
+		    event_dir       : 1,
+		    event_data1     : 1,
+		    event_data2     : 1,
+		    event_data3     : 1,
+		    reserved        : 54;
+	} valid;
+	u16 record_id;
+	u8 record_type;
+	u8 timestamp[4];
+	u16 generator_id;
+	u8 evm_rev;
+	u8 sensor_type;
+	u8 sensor_num;
+	u8 event_dir;
+	u8 event_data1;
+	u8 event_data2;
+	u8 event_data3;
+} sal_log_sel_dev_err_info_t;
+
+typedef struct sal_log_pci_bus_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    err_type        : 1,
+		    bus_id          : 1,
+		    bus_address     : 1,
+		    bus_data        : 1,
+		    bus_cmd         : 1,
+		    requestor_id    : 1,
+		    responder_id    : 1,
+		    target_id       : 1,
+		    oem_data        : 1,
+		    reserved        : 54;
+	} valid;
+	u64 err_status;
+	u16 err_type;
+	u16 bus_id;
+	u32 reserved;
+	u64 bus_address;
+	u64 bus_data;
+	u64 bus_cmd;
+	u64 requestor_id;
+	u64 responder_id;
+	u64 target_id;
+	u8 oem_data[1];			/* Variable length data */
+} sal_log_pci_bus_err_info_t;
+
+typedef struct sal_log_smbios_dev_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 event_type      : 1,
+		    length          : 1,
+		    time_stamp      : 1,
+		    data            : 1,
+		    reserved1       : 60;
+	} valid;
+	u8 event_type;
+	u8 length;
+	u8 time_stamp[6];
+	u8 data[1];			/* data of variable length, length == slsmb_length */
+} sal_log_smbios_dev_err_info_t;
+
+typedef struct sal_log_pci_comp_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    comp_info       : 1,
+		    num_mem_regs    : 1,
+		    num_io_regs     : 1,
+		    reg_data_pairs  : 1,
+		    oem_data        : 1,
+		    reserved        : 58;
+	} valid;
+	u64 err_status;
+	struct {
+		u16 vendor_id;
+		u16 device_id;
+		u8 class_code[3];
+		u8 func_num;
+		u8 dev_num;
+		u8 bus_num;
+		u8 seg_num;
+		u8 reserved[5];
+	} comp_info;
+	u32 num_mem_regs;
+	u32 num_io_regs;
+	u64 reg_data_pairs[1];
+	/*
+	 * array of address/data register pairs is num_mem_regs + num_io_regs elements
+	 * long.  Each array element consists of a u64 address followed by a u64 data
+	 * value.  The oem_data array immediately follows the reg_data_pairs array
+	 */
+	u8 oem_data[1];			/* Variable length data */
+} sal_log_pci_comp_err_info_t;
+
+typedef struct sal_log_plat_specific_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    guid            : 1,
+		    oem_data        : 1,
+		    reserved        : 61;
+	} valid;
+	u64 err_status;
+	efi_guid_t guid;
+	u8 oem_data[1];			/* platform specific variable length data */
+} sal_log_plat_specific_err_info_t;
+
+typedef struct sal_log_host_ctlr_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    requestor_id    : 1,
+		    responder_id    : 1,
+		    target_id       : 1,
+		    bus_spec_data   : 1,
+		    oem_data        : 1,
+		    reserved        : 58;
+	} valid;
+	u64 err_status;
+	u64 requestor_id;
+	u64 responder_id;
+	u64 target_id;
+	u64 bus_spec_data;
+	u8 oem_data[1];			/* Variable length OEM data */
+} sal_log_host_ctlr_err_info_t;
+
+typedef struct sal_log_plat_bus_err_info {
+	sal_log_section_hdr_t header;
+	struct {
+		u64 err_status      : 1,
+		    requestor_id    : 1,
+		    responder_id    : 1,
+		    target_id       : 1,
+		    bus_spec_data   : 1,
+		    oem_data        : 1,
+		    reserved        : 58;
+	} valid;
+	u64 err_status;
+	u64 requestor_id;
+	u64 responder_id;
+	u64 target_id;
+	u64 bus_spec_data;
+	u8 oem_data[1];			/* Variable length OEM data */
+} sal_log_plat_bus_err_info_t;
+
+/* Overall platform error section structure */
+typedef union sal_log_platform_err_info {
+	sal_log_mem_dev_err_info_t mem_dev_err;
+	sal_log_sel_dev_err_info_t sel_dev_err;
+	sal_log_pci_bus_err_info_t pci_bus_err;
+	sal_log_smbios_dev_err_info_t smbios_dev_err;
+	sal_log_pci_comp_err_info_t pci_comp_err;
+	sal_log_plat_specific_err_info_t plat_specific_err;
+	sal_log_host_ctlr_err_info_t host_ctlr_err;
+	sal_log_plat_bus_err_info_t plat_bus_err;
+} sal_log_platform_err_info_t;
+
+/* SAL log over-all, multi-section error record structure (processor+platform) */
+typedef struct err_rec {
+	sal_log_record_header_t sal_elog_header;
+	sal_log_processor_info_t proc_err;
+	sal_log_platform_err_info_t plat_err;
+	u8 oem_data_pad[1024];
+} ia64_err_rec_t;
+
+/*
+ * Now define a couple of inline functions for improved type checking
+ * and convenience.
+ */
+
+extern s64 ia64_sal_cache_flush (u64 cache_type);
+extern void __init check_sal_cache_flush (void);
+
+/* Initialize all the processor and platform level instruction and data caches */
+static inline s64
+ia64_sal_cache_init (void)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_CACHE_INIT, 0, 0, 0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+/*
+ * Clear the processor and platform information logged by SAL with respect to the machine
+ * state at the time of MCA's, INITs, CMCs, or CPEs.
+ */
+static inline s64
+ia64_sal_clear_state_info (u64 sal_info_type)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_REENTRANT(isrv, SAL_CLEAR_STATE_INFO, sal_info_type, 0,
+	              0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+
+/* Get the processor and platform information logged by SAL with respect to the machine
+ * state at the time of the MCAs, INITs, CMCs, or CPEs.
+ */
+static inline u64
+ia64_sal_get_state_info (u64 sal_info_type, u64 *sal_info)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_REENTRANT(isrv, SAL_GET_STATE_INFO, sal_info_type, 0,
+	              sal_info, 0, 0, 0, 0);
+	if (isrv.status)
+		return 0;
+
+	return isrv.v0;
+}
+
+/*
+ * Get the maximum size of the information logged by SAL with respect to the machine state
+ * at the time of MCAs, INITs, CMCs, or CPEs.
+ */
+static inline u64
+ia64_sal_get_state_info_size (u64 sal_info_type)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_REENTRANT(isrv, SAL_GET_STATE_INFO_SIZE, sal_info_type, 0,
+	              0, 0, 0, 0, 0);
+	if (isrv.status)
+		return 0;
+	return isrv.v0;
+}
+
+/*
+ * Causes the processor to go into a spin loop within SAL where SAL awaits a wakeup from
+ * the monarch processor.  Must not lock, because it will not return on any cpu until the
+ * monarch processor sends a wake up.
+ */
+static inline s64
+ia64_sal_mc_rendez (void)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_NOLOCK(isrv, SAL_MC_RENDEZ, 0, 0, 0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+/*
+ * Allow the OS to specify the interrupt number to be used by SAL to interrupt OS during
+ * the machine check rendezvous sequence as well as the mechanism to wake up the
+ * non-monarch processor at the end of machine check processing.
+ * Returns the complete ia64_sal_retval because some calls return more than just a status
+ * value.
+ */
+static inline struct ia64_sal_retval
+ia64_sal_mc_set_params (u64 param_type, u64 i_or_m, u64 i_or_m_val, u64 timeout, u64 rz_always)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_MC_SET_PARAMS, param_type, i_or_m, i_or_m_val,
+		 timeout, rz_always, 0, 0);
+	return isrv;
+}
+
+/* Read from PCI configuration space */
+static inline s64
+ia64_sal_pci_config_read (u64 pci_config_addr, int type, u64 size, u64 *value)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_PCI_CONFIG_READ, pci_config_addr, size, type, 0, 0, 0, 0);
+	if (value)
+		*value = isrv.v0;
+	return isrv.status;
+}
+
+/* Write to PCI configuration space */
+static inline s64
+ia64_sal_pci_config_write (u64 pci_config_addr, int type, u64 size, u64 value)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_PCI_CONFIG_WRITE, pci_config_addr, size, value,
+	         type, 0, 0, 0);
+	return isrv.status;
+}
+
+/*
+ * Register physical addresses of locations needed by SAL when SAL procedures are invoked
+ * in virtual mode.
+ */
+static inline s64
+ia64_sal_register_physical_addr (u64 phys_entry, u64 phys_addr)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_REGISTER_PHYSICAL_ADDR, phys_entry, phys_addr,
+	         0, 0, 0, 0, 0);
+	return isrv.status;
+}
+
+/*
+ * Register software dependent code locations within SAL. These locations are handlers or
+ * entry points where SAL will pass control for the specified event. These event handlers
+ * are for the bott rendezvous, MCAs and INIT scenarios.
+ */
+static inline s64
+ia64_sal_set_vectors (u64 vector_type,
+		      u64 handler_addr1, u64 gp1, u64 handler_len1,
+		      u64 handler_addr2, u64 gp2, u64 handler_len2)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_SET_VECTORS, vector_type,
+			handler_addr1, gp1, handler_len1,
+			handler_addr2, gp2, handler_len2);
+
+	return isrv.status;
+}
+
+/* Update the contents of PAL block in the non-volatile storage device */
+static inline s64
+ia64_sal_update_pal (u64 param_buf, u64 scratch_buf, u64 scratch_buf_size,
+		     u64 *error_code, u64 *scratch_buf_size_needed)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL(isrv, SAL_UPDATE_PAL, param_buf, scratch_buf, scratch_buf_size,
+	         0, 0, 0, 0);
+	if (error_code)
+		*error_code = isrv.v0;
+	if (scratch_buf_size_needed)
+		*scratch_buf_size_needed = isrv.v1;
+	return isrv.status;
+}
+
+/* Get physical processor die mapping in the platform. */
+static inline s64
+ia64_sal_physical_id_info(u16 *splid)
+{
+	struct ia64_sal_retval isrv;
+
+	if (sal_revision < SAL_VERSION_CODE(3,2))
+		return -1;
+
+	SAL_CALL(isrv, SAL_PHYSICAL_ID_INFO, 0, 0, 0, 0, 0, 0, 0);
+	if (splid)
+		*splid = isrv.v0;
+	return isrv.status;
+}
+
+extern unsigned long sal_platform_features;
+
+extern int (*salinfo_platform_oemdata)(const u8 *, u8 **, u64 *);
+
+struct sal_ret_values {
+	long r8; long r9; long r10; long r11;
+};
+
+#define IA64_SAL_OEMFUNC_MIN		0x02000000
+#define IA64_SAL_OEMFUNC_MAX		0x03ffffff
+
+extern int ia64_sal_oemcall(struct ia64_sal_retval *, u64, u64, u64, u64, u64,
+			    u64, u64, u64);
+extern int ia64_sal_oemcall_nolock(struct ia64_sal_retval *, u64, u64, u64,
+				   u64, u64, u64, u64, u64);
+extern int ia64_sal_oemcall_reentrant(struct ia64_sal_retval *, u64, u64, u64,
+				      u64, u64, u64, u64, u64);
+extern long
+ia64_sal_freq_base (unsigned long which, unsigned long *ticks_per_second,
+		    unsigned long *drift_info);
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * System Abstraction Layer Specification
+ * Section 3.2.5.1: OS_BOOT_RENDEZ to SAL return State.
+ * Note: region regs are stored first in head.S _start. Hence they must
+ * stay up front.
+ */
+struct sal_to_os_boot {
+	u64 rr[8];		/* Region Registers */
+	u64 br[6];		/* br0:
+				 * return addr into SAL boot rendez routine */
+	u64 gr1;		/* SAL:GP */
+	u64 gr12;		/* SAL:SP */
+	u64 gr13;		/* SAL: Task Pointer */
+	u64 fpsr;
+	u64 pfs;
+	u64 rnat;
+	u64 unat;
+	u64 bspstore;
+	u64 dcr;		/* Default Control Register */
+	u64 iva;
+	u64 pta;
+	u64 itv;
+	u64 pmv;
+	u64 cmcv;
+	u64 lrr[2];
+	u64 gr[4];
+	u64 pr;			/* Predicate registers */
+	u64 lc;			/* Loop Count */
+	struct ia64_fpreg fp[20];
+};
+
+/*
+ * Global array allocated for NR_CPUS at boot time
+ */
+extern struct sal_to_os_boot sal_boot_rendez_state[NR_CPUS];
+
+extern void ia64_jump_to_sal(struct sal_to_os_boot *);
+#endif
+
+extern void ia64_sal_handler_init(void *entry_point, void *gpval);
+
+#define PALO_MAX_TLB_PURGES	0xFFFF
+#define PALO_SIG	"PALO"
+
+struct palo_table {
+	u8  signature[4];	/* Should be "PALO" */
+	u32 length;
+	u8  minor_revision;
+	u8  major_revision;
+	u8  checksum;
+	u8  reserved1[5];
+	u16 max_tlb_purges;
+	u8  reserved2[6];
+};
+
+#define NPTCG_FROM_PAL			0
+#define NPTCG_FROM_PALO			1
+#define NPTCG_FROM_KERNEL_PARAMETER	2
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_SAL_H */
diff --git a/arch/ia64/include/asm/scatterlist.h b/arch/ia64/include/asm/scatterlist.h
new file mode 100644
index 000000000000..d6f57874041d
--- /dev/null
+++ b/arch/ia64/include/asm/scatterlist.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_SCATTERLIST_H
+#define _ASM_IA64_SCATTERLIST_H
+
+/*
+ * Modified 1998-1999, 2001-2002, 2004
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long sg_magic;
+#endif
+	unsigned long page_link;
+	unsigned int offset;
+	unsigned int length;	/* buffer length */
+
+	dma_addr_t dma_address;
+	unsigned int dma_length;
+};
+
+/*
+ * It used to be that ISA_DMA_THRESHOLD had something to do with the
+ * DMA-limits of ISA-devices.  Nowadays, its only remaining use (apart
+ * from the aha1542.c driver, which isn't 64-bit clean anyhow) is to
+ * tell the block-layer (via BLK_BOUNCE_ISA) what the max. physical
+ * address of a page is that is allocated with GFP_DMA.  On IA-64,
+ * that's 4GB - 1.
+ */
+#define ISA_DMA_THRESHOLD	0xffffffff
+
+#define sg_dma_len(sg)		((sg)->dma_length)
+#define sg_dma_address(sg)	((sg)->dma_address)
+
+#define	ARCH_HAS_SG_CHAIN
+
+#endif /* _ASM_IA64_SCATTERLIST_H */
diff --git a/arch/ia64/include/asm/sections.h b/arch/ia64/include/asm/sections.h
new file mode 100644
index 000000000000..7286e4a9fe84
--- /dev/null
+++ b/arch/ia64/include/asm/sections.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_IA64_SECTIONS_H
+#define _ASM_IA64_SECTIONS_H
+
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm-generic/sections.h>
+
+extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
+extern char __start___vtop_patchlist[], __end___vtop_patchlist[];
+extern char __start___rse_patchlist[], __end___rse_patchlist[];
+extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[];
+extern char __start___phys_stack_reg_patchlist[], __end___phys_stack_reg_patchlist[];
+extern char __start_gate_section[];
+extern char __start_gate_mckinley_e9_patchlist[], __end_gate_mckinley_e9_patchlist[];
+extern char __start_gate_vtop_patchlist[], __end_gate_vtop_patchlist[];
+extern char __start_gate_fsyscall_patchlist[], __end_gate_fsyscall_patchlist[];
+extern char __start_gate_brl_fsys_bubble_down_patchlist[], __end_gate_brl_fsys_bubble_down_patchlist[];
+extern char __start_unwind[], __end_unwind[];
+extern char __start_ivt_text[], __end_ivt_text[];
+
+#endif /* _ASM_IA64_SECTIONS_H */
+
diff --git a/arch/ia64/include/asm/segment.h b/arch/ia64/include/asm/segment.h
new file mode 100644
index 000000000000..b89e2b3d648f
--- /dev/null
+++ b/arch/ia64/include/asm/segment.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_IA64_SEGMENT_H
+#define _ASM_IA64_SEGMENT_H
+
+/* Only here because we have some old header files that expect it.. */
+
+#endif /* _ASM_IA64_SEGMENT_H */
diff --git a/arch/ia64/include/asm/sembuf.h b/arch/ia64/include/asm/sembuf.h
new file mode 100644
index 000000000000..1340fbc04d3e
--- /dev/null
+++ b/arch/ia64/include/asm/sembuf.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_IA64_SEMBUF_H
+#define _ASM_IA64_SEMBUF_H
+
+/*
+ * The semid64_ds structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _ASM_IA64_SEMBUF_H */
diff --git a/arch/ia64/include/asm/serial.h b/arch/ia64/include/asm/serial.h
new file mode 100644
index 000000000000..068be11583df
--- /dev/null
+++ b/arch/ia64/include/asm/serial.h
@@ -0,0 +1,17 @@
+/*
+ * Derived from the i386 version.
+ */
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/*
+ * All legacy serial ports should be enumerated via ACPI namespace, so
+ * we need not list them here.
+ */
diff --git a/arch/ia64/include/asm/setup.h b/arch/ia64/include/asm/setup.h
new file mode 100644
index 000000000000..4399a44355b3
--- /dev/null
+++ b/arch/ia64/include/asm/setup.h
@@ -0,0 +1,6 @@
+#ifndef __IA64_SETUP_H
+#define __IA64_SETUP_H
+
+#define COMMAND_LINE_SIZE	2048
+
+#endif
diff --git a/arch/ia64/include/asm/shmbuf.h b/arch/ia64/include/asm/shmbuf.h
new file mode 100644
index 000000000000..585002a77acd
--- /dev/null
+++ b/arch/ia64/include/asm/shmbuf.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_IA64_SHMBUF_H
+#define _ASM_IA64_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for IA-64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	__kernel_time_t		shm_ctime;	/* last change time */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _ASM_IA64_SHMBUF_H */
diff --git a/arch/ia64/include/asm/shmparam.h b/arch/ia64/include/asm/shmparam.h
new file mode 100644
index 000000000000..d07508dc54ae
--- /dev/null
+++ b/arch/ia64/include/asm/shmparam.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_IA64_SHMPARAM_H
+#define _ASM_IA64_SHMPARAM_H
+
+/*
+ * SHMLBA controls minimum alignment at which shared memory segments
+ * get attached.  The IA-64 architecture says that there may be a
+ * performance degradation when there are virtual aliases within 1MB.
+ * To reduce the chance of this, we set SHMLBA to 1MB. --davidm 00/12/20
+ */
+#define	SHMLBA	(1024*1024)
+
+#endif /* _ASM_IA64_SHMPARAM_H */
diff --git a/arch/ia64/include/asm/sigcontext.h b/arch/ia64/include/asm/sigcontext.h
new file mode 100644
index 000000000000..57ff777bcc40
--- /dev/null
+++ b/arch/ia64/include/asm/sigcontext.h
@@ -0,0 +1,70 @@
+#ifndef _ASM_IA64_SIGCONTEXT_H
+#define _ASM_IA64_SIGCONTEXT_H
+
+/*
+ * Copyright (C) 1998, 1999, 2001 Hewlett-Packard Co
+ * Copyright (C) 1998, 1999, 2001 David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/fpu.h>
+
+#define IA64_SC_FLAG_ONSTACK_BIT		0	/* is handler running on signal stack? */
+#define IA64_SC_FLAG_IN_SYSCALL_BIT		1	/* did signal interrupt a syscall? */
+#define IA64_SC_FLAG_FPH_VALID_BIT		2	/* is state in f[32]-f[127] valid? */
+
+#define IA64_SC_FLAG_ONSTACK		(1 << IA64_SC_FLAG_ONSTACK_BIT)
+#define IA64_SC_FLAG_IN_SYSCALL		(1 << IA64_SC_FLAG_IN_SYSCALL_BIT)
+#define IA64_SC_FLAG_FPH_VALID		(1 << IA64_SC_FLAG_FPH_VALID_BIT)
+
+# ifndef __ASSEMBLY__
+
+/*
+ * Note on handling of register backing store: sc_ar_bsp contains the address that would
+ * be found in ar.bsp after executing a "cover" instruction the context in which the
+ * signal was raised.  If signal delivery required switching to an alternate signal stack
+ * (sc_rbs_base is not NULL), the "dirty" partition (as it would exist after executing the
+ * imaginary "cover" instruction) is backed by the *alternate* signal stack, not the
+ * original one.  In this case, sc_rbs_base contains the base address of the new register
+ * backing store.  The number of registers in the dirty partition can be calculated as:
+ *
+ *   ndirty = ia64_rse_num_regs(sc_rbs_base, sc_rbs_base + (sc_loadrs >> 16))
+ *
+ */
+
+struct sigcontext {
+	unsigned long		sc_flags;	/* see manifest constants above */
+	unsigned long		sc_nat;		/* bit i == 1 iff scratch reg gr[i] is a NaT */
+	stack_t			sc_stack;	/* previously active stack */
+
+	unsigned long		sc_ip;		/* instruction pointer */
+	unsigned long		sc_cfm;		/* current frame marker */
+	unsigned long		sc_um;		/* user mask bits */
+	unsigned long		sc_ar_rsc;	/* register stack configuration register */
+	unsigned long		sc_ar_bsp;	/* backing store pointer */
+	unsigned long		sc_ar_rnat;	/* RSE NaT collection register */
+	unsigned long		sc_ar_ccv;	/* compare and exchange compare value register */
+	unsigned long		sc_ar_unat;	/* ar.unat of interrupted context */
+	unsigned long		sc_ar_fpsr;	/* floating-point status register */
+	unsigned long		sc_ar_pfs;	/* previous function state */
+	unsigned long		sc_ar_lc;	/* loop count register */
+	unsigned long		sc_pr;		/* predicate registers */
+	unsigned long		sc_br[8];	/* branch registers */
+	/* Note: sc_gr[0] is used as the "uc_link" member of ucontext_t */
+	unsigned long		sc_gr[32];	/* general registers (static partition) */
+	struct ia64_fpreg	sc_fr[128];	/* floating-point registers */
+
+	unsigned long		sc_rbs_base;	/* NULL or new base of sighandler's rbs */
+	unsigned long		sc_loadrs;	/* see description above */
+
+	unsigned long		sc_ar25;	/* cmp8xchg16 uses this */
+	unsigned long		sc_ar26;	/* rsvd for scratch use */
+	unsigned long		sc_rsvd[12];	/* reserved for future use */
+	/*
+	 * The mask must come last so we can increase _NSIG_WORDS
+	 * without breaking binary compatibility.
+	 */
+	sigset_t		sc_mask;	/* signal mask to restore after handler returns */
+};
+
+# endif /* __ASSEMBLY__ */
+#endif /* _ASM_IA64_SIGCONTEXT_H */
diff --git a/arch/ia64/include/asm/siginfo.h b/arch/ia64/include/asm/siginfo.h
new file mode 100644
index 000000000000..9294e4b0c8bc
--- /dev/null
+++ b/arch/ia64/include/asm/siginfo.h
@@ -0,0 +1,139 @@
+#ifndef _ASM_IA64_SIGINFO_H
+#define _ASM_IA64_SIGINFO_H
+
+/*
+ * Based on <asm-i386/siginfo.h>.
+ *
+ * Modified 1998-2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+
+#define HAVE_ARCH_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO
+#define HAVE_ARCH_COPY_SIGINFO_TO_USER
+
+#include <asm-generic/siginfo.h>
+
+typedef struct siginfo {
+	int si_signo;
+	int si_errno;
+	int si_code;
+	int __pad0;
+
+	union {
+		int _pad[SI_PAD_SIZE];
+
+		/* kill() */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			uid_t _uid;		/* sender's uid */
+		} _kill;
+
+		/* POSIX.1b timers */
+		struct {
+			timer_t _tid;		/* timer id */
+			int _overrun;		/* overrun count */
+			char _pad[sizeof(__ARCH_SI_UID_T) - sizeof(int)];
+			sigval_t _sigval;	/* must overlay ._rt._sigval! */
+			int _sys_private;	/* not to be passed to user */
+		} _timer;
+
+		/* POSIX.1b signals */
+		struct {
+			pid_t _pid;		/* sender's pid */
+			uid_t _uid;		/* sender's uid */
+			sigval_t _sigval;
+		} _rt;
+
+		/* SIGCHLD */
+		struct {
+			pid_t _pid;		/* which child */
+			uid_t _uid;		/* sender's uid */
+			int _status;		/* exit code */
+			clock_t _utime;
+			clock_t _stime;
+		} _sigchld;
+
+		/* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+		struct {
+			void __user *_addr;	/* faulting insn/memory ref. */
+			int _imm;		/* immediate value for "break" */
+			unsigned int _flags;	/* see below */
+			unsigned long _isr;	/* isr */
+		} _sigfault;
+
+		/* SIGPOLL */
+		struct {
+			long _band;	/* POLL_IN, POLL_OUT, POLL_MSG (XPG requires a "long") */
+			int _fd;
+		} _sigpoll;
+	} _sifields;
+} siginfo_t;
+
+#define si_imm		_sifields._sigfault._imm	/* as per UNIX SysV ABI spec */
+#define si_flags	_sifields._sigfault._flags
+/*
+ * si_isr is valid for SIGILL, SIGFPE, SIGSEGV, SIGBUS, and SIGTRAP provided that
+ * si_code is non-zero and __ISR_VALID is set in si_flags.
+ */
+#define si_isr		_sifields._sigfault._isr
+
+/*
+ * Flag values for si_flags:
+ */
+#define __ISR_VALID_BIT	0
+#define __ISR_VALID	(1 << __ISR_VALID_BIT)
+
+/*
+ * SIGILL si_codes
+ */
+#define ILL_BADIADDR	(__SI_FAULT|9)	/* unimplemented instruction address */
+#define __ILL_BREAK	(__SI_FAULT|10)	/* illegal break */
+#define __ILL_BNDMOD	(__SI_FAULT|11)	/* bundle-update (modification) in progress */
+#undef NSIGILL
+#define NSIGILL		11
+
+/*
+ * SIGFPE si_codes
+ */
+#define __FPE_DECOVF	(__SI_FAULT|9)	/* decimal overflow */
+#define __FPE_DECDIV	(__SI_FAULT|10)	/* decimal division by zero */
+#define __FPE_DECERR	(__SI_FAULT|11)	/* packed decimal error */
+#define __FPE_INVASC	(__SI_FAULT|12)	/* invalid ASCII digit */
+#define __FPE_INVDEC	(__SI_FAULT|13)	/* invalid decimal digit */
+#undef NSIGFPE
+#define NSIGFPE		13
+
+/*
+ * SIGSEGV si_codes
+ */
+#define __SEGV_PSTKOVF	(__SI_FAULT|3)	/* paragraph stack overflow */
+#undef NSIGSEGV
+#define NSIGSEGV	3
+
+/*
+ * SIGTRAP si_codes
+ */
+#define TRAP_BRANCH	(__SI_FAULT|3)	/* process taken branch trap */
+#define TRAP_HWBKPT	(__SI_FAULT|4)	/* hardware breakpoint or watchpoint */
+#undef NSIGTRAP
+#define NSIGTRAP	4
+
+#ifdef __KERNEL__
+#include <linux/string.h>
+
+static inline void
+copy_siginfo (siginfo_t *to, siginfo_t *from)
+{
+	if (from->si_code < 0)
+		memcpy(to, from, sizeof(siginfo_t));
+	else
+		/* _sigchld is currently the largest know union member */
+		memcpy(to, from, 4*sizeof(int) + sizeof(from->_sifields._sigchld));
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_SIGINFO_H */
diff --git a/arch/ia64/include/asm/signal.h b/arch/ia64/include/asm/signal.h
new file mode 100644
index 000000000000..4f5ca5643cb1
--- /dev/null
+++ b/arch/ia64/include/asm/signal.h
@@ -0,0 +1,160 @@
+#ifndef _ASM_IA64_SIGNAL_H
+#define _ASM_IA64_SIGNAL_H
+
+/*
+ * Modified 1998-2001, 2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ *
+ * Unfortunately, this file is being included by bits/signal.h in
+ * glibc-2.x.  Hence the #ifdef __KERNEL__ ugliness.
+ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+/* signal 31 is no longer "unused", but the SIGUNUSED macro remains for backwards compatibility */
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+/*
+ * The minimum stack size needs to be fairly large because we want to
+ * be sure that an app compiled for today's CPUs will continue to run
+ * on all future CPU models.  The CPU model matters because the signal
+ * frame needs to have space for the complete machine state, including
+ * all physical stacked registers.  The number of physical stacked
+ * registers is CPU model dependent, but given that the width of
+ * ar.rsc.loadrs is 14 bits, we can assume that they'll never take up
+ * more than 16KB of space.
+ */
+#if 1
+  /*
+   * This is a stupid typo: the value was _meant_ to be 131072 (0x20000), but I typed it
+   * in wrong. ;-(  To preserve backwards compatibility, we leave the kernel at the
+   * incorrect value and fix libc only.
+   */
+# define MINSIGSTKSZ	131027	/* min. stack size for sigaltstack() */
+#else
+# define MINSIGSTKSZ	131072	/* min. stack size for sigaltstack() */
+#endif
+#define SIGSTKSZ	262144	/* default stack size for sigaltstack() */
+
+#ifdef __KERNEL__
+
+#define _NSIG		64
+#define _NSIG_BPW	64
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/signal.h>
+
+# ifndef __ASSEMBLY__
+
+#  include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+typedef unsigned long old_sigset_t;
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+#  include <asm/sigcontext.h>
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+# endif /* !__ASSEMBLY__ */
+#endif /* _ASM_IA64_SIGNAL_H */
diff --git a/arch/ia64/include/asm/smp.h b/arch/ia64/include/asm/smp.h
new file mode 100644
index 000000000000..12d96e0cd513
--- /dev/null
+++ b/arch/ia64/include/asm/smp.h
@@ -0,0 +1,138 @@
+/*
+ * SMP Support
+ *
+ * Copyright (C) 1999 VA Linux Systems
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ * (c) Copyright 2001-2003, 2005 Hewlett-Packard Development Company, L.P.
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *	Bjorn Helgaas <bjorn.helgaas@hp.com>
+ */
+#ifndef _ASM_IA64_SMP_H
+#define _ASM_IA64_SMP_H
+
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <linux/kernel.h>
+#include <linux/cpumask.h>
+#include <linux/bitops.h>
+#include <linux/irqreturn.h>
+
+#include <asm/io.h>
+#include <asm/param.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+
+static inline unsigned int
+ia64_get_lid (void)
+{
+	union {
+		struct {
+			unsigned long reserved : 16;
+			unsigned long eid : 8;
+			unsigned long id : 8;
+			unsigned long ignored : 32;
+		} f;
+		unsigned long bits;
+	} lid;
+
+	lid.bits = ia64_getreg(_IA64_REG_CR_LID);
+	return lid.f.id << 8 | lid.f.eid;
+}
+
+#define hard_smp_processor_id()		ia64_get_lid()
+
+#ifdef CONFIG_SMP
+
+#define XTP_OFFSET		0x1e0008
+
+#define SMP_IRQ_REDIRECTION	(1 << 0)
+#define SMP_IPI_REDIRECTION	(1 << 1)
+
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+
+extern struct smp_boot_data {
+	int cpu_count;
+	int cpu_phys_id[NR_CPUS];
+} smp_boot_data __initdata;
+
+extern char no_int_routing __devinitdata;
+
+extern cpumask_t cpu_online_map;
+extern cpumask_t cpu_core_map[NR_CPUS];
+DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+extern int smp_num_siblings;
+extern void __iomem *ipi_base_addr;
+extern unsigned char smp_int_redirect;
+
+extern volatile int ia64_cpu_to_sapicid[];
+#define cpu_physical_id(i)	ia64_cpu_to_sapicid[i]
+
+extern unsigned long ap_wakeup_vector;
+
+/*
+ * Function to map hard smp processor id to logical id.  Slow, so don't use this in
+ * performance-critical code.
+ */
+static inline int
+cpu_logical_id (int cpuid)
+{
+	int i;
+
+	for (i = 0; i < NR_CPUS; ++i)
+		if (cpu_physical_id(i) == cpuid)
+			break;
+	return i;
+}
+
+/*
+ * XTP control functions:
+ *	min_xtp   : route all interrupts to this CPU
+ *	normal_xtp: nominal XTP value
+ *	max_xtp   : never deliver interrupts to this CPU.
+ */
+
+static inline void
+min_xtp (void)
+{
+	if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+		writeb(0x00, ipi_base_addr + XTP_OFFSET); /* XTP to min */
+}
+
+static inline void
+normal_xtp (void)
+{
+	if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+		writeb(0x08, ipi_base_addr + XTP_OFFSET); /* XTP normal */
+}
+
+static inline void
+max_xtp (void)
+{
+	if (smp_int_redirect & SMP_IRQ_REDIRECTION)
+		writeb(0x0f, ipi_base_addr + XTP_OFFSET); /* Set XTP to max */
+}
+
+/* Upping and downing of CPUs */
+extern int __cpu_disable (void);
+extern void __cpu_die (unsigned int cpu);
+extern void cpu_die (void) __attribute__ ((noreturn));
+extern void __init smp_build_cpu_map(void);
+
+extern void __init init_smp_config (void);
+extern void smp_do_timer (struct pt_regs *regs);
+
+extern irqreturn_t handle_IPI(int irq, void *dev_id);
+extern void smp_send_reschedule (int cpu);
+extern void identify_siblings (struct cpuinfo_ia64 *);
+extern int is_multithreading_enabled(void);
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+#else /* CONFIG_SMP */
+
+#define cpu_logical_id(i)		0
+#define cpu_physical_id(i)		ia64_get_lid()
+
+#endif /* CONFIG_SMP */
+#endif /* _ASM_IA64_SMP_H */
diff --git a/arch/ia64/include/asm/sn/acpi.h b/arch/ia64/include/asm/sn/acpi.h
new file mode 100644
index 000000000000..9ce2801cbd57
--- /dev/null
+++ b/arch/ia64/include/asm/sn/acpi.h
@@ -0,0 +1,17 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_ACPI_H
+#define _ASM_IA64_SN_ACPI_H
+
+#include "acpi/acglobal.h"
+
+extern int sn_acpi_rev;
+#define SN_ACPI_BASE_SUPPORT()   (sn_acpi_rev >= 0x20101)
+
+#endif /* _ASM_IA64_SN_ACPI_H */
diff --git a/arch/ia64/include/asm/sn/addrs.h b/arch/ia64/include/asm/sn/addrs.h
new file mode 100644
index 000000000000..e715c794b186
--- /dev/null
+++ b/arch/ia64/include/asm/sn/addrs.h
@@ -0,0 +1,299 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1992-1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_ADDRS_H
+#define _ASM_IA64_SN_ADDRS_H
+
+#include <asm/percpu.h>
+#include <asm/sn/types.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/pda.h>
+
+/*
+ *  Memory/SHUB Address Format:
+ *  +-+---------+--+--------------+
+ *  |0|  NASID  |AS| NodeOffset   |
+ *  +-+---------+--+--------------+
+ *
+ *  NASID: (low NASID bit is 0) Memory and SHUB MMRs
+ *   AS: 2-bit Address Space Identifier. Used only if low NASID bit is 0
+ *     00: Local Resources and MMR space
+ *           Top bit of NodeOffset
+ *               0: Local resources space
+ *                  node id:
+ *                        0: IA64/NT compatibility space
+ *                        2: Local MMR Space
+ *                        4: Local memory, regardless of local node id
+ *               1: Global MMR space
+ *     01: GET space.
+ *     10: AMO space.
+ *     11: Cacheable memory space.
+ *
+ *   NodeOffset: byte offset
+ *
+ *
+ *  TIO address format:
+ *  +-+----------+--+--------------+
+ *  |0|  NASID   |AS| Nodeoffset   |
+ *  +-+----------+--+--------------+
+ *
+ *  NASID: (low NASID bit is 1) TIO
+ *   AS: 2-bit Chiplet Identifier
+ *     00: TIO LB (Indicates TIO MMR access.)
+ *     01: TIO ICE (indicates coretalk space access.)
+ * 
+ *   NodeOffset: top bit must be set.
+ *
+ *
+ * Note that in both of the above address formats, the low
+ * NASID bit indicates if the reference is to the SHUB or TIO MMRs.
+ */
+
+
+/*
+ * Define basic shift & mask constants for manipulating NASIDs and AS values.
+ */
+#define NASID_BITMASK		(sn_hub_info->nasid_bitmask)
+#define NASID_SHIFT		(sn_hub_info->nasid_shift)
+#define AS_SHIFT		(sn_hub_info->as_shift)
+#define AS_BITMASK		0x3UL
+
+#define NASID_MASK              ((u64)NASID_BITMASK << NASID_SHIFT)
+#define AS_MASK			((u64)AS_BITMASK << AS_SHIFT)
+
+
+/*
+ * AS values. These are the same on both SHUB1 & SHUB2.
+ */
+#define AS_GET_VAL		1UL
+#define AS_AMO_VAL		2UL
+#define AS_CAC_VAL		3UL
+#define AS_GET_SPACE		(AS_GET_VAL << AS_SHIFT)
+#define AS_AMO_SPACE		(AS_AMO_VAL << AS_SHIFT)
+#define AS_CAC_SPACE		(AS_CAC_VAL << AS_SHIFT)
+
+
+/* 
+ * Virtual Mode Local & Global MMR space.  
+ */
+#define SH1_LOCAL_MMR_OFFSET	0x8000000000UL
+#define SH2_LOCAL_MMR_OFFSET	0x0200000000UL
+#define LOCAL_MMR_OFFSET	(is_shub2() ? SH2_LOCAL_MMR_OFFSET : SH1_LOCAL_MMR_OFFSET)
+#define LOCAL_MMR_SPACE		(__IA64_UNCACHED_OFFSET | LOCAL_MMR_OFFSET)
+#define LOCAL_PHYS_MMR_SPACE	(RGN_BASE(RGN_HPAGE) | LOCAL_MMR_OFFSET)
+
+#define SH1_GLOBAL_MMR_OFFSET	0x0800000000UL
+#define SH2_GLOBAL_MMR_OFFSET	0x0300000000UL
+#define GLOBAL_MMR_OFFSET	(is_shub2() ? SH2_GLOBAL_MMR_OFFSET : SH1_GLOBAL_MMR_OFFSET)
+#define GLOBAL_MMR_SPACE	(__IA64_UNCACHED_OFFSET | GLOBAL_MMR_OFFSET)
+
+/*
+ * Physical mode addresses
+ */
+#define GLOBAL_PHYS_MMR_SPACE	(RGN_BASE(RGN_HPAGE) | GLOBAL_MMR_OFFSET)
+
+
+/*
+ * Clear region & AS bits.
+ */
+#define TO_PHYS_MASK		(~(RGN_BITS | AS_MASK))
+
+
+/*
+ * Misc NASID manipulation.
+ */
+#define NASID_SPACE(n)		((u64)(n) << NASID_SHIFT)
+#define REMOTE_ADDR(n,a)	(NASID_SPACE(n) | (a))
+#define NODE_OFFSET(x)		((x) & (NODE_ADDRSPACE_SIZE - 1))
+#define NODE_ADDRSPACE_SIZE     (1UL << AS_SHIFT)
+#define NASID_GET(x)		(int) (((u64) (x) >> NASID_SHIFT) & NASID_BITMASK)
+#define LOCAL_MMR_ADDR(a)	(LOCAL_MMR_SPACE | (a))
+#define GLOBAL_MMR_ADDR(n,a)	(GLOBAL_MMR_SPACE | REMOTE_ADDR(n,a))
+#define GLOBAL_MMR_PHYS_ADDR(n,a) (GLOBAL_PHYS_MMR_SPACE | REMOTE_ADDR(n,a))
+#define GLOBAL_CAC_ADDR(n,a)	(CAC_BASE | REMOTE_ADDR(n,a))
+#define CHANGE_NASID(n,x)	((void *)(((u64)(x) & ~NASID_MASK) | NASID_SPACE(n)))
+#define IS_TIO_NASID(n)		((n) & 1)
+
+
+/* non-II mmr's start at top of big window space (4G) */
+#define BWIN_TOP		0x0000000100000000UL
+
+/*
+ * general address defines
+ */
+#define CAC_BASE		(PAGE_OFFSET | AS_CAC_SPACE)
+#define AMO_BASE		(__IA64_UNCACHED_OFFSET | AS_AMO_SPACE)
+#define AMO_PHYS_BASE		(RGN_BASE(RGN_HPAGE) | AS_AMO_SPACE)
+#define GET_BASE		(PAGE_OFFSET | AS_GET_SPACE)
+
+/*
+ * Convert Memory addresses between various addressing modes.
+ */
+#define TO_PHYS(x)		(TO_PHYS_MASK & (x))
+#define TO_CAC(x)		(CAC_BASE     | TO_PHYS(x))
+#ifdef CONFIG_SGI_SN
+#define TO_AMO(x)		(AMO_BASE     | TO_PHYS(x))
+#define TO_GET(x)		(GET_BASE     | TO_PHYS(x))
+#else
+#define TO_AMO(x)		({ BUG(); x; })
+#define TO_GET(x)		({ BUG(); x; })
+#endif
+
+/*
+ * Covert from processor physical address to II/TIO physical address:
+ *	II - squeeze out the AS bits
+ *	TIO- requires a chiplet id in bits 38-39.  For DMA to memory,
+ *           the chiplet id is zero.  If we implement TIO-TIO dma, we might need
+ *           to insert a chiplet id into this macro.  However, it is our belief
+ *           right now that this chiplet id will be ICE, which is also zero.
+ */
+#define SH1_TIO_PHYS_TO_DMA(x) 						\
+	((((u64)(NASID_GET(x))) << 40) | NODE_OFFSET(x))
+
+#define SH2_NETWORK_BANK_OFFSET(x) 					\
+        ((u64)(x) & ((1UL << (sn_hub_info->nasid_shift - 4)) -1))
+
+#define SH2_NETWORK_BANK_SELECT(x) 					\
+        ((((u64)(x) & (0x3UL << (sn_hub_info->nasid_shift - 4)))	\
+        	>> (sn_hub_info->nasid_shift - 4)) << 36)
+
+#define SH2_NETWORK_ADDRESS(x) 						\
+	(SH2_NETWORK_BANK_OFFSET(x) | SH2_NETWORK_BANK_SELECT(x))
+
+#define SH2_TIO_PHYS_TO_DMA(x) 						\
+        (((u64)(NASID_GET(x)) << 40) | 	SH2_NETWORK_ADDRESS(x))
+
+#define PHYS_TO_TIODMA(x)						\
+	(is_shub1() ? SH1_TIO_PHYS_TO_DMA(x) : SH2_TIO_PHYS_TO_DMA(x))
+
+#define PHYS_TO_DMA(x)							\
+	((((u64)(x) & NASID_MASK) >> 2) | NODE_OFFSET(x))
+
+
+/*
+ * Macros to test for address type.
+ */
+#define IS_AMO_ADDRESS(x)	(((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_BASE)
+#define IS_AMO_PHYS_ADDRESS(x)	(((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_PHYS_BASE)
+
+
+/*
+ * The following definitions pertain to the IO special address
+ * space.  They define the location of the big and little windows
+ * of any given node.
+ */
+#define BWIN_SIZE_BITS			29	/* big window size: 512M */
+#define TIO_BWIN_SIZE_BITS		30	/* big window size: 1G */
+#define NODE_SWIN_BASE(n, w)		((w == 0) ? NODE_BWIN_BASE((n), SWIN0_BIGWIN) \
+		: RAW_NODE_SWIN_BASE(n, w))
+#define TIO_SWIN_BASE(n, w) 		(TIO_IO_BASE(n) + \
+					    ((u64) (w) << TIO_SWIN_SIZE_BITS))
+#define NODE_IO_BASE(n)			(GLOBAL_MMR_SPACE | NASID_SPACE(n))
+#define TIO_IO_BASE(n)                  (__IA64_UNCACHED_OFFSET | NASID_SPACE(n))
+#define BWIN_SIZE			(1UL << BWIN_SIZE_BITS)
+#define NODE_BWIN_BASE0(n)		(NODE_IO_BASE(n) + BWIN_SIZE)
+#define NODE_BWIN_BASE(n, w)		(NODE_BWIN_BASE0(n) + ((u64) (w) << BWIN_SIZE_BITS))
+#define RAW_NODE_SWIN_BASE(n, w)	(NODE_IO_BASE(n) + ((u64) (w) << SWIN_SIZE_BITS))
+#define BWIN_WIDGET_MASK		0x7
+#define BWIN_WINDOWNUM(x)		(((x) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
+#define SH1_IS_BIG_WINDOW_ADDR(x)	((x) & BWIN_TOP)
+
+#define TIO_BWIN_WINDOW_SELECT_MASK	0x7
+#define TIO_BWIN_WINDOWNUM(x)		(((x) >> TIO_BWIN_SIZE_BITS) & TIO_BWIN_WINDOW_SELECT_MASK)
+
+#define TIO_HWIN_SHIFT_BITS		33
+#define TIO_HWIN(x)			(NODE_OFFSET(x) >> TIO_HWIN_SHIFT_BITS)
+
+/*
+ * The following definitions pertain to the IO special address
+ * space.  They define the location of the big and little windows
+ * of any given node.
+ */
+
+#define SWIN_SIZE_BITS			24
+#define	SWIN_WIDGET_MASK		0xF
+
+#define TIO_SWIN_SIZE_BITS		28
+#define TIO_SWIN_SIZE			(1UL << TIO_SWIN_SIZE_BITS)
+#define TIO_SWIN_WIDGET_MASK		0x3
+
+/*
+ * Convert smallwindow address to xtalk address.
+ *
+ * 'addr' can be physical or virtual address, but will be converted
+ * to Xtalk address in the range 0 -> SWINZ_SIZEMASK
+ */
+#define	SWIN_WIDGETNUM(x)		(((x)  >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
+#define TIO_SWIN_WIDGETNUM(x)		(((x)  >> TIO_SWIN_SIZE_BITS) & TIO_SWIN_WIDGET_MASK)
+
+
+/*
+ * The following macros produce the correct base virtual address for
+ * the hub registers. The REMOTE_HUB_* macro produce
+ * the address for the specified hub's registers.  The intent is
+ * that the appropriate PI, MD, NI, or II register would be substituted
+ * for x.
+ *
+ *   WARNING:
+ *	When certain Hub chip workaround are defined, it's not sufficient
+ *	to dereference the *_HUB_ADDR() macros.  You should instead use
+ *	HUB_L() and HUB_S() if you must deal with pointers to hub registers.
+ *	Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S().
+ *	They're always safe.
+ */
+/* Shub1 TIO & MMR addressing macros */
+#define SH1_TIO_IOSPACE_ADDR(n,x)					\
+	GLOBAL_MMR_ADDR(n,x)
+
+#define SH1_REMOTE_BWIN_MMR(n,x)					\
+	GLOBAL_MMR_ADDR(n,x)
+
+#define SH1_REMOTE_SWIN_MMR(n,x)					\
+	(NODE_SWIN_BASE(n,1) + 0x800000UL + (x))
+
+#define SH1_REMOTE_MMR(n,x)						\
+	(SH1_IS_BIG_WINDOW_ADDR(x) ? SH1_REMOTE_BWIN_MMR(n,x) :		\
+	 	SH1_REMOTE_SWIN_MMR(n,x))
+
+/* Shub1 TIO & MMR addressing macros */
+#define SH2_TIO_IOSPACE_ADDR(n,x)					\
+	((__IA64_UNCACHED_OFFSET | REMOTE_ADDR(n,x) | 1UL << (NASID_SHIFT - 2)))
+
+#define SH2_REMOTE_MMR(n,x)						\
+	GLOBAL_MMR_ADDR(n,x)
+
+
+/* TIO & MMR addressing macros that work on both shub1 & shub2 */
+#define TIO_IOSPACE_ADDR(n,x)						\
+	((u64 *)(is_shub1() ? SH1_TIO_IOSPACE_ADDR(n,x) :		\
+		 SH2_TIO_IOSPACE_ADDR(n,x)))
+
+#define SH_REMOTE_MMR(n,x)						\
+	(is_shub1() ? SH1_REMOTE_MMR(n,x) : SH2_REMOTE_MMR(n,x))
+
+#define REMOTE_HUB_ADDR(n,x)						\
+	(IS_TIO_NASID(n) ?  ((volatile u64*)TIO_IOSPACE_ADDR(n,x)) :	\
+	 ((volatile u64*)SH_REMOTE_MMR(n,x)))
+
+
+#define HUB_L(x)			(*((volatile typeof(*x) *)x))
+#define	HUB_S(x,d)			(*((volatile typeof(*x) *)x) = (d))
+
+#define REMOTE_HUB_L(n, a)		HUB_L(REMOTE_HUB_ADDR((n), (a)))
+#define REMOTE_HUB_S(n, a, d)		HUB_S(REMOTE_HUB_ADDR((n), (a)), (d))
+
+/*
+ * Coretalk address breakdown
+ */
+#define CTALK_NASID_SHFT		40
+#define CTALK_NASID_MASK		(0x3FFFULL << CTALK_NASID_SHFT)
+#define CTALK_CID_SHFT			38
+#define CTALK_CID_MASK			(0x3ULL << CTALK_CID_SHFT)
+#define CTALK_NODE_OFFSET		0x3FFFFFFFFF
+
+#endif /* _ASM_IA64_SN_ADDRS_H */
diff --git a/arch/ia64/include/asm/sn/arch.h b/arch/ia64/include/asm/sn/arch.h
new file mode 100644
index 000000000000..7caa1f44cd95
--- /dev/null
+++ b/arch/ia64/include/asm/sn/arch.h
@@ -0,0 +1,86 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI specific setup.
+ *
+ * Copyright (C) 1995-1997,1999,2001-2005 Silicon Graphics, Inc.  All rights reserved.
+ * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
+ */
+#ifndef _ASM_IA64_SN_ARCH_H
+#define _ASM_IA64_SN_ARCH_H
+
+#include <linux/numa.h>
+#include <asm/types.h>
+#include <asm/percpu.h>
+#include <asm/sn/types.h>
+#include <asm/sn/sn_cpuid.h>
+
+/*
+ * This is the maximum number of NUMALINK nodes that can be part of a single
+ * SSI kernel. This number includes C-brick, M-bricks, and TIOs. Nodes in
+ * remote partitions are NOT included in this number.
+ * The number of compact nodes cannot exceed size of a coherency domain.
+ * The purpose of this define is to specify a node count that includes
+ * all C/M/TIO nodes in an SSI system.
+ *
+ * SGI system can currently support up to 256 C/M nodes plus additional TIO nodes.
+ *
+ * 	Note: ACPI20 has an architectural limit of 256 nodes. When we upgrade
+ * 	to ACPI3.0, this limit will be removed. The notion of "compact nodes"
+ * 	should be deleted and TIOs should be included in MAX_NUMNODES.
+ */
+#define MAX_TIO_NODES		MAX_NUMNODES
+#define MAX_COMPACT_NODES	(MAX_NUMNODES + MAX_TIO_NODES)
+
+/*
+ * Maximum number of nodes in all partitions and in all coherency domains.
+ * This is the total number of nodes accessible in the numalink fabric. It
+ * includes all C & M bricks, plus all TIOs.
+ *
+ * This value is also the value of the maximum number of NASIDs in the numalink
+ * fabric.
+ */
+#define MAX_NUMALINK_NODES	16384
+
+/*
+ * The following defines attributes of the HUB chip. These attributes are
+ * frequently referenced. They are kept in the per-cpu data areas of each cpu.
+ * They are kept together in a struct to minimize cache misses.
+ */
+struct sn_hub_info_s {
+	u8 shub2;
+	u8 nasid_shift;
+	u8 as_shift;
+	u8 shub_1_1_found;
+	u16 nasid_bitmask;
+};
+DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
+#define sn_hub_info 	(&__get_cpu_var(__sn_hub_info))
+#define is_shub2()	(sn_hub_info->shub2)
+#define is_shub1()	(sn_hub_info->shub2 == 0)
+
+/*
+ * Use this macro to test if shub 1.1 wars should be enabled
+ */
+#define enable_shub_wars_1_1()	(sn_hub_info->shub_1_1_found)
+
+
+/*
+ * Compact node ID to nasid mappings kept in the per-cpu data areas of each
+ * cpu.
+ */
+DECLARE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
+#define sn_cnodeid_to_nasid	(&__get_cpu_var(__sn_cnodeid_to_nasid[0]))
+
+
+extern u8 sn_partition_id;
+extern u8 sn_system_size;
+extern u8 sn_sharing_domain_size;
+extern u8 sn_region_size;
+
+extern void sn_flush_all_caches(long addr, long bytes);
+extern bool sn_cpu_disable_allowed(int cpu);
+
+#endif /* _ASM_IA64_SN_ARCH_H */
diff --git a/arch/ia64/include/asm/sn/bte.h b/arch/ia64/include/asm/sn/bte.h
new file mode 100644
index 000000000000..a0d214f43115
--- /dev/null
+++ b/arch/ia64/include/asm/sn/bte.h
@@ -0,0 +1,233 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000-2007 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+
+#ifndef _ASM_IA64_SN_BTE_H
+#define _ASM_IA64_SN_BTE_H
+
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+#include <asm/sn/pda.h>
+#include <asm/sn/types.h>
+#include <asm/sn/shub_mmr.h>
+
+#define IBCT_NOTIFY             (0x1UL << 4)
+#define IBCT_ZFIL_MODE          (0x1UL << 0)
+
+/* #define BTE_DEBUG */
+/* #define BTE_DEBUG_VERBOSE */
+
+#ifdef BTE_DEBUG
+#  define BTE_PRINTK(x) printk x	/* Terse */
+#  ifdef BTE_DEBUG_VERBOSE
+#    define BTE_PRINTKV(x) printk x	/* Verbose */
+#  else
+#    define BTE_PRINTKV(x)
+#  endif /* BTE_DEBUG_VERBOSE */
+#else
+#  define BTE_PRINTK(x)
+#  define BTE_PRINTKV(x)
+#endif	/* BTE_DEBUG */
+
+
+/* BTE status register only supports 16 bits for length field */
+#define BTE_LEN_BITS (16)
+#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
+#define BTE_MAX_XFER ((1 << BTE_LEN_BITS) * L1_CACHE_BYTES)
+
+
+/* Define hardware */
+#define BTES_PER_NODE (is_shub2() ? 4 : 2)
+#define MAX_BTES_PER_NODE 4
+
+#define BTE2OFF_CTRL	0
+#define BTE2OFF_SRC	(SH2_BT_ENG_SRC_ADDR_0 - SH2_BT_ENG_CSR_0)
+#define BTE2OFF_DEST	(SH2_BT_ENG_DEST_ADDR_0 - SH2_BT_ENG_CSR_0)
+#define BTE2OFF_NOTIFY	(SH2_BT_ENG_NOTIF_ADDR_0 - SH2_BT_ENG_CSR_0)
+
+#define BTE_BASE_ADDR(interface) 				\
+    (is_shub2() ? (interface == 0) ? SH2_BT_ENG_CSR_0 :		\
+		  (interface == 1) ? SH2_BT_ENG_CSR_1 :		\
+		  (interface == 2) ? SH2_BT_ENG_CSR_2 :		\
+		  		     SH2_BT_ENG_CSR_3 		\
+		: (interface == 0) ? IIO_IBLS0 : IIO_IBLS1)
+
+#define BTE_SOURCE_ADDR(base)					\
+    (is_shub2() ? base + (BTE2OFF_SRC/8) 			\
+		: base + (BTEOFF_SRC/8))
+
+#define BTE_DEST_ADDR(base)					\
+    (is_shub2() ? base + (BTE2OFF_DEST/8) 			\
+		: base + (BTEOFF_DEST/8))
+
+#define BTE_CTRL_ADDR(base)					\
+    (is_shub2() ? base + (BTE2OFF_CTRL/8) 			\
+		: base + (BTEOFF_CTRL/8))
+
+#define BTE_NOTIF_ADDR(base)					\
+    (is_shub2() ? base + (BTE2OFF_NOTIFY/8) 			\
+		: base + (BTEOFF_NOTIFY/8))
+
+/* Define hardware modes */
+#define BTE_NOTIFY IBCT_NOTIFY
+#define BTE_NORMAL BTE_NOTIFY
+#define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE)
+/* Use a reserved bit to let the caller specify a wait for any BTE */
+#define BTE_WACQUIRE 0x4000
+/* Use the BTE on the node with the destination memory */
+#define BTE_USE_DEST (BTE_WACQUIRE << 1)
+/* Use any available BTE interface on any node for the transfer */
+#define BTE_USE_ANY (BTE_USE_DEST << 1)
+/* macro to force the IBCT0 value valid */
+#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE))
+
+#define BTE_ACTIVE		(IBLS_BUSY | IBLS_ERROR)
+#define BTE_WORD_AVAILABLE	(IBLS_BUSY << 1)
+#define BTE_WORD_BUSY		(~BTE_WORD_AVAILABLE)
+
+/*
+ * Some macros to simplify reading.
+ * Start with macros to locate the BTE control registers.
+ */
+#define BTE_LNSTAT_LOAD(_bte)						\
+			HUB_L(_bte->bte_base_addr)
+#define BTE_LNSTAT_STORE(_bte, _x)					\
+			HUB_S(_bte->bte_base_addr, (_x))
+#define BTE_SRC_STORE(_bte, _x)						\
+({									\
+		u64 __addr = ((_x) & ~AS_MASK);				\
+		if (is_shub2()) 					\
+			__addr = SH2_TIO_PHYS_TO_DMA(__addr);		\
+		HUB_S(_bte->bte_source_addr, __addr);			\
+})
+#define BTE_DEST_STORE(_bte, _x)					\
+({									\
+		u64 __addr = ((_x) & ~AS_MASK);				\
+		if (is_shub2()) 					\
+			__addr = SH2_TIO_PHYS_TO_DMA(__addr);		\
+		HUB_S(_bte->bte_destination_addr, __addr);		\
+})
+#define BTE_CTRL_STORE(_bte, _x)					\
+			HUB_S(_bte->bte_control_addr, (_x))
+#define BTE_NOTIF_STORE(_bte, _x)					\
+({									\
+		u64 __addr = ia64_tpa((_x) & ~AS_MASK);			\
+		if (is_shub2()) 					\
+			__addr = SH2_TIO_PHYS_TO_DMA(__addr);		\
+		HUB_S(_bte->bte_notify_addr, __addr);			\
+})
+
+#define BTE_START_TRANSFER(_bte, _len, _mode)				\
+	is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY | (_mode << 24) | _len) \
+		: BTE_LNSTAT_STORE(_bte, _len);				\
+		  BTE_CTRL_STORE(_bte, _mode)
+
+/* Possible results from bte_copy and bte_unaligned_copy */
+/* The following error codes map into the BTE hardware codes
+ * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses
+ * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero
+ * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error
+ * codes to give the following error codes.
+ */
+#define BTEFAIL_OFFSET	1
+
+typedef enum {
+	BTE_SUCCESS,		/* 0 is success */
+	BTEFAIL_DIR,		/* Directory error due to IIO access*/
+	BTEFAIL_POISON,		/* poison error on IO access (write to poison page) */
+	BTEFAIL_WERR,		/* Write error (ie WINV to a Read only line) */
+	BTEFAIL_ACCESS,		/* access error (protection violation) */
+	BTEFAIL_PWERR,		/* Partial Write Error */
+	BTEFAIL_PRERR,		/* Partial Read Error */
+	BTEFAIL_TOUT,		/* CRB Time out */
+	BTEFAIL_XTERR,		/* Incoming xtalk pkt had error bit */
+	BTEFAIL_NOTAVAIL,	/* BTE not available */
+} bte_result_t;
+
+#define BTEFAIL_SH2_RESP_SHORT	0x1	/* bit 000001 */
+#define BTEFAIL_SH2_RESP_LONG	0x2	/* bit 000010 */
+#define BTEFAIL_SH2_RESP_DSP	0x4	/* bit 000100 */
+#define BTEFAIL_SH2_RESP_ACCESS	0x8	/* bit 001000 */
+#define BTEFAIL_SH2_CRB_TO	0x10	/* bit 010000 */
+#define BTEFAIL_SH2_NACK_LIMIT	0x20	/* bit 100000 */
+#define BTEFAIL_SH2_ALL		0x3F	/* bit 111111 */
+
+#define	BTE_ERR_BITS	0x3FUL
+#define	BTE_ERR_SHIFT	36
+#define BTE_ERR_MASK	(BTE_ERR_BITS << BTE_ERR_SHIFT)
+
+#define BTE_ERROR_RETRY(value)						\
+	(is_shub2() ? (value != BTEFAIL_SH2_CRB_TO)			\
+		: (value != BTEFAIL_TOUT))
+
+/*
+ * On shub1 BTE_ERR_MASK will always be false, so no need for is_shub2()
+ */
+#define BTE_SHUB2_ERROR(_status)					\
+	((_status & BTE_ERR_MASK) 					\
+	   ? (((_status >> BTE_ERR_SHIFT) & BTE_ERR_BITS) | IBLS_ERROR) \
+	   : _status)
+
+#define BTE_GET_ERROR_STATUS(_status)					\
+	(BTE_SHUB2_ERROR(_status) & ~IBLS_ERROR)
+
+#define BTE_VALID_SH2_ERROR(value)					\
+	((value >= BTEFAIL_SH2_RESP_SHORT) && (value <= BTEFAIL_SH2_ALL))
+
+/*
+ * Structure defining a bte.  An instance of this
+ * structure is created in the nodepda for each
+ * bte on that node (as defined by BTES_PER_NODE)
+ * This structure contains everything necessary
+ * to work with a BTE.
+ */
+struct bteinfo_s {
+	volatile u64 notify ____cacheline_aligned;
+	u64 *bte_base_addr ____cacheline_aligned;
+	u64 *bte_source_addr;
+	u64 *bte_destination_addr;
+	u64 *bte_control_addr;
+	u64 *bte_notify_addr;
+	spinlock_t spinlock;
+	cnodeid_t bte_cnode;	/* cnode                            */
+	int bte_error_count;	/* Number of errors encountered     */
+	int bte_num;		/* 0 --> BTE0, 1 --> BTE1           */
+	int cleanup_active;	/* Interface is locked for cleanup  */
+	volatile bte_result_t bh_error;	/* error while processing   */
+	volatile u64 *most_rcnt_na;
+	struct bteinfo_s *btes_to_try[MAX_BTES_PER_NODE];
+};
+
+
+/*
+ * Function prototypes (functions defined in bte.c, used elsewhere)
+ */
+extern bte_result_t bte_copy(u64, u64, u64, u64, void *);
+extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64);
+extern void bte_error_handler(unsigned long);
+
+#define bte_zero(dest, len, mode, notification) \
+	bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification)
+
+/*
+ * The following is the prefered way of calling bte_unaligned_copy
+ * If the copy is fully cache line aligned, then bte_copy is
+ * used instead.  Since bte_copy is inlined, this saves a call
+ * stack.  NOTE: bte_copy is called synchronously and does block
+ * until the transfer is complete.  In order to get the asynch
+ * version of bte_copy, you must perform this check yourself.
+ */
+#define BTE_UNALIGNED_COPY(src, dest, len, mode)                        \
+	(((len & L1_CACHE_MASK) || (src & L1_CACHE_MASK) ||             \
+	  (dest & L1_CACHE_MASK)) ?                                     \
+	 bte_unaligned_copy(src, dest, len, mode) :              	\
+	 bte_copy(src, dest, len, mode, NULL))
+
+
+#endif	/* _ASM_IA64_SN_BTE_H */
diff --git a/arch/ia64/include/asm/sn/clksupport.h b/arch/ia64/include/asm/sn/clksupport.h
new file mode 100644
index 000000000000..d340c365a824
--- /dev/null
+++ b/arch/ia64/include/asm/sn/clksupport.h
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+/*
+ * This file contains definitions for accessing a platform supported high resolution
+ * clock. The clock is monitonically increasing and can be accessed from any node
+ * in the system. The clock is synchronized across nodes - all nodes see the
+ * same value.
+ * 
+ *	RTC_COUNTER_ADDR - contains the address of the counter 
+ *
+ */
+
+#ifndef _ASM_IA64_SN_CLKSUPPORT_H
+#define _ASM_IA64_SN_CLKSUPPORT_H
+
+extern unsigned long sn_rtc_cycles_per_second;
+
+#define RTC_COUNTER_ADDR	((long *)LOCAL_MMR_ADDR(SH_RTC))
+
+#define rtc_time()		(*RTC_COUNTER_ADDR)
+
+#endif /* _ASM_IA64_SN_CLKSUPPORT_H */
diff --git a/arch/ia64/include/asm/sn/geo.h b/arch/ia64/include/asm/sn/geo.h
new file mode 100644
index 000000000000..f083c9434066
--- /dev/null
+++ b/arch/ia64/include/asm/sn/geo.h
@@ -0,0 +1,132 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_GEO_H
+#define _ASM_IA64_SN_GEO_H
+
+/* The geoid_t implementation below is based loosely on the pcfg_t
+   implementation in sys/SN/promcfg.h. */
+
+/* Type declaractions */
+
+/* Size of a geoid_t structure (must be before decl. of geoid_u) */
+#define GEOID_SIZE	8	/* Would 16 be better?  The size can
+				   be different on different platforms. */
+
+#define MAX_SLOTS	0xf	/* slots per module */
+#define MAX_SLABS	0xf	/* slabs per slot */
+
+typedef unsigned char	geo_type_t;
+
+/* Fields common to all substructures */
+typedef struct geo_common_s {
+    moduleid_t	module;		/* The module (box) this h/w lives in */
+    geo_type_t	type;		/* What type of h/w is named by this geoid_t */
+    slabid_t	slab:4;		/* slab (ASIC), 0 .. 15 within slot */
+    slotid_t	slot:4;		/* slot (Blade), 0 .. 15 within module */
+} geo_common_t;
+
+/* Additional fields for particular types of hardware */
+typedef struct geo_node_s {
+    geo_common_t	common;		/* No additional fields needed */
+} geo_node_t;
+
+typedef struct geo_rtr_s {
+    geo_common_t	common;		/* No additional fields needed */
+} geo_rtr_t;
+
+typedef struct geo_iocntl_s {
+    geo_common_t	common;		/* No additional fields needed */
+} geo_iocntl_t;
+
+typedef struct geo_pcicard_s {
+    geo_iocntl_t	common;
+    char		bus;	/* Bus/widget number */
+    char		slot;	/* PCI slot number */
+} geo_pcicard_t;
+
+/* Subcomponents of a node */
+typedef struct geo_cpu_s {
+    geo_node_t	node;
+    char	slice;		/* Which CPU on the node */
+} geo_cpu_t;
+
+typedef struct geo_mem_s {
+    geo_node_t	node;
+    char	membus;		/* The memory bus on the node */
+    char	memslot;	/* The memory slot on the bus */
+} geo_mem_t;
+
+
+typedef union geoid_u {
+    geo_common_t	common;
+    geo_node_t		node;
+    geo_iocntl_t	iocntl;
+    geo_pcicard_t	pcicard;
+    geo_rtr_t		rtr;
+    geo_cpu_t		cpu;
+    geo_mem_t		mem;
+    char		padsize[GEOID_SIZE];
+} geoid_t;
+
+
+/* Preprocessor macros */
+
+#define GEO_MAX_LEN	48	/* max. formatted length, plus some pad:
+				   module/001c07/slab/5/node/memory/2/slot/4 */
+
+/* Values for geo_type_t */
+#define GEO_TYPE_INVALID	0
+#define GEO_TYPE_MODULE		1
+#define GEO_TYPE_NODE		2
+#define GEO_TYPE_RTR		3
+#define GEO_TYPE_IOCNTL		4
+#define GEO_TYPE_IOCARD		5
+#define GEO_TYPE_CPU		6
+#define GEO_TYPE_MEM		7
+#define GEO_TYPE_MAX		(GEO_TYPE_MEM+1)
+
+/* Parameter for hwcfg_format_geoid_compt() */
+#define GEO_COMPT_MODULE	1
+#define GEO_COMPT_SLAB		2
+#define GEO_COMPT_IOBUS		3
+#define GEO_COMPT_IOSLOT	4
+#define GEO_COMPT_CPU		5
+#define GEO_COMPT_MEMBUS	6
+#define GEO_COMPT_MEMSLOT	7
+
+#define GEO_INVALID_STR		"<invalid>"
+
+#define INVALID_NASID           ((nasid_t)-1)
+#define INVALID_CNODEID         ((cnodeid_t)-1)
+#define INVALID_PNODEID         ((pnodeid_t)-1)
+#define INVALID_SLAB            (slabid_t)-1
+#define INVALID_SLOT            (slotid_t)-1
+#define INVALID_MODULE          ((moduleid_t)-1)
+
+static inline slabid_t geo_slab(geoid_t g)
+{
+	return (g.common.type == GEO_TYPE_INVALID) ?
+		INVALID_SLAB : g.common.slab;
+}
+
+static inline slotid_t geo_slot(geoid_t g)
+{
+	return (g.common.type == GEO_TYPE_INVALID) ?
+		INVALID_SLOT : g.common.slot;
+}
+
+static inline moduleid_t geo_module(geoid_t g)
+{
+	return (g.common.type == GEO_TYPE_INVALID) ?
+		INVALID_MODULE : g.common.module;
+}
+
+extern geoid_t cnodeid_get_geoid(cnodeid_t cnode);
+
+#endif /* _ASM_IA64_SN_GEO_H */
diff --git a/arch/ia64/include/asm/sn/intr.h b/arch/ia64/include/asm/sn/intr.h
new file mode 100644
index 000000000000..e0487aa97418
--- /dev/null
+++ b/arch/ia64/include/asm/sn/intr.h
@@ -0,0 +1,68 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_INTR_H
+#define _ASM_IA64_SN_INTR_H
+
+#include <linux/rcupdate.h>
+#include <asm/sn/types.h>
+
+#define SGI_UART_VECTOR		0xe9
+
+/* Reserved IRQs : Note, not to exceed IA64_SN2_FIRST_DEVICE_VECTOR */
+#define SGI_XPC_ACTIVATE	0x30
+#define SGI_II_ERROR		0x31
+#define SGI_XBOW_ERROR		0x32
+#define SGI_PCIASIC_ERROR	0x33
+#define SGI_ACPI_SCI_INT	0x34
+#define SGI_TIOCA_ERROR		0x35
+#define SGI_TIO_ERROR		0x36
+#define SGI_TIOCX_ERROR		0x37
+#define SGI_MMTIMER_VECTOR	0x38
+#define SGI_XPC_NOTIFY		0xe7
+
+#define IA64_SN2_FIRST_DEVICE_VECTOR	0x3c
+#define IA64_SN2_LAST_DEVICE_VECTOR	0xe6
+
+#define SN2_IRQ_RESERVED	0x1
+#define SN2_IRQ_CONNECTED	0x2
+#define SN2_IRQ_SHARED		0x4
+
+// The SN PROM irq struct
+struct sn_irq_info {
+	struct sn_irq_info *irq_next;	/* deprecated DO NOT USE     */
+	short		irq_nasid;	/* Nasid IRQ is assigned to  */
+	int		irq_slice;	/* slice IRQ is assigned to  */
+	int		irq_cpuid;	/* kernel logical cpuid	     */
+	int		irq_irq;	/* the IRQ number */
+	int		irq_int_bit;	/* Bridge interrupt pin */
+					/* <0 means MSI */
+	u64	irq_xtalkaddr;	/* xtalkaddr IRQ is sent to  */
+	int		irq_bridge_type;/* pciio asic type (pciio.h) */
+	void	       *irq_bridge;	/* bridge generating irq     */
+	void	       *irq_pciioinfo;	/* associated pciio_info_t   */
+	int		irq_last_intr;	/* For Shub lb lost intr WAR */
+	int		irq_cookie;	/* unique cookie 	     */
+	int		irq_flags;	/* flags */
+	int		irq_share_cnt;	/* num devices sharing IRQ   */
+	struct list_head	list;	/* list of sn_irq_info structs */
+	struct rcu_head		rcu;	/* rcu callback list */
+};
+
+extern void sn_send_IPI_phys(int, long, int, int);
+extern u64 sn_intr_alloc(nasid_t, int,
+			      struct sn_irq_info *,
+			      int, nasid_t, int);
+extern void sn_intr_free(nasid_t, int, struct sn_irq_info *);
+extern struct sn_irq_info *sn_retarget_vector(struct sn_irq_info *, nasid_t, int);
+extern void sn_set_err_irq_affinity(unsigned int);
+extern struct list_head **sn_irq_lh;
+
+#define CPU_VECTOR_TO_IRQ(cpuid,vector) (vector)
+
+#endif /* _ASM_IA64_SN_INTR_H */
diff --git a/arch/ia64/include/asm/sn/io.h b/arch/ia64/include/asm/sn/io.h
new file mode 100644
index 000000000000..41c73a735628
--- /dev/null
+++ b/arch/ia64/include/asm/sn/io.h
@@ -0,0 +1,274 @@
+/* 
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_SN_IO_H
+#define _ASM_SN_IO_H
+#include <linux/compiler.h>
+#include <asm/intrinsics.h>
+
+extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */
+extern void __sn_mmiowb(void); /* Forward definition */
+
+extern int num_cnodes;
+
+#define __sn_mf_a()   ia64_mfa()
+
+extern void sn_dma_flush(unsigned long);
+
+#define __sn_inb ___sn_inb
+#define __sn_inw ___sn_inw
+#define __sn_inl ___sn_inl
+#define __sn_outb ___sn_outb
+#define __sn_outw ___sn_outw
+#define __sn_outl ___sn_outl
+#define __sn_readb ___sn_readb
+#define __sn_readw ___sn_readw
+#define __sn_readl ___sn_readl
+#define __sn_readq ___sn_readq
+#define __sn_readb_relaxed ___sn_readb_relaxed
+#define __sn_readw_relaxed ___sn_readw_relaxed
+#define __sn_readl_relaxed ___sn_readl_relaxed
+#define __sn_readq_relaxed ___sn_readq_relaxed
+
+/*
+ * Convenience macros for setting/clearing bits using the above accessors
+ */
+
+#define __sn_setq_relaxed(addr, val) \
+	writeq((__sn_readq_relaxed(addr) | (val)), (addr))
+#define __sn_clrq_relaxed(addr, val) \
+	writeq((__sn_readq_relaxed(addr) & ~(val)), (addr))
+
+/*
+ * The following routines are SN Platform specific, called when
+ * a reference is made to inX/outX set macros.  SN Platform
+ * inX set of macros ensures that Posted DMA writes on the
+ * Bridge is flushed.
+ *
+ * The routines should be self explainatory.
+ */
+
+static inline unsigned int
+___sn_inb (unsigned long port)
+{
+	volatile unsigned char *addr;
+	unsigned char ret = -1;
+
+	if ((addr = sn_io_addr(port))) {
+		ret = *addr;
+		__sn_mf_a();
+		sn_dma_flush((unsigned long)addr);
+	}
+	return ret;
+}
+
+static inline unsigned int
+___sn_inw (unsigned long port)
+{
+	volatile unsigned short *addr;
+	unsigned short ret = -1;
+
+	if ((addr = sn_io_addr(port))) {
+		ret = *addr;
+		__sn_mf_a();
+		sn_dma_flush((unsigned long)addr);
+	}
+	return ret;
+}
+
+static inline unsigned int
+___sn_inl (unsigned long port)
+{
+	volatile unsigned int *addr;
+	unsigned int ret = -1;
+
+	if ((addr = sn_io_addr(port))) {
+		ret = *addr;
+		__sn_mf_a();
+		sn_dma_flush((unsigned long)addr);
+	}
+	return ret;
+}
+
+static inline void
+___sn_outb (unsigned char val, unsigned long port)
+{
+	volatile unsigned char *addr;
+
+	if ((addr = sn_io_addr(port))) {
+		*addr = val;
+		__sn_mmiowb();
+	}
+}
+
+static inline void
+___sn_outw (unsigned short val, unsigned long port)
+{
+	volatile unsigned short *addr;
+
+	if ((addr = sn_io_addr(port))) {
+		*addr = val;
+		__sn_mmiowb();
+	}
+}
+
+static inline void
+___sn_outl (unsigned int val, unsigned long port)
+{
+	volatile unsigned int *addr;
+
+	if ((addr = sn_io_addr(port))) {
+		*addr = val;
+		__sn_mmiowb();
+	}
+}
+
+/*
+ * The following routines are SN Platform specific, called when 
+ * a reference is made to readX/writeX set macros.  SN Platform 
+ * readX set of macros ensures that Posted DMA writes on the 
+ * Bridge is flushed.
+ * 
+ * The routines should be self explainatory.
+ */
+
+static inline unsigned char
+___sn_readb (const volatile void __iomem *addr)
+{
+	unsigned char val;
+
+	val = *(volatile unsigned char __force *)addr;
+	__sn_mf_a();
+	sn_dma_flush((unsigned long)addr);
+        return val;
+}
+
+static inline unsigned short
+___sn_readw (const volatile void __iomem *addr)
+{
+	unsigned short val;
+
+	val = *(volatile unsigned short __force *)addr;
+	__sn_mf_a();
+	sn_dma_flush((unsigned long)addr);
+        return val;
+}
+
+static inline unsigned int
+___sn_readl (const volatile void __iomem *addr)
+{
+	unsigned int val;
+
+	val = *(volatile unsigned int __force *)addr;
+	__sn_mf_a();
+	sn_dma_flush((unsigned long)addr);
+        return val;
+}
+
+static inline unsigned long
+___sn_readq (const volatile void __iomem *addr)
+{
+	unsigned long val;
+
+	val = *(volatile unsigned long __force *)addr;
+	__sn_mf_a();
+	sn_dma_flush((unsigned long)addr);
+        return val;
+}
+
+/*
+ * For generic and SN2 kernels, we have a set of fast access
+ * PIO macros.	These macros are provided on SN Platform
+ * because the normal inX and readX macros perform an
+ * additional task of flushing Post DMA request on the Bridge.
+ *
+ * These routines should be self explainatory.
+ */
+
+static inline unsigned int
+sn_inb_fast (unsigned long port)
+{
+	volatile unsigned char *addr = (unsigned char *)port;
+	unsigned char ret;
+
+	ret = *addr;
+	__sn_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+sn_inw_fast (unsigned long port)
+{
+	volatile unsigned short *addr = (unsigned short *)port;
+	unsigned short ret;
+
+	ret = *addr;
+	__sn_mf_a();
+	return ret;
+}
+
+static inline unsigned int
+sn_inl_fast (unsigned long port)
+{
+	volatile unsigned int *addr = (unsigned int *)port;
+	unsigned int ret;
+
+	ret = *addr;
+	__sn_mf_a();
+	return ret;
+}
+
+static inline unsigned char
+___sn_readb_relaxed (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned char __force *)addr;
+}
+
+static inline unsigned short
+___sn_readw_relaxed (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short __force *)addr;
+}
+
+static inline unsigned int
+___sn_readl_relaxed (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int __force *) addr;
+}
+
+static inline unsigned long
+___sn_readq_relaxed (const volatile void __iomem *addr)
+{
+	return *(volatile unsigned long __force *) addr;
+}
+
+struct pci_dev;
+
+static inline int
+sn_pci_set_vchan(struct pci_dev *pci_dev, unsigned long *addr, int vchan)
+{
+
+	if (vchan > 1) {
+		return -1;
+	}
+
+	if (!(*addr >> 32))	/* Using a mask here would be cleaner */
+		return 0;	/* but this generates better code */
+
+	if (vchan == 1) {
+		/* Set Bit 57 */
+		*addr |= (1UL << 57);
+	} else {
+		/* Clear Bit 57 */
+		*addr &= ~(1UL << 57);
+	}
+
+	return 0;
+}
+
+#endif	/* _ASM_SN_IO_H */
diff --git a/arch/ia64/include/asm/sn/ioc3.h b/arch/ia64/include/asm/sn/ioc3.h
new file mode 100644
index 000000000000..95ed6cc83cf1
--- /dev/null
+++ b/arch/ia64/include/asm/sn/ioc3.h
@@ -0,0 +1,241 @@
+/*
+ * Copyright (C) 2005 Silicon Graphics, Inc.
+ */
+#ifndef IA64_SN_IOC3_H
+#define IA64_SN_IOC3_H
+
+/* serial port register map */
+struct ioc3_serialregs {
+	uint32_t sscr;
+	uint32_t stpir;
+	uint32_t stcir;
+	uint32_t srpir;
+	uint32_t srcir;
+	uint32_t srtr;
+	uint32_t shadow;
+};
+
+/* SUPERIO uart register map */
+struct ioc3_uartregs {
+	char iu_lcr;
+	union {
+		char iir;	/* read only */
+		char fcr;	/* write only */
+	} u3;
+	union {
+		char ier;	/* DLAB == 0 */
+		char dlm;	/* DLAB == 1 */
+	} u2;
+	union {
+		char rbr;	/* read only, DLAB == 0 */
+		char thr;	/* write only, DLAB == 0 */
+		char dll;	/* DLAB == 1 */
+	} u1;
+	char iu_scr;
+	char iu_msr;
+	char iu_lsr;
+	char iu_mcr;
+};
+
+#define iu_rbr u1.rbr
+#define iu_thr u1.thr
+#define iu_dll u1.dll
+#define iu_ier u2.ier
+#define iu_dlm u2.dlm
+#define iu_iir u3.iir
+#define iu_fcr u3.fcr
+
+struct ioc3_sioregs {
+	char fill[0x170];
+	struct ioc3_uartregs uartb;
+	struct ioc3_uartregs uarta;
+};
+
+/* PCI IO/mem space register map */
+struct ioc3 {
+	uint32_t pci_id;
+	uint32_t pci_scr;
+	uint32_t pci_rev;
+	uint32_t pci_lat;
+	uint32_t pci_addr;
+	uint32_t pci_err_addr_l;
+	uint32_t pci_err_addr_h;
+
+	uint32_t sio_ir;
+	/* these registers are read-only for general kernel code. To
+	 * modify them use the functions in ioc3.c
+	 */
+	uint32_t sio_ies;
+	uint32_t sio_iec;
+	uint32_t sio_cr;
+	uint32_t int_out;
+	uint32_t mcr;
+	uint32_t gpcr_s;
+	uint32_t gpcr_c;
+	uint32_t gpdr;
+	uint32_t gppr[9];
+	char fill[0x4c];
+
+	/* serial port registers */
+	uint32_t sbbr_h;
+	uint32_t sbbr_l;
+
+	struct ioc3_serialregs port_a;
+	struct ioc3_serialregs port_b;
+	char fill1[0x1ff10];
+	/* superio registers */
+	struct ioc3_sioregs sregs;
+};
+
+/* These don't exist on the ioc3 serial card... */
+#define eier	fill1[8]
+#define eisr	fill1[4]
+
+#define PCI_LAT			0xc	/* Latency Timer */
+#define PCI_SCR_DROP_MODE_EN	0x00008000 /* drop pios on parity err */
+#define UARTA_BASE		0x178
+#define UARTB_BASE		0x170
+
+
+/* bitmasks for serial RX status byte */
+#define RXSB_OVERRUN		0x01	/* char(s) lost */
+#define RXSB_PAR_ERR		0x02	/* parity error */
+#define RXSB_FRAME_ERR		0x04	/* framing error */
+#define RXSB_BREAK		0x08	/* break character */
+#define RXSB_CTS		0x10	/* state of CTS */
+#define RXSB_DCD		0x20	/* state of DCD */
+#define RXSB_MODEM_VALID	0x40	/* DCD, CTS and OVERRUN are valid */
+#define RXSB_DATA_VALID		0x80	/* FRAME_ERR PAR_ERR & BREAK valid */
+
+/* bitmasks for serial TX control byte */
+#define TXCB_INT_WHEN_DONE	0x20	/* interrupt after this byte is sent */
+#define TXCB_INVALID		0x00	/* byte is invalid */
+#define TXCB_VALID		0x40	/* byte is valid */
+#define TXCB_MCR		0x80	/* data<7:0> to modem cntrl register */
+#define TXCB_DELAY		0xc0	/* delay data<7:0> mSec */
+
+/* bitmasks for SBBR_L */
+#define SBBR_L_SIZE		0x00000001	/* 0 1KB rings, 1 4KB rings */
+
+/* bitmasks for SSCR_<A:B> */
+#define SSCR_RX_THRESHOLD	0x000001ff	/* hiwater mark */
+#define SSCR_TX_TIMER_BUSY	0x00010000	/* TX timer in progress */
+#define SSCR_HFC_EN		0x00020000	/* h/w flow cntrl enabled */
+#define SSCR_RX_RING_DCD	0x00040000	/* postRX record on delta-DCD */
+#define SSCR_RX_RING_CTS	0x00080000	/* postRX record on delta-CTS */
+#define SSCR_HIGH_SPD		0x00100000	/* 4X speed */
+#define SSCR_DIAG		0x00200000	/* bypass clock divider */
+#define SSCR_RX_DRAIN		0x08000000	/* drain RX buffer to memory */
+#define SSCR_DMA_EN		0x10000000	/* enable ring buffer DMA */
+#define SSCR_DMA_PAUSE		0x20000000	/* pause DMA */
+#define SSCR_PAUSE_STATE	0x40000000	/* set when PAUSE takes effect*/
+#define SSCR_RESET		0x80000000	/* reset DMA channels */
+
+/* all producer/comsumer pointers are the same bitfield */
+#define PROD_CONS_PTR_4K	0x00000ff8	/* for 4K buffers */
+#define PROD_CONS_PTR_1K	0x000003f8	/* for 1K buffers */
+#define PROD_CONS_PTR_OFF	3
+
+/* bitmasks for SRCIR_<A:B> */
+#define SRCIR_ARM		0x80000000	/* arm RX timer */
+
+/* bitmasks for SHADOW_<A:B> */
+#define SHADOW_DR		0x00000001	/* data ready */
+#define SHADOW_OE		0x00000002	/* overrun error */
+#define SHADOW_PE		0x00000004	/* parity error */
+#define SHADOW_FE		0x00000008	/* framing error */
+#define SHADOW_BI		0x00000010	/* break interrupt */
+#define SHADOW_THRE		0x00000020	/* transmit holding reg empty */
+#define SHADOW_TEMT		0x00000040	/* transmit shift reg empty */
+#define SHADOW_RFCE		0x00000080	/* char in RX fifo has error */
+#define SHADOW_DCTS		0x00010000	/* delta clear to send */
+#define SHADOW_DDCD		0x00080000	/* delta data carrier detect */
+#define SHADOW_CTS		0x00100000	/* clear to send */
+#define SHADOW_DCD		0x00800000	/* data carrier detect */
+#define SHADOW_DTR		0x01000000	/* data terminal ready */
+#define SHADOW_RTS		0x02000000	/* request to send */
+#define SHADOW_OUT1		0x04000000	/* 16550 OUT1 bit */
+#define SHADOW_OUT2		0x08000000	/* 16550 OUT2 bit */
+#define SHADOW_LOOP		0x10000000	/* loopback enabled */
+
+/* bitmasks for SRTR_<A:B> */
+#define SRTR_CNT		0x00000fff	/* reload value for RX timer */
+#define SRTR_CNT_VAL		0x0fff0000	/* current value of RX timer */
+#define SRTR_CNT_VAL_SHIFT	16
+#define SRTR_HZ			16000		/* SRTR clock frequency */
+
+/* bitmasks for SIO_IR, SIO_IEC and SIO_IES  */
+#define SIO_IR_SA_TX_MT		0x00000001	/* Serial port A TX empty */
+#define SIO_IR_SA_RX_FULL	0x00000002	/* port A RX buf full */
+#define SIO_IR_SA_RX_HIGH	0x00000004	/* port A RX hiwat */
+#define SIO_IR_SA_RX_TIMER	0x00000008	/* port A RX timeout */
+#define SIO_IR_SA_DELTA_DCD	0x00000010	/* port A delta DCD */
+#define SIO_IR_SA_DELTA_CTS	0x00000020	/* port A delta CTS */
+#define SIO_IR_SA_INT		0x00000040	/* port A pass-thru intr */
+#define SIO_IR_SA_TX_EXPLICIT	0x00000080	/* port A explicit TX thru */
+#define SIO_IR_SA_MEMERR	0x00000100	/* port A PCI error */
+#define SIO_IR_SB_TX_MT		0x00000200
+#define SIO_IR_SB_RX_FULL	0x00000400
+#define SIO_IR_SB_RX_HIGH	0x00000800
+#define SIO_IR_SB_RX_TIMER	0x00001000
+#define SIO_IR_SB_DELTA_DCD	0x00002000
+#define SIO_IR_SB_DELTA_CTS	0x00004000
+#define SIO_IR_SB_INT		0x00008000
+#define SIO_IR_SB_TX_EXPLICIT	0x00010000
+#define SIO_IR_SB_MEMERR	0x00020000
+#define SIO_IR_PP_INT		0x00040000	/* P port pass-thru intr */
+#define SIO_IR_PP_INTA		0x00080000	/* PP context A thru */
+#define SIO_IR_PP_INTB		0x00100000	/* PP context B thru */
+#define SIO_IR_PP_MEMERR	0x00200000	/* PP PCI error */
+#define SIO_IR_KBD_INT		0x00400000	/* kbd/mouse intr */
+#define SIO_IR_RT_INT		0x08000000	/* RT output pulse */
+#define SIO_IR_GEN_INT1		0x10000000	/* RT input pulse */
+#define SIO_IR_GEN_INT_SHIFT	28
+
+/* per device interrupt masks */
+#define SIO_IR_SA		(SIO_IR_SA_TX_MT | \
+				 SIO_IR_SA_RX_FULL | \
+				 SIO_IR_SA_RX_HIGH | \
+				 SIO_IR_SA_RX_TIMER | \
+				 SIO_IR_SA_DELTA_DCD | \
+				 SIO_IR_SA_DELTA_CTS | \
+				 SIO_IR_SA_INT | \
+				 SIO_IR_SA_TX_EXPLICIT | \
+				 SIO_IR_SA_MEMERR)
+
+#define SIO_IR_SB		(SIO_IR_SB_TX_MT | \
+				 SIO_IR_SB_RX_FULL | \
+				 SIO_IR_SB_RX_HIGH | \
+				 SIO_IR_SB_RX_TIMER | \
+				 SIO_IR_SB_DELTA_DCD | \
+				 SIO_IR_SB_DELTA_CTS | \
+				 SIO_IR_SB_INT | \
+				 SIO_IR_SB_TX_EXPLICIT | \
+				 SIO_IR_SB_MEMERR)
+
+#define SIO_IR_PP		(SIO_IR_PP_INT | SIO_IR_PP_INTA | \
+				 SIO_IR_PP_INTB | SIO_IR_PP_MEMERR)
+#define SIO_IR_RT		(SIO_IR_RT_INT | SIO_IR_GEN_INT1)
+
+/* bitmasks for SIO_CR */
+#define SIO_CR_CMD_PULSE_SHIFT 15
+#define SIO_CR_SER_A_BASE_SHIFT 1
+#define SIO_CR_SER_B_BASE_SHIFT 8
+#define SIO_CR_ARB_DIAG		0x00380000	/* cur !enet PCI requet (ro) */
+#define SIO_CR_ARB_DIAG_TXA	0x00000000
+#define SIO_CR_ARB_DIAG_RXA	0x00080000
+#define SIO_CR_ARB_DIAG_TXB	0x00100000
+#define SIO_CR_ARB_DIAG_RXB	0x00180000
+#define SIO_CR_ARB_DIAG_PP	0x00200000
+#define SIO_CR_ARB_DIAG_IDLE	0x00400000	/* 0 -> active request (ro) */
+
+/* defs for some of the generic I/O pins */
+#define GPCR_PHY_RESET		0x20	/* pin is output to PHY reset */
+#define GPCR_UARTB_MODESEL	0x40	/* pin is output to port B mode sel */
+#define GPCR_UARTA_MODESEL	0x80	/* pin is output to port A mode sel */
+
+#define GPPR_PHY_RESET_PIN	5	/* GIO pin controlling phy reset */
+#define GPPR_UARTB_MODESEL_PIN	6	/* GIO pin cntrling uartb modeselect */
+#define GPPR_UARTA_MODESEL_PIN	7	/* GIO pin cntrling uarta modeselect */
+
+#endif /* IA64_SN_IOC3_H */
diff --git a/arch/ia64/include/asm/sn/klconfig.h b/arch/ia64/include/asm/sn/klconfig.h
new file mode 100644
index 000000000000..bcbf209d63be
--- /dev/null
+++ b/arch/ia64/include/asm/sn/klconfig.h
@@ -0,0 +1,246 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from IRIX <sys/SN/klconfig.h>.
+ *
+ * Copyright (C) 1992-1997,1999,2001-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_IA64_SN_KLCONFIG_H
+#define _ASM_IA64_SN_KLCONFIG_H
+
+/*
+ * The KLCONFIG structures store info about the various BOARDs found
+ * during Hardware Discovery. In addition, it stores info about the
+ * components found on the BOARDs.
+ */
+
+typedef s32 klconf_off_t;
+
+
+/* Functions/macros needed to use this structure */
+
+typedef struct kl_config_hdr {
+	char		pad[20];
+	klconf_off_t	ch_board_info;	/* the link list of boards */
+	char		pad0[88];
+} kl_config_hdr_t;
+
+
+#define NODE_OFFSET_TO_LBOARD(nasid,off)        (lboard_t*)(GLOBAL_CAC_ADDR((nasid), (off)))
+
+/*
+ * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
+ * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to 
+ * the LOCAL/current NODE. REMOTE means it is attached to a different
+ * node.(TBD - Need a way to treat ROUTER boards.)
+ *
+ * There are 2 different structures to represent these boards -
+ * lboard - Local board, rboard - remote board. These 2 structures
+ * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
+ * Figure below). The first byte of the rboard or lboard structure
+ * is used to find out its type - no unions are used.
+ * If it is a lboard, then the config info of this board will be found
+ * on the local node. (LOCAL NODE BASE + offset value gives pointer to 
+ * the structure.
+ * If it is a rboard, the local structure contains the node number
+ * and the offset of the beginning of the LINKED LIST on the remote node.
+ * The details of the hardware on a remote node can be built locally,
+ * if required, by reading the LINKED LIST on the remote node and 
+ * ignoring all the rboards on that node.
+ *
+ * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the 
+ * First board info on the remote node. The remote node list is 
+ * traversed as the local list, using the REMOTE BASE ADDRESS and not
+ * the local base address and ignoring all rboard values.
+ *
+ * 
+ KLCONFIG
+
+ +------------+      +------------+      +------------+      +------------+
+ |  lboard    |  +-->|   lboard   |  +-->|   rboard   |  +-->|   lboard   |
+ +------------+  |   +------------+  |   +------------+  |   +------------+
+ | board info |  |   | board info |  |   |errinfo,bptr|  |   | board info |
+ +------------+  |   +------------+  |   +------------+  |   +------------+
+ | offset     |--+   |  offset    |--+   |  offset    |--+   |offset=NULL |
+ +------------+      +------------+      +------------+      +------------+
+
+
+ +------------+
+ | board info |
+ +------------+       +--------------------------------+
+ | compt 1    |------>| type, rev, diaginfo, size ...  |  (CPU)
+ +------------+       +--------------------------------+
+ | compt 2    |--+
+ +------------+  |    +--------------------------------+
+ |  ...       |  +--->| type, rev, diaginfo, size ...  |  (MEM_BANK)
+ +------------+       +--------------------------------+
+ | errinfo    |--+
+ +------------+  |    +--------------------------------+
+                 +--->|r/l brd errinfo,compt err flags |
+                      +--------------------------------+
+
+ *
+ * Each BOARD consists of COMPONENTs and the BOARD structure has 
+ * pointers (offsets) to its COMPONENT structure.
+ * The COMPONENT structure has version info, size and speed info, revision,
+ * error info and the NIC info. This structure can accommodate any
+ * BOARD with arbitrary COMPONENT composition.
+ *
+ * The ERRORINFO part of each BOARD has error information
+ * that describes errors about the BOARD itself. It also has flags to
+ * indicate the COMPONENT(s) on the board that have errors. The error 
+ * information specific to the COMPONENT is present in the respective 
+ * COMPONENT structure.
+ *
+ * The ERRORINFO structure is also treated like a COMPONENT, ie. the 
+ * BOARD has pointers(offset) to the ERRORINFO structure. The rboard
+ * structure also has a pointer to the ERRORINFO structure. This is 
+ * the place to store ERRORINFO about a REMOTE NODE, if the HUB on
+ * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where 
+ * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
+ * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info 
+ * which is present on the REMOTE NODE.(TBD)
+ * REMOTE ERRINFO can be stored on any of the nearest nodes 
+ * or on all the nearest nodes.(TBD)
+ * Like BOARD structures, REMOTE ERRINFO structures can be built locally
+ * using the rboard errinfo pointer.
+ *
+ * In order to get useful information from this Data organization, a set of
+ * interface routines are provided (TBD). The important thing to remember while
+ * manipulating the structures, is that, the NODE number information should
+ * be used. If the NODE is non-zero (remote) then each offset should
+ * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR. 
+ * This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
+ * 
+ * Note that these structures do not provide much info about connectivity.
+ * That info will be part of HWGRAPH, which is an extension of the cfg_t
+ * data structure. (ref IP27prom/cfg.h) It has to be extended to include
+ * the IO part of the Network(TBD).
+ *
+ * The data structures below define the above concepts.
+ */
+
+
+/*
+ * BOARD classes
+ */
+
+#define KLCLASS_MASK	0xf0   
+#define KLCLASS_NONE	0x00
+#define KLCLASS_NODE	0x10             /* CPU, Memory and HUB board */
+#define KLCLASS_CPU	KLCLASS_NODE	
+#define KLCLASS_IO	0x20             /* BaseIO, 4 ch SCSI, ethernet, FDDI 
+					    and the non-graphics widget boards */
+#define KLCLASS_ROUTER	0x30             /* Router board */
+#define KLCLASS_MIDPLANE 0x40            /* We need to treat this as a board
+                                            so that we can record error info */
+#define KLCLASS_IOBRICK	0x70		/* IP35 iobrick */
+#define KLCLASS_MAX	8		/* Bump this if a new CLASS is added */
+
+#define KLCLASS(_x) ((_x) & KLCLASS_MASK)
+
+
+/*
+ * board types
+ */
+
+#define KLTYPE_MASK	0x0f
+#define KLTYPE(_x)      ((_x) & KLTYPE_MASK)
+
+#define KLTYPE_SNIA	(KLCLASS_CPU | 0x1)
+#define KLTYPE_TIO	(KLCLASS_CPU | 0x2)
+
+#define KLTYPE_ROUTER     (KLCLASS_ROUTER | 0x1)
+#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
+#define KLTYPE_REPEATER_ROUTER (KLCLASS_ROUTER | 0x4)
+
+#define KLTYPE_IOBRICK_XBOW	(KLCLASS_MIDPLANE | 0x2)
+
+#define KLTYPE_IOBRICK		(KLCLASS_IOBRICK | 0x0)
+#define KLTYPE_NBRICK		(KLCLASS_IOBRICK | 0x4)
+#define KLTYPE_PXBRICK		(KLCLASS_IOBRICK | 0x6)
+#define KLTYPE_IXBRICK		(KLCLASS_IOBRICK | 0x7)
+#define KLTYPE_CGBRICK		(KLCLASS_IOBRICK | 0x8)
+#define KLTYPE_OPUSBRICK	(KLCLASS_IOBRICK | 0x9)
+#define KLTYPE_SABRICK          (KLCLASS_IOBRICK | 0xa)
+#define KLTYPE_IABRICK		(KLCLASS_IOBRICK | 0xb)
+#define KLTYPE_PABRICK          (KLCLASS_IOBRICK | 0xc)
+#define KLTYPE_GABRICK		(KLCLASS_IOBRICK | 0xd)
+
+
+/* 
+ * board structures
+ */
+
+#define MAX_COMPTS_PER_BRD 24
+
+typedef struct lboard_s {
+	klconf_off_t 	brd_next_any;     /* Next BOARD */
+	unsigned char 	struct_type;      /* type of structure, local or remote */
+	unsigned char 	brd_type;         /* type+class */
+	unsigned char 	brd_sversion;     /* version of this structure */
+        unsigned char 	brd_brevision;    /* board revision */
+        unsigned char 	brd_promver;      /* board prom version, if any */
+ 	unsigned char 	brd_flags;        /* Enabled, Disabled etc */
+	unsigned char 	brd_slot;         /* slot number */
+	unsigned short	brd_debugsw;      /* Debug switches */
+	geoid_t		brd_geoid;	  /* geo id */
+	partid_t 	brd_partition;    /* Partition number */
+        unsigned short 	brd_diagval;      /* diagnostic value */
+        unsigned short 	brd_diagparm;     /* diagnostic parameter */
+        unsigned char 	brd_inventory;    /* inventory history */
+        unsigned char 	brd_numcompts;    /* Number of components */
+        nic_t         	brd_nic;          /* Number in CAN */
+	nasid_t		brd_nasid;        /* passed parameter */
+	klconf_off_t 	brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
+	klconf_off_t 	brd_errinfo;      /* Board's error information */
+	struct lboard_s *brd_parent;	  /* Logical parent for this brd */
+	char            pad0[4];
+	unsigned char	brd_confidence;	  /* confidence that the board is bad */
+	nasid_t		brd_owner;        /* who owns this board */
+	unsigned char 	brd_nic_flags;    /* To handle 8 more NICs */
+	char		pad1[24];	  /* future expansion */
+	char		brd_name[32];
+	nasid_t		brd_next_same_host; /* host of next brd w/same nasid */
+	klconf_off_t	brd_next_same;    /* Next BOARD with same nasid */
+} lboard_t;
+
+/*
+ * Generic info structure. This stores common info about a 
+ * component.
+ */
+ 
+typedef struct klinfo_s {                  /* Generic info */
+        unsigned char   struct_type;       /* type of this structure */
+        unsigned char   struct_version;    /* version of this structure */
+        unsigned char   flags;            /* Enabled, disabled etc */
+        unsigned char   revision;         /* component revision */
+        unsigned short  diagval;          /* result of diagnostics */
+        unsigned short  diagparm;         /* diagnostic parameter */
+        unsigned char   inventory;        /* previous inventory status */
+        unsigned short  partid;		   /* widget part number */
+	nic_t 		nic;              /* MUst be aligned properly */
+        unsigned char   physid;           /* physical id of component */
+        unsigned int    virtid;           /* virtual id as seen by system */
+	unsigned char	widid;	          /* Widget id - if applicable */
+	nasid_t		nasid;            /* node number - from parent */
+	char		pad1;		  /* pad out structure. */
+	char		pad2;		  /* pad out structure. */
+	void		*data;
+        klconf_off_t	errinfo;          /* component specific errors */
+        unsigned short  pad3;             /* pci fields have moved over to */
+        unsigned short  pad4;             /* klbri_t */
+} klinfo_t ;
+
+
+static inline lboard_t *find_lboard_next(lboard_t * brd)
+{
+	if (brd && brd->brd_next_any)
+		return NODE_OFFSET_TO_LBOARD(NASID_GET(brd), brd->brd_next_any);
+        return NULL;
+}
+
+#endif /* _ASM_IA64_SN_KLCONFIG_H */
diff --git a/arch/ia64/include/asm/sn/l1.h b/arch/ia64/include/asm/sn/l1.h
new file mode 100644
index 000000000000..344bf44bb356
--- /dev/null
+++ b/arch/ia64/include/asm/sn/l1.h
@@ -0,0 +1,51 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992-1997,2000-2004 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+
+#ifndef _ASM_IA64_SN_L1_H
+#define _ASM_IA64_SN_L1_H
+
+/* brick type response codes */
+#define L1_BRICKTYPE_PX         0x23            /* # */
+#define L1_BRICKTYPE_PE         0x25            /* % */
+#define L1_BRICKTYPE_N_p0       0x26            /* & */
+#define L1_BRICKTYPE_IP45       0x34            /* 4 */
+#define L1_BRICKTYPE_IP41       0x35            /* 5 */
+#define L1_BRICKTYPE_TWISTER    0x36            /* 6 */ /* IP53 & ROUTER */
+#define L1_BRICKTYPE_IX         0x3d            /* = */
+#define L1_BRICKTYPE_IP34       0x61            /* a */
+#define L1_BRICKTYPE_GA		0x62            /* b */
+#define L1_BRICKTYPE_C          0x63            /* c */
+#define L1_BRICKTYPE_OPUS_TIO	0x66		/* f */
+#define L1_BRICKTYPE_I          0x69            /* i */
+#define L1_BRICKTYPE_N          0x6e            /* n */
+#define L1_BRICKTYPE_OPUS       0x6f		/* o */
+#define L1_BRICKTYPE_P          0x70            /* p */
+#define L1_BRICKTYPE_R          0x72            /* r */
+#define L1_BRICKTYPE_CHI_CG     0x76            /* v */
+#define L1_BRICKTYPE_X          0x78            /* x */
+#define L1_BRICKTYPE_X2         0x79            /* y */
+#define L1_BRICKTYPE_SA		0x5e            /* ^ */
+#define L1_BRICKTYPE_PA		0x6a            /* j */
+#define L1_BRICKTYPE_IA		0x6b            /* k */
+#define L1_BRICKTYPE_ATHENA	0x2b            /* + */
+#define L1_BRICKTYPE_DAYTONA	0x7a            /* z */
+#define L1_BRICKTYPE_1932	0x2c		/* . */
+#define L1_BRICKTYPE_191010	0x2e		/* , */
+
+/* board type response codes */
+#define L1_BOARDTYPE_IP69       0x0100          /* CA */
+#define L1_BOARDTYPE_IP63       0x0200          /* CB */
+#define L1_BOARDTYPE_BASEIO     0x0300          /* IB */
+#define L1_BOARDTYPE_PCIE2SLOT  0x0400          /* IC */
+#define L1_BOARDTYPE_PCIX3SLOT  0x0500          /* ID */
+#define L1_BOARDTYPE_PCIXPCIE4SLOT 0x0600       /* IE */
+#define L1_BOARDTYPE_ABACUS     0x0700          /* AB */
+#define L1_BOARDTYPE_DAYTONA    0x0800          /* AD */
+#define L1_BOARDTYPE_INVAL      (-1)            /* invalid brick type */
+
+#endif /* _ASM_IA64_SN_L1_H */
diff --git a/arch/ia64/include/asm/sn/leds.h b/arch/ia64/include/asm/sn/leds.h
new file mode 100644
index 000000000000..66cf8c4d92c9
--- /dev/null
+++ b/arch/ia64/include/asm/sn/leds.h
@@ -0,0 +1,33 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_LEDS_H
+#define _ASM_IA64_SN_LEDS_H
+
+#include <asm/sn/addrs.h>
+#include <asm/sn/pda.h>
+#include <asm/sn/shub_mmr.h>
+
+#define LED0		(LOCAL_MMR_ADDR(SH_REAL_JUNK_BUS_LED0))
+#define LED_CPU_SHIFT	16
+
+#define LED_CPU_HEARTBEAT	0x01
+#define LED_CPU_ACTIVITY	0x02
+#define LED_ALWAYS_SET		0x00
+
+/*
+ * Basic macros for flashing the LEDS on an SGI SN.
+ */
+
+static __inline__ void
+set_led_bits(u8 value, u8 mask)
+{
+	pda->led_state = (pda->led_state & ~mask) | (value & mask);
+	*pda->led_address = (short) pda->led_state;
+}
+
+#endif /* _ASM_IA64_SN_LEDS_H */
+
diff --git a/arch/ia64/include/asm/sn/module.h b/arch/ia64/include/asm/sn/module.h
new file mode 100644
index 000000000000..734e980ece2f
--- /dev/null
+++ b/arch/ia64/include/asm/sn/module.h
@@ -0,0 +1,127 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_MODULE_H
+#define _ASM_IA64_SN_MODULE_H
+
+/* parameter for format_module_id() */
+#define MODULE_FORMAT_BRIEF	1
+#define MODULE_FORMAT_LONG	2
+#define MODULE_FORMAT_LCD	3
+
+/*
+ *	Module id format
+ *
+ *	31-16	Rack ID (encoded class, group, number - 16-bit unsigned int)
+ *	 15-8	Brick type (8-bit ascii character)
+ *	  7-0	Bay (brick position in rack (0-63) - 8-bit unsigned int)
+ *
+ */
+
+/*
+ * Macros for getting the brick type
+ */
+#define MODULE_BTYPE_MASK	0xff00
+#define MODULE_BTYPE_SHFT	8
+#define MODULE_GET_BTYPE(_m)	(((_m) & MODULE_BTYPE_MASK) >> MODULE_BTYPE_SHFT)
+#define MODULE_BT_TO_CHAR(_b)	((char)(_b))
+#define MODULE_GET_BTCHAR(_m)	(MODULE_BT_TO_CHAR(MODULE_GET_BTYPE(_m)))
+
+/*
+ * Macros for getting the rack ID.
+ */
+#define MODULE_RACK_MASK	0xffff0000
+#define MODULE_RACK_SHFT	16
+#define MODULE_GET_RACK(_m)	(((_m) & MODULE_RACK_MASK) >> MODULE_RACK_SHFT)
+
+/*
+ * Macros for getting the brick position
+ */
+#define MODULE_BPOS_MASK	0x00ff
+#define MODULE_BPOS_SHFT	0
+#define MODULE_GET_BPOS(_m)	(((_m) & MODULE_BPOS_MASK) >> MODULE_BPOS_SHFT)
+
+/*
+ * Macros for encoding and decoding rack IDs
+ * A rack number consists of three parts:
+ *   class (0==CPU/mixed, 1==I/O), group, number
+ *
+ * Rack number is stored just as it is displayed on the screen:
+ * a 3-decimal-digit number.
+ */
+#define RACK_CLASS_DVDR         100
+#define RACK_GROUP_DVDR         10
+#define RACK_NUM_DVDR           1
+
+#define RACK_CREATE_RACKID(_c, _g, _n)  ((_c) * RACK_CLASS_DVDR +       \
+        (_g) * RACK_GROUP_DVDR + (_n) * RACK_NUM_DVDR)
+
+#define RACK_GET_CLASS(_r)              ((_r) / RACK_CLASS_DVDR)
+#define RACK_GET_GROUP(_r)              (((_r) - RACK_GET_CLASS(_r) *   \
+            RACK_CLASS_DVDR) / RACK_GROUP_DVDR)
+#define RACK_GET_NUM(_r)                (((_r) - RACK_GET_CLASS(_r) *   \
+            RACK_CLASS_DVDR - RACK_GET_GROUP(_r) *      \
+            RACK_GROUP_DVDR) / RACK_NUM_DVDR)
+
+/*
+ * Macros for encoding and decoding rack IDs
+ * A rack number consists of three parts:
+ *   class      1 bit, 0==CPU/mixed, 1==I/O
+ *   group      2 bits for CPU/mixed, 3 bits for I/O
+ *   number     3 bits for CPU/mixed, 2 bits for I/O (1 based)
+ */
+#define RACK_GROUP_BITS(_r)     (RACK_GET_CLASS(_r) ? 3 : 2)
+#define RACK_NUM_BITS(_r)       (RACK_GET_CLASS(_r) ? 2 : 3)
+
+#define RACK_CLASS_MASK(_r)     0x20
+#define RACK_CLASS_SHFT(_r)     5
+#define RACK_ADD_CLASS(_r, _c)  \
+        ((_r) |= (_c) << RACK_CLASS_SHFT(_r) & RACK_CLASS_MASK(_r))
+
+#define RACK_GROUP_SHFT(_r)     RACK_NUM_BITS(_r)
+#define RACK_GROUP_MASK(_r)     \
+        ( (((unsigned)1<<RACK_GROUP_BITS(_r)) - 1) << RACK_GROUP_SHFT(_r) )
+#define RACK_ADD_GROUP(_r, _g)  \
+        ((_r) |= (_g) << RACK_GROUP_SHFT(_r) & RACK_GROUP_MASK(_r))
+
+#define RACK_NUM_SHFT(_r)       0
+#define RACK_NUM_MASK(_r)       \
+        ( (((unsigned)1<<RACK_NUM_BITS(_r)) - 1) << RACK_NUM_SHFT(_r) )
+#define RACK_ADD_NUM(_r, _n)    \
+        ((_r) |= ((_n) - 1) << RACK_NUM_SHFT(_r) & RACK_NUM_MASK(_r))
+
+
+/*
+ * Brick type definitions
+ */
+#define MAX_BRICK_TYPES         256 /* brick type is stored as uchar */
+
+extern char brick_types[];
+
+#define MODULE_CBRICK           0
+#define MODULE_RBRICK           1
+#define MODULE_IBRICK           2
+#define MODULE_KBRICK           3
+#define MODULE_XBRICK           4
+#define MODULE_DBRICK           5
+#define MODULE_PBRICK           6
+#define MODULE_NBRICK           7
+#define MODULE_PEBRICK          8
+#define MODULE_PXBRICK          9
+#define MODULE_IXBRICK          10
+#define MODULE_CGBRICK		11
+#define MODULE_OPUSBRICK        12
+#define MODULE_SABRICK		13	/* TIO BringUp Brick */
+#define MODULE_IABRICK		14
+#define MODULE_PABRICK		15
+#define MODULE_GABRICK		16
+#define MODULE_OPUS_TIO		17	/* OPUS TIO Riser */
+
+extern char brick_types[];
+extern void format_module_id(char *, moduleid_t, int);
+
+#endif /* _ASM_IA64_SN_MODULE_H */
diff --git a/arch/ia64/include/asm/sn/mspec.h b/arch/ia64/include/asm/sn/mspec.h
new file mode 100644
index 000000000000..c1d3c50c3223
--- /dev/null
+++ b/arch/ia64/include/asm/sn/mspec.h
@@ -0,0 +1,59 @@
+/*
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2001-2008 Silicon Graphics, Inc.  All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_MSPEC_H
+#define _ASM_IA64_SN_MSPEC_H
+
+#define FETCHOP_VAR_SIZE 64 /* 64 byte per fetchop variable */
+
+#define FETCHOP_LOAD		0
+#define FETCHOP_INCREMENT	8
+#define FETCHOP_DECREMENT	16
+#define FETCHOP_CLEAR		24
+
+#define FETCHOP_STORE		0
+#define FETCHOP_AND		24
+#define FETCHOP_OR		32
+
+#define FETCHOP_CLEAR_CACHE	56
+
+#define FETCHOP_LOAD_OP(addr, op) ( \
+         *(volatile long *)((char*) (addr) + (op)))
+
+#define FETCHOP_STORE_OP(addr, op, x) ( \
+         *(volatile long *)((char*) (addr) + (op)) = (long) (x))
+
+#ifdef __KERNEL__
+
+/*
+ * Each Atomic Memory Operation (amo, formerly known as fetchop)
+ * variable is 64 bytes long.  The first 8 bytes are used.  The
+ * remaining 56 bytes are unaddressable due to the operation taking
+ * that portion of the address.
+ *
+ * NOTE: The amo structure _MUST_ be placed in either the first or second
+ * half of the cache line.  The cache line _MUST NOT_ be used for anything
+ * other than additional amo entries.  This is because there are two
+ * addresses which reference the same physical cache line.  One will
+ * be a cached entry with the memory type bits all set.  This address
+ * may be loaded into processor cache.  The amo will be referenced
+ * uncached via the memory special memory type.  If any portion of the
+ * cached cache-line is modified, when that line is flushed, it will
+ * overwrite the uncached value in physical memory and lead to
+ * inconsistency.
+ */
+struct amo {
+        u64 variable;
+        u64 unused[7];
+};
+
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_SN_MSPEC_H */
diff --git a/arch/ia64/include/asm/sn/nodepda.h b/arch/ia64/include/asm/sn/nodepda.h
new file mode 100644
index 000000000000..ee118b901de4
--- /dev/null
+++ b/arch/ia64/include/asm/sn/nodepda.h
@@ -0,0 +1,82 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_NODEPDA_H
+#define _ASM_IA64_SN_NODEPDA_H
+
+
+#include <asm/irq.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/intr.h>
+#include <asm/sn/bte.h>
+
+/*
+ * NUMA Node-Specific Data structures are defined in this file.
+ * In particular, this is the location of the node PDA.
+ * A pointer to the right node PDA is saved in each CPU PDA.
+ */
+
+/*
+ * Node-specific data structure.
+ *
+ * One of these structures is allocated on each node of a NUMA system.
+ *
+ * This structure provides a convenient way of keeping together 
+ * all per-node data structures. 
+ */
+struct phys_cpuid {
+	short			nasid;
+	char			subnode;
+	char			slice;
+};
+
+struct nodepda_s {
+	void 		*pdinfo;	/* Platform-dependent per-node info */
+
+	/*
+	 * The BTEs on this node are shared by the local cpus
+	 */
+	struct bteinfo_s	bte_if[MAX_BTES_PER_NODE];	/* Virtual Interface */
+	struct timer_list	bte_recovery_timer;
+	spinlock_t		bte_recovery_lock;
+
+	/* 
+	 * Array of pointers to the nodepdas for each node.
+	 */
+	struct nodepda_s	*pernode_pdaindr[MAX_COMPACT_NODES]; 
+
+	/*
+	 * Array of physical cpu identifiers. Indexed by cpuid.
+	 */
+	struct phys_cpuid	phys_cpuid[NR_CPUS];
+	spinlock_t		ptc_lock ____cacheline_aligned_in_smp;
+};
+
+typedef struct nodepda_s nodepda_t;
+
+/*
+ * Access Functions for node PDA.
+ * Since there is one nodepda for each node, we need a convenient mechanism
+ * to access these nodepdas without cluttering code with #ifdefs.
+ * The next set of definitions provides this.
+ * Routines are expected to use 
+ *
+ *	sn_nodepda   - to access node PDA for the node on which code is running
+ *	NODEPDA(cnodeid)   - to access node PDA for cnodeid
+ */
+
+DECLARE_PER_CPU(struct nodepda_s *, __sn_nodepda);
+#define sn_nodepda		(__get_cpu_var(__sn_nodepda))
+#define	NODEPDA(cnodeid)	(sn_nodepda->pernode_pdaindr[cnodeid])
+
+/*
+ * Check if given a compact node id the corresponding node has all the
+ * cpus disabled. 
+ */
+#define is_headless_node(cnodeid)	(nr_cpus_node(cnodeid) == 0)
+
+#endif /* _ASM_IA64_SN_NODEPDA_H */
diff --git a/arch/ia64/include/asm/sn/pcibr_provider.h b/arch/ia64/include/asm/sn/pcibr_provider.h
new file mode 100644
index 000000000000..da205b7cdaac
--- /dev/null
+++ b/arch/ia64/include/asm/sn/pcibr_provider.h
@@ -0,0 +1,150 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992-1997,2000-2006 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H
+#define _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H
+
+#include <asm/sn/intr.h>
+#include <asm/sn/pcibus_provider_defs.h>
+
+/* Workarounds */
+#define PV907516 (1 << 1) /* TIOCP: Don't write the write buffer flush reg */
+
+#define BUSTYPE_MASK                    0x1
+
+/* Macros given a pcibus structure */
+#define IS_PCIX(ps)     ((ps)->pbi_bridge_mode & BUSTYPE_MASK)
+#define IS_PCI_BRIDGE_ASIC(asic) (asic == PCIIO_ASIC_TYPE_PIC || \
+                asic == PCIIO_ASIC_TYPE_TIOCP)
+#define IS_PIC_SOFT(ps)     (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_PIC)
+#define IS_TIOCP_SOFT(ps)   (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_TIOCP)
+
+
+/*
+ * The different PCI Bridge types supported on the SGI Altix platforms
+ */
+#define PCIBR_BRIDGETYPE_UNKNOWN       -1
+#define PCIBR_BRIDGETYPE_PIC            2
+#define PCIBR_BRIDGETYPE_TIOCP          3
+
+/*
+ * Bridge 64bit Direct Map Attributes
+ */
+#define PCI64_ATTR_PREF                 (1ull << 59)
+#define PCI64_ATTR_PREC                 (1ull << 58)
+#define PCI64_ATTR_VIRTUAL              (1ull << 57)
+#define PCI64_ATTR_BAR                  (1ull << 56)
+#define PCI64_ATTR_SWAP                 (1ull << 55)
+#define PCI64_ATTR_VIRTUAL1             (1ull << 54)
+
+#define PCI32_LOCAL_BASE                0
+#define PCI32_MAPPED_BASE               0x40000000
+#define PCI32_DIRECT_BASE               0x80000000
+
+#define IS_PCI32_MAPPED(x)              ((u64)(x) < PCI32_DIRECT_BASE && \
+                                         (u64)(x) >= PCI32_MAPPED_BASE)
+#define IS_PCI32_DIRECT(x)              ((u64)(x) >= PCI32_MAPPED_BASE)
+
+
+/*
+ * Bridge PMU Address Transaltion Entry Attibutes
+ */
+#define PCI32_ATE_V                     (0x1 << 0)
+#define PCI32_ATE_CO                    (0x1 << 1)	/* PIC ASIC ONLY */
+#define PCI32_ATE_PIO                   (0x1 << 1)	/* TIOCP ASIC ONLY */
+#define PCI32_ATE_MSI                   (0x1 << 2)
+#define PCI32_ATE_PREF                  (0x1 << 3)
+#define PCI32_ATE_BAR                   (0x1 << 4)
+#define PCI32_ATE_ADDR_SHFT             12
+
+#define MINIMAL_ATES_REQUIRED(addr, size) \
+	(IOPG(IOPGOFF(addr) + (size) - 1) == IOPG((size) - 1))
+
+#define MINIMAL_ATE_FLAG(addr, size) \
+	(MINIMAL_ATES_REQUIRED((u64)addr, size) ? 1 : 0)
+
+/* bit 29 of the pci address is the SWAP bit */
+#define ATE_SWAPSHIFT                   29
+#define ATE_SWAP_ON(x)                  ((x) |= (1 << ATE_SWAPSHIFT))
+#define ATE_SWAP_OFF(x)                 ((x) &= ~(1 << ATE_SWAPSHIFT))
+
+/*
+ * I/O page size
+ */
+#if PAGE_SIZE < 16384
+#define IOPFNSHIFT                      12      /* 4K per mapped page */
+#else
+#define IOPFNSHIFT                      14      /* 16K per mapped page */
+#endif
+
+#define IOPGSIZE                        (1 << IOPFNSHIFT)
+#define IOPG(x)                         ((x) >> IOPFNSHIFT)
+#define IOPGOFF(x)                      ((x) & (IOPGSIZE-1))
+
+#define PCIBR_DEV_SWAP_DIR              (1ull << 19)
+#define PCIBR_CTRL_PAGE_SIZE            (0x1 << 21)
+
+/*
+ * PMU resources.
+ */
+struct ate_resource{
+	u64 *ate;
+	u64 num_ate;
+	u64 lowest_free_index;
+};
+
+struct pcibus_info {
+	struct pcibus_bussoft	pbi_buscommon;   /* common header */
+	u32                pbi_moduleid;
+	short                   pbi_bridge_type;
+	short                   pbi_bridge_mode;
+
+	struct ate_resource     pbi_int_ate_resource;
+	u64                pbi_int_ate_size;
+
+	u64                pbi_dir_xbase;
+	char                    pbi_hub_xid;
+
+	u64                pbi_devreg[8];
+
+	u32		pbi_valid_devices;
+	u32		pbi_enabled_devices;
+
+	spinlock_t              pbi_lock;
+};
+
+extern int  pcibr_init_provider(void);
+extern void *pcibr_bus_fixup(struct pcibus_bussoft *, struct pci_controller *);
+extern dma_addr_t pcibr_dma_map(struct pci_dev *, unsigned long, size_t, int type);
+extern dma_addr_t pcibr_dma_map_consistent(struct pci_dev *, unsigned long, size_t, int type);
+extern void pcibr_dma_unmap(struct pci_dev *, dma_addr_t, int);
+
+/*
+ * prototypes for the bridge asic register access routines in pcibr_reg.c
+ */
+extern void             pcireg_control_bit_clr(struct pcibus_info *, u64);
+extern void             pcireg_control_bit_set(struct pcibus_info *, u64);
+extern u64         pcireg_tflush_get(struct pcibus_info *);
+extern u64         pcireg_intr_status_get(struct pcibus_info *);
+extern void             pcireg_intr_enable_bit_clr(struct pcibus_info *, u64);
+extern void             pcireg_intr_enable_bit_set(struct pcibus_info *, u64);
+extern void             pcireg_intr_addr_addr_set(struct pcibus_info *, int, u64);
+extern void             pcireg_force_intr_set(struct pcibus_info *, int);
+extern u64         pcireg_wrb_flush_get(struct pcibus_info *, int);
+extern void             pcireg_int_ate_set(struct pcibus_info *, int, u64);
+extern u64 __iomem *	pcireg_int_ate_addr(struct pcibus_info *, int);
+extern void 		pcibr_force_interrupt(struct sn_irq_info *sn_irq_info);
+extern void 		pcibr_change_devices_irq(struct sn_irq_info *sn_irq_info);
+extern int 		pcibr_ate_alloc(struct pcibus_info *, int);
+extern void 		pcibr_ate_free(struct pcibus_info *, int);
+extern void 		ate_write(struct pcibus_info *, int, int, u64);
+extern int sal_pcibr_slot_enable(struct pcibus_info *soft, int device,
+				 void *resp, char **ssdt);
+extern int sal_pcibr_slot_disable(struct pcibus_info *soft, int device,
+				  int action, void *resp);
+extern u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus);
+#endif
diff --git a/arch/ia64/include/asm/sn/pcibus_provider_defs.h b/arch/ia64/include/asm/sn/pcibus_provider_defs.h
new file mode 100644
index 000000000000..8f7c83d0f6d3
--- /dev/null
+++ b/arch/ia64/include/asm/sn/pcibus_provider_defs.h
@@ -0,0 +1,68 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H
+#define _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H
+
+/*
+ * SN pci asic types.  Do not ever renumber these or reuse values.  The
+ * values must agree with what prom thinks they are.
+ */
+
+#define PCIIO_ASIC_TYPE_UNKNOWN	0
+#define PCIIO_ASIC_TYPE_PPB	1
+#define PCIIO_ASIC_TYPE_PIC	2
+#define PCIIO_ASIC_TYPE_TIOCP	3
+#define PCIIO_ASIC_TYPE_TIOCA	4
+#define PCIIO_ASIC_TYPE_TIOCE	5
+
+#define PCIIO_ASIC_MAX_TYPES	6
+
+/*
+ * Common pciio bus provider data.  There should be one of these as the
+ * first field in any pciio based provider soft structure (e.g. pcibr_soft
+ * tioca_soft, etc).
+ */
+
+struct pcibus_bussoft {
+	u32		bs_asic_type;	/* chipset type */
+	u32		bs_xid;		/* xwidget id */
+	u32		bs_persist_busnum; /* Persistent Bus Number */
+	u32		bs_persist_segment; /* Segment Number */
+	u64		bs_legacy_io;	/* legacy io pio addr */
+	u64		bs_legacy_mem;	/* legacy mem pio addr */
+	u64		bs_base;	/* widget base */
+	struct xwidget_info	*bs_xwidget_info;
+};
+
+struct pci_controller;
+/*
+ * SN pci bus indirection
+ */
+
+struct sn_pcibus_provider {
+	dma_addr_t	(*dma_map)(struct pci_dev *, unsigned long, size_t, int flags);
+	dma_addr_t	(*dma_map_consistent)(struct pci_dev *, unsigned long, size_t, int flags);
+	void		(*dma_unmap)(struct pci_dev *, dma_addr_t, int);
+	void *		(*bus_fixup)(struct pcibus_bussoft *, struct pci_controller *);
+ 	void		(*force_interrupt)(struct sn_irq_info *);
+ 	void		(*target_interrupt)(struct sn_irq_info *);
+};
+
+/*
+ * Flags used by the map interfaces
+ * bits 3:0 specifies format of passed in address
+ * bit  4   specifies that address is to be used for MSI
+ */
+
+#define SN_DMA_ADDRTYPE(x)	((x) & 0xf)
+#define     SN_DMA_ADDR_PHYS	1	/* address is an xio address. */
+#define     SN_DMA_ADDR_XIO	2	/* address is phys memory */
+#define SN_DMA_MSI		0x10	/* Bus address is to be used for MSI */
+
+extern struct sn_pcibus_provider *sn_pci_provider[];
+#endif				/* _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H */
diff --git a/arch/ia64/include/asm/sn/pcidev.h b/arch/ia64/include/asm/sn/pcidev.h
new file mode 100644
index 000000000000..1c2382cea807
--- /dev/null
+++ b/arch/ia64/include/asm/sn/pcidev.h
@@ -0,0 +1,85 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_PCI_PCIDEV_H
+#define _ASM_IA64_SN_PCI_PCIDEV_H
+
+#include <linux/pci.h>
+
+/*
+ * In ia64, pci_dev->sysdata must be a *pci_controller. To provide access to
+ * the pcidev_info structs for all devices under a controller, we keep a
+ * list of pcidev_info under pci_controller->platform_data.
+ */
+struct sn_platform_data {
+	void *provider_soft;
+	struct list_head pcidev_info;
+};
+
+#define SN_PLATFORM_DATA(busdev) \
+	((struct sn_platform_data *)(PCI_CONTROLLER(busdev)->platform_data))
+
+#define SN_PCIDEV_INFO(dev)	sn_pcidev_info_get(dev)
+
+/*
+ * Given a pci_bus, return the sn pcibus_bussoft struct.  Note that
+ * this only works for root busses, not for busses represented by PPB's.
+ */
+
+#define SN_PCIBUS_BUSSOFT(pci_bus) \
+	((struct pcibus_bussoft *)(SN_PLATFORM_DATA(pci_bus)->provider_soft))
+
+#define SN_PCIBUS_BUSSOFT_INFO(pci_bus) \
+	((struct pcibus_info *)(SN_PLATFORM_DATA(pci_bus)->provider_soft))
+/*
+ * Given a struct pci_dev, return the sn pcibus_bussoft struct.  Note
+ * that this is not equivalent to SN_PCIBUS_BUSSOFT(pci_dev->bus) due
+ * due to possible PPB's in the path.
+ */
+
+#define SN_PCIDEV_BUSSOFT(pci_dev) \
+	(SN_PCIDEV_INFO(pci_dev)->pdi_host_pcidev_info->pdi_pcibus_info)
+
+#define SN_PCIDEV_BUSPROVIDER(pci_dev) \
+	(SN_PCIDEV_INFO(pci_dev)->pdi_provider)
+
+#define PCIIO_BUS_NONE	255      /* bus 255 reserved */
+#define PCIIO_SLOT_NONE 255
+#define PCIIO_FUNC_NONE 255
+#define PCIIO_VENDOR_ID_NONE	(-1)
+
+struct pcidev_info {
+	u64		pdi_pio_mapped_addr[7]; /* 6 BARs PLUS 1 ROM */
+	u64		pdi_slot_host_handle;	/* Bus and devfn Host pci_dev */
+
+	struct pcibus_bussoft	*pdi_pcibus_info;	/* Kernel common bus soft */
+	struct pcidev_info	*pdi_host_pcidev_info;	/* Kernel Host pci_dev */
+	struct pci_dev		*pdi_linux_pcidev;	/* Kernel pci_dev */
+
+	struct sn_irq_info	*pdi_sn_irq_info;
+	struct sn_pcibus_provider *pdi_provider;	/* sn pci ops */
+	struct pci_dev 		*host_pci_dev;		/* host bus link */
+	struct list_head	pdi_list;		/* List of pcidev_info */
+};
+
+extern void sn_irq_fixup(struct pci_dev *pci_dev,
+			 struct sn_irq_info *sn_irq_info);
+extern void sn_irq_unfixup(struct pci_dev *pci_dev);
+extern struct pcidev_info * sn_pcidev_info_get(struct pci_dev *);
+extern void sn_bus_fixup(struct pci_bus *);
+extern void sn_acpi_bus_fixup(struct pci_bus *);
+extern void sn_common_bus_fixup(struct pci_bus *, struct pcibus_bussoft *);
+extern void sn_bus_store_sysdata(struct pci_dev *dev);
+extern void sn_bus_free_sysdata(void);
+extern void sn_generate_path(struct pci_bus *pci_bus, char *address);
+extern void sn_io_slot_fixup(struct pci_dev *);
+extern void sn_acpi_slot_fixup(struct pci_dev *);
+extern void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *,
+			      struct sn_irq_info *);
+extern void sn_pci_unfixup_slot(struct pci_dev *dev);
+extern void sn_irq_lh_init(void);
+#endif				/* _ASM_IA64_SN_PCI_PCIDEV_H */
diff --git a/arch/ia64/include/asm/sn/pda.h b/arch/ia64/include/asm/sn/pda.h
new file mode 100644
index 000000000000..1c5108d44d8b
--- /dev/null
+++ b/arch/ia64/include/asm/sn/pda.h
@@ -0,0 +1,69 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_PDA_H
+#define _ASM_IA64_SN_PDA_H
+
+#include <linux/cache.h>
+#include <asm/percpu.h>
+#include <asm/system.h>
+
+
+/*
+ * CPU-specific data structure.
+ *
+ * One of these structures is allocated for each cpu of a NUMA system.
+ *
+ * This structure provides a convenient way of keeping together 
+ * all SN per-cpu data structures. 
+ */
+
+typedef struct pda_s {
+
+	/*
+	 * Support for SN LEDs
+	 */
+	volatile short	*led_address;
+	u8		led_state;
+	u8		hb_state;	/* supports blinking heartbeat leds */
+	unsigned int	hb_count;
+
+	unsigned int	idle_flag;
+	
+	volatile unsigned long *bedrock_rev_id;
+	volatile unsigned long *pio_write_status_addr;
+	unsigned long pio_write_status_val;
+	volatile unsigned long *pio_shub_war_cam_addr;
+
+	unsigned long	sn_in_service_ivecs[4];
+	int		sn_lb_int_war_ticks;
+	int		sn_last_irq;
+	int		sn_first_irq;
+} pda_t;
+
+
+#define CACHE_ALIGN(x)	(((x) + SMP_CACHE_BYTES-1) & ~(SMP_CACHE_BYTES-1))
+
+/*
+ * PDA
+ * Per-cpu private data area for each cpu. The PDA is located immediately after
+ * the IA64 cpu_data area. A full page is allocated for the cp_data area for each
+ * cpu but only a small amout of the page is actually used. We put the SNIA PDA
+ * in the same page as the cpu_data area. Note that there is a check in the setup
+ * code to verify that we don't overflow the page.
+ *
+ * Seems like we should should cache-line align the pda so that any changes in the
+ * size of the cpu_data area don't change cache layout. Should we align to 32, 64, 128
+ * or 512 boundary. Each has merits. For now, pick 128 but should be revisited later.
+ */
+DECLARE_PER_CPU(struct pda_s, pda_percpu);
+
+#define pda		(&__ia64_per_cpu_var(pda_percpu))
+
+#define pdacpu(cpu)	(&per_cpu(pda_percpu, cpu))
+
+#endif /* _ASM_IA64_SN_PDA_H */
diff --git a/arch/ia64/include/asm/sn/pic.h b/arch/ia64/include/asm/sn/pic.h
new file mode 100644
index 000000000000..5f9da5fd6e56
--- /dev/null
+++ b/arch/ia64/include/asm/sn/pic.h
@@ -0,0 +1,261 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2003 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_PCI_PIC_H
+#define _ASM_IA64_SN_PCI_PIC_H
+
+/*
+ * PIC AS DEVICE ZERO
+ * ------------------
+ *
+ * PIC handles PCI/X busses.  PCI/X requires that the 'bridge' (i.e. PIC)
+ * be designated as 'device 0'.   That is a departure from earlier SGI
+ * PCI bridges.  Because of that we use config space 1 to access the
+ * config space of the first actual PCI device on the bus.
+ * Here's what the PIC manual says:
+ *
+ *     The current PCI-X bus specification now defines that the parent
+ *     hosts bus bridge (PIC for example) must be device 0 on bus 0. PIC
+ *     reduced the total number of devices from 8 to 4 and removed the
+ *     device registers and windows, now only supporting devices 0,1,2, and
+ *     3. PIC did leave all 8 configuration space windows. The reason was
+ *     there was nothing to gain by removing them. Here in lies the problem.
+ *     The device numbering we do using 0 through 3 is unrelated to the device
+ *     numbering which PCI-X requires in configuration space. In the past we
+ *     correlated Configs pace and our device space 0 <-> 0, 1 <-> 1, etc.
+ *     PCI-X requires we start a 1, not 0 and currently the PX brick
+ *     does associate our:
+ *
+ *         device 0 with configuration space window 1,
+ *         device 1 with configuration space window 2,
+ *         device 2 with configuration space window 3,
+ *         device 3 with configuration space window 4.
+ *
+ * The net effect is that all config space access are off-by-one with
+ * relation to other per-slot accesses on the PIC.
+ * Here is a table that shows some of that:
+ *
+ *                               Internal Slot#
+ *           |
+ *           |     0         1        2         3
+ * ----------|---------------------------------------
+ * config    |  0x21000   0x22000  0x23000   0x24000
+ *           |
+ * even rrb  |  0[0]      n/a      1[0]      n/a	[] == implied even/odd
+ *           |
+ * odd rrb   |  n/a       0[1]     n/a       1[1]
+ *           |
+ * int dev   |  00       01        10        11
+ *           |
+ * ext slot# |  1        2         3         4
+ * ----------|---------------------------------------
+ */
+
+#define PIC_ATE_TARGETID_SHFT           8
+#define PIC_HOST_INTR_ADDR              0x0000FFFFFFFFFFFFUL
+#define PIC_PCI64_ATTR_TARG_SHFT        60
+
+
+/*****************************************************************************
+ *********************** PIC MMR structure mapping ***************************
+ *****************************************************************************/
+
+/* NOTE: PIC WAR. PV#854697.  PIC does not allow writes just to [31:0]
+ * of a 64-bit register.  When writing PIC registers, always write the
+ * entire 64 bits.
+ */
+
+struct pic {
+
+    /* 0x000000-0x00FFFF -- Local Registers */
+
+    /* 0x000000-0x000057 -- Standard Widget Configuration */
+    u64		p_wid_id;			/* 0x000000 */
+    u64		p_wid_stat;			/* 0x000008 */
+    u64		p_wid_err_upper;		/* 0x000010 */
+    u64		p_wid_err_lower;		/* 0x000018 */
+    #define p_wid_err p_wid_err_lower
+    u64		p_wid_control;			/* 0x000020 */
+    u64		p_wid_req_timeout;		/* 0x000028 */
+    u64		p_wid_int_upper;		/* 0x000030 */
+    u64		p_wid_int_lower;		/* 0x000038 */
+    #define p_wid_int p_wid_int_lower
+    u64		p_wid_err_cmdword;		/* 0x000040 */
+    u64		p_wid_llp;			/* 0x000048 */
+    u64		p_wid_tflush;			/* 0x000050 */
+
+    /* 0x000058-0x00007F -- Bridge-specific Widget Configuration */
+    u64		p_wid_aux_err;			/* 0x000058 */
+    u64		p_wid_resp_upper;		/* 0x000060 */
+    u64		p_wid_resp_lower;		/* 0x000068 */
+    #define p_wid_resp p_wid_resp_lower
+    u64		p_wid_tst_pin_ctrl;		/* 0x000070 */
+    u64		p_wid_addr_lkerr;		/* 0x000078 */
+
+    /* 0x000080-0x00008F -- PMU & MAP */
+    u64		p_dir_map;			/* 0x000080 */
+    u64		_pad_000088;			/* 0x000088 */
+
+    /* 0x000090-0x00009F -- SSRAM */
+    u64		p_map_fault;			/* 0x000090 */
+    u64		_pad_000098;			/* 0x000098 */
+
+    /* 0x0000A0-0x0000AF -- Arbitration */
+    u64		p_arb;				/* 0x0000A0 */
+    u64		_pad_0000A8;			/* 0x0000A8 */
+
+    /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */
+    u64		p_ate_parity_err;		/* 0x0000B0 */
+    u64		_pad_0000B8;			/* 0x0000B8 */
+
+    /* 0x0000C0-0x0000FF -- PCI/GIO */
+    u64		p_bus_timeout;			/* 0x0000C0 */
+    u64		p_pci_cfg;			/* 0x0000C8 */
+    u64		p_pci_err_upper;		/* 0x0000D0 */
+    u64		p_pci_err_lower;		/* 0x0000D8 */
+    #define p_pci_err p_pci_err_lower
+    u64		_pad_0000E0[4];			/* 0x0000{E0..F8} */
+
+    /* 0x000100-0x0001FF -- Interrupt */
+    u64		p_int_status;			/* 0x000100 */
+    u64		p_int_enable;			/* 0x000108 */
+    u64		p_int_rst_stat;			/* 0x000110 */
+    u64		p_int_mode;			/* 0x000118 */
+    u64		p_int_device;			/* 0x000120 */
+    u64		p_int_host_err;			/* 0x000128 */
+    u64		p_int_addr[8];			/* 0x0001{30,,,68} */
+    u64		p_err_int_view;			/* 0x000170 */
+    u64		p_mult_int;			/* 0x000178 */
+    u64		p_force_always[8];		/* 0x0001{80,,,B8} */
+    u64		p_force_pin[8];			/* 0x0001{C0,,,F8} */
+
+    /* 0x000200-0x000298 -- Device */
+    u64		p_device[4];			/* 0x0002{00,,,18} */
+    u64		_pad_000220[4];			/* 0x0002{20,,,38} */
+    u64		p_wr_req_buf[4];		/* 0x0002{40,,,58} */
+    u64		_pad_000260[4];			/* 0x0002{60,,,78} */
+    u64		p_rrb_map[2];			/* 0x0002{80,,,88} */
+    #define p_even_resp p_rrb_map[0]			/* 0x000280 */
+    #define p_odd_resp  p_rrb_map[1]			/* 0x000288 */
+    u64		p_resp_status;			/* 0x000290 */
+    u64		p_resp_clear;			/* 0x000298 */
+
+    u64		_pad_0002A0[12];		/* 0x0002{A0..F8} */
+
+    /* 0x000300-0x0003F8 -- Buffer Address Match Registers */
+    struct {
+	u64	upper;				/* 0x0003{00,,,F0} */
+	u64	lower;				/* 0x0003{08,,,F8} */
+    } p_buf_addr_match[16];
+
+    /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */
+    struct {
+	u64	flush_w_touch;			/* 0x000{400,,,5C0} */
+	u64	flush_wo_touch;			/* 0x000{408,,,5C8} */
+	u64	inflight;			/* 0x000{410,,,5D0} */
+	u64	prefetch;			/* 0x000{418,,,5D8} */
+	u64	total_pci_retry;		/* 0x000{420,,,5E0} */
+	u64	max_pci_retry;			/* 0x000{428,,,5E8} */
+	u64	max_latency;			/* 0x000{430,,,5F0} */
+	u64	clear_all;			/* 0x000{438,,,5F8} */
+    } p_buf_count[8];
+
+
+    /* 0x000600-0x0009FF -- PCI/X registers */
+    u64		p_pcix_bus_err_addr;		/* 0x000600 */
+    u64		p_pcix_bus_err_attr;		/* 0x000608 */
+    u64		p_pcix_bus_err_data;		/* 0x000610 */
+    u64		p_pcix_pio_split_addr;		/* 0x000618 */
+    u64		p_pcix_pio_split_attr;		/* 0x000620 */
+    u64		p_pcix_dma_req_err_attr;	/* 0x000628 */
+    u64		p_pcix_dma_req_err_addr;	/* 0x000630 */
+    u64		p_pcix_timeout;			/* 0x000638 */
+
+    u64		_pad_000640[120];		/* 0x000{640,,,9F8} */
+
+    /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */
+    struct {
+	u64	p_buf_addr;			/* 0x000{A00,,,AF0} */
+	u64	p_buf_attr;			/* 0X000{A08,,,AF8} */
+    } p_pcix_read_buf_64[16];
+
+    struct {
+	u64	p_buf_addr;			/* 0x000{B00,,,BE0} */
+	u64	p_buf_attr;			/* 0x000{B08,,,BE8} */
+	u64	p_buf_valid;			/* 0x000{B10,,,BF0} */
+	u64	__pad1;				/* 0x000{B18,,,BF8} */
+    } p_pcix_write_buf_64[8];
+
+    /* End of Local Registers -- Start of Address Map space */
+
+    char		_pad_000c00[0x010000 - 0x000c00];
+
+    /* 0x010000-0x011fff -- Internal ATE RAM (Auto Parity Generation) */
+    u64		p_int_ate_ram[1024];		/* 0x010000-0x011fff */
+
+    /* 0x012000-0x013fff -- Internal ATE RAM (Manual Parity Generation) */
+    u64		p_int_ate_ram_mp[1024];		/* 0x012000-0x013fff */
+
+    char		_pad_014000[0x18000 - 0x014000];
+
+    /* 0x18000-0x197F8 -- PIC Write Request Ram */
+    u64		p_wr_req_lower[256];		/* 0x18000 - 0x187F8 */
+    u64		p_wr_req_upper[256];		/* 0x18800 - 0x18FF8 */
+    u64		p_wr_req_parity[256];		/* 0x19000 - 0x197F8 */
+
+    char		_pad_019800[0x20000 - 0x019800];
+
+    /* 0x020000-0x027FFF -- PCI Device Configuration Spaces */
+    union {
+	u8		c[0x1000 / 1];			/* 0x02{0000,,,7FFF} */
+	u16	s[0x1000 / 2];			/* 0x02{0000,,,7FFF} */
+	u32	l[0x1000 / 4];			/* 0x02{0000,,,7FFF} */
+	u64	d[0x1000 / 8];			/* 0x02{0000,,,7FFF} */
+	union {
+	    u8	c[0x100 / 1];
+	    u16	s[0x100 / 2];
+	    u32	l[0x100 / 4];
+	    u64	d[0x100 / 8];
+	} f[8];
+    } p_type0_cfg_dev[8];				/* 0x02{0000,,,7FFF} */
+
+    /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */
+    union {
+	u8		c[0x1000 / 1];			/* 0x028000-0x029000 */
+	u16	s[0x1000 / 2];			/* 0x028000-0x029000 */
+	u32	l[0x1000 / 4];			/* 0x028000-0x029000 */
+	u64	d[0x1000 / 8];			/* 0x028000-0x029000 */
+	union {
+	    u8	c[0x100 / 1];
+	    u16	s[0x100 / 2];
+	    u32	l[0x100 / 4];
+	    u64	d[0x100 / 8];
+	} f[8];
+    } p_type1_cfg;					/* 0x028000-0x029000 */
+
+    char		_pad_029000[0x030000-0x029000];
+
+    /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */
+    union {
+	u8		c[8 / 1];
+	u16	s[8 / 2];
+	u32	l[8 / 4];
+	u64	d[8 / 8];
+    } p_pci_iack;					/* 0x030000-0x030007 */
+
+    char		_pad_030007[0x040000-0x030008];
+
+    /* 0x040000-0x030007 -- PCIX Special Cycle */
+    union {
+	u8		c[8 / 1];
+	u16	s[8 / 2];
+	u32	l[8 / 4];
+	u64	d[8 / 8];
+    } p_pcix_cycle;					/* 0x040000-0x040007 */
+};
+
+#endif                          /* _ASM_IA64_SN_PCI_PIC_H */
diff --git a/arch/ia64/include/asm/sn/rw_mmr.h b/arch/ia64/include/asm/sn/rw_mmr.h
new file mode 100644
index 000000000000..2d78f4c5a45e
--- /dev/null
+++ b/arch/ia64/include/asm/sn/rw_mmr.h
@@ -0,0 +1,28 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2002-2006 Silicon Graphics, Inc.  All Rights Reserved.
+ */
+#ifndef _ASM_IA64_SN_RW_MMR_H
+#define _ASM_IA64_SN_RW_MMR_H
+
+
+/*
+ * This file that access MMRs via uncached physical addresses.
+ * 	pio_phys_read_mmr  - read an MMR
+ * 	pio_phys_write_mmr - write an MMR
+ * 	pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0
+ *		Second MMR will be skipped if address is NULL
+ *
+ * Addresses passed to these routines should be uncached physical addresses
+ * ie., 0x80000....
+ */
+
+
+extern long pio_phys_read_mmr(volatile long *mmr); 
+extern void pio_phys_write_mmr(volatile long *mmr, long val);
+extern void pio_atomic_phys_write_mmrs(volatile long *mmr1, long val1, volatile long *mmr2, long val2); 
+
+#endif /* _ASM_IA64_SN_RW_MMR_H */
diff --git a/arch/ia64/include/asm/sn/shub_mmr.h b/arch/ia64/include/asm/sn/shub_mmr.h
new file mode 100644
index 000000000000..7de1d1d4b71a
--- /dev/null
+++ b/arch/ia64/include/asm/sn/shub_mmr.h
@@ -0,0 +1,502 @@
+/*
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2001-2005 Silicon Graphics, Inc.  All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SHUB_MMR_H
+#define _ASM_IA64_SN_SHUB_MMR_H
+
+/* ==================================================================== */
+/*                        Register "SH_IPI_INT"                         */
+/*               SHub Inter-Processor Interrupt Registers               */
+/* ==================================================================== */
+#define SH1_IPI_INT			__IA64_UL_CONST(0x0000000110000380)
+#define SH2_IPI_INT			__IA64_UL_CONST(0x0000000010000380)
+
+/*   SH_IPI_INT_TYPE                                                    */
+/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
+#define SH_IPI_INT_TYPE_SHFT				0
+#define SH_IPI_INT_TYPE_MASK		__IA64_UL_CONST(0x0000000000000007)
+
+/*   SH_IPI_INT_AGT                                                     */
+/*   Description:  Agent, must be 0 for SHub                            */
+#define SH_IPI_INT_AGT_SHFT				3
+#define SH_IPI_INT_AGT_MASK		__IA64_UL_CONST(0x0000000000000008)
+
+/*   SH_IPI_INT_PID                                                     */
+/*   Description:  Processor ID, same setting as on targeted McKinley  */
+#define SH_IPI_INT_PID_SHFT                      	4
+#define SH_IPI_INT_PID_MASK		__IA64_UL_CONST(0x00000000000ffff0)
+
+/*   SH_IPI_INT_BASE                                                    */
+/*   Description:  Optional interrupt vector area, 2MB aligned          */
+#define SH_IPI_INT_BASE_SHFT				21
+#define SH_IPI_INT_BASE_MASK 		__IA64_UL_CONST(0x0003ffffffe00000)
+
+/*   SH_IPI_INT_IDX                                                     */
+/*   Description:  Targeted McKinley interrupt vector                   */
+#define SH_IPI_INT_IDX_SHFT				52
+#define SH_IPI_INT_IDX_MASK		__IA64_UL_CONST(0x0ff0000000000000)
+
+/*   SH_IPI_INT_SEND                                                    */
+/*   Description:  Send Interrupt Message to PI, This generates a puls  */
+#define SH_IPI_INT_SEND_SHFT				63
+#define SH_IPI_INT_SEND_MASK		__IA64_UL_CONST(0x8000000000000000)
+
+/* ==================================================================== */
+/*                     Register "SH_EVENT_OCCURRED"                     */
+/*                    SHub Interrupt Event Occurred                     */
+/* ==================================================================== */
+#define SH1_EVENT_OCCURRED		__IA64_UL_CONST(0x0000000110010000)
+#define SH1_EVENT_OCCURRED_ALIAS	__IA64_UL_CONST(0x0000000110010008)
+#define SH2_EVENT_OCCURRED		__IA64_UL_CONST(0x0000000010010000)
+#define SH2_EVENT_OCCURRED_ALIAS 	__IA64_UL_CONST(0x0000000010010008)
+
+/* ==================================================================== */
+/*                     Register "SH_PI_CAM_CONTROL"                     */
+/*                      CRB CAM MMR Access Control                      */
+/* ==================================================================== */
+#define SH1_PI_CAM_CONTROL		__IA64_UL_CONST(0x0000000120050300)
+
+/* ==================================================================== */
+/*                        Register "SH_SHUB_ID"                         */
+/*                            SHub ID Number                            */
+/* ==================================================================== */
+#define SH1_SHUB_ID			__IA64_UL_CONST(0x0000000110060580)
+#define SH1_SHUB_ID_REVISION_SHFT			28
+#define SH1_SHUB_ID_REVISION_MASK	__IA64_UL_CONST(0x00000000f0000000)
+
+/* ==================================================================== */
+/*                          Register "SH_RTC"                           */
+/*                           Real-time Clock                            */
+/* ==================================================================== */
+#define SH1_RTC				__IA64_UL_CONST(0x00000001101c0000)
+#define SH2_RTC				__IA64_UL_CONST(0x00000002101c0000)
+#define SH_RTC_MASK			__IA64_UL_CONST(0x007fffffffffffff)
+
+/* ==================================================================== */
+/*                   Register "SH_PIO_WRITE_STATUS_0|1"                 */
+/*                      PIO Write Status for CPU 0 & 1                  */
+/* ==================================================================== */
+#define SH1_PIO_WRITE_STATUS_0		__IA64_UL_CONST(0x0000000120070200)
+#define SH1_PIO_WRITE_STATUS_1		__IA64_UL_CONST(0x0000000120070280)
+#define SH2_PIO_WRITE_STATUS_0		__IA64_UL_CONST(0x0000000020070200)
+#define SH2_PIO_WRITE_STATUS_1		__IA64_UL_CONST(0x0000000020070280)
+#define SH2_PIO_WRITE_STATUS_2		__IA64_UL_CONST(0x0000000020070300)
+#define SH2_PIO_WRITE_STATUS_3		__IA64_UL_CONST(0x0000000020070380)
+
+/*   SH_PIO_WRITE_STATUS_0_WRITE_DEADLOCK                               */
+/*   Description:  Deadlock response detected                           */
+#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT		1
+#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK \
+					__IA64_UL_CONST(0x0000000000000002)
+
+/*   SH_PIO_WRITE_STATUS_0_PENDING_WRITE_COUNT                          */
+/*   Description:  Count of currently pending PIO writes                */
+#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT	56
+#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK \
+					__IA64_UL_CONST(0x3f00000000000000)
+
+/* ==================================================================== */
+/*                Register "SH_PIO_WRITE_STATUS_0_ALIAS"                */
+/* ==================================================================== */
+#define SH1_PIO_WRITE_STATUS_0_ALIAS	__IA64_UL_CONST(0x0000000120070208)
+#define SH2_PIO_WRITE_STATUS_0_ALIAS	__IA64_UL_CONST(0x0000000020070208)
+
+/* ==================================================================== */
+/*                     Register "SH_EVENT_OCCURRED"                     */
+/*                    SHub Interrupt Event Occurred                     */
+/* ==================================================================== */
+/*   SH_EVENT_OCCURRED_UART_INT                                         */
+/*   Description:  Pending Junk Bus UART Interrupt                      */
+#define SH_EVENT_OCCURRED_UART_INT_SHFT			20
+#define SH_EVENT_OCCURRED_UART_INT_MASK	__IA64_UL_CONST(0x0000000000100000)
+
+/*   SH_EVENT_OCCURRED_IPI_INT                                          */
+/*   Description:  Pending IPI Interrupt                                */
+#define SH_EVENT_OCCURRED_IPI_INT_SHFT			28
+#define SH_EVENT_OCCURRED_IPI_INT_MASK	__IA64_UL_CONST(0x0000000010000000)
+
+/*   SH_EVENT_OCCURRED_II_INT0                                          */
+/*   Description:  Pending II 0 Interrupt                               */
+#define SH_EVENT_OCCURRED_II_INT0_SHFT			29
+#define SH_EVENT_OCCURRED_II_INT0_MASK	__IA64_UL_CONST(0x0000000020000000)
+
+/*   SH_EVENT_OCCURRED_II_INT1                                          */
+/*   Description:  Pending II 1 Interrupt                               */
+#define SH_EVENT_OCCURRED_II_INT1_SHFT			30
+#define SH_EVENT_OCCURRED_II_INT1_MASK	__IA64_UL_CONST(0x0000000040000000)
+
+/*   SH2_EVENT_OCCURRED_EXTIO_INT2                                      */
+/*   Description:  Pending SHUB 2 EXT IO INT2                           */
+#define SH2_EVENT_OCCURRED_EXTIO_INT2_SHFT		33
+#define SH2_EVENT_OCCURRED_EXTIO_INT2_MASK __IA64_UL_CONST(0x0000000200000000)
+
+/*   SH2_EVENT_OCCURRED_EXTIO_INT3                                      */
+/*   Description:  Pending SHUB 2 EXT IO INT3                           */
+#define SH2_EVENT_OCCURRED_EXTIO_INT3_SHFT		34
+#define SH2_EVENT_OCCURRED_EXTIO_INT3_MASK __IA64_UL_CONST(0x0000000400000000)
+
+#define SH_ALL_INT_MASK \
+	(SH_EVENT_OCCURRED_UART_INT_MASK | SH_EVENT_OCCURRED_IPI_INT_MASK | \
+	 SH_EVENT_OCCURRED_II_INT0_MASK | SH_EVENT_OCCURRED_II_INT1_MASK | \
+	 SH_EVENT_OCCURRED_II_INT1_MASK | SH2_EVENT_OCCURRED_EXTIO_INT2_MASK | \
+	 SH2_EVENT_OCCURRED_EXTIO_INT3_MASK)
+
+
+/* ==================================================================== */
+/*                         LEDS                                         */
+/* ==================================================================== */
+#define SH1_REAL_JUNK_BUS_LED0			0x7fed00000UL
+#define SH1_REAL_JUNK_BUS_LED1			0x7fed10000UL
+#define SH1_REAL_JUNK_BUS_LED2			0x7fed20000UL
+#define SH1_REAL_JUNK_BUS_LED3			0x7fed30000UL
+
+#define SH2_REAL_JUNK_BUS_LED0			0xf0000000UL
+#define SH2_REAL_JUNK_BUS_LED1			0xf0010000UL
+#define SH2_REAL_JUNK_BUS_LED2			0xf0020000UL
+#define SH2_REAL_JUNK_BUS_LED3			0xf0030000UL
+
+/* ==================================================================== */
+/*                         Register "SH1_PTC_0"                         */
+/*       Puge Translation Cache Message Configuration Information       */
+/* ==================================================================== */
+#define SH1_PTC_0			__IA64_UL_CONST(0x00000001101a0000)
+
+/*   SH1_PTC_0_A                                                        */
+/*   Description:  Type                                                 */
+#define SH1_PTC_0_A_SHFT				0
+
+/*   SH1_PTC_0_PS                                                       */
+/*   Description:  Page Size                                            */
+#define SH1_PTC_0_PS_SHFT				2
+
+/*   SH1_PTC_0_RID                                                      */
+/*   Description:  Region ID                                            */
+#define SH1_PTC_0_RID_SHFT				8
+
+/*   SH1_PTC_0_START                                                    */
+/*   Description:  Start                                                */
+#define SH1_PTC_0_START_SHFT				63
+
+/* ==================================================================== */
+/*                         Register "SH1_PTC_1"                         */
+/*       Puge Translation Cache Message Configuration Information       */
+/* ==================================================================== */
+#define SH1_PTC_1			__IA64_UL_CONST(0x00000001101a0080)
+
+/*   SH1_PTC_1_START                                                    */
+/*   Description:  PTC_1 Start                                          */
+#define SH1_PTC_1_START_SHFT				63
+
+/* ==================================================================== */
+/*                         Register "SH2_PTC"                           */
+/*       Puge Translation Cache Message Configuration Information       */
+/* ==================================================================== */
+#define SH2_PTC				__IA64_UL_CONST(0x0000000170000000)
+
+/*   SH2_PTC_A                                                          */
+/*   Description:  Type                                                 */
+#define SH2_PTC_A_SHFT					0
+
+/*   SH2_PTC_PS                                                         */
+/*   Description:  Page Size                                            */
+#define SH2_PTC_PS_SHFT					2
+
+/*   SH2_PTC_RID                                                      */
+/*   Description:  Region ID                                            */
+#define SH2_PTC_RID_SHFT				4
+
+/*   SH2_PTC_START                                                      */
+/*   Description:  Start                                                */
+#define SH2_PTC_START_SHFT				63
+
+/*   SH2_PTC_ADDR_RID                                                   */
+/*   Description:  Region ID                                            */
+#define SH2_PTC_ADDR_SHFT				4
+#define SH2_PTC_ADDR_MASK		__IA64_UL_CONST(0x1ffffffffffff000)
+
+/* ==================================================================== */
+/*                    Register "SH_RTC1_INT_CONFIG"                     */
+/*                SHub RTC 1 Interrupt Config Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC1_INT_CONFIG		__IA64_UL_CONST(0x0000000110001480)
+#define SH2_RTC1_INT_CONFIG		__IA64_UL_CONST(0x0000000010001480)
+#define SH_RTC1_INT_CONFIG_MASK		__IA64_UL_CONST(0x0ff3ffffffefffff)
+#define SH_RTC1_INT_CONFIG_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_RTC1_INT_CONFIG_TYPE                                            */
+/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
+#define SH_RTC1_INT_CONFIG_TYPE_SHFT			0
+#define SH_RTC1_INT_CONFIG_TYPE_MASK	__IA64_UL_CONST(0x0000000000000007)
+
+/*   SH_RTC1_INT_CONFIG_AGT                                             */
+/*   Description:  Agent, must be 0 for SHub                            */
+#define SH_RTC1_INT_CONFIG_AGT_SHFT			3
+#define SH_RTC1_INT_CONFIG_AGT_MASK	__IA64_UL_CONST(0x0000000000000008)
+
+/*   SH_RTC1_INT_CONFIG_PID                                             */
+/*   Description:  Processor ID, same setting as on targeted McKinley  */
+#define SH_RTC1_INT_CONFIG_PID_SHFT			4
+#define SH_RTC1_INT_CONFIG_PID_MASK	__IA64_UL_CONST(0x00000000000ffff0)
+
+/*   SH_RTC1_INT_CONFIG_BASE                                            */
+/*   Description:  Optional interrupt vector area, 2MB aligned          */
+#define SH_RTC1_INT_CONFIG_BASE_SHFT			21
+#define SH_RTC1_INT_CONFIG_BASE_MASK	__IA64_UL_CONST(0x0003ffffffe00000)
+
+/*   SH_RTC1_INT_CONFIG_IDX                                             */
+/*   Description:  Targeted McKinley interrupt vector                   */
+#define SH_RTC1_INT_CONFIG_IDX_SHFT			52
+#define SH_RTC1_INT_CONFIG_IDX_MASK	__IA64_UL_CONST(0x0ff0000000000000)
+
+/* ==================================================================== */
+/*                    Register "SH_RTC1_INT_ENABLE"                     */
+/*                SHub RTC 1 Interrupt Enable Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC1_INT_ENABLE		__IA64_UL_CONST(0x0000000110001500)
+#define SH2_RTC1_INT_ENABLE		__IA64_UL_CONST(0x0000000010001500)
+#define SH_RTC1_INT_ENABLE_MASK		__IA64_UL_CONST(0x0000000000000001)
+#define SH_RTC1_INT_ENABLE_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_RTC1_INT_ENABLE_RTC1_ENABLE                                     */
+/*   Description:  Enable RTC 1 Interrupt                               */
+#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT		0
+#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK \
+					__IA64_UL_CONST(0x0000000000000001)
+
+/* ==================================================================== */
+/*                    Register "SH_RTC2_INT_CONFIG"                     */
+/*                SHub RTC 2 Interrupt Config Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC2_INT_CONFIG		__IA64_UL_CONST(0x0000000110001580)
+#define SH2_RTC2_INT_CONFIG		__IA64_UL_CONST(0x0000000010001580)
+#define SH_RTC2_INT_CONFIG_MASK		__IA64_UL_CONST(0x0ff3ffffffefffff)
+#define SH_RTC2_INT_CONFIG_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_RTC2_INT_CONFIG_TYPE                                            */
+/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
+#define SH_RTC2_INT_CONFIG_TYPE_SHFT			0
+#define SH_RTC2_INT_CONFIG_TYPE_MASK	__IA64_UL_CONST(0x0000000000000007)
+
+/*   SH_RTC2_INT_CONFIG_AGT                                             */
+/*   Description:  Agent, must be 0 for SHub                            */
+#define SH_RTC2_INT_CONFIG_AGT_SHFT			3
+#define SH_RTC2_INT_CONFIG_AGT_MASK	__IA64_UL_CONST(0x0000000000000008)
+
+/*   SH_RTC2_INT_CONFIG_PID                                             */
+/*   Description:  Processor ID, same setting as on targeted McKinley  */
+#define SH_RTC2_INT_CONFIG_PID_SHFT			4
+#define SH_RTC2_INT_CONFIG_PID_MASK	__IA64_UL_CONST(0x00000000000ffff0)
+
+/*   SH_RTC2_INT_CONFIG_BASE                                            */
+/*   Description:  Optional interrupt vector area, 2MB aligned          */
+#define SH_RTC2_INT_CONFIG_BASE_SHFT			21
+#define SH_RTC2_INT_CONFIG_BASE_MASK	__IA64_UL_CONST(0x0003ffffffe00000)
+
+/*   SH_RTC2_INT_CONFIG_IDX                                             */
+/*   Description:  Targeted McKinley interrupt vector                   */
+#define SH_RTC2_INT_CONFIG_IDX_SHFT			52
+#define SH_RTC2_INT_CONFIG_IDX_MASK	__IA64_UL_CONST(0x0ff0000000000000)
+
+/* ==================================================================== */
+/*                    Register "SH_RTC2_INT_ENABLE"                     */
+/*                SHub RTC 2 Interrupt Enable Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC2_INT_ENABLE		__IA64_UL_CONST(0x0000000110001600)
+#define SH2_RTC2_INT_ENABLE		__IA64_UL_CONST(0x0000000010001600)
+#define SH_RTC2_INT_ENABLE_MASK		__IA64_UL_CONST(0x0000000000000001)
+#define SH_RTC2_INT_ENABLE_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_RTC2_INT_ENABLE_RTC2_ENABLE                                     */
+/*   Description:  Enable RTC 2 Interrupt                               */
+#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT		0
+#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK \
+					__IA64_UL_CONST(0x0000000000000001)
+
+/* ==================================================================== */
+/*                    Register "SH_RTC3_INT_CONFIG"                     */
+/*                SHub RTC 3 Interrupt Config Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC3_INT_CONFIG		__IA64_UL_CONST(0x0000000110001680)
+#define SH2_RTC3_INT_CONFIG		__IA64_UL_CONST(0x0000000010001680)
+#define SH_RTC3_INT_CONFIG_MASK		__IA64_UL_CONST(0x0ff3ffffffefffff)
+#define SH_RTC3_INT_CONFIG_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_RTC3_INT_CONFIG_TYPE                                            */
+/*   Description:  Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT       */
+#define SH_RTC3_INT_CONFIG_TYPE_SHFT			0
+#define SH_RTC3_INT_CONFIG_TYPE_MASK	__IA64_UL_CONST(0x0000000000000007)
+
+/*   SH_RTC3_INT_CONFIG_AGT                                             */
+/*   Description:  Agent, must be 0 for SHub                            */
+#define SH_RTC3_INT_CONFIG_AGT_SHFT			3
+#define SH_RTC3_INT_CONFIG_AGT_MASK	__IA64_UL_CONST(0x0000000000000008)
+
+/*   SH_RTC3_INT_CONFIG_PID                                             */
+/*   Description:  Processor ID, same setting as on targeted McKinley  */
+#define SH_RTC3_INT_CONFIG_PID_SHFT			4
+#define SH_RTC3_INT_CONFIG_PID_MASK	__IA64_UL_CONST(0x00000000000ffff0)
+
+/*   SH_RTC3_INT_CONFIG_BASE                                            */
+/*   Description:  Optional interrupt vector area, 2MB aligned          */
+#define SH_RTC3_INT_CONFIG_BASE_SHFT			21
+#define SH_RTC3_INT_CONFIG_BASE_MASK	__IA64_UL_CONST(0x0003ffffffe00000)
+
+/*   SH_RTC3_INT_CONFIG_IDX                                             */
+/*   Description:  Targeted McKinley interrupt vector                   */
+#define SH_RTC3_INT_CONFIG_IDX_SHFT			52
+#define SH_RTC3_INT_CONFIG_IDX_MASK	__IA64_UL_CONST(0x0ff0000000000000)
+
+/* ==================================================================== */
+/*                    Register "SH_RTC3_INT_ENABLE"                     */
+/*                SHub RTC 3 Interrupt Enable Registers                 */
+/* ==================================================================== */
+
+#define SH1_RTC3_INT_ENABLE		__IA64_UL_CONST(0x0000000110001700)
+#define SH2_RTC3_INT_ENABLE		__IA64_UL_CONST(0x0000000010001700)
+#define SH_RTC3_INT_ENABLE_MASK		__IA64_UL_CONST(0x0000000000000001)
+#define SH_RTC3_INT_ENABLE_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_RTC3_INT_ENABLE_RTC3_ENABLE                                     */
+/*   Description:  Enable RTC 3 Interrupt                               */
+#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT		0
+#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK \
+					__IA64_UL_CONST(0x0000000000000001)
+
+/*   SH_EVENT_OCCURRED_RTC1_INT                                         */
+/*   Description:  Pending RTC 1 Interrupt                              */
+#define SH_EVENT_OCCURRED_RTC1_INT_SHFT			24
+#define SH_EVENT_OCCURRED_RTC1_INT_MASK	__IA64_UL_CONST(0x0000000001000000)
+
+/*   SH_EVENT_OCCURRED_RTC2_INT                                         */
+/*   Description:  Pending RTC 2 Interrupt                              */
+#define SH_EVENT_OCCURRED_RTC2_INT_SHFT			25
+#define SH_EVENT_OCCURRED_RTC2_INT_MASK	__IA64_UL_CONST(0x0000000002000000)
+
+/*   SH_EVENT_OCCURRED_RTC3_INT                                         */
+/*   Description:  Pending RTC 3 Interrupt                              */
+#define SH_EVENT_OCCURRED_RTC3_INT_SHFT			26
+#define SH_EVENT_OCCURRED_RTC3_INT_MASK	__IA64_UL_CONST(0x0000000004000000)
+
+/* ==================================================================== */
+/*                       Register "SH_IPI_ACCESS"                       */
+/*                 CPU interrupt Access Permission Bits                 */
+/* ==================================================================== */
+
+#define SH1_IPI_ACCESS			__IA64_UL_CONST(0x0000000110060480)
+#define SH2_IPI_ACCESS0			__IA64_UL_CONST(0x0000000010060c00)
+#define SH2_IPI_ACCESS1			__IA64_UL_CONST(0x0000000010060c80)
+#define SH2_IPI_ACCESS2			__IA64_UL_CONST(0x0000000010060d00)
+#define SH2_IPI_ACCESS3			__IA64_UL_CONST(0x0000000010060d80)
+
+/* ==================================================================== */
+/*                        Register "SH_INT_CMPB"                        */
+/*                  RTC Compare Value for Processor B                   */
+/* ==================================================================== */
+
+#define SH1_INT_CMPB			__IA64_UL_CONST(0x00000001101b0080)
+#define SH2_INT_CMPB			__IA64_UL_CONST(0x00000000101b0080)
+#define SH_INT_CMPB_MASK		__IA64_UL_CONST(0x007fffffffffffff)
+#define SH_INT_CMPB_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_INT_CMPB_REAL_TIME_CMPB                                         */
+/*   Description:  Real Time Clock Compare                              */
+#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT			0
+#define SH_INT_CMPB_REAL_TIME_CMPB_MASK	__IA64_UL_CONST(0x007fffffffffffff)
+
+/* ==================================================================== */
+/*                        Register "SH_INT_CMPC"                        */
+/*                  RTC Compare Value for Processor C                   */
+/* ==================================================================== */
+
+#define SH1_INT_CMPC			__IA64_UL_CONST(0x00000001101b0100)
+#define SH2_INT_CMPC			__IA64_UL_CONST(0x00000000101b0100)
+#define SH_INT_CMPC_MASK		__IA64_UL_CONST(0x007fffffffffffff)
+#define SH_INT_CMPC_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_INT_CMPC_REAL_TIME_CMPC                                         */
+/*   Description:  Real Time Clock Compare                              */
+#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT			0
+#define SH_INT_CMPC_REAL_TIME_CMPC_MASK	__IA64_UL_CONST(0x007fffffffffffff)
+
+/* ==================================================================== */
+/*                        Register "SH_INT_CMPD"                        */
+/*                  RTC Compare Value for Processor D                   */
+/* ==================================================================== */
+
+#define SH1_INT_CMPD			__IA64_UL_CONST(0x00000001101b0180)
+#define SH2_INT_CMPD			__IA64_UL_CONST(0x00000000101b0180)
+#define SH_INT_CMPD_MASK		__IA64_UL_CONST(0x007fffffffffffff)
+#define SH_INT_CMPD_INIT		__IA64_UL_CONST(0x0000000000000000)
+
+/*   SH_INT_CMPD_REAL_TIME_CMPD                                         */
+/*   Description:  Real Time Clock Compare                              */
+#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT			0
+#define SH_INT_CMPD_REAL_TIME_CMPD_MASK	__IA64_UL_CONST(0x007fffffffffffff)
+
+/* ==================================================================== */
+/*                Register "SH_MD_DQLP_MMR_DIR_PRIVEC0"                 */
+/*                      privilege vector for acc=0                      */
+/* ==================================================================== */
+#define SH1_MD_DQLP_MMR_DIR_PRIVEC0	__IA64_UL_CONST(0x0000000100030300)
+
+/* ==================================================================== */
+/*                Register "SH_MD_DQRP_MMR_DIR_PRIVEC0"                 */
+/*                      privilege vector for acc=0                      */
+/* ==================================================================== */
+#define SH1_MD_DQRP_MMR_DIR_PRIVEC0	__IA64_UL_CONST(0x0000000100050300)
+
+/* ==================================================================== */
+/* Some MMRs are functionally identical (or close enough) on both SHUB1 */
+/* and SHUB2 that it makes sense to define a geberic name for the MMR.  */
+/* It is acceptible to use (for example) SH_IPI_INT to reference the    */
+/* the IPI MMR. The value of SH_IPI_INT is determined at runtime based  */
+/* on the type of the SHUB. Do not use these #defines in performance    */
+/* critical code  or loops - there is a small performance penalty.      */
+/* ==================================================================== */
+#define shubmmr(a,b) 		(is_shub2() ? a##2_##b : a##1_##b)
+
+#define SH_REAL_JUNK_BUS_LED0	shubmmr(SH, REAL_JUNK_BUS_LED0)
+#define SH_IPI_INT		shubmmr(SH, IPI_INT)
+#define SH_EVENT_OCCURRED	shubmmr(SH, EVENT_OCCURRED)
+#define SH_EVENT_OCCURRED_ALIAS	shubmmr(SH, EVENT_OCCURRED_ALIAS)
+#define SH_RTC			shubmmr(SH, RTC)
+#define SH_RTC1_INT_CONFIG	shubmmr(SH, RTC1_INT_CONFIG)
+#define SH_RTC1_INT_ENABLE	shubmmr(SH, RTC1_INT_ENABLE)
+#define SH_RTC2_INT_CONFIG	shubmmr(SH, RTC2_INT_CONFIG)
+#define SH_RTC2_INT_ENABLE	shubmmr(SH, RTC2_INT_ENABLE)
+#define SH_RTC3_INT_CONFIG	shubmmr(SH, RTC3_INT_CONFIG)
+#define SH_RTC3_INT_ENABLE	shubmmr(SH, RTC3_INT_ENABLE)
+#define SH_INT_CMPB		shubmmr(SH, INT_CMPB)
+#define SH_INT_CMPC		shubmmr(SH, INT_CMPC)
+#define SH_INT_CMPD		shubmmr(SH, INT_CMPD)
+
+/* ========================================================================== */
+/*                        Register "SH2_BT_ENG_CSR_0"                         */
+/*                    Engine 0 Control and Status Register                    */
+/* ========================================================================== */
+
+#define SH2_BT_ENG_CSR_0		__IA64_UL_CONST(0x0000000030040000)
+#define SH2_BT_ENG_SRC_ADDR_0		__IA64_UL_CONST(0x0000000030040080)
+#define SH2_BT_ENG_DEST_ADDR_0		__IA64_UL_CONST(0x0000000030040100)
+#define SH2_BT_ENG_NOTIF_ADDR_0		__IA64_UL_CONST(0x0000000030040180)
+
+/* ========================================================================== */
+/*                       BTE interfaces 1-3                                   */
+/* ========================================================================== */
+
+#define SH2_BT_ENG_CSR_1		__IA64_UL_CONST(0x0000000030050000)
+#define SH2_BT_ENG_CSR_2		__IA64_UL_CONST(0x0000000030060000)
+#define SH2_BT_ENG_CSR_3		__IA64_UL_CONST(0x0000000030070000)
+
+#endif /* _ASM_IA64_SN_SHUB_MMR_H */
diff --git a/arch/ia64/include/asm/sn/shubio.h b/arch/ia64/include/asm/sn/shubio.h
new file mode 100644
index 000000000000..22a6f18a5313
--- /dev/null
+++ b/arch/ia64/include/asm/sn/shubio.h
@@ -0,0 +1,3358 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SHUBIO_H
+#define _ASM_IA64_SN_SHUBIO_H
+
+#define HUB_WIDGET_ID_MAX	0xf
+#define IIO_NUM_ITTES		7
+#define HUB_NUM_BIG_WINDOW	(IIO_NUM_ITTES - 1)
+
+#define		IIO_WID			0x00400000	/* Crosstalk Widget Identification */
+							/* This register is also accessible from
+							 * Crosstalk at address 0x0.  */
+#define		IIO_WSTAT		0x00400008	/* Crosstalk Widget Status */
+#define		IIO_WCR			0x00400020	/* Crosstalk Widget Control Register */
+#define		IIO_ILAPR		0x00400100	/* IO Local Access Protection Register */
+#define		IIO_ILAPO		0x00400108	/* IO Local Access Protection Override */
+#define		IIO_IOWA		0x00400110	/* IO Outbound Widget Access */
+#define		IIO_IIWA		0x00400118	/* IO Inbound Widget Access */
+#define		IIO_IIDEM		0x00400120	/* IO Inbound Device Error Mask */
+#define		IIO_ILCSR		0x00400128	/* IO LLP Control and Status Register */
+#define		IIO_ILLR		0x00400130	/* IO LLP Log Register    */
+#define		IIO_IIDSR		0x00400138	/* IO Interrupt Destination */
+
+#define		IIO_IGFX0		0x00400140	/* IO Graphics Node-Widget Map 0 */
+#define		IIO_IGFX1		0x00400148	/* IO Graphics Node-Widget Map 1 */
+
+#define		IIO_ISCR0		0x00400150	/* IO Scratch Register 0 */
+#define		IIO_ISCR1		0x00400158	/* IO Scratch Register 1 */
+
+#define		IIO_ITTE1		0x00400160	/* IO Translation Table Entry 1 */
+#define		IIO_ITTE2		0x00400168	/* IO Translation Table Entry 2 */
+#define		IIO_ITTE3		0x00400170	/* IO Translation Table Entry 3 */
+#define		IIO_ITTE4		0x00400178	/* IO Translation Table Entry 4 */
+#define		IIO_ITTE5		0x00400180	/* IO Translation Table Entry 5 */
+#define		IIO_ITTE6		0x00400188	/* IO Translation Table Entry 6 */
+#define		IIO_ITTE7		0x00400190	/* IO Translation Table Entry 7 */
+
+#define		IIO_IPRB0		0x00400198	/* IO PRB Entry 0   */
+#define		IIO_IPRB8		0x004001A0	/* IO PRB Entry 8   */
+#define		IIO_IPRB9		0x004001A8	/* IO PRB Entry 9   */
+#define		IIO_IPRBA		0x004001B0	/* IO PRB Entry A   */
+#define		IIO_IPRBB		0x004001B8	/* IO PRB Entry B   */
+#define		IIO_IPRBC		0x004001C0	/* IO PRB Entry C   */
+#define		IIO_IPRBD		0x004001C8	/* IO PRB Entry D   */
+#define		IIO_IPRBE		0x004001D0	/* IO PRB Entry E   */
+#define		IIO_IPRBF		0x004001D8	/* IO PRB Entry F   */
+
+#define		IIO_IXCC		0x004001E0	/* IO Crosstalk Credit Count Timeout */
+#define		IIO_IMEM		0x004001E8	/* IO Miscellaneous Error Mask */
+#define		IIO_IXTT		0x004001F0	/* IO Crosstalk Timeout Threshold */
+#define		IIO_IECLR		0x004001F8	/* IO Error Clear Register */
+#define		IIO_IBCR		0x00400200	/* IO BTE Control Register */
+
+#define		IIO_IXSM		0x00400208	/* IO Crosstalk Spurious Message */
+#define		IIO_IXSS		0x00400210	/* IO Crosstalk Spurious Sideband */
+
+#define		IIO_ILCT		0x00400218	/* IO LLP Channel Test    */
+
+#define		IIO_IIEPH1 		0x00400220	/* IO Incoming Error Packet Header, Part 1 */
+#define		IIO_IIEPH2 		0x00400228	/* IO Incoming Error Packet Header, Part 2 */
+
+#define		IIO_ISLAPR 		0x00400230	/* IO SXB Local Access Protection Regster */
+#define		IIO_ISLAPO 		0x00400238	/* IO SXB Local Access Protection Override */
+
+#define		IIO_IWI			0x00400240	/* IO Wrapper Interrupt Register */
+#define		IIO_IWEL		0x00400248	/* IO Wrapper Error Log Register */
+#define		IIO_IWC			0x00400250	/* IO Wrapper Control Register */
+#define		IIO_IWS			0x00400258	/* IO Wrapper Status Register */
+#define		IIO_IWEIM		0x00400260	/* IO Wrapper Error Interrupt Masking Register */
+
+#define		IIO_IPCA		0x00400300	/* IO PRB Counter Adjust */
+
+#define		IIO_IPRTE0_A		0x00400308	/* IO PIO Read Address Table Entry 0, Part A */
+#define		IIO_IPRTE1_A		0x00400310	/* IO PIO Read Address Table Entry 1, Part A */
+#define		IIO_IPRTE2_A		0x00400318	/* IO PIO Read Address Table Entry 2, Part A */
+#define		IIO_IPRTE3_A		0x00400320	/* IO PIO Read Address Table Entry 3, Part A */
+#define		IIO_IPRTE4_A		0x00400328	/* IO PIO Read Address Table Entry 4, Part A */
+#define		IIO_IPRTE5_A		0x00400330	/* IO PIO Read Address Table Entry 5, Part A */
+#define		IIO_IPRTE6_A		0x00400338	/* IO PIO Read Address Table Entry 6, Part A */
+#define		IIO_IPRTE7_A		0x00400340	/* IO PIO Read Address Table Entry 7, Part A */
+
+#define		IIO_IPRTE0_B		0x00400348	/* IO PIO Read Address Table Entry 0, Part B */
+#define		IIO_IPRTE1_B		0x00400350	/* IO PIO Read Address Table Entry 1, Part B */
+#define		IIO_IPRTE2_B		0x00400358	/* IO PIO Read Address Table Entry 2, Part B */
+#define		IIO_IPRTE3_B		0x00400360	/* IO PIO Read Address Table Entry 3, Part B */
+#define		IIO_IPRTE4_B		0x00400368	/* IO PIO Read Address Table Entry 4, Part B */
+#define		IIO_IPRTE5_B		0x00400370	/* IO PIO Read Address Table Entry 5, Part B */
+#define		IIO_IPRTE6_B		0x00400378	/* IO PIO Read Address Table Entry 6, Part B */
+#define		IIO_IPRTE7_B		0x00400380	/* IO PIO Read Address Table Entry 7, Part B */
+
+#define		IIO_IPDR		0x00400388	/* IO PIO Deallocation Register */
+#define		IIO_ICDR		0x00400390	/* IO CRB Entry Deallocation Register */
+#define		IIO_IFDR		0x00400398	/* IO IOQ FIFO Depth Register */
+#define		IIO_IIAP		0x004003A0	/* IO IIQ Arbitration Parameters */
+#define		IIO_ICMR		0x004003A8	/* IO CRB Management Register */
+#define		IIO_ICCR		0x004003B0	/* IO CRB Control Register */
+#define		IIO_ICTO		0x004003B8	/* IO CRB Timeout   */
+#define		IIO_ICTP		0x004003C0	/* IO CRB Timeout Prescalar */
+
+#define		IIO_ICRB0_A		0x00400400	/* IO CRB Entry 0_A */
+#define		IIO_ICRB0_B		0x00400408	/* IO CRB Entry 0_B */
+#define		IIO_ICRB0_C		0x00400410	/* IO CRB Entry 0_C */
+#define		IIO_ICRB0_D		0x00400418	/* IO CRB Entry 0_D */
+#define		IIO_ICRB0_E		0x00400420	/* IO CRB Entry 0_E */
+
+#define		IIO_ICRB1_A		0x00400430	/* IO CRB Entry 1_A */
+#define		IIO_ICRB1_B		0x00400438	/* IO CRB Entry 1_B */
+#define		IIO_ICRB1_C		0x00400440	/* IO CRB Entry 1_C */
+#define		IIO_ICRB1_D		0x00400448	/* IO CRB Entry 1_D */
+#define		IIO_ICRB1_E		0x00400450	/* IO CRB Entry 1_E */
+
+#define		IIO_ICRB2_A		0x00400460	/* IO CRB Entry 2_A */
+#define		IIO_ICRB2_B		0x00400468	/* IO CRB Entry 2_B */
+#define		IIO_ICRB2_C		0x00400470	/* IO CRB Entry 2_C */
+#define		IIO_ICRB2_D		0x00400478	/* IO CRB Entry 2_D */
+#define		IIO_ICRB2_E		0x00400480	/* IO CRB Entry 2_E */
+
+#define		IIO_ICRB3_A		0x00400490	/* IO CRB Entry 3_A */
+#define		IIO_ICRB3_B		0x00400498	/* IO CRB Entry 3_B */
+#define		IIO_ICRB3_C		0x004004a0	/* IO CRB Entry 3_C */
+#define		IIO_ICRB3_D		0x004004a8	/* IO CRB Entry 3_D */
+#define		IIO_ICRB3_E		0x004004b0	/* IO CRB Entry 3_E */
+
+#define		IIO_ICRB4_A		0x004004c0	/* IO CRB Entry 4_A */
+#define		IIO_ICRB4_B		0x004004c8	/* IO CRB Entry 4_B */
+#define		IIO_ICRB4_C		0x004004d0	/* IO CRB Entry 4_C */
+#define		IIO_ICRB4_D		0x004004d8	/* IO CRB Entry 4_D */
+#define		IIO_ICRB4_E		0x004004e0	/* IO CRB Entry 4_E */
+
+#define		IIO_ICRB5_A		0x004004f0	/* IO CRB Entry 5_A */
+#define		IIO_ICRB5_B		0x004004f8	/* IO CRB Entry 5_B */
+#define		IIO_ICRB5_C		0x00400500	/* IO CRB Entry 5_C */
+#define		IIO_ICRB5_D		0x00400508	/* IO CRB Entry 5_D */
+#define		IIO_ICRB5_E		0x00400510	/* IO CRB Entry 5_E */
+
+#define		IIO_ICRB6_A		0x00400520	/* IO CRB Entry 6_A */
+#define		IIO_ICRB6_B		0x00400528	/* IO CRB Entry 6_B */
+#define		IIO_ICRB6_C		0x00400530	/* IO CRB Entry 6_C */
+#define		IIO_ICRB6_D		0x00400538	/* IO CRB Entry 6_D */
+#define		IIO_ICRB6_E		0x00400540	/* IO CRB Entry 6_E */
+
+#define		IIO_ICRB7_A		0x00400550	/* IO CRB Entry 7_A */
+#define		IIO_ICRB7_B		0x00400558	/* IO CRB Entry 7_B */
+#define		IIO_ICRB7_C		0x00400560	/* IO CRB Entry 7_C */
+#define		IIO_ICRB7_D		0x00400568	/* IO CRB Entry 7_D */
+#define		IIO_ICRB7_E		0x00400570	/* IO CRB Entry 7_E */
+
+#define		IIO_ICRB8_A		0x00400580	/* IO CRB Entry 8_A */
+#define		IIO_ICRB8_B		0x00400588	/* IO CRB Entry 8_B */
+#define		IIO_ICRB8_C		0x00400590	/* IO CRB Entry 8_C */
+#define		IIO_ICRB8_D		0x00400598	/* IO CRB Entry 8_D */
+#define		IIO_ICRB8_E		0x004005a0	/* IO CRB Entry 8_E */
+
+#define		IIO_ICRB9_A		0x004005b0	/* IO CRB Entry 9_A */
+#define		IIO_ICRB9_B		0x004005b8	/* IO CRB Entry 9_B */
+#define		IIO_ICRB9_C		0x004005c0	/* IO CRB Entry 9_C */
+#define		IIO_ICRB9_D		0x004005c8	/* IO CRB Entry 9_D */
+#define		IIO_ICRB9_E		0x004005d0	/* IO CRB Entry 9_E */
+
+#define		IIO_ICRBA_A		0x004005e0	/* IO CRB Entry A_A */
+#define		IIO_ICRBA_B		0x004005e8	/* IO CRB Entry A_B */
+#define		IIO_ICRBA_C		0x004005f0	/* IO CRB Entry A_C */
+#define		IIO_ICRBA_D		0x004005f8	/* IO CRB Entry A_D */
+#define		IIO_ICRBA_E		0x00400600	/* IO CRB Entry A_E */
+
+#define		IIO_ICRBB_A		0x00400610	/* IO CRB Entry B_A */
+#define		IIO_ICRBB_B		0x00400618	/* IO CRB Entry B_B */
+#define		IIO_ICRBB_C		0x00400620	/* IO CRB Entry B_C */
+#define		IIO_ICRBB_D		0x00400628	/* IO CRB Entry B_D */
+#define		IIO_ICRBB_E		0x00400630	/* IO CRB Entry B_E */
+
+#define		IIO_ICRBC_A		0x00400640	/* IO CRB Entry C_A */
+#define		IIO_ICRBC_B		0x00400648	/* IO CRB Entry C_B */
+#define		IIO_ICRBC_C		0x00400650	/* IO CRB Entry C_C */
+#define		IIO_ICRBC_D		0x00400658	/* IO CRB Entry C_D */
+#define		IIO_ICRBC_E		0x00400660	/* IO CRB Entry C_E */
+
+#define		IIO_ICRBD_A		0x00400670	/* IO CRB Entry D_A */
+#define		IIO_ICRBD_B		0x00400678	/* IO CRB Entry D_B */
+#define		IIO_ICRBD_C		0x00400680	/* IO CRB Entry D_C */
+#define		IIO_ICRBD_D		0x00400688	/* IO CRB Entry D_D */
+#define		IIO_ICRBD_E		0x00400690	/* IO CRB Entry D_E */
+
+#define		IIO_ICRBE_A		0x004006a0	/* IO CRB Entry E_A */
+#define		IIO_ICRBE_B		0x004006a8	/* IO CRB Entry E_B */
+#define		IIO_ICRBE_C		0x004006b0	/* IO CRB Entry E_C */
+#define		IIO_ICRBE_D		0x004006b8	/* IO CRB Entry E_D */
+#define		IIO_ICRBE_E		0x004006c0	/* IO CRB Entry E_E */
+
+#define		IIO_ICSML		0x00400700	/* IO CRB Spurious Message Low */
+#define		IIO_ICSMM		0x00400708	/* IO CRB Spurious Message Middle */
+#define		IIO_ICSMH		0x00400710	/* IO CRB Spurious Message High */
+
+#define		IIO_IDBSS		0x00400718	/* IO Debug Submenu Select */
+
+#define		IIO_IBLS0		0x00410000	/* IO BTE Length Status 0 */
+#define		IIO_IBSA0		0x00410008	/* IO BTE Source Address 0 */
+#define		IIO_IBDA0		0x00410010	/* IO BTE Destination Address 0 */
+#define		IIO_IBCT0		0x00410018	/* IO BTE Control Terminate 0 */
+#define		IIO_IBNA0		0x00410020	/* IO BTE Notification Address 0 */
+#define		IIO_IBIA0		0x00410028	/* IO BTE Interrupt Address 0 */
+#define		IIO_IBLS1		0x00420000	/* IO BTE Length Status 1 */
+#define		IIO_IBSA1		0x00420008	/* IO BTE Source Address 1 */
+#define		IIO_IBDA1		0x00420010	/* IO BTE Destination Address 1 */
+#define		IIO_IBCT1		0x00420018	/* IO BTE Control Terminate 1 */
+#define		IIO_IBNA1		0x00420020	/* IO BTE Notification Address 1 */
+#define		IIO_IBIA1		0x00420028	/* IO BTE Interrupt Address 1 */
+
+#define		IIO_IPCR		0x00430000	/* IO Performance Control */
+#define		IIO_IPPR		0x00430008	/* IO Performance Profiling */
+
+/************************************************************************
+ *									*
+ * Description:  This register echoes some information from the         *
+ * LB_REV_ID register. It is available through Crosstalk as described   *
+ * above. The REV_NUM and MFG_NUM fields receive their values from      *
+ * the REVISION and MANUFACTURER fields in the LB_REV_ID register.      *
+ * The PART_NUM field's value is the Crosstalk device ID number that    *
+ * Steve Miller assigned to the SHub chip.                              *
+ *									*
+ ************************************************************************/
+
+typedef union ii_wid_u {
+	u64 ii_wid_regval;
+	struct {
+		u64 w_rsvd_1:1;
+		u64 w_mfg_num:11;
+		u64 w_part_num:16;
+		u64 w_rev_num:4;
+		u64 w_rsvd:32;
+	} ii_wid_fld_s;
+} ii_wid_u_t;
+
+/************************************************************************
+ *									*
+ *  The fields in this register are set upon detection of an error      *
+ * and cleared by various mechanisms, as explained in the               *
+ * description.                                                         *
+ *									*
+ ************************************************************************/
+
+typedef union ii_wstat_u {
+	u64 ii_wstat_regval;
+	struct {
+		u64 w_pending:4;
+		u64 w_xt_crd_to:1;
+		u64 w_xt_tail_to:1;
+		u64 w_rsvd_3:3;
+		u64 w_tx_mx_rty:1;
+		u64 w_rsvd_2:6;
+		u64 w_llp_tx_cnt:8;
+		u64 w_rsvd_1:8;
+		u64 w_crazy:1;
+		u64 w_rsvd:31;
+	} ii_wstat_fld_s;
+} ii_wstat_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  This is a read-write enabled register. It controls     *
+ * various aspects of the Crosstalk flow control.                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_wcr_u {
+	u64 ii_wcr_regval;
+	struct {
+		u64 w_wid:4;
+		u64 w_tag:1;
+		u64 w_rsvd_1:8;
+		u64 w_dst_crd:3;
+		u64 w_f_bad_pkt:1;
+		u64 w_dir_con:1;
+		u64 w_e_thresh:5;
+		u64 w_rsvd:41;
+	} ii_wcr_fld_s;
+} ii_wcr_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  This register's value is a bit vector that guards      *
+ * access to local registers within the II as well as to external       *
+ * Crosstalk widgets. Each bit in the register corresponds to a         *
+ * particular region in the system; a region consists of one, two or    *
+ * four nodes (depending on the value of the REGION_SIZE field in the   *
+ * LB_REV_ID register, which is documented in Section 8.3.1.1). The     *
+ * protection provided by this register applies to PIO read             *
+ * operations as well as PIO write operations. The II will perform a    *
+ * PIO read or write request only if the bit for the requestor's        *
+ * region is set; otherwise, the II will not perform the requested      *
+ * operation and will return an error response. When a PIO read or      *
+ * write request targets an external Crosstalk widget, then not only    *
+ * must the bit for the requestor's region be set in the ILAPR, but     *
+ * also the target widget's bit in the IOWA register must be set in     *
+ * order for the II to perform the requested operation; otherwise,      *
+ * the II will return an error response. Hence, the protection          *
+ * provided by the IOWA register supplements the protection provided    *
+ * by the ILAPR for requests that target external Crosstalk widgets.    *
+ * This register itself can be accessed only by the nodes whose         *
+ * region ID bits are enabled in this same register. It can also be     *
+ * accessed through the IAlias space by the local processors.           *
+ * The reset value of this register allows access by all nodes.         *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ilapr_u {
+	u64 ii_ilapr_regval;
+	struct {
+		u64 i_region:64;
+	} ii_ilapr_fld_s;
+} ii_ilapr_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  A write to this register of the 64-bit value           *
+ * "SGIrules" in ASCII, will cause the bit in the ILAPR register        *
+ * corresponding to the region of the requestor to be set (allow        *
+ * access). A write of any other value will be ignored. Access          *
+ * protection for this register is "SGIrules".                          *
+ * This register can also be accessed through the IAlias space.         *
+ * However, this access will not change the access permissions in the   *
+ * ILAPR.                                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ilapo_u {
+	u64 ii_ilapo_regval;
+	struct {
+		u64 i_io_ovrride:64;
+	} ii_ilapo_fld_s;
+} ii_ilapo_u_t;
+
+/************************************************************************
+ *									*
+ *  This register qualifies all the PIO and Graphics writes launched    *
+ * from the SHUB towards a widget.                                      *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iowa_u {
+	u64 ii_iowa_regval;
+	struct {
+		u64 i_w0_oac:1;
+		u64 i_rsvd_1:7;
+		u64 i_wx_oac:8;
+		u64 i_rsvd:48;
+	} ii_iowa_fld_s;
+} ii_iowa_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  This register qualifies all the requests launched      *
+ * from a widget towards the Shub. This register is intended to be      *
+ * used by software in case of misbehaving widgets.                     *
+ *									*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iiwa_u {
+	u64 ii_iiwa_regval;
+	struct {
+		u64 i_w0_iac:1;
+		u64 i_rsvd_1:7;
+		u64 i_wx_iac:8;
+		u64 i_rsvd:48;
+	} ii_iiwa_fld_s;
+} ii_iiwa_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  This register qualifies all the operations launched    *
+ * from a widget towards the SHub. It allows individual access          *
+ * control for up to 8 devices per widget. A device refers to           *
+ * individual DMA master hosted by a widget.                            *
+ * The bits in each field of this register are cleared by the Shub      *
+ * upon detection of an error which requires the device to be           *
+ * disabled. These fields assume that 0=TNUM=7 (i.e., Bridge-centric    *
+ * Crosstalk). Whether or not a device has access rights to this        *
+ * Shub is determined by an AND of the device enable bit in the         *
+ * appropriate field of this register and the corresponding bit in      *
+ * the Wx_IAC field (for the widget which this device belongs to).      *
+ * The bits in this field are set by writing a 1 to them. Incoming      *
+ * replies from Crosstalk are not subject to this access control        *
+ * mechanism.                                                           *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iidem_u {
+	u64 ii_iidem_regval;
+	struct {
+		u64 i_w8_dxs:8;
+		u64 i_w9_dxs:8;
+		u64 i_wa_dxs:8;
+		u64 i_wb_dxs:8;
+		u64 i_wc_dxs:8;
+		u64 i_wd_dxs:8;
+		u64 i_we_dxs:8;
+		u64 i_wf_dxs:8;
+	} ii_iidem_fld_s;
+} ii_iidem_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the various programmable fields necessary    *
+ * for controlling and observing the LLP signals.                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ilcsr_u {
+	u64 ii_ilcsr_regval;
+	struct {
+		u64 i_nullto:6;
+		u64 i_rsvd_4:2;
+		u64 i_wrmrst:1;
+		u64 i_rsvd_3:1;
+		u64 i_llp_en:1;
+		u64 i_bm8:1;
+		u64 i_llp_stat:2;
+		u64 i_remote_power:1;
+		u64 i_rsvd_2:1;
+		u64 i_maxrtry:10;
+		u64 i_d_avail_sel:2;
+		u64 i_rsvd_1:4;
+		u64 i_maxbrst:10;
+		u64 i_rsvd:22;
+
+	} ii_ilcsr_fld_s;
+} ii_ilcsr_u_t;
+
+/************************************************************************
+ *									*
+ *  This is simply a status registers that monitors the LLP error       *
+ * rate.								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_illr_u {
+	u64 ii_illr_regval;
+	struct {
+		u64 i_sn_cnt:16;
+		u64 i_cb_cnt:16;
+		u64 i_rsvd:32;
+	} ii_illr_fld_s;
+} ii_illr_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  All II-detected non-BTE error interrupts are           *
+ * specified via this register.                                         *
+ * NOTE: The PI interrupt register address is hardcoded in the II. If   *
+ * PI_ID==0, then the II sends an interrupt request (Duplonet PWRI      *
+ * packet) to address offset 0x0180_0090 within the local register      *
+ * address space of PI0 on the node specified by the NODE field. If     *
+ * PI_ID==1, then the II sends the interrupt request to address         *
+ * offset 0x01A0_0090 within the local register address space of PI1    *
+ * on the node specified by the NODE field.                             *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iidsr_u {
+	u64 ii_iidsr_regval;
+	struct {
+		u64 i_level:8;
+		u64 i_pi_id:1;
+		u64 i_node:11;
+		u64 i_rsvd_3:4;
+		u64 i_enable:1;
+		u64 i_rsvd_2:3;
+		u64 i_int_sent:2;
+		u64 i_rsvd_1:2;
+		u64 i_pi0_forward_int:1;
+		u64 i_pi1_forward_int:1;
+		u64 i_rsvd:30;
+	} ii_iidsr_fld_s;
+} ii_iidsr_u_t;
+
+/************************************************************************
+ *									*
+ *  There are two instances of this register. This register is used     *
+ * for matching up the incoming responses from the graphics widget to   *
+ * the processor that initiated the graphics operation. The             *
+ * write-responses are converted to graphics credits and returned to    *
+ * the processor so that the processor interface can manage the flow    *
+ * control.                                                             *
+ *									*
+ ************************************************************************/
+
+typedef union ii_igfx0_u {
+	u64 ii_igfx0_regval;
+	struct {
+		u64 i_w_num:4;
+		u64 i_pi_id:1;
+		u64 i_n_num:12;
+		u64 i_p_num:1;
+		u64 i_rsvd:46;
+	} ii_igfx0_fld_s;
+} ii_igfx0_u_t;
+
+/************************************************************************
+ *									*
+ *  There are two instances of this register. This register is used     *
+ * for matching up the incoming responses from the graphics widget to   *
+ * the processor that initiated the graphics operation. The             *
+ * write-responses are converted to graphics credits and returned to    *
+ * the processor so that the processor interface can manage the flow    *
+ * control.                                                             *
+ *									*
+ ************************************************************************/
+
+typedef union ii_igfx1_u {
+	u64 ii_igfx1_regval;
+	struct {
+		u64 i_w_num:4;
+		u64 i_pi_id:1;
+		u64 i_n_num:12;
+		u64 i_p_num:1;
+		u64 i_rsvd:46;
+	} ii_igfx1_fld_s;
+} ii_igfx1_u_t;
+
+/************************************************************************
+ *									*
+ *  There are two instances of this registers. These registers are      *
+ * used as scratch registers for software use.                          *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iscr0_u {
+	u64 ii_iscr0_regval;
+	struct {
+		u64 i_scratch:64;
+	} ii_iscr0_fld_s;
+} ii_iscr0_u_t;
+
+/************************************************************************
+ *									*
+ *  There are two instances of this registers. These registers are      *
+ * used as scratch registers for software use.                          *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iscr1_u {
+	u64 ii_iscr1_regval;
+	struct {
+		u64 i_scratch:64;
+	} ii_iscr1_fld_s;
+} ii_iscr1_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the SHub is thus the lower 16 GBytes per widget       * 
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the Shub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_itte1_u {
+	u64 ii_itte1_regval;
+	struct {
+		u64 i_offset:5;
+		u64 i_rsvd_1:3;
+		u64 i_w_num:4;
+		u64 i_iosp:1;
+		u64 i_rsvd:51;
+	} ii_itte1_fld_s;
+} ii_itte1_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the Shub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_itte2_u {
+	u64 ii_itte2_regval;
+	struct {
+		u64 i_offset:5;
+		u64 i_rsvd_1:3;
+		u64 i_w_num:4;
+		u64 i_iosp:1;
+		u64 i_rsvd:51;
+	} ii_itte2_fld_s;
+} ii_itte2_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the SHub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_itte3_u {
+	u64 ii_itte3_regval;
+	struct {
+		u64 i_offset:5;
+		u64 i_rsvd_1:3;
+		u64 i_w_num:4;
+		u64 i_iosp:1;
+		u64 i_rsvd:51;
+	} ii_itte3_fld_s;
+} ii_itte3_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a SHub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the SHub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the SHub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_itte4_u {
+	u64 ii_itte4_regval;
+	struct {
+		u64 i_offset:5;
+		u64 i_rsvd_1:3;
+		u64 i_w_num:4;
+		u64 i_iosp:1;
+		u64 i_rsvd:51;
+	} ii_itte4_fld_s;
+} ii_itte4_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a SHub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the Shub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_itte5_u {
+	u64 ii_itte5_regval;
+	struct {
+		u64 i_offset:5;
+		u64 i_rsvd_1:3;
+		u64 i_w_num:4;
+		u64 i_iosp:1;
+		u64 i_rsvd:51;
+	} ii_itte5_fld_s;
+} ii_itte5_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the Shub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_itte6_u {
+	u64 ii_itte6_regval;
+	struct {
+		u64 i_offset:5;
+		u64 i_rsvd_1:3;
+		u64 i_w_num:4;
+		u64 i_iosp:1;
+		u64 i_rsvd:51;
+	} ii_itte6_fld_s;
+} ii_itte6_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are seven instances of translation table entry   *
+ * registers. Each register maps a Shub Big Window to a 48-bit          *
+ * address on Crosstalk.                                                *
+ * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window      *
+ * number) are used to select one of these 7 registers. The Widget      *
+ * number field is then derived from the W_NUM field for synthesizing   *
+ * a Crosstalk packet. The 5 bits of OFFSET are concatenated with       *
+ * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34]      *
+ * are padded with zeros. Although the maximum Crosstalk space          *
+ * addressable by the Shub is thus the lower 16 GBytes per widget       *
+ * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this       *
+ * space can be accessed.                                               *
+ * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big         *
+ * Window number) are used to select one of these 7 registers. The      *
+ * Widget number field is then derived from the W_NUM field for         *
+ * synthesizing a Crosstalk packet. The 5 bits of OFFSET are            *
+ * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP      *
+ * field is used as Crosstalk[47], and remainder of the Crosstalk       *
+ * address bits (Crosstalk[46:34]) are always zero. While the maximum   *
+ * Crosstalk space addressable by the SHub is thus the lower            *
+ * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB>   *
+ * of this space can be accessed.                                       *
+ *									*
+ ************************************************************************/
+
+typedef union ii_itte7_u {
+	u64 ii_itte7_regval;
+	struct {
+		u64 i_offset:5;
+		u64 i_rsvd_1:3;
+		u64 i_w_num:4;
+		u64 i_iosp:1;
+		u64 i_rsvd:51;
+	} ii_itte7_fld_s;
+} ii_itte7_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .    								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprb0_u {
+	u64 ii_iprb0_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprb0_fld_s;
+} ii_iprb0_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .    								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprb8_u {
+	u64 ii_iprb8_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprb8_fld_s;
+} ii_iprb8_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .    								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprb9_u {
+	u64 ii_iprb9_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprb9_fld_s;
+} ii_iprb9_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.        *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ *									*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprba_u {
+	u64 ii_iprba_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprba_fld_s;
+} ii_iprba_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .    								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprbb_u {
+	u64 ii_iprbb_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprbb_fld_s;
+} ii_iprbb_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .    								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprbc_u {
+	u64 ii_iprbc_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprbc_fld_s;
+} ii_iprbc_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .    								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprbd_u {
+	u64 ii_iprbd_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprbd_fld_s;
+} ii_iprbd_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of SHub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .    								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprbe_u {
+	u64 ii_iprbe_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprbe_fld_s;
+} ii_iprbe_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 9 instances of this register, one per        *
+ * actual widget in this implementation of Shub and Crossbow.           *
+ * Note: Crossbow only has ports for Widgets 8 through F, widget 0      *
+ * refers to Crossbow's internal space.                                 *
+ * This register contains the state elements per widget that are        *
+ * necessary to manage the PIO flow control on Crosstalk and on the     *
+ * Router Network. See the PIO Flow Control chapter for a complete      *
+ * description of this register                                         *
+ * The SPUR_WR bit requires some explanation. When this register is     *
+ * written, the new value of the C field is captured in an internal     *
+ * register so the hardware can remember what the programmer wrote      *
+ * into the credit counter. The SPUR_WR bit sets whenever the C field   *
+ * increments above this stored value, which indicates that there       *
+ * have been more responses received than requests sent. The SPUR_WR    *
+ * bit cannot be cleared until a value is written to the IPRBx          *
+ * register; the write will correct the C field and capture its new     *
+ * value in the internal register. Even if IECLR[E_PRB_x] is set, the   *
+ * SPUR_WR bit will persist if IPRBx hasn't yet been written.           *
+ * .    								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprbf_u {
+	u64 ii_iprbf_regval;
+	struct {
+		u64 i_c:8;
+		u64 i_na:14;
+		u64 i_rsvd_2:2;
+		u64 i_nb:14;
+		u64 i_rsvd_1:2;
+		u64 i_m:2;
+		u64 i_f:1;
+		u64 i_of_cnt:5;
+		u64 i_error:1;
+		u64 i_rd_to:1;
+		u64 i_spur_wr:1;
+		u64 i_spur_rd:1;
+		u64 i_rsvd:11;
+		u64 i_mult_err:1;
+	} ii_iprbe_fld_s;
+} ii_iprbf_u_t;
+
+/************************************************************************
+ *									*
+ *  This register specifies the timeout value to use for monitoring     *
+ * Crosstalk credits which are used outbound to Crosstalk. An           *
+ * internal counter called the Crosstalk Credit Timeout Counter         *
+ * increments every 128 II clocks. The counter starts counting          *
+ * anytime the credit count drops below a threshold, and resets to      *
+ * zero (stops counting) anytime the credit count is at or above the    *
+ * threshold. The threshold is 1 credit in direct connect mode and 2    *
+ * in Crossbow connect mode. When the internal Crosstalk Credit         *
+ * Timeout Counter reaches the value programmed in this register, a     *
+ * Crosstalk Credit Timeout has occurred. The internal counter is not   *
+ * readable from software, and stops counting at its maximum value,     *
+ * so it cannot cause more than one interrupt.                          *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ixcc_u {
+	u64 ii_ixcc_regval;
+	struct {
+		u64 i_time_out:26;
+		u64 i_rsvd:38;
+	} ii_ixcc_fld_s;
+} ii_ixcc_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  This register qualifies all the PIO and DMA            *
+ * operations launched from widget 0 towards the SHub. In               *
+ * addition, it also qualifies accesses by the BTE streams.             *
+ * The bits in each field of this register are cleared by the SHub      *
+ * upon detection of an error which requires widget 0 or the BTE        *
+ * streams to be terminated. Whether or not widget x has access         *
+ * rights to this SHub is determined by an AND of the device            *
+ * enable bit in the appropriate field of this register and bit 0 in    *
+ * the Wx_IAC field. The bits in this field are set by writing a 1 to   *
+ * them. Incoming replies from Crosstalk are not subject to this        *
+ * access control mechanism.                                            *
+ *									*
+ ************************************************************************/
+
+typedef union ii_imem_u {
+	u64 ii_imem_regval;
+	struct {
+		u64 i_w0_esd:1;
+		u64 i_rsvd_3:3;
+		u64 i_b0_esd:1;
+		u64 i_rsvd_2:3;
+		u64 i_b1_esd:1;
+		u64 i_rsvd_1:3;
+		u64 i_clr_precise:1;
+		u64 i_rsvd:51;
+	} ii_imem_fld_s;
+} ii_imem_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  This register specifies the timeout value to use for   *
+ * monitoring Crosstalk tail flits coming into the Shub in the          *
+ * TAIL_TO field. An internal counter associated with this register     *
+ * is incremented every 128 II internal clocks (7 bits). The counter    *
+ * starts counting anytime a header micropacket is received and stops   *
+ * counting (and resets to zero) any time a micropacket with a Tail     *
+ * bit is received. Once the counter reaches the threshold value        *
+ * programmed in this register, it generates an interrupt to the        *
+ * processor that is programmed into the IIDSR. The counter saturates   *
+ * (does not roll over) at its maximum value, so it cannot cause        *
+ * another interrupt until after it is cleared.                         *
+ * The register also contains the Read Response Timeout values. The     *
+ * Prescalar is 23 bits, and counts II clocks. An internal counter      *
+ * increments on every II clock and when it reaches the value in the    *
+ * Prescalar field, all IPRTE registers with their valid bits set       *
+ * have their Read Response timers bumped. Whenever any of them match   *
+ * the value in the RRSP_TO field, a Read Response Timeout has          *
+ * occurred, and error handling occurs as described in the Error        *
+ * Handling section of this document.                                   *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ixtt_u {
+	u64 ii_ixtt_regval;
+	struct {
+		u64 i_tail_to:26;
+		u64 i_rsvd_1:6;
+		u64 i_rrsp_ps:23;
+		u64 i_rrsp_to:5;
+		u64 i_rsvd:4;
+	} ii_ixtt_fld_s;
+} ii_ixtt_u_t;
+
+/************************************************************************
+ *									*
+ *  Writing a 1 to the fields of this register clears the appropriate   *
+ * error bits in other areas of SHub. Note that when the                *
+ * E_PRB_x bits are used to clear error bits in PRB registers,          *
+ * SPUR_RD and SPUR_WR may persist, because they require additional     *
+ * action to clear them. See the IPRBx and IXSS Register                *
+ * specifications.                                                      *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ieclr_u {
+	u64 ii_ieclr_regval;
+	struct {
+		u64 i_e_prb_0:1;
+		u64 i_rsvd:7;
+		u64 i_e_prb_8:1;
+		u64 i_e_prb_9:1;
+		u64 i_e_prb_a:1;
+		u64 i_e_prb_b:1;
+		u64 i_e_prb_c:1;
+		u64 i_e_prb_d:1;
+		u64 i_e_prb_e:1;
+		u64 i_e_prb_f:1;
+		u64 i_e_crazy:1;
+		u64 i_e_bte_0:1;
+		u64 i_e_bte_1:1;
+		u64 i_reserved_1:10;
+		u64 i_spur_rd_hdr:1;
+		u64 i_cam_intr_to:1;
+		u64 i_cam_overflow:1;
+		u64 i_cam_read_miss:1;
+		u64 i_ioq_rep_underflow:1;
+		u64 i_ioq_req_underflow:1;
+		u64 i_ioq_rep_overflow:1;
+		u64 i_ioq_req_overflow:1;
+		u64 i_iiq_rep_overflow:1;
+		u64 i_iiq_req_overflow:1;
+		u64 i_ii_xn_rep_cred_overflow:1;
+		u64 i_ii_xn_req_cred_overflow:1;
+		u64 i_ii_xn_invalid_cmd:1;
+		u64 i_xn_ii_invalid_cmd:1;
+		u64 i_reserved_2:21;
+	} ii_ieclr_fld_s;
+} ii_ieclr_u_t;
+
+/************************************************************************
+ *									*
+ *  This register controls both BTEs. SOFT_RESET is intended for        *
+ * recovery after an error. COUNT controls the total number of CRBs     *
+ * that both BTEs (combined) can use, which affects total BTE           *
+ * bandwidth.                                                           *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibcr_u {
+	u64 ii_ibcr_regval;
+	struct {
+		u64 i_count:4;
+		u64 i_rsvd_1:4;
+		u64 i_soft_reset:1;
+		u64 i_rsvd:55;
+	} ii_ibcr_fld_s;
+} ii_ibcr_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the header of a spurious read response       *
+ * received from Crosstalk. A spurious read response is defined as a    *
+ * read response received by II from a widget for which (1) the SIDN    *
+ * has a value between 1 and 7, inclusive (II never sends requests to   *
+ * these widgets (2) there is no valid IPRTE register which             *
+ * corresponds to the TNUM, or (3) the widget indicated in SIDN is      *
+ * not the same as the widget recorded in the IPRTE register            *
+ * referenced by the TNUM. If this condition is true, and if the        *
+ * IXSS[VALID] bit is clear, then the header of the spurious read       *
+ * response is capture in IXSM and IXSS, and IXSS[VALID] is set. The    *
+ * errant header is thereby captured, and no further spurious read      *
+ * respones are captured until IXSS[VALID] is cleared by setting the    *
+ * appropriate bit in IECLR.Everytime a spurious read response is       *
+ * detected, the SPUR_RD bit of the PRB corresponding to the incoming   *
+ * message's SIDN field is set. This always happens, regarless of       *
+ * whether a header is captured. The programmer should check            *
+ * IXSM[SIDN] to determine which widget sent the spurious response,     *
+ * because there may be more than one SPUR_RD bit set in the PRB        *
+ * registers. The widget indicated by IXSM[SIDN] was the first          *
+ * spurious read response to be received since the last time            *
+ * IXSS[VALID] was clear. The SPUR_RD bit of the corresponding PRB      *
+ * will be set. Any SPUR_RD bits in any other PRB registers indicate    *
+ * spurious messages from other widets which were detected after the    *
+ * header was captured..                                                *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ixsm_u {
+	u64 ii_ixsm_regval;
+	struct {
+		u64 i_byte_en:32;
+		u64 i_reserved:1;
+		u64 i_tag:3;
+		u64 i_alt_pactyp:4;
+		u64 i_bo:1;
+		u64 i_error:1;
+		u64 i_vbpm:1;
+		u64 i_gbr:1;
+		u64 i_ds:2;
+		u64 i_ct:1;
+		u64 i_tnum:5;
+		u64 i_pactyp:4;
+		u64 i_sidn:4;
+		u64 i_didn:4;
+	} ii_ixsm_fld_s;
+} ii_ixsm_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the sideband bits of a spurious read         *
+ * response received from Crosstalk.                                    *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ixss_u {
+	u64 ii_ixss_regval;
+	struct {
+		u64 i_sideband:8;
+		u64 i_rsvd:55;
+		u64 i_valid:1;
+	} ii_ixss_fld_s;
+} ii_ixss_u_t;
+
+/************************************************************************
+ *									*
+ *  This register enables software to access the II LLP's test port.    *
+ * Refer to the LLP 2.5 documentation for an explanation of the test    *
+ * port. Software can write to this register to program the values      *
+ * for the control fields (TestErrCapture, TestClear, TestFlit,         *
+ * TestMask and TestSeed). Similarly, software can read from this       *
+ * register to obtain the values of the test port's status outputs      *
+ * (TestCBerr, TestValid and TestData).                                 *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ilct_u {
+	u64 ii_ilct_regval;
+	struct {
+		u64 i_test_seed:20;
+		u64 i_test_mask:8;
+		u64 i_test_data:20;
+		u64 i_test_valid:1;
+		u64 i_test_cberr:1;
+		u64 i_test_flit:3;
+		u64 i_test_clear:1;
+		u64 i_test_err_capture:1;
+		u64 i_rsvd:9;
+	} ii_ilct_fld_s;
+} ii_ilct_u_t;
+
+/************************************************************************
+ *									*
+ *  If the II detects an illegal incoming Duplonet packet (request or   *
+ * reply) when VALID==0 in the IIEPH1 register, then it saves the       *
+ * contents of the packet's header flit in the IIEPH1 and IIEPH2        *
+ * registers, sets the VALID bit in IIEPH1, clears the OVERRUN bit,     *
+ * and assigns a value to the ERR_TYPE field which indicates the        *
+ * specific nature of the error. The II recognizes four different       *
+ * types of errors: short request packets (ERR_TYPE==2), short reply    *
+ * packets (ERR_TYPE==3), long request packets (ERR_TYPE==4) and long   *
+ * reply packets (ERR_TYPE==5). The encodings for these types of        *
+ * errors were chosen to be consistent with the same types of errors    *
+ * indicated by the ERR_TYPE field in the LB_ERROR_HDR1 register (in    *
+ * the LB unit). If the II detects an illegal incoming Duplonet         *
+ * packet when VALID==1 in the IIEPH1 register, then it merely sets     *
+ * the OVERRUN bit to indicate that a subsequent error has happened,    *
+ * and does nothing further.                                            *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iieph1_u {
+	u64 ii_iieph1_regval;
+	struct {
+		u64 i_command:7;
+		u64 i_rsvd_5:1;
+		u64 i_suppl:14;
+		u64 i_rsvd_4:1;
+		u64 i_source:14;
+		u64 i_rsvd_3:1;
+		u64 i_err_type:4;
+		u64 i_rsvd_2:4;
+		u64 i_overrun:1;
+		u64 i_rsvd_1:3;
+		u64 i_valid:1;
+		u64 i_rsvd:13;
+	} ii_iieph1_fld_s;
+} ii_iieph1_u_t;
+
+/************************************************************************
+ *									*
+ *  This register holds the Address field from the header flit of an    *
+ * incoming erroneous Duplonet packet, along with the tail bit which    *
+ * accompanied this header flit. This register is essentially an        *
+ * extension of IIEPH1. Two registers were necessary because the 64     *
+ * bits available in only a single register were insufficient to        *
+ * capture the entire header flit of an erroneous packet.               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iieph2_u {
+	u64 ii_iieph2_regval;
+	struct {
+		u64 i_rsvd_0:3;
+		u64 i_address:47;
+		u64 i_rsvd_1:10;
+		u64 i_tail:1;
+		u64 i_rsvd:3;
+	} ii_iieph2_fld_s;
+} ii_iieph2_u_t;
+
+/******************************/
+
+/************************************************************************
+ *									*
+ *  This register's value is a bit vector that guards access from SXBs  *
+ * to local registers within the II as well as to external Crosstalk    *
+ * widgets								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_islapr_u {
+	u64 ii_islapr_regval;
+	struct {
+		u64 i_region:64;
+	} ii_islapr_fld_s;
+} ii_islapr_u_t;
+
+/************************************************************************
+ *									*
+ *  A write to this register of the 56-bit value "Pup+Bun" will cause	*
+ * the bit in the ISLAPR register corresponding to the region of the	*
+ * requestor to be set (access allowed).				(
+ *									*
+ ************************************************************************/
+
+typedef union ii_islapo_u {
+	u64 ii_islapo_regval;
+	struct {
+		u64 i_io_sbx_ovrride:56;
+		u64 i_rsvd:8;
+	} ii_islapo_fld_s;
+} ii_islapo_u_t;
+
+/************************************************************************
+ *									*
+ *  Determines how long the wrapper will wait aftr an interrupt is	*
+ * initially issued from the II before it times out the outstanding	*
+ * interrupt and drops it from the interrupt queue.			* 
+ *									*
+ ************************************************************************/
+
+typedef union ii_iwi_u {
+	u64 ii_iwi_regval;
+	struct {
+		u64 i_prescale:24;
+		u64 i_rsvd:8;
+		u64 i_timeout:8;
+		u64 i_rsvd1:8;
+		u64 i_intrpt_retry_period:8;
+		u64 i_rsvd2:8;
+	} ii_iwi_fld_s;
+} ii_iwi_u_t;
+
+/************************************************************************
+ *									*
+ *  Log errors which have occurred in the II wrapper. The errors are	*
+ * cleared by writing to the IECLR register.				* 
+ *									*
+ ************************************************************************/
+
+typedef union ii_iwel_u {
+	u64 ii_iwel_regval;
+	struct {
+		u64 i_intr_timed_out:1;
+		u64 i_rsvd:7;
+		u64 i_cam_overflow:1;
+		u64 i_cam_read_miss:1;
+		u64 i_rsvd1:2;
+		u64 i_ioq_rep_underflow:1;
+		u64 i_ioq_req_underflow:1;
+		u64 i_ioq_rep_overflow:1;
+		u64 i_ioq_req_overflow:1;
+		u64 i_iiq_rep_overflow:1;
+		u64 i_iiq_req_overflow:1;
+		u64 i_rsvd2:6;
+		u64 i_ii_xn_rep_cred_over_under:1;
+		u64 i_ii_xn_req_cred_over_under:1;
+		u64 i_rsvd3:6;
+		u64 i_ii_xn_invalid_cmd:1;
+		u64 i_xn_ii_invalid_cmd:1;
+		u64 i_rsvd4:30;
+	} ii_iwel_fld_s;
+} ii_iwel_u_t;
+
+/************************************************************************
+ *									*
+ *  Controls the II wrapper.						* 
+ *									*
+ ************************************************************************/
+
+typedef union ii_iwc_u {
+	u64 ii_iwc_regval;
+	struct {
+		u64 i_dma_byte_swap:1;
+		u64 i_rsvd:3;
+		u64 i_cam_read_lines_reset:1;
+		u64 i_rsvd1:3;
+		u64 i_ii_xn_cred_over_under_log:1;
+		u64 i_rsvd2:19;
+		u64 i_xn_rep_iq_depth:5;
+		u64 i_rsvd3:3;
+		u64 i_xn_req_iq_depth:5;
+		u64 i_rsvd4:3;
+		u64 i_iiq_depth:6;
+		u64 i_rsvd5:12;
+		u64 i_force_rep_cred:1;
+		u64 i_force_req_cred:1;
+	} ii_iwc_fld_s;
+} ii_iwc_u_t;
+
+/************************************************************************
+ *									*
+ *  Status in the II wrapper.						* 
+ *									*
+ ************************************************************************/
+
+typedef union ii_iws_u {
+	u64 ii_iws_regval;
+	struct {
+		u64 i_xn_rep_iq_credits:5;
+		u64 i_rsvd:3;
+		u64 i_xn_req_iq_credits:5;
+		u64 i_rsvd1:51;
+	} ii_iws_fld_s;
+} ii_iws_u_t;
+
+/************************************************************************
+ *									*
+ *  Masks errors in the IWEL register.					*
+ *									*
+ ************************************************************************/
+
+typedef union ii_iweim_u {
+	u64 ii_iweim_regval;
+	struct {
+		u64 i_intr_timed_out:1;
+		u64 i_rsvd:7;
+		u64 i_cam_overflow:1;
+		u64 i_cam_read_miss:1;
+		u64 i_rsvd1:2;
+		u64 i_ioq_rep_underflow:1;
+		u64 i_ioq_req_underflow:1;
+		u64 i_ioq_rep_overflow:1;
+		u64 i_ioq_req_overflow:1;
+		u64 i_iiq_rep_overflow:1;
+		u64 i_iiq_req_overflow:1;
+		u64 i_rsvd2:6;
+		u64 i_ii_xn_rep_cred_overflow:1;
+		u64 i_ii_xn_req_cred_overflow:1;
+		u64 i_rsvd3:6;
+		u64 i_ii_xn_invalid_cmd:1;
+		u64 i_xn_ii_invalid_cmd:1;
+		u64 i_rsvd4:30;
+	} ii_iweim_fld_s;
+} ii_iweim_u_t;
+
+/************************************************************************
+ *									*
+ *  A write to this register causes a particular field in the           *
+ * corresponding widget's PRB entry to be adjusted up or down by 1.     *
+ * This counter should be used when recovering from error and reset     *
+ * conditions. Note that software would be capable of causing           *
+ * inadvertent overflow or underflow of these counters.                 *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ipca_u {
+	u64 ii_ipca_regval;
+	struct {
+		u64 i_wid:4;
+		u64 i_adjust:1;
+		u64 i_rsvd_1:3;
+		u64 i_field:2;
+		u64 i_rsvd:54;
+	} ii_ipca_fld_s;
+} ii_ipca_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte0a_u {
+	u64 ii_iprte0a_regval;
+	struct {
+		u64 i_rsvd_1:54;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} ii_iprte0a_fld_s;
+} ii_iprte0a_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte1a_u {
+	u64 ii_iprte1a_regval;
+	struct {
+		u64 i_rsvd_1:54;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} ii_iprte1a_fld_s;
+} ii_iprte1a_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte2a_u {
+	u64 ii_iprte2a_regval;
+	struct {
+		u64 i_rsvd_1:54;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} ii_iprte2a_fld_s;
+} ii_iprte2a_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte3a_u {
+	u64 ii_iprte3a_regval;
+	struct {
+		u64 i_rsvd_1:54;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} ii_iprte3a_fld_s;
+} ii_iprte3a_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte4a_u {
+	u64 ii_iprte4a_regval;
+	struct {
+		u64 i_rsvd_1:54;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} ii_iprte4a_fld_s;
+} ii_iprte4a_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte5a_u {
+	u64 ii_iprte5a_regval;
+	struct {
+		u64 i_rsvd_1:54;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} ii_iprte5a_fld_s;
+} ii_iprte5a_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte6a_u {
+	u64 ii_iprte6a_regval;
+	struct {
+		u64 i_rsvd_1:54;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} ii_iprte6a_fld_s;
+} ii_iprte6a_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte7a_u {
+	u64 ii_iprte7a_regval;
+	struct {
+		u64 i_rsvd_1:54;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} ii_iprtea7_fld_s;
+} ii_iprte7a_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte0b_u {
+	u64 ii_iprte0b_regval;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_address:47;
+		u64 i_init:3;
+		u64 i_source:11;
+	} ii_iprte0b_fld_s;
+} ii_iprte0b_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte1b_u {
+	u64 ii_iprte1b_regval;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_address:47;
+		u64 i_init:3;
+		u64 i_source:11;
+	} ii_iprte1b_fld_s;
+} ii_iprte1b_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte2b_u {
+	u64 ii_iprte2b_regval;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_address:47;
+		u64 i_init:3;
+		u64 i_source:11;
+	} ii_iprte2b_fld_s;
+} ii_iprte2b_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte3b_u {
+	u64 ii_iprte3b_regval;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_address:47;
+		u64 i_init:3;
+		u64 i_source:11;
+	} ii_iprte3b_fld_s;
+} ii_iprte3b_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte4b_u {
+	u64 ii_iprte4b_regval;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_address:47;
+		u64 i_init:3;
+		u64 i_source:11;
+	} ii_iprte4b_fld_s;
+} ii_iprte4b_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte5b_u {
+	u64 ii_iprte5b_regval;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_address:47;
+		u64 i_init:3;
+		u64 i_source:11;
+	} ii_iprte5b_fld_s;
+} ii_iprte5b_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte6b_u {
+	u64 ii_iprte6b_regval;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_address:47;
+		u64 i_init:3;
+		u64 i_source:11;
+
+	} ii_iprte6b_fld_s;
+} ii_iprte6b_u_t;
+
+/************************************************************************
+ *									*
+ *  There are 8 instances of this register. This register contains      *
+ * the information that the II has to remember once it has launched a   *
+ * PIO Read operation. The contents are used to form the correct        *
+ * Router Network packet and direct the Crosstalk reply to the          *
+ * appropriate processor.                                               *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iprte7b_u {
+	u64 ii_iprte7b_regval;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_address:47;
+		u64 i_init:3;
+		u64 i_source:11;
+	} ii_iprte7b_fld_s;
+} ii_iprte7b_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  SHub II contains a feature which did not exist in      *
+ * the Hub which automatically cleans up after a Read Response          *
+ * timeout, including deallocation of the IPRTE and recovery of IBuf    *
+ * space. The inclusion of this register in SHub is for backward        *
+ * compatibility                                                        *
+ * A write to this register causes an entry from the table of           *
+ * outstanding PIO Read Requests to be freed and returned to the        *
+ * stack of free entries. This register is used in handling the         *
+ * timeout errors that result in a PIO Reply never returning from       *
+ * Crosstalk.                                                           *
+ * Note that this register does not affect the contents of the IPRTE    *
+ * registers. The Valid bits in those registers have to be              *
+ * specifically turned off by software.                                 *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ipdr_u {
+	u64 ii_ipdr_regval;
+	struct {
+		u64 i_te:3;
+		u64 i_rsvd_1:1;
+		u64 i_pnd:1;
+		u64 i_init_rpcnt:1;
+		u64 i_rsvd:58;
+	} ii_ipdr_fld_s;
+} ii_ipdr_u_t;
+
+/************************************************************************
+ *									*
+ *  A write to this register causes a CRB entry to be returned to the   *
+ * queue of free CRBs. The entry should have previously been cleared    *
+ * (mark bit) via backdoor access to the pertinent CRB entry. This      *
+ * register is used in the last step of handling the errors that are    *
+ * captured and marked in CRB entries.  Briefly: 1) first error for     *
+ * DMA write from a particular device, and first error for a            *
+ * particular BTE stream, lead to a marked CRB entry, and processor     *
+ * interrupt, 2) software reads the error information captured in the   *
+ * CRB entry, and presumably takes some corrective action, 3)           *
+ * software clears the mark bit, and finally 4) software writes to      *
+ * the ICDR register to return the CRB entry to the list of free CRB    *
+ * entries.                                                             *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icdr_u {
+	u64 ii_icdr_regval;
+	struct {
+		u64 i_crb_num:4;
+		u64 i_pnd:1;
+		u64 i_rsvd:59;
+	} ii_icdr_fld_s;
+} ii_icdr_u_t;
+
+/************************************************************************
+ *									*
+ *  This register provides debug access to two FIFOs inside of II.      *
+ * Both IOQ_MAX* fields of this register contain the instantaneous      *
+ * depth (in units of the number of available entries) of the           *
+ * associated IOQ FIFO.  A read of this register will return the        *
+ * number of free entries on each FIFO at the time of the read.  So     *
+ * when a FIFO is idle, the associated field contains the maximum       *
+ * depth of the FIFO.  This register is writable for debug reasons      *
+ * and is intended to be written with the maximum desired FIFO depth    *
+ * while the FIFO is idle. Software must assure that II is idle when    *
+ * this register is written. If there are any active entries in any     *
+ * of these FIFOs when this register is written, the results are        *
+ * undefined.                                                           *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ifdr_u {
+	u64 ii_ifdr_regval;
+	struct {
+		u64 i_ioq_max_rq:7;
+		u64 i_set_ioq_rq:1;
+		u64 i_ioq_max_rp:7;
+		u64 i_set_ioq_rp:1;
+		u64 i_rsvd:48;
+	} ii_ifdr_fld_s;
+} ii_ifdr_u_t;
+
+/************************************************************************
+ *									*
+ *  This register allows the II to become sluggish in removing          *
+ * messages from its inbound queue (IIQ). This will cause messages to   *
+ * back up in either virtual channel. Disabling the "molasses" mode     *
+ * subsequently allows the II to be tested under stress. In the         *
+ * sluggish ("Molasses") mode, the localized effects of congestion      *
+ * can be observed.                                                     *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iiap_u {
+	u64 ii_iiap_regval;
+	struct {
+		u64 i_rq_mls:6;
+		u64 i_rsvd_1:2;
+		u64 i_rp_mls:6;
+		u64 i_rsvd:50;
+	} ii_iiap_fld_s;
+} ii_iiap_u_t;
+
+/************************************************************************
+ *									*
+ *  This register allows several parameters of CRB operation to be      *
+ * set. Note that writing to this register can have catastrophic side   *
+ * effects, if the CRB is not quiescent, i.e. if the CRB is             *
+ * processing protocol messages when the write occurs.                  *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icmr_u {
+	u64 ii_icmr_regval;
+	struct {
+		u64 i_sp_msg:1;
+		u64 i_rd_hdr:1;
+		u64 i_rsvd_4:2;
+		u64 i_c_cnt:4;
+		u64 i_rsvd_3:4;
+		u64 i_clr_rqpd:1;
+		u64 i_clr_rppd:1;
+		u64 i_rsvd_2:2;
+		u64 i_fc_cnt:4;
+		u64 i_crb_vld:15;
+		u64 i_crb_mark:15;
+		u64 i_rsvd_1:2;
+		u64 i_precise:1;
+		u64 i_rsvd:11;
+	} ii_icmr_fld_s;
+} ii_icmr_u_t;
+
+/************************************************************************
+ *									*
+ *  This register allows control of the table portion of the CRB        *
+ * logic via software. Control operations from this register have       *
+ * priority over all incoming Crosstalk or BTE requests.                *
+ *									*
+ ************************************************************************/
+
+typedef union ii_iccr_u {
+	u64 ii_iccr_regval;
+	struct {
+		u64 i_crb_num:4;
+		u64 i_rsvd_1:4;
+		u64 i_cmd:8;
+		u64 i_pending:1;
+		u64 i_rsvd:47;
+	} ii_iccr_fld_s;
+} ii_iccr_u_t;
+
+/************************************************************************
+ *									*
+ *  This register allows the maximum timeout value to be programmed.    *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icto_u {
+	u64 ii_icto_regval;
+	struct {
+		u64 i_timeout:8;
+		u64 i_rsvd:56;
+	} ii_icto_fld_s;
+} ii_icto_u_t;
+
+/************************************************************************
+ *									*
+ *  This register allows the timeout prescalar to be programmed. An     *
+ * internal counter is associated with this register. When the          *
+ * internal counter reaches the value of the PRESCALE field, the        *
+ * timer registers in all valid CRBs are incremented (CRBx_D[TIMEOUT]   *
+ * field). The internal counter resets to zero, and then continues      *
+ * counting.                                                            *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ictp_u {
+	u64 ii_ictp_regval;
+	struct {
+		u64 i_prescale:24;
+		u64 i_rsvd:40;
+	} ii_ictp_fld_s;
+} ii_ictp_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ * The CRB Entry registers can be conceptualized as rows and columns    *
+ * (illustrated in the table above). Each row contains the 4            *
+ * registers required for a single CRB Entry. The first doubleword      *
+ * (column) for each entry is labeled A, and the second doubleword      *
+ * (higher address) is labeled B, the third doubleword is labeled C,    *
+ * the fourth doubleword is labeled D and the fifth doubleword is       *
+ * labeled E. All CRB entries have their addresses on a quarter         *
+ * cacheline aligned boundary.                   *
+ * Upon reset, only the following fields are initialized: valid         *
+ * (VLD), priority count, timeout, timeout valid, and context valid.    *
+ * All other bits should be cleared by software before use (after       *
+ * recovering any potential error state from before the reset).         *
+ * The following four tables summarize the format for the four          *
+ * registers that are used for each ICRB# Entry.                        *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icrb0_a_u {
+	u64 ii_icrb0_a_regval;
+	struct {
+		u64 ia_iow:1;
+		u64 ia_vld:1;
+		u64 ia_addr:47;
+		u64 ia_tnum:5;
+		u64 ia_sidn:4;
+		u64 ia_rsvd:6;
+	} ii_icrb0_a_fld_s;
+} ii_icrb0_a_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icrb0_b_u {
+	u64 ii_icrb0_b_regval;
+	struct {
+		u64 ib_xt_err:1;
+		u64 ib_mark:1;
+		u64 ib_ln_uce:1;
+		u64 ib_errcode:3;
+		u64 ib_error:1;
+		u64 ib_stall__bte_1:1;
+		u64 ib_stall__bte_0:1;
+		u64 ib_stall__intr:1;
+		u64 ib_stall_ib:1;
+		u64 ib_intvn:1;
+		u64 ib_wb:1;
+		u64 ib_hold:1;
+		u64 ib_ack:1;
+		u64 ib_resp:1;
+		u64 ib_ack_cnt:11;
+		u64 ib_rsvd:7;
+		u64 ib_exc:5;
+		u64 ib_init:3;
+		u64 ib_imsg:8;
+		u64 ib_imsgtype:2;
+		u64 ib_use_old:1;
+		u64 ib_rsvd_1:11;
+	} ii_icrb0_b_fld_s;
+} ii_icrb0_b_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icrb0_c_u {
+	u64 ii_icrb0_c_regval;
+	struct {
+		u64 ic_source:15;
+		u64 ic_size:2;
+		u64 ic_ct:1;
+		u64 ic_bte_num:1;
+		u64 ic_gbr:1;
+		u64 ic_resprqd:1;
+		u64 ic_bo:1;
+		u64 ic_suppl:15;
+		u64 ic_rsvd:27;
+	} ii_icrb0_c_fld_s;
+} ii_icrb0_c_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icrb0_d_u {
+	u64 ii_icrb0_d_regval;
+	struct {
+		u64 id_pa_be:43;
+		u64 id_bte_op:1;
+		u64 id_pr_psc:4;
+		u64 id_pr_cnt:4;
+		u64 id_sleep:1;
+		u64 id_rsvd:11;
+	} ii_icrb0_d_fld_s;
+} ii_icrb0_d_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  There are 15 CRB Entries (ICRB0 to ICRBE) that are     *
+ * used for Crosstalk operations (both cacheline and partial            *
+ * operations) or BTE/IO. Because the CRB entries are very wide, five   *
+ * registers (_A to _E) are required to read and write each entry.      *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icrb0_e_u {
+	u64 ii_icrb0_e_regval;
+	struct {
+		u64 ie_timeout:8;
+		u64 ie_context:15;
+		u64 ie_rsvd:1;
+		u64 ie_tvld:1;
+		u64 ie_cvld:1;
+		u64 ie_rsvd_0:38;
+	} ii_icrb0_e_fld_s;
+} ii_icrb0_e_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the lower 64 bits of the header of the       *
+ * spurious message captured by II. Valid when the SP_MSG bit in ICMR   *
+ * register is set.                                                     *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icsml_u {
+	u64 ii_icsml_regval;
+	struct {
+		u64 i_tt_addr:47;
+		u64 i_newsuppl_ex:14;
+		u64 i_reserved:2;
+		u64 i_overflow:1;
+	} ii_icsml_fld_s;
+} ii_icsml_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the middle 64 bits of the header of the      *
+ * spurious message captured by II. Valid when the SP_MSG bit in ICMR   *
+ * register is set.                                                     *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icsmm_u {
+	u64 ii_icsmm_regval;
+	struct {
+		u64 i_tt_ack_cnt:11;
+		u64 i_reserved:53;
+	} ii_icsmm_fld_s;
+} ii_icsmm_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the microscopic state, all the inputs to     *
+ * the protocol table, captured with the spurious message. Valid when   *
+ * the SP_MSG bit in the ICMR register is set.                          *
+ *									*
+ ************************************************************************/
+
+typedef union ii_icsmh_u {
+	u64 ii_icsmh_regval;
+	struct {
+		u64 i_tt_vld:1;
+		u64 i_xerr:1;
+		u64 i_ft_cwact_o:1;
+		u64 i_ft_wact_o:1;
+		u64 i_ft_active_o:1;
+		u64 i_sync:1;
+		u64 i_mnusg:1;
+		u64 i_mnusz:1;
+		u64 i_plusz:1;
+		u64 i_plusg:1;
+		u64 i_tt_exc:5;
+		u64 i_tt_wb:1;
+		u64 i_tt_hold:1;
+		u64 i_tt_ack:1;
+		u64 i_tt_resp:1;
+		u64 i_tt_intvn:1;
+		u64 i_g_stall_bte1:1;
+		u64 i_g_stall_bte0:1;
+		u64 i_g_stall_il:1;
+		u64 i_g_stall_ib:1;
+		u64 i_tt_imsg:8;
+		u64 i_tt_imsgtype:2;
+		u64 i_tt_use_old:1;
+		u64 i_tt_respreqd:1;
+		u64 i_tt_bte_num:1;
+		u64 i_cbn:1;
+		u64 i_match:1;
+		u64 i_rpcnt_lt_34:1;
+		u64 i_rpcnt_ge_34:1;
+		u64 i_rpcnt_lt_18:1;
+		u64 i_rpcnt_ge_18:1;
+		u64 i_rpcnt_lt_2:1;
+		u64 i_rpcnt_ge_2:1;
+		u64 i_rqcnt_lt_18:1;
+		u64 i_rqcnt_ge_18:1;
+		u64 i_rqcnt_lt_2:1;
+		u64 i_rqcnt_ge_2:1;
+		u64 i_tt_device:7;
+		u64 i_tt_init:3;
+		u64 i_reserved:5;
+	} ii_icsmh_fld_s;
+} ii_icsmh_u_t;
+
+/************************************************************************
+ *									*
+ *  The Shub DEBUG unit provides a 3-bit selection signal to the        *
+ * II core and a 3-bit selection signal to the fsbclk domain in the II  *
+ * wrapper.                                                             *
+ *									*
+ ************************************************************************/
+
+typedef union ii_idbss_u {
+	u64 ii_idbss_regval;
+	struct {
+		u64 i_iioclk_core_submenu:3;
+		u64 i_rsvd:5;
+		u64 i_fsbclk_wrapper_submenu:3;
+		u64 i_rsvd_1:5;
+		u64 i_iioclk_menu:5;
+		u64 i_rsvd_2:43;
+	} ii_idbss_fld_s;
+} ii_idbss_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  This register is used to set up the length for a       *
+ * transfer and then to monitor the progress of that transfer. This     *
+ * register needs to be initialized before a transfer is started. A     *
+ * legitimate write to this register will set the Busy bit, clear the   *
+ * Error bit, and initialize the length to the value desired.           *
+ * While the transfer is in progress, hardware will decrement the       *
+ * length field with each successful block that is copied. Once the     *
+ * transfer completes, hardware will clear the Busy bit. The length     *
+ * field will also contain the number of cache lines left to be         *
+ * transferred.                                                         *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibls0_u {
+	u64 ii_ibls0_regval;
+	struct {
+		u64 i_length:16;
+		u64 i_error:1;
+		u64 i_rsvd_1:3;
+		u64 i_busy:1;
+		u64 i_rsvd:43;
+	} ii_ibls0_fld_s;
+} ii_ibls0_u_t;
+
+/************************************************************************
+ *									*
+ *  This register should be loaded before a transfer is started. The    *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
+ * address as described in Section 1.3, Figure2 and Figure3. Since      *
+ * the bottom 7 bits of the address are always taken to be zero, BTE    *
+ * transfers are always cacheline-aligned.                              *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibsa0_u {
+	u64 ii_ibsa0_regval;
+	struct {
+		u64 i_rsvd_1:7;
+		u64 i_addr:42;
+		u64 i_rsvd:15;
+	} ii_ibsa0_fld_s;
+} ii_ibsa0_u_t;
+
+/************************************************************************
+ *									*
+ *  This register should be loaded before a transfer is started. The    *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
+ * address as described in Section 1.3, Figure2 and Figure3. Since      *
+ * the bottom 7 bits of the address are always taken to be zero, BTE    *
+ * transfers are always cacheline-aligned.                              *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibda0_u {
+	u64 ii_ibda0_regval;
+	struct {
+		u64 i_rsvd_1:7;
+		u64 i_addr:42;
+		u64 i_rsvd:15;
+	} ii_ibda0_fld_s;
+} ii_ibda0_u_t;
+
+/************************************************************************
+ *									*
+ *  Writing to this register sets up the attributes of the transfer     *
+ * and initiates the transfer operation. Reading this register has      *
+ * the side effect of terminating any transfer in progress. Note:       *
+ * stopping a transfer midstream could have an adverse impact on the    *
+ * other BTE. If a BTE stream has to be stopped (due to error           *
+ * handling for example), both BTE streams should be stopped and        *
+ * their transfers discarded.                                           *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibct0_u {
+	u64 ii_ibct0_regval;
+	struct {
+		u64 i_zerofill:1;
+		u64 i_rsvd_2:3;
+		u64 i_notify:1;
+		u64 i_rsvd_1:3;
+		u64 i_poison:1;
+		u64 i_rsvd:55;
+	} ii_ibct0_fld_s;
+} ii_ibct0_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the address to which the WINV is sent.       *
+ * This address has to be cache line aligned.                           *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibna0_u {
+	u64 ii_ibna0_regval;
+	struct {
+		u64 i_rsvd_1:7;
+		u64 i_addr:42;
+		u64 i_rsvd:15;
+	} ii_ibna0_fld_s;
+} ii_ibna0_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the programmable level as well as the node   *
+ * ID and PI unit of the processor to which the interrupt will be       *
+ * sent.								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibia0_u {
+	u64 ii_ibia0_regval;
+	struct {
+		u64 i_rsvd_2:1;
+		u64 i_node_id:11;
+		u64 i_rsvd_1:4;
+		u64 i_level:7;
+		u64 i_rsvd:41;
+	} ii_ibia0_fld_s;
+} ii_ibia0_u_t;
+
+/************************************************************************
+ *									*
+ * Description:  This register is used to set up the length for a       *
+ * transfer and then to monitor the progress of that transfer. This     *
+ * register needs to be initialized before a transfer is started. A     *
+ * legitimate write to this register will set the Busy bit, clear the   *
+ * Error bit, and initialize the length to the value desired.           *
+ * While the transfer is in progress, hardware will decrement the       *
+ * length field with each successful block that is copied. Once the     *
+ * transfer completes, hardware will clear the Busy bit. The length     *
+ * field will also contain the number of cache lines left to be         *
+ * transferred.                                                         *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibls1_u {
+	u64 ii_ibls1_regval;
+	struct {
+		u64 i_length:16;
+		u64 i_error:1;
+		u64 i_rsvd_1:3;
+		u64 i_busy:1;
+		u64 i_rsvd:43;
+	} ii_ibls1_fld_s;
+} ii_ibls1_u_t;
+
+/************************************************************************
+ *									*
+ *  This register should be loaded before a transfer is started. The    *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
+ * address as described in Section 1.3, Figure2 and Figure3. Since      *
+ * the bottom 7 bits of the address are always taken to be zero, BTE    *
+ * transfers are always cacheline-aligned.                              *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibsa1_u {
+	u64 ii_ibsa1_regval;
+	struct {
+		u64 i_rsvd_1:7;
+		u64 i_addr:33;
+		u64 i_rsvd:24;
+	} ii_ibsa1_fld_s;
+} ii_ibsa1_u_t;
+
+/************************************************************************
+ *									*
+ *  This register should be loaded before a transfer is started. The    *
+ * address to be loaded in bits 39:0 is the 40-bit TRex+ physical       *
+ * address as described in Section 1.3, Figure2 and Figure3. Since      *
+ * the bottom 7 bits of the address are always taken to be zero, BTE    *
+ * transfers are always cacheline-aligned.                              *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibda1_u {
+	u64 ii_ibda1_regval;
+	struct {
+		u64 i_rsvd_1:7;
+		u64 i_addr:33;
+		u64 i_rsvd:24;
+	} ii_ibda1_fld_s;
+} ii_ibda1_u_t;
+
+/************************************************************************
+ *									*
+ *  Writing to this register sets up the attributes of the transfer     *
+ * and initiates the transfer operation. Reading this register has      *
+ * the side effect of terminating any transfer in progress. Note:       *
+ * stopping a transfer midstream could have an adverse impact on the    *
+ * other BTE. If a BTE stream has to be stopped (due to error           *
+ * handling for example), both BTE streams should be stopped and        *
+ * their transfers discarded.                                           *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibct1_u {
+	u64 ii_ibct1_regval;
+	struct {
+		u64 i_zerofill:1;
+		u64 i_rsvd_2:3;
+		u64 i_notify:1;
+		u64 i_rsvd_1:3;
+		u64 i_poison:1;
+		u64 i_rsvd:55;
+	} ii_ibct1_fld_s;
+} ii_ibct1_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the address to which the WINV is sent.       *
+ * This address has to be cache line aligned.                           *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibna1_u {
+	u64 ii_ibna1_regval;
+	struct {
+		u64 i_rsvd_1:7;
+		u64 i_addr:33;
+		u64 i_rsvd:24;
+	} ii_ibna1_fld_s;
+} ii_ibna1_u_t;
+
+/************************************************************************
+ *									*
+ *  This register contains the programmable level as well as the node   *
+ * ID and PI unit of the processor to which the interrupt will be       *
+ * sent.								*
+ *									*
+ ************************************************************************/
+
+typedef union ii_ibia1_u {
+	u64 ii_ibia1_regval;
+	struct {
+		u64 i_pi_id:1;
+		u64 i_node_id:8;
+		u64 i_rsvd_1:7;
+		u64 i_level:7;
+		u64 i_rsvd:41;
+	} ii_ibia1_fld_s;
+} ii_ibia1_u_t;
+
+/************************************************************************
+ *									*
+ *  This register defines the resources that feed information into      *
+ * the two performance counters located in the IO Performance           *
+ * Profiling Register. There are 17 different quantities that can be    *
+ * measured. Given these 17 different options, the two performance      *
+ * counters have 15 of them in common; menu selections 0 through 0xE    *
+ * are identical for each performance counter. As for the other two     *
+ * options, one is available from one performance counter and the       *
+ * other is available from the other performance counter. Hence, the    *
+ * II supports all 17*16=272 possible combinations of quantities to     *
+ * measure.                                                             *
+ *									*
+ ************************************************************************/
+
+typedef union ii_ipcr_u {
+	u64 ii_ipcr_regval;
+	struct {
+		u64 i_ippr0_c:4;
+		u64 i_ippr1_c:4;
+		u64 i_icct:8;
+		u64 i_rsvd:48;
+	} ii_ipcr_fld_s;
+} ii_ipcr_u_t;
+
+/************************************************************************
+ *									*
+ *									*
+ *									*
+ ************************************************************************/
+
+typedef union ii_ippr_u {
+	u64 ii_ippr_regval;
+	struct {
+		u64 i_ippr0:32;
+		u64 i_ippr1:32;
+	} ii_ippr_fld_s;
+} ii_ippr_u_t;
+
+/************************************************************************
+ *									*
+ * The following defines which were not formed into structures are	*
+ * probably indentical to another register, and the name of the		*
+ * register is provided against each of these registers. This		*
+ * information needs to be checked carefully				*
+ *									*
+ *		IIO_ICRB1_A		IIO_ICRB0_A			*
+ *		IIO_ICRB1_B		IIO_ICRB0_B			*
+ *		IIO_ICRB1_C		IIO_ICRB0_C			*
+ *		IIO_ICRB1_D		IIO_ICRB0_D			*
+ *		IIO_ICRB1_E		IIO_ICRB0_E			*
+ *		IIO_ICRB2_A		IIO_ICRB0_A			*
+ *		IIO_ICRB2_B		IIO_ICRB0_B			*
+ *		IIO_ICRB2_C		IIO_ICRB0_C			*
+ *		IIO_ICRB2_D		IIO_ICRB0_D			*
+ *		IIO_ICRB2_E		IIO_ICRB0_E			*
+ *		IIO_ICRB3_A		IIO_ICRB0_A			*
+ *		IIO_ICRB3_B		IIO_ICRB0_B			*
+ *		IIO_ICRB3_C		IIO_ICRB0_C			*
+ *		IIO_ICRB3_D		IIO_ICRB0_D			*
+ *		IIO_ICRB3_E		IIO_ICRB0_E			*
+ *		IIO_ICRB4_A		IIO_ICRB0_A			*
+ *		IIO_ICRB4_B		IIO_ICRB0_B			*
+ *		IIO_ICRB4_C		IIO_ICRB0_C			*
+ *		IIO_ICRB4_D		IIO_ICRB0_D			*
+ *		IIO_ICRB4_E		IIO_ICRB0_E			*
+ *		IIO_ICRB5_A		IIO_ICRB0_A			*
+ *		IIO_ICRB5_B		IIO_ICRB0_B			*
+ *		IIO_ICRB5_C		IIO_ICRB0_C			*
+ *		IIO_ICRB5_D		IIO_ICRB0_D			*
+ *		IIO_ICRB5_E		IIO_ICRB0_E			*
+ *		IIO_ICRB6_A		IIO_ICRB0_A			*
+ *		IIO_ICRB6_B		IIO_ICRB0_B			*
+ *		IIO_ICRB6_C		IIO_ICRB0_C			*
+ *		IIO_ICRB6_D		IIO_ICRB0_D			*
+ *		IIO_ICRB6_E		IIO_ICRB0_E			*
+ *		IIO_ICRB7_A		IIO_ICRB0_A			*
+ *		IIO_ICRB7_B		IIO_ICRB0_B			*
+ *		IIO_ICRB7_C		IIO_ICRB0_C			*
+ *		IIO_ICRB7_D		IIO_ICRB0_D			*
+ *		IIO_ICRB7_E		IIO_ICRB0_E			*
+ *		IIO_ICRB8_A		IIO_ICRB0_A			*
+ *		IIO_ICRB8_B		IIO_ICRB0_B			*
+ *		IIO_ICRB8_C		IIO_ICRB0_C			*
+ *		IIO_ICRB8_D		IIO_ICRB0_D			*
+ *		IIO_ICRB8_E		IIO_ICRB0_E			*
+ *		IIO_ICRB9_A		IIO_ICRB0_A			*
+ *		IIO_ICRB9_B		IIO_ICRB0_B			*
+ *		IIO_ICRB9_C		IIO_ICRB0_C			*
+ *		IIO_ICRB9_D		IIO_ICRB0_D			*
+ *		IIO_ICRB9_E		IIO_ICRB0_E			*
+ *		IIO_ICRBA_A		IIO_ICRB0_A			*
+ *		IIO_ICRBA_B		IIO_ICRB0_B			*
+ *		IIO_ICRBA_C		IIO_ICRB0_C			*
+ *		IIO_ICRBA_D		IIO_ICRB0_D			*
+ *		IIO_ICRBA_E		IIO_ICRB0_E			*
+ *		IIO_ICRBB_A		IIO_ICRB0_A			*
+ *		IIO_ICRBB_B		IIO_ICRB0_B			*
+ *		IIO_ICRBB_C		IIO_ICRB0_C			*
+ *		IIO_ICRBB_D		IIO_ICRB0_D			*
+ *		IIO_ICRBB_E		IIO_ICRB0_E			*
+ *		IIO_ICRBC_A		IIO_ICRB0_A			*
+ *		IIO_ICRBC_B		IIO_ICRB0_B			*
+ *		IIO_ICRBC_C		IIO_ICRB0_C			*
+ *		IIO_ICRBC_D		IIO_ICRB0_D			*
+ *		IIO_ICRBC_E		IIO_ICRB0_E			*
+ *		IIO_ICRBD_A		IIO_ICRB0_A			*
+ *		IIO_ICRBD_B		IIO_ICRB0_B			*
+ *		IIO_ICRBD_C		IIO_ICRB0_C			*
+ *		IIO_ICRBD_D		IIO_ICRB0_D			*
+ *		IIO_ICRBD_E		IIO_ICRB0_E			*
+ *		IIO_ICRBE_A		IIO_ICRB0_A			*
+ *		IIO_ICRBE_B		IIO_ICRB0_B			*
+ *		IIO_ICRBE_C		IIO_ICRB0_C			*
+ *		IIO_ICRBE_D		IIO_ICRB0_D			*
+ *		IIO_ICRBE_E		IIO_ICRB0_E			*
+ *									*
+ ************************************************************************/
+
+/*
+ * Slightly friendlier names for some common registers.
+ */
+#define IIO_WIDGET              IIO_WID		/* Widget identification */
+#define IIO_WIDGET_STAT         IIO_WSTAT	/* Widget status register */
+#define IIO_WIDGET_CTRL         IIO_WCR		/* Widget control register */
+#define IIO_PROTECT             IIO_ILAPR	/* IO interface protection */
+#define IIO_PROTECT_OVRRD       IIO_ILAPO	/* IO protect override */
+#define IIO_OUTWIDGET_ACCESS    IIO_IOWA	/* Outbound widget access */
+#define IIO_INWIDGET_ACCESS     IIO_IIWA	/* Inbound widget access */
+#define IIO_INDEV_ERR_MASK      IIO_IIDEM	/* Inbound device error mask */
+#define IIO_LLP_CSR             IIO_ILCSR	/* LLP control and status */
+#define IIO_LLP_LOG             IIO_ILLR	/* LLP log */
+#define IIO_XTALKCC_TOUT        IIO_IXCC	/* Xtalk credit count timeout */
+#define IIO_XTALKTT_TOUT        IIO_IXTT	/* Xtalk tail timeout */
+#define IIO_IO_ERR_CLR          IIO_IECLR	/* IO error clear */
+#define IIO_IGFX_0 		IIO_IGFX0
+#define IIO_IGFX_1 		IIO_IGFX1
+#define IIO_IBCT_0		IIO_IBCT0
+#define IIO_IBCT_1		IIO_IBCT1
+#define IIO_IBLS_0		IIO_IBLS0
+#define IIO_IBLS_1		IIO_IBLS1
+#define IIO_IBSA_0		IIO_IBSA0
+#define IIO_IBSA_1		IIO_IBSA1
+#define IIO_IBDA_0		IIO_IBDA0
+#define IIO_IBDA_1		IIO_IBDA1
+#define IIO_IBNA_0		IIO_IBNA0
+#define IIO_IBNA_1		IIO_IBNA1
+#define IIO_IBIA_0		IIO_IBIA0
+#define IIO_IBIA_1		IIO_IBIA1
+#define IIO_IOPRB_0		IIO_IPRB0
+
+#define IIO_PRTE_A(_x)		(IIO_IPRTE0_A + (8 * (_x)))
+#define IIO_PRTE_B(_x)		(IIO_IPRTE0_B + (8 * (_x)))
+#define IIO_NUM_PRTES		8	/* Total number of PRB table entries */
+#define IIO_WIDPRTE_A(x)	IIO_PRTE_A(((x) - 8))	/* widget ID to its PRTE num */
+#define IIO_WIDPRTE_B(x)	IIO_PRTE_B(((x) - 8))	/* widget ID to its PRTE num */
+
+#define IIO_NUM_IPRBS 		9
+
+#define IIO_LLP_CSR_IS_UP		0x00002000
+#define IIO_LLP_CSR_LLP_STAT_MASK       0x00003000
+#define IIO_LLP_CSR_LLP_STAT_SHFT       12
+
+#define IIO_LLP_CB_MAX  0xffff	/* in ILLR CB_CNT, Max Check Bit errors */
+#define IIO_LLP_SN_MAX  0xffff	/* in ILLR SN_CNT, Max Sequence Number errors */
+
+/* key to IIO_PROTECT_OVRRD */
+#define IIO_PROTECT_OVRRD_KEY   0x53474972756c6573ull	/* "SGIrules" */
+
+/* BTE register names */
+#define IIO_BTE_STAT_0          IIO_IBLS_0	/* Also BTE length/status 0 */
+#define IIO_BTE_SRC_0           IIO_IBSA_0	/* Also BTE source address  0 */
+#define IIO_BTE_DEST_0          IIO_IBDA_0	/* Also BTE dest. address 0 */
+#define IIO_BTE_CTRL_0          IIO_IBCT_0	/* Also BTE control/terminate 0 */
+#define IIO_BTE_NOTIFY_0        IIO_IBNA_0	/* Also BTE notification 0 */
+#define IIO_BTE_INT_0           IIO_IBIA_0	/* Also BTE interrupt 0 */
+#define IIO_BTE_OFF_0           0	/* Base offset from BTE 0 regs. */
+#define IIO_BTE_OFF_1   	(IIO_IBLS_1 - IIO_IBLS_0)	/* Offset from base to BTE 1 */
+
+/* BTE register offsets from base */
+#define BTEOFF_STAT             0
+#define BTEOFF_SRC      	(IIO_BTE_SRC_0 - IIO_BTE_STAT_0)
+#define BTEOFF_DEST     	(IIO_BTE_DEST_0 - IIO_BTE_STAT_0)
+#define BTEOFF_CTRL     	(IIO_BTE_CTRL_0 - IIO_BTE_STAT_0)
+#define BTEOFF_NOTIFY   	(IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0)
+#define BTEOFF_INT      	(IIO_BTE_INT_0 - IIO_BTE_STAT_0)
+
+/* names used in shub diags */
+#define IIO_BASE_BTE0   IIO_IBLS_0
+#define IIO_BASE_BTE1   IIO_IBLS_1
+
+/*
+ * Macro which takes the widget number, and returns the
+ * IO PRB address of that widget.
+ * value _x is expected to be a widget number in the range
+ * 0, 8 - 0xF
+ */
+#define IIO_IOPRB(_x)	(IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \
+                	(_x) : \
+                	(_x) - (HUB_WIDGET_ID_MIN-1)) << 3) )
+
+/* GFX Flow Control Node/Widget Register */
+#define IIO_IGFX_W_NUM_BITS	4	/* size of widget num field */
+#define IIO_IGFX_W_NUM_MASK	((1<<IIO_IGFX_W_NUM_BITS)-1)
+#define IIO_IGFX_W_NUM_SHIFT	0
+#define IIO_IGFX_PI_NUM_BITS	1	/* size of PI num field */
+#define IIO_IGFX_PI_NUM_MASK	((1<<IIO_IGFX_PI_NUM_BITS)-1)
+#define IIO_IGFX_PI_NUM_SHIFT	4
+#define IIO_IGFX_N_NUM_BITS	8	/* size of node num field */
+#define IIO_IGFX_N_NUM_MASK	((1<<IIO_IGFX_N_NUM_BITS)-1)
+#define IIO_IGFX_N_NUM_SHIFT	5
+#define IIO_IGFX_P_NUM_BITS	1	/* size of processor num field */
+#define IIO_IGFX_P_NUM_MASK	((1<<IIO_IGFX_P_NUM_BITS)-1)
+#define IIO_IGFX_P_NUM_SHIFT	16
+#define IIO_IGFX_INIT(widget, pi, node, cpu)				(\
+	(((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) |	 \
+	(((pi)     & IIO_IGFX_PI_NUM_MASK)<< IIO_IGFX_PI_NUM_SHIFT)|	 \
+	(((node)   & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) |	 \
+	(((cpu)    & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT))
+
+/* Scratch registers (all bits available) */
+#define IIO_SCRATCH_REG0        IIO_ISCR0
+#define IIO_SCRATCH_REG1        IIO_ISCR1
+#define IIO_SCRATCH_MASK        0xffffffffffffffffUL
+
+#define IIO_SCRATCH_BIT0_0      0x0000000000000001UL
+#define IIO_SCRATCH_BIT0_1      0x0000000000000002UL
+#define IIO_SCRATCH_BIT0_2      0x0000000000000004UL
+#define IIO_SCRATCH_BIT0_3      0x0000000000000008UL
+#define IIO_SCRATCH_BIT0_4      0x0000000000000010UL
+#define IIO_SCRATCH_BIT0_5      0x0000000000000020UL
+#define IIO_SCRATCH_BIT0_6      0x0000000000000040UL
+#define IIO_SCRATCH_BIT0_7      0x0000000000000080UL
+#define IIO_SCRATCH_BIT0_8      0x0000000000000100UL
+#define IIO_SCRATCH_BIT0_9      0x0000000000000200UL
+#define IIO_SCRATCH_BIT0_A      0x0000000000000400UL
+
+#define IIO_SCRATCH_BIT1_0      0x0000000000000001UL
+#define IIO_SCRATCH_BIT1_1      0x0000000000000002UL
+/* IO Translation Table Entries */
+#define IIO_NUM_ITTES   7	/* ITTEs numbered 0..6 */
+					/* Hw manuals number them 1..7! */
+/*
+ * IIO_IMEM Register fields.
+ */
+#define IIO_IMEM_W0ESD  0x1UL	/* Widget 0 shut down due to error */
+#define IIO_IMEM_B0ESD	(1UL << 4)	/* BTE 0 shut down due to error */
+#define IIO_IMEM_B1ESD	(1UL << 8)	/* BTE 1 Shut down due to error */
+
+/*
+ * As a permanent workaround for a bug in the PI side of the shub, we've
+ * redefined big window 7 as small window 0.
+ XXX does this still apply for SN1??
+ */
+#define HUB_NUM_BIG_WINDOW	(IIO_NUM_ITTES - 1)
+
+/*
+ * Use the top big window as a surrogate for the first small window
+ */
+#define SWIN0_BIGWIN            HUB_NUM_BIG_WINDOW
+
+#define ILCSR_WARM_RESET        0x100
+
+/*
+ * CRB manipulation macros
+ *	The CRB macros are slightly complicated, since there are up to
+ *	four registers associated with each CRB entry.
+ */
+#define IIO_NUM_CRBS            15	/* Number of CRBs */
+#define IIO_NUM_PC_CRBS         4	/* Number of partial cache CRBs */
+#define IIO_ICRB_OFFSET         8
+#define IIO_ICRB_0              IIO_ICRB0_A
+#define IIO_ICRB_ADDR_SHFT	2	/* Shift to get proper address */
+/* XXX - This is now tuneable:
+        #define IIO_FIRST_PC_ENTRY 12
+ */
+
+#define IIO_ICRB_A(_x)	((u64)(IIO_ICRB_0 + (6 * IIO_ICRB_OFFSET * (_x))))
+#define IIO_ICRB_B(_x)	((u64)((char *)IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET))
+#define IIO_ICRB_C(_x)	((u64)((char *)IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET))
+#define IIO_ICRB_D(_x)	((u64)((char *)IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET))
+#define IIO_ICRB_E(_x)	((u64)((char *)IIO_ICRB_A(_x) + 4*IIO_ICRB_OFFSET))
+
+#define TNUM_TO_WIDGET_DEV(_tnum)	(_tnum & 0x7)
+
+/*
+ * values for "ecode" field
+ */
+#define IIO_ICRB_ECODE_DERR     0	/* Directory error due to IIO access */
+#define IIO_ICRB_ECODE_PERR     1	/* Poison error on IO access */
+#define IIO_ICRB_ECODE_WERR     2	/* Write error by IIO access
+					 * e.g. WINV to a Read only line. */
+#define IIO_ICRB_ECODE_AERR     3	/* Access error caused by IIO access */
+#define IIO_ICRB_ECODE_PWERR    4	/* Error on partial write */
+#define IIO_ICRB_ECODE_PRERR    5	/* Error on partial read  */
+#define IIO_ICRB_ECODE_TOUT     6	/* CRB timeout before deallocating */
+#define IIO_ICRB_ECODE_XTERR    7	/* Incoming xtalk pkt had error bit */
+
+/*
+ * Values for field imsgtype
+ */
+#define IIO_ICRB_IMSGT_XTALK    0	/* Incoming Meessage from Xtalk */
+#define IIO_ICRB_IMSGT_BTE      1	/* Incoming message from BTE    */
+#define IIO_ICRB_IMSGT_SN1NET   2	/* Incoming message from SN1 net */
+#define IIO_ICRB_IMSGT_CRB      3	/* Incoming message from CRB ???  */
+
+/*
+ * values for field initiator.
+ */
+#define IIO_ICRB_INIT_XTALK     0	/* Message originated in xtalk  */
+#define IIO_ICRB_INIT_BTE0      0x1	/* Message originated in BTE 0  */
+#define IIO_ICRB_INIT_SN1NET    0x2	/* Message originated in SN1net */
+#define IIO_ICRB_INIT_CRB       0x3	/* Message originated in CRB ?  */
+#define IIO_ICRB_INIT_BTE1      0x5	/* MEssage originated in BTE 1  */
+
+/*
+ * Number of credits Hub widget has while sending req/response to
+ * xbow.
+ * Value of 3 is required by Xbow 1.1
+ * We may be able to increase this to 4 with Xbow 1.2.
+ */
+#define		   HUBII_XBOW_CREDIT       3
+#define		   HUBII_XBOW_REV2_CREDIT  4
+
+/*
+ * Number of credits that xtalk devices should use when communicating
+ * with a SHub (depth of SHub's queue).
+ */
+#define HUB_CREDIT 4
+
+/*
+ * Some IIO_PRB fields
+ */
+#define IIO_PRB_MULTI_ERR	(1LL << 63)
+#define IIO_PRB_SPUR_RD		(1LL << 51)
+#define IIO_PRB_SPUR_WR		(1LL << 50)
+#define IIO_PRB_RD_TO		(1LL << 49)
+#define IIO_PRB_ERROR		(1LL << 48)
+
+/*************************************************************************
+
+ Some of the IIO field masks and shifts are defined here.
+ This is in order to maintain compatibility in SN0 and SN1 code
+ 
+**************************************************************************/
+
+/*
+ * ICMR register fields
+ * (Note: the IIO_ICMR_P_CNT and IIO_ICMR_PC_VLD from Hub are not
+ * present in SHub)
+ */
+
+#define IIO_ICMR_CRB_VLD_SHFT   20
+#define IIO_ICMR_CRB_VLD_MASK	(0x7fffUL << IIO_ICMR_CRB_VLD_SHFT)
+
+#define IIO_ICMR_FC_CNT_SHFT    16
+#define IIO_ICMR_FC_CNT_MASK	(0xf << IIO_ICMR_FC_CNT_SHFT)
+
+#define IIO_ICMR_C_CNT_SHFT     4
+#define IIO_ICMR_C_CNT_MASK	(0xf << IIO_ICMR_C_CNT_SHFT)
+
+#define IIO_ICMR_PRECISE	(1UL << 52)
+#define IIO_ICMR_CLR_RPPD	(1UL << 13)
+#define IIO_ICMR_CLR_RQPD	(1UL << 12)
+
+/*
+ * IIO PIO Deallocation register field masks : (IIO_IPDR)
+ XXX present but not needed in bedrock?  See the manual.
+ */
+#define IIO_IPDR_PND    	(1 << 4)
+
+/*
+ * IIO CRB deallocation register field masks: (IIO_ICDR)
+ */
+#define IIO_ICDR_PND    	(1 << 4)
+
+/* 
+ * IO BTE Length/Status (IIO_IBLS) register bit field definitions
+ */
+#define IBLS_BUSY		(0x1UL << 20)
+#define IBLS_ERROR_SHFT		16
+#define IBLS_ERROR		(0x1UL << IBLS_ERROR_SHFT)
+#define IBLS_LENGTH_MASK	0xffff
+
+/*
+ * IO BTE Control/Terminate register (IBCT) register bit field definitions
+ */
+#define IBCT_POISON		(0x1UL << 8)
+#define IBCT_NOTIFY		(0x1UL << 4)
+#define IBCT_ZFIL_MODE		(0x1UL << 0)
+
+/*
+ * IIO Incoming Error Packet Header (IIO_IIEPH1/IIO_IIEPH2)
+ */
+#define IIEPH1_VALID		(1UL << 44)
+#define IIEPH1_OVERRUN		(1UL << 40)
+#define IIEPH1_ERR_TYPE_SHFT	32
+#define IIEPH1_ERR_TYPE_MASK	0xf
+#define IIEPH1_SOURCE_SHFT	20
+#define IIEPH1_SOURCE_MASK	11
+#define IIEPH1_SUPPL_SHFT	8
+#define IIEPH1_SUPPL_MASK	11
+#define IIEPH1_CMD_SHFT		0
+#define IIEPH1_CMD_MASK		7
+
+#define IIEPH2_TAIL		(1UL << 40)
+#define IIEPH2_ADDRESS_SHFT	0
+#define IIEPH2_ADDRESS_MASK	38
+
+#define IIEPH1_ERR_SHORT_REQ	2
+#define IIEPH1_ERR_SHORT_REPLY	3
+#define IIEPH1_ERR_LONG_REQ	4
+#define IIEPH1_ERR_LONG_REPLY	5
+
+/*
+ * IO Error Clear register bit field definitions
+ */
+#define IECLR_PI1_FWD_INT	(1UL << 31)	/* clear PI1_FORWARD_INT in iidsr */
+#define IECLR_PI0_FWD_INT	(1UL << 30)	/* clear PI0_FORWARD_INT in iidsr */
+#define IECLR_SPUR_RD_HDR	(1UL << 29)	/* clear valid bit in ixss reg */
+#define IECLR_BTE1		(1UL << 18)	/* clear bte error 1 */
+#define IECLR_BTE0		(1UL << 17)	/* clear bte error 0 */
+#define IECLR_CRAZY		(1UL << 16)	/* clear crazy bit in wstat reg */
+#define IECLR_PRB_F		(1UL << 15)	/* clear err bit in PRB_F reg */
+#define IECLR_PRB_E		(1UL << 14)	/* clear err bit in PRB_E reg */
+#define IECLR_PRB_D		(1UL << 13)	/* clear err bit in PRB_D reg */
+#define IECLR_PRB_C		(1UL << 12)	/* clear err bit in PRB_C reg */
+#define IECLR_PRB_B		(1UL << 11)	/* clear err bit in PRB_B reg */
+#define IECLR_PRB_A		(1UL << 10)	/* clear err bit in PRB_A reg */
+#define IECLR_PRB_9		(1UL << 9)	/* clear err bit in PRB_9 reg */
+#define IECLR_PRB_8		(1UL << 8)	/* clear err bit in PRB_8 reg */
+#define IECLR_PRB_0		(1UL << 0)	/* clear err bit in PRB_0 reg */
+
+/*
+ * IIO CRB control register Fields: IIO_ICCR 
+ */
+#define	IIO_ICCR_PENDING	0x10000
+#define	IIO_ICCR_CMD_MASK	0xFF
+#define	IIO_ICCR_CMD_SHFT	7
+#define	IIO_ICCR_CMD_NOP	0x0	/* No Op */
+#define	IIO_ICCR_CMD_WAKE	0x100	/* Reactivate CRB entry and process */
+#define	IIO_ICCR_CMD_TIMEOUT	0x200	/* Make CRB timeout & mark invalid */
+#define	IIO_ICCR_CMD_EJECT	0x400	/* Contents of entry written to memory
+					 * via a WB
+					 */
+#define	IIO_ICCR_CMD_FLUSH	0x800
+
+/*
+ *
+ * CRB Register description.
+ *
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
+ *
+ * Many of the fields in CRB are status bits used by hardware
+ * for implementation of the protocol. It's very dangerous to
+ * mess around with the CRB registers.
+ *
+ * It's OK to read the CRB registers and try to make sense out of the
+ * fields in CRB.
+ *
+ * Updating CRB requires all activities in Hub IIO to be quiesced.
+ * otherwise, a write to CRB could corrupt other CRB entries.
+ * CRBs are here only as a back door peek to shub IIO's status.
+ * Quiescing implies  no dmas no PIOs
+ * either directly from the cpu or from sn0net.
+ * this is not something that can be done easily. So, AVOID updating
+ * CRBs.
+ */
+
+/*
+ * Easy access macros for CRBs, all 5 registers (A-E)
+ */
+typedef ii_icrb0_a_u_t icrba_t;
+#define a_sidn		ii_icrb0_a_fld_s.ia_sidn
+#define a_tnum		ii_icrb0_a_fld_s.ia_tnum
+#define a_addr          ii_icrb0_a_fld_s.ia_addr
+#define a_valid         ii_icrb0_a_fld_s.ia_vld
+#define a_iow           ii_icrb0_a_fld_s.ia_iow
+#define a_regvalue	ii_icrb0_a_regval
+
+typedef ii_icrb0_b_u_t icrbb_t;
+#define b_use_old       ii_icrb0_b_fld_s.ib_use_old
+#define b_imsgtype      ii_icrb0_b_fld_s.ib_imsgtype
+#define b_imsg          ii_icrb0_b_fld_s.ib_imsg
+#define b_initiator     ii_icrb0_b_fld_s.ib_init
+#define b_exc           ii_icrb0_b_fld_s.ib_exc
+#define b_ackcnt        ii_icrb0_b_fld_s.ib_ack_cnt
+#define b_resp          ii_icrb0_b_fld_s.ib_resp
+#define b_ack           ii_icrb0_b_fld_s.ib_ack
+#define b_hold          ii_icrb0_b_fld_s.ib_hold
+#define b_wb            ii_icrb0_b_fld_s.ib_wb
+#define b_intvn         ii_icrb0_b_fld_s.ib_intvn
+#define b_stall_ib      ii_icrb0_b_fld_s.ib_stall_ib
+#define b_stall_int     ii_icrb0_b_fld_s.ib_stall__intr
+#define b_stall_bte_0   ii_icrb0_b_fld_s.ib_stall__bte_0
+#define b_stall_bte_1   ii_icrb0_b_fld_s.ib_stall__bte_1
+#define b_error         ii_icrb0_b_fld_s.ib_error
+#define b_ecode         ii_icrb0_b_fld_s.ib_errcode
+#define b_lnetuce       ii_icrb0_b_fld_s.ib_ln_uce
+#define b_mark          ii_icrb0_b_fld_s.ib_mark
+#define b_xerr          ii_icrb0_b_fld_s.ib_xt_err
+#define b_regvalue	ii_icrb0_b_regval
+
+typedef ii_icrb0_c_u_t icrbc_t;
+#define c_suppl         ii_icrb0_c_fld_s.ic_suppl
+#define c_barrop        ii_icrb0_c_fld_s.ic_bo
+#define c_doresp        ii_icrb0_c_fld_s.ic_resprqd
+#define c_gbr           ii_icrb0_c_fld_s.ic_gbr
+#define c_btenum        ii_icrb0_c_fld_s.ic_bte_num
+#define c_cohtrans      ii_icrb0_c_fld_s.ic_ct
+#define c_xtsize        ii_icrb0_c_fld_s.ic_size
+#define c_source        ii_icrb0_c_fld_s.ic_source
+#define c_regvalue	ii_icrb0_c_regval
+
+typedef ii_icrb0_d_u_t icrbd_t;
+#define d_sleep         ii_icrb0_d_fld_s.id_sleep
+#define d_pricnt        ii_icrb0_d_fld_s.id_pr_cnt
+#define d_pripsc        ii_icrb0_d_fld_s.id_pr_psc
+#define d_bteop         ii_icrb0_d_fld_s.id_bte_op
+#define d_bteaddr       ii_icrb0_d_fld_s.id_pa_be	/* ic_pa_be fld has 2 names */
+#define d_benable       ii_icrb0_d_fld_s.id_pa_be	/* ic_pa_be fld has 2 names */
+#define d_regvalue	ii_icrb0_d_regval
+
+typedef ii_icrb0_e_u_t icrbe_t;
+#define icrbe_ctxtvld   ii_icrb0_e_fld_s.ie_cvld
+#define icrbe_toutvld   ii_icrb0_e_fld_s.ie_tvld
+#define icrbe_context   ii_icrb0_e_fld_s.ie_context
+#define icrbe_timeout   ii_icrb0_e_fld_s.ie_timeout
+#define e_regvalue	ii_icrb0_e_regval
+
+/* Number of widgets supported by shub */
+#define HUB_NUM_WIDGET          9
+#define HUB_WIDGET_ID_MIN       0x8
+#define HUB_WIDGET_ID_MAX       0xf
+
+#define HUB_WIDGET_PART_NUM     0xc120
+#define MAX_HUBS_PER_XBOW       2
+
+/* A few more #defines for backwards compatibility */
+#define iprb_t          ii_iprb0_u_t
+#define iprb_regval     ii_iprb0_regval
+#define iprb_mult_err	ii_iprb0_fld_s.i_mult_err
+#define iprb_spur_rd	ii_iprb0_fld_s.i_spur_rd
+#define iprb_spur_wr	ii_iprb0_fld_s.i_spur_wr
+#define iprb_rd_to	ii_iprb0_fld_s.i_rd_to
+#define iprb_ovflow     ii_iprb0_fld_s.i_of_cnt
+#define iprb_error      ii_iprb0_fld_s.i_error
+#define iprb_ff         ii_iprb0_fld_s.i_f
+#define iprb_mode       ii_iprb0_fld_s.i_m
+#define iprb_bnakctr    ii_iprb0_fld_s.i_nb
+#define iprb_anakctr    ii_iprb0_fld_s.i_na
+#define iprb_xtalkctr   ii_iprb0_fld_s.i_c
+
+#define LNK_STAT_WORKING        0x2		/* LLP is working */
+
+#define IIO_WSTAT_ECRAZY	(1ULL << 32)	/* Hub gone crazy */
+#define IIO_WSTAT_TXRETRY	(1ULL << 9)	/* Hub Tx Retry timeout */
+#define IIO_WSTAT_TXRETRY_MASK  0x7F		/* should be 0xFF?? */
+#define IIO_WSTAT_TXRETRY_SHFT  16
+#define IIO_WSTAT_TXRETRY_CNT(w)	(((w) >> IIO_WSTAT_TXRETRY_SHFT) & \
+                          		IIO_WSTAT_TXRETRY_MASK)
+
+/* Number of II perf. counters we can multiplex at once */
+
+#define IO_PERF_SETS	32
+
+/* Bit for the widget in inbound access register */
+#define IIO_IIWA_WIDGET(_w)	((u64)(1ULL << _w))
+/* Bit for the widget in outbound access register */
+#define IIO_IOWA_WIDGET(_w)	((u64)(1ULL << _w))
+
+/* NOTE: The following define assumes that we are going to get
+ * widget numbers from 8 thru F and the device numbers within
+ * widget from 0 thru 7.
+ */
+#define IIO_IIDEM_WIDGETDEV_MASK(w, d)	((u64)(1ULL << (8 * ((w) - 8) + (d))))
+
+/* IO Interrupt Destination Register */
+#define IIO_IIDSR_SENT_SHIFT    28
+#define IIO_IIDSR_SENT_MASK     0x30000000
+#define IIO_IIDSR_ENB_SHIFT     24
+#define IIO_IIDSR_ENB_MASK      0x01000000
+#define IIO_IIDSR_NODE_SHIFT    9
+#define IIO_IIDSR_NODE_MASK     0x000ff700
+#define IIO_IIDSR_PI_ID_SHIFT   8
+#define IIO_IIDSR_PI_ID_MASK    0x00000100
+#define IIO_IIDSR_LVL_SHIFT     0
+#define IIO_IIDSR_LVL_MASK      0x000000ff
+
+/* Xtalk timeout threshhold register (IIO_IXTT) */
+#define IXTT_RRSP_TO_SHFT	55	/* read response timeout */
+#define IXTT_RRSP_TO_MASK	(0x1FULL << IXTT_RRSP_TO_SHFT)
+#define IXTT_RRSP_PS_SHFT	32	/* read responsed TO prescalar */
+#define IXTT_RRSP_PS_MASK	(0x7FFFFFULL << IXTT_RRSP_PS_SHFT)
+#define IXTT_TAIL_TO_SHFT	0	/* tail timeout counter threshold */
+#define IXTT_TAIL_TO_MASK	(0x3FFFFFFULL << IXTT_TAIL_TO_SHFT)
+
+/*
+ * The IO LLP control status register and widget control register
+ */
+
+typedef union hubii_wcr_u {
+	u64 wcr_reg_value;
+	struct {
+		u64 wcr_widget_id:4,	/* LLP crossbar credit */
+		 wcr_tag_mode:1,	/* Tag mode */
+		 wcr_rsvd1:8,	/* Reserved */
+		 wcr_xbar_crd:3,	/* LLP crossbar credit */
+		 wcr_f_bad_pkt:1,	/* Force bad llp pkt enable */
+		 wcr_dir_con:1,	/* widget direct connect */
+		 wcr_e_thresh:5,	/* elasticity threshold */
+		 wcr_rsvd:41;	/* unused */
+	} wcr_fields_s;
+} hubii_wcr_t;
+
+#define iwcr_dir_con    wcr_fields_s.wcr_dir_con
+
+/* The structures below are defined to extract and modify the ii
+performance registers */
+
+/* io_perf_sel allows the caller to specify what tests will be
+   performed */
+
+typedef union io_perf_sel {
+	u64 perf_sel_reg;
+	struct {
+		u64 perf_ippr0:4, perf_ippr1:4, perf_icct:8, perf_rsvd:48;
+	} perf_sel_bits;
+} io_perf_sel_t;
+
+/* io_perf_cnt is to extract the count from the shub registers. Due to
+   hardware problems there is only one counter, not two. */
+
+typedef union io_perf_cnt {
+	u64 perf_cnt;
+	struct {
+		u64 perf_cnt:20, perf_rsvd2:12, perf_rsvd1:32;
+	} perf_cnt_bits;
+
+} io_perf_cnt_t;
+
+typedef union iprte_a {
+	u64 entry;
+	struct {
+		u64 i_rsvd_1:3;
+		u64 i_addr:38;
+		u64 i_init:3;
+		u64 i_source:8;
+		u64 i_rsvd:2;
+		u64 i_widget:4;
+		u64 i_to_cnt:5;
+		u64 i_vld:1;
+	} iprte_fields;
+} iprte_a_t;
+
+#endif				/* _ASM_IA64_SN_SHUBIO_H */
diff --git a/arch/ia64/include/asm/sn/simulator.h b/arch/ia64/include/asm/sn/simulator.h
new file mode 100644
index 000000000000..c2611f6cfe33
--- /dev/null
+++ b/arch/ia64/include/asm/sn/simulator.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_SIMULATOR_H
+#define _ASM_IA64_SN_SIMULATOR_H
+
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_SGI_UV)
+#define SNMAGIC 0xaeeeeeee8badbeefL
+#define IS_MEDUSA()			({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;})
+
+#define SIMULATOR_SLEEP()		asm("nop.i 0x8beef")
+#define IS_RUNNING_ON_SIMULATOR()	(sn_prom_type)
+#define IS_RUNNING_ON_FAKE_PROM()	(sn_prom_type == 2)
+extern int sn_prom_type;		/* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
+#else
+#define IS_MEDUSA()			0
+#define SIMULATOR_SLEEP()
+#define IS_RUNNING_ON_SIMULATOR()	0
+#endif
+
+#endif /* _ASM_IA64_SN_SIMULATOR_H */
diff --git a/arch/ia64/include/asm/sn/sn2/sn_hwperf.h b/arch/ia64/include/asm/sn/sn2/sn_hwperf.h
new file mode 100644
index 000000000000..e61ebac38cdd
--- /dev/null
+++ b/arch/ia64/include/asm/sn/sn2/sn_hwperf.h
@@ -0,0 +1,242 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved.
+ *
+ * Data types used by the SN_SAL_HWPERF_OP SAL call for monitoring
+ * SGI Altix node and router hardware
+ *
+ * Mark Goodwin <markgw@sgi.com> Mon Aug 30 12:23:46 EST 2004
+ */
+
+#ifndef SN_HWPERF_H
+#define SN_HWPERF_H
+
+/*
+ * object structure. SN_HWPERF_ENUM_OBJECTS and SN_HWPERF_GET_CPU_INFO
+ * return an array of these. Do not change this without also
+ * changing the corresponding SAL code.
+ */
+#define SN_HWPERF_MAXSTRING		128
+struct sn_hwperf_object_info {
+	u32 id;
+	union {
+		struct {
+			u64 this_part:1;
+			u64 is_shared:1;
+		} fields;
+		struct {
+			u64 flags;
+			u64 reserved;
+		} b;
+	} f;
+	char name[SN_HWPERF_MAXSTRING];
+	char location[SN_HWPERF_MAXSTRING];
+	u32 ports;
+};
+
+#define sn_hwp_this_part	f.fields.this_part
+#define sn_hwp_is_shared	f.fields.is_shared
+#define sn_hwp_flags		f.b.flags
+
+/* macros for object classification */
+#define SN_HWPERF_IS_NODE(x)		((x) && strstr((x)->name, "SHub"))
+#define SN_HWPERF_IS_NODE_SHUB2(x)	((x) && strstr((x)->name, "SHub 2."))
+#define SN_HWPERF_IS_IONODE(x)		((x) && strstr((x)->name, "TIO"))
+#define SN_HWPERF_IS_NL3ROUTER(x)	((x) && strstr((x)->name, "NL3Router"))
+#define SN_HWPERF_IS_NL4ROUTER(x)	((x) && strstr((x)->name, "NL4Router"))
+#define SN_HWPERF_IS_OLDROUTER(x)	((x) && strstr((x)->name, "Router"))
+#define SN_HWPERF_IS_ROUTER(x)		(SN_HWPERF_IS_NL3ROUTER(x) || 		\
+					 	SN_HWPERF_IS_NL4ROUTER(x) || 	\
+					 	SN_HWPERF_IS_OLDROUTER(x))
+#define SN_HWPERF_FOREIGN(x)		((x) && !(x)->sn_hwp_this_part && !(x)->sn_hwp_is_shared)
+#define SN_HWPERF_SAME_OBJTYPE(x,y)	((SN_HWPERF_IS_NODE(x) && SN_HWPERF_IS_NODE(y)) ||\
+					(SN_HWPERF_IS_IONODE(x) && SN_HWPERF_IS_IONODE(y)) ||\
+					(SN_HWPERF_IS_ROUTER(x) && SN_HWPERF_IS_ROUTER(y)))
+
+/* numa port structure, SN_HWPERF_ENUM_PORTS returns an array of these */
+struct sn_hwperf_port_info {
+	u32 port;
+	u32 conn_id;
+	u32 conn_port;
+};
+
+/* for HWPERF_{GET,SET}_MMRS */
+struct sn_hwperf_data {
+	u64 addr;
+	u64 data;
+};
+
+/* user ioctl() argument, see below */
+struct sn_hwperf_ioctl_args {
+        u64 arg;		/* argument, usually an object id */
+        u64 sz;                 /* size of transfer */
+        void *ptr;              /* pointer to source/target */
+        u32 v0;			/* second return value */
+};
+
+/*
+ * For SN_HWPERF_{GET,SET}_MMRS and SN_HWPERF_OBJECT_DISTANCE,
+ * sn_hwperf_ioctl_args.arg can be used to specify a CPU on which
+ * to call SAL, and whether to use an interprocessor interrupt
+ * or task migration in order to do so. If the CPU specified is
+ * SN_HWPERF_ARG_ANY_CPU, then the current CPU will be used.
+ */
+#define SN_HWPERF_ARG_ANY_CPU		0x7fffffffUL
+#define SN_HWPERF_ARG_CPU_MASK		0x7fffffff00000000ULL
+#define SN_HWPERF_ARG_USE_IPI_MASK	0x8000000000000000ULL
+#define SN_HWPERF_ARG_OBJID_MASK	0x00000000ffffffffULL
+
+/* 
+ * ioctl requests on the "sn_hwperf" misc device that call SAL.
+ */
+#define SN_HWPERF_OP_MEM_COPYIN		0x1000
+#define SN_HWPERF_OP_MEM_COPYOUT	0x2000
+#define SN_HWPERF_OP_MASK		0x0fff
+
+/*
+ * Determine mem requirement.
+ * arg	don't care
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define	SN_HWPERF_GET_HEAPSIZE		1
+
+/*
+ * Install mem for SAL drvr
+ * arg	don't care
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to buffer for scratch area
+ */
+#define SN_HWPERF_INSTALL_HEAP		2
+
+/*
+ * Determine number of objects
+ * arg	don't care
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define SN_HWPERF_OBJECT_COUNT		(10|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Determine object "distance", relative to a cpu. This operation can
+ * execute on a designated logical cpu number, using either an IPI or
+ * via task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
+ * the current CPU is used. See the SN_HWPERF_ARG_* macros above.
+ *
+ * arg	bitmap of IPI flag, cpu number and object id
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define SN_HWPERF_OBJECT_DISTANCE	(11|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Enumerate objects. Special case if sz == 8, returns the required
+ * buffer size.
+ * arg	don't care
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to array of struct sn_hwperf_object_info
+ */
+#define SN_HWPERF_ENUM_OBJECTS		(12|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Enumerate NumaLink ports for an object. Special case if sz == 8,
+ * returns the required buffer size.
+ * arg	object id
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to array of struct sn_hwperf_port_info
+ */
+#define SN_HWPERF_ENUM_PORTS		(13|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * SET/GET memory mapped registers. These operations can execute
+ * on a designated logical cpu number, using either an IPI or via
+ * task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
+ * the current CPU is used. See the SN_HWPERF_ARG_* macros above.
+ *
+ * arg	bitmap of ipi flag, cpu number and object id
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to array of struct sn_hwperf_data
+ */
+#define SN_HWPERF_SET_MMRS		(14|SN_HWPERF_OP_MEM_COPYIN)
+#define SN_HWPERF_GET_MMRS		(15|SN_HWPERF_OP_MEM_COPYOUT| \
+					    SN_HWPERF_OP_MEM_COPYIN)
+/*
+ * Lock a shared object
+ * arg	object id
+ * sz	don't care
+ * p	don't care
+ */
+#define SN_HWPERF_ACQUIRE		16
+
+/*
+ * Unlock a shared object
+ * arg	object id
+ * sz	don't care
+ * p	don't care
+ */
+#define SN_HWPERF_RELEASE		17
+
+/*
+ * Break a lock on a shared object
+ * arg	object id
+ * sz	don't care
+ * p	don't care
+ */
+#define SN_HWPERF_FORCE_RELEASE		18
+
+/*
+ * ioctl requests on "sn_hwperf" that do not call SAL
+ */
+
+/*
+ * get cpu info as an array of hwperf_object_info_t. 
+ * id is logical CPU number, name is description, location
+ * is geoid (e.g. 001c04#1c). Special case if sz == 8,
+ * returns the required buffer size.
+ *
+ * arg	don't care
+ * sz	sizeof buffer pointed to by p
+ * p	pointer to array of struct sn_hwperf_object_info
+ */
+#define SN_HWPERF_GET_CPU_INFO		(100|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Given an object id, return it's node number (aka cnode).
+ * arg	object id
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define SN_HWPERF_GET_OBJ_NODE		(101|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Given a node number (cnode), return it's nasid.
+ * arg	ordinal node number (aka cnodeid)
+ * sz	8
+ * p	pointer to u64 integer
+ */
+#define SN_HWPERF_GET_NODE_NASID	(102|SN_HWPERF_OP_MEM_COPYOUT)
+
+/*
+ * Given a node id, determine the id of the nearest node with CPUs
+ * and the id of the nearest node that has memory. The argument
+ * node would normally be a "headless" node, e.g. an "IO node".
+ * Return 0 on success.
+ */
+extern int sn_hwperf_get_nearest_node(cnodeid_t node,
+	cnodeid_t *near_mem, cnodeid_t *near_cpu);
+
+/* return codes */
+#define SN_HWPERF_OP_OK			0
+#define SN_HWPERF_OP_NOMEM		1
+#define SN_HWPERF_OP_NO_PERM		2
+#define SN_HWPERF_OP_IO_ERROR		3
+#define SN_HWPERF_OP_BUSY		4
+#define SN_HWPERF_OP_RECONFIGURE	253
+#define SN_HWPERF_OP_INVAL		254
+
+int sn_topology_open(struct inode *inode, struct file *file);
+int sn_topology_release(struct inode *inode, struct file *file);
+#endif				/* SN_HWPERF_H */
diff --git a/arch/ia64/include/asm/sn/sn_cpuid.h b/arch/ia64/include/asm/sn/sn_cpuid.h
new file mode 100644
index 000000000000..a676dd9ace3e
--- /dev/null
+++ b/arch/ia64/include/asm/sn/sn_cpuid.h
@@ -0,0 +1,132 @@
+/* 
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+
+#ifndef _ASM_IA64_SN_SN_CPUID_H
+#define _ASM_IA64_SN_SN_CPUID_H
+
+#include <linux/smp.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/pda.h>
+#include <asm/intrinsics.h>
+
+
+/*
+ * Functions for converting between cpuids, nodeids and NASIDs.
+ * 
+ * These are for SGI platforms only.
+ *
+ */
+
+
+
+
+/*
+ *  Definitions of terms (these definitions are for IA64 ONLY. Other architectures
+ *  use cpuid/cpunum quite defferently):
+ *
+ *	   CPUID - a number in range of 0..NR_CPUS-1 that uniquely identifies
+ *		the cpu. The value cpuid has no significance on IA64 other than
+ *		the boot cpu is 0.
+ *			smp_processor_id() returns the cpuid of the current cpu.
+ *
+ * 	   CPU_PHYSICAL_ID (also known as HARD_PROCESSOR_ID)
+ *		This is the same as 31:24 of the processor LID register
+ *			hard_smp_processor_id()- cpu_physical_id of current processor
+ *			cpu_physical_id(cpuid) - convert a <cpuid> to a <physical_cpuid>
+ *			cpu_logical_id(phy_id) - convert a <physical_cpuid> to a <cpuid> 
+ *				* not real efficient - don't use in perf critical code
+ *
+ *         SLICE - a number in the range of 0 - 3 (typically) that represents the
+ *		cpu number on a brick.
+ *
+ *	   SUBNODE - (almost obsolete) the number of the FSB that a cpu is
+ *		connected to. This is also the same as the PI number. Usually 0 or 1.
+ *
+ *	NOTE!!!: the value of the bits in the cpu physical id (SAPICid or LID) of a cpu has no 
+ *	significance. The SAPIC id (LID) is a 16-bit cookie that has meaning only to the PROM.
+ *
+ *
+ * The macros convert between cpu physical ids & slice/nasid/cnodeid.
+ * These terms are described below:
+ *
+ *
+ * Brick
+ *          -----   -----           -----   -----       CPU
+ *          | 0 |   | 1 |           | 0 |   | 1 |       SLICE
+ *          -----   -----           -----   -----
+ *            |       |               |       |
+ *            |       |               |       |
+ *          0 |       | 2           0 |       | 2       FSB SLOT
+ *             -------                 -------  
+ *                |                       |
+ *                |                       |
+ *                |                       |
+ *             ------------      -------------
+ *             |          |      |           |
+ *             |    SHUB  |      |   SHUB    |        NASID   (0..MAX_NASIDS)
+ *             |          |----- |           |        CNODEID (0..num_compact_nodes-1)
+ *             |          |      |           |
+ *             |          |      |           |
+ *             ------------      -------------
+ *                   |                 |
+ *                           
+ *
+ */
+
+#define get_node_number(addr)			NASID_GET(addr)
+
+/*
+ * NOTE: on non-MP systems, only cpuid 0 exists
+ */
+
+extern short physical_node_map[];	/* indexed by nasid to get cnode */
+
+/*
+ * Macros for retrieving info about current cpu
+ */
+#define get_nasid()	(sn_nodepda->phys_cpuid[smp_processor_id()].nasid)
+#define get_subnode()	(sn_nodepda->phys_cpuid[smp_processor_id()].subnode)
+#define get_slice()	(sn_nodepda->phys_cpuid[smp_processor_id()].slice)
+#define get_cnode()	(sn_nodepda->phys_cpuid[smp_processor_id()].cnode)
+#define get_sapicid()	((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff)
+
+/*
+ * Macros for retrieving info about an arbitrary cpu
+ *	cpuid - logical cpu id
+ */
+#define cpuid_to_nasid(cpuid)		(sn_nodepda->phys_cpuid[cpuid].nasid)
+#define cpuid_to_subnode(cpuid)		(sn_nodepda->phys_cpuid[cpuid].subnode)
+#define cpuid_to_slice(cpuid)		(sn_nodepda->phys_cpuid[cpuid].slice)
+
+
+/*
+ * Dont use the following in performance critical code. They require scans
+ * of potentially large tables.
+ */
+extern int nasid_slice_to_cpuid(int, int);
+
+/*
+ * cnodeid_to_nasid - convert a cnodeid to a NASID
+ */
+#define cnodeid_to_nasid(cnodeid)	(sn_cnodeid_to_nasid[cnodeid])
+ 
+/*
+ * nasid_to_cnodeid - convert a NASID to a cnodeid
+ */
+#define nasid_to_cnodeid(nasid)		(physical_node_map[nasid])
+
+/*
+ * partition_coherence_id - get the coherence ID of the current partition
+ */
+extern u8 sn_coherency_id;
+#define partition_coherence_id()	(sn_coherency_id)
+
+#endif /* _ASM_IA64_SN_SN_CPUID_H */
+
diff --git a/arch/ia64/include/asm/sn/sn_feature_sets.h b/arch/ia64/include/asm/sn/sn_feature_sets.h
new file mode 100644
index 000000000000..8e83ac117ace
--- /dev/null
+++ b/arch/ia64/include/asm/sn/sn_feature_sets.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_IA64_SN_FEATURE_SETS_H
+#define _ASM_IA64_SN_FEATURE_SETS_H
+
+/*
+ * SN PROM Features
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2005-2006 Silicon Graphics, Inc.  All rights reserved.
+ */
+
+
+/* --------------------- PROM Features -----------------------------*/
+extern int sn_prom_feature_available(int id);
+
+#define MAX_PROM_FEATURE_SETS			2
+
+/*
+ * The following defines features that may or may not be supported by the
+ * current PROM. The OS uses sn_prom_feature_available(feature) to test for
+ * the presence of a PROM feature. Down rev (old) PROMs will always test
+ * "false" for new features.
+ *
+ * Use:
+ * 		if (sn_prom_feature_available(PRF_XXX))
+ * 			...
+ */
+
+#define PRF_PAL_CACHE_FLUSH_SAFE	0
+#define PRF_DEVICE_FLUSH_LIST		1
+#define PRF_HOTPLUG_SUPPORT		2
+#define PRF_CPU_DISABLE_SUPPORT		3
+
+/* --------------------- OS Features -------------------------------*/
+
+/*
+ * The following defines OS features that are optionally present in
+ * the operating system.
+ * During boot, PROM is notified of these features via a series of calls:
+ *
+ * 		ia64_sn_set_os_feature(feature1);
+ *
+ * Once enabled, a feature cannot be disabled.
+ *
+ * By default, features are disabled unless explicitly enabled.
+ *
+ * These defines must be kept in sync with the corresponding
+ * PROM definitions in feature_sets.h.
+ */
+#define  OSF_MCA_SLV_TO_OS_INIT_SLV	0
+#define  OSF_FEAT_LOG_SBES		1
+#define  OSF_ACPI_ENABLE		2
+#define  OSF_PCISEGMENT_ENABLE		3
+
+
+#endif /* _ASM_IA64_SN_FEATURE_SETS_H */
diff --git a/arch/ia64/include/asm/sn/sn_sal.h b/arch/ia64/include/asm/sn/sn_sal.h
new file mode 100644
index 000000000000..57e649d388b8
--- /dev/null
+++ b/arch/ia64/include/asm/sn/sn_sal.h
@@ -0,0 +1,1188 @@
+#ifndef _ASM_IA64_SN_SN_SAL_H
+#define _ASM_IA64_SN_SN_SAL_H
+
+/*
+ * System Abstraction Layer definitions for IA64
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2000-2006 Silicon Graphics, Inc.  All rights reserved.
+ */
+
+
+#include <asm/sal.h>
+#include <asm/sn/sn_cpuid.h>
+#include <asm/sn/arch.h>
+#include <asm/sn/geo.h>
+#include <asm/sn/nodepda.h>
+#include <asm/sn/shub_mmr.h>
+
+// SGI Specific Calls
+#define  SN_SAL_POD_MODE                           0x02000001
+#define  SN_SAL_SYSTEM_RESET                       0x02000002
+#define  SN_SAL_PROBE                              0x02000003
+#define  SN_SAL_GET_MASTER_NASID                   0x02000004
+#define	 SN_SAL_GET_KLCONFIG_ADDR		   0x02000005
+#define  SN_SAL_LOG_CE				   0x02000006
+#define  SN_SAL_REGISTER_CE			   0x02000007
+#define  SN_SAL_GET_PARTITION_ADDR		   0x02000009
+#define  SN_SAL_XP_ADDR_REGION			   0x0200000f
+#define  SN_SAL_NO_FAULT_ZONE_VIRTUAL		   0x02000010
+#define  SN_SAL_NO_FAULT_ZONE_PHYSICAL		   0x02000011
+#define  SN_SAL_PRINT_ERROR			   0x02000012
+#define  SN_SAL_REGISTER_PMI_HANDLER		   0x02000014
+#define  SN_SAL_SET_ERROR_HANDLING_FEATURES	   0x0200001a	// reentrant
+#define  SN_SAL_GET_FIT_COMPT			   0x0200001b	// reentrant
+#define  SN_SAL_GET_SAPIC_INFO                     0x0200001d
+#define  SN_SAL_GET_SN_INFO                        0x0200001e
+#define  SN_SAL_CONSOLE_PUTC                       0x02000021
+#define  SN_SAL_CONSOLE_GETC                       0x02000022
+#define  SN_SAL_CONSOLE_PUTS                       0x02000023
+#define  SN_SAL_CONSOLE_GETS                       0x02000024
+#define  SN_SAL_CONSOLE_GETS_TIMEOUT               0x02000025
+#define  SN_SAL_CONSOLE_POLL                       0x02000026
+#define  SN_SAL_CONSOLE_INTR                       0x02000027
+#define  SN_SAL_CONSOLE_PUTB			   0x02000028
+#define  SN_SAL_CONSOLE_XMIT_CHARS		   0x0200002a
+#define  SN_SAL_CONSOLE_READC			   0x0200002b
+#define  SN_SAL_SYSCTL_OP			   0x02000030
+#define  SN_SAL_SYSCTL_MODID_GET	           0x02000031
+#define  SN_SAL_SYSCTL_GET                         0x02000032
+#define  SN_SAL_SYSCTL_IOBRICK_MODULE_GET          0x02000033
+#define  SN_SAL_SYSCTL_IO_PORTSPEED_GET            0x02000035
+#define  SN_SAL_SYSCTL_SLAB_GET                    0x02000036
+#define  SN_SAL_BUS_CONFIG		   	   0x02000037
+#define  SN_SAL_SYS_SERIAL_GET			   0x02000038
+#define  SN_SAL_PARTITION_SERIAL_GET		   0x02000039
+#define  SN_SAL_SYSCTL_PARTITION_GET               0x0200003a
+#define  SN_SAL_SYSTEM_POWER_DOWN		   0x0200003b
+#define  SN_SAL_GET_MASTER_BASEIO_NASID		   0x0200003c
+#define  SN_SAL_COHERENCE                          0x0200003d
+#define  SN_SAL_MEMPROTECT                         0x0200003e
+#define  SN_SAL_SYSCTL_FRU_CAPTURE		   0x0200003f
+
+#define  SN_SAL_SYSCTL_IOBRICK_PCI_OP		   0x02000042	// reentrant
+#define	 SN_SAL_IROUTER_OP			   0x02000043
+#define  SN_SAL_SYSCTL_EVENT                       0x02000044
+#define  SN_SAL_IOIF_INTERRUPT			   0x0200004a
+#define  SN_SAL_HWPERF_OP			   0x02000050   // lock
+#define  SN_SAL_IOIF_ERROR_INTERRUPT		   0x02000051
+#define  SN_SAL_IOIF_PCI_SAFE			   0x02000052
+#define  SN_SAL_IOIF_SLOT_ENABLE		   0x02000053
+#define  SN_SAL_IOIF_SLOT_DISABLE		   0x02000054
+#define  SN_SAL_IOIF_GET_HUBDEV_INFO		   0x02000055
+#define  SN_SAL_IOIF_GET_PCIBUS_INFO		   0x02000056
+#define  SN_SAL_IOIF_GET_PCIDEV_INFO		   0x02000057
+#define  SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST	   0x02000058	// deprecated
+#define  SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST	   0x0200005a
+
+#define SN_SAL_IOIF_INIT			   0x0200005f
+#define SN_SAL_HUB_ERROR_INTERRUPT		   0x02000060
+#define SN_SAL_BTE_RECOVER			   0x02000061
+#define SN_SAL_RESERVED_DO_NOT_USE		   0x02000062
+#define SN_SAL_IOIF_GET_PCI_TOPOLOGY		   0x02000064
+
+#define  SN_SAL_GET_PROM_FEATURE_SET		   0x02000065
+#define  SN_SAL_SET_OS_FEATURE_SET		   0x02000066
+#define  SN_SAL_INJECT_ERROR			   0x02000067
+#define  SN_SAL_SET_CPU_NUMBER			   0x02000068
+
+#define  SN_SAL_KERNEL_LAUNCH_EVENT		   0x02000069
+
+/*
+ * Service-specific constants
+ */
+
+/* Console interrupt manipulation */
+	/* action codes */
+#define SAL_CONSOLE_INTR_OFF    0       /* turn the interrupt off */
+#define SAL_CONSOLE_INTR_ON     1       /* turn the interrupt on */
+#define SAL_CONSOLE_INTR_STATUS 2	/* retrieve the interrupt status */
+	/* interrupt specification & status return codes */
+#define SAL_CONSOLE_INTR_XMIT	1	/* output interrupt */
+#define SAL_CONSOLE_INTR_RECV	2	/* input interrupt */
+
+/* interrupt handling */
+#define SAL_INTR_ALLOC		1
+#define SAL_INTR_FREE		2
+#define SAL_INTR_REDIRECT	3
+
+/*
+ * operations available on the generic SN_SAL_SYSCTL_OP
+ * runtime service
+ */
+#define SAL_SYSCTL_OP_IOBOARD		0x0001  /*  retrieve board type */
+#define SAL_SYSCTL_OP_TIO_JLCK_RST      0x0002  /* issue TIO clock reset */
+
+/*
+ * IRouter (i.e. generalized system controller) operations
+ */
+#define SAL_IROUTER_OPEN	0	/* open a subchannel */
+#define SAL_IROUTER_CLOSE	1	/* close a subchannel */
+#define SAL_IROUTER_SEND	2	/* send part of an IRouter packet */
+#define SAL_IROUTER_RECV	3	/* receive part of an IRouter packet */
+#define SAL_IROUTER_INTR_STATUS	4	/* check the interrupt status for
+					 * an open subchannel
+					 */
+#define SAL_IROUTER_INTR_ON	5	/* enable an interrupt */
+#define SAL_IROUTER_INTR_OFF	6	/* disable an interrupt */
+#define SAL_IROUTER_INIT	7	/* initialize IRouter driver */
+
+/* IRouter interrupt mask bits */
+#define SAL_IROUTER_INTR_XMIT	SAL_CONSOLE_INTR_XMIT
+#define SAL_IROUTER_INTR_RECV	SAL_CONSOLE_INTR_RECV
+
+/*
+ * Error Handling Features
+ */
+#define SAL_ERR_FEAT_MCA_SLV_TO_OS_INIT_SLV	0x1	// obsolete
+#define SAL_ERR_FEAT_LOG_SBES			0x2	// obsolete
+#define SAL_ERR_FEAT_MFR_OVERRIDE		0x4
+#define SAL_ERR_FEAT_SBE_THRESHOLD		0xffff0000
+
+/*
+ * SAL Error Codes
+ */
+#define SALRET_MORE_PASSES	1
+#define SALRET_OK		0
+#define SALRET_NOT_IMPLEMENTED	(-1)
+#define SALRET_INVALID_ARG	(-2)
+#define SALRET_ERROR		(-3)
+
+#define SN_SAL_FAKE_PROM			   0x02009999
+
+/**
+  * sn_sal_revision - get the SGI SAL revision number
+  *
+  * The SGI PROM stores its version in the sal_[ab]_rev_(major|minor).
+  * This routine simply extracts the major and minor values and
+  * presents them in a u32 format.
+  *
+  * For example, version 4.05 would be represented at 0x0405.
+  */
+static inline u32
+sn_sal_rev(void)
+{
+	struct ia64_sal_systab *systab = __va(efi.sal_systab);
+
+	return (u32)(systab->sal_b_rev_major << 8 | systab->sal_b_rev_minor);
+}
+
+/*
+ * Returns the master console nasid, if the call fails, return an illegal
+ * value.
+ */
+static inline u64
+ia64_sn_get_console_nasid(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_NASID, 0, 0, 0, 0, 0, 0, 0);
+
+	if (ret_stuff.status < 0)
+		return ret_stuff.status;
+
+	/* Master console nasid is in 'v0' */
+	return ret_stuff.v0;
+}
+
+/*
+ * Returns the master baseio nasid, if the call fails, return an illegal
+ * value.
+ */
+static inline u64
+ia64_sn_get_master_baseio_nasid(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_BASEIO_NASID, 0, 0, 0, 0, 0, 0, 0);
+
+	if (ret_stuff.status < 0)
+		return ret_stuff.status;
+
+	/* Master baseio nasid is in 'v0' */
+	return ret_stuff.v0;
+}
+
+static inline void *
+ia64_sn_get_klconfig_addr(nasid_t nasid)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0);
+	return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL;
+}
+
+/*
+ * Returns the next console character.
+ */
+static inline u64
+ia64_sn_console_getc(int *ch)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_GETC, 0, 0, 0, 0, 0, 0, 0);
+
+	/* character is in 'v0' */
+	*ch = (int)ret_stuff.v0;
+
+	return ret_stuff.status;
+}
+
+/*
+ * Read a character from the SAL console device, after a previous interrupt
+ * or poll operation has given us to know that a character is available
+ * to be read.
+ */
+static inline u64
+ia64_sn_console_readc(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_READC, 0, 0, 0, 0, 0, 0, 0);
+
+	/* character is in 'v0' */
+	return ret_stuff.v0;
+}
+
+/*
+ * Sends the given character to the console.
+ */
+static inline u64
+ia64_sn_console_putc(char ch)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTC, (u64)ch, 0, 0, 0, 0, 0, 0);
+
+	return ret_stuff.status;
+}
+
+/*
+ * Sends the given buffer to the console.
+ */
+static inline u64
+ia64_sn_console_putb(const char *buf, int len)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0; 
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTB, (u64)buf, (u64)len, 0, 0, 0, 0, 0);
+
+	if ( ret_stuff.status == 0 ) {
+		return ret_stuff.v0;
+	}
+	return (u64)0;
+}
+
+/*
+ * Print a platform error record
+ */
+static inline u64
+ia64_sn_plat_specific_err_print(int (*hook)(const char*, ...), char *rec)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_REENTRANT(ret_stuff, SN_SAL_PRINT_ERROR, (u64)hook, (u64)rec, 0, 0, 0, 0, 0);
+
+	return ret_stuff.status;
+}
+
+/*
+ * Check for Platform errors
+ */
+static inline u64
+ia64_sn_plat_cpei_handler(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_LOG_CE, 0, 0, 0, 0, 0, 0, 0);
+
+	return ret_stuff.status;
+}
+
+/*
+ * Set Error Handling Features	(Obsolete)
+ */
+static inline u64
+ia64_sn_plat_set_error_handling_features(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_REENTRANT(ret_stuff, SN_SAL_SET_ERROR_HANDLING_FEATURES,
+		SAL_ERR_FEAT_LOG_SBES,
+		0, 0, 0, 0, 0, 0);
+
+	return ret_stuff.status;
+}
+
+/*
+ * Checks for console input.
+ */
+static inline u64
+ia64_sn_console_check(int *result)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_POLL, 0, 0, 0, 0, 0, 0, 0);
+
+	/* result is in 'v0' */
+	*result = (int)ret_stuff.v0;
+
+	return ret_stuff.status;
+}
+
+/*
+ * Checks console interrupt status
+ */
+static inline u64
+ia64_sn_console_intr_status(void)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
+		 0, SAL_CONSOLE_INTR_STATUS,
+		 0, 0, 0, 0, 0);
+
+	if (ret_stuff.status == 0) {
+	    return ret_stuff.v0;
+	}
+	
+	return 0;
+}
+
+/*
+ * Enable an interrupt on the SAL console device.
+ */
+static inline void
+ia64_sn_console_intr_enable(u64 intr)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
+		 intr, SAL_CONSOLE_INTR_ON,
+		 0, 0, 0, 0, 0);
+}
+
+/*
+ * Disable an interrupt on the SAL console device.
+ */
+static inline void
+ia64_sn_console_intr_disable(u64 intr)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR, 
+		 intr, SAL_CONSOLE_INTR_OFF,
+		 0, 0, 0, 0, 0);
+}
+
+/*
+ * Sends a character buffer to the console asynchronously.
+ */
+static inline u64
+ia64_sn_console_xmit_chars(char *buf, int len)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_XMIT_CHARS,
+		 (u64)buf, (u64)len,
+		 0, 0, 0, 0, 0);
+
+	if (ret_stuff.status == 0) {
+	    return ret_stuff.v0;
+	}
+
+	return 0;
+}
+
+/*
+ * Returns the iobrick module Id
+ */
+static inline u64
+ia64_sn_sysctl_iobrick_module_get(nasid_t nasid, int *result)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYSCTL_IOBRICK_MODULE_GET, nasid, 0, 0, 0, 0, 0, 0);
+
+	/* result is in 'v0' */
+	*result = (int)ret_stuff.v0;
+
+	return ret_stuff.status;
+}
+
+/**
+ * ia64_sn_pod_mode - call the SN_SAL_POD_MODE function
+ *
+ * SN_SAL_POD_MODE actually takes an argument, but it's always
+ * 0 when we call it from the kernel, so we don't have to expose
+ * it to the caller.
+ */
+static inline u64
+ia64_sn_pod_mode(void)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_REENTRANT(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0);
+	if (isrv.status)
+		return 0;
+	return isrv.v0;
+}
+
+/**
+ * ia64_sn_probe_mem - read from memory safely
+ * @addr: address to probe
+ * @size: number bytes to read (1,2,4,8)
+ * @data_ptr: address to store value read by probe (-1 returned if probe fails)
+ *
+ * Call into the SAL to do a memory read.  If the read generates a machine
+ * check, this routine will recover gracefully and return -1 to the caller.
+ * @addr is usually a kernel virtual address in uncached space (i.e. the
+ * address starts with 0xc), but if called in physical mode, @addr should
+ * be a physical address.
+ *
+ * Return values:
+ *  0 - probe successful
+ *  1 - probe failed (generated MCA)
+ *  2 - Bad arg
+ * <0 - PAL error
+ */
+static inline u64
+ia64_sn_probe_mem(long addr, long size, void *data_ptr)
+{
+	struct ia64_sal_retval isrv;
+
+	SAL_CALL(isrv, SN_SAL_PROBE, addr, size, 0, 0, 0, 0, 0);
+
+	if (data_ptr) {
+		switch (size) {
+		case 1:
+			*((u8*)data_ptr) = (u8)isrv.v0;
+			break;
+		case 2:
+			*((u16*)data_ptr) = (u16)isrv.v0;
+			break;
+		case 4:
+			*((u32*)data_ptr) = (u32)isrv.v0;
+			break;
+		case 8:
+			*((u64*)data_ptr) = (u64)isrv.v0;
+			break;
+		default:
+			isrv.status = 2;
+		}
+	}
+	return isrv.status;
+}
+
+/*
+ * Retrieve the system serial number as an ASCII string.
+ */
+static inline u64
+ia64_sn_sys_serial_get(char *buf)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYS_SERIAL_GET, buf, 0, 0, 0, 0, 0, 0);
+	return ret_stuff.status;
+}
+
+extern char sn_system_serial_number_string[];
+extern u64 sn_partition_serial_number;
+
+static inline char *
+sn_system_serial_number(void) {
+	if (sn_system_serial_number_string[0]) {
+		return(sn_system_serial_number_string);
+	} else {
+		ia64_sn_sys_serial_get(sn_system_serial_number_string);
+		return(sn_system_serial_number_string);
+	}
+}
+	
+
+/*
+ * Returns a unique id number for this system and partition (suitable for
+ * use with license managers), based in part on the system serial number.
+ */
+static inline u64
+ia64_sn_partition_serial_get(void)
+{
+	struct ia64_sal_retval ret_stuff;
+	ia64_sal_oemcall_reentrant(&ret_stuff, SN_SAL_PARTITION_SERIAL_GET, 0,
+				   0, 0, 0, 0, 0, 0);
+	if (ret_stuff.status != 0)
+	    return 0;
+	return ret_stuff.v0;
+}
+
+static inline u64
+sn_partition_serial_number_val(void) {
+	if (unlikely(sn_partition_serial_number == 0)) {
+		sn_partition_serial_number = ia64_sn_partition_serial_get();
+	}
+	return sn_partition_serial_number;
+}
+
+/*
+ * Returns the partition id of the nasid passed in as an argument,
+ * or INVALID_PARTID if the partition id cannot be retrieved.
+ */
+static inline partid_t
+ia64_sn_sysctl_partition_get(nasid_t nasid)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL(ret_stuff, SN_SAL_SYSCTL_PARTITION_GET, nasid,
+		0, 0, 0, 0, 0, 0);
+	if (ret_stuff.status != 0)
+	    return -1;
+	return ((partid_t)ret_stuff.v0);
+}
+
+/*
+ * Returns the physical address of the partition's reserved page through
+ * an iterative number of calls.
+ *
+ * On first call, 'cookie' and 'len' should be set to 0, and 'addr'
+ * set to the nasid of the partition whose reserved page's address is
+ * being sought.
+ * On subsequent calls, pass the values, that were passed back on the
+ * previous call.
+ *
+ * While the return status equals SALRET_MORE_PASSES, keep calling
+ * this function after first copying 'len' bytes starting at 'addr'
+ * into 'buf'. Once the return status equals SALRET_OK, 'addr' will
+ * be the physical address of the partition's reserved page. If the
+ * return status equals neither of these, an error as occurred.
+ */
+static inline s64
+sn_partition_reserved_page_pa(u64 buf, u64 *cookie, u64 *addr, u64 *len)
+{
+	struct ia64_sal_retval rv;
+	ia64_sal_oemcall_reentrant(&rv, SN_SAL_GET_PARTITION_ADDR, *cookie,
+				   *addr, buf, *len, 0, 0, 0);
+	*cookie = rv.v0;
+	*addr = rv.v1;
+	*len = rv.v2;
+	return rv.status;
+}
+
+/*
+ * Register or unregister a physical address range being referenced across
+ * a partition boundary for which certain SAL errors should be scanned for,
+ * cleaned up and ignored.  This is of value for kernel partitioning code only.
+ * Values for the operation argument:
+ *	1 = register this address range with SAL
+ *	0 = unregister this address range with SAL
+ * 
+ * SAL maintains a reference count on an address range in case it is registered
+ * multiple times.
+ * 
+ * On success, returns the reference count of the address range after the SAL
+ * call has performed the current registration/unregistration.  Returns a
+ * negative value if an error occurred.
+ */
+static inline int
+sn_register_xp_addr_region(u64 paddr, u64 len, int operation)
+{
+	struct ia64_sal_retval ret_stuff;
+	ia64_sal_oemcall(&ret_stuff, SN_SAL_XP_ADDR_REGION, paddr, len,
+			 (u64)operation, 0, 0, 0, 0);
+	return ret_stuff.status;
+}
+
+/*
+ * Register or unregister an instruction range for which SAL errors should
+ * be ignored.  If an error occurs while in the registered range, SAL jumps
+ * to return_addr after ignoring the error.  Values for the operation argument:
+ *	1 = register this instruction range with SAL
+ *	0 = unregister this instruction range with SAL
+ *
+ * Returns 0 on success, or a negative value if an error occurred.
+ */
+static inline int
+sn_register_nofault_code(u64 start_addr, u64 end_addr, u64 return_addr,
+			 int virtual, int operation)
+{
+	struct ia64_sal_retval ret_stuff;
+	u64 call;
+	if (virtual) {
+		call = SN_SAL_NO_FAULT_ZONE_VIRTUAL;
+	} else {
+		call = SN_SAL_NO_FAULT_ZONE_PHYSICAL;
+	}
+	ia64_sal_oemcall(&ret_stuff, call, start_addr, end_addr, return_addr,
+			 (u64)1, 0, 0, 0);
+	return ret_stuff.status;
+}
+
+/*
+ * Register or unregister a function to handle a PMI received by a CPU.
+ * Before calling the registered handler, SAL sets r1 to the value that
+ * was passed in as the global_pointer.
+ *
+ * If the handler pointer is NULL, then the currently registered handler
+ * will be unregistered.
+ *
+ * Returns 0 on success, or a negative value if an error occurred.
+ */
+static inline int
+sn_register_pmi_handler(u64 handler, u64 global_pointer)
+{
+	struct ia64_sal_retval ret_stuff;
+	ia64_sal_oemcall(&ret_stuff, SN_SAL_REGISTER_PMI_HANDLER, handler,
+			 global_pointer, 0, 0, 0, 0, 0);
+	return ret_stuff.status;
+}
+
+/*
+ * Change or query the coherence domain for this partition. Each cpu-based
+ * nasid is represented by a bit in an array of 64-bit words:
+ *      0 = not in this partition's coherency domain
+ *      1 = in this partition's coherency domain
+ *
+ * It is not possible for the local system's nasids to be removed from
+ * the coherency domain.  Purpose of the domain arguments:
+ *      new_domain = set the coherence domain to the given nasids
+ *      old_domain = return the current coherence domain
+ *
+ * Returns 0 on success, or a negative value if an error occurred.
+ */
+static inline int
+sn_change_coherence(u64 *new_domain, u64 *old_domain)
+{
+	struct ia64_sal_retval ret_stuff;
+	ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_COHERENCE, (u64)new_domain,
+				(u64)old_domain, 0, 0, 0, 0, 0);
+	return ret_stuff.status;
+}
+
+/*
+ * Change memory access protections for a physical address range.
+ * nasid_array is not used on Altix, but may be in future architectures.
+ * Available memory protection access classes are defined after the function.
+ */
+static inline int
+sn_change_memprotect(u64 paddr, u64 len, u64 perms, u64 *nasid_array)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_MEMPROTECT, paddr, len,
+				(u64)nasid_array, perms, 0, 0, 0);
+	return ret_stuff.status;
+}
+#define SN_MEMPROT_ACCESS_CLASS_0		0x14a080
+#define SN_MEMPROT_ACCESS_CLASS_1		0x2520c2
+#define SN_MEMPROT_ACCESS_CLASS_2		0x14a1ca
+#define SN_MEMPROT_ACCESS_CLASS_3		0x14a290
+#define SN_MEMPROT_ACCESS_CLASS_6		0x084080
+#define SN_MEMPROT_ACCESS_CLASS_7		0x021080
+
+/*
+ * Turns off system power.
+ */
+static inline void
+ia64_sn_power_down(void)
+{
+	struct ia64_sal_retval ret_stuff;
+	SAL_CALL(ret_stuff, SN_SAL_SYSTEM_POWER_DOWN, 0, 0, 0, 0, 0, 0, 0);
+	while(1)
+		cpu_relax();
+	/* never returns */
+}
+
+/**
+ * ia64_sn_fru_capture - tell the system controller to capture hw state
+ *
+ * This routine will call the SAL which will tell the system controller(s)
+ * to capture hw mmr information from each SHub in the system.
+ */
+static inline u64
+ia64_sn_fru_capture(void)
+{
+        struct ia64_sal_retval isrv;
+        SAL_CALL(isrv, SN_SAL_SYSCTL_FRU_CAPTURE, 0, 0, 0, 0, 0, 0, 0);
+        if (isrv.status)
+                return 0;
+        return isrv.v0;
+}
+
+/*
+ * Performs an operation on a PCI bus or slot -- power up, power down
+ * or reset.
+ */
+static inline u64
+ia64_sn_sysctl_iobrick_pci_op(nasid_t n, u64 connection_type, 
+			      u64 bus, char slot, 
+			      u64 action)
+{
+	struct ia64_sal_retval rv = {0, 0, 0, 0};
+
+	SAL_CALL_NOLOCK(rv, SN_SAL_SYSCTL_IOBRICK_PCI_OP, connection_type, n, action,
+		 bus, (u64) slot, 0, 0);
+	if (rv.status)
+	    	return rv.v0;
+	return 0;
+}
+
+
+/*
+ * Open a subchannel for sending arbitrary data to the system
+ * controller network via the system controller device associated with
+ * 'nasid'.  Return the subchannel number or a negative error code.
+ */
+static inline int
+ia64_sn_irtr_open(nasid_t nasid)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_OPEN, nasid,
+			   0, 0, 0, 0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Close system controller subchannel 'subch' previously opened on 'nasid'.
+ */
+static inline int
+ia64_sn_irtr_close(nasid_t nasid, int subch)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_CLOSE,
+			   (u64) nasid, (u64) subch, 0, 0, 0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * Read data from system controller associated with 'nasid' on
+ * subchannel 'subch'.  The buffer to be filled is pointed to by
+ * 'buf', and its capacity is in the integer pointed to by 'len'.  The
+ * referent of 'len' is set to the number of bytes read by the SAL
+ * call.  The return value is either SALRET_OK (for bytes read) or
+ * SALRET_ERROR (for error or "no data available").
+ */
+static inline int
+ia64_sn_irtr_recv(nasid_t nasid, int subch, char *buf, int *len)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_RECV,
+			   (u64) nasid, (u64) subch, (u64) buf, (u64) len,
+			   0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * Write data to the system controller network via the system
+ * controller associated with 'nasid' on suchannel 'subch'.  The
+ * buffer to be written out is pointed to by 'buf', and 'len' is the
+ * number of bytes to be written.  The return value is either the
+ * number of bytes written (which could be zero) or a negative error
+ * code.
+ */
+static inline int
+ia64_sn_irtr_send(nasid_t nasid, int subch, char *buf, int len)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_SEND,
+			   (u64) nasid, (u64) subch, (u64) buf, (u64) len,
+			   0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Check whether any interrupts are pending for the system controller
+ * associated with 'nasid' and its subchannel 'subch'.  The return
+ * value is a mask of pending interrupts (SAL_IROUTER_INTR_XMIT and/or
+ * SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr(nasid_t nasid, int subch)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_STATUS,
+			   (u64) nasid, (u64) subch, 0, 0, 0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Enable the interrupt indicated by the intr parameter (either
+ * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr_enable(nasid_t nasid, int subch, u64 intr)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_ON,
+			   (u64) nasid, (u64) subch, intr, 0, 0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Disable the interrupt indicated by the intr parameter (either
+ * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
+ */
+static inline int
+ia64_sn_irtr_intr_disable(nasid_t nasid, int subch, u64 intr)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_OFF,
+			   (u64) nasid, (u64) subch, intr, 0, 0, 0);
+	return (int) rv.v0;
+}
+
+/*
+ * Set up a node as the point of contact for system controller
+ * environmental event delivery.
+ */
+static inline int
+ia64_sn_sysctl_event_init(nasid_t nasid)
+{
+        struct ia64_sal_retval rv;
+        SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_EVENT, (u64) nasid,
+			   0, 0, 0, 0, 0, 0);
+        return (int) rv.v0;
+}
+
+/*
+ * Ask the system controller on the specified nasid to reset
+ * the CX corelet clock.  Only valid on TIO nodes.
+ */
+static inline int
+ia64_sn_sysctl_tio_clock_reset(nasid_t nasid)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_TIO_JLCK_RST,
+			nasid, 0, 0, 0, 0, 0);
+	if (rv.status != 0)
+		return (int)rv.status;
+	if (rv.v0 != 0)
+		return (int)rv.v0;
+
+	return 0;
+}
+
+/*
+ * Get the associated ioboard type for a given nasid.
+ */
+static inline s64
+ia64_sn_sysctl_ioboard_get(nasid_t nasid, u16 *ioboard)
+{
+	struct ia64_sal_retval isrv;
+	SAL_CALL_REENTRANT(isrv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_IOBOARD,
+			   nasid, 0, 0, 0, 0, 0);
+	if (isrv.v0 != 0) {
+		*ioboard = isrv.v0;
+		return isrv.status;
+	}
+	if (isrv.v1 != 0) {
+		*ioboard = isrv.v1;
+		return isrv.status;
+	}
+
+	return isrv.status;
+}
+
+/**
+ * ia64_sn_get_fit_compt - read a FIT entry from the PROM header
+ * @nasid: NASID of node to read
+ * @index: FIT entry index to be retrieved (0..n)
+ * @fitentry: 16 byte buffer where FIT entry will be stored.
+ * @banbuf: optional buffer for retrieving banner
+ * @banlen: length of banner buffer
+ *
+ * Access to the physical PROM chips needs to be serialized since reads and
+ * writes can't occur at the same time, so we need to call into the SAL when
+ * we want to look at the FIT entries on the chips.
+ *
+ * Returns:
+ *	%SALRET_OK if ok
+ *	%SALRET_INVALID_ARG if index too big
+ *	%SALRET_NOT_IMPLEMENTED if running on older PROM
+ *	??? if nasid invalid OR banner buffer not large enough
+ */
+static inline int
+ia64_sn_get_fit_compt(u64 nasid, u64 index, void *fitentry, void *banbuf,
+		      u64 banlen)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_NOLOCK(rv, SN_SAL_GET_FIT_COMPT, nasid, index, fitentry,
+			banbuf, banlen, 0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * Initialize the SAL components of the system controller
+ * communication driver; specifically pass in a sizable buffer that
+ * can be used for allocation of subchannel queues as new subchannels
+ * are opened.  "buf" points to the buffer, and "len" specifies its
+ * length.
+ */
+static inline int
+ia64_sn_irtr_init(nasid_t nasid, void *buf, int len)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INIT,
+			   (u64) nasid, (u64) buf, (u64) len, 0, 0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * Returns the nasid, subnode & slice corresponding to a SAPIC ID
+ *
+ *  In:
+ *	arg0 - SN_SAL_GET_SAPIC_INFO
+ *	arg1 - sapicid (lid >> 16) 
+ *  Out:
+ *	v0 - nasid
+ *	v1 - subnode
+ *	v2 - slice
+ */
+static inline u64
+ia64_sn_get_sapic_info(int sapicid, int *nasid, int *subnode, int *slice)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SAPIC_INFO, sapicid, 0, 0, 0, 0, 0, 0);
+
+/***** BEGIN HACK - temp til old proms no longer supported ********/
+	if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
+		if (nasid) *nasid = sapicid & 0xfff;
+		if (subnode) *subnode = (sapicid >> 13) & 1;
+		if (slice) *slice = (sapicid >> 12) & 3;
+		return 0;
+	}
+/***** END HACK *******/
+
+	if (ret_stuff.status < 0)
+		return ret_stuff.status;
+
+	if (nasid) *nasid = (int) ret_stuff.v0;
+	if (subnode) *subnode = (int) ret_stuff.v1;
+	if (slice) *slice = (int) ret_stuff.v2;
+	return 0;
+}
+ 
+/*
+ * Returns information about the HUB/SHUB.
+ *  In:
+ *	arg0 - SN_SAL_GET_SN_INFO
+ * 	arg1 - 0 (other values reserved for future use)
+ *  Out:
+ *	v0 
+ *		[7:0]   - shub type (0=shub1, 1=shub2)
+ *		[15:8]  - Log2 max number of nodes in entire system (includes
+ *			  C-bricks, I-bricks, etc)
+ *		[23:16] - Log2 of nodes per sharing domain			 
+ * 		[31:24] - partition ID
+ * 		[39:32] - coherency_id
+ * 		[47:40] - regionsize
+ *	v1 
+ *		[15:0]  - nasid mask (ex., 0x7ff for 11 bit nasid)
+ *	 	[23:15] - bit position of low nasid bit
+ */
+static inline u64
+ia64_sn_get_sn_info(int fc, u8 *shubtype, u16 *nasid_bitmask, u8 *nasid_shift, 
+		u8 *systemsize, u8 *sharing_domain_size, u8 *partid, u8 *coher, u8 *reg)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ret_stuff.status = 0;
+	ret_stuff.v0 = 0;
+	ret_stuff.v1 = 0;
+	ret_stuff.v2 = 0;
+	SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SN_INFO, fc, 0, 0, 0, 0, 0, 0);
+
+/***** BEGIN HACK - temp til old proms no longer supported ********/
+	if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
+		int nasid = get_sapicid() & 0xfff;
+#define SH_SHUB_ID_NODES_PER_BIT_MASK 0x001f000000000000UL
+#define SH_SHUB_ID_NODES_PER_BIT_SHFT 48
+		if (shubtype) *shubtype = 0;
+		if (nasid_bitmask) *nasid_bitmask = 0x7ff;
+		if (nasid_shift) *nasid_shift = 38;
+		if (systemsize) *systemsize = 10;
+		if (sharing_domain_size) *sharing_domain_size = 8;
+		if (partid) *partid = ia64_sn_sysctl_partition_get(nasid);
+		if (coher) *coher = nasid >> 9;
+		if (reg) *reg = (HUB_L((u64 *) LOCAL_MMR_ADDR(SH1_SHUB_ID)) & SH_SHUB_ID_NODES_PER_BIT_MASK) >>
+			SH_SHUB_ID_NODES_PER_BIT_SHFT;
+		return 0;
+	}
+/***** END HACK *******/
+
+	if (ret_stuff.status < 0)
+		return ret_stuff.status;
+
+	if (shubtype) *shubtype = ret_stuff.v0 & 0xff;
+	if (systemsize) *systemsize = (ret_stuff.v0 >> 8) & 0xff;
+	if (sharing_domain_size) *sharing_domain_size = (ret_stuff.v0 >> 16) & 0xff;
+	if (partid) *partid = (ret_stuff.v0 >> 24) & 0xff;
+	if (coher) *coher = (ret_stuff.v0 >> 32) & 0xff;
+	if (reg) *reg = (ret_stuff.v0 >> 40) & 0xff;
+	if (nasid_bitmask) *nasid_bitmask = (ret_stuff.v1 & 0xffff);
+	if (nasid_shift) *nasid_shift = (ret_stuff.v1 >> 16) & 0xff;
+	return 0;
+}
+ 
+/*
+ * This is the access point to the Altix PROM hardware performance
+ * and status monitoring interface. For info on using this, see
+ * arch/ia64/include/asm/sn/sn2/sn_hwperf.h
+ */
+static inline int
+ia64_sn_hwperf_op(nasid_t nasid, u64 opcode, u64 a0, u64 a1, u64 a2,
+                  u64 a3, u64 a4, int *v0)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_NOLOCK(rv, SN_SAL_HWPERF_OP, (u64)nasid,
+		opcode, a0, a1, a2, a3, a4);
+	if (v0)
+		*v0 = (int) rv.v0;
+	return (int) rv.status;
+}
+
+static inline int
+ia64_sn_ioif_get_pci_topology(u64 buf, u64 len)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_NOLOCK(rv, SN_SAL_IOIF_GET_PCI_TOPOLOGY, buf, len, 0, 0, 0, 0, 0);
+	return (int) rv.status;
+}
+
+/*
+ * BTE error recovery is implemented in SAL
+ */
+static inline int
+ia64_sn_bte_recovery(nasid_t nasid)
+{
+	struct ia64_sal_retval rv;
+
+	rv.status = 0;
+	SAL_CALL_NOLOCK(rv, SN_SAL_BTE_RECOVER, (u64)nasid, 0, 0, 0, 0, 0, 0);
+	if (rv.status == SALRET_NOT_IMPLEMENTED)
+		return 0;
+	return (int) rv.status;
+}
+
+static inline int
+ia64_sn_is_fake_prom(void)
+{
+	struct ia64_sal_retval rv;
+	SAL_CALL_NOLOCK(rv, SN_SAL_FAKE_PROM, 0, 0, 0, 0, 0, 0, 0);
+	return (rv.status == 0);
+}
+
+static inline int
+ia64_sn_get_prom_feature_set(int set, unsigned long *feature_set)
+{
+	struct ia64_sal_retval rv;
+
+	SAL_CALL_NOLOCK(rv, SN_SAL_GET_PROM_FEATURE_SET, set, 0, 0, 0, 0, 0, 0);
+	if (rv.status != 0)
+		return rv.status;
+	*feature_set = rv.v0;
+	return 0;
+}
+
+static inline int
+ia64_sn_set_os_feature(int feature)
+{
+	struct ia64_sal_retval rv;
+
+	SAL_CALL_NOLOCK(rv, SN_SAL_SET_OS_FEATURE_SET, feature, 0, 0, 0, 0, 0, 0);
+	return rv.status;
+}
+
+static inline int
+sn_inject_error(u64 paddr, u64 *data, u64 *ecc)
+{
+	struct ia64_sal_retval ret_stuff;
+
+	ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_INJECT_ERROR, paddr, (u64)data,
+				(u64)ecc, 0, 0, 0, 0);
+	return ret_stuff.status;
+}
+
+static inline int
+ia64_sn_set_cpu_number(int cpu)
+{
+	struct ia64_sal_retval rv;
+
+	SAL_CALL_NOLOCK(rv, SN_SAL_SET_CPU_NUMBER, cpu, 0, 0, 0, 0, 0, 0);
+	return rv.status;
+}
+static inline int
+ia64_sn_kernel_launch_event(void)
+{
+ 	struct ia64_sal_retval rv;
+	SAL_CALL_NOLOCK(rv, SN_SAL_KERNEL_LAUNCH_EVENT, 0, 0, 0, 0, 0, 0, 0);
+	return rv.status;
+}
+#endif /* _ASM_IA64_SN_SN_SAL_H */
diff --git a/arch/ia64/include/asm/sn/tioca.h b/arch/ia64/include/asm/sn/tioca.h
new file mode 100644
index 000000000000..666222d7f0f6
--- /dev/null
+++ b/arch/ia64/include/asm/sn/tioca.h
@@ -0,0 +1,596 @@
+#ifndef _ASM_IA64_SN_TIO_TIOCA_H
+#define _ASM_IA64_SN_TIO_TIOCA_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+
+#define TIOCA_PART_NUM	0xE020
+#define TIOCA_MFGR_NUM	0x24
+#define TIOCA_REV_A	0x1
+
+/*
+ * Register layout for TIO:CA.  See below for bitmasks for each register.
+ */
+
+struct tioca {
+	u64	ca_id;				/* 0x000000 */
+	u64	ca_control1;			/* 0x000008 */
+	u64	ca_control2;			/* 0x000010 */
+	u64	ca_status1;			/* 0x000018 */
+	u64	ca_status2;			/* 0x000020 */
+	u64	ca_gart_aperature;		/* 0x000028 */
+	u64	ca_gfx_detach;			/* 0x000030 */
+	u64	ca_inta_dest_addr;		/* 0x000038 */
+	u64	ca_intb_dest_addr;		/* 0x000040 */
+	u64	ca_err_int_dest_addr;		/* 0x000048 */
+	u64	ca_int_status;			/* 0x000050 */
+	u64	ca_int_status_alias;		/* 0x000058 */
+	u64	ca_mult_error;			/* 0x000060 */
+	u64	ca_mult_error_alias;		/* 0x000068 */
+	u64	ca_first_error;			/* 0x000070 */
+	u64	ca_int_mask;			/* 0x000078 */
+	u64	ca_crm_pkterr_type;		/* 0x000080 */
+	u64	ca_crm_pkterr_type_alias;	/* 0x000088 */
+	u64	ca_crm_ct_error_detail_1;	/* 0x000090 */
+	u64	ca_crm_ct_error_detail_2;	/* 0x000098 */
+	u64	ca_crm_tnumto;			/* 0x0000A0 */
+	u64	ca_gart_err;			/* 0x0000A8 */
+	u64	ca_pcierr_type;			/* 0x0000B0 */
+	u64	ca_pcierr_addr;			/* 0x0000B8 */
+
+	u64	ca_pad_0000C0[3];		/* 0x0000{C0..D0} */
+
+	u64	ca_pci_rd_buf_flush;		/* 0x0000D8 */
+	u64	ca_pci_dma_addr_extn;		/* 0x0000E0 */
+	u64	ca_agp_dma_addr_extn;		/* 0x0000E8 */
+	u64	ca_force_inta;			/* 0x0000F0 */
+	u64	ca_force_intb;			/* 0x0000F8 */
+	u64	ca_debug_vector_sel;		/* 0x000100 */
+	u64	ca_debug_mux_core_sel;		/* 0x000108 */
+	u64	ca_debug_mux_pci_sel;		/* 0x000110 */
+	u64	ca_debug_domain_sel;		/* 0x000118 */
+
+	u64	ca_pad_000120[28];		/* 0x0001{20..F8} */
+
+	u64	ca_gart_ptr_table;		/* 0x200 */
+	u64	ca_gart_tlb_addr[8];		/* 0x2{08..40} */
+};
+
+/*
+ * Mask/shift definitions for TIO:CA registers.  The convention here is
+ * to mainly use the names as they appear in the "TIO AEGIS Programmers'
+ * Reference" with a CA_ prefix added.  Some exceptions were made to fix
+ * duplicate field names or to generalize fields that are common to
+ * different registers (ca_debug_mux_core_sel and ca_debug_mux_pci_sel for
+ * example).
+ *
+ * Fields consisting of a single bit have a single #define have a single
+ * macro declaration to mask the bit.  Fields consisting of multiple bits
+ * have two declarations: one to mask the proper bits in a register, and 
+ * a second with the suffix "_SHFT" to identify how far the mask needs to
+ * be shifted right to get its base value.
+ */
+
+/* ==== ca_control1 */
+#define CA_SYS_BIG_END			(1ull << 0)
+#define CA_DMA_AGP_SWAP			(1ull << 1)
+#define CA_DMA_PCI_SWAP			(1ull << 2)
+#define CA_PIO_IO_SWAP			(1ull << 3)
+#define CA_PIO_MEM_SWAP			(1ull << 4)
+#define CA_GFX_WR_SWAP			(1ull << 5)
+#define CA_AGP_FW_ENABLE		(1ull << 6)
+#define CA_AGP_CAL_CYCLE		(0x7ull << 7)
+#define CA_AGP_CAL_CYCLE_SHFT		7
+#define CA_AGP_CAL_PRSCL_BYP		(1ull << 10)
+#define CA_AGP_INIT_CAL_ENB		(1ull << 11)
+#define CA_INJ_ADDR_PERR		(1ull << 12)
+#define CA_INJ_DATA_PERR		(1ull << 13)
+	/* bits 15:14 unused */
+#define CA_PCIM_IO_NBE_AD		(0x7ull << 16)
+#define CA_PCIM_IO_NBE_AD_SHFT		16
+#define CA_PCIM_FAST_BTB_ENB		(1ull << 19)
+	/* bits 23:20 unused */
+#define CA_PIO_ADDR_OFFSET		(0xffull << 24)
+#define CA_PIO_ADDR_OFFSET_SHFT		24
+	/* bits 35:32 unused */
+#define CA_AGPDMA_OP_COMBDELAY		(0x1full << 36)
+#define CA_AGPDMA_OP_COMBDELAY_SHFT	36
+	/* bit 41 unused */
+#define CA_AGPDMA_OP_ENB_COMBDELAY	(1ull << 42)
+#define	CA_PCI_INT_LPCNT		(0xffull << 44)
+#define CA_PCI_INT_LPCNT_SHFT		44
+	/* bits 63:52 unused */
+
+/* ==== ca_control2 */
+#define CA_AGP_LATENCY_TO		(0xffull << 0)
+#define CA_AGP_LATENCY_TO_SHFT		0
+#define CA_PCI_LATENCY_TO		(0xffull << 8)
+#define CA_PCI_LATENCY_TO_SHFT		8
+#define CA_PCI_MAX_RETRY		(0x3ffull << 16)
+#define CA_PCI_MAX_RETRY_SHFT		16
+	/* bits 27:26 unused */
+#define CA_RT_INT_EN			(0x3ull << 28)
+#define CA_RT_INT_EN_SHFT			28
+#define CA_MSI_INT_ENB			(1ull << 30)
+#define CA_PCI_ARB_ERR_ENB		(1ull << 31)
+#define CA_GART_MEM_PARAM		(0x3ull << 32)
+#define CA_GART_MEM_PARAM_SHFT		32
+#define CA_GART_RD_PREFETCH_ENB		(1ull << 34)
+#define CA_GART_WR_PREFETCH_ENB		(1ull << 35)
+#define CA_GART_FLUSH_TLB		(1ull << 36)
+	/* bits 39:37 unused */
+#define CA_CRM_TNUMTO_PERIOD		(0x1fffull << 40)
+#define CA_CRM_TNUMTO_PERIOD_SHFT	40
+	/* bits 55:53 unused */
+#define CA_CRM_TNUMTO_ENB		(1ull << 56)
+#define CA_CRM_PRESCALER_BYP		(1ull << 57)
+	/* bits 59:58 unused */
+#define CA_CRM_MAX_CREDIT		(0x7ull << 60)
+#define CA_CRM_MAX_CREDIT_SHFT		60
+	/* bit 63 unused */
+
+/* ==== ca_status1 */
+#define CA_CORELET_ID			(0x3ull << 0)
+#define CA_CORELET_ID_SHFT		0
+#define CA_INTA_N			(1ull << 2)
+#define CA_INTB_N			(1ull << 3)
+#define CA_CRM_CREDIT_AVAIL		(0x7ull << 4)
+#define CA_CRM_CREDIT_AVAIL_SHFT	4
+	/* bit 7 unused */
+#define CA_CRM_SPACE_AVAIL		(0x7full << 8)
+#define CA_CRM_SPACE_AVAIL_SHFT		8
+	/* bit 15 unused */
+#define CA_GART_TLB_VAL			(0xffull << 16)
+#define CA_GART_TLB_VAL_SHFT		16
+	/* bits 63:24 unused */
+
+/* ==== ca_status2 */
+#define CA_GFX_CREDIT_AVAIL		(0xffull << 0)
+#define CA_GFX_CREDIT_AVAIL_SHFT	0
+#define CA_GFX_OPQ_AVAIL		(0xffull << 8)
+#define CA_GFX_OPQ_AVAIL_SHFT		8
+#define CA_GFX_WRBUFF_AVAIL		(0xffull << 16)
+#define CA_GFX_WRBUFF_AVAIL_SHFT	16
+#define CA_ADMA_OPQ_AVAIL		(0xffull << 24)
+#define CA_ADMA_OPQ_AVAIL_SHFT		24
+#define CA_ADMA_WRBUFF_AVAIL		(0xffull << 32)
+#define CA_ADMA_WRBUFF_AVAIL_SHFT	32
+#define CA_ADMA_RDBUFF_AVAIL		(0x7full << 40)
+#define CA_ADMA_RDBUFF_AVAIL_SHFT	40
+#define CA_PCI_PIO_OP_STAT		(1ull << 47)
+#define CA_PDMA_OPQ_AVAIL		(0xfull << 48)
+#define CA_PDMA_OPQ_AVAIL_SHFT		48
+#define CA_PDMA_WRBUFF_AVAIL		(0xfull << 52)
+#define CA_PDMA_WRBUFF_AVAIL_SHFT	52
+#define CA_PDMA_RDBUFF_AVAIL		(0x3ull << 56)
+#define CA_PDMA_RDBUFF_AVAIL_SHFT	56
+	/* bits 63:58 unused */
+
+/* ==== ca_gart_aperature */
+#define CA_GART_AP_ENB_AGP		(1ull << 0)
+#define CA_GART_PAGE_SIZE		(1ull << 1)
+#define CA_GART_AP_ENB_PCI		(1ull << 2)
+	/* bits 11:3 unused */
+#define CA_GART_AP_SIZE			(0x3ffull << 12)
+#define CA_GART_AP_SIZE_SHFT		12
+#define CA_GART_AP_BASE			(0x3ffffffffffull << 22)
+#define CA_GART_AP_BASE_SHFT		22
+
+/* ==== ca_inta_dest_addr
+   ==== ca_intb_dest_addr 
+   ==== ca_err_int_dest_addr */
+	/* bits 2:0 unused */
+#define CA_INT_DEST_ADDR		(0x7ffffffffffffull << 3)
+#define CA_INT_DEST_ADDR_SHFT		3
+	/* bits 55:54 unused */
+#define CA_INT_DEST_VECT		(0xffull << 56)
+#define CA_INT_DEST_VECT_SHFT		56
+
+/* ==== ca_int_status */
+/* ==== ca_int_status_alias */
+/* ==== ca_mult_error */
+/* ==== ca_mult_error_alias */
+/* ==== ca_first_error */
+/* ==== ca_int_mask */
+#define CA_PCI_ERR			(1ull << 0)
+	/* bits 3:1 unused */
+#define CA_GART_FETCH_ERR		(1ull << 4)
+#define CA_GFX_WR_OVFLW			(1ull << 5)
+#define CA_PIO_REQ_OVFLW		(1ull << 6)
+#define CA_CRM_PKTERR			(1ull << 7)
+#define CA_CRM_DVERR			(1ull << 8)
+#define CA_TNUMTO			(1ull << 9)
+#define CA_CXM_RSP_CRED_OVFLW		(1ull << 10)
+#define CA_CXM_REQ_CRED_OVFLW		(1ull << 11)
+#define CA_PIO_INVALID_ADDR		(1ull << 12)
+#define CA_PCI_ARB_TO			(1ull << 13)
+#define CA_AGP_REQ_OFLOW		(1ull << 14)
+#define CA_SBA_TYPE1_ERR		(1ull << 15)
+	/* bit 16 unused */
+#define CA_INTA				(1ull << 17)
+#define CA_INTB				(1ull << 18)
+#define CA_MULT_INTA			(1ull << 19)
+#define CA_MULT_INTB			(1ull << 20)
+#define CA_GFX_CREDIT_OVFLW		(1ull << 21)
+	/* bits 63:22 unused */
+
+/* ==== ca_crm_pkterr_type */
+/* ==== ca_crm_pkterr_type_alias */
+#define CA_CRM_PKTERR_SBERR_HDR		(1ull << 0)
+#define CA_CRM_PKTERR_DIDN		(1ull << 1)
+#define CA_CRM_PKTERR_PACTYPE		(1ull << 2)
+#define CA_CRM_PKTERR_INV_TNUM		(1ull << 3)
+#define CA_CRM_PKTERR_ADDR_RNG		(1ull << 4)
+#define CA_CRM_PKTERR_ADDR_ALGN		(1ull << 5)
+#define CA_CRM_PKTERR_HDR_PARAM		(1ull << 6)
+#define CA_CRM_PKTERR_CW_ERR		(1ull << 7)
+#define CA_CRM_PKTERR_SBERR_NH		(1ull << 8)
+#define CA_CRM_PKTERR_EARLY_TERM	(1ull << 9)
+#define CA_CRM_PKTERR_EARLY_TAIL	(1ull << 10)
+#define CA_CRM_PKTERR_MSSNG_TAIL	(1ull << 11)
+#define CA_CRM_PKTERR_MSSNG_HDR		(1ull << 12)
+	/* bits 15:13 unused */
+#define CA_FIRST_CRM_PKTERR_SBERR_HDR	(1ull << 16)
+#define CA_FIRST_CRM_PKTERR_DIDN	(1ull << 17)
+#define CA_FIRST_CRM_PKTERR_PACTYPE	(1ull << 18)
+#define CA_FIRST_CRM_PKTERR_INV_TNUM	(1ull << 19)
+#define CA_FIRST_CRM_PKTERR_ADDR_RNG	(1ull << 20)
+#define CA_FIRST_CRM_PKTERR_ADDR_ALGN	(1ull << 21)
+#define CA_FIRST_CRM_PKTERR_HDR_PARAM	(1ull << 22)
+#define CA_FIRST_CRM_PKTERR_CW_ERR	(1ull << 23)
+#define CA_FIRST_CRM_PKTERR_SBERR_NH	(1ull << 24)
+#define CA_FIRST_CRM_PKTERR_EARLY_TERM	(1ull << 25)
+#define CA_FIRST_CRM_PKTERR_EARLY_TAIL	(1ull << 26)
+#define CA_FIRST_CRM_PKTERR_MSSNG_TAIL	(1ull << 27)
+#define CA_FIRST_CRM_PKTERR_MSSNG_HDR	(1ull << 28)
+	/* bits 63:29 unused */
+
+/* ==== ca_crm_ct_error_detail_1 */
+#define CA_PKT_TYPE			(0xfull << 0)
+#define CA_PKT_TYPE_SHFT		0
+#define CA_SRC_ID			(0x3ull << 4)
+#define CA_SRC_ID_SHFT			4
+#define CA_DATA_SZ			(0x3ull << 6)
+#define CA_DATA_SZ_SHFT			6
+#define CA_TNUM				(0xffull << 8)
+#define CA_TNUM_SHFT			8
+#define CA_DW_DATA_EN			(0xffull << 16)
+#define CA_DW_DATA_EN_SHFT		16
+#define CA_GFX_CRED			(0xffull << 24)
+#define CA_GFX_CRED_SHFT		24
+#define CA_MEM_RD_PARAM			(0x3ull << 32)
+#define CA_MEM_RD_PARAM_SHFT		32
+#define CA_PIO_OP			(1ull << 34)
+#define CA_CW_ERR			(1ull << 35)
+	/* bits 62:36 unused */
+#define CA_VALID			(1ull << 63)
+
+/* ==== ca_crm_ct_error_detail_2 */
+	/* bits 2:0 unused */
+#define CA_PKT_ADDR			(0x1fffffffffffffull << 3)
+#define CA_PKT_ADDR_SHFT		3
+	/* bits 63:56 unused */
+
+/* ==== ca_crm_tnumto */
+#define CA_CRM_TNUMTO_VAL		(0xffull << 0)
+#define CA_CRM_TNUMTO_VAL_SHFT		0
+#define CA_CRM_TNUMTO_WR		(1ull << 8)
+	/* bits 63:9 unused */
+
+/* ==== ca_gart_err */
+#define CA_GART_ERR_SOURCE		(0x3ull << 0)
+#define CA_GART_ERR_SOURCE_SHFT		0
+	/* bits 3:2 unused */
+#define CA_GART_ERR_ADDR		(0xfffffffffull << 4)
+#define CA_GART_ERR_ADDR_SHFT		4
+	/* bits 63:40 unused */
+
+/* ==== ca_pcierr_type */
+#define CA_PCIERR_DATA			(0xffffffffull << 0)
+#define CA_PCIERR_DATA_SHFT		0
+#define CA_PCIERR_ENB			(0xfull << 32)
+#define CA_PCIERR_ENB_SHFT		32
+#define CA_PCIERR_CMD			(0xfull << 36)
+#define CA_PCIERR_CMD_SHFT		36
+#define CA_PCIERR_A64			(1ull << 40)
+#define CA_PCIERR_SLV_SERR		(1ull << 41)
+#define CA_PCIERR_SLV_WR_PERR		(1ull << 42)
+#define CA_PCIERR_SLV_RD_PERR		(1ull << 43)
+#define CA_PCIERR_MST_SERR		(1ull << 44)
+#define CA_PCIERR_MST_WR_PERR		(1ull << 45)
+#define CA_PCIERR_MST_RD_PERR		(1ull << 46)
+#define CA_PCIERR_MST_MABT		(1ull << 47)
+#define CA_PCIERR_MST_TABT		(1ull << 48)
+#define CA_PCIERR_MST_RETRY_TOUT	(1ull << 49)
+
+#define CA_PCIERR_TYPES \
+	(CA_PCIERR_A64|CA_PCIERR_SLV_SERR| \
+	 CA_PCIERR_SLV_WR_PERR|CA_PCIERR_SLV_RD_PERR| \
+	 CA_PCIERR_MST_SERR|CA_PCIERR_MST_WR_PERR|CA_PCIERR_MST_RD_PERR| \
+	 CA_PCIERR_MST_MABT|CA_PCIERR_MST_TABT|CA_PCIERR_MST_RETRY_TOUT)
+
+	/* bits 63:50 unused */
+
+/* ==== ca_pci_dma_addr_extn */
+#define CA_UPPER_NODE_OFFSET		(0x3full << 0)
+#define CA_UPPER_NODE_OFFSET_SHFT	0
+	/* bits 7:6 unused */
+#define CA_CHIPLET_ID			(0x3ull << 8)
+#define CA_CHIPLET_ID_SHFT		8
+	/* bits 11:10 unused */
+#define CA_PCI_DMA_NODE_ID		(0xffffull << 12)
+#define CA_PCI_DMA_NODE_ID_SHFT		12
+	/* bits 27:26 unused */
+#define CA_PCI_DMA_PIO_MEM_TYPE		(1ull << 28)
+	/* bits 63:29 unused */
+
+
+/* ==== ca_agp_dma_addr_extn */
+	/* bits 19:0 unused */
+#define CA_AGP_DMA_NODE_ID		(0xffffull << 20)
+#define CA_AGP_DMA_NODE_ID_SHFT		20
+	/* bits 27:26 unused */
+#define CA_AGP_DMA_PIO_MEM_TYPE		(1ull << 28)
+	/* bits 63:29 unused */
+
+/* ==== ca_debug_vector_sel */
+#define CA_DEBUG_MN_VSEL		(0xfull << 0)
+#define CA_DEBUG_MN_VSEL_SHFT		0
+#define CA_DEBUG_PP_VSEL		(0xfull << 4)
+#define CA_DEBUG_PP_VSEL_SHFT		4
+#define CA_DEBUG_GW_VSEL		(0xfull << 8)
+#define CA_DEBUG_GW_VSEL_SHFT		8
+#define CA_DEBUG_GT_VSEL		(0xfull << 12)
+#define CA_DEBUG_GT_VSEL_SHFT		12
+#define CA_DEBUG_PD_VSEL		(0xfull << 16)
+#define CA_DEBUG_PD_VSEL_SHFT		16
+#define CA_DEBUG_AD_VSEL		(0xfull << 20)
+#define CA_DEBUG_AD_VSEL_SHFT		20
+#define CA_DEBUG_CX_VSEL		(0xfull << 24)
+#define CA_DEBUG_CX_VSEL_SHFT		24
+#define CA_DEBUG_CR_VSEL		(0xfull << 28)
+#define CA_DEBUG_CR_VSEL_SHFT		28
+#define CA_DEBUG_BA_VSEL		(0xfull << 32)
+#define CA_DEBUG_BA_VSEL_SHFT		32
+#define CA_DEBUG_PE_VSEL		(0xfull << 36)
+#define CA_DEBUG_PE_VSEL_SHFT		36
+#define CA_DEBUG_BO_VSEL		(0xfull << 40)
+#define CA_DEBUG_BO_VSEL_SHFT		40
+#define CA_DEBUG_BI_VSEL		(0xfull << 44)
+#define CA_DEBUG_BI_VSEL_SHFT		44
+#define CA_DEBUG_AS_VSEL		(0xfull << 48)
+#define CA_DEBUG_AS_VSEL_SHFT		48
+#define CA_DEBUG_PS_VSEL		(0xfull << 52)
+#define CA_DEBUG_PS_VSEL_SHFT		52
+#define CA_DEBUG_PM_VSEL		(0xfull << 56)
+#define CA_DEBUG_PM_VSEL_SHFT		56
+	/* bits 63:60 unused */
+
+/* ==== ca_debug_mux_core_sel */
+/* ==== ca_debug_mux_pci_sel */
+#define CA_DEBUG_MSEL0			(0x7ull << 0)
+#define CA_DEBUG_MSEL0_SHFT		0
+	/* bit 3 unused */
+#define CA_DEBUG_NSEL0			(0x7ull << 4)
+#define CA_DEBUG_NSEL0_SHFT		4
+	/* bit 7 unused */
+#define CA_DEBUG_MSEL1			(0x7ull << 8)
+#define CA_DEBUG_MSEL1_SHFT		8
+	/* bit 11 unused */
+#define CA_DEBUG_NSEL1			(0x7ull << 12)
+#define CA_DEBUG_NSEL1_SHFT		12
+	/* bit 15 unused */
+#define CA_DEBUG_MSEL2			(0x7ull << 16)
+#define CA_DEBUG_MSEL2_SHFT		16
+	/* bit 19 unused */
+#define CA_DEBUG_NSEL2			(0x7ull << 20)
+#define CA_DEBUG_NSEL2_SHFT		20
+	/* bit 23 unused */
+#define CA_DEBUG_MSEL3			(0x7ull << 24)
+#define CA_DEBUG_MSEL3_SHFT		24
+	/* bit 27 unused */
+#define CA_DEBUG_NSEL3			(0x7ull << 28)
+#define CA_DEBUG_NSEL3_SHFT		28
+	/* bit 31 unused */
+#define CA_DEBUG_MSEL4			(0x7ull << 32)
+#define CA_DEBUG_MSEL4_SHFT		32
+	/* bit 35 unused */
+#define CA_DEBUG_NSEL4			(0x7ull << 36)
+#define CA_DEBUG_NSEL4_SHFT		36
+	/* bit 39 unused */
+#define CA_DEBUG_MSEL5			(0x7ull << 40)
+#define CA_DEBUG_MSEL5_SHFT		40
+	/* bit 43 unused */
+#define CA_DEBUG_NSEL5			(0x7ull << 44)
+#define CA_DEBUG_NSEL5_SHFT		44
+	/* bit 47 unused */
+#define CA_DEBUG_MSEL6			(0x7ull << 48)
+#define CA_DEBUG_MSEL6_SHFT		48
+	/* bit 51 unused */
+#define CA_DEBUG_NSEL6			(0x7ull << 52)
+#define CA_DEBUG_NSEL6_SHFT		52
+	/* bit 55 unused */
+#define CA_DEBUG_MSEL7			(0x7ull << 56)
+#define CA_DEBUG_MSEL7_SHFT		56
+	/* bit 59 unused */
+#define CA_DEBUG_NSEL7			(0x7ull << 60)
+#define CA_DEBUG_NSEL7_SHFT		60
+	/* bit 63 unused */
+
+
+/* ==== ca_debug_domain_sel */
+#define CA_DEBUG_DOMAIN_L		(1ull << 0)
+#define CA_DEBUG_DOMAIN_H		(1ull << 1)
+	/* bits 63:2 unused */
+
+/* ==== ca_gart_ptr_table */
+#define CA_GART_PTR_VAL			(1ull << 0)
+	/* bits 11:1 unused */
+#define CA_GART_PTR_ADDR		(0xfffffffffffull << 12)
+#define CA_GART_PTR_ADDR_SHFT		12
+	/* bits 63:56 unused */
+
+/* ==== ca_gart_tlb_addr[0-7] */
+#define CA_GART_TLB_ADDR		(0xffffffffffffffull << 0)
+#define CA_GART_TLB_ADDR_SHFT		0
+	/* bits 62:56 unused */
+#define CA_GART_TLB_ENTRY_VAL		(1ull << 63)
+
+/*
+ * PIO address space ranges for TIO:CA
+ */
+
+/* CA internal registers */
+#define CA_PIO_ADMIN			0x00000000
+#define CA_PIO_ADMIN_LEN		0x00010000
+
+/* GFX Write Buffer - Diagnostics */
+#define CA_PIO_GFX			0x00010000
+#define CA_PIO_GFX_LEN			0x00010000
+
+/* AGP DMA Write Buffer - Diagnostics */
+#define CA_PIO_AGP_DMAWRITE		0x00020000
+#define CA_PIO_AGP_DMAWRITE_LEN		0x00010000
+
+/* AGP DMA READ Buffer - Diagnostics */
+#define CA_PIO_AGP_DMAREAD		0x00030000
+#define CA_PIO_AGP_DMAREAD_LEN		0x00010000
+
+/* PCI Config Type 0 */
+#define CA_PIO_PCI_TYPE0_CONFIG		0x01000000
+#define CA_PIO_PCI_TYPE0_CONFIG_LEN	0x01000000
+
+/* PCI Config Type 1 */
+#define CA_PIO_PCI_TYPE1_CONFIG		0x02000000
+#define CA_PIO_PCI_TYPE1_CONFIG_LEN	0x01000000
+
+/* PCI I/O Cycles - mapped to PCI Address 0x00000000-0x04ffffff */
+#define CA_PIO_PCI_IO			0x03000000
+#define CA_PIO_PCI_IO_LEN		0x05000000
+
+/* PCI MEM Cycles - mapped to PCI with CA_PIO_ADDR_OFFSET of ca_control1 */
+/*	use Fast Write if enabled and coretalk packet type is a GFX request */
+#define CA_PIO_PCI_MEM_OFFSET		0x08000000
+#define CA_PIO_PCI_MEM_OFFSET_LEN	0x08000000
+
+/* PCI MEM Cycles - mapped to PCI Address 0x00000000-0xbfffffff */
+/*	use Fast Write if enabled and coretalk packet type is a GFX request */
+#define CA_PIO_PCI_MEM			0x40000000
+#define CA_PIO_PCI_MEM_LEN		0xc0000000
+
+/*
+ * DMA space
+ *
+ * The CA aperature (ie. bus address range) mapped by the GART is segmented into
+ * two parts.  The lower portion of the aperature is used for mapping 32 bit
+ * PCI addresses which are managed by the dma interfaces in this file.  The
+ * upper poprtion of the aperature is used for mapping 48 bit AGP addresses.
+ * The AGP portion of the aperature is managed by the agpgart_be.c driver
+ * in drivers/linux/agp.  There are ca-specific hooks in that driver to
+ * manipulate the gart, but management of the AGP portion of the aperature
+ * is the responsibility of that driver.
+ *
+ * CA allows three main types of DMA mapping:
+ *
+ * PCI 64-bit	Managed by this driver
+ * PCI 32-bit 	Managed by this driver
+ * AGP 48-bit	Managed by hooks in the /dev/agpgart driver
+ *
+ * All of the above can optionally be remapped through the GART.  The following
+ * table lists the combinations of addressing types and GART remapping that
+ * is currently supported by the driver (h/w supports all, s/w limits this):
+ *
+ *		PCI64		PCI32		AGP48
+ * GART		no		yes		yes
+ * Direct	yes		yes		no
+ *
+ * GART remapping of PCI64 is not done because there is no need to.  The
+ * 64 bit PCI address holds all of the information necessary to target any
+ * memory in the system.
+ *
+ * AGP48 is always mapped through the GART.  Management of the AGP48 portion
+ * of the aperature is the responsibility of code in the agpgart_be driver.
+ *
+ * The non-64 bit bus address space will currently be partitioned like this:
+ *
+ *	0xffff_ffff_ffff	+--------
+ *				| AGP48 direct
+ *				| Space managed by this driver
+ *	CA_AGP_DIRECT_BASE	+--------
+ *				| AGP GART mapped (gfx aperature)
+ *				| Space managed by /dev/agpgart driver
+ *				| This range is exposed to the agpgart
+ * 				| driver as the "graphics aperature"
+ *	CA_AGP_MAPPED_BASE	+-----
+ *				| PCI GART mapped
+ *				| Space managed by this driver		
+ *	CA_PCI32_MAPPED_BASE	+----
+ *				| PCI32 direct
+ *				| Space managed by this driver
+ *	0xC000_0000		+--------
+ *	(CA_PCI32_DIRECT_BASE)
+ *
+ * The bus address range CA_PCI32_MAPPED_BASE through CA_AGP_DIRECT_BASE
+ * is what we call the CA aperature.  Addresses falling in this range will
+ * be remapped using the GART.
+ *
+ * The bus address range CA_AGP_MAPPED_BASE through CA_AGP_DIRECT_BASE
+ * is what we call the graphics aperature.  This is a subset of the CA
+ * aperature and is under the control of the agpgart_be driver.
+ *
+ * CA_PCI32_MAPPED_BASE, CA_AGP_MAPPED_BASE, and CA_AGP_DIRECT_BASE are
+ * somewhat arbitrary values.  The known constraints on choosing these is:
+ *
+ * 1)  CA_AGP_DIRECT_BASE-CA_PCI32_MAPPED_BASE+1 (the CA aperature size)
+ *     must be one of the values supported by the ca_gart_aperature register.
+ *     Currently valid values are: 4MB through 4096MB in powers of 2 increments
+ *
+ * 2)  CA_AGP_DIRECT_BASE-CA_AGP_MAPPED_BASE+1 (the gfx aperature size)
+ *     must be in MB units since that's what the agpgart driver assumes.
+ */
+
+/*
+ * Define Bus DMA ranges.  These are configurable (see constraints above)
+ * and will probably need tuning based on experience.
+ */
+
+
+/*
+ * 11/24/03
+ * CA has an addressing glitch w.r.t. PCI direct 32 bit DMA that makes it
+ * generally unusable.  The problem is that for PCI direct 32 
+ * DMA's, all 32 bits of the bus address are used to form the lower 32 bits
+ * of the coretalk address, and coretalk bits 38:32 come from a register.
+ * Since only PCI bus addresses 0xC0000000-0xFFFFFFFF (1GB) are available
+ * for DMA (the rest is allocated to PIO), host node addresses need to be
+ * such that their lower 32 bits fall in the 0xC0000000-0xffffffff range
+ * as well.  So there can be no PCI32 direct DMA below 3GB!!  For this
+ * reason we set the CA_PCI32_DIRECT_SIZE to 0 which essentially makes
+ * tioca_dma_direct32() a noop but preserves the code flow should this issue
+ * be fixed in a respin.
+ *
+ * For now, all PCI32 DMA's must be mapped through the GART.
+ */
+
+#define CA_PCI32_DIRECT_BASE	0xC0000000UL	/* BASE not configurable */
+#define CA_PCI32_DIRECT_SIZE	0x00000000UL	/* 0 MB */
+
+#define CA_PCI32_MAPPED_BASE	0xC0000000UL
+#define CA_PCI32_MAPPED_SIZE	0x40000000UL	/* 2GB */
+
+#define CA_AGP_MAPPED_BASE	0x80000000UL
+#define CA_AGP_MAPPED_SIZE	0x40000000UL	/* 2GB */
+
+#define CA_AGP_DIRECT_BASE	0x40000000UL	/* 2GB */
+#define CA_AGP_DIRECT_SIZE	0x40000000UL
+
+#define CA_APERATURE_BASE	(CA_AGP_MAPPED_BASE)
+#define CA_APERATURE_SIZE	(CA_AGP_MAPPED_SIZE+CA_PCI32_MAPPED_SIZE)
+
+#endif  /* _ASM_IA64_SN_TIO_TIOCA_H */
diff --git a/arch/ia64/include/asm/sn/tioca_provider.h b/arch/ia64/include/asm/sn/tioca_provider.h
new file mode 100644
index 000000000000..9a820ac61be3
--- /dev/null
+++ b/arch/ia64/include/asm/sn/tioca_provider.h
@@ -0,0 +1,207 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H
+#define _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H
+
+#include <asm/sn/tioca.h>
+
+/*
+ * WAR enables
+ * Defines for individual WARs. Each is a bitmask of applicable
+ * part revision numbers. (1 << 1) == rev A, (1 << 2) == rev B,
+ * (3 << 1) == (rev A or rev B), etc
+ */
+
+#define TIOCA_WAR_ENABLED(pv, tioca_common) \
+	((1 << tioca_common->ca_rev) & pv)
+
+  /* TIO:ICE:FRZ:Freezer loses a PIO data ucred on PIO RD RSP with CW error */
+#define PV907908 (1 << 1)
+  /* ATI config space problems after BIOS execution starts */
+#define PV908234 (1 << 1)
+  /* CA:AGPDMA write request data mismatch with ABC1CL merge */
+#define PV895469 (1 << 1)
+  /* TIO:CA TLB invalidate of written GART entries possibly not occurring in CA*/
+#define PV910244 (1 << 1)
+
+struct tioca_dmamap{
+	struct list_head	cad_list;	/* headed by ca_list */
+
+	dma_addr_t		cad_dma_addr;	/* Linux dma handle */
+	uint			cad_gart_entry; /* start entry in ca_gart_pagemap */
+	uint			cad_gart_size;	/* #entries for this map */
+};
+
+/*
+ * Kernel only fields.  Prom may look at this stuff for debugging only.
+ * Access this structure through the ca_kernel_private ptr.
+ */
+
+struct tioca_common ;
+
+struct tioca_kernel {
+	struct tioca_common	*ca_common;	/* tioca this belongs to */
+	struct list_head	ca_list;	/* list of all ca's */
+	struct list_head	ca_dmamaps;
+	spinlock_t		ca_lock;	/* Kernel lock */
+	cnodeid_t		ca_closest_node;
+	struct list_head	*ca_devices;	/* bus->devices */
+
+	/*
+	 * General GART stuff
+	 */
+	u64	ca_ap_size;		/* size of aperature in bytes */
+	u32	ca_gart_entries;	/* # u64 entries in gart */
+	u32	ca_ap_pagesize; 	/* aperature page size in bytes */
+	u64	ca_ap_bus_base; 	/* bus address of CA aperature */
+	u64	ca_gart_size;		/* gart size in bytes */
+	u64	*ca_gart;		/* gart table vaddr */
+	u64	ca_gart_coretalk_addr;	/* gart coretalk addr */
+	u8		ca_gart_iscoherent;	/* used in tioca_tlbflush */
+
+	/* PCI GART convenience values */
+	u64	ca_pciap_base;		/* pci aperature bus base address */
+	u64	ca_pciap_size;		/* pci aperature size (bytes) */
+	u64	ca_pcigart_base;	/* gfx GART bus base address */
+	u64	*ca_pcigart;		/* gfx GART vm address */
+	u32	ca_pcigart_entries;
+	u32	ca_pcigart_start;	/* PCI start index in ca_gart */
+	void		*ca_pcigart_pagemap;
+
+	/* AGP GART convenience values */
+	u64	ca_gfxap_base;		/* gfx aperature bus base address */
+	u64	ca_gfxap_size;		/* gfx aperature size (bytes) */
+	u64	ca_gfxgart_base;	/* gfx GART bus base address */
+	u64	*ca_gfxgart;		/* gfx GART vm address */
+	u32	ca_gfxgart_entries;
+	u32	ca_gfxgart_start;	/* agpgart start index in ca_gart */
+};
+
+/*
+ * Common tioca info shared between kernel and prom
+ *
+ * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES
+ * TO THE PROM VERSION.
+ */
+
+struct tioca_common {
+	struct pcibus_bussoft	ca_common;	/* common pciio header */
+
+	u32		ca_rev;
+	u32		ca_closest_nasid;
+
+	u64		ca_prom_private;
+	u64		ca_kernel_private;
+};
+
+/**
+ * tioca_paddr_to_gart - Convert an SGI coretalk address to a CA GART entry
+ * @paddr: page address to convert
+ *
+ * Convert a system [coretalk] address to a GART entry.  GART entries are
+ * formed using the following:
+ *
+ *     data = ( (1<<63) |  ( (REMAP_NODE_ID << 40) | (MD_CHIPLET_ID << 38) | 
+ * (REMAP_SYS_ADDR) ) >> 12 )
+ *
+ * DATA written to 1 GART TABLE Entry in system memory is remapped system
+ * addr for 1 page 
+ *
+ * The data is for coretalk address format right shifted 12 bits with a
+ * valid bit.
+ *
+ *	GART_TABLE_ENTRY [ 25:0 ]  -- REMAP_SYS_ADDRESS[37:12].
+ *	GART_TABLE_ENTRY [ 27:26 ] -- SHUB MD chiplet id.
+ *	GART_TABLE_ENTRY [ 41:28 ] -- REMAP_NODE_ID.
+ *	GART_TABLE_ENTRY [ 63 ]    -- Valid Bit 
+ */
+static inline u64
+tioca_paddr_to_gart(unsigned long paddr)
+{
+	/*
+	 * We are assuming right now that paddr already has the correct
+	 * format since the address from xtalk_dmaXXX should already have
+	 * NODE_ID, CHIPLET_ID, and SYS_ADDR in the correct locations.
+	 */
+
+	return ((paddr) >> 12) | (1UL << 63);
+}
+
+/**
+ * tioca_physpage_to_gart - Map a host physical page for SGI CA based DMA
+ * @page_addr: system page address to map
+ */
+
+static inline unsigned long
+tioca_physpage_to_gart(u64 page_addr)
+{
+	u64 coretalk_addr;
+
+	coretalk_addr = PHYS_TO_TIODMA(page_addr);
+	if (!coretalk_addr) {
+		return 0;
+	}
+
+	return tioca_paddr_to_gart(coretalk_addr);
+}
+
+/**
+ * tioca_tlbflush - invalidate cached SGI CA GART TLB entries
+ * @tioca_kernel: CA context 
+ *
+ * Invalidate tlb entries for a given CA GART.  Main complexity is to account
+ * for revA bug.
+ */
+static inline void
+tioca_tlbflush(struct tioca_kernel *tioca_kernel)
+{
+	volatile u64 tmp;
+	volatile struct tioca __iomem *ca_base;
+	struct tioca_common *tioca_common;
+
+	tioca_common = tioca_kernel->ca_common;
+	ca_base = (struct tioca __iomem *)tioca_common->ca_common.bs_base;
+
+	/*
+	 * Explicit flushes not needed if GART is in cached mode
+	 */
+	if (tioca_kernel->ca_gart_iscoherent) {
+		if (TIOCA_WAR_ENABLED(PV910244, tioca_common)) {
+			/*
+			 * PV910244:  RevA CA needs explicit flushes.
+			 * Need to put GART into uncached mode before
+			 * flushing otherwise the explicit flush is ignored.
+			 *
+			 * Alternate WAR would be to leave GART cached and
+			 * touch every CL aligned GART entry.
+			 */
+
+			__sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM);
+			__sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB);
+			__sn_setq_relaxed(&ca_base->ca_control2,
+			    (0x2ull << CA_GART_MEM_PARAM_SHFT));
+			tmp = __sn_readq_relaxed(&ca_base->ca_control2);
+		}
+
+		return;
+	}
+
+	/*
+	 * Gart in uncached mode ... need an explicit flush.
+	 */
+
+	__sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB);
+	tmp = __sn_readq_relaxed(&ca_base->ca_control2);
+}
+
+extern u32	tioca_gart_found;
+extern struct list_head tioca_list;
+extern int tioca_init_provider(void);
+extern void tioca_fastwrite_enable(struct tioca_kernel *tioca_kern);
+#endif /* _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H */
diff --git a/arch/ia64/include/asm/sn/tioce.h b/arch/ia64/include/asm/sn/tioce.h
new file mode 100644
index 000000000000..893468e1b41b
--- /dev/null
+++ b/arch/ia64/include/asm/sn/tioce.h
@@ -0,0 +1,760 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef __ASM_IA64_SN_TIOCE_H__
+#define __ASM_IA64_SN_TIOCE_H__
+
+/* CE ASIC part & mfgr information  */
+#define TIOCE_PART_NUM			0xCE00
+#define TIOCE_SRC_ID			0x01
+#define TIOCE_REV_A			0x1
+
+/* CE Virtual PPB Vendor/Device IDs */
+#define CE_VIRT_PPB_VENDOR_ID		0x10a9
+#define CE_VIRT_PPB_DEVICE_ID		0x4002
+
+/* CE Host Bridge Vendor/Device IDs */
+#define CE_HOST_BRIDGE_VENDOR_ID	0x10a9
+#define CE_HOST_BRIDGE_DEVICE_ID	0x4001
+
+
+#define TIOCE_NUM_M40_ATES		4096
+#define TIOCE_NUM_M3240_ATES		2048
+#define TIOCE_NUM_PORTS			2
+
+/*
+ * Register layout for TIOCE.  MMR offsets are shown at the far right of the
+ * structure definition.
+ */
+typedef volatile struct tioce {
+	/*
+	 * ADMIN : Administration Registers
+	 */
+	u64	ce_adm_id;				/* 0x000000 */
+	u64	ce_pad_000008;				/* 0x000008 */
+	u64	ce_adm_dyn_credit_status;		/* 0x000010 */
+	u64	ce_adm_last_credit_status;		/* 0x000018 */
+	u64	ce_adm_credit_limit;			/* 0x000020 */
+	u64	ce_adm_force_credit;			/* 0x000028 */
+	u64	ce_adm_control;				/* 0x000030 */
+	u64	ce_adm_mmr_chn_timeout;			/* 0x000038 */
+	u64	ce_adm_ssp_ure_timeout;			/* 0x000040 */
+	u64	ce_adm_ssp_dre_timeout;			/* 0x000048 */
+	u64	ce_adm_ssp_debug_sel;			/* 0x000050 */
+	u64	ce_adm_int_status;			/* 0x000058 */
+	u64	ce_adm_int_status_alias;		/* 0x000060 */
+	u64	ce_adm_int_mask;			/* 0x000068 */
+	u64	ce_adm_int_pending;			/* 0x000070 */
+	u64	ce_adm_force_int;			/* 0x000078 */
+	u64	ce_adm_ure_ups_buf_barrier_flush;	/* 0x000080 */
+	u64	ce_adm_int_dest[15];	    /* 0x000088 -- 0x0000F8 */
+	u64	ce_adm_error_summary;			/* 0x000100 */
+	u64	ce_adm_error_summary_alias;		/* 0x000108 */
+	u64	ce_adm_error_mask;			/* 0x000110 */
+	u64	ce_adm_first_error;			/* 0x000118 */
+	u64	ce_adm_error_overflow;			/* 0x000120 */
+	u64	ce_adm_error_overflow_alias;		/* 0x000128 */
+	u64	ce_pad_000130[2];	    /* 0x000130 -- 0x000138 */
+	u64	ce_adm_tnum_error;			/* 0x000140 */
+	u64	ce_adm_mmr_err_detail;			/* 0x000148 */
+	u64	ce_adm_msg_sram_perr_detail;		/* 0x000150 */
+	u64	ce_adm_bap_sram_perr_detail;		/* 0x000158 */
+	u64	ce_adm_ce_sram_perr_detail;		/* 0x000160 */
+	u64	ce_adm_ce_credit_oflow_detail;		/* 0x000168 */
+	u64	ce_adm_tx_link_idle_max_timer;		/* 0x000170 */
+	u64	ce_adm_pcie_debug_sel;			/* 0x000178 */
+	u64	ce_pad_000180[16];	    /* 0x000180 -- 0x0001F8 */
+
+	u64	ce_adm_pcie_debug_sel_top;		/* 0x000200 */
+	u64	ce_adm_pcie_debug_lat_sel_lo_top;	/* 0x000208 */
+	u64	ce_adm_pcie_debug_lat_sel_hi_top;	/* 0x000210 */
+	u64	ce_adm_pcie_debug_trig_sel_top;		/* 0x000218 */
+	u64	ce_adm_pcie_debug_trig_lat_sel_lo_top;	/* 0x000220 */
+	u64	ce_adm_pcie_debug_trig_lat_sel_hi_top;	/* 0x000228 */
+	u64	ce_adm_pcie_trig_compare_top;		/* 0x000230 */
+	u64	ce_adm_pcie_trig_compare_en_top;	/* 0x000238 */
+	u64	ce_adm_ssp_debug_sel_top;		/* 0x000240 */
+	u64	ce_adm_ssp_debug_lat_sel_lo_top;	/* 0x000248 */
+	u64	ce_adm_ssp_debug_lat_sel_hi_top;	/* 0x000250 */
+	u64	ce_adm_ssp_debug_trig_sel_top;		/* 0x000258 */
+	u64	ce_adm_ssp_debug_trig_lat_sel_lo_top;	/* 0x000260 */
+	u64	ce_adm_ssp_debug_trig_lat_sel_hi_top;	/* 0x000268 */
+	u64	ce_adm_ssp_trig_compare_top;		/* 0x000270 */
+	u64	ce_adm_ssp_trig_compare_en_top;		/* 0x000278 */
+	u64	ce_pad_000280[48];	    /* 0x000280 -- 0x0003F8 */
+
+	u64	ce_adm_bap_ctrl;			/* 0x000400 */
+	u64	ce_pad_000408[127];	    /* 0x000408 -- 0x0007F8 */
+
+	u64	ce_msg_buf_data63_0[35];    /* 0x000800 -- 0x000918 */
+	u64	ce_pad_000920[29];	    /* 0x000920 -- 0x0009F8 */
+
+	u64	ce_msg_buf_data127_64[35];  /* 0x000A00 -- 0x000B18 */
+	u64	ce_pad_000B20[29];	    /* 0x000B20 -- 0x000BF8 */
+
+	u64	ce_msg_buf_parity[35];	    /* 0x000C00 -- 0x000D18 */
+	u64	ce_pad_000D20[29];	    /* 0x000D20 -- 0x000DF8 */
+
+	u64	ce_pad_000E00[576];	    /* 0x000E00 -- 0x001FF8 */
+
+	/*
+	 * LSI : LSI's PCI Express Link Registers (Link#1 and Link#2)
+	 * Link#1 MMRs at start at 0x002000, Link#2 MMRs at 0x003000
+	 * NOTE: the comment offsets at far right: let 'z' = {2 or 3}
+	 */
+	#define ce_lsi(link_num)	ce_lsi[link_num-1]
+	struct ce_lsi_reg {
+		u64	ce_lsi_lpu_id;			/* 0x00z000 */
+		u64	ce_lsi_rst;			/* 0x00z008 */
+		u64	ce_lsi_dbg_stat;		/* 0x00z010 */
+		u64	ce_lsi_dbg_cfg;			/* 0x00z018 */
+		u64	ce_lsi_ltssm_ctrl;		/* 0x00z020 */
+		u64	ce_lsi_lk_stat;			/* 0x00z028 */
+		u64	ce_pad_00z030[2];   /* 0x00z030 -- 0x00z038 */
+		u64	ce_lsi_int_and_stat;		/* 0x00z040 */
+		u64	ce_lsi_int_mask;		/* 0x00z048 */
+		u64	ce_pad_00z050[22];  /* 0x00z050 -- 0x00z0F8 */
+		u64	ce_lsi_lk_perf_cnt_sel;		/* 0x00z100 */
+		u64	ce_pad_00z108;			/* 0x00z108 */
+		u64	ce_lsi_lk_perf_cnt_ctrl;	/* 0x00z110 */
+		u64	ce_pad_00z118;			/* 0x00z118 */
+		u64	ce_lsi_lk_perf_cnt1;		/* 0x00z120 */
+		u64	ce_lsi_lk_perf_cnt1_test;	/* 0x00z128 */
+		u64	ce_lsi_lk_perf_cnt2;		/* 0x00z130 */
+		u64	ce_lsi_lk_perf_cnt2_test;	/* 0x00z138 */
+		u64	ce_pad_00z140[24];  /* 0x00z140 -- 0x00z1F8 */
+		u64	ce_lsi_lk_lyr_cfg;		/* 0x00z200 */
+		u64	ce_lsi_lk_lyr_status;		/* 0x00z208 */
+		u64	ce_lsi_lk_lyr_int_stat;		/* 0x00z210 */
+		u64	ce_lsi_lk_ly_int_stat_test;	/* 0x00z218 */
+		u64	ce_lsi_lk_ly_int_stat_mask;	/* 0x00z220 */
+		u64	ce_pad_00z228[3];   /* 0x00z228 -- 0x00z238 */
+		u64	ce_lsi_fc_upd_ctl;		/* 0x00z240 */
+		u64	ce_pad_00z248[3];   /* 0x00z248 -- 0x00z258 */
+		u64	ce_lsi_flw_ctl_upd_to_timer;	/* 0x00z260 */
+		u64	ce_lsi_flw_ctl_upd_timer0;	/* 0x00z268 */
+		u64	ce_lsi_flw_ctl_upd_timer1;	/* 0x00z270 */
+		u64	ce_pad_00z278[49];  /* 0x00z278 -- 0x00z3F8 */
+		u64	ce_lsi_freq_nak_lat_thrsh;	/* 0x00z400 */
+		u64	ce_lsi_ack_nak_lat_tmr;		/* 0x00z408 */
+		u64	ce_lsi_rply_tmr_thr;		/* 0x00z410 */
+		u64	ce_lsi_rply_tmr;		/* 0x00z418 */
+		u64	ce_lsi_rply_num_stat;		/* 0x00z420 */
+		u64	ce_lsi_rty_buf_max_addr;	/* 0x00z428 */
+		u64	ce_lsi_rty_fifo_ptr;		/* 0x00z430 */
+		u64	ce_lsi_rty_fifo_rd_wr_ptr;	/* 0x00z438 */
+		u64	ce_lsi_rty_fifo_cred;		/* 0x00z440 */
+		u64	ce_lsi_seq_cnt;			/* 0x00z448 */
+		u64	ce_lsi_ack_sent_seq_num;	/* 0x00z450 */
+		u64	ce_lsi_seq_cnt_fifo_max_addr;	/* 0x00z458 */
+		u64	ce_lsi_seq_cnt_fifo_ptr;	/* 0x00z460 */
+		u64	ce_lsi_seq_cnt_rd_wr_ptr;	/* 0x00z468 */
+		u64	ce_lsi_tx_lk_ts_ctl;		/* 0x00z470 */
+		u64	ce_pad_00z478;			/* 0x00z478 */
+		u64	ce_lsi_mem_addr_ctl;		/* 0x00z480 */
+		u64	ce_lsi_mem_d_ld0;		/* 0x00z488 */
+		u64	ce_lsi_mem_d_ld1;		/* 0x00z490 */
+		u64	ce_lsi_mem_d_ld2;		/* 0x00z498 */
+		u64	ce_lsi_mem_d_ld3;		/* 0x00z4A0 */
+		u64	ce_lsi_mem_d_ld4;		/* 0x00z4A8 */
+		u64	ce_pad_00z4B0[2];   /* 0x00z4B0 -- 0x00z4B8 */
+		u64	ce_lsi_rty_d_cnt;		/* 0x00z4C0 */
+		u64	ce_lsi_seq_buf_cnt;		/* 0x00z4C8 */
+		u64	ce_lsi_seq_buf_bt_d;		/* 0x00z4D0 */
+		u64	ce_pad_00z4D8;			/* 0x00z4D8 */
+		u64	ce_lsi_ack_lat_thr;		/* 0x00z4E0 */
+		u64	ce_pad_00z4E8[3];   /* 0x00z4E8 -- 0x00z4F8 */
+		u64	ce_lsi_nxt_rcv_seq_1_cntr;	/* 0x00z500 */
+		u64	ce_lsi_unsp_dllp_rcvd;		/* 0x00z508 */
+		u64	ce_lsi_rcv_lk_ts_ctl;		/* 0x00z510 */
+		u64	ce_pad_00z518[29];  /* 0x00z518 -- 0x00z5F8 */
+		u64	ce_lsi_phy_lyr_cfg;		/* 0x00z600 */
+		u64	ce_pad_00z608;			/* 0x00z608 */
+		u64	ce_lsi_phy_lyr_int_stat;	/* 0x00z610 */
+		u64	ce_lsi_phy_lyr_int_stat_test;	/* 0x00z618 */
+		u64	ce_lsi_phy_lyr_int_mask;	/* 0x00z620 */
+		u64	ce_pad_00z628[11];  /* 0x00z628 -- 0x00z678 */
+		u64	ce_lsi_rcv_phy_cfg;		/* 0x00z680 */
+		u64	ce_lsi_rcv_phy_stat1;		/* 0x00z688 */
+		u64	ce_lsi_rcv_phy_stat2;		/* 0x00z690 */
+		u64	ce_lsi_rcv_phy_stat3;		/* 0x00z698 */
+		u64	ce_lsi_rcv_phy_int_stat;	/* 0x00z6A0 */
+		u64	ce_lsi_rcv_phy_int_stat_test;	/* 0x00z6A8 */
+		u64	ce_lsi_rcv_phy_int_mask;	/* 0x00z6B0 */
+		u64	ce_pad_00z6B8[9];   /* 0x00z6B8 -- 0x00z6F8 */
+		u64	ce_lsi_tx_phy_cfg;		/* 0x00z700 */
+		u64	ce_lsi_tx_phy_stat;		/* 0x00z708 */
+		u64	ce_lsi_tx_phy_int_stat;		/* 0x00z710 */
+		u64	ce_lsi_tx_phy_int_stat_test;	/* 0x00z718 */
+		u64	ce_lsi_tx_phy_int_mask;		/* 0x00z720 */
+		u64	ce_lsi_tx_phy_stat2;		/* 0x00z728 */
+		u64	ce_pad_00z730[10];  /* 0x00z730 -- 0x00z77F */
+		u64	ce_lsi_ltssm_cfg1;		/* 0x00z780 */
+		u64	ce_lsi_ltssm_cfg2;		/* 0x00z788 */
+		u64	ce_lsi_ltssm_cfg3;		/* 0x00z790 */
+		u64	ce_lsi_ltssm_cfg4;		/* 0x00z798 */
+		u64	ce_lsi_ltssm_cfg5;		/* 0x00z7A0 */
+		u64	ce_lsi_ltssm_stat1;		/* 0x00z7A8 */
+		u64	ce_lsi_ltssm_stat2;		/* 0x00z7B0 */
+		u64	ce_lsi_ltssm_int_stat;		/* 0x00z7B8 */
+		u64	ce_lsi_ltssm_int_stat_test;	/* 0x00z7C0 */
+		u64	ce_lsi_ltssm_int_mask;		/* 0x00z7C8 */
+		u64	ce_lsi_ltssm_stat_wr_en;	/* 0x00z7D0 */
+		u64	ce_pad_00z7D8[5];   /* 0x00z7D8 -- 0x00z7F8 */
+		u64	ce_lsi_gb_cfg1;			/* 0x00z800 */
+		u64	ce_lsi_gb_cfg2;			/* 0x00z808 */
+		u64	ce_lsi_gb_cfg3;			/* 0x00z810 */
+		u64	ce_lsi_gb_cfg4;			/* 0x00z818 */
+		u64	ce_lsi_gb_stat;			/* 0x00z820 */
+		u64	ce_lsi_gb_int_stat;		/* 0x00z828 */
+		u64	ce_lsi_gb_int_stat_test;	/* 0x00z830 */
+		u64	ce_lsi_gb_int_mask;		/* 0x00z838 */
+		u64	ce_lsi_gb_pwr_dn1;		/* 0x00z840 */
+		u64	ce_lsi_gb_pwr_dn2;		/* 0x00z848 */
+		u64	ce_pad_00z850[246]; /* 0x00z850 -- 0x00zFF8 */
+	} ce_lsi[2];
+
+	u64	ce_pad_004000[10];	    /* 0x004000 -- 0x004048 */
+
+	/*
+	 * CRM: Coretalk Receive Module Registers
+	 */
+	u64	ce_crm_debug_mux;			/* 0x004050 */
+	u64	ce_pad_004058;				/* 0x004058 */
+	u64	ce_crm_ssp_err_cmd_wrd;			/* 0x004060 */
+	u64	ce_crm_ssp_err_addr;			/* 0x004068 */
+	u64	ce_crm_ssp_err_syn;			/* 0x004070 */
+
+	u64	ce_pad_004078[499];	    /* 0x004078 -- 0x005008 */
+
+	/*
+         * CXM: Coretalk Xmit Module Registers
+         */
+	u64	ce_cxm_dyn_credit_status;		/* 0x005010 */
+	u64	ce_cxm_last_credit_status;		/* 0x005018 */
+	u64	ce_cxm_credit_limit;			/* 0x005020 */
+	u64	ce_cxm_force_credit;			/* 0x005028 */
+	u64	ce_cxm_disable_bypass;			/* 0x005030 */
+	u64	ce_pad_005038[3];	    /* 0x005038 -- 0x005048 */
+	u64	ce_cxm_debug_mux;			/* 0x005050 */
+
+        u64        ce_pad_005058[501];         /* 0x005058 -- 0x005FF8 */
+
+	/*
+	 * DTL: Downstream Transaction Layer Regs (Link#1 and Link#2)
+	 * DTL: Link#1 MMRs at start at 0x006000, Link#2 MMRs at 0x008000
+	 * DTL: the comment offsets at far right: let 'y' = {6 or 8}
+	 *
+	 * UTL: Downstream Transaction Layer Regs (Link#1 and Link#2)
+	 * UTL: Link#1 MMRs at start at 0x007000, Link#2 MMRs at 0x009000
+	 * UTL: the comment offsets at far right: let 'z' = {7 or 9}
+	 */
+	#define ce_dtl(link_num)	ce_dtl_utl[link_num-1]
+	#define ce_utl(link_num)	ce_dtl_utl[link_num-1]
+	struct ce_dtl_utl_reg {
+		/* DTL */
+		u64	ce_dtl_dtdr_credit_limit;	/* 0x00y000 */
+		u64	ce_dtl_dtdr_credit_force;	/* 0x00y008 */
+		u64	ce_dtl_dyn_credit_status;	/* 0x00y010 */
+		u64	ce_dtl_dtl_last_credit_stat;	/* 0x00y018 */
+		u64	ce_dtl_dtl_ctrl;		/* 0x00y020 */
+		u64	ce_pad_00y028[5];   /* 0x00y028 -- 0x00y048 */
+		u64	ce_dtl_debug_sel;		/* 0x00y050 */
+		u64	ce_pad_00y058[501]; /* 0x00y058 -- 0x00yFF8 */
+
+		/* UTL */
+		u64	ce_utl_utl_ctrl;		/* 0x00z000 */
+		u64	ce_utl_debug_sel;		/* 0x00z008 */
+		u64	ce_pad_00z010[510]; /* 0x00z010 -- 0x00zFF8 */
+	} ce_dtl_utl[2];
+
+	u64	ce_pad_00A000[514];	    /* 0x00A000 -- 0x00B008 */
+
+	/*
+	 * URE: Upstream Request Engine
+         */
+	u64	ce_ure_dyn_credit_status;		/* 0x00B010 */
+	u64	ce_ure_last_credit_status;		/* 0x00B018 */
+	u64	ce_ure_credit_limit;			/* 0x00B020 */
+	u64	ce_pad_00B028;				/* 0x00B028 */
+	u64	ce_ure_control;				/* 0x00B030 */
+	u64	ce_ure_status;				/* 0x00B038 */
+	u64	ce_pad_00B040[2];	    /* 0x00B040 -- 0x00B048 */
+	u64	ce_ure_debug_sel;			/* 0x00B050 */
+	u64	ce_ure_pcie_debug_sel;			/* 0x00B058 */
+	u64	ce_ure_ssp_err_cmd_wrd;			/* 0x00B060 */
+	u64	ce_ure_ssp_err_addr;			/* 0x00B068 */
+	u64	ce_ure_page_map;			/* 0x00B070 */
+	u64	ce_ure_dir_map[TIOCE_NUM_PORTS];	/* 0x00B078 */
+	u64	ce_ure_pipe_sel1;			/* 0x00B088 */
+	u64	ce_ure_pipe_mask1;			/* 0x00B090 */
+	u64	ce_ure_pipe_sel2;			/* 0x00B098 */
+	u64	ce_ure_pipe_mask2;			/* 0x00B0A0 */
+	u64	ce_ure_pcie1_credits_sent;		/* 0x00B0A8 */
+	u64	ce_ure_pcie1_credits_used;		/* 0x00B0B0 */
+	u64	ce_ure_pcie1_credit_limit;		/* 0x00B0B8 */
+	u64	ce_ure_pcie2_credits_sent;		/* 0x00B0C0 */
+	u64	ce_ure_pcie2_credits_used;		/* 0x00B0C8 */
+	u64	ce_ure_pcie2_credit_limit;		/* 0x00B0D0 */
+	u64	ce_ure_pcie_force_credit;		/* 0x00B0D8 */
+	u64	ce_ure_rd_tnum_val;			/* 0x00B0E0 */
+	u64	ce_ure_rd_tnum_rsp_rcvd;		/* 0x00B0E8 */
+	u64	ce_ure_rd_tnum_esent_timer;		/* 0x00B0F0 */
+	u64	ce_ure_rd_tnum_error;			/* 0x00B0F8 */
+	u64	ce_ure_rd_tnum_first_cl;		/* 0x00B100 */
+	u64	ce_ure_rd_tnum_link_buf;		/* 0x00B108 */
+	u64	ce_ure_wr_tnum_val;			/* 0x00B110 */
+	u64	ce_ure_sram_err_addr0;			/* 0x00B118 */
+	u64	ce_ure_sram_err_addr1;			/* 0x00B120 */
+	u64	ce_ure_sram_err_addr2;			/* 0x00B128 */
+	u64	ce_ure_sram_rd_addr0;			/* 0x00B130 */
+	u64	ce_ure_sram_rd_addr1;			/* 0x00B138 */
+	u64	ce_ure_sram_rd_addr2;			/* 0x00B140 */
+	u64	ce_ure_sram_wr_addr0;			/* 0x00B148 */
+	u64	ce_ure_sram_wr_addr1;			/* 0x00B150 */
+	u64	ce_ure_sram_wr_addr2;			/* 0x00B158 */
+	u64	ce_ure_buf_flush10;			/* 0x00B160 */
+	u64	ce_ure_buf_flush11;			/* 0x00B168 */
+	u64	ce_ure_buf_flush12;			/* 0x00B170 */
+	u64	ce_ure_buf_flush13;			/* 0x00B178 */
+	u64	ce_ure_buf_flush20;			/* 0x00B180 */
+	u64	ce_ure_buf_flush21;			/* 0x00B188 */
+	u64	ce_ure_buf_flush22;			/* 0x00B190 */
+	u64	ce_ure_buf_flush23;			/* 0x00B198 */
+	u64	ce_ure_pcie_control1;			/* 0x00B1A0 */
+	u64	ce_ure_pcie_control2;			/* 0x00B1A8 */
+
+	u64	ce_pad_00B1B0[458];	    /* 0x00B1B0 -- 0x00BFF8 */
+
+	/* Upstream Data Buffer, Port1 */
+	struct ce_ure_maint_ups_dat1_data {
+		u64	data63_0[512];	    /* 0x00C000 -- 0x00CFF8 */
+		u64	data127_64[512];    /* 0x00D000 -- 0x00DFF8 */
+		u64	parity[512];	    /* 0x00E000 -- 0x00EFF8 */
+	} ce_ure_maint_ups_dat1;
+
+	/* Upstream Header Buffer, Port1 */
+	struct ce_ure_maint_ups_hdr1_data {
+		u64	data63_0[512];	    /* 0x00F000 -- 0x00FFF8 */
+		u64	data127_64[512];    /* 0x010000 -- 0x010FF8 */
+		u64	parity[512];	    /* 0x011000 -- 0x011FF8 */
+	} ce_ure_maint_ups_hdr1;
+
+	/* Upstream Data Buffer, Port2 */
+	struct ce_ure_maint_ups_dat2_data {
+		u64	data63_0[512];	    /* 0x012000 -- 0x012FF8 */
+		u64	data127_64[512];    /* 0x013000 -- 0x013FF8 */
+		u64	parity[512];	    /* 0x014000 -- 0x014FF8 */
+	} ce_ure_maint_ups_dat2;
+
+	/* Upstream Header Buffer, Port2 */
+	struct ce_ure_maint_ups_hdr2_data {
+		u64	data63_0[512];	    /* 0x015000 -- 0x015FF8 */
+		u64	data127_64[512];    /* 0x016000 -- 0x016FF8 */
+		u64	parity[512];	    /* 0x017000 -- 0x017FF8 */
+	} ce_ure_maint_ups_hdr2;
+
+	/* Downstream Data Buffer */
+	struct ce_ure_maint_dns_dat_data {
+		u64	data63_0[512];	    /* 0x018000 -- 0x018FF8 */
+		u64	data127_64[512];    /* 0x019000 -- 0x019FF8 */
+		u64	parity[512];	    /* 0x01A000 -- 0x01AFF8 */
+	} ce_ure_maint_dns_dat;
+
+	/* Downstream Header Buffer */
+	struct	ce_ure_maint_dns_hdr_data {
+		u64	data31_0[64];	    /* 0x01B000 -- 0x01B1F8 */
+		u64	data95_32[64];	    /* 0x01B200 -- 0x01B3F8 */
+		u64	parity[64];	    /* 0x01B400 -- 0x01B5F8 */
+	} ce_ure_maint_dns_hdr;
+
+	/* RCI Buffer Data */
+	struct	ce_ure_maint_rci_data {
+		u64	data41_0[64];	    /* 0x01B600 -- 0x01B7F8 */
+		u64	data69_42[64];	    /* 0x01B800 -- 0x01B9F8 */
+	} ce_ure_maint_rci;
+
+	/* Response Queue */
+	u64	ce_ure_maint_rspq[64];	    /* 0x01BA00 -- 0x01BBF8 */
+
+	u64	ce_pad_01C000[4224];	    /* 0x01BC00 -- 0x023FF8 */
+
+	/* Admin Build-a-Packet Buffer */
+	struct	ce_adm_maint_bap_buf_data {
+		u64	data63_0[258];	    /* 0x024000 -- 0x024808 */
+		u64	data127_64[258];    /* 0x024810 -- 0x025018 */
+		u64	parity[258];	    /* 0x025020 -- 0x025828 */
+	} ce_adm_maint_bap_buf;
+
+	u64	ce_pad_025830[5370];	    /* 0x025830 -- 0x02FFF8 */
+
+	/* URE: 40bit PMU ATE Buffer */		    /* 0x030000 -- 0x037FF8 */
+	u64	ce_ure_ate40[TIOCE_NUM_M40_ATES];
+
+	/* URE: 32/40bit PMU ATE Buffer */	    /* 0x038000 -- 0x03BFF8 */
+	u64	ce_ure_ate3240[TIOCE_NUM_M3240_ATES];
+
+	u64	ce_pad_03C000[2050];	    /* 0x03C000 -- 0x040008 */
+
+	/*
+	 * DRE: Down Stream Request Engine
+         */
+	u64	ce_dre_dyn_credit_status1;		/* 0x040010 */
+	u64	ce_dre_dyn_credit_status2;		/* 0x040018 */
+	u64	ce_dre_last_credit_status1;		/* 0x040020 */
+	u64	ce_dre_last_credit_status2;		/* 0x040028 */
+	u64	ce_dre_credit_limit1;			/* 0x040030 */
+	u64	ce_dre_credit_limit2;			/* 0x040038 */
+	u64	ce_dre_force_credit1;			/* 0x040040 */
+	u64	ce_dre_force_credit2;			/* 0x040048 */
+	u64	ce_dre_debug_mux1;			/* 0x040050 */
+	u64	ce_dre_debug_mux2;			/* 0x040058 */
+	u64	ce_dre_ssp_err_cmd_wrd;			/* 0x040060 */
+	u64	ce_dre_ssp_err_addr;			/* 0x040068 */
+	u64	ce_dre_comp_err_cmd_wrd;		/* 0x040070 */
+	u64	ce_dre_comp_err_addr;			/* 0x040078 */
+	u64	ce_dre_req_status;			/* 0x040080 */
+	u64	ce_dre_config1;				/* 0x040088 */
+	u64	ce_dre_config2;				/* 0x040090 */
+	u64	ce_dre_config_req_status;		/* 0x040098 */
+	u64	ce_pad_0400A0[12];	    /* 0x0400A0 -- 0x0400F8 */
+	u64	ce_dre_dyn_fifo;			/* 0x040100 */
+	u64	ce_pad_040108[3];	    /* 0x040108 -- 0x040118 */
+	u64	ce_dre_last_fifo;			/* 0x040120 */
+
+	u64	ce_pad_040128[27];	    /* 0x040128 -- 0x0401F8 */
+
+	/* DRE Downstream Head Queue */
+	struct	ce_dre_maint_ds_head_queue {
+		u64	data63_0[32];	    /* 0x040200 -- 0x0402F8 */
+		u64	data127_64[32];	    /* 0x040300 -- 0x0403F8 */
+		u64	parity[32];	    /* 0x040400 -- 0x0404F8 */
+	} ce_dre_maint_ds_head_q;
+
+	u64	ce_pad_040500[352];	    /* 0x040500 -- 0x040FF8 */
+
+	/* DRE Downstream Data Queue */
+	struct	ce_dre_maint_ds_data_queue {
+		u64	data63_0[256];	    /* 0x041000 -- 0x0417F8 */
+		u64	ce_pad_041800[256]; /* 0x041800 -- 0x041FF8 */
+		u64	data127_64[256];    /* 0x042000 -- 0x0427F8 */
+		u64	ce_pad_042800[256]; /* 0x042800 -- 0x042FF8 */
+		u64	parity[256];	    /* 0x043000 -- 0x0437F8 */
+		u64	ce_pad_043800[256]; /* 0x043800 -- 0x043FF8 */
+	} ce_dre_maint_ds_data_q;
+
+	/* DRE URE Upstream Response Queue */
+	struct	ce_dre_maint_ure_us_rsp_queue {
+		u64	data63_0[8];	    /* 0x044000 -- 0x044038 */
+		u64	ce_pad_044040[24];  /* 0x044040 -- 0x0440F8 */
+		u64	data127_64[8];      /* 0x044100 -- 0x044138 */
+		u64	ce_pad_044140[24];  /* 0x044140 -- 0x0441F8 */
+		u64	parity[8];	    /* 0x044200 -- 0x044238 */
+		u64	ce_pad_044240[24];  /* 0x044240 -- 0x0442F8 */
+	} ce_dre_maint_ure_us_rsp_q;
+
+	u64 	ce_dre_maint_us_wrt_rsp[32];/* 0x044300 -- 0x0443F8 */
+
+	u64	ce_end_of_struct;			/* 0x044400 */
+} tioce_t;
+
+/* ce_lsiX_gb_cfg1 register bit masks & shifts */
+#define CE_LSI_GB_CFG1_RXL0S_THS_SHFT	0
+#define CE_LSI_GB_CFG1_RXL0S_THS_MASK	(0xffULL << 0)
+#define CE_LSI_GB_CFG1_RXL0S_SMP_SHFT	8
+#define CE_LSI_GB_CFG1_RXL0S_SMP_MASK	(0xfULL << 8);
+#define CE_LSI_GB_CFG1_RXL0S_ADJ_SHFT	12
+#define CE_LSI_GB_CFG1_RXL0S_ADJ_MASK	(0x7ULL << 12)
+#define CE_LSI_GB_CFG1_RXL0S_FLT_SHFT	15
+#define CE_LSI_GB_CFG1_RXL0S_FLT_MASK	(0x1ULL << 15)
+#define CE_LSI_GB_CFG1_LPBK_SEL_SHFT	16
+#define CE_LSI_GB_CFG1_LPBK_SEL_MASK	(0x3ULL << 16)
+#define CE_LSI_GB_CFG1_LPBK_EN_SHFT	18
+#define CE_LSI_GB_CFG1_LPBK_EN_MASK	(0x1ULL << 18)
+#define CE_LSI_GB_CFG1_RVRS_LB_SHFT	19
+#define CE_LSI_GB_CFG1_RVRS_LB_MASK	(0x1ULL << 19)
+#define CE_LSI_GB_CFG1_RVRS_CLK_SHFT	20
+#define CE_LSI_GB_CFG1_RVRS_CLK_MASK	(0x3ULL << 20)
+#define CE_LSI_GB_CFG1_SLF_TS_SHFT	24
+#define CE_LSI_GB_CFG1_SLF_TS_MASK	(0xfULL << 24)
+
+/* ce_adm_int_mask/ce_adm_int_status register bit defines */
+#define CE_ADM_INT_CE_ERROR_SHFT		0
+#define CE_ADM_INT_LSI1_IP_ERROR_SHFT		1
+#define CE_ADM_INT_LSI2_IP_ERROR_SHFT		2
+#define CE_ADM_INT_PCIE_ERROR_SHFT		3
+#define CE_ADM_INT_PORT1_HOTPLUG_EVENT_SHFT	4
+#define CE_ADM_INT_PORT2_HOTPLUG_EVENT_SHFT	5
+#define CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT	6
+#define CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT	7
+#define CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT	8
+#define CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT	9
+#define CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT	10
+#define CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT	11
+#define CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT	12
+#define CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT	13
+#define CE_ADM_INT_PCIE_MSG_SHFT		14 /*see int_dest_14*/
+#define CE_ADM_INT_PCIE_MSG_SLOT_0_SHFT		14
+#define CE_ADM_INT_PCIE_MSG_SLOT_1_SHFT		15
+#define CE_ADM_INT_PCIE_MSG_SLOT_2_SHFT		16
+#define CE_ADM_INT_PCIE_MSG_SLOT_3_SHFT		17
+#define CE_ADM_INT_PORT1_PM_PME_MSG_SHFT	22
+#define CE_ADM_INT_PORT2_PM_PME_MSG_SHFT	23
+
+/* ce_adm_force_int register bit defines */
+#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT	0
+#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT	1
+#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT	2
+#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT	3
+#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT	4
+#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT	5
+#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT	6
+#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT	7
+#define CE_ADM_FORCE_INT_ALWAYS_SHFT		8
+
+/* ce_adm_int_dest register bit masks & shifts */
+#define INTR_VECTOR_SHFT			56
+
+/* ce_adm_error_mask and ce_adm_error_summary register bit masks */
+#define CE_ADM_ERR_CRM_SSP_REQ_INVALID			(0x1ULL <<  0)
+#define CE_ADM_ERR_SSP_REQ_HEADER			(0x1ULL <<  1)
+#define CE_ADM_ERR_SSP_RSP_HEADER			(0x1ULL <<  2)
+#define CE_ADM_ERR_SSP_PROTOCOL_ERROR			(0x1ULL <<  3)
+#define CE_ADM_ERR_SSP_SBE				(0x1ULL <<  4)
+#define CE_ADM_ERR_SSP_MBE				(0x1ULL <<  5)
+#define CE_ADM_ERR_CXM_CREDIT_OFLOW			(0x1ULL <<  6)
+#define CE_ADM_ERR_DRE_SSP_REQ_INVAL			(0x1ULL <<  7)
+#define CE_ADM_ERR_SSP_REQ_LONG				(0x1ULL <<  8)
+#define CE_ADM_ERR_SSP_REQ_OFLOW			(0x1ULL <<  9)
+#define CE_ADM_ERR_SSP_REQ_SHORT			(0x1ULL << 10)
+#define CE_ADM_ERR_SSP_REQ_SIDEBAND			(0x1ULL << 11)
+#define CE_ADM_ERR_SSP_REQ_ADDR_ERR			(0x1ULL << 12)
+#define CE_ADM_ERR_SSP_REQ_BAD_BE			(0x1ULL << 13)
+#define CE_ADM_ERR_PCIE_COMPL_TIMEOUT			(0x1ULL << 14)
+#define CE_ADM_ERR_PCIE_UNEXP_COMPL			(0x1ULL << 15)
+#define CE_ADM_ERR_PCIE_ERR_COMPL			(0x1ULL << 16)
+#define CE_ADM_ERR_DRE_CREDIT_OFLOW			(0x1ULL << 17)
+#define CE_ADM_ERR_DRE_SRAM_PE				(0x1ULL << 18)
+#define CE_ADM_ERR_SSP_RSP_INVALID			(0x1ULL << 19)
+#define CE_ADM_ERR_SSP_RSP_LONG				(0x1ULL << 20)
+#define CE_ADM_ERR_SSP_RSP_SHORT			(0x1ULL << 21)
+#define CE_ADM_ERR_SSP_RSP_SIDEBAND			(0x1ULL << 22)
+#define CE_ADM_ERR_URE_SSP_RSP_UNEXP			(0x1ULL << 23)
+#define CE_ADM_ERR_URE_SSP_WR_REQ_TIMEOUT		(0x1ULL << 24)
+#define CE_ADM_ERR_URE_SSP_RD_REQ_TIMEOUT		(0x1ULL << 25)
+#define CE_ADM_ERR_URE_ATE3240_PAGE_FAULT		(0x1ULL << 26)
+#define CE_ADM_ERR_URE_ATE40_PAGE_FAULT			(0x1ULL << 27)
+#define CE_ADM_ERR_URE_CREDIT_OFLOW			(0x1ULL << 28)
+#define CE_ADM_ERR_URE_SRAM_PE				(0x1ULL << 29)
+#define CE_ADM_ERR_ADM_SSP_RSP_UNEXP			(0x1ULL << 30)
+#define CE_ADM_ERR_ADM_SSP_REQ_TIMEOUT			(0x1ULL << 31)
+#define CE_ADM_ERR_MMR_ACCESS_ERROR			(0x1ULL << 32)
+#define CE_ADM_ERR_MMR_ADDR_ERROR			(0x1ULL << 33)
+#define CE_ADM_ERR_ADM_CREDIT_OFLOW			(0x1ULL << 34)
+#define CE_ADM_ERR_ADM_SRAM_PE				(0x1ULL << 35)
+#define CE_ADM_ERR_DTL1_MIN_PDATA_CREDIT_ERR		(0x1ULL << 36)
+#define CE_ADM_ERR_DTL1_INF_COMPL_CRED_UPDT_ERR		(0x1ULL << 37)
+#define CE_ADM_ERR_DTL1_INF_POSTED_CRED_UPDT_ERR	(0x1ULL << 38)
+#define CE_ADM_ERR_DTL1_INF_NPOSTED_CRED_UPDT_ERR	(0x1ULL << 39)
+#define CE_ADM_ERR_DTL1_COMP_HD_CRED_MAX_ERR		(0x1ULL << 40)
+#define CE_ADM_ERR_DTL1_COMP_D_CRED_MAX_ERR		(0x1ULL << 41)
+#define CE_ADM_ERR_DTL1_NPOSTED_HD_CRED_MAX_ERR		(0x1ULL << 42)
+#define CE_ADM_ERR_DTL1_NPOSTED_D_CRED_MAX_ERR		(0x1ULL << 43)
+#define CE_ADM_ERR_DTL1_POSTED_HD_CRED_MAX_ERR		(0x1ULL << 44)
+#define CE_ADM_ERR_DTL1_POSTED_D_CRED_MAX_ERR		(0x1ULL << 45)
+#define CE_ADM_ERR_DTL2_MIN_PDATA_CREDIT_ERR		(0x1ULL << 46)
+#define CE_ADM_ERR_DTL2_INF_COMPL_CRED_UPDT_ERR		(0x1ULL << 47)
+#define CE_ADM_ERR_DTL2_INF_POSTED_CRED_UPDT_ERR	(0x1ULL << 48)
+#define CE_ADM_ERR_DTL2_INF_NPOSTED_CRED_UPDT_ERR	(0x1ULL << 49)
+#define CE_ADM_ERR_DTL2_COMP_HD_CRED_MAX_ERR		(0x1ULL << 50)
+#define CE_ADM_ERR_DTL2_COMP_D_CRED_MAX_ERR		(0x1ULL << 51)
+#define CE_ADM_ERR_DTL2_NPOSTED_HD_CRED_MAX_ERR		(0x1ULL << 52)
+#define CE_ADM_ERR_DTL2_NPOSTED_D_CRED_MAX_ERR		(0x1ULL << 53)
+#define CE_ADM_ERR_DTL2_POSTED_HD_CRED_MAX_ERR		(0x1ULL << 54)
+#define CE_ADM_ERR_DTL2_POSTED_D_CRED_MAX_ERR		(0x1ULL << 55)
+#define CE_ADM_ERR_PORT1_PCIE_COR_ERR			(0x1ULL << 56)
+#define CE_ADM_ERR_PORT1_PCIE_NFAT_ERR			(0x1ULL << 57)
+#define CE_ADM_ERR_PORT1_PCIE_FAT_ERR			(0x1ULL << 58)
+#define CE_ADM_ERR_PORT2_PCIE_COR_ERR			(0x1ULL << 59)
+#define CE_ADM_ERR_PORT2_PCIE_NFAT_ERR			(0x1ULL << 60)
+#define CE_ADM_ERR_PORT2_PCIE_FAT_ERR			(0x1ULL << 61)
+
+/* ce_adm_ure_ups_buf_barrier_flush register bit masks and shifts */
+#define FLUSH_SEL_PORT1_PIPE0_SHFT	0
+#define FLUSH_SEL_PORT1_PIPE1_SHFT	4
+#define FLUSH_SEL_PORT1_PIPE2_SHFT	8
+#define FLUSH_SEL_PORT1_PIPE3_SHFT	12
+#define FLUSH_SEL_PORT2_PIPE0_SHFT	16
+#define FLUSH_SEL_PORT2_PIPE1_SHFT	20
+#define FLUSH_SEL_PORT2_PIPE2_SHFT	24
+#define FLUSH_SEL_PORT2_PIPE3_SHFT	28
+
+/* ce_dre_config1 register bit masks and shifts */
+#define CE_DRE_RO_ENABLE		(0x1ULL << 0)
+#define CE_DRE_DYN_RO_ENABLE		(0x1ULL << 1)
+#define CE_DRE_SUP_CONFIG_COMP_ERROR	(0x1ULL << 2)
+#define CE_DRE_SUP_IO_COMP_ERROR	(0x1ULL << 3)
+#define CE_DRE_ADDR_MODE_SHFT		4
+
+/* ce_dre_config_req_status register bit masks */
+#define CE_DRE_LAST_CONFIG_COMPLETION	(0x7ULL << 0)
+#define CE_DRE_DOWNSTREAM_CONFIG_ERROR	(0x1ULL << 3)
+#define CE_DRE_CONFIG_COMPLETION_VALID	(0x1ULL << 4)
+#define CE_DRE_CONFIG_REQUEST_ACTIVE	(0x1ULL << 5)
+
+/* ce_ure_control register bit masks & shifts */
+#define CE_URE_RD_MRG_ENABLE		(0x1ULL << 0)
+#define CE_URE_WRT_MRG_ENABLE1		(0x1ULL << 4)
+#define CE_URE_WRT_MRG_ENABLE2		(0x1ULL << 5)
+#define CE_URE_WRT_MRG_TIMER_SHFT	12
+#define CE_URE_WRT_MRG_TIMER_MASK	(0x7FFULL << CE_URE_WRT_MRG_TIMER_SHFT)
+#define CE_URE_WRT_MRG_TIMER(x)		(((u64)(x) << \
+					  CE_URE_WRT_MRG_TIMER_SHFT) & \
+					 CE_URE_WRT_MRG_TIMER_MASK)
+#define CE_URE_RSPQ_BYPASS_DISABLE	(0x1ULL << 24)
+#define CE_URE_UPS_DAT1_PAR_DISABLE	(0x1ULL << 32)
+#define CE_URE_UPS_HDR1_PAR_DISABLE	(0x1ULL << 33)
+#define CE_URE_UPS_DAT2_PAR_DISABLE	(0x1ULL << 34)
+#define CE_URE_UPS_HDR2_PAR_DISABLE	(0x1ULL << 35)
+#define CE_URE_ATE_PAR_DISABLE		(0x1ULL << 36)
+#define CE_URE_RCI_PAR_DISABLE		(0x1ULL << 37)
+#define CE_URE_RSPQ_PAR_DISABLE		(0x1ULL << 38)
+#define CE_URE_DNS_DAT_PAR_DISABLE	(0x1ULL << 39)
+#define CE_URE_DNS_HDR_PAR_DISABLE	(0x1ULL << 40)
+#define CE_URE_MALFORM_DISABLE		(0x1ULL << 44)
+#define CE_URE_UNSUP_DISABLE		(0x1ULL << 45)
+
+/* ce_ure_page_map register bit masks & shifts */
+#define CE_URE_ATE3240_ENABLE		(0x1ULL << 0)
+#define CE_URE_ATE40_ENABLE 		(0x1ULL << 1)
+#define CE_URE_PAGESIZE_SHFT		4
+#define CE_URE_PAGESIZE_MASK		(0x7ULL << CE_URE_PAGESIZE_SHFT)
+#define CE_URE_4K_PAGESIZE		(0x0ULL << CE_URE_PAGESIZE_SHFT)
+#define CE_URE_16K_PAGESIZE		(0x1ULL << CE_URE_PAGESIZE_SHFT)
+#define CE_URE_64K_PAGESIZE		(0x2ULL << CE_URE_PAGESIZE_SHFT)
+#define CE_URE_128K_PAGESIZE		(0x3ULL << CE_URE_PAGESIZE_SHFT)
+#define CE_URE_256K_PAGESIZE		(0x4ULL << CE_URE_PAGESIZE_SHFT)
+
+/* ce_ure_pipe_sel register bit masks & shifts */
+#define PKT_TRAFIC_SHRT			16
+#define BUS_SRC_ID_SHFT			8
+#define DEV_SRC_ID_SHFT			3
+#define FNC_SRC_ID_SHFT			0
+#define CE_URE_TC_MASK			(0x07ULL << PKT_TRAFIC_SHRT)
+#define CE_URE_BUS_MASK			(0xFFULL << BUS_SRC_ID_SHFT)
+#define CE_URE_DEV_MASK			(0x1FULL << DEV_SRC_ID_SHFT)
+#define CE_URE_FNC_MASK			(0x07ULL << FNC_SRC_ID_SHFT)
+#define CE_URE_PIPE_BUS(b)		(((u64)(b) << BUS_SRC_ID_SHFT) & \
+					 CE_URE_BUS_MASK)
+#define CE_URE_PIPE_DEV(d)		(((u64)(d) << DEV_SRC_ID_SHFT) & \
+					 CE_URE_DEV_MASK)
+#define CE_URE_PIPE_FNC(f)		(((u64)(f) << FNC_SRC_ID_SHFT) & \
+					 CE_URE_FNC_MASK)
+
+#define CE_URE_SEL1_SHFT		0
+#define CE_URE_SEL2_SHFT		20
+#define CE_URE_SEL3_SHFT		40
+#define CE_URE_SEL1_MASK		(0x7FFFFULL << CE_URE_SEL1_SHFT)
+#define CE_URE_SEL2_MASK		(0x7FFFFULL << CE_URE_SEL2_SHFT)
+#define CE_URE_SEL3_MASK		(0x7FFFFULL << CE_URE_SEL3_SHFT)
+
+
+/* ce_ure_pipe_mask register bit masks & shifts */
+#define CE_URE_MASK1_SHFT		0
+#define CE_URE_MASK2_SHFT		20
+#define CE_URE_MASK3_SHFT		40
+#define CE_URE_MASK1_MASK		(0x7FFFFULL << CE_URE_MASK1_SHFT)
+#define CE_URE_MASK2_MASK		(0x7FFFFULL << CE_URE_MASK2_SHFT)
+#define CE_URE_MASK3_MASK		(0x7FFFFULL << CE_URE_MASK3_SHFT)
+
+
+/* ce_ure_pcie_control1 register bit masks & shifts */
+#define CE_URE_SI			(0x1ULL << 0)
+#define CE_URE_ELAL_SHFT		4
+#define CE_URE_ELAL_MASK		(0x7ULL << CE_URE_ELAL_SHFT)
+#define CE_URE_ELAL_SET(n)		(((u64)(n) << CE_URE_ELAL_SHFT) & \
+					 CE_URE_ELAL_MASK)
+#define CE_URE_ELAL1_SHFT		8
+#define CE_URE_ELAL1_MASK		(0x7ULL << CE_URE_ELAL1_SHFT)
+#define CE_URE_ELAL1_SET(n)		(((u64)(n) << CE_URE_ELAL1_SHFT) & \
+					 CE_URE_ELAL1_MASK)
+#define CE_URE_SCC			(0x1ULL << 12)
+#define CE_URE_PN1_SHFT			16
+#define CE_URE_PN1_MASK			(0xFFULL << CE_URE_PN1_SHFT)
+#define CE_URE_PN2_SHFT			24
+#define CE_URE_PN2_MASK			(0xFFULL << CE_URE_PN2_SHFT)
+#define CE_URE_PN1_SET(n)		(((u64)(n) << CE_URE_PN1_SHFT) & \
+					 CE_URE_PN1_MASK)
+#define CE_URE_PN2_SET(n)		(((u64)(n) << CE_URE_PN2_SHFT) & \
+					 CE_URE_PN2_MASK)
+
+/* ce_ure_pcie_control2 register bit masks & shifts */
+#define CE_URE_ABP			(0x1ULL << 0)
+#define CE_URE_PCP			(0x1ULL << 1)
+#define CE_URE_MSP			(0x1ULL << 2)
+#define CE_URE_AIP			(0x1ULL << 3)
+#define CE_URE_PIP			(0x1ULL << 4)
+#define CE_URE_HPS			(0x1ULL << 5)
+#define CE_URE_HPC			(0x1ULL << 6)
+#define CE_URE_SPLV_SHFT		7
+#define CE_URE_SPLV_MASK		(0xFFULL << CE_URE_SPLV_SHFT)
+#define CE_URE_SPLV_SET(n)		(((u64)(n) << CE_URE_SPLV_SHFT) & \
+					 CE_URE_SPLV_MASK)
+#define CE_URE_SPLS_SHFT		15
+#define CE_URE_SPLS_MASK		(0x3ULL << CE_URE_SPLS_SHFT)
+#define CE_URE_SPLS_SET(n)		(((u64)(n) << CE_URE_SPLS_SHFT) & \
+					 CE_URE_SPLS_MASK)
+#define CE_URE_PSN1_SHFT		19
+#define CE_URE_PSN1_MASK		(0x1FFFULL << CE_URE_PSN1_SHFT)
+#define CE_URE_PSN2_SHFT		32
+#define CE_URE_PSN2_MASK		(0x1FFFULL << CE_URE_PSN2_SHFT)
+#define CE_URE_PSN1_SET(n)		(((u64)(n) << CE_URE_PSN1_SHFT) & \
+					 CE_URE_PSN1_MASK)
+#define CE_URE_PSN2_SET(n)		(((u64)(n) << CE_URE_PSN2_SHFT) & \
+					 CE_URE_PSN2_MASK)
+
+/*
+ * PIO address space ranges for CE
+ */
+
+/* Local CE Registers Space */
+#define CE_PIO_MMR			0x00000000
+#define CE_PIO_MMR_LEN			0x04000000
+
+/* PCI Compatible Config Space */
+#define CE_PIO_CONFIG_SPACE		0x04000000
+#define CE_PIO_CONFIG_SPACE_LEN		0x04000000
+
+/* PCI I/O Space Alias */
+#define CE_PIO_IO_SPACE_ALIAS		0x08000000
+#define CE_PIO_IO_SPACE_ALIAS_LEN	0x08000000
+
+/* PCI Enhanced Config Space */
+#define CE_PIO_E_CONFIG_SPACE		0x10000000
+#define CE_PIO_E_CONFIG_SPACE_LEN	0x10000000
+
+/* PCI I/O Space */
+#define CE_PIO_IO_SPACE			0x100000000
+#define CE_PIO_IO_SPACE_LEN		0x100000000
+
+/* PCI MEM Space */
+#define CE_PIO_MEM_SPACE		0x200000000
+#define CE_PIO_MEM_SPACE_LEN		TIO_HWIN_SIZE
+
+
+/*
+ * CE PCI Enhanced Config Space shifts & masks
+ */
+#define CE_E_CONFIG_BUS_SHFT		20
+#define CE_E_CONFIG_BUS_MASK		(0xFF << CE_E_CONFIG_BUS_SHFT)
+#define CE_E_CONFIG_DEVICE_SHFT		15
+#define CE_E_CONFIG_DEVICE_MASK		(0x1F << CE_E_CONFIG_DEVICE_SHFT)
+#define CE_E_CONFIG_FUNC_SHFT		12
+#define CE_E_CONFIG_FUNC_MASK		(0x7  << CE_E_CONFIG_FUNC_SHFT)
+
+#endif /* __ASM_IA64_SN_TIOCE_H__ */
diff --git a/arch/ia64/include/asm/sn/tioce_provider.h b/arch/ia64/include/asm/sn/tioce_provider.h
new file mode 100644
index 000000000000..32c32f30b099
--- /dev/null
+++ b/arch/ia64/include/asm/sn/tioce_provider.h
@@ -0,0 +1,63 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_CE_PROVIDER_H
+#define _ASM_IA64_SN_CE_PROVIDER_H
+
+#include <asm/sn/pcibus_provider_defs.h>
+#include <asm/sn/tioce.h>
+
+/*
+ * Common TIOCE structure shared between the prom and kernel
+ *
+ * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES TO THE
+ * PROM VERSION.
+ */
+struct tioce_common {
+	struct pcibus_bussoft	ce_pcibus;	/* common pciio header */
+
+	u32		ce_rev;
+	u64		ce_kernel_private;
+	u64		ce_prom_private;
+};
+
+struct tioce_kernel {
+	struct tioce_common	*ce_common;
+	spinlock_t		ce_lock;
+	struct list_head	ce_dmamap_list;
+
+	u64		ce_ate40_shadow[TIOCE_NUM_M40_ATES];
+	u64		ce_ate3240_shadow[TIOCE_NUM_M3240_ATES];
+	u32		ce_ate3240_pagesize;
+
+	u8			ce_port1_secondary;
+
+	/* per-port resources */
+	struct {
+		int 		dirmap_refcnt;
+		u64	dirmap_shadow;
+	} ce_port[TIOCE_NUM_PORTS];
+};
+
+struct tioce_dmamap {
+	struct list_head	ce_dmamap_list;	/* headed by tioce_kernel */
+	u32		refcnt;
+
+	u64		nbytes;		/* # bytes mapped */
+
+	u64		ct_start;	/* coretalk start address */
+	u64		pci_start;	/* bus start address */
+
+	u64		__iomem *ate_hw;/* hw ptr of first ate in map */
+	u64		*ate_shadow;	/* shadow ptr of firat ate */
+	u16		ate_count;	/* # ate's in the map */
+};
+
+extern int tioce_init_provider(void);
+
+#endif  /* __ASM_IA64_SN_CE_PROVIDER_H */
diff --git a/arch/ia64/include/asm/sn/tiocp.h b/arch/ia64/include/asm/sn/tiocp.h
new file mode 100644
index 000000000000..e8ad0bb5b6c5
--- /dev/null
+++ b/arch/ia64/include/asm/sn/tiocp.h
@@ -0,0 +1,257 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2003-2005 Silicon Graphics, Inc. All rights reserved.
+ */
+#ifndef _ASM_IA64_SN_PCI_TIOCP_H
+#define _ASM_IA64_SN_PCI_TIOCP_H
+
+#define TIOCP_HOST_INTR_ADDR            0x003FFFFFFFFFFFFFUL
+#define TIOCP_PCI64_CMDTYPE_MEM         (0x1ull << 60)
+#define TIOCP_PCI64_CMDTYPE_MSI         (0x3ull << 60)
+
+
+/*****************************************************************************
+ *********************** TIOCP MMR structure mapping ***************************
+ *****************************************************************************/
+
+struct tiocp{
+
+    /* 0x000000-0x00FFFF -- Local Registers */
+
+    /* 0x000000-0x000057 -- (Legacy Widget Space) Configuration */
+    u64		cp_id;				/* 0x000000 */
+    u64		cp_stat;			/* 0x000008 */
+    u64		cp_err_upper;			/* 0x000010 */
+    u64		cp_err_lower;			/* 0x000018 */
+    #define cp_err cp_err_lower
+    u64		cp_control;			/* 0x000020 */
+    u64		cp_req_timeout;			/* 0x000028 */
+    u64		cp_intr_upper;			/* 0x000030 */
+    u64		cp_intr_lower;			/* 0x000038 */
+    #define cp_intr cp_intr_lower
+    u64		cp_err_cmdword;			/* 0x000040 */
+    u64		_pad_000048;			/* 0x000048 */
+    u64		cp_tflush;			/* 0x000050 */
+
+    /* 0x000058-0x00007F -- Bridge-specific Configuration */
+    u64		cp_aux_err;			/* 0x000058 */
+    u64		cp_resp_upper;			/* 0x000060 */
+    u64		cp_resp_lower;			/* 0x000068 */
+    #define cp_resp cp_resp_lower
+    u64		cp_tst_pin_ctrl;		/* 0x000070 */
+    u64		cp_addr_lkerr;			/* 0x000078 */
+
+    /* 0x000080-0x00008F -- PMU & MAP */
+    u64		cp_dir_map;			/* 0x000080 */
+    u64		_pad_000088;			/* 0x000088 */
+
+    /* 0x000090-0x00009F -- SSRAM */
+    u64		cp_map_fault;			/* 0x000090 */
+    u64		_pad_000098;			/* 0x000098 */
+
+    /* 0x0000A0-0x0000AF -- Arbitration */
+    u64		cp_arb;				/* 0x0000A0 */
+    u64		_pad_0000A8;			/* 0x0000A8 */
+
+    /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */
+    u64		cp_ate_parity_err;		/* 0x0000B0 */
+    u64		_pad_0000B8;			/* 0x0000B8 */
+
+    /* 0x0000C0-0x0000FF -- PCI/GIO */
+    u64		cp_bus_timeout;			/* 0x0000C0 */
+    u64		cp_pci_cfg;			/* 0x0000C8 */
+    u64		cp_pci_err_upper;		/* 0x0000D0 */
+    u64		cp_pci_err_lower;		/* 0x0000D8 */
+    #define cp_pci_err cp_pci_err_lower
+    u64		_pad_0000E0[4];			/* 0x0000{E0..F8} */
+
+    /* 0x000100-0x0001FF -- Interrupt */
+    u64		cp_int_status;			/* 0x000100 */
+    u64		cp_int_enable;			/* 0x000108 */
+    u64		cp_int_rst_stat;		/* 0x000110 */
+    u64		cp_int_mode;			/* 0x000118 */
+    u64		cp_int_device;			/* 0x000120 */
+    u64		cp_int_host_err;		/* 0x000128 */
+    u64		cp_int_addr[8];			/* 0x0001{30,,,68} */
+    u64		cp_err_int_view;		/* 0x000170 */
+    u64		cp_mult_int;			/* 0x000178 */
+    u64		cp_force_always[8];		/* 0x0001{80,,,B8} */
+    u64		cp_force_pin[8];		/* 0x0001{C0,,,F8} */
+
+    /* 0x000200-0x000298 -- Device */
+    u64		cp_device[4];			/* 0x0002{00,,,18} */
+    u64		_pad_000220[4];			/* 0x0002{20,,,38} */
+    u64		cp_wr_req_buf[4];		/* 0x0002{40,,,58} */
+    u64		_pad_000260[4];			/* 0x0002{60,,,78} */
+    u64		cp_rrb_map[2];			/* 0x0002{80,,,88} */
+    #define cp_even_resp cp_rrb_map[0]			/* 0x000280 */
+    #define cp_odd_resp  cp_rrb_map[1]			/* 0x000288 */
+    u64		cp_resp_status;			/* 0x000290 */
+    u64		cp_resp_clear;			/* 0x000298 */
+
+    u64		_pad_0002A0[12];		/* 0x0002{A0..F8} */
+
+    /* 0x000300-0x0003F8 -- Buffer Address Match Registers */
+    struct {
+	u64	upper;				/* 0x0003{00,,,F0} */
+	u64	lower;				/* 0x0003{08,,,F8} */
+    } cp_buf_addr_match[16];
+
+    /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */
+    struct {
+	u64	flush_w_touch;			/* 0x000{400,,,5C0} */
+	u64	flush_wo_touch;			/* 0x000{408,,,5C8} */
+	u64	inflight;			/* 0x000{410,,,5D0} */
+	u64	prefetch;			/* 0x000{418,,,5D8} */
+	u64	total_pci_retry;		/* 0x000{420,,,5E0} */
+	u64	max_pci_retry;			/* 0x000{428,,,5E8} */
+	u64	max_latency;			/* 0x000{430,,,5F0} */
+	u64	clear_all;			/* 0x000{438,,,5F8} */
+    } cp_buf_count[8];
+
+
+    /* 0x000600-0x0009FF -- PCI/X registers */
+    u64		cp_pcix_bus_err_addr;		/* 0x000600 */
+    u64		cp_pcix_bus_err_attr;		/* 0x000608 */
+    u64		cp_pcix_bus_err_data;		/* 0x000610 */
+    u64		cp_pcix_pio_split_addr;		/* 0x000618 */
+    u64		cp_pcix_pio_split_attr;		/* 0x000620 */
+    u64		cp_pcix_dma_req_err_attr;	/* 0x000628 */
+    u64		cp_pcix_dma_req_err_addr;	/* 0x000630 */
+    u64		cp_pcix_timeout;		/* 0x000638 */
+
+    u64		_pad_000640[24];		/* 0x000{640,,,6F8} */
+
+    /* 0x000700-0x000737 -- Debug Registers */
+    u64		cp_ct_debug_ctl;		/* 0x000700 */
+    u64		cp_br_debug_ctl;		/* 0x000708 */
+    u64		cp_mux3_debug_ctl;		/* 0x000710 */
+    u64		cp_mux4_debug_ctl;		/* 0x000718 */
+    u64		cp_mux5_debug_ctl;		/* 0x000720 */
+    u64		cp_mux6_debug_ctl;		/* 0x000728 */
+    u64		cp_mux7_debug_ctl;		/* 0x000730 */
+
+    u64		_pad_000738[89];		/* 0x000{738,,,9F8} */
+
+    /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */
+    struct {
+	u64	cp_buf_addr;			/* 0x000{A00,,,AF0} */
+	u64	cp_buf_attr;			/* 0X000{A08,,,AF8} */
+    } cp_pcix_read_buf_64[16];
+
+    struct {
+	u64	cp_buf_addr;			/* 0x000{B00,,,BE0} */
+	u64	cp_buf_attr;			/* 0x000{B08,,,BE8} */
+	u64	cp_buf_valid;			/* 0x000{B10,,,BF0} */
+	u64	__pad1;				/* 0x000{B18,,,BF8} */
+    } cp_pcix_write_buf_64[8];
+
+    /* End of Local Registers -- Start of Address Map space */
+
+    char	_pad_000c00[0x010000 - 0x000c00];
+
+    /* 0x010000-0x011FF8 -- Internal ATE RAM (Auto Parity Generation) */
+    u64		cp_int_ate_ram[1024];		/* 0x010000-0x011FF8 */
+
+    char	_pad_012000[0x14000 - 0x012000];
+
+    /* 0x014000-0x015FF8 -- Internal ATE RAM (Manual Parity Generation) */
+    u64		cp_int_ate_ram_mp[1024];	/* 0x014000-0x015FF8 */
+
+    char	_pad_016000[0x18000 - 0x016000];
+
+    /* 0x18000-0x197F8 -- TIOCP Write Request Ram */
+    u64		cp_wr_req_lower[256];		/* 0x18000 - 0x187F8 */
+    u64		cp_wr_req_upper[256];		/* 0x18800 - 0x18FF8 */
+    u64		cp_wr_req_parity[256];		/* 0x19000 - 0x197F8 */
+
+    char	_pad_019800[0x1C000 - 0x019800];
+
+    /* 0x1C000-0x1EFF8 -- TIOCP Read Response Ram */
+    u64		cp_rd_resp_lower[512];		/* 0x1C000 - 0x1CFF8 */
+    u64		cp_rd_resp_upper[512];		/* 0x1D000 - 0x1DFF8 */
+    u64		cp_rd_resp_parity[512];		/* 0x1E000 - 0x1EFF8 */
+
+    char	_pad_01F000[0x20000 - 0x01F000];
+
+    /* 0x020000-0x021FFF -- Host Device (CP) Configuration Space (not used)  */
+    char	_pad_020000[0x021000 - 0x20000];
+
+    /* 0x021000-0x027FFF -- PCI Device Configuration Spaces */
+    union {
+	u8	c[0x1000 / 1];			/* 0x02{0000,,,7FFF} */
+	u16	s[0x1000 / 2];			/* 0x02{0000,,,7FFF} */
+	u32	l[0x1000 / 4];			/* 0x02{0000,,,7FFF} */
+	u64	d[0x1000 / 8];			/* 0x02{0000,,,7FFF} */
+	union {
+	    u8	c[0x100 / 1];
+	    u16	s[0x100 / 2];
+	    u32	l[0x100 / 4];
+	    u64	d[0x100 / 8];
+	} f[8];
+    } cp_type0_cfg_dev[7];				/* 0x02{1000,,,7FFF} */
+
+    /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */
+    union {
+	u8	c[0x1000 / 1];			/* 0x028000-0x029000 */
+	u16	s[0x1000 / 2];			/* 0x028000-0x029000 */
+	u32	l[0x1000 / 4];			/* 0x028000-0x029000 */
+	u64	d[0x1000 / 8];			/* 0x028000-0x029000 */
+	union {
+	    u8	c[0x100 / 1];
+	    u16	s[0x100 / 2];
+	    u32	l[0x100 / 4];
+	    u64	d[0x100 / 8];
+	} f[8];
+    } cp_type1_cfg;					/* 0x028000-0x029000 */
+
+    char		_pad_029000[0x030000-0x029000];
+
+    /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */
+    union {
+	u8	c[8 / 1];
+	u16	s[8 / 2];
+	u32	l[8 / 4];
+	u64	d[8 / 8];
+    } cp_pci_iack;					/* 0x030000-0x030007 */
+
+    char		_pad_030007[0x040000-0x030008];
+
+    /* 0x040000-0x040007 -- PCIX Special Cycle */
+    union {
+	u8	c[8 / 1];
+	u16	s[8 / 2];
+	u32	l[8 / 4];
+	u64	d[8 / 8];
+    } cp_pcix_cycle;					/* 0x040000-0x040007 */
+
+    char		_pad_040007[0x200000-0x040008];
+
+    /* 0x200000-0x7FFFFF -- PCI/GIO Device Spaces */
+    union {
+	u8	c[0x100000 / 1];
+	u16	s[0x100000 / 2];
+	u32	l[0x100000 / 4];
+	u64	d[0x100000 / 8];
+    } cp_devio_raw[6];					/* 0x200000-0x7FFFFF */
+
+    #define cp_devio(n)  cp_devio_raw[((n)<2)?(n*2):(n+2)]
+
+    char		_pad_800000[0xA00000-0x800000];
+
+    /* 0xA00000-0xBFFFFF -- PCI/GIO Device Spaces w/flush  */
+    union {
+	u8	c[0x100000 / 1];
+	u16	s[0x100000 / 2];
+	u32	l[0x100000 / 4];
+	u64	d[0x100000 / 8];
+    } cp_devio_raw_flush[6];				/* 0xA00000-0xBFFFFF */
+
+    #define cp_devio_flush(n)  cp_devio_raw_flush[((n)<2)?(n*2):(n+2)]
+
+};
+
+#endif 	/* _ASM_IA64_SN_PCI_TIOCP_H */
diff --git a/arch/ia64/include/asm/sn/tiocx.h b/arch/ia64/include/asm/sn/tiocx.h
new file mode 100644
index 000000000000..d29728492f36
--- /dev/null
+++ b/arch/ia64/include/asm/sn/tiocx.h
@@ -0,0 +1,72 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2005 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_SN_TIO_TIOCX_H
+#define _ASM_IA64_SN_TIO_TIOCX_H
+
+#ifdef __KERNEL__
+
+struct cx_id_s {
+	unsigned int part_num;
+	unsigned int mfg_num;
+	int nasid;
+};
+
+struct cx_dev {
+	struct cx_id_s cx_id;
+	int bt;				/* board/blade type */
+	void *soft;			/* driver specific */
+	struct hubdev_info *hubdev;
+	struct device dev;
+	struct cx_drv *driver;
+};
+
+struct cx_device_id {
+	unsigned int part_num;
+	unsigned int mfg_num;
+};
+
+struct cx_drv {
+	char *name;
+	const struct cx_device_id *id_table;
+	struct device_driver driver;
+	int (*probe) (struct cx_dev * dev, const struct cx_device_id * id);
+	int (*remove) (struct cx_dev * dev);
+};
+
+/* create DMA address by stripping AS bits */
+#define TIOCX_DMA_ADDR(a) (u64)((u64)(a) & 0xffffcfffffffffUL)
+
+#define TIOCX_TO_TIOCX_DMA_ADDR(a) (u64)(((u64)(a) & 0xfffffffff) |  \
+                                  ((((u64)(a)) & 0xffffc000000000UL) <<2))
+
+#define TIO_CE_ASIC_PARTNUM 0xce00
+#define TIOCX_CORELET 3
+
+/* These are taken from tio_mmr_as.h */
+#define TIO_ICE_FRZ_CFG               TIO_MMR_ADDR_MOD(0x00000000b0008100UL)
+#define TIO_ICE_PMI_TX_CFG            TIO_MMR_ADDR_MOD(0x00000000b000b100UL)
+#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3 TIO_MMR_ADDR_MOD(0x00000000b000be18UL)
+#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3_CREDIT_CNT_MASK 0x000000000000000fUL
+
+#define to_cx_dev(n) container_of(n, struct cx_dev, dev)
+#define to_cx_driver(drv) container_of(drv, struct cx_drv, driver)
+
+extern struct sn_irq_info *tiocx_irq_alloc(nasid_t, int, int, nasid_t, int);
+extern void tiocx_irq_free(struct sn_irq_info *);
+extern int cx_device_unregister(struct cx_dev *);
+extern int cx_device_register(nasid_t, int, int, struct hubdev_info *, int);
+extern int cx_driver_unregister(struct cx_drv *);
+extern int cx_driver_register(struct cx_drv *);
+extern u64 tiocx_dma_addr(u64 addr);
+extern u64 tiocx_swin_base(int nasid);
+extern void tiocx_mmr_store(int nasid, u64 offset, u64 value);
+extern u64 tiocx_mmr_load(int nasid, u64 offset);
+
+#endif				//  __KERNEL__
+#endif				// _ASM_IA64_SN_TIO_TIOCX__
diff --git a/arch/ia64/include/asm/sn/types.h b/arch/ia64/include/asm/sn/types.h
new file mode 100644
index 000000000000..8e04ee211e59
--- /dev/null
+++ b/arch/ia64/include/asm/sn/types.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999,2001-2003 Silicon Graphics, Inc.  All Rights Reserved.
+ * Copyright (C) 1999 by Ralf Baechle
+ */
+#ifndef _ASM_IA64_SN_TYPES_H
+#define _ASM_IA64_SN_TYPES_H
+
+#include <linux/types.h>
+
+typedef unsigned long 	cpuid_t;
+typedef signed short	nasid_t;	/* node id in numa-as-id space */
+typedef signed char	partid_t;	/* partition ID type */
+typedef unsigned int    moduleid_t;     /* user-visible module number type */
+typedef unsigned int    cmoduleid_t;    /* kernel compact module id type */
+typedef unsigned char	slotid_t;	/* slot (blade) within module */
+typedef unsigned char	slabid_t;	/* slab (asic) within slot */
+typedef u64 nic_t;
+typedef unsigned long iopaddr_t;
+typedef unsigned long paddr_t;
+typedef short cnodeid_t;
+
+#endif /* _ASM_IA64_SN_TYPES_H */
diff --git a/arch/ia64/include/asm/socket.h b/arch/ia64/include/asm/socket.h
new file mode 100644
index 000000000000..d5ef0aa3e312
--- /dev/null
+++ b/arch/ia64/include/asm/socket.h
@@ -0,0 +1,66 @@
+#ifndef _ASM_IA64_SOCKET_H
+#define _ASM_IA64_SOCKET_H
+
+/*
+ * Socket related defines.
+ *
+ * Based on <asm-i386/socket.h>.
+ *
+ * Modified 1998-2000
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE		25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER	26
+#define SO_DETACH_FILTER	27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC             31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#endif /* _ASM_IA64_SOCKET_H */
diff --git a/arch/ia64/include/asm/sockios.h b/arch/ia64/include/asm/sockios.h
new file mode 100644
index 000000000000..15c92468ad38
--- /dev/null
+++ b/arch/ia64/include/asm/sockios.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_IA64_SOCKIOS_H
+#define _ASM_IA64_SOCKIOS_H
+
+/*
+ * Socket-level I/O control calls.
+ *
+ * Based on <asm-i386/sockios.h>.
+ *
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* _ASM_IA64_SOCKIOS_H */
diff --git a/arch/ia64/include/asm/sparsemem.h b/arch/ia64/include/asm/sparsemem.h
new file mode 100644
index 000000000000..67a7c40ec27f
--- /dev/null
+++ b/arch/ia64/include/asm/sparsemem.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_IA64_SPARSEMEM_H
+#define _ASM_IA64_SPARSEMEM_H
+
+#ifdef CONFIG_SPARSEMEM
+/*
+ * SECTION_SIZE_BITS            2^N: how big each section will be
+ * MAX_PHYSMEM_BITS             2^N: how much memory we can have in that space
+ */
+
+#define SECTION_SIZE_BITS	(30)
+#define MAX_PHYSMEM_BITS	(50)
+#ifdef CONFIG_FORCE_MAX_ZONEORDER
+#if ((CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT) > SECTION_SIZE_BITS)
+#undef SECTION_SIZE_BITS
+#define SECTION_SIZE_BITS (CONFIG_FORCE_MAX_ZONEORDER - 1 + PAGE_SHIFT)
+#endif
+#endif
+
+#endif /* CONFIG_SPARSEMEM */
+#endif /* _ASM_IA64_SPARSEMEM_H */
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
new file mode 100644
index 000000000000..0229fb95fb38
--- /dev/null
+++ b/arch/ia64/include/asm/spinlock.h
@@ -0,0 +1,220 @@
+#ifndef _ASM_IA64_SPINLOCK_H
+#define _ASM_IA64_SPINLOCK_H
+
+/*
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Walt Drummond <drummond@valinux.com>
+ *
+ * This file is used for SMP configurations only.
+ */
+
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+
+#include <asm/atomic.h>
+#include <asm/intrinsics.h>
+#include <asm/system.h>
+
+#define __raw_spin_lock_init(x)			((x)->lock = 0)
+
+#ifdef ASM_SUPPORTED
+/*
+ * Try to get the lock.  If we fail to get the lock, make a non-standard call to
+ * ia64_spinlock_contention().  We do not use a normal call because that would force all
+ * callers of __raw_spin_lock() to be non-leaf routines.  Instead, ia64_spinlock_contention() is
+ * carefully coded to touch only those registers that __raw_spin_lock() marks "clobbered".
+ */
+
+#define IA64_SPINLOCK_CLOBBERS "ar.ccv", "ar.pfs", "p14", "p15", "r27", "r28", "r29", "r30", "b6", "memory"
+
+static inline void
+__raw_spin_lock_flags (raw_spinlock_t *lock, unsigned long flags)
+{
+	register volatile unsigned int *ptr asm ("r31") = &lock->lock;
+
+#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
+# ifdef CONFIG_ITANIUM
+	/* don't use brl on Itanium... */
+	asm volatile ("{\n\t"
+		      "  mov ar.ccv = r0\n\t"
+		      "  mov r28 = ip\n\t"
+		      "  mov r30 = 1;;\n\t"
+		      "}\n\t"
+		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv\n\t"
+		      "movl r29 = ia64_spinlock_contention_pre3_4;;\n\t"
+		      "cmp4.ne p14, p0 = r30, r0\n\t"
+		      "mov b6 = r29;;\n\t"
+		      "mov r27=%2\n\t"
+		      "(p14) br.cond.spnt.many b6"
+		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# else
+	asm volatile ("{\n\t"
+		      "  mov ar.ccv = r0\n\t"
+		      "  mov r28 = ip\n\t"
+		      "  mov r30 = 1;;\n\t"
+		      "}\n\t"
+		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv;;\n\t"
+		      "cmp4.ne p14, p0 = r30, r0\n\t"
+		      "mov r27=%2\n\t"
+		      "(p14) brl.cond.spnt.many ia64_spinlock_contention_pre3_4;;"
+		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# endif /* CONFIG_MCKINLEY */
+#else
+# ifdef CONFIG_ITANIUM
+	/* don't use brl on Itanium... */
+	/* mis-declare, so we get the entry-point, not it's function descriptor: */
+	asm volatile ("mov r30 = 1\n\t"
+		      "mov r27=%2\n\t"
+		      "mov ar.ccv = r0;;\n\t"
+		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv\n\t"
+		      "movl r29 = ia64_spinlock_contention;;\n\t"
+		      "cmp4.ne p14, p0 = r30, r0\n\t"
+		      "mov b6 = r29;;\n\t"
+		      "(p14) br.call.spnt.many b6 = b6"
+		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# else
+	asm volatile ("mov r30 = 1\n\t"
+		      "mov r27=%2\n\t"
+		      "mov ar.ccv = r0;;\n\t"
+		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv;;\n\t"
+		      "cmp4.ne p14, p0 = r30, r0\n\t"
+		      "(p14) brl.call.spnt.many b6=ia64_spinlock_contention;;"
+		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
+# endif /* CONFIG_MCKINLEY */
+#endif
+}
+
+#define __raw_spin_lock(lock) __raw_spin_lock_flags(lock, 0)
+
+/* Unlock by doing an ordered store and releasing the cacheline with nta */
+static inline void __raw_spin_unlock(raw_spinlock_t *x) {
+	barrier();
+	asm volatile ("st4.rel.nta [%0] = r0\n\t" :: "r"(x));
+}
+
+#else /* !ASM_SUPPORTED */
+#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+# define __raw_spin_lock(x)								\
+do {											\
+	__u32 *ia64_spinlock_ptr = (__u32 *) (x);					\
+	__u64 ia64_spinlock_val;							\
+	ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);			\
+	if (unlikely(ia64_spinlock_val)) {						\
+		do {									\
+			while (*ia64_spinlock_ptr)					\
+				ia64_barrier();						\
+			ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);	\
+		} while (ia64_spinlock_val);						\
+	}										\
+} while (0)
+#define __raw_spin_unlock(x)	do { barrier(); ((raw_spinlock_t *) x)->lock = 0; } while (0)
+#endif /* !ASM_SUPPORTED */
+
+#define __raw_spin_is_locked(x)		((x)->lock != 0)
+#define __raw_spin_trylock(x)		(cmpxchg_acq(&(x)->lock, 0, 1) == 0)
+#define __raw_spin_unlock_wait(lock) \
+	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+
+#define __raw_read_can_lock(rw)		(*(volatile int *)(rw) >= 0)
+#define __raw_write_can_lock(rw)	(*(volatile int *)(rw) == 0)
+
+#define __raw_read_lock(rw)								\
+do {											\
+	raw_rwlock_t *__read_lock_ptr = (rw);						\
+											\
+	while (unlikely(ia64_fetchadd(1, (int *) __read_lock_ptr, acq) < 0)) {		\
+		ia64_fetchadd(-1, (int *) __read_lock_ptr, rel);			\
+		while (*(volatile int *)__read_lock_ptr < 0)				\
+			cpu_relax();							\
+	}										\
+} while (0)
+
+#define __raw_read_unlock(rw)					\
+do {								\
+	raw_rwlock_t *__read_lock_ptr = (rw);			\
+	ia64_fetchadd(-1, (int *) __read_lock_ptr, rel);	\
+} while (0)
+
+#ifdef ASM_SUPPORTED
+#define __raw_write_lock(rw)							\
+do {										\
+ 	__asm__ __volatile__ (							\
+		"mov ar.ccv = r0\n"						\
+		"dep r29 = -1, r0, 31, 1;;\n"					\
+		"1:\n"								\
+		"ld4 r2 = [%0];;\n"						\
+		"cmp4.eq p0,p7 = r0,r2\n"					\
+		"(p7) br.cond.spnt.few 1b \n"					\
+		"cmpxchg4.acq r2 = [%0], r29, ar.ccv;;\n"			\
+		"cmp4.eq p0,p7 = r0, r2\n"					\
+		"(p7) br.cond.spnt.few 1b;;\n"					\
+		:: "r"(rw) : "ar.ccv", "p7", "r2", "r29", "memory");		\
+} while(0)
+
+#define __raw_write_trylock(rw)							\
+({										\
+	register long result;							\
+										\
+	__asm__ __volatile__ (							\
+		"mov ar.ccv = r0\n"						\
+		"dep r29 = -1, r0, 31, 1;;\n"					\
+		"cmpxchg4.acq %0 = [%1], r29, ar.ccv\n"				\
+		: "=r"(result) : "r"(rw) : "ar.ccv", "r29", "memory");		\
+	(result == 0);								\
+})
+
+static inline void __raw_write_unlock(raw_rwlock_t *x)
+{
+	u8 *y = (u8 *)x;
+	barrier();
+	asm volatile ("st1.rel.nta [%0] = r0\n\t" :: "r"(y+3) : "memory" );
+}
+
+#else /* !ASM_SUPPORTED */
+
+#define __raw_write_lock(l)								\
+({											\
+	__u64 ia64_val, ia64_set_val = ia64_dep_mi(-1, 0, 31, 1);			\
+	__u32 *ia64_write_lock_ptr = (__u32 *) (l);					\
+	do {										\
+		while (*ia64_write_lock_ptr)						\
+			ia64_barrier();							\
+		ia64_val = ia64_cmpxchg4_acq(ia64_write_lock_ptr, ia64_set_val, 0);	\
+	} while (ia64_val);								\
+})
+
+#define __raw_write_trylock(rw)						\
+({									\
+	__u64 ia64_val;							\
+	__u64 ia64_set_val = ia64_dep_mi(-1, 0, 31,1);			\
+	ia64_val = ia64_cmpxchg4_acq((__u32 *)(rw), ia64_set_val, 0);	\
+	(ia64_val == 0);						\
+})
+
+static inline void __raw_write_unlock(raw_rwlock_t *x)
+{
+	barrier();
+	x->write_lock = 0;
+}
+
+#endif /* !ASM_SUPPORTED */
+
+static inline int __raw_read_trylock(raw_rwlock_t *x)
+{
+	union {
+		raw_rwlock_t lock;
+		__u32 word;
+	} old, new;
+	old.lock = new.lock = *x;
+	old.lock.write_lock = new.lock.write_lock = 0;
+	++new.lock.read_counter;
+	return (u32)ia64_cmpxchg4_acq((__u32 *)(x), new.word, old.word) == old.word;
+}
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /*  _ASM_IA64_SPINLOCK_H */
diff --git a/arch/ia64/include/asm/spinlock_types.h b/arch/ia64/include/asm/spinlock_types.h
new file mode 100644
index 000000000000..474e46f1ab4a
--- /dev/null
+++ b/arch/ia64/include/asm/spinlock_types.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_IA64_SPINLOCK_TYPES_H
+#define _ASM_IA64_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	volatile unsigned int read_counter	: 31;
+	volatile unsigned int write_lock	:  1;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ 0, 0 }
+
+#endif
diff --git a/arch/ia64/include/asm/stat.h b/arch/ia64/include/asm/stat.h
new file mode 100644
index 000000000000..367bb90cdffa
--- /dev/null
+++ b/arch/ia64/include/asm/stat.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_IA64_STAT_H
+#define _ASM_IA64_STAT_H
+
+/*
+ * Modified 1998, 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+struct stat {
+	unsigned long	st_dev;
+	unsigned long	st_ino;
+	unsigned long	st_nlink;
+	unsigned int	st_mode;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	__pad0;
+	unsigned long	st_rdev;
+	unsigned long	st_size;
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+	unsigned long	st_blksize;
+	long		st_blocks;
+	unsigned long	__unused[3];
+};
+
+#define STAT_HAVE_NSEC 1
+
+struct ia64_oldstat {
+	unsigned int	st_dev;
+	unsigned int	st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	st_rdev;
+	unsigned int	__pad1;
+	unsigned long	st_size;
+	unsigned long	st_atime;
+	unsigned long	st_mtime;
+	unsigned long	st_ctime;
+	unsigned int	st_blksize;
+	int		st_blocks;
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+};
+
+#endif /* _ASM_IA64_STAT_H */
diff --git a/arch/ia64/include/asm/statfs.h b/arch/ia64/include/asm/statfs.h
new file mode 100644
index 000000000000..811097974f31
--- /dev/null
+++ b/arch/ia64/include/asm/statfs.h
@@ -0,0 +1,62 @@
+#ifndef _ASM_IA64_STATFS_H
+#define _ASM_IA64_STATFS_H
+
+/*
+ * Based on <asm-i386/statfs.h>.
+ *
+ * Modified 1998, 1999, 2003
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#ifndef __KERNEL_STRICT_NAMES
+# include <linux/types.h>
+typedef __kernel_fsid_t	fsid_t;
+#endif
+
+/*
+ * This is ugly --- we're already 64-bit, so just duplicate the definitions
+ */
+struct statfs {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+
+struct statfs64 {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+} __attribute__((packed));
+
+#endif /* _ASM_IA64_STATFS_H */
diff --git a/arch/ia64/include/asm/string.h b/arch/ia64/include/asm/string.h
new file mode 100644
index 000000000000..85fd65c52a8c
--- /dev/null
+++ b/arch/ia64/include/asm/string.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_IA64_STRING_H
+#define _ASM_IA64_STRING_H
+
+/*
+ * Here is where we want to put optimized versions of the string
+ * routines.
+ *
+ * Copyright (C) 1998-2000, 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+
+#define __HAVE_ARCH_STRLEN	1 /* see arch/ia64/lib/strlen.S */
+#define __HAVE_ARCH_MEMSET	1 /* see arch/ia64/lib/memset.S */
+#define __HAVE_ARCH_MEMCPY	1 /* see arch/ia64/lib/memcpy.S */
+
+extern __kernel_size_t strlen (const char *);
+extern void *memcpy (void *, const void *, __kernel_size_t);
+extern void *memset (void *, int, __kernel_size_t);
+
+#endif /* _ASM_IA64_STRING_H */
diff --git a/arch/ia64/include/asm/suspend.h b/arch/ia64/include/asm/suspend.h
new file mode 100644
index 000000000000..b05bbb6074e2
--- /dev/null
+++ b/arch/ia64/include/asm/suspend.h
@@ -0,0 +1 @@
+/* dummy (must be non-empty to prevent prejudicial removal...) */
diff --git a/arch/ia64/include/asm/system.h b/arch/ia64/include/asm/system.h
new file mode 100644
index 000000000000..927a381c20ca
--- /dev/null
+++ b/arch/ia64/include/asm/system.h
@@ -0,0 +1,292 @@
+#ifndef _ASM_IA64_SYSTEM_H
+#define _ASM_IA64_SYSTEM_H
+
+/*
+ * System defines. Note that this is included both from .c and .S
+ * files, so it does only defines, not any C code.  This is based
+ * on information published in the Processor Abstraction Layer
+ * and the System Abstraction Layer manual.
+ *
+ * Copyright (C) 1998-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ * Copyright (C) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ * Copyright (C) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+#include <asm/kregs.h>
+#include <asm/page.h>
+#include <asm/pal.h>
+#include <asm/percpu.h>
+
+#define GATE_ADDR		RGN_BASE(RGN_GATE)
+
+/*
+ * 0xa000000000000000+2*PERCPU_PAGE_SIZE
+ * - 0xa000000000000000+3*PERCPU_PAGE_SIZE remain unmapped (guard page)
+ */
+#define KERNEL_START		 (GATE_ADDR+__IA64_UL_CONST(0x100000000))
+#define PERCPU_ADDR		(-PERCPU_PAGE_SIZE)
+#define LOAD_OFFSET		(KERNEL_START - KERNEL_TR_PAGE_SIZE)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#define AT_VECTOR_SIZE_ARCH 2 /* entries in ARCH_DLINFO */
+
+struct pci_vector_struct {
+	__u16 segment;	/* PCI Segment number */
+	__u16 bus;	/* PCI Bus number */
+	__u32 pci_id;	/* ACPI split 16 bits device, 16 bits function (see section 6.1.1) */
+	__u8 pin;	/* PCI PIN (0 = A, 1 = B, 2 = C, 3 = D) */
+	__u32 irq;	/* IRQ assigned */
+};
+
+extern struct ia64_boot_param {
+	__u64 command_line;		/* physical address of command line arguments */
+	__u64 efi_systab;		/* physical address of EFI system table */
+	__u64 efi_memmap;		/* physical address of EFI memory map */
+	__u64 efi_memmap_size;		/* size of EFI memory map */
+	__u64 efi_memdesc_size;		/* size of an EFI memory map descriptor */
+	__u32 efi_memdesc_version;	/* memory descriptor version */
+	struct {
+		__u16 num_cols;	/* number of columns on console output device */
+		__u16 num_rows;	/* number of rows on console output device */
+		__u16 orig_x;	/* cursor's x position */
+		__u16 orig_y;	/* cursor's y position */
+	} console_info;
+	__u64 fpswa;		/* physical address of the fpswa interface */
+	__u64 initrd_start;
+	__u64 initrd_size;
+} *ia64_boot_param;
+
+/*
+ * Macros to force memory ordering.  In these descriptions, "previous"
+ * and "subsequent" refer to program order; "visible" means that all
+ * architecturally visible effects of a memory access have occurred
+ * (at a minimum, this means the memory has been read or written).
+ *
+ *   wmb():	Guarantees that all preceding stores to memory-
+ *		like regions are visible before any subsequent
+ *		stores and that all following stores will be
+ *		visible only after all previous stores.
+ *   rmb():	Like wmb(), but for reads.
+ *   mb():	wmb()/rmb() combo, i.e., all previous memory
+ *		accesses are visible before all subsequent
+ *		accesses and vice versa.  This is also known as
+ *		a "fence."
+ *
+ * Note: "mb()" and its variants cannot be used as a fence to order
+ * accesses to memory mapped I/O registers.  For that, mf.a needs to
+ * be used.  However, we don't want to always use mf.a because (a)
+ * it's (presumably) much slower than mf and (b) mf.a is supported for
+ * sequential memory pages only.
+ */
+#define mb()	ia64_mf()
+#define rmb()	mb()
+#define wmb()	mb()
+#define read_barrier_depends()	do { } while(0)
+
+#ifdef CONFIG_SMP
+# define smp_mb()	mb()
+# define smp_rmb()	rmb()
+# define smp_wmb()	wmb()
+# define smp_read_barrier_depends()	read_barrier_depends()
+#else
+# define smp_mb()	barrier()
+# define smp_rmb()	barrier()
+# define smp_wmb()	barrier()
+# define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+/*
+ * XXX check on this ---I suspect what Linus really wants here is
+ * acquire vs release semantics but we can't discuss this stuff with
+ * Linus just yet.  Grrr...
+ */
+#define set_mb(var, value)	do { (var) = (value); mb(); } while (0)
+
+#define safe_halt()         ia64_pal_halt_light()    /* PAL_HALT_LIGHT */
+
+/*
+ * The group barrier in front of the rsm & ssm are necessary to ensure
+ * that none of the previous instructions in the same group are
+ * affected by the rsm/ssm.
+ */
+/* For spinlocks etc */
+
+/*
+ * - clearing psr.i is implicitly serialized (visible by next insn)
+ * - setting psr.i requires data serialization
+ * - we need a stop-bit before reading PSR because we sometimes
+ *   write a floating-point register right before reading the PSR
+ *   and that writes to PSR.mfl
+ */
+#ifdef CONFIG_PARAVIRT
+#define __local_save_flags()	ia64_get_psr_i()
+#else
+#define __local_save_flags()	ia64_getreg(_IA64_REG_PSR)
+#endif
+
+#define __local_irq_save(x)			\
+do {						\
+	ia64_stop();				\
+	(x) = __local_save_flags();		\
+	ia64_stop();				\
+	ia64_rsm(IA64_PSR_I);			\
+} while (0)
+
+#define __local_irq_disable()			\
+do {						\
+	ia64_stop();				\
+	ia64_rsm(IA64_PSR_I);			\
+} while (0)
+
+#define __local_irq_restore(x)	ia64_intrin_local_irq_restore((x) & IA64_PSR_I)
+
+#ifdef CONFIG_IA64_DEBUG_IRQ
+
+  extern unsigned long last_cli_ip;
+
+# define __save_ip()		last_cli_ip = ia64_getreg(_IA64_REG_IP)
+
+# define local_irq_save(x)					\
+do {								\
+	unsigned long __psr;					\
+								\
+	__local_irq_save(__psr);				\
+	if (__psr & IA64_PSR_I)					\
+		__save_ip();					\
+	(x) = __psr;						\
+} while (0)
+
+# define local_irq_disable()	do { unsigned long __x; local_irq_save(__x); } while (0)
+
+# define local_irq_restore(x)					\
+do {								\
+	unsigned long __old_psr, __psr = (x);			\
+								\
+	local_save_flags(__old_psr);				\
+	__local_irq_restore(__psr);				\
+	if ((__old_psr & IA64_PSR_I) && !(__psr & IA64_PSR_I))	\
+		__save_ip();					\
+} while (0)
+
+#else /* !CONFIG_IA64_DEBUG_IRQ */
+# define local_irq_save(x)	__local_irq_save(x)
+# define local_irq_disable()	__local_irq_disable()
+# define local_irq_restore(x)	__local_irq_restore(x)
+#endif /* !CONFIG_IA64_DEBUG_IRQ */
+
+#define local_irq_enable()	({ ia64_stop(); ia64_ssm(IA64_PSR_I); ia64_srlz_d(); })
+#define local_save_flags(flags)	({ ia64_stop(); (flags) = __local_save_flags(); })
+
+#define irqs_disabled()				\
+({						\
+	unsigned long __ia64_id_flags;		\
+	local_save_flags(__ia64_id_flags);	\
+	(__ia64_id_flags & IA64_PSR_I) == 0;	\
+})
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_IA32_SUPPORT
+# define IS_IA32_PROCESS(regs)	(ia64_psr(regs)->is != 0)
+#else
+# define IS_IA32_PROCESS(regs)		0
+struct task_struct;
+static inline void ia32_save_state(struct task_struct *t __attribute__((unused))){}
+static inline void ia32_load_state(struct task_struct *t __attribute__((unused))){}
+#endif
+
+/*
+ * Context switch from one thread to another.  If the two threads have
+ * different address spaces, schedule() has already taken care of
+ * switching to the new address space by calling switch_mm().
+ *
+ * Disabling access to the fph partition and the debug-register
+ * context switch MUST be done before calling ia64_switch_to() since a
+ * newly created thread returns directly to
+ * ia64_ret_from_syscall_clear_r8.
+ */
+extern struct task_struct *ia64_switch_to (void *next_task);
+
+struct task_struct;
+
+extern void ia64_save_extra (struct task_struct *task);
+extern void ia64_load_extra (struct task_struct *task);
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+extern void ia64_account_on_switch (struct task_struct *prev, struct task_struct *next);
+# define IA64_ACCOUNT_ON_SWITCH(p,n) ia64_account_on_switch(p,n)
+#else
+# define IA64_ACCOUNT_ON_SWITCH(p,n)
+#endif
+
+#ifdef CONFIG_PERFMON
+  DECLARE_PER_CPU(unsigned long, pfm_syst_info);
+# define PERFMON_IS_SYSWIDE() (__get_cpu_var(pfm_syst_info) & 0x1)
+#else
+# define PERFMON_IS_SYSWIDE() (0)
+#endif
+
+#define IA64_HAS_EXTRA_STATE(t)							\
+	((t)->thread.flags & (IA64_THREAD_DBG_VALID|IA64_THREAD_PM_VALID)	\
+	 || IS_IA32_PROCESS(task_pt_regs(t)) || PERFMON_IS_SYSWIDE())
+
+#define __switch_to(prev,next,last) do {							 \
+	IA64_ACCOUNT_ON_SWITCH(prev, next);							 \
+	if (IA64_HAS_EXTRA_STATE(prev))								 \
+		ia64_save_extra(prev);								 \
+	if (IA64_HAS_EXTRA_STATE(next))								 \
+		ia64_load_extra(next);								 \
+	ia64_psr(task_pt_regs(next))->dfh = !ia64_is_local_fpu_owner(next);			 \
+	(last) = ia64_switch_to((next));							 \
+} while (0)
+
+#ifdef CONFIG_SMP
+/*
+ * In the SMP case, we save the fph state when context-switching away from a thread that
+ * modified fph.  This way, when the thread gets scheduled on another CPU, the CPU can
+ * pick up the state from task->thread.fph, avoiding the complication of having to fetch
+ * the latest fph state from another CPU.  In other words: eager save, lazy restore.
+ */
+# define switch_to(prev,next,last) do {						\
+	if (ia64_psr(task_pt_regs(prev))->mfh && ia64_is_local_fpu_owner(prev)) {				\
+		ia64_psr(task_pt_regs(prev))->mfh = 0;			\
+		(prev)->thread.flags |= IA64_THREAD_FPH_VALID;			\
+		__ia64_save_fpu((prev)->thread.fph);				\
+	}									\
+	__switch_to(prev, next, last);						\
+	/* "next" in old context is "current" in new context */			\
+	if (unlikely((current->thread.flags & IA64_THREAD_MIGRATION) &&	       \
+		     (task_cpu(current) !=				       \
+		      		      task_thread_info(current)->last_cpu))) { \
+		platform_migrate(current);				       \
+		task_thread_info(current)->last_cpu = task_cpu(current);       \
+	}								       \
+} while (0)
+#else
+# define switch_to(prev,next,last)	__switch_to(prev, next, last)
+#endif
+
+#define __ARCH_WANT_UNLOCKED_CTXSW
+#define ARCH_HAS_PREFETCH_SWITCH_STACK
+#define ia64_platform_is(x) (strcmp(x, platform_name) == 0)
+
+void cpu_idle_wait(void);
+
+#define arch_align_stack(x) (x)
+
+void default_idle(void);
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+extern void account_system_vtime(struct task_struct *);
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_IA64_SYSTEM_H */
diff --git a/arch/ia64/include/asm/termbits.h b/arch/ia64/include/asm/termbits.h
new file mode 100644
index 000000000000..9f162e0089ad
--- /dev/null
+++ b/arch/ia64/include/asm/termbits.h
@@ -0,0 +1,207 @@
+#ifndef _ASM_IA64_TERMBITS_H
+#define _ASM_IA64_TERMBITS_H
+
+/*
+ * Based on <asm-i386/termbits.h>.
+ *
+ * Modified 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ *
+ * 99/01/28	Added new baudrates
+ */
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    BOTHER 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000		/* input baud rate */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* _ASM_IA64_TERMBITS_H */
diff --git a/arch/ia64/include/asm/termios.h b/arch/ia64/include/asm/termios.h
new file mode 100644
index 000000000000..689d218c0c28
--- /dev/null
+++ b/arch/ia64/include/asm/termios.h
@@ -0,0 +1,97 @@
+#ifndef _ASM_IA64_TERMIOS_H
+#define _ASM_IA64_TERMIOS_H
+
+/*
+ * Modified 1999
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ *
+ * 99/01/28	Added N_IRDA and N_SMSBLOCK
+ */
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+# ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) {	\
+	unsigned short __tmp;				\
+	get_user(__tmp,&(termio)->x);			\
+	*(unsigned short *) &(termios)->x = __tmp;	\
+}
+
+#define user_termio_to_kernel_termios(termios, termio)		\
+({								\
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag);		\
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag);		\
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag);		\
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag);		\
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC);	\
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios)		\
+({								\
+	put_user((termios)->c_iflag, &(termio)->c_iflag);	\
+	put_user((termios)->c_oflag, &(termio)->c_oflag);	\
+	put_user((termios)->c_cflag, &(termio)->c_cflag);	\
+	put_user((termios)->c_lflag, &(termio)->c_lflag);	\
+	put_user((termios)->c_line,  &(termio)->c_line);	\
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC);	\
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+# endif /* __KERNEL__ */
+
+#endif /* _ASM_IA64_TERMIOS_H */
diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h
new file mode 100644
index 000000000000..7c60fcdd2efd
--- /dev/null
+++ b/arch/ia64/include/asm/thread_info.h
@@ -0,0 +1,148 @@
+/*
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+#ifndef _ASM_IA64_THREAD_INFO_H
+#define _ASM_IA64_THREAD_INFO_H
+
+#ifndef ASM_OFFSETS_C
+#include <asm/asm-offsets.h>
+#endif
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+
+#define PREEMPT_ACTIVE_BIT 30
+#define PREEMPT_ACTIVE	(1 << PREEMPT_ACTIVE_BIT)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * On IA-64, we want to keep the task structure and kernel stack together, so they can be
+ * mapped by a single TLB entry and so they can be addressed by the "current" pointer
+ * without having to do pointer masking.
+ */
+struct thread_info {
+	struct task_struct *task;	/* XXX not really needed, except for dup_task_struct() */
+	struct exec_domain *exec_domain;/* execution domain */
+	__u32 flags;			/* thread_info flags (see TIF_*) */
+	__u32 cpu;			/* current CPU */
+	__u32 last_cpu;			/* Last CPU thread ran on */
+	__u32 status;			/* Thread synchronous flags */
+	mm_segment_t addr_limit;	/* user-level address space limit */
+	int preempt_count;		/* 0=premptable, <0=BUG; will also serve as bh-counter */
+	struct restart_block restart_block;
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+	__u64 ac_stamp;
+	__u64 ac_leave;
+	__u64 ac_stime;
+	__u64 ac_utime;
+#endif
+};
+
+#define THREAD_SIZE			KERNEL_STACK_SIZE
+
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.addr_limit	= KERNEL_DS,		\
+	.preempt_count	= 0,			\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+#ifndef ASM_OFFSETS_C
+/* how to get the thread information struct from C */
+#define current_thread_info()	((struct thread_info *) ((char *) current + IA64_TASK_SIZE))
+#define alloc_thread_info(tsk)	((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE))
+#define task_thread_info(tsk)	((struct thread_info *) ((char *) (tsk) + IA64_TASK_SIZE))
+#else
+#define current_thread_info()	((struct thread_info *) 0)
+#define alloc_thread_info(tsk)	((struct thread_info *) 0)
+#define task_thread_info(tsk)	((struct thread_info *) 0)
+#endif
+#define free_thread_info(ti)	/* nothing */
+#define task_stack_page(tsk)	((void *)(tsk))
+
+#define __HAVE_THREAD_FUNCTIONS
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#define setup_thread_stack(p, org)			\
+	*task_thread_info(p) = *task_thread_info(org);	\
+	task_thread_info(p)->ac_stime = 0;		\
+	task_thread_info(p)->ac_utime = 0;		\
+	task_thread_info(p)->task = (p);
+#else
+#define setup_thread_stack(p, org) \
+	*task_thread_info(p) = *task_thread_info(org); \
+	task_thread_info(p)->task = (p);
+#endif
+#define end_of_stack(p) (unsigned long *)((void *)(p) + IA64_RBS_OFFSET)
+
+#define __HAVE_ARCH_TASK_STRUCT_ALLOCATOR
+#define alloc_task_struct()	((struct task_struct *)__get_free_pages(GFP_KERNEL | __GFP_COMP, KERNEL_STACK_SIZE_ORDER))
+#define free_task_struct(tsk)	free_pages((unsigned long) (tsk), KERNEL_STACK_SIZE_ORDER)
+
+#define tsk_set_notify_resume(tsk) \
+	set_ti_thread_flag(task_thread_info(tsk), TIF_NOTIFY_RESUME)
+extern void tsk_clear_notify_resume(struct task_struct *tsk);
+#endif /* !__ASSEMBLY */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in least-significant 16 bits, other flags
+ *   in top 16 bits
+ */
+#define TIF_SIGPENDING		0	/* signal pending */
+#define TIF_NEED_RESCHED	1	/* rescheduling necessary */
+#define TIF_SYSCALL_TRACE	2	/* syscall trace active */
+#define TIF_SYSCALL_AUDIT	3	/* syscall auditing active */
+#define TIF_SINGLESTEP		4	/* restore singlestep on return to user mode */
+#define TIF_NOTIFY_RESUME	6	/* resumption notification requested */
+#define TIF_POLLING_NRFLAG	16	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		17
+#define TIF_MCA_INIT		18	/* this task is processing MCA or INIT */
+#define TIF_DB_DISABLED		19	/* debug trap disabled for fsyscall */
+#define TIF_FREEZE		20	/* is freezing for suspend */
+#define TIF_RESTORE_RSE		21	/* user RBS is newer than kernel RBS */
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
+#define _TIF_SYSCALL_TRACEAUDIT	(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_MCA_INIT		(1 << TIF_MCA_INIT)
+#define _TIF_DB_DISABLED	(1 << TIF_DB_DISABLED)
+#define _TIF_FREEZE		(1 << TIF_FREEZE)
+#define _TIF_RESTORE_RSE	(1 << TIF_RESTORE_RSE)
+
+/* "work to do on user-return" bits */
+#define TIF_ALLWORK_MASK	(_TIF_SIGPENDING|_TIF_NOTIFY_RESUME|_TIF_SYSCALL_AUDIT|\
+				 _TIF_NEED_RESCHED|_TIF_SYSCALL_TRACE)
+/* like TIF_ALLWORK_BITS but sans TIF_SYSCALL_TRACE or TIF_SYSCALL_AUDIT */
+#define TIF_WORK_MASK		(TIF_ALLWORK_MASK&~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT))
+
+#define TS_POLLING		1 	/* true if in idle loop and not sleeping */
+#define TS_RESTORE_SIGMASK	2	/* restore signal mask in do_signal() */
+
+#define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK	1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->status |= TS_RESTORE_SIGMASK;
+	set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif	/* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_THREAD_INFO_H */
diff --git a/arch/ia64/include/asm/timex.h b/arch/ia64/include/asm/timex.h
new file mode 100644
index 000000000000..05a6baf8a472
--- /dev/null
+++ b/arch/ia64/include/asm/timex.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_IA64_TIMEX_H
+#define _ASM_IA64_TIMEX_H
+
+/*
+ * Copyright (C) 1998-2001, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * 2001/01/18 davidm	Removed CLOCK_TICK_RATE.  It makes no sense on IA-64.
+ *			Also removed cacheflush_time as it's entirely unused.
+ */
+
+#include <asm/intrinsics.h>
+#include <asm/processor.h>
+
+typedef unsigned long cycles_t;
+
+extern void (*ia64_udelay)(unsigned long usecs);
+
+/*
+ * For performance reasons, we don't want to define CLOCK_TICK_TRATE as
+ * local_cpu_data->itc_rate.  Fortunately, we don't have to, either: according to George
+ * Anzinger, 1/CLOCK_TICK_RATE is taken as the resolution of the timer clock.  The time
+ * calculation assumes that you will use enough of these so that your tick size <= 1/HZ.
+ * If the calculation shows that your CLOCK_TICK_RATE can not supply exactly 1/HZ ticks,
+ * the actual value is calculated and used to update the wall clock each jiffie.  Setting
+ * the CLOCK_TICK_RATE to x*HZ insures that the calculation will find no errors.  Hence we
+ * pick a multiple of HZ which gives us a (totally virtual) CLOCK_TICK_RATE of about
+ * 100MHz.
+ */
+#define CLOCK_TICK_RATE		(HZ * 100000UL)
+
+static inline cycles_t
+get_cycles (void)
+{
+	cycles_t ret;
+
+	ret = ia64_getreg(_IA64_REG_AR_ITC);
+	return ret;
+}
+
+#endif /* _ASM_IA64_TIMEX_H */
diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h
new file mode 100644
index 000000000000..20d8a39680c2
--- /dev/null
+++ b/arch/ia64/include/asm/tlb.h
@@ -0,0 +1,257 @@
+#ifndef _ASM_IA64_TLB_H
+#define _ASM_IA64_TLB_H
+/*
+ * Based on <asm-generic/tlb.h>.
+ *
+ * Copyright (C) 2002-2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+/*
+ * Removing a translation from a page table (including TLB-shootdown) is a four-step
+ * procedure:
+ *
+ *	(1) Flush (virtual) caches --- ensures virtual memory is coherent with kernel memory
+ *	    (this is a no-op on ia64).
+ *	(2) Clear the relevant portions of the page-table
+ *	(3) Flush the TLBs --- ensures that stale content is gone from CPU TLBs
+ *	(4) Release the pages that were freed up in step (2).
+ *
+ * Note that the ordering of these steps is crucial to avoid races on MP machines.
+ *
+ * The Linux kernel defines several platform-specific hooks for TLB-shootdown.  When
+ * unmapping a portion of the virtual address space, these hooks are called according to
+ * the following template:
+ *
+ *	tlb <- tlb_gather_mmu(mm, full_mm_flush);	// start unmap for address space MM
+ *	{
+ *	  for each vma that needs a shootdown do {
+ *	    tlb_start_vma(tlb, vma);
+ *	      for each page-table-entry PTE that needs to be removed do {
+ *		tlb_remove_tlb_entry(tlb, pte, address);
+ *		if (pte refers to a normal page) {
+ *		  tlb_remove_page(tlb, page);
+ *		}
+ *	      }
+ *	    tlb_end_vma(tlb, vma);
+ *	  }
+ *	}
+ *	tlb_finish_mmu(tlb, start, end);	// finish unmap for address space MM
+ */
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+#include <linux/swap.h>
+
+#include <asm/pgalloc.h>
+#include <asm/processor.h>
+#include <asm/tlbflush.h>
+#include <asm/machvec.h>
+
+#ifdef CONFIG_SMP
+# define FREE_PTE_NR		2048
+# define tlb_fast_mode(tlb)	((tlb)->nr == ~0U)
+#else
+# define FREE_PTE_NR		0
+# define tlb_fast_mode(tlb)	(1)
+#endif
+
+struct mmu_gather {
+	struct mm_struct	*mm;
+	unsigned int		nr;		/* == ~0U => fast mode */
+	unsigned char		fullmm;		/* non-zero means full mm flush */
+	unsigned char		need_flush;	/* really unmapped some PTEs? */
+	unsigned long		start_addr;
+	unsigned long		end_addr;
+	struct page 		*pages[FREE_PTE_NR];
+};
+
+struct ia64_tr_entry {
+	u64 ifa;
+	u64 itir;
+	u64 pte;
+	u64 rr;
+}; /*Record for tr entry!*/
+
+extern int ia64_itr_entry(u64 target_mask, u64 va, u64 pte, u64 log_size);
+extern void ia64_ptr_entry(u64 target_mask, int slot);
+
+extern struct ia64_tr_entry __per_cpu_idtrs[NR_CPUS][2][IA64_TR_ALLOC_MAX];
+
+/*
+ region register macros
+*/
+#define RR_TO_VE(val)   (((val) >> 0) & 0x0000000000000001)
+#define RR_VE(val)	(((val) & 0x0000000000000001) << 0)
+#define RR_VE_MASK	0x0000000000000001L
+#define RR_VE_SHIFT	0
+#define RR_TO_PS(val)	(((val) >> 2) & 0x000000000000003f)
+#define RR_PS(val)	(((val) & 0x000000000000003f) << 2)
+#define RR_PS_MASK	0x00000000000000fcL
+#define RR_PS_SHIFT	2
+#define RR_RID_MASK	0x00000000ffffff00L
+#define RR_TO_RID(val) 	((val >> 8) & 0xffffff)
+
+/* Users of the generic TLB shootdown code must declare this storage space. */
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+/*
+ * Flush the TLB for address range START to END and, if not in fast mode, release the
+ * freed pages that where gathered up to this point.
+ */
+static inline void
+ia64_tlb_flush_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	unsigned int nr;
+
+	if (!tlb->need_flush)
+		return;
+	tlb->need_flush = 0;
+
+	if (tlb->fullmm) {
+		/*
+		 * Tearing down the entire address space.  This happens both as a result
+		 * of exit() and execve().  The latter case necessitates the call to
+		 * flush_tlb_mm() here.
+		 */
+		flush_tlb_mm(tlb->mm);
+	} else if (unlikely (end - start >= 1024*1024*1024*1024UL
+			     || REGION_NUMBER(start) != REGION_NUMBER(end - 1)))
+	{
+		/*
+		 * If we flush more than a tera-byte or across regions, we're probably
+		 * better off just flushing the entire TLB(s).  This should be very rare
+		 * and is not worth optimizing for.
+		 */
+		flush_tlb_all();
+	} else {
+		/*
+		 * XXX fix me: flush_tlb_range() should take an mm pointer instead of a
+		 * vma pointer.
+		 */
+		struct vm_area_struct vma;
+
+		vma.vm_mm = tlb->mm;
+		/* flush the address range from the tlb: */
+		flush_tlb_range(&vma, start, end);
+		/* now flush the virt. page-table area mapping the address range: */
+		flush_tlb_range(&vma, ia64_thash(start), ia64_thash(end));
+	}
+
+	/* lastly, release the freed pages */
+	nr = tlb->nr;
+	if (!tlb_fast_mode(tlb)) {
+		unsigned long i;
+		tlb->nr = 0;
+		tlb->start_addr = ~0UL;
+		for (i = 0; i < nr; ++i)
+			free_page_and_swap_cache(tlb->pages[i]);
+	}
+}
+
+/*
+ * Return a pointer to an initialized struct mmu_gather.
+ */
+static inline struct mmu_gather *
+tlb_gather_mmu (struct mm_struct *mm, unsigned int full_mm_flush)
+{
+	struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
+
+	tlb->mm = mm;
+	/*
+	 * Use fast mode if only 1 CPU is online.
+	 *
+	 * It would be tempting to turn on fast-mode for full_mm_flush as well.  But this
+	 * doesn't work because of speculative accesses and software prefetching: the page
+	 * table of "mm" may (and usually is) the currently active page table and even
+	 * though the kernel won't do any user-space accesses during the TLB shoot down, a
+	 * compiler might use speculation or lfetch.fault on what happens to be a valid
+	 * user-space address.  This in turn could trigger a TLB miss fault (or a VHPT
+	 * walk) and re-insert a TLB entry we just removed.  Slow mode avoids such
+	 * problems.  (We could make fast-mode work by switching the current task to a
+	 * different "mm" during the shootdown.) --davidm 08/02/2002
+	 */
+	tlb->nr = (num_online_cpus() == 1) ? ~0U : 0;
+	tlb->fullmm = full_mm_flush;
+	tlb->start_addr = ~0UL;
+	return tlb;
+}
+
+/*
+ * Called at the end of the shootdown operation to free up any resources that were
+ * collected.
+ */
+static inline void
+tlb_finish_mmu (struct mmu_gather *tlb, unsigned long start, unsigned long end)
+{
+	/*
+	 * Note: tlb->nr may be 0 at this point, so we can't rely on tlb->start_addr and
+	 * tlb->end_addr.
+	 */
+	ia64_tlb_flush_mmu(tlb, start, end);
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+
+	put_cpu_var(mmu_gathers);
+}
+
+/*
+ * Logically, this routine frees PAGE.  On MP machines, the actual freeing of the page
+ * must be delayed until after the TLB has been flushed (see comments at the beginning of
+ * this file).
+ */
+static inline void
+tlb_remove_page (struct mmu_gather *tlb, struct page *page)
+{
+	tlb->need_flush = 1;
+
+	if (tlb_fast_mode(tlb)) {
+		free_page_and_swap_cache(page);
+		return;
+	}
+	tlb->pages[tlb->nr++] = page;
+	if (tlb->nr >= FREE_PTE_NR)
+		ia64_tlb_flush_mmu(tlb, tlb->start_addr, tlb->end_addr);
+}
+
+/*
+ * Remove TLB entry for PTE mapped at virtual address ADDRESS.  This is called for any
+ * PTE, not just those pointing to (normal) physical memory.
+ */
+static inline void
+__tlb_remove_tlb_entry (struct mmu_gather *tlb, pte_t *ptep, unsigned long address)
+{
+	if (tlb->start_addr == ~0UL)
+		tlb->start_addr = address;
+	tlb->end_addr = address + PAGE_SIZE;
+}
+
+#define tlb_migrate_finish(mm)	platform_tlb_migrate_finish(mm)
+
+#define tlb_start_vma(tlb, vma)			do { } while (0)
+#define tlb_end_vma(tlb, vma)			do { } while (0)
+
+#define tlb_remove_tlb_entry(tlb, ptep, addr)		\
+do {							\
+	tlb->need_flush = 1;				\
+	__tlb_remove_tlb_entry(tlb, ptep, addr);	\
+} while (0)
+
+#define pte_free_tlb(tlb, ptep)				\
+do {							\
+	tlb->need_flush = 1;				\
+	__pte_free_tlb(tlb, ptep);			\
+} while (0)
+
+#define pmd_free_tlb(tlb, ptep)				\
+do {							\
+	tlb->need_flush = 1;				\
+	__pmd_free_tlb(tlb, ptep);			\
+} while (0)
+
+#define pud_free_tlb(tlb, pudp)				\
+do {							\
+	tlb->need_flush = 1;				\
+	__pud_free_tlb(tlb, pudp);			\
+} while (0)
+
+#endif /* _ASM_IA64_TLB_H */
diff --git a/arch/ia64/include/asm/tlbflush.h b/arch/ia64/include/asm/tlbflush.h
new file mode 100644
index 000000000000..3be25dfed164
--- /dev/null
+++ b/arch/ia64/include/asm/tlbflush.h
@@ -0,0 +1,102 @@
+#ifndef _ASM_IA64_TLBFLUSH_H
+#define _ASM_IA64_TLBFLUSH_H
+
+/*
+ * Copyright (C) 2002 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+
+#include <linux/mm.h>
+
+#include <asm/intrinsics.h>
+#include <asm/mmu_context.h>
+#include <asm/page.h>
+
+/*
+ * Now for some TLB flushing routines.  This is the kind of stuff that
+ * can be very expensive, so try to avoid them whenever possible.
+ */
+extern void setup_ptcg_sem(int max_purges, int from_palo);
+
+/*
+ * Flush everything (kernel mapping may also have changed due to
+ * vmalloc/vfree).
+ */
+extern void local_flush_tlb_all (void);
+
+#ifdef CONFIG_SMP
+  extern void smp_flush_tlb_all (void);
+  extern void smp_flush_tlb_mm (struct mm_struct *mm);
+  extern void smp_flush_tlb_cpumask (cpumask_t xcpumask);
+# define flush_tlb_all()	smp_flush_tlb_all()
+#else
+# define flush_tlb_all()	local_flush_tlb_all()
+# define smp_flush_tlb_cpumask(m) local_flush_tlb_all()
+#endif
+
+static inline void
+local_finish_flush_tlb_mm (struct mm_struct *mm)
+{
+	if (mm == current->active_mm)
+		activate_context(mm);
+}
+
+/*
+ * Flush a specified user mapping.  This is called, e.g., as a result of fork() and
+ * exit().  fork() ends up here because the copy-on-write mechanism needs to write-protect
+ * the PTEs of the parent task.
+ */
+static inline void
+flush_tlb_mm (struct mm_struct *mm)
+{
+	if (!mm)
+		return;
+
+	set_bit(mm->context, ia64_ctx.flushmap);
+	mm->context = 0;
+
+	if (atomic_read(&mm->mm_users) == 0)
+		return;		/* happens as a result of exit_mmap() */
+
+#ifdef CONFIG_SMP
+	smp_flush_tlb_mm(mm);
+#else
+	local_finish_flush_tlb_mm(mm);
+#endif
+}
+
+extern void flush_tlb_range (struct vm_area_struct *vma, unsigned long start, unsigned long end);
+
+/*
+ * Page-granular tlb flush.
+ */
+static inline void
+flush_tlb_page (struct vm_area_struct *vma, unsigned long addr)
+{
+#ifdef CONFIG_SMP
+	flush_tlb_range(vma, (addr & PAGE_MASK), (addr & PAGE_MASK) + PAGE_SIZE);
+#else
+	if (vma->vm_mm == current->active_mm)
+		ia64_ptcl(addr, (PAGE_SHIFT << 2));
+	else
+		vma->vm_mm->context = 0;
+#endif
+}
+
+/*
+ * Flush the local TLB. Invoked from another cpu using an IPI.
+ */
+#ifdef CONFIG_SMP
+void smp_local_flush_tlb(void);
+#else
+#define smp_local_flush_tlb()
+#endif
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+	flush_tlb_all();	/* XXX fix me */
+}
+
+#endif /* _ASM_IA64_TLBFLUSH_H */
diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h
new file mode 100644
index 000000000000..35bcb641c9e5
--- /dev/null
+++ b/arch/ia64/include/asm/topology.h
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2002, Erich Focht, NEC
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef _ASM_IA64_TOPOLOGY_H
+#define _ASM_IA64_TOPOLOGY_H
+
+#include <asm/acpi.h>
+#include <asm/numa.h>
+#include <asm/smp.h>
+
+#ifdef CONFIG_NUMA
+
+/* Nodes w/o CPUs are preferred for memory allocations, see build_zonelists */
+#define PENALTY_FOR_NODE_WITH_CPUS 255
+
+/*
+ * Distance above which we begin to use zone reclaim
+ */
+#define RECLAIM_DISTANCE 15
+
+/*
+ * Returns the number of the node containing CPU 'cpu'
+ */
+#define cpu_to_node(cpu) (int)(cpu_to_node_map[cpu])
+
+/*
+ * Returns a bitmask of CPUs on Node 'node'.
+ */
+#define node_to_cpumask(node) (node_to_cpu_mask[node])
+
+/*
+ * Returns the number of the node containing Node 'nid'.
+ * Not implemented here. Multi-level hierarchies detected with
+ * the help of node_distance().
+ */
+#define parent_node(nid) (nid)
+
+/*
+ * Returns the number of the first CPU on Node 'node'.
+ */
+#define node_to_first_cpu(node) (first_cpu(node_to_cpumask(node)))
+
+/*
+ * Determines the node for a given pci bus
+ */
+#define pcibus_to_node(bus) PCI_CONTROLLER(bus)->node
+
+void build_cpu_to_node_map(void);
+
+#define SD_CPU_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.child			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 1,			\
+	.max_interval		= 4,			\
+	.busy_factor		= 64,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 2,			\
+	.busy_idx		= 2,			\
+	.idle_idx		= 1,			\
+	.newidle_idx		= 2,			\
+	.wake_idx		= 1,			\
+	.forkexec_idx		= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_NEWIDLE	\
+				| SD_BALANCE_EXEC	\
+				| SD_WAKE_AFFINE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+
+/* sched_domains SD_NODE_INIT for IA64 NUMA machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.child			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 8,			\
+	.max_interval		= 8*(min(num_online_cpus(), 32)), \
+	.busy_factor		= 64,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 2,			\
+	.busy_idx		= 3,			\
+	.idle_idx		= 2,			\
+	.newidle_idx		= 2,			\
+	.wake_idx		= 1,			\
+	.forkexec_idx		= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_FORK	\
+				| SD_SERIALIZE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 64,			\
+	.nr_balance_failed	= 0,			\
+}
+
+#endif /* CONFIG_NUMA */
+
+#ifdef CONFIG_SMP
+#define topology_physical_package_id(cpu)	(cpu_data(cpu)->socket_id)
+#define topology_core_id(cpu)			(cpu_data(cpu)->core_id)
+#define topology_core_siblings(cpu)		(cpu_core_map[cpu])
+#define topology_thread_siblings(cpu)		(per_cpu(cpu_sibling_map, cpu))
+#define smt_capable() 				(smp_num_siblings > 1)
+#endif
+
+extern void arch_fix_phys_package_id(int num, u32 slot);
+
+#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
+					CPU_MASK_ALL : \
+					node_to_cpumask(pcibus_to_node(bus)) \
+				)
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_IA64_TOPOLOGY_H */
diff --git a/arch/ia64/include/asm/types.h b/arch/ia64/include/asm/types.h
new file mode 100644
index 000000000000..e36b3716e718
--- /dev/null
+++ b/arch/ia64/include/asm/types.h
@@ -0,0 +1,46 @@
+#ifndef _ASM_IA64_TYPES_H
+#define _ASM_IA64_TYPES_H
+
+/*
+ * This file is never included by application software unless explicitly requested (e.g.,
+ * via linux/types.h) in which case the application is Linux specific so (user-) name
+ * space pollution is not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ *
+ * Based on <asm-alpha/types.h>.
+ *
+ * Modified 1998-2000, 2002
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <asm-generic/int-l64.h>
+
+#ifdef __ASSEMBLY__
+# define __IA64_UL(x)		(x)
+# define __IA64_UL_CONST(x)	x
+
+# ifdef __KERNEL__
+#  define BITS_PER_LONG 64
+# endif
+
+#else
+# define __IA64_UL(x)		((unsigned long)(x))
+# define __IA64_UL_CONST(x)	x##UL
+
+typedef unsigned int umode_t;
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+# ifdef __KERNEL__
+
+#define BITS_PER_LONG 64
+
+/* DMA addresses are 64-bits wide, in general.  */
+
+typedef u64 dma_addr_t;
+
+# endif /* __KERNEL__ */
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_IA64_TYPES_H */
diff --git a/arch/ia64/include/asm/uaccess.h b/arch/ia64/include/asm/uaccess.h
new file mode 100644
index 000000000000..449c8c0fa2bd
--- /dev/null
+++ b/arch/ia64/include/asm/uaccess.h
@@ -0,0 +1,401 @@
+#ifndef _ASM_IA64_UACCESS_H
+#define _ASM_IA64_UACCESS_H
+
+/*
+ * This file defines various macros to transfer memory areas across
+ * the user/kernel boundary.  This needs to be done carefully because
+ * this code is executed in kernel mode and uses user-specified
+ * addresses.  Thus, we need to be careful not to let the user to
+ * trick us into accessing kernel memory that would normally be
+ * inaccessible.  This code is also fairly performance sensitive,
+ * so we want to spend as little time doing safety checks as
+ * possible.
+ *
+ * To make matters a bit more interesting, these macros sometimes also
+ * called from within the kernel itself, in which case the address
+ * validity check must be skipped.  The get_fs() macro tells us what
+ * to do: if get_fs()==USER_DS, checking is performed, if
+ * get_fs()==KERNEL_DS, checking is bypassed.
+ *
+ * Note that even if the memory area specified by the user is in a
+ * valid address range, it is still possible that we'll get a page
+ * fault while accessing it.  This is handled by filling out an
+ * exception handler fixup entry for each instruction that has the
+ * potential to fault.  When such a fault occurs, the page fault
+ * handler checks to see whether the faulting instruction has a fixup
+ * associated and, if so, sets r8 to -EFAULT and clears r9 to 0 and
+ * then resumes execution at the continuation point.
+ *
+ * Based on <asm-alpha/uaccess.h>.
+ *
+ * Copyright (C) 1998, 1999, 2001-2004 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/page-flags.h>
+#include <linux/mm.h>
+
+#include <asm/intrinsics.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+
+/*
+ * For historical reasons, the following macros are grossly misnamed:
+ */
+#define KERNEL_DS	((mm_segment_t) { ~0UL })		/* cf. access_ok() */
+#define USER_DS		((mm_segment_t) { TASK_SIZE-1 })	/* cf. access_ok() */
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define get_ds()  (KERNEL_DS)
+#define get_fs()  (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b)	((a).seg == (b).seg)
+
+/*
+ * When accessing user memory, we need to make sure the entire area really is in
+ * user-level space.  In order to do this efficiently, we make sure that the page at
+ * address TASK_SIZE is never valid.  We also need to make sure that the address doesn't
+ * point inside the virtually mapped linear page table.
+ */
+#define __access_ok(addr, size, segment)						\
+({											\
+	__chk_user_ptr(addr);								\
+	(likely((unsigned long) (addr) <= (segment).seg)				\
+	 && ((segment).seg == KERNEL_DS.seg						\
+	     || likely(REGION_OFFSET((unsigned long) (addr)) < RGN_MAP_LIMIT)));	\
+})
+#define access_ok(type, addr, size)	__access_ok((addr), (size), get_fs())
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof/typeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define put_user(x, ptr)	__put_user_check((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)), get_fs())
+#define get_user(x, ptr)	__get_user_check((x), (ptr), sizeof(*(ptr)), get_fs())
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the programmer has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x, ptr)	__put_user_nocheck((__typeof__(*(ptr))) (x), (ptr), sizeof(*(ptr)))
+#define __get_user(x, ptr)	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+extern long __put_user_unaligned_unknown (void);
+
+#define __put_user_unaligned(x, ptr)								\
+({												\
+	long __ret;										\
+	switch (sizeof(*(ptr))) {								\
+		case 1: __ret = __put_user((x), (ptr)); break;					\
+		case 2: __ret = (__put_user((x), (u8 __user *)(ptr)))				\
+			| (__put_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break;		\
+		case 4: __ret = (__put_user((x), (u16 __user *)(ptr)))				\
+			| (__put_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break;		\
+		case 8: __ret = (__put_user((x), (u32 __user *)(ptr)))				\
+			| (__put_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break;		\
+		default: __ret = __put_user_unaligned_unknown();				\
+	}											\
+	__ret;											\
+})
+
+extern long __get_user_unaligned_unknown (void);
+
+#define __get_user_unaligned(x, ptr)								\
+({												\
+	long __ret;										\
+	switch (sizeof(*(ptr))) {								\
+		case 1: __ret = __get_user((x), (ptr)); break;					\
+		case 2: __ret = (__get_user((x), (u8 __user *)(ptr)))				\
+			| (__get_user((x) >> 8, ((u8 __user *)(ptr) + 1))); break;		\
+		case 4: __ret = (__get_user((x), (u16 __user *)(ptr)))				\
+			| (__get_user((x) >> 16, ((u16 __user *)(ptr) + 1))); break;		\
+		case 8: __ret = (__get_user((x), (u32 __user *)(ptr)))				\
+			| (__get_user((x) >> 32, ((u32 __user *)(ptr) + 1))); break;		\
+		default: __ret = __get_user_unaligned_unknown();				\
+	}											\
+	__ret;											\
+})
+
+#ifdef ASM_SUPPORTED
+  struct __large_struct { unsigned long buf[100]; };
+# define __m(x) (*(struct __large_struct __user *)(x))
+
+/* We need to declare the __ex_table section before we can use it in .xdata.  */
+asm (".section \"__ex_table\", \"a\"\n\t.previous");
+
+# define __get_user_size(val, addr, n, err)							\
+do {												\
+	register long __gu_r8 asm ("r8") = 0;							\
+	register long __gu_r9 asm ("r9");							\
+	asm ("\n[1:]\tld"#n" %0=%2%P2\t// %0 and %1 get overwritten by exception handler\n"	\
+	     "\t.xdata4 \"__ex_table\", 1b-., 1f-.+4\n"						\
+	     "[1:]"										\
+	     : "=r"(__gu_r9), "=r"(__gu_r8) : "m"(__m(addr)), "1"(__gu_r8));			\
+	(err) = __gu_r8;									\
+	(val) = __gu_r9;									\
+} while (0)
+
+/*
+ * The "__put_user_size()" macro tells gcc it reads from memory instead of writing it.  This
+ * is because they do not write to any memory gcc knows about, so there are no aliasing
+ * issues.
+ */
+# define __put_user_size(val, addr, n, err)							\
+do {												\
+	register long __pu_r8 asm ("r8") = 0;							\
+	asm volatile ("\n[1:]\tst"#n" %1=%r2%P1\t// %0 gets overwritten by exception handler\n"	\
+		      "\t.xdata4 \"__ex_table\", 1b-., 1f-.\n"					\
+		      "[1:]"									\
+		      : "=r"(__pu_r8) : "m"(__m(addr)), "rO"(val), "0"(__pu_r8));		\
+	(err) = __pu_r8;									\
+} while (0)
+
+#else /* !ASM_SUPPORTED */
+# define RELOC_TYPE	2	/* ip-rel */
+# define __get_user_size(val, addr, n, err)				\
+do {									\
+	__ld_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE);	\
+	(err) = ia64_getreg(_IA64_REG_R8);				\
+	(val) = ia64_getreg(_IA64_REG_R9);				\
+} while (0)
+# define __put_user_size(val, addr, n, err)							\
+do {												\
+	__st_user("__ex_table", (unsigned long) addr, n, RELOC_TYPE, (unsigned long) (val));	\
+	(err) = ia64_getreg(_IA64_REG_R8);							\
+} while (0)
+#endif /* !ASM_SUPPORTED */
+
+extern void __get_user_unknown (void);
+
+/*
+ * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which
+ * could clobber r8 and r9 (among others).  Thus, be careful not to evaluate it while
+ * using r8/r9.
+ */
+#define __do_get_user(check, x, ptr, size, segment)					\
+({											\
+	const __typeof__(*(ptr)) __user *__gu_ptr = (ptr);				\
+	__typeof__ (size) __gu_size = (size);						\
+	long __gu_err = -EFAULT;							\
+	unsigned long __gu_val = 0;							\
+	if (!check || __access_ok(__gu_ptr, size, segment))				\
+		switch (__gu_size) {							\
+		      case 1: __get_user_size(__gu_val, __gu_ptr, 1, __gu_err); break;	\
+		      case 2: __get_user_size(__gu_val, __gu_ptr, 2, __gu_err); break;	\
+		      case 4: __get_user_size(__gu_val, __gu_ptr, 4, __gu_err); break;	\
+		      case 8: __get_user_size(__gu_val, __gu_ptr, 8, __gu_err); break;	\
+		      default: __get_user_unknown(); break;				\
+		}									\
+	(x) = (__typeof__(*(__gu_ptr))) __gu_val;					\
+	__gu_err;									\
+})
+
+#define __get_user_nocheck(x, ptr, size)	__do_get_user(0, x, ptr, size, KERNEL_DS)
+#define __get_user_check(x, ptr, size, segment)	__do_get_user(1, x, ptr, size, segment)
+
+extern void __put_user_unknown (void);
+
+/*
+ * Evaluating arguments X, PTR, SIZE, and SEGMENT may involve subroutine-calls, which
+ * could clobber r8 (among others).  Thus, be careful not to evaluate them while using r8.
+ */
+#define __do_put_user(check, x, ptr, size, segment)					\
+({											\
+	__typeof__ (x) __pu_x = (x);							\
+	__typeof__ (*(ptr)) __user *__pu_ptr = (ptr);					\
+	__typeof__ (size) __pu_size = (size);						\
+	long __pu_err = -EFAULT;							\
+											\
+	if (!check || __access_ok(__pu_ptr, __pu_size, segment))			\
+		switch (__pu_size) {							\
+		      case 1: __put_user_size(__pu_x, __pu_ptr, 1, __pu_err); break;	\
+		      case 2: __put_user_size(__pu_x, __pu_ptr, 2, __pu_err); break;	\
+		      case 4: __put_user_size(__pu_x, __pu_ptr, 4, __pu_err); break;	\
+		      case 8: __put_user_size(__pu_x, __pu_ptr, 8, __pu_err); break;	\
+		      default: __put_user_unknown(); break;				\
+		}									\
+	__pu_err;									\
+})
+
+#define __put_user_nocheck(x, ptr, size)	__do_put_user(0, x, ptr, size, KERNEL_DS)
+#define __put_user_check(x, ptr, size, segment)	__do_put_user(1, x, ptr, size, segment)
+
+/*
+ * Complex access routines
+ */
+extern unsigned long __must_check __copy_user (void __user *to, const void __user *from,
+					       unsigned long count);
+
+static inline unsigned long
+__copy_to_user (void __user *to, const void *from, unsigned long count)
+{
+	return __copy_user(to, (__force void __user *) from, count);
+}
+
+static inline unsigned long
+__copy_from_user (void *to, const void __user *from, unsigned long count)
+{
+	return __copy_user((__force void __user *) to, from, count);
+}
+
+#define __copy_to_user_inatomic		__copy_to_user
+#define __copy_from_user_inatomic	__copy_from_user
+#define copy_to_user(to, from, n)							\
+({											\
+	void __user *__cu_to = (to);							\
+	const void *__cu_from = (from);							\
+	long __cu_len = (n);								\
+											\
+	if (__access_ok(__cu_to, __cu_len, get_fs()))					\
+		__cu_len = __copy_user(__cu_to, (__force void __user *) __cu_from, __cu_len);	\
+	__cu_len;									\
+})
+
+#define copy_from_user(to, from, n)							\
+({											\
+	void *__cu_to = (to);								\
+	const void __user *__cu_from = (from);						\
+	long __cu_len = (n);								\
+											\
+	__chk_user_ptr(__cu_from);							\
+	if (__access_ok(__cu_from, __cu_len, get_fs()))					\
+		__cu_len = __copy_user((__force void __user *) __cu_to, __cu_from, __cu_len);	\
+	__cu_len;									\
+})
+
+#define __copy_in_user(to, from, size)	__copy_user((to), (from), (size))
+
+static inline unsigned long
+copy_in_user (void __user *to, const void __user *from, unsigned long n)
+{
+	if (likely(access_ok(VERIFY_READ, from, n) && access_ok(VERIFY_WRITE, to, n)))
+		n = __copy_user(to, from, n);
+	return n;
+}
+
+extern unsigned long __do_clear_user (void __user *, unsigned long);
+
+#define __clear_user(to, n)		__do_clear_user(to, n)
+
+#define clear_user(to, n)					\
+({								\
+	unsigned long __cu_len = (n);				\
+	if (__access_ok(to, __cu_len, get_fs()))		\
+		__cu_len = __do_clear_user(to, __cu_len);	\
+	__cu_len;						\
+})
+
+
+/*
+ * Returns: -EFAULT if exception before terminator, N if the entire buffer filled, else
+ * strlen.
+ */
+extern long __must_check __strncpy_from_user (char *to, const char __user *from, long to_len);
+
+#define strncpy_from_user(to, from, n)					\
+({									\
+	const char __user * __sfu_from = (from);			\
+	long __sfu_ret = -EFAULT;					\
+	if (__access_ok(__sfu_from, 0, get_fs()))			\
+		__sfu_ret = __strncpy_from_user((to), __sfu_from, (n));	\
+	__sfu_ret;							\
+})
+
+/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
+extern unsigned long __strlen_user (const char __user *);
+
+#define strlen_user(str)				\
+({							\
+	const char __user *__su_str = (str);		\
+	unsigned long __su_ret = 0;			\
+	if (__access_ok(__su_str, 0, get_fs()))		\
+		__su_ret = __strlen_user(__su_str);	\
+	__su_ret;					\
+})
+
+/*
+ * Returns: 0 if exception before NUL or reaching the supplied limit
+ * (N), a value greater than N if the limit would be exceeded, else
+ * strlen.
+ */
+extern unsigned long __strnlen_user (const char __user *, long);
+
+#define strnlen_user(str, len)					\
+({								\
+	const char __user *__su_str = (str);			\
+	unsigned long __su_ret = 0;				\
+	if (__access_ok(__su_str, 0, get_fs()))			\
+		__su_ret = __strnlen_user(__su_str, len);	\
+	__su_ret;						\
+})
+
+/* Generic code can't deal with the location-relative format that we use for compactness.  */
+#define ARCH_HAS_SORT_EXTABLE
+#define ARCH_HAS_SEARCH_EXTABLE
+
+struct exception_table_entry {
+	int addr;	/* location-relative address of insn this fixup is for */
+	int cont;	/* location-relative continuation addr.; if bit 2 is set, r9 is set to 0 */
+};
+
+extern void ia64_handle_exception (struct pt_regs *regs, const struct exception_table_entry *e);
+extern const struct exception_table_entry *search_exception_tables (unsigned long addr);
+
+static inline int
+ia64_done_with_exception (struct pt_regs *regs)
+{
+	const struct exception_table_entry *e;
+	e = search_exception_tables(regs->cr_iip + ia64_psr(regs)->ri);
+	if (e) {
+		ia64_handle_exception(regs, e);
+		return 1;
+	}
+	return 0;
+}
+
+#define ARCH_HAS_TRANSLATE_MEM_PTR	1
+static __inline__ char *
+xlate_dev_mem_ptr (unsigned long p)
+{
+	struct page *page;
+	char * ptr;
+
+	page = pfn_to_page(p >> PAGE_SHIFT);
+	if (PageUncached(page))
+		ptr = (char *)p + __IA64_UNCACHED_OFFSET;
+	else
+		ptr = __va(p);
+
+	return ptr;
+}
+
+/*
+ * Convert a virtual cached kernel memory pointer to an uncached pointer
+ */
+static __inline__ char *
+xlate_dev_kmem_ptr (char * p)
+{
+	struct page *page;
+	char * ptr;
+
+	page = virt_to_page((unsigned long)p);
+	if (PageUncached(page))
+		ptr = (char *)__pa(p) + __IA64_UNCACHED_OFFSET;
+	else
+		ptr = p;
+
+	return ptr;
+}
+
+#endif /* _ASM_IA64_UACCESS_H */
diff --git a/arch/ia64/include/asm/ucontext.h b/arch/ia64/include/asm/ucontext.h
new file mode 100644
index 000000000000..bf573dc8ca6a
--- /dev/null
+++ b/arch/ia64/include/asm/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_IA64_UCONTEXT_H
+#define _ASM_IA64_UCONTEXT_H
+
+struct ucontext {
+	struct sigcontext uc_mcontext;
+};
+
+#define uc_link		uc_mcontext.sc_gr[0]	/* wrong type; nobody cares */
+#define uc_sigmask	uc_mcontext.sc_sigmask
+#define uc_stack	uc_mcontext.sc_stack
+
+#endif /* _ASM_IA64_UCONTEXT_H */
diff --git a/arch/ia64/include/asm/unaligned.h b/arch/ia64/include/asm/unaligned.h
new file mode 100644
index 000000000000..7bddc7f58584
--- /dev/null
+++ b/arch/ia64/include/asm/unaligned.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_IA64_UNALIGNED_H
+#define _ASM_IA64_UNALIGNED_H
+
+#include <linux/unaligned/le_struct.h>
+#include <linux/unaligned/be_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned	__get_unaligned_le
+#define put_unaligned	__put_unaligned_le
+
+#endif /* _ASM_IA64_UNALIGNED_H */
diff --git a/arch/ia64/include/asm/uncached.h b/arch/ia64/include/asm/uncached.h
new file mode 100644
index 000000000000..13d7e65ca3cc
--- /dev/null
+++ b/arch/ia64/include/asm/uncached.h
@@ -0,0 +1,12 @@
+/*
+ * Copyright (C) 2001-2008 Silicon Graphics, Inc.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * Prototypes for the uncached page allocator
+ */
+
+extern unsigned long uncached_alloc_page(int starting_nid, int n_pages);
+extern void uncached_free_page(unsigned long uc_addr, int n_pages);
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
new file mode 100644
index 000000000000..d535833aab5e
--- /dev/null
+++ b/arch/ia64/include/asm/unistd.h
@@ -0,0 +1,384 @@
+#ifndef _ASM_IA64_UNISTD_H
+#define _ASM_IA64_UNISTD_H
+
+/*
+ * IA-64 Linux syscall numbers and inline-functions.
+ *
+ * Copyright (C) 1998-2005 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#include <asm/break.h>
+
+#define __BREAK_SYSCALL			__IA64_BREAK_SYSCALL
+
+#define __NR_ni_syscall			1024
+#define __NR_exit			1025
+#define __NR_read			1026
+#define __NR_write			1027
+#define __NR_open			1028
+#define __NR_close			1029
+#define __NR_creat			1030
+#define __NR_link			1031
+#define __NR_unlink			1032
+#define __NR_execve			1033
+#define __NR_chdir			1034
+#define __NR_fchdir			1035
+#define __NR_utimes			1036
+#define __NR_mknod			1037
+#define __NR_chmod			1038
+#define __NR_chown			1039
+#define __NR_lseek			1040
+#define __NR_getpid			1041
+#define __NR_getppid			1042
+#define __NR_mount			1043
+#define __NR_umount			1044
+#define __NR_setuid			1045
+#define __NR_getuid			1046
+#define __NR_geteuid			1047
+#define __NR_ptrace			1048
+#define __NR_access			1049
+#define __NR_sync			1050
+#define __NR_fsync			1051
+#define __NR_fdatasync			1052
+#define __NR_kill			1053
+#define __NR_rename			1054
+#define __NR_mkdir			1055
+#define __NR_rmdir			1056
+#define __NR_dup			1057
+#define __NR_pipe			1058
+#define __NR_times			1059
+#define __NR_brk			1060
+#define __NR_setgid			1061
+#define __NR_getgid			1062
+#define __NR_getegid			1063
+#define __NR_acct			1064
+#define __NR_ioctl			1065
+#define __NR_fcntl			1066
+#define __NR_umask			1067
+#define __NR_chroot			1068
+#define __NR_ustat			1069
+#define __NR_dup2			1070
+#define __NR_setreuid			1071
+#define __NR_setregid			1072
+#define __NR_getresuid			1073
+#define __NR_setresuid			1074
+#define __NR_getresgid			1075
+#define __NR_setresgid			1076
+#define __NR_getgroups			1077
+#define __NR_setgroups			1078
+#define __NR_getpgid			1079
+#define __NR_setpgid			1080
+#define __NR_setsid			1081
+#define __NR_getsid			1082
+#define __NR_sethostname		1083
+#define __NR_setrlimit			1084
+#define __NR_getrlimit			1085
+#define __NR_getrusage			1086
+#define __NR_gettimeofday		1087
+#define __NR_settimeofday		1088
+#define __NR_select			1089
+#define __NR_poll			1090
+#define __NR_symlink			1091
+#define __NR_readlink			1092
+#define __NR_uselib			1093
+#define __NR_swapon			1094
+#define __NR_swapoff			1095
+#define __NR_reboot			1096
+#define __NR_truncate			1097
+#define __NR_ftruncate			1098
+#define __NR_fchmod			1099
+#define __NR_fchown			1100
+#define __NR_getpriority		1101
+#define __NR_setpriority		1102
+#define __NR_statfs			1103
+#define __NR_fstatfs			1104
+#define __NR_gettid			1105
+#define __NR_semget			1106
+#define __NR_semop			1107
+#define __NR_semctl			1108
+#define __NR_msgget			1109
+#define __NR_msgsnd			1110
+#define __NR_msgrcv			1111
+#define __NR_msgctl			1112
+#define __NR_shmget			1113
+#define __NR_shmat			1114
+#define __NR_shmdt			1115
+#define __NR_shmctl			1116
+/* also known as klogctl() in GNU libc: */
+#define __NR_syslog			1117
+#define __NR_setitimer			1118
+#define __NR_getitimer			1119
+/* 1120 was __NR_old_stat */
+/* 1121 was __NR_old_lstat */
+/* 1122 was __NR_old_fstat */
+#define __NR_vhangup			1123
+#define __NR_lchown			1124
+#define __NR_remap_file_pages		1125
+#define __NR_wait4			1126
+#define __NR_sysinfo			1127
+#define __NR_clone			1128
+#define __NR_setdomainname		1129
+#define __NR_uname			1130
+#define __NR_adjtimex			1131
+/* 1132 was __NR_create_module */
+#define __NR_init_module		1133
+#define __NR_delete_module		1134
+/* 1135 was __NR_get_kernel_syms */
+/* 1136 was __NR_query_module */
+#define __NR_quotactl			1137
+#define __NR_bdflush			1138
+#define __NR_sysfs			1139
+#define __NR_personality		1140
+#define __NR_afs_syscall		1141
+#define __NR_setfsuid			1142
+#define __NR_setfsgid			1143
+#define __NR_getdents			1144
+#define __NR_flock			1145
+#define __NR_readv			1146
+#define __NR_writev			1147
+#define __NR_pread64			1148
+#define __NR_pwrite64			1149
+#define __NR__sysctl			1150
+#define __NR_mmap			1151
+#define __NR_munmap			1152
+#define __NR_mlock			1153
+#define __NR_mlockall			1154
+#define __NR_mprotect			1155
+#define __NR_mremap			1156
+#define __NR_msync			1157
+#define __NR_munlock			1158
+#define __NR_munlockall			1159
+#define __NR_sched_getparam		1160
+#define __NR_sched_setparam		1161
+#define __NR_sched_getscheduler		1162
+#define __NR_sched_setscheduler		1163
+#define __NR_sched_yield		1164
+#define __NR_sched_get_priority_max	1165
+#define __NR_sched_get_priority_min	1166
+#define __NR_sched_rr_get_interval	1167
+#define __NR_nanosleep			1168
+#define __NR_nfsservctl			1169
+#define __NR_prctl			1170
+/* 1171 is reserved for backwards compatibility with old __NR_getpagesize */
+#define __NR_mmap2			1172
+#define __NR_pciconfig_read		1173
+#define __NR_pciconfig_write		1174
+#define __NR_perfmonctl			1175
+#define __NR_sigaltstack		1176
+#define __NR_rt_sigaction		1177
+#define __NR_rt_sigpending		1178
+#define __NR_rt_sigprocmask		1179
+#define __NR_rt_sigqueueinfo		1180
+#define __NR_rt_sigreturn		1181
+#define __NR_rt_sigsuspend		1182
+#define __NR_rt_sigtimedwait		1183
+#define __NR_getcwd			1184
+#define __NR_capget			1185
+#define __NR_capset			1186
+#define __NR_sendfile			1187
+#define __NR_getpmsg			1188
+#define __NR_putpmsg			1189
+#define __NR_socket			1190
+#define __NR_bind			1191
+#define __NR_connect			1192
+#define __NR_listen			1193
+#define __NR_accept			1194
+#define __NR_getsockname		1195
+#define __NR_getpeername		1196
+#define __NR_socketpair			1197
+#define __NR_send			1198
+#define __NR_sendto			1199
+#define __NR_recv			1200
+#define __NR_recvfrom			1201
+#define __NR_shutdown			1202
+#define __NR_setsockopt			1203
+#define __NR_getsockopt			1204
+#define __NR_sendmsg			1205
+#define __NR_recvmsg			1206
+#define __NR_pivot_root			1207
+#define __NR_mincore			1208
+#define __NR_madvise			1209
+#define __NR_stat			1210
+#define __NR_lstat			1211
+#define __NR_fstat			1212
+#define __NR_clone2			1213
+#define __NR_getdents64			1214
+#define __NR_getunwind			1215
+#define __NR_readahead			1216
+#define __NR_setxattr			1217
+#define __NR_lsetxattr			1218
+#define __NR_fsetxattr			1219
+#define __NR_getxattr			1220
+#define __NR_lgetxattr			1221
+#define __NR_fgetxattr			1222
+#define __NR_listxattr			1223
+#define __NR_llistxattr			1224
+#define __NR_flistxattr			1225
+#define __NR_removexattr		1226
+#define __NR_lremovexattr		1227
+#define __NR_fremovexattr		1228
+#define __NR_tkill			1229
+#define __NR_futex			1230
+#define __NR_sched_setaffinity		1231
+#define __NR_sched_getaffinity		1232
+#define __NR_set_tid_address		1233
+#define __NR_fadvise64			1234
+#define __NR_tgkill			1235
+#define __NR_exit_group			1236
+#define __NR_lookup_dcookie		1237
+#define __NR_io_setup			1238
+#define __NR_io_destroy			1239
+#define __NR_io_getevents		1240
+#define __NR_io_submit			1241
+#define __NR_io_cancel			1242
+#define __NR_epoll_create		1243
+#define __NR_epoll_ctl			1244
+#define __NR_epoll_wait			1245
+#define __NR_restart_syscall		1246
+#define __NR_semtimedop			1247
+#define __NR_timer_create		1248
+#define __NR_timer_settime		1249
+#define __NR_timer_gettime		1250
+#define __NR_timer_getoverrun		1251
+#define __NR_timer_delete		1252
+#define __NR_clock_settime		1253
+#define __NR_clock_gettime		1254
+#define __NR_clock_getres		1255
+#define __NR_clock_nanosleep		1256
+#define __NR_fstatfs64			1257
+#define __NR_statfs64			1258
+#define __NR_mbind			1259
+#define __NR_get_mempolicy		1260
+#define __NR_set_mempolicy		1261
+#define __NR_mq_open			1262
+#define __NR_mq_unlink			1263
+#define __NR_mq_timedsend		1264
+#define __NR_mq_timedreceive		1265
+#define __NR_mq_notify			1266
+#define __NR_mq_getsetattr		1267
+#define __NR_kexec_load			1268
+#define __NR_vserver			1269
+#define __NR_waitid			1270
+#define __NR_add_key			1271
+#define __NR_request_key		1272
+#define __NR_keyctl			1273
+#define __NR_ioprio_set			1274
+#define __NR_ioprio_get			1275
+#define __NR_move_pages			1276
+#define __NR_inotify_init		1277
+#define __NR_inotify_add_watch		1278
+#define __NR_inotify_rm_watch		1279
+#define __NR_migrate_pages		1280
+#define __NR_openat			1281
+#define __NR_mkdirat			1282
+#define __NR_mknodat			1283
+#define __NR_fchownat			1284
+#define __NR_futimesat			1285
+#define __NR_newfstatat			1286
+#define __NR_unlinkat			1287
+#define __NR_renameat			1288
+#define __NR_linkat			1289
+#define __NR_symlinkat			1290
+#define __NR_readlinkat			1291
+#define __NR_fchmodat			1292
+#define __NR_faccessat			1293
+#define __NR_pselect6			1294
+#define __NR_ppoll			1295
+#define __NR_unshare			1296
+#define __NR_splice			1297
+#define __NR_set_robust_list		1298
+#define __NR_get_robust_list		1299
+#define __NR_sync_file_range		1300
+#define __NR_tee			1301
+#define __NR_vmsplice			1302
+#define __NR_fallocate			1303
+#define __NR_getcpu			1304
+#define __NR_epoll_pwait		1305
+#define __NR_utimensat			1306
+#define __NR_signalfd			1307
+#define __NR_timerfd			1308
+#define __NR_eventfd			1309
+#define __NR_timerfd_create		1310
+#define __NR_timerfd_settime		1311
+#define __NR_timerfd_gettime		1312
+#define __NR_signalfd4			1313
+#define __NR_eventfd2			1314
+#define __NR_epoll_create1		1315
+#define __NR_dup3			1316
+#define __NR_pipe2			1317
+#define __NR_inotify_init1		1318
+
+#ifdef __KERNEL__
+
+
+#define NR_syscalls			295 /* length of syscall table */
+
+/*
+ * The following defines stop scripts/checksyscalls.sh from complaining about
+ * unimplemented system calls.  Glibc provides for each of these by using
+ * more modern equivalent system calls.
+ */
+#define __IGNORE_fork		/* clone() */
+#define __IGNORE_time		/* gettimeofday() */
+#define __IGNORE_alarm		/* setitimer(ITIMER_REAL, ... */
+#define __IGNORE_pause		/* rt_sigprocmask(), rt_sigsuspend() */
+#define __IGNORE_utime		/* utimes() */
+#define __IGNORE_getpgrp	/* getpgid() */
+#define __IGNORE_vfork		/* clone() */
+
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+#ifdef CONFIG_IA32_SUPPORT
+# define __ARCH_WANT_SYS_FADVISE64
+# define __ARCH_WANT_SYS_GETPGRP
+# define __ARCH_WANT_SYS_LLSEEK
+# define __ARCH_WANT_SYS_NICE
+# define __ARCH_WANT_SYS_OLD_GETRLIMIT
+# define __ARCH_WANT_SYS_OLDUMOUNT
+# define __ARCH_WANT_SYS_SIGPENDING
+# define __ARCH_WANT_SYS_SIGPROCMASK
+# define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+# define __ARCH_WANT_COMPAT_SYS_TIME
+#endif
+
+#if !defined(__ASSEMBLY__) && !defined(ASSEMBLER)
+
+#include <linux/types.h>
+#include <linux/linkage.h>
+#include <linux/compiler.h>
+
+extern long __ia64_syscall (long a0, long a1, long a2, long a3, long a4, long nr);
+
+asmlinkage unsigned long sys_mmap(
+				unsigned long addr, unsigned long len,
+				int prot, int flags,
+				int fd, long off);
+asmlinkage unsigned long sys_mmap2(
+				unsigned long addr, unsigned long len,
+				int prot, int flags,
+				int fd, long pgoff);
+struct pt_regs;
+struct sigaction;
+long sys_execve(char __user *filename, char __user * __user *argv,
+			   char __user * __user *envp, struct pt_regs *regs);
+asmlinkage long sys_pipe(void);
+asmlinkage long sys_rt_sigaction(int sig,
+				 const struct sigaction __user *act,
+				 struct sigaction __user *oact,
+				 size_t sigsetsize);
+
+/*
+ * "Conditional" syscalls
+ *
+ * Note, this macro can only be used in the file which defines sys_ni_syscall, i.e., in
+ * kernel/sys_ni.c.  This version causes warnings because the declaration isn't a
+ * proper prototype, but we can't use __typeof__ either, because not all cond_syscall()
+ * declarations have prototypes at the moment.
+ */
+#define cond_syscall(x) asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall")))
+
+#endif /* !__ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_IA64_UNISTD_H */
diff --git a/arch/ia64/include/asm/unwind.h b/arch/ia64/include/asm/unwind.h
new file mode 100644
index 000000000000..1af3875f1a57
--- /dev/null
+++ b/arch/ia64/include/asm/unwind.h
@@ -0,0 +1,233 @@
+#ifndef _ASM_IA64_UNWIND_H
+#define _ASM_IA64_UNWIND_H
+
+/*
+ * Copyright (C) 1999-2000, 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * A simple API for unwinding kernel stacks.  This is used for
+ * debugging and error reporting purposes.  The kernel doesn't need
+ * full-blown stack unwinding with all the bells and whitles, so there
+ * is not much point in implementing the full IA-64 unwind API (though
+ * it would of course be possible to implement the kernel API on top
+ * of it).
+ */
+
+struct task_struct;	/* forward declaration */
+struct switch_stack;	/* forward declaration */
+
+enum unw_application_register {
+	UNW_AR_BSP,
+	UNW_AR_BSPSTORE,
+	UNW_AR_PFS,
+	UNW_AR_RNAT,
+	UNW_AR_UNAT,
+	UNW_AR_LC,
+	UNW_AR_EC,
+	UNW_AR_FPSR,
+	UNW_AR_RSC,
+	UNW_AR_CCV,
+	UNW_AR_CSD,
+	UNW_AR_SSD
+};
+
+/*
+ * The following declarations are private to the unwind
+ * implementation:
+ */
+
+struct unw_stack {
+	unsigned long limit;
+	unsigned long top;
+};
+
+#define UNW_FLAG_INTERRUPT_FRAME	(1UL << 0)
+
+/*
+ * No user of this module should every access this structure directly
+ * as it is subject to change.  It is declared here solely so we can
+ * use automatic variables.
+ */
+struct unw_frame_info {
+	struct unw_stack regstk;
+	struct unw_stack memstk;
+	unsigned int flags;
+	short hint;
+	short prev_script;
+
+	/* current frame info: */
+	unsigned long bsp;		/* backing store pointer value */
+	unsigned long sp;		/* stack pointer value */
+	unsigned long psp;		/* previous sp value */
+	unsigned long ip;		/* instruction pointer value */
+	unsigned long pr;		/* current predicate values */
+	unsigned long *cfm_loc;		/* cfm save location (or NULL) */
+	unsigned long pt;		/* struct pt_regs location */
+
+	struct task_struct *task;
+	struct switch_stack *sw;
+
+	/* preserved state: */
+	unsigned long *bsp_loc;		/* previous bsp save location */
+	unsigned long *bspstore_loc;
+	unsigned long *pfs_loc;
+	unsigned long *rnat_loc;
+	unsigned long *rp_loc;
+	unsigned long *pri_unat_loc;
+	unsigned long *unat_loc;
+	unsigned long *pr_loc;
+	unsigned long *lc_loc;
+	unsigned long *fpsr_loc;
+	struct unw_ireg {
+		unsigned long *loc;
+		struct unw_ireg_nat {
+			unsigned long type : 3;		/* enum unw_nat_type */
+			signed long off : 61;		/* NaT word is at loc+nat.off */
+		} nat;
+	} r4, r5, r6, r7;
+	unsigned long *b1_loc, *b2_loc, *b3_loc, *b4_loc, *b5_loc;
+	struct ia64_fpreg *f2_loc, *f3_loc, *f4_loc, *f5_loc, *fr_loc[16];
+};
+
+/*
+ * The official API follows below:
+ */
+
+struct unw_table_entry {
+	u64 start_offset;
+	u64 end_offset;
+	u64 info_offset;
+};
+
+/*
+ * Initialize unwind support.
+ */
+extern void unw_init (void);
+
+extern void *unw_add_unwind_table (const char *name, unsigned long segment_base, unsigned long gp,
+				   const void *table_start, const void *table_end);
+
+extern void unw_remove_unwind_table (void *handle);
+
+/*
+ * Prepare to unwind blocked task t.
+ */
+extern void unw_init_from_blocked_task (struct unw_frame_info *info, struct task_struct *t);
+
+extern void unw_init_frame_info (struct unw_frame_info *info, struct task_struct *t,
+				 struct switch_stack *sw);
+
+/*
+ * Prepare to unwind the currently running thread.
+ */
+extern void unw_init_running (void (*callback)(struct unw_frame_info *info, void *arg), void *arg);
+
+/*
+ * Unwind to previous to frame.  Returns 0 if successful, negative
+ * number in case of an error.
+ */
+extern int unw_unwind (struct unw_frame_info *info);
+
+/*
+ * Unwind until the return pointer is in user-land (or until an error
+ * occurs).  Returns 0 if successful, negative number in case of
+ * error.
+ */
+extern int unw_unwind_to_user (struct unw_frame_info *info);
+
+#define unw_is_intr_frame(info)	(((info)->flags & UNW_FLAG_INTERRUPT_FRAME) != 0)
+
+static inline int
+unw_get_ip (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = (info)->ip;
+	return 0;
+}
+
+static inline int
+unw_get_sp (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = (info)->sp;
+	return 0;
+}
+
+static inline int
+unw_get_psp (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = (info)->psp;
+	return 0;
+}
+
+static inline int
+unw_get_bsp (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = (info)->bsp;
+	return 0;
+}
+
+static inline int
+unw_get_cfm (struct unw_frame_info *info, unsigned long *valp)
+{
+	*valp = *(info)->cfm_loc;
+	return 0;
+}
+
+static inline int
+unw_set_cfm (struct unw_frame_info *info, unsigned long val)
+{
+	*(info)->cfm_loc = val;
+	return 0;
+}
+
+static inline int
+unw_get_rp (struct unw_frame_info *info, unsigned long *val)
+{
+	if (!info->rp_loc)
+		return -1;
+	*val = *info->rp_loc;
+	return 0;
+}
+
+extern int unw_access_gr (struct unw_frame_info *, int, unsigned long *, char *, int);
+extern int unw_access_br (struct unw_frame_info *, int, unsigned long *, int);
+extern int unw_access_fr (struct unw_frame_info *, int, struct ia64_fpreg *, int);
+extern int unw_access_ar (struct unw_frame_info *, int, unsigned long *, int);
+extern int unw_access_pr (struct unw_frame_info *, unsigned long *, int);
+
+static inline int
+unw_set_gr (struct unw_frame_info *i, int n, unsigned long v, char nat)
+{
+	return unw_access_gr(i, n, &v, &nat, 1);
+}
+
+static inline int
+unw_set_br (struct unw_frame_info *i, int n, unsigned long v)
+{
+	return unw_access_br(i, n, &v, 1);
+}
+
+static inline int
+unw_set_fr (struct unw_frame_info *i, int n, struct ia64_fpreg v)
+{
+	return unw_access_fr(i, n, &v, 1);
+}
+
+static inline int
+unw_set_ar (struct unw_frame_info *i, int n, unsigned long v)
+{
+	return unw_access_ar(i, n, &v, 1);
+}
+
+static inline int
+unw_set_pr (struct unw_frame_info *i, unsigned long v)
+{
+	return unw_access_pr(i, &v, 1);
+}
+
+#define unw_get_gr(i,n,v,nat)	unw_access_gr(i,n,v,nat,0)
+#define unw_get_br(i,n,v)	unw_access_br(i,n,v,0)
+#define unw_get_fr(i,n,v)	unw_access_fr(i,n,v,0)
+#define unw_get_ar(i,n,v)	unw_access_ar(i,n,v,0)
+#define unw_get_pr(i,v)		unw_access_pr(i,v,0)
+
+#endif /* _ASM_UNWIND_H */
diff --git a/arch/ia64/include/asm/user.h b/arch/ia64/include/asm/user.h
new file mode 100644
index 000000000000..8b9821110348
--- /dev/null
+++ b/arch/ia64/include/asm/user.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_IA64_USER_H
+#define _ASM_IA64_USER_H
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd).  The file contents are as
+ * follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ *
+ * Modified 1998, 1999, 2001
+ *	David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
+ */
+
+#include <linux/ptrace.h>
+#include <linux/types.h>
+
+#include <asm/page.h>
+
+#define EF_SIZE		3072	/* XXX fix me */
+
+struct user {
+	unsigned long	regs[EF_SIZE/8+32];	/* integer and fp regs */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	unsigned long	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _ASM_IA64_USER_H */
diff --git a/arch/ia64/include/asm/ustack.h b/arch/ia64/include/asm/ustack.h
new file mode 100644
index 000000000000..504167c35b8b
--- /dev/null
+++ b/arch/ia64/include/asm/ustack.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_IA64_USTACK_H
+#define _ASM_IA64_USTACK_H
+
+/*
+ * Constants for the user stack size
+ */
+
+#ifdef __KERNEL__
+#include <asm/page.h>
+
+/* The absolute hard limit for stack size is 1/2 of the mappable space in the region */
+#define MAX_USER_STACK_SIZE	(RGN_MAP_LIMIT/2)
+#define STACK_TOP		(0x6000000000000000UL + RGN_MAP_LIMIT)
+#define STACK_TOP_MAX		STACK_TOP
+#endif
+
+/* Make a default stack size of 2GiB */
+#define DEFAULT_USER_STACK_SIZE	(1UL << 31)
+
+#endif /* _ASM_IA64_USTACK_H */
diff --git a/arch/ia64/include/asm/uv/uv_hub.h b/arch/ia64/include/asm/uv/uv_hub.h
new file mode 100644
index 000000000000..f607018af4a1
--- /dev/null
+++ b/arch/ia64/include/asm/uv/uv_hub.h
@@ -0,0 +1,309 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV architectural definitions
+ *
+ * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef __ASM_IA64_UV_HUB_H__
+#define __ASM_IA64_UV_HUB_H__
+
+#include <linux/numa.h>
+#include <linux/percpu.h>
+#include <asm/types.h>
+#include <asm/percpu.h>
+
+
+/*
+ * Addressing Terminology
+ *
+ *	M       - The low M bits of a physical address represent the offset
+ *		  into the blade local memory. RAM memory on a blade is physically
+ *		  contiguous (although various IO spaces may punch holes in
+ *		  it)..
+ *
+ * 	N	- Number of bits in the node portion of a socket physical
+ * 		  address.
+ *
+ * 	NASID   - network ID of a router, Mbrick or Cbrick. Nasid values of
+ * 	 	  routers always have low bit of 1, C/MBricks have low bit
+ * 		  equal to 0. Most addressing macros that target UV hub chips
+ * 		  right shift the NASID by 1 to exclude the always-zero bit.
+ * 		  NASIDs contain up to 15 bits.
+ *
+ *	GNODE   - NASID right shifted by 1 bit. Most mmrs contain gnodes instead
+ *		  of nasids.
+ *
+ * 	PNODE   - the low N bits of the GNODE. The PNODE is the most useful variant
+ * 		  of the nasid for socket usage.
+ *
+ *
+ *  NumaLink Global Physical Address Format:
+ *  +--------------------------------+---------------------+
+ *  |00..000|      GNODE             |      NodeOffset     |
+ *  +--------------------------------+---------------------+
+ *          |<-------53 - M bits --->|<--------M bits ----->
+ *
+ *	M - number of node offset bits (35 .. 40)
+ *
+ *
+ *  Memory/UV-HUB Processor Socket Address Format:
+ *  +----------------+---------------+---------------------+
+ *  |00..000000000000|   PNODE       |      NodeOffset     |
+ *  +----------------+---------------+---------------------+
+ *                   <--- N bits --->|<--------M bits ----->
+ *
+ *	M - number of node offset bits (35 .. 40)
+ *	N - number of PNODE bits (0 .. 10)
+ *
+ *		Note: M + N cannot currently exceed 44 (x86_64) or 46 (IA64).
+ *		The actual values are configuration dependent and are set at
+ *		boot time. M & N values are set by the hardware/BIOS at boot.
+ */
+
+
+/*
+ * Maximum number of bricks in all partitions and in all coherency domains.
+ * This is the total number of bricks accessible in the numalink fabric. It
+ * includes all C & M bricks. Routers are NOT included.
+ *
+ * This value is also the value of the maximum number of non-router NASIDs
+ * in the numalink fabric.
+ *
+ * NOTE: a brick may contain 1 or 2 OS nodes. Don't get these confused.
+ */
+#define UV_MAX_NUMALINK_BLADES	16384
+
+/*
+ * Maximum number of C/Mbricks within a software SSI (hardware may support
+ * more).
+ */
+#define UV_MAX_SSI_BLADES	1
+
+/*
+ * The largest possible NASID of a C or M brick (+ 2)
+ */
+#define UV_MAX_NASID_VALUE	(UV_MAX_NUMALINK_NODES * 2)
+
+/*
+ * The following defines attributes of the HUB chip. These attributes are
+ * frequently referenced and are kept in the per-cpu data areas of each cpu.
+ * They are kept together in a struct to minimize cache misses.
+ */
+struct uv_hub_info_s {
+	unsigned long	global_mmr_base;
+	unsigned long	gpa_mask;
+	unsigned long	gnode_upper;
+	unsigned long	lowmem_remap_top;
+	unsigned long	lowmem_remap_base;
+	unsigned short	pnode;
+	unsigned short	pnode_mask;
+	unsigned short	coherency_domain_number;
+	unsigned short	numa_blade_id;
+	unsigned char	blade_processor_id;
+	unsigned char	m_val;
+	unsigned char	n_val;
+};
+DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
+#define uv_hub_info 		(&__get_cpu_var(__uv_hub_info))
+#define uv_cpu_hub_info(cpu)	(&per_cpu(__uv_hub_info, cpu))
+
+/*
+ * Local & Global MMR space macros.
+ * 	Note: macros are intended to be used ONLY by inline functions
+ * 	in this file - not by other kernel code.
+ * 		n -  NASID (full 15-bit global nasid)
+ * 		g -  GNODE (full 15-bit global nasid, right shifted 1)
+ * 		p -  PNODE (local part of nsids, right shifted 1)
+ */
+#define UV_NASID_TO_PNODE(n)		(((n) >> 1) & uv_hub_info->pnode_mask)
+#define UV_PNODE_TO_NASID(p)		(((p) << 1) | uv_hub_info->gnode_upper)
+
+#define UV_LOCAL_MMR_BASE		0xf4000000UL
+#define UV_GLOBAL_MMR32_BASE		0xf8000000UL
+#define UV_GLOBAL_MMR64_BASE		(uv_hub_info->global_mmr_base)
+
+#define UV_GLOBAL_MMR32_PNODE_SHIFT	15
+#define UV_GLOBAL_MMR64_PNODE_SHIFT	26
+
+#define UV_GLOBAL_MMR32_PNODE_BITS(p)	((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT))
+
+#define UV_GLOBAL_MMR64_PNODE_BITS(p)					\
+	((unsigned long)(p) << UV_GLOBAL_MMR64_PNODE_SHIFT)
+
+/*
+ * Macros for converting between kernel virtual addresses, socket local physical
+ * addresses, and UV global physical addresses.
+ * 	Note: use the standard __pa() & __va() macros for converting
+ * 	      between socket virtual and socket physical addresses.
+ */
+
+/* socket phys RAM --> UV global physical address */
+static inline unsigned long uv_soc_phys_ram_to_gpa(unsigned long paddr)
+{
+	if (paddr < uv_hub_info->lowmem_remap_top)
+		paddr += uv_hub_info->lowmem_remap_base;
+	return paddr | uv_hub_info->gnode_upper;
+}
+
+
+/* socket virtual --> UV global physical address */
+static inline unsigned long uv_gpa(void *v)
+{
+	return __pa(v) | uv_hub_info->gnode_upper;
+}
+
+/* socket virtual --> UV global physical address */
+static inline void *uv_vgpa(void *v)
+{
+	return (void *)uv_gpa(v);
+}
+
+/* UV global physical address --> socket virtual */
+static inline void *uv_va(unsigned long gpa)
+{
+	return __va(gpa & uv_hub_info->gpa_mask);
+}
+
+/* pnode, offset --> socket virtual */
+static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset)
+{
+	return __va(((unsigned long)pnode << uv_hub_info->m_val) | offset);
+}
+
+
+/*
+ * Access global MMRs using the low memory MMR32 space. This region supports
+ * faster MMR access but not all MMRs are accessible in this space.
+ */
+static inline unsigned long *uv_global_mmr32_address(int pnode,
+				unsigned long offset)
+{
+	return __va(UV_GLOBAL_MMR32_BASE |
+		       UV_GLOBAL_MMR32_PNODE_BITS(pnode) | offset);
+}
+
+static inline void uv_write_global_mmr32(int pnode, unsigned long offset,
+				 unsigned long val)
+{
+	*uv_global_mmr32_address(pnode, offset) = val;
+}
+
+static inline unsigned long uv_read_global_mmr32(int pnode,
+						 unsigned long offset)
+{
+	return *uv_global_mmr32_address(pnode, offset);
+}
+
+/*
+ * Access Global MMR space using the MMR space located at the top of physical
+ * memory.
+ */
+static inline unsigned long *uv_global_mmr64_address(int pnode,
+				unsigned long offset)
+{
+	return __va(UV_GLOBAL_MMR64_BASE |
+		    UV_GLOBAL_MMR64_PNODE_BITS(pnode) | offset);
+}
+
+static inline void uv_write_global_mmr64(int pnode, unsigned long offset,
+				unsigned long val)
+{
+	*uv_global_mmr64_address(pnode, offset) = val;
+}
+
+static inline unsigned long uv_read_global_mmr64(int pnode,
+						 unsigned long offset)
+{
+	return *uv_global_mmr64_address(pnode, offset);
+}
+
+/*
+ * Access hub local MMRs. Faster than using global space but only local MMRs
+ * are accessible.
+ */
+static inline unsigned long *uv_local_mmr_address(unsigned long offset)
+{
+	return __va(UV_LOCAL_MMR_BASE | offset);
+}
+
+static inline unsigned long uv_read_local_mmr(unsigned long offset)
+{
+	return *uv_local_mmr_address(offset);
+}
+
+static inline void uv_write_local_mmr(unsigned long offset, unsigned long val)
+{
+	*uv_local_mmr_address(offset) = val;
+}
+
+/*
+ * Structures and definitions for converting between cpu, node, pnode, and blade
+ * numbers.
+ */
+
+/* Blade-local cpu number of current cpu. Numbered 0 .. <# cpus on the blade> */
+static inline int uv_blade_processor_id(void)
+{
+	return smp_processor_id();
+}
+
+/* Blade number of current cpu. Numnbered 0 .. <#blades -1> */
+static inline int uv_numa_blade_id(void)
+{
+	return 0;
+}
+
+/* Convert a cpu number to the the UV blade number */
+static inline int uv_cpu_to_blade_id(int cpu)
+{
+	return 0;
+}
+
+/* Convert linux node number to the UV blade number */
+static inline int uv_node_to_blade_id(int nid)
+{
+	return 0;
+}
+
+/* Convert a blade id to the PNODE of the blade */
+static inline int uv_blade_to_pnode(int bid)
+{
+	return 0;
+}
+
+/* Determine the number of possible cpus on a blade */
+static inline int uv_blade_nr_possible_cpus(int bid)
+{
+	return num_possible_cpus();
+}
+
+/* Determine the number of online cpus on a blade */
+static inline int uv_blade_nr_online_cpus(int bid)
+{
+	return num_online_cpus();
+}
+
+/* Convert a cpu id to the PNODE of the blade containing the cpu */
+static inline int uv_cpu_to_pnode(int cpu)
+{
+	return 0;
+}
+
+/* Convert a linux node number to the PNODE of the blade */
+static inline int uv_node_to_pnode(int nid)
+{
+	return 0;
+}
+
+/* Maximum possible number of blades */
+static inline int uv_num_possible_blades(void)
+{
+	return 1;
+}
+
+#endif /* __ASM_IA64_UV_HUB__ */
+
diff --git a/arch/ia64/include/asm/uv/uv_mmrs.h b/arch/ia64/include/asm/uv/uv_mmrs.h
new file mode 100644
index 000000000000..c149ef085437
--- /dev/null
+++ b/arch/ia64/include/asm/uv/uv_mmrs.h
@@ -0,0 +1,673 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV MMR definitions
+ *
+ * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef __ASM_IA64_UV_MMRS__
+#define __ASM_IA64_UV_MMRS__
+
+#define UV_MMR_ENABLE		(1UL << 63)
+
+/* ========================================================================= */
+/*                           UVH_BAU_DATA_CONFIG                             */
+/* ========================================================================= */
+#define UVH_BAU_DATA_CONFIG 0x61680UL
+#define UVH_BAU_DATA_CONFIG_32 0x0438
+
+#define UVH_BAU_DATA_CONFIG_VECTOR_SHFT 0
+#define UVH_BAU_DATA_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_BAU_DATA_CONFIG_DM_SHFT 8
+#define UVH_BAU_DATA_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_BAU_DATA_CONFIG_DESTMODE_SHFT 11
+#define UVH_BAU_DATA_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_BAU_DATA_CONFIG_STATUS_SHFT 12
+#define UVH_BAU_DATA_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_BAU_DATA_CONFIG_P_SHFT 13
+#define UVH_BAU_DATA_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_BAU_DATA_CONFIG_T_SHFT 15
+#define UVH_BAU_DATA_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_BAU_DATA_CONFIG_M_SHFT 16
+#define UVH_BAU_DATA_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_BAU_DATA_CONFIG_APIC_ID_SHFT 32
+#define UVH_BAU_DATA_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_bau_data_config_u {
+    unsigned long	v;
+    struct uvh_bau_data_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                           UVH_EVENT_OCCURRED0                             */
+/* ========================================================================= */
+#define UVH_EVENT_OCCURRED0 0x70000UL
+#define UVH_EVENT_OCCURRED0_32 0x005e8
+
+#define UVH_EVENT_OCCURRED0_LB_HCERR_SHFT 0
+#define UVH_EVENT_OCCURRED0_LB_HCERR_MASK 0x0000000000000001UL
+#define UVH_EVENT_OCCURRED0_GR0_HCERR_SHFT 1
+#define UVH_EVENT_OCCURRED0_GR0_HCERR_MASK 0x0000000000000002UL
+#define UVH_EVENT_OCCURRED0_GR1_HCERR_SHFT 2
+#define UVH_EVENT_OCCURRED0_GR1_HCERR_MASK 0x0000000000000004UL
+#define UVH_EVENT_OCCURRED0_LH_HCERR_SHFT 3
+#define UVH_EVENT_OCCURRED0_LH_HCERR_MASK 0x0000000000000008UL
+#define UVH_EVENT_OCCURRED0_RH_HCERR_SHFT 4
+#define UVH_EVENT_OCCURRED0_RH_HCERR_MASK 0x0000000000000010UL
+#define UVH_EVENT_OCCURRED0_XN_HCERR_SHFT 5
+#define UVH_EVENT_OCCURRED0_XN_HCERR_MASK 0x0000000000000020UL
+#define UVH_EVENT_OCCURRED0_SI_HCERR_SHFT 6
+#define UVH_EVENT_OCCURRED0_SI_HCERR_MASK 0x0000000000000040UL
+#define UVH_EVENT_OCCURRED0_LB_AOERR0_SHFT 7
+#define UVH_EVENT_OCCURRED0_LB_AOERR0_MASK 0x0000000000000080UL
+#define UVH_EVENT_OCCURRED0_GR0_AOERR0_SHFT 8
+#define UVH_EVENT_OCCURRED0_GR0_AOERR0_MASK 0x0000000000000100UL
+#define UVH_EVENT_OCCURRED0_GR1_AOERR0_SHFT 9
+#define UVH_EVENT_OCCURRED0_GR1_AOERR0_MASK 0x0000000000000200UL
+#define UVH_EVENT_OCCURRED0_LH_AOERR0_SHFT 10
+#define UVH_EVENT_OCCURRED0_LH_AOERR0_MASK 0x0000000000000400UL
+#define UVH_EVENT_OCCURRED0_RH_AOERR0_SHFT 11
+#define UVH_EVENT_OCCURRED0_RH_AOERR0_MASK 0x0000000000000800UL
+#define UVH_EVENT_OCCURRED0_XN_AOERR0_SHFT 12
+#define UVH_EVENT_OCCURRED0_XN_AOERR0_MASK 0x0000000000001000UL
+#define UVH_EVENT_OCCURRED0_SI_AOERR0_SHFT 13
+#define UVH_EVENT_OCCURRED0_SI_AOERR0_MASK 0x0000000000002000UL
+#define UVH_EVENT_OCCURRED0_LB_AOERR1_SHFT 14
+#define UVH_EVENT_OCCURRED0_LB_AOERR1_MASK 0x0000000000004000UL
+#define UVH_EVENT_OCCURRED0_GR0_AOERR1_SHFT 15
+#define UVH_EVENT_OCCURRED0_GR0_AOERR1_MASK 0x0000000000008000UL
+#define UVH_EVENT_OCCURRED0_GR1_AOERR1_SHFT 16
+#define UVH_EVENT_OCCURRED0_GR1_AOERR1_MASK 0x0000000000010000UL
+#define UVH_EVENT_OCCURRED0_LH_AOERR1_SHFT 17
+#define UVH_EVENT_OCCURRED0_LH_AOERR1_MASK 0x0000000000020000UL
+#define UVH_EVENT_OCCURRED0_RH_AOERR1_SHFT 18
+#define UVH_EVENT_OCCURRED0_RH_AOERR1_MASK 0x0000000000040000UL
+#define UVH_EVENT_OCCURRED0_XN_AOERR1_SHFT 19
+#define UVH_EVENT_OCCURRED0_XN_AOERR1_MASK 0x0000000000080000UL
+#define UVH_EVENT_OCCURRED0_SI_AOERR1_SHFT 20
+#define UVH_EVENT_OCCURRED0_SI_AOERR1_MASK 0x0000000000100000UL
+#define UVH_EVENT_OCCURRED0_RH_VPI_INT_SHFT 21
+#define UVH_EVENT_OCCURRED0_RH_VPI_INT_MASK 0x0000000000200000UL
+#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_SHFT 22
+#define UVH_EVENT_OCCURRED0_SYSTEM_SHUTDOWN_INT_MASK 0x0000000000400000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_SHFT 23
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_0_MASK 0x0000000000800000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_SHFT 24
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_1_MASK 0x0000000001000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_SHFT 25
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_2_MASK 0x0000000002000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_SHFT 26
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_3_MASK 0x0000000004000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_SHFT 27
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_4_MASK 0x0000000008000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_SHFT 28
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_5_MASK 0x0000000010000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_SHFT 29
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_6_MASK 0x0000000020000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_SHFT 30
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_7_MASK 0x0000000040000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_SHFT 31
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_8_MASK 0x0000000080000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_SHFT 32
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_9_MASK 0x0000000100000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_SHFT 33
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_10_MASK 0x0000000200000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_SHFT 34
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_11_MASK 0x0000000400000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_SHFT 35
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_12_MASK 0x0000000800000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_SHFT 36
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_13_MASK 0x0000001000000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_SHFT 37
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_14_MASK 0x0000002000000000UL
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_SHFT 38
+#define UVH_EVENT_OCCURRED0_LB_IRQ_INT_15_MASK 0x0000004000000000UL
+#define UVH_EVENT_OCCURRED0_L1_NMI_INT_SHFT 39
+#define UVH_EVENT_OCCURRED0_L1_NMI_INT_MASK 0x0000008000000000UL
+#define UVH_EVENT_OCCURRED0_STOP_CLOCK_SHFT 40
+#define UVH_EVENT_OCCURRED0_STOP_CLOCK_MASK 0x0000010000000000UL
+#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_SHFT 41
+#define UVH_EVENT_OCCURRED0_ASIC_TO_L1_MASK 0x0000020000000000UL
+#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_SHFT 42
+#define UVH_EVENT_OCCURRED0_L1_TO_ASIC_MASK 0x0000040000000000UL
+#define UVH_EVENT_OCCURRED0_LTC_INT_SHFT 43
+#define UVH_EVENT_OCCURRED0_LTC_INT_MASK 0x0000080000000000UL
+#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_SHFT 44
+#define UVH_EVENT_OCCURRED0_LA_SEQ_TRIGGER_MASK 0x0000100000000000UL
+#define UVH_EVENT_OCCURRED0_IPI_INT_SHFT 45
+#define UVH_EVENT_OCCURRED0_IPI_INT_MASK 0x0000200000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT0_SHFT 46
+#define UVH_EVENT_OCCURRED0_EXTIO_INT0_MASK 0x0000400000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT1_SHFT 47
+#define UVH_EVENT_OCCURRED0_EXTIO_INT1_MASK 0x0000800000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT2_SHFT 48
+#define UVH_EVENT_OCCURRED0_EXTIO_INT2_MASK 0x0001000000000000UL
+#define UVH_EVENT_OCCURRED0_EXTIO_INT3_SHFT 49
+#define UVH_EVENT_OCCURRED0_EXTIO_INT3_MASK 0x0002000000000000UL
+#define UVH_EVENT_OCCURRED0_PROFILE_INT_SHFT 50
+#define UVH_EVENT_OCCURRED0_PROFILE_INT_MASK 0x0004000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC0_SHFT 51
+#define UVH_EVENT_OCCURRED0_RTC0_MASK 0x0008000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC1_SHFT 52
+#define UVH_EVENT_OCCURRED0_RTC1_MASK 0x0010000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC2_SHFT 53
+#define UVH_EVENT_OCCURRED0_RTC2_MASK 0x0020000000000000UL
+#define UVH_EVENT_OCCURRED0_RTC3_SHFT 54
+#define UVH_EVENT_OCCURRED0_RTC3_MASK 0x0040000000000000UL
+#define UVH_EVENT_OCCURRED0_BAU_DATA_SHFT 55
+#define UVH_EVENT_OCCURRED0_BAU_DATA_MASK 0x0080000000000000UL
+#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_SHFT 56
+#define UVH_EVENT_OCCURRED0_POWER_MANAGEMENT_REQ_MASK 0x0100000000000000UL
+union uvh_event_occurred0_u {
+    unsigned long	v;
+    struct uvh_event_occurred0_s {
+	unsigned long	lb_hcerr             :  1;  /* RW, W1C */
+	unsigned long	gr0_hcerr            :  1;  /* RW, W1C */
+	unsigned long	gr1_hcerr            :  1;  /* RW, W1C */
+	unsigned long	lh_hcerr             :  1;  /* RW, W1C */
+	unsigned long	rh_hcerr             :  1;  /* RW, W1C */
+	unsigned long	xn_hcerr             :  1;  /* RW, W1C */
+	unsigned long	si_hcerr             :  1;  /* RW, W1C */
+	unsigned long	lb_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	gr0_aoerr0           :  1;  /* RW, W1C */
+	unsigned long	gr1_aoerr0           :  1;  /* RW, W1C */
+	unsigned long	lh_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	rh_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	xn_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	si_aoerr0            :  1;  /* RW, W1C */
+	unsigned long	lb_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	gr0_aoerr1           :  1;  /* RW, W1C */
+	unsigned long	gr1_aoerr1           :  1;  /* RW, W1C */
+	unsigned long	lh_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	rh_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	xn_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	si_aoerr1            :  1;  /* RW, W1C */
+	unsigned long	rh_vpi_int           :  1;  /* RW, W1C */
+	unsigned long	system_shutdown_int  :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_0         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_1         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_2         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_3         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_4         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_5         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_6         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_7         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_8         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_9         :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_10        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_11        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_12        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_13        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_14        :  1;  /* RW, W1C */
+	unsigned long	lb_irq_int_15        :  1;  /* RW, W1C */
+	unsigned long	l1_nmi_int           :  1;  /* RW, W1C */
+	unsigned long	stop_clock           :  1;  /* RW, W1C */
+	unsigned long	asic_to_l1           :  1;  /* RW, W1C */
+	unsigned long	l1_to_asic           :  1;  /* RW, W1C */
+	unsigned long	ltc_int              :  1;  /* RW, W1C */
+	unsigned long	la_seq_trigger       :  1;  /* RW, W1C */
+	unsigned long	ipi_int              :  1;  /* RW, W1C */
+	unsigned long	extio_int0           :  1;  /* RW, W1C */
+	unsigned long	extio_int1           :  1;  /* RW, W1C */
+	unsigned long	extio_int2           :  1;  /* RW, W1C */
+	unsigned long	extio_int3           :  1;  /* RW, W1C */
+	unsigned long	profile_int          :  1;  /* RW, W1C */
+	unsigned long	rtc0                 :  1;  /* RW, W1C */
+	unsigned long	rtc1                 :  1;  /* RW, W1C */
+	unsigned long	rtc2                 :  1;  /* RW, W1C */
+	unsigned long	rtc3                 :  1;  /* RW, W1C */
+	unsigned long	bau_data             :  1;  /* RW, W1C */
+	unsigned long	power_management_req :  1;  /* RW, W1C */
+	unsigned long	rsvd_57_63           :  7;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                        UVH_EVENT_OCCURRED0_ALIAS                          */
+/* ========================================================================= */
+#define UVH_EVENT_OCCURRED0_ALIAS 0x0000000000070008UL
+#define UVH_EVENT_OCCURRED0_ALIAS_32 0x005f0
+
+/* ========================================================================= */
+/*                               UVH_INT_CMPB                                */
+/* ========================================================================= */
+#define UVH_INT_CMPB 0x22080UL
+
+#define UVH_INT_CMPB_REAL_TIME_CMPB_SHFT 0
+#define UVH_INT_CMPB_REAL_TIME_CMPB_MASK 0x00ffffffffffffffUL
+
+union uvh_int_cmpb_u {
+    unsigned long	v;
+    struct uvh_int_cmpb_s {
+	unsigned long	real_time_cmpb : 56;  /* RW */
+	unsigned long	rsvd_56_63     :  8;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                               UVH_INT_CMPC                                */
+/* ========================================================================= */
+#define UVH_INT_CMPC 0x22100UL
+
+#define UVH_INT_CMPC_REAL_TIME_CMPC_SHFT 0
+#define UVH_INT_CMPC_REAL_TIME_CMPC_MASK 0x00ffffffffffffffUL
+
+union uvh_int_cmpc_u {
+    unsigned long	v;
+    struct uvh_int_cmpc_s {
+	unsigned long	real_time_cmpc : 56;  /* RW */
+	unsigned long	rsvd_56_63     :  8;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                               UVH_INT_CMPD                                */
+/* ========================================================================= */
+#define UVH_INT_CMPD 0x22180UL
+
+#define UVH_INT_CMPD_REAL_TIME_CMPD_SHFT 0
+#define UVH_INT_CMPD_REAL_TIME_CMPD_MASK 0x00ffffffffffffffUL
+
+union uvh_int_cmpd_u {
+    unsigned long	v;
+    struct uvh_int_cmpd_s {
+	unsigned long	real_time_cmpd : 56;  /* RW */
+	unsigned long	rsvd_56_63     :  8;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                               UVH_NODE_ID                                 */
+/* ========================================================================= */
+#define UVH_NODE_ID 0x0UL
+
+#define UVH_NODE_ID_FORCE1_SHFT 0
+#define UVH_NODE_ID_FORCE1_MASK 0x0000000000000001UL
+#define UVH_NODE_ID_MANUFACTURER_SHFT 1
+#define UVH_NODE_ID_MANUFACTURER_MASK 0x0000000000000ffeUL
+#define UVH_NODE_ID_PART_NUMBER_SHFT 12
+#define UVH_NODE_ID_PART_NUMBER_MASK 0x000000000ffff000UL
+#define UVH_NODE_ID_REVISION_SHFT 28
+#define UVH_NODE_ID_REVISION_MASK 0x00000000f0000000UL
+#define UVH_NODE_ID_NODE_ID_SHFT 32
+#define UVH_NODE_ID_NODE_ID_MASK 0x00007fff00000000UL
+#define UVH_NODE_ID_NODES_PER_BIT_SHFT 48
+#define UVH_NODE_ID_NODES_PER_BIT_MASK 0x007f000000000000UL
+#define UVH_NODE_ID_NI_PORT_SHFT 56
+#define UVH_NODE_ID_NI_PORT_MASK 0x0f00000000000000UL
+
+union uvh_node_id_u {
+    unsigned long	v;
+    struct uvh_node_id_s {
+	unsigned long	force1        :  1;  /* RO */
+	unsigned long	manufacturer  : 11;  /* RO */
+	unsigned long	part_number   : 16;  /* RO */
+	unsigned long	revision      :  4;  /* RO */
+	unsigned long	node_id       : 15;  /* RW */
+	unsigned long	rsvd_47       :  1;  /*    */
+	unsigned long	nodes_per_bit :  7;  /* RW */
+	unsigned long	rsvd_55       :  1;  /*    */
+	unsigned long	ni_port       :  4;  /* RO */
+	unsigned long	rsvd_60_63    :  4;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_0_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_redirect_config_0_mmr_s {
+	unsigned long	rsvd_0_23 : 24;  /*    */
+	unsigned long	dest_base : 22;  /* RW */
+	unsigned long	rsvd_46_63: 18;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x16000e0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_1_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_redirect_config_1_mmr_s {
+	unsigned long	rsvd_0_23 : 24;  /*    */
+	unsigned long	dest_base : 22;  /* RW */
+	unsigned long	rsvd_46_63: 18;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR                  */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x16000f0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_2_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_alias210_redirect_config_2_mmr_s {
+	unsigned long	rsvd_0_23 : 24;  /*    */
+	unsigned long	dest_base : 22;  /* RW */
+	unsigned long	rsvd_46_63: 18;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR                      */
+/* ========================================================================= */
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
+
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff0000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_SHFT 48
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_MASK 0x0001000000000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_gru_overlay_config_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_gru_overlay_config_mmr_s {
+	unsigned long	rsvd_0_27: 28;  /*    */
+	unsigned long	base   : 18;  /* RW */
+	unsigned long	rsvd_46_47:  2;  /*    */
+	unsigned long	gr4    :  1;  /* RW */
+	unsigned long	rsvd_49_51:  3;  /*    */
+	unsigned long	n_gru  :  4;  /* RW */
+	unsigned long	rsvd_56_62:  7;  /*    */
+	unsigned long	enable :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                    UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR                      */
+/* ========================================================================= */
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL
+
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_SHFT 46
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_MASK 0x0000400000000000UL
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_mmr_overlay_config_mmr_u {
+    unsigned long	v;
+    struct uvh_rh_gam_mmr_overlay_config_mmr_s {
+	unsigned long	rsvd_0_25: 26;  /*    */
+	unsigned long	base     : 20;  /* RW */
+	unsigned long	dual_hub :  1;  /* RW */
+	unsigned long	rsvd_47_62: 16;  /*    */
+	unsigned long	enable   :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                                 UVH_RTC                                   */
+/* ========================================================================= */
+#define UVH_RTC 0x340000UL
+
+#define UVH_RTC_REAL_TIME_CLOCK_SHFT 0
+#define UVH_RTC_REAL_TIME_CLOCK_MASK 0x00ffffffffffffffUL
+
+union uvh_rtc_u {
+    unsigned long	v;
+    struct uvh_rtc_s {
+	unsigned long	real_time_clock : 56;  /* RW */
+	unsigned long	rsvd_56_63      :  8;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                           UVH_RTC1_INT_CONFIG                             */
+/* ========================================================================= */
+#define UVH_RTC1_INT_CONFIG 0x615c0UL
+
+#define UVH_RTC1_INT_CONFIG_VECTOR_SHFT 0
+#define UVH_RTC1_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_RTC1_INT_CONFIG_DM_SHFT 8
+#define UVH_RTC1_INT_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_RTC1_INT_CONFIG_DESTMODE_SHFT 11
+#define UVH_RTC1_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_RTC1_INT_CONFIG_STATUS_SHFT 12
+#define UVH_RTC1_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_RTC1_INT_CONFIG_P_SHFT 13
+#define UVH_RTC1_INT_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_RTC1_INT_CONFIG_T_SHFT 15
+#define UVH_RTC1_INT_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_RTC1_INT_CONFIG_M_SHFT 16
+#define UVH_RTC1_INT_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_RTC1_INT_CONFIG_APIC_ID_SHFT 32
+#define UVH_RTC1_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_rtc1_int_config_u {
+    unsigned long	v;
+    struct uvh_rtc1_int_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                           UVH_RTC2_INT_CONFIG                             */
+/* ========================================================================= */
+#define UVH_RTC2_INT_CONFIG 0x61600UL
+
+#define UVH_RTC2_INT_CONFIG_VECTOR_SHFT 0
+#define UVH_RTC2_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_RTC2_INT_CONFIG_DM_SHFT 8
+#define UVH_RTC2_INT_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_RTC2_INT_CONFIG_DESTMODE_SHFT 11
+#define UVH_RTC2_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_RTC2_INT_CONFIG_STATUS_SHFT 12
+#define UVH_RTC2_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_RTC2_INT_CONFIG_P_SHFT 13
+#define UVH_RTC2_INT_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_RTC2_INT_CONFIG_T_SHFT 15
+#define UVH_RTC2_INT_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_RTC2_INT_CONFIG_M_SHFT 16
+#define UVH_RTC2_INT_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_RTC2_INT_CONFIG_APIC_ID_SHFT 32
+#define UVH_RTC2_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_rtc2_int_config_u {
+    unsigned long	v;
+    struct uvh_rtc2_int_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                           UVH_RTC3_INT_CONFIG                             */
+/* ========================================================================= */
+#define UVH_RTC3_INT_CONFIG 0x61640UL
+
+#define UVH_RTC3_INT_CONFIG_VECTOR_SHFT 0
+#define UVH_RTC3_INT_CONFIG_VECTOR_MASK 0x00000000000000ffUL
+#define UVH_RTC3_INT_CONFIG_DM_SHFT 8
+#define UVH_RTC3_INT_CONFIG_DM_MASK 0x0000000000000700UL
+#define UVH_RTC3_INT_CONFIG_DESTMODE_SHFT 11
+#define UVH_RTC3_INT_CONFIG_DESTMODE_MASK 0x0000000000000800UL
+#define UVH_RTC3_INT_CONFIG_STATUS_SHFT 12
+#define UVH_RTC3_INT_CONFIG_STATUS_MASK 0x0000000000001000UL
+#define UVH_RTC3_INT_CONFIG_P_SHFT 13
+#define UVH_RTC3_INT_CONFIG_P_MASK 0x0000000000002000UL
+#define UVH_RTC3_INT_CONFIG_T_SHFT 15
+#define UVH_RTC3_INT_CONFIG_T_MASK 0x0000000000008000UL
+#define UVH_RTC3_INT_CONFIG_M_SHFT 16
+#define UVH_RTC3_INT_CONFIG_M_MASK 0x0000000000010000UL
+#define UVH_RTC3_INT_CONFIG_APIC_ID_SHFT 32
+#define UVH_RTC3_INT_CONFIG_APIC_ID_MASK 0xffffffff00000000UL
+
+union uvh_rtc3_int_config_u {
+    unsigned long	v;
+    struct uvh_rtc3_int_config_s {
+	unsigned long	vector_  :  8;  /* RW */
+	unsigned long	dm       :  3;  /* RW */
+	unsigned long	destmode :  1;  /* RW */
+	unsigned long	status   :  1;  /* RO */
+	unsigned long	p        :  1;  /* RO */
+	unsigned long	rsvd_14  :  1;  /*    */
+	unsigned long	t        :  1;  /* RO */
+	unsigned long	m        :  1;  /* RW */
+	unsigned long	rsvd_17_31: 15;  /*    */
+	unsigned long	apic_id  : 32;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                            UVH_RTC_INC_RATIO                              */
+/* ========================================================================= */
+#define UVH_RTC_INC_RATIO 0x350000UL
+
+#define UVH_RTC_INC_RATIO_FRACTION_SHFT 0
+#define UVH_RTC_INC_RATIO_FRACTION_MASK 0x00000000000fffffUL
+#define UVH_RTC_INC_RATIO_RATIO_SHFT 20
+#define UVH_RTC_INC_RATIO_RATIO_MASK 0x0000000000700000UL
+
+union uvh_rtc_inc_ratio_u {
+    unsigned long	v;
+    struct uvh_rtc_inc_ratio_s {
+	unsigned long	fraction : 20;  /* RW */
+	unsigned long	ratio    :  3;  /* RW */
+	unsigned long	rsvd_23_63: 41;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                          UVH_SI_ADDR_MAP_CONFIG                           */
+/* ========================================================================= */
+#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL
+
+#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0
+#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL
+#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8
+#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL
+
+union uvh_si_addr_map_config_u {
+    unsigned long	v;
+    struct uvh_si_addr_map_config_s {
+	unsigned long	m_skt :  6;  /* RW */
+	unsigned long	rsvd_6_7:  2;  /*    */
+	unsigned long	n_skt :  4;  /* RW */
+	unsigned long	rsvd_12_63: 52;  /*    */
+    } s;
+};
+
+/* ========================================================================= */
+/*                       UVH_SI_ALIAS0_OVERLAY_CONFIG                        */
+/* ========================================================================= */
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL
+
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias0_overlay_config_u {
+    unsigned long	v;
+    struct uvh_si_alias0_overlay_config_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                       UVH_SI_ALIAS1_OVERLAY_CONFIG                        */
+/* ========================================================================= */
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL
+
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias1_overlay_config_u {
+    unsigned long	v;
+    struct uvh_si_alias1_overlay_config_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+/* ========================================================================= */
+/*                       UVH_SI_ALIAS2_OVERLAY_CONFIG                        */
+/* ========================================================================= */
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL
+
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias2_overlay_config_u {
+    unsigned long	v;
+    struct uvh_si_alias2_overlay_config_s {
+	unsigned long	rsvd_0_23: 24;  /*    */
+	unsigned long	base    :  8;  /* RW */
+	unsigned long	rsvd_32_47: 16;  /*    */
+	unsigned long	m_alias :  5;  /* RW */
+	unsigned long	rsvd_53_62: 10;  /*    */
+	unsigned long	enable  :  1;  /* RW */
+    } s;
+};
+
+
+#endif /* __ASM_IA64_UV_MMRS__ */
diff --git a/arch/ia64/include/asm/vga.h b/arch/ia64/include/asm/vga.h
new file mode 100644
index 000000000000..02184ecd8208
--- /dev/null
+++ b/arch/ia64/include/asm/vga.h
@@ -0,0 +1,25 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ *	(c) 1999 Asit Mallick <asit.k.mallick@intel.com>
+ *	(c) 1999 Don Dugger <don.dugger@intel.com>
+ */
+
+#ifndef __ASM_IA64_VGA_H_
+#define __ASM_IA64_VGA_H_
+
+/*
+ * On the PC, we can just recalculate addresses and then access the
+ * videoram directly without any black magic.
+ */
+
+extern unsigned long vga_console_iobase;
+extern unsigned long vga_console_membase;
+
+#define VGA_MAP_MEM(x,s)	((unsigned long) ioremap_nocache(vga_console_membase + (x), s))
+
+#define vga_readb(x)	(*(x))
+#define vga_writeb(x,y)	(*(y) = (x))
+
+#endif /* __ASM_IA64_VGA_H_ */
diff --git a/arch/ia64/include/asm/xor.h b/arch/ia64/include/asm/xor.h
new file mode 100644
index 000000000000..a349e23dea15
--- /dev/null
+++ b/arch/ia64/include/asm/xor.h
@@ -0,0 +1,31 @@
+/*
+ * Optimized RAID-5 checksumming functions for IA-64.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+
+extern void xor_ia64_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_ia64_3(unsigned long, unsigned long *, unsigned long *,
+		       unsigned long *);
+extern void xor_ia64_4(unsigned long, unsigned long *, unsigned long *,
+		       unsigned long *, unsigned long *);
+extern void xor_ia64_5(unsigned long, unsigned long *, unsigned long *,
+		       unsigned long *, unsigned long *, unsigned long *);
+
+static struct xor_block_template xor_block_ia64 = {
+	.name =	"ia64",
+	.do_2 =	xor_ia64_2,
+	.do_3 =	xor_ia64_3,
+	.do_4 =	xor_ia64_4,
+	.do_5 =	xor_ia64_5,
+};
+
+#define XOR_TRY_TEMPLATES	xor_speed(&xor_block_ia64)
diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile
index 13fd10e8699e..87fea11aecb7 100644
--- a/arch/ia64/kernel/Makefile
+++ b/arch/ia64/kernel/Makefile
@@ -36,6 +36,8 @@ obj-$(CONFIG_PCI_MSI)		+= msi_ia64.o
 mca_recovery-y			+= mca_drv.o mca_drv_asm.o
 obj-$(CONFIG_IA64_MC_ERR_INJECT)+= err_inject.o
 
+obj-$(CONFIG_PARAVIRT)		+= paravirt.o paravirtentry.o
+
 obj-$(CONFIG_IA64_ESI)		+= esi.o
 ifneq ($(CONFIG_IA64_ESI),)
 obj-y				+= esi_stub.o	# must be in kernel proper
@@ -70,3 +72,45 @@ $(obj)/gate-syms.o: $(obj)/gate.lds $(obj)/gate.o FORCE
 # We must build gate.so before we can assemble it.
 # Note: kbuild does not track this dependency due to usage of .incbin
 $(obj)/gate-data.o: $(obj)/gate.so
+
+# Calculate NR_IRQ = max(IA64_NATIVE_NR_IRQS, XEN_NR_IRQS, ...) based on config
+define sed-y
+	"/^->/{s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; s:->::; p;}"
+endef
+quiet_cmd_nr_irqs = GEN     $@
+define cmd_nr_irqs
+	(set -e; \
+	 echo "#ifndef __ASM_NR_IRQS_H__"; \
+	 echo "#define __ASM_NR_IRQS_H__"; \
+	 echo "/*"; \
+	 echo " * DO NOT MODIFY."; \
+	 echo " *"; \
+	 echo " * This file was generated by Kbuild"; \
+	 echo " *"; \
+	 echo " */"; \
+	 echo ""; \
+	 sed -ne $(sed-y) $<; \
+	 echo ""; \
+	 echo "#endif" ) > $@
+endef
+
+# We use internal kbuild rules to avoid the "is up to date" message from make
+arch/$(SRCARCH)/kernel/nr-irqs.s: $(srctree)/arch/$(SRCARCH)/kernel/nr-irqs.c \
+				$(wildcard $(srctree)/include/asm-ia64/*/irq.h)
+	$(Q)mkdir -p $(dir $@)
+	$(call if_changed_dep,cc_s_c)
+
+include/asm-ia64/nr-irqs.h: arch/$(SRCARCH)/kernel/nr-irqs.s
+	$(Q)mkdir -p $(dir $@)
+	$(call cmd,nr_irqs)
+
+clean-files += $(objtree)/include/asm-ia64/nr-irqs.h
+
+#
+# native ivt.S and entry.S
+#
+ASM_PARAVIRT_OBJS = ivt.o entry.o
+define paravirtualized_native
+AFLAGS_$(1) += -D__IA64_ASM_PARAVIRTUALIZED_NATIVE
+endef
+$(foreach obj,$(ASM_PARAVIRT_OBJS),$(eval $(call paravirtualized_native,$(obj))))
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 43687cc60dfb..5d1eb7ee2bf6 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -774,7 +774,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
  */
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
 static
-int acpi_map_cpu2node(acpi_handle handle, int cpu, long physid)
+int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 {
 #ifdef CONFIG_ACPI_NUMA
 	int pxm_id;
@@ -854,8 +854,7 @@ int acpi_map_lsapic(acpi_handle handle, int *pcpu)
 	union acpi_object *obj;
 	struct acpi_madt_local_sapic *lsapic;
 	cpumask_t tmp_map;
-	long physid;
-	int cpu;
+	int cpu, physid;
 
 	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
 		return -EINVAL;
diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c
index c64a55af9b95..94c44b1ccfd0 100644
--- a/arch/ia64/kernel/asm-offsets.c
+++ b/arch/ia64/kernel/asm-offsets.c
@@ -10,11 +10,11 @@
 #include <linux/pid.h>
 #include <linux/clocksource.h>
 #include <linux/kbuild.h>
-#include <asm-ia64/processor.h>
-#include <asm-ia64/ptrace.h>
-#include <asm-ia64/siginfo.h>
-#include <asm-ia64/sigcontext.h>
-#include <asm-ia64/mca.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/siginfo.h>
+#include <asm/sigcontext.h>
+#include <asm/mca.h>
 
 #include "../kernel/sigframe.h"
 #include "../kernel/fsyscall_gtod_data.h"
diff --git a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
index b8498ea62068..7b435451b3dc 100644
--- a/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
+++ b/arch/ia64/kernel/cpufreq/acpi-cpufreq.c
@@ -51,7 +51,7 @@ processor_set_pstate (
 	retval = ia64_pal_set_pstate((u64)value);
 
 	if (retval) {
-		dprintk("Failed to set freq to 0x%x, with error 0x%x\n",
+		dprintk("Failed to set freq to 0x%x, with error 0x%lx\n",
 		        value, retval);
 		return -ENODEV;
 	}
@@ -74,7 +74,7 @@ processor_get_pstate (
 
 	if (retval)
 		dprintk("Failed to get current freq with "
-		        "error 0x%x, idx 0x%x\n", retval, *value);
+			"error 0x%lx, idx 0x%x\n", retval, *value);
 
 	return (int)retval;
 }
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index ca2bb95726de..0dd6c1419d8d 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -23,6 +23,11 @@
  * 11/07/2000
  */
 /*
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *                    pv_ops.
+ */
+/*
  * Global (preserved) predicate usage on syscall entry/exit path:
  *
  *	pKStk:		See entry.h.
@@ -45,6 +50,7 @@
 
 #include "minstate.h"
 
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 	/*
 	 * execve() is special because in case of success, we need to
 	 * setup a null register window frame.
@@ -173,6 +179,7 @@ GLOBAL_ENTRY(sys_clone)
 	mov rp=loc0
 	br.ret.sptk.many rp
 END(sys_clone)
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
 
 /*
  * prev_task <- ia64_switch_to(struct task_struct *next)
@@ -180,7 +187,7 @@ END(sys_clone)
  *	called.  The code starting at .map relies on this.  The rest of the code
  *	doesn't care about the interrupt masking status.
  */
-GLOBAL_ENTRY(ia64_switch_to)
+GLOBAL_ENTRY(__paravirt_switch_to)
 	.prologue
 	alloc r16=ar.pfs,1,0,0,0
 	DO_SAVE_SWITCH_STACK
@@ -204,7 +211,7 @@ GLOBAL_ENTRY(ia64_switch_to)
 	;;
 .done:
 	ld8 sp=[r21]			// load kernel stack pointer of new task
-	mov IA64_KR(CURRENT)=in0	// update "current" application register
+	MOV_TO_KR(CURRENT, in0, r8, r9)		// update "current" application register
 	mov r8=r13			// return pointer to previously running task
 	mov r13=in0			// set "current" pointer
 	;;
@@ -216,26 +223,25 @@ GLOBAL_ENTRY(ia64_switch_to)
 	br.ret.sptk.many rp		// boogie on out in new context
 
 .map:
-	rsm psr.ic			// interrupts (psr.i) are already disabled here
+	RSM_PSR_IC(r25)			// interrupts (psr.i) are already disabled here
 	movl r25=PAGE_KERNEL
 	;;
 	srlz.d
 	or r23=r25,r20			// construct PA | page properties
 	mov r25=IA64_GRANULE_SHIFT<<2
 	;;
-	mov cr.itir=r25
-	mov cr.ifa=in0			// VA of next task...
+	MOV_TO_ITIR(p0, r25, r8)
+	MOV_TO_IFA(in0, r8)		// VA of next task...
 	;;
 	mov r25=IA64_TR_CURRENT_STACK
-	mov IA64_KR(CURRENT_STACK)=r26	// remember last page we mapped...
+	MOV_TO_KR(CURRENT_STACK, r26, r8, r9)	// remember last page we mapped...
 	;;
 	itr.d dtr[r25]=r23		// wire in new mapping...
-	ssm psr.ic			// reenable the psr.ic bit
-	;;
-	srlz.d
+	SSM_PSR_IC_AND_SRLZ_D(r8, r9)	// reenable the psr.ic bit
 	br.cond.sptk .done
-END(ia64_switch_to)
+END(__paravirt_switch_to)
 
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 /*
  * Note that interrupts are enabled during save_switch_stack and load_switch_stack.  This
  * means that we may get an interrupt with "sp" pointing to the new kernel stack while
@@ -375,7 +381,7 @@ END(save_switch_stack)
  *	- b7 holds address to return to
  *	- must not touch r8-r11
  */
-ENTRY(load_switch_stack)
+GLOBAL_ENTRY(load_switch_stack)
 	.prologue
 	.altrp b7
 
@@ -571,7 +577,7 @@ GLOBAL_ENTRY(ia64_trace_syscall)
 .ret3:
 (pUStk)	cmp.eq.unc p6,p0=r0,r0			// p6 <- pUStk
 (pUStk)	rsm psr.i				// disable interrupts
-	br.cond.sptk .work_pending_syscall_end
+	br.cond.sptk ia64_work_pending_syscall_end
 
 strace_error:
 	ld8 r3=[r2]				// load pt_regs.r8
@@ -636,8 +642,17 @@ GLOBAL_ENTRY(ia64_ret_from_syscall)
 	adds r2=PT(R8)+16,sp			// r2 = &pt_regs.r8
 	mov r10=r0				// clear error indication in r10
 (p7)	br.cond.spnt handle_syscall_error	// handle potential syscall failure
+#ifdef CONFIG_PARAVIRT
+	;;
+	br.cond.sptk.few ia64_leave_syscall
+	;;
+#endif /* CONFIG_PARAVIRT */
 END(ia64_ret_from_syscall)
+#ifndef CONFIG_PARAVIRT
 	// fall through
+#endif
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
+
 /*
  * ia64_leave_syscall(): Same as ia64_leave_kernel, except that it doesn't
  *	need to switch to bank 0 and doesn't restore the scratch registers.
@@ -682,7 +697,7 @@ END(ia64_ret_from_syscall)
  *	      ar.csd: cleared
  *	      ar.ssd: cleared
  */
-ENTRY(ia64_leave_syscall)
+GLOBAL_ENTRY(__paravirt_leave_syscall)
 	PT_REGS_UNWIND_INFO(0)
 	/*
 	 * work.need_resched etc. mustn't get changed by this CPU before it returns to
@@ -692,11 +707,11 @@ ENTRY(ia64_leave_syscall)
 	 * extra work.  We always check for extra work when returning to user-level.
 	 * With CONFIG_PREEMPT, we also check for extra work when the preempt_count
 	 * is 0.  After extra work processing has been completed, execution
-	 * resumes at .work_processed_syscall with p6 set to 1 if the extra-work-check
+	 * resumes at ia64_work_processed_syscall with p6 set to 1 if the extra-work-check
 	 * needs to be redone.
 	 */
 #ifdef CONFIG_PREEMPT
-	rsm psr.i				// disable interrupts
+	RSM_PSR_I(p0, r2, r18)			// disable interrupts
 	cmp.eq pLvSys,p0=r0,r0			// pLvSys=1: leave from syscall
 (pKStk) adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
 	;;
@@ -706,11 +721,12 @@ ENTRY(ia64_leave_syscall)
 	;;
 	cmp.eq p6,p0=r21,r0		// p6 <- pUStk || (preempt_count == 0)
 #else /* !CONFIG_PREEMPT */
-(pUStk)	rsm psr.i
+	RSM_PSR_I(pUStk, r2, r18)
 	cmp.eq pLvSys,p0=r0,r0		// pLvSys=1: leave from syscall
 (pUStk)	cmp.eq.unc p6,p0=r0,r0		// p6 <- pUStk
 #endif
-.work_processed_syscall:
+.global __paravirt_work_processed_syscall;
+__paravirt_work_processed_syscall:
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	adds r2=PT(LOADRS)+16,r12
 (pUStk)	mov.m r22=ar.itc			// fetch time at leave
@@ -744,7 +760,7 @@ ENTRY(ia64_leave_syscall)
 (pNonSys) break 0		//      bug check: we shouldn't be here if pNonSys is TRUE!
 	;;
 	invala			// M0|1 invalidate ALAT
-	rsm psr.i | psr.ic	// M2   turn off interrupts and interruption collection
+	RSM_PSR_I_IC(r28, r29, r30)	// M2   turn off interrupts and interruption collection
 	cmp.eq p9,p0=r0,r0	// A    set p9 to indicate that we should restore cr.ifs
 
 	ld8 r29=[r2],16		// M0|1 load cr.ipsr
@@ -765,7 +781,7 @@ ENTRY(ia64_leave_syscall)
 	;;
 #endif
 	ld8 r26=[r2],PT(B0)-PT(AR_PFS)	// M0|1 load ar.pfs
-(pKStk)	mov r22=psr			// M2   read PSR now that interrupts are disabled
+	MOV_FROM_PSR(pKStk, r22, r21)	// M2   read PSR now that interrupts are disabled
 	nop 0
 	;;
 	ld8 r21=[r2],PT(AR_RNAT)-PT(B0) // M0|1 load b0
@@ -798,7 +814,7 @@ ENTRY(ia64_leave_syscall)
 
 	srlz.d				// M0   ensure interruption collection is off (for cover)
 	shr.u r18=r19,16		// I0|1 get byte size of existing "dirty" partition
-	cover				// B    add current frame into dirty partition & set cr.ifs
+	COVER				// B    add current frame into dirty partition & set cr.ifs
 	;;
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	mov r19=ar.bsp			// M2   get new backing store pointer
@@ -823,8 +839,9 @@ ENTRY(ia64_leave_syscall)
 	mov.m ar.ssd=r0			// M2   clear ar.ssd
 	mov f11=f0			// F    clear f11
 	br.cond.sptk.many rbs_switch	// B
-END(ia64_leave_syscall)
+END(__paravirt_leave_syscall)
 
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 #ifdef CONFIG_IA32_SUPPORT
 GLOBAL_ENTRY(ia64_ret_from_ia32_execve)
 	PT_REGS_UNWIND_INFO(0)
@@ -835,10 +852,20 @@ GLOBAL_ENTRY(ia64_ret_from_ia32_execve)
 	st8.spill [r2]=r8	// store return value in slot for r8 and set unat bit
 	.mem.offset 8,0
 	st8.spill [r3]=r0	// clear error indication in slot for r10 and set unat bit
+#ifdef CONFIG_PARAVIRT
+	;;
+	// don't fall through, ia64_leave_kernel may be #define'd
+	br.cond.sptk.few ia64_leave_kernel
+	;;
+#endif /* CONFIG_PARAVIRT */
 END(ia64_ret_from_ia32_execve)
+#ifndef CONFIG_PARAVIRT
 	// fall through
+#endif
 #endif /* CONFIG_IA32_SUPPORT */
-GLOBAL_ENTRY(ia64_leave_kernel)
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
+
+GLOBAL_ENTRY(__paravirt_leave_kernel)
 	PT_REGS_UNWIND_INFO(0)
 	/*
 	 * work.need_resched etc. mustn't get changed by this CPU before it returns to
@@ -852,7 +879,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	 * needs to be redone.
 	 */
 #ifdef CONFIG_PREEMPT
-	rsm psr.i				// disable interrupts
+	RSM_PSR_I(p0, r17, r31)			// disable interrupts
 	cmp.eq p0,pLvSys=r0,r0			// pLvSys=0: leave from kernel
 (pKStk)	adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
 	;;
@@ -862,7 +889,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	;;
 	cmp.eq p6,p0=r21,r0		// p6 <- pUStk || (preempt_count == 0)
 #else
-(pUStk)	rsm psr.i
+	RSM_PSR_I(pUStk, r17, r31)
 	cmp.eq p0,pLvSys=r0,r0		// pLvSys=0: leave from kernel
 (pUStk)	cmp.eq.unc p6,p0=r0,r0		// p6 <- pUStk
 #endif
@@ -910,7 +937,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	mov ar.csd=r30
 	mov ar.ssd=r31
 	;;
-	rsm psr.i | psr.ic	// initiate turning off of interrupt and interruption collection
+	RSM_PSR_I_IC(r23, r22, r25)	// initiate turning off of interrupt and interruption collection
 	invala			// invalidate ALAT
 	;;
 	ld8.fill r22=[r2],24
@@ -942,7 +969,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	mov ar.ccv=r15
 	;;
 	ldf.fill f11=[r2]
-	bsw.0			// switch back to bank 0 (no stop bit required beforehand...)
+	BSW_0(r2, r3, r15)	// switch back to bank 0 (no stop bit required beforehand...)
 	;;
 (pUStk)	mov r18=IA64_KR(CURRENT)// M2 (12 cycle read latency)
 	adds r16=PT(CR_IPSR)+16,r12
@@ -950,12 +977,12 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 	.pred.rel.mutex pUStk,pKStk
-(pKStk)	mov r22=psr		// M2 read PSR now that interrupts are disabled
+	MOV_FROM_PSR(pKStk, r22, r29)	// M2 read PSR now that interrupts are disabled
 (pUStk)	mov.m r22=ar.itc	// M  fetch time at leave
 	nop.i 0
 	;;
 #else
-(pKStk)	mov r22=psr		// M2 read PSR now that interrupts are disabled
+	MOV_FROM_PSR(pKStk, r22, r29)	// M2 read PSR now that interrupts are disabled
 	nop.i 0
 	nop.i 0
 	;;
@@ -1027,7 +1054,7 @@ GLOBAL_ENTRY(ia64_leave_kernel)
 	 * NOTE: alloc, loadrs, and cover can't be predicated.
 	 */
 (pNonSys) br.cond.dpnt dont_preserve_current_frame
-	cover				// add current frame into dirty partition and set cr.ifs
+	COVER				// add current frame into dirty partition and set cr.ifs
 	;;
 	mov r19=ar.bsp			// get new backing store pointer
 rbs_switch:
@@ -1130,16 +1157,16 @@ skip_rbs_switch:
 (pKStk)	dep r29=r22,r29,21,1	// I0 update ipsr.pp with psr.pp
 (pLvSys)mov r16=r0		// A  clear r16 for leave_syscall, no-op otherwise
 	;;
-	mov cr.ipsr=r29		// M2
+	MOV_TO_IPSR(p0, r29, r25)	// M2
 	mov ar.pfs=r26		// I0
 (pLvSys)mov r17=r0		// A  clear r17 for leave_syscall, no-op otherwise
 
-(p9)	mov cr.ifs=r30		// M2
+	MOV_TO_IFS(p9, r30, r25)// M2
 	mov b0=r21		// I0
 (pLvSys)mov r18=r0		// A  clear r18 for leave_syscall, no-op otherwise
 
 	mov ar.fpsr=r20		// M2
-	mov cr.iip=r28		// M2
+	MOV_TO_IIP(r28, r25)	// M2
 	nop 0
 	;;
 (pUStk)	mov ar.rnat=r24		// M2 must happen with RSE in lazy mode
@@ -1148,7 +1175,7 @@ skip_rbs_switch:
 
 	mov ar.rsc=r27		// M2
 	mov pr=r31,-1		// I0
-	rfi			// B
+	RFI			// B
 
 	/*
 	 * On entry:
@@ -1174,35 +1201,36 @@ skip_rbs_switch:
 	;;
 (pKStk) st4 [r20]=r21
 #endif
-	ssm psr.i		// enable interrupts
+	SSM_PSR_I(p0, p6, r2)	// enable interrupts
 	br.call.spnt.many rp=schedule
 .ret9:	cmp.eq p6,p0=r0,r0	// p6 <- 1 (re-check)
-	rsm psr.i		// disable interrupts
+	RSM_PSR_I(p0, r2, r20)	// disable interrupts
 	;;
 #ifdef CONFIG_PREEMPT
 (pKStk)	adds r20=TI_PRE_COUNT+IA64_TASK_SIZE,r13
 	;;
 (pKStk)	st4 [r20]=r0		// preempt_count() <- 0
 #endif
-(pLvSys)br.cond.sptk.few  .work_pending_syscall_end
+(pLvSys)br.cond.sptk.few  __paravirt_pending_syscall_end
 	br.cond.sptk.many .work_processed_kernel
 
 .notify:
 (pUStk)	br.call.spnt.many rp=notify_resume_user
 .ret10:	cmp.ne p6,p0=r0,r0	// p6 <- 0 (don't re-check)
-(pLvSys)br.cond.sptk.few  .work_pending_syscall_end
+(pLvSys)br.cond.sptk.few  __paravirt_pending_syscall_end
 	br.cond.sptk.many .work_processed_kernel
 
-.work_pending_syscall_end:
+.global __paravirt_pending_syscall_end;
+__paravirt_pending_syscall_end:
 	adds r2=PT(R8)+16,r12
 	adds r3=PT(R10)+16,r12
 	;;
 	ld8 r8=[r2]
 	ld8 r10=[r3]
-	br.cond.sptk.many .work_processed_syscall
-
-END(ia64_leave_kernel)
+	br.cond.sptk.many __paravirt_work_processed_syscall_target
+END(__paravirt_leave_kernel)
 
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 ENTRY(handle_syscall_error)
 	/*
 	 * Some system calls (e.g., ptrace, mmap) can return arbitrary values which could
@@ -1244,7 +1272,7 @@ END(ia64_invoke_schedule_tail)
 	 * We declare 8 input registers so the system call args get preserved,
 	 * in case we need to restart a system call.
 	 */
-ENTRY(notify_resume_user)
+GLOBAL_ENTRY(notify_resume_user)
 	.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
 	alloc loc1=ar.pfs,8,2,3,0 // preserve all eight input regs in case of syscall restart!
 	mov r9=ar.unat
@@ -1306,7 +1334,7 @@ ENTRY(sys_rt_sigreturn)
 	adds sp=16,sp
 	;;
 	ld8 r9=[sp]				// load new ar.unat
-	mov.sptk b7=r8,ia64_leave_kernel
+	mov.sptk b7=r8,ia64_native_leave_kernel
 	;;
 	mov ar.unat=r9
 	br.many b7
@@ -1663,5 +1691,12 @@ sys_call_table:
 	data8 sys_timerfd_create		// 1310
 	data8 sys_timerfd_settime
 	data8 sys_timerfd_gettime
+	data8 sys_signalfd4
+	data8 sys_eventfd2
+	data8 sys_epoll_create1			// 1315
+	data8 sys_dup3
+	data8 sys_pipe2
+	data8 sys_inotify_init1
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/arch/ia64/kernel/err_inject.c b/arch/ia64/kernel/err_inject.c
index b642648cc2ac..c539c689493b 100644
--- a/arch/ia64/kernel/err_inject.c
+++ b/arch/ia64/kernel/err_inject.c
@@ -55,7 +55,8 @@ static u64 resources[NR_CPUS];
 
 #define show(name) 							\
 static ssize_t 								\
-show_##name(struct sys_device *dev, char *buf)				\
+show_##name(struct sys_device *dev, struct sysdev_attribute *attr,	\
+		char *buf)						\
 {									\
 	u32 cpu=dev->id;						\
 	return sprintf(buf, "%lx\n", name[cpu]);			\
@@ -63,7 +64,8 @@ show_##name(struct sys_device *dev, char *buf)				\
 
 #define store(name)							\
 static ssize_t 								\
-store_##name(struct sys_device *dev, const char *buf, size_t size)	\
+store_##name(struct sys_device *dev, struct sysdev_attribute *attr,	\
+					const char *buf, size_t size)	\
 {									\
 	unsigned int cpu=dev->id;					\
 	name[cpu] = simple_strtoull(buf, NULL, 16);			\
@@ -76,7 +78,8 @@ show(call_start)
  * processor. The cpu number in driver is only used for storing data.
  */
 static ssize_t
-store_call_start(struct sys_device *dev, const char *buf, size_t size)
+store_call_start(struct sys_device *dev, struct sysdev_attribute *attr,
+		const char *buf, size_t size)
 {
 	unsigned int cpu=dev->id;
 	unsigned long call_start = simple_strtoull(buf, NULL, 16);
@@ -124,14 +127,16 @@ show(err_type_info)
 store(err_type_info)
 
 static ssize_t
-show_virtual_to_phys(struct sys_device *dev, char *buf)
+show_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr,
+			char *buf)
 {
 	unsigned int cpu=dev->id;
 	return sprintf(buf, "%lx\n", phys_addr[cpu]);
 }
 
 static ssize_t
-store_virtual_to_phys(struct sys_device *dev, const char *buf, size_t size)
+store_virtual_to_phys(struct sys_device *dev, struct sysdev_attribute *attr,
+			const char *buf, size_t size)
 {
 	unsigned int cpu=dev->id;
 	u64 virt_addr=simple_strtoull(buf, NULL, 16);
@@ -154,7 +159,8 @@ show(err_struct_info)
 store(err_struct_info)
 
 static ssize_t
-show_err_data_buffer(struct sys_device *dev, char *buf)
+show_err_data_buffer(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	unsigned int cpu=dev->id;
 
@@ -165,7 +171,9 @@ show_err_data_buffer(struct sys_device *dev, char *buf)
 }
 
 static ssize_t
-store_err_data_buffer(struct sys_device *dev, const char *buf, size_t size)
+store_err_data_buffer(struct sys_device *dev,
+			struct sysdev_attribute *attr,
+			const char *buf, size_t size)
 {
 	unsigned int cpu=dev->id;
 	int ret;
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index ddeab4e36fd5..41c712917ff7 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -26,11 +26,14 @@
 #include <asm/mmu_context.h>
 #include <asm/asm-offsets.h>
 #include <asm/pal.h>
+#include <asm/paravirt.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
 #include <asm/ptrace.h>
 #include <asm/system.h>
 #include <asm/mca_asm.h>
+#include <linux/init.h>
+#include <linux/linkage.h>
 
 #ifdef CONFIG_HOTPLUG_CPU
 #define SAL_PSR_BITS_TO_SET				\
@@ -367,6 +370,44 @@ start_ap:
 	;;
 (isBP)	st8 [r2]=r28		// save the address of the boot param area passed by the bootloader
 
+#ifdef CONFIG_PARAVIRT
+
+	movl r14=hypervisor_setup_hooks
+	movl r15=hypervisor_type
+	mov r16=num_hypervisor_hooks
+	;;
+	ld8 r2=[r15]
+	;;
+	cmp.ltu p7,p0=r2,r16	// array size check
+	shladd r8=r2,3,r14
+	;;
+(p7)	ld8 r9=[r8]
+	;;
+(p7)	mov b1=r9
+(p7)	cmp.ne.unc p7,p0=r9,r0	// no actual branch to NULL
+	;;
+(p7)	br.call.sptk.many rp=b1
+
+	__INITDATA
+
+default_setup_hook = 0		// Currently nothing needs to be done.
+
+	.weak xen_setup_hook
+
+	.global hypervisor_type
+hypervisor_type:
+	data8		PARAVIRT_HYPERVISOR_TYPE_DEFAULT
+
+	// must have the same order with PARAVIRT_HYPERVISOR_TYPE_xxx
+
+hypervisor_setup_hooks:
+	data8		default_setup_hook
+	data8		xen_setup_hook
+num_hypervisor_hooks = (. - hypervisor_setup_hooks) / 8
+	.previous
+
+#endif
+
 #ifdef CONFIG_SMP
 (isAP)	br.call.sptk.many rp=start_secondary
 .ret0:
@@ -1082,7 +1123,7 @@ SET_REG(b5);
 	 *   p15    - used to track flag status.
 	 *
 	 * If you patch this code to use more registers, do not forget to update
-	 * the clobber lists for spin_lock() in include/asm-ia64/spinlock.h.
+	 * the clobber lists for spin_lock() in arch/ia64/include/asm/spinlock.h.
 	 */
 
 #if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c
index 39752cdef6ff..5c4674ae8aea 100644
--- a/arch/ia64/kernel/iosapic.c
+++ b/arch/ia64/kernel/iosapic.c
@@ -69,7 +69,7 @@
  *     systems, we use one-to-one mapping between IA-64 vector and IRQ.  A
  *     platform can implement platform_irq_to_vector(irq) and
  *     platform_local_vector_to_irq(vector) APIs to differentiate the mapping.
- *     Please see also include/asm-ia64/hw_irq.h for those APIs.
+ *     Please see also arch/ia64/include/asm/hw_irq.h for those APIs.
  *
  * To sum up, there are three levels of mappings involved:
  *
@@ -585,6 +585,15 @@ static inline int irq_is_shared (int irq)
 	return (iosapic_intr_info[irq].count > 1);
 }
 
+struct irq_chip*
+ia64_native_iosapic_get_irq_chip(unsigned long trigger)
+{
+	if (trigger == IOSAPIC_EDGE)
+		return &irq_type_iosapic_edge;
+	else
+		return &irq_type_iosapic_level;
+}
+
 static int
 register_intr (unsigned int gsi, int irq, unsigned char delivery,
 	       unsigned long polarity, unsigned long trigger)
@@ -635,13 +644,10 @@ register_intr (unsigned int gsi, int irq, unsigned char delivery,
 	iosapic_intr_info[irq].dmode    = delivery;
 	iosapic_intr_info[irq].trigger  = trigger;
 
-	if (trigger == IOSAPIC_EDGE)
-		irq_type = &irq_type_iosapic_edge;
-	else
-		irq_type = &irq_type_iosapic_level;
+	irq_type = iosapic_get_irq_chip(trigger);
 
 	idesc = irq_desc + irq;
-	if (idesc->chip != irq_type) {
+	if (irq_type != NULL && idesc->chip != irq_type) {
 		if (idesc->chip != &no_irq_type)
 			printk(KERN_WARNING
 			       "%s: changing vector %d from %s to %s\n",
@@ -974,6 +980,22 @@ iosapic_override_isa_irq (unsigned int isa_irq, unsigned int gsi,
 }
 
 void __init
+ia64_native_iosapic_pcat_compat_init(void)
+{
+	if (pcat_compat) {
+		/*
+		 * Disable the compatibility mode interrupts (8259 style),
+		 * needs IN/OUT support enabled.
+		 */
+		printk(KERN_INFO
+		       "%s: Disabling PC-AT compatible 8259 interrupts\n",
+		       __func__);
+		outb(0xff, 0xA1);
+		outb(0xff, 0x21);
+	}
+}
+
+void __init
 iosapic_system_init (int system_pcat_compat)
 {
 	int irq;
@@ -987,17 +1009,8 @@ iosapic_system_init (int system_pcat_compat)
 	}
 
 	pcat_compat = system_pcat_compat;
-	if (pcat_compat) {
-		/*
-		 * Disable the compatibility mode interrupts (8259 style),
-		 * needs IN/OUT support enabled.
-		 */
-		printk(KERN_INFO
-		       "%s: Disabling PC-AT compatible 8259 interrupts\n",
-		       __func__);
-		outb(0xff, 0xA1);
-		outb(0xff, 0x21);
-	}
+	if (pcat_compat)
+		iosapic_pcat_compat_init();
 }
 
 static inline int
diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c
index 5538471e8d68..28d3d483db92 100644
--- a/arch/ia64/kernel/irq_ia64.c
+++ b/arch/ia64/kernel/irq_ia64.c
@@ -196,7 +196,7 @@ static void clear_irq_vector(int irq)
 }
 
 int
-assign_irq_vector (int irq)
+ia64_native_assign_irq_vector (int irq)
 {
 	unsigned long flags;
 	int vector, cpu;
@@ -222,7 +222,7 @@ assign_irq_vector (int irq)
 }
 
 void
-free_irq_vector (int vector)
+ia64_native_free_irq_vector (int vector)
 {
 	if (vector < IA64_FIRST_DEVICE_VECTOR ||
 	    vector > IA64_LAST_DEVICE_VECTOR)
@@ -600,7 +600,6 @@ static irqreturn_t dummy_handler (int irq, void *dev_id)
 {
 	BUG();
 }
-extern irqreturn_t handle_IPI (int irq, void *dev_id);
 
 static struct irqaction ipi_irqaction = {
 	.handler =	handle_IPI,
@@ -623,7 +622,7 @@ static struct irqaction tlb_irqaction = {
 #endif
 
 void
-register_percpu_irq (ia64_vector vec, struct irqaction *action)
+ia64_native_register_percpu_irq (ia64_vector vec, struct irqaction *action)
 {
 	irq_desc_t *desc;
 	unsigned int irq;
@@ -638,13 +637,21 @@ register_percpu_irq (ia64_vector vec, struct irqaction *action)
 }
 
 void __init
-init_IRQ (void)
+ia64_native_register_ipi(void)
 {
-	register_percpu_irq(IA64_SPURIOUS_INT_VECTOR, NULL);
 #ifdef CONFIG_SMP
 	register_percpu_irq(IA64_IPI_VECTOR, &ipi_irqaction);
 	register_percpu_irq(IA64_IPI_RESCHEDULE, &resched_irqaction);
 	register_percpu_irq(IA64_IPI_LOCAL_TLB_FLUSH, &tlb_irqaction);
+#endif
+}
+
+void __init
+init_IRQ (void)
+{
+	ia64_register_ipi();
+	register_percpu_irq(IA64_SPURIOUS_INT_VECTOR, NULL);
+#ifdef CONFIG_SMP
 #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_DIG)
 	if (vector_domain_type != VECTOR_DOMAIN_NONE) {
 		BUG_ON(IA64_FIRST_DEVICE_VECTOR != IA64_IRQ_MOVE_VECTOR);
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 80b44ea052d7..c39627df3cde 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -12,6 +12,14 @@
  *
  * 00/08/23 Asit Mallick <asit.k.mallick@intel.com> TLB handling for SMP
  * 00/12/20 David Mosberger-Tang <davidm@hpl.hp.com> DTLB/ITLB handler now uses virtual PT.
+ *
+ * Copyright (C) 2005 Hewlett-Packard Co
+ *	Dan Magenheimer <dan.magenheimer@hp.com>
+ *      Xen paravirtualization
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *                    pv_ops.
+ *      Yaozu (Eddie) Dong <eddie.dong@intel.com>
  */
 /*
  * This file defines the interruption vector table used by the CPU.
@@ -102,13 +110,13 @@ ENTRY(vhpt_miss)
 	 *	- the faulting virtual address uses unimplemented address bits
 	 *	- the faulting virtual address has no valid page table mapping
 	 */
-	mov r16=cr.ifa				// get address that caused the TLB miss
+	MOV_FROM_IFA(r16)			// get address that caused the TLB miss
 #ifdef CONFIG_HUGETLB_PAGE
 	movl r18=PAGE_SHIFT
-	mov r25=cr.itir
+	MOV_FROM_ITIR(r25)
 #endif
 	;;
-	rsm psr.dt				// use physical addressing for data
+	RSM_PSR_DT				// use physical addressing for data
 	mov r31=pr				// save the predicate registers
 	mov r19=IA64_KR(PT_BASE)		// get page table base address
 	shl r21=r16,3				// shift bit 60 into sign bit
@@ -168,21 +176,21 @@ ENTRY(vhpt_miss)
 	dep r21=r19,r20,3,(PAGE_SHIFT-3)	// r21=pte_offset(pmd,addr)
 	;;
 (p7)	ld8 r18=[r21]				// read *pte
-	mov r19=cr.isr				// cr.isr bit 32 tells us if this is an insn miss
+	MOV_FROM_ISR(r19)			// cr.isr bit 32 tells us if this is an insn miss
 	;;
 (p7)	tbit.z p6,p7=r18,_PAGE_P_BIT		// page present bit cleared?
-	mov r22=cr.iha				// get the VHPT address that caused the TLB miss
+	MOV_FROM_IHA(r22)			// get the VHPT address that caused the TLB miss
 	;;					// avoid RAW on p7
 (p7)	tbit.nz.unc p10,p11=r19,32		// is it an instruction TLB miss?
 	dep r23=0,r20,0,PAGE_SHIFT		// clear low bits to get page address
 	;;
-(p10)	itc.i r18				// insert the instruction TLB entry
-(p11)	itc.d r18				// insert the data TLB entry
+	ITC_I_AND_D(p10, p11, r18, r24)		// insert the instruction TLB entry and
+						// insert the data TLB entry
 (p6)	br.cond.spnt.many page_fault		// handle bad address/page not present (page fault)
-	mov cr.ifa=r22
+	MOV_TO_IFA(r22, r24)
 
 #ifdef CONFIG_HUGETLB_PAGE
-(p8)	mov cr.itir=r25				// change to default page-size for VHPT
+	MOV_TO_ITIR(p8, r25, r24)		// change to default page-size for VHPT
 #endif
 
 	/*
@@ -192,7 +200,7 @@ ENTRY(vhpt_miss)
 	 */
 	adds r24=__DIRTY_BITS_NO_ED|_PAGE_PL_0|_PAGE_AR_RW,r23
 	;;
-(p7)	itc.d r24
+	ITC_D(p7, r24, r25)
 	;;
 #ifdef CONFIG_SMP
 	/*
@@ -234,7 +242,7 @@ ENTRY(vhpt_miss)
 #endif
 
 	mov pr=r31,-1				// restore predicate registers
-	rfi
+	RFI
 END(vhpt_miss)
 
 	.org ia64_ivt+0x400
@@ -248,11 +256,11 @@ ENTRY(itlb_miss)
 	 * mode, walk the page table, and then re-execute the PTE read and
 	 * go on normally after that.
 	 */
-	mov r16=cr.ifa				// get virtual address
+	MOV_FROM_IFA(r16)			// get virtual address
 	mov r29=b0				// save b0
 	mov r31=pr				// save predicates
 .itlb_fault:
-	mov r17=cr.iha				// get virtual address of PTE
+	MOV_FROM_IHA(r17)			// get virtual address of PTE
 	movl r30=1f				// load nested fault continuation point
 	;;
 1:	ld8 r18=[r17]				// read *pte
@@ -261,7 +269,7 @@ ENTRY(itlb_miss)
 	tbit.z p6,p0=r18,_PAGE_P_BIT		// page present bit cleared?
 (p6)	br.cond.spnt page_fault
 	;;
-	itc.i r18
+	ITC_I(p0, r18, r19)
 	;;
 #ifdef CONFIG_SMP
 	/*
@@ -278,7 +286,7 @@ ENTRY(itlb_miss)
 (p7)	ptc.l r16,r20
 #endif
 	mov pr=r31,-1
-	rfi
+	RFI
 END(itlb_miss)
 
 	.org ia64_ivt+0x0800
@@ -292,11 +300,11 @@ ENTRY(dtlb_miss)
 	 * mode, walk the page table, and then re-execute the PTE read and
 	 * go on normally after that.
 	 */
-	mov r16=cr.ifa				// get virtual address
+	MOV_FROM_IFA(r16)			// get virtual address
 	mov r29=b0				// save b0
 	mov r31=pr				// save predicates
 dtlb_fault:
-	mov r17=cr.iha				// get virtual address of PTE
+	MOV_FROM_IHA(r17)			// get virtual address of PTE
 	movl r30=1f				// load nested fault continuation point
 	;;
 1:	ld8 r18=[r17]				// read *pte
@@ -305,7 +313,7 @@ dtlb_fault:
 	tbit.z p6,p0=r18,_PAGE_P_BIT		// page present bit cleared?
 (p6)	br.cond.spnt page_fault
 	;;
-	itc.d r18
+	ITC_D(p0, r18, r19)
 	;;
 #ifdef CONFIG_SMP
 	/*
@@ -322,7 +330,7 @@ dtlb_fault:
 (p7)	ptc.l r16,r20
 #endif
 	mov pr=r31,-1
-	rfi
+	RFI
 END(dtlb_miss)
 
 	.org ia64_ivt+0x0c00
@@ -330,9 +338,9 @@ END(dtlb_miss)
 // 0x0c00 Entry 3 (size 64 bundles) Alt ITLB (19)
 ENTRY(alt_itlb_miss)
 	DBG_FAULT(3)
-	mov r16=cr.ifa		// get address that caused the TLB miss
+	MOV_FROM_IFA(r16)	// get address that caused the TLB miss
 	movl r17=PAGE_KERNEL
-	mov r21=cr.ipsr
+	MOV_FROM_IPSR(p0, r21)
 	movl r19=(((1 << IA64_MAX_PHYS_BITS) - 1) & ~0xfff)
 	mov r31=pr
 	;;
@@ -341,9 +349,9 @@ ENTRY(alt_itlb_miss)
 	;;
 	cmp.gt p8,p0=6,r22			// user mode
 	;;
-(p8)	thash r17=r16
+	THASH(p8, r17, r16, r23)
 	;;
-(p8)	mov cr.iha=r17
+	MOV_TO_IHA(p8, r17, r23)
 (p8)	mov r29=b0				// save b0
 (p8)	br.cond.dptk .itlb_fault
 #endif
@@ -358,9 +366,9 @@ ENTRY(alt_itlb_miss)
 	or r19=r19,r18		// set bit 4 (uncached) if the access was to region 6
 (p8)	br.cond.spnt page_fault
 	;;
-	itc.i r19		// insert the TLB entry
+	ITC_I(p0, r19, r18)	// insert the TLB entry
 	mov pr=r31,-1
-	rfi
+	RFI
 END(alt_itlb_miss)
 
 	.org ia64_ivt+0x1000
@@ -368,11 +376,11 @@ END(alt_itlb_miss)
 // 0x1000 Entry 4 (size 64 bundles) Alt DTLB (7,46)
 ENTRY(alt_dtlb_miss)
 	DBG_FAULT(4)
-	mov r16=cr.ifa		// get address that caused the TLB miss
+	MOV_FROM_IFA(r16)	// get address that caused the TLB miss
 	movl r17=PAGE_KERNEL
-	mov r20=cr.isr
+	MOV_FROM_ISR(r20)
 	movl r19=(((1 << IA64_MAX_PHYS_BITS) - 1) & ~0xfff)
-	mov r21=cr.ipsr
+	MOV_FROM_IPSR(p0, r21)
 	mov r31=pr
 	mov r24=PERCPU_ADDR
 	;;
@@ -381,9 +389,9 @@ ENTRY(alt_dtlb_miss)
 	;;
 	cmp.gt p8,p0=6,r22			// access to region 0-5
 	;;
-(p8)	thash r17=r16
+	THASH(p8, r17, r16, r25)
 	;;
-(p8)	mov cr.iha=r17
+	MOV_TO_IHA(p8, r17, r25)
 (p8)	mov r29=b0				// save b0
 (p8)	br.cond.dptk dtlb_fault
 #endif
@@ -402,7 +410,7 @@ ENTRY(alt_dtlb_miss)
 	tbit.nz p9,p0=r20,IA64_ISR_NA_BIT	// is non-access bit on?
 	;;
 (p10)	sub r19=r19,r26
-(p10)	mov cr.itir=r25
+	MOV_TO_ITIR(p10, r25, r24)
 	cmp.ne p8,p0=r0,r23
 (p9)	cmp.eq.or.andcm p6,p7=IA64_ISR_CODE_LFETCH,r22	// check isr.code field
 (p12)	dep r17=-1,r17,4,1			// set ma=UC for region 6 addr
@@ -411,11 +419,11 @@ ENTRY(alt_dtlb_miss)
 	dep r21=-1,r21,IA64_PSR_ED_BIT,1
 	;;
 	or r19=r19,r17		// insert PTE control bits into r19
-(p6)	mov cr.ipsr=r21
+	MOV_TO_IPSR(p6, r21, r24)
 	;;
-(p7)	itc.d r19		// insert the TLB entry
+	ITC_D(p7, r19, r18)	// insert the TLB entry
 	mov pr=r31,-1
-	rfi
+	RFI
 END(alt_dtlb_miss)
 
 	.org ia64_ivt+0x1400
@@ -444,10 +452,10 @@ ENTRY(nested_dtlb_miss)
 	 *
 	 * Clobbered:	b0, r18, r19, r21, r22, psr.dt (cleared)
 	 */
-	rsm psr.dt				// switch to using physical data addressing
+	RSM_PSR_DT				// switch to using physical data addressing
 	mov r19=IA64_KR(PT_BASE)		// get the page table base address
 	shl r21=r16,3				// shift bit 60 into sign bit
-	mov r18=cr.itir
+	MOV_FROM_ITIR(r18)
 	;;
 	shr.u r17=r16,61			// get the region number into r17
 	extr.u r18=r18,2,6			// get the faulting page size
@@ -507,33 +515,6 @@ ENTRY(ikey_miss)
 	FAULT(6)
 END(ikey_miss)
 
-	//-----------------------------------------------------------------------------------
-	// call do_page_fault (predicates are in r31, psr.dt may be off, r16 is faulting address)
-ENTRY(page_fault)
-	ssm psr.dt
-	;;
-	srlz.i
-	;;
-	SAVE_MIN_WITH_COVER
-	alloc r15=ar.pfs,0,0,3,0
-	mov out0=cr.ifa
-	mov out1=cr.isr
-	adds r3=8,r2				// set up second base pointer
-	;;
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i					// guarantee that interruption collectin is on
-	;;
-(p15)	ssm psr.i				// restore psr.i
-	movl r14=ia64_leave_kernel
-	;;
-	SAVE_REST
-	mov rp=r14
-	;;
-	adds out2=16,r12			// out2 = pointer to pt_regs
-	br.call.sptk.many b6=ia64_do_page_fault	// ignore return address
-END(page_fault)
-
 	.org ia64_ivt+0x1c00
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x1c00 Entry 7 (size 64 bundles) Data Key Miss (12,51)
@@ -556,10 +537,10 @@ ENTRY(dirty_bit)
 	 * page table TLB entry isn't present, we take a nested TLB miss hit where we look
 	 * up the physical address of the L3 PTE and then continue at label 1 below.
 	 */
-	mov r16=cr.ifa				// get the address that caused the fault
+	MOV_FROM_IFA(r16)			// get the address that caused the fault
 	movl r30=1f				// load continuation point in case of nested fault
 	;;
-	thash r17=r16				// compute virtual address of L3 PTE
+	THASH(p0, r17, r16, r18)		// compute virtual address of L3 PTE
 	mov r29=b0				// save b0 in case of nested fault
 	mov r31=pr				// save pr
 #ifdef CONFIG_SMP
@@ -576,7 +557,7 @@ ENTRY(dirty_bit)
 	;;
 (p6)	cmp.eq p6,p7=r26,r18			// Only compare if page is present
 	;;
-(p6)	itc.d r25				// install updated PTE
+	ITC_D(p6, r25, r18)			// install updated PTE
 	;;
 	/*
 	 * Tell the assemblers dependency-violation checker that the above "itc" instructions
@@ -602,7 +583,7 @@ ENTRY(dirty_bit)
 	itc.d r18				// install updated PTE
 #endif
 	mov pr=r31,-1				// restore pr
-	rfi
+	RFI
 END(dirty_bit)
 
 	.org ia64_ivt+0x2400
@@ -611,22 +592,22 @@ END(dirty_bit)
 ENTRY(iaccess_bit)
 	DBG_FAULT(9)
 	// Like Entry 8, except for instruction access
-	mov r16=cr.ifa				// get the address that caused the fault
+	MOV_FROM_IFA(r16)			// get the address that caused the fault
 	movl r30=1f				// load continuation point in case of nested fault
 	mov r31=pr				// save predicates
 #ifdef CONFIG_ITANIUM
 	/*
 	 * Erratum 10 (IFA may contain incorrect address) has "NoFix" status.
 	 */
-	mov r17=cr.ipsr
+	MOV_FROM_IPSR(p0, r17)
 	;;
-	mov r18=cr.iip
+	MOV_FROM_IIP(r18)
 	tbit.z p6,p0=r17,IA64_PSR_IS_BIT	// IA64 instruction set?
 	;;
 (p6)	mov r16=r18				// if so, use cr.iip instead of cr.ifa
 #endif /* CONFIG_ITANIUM */
 	;;
-	thash r17=r16				// compute virtual address of L3 PTE
+	THASH(p0, r17, r16, r18)		// compute virtual address of L3 PTE
 	mov r29=b0				// save b0 in case of nested fault)
 #ifdef CONFIG_SMP
 	mov r28=ar.ccv				// save ar.ccv
@@ -642,7 +623,7 @@ ENTRY(iaccess_bit)
 	;;
 (p6)	cmp.eq p6,p7=r26,r18			// Only if page present
 	;;
-(p6)	itc.i r25				// install updated PTE
+	ITC_I(p6, r25, r26)			// install updated PTE
 	;;
 	/*
 	 * Tell the assemblers dependency-violation checker that the above "itc" instructions
@@ -668,7 +649,7 @@ ENTRY(iaccess_bit)
 	itc.i r18				// install updated PTE
 #endif /* !CONFIG_SMP */
 	mov pr=r31,-1
-	rfi
+	RFI
 END(iaccess_bit)
 
 	.org ia64_ivt+0x2800
@@ -677,10 +658,10 @@ END(iaccess_bit)
 ENTRY(daccess_bit)
 	DBG_FAULT(10)
 	// Like Entry 8, except for data access
-	mov r16=cr.ifa				// get the address that caused the fault
+	MOV_FROM_IFA(r16)			// get the address that caused the fault
 	movl r30=1f				// load continuation point in case of nested fault
 	;;
-	thash r17=r16				// compute virtual address of L3 PTE
+	THASH(p0, r17, r16, r18)		// compute virtual address of L3 PTE
 	mov r31=pr
 	mov r29=b0				// save b0 in case of nested fault)
 #ifdef CONFIG_SMP
@@ -697,7 +678,7 @@ ENTRY(daccess_bit)
 	;;
 (p6)	cmp.eq p6,p7=r26,r18			// Only if page is present
 	;;
-(p6)	itc.d r25				// install updated PTE
+	ITC_D(p6, r25, r26)			// install updated PTE
 	/*
 	 * Tell the assemblers dependency-violation checker that the above "itc" instructions
 	 * cannot possibly affect the following loads:
@@ -721,7 +702,7 @@ ENTRY(daccess_bit)
 #endif
 	mov b0=r29				// restore b0
 	mov pr=r31,-1
-	rfi
+	RFI
 END(daccess_bit)
 
 	.org ia64_ivt+0x2c00
@@ -745,10 +726,10 @@ ENTRY(break_fault)
 	 */
 	DBG_FAULT(11)
 	mov.m r16=IA64_KR(CURRENT)		// M2 r16 <- current task (12 cyc)
-	mov r29=cr.ipsr				// M2 (12 cyc)
+	MOV_FROM_IPSR(p0, r29)			// M2 (12 cyc)
 	mov r31=pr				// I0 (2 cyc)
 
-	mov r17=cr.iim				// M2 (2 cyc)
+	MOV_FROM_IIM(r17)			// M2 (2 cyc)
 	mov.m r27=ar.rsc			// M2 (12 cyc)
 	mov r18=__IA64_BREAK_SYSCALL		// A
 
@@ -767,7 +748,7 @@ ENTRY(break_fault)
 	nop.m 0
 	movl r30=sys_call_table			// X
 
-	mov r28=cr.iip				// M2 (2 cyc)
+	MOV_FROM_IIP(r28)			// M2 (2 cyc)
 	cmp.eq p0,p7=r18,r17			// I0 is this a system call?
 (p7)	br.cond.spnt non_syscall		// B  no ->
 	//
@@ -864,18 +845,17 @@ ENTRY(break_fault)
 #endif
 	mov ar.rsc=0x3				// M2   set eager mode, pl 0, LE, loadrs=0
 	nop 0
-	bsw.1					// B (6 cyc) regs are saved, switch to bank 1
+	BSW_1(r2, r14)				// B (6 cyc) regs are saved, switch to bank 1
 	;;
 
-	ssm psr.ic | PSR_DEFAULT_BITS		// M2	now it's safe to re-enable intr.-collection
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r16)	// M2	now it's safe to re-enable intr.-collection
+						// M0   ensure interruption collection is on
 	movl r3=ia64_ret_from_syscall		// X
 	;;
-
-	srlz.i					// M0   ensure interruption collection is on
 	mov rp=r3				// I0   set the real return addr
 (p10)	br.cond.spnt.many ia64_ret_from_syscall	// B    return if bad call-frame or r15 is a NaT
 
-(p15)	ssm psr.i				// M2   restore psr.i
+	SSM_PSR_I(p15, p15, r16)		// M2   restore psr.i
 (p14)	br.call.sptk.many b6=b6			// B    invoke syscall-handker (ignore return addr)
 	br.cond.spnt.many ia64_trace_syscall	// B	do syscall-tracing thingamagic
 	// NOT REACHED
@@ -895,27 +875,8 @@ END(break_fault)
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x3000 Entry 12 (size 64 bundles) External Interrupt (4)
 ENTRY(interrupt)
-	DBG_FAULT(12)
-	mov r31=pr		// prepare to save predicates
-	;;
-	SAVE_MIN_WITH_COVER	// uses r31; defines r2 and r3
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	adds r3=8,r2		// set up second base pointer for SAVE_REST
-	srlz.i			// ensure everybody knows psr.ic is back on
-	;;
-	SAVE_REST
-	;;
-	MCA_RECOVER_RANGE(interrupt)
-	alloc r14=ar.pfs,0,0,2,0 // must be first in an insn group
-	mov out0=cr.ivr		// pass cr.ivr as first arg
-	add out1=16,sp		// pass pointer to pt_regs as second arg
-	;;
-	srlz.d			// make sure we see the effect of cr.ivr
-	movl r14=ia64_leave_kernel
-	;;
-	mov rp=r14
-	br.call.sptk.many b6=ia64_handle_irq
+	/* interrupt handler has become too big to fit this area. */
+	br.sptk.many __interrupt
 END(interrupt)
 
 	.org ia64_ivt+0x3400
@@ -978,6 +939,7 @@ END(interrupt)
 	 *	- ar.fpsr: set to kernel settings
 	 *	-  b6: preserved (same as on entry)
 	 */
+#ifdef __IA64_ASM_PARAVIRTUALIZED_NATIVE
 GLOBAL_ENTRY(ia64_syscall_setup)
 #if PT(B6) != 0
 # error This code assumes that b6 is the first field in pt_regs.
@@ -1069,6 +1031,7 @@ GLOBAL_ENTRY(ia64_syscall_setup)
 (p10)	mov r8=-EINVAL
 	br.ret.sptk.many b7
 END(ia64_syscall_setup)
+#endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
 
 	.org ia64_ivt+0x3c00
 /////////////////////////////////////////////////////////////////////////////////////////
@@ -1082,7 +1045,7 @@ END(ia64_syscall_setup)
 	DBG_FAULT(16)
 	FAULT(16)
 
-#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+#if defined(CONFIG_VIRT_CPU_ACCOUNTING) && defined(__IA64_ASM_PARAVIRTUALIZED_NATIVE)
 	/*
 	 * There is no particular reason for this code to be here, other than
 	 * that there happens to be space here that would go unused otherwise.
@@ -1092,7 +1055,7 @@ END(ia64_syscall_setup)
 	 * account_sys_enter is called from SAVE_MIN* macros if accounting is
 	 * enabled and if the macro is entered from user mode.
 	 */
-ENTRY(account_sys_enter)
+GLOBAL_ENTRY(account_sys_enter)
 	// mov.m r20=ar.itc is called in advance, and r13 is current
 	add r16=TI_AC_STAMP+IA64_TASK_SIZE,r13
 	add r17=TI_AC_LEAVE+IA64_TASK_SIZE,r13
@@ -1123,110 +1086,18 @@ END(account_sys_enter)
 	DBG_FAULT(17)
 	FAULT(17)
 
-ENTRY(non_syscall)
-	mov ar.rsc=r27			// restore ar.rsc before SAVE_MIN_WITH_COVER
-	;;
-	SAVE_MIN_WITH_COVER
-
-	// There is no particular reason for this code to be here, other than that
-	// there happens to be space here that would go unused otherwise.  If this
-	// fault ever gets "unreserved", simply moved the following code to a more
-	// suitable spot...
-
-	alloc r14=ar.pfs,0,0,2,0
-	mov out0=cr.iim
-	add out1=16,sp
-	adds r3=8,r2			// set up second base pointer for SAVE_REST
-
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i				// guarantee that interruption collection is on
-	;;
-(p15)	ssm psr.i			// restore psr.i
-	movl r15=ia64_leave_kernel
-	;;
-	SAVE_REST
-	mov rp=r15
-	;;
-	br.call.sptk.many b6=ia64_bad_break	// avoid WAW on CFM and ignore return addr
-END(non_syscall)
-
 	.org ia64_ivt+0x4800
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x4800 Entry 18 (size 64 bundles) Reserved
 	DBG_FAULT(18)
 	FAULT(18)
 
-	/*
-	 * There is no particular reason for this code to be here, other than that
-	 * there happens to be space here that would go unused otherwise.  If this
-	 * fault ever gets "unreserved", simply moved the following code to a more
-	 * suitable spot...
-	 */
-
-ENTRY(dispatch_unaligned_handler)
-	SAVE_MIN_WITH_COVER
-	;;
-	alloc r14=ar.pfs,0,0,2,0		// now it's safe (must be first in insn group!)
-	mov out0=cr.ifa
-	adds out1=16,sp
-
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i					// guarantee that interruption collection is on
-	;;
-(p15)	ssm psr.i				// restore psr.i
-	adds r3=8,r2				// set up second base pointer
-	;;
-	SAVE_REST
-	movl r14=ia64_leave_kernel
-	;;
-	mov rp=r14
-	br.sptk.many ia64_prepare_handle_unaligned
-END(dispatch_unaligned_handler)
-
 	.org ia64_ivt+0x4c00
 /////////////////////////////////////////////////////////////////////////////////////////
 // 0x4c00 Entry 19 (size 64 bundles) Reserved
 	DBG_FAULT(19)
 	FAULT(19)
 
-	/*
-	 * There is no particular reason for this code to be here, other than that
-	 * there happens to be space here that would go unused otherwise.  If this
-	 * fault ever gets "unreserved", simply moved the following code to a more
-	 * suitable spot...
-	 */
-
-ENTRY(dispatch_to_fault_handler)
-	/*
-	 * Input:
-	 *	psr.ic:	off
-	 *	r19:	fault vector number (e.g., 24 for General Exception)
-	 *	r31:	contains saved predicates (pr)
-	 */
-	SAVE_MIN_WITH_COVER_R19
-	alloc r14=ar.pfs,0,0,5,0
-	mov out0=r15
-	mov out1=cr.isr
-	mov out2=cr.ifa
-	mov out3=cr.iim
-	mov out4=cr.itir
-	;;
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i					// guarantee that interruption collection is on
-	;;
-(p15)	ssm psr.i				// restore psr.i
-	adds r3=8,r2				// set up second base pointer for SAVE_REST
-	;;
-	SAVE_REST
-	movl r14=ia64_leave_kernel
-	;;
-	mov rp=r14
-	br.call.sptk.many b6=ia64_fault
-END(dispatch_to_fault_handler)
-
 //
 // --- End of long entries, Beginning of short entries
 //
@@ -1236,8 +1107,8 @@ END(dispatch_to_fault_handler)
 // 0x5000 Entry 20 (size 16 bundles) Page Not Present (10,22,49)
 ENTRY(page_not_present)
 	DBG_FAULT(20)
-	mov r16=cr.ifa
-	rsm psr.dt
+	MOV_FROM_IFA(r16)
+	RSM_PSR_DT
 	/*
 	 * The Linux page fault handler doesn't expect non-present pages to be in
 	 * the TLB.  Flush the existing entry now, so we meet that expectation.
@@ -1256,8 +1127,8 @@ END(page_not_present)
 // 0x5100 Entry 21 (size 16 bundles) Key Permission (13,25,52)
 ENTRY(key_permission)
 	DBG_FAULT(21)
-	mov r16=cr.ifa
-	rsm psr.dt
+	MOV_FROM_IFA(r16)
+	RSM_PSR_DT
 	mov r31=pr
 	;;
 	srlz.d
@@ -1269,8 +1140,8 @@ END(key_permission)
 // 0x5200 Entry 22 (size 16 bundles) Instruction Access Rights (26)
 ENTRY(iaccess_rights)
 	DBG_FAULT(22)
-	mov r16=cr.ifa
-	rsm psr.dt
+	MOV_FROM_IFA(r16)
+	RSM_PSR_DT
 	mov r31=pr
 	;;
 	srlz.d
@@ -1282,8 +1153,8 @@ END(iaccess_rights)
 // 0x5300 Entry 23 (size 16 bundles) Data Access Rights (14,53)
 ENTRY(daccess_rights)
 	DBG_FAULT(23)
-	mov r16=cr.ifa
-	rsm psr.dt
+	MOV_FROM_IFA(r16)
+	RSM_PSR_DT
 	mov r31=pr
 	;;
 	srlz.d
@@ -1295,7 +1166,7 @@ END(daccess_rights)
 // 0x5400 Entry 24 (size 16 bundles) General Exception (5,32,34,36,38,39)
 ENTRY(general_exception)
 	DBG_FAULT(24)
-	mov r16=cr.isr
+	MOV_FROM_ISR(r16)
 	mov r31=pr
 	;;
 	cmp4.eq p6,p0=0,r16
@@ -1324,8 +1195,8 @@ END(disabled_fp_reg)
 ENTRY(nat_consumption)
 	DBG_FAULT(26)
 
-	mov r16=cr.ipsr
-	mov r17=cr.isr
+	MOV_FROM_IPSR(p0, r16)
+	MOV_FROM_ISR(r17)
 	mov r31=pr				// save PR
 	;;
 	and r18=0xf,r17				// r18 = cr.ipsr.code{3:0}
@@ -1335,10 +1206,10 @@ ENTRY(nat_consumption)
 	dep r16=-1,r16,IA64_PSR_ED_BIT,1
 (p6)	br.cond.spnt 1f		// branch if (cr.ispr.na == 0 || cr.ipsr.code{3:0} != LFETCH)
 	;;
-	mov cr.ipsr=r16		// set cr.ipsr.na
+	MOV_TO_IPSR(p0, r16, r18)
 	mov pr=r31,-1
 	;;
-	rfi
+	RFI
 
 1:	mov pr=r31,-1
 	;;
@@ -1360,26 +1231,26 @@ ENTRY(speculation_vector)
 	 *
 	 * cr.imm contains zero_ext(imm21)
 	 */
-	mov r18=cr.iim
+	MOV_FROM_IIM(r18)
 	;;
-	mov r17=cr.iip
+	MOV_FROM_IIP(r17)
 	shl r18=r18,43			// put sign bit in position (43=64-21)
 	;;
 
-	mov r16=cr.ipsr
+	MOV_FROM_IPSR(p0, r16)
 	shr r18=r18,39			// sign extend (39=43-4)
 	;;
 
 	add r17=r17,r18			// now add the offset
 	;;
-	mov cr.iip=r17
+	MOV_FROM_IIP(r17)
 	dep r16=0,r16,41,2		// clear EI
 	;;
 
-	mov cr.ipsr=r16
+	MOV_FROM_IPSR(p0, r16)
 	;;
 
-	rfi				// and go back
+	RFI
 END(speculation_vector)
 
 	.org ia64_ivt+0x5800
@@ -1517,11 +1388,11 @@ ENTRY(ia32_intercept)
 	DBG_FAULT(46)
 #ifdef	CONFIG_IA32_SUPPORT
 	mov r31=pr
-	mov r16=cr.isr
+	MOV_FROM_ISR(r16)
 	;;
 	extr.u r17=r16,16,8	// get ISR.code
 	mov r18=ar.eflag
-	mov r19=cr.iim		// old eflag value
+	MOV_FROM_IIM(r19)	// old eflag value
 	;;
 	cmp.ne p6,p0=2,r17
 (p6)	br.cond.spnt 1f		// not a system flag fault
@@ -1533,7 +1404,7 @@ ENTRY(ia32_intercept)
 (p6)	br.cond.spnt 1f		// eflags.ac bit didn't change
 	;;
 	mov pr=r31,-1		// restore predicate registers
-	rfi
+	RFI
 
 1:
 #endif	// CONFIG_IA32_SUPPORT
@@ -1673,6 +1544,137 @@ END(ia32_interrupt)
 	DBG_FAULT(67)
 	FAULT(67)
 
+	//-----------------------------------------------------------------------------------
+	// call do_page_fault (predicates are in r31, psr.dt may be off, r16 is faulting address)
+ENTRY(page_fault)
+	SSM_PSR_DT_AND_SRLZ_I
+	;;
+	SAVE_MIN_WITH_COVER
+	alloc r15=ar.pfs,0,0,3,0
+	MOV_FROM_IFA(out0)
+	MOV_FROM_ISR(out1)
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r14, r3)
+	adds r3=8,r2				// set up second base pointer
+	SSM_PSR_I(p15, p15, r14)		// restore psr.i
+	movl r14=ia64_leave_kernel
+	;;
+	SAVE_REST
+	mov rp=r14
+	;;
+	adds out2=16,r12			// out2 = pointer to pt_regs
+	br.call.sptk.many b6=ia64_do_page_fault	// ignore return address
+END(page_fault)
+
+ENTRY(non_syscall)
+	mov ar.rsc=r27			// restore ar.rsc before SAVE_MIN_WITH_COVER
+	;;
+	SAVE_MIN_WITH_COVER
+
+	// There is no particular reason for this code to be here, other than that
+	// there happens to be space here that would go unused otherwise.  If this
+	// fault ever gets "unreserved", simply moved the following code to a more
+	// suitable spot...
+
+	alloc r14=ar.pfs,0,0,2,0
+	MOV_FROM_IIM(out0)
+	add out1=16,sp
+	adds r3=8,r2			// set up second base pointer for SAVE_REST
+
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r15, r24)
+					// guarantee that interruption collection is on
+	SSM_PSR_I(p15, p15, r15)	// restore psr.i
+	movl r15=ia64_leave_kernel
+	;;
+	SAVE_REST
+	mov rp=r15
+	;;
+	br.call.sptk.many b6=ia64_bad_break	// avoid WAW on CFM and ignore return addr
+END(non_syscall)
+
+ENTRY(__interrupt)
+	DBG_FAULT(12)
+	mov r31=pr		// prepare to save predicates
+	;;
+	SAVE_MIN_WITH_COVER	// uses r31; defines r2 and r3
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r14)
+				// ensure everybody knows psr.ic is back on
+	adds r3=8,r2		// set up second base pointer for SAVE_REST
+	;;
+	SAVE_REST
+	;;
+	MCA_RECOVER_RANGE(interrupt)
+	alloc r14=ar.pfs,0,0,2,0 // must be first in an insn group
+	MOV_FROM_IVR(out0, r8)	// pass cr.ivr as first arg
+	add out1=16,sp		// pass pointer to pt_regs as second arg
+	;;
+	srlz.d			// make sure we see the effect of cr.ivr
+	movl r14=ia64_leave_kernel
+	;;
+	mov rp=r14
+	br.call.sptk.many b6=ia64_handle_irq
+END(__interrupt)
+
+	/*
+	 * There is no particular reason for this code to be here, other than that
+	 * there happens to be space here that would go unused otherwise.  If this
+	 * fault ever gets "unreserved", simply moved the following code to a more
+	 * suitable spot...
+	 */
+
+ENTRY(dispatch_unaligned_handler)
+	SAVE_MIN_WITH_COVER
+	;;
+	alloc r14=ar.pfs,0,0,2,0		// now it's safe (must be first in insn group!)
+	MOV_FROM_IFA(out0)
+	adds out1=16,sp
+
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r24)
+						// guarantee that interruption collection is on
+	SSM_PSR_I(p15, p15, r3)			// restore psr.i
+	adds r3=8,r2				// set up second base pointer
+	;;
+	SAVE_REST
+	movl r14=ia64_leave_kernel
+	;;
+	mov rp=r14
+	br.sptk.many ia64_prepare_handle_unaligned
+END(dispatch_unaligned_handler)
+
+	/*
+	 * There is no particular reason for this code to be here, other than that
+	 * there happens to be space here that would go unused otherwise.  If this
+	 * fault ever gets "unreserved", simply moved the following code to a more
+	 * suitable spot...
+	 */
+
+ENTRY(dispatch_to_fault_handler)
+	/*
+	 * Input:
+	 *	psr.ic:	off
+	 *	r19:	fault vector number (e.g., 24 for General Exception)
+	 *	r31:	contains saved predicates (pr)
+	 */
+	SAVE_MIN_WITH_COVER_R19
+	alloc r14=ar.pfs,0,0,5,0
+	MOV_FROM_ISR(out1)
+	MOV_FROM_IFA(out2)
+	MOV_FROM_IIM(out3)
+	MOV_FROM_ITIR(out4)
+	;;
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, out0)
+						// guarantee that interruption collection is on
+	mov out0=r15
+	;;
+	SSM_PSR_I(p15, p15, r3)			// restore psr.i
+	adds r3=8,r2				// set up second base pointer for SAVE_REST
+	;;
+	SAVE_REST
+	movl r14=ia64_leave_kernel
+	;;
+	mov rp=r14
+	br.call.sptk.many b6=ia64_fault
+END(dispatch_to_fault_handler)
+
 	/*
 	 * Squatting in this space ...
 	 *
@@ -1686,11 +1688,10 @@ ENTRY(dispatch_illegal_op_fault)
 	.prologue
 	.body
 	SAVE_MIN_WITH_COVER
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i		// guarantee that interruption collection is on
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r24)
+				// guarantee that interruption collection is on
 	;;
-(p15)	ssm psr.i	// restore psr.i
+	SSM_PSR_I(p15, p15, r3)	// restore psr.i
 	adds r3=8,r2	// set up second base pointer for SAVE_REST
 	;;
 	alloc r14=ar.pfs,0,0,1,0	// must be first in insn group
@@ -1729,12 +1730,11 @@ END(dispatch_illegal_op_fault)
 ENTRY(dispatch_to_ia32_handler)
 	SAVE_MIN
 	;;
-	mov r14=cr.isr
-	ssm psr.ic | PSR_DEFAULT_BITS
-	;;
-	srlz.i					// guarantee that interruption collection is on
+	MOV_FROM_ISR(r14)
+	SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(r3, r24)
+				// guarantee that interruption collection is on
 	;;
-(p15)	ssm psr.i
+	SSM_PSR_I(p15, p15, r3)
 	adds r3=8,r2		// Base pointer for SAVE_REST
 	;;
 	SAVE_REST
diff --git a/arch/ia64/kernel/jprobes.S b/arch/ia64/kernel/jprobes.S
index 621630256c4a..f69389c7be1d 100644
--- a/arch/ia64/kernel/jprobes.S
+++ b/arch/ia64/kernel/jprobes.S
@@ -45,7 +45,7 @@
  * to the correct location.
  */
 #include <asm/asmmacro.h>
-#include <asm-ia64/break.h>
+#include <asm/break.h>
 
 	/*
 	 * void jprobe_break(void)
diff --git a/arch/ia64/kernel/kprobes.c b/arch/ia64/kernel/kprobes.c
index 233434f4f88f..f07688da947c 100644
--- a/arch/ia64/kernel/kprobes.c
+++ b/arch/ia64/kernel/kprobes.c
@@ -429,8 +429,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 		((struct fnptr *)kretprobe_trampoline)->ip;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -485,7 +484,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
@@ -500,7 +499,6 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	return 1;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c
index 705176b434b3..7dd96c127177 100644
--- a/arch/ia64/kernel/mca.c
+++ b/arch/ia64/kernel/mca.c
@@ -707,7 +707,7 @@ ia64_mca_cmc_vector_enable (void *dummy)
 static void
 ia64_mca_cmc_vector_disable_keventd(struct work_struct *unused)
 {
-	on_each_cpu(ia64_mca_cmc_vector_disable, NULL, 1, 0);
+	on_each_cpu(ia64_mca_cmc_vector_disable, NULL, 0);
 }
 
 /*
@@ -719,7 +719,7 @@ ia64_mca_cmc_vector_disable_keventd(struct work_struct *unused)
 static void
 ia64_mca_cmc_vector_enable_keventd(struct work_struct *unused)
 {
-	on_each_cpu(ia64_mca_cmc_vector_enable, NULL, 1, 0);
+	on_each_cpu(ia64_mca_cmc_vector_enable, NULL, 0);
 }
 
 /*
@@ -1881,7 +1881,7 @@ static int __cpuinit mca_cpu_callback(struct notifier_block *nfb,
 	case CPU_ONLINE:
 	case CPU_ONLINE_FROZEN:
 		smp_call_function_single(hotcpu, ia64_mca_cmc_vector_adjust,
-					 NULL, 1, 0);
+					 NULL, 0);
 		break;
 	}
 	return NOTIFY_OK;
diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h
index 74b6d670aaef..292e214a3b84 100644
--- a/arch/ia64/kernel/minstate.h
+++ b/arch/ia64/kernel/minstate.h
@@ -2,6 +2,7 @@
 #include <asm/cache.h>
 
 #include "entry.h"
+#include "paravirt_inst.h"
 
 #ifdef CONFIG_VIRT_CPU_ACCOUNTING
 /* read ar.itc in advance, and use it before leaving bank 0 */
@@ -43,16 +44,16 @@
  * Note that psr.ic is NOT turned on by this macro.  This is so that
  * we can pass interruption state as arguments to a handler.
  */
-#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA,WORKAROUND)						\
+#define IA64_NATIVE_DO_SAVE_MIN(__COVER,SAVE_IFS,EXTRA,WORKAROUND)				\
 	mov r16=IA64_KR(CURRENT);	/* M */							\
 	mov r27=ar.rsc;			/* M */							\
 	mov r20=r1;			/* A */							\
 	mov r25=ar.unat;		/* M */							\
-	mov r29=cr.ipsr;		/* M */							\
+	MOV_FROM_IPSR(p0,r29);		/* M */							\
 	mov r26=ar.pfs;			/* I */							\
-	mov r28=cr.iip;			/* M */							\
+	MOV_FROM_IIP(r28);			/* M */						\
 	mov r21=ar.fpsr;		/* M */							\
-	COVER;				/* B;; (or nothing) */					\
+	__COVER;				/* B;; (or nothing) */				\
 	;;											\
 	adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16;						\
 	;;											\
@@ -244,6 +245,6 @@
 1:						\
 	.pred.rel "mutex", pKStk, pUStk
 
-#define SAVE_MIN_WITH_COVER	DO_SAVE_MIN(cover, mov r30=cr.ifs, , RSE_WORKAROUND)
-#define SAVE_MIN_WITH_COVER_R19	DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND)
+#define SAVE_MIN_WITH_COVER	DO_SAVE_MIN(COVER, mov r30=cr.ifs, , RSE_WORKAROUND)
+#define SAVE_MIN_WITH_COVER_R19	DO_SAVE_MIN(COVER, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND)
 #define SAVE_MIN			DO_SAVE_MIN(     , mov r30=r0, , )
diff --git a/arch/ia64/kernel/module.c b/arch/ia64/kernel/module.c
index e83e2ea3b3e0..29aad349e0c4 100644
--- a/arch/ia64/kernel/module.c
+++ b/arch/ia64/kernel/module.c
@@ -321,7 +321,8 @@ module_alloc (unsigned long size)
 void
 module_free (struct module *mod, void *module_region)
 {
-	if (mod->arch.init_unw_table && module_region == mod->module_init) {
+	if (mod && mod->arch.init_unw_table &&
+	    module_region == mod->module_init) {
 		unw_remove_unwind_table(mod->arch.init_unw_table);
 		mod->arch.init_unw_table = NULL;
 	}
diff --git a/arch/ia64/kernel/nr-irqs.c b/arch/ia64/kernel/nr-irqs.c
new file mode 100644
index 000000000000..8273afc32db8
--- /dev/null
+++ b/arch/ia64/kernel/nr-irqs.c
@@ -0,0 +1,24 @@
+/*
+ * calculate
+ * NR_IRQS = max(IA64_NATIVE_NR_IRQS, XEN_NR_IRQS, FOO_NR_IRQS...)
+ * depending on config.
+ * This must be calculated before processing asm-offset.c.
+ */
+
+#define ASM_OFFSETS_C 1
+
+#include <linux/kbuild.h>
+#include <linux/threads.h>
+#include <asm/native/irq.h>
+
+void foo(void)
+{
+	union paravirt_nr_irqs_max {
+		char ia64_native_nr_irqs[IA64_NATIVE_NR_IRQS];
+#ifdef CONFIG_XEN
+		char xen_nr_irqs[XEN_NR_IRQS];
+#endif
+	};
+
+	DEFINE(NR_IRQS, sizeof (union paravirt_nr_irqs_max));
+}
diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c
index 9dc00f7fe10e..e5c57f413ca2 100644
--- a/arch/ia64/kernel/palinfo.c
+++ b/arch/ia64/kernel/palinfo.c
@@ -921,7 +921,7 @@ int palinfo_handle_smp(pal_func_cpu_u_t *f, char *page)
 
 
 	/* will send IPI to other CPU and wait for completion of remote call */
-	if ((ret=smp_call_function_single(f->req_cpu, palinfo_smp_call, &ptr, 0, 1))) {
+	if ((ret=smp_call_function_single(f->req_cpu, palinfo_smp_call, &ptr, 1))) {
 		printk(KERN_ERR "palinfo: remote CPU call from %d to %d on function %d: "
 		       "error %d\n", smp_processor_id(), f->req_cpu, f->func_id, ret);
 		return 0;
diff --git a/arch/ia64/kernel/paravirt.c b/arch/ia64/kernel/paravirt.c
new file mode 100644
index 000000000000..afaf5b9a2cf0
--- /dev/null
+++ b/arch/ia64/kernel/paravirt.c
@@ -0,0 +1,369 @@
+/******************************************************************************
+ * arch/ia64/kernel/paravirt.c
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *     Yaozu (Eddie) Dong <eddie.dong@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/init.h>
+
+#include <linux/compiler.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include <asm/iosapic.h>
+#include <asm/paravirt.h>
+
+/***************************************************************************
+ * general info
+ */
+struct pv_info pv_info = {
+	.kernel_rpl = 0,
+	.paravirt_enabled = 0,
+	.name = "bare hardware"
+};
+
+/***************************************************************************
+ * pv_init_ops
+ * initialization hooks.
+ */
+
+struct pv_init_ops pv_init_ops;
+
+/***************************************************************************
+ * pv_cpu_ops
+ * intrinsics hooks.
+ */
+
+/* ia64_native_xxx are macros so that we have to make them real functions */
+
+#define DEFINE_VOID_FUNC1(name)					\
+	static void						\
+	ia64_native_ ## name ## _func(unsigned long arg)	\
+	{							\
+		ia64_native_ ## name(arg);			\
+	}							\
+
+#define DEFINE_VOID_FUNC2(name)					\
+	static void						\
+	ia64_native_ ## name ## _func(unsigned long arg0,	\
+				      unsigned long arg1)	\
+	{							\
+		ia64_native_ ## name(arg0, arg1);		\
+	}							\
+
+#define DEFINE_FUNC0(name)			\
+	static unsigned long			\
+	ia64_native_ ## name ## _func(void)	\
+	{					\
+		return ia64_native_ ## name();	\
+	}
+
+#define DEFINE_FUNC1(name, type)			\
+	static unsigned long				\
+	ia64_native_ ## name ## _func(type arg)		\
+	{						\
+		return ia64_native_ ## name(arg);	\
+	}						\
+
+DEFINE_VOID_FUNC1(fc);
+DEFINE_VOID_FUNC1(intrin_local_irq_restore);
+
+DEFINE_VOID_FUNC2(ptcga);
+DEFINE_VOID_FUNC2(set_rr);
+
+DEFINE_FUNC0(get_psr_i);
+
+DEFINE_FUNC1(thash, unsigned long);
+DEFINE_FUNC1(get_cpuid, int);
+DEFINE_FUNC1(get_pmd, int);
+DEFINE_FUNC1(get_rr, unsigned long);
+
+static void
+ia64_native_ssm_i_func(void)
+{
+	ia64_native_ssm(IA64_PSR_I);
+}
+
+static void
+ia64_native_rsm_i_func(void)
+{
+	ia64_native_rsm(IA64_PSR_I);
+}
+
+static void
+ia64_native_set_rr0_to_rr4_func(unsigned long val0, unsigned long val1,
+				unsigned long val2, unsigned long val3,
+				unsigned long val4)
+{
+	ia64_native_set_rr0_to_rr4(val0, val1, val2, val3, val4);
+}
+
+#define CASE_GET_REG(id)				\
+	case _IA64_REG_ ## id:				\
+	res = ia64_native_getreg(_IA64_REG_ ## id);	\
+	break;
+#define CASE_GET_AR(id) CASE_GET_REG(AR_ ## id)
+#define CASE_GET_CR(id) CASE_GET_REG(CR_ ## id)
+
+unsigned long
+ia64_native_getreg_func(int regnum)
+{
+	unsigned long res = -1;
+	switch (regnum) {
+	CASE_GET_REG(GP);
+	CASE_GET_REG(IP);
+	CASE_GET_REG(PSR);
+	CASE_GET_REG(TP);
+	CASE_GET_REG(SP);
+
+	CASE_GET_AR(KR0);
+	CASE_GET_AR(KR1);
+	CASE_GET_AR(KR2);
+	CASE_GET_AR(KR3);
+	CASE_GET_AR(KR4);
+	CASE_GET_AR(KR5);
+	CASE_GET_AR(KR6);
+	CASE_GET_AR(KR7);
+	CASE_GET_AR(RSC);
+	CASE_GET_AR(BSP);
+	CASE_GET_AR(BSPSTORE);
+	CASE_GET_AR(RNAT);
+	CASE_GET_AR(FCR);
+	CASE_GET_AR(EFLAG);
+	CASE_GET_AR(CSD);
+	CASE_GET_AR(SSD);
+	CASE_GET_AR(CFLAG);
+	CASE_GET_AR(FSR);
+	CASE_GET_AR(FIR);
+	CASE_GET_AR(FDR);
+	CASE_GET_AR(CCV);
+	CASE_GET_AR(UNAT);
+	CASE_GET_AR(FPSR);
+	CASE_GET_AR(ITC);
+	CASE_GET_AR(PFS);
+	CASE_GET_AR(LC);
+	CASE_GET_AR(EC);
+
+	CASE_GET_CR(DCR);
+	CASE_GET_CR(ITM);
+	CASE_GET_CR(IVA);
+	CASE_GET_CR(PTA);
+	CASE_GET_CR(IPSR);
+	CASE_GET_CR(ISR);
+	CASE_GET_CR(IIP);
+	CASE_GET_CR(IFA);
+	CASE_GET_CR(ITIR);
+	CASE_GET_CR(IIPA);
+	CASE_GET_CR(IFS);
+	CASE_GET_CR(IIM);
+	CASE_GET_CR(IHA);
+	CASE_GET_CR(LID);
+	CASE_GET_CR(IVR);
+	CASE_GET_CR(TPR);
+	CASE_GET_CR(EOI);
+	CASE_GET_CR(IRR0);
+	CASE_GET_CR(IRR1);
+	CASE_GET_CR(IRR2);
+	CASE_GET_CR(IRR3);
+	CASE_GET_CR(ITV);
+	CASE_GET_CR(PMV);
+	CASE_GET_CR(CMCV);
+	CASE_GET_CR(LRR0);
+	CASE_GET_CR(LRR1);
+
+	default:
+		printk(KERN_CRIT "wrong_getreg %d\n", regnum);
+		break;
+	}
+	return res;
+}
+
+#define CASE_SET_REG(id)				\
+	case _IA64_REG_ ## id:				\
+	ia64_native_setreg(_IA64_REG_ ## id, val);	\
+	break;
+#define CASE_SET_AR(id) CASE_SET_REG(AR_ ## id)
+#define CASE_SET_CR(id) CASE_SET_REG(CR_ ## id)
+
+void
+ia64_native_setreg_func(int regnum, unsigned long val)
+{
+	switch (regnum) {
+	case _IA64_REG_PSR_L:
+		ia64_native_setreg(_IA64_REG_PSR_L, val);
+		ia64_dv_serialize_data();
+		break;
+	CASE_SET_REG(SP);
+	CASE_SET_REG(GP);
+
+	CASE_SET_AR(KR0);
+	CASE_SET_AR(KR1);
+	CASE_SET_AR(KR2);
+	CASE_SET_AR(KR3);
+	CASE_SET_AR(KR4);
+	CASE_SET_AR(KR5);
+	CASE_SET_AR(KR6);
+	CASE_SET_AR(KR7);
+	CASE_SET_AR(RSC);
+	CASE_SET_AR(BSP);
+	CASE_SET_AR(BSPSTORE);
+	CASE_SET_AR(RNAT);
+	CASE_SET_AR(FCR);
+	CASE_SET_AR(EFLAG);
+	CASE_SET_AR(CSD);
+	CASE_SET_AR(SSD);
+	CASE_SET_AR(CFLAG);
+	CASE_SET_AR(FSR);
+	CASE_SET_AR(FIR);
+	CASE_SET_AR(FDR);
+	CASE_SET_AR(CCV);
+	CASE_SET_AR(UNAT);
+	CASE_SET_AR(FPSR);
+	CASE_SET_AR(ITC);
+	CASE_SET_AR(PFS);
+	CASE_SET_AR(LC);
+	CASE_SET_AR(EC);
+
+	CASE_SET_CR(DCR);
+	CASE_SET_CR(ITM);
+	CASE_SET_CR(IVA);
+	CASE_SET_CR(PTA);
+	CASE_SET_CR(IPSR);
+	CASE_SET_CR(ISR);
+	CASE_SET_CR(IIP);
+	CASE_SET_CR(IFA);
+	CASE_SET_CR(ITIR);
+	CASE_SET_CR(IIPA);
+	CASE_SET_CR(IFS);
+	CASE_SET_CR(IIM);
+	CASE_SET_CR(IHA);
+	CASE_SET_CR(LID);
+	CASE_SET_CR(IVR);
+	CASE_SET_CR(TPR);
+	CASE_SET_CR(EOI);
+	CASE_SET_CR(IRR0);
+	CASE_SET_CR(IRR1);
+	CASE_SET_CR(IRR2);
+	CASE_SET_CR(IRR3);
+	CASE_SET_CR(ITV);
+	CASE_SET_CR(PMV);
+	CASE_SET_CR(CMCV);
+	CASE_SET_CR(LRR0);
+	CASE_SET_CR(LRR1);
+	default:
+		printk(KERN_CRIT "wrong setreg %d\n", regnum);
+		break;
+	}
+}
+
+struct pv_cpu_ops pv_cpu_ops = {
+	.fc		= ia64_native_fc_func,
+	.thash		= ia64_native_thash_func,
+	.get_cpuid	= ia64_native_get_cpuid_func,
+	.get_pmd	= ia64_native_get_pmd_func,
+	.ptcga		= ia64_native_ptcga_func,
+	.get_rr		= ia64_native_get_rr_func,
+	.set_rr		= ia64_native_set_rr_func,
+	.set_rr0_to_rr4	= ia64_native_set_rr0_to_rr4_func,
+	.ssm_i		= ia64_native_ssm_i_func,
+	.getreg		= ia64_native_getreg_func,
+	.setreg		= ia64_native_setreg_func,
+	.rsm_i		= ia64_native_rsm_i_func,
+	.get_psr_i	= ia64_native_get_psr_i_func,
+	.intrin_local_irq_restore
+			= ia64_native_intrin_local_irq_restore_func,
+};
+EXPORT_SYMBOL(pv_cpu_ops);
+
+/******************************************************************************
+ * replacement of hand written assembly codes.
+ */
+
+void
+paravirt_cpu_asm_init(const struct pv_cpu_asm_switch *cpu_asm_switch)
+{
+	extern unsigned long paravirt_switch_to_targ;
+	extern unsigned long paravirt_leave_syscall_targ;
+	extern unsigned long paravirt_work_processed_syscall_targ;
+	extern unsigned long paravirt_leave_kernel_targ;
+
+	paravirt_switch_to_targ = cpu_asm_switch->switch_to;
+	paravirt_leave_syscall_targ = cpu_asm_switch->leave_syscall;
+	paravirt_work_processed_syscall_targ =
+		cpu_asm_switch->work_processed_syscall;
+	paravirt_leave_kernel_targ = cpu_asm_switch->leave_kernel;
+}
+
+/***************************************************************************
+ * pv_iosapic_ops
+ * iosapic read/write hooks.
+ */
+
+static unsigned int
+ia64_native_iosapic_read(char __iomem *iosapic, unsigned int reg)
+{
+	return __ia64_native_iosapic_read(iosapic, reg);
+}
+
+static void
+ia64_native_iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val)
+{
+	__ia64_native_iosapic_write(iosapic, reg, val);
+}
+
+struct pv_iosapic_ops pv_iosapic_ops = {
+	.pcat_compat_init = ia64_native_iosapic_pcat_compat_init,
+	.get_irq_chip = ia64_native_iosapic_get_irq_chip,
+
+	.__read = ia64_native_iosapic_read,
+	.__write = ia64_native_iosapic_write,
+};
+
+/***************************************************************************
+ * pv_irq_ops
+ * irq operations
+ */
+
+struct pv_irq_ops pv_irq_ops = {
+	.register_ipi = ia64_native_register_ipi,
+
+	.assign_irq_vector = ia64_native_assign_irq_vector,
+	.free_irq_vector = ia64_native_free_irq_vector,
+	.register_percpu_irq = ia64_native_register_percpu_irq,
+
+	.resend_irq = ia64_native_resend_irq,
+};
+
+/***************************************************************************
+ * pv_time_ops
+ * time operations
+ */
+
+static int
+ia64_native_do_steal_accounting(unsigned long *new_itm)
+{
+	return 0;
+}
+
+struct pv_time_ops pv_time_ops = {
+	.do_steal_accounting = ia64_native_do_steal_accounting,
+};
diff --git a/arch/ia64/kernel/paravirt_inst.h b/arch/ia64/kernel/paravirt_inst.h
new file mode 100644
index 000000000000..5cad6fb2ed19
--- /dev/null
+++ b/arch/ia64/kernel/paravirt_inst.h
@@ -0,0 +1,29 @@
+/******************************************************************************
+ * linux/arch/ia64/xen/paravirt_inst.h
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifdef __IA64_ASM_PARAVIRTUALIZED_XEN
+#include <asm/xen/inst.h>
+#include <asm/xen/minstate.h>
+#else
+#include <asm/native/inst.h>
+#endif
+
diff --git a/arch/ia64/kernel/paravirtentry.S b/arch/ia64/kernel/paravirtentry.S
new file mode 100644
index 000000000000..2f42fcb9776a
--- /dev/null
+++ b/arch/ia64/kernel/paravirtentry.S
@@ -0,0 +1,60 @@
+/******************************************************************************
+ * linux/arch/ia64/xen/paravirtentry.S
+ *
+ * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <asm/asmmacro.h>
+#include <asm/asm-offsets.h>
+#include "entry.h"
+
+#define DATA8(sym, init_value)			\
+	.pushsection .data.read_mostly ;	\
+	.align 8 ;				\
+	.global sym ;				\
+	sym: ;					\
+	data8 init_value ;			\
+	.popsection
+
+#define BRANCH(targ, reg, breg)		\
+	movl reg=targ ;			\
+	;;				\
+	ld8 reg=[reg] ;			\
+	;;				\
+	mov breg=reg ;			\
+	br.cond.sptk.many breg
+
+#define BRANCH_PROC(sym, reg, breg)				\
+	DATA8(paravirt_ ## sym ## _targ, ia64_native_ ## sym) ; \
+	GLOBAL_ENTRY(paravirt_ ## sym) ;			\
+		BRANCH(paravirt_ ## sym ## _targ, reg, breg) ;	\
+	END(paravirt_ ## sym)
+
+#define BRANCH_PROC_UNWINFO(sym, reg, breg)			\
+	DATA8(paravirt_ ## sym ## _targ, ia64_native_ ## sym) ; \
+	GLOBAL_ENTRY(paravirt_ ## sym) ;			\
+		PT_REGS_UNWIND_INFO(0) ;			\
+		BRANCH(paravirt_ ## sym ## _targ, reg, breg) ;	\
+	END(paravirt_ ## sym)
+
+
+BRANCH_PROC(switch_to, r22, b7)
+BRANCH_PROC_UNWINFO(leave_syscall, r22, b7)
+BRANCH_PROC(work_processed_syscall, r2, b7)
+BRANCH_PROC_UNWINFO(leave_kernel, r22, b7)
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 7714a97b0104..fc8f3509df27 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -1820,7 +1820,7 @@ pfm_syswide_cleanup_other_cpu(pfm_context_t *ctx)
 	int ret;
 
 	DPRINT(("calling CPU%d for cleanup\n", ctx->ctx_cpu));
-	ret = smp_call_function_single(ctx->ctx_cpu, pfm_syswide_force_stop, ctx, 0, 1);
+	ret = smp_call_function_single(ctx->ctx_cpu, pfm_syswide_force_stop, ctx, 1);
 	DPRINT(("called CPU%d for cleanup ret=%d\n", ctx->ctx_cpu, ret));
 }
 #endif /* CONFIG_SMP */
@@ -2626,7 +2626,7 @@ pfm_task_incompatible(pfm_context_t *ctx, struct task_struct *task)
 	/*
 	 * make sure the task is off any CPU
 	 */
-	wait_task_inactive(task);
+	wait_task_inactive(task, 0);
 
 	/* more to come... */
 
@@ -4774,7 +4774,7 @@ recheck:
 
 		UNPROTECT_CTX(ctx, flags);
 
-		wait_task_inactive(task);
+		wait_task_inactive(task, 0);
 
 		PROTECT_CTX(ctx, flags);
 
@@ -6508,7 +6508,7 @@ pfm_install_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl)
 	}
 
 	/* save the current system wide pmu states */
-	ret = on_each_cpu(pfm_alt_save_pmu_state, NULL, 0, 1);
+	ret = on_each_cpu(pfm_alt_save_pmu_state, NULL, 1);
 	if (ret) {
 		DPRINT(("on_each_cpu() failed: %d\n", ret));
 		goto cleanup_reserve;
@@ -6553,7 +6553,7 @@ pfm_remove_alt_pmu_interrupt(pfm_intr_handler_desc_t *hdl)
 
 	pfm_alt_intr_handler = NULL;
 
-	ret = on_each_cpu(pfm_alt_restore_pmu_state, NULL, 0, 1);
+	ret = on_each_cpu(pfm_alt_restore_pmu_state, NULL, 1);
 	if (ret) {
 		DPRINT(("on_each_cpu() failed: %d\n", ret));
 	}
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index a3a34b4eb038..3ab8373103ec 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -55,6 +55,10 @@ void (*ia64_mark_idle)(int);
 
 unsigned long boot_option_idle_override = 0;
 EXPORT_SYMBOL(boot_option_idle_override);
+unsigned long idle_halt;
+EXPORT_SYMBOL(idle_halt);
+unsigned long idle_nomwait;
+EXPORT_SYMBOL(idle_nomwait);
 
 void
 ia64_do_show_stack (struct unw_frame_info *info, void *arg)
@@ -286,7 +290,7 @@ void cpu_idle_wait(void)
 {
 	smp_mb();
 	/* kick all the CPUs so that they exit out of pm_idle */
-	smp_call_function(do_nothing, NULL, 0, 1);
+	smp_call_function(do_nothing, NULL, 1);
 }
 EXPORT_SYMBOL_GPL(cpu_idle_wait);
 
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 632cda8f2e76..593279f33e96 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -51,6 +51,7 @@
 #include <asm/mca.h>
 #include <asm/meminit.h>
 #include <asm/page.h>
+#include <asm/paravirt.h>
 #include <asm/patch.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
@@ -313,7 +314,7 @@ static inline void __init setup_crashkernel(unsigned long total, int *n)
  *
  * Setup the reserved memory areas set aside for the boot parameters,
  * initrd, etc.  There are currently %IA64_MAX_RSVD_REGIONS defined,
- * see include/asm-ia64/meminit.h if you need to define more.
+ * see arch/ia64/include/asm/meminit.h if you need to define more.
  */
 void __init
 reserve_memory (void)
@@ -341,6 +342,8 @@ reserve_memory (void)
 	rsvd_region[n].end   = (unsigned long) ia64_imva(_end);
 	n++;
 
+	n += paravirt_reserve_memory(&rsvd_region[n]);
+
 #ifdef CONFIG_BLK_DEV_INITRD
 	if (ia64_boot_param->initrd_start) {
 		rsvd_region[n].start = (unsigned long)__va(ia64_boot_param->initrd_start);
@@ -519,6 +522,8 @@ setup_arch (char **cmdline_p)
 {
 	unw_init();
 
+	paravirt_arch_setup_early();
+
 	ia64_patch_vtop((u64) __start___vtop_patchlist, (u64) __end___vtop_patchlist);
 
 	*cmdline_p = __va(ia64_boot_param->command_line);
@@ -583,6 +588,9 @@ setup_arch (char **cmdline_p)
 	acpi_boot_init();
 #endif
 
+	paravirt_banner();
+	paravirt_arch_setup_console(cmdline_p);
+
 #ifdef CONFIG_VT
 	if (!conswitchp) {
 # if defined(CONFIG_DUMMY_CONSOLE)
@@ -602,6 +610,8 @@ setup_arch (char **cmdline_p)
 #endif
 
 	/* enable IA-64 Machine Check Abort Handling unless disabled */
+	if (paravirt_arch_setup_nomca())
+		nomca = 1;
 	if (!nomca)
 		ia64_mca_init();
 
diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c
index 983296f1c813..3676468612b6 100644
--- a/arch/ia64/kernel/smp.c
+++ b/arch/ia64/kernel/smp.c
@@ -60,25 +60,9 @@ static struct local_tlb_flush_counts {
 
 static DEFINE_PER_CPU(unsigned int, shadow_flush_counts[NR_CPUS]) ____cacheline_aligned;
 
-
-/*
- * Structure and data for smp_call_function(). This is designed to minimise static memory
- * requirements. It also looks cleaner.
- */
-static  __cacheline_aligned DEFINE_SPINLOCK(call_lock);
-
-struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	long wait;
-	atomic_t started;
-	atomic_t finished;
-};
-
-static volatile struct call_data_struct *call_data;
-
 #define IPI_CALL_FUNC		0
 #define IPI_CPU_STOP		1
+#define IPI_CALL_FUNC_SINGLE	2
 #define IPI_KDUMP_CPU_STOP	3
 
 /* This needs to be cacheline aligned because it is written to by *other* CPUs.  */
@@ -86,43 +70,6 @@ static DEFINE_PER_CPU_SHARED_ALIGNED(u64, ipi_operation);
 
 extern void cpu_halt (void);
 
-void
-lock_ipi_calllock(void)
-{
-	spin_lock_irq(&call_lock);
-}
-
-void
-unlock_ipi_calllock(void)
-{
-	spin_unlock_irq(&call_lock);
-}
-
-static inline void
-handle_call_data(void)
-{
-	struct call_data_struct *data;
-	void (*func)(void *info);
-	void *info;
-	int wait;
-
-	/* release the 'pointer lock' */
-	data = (struct call_data_struct *)call_data;
-	func = data->func;
-	info = data->info;
-	wait = data->wait;
-
-	mb();
-	atomic_inc(&data->started);
-	/* At this point the structure may be gone unless wait is true. */
-	(*func)(info);
-
-	/* Notify the sending CPU that the task is done. */
-	mb();
-	if (wait)
-		atomic_inc(&data->finished);
-}
-
 static void
 stop_this_cpu(void)
 {
@@ -163,13 +110,15 @@ handle_IPI (int irq, void *dev_id)
 			ops &= ~(1 << which);
 
 			switch (which) {
-			case IPI_CALL_FUNC:
-				handle_call_data();
-				break;
-
 			case IPI_CPU_STOP:
 				stop_this_cpu();
 				break;
+			case IPI_CALL_FUNC:
+				generic_smp_call_function_interrupt();
+				break;
+			case IPI_CALL_FUNC_SINGLE:
+				generic_smp_call_function_single_interrupt();
+				break;
 #ifdef CONFIG_KEXEC
 			case IPI_KDUMP_CPU_STOP:
 				unw_init_running(kdump_cpu_freeze, NULL);
@@ -187,6 +136,8 @@ handle_IPI (int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+
+
 /*
  * Called with preemption disabled.
  */
@@ -334,7 +285,7 @@ smp_flush_tlb_cpumask(cpumask_t xcpumask)
 void
 smp_flush_tlb_all (void)
 {
-	on_each_cpu((void (*)(void *))local_flush_tlb_all, NULL, 1, 1);
+	on_each_cpu((void (*)(void *))local_flush_tlb_all, NULL, 1);
 }
 
 void
@@ -357,193 +308,18 @@ smp_flush_tlb_mm (struct mm_struct *mm)
 	 * anyhow, and once a CPU is interrupted, the cost of local_flush_tlb_all() is
 	 * rather trivial.
 	 */
-	on_each_cpu((void (*)(void *))local_finish_flush_tlb_mm, mm, 1, 1);
+	on_each_cpu((void (*)(void *))local_finish_flush_tlb_mm, mm, 1);
 }
 
-/*
- * Run a function on a specific CPU
- *  <func>	The function to run. This must be fast and non-blocking.
- *  <info>	An arbitrary pointer to pass to the function.
- *  <nonatomic>	Currently unused.
- *  <wait>	If true, wait until function has completed on other CPUs.
- *  [RETURNS]   0 on success, else a negative status code.
- *
- * Does not return until the remote CPU is nearly ready to execute <func>
- * or is or has executed.
- */
-
-int
-smp_call_function_single (int cpuid, void (*func) (void *info), void *info, int nonatomic,
-			  int wait)
-{
-	struct call_data_struct data;
-	int cpus = 1;
-	int me = get_cpu(); /* prevent preemption and reschedule on another processor */
-
-	if (cpuid == me) {
-		local_irq_disable();
-		func(info);
-		local_irq_enable();
-		put_cpu();
-		return 0;
-	}
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	spin_lock_bh(&call_lock);
-
-	call_data = &data;
-	mb();	/* ensure store to call_data precedes setting of IPI_CALL_FUNC */
-  	send_IPI_single(cpuid, IPI_CALL_FUNC);
-
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
-		cpu_relax();
-
-	if (wait)
-		while (atomic_read(&data.finished) != cpus)
-			cpu_relax();
-	call_data = NULL;
-
-	spin_unlock_bh(&call_lock);
-	put_cpu();
-	return 0;
-}
-EXPORT_SYMBOL(smp_call_function_single);
-
-/**
- * smp_call_function_mask(): Run a function on a set of other CPUs.
- * <mask>	The set of cpus to run on.  Must not include the current cpu.
- * <func> 	The function to run. This must be fast and non-blocking.
- * <info>	An arbitrary pointer to pass to the function.
- * <wait>	If true, wait (atomically) until function
- *		has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-int smp_call_function_mask(cpumask_t mask,
-			   void (*func)(void *), void *info,
-			   int wait)
+void arch_send_call_function_single_ipi(int cpu)
 {
-	struct call_data_struct data;
-	cpumask_t allbutself;
-	int cpus;
-
-	spin_lock(&call_lock);
-	allbutself = cpu_online_map;
-	cpu_clear(smp_processor_id(), allbutself);
-
-	cpus_and(mask, mask, allbutself);
-	cpus = cpus_weight(mask);
-	if (!cpus) {
-		spin_unlock(&call_lock);
-		return 0;
-	}
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	call_data = &data;
-	mb(); /* ensure store to call_data precedes setting of IPI_CALL_FUNC*/
-
-	/* Send a message to other CPUs */
-	if (cpus_equal(mask, allbutself))
-		send_IPI_allbutself(IPI_CALL_FUNC);
-	else
-		send_IPI_mask(mask, IPI_CALL_FUNC);
-
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
-		cpu_relax();
-
-	if (wait)
-		while (atomic_read(&data.finished) != cpus)
-			cpu_relax();
-	call_data = NULL;
-
-	spin_unlock(&call_lock);
-	return 0;
-
+	send_IPI_single(cpu, IPI_CALL_FUNC_SINGLE);
 }
-EXPORT_SYMBOL(smp_call_function_mask);
 
-/*
- * this function sends a 'generic call function' IPI to all other CPUs
- * in the system.
- */
-
-/*
- *  [SUMMARY]	Run a function on all other CPUs.
- *  <func>	The function to run. This must be fast and non-blocking.
- *  <info>	An arbitrary pointer to pass to the function.
- *  <nonatomic>	currently unused.
- *  <wait>	If true, wait (atomically) until function has completed on other CPUs.
- *  [RETURNS]   0 on success, else a negative status code.
- *
- * Does not return until remote CPUs are nearly ready to execute <func> or are or have
- * executed.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-int
-smp_call_function (void (*func) (void *info), void *info, int nonatomic, int wait)
+void arch_send_call_function_ipi(cpumask_t mask)
 {
-	struct call_data_struct data;
-	int cpus;
-
-	spin_lock(&call_lock);
-	cpus = num_online_cpus() - 1;
-	if (!cpus) {
-		spin_unlock(&call_lock);
-		return 0;
-	}
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	call_data = &data;
-	mb();	/* ensure store to call_data precedes setting of IPI_CALL_FUNC */
-	send_IPI_allbutself(IPI_CALL_FUNC);
-
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
-		cpu_relax();
-
-	if (wait)
-		while (atomic_read(&data.finished) != cpus)
-			cpu_relax();
-	call_data = NULL;
-
-	spin_unlock(&call_lock);
-	return 0;
+	send_IPI_mask(mask, IPI_CALL_FUNC);
 }
-EXPORT_SYMBOL(smp_call_function);
 
 /*
  * this function calls the 'stop' function on all other CPUs in the system.
diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c
index d7ad42b77d41..03f1a9908afc 100644
--- a/arch/ia64/kernel/smpboot.c
+++ b/arch/ia64/kernel/smpboot.c
@@ -50,6 +50,7 @@
 #include <asm/machvec.h>
 #include <asm/mca.h>
 #include <asm/page.h>
+#include <asm/paravirt.h>
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
 #include <asm/processor.h>
@@ -317,7 +318,7 @@ ia64_sync_itc (unsigned int master)
 
 	go[MASTER] = 1;
 
-	if (smp_call_function_single(master, sync_master, NULL, 1, 0) < 0) {
+	if (smp_call_function_single(master, sync_master, NULL, 0) < 0) {
 		printk(KERN_ERR "sync_itc: failed to get attention of CPU %u!\n", master);
 		return;
 	}
@@ -395,14 +396,14 @@ smp_callin (void)
 
 	fix_b0_for_bsp();
 
-	lock_ipi_calllock();
+	ipi_call_lock_irq();
 	spin_lock(&vector_lock);
 	/* Setup the per cpu irq handling data structures */
 	__setup_vector_irq(cpuid);
 	cpu_set(cpuid, cpu_online_map);
 	per_cpu(cpu_state, cpuid) = CPU_ONLINE;
 	spin_unlock(&vector_lock);
-	unlock_ipi_calllock();
+	ipi_call_unlock_irq();
 
 	smp_setup_percpu_timer();
 
@@ -642,6 +643,7 @@ void __devinit smp_prepare_boot_cpu(void)
 	cpu_set(smp_processor_id(), cpu_online_map);
 	cpu_set(smp_processor_id(), cpu_callin_map);
 	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
+	paravirt_post_smp_prepare_boot_cpu();
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/ia64/kernel/sys_ia64.c b/arch/ia64/kernel/sys_ia64.c
index 1eda194b9559..bcbb6d8792d3 100644
--- a/arch/ia64/kernel/sys_ia64.c
+++ b/arch/ia64/kernel/sys_ia64.c
@@ -160,7 +160,7 @@ sys_pipe (void)
 	int fd[2];
 	int retval;
 
-	retval = do_pipe(fd);
+	retval = do_pipe_flags(fd, 0);
 	if (retval)
 		goto out;
 	retval = fd[0];
diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c
index aad1b7b1fff9..65c10a42c88f 100644
--- a/arch/ia64/kernel/time.c
+++ b/arch/ia64/kernel/time.c
@@ -24,6 +24,7 @@
 #include <asm/machvec.h>
 #include <asm/delay.h>
 #include <asm/hw_irq.h>
+#include <asm/paravirt.h>
 #include <asm/ptrace.h>
 #include <asm/sal.h>
 #include <asm/sections.h>
@@ -48,6 +49,15 @@ EXPORT_SYMBOL(last_cli_ip);
 
 #endif
 
+#ifdef CONFIG_PARAVIRT
+static void
+paravirt_clocksource_resume(void)
+{
+	if (pv_time_ops.clocksource_resume)
+		pv_time_ops.clocksource_resume();
+}
+#endif
+
 static struct clocksource clocksource_itc = {
 	.name           = "itc",
 	.rating         = 350,
@@ -56,6 +66,9 @@ static struct clocksource clocksource_itc = {
 	.mult           = 0, /*to be calculated*/
 	.shift          = 16,
 	.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
+#ifdef CONFIG_PARAVIRT
+	.resume		= paravirt_clocksource_resume,
+#endif
 };
 static struct clocksource *itc_clocksource;
 
@@ -157,6 +170,9 @@ timer_interrupt (int irq, void *dev_id)
 
 	profile_tick(CPU_PROFILING);
 
+	if (paravirt_do_steal_accounting(&new_itm))
+		goto skip_process_time_accounting;
+
 	while (1) {
 		update_process_times(user_mode(get_irq_regs()));
 
@@ -186,6 +202,8 @@ timer_interrupt (int irq, void *dev_id)
 		local_irq_disable();
 	}
 
+skip_process_time_accounting:
+
 	do {
 		/*
 		 * If we're too close to the next clock tick for
@@ -335,6 +353,11 @@ ia64_init_itm (void)
 		 */
 		clocksource_itc.rating = 50;
 
+	paravirt_init_missing_ticks_accounting(smp_processor_id());
+
+	/* avoid softlock up message when cpu is unplug and plugged again. */
+	touch_softlockup_watchdog();
+
 	/* Setup the CPU local timer tick */
 	ia64_cpu_local_tick();
 
diff --git a/arch/ia64/kernel/uncached.c b/arch/ia64/kernel/uncached.c
index e77995a6e3ed..8eff8c1d40a6 100644
--- a/arch/ia64/kernel/uncached.c
+++ b/arch/ia64/kernel/uncached.c
@@ -123,8 +123,7 @@ static int uncached_add_chunk(struct uncached_pool *uc_pool, int nid)
 	status = ia64_pal_prefetch_visibility(PAL_VISIBILITY_PHYSICAL);
 	if (status == PAL_VISIBILITY_OK_REMOTE_NEEDED) {
 		atomic_set(&uc_pool->status, 0);
-		status = smp_call_function(uncached_ipi_visibility, uc_pool,
-					   0, 1);
+		status = smp_call_function(uncached_ipi_visibility, uc_pool, 1);
 		if (status || atomic_read(&uc_pool->status))
 			goto failed;
 	} else if (status != PAL_VISIBILITY_OK)
@@ -146,7 +145,7 @@ static int uncached_add_chunk(struct uncached_pool *uc_pool, int nid)
 	if (status != PAL_STATUS_SUCCESS)
 		goto failed;
 	atomic_set(&uc_pool->status, 0);
-	status = smp_call_function(uncached_ipi_mc_drain, uc_pool, 0, 1);
+	status = smp_call_function(uncached_ipi_mc_drain, uc_pool, 1);
 	if (status || atomic_read(&uc_pool->status))
 		goto failed;
 
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 5929ab10a289..5a77206c2492 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -4,7 +4,6 @@
 #include <asm/system.h>
 #include <asm/pgtable.h>
 
-#define LOAD_OFFSET	(KERNEL_START - KERNEL_TR_PAGE_SIZE)
 #include <asm-generic/vmlinux.lds.h>
 
 #define IVT_TEXT							\
diff --git a/arch/ia64/kvm/Makefile b/arch/ia64/kvm/Makefile
index 112791dd2542..bf22fb9e6dcf 100644
--- a/arch/ia64/kvm/Makefile
+++ b/arch/ia64/kvm/Makefile
@@ -43,7 +43,8 @@ $(obj)/$(offsets-file): arch/ia64/kvm/asm-offsets.s
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/ia64/kvm/
 EXTRA_AFLAGS += -Ivirt/kvm -Iarch/ia64/kvm/
 
-common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o)
+common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
+		coalesced_mmio.o)
 
 kvm-objs := $(common-objs) kvm-ia64.o kvm_fw.o
 obj-$(CONFIG_KVM) += kvm.o
diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c
index 318b81100623..7a37d06376be 100644
--- a/arch/ia64/kvm/kvm-ia64.c
+++ b/arch/ia64/kvm/kvm-ia64.c
@@ -125,9 +125,9 @@ void kvm_arch_hardware_enable(void *garbage)
 				PAGE_KERNEL));
 	local_irq_save(saved_psr);
 	slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT);
+	local_irq_restore(saved_psr);
 	if (slot < 0)
 		return;
-	local_irq_restore(saved_psr);
 
 	spin_lock(&vp_lock);
 	status = ia64_pal_vp_init_env(kvm_vsa_base ?
@@ -160,9 +160,9 @@ void kvm_arch_hardware_disable(void *garbage)
 
 	local_irq_save(saved_psr);
 	slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT);
+	local_irq_restore(saved_psr);
 	if (slot < 0)
 		return;
-	local_irq_restore(saved_psr);
 
 	status = ia64_pal_vp_exit_env(host_iva);
 	if (status)
@@ -187,6 +187,9 @@ int kvm_dev_ioctl_check_extension(long ext)
 
 		r = 1;
 		break;
+	case KVM_CAP_COALESCED_MMIO:
+		r = KVM_COALESCED_MMIO_PAGE_OFFSET;
+		break;
 	default:
 		r = 0;
 	}
@@ -195,11 +198,11 @@ int kvm_dev_ioctl_check_extension(long ext)
 }
 
 static struct kvm_io_device *vcpu_find_mmio_dev(struct kvm_vcpu *vcpu,
-					gpa_t addr)
+					gpa_t addr, int len, int is_write)
 {
 	struct kvm_io_device *dev;
 
-	dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr);
+	dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr, len, is_write);
 
 	return dev;
 }
@@ -231,7 +234,7 @@ static int handle_mmio(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	kvm_run->exit_reason = KVM_EXIT_MMIO;
 	return 0;
 mmio:
-	mmio_dev = vcpu_find_mmio_dev(vcpu, p->addr);
+	mmio_dev = vcpu_find_mmio_dev(vcpu, p->addr, p->size, !p->dir);
 	if (mmio_dev) {
 		if (!p->dir)
 			kvm_iodevice_write(mmio_dev, p->addr, p->size,
@@ -395,7 +398,7 @@ static int handle_global_purge(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		if (kvm->vcpus[i]->cpu != -1) {
 			call_data.vcpu = kvm->vcpus[i];
 			smp_call_function_single(kvm->vcpus[i]->cpu,
-					vcpu_global_purge, &call_data, 0, 1);
+					vcpu_global_purge, &call_data, 1);
 		} else
 			printk(KERN_WARNING"kvm: Uninit vcpu received ipi!\n");
 
@@ -1035,14 +1038,6 @@ static void kvm_free_vmm_area(void)
 	}
 }
 
-/*
- * Make sure that a cpu that is being hot-unplugged does not have any vcpus
- * cached on it. Leave it as blank for IA64.
- */
-void decache_vcpus_on_cpu(int cpu)
-{
-}
-
 static void vti_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
 }
@@ -1258,6 +1253,7 @@ static int vti_vcpu_setup(struct kvm_vcpu *vcpu, int id)
 uninit:
 	kvm_vcpu_uninit(vcpu);
 fail:
+	local_irq_restore(psr);
 	return r;
 }
 
@@ -1460,6 +1456,9 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	return 0;
 }
 
+void kvm_arch_flush_shadow(struct kvm *kvm)
+{
+}
 
 long kvm_arch_dev_ioctl(struct file *filp,
 		unsigned int ioctl, unsigned long arg)
@@ -1693,7 +1692,7 @@ void kvm_vcpu_kick(struct kvm_vcpu *vcpu)
 		wake_up_interruptible(&vcpu->wq);
 
 	if (vcpu->guest_mode)
-		smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0, 0);
+		smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0);
 }
 
 int kvm_apic_set_irq(struct kvm_vcpu *vcpu, u8 vec, u8 trig)
diff --git a/arch/ia64/kvm/kvm_fw.c b/arch/ia64/kvm/kvm_fw.c
index 091f936c4485..0c69d9ec92d4 100644
--- a/arch/ia64/kvm/kvm_fw.c
+++ b/arch/ia64/kvm/kvm_fw.c
@@ -130,7 +130,7 @@ static struct ia64_pal_retval pal_cache_flush(struct kvm_vcpu *vcpu)
 	args.cache_type = gr29;
 	args.operation = gr30;
 	smp_call_function(remote_pal_cache_flush,
-				(void *)&args, 1, 1);
+				(void *)&args, 1);
 	if (args.status != 0)
 		printk(KERN_ERR"pal_cache_flush error!,"
 				"status:0x%lx\n", args.status);
diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c
index 544dc420c65e..d83125e1ed27 100644
--- a/arch/ia64/mm/discontig.c
+++ b/arch/ia64/mm/discontig.c
@@ -36,7 +36,6 @@ struct early_node_data {
 	struct ia64_node_data *node_data;
 	unsigned long pernode_addr;
 	unsigned long pernode_size;
-	struct bootmem_data bootmem_data;
 	unsigned long num_physpages;
 #ifdef CONFIG_ZONE_DMA
 	unsigned long num_dma_physpages;
@@ -75,17 +74,17 @@ pg_data_t *pgdat_list[MAX_NUMNODES];
 static int __init build_node_maps(unsigned long start, unsigned long len,
 				  int node)
 {
-	unsigned long cstart, epfn, end = start + len;
-	struct bootmem_data *bdp = &mem_data[node].bootmem_data;
+	unsigned long spfn, epfn, end = start + len;
+	struct bootmem_data *bdp = &bootmem_node_data[node];
 
 	epfn = GRANULEROUNDUP(end) >> PAGE_SHIFT;
-	cstart = GRANULEROUNDDOWN(start);
+	spfn = GRANULEROUNDDOWN(start) >> PAGE_SHIFT;
 
 	if (!bdp->node_low_pfn) {
-		bdp->node_boot_start = cstart;
+		bdp->node_min_pfn = spfn;
 		bdp->node_low_pfn = epfn;
 	} else {
-		bdp->node_boot_start = min(cstart, bdp->node_boot_start);
+		bdp->node_min_pfn = min(spfn, bdp->node_min_pfn);
 		bdp->node_low_pfn = max(epfn, bdp->node_low_pfn);
 	}
 
@@ -167,7 +166,7 @@ static void __init fill_pernode(int node, unsigned long pernode,
 {
 	void *cpu_data;
 	int cpus = early_nr_cpus_node(node);
-	struct bootmem_data *bdp = &mem_data[node].bootmem_data;
+	struct bootmem_data *bdp = &bootmem_node_data[node];
 
 	mem_data[node].pernode_addr = pernode;
 	mem_data[node].pernode_size = pernodesize;
@@ -222,20 +221,21 @@ static void __init fill_pernode(int node, unsigned long pernode,
 static int __init find_pernode_space(unsigned long start, unsigned long len,
 				     int node)
 {
-	unsigned long epfn;
+	unsigned long spfn, epfn;
 	unsigned long pernodesize = 0, pernode, pages, mapsize;
-	struct bootmem_data *bdp = &mem_data[node].bootmem_data;
+	struct bootmem_data *bdp = &bootmem_node_data[node];
 
+	spfn = start >> PAGE_SHIFT;
 	epfn = (start + len) >> PAGE_SHIFT;
 
-	pages = bdp->node_low_pfn - (bdp->node_boot_start >> PAGE_SHIFT);
+	pages = bdp->node_low_pfn - bdp->node_min_pfn;
 	mapsize = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
 
 	/*
 	 * Make sure this memory falls within this node's usable memory
 	 * since we may have thrown some away in build_maps().
 	 */
-	if (start < bdp->node_boot_start || epfn > bdp->node_low_pfn)
+	if (spfn < bdp->node_min_pfn || epfn > bdp->node_low_pfn)
 		return 0;
 
 	/* Don't setup this node's local space twice... */
@@ -297,7 +297,7 @@ static void __init reserve_pernode_space(void)
 		bdp = pdp->bdata;
 
 		/* First the bootmem_map itself */
-		pages = bdp->node_low_pfn - (bdp->node_boot_start>>PAGE_SHIFT);
+		pages = bdp->node_low_pfn - bdp->node_min_pfn;
 		size = bootmem_bootmap_pages(pages) << PAGE_SHIFT;
 		base = __pa(bdp->node_bootmem_map);
 		reserve_bootmem_node(pdp, base, size, BOOTMEM_DEFAULT);
@@ -440,7 +440,7 @@ void __init find_memory(void)
 	efi_memmap_walk(find_max_min_low_pfn, NULL);
 
 	for_each_online_node(node)
-		if (mem_data[node].bootmem_data.node_low_pfn) {
+		if (bootmem_node_data[node].node_low_pfn) {
 			node_clear(node, memory_less_mask);
 			mem_data[node].min_pfn = ~0UL;
 		}
@@ -460,14 +460,14 @@ void __init find_memory(void)
 		else if (node_isset(node, memory_less_mask))
 			continue;
 
-		bdp = &mem_data[node].bootmem_data;
+		bdp = &bootmem_node_data[node];
 		pernode = mem_data[node].pernode_addr;
 		pernodesize = mem_data[node].pernode_size;
 		map = pernode + pernodesize;
 
 		init_bootmem_node(pgdat_list[node],
 				  map>>PAGE_SHIFT,
-				  bdp->node_boot_start>>PAGE_SHIFT,
+				  bdp->node_min_pfn,
 				  bdp->node_low_pfn);
 	}
 
diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c
index d3ce8f3bcaa6..b0f615759e97 100644
--- a/arch/ia64/mm/hugetlbpage.c
+++ b/arch/ia64/mm/hugetlbpage.c
@@ -13,6 +13,7 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/pagemap.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/sysctl.h>
 #include <linux/log2.h>
@@ -21,10 +22,11 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-unsigned int hpage_shift=HPAGE_SHIFT_DEFAULT;
+unsigned int hpage_shift = HPAGE_SHIFT_DEFAULT;
+EXPORT_SYMBOL(hpage_shift);
 
 pte_t *
-huge_pte_alloc (struct mm_struct *mm, unsigned long addr)
+huge_pte_alloc(struct mm_struct *mm, unsigned long addr, unsigned long sz)
 {
 	unsigned long taddr = htlbpage_to_page(addr);
 	pgd_t *pgd;
@@ -75,7 +77,8 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
  * Don't actually need to do any preparation, but need to make sure
  * the address is in the right region.
  */
-int prepare_hugepage_range(unsigned long addr, unsigned long len)
+int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
 {
 	if (len & ~HPAGE_MASK)
 		return -EINVAL;
@@ -106,13 +109,19 @@ int pmd_huge(pmd_t pmd)
 {
 	return 0;
 }
+
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address, pmd_t *pmd, int write)
 {
 	return NULL;
 }
 
-void hugetlb_free_pgd_range(struct mmu_gather **tlb,
+void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 			unsigned long addr, unsigned long end,
 			unsigned long floor, unsigned long ceiling)
 {
@@ -149,7 +158,7 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr, u
 
 	/* Handle MAP_FIXED */
 	if (flags & MAP_FIXED) {
-		if (prepare_hugepage_range(addr, len))
+		if (prepare_hugepage_range(file, addr, len))
 			return -EINVAL;
 		return addr;
 	}
diff --git a/arch/ia64/sn/kernel/iomv.c b/arch/ia64/sn/kernel/iomv.c
index ab7e2fd40798..c77ebdf98119 100644
--- a/arch/ia64/sn/kernel/iomv.c
+++ b/arch/ia64/sn/kernel/iomv.c
@@ -63,7 +63,7 @@ EXPORT_SYMBOL(sn_io_addr);
 /**
  * __sn_mmiowb - I/O space memory barrier
  *
- * See include/asm-ia64/io.h and Documentation/DocBook/deviceiobook.tmpl
+ * See arch/ia64/include/asm/io.h and Documentation/DocBook/deviceiobook.tmpl
  * for details.
  *
  * On SN2, we wait for the PIO_WRITE_STATUS SHub register to clear.
diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c
index 53351c3cd7b1..96c31b4180c3 100644
--- a/arch/ia64/sn/kernel/irq.c
+++ b/arch/ia64/sn/kernel/irq.c
@@ -11,6 +11,7 @@
 #include <linux/irq.h>
 #include <linux/spinlock.h>
 #include <linux/init.h>
+#include <linux/rculist.h>
 #include <asm/sn/addrs.h>
 #include <asm/sn/arch.h>
 #include <asm/sn/intr.h>
diff --git a/arch/ia64/sn/kernel/sn2/sn_hwperf.c b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
index 8cc0c4753d89..636588e7e068 100644
--- a/arch/ia64/sn/kernel/sn2/sn_hwperf.c
+++ b/arch/ia64/sn/kernel/sn2/sn_hwperf.c
@@ -629,7 +629,7 @@ static int sn_hwperf_op_cpu(struct sn_hwperf_op_info *op_info)
 		if (use_ipi) {
 			/* use an interprocessor interrupt to call SAL */
 			smp_call_function_single(cpu, sn_hwperf_call_sal,
-				op_info, 1, 1);
+				op_info, 1);
 		}
 		else {
 			/* migrate the task before calling SAL */ 
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index 52175af299a0..53ebb6484495 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -350,7 +350,7 @@ void sn_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 }
 EXPORT_SYMBOL(sn_dma_sync_sg_for_device);
 
-int sn_dma_mapping_error(dma_addr_t dma_addr)
+int sn_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index de153de2ea9f..a5f864c445b2 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -296,6 +296,7 @@ config PREEMPT
 
 config SMP
 	bool "Symmetric multi-processing support"
+	select USE_GENERIC_SMP_HELPERS
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
diff --git a/arch/m32r/boot/compressed/misc.c b/arch/m32r/boot/compressed/misc.c
index 600d40e33495..d394292498c0 100644
--- a/arch/m32r/boot/compressed/misc.c
+++ b/arch/m32r/boot/compressed/misc.c
@@ -70,8 +70,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static unsigned char *input_data;
 static int input_len;
@@ -82,9 +80,6 @@ static unsigned long output_ptr = 0;
 
 #include "m32r_sio.c"
 
-static void *malloc(int size);
-static void free(void *where);
-
 static unsigned long free_mem_ptr;
 static unsigned long free_mem_end_ptr;
 
@@ -92,38 +87,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr == 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 void* memset(void* s, int c, size_t n)
 {
 	int i;
diff --git a/arch/m32r/kernel/m32r_ksyms.c b/arch/m32r/kernel/m32r_ksyms.c
index e6709fe950ba..16bcb189a383 100644
--- a/arch/m32r/kernel/m32r_ksyms.c
+++ b/arch/m32r/kernel/m32r_ksyms.c
@@ -43,9 +43,6 @@ EXPORT_SYMBOL(dcache_dummy);
 #endif
 EXPORT_SYMBOL(cpu_data);
 
-/* Global SMP stuff */
-EXPORT_SYMBOL(smp_call_function);
-
 /* TLB flushing */
 EXPORT_SYMBOL(smp_flush_tlb_page);
 #endif
diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c
index c837bc13b015..7577f971ea4e 100644
--- a/arch/m32r/kernel/smp.c
+++ b/arch/m32r/kernel/smp.c
@@ -35,22 +35,6 @@
 /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
 
 /*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
- */
-static DEFINE_SPINLOCK(call_lock);
-
-struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	atomic_t started;
-	atomic_t finished;
-	int wait;
-} __attribute__ ((__aligned__(SMP_CACHE_BYTES)));
-
-static struct call_data_struct *call_data;
-
-/*
  * For flush_cache_all()
  */
 static DEFINE_SPINLOCK(flushcache_lock);
@@ -96,9 +80,6 @@ void smp_invalidate_interrupt(void);
 void smp_send_stop(void);
 static void stop_this_cpu(void *);
 
-int smp_call_function(void (*) (void *), void *, int, int);
-void smp_call_function_interrupt(void);
-
 void smp_send_timer(void);
 void smp_ipi_timer_interrupt(struct pt_regs *);
 void smp_local_timer_interrupt(void);
@@ -231,7 +212,7 @@ void smp_flush_tlb_all(void)
 	local_irq_save(flags);
 	__flush_tlb_all();
 	local_irq_restore(flags);
-	smp_call_function(flush_tlb_all_ipi, NULL, 1, 1);
+	smp_call_function(flush_tlb_all_ipi, NULL, 1);
 	preempt_enable();
 }
 
@@ -524,7 +505,7 @@ void smp_invalidate_interrupt(void)
  *==========================================================================*/
 void smp_send_stop(void)
 {
-	smp_call_function(stop_this_cpu, NULL, 1, 0);
+	smp_call_function(stop_this_cpu, NULL, 0);
 }
 
 /*==========================================================================*
@@ -565,86 +546,14 @@ static void stop_this_cpu(void *dummy)
 	for ( ; ; );
 }
 
-/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
-/* Call function Routines                                                    */
-/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
-
-/*==========================================================================*
- * Name:         smp_call_function
- *
- * Description:  This routine sends a 'CALL_FUNCTION_IPI' to all other CPUs
- *               in the system.
- *
- * Born on Date: 2002.02.05
- *
- * Arguments:    *func - The function to run. This must be fast and
- *                       non-blocking.
- *               *info - An arbitrary pointer to pass to the function.
- *               nonatomic - currently unused.
- *               wait - If true, wait (atomically) until function has
- *                      completed on other CPUs.
- *
- * Returns:      0 on success, else a negative status code. Does not return
- *               until remote CPUs are nearly ready to execute <<func>> or
- *               are or have executed.
- *
- * Cautions:     You must not call this function with disabled interrupts or
- *               from a hardware interrupt handler, you may call it from a
- *               bottom half handler.
- *
- * Modification log:
- * Date       Who Description
- * ---------- --- --------------------------------------------------------
- *
- *==========================================================================*/
-int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
-	int wait)
+void arch_send_call_function_ipi(cpumask_t mask)
 {
-	struct call_data_struct data;
-	int cpus;
-
-#ifdef DEBUG_SMP
-	unsigned long flags;
-	__save_flags(flags);
-	if (!(flags & 0x0040))	/* Interrupt Disable NONONO */
-		BUG();
-#endif /* DEBUG_SMP */
-
-	/* Holding any lock stops cpus from going down. */
-	spin_lock(&call_lock);
-	cpus = num_online_cpus() - 1;
-
-	if (!cpus) {
-		spin_unlock(&call_lock);
-		return 0;
-	}
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	call_data = &data;
-	mb();
-
-	/* Send a message to all other CPUs and wait for them to respond */
-	send_IPI_allbutself(CALL_FUNCTION_IPI, 0);
-
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
-		barrier();
-
-	if (wait)
-		while (atomic_read(&data.finished) != cpus)
-			barrier();
-	spin_unlock(&call_lock);
+	send_IPI_mask(mask, CALL_FUNCTION_IPI, 0);
+}
 
-	return 0;
+void arch_send_call_function_single_ipi(int cpu)
+{
+	send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNC_SINGLE_IPI, 0);
 }
 
 /*==========================================================================*
@@ -666,27 +575,16 @@ int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
  *==========================================================================*/
 void smp_call_function_interrupt(void)
 {
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
-	int wait = call_data->wait;
-
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function
-	 */
-	mb();
-	atomic_inc(&call_data->started);
-	/*
-	 * At this point the info structure may be out of scope unless wait==1
-	 */
 	irq_enter();
-	(*func)(info);
+	generic_smp_call_function_interrupt();
 	irq_exit();
+}
 
-	if (wait) {
-		mb();
-		atomic_inc(&call_data->finished);
-	}
+void smp_call_function_single_interrupt(void)
+{
+	irq_enter();
+	generic_smp_call_function_single_interrupt();
+	irq_exit();
 }
 
 /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c
index 89ba4a0b5d51..46159a4e644b 100644
--- a/arch/m32r/kernel/traps.c
+++ b/arch/m32r/kernel/traps.c
@@ -40,6 +40,7 @@ extern void smp_invalidate_interrupt(void);
 extern void smp_call_function_interrupt(void);
 extern void smp_ipi_timer_interrupt(void);
 extern void smp_flush_cache_all_interrupt(void);
+extern void smp_call_function_single_interrupt(void);
 
 /*
  * for Boot AP function
@@ -103,7 +104,7 @@ void	set_eit_vector_entries(void)
 	eit_vector[186] = (unsigned long)smp_call_function_interrupt;
 	eit_vector[187] = (unsigned long)smp_ipi_timer_interrupt;
 	eit_vector[188] = (unsigned long)smp_flush_cache_all_interrupt;
-	eit_vector[189] = 0;
+	eit_vector[189] = (unsigned long)smp_call_function_single_interrupt;
 	eit_vector[190] = 0;
 	eit_vector[191] = 0;
 #endif
diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c
index 07c1af7dc0e2..cbc3c4c54566 100644
--- a/arch/m32r/mm/discontig.c
+++ b/arch/m32r/mm/discontig.c
@@ -20,7 +20,6 @@ extern char _end[];
 
 struct pglist_data *node_data[MAX_NUMNODES];
 EXPORT_SYMBOL(node_data);
-static bootmem_data_t node_bdata[MAX_NUMNODES] __initdata;
 
 pg_data_t m32r_node_data[MAX_NUMNODES];
 
@@ -81,7 +80,7 @@ unsigned long __init setup_memory(void)
 	for_each_online_node(nid) {
 		mp = &mem_prof[nid];
 		NODE_DATA(nid)=(pg_data_t *)&m32r_node_data[nid];
-		NODE_DATA(nid)->bdata = &node_bdata[nid];
+		NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 		min_pfn = mp->start_pfn;
 		max_pfn = mp->start_pfn + mp->pages;
 		bootmap_size = init_bootmem_node(NODE_DATA(nid), mp->free_pfn,
@@ -124,8 +123,7 @@ unsigned long __init setup_memory(void)
 	return max_low_pfn;
 }
 
-#define START_PFN(nid)	\
-	(NODE_DATA(nid)->bdata->node_boot_start >> PAGE_SHIFT)
+#define START_PFN(nid)		(NODE_DATA(nid)->bdata->node_min_pfn)
 #define MAX_LOW_PFN(nid)	(NODE_DATA(nid)->bdata->node_low_pfn)
 
 unsigned long __init zone_sizes_init(void)
@@ -148,8 +146,7 @@ unsigned long __init zone_sizes_init(void)
 		zholes_size[ZONE_DMA] = mp->holes;
 		holes += zholes_size[ZONE_DMA];
 
-		free_area_init_node(nid, NODE_DATA(nid), zones_size,
-			start_pfn, zholes_size);
+		free_area_init_node(nid, zones_size, start_pfn, zholes_size);
 	}
 
 	/*
@@ -163,4 +160,3 @@ unsigned long __init zone_sizes_init(void)
 
 	return holes;
 }
-
diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c
index bbd97c85bc5d..24d429f9358a 100644
--- a/arch/m32r/mm/init.c
+++ b/arch/m32r/mm/init.c
@@ -36,42 +36,6 @@ pgd_t swapper_pg_dir[1024];
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-	unsigned long i;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10));
-	for_each_online_pgdat(pgdat) {
-		unsigned long flags;
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-			page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageHighMem(page))
-				highmem++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk("%d pages of RAM\n", total);
-	printk("%d pages of HIGHMEM\n",highmem);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
 /*
  * Cache of MMU context last used.
  */
@@ -93,8 +57,7 @@ void free_initrd_mem(unsigned long, unsigned long);
 #endif
 
 /* It'd be good if these lines were in the standard header file. */
-#define START_PFN(nid)	\
-	(NODE_DATA(nid)->bdata->node_boot_start >> PAGE_SHIFT)
+#define START_PFN(nid)		(NODE_DATA(nid)->bdata->node_min_pfn)
 #define MAX_LOW_PFN(nid)	(NODE_DATA(nid)->bdata->node_low_pfn)
 
 #ifndef CONFIG_DISCONTIGMEM
@@ -123,7 +86,7 @@ unsigned long __init zone_sizes_init(void)
 	start_pfn = __MEMORY_START >> PAGE_SHIFT;
 #endif /* CONFIG_MMU */
 
-	free_area_init_node(0, NODE_DATA(0), zones_size, start_pfn, 0);
+	free_area_init_node(0, zones_size, start_pfn, 0);
 
 	return 0;
 }
@@ -252,4 +215,3 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 	printk (KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
 }
 #endif
-
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 55ea52fe6aca..8c5e1de68fcb 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -490,28 +490,6 @@ config ATARI_MFPSER
 	  Note for Falcon users: You also have an MFP port, it's just not
 	  wired to the outside... But you could use the port under Linux.
 
-config ATARI_SCC
-	tristate "Atari SCC serial support"
-	depends on ATARI
-	---help---
-	  If you have serial ports based on a Zilog SCC chip (Modem2, Serial2,
-	  LAN) and like to use them under Linux, say Y. All built-in SCC's are
-	  supported (TT, MegaSTE, Falcon), and also the ST-ESCC. If you have
-	  two connectors for channel A (Serial2 and LAN), they are visible as
-	  two separate devices.
-
-	  To compile this driver as a module, choose M here.
-
-config ATARI_SCC_DMA
-	bool "Atari SCC serial DMA support"
-	depends on ATARI_SCC
-	help
-	  This enables DMA support for receiving data on channel A of the SCC.
-	  If you have a TT you may say Y here and read
-	  drivers/char/atari_SCC.README. All other users should say N here,
-	  because only the TT has SCC-DMA, even if your machine keeps claiming
-	  so at boot time.
-
 config ATARI_MIDI
 	tristate "Atari MIDI serial support"
 	depends on ATARI
@@ -578,18 +556,6 @@ config MAC_HID
 	depends on INPUT_ADBHID
 	default y
 
-config ADB_KEYBOARD
-	bool "Support for ADB keyboard (old driver)"
-	depends on MAC && !INPUT_ADBHID
-	help
-	  This option allows you to use an ADB keyboard attached to your
-	  machine. Note that this disables any other (ie. PS/2) keyboard
-	  support, even if your machine is physically capable of using both at
-	  the same time.
-
-	  If you use an ADB keyboard (4 pin connector), say Y here.
-	  If you use a PS/2 keyboard (6 pin connector), say N here.
-
 config HPDCA
 	tristate "HP DCA serial support"
 	depends on DIO && SERIAL_8250
@@ -640,7 +606,7 @@ config DN_SERIAL
 
 config SERIAL_CONSOLE
 	bool "Support for serial port console"
-	depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_SCC=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
+	depends on (AMIGA || ATARI || MAC || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || MAC_SCC=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL)
 	---help---
 	  If you say Y here, it will be possible to use a serial port as the
 	  system console (the system console is the device which receives all
diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile
index b15173f28a23..8133dbc44964 100644
--- a/arch/m68k/Makefile
+++ b/arch/m68k/Makefile
@@ -13,7 +13,7 @@
 # Copyright (C) 1994 by Hamish Macdonald
 #
 
-KBUILD_DEFCONFIG := amiga_defconfig
+KBUILD_DEFCONFIG := multi_defconfig
 
 # override top level makefile
 AS += -m68020
diff --git a/arch/m68k/amiga/chipram.c b/arch/m68k/amiga/chipram.c
index cbe36538af47..61df1d33c050 100644
--- a/arch/m68k/amiga/chipram.c
+++ b/arch/m68k/amiga/chipram.c
@@ -9,6 +9,7 @@
 
 #include <linux/types.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index 50f5daab46b7..df679d96b1cb 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -36,14 +36,11 @@
 #include <asm/machdep.h>
 #include <asm/io.h>
 
-unsigned long amiga_model;
-EXPORT_SYMBOL(amiga_model);
+static unsigned long amiga_model;
 
 unsigned long amiga_eclock;
 EXPORT_SYMBOL(amiga_eclock);
 
-unsigned long amiga_masterclock;
-
 unsigned long amiga_colorclock;
 EXPORT_SYMBOL(amiga_colorclock);
 
@@ -51,7 +48,9 @@ unsigned long amiga_chipset;
 EXPORT_SYMBOL(amiga_chipset);
 
 unsigned char amiga_vblank;
-unsigned char amiga_psfreq;
+EXPORT_SYMBOL(amiga_vblank);
+
+static unsigned char amiga_psfreq;
 
 struct amiga_hw_present amiga_hw_present;
 EXPORT_SYMBOL(amiga_hw_present);
@@ -92,8 +91,6 @@ static char *amiga_models[] __initdata = {
 static char amiga_model_name[13] = "Amiga ";
 
 static void amiga_sched_init(irq_handler_t handler);
-/* amiga specific irq functions */
-extern void amiga_init_IRQ(void);
 static void amiga_get_model(char *model);
 static int amiga_get_hardware_list(char *buffer);
 /* amiga specific timer functions */
@@ -107,8 +104,6 @@ static void amiga_reset(void);
 extern void amiga_init_sound(void);
 static void amiga_mem_console_write(struct console *co, const char *b,
 				    unsigned int count);
-void amiga_serial_console_write(struct console *co, const char *s,
-				unsigned int count);
 #ifdef CONFIG_HEARTBEAT
 static void amiga_heartbeat(int on);
 #endif
@@ -418,8 +413,7 @@ void __init config_amiga(void)
 	mach_heartbeat = amiga_heartbeat;
 #endif
 
-	/* Fill in the clock values (based on the 700 kHz E-Clock) */
-	amiga_masterclock = 40*amiga_eclock;	/* 28 MHz */
+	/* Fill in the clock value (based on the 700 kHz E-Clock) */
 	amiga_colorclock = 5*amiga_eclock;	/* 3.5 MHz */
 
 	/* clear all DMA bits */
@@ -817,8 +811,8 @@ static void amiga_serial_putc(char c)
 		;
 }
 
-void amiga_serial_console_write(struct console *co, const char *s,
-				unsigned int count)
+static void amiga_serial_console_write(struct console *co, const char *s,
+				       unsigned int count)
 {
 	while (count--) {
 		if (*s == '\n')
@@ -827,7 +821,7 @@ void amiga_serial_console_write(struct console *co, const char *s,
 	}
 }
 
-#ifdef CONFIG_SERIAL_CONSOLE
+#if 0
 void amiga_serial_puts(const char *s)
 {
 	amiga_serial_console_write(NULL, s, strlen(s));
diff --git a/arch/m68k/atari/debug.c b/arch/m68k/atari/debug.c
index 043ddbc61c7b..702b15ccfab7 100644
--- a/arch/m68k/atari/debug.c
+++ b/arch/m68k/atari/debug.c
@@ -20,14 +20,6 @@
 #include <asm/atarihw.h>
 #include <asm/atariints.h>
 
-/* Flag that Modem1 port is already initialized and used */
-int atari_MFP_init_done;
-EXPORT_SYMBOL(atari_MFP_init_done);
-
-/* Flag that Modem1 port is already initialized and used */
-int atari_SCC_init_done;
-EXPORT_SYMBOL(atari_SCC_init_done);
-
 /* Can be set somewhere, if a SCC master reset has already be done and should
  * not be repeated; used by kgdb */
 int atari_SCC_reset_done;
@@ -47,8 +39,8 @@ static inline void ata_mfp_out(char c)
 	mfp.usart_dta = c;
 }
 
-void atari_mfp_console_write(struct console *co, const char *str,
-			     unsigned int count)
+static void atari_mfp_console_write(struct console *co, const char *str,
+				    unsigned int count)
 {
 	while (count--) {
 		if (*str == '\n')
@@ -66,8 +58,8 @@ static inline void ata_scc_out(char c)
 	scc.cha_b_data = c;
 }
 
-void atari_scc_console_write(struct console *co, const char *str,
-			     unsigned int count)
+static void atari_scc_console_write(struct console *co, const char *str,
+				    unsigned int count)
 {
 	while (count--) {
 		if (*str == '\n')
@@ -83,8 +75,8 @@ static inline void ata_midi_out(char c)
 	acia.mid_data = c;
 }
 
-void atari_midi_console_write(struct console *co, const char *str,
-			      unsigned int count)
+static void atari_midi_console_write(struct console *co, const char *str,
+				     unsigned int count)
 {
 	while (count--) {
 		if (*str == '\n')
@@ -136,7 +128,7 @@ static void atari_par_console_write(struct console *co, const char *str,
 	}
 }
 
-#ifdef CONFIG_SERIAL_CONSOLE
+#if 0
 int atari_mfp_console_wait_key(struct console *co)
 {
 	while (!(mfp.rcv_stat & 0x80))	/* wait for rx buf filled */
@@ -166,11 +158,7 @@ int atari_midi_console_wait_key(struct console *co)
  * SCC serial ports. They're used by the debugging interface, kgdb, and the
  * serial console code.
  */
-#ifndef CONFIG_SERIAL_CONSOLE
 static void __init atari_init_mfp_port(int cflag)
-#else
-void atari_init_mfp_port(int cflag)
-#endif
 {
 	/*
 	 * timer values for 1200...115200 bps; > 38400 select 110, 134, or 150
@@ -193,8 +181,6 @@ void atari_init_mfp_port(int cflag)
 	mfp.tim_dt_d = baud_table[baud];
 	mfp.tim_ct_cd |= 0x01;		/* start timer D, 1:4 */
 	mfp.trn_stat |= 0x01;		/* enable TX */
-
-	atari_MFP_init_done = 1;
 }
 
 #define SCC_WRITE(reg, val)				\
@@ -214,11 +200,7 @@ void atari_init_mfp_port(int cflag)
 			MFPDELAY();			\
 	} while (0)
 
-#ifndef CONFIG_SERIAL_CONSOLE
 static void __init atari_init_scc_port(int cflag)
-#else
-void atari_init_scc_port(int cflag)
-#endif
 {
 	extern int atari_SCC_reset_done;
 	static int clksrc_table[9] =
@@ -277,14 +259,9 @@ void atari_init_scc_port(int cflag)
 	SCC_WRITE(5, reg5 | 8);
 
 	atari_SCC_reset_done = 1;
-	atari_SCC_init_done = 1;
 }
 
-#ifndef CONFIG_SERIAL_CONSOLE
 static void __init atari_init_midi_port(int cflag)
-#else
-void atari_init_midi_port(int cflag)
-#endif
 {
 	int baud = cflag & CBAUD;
 	int csize = ((cflag & CSIZE) == CS8) ? 0x10 : 0x00;
diff --git a/arch/m68k/fpsp040/Makefile b/arch/m68k/fpsp040/Makefile
index 0214d2f6f8b0..9506d883ace5 100644
--- a/arch/m68k/fpsp040/Makefile
+++ b/arch/m68k/fpsp040/Makefile
@@ -10,7 +10,6 @@ obj-y    := bindec.o binstr.o decbin.o do_func.o gen_except.o get_op.o \
 	    x_bsun.o x_fline.o x_operr.o x_ovfl.o x_snan.o x_store.o \
 	    x_unfl.o x_unimp.o x_unsupp.o bugfix.o skeleton.o
 
-EXTRA_AFLAGS := -traditional
 EXTRA_LDFLAGS := -x
 
 $(OS_OBJS): fpsp.h
diff --git a/arch/m68k/ifpsp060/Makefile b/arch/m68k/ifpsp060/Makefile
index 2fe8472cb5e3..43b435049452 100644
--- a/arch/m68k/ifpsp060/Makefile
+++ b/arch/m68k/ifpsp060/Makefile
@@ -6,5 +6,4 @@
 
 obj-y := fskeleton.o iskeleton.o os.o
 
-EXTRA_AFLAGS := -traditional
 EXTRA_LDFLAGS := -x
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index 7a62a718143b..3a7f62225504 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -16,5 +16,3 @@ devres-y = ../../../kernel/irq/devres.o
 
 obj-$(CONFIG_PCI)	+= bios32.o
 obj-y$(CONFIG_MMU_SUN3) += dma.o	# no, it's not a typo
-
-EXTRA_AFLAGS := -traditional
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
index a9fb83a8c180..ea1e44da19b9 100644
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -26,6 +26,7 @@
 
 #include <asm/bootinfo.h>
 #include <asm/setup.h>
+#include <asm/fpu.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
@@ -40,6 +41,11 @@
 #include <asm/dvma.h>
 #endif
 
+#if !FPSTATESIZE || !NR_IRQS
+#warning No CPU/platform type selected, your kernel will not work!
+#warning Are you building an allnoconfig kernel?
+#endif
+
 unsigned long m68k_machtype;
 EXPORT_SYMBOL(m68k_machtype);
 unsigned long m68k_cputype;
@@ -116,6 +122,7 @@ extern int bvme6000_parse_bootinfo(const struct bi_record *);
 extern int mvme16x_parse_bootinfo(const struct bi_record *);
 extern int mvme147_parse_bootinfo(const struct bi_record *);
 extern int hp300_parse_bootinfo(const struct bi_record *);
+extern int apollo_parse_bootinfo(const struct bi_record *);
 
 extern void config_amiga(void);
 extern void config_atari(void);
@@ -183,6 +190,8 @@ static void __init m68k_parse_bootinfo(const struct bi_record *record)
 				unknown = mvme147_parse_bootinfo(record);
 			else if (MACH_IS_HP300)
 				unknown = hp300_parse_bootinfo(record);
+			else if (MACH_IS_APOLLO)
+				unknown = apollo_parse_bootinfo(record);
 			else
 				unknown = 1;
 		}
diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds
index 7537cc5e6159..99b0784c0552 100644
--- a/arch/m68k/kernel/vmlinux-std.lds
+++ b/arch/m68k/kernel/vmlinux-std.lds
@@ -1,6 +1,7 @@
 /* ld script to make m68k Linux kernel */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
 
 OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
 OUTPUT_ARCH(m68k)
@@ -41,7 +42,7 @@ SECTIONS
   _edata = .;			/* End of data section */
 
   /* will be freed after init */
-  . = ALIGN(4096);		/* Init code and data */
+  . = ALIGN(PAGE_SIZE);		/* Init code and data */
   __init_begin = .;
   .init.text : {
 	_sinittext = .;
diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds
index cdc313e7c299..8a4919e4d36a 100644
--- a/arch/m68k/kernel/vmlinux-sun3.lds
+++ b/arch/m68k/kernel/vmlinux-sun3.lds
@@ -1,6 +1,7 @@
 /* ld script to make m68k Linux kernel */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
 
 OUTPUT_FORMAT("elf32-m68k", "elf32-m68k", "elf32-m68k")
 OUTPUT_ARCH(m68k)
@@ -34,7 +35,7 @@ SECTIONS
   _edata = .;
 
   /* will be freed after init */
-  . = ALIGN(8192);	/* Init code and data */
+  . = ALIGN(PAGE_SIZE);	/* Init code and data */
 __init_begin = .;
 	.init.text : {
 		_sinittext = .;
@@ -61,12 +62,12 @@ __init_begin = .;
 	}
 	SECURITY_INIT
 #ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(8192);
+	. = ALIGN(PAGE_SIZE);
 	__initramfs_start = .;
 	.init.ramfs : { *(.init.ramfs) }
 	__initramfs_end = .;
 #endif
-	. = ALIGN(8192);
+	. = ALIGN(PAGE_SIZE);
 	__init_end = .;
 	.data.init.task : { *(.data.init_task) }
 
diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile
index a18af095cd7c..af9abf8d9d98 100644
--- a/arch/m68k/lib/Makefile
+++ b/arch/m68k/lib/Makefile
@@ -2,7 +2,5 @@
 # Makefile for m68k-specific library files..
 #
 
-EXTRA_AFLAGS := -traditional
-
 lib-y	:= ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
 	   checksum.o string.o uaccess.o
diff --git a/arch/m68k/mac/Makefile b/arch/m68k/mac/Makefile
index 1d265ba365ad..daebd80bdef0 100644
--- a/arch/m68k/mac/Makefile
+++ b/arch/m68k/mac/Makefile
@@ -2,5 +2,5 @@
 # Makefile for Linux arch/m68k/mac source directory
 #
 
-obj-y		:= config.o bootparse.o macints.o iop.o via.o oss.o psc.o \
+obj-y		:= config.o macints.o iop.o via.o oss.o psc.o \
 			baboon.o macboing.o debug.o misc.o
diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c
index 673a1085984d..c7b25b0aacff 100644
--- a/arch/m68k/mac/baboon.c
+++ b/arch/m68k/mac/baboon.c
@@ -11,7 +11,6 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/ide.h>
 
 #include <asm/traps.h>
 #include <asm/bootinfo.h>
@@ -23,9 +22,7 @@
 /* #define DEBUG_IRQS */
 
 int baboon_present;
-volatile struct baboon *baboon;
-
-irqreturn_t baboon_irq(int, void *);
+static volatile struct baboon *baboon;
 
 #if 0
 extern int macide_ack_intr(struct ata_channel *);
@@ -50,20 +47,10 @@ void __init baboon_init(void)
 }
 
 /*
- * Register the Baboon interrupt dispatcher on nubus slot $C.
- */
-
-void __init baboon_register_interrupts(void)
-{
-	request_irq(IRQ_NUBUS_C, baboon_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
-		    "baboon", (void *) baboon);
-}
-
-/*
  * Baboon interrupt handler. This works a lot like a VIA.
  */
 
-irqreturn_t baboon_irq(int irq, void *dev_id)
+static irqreturn_t baboon_irq(int irq, void *dev_id)
 {
 	int irq_bit, irq_num;
 	unsigned char events;
@@ -95,6 +82,16 @@ irqreturn_t baboon_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/*
+ * Register the Baboon interrupt dispatcher on nubus slot $C.
+ */
+
+void __init baboon_register_interrupts(void)
+{
+	request_irq(IRQ_NUBUS_C, baboon_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
+		    "baboon", (void *) baboon);
+}
+
 void baboon_irq_enable(int irq) {
 #ifdef DEBUG_IRQUSE
 	printk("baboon_irq_enable(%d)\n", irq);
diff --git a/arch/m68k/mac/bootparse.c b/arch/m68k/mac/bootparse.c
deleted file mode 100644
index 36d223609823..000000000000
--- a/arch/m68k/mac/bootparse.c
+++ /dev/null
@@ -1,122 +0,0 @@
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/bootinfo.h>
-#include <asm/macintosh.h>
-
-/*
- *	Booter vars
- */
-
-int boothowto;
-int _boothowto;
-
-/*
- *	Called early to parse the environment (passed to us from the booter)
- *	into a bootinfo struct. Will die as soon as we have our own booter
- */
-
-#define atol(x)	simple_strtoul(x,NULL,0)
-
-void parse_booter(char *env)
-{
-	char *name;
-	char *value;
-#if 0
-	while(0 && *env)
-#else
-	while(*env)
-#endif
-	{
-		name=env;
-		value=name;
-		while(*value!='='&&*value)
-			value++;
-		if(*value=='=')
-			*value++=0;
-		env=value;
-		while(*env)
-			env++;
-		env++;
-#if 0
-		if(strcmp(name,"VIDEO_ADDR")==0)
-			mac_mch.videoaddr=atol(value);
-		if(strcmp(name,"ROW_BYTES")==0)
-			mac_mch.videorow=atol(value);
-		if(strcmp(name,"SCREEN_DEPTH")==0)
-			mac_mch.videodepth=atol(value);
-		if(strcmp(name,"DIMENSIONS")==0)
-			mac_mch.dimensions=atol(value);
-#endif
-		if(strcmp(name,"BOOTTIME")==0)
-			mac_bi_data.boottime=atol(value);
-		if(strcmp(name,"GMTBIAS")==0)
-			mac_bi_data.gmtbias=atol(value);
-		if(strcmp(name,"BOOTERVER")==0)
-			mac_bi_data.bootver=atol(value);
-		if(strcmp(name,"MACOS_VIDEO")==0)
-			mac_bi_data.videological=atol(value);
-		if(strcmp(name,"MACOS_SCC")==0)
-			mac_bi_data.sccbase=atol(value);
-		if(strcmp(name,"MACHINEID")==0)
-			mac_bi_data.id=atol(value);
-		if(strcmp(name,"MEMSIZE")==0)
-			mac_bi_data.memsize=atol(value);
-		if(strcmp(name,"SERIAL_MODEM_FLAGS")==0)
-			mac_bi_data.serialmf=atol(value);
-		if(strcmp(name,"SERIAL_MODEM_HSKICLK")==0)
-			mac_bi_data.serialhsk=atol(value);
-		if(strcmp(name,"SERIAL_MODEM_GPICLK")==0)
-			mac_bi_data.serialgpi=atol(value);
-		if(strcmp(name,"SERIAL_PRINT_FLAGS")==0)
-			mac_bi_data.printmf=atol(value);
-		if(strcmp(name,"SERIAL_PRINT_HSKICLK")==0)
-			mac_bi_data.printhsk=atol(value);
-		if(strcmp(name,"SERIAL_PRINT_GPICLK")==0)
-			mac_bi_data.printgpi=atol(value);
-		if(strcmp(name,"PROCESSOR")==0)
-			mac_bi_data.cpuid=atol(value);
-		if(strcmp(name,"ROMBASE")==0)
-			mac_bi_data.rombase=atol(value);
-		if(strcmp(name,"TIMEDBRA")==0)
-			mac_bi_data.timedbra=atol(value);
-		if(strcmp(name,"ADBDELAY")==0)
-			mac_bi_data.adbdelay=atol(value);
-	}
-#if 0	/* XXX: TODO with m68k_mach_* */
-	/* Fill in the base stuff */
-	boot_info.machtype=MACH_MAC;
-	/* Read this from the macinfo we got ! */
-/*	boot_info.cputype=CPU_68020|FPUB_68881;*/
-/*	boot_info.memory[0].addr=0;*/
-/*	boot_info.memory[0].size=((mac_bi_data.id>>7)&31)<<20;*/
-	boot_info.num_memory=1;		/* On a MacII */
-	boot_info.ramdisk_size=0;	/* For now */
-	*boot_info.command_line=0;
-#endif
- }
-
-
-void print_booter(char *env)
-{
-	char *name;
-	char *value;
-	while(*env)
-	{
-		name=env;
-		value=name;
-		while(*value!='='&&*value)
-			value++;
-		if(*value=='=')
-			*value++=0;
-		env=value;
-		while(*env)
-			env++;
-		env++;
-		printk("%s=%s\n", name,value);
-	}
- }
-
-
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index ad3e3bacae39..c45e18449f32 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -46,7 +46,6 @@
 /* Mac bootinfo struct */
 
 struct mac_booter_data mac_bi_data;
-int mac_bisize = sizeof mac_bi_data;
 
 /* New m68k bootinfo stuff and videobase */
 
@@ -55,10 +54,8 @@ extern struct mem_info m68k_memory[NUM_MEMINFO];
 
 extern struct mem_info m68k_ramdisk;
 
-void *mac_env;					/* Loaded by the boot asm */
-
 /* The phys. video addr. - might be bogus on some machines */
-unsigned long mac_orig_videoaddr;
+static unsigned long mac_orig_videoaddr;
 
 /* Mac specific timer functions */
 extern unsigned long mac_gettimeoffset(void);
@@ -79,6 +76,8 @@ extern void mac_mksound(unsigned int, unsigned int);
 extern void nubus_sweep_video(void);
 
 static void mac_get_model(char *str);
+static void mac_identify(void);
+static void mac_report_hardware(void);
 
 static void __init mac_sched_init(irq_handler_t vector)
 {
@@ -765,7 +764,7 @@ static struct mac_model mac_data_table[] = {
 	}
 };
 
-void __init mac_identify(void)
+static void __init mac_identify(void)
 {
 	struct mac_model *m;
 
@@ -821,7 +820,7 @@ void __init mac_identify(void)
 	baboon_init();
 }
 
-void __init mac_report_hardware(void)
+static void __init mac_report_hardware(void)
 {
 	printk(KERN_INFO "Apple Macintosh %s\n", macintosh_config->name);
 }
diff --git a/arch/m68k/mac/debug.c b/arch/m68k/mac/debug.c
index e8a57138b4a6..2165740786a5 100644
--- a/arch/m68k/mac/debug.c
+++ b/arch/m68k/mac/debug.c
@@ -51,6 +51,8 @@ extern void mac_serial_print(const char *);
 static int peng, line;
 #endif
 
+#if 0
+
 void mac_debugging_short(int pos, short num)
 {
 #ifdef DEBUG_SCREEN
@@ -125,6 +127,8 @@ void mac_debugging_long(int pos, long addr)
 #endif
 }
 
+#endif  /*  0  */
+
 #ifdef DEBUG_SERIAL
 /*
  * TODO: serial debug code
@@ -142,12 +146,6 @@ struct mac_SCC {
 
 # define scc (*((volatile struct mac_SCC*)mac_bi_data.sccbase))
 
-/* Flag that serial port is already initialized and used */
-int mac_SCC_init_done;
-/* Can be set somewhere, if a SCC master reset has already be done and should
- * not be repeated; used by kgdb */
-int mac_SCC_reset_done;
-
 static int scc_port = -1;
 
 static struct console mac_console_driver = {
@@ -171,8 +169,8 @@ static struct console mac_console_driver = {
  * this driver if Mac.
  */
 
-void mac_debug_console_write(struct console *co, const char *str,
-			     unsigned int count)
+static void mac_debug_console_write(struct console *co, const char *str,
+				    unsigned int count)
 {
 	mac_serial_print(str);
 }
@@ -209,8 +207,8 @@ static inline void mac_scca_out(char c)
 	scc.cha_a_data = c;
 }
 
-void mac_sccb_console_write(struct console *co, const char *str,
-			    unsigned int count)
+static void mac_sccb_console_write(struct console *co, const char *str,
+				   unsigned int count)
 {
 	while (count--) {
 		if (*str == '\n')
@@ -219,8 +217,8 @@ void mac_sccb_console_write(struct console *co, const char *str,
 	}
 }
 
-void mac_scca_console_write(struct console *co, const char *str,
-			    unsigned int count)
+static void mac_scca_console_write(struct console *co, const char *str,
+				   unsigned int count)
 {
 	while (count--) {
 		if (*str == '\n')
@@ -265,14 +263,8 @@ void mac_scca_console_write(struct console *co, const char *str,
 		    barrier();				\
 	} while(0)
 
-#ifndef CONFIG_SERIAL_CONSOLE
 static void __init mac_init_scc_port(int cflag, int port)
-#else
-void mac_init_scc_port(int cflag, int port)
-#endif
 {
-	extern int mac_SCC_reset_done;
-
 	/*
 	 * baud rates: 1200, 1800, 2400, 4800, 9600, 19.2k, 38.4k, 57.6k, 115.2k
 	 */
@@ -340,22 +332,9 @@ void mac_init_scc_port(int cflag, int port)
 		SCCA_WRITE(3, reg3 | 1);
 		SCCA_WRITE(5, reg5 | 8);
 	}
-
-	mac_SCC_reset_done = 1;
-	mac_SCC_init_done = 1;
 }
 #endif /* DEBUG_SERIAL */
 
-void mac_init_scca_port(int cflag)
-{
-	mac_init_scc_port(cflag, 0);
-}
-
-void mac_init_sccb_port(int cflag)
-{
-	mac_init_scc_port(cflag, 1);
-}
-
 static int __init mac_debug_setup(char *arg)
 {
 	if (!MACH_IS_MAC)
diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c
index 3c943d2ec570..43d83e054b8e 100644
--- a/arch/m68k/mac/oss.c
+++ b/arch/m68k/mac/oss.c
@@ -30,8 +30,8 @@
 int oss_present;
 volatile struct mac_oss *oss;
 
-irqreturn_t oss_irq(int, void *);
-irqreturn_t oss_nubus_irq(int, void *);
+static irqreturn_t oss_irq(int, void *);
+static irqreturn_t oss_nubus_irq(int, void *);
 
 extern irqreturn_t via1_irq(int, void *);
 extern irqreturn_t mac_scc_dispatch(int, void *);
@@ -92,7 +92,7 @@ void __init oss_nubus_init(void)
  * and SCSI; everything else is routed to its own autovector IRQ.
  */
 
-irqreturn_t oss_irq(int irq, void *dev_id)
+static irqreturn_t oss_irq(int irq, void *dev_id)
 {
 	int events;
 
@@ -126,7 +126,7 @@ irqreturn_t oss_irq(int irq, void *dev_id)
  * Unlike the VIA/RBV this is on its own autovector interrupt level.
  */
 
-irqreturn_t oss_nubus_irq(int irq, void *dev_id)
+static irqreturn_t oss_nubus_irq(int irq, void *dev_id)
 {
 	int events, irq_bit, i;
 
diff --git a/arch/m68k/mac/psc.c b/arch/m68k/mac/psc.c
index d66f723b17c3..f84a4dd64f94 100644
--- a/arch/m68k/mac/psc.c
+++ b/arch/m68k/mac/psc.c
@@ -36,7 +36,7 @@ irqreturn_t psc_irq(int, void *);
  * Debugging dump, used in various places to see what's going on.
  */
 
-void psc_debug_dump(void)
+static void psc_debug_dump(void)
 {
 	int	i;
 
@@ -55,7 +55,7 @@ void psc_debug_dump(void)
  * expanded to cover what I think are the other 7 channels.
  */
 
-void psc_dma_die_die_die(void)
+static void psc_dma_die_die_die(void)
 {
 	int i;
 
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index fa485df4160e..1bdb03c73c0f 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -27,7 +27,6 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/init.h>
-#include <linux/ide.h>
 #include <linux/module.h>
 
 #include <asm/bootinfo.h>
@@ -45,7 +44,7 @@ volatile long *via_memory_bogon=(long *)&via_memory_bogon;
 int rbv_present;
 int via_alt_mapping;
 EXPORT_SYMBOL(via_alt_mapping);
-__u8 rbv_clear;
+static __u8 rbv_clear;
 
 /*
  * Globals for accessing the VIA chip registers without having to
diff --git a/arch/m68k/math-emu/Makefile b/arch/m68k/math-emu/Makefile
index 539940401814..a0935bf98362 100644
--- a/arch/m68k/math-emu/Makefile
+++ b/arch/m68k/math-emu/Makefile
@@ -2,8 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-EXTRA_AFLAGS := -traditional
-
 #EXTRA_AFLAGS += -DFPU_EMU_DEBUG
 #EXTRA_CFLAGS += -DFPU_EMU_DEBUG
 
diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c
index d8fb9c5303cc..81bb08ceec18 100644
--- a/arch/m68k/mm/init.c
+++ b/arch/m68k/mm/init.c
@@ -32,8 +32,6 @@
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-static bootmem_data_t __initdata bootmem_data[MAX_NUMNODES];
-
 pg_data_t pg_data_map[MAX_NUMNODES];
 EXPORT_SYMBOL(pg_data_map);
 
@@ -58,7 +56,7 @@ void __init m68k_setup_node(int node)
 		pg_data_table[i] = pg_data_map + node;
 	}
 #endif
-	pg_data_map[node].bdata = bootmem_data + node;
+	pg_data_map[node].bdata = bootmem_node_data + node;
 	node_set_online(node);
 }
 
@@ -71,36 +69,6 @@ void __init m68k_setup_node(int node)
 void *empty_zero_page;
 EXPORT_SYMBOL(empty_zero_page);
 
-void show_mem(void)
-{
-	pg_data_t *pgdat;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-	int cached = 0;
-	int i;
-
-	printk("\nMem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat->node_mem_map + i;
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-		}
-	}
-	printk("%d pages of RAM\n",total);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
 extern void init_pointer_table(unsigned long ptable);
 
 /* References to section boundaries */
diff --git a/arch/m68k/mm/motorola.c b/arch/m68k/mm/motorola.c
index 30d34f285024..c5dbb9bdb322 100644
--- a/arch/m68k/mm/motorola.c
+++ b/arch/m68k/mm/motorola.c
@@ -285,7 +285,6 @@ void __init paging_init(void)
 	 * to a couple of allocated pages
 	 */
 	empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
-	memset(empty_zero_page, 0, PAGE_SIZE);
 
 	/*
 	 * Set up SFC/DFC registers
@@ -297,7 +296,7 @@ void __init paging_init(void)
 #endif
 	for (i = 0; i < m68k_num_memory; i++) {
 		zones_size[ZONE_DMA] = m68k_memory[i].size >> PAGE_SHIFT;
-		free_area_init_node(i, pg_data_map + i, zones_size,
+		free_area_init_node(i, zones_size,
 				    m68k_memory[i].addr >> PAGE_SHIFT, NULL);
 	}
 }
diff --git a/arch/m68k/mm/sun3mmu.c b/arch/m68k/mm/sun3mmu.c
index 6a6513aa1ce8..1b902dbd4376 100644
--- a/arch/m68k/mm/sun3mmu.c
+++ b/arch/m68k/mm/sun3mmu.c
@@ -53,7 +53,6 @@ void __init paging_init(void)
 	wp_works_ok = 0;
 #endif
 	empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
-	memset(empty_zero_page, 0, PAGE_SIZE);
 
 	address = PAGE_OFFSET;
 	pg_dir = swapper_pg_dir;
@@ -95,7 +94,7 @@ void __init paging_init(void)
 
 	/* I really wish I knew why the following change made things better...  -- Sam */
 /*	free_area_init(zones_size); */
-	free_area_init_node(0, NODE_DATA(0), zones_size,
+	free_area_init_node(0, zones_size,
 			    (__pa(PAGE_OFFSET) >> PAGE_SHIFT) + 1, NULL);
 
 
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 476e18eca758..be9de2f3dc48 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -41,14 +41,12 @@ static void q40_get_model(char *model);
 static int  q40_get_hardware_list(char *buffer);
 extern void q40_sched_init(irq_handler_t handler);
 
-extern unsigned long q40_gettimeoffset(void);
-extern int q40_hwclk(int, struct rtc_time *);
-extern unsigned int q40_get_ss(void);
-extern int q40_set_clock_mmss(unsigned long);
+static unsigned long q40_gettimeoffset(void);
+static int q40_hwclk(int, struct rtc_time *);
+static unsigned int q40_get_ss(void);
+static int q40_set_clock_mmss(unsigned long);
 static int q40_get_rtc_pll(struct rtc_pll_info *pll);
 static int q40_set_rtc_pll(struct rtc_pll_info *pll);
-extern void q40_reset(void);
-void q40_halt(void);
 extern void q40_waitbut(void);
 void q40_set_vectors(void);
 
@@ -127,7 +125,7 @@ static void q40_heartbeat(int on)
 }
 #endif
 
-void q40_reset(void)
+static void q40_reset(void)
 {
         halted = 1;
         printk("\n\n*******************************************\n"
@@ -137,7 +135,8 @@ void q40_reset(void)
 	while (1)
 		;
 }
-void q40_halt(void)
+
+static void q40_halt(void)
 {
         halted = 1;
         printk("\n\n*******************\n"
@@ -165,7 +164,8 @@ static unsigned int serports[] =
 {
 	0x3f8,0x2f8,0x3e8,0x2e8,0
 };
-void q40_disable_irqs(void)
+
+static void q40_disable_irqs(void)
 {
 	unsigned i, j;
 
@@ -227,7 +227,7 @@ static inline unsigned char bin2bcd(unsigned char b)
 }
 
 
-unsigned long q40_gettimeoffset(void)
+static unsigned long q40_gettimeoffset(void)
 {
 	return 5000 * (ql_ticks != 0);
 }
@@ -248,7 +248,7 @@ unsigned long q40_gettimeoffset(void)
  * };
  */
 
-int q40_hwclk(int op, struct rtc_time *t)
+static int q40_hwclk(int op, struct rtc_time *t)
 {
 	if (op) {
 		/* Write.... */
@@ -285,7 +285,7 @@ int q40_hwclk(int op, struct rtc_time *t)
 	return 0;
 }
 
-unsigned int q40_get_ss(void)
+static unsigned int q40_get_ss(void)
 {
 	return bcd2bin(Q40_RTC_SECS);
 }
@@ -295,7 +295,7 @@ unsigned int q40_get_ss(void)
  * clock is out by > 30 minutes.  Logic lifted from atari code.
  */
 
-int q40_set_clock_mmss(unsigned long nowtime)
+static int q40_set_clock_mmss(unsigned long nowtime)
 {
 	int retval = 0;
 	short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
diff --git a/arch/m68k/sun3/Makefile b/arch/m68k/sun3/Makefile
index be1a8470d636..38ba0e0cedad 100644
--- a/arch/m68k/sun3/Makefile
+++ b/arch/m68k/sun3/Makefile
@@ -2,6 +2,6 @@
 # Makefile for Linux arch/m68k/sun3 source directory
 #
 
-obj-y	:= sun3ints.o sun3dvma.o sbus.o idprom.o
+obj-y	:= sun3ints.o sun3dvma.o idprom.o
 
 obj-$(CONFIG_SUN3) += config.o mmu_emu.o leds.o dvma.o intersil.o
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index c0fbd278fbb1..732087d0735c 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -36,7 +36,7 @@ extern char _text, _end;
 char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
 
 extern unsigned long sun3_gettimeoffset(void);
-extern void sun3_sched_init(irq_handler_t handler);
+static void sun3_sched_init(irq_handler_t handler);
 extern void sun3_get_model (char* model);
 extern void idprom_init (void);
 extern int sun3_hwclk(int set, struct rtc_time *t);
@@ -114,7 +114,8 @@ static void sun3_halt (void)
 
 /* sun3 bootmem allocation */
 
-void __init sun3_bootmem_alloc(unsigned long memory_start, unsigned long memory_end)
+static void __init sun3_bootmem_alloc(unsigned long memory_start,
+				      unsigned long memory_end)
 {
 	unsigned long start_page;
 
@@ -164,7 +165,7 @@ void __init config_sun3(void)
 	sun3_bootmem_alloc(memory_start, memory_end);
 }
 
-void __init sun3_sched_init(irq_handler_t timer_routine)
+static void __init sun3_sched_init(irq_handler_t timer_routine)
 {
 	sun3_disable_interrupts();
         intersil_clock->cmd_reg=(INTERSIL_RUN|INTERSIL_INT_DISABLE|INTERSIL_24H_MODE);
diff --git a/arch/m68k/sun3/dvma.c b/arch/m68k/sun3/dvma.c
index d2b3093f2405..d522eaab4551 100644
--- a/arch/m68k/sun3/dvma.c
+++ b/arch/m68k/sun3/dvma.c
@@ -19,7 +19,7 @@
 
 static unsigned long ptelist[120];
 
-inline unsigned long dvma_page(unsigned long kaddr, unsigned long vaddr)
+static unsigned long dvma_page(unsigned long kaddr, unsigned long vaddr)
 {
 	unsigned long pte;
 	unsigned long j;
diff --git a/arch/m68k/sun3/idprom.c b/arch/m68k/sun3/idprom.c
index dca6ab6a4ede..c86ac37d1983 100644
--- a/arch/m68k/sun3/idprom.c
+++ b/arch/m68k/sun3/idprom.c
@@ -1,4 +1,4 @@
-/* $Id: idprom.c,v 1.22 1996/11/13 05:09:25 davem Exp $
+/*
  * idprom.c: Routines to load the idprom into kernel addresses and
  *           interpret the data contained within.
  *
@@ -25,7 +25,7 @@ static struct idprom idprom_buffer;
  * of the Sparc CPU and have a meaningful IDPROM machtype value that we
  * know about.  See asm-sparc/machines.h for empirical constants.
  */
-struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
+static struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
 /* First, Sun3's */
     { .name = "Sun 3/160 Series",	.id_machtype = (SM_SUN3 | SM_3_160) },
     { .name = "Sun 3/50",		.id_machtype = (SM_SUN3 | SM_3_50) },
diff --git a/arch/m68k/sun3/mmu_emu.c b/arch/m68k/sun3/mmu_emu.c
index fb0f6a20cc3c..60f9d4500d72 100644
--- a/arch/m68k/sun3/mmu_emu.c
+++ b/arch/m68k/sun3/mmu_emu.c
@@ -55,7 +55,7 @@ unsigned char pmeg_ctx[PMEGS_NUM];
 
 /* pointers to the mm structs for each task in each
    context. 0xffffffff is a marker for kernel context */
-struct mm_struct *ctx_alloc[CONTEXTS_NUM] = {
+static struct mm_struct *ctx_alloc[CONTEXTS_NUM] = {
     [0] = (struct mm_struct *)0xffffffff
 };
 
diff --git a/arch/m68k/sun3/prom/Makefile b/arch/m68k/sun3/prom/Makefile
index 6e48ae2a7175..da7eac06bca0 100644
--- a/arch/m68k/sun3/prom/Makefile
+++ b/arch/m68k/sun3/prom/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.5 1995/11/25 00:59:48 davem Exp $
 # Makefile for the Sun Boot PROM interface library under
 # Linux.
 #
diff --git a/arch/m68k/sun3/prom/console.c b/arch/m68k/sun3/prom/console.c
index 52c1427863de..2bcb6e4bfe54 100644
--- a/arch/m68k/sun3/prom/console.c
+++ b/arch/m68k/sun3/prom/console.c
@@ -1,4 +1,4 @@
-/* $Id: console.c,v 1.10 1996/12/18 06:46:54 tridge Exp $
+/*
  * console.c: Routines that deal with sending and receiving IO
  *            to/from the current console device using the PROM.
  *
@@ -104,8 +104,6 @@ prom_query_input_device()
 				return PROMDEV_ITTYB;
 		}
 		return PROMDEV_I_UNK;
-	case PROM_AP1000:
-		return PROMDEV_I_UNK;
 	};
 }
 #endif
@@ -166,8 +164,6 @@ prom_query_output_device()
 			};
 		}
 		break;
-	case PROM_AP1000:
-		return PROMDEV_I_UNK;
 	};
 	return PROMDEV_O_UNK;
 }
diff --git a/arch/m68k/sun3/prom/init.c b/arch/m68k/sun3/prom/init.c
index 202adfcc316e..d8e6349336b4 100644
--- a/arch/m68k/sun3/prom/init.c
+++ b/arch/m68k/sun3/prom/init.c
@@ -1,4 +1,4 @@
-/* $Id: init.c,v 1.9 1996/12/18 06:46:55 tridge Exp $
+/*
  * init.c:  Initialize internal variables used by the PROM
  *          library functions.
  *
@@ -31,11 +31,6 @@ extern void prom_ranges_init(void);
 
 void __init prom_init(struct linux_romvec *rp)
 {
-#ifdef CONFIG_AP1000
-	extern struct linux_romvec *ap_prom_init(void);
-	rp = ap_prom_init();
-#endif
-
 	romvec = rp;
 #ifndef CONFIG_SUN3
 	switch(romvec->pv_romvers) {
@@ -53,10 +48,6 @@ void __init prom_init(struct linux_romvec *rp)
 		prom_printf("PROMLIB: Sun IEEE Prom not supported yet\n");
 		prom_halt();
 		break;
-	case 42: /* why not :-) */
-		prom_vers = PROM_AP1000;
-		break;
-
 	default:
 		prom_printf("PROMLIB: Bad PROM version %d\n",
 			    romvec->pv_romvers);
diff --git a/arch/m68k/sun3/prom/misc.c b/arch/m68k/sun3/prom/misc.c
index b88716f2c68c..3d60e1337f75 100644
--- a/arch/m68k/sun3/prom/misc.c
+++ b/arch/m68k/sun3/prom/misc.c
@@ -1,4 +1,4 @@
-/* $Id: misc.c,v 1.15 1997/05/14 20:45:00 davem Exp $
+/*
  * misc.c:  Miscellaneous prom functions that don't belong
  *          anywhere else.
  *
diff --git a/arch/m68k/sun3/prom/printf.c b/arch/m68k/sun3/prom/printf.c
index e7bfde377b5e..df85018f487a 100644
--- a/arch/m68k/sun3/prom/printf.c
+++ b/arch/m68k/sun3/prom/printf.c
@@ -1,4 +1,4 @@
-/* $Id: printf.c,v 1.5 1996/04/04 16:31:07 tridge Exp $
+/*
  * printf.c:  Internal prom library printf facility.
  *
  * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
@@ -37,10 +37,6 @@ prom_printf(char *fmt, ...)
 
 	bptr = ppbuf;
 
-#ifdef CONFIG_AP1000
-        ap_write(1,bptr,strlen(bptr));
-#else
-
 #ifdef CONFIG_KGDB
 	if (kgdb_initialized) {
 		printk("kgdb_initialized = %d\n", kgdb_initialized);
@@ -54,7 +50,6 @@ prom_printf(char *fmt, ...)
 		prom_putchar(ch);
 	}
 #endif
-#endif
 	va_end(args);
 	return;
 }
diff --git a/arch/m68k/sun3/sbus.c b/arch/m68k/sun3/sbus.c
deleted file mode 100644
index babdbfa3cda7..000000000000
--- a/arch/m68k/sun3/sbus.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * SBus helper functions
- *
- * Sun3 don't have a sbus, but many of the used devices are also
- * used on Sparc machines with sbus. To avoid having a lot of
- * duplicate code, we provide necessary glue stuff to make using
- * of the sbus driver code possible.
- *
- * (C) 1999 Thomas Bogendoerfer (tsbogend@alpha.franken.de)
- */
-
-#include <linux/types.h>
-#include <linux/compiler.h>
-#include <linux/init.h>
-
-int __init sbus_init(void)
-{
-	return 0;
-}
-
-void *sparc_alloc_io (u32 address, void *virtual, int len, char *name,
-                      u32 bus_type, int rdonly)
-{
-	return (void *)address;
-}
-
-subsys_initcall(sbus_init);
diff --git a/arch/m68k/sun3/sun3dvma.c b/arch/m68k/sun3/sun3dvma.c
index 8709677fa025..f9277e8b4159 100644
--- a/arch/m68k/sun3/sun3dvma.c
+++ b/arch/m68k/sun3/sun3dvma.c
@@ -29,7 +29,7 @@ static inline void dvma_unmap_iommu(unsigned long a, int b)
 extern void sun3_dvma_init(void);
 #endif
 
-unsigned long iommu_use[IOMMU_TOTAL_ENTRIES];
+static unsigned long iommu_use[IOMMU_TOTAL_ENTRIES];
 
 #define dvma_index(baddr) ((baddr - DVMA_START) >> DVMA_PAGE_SHIFT)
 
diff --git a/arch/m68k/sun3/sun3ints.c b/arch/m68k/sun3/sun3ints.c
index cf93481adb1d..7364cd67455e 100644
--- a/arch/m68k/sun3/sun3ints.c
+++ b/arch/m68k/sun3/sun3ints.c
@@ -30,7 +30,7 @@ void sun3_enable_interrupts(void)
 	sun3_enable_irq(0);
 }
 
-int led_pattern[8] = {
+static int led_pattern[8] = {
        ~(0x80), ~(0x01),
        ~(0x40), ~(0x02),
        ~(0x20), ~(0x04),
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 8e8441587c22..2e7515e8db98 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -58,10 +58,18 @@ config GENERIC_TIME
 	bool
 	default y
 
+config GENERIC_CMOS_UPDATE
+	bool
+	default y
+
 config TIME_LOW_RES
 	bool
 	default y
 
+config GENERIC_CLOCKEVENTS
+	bool
+	default n
+
 config NO_IOPORT
 	def_bool y
 
@@ -108,11 +116,13 @@ config M5206e
 
 config M520x
 	bool "MCF520x"
+	select GENERIC_CLOCKEVENTS
 	help
 	   Freescale Coldfire 5207/5208 processor support.
 
 config M523x
 	bool "MCF523x"
+	select GENERIC_CLOCKEVENTS
 	help
 	  Freescale Coldfire 5230/1/2/4/5 processor support
 
@@ -138,6 +148,7 @@ config M5275
 
 config M528x
 	bool "MCF528x"
+	select GENERIC_CLOCKEVENTS
 	help
 	  Motorola ColdFire 5280/5282 processor support.
 
@@ -161,6 +172,7 @@ endchoice
 config M527x
 	bool
 	depends on (M5271 || M5275)
+	select GENERIC_CLOCKEVENTS
 	default y
 
 config COLDFIRE
@@ -674,6 +686,9 @@ endchoice
 if COLDFIRE
 source "kernel/Kconfig.preempt"
 endif
+
+source "kernel/time/Kconfig"
+
 source "mm/Kconfig"
 
 endmenu
diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile
index e0b5f62e395c..b63bbcf874ff 100644
--- a/arch/m68knommu/Makefile
+++ b/arch/m68knommu/Makefile
@@ -8,6 +8,8 @@
 # (C) Copyright 2002, Greg Ungerer <gerg@snapgear.com>
 #
 
+KBUILD_DEFCONFIG := m5208evb_defconfig
+
 platform-$(CONFIG_M68328)	:= 68328
 platform-$(CONFIG_M68EZ328)	:= 68EZ328
 platform-$(CONFIG_M68VZ328)	:= 68VZ328
@@ -90,13 +92,14 @@ export PLATFORM BOARD MODEL CPUCLASS
 cflags-$(CONFIG_M5206)		:= -m5200
 cflags-$(CONFIG_M5206e)		:= -m5200
 cflags-$(CONFIG_M520x)		:= -m5307
-cflags-$(CONFIG_M523x)		:= -m5307
+cflags-$(CONFIG_M523x)		:= $(call cc-option,-mcpu=523x,-m5307)
 cflags-$(CONFIG_M5249)		:= -m5200
-cflags-$(CONFIG_M527x)		:= -m5307
+cflags-$(CONFIG_M5271)		:= $(call cc-option,-mcpu=5271,-m5307)
 cflags-$(CONFIG_M5272)		:= -m5307
-cflags-$(CONFIG_M528x)		:= -m5307
+cflags-$(CONFIG_M5275)		:= $(call cc-option,-mcpu=5275,-m5307)
+cflags-$(CONFIG_M528x)		:= $(call cc-option,-m528x,-m5307)
 cflags-$(CONFIG_M5307)		:= -m5307
-cflags-$(CONFIG_M532x)		:= -m5307
+cflags-$(CONFIG_M532x)		:= $(call cc-option,-mcpu=532x,-m5307)
 cflags-$(CONFIG_M5407)		:= -m5200
 cflags-$(CONFIG_M68328)		:= -m68000
 cflags-$(CONFIG_M68EZ328)	:= -m68000
diff --git a/arch/m68knommu/configs/m5208evb_defconfig b/arch/m68knommu/configs/m5208evb_defconfig
new file mode 100644
index 000000000000..6fae33a05e2a
--- /dev/null
+++ b/arch/m68knommu/configs/m5208evb_defconfig
@@ -0,0 +1,610 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+CONFIG_M520x=y
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=166666666
+CONFIG_CLOCK_DIV=2
+
+#
+# Platform
+#
+CONFIG_M5208EVB=y
+CONFIG_FREESCALE=y
+# CONFIG_4KSTACKS is not set
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x40000000
+CONFIG_RAMSIZE=0x2000000
+CONFIG_VECTORBASE=0x40000000
+CONFIG_KERNELBASE=0x40020000
+# CONFIG_RAMAUTOBIT is not set
+# CONFIG_RAM8BIT is not set
+CONFIG_RAM16BIT=y
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=115200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+# CONFIG_SYSFS is not set
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_FULLDEBUG=y
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/configs/m5249evb_defconfig b/arch/m68knommu/configs/m5249evb_defconfig
new file mode 100644
index 000000000000..cc6458333d67
--- /dev/null
+++ b/arch/m68knommu/configs/m5249evb_defconfig
@@ -0,0 +1,497 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+CONFIG_M5249=y
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=140000000
+CONFIG_CLOCK_DIV=2
+
+#
+# Platform
+#
+CONFIG_M5249C3=y
+CONFIG_FREESCALE=y
+CONFIG_4KSTACKS=y
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/configs/m5275evb_defconfig b/arch/m68knommu/configs/m5275evb_defconfig
new file mode 100644
index 000000000000..0d1256f5addb
--- /dev/null
+++ b/arch/m68knommu/configs/m5275evb_defconfig
@@ -0,0 +1,627 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+CONFIG_M5275=y
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_M527x=y
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=150000000
+CONFIG_CLOCK_DIV=2
+
+#
+# Platform
+#
+CONFIG_M5275EVB=y
+CONFIG_FREESCALE=y
+# CONFIG_4KSTACKS is not set
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00000000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_FEC=y
+CONFIG_FEC2=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/configs/m5307c3_defconfig b/arch/m68knommu/configs/m5307c3_defconfig
new file mode 100644
index 000000000000..fe2acdfa4d76
--- /dev/null
+++ b/arch/m68knommu/configs/m5307c3_defconfig
@@ -0,0 +1,580 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+CONFIG_M5307=y
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=90000000
+CONFIG_CLOCK_DIV=2
+# CONFIG_OLDMASK is not set
+
+#
+# Platform
+#
+# CONFIG_ARN5307 is not set
+CONFIG_M5307C3=y
+# CONFIG_eLIA is not set
+# CONFIG_SECUREEDGEMP3 is not set
+# CONFIG_CLEOPATRA is not set
+# CONFIG_NETtel is not set
+CONFIG_FREESCALE=y
+# CONFIG_4KSTACKS is not set
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_COMEMPCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+CONFIG_SLIP=y
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=y
+# CONFIG_SLIP_SMART is not set
+# CONFIG_SLIP_MODE_SLIP6 is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_FULLDEBUG=y
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/configs/m5407c3_defconfig b/arch/m68knommu/configs/m5407c3_defconfig
new file mode 100644
index 000000000000..1118936d20e3
--- /dev/null
+++ b/arch/m68knommu/configs/m5407c3_defconfig
@@ -0,0 +1,641 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc1
+# Wed May  7 10:25:16 2008
+#
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_NO_IOPORT=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+# CONFIG_M5272 is not set
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+CONFIG_M5407=y
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=50000000
+CONFIG_CLOCK_DIV=1
+
+#
+# Platform
+#
+CONFIG_M5407C3=y
+# CONFIG_CLEOPATRA is not set
+CONFIG_FREESCALE=y
+CONFIG_4KSTACKS=y
+CONFIG_HZ=100
+
+#
+# RAM configuration
+#
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00000000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
+
+#
+# ROM configuration
+#
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_VIRT_TO_BUS=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+# CONFIG_COMEMPCI is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_COLDFIRE is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+# CONFIG_BOOTPARAM is not set
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68knommu/kernel/comempci.c b/arch/m68knommu/kernel/comempci.c
index 6ee00effbad2..0a68b5a85f86 100644
--- a/arch/m68knommu/kernel/comempci.c
+++ b/arch/m68knommu/kernel/comempci.c
@@ -375,15 +375,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 
 /*****************************************************************************/
 
-void pcibios_update_resource(struct pci_dev *dev, struct resource *root, struct resource *r, int resource)
-{
-	printk(KERN_WARNING "%s(%d): no support for changing PCI resources...\n",
-		__FILE__, __LINE__);
-}
-
-
-/*****************************************************************************/
-
 /*
  *	Local routines to interrcept the standard I/O and vector handling
  *	code. Don't include this 'till now - initialization code above needs
diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
index 03f4fe6a2fc0..5985f1989021 100644
--- a/arch/m68knommu/kernel/setup.c
+++ b/arch/m68knommu/kernel/setup.c
@@ -22,6 +22,7 @@
 #include <linux/interrupt.h>
 #include <linux/fb.h>
 #include <linux/module.h>
+#include <linux/mm.h>
 #include <linux/console.h>
 #include <linux/errno.h>
 #include <linux/string.h>
diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c
index 0ccfb2ad6380..d182b2f72211 100644
--- a/arch/m68knommu/kernel/time.c
+++ b/arch/m68knommu/kernel/time.c
@@ -33,14 +33,13 @@ static inline int set_rtc_mmss(unsigned long nowtime)
 	return -1;
 }
 
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
  * timer_interrupt() needs to keep up the real-time clock,
  * as well as call the "do_timer()" routine every clocktick
  */
 irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 {
-	/* last time the cmos clock got updated */
-	static long last_rtc_update=0;
 
 	if (current->pid)
 		profile_tick(CPU_PROFILING);
@@ -49,21 +48,6 @@ irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 
 	do_timer(1);
 
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    (xtime.tv_nsec  / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-	  if (set_rtc_mmss(xtime.tv_sec) == 0)
-	    last_rtc_update = xtime.tv_sec;
-	  else
-	    last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
-	}
-
 	write_sequnlock(&xtime_lock);
 
 #ifndef CONFIG_SMP
@@ -71,8 +55,9 @@ irqreturn_t arch_timer_interrupt(int irq, void *dummy)
 #endif
 	return(IRQ_HANDLED);
 }
+#endif
 
-void time_init(void)
+static unsigned long read_rtc_mmss(void)
 {
 	unsigned int year, mon, day, hour, min, sec;
 
@@ -83,10 +68,21 @@ void time_init(void)
 
 	if ((year += 1900) < 1970)
 		year += 100;
-	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
-	xtime.tv_nsec = 0;
-	wall_to_monotonic.tv_sec = -xtime.tv_sec;
 
-	hw_timer_init();
+	return  mktime(year, mon, day, hour, min, sec);;
+}
+
+unsigned long read_persistent_clock(void)
+{
+	return read_rtc_mmss();
 }
 
+int update_persistent_clock(struct timespec now)
+{
+	return set_rtc_mmss(now.tv_sec);
+}
+
+void time_init(void)
+{
+	hw_timer_init();
+}
diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
index ec9aea652e79..46f8f9d0c408 100644
--- a/arch/m68knommu/kernel/traps.c
+++ b/arch/m68knommu/kernel/traps.c
@@ -103,12 +103,28 @@ asmlinkage void buserr_c(struct frame *fp)
 	force_sig(SIGSEGV, current);
 }
 
+static void print_this_address(unsigned long addr, int i)
+{
+#ifdef CONFIG_KALLSYMS
+	printk(KERN_EMERG " [%08lx] ", addr);
+	print_symbol(KERN_CONT "%s\n", addr);
+#else
+	if (i % 5)
+		printk(KERN_CONT " [%08lx] ", addr);
+	else
+		printk(KERN_CONT "\n" KERN_EMERG " [%08lx] ", addr);
+	i++;
+#endif
+}
+
 int kstack_depth_to_print = 48;
 
 static void __show_stack(struct task_struct *task, unsigned long *stack)
 {
 	unsigned long *endstack, addr;
+#ifdef CONFIG_FRAME_POINTER
 	unsigned long *last_stack;
+#endif
 	int i;
 
 	if (!stack)
@@ -126,6 +142,7 @@ static void __show_stack(struct task_struct *task, unsigned long *stack)
 		printk(" %08lx", *(stack + i));
 	}
 	printk("\n");
+	i = 0;
 
 #ifdef CONFIG_FRAME_POINTER
 	printk(KERN_EMERG "Call Trace:\n");
@@ -134,15 +151,30 @@ static void __show_stack(struct task_struct *task, unsigned long *stack)
 	while (stack <= endstack && stack > last_stack) {
 
 		addr = *(stack + 1);
-		printk(KERN_EMERG " [%08lx] ", addr);
-		print_symbol(KERN_CONT "%s\n", addr);
+		print_this_address(addr, i);
+		i++;
 
 		last_stack = stack;
 		stack = (unsigned long *)*stack;
 	}
 	printk("\n");
 #else
-	printk(KERN_EMERG "CONFIG_FRAME_POINTER disabled, no symbolic call trace\n");
+	printk(KERN_EMERG "Call Trace with CONFIG_FRAME_POINTER disabled:\n");
+	while (stack <= endstack) {
+		addr = *stack++;
+		/*
+		 * If the address is either in the text segment of the kernel,
+		 * or in a region which is occupied by a module then it *may*
+		 * be the address of a calling routine; if so, print it so that
+		 * someone tracing down the cause of the crash will be able to
+		 * figure out the call path that was taken.
+		 */
+		if (__kernel_text_address(addr)) {
+			print_this_address(addr, i);
+			i++;
+		}
+	}
+	printk(KERN_CONT "\n");
 #endif
 }
 
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 93e69236ed6f..69ba9b10767a 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -62,6 +62,7 @@ SECTIONS {
 	.text : {
 		_text = .;
 		_stext = . ;
+		HEAD_TEXT
 		TEXT_TEXT
 		SCHED_TEXT
 		LOCK_TEXT
diff --git a/arch/m68knommu/mm/init.c b/arch/m68knommu/mm/init.c
index 22e2a0d02b81..3bf249c53e41 100644
--- a/arch/m68knommu/mm/init.c
+++ b/arch/m68knommu/mm/init.c
@@ -62,33 +62,6 @@ static unsigned long empty_bad_page;
 
 unsigned long empty_zero_page;
 
-void show_mem(void)
-{
-    unsigned long i;
-    int free = 0, total = 0, reserved = 0, shared = 0;
-    int cached = 0;
-
-    printk(KERN_INFO "\nMem-info:\n");
-    show_free_areas();
-    i = max_mapnr;
-    while (i-- > 0) {
-	total++;
-	if (PageReserved(mem_map+i))
-	    reserved++;
-	else if (PageSwapCache(mem_map+i))
-	    cached++;
-	else if (!page_count(mem_map+i))
-	    free++;
-	else
-	    shared += page_count(mem_map+i) - 1;
-    }
-    printk(KERN_INFO "%d pages of RAM\n",total);
-    printk(KERN_INFO "%d free pages\n",free);
-    printk(KERN_INFO "%d reserved pages\n",reserved);
-    printk(KERN_INFO "%d pages shared\n",shared);
-    printk(KERN_INFO "%d pages swap cached\n",cached);
-}
-
 extern unsigned long memory_start;
 extern unsigned long memory_end;
 
diff --git a/arch/m68knommu/platform/coldfire/Makefile b/arch/m68knommu/platform/coldfire/Makefile
index 40cf20be1b90..4f416a91a829 100644
--- a/arch/m68knommu/platform/coldfire/Makefile
+++ b/arch/m68knommu/platform/coldfire/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_COLDFIRE)	+= dma.o entry.o vectors.o
 obj-$(CONFIG_M5206)	+= timers.o
 obj-$(CONFIG_M5206e)	+= timers.o
 obj-$(CONFIG_M520x)	+= pit.o
-obj-$(CONFIG_M523x)	+= pit.o
+obj-$(CONFIG_M523x)	+= pit.o dma_timer.o
 obj-$(CONFIG_M5249)	+= timers.o
 obj-$(CONFIG_M527x)	+= pit.o
 obj-$(CONFIG_M5272)	+= timers.o
diff --git a/arch/m68knommu/platform/coldfire/dma_timer.c b/arch/m68knommu/platform/coldfire/dma_timer.c
new file mode 100644
index 000000000000..772578b1084f
--- /dev/null
+++ b/arch/m68knommu/platform/coldfire/dma_timer.c
@@ -0,0 +1,84 @@
+/*
+ * dma_timer.c -- Freescale ColdFire DMA Timer.
+ *
+ * Copyright (C) 2007, Benedikt Spranger <b.spranger@linutronix.de>
+ * Copyright (C) 2008. Sebastian Siewior, Linutronix
+ *
+ */
+
+#include <linux/clocksource.h>
+#include <linux/io.h>
+
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfpit.h>
+#include <asm/mcfsim.h>
+
+#define DMA_TIMER_0	(0x00)
+#define DMA_TIMER_1	(0x40)
+#define DMA_TIMER_2	(0x80)
+#define DMA_TIMER_3	(0xc0)
+
+#define DTMR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x400)
+#define DTXMR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x402)
+#define DTER0	(MCF_IPSBAR + DMA_TIMER_0 + 0x403)
+#define DTRR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x404)
+#define DTCR0	(MCF_IPSBAR + DMA_TIMER_0 + 0x408)
+#define DTCN0	(MCF_IPSBAR + DMA_TIMER_0 + 0x40c)
+
+#define DMA_FREQ    ((MCF_CLK / 2) / 16)
+
+/* DTMR */
+#define DMA_DTMR_RESTART	(1 << 3)
+#define DMA_DTMR_CLK_DIV_1	(1 << 1)
+#define DMA_DTMR_CLK_DIV_16	(2 << 1)
+#define DMA_DTMR_ENABLE		(1 << 0)
+
+static cycle_t cf_dt_get_cycles(void)
+{
+	return __raw_readl(DTCN0);
+}
+
+static struct clocksource clocksource_cf_dt = {
+	.name		= "coldfire_dma_timer",
+	.rating		= 200,
+	.read		= cf_dt_get_cycles,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.shift		= 20,
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static int __init  init_cf_dt_clocksource(void)
+{
+	/*
+	 * We setup DMA timer 0 in free run mode. This incrementing counter is
+	 * used as a highly precious clock source. With MCF_CLOCK = 150 MHz we
+	 * get a ~213 ns resolution and the 32bit register will overflow almost
+	 * every 15 minutes.
+	 */
+	__raw_writeb(0x00, DTXMR0);
+	__raw_writeb(0x00, DTER0);
+	__raw_writel(0x00000000, DTRR0);
+	__raw_writew(DMA_DTMR_CLK_DIV_16 | DMA_DTMR_ENABLE, DTMR0);
+	clocksource_cf_dt.mult = clocksource_hz2mult(DMA_FREQ,
+						     clocksource_cf_dt.shift);
+	return clocksource_register(&clocksource_cf_dt);
+}
+
+arch_initcall(init_cf_dt_clocksource);
+
+#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
+#define CYC2NS_SCALE	((1000000 << CYC2NS_SCALE_FACTOR) / (DMA_FREQ / 1000))
+
+static unsigned long long cycles2ns(unsigned long cycl)
+{
+	return (unsigned long long) ((unsigned long long)cycl *
+			CYC2NS_SCALE) >> CYC2NS_SCALE_FACTOR;
+}
+
+unsigned long long sched_clock(void)
+{
+	unsigned long cycl = __raw_readl(DTCN0);
+
+	return cycles2ns(cycl);
+}
diff --git a/arch/m68knommu/platform/coldfire/head.S b/arch/m68knommu/platform/coldfire/head.S
index b9aa0ca29bfb..2b0d73c0cc32 100644
--- a/arch/m68knommu/platform/coldfire/head.S
+++ b/arch/m68knommu/platform/coldfire/head.S
@@ -10,6 +10,7 @@
 
 #include <linux/sys.h>
 #include <linux/linkage.h>
+#include <linux/init.h>
 #include <asm/asm-offsets.h>
 #include <asm/coldfire.h>
 #include <asm/mcfcache.h>
@@ -126,7 +127,7 @@ _ramend:
 
 /*****************************************************************************/
 
-.text
+__HEAD
 
 /*
  *	This is the codes first entry point. This is where it all
diff --git a/arch/m68knommu/platform/coldfire/pit.c b/arch/m68knommu/platform/coldfire/pit.c
index 4290638012e0..c5b916700b22 100644
--- a/arch/m68knommu/platform/coldfire/pit.c
+++ b/arch/m68knommu/platform/coldfire/pit.c
@@ -18,7 +18,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 #include <asm/machdep.h>
 #include <asm/io.h>
 #include <asm/coldfire.h>
@@ -33,22 +33,86 @@
 #define	FREQ	((MCF_CLK / 2) / 64)
 #define	TA(a)	(MCF_IPSBAR + MCFPIT_BASE1 + (a))
 #define	INTC0	(MCF_IPSBAR + MCFICM_INTC0)
+#define PIT_CYCLES_PER_JIFFY (FREQ / HZ)
 
-static u32 pit_cycles_per_jiffy;
 static u32 pit_cnt;
 
+/*
+ * Initialize the PIT timer.
+ *
+ * This is also called after resume to bring the PIT into operation again.
+ */
+
+static void init_cf_pit_timer(enum clock_event_mode mode,
+                             struct clock_event_device *evt)
+{
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+
+		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+		__raw_writew(PIT_CYCLES_PER_JIFFY, TA(MCFPIT_PMR));
+		__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
+				MCFPIT_PCSR_OVW | MCFPIT_PCSR_RLD | \
+				MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR));
+		break;
+
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+
+		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+		break;
+
+	case CLOCK_EVT_MODE_ONESHOT:
+
+		__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
+		__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | \
+				MCFPIT_PCSR_OVW | MCFPIT_PCSR_CLK64, \
+				TA(MCFPIT_PCSR));
+		break;
+
+	case CLOCK_EVT_MODE_RESUME:
+		/* Nothing to do here */
+		break;
+	}
+}
+
+/*
+ * Program the next event in oneshot mode
+ *
+ * Delta is given in PIT ticks
+ */
+static int cf_pit_next_event(unsigned long delta,
+		struct clock_event_device *evt)
+{
+	__raw_writew(delta, TA(MCFPIT_PMR));
+	return 0;
+}
+
+struct clock_event_device cf_pit_clockevent = {
+	.name		= "pit",
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.set_mode	= init_cf_pit_timer,
+	.set_next_event	= cf_pit_next_event,
+	.shift		= 32,
+	.irq		= MCFINT_VECBASE + MCFINT_PIT1,
+};
+
+
+
 /***************************************************************************/
 
 static irqreturn_t pit_tick(int irq, void *dummy)
 {
+	struct clock_event_device *evt = &cf_pit_clockevent;
 	u16 pcsr;
 
 	/* Reset the ColdFire timer */
 	pcsr = __raw_readw(TA(MCFPIT_PCSR));
 	__raw_writew(pcsr | MCFPIT_PCSR_PIF, TA(MCFPIT_PCSR));
 
-	pit_cnt += pit_cycles_per_jiffy;
-	return arch_timer_interrupt(irq, dummy);
+	pit_cnt += PIT_CYCLES_PER_JIFFY;
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
 }
 
 /***************************************************************************/
@@ -72,14 +136,14 @@ static cycle_t pit_read_clk(void)
 	cycles = pit_cnt;
 	local_irq_restore(flags);
 
-	return cycles + pit_cycles_per_jiffy - pcntr;
+	return cycles + PIT_CYCLES_PER_JIFFY - pcntr;
 }
 
 /***************************************************************************/
 
 static struct clocksource pit_clk = {
 	.name	= "pit",
-	.rating	= 250,
+	.rating	= 100,
 	.read	= pit_read_clk,
 	.shift	= 20,
 	.mask	= CLOCKSOURCE_MASK(32),
@@ -92,6 +156,14 @@ void hw_timer_init(void)
 {
 	u32 imr;
 
+	cf_pit_clockevent.cpumask = cpumask_of_cpu(smp_processor_id());
+	cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32);
+	cf_pit_clockevent.max_delta_ns =
+		clockevent_delta2ns(0xFFFF, &cf_pit_clockevent);
+	cf_pit_clockevent.min_delta_ns =
+		clockevent_delta2ns(0x3f, &cf_pit_clockevent);
+	clockevents_register_device(&cf_pit_clockevent);
+
 	setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &pit_irq);
 
 	__raw_writeb(ICR_INTRCONF, INTC0 + MCFINTC_ICR0 + MCFINT_PIT1);
@@ -99,13 +171,6 @@ void hw_timer_init(void)
 	imr &= ~MCFPIT_IMR_IBIT;
 	__raw_writel(imr, INTC0 + MCFPIT_IMR);
 
-	/* Set up PIT timer 1 as poll clock */
-	pit_cycles_per_jiffy = FREQ / HZ;
-	__raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR));
-	__raw_writew(pit_cycles_per_jiffy, TA(MCFPIT_PMR));
-	__raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | MCFPIT_PCSR_OVW |
-		MCFPIT_PCSR_RLD | MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR));
-
 	pit_clk.mult = clocksource_hz2mult(FREQ, pit_clk.shift);
 	clocksource_register(&pit_clk);
 }
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 24c5dee91768..4da736e25333 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -3,6 +3,7 @@ config MIPS
 	default y
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select HAVE_ARCH_KGDB
 	# Horrible source of confusion.  Die, die, die ...
 	select EMBEDDED
 	select RTC_LIB
@@ -34,7 +35,6 @@ config BASLER_EXCITE
 	select SYS_HAS_CPU_RM9000
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	help
 	  The eXcite is a smart camera platform manufactured by
 	  Basler Vision Technologies AG.
@@ -181,38 +181,6 @@ config LEMOTE_FULONG
 	  Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
 	  an FPGA northbridge
 
-config MIPS_ATLAS
-	bool "MIPS Atlas board"
-	select BOOT_ELF32
-	select BOOT_RAW
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_NONCOHERENT
-	select SYS_HAS_EARLY_PRINTK
-	select IRQ_CPU
-	select HW_HAS_PCI
-	select MIPS_BOARDS_GEN
-	select MIPS_BONITO64
-	select PCI_GT64XXX_PCI0
-	select MIPS_MSC
-	select RM7000_CPU_SCACHE
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_HAS_CPU_MIPS64_R1
-	select SYS_HAS_CPU_NEVADA
-	select SYS_HAS_CPU_RM7000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL
-	select SYS_SUPPORTS_SMARTMIPS
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-	help
-	  This enables support for the MIPS Technologies Atlas evaluation
-	  board.
-
 config MIPS_MALTA
 	bool "MIPS Malta board"
 	select ARCH_MAY_HAVE_PC_FDC
@@ -249,26 +217,6 @@ config MIPS_MALTA
 	  This enables support for the MIPS Technologies Malta evaluation
 	  board.
 
-config MIPS_SEAD
-	bool "MIPS SEAD board"
-	select CEVT_R4K
-	select CSRC_R4K
-	select IRQ_CPU
-	select DMA_NONCOHERENT
-	select SYS_HAS_EARLY_PRINTK
-	select MIPS_BOARDS_GEN
-	select SYS_HAS_CPU_MIPS32_R1
-	select SYS_HAS_CPU_MIPS32_R2
-	select SYS_HAS_CPU_MIPS64_R1
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_SMARTMIPS
-	help
-	  This enables support for the MIPS Technologies SEAD evaluation
-	  board.
-
 config MIPS_SIM
 	bool 'MIPS simulator (MIPSsim)'
 	select CEVT_R4K
@@ -332,7 +280,6 @@ config PMC_MSP
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	select IRQ_CPU
 	select SERIAL_8250
 	select SERIAL_8250_CONSOLE
@@ -358,7 +305,6 @@ config PMC_YOSEMITE
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_SMP
 	help
 	  Yosemite is an evaluation board for the RM9000x2 processor
@@ -382,6 +328,7 @@ config SGI_IP22
 	select SGI_HAS_DS1286
 	select SGI_HAS_I8042
 	select SGI_HAS_INDYDOG
+	select SGI_HAS_HAL2
 	select SGI_HAS_SEEQ
 	select SGI_HAS_WD93
 	select SGI_HAS_ZILOG
@@ -410,7 +357,6 @@ config SGI_IP27
 	select SYS_HAS_CPU_R10000
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_SMP
 	select GENERIC_HARDIRQS_NO__DO_IRQ
@@ -437,6 +383,7 @@ config SGI_IP28
 	select SGI_HAS_DS1286
 	select SGI_HAS_I8042
 	select SGI_HAS_INDYDOG
+	select SGI_HAS_HAL2
 	select SGI_HAS_SEEQ
 	select SGI_HAS_WD93
 	select SGI_HAS_ZILOG
@@ -525,7 +472,6 @@ config SIBYTE_SWARM
 	select SYS_HAS_CPU_SB1
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select SYS_SUPPORTS_KGDB
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select ZONE_DMA32 if 64BIT
 
@@ -602,65 +548,29 @@ config SNI_RM
 	  Technology and now in turn merged with Fujitsu.  Say Y here to
 	  support this machine type.
 
-config TOSHIBA_JMR3927
-	bool "Toshiba JMR-TX3927 board"
-	select CEVT_TXX9
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select MIPS_TX3927
-	select IRQ_TXX9
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX39XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-	select GPIO_TXX9
+config MACH_TX39XX
+	bool "Toshiba TX39 series based machines"
 
-config TOSHIBA_RBTX4927
-	bool "Toshiba RBTX49[23]7 board"
-	select CEVT_R4K
-	select CSRC_R4K
-	select CEVT_TXX9
-	select DMA_NONCOHERENT
-	select HAS_TXX9_SERIAL
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select IRQ_TXX9
-	select I8259 if TOSHIBA_FPCIB0
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX49XX
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-	help
-	  This Toshiba board is based on the TX4927 processor. Say Y here to
-	  support this machine type
+config MACH_TX49XX
+	bool "Toshiba TX49 series based machines"
 
-config TOSHIBA_RBTX4938
-	bool "Toshiba RBTX4938 board"
+config MIKROTIK_RB532
+	bool "Mikrotik RB532 boards"
 	select CEVT_R4K
 	select CSRC_R4K
-	select CEVT_TXX9
 	select DMA_NONCOHERENT
-	select HAS_TXX9_SERIAL
+	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select HW_HAS_PCI
 	select IRQ_CPU
-	select IRQ_TXX9
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_TX49XX
+	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-	select GPIO_TXX9
+	select SWAP_IO_SPACE
+	select BOOT_RAW
+	select GENERIC_GPIO
 	help
-	  This Toshiba board is based on the TX4938 processor. Say Y here to
-	  support this machine type
+	  Support the Mikrotik(tm) RouterBoard 532 series,
+	  based on the IDT RC32434 SoC.
 
 config WR_PPMC
 	bool "Wind River PPMC board"
@@ -694,8 +604,7 @@ source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
-source "arch/mips/tx4927/Kconfig"
-source "arch/mips/tx4938/Kconfig"
+source "arch/mips/txx9/Kconfig"
 source "arch/mips/vr41xx/Kconfig"
 
 endmenu
@@ -800,7 +709,7 @@ config CSRC_SB1250
 
 config GPIO_TXX9
 	select GENERIC_GPIO
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
 	bool
 
 config CFE
@@ -939,10 +848,6 @@ config PCI_GT64XXX_PCI0
 config NO_EXCEPT_FILL
 	bool
 
-config MIPS_TX3927
-	bool
-	select HAS_TXX9_SERIAL
-
 config MIPS_RM9122
 	bool
 	select SERIAL_RM9000
@@ -959,7 +864,6 @@ config SOC_PNX8550
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select GENERIC_HARDIRQS_NO__DO_IRQ
-	select SYS_SUPPORTS_KGDB
 	select GENERIC_GPIO
 
 config SWAP_IO_SPACE
@@ -979,6 +883,9 @@ config SGI_HAS_DS1286
 config SGI_HAS_INDYDOG
 	bool
 
+config SGI_HAS_HAL2
+	bool
+
 config SGI_HAS_SEEQ
 	bool
 
@@ -1005,7 +912,7 @@ config BOOT_ELF32
 
 config MIPS_L1_CACHE_SHIFT
 	int
-	default "4" if MACH_DECSTATION
+	default "4" if MACH_DECSTATION || MIKROTIK_RB532
 	default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM
 	default "4" if PMC_MSP4200_EVAL
 	default "5"
@@ -1763,6 +1670,7 @@ config SMP
 	bool "Multi-Processing support"
 	depends on SYS_SUPPORTS_SMP
 	select IRQ_PER_CPU
+	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -2064,10 +1972,6 @@ source "fs/Kconfig.binfmt"
 config TRAD_SIGNALS
 	bool
 
-config BINFMT_IRIX
-	bool "Include IRIX binary compatibility"
-	depends on CPU_BIG_ENDIAN && 32BIT && BROKEN
-
 config MIPS32_COMPAT
 	bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
 	depends on 64BIT
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index f18cf92650e3..765c8e287d2b 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -34,28 +34,6 @@ config SMTC_IDLE_HOOK_DEBUG
 	  arch/mips/kernel/smtc.c.  This debugging option result in significant
 	  overhead so should be disabled in production kernels.
 
-config KGDB
-	bool "Remote GDB kernel debugging"
-	depends on DEBUG_KERNEL && SYS_SUPPORTS_KGDB
-	select DEBUG_INFO
-	help
-	  If you say Y here, it will be possible to remotely debug the MIPS
-	  kernel using gdb. This enlarges your kernel image disk size by
-	  several megabytes and requires a machine with more than 16 MB,
-	  better 32 MB RAM to avoid excessive linking time. This is only
-	  useful for kernel hackers. If unsure, say N.
-
-config SYS_SUPPORTS_KGDB
-	bool
-
-config GDB_CONSOLE
-	bool "Console output to GDB"
-	depends on KGDB
-	help
-	  If you are using GDB for remote debugging over a serial port and
-	  would like kernel messages to be formatted into GDB $O packets so
-	  that GDB prints them as program output, say 'Y'.
-
 config SB1XXX_CORELIS
 	bool "Corelis Debugger"
 	depends on SIBYTE_SB1xxx_SOC
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index ad36c946ff96..9aab51caf16a 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -14,7 +14,7 @@
 
 KBUILD_DEFCONFIG := ip22_defconfig
 
-cflags-y :=
+cflags-y := -ffunction-sections
 
 #
 # Select the object file format to substitute into the linker script.
@@ -305,36 +305,14 @@ load-$(CONFIG_LEMOTE_FULONG) +=0xffffffff80100000
 cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote
 
 #
-# For all MIPS, Inc. eval boards
-#
-core-$(CONFIG_MIPS_BOARDS_GEN)	+= arch/mips/mips-boards/generic/
-
-#
-# MIPS Atlas board
-#
-core-$(CONFIG_MIPS_ATLAS)	+= arch/mips/mips-boards/atlas/
-cflags-$(CONFIG_MIPS_ATLAS)	+= -Iinclude/asm-mips/mach-atlas
-cflags-$(CONFIG_MIPS_ATLAS)	+= -Iinclude/asm-mips/mach-mips
-load-$(CONFIG_MIPS_ATLAS)	+= 0xffffffff80100000
-all-$(CONFIG_MIPS_ATLAS)	:= vmlinux.bin
-
-#
 # MIPS Malta board
 #
-core-$(CONFIG_MIPS_MALTA)	+= arch/mips/mips-boards/malta/
-cflags-$(CONFIG_MIPS_MALTA)	+= -Iinclude/asm-mips/mach-mips
+core-$(CONFIG_MIPS_MALTA)	+= arch/mips/mti-malta/
+cflags-$(CONFIG_MIPS_MALTA)	+= -Iinclude/asm-mips/mach-malta
 load-$(CONFIG_MIPS_MALTA)	+= 0xffffffff80100000
 all-$(CONFIG_MIPS_MALTA)	:= vmlinux.bin
 
 #
-# MIPS SEAD board
-#
-core-$(CONFIG_MIPS_SEAD)	+= arch/mips/mips-boards/sead/
-cflags-$(CONFIG_MIPS_SEAD)	+= -Iinclude/asm-mips/mach-mips
-load-$(CONFIG_MIPS_SEAD)	+= 0xffffffff80100000
-all-$(CONFIG_MIPS_SEAD)		:= vmlinux.srec
-
-#
 # MIPS SIM
 #
 core-$(CONFIG_MIPS_SIM)		+= arch/mips/mipssim/
@@ -377,12 +355,6 @@ core-$(CONFIG_MACH_VR41XX)	+= arch/mips/vr41xx/common/
 cflags-$(CONFIG_MACH_VR41XX)	+= -Iinclude/asm-mips/mach-vr41xx
 
 #
-# NEC VR4133
-#
-core-$(CONFIG_NEC_CMBVR4133)	+= arch/mips/vr41xx/nec-cmbvr4133/
-load-$(CONFIG_NEC_CMBVR4133)	+= 0xffffffff80100000
-
-#
 # ZAO Networks Capcella (VR4131)
 #
 load-$(CONFIG_ZAO_CAPCELLA)	+= 0xffffffff80000000
@@ -573,29 +545,37 @@ endif
 all-$(CONFIG_SNI_RM)		:= vmlinux.ecoff
 
 #
+# Common TXx9
+#
+core-$(CONFIG_MACH_TX39XX)	+= arch/mips/txx9/generic/
+cflags-$(CONFIG_MACH_TX39XX) += -Iinclude/asm-mips/mach-tx39xx
+load-$(CONFIG_MACH_TX39XX)	+= 0xffffffff80050000
+core-$(CONFIG_MACH_TX49XX)	+= arch/mips/txx9/generic/
+cflags-$(CONFIG_MACH_TX49XX) += -Iinclude/asm-mips/mach-tx49xx
+load-$(CONFIG_MACH_TX49XX)	+= 0xffffffff80100000
+
+#
 # Toshiba JMR-TX3927 board
 #
-core-$(CONFIG_TOSHIBA_JMR3927)	+= arch/mips/jmr3927/rbhma3100/ \
-				   arch/mips/jmr3927/common/
-cflags-$(CONFIG_TOSHIBA_JMR3927) += -Iinclude/asm-mips/mach-jmr3927
-load-$(CONFIG_TOSHIBA_JMR3927)	+= 0xffffffff80050000
+core-$(CONFIG_TOSHIBA_JMR3927)	+= arch/mips/txx9/jmr3927/
+
+#
+# Routerboard 532 board
+#
+core-$(CONFIG_MIKROTIK_RB532)	+= arch/mips/rb532/
+cflags-$(CONFIG_MIKROTIK_RB532) += -Iinclude/asm-mips/mach-rc32434
+load-$(CONFIG_MIKROTIK_RB532)	+= 0xffffffff80101000
 
 #
 # Toshiba RBTX4927 board or
 # Toshiba RBTX4937 board
 #
-core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/toshiba_rbtx4927/
-core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/common/
-cflags-$(CONFIG_TOSHIBA_RBTX4927) += -Iinclude/asm-mips/mach-tx49xx
-load-$(CONFIG_TOSHIBA_RBTX4927)	+= 0xffffffff80020000
+core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/txx9/rbtx4927/
 
 #
 # Toshiba RBTX4938 board
 #
-core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/
-core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/
-cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx
-load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
+core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/
 
 cflags-y			+= -Iinclude/asm-mips/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
diff --git a/arch/mips/au1000/Kconfig b/arch/mips/au1000/Kconfig
index 1fe97cccead1..e4a057d80ab6 100644
--- a/arch/mips/au1000/Kconfig
+++ b/arch/mips/au1000/Kconfig
@@ -134,4 +134,3 @@ config SOC_AU1X00
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_APM_EMULATION
-	select SYS_SUPPORTS_KGDB
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile
index dd0e19dacfcf..df48fd65bbf3 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/au1000/common/Makefile
@@ -9,7 +9,6 @@ obj-y += prom.o irq.o puts.o time.o reset.o \
 	au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
 	sleeper.o cputable.o dma.o dbdma.o gpio.o
 
-obj-$(CONFIG_KGDB)		+= dbg_io.o
 obj-$(CONFIG_PCI)		+= pci.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c
deleted file mode 100644
index af5be7df2f2a..000000000000
--- a/arch/mips/au1000/common/dbg_io.c
+++ /dev/null
@@ -1,109 +0,0 @@
-#include <linux/types.h>
-
-#include <asm/mach-au1x00/au1000.h>
-
-#ifdef CONFIG_KGDB
-
-/*
- * FIXME the user should be able to select the
- * uart to be used for debugging.
- */
-#define DEBUG_BASE  UART_DEBUG_BASE
-
-#define         UART16550_BAUD_2400             2400
-#define         UART16550_BAUD_4800             4800
-#define         UART16550_BAUD_9600             9600
-#define         UART16550_BAUD_19200            19200
-#define         UART16550_BAUD_38400            38400
-#define         UART16550_BAUD_57600            57600
-#define         UART16550_BAUD_115200           115200
-
-#define         UART16550_PARITY_NONE           0
-#define         UART16550_PARITY_ODD            0x08
-#define         UART16550_PARITY_EVEN           0x18
-#define         UART16550_PARITY_MARK           0x28
-#define         UART16550_PARITY_SPACE          0x38
-
-#define         UART16550_DATA_5BIT             0x0
-#define         UART16550_DATA_6BIT             0x1
-#define         UART16550_DATA_7BIT             0x2
-#define         UART16550_DATA_8BIT             0x3
-
-#define         UART16550_STOP_1BIT             0x0
-#define         UART16550_STOP_2BIT             0x4
-
-
-#define UART_RX		0	/* Receive buffer */
-#define UART_TX		4	/* Transmit buffer */
-#define UART_IER	8	/* Interrupt Enable Register */
-#define UART_IIR	0xC	/* Interrupt ID Register */
-#define UART_FCR	0x10	/* FIFO Control Register */
-#define UART_LCR	0x14	/* Line Control Register */
-#define UART_MCR	0x18	/* Modem Control Register */
-#define UART_LSR	0x1C	/* Line Status Register */
-#define UART_MSR	0x20	/* Modem Status Register */
-#define UART_CLK	0x28	/* Baud Rat4e Clock Divider */
-#define UART_MOD_CNTRL	0x100	/* Module Control */
-
-/* memory-mapped read/write of the port */
-#define UART16550_READ(y)     (au_readl(DEBUG_BASE + y) & 0xff)
-#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y))
-
-extern unsigned long calc_clock(void);
-
-void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
-{
-	if (UART16550_READ(UART_MOD_CNTRL) != 0x3)
-		UART16550_WRITE(UART_MOD_CNTRL, 3);
-	calc_clock();
-
-	/* disable interrupts */
-	UART16550_WRITE(UART_IER, 0);
-
-	/* set up baud rate */
-	{
-		u32 divisor;
-
-		/* set divisor */
-		divisor = get_au1x00_uart_baud_base() / baud;
-		UART16550_WRITE(UART_CLK, divisor & 0xffff);
-	}
-
-	/* set data format */
-	UART16550_WRITE(UART_LCR, (data | parity | stop));
-}
-
-static int remoteDebugInitialized;
-
-u8 getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_115200,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE,
-			  UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(UART_LSR) & 0x1) == 0);
-	return UART16550_READ(UART_RX);
-}
-
-
-int putDebugChar(u8 byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(UART16550_BAUD_115200,
-			  UART16550_DATA_8BIT,
-			  UART16550_PARITY_NONE,
-			  UART16550_STOP_1BIT);
-	}
-
-	while ((UART16550_READ(UART_LSR) & 0x40) == 0);
-	UART16550_WRITE(UART_TX, byte);
-
-	return 1;
-}
-
-#endif
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 74d6d4a593be..dc8a67efac28 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -11,6 +11,7 @@
  * warranty of any kind, whether express or implied.
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 #include <linux/init.h>
@@ -77,14 +78,14 @@ static struct resource au1xxx_usb_ohci_resources[] = {
 };
 
 /* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32)0;
+static u64 ohci_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1xxx_usb_ohci_device = {
 	.name		= "au1xxx-ohci",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &ohci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(au1xxx_usb_ohci_resources),
 	.resource	= au1xxx_usb_ohci_resources,
@@ -106,14 +107,14 @@ static struct resource au1100_lcd_resources[] = {
 	}
 };
 
-static u64 au1100_lcd_dmamask = ~(u32)0;
+static u64 au1100_lcd_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1100_lcd_device = {
 	.name           = "au1100-lcd",
 	.id             = 0,
 	.dev = {
 		.dma_mask               = &au1100_lcd_dmamask,
-		.coherent_dma_mask      = 0xffffffff,
+		.coherent_dma_mask      = DMA_32BIT_MASK,
 	},
 	.num_resources  = ARRAY_SIZE(au1100_lcd_resources),
 	.resource       = au1100_lcd_resources,
@@ -135,14 +136,14 @@ static struct resource au1xxx_usb_ehci_resources[] = {
 	},
 };
 
-static u64 ehci_dmamask = ~(u32)0;
+static u64 ehci_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1xxx_usb_ehci_device = {
 	.name		= "au1xxx-ehci",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &ehci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(au1xxx_usb_ehci_resources),
 	.resource	= au1xxx_usb_ehci_resources,
@@ -180,14 +181,14 @@ static struct resource au1xxx_mmc_resources[] = {
 	}
 };
 
-static u64 udc_dmamask = ~(u32)0;
+static u64 udc_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1xxx_usb_gdt_device = {
 	.name		= "au1xxx-udc",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &udc_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(au1xxx_usb_gdt_resources),
 	.resource	= au1xxx_usb_gdt_resources,
@@ -207,14 +208,14 @@ static struct resource au1xxx_usb_otg_resources[] = {
 	},
 };
 
-static u64 uoc_dmamask = ~(u32)0;
+static u64 uoc_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1xxx_usb_otg_device = {
 	.name		= "au1xxx-uoc",
 	.id		= 0,
 	.dev = {
 		.dma_mask		= &uoc_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(au1xxx_usb_otg_resources),
 	.resource	= au1xxx_usb_otg_resources,
@@ -233,27 +234,27 @@ static struct resource au1200_lcd_resources[] = {
 	}
 };
 
-static u64 au1200_lcd_dmamask = ~(u32)0;
+static u64 au1200_lcd_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device au1200_lcd_device = {
 	.name           = "au1200-lcd",
 	.id             = 0,
 	.dev = {
 		.dma_mask               = &au1200_lcd_dmamask,
-		.coherent_dma_mask      = 0xffffffff,
+		.coherent_dma_mask      = DMA_32BIT_MASK,
 	},
 	.num_resources  = ARRAY_SIZE(au1200_lcd_resources),
 	.resource       = au1200_lcd_resources,
 };
 
-static u64 au1xxx_mmc_dmamask =  ~(u32)0;
+static u64 au1xxx_mmc_dmamask =  DMA_32BIT_MASK;
 
 static struct platform_device au1xxx_mmc_device = {
 	.name = "au1xxx-mmc",
 	.id = 0,
 	.dev = {
 		.dma_mask               = &au1xxx_mmc_dmamask,
-		.coherent_dma_mask      = 0xffffffff,
+		.coherent_dma_mask      = DMA_32BIT_MASK,
 	},
 	.num_resources  = ARRAY_SIZE(au1xxx_mmc_resources),
 	.resource       = au1xxx_mmc_resources,
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index 2166b9e1e80c..bd854a6d1d89 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -31,7 +31,6 @@
 
 #include <linux/init.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/sysctl.h>
 #include <linux/jiffies.h>
 
diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c
index 5ebe0de5e459..847413514964 100644
--- a/arch/mips/au1000/db1x00/init.c
+++ b/arch/mips/au1000/db1x00/init.c
@@ -57,6 +57,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c
index 33a4aebe0cba..3bae13c28954 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -55,6 +55,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/au1000/mtx-1/platform.c
index 9807be37c32f..8b5914d1241f 100644
--- a/arch/mips/au1000/mtx-1/platform.c
+++ b/arch/mips/au1000/mtx-1/platform.c
@@ -24,6 +24,9 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <mtd/mtd-abi.h>
 
 static struct gpio_keys_button mtx1_gpio_button[] = {
 	{
@@ -85,10 +88,56 @@ static struct platform_device mtx1_gpio_leds = {
 	}
 };
 
+static struct mtd_partition mtx1_mtd_partitions[] = {
+	{
+		.name	= "filesystem",
+		.size	= 0x01C00000,
+		.offset	= 0,
+	},
+	{
+		.name	= "yamon",
+		.size	= 0x00100000,
+		.offset	= MTDPART_OFS_APPEND,
+		.mask_flags = MTD_WRITEABLE,
+	},
+	{
+		.name	= "kernel",
+		.size	= 0x002c0000,
+		.offset	= MTDPART_OFS_APPEND,
+	},
+	{
+		.name	= "yamon env",
+		.size	= 0x00040000,
+		.offset	= MTDPART_OFS_APPEND,
+	},
+};
+
+static struct physmap_flash_data mtx1_flash_data = {
+	.width		= 4,
+	.nr_parts	= 4,
+	.parts		= mtx1_mtd_partitions,
+};
+
+static struct resource mtx1_mtd_resource = {
+	.start	= 0x1e000000,
+	.end	= 0x1fffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device mtx1_mtd = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &mtx1_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &mtx1_mtd_resource,
+};
+
 static struct __initdata platform_device * mtx1_devs[] = {
 	&mtx1_gpio_leds,
 	&mtx1_wdt,
-	&mtx1_button
+	&mtx1_button,
+	&mtx1_mtd,
 };
 
 static int __init mtx1_register_devices(void)
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c
index 3837365d613d..8a9c7d57208d 100644
--- a/arch/mips/au1000/pb1000/init.c
+++ b/arch/mips/au1000/pb1000/init.c
@@ -52,6 +52,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c
index 8355483f3de2..7c6792308bc5 100644
--- a/arch/mips/au1000/pb1100/init.c
+++ b/arch/mips/au1000/pb1100/init.c
@@ -54,7 +54,7 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c
index 09fd63b86062..e9b2a0fd48ae 100644
--- a/arch/mips/au1000/pb1200/init.c
+++ b/arch/mips/au1000/pb1200/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x08000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1200/platform.c b/arch/mips/au1000/pb1200/platform.c
index 5930110b9b6d..f8fb0aeac571 100644
--- a/arch/mips/au1000/pb1200/platform.c
+++ b/arch/mips/au1000/pb1200/platform.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
@@ -36,14 +37,14 @@ static struct resource ide_resources[] = {
 	}
 };
 
-static u64 ide_dmamask = ~(u32)0;
+static u64 ide_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device ide_device = {
 	.name		= "au1200-ide",
 	.id		= 0,
 	.dev = {
 		.dma_mask 		= &ide_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(ide_resources),
 	.resource	= ide_resources
diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/au1000/pb1500/init.c
index 49f51e165863..3b6e395cf952 100644
--- a/arch/mips/au1000/pb1500/init.c
+++ b/arch/mips/au1000/pb1500/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c
index 1b5f58434bb7..e1055a13a1a0 100644
--- a/arch/mips/au1000/pb1550/init.c
+++ b/arch/mips/au1000/pb1550/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x08000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c
index b849bf501c04..7516434760a1 100644
--- a/arch/mips/au1000/xxs1500/init.c
+++ b/arch/mips/au1000/xxs1500/init.c
@@ -53,6 +53,6 @@ void __init prom_init(void)
 	if (!memsize_str)
 		memsize = 0x04000000;
 	else
-		memsize = strict_strtol(memsize_str, 0, NULL);
+		strict_strtol(memsize_str, 0, &memsize);
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
 }
diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile
index 519142c2e4ef..cff29cf46d03 100644
--- a/arch/mips/basler/excite/Makefile
+++ b/arch/mips/basler/excite/Makefile
@@ -5,5 +5,4 @@
 obj-$(CONFIG_BASLER_EXCITE)	+= excite_irq.o excite_prom.o excite_setup.o \
 				   excite_device.o excite_procfs.o
 
-obj-$(CONFIG_KGDB)		+= excite_dbg_io.o
 obj-m				+= excite_iodev.o
diff --git a/arch/mips/basler/excite/excite_dbg_io.c b/arch/mips/basler/excite/excite_dbg_io.c
deleted file mode 100644
index d289e3a868cf..000000000000
--- a/arch/mips/basler/excite/excite_dbg_io.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- *  Copyright (C) 2004 by Basler Vision Technologies AG
- *  Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/gdb-stub.h>
-#include <asm/rm9k-ocd.h>
-#include <excite.h>
-
-#if defined(CONFIG_SERIAL_8250) && CONFIG_SERIAL_8250_NR_UARTS > 1
-#error Debug port used by serial driver
-#endif
-
-#define UART_CLK		25000000
-#define BASE_BAUD		(UART_CLK / 16)
-#define REGISTER_BASE_0		0x0208UL
-#define REGISTER_BASE_1		0x0238UL
-
-#define REGISTER_BASE_DBG	REGISTER_BASE_1
-
-#define CPRR	0x0004
-#define UACFG	0x0200
-#define UAINTS	0x0204
-#define UARBR	(REGISTER_BASE_DBG + 0x0000)
-#define UATHR	(REGISTER_BASE_DBG + 0x0004)
-#define UADLL	(REGISTER_BASE_DBG + 0x0008)
-#define UAIER	(REGISTER_BASE_DBG + 0x000c)
-#define UADLH	(REGISTER_BASE_DBG + 0x0010)
-#define UAIIR	(REGISTER_BASE_DBG + 0x0014)
-#define UAFCR	(REGISTER_BASE_DBG + 0x0018)
-#define UALCR	(REGISTER_BASE_DBG + 0x001c)
-#define UAMCR	(REGISTER_BASE_DBG + 0x0020)
-#define UALSR	(REGISTER_BASE_DBG + 0x0024)
-#define UAMSR	(REGISTER_BASE_DBG + 0x0028)
-#define UASCR	(REGISTER_BASE_DBG + 0x002c)
-
-#define	PARITY_NONE	0
-#define	PARITY_ODD	0x08
-#define	PARITY_EVEN	0x18
-#define	PARITY_MARK	0x28
-#define	PARITY_SPACE	0x38
-
-#define	DATA_5BIT	0x0
-#define	DATA_6BIT	0x1
-#define	DATA_7BIT	0x2
-#define	DATA_8BIT	0x3
-
-#define	STOP_1BIT	0x0
-#define	STOP_2BIT	0x4
-
-#define BAUD_DBG	57600
-#define	PARITY_DBG	PARITY_NONE
-#define	DATA_DBG	DATA_8BIT
-#define	STOP_DBG	STOP_1BIT
-
-/* Initialize the serial port for KGDB debugging */
-void __init excite_kgdb_init(void)
-{
-	const u32 divisor = BASE_BAUD / BAUD_DBG;
-
-	/* Take the UART out of reset */
-	titan_writel(0x00ff1cff, CPRR);
-	titan_writel(0x00000000, UACFG);
-	titan_writel(0x00000002, UACFG);
-
-	titan_writel(0x0, UALCR);
-	titan_writel(0x0, UAIER);
-
-	/* Disable FIFOs */
-	titan_writel(0x00, UAFCR);
-
-	titan_writel(0x80, UALCR);
-	titan_writel(divisor & 0xff, UADLL);
-	titan_writel((divisor & 0xff00) >> 8, UADLH);
-	titan_writel(0x0, UALCR);
-
-	titan_writel(DATA_DBG | PARITY_DBG | STOP_DBG, UALCR);
-
-	/* Enable receiver interrupt */
-	titan_readl(UARBR);
-	titan_writel(0x1, UAIER);
-}
-
-int getDebugChar(void)
-{
-	while (!(titan_readl(UALSR) & 0x1));
-	return titan_readl(UARBR);
-}
-
-int putDebugChar(int data)
-{
-	while (!(titan_readl(UALSR) & 0x20));
-	titan_writel(data, UATHR);
-	return 1;
-}
-
-/* KGDB interrupt handler */
-asmlinkage void excite_kgdb_inthdl(void)
-{
-	if (unlikely(
-		((titan_readl(UAIIR) & 0x7) == 4)
-		&& ((titan_readl(UARBR) & 0xff) == 0x3)))
-			set_async_breakpoint(&regs->cp0_epc);
-}
diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c
index 4903e067916b..934e0a6b1011 100644
--- a/arch/mips/basler/excite/excite_irq.c
+++ b/arch/mips/basler/excite/excite_irq.c
@@ -50,10 +50,6 @@ void __init arch_init_irq(void)
 	mips_cpu_irq_init();
 	rm7k_cpu_irq_init();
 	rm9k_cpu_irq_init();
-
-#ifdef CONFIG_KGDB
-	excite_kgdb_init();
-#endif
 }
 
 asmlinkage void plat_irq_dispatch(void)
@@ -90,9 +86,6 @@ asmlinkage void plat_irq_dispatch(void)
 	msgint	    = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20));
 	if ((pending & (1 << TITAN_IRQ)) && msgint) {
 		ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10));
-#if defined(CONFIG_KGDB)
-		excite_kgdb_inthdl();
-#endif
 		do_IRQ(TITAN_IRQ);
 		return;
 	}
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
index 6dd8f0d46d09..d66b3b8edf2a 100644
--- a/arch/mips/basler/excite/excite_setup.c
+++ b/arch/mips/basler/excite/excite_setup.c
@@ -95,13 +95,13 @@ static int __init excite_init_console(void)
 	/* Take the DUART out of reset */
 	titan_writel(0x00ff1cff, CPRR);
 
-#if defined(CONFIG_KGDB) || (CONFIG_SERIAL_8250_NR_UARTS > 1)
+#if (CONFIG_SERIAL_8250_NR_UARTS > 1)
 	/* Enable both ports */
 	titan_writel(MASK_SER0 | MASK_SER1, UACFG);
 #else
 	/* Enable port #0 only */
 	titan_writel(MASK_SER0, UACFG);
-#endif	/* defined(CONFIG_KGDB) */
+#endif
 
  	/*
 	 * Set up serial port #0. Do not use autodetection; the result is
diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile
index d73833b7c781..237926288d6d 100644
--- a/arch/mips/cobalt/Makefile
+++ b/arch/mips/cobalt/Makefile
@@ -2,7 +2,7 @@
 # Makefile for the Cobalt micro systems family specific parts of the kernel
 #
 
-obj-y := buttons.o irq.o led.o reset.o rtc.o serial.o setup.o time.o
+obj-y := buttons.o irq.o lcd.o led.o reset.o rtc.o serial.o setup.o time.o
 
 obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_EARLY_PRINTK)	+= console.o
diff --git a/arch/mips/cobalt/lcd.c b/arch/mips/cobalt/lcd.c
new file mode 100644
index 000000000000..0720e4fae311
--- /dev/null
+++ b/arch/mips/cobalt/lcd.c
@@ -0,0 +1,55 @@
+/*
+ *  Registration of Cobalt LCD platform device.
+ *
+ *  Copyright (C) 2008  Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+static struct resource cobalt_lcd_resource __initdata = {
+	.start	= 0x1f000000,
+	.end	= 0x1f00001f,
+	.flags	= IORESOURCE_MEM,
+};
+
+static __init int cobalt_lcd_add(void)
+{
+	struct platform_device *pdev;
+	int retval;
+
+	pdev = platform_device_alloc("cobalt-lcd", -1);
+	if (!pdev)
+		return -ENOMEM;
+
+	retval = platform_device_add_resources(pdev, &cobalt_lcd_resource, 1);
+	if (retval)
+		goto err_free_device;
+
+	retval = platform_device_add(pdev);
+	if (retval)
+		goto err_free_device;
+
+	return 0;
+
+err_free_device:
+	platform_device_put(pdev);
+
+	return retval;
+}
+device_initcall(cobalt_lcd_add);
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index dd23beb8604f..b51644227241 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -81,8 +81,8 @@ void __init plat_mem_setup(void)
 
 	set_io_port_base(CKSEG1ADDR(GT_DEF_PCI0_IO_BASE));
 
-	/* I/O port resource must include LCD/buttons */
-	ioport_resource.end = 0x0fffffff;
+	/* I/O port resource */
+	ioport_resource.end = 0x01ffffff;
 
 	/* These resources have been reserved by VIA SuperI/O chip. */
 	for (i = 0; i < ARRAY_SIZE(cobalt_reserved_resources); i++)
diff --git a/arch/mips/configs/atlas_defconfig b/arch/mips/configs/atlas_defconfig
deleted file mode 100644
index 3443f6cd57bb..000000000000
--- a/arch/mips/configs/atlas_defconfig
+++ /dev/null
@@ -1,1472 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Sun Feb 18 21:27:35 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-CONFIG_MIPS_ATLAS=y
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_MIPS_BONITO64=y
-CONFIG_MIPS_MSC=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_BOARDS_GEN=y
-CONFIG_MIPS_GT64120=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_CPU_MIPS64_R1=y
-CONFIG_SYS_HAS_CPU_NEVADA=y
-CONFIG_SYS_HAS_CPU_RM7000=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_BOARD_SCACHE=y
-CONFIG_RM7000_CPU_SCACHE=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_HAS_SMARTMIPS is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_SMARTMIPS=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-
-#
-# IP: Virtual Server Configuration
-#
-CONFIG_IP_VS=m
-# CONFIG_IP_VS_DEBUG is not set
-CONFIG_IP_VS_TAB_BITS=12
-
-#
-# IPVS transport protocol load balancing support
-#
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-
-#
-# IPVS scheduler
-#
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-
-#
-# IPVS application helper
-#
-CONFIG_IP_VS_FTP=m
-CONFIG_IPV6=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=y
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NF_CONNTRACK_ENABLED=m
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CT_PROTO_GRE=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT=m
-CONFIG_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
-CONFIG_NF_NAT_FTP=m
-CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
-CONFIG_NF_NAT_SIP=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
-#
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
-CONFIG_BRIDGE_NF_EBTABLES=m
-CONFIG_BRIDGE_EBT_BROUTE=m
-CONFIG_BRIDGE_EBT_T_FILTER=m
-CONFIG_BRIDGE_EBT_T_NAT=m
-CONFIG_BRIDGE_EBT_802_3=m
-CONFIG_BRIDGE_EBT_AMONG=m
-CONFIG_BRIDGE_EBT_ARP=m
-CONFIG_BRIDGE_EBT_IP=m
-CONFIG_BRIDGE_EBT_LIMIT=m
-CONFIG_BRIDGE_EBT_MARK=m
-CONFIG_BRIDGE_EBT_PKTTYPE=m
-CONFIG_BRIDGE_EBT_STP=m
-CONFIG_BRIDGE_EBT_VLAN=m
-CONFIG_BRIDGE_EBT_ARPREPLY=m
-CONFIG_BRIDGE_EBT_DNAT=m
-CONFIG_BRIDGE_EBT_MARK_T=m
-CONFIG_BRIDGE_EBT_REDIRECT=m
-CONFIG_BRIDGE_EBT_SNAT=m
-CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-CONFIG_ATALK=m
-CONFIG_DEV_APPLETALK=m
-CONFIG_IPDDP=m
-CONFIG_IPDDP_ENCAP=y
-CONFIG_IPDDP_DECAP=y
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-CONFIG_NET_CLS_POLICE=y
-CONFIG_NET_CLS_IND=y
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-CONFIG_WIRELESS_EXT=y
-CONFIG_FIB_RULES=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-CONFIG_BLK_DEV_UMEM=m
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
-CONFIG_ATA_OVER_ETH=m
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_IDE_MAX_HWIFS=4
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-CONFIG_SCSI_NETLINK=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=m
-CONFIG_CHR_DEV_OSST=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-
-#
-# SCSI Transports
-#
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_SCSI_SAS_ATTRS=m
-CONFIG_SCSI_SAS_LIBSAS=m
-CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
-
-#
-# SCSI low-level drivers
-#
-CONFIG_ISCSI_TCP=m
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-CONFIG_SCSI_AIC94XX=m
-# CONFIG_AIC94XX_DEBUG is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_EMC=m
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-CONFIG_PHYLIB=m
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-CONFIG_LAN_SAA9730=y
-# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-CONFIG_MOUSE_SERIAL=m
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_RAW=y
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=m
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-CONFIG_ROMFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_QUOTA=y
-# CONFIG_QFMT_V1 is not set
-CONFIG_QFMT_V2=y
-CONFIG_QUOTACTL=y
-CONFIG_DNOTIFY=y
-CONFIG_AUTOFS_FS=y
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=m
-CONFIG_VXFS_FS=m
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig
index c0e42e74dfbd..d8694332b344 100644
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -16,9 +16,7 @@ CONFIG_BCM47XX=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index 3b42cea2e402..a3bbbf067a3b 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc7
-# Mon Mar 31 08:11:19 2008
+# Linux kernel version: 2.6.26-rc8
+# Wed Jul  2 17:02:55 2008
 #
 CONFIG_MIPS=y
 
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
@@ -148,6 +146,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
@@ -156,6 +155,7 @@ CONFIG_SMP=y
 CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_NR_CPUS_DEFAULT_4=y
 CONFIG_NR_CPUS=4
+# CONFIG_MIPS_CMP is not set
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -223,6 +223,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -241,12 +242,14 @@ CONFIG_SLAB=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -302,7 +305,6 @@ CONFIG_BINFMT_ELF32=y
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 
 #
@@ -399,9 +401,11 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m
 CONFIG_INET6_XFRM_MODE_BEET=m
 CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
 CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
 CONFIG_IPV6_SUBTREES=y
+# CONFIG_IPV6_MROUTE is not set
 CONFIG_NETWORK_SECMARK=y
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
@@ -600,7 +604,7 @@ CONFIG_BLK_DEV_IT8213=m
 CONFIG_BLK_DEV_TC86C001=m
 # CONFIG_BLK_DEV_IDE_SWARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -617,11 +621,12 @@ CONFIG_SCSI_PROC_FS=y
 # SCSI support type (disk, tape, CD-ROM)
 #
 CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
+CONFIG_CHR_DEV_ST=m
 # CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_CHR_DEV_SCH=m
 
 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -650,6 +655,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
@@ -675,7 +681,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -685,7 +694,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-CONFIG_SATA_SIL24=y
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -730,12 +738,17 @@ CONFIG_PATA_SIL680=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -797,7 +810,6 @@ CONFIG_SB1250_MAC=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -815,6 +827,7 @@ CONFIG_NETXEN_NIC=m
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -822,6 +835,7 @@ CONFIG_NETXEN_NIC=m
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -867,6 +881,7 @@ CONFIG_SERIO_RAW=m
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -903,7 +918,6 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -914,13 +928,6 @@ CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
 
 #
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
 # I2C Hardware Bus support
 #
 # CONFIG_I2C_ALI1535 is not set
@@ -946,6 +953,7 @@ CONFIG_I2C_SIBYTE=y
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
 # CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
 
 #
 # Miscellaneous I2C Chip support
@@ -955,23 +963,18 @@ CONFIG_SENSORS_EEPROM=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 CONFIG_SENSORS_PCF8591=y
-# CONFIG_TPS65010 is not set
 CONFIG_SENSORS_MAX6875=y
 # CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
 CONFIG_I2C_DEBUG_CHIP=y
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -984,12 +987,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -1015,6 +1028,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1023,13 +1038,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1123,7 +1135,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -1194,6 +1205,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1204,6 +1216,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1217,6 +1230,7 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1237,53 +1251,82 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_AEAD=m
 CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=y
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
 CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
 CONFIG_CRYPTO_CAST5=m
 CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
 CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
 CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_AUTHENC=m
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1292,9 +1335,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=m
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index a94f14b5c8fa..185df23fd460 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -14,9 +14,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index b7295e988381..eb44b72254af 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc5
-# Thu Sep  6 13:14:29 2007
+# Linux kernel version: 2.6.26
+# Fri Jul 25 10:25:34 2008
 #
 CONFIG_MIPS=y
 
@@ -10,13 +10,13 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 CONFIG_MIPS_COBALT=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
@@ -26,6 +26,7 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -36,19 +37,25 @@ CONFIG_MIPS_COBALT=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MIKROTIK_RB532 is not set
 # CONFIG_WR_PPMC is not set
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_GT641XX=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_EARLY_PRINTK=y
@@ -110,6 +117,7 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -117,10 +125,16 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -153,23 +167,28 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -179,23 +198,37 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+# CONFIG_HAVE_CLK is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -209,18 +242,18 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_I8253=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -234,8 +267,8 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
 
 #
 # Networking
@@ -252,6 +285,7 @@ CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
 # CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 CONFIG_NET_KEY_MIGRATE=y
 CONFIG_INET=y
@@ -271,6 +305,7 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -278,8 +313,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -296,10 +329,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -307,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -328,9 +358,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -339,6 +372,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -352,6 +386,7 @@ CONFIG_MTD_BLKDEVS=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -386,6 +421,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x0
 CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -425,7 +461,9 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -464,10 +502,15 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -477,7 +520,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -506,7 +548,9 @@ CONFIG_ATA=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
@@ -520,29 +564,27 @@ CONFIG_ATA=y
 CONFIG_PATA_VIA=y
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
 
 #
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -564,7 +606,12 @@ CONFIG_TULIP=y
 # CONFIG_DM9102 is not set
 # CONFIG_ULI526X is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -574,6 +621,7 @@ CONFIG_TULIP=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -582,7 +630,6 @@ CONFIG_TULIP=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
@@ -590,7 +637,6 @@ CONFIG_TULIP=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -609,7 +655,6 @@ CONFIG_INPUT_POLLDEV=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -644,7 +689,9 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -666,65 +713,122 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-CONFIG_COBALT_LCD=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_COBALT=y
+# CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
@@ -745,6 +849,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=m
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -753,15 +858,18 @@ CONFIG_USB=m
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -775,6 +883,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -787,6 +896,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_DEBUG is not set
 # CONFIG_USB_STORAGE_DATAFAB is not set
 # CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
 # CONFIG_USB_STORAGE_DPCM is not set
 # CONFIG_USB_STORAGE_USBAT is not set
 # CONFIG_USB_STORAGE_SDDR09 is not set
@@ -795,6 +905,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -802,15 +913,11 @@ CONFIG_USB_STORAGE=m
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -835,16 +942,10 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -860,6 +961,8 @@ CONFIG_LEDS_COBALT_RAQ=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -884,9 +987,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -894,23 +998,7 @@ CONFIG_RTC_DRV_CMOS=y
 #
 # on-CPU RTC drivers
 #
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -925,22 +1013,22 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4DEV_FS=y
+CONFIG_EXT4DEV_FS_XATTR=y
+CONFIG_EXT4DEV_FS_POSIX_ACL=y
+CONFIG_EXT4DEV_FS_SECURITY=y
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -969,7 +1057,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 CONFIG_CONFIGFS_FS=y
 
 #
@@ -985,32 +1072,28 @@ CONFIG_CONFIGFS_FS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1024,34 +1107,26 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
 
 #
@@ -1059,14 +1134,95 @@ CONFIG_CMDLINE=""
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index 36578968d386..a279165e3a7d 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
@@ -1094,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index 5a90740c363a..8944d15caf13 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
@@ -1094,7 +1092,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index 76f37a1159fe..ab17973107fd 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_DB1200=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
@@ -1176,7 +1174,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE="mem=48M"
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index 508c91944f30..b65803f19352 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
@@ -1394,7 +1392,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index 0c2c70d21db9..a190ac07740b 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_DB1550=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
@@ -1211,7 +1209,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index 58c2cd68c3a7..9e65e6a2dcb3 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 CONFIG_MACH_DECSTATION=y
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index 90d81f5dcebc..1bd84d42b14f 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -14,9 +14,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig
index f9a003c2b3a1..634bb4eaf132 100644
--- a/arch/mips/configs/emma2rh_defconfig
+++ b/arch/mips/configs/emma2rh_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig
index 15efacc75d73..4e465e945991 100644
--- a/arch/mips/configs/excite_defconfig
+++ b/arch/mips/configs/excite_defconfig
@@ -27,9 +27,7 @@ CONFIG_BASLER_EXCITE=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
@@ -1271,7 +1269,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig
index 5887a1735fba..620980081a30 100644
--- a/arch/mips/configs/fulong_defconfig
+++ b/arch/mips/configs/fulong_defconfig
@@ -14,9 +14,7 @@ CONFIG_LEMOTE_FULONG=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_PNX8550_JBS is not set
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index 4f5e56c9335e..cc8e6bf2b245 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -15,9 +15,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index f40e437bd9e5..831d3e5a1ea6 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -14,9 +14,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
@@ -945,7 +943,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig
index ec188be9a67a..822b01f643e3 100644
--- a/arch/mips/configs/ip28_defconfig
+++ b/arch/mips/configs/ip28_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index 2c5c624c5d42..fe4699df9626 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index 56148745e8f2..bbacc35d804f 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 CONFIG_MACH_JAZZ=y
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index a7cd67753aac..9d5bd2a0af3d 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Thu Aug  2 23:07:36 2007
+# Linux kernel version: 2.6.26-rc9
+# Fri Jul 11 23:01:36 2008
 #
 CONFIG_MIPS=y
 
@@ -10,13 +10,13 @@ CONFIG_MIPS=y
 #
 # CONFIG_MACH_ALCHEMY is not set
 # CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
@@ -26,6 +26,7 @@ CONFIG_MIPS=y
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_SGI_IP22 is not set
 # CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
 # CONFIG_SGI_IP32 is not set
 # CONFIG_SIBYTE_CRHINE is not set
 # CONFIG_SIBYTE_CARMEL is not set
@@ -36,28 +37,37 @@ CONFIG_MIPS=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_BIGSUR is not set
 # CONFIG_SNI_RM is not set
-CONFIG_TOSHIBA_JMR3927=y
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_MACH_TX39XX=y
+# CONFIG_MACH_TX49XX is not set
 # CONFIG_WR_PPMC is not set
+CONFIG_TOSHIBA_JMR3927=y
+CONFIG_SOC_TX3927=y
+# CONFIG_TOSHIBA_FPCIB0 is not set
+CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_TXX9=y
+CONFIG_GPIO_TXX9=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
 # CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_TXX9=y
-CONFIG_MIPS_TX3927=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 
@@ -104,13 +114,20 @@ CONFIG_CPU_HAS_SYNC=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 # CONFIG_HZ_48 is not set
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_128 is not set
@@ -144,18 +161,25 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -168,6 +192,14 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -189,20 +221,19 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
 
 #
 # Bus options (PCI, PCMCIA, EISA, ISA, TC)
 #
 CONFIG_HW_HAS_PCI=y
 CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_MMU=y
 
 #
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
@@ -212,6 +243,7 @@ CONFIG_TRAD_SIGNALS=y
 #
 # Power management options
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PM is not set
 
 #
@@ -245,25 +277,21 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -271,6 +299,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 
@@ -279,6 +308,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 # CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
 
@@ -307,6 +337,7 @@ CONFIG_BLK_DEV=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -318,10 +349,6 @@ CONFIG_BLK_DEV=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
 
 #
@@ -329,7 +356,7 @@ CONFIG_BLK_DEV=y
 #
 
 #
-# An alternative FireWire stack is available with EXPERIMENTAL=y
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
 #
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -339,10 +366,27 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
+# CONFIG_MII is not set
 # CONFIG_AX88796 is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
@@ -351,6 +395,10 @@ CONFIG_MII=y
 # CONFIG_DM9000 is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
@@ -358,13 +406,13 @@ CONFIG_NET_PCI=y
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
 CONFIG_TC35815=y
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -379,6 +427,7 @@ CONFIG_TC35815=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_PPP is not set
@@ -400,7 +449,6 @@ CONFIG_INPUT=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -424,6 +472,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -431,7 +480,6 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-# CONFIG_MOXA_SMARTIO_NEW is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_SYNCLINK_GT is not set
@@ -463,22 +511,30 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
 
 #
-# SPI support
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -495,29 +551,46 @@ CONFIG_TXX9_WDT=y
 # CONFIG_WDTPCI is not set
 
 #
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
 # Graphics support
 #
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Sound
@@ -526,7 +599,9 @@ CONFIG_TXX9_WDT=y
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -551,9 +626,10 @@ CONFIG_RTC_INTF_DEV=y
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 CONFIG_RTC_DRV_DS1742=y
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -561,23 +637,6 @@ CONFIG_RTC_DRV_DS1742=y
 #
 # on-CPU RTC drivers
 #
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -590,12 +649,10 @@ CONFIG_RTC_DRV_DS1742=y
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -622,7 +679,7 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
 
 #
 # Miscellaneous filesystems
@@ -630,17 +687,15 @@ CONFIG_RAMFS=y
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -656,10 +711,6 @@ CONFIG_SUNRPC=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
 
 #
@@ -667,13 +718,15 @@ CONFIG_MSDOS_PARTITION=y
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
+# CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
 
 #
@@ -687,6 +740,7 @@ CONFIG_CMDLINE=""
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig
index e6aef999854c..bc9159fda728 100644
--- a/arch/mips/configs/lasat_defconfig
+++ b/arch/mips/configs/lasat_defconfig
@@ -15,9 +15,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 CONFIG_LASAT=y
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 3d0da952811c..74daa0cf87e6 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -15,9 +15,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 CONFIG_MIPS_MALTA=y
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
@@ -68,7 +66,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
 CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_IRQ_CPU=y
-CONFIG_MIPS_BOARDS_GEN=y
 CONFIG_PCI_GT64XXX_PCI0=y
 CONFIG_SWAP_IO_SPACE=y
 CONFIG_BOOT_ELF32=y
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
index 4f6bce99d5cf..2c0a6314e901 100644
--- a/arch/mips/configs/mipssim_defconfig
+++ b/arch/mips/configs/mipssim_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 CONFIG_MIPS_SIM=y
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index 27e23fc9363a..8c720e51795b 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -14,9 +14,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index b12b73f6d74f..dd13db4d0fb9 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
@@ -1417,8 +1415,6 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 # CONFIG_MIPS_UNCACHED is not set
 
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index fa3aa3919448..db9272677aa2 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -14,9 +14,7 @@ CONFIG_MACH_ALCHEMY=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
@@ -3022,7 +3020,6 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index 1d0157d3a5bb..9e21e333a2fc 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
@@ -1087,7 +1085,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index d0491a05ee58..af67ed4f71ae 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
@@ -1204,7 +1202,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 16d78d3cd2aa..7956f56cbf3e 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -27,9 +27,7 @@ CONFIG_MIPS_PB1550=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
@@ -1197,7 +1195,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 
 #
 # Security options
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index 780c7fc24b82..723bd5176a35 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
@@ -1218,10 +1216,8 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig
index 267f21ed1d0f..b5052fb42e9e 100644
--- a/arch/mips/configs/pnx8550-stb810_defconfig
+++ b/arch/mips/configs/pnx8550-stb810_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
@@ -1208,10 +1206,8 @@ CONFIG_DEBUG_SLAB=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp"
+CONFIG_CMDLINE="console=ttyS1,38400n8 root=/dev/nfs ip=bootp"
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig
new file mode 100644
index 000000000000..f28dc32974e5
--- /dev/null
+++ b/arch/mips/configs/rb532_defconfig
@@ -0,0 +1,1314 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25
+# Mon Apr 28 12:24:17 2008
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+CONFIG_MIKROTIK_RB532=y
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+# CONFIG_WR_PPMC is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_BOOT_RAW=y
+CONFIG_CEVT_R4K=y
+CONFIG_CSRC_R4K=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_MIPS_L1_CACHE_SHIFT=4
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPSR1=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+CONFIG_HZ_100=y
+# CONFIG_HZ_128 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_KEXEC is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+CONFIG_MMU=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+CONFIG_ARPD=y
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=m
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=y
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+# CONFIG_DEFAULT_CUBIC is not set
+# CONFIG_DEFAULT_HTCP is not set
+CONFIG_DEFAULT_VEGAS=y
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="vegas"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+# CONFIG_BRIDGE_NETFILTER is not set
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SANE is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=y
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+CONFIG_NETFILTER_XT_MATCH_LIMIT=y
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=y
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=y
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=y
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_TARGET_REJECT=y
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_NF_NAT=y
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=y
+# CONFIG_IP_NF_TARGET_REDIRECT is not set
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
+CONFIG_IP_NF_MANGLE=y
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
+CONFIG_IP_NF_RAW=m
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+CONFIG_LLC2=m
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+# CONFIG_NET_SCH_HTB is not set
+# CONFIG_NET_SCH_HFSC is not set
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RR=m
+# CONFIG_NET_SCH_RED is not set
+# CONFIG_NET_SCH_SFQ is not set
+# CONFIG_NET_SCH_TEQL is not set
+# CONFIG_NET_SCH_TBF is not set
+# CONFIG_NET_SCH_GRED is not set
+# CONFIG_NET_SCH_DSMARK is not set
+CONFIG_NET_SCH_NETEM=m
+# CONFIG_NET_SCH_INGRESS is not set
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+# CONFIG_NET_ACT_NAT is not set
+CONFIG_NET_ACT_PEDIT=m
+# CONFIG_NET_ACT_SIMP is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_HAMRADIO=y
+
+#
+# Packet Radio protocols
+#
+# CONFIG_AX25 is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+CONFIG_MTD_BLOCK2MTD=y
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+CONFIG_PATA_RB532=y
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_IFB=m
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_KORINA=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_TC35815 is not set
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+CONFIG_VIA_RHINE=y
+# CONFIG_VIA_RHINE_MMIO is not set
+CONFIG_VIA_RHINE_NAPI=y
+# CONFIG_SC92031 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_LIBERTAS is not set
+# CONFIG_HERMES is not set
+CONFIG_ATMEL=m
+# CONFIG_PCI_ATMEL is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+
+#
+# Video decoders
+#
+
+#
+# Video and audio decoders
+#
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+# CONFIG_HID is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/rbhma4200_defconfig b/arch/mips/configs/rbhma4200_defconfig
deleted file mode 100644
index 470f6f4d3ea2..000000000000
--- a/arch/mips/configs/rbhma4200_defconfig
+++ /dev/null
@@ -1,669 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Thu Aug  2 22:55:57 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-CONFIG_TOSHIBA_RBTX4927=y
-# CONFIG_TOSHIBA_RBTX4938 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_TOSHIBA_FPCIB0 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_TXX9=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-CONFIG_CPU_TX49XX=y
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_TX49XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# An alternative FireWire stack is available with EXPERIMENTAL=y
-#
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NE2000=y
-# CONFIG_NET_PCI is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_TXX9=y
-CONFIG_HAS_TXX9_SERIAL=y
-CONFIG_SERIAL_TXX9_NR_UARTS=6
-CONFIG_SERIAL_TXX9_CONSOLE=y
-CONFIG_SERIAL_TXX9_STDSERIAL=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_TXX9_WDT=m
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-CONFIG_RTC_DRV_DS1742=y
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/rbhma4500_defconfig b/arch/mips/configs/rbhma4500_defconfig
deleted file mode 100644
index 5a39f56b175e..000000000000
--- a/arch/mips/configs/rbhma4500_defconfig
+++ /dev/null
@@ -1,701 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc1
-# Thu Aug  2 22:59:53 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-CONFIG_TOSHIBA_RBTX4938=y
-# CONFIG_WR_PPMC is not set
-
-#
-# Multiplex Pin Select
-#
-CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y
-# CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set
-# CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_GPIO=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_TXX9=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_LOONGSON2 is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-CONFIG_CPU_TX49XX=y
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_TX49XX=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=0
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_SECCOMP is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# An alternative FireWire stack is available with EXPERIMENTAL=y
-#
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NE2000=y
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_TC35815=y
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_TXX9=y
-CONFIG_HAS_TXX9_SERIAL=y
-CONFIG_SERIAL_TXX9_NR_UARTS=6
-CONFIG_SERIAL_TXX9_CONSOLE=y
-CONFIG_SERIAL_TXX9_STDSERIAL=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_TXX9=y
-
-#
-# SPI Protocol Masters
-#
-CONFIG_SPI_AT25=y
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_TXX9_WDT=m
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_INFINIBAND is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# SPI RTC drivers
-#
-CONFIG_RTC_DRV_RS5C348=y
-# CONFIG_RTC_DRV_MAX6902 is not set
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
new file mode 100644
index 000000000000..c7c0864b8ce9
--- /dev/null
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -0,0 +1,766 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc9
+# Fri Jul 11 23:03:21 2008
+#
+CONFIG_MIPS=y
+
+#
+# Machine selection
+#
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_BASLER_EXCITE is not set
+# CONFIG_BCM47XX is not set
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_LASAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MIPS_MALTA is not set
+# CONFIG_MIPS_SIM is not set
+# CONFIG_MARKEINS is not set
+# CONFIG_MACH_VR41XX is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SNI_RM is not set
+# CONFIG_MACH_TX39XX is not set
+CONFIG_MACH_TX49XX=y
+# CONFIG_WR_PPMC is not set
+CONFIG_TOSHIBA_RBTX4927=y
+CONFIG_TOSHIBA_RBTX4938=y
+CONFIG_SOC_TX4927=y
+CONFIG_SOC_TX4938=y
+# CONFIG_TOSHIBA_FPCIB0 is not set
+CONFIG_PICMG_PCI_BACKPLANE_DEFAULT=y
+
+#
+# Multiplex Pin Select
+#
+CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61=y
+# CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND is not set
+# CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA is not set
+CONFIG_PCI_TX4927=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_TXX9=y
+CONFIG_CSRC_R4K=y
+CONFIG_GPIO_TXX9=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+# CONFIG_HOTPLUG_CPU is not set
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_GPIO=y
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
+CONFIG_IRQ_CPU=y
+CONFIG_IRQ_TXX9=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+
+#
+# CPU selection
+#
+# CONFIG_CPU_LOONGSON2 is not set
+# CONFIG_CPU_MIPS32_R1 is not set
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+CONFIG_CPU_TX49XX=y
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_SYS_HAS_CPU_TX49XX=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
+
+#
+# Kernel type
+#
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_SYNC=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_48 is not set
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_128 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_256 is not set
+# CONFIG_HZ_1000 is not set
+# CONFIG_HZ_1024 is not set
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_HZ=250
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_SECCOMP is not set
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+# CONFIG_EXPERIMENTAL is not set
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+# CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Bus options (PCI, PCMCIA, EISA, ISA, TC)
+#
+CONFIG_HW_HAS_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+CONFIG_MMU=y
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_TRAD_SIGNALS=y
+
+#
+# Power management options
+#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# A new alternative FireWire stack is available with EXPERIMENTAL=y
+#
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_AX88796 is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_DM9000 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_NE2000=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+CONFIG_TC35815=y
+# CONFIG_EEPRO100 is not set
+# CONFIG_E100 is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_TXX9=y
+CONFIG_HAS_TXX9_SERIAL=y
+CONFIG_SERIAL_TXX9_NR_UARTS=6
+CONFIG_SERIAL_TXX9_CONSOLE=y
+CONFIG_SERIAL_TXX9_STDSERIAL=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_TXX9=y
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_AT25=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_TXX9_WDT=m
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+CONFIG_RTC_DRV_RS5C348=y
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+CONFIG_RTC_DRV_DS1742=y
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SAMPLES is not set
+CONFIG_CMDLINE=""
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index 56371b860eb0..0f4da0325ea4 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 4b8799802788..a9acaa2f9da3 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 # CONFIG_MACH_VR41XX is not set
@@ -965,7 +963,6 @@ CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_SAMPLES is not set
 CONFIG_CMDLINE=""
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_SB1XXX_CORELIS is not set
 
 #
diff --git a/arch/mips/configs/sead_defconfig b/arch/mips/configs/sead_defconfig
deleted file mode 100644
index 3ee75b15c0b0..000000000000
--- a/arch/mips/configs/sead_defconfig
+++ /dev/null
@@ -1,642 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Sun Feb 18 21:28:10 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_SEAD=y
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_MIPS_BOARDS_GEN=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_CPU_MIPS64_R1=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_LLSC=y
-# CONFIG_CPU_HAS_SMARTMIPS is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_SMARTMIPS=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_RELAY=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=18432
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_RAID_ATTRS=y
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC16=y
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig
index 8dd3ae39bcad..b5059881bc7e 100644
--- a/arch/mips/configs/tb0219_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index 2ba240e897c6..b06a716bf23f 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index a5d0f3c55ed1..46512cf7ce04 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -16,9 +16,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LASAT is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index edf90b321fe6..b437eb7f8672 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -14,9 +14,7 @@ CONFIG_MIPS=y
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
 # CONFIG_LEMOTE_FULONG is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MARKEINS is not set
 CONFIG_MACH_VR41XX=y
diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig
index 2e3c683b2052..fc2c56731b98 100644
--- a/arch/mips/configs/wrppmc_defconfig
+++ b/arch/mips/configs/wrppmc_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 CONFIG_WR_PPMC=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index b6178ffbc523..ea8249c75b3f 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -26,9 +26,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
@@ -829,8 +827,6 @@ CONFIG_FORCED_INLINING=y
 CONFIG_CROSSCOMPILE=y
 CONFIG_CMDLINE=""
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_KGDB is not set
-CONFIG_SYS_SUPPORTS_KGDB=y
 # CONFIG_RUNTIME_DEBUG is not set
 
 #
diff --git a/arch/mips/emma2rh/common/prom.c b/arch/mips/emma2rh/common/prom.c
index 0f791eb6bb66..5e92b3a9c5b8 100644
--- a/arch/mips/emma2rh/common/prom.c
+++ b/arch/mips/emma2rh/common/prom.c
@@ -34,12 +34,11 @@
 
 const char *get_system_type(void)
 {
-	switch (mips_machtype) {
-	case MACH_NEC_MARKEINS:
-		return "NEC EMMA2RH Mark-eins";
-	default:
-		return "Unknown NEC board";
-	}
+#if defined(CONFIG_MARKEINS)
+	return "NEC EMMA2RH Mark-eins";
+#else
+#error  Unknown NEC board
+#endif
 }
 
 /* [jsun@junsun.net] PMON passes arguments in C main() style */
@@ -63,10 +62,10 @@ void __init prom_init(void)
 	}
 
 #if defined(CONFIG_MARKEINS)
-	mips_machtype = MACH_NEC_MARKEINS;
 	add_memory_region(0, EMMA2RH_RAM_SIZE, BOOT_MEM_RAM);
+#else
+#error  Unknown NEC board
 #endif
-
 }
 
 void __init prom_free_prom_memory(void)
diff --git a/arch/mips/emma2rh/markeins/platform.c b/arch/mips/emma2rh/markeins/platform.c
index 11567702b155..d70627de7cfe 100644
--- a/arch/mips/emma2rh/markeins/platform.c
+++ b/arch/mips/emma2rh/markeins/platform.c
@@ -34,7 +34,6 @@
 #include <asm/bcache.h>
 #include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/gdb-stub.h>
 #include <asm/traps.h>
 #include <asm/debug.h>
 
diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c
index 62bfb455d1b1..822a20e21fa4 100644
--- a/arch/mips/emma2rh/markeins/setup.c
+++ b/arch/mips/emma2rh/markeins/setup.c
@@ -27,7 +27,6 @@
 #include <linux/types.h>
 #include <linux/initrd.h>
 #include <linux/irq.h>
-#include <linux/ide.h>
 #include <linux/ioport.h>
 #include <linux/param.h>	/* for HZ */
 #include <linux/root_dev.h>
@@ -41,7 +40,6 @@
 #include <asm/bcache.h>
 #include <asm/irq.h>
 #include <asm/reboot.h>
-#include <asm/gdb-stub.h>
 #include <asm/traps.h>
 #include <asm/debug.h>
 
diff --git a/arch/mips/fw/arc/identify.c b/arch/mips/fw/arc/identify.c
index 23066985a734..0ce9acf10c39 100644
--- a/arch/mips/fw/arc/identify.c
+++ b/arch/mips/fw/arc/identify.c
@@ -22,7 +22,6 @@
 struct smatch {
 	char *arcname;
 	char *liname;
-	int type;
 	int flags;
 };
 
@@ -30,47 +29,38 @@ static struct smatch mach_table[] = {
 	{
 		.arcname	= "SGI-IP22",
 		.liname		= "SGI Indy",
-		.type		= MACH_SGI_IP22,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "SGI-IP27",
 		.liname		= "SGI Origin",
-		.type		= MACH_SGI_IP27,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "SGI-IP28",
 		.liname		= "SGI IP28",
-		.type		= MACH_SGI_IP28,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "SGI-IP30",
 		.liname		= "SGI Octane",
-		.type		= MACH_SGI_IP30,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "SGI-IP32",
 		.liname		= "SGI O2",
-		.type		= MACH_SGI_IP32,
 		.flags		= PROM_FLAG_ARCS,
 	}, {
 		.arcname	= "Microsoft-Jazz",
 		.liname		= "Jazz MIPS_Magnum_4000",
-		.type		= MACH_MIPS_MAGNUM_4000,
 		.flags		= 0,
 	}, {
 		.arcname	= "PICA-61",
 		.liname		= "Jazz Acer_PICA_61",
-		.type		= MACH_ACER_PICA_61,
 		.flags		= 0,
 	}, {
 		.arcname	= "RM200PCI",
 		.liname		= "SNI RM200_PCI",
-		.type		= MACH_SNI_RM200_PCI,
 		.flags		= PROM_FLAG_DONT_FREE_TEMP,
 	}, {
 		.arcname	= "RM200PCI-R5K",
 		.liname		= "SNI RM200_PCI-R5K",
-		.type		= MACH_SNI_RM200_PCI,
 		.flags		= PROM_FLAG_DONT_FREE_TEMP,
 	}
 };
@@ -121,6 +111,5 @@ void __init prom_identify_arch(void)
 	mach = string_to_mach(iname);
 	system_type = mach->liname;
 
-	mips_machtype = mach->type;
 	prom_flags = mach->flags;
 }
diff --git a/arch/mips/gt64120/wrppmc/reset.c b/arch/mips/gt64120/wrppmc/reset.c
index c355cff38f6c..cc5474b24f06 100644
--- a/arch/mips/gt64120/wrppmc/reset.c
+++ b/arch/mips/gt64120/wrppmc/reset.c
@@ -5,10 +5,12 @@
  *
  * Copyright (C) 1997 Ralf Baechle
  */
+#include <linux/irqflags.h>
 #include <linux/kernel.h>
 
 #include <asm/cacheflush.h>
 #include <asm/mipsregs.h>
+#include <asm/processor.h>
 
 void wrppmc_machine_restart(char *command)
 {
@@ -32,15 +34,7 @@ void wrppmc_machine_halt(void)
 
 	printk(KERN_NOTICE "You can safely turn off the power\n");
 	while (1) {
-		__asm__(
-			".set\tmips3\n\t"
-			"wait\n\t"
-			".set\tmips0"
-		);
+		if (cpu_wait)
+			cpu_wait();
 	}
 }
-
-void wrppmc_machine_power_off(void)
-{
-	wrppmc_machine_halt();
-}
diff --git a/arch/mips/gt64120/wrppmc/setup.c b/arch/mips/gt64120/wrppmc/setup.c
index 728ef6a80edd..ca65c84031a7 100644
--- a/arch/mips/gt64120/wrppmc/setup.c
+++ b/arch/mips/gt64120/wrppmc/setup.c
@@ -98,11 +98,10 @@ void __init plat_mem_setup(void)
 {
 	extern void wrppmc_machine_restart(char *command);
 	extern void wrppmc_machine_halt(void);
-	extern void wrppmc_machine_power_off(void);
 
 	_machine_restart = wrppmc_machine_restart;
 	_machine_halt	 = wrppmc_machine_halt;
-	pm_power_off	 = wrppmc_machine_power_off;
+	pm_power_off	 = wrppmc_machine_halt;
 
 	/* This makes the operations of 'in/out[bwl]' to the
 	 * physical address ( < KSEG0) can work via KSEG1
diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c
index a7947199c99b..b59ba6b93cdd 100644
--- a/arch/mips/jazz/setup.c
+++ b/arch/mips/jazz/setup.c
@@ -10,7 +10,6 @@
  * Copyright (C) 2007 by Thomas Bogendoerfer
  */
 #include <linux/eisa.h>
-#include <linux/hdreg.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
 #include <linux/sched.h>
@@ -18,7 +17,6 @@
 #include <linux/mm.h>
 #include <linux/console.h>
 #include <linux/fb.h>
-#include <linux/ide.h>
 #include <linux/pm.h>
 #include <linux/screen_info.h>
 #include <linux/platform_device.h>
@@ -76,10 +74,8 @@ void __init plat_mem_setup(void)
 
 	set_io_port_base(JAZZ_PORT_BASE);
 #ifdef CONFIG_EISA
-	if (mips_machtype == MACH_MIPS_MAGNUM_4000)
-		EISA_bus = 1;
+	EISA_bus = 1;
 #endif
-	isa_slot_offset = 0xe3000000;
 
 	/* request I/O space for devices used on all i[345]86 PCs */
 	for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++)
diff --git a/arch/mips/jmr3927/common/Makefile b/arch/mips/jmr3927/common/Makefile
deleted file mode 100644
index 8fd4fcccf10e..000000000000
--- a/arch/mips/jmr3927/common/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for the common code of TOSHIBA JMR-TX3927 board
-#
-
-obj-y	 += prom.o puts.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/jmr3927/common/prom.c b/arch/mips/jmr3927/common/prom.c
deleted file mode 100644
index 5398813e50e6..000000000000
--- a/arch/mips/jmr3927/common/prom.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *    PROM library initialisation code, assuming a version of
- *    pmon is the boot code.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ahennessy@mvista.com
- *
- * Based on arch/mips/au1000/common/prom.c
- *
- * This file was derived from Carsten Langgaard's
- * arch/mips/mips-boards/xx files.
- *
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-
-char * __init prom_getcmdline(void)
-{
-	return &(arcs_cmdline[0]);
-}
-
-void  __init prom_init_cmdline(void)
-{
-	char *cp;
-	int actr;
-	int prom_argc = fw_arg0;
-	char **prom_argv = (char **) fw_arg1;
-
-	actr = 1; /* Always ignore argv[0] */
-
-	cp = &(arcs_cmdline[0]);
-	while(actr < prom_argc) {
-	        strcpy(cp, prom_argv[actr]);
-		cp += strlen(prom_argv[actr]);
-		*cp++ = ' ';
-		actr++;
-	}
-	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
-		--cp;
-	*cp = '\0';
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
diff --git a/arch/mips/jmr3927/common/puts.c b/arch/mips/jmr3927/common/puts.c
deleted file mode 100644
index c611ab497888..000000000000
--- a/arch/mips/jmr3927/common/puts.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Low level uart routines to directly access a TX[34]927 SIO.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ahennessy@mvista.com or source@mvista.com
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * Based on arch/mips/au1000/common/puts.c
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/jmr3927/tx3927.h>
-
-#define TIMEOUT       0xffffff
-
-void
-prom_putchar(char c)
-{
-        int i = 0;
-
-        do {
-            i++;
-            if (i>TIMEOUT)
-                break;
-        } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS));
-	tx3927_sioptr(1)->tfifo = c;
-	return;
-}
-
-void
-puts(const char *cp)
-{
-    while (*cp)
-	prom_putchar(*cp++);
-    prom_putchar('\r');
-    prom_putchar('\n');
-}
diff --git a/arch/mips/jmr3927/rbhma3100/Makefile b/arch/mips/jmr3927/rbhma3100/Makefile
deleted file mode 100644
index d86e30dca8f3..000000000000
--- a/arch/mips/jmr3927/rbhma3100/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for TOSHIBA JMR-TX3927 board
-#
-
-obj-y	 			+= init.o irq.o setup.o
-obj-$(CONFIG_KGDB)		+= kgdb_io.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/jmr3927/rbhma3100/init.c b/arch/mips/jmr3927/rbhma3100/init.c
deleted file mode 100644
index 700b9cf8eb9d..000000000000
--- a/arch/mips/jmr3927/rbhma3100/init.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ahennessy@mvista.com
- *
- * arch/mips/jmr3927/common/init.c
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <asm/bootinfo.h>
-#include <asm/jmr3927/jmr3927.h>
-
-extern void  __init prom_init_cmdline(void);
-
-const char *get_system_type(void)
-{
-	return "Toshiba"
-#ifdef CONFIG_TOSHIBA_JMR3927
-	       " JMR_TX3927"
-#endif
-	;
-}
-
-extern void puts(const char *cp);
-
-void __init prom_init(void)
-{
-#ifdef CONFIG_TOSHIBA_JMR3927
-	/* CCFG */
-	if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
-		puts("Warning: TX3927 TLB off\n");
-#endif
-
-	prom_init_cmdline();
-	add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
-}
diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c
deleted file mode 100644
index 3a47e8ce1196..000000000000
--- a/arch/mips/jmr3927/rbhma3100/irq.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ahennessy@mvista.com
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-
-#include <asm/processor.h>
-#include <asm/jmr3927/jmr3927.h>
-
-#if JMR3927_IRQ_END > NR_IRQS
-#error JMR3927_IRQ_END > NR_IRQS
-#endif
-
-static unsigned char irc_level[TX3927_NUM_IR] = {
-	5, 5, 5, 5, 5, 5,	/* INT[5:0] */
-	7, 7,			/* SIO */
-	5, 5, 5, 0, 0,		/* DMA, PIO, PCI */
-	6, 6, 6			/* TMR */
-};
-
-/*
- * CP0_STATUS is a thread's resource (saved/restored on context switch).
- * So disable_irq/enable_irq MUST handle IOC/IRC registers.
- */
-static void mask_irq_ioc(unsigned int irq)
-{
-	/* 0: mask */
-	unsigned int irq_nr = irq - JMR3927_IRQ_IOC;
-	unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR);
-	unsigned int bit = 1 << irq_nr;
-	jmr3927_ioc_reg_out(imask & ~bit, JMR3927_IOC_INTM_ADDR);
-	/* flush write buffer */
-	(void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
-}
-static void unmask_irq_ioc(unsigned int irq)
-{
-	/* 0: mask */
-	unsigned int irq_nr = irq - JMR3927_IRQ_IOC;
-	unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR);
-	unsigned int bit = 1 << irq_nr;
-	jmr3927_ioc_reg_out(imask | bit, JMR3927_IOC_INTM_ADDR);
-	/* flush write buffer */
-	(void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned long cp0_cause = read_c0_cause();
-	int irq;
-
-	if ((cp0_cause & CAUSEF_IP7) == 0)
-		return;
-	irq = (cp0_cause >> CAUSEB_IP2) & 0x0f;
-
-	do_IRQ(irq + JMR3927_IRQ_IRC);
-}
-
-static irqreturn_t jmr3927_ioc_interrupt(int irq, void *dev_id)
-{
-	unsigned char istat = jmr3927_ioc_reg_in(JMR3927_IOC_INTS2_ADDR);
-	int i;
-
-	for (i = 0; i < JMR3927_NR_IRQ_IOC; i++) {
-		if (istat & (1 << i)) {
-			irq = JMR3927_IRQ_IOC + i;
-			do_IRQ(irq);
-		}
-	}
-	return IRQ_HANDLED;
-}
-
-static struct irqaction ioc_action = {
-	.handler = jmr3927_ioc_interrupt,
-	.mask = CPU_MASK_NONE,
-	.name = "IOC",
-};
-
-static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id)
-{
-	printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq);
-	printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
-	       tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
-
-	return IRQ_HANDLED;
-}
-static struct irqaction pcierr_action = {
-	.handler = jmr3927_pcierr_interrupt,
-	.mask = CPU_MASK_NONE,
-	.name = "PCI error",
-};
-
-static void __init jmr3927_irq_init(void);
-
-void __init arch_init_irq(void)
-{
-	/* Now, interrupt control disabled, */
-	/* all IRC interrupts are masked, */
-	/* all IRC interrupt mode are Low Active. */
-
-	/* mask all IOC interrupts */
-	jmr3927_ioc_reg_out(0, JMR3927_IOC_INTM_ADDR);
-	/* setup IOC interrupt mode (SOFT:High Active, Others:Low Active) */
-	jmr3927_ioc_reg_out(JMR3927_IOC_INTF_SOFT, JMR3927_IOC_INTP_ADDR);
-
-	/* clear PCI Soft interrupts */
-	jmr3927_ioc_reg_out(0, JMR3927_IOC_INTS1_ADDR);
-	/* clear PCI Reset interrupts */
-	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
-
-	jmr3927_irq_init();
-
-	/* setup IOC interrupt 1 (PCI, MODEM) */
-	setup_irq(JMR3927_IRQ_IOCINT, &ioc_action);
-
-#ifdef CONFIG_PCI
-	setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action);
-#endif
-
-	/* enable all CPU interrupt bits. */
-	set_c0_status(ST0_IM);	/* IE bit is still 0. */
-}
-
-static struct irq_chip jmr3927_irq_ioc = {
-	.name = "jmr3927_ioc",
-	.ack = mask_irq_ioc,
-	.mask = mask_irq_ioc,
-	.mask_ack = mask_irq_ioc,
-	.unmask = unmask_irq_ioc,
-};
-
-static void __init jmr3927_irq_init(void)
-{
-	u32 i;
-
-	txx9_irq_init(TX3927_IRC_REG);
-	for (i = 0; i < TXx9_MAX_IR; i++)
-		txx9_irq_set_pri(i, irc_level[i]);
-	for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
-		set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
-}
diff --git a/arch/mips/jmr3927/rbhma3100/kgdb_io.c b/arch/mips/jmr3927/rbhma3100/kgdb_io.c
deleted file mode 100644
index 342579cfdc01..000000000000
--- a/arch/mips/jmr3927/rbhma3100/kgdb_io.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Low level uart routines to directly access a TX[34]927 SIO.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ahennessy@mvista.com or source@mvista.com
- *
- * Based on arch/mips/ddb5xxx/ddb5477/kgdb_io.c
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/jmr3927/jmr3927.h>
-
-#define TIMEOUT       0xffffff
-
-static int remoteDebugInitialized = 0;
-static void debugInit(int baud);
-
-int putDebugChar(unsigned char c)
-{
-        int i = 0;
-
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(38400);
-	}
-
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (!(tx3927_sioptr(0)->cisr & TXx927_SICISR_TXALS));
-	tx3927_sioptr(0)->tfifo = c;
-
-	return 1;
-}
-
-unsigned char getDebugChar(void)
-{
-        int i = 0;
-	int dicr;
-	char c;
-
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(38400);
-	}
-
-	/* diable RX int. */
-	dicr = tx3927_sioptr(0)->dicr;
-	tx3927_sioptr(0)->dicr = 0;
-
-        do {
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (tx3927_sioptr(0)->disr & TXx927_SIDISR_UVALID)
-		;
-	c = tx3927_sioptr(0)->rfifo;
-
-	/* clear RX int. status */
-	tx3927_sioptr(0)->disr &= ~TXx927_SIDISR_RDIS;
-	/* enable RX int. */
-	tx3927_sioptr(0)->dicr = dicr;
-
-	return c;
-}
-
-static void debugInit(int baud)
-{
-	tx3927_sioptr(0)->lcr = 0x020;
-	tx3927_sioptr(0)->dicr = 0;
-	tx3927_sioptr(0)->disr = 0x4100;
-	tx3927_sioptr(0)->cisr = 0x014;
-	tx3927_sioptr(0)->fcr = 0;
-	tx3927_sioptr(0)->flcr = 0x02;
-	tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) |
-		TXx927_SIBGR_BCLK_T0;
-}
diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c
deleted file mode 100644
index f39c444e42d4..000000000000
--- a/arch/mips/jmr3927/rbhma3100/setup.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/*
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ahennessy@mvista.com
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-
-#include <asm/txx9tmr.h>
-#include <asm/txx9pio.h>
-#include <asm/reboot.h>
-#include <asm/jmr3927/jmr3927.h>
-#include <asm/mipsregs.h>
-
-extern void puts(const char *cp);
-
-/* don't enable - see errata */
-static int jmr3927_ccfg_toeon;
-
-static inline void do_reset(void)
-{
-#if 1	/* Resetting PCI bus */
-	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
-	jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR);
-	(void)jmr3927_ioc_reg_in(JMR3927_IOC_RESET_ADDR);	/* flush WB */
-	mdelay(1);
-	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
-#endif
-	jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR);
-}
-
-static void jmr3927_machine_restart(char *command)
-{
-	local_irq_disable();
-	puts("Rebooting...");
-	do_reset();
-}
-
-static void jmr3927_machine_halt(void)
-{
-	puts("JMR-TX3927 halted.\n");
-	while (1);
-}
-
-static void jmr3927_machine_power_off(void)
-{
-	puts("JMR-TX3927 halted. Please turn off the power.\n");
-	while (1);
-}
-
-void __init plat_time_init(void)
-{
-	txx9_clockevent_init(TX3927_TMR_REG(0),
-			     TXX9_IRQ_BASE + JMR3927_IRQ_IRC_TMR(0),
-			     JMR3927_IMCLK);
-	txx9_clocksource_init(TX3927_TMR_REG(1), JMR3927_IMCLK);
-}
-
-#define DO_WRITE_THROUGH
-#define DO_ENABLE_CACHE
-
-extern char * __init prom_getcmdline(void);
-static void jmr3927_board_init(void);
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
-
-void __init plat_mem_setup(void)
-{
-	char *argptr;
-
-	set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
-
-	_machine_restart = jmr3927_machine_restart;
-	_machine_halt = jmr3927_machine_halt;
-	pm_power_off = jmr3927_machine_power_off;
-
-	/*
-	 * IO/MEM resources.
-	 */
-	ioport_resource.start = pci_io_resource.start;
-	ioport_resource.end = pci_io_resource.end;
-	iomem_resource.start = 0;
-	iomem_resource.end = 0xffffffff;
-
-	/* Reboot on panic */
-	panic_timeout = 180;
-
-	/* cache setup */
-	{
-		unsigned int conf;
-#ifdef DO_ENABLE_CACHE
-		int mips_ic_disable = 0, mips_dc_disable = 0;
-#else
-		int mips_ic_disable = 1, mips_dc_disable = 1;
-#endif
-#ifdef DO_WRITE_THROUGH
-		int mips_config_cwfon = 0;
-		int mips_config_wbon = 0;
-#else
-		int mips_config_cwfon = 1;
-		int mips_config_wbon = 1;
-#endif
-
-		conf = read_c0_conf();
-		conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE | TX39_CONF_WBON | TX39_CONF_CWFON);
-		conf |= mips_ic_disable ? 0 : TX39_CONF_ICE;
-		conf |= mips_dc_disable ? 0 : TX39_CONF_DCE;
-		conf |= mips_config_wbon ? TX39_CONF_WBON : 0;
-		conf |= mips_config_cwfon ? TX39_CONF_CWFON : 0;
-
-		write_c0_conf(conf);
-		write_c0_cache(0);
-	}
-
-	/* initialize board */
-	jmr3927_board_init();
-
-	argptr = prom_getcmdline();
-
-	if ((argptr = strstr(argptr, "toeon")) != NULL)
-		jmr3927_ccfg_toeon = 1;
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "ip=")) == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " ip=bootp");
-	}
-
-#ifdef CONFIG_SERIAL_TXX9
-	{
-		extern int early_serial_txx9_setup(struct uart_port *port);
-		int i;
-		struct uart_port req;
-		for(i = 0; i < 2; i++) {
-			memset(&req, 0, sizeof(req));
-			req.line = i;
-			req.iotype = UPIO_MEM;
-			req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i);
-			req.mapbase = TX3927_SIO_REG(i);
-			req.irq = i == 0 ?
-				JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1;
-			if (i == 0)
-				req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-			req.uartclk = JMR3927_IMCLK;
-			early_serial_txx9_setup(&req);
-		}
-	}
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "console=")) == NULL) {
-		argptr = prom_getcmdline();
-		strcat(argptr, " console=ttyS1,115200");
-	}
-#endif
-#endif
-}
-
-static void tx3927_setup(void);
-
-static void __init jmr3927_board_init(void)
-{
-	tx3927_setup();
-
-	/* SIO0 DTR on */
-	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
-
-	jmr3927_led_set(0);
-
-	printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
-	       jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
-	       jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
-	       jmr3927_dipsw1(), jmr3927_dipsw2(),
-	       jmr3927_dipsw3(), jmr3927_dipsw4());
-}
-
-static void __init tx3927_setup(void)
-{
-	int i;
-#ifdef CONFIG_PCI
-	unsigned long mips_pci_io_base = JMR3927_PCIIO;
-	unsigned long mips_pci_io_size = JMR3927_PCIIO_SIZE;
-	unsigned long mips_pci_mem_base = JMR3927_PCIMEM;
-	unsigned long mips_pci_mem_size = JMR3927_PCIMEM_SIZE;
-	/* for legacy I/O, PCI I/O PCI Bus address must be 0 */
-	unsigned long mips_pci_io_pciaddr = 0;
-#endif
-
-	/* SDRAMC are configured by PROM */
-
-	/* ROMC */
-	tx3927_romcptr->cr[1] = JMR3927_ROMCE1 | 0x00030048;
-	tx3927_romcptr->cr[2] = JMR3927_ROMCE2 | 0x000064c8;
-	tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698;
-	tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218;
-
-	/* CCFG */
-	/* enable Timeout BusError */
-	if (jmr3927_ccfg_toeon)
-		tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
-
-	/* clear BusErrorOnWrite flag */
-	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
-	/* Disable PCI snoop */
-	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
-	/* do reset on watchdog */
-	tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
-
-#ifdef DO_WRITE_THROUGH
-	/* Enable PCI SNOOP - with write through only */
-	tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
-#endif
-
-	/* Pin selection */
-	tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL;
-	tx3927_ccfgptr->pcfg |=
-		TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL |
-		(TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1));
-
-	printk("TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
-	       tx3927_ccfgptr->crir,
-	       tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
-
-	/* TMR */
-	for (i = 0; i < TX3927_NR_TMR; i++)
-		txx9_tmr_init(TX3927_TMR_REG(i));
-
-	/* DMA */
-	tx3927_dmaptr->mcr = 0;
-	for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
-		/* reset channel */
-		tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
-		tx3927_dmaptr->ch[i].ccr = 0;
-	}
-	/* enable DMA */
-#ifdef __BIG_ENDIAN
-	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
-#else
-	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
-#endif
-
-#ifdef CONFIG_PCI
-	/* PCIC */
-	printk("TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:",
-	       tx3927_pcicptr->did, tx3927_pcicptr->vid,
-	       tx3927_pcicptr->rid);
-	if (!(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB)) {
-		printk("External\n");
-		/* XXX */
-	} else {
-		printk("Internal\n");
-
-		/* Reset PCI Bus */
-		jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
-		udelay(100);
-		jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI,
-				    JMR3927_IOC_RESET_ADDR);
-		udelay(100);
-		jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
-
-
-		/* Disable External PCI Config. Access */
-		tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD;
-#ifdef __BIG_ENDIAN
-		tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE |
-			TX3927_PCIC_LBC_TIBSE |
-			TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE;
-#endif
-		/* LB->PCI mappings */
-		tx3927_pcicptr->iomas = ~(mips_pci_io_size - 1);
-		tx3927_pcicptr->ilbioma = mips_pci_io_base;
-		tx3927_pcicptr->ipbioma = mips_pci_io_pciaddr;
-		tx3927_pcicptr->mmas = ~(mips_pci_mem_size - 1);
-		tx3927_pcicptr->ilbmma = mips_pci_mem_base;
-		tx3927_pcicptr->ipbmma = mips_pci_mem_base;
-		/* PCI->LB mappings */
-		tx3927_pcicptr->iobas = 0xffffffff;
-		tx3927_pcicptr->ioba = 0;
-		tx3927_pcicptr->tlbioma = 0;
-		tx3927_pcicptr->mbas = ~(mips_pci_mem_size - 1);
-		tx3927_pcicptr->mba = 0;
-		tx3927_pcicptr->tlbmma = 0;
-		/* Enable Direct mapping Address Space Decoder */
-		tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE;
-
-		/* Clear All Local Bus Status */
-		tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
-		/* Enable All Local Bus Interrupts */
-		tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL;
-		/* Clear All PCI Status Error */
-		tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL;
-		/* Enable All PCI Status Error Interrupts */
-		tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL;
-
-		/* PCIC Int => IRC IRQ10 */
-		tx3927_pcicptr->il = TX3927_IR_PCI;
-		/* Target Control (per errata) */
-		tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E;
-
-		/* Enable Bus Arbiter */
-		tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN;
-
-		tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER |
-			PCI_COMMAND_MEMORY |
-			PCI_COMMAND_IO |
-			PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-	}
-#endif /* CONFIG_PCI */
-
-	/* PIO */
-	/* PIO[15:12] connected to LEDs */
-	__raw_writel(0x0000f000, &tx3927_pioptr->dir);
-	__raw_writel(0, &tx3927_pioptr->maskcpu);
-	__raw_writel(0, &tx3927_pioptr->maskext);
-	txx9_gpio_init(TX3927_PIO_REG, 0, 16);
-	gpio_request(11, "dipsw1");
-	gpio_request(10, "dipsw2");
-	{
-		unsigned int conf;
-
-	conf = read_c0_conf();
-               if (!(conf & TX39_CONF_ICE))
-                       printk("TX3927 I-Cache disabled.\n");
-               if (!(conf & TX39_CONF_DCE))
-                       printk("TX3927 D-Cache disabled.\n");
-               else if (!(conf & TX39_CONF_WBON))
-                       printk("TX3927 D-Cache WriteThrough.\n");
-               else if (!(conf & TX39_CONF_CWFON))
-                       printk("TX3927 D-Cache WriteBack.\n");
-               else
-                       printk("TX3927 D-Cache WriteBack (CWF) .\n");
-	}
-}
-
-/* This trick makes rtc-ds1742 driver usable as is. */
-unsigned long __swizzle_addr_b(unsigned long port)
-{
-	if ((port & 0xffff0000) != JMR3927_IOC_NVRAMB_ADDR)
-		return port;
-	port = (port & 0xffff0000) | (port & 0x7fff << 1);
-#ifdef __BIG_ENDIAN
-	return port;
-#else
-	return port | 1;
-#endif
-}
-EXPORT_SYMBOL(__swizzle_addr_b);
-
-static int __init jmr3927_rtc_init(void)
-{
-	static struct resource __initdata res = {
-		.start	= JMR3927_IOC_NVRAMB_ADDR - IO_BASE,
-		.end	= JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev;
-	dev = platform_device_register_simple("rtc-ds1742", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-device_initcall(jmr3927_rtc_init);
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init jmr3927_wdt_init(void)
-{
-	return txx9_wdt_init(TX3927_TMR_REG(2));
-}
-device_initcall(jmr3927_wdt_init);
-
-/* Minimum CLK support */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	if (!strcmp(id, "imbus_clk"))
-		return (struct clk *)JMR3927_IMCLK;
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return (unsigned long)clk;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 65e46a6d4178..706f93974797 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -20,9 +20,6 @@ obj-$(CONFIG_CSRC_R4K)		+= csrc-r4k.o
 obj-$(CONFIG_CSRC_SB1250)	+= csrc-sb1250.o
 obj-$(CONFIG_SYNC_R4K)		+= sync-r4k.o
 
-binfmt_irix-objs	:= irixelf.o irixinv.o irixioctl.o irixsig.o	\
-			   irix5sys.o sysirix.o
-
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
 obj-$(CONFIG_MODULES)		+= mips_ksyms.o module.o
 
@@ -63,19 +60,18 @@ obj-$(CONFIG_I8259)		+= i8259.o
 obj-$(CONFIG_IRQ_CPU)		+= irq_cpu.o
 obj-$(CONFIG_IRQ_CPU_RM7K)	+= irq-rm7000.o
 obj-$(CONFIG_IRQ_CPU_RM9K)	+= irq-rm9000.o
-obj-$(CONFIG_MIPS_BOARDS_GEN)	+= irq-msc01.o
+obj-$(CONFIG_MIPS_MSC)		+= irq-msc01.o
 obj-$(CONFIG_IRQ_TXX9)		+= irq_txx9.o
 obj-$(CONFIG_IRQ_GT641XX)	+= irq-gt641xx.o
 obj-$(CONFIG_IRQ_GIC)		+= irq-gic.o
 
 obj-$(CONFIG_32BIT)		+= scall32-o32.o
 obj-$(CONFIG_64BIT)		+= scall64-64.o
-obj-$(CONFIG_BINFMT_IRIX)	+= binfmt_irix.o
 obj-$(CONFIG_MIPS32_COMPAT)	+= linux32.o ptrace32.o signal32.o
 obj-$(CONFIG_MIPS32_N32)	+= binfmt_elfn32.o scall64-n32.o signal_n32.o
 obj-$(CONFIG_MIPS32_O32)	+= binfmt_elfo32.o scall64-o32.o
 
-obj-$(CONFIG_KGDB)		+= gdb-low.o gdb-stub.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_PROC_FS)		+= proc.o
 
 obj-$(CONFIG_64BIT)		+= cpu-bugs64.o
diff --git a/arch/mips/kernel/early_printk.c b/arch/mips/kernel/early_printk.c
index 9dccfa4752b2..9ae813eb782e 100644
--- a/arch/mips/kernel/early_printk.c
+++ b/arch/mips/kernel/early_printk.c
@@ -10,6 +10,8 @@
 #include <linux/console.h>
 #include <linux/init.h>
 
+#include <asm/setup.h>
+
 extern void prom_putchar(char);
 
 static void __init
diff --git a/arch/mips/kernel/gdb-low.S b/arch/mips/kernel/gdb-low.S
deleted file mode 100644
index 2c446063636a..000000000000
--- a/arch/mips/kernel/gdb-low.S
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * gdb-low.S contains the low-level trap handler for the GDB stub.
- *
- * Copyright (C) 1995 Andreas Busse
- */
-#include <linux/sys.h>
-
-#include <asm/asm.h>
-#include <asm/errno.h>
-#include <asm/irqflags.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/gdb-stub.h>
-
-#ifdef CONFIG_32BIT
-#define DMFC0	mfc0
-#define DMTC0	mtc0
-#define LDC1	lwc1
-#define SDC1	lwc1
-#endif
-#ifdef CONFIG_64BIT
-#define DMFC0	dmfc0
-#define DMTC0	dmtc0
-#define LDC1	ldc1
-#define SDC1	ldc1
-#endif
-
-/*
- * [jsun] We reserves about 2x GDB_FR_SIZE in stack.  The lower (addressed)
- * part is used to store registers and passed to exception handler.
- * The upper part is reserved for "call func" feature where gdb client
- * saves some of the regs, setups call frame and passes args.
- *
- * A trace shows about 200 bytes are used to store about half of all regs.
- * The rest should be big enough for frame setup and passing args.
- */
-
-/*
- * The low level trap handler
- */
-		.align 	5
-		NESTED(trap_low, GDB_FR_SIZE, sp)
-		.set	noat
-		.set 	noreorder
-
-		mfc0	k0, CP0_STATUS
-		sll	k0, 3     		/* extract cu0 bit */
-		bltz	k0, 1f
-		move	k1, sp
-
-		/*
-		 * Called from user mode, go somewhere else.
-		 */
-		mfc0	k0, CP0_CAUSE
-		andi	k0, k0, 0x7c
-#ifdef CONFIG_64BIT
-		dsll	k0, k0, 1
-#endif
-		PTR_L	k1, saved_vectors(k0)
-		jr	k1
-		nop
-1:
-		move	k0, sp
-		PTR_SUBU sp, k1, GDB_FR_SIZE*2	# see comment above
-		LONG_S	k0, GDB_FR_REG29(sp)
-		LONG_S	$2, GDB_FR_REG2(sp)
-
-/*
- * First save the CP0 and special registers
- */
-
-		mfc0	v0, CP0_STATUS
-		LONG_S	v0, GDB_FR_STATUS(sp)
-		mfc0	v0, CP0_CAUSE
-		LONG_S	v0, GDB_FR_CAUSE(sp)
-		DMFC0	v0, CP0_EPC
-		LONG_S	v0, GDB_FR_EPC(sp)
-		DMFC0	v0, CP0_BADVADDR
-		LONG_S	v0, GDB_FR_BADVADDR(sp)
-		mfhi	v0
-		LONG_S	v0, GDB_FR_HI(sp)
-		mflo	v0
-		LONG_S	v0, GDB_FR_LO(sp)
-
-/*
- * Now the integer registers
- */
-
-		LONG_S	zero, GDB_FR_REG0(sp)		/* I know... */
-		LONG_S	$1, GDB_FR_REG1(sp)
-		/* v0 already saved */
-		LONG_S	$3, GDB_FR_REG3(sp)
-		LONG_S	$4, GDB_FR_REG4(sp)
-		LONG_S	$5, GDB_FR_REG5(sp)
-		LONG_S	$6, GDB_FR_REG6(sp)
-		LONG_S	$7, GDB_FR_REG7(sp)
-		LONG_S	$8, GDB_FR_REG8(sp)
-		LONG_S	$9, GDB_FR_REG9(sp)
-		LONG_S	$10, GDB_FR_REG10(sp)
-		LONG_S	$11, GDB_FR_REG11(sp)
-		LONG_S	$12, GDB_FR_REG12(sp)
-		LONG_S	$13, GDB_FR_REG13(sp)
-		LONG_S	$14, GDB_FR_REG14(sp)
-		LONG_S	$15, GDB_FR_REG15(sp)
-		LONG_S	$16, GDB_FR_REG16(sp)
-		LONG_S	$17, GDB_FR_REG17(sp)
-		LONG_S	$18, GDB_FR_REG18(sp)
-		LONG_S	$19, GDB_FR_REG19(sp)
-		LONG_S	$20, GDB_FR_REG20(sp)
-		LONG_S	$21, GDB_FR_REG21(sp)
-		LONG_S	$22, GDB_FR_REG22(sp)
-		LONG_S	$23, GDB_FR_REG23(sp)
-		LONG_S	$24, GDB_FR_REG24(sp)
-		LONG_S	$25, GDB_FR_REG25(sp)
-		LONG_S	$26, GDB_FR_REG26(sp)
-		LONG_S	$27, GDB_FR_REG27(sp)
-		LONG_S	$28, GDB_FR_REG28(sp)
-		/* sp already saved */
-		LONG_S	$30, GDB_FR_REG30(sp)
-		LONG_S	$31, GDB_FR_REG31(sp)
-
-		CLI				/* disable interrupts */
-		TRACE_IRQS_OFF
-
-/*
- * Followed by the floating point registers
- */
-		mfc0	v0, CP0_STATUS		/* FPU enabled? */
-		srl	v0, v0, 16
-		andi	v0, v0, (ST0_CU1 >> 16)
-
-		beqz	v0,2f			/* disabled, skip */
-		 nop
-
-		SDC1	$0, GDB_FR_FPR0(sp)
-		SDC1	$1, GDB_FR_FPR1(sp)
-		SDC1	$2, GDB_FR_FPR2(sp)
-		SDC1	$3, GDB_FR_FPR3(sp)
-		SDC1	$4, GDB_FR_FPR4(sp)
-		SDC1	$5, GDB_FR_FPR5(sp)
-		SDC1	$6, GDB_FR_FPR6(sp)
-		SDC1	$7, GDB_FR_FPR7(sp)
-		SDC1	$8, GDB_FR_FPR8(sp)
-		SDC1	$9, GDB_FR_FPR9(sp)
-		SDC1	$10, GDB_FR_FPR10(sp)
-		SDC1	$11, GDB_FR_FPR11(sp)
-		SDC1	$12, GDB_FR_FPR12(sp)
-		SDC1	$13, GDB_FR_FPR13(sp)
-		SDC1	$14, GDB_FR_FPR14(sp)
-		SDC1	$15, GDB_FR_FPR15(sp)
-		SDC1	$16, GDB_FR_FPR16(sp)
-		SDC1	$17, GDB_FR_FPR17(sp)
-		SDC1	$18, GDB_FR_FPR18(sp)
-		SDC1	$19, GDB_FR_FPR19(sp)
-		SDC1	$20, GDB_FR_FPR20(sp)
-		SDC1	$21, GDB_FR_FPR21(sp)
-		SDC1	$22, GDB_FR_FPR22(sp)
-		SDC1	$23, GDB_FR_FPR23(sp)
-		SDC1	$24, GDB_FR_FPR24(sp)
-		SDC1	$25, GDB_FR_FPR25(sp)
-		SDC1	$26, GDB_FR_FPR26(sp)
-		SDC1	$27, GDB_FR_FPR27(sp)
-		SDC1	$28, GDB_FR_FPR28(sp)
-		SDC1	$29, GDB_FR_FPR29(sp)
-		SDC1	$30, GDB_FR_FPR30(sp)
-		SDC1	$31, GDB_FR_FPR31(sp)
-
-/*
- * FPU control registers
- */
-
-		cfc1	v0, CP1_STATUS
-		LONG_S	v0, GDB_FR_FSR(sp)
-		cfc1	v0, CP1_REVISION
-		LONG_S	v0, GDB_FR_FIR(sp)
-
-/*
- * Current stack frame ptr
- */
-
-2:
-		LONG_S	sp, GDB_FR_FRP(sp)
-
-/*
- * CP0 registers (R4000/R4400 unused registers skipped)
- */
-
-		mfc0	v0, CP0_INDEX
-		LONG_S	v0, GDB_FR_CP0_INDEX(sp)
-		mfc0	v0, CP0_RANDOM
-		LONG_S	v0, GDB_FR_CP0_RANDOM(sp)
-		DMFC0	v0, CP0_ENTRYLO0
-		LONG_S	v0, GDB_FR_CP0_ENTRYLO0(sp)
-		DMFC0	v0, CP0_ENTRYLO1
-		LONG_S	v0, GDB_FR_CP0_ENTRYLO1(sp)
-		DMFC0	v0, CP0_CONTEXT
-		LONG_S	v0, GDB_FR_CP0_CONTEXT(sp)
-		mfc0	v0, CP0_PAGEMASK
-		LONG_S	v0, GDB_FR_CP0_PAGEMASK(sp)
-		mfc0	v0, CP0_WIRED
-		LONG_S	v0, GDB_FR_CP0_WIRED(sp)
-		DMFC0	v0, CP0_ENTRYHI
-		LONG_S	v0, GDB_FR_CP0_ENTRYHI(sp)
-		mfc0	v0, CP0_PRID
-		LONG_S	v0, GDB_FR_CP0_PRID(sp)
-
-		.set	at
-
-/*
- * Continue with the higher level handler
- */
-
-		move	a0,sp
-
-		jal	handle_exception
-		 nop
-
-/*
- * Restore all writable registers, in reverse order
- */
-
-		.set	noat
-
-		LONG_L	v0, GDB_FR_CP0_ENTRYHI(sp)
-		LONG_L	v1, GDB_FR_CP0_WIRED(sp)
-		DMTC0	v0, CP0_ENTRYHI
-		mtc0	v1, CP0_WIRED
-		LONG_L	v0, GDB_FR_CP0_PAGEMASK(sp)
-		LONG_L	v1, GDB_FR_CP0_ENTRYLO1(sp)
-		mtc0	v0, CP0_PAGEMASK
-		DMTC0	v1, CP0_ENTRYLO1
-		LONG_L	v0, GDB_FR_CP0_ENTRYLO0(sp)
-		LONG_L	v1, GDB_FR_CP0_INDEX(sp)
-		DMTC0	v0, CP0_ENTRYLO0
-		LONG_L	v0, GDB_FR_CP0_CONTEXT(sp)
-		mtc0	v1, CP0_INDEX
-		DMTC0	v0, CP0_CONTEXT
-
-
-/*
- * Next, the floating point registers
- */
-		mfc0	v0, CP0_STATUS		/* check if the FPU is enabled */
-		srl	v0, v0, 16
-		andi	v0, v0, (ST0_CU1 >> 16)
-
-		beqz	v0, 3f			/* disabled, skip */
-		 nop
-
-		LDC1	$31, GDB_FR_FPR31(sp)
-		LDC1	$30, GDB_FR_FPR30(sp)
-		LDC1	$29, GDB_FR_FPR29(sp)
-		LDC1	$28, GDB_FR_FPR28(sp)
-		LDC1	$27, GDB_FR_FPR27(sp)
-		LDC1	$26, GDB_FR_FPR26(sp)
-		LDC1	$25, GDB_FR_FPR25(sp)
-		LDC1	$24, GDB_FR_FPR24(sp)
-		LDC1	$23, GDB_FR_FPR23(sp)
-		LDC1	$22, GDB_FR_FPR22(sp)
-		LDC1	$21, GDB_FR_FPR21(sp)
-		LDC1	$20, GDB_FR_FPR20(sp)
-		LDC1	$19, GDB_FR_FPR19(sp)
-		LDC1	$18, GDB_FR_FPR18(sp)
-		LDC1	$17, GDB_FR_FPR17(sp)
-		LDC1	$16, GDB_FR_FPR16(sp)
-		LDC1	$15, GDB_FR_FPR15(sp)
-		LDC1	$14, GDB_FR_FPR14(sp)
-		LDC1	$13, GDB_FR_FPR13(sp)
-		LDC1	$12, GDB_FR_FPR12(sp)
-		LDC1	$11, GDB_FR_FPR11(sp)
-		LDC1	$10, GDB_FR_FPR10(sp)
-		LDC1	$9, GDB_FR_FPR9(sp)
-		LDC1	$8, GDB_FR_FPR8(sp)
-		LDC1	$7, GDB_FR_FPR7(sp)
-		LDC1	$6, GDB_FR_FPR6(sp)
-		LDC1	$5, GDB_FR_FPR5(sp)
-		LDC1	$4, GDB_FR_FPR4(sp)
-		LDC1	$3, GDB_FR_FPR3(sp)
-		LDC1	$2, GDB_FR_FPR2(sp)
-		LDC1	$1, GDB_FR_FPR1(sp)
-		LDC1	$0, GDB_FR_FPR0(sp)
-
-/*
- * Now the CP0 and integer registers
- */
-
-3:
-#ifdef CONFIG_MIPS_MT_SMTC
-		/* Read-modify write of Status must be atomic */
-		mfc0	t2, CP0_TCSTATUS
-		ori	t1, t2, TCSTATUS_IXMT
-		mtc0	t1, CP0_TCSTATUS
-		andi	t2, t2, TCSTATUS_IXMT
-		_ehb
-		DMT	9				# dmt	t1
-		jal	mips_ihb
-		nop
-#endif /* CONFIG_MIPS_MT_SMTC */
-		mfc0	t0, CP0_STATUS
-		ori	t0, 0x1f
-		xori	t0, 0x1f
-		mtc0	t0, CP0_STATUS
-#ifdef CONFIG_MIPS_MT_SMTC
-        	andi    t1, t1, VPECONTROL_TE
-        	beqz    t1, 9f
-		nop
-        	EMT					# emt
-9:
-		mfc0	t1, CP0_TCSTATUS
-		xori	t1, t1, TCSTATUS_IXMT
-		or	t1, t1, t2
-		mtc0	t1, CP0_TCSTATUS
-		_ehb
-#endif /* CONFIG_MIPS_MT_SMTC */
-		LONG_L	v0, GDB_FR_STATUS(sp)
-		LONG_L	v1, GDB_FR_EPC(sp)
-		mtc0	v0, CP0_STATUS
-		DMTC0	v1, CP0_EPC
-		LONG_L	v0, GDB_FR_HI(sp)
-		LONG_L	v1, GDB_FR_LO(sp)
-		mthi	v0
-		mtlo	v1
-		LONG_L	$31, GDB_FR_REG31(sp)
-		LONG_L	$30, GDB_FR_REG30(sp)
-		LONG_L	$28, GDB_FR_REG28(sp)
-		LONG_L	$27, GDB_FR_REG27(sp)
-		LONG_L	$26, GDB_FR_REG26(sp)
-		LONG_L	$25, GDB_FR_REG25(sp)
-		LONG_L	$24, GDB_FR_REG24(sp)
-		LONG_L	$23, GDB_FR_REG23(sp)
-		LONG_L	$22, GDB_FR_REG22(sp)
-		LONG_L	$21, GDB_FR_REG21(sp)
-		LONG_L	$20, GDB_FR_REG20(sp)
-		LONG_L	$19, GDB_FR_REG19(sp)
-		LONG_L	$18, GDB_FR_REG18(sp)
-		LONG_L	$17, GDB_FR_REG17(sp)
-		LONG_L	$16, GDB_FR_REG16(sp)
-		LONG_L	$15, GDB_FR_REG15(sp)
-		LONG_L	$14, GDB_FR_REG14(sp)
-		LONG_L	$13, GDB_FR_REG13(sp)
-		LONG_L	$12, GDB_FR_REG12(sp)
-		LONG_L	$11, GDB_FR_REG11(sp)
-		LONG_L	$10, GDB_FR_REG10(sp)
-		LONG_L	$9, GDB_FR_REG9(sp)
-		LONG_L	$8, GDB_FR_REG8(sp)
-		LONG_L	$7, GDB_FR_REG7(sp)
-		LONG_L	$6, GDB_FR_REG6(sp)
-		LONG_L	$5, GDB_FR_REG5(sp)
-		LONG_L	$4, GDB_FR_REG4(sp)
-		LONG_L	$3, GDB_FR_REG3(sp)
-		LONG_L	$2, GDB_FR_REG2(sp)
-		LONG_L	$1, GDB_FR_REG1(sp)
-#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
-		LONG_L	k0, GDB_FR_EPC(sp)
-		LONG_L	$29, GDB_FR_REG29(sp)		/* Deallocate stack */
-		jr	k0
-		rfe
-#else
-		LONG_L	sp, GDB_FR_REG29(sp)		/* Deallocate stack */
-
-		.set	mips3
-		eret
-		.set	mips0
-#endif
-		.set	at
-		.set	reorder
-		END(trap_low)
-
-LEAF(kgdb_read_byte)
-4:		lb	t0, (a0)
-		sb	t0, (a1)
-		li	v0, 0
-		jr	ra
-		.section __ex_table,"a"
-		PTR	4b, kgdbfault
-		.previous
-		END(kgdb_read_byte)
-
-LEAF(kgdb_write_byte)
-5:		sb	a0, (a1)
-		li	v0, 0
-		jr	ra
-		.section __ex_table,"a"
-		PTR	5b, kgdbfault
-		.previous
-		END(kgdb_write_byte)
-
-		.type	kgdbfault@function
-		.ent	kgdbfault
-
-kgdbfault:	li	v0, -EFAULT
-		jr	ra
-		.end	kgdbfault
diff --git a/arch/mips/kernel/gdb-stub.c b/arch/mips/kernel/gdb-stub.c
deleted file mode 100644
index 25f4eab8ea9c..000000000000
--- a/arch/mips/kernel/gdb-stub.c
+++ /dev/null
@@ -1,1155 +0,0 @@
-/*
- *  arch/mips/kernel/gdb-stub.c
- *
- *  Originally written by Glenn Engel, Lake Stevens Instrument Division
- *
- *  Contributed by HP Systems
- *
- *  Modified for SPARC by Stu Grossman, Cygnus Support.
- *
- *  Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
- *  Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
- *
- *  Copyright (C) 1995 Andreas Busse
- *
- *  Copyright (C) 2003 MontaVista Software Inc.
- *  Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- */
-
-/*
- *  To enable debugger support, two things need to happen.  One, a
- *  call to set_debug_traps() is necessary in order to allow any breakpoints
- *  or error conditions to be properly intercepted and reported to gdb.
- *  Two, a breakpoint needs to be generated to begin communication.  This
- *  is most easily accomplished by a call to breakpoint().  Breakpoint()
- *  simulates a breakpoint by executing a BREAK instruction.
- *
- *
- *    The following gdb commands are supported:
- *
- * command          function                               Return value
- *
- *    g             return the value of the CPU registers  hex data or ENN
- *    G             set the value of the CPU registers     OK or ENN
- *
- *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
- *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
- *
- *    c             Resume at current address              SNN   ( signal NN)
- *    cAA..AA       Continue at address AA..AA             SNN
- *
- *    s             Step one instruction                   SNN
- *    sAA..AA       Step one instruction from AA..AA       SNN
- *
- *    k             kill
- *
- *    ?             What was the last sigval ?             SNN   (signal NN)
- *
- *    bBB..BB	    Set baud rate to BB..BB		   OK or BNN, then sets
- *							   baud rate
- *
- * All commands and responses are sent with a packet which includes a
- * checksum.  A packet consists of
- *
- * $<packet info>#<checksum>.
- *
- * where
- * <packet info> :: <characters representing the command or response>
- * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
- *
- * When a packet is received, it is first acknowledged with either '+' or '-'.
- * '+' indicates a successful transfer.  '-' indicates a failed transfer.
- *
- * Example:
- *
- * Host:                  Reply:
- * $m0,10#2a               +$00010203040506070809101112131415#42
- *
- *
- *  ==============
- *  MORE EXAMPLES:
- *  ==============
- *
- *  For reference -- the following are the steps that one
- *  company took (RidgeRun Inc) to get remote gdb debugging
- *  going. In this scenario the host machine was a PC and the
- *  target platform was a Galileo EVB64120A MIPS evaluation
- *  board.
- *
- *  Step 1:
- *  First download gdb-5.0.tar.gz from the internet.
- *  and then build/install the package.
- *
- *  Example:
- *    $ tar zxf gdb-5.0.tar.gz
- *    $ cd gdb-5.0
- *    $ ./configure --target=mips-linux-elf
- *    $ make
- *    $ install
- *    $ which mips-linux-elf-gdb
- *    /usr/local/bin/mips-linux-elf-gdb
- *
- *  Step 2:
- *  Configure linux for remote debugging and build it.
- *
- *  Example:
- *    $ cd ~/linux
- *    $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging>
- *    $ make
- *
- *  Step 3:
- *  Download the kernel to the remote target and start
- *  the kernel running. It will promptly halt and wait
- *  for the host gdb session to connect. It does this
- *  since the "Kernel Hacking" option has defined
- *  CONFIG_KGDB which in turn enables your calls
- *  to:
- *     set_debug_traps();
- *     breakpoint();
- *
- *  Step 4:
- *  Start the gdb session on the host.
- *
- *  Example:
- *    $ mips-linux-elf-gdb vmlinux
- *    (gdb) set remotebaud 115200
- *    (gdb) target remote /dev/ttyS1
- *    ...at this point you are connected to
- *       the remote target and can use gdb
- *       in the normal fasion. Setting
- *       breakpoints, single stepping,
- *       printing variables, etc.
- */
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/reboot.h>
-
-#include <asm/asm.h>
-#include <asm/cacheflush.h>
-#include <asm/mipsregs.h>
-#include <asm/pgtable.h>
-#include <asm/system.h>
-#include <asm/gdb-stub.h>
-#include <asm/inst.h>
-
-/*
- * external low-level support routines
- */
-
-extern int putDebugChar(char c);    /* write a single character      */
-extern char getDebugChar(void);     /* read and return a single char */
-extern void trap_low(void);
-
-/*
- * breakpoint and test functions
- */
-extern void breakpoint(void);
-extern void breakinst(void);
-extern void async_breakpoint(void);
-extern void async_breakinst(void);
-extern void adel(void);
-
-/*
- * local prototypes
- */
-
-static void getpacket(char *buffer);
-static void putpacket(char *buffer);
-static int computeSignal(int tt);
-static int hex(unsigned char ch);
-static int hexToInt(char **ptr, int *intValue);
-static int hexToLong(char **ptr, long *longValue);
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault);
-void handle_exception(struct gdb_regs *regs);
-
-int kgdb_enabled;
-
-/*
- * spin locks for smp case
- */
-static DEFINE_SPINLOCK(kgdb_lock);
-static raw_spinlock_t kgdb_cpulock[NR_CPUS] = {
-	[0 ... NR_CPUS-1] = __RAW_SPIN_LOCK_UNLOCKED,
-};
-
-/*
- * BUFMAX defines the maximum number of characters in inbound/outbound buffers
- * at least NUMREGBYTES*2 are needed for register packets
- */
-#define BUFMAX 2048
-
-static char input_buffer[BUFMAX];
-static char output_buffer[BUFMAX];
-static int initialized;	/* !0 means we've been initialized */
-static int kgdb_started;
-static const char hexchars[]="0123456789abcdef";
-
-/* Used to prevent crashes in memory access.  Note that they'll crash anyway if
-   we haven't set up fault handlers yet... */
-int kgdb_read_byte(unsigned char *address, unsigned char *dest);
-int kgdb_write_byte(unsigned char val, unsigned char *dest);
-
-/*
- * Convert ch from a hex digit to an int
- */
-static int hex(unsigned char ch)
-{
-	if (ch >= 'a' && ch <= 'f')
-		return ch-'a'+10;
-	if (ch >= '0' && ch <= '9')
-		return ch-'0';
-	if (ch >= 'A' && ch <= 'F')
-		return ch-'A'+10;
-	return -1;
-}
-
-/*
- * scan for the sequence $<data>#<checksum>
- */
-static void getpacket(char *buffer)
-{
-	unsigned char checksum;
-	unsigned char xmitcsum;
-	int i;
-	int count;
-	unsigned char ch;
-
-	do {
-		/*
-		 * wait around for the start character,
-		 * ignore all other characters
-		 */
-		while ((ch = (getDebugChar() & 0x7f)) != '$') ;
-
-		checksum = 0;
-		xmitcsum = -1;
-		count = 0;
-
-		/*
-		 * now, read until a # or end of buffer is found
-		 */
-		while (count < BUFMAX) {
-			ch = getDebugChar();
-			if (ch == '#')
-				break;
-			checksum = checksum + ch;
-			buffer[count] = ch;
-			count = count + 1;
-		}
-
-		if (count >= BUFMAX)
-			continue;
-
-		buffer[count] = 0;
-
-		if (ch == '#') {
-			xmitcsum = hex(getDebugChar() & 0x7f) << 4;
-			xmitcsum |= hex(getDebugChar() & 0x7f);
-
-			if (checksum != xmitcsum)
-				putDebugChar('-');	/* failed checksum */
-			else {
-				putDebugChar('+'); /* successful transfer */
-
-				/*
-				 * if a sequence char is present,
-				 * reply the sequence ID
-				 */
-				if (buffer[2] == ':') {
-					putDebugChar(buffer[0]);
-					putDebugChar(buffer[1]);
-
-					/*
-					 * remove sequence chars from buffer
-					 */
-					count = strlen(buffer);
-					for (i=3; i <= count; i++)
-						buffer[i-3] = buffer[i];
-				}
-			}
-		}
-	}
-	while (checksum != xmitcsum);
-}
-
-/*
- * send the packet in buffer.
- */
-static void putpacket(char *buffer)
-{
-	unsigned char checksum;
-	int count;
-	unsigned char ch;
-
-	/*
-	 * $<packet info>#<checksum>.
-	 */
-
-	do {
-		putDebugChar('$');
-		checksum = 0;
-		count = 0;
-
-		while ((ch = buffer[count]) != 0) {
-			if (!(putDebugChar(ch)))
-				return;
-			checksum += ch;
-			count += 1;
-		}
-
-		putDebugChar('#');
-		putDebugChar(hexchars[checksum >> 4]);
-		putDebugChar(hexchars[checksum & 0xf]);
-
-	}
-	while ((getDebugChar() & 0x7f) != '+');
-}
-
-
-/*
- * Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null), in case of mem fault,
- * return 0.
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static unsigned char *mem2hex(char *mem, char *buf, int count, int may_fault)
-{
-	unsigned char ch;
-
-	while (count-- > 0) {
-		if (kgdb_read_byte(mem++, &ch) != 0)
-			return 0;
-		*buf++ = hexchars[ch >> 4];
-		*buf++ = hexchars[ch & 0xf];
-	}
-
-	*buf = 0;
-
-	return buf;
-}
-
-/*
- * convert the hex array pointed to by buf into binary to be placed in mem
- * return a pointer to the character AFTER the last byte written
- * may_fault is non-zero if we are reading from arbitrary memory, but is currently
- * not used.
- */
-static char *hex2mem(char *buf, char *mem, int count, int binary, int may_fault)
-{
-	int i;
-	unsigned char ch;
-
-	for (i=0; i<count; i++)
-	{
-		if (binary) {
-			ch = *buf++;
-			if (ch == 0x7d)
-				ch = 0x20 ^ *buf++;
-		}
-		else {
-			ch = hex(*buf++) << 4;
-			ch |= hex(*buf++);
-		}
-		if (kgdb_write_byte(ch, mem++) != 0)
-			return 0;
-	}
-
-	return mem;
-}
-
-/*
- * This table contains the mapping between SPARC hardware trap types, and
- * signals, which are primarily what GDB understands.  It also indicates
- * which hardware traps we need to commandeer when initializing the stub.
- */
-static struct hard_trap_info {
-	unsigned char tt;		/* Trap type code for MIPS R3xxx and R4xxx */
-	unsigned char signo;		/* Signal that we map this trap into */
-} hard_trap_info[] = {
-	{ 6, SIGBUS },			/* instruction bus error */
-	{ 7, SIGBUS },			/* data bus error */
-	{ 9, SIGTRAP },			/* break */
-	{ 10, SIGILL },			/* reserved instruction */
-/*	{ 11, SIGILL },		*/	/* CPU unusable */
-	{ 12, SIGFPE },			/* overflow */
-	{ 13, SIGTRAP },		/* trap */
-	{ 14, SIGSEGV },		/* virtual instruction cache coherency */
-	{ 15, SIGFPE },			/* floating point exception */
-	{ 23, SIGSEGV },		/* watch */
-	{ 31, SIGSEGV },		/* virtual data cache coherency */
-	{ 0, 0}				/* Must be last */
-};
-
-/* Save the normal trap handlers for user-mode traps. */
-void *saved_vectors[32];
-
-/*
- * Set up exception handlers for tracing and breakpoints
- */
-void set_debug_traps(void)
-{
-	struct hard_trap_info *ht;
-	unsigned long flags;
-	unsigned char c;
-
-	local_irq_save(flags);
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		saved_vectors[ht->tt] = set_except_vector(ht->tt, trap_low);
-
-	putDebugChar('+'); /* 'hello world' */
-	/*
-	 * In case GDB is started before us, ack any packets
-	 * (presumably "$?#xx") sitting there.
-	 */
-	while((c = getDebugChar()) != '$');
-	while((c = getDebugChar()) != '#');
-	c = getDebugChar(); /* eat first csum byte */
-	c = getDebugChar(); /* eat second csum byte */
-	putDebugChar('+'); /* ack it */
-
-	initialized = 1;
-	local_irq_restore(flags);
-}
-
-void restore_debug_traps(void)
-{
-	struct hard_trap_info *ht;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		set_except_vector(ht->tt, saved_vectors[ht->tt]);
-	local_irq_restore(flags);
-}
-
-/*
- * Convert the MIPS hardware trap type code to a Unix signal number.
- */
-static int computeSignal(int tt)
-{
-	struct hard_trap_info *ht;
-
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		if (ht->tt == tt)
-			return ht->signo;
-
-	return SIGHUP;		/* default for things we don't know about */
-}
-
-/*
- * While we find nice hex chars, build an int.
- * Return number of chars processed.
- */
-static int hexToInt(char **ptr, int *intValue)
-{
-	int numChars = 0;
-	int hexValue;
-
-	*intValue = 0;
-
-	while (**ptr) {
-		hexValue = hex(**ptr);
-		if (hexValue < 0)
-			break;
-
-		*intValue = (*intValue << 4) | hexValue;
-		numChars ++;
-
-		(*ptr)++;
-	}
-
-	return (numChars);
-}
-
-static int hexToLong(char **ptr, long *longValue)
-{
-	int numChars = 0;
-	int hexValue;
-
-	*longValue = 0;
-
-	while (**ptr) {
-		hexValue = hex(**ptr);
-		if (hexValue < 0)
-			break;
-
-		*longValue = (*longValue << 4) | hexValue;
-		numChars ++;
-
-		(*ptr)++;
-	}
-
-	return numChars;
-}
-
-
-#if 0
-/*
- * Print registers (on target console)
- * Used only to debug the stub...
- */
-void show_gdbregs(struct gdb_regs * regs)
-{
-	/*
-	 * Saved main processor registers
-	 */
-	printk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg0, regs->reg1, regs->reg2, regs->reg3,
-	       regs->reg4, regs->reg5, regs->reg6, regs->reg7);
-	printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg8, regs->reg9, regs->reg10, regs->reg11,
-	       regs->reg12, regs->reg13, regs->reg14, regs->reg15);
-	printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg16, regs->reg17, regs->reg18, regs->reg19,
-	       regs->reg20, regs->reg21, regs->reg22, regs->reg23);
-	printk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
-	       regs->reg24, regs->reg25, regs->reg26, regs->reg27,
-	       regs->reg28, regs->reg29, regs->reg30, regs->reg31);
-
-	/*
-	 * Saved cp0 registers
-	 */
-	printk("epc  : %08lx\nStatus: %08lx\nCause : %08lx\n",
-	       regs->cp0_epc, regs->cp0_status, regs->cp0_cause);
-}
-#endif /* dead code */
-
-/*
- * We single-step by setting breakpoints. When an exception
- * is handled, we need to restore the instructions hoisted
- * when the breakpoints were set.
- *
- * This is where we save the original instructions.
- */
-static struct gdb_bp_save {
-	unsigned long addr;
-	unsigned int val;
-} step_bp[2];
-
-#define BP 0x0000000d  /* break opcode */
-
-/*
- * Set breakpoint instructions for single stepping.
- */
-static void single_step(struct gdb_regs *regs)
-{
-	union mips_instruction insn;
-	unsigned long targ;
-	int is_branch, is_cond, i;
-
-	targ = regs->cp0_epc;
-	insn.word = *(unsigned int *)targ;
-	is_branch = is_cond = 0;
-
-	switch (insn.i_format.opcode) {
-	/*
-	 * jr and jalr are in r_format format.
-	 */
-	case spec_op:
-		switch (insn.r_format.func) {
-		case jalr_op:
-		case jr_op:
-			targ = *(&regs->reg0 + insn.r_format.rs);
-			is_branch = 1;
-			break;
-		}
-		break;
-
-	/*
-	 * This group contains:
-	 * bltz_op, bgez_op, bltzl_op, bgezl_op,
-	 * bltzal_op, bgezal_op, bltzall_op, bgezall_op.
-	 */
-	case bcond_op:
-		is_branch = is_cond = 1;
-		targ += 4 + (insn.i_format.simmediate << 2);
-		break;
-
-	/*
-	 * These are unconditional and in j_format.
-	 */
-	case jal_op:
-	case j_op:
-		is_branch = 1;
-		targ += 4;
-		targ >>= 28;
-		targ <<= 28;
-		targ |= (insn.j_format.target << 2);
-		break;
-
-	/*
-	 * These are conditional.
-	 */
-	case beq_op:
-	case beql_op:
-	case bne_op:
-	case bnel_op:
-	case blez_op:
-	case blezl_op:
-	case bgtz_op:
-	case bgtzl_op:
-	case cop0_op:
-	case cop1_op:
-	case cop2_op:
-	case cop1x_op:
-		is_branch = is_cond = 1;
-		targ += 4 + (insn.i_format.simmediate << 2);
-		break;
-	}
-
-	if (is_branch) {
-		i = 0;
-		if (is_cond && targ != (regs->cp0_epc + 8)) {
-			step_bp[i].addr = regs->cp0_epc + 8;
-			step_bp[i++].val = *(unsigned *)(regs->cp0_epc + 8);
-			*(unsigned *)(regs->cp0_epc + 8) = BP;
-		}
-		step_bp[i].addr = targ;
-		step_bp[i].val  = *(unsigned *)targ;
-		*(unsigned *)targ = BP;
-	} else {
-		step_bp[0].addr = regs->cp0_epc + 4;
-		step_bp[0].val  = *(unsigned *)(regs->cp0_epc + 4);
-		*(unsigned *)(regs->cp0_epc + 4) = BP;
-	}
-}
-
-/*
- *  If asynchronously interrupted by gdb, then we need to set a breakpoint
- *  at the interrupted instruction so that we wind up stopped with a
- *  reasonable stack frame.
- */
-static struct gdb_bp_save async_bp;
-
-/*
- * Swap the interrupted EPC with our asynchronous breakpoint routine.
- * This is safer than stuffing the breakpoint in-place, since no cache
- * flushes (or resulting smp_call_functions) are required.  The
- * assumption is that only one CPU will be handling asynchronous bp's,
- * and only one can be active at a time.
- */
-extern spinlock_t smp_call_lock;
-
-void set_async_breakpoint(unsigned long *epc)
-{
-	/* skip breaking into userland */
-	if ((*epc & 0x80000000) == 0)
-		return;
-
-#ifdef CONFIG_SMP
-	/* avoid deadlock if someone is make IPC */
-	if (spin_is_locked(&smp_call_lock))
-		return;
-#endif
-
-	async_bp.addr = *epc;
-	*epc = (unsigned long)async_breakpoint;
-}
-
-#ifdef CONFIG_SMP
-static void kgdb_wait(void *arg)
-{
-	unsigned flags;
-	int cpu = smp_processor_id();
-
-	local_irq_save(flags);
-
-	__raw_spin_lock(&kgdb_cpulock[cpu]);
-	__raw_spin_unlock(&kgdb_cpulock[cpu]);
-
-	local_irq_restore(flags);
-}
-#endif
-
-/*
- * GDB stub needs to call kgdb_wait on all processor with interrupts
- * disabled, so it uses it's own special variant.
- */
-static int kgdb_smp_call_kgdb_wait(void)
-{
-#ifdef CONFIG_SMP
-	cpumask_t mask = cpu_online_map;
-	struct call_data_struct data;
-	int cpu = smp_processor_id();
-	int cpus;
-
-	/*
-	 * Can die spectacularly if this CPU isn't yet marked online
-	 */
-	BUG_ON(!cpu_online(cpu));
-
-	cpu_clear(cpu, mask);
-	cpus = cpus_weight(mask);
-	if (!cpus)
-		return 0;
-
-	if (spin_is_locked(&smp_call_lock)) {
-		/*
-		 * Some other processor is trying to make us do something
-		 * but we're not going to respond... give up
-		 */
-		return -1;
-		}
-
-	/*
-	 * We will continue here, accepting the fact that
-	 * the kernel may deadlock if another CPU attempts
-	 * to call smp_call_function now...
-	 */
-
-	data.func = kgdb_wait;
-	data.info = NULL;
-	atomic_set(&data.started, 0);
-	data.wait = 0;
-
-	spin_lock(&smp_call_lock);
-	call_data = &data;
-	mb();
-
-	core_send_ipi_mask(mask, SMP_CALL_FUNCTION);
-
-	/* Wait for response */
-	/* FIXME: lock-up detection, backtrace on lock-up */
-	while (atomic_read(&data.started) != cpus)
-		barrier();
-
-	call_data = NULL;
-	spin_unlock(&smp_call_lock);
-#endif
-
-	return 0;
-}
-
-/*
- * This function does all command processing for interfacing to gdb.  It
- * returns 1 if you should skip the instruction at the trap address, 0
- * otherwise.
- */
-void handle_exception(struct gdb_regs *regs)
-{
-	int trap;			/* Trap type */
-	int sigval;
-	long addr;
-	int length;
-	char *ptr;
-	unsigned long *stack;
-	int i;
-	int bflag = 0;
-
-	kgdb_started = 1;
-
-	/*
-	 * acquire the big kgdb spinlock
-	 */
-	if (!spin_trylock(&kgdb_lock)) {
-		/*
-		 * some other CPU has the lock, we should go back to
-		 * receive the gdb_wait IPC
-		 */
-		return;
-	}
-
-	/*
-	 * If we're in async_breakpoint(), restore the real EPC from
-	 * the breakpoint.
-	 */
-	if (regs->cp0_epc == (unsigned long)async_breakinst) {
-		regs->cp0_epc = async_bp.addr;
-		async_bp.addr = 0;
-	}
-
-	/*
-	 * acquire the CPU spinlocks
-	 */
-	for_each_online_cpu(i)
-		if (__raw_spin_trylock(&kgdb_cpulock[i]) == 0)
-			panic("kgdb: couldn't get cpulock %d\n", i);
-
-	/*
-	 * force other cpus to enter kgdb
-	 */
-	kgdb_smp_call_kgdb_wait();
-
-	/*
-	 * If we're in breakpoint() increment the PC
-	 */
-	trap = (regs->cp0_cause & 0x7c) >> 2;
-	if (trap == 9 && regs->cp0_epc == (unsigned long)breakinst)
-		regs->cp0_epc += 4;
-
-	/*
-	 * If we were single_stepping, restore the opcodes hoisted
-	 * for the breakpoint[s].
-	 */
-	if (step_bp[0].addr) {
-		*(unsigned *)step_bp[0].addr = step_bp[0].val;
-		step_bp[0].addr = 0;
-
-		if (step_bp[1].addr) {
-			*(unsigned *)step_bp[1].addr = step_bp[1].val;
-			step_bp[1].addr = 0;
-		}
-	}
-
-	stack = (long *)regs->reg29;			/* stack ptr */
-	sigval = computeSignal(trap);
-
-	/*
-	 * reply to host that an exception has occurred
-	 */
-	ptr = output_buffer;
-
-	/*
-	 * Send trap type (converted to signal)
-	 */
-	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
-
-	/*
-	 * Send Error PC
-	 */
-	*ptr++ = hexchars[REG_EPC >> 4];
-	*ptr++ = hexchars[REG_EPC & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->cp0_epc, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	/*
-	 * Send frame pointer
-	 */
-	*ptr++ = hexchars[REG_FP >> 4];
-	*ptr++ = hexchars[REG_FP & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->reg30, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	/*
-	 * Send stack pointer
-	 */
-	*ptr++ = hexchars[REG_SP >> 4];
-	*ptr++ = hexchars[REG_SP & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->reg29, ptr, sizeof(long), 0);
-	*ptr++ = ';';
-
-	*ptr++ = 0;
-	putpacket(output_buffer);	/* send it off... */
-
-	/*
-	 * Wait for input from remote GDB
-	 */
-	while (1) {
-		output_buffer[0] = 0;
-		getpacket(input_buffer);
-
-		switch (input_buffer[0])
-		{
-		case '?':
-			output_buffer[0] = 'S';
-			output_buffer[1] = hexchars[sigval >> 4];
-			output_buffer[2] = hexchars[sigval & 0xf];
-			output_buffer[3] = 0;
-			break;
-
-		/*
-		 * Detach debugger; let CPU run
-		 */
-		case 'D':
-			putpacket(output_buffer);
-			goto finish_kgdb;
-			break;
-
-		case 'd':
-			/* toggle debug flag */
-			break;
-
-		/*
-		 * Return the value of the CPU registers
-		 */
-		case 'g':
-			ptr = output_buffer;
-			ptr = mem2hex((char *)&regs->reg0, ptr, 32*sizeof(long), 0); /* r0...r31 */
-			ptr = mem2hex((char *)&regs->cp0_status, ptr, 6*sizeof(long), 0); /* cp0 */
-			ptr = mem2hex((char *)&regs->fpr0, ptr, 32*sizeof(long), 0); /* f0...31 */
-			ptr = mem2hex((char *)&regs->cp1_fsr, ptr, 2*sizeof(long), 0); /* cp1 */
-			ptr = mem2hex((char *)&regs->frame_ptr, ptr, 2*sizeof(long), 0); /* frp */
-			ptr = mem2hex((char *)&regs->cp0_index, ptr, 16*sizeof(long), 0); /* cp0 */
-			break;
-
-		/*
-		 * set the value of the CPU registers - return OK
-		 */
-		case 'G':
-		{
-			ptr = &input_buffer[1];
-			hex2mem(ptr, (char *)&regs->reg0, 32*sizeof(long), 0, 0);
-			ptr += 32*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp0_status, 6*sizeof(long), 0, 0);
-			ptr += 6*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->fpr0, 32*sizeof(long), 0, 0);
-			ptr += 32*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp1_fsr, 2*sizeof(long), 0, 0);
-			ptr += 2*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->frame_ptr, 2*sizeof(long), 0, 0);
-			ptr += 2*(2*sizeof(long));
-			hex2mem(ptr, (char *)&regs->cp0_index, 16*sizeof(long), 0, 0);
-			strcpy(output_buffer, "OK");
-		 }
-		break;
-
-		/*
-		 * mAA..AA,LLLL  Read LLLL bytes at address AA..AA
-		 */
-		case 'm':
-			ptr = &input_buffer[1];
-
-			if (hexToLong(&ptr, &addr)
-				&& *ptr++ == ','
-				&& hexToInt(&ptr, &length)) {
-				if (mem2hex((char *)addr, output_buffer, length, 1))
-					break;
-				strcpy(output_buffer, "E03");
-			} else
-				strcpy(output_buffer, "E01");
-			break;
-
-		/*
-		 * XAA..AA,LLLL: Write LLLL escaped binary bytes at address AA.AA
-		 */
-		case 'X':
-			bflag = 1;
-			/* fall through */
-
-		/*
-		 * MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK
-		 */
-		case 'M':
-			ptr = &input_buffer[1];
-
-			if (hexToLong(&ptr, &addr)
-				&& *ptr++ == ','
-				&& hexToInt(&ptr, &length)
-				&& *ptr++ == ':') {
-				if (hex2mem(ptr, (char *)addr, length, bflag, 1))
-					strcpy(output_buffer, "OK");
-				else
-					strcpy(output_buffer, "E03");
-			}
-			else
-				strcpy(output_buffer, "E02");
-			break;
-
-		/*
-		 * cAA..AA    Continue at address AA..AA(optional)
-		 */
-		case 'c':
-			/* try to read optional parameter, pc unchanged if no parm */
-
-			ptr = &input_buffer[1];
-			if (hexToLong(&ptr, &addr))
-				regs->cp0_epc = addr;
-
-			goto exit_kgdb_exception;
-			break;
-
-		/*
-		 * kill the program; let us try to restart the machine
-		 * Reset the whole machine.
-		 */
-		case 'k':
-		case 'r':
-			machine_restart("kgdb restarts machine");
-			break;
-
-		/*
-		 * Step to next instruction
-		 */
-		case 's':
-			/*
-			 * There is no single step insn in the MIPS ISA, so we
-			 * use breakpoints and continue, instead.
-			 */
-			single_step(regs);
-			goto exit_kgdb_exception;
-			/* NOTREACHED */
-			break;
-
-		/*
-		 * Set baud rate (bBB)
-		 * FIXME: Needs to be written
-		 */
-		case 'b':
-		{
-#if 0
-			int baudrate;
-			extern void set_timer_3();
-
-			ptr = &input_buffer[1];
-			if (!hexToInt(&ptr, &baudrate))
-			{
-				strcpy(output_buffer, "B01");
-				break;
-			}
-
-			/* Convert baud rate to uart clock divider */
-
-			switch (baudrate)
-			{
-				case 38400:
-					baudrate = 16;
-					break;
-				case 19200:
-					baudrate = 33;
-					break;
-				case 9600:
-					baudrate = 65;
-					break;
-				default:
-					baudrate = 0;
-					strcpy(output_buffer, "B02");
-					goto x1;
-			}
-
-			if (baudrate) {
-				putpacket("OK");	/* Ack before changing speed */
-				set_timer_3(baudrate); /* Set it */
-			}
-#endif
-		}
-		break;
-
-		}			/* switch */
-
-		/*
-		 * reply to the request
-		 */
-
-		putpacket(output_buffer);
-
-	} /* while */
-
-	return;
-
-finish_kgdb:
-	restore_debug_traps();
-
-exit_kgdb_exception:
-	/* release locks so other CPUs can go */
-	for_each_online_cpu(i)
-		__raw_spin_unlock(&kgdb_cpulock[i]);
-	spin_unlock(&kgdb_lock);
-
-	__flush_cache_all();
-	return;
-}
-
-/*
- * This function will generate a breakpoint exception.  It is used at the
- * beginning of a program to sync up with a debugger and can be used
- * otherwise as a quick means to stop program execution and "break" into
- * the debugger.
- */
-void breakpoint(void)
-{
-	if (!initialized)
-		return;
-
-	__asm__ __volatile__(
-			".globl	breakinst\n\t"
-			".set\tnoreorder\n\t"
-			"nop\n"
-			"breakinst:\tbreak\n\t"
-			"nop\n\t"
-			".set\treorder"
-			);
-}
-
-/* Nothing but the break; don't pollute any registers */
-void async_breakpoint(void)
-{
-	__asm__ __volatile__(
-			".globl	async_breakinst\n\t"
-			".set\tnoreorder\n\t"
-			"nop\n"
-			"async_breakinst:\tbreak\n\t"
-			"nop\n\t"
-			".set\treorder"
-			);
-}
-
-void adel(void)
-{
-	__asm__ __volatile__(
-			".globl\tadel\n\t"
-			"lui\t$8,0x8000\n\t"
-			"lw\t$9,1($8)\n\t"
-			);
-}
-
-/*
- * malloc is needed by gdb client in "call func()", even a private one
- * will make gdb happy
- */
-static void __used *malloc(size_t size)
-{
-	return kmalloc(size, GFP_ATOMIC);
-}
-
-static void __used free(void *where)
-{
-	kfree(where);
-}
-
-#ifdef CONFIG_GDB_CONSOLE
-
-void gdb_putsn(const char *str, int l)
-{
-	char outbuf[18];
-
-	if (!kgdb_started)
-		return;
-
-	outbuf[0]='O';
-
-	while(l) {
-		int i = (l>8)?8:l;
-		mem2hex((char *)str, &outbuf[1], i, 0);
-		outbuf[(i*2)+1]=0;
-		putpacket(outbuf);
-		str += i;
-		l -= i;
-	}
-}
-
-static void gdb_console_write(struct console *con, const char *s, unsigned n)
-{
-	gdb_putsn(s, n);
-}
-
-static struct console gdb_console = {
-	.name	= "gdb",
-	.write	= gdb_console_write,
-	.flags	= CON_PRINTBUFFER,
-	.index	= -1
-};
-
-static int __init register_gdb_console(void)
-{
-	register_console(&gdb_console);
-
-	return 0;
-}
-
-console_initcall(register_gdb_console);
-
-#endif
diff --git a/arch/mips/kernel/gpio_txx9.c b/arch/mips/kernel/gpio_txx9.c
index b1436a857998..c6854d9df926 100644
--- a/arch/mips/kernel/gpio_txx9.c
+++ b/arch/mips/kernel/gpio_txx9.c
@@ -47,23 +47,25 @@ static void txx9_gpio_set(struct gpio_chip *chip, unsigned int offset,
 
 static int txx9_gpio_dir_in(struct gpio_chip *chip, unsigned int offset)
 {
-	spin_lock_irq(&txx9_gpio_lock);
+	unsigned long flags;
+	spin_lock_irqsave(&txx9_gpio_lock, flags);
 	__raw_writel(__raw_readl(&txx9_pioptr->dir) & ~(1 << offset),
 		     &txx9_pioptr->dir);
 	mmiowb();
-	spin_unlock_irq(&txx9_gpio_lock);
+	spin_unlock_irqrestore(&txx9_gpio_lock, flags);
 	return 0;
 }
 
 static int txx9_gpio_dir_out(struct gpio_chip *chip, unsigned int offset,
 			     int value)
 {
-	spin_lock_irq(&txx9_gpio_lock);
+	unsigned long flags;
+	spin_lock_irqsave(&txx9_gpio_lock, flags);
 	txx9_gpio_set_raw(offset, value);
 	__raw_writel(__raw_readl(&txx9_pioptr->dir) | (1 << offset),
 		     &txx9_pioptr->dir);
 	mmiowb();
-	spin_unlock_irq(&txx9_gpio_lock);
+	spin_unlock_irqrestore(&txx9_gpio_lock, flags);
 	return 0;
 }
 
diff --git a/arch/mips/kernel/i8253.c b/arch/mips/kernel/i8253.c
index 38fa1a194bf4..b6ac55162b9a 100644
--- a/arch/mips/kernel/i8253.c
+++ b/arch/mips/kernel/i8253.c
@@ -80,7 +80,7 @@ static int pit_next_event(unsigned long delta, struct clock_event_device *evt)
  * registered. This mechanism replaces the previous #ifdef LOCAL_APIC -
  * !using_apic_timer decisions in do_timer_interrupt_hook()
  */
-struct clock_event_device pit_clockevent = {
+static struct clock_event_device pit_clockevent = {
 	.name		= "pit",
 	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode	= init_pit_timer,
diff --git a/arch/mips/kernel/irix5sys.S b/arch/mips/kernel/irix5sys.S
deleted file mode 100644
index eeef891093ed..000000000000
--- a/arch/mips/kernel/irix5sys.S
+++ /dev/null
@@ -1,1041 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * 32-bit IRIX5 ABI system call table derived from original file 'irix5sys.h'
- * created by David S. Miller.
- *
- * Copyright (C) 1996 - 2004 David S. Miller <dm@engr.sgi.com>
- * Copyright (C) 2004 Steven J. Hill <sjhill@realitydiluted.com>
- */
-#include <asm/asm.h>
-
-	/*
-	 * Key:
-	 *         V == Valid and should work as expected for most cases.
-	 *        HV == Half Valid, some things will work, some likely will not
-	 *        IV == InValid, certainly will not work at all yet
-	 *        ?V == ?'ably Valid, I have not done enough looking into it
-	 *        DC == Don't Care, a rats ass we couldn't give
-	 */
-
-	.macro	irix5syscalltable
-
-	sys	sys_syscall	0	/* 1000  sysindir()	       V*/
-	sys	sys_exit	1	/* 1001  exit()		       V*/
-	sys	sys_fork	0	/* 1002  fork()		       V*/
-	sys	sys_read	3	/* 1003  read()		       V*/
-	sys	sys_write	3	/* 1004  write()	       V*/
-	sys	sys_open	3	/* 1005  open()		       V*/
-	sys	sys_close	1	/* 1006  close()	       V*/
-	sys	irix_unimp	0	/* 1007  (XXX IRIX 4 wait)     V*/
-	sys	sys_creat	2	/* 1008  creat()	       V*/
-	sys	sys_link	2	/* 1009  link()		       V*/
-	sys	sys_unlink	1	/* 1010  unlink()	       V*/
-	sys	irix_exec	0	/* 1011  exec()		       V*/
-	sys	sys_chdir	1	/* 1012  chdir()	       V*/
-	sys	irix_gtime	0	/* 1013  time()		       V*/
-	sys	irix_unimp	0	/* 1014  (XXX IRIX 4 mknod)    V*/
-	sys	sys_chmod	2	/* 1015  chmod()	       V*/
-	sys	sys_chown	3	/* 1016  chown()	       V*/
-	sys	irix_brk	1	/* 1017  break()	       V*/
-	sys	irix_unimp	0	/* 1018  (XXX IRIX 4 stat)     V*/
-	sys	sys_lseek	3	/* 1019  lseek()     XXX64bit HV*/
-	sys	irix_getpid	0	/* 1020  getpid()	       V*/
-	sys	irix_mount	6	/* 1021  mount()	      IV*/
-	sys	sys_umount	1	/* 1022  umount()	       V*/
-	sys	sys_setuid	1	/* 1023  setuid()	       V*/
-	sys	irix_getuid	0	/* 1024  getuid()	       V*/
-	sys	irix_stime	1	/* 1025  stime()	       V*/
-	sys	irix_unimp	4	/* 1026  XXX ptrace()	      IV*/
-	sys	irix_alarm	1	/* 1027  alarm()	       V*/
-	sys	irix_unimp	0	/* 1028  (XXX IRIX 4 fstat)    V*/
-	sys	irix_pause	0	/* 1029  pause()	       V*/
-	sys	sys_utime	2	/* 1030  utime()	       V*/
-	sys	irix_unimp	0	/* 1031  nuthin'	       V*/
-	sys	irix_unimp	0	/* 1032  nobody home man...    V*/
-	sys	sys_access	2	/* 1033  access()	       V*/
-	sys	sys_nice	1	/* 1034  nice()		       V*/
-	sys	irix_statfs	2	/* 1035  statfs()	       V*/
-	sys	sys_sync	0	/* 1036  sync()		       V*/
-	sys	sys_kill	2	/* 1037  kill()		       V*/
-	sys	irix_fstatfs	2	/* 1038  fstatfs()	       V*/
-	sys	irix_setpgrp	1	/* 1039  setpgrp()	       V*/
-	sys	irix_syssgi	0	/* 1040  syssgi()	      HV*/
-	sys	sys_dup		1	/* 1041  dup()		       V*/
-	sys	sys_pipe	0	/* 1042  pipe()		       V*/
-	sys	irix_times	1	/* 1043  times()	       V*/
-	sys	irix_unimp	0	/* 1044  XXX profil()	      IV*/
-	sys	irix_unimp	0	/* 1045  XXX lock()	      IV*/
-	sys	sys_setgid	1	/* 1046  setgid()	       V*/
-	sys	irix_getgid	0	/* 1047  getgid()	       V*/
-	sys	irix_unimp	0	/* 1048  (XXX IRIX 4 ssig)     V*/
-	sys	irix_msgsys	6	/* 1049  sys_msgsys	       V*/
-	sys	sys_sysmips	4	/* 1050  sysmips()	      HV*/
-	sys	irix_unimp	0	/* 1051	 XXX sysacct()	      IV*/
-	sys	irix_shmsys	5	/* 1052  sys_shmsys	       V*/
-	sys	irix_semsys	0	/* 1053  sys_semsys	       V*/
-	sys	irix_ioctl	3	/* 1054  ioctl()	      HV*/
-	sys	irix_uadmin	0	/* 1055  XXX sys_uadmin()     HC*/
-	sys	irix_sysmp	0	/* 1056  sysmp()	      HV*/
-	sys	irix_utssys	4	/* 1057  sys_utssys()	      HV*/
-	sys	irix_unimp	0	/* 1058  nada enchilada	       V*/
-	sys	irix_exece	0	/* 1059  exece()	       V*/
-	sys	sys_umask	1	/* 1060  umask()	       V*/
-	sys	sys_chroot	1	/* 1061  chroot()	       V*/
-	sys	irix_fcntl	3	/* 1062  fcntl()	      ?V*/
-	sys	irix_ulimit	2	/* 1063  ulimit()	      HV*/
-	sys	irix_unimp	0	/* 1064  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1065  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1066  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1067  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1068  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1069  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1070  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1071  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1072  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1073  XXX AFS shit	      DC*/
-	sys	irix_unimp	0	/* 1074  nuttin'	       V*/
-	sys	irix_unimp	0	/* 1075  XXX sys_getrlimit64()IV*/
-	sys	irix_unimp	0	/* 1076  XXX sys_setrlimit64()IV*/
-	sys	sys_nanosleep	2	/* 1077  nanosleep()	       V*/
-	sys	irix_lseek64	5	/* 1078  lseek64()	      ?V*/
-	sys	sys_rmdir	1	/* 1079  rmdir()	       V*/
-	sys	sys_mkdir	2	/* 1080  mkdir()	       V*/
-	sys	sys_getdents	3	/* 1081  getdents()	       V*/
-	sys	irix_sginap	1	/* 1082  sys_sginap()	       V*/
-	sys	irix_sgikopt	3	/* 1083  sys_sgikopt()	      DC*/
-	sys	sys_sysfs	3	/* 1084  sysfs()	      ?V*/
-	sys	irix_unimp	0	/* 1085  XXX sys_getmsg()     DC*/
-	sys	irix_unimp	0	/* 1086  XXX sys_putmsg()     DC*/
-	sys	sys_poll	3	/* 1087  poll()	               V*/
-	sys	irix_sigreturn	0	/* 1088  sigreturn()	      ?V*/
-	sys	sys_accept	3	/* 1089  accept()	       V*/
-	sys	sys_bind	3	/* 1090  bind()		       V*/
-	sys	sys_connect	3	/* 1091  connect()	       V*/
-	sys	irix_gethostid	0	/* 1092  sys_gethostid()      ?V*/
-	sys	sys_getpeername	3	/* 1093  getpeername()	       V*/
-	sys	sys_getsockname	3	/* 1094  getsockname()	       V*/
-	sys	sys_getsockopt	5	/* 1095  getsockopt()	       V*/
-	sys	sys_listen	2	/* 1096  listen()	       V*/
-	sys	sys_recv	4	/* 1097  recv()		       V*/
-	sys	sys_recvfrom	6	/* 1098  recvfrom()	       V*/
-	sys	sys_recvmsg	3	/* 1099  recvmsg()	       V*/
-	sys	sys_select	5	/* 1100  select()	       V*/
-	sys	sys_send	4	/* 1101  send()		       V*/
-	sys	sys_sendmsg	3	/* 1102  sendmsg()	       V*/
-	sys	sys_sendto	6	/* 1103  sendto()	       V*/
-	sys	irix_sethostid	1	/* 1104  sys_sethostid()      ?V*/
-	sys	sys_setsockopt	5	/* 1105  setsockopt()	       V*/
-	sys	sys_shutdown	2	/* 1106  shutdown()	      ?V*/
-	sys	irix_socket	3	/* 1107  socket()	       V*/
-	sys	sys_gethostname	2	/* 1108  sys_gethostname()    ?V*/
-	sys	sys_sethostname	2	/* 1109  sethostname()	      ?V*/
-	sys	irix_getdomainname 2	/* 1110  sys_getdomainname()  ?V*/
-	sys	sys_setdomainname 2	/* 1111  setdomainname()      ?V*/
-	sys	sys_truncate	2	/* 1112  truncate()	       V*/
-	sys	sys_ftruncate	2	/* 1113  ftruncate()	       V*/
-	sys	sys_rename	2	/* 1114  rename()	       V*/
-	sys	sys_symlink	2	/* 1115  symlink()	       V*/
-	sys	sys_readlink	3	/* 1116  readlink()	       V*/
-	sys	irix_unimp	0	/* 1117  XXX IRIX 4 lstat()   DC*/
-	sys	irix_unimp	0	/* 1118  nothin'	       V*/
-	sys	irix_unimp	0	/* 1119  XXX nfs_svc()	      DC*/
-	sys	irix_unimp	0	/* 1120  XXX nfs_getfh()      DC*/
-	sys	irix_unimp	0	/* 1121  XXX async_daemon()   DC*/
-	sys	irix_unimp	0	/* 1122  XXX exportfs()	      DC*/
-	sys	sys_setregid	2	/* 1123  setregid()	       V*/
-	sys	sys_setreuid	2	/* 1124  setreuid()	       V*/
-	sys	sys_getitimer	2	/* 1125  getitimer()	       V*/
-	sys	sys_setitimer	3	/* 1126  setitimer()	       V*/
-	sys	irix_unimp	1	/* 1127  XXX adjtime() 	      IV*/
-	sys	irix_gettimeofday 1	/* 1128  gettimeofday()	       V*/
-	sys	irix_unimp	0	/* 1129  XXX sproc()	      IV*/
-	sys	irix_prctl	0	/* 1130  prctl()	      HV*/
-	sys	irix_unimp	0	/* 1131  XXX procblk()	      IV*/
-	sys	irix_unimp	0	/* 1132  XXX sprocsp()	      IV*/
-	sys	irix_unimp	0	/* 1133  XXX sgigsc()	      IV*/
-	sys	irix_mmap32	6	/* 1134  mmap()	   XXXflags?  ?V*/
-	sys	sys_munmap	2	/* 1135  munmap()	       V*/
-	sys	sys_mprotect	3	/* 1136  mprotect()	       V*/
-	sys	sys_msync	4	/* 1137  msync()	       V*/
-	sys	irix_madvise	3	/* 1138  madvise()	      DC*/
-	sys	irix_pagelock	3	/* 1139  pagelock()	      IV*/
-	sys	irix_getpagesize 0	/* 1140  getpagesize()         V*/
-	sys	irix_quotactl	0	/* 1141  quotactl()	       V*/
-	sys	irix_unimp	0	/* 1142  nobody home man       V*/
-	sys	sys_getpgid	1	/* 1143  BSD getpgrp()	       V*/
-	sys	irix_BSDsetpgrp 2	/* 1143  BSD setpgrp()	       V*/
-	sys	sys_vhangup	0	/* 1144  vhangup()	       V*/
-	sys	sys_fsync	1	/* 1145  fsync()	       V*/
-	sys	sys_fchdir	1	/* 1146  fchdir()	       V*/
-	sys	sys_getrlimit	2	/* 1147  getrlimit()	      ?V*/
-	sys	sys_setrlimit	2	/* 1148  setrlimit()	      ?V*/
-	sys	sys_cacheflush	3	/* 1150  cacheflush()	      HV*/
-	sys	sys_cachectl	3	/* 1151  cachectl()	      HV*/
-	sys	sys_fchown	3	/* 1152  fchown()	      ?V*/
-	sys	sys_fchmod	2	/* 1153  fchmod()	      ?V*/
-	sys	irix_unimp	0	/* 1154  XXX IRIX 4 wait3()    V*/
-	sys	sys_socketpair	4	/* 1155  socketpair()	       V*/
-	sys	irix_systeminfo	3	/* 1156  systeminfo()	      IV*/
-	sys	irix_uname	1	/* 1157  uname()	      IV*/
-	sys	irix_xstat	3	/* 1158  xstat()	       V*/
-	sys	irix_lxstat	3	/* 1159  lxstat()	       V*/
-	sys	irix_fxstat	3	/* 1160  fxstat()	       V*/
-	sys	irix_xmknod	0	/* 1161  xmknod()	      ?V*/
-	sys	irix_sigaction	4	/* 1162  sigaction()	      ?V*/
-	sys	irix_sigpending	1	/* 1163  sigpending()	      ?V*/
-	sys	irix_sigprocmask 3	/* 1164  sigprocmask()	      ?V*/
-	sys	irix_sigsuspend	0	/* 1165  sigsuspend()	      ?V*/
-	sys	irix_sigpoll_sys 3	/* 1166  sigpoll_sys()	      IV*/
-	sys	irix_swapctl	2	/* 1167  swapctl()	      IV*/
-	sys	irix_getcontext	0	/* 1168  getcontext()	      HV*/
-	sys	irix_setcontext	0	/* 1169  setcontext()	      HV*/
-	sys	irix_waitsys	5	/* 1170  waitsys()	      IV*/
-	sys	irix_sigstack	2	/* 1171  sigstack()	      HV*/
-	sys	irix_sigaltstack 2	/* 1172  sigaltstack()	      HV*/
-	sys	irix_sigsendset	2	/* 1173  sigsendset()	      IV*/
-	sys	irix_statvfs	2	/* 1174  statvfs()	       V*/
-	sys	irix_fstatvfs	2	/* 1175  fstatvfs()	       V*/
-	sys	irix_unimp	0	/* 1176  XXX getpmsg()	      DC*/
-	sys	irix_unimp	0	/* 1177  XXX putpmsg()	      DC*/
-	sys	sys_lchown	3	/* 1178  lchown()	       V*/
-	sys	irix_priocntl	0	/* 1179  priocntl()	      DC*/
-	sys	irix_sigqueue	4	/* 1180  sigqueue()	      IV*/
-	sys	sys_readv	3	/* 1181  readv()	       V*/
-	sys	sys_writev	3	/* 1182  writev()	       V*/
-	sys	irix_truncate64 4	/* 1183  truncate64() XX32bit HV*/
-	sys	irix_ftruncate64 4	/* 1184  ftruncate64()XX32bit HV*/
-	sys	irix_mmap64	0	/* 1185  mmap64()     XX32bit HV*/
-	sys	irix_dmi	0	/* 1186  dmi()		      DC*/
-	sys	irix_pread	6	/* 1187  pread()	      IV*/
-	sys	irix_pwrite	6	/* 1188  pwrite()	      IV*/
-	sys	sys_fsync	1	/* 1189  fdatasync()  XXPOSIX HV*/
-	sys	irix_sgifastpath 7	/* 1190  sgifastpath() WHEEE  IV*/
-	sys	irix_unimp	0	/* 1191  XXX attr_get()	      DC*/
-	sys	irix_unimp	0	/* 1192  XXX attr_getf()      DC*/
-	sys	irix_unimp	0	/* 1193  XXX attr_set()	      DC*/
-	sys	irix_unimp	0	/* 1194  XXX attr_setf()      DC*/
-	sys	irix_unimp	0	/* 1195  XXX attr_remove()    DC*/
-	sys	irix_unimp	0	/* 1196  XXX attr_removef()   DC*/
-	sys	irix_unimp	0	/* 1197  XXX attr_list()      DC*/
-	sys	irix_unimp	0	/* 1198  XXX attr_listf()     DC*/
-	sys	irix_unimp	0	/* 1199  XXX attr_multi()     DC*/
-	sys	irix_unimp	0	/* 1200  XXX attr_multif()    DC*/
-	sys	irix_statvfs64	2	/* 1201  statvfs64()	       V*/
-	sys	irix_fstatvfs64	2	/* 1202  fstatvfs64()	       V*/
-	sys	irix_getmountid	2	/* 1203  getmountid()XXXfsids HV*/
-	sys	irix_nsproc	5	/* 1204  nsproc()	      IV*/
-	sys	irix_getdents64 3	/* 1205  getdents64()	      HV*/
-	sys	irix_unimp	0	/* 1206  XXX DFS garbage      DC*/
-	sys	irix_ngetdents	4	/* 1207  ngetdents() XXXeop   HV*/
-	sys	irix_ngetdents64 4	/* 1208  ngetdents64() XXXeop HV*/
-	sys	irix_unimp	0	/* 1209  nothin'	       V*/
-	sys	irix_unimp	0	/* 1210  XXX pidsprocsp()	*/
-	sys	irix_unimp	0	/* 1211  XXX rexec()		*/
-	sys	irix_unimp	0	/* 1212  XXX timer_create()	*/
-	sys	irix_unimp	0	/* 1213  XXX timer_delete()	*/
-	sys	irix_unimp	0	/* 1214  XXX timer_settime()	*/
-	sys	irix_unimp	0	/* 1215  XXX timer_gettime()	*/
-	sys	irix_unimp	0	/* 1216  XXX timer_setoverrun()	*/
-	sys	sys_sched_rr_get_interval 2		/* 1217  sched_rr_get_interval()V*/
-	sys	sys_sched_yield	0	/* 1218  sched_yield()	       V*/
-	sys	sys_sched_getscheduler 1 /* 1219  sched_getscheduler()  V*/
-	sys	sys_sched_setscheduler 3 /* 1220  sched_setscheduler()  V*/
-	sys	sys_sched_getparam 2	/* 1221  sched_getparam()      V*/
-	sys	sys_sched_setparam 2	/* 1222  sched_setparam()      V*/
-	sys	irix_unimp	0	/* 1223  XXX usync_cntl()	*/
-	sys	irix_unimp	0	/* 1224  XXX psema_cntl()	*/
-	sys	irix_unimp	0	/* 1225  XXX restartreturn()	*/
-
-	/* Just to pad things out nicely. */
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-	sys	irix_unimp	0
-
-	.endm
-
-	/*
-	 * Pre-compute the number of _instruction_ bytes needed to load
-	 * or store the arguments 6-8. Negative values are ignored.
-	 */
-	.macro  sys function, nargs
-	PTR	\function
-	LONG	(\nargs << 2) - (5 << 2)
-	.endm
-
-	.align	4
-EXPORT(sys_call_table_irix5)
-	irix5syscalltable
diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c
deleted file mode 100644
index 469c7237e5ba..000000000000
--- a/arch/mips/kernel/irixelf.c
+++ /dev/null
@@ -1,1361 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * irixelf.c: Code to load IRIX ELF executables conforming to the MIPS ABI.
- *            Based off of work by Eric Youngdale.
- *
- * Copyright (C) 1993 - 1994 Eric Youngdale <ericy@cais.com>
- * Copyright (C) 1996 - 2004 David S. Miller <dm@engr.sgi.com>
- * Copyright (C) 2004 - 2005 Steven J. Hill <sjhill@realitydiluted.com>
- */
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/stat.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/mman.h>
-#include <linux/a.out.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/signal.h>
-#include <linux/binfmts.h>
-#include <linux/string.h>
-#include <linux/file.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/shm.h>
-#include <linux/personality.h>
-#include <linux/elfcore.h>
-
-#include <asm/mipsregs.h>
-#include <asm/namei.h>
-#include <asm/prctl.h>
-#include <asm/uaccess.h>
-
-#define DLINFO_ITEMS 12
-
-#include <linux/elf.h>
-
-static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs);
-static int load_irix_library(struct file *);
-static int irix_core_dump(long signr, struct pt_regs * regs,
-                          struct file *file, unsigned long limit);
-
-static struct linux_binfmt irix_format = {
-	.module		= THIS_MODULE,
-	.load_binary	= load_irix_binary,
-	.load_shlib	= load_irix_library,
-	.core_dump	= irix_core_dump,
-	.min_coredump	= PAGE_SIZE,
-};
-
-/* Debugging routines. */
-static char *get_elf_p_type(Elf32_Word p_type)
-{
-#ifdef DEBUG
-	switch (p_type) {
-	case PT_NULL:
-		return "PT_NULL";
-		break;
-
-	case PT_LOAD:
-		return "PT_LOAD";
-		break;
-
-	case PT_DYNAMIC:
-		return "PT_DYNAMIC";
-		break;
-
-	case PT_INTERP:
-		return "PT_INTERP";
-		break;
-
-	case PT_NOTE:
-		return "PT_NOTE";
-		break;
-
-	case PT_SHLIB:
-		return "PT_SHLIB";
-		break;
-
-	case PT_PHDR:
-		return "PT_PHDR";
-		break;
-
-	case PT_LOPROC:
-		return "PT_LOPROC/REGINFO";
-		break;
-
-	case PT_HIPROC:
-		return "PT_HIPROC";
-		break;
-
-	default:
-		return "PT_BOGUS";
-		break;
-	}
-#endif
-}
-
-static void print_elfhdr(struct elfhdr *ehp)
-{
-	int i;
-
-	pr_debug("ELFHDR: e_ident<");
-	for (i = 0; i < (EI_NIDENT - 1); i++)
-		pr_debug("%x ", ehp->e_ident[i]);
-	pr_debug("%x>\n", ehp->e_ident[i]);
-	pr_debug("        e_type[%04x] e_machine[%04x] e_version[%08lx]\n",
-	         (unsigned short) ehp->e_type, (unsigned short) ehp->e_machine,
-	         (unsigned long) ehp->e_version);
-	pr_debug("        e_entry[%08lx] e_phoff[%08lx] e_shoff[%08lx] "
-	         "e_flags[%08lx]\n",
-	         (unsigned long) ehp->e_entry, (unsigned long) ehp->e_phoff,
-	         (unsigned long) ehp->e_shoff, (unsigned long) ehp->e_flags);
-	pr_debug("        e_ehsize[%04x] e_phentsize[%04x] e_phnum[%04x]\n",
-	         (unsigned short) ehp->e_ehsize,
-	         (unsigned short) ehp->e_phentsize,
-	         (unsigned short) ehp->e_phnum);
-	pr_debug("        e_shentsize[%04x] e_shnum[%04x] e_shstrndx[%04x]\n",
-	         (unsigned short) ehp->e_shentsize,
-	         (unsigned short) ehp->e_shnum,
-	         (unsigned short) ehp->e_shstrndx);
-}
-
-static void print_phdr(int i, struct elf_phdr *ep)
-{
-	pr_debug("PHDR[%d]: p_type[%s] p_offset[%08lx] p_vaddr[%08lx] "
-	         "p_paddr[%08lx]\n", i, get_elf_p_type(ep->p_type),
-	         (unsigned long) ep->p_offset, (unsigned long) ep->p_vaddr,
-	         (unsigned long) ep->p_paddr);
-	pr_debug("         p_filesz[%08lx] p_memsz[%08lx] p_flags[%08lx] "
-	         "p_align[%08lx]\n", (unsigned long) ep->p_filesz,
-	         (unsigned long) ep->p_memsz, (unsigned long) ep->p_flags,
-	         (unsigned long) ep->p_align);
-}
-
-static void dump_phdrs(struct elf_phdr *ep, int pnum)
-{
-	int i;
-
-	for (i = 0; i < pnum; i++, ep++) {
-		if ((ep->p_type == PT_LOAD) ||
-		    (ep->p_type == PT_INTERP) ||
-		    (ep->p_type == PT_PHDR))
-			print_phdr(i, ep);
-	}
-}
-
-static void set_brk(unsigned long start, unsigned long end)
-{
-	start = PAGE_ALIGN(start);
-	end = PAGE_ALIGN(end);
-	if (end <= start)
-		return;
-	down_write(&current->mm->mmap_sem);
-	do_brk(start, end - start);
-	up_write(&current->mm->mmap_sem);
-}
-
-
-/* We need to explicitly zero any fractional pages
- * after the data section (i.e. bss).  This would
- * contain the junk from the file that should not
- * be in memory.
- */
-static void padzero(unsigned long elf_bss)
-{
-	unsigned long nbyte;
-
-	nbyte = elf_bss & (PAGE_SIZE-1);
-	if (nbyte) {
-		nbyte = PAGE_SIZE - nbyte;
-		clear_user((void __user *) elf_bss, nbyte);
-	}
-}
-
-static unsigned long * create_irix_tables(char * p, int argc, int envc,
-	struct elfhdr * exec, unsigned int load_addr,
-	unsigned int interp_load_addr, struct pt_regs *regs,
-	struct elf_phdr *ephdr)
-{
-	elf_addr_t *argv;
-	elf_addr_t *envp;
-	elf_addr_t *sp, *csp;
-
-	pr_debug("create_irix_tables: p[%p] argc[%d] envc[%d] "
-	         "load_addr[%08x] interp_load_addr[%08x]\n",
-	         p, argc, envc, load_addr, interp_load_addr);
-
-	sp = (elf_addr_t *) (~15UL & (unsigned long) p);
-	csp = sp;
-	csp -= exec ? DLINFO_ITEMS*2 : 2;
-	csp -= envc+1;
-	csp -= argc+1;
-	csp -= 1;		/* argc itself */
-	if ((unsigned long)csp & 15UL) {
-		sp -= (16UL - ((unsigned long)csp & 15UL)) / sizeof(*sp);
-	}
-
-	/*
-	 * Put the ELF interpreter info on the stack
-	 */
-#define NEW_AUX_ENT(nr, id, val) \
-	  __put_user((id), sp+(nr*2)); \
-	  __put_user((val), sp+(nr*2+1)); \
-
-	sp -= 2;
-	NEW_AUX_ENT(0, AT_NULL, 0);
-
-	if (exec) {
-		sp -= 11*2;
-
-		NEW_AUX_ENT(0, AT_PHDR, load_addr + exec->e_phoff);
-		NEW_AUX_ENT(1, AT_PHENT, sizeof(struct elf_phdr));
-		NEW_AUX_ENT(2, AT_PHNUM, exec->e_phnum);
-		NEW_AUX_ENT(3, AT_PAGESZ, ELF_EXEC_PAGESIZE);
-		NEW_AUX_ENT(4, AT_BASE, interp_load_addr);
-		NEW_AUX_ENT(5, AT_FLAGS, 0);
-		NEW_AUX_ENT(6, AT_ENTRY, (elf_addr_t) exec->e_entry);
-		NEW_AUX_ENT(7, AT_UID, (elf_addr_t) current->uid);
-		NEW_AUX_ENT(8, AT_EUID, (elf_addr_t) current->euid);
-		NEW_AUX_ENT(9, AT_GID, (elf_addr_t) current->gid);
-		NEW_AUX_ENT(10, AT_EGID, (elf_addr_t) current->egid);
-	}
-#undef NEW_AUX_ENT
-
-	sp -= envc+1;
-	envp = sp;
-	sp -= argc+1;
-	argv = sp;
-
-	__put_user((elf_addr_t)argc, --sp);
-	current->mm->arg_start = (unsigned long) p;
-	while (argc-->0) {
-		__put_user((unsigned long)p, argv++);
-		p += strlen_user(p);
-	}
-	__put_user((unsigned long) NULL, argv);
-	current->mm->arg_end = current->mm->env_start = (unsigned long) p;
-	while (envc-->0) {
-		__put_user((unsigned long)p, envp++);
-		p += strlen_user(p);
-	}
-	__put_user((unsigned long) NULL, envp);
-	current->mm->env_end = (unsigned long) p;
-	return sp;
-}
-
-
-/* This is much more generalized than the library routine read function,
- * so we keep this separate.  Technically the library read function
- * is only provided so that we can read a.out libraries that have
- * an ELF header.
- */
-static unsigned int load_irix_interp(struct elfhdr * interp_elf_ex,
-				     struct file * interpreter,
-				     unsigned int *interp_load_addr)
-{
-	struct elf_phdr *elf_phdata  =  NULL;
-	struct elf_phdr *eppnt;
-	unsigned int len;
-	unsigned int load_addr;
-	int elf_bss;
-	int retval;
-	unsigned int last_bss;
-	int error;
-	int i;
-	unsigned int k;
-
-	elf_bss = 0;
-	last_bss = 0;
-	error = load_addr = 0;
-
-	print_elfhdr(interp_elf_ex);
-
-	/* First of all, some simple consistency checks */
-	if ((interp_elf_ex->e_type != ET_EXEC &&
-	     interp_elf_ex->e_type != ET_DYN) ||
-	     !interpreter->f_op->mmap) {
-		printk("IRIX interp has bad e_type %d\n", interp_elf_ex->e_type);
-		return 0xffffffff;
-	}
-
-	/* Now read in all of the header information */
-	if (sizeof(struct elf_phdr) * interp_elf_ex->e_phnum > PAGE_SIZE) {
-	    printk("IRIX interp header bigger than a page (%d)\n",
-		   (sizeof(struct elf_phdr) * interp_elf_ex->e_phnum));
-	    return 0xffffffff;
-	}
-
-	elf_phdata = kmalloc(sizeof(struct elf_phdr) * interp_elf_ex->e_phnum,
-			     GFP_KERNEL);
-
-	if (!elf_phdata) {
-		printk("Cannot kmalloc phdata for IRIX interp.\n");
-		return 0xffffffff;
-	}
-
-	/* If the size of this structure has changed, then punt, since
-	 * we will be doing the wrong thing.
-	 */
-	if (interp_elf_ex->e_phentsize != 32) {
-		printk("IRIX interp e_phentsize == %d != 32 ",
-		       interp_elf_ex->e_phentsize);
-		kfree(elf_phdata);
-		return 0xffffffff;
-	}
-
-	retval = kernel_read(interpreter, interp_elf_ex->e_phoff,
-			   (char *) elf_phdata,
-			   sizeof(struct elf_phdr) * interp_elf_ex->e_phnum);
-
-	dump_phdrs(elf_phdata, interp_elf_ex->e_phnum);
-
-	eppnt = elf_phdata;
-	for (i = 0; i < interp_elf_ex->e_phnum; i++, eppnt++) {
-		if (eppnt->p_type == PT_LOAD) {
-			int elf_type = MAP_PRIVATE | MAP_DENYWRITE;
-			int elf_prot = 0;
-			unsigned long vaddr = 0;
-			if (eppnt->p_flags & PF_R)
-				elf_prot =  PROT_READ;
-			if (eppnt->p_flags & PF_W)
-				elf_prot |= PROT_WRITE;
-			if (eppnt->p_flags & PF_X)
-				elf_prot |= PROT_EXEC;
-			elf_type |= MAP_FIXED;
-			vaddr = eppnt->p_vaddr;
-
-			pr_debug("INTERP do_mmap"
-			         "(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ",
-			         interpreter, vaddr,
-			         (unsigned long)
-			         (eppnt->p_filesz + (eppnt->p_vaddr & 0xfff)),
-			         (unsigned long)
-			         elf_prot, (unsigned long) elf_type,
-			         (unsigned long)
-			         (eppnt->p_offset & 0xfffff000));
-
-			down_write(&current->mm->mmap_sem);
-			error = do_mmap(interpreter, vaddr,
-			eppnt->p_filesz + (eppnt->p_vaddr & 0xfff),
-			elf_prot, elf_type,
-			eppnt->p_offset & 0xfffff000);
-			up_write(&current->mm->mmap_sem);
-
-			if (error < 0 && error > -1024) {
-				printk("Aieee IRIX interp mmap error=%d\n",
-				       error);
-				break;  /* Real error */
-			}
-			pr_debug("error=%08lx ", (unsigned long) error);
-			if (!load_addr && interp_elf_ex->e_type == ET_DYN) {
-				load_addr = error;
-				pr_debug("load_addr = error ");
-			}
-
-			/*
-			 * Find the end of the file  mapping for this phdr, and
-			 * keep track of the largest address we see for this.
-			 */
-			k = eppnt->p_vaddr + eppnt->p_filesz;
-			if (k > elf_bss)
-				elf_bss = k;
-
-			/* Do the same thing for the memory mapping - between
-			 * elf_bss and last_bss is the bss section.
-			 */
-			k = eppnt->p_memsz + eppnt->p_vaddr;
-			if (k > last_bss)
-				last_bss = k;
-			pr_debug("\n");
-		}
-	}
-
-	/* Now use mmap to map the library into memory. */
-	if (error < 0 && error > -1024) {
-		pr_debug("got error %d\n", error);
-		kfree(elf_phdata);
-		return 0xffffffff;
-	}
-
-	/* Now fill out the bss section.  First pad the last page up
-	 * to the page boundary, and then perform a mmap to make sure
-	 * that there are zero-mapped pages up to and including the
-	 * last bss page.
-	 */
-	pr_debug("padzero(%08lx) ", (unsigned long) (elf_bss));
-	padzero(elf_bss);
-	len = (elf_bss + 0xfff) & 0xfffff000; /* What we have mapped so far */
-
-	pr_debug("last_bss[%08lx] len[%08lx]\n", (unsigned long) last_bss,
-	         (unsigned long) len);
-
-	/* Map the last of the bss segment */
-	if (last_bss > len) {
-		down_write(&current->mm->mmap_sem);
-		do_brk(len, (last_bss - len));
-		up_write(&current->mm->mmap_sem);
-	}
-	kfree(elf_phdata);
-
-	*interp_load_addr = load_addr;
-	return ((unsigned int) interp_elf_ex->e_entry);
-}
-
-/* Check sanity of IRIX elf executable header. */
-static int verify_binary(struct elfhdr *ehp, struct linux_binprm *bprm)
-{
-	if (memcmp(ehp->e_ident, ELFMAG, SELFMAG) != 0)
-		return -ENOEXEC;
-
-	/* First of all, some simple consistency checks */
-	if ((ehp->e_type != ET_EXEC && ehp->e_type != ET_DYN) ||
-	    !bprm->file->f_op->mmap) {
-		return -ENOEXEC;
-	}
-
-	/* XXX Don't support N32 or 64bit binaries yet because they can
-	 * XXX and do execute 64 bit instructions and expect all registers
-	 * XXX to be 64 bit as well.  We need to make the kernel save
-	 * XXX all registers as 64bits on cpu's capable of this at
-	 * XXX exception time plus frob the XTLB exception vector.
-	 */
-	if ((ehp->e_flags & EF_MIPS_ABI2))
-		return -ENOEXEC;
-
-	return 0;
-}
-
-/*
- * This is where the detailed check is performed. Irix binaries
- * use interpreters with 'libc.so' in the name, so this function
- * can differentiate between Linux and Irix binaries.
- */
-static inline int look_for_irix_interpreter(char **name,
-					    struct file **interpreter,
-					    struct elfhdr *interp_elf_ex,
-					    struct elf_phdr *epp,
-					    struct linux_binprm *bprm, int pnum)
-{
-	int i;
-	int retval = -EINVAL;
-	struct file *file = NULL;
-
-	*name = NULL;
-	for (i = 0; i < pnum; i++, epp++) {
-		if (epp->p_type != PT_INTERP)
-			continue;
-
-		/* It is illegal to have two interpreters for one executable. */
-		if (*name != NULL)
-			goto out;
-
-		*name = kmalloc(epp->p_filesz + strlen(IRIX_EMUL), GFP_KERNEL);
-		if (!*name)
-			return -ENOMEM;
-
-		strcpy(*name, IRIX_EMUL);
-		retval = kernel_read(bprm->file, epp->p_offset, (*name + 16),
-		                     epp->p_filesz);
-		if (retval < 0)
-			goto out;
-
-		file = open_exec(*name);
-		if (IS_ERR(file)) {
-			retval = PTR_ERR(file);
-			goto out;
-		}
-		retval = kernel_read(file, 0, bprm->buf, 128);
-		if (retval < 0)
-			goto dput_and_out;
-
-		*interp_elf_ex = *(struct elfhdr *) bprm->buf;
-	}
-	*interpreter = file;
-	return 0;
-
-dput_and_out:
-	fput(file);
-out:
-	kfree(*name);
-	return retval;
-}
-
-static inline int verify_irix_interpreter(struct elfhdr *ihp)
-{
-	if (memcmp(ihp->e_ident, ELFMAG, SELFMAG) != 0)
-		return -ELIBBAD;
-	return 0;
-}
-
-#define EXEC_MAP_FLAGS (MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE | MAP_EXECUTABLE)
-
-static inline void map_executable(struct file *fp, struct elf_phdr *epp, int pnum,
-				  unsigned int *estack, unsigned int *laddr,
-				  unsigned int *scode, unsigned int *ebss,
-				  unsigned int *ecode, unsigned int *edata,
-				  unsigned int *ebrk)
-{
-	unsigned int tmp;
-	int i, prot;
-
-	for (i = 0; i < pnum; i++, epp++) {
-		if (epp->p_type != PT_LOAD)
-			continue;
-
-		/* Map it. */
-		prot  = (epp->p_flags & PF_R) ? PROT_READ : 0;
-		prot |= (epp->p_flags & PF_W) ? PROT_WRITE : 0;
-		prot |= (epp->p_flags & PF_X) ? PROT_EXEC : 0;
-	        down_write(&current->mm->mmap_sem);
-		(void) do_mmap(fp, (epp->p_vaddr & 0xfffff000),
-			       (epp->p_filesz + (epp->p_vaddr & 0xfff)),
-			       prot, EXEC_MAP_FLAGS,
-			       (epp->p_offset & 0xfffff000));
-	        up_write(&current->mm->mmap_sem);
-
-		/* Fixup location tracking vars. */
-		if ((epp->p_vaddr & 0xfffff000) < *estack)
-			*estack = (epp->p_vaddr & 0xfffff000);
-		if (!*laddr)
-			*laddr = epp->p_vaddr - epp->p_offset;
-		if (epp->p_vaddr < *scode)
-			*scode = epp->p_vaddr;
-
-		tmp = epp->p_vaddr + epp->p_filesz;
-		if (tmp > *ebss)
-			*ebss = tmp;
-		if ((epp->p_flags & PF_X) && *ecode < tmp)
-			*ecode = tmp;
-		if (*edata < tmp)
-			*edata = tmp;
-
-		tmp = epp->p_vaddr + epp->p_memsz;
-		if (tmp > *ebrk)
-			*ebrk = tmp;
-	}
-
-}
-
-static inline int map_interpreter(struct elf_phdr *epp, struct elfhdr *ihp,
-				  struct file *interp, unsigned int *iladdr,
-				  int pnum, mm_segment_t old_fs,
-				  unsigned int *eentry)
-{
-	int i;
-
-	*eentry = 0xffffffff;
-	for (i = 0; i < pnum; i++, epp++) {
-		if (epp->p_type != PT_INTERP)
-			continue;
-
-		/* We should have fielded this error elsewhere... */
-		if (*eentry != 0xffffffff)
-			return -1;
-
-		set_fs(old_fs);
-		*eentry = load_irix_interp(ihp, interp, iladdr);
-		old_fs = get_fs();
-		set_fs(get_ds());
-
-		fput(interp);
-
-		if (*eentry == 0xffffffff)
-			return -1;
-	}
-	return 0;
-}
-
-/*
- * IRIX maps a page at 0x200000 that holds information about the
- * process and the system, here we map the page and fill the
- * structure
- */
-static int irix_map_prda_page(void)
-{
-	unsigned long v;
-	struct prda *pp;
-
-	down_write(&current->mm->mmap_sem);
-	v =  do_brk(PRDA_ADDRESS, PAGE_SIZE);
-	up_write(&current->mm->mmap_sem);
-
-	if (v != PRDA_ADDRESS)
-		return v;		/* v must be an error code */
-
-	pp = (struct prda *) v;
-	pp->prda_sys.t_pid  = task_pid_vnr(current);
-	pp->prda_sys.t_prid = read_c0_prid();
-	pp->prda_sys.t_rpid = task_pid_vnr(current);
-
-	/* We leave the rest set to zero */
-
-	return 0;
-}
-
-
-
-/* These are the functions used to load ELF style executables and shared
- * libraries.  There is no binary dependent code anywhere else.
- */
-static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs)
-{
-	struct elfhdr elf_ex, interp_elf_ex;
-	struct file *interpreter;
-	struct elf_phdr *elf_phdata, *elf_ihdr, *elf_ephdr;
-	unsigned int load_addr, elf_bss, elf_brk;
-	unsigned int elf_entry, interp_load_addr = 0;
-	unsigned int start_code, end_code, end_data, elf_stack;
-	int retval, has_interp, has_ephdr, size, i;
-	char *elf_interpreter;
-	mm_segment_t old_fs;
-
-	load_addr = 0;
-	has_interp = has_ephdr = 0;
-	elf_ihdr = elf_ephdr = NULL;
-	elf_ex = *((struct elfhdr *) bprm->buf);
-	retval = -ENOEXEC;
-
-	if (verify_binary(&elf_ex, bprm))
-		goto out;
-
-	/*
-	 * Telling -o32 static binaries from Linux and Irix apart from each
-	 * other is difficult. There are 2 differences to be noted for static
-	 * binaries from the 2 operating systems:
-	 *
-	 *    1) Irix binaries have their .text section before their .init
-	 *       section. Linux binaries are just the opposite.
-	 *
-	 *    2) Irix binaries usually have <= 12 sections and Linux
-	 *       binaries have > 20.
-	 *
-	 * We will use Method #2 since Method #1 would require us to read in
-	 * the section headers which is way too much overhead. This appears
-	 * to work for everything we have ran into so far. If anyone has a
-	 * better method to tell the binaries apart, I'm listening.
-	 */
-	if (elf_ex.e_shnum > 20)
-		goto out;
-
-	print_elfhdr(&elf_ex);
-
-	/* Now read in all of the header information */
-	size = elf_ex.e_phentsize * elf_ex.e_phnum;
-	if (size > 65536)
-		goto out;
-	elf_phdata = kmalloc(size, GFP_KERNEL);
-	if (elf_phdata == NULL) {
-		retval = -ENOMEM;
-		goto out;
-	}
-
-	retval = kernel_read(bprm->file, elf_ex.e_phoff, (char *)elf_phdata, size);
-	if (retval < 0)
-		goto out_free_ph;
-
-	dump_phdrs(elf_phdata, elf_ex.e_phnum);
-
-	/* Set some things for later. */
-	for (i = 0; i < elf_ex.e_phnum; i++) {
-		switch (elf_phdata[i].p_type) {
-		case PT_INTERP:
-			has_interp = 1;
-			elf_ihdr = &elf_phdata[i];
-			break;
-		case PT_PHDR:
-			has_ephdr = 1;
-			elf_ephdr = &elf_phdata[i];
-			break;
-		};
-	}
-
-	pr_debug("\n");
-
-	elf_bss = 0;
-	elf_brk = 0;
-
-	elf_stack = 0xffffffff;
-	elf_interpreter = NULL;
-	start_code = 0xffffffff;
-	end_code = 0;
-	end_data = 0;
-
-	/*
-	 * If we get a return value, we change the value to be ENOEXEC
-	 * so that we can exit gracefully and the main binary format
-	 * search loop in 'fs/exec.c' will move onto the next handler
-	 * which should be the normal ELF binary handler.
-	 */
-	retval = look_for_irix_interpreter(&elf_interpreter, &interpreter,
-					   &interp_elf_ex, elf_phdata, bprm,
-					   elf_ex.e_phnum);
-	if (retval) {
-		retval = -ENOEXEC;
-		goto out_free_file;
-	}
-
-	if (elf_interpreter) {
-		retval = verify_irix_interpreter(&interp_elf_ex);
-		if (retval)
-			goto out_free_interp;
-	}
-
-	/* OK, we are done with that, now set up the arg stuff,
-	 * and then start this sucker up.
-	 */
-	retval = -E2BIG;
-	if (!bprm->sh_bang && !bprm->p)
-		goto out_free_interp;
-
-	/* Flush all traces of the currently running executable */
-	retval = flush_old_exec(bprm);
-	if (retval)
-		goto out_free_dentry;
-
-	/* OK, This is the point of no return */
-	current->mm->end_data = 0;
-	current->mm->end_code = 0;
-	current->mm->mmap = NULL;
-	current->flags &= ~PF_FORKNOEXEC;
-	elf_entry = (unsigned int) elf_ex.e_entry;
-
-	/* Do this so that we can load the interpreter, if need be.  We will
-	 * change some of these later.
-	 */
-	setup_arg_pages(bprm, STACK_TOP, EXSTACK_DEFAULT);
-	current->mm->start_stack = bprm->p;
-
-	/* At this point, we assume that the image should be loaded at
-	 * fixed address, not at a variable address.
-	 */
-	old_fs = get_fs();
-	set_fs(get_ds());
-
-	map_executable(bprm->file, elf_phdata, elf_ex.e_phnum, &elf_stack,
-	               &load_addr, &start_code, &elf_bss, &end_code,
-	               &end_data, &elf_brk);
-
-	if (elf_interpreter) {
-		retval = map_interpreter(elf_phdata, &interp_elf_ex,
-					 interpreter, &interp_load_addr,
-					 elf_ex.e_phnum, old_fs, &elf_entry);
-		kfree(elf_interpreter);
-		if (retval) {
-			set_fs(old_fs);
-			printk("Unable to load IRIX ELF interpreter\n");
-			send_sig(SIGSEGV, current, 0);
-			retval = 0;
-			goto out_free_file;
-		}
-	}
-
-	set_fs(old_fs);
-
-	kfree(elf_phdata);
-	set_personality(PER_IRIX32);
-	set_binfmt(&irix_format);
-	compute_creds(bprm);
-	current->flags &= ~PF_FORKNOEXEC;
-	bprm->p = (unsigned long)
-	  create_irix_tables((char *)bprm->p, bprm->argc, bprm->envc,
-			(elf_interpreter ? &elf_ex : NULL),
-			load_addr, interp_load_addr, regs, elf_ephdr);
-	current->mm->start_brk = current->mm->brk = elf_brk;
-	current->mm->end_code = end_code;
-	current->mm->start_code = start_code;
-	current->mm->end_data = end_data;
-	current->mm->start_stack = bprm->p;
-
-	/* Calling set_brk effectively mmaps the pages that we need for the
-	 * bss and break sections.
-	 */
-	set_brk(elf_bss, elf_brk);
-
-	/*
-	 * IRIX maps a page at 0x200000 which holds some system
-	 * information.  Programs depend on this.
-	 */
-	if (irix_map_prda_page())
-		goto out_free_dentry;
-
-	padzero(elf_bss);
-
-	pr_debug("(start_brk) %lx\n" , (long) current->mm->start_brk);
-	pr_debug("(end_code) %lx\n" , (long) current->mm->end_code);
-	pr_debug("(start_code) %lx\n" , (long) current->mm->start_code);
-	pr_debug("(end_data) %lx\n" , (long) current->mm->end_data);
-	pr_debug("(start_stack) %lx\n" , (long) current->mm->start_stack);
-	pr_debug("(brk) %lx\n" , (long) current->mm->brk);
-
-#if 0 /* XXX No fucking way dude... */
-	/* Why this, you ask???  Well SVr4 maps page 0 as read-only,
-	 * and some applications "depend" upon this behavior.
-	 * Since we do not have the power to recompile these, we
-	 * emulate the SVr4 behavior.  Sigh.
-	 */
-	down_write(&current->mm->mmap_sem);
-	(void) do_mmap(NULL, 0, 4096, PROT_READ | PROT_EXEC,
-		       MAP_FIXED | MAP_PRIVATE, 0);
-	up_write(&current->mm->mmap_sem);
-#endif
-
-	start_thread(regs, elf_entry, bprm->p);
-	if (current->ptrace & PT_PTRACED)
-		send_sig(SIGTRAP, current, 0);
-	return 0;
-out:
-	return retval;
-
-out_free_dentry:
-	allow_write_access(interpreter);
-	fput(interpreter);
-out_free_interp:
-	kfree(elf_interpreter);
-out_free_file:
-out_free_ph:
-	kfree(elf_phdata);
-	goto out;
-}
-
-/* This is really simpleminded and specialized - we are loading an
- * a.out library that is given an ELF header.
- */
-static int load_irix_library(struct file *file)
-{
-	struct elfhdr elf_ex;
-	struct elf_phdr *elf_phdata  =  NULL;
-	unsigned int len = 0;
-	int elf_bss = 0;
-	int retval;
-	unsigned int bss;
-	int error;
-	int i, j, k;
-
-	error = kernel_read(file, 0, (char *) &elf_ex, sizeof(elf_ex));
-	if (error != sizeof(elf_ex))
-		return -ENOEXEC;
-
-	if (memcmp(elf_ex.e_ident, ELFMAG, SELFMAG) != 0)
-		return -ENOEXEC;
-
-	/* First of all, some simple consistency checks. */
-	if (elf_ex.e_type != ET_EXEC || elf_ex.e_phnum > 2 ||
-	   !file->f_op->mmap)
-		return -ENOEXEC;
-
-	/* Now read in all of the header information. */
-	if (sizeof(struct elf_phdr) * elf_ex.e_phnum > PAGE_SIZE)
-		return -ENOEXEC;
-
-	elf_phdata = kmalloc(sizeof(struct elf_phdr) * elf_ex.e_phnum, GFP_KERNEL);
-	if (elf_phdata == NULL)
-		return -ENOMEM;
-
-	retval = kernel_read(file, elf_ex.e_phoff, (char *) elf_phdata,
-			   sizeof(struct elf_phdr) * elf_ex.e_phnum);
-
-	j = 0;
-	for (i=0; i<elf_ex.e_phnum; i++)
-		if ((elf_phdata + i)->p_type == PT_LOAD) j++;
-
-	if (j != 1)  {
-		kfree(elf_phdata);
-		return -ENOEXEC;
-	}
-
-	while (elf_phdata->p_type != PT_LOAD) elf_phdata++;
-
-	/* Now use mmap to map the library into memory. */
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap(file,
-			elf_phdata->p_vaddr & 0xfffff000,
-			elf_phdata->p_filesz + (elf_phdata->p_vaddr & 0xfff),
-			PROT_READ | PROT_WRITE | PROT_EXEC,
-			MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE,
-			elf_phdata->p_offset & 0xfffff000);
-	up_write(&current->mm->mmap_sem);
-
-	k = elf_phdata->p_vaddr + elf_phdata->p_filesz;
-	if (k > elf_bss) elf_bss = k;
-
-	if (error != (elf_phdata->p_vaddr & 0xfffff000)) {
-		kfree(elf_phdata);
-		return error;
-	}
-
-	padzero(elf_bss);
-
-	len = (elf_phdata->p_filesz + elf_phdata->p_vaddr+ 0xfff) & 0xfffff000;
-	bss = elf_phdata->p_memsz + elf_phdata->p_vaddr;
-	if (bss > len) {
-	  down_write(&current->mm->mmap_sem);
-	  do_brk(len, bss-len);
-	  up_write(&current->mm->mmap_sem);
-	}
-	kfree(elf_phdata);
-	return 0;
-}
-
-/* Called through irix_syssgi() to map an elf image given an FD,
- * a phdr ptr USER_PHDRP in userspace, and a count CNT telling how many
- * phdrs there are in the USER_PHDRP array.  We return the vaddr the
- * first phdr was successfully mapped to.
- */
-unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt)
-{
-	unsigned long type, vaddr, filesz, offset, flags;
-	struct elf_phdr __user *hp;
-	struct file *filp;
-	int i, retval;
-
-	pr_debug("irix_mapelf: fd[%d] user_phdrp[%p] cnt[%d]\n",
-	         fd, user_phdrp, cnt);
-
-	/* First get the verification out of the way. */
-	hp = user_phdrp;
-	if (!access_ok(VERIFY_READ, hp, (sizeof(struct elf_phdr) * cnt))) {
-		pr_debug("irix_mapelf: bad pointer to ELF PHDR!\n");
-
-		return -EFAULT;
-	}
-
-	dump_phdrs(user_phdrp, cnt);
-
-	for (i = 0; i < cnt; i++, hp++) {
-		if (__get_user(type, &hp->p_type))
-			return -EFAULT;
-		if (type != PT_LOAD) {
-			printk("irix_mapelf: One section is not PT_LOAD!\n");
-			return -ENOEXEC;
-		}
-	}
-
-	filp = fget(fd);
-	if (!filp)
-		return -EACCES;
-	if (!filp->f_op) {
-		printk("irix_mapelf: Bogon filp!\n");
-		fput(filp);
-		return -EACCES;
-	}
-
-	hp = user_phdrp;
-	for (i = 0; i < cnt; i++, hp++) {
-		int prot;
-
-		retval = __get_user(vaddr, &hp->p_vaddr);
-		retval |= __get_user(filesz, &hp->p_filesz);
-		retval |= __get_user(offset, &hp->p_offset);
-		retval |= __get_user(flags, &hp->p_flags);
-		if (retval)
-			return retval;
-
-		prot  = (flags & PF_R) ? PROT_READ : 0;
-		prot |= (flags & PF_W) ? PROT_WRITE : 0;
-		prot |= (flags & PF_X) ? PROT_EXEC : 0;
-
-		down_write(&current->mm->mmap_sem);
-		retval = do_mmap(filp, (vaddr & 0xfffff000),
-				 (filesz + (vaddr & 0xfff)),
-				 prot, (MAP_FIXED | MAP_PRIVATE | MAP_DENYWRITE),
-				 (offset & 0xfffff000));
-		up_write(&current->mm->mmap_sem);
-
-		if (retval != (vaddr & 0xfffff000)) {
-			printk("irix_mapelf: do_mmap fails with %d!\n", retval);
-			fput(filp);
-			return retval;
-		}
-	}
-
-	pr_debug("irix_mapelf: Success, returning %08lx\n",
-		 (unsigned long) user_phdrp->p_vaddr);
-
-	fput(filp);
-
-	if (__get_user(vaddr, &user_phdrp->p_vaddr))
-		return -EFAULT;
-
-	return vaddr;
-}
-
-/*
- * ELF core dumper
- *
- * Modelled on fs/exec.c:aout_core_dump()
- * Jeremy Fitzhardinge <jeremy@sw.oz.au>
- */
-
-/* These are the only things you should do on a core-file: use only these
- * functions to write out all the necessary info.
- */
-static int dump_write(struct file *file, const void __user *addr, int nr)
-{
-	return file->f_op->write(file, (const char __user *) addr, nr, &file->f_pos) == nr;
-}
-
-static int dump_seek(struct file *file, off_t off)
-{
-	if (file->f_op->llseek) {
-		if (file->f_op->llseek(file, off, 0) != off)
-			return 0;
-	} else
-		file->f_pos = off;
-	return 1;
-}
-
-/* Decide whether a segment is worth dumping; default is yes to be
- * sure (missing info is worse than too much; etc).
- * Personally I'd include everything, and use the coredump limit...
- *
- * I think we should skip something. But I am not sure how. H.J.
- */
-static inline int maydump(struct vm_area_struct *vma)
-{
-	if (!(vma->vm_flags & (VM_READ|VM_WRITE|VM_EXEC)))
-		return 0;
-#if 1
-	if (vma->vm_flags & (VM_WRITE|VM_GROWSUP|VM_GROWSDOWN))
-		return 1;
-	if (vma->vm_flags & (VM_READ|VM_EXEC|VM_EXECUTABLE|VM_SHARED))
-		return 0;
-#endif
-	return 1;
-}
-
-/* An ELF note in memory. */
-struct memelfnote
-{
-	const char *name;
-	int type;
-	unsigned int datasz;
-	void *data;
-};
-
-static int notesize(struct memelfnote *en)
-{
-	int sz;
-
-	sz = sizeof(struct elf_note);
-	sz += roundup(strlen(en->name) + 1, 4);
-	sz += roundup(en->datasz, 4);
-
-	return sz;
-}
-
-#define DUMP_WRITE(addr, nr)	\
-	if (!dump_write(file, (addr), (nr))) \
-		goto end_coredump;
-#define DUMP_SEEK(off)	\
-	if (!dump_seek(file, (off))) \
-		goto end_coredump;
-
-static int writenote(struct memelfnote *men, struct file *file)
-{
-	struct elf_note en;
-
-	en.n_namesz = strlen(men->name) + 1;
-	en.n_descsz = men->datasz;
-	en.n_type = men->type;
-
-	DUMP_WRITE(&en, sizeof(en));
-	DUMP_WRITE(men->name, en.n_namesz);
-	/* XXX - cast from long long to long to avoid need for libgcc.a */
-	DUMP_SEEK(roundup((unsigned long)file->f_pos, 4));	/* XXX */
-	DUMP_WRITE(men->data, men->datasz);
-	DUMP_SEEK(roundup((unsigned long)file->f_pos, 4));	/* XXX */
-
-	return 1;
-
-end_coredump:
-	return 0;
-}
-#undef DUMP_WRITE
-#undef DUMP_SEEK
-
-#define DUMP_WRITE(addr, nr)	\
-	if (!dump_write(file, (addr), (nr))) \
-		goto end_coredump;
-#define DUMP_SEEK(off)	\
-	if (!dump_seek(file, (off))) \
-		goto end_coredump;
-
-/* Actual dumper.
- *
- * This is a two-pass process; first we find the offsets of the bits,
- * and then they are actually written out.  If we run out of core limit
- * we just truncate.
- */
-static int irix_core_dump(long signr, struct pt_regs *regs, struct file *file, unsigned long limit)
-{
-	int has_dumped = 0;
-	mm_segment_t fs;
-	int segs;
-	int i;
-	size_t size;
-	struct vm_area_struct *vma;
-	struct elfhdr elf;
-	off_t offset = 0, dataoff;
-	int numnote = 3;
-	struct memelfnote notes[3];
-	struct elf_prstatus prstatus;	/* NT_PRSTATUS */
-	elf_fpregset_t fpu;		/* NT_PRFPREG */
-	struct elf_prpsinfo psinfo;	/* NT_PRPSINFO */
-
-	/* Count what's needed to dump, up to the limit of coredump size. */
-	segs = 0;
-	size = 0;
-	for (vma = current->mm->mmap; vma != NULL; vma = vma->vm_next) {
-		if (maydump(vma))
-		{
-			int sz = vma->vm_end-vma->vm_start;
-
-			if (size+sz >= limit)
-				break;
-			else
-				size += sz;
-		}
-
-		segs++;
-	}
-	pr_debug("irix_core_dump: %d segs taking %d bytes\n", segs, size);
-
-	/* Set up header. */
-	memcpy(elf.e_ident, ELFMAG, SELFMAG);
-	elf.e_ident[EI_CLASS] = ELFCLASS32;
-	elf.e_ident[EI_DATA] = ELFDATA2LSB;
-	elf.e_ident[EI_VERSION] = EV_CURRENT;
-	elf.e_ident[EI_OSABI] = ELF_OSABI;
-	memset(elf.e_ident+EI_PAD, 0, EI_NIDENT-EI_PAD);
-
-	elf.e_type = ET_CORE;
-	elf.e_machine = ELF_ARCH;
-	elf.e_version = EV_CURRENT;
-	elf.e_entry = 0;
-	elf.e_phoff = sizeof(elf);
-	elf.e_shoff = 0;
-	elf.e_flags = 0;
-	elf.e_ehsize = sizeof(elf);
-	elf.e_phentsize = sizeof(struct elf_phdr);
-	elf.e_phnum = segs+1;		/* Include notes. */
-	elf.e_shentsize = 0;
-	elf.e_shnum = 0;
-	elf.e_shstrndx = 0;
-
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-
-	has_dumped = 1;
-	current->flags |= PF_DUMPCORE;
-
-	DUMP_WRITE(&elf, sizeof(elf));
-	offset += sizeof(elf);				/* Elf header. */
-	offset += (segs+1) * sizeof(struct elf_phdr);	/* Program headers. */
-
-	/* Set up the notes in similar form to SVR4 core dumps made
-	 * with info from their /proc.
-	 */
-	memset(&psinfo, 0, sizeof(psinfo));
-	memset(&prstatus, 0, sizeof(prstatus));
-
-	notes[0].name = "CORE";
-	notes[0].type = NT_PRSTATUS;
-	notes[0].datasz = sizeof(prstatus);
-	notes[0].data = &prstatus;
-	prstatus.pr_info.si_signo = prstatus.pr_cursig = signr;
-	prstatus.pr_sigpend = current->pending.signal.sig[0];
-	prstatus.pr_sighold = current->blocked.sig[0];
-	psinfo.pr_pid = prstatus.pr_pid = task_pid_vnr(current);
-	psinfo.pr_ppid = prstatus.pr_ppid = task_pid_vnr(current->parent);
-	psinfo.pr_pgrp = prstatus.pr_pgrp = task_pgrp_vnr(current);
-	psinfo.pr_sid = prstatus.pr_sid = task_session_vnr(current);
-	if (thread_group_leader(current)) {
-		/*
-		 * This is the record for the group leader.  Add in the
-		 * cumulative times of previous dead threads.  This total
-		 * won't include the time of each live thread whose state
-		 * is included in the core dump.  The final total reported
-		 * to our parent process when it calls wait4 will include
-		 * those sums as well as the little bit more time it takes
-		 * this and each other thread to finish dying after the
-		 * core dump synchronization phase.
-		 */
-		jiffies_to_timeval(current->utime + current->signal->utime,
-		                   &prstatus.pr_utime);
-		jiffies_to_timeval(current->stime + current->signal->stime,
-		                   &prstatus.pr_stime);
-	} else {
-		jiffies_to_timeval(current->utime, &prstatus.pr_utime);
-		jiffies_to_timeval(current->stime, &prstatus.pr_stime);
-	}
-	jiffies_to_timeval(current->signal->cutime, &prstatus.pr_cutime);
-	jiffies_to_timeval(current->signal->cstime, &prstatus.pr_cstime);
-
-	if (sizeof(elf_gregset_t) != sizeof(struct pt_regs)) {
-		printk("sizeof(elf_gregset_t) (%d) != sizeof(struct pt_regs) "
-		       "(%d)\n", sizeof(elf_gregset_t), sizeof(struct pt_regs));
-	} else {
-		*(struct pt_regs *)&prstatus.pr_reg = *regs;
-	}
-
-	notes[1].name = "CORE";
-	notes[1].type = NT_PRPSINFO;
-	notes[1].datasz = sizeof(psinfo);
-	notes[1].data = &psinfo;
-	i = current->state ? ffz(~current->state) + 1 : 0;
-	psinfo.pr_state = i;
-	psinfo.pr_sname = (i < 0 || i > 5) ? '.' : "RSDZTD"[i];
-	psinfo.pr_zomb = psinfo.pr_sname == 'Z';
-	psinfo.pr_nice = task_nice(current);
-	psinfo.pr_flag = current->flags;
-	psinfo.pr_uid = current->uid;
-	psinfo.pr_gid = current->gid;
-	{
-		int i, len;
-
-		set_fs(fs);
-
-		len = current->mm->arg_end - current->mm->arg_start;
-		len = len >= ELF_PRARGSZ ? ELF_PRARGSZ : len;
-		(void *) copy_from_user(&psinfo.pr_psargs,
-			       (const char __user *)current->mm->arg_start, len);
-		for (i = 0; i < len; i++)
-			if (psinfo.pr_psargs[i] == 0)
-				psinfo.pr_psargs[i] = ' ';
-		psinfo.pr_psargs[len] = 0;
-
-		set_fs(KERNEL_DS);
-	}
-	strlcpy(psinfo.pr_fname, current->comm, sizeof(psinfo.pr_fname));
-
-	/* Try to dump the FPU. */
-	prstatus.pr_fpvalid = dump_fpu(regs, &fpu);
-	if (!prstatus.pr_fpvalid) {
-		numnote--;
-	} else {
-		notes[2].name = "CORE";
-		notes[2].type = NT_PRFPREG;
-		notes[2].datasz = sizeof(fpu);
-		notes[2].data = &fpu;
-	}
-
-	/* Write notes phdr entry. */
-	{
-		struct elf_phdr phdr;
-		int sz = 0;
-
-		for (i = 0; i < numnote; i++)
-			sz += notesize(&notes[i]);
-
-		phdr.p_type = PT_NOTE;
-		phdr.p_offset = offset;
-		phdr.p_vaddr = 0;
-		phdr.p_paddr = 0;
-		phdr.p_filesz = sz;
-		phdr.p_memsz = 0;
-		phdr.p_flags = 0;
-		phdr.p_align = 0;
-
-		offset += phdr.p_filesz;
-		DUMP_WRITE(&phdr, sizeof(phdr));
-	}
-
-	/* Page-align dumped data. */
-	dataoff = offset = roundup(offset, PAGE_SIZE);
-
-	/* Write program headers for segments dump. */
-	for (vma = current->mm->mmap, i = 0;
-		i < segs && vma != NULL; vma = vma->vm_next) {
-		struct elf_phdr phdr;
-		size_t sz;
-
-		i++;
-
-		sz = vma->vm_end - vma->vm_start;
-
-		phdr.p_type = PT_LOAD;
-		phdr.p_offset = offset;
-		phdr.p_vaddr = vma->vm_start;
-		phdr.p_paddr = 0;
-		phdr.p_filesz = maydump(vma) ? sz : 0;
-		phdr.p_memsz = sz;
-		offset += phdr.p_filesz;
-		phdr.p_flags = vma->vm_flags & VM_READ ? PF_R : 0;
-		if (vma->vm_flags & VM_WRITE)
-			phdr.p_flags |= PF_W;
-		if (vma->vm_flags & VM_EXEC)
-			phdr.p_flags |= PF_X;
-		phdr.p_align = PAGE_SIZE;
-
-		DUMP_WRITE(&phdr, sizeof(phdr));
-	}
-
-	for (i = 0; i < numnote; i++)
-		if (!writenote(&notes[i], file))
-			goto end_coredump;
-
-	set_fs(fs);
-
-	DUMP_SEEK(dataoff);
-
-	for (i = 0, vma = current->mm->mmap;
-	    i < segs && vma != NULL;
-	    vma = vma->vm_next) {
-		unsigned long addr = vma->vm_start;
-		unsigned long len = vma->vm_end - vma->vm_start;
-
-		if (!maydump(vma))
-			continue;
-		i++;
-		pr_debug("elf_core_dump: writing %08lx %lx\n", addr, len);
-		DUMP_WRITE((void __user *)addr, len);
-	}
-
-	if ((off_t) file->f_pos != offset) {
-		/* Sanity check. */
-		printk("elf_core_dump: file->f_pos (%ld) != offset (%ld)\n",
-		       (off_t) file->f_pos, offset);
-	}
-
-end_coredump:
-	set_fs(fs);
-	return has_dumped;
-}
-
-static int __init init_irix_binfmt(void)
-{
-	extern int init_inventory(void);
-	extern asmlinkage unsigned long sys_call_table;
-	extern asmlinkage unsigned long sys_call_table_irix5;
-
-	init_inventory();
-
-	/*
-	 * Copy the IRIX5 syscall table (8000 bytes) into the main syscall
-	 * table. The IRIX5 calls are located by an offset of 8000 bytes
-	 * from the beginning of the main table.
-	 */
-	memcpy((void *) ((unsigned long) &sys_call_table + 8000),
-		&sys_call_table_irix5, 8000);
-
-	return register_binfmt(&irix_format);
-}
-
-static void __exit exit_irix_binfmt(void)
-{
-	/*
-	 * Remove the Irix ELF loader.
-	 */
-	unregister_binfmt(&irix_format);
-}
-
-module_init(init_irix_binfmt)
-module_exit(exit_irix_binfmt)
diff --git a/arch/mips/kernel/irixinv.c b/arch/mips/kernel/irixinv.c
deleted file mode 100644
index cf2dcd3d6a93..000000000000
--- a/arch/mips/kernel/irixinv.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Support the inventory interface for IRIX binaries
- * This is invoked before the mm layer is working, so we do not
- * use the linked lists for the inventory yet.
- *
- * Miguel de Icaza, 1997.
- */
-#include <linux/mm.h>
-#include <asm/inventory.h>
-#include <asm/uaccess.h>
-
-#define MAX_INVENTORY 50
-int inventory_items = 0;
-
-static inventory_t inventory [MAX_INVENTORY];
-
-void add_to_inventory(int class, int type, int controller, int unit, int state)
-{
-	inventory_t *ni = &inventory [inventory_items];
-
-	if (inventory_items == MAX_INVENTORY)
-		return;
-
-	ni->inv_class      = class;
-	ni->inv_type       = type;
-	ni->inv_controller = controller;
-	ni->inv_unit       = unit;
-	ni->inv_state      = state;
-	ni->inv_next       = ni;
-	inventory_items++;
-}
-
-int dump_inventory_to_user(void __user *userbuf, int size)
-{
-	inventory_t *inv  = &inventory [0];
-	inventory_t __user *user = userbuf;
-	int v;
-
-	if (!access_ok(VERIFY_WRITE, userbuf, size))
-		return -EFAULT;
-
-	for (v = 0; v < inventory_items; v++){
-		inv = &inventory [v];
-		if (copy_to_user (user, inv, sizeof (inventory_t)))
-			return -EFAULT;
-		user++;
-	}
-	return inventory_items * sizeof(inventory_t);
-}
-
-int __init init_inventory(void)
-{
-	/*
-	 * gross hack while we put the right bits all over the kernel
-	 * most likely this will not let just anyone run the X server
-	 * until we put the right values all over the place
-	 */
-	add_to_inventory(10, 3, 0, 0, 16400);
-	add_to_inventory(1, 1, 150, -1, 12);
-	add_to_inventory(1, 3, 0, 0, 8976);
-	add_to_inventory(1, 2, 0, 0, 8976);
-	add_to_inventory(4, 8, 0, 0, 2);
-	add_to_inventory(5, 5, 0, 0, 1);
-	add_to_inventory(3, 3, 0, 0, 32768);
-	add_to_inventory(3, 4, 0, 0, 32768);
-	add_to_inventory(3, 8, 0, 0, 524288);
-	add_to_inventory(3, 9, 0, 0, 64);
-	add_to_inventory(3, 1, 0, 0, 67108864);
-	add_to_inventory(12, 3, 0, 0, 16);
-	add_to_inventory(8, 7, 17, 0, 16777472);
-	add_to_inventory(8, 0, 0, 0, 1);
-	add_to_inventory(2, 1, 0, 13, 2);
-	add_to_inventory(2, 2, 0, 2, 0);
-	add_to_inventory(2, 2, 0, 1, 0);
-	add_to_inventory(7, 14, 0, 0, 6);
-
-	return 0;
-}
diff --git a/arch/mips/kernel/irixioctl.c b/arch/mips/kernel/irixioctl.c
deleted file mode 100644
index b39bdba82e02..000000000000
--- a/arch/mips/kernel/irixioctl.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * irixioctl.c: A fucking mess...
- *
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/sockios.h>
-#include <linux/syscalls.h>
-#include <linux/tty.h>
-#include <linux/file.h>
-#include <linux/rcupdate.h>
-
-#include <asm/uaccess.h>
-#include <asm/ioctl.h>
-#include <asm/ioctls.h>
-
-#undef DEBUG_IOCTLS
-#undef DEBUG_MISSING_IOCTL
-
-struct irix_termios {
-	tcflag_t c_iflag, c_oflag, c_cflag, c_lflag;
-	cc_t c_cc[NCCS];
-};
-
-asmlinkage int irix_ioctl(int fd, unsigned long cmd, unsigned long arg)
-{
-	struct tty_struct *tp, *rtp;
-	mm_segment_t old_fs;
-	int i, error = 0;
-
-#ifdef DEBUG_IOCTLS
-	printk("[%s:%d] irix_ioctl(%d, ", current->comm, current->pid, fd);
-#endif
-	switch(cmd) {
-	case 0x00005401:
-#ifdef DEBUG_IOCTLS
-		printk("TCGETA, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TCGETA, arg);
-		break;
-
-	case 0x0000540d: {
-		struct termios kt;
-		struct irix_termios __user *it =
-			(struct irix_termios __user *) arg;
-
-#ifdef DEBUG_IOCTLS
-		printk("TCGETS, %08lx) ", arg);
-#endif
-		if (!access_ok(VERIFY_WRITE, it, sizeof(*it))) {
-			error = -EFAULT;
-			break;
-		}
-		old_fs = get_fs(); set_fs(get_ds());
-		error = sys_ioctl(fd, TCGETS, (unsigned long) &kt);
-		set_fs(old_fs);
-		if (error)
-			break;
-
-		error = __put_user(kt.c_iflag, &it->c_iflag);
-		error |= __put_user(kt.c_oflag, &it->c_oflag);
-		error |= __put_user(kt.c_cflag, &it->c_cflag);
-		error |= __put_user(kt.c_lflag, &it->c_lflag);
-
-		for (i = 0; i < NCCS; i++)
-			error |= __put_user(kt.c_cc[i], &it->c_cc[i]);
-		break;
-	}
-
-	case 0x0000540e: {
-		struct termios kt;
-		struct irix_termios *it = (struct irix_termios *) arg;
-
-#ifdef DEBUG_IOCTLS
-		printk("TCSETS, %08lx) ", arg);
-#endif
-		if (!access_ok(VERIFY_READ, it, sizeof(*it))) {
-			error = -EFAULT;
-			break;
-		}
-		old_fs = get_fs(); set_fs(get_ds());
-		error = sys_ioctl(fd, TCGETS, (unsigned long) &kt);
-		set_fs(old_fs);
-		if (error)
-			break;
-
-		error = __get_user(kt.c_iflag, &it->c_iflag);
-		error |= __get_user(kt.c_oflag, &it->c_oflag);
-		error |= __get_user(kt.c_cflag, &it->c_cflag);
-		error |= __get_user(kt.c_lflag, &it->c_lflag);
-
-		for (i = 0; i < NCCS; i++)
-			error |= __get_user(kt.c_cc[i], &it->c_cc[i]);
-
-		if (error)
-			break;
-		old_fs = get_fs(); set_fs(get_ds());
-		error = sys_ioctl(fd, TCSETS, (unsigned long) &kt);
-		set_fs(old_fs);
-		break;
-	}
-
-	case 0x0000540f:
-#ifdef DEBUG_IOCTLS
-		printk("TCSETSW, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TCSETSW, arg);
-		break;
-
-	case 0x00005471:
-#ifdef DEBUG_IOCTLS
-		printk("TIOCNOTTY, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TIOCNOTTY, arg);
-		break;
-
-	case 0x00007416: {
-		pid_t pid;
-#ifdef DEBUG_IOCTLS
-		printk("TIOCGSID, %08lx) ", arg);
-#endif
-		old_fs = get_fs(); set_fs(get_ds());
-		error = sys_ioctl(fd, TIOCGSID, (unsigned long)&pid);
-		set_fs(old_fs);
-		if (!error)
-			error = put_user(pid, (unsigned long __user *) arg);
-		break;
-	}
-	case 0x746e:
-		/* TIOCSTART, same effect as hitting ^Q */
-#ifdef DEBUG_IOCTLS
-		printk("TIOCSTART, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TCXONC, TCOON);
-		break;
-
-	case 0x20006968:
-#ifdef DEBUG_IOCTLS
-		printk("SIOCGETLABEL, %08lx) ", arg);
-#endif
-		error = -ENOPKG;
-		break;
-
-	case 0x40047477:
-#ifdef DEBUG_IOCTLS
-		printk("TIOCGPGRP, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TIOCGPGRP, arg);
-#ifdef DEBUG_IOCTLS
-		printk("arg=%d ", *(int *)arg);
-#endif
-		break;
-
-	case 0x40087468:
-#ifdef DEBUG_IOCTLS
-		printk("TIOCGWINSZ, %08lx) ", arg);
-#endif
-		error = sys_ioctl(fd, TIOCGWINSZ, arg);
-		break;
-
-	case 0x8004667e:
-		error = sys_ioctl(fd, FIONBIO, arg);
-		break;
-
-	case 0x80047476:
-		error = sys_ioctl(fd, TIOCSPGRP, arg);
-		break;
-
-	case 0x8020690c:
-		error = sys_ioctl(fd, SIOCSIFADDR, arg);
-		break;
-
-	case 0x80206910:
-		error = sys_ioctl(fd, SIOCSIFFLAGS, arg);
-		break;
-
-	case 0xc0206911:
-		error = sys_ioctl(fd, SIOCGIFFLAGS, arg);
-		break;
-
-	case 0xc020691b:
-		error = sys_ioctl(fd, SIOCGIFMETRIC, arg);
-		break;
-
-	default: {
-#ifdef DEBUG_MISSING_IOCTL
-		char *msg = "Unimplemented IOCTL cmd tell linux-mips@linux-mips.org\n";
-
-#ifdef DEBUG_IOCTLS
-		printk("UNIMP_IOCTL, %08lx)\n", arg);
-#endif
-		old_fs = get_fs(); set_fs(get_ds());
-		sys_write(2, msg, strlen(msg));
-		set_fs(old_fs);
-		printk("[%s:%d] Does unimplemented IRIX ioctl cmd %08lx\n",
-		       current->comm, current->pid, cmd);
-		do_exit(255);
-#else
-		error = sys_ioctl(fd, cmd, arg);
-#endif
-	}
-
-	};
-#ifdef DEBUG_IOCTLS
-	printk("error=%d\n", error);
-#endif
-	return error;
-}
diff --git a/arch/mips/kernel/irixsig.c b/arch/mips/kernel/irixsig.c
deleted file mode 100644
index 0215c805a592..000000000000
--- a/arch/mips/kernel/irixsig.c
+++ /dev/null
@@ -1,888 +0,0 @@
-/*
- * irixsig.c: WHEEE, IRIX signals!  YOW, am I compatible or what?!?!
- *
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
- * Copyright (C) 1997 - 2000 Ralf Baechle (ralf@gnu.org)
- * Copyright (C) 2000 Silicon Graphics, Inc.
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <linux/time.h>
-#include <linux/ptrace.h>
-#include <linux/resource.h>
-
-#include <asm/ptrace.h>
-#include <asm/uaccess.h>
-#include <asm/unistd.h>
-
-#undef DEBUG_SIG
-
-#define _S(nr) (1<<((nr)-1))
-
-#define _BLOCKABLE (~(_S(SIGKILL) | _S(SIGSTOP)))
-
-#define _IRIX_NSIG		128
-#define _IRIX_NSIG_BPW		BITS_PER_LONG
-#define _IRIX_NSIG_WORDS	(_IRIX_NSIG / _IRIX_NSIG_BPW)
-
-typedef struct {
-	unsigned long sig[_IRIX_NSIG_WORDS];
-} irix_sigset_t;
-
-struct sigctx_irix5 {
-	u32 rmask, cp0_status;
-	u64 pc;
-	u64 regs[32];
-	u64 fpregs[32];
-	u32 usedfp, fpcsr, fpeir, sstk_flags;
-	u64 hi, lo;
-	u64 cp0_cause, cp0_badvaddr, _unused0;
-	irix_sigset_t sigset;
-	u64 weird_fpu_thing;
-	u64 _unused1[31];
-};
-
-#ifdef DEBUG_SIG
-/* Debugging */
-static inline void dump_irix5_sigctx(struct sigctx_irix5 *c)
-{
-	int i;
-
-	printk("misc: rmask[%08lx] status[%08lx] pc[%08lx]\n",
-	       (unsigned long) c->rmask,
-	       (unsigned long) c->cp0_status,
-	       (unsigned long) c->pc);
-	printk("regs: ");
-	for(i = 0; i < 16; i++)
-		printk("[%d]<%08lx> ", i, (unsigned long) c->regs[i]);
-	printk("\nregs: ");
-	for(i = 16; i < 32; i++)
-		printk("[%d]<%08lx> ", i, (unsigned long) c->regs[i]);
-	printk("\nfpregs: ");
-	for(i = 0; i < 16; i++)
-		printk("[%d]<%08lx> ", i, (unsigned long) c->fpregs[i]);
-	printk("\nfpregs: ");
-	for(i = 16; i < 32; i++)
-		printk("[%d]<%08lx> ", i, (unsigned long) c->fpregs[i]);
-	printk("misc: usedfp[%d] fpcsr[%08lx] fpeir[%08lx] stk_flgs[%08lx]\n",
-	       (int) c->usedfp, (unsigned long) c->fpcsr,
-	       (unsigned long) c->fpeir, (unsigned long) c->sstk_flags);
-	printk("misc: hi[%08lx] lo[%08lx] cause[%08lx] badvaddr[%08lx]\n",
-	       (unsigned long) c->hi, (unsigned long) c->lo,
-	       (unsigned long) c->cp0_cause, (unsigned long) c->cp0_badvaddr);
-	printk("misc: sigset<0>[%08lx] sigset<1>[%08lx] sigset<2>[%08lx] "
-	       "sigset<3>[%08lx]\n", (unsigned long) c->sigset.sig[0],
-	       (unsigned long) c->sigset.sig[1],
-	       (unsigned long) c->sigset.sig[2],
-	       (unsigned long) c->sigset.sig[3]);
-}
-#endif
-
-static int setup_irix_frame(struct k_sigaction *ka, struct pt_regs *regs,
-			    int signr, sigset_t *oldmask)
-{
-	struct sigctx_irix5 __user *ctx;
-	unsigned long sp;
-	int error, i;
-
-	sp = regs->regs[29];
-	sp -= sizeof(struct sigctx_irix5);
-	sp &= ~(0xf);
-	ctx = (struct sigctx_irix5 __user *) sp;
-	if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)))
-		goto segv_and_exit;
-
-	error = __put_user(0, &ctx->weird_fpu_thing);
-	error |= __put_user(~(0x00000001), &ctx->rmask);
-	error |= __put_user(0, &ctx->regs[0]);
-	for(i = 1; i < 32; i++)
-		error |= __put_user((u64) regs->regs[i], &ctx->regs[i]);
-
-	error |= __put_user((u64) regs->hi, &ctx->hi);
-	error |= __put_user((u64) regs->lo, &ctx->lo);
-	error |= __put_user((u64) regs->cp0_epc, &ctx->pc);
-	error |= __put_user(!!used_math(), &ctx->usedfp);
-	error |= __put_user((u64) regs->cp0_cause, &ctx->cp0_cause);
-	error |= __put_user((u64) regs->cp0_badvaddr, &ctx->cp0_badvaddr);
-
-	error |= __put_user(0, &ctx->sstk_flags); /* XXX sigstack unimp... todo... */
-
-	error |= __copy_to_user(&ctx->sigset, oldmask, sizeof(irix_sigset_t)) ? -EFAULT : 0;
-
-	if (error)
-		goto segv_and_exit;
-
-#ifdef DEBUG_SIG
-	dump_irix5_sigctx(ctx);
-#endif
-
-	regs->regs[4] = (unsigned long) signr;
-	regs->regs[5] = 0; /* XXX sigcode XXX */
-	regs->regs[6] = regs->regs[29] = sp;
-	regs->regs[7] = (unsigned long) ka->sa.sa_handler;
-	regs->regs[25] = regs->cp0_epc = (unsigned long) ka->sa_restorer;
-
-	return 1;
-
-segv_and_exit:
-	force_sigsegv(signr, current);
-	return 0;
-}
-
-static int inline
-setup_irix_rt_frame(struct k_sigaction * ka, struct pt_regs *regs,
-               int signr, sigset_t *oldmask, siginfo_t *info)
-{
-	printk("Aiee: setup_tr_frame wants to be written");
-	do_exit(SIGSEGV);
-}
-
-static inline int handle_signal(unsigned long sig, siginfo_t *info,
-	struct k_sigaction *ka, sigset_t *oldset, struct pt_regs * regs)
-{
-	int ret;
-
-	switch(regs->regs[0]) {
-	case ERESTARTNOHAND:
-		regs->regs[2] = EINTR;
-		break;
-	case ERESTARTSYS:
-		if(!(ka->sa.sa_flags & SA_RESTART)) {
-			regs->regs[2] = EINTR;
-			break;
-		}
-	/* fallthrough */
-	case ERESTARTNOINTR:		/* Userland will reload $v0.  */
-		regs->cp0_epc -= 8;
-	}
-
-	regs->regs[0] = 0;		/* Don't deal with this again.  */
-
-	if (ka->sa.sa_flags & SA_SIGINFO)
-		ret = setup_irix_rt_frame(ka, regs, sig, oldset, info);
-	else
-		ret = setup_irix_frame(ka, regs, sig, oldset);
-
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked, &current->blocked, &ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked, sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	return ret;
-}
-
-void do_irix_signal(struct pt_regs *regs)
-{
-	struct k_sigaction ka;
-	siginfo_t info;
-	int signr;
-	sigset_t *oldset;
-
-	/*
-	 * We want the common case to go fast, which is why we may in certain
-	 * cases get here from kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return;
-
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
-		oldset = &current->saved_sigmask;
-	else
-		oldset = &current->blocked;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		/* Whee!  Actually deliver the signal.  */
-		if (handle_signal(signr, &info, &ka, oldset, regs) == 0) {
-			/* a signal was successfully delivered; the saved
-			 * sigmask will have been stored in the signal frame,
-			 * and will be restored by sigreturn, so we can simply
-			 * clear the TIF_RESTORE_SIGMASK flag */
-			if (test_thread_flag(TIF_RESTORE_SIGMASK))
-				clear_thread_flag(TIF_RESTORE_SIGMASK);
-		}
-
-		return;
-	}
-
-	/*
-	 * Who's code doesn't conform to the restartable syscall convention
-	 * dies here!!!  The li instruction, a single machine instruction,
-	 * must directly be followed by the syscall instruction.
-	 */
-	if (regs->regs[0]) {
-		if (regs->regs[2] == ERESTARTNOHAND ||
-		    regs->regs[2] == ERESTARTSYS ||
-		    regs->regs[2] == ERESTARTNOINTR) {
-			regs->cp0_epc -= 8;
-		}
-		if (regs->regs[2] == ERESTART_RESTARTBLOCK) {
-			regs->regs[2] = __NR_restart_syscall;
-			regs->regs[7] = regs->regs[26];
-			regs->cp0_epc -= 4;
-		}
-		regs->regs[0] = 0;	/* Don't deal with this again.  */
-	}
-
-	/*
-	* If there's no signal to deliver, we just put the saved sigmask
-	* back
-	*/
-	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-		clear_thread_flag(TIF_RESTORE_SIGMASK);
-		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-	}
-}
-
-asmlinkage void
-irix_sigreturn(struct pt_regs *regs)
-{
-	struct sigctx_irix5 __user *context, *magic;
-	unsigned long umask, mask;
-	u64 *fregs;
-	u32 usedfp;
-	int error, sig, i, base = 0;
-	sigset_t blocked;
-
-	/* Always make any pending restarted system calls return -EINTR */
-	current_thread_info()->restart_block.fn = do_no_restart_syscall;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-
-	context = (struct sigctx_irix5 __user *) regs->regs[base + 4];
-	magic = (struct sigctx_irix5 __user *) regs->regs[base + 5];
-	sig = (int) regs->regs[base + 6];
-#ifdef DEBUG_SIG
-	printk("[%s:%d] IRIX sigreturn(scp[%p],ucp[%p],sig[%d])\n",
-	       current->comm, current->pid, context, magic, sig);
-#endif
-	if (!context)
-		context = magic;
-	if (!access_ok(VERIFY_READ, context, sizeof(struct sigctx_irix5)))
-		goto badframe;
-
-#ifdef DEBUG_SIG
-	dump_irix5_sigctx(context);
-#endif
-
-	error = __get_user(regs->cp0_epc, &context->pc);
-	error |= __get_user(umask, &context->rmask);
-
-	mask = 2;
-	for (i = 1; i < 32; i++, mask <<= 1) {
-		if (umask & mask)
-			error |= __get_user(regs->regs[i], &context->regs[i]);
-	}
-	error |= __get_user(regs->hi, &context->hi);
-	error |= __get_user(regs->lo, &context->lo);
-
-	error |= __get_user(usedfp, &context->usedfp);
-	if ((umask & 1) && usedfp) {
-		fregs = (u64 *) &current->thread.fpu;
-
-		for(i = 0; i < 32; i++)
-			error |= __get_user(fregs[i], &context->fpregs[i]);
-		error |= __get_user(current->thread.fpu.fcr31, &context->fpcsr);
-	}
-
-	/* XXX do sigstack crapola here... XXX */
-
-	error |= __copy_from_user(&blocked, &context->sigset, sizeof(blocked)) ? -EFAULT : 0;
-
-	if (error)
-		goto badframe;
-
-	sigdelsetmask(&blocked, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = blocked;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	/*
-	 * Don't let your children do this ...
-	 */
-	__asm__ __volatile__(
-		"move\t$29,%0\n\t"
-		"j\tsyscall_exit"
-		:/* no outputs */
-		:"r" (&regs));
-		/* Unreached */
-
-badframe:
-	force_sig(SIGSEGV, current);
-}
-
-struct sigact_irix5 {
-	int flags;
-	void (*handler)(int);
-	u32 sigset[4];
-	int _unused0[2];
-};
-
-#define SIG_SETMASK32	256	/* Goodie from SGI for BSD compatibility:
-				   set only the low 32 bit of the sigset.  */
-
-#ifdef DEBUG_SIG
-static inline void dump_sigact_irix5(struct sigact_irix5 *p)
-{
-	printk("<f[%d] hndlr[%08lx] msk[%08lx]>", p->flags,
-	       (unsigned long) p->handler,
-	       (unsigned long) p->sigset[0]);
-}
-#endif
-
-asmlinkage int
-irix_sigaction(int sig, const struct sigaction __user *act,
-	      struct sigaction __user *oact, void __user *trampoline)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-#ifdef DEBUG_SIG
-	printk(" (%d,%s,%s,%08lx) ", sig, (!new ? "0" : "NEW"),
-	       (!old ? "0" : "OLD"), trampoline);
-	if(new) {
-		dump_sigact_irix5(new); printk(" ");
-	}
-#endif
-	if (act) {
-		sigset_t mask;
-		int err;
-
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)))
-			return -EFAULT;
-		err = __get_user(new_ka.sa.sa_handler, &act->sa_handler);
-		err |= __get_user(new_ka.sa.sa_flags, &act->sa_flags);
-
-		err |= __copy_from_user(&mask, &act->sa_mask, sizeof(sigset_t)) ? -EFAULT : 0;
-		if (err)
-			return err;
-
-		/*
-		 * Hmmm... methinks IRIX libc always passes a valid trampoline
-		 * value for all invocations of sigaction.  Will have to
-		 * investigate.  POSIX POSIX, die die die...
-		 */
-		new_ka.sa_restorer = trampoline;
-	}
-
-/* XXX Implement SIG_SETMASK32 for IRIX compatibility */
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		int err;
-
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)))
-			return -EFAULT;
-
-		err = __put_user(old_ka.sa.sa_handler, &oact->sa_handler);
-		err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		err |= __copy_to_user(&oact->sa_mask, &old_ka.sa.sa_mask,
-		               sizeof(sigset_t)) ? -EFAULT : 0;
-		if (err)
-			return -EFAULT;
-	}
-
-	return ret;
-}
-
-asmlinkage int irix_sigpending(irix_sigset_t __user *set)
-{
-	return do_sigpending(set, sizeof(*set));
-}
-
-asmlinkage int irix_sigprocmask(int how, irix_sigset_t __user *new,
-	irix_sigset_t __user *old)
-{
-	sigset_t oldbits, newbits;
-
-	if (new) {
-		if (!access_ok(VERIFY_READ, new, sizeof(*new)))
-			return -EFAULT;
-		if (__copy_from_user(&newbits, new, sizeof(unsigned long)*4))
-			return -EFAULT;
-		sigdelsetmask(&newbits, ~_BLOCKABLE);
-
-		spin_lock_irq(&current->sighand->siglock);
-		oldbits = current->blocked;
-
-		switch(how) {
-		case 1:
-			sigorsets(&newbits, &oldbits, &newbits);
-			break;
-
-		case 2:
-			sigandsets(&newbits, &oldbits, &newbits);
-			break;
-
-		case 3:
-			break;
-
-		case 256:
-			siginitset(&newbits, newbits.sig[0]);
-			break;
-
-		default:
-			spin_unlock_irq(&current->sighand->siglock);
-			return -EINVAL;
-		}
-		recalc_sigpending();
-		spin_unlock_irq(&current->sighand->siglock);
-	}
-	if (old)
-		return copy_to_user(old, &current->blocked,
-		                  sizeof(unsigned long)*4) ? -EFAULT : 0;
-
-	return 0;
-}
-
-asmlinkage int irix_sigsuspend(struct pt_regs *regs)
-{
-	sigset_t newset;
-	sigset_t __user *uset;
-
-	uset = (sigset_t __user *) regs->regs[4];
-	if (copy_from_user(&newset, uset, sizeof(sigset_t)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-
-	spin_lock_irq(&current->sighand->siglock);
-	current->saved_sigmask = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-	set_thread_flag(TIF_RESTORE_SIGMASK);
-	return -ERESTARTNOHAND;
-}
-
-/* hate hate hate... */
-struct irix5_siginfo {
-	int sig, code, error;
-	union {
-		char unused[128 - (3 * 4)]; /* Safety net. */
-		struct {
-			int pid;
-			union {
-				int uid;
-				struct {
-					int utime, status, stime;
-				} child;
-			} procdata;
-		} procinfo;
-
-		unsigned long fault_addr;
-
-		struct {
-			int fd;
-			long band;
-		} fileinfo;
-
-		unsigned long sigval;
-	} stuff;
-};
-
-asmlinkage int irix_sigpoll_sys(unsigned long __user *set,
-	struct irix5_siginfo __user *info, struct timespec __user *tp)
-{
-	long expire = MAX_SCHEDULE_TIMEOUT;
-	sigset_t kset;
-	int i, sig, error, timeo = 0;
-	struct timespec ktp;
-
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_sigpoll_sys(%p,%p,%p)\n",
-	       current->comm, current->pid, set, info, tp);
-#endif
-
-	/* Must always specify the signal set. */
-	if (!set)
-		return -EINVAL;
-
-	if (copy_from_user(&kset, set, sizeof(set)))
-		return -EFAULT;
-
-	if (info && clear_user(info, sizeof(*info))) {
-		error = -EFAULT;
-		goto out;
-	}
-
-	if (tp) {
-		if (copy_from_user(&ktp, tp, sizeof(*tp)))
-			return -EFAULT;
-
-		if (!ktp.tv_sec && !ktp.tv_nsec)
-			return -EINVAL;
-
-		expire = timespec_to_jiffies(&ktp) +
-		         (ktp.tv_sec || ktp.tv_nsec);
-	}
-
-	while(1) {
-		long tmp = 0;
-
-		expire = schedule_timeout_interruptible(expire);
-
-		for (i=0; i < _IRIX_NSIG_WORDS; i++)
-			tmp |= (current->pending.signal.sig[i] & kset.sig[i]);
-
-		if (tmp)
-			break;
-		if (!expire) {
-			timeo = 1;
-			break;
-		}
-		if (signal_pending(current))
-			return -EINTR;
-	}
-	if (timeo)
-		return -EAGAIN;
-
-	for (sig = 1; i <= 65 /* IRIX_NSIG */; sig++) {
-		if (sigismember (&kset, sig))
-			continue;
-		if (sigismember (&current->pending.signal, sig)) {
-			/* XXX need more than this... */
-			if (info)
-				return copy_to_user(&info->sig, &sig, sizeof(sig));
-			return 0;
-		}
-	}
-
-	/* Should not get here, but do something sane if we do. */
-	error = -EINTR;
-
-out:
-	return error;
-}
-
-/* This is here because of irix5_siginfo definition. */
-#define IRIX_P_PID    0
-#define IRIX_P_PGID   2
-#define IRIX_P_ALL    7
-
-#define W_EXITED     1
-#define W_TRAPPED    2
-#define W_STOPPED    4
-#define W_CONT       8
-#define W_NOHANG    64
-
-#define W_MASK      (W_EXITED | W_TRAPPED | W_STOPPED | W_CONT | W_NOHANG)
-
-asmlinkage int irix_waitsys(int type, int upid,
-	struct irix5_siginfo __user *info, int options,
-	struct rusage __user *ru)
-{
-	struct pid *pid = NULL;
-	int flag, retval;
-	DECLARE_WAITQUEUE(wait, current);
-	struct task_struct *tsk;
-	struct task_struct *p;
-	struct list_head *_p;
-
-	if (!info)
-		return -EINVAL;
-
-	if (!access_ok(VERIFY_WRITE, info, sizeof(*info)))
-		return -EFAULT;
-
-	if (ru)
-		if (!access_ok(VERIFY_WRITE, ru, sizeof(*ru)))
-			return -EFAULT;
-
-	if (options & ~W_MASK)
-		return -EINVAL;
-
-	if (type != IRIX_P_PID && type != IRIX_P_PGID && type != IRIX_P_ALL)
-		return -EINVAL;
-
-	if (type != IRIX_P_ALL)
-		pid = find_get_pid(upid);
-	add_wait_queue(&current->signal->wait_chldexit, &wait);
-repeat:
-	flag = 0;
-	current->state = TASK_INTERRUPTIBLE;
-	read_lock(&tasklist_lock);
-	tsk = current;
-	list_for_each(_p, &tsk->children) {
-		p = list_entry(_p, struct task_struct, sibling);
-		if ((type == IRIX_P_PID) && task_pid(p) != pid)
-			continue;
-		if ((type == IRIX_P_PGID) && task_pgrp(p) != pid)
-			continue;
-		if ((p->exit_signal != SIGCHLD))
-			continue;
-		flag = 1;
-		switch (p->state) {
-		case TASK_STOPPED:
-			if (!p->exit_code)
-				continue;
-			if (!(options & (W_TRAPPED|W_STOPPED)) &&
-			    !(p->ptrace & PT_PTRACED))
-				continue;
-			read_unlock(&tasklist_lock);
-
-			/* move to end of parent's list to avoid starvation */
-			write_lock_irq(&tasklist_lock);
-			remove_parent(p);
-			add_parent(p);
-			write_unlock_irq(&tasklist_lock);
-			retval = ru ? getrusage(p, RUSAGE_BOTH, ru) : 0;
-			if (retval)
-				goto end_waitsys;
-
-			retval = __put_user(SIGCHLD, &info->sig);
-			retval |= __put_user(0, &info->code);
-			retval |= __put_user(task_pid_vnr(p), &info->stuff.procinfo.pid);
-			retval |= __put_user((p->exit_code >> 8) & 0xff,
-			           &info->stuff.procinfo.procdata.child.status);
-			retval |= __put_user(p->utime, &info->stuff.procinfo.procdata.child.utime);
-			retval |= __put_user(p->stime, &info->stuff.procinfo.procdata.child.stime);
-			if (retval)
-				goto end_waitsys;
-
-			p->exit_code = 0;
-			goto end_waitsys;
-
-		case EXIT_ZOMBIE:
-			current->signal->cutime += p->utime + p->signal->cutime;
-			current->signal->cstime += p->stime + p->signal->cstime;
-			if (ru != NULL)
-				getrusage(p, RUSAGE_BOTH, ru);
-			retval = __put_user(SIGCHLD, &info->sig);
-			retval |= __put_user(1, &info->code);      /* CLD_EXITED */
-			retval |= __put_user(task_pid_vnr(p), &info->stuff.procinfo.pid);
-			retval |= __put_user((p->exit_code >> 8) & 0xff,
-			           &info->stuff.procinfo.procdata.child.status);
-			retval |= __put_user(p->utime,
-			           &info->stuff.procinfo.procdata.child.utime);
-			retval |= __put_user(p->stime,
-			           &info->stuff.procinfo.procdata.child.stime);
-			if (retval)
-				goto end_waitsys;
-
-			if (p->real_parent != p->parent) {
-				write_lock_irq(&tasklist_lock);
-				remove_parent(p);
-				p->parent = p->real_parent;
-				add_parent(p);
-				do_notify_parent(p, SIGCHLD);
-				write_unlock_irq(&tasklist_lock);
-			} else
-				release_task(p);
-			goto end_waitsys;
-		default:
-			continue;
-		}
-		tsk = next_thread(tsk);
-	}
-	read_unlock(&tasklist_lock);
-	if (flag) {
-		retval = 0;
-		if (options & W_NOHANG)
-			goto end_waitsys;
-		retval = -ERESTARTSYS;
-		if (signal_pending(current))
-			goto end_waitsys;
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		goto repeat;
-	}
-	retval = -ECHILD;
-end_waitsys:
-	current->state = TASK_RUNNING;
-	remove_wait_queue(&current->signal->wait_chldexit, &wait);
-	put_pid(pid);
-
-	return retval;
-}
-
-struct irix5_context {
-	u32 flags;
-	u32 link;
-	u32 sigmask[4];
-	struct { u32 sp, size, flags; } stack;
-	int regs[36];
-	u32 fpregs[32];
-	u32 fpcsr;
-	u32 _unused0;
-	u32 _unused1[47];
-	u32 weird_graphics_thing;
-};
-
-asmlinkage int irix_getcontext(struct pt_regs *regs)
-{
-	int error, i, base = 0;
-	struct irix5_context __user *ctx;
-	unsigned long flags;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-	ctx = (struct irix5_context __user *) regs->regs[base + 4];
-
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_getcontext(%p)\n",
-	       current->comm, current->pid, ctx);
-#endif
-
-	if (!access_ok(VERIFY_WRITE, ctx, sizeof(*ctx)))
-		return -EFAULT;
-
-	error = __put_user(current->thread.irix_oldctx, &ctx->link);
-
-	error |= __copy_to_user(&ctx->sigmask, &current->blocked, sizeof(irix_sigset_t)) ? -EFAULT : 0;
-
-	/* XXX Do sigstack stuff someday... */
-	error |= __put_user(0, &ctx->stack.sp);
-	error |= __put_user(0, &ctx->stack.size);
-	error |= __put_user(0, &ctx->stack.flags);
-
-	error |= __put_user(0, &ctx->weird_graphics_thing);
-	error |= __put_user(0, &ctx->regs[0]);
-	for (i = 1; i < 32; i++)
-		error |= __put_user(regs->regs[i], &ctx->regs[i]);
-	error |= __put_user(regs->lo, &ctx->regs[32]);
-	error |= __put_user(regs->hi, &ctx->regs[33]);
-	error |= __put_user(regs->cp0_cause, &ctx->regs[34]);
-	error |= __put_user(regs->cp0_epc, &ctx->regs[35]);
-
-	flags = 0x0f;
-	if (!used_math()) {
-		flags &= ~(0x08);
-	} else {
-		/* XXX wheee... */
-		printk("Wheee, no code for saving IRIX FPU context yet.\n");
-	}
-	error |= __put_user(flags, &ctx->flags);
-
-	return error;
-}
-
-asmlinkage void irix_setcontext(struct pt_regs *regs)
-{
-	struct irix5_context __user *ctx;
-	int err, base = 0;
-	u32 flags;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-	ctx = (struct irix5_context __user *) regs->regs[base + 4];
-
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_setcontext(%p)\n",
-	       current->comm, current->pid, ctx);
-#endif
-
-	if (!access_ok(VERIFY_READ, ctx, sizeof(*ctx)))
-		goto segv_and_exit;
-
-	err = __get_user(flags, &ctx->flags);
-	if (flags & 0x02) {
-		/* XXX sigstack garbage, todo... */
-		printk("Wheee, cannot do sigstack stuff in setcontext\n");
-	}
-
-	if (flags & 0x04) {
-		int i;
-
-		/* XXX extra control block stuff... todo... */
-		for (i = 1; i < 32; i++)
-			err |= __get_user(regs->regs[i], &ctx->regs[i]);
-		err |= __get_user(regs->lo, &ctx->regs[32]);
-		err |= __get_user(regs->hi, &ctx->regs[33]);
-		err |= __get_user(regs->cp0_epc, &ctx->regs[35]);
-	}
-
-	if (flags & 0x08)
-		/* XXX fpu context, blah... */
-		printk(KERN_ERR "Wheee, cannot restore FPU context yet...\n");
-
-	err |= __get_user(current->thread.irix_oldctx, &ctx->link);
-	if (err)
-		goto segv_and_exit;
-
-	/*
-	 * Don't let your children do this ...
-	 */
-	__asm__ __volatile__(
-		"move\t$29,%0\n\t"
-		"j\tsyscall_exit"
-		:/* no outputs */
-		:"r" (&regs));
-		/* Unreached */
-
-segv_and_exit:
-	force_sigsegv(SIGSEGV, current);
-}
-
-struct irix_sigstack {
-	unsigned long sp;
-	int status;
-};
-
-asmlinkage int irix_sigstack(struct irix_sigstack __user *new,
-	struct irix_sigstack __user *old)
-{
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_sigstack(%p,%p)\n",
-	       current->comm, current->pid, new, old);
-#endif
-	if (new) {
-		if (!access_ok(VERIFY_READ, new, sizeof(*new)))
-			return -EFAULT;
-	}
-
-	if (old) {
-		if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-struct irix_sigaltstack { unsigned long sp; int size; int status; };
-
-asmlinkage int irix_sigaltstack(struct irix_sigaltstack __user *new,
-				struct irix_sigaltstack __user *old)
-{
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_sigaltstack(%p,%p)\n",
-	       current->comm, current->pid, new, old);
-#endif
-	if (new)
-		if (!access_ok(VERIFY_READ, new, sizeof(*new)))
-			return -EFAULT;
-
-	if (old) {
-		if (!access_ok(VERIFY_WRITE, old, sizeof(*old)))
-			return -EFAULT;
-	}
-
-	return 0;
-}
-
-struct irix_procset {
-	int cmd, ltype, lid, rtype, rid;
-};
-
-asmlinkage int irix_sigsendset(struct irix_procset __user *pset, int sig)
-{
-	if (!access_ok(VERIFY_READ, pset, sizeof(*pset)))
-		return -EFAULT;
-#ifdef DEBUG_SIG
-	printk("[%s:%d] irix_sigsendset([%d,%d,%d,%d,%d],%d)\n",
-	       current->comm, current->pid,
-	       pset->cmd, pset->ltype, pset->lid, pset->rtype, pset->rid,
-	       sig);
-#endif
-	return -EINVAL;
-}
diff --git a/arch/mips/kernel/irq-rm9000.c b/arch/mips/kernel/irq-rm9000.c
index ed9febe63d72..b47e4615ec12 100644
--- a/arch/mips/kernel/irq-rm9000.c
+++ b/arch/mips/kernel/irq-rm9000.c
@@ -49,7 +49,7 @@ static void local_rm9k_perfcounter_irq_startup(void *args)
 
 static unsigned int rm9k_perfcounter_irq_startup(unsigned int irq)
 {
-	on_each_cpu(local_rm9k_perfcounter_irq_startup, (void *) irq, 0, 1);
+	on_each_cpu(local_rm9k_perfcounter_irq_startup, (void *) irq, 1);
 
 	return 0;
 }
@@ -66,7 +66,7 @@ static void local_rm9k_perfcounter_irq_shutdown(void *args)
 
 static void rm9k_perfcounter_irq_shutdown(unsigned int irq)
 {
-	on_each_cpu(local_rm9k_perfcounter_irq_shutdown, (void *) irq, 0, 1);
+	on_each_cpu(local_rm9k_perfcounter_irq_shutdown, (void *) irq, 1);
 }
 
 static struct irq_chip rm9k_irq_controller = {
diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c
index e3309ff9ece4..4b4007b3083a 100644
--- a/arch/mips/kernel/irq.c
+++ b/arch/mips/kernel/irq.c
@@ -21,11 +21,16 @@
 #include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/kallsyms.h>
+#include <linux/kgdb.h>
 
 #include <asm/atomic.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
 
+#ifdef CONFIG_KGDB
+int kgdb_early_setup;
+#endif
+
 static unsigned long irq_map[NR_IRQS / BITS_PER_LONG];
 
 int allocate_irqno(void)
@@ -44,8 +49,6 @@ again:
 	return irq;
 }
 
-EXPORT_SYMBOL_GPL(allocate_irqno);
-
 /*
  * Allocate the 16 legacy interrupts for i8259 devices.  This happens early
  * in the kernel initialization so treating allocation failure as BUG() is
@@ -66,8 +69,6 @@ void free_irqno(unsigned int irq)
 	smp_mb__after_clear_bit();
 }
 
-EXPORT_SYMBOL_GPL(free_irqno);
-
 /*
  * 'what should we do if we get a hw irq event on an illegal vector'.
  * each architecture has to answer this themselves.
@@ -130,33 +131,22 @@ asmlinkage void spurious_interrupt(void)
 	atomic_inc(&irq_err_count);
 }
 
-#ifdef CONFIG_KGDB
-extern void breakpoint(void);
-extern void set_debug_traps(void);
-
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
-	kgdb_flag = 0;
-	return 1;
-}
-__setup("nokgdb", nokgdb);
-#endif
-
 void __init init_IRQ(void)
 {
 	int i;
 
+#ifdef CONFIG_KGDB
+	if (kgdb_early_setup)
+		return;
+#endif
+
 	for (i = 0; i < NR_IRQS; i++)
 		set_irq_noprobe(i);
 
 	arch_init_irq();
 
 #ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		printk("Wait for gdb client connection ...\n");
-		set_debug_traps();
-		breakpoint();
-	}
+	if (!kgdb_early_setup)
+		kgdb_early_setup = 1;
 #endif
 }
diff --git a/arch/mips/kernel/kgdb.c b/arch/mips/kernel/kgdb.c
new file mode 100644
index 000000000000..c5a8b2d21ca4
--- /dev/null
+++ b/arch/mips/kernel/kgdb.c
@@ -0,0 +1,281 @@
+/*
+ *  Originally written by Glenn Engel, Lake Stevens Instrument Division
+ *
+ *  Contributed by HP Systems
+ *
+ *  Modified for Linux/MIPS (and MIPS in general) by Andreas Busse
+ *  Send complaints, suggestions etc. to <andy@waldorf-gmbh.de>
+ *
+ *  Copyright (C) 1995 Andreas Busse
+ *
+ *  Copyright (C) 2003 MontaVista Software Inc.
+ *  Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ *  Copyright (C) 2004-2005 MontaVista Software Inc.
+ *  Author: Manish Lachwani, mlachwani@mvista.com or manish@koffee-break.com
+ *
+ *  Copyright (C) 2007-2008 Wind River Systems, Inc.
+ *  Author/Maintainer: Jason Wessel, jason.wessel@windriver.com
+ *
+ *  This file is licensed under the terms of the GNU General Public License
+ *  version 2. This program is licensed "as is" without any warranty of any
+ *  kind, whether express or implied.
+ */
+
+#include <linux/ptrace.h>		/* for linux pt_regs struct */
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
+#include <linux/sched.h>
+#include <asm/inst.h>
+#include <asm/fpu.h>
+#include <asm/cacheflush.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+
+static struct hard_trap_info {
+	unsigned char tt;	/* Trap type code for MIPS R3xxx and R4xxx */
+	unsigned char signo;	/* Signal that we map this trap into */
+} hard_trap_info[] = {
+	{ 6, SIGBUS },		/* instruction bus error */
+	{ 7, SIGBUS },		/* data bus error */
+	{ 9, SIGTRAP },		/* break */
+/*	{ 11, SIGILL },	*/	/* CPU unusable */
+	{ 12, SIGFPE },		/* overflow */
+	{ 13, SIGTRAP },	/* trap */
+	{ 14, SIGSEGV },	/* virtual instruction cache coherency */
+	{ 15, SIGFPE },		/* floating point exception */
+	{ 23, SIGSEGV },	/* watch */
+	{ 31, SIGSEGV },	/* virtual data cache coherency */
+	{ 0, 0}			/* Must be last */
+};
+
+void arch_kgdb_breakpoint(void)
+{
+	__asm__ __volatile__(
+		".globl breakinst\n\t"
+		".set\tnoreorder\n\t"
+		"nop\n"
+		"breakinst:\tbreak\n\t"
+		"nop\n\t"
+		".set\treorder");
+}
+
+static void kgdb_call_nmi_hook(void *ignored)
+{
+	kgdb_nmicallback(raw_smp_processor_id(), (void *)0);
+}
+
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	local_irq_enable();
+	smp_call_function(kgdb_call_nmi_hook, NULL, NULL);
+	local_irq_disable();
+}
+
+static int compute_signal(int tt)
+{
+	struct hard_trap_info *ht;
+
+	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+		if (ht->tt == tt)
+			return ht->signo;
+
+	return SIGHUP;		/* default for things we don't know about */
+}
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+	u32 *ptr = (u32 *)gdb_regs;
+#else
+	u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 32; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	*(ptr++) = regs->cp0_status;
+	*(ptr++) = regs->lo;
+	*(ptr++) = regs->hi;
+	*(ptr++) = regs->cp0_badvaddr;
+	*(ptr++) = regs->cp0_cause;
+	*(ptr++) = regs->cp0_epc;
+
+	/* FP REGS */
+	if (!(current && (regs->cp0_status & ST0_CU1)))
+		return;
+
+	save_fp(current);
+	for (reg = 0; reg < 32; reg++)
+		*(ptr++) = current->thread.fpu.fpr[reg];
+}
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	int reg;
+
+#if (KGDB_GDB_REG_SIZE == 32)
+	const u32 *ptr = (u32 *)gdb_regs;
+#else
+	const u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 32; reg++)
+		regs->regs[reg] = *(ptr++);
+
+	regs->cp0_status = *(ptr++);
+	regs->lo = *(ptr++);
+	regs->hi = *(ptr++);
+	regs->cp0_badvaddr = *(ptr++);
+	regs->cp0_cause = *(ptr++);
+	regs->cp0_epc = *(ptr++);
+
+	/* FP REGS from current */
+	if (!(current && (regs->cp0_status & ST0_CU1)))
+		return;
+
+	for (reg = 0; reg < 32; reg++)
+		current->thread.fpu.fpr[reg] = *(ptr++);
+	restore_fp(current);
+}
+
+/*
+ * Similar to regs_to_gdb_regs() except that process is sleeping and so
+ * we may not be able to get all the info.
+ */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	int reg;
+	struct thread_info *ti = task_thread_info(p);
+	unsigned long ksp = (unsigned long)ti + THREAD_SIZE - 32;
+	struct pt_regs *regs = (struct pt_regs *)ksp - 1;
+#if (KGDB_GDB_REG_SIZE == 32)
+	u32 *ptr = (u32 *)gdb_regs;
+#else
+	u64 *ptr = (u64 *)gdb_regs;
+#endif
+
+	for (reg = 0; reg < 16; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	/* S0 - S7 */
+	for (reg = 16; reg < 24; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	for (reg = 24; reg < 28; reg++)
+		*(ptr++) = 0;
+
+	/* GP, SP, FP, RA */
+	for (reg = 28; reg < 32; reg++)
+		*(ptr++) = regs->regs[reg];
+
+	*(ptr++) = regs->cp0_status;
+	*(ptr++) = regs->lo;
+	*(ptr++) = regs->hi;
+	*(ptr++) = regs->cp0_badvaddr;
+	*(ptr++) = regs->cp0_cause;
+	*(ptr++) = regs->cp0_epc;
+}
+
+/*
+ * Calls linux_debug_hook before the kernel dies. If KGDB is enabled,
+ * then try to fall into the debugger
+ */
+static int kgdb_mips_notify(struct notifier_block *self, unsigned long cmd,
+			    void *ptr)
+{
+	struct die_args *args = (struct die_args *)ptr;
+	struct pt_regs *regs = args->regs;
+	int trap = (regs->cp0_cause & 0x7c) >> 2;
+
+	if (fixup_exception(regs))
+		return NOTIFY_DONE;
+
+	/* Userpace events, ignore. */
+	if (user_mode(regs))
+		return NOTIFY_DONE;
+
+	if (atomic_read(&kgdb_active) != -1)
+		kgdb_nmicallback(smp_processor_id(), regs);
+
+	if (kgdb_handle_exception(trap, compute_signal(trap), 0, regs))
+		return NOTIFY_DONE;
+
+	if (atomic_read(&kgdb_setting_breakpoint))
+		if ((trap == 9) && (regs->cp0_epc == (unsigned long)breakinst))
+			regs->cp0_epc += 4;
+
+	/* In SMP mode, __flush_cache_all does IPI */
+	local_irq_enable();
+	__flush_cache_all();
+
+	return NOTIFY_STOP;
+}
+
+static struct notifier_block kgdb_notifier = {
+	.notifier_call = kgdb_mips_notify,
+};
+
+/*
+ * Handle the 's' and 'c' commands
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			       char *remcom_in_buffer, char *remcom_out_buffer,
+			       struct pt_regs *regs)
+{
+	char *ptr;
+	unsigned long address;
+	int cpu = smp_processor_id();
+
+	switch (remcom_in_buffer[0]) {
+	case 's':
+	case 'c':
+		/* handle the optional parameter */
+		ptr = &remcom_in_buffer[1];
+		if (kgdb_hex2long(&ptr, &address))
+			regs->cp0_epc = address;
+
+		atomic_set(&kgdb_cpu_doing_single_step, -1);
+		if (remcom_in_buffer[0] == 's')
+			if (kgdb_contthread)
+				atomic_set(&kgdb_cpu_doing_single_step, cpu);
+
+		return 0;
+	}
+
+	return -1;
+}
+
+struct kgdb_arch arch_kgdb_ops;
+
+/*
+ * We use kgdb_early_setup so that functions we need to call now don't
+ * cause trouble when called again later.
+ */
+int kgdb_arch_init(void)
+{
+	union mips_instruction insn = {
+		.r_format = {
+			.opcode = spec_op,
+			.func   = break_op,
+		}
+	};
+	memcpy(arch_kgdb_ops.gdb_bpt_instr, insn.byte, BREAK_INSTR_SIZE);
+
+	register_die_notifier(&kgdb_notifier);
+
+	return 0;
+}
+
+/*
+ *	kgdb_arch_exit - Perform any architecture specific uninitalization.
+ *
+ *	This function will handle the uninitalization of any architecture
+ *	specific callbacks, for dynamic registration and unregistration.
+ */
+void kgdb_arch_exit(void)
+{
+	unregister_die_notifier(&kgdb_notifier);
+}
diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c
index 65af3cc90abb..2fefb14414b7 100644
--- a/arch/mips/kernel/linux32.c
+++ b/arch/mips/kernel/linux32.c
@@ -11,7 +11,6 @@
 #include <linux/file.h>
 #include <linux/smp_lock.h>
 #include <linux/highuid.h>
-#include <linux/dirent.h>
 #include <linux/resource.h>
 #include <linux/highmem.h>
 #include <linux/time.h>
@@ -129,23 +128,6 @@ out:
 	return error;
 }
 
-
-asmlinkage int sys_truncate64(const char __user *path, unsigned int high,
-			      unsigned int low)
-{
-	if ((int)high < 0)
-		return -EINVAL;
-	return sys_truncate(path, ((long) high << 32) | low);
-}
-
-asmlinkage int sys_ftruncate64(unsigned int fd, unsigned int high,
-			       unsigned int low)
-{
-	if ((int)high < 0)
-		return -EINVAL;
-	return sys_ftruncate(fd, ((long) high << 32) | low);
-}
-
 /*
  * sys_execve() executes a new program.
  */
diff --git a/arch/mips/kernel/mips-mt.c b/arch/mips/kernel/mips-mt.c
index 640fb0cc6e39..d01665a453f5 100644
--- a/arch/mips/kernel/mips-mt.c
+++ b/arch/mips/kernel/mips-mt.c
@@ -4,7 +4,6 @@
  */
 
 #include <linux/device.h>
-#include <linux/kallsyms.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/module.h>
@@ -84,9 +83,9 @@ void mips_mt_regdump(unsigned long mvpctl)
 				       read_vpe_c0_vpeconf0());
 				printk("   VPE%d.Status : %08lx\n",
 				       i, read_vpe_c0_status());
-				printk("   VPE%d.EPC : %08lx ",
-				       i, read_vpe_c0_epc());
-				print_symbol("%s\n", read_vpe_c0_epc());
+				printk("   VPE%d.EPC : %08lx %pS\n",
+				       i, read_vpe_c0_epc(),
+				       (void *) read_vpe_c0_epc());
 				printk("   VPE%d.Cause : %08lx\n",
 				       i, read_vpe_c0_cause());
 				printk("   VPE%d.Config7 : %08lx\n",
@@ -111,8 +110,8 @@ void mips_mt_regdump(unsigned long mvpctl)
 		}
 		printk("   TCStatus : %08lx\n", tcstatval);
 		printk("   TCBind : %08lx\n", read_tc_c0_tcbind());
-		printk("   TCRestart : %08lx ", read_tc_c0_tcrestart());
-		print_symbol("%s\n", read_tc_c0_tcrestart());
+		printk("   TCRestart : %08lx %pS\n",
+		       read_tc_c0_tcrestart(), (void *) read_tc_c0_tcrestart());
 		printk("   TCHalt : %08lx\n", haltval);
 		printk("   TCContext : %08lx\n", read_tc_c0_tccontext());
 		if (!haltval)
diff --git a/arch/mips/kernel/module.c b/arch/mips/kernel/module.c
index e7ed0ac48537..1f60e27523d9 100644
--- a/arch/mips/kernel/module.c
+++ b/arch/mips/kernel/module.c
@@ -22,6 +22,7 @@
 
 #include <linux/moduleloader.h>
 #include <linux/elf.h>
+#include <linux/mm.h>
 #include <linux/vmalloc.h>
 #include <linux/slab.h>
 #include <linux/fs.h>
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 2c09a442e5e5..b16facd9ea8e 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -53,7 +53,7 @@ void __noreturn cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched()) {
 #ifdef CONFIG_SMTC_IDLE_HOOK_DEBUG
 			extern void smtc_idle_loop_hook(void);
@@ -125,13 +125,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	*childregs = *regs;
 	childregs->regs[7] = 0;	/* Clear error flag */
 
-#if defined(CONFIG_BINFMT_IRIX)
-	if (current->personality != PER_LINUX) {
-		/* Under IRIX things are a little different. */
-		childregs->regs[3] = 1;
-		regs->regs[3] = 0;
-	}
-#endif
 	childregs->regs[2] = 0;	/* Child gets zero as return value */
 	regs->regs[2] = p->pid;
 
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index b55641961232..dfd868b68364 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -522,8 +522,8 @@ static int __init rtlx_module_init(void)
 		atomic_set(&channel_wqs[i].in_open, 0);
 		mutex_init(&channel_wqs[i].mutex);
 
-		dev = device_create(mt_class, NULL, MKDEV(major, i),
-		                    "%s%d", module_name, i);
+		dev = device_create_drvdata(mt_class, NULL, MKDEV(major, i),
+					    NULL, "%s%d", module_name, i);
 		if (IS_ERR(dev)) {
 			err = PTR_ERR(dev);
 			goto out_chrdev;
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 08a9c5070ea8..fc4fd4d705e2 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -34,12 +34,8 @@ NESTED(handle_sys, PT_SIZE, sp)
 
 	lw	t1, PT_EPC(sp)		# skip syscall on return
 
-#if defined(CONFIG_BINFMT_IRIX)
-	sltiu	t0, v0, MAX_SYSCALL_NO + 1 # check syscall number
-#else
 	subu	v0, v0, __NR_O32_Linux	# check syscall number
 	sltiu	t0, v0, __NR_O32_Linux_syscalls + 1
-#endif
 	addiu	t1, 4			# skip to next instruction
 	sw	t1, PT_EPC(sp)
 	beqz	t0, illegal_syscall
@@ -264,22 +260,14 @@ bad_alignment:
 	END(sys_sysmips)
 
 	LEAF(sys_syscall)
-#if defined(CONFIG_BINFMT_IRIX)
-	sltiu	v0, a0, MAX_SYSCALL_NO + 1 # check syscall number
-#else
 	subu	t0, a0, __NR_O32_Linux	# check syscall number
 	sltiu	v0, t0, __NR_O32_Linux_syscalls + 1
-#endif
 	sll	t1, t0, 3
 	beqz	v0, einval
 
 	lw	t2, sys_call_table(t1)		# syscall routine
 
-#if defined(CONFIG_BINFMT_IRIX)
-	li	v1, 4000			# nr of sys_syscall
-#else
 	li	v1, 4000 - __NR_O32_Linux	# index of sys_syscall
-#endif
 	beq	t0, v1, einval			# do not recurse
 
 	/* Some syscalls like execve get their arguments from struct pt_regs
@@ -324,13 +312,6 @@ einval:	li	v0, -EINVAL
 	.endm
 
 	.macro	syscalltable
-#if defined(CONFIG_BINFMT_IRIX)
-	mille	sys_ni_syscall		0	/*    0 -  999 SVR4 flavour */
-	mille	sys_ni_syscall		0	/* 1000 - 1999 32-bit IRIX */
-	mille	sys_ni_syscall		0	/* 2000 - 2999 BSD43 flavour */
-	mille	sys_ni_syscall		0	/* 3000 - 3999 POSIX flavour */
-#endif
-
 	sys	sys_syscall		8	/* 4000 */
 	sys	sys_exit		1
 	sys	sys_fork		0
@@ -373,7 +354,7 @@ einval:	li	v0, -EINVAL
 	sys	sys_mkdir		2
 	sys	sys_rmdir		1	/* 4040 */
 	sys	sys_dup			1
-	sys	sys_pipe		0
+	sys	sysm_pipe		0
 	sys	sys_times		1
 	sys	sys_ni_syscall		0
 	sys	sys_brk			1	/* 4045 */
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index dc597b600c68..2b73fd1e4528 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -219,7 +219,7 @@ sys_call_table:
 	PTR	sys_readv
 	PTR	sys_writev
 	PTR	sys_access			/* 5020 */
-	PTR	sys_pipe
+	PTR	sysm_pipe
 	PTR	sys_select
 	PTR	sys_sched_yield
 	PTR	sys_mremap
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 12940eca7893..2654e75d2fef 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -141,7 +141,7 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_readv
 	PTR	compat_sys_writev
 	PTR	sys_access			/* 6020 */
-	PTR	sys_pipe
+	PTR	sysm_pipe
 	PTR	compat_sys_select
 	PTR	sys_sched_yield
 	PTR	sys_mremap
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 9a275efb4f04..76167bea5a70 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -247,7 +247,7 @@ sys_call_table:
 	PTR	sys_mkdir
 	PTR	sys_rmdir			/* 4040 */
 	PTR	sys_dup
-	PTR	sys_pipe
+	PTR	sysm_pipe
 	PTR	compat_sys_times
 	PTR	sys_ni_syscall
 	PTR	sys_brk				/* 4045 */
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index c6a063b2a0d9..8af84867e74d 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -68,13 +68,6 @@ static char command_line[CL_SIZE];
 const unsigned long mips_io_port_base __read_mostly = -1;
 EXPORT_SYMBOL(mips_io_port_base);
 
-/*
- * isa_slot_offset is the address where E(ISA) busaddress 0 is mapped
- * for the processor.
- */
-unsigned long isa_slot_offset;
-EXPORT_SYMBOL(isa_slot_offset);
-
 static struct resource code_resource = { .name = "Kernel code", };
 static struct resource data_resource = { .name = "Kernel data", };
 
@@ -557,11 +550,7 @@ void __init setup_arch(char **cmdline_p)
 	prom_init();
 
 #ifdef CONFIG_EARLY_PRINTK
-	{
-		extern void setup_early_printk(void);
-
-		setup_early_printk();
-	}
+	setup_early_printk();
 #endif
 	cpu_report();
 	check_bugs_early();
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index cdf87a9dd4ba..4410f172b8ab 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -131,148 +131,29 @@ asmlinkage __cpuinit void start_secondary(void)
 	cpu_idle();
 }
 
-DEFINE_SPINLOCK(smp_call_lock);
-
-struct call_data_struct *call_data;
-
-/*
- * Run a function on all other CPUs.
- *
- *  <mask>	cpuset_t of all processors to run the function on.
- *  <func>      The function to run. This must be fast and non-blocking.
- *  <info>      An arbitrary pointer to pass to the function.
- *  <retry>     If true, keep retrying until ready.
- *  <wait>      If true, wait until function has completed on other CPUs.
- *  [RETURNS]   0 on success, else a negative status code.
- *
- * Does not return until remote CPUs are nearly ready to execute <func>
- * or are or have executed.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler:
- *
- * CPU A                               CPU B
- * Disable interrupts
- *                                     smp_call_function()
- *                                     Take call_lock
- *                                     Send IPIs
- *                                     Wait for all cpus to acknowledge IPI
- *                                     CPU A has not responded, spin waiting
- *                                     for cpu A to respond, holding call_lock
- * smp_call_function()
- * Spin waiting for call_lock
- * Deadlock                            Deadlock
- */
-int smp_call_function_mask(cpumask_t mask, void (*func) (void *info),
-	void *info, int retry, int wait)
+void arch_send_call_function_ipi(cpumask_t mask)
 {
-	struct call_data_struct data;
-	int cpu = smp_processor_id();
-	int cpus;
-
-	/*
-	 * Can die spectacularly if this CPU isn't yet marked online
-	 */
-	BUG_ON(!cpu_online(cpu));
-
-	cpu_clear(cpu, mask);
-	cpus = cpus_weight(mask);
-	if (!cpus)
-		return 0;
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	spin_lock(&smp_call_lock);
-	call_data = &data;
-	smp_mb();
-
-	/* Send a message to all other CPUs and wait for them to respond */
 	mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
-
-	/* Wait for response */
-	/* FIXME: lock-up detection, backtrace on lock-up */
-	while (atomic_read(&data.started) != cpus)
-		barrier();
-
-	if (wait)
-		while (atomic_read(&data.finished) != cpus)
-			barrier();
-	call_data = NULL;
-	spin_unlock(&smp_call_lock);
-
-	return 0;
 }
 
-int smp_call_function(void (*func) (void *info), void *info, int retry,
-	int wait)
+/*
+ * We reuse the same vector for the single IPI
+ */
+void arch_send_call_function_single_ipi(int cpu)
 {
-	return smp_call_function_mask(cpu_online_map, func, info, retry, wait);
+	mp_ops->send_ipi_mask(cpumask_of_cpu(cpu), SMP_CALL_FUNCTION);
 }
-EXPORT_SYMBOL(smp_call_function);
 
+/*
+ * Call into both interrupt handlers, as we share the IPI for them
+ */
 void smp_call_function_interrupt(void)
 {
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
-	int wait = call_data->wait;
-
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function.
-	 */
-	smp_mb();
-	atomic_inc(&call_data->started);
-
-	/*
-	 * At this point the info structure may be out of scope unless wait==1.
-	 */
 	irq_enter();
-	(*func)(info);
+	generic_smp_call_function_single_interrupt();
+	generic_smp_call_function_interrupt();
 	irq_exit();
-
-	if (wait) {
-		smp_mb();
-		atomic_inc(&call_data->finished);
-	}
-}
-
-int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
-			     int retry, int wait)
-{
-	int ret, me;
-
-	/*
-	 * Can die spectacularly if this CPU isn't yet marked online
-	 */
-	if (!cpu_online(cpu))
-		return 0;
-
-	me = get_cpu();
-	BUG_ON(!cpu_online(me));
-
-	if (cpu == me) {
-		local_irq_disable();
-		func(info);
-		local_irq_enable();
-		put_cpu();
-		return 0;
-	}
-
-	ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, retry,
-				     wait);
-
-	put_cpu();
-	return 0;
 }
-EXPORT_SYMBOL(smp_call_function_single);
 
 static void stop_this_cpu(void *dummy)
 {
@@ -286,7 +167,7 @@ static void stop_this_cpu(void *dummy)
 
 void smp_send_stop(void)
 {
-	smp_call_function(stop_this_cpu, NULL, 1, 0);
+	smp_call_function(stop_this_cpu, NULL, 0);
 }
 
 void __init smp_cpus_done(unsigned int max_cpus)
@@ -365,7 +246,7 @@ static void flush_tlb_all_ipi(void *info)
 
 void flush_tlb_all(void)
 {
-	on_each_cpu(flush_tlb_all_ipi, NULL, 1, 1);
+	on_each_cpu(flush_tlb_all_ipi, NULL, 1);
 }
 
 static void flush_tlb_mm_ipi(void *mm)
@@ -385,7 +266,7 @@ static void flush_tlb_mm_ipi(void *mm)
 static inline void smp_on_other_tlbs(void (*func) (void *info), void *info)
 {
 #ifndef CONFIG_MIPS_MT_SMTC
-	smp_call_function(func, info, 1, 1);
+	smp_call_function(func, info, 1);
 #endif
 }
 
@@ -485,7 +366,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 		.addr2 = end,
 	};
 
-	on_each_cpu(flush_tlb_kernel_range_ipi, &fd, 1, 1);
+	on_each_cpu(flush_tlb_kernel_range_ipi, &fd, 1);
 }
 
 static void flush_tlb_page_ipi(void *info)
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 3e863186cd22..a516286532ab 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -877,7 +877,6 @@ static void ipi_resched_interrupt(void)
 	/* Return from interrupt should be enough to cause scheduler check */
 }
 
-
 static void ipi_call_interrupt(void)
 {
 	/* Invoke generic function invocation code in smp.c */
diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c
index 5eb4681a73d2..0632e2a849c0 100644
--- a/arch/mips/kernel/stacktrace.c
+++ b/arch/mips/kernel/stacktrace.c
@@ -7,6 +7,7 @@
  */
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
+#include <linux/module.h>
 #include <asm/stacktrace.h>
 
 /*
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index af1bdc897488..343015a2f418 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -40,12 +40,19 @@
 #include <asm/sysmips.h>
 #include <asm/uaccess.h>
 
-asmlinkage int sys_pipe(nabi_no_regargs volatile struct pt_regs regs)
+/*
+ * For historic reasons the pipe(2) syscall on MIPS has an unusual calling
+ * convention.  It returns results in registers $v0 / $v1 which means there
+ * is no need for it to do verify the validity of a userspace pointer
+ * argument.  Historically that used to be expensive in Linux.  These days
+ * the performance advantage is negligible.
+ */
+asmlinkage int sysm_pipe(nabi_no_regargs volatile struct pt_regs regs)
 {
 	int fd[2];
 	int error, res;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (error) {
 		res = error;
 		goto out;
diff --git a/arch/mips/kernel/sysirix.c b/arch/mips/kernel/sysirix.c
deleted file mode 100644
index c357762b8012..000000000000
--- a/arch/mips/kernel/sysirix.c
+++ /dev/null
@@ -1,2140 +0,0 @@
-/*
- * sysirix.c: IRIX system call emulation.
- *
- * Copyright (C) 1996 David S. Miller
- * Copyright (C) 1997 Miguel de Icaza
- * Copyright (C) 1997, 1998, 1999, 2000 Ralf Baechle
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/binfmts.h>
-#include <linux/capability.h>
-#include <linux/highuid.h>
-#include <linux/pagemap.h>
-#include <linux/mm.h>
-#include <linux/mman.h>
-#include <linux/slab.h>
-#include <linux/swap.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/times.h>
-#include <linux/elf.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/utsname.h>
-#include <linux/file.h>
-#include <linux/vfs.h>
-#include <linux/namei.h>
-#include <linux/socket.h>
-#include <linux/security.h>
-#include <linux/syscalls.h>
-#include <linux/resource.h>
-
-#include <asm/ptrace.h>
-#include <asm/page.h>
-#include <asm/uaccess.h>
-#include <asm/inventory.h>
-
-/* 2,191 lines of complete and utter shit coming up... */
-
-extern int max_threads;
-
-/* The sysmp commands supported thus far. */
-#define MP_NPROCS       	1 /* # processor in complex */
-#define MP_NAPROCS      	2 /* # active processors in complex */
-#define MP_PGSIZE           	14 /* Return system page size in v1. */
-
-asmlinkage int irix_sysmp(struct pt_regs *regs)
-{
-	unsigned long cmd;
-	int base = 0;
-	int error = 0;
-
-	if(regs->regs[2] == 1000)
-		base = 1;
-	cmd = regs->regs[base + 4];
-	switch(cmd) {
-	case MP_PGSIZE:
-		error = PAGE_SIZE;
-		break;
-	case MP_NPROCS:
-	case MP_NAPROCS:
-		error = num_online_cpus();
-		break;
-	default:
-		printk("SYSMP[%s:%d]: Unsupported opcode %d\n",
-		       current->comm, current->pid, (int)cmd);
-		error = -EINVAL;
-		break;
-	}
-
-	return error;
-}
-
-/* The prctl commands. */
-#define PR_MAXPROCS		 1 /* Tasks/user. */
-#define PR_ISBLOCKED		 2 /* If blocked, return 1. */
-#define PR_SETSTACKSIZE		 3 /* Set largest task stack size. */
-#define PR_GETSTACKSIZE		 4 /* Get largest task stack size. */
-#define PR_MAXPPROCS		 5 /* Num parallel tasks. */
-#define PR_UNBLKONEXEC		 6 /* When task exec/exit's, unblock. */
-#define PR_SETEXITSIG		 8 /* When task exit's, set signal. */
-#define PR_RESIDENT		 9 /* Make task unswappable. */
-#define PR_ATTACHADDR		10 /* (Re-)Connect a vma to a task. */
-#define PR_DETACHADDR		11 /* Disconnect a vma from a task. */
-#define PR_TERMCHILD		12 /* Kill child if the parent dies. */
-#define PR_GETSHMASK		13 /* Get the sproc() share mask. */
-#define PR_GETNSHARE		14 /* Number of share group members. */
-#define PR_COREPID		15 /* Add task pid to name when it core. */
-#define PR_ATTACHADDRPERM	16 /* (Re-)Connect vma, with specified prot. */
-#define PR_PTHREADEXIT		17 /* Kill a pthread, only for IRIX 6.[234] */
-
-asmlinkage int irix_prctl(unsigned option, ...)
-{
-	va_list args;
-	int error = 0;
-
-	va_start(args, option);
-	switch (option) {
-	case PR_MAXPROCS:
-		printk("irix_prctl[%s:%d]: Wants PR_MAXPROCS\n",
-		       current->comm, current->pid);
-		error = max_threads;
-		break;
-
-	case PR_ISBLOCKED: {
-		struct task_struct *task;
-
-		printk("irix_prctl[%s:%d]: Wants PR_ISBLOCKED\n",
-		       current->comm, current->pid);
-		read_lock(&tasklist_lock);
-		task = find_task_by_vpid(va_arg(args, pid_t));
-		error = -ESRCH;
-		if (error)
-			error = (task->run_list.next != NULL);
-		read_unlock(&tasklist_lock);
-		/* Can _your_ OS find this out that fast? */
-		break;
-	}
-
-	case PR_SETSTACKSIZE: {
-		long value = va_arg(args, long);
-
-		printk("irix_prctl[%s:%d]: Wants PR_SETSTACKSIZE<%08lx>\n",
-		       current->comm, current->pid, (unsigned long) value);
-		if (value > RLIM_INFINITY)
-			value = RLIM_INFINITY;
-		if (capable(CAP_SYS_ADMIN)) {
-			task_lock(current->group_leader);
-			current->signal->rlim[RLIMIT_STACK].rlim_max =
-				current->signal->rlim[RLIMIT_STACK].rlim_cur = value;
-			task_unlock(current->group_leader);
-			error = value;
-			break;
-		}
-		task_lock(current->group_leader);
-		if (value > current->signal->rlim[RLIMIT_STACK].rlim_max) {
-			error = -EINVAL;
-			task_unlock(current->group_leader);
-			break;
-		}
-		current->signal->rlim[RLIMIT_STACK].rlim_cur = value;
-		task_unlock(current->group_leader);
-		error = value;
-		break;
-	}
-
-	case PR_GETSTACKSIZE:
-		printk("irix_prctl[%s:%d]: Wants PR_GETSTACKSIZE\n",
-		       current->comm, current->pid);
-		error = current->signal->rlim[RLIMIT_STACK].rlim_cur;
-		break;
-
-	case PR_MAXPPROCS:
-		printk("irix_prctl[%s:%d]: Wants PR_MAXPROCS\n",
-		       current->comm, current->pid);
-		error = 1;
-		break;
-
-	case PR_UNBLKONEXEC:
-		printk("irix_prctl[%s:%d]: Wants PR_UNBLKONEXEC\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	case PR_SETEXITSIG:
-		printk("irix_prctl[%s:%d]: Wants PR_SETEXITSIG\n",
-		       current->comm, current->pid);
-
-		/* We can probably play some game where we set the task
-		 * exit_code to some non-zero value when this is requested,
-		 * and check whether exit_code is already set in do_exit().
-		 */
-		error = -EINVAL;
-		break;
-
-	case PR_RESIDENT:
-		printk("irix_prctl[%s:%d]: Wants PR_RESIDENT\n",
-		       current->comm, current->pid);
-		error = 0; /* Compatibility indeed. */
-		break;
-
-	case PR_ATTACHADDR:
-		printk("irix_prctl[%s:%d]: Wants PR_ATTACHADDR\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	case PR_DETACHADDR:
-		printk("irix_prctl[%s:%d]: Wants PR_DETACHADDR\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	case PR_TERMCHILD:
-		printk("irix_prctl[%s:%d]: Wants PR_TERMCHILD\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	case PR_GETSHMASK:
-		printk("irix_prctl[%s:%d]: Wants PR_GETSHMASK\n",
-		       current->comm, current->pid);
-		error = -EINVAL; /* Until I have the sproc() stuff in. */
-		break;
-
-	case PR_GETNSHARE:
-		error = 0;       /* Until I have the sproc() stuff in. */
-		break;
-
-	case PR_COREPID:
-		printk("irix_prctl[%s:%d]: Wants PR_COREPID\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	case PR_ATTACHADDRPERM:
-		printk("irix_prctl[%s:%d]: Wants PR_ATTACHADDRPERM\n",
-		       current->comm, current->pid);
-		error = -EINVAL;
-		break;
-
-	default:
-		printk("irix_prctl[%s:%d]: Non-existant opcode %d\n",
-		       current->comm, current->pid, option);
-		error = -EINVAL;
-		break;
-	}
-	va_end(args);
-
-	return error;
-}
-
-#undef DEBUG_PROCGRPS
-
-extern unsigned long irix_mapelf(int fd, struct elf_phdr __user *user_phdrp, int cnt);
-extern char *prom_getenv(char *name);
-extern long prom_setenv(char *name, char *value);
-
-/* The syssgi commands supported thus far. */
-#define SGI_SYSID         1       /* Return unique per-machine identifier. */
-#define SGI_INVENT        5       /* Fetch inventory  */
-#   define SGI_INV_SIZEOF 1
-#   define SGI_INV_READ   2
-#define SGI_RDNAME        6       /* Return string name of a process. */
-#define SGI_SETNVRAM	  8	  /* Set PROM variable. */
-#define SGI_GETNVRAM	  9	  /* Get PROM variable. */
-#define SGI_SETPGID      21       /* Set process group id. */
-#define SGI_SYSCONF      22       /* POSIX sysconf garbage. */
-#define SGI_PATHCONF     24       /* POSIX sysconf garbage. */
-#define SGI_SETGROUPS    40       /* POSIX sysconf garbage. */
-#define SGI_GETGROUPS    41       /* POSIX sysconf garbage. */
-#define SGI_RUSAGE       56       /* BSD style rusage(). */
-#define SGI_SSYNC        62       /* Synchronous fs sync. */
-#define SGI_GETSID       65       /* SysVr4 get session id. */
-#define SGI_ELFMAP       68       /* Map an elf image. */
-#define SGI_TOSSTSAVE   108       /* Toss saved vma's. */
-#define SGI_FP_BCOPY    129       /* Should FPU bcopy be used on this machine? */
-#define SGI_PHYSP      1011       /* Translate virtual into physical page. */
-
-asmlinkage int irix_syssgi(struct pt_regs *regs)
-{
-	unsigned long cmd;
-	int retval, base = 0;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-
-	cmd = regs->regs[base + 4];
-	switch(cmd) {
-	case SGI_SYSID: {
-		char __user *buf = (char __user *) regs->regs[base + 5];
-
-		/* XXX Use ethernet addr.... */
-		retval = clear_user(buf, 64) ? -EFAULT : 0;
-		break;
-	}
-#if 0
-	case SGI_RDNAME: {
-		int pid = (int) regs->regs[base + 5];
-		char __user *buf = (char __user *) regs->regs[base + 6];
-		struct task_struct *p;
-		char tcomm[sizeof(current->comm)];
-
-		read_lock(&tasklist_lock);
-		p = find_task_by_pid(pid);
-		if (!p) {
-			read_unlock(&tasklist_lock);
-			retval = -ESRCH;
-			break;
-		}
-		get_task_comm(tcomm, p);
-		read_unlock(&tasklist_lock);
-
-		/* XXX Need to check sizes. */
-		retval = copy_to_user(buf, tcomm, sizeof(tcomm)) ? -EFAULT : 0;
-		break;
-	}
-
-	case SGI_GETNVRAM: {
-		char __user *name = (char __user *) regs->regs[base+5];
-		char __user *buf = (char __user *) regs->regs[base+6];
-		char *value;
-		return -EINVAL;	/* til I fix it */
-		value = prom_getenv(name);	/* PROM lock?  */
-		if (!value) {
-			retval = -EINVAL;
-			break;
-		}
-		/* Do I strlen() for the length? */
-		retval = copy_to_user(buf, value, 128) ? -EFAULT : 0;
-		break;
-	}
-
-	case SGI_SETNVRAM: {
-		char __user *name = (char __user *) regs->regs[base+5];
-		char __user *value = (char __user *) regs->regs[base+6];
-		return -EINVAL;	/* til I fix it */
-		retval = prom_setenv(name, value);
-		/* XXX make sure retval conforms to syssgi(2) */
-		printk("[%s:%d] setnvram(\"%s\", \"%s\"): retval %d",
-		       current->comm, current->pid, name, value, retval);
-/*		if (retval == PROM_ENOENT)
-		  	retval = -ENOENT; */
-		break;
-	}
-#endif
-
-	case SGI_SETPGID: {
-#ifdef DEBUG_PROCGRPS
-		printk("[%s:%d] setpgid(%d, %d) ",
-		       current->comm, current->pid,
-		       (int) regs->regs[base + 5], (int)regs->regs[base + 6]);
-#endif
-		retval = sys_setpgid(regs->regs[base + 5], regs->regs[base + 6]);
-
-#ifdef DEBUG_PROCGRPS
-		printk("retval=%d\n", retval);
-#endif
-	}
-
-	case SGI_SYSCONF: {
-		switch(regs->regs[base + 5]) {
-		case 1:
-			retval = (MAX_ARG_PAGES >> 4); /* XXX estimate... */
-			goto out;
-		case 2:
-			retval = max_threads;
-			goto out;
-		case 3:
-			retval = HZ;
-			goto out;
-		case 4:
-			retval = NGROUPS_MAX;
-			goto out;
-		case 5:
-			retval = sysctl_nr_open;
-			goto out;
-		case 6:
-			retval = 1;
-			goto out;
-		case 7:
-			retval = 1;
-			goto out;
-		case 8:
-			retval = 199009;
-			goto out;
-		case 11:
-			retval = PAGE_SIZE;
-			goto out;
-		case 12:
-			retval = 4;
-			goto out;
-		case 25:
-		case 26:
-		case 27:
-		case 28:
-		case 29:
-		case 30:
-			retval = 0;
-			goto out;
-		case 31:
-			retval = 32;
-			goto out;
-		default:
-			retval = -EINVAL;
-			goto out;
-		};
-	}
-
-	case SGI_SETGROUPS:
-		retval = sys_setgroups((int) regs->regs[base + 5],
-		                       (gid_t __user *) regs->regs[base + 6]);
-		break;
-
-	case SGI_GETGROUPS:
-		retval = sys_getgroups((int) regs->regs[base + 5],
-		                       (gid_t __user *) regs->regs[base + 6]);
-		break;
-
-	case SGI_RUSAGE: {
-		struct rusage __user *ru = (struct rusage __user *) regs->regs[base + 6];
-
-		switch((int) regs->regs[base + 5]) {
-		case 0:
-			/* rusage self */
-			retval = getrusage(current, RUSAGE_SELF, ru);
-			goto out;
-
-		case -1:
-			/* rusage children */
-			retval = getrusage(current, RUSAGE_CHILDREN, ru);
-			goto out;
-
-		default:
-			retval = -EINVAL;
-			goto out;
-		};
-	}
-
-	case SGI_SSYNC:
-		sys_sync();
-		retval = 0;
-		break;
-
-	case SGI_GETSID:
-#ifdef DEBUG_PROCGRPS
-		printk("[%s:%d] getsid(%d) ", current->comm, current->pid,
-		       (int) regs->regs[base + 5]);
-#endif
-		retval = sys_getsid(regs->regs[base + 5]);
-#ifdef DEBUG_PROCGRPS
-		printk("retval=%d\n", retval);
-#endif
-		break;
-
-	case SGI_ELFMAP:
-		retval = irix_mapelf((int) regs->regs[base + 5],
-				     (struct elf_phdr __user *) regs->regs[base + 6],
-				     (int) regs->regs[base + 7]);
-		break;
-
-	case SGI_TOSSTSAVE:
-		/* XXX We don't need to do anything? */
-		retval = 0;
-		break;
-
-	case SGI_FP_BCOPY:
-		retval = 0;
-		break;
-
-	case SGI_PHYSP: {
-		unsigned long addr = regs->regs[base + 5];
-		int __user *pageno = (int __user *) (regs->regs[base + 6]);
-		struct mm_struct *mm = current->mm;
-		pgd_t *pgdp;
-		pud_t *pudp;
-		pmd_t *pmdp;
-		pte_t *ptep;
-
-		down_read(&mm->mmap_sem);
-		pgdp = pgd_offset(mm, addr);
-		pudp = pud_offset(pgdp, addr);
-		pmdp = pmd_offset(pudp, addr);
-		ptep = pte_offset(pmdp, addr);
-		retval = -EINVAL;
-		if (ptep) {
-			pte_t pte = *ptep;
-
-			if (pte_val(pte) & (_PAGE_VALID | _PAGE_PRESENT)) {
-				/* b0rked on 64-bit */
-				retval =  put_user((pte_val(pte) & PAGE_MASK) >>
-				                   PAGE_SHIFT, pageno);
-			}
-		}
-		up_read(&mm->mmap_sem);
-		break;
-	}
-
-	case SGI_INVENT: {
-		int  arg1    = (int)    regs->regs [base + 5];
-		void __user *buffer = (void __user *) regs->regs [base + 6];
-		int  count   = (int)    regs->regs [base + 7];
-
-		switch (arg1) {
-		case SGI_INV_SIZEOF:
-			retval = sizeof(inventory_t);
-			break;
-		case SGI_INV_READ:
-			retval = dump_inventory_to_user(buffer, count);
-			break;
-		default:
-			retval = -EINVAL;
-		}
-		break;
-	}
-
-	default:
-		printk("irix_syssgi: Unsupported command %d\n", (int)cmd);
-		retval = -EINVAL;
-		break;
-	};
-
-out:
-	return retval;
-}
-
-asmlinkage int irix_gtime(struct pt_regs *regs)
-{
-	return get_seconds();
-}
-
-/*
- * IRIX is completely broken... it returns 0 on success, otherwise
- * ENOMEM.
- */
-asmlinkage int irix_brk(unsigned long brk)
-{
-	unsigned long rlim;
-	unsigned long newbrk, oldbrk;
-	struct mm_struct *mm = current->mm;
-	int ret;
-
-	down_write(&mm->mmap_sem);
-	if (brk < mm->end_code) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	newbrk = PAGE_ALIGN(brk);
-	oldbrk = PAGE_ALIGN(mm->brk);
-	if (oldbrk == newbrk) {
-		mm->brk = brk;
-		ret = 0;
-		goto out;
-	}
-
-	/*
-	 * Always allow shrinking brk
-	 */
-	if (brk <= mm->brk) {
-		mm->brk = brk;
-		do_munmap(mm, newbrk, oldbrk-newbrk);
-		ret = 0;
-		goto out;
-	}
-	/*
-	 * Check against rlimit and stack..
-	 */
-	rlim = current->signal->rlim[RLIMIT_DATA].rlim_cur;
-	if (rlim >= RLIM_INFINITY)
-		rlim = ~0;
-	if (brk - mm->end_code > rlim) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	/*
-	 * Check against existing mmap mappings.
-	 */
-	if (find_vma_intersection(mm, oldbrk, newbrk+PAGE_SIZE)) {
-		ret = -ENOMEM;
-		goto out;
-	}
-
-	/*
-	 * Ok, looks good - let it rip.
-	 */
-	if (do_brk(oldbrk, newbrk-oldbrk) != oldbrk) {
-		ret = -ENOMEM;
-		goto out;
-	}
-	mm->brk = brk;
-	ret = 0;
-
-out:
-	up_write(&mm->mmap_sem);
-	return ret;
-}
-
-asmlinkage int irix_getpid(struct pt_regs *regs)
-{
-	regs->regs[3] = task_pid_vnr(current->real_parent);
-	return task_pid_vnr(current);
-}
-
-asmlinkage int irix_getuid(struct pt_regs *regs)
-{
-	regs->regs[3] = current->euid;
-	return current->uid;
-}
-
-asmlinkage int irix_getgid(struct pt_regs *regs)
-{
-	regs->regs[3] = current->egid;
-	return current->gid;
-}
-
-asmlinkage int irix_stime(int value)
-{
-	int err;
-	struct timespec tv;
-
-	tv.tv_sec = value;
-	tv.tv_nsec = 0;
-	err = security_settime(&tv, NULL);
-	if (err)
-		return err;
-
-	write_seqlock_irq(&xtime_lock);
-	xtime.tv_sec = value;
-	xtime.tv_nsec = 0;
-	ntp_clear();
-	write_sequnlock_irq(&xtime_lock);
-
-	return 0;
-}
-
-static inline void jiffiestotv(unsigned long jiffies, struct timeval *value)
-{
-	value->tv_usec = (jiffies % HZ) * (1000000 / HZ);
-	value->tv_sec = jiffies / HZ;
-}
-
-static inline void getitimer_real(struct itimerval *value)
-{
-	register unsigned long val, interval;
-
-	interval = current->it_real_incr;
-	val = 0;
-	if (del_timer(&current->real_timer)) {
-		unsigned long now = jiffies;
-		val = current->real_timer.expires;
-		add_timer(&current->real_timer);
-		/* look out for negative/zero itimer.. */
-		if (val <= now)
-			val = now+1;
-		val -= now;
-	}
-	jiffiestotv(val, &value->it_value);
-	jiffiestotv(interval, &value->it_interval);
-}
-
-asmlinkage unsigned int irix_alarm(unsigned int seconds)
-{
-	return alarm_setitimer(seconds);
-}
-
-asmlinkage int irix_pause(void)
-{
-	current->state = TASK_INTERRUPTIBLE;
-	schedule();
-
-	return -EINTR;
-}
-
-/* XXX need more than this... */
-asmlinkage int irix_mount(char __user *dev_name, char __user *dir_name,
-	unsigned long flags, char __user *type, void __user *data, int datalen)
-{
-	printk("[%s:%d] irix_mount(%p,%p,%08lx,%p,%p,%d)\n",
-	       current->comm, current->pid,
-	       dev_name, dir_name, flags, type, data, datalen);
-
-	return sys_mount(dev_name, dir_name, type, flags, data);
-}
-
-struct irix_statfs {
-	short f_type;
-	long  f_bsize, f_frsize, f_blocks, f_bfree, f_files, f_ffree;
-	char  f_fname[6], f_fpack[6];
-};
-
-asmlinkage int irix_statfs(const char __user *path,
-	struct irix_statfs __user *buf, int len, int fs_type)
-{
-	struct nameidata nd;
-	struct kstatfs kbuf;
-	int error, i;
-
-	/* We don't support this feature yet. */
-	if (fs_type) {
-		error = -EINVAL;
-		goto out;
-	}
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statfs))) {
-		error = -EFAULT;
-		goto out;
-	}
-
-	error = user_path_walk(path, &nd);
-	if (error)
-		goto out;
-
-	error = vfs_statfs(nd.path.dentry, &kbuf);
-	if (error)
-		goto dput_and_out;
-
-	error = __put_user(kbuf.f_type, &buf->f_type);
-	error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-	for (i = 0; i < 6; i++) {
-		error |= __put_user(0, &buf->f_fname[i]);
-		error |= __put_user(0, &buf->f_fpack[i]);
-	}
-
-dput_and_out:
-	path_put(&nd.path);
-out:
-	return error;
-}
-
-asmlinkage int irix_fstatfs(unsigned int fd, struct irix_statfs __user *buf)
-{
-	struct kstatfs kbuf;
-	struct file *file;
-	int error, i;
-
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statfs))) {
-		error = -EFAULT;
-		goto out;
-	}
-
-	if (!(file = fget(fd))) {
-		error = -EBADF;
-		goto out;
-	}
-
-	error = vfs_statfs(file->f_path.dentry, &kbuf);
-	if (error)
-		goto out_f;
-
-	error = __put_user(kbuf.f_type, &buf->f_type);
-	error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-
-	for (i = 0; i < 6; i++) {
-		error |= __put_user(0, &buf->f_fname[i]);
-		error |= __put_user(0, &buf->f_fpack[i]);
-	}
-
-out_f:
-	fput(file);
-out:
-	return error;
-}
-
-asmlinkage int irix_setpgrp(int flags)
-{
-	int error;
-
-#ifdef DEBUG_PROCGRPS
-	printk("[%s:%d] setpgrp(%d) ", current->comm, current->pid, flags);
-#endif
-	if(!flags)
-		error = task_pgrp_vnr(current);
-	else
-		error = sys_setsid();
-#ifdef DEBUG_PROCGRPS
-	printk("returning %d\n", error);
-#endif
-
-	return error;
-}
-
-asmlinkage int irix_times(struct tms __user *tbuf)
-{
-	int err = 0;
-
-	if (tbuf) {
-		if (!access_ok(VERIFY_WRITE, tbuf, sizeof *tbuf))
-			return -EFAULT;
-
-		err = __put_user(current->utime, &tbuf->tms_utime);
-		err |= __put_user(current->stime, &tbuf->tms_stime);
-		err |= __put_user(current->signal->cutime, &tbuf->tms_cutime);
-		err |= __put_user(current->signal->cstime, &tbuf->tms_cstime);
-	}
-
-	return err;
-}
-
-asmlinkage int irix_exec(struct pt_regs *regs)
-{
-	int error, base = 0;
-	char *filename;
-
-	if(regs->regs[2] == 1000)
-		base = 1;
-	filename = getname((char __user *) (long)regs->regs[base + 4]);
-	error = PTR_ERR(filename);
-	if (IS_ERR(filename))
-		return error;
-
-	error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5],
-	                  NULL, regs);
-	putname(filename);
-
-	return error;
-}
-
-asmlinkage int irix_exece(struct pt_regs *regs)
-{
-	int error, base = 0;
-	char *filename;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-	filename = getname((char __user *) (long)regs->regs[base + 4]);
-	error = PTR_ERR(filename);
-	if (IS_ERR(filename))
-		return error;
-	error = do_execve(filename, (char __user * __user *) (long)regs->regs[base + 5],
-	                  (char __user * __user *) (long)regs->regs[base + 6], regs);
-	putname(filename);
-
-	return error;
-}
-
-asmlinkage unsigned long irix_gethostid(void)
-{
-	printk("[%s:%d]: irix_gethostid() called...\n",
-	       current->comm, current->pid);
-
-	return -EINVAL;
-}
-
-asmlinkage unsigned long irix_sethostid(unsigned long val)
-{
-	printk("[%s:%d]: irix_sethostid(%08lx) called...\n",
-	       current->comm, current->pid, val);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_socket(int family, int type, int protocol)
-{
-	switch(type) {
-	case 1:
-		type = SOCK_DGRAM;
-		break;
-
-	case 2:
-		type = SOCK_STREAM;
-		break;
-
-	case 3:
-		type = 9; /* Invalid... */
-		break;
-
-	case 4:
-		type = SOCK_RAW;
-		break;
-
-	case 5:
-		type = SOCK_RDM;
-		break;
-
-	case 6:
-		type = SOCK_SEQPACKET;
-		break;
-
-	default:
-		break;
-	}
-
-	return sys_socket(family, type, protocol);
-}
-
-asmlinkage int irix_getdomainname(char __user *name, int len)
-{
-	int err;
-
-	down_read(&uts_sem);
-	if (len > __NEW_UTS_LEN)
-		len = __NEW_UTS_LEN;
-	err = copy_to_user(name, utsname()->domainname, len) ? -EFAULT : 0;
-	up_read(&uts_sem);
-
-	return err;
-}
-
-asmlinkage unsigned long irix_getpagesize(void)
-{
-	return PAGE_SIZE;
-}
-
-asmlinkage int irix_msgsys(int opcode, unsigned long arg0, unsigned long arg1,
-			   unsigned long arg2, unsigned long arg3,
-			   unsigned long arg4)
-{
-	switch (opcode) {
-	case 0:
-		return sys_msgget((key_t) arg0, (int) arg1);
-	case 1:
-		return sys_msgctl((int) arg0, (int) arg1,
-		                  (struct msqid_ds __user *)arg2);
-	case 2:
-		return sys_msgrcv((int) arg0, (struct msgbuf __user *) arg1,
-				  (size_t) arg2, (long) arg3, (int) arg4);
-	case 3:
-		return sys_msgsnd((int) arg0, (struct msgbuf __user *) arg1,
-				  (size_t) arg2, (int) arg3);
-	default:
-		return -EINVAL;
-	}
-}
-
-asmlinkage int irix_shmsys(int opcode, unsigned long arg0, unsigned long arg1,
-			   unsigned long arg2, unsigned long arg3)
-{
-	switch (opcode) {
-	case 0:
-		return do_shmat((int) arg0, (char __user *) arg1, (int) arg2,
-				 (unsigned long *) arg3);
-	case 1:
-		return sys_shmctl((int)arg0, (int)arg1,
-		                  (struct shmid_ds __user *)arg2);
-	case 2:
-		return sys_shmdt((char __user *)arg0);
-	case 3:
-		return sys_shmget((key_t) arg0, (int) arg1, (int) arg2);
-	default:
-		return -EINVAL;
-	}
-}
-
-asmlinkage int irix_semsys(int opcode, unsigned long arg0, unsigned long arg1,
-			   unsigned long arg2, int arg3)
-{
-	switch (opcode) {
-	case 0:
-		return sys_semctl((int) arg0, (int) arg1, (int) arg2,
-				  (union semun) arg3);
-	case 1:
-		return sys_semget((key_t) arg0, (int) arg1, (int) arg2);
-	case 2:
-		return sys_semop((int) arg0, (struct sembuf __user *)arg1,
-				 (unsigned int) arg2);
-	default:
-		return -EINVAL;
-	}
-}
-
-static inline loff_t llseek(struct file *file, loff_t offset, int origin)
-{
-	loff_t (*fn)(struct file *, loff_t, int);
-	loff_t retval;
-
-	fn = default_llseek;
-	if (file->f_op && file->f_op->llseek)
-	fn = file->f_op->llseek;
-	lock_kernel();
-	retval = fn(file, offset, origin);
-	unlock_kernel();
-
-	return retval;
-}
-
-asmlinkage int irix_lseek64(int fd, int _unused, int offhi, int offlow,
-                            int origin)
-{
-	struct file * file;
-	loff_t offset;
-	int retval;
-
-	retval = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto bad;
-	retval = -EINVAL;
-	if (origin > 2)
-		goto out_putf;
-
-	offset = llseek(file, ((loff_t) offhi << 32) | offlow, origin);
-	retval = (int) offset;
-
-out_putf:
-	fput(file);
-bad:
-	return retval;
-}
-
-asmlinkage int irix_sginap(int ticks)
-{
-	schedule_timeout_interruptible(ticks);
-	return 0;
-}
-
-asmlinkage int irix_sgikopt(char __user *istring, char __user *ostring, int len)
-{
-	return -EINVAL;
-}
-
-asmlinkage int irix_gettimeofday(struct timeval __user *tv)
-{
-	time_t sec;
-	long nsec, seq;
-	int err;
-
-	if (!access_ok(VERIFY_WRITE, tv, sizeof(struct timeval)))
-		return -EFAULT;
-
-	do {
-		seq = read_seqbegin(&xtime_lock);
-		sec = xtime.tv_sec;
-		nsec = xtime.tv_nsec;
-	} while (read_seqretry(&xtime_lock, seq));
-
-	err = __put_user(sec, &tv->tv_sec);
-	err |= __put_user((nsec / 1000), &tv->tv_usec);
-
-	return err;
-}
-
-#define IRIX_MAP_AUTOGROW 0x40
-
-asmlinkage unsigned long irix_mmap32(unsigned long addr, size_t len, int prot,
-				     int flags, int fd, off_t offset)
-{
-	struct file *file = NULL;
-	unsigned long retval;
-
-	if (!(flags & MAP_ANONYMOUS)) {
-		if (!(file = fget(fd)))
-			return -EBADF;
-
-		/* Ok, bad taste hack follows, try to think in something else
-		 * when reading this.  */
-		if (flags & IRIX_MAP_AUTOGROW) {
-			unsigned long old_pos;
-			long max_size = offset + len;
-
-			if (max_size > file->f_path.dentry->d_inode->i_size) {
-				old_pos = sys_lseek(fd, max_size - 1, 0);
-				sys_write(fd, (void __user *) "", 1);
-				sys_lseek(fd, old_pos, 0);
-			}
-		}
-	}
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
-	down_write(&current->mm->mmap_sem);
-	retval = do_mmap(file, addr, len, prot, flags, offset);
-	up_write(&current->mm->mmap_sem);
-	if (file)
-		fput(file);
-
-	return retval;
-}
-
-asmlinkage int irix_madvise(unsigned long addr, int len, int behavior)
-{
-	printk("[%s:%d] Wheee.. irix_madvise(%08lx,%d,%d)\n",
-	       current->comm, current->pid, addr, len, behavior);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_pagelock(char __user *addr, int len, int op)
-{
-	printk("[%s:%d] Wheee.. irix_pagelock(%p,%d,%d)\n",
-	       current->comm, current->pid, addr, len, op);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_quotactl(struct pt_regs *regs)
-{
-	printk("[%s:%d] Wheee.. irix_quotactl()\n",
-	       current->comm, current->pid);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_BSDsetpgrp(int pid, int pgrp)
-{
-	int error;
-
-#ifdef DEBUG_PROCGRPS
-	printk("[%s:%d] BSDsetpgrp(%d, %d) ", current->comm, current->pid,
-	       pid, pgrp);
-#endif
-	if(!pid)
-		pid = task_pid_vnr(current);
-
-	/* Wheee, weird sysv thing... */
-	if ((pgrp == 0) && (pid == task_pid_vnr(current)))
-		error = sys_setsid();
-	else
-		error = sys_setpgid(pid, pgrp);
-
-#ifdef DEBUG_PROCGRPS
-	printk("error = %d\n", error);
-#endif
-
-	return error;
-}
-
-asmlinkage int irix_systeminfo(int cmd, char __user *buf, int cnt)
-{
-	printk("[%s:%d] Wheee.. irix_systeminfo(%d,%p,%d)\n",
-	       current->comm, current->pid, cmd, buf, cnt);
-
-	return -EINVAL;
-}
-
-struct iuname {
-	char sysname[257], nodename[257], release[257];
-	char version[257], machine[257];
-	char m_type[257], base_rel[257];
-	char _unused0[257], _unused1[257], _unused2[257];
-	char _unused3[257], _unused4[257], _unused5[257];
-};
-
-asmlinkage int irix_uname(struct iuname __user *buf)
-{
-	down_read(&uts_sem);
-	if (copy_from_user(utsname()->sysname, buf->sysname, 65)
-	    || copy_from_user(utsname()->nodename, buf->nodename, 65)
-	    || copy_from_user(utsname()->release, buf->release, 65)
-	    || copy_from_user(utsname()->version, buf->version, 65)
-	    || copy_from_user(utsname()->machine, buf->machine, 65)) {
-		return -EFAULT;
-	}
-	up_read(&uts_sem);
-
-	return 1;
-}
-
-#undef DEBUG_XSTAT
-
-static int irix_xstat32_xlate(struct kstat *stat, void __user *ubuf)
-{
-	struct xstat32 {
-		u32 st_dev, st_pad1[3], st_ino, st_mode, st_nlink, st_uid, st_gid;
-		u32 st_rdev, st_pad2[2], st_size, st_pad3;
-		u32 st_atime0, st_atime1;
-		u32 st_mtime0, st_mtime1;
-		u32 st_ctime0, st_ctime1;
-		u32 st_blksize, st_blocks;
-		char st_fstype[16];
-		u32 st_pad4[8];
-	} ub;
-
-	if (!sysv_valid_dev(stat->dev) || !sysv_valid_dev(stat->rdev))
-		return -EOVERFLOW;
-	ub.st_dev     = sysv_encode_dev(stat->dev);
-	ub.st_ino     = stat->ino;
-	ub.st_mode    = stat->mode;
-	ub.st_nlink   = stat->nlink;
-	SET_UID(ub.st_uid, stat->uid);
-	SET_GID(ub.st_gid, stat->gid);
-	ub.st_rdev    = sysv_encode_dev(stat->rdev);
-#if BITS_PER_LONG == 32
-	if (stat->size > MAX_NON_LFS)
-		return -EOVERFLOW;
-#endif
-	ub.st_size    = stat->size;
-	ub.st_atime0  = stat->atime.tv_sec;
-	ub.st_atime1  = stat->atime.tv_nsec;
-	ub.st_mtime0  = stat->mtime.tv_sec;
-	ub.st_mtime1  = stat->atime.tv_nsec;
-	ub.st_ctime0  = stat->ctime.tv_sec;
-	ub.st_ctime1  = stat->atime.tv_nsec;
-	ub.st_blksize = stat->blksize;
-	ub.st_blocks  = stat->blocks;
-	strcpy(ub.st_fstype, "efs");
-
-	return copy_to_user(ubuf, &ub, sizeof(ub)) ? -EFAULT : 0;
-}
-
-static int irix_xstat64_xlate(struct kstat *stat, void __user *ubuf)
-{
-	struct xstat64 {
-		u32 st_dev; s32 st_pad1[3];
-		unsigned long long st_ino;
-		u32 st_mode;
-		u32 st_nlink; s32 st_uid; s32 st_gid; u32 st_rdev;
-		s32 st_pad2[2];
-		long long st_size;
-		s32 st_pad3;
-		struct { s32 tv_sec, tv_nsec; } st_atime, st_mtime, st_ctime;
-		s32 st_blksize;
-		long long  st_blocks;
-		char st_fstype[16];
-		s32 st_pad4[8];
-	} ks;
-
-	if (!sysv_valid_dev(stat->dev) || !sysv_valid_dev(stat->rdev))
-		return -EOVERFLOW;
-
-	ks.st_dev = sysv_encode_dev(stat->dev);
-	ks.st_pad1[0] = ks.st_pad1[1] = ks.st_pad1[2] = 0;
-	ks.st_ino = (unsigned long long) stat->ino;
-	ks.st_mode = (u32) stat->mode;
-	ks.st_nlink = (u32) stat->nlink;
-	ks.st_uid = (s32) stat->uid;
-	ks.st_gid = (s32) stat->gid;
-	ks.st_rdev = sysv_encode_dev(stat->rdev);
-	ks.st_pad2[0] = ks.st_pad2[1] = 0;
-	ks.st_size = (long long) stat->size;
-	ks.st_pad3 = 0;
-
-	/* XXX hackety hack... */
-	ks.st_atime.tv_sec = (s32) stat->atime.tv_sec;
-	ks.st_atime.tv_nsec = stat->atime.tv_nsec;
-	ks.st_mtime.tv_sec = (s32) stat->mtime.tv_sec;
-	ks.st_mtime.tv_nsec = stat->mtime.tv_nsec;
-	ks.st_ctime.tv_sec = (s32) stat->ctime.tv_sec;
-	ks.st_ctime.tv_nsec = stat->ctime.tv_nsec;
-
-	ks.st_blksize = (s32) stat->blksize;
-	ks.st_blocks = (long long) stat->blocks;
-	memset(ks.st_fstype, 0, 16);
-	ks.st_pad4[0] = ks.st_pad4[1] = ks.st_pad4[2] = ks.st_pad4[3] = 0;
-	ks.st_pad4[4] = ks.st_pad4[5] = ks.st_pad4[6] = ks.st_pad4[7] = 0;
-
-	/* Now write it all back. */
-	return copy_to_user(ubuf, &ks, sizeof(ks)) ? -EFAULT : 0;
-}
-
-asmlinkage int irix_xstat(int version, char __user *filename, struct stat __user *statbuf)
-{
-	int retval;
-	struct kstat stat;
-
-#ifdef DEBUG_XSTAT
-	printk("[%s:%d] Wheee.. irix_xstat(%d,%s,%p) ",
-	       current->comm, current->pid, version, filename, statbuf);
-#endif
-
-	retval = vfs_stat(filename, &stat);
-	if (!retval) {
-		switch(version) {
-			case 2:
-				retval = irix_xstat32_xlate(&stat, statbuf);
-				break;
-			case 3:
-				retval = irix_xstat64_xlate(&stat, statbuf);
-				break;
-			default:
-				retval = -EINVAL;
-		}
-	}
-	return retval;
-}
-
-asmlinkage int irix_lxstat(int version, char __user *filename, struct stat __user *statbuf)
-{
-	int error;
-	struct kstat stat;
-
-#ifdef DEBUG_XSTAT
-	printk("[%s:%d] Wheee.. irix_lxstat(%d,%s,%p) ",
-	       current->comm, current->pid, version, filename, statbuf);
-#endif
-
-	error = vfs_lstat(filename, &stat);
-
-	if (!error) {
-		switch (version) {
-			case 2:
-				error = irix_xstat32_xlate(&stat, statbuf);
-				break;
-			case 3:
-				error = irix_xstat64_xlate(&stat, statbuf);
-				break;
-			default:
-				error = -EINVAL;
-		}
-	}
-	return error;
-}
-
-asmlinkage int irix_fxstat(int version, int fd, struct stat __user *statbuf)
-{
-	int error;
-	struct kstat stat;
-
-#ifdef DEBUG_XSTAT
-	printk("[%s:%d] Wheee.. irix_fxstat(%d,%d,%p) ",
-	       current->comm, current->pid, version, fd, statbuf);
-#endif
-
-	error = vfs_fstat(fd, &stat);
-	if (!error) {
-		switch (version) {
-			case 2:
-				error = irix_xstat32_xlate(&stat, statbuf);
-				break;
-			case 3:
-				error = irix_xstat64_xlate(&stat, statbuf);
-				break;
-			default:
-				error = -EINVAL;
-		}
-	}
-	return error;
-}
-
-asmlinkage int irix_xmknod(int ver, char __user *filename, int mode, unsigned dev)
-{
-	int retval;
-	printk("[%s:%d] Wheee.. irix_xmknod(%d,%s,%x,%x)\n",
-	       current->comm, current->pid, ver, filename, mode, dev);
-
-	switch(ver) {
-	case 2:
-		/* shouldn't we convert here as well as on stat()? */
-		retval = sys_mknod(filename, mode, dev);
-		break;
-
-	default:
-		retval = -EINVAL;
-		break;
-	};
-
-	return retval;
-}
-
-asmlinkage int irix_swapctl(int cmd, char __user *arg)
-{
-	printk("[%s:%d] Wheee.. irix_swapctl(%d,%p)\n",
-	       current->comm, current->pid, cmd, arg);
-
-	return -EINVAL;
-}
-
-struct irix_statvfs {
-	u32 f_bsize; u32 f_frsize; u32 f_blocks;
-	u32 f_bfree; u32 f_bavail; u32 f_files; u32 f_ffree; u32 f_favail;
-	u32 f_fsid; char f_basetype[16];
-	u32 f_flag; u32 f_namemax;
-	char	f_fstr[32]; u32 f_filler[16];
-};
-
-asmlinkage int irix_statvfs(char __user *fname, struct irix_statvfs __user *buf)
-{
-	struct nameidata nd;
-	struct kstatfs kbuf;
-	int error, i;
-
-	printk("[%s:%d] Wheee.. irix_statvfs(%s,%p)\n",
-	       current->comm, current->pid, fname, buf);
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs)))
-		return -EFAULT;
-
-	error = user_path_walk(fname, &nd);
-	if (error)
-		goto out;
-	error = vfs_statfs(nd.path.dentry, &kbuf);
-	if (error)
-		goto dput_and_out;
-
-	error |= __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-	error |= __put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
-#ifdef __MIPSEB__
-	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
-#else
-	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
-#endif
-	for (i = 0; i < 16; i++)
-		error |= __put_user(0, &buf->f_basetype[i]);
-	error |= __put_user(0, &buf->f_flag);
-	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
-	for (i = 0; i < 32; i++)
-		error |= __put_user(0, &buf->f_fstr[i]);
-
-dput_and_out:
-	path_put(&nd.path);
-out:
-	return error;
-}
-
-asmlinkage int irix_fstatvfs(int fd, struct irix_statvfs __user *buf)
-{
-	struct kstatfs kbuf;
-	struct file *file;
-	int error, i;
-
-	printk("[%s:%d] Wheee.. irix_fstatvfs(%d,%p)\n",
-	       current->comm, current->pid, fd, buf);
-
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs)))
-		return -EFAULT;
-
-	if (!(file = fget(fd))) {
-		error = -EBADF;
-		goto out;
-	}
-	error = vfs_statfs(file->f_path.dentry, &kbuf);
-	if (error)
-		goto out_f;
-
-	error = __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bavail); /* XXX hackety hack... */
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-	error |= __put_user(kbuf.f_ffree, &buf->f_favail); /* XXX hackety hack... */
-#ifdef __MIPSEB__
-	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
-#else
-	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
-#endif
-	for(i = 0; i < 16; i++)
-		error |= __put_user(0, &buf->f_basetype[i]);
-	error |= __put_user(0, &buf->f_flag);
-	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
-	error |= __clear_user(&buf->f_fstr, sizeof(buf->f_fstr)) ? -EFAULT : 0;
-
-out_f:
-	fput(file);
-out:
-	return error;
-}
-
-asmlinkage int irix_priocntl(struct pt_regs *regs)
-{
-	printk("[%s:%d] Wheee.. irix_priocntl()\n",
-	       current->comm, current->pid);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_sigqueue(int pid, int sig, int code, int val)
-{
-	printk("[%s:%d] Wheee.. irix_sigqueue(%d,%d,%d,%d)\n",
-	       current->comm, current->pid, pid, sig, code, val);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_truncate64(char __user *name, int pad, int size1, int size2)
-{
-	int retval;
-
-	if (size1) {
-		retval = -EINVAL;
-		goto out;
-	}
-	retval = sys_truncate(name, size2);
-
-out:
-	return retval;
-}
-
-asmlinkage int irix_ftruncate64(int fd, int pad, int size1, int size2)
-{
-	int retval;
-
-	if (size1) {
-		retval = -EINVAL;
-		goto out;
-	}
-	retval = sys_ftruncate(fd, size2);
-
-out:
-	return retval;
-}
-
-asmlinkage int irix_mmap64(struct pt_regs *regs)
-{
-	int len, prot, flags, fd, off1, off2, error, base = 0;
-	unsigned long addr, pgoff, *sp;
-	struct file *file = NULL;
-	int err;
-
-	if (regs->regs[2] == 1000)
-		base = 1;
-	sp = (unsigned long *) (regs->regs[29] + 16);
-	addr = regs->regs[base + 4];
-	len = regs->regs[base + 5];
-	prot = regs->regs[base + 6];
-	if (!base) {
-		flags = regs->regs[base + 7];
-		if (!access_ok(VERIFY_READ, sp, (4 * sizeof(unsigned long))))
-			return -EFAULT;
-		fd = sp[0];
-		err = __get_user(off1, &sp[1]);
-		err |= __get_user(off2, &sp[2]);
-	} else {
-		if (!access_ok(VERIFY_READ, sp, (5 * sizeof(unsigned long))))
-			return -EFAULT;
-		err = __get_user(flags, &sp[0]);
-		err |= __get_user(fd, &sp[1]);
-		err |= __get_user(off1, &sp[2]);
-		err |= __get_user(off2, &sp[3]);
-	}
-
-	if (err)
-		return err;
-
-	if (off1 & PAGE_MASK)
-		return -EOVERFLOW;
-
-	pgoff = (off1 << (32 - PAGE_SHIFT)) | (off2 >> PAGE_SHIFT);
-
-	if (!(flags & MAP_ANONYMOUS)) {
-		if (!(file = fget(fd)))
-			return -EBADF;
-
-		/* Ok, bad taste hack follows, try to think in something else
-		   when reading this */
-		if (flags & IRIX_MAP_AUTOGROW) {
-			unsigned long old_pos;
-			long max_size = off2 + len;
-
-			if (max_size > file->f_path.dentry->d_inode->i_size) {
-				old_pos = sys_lseek(fd, max_size - 1, 0);
-				sys_write(fd, (void __user *) "", 1);
-				sys_lseek(fd, old_pos, 0);
-			}
-		}
-	}
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-
-	return error;
-}
-
-asmlinkage int irix_dmi(struct pt_regs *regs)
-{
-	printk("[%s:%d] Wheee.. irix_dmi()\n",
-	       current->comm, current->pid);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_pread(int fd, char __user *buf, int cnt, int off64,
-			  int off1, int off2)
-{
-	printk("[%s:%d] Wheee.. irix_pread(%d,%p,%d,%d,%d,%d)\n",
-	       current->comm, current->pid, fd, buf, cnt, off64, off1, off2);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_pwrite(int fd, char __user *buf, int cnt, int off64,
-			   int off1, int off2)
-{
-	printk("[%s:%d] Wheee.. irix_pwrite(%d,%p,%d,%d,%d,%d)\n",
-	       current->comm, current->pid, fd, buf, cnt, off64, off1, off2);
-
-	return -EINVAL;
-}
-
-asmlinkage int irix_sgifastpath(int cmd, unsigned long arg0, unsigned long arg1,
-				unsigned long arg2, unsigned long arg3,
-				unsigned long arg4, unsigned long arg5)
-{
-	printk("[%s:%d] Wheee.. irix_fastpath(%d,%08lx,%08lx,%08lx,%08lx,"
-	       "%08lx,%08lx)\n",
-	       current->comm, current->pid, cmd, arg0, arg1, arg2,
-	       arg3, arg4, arg5);
-
-	return -EINVAL;
-}
-
-struct irix_statvfs64 {
-	u32  f_bsize; u32 f_frsize;
-	u64  f_blocks; u64 f_bfree; u64 f_bavail;
-	u64  f_files; u64 f_ffree; u64 f_favail;
-	u32  f_fsid;
-	char f_basetype[16];
-	u32  f_flag; u32 f_namemax;
-	char f_fstr[32];
-	u32  f_filler[16];
-};
-
-asmlinkage int irix_statvfs64(char __user *fname, struct irix_statvfs64 __user *buf)
-{
-	struct nameidata nd;
-	struct kstatfs kbuf;
-	int error, i;
-
-	printk("[%s:%d] Wheee.. irix_statvfs64(%s,%p)\n",
-	       current->comm, current->pid, fname, buf);
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs64))) {
-		error = -EFAULT;
-		goto out;
-	}
-
-	error = user_path_walk(fname, &nd);
-	if (error)
-		goto out;
-	error = vfs_statfs(nd.path.dentry, &kbuf);
-	if (error)
-		goto dput_and_out;
-
-	error = __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-	error |= __put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
-#ifdef __MIPSEB__
-	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
-#else
-	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
-#endif
-	for(i = 0; i < 16; i++)
-		error |= __put_user(0, &buf->f_basetype[i]);
-	error |= __put_user(0, &buf->f_flag);
-	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
-	for(i = 0; i < 32; i++)
-		error |= __put_user(0, &buf->f_fstr[i]);
-
-dput_and_out:
-	path_put(&nd.path);
-out:
-	return error;
-}
-
-asmlinkage int irix_fstatvfs64(int fd, struct irix_statvfs __user *buf)
-{
-	struct kstatfs kbuf;
-	struct file *file;
-	int error, i;
-
-	printk("[%s:%d] Wheee.. irix_fstatvfs64(%d,%p)\n",
-	       current->comm, current->pid, fd, buf);
-
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(struct irix_statvfs))) {
-		error = -EFAULT;
-		goto out;
-	}
-	if (!(file = fget(fd))) {
-		error = -EBADF;
-		goto out;
-	}
-	error = vfs_statfs(file->f_path.dentry, &kbuf);
-	if (error)
-		goto out_f;
-
-	error = __put_user(kbuf.f_bsize, &buf->f_bsize);
-	error |= __put_user(kbuf.f_frsize, &buf->f_frsize);
-	error |= __put_user(kbuf.f_blocks, &buf->f_blocks);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bfree);
-	error |= __put_user(kbuf.f_bfree, &buf->f_bavail);  /* XXX hackety hack... */
-	error |= __put_user(kbuf.f_files, &buf->f_files);
-	error |= __put_user(kbuf.f_ffree, &buf->f_ffree);
-	error |= __put_user(kbuf.f_ffree, &buf->f_favail);  /* XXX hackety hack... */
-#ifdef __MIPSEB__
-	error |= __put_user(kbuf.f_fsid.val[1], &buf->f_fsid);
-#else
-	error |= __put_user(kbuf.f_fsid.val[0], &buf->f_fsid);
-#endif
-	for(i = 0; i < 16; i++)
-		error |= __put_user(0, &buf->f_basetype[i]);
-	error |= __put_user(0, &buf->f_flag);
-	error |= __put_user(kbuf.f_namelen, &buf->f_namemax);
-	error |= __clear_user(buf->f_fstr, sizeof(buf->f_fstr[i])) ? -EFAULT : 0;
-
-out_f:
-	fput(file);
-out:
-	return error;
-}
-
-asmlinkage int irix_getmountid(char __user *fname, unsigned long __user *midbuf)
-{
-	int err;
-
-	printk("[%s:%d] irix_getmountid(%s, %p)\n",
-	       current->comm, current->pid, fname, midbuf);
-	if (!access_ok(VERIFY_WRITE, midbuf, (sizeof(unsigned long) * 4)))
-		return -EFAULT;
-
-	/*
-	 * The idea with this system call is that when trying to determine
-	 * 'pwd' and it's a toss-up for some reason, userland can use the
-	 * fsid of the filesystem to try and make the right decision, but
-	 * we don't have this so for now. XXX
-	 */
-	err = __put_user(0, &midbuf[0]);
-	err |= __put_user(0, &midbuf[1]);
-	err |= __put_user(0, &midbuf[2]);
-	err |= __put_user(0, &midbuf[3]);
-
-	return err;
-}
-
-asmlinkage int irix_nsproc(unsigned long entry, unsigned long mask,
-			   unsigned long arg, unsigned long sp, int slen)
-{
-	printk("[%s:%d] Wheee.. irix_nsproc(%08lx,%08lx,%08lx,%08lx,%d)\n",
-	       current->comm, current->pid, entry, mask, arg, sp, slen);
-
-	return -EINVAL;
-}
-
-#undef DEBUG_GETDENTS
-
-struct irix_dirent32 {
-	u32  d_ino;
-	u32  d_off;
-	unsigned short  d_reclen;
-	char d_name[1];
-};
-
-struct irix_dirent32_callback {
-	struct irix_dirent32 __user *current_dir;
-	struct irix_dirent32 __user *previous;
-	int count;
-	int error;
-};
-
-#define NAME_OFFSET32(de) ((int) ((de)->d_name - (char *) (de)))
-#define ROUND_UP32(x) (((x)+sizeof(u32)-1) & ~(sizeof(u32)-1))
-
-static int irix_filldir32(void *__buf, const char *name,
-	int namlen, loff_t offset, u64 ino, unsigned int d_type)
-{
-	struct irix_dirent32 __user *dirent;
-	struct irix_dirent32_callback *buf = __buf;
-	unsigned short reclen = ROUND_UP32(NAME_OFFSET32(dirent) + namlen + 1);
-	int err = 0;
-	u32 d_ino;
-
-#ifdef DEBUG_GETDENTS
-	printk("\nirix_filldir32[reclen<%d>namlen<%d>count<%d>]",
-	       reclen, namlen, buf->count);
-#endif
-	buf->error = -EINVAL;	/* only used if we fail.. */
-	if (reclen > buf->count)
-		return -EINVAL;
-	d_ino = ino;
-	if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
-		return -EOVERFLOW;
-	dirent = buf->previous;
-	if (dirent)
-		err = __put_user(offset, &dirent->d_off);
-	dirent = buf->current_dir;
-	err |= __put_user(dirent, &buf->previous);
-	err |= __put_user(d_ino, &dirent->d_ino);
-	err |= __put_user(reclen, &dirent->d_reclen);
-	err |= copy_to_user((char __user *)dirent->d_name, name, namlen) ? -EFAULT : 0;
-	err |= __put_user(0, &dirent->d_name[namlen]);
-	dirent = (struct irix_dirent32 __user *) ((char __user *) dirent + reclen);
-
-	buf->current_dir = dirent;
-	buf->count -= reclen;
-
-	return err;
-}
-
-asmlinkage int irix_ngetdents(unsigned int fd, void __user * dirent,
-	unsigned int count, int __user *eob)
-{
-	struct file *file;
-	struct irix_dirent32 __user *lastdirent;
-	struct irix_dirent32_callback buf;
-	int error;
-
-#ifdef DEBUG_GETDENTS
-	printk("[%s:%d] ngetdents(%d, %p, %d, %p) ", current->comm,
-	       current->pid, fd, dirent, count, eob);
-#endif
-	error = -EBADF;
-	file = fget(fd);
-	if (!file)
-		goto out;
-
-	buf.current_dir = (struct irix_dirent32 __user *) dirent;
-	buf.previous = NULL;
-	buf.count = count;
-	buf.error = 0;
-
-	error = vfs_readdir(file, irix_filldir32, &buf);
-	if (error < 0)
-		goto out_putf;
-
-	error = buf.error;
-	lastdirent = buf.previous;
-	if (lastdirent) {
-		put_user(file->f_pos, &lastdirent->d_off);
-		error = count - buf.count;
-	}
-
-	if (put_user(0, eob) < 0) {
-		error = -EFAULT;
-		goto out_putf;
-	}
-
-#ifdef DEBUG_GETDENTS
-	printk("eob=%d returning %d\n", *eob, count - buf.count);
-#endif
-	error = count - buf.count;
-
-out_putf:
-	fput(file);
-out:
-	return error;
-}
-
-struct irix_dirent64 {
-	u64            d_ino;
-	u64            d_off;
-	unsigned short d_reclen;
-	char           d_name[1];
-};
-
-struct irix_dirent64_callback {
-	struct irix_dirent64 __user *curr;
-	struct irix_dirent64 __user *previous;
-	int count;
-	int error;
-};
-
-#define NAME_OFFSET64(de) ((int) ((de)->d_name - (char *) (de)))
-#define ROUND_UP64(x) (((x)+sizeof(u64)-1) & ~(sizeof(u64)-1))
-
-static int irix_filldir64(void *__buf, const char *name,
-	int namlen, loff_t offset, u64 ino, unsigned int d_type)
-{
-	struct irix_dirent64 __user *dirent;
-	struct irix_dirent64_callback * buf = __buf;
-	unsigned short reclen = ROUND_UP64(NAME_OFFSET64(dirent) + namlen + 1);
-	int err = 0;
-
-	if (!access_ok(VERIFY_WRITE, buf, sizeof(*buf)))
-		return -EFAULT;
-
-	if (__put_user(-EINVAL, &buf->error))	/* only used if we fail.. */
-		return -EFAULT;
-	if (reclen > buf->count)
-		return -EINVAL;
-	dirent = buf->previous;
-	if (dirent)
-		err = __put_user(offset, &dirent->d_off);
-	dirent = buf->curr;
-	buf->previous = dirent;
-	err |= __put_user(ino, &dirent->d_ino);
-	err |= __put_user(reclen, &dirent->d_reclen);
-	err |= __copy_to_user((char __user *)dirent->d_name, name, namlen)
-	       ? -EFAULT : 0;
-	err |= __put_user(0, &dirent->d_name[namlen]);
-
-	dirent = (struct irix_dirent64 __user *) ((char __user *) dirent + reclen);
-
-	buf->curr = dirent;
-	buf->count -= reclen;
-
-	return err;
-}
-
-asmlinkage int irix_getdents64(int fd, void __user *dirent, int cnt)
-{
-	struct file *file;
-	struct irix_dirent64 __user *lastdirent;
-	struct irix_dirent64_callback buf;
-	int error;
-
-#ifdef DEBUG_GETDENTS
-	printk("[%s:%d] getdents64(%d, %p, %d) ", current->comm,
-	       current->pid, fd, dirent, cnt);
-#endif
-	error = -EBADF;
-	if (!(file = fget(fd)))
-		goto out;
-
-	error = -EFAULT;
-	if (!access_ok(VERIFY_WRITE, dirent, cnt))
-		goto out_f;
-
-	error = -EINVAL;
-	if (cnt < (sizeof(struct irix_dirent64) + 255))
-		goto out_f;
-
-	buf.curr = (struct irix_dirent64 __user *) dirent;
-	buf.previous = NULL;
-	buf.count = cnt;
-	buf.error = 0;
-	error = vfs_readdir(file, irix_filldir64, &buf);
-	if (error < 0)
-		goto out_f;
-	lastdirent = buf.previous;
-	if (!lastdirent) {
-		error = buf.error;
-		goto out_f;
-	}
-	if (put_user(file->f_pos, &lastdirent->d_off))
-		return -EFAULT;
-#ifdef DEBUG_GETDENTS
-	printk("returning %d\n", cnt - buf.count);
-#endif
-	error = cnt - buf.count;
-
-out_f:
-	fput(file);
-out:
-	return error;
-}
-
-asmlinkage int irix_ngetdents64(int fd, void __user *dirent, int cnt, int *eob)
-{
-	struct file *file;
-	struct irix_dirent64 __user *lastdirent;
-	struct irix_dirent64_callback buf;
-	int error;
-
-#ifdef DEBUG_GETDENTS
-	printk("[%s:%d] ngetdents64(%d, %p, %d) ", current->comm,
-	       current->pid, fd, dirent, cnt);
-#endif
-	error = -EBADF;
-	if (!(file = fget(fd)))
-		goto out;
-
-	error = -EFAULT;
-	if (!access_ok(VERIFY_WRITE, dirent, cnt) ||
-	    !access_ok(VERIFY_WRITE, eob, sizeof(*eob)))
-		goto out_f;
-
-	error = -EINVAL;
-	if (cnt < (sizeof(struct irix_dirent64) + 255))
-		goto out_f;
-
-	*eob = 0;
-	buf.curr = (struct irix_dirent64 __user *) dirent;
-	buf.previous = NULL;
-	buf.count = cnt;
-	buf.error = 0;
-	error = vfs_readdir(file, irix_filldir64, &buf);
-	if (error < 0)
-		goto out_f;
-	lastdirent = buf.previous;
-	if (!lastdirent) {
-		error = buf.error;
-		goto out_f;
-	}
-	if (put_user(file->f_pos, &lastdirent->d_off))
-		return -EFAULT;
-#ifdef DEBUG_GETDENTS
-	printk("eob=%d returning %d\n", *eob, cnt - buf.count);
-#endif
-	error = cnt - buf.count;
-
-out_f:
-	fput(file);
-out:
-	return error;
-}
-
-asmlinkage int irix_uadmin(unsigned long op, unsigned long func, unsigned long arg)
-{
-	int retval;
-
-	switch (op) {
-	case 1:
-		/* Reboot */
-		printk("[%s:%d] irix_uadmin: Wants to reboot...\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 2:
-		/* Shutdown */
-		printk("[%s:%d] irix_uadmin: Wants to shutdown...\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 4:
-		/* Remount-root */
-		printk("[%s:%d] irix_uadmin: Wants to remount root...\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 8:
-		/* Kill all tasks. */
-		printk("[%s:%d] irix_uadmin: Wants to kill all tasks...\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 256:
-		/* Set magic mushrooms... */
-		printk("[%s:%d] irix_uadmin: Wants to set magic mushroom[%d]...\n",
-		       current->comm, current->pid, (int) func);
-		retval = -EINVAL;
-		goto out;
-
-	default:
-		printk("[%s:%d] irix_uadmin: Unknown operation [%d]...\n",
-		       current->comm, current->pid, (int) op);
-		retval = -EINVAL;
-		goto out;
-	};
-
-out:
-	return retval;
-}
-
-asmlinkage int irix_utssys(char __user *inbuf, int arg, int type, char __user *outbuf)
-{
-	int retval;
-
-	switch(type) {
-	case 0:
-		/* uname() */
-		retval = irix_uname((struct iuname __user *)inbuf);
-		goto out;
-
-	case 2:
-		/* ustat() */
-		printk("[%s:%d] irix_utssys: Wants to do ustat()\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 3:
-		/* fusers() */
-		printk("[%s:%d] irix_utssys: Wants to do fusers()\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	default:
-		printk("[%s:%d] irix_utssys: Wants to do unknown type[%d]\n",
-		       current->comm, current->pid, (int) type);
-		retval = -EINVAL;
-		goto out;
-	}
-
-out:
-	return retval;
-}
-
-#undef DEBUG_FCNTL
-
-#define IRIX_F_ALLOCSP 10
-
-asmlinkage int irix_fcntl(int fd, int cmd, int arg)
-{
-	int retval;
-
-#ifdef DEBUG_FCNTL
-	printk("[%s:%d] irix_fcntl(%d, %d, %d) ", current->comm,
-	       current->pid, fd, cmd, arg);
-#endif
-	if (cmd == IRIX_F_ALLOCSP){
-		return 0;
-	}
-	retval = sys_fcntl(fd, cmd, arg);
-#ifdef DEBUG_FCNTL
-	printk("%d\n", retval);
-#endif
-	return retval;
-}
-
-asmlinkage int irix_ulimit(int cmd, int arg)
-{
-	int retval;
-
-	switch(cmd) {
-	case 1:
-		printk("[%s:%d] irix_ulimit: Wants to get file size limit.\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 2:
-		printk("[%s:%d] irix_ulimit: Wants to set file size limit.\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 3:
-		printk("[%s:%d] irix_ulimit: Wants to get brk limit.\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	case 4:
-#if 0
-		printk("[%s:%d] irix_ulimit: Wants to get fd limit.\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-#endif
-		retval = current->signal->rlim[RLIMIT_NOFILE].rlim_cur;
-		goto out;
-
-	case 5:
-		printk("[%s:%d] irix_ulimit: Wants to get txt offset.\n",
-		       current->comm, current->pid);
-		retval = -EINVAL;
-		goto out;
-
-	default:
-		printk("[%s:%d] irix_ulimit: Unknown command [%d].\n",
-		       current->comm, current->pid, cmd);
-		retval = -EINVAL;
-		goto out;
-	}
-out:
-	return retval;
-}
-
-asmlinkage int irix_unimp(struct pt_regs *regs)
-{
-	printk("irix_unimp [%s:%d] v0=%d v1=%d a0=%08lx a1=%08lx a2=%08lx "
-	       "a3=%08lx\n", current->comm, current->pid,
-	       (int) regs->regs[2], (int) regs->regs[3],
-	       regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]);
-
-	return -ENOSYS;
-}
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index f9165d1a17bf..426cced1e9dc 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -23,6 +23,8 @@
 #include <linux/bootmem.h>
 #include <linux/interrupt.h>
 #include <linux/ptrace.h>
+#include <linux/kgdb.h>
+#include <linux/kdebug.h>
 
 #include <asm/bootinfo.h>
 #include <asm/branch.h>
@@ -71,7 +73,6 @@ extern asmlinkage void handle_reserved(void);
 extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
 	struct mips_fpu_struct *ctx, int has_fpu);
 
-void (*board_watchpoint_handler)(struct pt_regs *regs);
 void (*board_be_init)(void);
 int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
 void (*board_nmi_handler_setup)(void);
@@ -249,11 +250,11 @@ static void __show_regs(const struct pt_regs *regs)
 	/*
 	 * Saved cp0 registers
 	 */
-	printk("epc   : %0*lx ", field, regs->cp0_epc);
-	print_symbol("%s ", regs->cp0_epc);
+	printk("epc   : %0*lx %pS\n", field, regs->cp0_epc,
+	       (void *) regs->cp0_epc);
 	printk("    %s\n", print_tainted());
-	printk("ra    : %0*lx ", field, regs->regs[31]);
-	print_symbol("%s\n", regs->regs[31]);
+	printk("ra    : %0*lx %pS\n", field, regs->regs[31],
+	       (void *) regs->regs[31]);
 
 	printk("Status: %08x    ", (uint32_t) regs->cp0_status);
 
@@ -426,6 +427,10 @@ asmlinkage void do_be(struct pt_regs *regs)
 	printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
 	       data ? "Data" : "Instruction",
 	       field, regs->cp0_epc, field, regs->regs[31]);
+	if (notify_die(DIE_OOPS, "bus error", regs, SIGBUS, 0, 0)
+	    == NOTIFY_STOP)
+		return;
+
 	die_if_kernel("Oops", regs);
 	force_sig(SIGBUS, current);
 }
@@ -624,6 +629,9 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
 {
 	siginfo_t info;
 
+	if (notify_die(DIE_FP, "FP exception", regs, SIGFPE, 0, 0)
+	    == NOTIFY_STOP)
+		return;
 	die_if_kernel("FP exception in kernel code", regs);
 
 	if (fcr31 & FPU_CSR_UNI_X) {
@@ -683,6 +691,9 @@ static void do_trap_or_bp(struct pt_regs *regs, unsigned int code,
 	siginfo_t info;
 	char b[40];
 
+	if (notify_die(DIE_TRAP, str, regs, code, 0, 0) == NOTIFY_STOP)
+		return;
+
 	/*
 	 * A short test says that IRIX 5.3 sends SIGTRAP for all trap
 	 * insns, even for trap and break codes that indicate arithmetic
@@ -763,6 +774,10 @@ asmlinkage void do_ri(struct pt_regs *regs)
 	unsigned int opcode = 0;
 	int status = -1;
 
+	if (notify_die(DIE_RI, "RI Fault", regs, SIGSEGV, 0, 0)
+	    == NOTIFY_STOP)
+		return;
+
 	die_if_kernel("Reserved instruction in kernel code", regs);
 
 	if (unlikely(compute_return_epc(regs) < 0))
@@ -892,11 +907,6 @@ asmlinkage void do_mdmx(struct pt_regs *regs)
 
 asmlinkage void do_watch(struct pt_regs *regs)
 {
-	if (board_watchpoint_handler) {
-		(*board_watchpoint_handler)(regs);
-		return;
-	}
-
 	/*
 	 * We use the watch exception where available to detect stack
 	 * overflows.
@@ -1543,6 +1553,11 @@ void __init trap_init(void)
 	extern char except_vec4;
 	unsigned long i;
 
+#if defined(CONFIG_KGDB)
+	if (kgdb_early_setup)
+		return;	/* Already done */
+#endif
+
 	if (cpu_has_veic || cpu_has_vint)
 		ebase = (unsigned long) alloc_bootmem_low_pages(0x200 + VECTORSPACING*64);
 	else
diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c
index a56c15026965..d1ac7a25c856 100644
--- a/arch/mips/lasat/interrupt.c
+++ b/arch/mips/lasat/interrupt.c
@@ -22,8 +22,8 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 
-#include <asm/bootinfo.h>
 #include <asm/irq_cpu.h>
+#include <asm/lasat/lasat.h>
 #include <asm/lasat/lasatint.h>
 
 #include <irq.h>
@@ -112,23 +112,18 @@ void __init arch_init_irq(void)
 {
 	int i;
 
-	switch (mips_machtype) {
-	case MACH_LASAT_100:
-		lasat_int_status = (void *)LASAT_INT_STATUS_REG_100;
-		lasat_int_mask = (void *)LASAT_INT_MASK_REG_100;
-		lasat_int_mask_shift = LASATINT_MASK_SHIFT_100;
-		get_int_status = get_int_status_100;
-		*lasat_int_mask = 0;
-		break;
-	case MACH_LASAT_200:
+	if (IS_LASAT_200()) {
 		lasat_int_status = (void *)LASAT_INT_STATUS_REG_200;
 		lasat_int_mask = (void *)LASAT_INT_MASK_REG_200;
 		lasat_int_mask_shift = LASATINT_MASK_SHIFT_200;
 		get_int_status = get_int_status_200;
 		*lasat_int_mask &= 0xffff;
-		break;
-	default:
-		panic("arch_init_irq: mips_machtype incorrect");
+	} else {
+		lasat_int_status = (void *)LASAT_INT_STATUS_REG_100;
+		lasat_int_mask = (void *)LASAT_INT_MASK_REG_100;
+		lasat_int_mask_shift = LASATINT_MASK_SHIFT_100;
+		get_int_status = get_int_status_100;
+		*lasat_int_mask = 0;
 	}
 
 	mips_cpu_irq_init();
diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c
index 31e328b3814d..577bb463a871 100644
--- a/arch/mips/lasat/lasat_board.c
+++ b/arch/mips/lasat/lasat_board.c
@@ -24,7 +24,6 @@
 #include <linux/string.h>
 #include <linux/ctype.h>
 #include <linux/mutex.h>
-#include <asm/bootinfo.h>
 #include <asm/addrspace.h>
 #include "at93c.h"
 /* New model description table */
@@ -66,7 +65,7 @@ static void init_flash_sizes(void)
 	ls[LASAT_MTD_SERVICE] = 0xC0000;
 	ls[LASAT_MTD_NORMAL] = 0x100000;
 
-	if (mips_machtype == MACH_LASAT_100) {
+	if (!IS_LASAT_200()) {
 		lasat_board_info.li_flash_base = 0x1e000000;
 
 		lb[LASAT_MTD_BOOTLOADER] = 0x1e400000;
diff --git a/arch/mips/lasat/prom.c b/arch/mips/lasat/prom.c
index 209edcc26f07..6acc6cb85f0a 100644
--- a/arch/mips/lasat/prom.c
+++ b/arch/mips/lasat/prom.c
@@ -86,18 +86,16 @@ void __init prom_init(void)
 
 	setup_prom_vectors();
 
-	if (current_cpu_data.cputype == CPU_R5000) {
+	if (IS_LASAT_200()) {
 		printk(KERN_INFO "LASAT 200 board\n");
-		mips_machtype = MACH_LASAT_200;
 		lasat_ndelay_divider = LASAT_200_DIVIDER;
+		at93c = &at93c_defs[1];
 	} else {
 		printk(KERN_INFO "LASAT 100 board\n");
-		mips_machtype = MACH_LASAT_100;
 		lasat_ndelay_divider = LASAT_100_DIVIDER;
+		at93c = &at93c_defs[0];
 	}
 
-	at93c = &at93c_defs[mips_machtype];
-
 	lasat_init_board_info();		/* Read info from EEPROM */
 
 	/* Get the command line */
diff --git a/arch/mips/lasat/serial.c b/arch/mips/lasat/serial.c
index 205bd397d75b..5bcb6e89ab78 100644
--- a/arch/mips/lasat/serial.c
+++ b/arch/mips/lasat/serial.c
@@ -23,7 +23,6 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 
-#include <asm/bootinfo.h>
 #include <asm/lasat/lasat.h>
 #include <asm/lasat/serial.h>
 
@@ -47,7 +46,7 @@ static __init int lasat_uart_add(void)
 	if (!pdev)
 		return -ENOMEM;
 
-	if (mips_machtype == MACH_LASAT_100) {
+	if (!IS_LASAT_200()) {
 		lasat_serial_res[0].start = KSEG1ADDR(LASAT_UART_REGS_BASE_100);
 		lasat_serial_res[0].end = lasat_serial_res[0].start + LASAT_UART_REGS_SHIFT_100 * 8 - 1;
 		lasat_serial_res[0].flags = IORESOURCE_MEM;
diff --git a/arch/mips/lasat/setup.c b/arch/mips/lasat/setup.c
index e072da4ff3b3..dbd3163a85c2 100644
--- a/arch/mips/lasat/setup.c
+++ b/arch/mips/lasat/setup.c
@@ -127,9 +127,11 @@ void __init plat_time_init(void)
 void __init plat_mem_setup(void)
 {
 	int i;
-	lasat_misc  = &lasat_misc_info[mips_machtype];
+	int lasat_type = IS_LASAT_200() ? 1 : 0;
+
+	lasat_misc  = &lasat_misc_info[lasat_type];
 #ifdef CONFIG_PICVUE
-	picvue = &pvc_defs[mips_machtype];
+	picvue = &pvc_defs[lasat_type];
 #endif
 
 	/* Set up panic notifier */
@@ -140,7 +142,7 @@ void __init plat_mem_setup(void)
 	lasat_reboot_setup();
 
 #ifdef CONFIG_DS1603
-	ds1603 = &ds_defs[mips_machtype];
+	ds1603 = &ds_defs[lasat_type];
 #endif
 
 #ifdef DYNAMIC_SERIAL_INIT
diff --git a/arch/mips/math-emu/kernel_linkage.c b/arch/mips/math-emu/kernel_linkage.c
index ed49ef01ac53..52e6c58c8de1 100644
--- a/arch/mips/math-emu/kernel_linkage.c
+++ b/arch/mips/math-emu/kernel_linkage.c
@@ -24,6 +24,7 @@
 #include <asm/signal.h>
 #include <asm/uaccess.h>
 
+#include <asm/fpu.h>
 #include <asm/fpu_emulator.h>
 
 #define SIGNALLING_NAN 0x7ff800007ff80000LL
diff --git a/arch/mips/mips-boards/atlas/Makefile b/arch/mips/mips-boards/atlas/Makefile
deleted file mode 100644
index f71c2dd1041a..000000000000
--- a/arch/mips/mips-boards/atlas/Makefile
+++ /dev/null
@@ -1,22 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-
-obj-y			:= atlas_int.o atlas_setup.o
-obj-$(CONFIG_KGDB)	+= atlas_gdb.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mips-boards/atlas/atlas_gdb.c b/arch/mips/mips-boards/atlas/atlas_gdb.c
deleted file mode 100644
index 00c98cff62dc..000000000000
--- a/arch/mips/mips-boards/atlas/atlas_gdb.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * This is the interface to the remote debugger stub.
- */
-#include <asm/io.h>
-#include <asm/mips-boards/atlas.h>
-#include <asm/mips-boards/saa9730_uart.h>
-
-#define INB(a)     inb((unsigned long)a)
-#define OUTB(x, a)  outb(x, (unsigned long)a)
-
-/*
- * This is the interface to the remote debugger stub
- * if the Philips part is used for the debug port,
- * called from the platform setup code.
- */
-void *saa9730_base = (void *)ATLAS_SAA9730_REG;
-
-static int saa9730_kgdb_active = 0;
-
-#define SAA9730_BAUDCLOCK(baud) (((ATLAS_SAA9730_BAUDCLOCK/(baud))/16)-1)
-
-int saa9730_kgdb_hook(int speed)
-{
-	int baudclock;
-	t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR);
-
-        /*
-         * Clear all interrupts
-         */
-	(void) INB(&kgdb_uart->Lsr);
-	(void) INB(&kgdb_uart->Msr);
-	(void) INB(&kgdb_uart->Thr_Rbr);
-	(void) INB(&kgdb_uart->Iir_Fcr);
-
-        /*
-         * Now, initialize the UART
-         */
-	/* 8 data bits, one stop bit, no parity */
-	OUTB(SAA9730_LCR_DATA8, &kgdb_uart->Lcr);
-
-	baudclock = SAA9730_BAUDCLOCK(speed);
-
-	OUTB((baudclock >> 16) & 0xff, &kgdb_uart->BaudDivMsb);
-	OUTB( baudclock        & 0xff, &kgdb_uart->BaudDivLsb);
-
-	/* Set RTS/DTR active */
-	OUTB(SAA9730_MCR_DTR | SAA9730_MCR_RTS, &kgdb_uart->Mcr);
-	saa9730_kgdb_active = 1;
-
-	return speed;
-}
-
-int saa9730_putDebugChar(char c)
-{
-	t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR);
-
-        if (!saa9730_kgdb_active) {     /* need to init device first */
-                return 0;
-        }
-
-        while (!(INB(&kgdb_uart->Lsr) & SAA9730_LSR_THRE))
-                ;
-	OUTB(c, &kgdb_uart->Thr_Rbr);
-
-        return 1;
-}
-
-char saa9730_getDebugChar(void)
-{
-	t_uart_saa9730_regmap *kgdb_uart = (t_uart_saa9730_regmap *)(saa9730_base + SAA9730_UART_REGS_ADDR);
-	char c;
-
-        if (!saa9730_kgdb_active) {     /* need to init device first */
-                return 0;
-        }
-        while (!(INB(&kgdb_uart->Lsr) & SAA9730_LSR_DR))
-                ;
-
-	c = INB(&kgdb_uart->Thr_Rbr);
-	return(c);
-}
diff --git a/arch/mips/mips-boards/atlas/atlas_int.c b/arch/mips/mips-boards/atlas/atlas_int.c
deleted file mode 100644
index 6fb29c3ff62d..000000000000
--- a/arch/mips/mips-boards/atlas/atlas_int.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Copyright (C) 1999, 2000, 2006  MIPS Technologies, Inc.
- *	All rights reserved.
- *	Authors: Carsten Langgaard <carstenl@mips.com>
- *		 Maciej W. Rozycki <macro@mips.com>
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Routines for generic manipulation of the interrupts found on the MIPS
- * Atlas board.
- *
- */
-#include <linux/compiler.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/kernel.h>
-
-#include <asm/gdb-stub.h>
-#include <asm/io.h>
-#include <asm/irq_cpu.h>
-#include <asm/msc01_ic.h>
-
-#include <asm/mips-boards/atlas.h>
-#include <asm/mips-boards/atlasint.h>
-#include <asm/mips-boards/generic.h>
-
-static struct atlas_ictrl_regs *atlas_hw0_icregs;
-
-#if 0
-#define DEBUG_INT(x...) printk(x)
-#else
-#define DEBUG_INT(x...)
-#endif
-
-void disable_atlas_irq(unsigned int irq_nr)
-{
-	atlas_hw0_icregs->intrsten = 1 << (irq_nr - ATLAS_INT_BASE);
-	iob();
-}
-
-void enable_atlas_irq(unsigned int irq_nr)
-{
-	atlas_hw0_icregs->intseten = 1 << (irq_nr - ATLAS_INT_BASE);
-	iob();
-}
-
-static void end_atlas_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_atlas_irq(irq);
-}
-
-static struct irq_chip atlas_irq_type = {
-	.name = "Atlas",
-	.ack = disable_atlas_irq,
-	.mask = disable_atlas_irq,
-	.mask_ack = disable_atlas_irq,
-	.unmask = enable_atlas_irq,
-	.eoi = enable_atlas_irq,
-	.end = end_atlas_irq,
-};
-
-static inline int ls1bit32(unsigned int x)
-{
-	int b = 31, s;
-
-	s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s;
-	s =  8; if (x <<  8 == 0) s = 0; b -= s; x <<= s;
-	s =  4; if (x <<  4 == 0) s = 0; b -= s; x <<= s;
-	s =  2; if (x <<  2 == 0) s = 0; b -= s; x <<= s;
-	s =  1; if (x <<  1 == 0) s = 0; b -= s;
-
-	return b;
-}
-
-static inline void atlas_hw0_irqdispatch(void)
-{
-	unsigned long int_status;
-	int irq;
-
-	int_status = atlas_hw0_icregs->intstatus;
-
-	/* if int_status == 0, then the interrupt has already been cleared */
-	if (unlikely(int_status == 0))
-		return;
-
-	irq = ATLAS_INT_BASE + ls1bit32(int_status);
-
-	DEBUG_INT("atlas_hw0_irqdispatch: irq=%d\n", irq);
-
-	do_IRQ(irq);
-}
-
-static inline int clz(unsigned long x)
-{
-	__asm__(
-	"	.set	push					\n"
-	"	.set	mips32					\n"
-	"	clz	%0, %1					\n"
-	"	.set	pop					\n"
-	: "=r" (x)
-	: "r" (x));
-
-	return x;
-}
-
-/*
- * Version of ffs that only looks at bits 12..15.
- */
-static inline unsigned int irq_ffs(unsigned int pending)
-{
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-	return -clz(pending) + 31 - CAUSEB_IP;
-#else
-	unsigned int a0 = 7;
-	unsigned int t0;
-
-	t0 = s0 & 0xf000;
-	t0 = t0 < 1;
-	t0 = t0 << 2;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0xc000;
-	t0 = t0 < 1;
-	t0 = t0 << 1;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0x8000;
-	t0 = t0 < 1;
-	//t0 = t0 << 2;
-	a0 = a0 - t0;
-	//s0 = s0 << t0;
-
-	return a0;
-#endif
-}
-
-/*
- * IRQs on the Atlas board look basically like (all external interrupt
- * sources are combined together on hardware interrupt 0 (MIPS IRQ 2)):
- *
- *      MIPS IRQ        Source
- *      --------        ------
- *             0        Software 0 (reschedule IPI on MT)
- *             1        Software 1 (remote call IPI on MT)
- *             2        Combined Atlas hardware interrupt (hw0)
- *             3        Hardware (ignored)
- *             4        Hardware (ignored)
- *             5        Hardware (ignored)
- *             6        Hardware (ignored)
- *             7        R4k timer (what we use)
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ----     R4k Timer
- * Lowest  ----     Software 0
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-	int irq;
-
-	irq = irq_ffs(pending);
-
-	if (irq == MIPSCPU_INT_ATLAS)
-		atlas_hw0_irqdispatch();
-	else if (irq >= 0)
-		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-	else
-		spurious_interrupt();
-}
-
-static inline void init_atlas_irqs(int base)
-{
-	int i;
-
-	atlas_hw0_icregs = (struct atlas_ictrl_regs *)
-			   ioremap(ATLAS_ICTRL_REGS_BASE,
-				   sizeof(struct atlas_ictrl_regs *));
-
-	/*
-	 * Mask out all interrupt by writing "1" to all bit position in
-	 * the interrupt reset reg.
-	 */
-	atlas_hw0_icregs->intrsten = 0xffffffff;
-
-	for (i = ATLAS_INT_BASE; i <= ATLAS_INT_END; i++)
-		set_irq_chip_and_handler(i, &atlas_irq_type, handle_level_irq);
-}
-
-static struct irqaction atlasirq = {
-	.handler = no_action,
-	.name = "Atlas cascade"
-};
-
-msc_irqmap_t __initdata msc_irqmap[] = {
-	{MSC01C_INT_TMR,		MSC01_IRQ_EDGE, 0},
-	{MSC01C_INT_PCI,		MSC01_IRQ_LEVEL, 0},
-};
-int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap);
-
-msc_irqmap_t __initdata msc_eicirqmap[] = {
-	{MSC01E_INT_SW0,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_SW1,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_ATLAS,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_TMR,		MSC01_IRQ_EDGE, 0},
-	{MSC01E_INT_PCI,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_PERFCTR,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_CPUCTR,		MSC01_IRQ_LEVEL, 0}
-};
-int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
-
-void __init arch_init_irq(void)
-{
-	init_atlas_irqs(ATLAS_INT_BASE);
-
-	if (!cpu_has_veic)
-		mips_cpu_irq_init();
-
-	switch(mips_revision_corid) {
-	case MIPS_REVISION_CORID_CORE_MSC:
-	case MIPS_REVISION_CORID_CORE_FPGA2:
-	case MIPS_REVISION_CORID_CORE_FPGA3:
-	case MIPS_REVISION_CORID_CORE_FPGA4:
-	case MIPS_REVISION_CORID_CORE_24K:
-	case MIPS_REVISION_CORID_CORE_EMUL_MSC:
-		if (cpu_has_veic)
-			init_msc_irqs(MSC01E_INT_BASE, MSC01E_INT_BASE,
-				      msc_eicirqmap, msc_nr_eicirqs);
-		else
-			init_msc_irqs(MSC01E_INT_BASE, MSC01C_INT_BASE,
-				      msc_irqmap, msc_nr_irqs);
-	}
-
-	if (cpu_has_veic) {
-		set_vi_handler(MSC01E_INT_ATLAS, atlas_hw0_irqdispatch);
-		setup_irq(MSC01E_INT_BASE + MSC01E_INT_ATLAS, &atlasirq);
-	} else if (cpu_has_vint) {
-		set_vi_handler(MIPSCPU_INT_ATLAS, atlas_hw0_irqdispatch);
-#ifdef CONFIG_MIPS_MT_SMTC
-		setup_irq_smtc(MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS,
-			       &atlasirq, (0x100 << MIPSCPU_INT_ATLAS));
-#else /* Not SMTC */
-		setup_irq(MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
-#endif /* CONFIG_MIPS_MT_SMTC */
-	} else
-		setup_irq(MIPS_CPU_IRQ_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
-}
diff --git a/arch/mips/mips-boards/atlas/atlas_setup.c b/arch/mips/mips-boards/atlas/atlas_setup.c
deleted file mode 100644
index 5c500802271e..000000000000
--- a/arch/mips/mips-boards/atlas/atlas_setup.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/mips-boards/prom.h>
-#include <asm/mips-boards/atlas.h>
-#include <asm/mips-boards/atlasint.h>
-#include <asm/time.h>
-#include <asm/traps.h>
-
-static void __init serial_init(void);
-
-const char *get_system_type(void)
-{
-	return "MIPS Atlas";
-}
-
-const char display_string[] = "        LINUX ON ATLAS       ";
-
-void __init plat_mem_setup(void)
-{
-	mips_pcibios_init();
-
-	ioport_resource.end = 0x7fffffff;
-
-	serial_init();
-
-#ifdef CONFIG_KGDB
-	kgdb_config();
-#endif
-	mips_reboot_setup();
-}
-
-static void __init serial_init(void)
-{
-#ifdef CONFIG_SERIAL_8250
-	struct uart_port s;
-
-	memset(&s, 0, sizeof(s));
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-	s.iobase = ATLAS_UART_REGS_BASE;
-#else
-	s.iobase = ATLAS_UART_REGS_BASE+3;
-#endif
-	s.irq = ATLAS_INT_UART;
-	s.uartclk = ATLAS_BASE_BAUD * 16;
-	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
-	s.iotype = UPIO_PORT;
-	s.regshift = 3;
-
-	if (early_serial_setup(&s) != 0) {
-		printk(KERN_ERR "Serial setup failed!\n");
-	}
-#endif
-}
diff --git a/arch/mips/mips-boards/generic/Makefile b/arch/mips/mips-boards/generic/Makefile
deleted file mode 100644
index f7f87fc09d1e..000000000000
--- a/arch/mips/mips-boards/generic/Makefile
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-# Makefile for the MIPS boards generic routines under Linux.
-#
-
-obj-y				:= reset.o display.o init.o memory.o \
-				   cmdline.o time.o
-obj-y				+= amon.o
-
-obj-$(CONFIG_EARLY_PRINTK)	+= console.o
-obj-$(CONFIG_PCI)		+= pci.o
-obj-$(CONFIG_KGDB)		+= gdb_hook.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mips-boards/generic/console.c b/arch/mips/mips-boards/generic/console.c
deleted file mode 100644
index 4d8ab99e4155..000000000000
--- a/arch/mips/mips-boards/generic/console.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Putting things on the screen/serial line using YAMONs facilities.
- */
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/serial_reg.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_MIPS_ATLAS
-#include <asm/mips-boards/atlas.h>
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define PORT(offset) (ATLAS_UART_REGS_BASE     + ((offset)<<3))
-#else
-#define PORT(offset) (ATLAS_UART_REGS_BASE + 3 + ((offset)<<3))
-#endif
-
-#elif defined(CONFIG_MIPS_SEAD)
-
-#include <asm/mips-boards/sead.h>
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-#define PORT(offset) (SEAD_UART0_REGS_BASE     + ((offset)<<3))
-#else
-#define PORT(offset) (SEAD_UART0_REGS_BASE + 3 + ((offset)<<3))
-#endif
-
-#else
-
-#define PORT(offset) (0x3f8 + (offset))
-
-#endif
-
-static inline unsigned int serial_in(int offset)
-{
-	return inb(PORT(offset));
-}
-
-static inline void serial_out(int offset, int value)
-{
-	outb(value, PORT(offset));
-}
-
-int prom_putchar(char c)
-{
-	while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0)
-		;
-
-	serial_out(UART_TX, c);
-
-	return 1;
-}
diff --git a/arch/mips/mips-boards/generic/display.c b/arch/mips/mips-boards/generic/display.c
deleted file mode 100644
index 2a0057cfc30d..000000000000
--- a/arch/mips/mips-boards/generic/display.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Display routines for display messages in MIPS boards ascii display.
- */
-
-#include <linux/compiler.h>
-#include <linux/timer.h>
-#include <asm/io.h>
-#include <asm/mips-boards/generic.h>
-
-extern const char display_string[];
-static unsigned int display_count;
-static unsigned int max_display_count;
-
-void mips_display_message(const char *str)
-{
-	static unsigned int __iomem *display = NULL;
-	int i;
-
-	if (unlikely(display == NULL))
-		display = ioremap(ASCII_DISPLAY_POS_BASE, 16*sizeof(int));
-
-	for (i = 0; i <= 14; i=i+2) {
-	         if (*str)
-		         __raw_writel(*str++, display + i);
-		 else
-		         __raw_writel(' ', display + i);
-	}
-}
-
-static void scroll_display_message(unsigned long data);
-static DEFINE_TIMER(mips_scroll_timer, scroll_display_message, HZ, 0);
-
-static void scroll_display_message(unsigned long data)
-{
-	mips_display_message(&display_string[display_count++]);
-	if (display_count == max_display_count)
-		display_count = 0;
-
-	mod_timer(&mips_scroll_timer, jiffies + HZ);
-}
-
-void mips_scroll_message(void)
-{
-	del_timer_sync(&mips_scroll_timer);
-	max_display_count = strlen(display_string) + 1 - 8;
-	mod_timer(&mips_scroll_timer, jiffies + 1);
-}
diff --git a/arch/mips/mips-boards/generic/gdb_hook.c b/arch/mips/mips-boards/generic/gdb_hook.c
deleted file mode 100644
index 6a1854de4579..000000000000
--- a/arch/mips/mips-boards/generic/gdb_hook.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * This is the interface to the remote debugger stub.
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-static struct serial_state rs_table[] = {
-	SERIAL_PORT_DFNS	/* Defined in serial.h */
-};
-
-static struct async_struct kdb_port_info = {0};
-
-int (*generic_putDebugChar)(char);
-char (*generic_getDebugChar)(void);
-
-static __inline__ unsigned int serial_in(struct async_struct *info, int offset)
-{
-	return inb(info->port + offset);
-}
-
-static __inline__ void serial_out(struct async_struct *info, int offset,
-				int value)
-{
-	outb(value, info->port+offset);
-}
-
-int rs_kgdb_hook(int tty_no, int speed) {
-	int t;
-	struct serial_state *ser = &rs_table[tty_no];
-
-	kdb_port_info.state = ser;
-	kdb_port_info.magic = SERIAL_MAGIC;
-	kdb_port_info.port = ser->port;
-	kdb_port_info.flags = ser->flags;
-
-	/*
-	 * Clear all interrupts
-	 */
-	serial_in(&kdb_port_info, UART_LSR);
-	serial_in(&kdb_port_info, UART_RX);
-	serial_in(&kdb_port_info, UART_IIR);
-	serial_in(&kdb_port_info, UART_MSR);
-
-	/*
-	 * Now, initialize the UART
-	 */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);	/* reset DLAB */
-	if (kdb_port_info.flags & ASYNC_FOURPORT) {
-		kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS;
-		t = UART_MCR_DTR | UART_MCR_OUT1;
-	} else {
-		kdb_port_info.MCR
-			= UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
-		t = UART_MCR_DTR | UART_MCR_RTS;
-	}
-
-	kdb_port_info.MCR = t;		/* no interrupts, please */
-	serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR);
-
-	/*
-	 * and set the speed of the serial port
-	 */
-	if (speed == 0)
-		speed = 9600;
-
-	t = kdb_port_info.state->baud_base / speed;
-	/* set DLAB */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB);
-	serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */
-	serial_out(&kdb_port_info, UART_DLM, t >> 8);  /* MS of divisor */
-	/* reset DLAB */
-	serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);
-
-	return speed;
-}
-
-int putDebugChar(char c)
-{
-	return generic_putDebugChar(c);
-}
-
-char getDebugChar(void)
-{
-	return generic_getDebugChar();
-}
-
-int rs_putDebugChar(char c)
-{
-
-	if (!kdb_port_info.state) { 	/* need to init device first */
-		return 0;
-	}
-
-	while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0)
-		;
-
-	serial_out(&kdb_port_info, UART_TX, c);
-
-	return 1;
-}
-
-char rs_getDebugChar(void)
-{
-	if (!kdb_port_info.state) { 	/* need to init device first */
-		return 0;
-	}
-
-	while (!(serial_in(&kdb_port_info, UART_LSR) & 1))
-		;
-
-	return serial_in(&kdb_port_info, UART_RX);
-}
diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c
deleted file mode 100644
index 83b9dc739203..000000000000
--- a/arch/mips/mips-boards/generic/init.c
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- * Copyright (C) 1999, 2000, 2004, 2005  MIPS Technologies, Inc.
- *	All rights reserved.
- *	Authors: Carsten Langgaard <carstenl@mips.com>
- *		 Maciej W. Rozycki <macro@mips.com>
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * PROM library initialisation code.
- */
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gt64120.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/cacheflush.h>
-#include <asm/traps.h>
-
-#include <asm/mips-boards/prom.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/mips-boards/bonito64.h>
-#include <asm/mips-boards/msc01_pci.h>
-
-#include <asm/mips-boards/malta.h>
-
-#ifdef CONFIG_KGDB
-extern int rs_kgdb_hook(int, int);
-extern int rs_putDebugChar(char);
-extern char rs_getDebugChar(void);
-extern int saa9730_kgdb_hook(int);
-extern int saa9730_putDebugChar(char);
-extern char saa9730_getDebugChar(void);
-#endif
-
-int prom_argc;
-int *_prom_argv, *_prom_envp;
-
-/*
- * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
- * This macro take care of sign extension, if running in 64-bit mode.
- */
-#define prom_envp(index) ((char *)(long)_prom_envp[(index)])
-
-int init_debug = 0;
-
-int mips_revision_corid;
-int mips_revision_sconid;
-
-/* Bonito64 system controller register base. */
-unsigned long _pcictrl_bonito;
-unsigned long _pcictrl_bonito_pcicfg;
-
-/* GT64120 system controller register base */
-unsigned long _pcictrl_gt64120;
-
-/* MIPS System controller register base */
-unsigned long _pcictrl_msc;
-
-char *prom_getenv(char *envname)
-{
-	/*
-	 * Return a pointer to the given environment variable.
-	 * In 64-bit mode: we're using 64-bit pointers, but all pointers
-	 * in the PROM structures are only 32-bit, so we need some
-	 * workarounds, if we are running in 64-bit mode.
-	 */
-	int i, index=0;
-
-	i = strlen(envname);
-
-	while (prom_envp(index)) {
-		if(strncmp(envname, prom_envp(index), i) == 0) {
-			return(prom_envp(index+1));
-		}
-		index += 2;
-	}
-
-	return NULL;
-}
-
-static inline unsigned char str2hexnum(unsigned char c)
-{
-	if (c >= '0' && c <= '9')
-		return c - '0';
-	if (c >= 'a' && c <= 'f')
-		return c - 'a' + 10;
-	return 0; /* foo */
-}
-
-static inline void str2eaddr(unsigned char *ea, unsigned char *str)
-{
-	int i;
-
-	for (i = 0; i < 6; i++) {
-		unsigned char num;
-
-		if((*str == '.') || (*str == ':'))
-			str++;
-		num = str2hexnum(*str++) << 4;
-		num |= (str2hexnum(*str++));
-		ea[i] = num;
-	}
-}
-
-int get_ethernet_addr(char *ethernet_addr)
-{
-        char *ethaddr_str;
-
-        ethaddr_str = prom_getenv("ethaddr");
-	if (!ethaddr_str) {
-	        printk("ethaddr not set in boot prom\n");
-		return -1;
-	}
-	str2eaddr(ethernet_addr, ethaddr_str);
-
-	if (init_debug > 1) {
-	        int i;
-		printk("get_ethernet_addr: ");
-	        for (i=0; i<5; i++)
-		        printk("%02x:", (unsigned char)*(ethernet_addr+i));
-		printk("%02x\n", *(ethernet_addr+i));
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-static void __init console_config(void)
-{
-	char console_string[40];
-	int baud = 0;
-	char parity = '\0', bits = '\0', flow = '\0';
-	char *s;
-
-	if ((strstr(prom_getcmdline(), "console=")) == NULL) {
-		s = prom_getenv("modetty0");
-		if (s) {
-			while (*s >= '0' && *s <= '9')
-				baud = baud*10 + *s++ - '0';
-			if (*s == ',') s++;
-			if (*s) parity = *s++;
-			if (*s == ',') s++;
-			if (*s) bits = *s++;
-			if (*s == ',') s++;
-			if (*s == 'h') flow = 'r';
-		}
-		if (baud == 0)
-			baud = 38400;
-		if (parity != 'n' && parity != 'o' && parity != 'e')
-			parity = 'n';
-		if (bits != '7' && bits != '8')
-			bits = '8';
-		if (flow == '\0')
-			flow = 'r';
-		sprintf(console_string, " console=ttyS0,%d%c%c%c", baud, parity, bits, flow);
-		strcat(prom_getcmdline(), console_string);
-		pr_info("Config serial console:%s\n", console_string);
-	}
-}
-#endif
-
-#ifdef CONFIG_KGDB
-void __init kgdb_config(void)
-{
-	extern int (*generic_putDebugChar)(char);
-	extern char (*generic_getDebugChar)(void);
-	char *argptr;
-	int line, speed;
-
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-		argptr += strlen("kgdb=ttyS");
-		if (*argptr != '0' && *argptr != '1')
-			printk("KGDB: Unknown serial line /dev/ttyS%c, "
-			       "falling back to /dev/ttyS1\n", *argptr);
-		line = *argptr == '0' ? 0 : 1;
-		printk("KGDB: Using serial line /dev/ttyS%d for session\n", line);
-
-		speed = 0;
-		if (*++argptr == ',')
-		{
-			int c;
-			while ((c = *++argptr) && ('0' <= c && c <= '9'))
-				speed = speed * 10 + c - '0';
-		}
-#ifdef CONFIG_MIPS_ATLAS
-		if (line == 1) {
-			speed = saa9730_kgdb_hook(speed);
-			generic_putDebugChar = saa9730_putDebugChar;
-			generic_getDebugChar = saa9730_getDebugChar;
-		}
-		else
-#endif
-		{
-			speed = rs_kgdb_hook(line, speed);
-			generic_putDebugChar = rs_putDebugChar;
-			generic_getDebugChar = rs_getDebugChar;
-		}
-
-		pr_info("KGDB: Using serial line /dev/ttyS%d at %d for "
-		        "session, please connect your debugger\n",
-		        line ? 1 : 0, speed);
-
-		{
-			char *s;
-			for (s = "Please connect GDB to this port\r\n"; *s; )
-				generic_putDebugChar(*s++);
-		}
-
-		/* Breakpoint is invoked after interrupts are initialised */
-	}
-}
-#endif
-
-static void __init mips_nmi_setup(void)
-{
-	void *base;
-	extern char except_vec_nmi;
-
-	base = cpu_has_veic ?
-		(void *)(CAC_BASE + 0xa80) :
-		(void *)(CAC_BASE + 0x380);
-	memcpy(base, &except_vec_nmi, 0x80);
-	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
-}
-
-static void __init mips_ejtag_setup(void)
-{
-	void *base;
-	extern char except_vec_ejtag_debug;
-
-	base = cpu_has_veic ?
-		(void *)(CAC_BASE + 0xa00) :
-		(void *)(CAC_BASE + 0x300);
-	memcpy(base, &except_vec_ejtag_debug, 0x80);
-	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
-}
-
-extern struct plat_smp_ops msmtc_smp_ops;
-
-void __init prom_init(void)
-{
-	prom_argc = fw_arg0;
-	_prom_argv = (int *) fw_arg1;
-	_prom_envp = (int *) fw_arg2;
-
-	mips_display_message("LINUX");
-
-#ifdef CONFIG_MIPS_SEAD
-	set_io_port_base(KSEG1);
-#else
-	/*
-	 * early setup of _pcictrl_bonito so that we can determine
-	 * the system controller on a CORE_EMUL board
-	 */
-	_pcictrl_bonito = (unsigned long)ioremap(BONITO_REG_BASE, BONITO_REG_SIZE);
-
-	mips_revision_corid = MIPS_REVISION_CORID;
-
-	if (mips_revision_corid == MIPS_REVISION_CORID_CORE_EMUL) {
-		if (BONITO_PCIDID == 0x0001df53 ||
-		    BONITO_PCIDID == 0x0003df53)
-			mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_BON;
-		else
-			mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_MSC;
-	}
-
-	mips_revision_sconid = MIPS_REVISION_SCONID;
-	if (mips_revision_sconid == MIPS_REVISION_SCON_OTHER) {
-		switch (mips_revision_corid) {
-		case MIPS_REVISION_CORID_QED_RM5261:
-		case MIPS_REVISION_CORID_CORE_LV:
-		case MIPS_REVISION_CORID_CORE_FPGA:
-		case MIPS_REVISION_CORID_CORE_FPGAR2:
-			mips_revision_sconid = MIPS_REVISION_SCON_GT64120;
-			break;
-		case MIPS_REVISION_CORID_CORE_EMUL_BON:
-		case MIPS_REVISION_CORID_BONITO64:
-		case MIPS_REVISION_CORID_CORE_20K:
-			mips_revision_sconid = MIPS_REVISION_SCON_BONITO;
-			break;
-		case MIPS_REVISION_CORID_CORE_MSC:
-		case MIPS_REVISION_CORID_CORE_FPGA2:
-		case MIPS_REVISION_CORID_CORE_24K:
-			/*
-			 * SOCit/ROCit support is essentially identical
-			 * but make an attempt to distinguish them
-			 */
-			mips_revision_sconid = MIPS_REVISION_SCON_SOCIT;
-			break;
-		case MIPS_REVISION_CORID_CORE_FPGA3:
-		case MIPS_REVISION_CORID_CORE_FPGA4:
-		case MIPS_REVISION_CORID_CORE_FPGA5:
-		case MIPS_REVISION_CORID_CORE_EMUL_MSC:
-		default:
-			/* See above */
-			mips_revision_sconid = MIPS_REVISION_SCON_ROCIT;
-			break;
-		}
-	}
-
-	switch (mips_revision_sconid) {
-		u32 start, map, mask, data;
-
-	case MIPS_REVISION_SCON_GT64120:
-		/*
-		 * Setup the North bridge to do Master byte-lane swapping
-		 * when running in bigendian.
-		 */
-		_pcictrl_gt64120 = (unsigned long)ioremap(MIPS_GT_BASE, 0x2000);
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-		GT_WRITE(GT_PCI0_CMD_OFS, GT_PCI0_CMD_MBYTESWAP_BIT |
-			 GT_PCI0_CMD_SBYTESWAP_BIT);
-#else
-		GT_WRITE(GT_PCI0_CMD_OFS, 0);
-#endif
-		/* Fix up PCI I/O mapping if necessary (for Atlas).  */
-		start = GT_READ(GT_PCI0IOLD_OFS);
-		map = GT_READ(GT_PCI0IOREMAP_OFS);
-		if ((start & map) != 0) {
-			map &= ~start;
-			GT_WRITE(GT_PCI0IOREMAP_OFS, map);
-		}
-
-		set_io_port_base(MALTA_GT_PORT_BASE);
-		break;
-
-	case MIPS_REVISION_SCON_BONITO:
-		_pcictrl_bonito_pcicfg = (unsigned long)ioremap(BONITO_PCICFG_BASE, BONITO_PCICFG_SIZE);
-
-		/*
-		 * Disable Bonito IOBC.
-		 */
-		BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG &
-			~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
-			  BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
-
-		/*
-		 * Setup the North bridge to do Master byte-lane swapping
-		 * when running in bigendian.
-		 */
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-		BONITO_BONGENCFG = BONITO_BONGENCFG &
-			~(BONITO_BONGENCFG_MSTRBYTESWAP |
-			  BONITO_BONGENCFG_BYTESWAP);
-#else
-		BONITO_BONGENCFG = BONITO_BONGENCFG |
-			BONITO_BONGENCFG_MSTRBYTESWAP |
-			BONITO_BONGENCFG_BYTESWAP;
-#endif
-
-		set_io_port_base(MALTA_BONITO_PORT_BASE);
-		break;
-
-	case MIPS_REVISION_SCON_SOCIT:
-	case MIPS_REVISION_SCON_ROCIT:
-		_pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000);
-	mips_pci_controller:
-		mb();
-		MSC_READ(MSC01_PCI_CFG, data);
-		MSC_WRITE(MSC01_PCI_CFG, data & ~MSC01_PCI_CFG_EN_BIT);
-		wmb();
-
-		/* Fix up lane swapping.  */
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-		MSC_WRITE(MSC01_PCI_SWAP, MSC01_PCI_SWAP_NOSWAP);
-#else
-		MSC_WRITE(MSC01_PCI_SWAP,
-			  MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_IO_SHF |
-			  MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF |
-			  MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF);
-#endif
-		/* Fix up target memory mapping.  */
-		MSC_READ(MSC01_PCI_BAR0, mask);
-		MSC_WRITE(MSC01_PCI_P2SCMSKL, mask & MSC01_PCI_BAR0_SIZE_MSK);
-
-		/* Don't handle target retries indefinitely.  */
-		if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) ==
-		    MSC01_PCI_CFG_MAXRTRY_MSK)
-			data = (data & ~(MSC01_PCI_CFG_MAXRTRY_MSK <<
-					 MSC01_PCI_CFG_MAXRTRY_SHF)) |
-			       ((MSC01_PCI_CFG_MAXRTRY_MSK - 1) <<
-				MSC01_PCI_CFG_MAXRTRY_SHF);
-
-		wmb();
-		MSC_WRITE(MSC01_PCI_CFG, data);
-		mb();
-
-		set_io_port_base(MALTA_MSC_PORT_BASE);
-		break;
-
-	case MIPS_REVISION_SCON_SOCITSC:
-	case MIPS_REVISION_SCON_SOCITSCP:
-		_pcictrl_msc = (unsigned long)ioremap(MIPS_SOCITSC_PCI_REG_BASE, 0x2000);
-		goto mips_pci_controller;
-
-	default:
-		/* Unknown system controller */
-		mips_display_message("SC Error");
-		while (1);   /* We die here... */
-	}
-#endif
-	board_nmi_handler_setup = mips_nmi_setup;
-	board_ejtag_handler_setup = mips_ejtag_setup;
-
-	pr_info("\nLINUX started...\n");
-	prom_init_cmdline();
-	prom_meminit();
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	console_config();
-#endif
-#ifdef CONFIG_MIPS_CMP
-	register_smp_ops(&cmp_smp_ops);
-#endif
-#ifdef CONFIG_MIPS_MT_SMP
-	register_smp_ops(&vsmp_smp_ops);
-#endif
-#ifdef CONFIG_MIPS_MT_SMTC
-	register_smp_ops(&msmtc_smp_ops);
-#endif
-}
diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c
deleted file mode 100644
index 5e443bba5662..000000000000
--- a/arch/mips/mips-boards/generic/memory.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * PROM library functions for acquiring/using memory descriptors given to
- * us from the YAMON.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/pfn.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/sections.h>
-
-#include <asm/mips-boards/prom.h>
-
-/*#define DEBUG*/
-
-enum yamon_memtypes {
-	yamon_dontuse,
-	yamon_prom,
-	yamon_free,
-};
-static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
-
-#ifdef DEBUG
-static char *mtypes[3] = {
-	"Dont use memory",
-	"YAMON PROM memory",
-	"Free memmory",
-};
-#endif
-
-/* determined physical memory size, not overridden by command line args  */
-unsigned long physical_memsize = 0L;
-
-static struct prom_pmemblock * __init prom_getmdesc(void)
-{
-	char *memsize_str;
-	unsigned int memsize;
-	char cmdline[CL_SIZE], *ptr;
-
-	/* otherwise look in the environment */
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str) {
-		printk(KERN_WARNING
-		       "memsize not set in boot prom, set to default (32Mb)\n");
-		physical_memsize = 0x02000000;
-	} else {
-#ifdef DEBUG
-		pr_debug("prom_memsize = %s\n", memsize_str);
-#endif
-		physical_memsize = simple_strtol(memsize_str, NULL, 0);
-	}
-
-#ifdef CONFIG_CPU_BIG_ENDIAN
-	/* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last
-	   word of physical memory */
-	physical_memsize -= PAGE_SIZE;
-#endif
-
-	/* Check the command line for a memsize directive that overrides
-	   the physical/default amount */
-	strcpy(cmdline, arcs_cmdline);
-	ptr = strstr(cmdline, "memsize=");
-	if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
-		ptr = strstr(ptr, " memsize=");
-
-	if (ptr)
-		memsize = memparse(ptr + 8, &ptr);
-	else
-		memsize = physical_memsize;
-
-	memset(mdesc, 0, sizeof(mdesc));
-
-	mdesc[0].type = yamon_dontuse;
-	mdesc[0].base = 0x00000000;
-	mdesc[0].size = 0x00001000;
-
-	mdesc[1].type = yamon_prom;
-	mdesc[1].base = 0x00001000;
-	mdesc[1].size = 0x000ef000;
-
-#ifdef CONFIG_MIPS_MALTA
-	/*
-	 * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the
-	 * south bridge and PCI access always forwarded to the ISA Bus and
-	 * BIOSCS# is always generated.
-	 * This mean that this area can't be used as DMA memory for PCI
-	 * devices.
-	 */
-	mdesc[2].type = yamon_dontuse;
-	mdesc[2].base = 0x000f0000;
-	mdesc[2].size = 0x00010000;
-#else
-	mdesc[2].type = yamon_prom;
-	mdesc[2].base = 0x000f0000;
-	mdesc[2].size = 0x00010000;
-#endif
-
-	mdesc[3].type = yamon_dontuse;
-	mdesc[3].base = 0x00100000;
-	mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) - mdesc[3].base;
-
-	mdesc[4].type = yamon_free;
-	mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end));
-	mdesc[4].size = memsize - mdesc[4].base;
-
-	return &mdesc[0];
-}
-
-static int __init prom_memtype_classify(unsigned int type)
-{
-	switch (type) {
-	case yamon_free:
-		return BOOT_MEM_RAM;
-	case yamon_prom:
-		return BOOT_MEM_ROM_DATA;
-	default:
-		return BOOT_MEM_RESERVED;
-	}
-}
-
-void __init prom_meminit(void)
-{
-	struct prom_pmemblock *p;
-
-#ifdef DEBUG
-	pr_debug("YAMON MEMORY DESCRIPTOR dump:\n");
-	p = prom_getmdesc();
-	while (p->size) {
-		int i = 0;
-		pr_debug("[%d,%p]: base<%08lx> size<%08lx> type<%s>\n",
-			 i, p, p->base, p->size, mtypes[p->type]);
-		p++;
-		i++;
-	}
-#endif
-	p = prom_getmdesc();
-
-	while (p->size) {
-		long type;
-		unsigned long base, size;
-
-		type = prom_memtype_classify(p->type);
-		base = p->base;
-		size = p->size;
-
-		add_memory_region(base, size, type);
-                p++;
-	}
-}
-
-void __init prom_free_prom_memory(void)
-{
-	unsigned long addr;
-	int i;
-
-	for (i = 0; i < boot_mem_map.nr_map; i++) {
-		if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
-			continue;
-
-		addr = boot_mem_map.map[i].addr;
-		free_init_pages("prom memory",
-				addr, addr + boot_mem_map.map[i].size);
-	}
-}
diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c
deleted file mode 100644
index 583d468d98a9..000000000000
--- a/arch/mips/mips-boards/generic/reset.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * Reset the MIPS boards.
- *
- */
-#include <linux/pm.h>
-
-#include <asm/io.h>
-#include <asm/reboot.h>
-#include <asm/mips-boards/generic.h>
-#if defined(CONFIG_MIPS_ATLAS)
-#include <asm/mips-boards/atlas.h>
-#endif
-
-static void mips_machine_restart(char *command);
-static void mips_machine_halt(void);
-#if defined(CONFIG_MIPS_ATLAS)
-static void atlas_machine_power_off(void);
-#endif
-
-static void mips_machine_restart(char *command)
-{
-	unsigned int __iomem *softres_reg =
-		ioremap(SOFTRES_REG, sizeof(unsigned int));
-
-	__raw_writel(GORESET, softres_reg);
-}
-
-static void mips_machine_halt(void)
-{
-	unsigned int __iomem *softres_reg =
-		ioremap(SOFTRES_REG, sizeof(unsigned int));
-
-	__raw_writel(GORESET, softres_reg);
-}
-
-#if defined(CONFIG_MIPS_ATLAS)
-static void atlas_machine_power_off(void)
-{
-	unsigned int __iomem *psustby_reg = ioremap(ATLAS_PSUSTBY_REG, sizeof(unsigned int));
-
-	writew(ATLAS_GOSTBY, psustby_reg);
-}
-#endif
-
-void mips_reboot_setup(void)
-{
-	_machine_restart = mips_machine_restart;
-	_machine_halt = mips_machine_halt;
-#if defined(CONFIG_MIPS_ATLAS)
-	pm_power_off = atlas_machine_power_off;
-#endif
-#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_SEAD)
-	pm_power_off = mips_machine_halt;
-#endif
-}
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
deleted file mode 100644
index fe2cac1b4514..000000000000
--- a/arch/mips/mips-boards/generic/time.c
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Setting up the clock on the MIPS boards.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/mc146818rtc.h>
-
-#include <asm/mipsregs.h>
-#include <asm/mipsmtregs.h>
-#include <asm/hardirq.h>
-#include <asm/i8253.h>
-#include <asm/irq.h>
-#include <asm/div64.h>
-#include <asm/cpu.h>
-#include <asm/time.h>
-#include <asm/mc146818-time.h>
-#include <asm/msc01_ic.h>
-
-#include <asm/mips-boards/generic.h>
-#include <asm/mips-boards/prom.h>
-
-#ifdef CONFIG_MIPS_ATLAS
-#include <asm/mips-boards/atlasint.h>
-#endif
-#ifdef CONFIG_MIPS_MALTA
-#include <asm/mips-boards/maltaint.h>
-#endif
-#ifdef CONFIG_MIPS_SEAD
-#include <asm/mips-boards/seadint.h>
-#endif
-
-unsigned long cpu_khz;
-
-static int mips_cpu_timer_irq;
-static int mips_cpu_perf_irq;
-extern int cp0_perfcount_irq;
-
-static void mips_timer_dispatch(void)
-{
-	do_IRQ(mips_cpu_timer_irq);
-}
-
-static void mips_perf_dispatch(void)
-{
-	do_IRQ(mips_cpu_perf_irq);
-}
-
-/*
- * Estimate CPU frequency.  Sets mips_hpt_frequency as a side-effect
- */
-static unsigned int __init estimate_cpu_frequency(void)
-{
-	unsigned int prid = read_c0_prid() & 0xffff00;
-	unsigned int count;
-
-#if defined(CONFIG_MIPS_SEAD) || defined(CONFIG_MIPS_SIM)
-	/*
-	 * The SEAD board doesn't have a real time clock, so we can't
-	 * really calculate the timer frequency
-	 * For now we hardwire the SEAD board frequency to 12MHz.
-	 */
-
-	if ((prid == (PRID_COMP_MIPS | PRID_IMP_20KC)) ||
-	    (prid == (PRID_COMP_MIPS | PRID_IMP_25KF)))
-		count = 12000000;
-	else
-		count = 6000000;
-#endif
-#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_MALTA)
-	unsigned long flags;
-	unsigned int start;
-
-	local_irq_save(flags);
-
-	/* Start counter exactly on falling edge of update flag */
-	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
-	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
-
-	/* Start r4k counter. */
-	start = read_c0_count();
-
-	/* Read counter exactly on falling edge of update flag */
-	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
-	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
-
-	count = read_c0_count() - start;
-
-	/* restore interrupts */
-	local_irq_restore(flags);
-#endif
-
-	mips_hpt_frequency = count;
-	if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
-	    (prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
-		count *= 2;
-
-	count += 5000;    /* round */
-	count -= count%10000;
-
-	return count;
-}
-
-unsigned long read_persistent_clock(void)
-{
-	return mc146818_get_cmos_time();
-}
-
-static void __init plat_perf_setup(void)
-{
-#ifdef MSC01E_INT_BASE
-	if (cpu_has_veic) {
-		set_vi_handler(MSC01E_INT_PERFCTR, mips_perf_dispatch);
-		mips_cpu_perf_irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR;
-	} else
-#endif
-	if (cp0_perfcount_irq >= 0) {
-		if (cpu_has_vint)
-			set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch);
-		mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
-#ifdef CONFIG_SMP
-		set_irq_handler(mips_cpu_perf_irq, handle_percpu_irq);
-#endif
-	}
-}
-
-unsigned int __cpuinit get_c0_compare_int(void)
-{
-#ifdef MSC01E_INT_BASE
-	if (cpu_has_veic) {
-		set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
-		mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
-	} else
-#endif
-	{
-		if (cpu_has_vint)
-			set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
-		mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
-	}
-
-	return mips_cpu_timer_irq;
-}
-
-void __init plat_time_init(void)
-{
-	unsigned int est_freq;
-
-        /* Set Data mode - binary. */
-        CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
-
-	est_freq = estimate_cpu_frequency();
-
-	printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
-	       (est_freq%1000000)*100/1000000);
-
-        cpu_khz = est_freq / 1000;
-
-	mips_scroll_message();
-#ifdef CONFIG_I8253		/* Only Malta has a PIT */
-	setup_pit_timer();
-#endif
-
-	plat_perf_setup();
-}
diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile
deleted file mode 100644
index db4ad654a6d3..000000000000
--- a/arch/mips/mips-boards/malta/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-# Makefile for the MIPS Malta specific kernel interface routines
-# under Linux.
-#
-
-obj-y := malta_int.o malta_mtd.o malta_platform.o malta_setup.o
-
-# FIXME FIXME FIXME
-obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c
deleted file mode 100644
index 8c495104b321..000000000000
--- a/arch/mips/mips-boards/malta/malta_int.c
+++ /dev/null
@@ -1,709 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
- * Copyright (C) 2001 Ralf Baechle
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Routines for generic manipulation of the interrupts found on the MIPS
- * Malta board.
- * The interrupt controller is located in the South Bridge a PIIX4 device
- * with two internal 82C95 interrupt controllers.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/kernel_stat.h>
-#include <linux/kernel.h>
-#include <linux/random.h>
-
-#include <asm/traps.h>
-#include <asm/i8259.h>
-#include <asm/irq_cpu.h>
-#include <asm/irq_regs.h>
-#include <asm/mips-boards/malta.h>
-#include <asm/mips-boards/maltaint.h>
-#include <asm/mips-boards/piix4.h>
-#include <asm/gt64120.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/mips-boards/msc01_pci.h>
-#include <asm/msc01_ic.h>
-#include <asm/gic.h>
-#include <asm/gcmpregs.h>
-
-int gcmp_present = -1;
-int gic_present;
-static unsigned long _msc01_biu_base;
-static unsigned long _gcmp_base;
-static unsigned int ipi_map[NR_CPUS];
-
-static DEFINE_SPINLOCK(mips_irq_lock);
-
-static inline int mips_pcibios_iack(void)
-{
-	int irq;
-	u32 dummy;
-
-	/*
-	 * Determine highest priority pending interrupt by performing
-	 * a PCI Interrupt Acknowledge cycle.
-	 */
-	switch (mips_revision_sconid) {
-	case MIPS_REVISION_SCON_SOCIT:
-	case MIPS_REVISION_SCON_ROCIT:
-	case MIPS_REVISION_SCON_SOCITSC:
-	case MIPS_REVISION_SCON_SOCITSCP:
-		MSC_READ(MSC01_PCI_IACK, irq);
-		irq &= 0xff;
-		break;
-	case MIPS_REVISION_SCON_GT64120:
-		irq = GT_READ(GT_PCI0_IACK_OFS);
-		irq &= 0xff;
-		break;
-	case MIPS_REVISION_SCON_BONITO:
-		/* The following will generate a PCI IACK cycle on the
-		 * Bonito controller. It's a little bit kludgy, but it
-		 * was the easiest way to implement it in hardware at
-		 * the given time.
-		 */
-		BONITO_PCIMAP_CFG = 0x20000;
-
-		/* Flush Bonito register block */
-		dummy = BONITO_PCIMAP_CFG;
-		iob();    /* sync */
-
-		irq = readl((u32 *)_pcictrl_bonito_pcicfg);
-		iob();    /* sync */
-		irq &= 0xff;
-		BONITO_PCIMAP_CFG = 0;
-		break;
-	default:
-		printk(KERN_WARNING "Unknown system controller.\n");
-		return -1;
-	}
-	return irq;
-}
-
-static inline int get_int(void)
-{
-	unsigned long flags;
-	int irq;
-	spin_lock_irqsave(&mips_irq_lock, flags);
-
-	irq = mips_pcibios_iack();
-
-	/*
-	 * The only way we can decide if an interrupt is spurious
-	 * is by checking the 8259 registers.  This needs a spinlock
-	 * on an SMP system,  so leave it up to the generic code...
-	 */
-
-	spin_unlock_irqrestore(&mips_irq_lock, flags);
-
-	return irq;
-}
-
-static void malta_hw0_irqdispatch(void)
-{
-	int irq;
-
-	irq = get_int();
-	if (irq < 0) {
-		/* interrupt has already been cleared */
-		return;
-	}
-
-	do_IRQ(MALTA_INT_BASE + irq);
-}
-
-static void malta_ipi_irqdispatch(void)
-{
-	int irq;
-
-	irq = gic_get_int();
-	if (irq < 0)
-		return;  /* interrupt has already been cleared */
-
-	do_IRQ(MIPS_GIC_IRQ_BASE + irq);
-}
-
-static void corehi_irqdispatch(void)
-{
-	unsigned int intedge, intsteer, pcicmd, pcibadaddr;
-	unsigned int pcimstat, intisr, inten, intpol;
-	unsigned int intrcause, datalo, datahi;
-	struct pt_regs *regs = get_irq_regs();
-
-	printk(KERN_EMERG "CoreHI interrupt, shouldn't happen, we die here!\n");
-	printk(KERN_EMERG "epc   : %08lx\nStatus: %08lx\n"
-			"Cause : %08lx\nbadVaddr : %08lx\n",
-			regs->cp0_epc, regs->cp0_status,
-			regs->cp0_cause, regs->cp0_badvaddr);
-
-	/* Read all the registers and then print them as there is a
-	   problem with interspersed printk's upsetting the Bonito controller.
-	   Do it for the others too.
-	*/
-
-	switch (mips_revision_sconid) {
-	case MIPS_REVISION_SCON_SOCIT:
-	case MIPS_REVISION_SCON_ROCIT:
-	case MIPS_REVISION_SCON_SOCITSC:
-	case MIPS_REVISION_SCON_SOCITSCP:
-		ll_msc_irq();
-		break;
-	case MIPS_REVISION_SCON_GT64120:
-		intrcause = GT_READ(GT_INTRCAUSE_OFS);
-		datalo = GT_READ(GT_CPUERR_ADDRLO_OFS);
-		datahi = GT_READ(GT_CPUERR_ADDRHI_OFS);
-		printk(KERN_EMERG "GT_INTRCAUSE = %08x\n", intrcause);
-		printk(KERN_EMERG "GT_CPUERR_ADDR = %02x%08x\n",
-				datahi, datalo);
-		break;
-	case MIPS_REVISION_SCON_BONITO:
-		pcibadaddr = BONITO_PCIBADADDR;
-		pcimstat = BONITO_PCIMSTAT;
-		intisr = BONITO_INTISR;
-		inten = BONITO_INTEN;
-		intpol = BONITO_INTPOL;
-		intedge = BONITO_INTEDGE;
-		intsteer = BONITO_INTSTEER;
-		pcicmd = BONITO_PCICMD;
-		printk(KERN_EMERG "BONITO_INTISR = %08x\n", intisr);
-		printk(KERN_EMERG "BONITO_INTEN = %08x\n", inten);
-		printk(KERN_EMERG "BONITO_INTPOL = %08x\n", intpol);
-		printk(KERN_EMERG "BONITO_INTEDGE = %08x\n", intedge);
-		printk(KERN_EMERG "BONITO_INTSTEER = %08x\n", intsteer);
-		printk(KERN_EMERG "BONITO_PCICMD = %08x\n", pcicmd);
-		printk(KERN_EMERG "BONITO_PCIBADADDR = %08x\n", pcibadaddr);
-		printk(KERN_EMERG "BONITO_PCIMSTAT = %08x\n", pcimstat);
-		break;
-	}
-
-	die("CoreHi interrupt", regs);
-}
-
-static inline int clz(unsigned long x)
-{
-	__asm__(
-	"	.set	push					\n"
-	"	.set	mips32					\n"
-	"	clz	%0, %1					\n"
-	"	.set	pop					\n"
-	: "=r" (x)
-	: "r" (x));
-
-	return x;
-}
-
-/*
- * Version of ffs that only looks at bits 12..15.
- */
-static inline unsigned int irq_ffs(unsigned int pending)
-{
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-	return -clz(pending) + 31 - CAUSEB_IP;
-#else
-	unsigned int a0 = 7;
-	unsigned int t0;
-
-	t0 = pending & 0xf000;
-	t0 = t0 < 1;
-	t0 = t0 << 2;
-	a0 = a0 - t0;
-	pending = pending << t0;
-
-	t0 = pending & 0xc000;
-	t0 = t0 < 1;
-	t0 = t0 << 1;
-	a0 = a0 - t0;
-	pending = pending << t0;
-
-	t0 = pending & 0x8000;
-	t0 = t0 < 1;
-	/* t0 = t0 << 2; */
-	a0 = a0 - t0;
-	/* pending = pending << t0; */
-
-	return a0;
-#endif
-}
-
-/*
- * IRQs on the Malta board look basically (barring software IRQs which we
- * don't use at all and all external interrupt sources are combined together
- * on hardware interrupt 0 (MIPS IRQ 2)) like:
- *
- *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        Combined hardware interrupt (hw0)
- *             3        Hardware (ignored)
- *             4        Hardware (ignored)
- *             5        Hardware (ignored)
- *             6        Hardware (ignored)
- *             7        R4k timer (what we use)
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ----     R4k Timer
- * Lowest  ----     Combined hardware interrupt
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-	int irq;
-
-	irq = irq_ffs(pending);
-
-	if (irq == MIPSCPU_INT_I8259A)
-		malta_hw0_irqdispatch();
-	else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()]))
-		malta_ipi_irqdispatch();
-	else if (irq >= 0)
-		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-	else
-		spurious_interrupt();
-}
-
-#ifdef CONFIG_MIPS_MT_SMP
-
-
-#define GIC_MIPS_CPU_IPI_RESCHED_IRQ	3
-#define GIC_MIPS_CPU_IPI_CALL_IRQ	4
-
-#define MIPS_CPU_IPI_RESCHED_IRQ 0	/* SW int 0 for resched */
-#define C_RESCHED C_SW0
-#define MIPS_CPU_IPI_CALL_IRQ 1		/* SW int 1 for resched */
-#define C_CALL C_SW1
-static int cpu_ipi_resched_irq, cpu_ipi_call_irq;
-
-static void ipi_resched_dispatch(void)
-{
-	do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ);
-}
-
-static void ipi_call_dispatch(void)
-{
-	do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ);
-}
-
-static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
-{
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
-{
-	smp_call_function_interrupt();
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction irq_resched = {
-	.handler	= ipi_resched_interrupt,
-	.flags		= IRQF_DISABLED|IRQF_PERCPU,
-	.name		= "IPI_resched"
-};
-
-static struct irqaction irq_call = {
-	.handler	= ipi_call_interrupt,
-	.flags		= IRQF_DISABLED|IRQF_PERCPU,
-	.name		= "IPI_call"
-};
-#endif /* CONFIG_MIPS_MT_SMP */
-
-static struct irqaction i8259irq = {
-	.handler = no_action,
-	.name = "XT-PIC cascade"
-};
-
-static struct irqaction corehi_irqaction = {
-	.handler = no_action,
-	.name = "CoreHi"
-};
-
-static msc_irqmap_t __initdata msc_irqmap[] = {
-	{MSC01C_INT_TMR,		MSC01_IRQ_EDGE, 0},
-	{MSC01C_INT_PCI,		MSC01_IRQ_LEVEL, 0},
-};
-static int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap);
-
-static msc_irqmap_t __initdata msc_eicirqmap[] = {
-	{MSC01E_INT_SW0,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_SW1,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_I8259A,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_SMI,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_COREHI,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_CORELO,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_TMR,		MSC01_IRQ_EDGE, 0},
-	{MSC01E_INT_PCI,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_PERFCTR,		MSC01_IRQ_LEVEL, 0},
-	{MSC01E_INT_CPUCTR,		MSC01_IRQ_LEVEL, 0}
-};
-
-static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
-
-/*
- * This GIC specific tabular array defines the association between External
- * Interrupts and CPUs/Core Interrupts. The nature of the External
- * Interrupts is also defined here - polarity/trigger.
- */
-static struct gic_intr_map gic_intr_map[] = {
-	{ GIC_EXT_INTR(0), 	X,	X,		X, 		X,		0 },
-	{ GIC_EXT_INTR(1), 	X,	X,		X, 		X,		0 },
-	{ GIC_EXT_INTR(2), 	X,	X,		X, 		X,		0 },
-	{ GIC_EXT_INTR(3), 	0,	GIC_CPU_INT0,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
-	{ GIC_EXT_INTR(4), 	0,	GIC_CPU_INT1,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
-	{ GIC_EXT_INTR(5), 	0,	GIC_CPU_INT2,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
-	{ GIC_EXT_INTR(6), 	0,	GIC_CPU_INT3,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
-	{ GIC_EXT_INTR(7), 	0,	GIC_CPU_INT4,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
-	{ GIC_EXT_INTR(8), 	0,	GIC_CPU_INT3,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
-	{ GIC_EXT_INTR(9), 	0,	GIC_CPU_INT3,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
-	{ GIC_EXT_INTR(10), 	X,	X,		X, 		X,		0 },
-	{ GIC_EXT_INTR(11), 	X,	X,		X, 		X,		0 },
-	{ GIC_EXT_INTR(12), 	0,	GIC_CPU_INT3,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
-	{ GIC_EXT_INTR(13), 	0,	GIC_MAP_TO_NMI_MSK,	GIC_POL_POS, GIC_TRIG_LEVEL,	0 },
-	{ GIC_EXT_INTR(14), 	0,	GIC_MAP_TO_NMI_MSK,	GIC_POL_POS, GIC_TRIG_LEVEL,	0 },
-	{ GIC_EXT_INTR(15), 	X,	X,		X, 		X,		0 },
-	{ GIC_EXT_INTR(16), 	0,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(17), 	0,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(18), 	1,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(19), 	1,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(20), 	2,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(21), 	2,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(22), 	3,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-	{ GIC_EXT_INTR(23), 	3,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
-};
-
-/*
- * GCMP needs to be detected before any SMP initialisation
- */
-int __init gcmp_probe(unsigned long addr, unsigned long size)
-{
-	if (gcmp_present >= 0)
-		return gcmp_present;
-
-	_gcmp_base = (unsigned long) ioremap_nocache(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
-	_msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ);
-	gcmp_present = (GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) == GCMP_BASE_ADDR;
-
-	if (gcmp_present)
-		printk(KERN_DEBUG "GCMP present\n");
-	return gcmp_present;
-}
-
-void __init fill_ipi_map(void)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) {
-		if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X))
-			ipi_map[gic_intr_map[i].cpunum] |=
-				(1 << (gic_intr_map[i].pin + 2));
-	}
-}
-
-void __init arch_init_irq(void)
-{
-	int gic_present, gcmp_present;
-
-	init_i8259_irqs();
-
-	if (!cpu_has_veic)
-		mips_cpu_irq_init();
-
-	gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
-	if (gcmp_present)  {
-		GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK;
-		gic_present = 1;
-	} else {
-		_msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ);
-		gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) &
-		MSC01_SC_CFG_GICPRES_MSK) >> MSC01_SC_CFG_GICPRES_SHF;
-	}
-	if (gic_present)
-		printk(KERN_DEBUG "GIC present\n");
-
-	switch (mips_revision_sconid) {
-	case MIPS_REVISION_SCON_SOCIT:
-	case MIPS_REVISION_SCON_ROCIT:
-		if (cpu_has_veic)
-			init_msc_irqs(MIPS_MSC01_IC_REG_BASE,
-					MSC01E_INT_BASE, msc_eicirqmap,
-					msc_nr_eicirqs);
-		else
-			init_msc_irqs(MIPS_MSC01_IC_REG_BASE,
-					MSC01C_INT_BASE, msc_irqmap,
-					msc_nr_irqs);
-		break;
-
-	case MIPS_REVISION_SCON_SOCITSC:
-	case MIPS_REVISION_SCON_SOCITSCP:
-		if (cpu_has_veic)
-			init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE,
-					MSC01E_INT_BASE, msc_eicirqmap,
-					msc_nr_eicirqs);
-		else
-			init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE,
-					MSC01C_INT_BASE, msc_irqmap,
-					msc_nr_irqs);
-	}
-
-	if (cpu_has_veic) {
-		set_vi_handler(MSC01E_INT_I8259A, malta_hw0_irqdispatch);
-		set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch);
-		setup_irq(MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq);
-		setup_irq(MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction);
-	} else if (cpu_has_vint) {
-		set_vi_handler(MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
-		set_vi_handler(MIPSCPU_INT_COREHI, corehi_irqdispatch);
-#ifdef CONFIG_MIPS_MT_SMTC
-		setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq,
-			(0x100 << MIPSCPU_INT_I8259A));
-		setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
-			&corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI));
-		/*
-		 * Temporary hack to ensure that the subsidiary device
-		 * interrupts coing in via the i8259A, but associated
-		 * with low IRQ numbers, will restore the Status.IM
-		 * value associated with the i8259A.
-		 */
-		{
-			int i;
-
-			for (i = 0; i < 16; i++)
-				irq_hwmask[i] = (0x100 << MIPSCPU_INT_I8259A);
-		}
-#else /* Not SMTC */
-		setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
-		setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
-						&corehi_irqaction);
-#endif /* CONFIG_MIPS_MT_SMTC */
-	} else {
-		setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
-		setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
-						&corehi_irqaction);
-	}
-
-#if defined(CONFIG_MIPS_MT_SMP)
-	if (gic_present) {
-		/* FIXME */
-		int i;
-		struct {
-			unsigned int resched;
-			unsigned int call;
-		} ipiirq[] = {
-			{
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE0,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE0},
-			{
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE1,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE1
-			}, {
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE2,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE2
-			}, {
-				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE3,
-				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE3
-			}
-		};
-#define NIPI (sizeof(ipiirq)/sizeof(ipiirq[0]))
-		fill_ipi_map();
-		gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
-		if (!gcmp_present) {
-			/* Enable the GIC */
-			i = REG(_msc01_biu_base, MSC01_SC_CFG);
-			REG(_msc01_biu_base, MSC01_SC_CFG) =
-				(i | (0x1 << MSC01_SC_CFG_GICENA_SHF));
-			pr_debug("GIC Enabled\n");
-		}
-
-		/* set up ipi interrupts */
-		if (cpu_has_vint) {
-			set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch);
-			set_vi_handler(MIPSCPU_INT_IPI1, malta_ipi_irqdispatch);
-		}
-		/* Argh.. this really needs sorting out.. */
-		printk("CPU%d: status register was %08x\n", smp_processor_id(), read_c0_status());
-		write_c0_status(read_c0_status() | STATUSF_IP3 | STATUSF_IP4);
-		printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status());
-		write_c0_status(0x1100dc00);
-		printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status());
-		for (i = 0; i < NIPI; i++) {
-			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched);
-			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call);
-
-			set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq);
-			set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq);
-		}
-	} else {
-		/* set up ipi interrupts */
-		if (cpu_has_veic) {
-			set_vi_handler (MSC01E_INT_SW0, ipi_resched_dispatch);
-			set_vi_handler (MSC01E_INT_SW1, ipi_call_dispatch);
-			cpu_ipi_resched_irq = MSC01E_INT_SW0;
-			cpu_ipi_call_irq = MSC01E_INT_SW1;
-		} else {
-			if (cpu_has_vint) {
-				set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
-				set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
-			}
-			cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
-			cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ;
-		}
-
-		setup_irq(cpu_ipi_resched_irq, &irq_resched);
-		setup_irq(cpu_ipi_call_irq, &irq_call);
-
-		set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq);
-		set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq);
-	}
-#endif
-}
-
-void malta_be_init(void)
-{
-	if (gcmp_present) {
-		/* Could change CM error mask register */
-	}
-}
-
-
-static char *tr[8] = {
-	"mem",	"gcr",	"gic",	"mmio",
-	"0x04",	"0x05",	"0x06",	"0x07"
-};
-
-static char *mcmd[32] = {
-	[0x00] = "0x00",
-	[0x01] = "Legacy Write",
-	[0x02] = "Legacy Read",
-	[0x03] = "0x03",
-	[0x04] = "0x04",
-	[0x05] = "0x05",
-	[0x06] = "0x06",
-	[0x07] = "0x07",
-	[0x08] = "Coherent Read Own",
-	[0x09] = "Coherent Read Share",
-	[0x0a] = "Coherent Read Discard",
-	[0x0b] = "Coherent Ready Share Always",
-	[0x0c] = "Coherent Upgrade",
-	[0x0d] = "Coherent Writeback",
-	[0x0e] = "0x0e",
-	[0x0f] = "0x0f",
-	[0x10] = "Coherent Copyback",
-	[0x11] = "Coherent Copyback Invalidate",
-	[0x12] = "Coherent Invalidate",
-	[0x13] = "Coherent Write Invalidate",
-	[0x14] = "Coherent Completion Sync",
-	[0x15] = "0x15",
-	[0x16] = "0x16",
-	[0x17] = "0x17",
-	[0x18] = "0x18",
-	[0x19] = "0x19",
-	[0x1a] = "0x1a",
-	[0x1b] = "0x1b",
-	[0x1c] = "0x1c",
-	[0x1d] = "0x1d",
-	[0x1e] = "0x1e",
-	[0x1f] = "0x1f"
-};
-
-static char *core[8] = {
-	"Invalid/OK", 	"Invalid/Data",
-	"Shared/OK",	"Shared/Data",
-	"Modified/OK",	"Modified/Data",
-	"Exclusive/OK",	"Exclusive/Data"
-};
-
-static char *causes[32] = {
-	"None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR",
-	"COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07",
-	"0x08", "0x09", "0x0a", "0x0b",
-	"0x0c", "0x0d", "0x0e", "0x0f",
-	"0x10", "0x11", "0x12", "0x13",
-	"0x14", "0x15", "0x16", "INTVN_WR_ERR",
-	"INTVN_RD_ERR", "0x19", "0x1a", "0x1b",
-	"0x1c", "0x1d", "0x1e", "0x1f"
-};
-
-int malta_be_handler(struct pt_regs *regs, int is_fixup)
-{
-	/* This duplicates the handling in do_be which seems wrong */
-	int retval = is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL;
-
-	if (gcmp_present) {
-		unsigned long cm_error = GCMPGCB(GCMEC);
-		unsigned long cm_addr = GCMPGCB(GCMEA);
-		unsigned long cm_other = GCMPGCB(GCMEO);
-		unsigned long cause, ocause;
-		char buf[256];
-
-		cause = (cm_error & GCMP_GCB_GMEC_ERROR_TYPE_MSK);
-		if (cause != 0) {
-			cause >>= GCMP_GCB_GMEC_ERROR_TYPE_SHF;
-			if (cause < 16) {
-				unsigned long cca_bits = (cm_error >> 15) & 7;
-				unsigned long tr_bits = (cm_error >> 12) & 7;
-				unsigned long mcmd_bits = (cm_error >> 7) & 0x1f;
-				unsigned long stag_bits = (cm_error >> 3) & 15;
-				unsigned long sport_bits = (cm_error >> 0) & 7;
-
-				snprintf(buf, sizeof(buf),
-					 "CCA=%lu TR=%s MCmd=%s STag=%lu "
-					 "SPort=%lu\n",
-					 cca_bits, tr[tr_bits], mcmd[mcmd_bits],
-					 stag_bits, sport_bits);
-			} else {
-				/* glob state & sresp together */
-				unsigned long c3_bits = (cm_error >> 18) & 7;
-				unsigned long c2_bits = (cm_error >> 15) & 7;
-				unsigned long c1_bits = (cm_error >> 12) & 7;
-				unsigned long c0_bits = (cm_error >> 9) & 7;
-				unsigned long sc_bit = (cm_error >> 8) & 1;
-				unsigned long mcmd_bits = (cm_error >> 3) & 0x1f;
-				unsigned long sport_bits = (cm_error >> 0) & 7;
-				snprintf(buf, sizeof(buf),
-					 "C3=%s C2=%s C1=%s C0=%s SC=%s "
-					 "MCmd=%s SPort=%lu\n",
-					 core[c3_bits], core[c2_bits],
-					 core[c1_bits], core[c0_bits],
-					 sc_bit ? "True" : "False",
-					 mcmd[mcmd_bits], sport_bits);
-			}
-
-			ocause = (cm_other & GCMP_GCB_GMEO_ERROR_2ND_MSK) >>
-				 GCMP_GCB_GMEO_ERROR_2ND_SHF;
-
-			printk("CM_ERROR=%08lx %s <%s>\n", cm_error,
-			       causes[cause], buf);
-			printk("CM_ADDR =%08lx\n", cm_addr);
-			printk("CM_OTHER=%08lx %s\n", cm_other, causes[ocause]);
-
-			/* reprime cause register */
-			GCMPGCB(GCMEC) = 0;
-		}
-	}
-
-	return retval;
-}
diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c
deleted file mode 100644
index e7cad54936ca..000000000000
--- a/arch/mips/mips-boards/malta/malta_setup.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) 2008 Dmitri Vorobiev
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/cpu.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/screen_info.h>
-#include <linux/time.h>
-
-#include <asm/bootinfo.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/mips-boards/prom.h>
-#include <asm/mips-boards/malta.h>
-#include <asm/mips-boards/maltaint.h>
-#include <asm/dma.h>
-#include <asm/traps.h>
-#ifdef CONFIG_VT
-#include <linux/console.h>
-#endif
-
-extern void malta_be_init(void);
-extern int malta_be_handler(struct pt_regs *regs, int is_fixup);
-
-static struct resource standard_io_resources[] = {
-	{
-		.name = "dma1",
-		.start = 0x00,
-		.end = 0x1f,
-		.flags = IORESOURCE_BUSY
-	},
-	{
-		.name = "timer",
-		.start = 0x40,
-		.end = 0x5f,
-		.flags = IORESOURCE_BUSY
-	},
-	{
-		.name = "keyboard",
-		.start = 0x60,
-		.end = 0x6f,
-		.flags = IORESOURCE_BUSY
-	},
-	{
-		.name = "dma page reg",
-		.start = 0x80,
-		.end = 0x8f,
-		.flags = IORESOURCE_BUSY
-	},
-	{
-		.name = "dma2",
-		.start = 0xc0,
-		.end = 0xdf,
-		.flags = IORESOURCE_BUSY
-	},
-};
-
-const char *get_system_type(void)
-{
-	return "MIPS Malta";
-}
-
-#if defined(CONFIG_MIPS_MT_SMTC)
-const char display_string[] = "       SMTC LINUX ON MALTA       ";
-#else
-const char display_string[] = "        LINUX ON MALTA       ";
-#endif /* CONFIG_MIPS_MT_SMTC */
-
-#ifdef CONFIG_BLK_DEV_FD
-static void __init fd_activate(void)
-{
-	/*
-	 * Activate Floppy Controller in the SMSC FDC37M817 Super I/O
-	 * Controller.
-	 * Done by YAMON 2.00 onwards
-	 */
-	/* Entering config state. */
-	SMSC_WRITE(SMSC_CONFIG_ENTER, SMSC_CONFIG_REG);
-
-	/* Activate floppy controller. */
-	SMSC_WRITE(SMSC_CONFIG_DEVNUM, SMSC_CONFIG_REG);
-	SMSC_WRITE(SMSC_CONFIG_DEVNUM_FLOPPY, SMSC_DATA_REG);
-	SMSC_WRITE(SMSC_CONFIG_ACTIVATE, SMSC_CONFIG_REG);
-	SMSC_WRITE(SMSC_CONFIG_ACTIVATE_ENABLE, SMSC_DATA_REG);
-
-	/* Exit config state. */
-	SMSC_WRITE(SMSC_CONFIG_EXIT, SMSC_CONFIG_REG);
-}
-#endif
-
-#ifdef CONFIG_BLK_DEV_IDE
-static void __init pci_clock_check(void)
-{
-	unsigned int __iomem *jmpr_p =
-		(unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int));
-	int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07;
-	static const int pciclocks[] __initdata = {
-		33, 20, 25, 30, 12, 16, 37, 10
-	};
-	int pciclock = pciclocks[jmpr];
-	char *argptr = prom_getcmdline();
-
-	if (pciclock != 33 && !strstr(argptr, "idebus=")) {
-		printk(KERN_WARNING "WARNING: PCI clock is %dMHz, "
-				"setting idebus\n", pciclock);
-		argptr += strlen(argptr);
-		sprintf(argptr, " idebus=%d", pciclock);
-		if (pciclock < 20 || pciclock > 66)
-			printk(KERN_WARNING "WARNING: IDE timing "
-					"calculations will be incorrect\n");
-	}
-}
-#endif
-
-#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
-static void __init screen_info_setup(void)
-{
-	screen_info = (struct screen_info) {
-		.orig_x = 0,
-		.orig_y = 25,
-		.ext_mem_k = 0,
-		.orig_video_page = 0,
-		.orig_video_mode = 0,
-		.orig_video_cols = 80,
-		.unused2 = 0,
-		.orig_video_ega_bx = 0,
-		.unused3 = 0,
-		.orig_video_lines = 25,
-		.orig_video_isVGA = VIDEO_TYPE_VGAC,
-		.orig_video_points = 16
-	};
-}
-#endif
-
-static void __init bonito_quirks_setup(void)
-{
-	char *argptr;
-
-	argptr = prom_getcmdline();
-	if (strstr(argptr, "debug")) {
-		BONITO_BONGENCFG |= BONITO_BONGENCFG_DEBUGMODE;
-		printk(KERN_INFO "Enabled Bonito debug mode\n");
-	} else
-		BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE;
-
-#ifdef CONFIG_DMA_COHERENT
-	if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) {
-		BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN;
-		printk(KERN_INFO "Enabled Bonito CPU coherency\n");
-
-		argptr = prom_getcmdline();
-		if (strstr(argptr, "iobcuncached")) {
-			BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN;
-			BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG &
-				~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
-					BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
-			printk(KERN_INFO "Disabled Bonito IOBC coherency\n");
-		} else {
-			BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN;
-			BONITO_PCIMEMBASECFG |=
-				(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
-					BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
-			printk(KERN_INFO "Enabled Bonito IOBC coherency\n");
-		}
-	} else
-		panic("Hardware DMA cache coherency not supported");
-#endif
-}
-
-void __init plat_mem_setup(void)
-{
-	unsigned int i;
-
-	mips_pcibios_init();
-
-	/* Request I/O space for devices used on the Malta board. */
-	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
-		request_resource(&ioport_resource, standard_io_resources+i);
-
-	/*
-	 * Enable DMA channel 4 (cascade channel) in the PIIX4 south bridge.
-	 */
-	enable_dma(4);
-
-#ifdef CONFIG_KGDB
-	kgdb_config();
-#endif
-
-#ifdef CONFIG_DMA_COHERENT
-	if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO)
-		panic("Hardware DMA cache coherency not supported");
-#endif
-
-	if (mips_revision_sconid == MIPS_REVISION_SCON_BONITO)
-		bonito_quirks_setup();
-
-#ifdef CONFIG_BLK_DEV_IDE
-	pci_clock_check();
-#endif
-
-#ifdef CONFIG_BLK_DEV_FD
-	fd_activate();
-#endif
-
-#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
-	screen_info_setup();
-#endif
-	mips_reboot_setup();
-
-	board_be_init = malta_be_init;
-	board_be_handler = malta_be_handler;
-}
diff --git a/arch/mips/mips-boards/sead/Makefile b/arch/mips/mips-boards/sead/Makefile
deleted file mode 100644
index 3682fe217bd5..000000000000
--- a/arch/mips/mips-boards/sead/Makefile
+++ /dev/null
@@ -1,28 +0,0 @@
-#
-# Carsten Langgaard, carstenl@mips.com
-# Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
-#
-# ########################################################################
-#
-# This program is free software; you can distribute it and/or modify it
-# under the terms of the GNU General Public License (Version 2) as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with this program; if not, write to the Free Software Foundation, Inc.,
-# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-#
-# #######################################################################
-#
-# Makefile for the MIPS SEAD specific kernel interface routines
-# under Linux.
-#
-
-obj-y		:= sead_int.o sead_setup.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mips-boards/sead/sead_int.c b/arch/mips/mips-boards/sead/sead_int.c
deleted file mode 100644
index ec6dd194c14a..000000000000
--- a/arch/mips/mips-boards/sead/sead_int.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
- * Copyright (C) 2003 Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2004  Maciej W. Rozycki
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Routines for generic manipulation of the interrupts found on the MIPS
- * Sead board.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-
-#include <asm/mips-boards/seadint.h>
-
-static inline int clz(unsigned long x)
-{
-	__asm__(
-	"	.set	push					\n"
-	"	.set	mips32					\n"
-	"	clz	%0, %1					\n"
-	"	.set	pop					\n"
-	: "=r" (x)
-	: "r" (x));
-
-	return x;
-}
-
-/*
- * Version of ffs that only looks at bits 12..15.
- */
-static inline unsigned int irq_ffs(unsigned int pending)
-{
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-	return -clz(pending) + 31 - CAUSEB_IP;
-#else
-	unsigned int a0 = 7;
-	unsigned int t0;
-
-	t0 = s0 & 0xf000;
-	t0 = t0 < 1;
-	t0 = t0 << 2;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0xc000;
-	t0 = t0 < 1;
-	t0 = t0 << 1;
-	a0 = a0 - t0;
-	s0 = s0 << t0;
-
-	t0 = s0 & 0x8000;
-	t0 = t0 < 1;
-	//t0 = t0 << 2;
-	a0 = a0 - t0;
-	//s0 = s0 << t0;
-
-	return a0;
-#endif
-}
-
-/*
- * IRQs on the SEAD board look basically are combined together on hardware
- * interrupt 0 (MIPS IRQ 2)) like:
- *
- *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        UART0 (hw0)
- *             3        UART1 (hw1)
- *             4        Hardware (ignored)
- *             5        Hardware (ignored)
- *             6        Hardware (ignored)
- *             7        R4k timer (what we use)
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ----     R4k Timer
- * Lowest  ----     Combined hardware interrupt
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
-	int irq;
-
-	irq = irq_ffs(pending);
-
-	if (irq >= 0)
-		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
-	else
-		spurious_interrupt();
-}
-
-void __init arch_init_irq(void)
-{
-	mips_cpu_irq_init();
-}
diff --git a/arch/mips/mips-boards/sead/sead_setup.c b/arch/mips/mips-boards/sead/sead_setup.c
deleted file mode 100644
index 8aa8e5b7b074..000000000000
--- a/arch/mips/mips-boards/sead/sead_setup.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2002 MIPS Technologies, Inc.  All rights reserved.
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * SEAD specific setup.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/mips-boards/generic.h>
-#include <asm/mips-boards/prom.h>
-#include <asm/mips-boards/sead.h>
-#include <asm/mips-boards/seadint.h>
-#include <asm/time.h>
-
-static void __init serial_init(void);
-
-const char *get_system_type(void)
-{
-	return "MIPS SEAD";
-}
-
-const char display_string[] = "        LINUX ON SEAD       ";
-
-void __init plat_mem_setup(void)
-{
-	ioport_resource.end = 0x7fffffff;
-
-	serial_init();
-
-	mips_reboot_setup();
-}
-
-static void __init serial_init(void)
-{
-#ifdef CONFIG_SERIAL_8250
-	struct uart_port s;
-
-	memset(&s, 0, sizeof(s));
-
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-	s.iobase = SEAD_UART0_REGS_BASE;
-#else
-	s.iobase = SEAD_UART0_REGS_BASE+3;
-#endif
-	s.irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_UART0;
-	s.uartclk = SEAD_BASE_BAUD * 16;
-	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
-	s.iotype = UPIO_PORT;
-	s.regshift = 3;
-
-	if (early_serial_setup(&s) != 0) {
-		printk(KERN_ERR "Serial setup failed!\n");
-	}
-#endif
-}
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 48731020ca0e..44e8dd8106bf 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -3,8 +3,7 @@
 #
 
 obj-y				+= cache.o dma-default.o extable.o fault.o \
-				   init.o pgtable.o tlbex.o tlbex-fault.o \
-				   uasm.o page.o
+				   init.o tlbex.o tlbex-fault.o uasm.o page.o
 
 obj-$(CONFIG_32BIT)		+= ioremap.o pgtable-32.o
 obj-$(CONFIG_64BIT)		+= pgtable-64.o
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 27096751ddce..71df3390c07b 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -43,12 +43,12 @@
  *    primary cache.
  */
 static inline void r4k_on_each_cpu(void (*func) (void *info), void *info,
-                                   int retry, int wait)
+                                   int wait)
 {
 	preempt_disable();
 
 #if !defined(CONFIG_MIPS_MT_SMP) && !defined(CONFIG_MIPS_MT_SMTC)
-	smp_call_function(func, info, retry, wait);
+	smp_call_function(func, info, wait);
 #endif
 	func(info);
 	preempt_enable();
@@ -350,7 +350,7 @@ static inline void local_r4k___flush_cache_all(void * args)
 
 static void r4k___flush_cache_all(void)
 {
-	r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1, 1);
+	r4k_on_each_cpu(local_r4k___flush_cache_all, NULL, 1);
 }
 
 static inline int has_valid_asid(const struct mm_struct *mm)
@@ -397,7 +397,7 @@ static void r4k_flush_cache_range(struct vm_area_struct *vma,
 	int exec = vma->vm_flags & VM_EXEC;
 
 	if (cpu_has_dc_aliases || (exec && !cpu_has_ic_fills_f_dc))
-		r4k_on_each_cpu(local_r4k_flush_cache_range, vma, 1, 1);
+		r4k_on_each_cpu(local_r4k_flush_cache_range, vma, 1);
 }
 
 static inline void local_r4k_flush_cache_mm(void * args)
@@ -429,7 +429,7 @@ static void r4k_flush_cache_mm(struct mm_struct *mm)
 	if (!cpu_has_dc_aliases)
 		return;
 
-	r4k_on_each_cpu(local_r4k_flush_cache_mm, mm, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_mm, mm, 1);
 }
 
 struct flush_cache_page_args {
@@ -521,7 +521,7 @@ static void r4k_flush_cache_page(struct vm_area_struct *vma,
 	args.addr = addr;
 	args.pfn = pfn;
 
-	r4k_on_each_cpu(local_r4k_flush_cache_page, &args, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_page, &args, 1);
 }
 
 static inline void local_r4k_flush_data_cache_page(void * addr)
@@ -535,7 +535,7 @@ static void r4k_flush_data_cache_page(unsigned long addr)
 		local_r4k_flush_data_cache_page((void *)addr);
 	else
 		r4k_on_each_cpu(local_r4k_flush_data_cache_page, (void *) addr,
-			        1, 1);
+			        1);
 }
 
 struct flush_icache_range_args {
@@ -571,7 +571,7 @@ static void r4k_flush_icache_range(unsigned long start, unsigned long end)
 	args.start = start;
 	args.end = end;
 
-	r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_icache_range, &args, 1);
 	instruction_hazard();
 }
 
@@ -672,7 +672,7 @@ static void local_r4k_flush_cache_sigtramp(void * arg)
 
 static void r4k_flush_cache_sigtramp(unsigned long addr)
 {
-	r4k_on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1, 1);
+	r4k_on_each_cpu(local_r4k_flush_cache_sigtramp, (void *) addr, 1);
 }
 
 static void r4k_flush_icache_all(void)
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index ae39dd88b9aa..891312f8e5a6 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -348,7 +348,7 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nele
 
 EXPORT_SYMBOL(dma_sync_sg_for_device);
 
-int dma_mapping_error(dma_addr_t dma_addr)
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
 {
 	return 0;
 }
diff --git a/arch/mips/mm/pgtable.c b/arch/mips/mm/pgtable.c
deleted file mode 100644
index 7dfa579ab24c..000000000000
--- a/arch/mips/mm/pgtable.c
+++ /dev/null
@@ -1,36 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-
-void show_mem(void)
-{
-#ifndef CONFIG_NEED_MULTIPLE_NODES  /* XXX(hch): later.. */
-	int pfn, total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-	struct page *page;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	pfn = max_mapnr;
-	while (pfn-- > 0) {
-		if (!pfn_valid(pfn))
-			continue;
-		page = pfn_to_page(pfn);
-		total++;
-		if (PageHighMem(page))
-			highmem++;
-		if (PageReserved(page))
-			reserved++;
-		else if (PageSwapCache(page))
-			cached++;
-		else if (page_count(page))
-			shared += page_count(page) - 1;
-	}
-	printk("%d pages of RAM\n", total);
-	printk("%d pages of HIGHMEM\n", highmem);
-	printk("%d reserved pages\n", reserved);
-	printk("%d pages shared\n", shared);
-	printk("%d pages swap cached\n", cached);
-#endif
-}
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index a782549ac80e..f0cf46adb978 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -246,10 +246,6 @@ void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
 		old_pagemask = read_c0_pagemask();
 		w = read_c0_wired();
 		write_c0_wired(w + 1);
-		if (read_c0_wired() != w + 1) {
-			printk("[tlbwired] No WIRED reg?\n");
-			return;
-		}
 		write_c0_index(w << 8);
 		write_c0_pagemask(pagemask);
 		write_c0_entryhi(entryhi);
diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c
index 1655aa69e133..f467199676a8 100644
--- a/arch/mips/mm/uasm.c
+++ b/arch/mips/mm/uasm.c
@@ -396,7 +396,7 @@ int __cpuinit uasm_in_compat_space_p(long addr)
 #endif
 }
 
-int __cpuinit uasm_rel_highest(long val)
+static int __cpuinit uasm_rel_highest(long val)
 {
 #ifdef CONFIG_64BIT
 	return ((((val + 0x800080008000L) >> 48) & 0xffff) ^ 0x8000) - 0x8000;
@@ -405,7 +405,7 @@ int __cpuinit uasm_rel_highest(long val)
 #endif
 }
 
-int __cpuinit uasm_rel_higher(long val)
+static int __cpuinit uasm_rel_higher(long val)
 {
 #ifdef CONFIG_64BIT
 	return ((((val + 0x80008000L) >> 32) & 0xffff) ^ 0x8000) - 0x8000;
diff --git a/arch/mips/mm/uasm.h b/arch/mips/mm/uasm.h
index 0d6a66f32030..c6d1e3dd82d4 100644
--- a/arch/mips/mm/uasm.h
+++ b/arch/mips/mm/uasm.h
@@ -103,8 +103,6 @@ struct uasm_label {
 void __cpuinit uasm_build_label(struct uasm_label **lab, u32 *addr, int lid);
 #ifdef CONFIG_64BIT
 int uasm_in_compat_space_p(long addr);
-int uasm_rel_highest(long val);
-int uasm_rel_higher(long val);
 #endif
 int uasm_rel_hi(long val);
 int uasm_rel_lo(long val);
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
new file mode 100644
index 000000000000..3b7dd722c32a
--- /dev/null
+++ b/arch/mips/mti-malta/Makefile
@@ -0,0 +1,20 @@
+#
+# Carsten Langgaard, carstenl@mips.com
+# Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+#
+# Copyright (C) 2008 Wind River Systems, Inc.
+#   written by Ralf Baechle <ralf@linux-mips.org>
+#
+obj-y				:= malta-amon.o malta-cmdline.o \
+				   malta-display.o malta-init.o malta-int.o \
+				   malta-memory.o malta-mtd.o \
+				   malta-platform.o malta-reset.o \
+				   malta-setup.o malta-time.o
+
+obj-$(CONFIG_EARLY_PRINTK)	+= malta-console.o
+obj-$(CONFIG_PCI)		+= malta-pci.o
+
+# FIXME FIXME FIXME
+obj-$(CONFIG_MIPS_MT_SMTC)	+= malta_smtc.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/mips-boards/generic/amon.c b/arch/mips/mti-malta/malta-amon.c
index 96236bf33838..96236bf33838 100644
--- a/arch/mips/mips-boards/generic/amon.c
+++ b/arch/mips/mti-malta/malta-amon.c
diff --git a/arch/mips/mips-boards/generic/cmdline.c b/arch/mips/mti-malta/malta-cmdline.c
index 1871c30ed2eb..1871c30ed2eb 100644
--- a/arch/mips/mips-boards/generic/cmdline.c
+++ b/arch/mips/mti-malta/malta-cmdline.c
diff --git a/arch/mips/mti-malta/malta-console.c b/arch/mips/mti-malta/malta-console.c
new file mode 100644
index 000000000000..43bcfb4f8167
--- /dev/null
+++ b/arch/mips/mti-malta/malta-console.c
@@ -0,0 +1,47 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Putting things on the screen/serial line using YAMONs facilities.
+ */
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/serial_reg.h>
+#include <asm/io.h>
+
+
+#define PORT(offset) (0x3f8 + (offset))
+
+
+static inline unsigned int serial_in(int offset)
+{
+	return inb(PORT(offset));
+}
+
+static inline void serial_out(int offset, int value)
+{
+	outb(value, PORT(offset));
+}
+
+int prom_putchar(char c)
+{
+	while ((serial_in(UART_LSR) & UART_LSR_THRE) == 0)
+		;
+
+	serial_out(UART_TX, c);
+
+	return 1;
+}
diff --git a/arch/mips/mti-malta/malta-display.c b/arch/mips/mti-malta/malta-display.c
new file mode 100644
index 000000000000..7c8828fcb0ad
--- /dev/null
+++ b/arch/mips/mti-malta/malta-display.c
@@ -0,0 +1,64 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Display routines for display messages in MIPS boards ascii display.
+ */
+
+#include <linux/compiler.h>
+#include <linux/timer.h>
+#include <asm/io.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+
+extern const char display_string[];
+static unsigned int display_count;
+static unsigned int max_display_count;
+
+void mips_display_message(const char *str)
+{
+	static unsigned int __iomem *display = NULL;
+	int i;
+
+	if (unlikely(display == NULL))
+		display = ioremap(ASCII_DISPLAY_POS_BASE, 16*sizeof(int));
+
+	for (i = 0; i <= 14; i=i+2) {
+	         if (*str)
+		         __raw_writel(*str++, display + i);
+		 else
+		         __raw_writel(' ', display + i);
+	}
+}
+
+static void scroll_display_message(unsigned long data);
+static DEFINE_TIMER(mips_scroll_timer, scroll_display_message, HZ, 0);
+
+static void scroll_display_message(unsigned long data)
+{
+	mips_display_message(&display_string[display_count++]);
+	if (display_count == max_display_count)
+		display_count = 0;
+
+	mod_timer(&mips_scroll_timer, jiffies + HZ);
+}
+
+void mips_scroll_message(void)
+{
+	del_timer_sync(&mips_scroll_timer);
+	max_display_count = strlen(display_string) + 1 - 8;
+	mod_timer(&mips_scroll_timer, jiffies + 1);
+}
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
new file mode 100644
index 000000000000..4832af251668
--- /dev/null
+++ b/arch/mips/mti-malta/malta-init.c
@@ -0,0 +1,370 @@
+/*
+ * Copyright (C) 1999, 2000, 2004, 2005  MIPS Technologies, Inc.
+ *	All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * PROM library initialisation code.
+ */
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+#include <asm/bootinfo.h>
+#include <asm/gt64120.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/cacheflush.h>
+#include <asm/traps.h>
+
+#include <asm/mips-boards/prom.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/bonito64.h>
+#include <asm/mips-boards/msc01_pci.h>
+
+#include <asm/mips-boards/malta.h>
+
+int prom_argc;
+int *_prom_argv, *_prom_envp;
+
+/*
+ * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
+ * This macro take care of sign extension, if running in 64-bit mode.
+ */
+#define prom_envp(index) ((char *)(long)_prom_envp[(index)])
+
+int init_debug = 0;
+
+int mips_revision_corid;
+int mips_revision_sconid;
+
+/* Bonito64 system controller register base. */
+unsigned long _pcictrl_bonito;
+unsigned long _pcictrl_bonito_pcicfg;
+
+/* GT64120 system controller register base */
+unsigned long _pcictrl_gt64120;
+
+/* MIPS System controller register base */
+unsigned long _pcictrl_msc;
+
+char *prom_getenv(char *envname)
+{
+	/*
+	 * Return a pointer to the given environment variable.
+	 * In 64-bit mode: we're using 64-bit pointers, but all pointers
+	 * in the PROM structures are only 32-bit, so we need some
+	 * workarounds, if we are running in 64-bit mode.
+	 */
+	int i, index=0;
+
+	i = strlen(envname);
+
+	while (prom_envp(index)) {
+		if(strncmp(envname, prom_envp(index), i) == 0) {
+			return(prom_envp(index+1));
+		}
+		index += 2;
+	}
+
+	return NULL;
+}
+
+static inline unsigned char str2hexnum(unsigned char c)
+{
+	if (c >= '0' && c <= '9')
+		return c - '0';
+	if (c >= 'a' && c <= 'f')
+		return c - 'a' + 10;
+	return 0; /* foo */
+}
+
+static inline void str2eaddr(unsigned char *ea, unsigned char *str)
+{
+	int i;
+
+	for (i = 0; i < 6; i++) {
+		unsigned char num;
+
+		if((*str == '.') || (*str == ':'))
+			str++;
+		num = str2hexnum(*str++) << 4;
+		num |= (str2hexnum(*str++));
+		ea[i] = num;
+	}
+}
+
+int get_ethernet_addr(char *ethernet_addr)
+{
+        char *ethaddr_str;
+
+        ethaddr_str = prom_getenv("ethaddr");
+	if (!ethaddr_str) {
+	        printk("ethaddr not set in boot prom\n");
+		return -1;
+	}
+	str2eaddr(ethernet_addr, ethaddr_str);
+
+	if (init_debug > 1) {
+	        int i;
+		printk("get_ethernet_addr: ");
+	        for (i=0; i<5; i++)
+		        printk("%02x:", (unsigned char)*(ethernet_addr+i));
+		printk("%02x\n", *(ethernet_addr+i));
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static void __init console_config(void)
+{
+	char console_string[40];
+	int baud = 0;
+	char parity = '\0', bits = '\0', flow = '\0';
+	char *s;
+
+	if ((strstr(prom_getcmdline(), "console=")) == NULL) {
+		s = prom_getenv("modetty0");
+		if (s) {
+			while (*s >= '0' && *s <= '9')
+				baud = baud*10 + *s++ - '0';
+			if (*s == ',') s++;
+			if (*s) parity = *s++;
+			if (*s == ',') s++;
+			if (*s) bits = *s++;
+			if (*s == ',') s++;
+			if (*s == 'h') flow = 'r';
+		}
+		if (baud == 0)
+			baud = 38400;
+		if (parity != 'n' && parity != 'o' && parity != 'e')
+			parity = 'n';
+		if (bits != '7' && bits != '8')
+			bits = '8';
+		if (flow == '\0')
+			flow = 'r';
+		sprintf(console_string, " console=ttyS0,%d%c%c%c", baud, parity, bits, flow);
+		strcat(prom_getcmdline(), console_string);
+		pr_info("Config serial console:%s\n", console_string);
+	}
+}
+#endif
+
+static void __init mips_nmi_setup(void)
+{
+	void *base;
+	extern char except_vec_nmi;
+
+	base = cpu_has_veic ?
+		(void *)(CAC_BASE + 0xa80) :
+		(void *)(CAC_BASE + 0x380);
+	memcpy(base, &except_vec_nmi, 0x80);
+	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
+}
+
+static void __init mips_ejtag_setup(void)
+{
+	void *base;
+	extern char except_vec_ejtag_debug;
+
+	base = cpu_has_veic ?
+		(void *)(CAC_BASE + 0xa00) :
+		(void *)(CAC_BASE + 0x300);
+	memcpy(base, &except_vec_ejtag_debug, 0x80);
+	flush_icache_range((unsigned long)base, (unsigned long)base + 0x80);
+}
+
+extern struct plat_smp_ops msmtc_smp_ops;
+
+void __init prom_init(void)
+{
+	prom_argc = fw_arg0;
+	_prom_argv = (int *) fw_arg1;
+	_prom_envp = (int *) fw_arg2;
+
+	mips_display_message("LINUX");
+
+	/*
+	 * early setup of _pcictrl_bonito so that we can determine
+	 * the system controller on a CORE_EMUL board
+	 */
+	_pcictrl_bonito = (unsigned long)ioremap(BONITO_REG_BASE, BONITO_REG_SIZE);
+
+	mips_revision_corid = MIPS_REVISION_CORID;
+
+	if (mips_revision_corid == MIPS_REVISION_CORID_CORE_EMUL) {
+		if (BONITO_PCIDID == 0x0001df53 ||
+		    BONITO_PCIDID == 0x0003df53)
+			mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_BON;
+		else
+			mips_revision_corid = MIPS_REVISION_CORID_CORE_EMUL_MSC;
+	}
+
+	mips_revision_sconid = MIPS_REVISION_SCONID;
+	if (mips_revision_sconid == MIPS_REVISION_SCON_OTHER) {
+		switch (mips_revision_corid) {
+		case MIPS_REVISION_CORID_QED_RM5261:
+		case MIPS_REVISION_CORID_CORE_LV:
+		case MIPS_REVISION_CORID_CORE_FPGA:
+		case MIPS_REVISION_CORID_CORE_FPGAR2:
+			mips_revision_sconid = MIPS_REVISION_SCON_GT64120;
+			break;
+		case MIPS_REVISION_CORID_CORE_EMUL_BON:
+		case MIPS_REVISION_CORID_BONITO64:
+		case MIPS_REVISION_CORID_CORE_20K:
+			mips_revision_sconid = MIPS_REVISION_SCON_BONITO;
+			break;
+		case MIPS_REVISION_CORID_CORE_MSC:
+		case MIPS_REVISION_CORID_CORE_FPGA2:
+		case MIPS_REVISION_CORID_CORE_24K:
+			/*
+			 * SOCit/ROCit support is essentially identical
+			 * but make an attempt to distinguish them
+			 */
+			mips_revision_sconid = MIPS_REVISION_SCON_SOCIT;
+			break;
+		case MIPS_REVISION_CORID_CORE_FPGA3:
+		case MIPS_REVISION_CORID_CORE_FPGA4:
+		case MIPS_REVISION_CORID_CORE_FPGA5:
+		case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+		default:
+			/* See above */
+			mips_revision_sconid = MIPS_REVISION_SCON_ROCIT;
+			break;
+		}
+	}
+
+	switch (mips_revision_sconid) {
+		u32 start, map, mask, data;
+
+	case MIPS_REVISION_SCON_GT64120:
+		/*
+		 * Setup the North bridge to do Master byte-lane swapping
+		 * when running in bigendian.
+		 */
+		_pcictrl_gt64120 = (unsigned long)ioremap(MIPS_GT_BASE, 0x2000);
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+		GT_WRITE(GT_PCI0_CMD_OFS, GT_PCI0_CMD_MBYTESWAP_BIT |
+			 GT_PCI0_CMD_SBYTESWAP_BIT);
+#else
+		GT_WRITE(GT_PCI0_CMD_OFS, 0);
+#endif
+		/* Fix up PCI I/O mapping if necessary (for Atlas).  */
+		start = GT_READ(GT_PCI0IOLD_OFS);
+		map = GT_READ(GT_PCI0IOREMAP_OFS);
+		if ((start & map) != 0) {
+			map &= ~start;
+			GT_WRITE(GT_PCI0IOREMAP_OFS, map);
+		}
+
+		set_io_port_base(MALTA_GT_PORT_BASE);
+		break;
+
+	case MIPS_REVISION_SCON_BONITO:
+		_pcictrl_bonito_pcicfg = (unsigned long)ioremap(BONITO_PCICFG_BASE, BONITO_PCICFG_SIZE);
+
+		/*
+		 * Disable Bonito IOBC.
+		 */
+		BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG &
+			~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
+			  BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
+
+		/*
+		 * Setup the North bridge to do Master byte-lane swapping
+		 * when running in bigendian.
+		 */
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+		BONITO_BONGENCFG = BONITO_BONGENCFG &
+			~(BONITO_BONGENCFG_MSTRBYTESWAP |
+			  BONITO_BONGENCFG_BYTESWAP);
+#else
+		BONITO_BONGENCFG = BONITO_BONGENCFG |
+			BONITO_BONGENCFG_MSTRBYTESWAP |
+			BONITO_BONGENCFG_BYTESWAP;
+#endif
+
+		set_io_port_base(MALTA_BONITO_PORT_BASE);
+		break;
+
+	case MIPS_REVISION_SCON_SOCIT:
+	case MIPS_REVISION_SCON_ROCIT:
+		_pcictrl_msc = (unsigned long)ioremap(MIPS_MSC01_PCI_REG_BASE, 0x2000);
+	mips_pci_controller:
+		mb();
+		MSC_READ(MSC01_PCI_CFG, data);
+		MSC_WRITE(MSC01_PCI_CFG, data & ~MSC01_PCI_CFG_EN_BIT);
+		wmb();
+
+		/* Fix up lane swapping.  */
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+		MSC_WRITE(MSC01_PCI_SWAP, MSC01_PCI_SWAP_NOSWAP);
+#else
+		MSC_WRITE(MSC01_PCI_SWAP,
+			  MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_IO_SHF |
+			  MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_MEM_SHF |
+			  MSC01_PCI_SWAP_BYTESWAP << MSC01_PCI_SWAP_BAR0_SHF);
+#endif
+		/* Fix up target memory mapping.  */
+		MSC_READ(MSC01_PCI_BAR0, mask);
+		MSC_WRITE(MSC01_PCI_P2SCMSKL, mask & MSC01_PCI_BAR0_SIZE_MSK);
+
+		/* Don't handle target retries indefinitely.  */
+		if ((data & MSC01_PCI_CFG_MAXRTRY_MSK) ==
+		    MSC01_PCI_CFG_MAXRTRY_MSK)
+			data = (data & ~(MSC01_PCI_CFG_MAXRTRY_MSK <<
+					 MSC01_PCI_CFG_MAXRTRY_SHF)) |
+			       ((MSC01_PCI_CFG_MAXRTRY_MSK - 1) <<
+				MSC01_PCI_CFG_MAXRTRY_SHF);
+
+		wmb();
+		MSC_WRITE(MSC01_PCI_CFG, data);
+		mb();
+
+		set_io_port_base(MALTA_MSC_PORT_BASE);
+		break;
+
+	case MIPS_REVISION_SCON_SOCITSC:
+	case MIPS_REVISION_SCON_SOCITSCP:
+		_pcictrl_msc = (unsigned long)ioremap(MIPS_SOCITSC_PCI_REG_BASE, 0x2000);
+		goto mips_pci_controller;
+
+	default:
+		/* Unknown system controller */
+		mips_display_message("SC Error");
+		while (1);   /* We die here... */
+	}
+	board_nmi_handler_setup = mips_nmi_setup;
+	board_ejtag_handler_setup = mips_ejtag_setup;
+
+	pr_info("\nLINUX started...\n");
+	prom_init_cmdline();
+	prom_meminit();
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+	console_config();
+#endif
+#ifdef CONFIG_MIPS_CMP
+	register_smp_ops(&cmp_smp_ops);
+#endif
+#ifdef CONFIG_MIPS_MT_SMP
+	register_smp_ops(&vsmp_smp_ops);
+#endif
+#ifdef CONFIG_MIPS_MT_SMTC
+	register_smp_ops(&msmtc_smp_ops);
+#endif
+}
diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c
new file mode 100644
index 000000000000..ea176113fea9
--- /dev/null
+++ b/arch/mips/mti-malta/malta-int.c
@@ -0,0 +1,712 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000, 2001, 2004 MIPS Technologies, Inc.
+ * Copyright (C) 2001 Ralf Baechle
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Routines for generic manipulation of the interrupts found on the MIPS
+ * Malta board.
+ * The interrupt controller is located in the South Bridge a PIIX4 device
+ * with two internal 82C95 interrupt controllers.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel_stat.h>
+#include <linux/kernel.h>
+#include <linux/random.h>
+
+#include <asm/traps.h>
+#include <asm/i8259.h>
+#include <asm/irq_cpu.h>
+#include <asm/irq_regs.h>
+#include <asm/mips-boards/malta.h>
+#include <asm/mips-boards/maltaint.h>
+#include <asm/mips-boards/piix4.h>
+#include <asm/gt64120.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/msc01_pci.h>
+#include <asm/msc01_ic.h>
+#include <asm/gic.h>
+#include <asm/gcmpregs.h>
+
+int gcmp_present = -1;
+int gic_present;
+static unsigned long _msc01_biu_base;
+static unsigned long _gcmp_base;
+static unsigned int ipi_map[NR_CPUS];
+
+static DEFINE_SPINLOCK(mips_irq_lock);
+
+static inline int mips_pcibios_iack(void)
+{
+	int irq;
+	u32 dummy;
+
+	/*
+	 * Determine highest priority pending interrupt by performing
+	 * a PCI Interrupt Acknowledge cycle.
+	 */
+	switch (mips_revision_sconid) {
+	case MIPS_REVISION_SCON_SOCIT:
+	case MIPS_REVISION_SCON_ROCIT:
+	case MIPS_REVISION_SCON_SOCITSC:
+	case MIPS_REVISION_SCON_SOCITSCP:
+		MSC_READ(MSC01_PCI_IACK, irq);
+		irq &= 0xff;
+		break;
+	case MIPS_REVISION_SCON_GT64120:
+		irq = GT_READ(GT_PCI0_IACK_OFS);
+		irq &= 0xff;
+		break;
+	case MIPS_REVISION_SCON_BONITO:
+		/* The following will generate a PCI IACK cycle on the
+		 * Bonito controller. It's a little bit kludgy, but it
+		 * was the easiest way to implement it in hardware at
+		 * the given time.
+		 */
+		BONITO_PCIMAP_CFG = 0x20000;
+
+		/* Flush Bonito register block */
+		dummy = BONITO_PCIMAP_CFG;
+		iob();    /* sync */
+
+		irq = readl((u32 *)_pcictrl_bonito_pcicfg);
+		iob();    /* sync */
+		irq &= 0xff;
+		BONITO_PCIMAP_CFG = 0;
+		break;
+	default:
+		printk(KERN_WARNING "Unknown system controller.\n");
+		return -1;
+	}
+	return irq;
+}
+
+static inline int get_int(void)
+{
+	unsigned long flags;
+	int irq;
+	spin_lock_irqsave(&mips_irq_lock, flags);
+
+	irq = mips_pcibios_iack();
+
+	/*
+	 * The only way we can decide if an interrupt is spurious
+	 * is by checking the 8259 registers.  This needs a spinlock
+	 * on an SMP system,  so leave it up to the generic code...
+	 */
+
+	spin_unlock_irqrestore(&mips_irq_lock, flags);
+
+	return irq;
+}
+
+static void malta_hw0_irqdispatch(void)
+{
+	int irq;
+
+	irq = get_int();
+	if (irq < 0) {
+		/* interrupt has already been cleared */
+		return;
+	}
+
+	do_IRQ(MALTA_INT_BASE + irq);
+}
+
+static void malta_ipi_irqdispatch(void)
+{
+	int irq;
+
+	irq = gic_get_int();
+	if (irq < 0)
+		return;  /* interrupt has already been cleared */
+
+	do_IRQ(MIPS_GIC_IRQ_BASE + irq);
+}
+
+static void corehi_irqdispatch(void)
+{
+	unsigned int intedge, intsteer, pcicmd, pcibadaddr;
+	unsigned int pcimstat, intisr, inten, intpol;
+	unsigned int intrcause, datalo, datahi;
+	struct pt_regs *regs = get_irq_regs();
+
+	printk(KERN_EMERG "CoreHI interrupt, shouldn't happen, we die here!\n");
+	printk(KERN_EMERG "epc   : %08lx\nStatus: %08lx\n"
+			"Cause : %08lx\nbadVaddr : %08lx\n",
+			regs->cp0_epc, regs->cp0_status,
+			regs->cp0_cause, regs->cp0_badvaddr);
+
+	/* Read all the registers and then print them as there is a
+	   problem with interspersed printk's upsetting the Bonito controller.
+	   Do it for the others too.
+	*/
+
+	switch (mips_revision_sconid) {
+	case MIPS_REVISION_SCON_SOCIT:
+	case MIPS_REVISION_SCON_ROCIT:
+	case MIPS_REVISION_SCON_SOCITSC:
+	case MIPS_REVISION_SCON_SOCITSCP:
+		ll_msc_irq();
+		break;
+	case MIPS_REVISION_SCON_GT64120:
+		intrcause = GT_READ(GT_INTRCAUSE_OFS);
+		datalo = GT_READ(GT_CPUERR_ADDRLO_OFS);
+		datahi = GT_READ(GT_CPUERR_ADDRHI_OFS);
+		printk(KERN_EMERG "GT_INTRCAUSE = %08x\n", intrcause);
+		printk(KERN_EMERG "GT_CPUERR_ADDR = %02x%08x\n",
+				datahi, datalo);
+		break;
+	case MIPS_REVISION_SCON_BONITO:
+		pcibadaddr = BONITO_PCIBADADDR;
+		pcimstat = BONITO_PCIMSTAT;
+		intisr = BONITO_INTISR;
+		inten = BONITO_INTEN;
+		intpol = BONITO_INTPOL;
+		intedge = BONITO_INTEDGE;
+		intsteer = BONITO_INTSTEER;
+		pcicmd = BONITO_PCICMD;
+		printk(KERN_EMERG "BONITO_INTISR = %08x\n", intisr);
+		printk(KERN_EMERG "BONITO_INTEN = %08x\n", inten);
+		printk(KERN_EMERG "BONITO_INTPOL = %08x\n", intpol);
+		printk(KERN_EMERG "BONITO_INTEDGE = %08x\n", intedge);
+		printk(KERN_EMERG "BONITO_INTSTEER = %08x\n", intsteer);
+		printk(KERN_EMERG "BONITO_PCICMD = %08x\n", pcicmd);
+		printk(KERN_EMERG "BONITO_PCIBADADDR = %08x\n", pcibadaddr);
+		printk(KERN_EMERG "BONITO_PCIMSTAT = %08x\n", pcimstat);
+		break;
+	}
+
+	die("CoreHi interrupt", regs);
+}
+
+static inline int clz(unsigned long x)
+{
+	__asm__(
+	"	.set	push					\n"
+	"	.set	mips32					\n"
+	"	clz	%0, %1					\n"
+	"	.set	pop					\n"
+	: "=r" (x)
+	: "r" (x));
+
+	return x;
+}
+
+/*
+ * Version of ffs that only looks at bits 12..15.
+ */
+static inline unsigned int irq_ffs(unsigned int pending)
+{
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+	return -clz(pending) + 31 - CAUSEB_IP;
+#else
+	unsigned int a0 = 7;
+	unsigned int t0;
+
+	t0 = pending & 0xf000;
+	t0 = t0 < 1;
+	t0 = t0 << 2;
+	a0 = a0 - t0;
+	pending = pending << t0;
+
+	t0 = pending & 0xc000;
+	t0 = t0 < 1;
+	t0 = t0 << 1;
+	a0 = a0 - t0;
+	pending = pending << t0;
+
+	t0 = pending & 0x8000;
+	t0 = t0 < 1;
+	/* t0 = t0 << 2; */
+	a0 = a0 - t0;
+	/* pending = pending << t0; */
+
+	return a0;
+#endif
+}
+
+/*
+ * IRQs on the Malta board look basically (barring software IRQs which we
+ * don't use at all and all external interrupt sources are combined together
+ * on hardware interrupt 0 (MIPS IRQ 2)) like:
+ *
+ *	MIPS IRQ	Source
+ *      --------        ------
+ *             0	Software (ignored)
+ *             1        Software (ignored)
+ *             2        Combined hardware interrupt (hw0)
+ *             3        Hardware (ignored)
+ *             4        Hardware (ignored)
+ *             5        Hardware (ignored)
+ *             6        Hardware (ignored)
+ *             7        R4k timer (what we use)
+ *
+ * We handle the IRQ according to _our_ priority which is:
+ *
+ * Highest ----     R4k Timer
+ * Lowest  ----     Combined hardware interrupt
+ *
+ * then we just return, if multiple IRQs are pending then we will just take
+ * another exception, big deal.
+ */
+
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+	int irq;
+
+	irq = irq_ffs(pending);
+
+	if (irq == MIPSCPU_INT_I8259A)
+		malta_hw0_irqdispatch();
+	else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()]))
+		malta_ipi_irqdispatch();
+	else if (irq >= 0)
+		do_IRQ(MIPS_CPU_IRQ_BASE + irq);
+	else
+		spurious_interrupt();
+}
+
+#ifdef CONFIG_MIPS_MT_SMP
+
+
+#define GIC_MIPS_CPU_IPI_RESCHED_IRQ	3
+#define GIC_MIPS_CPU_IPI_CALL_IRQ	4
+
+#define MIPS_CPU_IPI_RESCHED_IRQ 0	/* SW int 0 for resched */
+#define C_RESCHED C_SW0
+#define MIPS_CPU_IPI_CALL_IRQ 1		/* SW int 1 for resched */
+#define C_CALL C_SW1
+static int cpu_ipi_resched_irq, cpu_ipi_call_irq;
+
+static void ipi_resched_dispatch(void)
+{
+	do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ);
+}
+
+static void ipi_call_dispatch(void)
+{
+	do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ);
+}
+
+static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
+{
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ipi_call_interrupt(int irq, void *dev_id)
+{
+	smp_call_function_interrupt();
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction irq_resched = {
+	.handler	= ipi_resched_interrupt,
+	.flags		= IRQF_DISABLED|IRQF_PERCPU,
+	.name		= "IPI_resched"
+};
+
+static struct irqaction irq_call = {
+	.handler	= ipi_call_interrupt,
+	.flags		= IRQF_DISABLED|IRQF_PERCPU,
+	.name		= "IPI_call"
+};
+#endif /* CONFIG_MIPS_MT_SMP */
+
+static struct irqaction i8259irq = {
+	.handler = no_action,
+	.name = "XT-PIC cascade"
+};
+
+static struct irqaction corehi_irqaction = {
+	.handler = no_action,
+	.name = "CoreHi"
+};
+
+static msc_irqmap_t __initdata msc_irqmap[] = {
+	{MSC01C_INT_TMR,		MSC01_IRQ_EDGE, 0},
+	{MSC01C_INT_PCI,		MSC01_IRQ_LEVEL, 0},
+};
+static int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap);
+
+static msc_irqmap_t __initdata msc_eicirqmap[] = {
+	{MSC01E_INT_SW0,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_SW1,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_I8259A,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_SMI,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_COREHI,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_CORELO,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_TMR,		MSC01_IRQ_EDGE, 0},
+	{MSC01E_INT_PCI,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_PERFCTR,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_CPUCTR,		MSC01_IRQ_LEVEL, 0}
+};
+
+static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
+
+#if defined(CONFIG_MIPS_MT_SMP)
+/*
+ * This GIC specific tabular array defines the association between External
+ * Interrupts and CPUs/Core Interrupts. The nature of the External
+ * Interrupts is also defined here - polarity/trigger.
+ */
+static struct gic_intr_map gic_intr_map[] = {
+	{ GIC_EXT_INTR(0), 	X,	X,		X, 		X,		0 },
+	{ GIC_EXT_INTR(1), 	X,	X,		X, 		X,		0 },
+	{ GIC_EXT_INTR(2), 	X,	X,		X, 		X,		0 },
+	{ GIC_EXT_INTR(3), 	0,	GIC_CPU_INT0,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(4), 	0,	GIC_CPU_INT1,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(5), 	0,	GIC_CPU_INT2,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(6), 	0,	GIC_CPU_INT3,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(7), 	0,	GIC_CPU_INT4,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(8), 	0,	GIC_CPU_INT3,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(9), 	0,	GIC_CPU_INT3,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(10), 	X,	X,		X, 		X,		0 },
+	{ GIC_EXT_INTR(11), 	X,	X,		X, 		X,		0 },
+	{ GIC_EXT_INTR(12), 	0,	GIC_CPU_INT3,	GIC_POL_POS, 	GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(13), 	0,	GIC_MAP_TO_NMI_MSK,	GIC_POL_POS, GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(14), 	0,	GIC_MAP_TO_NMI_MSK,	GIC_POL_POS, GIC_TRIG_LEVEL,	0 },
+	{ GIC_EXT_INTR(15), 	X,	X,		X, 		X,		0 },
+	{ GIC_EXT_INTR(16), 	0,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+	{ GIC_EXT_INTR(17), 	0,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+	{ GIC_EXT_INTR(18), 	1,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+	{ GIC_EXT_INTR(19), 	1,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+	{ GIC_EXT_INTR(20), 	2,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+	{ GIC_EXT_INTR(21), 	2,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+	{ GIC_EXT_INTR(22), 	3,	GIC_CPU_INT1,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+	{ GIC_EXT_INTR(23), 	3,	GIC_CPU_INT2,	GIC_POL_POS, GIC_TRIG_EDGE,	1 },
+};
+#endif
+
+/*
+ * GCMP needs to be detected before any SMP initialisation
+ */
+static int __init gcmp_probe(unsigned long addr, unsigned long size)
+{
+	if (gcmp_present >= 0)
+		return gcmp_present;
+
+	_gcmp_base = (unsigned long) ioremap_nocache(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
+	_msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ);
+	gcmp_present = (GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) == GCMP_BASE_ADDR;
+
+	if (gcmp_present)
+		printk(KERN_DEBUG "GCMP present\n");
+	return gcmp_present;
+}
+
+#if defined(CONFIG_MIPS_MT_SMP)
+static void __init fill_ipi_map(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) {
+		if (gic_intr_map[i].ipiflag && (gic_intr_map[i].cpunum != X))
+			ipi_map[gic_intr_map[i].cpunum] |=
+				(1 << (gic_intr_map[i].pin + 2));
+	}
+}
+#endif
+
+void __init arch_init_irq(void)
+{
+	int gic_present, gcmp_present;
+
+	init_i8259_irqs();
+
+	if (!cpu_has_veic)
+		mips_cpu_irq_init();
+
+	gcmp_present = gcmp_probe(GCMP_BASE_ADDR, GCMP_ADDRSPACE_SZ);
+	if (gcmp_present)  {
+		GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK;
+		gic_present = 1;
+	} else {
+		_msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ);
+		gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) &
+		MSC01_SC_CFG_GICPRES_MSK) >> MSC01_SC_CFG_GICPRES_SHF;
+	}
+	if (gic_present)
+		printk(KERN_DEBUG "GIC present\n");
+
+	switch (mips_revision_sconid) {
+	case MIPS_REVISION_SCON_SOCIT:
+	case MIPS_REVISION_SCON_ROCIT:
+		if (cpu_has_veic)
+			init_msc_irqs(MIPS_MSC01_IC_REG_BASE,
+					MSC01E_INT_BASE, msc_eicirqmap,
+					msc_nr_eicirqs);
+		else
+			init_msc_irqs(MIPS_MSC01_IC_REG_BASE,
+					MSC01C_INT_BASE, msc_irqmap,
+					msc_nr_irqs);
+		break;
+
+	case MIPS_REVISION_SCON_SOCITSC:
+	case MIPS_REVISION_SCON_SOCITSCP:
+		if (cpu_has_veic)
+			init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE,
+					MSC01E_INT_BASE, msc_eicirqmap,
+					msc_nr_eicirqs);
+		else
+			init_msc_irqs(MIPS_SOCITSC_IC_REG_BASE,
+					MSC01C_INT_BASE, msc_irqmap,
+					msc_nr_irqs);
+	}
+
+	if (cpu_has_veic) {
+		set_vi_handler(MSC01E_INT_I8259A, malta_hw0_irqdispatch);
+		set_vi_handler(MSC01E_INT_COREHI, corehi_irqdispatch);
+		setup_irq(MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq);
+		setup_irq(MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction);
+	} else if (cpu_has_vint) {
+		set_vi_handler(MIPSCPU_INT_I8259A, malta_hw0_irqdispatch);
+		set_vi_handler(MIPSCPU_INT_COREHI, corehi_irqdispatch);
+#ifdef CONFIG_MIPS_MT_SMTC
+		setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq,
+			(0x100 << MIPSCPU_INT_I8259A));
+		setup_irq_smtc(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
+			&corehi_irqaction, (0x100 << MIPSCPU_INT_COREHI));
+		/*
+		 * Temporary hack to ensure that the subsidiary device
+		 * interrupts coing in via the i8259A, but associated
+		 * with low IRQ numbers, will restore the Status.IM
+		 * value associated with the i8259A.
+		 */
+		{
+			int i;
+
+			for (i = 0; i < 16; i++)
+				irq_hwmask[i] = (0x100 << MIPSCPU_INT_I8259A);
+		}
+#else /* Not SMTC */
+		setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
+		setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
+						&corehi_irqaction);
+#endif /* CONFIG_MIPS_MT_SMTC */
+	} else {
+		setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_I8259A, &i8259irq);
+		setup_irq(MIPS_CPU_IRQ_BASE+MIPSCPU_INT_COREHI,
+						&corehi_irqaction);
+	}
+
+#if defined(CONFIG_MIPS_MT_SMP)
+	if (gic_present) {
+		/* FIXME */
+		int i;
+		struct {
+			unsigned int resched;
+			unsigned int call;
+		} ipiirq[] = {
+			{
+				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE0,
+				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE0},
+			{
+				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE1,
+				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE1
+			}, {
+				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE2,
+				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE2
+			}, {
+				.resched = GIC_IPI_EXT_INTR_RESCHED_VPE3,
+				.call =  GIC_IPI_EXT_INTR_CALLFNC_VPE3
+			}
+		};
+		fill_ipi_map();
+		gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
+		if (!gcmp_present) {
+			/* Enable the GIC */
+			i = REG(_msc01_biu_base, MSC01_SC_CFG);
+			REG(_msc01_biu_base, MSC01_SC_CFG) =
+				(i | (0x1 << MSC01_SC_CFG_GICENA_SHF));
+			pr_debug("GIC Enabled\n");
+		}
+
+		/* set up ipi interrupts */
+		if (cpu_has_vint) {
+			set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch);
+			set_vi_handler(MIPSCPU_INT_IPI1, malta_ipi_irqdispatch);
+		}
+		/* Argh.. this really needs sorting out.. */
+		printk("CPU%d: status register was %08x\n", smp_processor_id(), read_c0_status());
+		write_c0_status(read_c0_status() | STATUSF_IP3 | STATUSF_IP4);
+		printk("CPU%d: status register now %08x\n", smp_processor_id(), read_c0_status());
+		write_c0_status(0x1100dc00);
+		printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status());
+		for (i = 0; i < ARRAY_SIZE(ipiirq); i++) {
+			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, &irq_resched);
+			setup_irq(MIPS_GIC_IRQ_BASE + ipiirq[i].call, &irq_call);
+
+			set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].resched, handle_percpu_irq);
+			set_irq_handler(MIPS_GIC_IRQ_BASE + ipiirq[i].call, handle_percpu_irq);
+		}
+	} else {
+		/* set up ipi interrupts */
+		if (cpu_has_veic) {
+			set_vi_handler (MSC01E_INT_SW0, ipi_resched_dispatch);
+			set_vi_handler (MSC01E_INT_SW1, ipi_call_dispatch);
+			cpu_ipi_resched_irq = MSC01E_INT_SW0;
+			cpu_ipi_call_irq = MSC01E_INT_SW1;
+		} else {
+			if (cpu_has_vint) {
+				set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
+				set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
+			}
+			cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
+			cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ;
+		}
+
+		setup_irq(cpu_ipi_resched_irq, &irq_resched);
+		setup_irq(cpu_ipi_call_irq, &irq_call);
+
+		set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq);
+		set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq);
+	}
+#endif
+}
+
+void malta_be_init(void)
+{
+	if (gcmp_present) {
+		/* Could change CM error mask register */
+	}
+}
+
+
+static char *tr[8] = {
+	"mem",	"gcr",	"gic",	"mmio",
+	"0x04",	"0x05",	"0x06",	"0x07"
+};
+
+static char *mcmd[32] = {
+	[0x00] = "0x00",
+	[0x01] = "Legacy Write",
+	[0x02] = "Legacy Read",
+	[0x03] = "0x03",
+	[0x04] = "0x04",
+	[0x05] = "0x05",
+	[0x06] = "0x06",
+	[0x07] = "0x07",
+	[0x08] = "Coherent Read Own",
+	[0x09] = "Coherent Read Share",
+	[0x0a] = "Coherent Read Discard",
+	[0x0b] = "Coherent Ready Share Always",
+	[0x0c] = "Coherent Upgrade",
+	[0x0d] = "Coherent Writeback",
+	[0x0e] = "0x0e",
+	[0x0f] = "0x0f",
+	[0x10] = "Coherent Copyback",
+	[0x11] = "Coherent Copyback Invalidate",
+	[0x12] = "Coherent Invalidate",
+	[0x13] = "Coherent Write Invalidate",
+	[0x14] = "Coherent Completion Sync",
+	[0x15] = "0x15",
+	[0x16] = "0x16",
+	[0x17] = "0x17",
+	[0x18] = "0x18",
+	[0x19] = "0x19",
+	[0x1a] = "0x1a",
+	[0x1b] = "0x1b",
+	[0x1c] = "0x1c",
+	[0x1d] = "0x1d",
+	[0x1e] = "0x1e",
+	[0x1f] = "0x1f"
+};
+
+static char *core[8] = {
+	"Invalid/OK", 	"Invalid/Data",
+	"Shared/OK",	"Shared/Data",
+	"Modified/OK",	"Modified/Data",
+	"Exclusive/OK",	"Exclusive/Data"
+};
+
+static char *causes[32] = {
+	"None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR",
+	"COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07",
+	"0x08", "0x09", "0x0a", "0x0b",
+	"0x0c", "0x0d", "0x0e", "0x0f",
+	"0x10", "0x11", "0x12", "0x13",
+	"0x14", "0x15", "0x16", "INTVN_WR_ERR",
+	"INTVN_RD_ERR", "0x19", "0x1a", "0x1b",
+	"0x1c", "0x1d", "0x1e", "0x1f"
+};
+
+int malta_be_handler(struct pt_regs *regs, int is_fixup)
+{
+	/* This duplicates the handling in do_be which seems wrong */
+	int retval = is_fixup ? MIPS_BE_FIXUP : MIPS_BE_FATAL;
+
+	if (gcmp_present) {
+		unsigned long cm_error = GCMPGCB(GCMEC);
+		unsigned long cm_addr = GCMPGCB(GCMEA);
+		unsigned long cm_other = GCMPGCB(GCMEO);
+		unsigned long cause, ocause;
+		char buf[256];
+
+		cause = (cm_error & GCMP_GCB_GMEC_ERROR_TYPE_MSK);
+		if (cause != 0) {
+			cause >>= GCMP_GCB_GMEC_ERROR_TYPE_SHF;
+			if (cause < 16) {
+				unsigned long cca_bits = (cm_error >> 15) & 7;
+				unsigned long tr_bits = (cm_error >> 12) & 7;
+				unsigned long mcmd_bits = (cm_error >> 7) & 0x1f;
+				unsigned long stag_bits = (cm_error >> 3) & 15;
+				unsigned long sport_bits = (cm_error >> 0) & 7;
+
+				snprintf(buf, sizeof(buf),
+					 "CCA=%lu TR=%s MCmd=%s STag=%lu "
+					 "SPort=%lu\n",
+					 cca_bits, tr[tr_bits], mcmd[mcmd_bits],
+					 stag_bits, sport_bits);
+			} else {
+				/* glob state & sresp together */
+				unsigned long c3_bits = (cm_error >> 18) & 7;
+				unsigned long c2_bits = (cm_error >> 15) & 7;
+				unsigned long c1_bits = (cm_error >> 12) & 7;
+				unsigned long c0_bits = (cm_error >> 9) & 7;
+				unsigned long sc_bit = (cm_error >> 8) & 1;
+				unsigned long mcmd_bits = (cm_error >> 3) & 0x1f;
+				unsigned long sport_bits = (cm_error >> 0) & 7;
+				snprintf(buf, sizeof(buf),
+					 "C3=%s C2=%s C1=%s C0=%s SC=%s "
+					 "MCmd=%s SPort=%lu\n",
+					 core[c3_bits], core[c2_bits],
+					 core[c1_bits], core[c0_bits],
+					 sc_bit ? "True" : "False",
+					 mcmd[mcmd_bits], sport_bits);
+			}
+
+			ocause = (cm_other & GCMP_GCB_GMEO_ERROR_2ND_MSK) >>
+				 GCMP_GCB_GMEO_ERROR_2ND_SHF;
+
+			printk("CM_ERROR=%08lx %s <%s>\n", cm_error,
+			       causes[cause], buf);
+			printk("CM_ADDR =%08lx\n", cm_addr);
+			printk("CM_OTHER=%08lx %s\n", cm_other, causes[ocause]);
+
+			/* reprime cause register */
+			GCMPGCB(GCMEC) = 0;
+		}
+	}
+
+	return retval;
+}
diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c
new file mode 100644
index 000000000000..61888ff72c87
--- /dev/null
+++ b/arch/mips/mti-malta/malta-memory.c
@@ -0,0 +1,177 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * PROM library functions for acquiring/using memory descriptors given to
+ * us from the YAMON.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/pfn.h>
+#include <linux/string.h>
+
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+
+#include <asm/mips-boards/prom.h>
+
+/*#define DEBUG*/
+
+enum yamon_memtypes {
+	yamon_dontuse,
+	yamon_prom,
+	yamon_free,
+};
+static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS];
+
+#ifdef DEBUG
+static char *mtypes[3] = {
+	"Dont use memory",
+	"YAMON PROM memory",
+	"Free memmory",
+};
+#endif
+
+/* determined physical memory size, not overridden by command line args  */
+unsigned long physical_memsize = 0L;
+
+static struct prom_pmemblock * __init prom_getmdesc(void)
+{
+	char *memsize_str;
+	unsigned int memsize;
+	char cmdline[CL_SIZE], *ptr;
+
+	/* otherwise look in the environment */
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str) {
+		printk(KERN_WARNING
+		       "memsize not set in boot prom, set to default (32Mb)\n");
+		physical_memsize = 0x02000000;
+	} else {
+#ifdef DEBUG
+		pr_debug("prom_memsize = %s\n", memsize_str);
+#endif
+		physical_memsize = simple_strtol(memsize_str, NULL, 0);
+	}
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	/* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last
+	   word of physical memory */
+	physical_memsize -= PAGE_SIZE;
+#endif
+
+	/* Check the command line for a memsize directive that overrides
+	   the physical/default amount */
+	strcpy(cmdline, arcs_cmdline);
+	ptr = strstr(cmdline, "memsize=");
+	if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' '))
+		ptr = strstr(ptr, " memsize=");
+
+	if (ptr)
+		memsize = memparse(ptr + 8, &ptr);
+	else
+		memsize = physical_memsize;
+
+	memset(mdesc, 0, sizeof(mdesc));
+
+	mdesc[0].type = yamon_dontuse;
+	mdesc[0].base = 0x00000000;
+	mdesc[0].size = 0x00001000;
+
+	mdesc[1].type = yamon_prom;
+	mdesc[1].base = 0x00001000;
+	mdesc[1].size = 0x000ef000;
+
+	/*
+	 * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the
+	 * south bridge and PCI access always forwarded to the ISA Bus and
+	 * BIOSCS# is always generated.
+	 * This mean that this area can't be used as DMA memory for PCI
+	 * devices.
+	 */
+	mdesc[2].type = yamon_dontuse;
+	mdesc[2].base = 0x000f0000;
+	mdesc[2].size = 0x00010000;
+
+	mdesc[3].type = yamon_dontuse;
+	mdesc[3].base = 0x00100000;
+	mdesc[3].size = CPHYSADDR(PFN_ALIGN((unsigned long)&_end)) - mdesc[3].base;
+
+	mdesc[4].type = yamon_free;
+	mdesc[4].base = CPHYSADDR(PFN_ALIGN(&_end));
+	mdesc[4].size = memsize - mdesc[4].base;
+
+	return &mdesc[0];
+}
+
+static int __init prom_memtype_classify(unsigned int type)
+{
+	switch (type) {
+	case yamon_free:
+		return BOOT_MEM_RAM;
+	case yamon_prom:
+		return BOOT_MEM_ROM_DATA;
+	default:
+		return BOOT_MEM_RESERVED;
+	}
+}
+
+void __init prom_meminit(void)
+{
+	struct prom_pmemblock *p;
+
+#ifdef DEBUG
+	pr_debug("YAMON MEMORY DESCRIPTOR dump:\n");
+	p = prom_getmdesc();
+	while (p->size) {
+		int i = 0;
+		pr_debug("[%d,%p]: base<%08lx> size<%08lx> type<%s>\n",
+			 i, p, p->base, p->size, mtypes[p->type]);
+		p++;
+		i++;
+	}
+#endif
+	p = prom_getmdesc();
+
+	while (p->size) {
+		long type;
+		unsigned long base, size;
+
+		type = prom_memtype_classify(p->type);
+		base = p->base;
+		size = p->size;
+
+		add_memory_region(base, size, type);
+                p++;
+	}
+}
+
+void __init prom_free_prom_memory(void)
+{
+	unsigned long addr;
+	int i;
+
+	for (i = 0; i < boot_mem_map.nr_map; i++) {
+		if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
+			continue;
+
+		addr = boot_mem_map.map[i].addr;
+		free_init_pages("prom memory",
+				addr, addr + boot_mem_map.map[i].size);
+	}
+}
diff --git a/arch/mips/mips-boards/malta/malta_mtd.c b/arch/mips/mti-malta/malta-mtd.c
index 8ad9bdf25dce..8ad9bdf25dce 100644
--- a/arch/mips/mips-boards/malta/malta_mtd.c
+++ b/arch/mips/mti-malta/malta-mtd.c
diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mti-malta/malta-pci.c
index b9743190609a..b9743190609a 100644
--- a/arch/mips/mips-boards/generic/pci.c
+++ b/arch/mips/mti-malta/malta-pci.c
diff --git a/arch/mips/mips-boards/malta/malta_platform.c b/arch/mips/mti-malta/malta-platform.c
index 83b9bab3cd3f..83b9bab3cd3f 100644
--- a/arch/mips/mips-boards/malta/malta_platform.c
+++ b/arch/mips/mti-malta/malta-platform.c
diff --git a/arch/mips/mti-malta/malta-reset.c b/arch/mips/mti-malta/malta-reset.c
new file mode 100644
index 000000000000..42dee4da37ba
--- /dev/null
+++ b/arch/mips/mti-malta/malta-reset.c
@@ -0,0 +1,56 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ * ########################################################################
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * ########################################################################
+ *
+ * Reset the MIPS boards.
+ *
+ */
+#include <linux/pm.h>
+
+#include <asm/io.h>
+#include <asm/reboot.h>
+#include <asm/mips-boards/generic.h>
+
+static void mips_machine_restart(char *command);
+static void mips_machine_halt(void);
+
+static void mips_machine_restart(char *command)
+{
+	unsigned int __iomem *softres_reg =
+		ioremap(SOFTRES_REG, sizeof(unsigned int));
+
+	__raw_writel(GORESET, softres_reg);
+}
+
+static void mips_machine_halt(void)
+{
+	unsigned int __iomem *softres_reg =
+		ioremap(SOFTRES_REG, sizeof(unsigned int));
+
+	__raw_writel(GORESET, softres_reg);
+}
+
+
+void mips_reboot_setup(void)
+{
+	_machine_restart = mips_machine_restart;
+	_machine_halt = mips_machine_halt;
+	pm_power_off = mips_machine_halt;
+}
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
new file mode 100644
index 000000000000..dc78b8983eeb
--- /dev/null
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -0,0 +1,225 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 2008 Dmitri Vorobiev
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ */
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/screen_info.h>
+#include <linux/time.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+#include <asm/mips-boards/malta.h>
+#include <asm/mips-boards/maltaint.h>
+#include <asm/dma.h>
+#include <asm/traps.h>
+#ifdef CONFIG_VT
+#include <linux/console.h>
+#endif
+
+extern void malta_be_init(void);
+extern int malta_be_handler(struct pt_regs *regs, int is_fixup);
+
+static struct resource standard_io_resources[] = {
+	{
+		.name = "dma1",
+		.start = 0x00,
+		.end = 0x1f,
+		.flags = IORESOURCE_BUSY
+	},
+	{
+		.name = "timer",
+		.start = 0x40,
+		.end = 0x5f,
+		.flags = IORESOURCE_BUSY
+	},
+	{
+		.name = "keyboard",
+		.start = 0x60,
+		.end = 0x6f,
+		.flags = IORESOURCE_BUSY
+	},
+	{
+		.name = "dma page reg",
+		.start = 0x80,
+		.end = 0x8f,
+		.flags = IORESOURCE_BUSY
+	},
+	{
+		.name = "dma2",
+		.start = 0xc0,
+		.end = 0xdf,
+		.flags = IORESOURCE_BUSY
+	},
+};
+
+const char *get_system_type(void)
+{
+	return "MIPS Malta";
+}
+
+#if defined(CONFIG_MIPS_MT_SMTC)
+const char display_string[] = "       SMTC LINUX ON MALTA       ";
+#else
+const char display_string[] = "        LINUX ON MALTA       ";
+#endif /* CONFIG_MIPS_MT_SMTC */
+
+#ifdef CONFIG_BLK_DEV_FD
+static void __init fd_activate(void)
+{
+	/*
+	 * Activate Floppy Controller in the SMSC FDC37M817 Super I/O
+	 * Controller.
+	 * Done by YAMON 2.00 onwards
+	 */
+	/* Entering config state. */
+	SMSC_WRITE(SMSC_CONFIG_ENTER, SMSC_CONFIG_REG);
+
+	/* Activate floppy controller. */
+	SMSC_WRITE(SMSC_CONFIG_DEVNUM, SMSC_CONFIG_REG);
+	SMSC_WRITE(SMSC_CONFIG_DEVNUM_FLOPPY, SMSC_DATA_REG);
+	SMSC_WRITE(SMSC_CONFIG_ACTIVATE, SMSC_CONFIG_REG);
+	SMSC_WRITE(SMSC_CONFIG_ACTIVATE_ENABLE, SMSC_DATA_REG);
+
+	/* Exit config state. */
+	SMSC_WRITE(SMSC_CONFIG_EXIT, SMSC_CONFIG_REG);
+}
+#endif
+
+#ifdef CONFIG_BLK_DEV_IDE
+static void __init pci_clock_check(void)
+{
+	unsigned int __iomem *jmpr_p =
+		(unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int));
+	int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07;
+	static const int pciclocks[] __initdata = {
+		33, 20, 25, 30, 12, 16, 37, 10
+	};
+	int pciclock = pciclocks[jmpr];
+	char *argptr = prom_getcmdline();
+
+	if (pciclock != 33 && !strstr(argptr, "idebus=")) {
+		printk(KERN_WARNING "WARNING: PCI clock is %dMHz, "
+				"setting idebus\n", pciclock);
+		argptr += strlen(argptr);
+		sprintf(argptr, " idebus=%d", pciclock);
+		if (pciclock < 20 || pciclock > 66)
+			printk(KERN_WARNING "WARNING: IDE timing "
+					"calculations will be incorrect\n");
+	}
+}
+#endif
+
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
+static void __init screen_info_setup(void)
+{
+	screen_info = (struct screen_info) {
+		.orig_x = 0,
+		.orig_y = 25,
+		.ext_mem_k = 0,
+		.orig_video_page = 0,
+		.orig_video_mode = 0,
+		.orig_video_cols = 80,
+		.unused2 = 0,
+		.orig_video_ega_bx = 0,
+		.unused3 = 0,
+		.orig_video_lines = 25,
+		.orig_video_isVGA = VIDEO_TYPE_VGAC,
+		.orig_video_points = 16
+	};
+}
+#endif
+
+static void __init bonito_quirks_setup(void)
+{
+	char *argptr;
+
+	argptr = prom_getcmdline();
+	if (strstr(argptr, "debug")) {
+		BONITO_BONGENCFG |= BONITO_BONGENCFG_DEBUGMODE;
+		printk(KERN_INFO "Enabled Bonito debug mode\n");
+	} else
+		BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE;
+
+#ifdef CONFIG_DMA_COHERENT
+	if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) {
+		BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN;
+		printk(KERN_INFO "Enabled Bonito CPU coherency\n");
+
+		argptr = prom_getcmdline();
+		if (strstr(argptr, "iobcuncached")) {
+			BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN;
+			BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG &
+				~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
+					BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
+			printk(KERN_INFO "Disabled Bonito IOBC coherency\n");
+		} else {
+			BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN;
+			BONITO_PCIMEMBASECFG |=
+				(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED |
+					BONITO_PCIMEMBASECFG_MEMBASE1_CACHED);
+			printk(KERN_INFO "Enabled Bonito IOBC coherency\n");
+		}
+	} else
+		panic("Hardware DMA cache coherency not supported");
+#endif
+}
+
+void __init plat_mem_setup(void)
+{
+	unsigned int i;
+
+	mips_pcibios_init();
+
+	/* Request I/O space for devices used on the Malta board. */
+	for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++)
+		request_resource(&ioport_resource, standard_io_resources+i);
+
+	/*
+	 * Enable DMA channel 4 (cascade channel) in the PIIX4 south bridge.
+	 */
+	enable_dma(4);
+
+#ifdef CONFIG_DMA_COHERENT
+	if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO)
+		panic("Hardware DMA cache coherency not supported");
+#endif
+
+	if (mips_revision_sconid == MIPS_REVISION_SCON_BONITO)
+		bonito_quirks_setup();
+
+#ifdef CONFIG_BLK_DEV_IDE
+	pci_clock_check();
+#endif
+
+#ifdef CONFIG_BLK_DEV_FD
+	fd_activate();
+#endif
+
+#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
+	screen_info_setup();
+#endif
+	mips_reboot_setup();
+
+	board_be_init = malta_be_init;
+	board_be_handler = malta_be_handler;
+}
diff --git a/arch/mips/mips-boards/malta/malta_smtc.c b/arch/mips/mti-malta/malta-smtc.c
index 5ea705e49454..5ea705e49454 100644
--- a/arch/mips/mips-boards/malta/malta_smtc.c
+++ b/arch/mips/mti-malta/malta-smtc.c
diff --git a/arch/mips/mti-malta/malta-time.c b/arch/mips/mti-malta/malta-time.c
new file mode 100644
index 000000000000..0b97d47691fc
--- /dev/null
+++ b/arch/mips/mti-malta/malta-time.c
@@ -0,0 +1,163 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ * Setting up the clock on the MIPS boards.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/timex.h>
+#include <linux/mc146818rtc.h>
+
+#include <asm/mipsregs.h>
+#include <asm/mipsmtregs.h>
+#include <asm/hardirq.h>
+#include <asm/i8253.h>
+#include <asm/irq.h>
+#include <asm/div64.h>
+#include <asm/cpu.h>
+#include <asm/time.h>
+#include <asm/mc146818-time.h>
+#include <asm/msc01_ic.h>
+
+#include <asm/mips-boards/generic.h>
+#include <asm/mips-boards/prom.h>
+
+#include <asm/mips-boards/maltaint.h>
+
+unsigned long cpu_khz;
+
+static int mips_cpu_timer_irq;
+static int mips_cpu_perf_irq;
+extern int cp0_perfcount_irq;
+
+static void mips_timer_dispatch(void)
+{
+	do_IRQ(mips_cpu_timer_irq);
+}
+
+static void mips_perf_dispatch(void)
+{
+	do_IRQ(mips_cpu_perf_irq);
+}
+
+/*
+ * Estimate CPU frequency.  Sets mips_hpt_frequency as a side-effect
+ */
+static unsigned int __init estimate_cpu_frequency(void)
+{
+	unsigned int prid = read_c0_prid() & 0xffff00;
+	unsigned int count;
+
+	unsigned long flags;
+	unsigned int start;
+
+	local_irq_save(flags);
+
+	/* Start counter exactly on falling edge of update flag */
+	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
+
+	/* Start r4k counter. */
+	start = read_c0_count();
+
+	/* Read counter exactly on falling edge of update flag */
+	while (CMOS_READ(RTC_REG_A) & RTC_UIP);
+	while (!(CMOS_READ(RTC_REG_A) & RTC_UIP));
+
+	count = read_c0_count() - start;
+
+	/* restore interrupts */
+	local_irq_restore(flags);
+
+	mips_hpt_frequency = count;
+	if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
+	    (prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
+		count *= 2;
+
+	count += 5000;    /* round */
+	count -= count%10000;
+
+	return count;
+}
+
+unsigned long read_persistent_clock(void)
+{
+	return mc146818_get_cmos_time();
+}
+
+static void __init plat_perf_setup(void)
+{
+#ifdef MSC01E_INT_BASE
+	if (cpu_has_veic) {
+		set_vi_handler(MSC01E_INT_PERFCTR, mips_perf_dispatch);
+		mips_cpu_perf_irq = MSC01E_INT_BASE + MSC01E_INT_PERFCTR;
+	} else
+#endif
+	if (cp0_perfcount_irq >= 0) {
+		if (cpu_has_vint)
+			set_vi_handler(cp0_perfcount_irq, mips_perf_dispatch);
+		mips_cpu_perf_irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq;
+#ifdef CONFIG_SMP
+		set_irq_handler(mips_cpu_perf_irq, handle_percpu_irq);
+#endif
+	}
+}
+
+unsigned int __cpuinit get_c0_compare_int(void)
+{
+#ifdef MSC01E_INT_BASE
+	if (cpu_has_veic) {
+		set_vi_handler(MSC01E_INT_CPUCTR, mips_timer_dispatch);
+		mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR;
+	} else
+#endif
+	{
+		if (cpu_has_vint)
+			set_vi_handler(cp0_compare_irq, mips_timer_dispatch);
+		mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq;
+	}
+
+	return mips_cpu_timer_irq;
+}
+
+void __init plat_time_init(void)
+{
+	unsigned int est_freq;
+
+        /* Set Data mode - binary. */
+        CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL);
+
+	est_freq = estimate_cpu_frequency();
+
+	printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
+	       (est_freq%1000000)*100/1000000);
+
+        cpu_khz = est_freq / 1000;
+
+	mips_scroll_message();
+#ifdef CONFIG_I8253		/* Only Malta has a PIT */
+	setup_pit_timer();
+#endif
+
+	plat_perf_setup();
+}
diff --git a/arch/mips/nxp/pnx8550/common/Makefile b/arch/mips/nxp/pnx8550/common/Makefile
index 31cc1a5cec3b..dd9e7b1f7fd3 100644
--- a/arch/mips/nxp/pnx8550/common/Makefile
+++ b/arch/mips/nxp/pnx8550/common/Makefile
@@ -24,6 +24,5 @@
 
 obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o
 obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_KGDB) += gdb_hook.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/nxp/pnx8550/common/gdb_hook.c b/arch/mips/nxp/pnx8550/common/gdb_hook.c
deleted file mode 100644
index ad4624f6d9bc..000000000000
--- a/arch/mips/nxp/pnx8550/common/gdb_hook.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * This is the interface to the remote debugger stub.
- *
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-#include <linux/serial_ip3106.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-#include <uart.h>
-
-static struct serial_state rs_table[IP3106_NR_PORTS] = {
-};
-static struct async_struct kdb_port_info = {0};
-
-void rs_kgdb_hook(int tty_no)
-{
-	struct serial_state *ser = &rs_table[tty_no];
-
-	kdb_port_info.state = ser;
-	kdb_port_info.magic = SERIAL_MAGIC;
-	kdb_port_info.port  = tty_no;
-	kdb_port_info.flags = ser->flags;
-
-	/*
-	 * Clear all interrupts
-	 */
-	/* Clear all the transmitter FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_TX_RST;
-	/* Clear all the receiver FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, tty_no) |= IP3106_UART_LCR_RX_RST;
-	/* Clear all interrupts */
-	ip3106_iclr(UART_BASE, tty_no) = IP3106_UART_INT_ALLRX |
-		IP3106_UART_INT_ALLTX;
-
-	/*
-	 * Now, initialize the UART
-	 */
-	ip3106_lcr(UART_BASE, tty_no) = IP3106_UART_LCR_8BIT;
-	ip3106_baud(UART_BASE, tty_no) = 5; // 38400 Baud
-}
-
-int putDebugChar(char c)
-{
-	/* Wait until FIFO not full */
-	while (((ip3106_fifo(UART_BASE, kdb_port_info.port) & IP3106_UART_FIFO_TXFIFO) >> 16) >= 16)
-		;
-	/* Send one char */
-	ip3106_fifo(UART_BASE, kdb_port_info.port) = c;
-
-	return 1;
-}
-
-char getDebugChar(void)
-{
-	char ch;
-
-	/* Wait until there is a char in the FIFO */
-	while (!((ip3106_fifo(UART_BASE, kdb_port_info.port) &
-					IP3106_UART_FIFO_RXFIFO) >> 8))
-		;
-	/* Read one char */
-	ch = ip3106_fifo(UART_BASE, kdb_port_info.port) &
-		IP3106_UART_FIFO_RBRTHR;
-	/* Advance the RX FIFO read pointer */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_NEXT;
-	return (ch);
-}
-
-void rs_disable_debug_interrupts(void)
-{
-	ip3106_ien(UART_BASE, kdb_port_info.port) = 0; /* Disable all interrupts */
-}
-
-void rs_enable_debug_interrupts(void)
-{
-	/* Clear all the transmitter FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_TX_RST;
-	/* Clear all the receiver FIFO counters (pointer and status) */
-	ip3106_lcr(UART_BASE, kdb_port_info.port) |= IP3106_UART_LCR_RX_RST;
-	/* Clear all interrupts */
-	ip3106_iclr(UART_BASE, kdb_port_info.port) = IP3106_UART_INT_ALLRX |
-		IP3106_UART_INT_ALLTX;
-	ip3106_ien(UART_BASE, kdb_port_info.port)  = IP3106_UART_INT_ALLRX; /* Enable RX interrupts */
-}
diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/nxp/pnx8550/common/int.c
index aad03429a5e3..f080f114a1bf 100644
--- a/arch/mips/nxp/pnx8550/common/int.c
+++ b/arch/mips/nxp/pnx8550/common/int.c
@@ -34,7 +34,6 @@
 #include <linux/module.h>
 
 #include <asm/io.h>
-#include <asm/gdb-stub.h>
 #include <int.h>
 #include <uart.h>
 
diff --git a/arch/mips/nxp/pnx8550/common/platform.c b/arch/mips/nxp/pnx8550/common/platform.c
index c7c763dbe588..21d2955359b3 100644
--- a/arch/mips/nxp/pnx8550/common/platform.c
+++ b/arch/mips/nxp/pnx8550/common/platform.c
@@ -13,6 +13,7 @@
  * warranty of any kind, whether express or implied.
  */
 #include <linux/device.h>
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/resource.h>
@@ -91,16 +92,16 @@ struct pnx8xxx_port pnx8xxx_ports[] = {
 };
 
 /* The dmamask must be set for OHCI to work */
-static u64 ohci_dmamask = ~(u32)0;
+static u64 ohci_dmamask = DMA_32BIT_MASK;
 
-static u64 uart_dmamask = ~(u32)0;
+static u64 uart_dmamask = DMA_32BIT_MASK;
 
 static struct platform_device pnx8550_usb_ohci_device = {
 	.name		= "pnx8550-ohci",
 	.id		= -1,
 	.dev = {
 		.dma_mask		= &ohci_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 	},
 	.num_resources	= ARRAY_SIZE(pnx8550_usb_ohci_resources),
 	.resource	= pnx8550_usb_ohci_resources,
@@ -111,7 +112,7 @@ static struct platform_device pnx8550_uart_device = {
 	.id		= -1,
 	.dev = {
 		.dma_mask		= &uart_dmamask,
-		.coherent_dma_mask	= 0xffffffff,
+		.coherent_dma_mask	= DMA_32BIT_MASK,
 		.platform_data = pnx8xxx_ports,
 	},
 	.num_resources	= ARRAY_SIZE(pnx8550_uart_resources),
diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c
index 18b125e3b65d..acf1fa889444 100644
--- a/arch/mips/nxp/pnx8550/common/proc.c
+++ b/arch/mips/nxp/pnx8550/common/proc.c
@@ -22,7 +22,6 @@
 #include <linux/random.h>
 
 #include <asm/io.h>
-#include <asm/gdb-stub.h>
 #include <int.h>
 #include <uart.h>
 
diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c
index 92d764c97701..2aed50fef10f 100644
--- a/arch/mips/nxp/pnx8550/common/setup.c
+++ b/arch/mips/nxp/pnx8550/common/setup.c
@@ -47,7 +47,6 @@ extern void pnx8550_machine_halt(void);
 extern void pnx8550_machine_power_off(void);
 extern struct resource ioport_resource;
 extern struct resource iomem_resource;
-extern void rs_kgdb_hook(int tty_no);
 extern char *prom_getcmdline(void);
 
 struct resource standard_io_resources[] = {
@@ -142,16 +141,5 @@ void __init plat_mem_setup(void)
 		ip3106_baud(UART_BASE, pnx8550_console_port) = 5;
 	}
 
-#ifdef CONFIG_KGDB
-	argptr = prom_getcmdline();
-	if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
-		int line;
-		argptr += strlen("kgdb=ttyS");
-		line = *argptr == '0' ? 0 : 1;
-		rs_kgdb_hook(line);
-		pr_info("KGDB: Using ttyS%i for session, "
-		        "please connect your debugger\n", line ? 1 : 0);
-	}
-#endif
 	return;
 }
diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c
index b5f6f71b27bc..dd2fbd6645c1 100644
--- a/arch/mips/oprofile/common.c
+++ b/arch/mips/oprofile/common.c
@@ -27,7 +27,7 @@ static int op_mips_setup(void)
 	model->reg_setup(ctr);
 
 	/* Configure the registers on all cpus.  */
-	on_each_cpu(model->cpu_setup, NULL, 0, 1);
+	on_each_cpu(model->cpu_setup, NULL, 1);
 
         return 0;
 }
@@ -58,7 +58,7 @@ static int op_mips_create_files(struct super_block * sb, struct dentry * root)
 
 static int op_mips_start(void)
 {
-	on_each_cpu(model->cpu_start, NULL, 0, 1);
+	on_each_cpu(model->cpu_start, NULL, 1);
 
 	return 0;
 }
@@ -66,7 +66,7 @@ static int op_mips_start(void)
 static void op_mips_stop(void)
 {
 	/* Disable performance monitoring for all counters.  */
-	on_each_cpu(model->cpu_stop, NULL, 0, 1);
+	on_each_cpu(model->cpu_stop, NULL, 1);
 }
 
 int __init oprofile_arch_init(struct oprofile_operations *ops)
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index b40df7d2cf44..54759f1669d3 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -313,7 +313,7 @@ static int __init mipsxx_init(void)
 	if (!cpu_has_mipsmt_pertccounters)
 		counters = counters_total_to_per_cpu(counters);
 #endif
-	on_each_cpu(reset_counters, (void *)(long)counters, 0, 1);
+	on_each_cpu(reset_counters, (void *)(long)counters, 1);
 
 	op_model_mipsxx_ops.num_counters = counters;
 	switch (current_cpu_type()) {
@@ -382,7 +382,7 @@ static void mipsxx_exit(void)
 	int counters = op_model_mipsxx_ops.num_counters;
 
 	counters = counters_per_cpu_to_total(counters);
-	on_each_cpu(reset_counters, (void *)(long)counters, 0, 1);
+	on_each_cpu(reset_counters, (void *)(long)counters, 1);
 
 	perf_irq = save_perf_irq;
 }
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index ed0c07622baa..15e01aec37fd 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -11,17 +11,16 @@ obj-$(CONFIG_MIPS_BONITO64)	+= ops-bonito64.o
 obj-$(CONFIG_PCI_GT64XXX_PCI0)	+= ops-gt64xxx_pci0.o
 obj-$(CONFIG_MIPS_MSC)		+= ops-msc.o
 obj-$(CONFIG_MIPS_NILE4)	+= ops-nile4.o
-obj-$(CONFIG_MIPS_TX3927)	+= ops-tx3927.o
+obj-$(CONFIG_SOC_TX3927)	+= ops-tx3927.o
 obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
-obj-$(CONFIG_NEC_CMBVR4133)	+= fixup-vr4133.o
 obj-$(CONFIG_MARKEINS)		+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
+obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
 
 #
 # These are still pretty much in the old state, watch, go blind.
 #
 obj-$(CONFIG_BASLER_EXCITE)	+= ops-titan.o pci-excite.o fixup-excite.o
 obj-$(CONFIG_LASAT)		+= pci-lasat.o
-obj-$(CONFIG_MIPS_ATLAS)	+= fixup-atlas.o
 obj-$(CONFIG_MIPS_COBALT)	+= fixup-cobalt.o
 obj-$(CONFIG_SOC_AU1500)	+= fixup-au1000.o ops-au1000.o
 obj-$(CONFIG_SOC_AU1550)	+= fixup-au1000.o ops-au1000.o
@@ -42,9 +41,12 @@ obj-$(CONFIG_SNI_RM)		+= fixup-sni.o ops-sni.o
 obj-$(CONFIG_TANBAC_TB0219)	+= fixup-tb0219.o
 obj-$(CONFIG_TANBAC_TB0226)	+= fixup-tb0226.o
 obj-$(CONFIG_TANBAC_TB0287)	+= fixup-tb0287.o
-obj-$(CONFIG_TOSHIBA_JMR3927)	+= fixup-jmr3927.o pci-jmr3927.o
-obj-$(CONFIG_TOSHIBA_RBTX4927)	+= fixup-rbtx4927.o ops-tx4927.o
-obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-tx4938.o ops-tx4938.o
+obj-$(CONFIG_TOSHIBA_JMR3927)	+= fixup-jmr3927.o
+obj-$(CONFIG_SOC_TX4927)	+= pci-tx4927.o
+obj-$(CONFIG_SOC_TX4938)	+= pci-tx4938.o
+obj-$(CONFIG_TOSHIBA_RBTX4927)	+= fixup-rbtx4927.o
+obj-$(CONFIG_TOSHIBA_RBTX4938)	+= fixup-rbtx4938.o
 obj-$(CONFIG_VICTOR_MPC30X)	+= fixup-mpc30x.o
 obj-$(CONFIG_ZAO_CAPCELLA)	+= fixup-capcella.o
 obj-$(CONFIG_WR_PPMC)		+= fixup-wrppmc.o
+obj-$(CONFIG_MIKROTIK_RB532)	+= pci-rc32434.o ops-rc32434.o fixup-rc32434.o
diff --git a/arch/mips/pci/fixup-atlas.c b/arch/mips/pci/fixup-atlas.c
deleted file mode 100644
index 506e883a8c71..000000000000
--- a/arch/mips/pci/fixup-atlas.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (C) 2003, 2004  Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2005  MIPS Technologies, Inc.  All rights reserved.
- *	Author:	 Maciej W. Rozycki <macro@mips.com>
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/mips-boards/atlasint.h>
-
-#define PCIA		ATLAS_INT_PCIA
-#define PCIB		ATLAS_INT_PCIB
-#define PCIC		ATLAS_INT_PCIC
-#define PCID		ATLAS_INT_PCID
-#define INTA		ATLAS_INT_INTA
-#define INTB		ATLAS_INT_INTB
-#define ETH		ATLAS_INT_ETH
-#define INTC		ATLAS_INT_INTC
-#define SCSI		ATLAS_INT_SCSI
-#define INTD		ATLAS_INT_INTD
-
-static char irq_tab[][5] __initdata = {
-	/*      INTA    INTB    INTC    INTD */
-	{0,	0,	0,	0,	0 },	/*  0: Unused */
-	{0,	0,	0,	0,	0 },	/*  1: Unused */
-	{0,	0,	0,	0,	0 },	/*  2: Unused */
-	{0,	0,	0,	0,	0 },	/*  3: Unused */
-	{0,	0,	0,	0,	0 },	/*  4: Unused */
-	{0,	0,	0,	0,	0 },	/*  5: Unused */
-	{0,	0,	0,	0,	0 },	/*  6: Unused */
-	{0,	0,	0,	0,	0 },	/*  7: Unused */
-	{0,	0,	0,	0,	0 },	/*  8: Unused */
-	{0,	0,	0,	0,	0 },	/*  9: Unused */
-	{0,	0,	0,	0,	0 },	/* 10: Unused */
-	{0,	0,	0,	0,	0 },	/* 11: Unused */
-	{0,	0,	0,	0,	0 },	/* 12: Unused */
-	{0,	0,	0,	0,	0 },	/* 13: Unused */
-	{0,	0,	0,	0,	0 },	/* 14: Unused */
-	{0,	PCIA,	PCIB,	PCIC,	PCID },	/* 15: cPCI (behind 21150) */
-	{0,	SCSI,	0,	0,	0 },	/* 16: SYM53C810A SCSI */
-	{0,	0,	0,	0,	0 },	/* 17: Core */
-	{0,	INTA,	INTB,	INTC,	INTD },	/* 18: PCI Slot */
-	{0,	ETH,	0,	0,	0 },	/* 19: SAA9730 Eth. et al. */
-	{0,	0,	0,	0,	0 },	/* 20: Unused */
-	{0,	0,	0,	0,	0 }	/* 21: Unused */
-};
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	return irq_tab[slot][pin];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
-
-#ifdef CONFIG_KGDB
-/*
- * The PCI scan may have moved the saa9730 I/O address, so reread
- * the address here.
- * This does mean that it's not possible to debug the PCI bus configuration
- * code, but it is better than nothing...
- */
-
-static void atlas_saa9730_base_fixup(struct pci_dev *pdev)
-{
-	extern void *saa9730_base;
-	if (pdev->bus == 0 && PCI_SLOT(pdev->devfn) == 19)
-		(void) pci_read_config_dword(pdev, 0x14, (u32 *)&saa9730_base);
-	printk("saa9730_base = %x\n", saa9730_base);
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA9730,
-	 atlas_saa9730_base_fixup);
-
-#endif
diff --git a/arch/mips/pci/fixup-jmr3927.c b/arch/mips/pci/fixup-jmr3927.c
index e974394be7bc..0f1069527cba 100644
--- a/arch/mips/pci/fixup-jmr3927.c
+++ b/arch/mips/pci/fixup-jmr3927.c
@@ -28,36 +28,31 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/init.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/jmr3927.h>
 
-#include <asm/jmr3927/jmr3927.h>
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+int __init jmr3927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	unsigned char irq = pin;
 
-	/* SMSC SLC90E66 IDE uses irq 14, 15 (default) */
-	if (dev->vendor == PCI_VENDOR_ID_EFAR &&
-	    dev->device == PCI_DEVICE_ID_EFAR_SLC90E66_1)
-		return irq;
 	/* IRQ rotation (PICMG) */
 	irq--;			/* 0-3 */
-	if (dev->bus->parent == NULL &&
-	    slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(23)) {
+	if (slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(23)) {
 		/* PCI CardSlot (IDSEL=A23, DevNu=12) */
 		/* PCIA => PCIC (IDSEL=A23) */
 		/* NOTE: JMR3927 JP1 must be set to OPEN */
 		irq = (irq + 2) % 4;
-	} else if (dev->bus->parent == NULL &&
-		   slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(22)) {
+	} else if (slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(22)) {
 		/* PCI CardSlot (IDSEL=A22, DevNu=11) */
 		/* PCIA => PCIA (IDSEL=A22) */
 		/* NOTE: JMR3927 JP1 must be set to OPEN */
 		irq = (irq + 0) % 4;
 	} else {
 		/* PCI Backplane */
-		irq = (irq + 3 + slot) % 4;
+		if (txx9_pci_option & TXX9_PCI_OPT_PICMG)
+			irq = (irq + 33 - slot) % 4;
+		else
+			irq = (irq + 3 + slot) % 4;
 	}
 	irq++;			/* 1-4 */
 
@@ -66,15 +61,13 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 		irq = JMR3927_IRQ_IOC_PCIA;
 		break;
 	case 2:
-		// wrong for backplane irq = JMR3927_IRQ_IOC_PCIB;
-		irq = JMR3927_IRQ_IOC_PCID;
+		irq = JMR3927_IRQ_IOC_PCIB;
 		break;
 	case 3:
 		irq = JMR3927_IRQ_IOC_PCIC;
 		break;
 	case 4:
-		// wrong for backplane irq = JMR3927_IRQ_IOC_PCID;
-		irq = JMR3927_IRQ_IOC_PCIB;
+		irq = JMR3927_IRQ_IOC_PCID;
 		break;
 	}
 
@@ -84,9 +77,3 @@ int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 		irq = JMR3927_IRQ_ETHER0;
 	return irq;
 }
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
diff --git a/arch/mips/pci/fixup-rbtx4927.c b/arch/mips/pci/fixup-rbtx4927.c
index 7450c335b387..321db265829c 100644
--- a/arch/mips/pci/fixup-rbtx4927.c
+++ b/arch/mips/pci/fixup-rbtx4927.c
@@ -33,108 +33,41 @@
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/rbtx4927.h>
 
-#include <asm/tx4927/tx4927.h>
-#include <asm/tx4927/tx4927_pci.h>
-
-#undef  DEBUG
-#ifdef  DEBUG
-#define DBG(x...)       printk(x)
-#else
-#define DBG(x...)
-#endif
-
-/* look up table for backplane pci irq for slots 17-20 by pin # */
-static unsigned char backplane_pci_irq[4][4] = {
-	/* PJ6 SLOT:  17, PIN: 1 */ {TX4927_IRQ_IOC_PCIA,
-				     /* PJ6 SLOT:  17, PIN: 2 */
-				     TX4927_IRQ_IOC_PCIB,
-				     /* PJ6 SLOT:  17, PIN: 3 */
-				     TX4927_IRQ_IOC_PCIC,
-				     /* PJ6 SLOT:  17, PIN: 4 */
-				     TX4927_IRQ_IOC_PCID},
-	/* SB  SLOT:  18, PIN: 1 */ {TX4927_IRQ_IOC_PCIB,
-				     /* SB  SLOT:  18, PIN: 2 */
-				     TX4927_IRQ_IOC_PCIC,
-				     /* SB  SLOT:  18, PIN: 3 */
-				     TX4927_IRQ_IOC_PCID,
-				     /* SB  SLOT:  18, PIN: 4 */
-				     TX4927_IRQ_IOC_PCIA},
-	/* PJ5 SLOT:  19, PIN: 1 */ {TX4927_IRQ_IOC_PCIC,
-				     /* PJ5 SLOT:  19, PIN: 2 */
-				     TX4927_IRQ_IOC_PCID,
-				     /* PJ5 SLOT:  19, PIN: 3 */
-				     TX4927_IRQ_IOC_PCIA,
-				     /* PJ5 SLOT:  19, PIN: 4 */
-				     TX4927_IRQ_IOC_PCIB},
-	/* PJ4 SLOT:  20, PIN: 1 */ {TX4927_IRQ_IOC_PCID,
-				     /* PJ4 SLOT:  20, PIN: 2 */
-				     TX4927_IRQ_IOC_PCIA,
-				     /* PJ4 SLOT:  20, PIN: 3 */
-				     TX4927_IRQ_IOC_PCIB,
-				     /* PJ4 SLOT:  20, PIN: 4 */
-				     TX4927_IRQ_IOC_PCIC}
-};
-
-static int pci_get_irq(const struct pci_dev *dev, int pin)
+int __init rbtx4927_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	unsigned char irq = pin;
 
-	DBG("pci_get_irq: pin is %d\n", pin);
 	/* IRQ rotation */
 	irq--;			/* 0-3 */
-	if (dev->bus->parent == NULL &&
-	    PCI_SLOT(dev->devfn) == TX4927_PCIC_IDSEL_AD_TO_SLOT(23)) {
-		printk("Onboard PCI_SLOT(dev->devfn) is %d\n",
-		       PCI_SLOT(dev->devfn));
-		/* IDSEL=A23 is tx4927 onboard pci slot */
-		irq = (irq + PCI_SLOT(dev->devfn)) % 4;
-		irq++;		/* 1-4 */
-		DBG("irq is now %d\n", irq);
-
-		switch (irq) {
-		case 1:
-			irq = TX4927_IRQ_IOC_PCIA;
-			break;
-		case 2:
-			irq = TX4927_IRQ_IOC_PCIB;
-			break;
-		case 3:
-			irq = TX4927_IRQ_IOC_PCIC;
-			break;
-		case 4:
-			irq = TX4927_IRQ_IOC_PCID;
-			break;
-		}
+	if (slot == TX4927_PCIC_IDSEL_AD_TO_SLOT(23)) {
+		/* PCI CardSlot (IDSEL=A23) */
+		/* PCIA => PCIA */
+		irq = (irq + 0 + slot) % 4;
 	} else {
 		/* PCI Backplane */
-		DBG("PCI Backplane PCI_SLOT(dev->devfn) is %d\n",
-		    PCI_SLOT(dev->devfn));
-		irq = backplane_pci_irq[PCI_SLOT(dev->devfn) - 17][irq];
+		if (txx9_pci_option & TXX9_PCI_OPT_PICMG)
+			irq = (irq + 33 - slot) % 4;
+		else
+			irq = (irq + 3 + slot) % 4;
 	}
-	DBG("assigned irq %d\n", irq);
-	return irq;
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	unsigned char irq;
-
-	printk("PCI Setup for pin %d \n", pin);
-
-	if (dev->device == 0x9130) /* IDE */
-		irq = 14;
-	else
-		irq = pci_get_irq(dev, pin);
+	irq++;	/* 1-4 */
 
+	switch (irq) {
+	case 1:
+		irq = RBTX4927_IRQ_IOC_PCIA;
+		break;
+	case 2:
+		irq = RBTX4927_IRQ_IOC_PCIB;
+		break;
+	case 3:
+		irq = RBTX4927_IRQ_IOC_PCIC;
+		break;
+	case 4:
+		irq = RBTX4927_IRQ_IOC_PCID;
+		break;
+	}
 	return irq;
 }
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
diff --git a/arch/mips/pci/fixup-rbtx4938.c b/arch/mips/pci/fixup-rbtx4938.c
new file mode 100644
index 000000000000..a80579af609b
--- /dev/null
+++ b/arch/mips/pci/fixup-rbtx4938.c
@@ -0,0 +1,53 @@
+/*
+ * Toshiba rbtx4938 pci routines
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/types.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/rbtx4938.h>
+
+int __init rbtx4938_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq = tx4938_pcic1_map_irq(dev, slot);
+
+	if (irq >= 0)
+		return irq;
+	irq = pin;
+	/* IRQ rotation */
+	irq--;	/* 0-3 */
+	if (slot == TX4927_PCIC_IDSEL_AD_TO_SLOT(23)) {
+		/* PCI CardSlot (IDSEL=A23) */
+		/* PCIA => PCIA (IDSEL=A23) */
+		irq = (irq + 0 + slot) % 4;
+	} else {
+		/* PCI Backplane */
+		if (txx9_pci_option & TXX9_PCI_OPT_PICMG)
+			irq = (irq + 33 - slot) % 4;
+		else
+			irq = (irq + 3 + slot) % 4;
+	}
+	irq++;	/* 1-4 */
+
+	switch (irq) {
+	case 1:
+		irq = RBTX4938_IRQ_IOC_PCIA;
+		break;
+	case 2:
+		irq = RBTX4938_IRQ_IOC_PCIB;
+		break;
+	case 3:
+		irq = RBTX4938_IRQ_IOC_PCIC;
+		break;
+	case 4:
+		irq = RBTX4938_IRQ_IOC_PCID;
+		break;
+	}
+	return irq;
+}
diff --git a/arch/mips/pci/fixup-rc32434.c b/arch/mips/pci/fixup-rc32434.c
new file mode 100644
index 000000000000..75b90dcb7a09
--- /dev/null
+++ b/arch/mips/pci/fixup-rc32434.c
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	stevel@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+
+static int __devinitdata irq_map[2][12] = {
+	{0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1},
+	{0, 0, 1, 3, 0, 2, 1, 3, 0, 2, 1, 3}
+};
+
+int __devinit pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq = 0;
+
+	if (dev->bus->number < 2 && PCI_SLOT(dev->devfn) < 12)
+		irq = irq_map[dev->bus->number][PCI_SLOT(dev->devfn)];
+
+	return irq + GROUP4_IRQ_BASE + 4;
+}
+
+static void rc32434_pci_early_fixup(struct pci_dev *dev)
+{
+	if (PCI_SLOT(dev->devfn) == 6 && dev->bus->number == 0) {
+		/* disable prefetched memory range */
+		pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0);
+		pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x10);
+
+		pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4);
+	}
+}
+
+/*
+ * The fixup applies to both the IDT and VIA devices present on the board
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, rc32434_pci_early_fixup);
+
+/* Do platform specific device initialization at pci_enable_device() time */
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
diff --git a/arch/mips/pci/fixup-tx4938.c b/arch/mips/pci/fixup-tx4938.c
deleted file mode 100644
index f2ba06ee0c10..000000000000
--- a/arch/mips/pci/fixup-tx4938.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Toshiba rbtx4938 pci routines
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/tx4938/rbtx4938.h>
-
-extern struct pci_controller tx4938_pci_controller[];
-
-static int pci_get_irq(const struct pci_dev *dev, int pin)
-{
-	int irq = pin;
-	u8 slot = PCI_SLOT(dev->devfn);
-	struct pci_controller *controller = (struct pci_controller *)dev->sysdata;
-
-	if (controller == &tx4938_pci_controller[1]) {
-		/* TX4938 PCIC1 */
-		switch (slot) {
-		case TX4938_PCIC_IDSEL_AD_TO_SLOT(31):
-			if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH0_SEL)
-				return RBTX4938_IRQ_IRC + TX4938_IR_ETH0;
-			break;
-		case TX4938_PCIC_IDSEL_AD_TO_SLOT(30):
-			if (tx4938_ccfgptr->pcfg & TX4938_PCFG_ETH1_SEL)
-				return RBTX4938_IRQ_IRC + TX4938_IR_ETH1;
-			break;
-		}
-		return 0;
-	}
-
-	/* IRQ rotation */
-	irq--;	/* 0-3 */
-	if (dev->bus->parent == NULL &&
-	    (slot == TX4938_PCIC_IDSEL_AD_TO_SLOT(23))) {
-		/* PCI CardSlot (IDSEL=A23) */
-		/* PCIA => PCIA (IDSEL=A23) */
-		irq = (irq + 0 + slot) % 4;
-	} else {
-		/* PCI Backplane */
-		irq = (irq + 33 - slot) % 4;
-	}
-	irq++;	/* 1-4 */
-
-	switch (irq) {
-	case 1:
-		irq = RBTX4938_IRQ_IOC_PCIA;
-		break;
-	case 2:
-		irq = RBTX4938_IRQ_IOC_PCIB;
-		break;
-	case 3:
-		irq = RBTX4938_IRQ_IOC_PCIC;
-		break;
-	case 4:
-		irq = RBTX4938_IRQ_IOC_PCID;
-		break;
-	}
-	return irq;
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	unsigned char irq = 0;
-
-	irq = pci_get_irq(dev, pin);
-
-	printk(KERN_INFO "PCI: 0x%02x:0x%02x(0x%02x,0x%02x) IRQ=%d\n",
-	       dev->bus->number, dev->devfn, PCI_SLOT(dev->devfn),
-	       PCI_FUNC(dev->devfn), irq);
-
-	return irq;
-}
-
-/*
- * Do platform specific device initialization at pci_enable_device() time
- */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	return 0;
-}
-
diff --git a/arch/mips/pci/fixup-vr4133.c b/arch/mips/pci/fixup-vr4133.c
deleted file mode 100644
index de5e5f6bbf4c..000000000000
--- a/arch/mips/pci/fixup-vr4133.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * arch/mips/pci/fixup-vr4133.c
- *
- * The NEC CMB-VR4133 Board specific PCI fixups.
- *
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
- *         Alex Sapkov <asapkov@ru.mvista.com>
- *
- * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Modified for support in 2.6
- * Author: Manish Lachwani (mlachwani@mvista.com)
- *
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-
-#include <asm/io.h>
-#include <asm/i8259.h>
-#include <asm/vr41xx/cmbvr4133.h>
-
-extern int vr4133_rockhopper;
-extern void ali_m1535plus_init(struct pci_dev *dev);
-extern void ali_m5229_init(struct pci_dev *dev);
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-	/*
-	 * We have to reset AMD PCnet adapter on Rockhopper since
-	 * PMON leaves it enabled and generating interrupts. This leads
-	 * to a lock if some PCI device driver later enables the IRQ line
-	 * shared with PCnet and there is no AMD PCnet driver to catch its
-	 * interrupts.
-	 */
-#ifdef CONFIG_ROCKHOPPER
-	if (dev->vendor == PCI_VENDOR_ID_AMD &&
-		dev->device == PCI_DEVICE_ID_AMD_LANCE) {
-		inl(pci_resource_start(dev, 0) + 0x18);
-	}
-#endif
-
-	/*
-	 * we have to open the bridges' windows down to 0 because otherwise
-	 * we cannot access ISA south bridge I/O registers that get mapped from
-	 * 0. for example, 8259 PIC would be unaccessible without that
-	 */
-	if(dev->vendor == PCI_VENDOR_ID_INTEL && dev->device == PCI_DEVICE_ID_INTEL_S21152BB) {
-		pci_write_config_byte(dev, PCI_IO_BASE, 0);
-		if(dev->bus->number == 0) {
-			pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 0);
-		} else {
-			pci_write_config_word(dev, PCI_IO_BASE_UPPER16, 1);
-		}
-	}
-
-	return 0;
-}
-
-/*
- * M1535 IRQ mapping
- * Feel free to change this, although it shouldn't be needed
- */
-#define M1535_IRQ_INTA  7
-#define M1535_IRQ_INTB  9
-#define M1535_IRQ_INTC  10
-#define M1535_IRQ_INTD  11
-
-#define M1535_IRQ_USB   9
-#define M1535_IRQ_IDE   14
-#define M1535_IRQ_IDE2  15
-#define M1535_IRQ_PS2   12
-#define M1535_IRQ_RTC   8
-#define M1535_IRQ_FDC   6
-#define M1535_IRQ_AUDIO 5
-#define M1535_IRQ_COM1  4
-#define M1535_IRQ_COM2  4
-#define M1535_IRQ_IRDA  3
-#define M1535_IRQ_KBD   1
-#define M1535_IRQ_TMR   0
-
-/* Rockhopper "slots" assignment; this is hard-coded ... */
-#define ROCKHOPPER_M5451_SLOT  1
-#define ROCKHOPPER_M1535_SLOT  2
-#define ROCKHOPPER_M5229_SLOT  11
-#define ROCKHOPPER_M5237_SLOT  15
-#define ROCKHOPPER_PMU_SLOT    12
-/* ... and hard-wired. */
-#define ROCKHOPPER_PCI1_SLOT   3
-#define ROCKHOPPER_PCI2_SLOT   4
-#define ROCKHOPPER_PCI3_SLOT   5
-#define ROCKHOPPER_PCI4_SLOT   6
-#define ROCKHOPPER_PCNET_SLOT  1
-
-#define M1535_IRQ_MASK(n) (1 << (n))
-
-#define M1535_IRQ_EDGE  (M1535_IRQ_MASK(M1535_IRQ_TMR)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_KBD)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_COM1) | \
-                         M1535_IRQ_MASK(M1535_IRQ_COM2) | \
-                         M1535_IRQ_MASK(M1535_IRQ_IRDA) | \
-                         M1535_IRQ_MASK(M1535_IRQ_RTC)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_FDC)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_PS2))
-
-#define M1535_IRQ_LEVEL (M1535_IRQ_MASK(M1535_IRQ_IDE)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_USB)  | \
-                         M1535_IRQ_MASK(M1535_IRQ_INTA) | \
-                         M1535_IRQ_MASK(M1535_IRQ_INTB) | \
-                         M1535_IRQ_MASK(M1535_IRQ_INTC) | \
-                         M1535_IRQ_MASK(M1535_IRQ_INTD))
-
-struct irq_map_entry {
-	u16 bus;
-	u8 slot;
-	u8 irq;
-};
-static struct irq_map_entry int_map[] = {
-	{1, ROCKHOPPER_M5451_SLOT, M1535_IRQ_AUDIO},	/* Audio controller */
-	{1, ROCKHOPPER_PCI1_SLOT, M1535_IRQ_INTD},	/* PCI slot #1 */
-	{1, ROCKHOPPER_PCI2_SLOT, M1535_IRQ_INTC},	/* PCI slot #2 */
-	{1, ROCKHOPPER_M5237_SLOT, M1535_IRQ_USB},	/* USB host controller */
-	{1, ROCKHOPPER_M5229_SLOT, IDE_PRIMARY_IRQ},	/* IDE controller */
-	{2, ROCKHOPPER_PCNET_SLOT, M1535_IRQ_INTD},	/* AMD Am79c973 on-board
-							   ethernet */
-	{2, ROCKHOPPER_PCI3_SLOT, M1535_IRQ_INTB},	/* PCI slot #3 */
-	{2, ROCKHOPPER_PCI4_SLOT, M1535_IRQ_INTC}	/* PCI slot #4 */
-};
-
-static int pci_intlines[] =
-    { M1535_IRQ_INTA, M1535_IRQ_INTB, M1535_IRQ_INTC, M1535_IRQ_INTD };
-
-/* Determine the Rockhopper IRQ line number for the PCI device */
-int rockhopper_get_irq(struct pci_dev *dev, u8 pin, u8 slot)
-{
-	struct pci_bus *bus;
-	int i;
-
-	bus = dev->bus;
-	if (bus == NULL)
-		return -1;
-
-	for (i = 0; i < ARRAY_SIZE(int_map); i++) {
-		if (int_map[i].bus == bus->number && int_map[i].slot == slot) {
-			int line;
-			for (line = 0; line < 4; line++)
-				if (pci_intlines[line] == int_map[i].irq)
-					break;
-			if (line < 4)
-				return pci_intlines[(line + (pin - 1)) % 4];
-			else
-				return int_map[i].irq;
-		}
-	}
-	return -1;
-}
-
-#ifdef CONFIG_ROCKHOPPER
-void i8259_init(void)
-{
-	init_i8259_irqs();
-
-	outb(0x00, 0x4d0);
-	outb(0x02, 0x4d1);	/* USB IRQ9 is level */
-}
-#endif
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-	extern int pci_probe_only;
-	pci_probe_only = 1;
-
-#ifdef CONFIG_ROCKHOPPER
-	if( dev->bus->number == 1 && vr4133_rockhopper )  {
-		if(slot == ROCKHOPPER_PCI1_SLOT || slot == ROCKHOPPER_PCI2_SLOT)
-			dev->irq = CMBVR41XX_INTA_IRQ;
-		else
-			dev->irq = rockhopper_get_irq(dev, pin, slot);
-	} else
-		dev->irq = CMBVR41XX_INTA_IRQ;
-#else
-	dev->irq = CMBVR41XX_INTA_IRQ;
-#endif
-
-	return dev->irq;
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, ali_m1535plus_init);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M5229, ali_m5229_init);
-
-
diff --git a/arch/mips/pci/ops-mace.c b/arch/mips/pci/ops-mace.c
index e95881897ec9..1cfb5588699f 100644
--- a/arch/mips/pci/ops-mace.c
+++ b/arch/mips/pci/ops-mace.c
@@ -61,6 +61,13 @@ mace_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	/* ack possible master abort */
 	mace->pci.error &= ~MACEPCI_ERROR_MASTER_ABORT;
 	mace->pci.control = control;
+	/*
+	 * someone forgot to set the ultra bit for the onboard
+	 * scsi chips; we fake it here
+	 */
+	if (bus->number == 0 && reg == 0x40 && size == 4 &&
+	    (devfn == (1 << 3) || devfn == (2 << 3)))
+		*val |= 0x1000;
 
 	DPRINTK("read%d: reg=%08x,val=%02x\n", size * 8, reg, *val);
 
diff --git a/arch/mips/pci/ops-rc32434.c b/arch/mips/pci/ops-rc32434.c
new file mode 100644
index 000000000000..d1f8fa210ca1
--- /dev/null
+++ b/arch/mips/pci/ops-rc32434.c
@@ -0,0 +1,207 @@
+/*
+ *  BRIEF MODULE DESCRIPTION
+ *     pci_ops for IDT EB434 board
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *  Copyright 2006 Felix Fietkau <nbd@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/pci.h>
+#include <linux/types.h>
+
+#include <asm/cpu.h>
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/pci.h>
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+
+#define PCI_CFG_SET(bus, slot, func, off) \
+	(rc32434_pci->pcicfga = (0x80000000 | \
+				((bus) << 16) | ((slot)<<11) | \
+				((func)<<8) | (off)))
+
+static inline int config_access(unsigned char access_type,
+				struct pci_bus *bus, unsigned int devfn,
+				unsigned char where, u32 *data)
+{
+	unsigned int slot = PCI_SLOT(devfn);
+	u8 func = PCI_FUNC(devfn);
+
+	/* Setup address */
+	PCI_CFG_SET(bus->number, slot, func, where);
+	rc32434_sync();
+
+	if (access_type == PCI_ACCESS_WRITE)
+		rc32434_pci->pcicfgd = *data;
+	else
+		*data = rc32434_pci->pcicfgd;
+
+	rc32434_sync();
+
+	return 0;
+}
+
+
+/*
+ * We can't address 8 and 16 bit words directly.  Instead we have to
+ * read/write a 32bit word and mask/modify the data we actually want.
+ */
+static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
+			    int where, u8 *val)
+{
+	u32 data;
+	int ret;
+
+	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+	*val = (data >> ((where & 3) << 3)) & 0xff;
+	return ret;
+}
+
+static int read_config_word(struct pci_bus *bus, unsigned int devfn,
+			    int where, u16 *val)
+{
+	u32 data;
+	int ret;
+
+	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
+	*val = (data >> ((where & 3) << 3)) & 0xffff;
+	return ret;
+}
+
+static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
+			     int where, u32 *val)
+{
+	int ret;
+	int delay = 1;
+
+	/*
+	 * Don't scan too far, else there will be errors with plugged in
+	 * daughterboard (rb564).
+	 */
+	if (bus->number == 0 && PCI_SLOT(devfn) > 21)
+		return 0;
+
+retry:
+	ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val);
+
+	/*
+	 * Certain devices react delayed at device scan time, this
+	 * gives them time to settle
+	 */
+	if (where == PCI_VENDOR_ID) {
+		if (ret == 0xffffffff || ret == 0x00000000 ||
+		    ret == 0x0000ffff || ret == 0xffff0000) {
+			if (delay > 4)
+				return 0;
+			delay *= 2;
+			msleep(delay);
+			goto retry;
+		}
+	}
+
+	return ret;
+}
+
+static int
+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
+		  u8 val)
+{
+	u32 data = 0;
+
+	if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+		return -1;
+
+	data = (data & ~(0xff << ((where & 3) << 3))) |
+	    (val << ((where & 3) << 3));
+
+	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+		return -1;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int
+write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
+		  u16 val)
+{
+	u32 data = 0;
+
+	if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+		return -1;
+
+	data = (data & ~(0xffff << ((where & 3) << 3))) |
+	    (val << ((where & 3) << 3));
+
+	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+		return -1;
+
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+
+static int
+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
+		   u32 val)
+{
+	if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
+		return -1;
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int pci_config_read(struct pci_bus *bus, unsigned int devfn,
+			   int where, int size, u32 *val)
+{
+	switch (size) {
+	case 1:
+		return read_config_byte(bus, devfn, where, (u8 *) val);
+	case 2:
+		return read_config_word(bus, devfn, where, (u16 *) val);
+	default:
+		return read_config_dword(bus, devfn, where, val);
+	}
+}
+
+static int pci_config_write(struct pci_bus *bus, unsigned int devfn,
+			    int where, int size, u32 val)
+{
+	switch (size) {
+	case 1:
+		return write_config_byte(bus, devfn, where, (u8) val);
+	case 2:
+		return write_config_word(bus, devfn, where, (u16) val);
+	default:
+		return write_config_dword(bus, devfn, where, val);
+	}
+}
+
+struct pci_ops rc32434_pci_ops = {
+	.read = pci_config_read,
+	.write = pci_config_write,
+};
diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c
index aa698bd0d5e3..31c150196595 100644
--- a/arch/mips/pci/ops-tx3927.c
+++ b/arch/mips/pci/ops-tx3927.c
@@ -8,7 +8,7 @@
  *
  * Based on arch/mips/ddb5xxx/ddb5477/pci_ops.c
  *
- *     Define the pci_ops for JMR3927.
+ *     Define the pci_ops for TX3927.
  *
  * Much of the code is derived from the original DDB5074 port by
  * Geert Uytterhoeven <geert@sonycom.com>
@@ -37,45 +37,48 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/interrupt.h>
 
 #include <asm/addrspace.h>
-#include <asm/jmr3927/jmr3927.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/tx3927.h>
 
-static inline int mkaddr(unsigned char bus, unsigned char dev_fn,
-	unsigned char where)
+static int mkaddr(struct pci_bus *bus, unsigned char devfn, unsigned char where)
 {
-	if (bus == 0 && dev_fn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	tx3927_pcicptr->ica = ((bus & 0xff) << 0x10) |
-	                      ((dev_fn & 0xff) << 0x08) |
-	                      (where & 0xfc);
+	if (bus->parent == NULL &&
+	    devfn >= PCI_DEVFN(TX3927_PCIC_MAX_DEVNU, 0))
+		return -1;
+	tx3927_pcicptr->ica =
+		((bus->number & 0xff) << 0x10) |
+		((devfn & 0xff) << 0x08) |
+		(where & 0xfc) | (bus->parent ? 1 : 0);
 
 	/* clear M_ABORT and Disable M_ABORT Int. */
 	tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
 	tx3927_pcicptr->pcistatim &= ~PCI_STATUS_REC_MASTER_ABORT;
-
-	return PCIBIOS_SUCCESSFUL;
+	return 0;
 }
 
 static inline int check_abort(void)
 {
-	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
+	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT) {
 		tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
 		tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
+		/* flush write buffer */
+		iob();
 		return PCIBIOS_DEVICE_NOT_FOUND;
-
+	}
 	return PCIBIOS_SUCCESSFUL;
 }
 
-static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+static int tx3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 * val)
 {
-	int ret;
-
-	ret = mkaddr(bus->number, devfn, where);
-	if (ret)
-		return ret;
+	if (mkaddr(bus, devfn, where)) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
 
 	switch (size) {
 	case 1:
@@ -94,14 +97,11 @@ static int jmr3927_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	return check_abort();
 }
 
-static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+static int tx3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 	int where, int size, u32 val)
 {
-	int ret;
-
-	ret = mkaddr(bus->number, devfn, where);
-	if (ret)
-		return ret;
+	if (mkaddr(bus, devfn, where))
+		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	switch (size) {
 	case 1:
@@ -117,15 +117,114 @@ static int jmr3927_pci_write_config(struct pci_bus *bus, unsigned int devfn,
 		tx3927_pcicptr->icd = cpu_to_le32(val);
 	}
 
-	if (tx3927_pcicptr->pcistat & PCI_STATUS_REC_MASTER_ABORT)
-		tx3927_pcicptr->pcistat |= PCI_STATUS_REC_MASTER_ABORT;
-		tx3927_pcicptr->pcistatim |= PCI_STATUS_REC_MASTER_ABORT;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
 	return check_abort();
 }
 
-struct pci_ops jmr3927_pci_ops = {
-	jmr3927_pci_read_config,
-	jmr3927_pci_write_config,
+static struct pci_ops tx3927_pci_ops = {
+	.read = tx3927_pci_read_config,
+	.write = tx3927_pci_write_config,
 };
+
+void __init tx3927_pcic_setup(struct pci_controller *channel,
+			      unsigned long sdram_size, int extarb)
+{
+	unsigned long flags;
+	unsigned long io_base =
+		channel->io_resource->start + mips_io_port_base - IO_BASE;
+	unsigned long io_size =
+		channel->io_resource->end - channel->io_resource->start;
+	unsigned long io_pciaddr =
+		channel->io_resource->start - channel->io_offset;
+	unsigned long mem_base =
+		channel->mem_resource->start;
+	unsigned long mem_size =
+		channel->mem_resource->end - channel->mem_resource->start;
+	unsigned long mem_pciaddr =
+		channel->mem_resource->start - channel->mem_offset;
+
+	printk(KERN_INFO "TX3927 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s",
+	       tx3927_pcicptr->did, tx3927_pcicptr->vid,
+	       tx3927_pcicptr->rid,
+	       extarb ? "External" : "Internal");
+	channel->pci_ops = &tx3927_pci_ops;
+
+	local_irq_save(flags);
+	/* Disable External PCI Config. Access */
+	tx3927_pcicptr->lbc = TX3927_PCIC_LBC_EPCAD;
+#ifdef __BIG_ENDIAN
+	tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_IBSE |
+		TX3927_PCIC_LBC_TIBSE |
+		TX3927_PCIC_LBC_TMFBSE | TX3927_PCIC_LBC_MSDSE;
+#endif
+	/* LB->PCI mappings */
+	tx3927_pcicptr->iomas = ~(io_size - 1);
+	tx3927_pcicptr->ilbioma = io_base;
+	tx3927_pcicptr->ipbioma = io_pciaddr;
+	tx3927_pcicptr->mmas = ~(mem_size - 1);
+	tx3927_pcicptr->ilbmma = mem_base;
+	tx3927_pcicptr->ipbmma = mem_pciaddr;
+	/* PCI->LB mappings */
+	tx3927_pcicptr->iobas = 0xffffffff;
+	tx3927_pcicptr->ioba = 0;
+	tx3927_pcicptr->tlbioma = 0;
+	tx3927_pcicptr->mbas = ~(sdram_size - 1);
+	tx3927_pcicptr->mba = 0;
+	tx3927_pcicptr->tlbmma = 0;
+	/* Enable Direct mapping Address Space Decoder */
+	tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE;
+
+	/* Clear All Local Bus Status */
+	tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
+	/* Enable All Local Bus Interrupts */
+	tx3927_pcicptr->lbim = TX3927_PCIC_LBIM_ALL;
+	/* Clear All PCI Status Error */
+	tx3927_pcicptr->pcistat = TX3927_PCIC_PCISTATIM_ALL;
+	/* Enable All PCI Status Error Interrupts */
+	tx3927_pcicptr->pcistatim = TX3927_PCIC_PCISTATIM_ALL;
+
+	/* PCIC Int => IRC IRQ10 */
+	tx3927_pcicptr->il = TX3927_IR_PCI;
+	/* Target Control (per errata) */
+	tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E;
+
+	/* Enable Bus Arbiter */
+	if (!extarb)
+		tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN;
+
+	tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER |
+		PCI_COMMAND_MEMORY |
+		PCI_COMMAND_IO |
+		PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
+	local_irq_restore(flags);
+}
+
+static irqreturn_t tx3927_pcierr_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+
+	if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+		printk(KERN_WARNING "PCI error interrupt at 0x%08lx.\n",
+		       regs->cp0_epc);
+		printk(KERN_WARNING "pcistat:%02x, lbstat:%04lx\n",
+		       tx3927_pcicptr->pcistat, tx3927_pcicptr->lbstat);
+	}
+	if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+		/* clear all pci errors */
+		tx3927_pcicptr->pcistat |= TX3927_PCIC_PCISTATIM_ALL;
+		tx3927_pcicptr->istat = TX3927_PCIC_IIM_ALL;
+		tx3927_pcicptr->tstat = TX3927_PCIC_TIM_ALL;
+		tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL;
+		return IRQ_HANDLED;
+	}
+	console_verbose();
+	panic("PCI error.");
+}
+
+void __init tx3927_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX3927_IR_PCI,
+			tx3927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX3927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index 150419c8b414..5989e747527f 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -1,209 +1,526 @@
 /*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ahennessy@mvista.com
+ * Define the pci_ops for the PCIC on Toshiba TX4927, TX4938, etc.
  *
- * Copyright (C) 2000-2001 Toshiba Corporation
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
- *
- * Based on arch/mips/ddb5xxx/ddb5477/pci_ops.c
- *
- *     Define the pci_ops for the Toshiba rbtx4927
- *
- * Much of the code is derived from the original DDB5074 port by
- * Geert Uytterhoeven <geert@sonycom.com>
+ * Based on linux/arch/mips/pci/ops-tx4938.c,
+ *          linux/arch/mips/pci/fixup-rbtx4938.c,
+ *          linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
  *
- * Copyright 2004 MontaVista Software Inc.
- * Author: Manish Lachwani (mlachwani@mvista.com)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 2003-2005 (c) MontaVista Software, Inc.
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
  *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
  */
-#include <linux/types.h>
-#include <linux/pci.h>
 #include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-#include <asm/tx4927/tx4927_pci.h>
-
-/* initialize in setup */
-struct resource pci_io_resource = {
-	.name	= "TX4927 PCI IO SPACE",
-	.start	= 0x1000,
-	.end	= (0x1000 + (TX4927_PCIIO_SIZE)) - 1,
-	.flags	= IORESOURCE_IO
-};
+#include <linux/interrupt.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/tx4927pcic.h>
 
-/* initialize in setup */
-struct resource pci_mem_resource = {
-	.name	= "TX4927 PCI MEM SPACE",
-	.start	= TX4927_PCIMEM,
-	.end	= TX4927_PCIMEM + TX4927_PCIMEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM
-};
+static struct {
+	struct pci_controller *channel;
+	struct tx4927_pcic_reg __iomem *pcicptr;
+} pcicptrs[2];	/* TX4938 has 2 pcic */
+
+static void __init set_tx4927_pcicptr(struct pci_controller *channel,
+				      struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (pcicptrs[i].channel == channel) {
+			pcicptrs[i].pcicptr = pcicptr;
+			return;
+		}
+	}
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (!pcicptrs[i].channel) {
+			pcicptrs[i].channel = channel;
+			pcicptrs[i].pcicptr = pcicptr;
+			return;
+		}
+	}
+	BUG();
+}
 
-static int mkaddr(int bus, int dev_fn, int where, int *flagsp)
+struct tx4927_pcic_reg __iomem *get_tx4927_pcicptr(
+	struct pci_controller *channel)
 {
-	if (bus > 0) {
-		/* Type 1 configuration */
-		tx4927_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
-		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1;
-	} else {
-		if (dev_fn >= PCI_DEVFN(TX4927_PCIC_MAX_DEVNU, 0))
-			return -1;
+	int i;
 
-		/* Type 0 configuration */
-		tx4927_pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
-		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc);
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (pcicptrs[i].channel == channel)
+			return pcicptrs[i].pcicptr;
 	}
+	return NULL;
+}
+
+static int mkaddr(struct pci_bus *bus, unsigned int devfn, int where,
+		  struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	if (bus->parent == NULL &&
+	    devfn >= PCI_DEVFN(TX4927_PCIC_MAX_DEVNU, 0))
+		return -1;
+	__raw_writel(((bus->number & 0xff) << 0x10)
+		     | ((devfn & 0xff) << 0x08) | (where & 0xfc)
+		     | (bus->parent ? 1 : 0),
+		     &pcicptr->g2pcfgadrs);
 	/* clear M_ABORT and Disable M_ABORT Int. */
-	tx4927_pcicptr->pcistatus =
-	    (tx4927_pcicptr->pcistatus & 0x0000ffff) |
-	    (PCI_STATUS_REC_MASTER_ABORT << 16);
-	tx4927_pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT;
+	__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+		     | (PCI_STATUS_REC_MASTER_ABORT << 16),
+		     &pcicptr->pcistatus);
 	return 0;
 }
 
-static int check_abort(int flags)
+static int check_abort(struct tx4927_pcic_reg __iomem *pcicptr)
 {
 	int code = PCIBIOS_SUCCESSFUL;
-	if (tx4927_pcicptr->
-	    pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) {
-		tx4927_pcicptr->pcistatus =
-		    (tx4927_pcicptr->
-		     pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT
-						<< 16);
-		tx4927_pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT;
+
+	/* wait write cycle completion before checking error status */
+	while (__raw_readl(&pcicptr->pcicstatus) & TX4927_PCIC_PCICSTATUS_IWB)
+		;
+	if (__raw_readl(&pcicptr->pcistatus)
+	    & (PCI_STATUS_REC_MASTER_ABORT << 16)) {
+		__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+			     | (PCI_STATUS_REC_MASTER_ABORT << 16),
+			     &pcicptr->pcistatus);
+		/* flush write buffer */
+		iob();
 		code = PCIBIOS_DEVICE_NOT_FOUND;
 	}
 	return code;
 }
 
-static int tx4927_pcibios_read_config(struct pci_bus *bus, unsigned int devfn, int where,
-		int size, u32 * val)
+static u8 icd_readb(int offset, struct tx4927_pcic_reg __iomem *pcicptr)
+{
+#ifdef __BIG_ENDIAN
+	offset ^= 3;
+#endif
+	return __raw_readb((void __iomem *)&pcicptr->g2pcfgdata + offset);
+}
+static u16 icd_readw(int offset, struct tx4927_pcic_reg __iomem *pcicptr)
+{
+#ifdef __BIG_ENDIAN
+	offset ^= 2;
+#endif
+	return __raw_readw((void __iomem *)&pcicptr->g2pcfgdata + offset);
+}
+static u32 icd_readl(struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	return __raw_readl(&pcicptr->g2pcfgdata);
+}
+static void icd_writeb(u8 val, int offset,
+		       struct tx4927_pcic_reg __iomem *pcicptr)
+{
+#ifdef __BIG_ENDIAN
+	offset ^= 3;
+#endif
+	__raw_writeb(val, (void __iomem *)&pcicptr->g2pcfgdata + offset);
+}
+static void icd_writew(u16 val, int offset,
+		       struct tx4927_pcic_reg __iomem *pcicptr)
+{
+#ifdef __BIG_ENDIAN
+	offset ^= 2;
+#endif
+	__raw_writew(val, (void __iomem *)&pcicptr->g2pcfgdata + offset);
+}
+static void icd_writel(u32 val, struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	__raw_writel(val, &pcicptr->g2pcfgdata);
+}
+
+static struct tx4927_pcic_reg __iomem *pci_bus_to_pcicptr(struct pci_bus *bus)
 {
-	int flags, retval, dev, busno, func;
+	struct pci_controller *channel = bus->sysdata;
+	return get_tx4927_pcicptr(channel);
+}
 
-	busno = bus->number;
-        dev = PCI_SLOT(devfn);
-        func = PCI_FUNC(devfn);
+static int tx4927_pci_config_read(struct pci_bus *bus, unsigned int devfn,
+				  int where, int size, u32 *val)
+{
+	struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(bus);
 
-	/* check if the bus is top-level */
-	if (bus->parent != NULL) {
-		busno = bus->number;
-	} else {
-		busno = 0;
+	if (mkaddr(bus, devfn, where, pcicptr)) {
+		*val = 0xffffffff;
+		return -1;
+	}
+	switch (size) {
+	case 1:
+		*val = icd_readb(where & 3, pcicptr);
+		break;
+	case 2:
+		*val = icd_readw(where & 3, pcicptr);
+		break;
+	default:
+		*val = icd_readl(pcicptr);
 	}
+	return check_abort(pcicptr);
+}
 
-	if (mkaddr(busno, devfn, where, &flags))
-		return -1;
+static int tx4927_pci_config_write(struct pci_bus *bus, unsigned int devfn,
+				   int where, int size, u32 val)
+{
+	struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(bus);
 
+	if (mkaddr(bus, devfn, where, pcicptr))
+		return -1;
 	switch (size) {
 	case 1:
-		*val = *(volatile u8 *) ((unsigned long) & tx4927_pcicptr->
-                              g2pcfgdata |
-#ifdef __LITTLE_ENDIAN
-						(where & 3));
-#else
-						((where & 0x3) ^ 0x3));
-#endif
+		icd_writeb(val, where & 3, pcicptr);
 		break;
 	case 2:
-		*val = *(volatile u16 *) ((unsigned long) & tx4927_pcicptr->
-                               g2pcfgdata |
-#ifdef __LITTLE_ENDIAN
-						(where & 3));
-#else
-						((where & 0x3) ^ 0x2));
-#endif
-		break;
-	case 4:
-		*val = tx4927_pcicptr->g2pcfgdata;
+		icd_writew(val, where & 3, pcicptr);
 		break;
+	default:
+		icd_writel(val, pcicptr);
 	}
+	return check_abort(pcicptr);
+}
 
-	retval = check_abort(flags);
-	if (retval == PCIBIOS_DEVICE_NOT_FOUND)
-		*val = 0xffffffff;
+static struct pci_ops tx4927_pci_ops = {
+	.read = tx4927_pci_config_read,
+	.write = tx4927_pci_config_write,
+};
 
-	return retval;
-}
+static struct {
+	u8 trdyto;
+	u8 retryto;
+	u16 gbwc;
+} tx4927_pci_opts __devinitdata = {
+	.trdyto = 0,
+	.retryto = 0,
+	.gbwc = 0xfe0,	/* 4064 GBUSCLK for CCFG.GTOT=0b11 */
+};
 
-static int tx4927_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-				int size, u32 val)
+char *__devinit tx4927_pcibios_setup(char *str)
 {
-	int flags, dev, busno, func;
-	busno = bus->number;
-        dev = PCI_SLOT(devfn);
-        func = PCI_FUNC(devfn);
+	unsigned long val;
 
-	/* check if the bus is top-level */
-	if (bus->parent != NULL) {
-		busno = bus->number;
-	} else {
-		busno = 0;
+	if (!strncmp(str, "trdyto=", 7)) {
+		if (strict_strtoul(str + 7, 0, &val) == 0)
+			tx4927_pci_opts.trdyto = val;
+		return NULL;
+	}
+	if (!strncmp(str, "retryto=", 8)) {
+		if (strict_strtoul(str + 8, 0, &val) == 0)
+			tx4927_pci_opts.retryto = val;
+		return NULL;
 	}
+	if (!strncmp(str, "gbwc=", 5)) {
+		if (strict_strtoul(str + 5, 0, &val) == 0)
+			tx4927_pci_opts.gbwc = val;
+		return NULL;
+	}
+	return str;
+}
 
-	if (mkaddr(busno, devfn, where, &flags))
-		return -1;
+void __init tx4927_pcic_setup(struct tx4927_pcic_reg __iomem *pcicptr,
+			      struct pci_controller *channel, int extarb)
+{
+	int i;
+	unsigned long flags;
 
-	switch (size) {
-	case 1:
-		 *(volatile u8 *) ((unsigned long) & tx4927_pcicptr->
-                          g2pcfgdata |
-#ifdef __LITTLE_ENDIAN
-					(where & 3)) = val;
+	set_tx4927_pcicptr(channel, pcicptr);
+
+	if (!channel->pci_ops)
+		printk(KERN_INFO
+		       "PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
+		       __raw_readl(&pcicptr->pciid) >> 16,
+		       __raw_readl(&pcicptr->pciid) & 0xffff,
+		       __raw_readl(&pcicptr->pciccrev) & 0xff,
+			extarb ? "External" : "Internal");
+	channel->pci_ops = &tx4927_pci_ops;
+
+	local_irq_save(flags);
+
+	/* Disable All Initiator Space */
+	__raw_writel(__raw_readl(&pcicptr->pciccfg)
+		     & ~(TX4927_PCIC_PCICCFG_G2PMEN(0)
+			 | TX4927_PCIC_PCICCFG_G2PMEN(1)
+			 | TX4927_PCIC_PCICCFG_G2PMEN(2)
+			 | TX4927_PCIC_PCICCFG_G2PIOEN),
+		     &pcicptr->pciccfg);
+
+	/* GB->PCI mappings */
+	__raw_writel((channel->io_resource->end - channel->io_resource->start)
+		     >> 4,
+		     &pcicptr->g2piomask);
+	____raw_writeq((channel->io_resource->start +
+			channel->io_map_base - IO_BASE) |
+#ifdef __BIG_ENDIAN
+		       TX4927_PCIC_G2PIOGBASE_ECHG
 #else
-					((where & 0x3) ^ 0x3)) = val;
+		       TX4927_PCIC_G2PIOGBASE_BSDIS
 #endif
-		break;
-
-	case 2:
-		*(volatile u16 *) ((unsigned long) & tx4927_pcicptr->
-                           g2pcfgdata |
-#ifdef __LITTLE_ENDIAN
-					(where & 3)) = val;
+		       , &pcicptr->g2piogbase);
+	____raw_writeq(channel->io_resource->start - channel->io_offset,
+		       &pcicptr->g2piopbase);
+	for (i = 0; i < 3; i++) {
+		__raw_writel(0, &pcicptr->g2pmmask[i]);
+		____raw_writeq(0, &pcicptr->g2pmgbase[i]);
+		____raw_writeq(0, &pcicptr->g2pmpbase[i]);
+	}
+	if (channel->mem_resource->end) {
+		__raw_writel((channel->mem_resource->end
+			      - channel->mem_resource->start) >> 4,
+			     &pcicptr->g2pmmask[0]);
+		____raw_writeq(channel->mem_resource->start |
+#ifdef __BIG_ENDIAN
+			       TX4927_PCIC_G2PMnGBASE_ECHG
 #else
-					((where & 0x3) ^ 0x2)) = val;
+			       TX4927_PCIC_G2PMnGBASE_BSDIS
 #endif
-		break;
-	case 4:
-		tx4927_pcicptr->g2pcfgdata = val;
-		break;
+			       , &pcicptr->g2pmgbase[0]);
+		____raw_writeq(channel->mem_resource->start -
+			       channel->mem_offset,
+			       &pcicptr->g2pmpbase[0]);
+	}
+	/* PCI->GB mappings (I/O 256B) */
+	__raw_writel(0, &pcicptr->p2giopbase); /* 256B */
+	____raw_writeq(0, &pcicptr->p2giogbase);
+	/* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */
+	__raw_writel(0, &pcicptr->p2gm0plbase);
+	__raw_writel(0, &pcicptr->p2gm0pubase);
+	____raw_writeq(TX4927_PCIC_P2GMnGBASE_TMEMEN |
+#ifdef __BIG_ENDIAN
+		       TX4927_PCIC_P2GMnGBASE_TECHG
+#else
+		       TX4927_PCIC_P2GMnGBASE_TBSDIS
+#endif
+		       , &pcicptr->p2gmgbase[0]);
+	/* PCI->GB mappings (MEM 16MB) */
+	__raw_writel(0xffffffff, &pcicptr->p2gm1plbase);
+	__raw_writel(0xffffffff, &pcicptr->p2gm1pubase);
+	____raw_writeq(0, &pcicptr->p2gmgbase[1]);
+	/* PCI->GB mappings (MEM 1MB) */
+	__raw_writel(0xffffffff, &pcicptr->p2gm2pbase); /* 1MB */
+	____raw_writeq(0, &pcicptr->p2gmgbase[2]);
+
+	/* Clear all (including IRBER) except for GBWC */
+	__raw_writel((tx4927_pci_opts.gbwc << 16)
+		     & TX4927_PCIC_PCICCFG_GBWC_MASK,
+		     &pcicptr->pciccfg);
+	/* Enable Initiator Memory Space */
+	if (channel->mem_resource->end)
+		__raw_writel(__raw_readl(&pcicptr->pciccfg)
+			     | TX4927_PCIC_PCICCFG_G2PMEN(0),
+			     &pcicptr->pciccfg);
+	/* Enable Initiator I/O Space */
+	if (channel->io_resource->end)
+		__raw_writel(__raw_readl(&pcicptr->pciccfg)
+			     | TX4927_PCIC_PCICCFG_G2PIOEN,
+			     &pcicptr->pciccfg);
+	/* Enable Initiator Config */
+	__raw_writel(__raw_readl(&pcicptr->pciccfg)
+		     | TX4927_PCIC_PCICCFG_ICAEN | TX4927_PCIC_PCICCFG_TCAR,
+		     &pcicptr->pciccfg);
+
+	/* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
+	__raw_writel(0, &pcicptr->pcicfg1);
+
+	__raw_writel((__raw_readl(&pcicptr->g2ptocnt) & ~0xffff)
+		     | (tx4927_pci_opts.trdyto & 0xff)
+		     | ((tx4927_pci_opts.retryto & 0xff) << 8),
+		     &pcicptr->g2ptocnt);
+
+	/* Clear All Local Bus Status */
+	__raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicstatus);
+	/* Enable All Local Bus Interrupts */
+	__raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicmask);
+	/* Clear All Initiator Status */
+	__raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pstatus);
+	/* Enable All Initiator Interrupts */
+	__raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pmask);
+	/* Clear All PCI Status Error */
+	__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+		     | (TX4927_PCIC_PCISTATUS_ALL << 16),
+		     &pcicptr->pcistatus);
+	/* Enable All PCI Status Error Interrupts */
+	__raw_writel(TX4927_PCIC_PCISTATUS_ALL, &pcicptr->pcimask);
+
+	if (!extarb) {
+		/* Reset Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg);
+		__raw_writel(0, &pcicptr->pbabm);
+		/* Enable Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_PBAEN, &pcicptr->pbacfg);
 	}
 
-	return check_abort(flags);
+	__raw_writel(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY
+		     | PCI_COMMAND_PARITY | PCI_COMMAND_SERR,
+		     &pcicptr->pcistatus);
+	local_irq_restore(flags);
+
+	printk(KERN_DEBUG
+	       "PCI: COMMAND=%04x,PCIMASK=%04x,"
+	       "TRDYTO=%02x,RETRYTO=%02x,GBWC=%03x\n",
+	       __raw_readl(&pcicptr->pcistatus) & 0xffff,
+	       __raw_readl(&pcicptr->pcimask) & 0xffff,
+	       __raw_readl(&pcicptr->g2ptocnt) & 0xff,
+	       (__raw_readl(&pcicptr->g2ptocnt) & 0xff00) >> 8,
+	       (__raw_readl(&pcicptr->pciccfg) >> 16) & 0xfff);
 }
 
-struct pci_ops tx4927_pci_ops = {
-	tx4927_pcibios_read_config,
-	tx4927_pcibios_write_config
-};
+static void tx4927_report_pcic_status1(struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	__u16 pcistatus = (__u16)(__raw_readl(&pcicptr->pcistatus) >> 16);
+	__u32 g2pstatus = __raw_readl(&pcicptr->g2pstatus);
+	__u32 pcicstatus = __raw_readl(&pcicptr->pcicstatus);
+	static struct {
+		__u32 flag;
+		const char *str;
+	} pcistat_tbl[] = {
+		{ PCI_STATUS_DETECTED_PARITY,	"DetectedParityError" },
+		{ PCI_STATUS_SIG_SYSTEM_ERROR,	"SignaledSystemError" },
+		{ PCI_STATUS_REC_MASTER_ABORT,	"ReceivedMasterAbort" },
+		{ PCI_STATUS_REC_TARGET_ABORT,	"ReceivedTargetAbort" },
+		{ PCI_STATUS_SIG_TARGET_ABORT,	"SignaledTargetAbort" },
+		{ PCI_STATUS_PARITY,	"MasterParityError" },
+	}, g2pstat_tbl[] = {
+		{ TX4927_PCIC_G2PSTATUS_TTOE,	"TIOE" },
+		{ TX4927_PCIC_G2PSTATUS_RTOE,	"RTOE" },
+	}, pcicstat_tbl[] = {
+		{ TX4927_PCIC_PCICSTATUS_PME,	"PME" },
+		{ TX4927_PCIC_PCICSTATUS_TLB,	"TLB" },
+		{ TX4927_PCIC_PCICSTATUS_NIB,	"NIB" },
+		{ TX4927_PCIC_PCICSTATUS_ZIB,	"ZIB" },
+		{ TX4927_PCIC_PCICSTATUS_PERR,	"PERR" },
+		{ TX4927_PCIC_PCICSTATUS_SERR,	"SERR" },
+		{ TX4927_PCIC_PCICSTATUS_GBE,	"GBE" },
+		{ TX4927_PCIC_PCICSTATUS_IWB,	"IWB" },
+	};
+	int i, cont;
 
-/*
- * h/w only supports devices 0x00 to 0x14
- */
-struct pci_controller tx4927_controller = {
-	.pci_ops        = &tx4927_pci_ops,
-	.io_resource    = &pci_io_resource,
-	.mem_resource   = &pci_mem_resource,
-};
+	printk(KERN_ERR "");
+	if (pcistatus & TX4927_PCIC_PCISTATUS_ALL) {
+		printk(KERN_CONT "pcistat:%04x(", pcistatus);
+		for (i = 0, cont = 0; i < ARRAY_SIZE(pcistat_tbl); i++)
+			if (pcistatus & pcistat_tbl[i].flag)
+				printk(KERN_CONT "%s%s",
+				       cont++ ? " " : "", pcistat_tbl[i].str);
+		printk(KERN_CONT ") ");
+	}
+	if (g2pstatus & TX4927_PCIC_G2PSTATUS_ALL) {
+		printk(KERN_CONT "g2pstatus:%08x(", g2pstatus);
+		for (i = 0, cont = 0; i < ARRAY_SIZE(g2pstat_tbl); i++)
+			if (g2pstatus & g2pstat_tbl[i].flag)
+				printk(KERN_CONT "%s%s",
+				       cont++ ? " " : "", g2pstat_tbl[i].str);
+		printk(KERN_CONT ") ");
+	}
+	if (pcicstatus & TX4927_PCIC_PCICSTATUS_ALL) {
+		printk(KERN_CONT "pcicstatus:%08x(", pcicstatus);
+		for (i = 0, cont = 0; i < ARRAY_SIZE(pcicstat_tbl); i++)
+			if (pcicstatus & pcicstat_tbl[i].flag)
+				printk(KERN_CONT "%s%s",
+				       cont++ ? " " : "", pcicstat_tbl[i].str);
+		printk(KERN_CONT ")");
+	}
+	printk(KERN_CONT "\n");
+}
+
+void tx4927_report_pcic_status(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (pcicptrs[i].pcicptr)
+			tx4927_report_pcic_status1(pcicptrs[i].pcicptr);
+	}
+}
+
+static void tx4927_dump_pcic_settings1(struct tx4927_pcic_reg __iomem *pcicptr)
+{
+	int i;
+	__u32 __iomem *preg = (__u32 __iomem *)pcicptr;
+
+	printk(KERN_INFO "tx4927 pcic (0x%p) settings:", pcicptr);
+	for (i = 0; i < sizeof(struct tx4927_pcic_reg); i += 4, preg++) {
+		if (i % 32 == 0) {
+			printk(KERN_CONT "\n");
+			printk(KERN_INFO "%04x:", i);
+		}
+		/* skip registers with side-effects */
+		if (i == offsetof(struct tx4927_pcic_reg, g2pintack)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pspc)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pcfgadrs)
+		    || i == offsetof(struct tx4927_pcic_reg, g2pcfgdata)) {
+			printk(KERN_CONT " XXXXXXXX");
+			continue;
+		}
+		printk(KERN_CONT " %08x", __raw_readl(preg));
+	}
+	printk(KERN_CONT "\n");
+}
+
+void tx4927_dump_pcic_settings(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pcicptrs); i++) {
+		if (pcicptrs[i].pcicptr)
+			tx4927_dump_pcic_settings1(pcicptrs[i].pcicptr);
+	}
+}
+
+irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id)
+{
+	struct pt_regs *regs = get_irq_regs();
+	struct tx4927_pcic_reg __iomem *pcicptr =
+		(struct tx4927_pcic_reg __iomem *)(unsigned long)dev_id;
+
+	if (txx9_pci_err_action != TXX9_PCI_ERR_IGNORE) {
+		printk(KERN_WARNING "PCIERR interrupt at 0x%0*lx\n",
+		       (int)(2 * sizeof(unsigned long)), regs->cp0_epc);
+		tx4927_report_pcic_status1(pcicptr);
+	}
+	if (txx9_pci_err_action != TXX9_PCI_ERR_PANIC) {
+		/* clear all pci errors */
+		__raw_writel((__raw_readl(&pcicptr->pcistatus) & 0x0000ffff)
+			     | (TX4927_PCIC_PCISTATUS_ALL << 16),
+			     &pcicptr->pcistatus);
+		__raw_writel(TX4927_PCIC_G2PSTATUS_ALL, &pcicptr->g2pstatus);
+		__raw_writel(TX4927_PCIC_PBASTATUS_ALL, &pcicptr->pbastatus);
+		__raw_writel(TX4927_PCIC_PCICSTATUS_ALL, &pcicptr->pcicstatus);
+		return IRQ_HANDLED;
+	}
+	console_verbose();
+	tx4927_dump_pcic_settings1(pcicptr);
+	panic("PCI error.");
+}
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
+{
+	struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus);
+
+	if (!pcicptr)
+		return;
+	if (__raw_readl(&pcicptr->pbacfg) & TX4927_PCIC_PBACFG_PBAEN) {
+		/* Reset Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_RPBA, &pcicptr->pbacfg);
+		/*
+		 * swap reqBP and reqXP (raise priority of SLC90E66).
+		 * SLC90E66(PCI-ISA bridge) is connected to REQ2 on
+		 * PCI Backplane board.
+		 */
+		__raw_writel(0x72543610, &pcicptr->pbareqport);
+		__raw_writel(0, &pcicptr->pbabm);
+		/* Use Fixed ParkMaster (required by SLC90E66) */
+		__raw_writel(TX4927_PCIC_PBACFG_FIXPA, &pcicptr->pbacfg);
+		/* Enable Bus Arbiter */
+		__raw_writel(TX4927_PCIC_PBACFG_FIXPA |
+			     TX4927_PCIC_PBACFG_PBAEN,
+			     &pcicptr->pbacfg);
+		printk(KERN_INFO "PCI: Use Fixed Park Master (REQPORT %08x)\n",
+		       __raw_readl(&pcicptr->pbareqport));
+	}
+}
+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
+	tx4927_quirk_slc90e66_bridge);
+#endif
diff --git a/arch/mips/pci/ops-tx4938.c b/arch/mips/pci/ops-tx4938.c
deleted file mode 100644
index a450c4062031..000000000000
--- a/arch/mips/pci/ops-tx4938.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Define the pci_ops for the Toshiba rbtx4938
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/addrspace.h>
-#include <asm/tx4938/rbtx4938.h>
-
-/* initialize in setup */
-struct resource pci_io_resource = {
-	.name	= "pci IO space",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_IO
-};
-
-/* initialize in setup */
-struct resource pci_mem_resource = {
-	.name	= "pci memory space",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_MEM
-};
-
-struct resource tx4938_pcic1_pci_io_resource = {
-	.name	= "PCI1 IO",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_IO
-};
-struct resource tx4938_pcic1_pci_mem_resource = {
-	.name	= "PCI1 mem",
-	.start	= 0,
-	.end	= 0,
-	.flags	= IORESOURCE_MEM
-};
-
-static int mkaddr(int bus, int dev_fn, int where,
-		  struct tx4938_pcic_reg *pcicptr)
-{
-	if (bus > 0) {
-		/* Type 1 configuration */
-		pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
-		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc) | 1;
-	} else {
-		if (dev_fn >= PCI_DEVFN(TX4938_PCIC_MAX_DEVNU, 0))
-			return -1;
-
-		/* Type 0 configuration */
-		pcicptr->g2pcfgadrs = ((bus & 0xff) << 0x10) |
-		    ((dev_fn & 0xff) << 0x08) | (where & 0xfc);
-	}
-	/* clear M_ABORT and Disable M_ABORT Int. */
-	pcicptr->pcistatus =
-	    (pcicptr->pcistatus & 0x0000ffff) |
-	    (PCI_STATUS_REC_MASTER_ABORT << 16);
-	pcicptr->pcimask &= ~PCI_STATUS_REC_MASTER_ABORT;
-
-	return 0;
-}
-
-static int check_abort(struct tx4938_pcic_reg *pcicptr)
-{
-	int code = PCIBIOS_SUCCESSFUL;
-	/* wait write cycle completion before checking error status */
-	while (pcicptr->pcicstatus & TX4938_PCIC_PCICSTATUS_IWB)
-				;
-	if (pcicptr->pcistatus & (PCI_STATUS_REC_MASTER_ABORT << 16)) {
-		pcicptr->pcistatus =
-		    (pcicptr->
-		     pcistatus & 0x0000ffff) | (PCI_STATUS_REC_MASTER_ABORT
-						<< 16);
-		pcicptr->pcimask |= PCI_STATUS_REC_MASTER_ABORT;
-		code = PCIBIOS_DEVICE_NOT_FOUND;
-	}
-	return code;
-}
-
-extern struct pci_controller tx4938_pci_controller[];
-extern struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch);
-
-static struct tx4938_pcic_reg *pci_bus_to_pcicptr(struct pci_bus *bus)
-{
-	struct pci_controller *channel = bus->sysdata;
-	return get_tx4938_pcicptr(channel - &tx4938_pci_controller[0]);
-}
-
-static int tx4938_pcibios_read_config(struct pci_bus *bus, unsigned int devfn,
-					int where, int size, u32 * val)
-{
-	int retval, dev, busno, func;
-	struct tx4938_pcic_reg *pcicptr = pci_bus_to_pcicptr(bus);
-	void __iomem *cfgdata =
-		(void __iomem *)(unsigned long)&pcicptr->g2pcfgdata;
-
-	dev = PCI_SLOT(devfn);
-	func = PCI_FUNC(devfn);
-
-	/* check if the bus is top-level */
-	if (bus->parent != NULL)
-		busno = bus->number;
-	else {
-		busno = 0;
-	}
-
-	if (mkaddr(busno, devfn, where, pcicptr))
-		return -1;
-
-	switch (size) {
-	case 1:
-#ifdef __BIG_ENDIAN
-		cfgdata += (where & 3) ^ 3;
-#else
-		cfgdata += where & 3;
-#endif
-		*val = __raw_readb(cfgdata);
-		break;
-	case 2:
-#ifdef __BIG_ENDIAN
-		cfgdata += (where & 2) ^ 2;
-#else
-		cfgdata += where & 2;
-#endif
-		*val = __raw_readw(cfgdata);
-		break;
-	case 4:
-		*val = __raw_readl(cfgdata);
-		break;
-	}
-
-	retval = check_abort(pcicptr);
-	if (retval == PCIBIOS_DEVICE_NOT_FOUND)
-		*val = 0xffffffff;
-
-	return retval;
-}
-
-static int tx4938_pcibios_write_config(struct pci_bus *bus, unsigned int devfn, int where,
-						int size, u32 val)
-{
-	int dev, busno, func;
-	struct tx4938_pcic_reg *pcicptr = pci_bus_to_pcicptr(bus);
-	void __iomem *cfgdata =
-		(void __iomem *)(unsigned long)&pcicptr->g2pcfgdata;
-
-	busno = bus->number;
-	dev = PCI_SLOT(devfn);
-	func = PCI_FUNC(devfn);
-
-	/* check if the bus is top-level */
-	if (bus->parent != NULL) {
-		busno = bus->number;
-	} else {
-		busno = 0;
-	}
-
-	if (mkaddr(busno, devfn, where, pcicptr))
-		return -1;
-
-	switch (size) {
-	case 1:
-#ifdef __BIG_ENDIAN
-		cfgdata += (where & 3) ^ 3;
-#else
-		cfgdata += where & 3;
-#endif
-		__raw_writeb(val, cfgdata);
-		break;
-	case 2:
-#ifdef __BIG_ENDIAN
-		cfgdata += (where & 2) ^ 2;
-#else
-		cfgdata += where & 2;
-#endif
-		__raw_writew(val, cfgdata);
-		break;
-	case 4:
-		__raw_writel(val, cfgdata);
-		break;
-	}
-
-	return check_abort(pcicptr);
-}
-
-struct pci_ops tx4938_pci_ops = {
-	tx4938_pcibios_read_config,
-	tx4938_pcibios_write_config
-};
-
-struct pci_controller tx4938_pci_controller[] = {
-	/* h/w only supports devices 0x00 to 0x14 */
-	{
-		.pci_ops        = &tx4938_pci_ops,
-		.io_resource    = &pci_io_resource,
-		.mem_resource   = &pci_mem_resource,
-	},
-	/* h/w only supports devices 0x00 to 0x14 */
-	{
-		.pci_ops        = &tx4938_pci_ops,
-		.io_resource    = &tx4938_pcic1_pci_io_resource,
-		.mem_resource   = &tx4938_pcic1_pci_mem_resource,
-        }
-};
diff --git a/arch/mips/pci/pci-bcm1480.c b/arch/mips/pci/pci-bcm1480.c
index 87e2c8f54e2d..a9060c771840 100644
--- a/arch/mips/pci/pci-bcm1480.c
+++ b/arch/mips/pci/pci-bcm1480.c
@@ -202,7 +202,6 @@ static int __init bcm1480_pcibios_init(void)
 {
 	uint32_t cmdreg;
 	uint64_t reg;
-	extern int pci_probe_only;
 
 	/* CFE will assign PCI resources */
 	pci_probe_only = 1;
@@ -254,8 +253,6 @@ static int __init bcm1480_pcibios_init(void)
 		ioremap(A_BCM1480_PHYS_PCI_IO_MATCH_BYTES, 65536);
 	bcm1480_controller.io_map_base -= bcm1480_controller.io_offset;
 	set_io_port_base(bcm1480_controller.io_map_base);
-	isa_slot_offset = (unsigned long)
-		ioremap(A_BCM1480_PHYS_PCI_MEM_MATCH_BYTES, 1024*1024);
 
 	register_pci_controller(&bcm1480_controller);
 
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index a18516925cdd..ce92f82b16d2 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -47,7 +47,6 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid)
 	static int num_bridges = 0;
 	bridge_t *bridge;
 	int slot;
-	extern int pci_probe_only;
 
 	pci_probe_only = 1;
 
diff --git a/arch/mips/pci/pci-jmr3927.c b/arch/mips/pci/pci-jmr3927.c
deleted file mode 100644
index cb84f4e8ccae..000000000000
--- a/arch/mips/pci/pci-jmr3927.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ahennessy@mvista.com
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/jmr3927/jmr3927.h>
-#include <asm/debug.h>
-
-struct resource pci_io_resource = {
-	.name	= "IO MEM",
-	.start	= 0x1000,			/* reserve regacy I/O space */
-	.end	= 0x1000 + JMR3927_PCIIO_SIZE - 1,
-	.flags	= IORESOURCE_IO
-};
-
-struct resource pci_mem_resource = {
-	.name	= "PCI MEM",
-	.start	= JMR3927_PCIMEM,
-	.end	= JMR3927_PCIMEM + JMR3927_PCIMEM_SIZE - 1,
-	.flags	= IORESOURCE_MEM
-};
-
-extern struct pci_ops jmr3927_pci_ops;
-
-struct pci_controller jmr3927_controller = {
-	.pci_ops	= &jmr3927_pci_ops,
-	.io_resource	= &pci_io_resource,
-	.mem_resource	= &pci_mem_resource,
-	.mem_offset	= JMR3927_PCIMEM
-};
diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c
index e70ae3236e0b..a98e543a514a 100644
--- a/arch/mips/pci/pci-lasat.c
+++ b/arch/mips/pci/pci-lasat.c
@@ -10,7 +10,7 @@
 #include <linux/pci.h>
 #include <linux/types.h>
 
-#include <asm/bootinfo.h>
+#include <asm/lasat/lasat.h>
 
 #include <irq.h>
 
@@ -39,16 +39,10 @@ static int __init lasat_pci_setup(void)
 {
 	printk(KERN_DEBUG "PCI: starting\n");
 
-	switch (mips_machtype) {
-	case MACH_LASAT_100:
-		lasat_pci_controller.pci_ops = &gt64xxx_pci0_ops;
-		break;
-	case MACH_LASAT_200:
+	if (IS_LASAT_200())
 		lasat_pci_controller.pci_ops = &nile4_pci_ops;
-		break;
-	default:
-		panic("pcibios_init: mips_machtype incorrect");
-	}
+	else
+		lasat_pci_controller.pci_ops = &gt64xxx_pci0_ops;
 
 	register_pci_controller(&lasat_pci_controller);
 
diff --git a/arch/mips/pci/pci-rc32434.c b/arch/mips/pci/pci-rc32434.c
new file mode 100644
index 000000000000..1c2821e2f494
--- /dev/null
+++ b/arch/mips/pci/pci-rc32434.c
@@ -0,0 +1,221 @@
+/*
+ *  BRIEF MODULE DESCRIPTION
+ *     PCI initialization for IDT EB434 board
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/pci.h>
+
+#define PCI_ACCESS_READ  0
+#define PCI_ACCESS_WRITE 1
+
+/* define an unsigned array for the PCI registers */
+static unsigned int korina_cnfg_regs[25] = {
+	KORINA_CNFG1, KORINA_CNFG2, KORINA_CNFG3, KORINA_CNFG4,
+	KORINA_CNFG5, KORINA_CNFG6, KORINA_CNFG7, KORINA_CNFG8,
+	KORINA_CNFG9, KORINA_CNFG10, KORINA_CNFG11, KORINA_CNFG12,
+	KORINA_CNFG13, KORINA_CNFG14, KORINA_CNFG15, KORINA_CNFG16,
+	KORINA_CNFG17, KORINA_CNFG18, KORINA_CNFG19, KORINA_CNFG20,
+	KORINA_CNFG21, KORINA_CNFG22, KORINA_CNFG23, KORINA_CNFG24
+};
+static struct resource rc32434_res_pci_mem1;
+static struct resource rc32434_res_pci_mem2;
+
+static struct resource rc32434_res_pci_mem1 = {
+	.name = "PCI MEM1",
+	.start = 0x50000000,
+	.end = 0x5FFFFFFF,
+	.flags = IORESOURCE_MEM,
+	.parent = &rc32434_res_pci_mem1,
+	.sibling = NULL,
+	.child = &rc32434_res_pci_mem2
+};
+
+static struct resource rc32434_res_pci_mem2 = {
+	.name = "PCI Mem2",
+	.start = 0x60000000,
+	.end = 0x6FFFFFFF,
+	.flags = IORESOURCE_MEM,
+	.parent = &rc32434_res_pci_mem1,
+	.sibling = NULL,
+	.child = NULL
+};
+
+static struct resource rc32434_res_pci_io1 = {
+	.name = "PCI I/O1",
+	.start = 0x18800000,
+	.end = 0x188FFFFF,
+	.flags = IORESOURCE_IO,
+};
+
+extern struct pci_ops rc32434_pci_ops;
+
+#define PCI_MEM1_START	PCI_ADDR_START
+#define PCI_MEM1_END	(PCI_ADDR_START + CPUTOPCI_MEM_WIN - 1)
+#define PCI_MEM2_START	(PCI_ADDR_START + CPUTOPCI_MEM_WIN)
+#define PCI_MEM2_END	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN)  - 1)
+#define PCI_IO1_START	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN))
+#define PCI_IO1_END 							\
+	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN - 1)
+#define PCI_IO2_START							\
+	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN)
+#define PCI_IO2_END 							\
+	(PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + (2 * CPUTOPCI_IO_WIN) - 1)
+
+struct pci_controller rc32434_controller2;
+
+struct pci_controller rc32434_controller = {
+	.pci_ops = &rc32434_pci_ops,
+	.mem_resource = &rc32434_res_pci_mem1,
+	.io_resource = &rc32434_res_pci_io1,
+	.mem_offset = 0,
+	.io_offset = 0,
+
+};
+
+#ifdef __MIPSEB__
+#define PCI_ENDIAN_FLAG PCILBAC_sb_m
+#else
+#define PCI_ENDIAN_FLAG 0
+#endif
+
+static int __init rc32434_pcibridge_init(void)
+{
+	unsigned int pcicvalue, pcicdata = 0;
+	unsigned int dummyread, pcicntlval;
+	int loopCount;
+	unsigned int pci_config_addr;
+
+	pcicvalue = rc32434_pci->pcic;
+	pcicvalue = (pcicvalue >> PCIM_SHFT) & PCIM_BIT_LEN;
+	if (!((pcicvalue == PCIM_H_EA) ||
+	      (pcicvalue == PCIM_H_IA_FIX) ||
+	      (pcicvalue == PCIM_H_IA_RR))) {
+		pr_err(KERN_ERR "PCI init error!!!\n");
+		/* Not in Host Mode, return ERROR */
+		return -1;
+	}
+	/* Enables the Idle Grant mode, Arbiter Parking */
+	pcicdata |= (PCI_CTL_IGM | PCI_CTL_EAP | PCI_CTL_EN);
+	rc32434_pci->pcic = pcicdata;	/* Enable the PCI bus Interface */
+	/* Zero out the PCI status & PCI Status Mask */
+	for (;;) {
+		pcicdata = rc32434_pci->pcis;
+		if (!(pcicdata & PCI_STAT_RIP))
+			break;
+	}
+
+	rc32434_pci->pcis = 0;
+	rc32434_pci->pcism = 0xFFFFFFFF;
+	/* Zero out the PCI decoupled registers */
+	rc32434_pci->pcidac = 0;	/*
+					 * disable PCI decoupled accesses at
+					 * initialization
+					 */
+	rc32434_pci->pcidas = 0;	/* clear the status */
+	rc32434_pci->pcidasm = 0x0000007F;	/* Mask all the interrupts */
+	/* Mask PCI Messaging Interrupts */
+	rc32434_pci_msg->pciiic = 0;
+	rc32434_pci_msg->pciiim = 0xFFFFFFFF;
+	rc32434_pci_msg->pciioic = 0;
+	rc32434_pci_msg->pciioim = 0;
+
+
+	/* Setup PCILB0 as Memory Window */
+	rc32434_pci->pcilba[0].address = (unsigned int) (PCI_ADDR_START);
+
+	/* setup the PCI map address as same as the local address */
+
+	rc32434_pci->pcilba[0].mapping = (unsigned int) (PCI_ADDR_START);
+
+
+	/* Setup PCILBA1 as MEM */
+	rc32434_pci->pcilba[0].control =
+	    (((SIZE_256MB & 0x1f) << PCI_LBAC_SIZE_BIT) | PCI_ENDIAN_FLAG);
+	dummyread = rc32434_pci->pcilba[0].control;	/* flush the CPU write Buffers */
+	rc32434_pci->pcilba[1].address = 0x60000000;
+	rc32434_pci->pcilba[1].mapping = 0x60000000;
+
+	/* setup PCILBA2 as IO Window */
+	rc32434_pci->pcilba[1].control =
+	    (((SIZE_256MB & 0x1f) << PCI_LBAC_SIZE_BIT) | PCI_ENDIAN_FLAG);
+	dummyread = rc32434_pci->pcilba[1].control;	/* flush the CPU write Buffers */
+	rc32434_pci->pcilba[2].address = 0x18C00000;
+	rc32434_pci->pcilba[2].mapping = 0x18FFFFFF;
+
+	/* setup PCILBA2 as IO Window */
+	rc32434_pci->pcilba[2].control =
+	    (((SIZE_4MB & 0x1f) << PCI_LBAC_SIZE_BIT) | PCI_ENDIAN_FLAG);
+	dummyread = rc32434_pci->pcilba[2].control;	/* flush the CPU write Buffers */
+
+	/* Setup PCILBA3 as IO Window */
+	rc32434_pci->pcilba[3].address = 0x18800000;
+	rc32434_pci->pcilba[3].mapping = 0x18800000;
+	rc32434_pci->pcilba[3].control =
+	    ((((SIZE_1MB & 0x1ff) << PCI_LBAC_SIZE_BIT) | PCI_LBAC_MSI) |
+	     PCI_ENDIAN_FLAG);
+	dummyread = rc32434_pci->pcilba[3].control;	/* flush the CPU write Buffers */
+
+	pci_config_addr = (unsigned int) (0x80000004);
+	for (loopCount = 0; loopCount < 24; loopCount++) {
+		rc32434_pci->pcicfga = pci_config_addr;
+		dummyread = rc32434_pci->pcicfga;
+		rc32434_pci->pcicfgd = korina_cnfg_regs[loopCount];
+		dummyread = rc32434_pci->pcicfgd;
+		pci_config_addr += 4;
+	}
+	rc32434_pci->pcitc =
+	    (unsigned int) ((PCITC_RTIMER_VAL & 0xff) << PCI_TC_RTIMER_BIT) |
+	    ((PCITC_DTIMER_VAL & 0xff) << PCI_TC_DTIMER_BIT);
+
+	pcicntlval = rc32434_pci->pcic;
+	pcicntlval &= ~PCI_CTL_TNR;
+	rc32434_pci->pcic = pcicntlval;
+	pcicntlval = rc32434_pci->pcic;
+
+	return 0;
+}
+
+static int __init rc32434_pci_init(void)
+{
+	pr_info("PCI: Initializing PCI\n");
+
+	ioport_resource.start = rc32434_res_pci_io1.start;
+	ioport_resource.end = rc32434_res_pci_io1.end;
+
+	rc32434_pcibridge_init();
+
+	register_pci_controller(&rc32434_controller);
+	rc32434_sync();
+
+	return 0;
+}
+
+arch_initcall(rc32434_pci_init);
diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c
index 2a09ad91ec8c..bf639590b8b2 100644
--- a/arch/mips/pci/pci-sb1250.c
+++ b/arch/mips/pci/pci-sb1250.c
@@ -210,7 +210,6 @@ static int __init sb1250_pcibios_init(void)
 	void __iomem *io_map_base;
 	uint32_t cmdreg;
 	uint64_t reg;
-	extern int pci_probe_only;
 
 	/* CFE will assign PCI resources */
 	pci_probe_only = 1;
@@ -254,9 +253,6 @@ static int __init sb1250_pcibios_init(void)
 	 * works correctly with most of Linux's drivers.
 	 * XXX ehs: Should this happen in PCI Device mode?
 	 */
-	isa_slot_offset = (unsigned long)
-	    ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES_32, 1024 * 1024);
-
 	io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024);
 	sb1250_controller.io_map_base = io_map_base;
 	set_io_port_base((unsigned long)io_map_base);
diff --git a/arch/mips/pci/pci-tx4927.c b/arch/mips/pci/pci-tx4927.c
new file mode 100644
index 000000000000..aaa900596792
--- /dev/null
+++ b/arch/mips/pci/pci-tx4927.c
@@ -0,0 +1,93 @@
+/*
+ * linux/arch/mips/pci/pci-tx4927.c
+ *
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright 2001, 2003-2005 MontaVista Software Inc.
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4927.h>
+
+int __init tx4927_report_pciclk(void)
+{
+	int pciclk = 0;
+
+	printk(KERN_INFO "PCIC --%s PCICLK:",
+	       (__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCI66) ?
+	       " PCI66" : "");
+	if (__raw_readq(&tx4927_ccfgptr->pcfg) & TX4927_PCFG_PCICLKEN_ALL) {
+		u64 ccfg = __raw_readq(&tx4927_ccfgptr->ccfg);
+		switch ((unsigned long)ccfg &
+			TX4927_CCFG_PCIDIVMODE_MASK) {
+		case TX4927_CCFG_PCIDIVMODE_2_5:
+			pciclk = txx9_cpu_clock * 2 / 5; break;
+		case TX4927_CCFG_PCIDIVMODE_3:
+			pciclk = txx9_cpu_clock / 3; break;
+		case TX4927_CCFG_PCIDIVMODE_5:
+			pciclk = txx9_cpu_clock / 5; break;
+		case TX4927_CCFG_PCIDIVMODE_6:
+			pciclk = txx9_cpu_clock / 6; break;
+		}
+		printk("Internal(%u.%uMHz)",
+		       (pciclk + 50000) / 1000000,
+		       ((pciclk + 50000) / 100000) % 10);
+	} else {
+		printk("External");
+		pciclk = -1;
+	}
+	printk("\n");
+	return pciclk;
+}
+
+int __init tx4927_pciclk66_setup(void)
+{
+	int pciclk;
+
+	/* Assert M66EN */
+	tx4927_ccfg_set(TX4927_CCFG_PCI66);
+	/* Double PCICLK (if possible) */
+	if (__raw_readq(&tx4927_ccfgptr->pcfg) & TX4927_PCFG_PCICLKEN_ALL) {
+		unsigned int pcidivmode = 0;
+		u64 ccfg = __raw_readq(&tx4927_ccfgptr->ccfg);
+		pcidivmode = (unsigned long)ccfg &
+			TX4927_CCFG_PCIDIVMODE_MASK;
+		switch (pcidivmode) {
+		case TX4927_CCFG_PCIDIVMODE_5:
+		case TX4927_CCFG_PCIDIVMODE_2_5:
+			pcidivmode = TX4927_CCFG_PCIDIVMODE_2_5;
+			pciclk = txx9_cpu_clock * 2 / 5;
+			break;
+		case TX4927_CCFG_PCIDIVMODE_6:
+		case TX4927_CCFG_PCIDIVMODE_3:
+		default:
+			pcidivmode = TX4927_CCFG_PCIDIVMODE_3;
+			pciclk = txx9_cpu_clock / 3;
+		}
+		tx4927_ccfg_change(TX4927_CCFG_PCIDIVMODE_MASK,
+				   pcidivmode);
+		printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
+		       (unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg));
+	} else
+		pciclk = -1;
+	return pciclk;
+}
+
+void __init tx4927_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX4927_IR_PCIERR,
+			tx4927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX4927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/pci-tx4938.c b/arch/mips/pci/pci-tx4938.c
new file mode 100644
index 000000000000..60e2c52c2c5e
--- /dev/null
+++ b/arch/mips/pci/pci-tx4938.c
@@ -0,0 +1,144 @@
+/*
+ * linux/arch/mips/pci/pci-tx4938.c
+ *
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright 2001, 2003-2005 MontaVista Software Inc.
+ * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4938.h>
+
+int __init tx4938_report_pciclk(void)
+{
+	int pciclk = 0;
+
+	printk(KERN_INFO "PCIC --%s PCICLK:",
+	       (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66) ?
+	       " PCI66" : "");
+	if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_PCICLKEN_ALL) {
+		u64 ccfg = __raw_readq(&tx4938_ccfgptr->ccfg);
+		switch ((unsigned long)ccfg &
+			TX4938_CCFG_PCIDIVMODE_MASK) {
+		case TX4938_CCFG_PCIDIVMODE_4:
+			pciclk = txx9_cpu_clock / 4; break;
+		case TX4938_CCFG_PCIDIVMODE_4_5:
+			pciclk = txx9_cpu_clock * 2 / 9; break;
+		case TX4938_CCFG_PCIDIVMODE_5:
+			pciclk = txx9_cpu_clock / 5; break;
+		case TX4938_CCFG_PCIDIVMODE_5_5:
+			pciclk = txx9_cpu_clock * 2 / 11; break;
+		case TX4938_CCFG_PCIDIVMODE_8:
+			pciclk = txx9_cpu_clock / 8; break;
+		case TX4938_CCFG_PCIDIVMODE_9:
+			pciclk = txx9_cpu_clock / 9; break;
+		case TX4938_CCFG_PCIDIVMODE_10:
+			pciclk = txx9_cpu_clock / 10; break;
+		case TX4938_CCFG_PCIDIVMODE_11:
+			pciclk = txx9_cpu_clock / 11; break;
+		}
+		printk("Internal(%u.%uMHz)",
+		       (pciclk + 50000) / 1000000,
+		       ((pciclk + 50000) / 100000) % 10);
+	} else {
+		printk("External");
+		pciclk = -1;
+	}
+	printk("\n");
+	return pciclk;
+}
+
+void __init tx4938_report_pci1clk(void)
+{
+	__u64 ccfg = __raw_readq(&tx4938_ccfgptr->ccfg);
+	unsigned int pciclk =
+		txx9_gbus_clock / ((ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2);
+
+	printk(KERN_INFO "PCIC1 -- %sPCICLK:%u.%uMHz\n",
+	       (ccfg & TX4938_CCFG_PCI1_66) ? "PCI66 " : "",
+	       (pciclk + 50000) / 1000000,
+	       ((pciclk + 50000) / 100000) % 10);
+}
+
+int __init tx4938_pciclk66_setup(void)
+{
+	int pciclk;
+
+	/* Assert M66EN */
+	tx4938_ccfg_set(TX4938_CCFG_PCI66);
+	/* Double PCICLK (if possible) */
+	if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_PCICLKEN_ALL) {
+		unsigned int pcidivmode = 0;
+		u64 ccfg = __raw_readq(&tx4938_ccfgptr->ccfg);
+		pcidivmode = (unsigned long)ccfg &
+			TX4938_CCFG_PCIDIVMODE_MASK;
+		switch (pcidivmode) {
+		case TX4938_CCFG_PCIDIVMODE_8:
+		case TX4938_CCFG_PCIDIVMODE_4:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_4;
+			pciclk = txx9_cpu_clock / 4;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_9:
+		case TX4938_CCFG_PCIDIVMODE_4_5:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5;
+			pciclk = txx9_cpu_clock * 2 / 9;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_10:
+		case TX4938_CCFG_PCIDIVMODE_5:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_5;
+			pciclk = txx9_cpu_clock / 5;
+			break;
+		case TX4938_CCFG_PCIDIVMODE_11:
+		case TX4938_CCFG_PCIDIVMODE_5_5:
+		default:
+			pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5;
+			pciclk = txx9_cpu_clock * 2 / 11;
+			break;
+		}
+		tx4938_ccfg_change(TX4938_CCFG_PCIDIVMODE_MASK,
+				   pcidivmode);
+		printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
+		       (unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg));
+	} else
+		pciclk = -1;
+	return pciclk;
+}
+
+int tx4938_pcic1_map_irq(const struct pci_dev *dev, u8 slot)
+{
+	if (get_tx4927_pcicptr(dev->bus->sysdata) == tx4938_pcic1ptr) {
+		switch (slot) {
+		case TX4927_PCIC_IDSEL_AD_TO_SLOT(31):
+			if (__raw_readq(&tx4938_ccfgptr->pcfg) &
+			    TX4938_PCFG_ETH0_SEL)
+				return TXX9_IRQ_BASE + TX4938_IR_ETH0;
+			break;
+		case TX4927_PCIC_IDSEL_AD_TO_SLOT(30):
+			if (__raw_readq(&tx4938_ccfgptr->pcfg) &
+			    TX4938_PCFG_ETH1_SEL)
+				return TXX9_IRQ_BASE + TX4938_IR_ETH1;
+			break;
+		}
+		return 0;
+	}
+	return -1;
+}
+
+void __init tx4938_setup_pcierr_irq(void)
+{
+	if (request_irq(TXX9_IRQ_BASE + TX4938_IR_PCIERR,
+			tx4927_pcierr_interrupt,
+			IRQF_DISABLED, "PCI error",
+			(void *)TX4927_PCIC_REG))
+		printk(KERN_WARNING "Failed to request irq for PCIERR\n");
+}
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 358ad6210949..c7fe6ec621e6 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -29,8 +29,7 @@ unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES;
  * The PCI controller list.
  */
 
-struct pci_controller *hose_head, **hose_tail = &hose_head;
-struct pci_controller *pci_isa_hose;
+static struct pci_controller *hose_head, **hose_tail = &hose_head;
 
 unsigned long PCIBIOS_MIN_IO	= 0x0000;
 unsigned long PCIBIOS_MIN_MEM	= 0;
@@ -205,7 +204,7 @@ static int pcibios_enable_resources(struct pci_dev *dev, int mask)
  *  If we set up a device for bus mastering, we need to check the latency
  *  timer as certain crappy BIOSes forget to set it properly.
  */
-unsigned int pcibios_max_latency = 255;
+static unsigned int pcibios_max_latency = 255;
 
 void pcibios_set_master(struct pci_dev *dev)
 {
@@ -329,7 +328,11 @@ EXPORT_SYMBOL(PCIBIOS_MIN_IO);
 EXPORT_SYMBOL(PCIBIOS_MIN_MEM);
 #endif
 
-char *pcibios_setup(char *str)
+char * (*pcibios_plat_setup)(char *str) __devinitdata;
+
+char *__devinit pcibios_setup(char *str)
 {
+	if (pcibios_plat_setup)
+		return pcibios_plat_setup(str);
 	return str;
 }
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_serial.c b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
index 9de34302e5f4..f7261628d8a6 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_serial.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_serial.c
@@ -38,68 +38,6 @@
 #include <msp_int.h>
 #include <msp_regs.h>
 
-#ifdef CONFIG_KGDB
-/*
- * kgdb uses serial port 1 so the console can remain on port 0.
- * To use port 0 change the definition to read as follows:
- * #define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART0_BASE)
- */
-#define DEBUG_PORT_BASE KSEG1ADDR(MSP_UART1_BASE)
-
-int putDebugChar(char c)
-{
-	volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
-	uint32_t val = (uint32_t)c;
-
-	local_irq_disable();
-	while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
-	uart[0] = val;
-	while( !(uart[5] & 0x20) ); /* Wait for TXRDY */
-	local_irq_enable();
-
-	return 1;
-}
-
-char getDebugChar(void)
-{
-	volatile uint32_t *uart = (volatile uint32_t *)DEBUG_PORT_BASE;
-	uint32_t val;
-
-	while( !(uart[5] & 0x01) ); /* Wait for RXRDY */
-	val = uart[0];
-
-	return (char)val;
-}
-
-void initDebugPort(unsigned int uartclk, unsigned int baudrate)
-{
-	unsigned int baud_divisor = (uartclk + 8 * baudrate)/(16 * baudrate);
-
-	/* Enable FIFOs */
-	writeb(UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR |
-			UART_FCR_CLEAR_XMIT | UART_FCR_TRIGGER_4,
-		(char *)DEBUG_PORT_BASE + (UART_FCR * 4));
-
-	/* Select brtc divisor */
-	writeb(UART_LCR_DLAB, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
-	/* Store divisor lsb */
-	writeb(baud_divisor, (char *)DEBUG_PORT_BASE + (UART_TX * 4));
-
-	/* Store divisor msb */
-	writeb(baud_divisor >> 8, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-
-	/* Set 8N1 mode */
-	writeb(UART_LCR_WLEN8, (char *)DEBUG_PORT_BASE + (UART_LCR * 4));
-
-	/* Disable flow control */
-	writeb(0, (char *)DEBUG_PORT_BASE + (UART_MCR * 4));
-
-	/* Disable receive interrupt(!) */
-	writeb(0, (char *)DEBUG_PORT_BASE + (UART_IER * 4));
-}
-#endif
-
 void __init msp_serial_setup(void)
 {
 	char    *s;
@@ -139,17 +77,6 @@ void __init msp_serial_setup(void)
 		case MACH_MSP7120_FPGA:
 			/* Enable UART1 on MSP4200 and MSP7120 */
 			*GPIO_CFG2_REG = 0x00002299;
-
-#ifdef CONFIG_KGDB
-			/* Initialize UART1 for kgdb since PMON doesn't */
-			if( DEBUG_PORT_BASE == KSEG1ADDR(MSP_UART1_BASE) ) {
-				if( mips_machtype == MACH_MSP4200_FPGA
-				 || mips_machtype == MACH_MSP7120_FPGA )
-					initDebugPort(uartclk, 19200);
-				else
-					initDebugPort(uartclk, 57600);
-			}
-#endif
 			break;
 
 		default:
diff --git a/arch/mips/pmc-sierra/yosemite/Makefile b/arch/mips/pmc-sierra/yosemite/Makefile
index 8fd9a04e3534..b16f95c3df65 100644
--- a/arch/mips/pmc-sierra/yosemite/Makefile
+++ b/arch/mips/pmc-sierra/yosemite/Makefile
@@ -4,7 +4,6 @@
 
 obj-y    += irq.o prom.o py-console.o setup.o
 
-obj-$(CONFIG_KGDB)		+= dbg_io.o
 obj-$(CONFIG_SMP)		+= smp.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/pmc-sierra/yosemite/dbg_io.c b/arch/mips/pmc-sierra/yosemite/dbg_io.c
deleted file mode 100644
index 6362c702e389..000000000000
--- a/arch/mips/pmc-sierra/yosemite/dbg_io.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Copyright 2003 PMC-Sierra
- * Author: Manish Lachwani (lachwani@pmc-sierra.com)
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * Support for KGDB for the Yosemite board. We make use of single serial
- * port to be used for KGDB as well as console. The second serial port
- * seems to be having a problem. Single IRQ is allocated for both the
- * ports. Hence, the interrupt routing code needs to figure out whether
- * the interrupt came from channel A or B.
- */
-
-#include <asm/serial.h>
-
-/*
- * Baud rate, Parity, Data and Stop bit settings for the
- * serial port on the Yosemite. Note that the Early printk
- * patch has been added. So, we should be all set to go
- */
-#define	YOSEMITE_BAUD_2400	2400
-#define	YOSEMITE_BAUD_4800	4800
-#define	YOSEMITE_BAUD_9600	9600
-#define	YOSEMITE_BAUD_19200	19200
-#define	YOSEMITE_BAUD_38400	38400
-#define	YOSEMITE_BAUD_57600	57600
-#define	YOSEMITE_BAUD_115200	115200
-
-#define	YOSEMITE_PARITY_NONE	0
-#define	YOSEMITE_PARITY_ODD	0x08
-#define	YOSEMITE_PARITY_EVEN	0x18
-#define	YOSEMITE_PARITY_MARK	0x28
-#define	YOSEMITE_PARITY_SPACE	0x38
-
-#define	YOSEMITE_DATA_5BIT	0x0
-#define	YOSEMITE_DATA_6BIT	0x1
-#define	YOSEMITE_DATA_7BIT	0x2
-#define	YOSEMITE_DATA_8BIT	0x3
-
-#define	YOSEMITE_STOP_1BIT	0x0
-#define	YOSEMITE_STOP_2BIT	0x4
-
-/* This is crucial */
-#define	SERIAL_REG_OFS		0x1
-
-#define	SERIAL_RCV_BUFFER	0x0
-#define	SERIAL_TRANS_HOLD	0x0
-#define	SERIAL_SEND_BUFFER	0x0
-#define	SERIAL_INTR_ENABLE	(1 * SERIAL_REG_OFS)
-#define	SERIAL_INTR_ID		(2 * SERIAL_REG_OFS)
-#define	SERIAL_DATA_FORMAT	(3 * SERIAL_REG_OFS)
-#define	SERIAL_LINE_CONTROL	(3 * SERIAL_REG_OFS)
-#define	SERIAL_MODEM_CONTROL	(4 * SERIAL_REG_OFS)
-#define	SERIAL_RS232_OUTPUT	(4 * SERIAL_REG_OFS)
-#define	SERIAL_LINE_STATUS	(5 * SERIAL_REG_OFS)
-#define	SERIAL_MODEM_STATUS	(6 * SERIAL_REG_OFS)
-#define	SERIAL_RS232_INPUT	(6 * SERIAL_REG_OFS)
-#define	SERIAL_SCRATCH_PAD	(7 * SERIAL_REG_OFS)
-
-#define	SERIAL_DIVISOR_LSB	(0 * SERIAL_REG_OFS)
-#define	SERIAL_DIVISOR_MSB	(1 * SERIAL_REG_OFS)
-
-/*
- * Functions to READ and WRITE to serial port 0
- */
-#define	SERIAL_READ(ofs)		(*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE + ofs)))
-
-#define	SERIAL_WRITE(ofs, val)		((*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE + ofs))) = val)
-
-/*
- * Functions to READ and WRITE to serial port 1
- */
-#define	SERIAL_READ_1(ofs)		(*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE_1 + ofs)))
-
-#define	SERIAL_WRITE_1(ofs, val)	((*((volatile unsigned char*)	\
-					(TITAN_SERIAL_BASE_1 + ofs))) = val)
-
-/*
- * Second serial port initialization
- */
-void init_second_port(void)
-{
-	/* Disable Interrupts */
-	SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
-	SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0x0);
-
-	{
-		unsigned int divisor;
-
-		SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x80);
-		divisor = TITAN_SERIAL_BASE_BAUD / YOSEMITE_BAUD_115200;
-		SERIAL_WRITE_1(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
-		SERIAL_WRITE_1(SERIAL_DIVISOR_MSB,
-			       (divisor & 0xff00) >> 8);
-		SERIAL_WRITE_1(SERIAL_LINE_CONTROL, 0x0);
-	}
-
-	SERIAL_WRITE_1(SERIAL_DATA_FORMAT, YOSEMITE_DATA_8BIT |
-		       YOSEMITE_PARITY_NONE | YOSEMITE_STOP_1BIT);
-
-	/* Enable Interrupts */
-	SERIAL_WRITE_1(SERIAL_INTR_ENABLE, 0xf);
-}
-
-/* Initialize the serial port for KGDB debugging */
-void debugInit(unsigned int baud, unsigned char data, unsigned char parity,
-	       unsigned char stop)
-{
-	/* Disable Interrupts */
-	SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
-	SERIAL_WRITE(SERIAL_INTR_ENABLE, 0x0);
-
-	{
-		unsigned int divisor;
-
-		SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x80);
-
-		divisor = TITAN_SERIAL_BASE_BAUD / baud;
-		SERIAL_WRITE(SERIAL_DIVISOR_LSB, divisor & 0xff);
-
-		SERIAL_WRITE(SERIAL_DIVISOR_MSB, (divisor & 0xff00) >> 8);
-		SERIAL_WRITE(SERIAL_LINE_CONTROL, 0x0);
-	}
-
-	SERIAL_WRITE(SERIAL_DATA_FORMAT, data | parity | stop);
-}
-
-static int remoteDebugInitialized = 0;
-
-unsigned char getDebugChar(void)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(YOSEMITE_BAUD_115200,
-			  YOSEMITE_DATA_8BIT,
-			  YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
-	}
-
-	while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x1) == 0);
-	return SERIAL_READ(SERIAL_RCV_BUFFER);
-}
-
-int putDebugChar(unsigned char byte)
-{
-	if (!remoteDebugInitialized) {
-		remoteDebugInitialized = 1;
-		debugInit(YOSEMITE_BAUD_115200,
-			  YOSEMITE_DATA_8BIT,
-			  YOSEMITE_PARITY_NONE, YOSEMITE_STOP_1BIT);
-	}
-
-	while ((SERIAL_READ(SERIAL_LINE_STATUS) & 0x20) == 0);
-	SERIAL_WRITE(SERIAL_SEND_BUFFER, byte);
-
-	return 1;
-}
diff --git a/arch/mips/pmc-sierra/yosemite/ht.c b/arch/mips/pmc-sierra/yosemite/ht.c
index 6380662bbf3c..678388fd34b1 100644
--- a/arch/mips/pmc-sierra/yosemite/ht.c
+++ b/arch/mips/pmc-sierra/yosemite/ht.c
@@ -345,42 +345,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
         return pcibios_enable_resources(dev);
 }
 
-
-
-void pcibios_update_resource(struct pci_dev *dev, struct resource *root,
-                             struct resource *res, int resource)
-{
-        u32 new, check;
-        int reg;
-
-        return;
-
-        new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
-        if (resource < 6) {
-                reg = PCI_BASE_ADDRESS_0 + 4 * resource;
-        } else if (resource == PCI_ROM_RESOURCE) {
-		res->flags |= IORESOURCE_ROM_ENABLE;
-                reg = dev->rom_base_reg;
-        } else {
-                /*
-                 * Somebody might have asked allocation of a non-standard
-                 * resource
-                 */
-                return;
-        }
-
-        pci_write_config_dword(dev, reg, new);
-        pci_read_config_dword(dev, reg, &check);
-        if ((new ^ check) &
-            ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK :
-             PCI_BASE_ADDRESS_MEM_MASK)) {
-                printk(KERN_ERR "PCI: Error while updating region "
-                       "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
-                       new, check);
-        }
-}
-
-
 void pcibios_align_resource(void *data, struct resource *res,
                             resource_size_t size, resource_size_t align)
 {
diff --git a/arch/mips/pmc-sierra/yosemite/irq.c b/arch/mips/pmc-sierra/yosemite/irq.c
index 4decc2807867..5f673eba142c 100644
--- a/arch/mips/pmc-sierra/yosemite/irq.c
+++ b/arch/mips/pmc-sierra/yosemite/irq.c
@@ -141,10 +141,6 @@ asmlinkage void plat_irq_dispatch(void)
 	}
 }
 
-#ifdef CONFIG_KGDB
-extern void init_second_port(void);
-#endif
-
 /*
  * Initialize the next level interrupt handler
  */
@@ -156,11 +152,6 @@ void __init arch_init_irq(void)
 	rm7k_cpu_irq_init();
 	rm9k_cpu_irq_init();
 
-#ifdef CONFIG_KGDB
-	/* At this point, initialize the second serial port */
-	init_second_port();
-#endif
-
 #ifdef CONFIG_GDB_CONSOLE
 	register_gdb_console();
 #endif
diff --git a/arch/mips/pmc-sierra/yosemite/prom.c b/arch/mips/pmc-sierra/yosemite/prom.c
index 35dc435846a6..cf4c868715ac 100644
--- a/arch/mips/pmc-sierra/yosemite/prom.c
+++ b/arch/mips/pmc-sierra/yosemite/prom.c
@@ -64,7 +64,7 @@ static void prom_exit(void)
 #ifdef CONFIG_SMP
 	if (smp_processor_id())
 		/* CPU 1 */
-		smp_call_function(prom_cpu0_exit, NULL, 1, 1);
+		smp_call_function(prom_cpu0_exit, NULL, 1);
 #endif
 	prom_cpu0_exit(NULL);
 }
diff --git a/arch/mips/rb532/Makefile b/arch/mips/rb532/Makefile
new file mode 100644
index 000000000000..8f0b6b6a1625
--- /dev/null
+++ b/arch/mips/rb532/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the RB532 board specific parts of the kernel
+#
+
+obj-y	 += irq.o time.o setup.o serial.o prom.o gpio.o devices.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
new file mode 100644
index 000000000000..44fb0a62877f
--- /dev/null
+++ b/arch/mips/rb532/devices.c
@@ -0,0 +1,331 @@
+/*
+ *  RouterBoard 500 Platform devices
+ *
+ *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
+ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *  GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+
+#include <asm/bootinfo.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/dma.h>
+#include <asm/mach-rc32434/dma_v.h>
+#include <asm/mach-rc32434/eth.h>
+#include <asm/mach-rc32434/rb.h>
+#include <asm/mach-rc32434/integ.h>
+#include <asm/mach-rc32434/gpio.h>
+
+#define ETH0_DMA_RX_IRQ   	(GROUP1_IRQ_BASE + 0)
+#define ETH0_DMA_TX_IRQ   	(GROUP1_IRQ_BASE + 1)
+#define ETH0_RX_OVR_IRQ   	(GROUP3_IRQ_BASE + 9)
+#define ETH0_TX_UND_IRQ   	(GROUP3_IRQ_BASE + 10)
+
+#define ETH0_RX_DMA_ADDR  (DMA0_BASE_ADDR + 0 * DMA_CHAN_OFFSET)
+#define ETH0_TX_DMA_ADDR  (DMA0_BASE_ADDR + 1 * DMA_CHAN_OFFSET)
+
+/* NAND definitions */
+#define GPIO_RDY (1 << 0x08)
+#define GPIO_WPX (1 << 0x09)
+#define GPIO_ALE (1 << 0x0a)
+#define GPIO_CLE (1 << 0x0b)
+
+extern char *board_type;
+
+static struct resource korina_dev0_res[] = {
+	{
+		.name = "korina_regs",
+		.start = ETH0_BASE_ADDR,
+		.end = ETH0_BASE_ADDR + sizeof(struct eth_regs),
+		.flags = IORESOURCE_MEM,
+	 }, {
+		.name = "korina_rx",
+		.start = ETH0_DMA_RX_IRQ,
+		.end = ETH0_DMA_RX_IRQ,
+		.flags = IORESOURCE_IRQ
+	}, {
+		.name = "korina_tx",
+		.start = ETH0_DMA_TX_IRQ,
+		.end = ETH0_DMA_TX_IRQ,
+		.flags = IORESOURCE_IRQ
+	}, {
+		.name = "korina_ovr",
+		.start = ETH0_RX_OVR_IRQ,
+		.end = ETH0_RX_OVR_IRQ,
+		.flags = IORESOURCE_IRQ
+	}, {
+		.name = "korina_und",
+		.start = ETH0_TX_UND_IRQ,
+		.end = ETH0_TX_UND_IRQ,
+		.flags = IORESOURCE_IRQ
+	}, {
+		.name = "korina_dma_rx",
+		.start = ETH0_RX_DMA_ADDR,
+		.end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+		.flags = IORESOURCE_MEM,
+	 }, {
+		.name = "korina_dma_tx",
+		.start = ETH0_TX_DMA_ADDR,
+		.end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
+		.flags = IORESOURCE_MEM,
+	 }
+};
+
+static struct korina_device korina_dev0_data = {
+	.name = "korina0",
+	.mac = {0xde, 0xca, 0xff, 0xc0, 0xff, 0xee}
+};
+
+static struct platform_device korina_dev0 = {
+	.id = 0,
+	.name = "korina",
+	.dev.platform_data = &korina_dev0_data,
+	.resource = korina_dev0_res,
+	.num_resources = ARRAY_SIZE(korina_dev0_res),
+};
+
+#define CF_GPIO_NUM 13
+
+static struct resource cf_slot0_res[] = {
+	{
+		.name = "cf_membase",
+		.flags = IORESOURCE_MEM
+	}, {
+		.name = "cf_irq",
+		.start = (8 + 4 * 32 + CF_GPIO_NUM),	/* 149 */
+		.end = (8 + 4 * 32 + CF_GPIO_NUM),
+		.flags = IORESOURCE_IRQ
+	}
+};
+
+static struct cf_device cf_slot0_data = {
+	.gpio_pin = 13
+};
+
+static struct platform_device cf_slot0 = {
+	.id = 0,
+	.name = "pata-rb532-cf",
+	.dev.platform_data = &cf_slot0_data,
+	.resource = cf_slot0_res,
+	.num_resources = ARRAY_SIZE(cf_slot0_res),
+};
+
+/* Resources and device for NAND */
+static int rb532_dev_ready(struct mtd_info *mtd)
+{
+	return readl(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
+}
+
+static void rb532_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd->priv;
+	unsigned char orbits, nandbits;
+
+	if (ctrl & NAND_CTRL_CHANGE) {
+		orbits = (ctrl & NAND_CLE) << 1;
+		orbits |= (ctrl & NAND_ALE) >> 1;
+
+		nandbits = (~ctrl & NAND_CLE) << 1;
+		nandbits |= (~ctrl & NAND_ALE) >> 1;
+
+		set_latch_u5(orbits, nandbits);
+	}
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, chip->IO_ADDR_W);
+}
+
+static struct resource nand_slot0_res[] = {
+	[0] = {
+		.name = "nand_membase",
+		.flags = IORESOURCE_MEM
+	}
+};
+
+static struct platform_nand_data rb532_nand_data = {
+	.ctrl.dev_ready = rb532_dev_ready,
+	.ctrl.cmd_ctrl	= rb532_cmd_ctrl,
+};
+
+static struct platform_device nand_slot0 = {
+	.name = "gen_nand",
+	.id = -1,
+	.resource = nand_slot0_res,
+	.num_resources = ARRAY_SIZE(nand_slot0_res),
+	.dev.platform_data = &rb532_nand_data,
+};
+
+static struct mtd_partition rb532_partition_info[] = {
+	{
+		.name = "Routerboard NAND boot",
+		.offset = 0,
+		.size = 4 * 1024 * 1024,
+	}, {
+		.name = "rootfs",
+		.offset = MTDPART_OFS_NXTBLK,
+		.size = MTDPART_SIZ_FULL,
+	}
+};
+
+static struct platform_device rb532_led = {
+	.name = "rb532-led",
+	.id = 0,
+};
+
+static struct gpio_keys_button rb532_gpio_btn[] = {
+	{
+		.gpio = 1,
+		.code = BTN_0,
+		.desc = "S1",
+		.active_low = 1,
+	}
+};
+
+static struct gpio_keys_platform_data rb532_gpio_btn_data = {
+	.buttons = rb532_gpio_btn,
+	.nbuttons = ARRAY_SIZE(rb532_gpio_btn),
+};
+
+static struct platform_device rb532_button = {
+	.name 	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &rb532_gpio_btn_data,
+	}
+};
+
+static struct resource rb532_wdt_res[] = {
+	{
+		.name = "rb532_wdt_res",
+		.start = INTEG0_BASE_ADDR,
+		.end = INTEG0_BASE_ADDR + sizeof(struct integ),
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device rb532_wdt = {
+	.name 		= "rc32434_wdt",
+	.id 		= -1,
+	.resource 	= rb532_wdt_res,
+	.num_resources	= ARRAY_SIZE(rb532_wdt_res),
+};
+
+static struct platform_device *rb532_devs[] = {
+	&korina_dev0,
+	&nand_slot0,
+	&cf_slot0,
+	&rb532_led,
+	&rb532_button,
+	&rb532_wdt
+};
+
+static void __init parse_mac_addr(char *macstr)
+{
+	int i, j;
+	unsigned char result, value;
+
+	for (i = 0; i < 6; i++) {
+		result = 0;
+
+		if (i != 5 && *(macstr + 2) != ':')
+			return;
+
+		for (j = 0; j < 2; j++) {
+			if (isxdigit(*macstr)
+			    && (value =
+				isdigit(*macstr) ? *macstr -
+				'0' : toupper(*macstr) - 'A' + 10) < 16) {
+				result = result * 16 + value;
+				macstr++;
+			} else
+				return;
+		}
+
+		macstr++;
+		korina_dev0_data.mac[i] = result;
+	}
+}
+
+
+/* DEVICE CONTROLLER 1 */
+#define CFG_DC_DEV1 	((void *)0xb8010010)
+#define CFG_DC_DEV2 	((void *)0xb8010020)
+#define CFG_DC_DEVBASE    0x0
+#define CFG_DC_DEVMASK    0x4
+#define CFG_DC_DEVC       0x8
+#define CFG_DC_DEVTC      0xC
+
+/* NAND definitions */
+#define NAND_CHIP_DELAY	25
+
+static void __init rb532_nand_setup(void)
+{
+	switch (mips_machtype) {
+	case MACH_MIKROTIK_RB532A:
+		set_latch_u5(LO_FOFF | LO_CEX,
+				LO_ULED | LO_ALE | LO_CLE | LO_WPX);
+		break;
+	default:
+		set_latch_u5(LO_WPX | LO_FOFF | LO_CEX,
+				LO_ULED | LO_ALE | LO_CLE);
+		break;
+	}
+
+	/* Setup NAND specific settings */
+	rb532_nand_data.chip.nr_chips = 1;
+	rb532_nand_data.chip.nr_partitions = ARRAY_SIZE(rb532_partition_info);
+	rb532_nand_data.chip.partitions = rb532_partition_info;
+	rb532_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
+	rb532_nand_data.chip.options = NAND_NO_AUTOINCR;
+}
+
+
+static int __init plat_setup_devices(void)
+{
+	/* Look for the CF card reader */
+	if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK))
+		rb532_devs[1] = NULL;
+	else {
+		cf_slot0_res[0].start =
+		    readl(CFG_DC_DEV1 + CFG_DC_DEVBASE);
+		cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
+	}
+
+	/* Read the NAND resources from the device controller */
+	nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE);
+	nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
+
+	/* Initialise the NAND device */
+	rb532_nand_setup();
+
+	return platform_add_devices(rb532_devs, ARRAY_SIZE(rb532_devs));
+}
+
+static int __init setup_kmac(char *s)
+{
+	printk(KERN_INFO "korina mac = %s\n", s);
+	parse_mac_addr(s);
+	return 0;
+}
+
+__setup("kmac=", setup_kmac);
+
+arch_initcall(plat_setup_devices);
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
new file mode 100644
index 000000000000..00a1c7877bf4
--- /dev/null
+++ b/arch/mips/rb532/gpio.c
@@ -0,0 +1,221 @@
+/*
+ *  Miscellaneous functions for IDT EB434 board
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *  Copyright 2006 Phil Sutter <n0-1@freewrt.org>
+ *  Copyright 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <asm/addrspace.h>
+
+#include <asm/mach-rc32434/rb.h>
+
+struct rb532_gpio_reg __iomem *rb532_gpio_reg0;
+EXPORT_SYMBOL(rb532_gpio_reg0);
+
+struct mpmc_device dev3;
+
+static struct resource rb532_gpio_reg0_res[] = {
+	{
+		.name 	= "gpio_reg0",
+		.start 	= (u32)(IDT434_REG_BASE + GPIOBASE),
+		.end 	= (u32)(IDT434_REG_BASE + GPIOBASE + sizeof(struct rb532_gpio_reg)),
+		.flags 	= IORESOURCE_MEM,
+	}
+};
+
+static struct resource rb532_dev3_ctl_res[] = {
+	{
+		.name	= "dev3_ctl",
+		.start	= (u32)(IDT434_REG_BASE + DEV3BASE),
+		.end	= (u32)(IDT434_REG_BASE + DEV3BASE + sizeof(struct dev_reg)),
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+void set_434_reg(unsigned reg_offs, unsigned bit, unsigned len, unsigned val)
+{
+	unsigned long flags;
+	unsigned data;
+	unsigned i = 0;
+
+	spin_lock_irqsave(&dev3.lock, flags);
+
+	data = *(volatile unsigned *) (IDT434_REG_BASE + reg_offs);
+	for (i = 0; i != len; ++i) {
+		if (val & (1 << i))
+			data |= (1 << (i + bit));
+		else
+			data &= ~(1 << (i + bit));
+	}
+	writel(data, (IDT434_REG_BASE + reg_offs));
+
+	spin_unlock_irqrestore(&dev3.lock, flags);
+}
+EXPORT_SYMBOL(set_434_reg);
+
+unsigned get_434_reg(unsigned reg_offs)
+{
+	return readl(IDT434_REG_BASE + reg_offs);
+}
+EXPORT_SYMBOL(get_434_reg);
+
+void set_latch_u5(unsigned char or_mask, unsigned char nand_mask)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dev3.lock, flags);
+
+	dev3.state = (dev3.state | or_mask) & ~nand_mask;
+	writel(dev3.state, &dev3.base);
+
+	spin_unlock_irqrestore(&dev3.lock, flags);
+}
+EXPORT_SYMBOL(set_latch_u5);
+
+unsigned char get_latch_u5(void)
+{
+	return dev3.state;
+}
+EXPORT_SYMBOL(get_latch_u5);
+
+int rb532_gpio_get_value(unsigned gpio)
+{
+	return readl(&rb532_gpio_reg0->gpiod) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_value);
+
+void rb532_gpio_set_value(unsigned gpio, int value)
+{
+	unsigned tmp;
+
+	tmp = readl(&rb532_gpio_reg0->gpiod) & ~(1 << gpio);
+	if (value)
+		tmp |= 1 << gpio;
+
+	writel(tmp, (void *)&rb532_gpio_reg0->gpiod);
+}
+EXPORT_SYMBOL(rb532_gpio_set_value);
+
+int rb532_gpio_direction_input(unsigned gpio)
+{
+	writel(readl(&rb532_gpio_reg0->gpiocfg) & ~(1 << gpio),
+	       (void *)&rb532_gpio_reg0->gpiocfg);
+
+	return 0;
+}
+EXPORT_SYMBOL(rb532_gpio_direction_input);
+
+int rb532_gpio_direction_output(unsigned gpio, int value)
+{
+	gpio_set_value(gpio, value);
+	writel(readl(&rb532_gpio_reg0->gpiocfg) | (1 << gpio),
+	       (void *)&rb532_gpio_reg0->gpiocfg);
+
+	return 0;
+}
+EXPORT_SYMBOL(rb532_gpio_direction_output);
+
+void rb532_gpio_set_int_level(unsigned gpio, int value)
+{
+	unsigned tmp;
+
+	tmp = readl(&rb532_gpio_reg0->gpioilevel) & ~(1 << gpio);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, (void *)&rb532_gpio_reg0->gpioilevel);
+}
+EXPORT_SYMBOL(rb532_gpio_set_int_level);
+
+int rb532_gpio_get_int_level(unsigned gpio)
+{
+	return readl(&rb532_gpio_reg0->gpioilevel) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_int_level);
+
+void rb532_gpio_set_int_status(unsigned gpio, int value)
+{
+	unsigned tmp;
+
+	tmp = readl(&rb532_gpio_reg0->gpioistat);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, (void *)&rb532_gpio_reg0->gpioistat);
+}
+EXPORT_SYMBOL(rb532_gpio_set_int_status);
+
+int rb532_gpio_get_int_status(unsigned gpio)
+{
+	return readl(&rb532_gpio_reg0->gpioistat) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_int_status);
+
+void rb532_gpio_set_func(unsigned gpio, int value)
+{
+	unsigned tmp;
+
+	tmp = readl(&rb532_gpio_reg0->gpiofunc);
+	if (value)
+		tmp |= 1 << gpio;
+	writel(tmp, (void *)&rb532_gpio_reg0->gpiofunc);
+}
+EXPORT_SYMBOL(rb532_gpio_set_func);
+
+int rb532_gpio_get_func(unsigned gpio)
+{
+	return readl(&rb532_gpio_reg0->gpiofunc) & (1 << gpio);
+}
+EXPORT_SYMBOL(rb532_gpio_get_func);
+
+int __init rb532_gpio_init(void)
+{
+	rb532_gpio_reg0 = ioremap_nocache(rb532_gpio_reg0_res[0].start,
+				rb532_gpio_reg0_res[0].end -
+				rb532_gpio_reg0_res[0].start);
+
+	if (!rb532_gpio_reg0) {
+		printk(KERN_ERR "rb532: cannot remap GPIO register 0\n");
+		return -ENXIO;
+	}
+
+	dev3.base = ioremap_nocache(rb532_dev3_ctl_res[0].start,
+				rb532_dev3_ctl_res[0].end -
+				rb532_dev3_ctl_res[0].start);
+
+	if (!dev3.base) {
+		printk(KERN_ERR "rb532: cannot remap device controller 3\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+arch_initcall(rb532_gpio_init);
diff --git a/arch/mips/rb532/irq.c b/arch/mips/rb532/irq.c
new file mode 100644
index 000000000000..c0d0f950caf2
--- /dev/null
+++ b/arch/mips/rb532/irq.c
@@ -0,0 +1,209 @@
+/*
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *              stevel@mvista.com or source@mvista.com
+ */
+
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+
+struct intr_group {
+	u32 mask;	/* mask of valid bits in pending/mask registers */
+	volatile u32 *base_addr;
+};
+
+#define RC32434_NR_IRQS  (GROUP4_IRQ_BASE + 32)
+
+#if (NR_IRQS < RC32434_NR_IRQS)
+#error Too little irqs defined. Did you override <asm/irq.h> ?
+#endif
+
+static const struct intr_group intr_group[NUM_INTR_GROUPS] = {
+	{
+		.mask	= 0x0000efff,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 0 * IC_GROUP_OFFSET)},
+	{
+		.mask	= 0x00001fff,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 1 * IC_GROUP_OFFSET)},
+	{
+		.mask	= 0x00000007,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 2 * IC_GROUP_OFFSET)},
+	{
+		.mask	= 0x0003ffff,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 3 * IC_GROUP_OFFSET)},
+	{
+		.mask	= 0xffffffff,
+		.base_addr = (u32 *) KSEG1ADDR(IC_GROUP0_PEND + 4 * IC_GROUP_OFFSET)}
+};
+
+#define READ_PEND(base) (*(base))
+#define READ_MASK(base) (*(base + 2))
+#define WRITE_MASK(base, val) (*(base + 2) = (val))
+
+static inline int irq_to_group(unsigned int irq_nr)
+{
+	return (irq_nr - GROUP0_IRQ_BASE) >> 5;
+}
+
+static inline int group_to_ip(unsigned int group)
+{
+	return group + 2;
+}
+
+static inline void enable_local_irq(unsigned int ip)
+{
+	int ipnum = 0x100 << ip;
+
+	set_c0_status(ipnum);
+}
+
+static inline void disable_local_irq(unsigned int ip)
+{
+	int ipnum = 0x100 << ip;
+
+	clear_c0_status(ipnum);
+}
+
+static inline void ack_local_irq(unsigned int ip)
+{
+	int ipnum = 0x100 << ip;
+
+	clear_c0_cause(ipnum);
+}
+
+static void rb532_enable_irq(unsigned int irq_nr)
+{
+	int ip = irq_nr - GROUP0_IRQ_BASE;
+	unsigned int group, intr_bit;
+	volatile unsigned int *addr;
+
+	if (ip < 0)
+		enable_local_irq(irq_nr);
+	else {
+		group = ip >> 5;
+
+		ip &= (1 << 5) - 1;
+		intr_bit = 1 << ip;
+
+		enable_local_irq(group_to_ip(group));
+
+		addr = intr_group[group].base_addr;
+		WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit);
+	}
+}
+
+static void rb532_disable_irq(unsigned int irq_nr)
+{
+	int ip = irq_nr - GROUP0_IRQ_BASE;
+	unsigned int group, intr_bit, mask;
+	volatile unsigned int *addr;
+
+	if (ip < 0) {
+		disable_local_irq(irq_nr);
+	} else {
+		group = ip >> 5;
+
+		ip &= (1 << 5) - 1;
+		intr_bit = 1 << ip;
+		addr = intr_group[group].base_addr;
+		mask = READ_MASK(addr);
+		mask |= intr_bit;
+		WRITE_MASK(addr, mask);
+
+		/*
+		 * if there are no more interrupts enabled in this
+		 * group, disable corresponding IP
+		 */
+		if (mask == intr_group[group].mask)
+			disable_local_irq(group_to_ip(group));
+	}
+}
+
+static void rb532_mask_and_ack_irq(unsigned int irq_nr)
+{
+	rb532_disable_irq(irq_nr);
+	ack_local_irq(group_to_ip(irq_to_group(irq_nr)));
+}
+
+static struct irq_chip rc32434_irq_type = {
+	.name		= "RB532",
+	.ack		= rb532_disable_irq,
+	.mask		= rb532_disable_irq,
+	.mask_ack	= rb532_mask_and_ack_irq,
+	.unmask		= rb532_enable_irq,
+};
+
+void __init arch_init_irq(void)
+{
+	int i;
+
+	pr_info("Initializing IRQ's: %d out of %d\n", RC32434_NR_IRQS, NR_IRQS);
+
+	for (i = 0; i < RC32434_NR_IRQS; i++)
+		set_irq_chip_and_handler(i,  &rc32434_irq_type,
+					handle_level_irq);
+}
+
+/* Main Interrupt dispatcher */
+asmlinkage void plat_irq_dispatch(void)
+{
+	unsigned int ip, pend, group;
+	volatile unsigned int *addr;
+	unsigned int cp0_cause = read_c0_cause() & read_c0_status();
+
+	if (cp0_cause & CAUSEF_IP7) {
+		do_IRQ(7);
+	} else {
+		ip = (cp0_cause & 0x7c00);
+		if (ip) {
+			group = 21 + (fls(ip) - 32);
+
+			addr = intr_group[group].base_addr;
+
+			pend = READ_PEND(addr);
+			pend &= ~READ_MASK(addr);	/* only unmasked interrupts */
+			pend = 39 + (fls(pend) - 32);
+			do_IRQ((group << 5) + pend);
+		}
+	}
+}
diff --git a/arch/mips/rb532/prom.c b/arch/mips/rb532/prom.c
new file mode 100644
index 000000000000..1bc0af8febf4
--- /dev/null
+++ b/arch/mips/rb532/prom.c
@@ -0,0 +1,158 @@
+/*
+ *  RouterBoard 500 specific prom routines
+ *
+ *  Copyright (C) 2003, Peter Sadik <peter.sadik@idt.com>
+ *  Copyright (C) 2005-2006, P.Christeas <p_christ@hol.gr>
+ *  Copyright (C) 2007, Gabor Juhos <juhosg@openwrt.org>
+ *			Felix Fietkau <nbd@openwrt.org>
+ *			Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/console.h>
+#include <linux/bootmem.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+
+#include <asm/bootinfo.h>
+#include <asm/mach-rc32434/ddr.h>
+#include <asm/mach-rc32434/prom.h>
+
+extern void __init setup_serial_port(void);
+
+unsigned int idt_cpu_freq = 132000000;
+EXPORT_SYMBOL(idt_cpu_freq);
+unsigned int gpio_bootup_state;
+EXPORT_SYMBOL(gpio_bootup_state);
+
+static struct resource ddr_reg[] = {
+	{
+		.name = "ddr-reg",
+		.start = DDR0_PHYS_ADDR,
+		.end = DDR0_PHYS_ADDR + sizeof(struct ddr_ram),
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+void __init prom_free_prom_memory(void)
+{
+	/* No prom memory to free */
+}
+
+static inline int match_tag(char *arg, const char *tag)
+{
+	return strncmp(arg, tag, strlen(tag)) == 0;
+}
+
+static inline unsigned long tag2ul(char *arg, const char *tag)
+{
+	char *num;
+
+	num = arg + strlen(tag);
+	return simple_strtoul(num, 0, 10);
+}
+
+void __init prom_setup_cmdline(void)
+{
+	char cmd_line[CL_SIZE];
+	char *cp, *board;
+	int prom_argc;
+	char **prom_argv, **prom_envp;
+	int i;
+
+	prom_argc = fw_arg0;
+	prom_argv = (char **) fw_arg1;
+	prom_envp = (char **) fw_arg2;
+
+	cp = cmd_line;
+		/* Note: it is common that parameters start
+		 * at argv[1] and not argv[0],
+		 * however, our elf loader starts at [0] */
+	for (i = 0; i < prom_argc; i++) {
+		if (match_tag(prom_argv[i], FREQ_TAG)) {
+			idt_cpu_freq = tag2ul(prom_argv[i], FREQ_TAG);
+			continue;
+		}
+#ifdef IGNORE_CMDLINE_MEM
+		/* parses out the "mem=xx" arg */
+		if (match_tag(prom_argv[i], MEM_TAG))
+			continue;
+#endif
+		if (i > 0)
+			*(cp++) = ' ';
+		if (match_tag(prom_argv[i], BOARD_TAG)) {
+			board = prom_argv[i] + strlen(BOARD_TAG);
+
+			if (match_tag(board, BOARD_RB532A))
+				mips_machtype = MACH_MIKROTIK_RB532A;
+			else
+				mips_machtype = MACH_MIKROTIK_RB532;
+		}
+
+		if (match_tag(prom_argv[i], GPIO_TAG))
+			gpio_bootup_state = tag2ul(prom_argv[i], GPIO_TAG);
+
+		strcpy(cp, prom_argv[i]);
+		cp += strlen(prom_argv[i]);
+	}
+	*(cp++) = ' ';
+
+	i = strlen(arcs_cmdline);
+	if (i > 0) {
+		*(cp++) = ' ';
+		strcpy(cp, arcs_cmdline);
+		cp += strlen(arcs_cmdline);
+	}
+	if (gpio_bootup_state & 0x02)
+		strcpy(cp, GPIO_INIT_NOBUTTON);
+	else
+		strcpy(cp, GPIO_INIT_BUTTON);
+
+	cmd_line[CL_SIZE-1] = '\0';
+
+	strcpy(arcs_cmdline, cmd_line);
+}
+
+void __init prom_init(void)
+{
+	struct ddr_ram __iomem *ddr;
+	phys_t memsize;
+	phys_t ddrbase;
+
+	ddr = ioremap_nocache(ddr_reg[0].start,
+			ddr_reg[0].end - ddr_reg[0].start);
+
+	if (!ddr) {
+		printk(KERN_ERR "Unable to remap DDR register\n");
+		return;
+	}
+
+	ddrbase = (phys_t)&ddr->ddrbase;
+	memsize = (phys_t)&ddr->ddrmask;
+	memsize = 0 - memsize;
+
+	prom_setup_cmdline();
+
+	/* give all RAM to boot allocator,
+	 * except for the first 0x400 and the last 0x200 bytes */
+	add_memory_region(ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM);
+}
diff --git a/arch/mips/rb532/serial.c b/arch/mips/rb532/serial.c
new file mode 100644
index 000000000000..1a05b5ddee09
--- /dev/null
+++ b/arch/mips/rb532/serial.c
@@ -0,0 +1,53 @@
+/*
+ *  BRIEF MODULE DESCRIPTION
+ *     Serial port initialisation.
+ *
+ *  Copyright 2004 IDT Inc. (rischelp@idt.com)
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/serial_core.h>
+#include <linux/serial_8250.h>
+
+#include <asm/serial.h>
+#include <asm/mach-rc32434/rc32434.h>
+
+extern unsigned int idt_cpu_freq;
+
+static struct uart_port rb532_uart = {
+	.type = PORT_16550A,
+	.line = 0,
+	.irq = RC32434_UART0_IRQ,
+	.iotype = UPIO_MEM,
+	.membase = (char *)KSEG1ADDR(RC32434_UART0_BASE),
+	.regshift = 2
+};
+
+int __init setup_serial_port(void)
+{
+	rb532_uart.uartclk = idt_cpu_freq;
+
+	return early_serial_setup(&rb532_uart);
+}
+arch_initcall(setup_serial_port);
diff --git a/arch/mips/rb532/setup.c b/arch/mips/rb532/setup.c
new file mode 100644
index 000000000000..7aafa95ac20b
--- /dev/null
+++ b/arch/mips/rb532/setup.c
@@ -0,0 +1,79 @@
+/*
+ * setup.c - boot time setup code
+ */
+
+#include <linux/init.h>
+
+#include <asm/bootinfo.h>
+#include <asm/reboot.h>
+#include <asm/time.h>
+#include <linux/ioport.h>
+
+#include <asm/mach-rc32434/rc32434.h>
+#include <asm/mach-rc32434/pci.h>
+
+struct pci_reg __iomem *pci_reg;
+EXPORT_SYMBOL(pci_reg);
+
+static struct resource pci0_res[] = {
+	{
+		.name = "pci_reg0",
+		.start = PCI0_BASE_ADDR,
+		.end = PCI0_BASE_ADDR + sizeof(struct pci_reg),
+		.flags = IORESOURCE_MEM,
+	}
+};
+
+static void rb_machine_restart(char *command)
+{
+	/* just jump to the reset vector */
+	writel(0x80000001, (void *)KSEG1ADDR(RC32434_REG_BASE + RC32434_RST));
+	((void (*)(void)) KSEG1ADDR(0x1FC00000u))();
+}
+
+static void rb_machine_halt(void)
+{
+	for (;;)
+		continue;
+}
+
+void __init plat_mem_setup(void)
+{
+	u32 val;
+
+	_machine_restart = rb_machine_restart;
+	_machine_halt = rb_machine_halt;
+	pm_power_off = rb_machine_halt;
+
+	set_io_port_base(KSEG1);
+
+	pci_reg = ioremap_nocache(pci0_res[0].start,
+				pci0_res[0].end - pci0_res[0].start);
+	if (!pci_reg) {
+		printk(KERN_ERR "Could not remap PCI registers\n");
+		return;
+	}
+
+	val = __raw_readl(&pci_reg->pcic);
+	val &= 0xFFFFFF7;
+	__raw_writel(val, (void *)&pci_reg->pcic);
+
+#ifdef CONFIG_PCI
+	/* Enable PCI interrupts in EPLD Mask register */
+	*epld_mask = 0x0;
+	*(epld_mask + 1) = 0x0;
+#endif
+	write_c0_wired(0);
+}
+
+const char *get_system_type(void)
+{
+	switch (mips_machtype) {
+	case MACH_MIKROTIK_RB532A:
+		return "Mikrotik RB532A";
+		break;
+	default:
+		return "Mikrotik RB532";
+		break;
+	}
+}
diff --git a/arch/mips/rb532/time.c b/arch/mips/rb532/time.c
new file mode 100644
index 000000000000..8e7a46855b50
--- /dev/null
+++ b/arch/mips/rb532/time.c
@@ -0,0 +1,67 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ *  Setting up the clock on the MIPS boards.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/sched.h>
+#include <linux/spinlock.h>
+#include <linux/mc146818rtc.h>
+#include <linux/irq.h>
+#include <linux/timex.h>
+
+#include <asm/mipsregs.h>
+#include <asm/debug.h>
+#include <asm/time.h>
+#include <asm/mach-rc32434/rc32434.h>
+
+extern unsigned int idt_cpu_freq;
+
+/*
+ * Figure out the r4k offset, the amount to increment the compare
+ * register for each time tick. There is no RTC available.
+ *
+ * The RC32434 counts at half the CPU *core* speed.
+ */
+static unsigned long __init cal_r4koff(void)
+{
+	mips_hpt_frequency = idt_cpu_freq * IDT_CLOCK_MULT / 2;
+
+	return mips_hpt_frequency / HZ;
+}
+
+void __init plat_time_init(void)
+{
+	unsigned int est_freq;
+	unsigned long flags, r4k_offset;
+
+	local_irq_save(flags);
+
+	printk(KERN_INFO "calculating r4koff... ");
+	r4k_offset = cal_r4koff();
+	printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
+
+	est_freq = 2 * r4k_offset * HZ;
+	est_freq += 5000;	/* round */
+	est_freq -= est_freq % 10000;
+	printk(KERN_INFO "CPU frequency %d.%02d MHz\n", est_freq / 1000000,
+	       (est_freq % 1000000) * 100 / 1000000);
+	local_irq_restore(flags);
+}
diff --git a/arch/mips/sgi-ip22/ip22-mc.c b/arch/mips/sgi-ip22/ip22-mc.c
index 3f35d6367bec..5268ac187bbd 100644
--- a/arch/mips/sgi-ip22/ip22-mc.c
+++ b/arch/mips/sgi-ip22/ip22-mc.c
@@ -208,4 +208,30 @@ void __init sgimc_init(void)
 void __init prom_meminit(void) {}
 void __init prom_free_prom_memory(void)
 {
+#ifdef CONFIG_SGI_IP28
+	u32 mconfig1;
+	unsigned long flags;
+	spinlock_t lock;
+
+	/*
+	 * because ARCS accesses memory uncached we wait until ARCS
+	 * isn't needed any longer, before we switch from slow to
+	 * normal mode
+	 */
+	spin_lock_irqsave(&lock, flags);
+	mconfig1 = sgimc->mconfig1;
+	/* map ECC register */
+	sgimc->mconfig1 = (mconfig1 & 0xffff0000) | 0x2060;
+	iob();
+	/* switch to normal mode */
+	*(unsigned long *)PHYS_TO_XKSEG_UNCACHED(0x60000000) = 0;
+	iob();
+	/* reduce WR_COL */
+	sgimc->cmacc = (sgimc->cmacc & ~0xf) | 4;
+	iob();
+	/* restore old config */
+	sgimc->mconfig1 = mconfig1;
+	iob();
+	spin_unlock_irqrestore(&lock, flags);
+#endif
 }
diff --git a/arch/mips/sgi-ip22/ip22-platform.c b/arch/mips/sgi-ip22/ip22-platform.c
index 28ffec8e5d1a..60141235ec40 100644
--- a/arch/mips/sgi-ip22/ip22-platform.c
+++ b/arch/mips/sgi-ip22/ip22-platform.c
@@ -175,3 +175,20 @@ static int __init sgiseeq_devinit(void)
 }
 
 device_initcall(sgiseeq_devinit);
+
+static int __init sgi_hal2_devinit(void)
+{
+	return IS_ERR(platform_device_register_simple("sgihal2", 0, NULL, 0));
+}
+
+device_initcall(sgi_hal2_devinit);
+
+static int __init sgi_button_devinit(void)
+{
+	if (ip22_is_fullhouse())
+		return 0; /* full house has no volume buttons */
+
+	return IS_ERR(platform_device_register_simple("sgibtns", -1, NULL, 0));
+}
+
+device_initcall(sgi_button_devinit);
diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c
index a435b31cf031..4ad5c3393fd3 100644
--- a/arch/mips/sgi-ip22/ip22-reset.c
+++ b/arch/mips/sgi-ip22/ip22-reset.c
@@ -39,7 +39,7 @@
 #define POWERDOWN_FREQ		(HZ / 4)
 #define PANIC_FREQ		(HZ / 8)
 
-static struct timer_list power_timer, blink_timer, debounce_timer, volume_timer;
+static struct timer_list power_timer, blink_timer, debounce_timer;
 
 #define MACHINE_PANICED		1
 #define MACHINE_SHUTTING_DOWN	2
@@ -139,36 +139,6 @@ static inline void power_button(void)
 	add_timer(&power_timer);
 }
 
-void (*indy_volume_button)(int) = NULL;
-
-EXPORT_SYMBOL(indy_volume_button);
-
-static inline void volume_up_button(unsigned long data)
-{
-	del_timer(&volume_timer);
-
-	if (indy_volume_button)
-		indy_volume_button(1);
-
-	if (sgint->istat1 & SGINT_ISTAT1_PWR) {
-		volume_timer.expires = jiffies + (HZ / 100);
-		add_timer(&volume_timer);
-	}
-}
-
-static inline void volume_down_button(unsigned long data)
-{
-	del_timer(&volume_timer);
-
-	if (indy_volume_button)
-		indy_volume_button(-1);
-
-	if (sgint->istat1 & SGINT_ISTAT1_PWR) {
-		volume_timer.expires = jiffies + (HZ / 100);
-		add_timer(&volume_timer);
-	}
-}
-
 static irqreturn_t panel_int(int irq, void *dev_id)
 {
 	unsigned int buttons;
@@ -190,25 +160,8 @@ static irqreturn_t panel_int(int irq, void *dev_id)
 	 * House. Only lowest 2 bits are used. Guiness uses upper four bits
 	 * for volume control". This is not true, all bits are pulled high
 	 * on fullhouse */
-	if (ip22_is_fullhouse() || !(buttons & SGIOC_PANEL_POWERINTR)) {
+	if (!(buttons & SGIOC_PANEL_POWERINTR))
 		power_button();
-		return IRQ_HANDLED;
-	}
-	/* TODO: mute/unmute */
-	/* Volume up button was pressed */
-	if (!(buttons & SGIOC_PANEL_VOLUPINTR)) {
-		init_timer(&volume_timer);
-		volume_timer.function = volume_up_button;
-		volume_timer.expires = jiffies + (HZ / 100);
-		add_timer(&volume_timer);
-	}
-	/* Volume down button was pressed */
-	if (!(buttons & SGIOC_PANEL_VOLDNINTR)) {
-		init_timer(&volume_timer);
-		volume_timer.function = volume_down_button;
-		volume_timer.expires = jiffies + (HZ / 100);
-		add_timer(&volume_timer);
-	}
 
 	return IRQ_HANDLED;
 }
diff --git a/arch/mips/sgi-ip22/ip22-setup.c b/arch/mips/sgi-ip22/ip22-setup.c
index 5f389ee26fca..896a1ef84829 100644
--- a/arch/mips/sgi-ip22/ip22-setup.c
+++ b/arch/mips/sgi-ip22/ip22-setup.c
@@ -20,7 +20,6 @@
 #include <asm/irq.h>
 #include <asm/reboot.h>
 #include <asm/time.h>
-#include <asm/gdb-stub.h>
 #include <asm/io.h>
 #include <asm/traps.h>
 #include <asm/sgialib.h>
@@ -81,30 +80,6 @@ void __init plat_mem_setup(void)
 		add_preferred_console("arc", 0, NULL);
 	}
 
-#ifdef CONFIG_KGDB
-	{
-	char *kgdb_ttyd = prom_getcmdline();
-
-	if ((kgdb_ttyd = strstr(kgdb_ttyd, "kgdb=ttyd")) != NULL) {
-		int line;
-		kgdb_ttyd += strlen("kgdb=ttyd");
-		if (*kgdb_ttyd != '1' && *kgdb_ttyd != '2')
-			printk(KERN_INFO "KGDB: Uknown serial line /dev/ttyd%c"
-			       ", falling back to /dev/ttyd1\n", *kgdb_ttyd);
-		line = *kgdb_ttyd == '2' ? 0 : 1;
-		printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
-		       "session\n", line ? 1 : 2);
-		rs_kgdb_hook(line);
-
-		printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
-		       "session, please connect your debugger\n", line ? 1:2);
-
-		kgdb_enabled = 1;
-		/* Breakpoints and stuff are in sgi_irq_setup() */
-	}
-	}
-#endif
-
 #if defined(CONFIG_VT) && defined(CONFIG_SGI_NEWPORT_CONSOLE)
 	{
 		ULONG *gfxinfo;
diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile
index e0a6871d56e4..31f4931b8484 100644
--- a/arch/mips/sgi-ip27/Makefile
+++ b/arch/mips/sgi-ip27/Makefile
@@ -7,7 +7,6 @@ obj-y	:= ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o ip27-klnuma.o \
 	   ip27-xtalk.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= ip27-console.o
-obj-$(CONFIG_KGDB)		+= ip27-dbgio.o
 obj-$(CONFIG_SMP)		+= ip27-smp.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/sgi-ip27/ip27-dbgio.c b/arch/mips/sgi-ip27/ip27-dbgio.c
deleted file mode 100644
index 08fd88b36f80..000000000000
--- a/arch/mips/sgi-ip27/ip27-dbgio.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Copyright 2004 Ralf Baechle <ralf@linux-mips.org>
- */
-#include <asm/sn/addrs.h>
-#include <asm/sn/sn0/hub.h>
-#include <asm/sn/klconfig.h>
-#include <asm/sn/ioc3.h>
-#include <asm/sn/sn_private.h>
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_reg.h>
-
-#define IOC3_CLK        (22000000 / 3)
-#define IOC3_FLAGS      (0)
-
-static inline struct ioc3_uartregs *console_uart(void)
-{
-	struct ioc3 *ioc3;
-
-	ioc3 = (struct ioc3 *)KL_CONFIG_CH_CONS_INFO(get_nasid())->memory_base;
-
-	return &ioc3->sregs.uarta;
-}
-
-unsigned char getDebugChar(void)
-{
-	struct ioc3_uartregs *uart = console_uart();
-
-	while ((uart->iu_lsr & UART_LSR_DR) == 0);
-	return uart->iu_rbr;
-}
-
-void putDebugChar(unsigned char c)
-{
-	struct ioc3_uartregs *uart = console_uart();
-
-	while ((uart->iu_lsr & UART_LSR_THRE) == 0);
-	uart->iu_thr = c;
-}
diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c
index 48932ce1d730..d9c79d8be81d 100644
--- a/arch/mips/sgi-ip27/ip27-klnuma.c
+++ b/arch/mips/sgi-ip27/ip27-klnuma.c
@@ -4,6 +4,7 @@
  * Copyright 2000 - 2001 Kanoj Sarcar (kanoj@sgi.com)
  */
 #include <linux/init.h>
+#include <linux/mm.h>
 #include <linux/mmzone.h>
 #include <linux/kernel.h>
 #include <linux/nodemask.h>
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index 42cd10956306..060d853d7b35 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -33,8 +33,6 @@
 #define SLOT_PFNSHIFT           (SLOT_SHIFT - PAGE_SHIFT)
 #define PFN_NASIDSHFT           (NASID_SHFT - PAGE_SHIFT)
 
-static struct bootmem_data __initdata plat_node_bdata[MAX_COMPACT_NODES];
-
 struct node_data *__node_data[MAX_COMPACT_NODES];
 
 EXPORT_SYMBOL(__node_data);
@@ -403,7 +401,7 @@ static void __init node_mem_init(cnodeid_t node)
 	 */
 	__node_data[node] = __va(slot_freepfn << PAGE_SHIFT);
 
-	NODE_DATA(node)->bdata = &plat_node_bdata[node];
+	NODE_DATA(node)->bdata = &bootmem_node_data[node];
 	NODE_DATA(node)->node_start_pfn = start_pfn;
 	NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
 
diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c
index b0a25e1ee8b7..64459e7d891b 100644
--- a/arch/mips/sgi-ip27/ip27-nmi.c
+++ b/arch/mips/sgi-ip27/ip27-nmi.c
@@ -1,4 +1,3 @@
-#include <linux/kallsyms.h>
 #include <linux/kernel.h>
 #include <linux/mmzone.h>
 #include <linux/nodemask.h>
@@ -84,13 +83,10 @@ void nmi_cpu_eframe_save(nasid_t nasid, int slice)
 	/*
 	 * Saved cp0 registers
 	 */
-	printk("epc   : %016lx ", nr->epc);
-	print_symbol("%s ", nr->epc);
+	printk("epc   : %016lx %pS\n", nr->epc, (void *) nr->epc);
 	printk("%s\n", print_tainted());
-	printk("ErrEPC: %016lx ", nr->error_epc);
-	print_symbol("%s\n", nr->error_epc);
-	printk("ra    : %016lx ", nr->gpr[31]);
-	print_symbol("%s\n", nr->gpr[31]);
+	printk("ErrEPC: %016lx %pS\n", nr->error_epc, (void *) nr->error_epc);
+	printk("ra    : %016lx %pS\n", nr->gpr[31], (void *) nr->gpr[31]);
 	printk("Status: %08lx         ", nr->sr);
 
 	if (nr->sr & ST0_KX)
diff --git a/arch/mips/sgi-ip32/ip32-platform.c b/arch/mips/sgi-ip32/ip32-platform.c
index 89a71f49b692..3d63721e0e80 100644
--- a/arch/mips/sgi-ip32/ip32-platform.c
+++ b/arch/mips/sgi-ip32/ip32-platform.c
@@ -65,6 +65,31 @@ static __init int meth_devinit(void)
 
 device_initcall(meth_devinit);
 
+static __init int sgio2audio_devinit(void)
+{
+	struct platform_device *pd;
+	int ret;
+
+	pd = platform_device_alloc("sgio2audio", -1);
+	if (!pd)
+		return -ENOMEM;
+
+	ret = platform_device_add(pd);
+	if (ret)
+		platform_device_put(pd);
+
+	return ret;
+}
+
+device_initcall(sgio2audio_devinit);
+
+static __init int sgio2btns_devinit(void)
+{
+	return IS_ERR(platform_device_register_simple("sgibtns", -1, NULL, 0));
+}
+
+device_initcall(sgio2btns_devinit);
+
 MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("8250 UART probe driver for SGI IP32 aka O2");
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index db372a0f106d..a35818ed4263 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -57,30 +57,6 @@ static void bcm1480_set_affinity(unsigned int irq, cpumask_t mask);
 extern unsigned long ht_eoi_space;
 #endif
 
-#ifdef CONFIG_KGDB
-#include <asm/gdb-stub.h>
-extern void breakpoint(void);
-static int kgdb_irq;
-#ifdef CONFIG_GDB_CONSOLE
-extern void register_gdb_console(void);
-#endif
-
-/* kgdb is on when configured.  Pass "nokgdb" kernel arg to turn it off */
-static int kgdb_flag = 1;
-static int __init nokgdb(char *str)
-{
-	kgdb_flag = 0;
-	return 1;
-}
-__setup("nokgdb", nokgdb);
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
 static struct irq_chip bcm1480_irq_type = {
 	.name = "BCM1480-IMR",
 	.ack = ack_bcm1480_irq,
@@ -355,61 +331,10 @@ void __init arch_init_irq(void)
 	 * does its own management of IP7.
 	 */
 
-#ifdef CONFIG_KGDB
-	imask |= STATUSF_IP6;
-#endif
 	/* Enable necessary IPs, disable the rest */
 	change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		kgdb_irq = K_BCM1480_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
-		sb1250_duart_present[kgdb_port] = 0;
-#endif
-		/* Setup uart 1 settings, mapper */
-		/* QQQ FIXME */
-		__raw_writeq(M_DUART_IMR_BRK, IOADDR(A_DUART_IMRREG(kgdb_port)));
-
-		__raw_writeq(IMR_IP6_VAL,
-			     IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
-			     (kgdb_irq << 3)));
-		bcm1480_unmask_irq(0, kgdb_irq);
-
-#ifdef CONFIG_GDB_CONSOLE
-		register_gdb_console();
-#endif
-		printk("Waiting for GDB on UART port %d\n", kgdb_port);
-		set_debug_traps();
-		breakpoint();
-	}
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void bcm1480_kgdb_interrupt(void)
-{
-	/*
-	 * Clear break-change status (allow some time for the remote
-	 * host to stop the break, since we would see another
-	 * interrupt on the end-of-break too)
-	 */
-	kstat.irqs[smp_processor_id()][kgdb_irq]++;
-	mdelay(500);
-	duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
-				M_DUART_RX_EN | M_DUART_TX_EN);
-	set_async_breakpoint(&get_irq_regs()->cp0_epc);
 }
 
-#endif 	/* CONFIG_KGDB */
-
 extern void bcm1480_mailbox_interrupt(void);
 
 static inline void dispatch_ip2(void)
@@ -462,11 +387,6 @@ asmlinkage void plat_irq_dispatch(void)
 		bcm1480_mailbox_interrupt();
 #endif
 
-#ifdef CONFIG_KGDB
-	else if (pending & CAUSEF_IP6)
-		bcm1480_kgdb_interrupt();		/* KGDB (uart 1) */
-#endif
-
 	else if (pending & CAUSEF_IP2)
 		dispatch_ip2();
 }
diff --git a/arch/mips/sibyte/cfe/setup.c b/arch/mips/sibyte/cfe/setup.c
index 33fce826f8bf..3de30f79db3f 100644
--- a/arch/mips/sibyte/cfe/setup.c
+++ b/arch/mips/sibyte/cfe/setup.c
@@ -59,10 +59,6 @@ int cfe_cons_handle;
 extern unsigned long initrd_start, initrd_end;
 #endif
 
-#ifdef CONFIG_KGDB
-extern int kgdb_port;
-#endif
-
 static void __noreturn cfe_linux_exit(void *arg)
 {
 	int warm = *(int *)arg;
@@ -74,7 +70,7 @@ static void __noreturn cfe_linux_exit(void *arg)
 		if (!reboot_smp) {
 			/* Get CPU 0 to do the cfe_exit */
 			reboot_smp = 1;
-			smp_call_function(cfe_linux_exit, arg, 1, 0);
+			smp_call_function(cfe_linux_exit, arg, 0);
 		}
 	} else {
 		printk("Passing control back to CFE...\n");
@@ -246,9 +242,6 @@ void __init prom_init(void)
 	int argc = fw_arg0;
 	char **envp = (char **) fw_arg2;
 	int *prom_vec = (int *) fw_arg3;
-#ifdef CONFIG_KGDB
-	char *arg;
-#endif
 
 	_machine_restart   = cfe_linux_restart;
 	_machine_halt      = cfe_linux_halt;
@@ -309,13 +302,6 @@ void __init prom_init(void)
 		}
 	}
 
-#ifdef CONFIG_KGDB
-	if ((arg = strstr(arcs_cmdline, "kgdb=duart")) != NULL)
-		kgdb_port = (arg[10] == '0') ? 0 : 1;
-	else
-		kgdb_port = 1;
-#endif
-
 #ifdef CONFIG_BLK_DEV_INITRD
 	{
 		char *ptr;
diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index 28b012ab8dcb..66e3e3fb311f 100644
--- a/arch/mips/sibyte/common/sb_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -576,7 +576,8 @@ static int __init sbprof_tb_init(void)
 
 	tb_class = tbc;
 
-	dev = device_create(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0), "tb");
+	dev = device_create_drvdata(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0),
+				    NULL, "tb");
 	if (IS_ERR(dev)) {
 		err = PTR_ERR(dev);
 		goto out_class;
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index eac9065ffe0c..a5158483986e 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -57,16 +57,6 @@ static void sb1250_set_affinity(unsigned int irq, cpumask_t mask);
 extern unsigned long ldt_eoi_space;
 #endif
 
-#ifdef CONFIG_KGDB
-static int kgdb_irq;
-
-/* Default to UART1 */
-int kgdb_port = 1;
-#ifdef CONFIG_SERIAL_SB1250_DUART
-extern char sb1250_duart_present[];
-#endif
-#endif
-
 static struct irq_chip sb1250_irq_type = {
 	.name = "SB1250-IMR",
 	.ack = ack_sb1250_irq,
@@ -313,55 +303,10 @@ void __init arch_init_irq(void)
 	 * does its own management of IP7.
 	 */
 
-#ifdef CONFIG_KGDB
-	imask |= STATUSF_IP6;
-#endif
 	/* Enable necessary IPs, disable the rest */
 	change_c0_status(ST0_IM, imask);
-
-#ifdef CONFIG_KGDB
-	if (kgdb_flag) {
-		kgdb_irq = K_INT_UART_0 + kgdb_port;
-
-#ifdef CONFIG_SERIAL_SB1250_DUART
-		sb1250_duart_present[kgdb_port] = 0;
-#endif
-		/* Setup uart 1 settings, mapper */
-		__raw_writeq(M_DUART_IMR_BRK,
-			     IOADDR(A_DUART_IMRREG(kgdb_port)));
-
-		__raw_writeq(IMR_IP6_VAL,
-			     IOADDR(A_IMR_REGISTER(0,
-						   R_IMR_INTERRUPT_MAP_BASE) +
-				    (kgdb_irq << 3)));
-		sb1250_unmask_irq(0, kgdb_irq);
-	}
-#endif
-}
-
-#ifdef CONFIG_KGDB
-
-#include <linux/delay.h>
-
-#define duart_out(reg, val)     csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)           csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-static void sb1250_kgdb_interrupt(void)
-{
-	/*
-	 * Clear break-change status (allow some time for the remote
-	 * host to stop the break, since we would see another
-	 * interrupt on the end-of-break too)
-	 */
-	kstat_this_cpu.irqs[kgdb_irq]++;
-	mdelay(500);
-	duart_out(R_DUART_CMD, V_DUART_MISC_CMD_RESET_BREAK_INT |
-				M_DUART_RX_EN | M_DUART_TX_EN);
-	set_async_breakpoint(&get_irq_regs()->cp0_epc);
 }
 
-#endif 	/* CONFIG_KGDB */
-
 extern void sb1250_mailbox_interrupt(void);
 
 static inline void dispatch_ip2(void)
@@ -407,11 +352,6 @@ asmlinkage void plat_irq_dispatch(void)
 		sb1250_mailbox_interrupt();
 #endif
 
-#ifdef CONFIG_KGDB
-	else if (pending & CAUSEF_IP6)			/* KGDB (uart 1) */
-		sb1250_kgdb_interrupt();
-#endif
-
 	else if (pending & CAUSEF_IP2)
 		dispatch_ip2();
 	else
diff --git a/arch/mips/sibyte/sb1250/prom.c b/arch/mips/sibyte/sb1250/prom.c
index cf8f6b3de86c..65b1af66b674 100644
--- a/arch/mips/sibyte/sb1250/prom.c
+++ b/arch/mips/sibyte/sb1250/prom.c
@@ -66,7 +66,7 @@ static void prom_linux_exit(void)
 {
 #ifdef CONFIG_SMP
 	if (smp_processor_id()) {
-		smp_call_function(prom_cpu0_exit, NULL, 1, 1);
+		smp_call_function(prom_cpu0_exit, NULL, 1);
 	}
 #endif
 	while(1);
diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile
index 255d692bfa18..f18ba9201bbc 100644
--- a/arch/mips/sibyte/swarm/Makefile
+++ b/arch/mips/sibyte/swarm/Makefile
@@ -1,4 +1,3 @@
 obj-y				:= setup.o rtc_xicor1241.o rtc_m41t81.o
 
 obj-$(CONFIG_I2C_BOARDINFO)	+= swarm-i2c.o
-obj-$(CONFIG_KGDB)		+= dbg_io.o
diff --git a/arch/mips/sibyte/swarm/dbg_io.c b/arch/mips/sibyte/swarm/dbg_io.c
deleted file mode 100644
index b97ae3048482..000000000000
--- a/arch/mips/sibyte/swarm/dbg_io.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * kgdb debug routines for SiByte boards.
- *
- * Copyright (C) 2001 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-/* -------------------- BEGINNING OF CONFIG --------------------- */
-
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_uart.h>
-#include <asm/sibyte/sb1250_int.h>
-#include <asm/addrspace.h>
-
-/*
- * We use the second serial port for kgdb traffic.
- * 	115200, 8, N, 1.
- */
-
-#define	BAUD_RATE		115200
-#define	CLK_DIVISOR		V_DUART_BAUD_RATE(BAUD_RATE)
-#define	DATA_BITS		V_DUART_BITS_PER_CHAR_8		/* or 7    */
-#define	PARITY			V_DUART_PARITY_MODE_NONE	/* or even */
-#define	STOP_BITS		M_DUART_STOP_BIT_LEN_1		/* or 2    */
-
-static int duart_initialized = 0;	/* 0: need to be init'ed by kgdb */
-
-/* -------------------- END OF CONFIG --------------------- */
-extern int kgdb_port;
-
-#define	duart_out(reg, val)	csr_out32(val, IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-#define duart_in(reg)		csr_in32(IOADDR(A_DUART_CHANREG(kgdb_port, reg)))
-
-void putDebugChar(unsigned char c);
-unsigned char getDebugChar(void);
-static void
-duart_init(int clk_divisor, int data, int parity, int stop)
-{
-	duart_out(R_DUART_MODE_REG_1, data | parity);
-	duart_out(R_DUART_MODE_REG_2, stop);
-	duart_out(R_DUART_CLK_SEL, clk_divisor);
-
-	duart_out(R_DUART_CMD, M_DUART_RX_EN | M_DUART_TX_EN);	/* enable rx and tx */
-}
-
-void
-putDebugChar(unsigned char c)
-{
-	if (!duart_initialized) {
-		duart_initialized = 1;
-		duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
-	}
-	while ((duart_in(R_DUART_STATUS) & M_DUART_TX_RDY) == 0);
-	duart_out(R_DUART_TX_HOLD, c);
-}
-
-unsigned char
-getDebugChar(void)
-{
-	if (!duart_initialized) {
-		duart_initialized = 1;
-		duart_init(CLK_DIVISOR, DATA_BITS, PARITY, STOP_BITS);
-	}
-	while ((duart_in(R_DUART_STATUS) & M_DUART_RX_RDY) == 0) ;
-	return duart_in(R_DUART_RX_HOLD);
-}
-
diff --git a/arch/mips/sni/setup.c b/arch/mips/sni/setup.c
index 5484e1c62054..a49272ce7ef5 100644
--- a/arch/mips/sni/setup.c
+++ b/arch/mips/sni/setup.c
@@ -116,7 +116,6 @@ void __init plat_mem_setup(void)
 	/*
 	 * Setup (E)ISA I/O memory access stuff
 	 */
-	isa_slot_offset = CKSEG1ADDR(0xb0000000);
 #ifdef CONFIG_EISA
 	EISA_bus = 1;
 #endif
diff --git a/arch/mips/tx4927/Kconfig b/arch/mips/tx4927/Kconfig
deleted file mode 100644
index 5fbbe12e0fc1..000000000000
--- a/arch/mips/tx4927/Kconfig
+++ /dev/null
@@ -1,3 +0,0 @@
-config TOSHIBA_FPCIB0
-	bool "FPCIB0 Backplane Support"
-	depends on TOSHIBA_RBTX4927
diff --git a/arch/mips/tx4927/common/Makefile b/arch/mips/tx4927/common/Makefile
deleted file mode 100644
index a7fe76a64964..000000000000
--- a/arch/mips/tx4927/common/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for common code for Toshiba TX4927 based systems
-#
-
-obj-y	+= tx4927_prom.o tx4927_irq.o
-
-obj-$(CONFIG_TOSHIBA_FPCIB0)	   += smsc_fdc37m81x.o
-obj-$(CONFIG_KGDB)                 += tx4927_dbgio.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4927/common/smsc_fdc37m81x.c b/arch/mips/tx4927/common/smsc_fdc37m81x.c
deleted file mode 100644
index 33f517bc9a08..000000000000
--- a/arch/mips/tx4927/common/smsc_fdc37m81x.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Interface for smsc fdc48m81x Super IO chip
- *
- * Author: MontaVista Software, Inc. source@mvista.com
- *
- * 2001-2003 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Copyright 2004 (c) MontaVista Software, Inc.
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/tx4927/smsc_fdc37m81x.h>
-
-#define DEBUG
-
-/* Common Registers */
-#define SMSC_FDC37M81X_CONFIG_INDEX  0x00
-#define SMSC_FDC37M81X_CONFIG_DATA   0x01
-#define SMSC_FDC37M81X_CONF          0x02
-#define SMSC_FDC37M81X_INDEX         0x03
-#define SMSC_FDC37M81X_DNUM          0x07
-#define SMSC_FDC37M81X_DID           0x20
-#define SMSC_FDC37M81X_DREV          0x21
-#define SMSC_FDC37M81X_PCNT          0x22
-#define SMSC_FDC37M81X_PMGT          0x23
-#define SMSC_FDC37M81X_OSC           0x24
-#define SMSC_FDC37M81X_CONFPA0       0x26
-#define SMSC_FDC37M81X_CONFPA1       0x27
-#define SMSC_FDC37M81X_TEST4         0x2B
-#define SMSC_FDC37M81X_TEST5         0x2C
-#define SMSC_FDC37M81X_TEST1         0x2D
-#define SMSC_FDC37M81X_TEST2         0x2E
-#define SMSC_FDC37M81X_TEST3         0x2F
-
-/* Logical device numbers */
-#define SMSC_FDC37M81X_FDD           0x00
-#define SMSC_FDC37M81X_SERIAL1       0x04
-#define SMSC_FDC37M81X_SERIAL2       0x05
-#define SMSC_FDC37M81X_KBD           0x07
-
-/* Logical device Config Registers */
-#define SMSC_FDC37M81X_ACTIVE        0x30
-#define SMSC_FDC37M81X_BASEADDR0     0x60
-#define SMSC_FDC37M81X_BASEADDR1     0x61
-#define SMSC_FDC37M81X_INT           0x70
-#define SMSC_FDC37M81X_INT2          0x72
-#define SMSC_FDC37M81X_MODE          0xF0
-
-/* Chip Config Values */
-#define SMSC_FDC37M81X_CONFIG_ENTER  0x55
-#define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
-#define SMSC_FDC37M81X_CHIP_ID       0x4d
-
-static unsigned long g_smsc_fdc37m81x_base = 0;
-
-static inline unsigned char smsc_fdc37m81x_rd(unsigned char index)
-{
-	outb(index, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX);
-
-	return inb(g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_DATA);
-}
-
-static inline void smsc_dc37m81x_wr(unsigned char index, unsigned char data)
-{
-	outb(index, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX);
-	outb(data, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_DATA);
-}
-
-void smsc_fdc37m81x_config_beg(void)
-{
-	if (g_smsc_fdc37m81x_base) {
-		outb(SMSC_FDC37M81X_CONFIG_ENTER,
-		     g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX);
-	}
-}
-
-void smsc_fdc37m81x_config_end(void)
-{
-	if (g_smsc_fdc37m81x_base)
-		outb(SMSC_FDC37M81X_CONFIG_EXIT,
-		     g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX);
-}
-
-u8 smsc_fdc37m81x_config_get(u8 reg)
-{
-	u8 val = 0;
-
-	if (g_smsc_fdc37m81x_base)
-		val = smsc_fdc37m81x_rd(reg);
-
-	return val;
-}
-
-void smsc_fdc37m81x_config_set(u8 reg, u8 val)
-{
-	if (g_smsc_fdc37m81x_base)
-		smsc_dc37m81x_wr(reg, val);
-}
-
-unsigned long __init smsc_fdc37m81x_init(unsigned long port)
-{
-	const int field = sizeof(unsigned long) * 2;
-	u8 chip_id;
-
-	if (g_smsc_fdc37m81x_base)
-		printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n",
-		       field, g_smsc_fdc37m81x_base);
-
-	g_smsc_fdc37m81x_base = port;
-
-	smsc_fdc37m81x_config_beg();
-
-	chip_id = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DID);
-	if (chip_id == SMSC_FDC37M81X_CHIP_ID)
-		smsc_fdc37m81x_config_end();
-	else {
-		printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n",
-		       chip_id);
-		g_smsc_fdc37m81x_base = 0;
-	}
-
-	return g_smsc_fdc37m81x_base;
-}
-
-#ifdef DEBUG
-void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg)
-{
-	printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg,
-	       smsc_fdc37m81x_rd(reg));
-}
-
-void smsc_fdc37m81x_config_dump(void)
-{
-	u8 orig;
-	char *fname = "smsc_fdc37m81x_config_dump()";
-
-	smsc_fdc37m81x_config_beg();
-
-	orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM);
-
-	printk("%s: common\n", fname);
-	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
-				       SMSC_FDC37M81X_DNUM);
-	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
-				       SMSC_FDC37M81X_DID);
-	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
-				       SMSC_FDC37M81X_DREV);
-	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
-				       SMSC_FDC37M81X_PCNT);
-	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
-				       SMSC_FDC37M81X_PMGT);
-
-	printk("%s: keyboard\n", fname);
-	smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD);
-	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
-				       SMSC_FDC37M81X_ACTIVE);
-	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
-				       SMSC_FDC37M81X_INT);
-	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
-				       SMSC_FDC37M81X_INT2);
-	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
-				       SMSC_FDC37M81X_LDCR_F0);
-
-	smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, orig);
-
-	smsc_fdc37m81x_config_end();
-}
-#endif
diff --git a/arch/mips/tx4927/common/tx4927_dbgio.c b/arch/mips/tx4927/common/tx4927_dbgio.c
deleted file mode 100644
index d8423e001b2d..000000000000
--- a/arch/mips/tx4927/common/tx4927_dbgio.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/arch/mips/tx4927/common/tx4927_dbgio.c
- *
- * kgdb interface for gdb
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2001-2002 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-
-u8 getDebugChar(void)
-{
-	extern u8 txx9_sio_kdbg_rd(void);
-	return (txx9_sio_kdbg_rd());
-}
-
-
-int putDebugChar(u8 byte)
-{
-	extern int txx9_sio_kdbg_wr( u8 ch );
-	return (txx9_sio_kdbg_wr(byte));
-}
diff --git a/arch/mips/tx4927/common/tx4927_irq.c b/arch/mips/tx4927/common/tx4927_irq.c
deleted file mode 100644
index 0aabd57fdad2..000000000000
--- a/arch/mips/tx4927/common/tx4927_irq.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Common tx4927 irq handler
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/tx4927/tx4927.h>
-#ifdef CONFIG_TOSHIBA_RBTX4927
-#include <asm/tx4927/toshiba_rbtx4927.h>
-#endif
-
-void __init tx4927_irq_init(void)
-{
-	mips_cpu_irq_init();
-	txx9_irq_init(TX4927_IRC_REG);
-	set_irq_chained_handler(TX4927_IRQ_NEST_PIC_ON_CP0, handle_simple_irq);
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
-	if (pending & STATUSF_IP7)			/* cpu timer */
-		do_IRQ(TX4927_IRQ_CPU_TIMER);
-	else if (pending & STATUSF_IP2) {		/* tx4927 pic */
-		int irq = txx9_irq();
-#ifdef CONFIG_TOSHIBA_RBTX4927
-		if (irq == TX4927_IRQ_NEST_EXT_ON_PIC)
-			irq = toshiba_rbtx4927_irq_nested(irq);
-#endif
-		if (unlikely(irq < 0)) {
-			spurious_interrupt();
-			return;
-		}
-		do_IRQ(irq);
-	} else if (pending & STATUSF_IP0)		/* user line 0 */
-		do_IRQ(TX4927_IRQ_USER0);
-	else if (pending & STATUSF_IP1)			/* user line 1 */
-		do_IRQ(TX4927_IRQ_USER1);
-	else
-		spurious_interrupt();
-}
diff --git a/arch/mips/tx4927/common/tx4927_prom.c b/arch/mips/tx4927/common/tx4927_prom.c
deleted file mode 100644
index 6eed53d8f386..000000000000
--- a/arch/mips/tx4927/common/tx4927_prom.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * linux/arch/mips/tx4927/common/tx4927_prom.c
- *
- * common tx4927 memory interface
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2001-2002 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/tx4927/tx4927.h>
-
-static unsigned int __init tx4927_process_sdccr(unsigned long addr)
-{
-	u64 val;
-	unsigned int sdccr_ce;
-	unsigned int sdccr_bs;
-	unsigned int sdccr_rs;
-	unsigned int sdccr_cs;
-	unsigned int sdccr_mw;
-	unsigned int bs = 0;
-	unsigned int rs = 0;
-	unsigned int cs = 0;
-	unsigned int mw = 0;
-	unsigned int msize = 0;
-
-	val = __raw_readq((void __iomem *)addr);
-
-	/* MVMCP -- need #defs for these bits masks */
-	sdccr_ce = ((val & (1 << 10)) >> 10);
-	sdccr_bs = ((val & (1 << 8)) >> 8);
-	sdccr_rs = ((val & (3 << 5)) >> 5);
-	sdccr_cs = ((val & (3 << 2)) >> 2);
-	sdccr_mw = ((val & (1 << 0)) >> 0);
-
-	if (sdccr_ce) {
-		switch (sdccr_bs) {
-		case 0:{
-				bs = 2;
-				break;
-			}
-		case 1:{
-				bs = 4;
-				break;
-			}
-		}
-		switch (sdccr_rs) {
-		case 0:{
-				rs = 2048;
-				break;
-			}
-		case 1:{
-				rs = 4096;
-				break;
-			}
-		case 2:{
-				rs = 8192;
-				break;
-			}
-		case 3:{
-				rs = 0;
-				break;
-			}
-		}
-		switch (sdccr_cs) {
-		case 0:{
-				cs = 256;
-				break;
-			}
-		case 1:{
-				cs = 512;
-				break;
-			}
-		case 2:{
-				cs = 1024;
-				break;
-			}
-		case 3:{
-				cs = 2048;
-				break;
-			}
-		}
-		switch (sdccr_mw) {
-		case 0:{
-				mw = 8;
-				break;
-			}	/* 8 bytes = 64 bits */
-		case 1:{
-				mw = 4;
-				break;
-			}	/* 4 bytes = 32 bits */
-		}
-	}
-
-	/*            bytes per chip     MB per chip      num chips */
-	msize = (((rs * cs * mw) / (1024 * 1024)) * bs);
-
-	return (msize);
-}
-
-
-unsigned int __init tx4927_get_mem_size(void)
-{
-	unsigned int c0;
-	unsigned int c1;
-	unsigned int c2;
-	unsigned int c3;
-	unsigned int total;
-
-	/* MVMCP -- need #defs for these registers */
-	c0 = tx4927_process_sdccr(0xff1f8000);
-	c1 = tx4927_process_sdccr(0xff1f8008);
-	c2 = tx4927_process_sdccr(0xff1f8010);
-	c3 = tx4927_process_sdccr(0xff1f8018);
-	total = c0 + c1 + c2 + c3;
-
-	return (total);
-}
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/Makefile b/arch/mips/tx4927/toshiba_rbtx4927/Makefile
deleted file mode 100644
index 13f96725d772..000000000000
--- a/arch/mips/tx4927/toshiba_rbtx4927/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-obj-y	+= toshiba_rbtx4927_prom.o
-obj-y	+= toshiba_rbtx4927_setup.o
-obj-y	+= toshiba_rbtx4927_irq.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
deleted file mode 100644
index 6d31f2a98abf..000000000000
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
+++ /dev/null
@@ -1,428 +0,0 @@
-/*
- * linux/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_irq.c
- *
- * Toshiba RBTX4927 specific interrupt handlers
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2001-2002 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-/*
-IRQ  Device
-00   RBTX4927-ISA/00
-01   RBTX4927-ISA/01 PS2/Keyboard
-02   RBTX4927-ISA/02 Cascade RBTX4927-ISA (irqs 8-15)
-03   RBTX4927-ISA/03
-04   RBTX4927-ISA/04
-05   RBTX4927-ISA/05
-06   RBTX4927-ISA/06
-07   RBTX4927-ISA/07
-08   RBTX4927-ISA/08
-09   RBTX4927-ISA/09
-10   RBTX4927-ISA/10
-11   RBTX4927-ISA/11
-12   RBTX4927-ISA/12 PS2/Mouse (not supported at this time)
-13   RBTX4927-ISA/13
-14   RBTX4927-ISA/14 IDE
-15   RBTX4927-ISA/15
-
-16   TX4927-CP0/00 Software 0
-17   TX4927-CP0/01 Software 1
-18   TX4927-CP0/02 Cascade TX4927-CP0
-19   TX4927-CP0/03 Multiplexed -- do not use
-20   TX4927-CP0/04 Multiplexed -- do not use
-21   TX4927-CP0/05 Multiplexed -- do not use
-22   TX4927-CP0/06 Multiplexed -- do not use
-23   TX4927-CP0/07 CPU TIMER
-
-24   TX4927-PIC/00
-25   TX4927-PIC/01
-26   TX4927-PIC/02
-27   TX4927-PIC/03 Cascade RBTX4927-IOC
-28   TX4927-PIC/04
-29   TX4927-PIC/05 RBTX4927 RTL-8019AS ethernet
-30   TX4927-PIC/06
-31   TX4927-PIC/07
-32   TX4927-PIC/08 TX4927 SerialIO Channel 0
-33   TX4927-PIC/09 TX4927 SerialIO Channel 1
-34   TX4927-PIC/10
-35   TX4927-PIC/11
-36   TX4927-PIC/12
-37   TX4927-PIC/13
-38   TX4927-PIC/14
-39   TX4927-PIC/15
-40   TX4927-PIC/16 TX4927 PCI PCI-C
-41   TX4927-PIC/17
-42   TX4927-PIC/18
-43   TX4927-PIC/19
-44   TX4927-PIC/20
-45   TX4927-PIC/21
-46   TX4927-PIC/22 TX4927 PCI PCI-ERR
-47   TX4927-PIC/23 TX4927 PCI PCI-PMA (not used)
-48   TX4927-PIC/24
-49   TX4927-PIC/25
-50   TX4927-PIC/26
-51   TX4927-PIC/27
-52   TX4927-PIC/28
-53   TX4927-PIC/29
-54   TX4927-PIC/30
-55   TX4927-PIC/31
-
-56 RBTX4927-IOC/00 FPCIB0 PCI-D PJ4/A PJ5/B SB/C PJ6/D PJ7/A (SouthBridge/NotUsed)        [RTL-8139=PJ4]
-57 RBTX4927-IOC/01 FPCIB0 PCI-C PJ4/D PJ5/A SB/B PJ6/C PJ7/D (SouthBridge/NotUsed)        [RTL-8139=PJ5]
-58 RBTX4927-IOC/02 FPCIB0 PCI-B PJ4/C PJ5/D SB/A PJ6/B PJ7/C (SouthBridge/IDE/pin=1,INTR) [RTL-8139=NotSupported]
-59 RBTX4927-IOC/03 FPCIB0 PCI-A PJ4/B PJ5/C SB/D PJ6/A PJ7/B (SouthBridge/USB/pin=4)      [RTL-8139=PJ6]
-60 RBTX4927-IOC/04
-61 RBTX4927-IOC/05
-62 RBTX4927-IOC/06
-63 RBTX4927-IOC/07
-
-NOTES:
-SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
-SouthBridge/ISA/pin=0 no pci irq used by this device
-SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR via ISA IRQ14
-SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
-SouthBridge/PMC/pin=0 no pci irq used by this device
-SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
-SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
-JP7 is not bus master -- do NOT use -- only 4 pci bus master's allowed -- SouthBridge, JP4, JP5, JP6
-*/
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/timex.h>
-#include <asm/bootinfo.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/wbflush.h>
-#include <linux/bootmem.h>
-#include <linux/blkdev.h>
-#ifdef CONFIG_TOSHIBA_FPCIB0
-#include <asm/i8259.h>
-#include <asm/tx4927/smsc_fdc37m81x.h>
-#endif
-#include <asm/tx4927/toshiba_rbtx4927.h>
-
-
-#undef TOSHIBA_RBTX4927_IRQ_DEBUG
-
-#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG
-#define TOSHIBA_RBTX4927_IRQ_NONE        0x00000000
-
-#define TOSHIBA_RBTX4927_IRQ_INFO          ( 1 <<  0 )
-#define TOSHIBA_RBTX4927_IRQ_WARN          ( 1 <<  1 )
-#define TOSHIBA_RBTX4927_IRQ_EROR          ( 1 <<  2 )
-
-#define TOSHIBA_RBTX4927_IRQ_IOC_INIT      ( 1 << 10 )
-#define TOSHIBA_RBTX4927_IRQ_IOC_ENABLE    ( 1 << 13 )
-#define TOSHIBA_RBTX4927_IRQ_IOC_DISABLE   ( 1 << 14 )
-
-#define TOSHIBA_RBTX4927_SETUP_ALL         0xffffffff
-#endif
-
-
-#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG
-static const u32 toshiba_rbtx4927_irq_debug_flag =
-    (TOSHIBA_RBTX4927_IRQ_NONE | TOSHIBA_RBTX4927_IRQ_INFO |
-     TOSHIBA_RBTX4927_IRQ_WARN | TOSHIBA_RBTX4927_IRQ_EROR
-//                                                 | TOSHIBA_RBTX4927_IRQ_IOC_INIT
-//                                                 | TOSHIBA_RBTX4927_IRQ_IOC_ENABLE
-//                                                 | TOSHIBA_RBTX4927_IRQ_IOC_DISABLE
-    );
-#endif
-
-
-#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG
-#define TOSHIBA_RBTX4927_IRQ_DPRINTK(flag,str...) \
-        if ( (toshiba_rbtx4927_irq_debug_flag) & (flag) ) \
-        { \
-           char tmp[100]; \
-           sprintf( tmp, str ); \
-           printk( "%s(%s:%u)::%s", __func__, __FILE__, __LINE__, tmp ); \
-        }
-#else
-#define TOSHIBA_RBTX4927_IRQ_DPRINTK(flag, str...)
-#endif
-
-
-
-
-#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG   0
-#define TOSHIBA_RBTX4927_IRQ_IOC_RAW_END   7
-
-#define TOSHIBA_RBTX4927_IRQ_IOC_BEG  ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_BEG)	/* 56 */
-#define TOSHIBA_RBTX4927_IRQ_IOC_END  ((TX4927_IRQ_PIC_END+1)+TOSHIBA_RBTX4927_IRQ_IOC_RAW_END)	/* 63 */
-
-#define TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC TX4927_IRQ_NEST_EXT_ON_PIC
-#define TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC (TOSHIBA_RBTX4927_IRQ_IOC_BEG+2)
-
-extern int tx4927_using_backplane;
-
-static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq);
-static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq);
-
-#define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC"
-static struct irq_chip toshiba_rbtx4927_irq_ioc_type = {
-	.name = TOSHIBA_RBTX4927_IOC_NAME,
-	.ack = toshiba_rbtx4927_irq_ioc_disable,
-	.mask = toshiba_rbtx4927_irq_ioc_disable,
-	.mask_ack = toshiba_rbtx4927_irq_ioc_disable,
-	.unmask = toshiba_rbtx4927_irq_ioc_enable,
-};
-#define TOSHIBA_RBTX4927_IOC_INTR_ENAB (void __iomem *)0xbc002000UL
-#define TOSHIBA_RBTX4927_IOC_INTR_STAT (void __iomem *)0xbc002006UL
-
-
-u32 bit2num(u32 num)
-{
-	u32 i;
-
-	for (i = 0; i < (sizeof(num) * 8); i++) {
-		if (num & (1 << i)) {
-			return (i);
-		}
-	}
-	return (0);
-}
-
-int toshiba_rbtx4927_irq_nested(int sw_irq)
-{
-	u32 level3;
-
-	level3 = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f;
-	if (level3) {
-		sw_irq = TOSHIBA_RBTX4927_IRQ_IOC_BEG + bit2num(level3);
-		if (sw_irq != TOSHIBA_RBTX4927_IRQ_NEST_ISA_ON_IOC) {
-			goto RETURN;
-		}
-	}
-#ifdef CONFIG_TOSHIBA_FPCIB0
-	if (tx4927_using_backplane) {
-		int irq = i8259_irq();
-		if (irq >= 0)
-			sw_irq = irq;
-	}
-#endif
-
-      RETURN:
-	return (sw_irq);
-}
-
-static struct irqaction toshiba_rbtx4927_irq_ioc_action = {
-	.handler	= no_action,
-	.flags		= IRQF_SHARED,
-	.mask		= CPU_MASK_NONE,
-	.name		= TOSHIBA_RBTX4927_IOC_NAME
-};
-
-
-/**********************************************************************************/
-/* Functions for ioc                                                              */
-/**********************************************************************************/
-
-
-static void __init toshiba_rbtx4927_irq_ioc_init(void)
-{
-	int i;
-
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_IOC_INIT,
-				     "beg=%d end=%d\n",
-				     TOSHIBA_RBTX4927_IRQ_IOC_BEG,
-				     TOSHIBA_RBTX4927_IRQ_IOC_END);
-
-	for (i = TOSHIBA_RBTX4927_IRQ_IOC_BEG;
-	     i <= TOSHIBA_RBTX4927_IRQ_IOC_END; i++)
-		set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type,
-					 handle_level_irq);
-
-	setup_irq(TOSHIBA_RBTX4927_IRQ_NEST_IOC_ON_PIC,
-		  &toshiba_rbtx4927_irq_ioc_action);
-}
-
-static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq)
-{
-	volatile unsigned char v;
-
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_IOC_ENABLE,
-				     "irq=%d\n", irq);
-
-	if (irq < TOSHIBA_RBTX4927_IRQ_IOC_BEG
-	    || irq > TOSHIBA_RBTX4927_IRQ_IOC_END) {
-		TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR,
-					     "bad irq=%d\n", irq);
-		panic("\n");
-	}
-
-	v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB);
-	v |= (1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG));
-	writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB);
-}
-
-
-static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq)
-{
-	volatile unsigned char v;
-
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_IOC_DISABLE,
-				     "irq=%d\n", irq);
-
-	if (irq < TOSHIBA_RBTX4927_IRQ_IOC_BEG
-	    || irq > TOSHIBA_RBTX4927_IRQ_IOC_END) {
-		TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_EROR,
-					     "bad irq=%d\n", irq);
-		panic("\n");
-	}
-
-	v = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB);
-	v &= ~(1 << (irq - TOSHIBA_RBTX4927_IRQ_IOC_BEG));
-	writeb(v, TOSHIBA_RBTX4927_IOC_INTR_ENAB);
-	mmiowb();
-}
-
-
-void __init arch_init_irq(void)
-{
-	extern void tx4927_irq_init(void);
-
-	tx4927_irq_init();
-	toshiba_rbtx4927_irq_ioc_init();
-#ifdef CONFIG_TOSHIBA_FPCIB0
-	if (tx4927_using_backplane)
-		init_i8259_irqs();
-#endif
-	/* Onboard 10M Ether: High Active */
-	set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH);
-
-	wbflush();
-}
-
-void toshiba_rbtx4927_irq_dump(char *key)
-{
-#ifdef TOSHIBA_RBTX4927_IRQ_DEBUG
-	{
-		u32 i, j = 0;
-		for (i = 0; i < NR_IRQS; i++) {
-			if (strcmp(irq_desc[i].chip->name, "none")
-			    == 0)
-				continue;
-
-			if ((i >= 1)
-			    && (irq_desc[i - 1].chip->name ==
-				irq_desc[i].chip->name)) {
-				j++;
-			} else {
-				j = 0;
-			}
-			TOSHIBA_RBTX4927_IRQ_DPRINTK
-			    (TOSHIBA_RBTX4927_IRQ_INFO,
-			     "%s irq=0x%02x/%3d s=0x%08x h=0x%08x a=0x%08x ah=0x%08x d=%1d n=%s/%02d\n",
-			     key, i, i, irq_desc[i].status,
-			     (u32) irq_desc[i].chip,
-			     (u32) irq_desc[i].action,
-			     (u32) (irq_desc[i].action ? irq_desc[i].
-				    action->handler : 0),
-			     irq_desc[i].depth,
-			     irq_desc[i].chip->name, j);
-		}
-	}
-#endif
-}
-
-void toshiba_rbtx4927_irq_dump_pics(char *s)
-{
-	u32 level0_m;
-	u32 level0_s;
-	u32 level1_m;
-	u32 level1_s;
-	u32 level2;
-	u32 level2_p;
-	u32 level2_s;
-	u32 level3_m;
-	u32 level3_s;
-	u32 level4_m;
-	u32 level4_s;
-	u32 level5_m;
-	u32 level5_s;
-
-	if (s == NULL)
-		s = "null";
-
-	level0_m = (read_c0_status() & 0x0000ff00) >> 8;
-	level0_s = (read_c0_cause() & 0x0000ff00) >> 8;
-
-	level1_m = level0_m;
-	level1_s = level0_s & 0x87;
-
-	level2 = __raw_readl((void __iomem *)0xff1ff6a0UL);
-	level2_p = (((level2 & 0x10000)) ? 0 : 1);
-	level2_s = (((level2 & 0x1f) == 0x1f) ? 0 : (level2 & 0x1f));
-
-	level3_m = readb(TOSHIBA_RBTX4927_IOC_INTR_ENAB) & 0x1f;
-	level3_s = readb(TOSHIBA_RBTX4927_IOC_INTR_STAT) & 0x1f;
-
-	level4_m = inb(0x21);
-	outb(0x0A, 0x20);
-	level4_s = inb(0x20);
-
-	level5_m = inb(0xa1);
-	outb(0x0A, 0xa0);
-	level5_s = inb(0xa0);
-
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "dump_raw_pic() ");
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "cp0:m=0x%02x/s=0x%02x ", level0_m,
-				     level0_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "cp0:m=0x%02x/s=0x%02x ", level1_m,
-				     level1_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "pic:e=0x%02x/s=0x%02x ", level2_p,
-				     level2_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "ioc:m=0x%02x/s=0x%02x ", level3_m,
-				     level3_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "sbm:m=0x%02x/s=0x%02x ", level4_m,
-				     level4_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO,
-				     "sbs:m=0x%02x/s=0x%02x ", level5_m,
-				     level5_s);
-	TOSHIBA_RBTX4927_IRQ_DPRINTK(TOSHIBA_RBTX4927_IRQ_INFO, "[%s]\n",
-				     s);
-}
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c
deleted file mode 100644
index f3f86857beae..000000000000
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_prom.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * rbtx4927 specific prom routines
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2001-2002 MontaVista Software Inc.
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Manish Lachwani, mlachwani@mvista.com
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/cpu.h>
-#include <asm/tx4927/tx4927.h>
-
-void __init prom_init_cmdline(void)
-{
-	int argc = (int) fw_arg0;
-	char **argv = (char **) fw_arg1;
-	int i;			/* Always ignore the "-c" at argv[0] */
-
-	/* ignore all built-in args if any f/w args given */
-	if (argc > 1) {
-		*arcs_cmdline = '\0';
-	}
-
-	for (i = 1; i < argc; i++) {
-		if (i != 1) {
-			strcat(arcs_cmdline, " ");
-		}
-		strcat(arcs_cmdline, argv[i]);
-	}
-}
-
-void __init prom_init(void)
-{
-	extern int tx4927_get_mem_size(void);
-	extern char* toshiba_name;
-	int msize;
-
-	prom_init_cmdline();
-
-	if ((read_c0_prid() & 0xff) == PRID_REV_TX4927) {
-		mips_machtype = MACH_TOSHIBA_RBTX4927;
-		toshiba_name  = "TX4927";
-	} else {
-		mips_machtype = MACH_TOSHIBA_RBTX4937;
-		toshiba_name  = "TX4937";
-	}
-
-	msize = tx4927_get_mem_size();
-	add_memory_region(0, msize << 20, BOOT_MEM_RAM);
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-const char *get_system_type(void)
-{
-	return "Toshiba RBTX4927/RBTX4937";
-}
-
-char * __init prom_getcmdline(void)
-{
-        return &(arcs_cmdline[0]);
-}
-
diff --git a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c b/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
deleted file mode 100644
index 2203c77b2ce2..000000000000
--- a/arch/mips/tx4927/toshiba_rbtx4927/toshiba_rbtx4927_setup.c
+++ /dev/null
@@ -1,1001 +0,0 @@
-/*
- * Toshiba rbtx4927 specific setup
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2001-2002 MontaVista Software Inc.
- *
- * Copyright (C) 1996, 97, 2001, 04  Ralf Baechle (ralf@linux-mips.org)
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: RidgeRun, Inc.
- *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * Copyright 2002 MontaVista Software Inc.
- * Author: Michael Pruznick, michael_pruznick@mvista.com
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Manish Lachwani, mlachwani@mvista.com
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/txx9tmr.h>
-#ifdef CONFIG_TOSHIBA_FPCIB0
-#include <asm/tx4927/smsc_fdc37m81x.h>
-#endif
-#include <asm/tx4927/toshiba_rbtx4927.h>
-#ifdef CONFIG_PCI
-#include <asm/tx4927/tx4927_pci.h>
-#endif
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-
-#undef TOSHIBA_RBTX4927_SETUP_DEBUG
-
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-#define TOSHIBA_RBTX4927_SETUP_SETUP       ( 1 <<  4 )
-#define TOSHIBA_RBTX4927_SETUP_PCIBIOS     ( 1 <<  7 )
-#define TOSHIBA_RBTX4927_SETUP_PCI1        ( 1 <<  8 )
-#define TOSHIBA_RBTX4927_SETUP_PCI2        ( 1 <<  9 )
-
-#define TOSHIBA_RBTX4927_SETUP_ALL         0xffffffff
-#endif
-
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-static const u32 toshiba_rbtx4927_setup_debug_flag =
-    (TOSHIBA_RBTX4927_SETUP_SETUP |
-     | TOSHIBA_RBTX4927_SETUP_PCIBIOS | TOSHIBA_RBTX4927_SETUP_PCI1 |
-     TOSHIBA_RBTX4927_SETUP_PCI2);
-#endif
-
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-#define TOSHIBA_RBTX4927_SETUP_DPRINTK(flag,str...) \
-        if ( (toshiba_rbtx4927_setup_debug_flag) & (flag) ) \
-        { \
-           char tmp[100]; \
-           sprintf( tmp, str ); \
-           printk( "%s(%s:%u)::%s", __func__, __FILE__, __LINE__, tmp ); \
-        }
-#else
-#define TOSHIBA_RBTX4927_SETUP_DPRINTK(flag, str...)
-#endif
-
-/* These functions are used for rebooting or halting the machine*/
-extern void toshiba_rbtx4927_restart(char *command);
-extern void toshiba_rbtx4927_halt(void);
-extern void toshiba_rbtx4927_power_off(void);
-
-int tx4927_using_backplane = 0;
-
-extern void toshiba_rbtx4927_irq_setup(void);
-
-char *prom_getcmdline(void);
-
-#ifdef CONFIG_PCI
-#undef TX4927_SUPPORT_COMMAND_IO
-#undef  TX4927_SUPPORT_PCI_66
-int tx4927_cpu_clock = 100000000;	/* 100MHz */
-unsigned long mips_pci_io_base;
-unsigned long mips_pci_io_size;
-unsigned long mips_pci_mem_base;
-unsigned long mips_pci_mem_size;
-/* for legacy I/O, PCI I/O PCI Bus address must be 0 */
-unsigned long mips_pci_io_pciaddr = 0;
-unsigned long mips_memory_upper;
-static int tx4927_ccfg_toeon = 1;
-static int tx4927_pcic_trdyto = 0;	/* default: disabled */
-unsigned long tx4927_ce_base[8];
-void tx4927_reset_pci_pcic(void);
-int tx4927_pci66 = 0;		/* 0:auto */
-#endif
-
-char *toshiba_name = "";
-
-#ifdef CONFIG_PCI
-extern struct pci_controller tx4927_controller;
-
-static struct pci_dev *fake_pci_dev(struct pci_controller *hose,
-				    int top_bus, int busnr, int devfn)
-{
-	static struct pci_dev dev;
-	static struct pci_bus bus;
-
-	dev.sysdata = (void *)hose;
-	dev.devfn = devfn;
-	bus.number = busnr;
-	bus.ops = hose->pci_ops;
-	bus.parent = NULL;
-	dev.bus = &bus;
-
-	return &dev;
-}
-
-#define EARLY_PCI_OP(rw, size, type)                                    \
-static int early_##rw##_config_##size(struct pci_controller *hose,      \
-        int top_bus, int bus, int devfn, int offset, type value)        \
-{                                                                       \
-        return pci_##rw##_config_##size(                                \
-                fake_pci_dev(hose, top_bus, bus, devfn),                \
-                offset, value);                                         \
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, dword, u32)
-
-static int __init tx4927_pcibios_init(void)
-{
-	unsigned int id;
-	u32 pci_devfn;
-	int devfn_start = 0;
-	int devfn_stop = 0xff;
-	int busno = 0; /* One bus on the Toshiba */
-	struct pci_controller *hose = &tx4927_controller;
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				       "-\n");
-
-	for (pci_devfn = devfn_start; pci_devfn < devfn_stop; pci_devfn++) {
-		early_read_config_dword(hose, busno, busno, pci_devfn,
-					PCI_VENDOR_ID, &id);
-
-		if (id == 0xffffffff) {
-			continue;
-		}
-
-		if (id == 0x94601055) {
-			u8 v08_64;
-			u32 v32_b0;
-			u8 v08_e1;
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-			char *s = " sb/isa --";
-#endif
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s beg\n",
-			     s);
-
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x64, &v08_64);
-			early_read_config_dword(hose, busno, busno,
-						pci_devfn, 0xb0, &v32_b0);
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0xe1, &v08_e1);
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x64 = 0x%02x\n", s, v08_64);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0xb0 = 0x%02x\n", s, v32_b0);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0xe1 = 0x%02x\n", s, v08_e1);
-
-			/* serial irq control */
-			v08_64 = 0xd0;
-
-			/* serial irq pin */
-			v32_b0 |= 0x00010000;
-
-			/* ide irq on isa14 */
-			v08_e1 &= 0xf0;
-			v08_e1 |= 0x0d;
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x64 = 0x%02x\n", s, v08_64);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0xb0 = 0x%02x\n", s, v32_b0);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0xe1 = 0x%02x\n", s, v08_e1);
-
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x64, v08_64);
-			early_write_config_dword(hose, busno, busno,
-						 pci_devfn, 0xb0, v32_b0);
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0xe1, v08_e1);
-
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-			{
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x64,
-						       &v08_64);
-				early_read_config_dword(hose, busno, busno,
-							pci_devfn, 0xb0,
-							&v32_b0);
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0xe1,
-						       &v08_e1);
-
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x64 = 0x%02x\n", s, v08_64);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0xb0 = 0x%02x\n", s, v32_b0);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0xe1 = 0x%02x\n", s, v08_e1);
-			}
-#endif
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s end\n",
-			     s);
-		}
-
-		if (id == 0x91301055) {
-			u8 v08_04;
-			u8 v08_09;
-			u8 v08_41;
-			u8 v08_43;
-			u8 v08_5c;
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-			char *s = " sb/ide --";
-#endif
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s beg\n",
-			     s);
-
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x04, &v08_04);
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x09, &v08_09);
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x41, &v08_41);
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x43, &v08_43);
-			early_read_config_byte(hose, busno, busno,
-					       pci_devfn, 0x5c, &v08_5c);
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x04 = 0x%02x\n", s, v08_04);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x09 = 0x%02x\n", s, v08_09);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x41 = 0x%02x\n", s, v08_41);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x43 = 0x%02x\n", s, v08_43);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s beg 0x5c = 0x%02x\n", s, v08_5c);
-
-			/* enable ide master/io */
-			v08_04 |= (PCI_COMMAND_MASTER | PCI_COMMAND_IO);
-
-			/* enable ide native mode */
-			v08_09 |= 0x05;
-
-			/* enable primary ide */
-			v08_41 |= 0x80;
-
-			/* enable secondary ide */
-			v08_43 |= 0x80;
-
-			/*
-			 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
-			 *
-			 * This line of code is intended to provide the user with a work
-			 * around solution to the anomalies cited in SMSC's anomaly sheet
-			 * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"".
-			 *
-			 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
-			 */
-			v08_5c |= 0x01;
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x04 = 0x%02x\n", s, v08_04);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x09 = 0x%02x\n", s, v08_09);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x41 = 0x%02x\n", s, v08_41);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x43 = 0x%02x\n", s, v08_43);
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-			     ":%s mid 0x5c = 0x%02x\n", s, v08_5c);
-
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x5c, v08_5c);
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x04, v08_04);
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x09, v08_09);
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x41, v08_41);
-			early_write_config_byte(hose, busno, busno,
-						pci_devfn, 0x43, v08_43);
-
-#ifdef TOSHIBA_RBTX4927_SETUP_DEBUG
-			{
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x04,
-						       &v08_04);
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x09,
-						       &v08_09);
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x41,
-						       &v08_41);
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x43,
-						       &v08_43);
-				early_read_config_byte(hose, busno, busno,
-						       pci_devfn, 0x5c,
-						       &v08_5c);
-
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x04 = 0x%02x\n", s, v08_04);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x09 = 0x%02x\n", s, v08_09);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x41 = 0x%02x\n", s, v08_41);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x43 = 0x%02x\n", s, v08_43);
-				TOSHIBA_RBTX4927_SETUP_DPRINTK
-				    (TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				     ":%s end 0x5c = 0x%02x\n", s, v08_5c);
-			}
-#endif
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_PCIBIOS, ":%s end\n",
-			     s);
-		}
-
-	}
-
-	register_pci_controller(&tx4927_controller);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCIBIOS,
-				       "+\n");
-
-	return 0;
-}
-
-arch_initcall(tx4927_pcibios_init);
-
-extern struct resource pci_io_resource;
-extern struct resource pci_mem_resource;
-
-void __init tx4927_pci_setup(void)
-{
-	static int called = 0;
-	extern unsigned int tx4927_get_mem_size(void);
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, "-\n");
-
-	mips_memory_upper = tx4927_get_mem_size() << 20;
-	mips_memory_upper += KSEG0;
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_memory_upper\n",
-				       mips_memory_upper);
-	mips_pci_io_base = TX4927_PCIIO;
-	mips_pci_io_size = TX4927_PCIIO_SIZE;
-	mips_pci_mem_base = TX4927_PCIMEM;
-	mips_pci_mem_size = TX4927_PCIMEM_SIZE;
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_pci_io_base\n",
-				       mips_pci_io_base);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_pci_io_size\n",
-				       mips_pci_io_size);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_pci_mem_base\n",
-				       mips_pci_mem_base);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_pci_mem_size\n",
-				       mips_pci_mem_size);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=pci_io_resource.start\n",
-				       pci_io_resource.start);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=pci_io_resource.end\n",
-				       pci_io_resource.end);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=pci_mem_resource.start\n",
-				       pci_mem_resource.start);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=pci_mem_resource.end\n",
-				       pci_mem_resource.end);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       "0x%08lx=mips_io_port_base",
-				       mips_io_port_base);
-	if (!called) {
-		printk
-		    ("%s PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
-		     toshiba_name,
-		     (unsigned short) (tx4927_pcicptr->pciid >> 16),
-		     (unsigned short) (tx4927_pcicptr->pciid & 0xffff),
-		     (unsigned short) (tx4927_pcicptr->pciccrev & 0xff),
-		     (!(tx4927_ccfgptr->
-			ccfg & TX4927_CCFG_PCIXARB)) ? "External" :
-		     "Internal");
-		called = 1;
-	}
-	printk("%s PCIC --%s PCICLK:", toshiba_name,
-	       (tx4927_ccfgptr->ccfg & TX4927_CCFG_PCI66) ? " PCI66" : "");
-	if (tx4927_ccfgptr->pcfg & TX4927_PCFG_PCICLKEN_ALL) {
-		int pciclk = 0;
-		if (mips_machtype == MACH_TOSHIBA_RBTX4937)
-			switch ((unsigned long) tx4927_ccfgptr->
-				ccfg & TX4937_CCFG_PCIDIVMODE_MASK) {
-			case TX4937_CCFG_PCIDIVMODE_4:
-				pciclk = tx4927_cpu_clock / 4;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_4_5:
-				pciclk = tx4927_cpu_clock * 2 / 9;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_5:
-				pciclk = tx4927_cpu_clock / 5;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_5_5:
-				pciclk = tx4927_cpu_clock * 2 / 11;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_8:
-				pciclk = tx4927_cpu_clock / 8;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_9:
-				pciclk = tx4927_cpu_clock / 9;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_10:
-				pciclk = tx4927_cpu_clock / 10;
-				break;
-			case TX4937_CCFG_PCIDIVMODE_11:
-				pciclk = tx4927_cpu_clock / 11;
-				break;
-			}
-
-		else
-			switch ((unsigned long) tx4927_ccfgptr->
-				ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
-			case TX4927_CCFG_PCIDIVMODE_2_5:
-				pciclk = tx4927_cpu_clock * 2 / 5;
-				break;
-			case TX4927_CCFG_PCIDIVMODE_3:
-				pciclk = tx4927_cpu_clock / 3;
-				break;
-			case TX4927_CCFG_PCIDIVMODE_5:
-				pciclk = tx4927_cpu_clock / 5;
-				break;
-			case TX4927_CCFG_PCIDIVMODE_6:
-				pciclk = tx4927_cpu_clock / 6;
-				break;
-			}
-
-		printk("Internal(%dMHz)", pciclk / 1000000);
-	} else {
-		int pciclk = 0;
-		int pciclk_setting = *tx4927_pci_clk_ptr;
-		switch (pciclk_setting & TX4927_PCI_CLK_MASK) {
-		case TX4927_PCI_CLK_33:
-			pciclk = 33333333;
-			break;
-		case TX4927_PCI_CLK_25:
-			pciclk = 25000000;
-			break;
-		case TX4927_PCI_CLK_66:
-			pciclk = 66666666;
-			break;
-		case TX4927_PCI_CLK_50:
-			pciclk = 50000000;
-			break;
-		}
-		printk("External(%dMHz)", pciclk / 1000000);
-	}
-	printk("\n");
-
-
-
-	/* GB->PCI mappings */
-	tx4927_pcicptr->g2piomask = (mips_pci_io_size - 1) >> 4;
-	tx4927_pcicptr->g2piogbase = mips_pci_io_base |
-#ifdef __BIG_ENDIAN
-	    TX4927_PCIC_G2PIOGBASE_ECHG
-#else
-	    TX4927_PCIC_G2PIOGBASE_BSDIS
-#endif
-	    ;
-
-	tx4927_pcicptr->g2piopbase = 0;
-
-	tx4927_pcicptr->g2pmmask[0] = (mips_pci_mem_size - 1) >> 4;
-	tx4927_pcicptr->g2pmgbase[0] = mips_pci_mem_base |
-#ifdef __BIG_ENDIAN
-	    TX4927_PCIC_G2PMnGBASE_ECHG
-#else
-	    TX4927_PCIC_G2PMnGBASE_BSDIS
-#endif
-	    ;
-	tx4927_pcicptr->g2pmpbase[0] = mips_pci_mem_base;
-
-	tx4927_pcicptr->g2pmmask[1] = 0;
-	tx4927_pcicptr->g2pmgbase[1] = 0;
-	tx4927_pcicptr->g2pmpbase[1] = 0;
-	tx4927_pcicptr->g2pmmask[2] = 0;
-	tx4927_pcicptr->g2pmgbase[2] = 0;
-	tx4927_pcicptr->g2pmpbase[2] = 0;
-
-
-	/* PCI->GB mappings (I/O 256B) */
-	tx4927_pcicptr->p2giopbase = 0;	/* 256B */
-
-	/* PCI->GB mappings (MEM 512MB) M0 gets all of memory */
-	tx4927_pcicptr->p2gm0plbase = 0;
-	tx4927_pcicptr->p2gm0pubase = 0;
-	tx4927_pcicptr->p2gmgbase[0] = 0 | TX4927_PCIC_P2GMnGBASE_TMEMEN |
-#ifdef __BIG_ENDIAN
-	    TX4927_PCIC_P2GMnGBASE_TECHG
-#else
-	    TX4927_PCIC_P2GMnGBASE_TBSDIS
-#endif
-	    ;
-
-	/* PCI->GB mappings (MEM 16MB) -not used */
-	tx4927_pcicptr->p2gm1plbase = 0xffffffff;
-	tx4927_pcicptr->p2gm1pubase = 0xffffffff;
-	tx4927_pcicptr->p2gmgbase[1] = 0;
-
-	/* PCI->GB mappings (MEM 1MB) -not used */
-	tx4927_pcicptr->p2gm2pbase = 0xffffffff;
-	tx4927_pcicptr->p2gmgbase[2] = 0;
-
-
-	/* Enable Initiator Memory 0 Space, I/O Space, Config */
-	tx4927_pcicptr->pciccfg &= TX4927_PCIC_PCICCFG_LBWC_MASK;
-	tx4927_pcicptr->pciccfg |=
-	    TX4927_PCIC_PCICCFG_IMSE0 | TX4927_PCIC_PCICCFG_IISE |
-	    TX4927_PCIC_PCICCFG_ICAE | TX4927_PCIC_PCICCFG_ATR;
-
-
-	/* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
-	tx4927_pcicptr->pcicfg1 = 0;
-
-	if (tx4927_pcic_trdyto >= 0) {
-		tx4927_pcicptr->g2ptocnt &= ~0xff;
-		tx4927_pcicptr->g2ptocnt |= (tx4927_pcic_trdyto & 0xff);
-	}
-
-	/* Clear All Local Bus Status */
-	tx4927_pcicptr->pcicstatus = TX4927_PCIC_PCICSTATUS_ALL;
-	/* Enable All Local Bus Interrupts */
-	tx4927_pcicptr->pcicmask = TX4927_PCIC_PCICSTATUS_ALL;
-	/* Clear All Initiator Status */
-	tx4927_pcicptr->g2pstatus = TX4927_PCIC_G2PSTATUS_ALL;
-	/* Enable All Initiator Interrupts */
-	tx4927_pcicptr->g2pmask = TX4927_PCIC_G2PSTATUS_ALL;
-	/* Clear All PCI Status Error */
-	tx4927_pcicptr->pcistatus =
-	    (tx4927_pcicptr->pcistatus & 0x0000ffff) |
-	    (TX4927_PCIC_PCISTATUS_ALL << 16);
-	/* Enable All PCI Status Error Interrupts */
-	tx4927_pcicptr->pcimask = TX4927_PCIC_PCISTATUS_ALL;
-
-	/* PCIC Int => IRC IRQ16 */
-	tx4927_pcicptr->pcicfg2 =
-	    (tx4927_pcicptr->pcicfg2 & 0xffffff00) | TX4927_IR_PCIC;
-
-	if (!(tx4927_ccfgptr->ccfg & TX4927_CCFG_PCIXARB)) {
-		/* XXX */
-	} else {
-		/* Reset Bus Arbiter */
-		tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_RPBA;
-		/* Enable Bus Arbiter */
-		tx4927_pcicptr->pbacfg = TX4927_PCIC_PBACFG_PBAEN;
-	}
-
-	tx4927_pcicptr->pcistatus = PCI_COMMAND_MASTER |
-	    PCI_COMMAND_MEMORY |
-	    PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2,
-				       ":pci setup complete:\n");
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI2, "+\n");
-}
-
-#endif /* CONFIG_PCI */
-
-static void __noreturn wait_forever(void)
-{
-	while (1)
-		if (cpu_wait)
-			(*cpu_wait)();
-}
-
-void toshiba_rbtx4927_restart(char *command)
-{
-	printk(KERN_NOTICE "System Rebooting...\n");
-
-	/* enable the s/w reset register */
-	writeb(RBTX4927_SW_RESET_ENABLE_SET, RBTX4927_SW_RESET_ENABLE);
-
-	/* wait for enable to be seen */
-	while ((readb(RBTX4927_SW_RESET_ENABLE) &
-		RBTX4927_SW_RESET_ENABLE_SET) == 0x00);
-
-	/* do a s/w reset */
-	writeb(RBTX4927_SW_RESET_DO_SET, RBTX4927_SW_RESET_DO);
-
-	/* do something passive while waiting for reset */
-	local_irq_disable();
-	wait_forever();
-	/* no return */
-}
-
-
-void toshiba_rbtx4927_halt(void)
-{
-	printk(KERN_NOTICE "System Halted\n");
-	local_irq_disable();
-	wait_forever();
-	/* no return */
-}
-
-void toshiba_rbtx4927_power_off(void)
-{
-	toshiba_rbtx4927_halt();
-	/* no return */
-}
-
-void __init plat_mem_setup(void)
-{
-	int i;
-	u32 cp0_config;
-	char *argptr;
-
-	printk("CPU is %s\n", toshiba_name);
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       "-\n");
-
-	/* f/w leaves this on at startup */
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       ":Clearing STO_ERL.\n");
-	clear_c0_status(ST0_ERL);
-
-	/* enable caches -- HCP5 does this, pmon does not */
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       ":Enabling TX49_CONF_IC,TX49_CONF_DC.\n");
-	cp0_config = read_c0_config();
-	cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
-	write_c0_config(cp0_config);
-
-	set_io_port_base(KSEG1 + TBTX4927_ISA_IO_OFFSET);
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       ":mips_io_port_base=0x%08lx\n",
-				       mips_io_port_base);
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       ":Resource\n");
-	ioport_resource.end = 0xffffffff;
-	iomem_resource.end = 0xffffffff;
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-				       ":ResetRoutines\n");
-	_machine_restart = toshiba_rbtx4927_restart;
-	_machine_halt = toshiba_rbtx4927_halt;
-	pm_power_off = toshiba_rbtx4927_power_off;
-
-	for (i = 0; i < TX4927_NR_TMR; i++)
-		txx9_tmr_init(TX4927_TMR_REG(0) & 0xfffffffffULL);
-
-#ifdef CONFIG_PCI
-
-	/* PCIC */
-	/*
-	   * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
-	   *
-	   * For TX4927:
-	   * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1).
-	   * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5)
-	   * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3)
-	   * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5)
-	   * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6)
-	   * i.e. S9[3]: ON (83MHz), OFF (100MHz)
-	   *
-	   * For TX4937:
-	   * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1)
-	   * PCIDIVMODE[10] is 0.
-	   * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8)
-	   * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4)
-	   * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9)
-	   * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5)
-	   * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10)
-	   * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5)
-	   *
-	 */
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1,
-				       "ccfg is %lx, PCIDIVMODE is %x\n",
-				       (unsigned long) tx4927_ccfgptr->ccfg,
-				       (unsigned long) tx4927_ccfgptr->ccfg &
-				       (mips_machtype == MACH_TOSHIBA_RBTX4937 ?
-					TX4937_CCFG_PCIDIVMODE_MASK :
-					TX4927_CCFG_PCIDIVMODE_MASK));
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_PCI1,
-				       "PCI66 mode is %lx, PCI mode is %lx, pci arb is %lx\n",
-				       (unsigned long) tx4927_ccfgptr->
-				       ccfg & TX4927_CCFG_PCI66,
-				       (unsigned long) tx4927_ccfgptr->
-				       ccfg & TX4927_CCFG_PCIMIDE,
-				       (unsigned long) tx4927_ccfgptr->
-				       ccfg & TX4927_CCFG_PCIXARB);
-
-	if (mips_machtype == MACH_TOSHIBA_RBTX4937)
-		switch ((unsigned long)tx4927_ccfgptr->
-			ccfg & TX4937_CCFG_PCIDIVMODE_MASK) {
-		case TX4937_CCFG_PCIDIVMODE_8:
-		case TX4937_CCFG_PCIDIVMODE_4:
-			tx4927_cpu_clock = 266666666;	/* 266MHz */
-			break;
-		case TX4937_CCFG_PCIDIVMODE_9:
-		case TX4937_CCFG_PCIDIVMODE_4_5:
-			tx4927_cpu_clock = 300000000;	/* 300MHz */
-			break;
-		default:
-			tx4927_cpu_clock = 333333333;	/* 333MHz */
-		}
-	else
-		switch ((unsigned long)tx4927_ccfgptr->
-			ccfg & TX4927_CCFG_PCIDIVMODE_MASK) {
-		case TX4927_CCFG_PCIDIVMODE_2_5:
-		case TX4927_CCFG_PCIDIVMODE_5:
-			tx4927_cpu_clock = 166666666;	/* 166MHz */
-			break;
-		default:
-			tx4927_cpu_clock = 200000000;	/* 200MHz */
-		}
-
-	/* CCFG */
-	/* do reset on watchdog */
-	tx4927_ccfgptr->ccfg |= TX4927_CCFG_WR;
-	/* enable Timeout BusError */
-	if (tx4927_ccfg_toeon)
-		tx4927_ccfgptr->ccfg |= TX4927_CCFG_TOE;
-
-	tx4927_pci_setup();
-	if (tx4927_using_backplane == 1)
-		printk("backplane board IS installed\n");
-	else
-		printk("No Backplane \n");
-
-	/* this is on ISA bus behind PCI bus, so need PCI up first */
-#ifdef CONFIG_TOSHIBA_FPCIB0
-	{
-		if (tx4927_using_backplane) {
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":fpcibo=yes\n");
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":smsc_fdc37m81x_init()\n");
-			smsc_fdc37m81x_init(0x3f0);
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":smsc_fdc37m81x_config_beg()\n");
-			smsc_fdc37m81x_config_beg();
-
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":smsc_fdc37m81x_config_set(KBD)\n");
-			smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM,
-						  SMSC_FDC37M81X_KBD);
-			smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1);
-			smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12);
-			smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE,
-						  1);
-
-			smsc_fdc37m81x_config_end();
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":smsc_fdc37m81x_config_end()\n");
-		} else {
-			TOSHIBA_RBTX4927_SETUP_DPRINTK
-			    (TOSHIBA_RBTX4927_SETUP_SETUP,
-			     ":fpcibo=not_found\n");
-		}
-	}
-#else
-	{
-		TOSHIBA_RBTX4927_SETUP_DPRINTK
-		    (TOSHIBA_RBTX4927_SETUP_SETUP, ":fpcibo=no\n");
-	}
-#endif
-
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_SERIAL_TXX9
-	{
-		extern int early_serial_txx9_setup(struct uart_port *port);
-		struct uart_port req;
-		for(i = 0; i < 2; i++) {
-			memset(&req, 0, sizeof(req));
-			req.line = i;
-			req.iotype = UPIO_MEM;
-			req.membase = (char *)(0xff1ff300 + i * 0x100);
-			req.mapbase = 0xff1ff300 + i * 0x100;
-			req.irq = TX4927_IRQ_PIC_BEG + 8 + i;
-			req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-			req.uartclk = 50000000;
-			early_serial_txx9_setup(&req);
-		}
-	}
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
-                strcat(argptr, " console=ttyS0,38400");
-        }
-#endif
-#endif
-
-#ifdef CONFIG_ROOT_NFS
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "root=") == NULL) {
-                strcat(argptr, " root=/dev/nfs rw");
-        }
-#endif
-
-
-#ifdef CONFIG_IP_PNP
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "ip=") == NULL) {
-                strcat(argptr, " ip=any");
-        }
-#endif
-
-
-	TOSHIBA_RBTX4927_SETUP_DPRINTK(TOSHIBA_RBTX4927_SETUP_SETUP,
-			       "+\n");
-}
-
-void __init plat_time_init(void)
-{
-	mips_hpt_frequency = tx4927_cpu_clock / 2;
-	if (tx4927_ccfgptr->ccfg & TX4927_CCFG_TINTDIS)
-		txx9_clockevent_init(TX4927_TMR_REG(0) & 0xfffffffffULL,
-				     TXX9_IRQ_BASE + 17,
-				     50000000);
-}
-
-static int __init toshiba_rbtx4927_rtc_init(void)
-{
-	static struct resource __initdata res = {
-		.start	= 0x1c010000,
-		.end	= 0x1c010000 + 0x800 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("rtc-ds1742", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-device_initcall(toshiba_rbtx4927_rtc_init);
-
-static int __init rbtx4927_ne_init(void)
-{
-	static struct resource __initdata res[] = {
-		{
-			.start	= RBTX4927_RTL_8019_BASE,
-			.end	= RBTX4927_RTL_8019_BASE + 0x20 - 1,
-			.flags	= IORESOURCE_IO,
-		}, {
-			.start	= RBTX4927_RTL_8019_IRQ,
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("ne", -1,
-						res, ARRAY_SIZE(res));
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-device_initcall(rbtx4927_ne_init);
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4927_wdt_init(void)
-{
-	return txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
-}
-device_initcall(rbtx4927_wdt_init);
-
-/* Minimum CLK support */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	if (!strcmp(id, "imbus_clk"))
-		return (struct clk *)50000000;
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return (unsigned long)clk;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
diff --git a/arch/mips/tx4938/Kconfig b/arch/mips/tx4938/Kconfig
deleted file mode 100644
index d90e9cd85138..000000000000
--- a/arch/mips/tx4938/Kconfig
+++ /dev/null
@@ -1,24 +0,0 @@
-if TOSHIBA_RBTX4938
-
-comment "Multiplex Pin Select"
-choice
-	prompt "PIO[58:61]"
-	default TOSHIBA_RBTX4938_MPLEX_PIO58_61
-
-config TOSHIBA_RBTX4938_MPLEX_PIO58_61
-	bool "PIO"
-config TOSHIBA_RBTX4938_MPLEX_NAND
-	bool "NAND"
-config TOSHIBA_RBTX4938_MPLEX_ATA
-	bool "ATA"
-
-endchoice
-
-config TX4938_NAND_BOOT
-	depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND
-	bool "NAND Boot Support (EXPERIMENTAL)"
-	help
-	  This is only for Toshiba RBTX4938 reference board, which has NAND IPL.
-	  Select this option if you need to use NAND boot.
-
-endif
diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile
deleted file mode 100644
index 56aa1ed1ee0c..000000000000
--- a/arch/mips/tx4938/common/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for common code for Toshiba TX4927 based systems
-#
-
-obj-y	+= prom.o irq.o
-obj-$(CONFIG_KGDB) += dbgio.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4938/common/dbgio.c b/arch/mips/tx4938/common/dbgio.c
deleted file mode 100644
index 33b9c672a322..000000000000
--- a/arch/mips/tx4938/common/dbgio.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/mips/tx4938/common/dbgio.c
- *
- * kgdb interface for gdb
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * Copyright 2005 MontaVista Software Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License as published by the
- *  Free Software Foundation; either version 2 of the License, or (at your
- *  option) any later version.
- *
- *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
- *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
- *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
- *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
- *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Support for TX4938 in 2.6 - Hiroshi DOYU <Hiroshi_DOYU@montavista.co.jp>
- */
-
-#include <linux/types>
-
-extern u8 txx9_sio_kdbg_rd(void);
-extern int txx9_sio_kdbg_wr( u8 ch );
-
-u8 getDebugChar(void)
-{
-	return (txx9_sio_kdbg_rd());
-}
-
-int putDebugChar(u8 byte)
-{
-	return (txx9_sio_kdbg_wr(byte));
-}
-
diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c
deleted file mode 100644
index c059b899d120..000000000000
--- a/arch/mips/tx4938/common/irq.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * linux/arch/mips/tx4938/common/irq.c
- *
- * Common tx4938 irq handler
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/tx4938/rbtx4938.h>
-
-void __init
-tx4938_irq_init(void)
-{
-	mips_cpu_irq_init();
-	txx9_irq_init(TX4938_IRC_REG);
-	set_irq_chained_handler(TX4938_IRQ_NEST_PIC_ON_CP0, handle_simple_irq);
-}
-
-int toshiba_rbtx4938_irq_nested(int irq);
-
-asmlinkage void plat_irq_dispatch(void)
-{
-	unsigned int pending = read_c0_cause() & read_c0_status();
-
-	if (pending & STATUSF_IP7)
-		do_IRQ(TX4938_IRQ_CPU_TIMER);
-	else if (pending & STATUSF_IP2) {
-		int irq = txx9_irq();
-		if (irq == TX4938_IRQ_PIC_BEG + TX4938_IR_INT(0))
-			irq = toshiba_rbtx4938_irq_nested(irq);
-		if (irq >= 0)
-			do_IRQ(irq);
-		else
-			spurious_interrupt();
-	} else if (pending & STATUSF_IP1)
-		do_IRQ(TX4938_IRQ_USER1);
-	else if (pending & STATUSF_IP0)
-		do_IRQ(TX4938_IRQ_USER0);
-}
diff --git a/arch/mips/tx4938/common/prom.c b/arch/mips/tx4938/common/prom.c
deleted file mode 100644
index 20baeaeba4cd..000000000000
--- a/arch/mips/tx4938/common/prom.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linux/arch/mips/tx4938/common/prom.c
- *
- * common tx4938 memory interface
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/io.h>
-
-static unsigned int __init
-tx4938_process_sdccr(u64 * addr)
-{
-	u64 val;
-	unsigned int sdccr_ce;
-	unsigned int sdccr_rs;
-	unsigned int sdccr_cs;
-	unsigned int sdccr_mw;
-	unsigned int rs = 0;
-	unsigned int cs = 0;
-	unsigned int mw = 0;
-	unsigned int bc = 4;
-	unsigned int msize = 0;
-
-	val = ____raw_readq((void __iomem *)addr);
-
-	/* MVMCP -- need #defs for these bits masks */
-	sdccr_ce = ((val & (1 << 10)) >> 10);
-	sdccr_rs = ((val & (3 << 5)) >> 5);
-	sdccr_cs = ((val & (7 << 2)) >> 2);
-	sdccr_mw = ((val & (1 << 0)) >> 0);
-
-	if (sdccr_ce) {
-		switch (sdccr_rs) {
-		case 0:{
-				rs = 2048;
-				break;
-			}
-		case 1:{
-				rs = 4096;
-				break;
-			}
-		case 2:{
-				rs = 8192;
-				break;
-			}
-		default:{
-				rs = 0;
-				break;
-			}
-		}
-		switch (sdccr_cs) {
-		case 0:{
-				cs = 256;
-				break;
-			}
-		case 1:{
-				cs = 512;
-				break;
-			}
-		case 2:{
-				cs = 1024;
-				break;
-			}
-		case 3:{
-				cs = 2048;
-				break;
-			}
-		case 4:{
-				cs = 4096;
-				break;
-			}
-		default:{
-				cs = 0;
-				break;
-			}
-		}
-		switch (sdccr_mw) {
-		case 0:{
-				mw = 8;
-				break;
-			}	/* 8 bytes = 64 bits */
-		case 1:{
-				mw = 4;
-				break;
-			}	/* 4 bytes = 32 bits */
-		}
-	}
-
-	/*           bytes per chip    MB per chip          bank count */
-	msize = (((rs * cs * mw) / (1024 * 1024)) * (bc));
-
-	/* MVMCP -- bc hard coded to 4 from table 9.3.1     */
-	/*          boad supports bc=2 but no way to detect */
-
-	return (msize);
-}
-
-unsigned int __init
-tx4938_get_mem_size(void)
-{
-	unsigned int c0;
-	unsigned int c1;
-	unsigned int c2;
-	unsigned int c3;
-	unsigned int total;
-
-	/* MVMCP -- need #defs for these registers */
-	c0 = tx4938_process_sdccr((u64 *) 0xff1f8000);
-	c1 = tx4938_process_sdccr((u64 *) 0xff1f8008);
-	c2 = tx4938_process_sdccr((u64 *) 0xff1f8010);
-	c3 = tx4938_process_sdccr((u64 *) 0xff1f8018);
-	total = c0 + c1 + c2 + c3;
-
-	return (total);
-}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/Makefile b/arch/mips/tx4938/toshiba_rbtx4938/Makefile
deleted file mode 100644
index 2316dd7dd1bd..000000000000
--- a/arch/mips/tx4938/toshiba_rbtx4938/Makefile
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# Makefile for common code for Toshiba TX4927 based systems
-#
-
-obj-y	+= prom.o setup.o irq.o spi_eeprom.o
-
-EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c
deleted file mode 100644
index 4d6a8dc46c76..000000000000
--- a/arch/mips/tx4938/toshiba_rbtx4938/irq.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * linux/arch/mips/tx4938/toshiba_rbtx4938/irq.c
- *
- * Toshiba RBTX4938 specific interrupt handlers
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-
-/*
-IRQ  Device
-
-16   TX4938-CP0/00 Software 0
-17   TX4938-CP0/01 Software 1
-18   TX4938-CP0/02 Cascade TX4938-CP0
-19   TX4938-CP0/03 Multiplexed -- do not use
-20   TX4938-CP0/04 Multiplexed -- do not use
-21   TX4938-CP0/05 Multiplexed -- do not use
-22   TX4938-CP0/06 Multiplexed -- do not use
-23   TX4938-CP0/07 CPU TIMER
-
-24   TX4938-PIC/00
-25   TX4938-PIC/01
-26   TX4938-PIC/02 Cascade RBTX4938-IOC
-27   TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet
-28   TX4938-PIC/04
-29   TX4938-PIC/05 TX4938 ETH1
-30   TX4938-PIC/06 TX4938 ETH0
-31   TX4938-PIC/07
-32   TX4938-PIC/08 TX4938 SIO 0
-33   TX4938-PIC/09 TX4938 SIO 1
-34   TX4938-PIC/10 TX4938 DMA0
-35   TX4938-PIC/11 TX4938 DMA1
-36   TX4938-PIC/12 TX4938 DMA2
-37   TX4938-PIC/13 TX4938 DMA3
-38   TX4938-PIC/14
-39   TX4938-PIC/15
-40   TX4938-PIC/16 TX4938 PCIC
-41   TX4938-PIC/17 TX4938 TMR0
-42   TX4938-PIC/18 TX4938 TMR1
-43   TX4938-PIC/19 TX4938 TMR2
-44   TX4938-PIC/20
-45   TX4938-PIC/21
-46   TX4938-PIC/22 TX4938 PCIERR
-47   TX4938-PIC/23
-48   TX4938-PIC/24
-49   TX4938-PIC/25
-50   TX4938-PIC/26
-51   TX4938-PIC/27
-52   TX4938-PIC/28
-53   TX4938-PIC/29
-54   TX4938-PIC/30
-55   TX4938-PIC/31 TX4938 SPI
-
-56 RBTX4938-IOC/00 PCI-D
-57 RBTX4938-IOC/01 PCI-C
-58 RBTX4938-IOC/02 PCI-B
-59 RBTX4938-IOC/03 PCI-A
-60 RBTX4938-IOC/04 RTC
-61 RBTX4938-IOC/05 ATA
-62 RBTX4938-IOC/06 MODEM
-63 RBTX4938-IOC/07 SWINT
-*/
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <asm/tx4938/rbtx4938.h>
-
-static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq);
-static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq);
-
-#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC"
-static struct irq_chip toshiba_rbtx4938_irq_ioc_type = {
-	.name = TOSHIBA_RBTX4938_IOC_NAME,
-	.ack = toshiba_rbtx4938_irq_ioc_disable,
-	.mask = toshiba_rbtx4938_irq_ioc_disable,
-	.mask_ack = toshiba_rbtx4938_irq_ioc_disable,
-	.unmask = toshiba_rbtx4938_irq_ioc_enable,
-};
-
-int
-toshiba_rbtx4938_irq_nested(int sw_irq)
-{
-	u8 level3;
-
-	level3 = readb(rbtx4938_imstat_addr);
-	if (level3)
-		/* must use fls so onboard ATA has priority */
-		sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1;
-
-	return sw_irq;
-}
-
-static struct irqaction toshiba_rbtx4938_irq_ioc_action = {
-	.handler = no_action,
-	.flags = 0,
-	.mask = CPU_MASK_NONE,
-	.name = TOSHIBA_RBTX4938_IOC_NAME,
-};
-
-/**********************************************************************************/
-/* Functions for ioc                                                              */
-/**********************************************************************************/
-static void __init
-toshiba_rbtx4938_irq_ioc_init(void)
-{
-	int i;
-
-	for (i = TOSHIBA_RBTX4938_IRQ_IOC_BEG;
-	     i <= TOSHIBA_RBTX4938_IRQ_IOC_END; i++)
-		set_irq_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type,
-					 handle_level_irq);
-
-	setup_irq(RBTX4938_IRQ_IOCINT,
-		  &toshiba_rbtx4938_irq_ioc_action);
-}
-
-static void
-toshiba_rbtx4938_irq_ioc_enable(unsigned int irq)
-{
-	unsigned char v;
-
-	v = readb(rbtx4938_imask_addr);
-	v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
-	writeb(v, rbtx4938_imask_addr);
-	mmiowb();
-}
-
-static void
-toshiba_rbtx4938_irq_ioc_disable(unsigned int irq)
-{
-	unsigned char v;
-
-	v = readb(rbtx4938_imask_addr);
-	v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG));
-	writeb(v, rbtx4938_imask_addr);
-	mmiowb();
-}
-
-void __init arch_init_irq(void)
-{
-	extern void tx4938_irq_init(void);
-
-	/* Now, interrupt control disabled, */
-	/* all IRC interrupts are masked, */
-	/* all IRC interrupt mode are Low Active. */
-
-	/* mask all IOC interrupts */
-	writeb(0, rbtx4938_imask_addr);
-
-	/* clear SoftInt interrupts */
-	writeb(0, rbtx4938_softint_addr);
-	tx4938_irq_init();
-	toshiba_rbtx4938_irq_ioc_init();
-	/* Onboard 10M Ether: High Active */
-	set_irq_type(RBTX4938_IRQ_ETHER, IRQF_TRIGGER_HIGH);
-}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/prom.c b/arch/mips/tx4938/toshiba_rbtx4938/prom.c
deleted file mode 100644
index 1644bffa501a..000000000000
--- a/arch/mips/tx4938/toshiba_rbtx4938/prom.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * linux/arch/mips/tx4938/toshiba_rbtx4938/prom.c
- *
- * rbtx4938 specific prom routines
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <asm/tx4938/tx4938.h>
-
-void __init prom_init_cmdline(void)
-{
-	int argc = (int) fw_arg0;
-	char **argv = (char **) fw_arg1;
-	int i;
-
-	/* ignore all built-in args if any f/w args given */
-	if (argc > 1) {
-		*arcs_cmdline = '\0';
-	}
-
-	for (i = 1; i < argc; i++) {
-		if (i != 1) {
-			strcat(arcs_cmdline, " ");
-		}
-		strcat(arcs_cmdline, argv[i]);
-	}
-}
-
-void __init prom_init(void)
-{
-	extern int tx4938_get_mem_size(void);
-	int msize;
-#ifndef CONFIG_TX4938_NAND_BOOT
-	prom_init_cmdline();
-#endif
-
-	msize = tx4938_get_mem_size();
-	add_memory_region(0, msize << 20, BOOT_MEM_RAM);
-
-	return;
-}
-
-void __init prom_free_prom_memory(void)
-{
-}
-
-void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
-{
-	return;
-}
-
-const char *get_system_type(void)
-{
-	return "Toshiba RBTX4938";
-}
-
-char * __init prom_getcmdline(void)
-{
-	return &(arcs_cmdline[0]);
-}
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c
deleted file mode 100644
index 3a3659e8633a..000000000000
--- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c
+++ /dev/null
@@ -1,1124 +0,0 @@
-/*
- * linux/arch/mips/tx4938/toshiba_rbtx4938/setup.c
- *
- * Setup pointers to hardware-dependent routines.
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/console.h>
-#include <linux/pci.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio.h>
-
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/txx9tmr.h>
-#include <asm/io.h>
-#include <asm/bootinfo.h>
-#include <asm/tx4938/rbtx4938.h>
-#ifdef CONFIG_SERIAL_TXX9
-#include <linux/serial_core.h>
-#endif
-#include <linux/spi/spi.h>
-#include <asm/tx4938/spi.h>
-#include <asm/txx9pio.h>
-
-extern char * __init prom_getcmdline(void);
-static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr);
-
-/* These functions are used for rebooting or halting the machine*/
-extern void rbtx4938_machine_restart(char *command);
-extern void rbtx4938_machine_halt(void);
-extern void rbtx4938_machine_power_off(void);
-
-/* clocks */
-unsigned int txx9_master_clock;
-unsigned int txx9_cpu_clock;
-unsigned int txx9_gbus_clock;
-
-unsigned long rbtx4938_ce_base[8];
-unsigned long rbtx4938_ce_size[8];
-int txboard_pci66_mode;
-static int tx4938_pcic_trdyto;	/* default: disabled */
-static int tx4938_pcic_retryto;	/* default: disabled */
-static int tx4938_ccfg_toeon = 1;
-
-struct tx4938_pcic_reg *pcicptrs[4] = {
-       tx4938_pcicptr  /* default setting for TX4938 */
-};
-
-static struct {
-	unsigned long base;
-	unsigned long size;
-} phys_regions[16] __initdata;
-static int num_phys_regions  __initdata;
-
-#define PHYS_REGION_MINSIZE	0x10000
-
-void rbtx4938_machine_halt(void)
-{
-        printk(KERN_NOTICE "System Halted\n");
-	local_irq_disable();
-
-	while (1)
-		__asm__(".set\tmips3\n\t"
-			"wait\n\t"
-			".set\tmips0");
-}
-
-void rbtx4938_machine_power_off(void)
-{
-        rbtx4938_machine_halt();
-        /* no return */
-}
-
-void rbtx4938_machine_restart(char *command)
-{
-	local_irq_disable();
-
-	printk("Rebooting...");
-	writeb(1, rbtx4938_softresetlock_addr);
-	writeb(1, rbtx4938_sfvol_addr);
-	writeb(1, rbtx4938_softreset_addr);
-	while(1)
-		;
-}
-
-void __init
-txboard_add_phys_region(unsigned long base, unsigned long size)
-{
-	if (num_phys_regions >= ARRAY_SIZE(phys_regions)) {
-		printk("phys_region overflow\n");
-		return;
-	}
-	phys_regions[num_phys_regions].base = base;
-	phys_regions[num_phys_regions].size = size;
-	num_phys_regions++;
-}
-unsigned long __init
-txboard_find_free_phys_region(unsigned long begin, unsigned long end,
-			      unsigned long size)
-{
-	unsigned long base;
-	int i;
-
-	for (base = begin / size * size; base < end; base += size) {
-		for (i = 0; i < num_phys_regions; i++) {
-			if (phys_regions[i].size &&
-			    base <= phys_regions[i].base + (phys_regions[i].size - 1) &&
-			    base + (size - 1) >= phys_regions[i].base)
-				break;
-		}
-		if (i == num_phys_regions)
-			return base;
-	}
-	return 0;
-}
-unsigned long __init
-txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end,
-				     unsigned long *size)
-{
-	unsigned long sz, base;
-	for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) {
-		base = txboard_find_free_phys_region(begin, end, sz);
-		if (base) {
-			*size = sz;
-			return base;
-		}
-	}
-	return 0;
-}
-unsigned long __init
-txboard_request_phys_region_range(unsigned long begin, unsigned long end,
-				  unsigned long size)
-{
-	unsigned long base;
-	base = txboard_find_free_phys_region(begin, end, size);
-	if (base)
-		txboard_add_phys_region(base, size);
-	return base;
-}
-unsigned long __init
-txboard_request_phys_region(unsigned long size)
-{
-	unsigned long base;
-	unsigned long begin = 0, end = 0x20000000;	/* search low 512MB */
-	base = txboard_find_free_phys_region(begin, end, size);
-	if (base)
-		txboard_add_phys_region(base, size);
-	return base;
-}
-unsigned long __init
-txboard_request_phys_region_shrink(unsigned long *size)
-{
-	unsigned long base;
-	unsigned long begin = 0, end = 0x20000000;	/* search low 512MB */
-	base = txboard_find_free_phys_region_shrink(begin, end, size);
-	if (base)
-		txboard_add_phys_region(base, *size);
-	return base;
-}
-
-#ifdef CONFIG_PCI
-void __init
-tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr,
-		  struct pci_controller *channel,
-		  unsigned long pci_io_base,
-		  int extarb)
-{
-	int i;
-
-	/* Disable All Initiator Space */
-	pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)|
-			      TX4938_PCIC_PCICCFG_G2PMEN(1)|
-			      TX4938_PCIC_PCICCFG_G2PMEN(2)|
-			      TX4938_PCIC_PCICCFG_G2PIOEN);
-
-	/* GB->PCI mappings */
-	pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4;
-	pcicptr->g2piogbase = pci_io_base |
-#ifdef __BIG_ENDIAN
-		TX4938_PCIC_G2PIOGBASE_ECHG
-#else
-		TX4938_PCIC_G2PIOGBASE_BSDIS
-#endif
-		;
-	pcicptr->g2piopbase = 0;
-	for (i = 0; i < 3; i++) {
-		pcicptr->g2pmmask[i] = 0;
-		pcicptr->g2pmgbase[i] = 0;
-		pcicptr->g2pmpbase[i] = 0;
-	}
-	if (channel->mem_resource->end) {
-		pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4;
-		pcicptr->g2pmgbase[0] = channel->mem_resource->start |
-#ifdef __BIG_ENDIAN
-			TX4938_PCIC_G2PMnGBASE_ECHG
-#else
-			TX4938_PCIC_G2PMnGBASE_BSDIS
-#endif
-			;
-		pcicptr->g2pmpbase[0] = channel->mem_resource->start;
-	}
-	/* PCI->GB mappings (I/O 256B) */
-	pcicptr->p2giopbase = 0; /* 256B */
-	pcicptr->p2giogbase = 0;
-	/* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */
-	pcicptr->p2gm0plbase = 0;
-	pcicptr->p2gm0pubase = 0;
-	pcicptr->p2gmgbase[0] = 0 |
-		TX4938_PCIC_P2GMnGBASE_TMEMEN |
-#ifdef __BIG_ENDIAN
-		TX4938_PCIC_P2GMnGBASE_TECHG
-#else
-		TX4938_PCIC_P2GMnGBASE_TBSDIS
-#endif
-		;
-	/* PCI->GB mappings (MEM 16MB) */
-	pcicptr->p2gm1plbase = 0xffffffff;
-	pcicptr->p2gm1pubase = 0xffffffff;
-	pcicptr->p2gmgbase[1] = 0;
-	/* PCI->GB mappings (MEM 1MB) */
-	pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */
-	pcicptr->p2gmgbase[2] = 0;
-
-	pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK;
-	/* Enable Initiator Memory Space */
-	if (channel->mem_resource->end)
-		pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0);
-	/* Enable Initiator I/O Space */
-	if (channel->io_resource->end)
-		pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN;
-	/* Enable Initiator Config */
-	pcicptr->pciccfg |=
-		TX4938_PCIC_PCICCFG_ICAEN |
-		TX4938_PCIC_PCICCFG_TCAR;
-
-	/* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */
-	pcicptr->pcicfg1 = 0;
-
-	pcicptr->g2ptocnt &= ~0xffff;
-
-	if (tx4938_pcic_trdyto >= 0) {
-		pcicptr->g2ptocnt &= ~0xff;
-		pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff);
-	}
-
-	if (tx4938_pcic_retryto >= 0) {
-		pcicptr->g2ptocnt &= ~0xff00;
-		pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00);
-	}
-
-	/* Clear All Local Bus Status */
-	pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL;
-	/* Enable All Local Bus Interrupts */
-	pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL;
-	/* Clear All Initiator Status */
-	pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL;
-	/* Enable All Initiator Interrupts */
-	pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL;
-	/* Clear All PCI Status Error */
-	pcicptr->pcistatus =
-		(pcicptr->pcistatus & 0x0000ffff) |
-		(TX4938_PCIC_PCISTATUS_ALL << 16);
-	/* Enable All PCI Status Error Interrupts */
-	pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL;
-
-	if (!extarb) {
-		/* Reset Bus Arbiter */
-		pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA;
-		pcicptr->pbabm = 0;
-		/* Enable Bus Arbiter */
-		pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN;
-	}
-
-      /* PCIC Int => IRC IRQ16 */
-	pcicptr->pcicfg2 =
-		    (pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC;
-
-	pcicptr->pcistatus = PCI_COMMAND_MASTER |
-		PCI_COMMAND_MEMORY |
-		PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
-}
-
-int __init
-tx4938_report_pciclk(void)
-{
-	unsigned long pcode = TX4938_REV_PCODE();
-	int pciclk = 0;
-	printk("TX%lx PCIC --%s PCICLK:",
-	       pcode,
-	       (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : "");
-	if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
-
-		switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) {
-		case TX4938_CCFG_PCIDIVMODE_4:
-			pciclk = txx9_cpu_clock / 4; break;
-		case TX4938_CCFG_PCIDIVMODE_4_5:
-			pciclk = txx9_cpu_clock * 2 / 9; break;
-		case TX4938_CCFG_PCIDIVMODE_5:
-			pciclk = txx9_cpu_clock / 5; break;
-		case TX4938_CCFG_PCIDIVMODE_5_5:
-			pciclk = txx9_cpu_clock * 2 / 11; break;
-		case TX4938_CCFG_PCIDIVMODE_8:
-			pciclk = txx9_cpu_clock / 8; break;
-		case TX4938_CCFG_PCIDIVMODE_9:
-			pciclk = txx9_cpu_clock / 9; break;
-		case TX4938_CCFG_PCIDIVMODE_10:
-			pciclk = txx9_cpu_clock / 10; break;
-		case TX4938_CCFG_PCIDIVMODE_11:
-			pciclk = txx9_cpu_clock / 11; break;
-		}
-		printk("Internal(%dMHz)", pciclk / 1000000);
-	} else {
-		printk("External");
-		pciclk = -1;
-	}
-	printk("\n");
-	return pciclk;
-}
-
-void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr)
-{
-	pcicptrs[ch] = pcicptr;
-}
-
-struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch)
-{
-       return pcicptrs[ch];
-}
-
-static struct pci_dev *fake_pci_dev(struct pci_controller *hose,
-                                    int top_bus, int busnr, int devfn)
-{
-	static struct pci_dev dev;
-	static struct pci_bus bus;
-
-	dev.sysdata = bus.sysdata = hose;
-	dev.devfn = devfn;
-	bus.number = busnr;
-	bus.ops = hose->pci_ops;
-	bus.parent = NULL;
-	dev.bus = &bus;
-
-	return &dev;
-}
-
-#define EARLY_PCI_OP(rw, size, type)                                    \
-static int early_##rw##_config_##size(struct pci_controller *hose,      \
-        int top_bus, int bus, int devfn, int offset, type value)        \
-{                                                                       \
-        return pci_##rw##_config_##size(                                \
-                fake_pci_dev(hose, top_bus, bus, devfn),                \
-                offset, value);                                         \
-}
-
-EARLY_PCI_OP(read, word, u16 *)
-
-int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus)
-{
-	u32 pci_devfn;
-	unsigned short vid;
-	int devfn_start = 0;
-	int devfn_stop = 0xff;
-	int cap66 = -1;
-	u16 stat;
-
-	printk("PCI: Checking 66MHz capabilities...\n");
-
-	for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) {
-		if (early_read_config_word(hose, top_bus, current_bus,
-					   pci_devfn, PCI_VENDOR_ID,
-					   &vid) != PCIBIOS_SUCCESSFUL)
-			continue;
-
-		if (vid == 0xffff) continue;
-
-		/* check 66MHz capability */
-		if (cap66 < 0)
-			cap66 = 1;
-		if (cap66) {
-			early_read_config_word(hose, top_bus, current_bus, pci_devfn,
-					       PCI_STATUS, &stat);
-			if (!(stat & PCI_STATUS_66MHZ)) {
-				printk(KERN_DEBUG "PCI: %02x:%02x not 66MHz capable.\n",
-				       current_bus, pci_devfn);
-				cap66 = 0;
-				break;
-			}
-		}
-	}
-	return cap66 > 0;
-}
-
-int __init
-tx4938_pciclk66_setup(void)
-{
-	int pciclk;
-
-	/* Assert M66EN */
-	tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66;
-	/* Double PCICLK (if possible) */
-	if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) {
-		unsigned int pcidivmode =
-			tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK;
-		switch (pcidivmode) {
-		case TX4938_CCFG_PCIDIVMODE_8:
-		case TX4938_CCFG_PCIDIVMODE_4:
-			pcidivmode = TX4938_CCFG_PCIDIVMODE_4;
-			pciclk = txx9_cpu_clock / 4;
-			break;
-		case TX4938_CCFG_PCIDIVMODE_9:
-		case TX4938_CCFG_PCIDIVMODE_4_5:
-			pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5;
-			pciclk = txx9_cpu_clock * 2 / 9;
-			break;
-		case TX4938_CCFG_PCIDIVMODE_10:
-		case TX4938_CCFG_PCIDIVMODE_5:
-			pcidivmode = TX4938_CCFG_PCIDIVMODE_5;
-			pciclk = txx9_cpu_clock / 5;
-			break;
-		case TX4938_CCFG_PCIDIVMODE_11:
-		case TX4938_CCFG_PCIDIVMODE_5_5:
-		default:
-			pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5;
-			pciclk = txx9_cpu_clock * 2 / 11;
-			break;
-		}
-		tx4938_ccfgptr->ccfg =
-			(tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK)
-			| pcidivmode;
-		printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n",
-		       (unsigned long)tx4938_ccfgptr->ccfg);
-	} else {
-		pciclk = -1;
-	}
-	return pciclk;
-}
-
-extern struct pci_controller tx4938_pci_controller[];
-static int __init tx4938_pcibios_init(void)
-{
-	unsigned long mem_base[2];
-	unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0, TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */
-	unsigned long io_base[2];
-	unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0, TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */
-	/* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */
-	int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB);
-
-	PCIBIOS_MIN_IO = 0x00001000UL;
-
-	mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]);
-	io_base[0] = txboard_request_phys_region_shrink(&io_size[0]);
-
-	printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n",
-	       (unsigned short)(tx4938_pcicptr->pciid >> 16),
-	       (unsigned short)(tx4938_pcicptr->pciid & 0xffff),
-	       (unsigned short)(tx4938_pcicptr->pciccrev & 0xff),
-	       extarb ? "External" : "Internal");
-
-	/* setup PCI area */
-	tx4938_pci_controller[0].io_resource->start = io_base[0];
-	tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1;
-	tx4938_pci_controller[0].mem_resource->start = mem_base[0];
-	tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1;
-
-	set_tx4938_pcicptr(0, tx4938_pcicptr);
-
-	register_pci_controller(&tx4938_pci_controller[0]);
-
-	if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) {
-		printk("TX4938_CCFG_PCI66 already configured\n");
-		txboard_pci66_mode = -1; /* already configured */
-	}
-
-	/* Reset PCI Bus */
-	writeb(0, rbtx4938_pcireset_addr);
-	/* Reset PCIC */
-	tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
-	if (txboard_pci66_mode > 0)
-		tx4938_pciclk66_setup();
-	mdelay(10);
-	/* clear PCIC reset */
-	tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
-	writeb(1, rbtx4938_pcireset_addr);
-	mmiowb();
-	tx4938_report_pcic_status1(tx4938_pcicptr);
-
-	tx4938_report_pciclk();
-	tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
-	if (txboard_pci66_mode == 0 &&
-	    txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) {
-		/* Reset PCI Bus */
-		writeb(0, rbtx4938_pcireset_addr);
-		/* Reset PCIC */
-		tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST;
-		tx4938_pciclk66_setup();
-		mdelay(10);
-		/* clear PCIC reset */
-		tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST;
-		writeb(1, rbtx4938_pcireset_addr);
-		mmiowb();
-		/* Reinitialize PCIC */
-		tx4938_report_pciclk();
-		tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb);
-	}
-
-	mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]);
-	io_base[1] = txboard_request_phys_region_shrink(&io_size[1]);
-	/* Reset PCIC1 */
-	tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST;
-	/* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */
-	if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD))
-		tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66;
-	else
-		tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66;
-	mdelay(10);
-	/* clear PCIC1 reset */
-	tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
-	tx4938_report_pcic_status1(tx4938_pcic1ptr);
-
-	printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x",
-	       (unsigned short)(tx4938_pcic1ptr->pciid >> 16),
-	       (unsigned short)(tx4938_pcic1ptr->pciid & 0xffff),
-	       (unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff));
-	printk("%s PCICLK:%dMHz\n",
-	       (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "",
-	       txx9_gbus_clock /
-	       ((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) /
-	       1000000);
-
-	/* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */
-	tx4938_pci_controller[1].io_resource->start =
-		io_base[1] - io_base[0];
-	tx4938_pci_controller[1].io_resource->end =
-		io_base[1] - io_base[0] + io_size[1] - 1;
-	tx4938_pci_controller[1].mem_resource->start = mem_base[1];
-	tx4938_pci_controller[1].mem_resource->end =
-		mem_base[1] + mem_size[1] - 1;
-	set_tx4938_pcicptr(1, tx4938_pcic1ptr);
-
-	register_pci_controller(&tx4938_pci_controller[1]);
-
-	tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb);
-
-	/* map ioport 0 to PCI I/O space address 0 */
-	set_io_port_base(KSEG1 + io_base[0]);
-
-	return 0;
-}
-
-arch_initcall(tx4938_pcibios_init);
-
-#endif /* CONFIG_PCI */
-
-/* SPI support */
-
-/* chip select for SPI devices */
-#define	SEEPROM1_CS	7	/* PIO7 */
-#define	SEEPROM2_CS	0	/* IOC */
-#define	SEEPROM3_CS	1	/* IOC */
-#define	SRTC_CS	2	/* IOC */
-
-#ifdef CONFIG_PCI
-static int __init rbtx4938_ethaddr_init(void)
-{
-	unsigned char dat[17];
-	unsigned char sum;
-	int i;
-
-	/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
-	if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) {
-		printk(KERN_ERR "seeprom: read error.\n");
-		return -ENODEV;
-	} else {
-		if (strcmp(dat, "MAC") != 0)
-			printk(KERN_WARNING "seeprom: bad signature.\n");
-		for (i = 0, sum = 0; i < sizeof(dat); i++)
-			sum += dat[i];
-		if (sum)
-			printk(KERN_WARNING "seeprom: bad checksum.\n");
-	}
-	for (i = 0; i < 2; i++) {
-		unsigned int id =
-			TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0);
-		struct platform_device *pdev;
-		if (!(tx4938_ccfgptr->pcfg &
-		      (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL)))
-			continue;
-		pdev = platform_device_alloc("tc35815-mac", id);
-		if (!pdev ||
-		    platform_device_add_data(pdev, &dat[4 + 6 * i], 6) ||
-		    platform_device_add(pdev))
-			platform_device_put(pdev);
-	}
-	return 0;
-}
-device_initcall(rbtx4938_ethaddr_init);
-#endif /* CONFIG_PCI */
-
-static void __init rbtx4938_spi_setup(void)
-{
-	/* set SPI_SEL */
-	tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL;
-}
-
-static struct resource rbtx4938_fpga_resource;
-
-static char pcode_str[8];
-static struct resource tx4938_reg_resource = {
-	.start	= TX4938_REG_BASE,
-	.end	= TX4938_REG_BASE + TX4938_REG_SIZE,
-	.name	= pcode_str,
-	.flags	= IORESOURCE_MEM
-};
-
-void __init tx4938_board_setup(void)
-{
-	int i;
-	unsigned long divmode;
-	int cpuclk = 0;
-	unsigned long pcode = TX4938_REV_PCODE();
-
-	ioport_resource.start = 0x1000;
-	ioport_resource.end = 0xffffffff;
-	iomem_resource.start = 0x1000;
-	iomem_resource.end = 0xffffffff;	/* expand to 4GB */
-
-	sprintf(pcode_str, "TX%lx", pcode);
-	/* SDRAMC,EBUSC are configured by PROM */
-	for (i = 0; i < 8; i++) {
-		if (!(tx4938_ebuscptr->cr[i] & 0x8))
-			continue;	/* disabled */
-		rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i);
-		txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i));
-	}
-
-	/* clocks */
-	if (txx9_master_clock) {
-		/* calculate gbus_clock and cpu_clock_freq from master_clock */
-		divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
-		switch (divmode) {
-		case TX4938_CCFG_DIVMODE_8:
-		case TX4938_CCFG_DIVMODE_10:
-		case TX4938_CCFG_DIVMODE_12:
-		case TX4938_CCFG_DIVMODE_16:
-		case TX4938_CCFG_DIVMODE_18:
-			txx9_gbus_clock = txx9_master_clock * 4; break;
-		default:
-			txx9_gbus_clock = txx9_master_clock;
-		}
-		switch (divmode) {
-		case TX4938_CCFG_DIVMODE_2:
-		case TX4938_CCFG_DIVMODE_8:
-			cpuclk = txx9_gbus_clock * 2; break;
-		case TX4938_CCFG_DIVMODE_2_5:
-		case TX4938_CCFG_DIVMODE_10:
-			cpuclk = txx9_gbus_clock * 5 / 2; break;
-		case TX4938_CCFG_DIVMODE_3:
-		case TX4938_CCFG_DIVMODE_12:
-			cpuclk = txx9_gbus_clock * 3; break;
-		case TX4938_CCFG_DIVMODE_4:
-		case TX4938_CCFG_DIVMODE_16:
-			cpuclk = txx9_gbus_clock * 4; break;
-		case TX4938_CCFG_DIVMODE_4_5:
-		case TX4938_CCFG_DIVMODE_18:
-			cpuclk = txx9_gbus_clock * 9 / 2; break;
-		}
-		txx9_cpu_clock = cpuclk;
-	} else {
-		if (txx9_cpu_clock == 0) {
-			txx9_cpu_clock = 300000000;	/* 300MHz */
-		}
-		/* calculate gbus_clock and master_clock from cpu_clock_freq */
-		cpuclk = txx9_cpu_clock;
-		divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK;
-		switch (divmode) {
-		case TX4938_CCFG_DIVMODE_2:
-		case TX4938_CCFG_DIVMODE_8:
-			txx9_gbus_clock = cpuclk / 2; break;
-		case TX4938_CCFG_DIVMODE_2_5:
-		case TX4938_CCFG_DIVMODE_10:
-			txx9_gbus_clock = cpuclk * 2 / 5; break;
-		case TX4938_CCFG_DIVMODE_3:
-		case TX4938_CCFG_DIVMODE_12:
-			txx9_gbus_clock = cpuclk / 3; break;
-		case TX4938_CCFG_DIVMODE_4:
-		case TX4938_CCFG_DIVMODE_16:
-			txx9_gbus_clock = cpuclk / 4; break;
-		case TX4938_CCFG_DIVMODE_4_5:
-		case TX4938_CCFG_DIVMODE_18:
-			txx9_gbus_clock = cpuclk * 2 / 9; break;
-		}
-		switch (divmode) {
-		case TX4938_CCFG_DIVMODE_8:
-		case TX4938_CCFG_DIVMODE_10:
-		case TX4938_CCFG_DIVMODE_12:
-		case TX4938_CCFG_DIVMODE_16:
-		case TX4938_CCFG_DIVMODE_18:
-			txx9_master_clock = txx9_gbus_clock / 4; break;
-		default:
-			txx9_master_clock = txx9_gbus_clock;
-		}
-	}
-	/* change default value to udelay/mdelay take reasonable time */
-	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
-
-	/* CCFG */
-	/* clear WatchDogReset,BusErrorOnWrite flag (W1C) */
-	tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW;
-	/* do reset on watchdog */
-	tx4938_ccfgptr->ccfg |= TX4938_CCFG_WR;
-	/* clear PCIC1 reset */
-	if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST)
-		tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST;
-
-	/* enable Timeout BusError */
-	if (tx4938_ccfg_toeon)
-		tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE;
-
-	/* DMA selection */
-	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL;
-
-	/* Use external clock for external arbiter */
-	if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB))
-		tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL;
-
-	printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n",
-	       pcode_str,
-	       cpuclk / 1000000, txx9_master_clock / 1000000,
-	       (unsigned long)tx4938_ccfgptr->crir,
-	       tx4938_ccfgptr->ccfg,
-	       tx4938_ccfgptr->pcfg);
-
-	printk("%s SDRAMC --", pcode_str);
-	for (i = 0; i < 4; i++) {
-		unsigned long long cr = tx4938_sdramcptr->cr[i];
-		unsigned long ram_base, ram_size;
-		if (!((unsigned long)cr & 0x00000400))
-			continue;	/* disabled */
-		ram_base = (unsigned long)(cr >> 49) << 21;
-		ram_size = ((unsigned long)(cr >> 33) + 1) << 21;
-		if (ram_base >= 0x20000000)
-			continue;	/* high memory (ignore) */
-		printk(" CR%d:%016Lx", i, cr);
-		txboard_add_phys_region(ram_base, ram_size);
-	}
-	printk(" TR:%09Lx\n", tx4938_sdramcptr->tr);
-
-	/* SRAM */
-	if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) {
-		unsigned int size = 0x800;
-		unsigned long base =
-			(tx4938_sramcptr->cr >> (39-11)) & ~(size - 1);
-		 txboard_add_phys_region(base, size);
-	}
-
-	/* TMR */
-	for (i = 0; i < TX4938_NR_TMR; i++)
-		txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL);
-
-	/* enable DMA */
-	for (i = 0; i < 2; i++)
-		____raw_writeq(TX4938_DMA_MCR_MSTEN,
-			       (void __iomem *)(TX4938_DMA_REG(i) + 0x50));
-
-	/* PIO */
-	__raw_writel(0, &tx4938_pioptr->maskcpu);
-	__raw_writel(0, &tx4938_pioptr->maskext);
-
-	/* TX4938 internal registers */
-	if (request_resource(&iomem_resource, &tx4938_reg_resource))
-		printk("request resource for internal registers failed\n");
-}
-
-#ifdef CONFIG_PCI
-static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr)
-{
-	unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16);
-	unsigned long g2pstatus = pcicptr->g2pstatus;
-	unsigned long pcicstatus = pcicptr->pcicstatus;
-	static struct {
-		unsigned long flag;
-		const char *str;
-	} pcistat_tbl[] = {
-		{ PCI_STATUS_DETECTED_PARITY,	"DetectedParityError" },
-		{ PCI_STATUS_SIG_SYSTEM_ERROR,	"SignaledSystemError" },
-		{ PCI_STATUS_REC_MASTER_ABORT,	"ReceivedMasterAbort" },
-		{ PCI_STATUS_REC_TARGET_ABORT,	"ReceivedTargetAbort" },
-		{ PCI_STATUS_SIG_TARGET_ABORT,	"SignaledTargetAbort" },
-		{ PCI_STATUS_PARITY,	"MasterParityError" },
-	}, g2pstat_tbl[] = {
-		{ TX4938_PCIC_G2PSTATUS_TTOE,	"TIOE" },
-		{ TX4938_PCIC_G2PSTATUS_RTOE,	"RTOE" },
-	}, pcicstat_tbl[] = {
-		{ TX4938_PCIC_PCICSTATUS_PME,	"PME" },
-		{ TX4938_PCIC_PCICSTATUS_TLB,	"TLB" },
-		{ TX4938_PCIC_PCICSTATUS_NIB,	"NIB" },
-		{ TX4938_PCIC_PCICSTATUS_ZIB,	"ZIB" },
-		{ TX4938_PCIC_PCICSTATUS_PERR,	"PERR" },
-		{ TX4938_PCIC_PCICSTATUS_SERR,	"SERR" },
-		{ TX4938_PCIC_PCICSTATUS_GBE,	"GBE" },
-		{ TX4938_PCIC_PCICSTATUS_IWB,	"IWB" },
-	};
-	int i;
-
-	printk("pcistat:%04x(", pcistatus);
-	for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++)
-		if (pcistatus & pcistat_tbl[i].flag)
-			printk("%s ", pcistat_tbl[i].str);
-	printk("), g2pstatus:%08lx(", g2pstatus);
-	for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++)
-		if (g2pstatus & g2pstat_tbl[i].flag)
-			printk("%s ", g2pstat_tbl[i].str);
-	printk("), pcicstatus:%08lx(", pcicstatus);
-	for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++)
-		if (pcicstatus & pcicstat_tbl[i].flag)
-			printk("%s ", pcicstat_tbl[i].str);
-	printk(")\n");
-}
-
-void tx4938_report_pcic_status(void)
-{
-	int i;
-	struct tx4938_pcic_reg *pcicptr;
-	for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++)
-		tx4938_report_pcic_status1(pcicptr);
-}
-
-#endif /* CONFIG_PCI */
-
-void __init plat_time_init(void)
-{
-	mips_hpt_frequency = txx9_cpu_clock / 2;
-	if (tx4938_ccfgptr->ccfg & TX4938_CCFG_TINTDIS)
-		txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL,
-				     TXX9_IRQ_BASE + TX4938_IR_TMR(0),
-				     txx9_gbus_clock / 2);
-}
-
-void __init plat_mem_setup(void)
-{
-	unsigned long long pcfg;
-	char *argptr;
-
-	iomem_resource.end = 0xffffffff;	/* 4GB */
-
-	if (txx9_master_clock == 0)
-		txx9_master_clock = 25000000; /* 25MHz */
-	tx4938_board_setup();
-#ifndef CONFIG_PCI
-	set_io_port_base(RBTX4938_ETHER_BASE);
-#endif
-
-#ifdef CONFIG_SERIAL_TXX9
-	{
-		extern int early_serial_txx9_setup(struct uart_port *port);
-		int i;
-		struct uart_port req;
-		for(i = 0; i < 2; i++) {
-			memset(&req, 0, sizeof(req));
-			req.line = i;
-			req.iotype = UPIO_MEM;
-			req.membase = (char *)(0xff1ff300 + i * 0x100);
-			req.mapbase = 0xff1ff300 + i * 0x100;
-			req.irq = RBTX4938_IRQ_IRC_SIO(i);
-			req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
-			req.uartclk = 50000000;
-			early_serial_txx9_setup(&req);
-		}
-	}
-#ifdef CONFIG_SERIAL_TXX9_CONSOLE
-        argptr = prom_getcmdline();
-        if (strstr(argptr, "console=") == NULL) {
-                strcat(argptr, " console=ttyS0,38400");
-        }
-#endif
-#endif
-
-#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
-	printk("PIOSEL: disabling both ata and nand selection\n");
-	local_irq_disable();
-	tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
-#endif
-
-#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
-	printk("PIOSEL: enabling nand selection\n");
-	tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL;
-	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL;
-#endif
-
-#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
-	printk("PIOSEL: enabling ata selection\n");
-	tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL;
-	tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL;
-#endif
-
-#ifdef CONFIG_IP_PNP
-	argptr = prom_getcmdline();
-	if (strstr(argptr, "ip=") == NULL) {
-		strcat(argptr, " ip=any");
-	}
-#endif
-
-
-#ifdef CONFIG_FB
-	{
-		conswitchp = &dummy_con;
-	}
-#endif
-
-	rbtx4938_spi_setup();
-	pcfg = tx4938_ccfgptr->pcfg;	/* updated */
-	/* fixup piosel */
-	if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
-	    TX4938_PCFG_ATA_SEL)
-		writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x04,
-		       rbtx4938_piosel_addr);
-	else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
-		 TX4938_PCFG_NDF_SEL)
-		writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x08,
-		       rbtx4938_piosel_addr);
-	else
-		writeb(readb(rbtx4938_piosel_addr) & ~(0x08 | 0x04),
-		       rbtx4938_piosel_addr);
-
-	rbtx4938_fpga_resource.name = "FPGA Registers";
-	rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
-	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
-	rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-	if (request_resource(&iomem_resource, &rbtx4938_fpga_resource))
-		printk("request resource for fpga failed\n");
-
-	_machine_restart = rbtx4938_machine_restart;
-	_machine_halt = rbtx4938_machine_halt;
-	pm_power_off = rbtx4938_machine_power_off;
-
-	writeb(0xff, rbtx4938_led_addr);
-	printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
-	       readb(rbtx4938_fpga_rev_addr),
-	       readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
-}
-
-static int __init rbtx4938_ne_init(void)
-{
-	struct resource res[] = {
-		{
-			.start	= RBTX4938_RTL_8019_BASE,
-			.end	= RBTX4938_RTL_8019_BASE + 0x20 - 1,
-			.flags	= IORESOURCE_IO,
-		}, {
-			.start	= RBTX4938_RTL_8019_IRQ,
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("ne", -1,
-						res, ARRAY_SIZE(res));
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-device_initcall(rbtx4938_ne_init);
-
-/* GPIO support */
-
-int gpio_to_irq(unsigned gpio)
-{
-	return -EINVAL;
-}
-
-int irq_to_gpio(unsigned irq)
-{
-	return -EINVAL;
-}
-
-static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
-
-static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset,
-				  int value)
-{
-	u8 val;
-	unsigned long flags;
-	spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags);
-	val = readb(rbtx4938_spics_addr);
-	if (value)
-		val |= 1 << offset;
-	else
-		val &= ~(1 << offset);
-	writeb(val, rbtx4938_spics_addr);
-	mmiowb();
-	spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags);
-}
-
-static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip,
-				     unsigned int offset, int value)
-{
-	rbtx4938_spi_gpio_set(chip, offset, value);
-	return 0;
-}
-
-static struct gpio_chip rbtx4938_spi_gpio_chip = {
-	.set = rbtx4938_spi_gpio_set,
-	.direction_output = rbtx4938_spi_gpio_dir_out,
-	.label = "RBTX4938-SPICS",
-	.base = 16,
-	.ngpio = 3,
-};
-
-/* SPI support */
-
-static void __init txx9_spi_init(unsigned long base, int irq)
-{
-	struct resource res[] = {
-		{
-			.start	= base,
-			.end	= base + 0x20 - 1,
-			.flags	= IORESOURCE_MEM,
-		}, {
-			.start	= irq,
-			.flags	= IORESOURCE_IRQ,
-		},
-	};
-	platform_device_register_simple("spi_txx9", 0,
-					res, ARRAY_SIZE(res));
-}
-
-static int __init rbtx4938_spi_init(void)
-{
-	struct spi_board_info srtc_info = {
-		.modalias = "rtc-rs5c348",
-		.max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */
-		.bus_num = 0,
-		.chip_select = 16 + SRTC_CS,
-		/* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS  */
-		.mode = SPI_MODE_1 | SPI_CS_HIGH,
-	};
-	spi_register_board_info(&srtc_info, 1);
-	spi_eeprom_register(SEEPROM1_CS);
-	spi_eeprom_register(16 + SEEPROM2_CS);
-	spi_eeprom_register(16 + SEEPROM3_CS);
-	gpio_request(16 + SRTC_CS, "rtc-rs5c348");
-	gpio_direction_output(16 + SRTC_CS, 0);
-	gpio_request(SEEPROM1_CS, "seeprom1");
-	gpio_direction_output(SEEPROM1_CS, 1);
-	gpio_request(16 + SEEPROM2_CS, "seeprom2");
-	gpio_direction_output(16 + SEEPROM2_CS, 1);
-	gpio_request(16 + SEEPROM3_CS, "seeprom3");
-	gpio_direction_output(16 + SEEPROM3_CS, 1);
-	txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI);
-	return 0;
-}
-
-static int __init rbtx4938_arch_init(void)
-{
-	txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16);
-	gpiochip_add(&rbtx4938_spi_gpio_chip);
-	return rbtx4938_spi_init();
-}
-arch_initcall(rbtx4938_arch_init);
-
-/* Watchdog support */
-
-static int __init txx9_wdt_init(unsigned long base)
-{
-	struct resource res = {
-		.start	= base,
-		.end	= base + 0x100 - 1,
-		.flags	= IORESOURCE_MEM,
-	};
-	struct platform_device *dev =
-		platform_device_register_simple("txx9wdt", -1, &res, 1);
-	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
-}
-
-static int __init rbtx4938_wdt_init(void)
-{
-	return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
-}
-device_initcall(rbtx4938_wdt_init);
-
-/* Minimum CLK support */
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	if (!strcmp(id, "spi-baseclk"))
-		return (struct clk *)(txx9_gbus_clock / 2 / 4);
-	if (!strcmp(id, "imbus_clk"))
-		return (struct clk *)(txx9_gbus_clock / 2);
-	return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
-	return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	return (unsigned long)clk;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
diff --git a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c b/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
deleted file mode 100644
index 4d6b4ade5e8c..000000000000
--- a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * linux/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/eeprom.h>
-#include <asm/tx4938/spi.h>
-
-#define AT250X0_PAGE_SIZE	8
-
-/* register board information for at25 driver */
-int __init spi_eeprom_register(int chipid)
-{
-	static struct spi_eeprom eeprom = {
-		.name = "at250x0",
-		.byte_len = 128,
-		.page_size = AT250X0_PAGE_SIZE,
-		.flags = EE_ADDR1,
-	};
-	struct spi_board_info info = {
-		.modalias = "at25",
-		.max_speed_hz = 1500000,	/* 1.5Mbps */
-		.bus_num = 0,
-		.chip_select = chipid,
-		.platform_data = &eeprom,
-		/* Mode 0: High-Active, Sample-Then-Shift */
-	};
-
-	return spi_register_board_info(&info, 1);
-}
-
-/* simple temporary spi driver to provide early access to seeprom. */
-
-static struct read_param {
-	int chipid;
-	int address;
-	unsigned char *buf;
-	int len;
-} *read_param;
-
-static int __init early_seeprom_probe(struct spi_device *spi)
-{
-	int stat = 0;
-	u8 cmd[2];
-	int len = read_param->len;
-	char *buf = read_param->buf;
-	int address = read_param->address;
-
-	dev_info(&spi->dev, "spiclk %u KHz.\n",
-		 (spi->max_speed_hz + 500) / 1000);
-	if (read_param->chipid != spi->chip_select)
-		return -ENODEV;
-	while (len > 0) {
-		/* spi_write_then_read can only work with small chunk */
-		int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE;
-		cmd[0] = 0x03;	/* AT25_READ */
-		cmd[1] = address;
-		stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c);
-		buf += c;
-		len -= c;
-		address += c;
-	}
-	return stat;
-}
-
-static struct spi_driver early_seeprom_driver __initdata = {
-	.driver = {
-		.name	= "at25",
-		.owner	= THIS_MODULE,
-	},
-	.probe	= early_seeprom_probe,
-};
-
-int __init spi_eeprom_read(int chipid, int address,
-			   unsigned char *buf, int len)
-{
-	int ret;
-	struct read_param param = {
-		.chipid = chipid,
-		.address = address,
-		.buf = buf,
-		.len = len
-	};
-
-	read_param = &param;
-	ret = spi_register_driver(&early_seeprom_driver);
-	if (!ret)
-		spi_unregister_driver(&early_seeprom_driver);
-	return ret;
-}
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
new file mode 100644
index 000000000000..840fe757c48d
--- /dev/null
+++ b/arch/mips/txx9/Kconfig
@@ -0,0 +1,110 @@
+config MACH_TX39XX
+	bool
+	select MACH_TXX9
+	select SYS_HAS_CPU_TX39XX
+
+config MACH_TX49XX
+	bool
+	select MACH_TXX9
+	select CEVT_R4K
+	select CSRC_R4K
+	select IRQ_CPU
+	select SYS_HAS_CPU_TX49XX
+	select SYS_SUPPORTS_64BIT_KERNEL
+
+config MACH_TXX9
+	bool
+	select DMA_NONCOHERENT
+	select SWAP_IO_SPACE
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+
+config TOSHIBA_JMR3927
+	bool "Toshiba JMR-TX3927 board"
+	depends on MACH_TX39XX
+	select SOC_TX3927
+
+config TOSHIBA_RBTX4927
+	bool "Toshiba RBTX49[23]7 board"
+	depends on MACH_TX49XX
+	select SOC_TX4927
+	# TX4937 is subset of TX4938
+	select SOC_TX4938
+	help
+	  This Toshiba board is based on the TX4927 processor. Say Y here to
+	  support this machine type
+
+config TOSHIBA_RBTX4938
+	bool "Toshiba RBTX4938 board"
+	depends on MACH_TX49XX
+	select SOC_TX4938
+	help
+	  This Toshiba board is based on the TX4938 processor. Say Y here to
+	  support this machine type
+
+config SOC_TX3927
+	bool
+	select CEVT_TXX9
+	select HAS_TXX9_SERIAL
+	select HW_HAS_PCI
+	select IRQ_TXX9
+	select GPIO_TXX9
+
+config SOC_TX4927
+	bool
+	select CEVT_TXX9
+	select HAS_TXX9_SERIAL
+	select HW_HAS_PCI
+	select IRQ_TXX9
+	select PCI_TX4927
+	select GPIO_TXX9
+
+config SOC_TX4938
+	bool
+	select CEVT_TXX9
+	select HAS_TXX9_SERIAL
+	select HW_HAS_PCI
+	select IRQ_TXX9
+	select PCI_TX4927
+	select GPIO_TXX9
+
+config TOSHIBA_FPCIB0
+	bool "FPCIB0 Backplane Support"
+	depends on PCI && MACH_TXX9
+	select I8259
+
+config PICMG_PCI_BACKPLANE_DEFAULT
+	bool "Support for PICMG PCI Backplane"
+	depends on PCI && MACH_TXX9
+	default y if !TOSHIBA_FPCIB0
+
+if TOSHIBA_RBTX4938
+
+comment "Multiplex Pin Select"
+choice
+	prompt "PIO[58:61]"
+	default TOSHIBA_RBTX4938_MPLEX_PIO58_61
+
+config TOSHIBA_RBTX4938_MPLEX_PIO58_61
+	bool "PIO"
+config TOSHIBA_RBTX4938_MPLEX_NAND
+	bool "NAND"
+config TOSHIBA_RBTX4938_MPLEX_ATA
+	bool "ATA"
+
+endchoice
+
+config TX4938_NAND_BOOT
+	depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND
+	bool "NAND Boot Support (EXPERIMENTAL)"
+	help
+	  This is only for Toshiba RBTX4938 reference board, which has NAND IPL.
+	  Select this option if you need to use NAND boot.
+
+endif
+
+config PCI_TX4927
+	bool
diff --git a/arch/mips/txx9/generic/Makefile b/arch/mips/txx9/generic/Makefile
new file mode 100644
index 000000000000..9bb34af26b73
--- /dev/null
+++ b/arch/mips/txx9/generic/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for common code for TXx9 based systems
+#
+
+obj-y	+= setup.o
+obj-$(CONFIG_PCI)	+= pci.o
+obj-$(CONFIG_SOC_TX3927)	+= setup_tx3927.o irq_tx3927.o
+obj-$(CONFIG_SOC_TX4927)	+= mem_tx4927.o setup_tx4927.o irq_tx4927.o
+obj-$(CONFIG_SOC_TX4938)	+= mem_tx4927.o setup_tx4938.o irq_tx4938.o
+obj-$(CONFIG_TOSHIBA_FPCIB0)	+= smsc_fdc37m81x.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/generic/irq_tx3927.c b/arch/mips/txx9/generic/irq_tx3927.c
new file mode 100644
index 000000000000..c683f593eda2
--- /dev/null
+++ b/arch/mips/txx9/generic/irq_tx3927.c
@@ -0,0 +1,25 @@
+/*
+ * Common tx3927 irq handler
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ */
+#include <linux/init.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_irq_init(void)
+{
+	int i;
+
+	txx9_irq_init(TX3927_IRC_REG);
+	/* raise priority for timers, sio */
+	for (i = 0; i < TX3927_NR_TMR; i++)
+		txx9_irq_set_pri(TX3927_IR_TMR(i), 6);
+	for (i = 0; i < TX3927_NR_SIO; i++)
+		txx9_irq_set_pri(TX3927_IR_SIO(i), 7);
+}
diff --git a/arch/mips/txx9/generic/irq_tx4927.c b/arch/mips/txx9/generic/irq_tx4927.c
new file mode 100644
index 000000000000..cbea1fdde82b
--- /dev/null
+++ b/arch/mips/txx9/generic/irq_tx4927.c
@@ -0,0 +1,37 @@
+/*
+ * Common tx4927 irq handler
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/irq_cpu.h>
+#include <asm/txx9/tx4927.h>
+
+void __init tx4927_irq_init(void)
+{
+	mips_cpu_irq_init();
+	txx9_irq_init(TX4927_IRC_REG & 0xfffffffffULL);
+	set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4927_IRC_INT,
+				handle_simple_irq);
+}
diff --git a/arch/mips/txx9/generic/irq_tx4938.c b/arch/mips/txx9/generic/irq_tx4938.c
new file mode 100644
index 000000000000..6eac684bf190
--- /dev/null
+++ b/arch/mips/txx9/generic/irq_tx4938.c
@@ -0,0 +1,25 @@
+/*
+ * linux/arch/mips/tx4938/common/irq.c
+ *
+ * Common tx4938 irq handler
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/irq_cpu.h>
+#include <asm/txx9/tx4938.h>
+
+void __init tx4938_irq_init(void)
+{
+	mips_cpu_irq_init();
+	txx9_irq_init(TX4938_IRC_REG & 0xfffffffffULL);
+	set_irq_chained_handler(MIPS_CPU_IRQ_BASE + TX4938_IRC_INT,
+				handle_simple_irq);
+}
diff --git a/arch/mips/txx9/generic/mem_tx4927.c b/arch/mips/txx9/generic/mem_tx4927.c
new file mode 100644
index 000000000000..ef6ea6e97873
--- /dev/null
+++ b/arch/mips/txx9/generic/mem_tx4927.c
@@ -0,0 +1,77 @@
+/*
+ * linux/arch/mips/txx9/generic/mem_tx4927.c
+ *
+ * common tx4927 memory interface
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <asm/txx9/tx4927.h>
+
+static unsigned int __init tx4927_process_sdccr(u64 __iomem *addr)
+{
+	u64 val;
+	unsigned int sdccr_ce;
+	unsigned int sdccr_bs;
+	unsigned int sdccr_rs;
+	unsigned int sdccr_cs;
+	unsigned int sdccr_mw;
+	unsigned int bs = 0;
+	unsigned int rs = 0;
+	unsigned int cs = 0;
+	unsigned int mw = 0;
+
+	val = __raw_readq(addr);
+
+	/* MVMCP -- need #defs for these bits masks */
+	sdccr_ce = ((val & (1 << 10)) >> 10);
+	sdccr_bs = ((val & (1 << 8)) >> 8);
+	sdccr_rs = ((val & (3 << 5)) >> 5);
+	sdccr_cs = ((val & (7 << 2)) >> 2);
+	sdccr_mw = ((val & (1 << 0)) >> 0);
+
+	if (sdccr_ce) {
+		bs = 2 << sdccr_bs;
+		rs = 2048 << sdccr_rs;
+		cs = 256 << sdccr_cs;
+		mw = 8 >> sdccr_mw;
+	}
+
+	return rs * cs * mw * bs;
+}
+
+unsigned int __init tx4927_get_mem_size(void)
+{
+	unsigned int total = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(tx4927_sdramcptr->cr); i++)
+		total += tx4927_process_sdccr(&tx4927_sdramcptr->cr[i]);
+	return total;
+}
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
new file mode 100644
index 000000000000..7b637a7c0e66
--- /dev/null
+++ b/arch/mips/txx9/generic/pci.c
@@ -0,0 +1,424 @@
+/*
+ * linux/arch/mips/txx9/pci.c
+ *
+ * Based on linux/arch/mips/txx9/rbtx4927/setup.c,
+ *          linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * Copyright 2001-2005 MontaVista Software Inc.
+ * Copyright (C) 1996, 97, 2001, 04  Ralf Baechle (ralf@linux-mips.org)
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/io.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
+#ifdef CONFIG_TOSHIBA_FPCIB0
+#include <linux/interrupt.h>
+#include <asm/i8259.h>
+#include <asm/txx9/smsc_fdc37m81x.h>
+#endif
+
+static int __init
+early_read_config_word(struct pci_controller *hose,
+		       int top_bus, int bus, int devfn, int offset, u16 *value)
+{
+	struct pci_dev fake_dev;
+	struct pci_bus fake_bus;
+
+	fake_dev.bus = &fake_bus;
+	fake_dev.sysdata = hose;
+	fake_dev.devfn = devfn;
+	fake_bus.number = bus;
+	fake_bus.sysdata = hose;
+	fake_bus.ops = hose->pci_ops;
+
+	if (bus != top_bus)
+		/* Fake a parent bus structure. */
+		fake_bus.parent = &fake_bus;
+	else
+		fake_bus.parent = NULL;
+
+	return pci_read_config_word(&fake_dev, offset, value);
+}
+
+int __init txx9_pci66_check(struct pci_controller *hose, int top_bus,
+			    int current_bus)
+{
+	u32 pci_devfn;
+	unsigned short vid;
+	int cap66 = -1;
+	u16 stat;
+
+	/* It seems SLC90E66 needs some time after PCI reset... */
+	mdelay(80);
+
+	printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n");
+
+	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
+		if (PCI_FUNC(pci_devfn))
+			continue;
+		if (early_read_config_word(hose, top_bus, current_bus,
+					   pci_devfn, PCI_VENDOR_ID, &vid) !=
+		    PCIBIOS_SUCCESSFUL)
+			continue;
+		if (vid == 0xffff)
+			continue;
+
+		/* check 66MHz capability */
+		if (cap66 < 0)
+			cap66 = 1;
+		if (cap66) {
+			early_read_config_word(hose, top_bus, current_bus,
+					       pci_devfn, PCI_STATUS, &stat);
+			if (!(stat & PCI_STATUS_66MHZ)) {
+				printk(KERN_DEBUG
+				       "PCI: %02x:%02x not 66MHz capable.\n",
+				       current_bus, pci_devfn);
+				cap66 = 0;
+				break;
+			}
+		}
+	}
+	return cap66 > 0;
+}
+
+static struct resource primary_pci_mem_res[2] = {
+	{ .name = "PCI MEM" },
+	{ .name = "PCI MMIO" },
+};
+static struct resource primary_pci_io_res = { .name = "PCI IO" };
+struct pci_controller txx9_primary_pcic = {
+	.mem_resource = &primary_pci_mem_res[0],
+	.io_resource = &primary_pci_io_res,
+};
+
+#ifdef CONFIG_64BIT
+int txx9_pci_mem_high __initdata = 1;
+#else
+int txx9_pci_mem_high __initdata;
+#endif
+
+/*
+ * allocate pci_controller and resources.
+ * mem_base, io_base: physical addresss.  0 for auto assignment.
+ * mem_size and io_size means max size on auto assignment.
+ * pcic must be &txx9_primary_pcic or NULL.
+ */
+struct pci_controller *__init
+txx9_alloc_pci_controller(struct pci_controller *pcic,
+			  unsigned long mem_base, unsigned long mem_size,
+			  unsigned long io_base, unsigned long io_size)
+{
+	struct pcic {
+		struct pci_controller c;
+		struct resource r_mem[2];
+		struct resource r_io;
+	} *new = NULL;
+	int min_size = 0x10000;
+
+	if (!pcic) {
+		new = kzalloc(sizeof(*new), GFP_KERNEL);
+		if (!new)
+			return NULL;
+		new->r_mem[0].name = "PCI mem";
+		new->r_mem[1].name = "PCI mmio";
+		new->r_io.name = "PCI io";
+		new->c.mem_resource = new->r_mem;
+		new->c.io_resource = &new->r_io;
+		pcic = &new->c;
+	} else
+		BUG_ON(pcic != &txx9_primary_pcic);
+	pcic->io_resource->flags = IORESOURCE_IO;
+
+	/*
+	 * for auto assignment, first search a (big) region for PCI
+	 * MEM, then search a region for PCI IO.
+	 */
+	if (mem_base) {
+		pcic->mem_resource[0].start = mem_base;
+		pcic->mem_resource[0].end = mem_base + mem_size - 1;
+		if (request_resource(&iomem_resource, &pcic->mem_resource[0]))
+			goto free_and_exit;
+	} else {
+		unsigned long min = 0, max = 0x20000000; /* low 512MB */
+		if (!mem_size) {
+			/* default size for auto assignment */
+			if (txx9_pci_mem_high)
+				mem_size = 0x20000000;	/* mem:512M(max) */
+			else
+				mem_size = 0x08000000;	/* mem:128M(max) */
+		}
+		if (txx9_pci_mem_high) {
+			min = 0x20000000;
+			max = 0xe0000000;
+		}
+		/* search free region for PCI MEM */
+		for (; mem_size >= min_size; mem_size /= 2) {
+			if (allocate_resource(&iomem_resource,
+					      &pcic->mem_resource[0],
+					      mem_size, min, max,
+					      mem_size, NULL, NULL) == 0)
+				break;
+		}
+		if (mem_size < min_size)
+			goto free_and_exit;
+	}
+
+	pcic->mem_resource[1].flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	if (io_base) {
+		pcic->mem_resource[1].start = io_base;
+		pcic->mem_resource[1].end = io_base + io_size - 1;
+		if (request_resource(&iomem_resource, &pcic->mem_resource[1]))
+			goto release_and_exit;
+	} else {
+		if (!io_size)
+			/* default size for auto assignment */
+			io_size = 0x01000000;	/* io:16M(max) */
+		/* search free region for PCI IO in low 512MB */
+		for (; io_size >= min_size; io_size /= 2) {
+			if (allocate_resource(&iomem_resource,
+					      &pcic->mem_resource[1],
+					      io_size, 0, 0x20000000,
+					      io_size, NULL, NULL) == 0)
+				break;
+		}
+		if (io_size < min_size)
+			goto release_and_exit;
+		io_base = pcic->mem_resource[1].start;
+	}
+
+	pcic->mem_resource[0].flags = IORESOURCE_MEM;
+	if (pcic == &txx9_primary_pcic &&
+	    mips_io_port_base == (unsigned long)-1) {
+		/* map ioport 0 to PCI I/O space address 0 */
+		set_io_port_base(IO_BASE + pcic->mem_resource[1].start);
+		pcic->io_resource->start = 0;
+		pcic->io_offset = 0;	/* busaddr == ioaddr */
+		pcic->io_map_base = IO_BASE + pcic->mem_resource[1].start;
+	} else {
+		/* physaddr to ioaddr */
+		pcic->io_resource->start =
+			io_base - (mips_io_port_base - IO_BASE);
+		pcic->io_offset = io_base - (mips_io_port_base - IO_BASE);
+		pcic->io_map_base = mips_io_port_base;
+	}
+	pcic->io_resource->end = pcic->io_resource->start + io_size - 1;
+
+	pcic->mem_offset = 0;	/* busaddr == physaddr */
+
+	printk(KERN_INFO "PCI: IO 0x%08llx-0x%08llx MEM 0x%08llx-0x%08llx\n",
+	       (unsigned long long)pcic->mem_resource[1].start,
+	       (unsigned long long)pcic->mem_resource[1].end,
+	       (unsigned long long)pcic->mem_resource[0].start,
+	       (unsigned long long)pcic->mem_resource[0].end);
+
+	/* register_pci_controller() will request MEM resource */
+	release_resource(&pcic->mem_resource[0]);
+	return pcic;
+ release_and_exit:
+	release_resource(&pcic->mem_resource[0]);
+ free_and_exit:
+	kfree(new);
+	printk(KERN_ERR "PCI: Failed to allocate resources.\n");
+	return NULL;
+}
+
+static int __init
+txx9_arch_pci_init(void)
+{
+	PCIBIOS_MIN_IO = 0x8000;	/* reseve legacy I/O space */
+	return 0;
+}
+arch_initcall(txx9_arch_pci_init);
+
+/* IRQ/IDSEL mapping */
+int txx9_pci_option =
+#ifdef CONFIG_PICMG_PCI_BACKPLANE_DEFAULT
+	TXX9_PCI_OPT_PICMG |
+#endif
+	TXX9_PCI_OPT_CLK_AUTO;
+
+enum txx9_pci_err_action txx9_pci_err_action = TXX9_PCI_ERR_REPORT;
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+static irqreturn_t i8259_interrupt(int irq, void *dev_id)
+{
+	int isairq;
+
+	isairq = i8259_irq();
+	if (unlikely(isairq <= I8259A_IRQ_BASE))
+		return IRQ_NONE;
+	generic_handle_irq(isairq);
+	return IRQ_HANDLED;
+}
+
+static int __init
+txx9_i8259_irq_setup(int irq)
+{
+	int err;
+
+	init_i8259_irqs();
+	err = request_irq(irq, &i8259_interrupt, IRQF_DISABLED|IRQF_SHARED,
+			  "cascade(i8259)", (void *)(long)irq);
+	if (!err)
+		printk(KERN_INFO "PCI-ISA bridge PIC (irq %d)\n", irq);
+	return err;
+}
+
+static void __init quirk_slc90e66_bridge(struct pci_dev *dev)
+{
+	int irq;	/* PCI/ISA Bridge interrupt */
+	u8 reg_64;
+	u32 reg_b0;
+	u8 reg_e1;
+	irq = pcibios_map_irq(dev, PCI_SLOT(dev->devfn), 1); /* INTA */
+	if (!irq)
+		return;
+	txx9_i8259_irq_setup(irq);
+	pci_read_config_byte(dev, 0x64, &reg_64);
+	pci_read_config_dword(dev, 0xb0, &reg_b0);
+	pci_read_config_byte(dev, 0xe1, &reg_e1);
+	/* serial irq control */
+	reg_64 = 0xd0;
+	/* serial irq pin */
+	reg_b0 |= 0x00010000;
+	/* ide irq on isa14 */
+	reg_e1 &= 0xf0;
+	reg_e1 |= 0x0d;
+	pci_write_config_byte(dev, 0x64, reg_64);
+	pci_write_config_dword(dev, 0xb0, reg_b0);
+	pci_write_config_byte(dev, 0xe1, reg_e1);
+
+	smsc_fdc37m81x_init(0x3f0);
+	smsc_fdc37m81x_config_beg();
+	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM,
+				  SMSC_FDC37M81X_KBD);
+	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1);
+	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12);
+	smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE,
+				  1);
+	smsc_fdc37m81x_config_end();
+}
+
+static void quirk_slc90e66_ide(struct pci_dev *dev)
+{
+	unsigned char dat;
+	int regs[2] = {0x41, 0x43};
+	int i;
+
+	/* SMSC SLC90E66 IDE uses irq 14, 15 (default) */
+	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 14);
+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &dat);
+	printk(KERN_INFO "PCI: %s: IRQ %02x", pci_name(dev), dat);
+	/* enable SMSC SLC90E66 IDE */
+	for (i = 0; i < ARRAY_SIZE(regs); i++) {
+		pci_read_config_byte(dev, regs[i], &dat);
+		pci_write_config_byte(dev, regs[i], dat | 0x80);
+		pci_read_config_byte(dev, regs[i], &dat);
+		printk(KERN_CONT " IDETIM%d %02x", i, dat);
+	}
+	pci_read_config_byte(dev, 0x5c, &dat);
+	/*
+	 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
+	 *
+	 * This line of code is intended to provide the user with a work
+	 * around solution to the anomalies cited in SMSC's anomaly sheet
+	 * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"".
+	 *
+	 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!!
+	 */
+	dat |= 0x01;
+	pci_write_config_byte(dev, regs[i], dat);
+	pci_read_config_byte(dev, 0x5c, &dat);
+	printk(KERN_CONT " REG5C %02x", dat);
+	printk(KERN_CONT "\n");
+}
+#endif /* CONFIG_TOSHIBA_FPCIB0 */
+
+static void final_fixup(struct pci_dev *dev)
+{
+	unsigned char bist;
+
+	/* Do build-in self test */
+	if (pci_read_config_byte(dev, PCI_BIST, &bist) == PCIBIOS_SUCCESSFUL &&
+	    (bist & PCI_BIST_CAPABLE)) {
+		unsigned long timeout;
+		pci_set_power_state(dev, PCI_D0);
+		printk(KERN_INFO "PCI: %s BIST...", pci_name(dev));
+		pci_write_config_byte(dev, PCI_BIST, PCI_BIST_START);
+		timeout = jiffies + HZ * 2;	/* timeout after 2 sec */
+		do {
+			pci_read_config_byte(dev, PCI_BIST, &bist);
+			if (time_after(jiffies, timeout))
+				break;
+		} while (bist & PCI_BIST_START);
+		if (bist & (PCI_BIST_CODE_MASK | PCI_BIST_START))
+			printk(KERN_CONT "failed. (0x%x)\n", bist);
+		else
+			printk(KERN_CONT "OK.\n");
+	}
+}
+
+#ifdef CONFIG_TOSHIBA_FPCIB0
+#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0,
+	quirk_slc90e66_bridge);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
+	quirk_slc90e66_ide);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1,
+	quirk_slc90e66_ide);
+#endif
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
+DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup);
+
+int pcibios_plat_dev_init(struct pci_dev *dev)
+{
+	return 0;
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	return txx9_board_vec->pci_map_irq(dev, slot, pin);
+}
+
+char * (*txx9_board_pcibios_setup)(char *str) __devinitdata;
+
+char *__devinit txx9_pcibios_setup(char *str)
+{
+	if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str))
+		return NULL;
+	if (!strcmp(str, "picmg")) {
+		/* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX
+		   (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */
+		txx9_pci_option |= TXX9_PCI_OPT_PICMG;
+		return NULL;
+	} else if (!strcmp(str, "nopicmg")) {
+		/* non-PICMG compliant backplane (TOSHIBA
+		   RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */
+		txx9_pci_option &= ~TXX9_PCI_OPT_PICMG;
+		return NULL;
+	} else if (!strncmp(str, "clk=", 4)) {
+		char *val = str + 4;
+		txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK;
+		if (strcmp(val, "33") == 0)
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_33;
+		else if (strcmp(val, "66") == 0)
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_66;
+		else /* "auto" */
+			txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO;
+		return NULL;
+	} else if (!strncmp(str, "err=", 4)) {
+		if (!strcmp(str + 4, "panic"))
+			txx9_pci_err_action = TXX9_PCI_ERR_PANIC;
+		else if (!strcmp(str + 4, "ignore"))
+			txx9_pci_err_action = TXX9_PCI_ERR_IGNORE;
+		return NULL;
+	}
+	return str;
+}
diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c
new file mode 100644
index 000000000000..1bc57d0f4c5c
--- /dev/null
+++ b/arch/mips/txx9/generic/setup.c
@@ -0,0 +1,370 @@
+/*
+ * linux/arch/mips/txx9/generic/setup.c
+ *
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * 2003-2005 (c) MontaVista Software, Inc.
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <asm/bootinfo.h>
+#include <asm/time.h>
+#include <asm/reboot.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
+#ifdef CONFIG_CPU_TX49XX
+#include <asm/txx9/tx4938.h>
+#endif
+
+/* EBUSC settings of TX4927, etc. */
+struct resource txx9_ce_res[8];
+static char txx9_ce_res_name[8][4];	/* "CEn" */
+
+/* pcode, internal register */
+unsigned int txx9_pcode;
+char txx9_pcode_str[8];
+static struct resource txx9_reg_res = {
+	.name = txx9_pcode_str,
+	.flags = IORESOURCE_MEM,
+};
+void __init
+txx9_reg_res_init(unsigned int pcode, unsigned long base, unsigned long size)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(txx9_ce_res); i++) {
+		sprintf(txx9_ce_res_name[i], "CE%d", i);
+		txx9_ce_res[i].flags = IORESOURCE_MEM;
+		txx9_ce_res[i].name = txx9_ce_res_name[i];
+	}
+
+	sprintf(txx9_pcode_str, "TX%x", pcode);
+	if (base) {
+		txx9_reg_res.start = base & 0xfffffffffULL;
+		txx9_reg_res.end = (base & 0xfffffffffULL) + (size - 1);
+		request_resource(&iomem_resource, &txx9_reg_res);
+	}
+}
+
+/* clocks */
+unsigned int txx9_master_clock;
+unsigned int txx9_cpu_clock;
+unsigned int txx9_gbus_clock;
+
+int txx9_ccfg_toeon __initdata = 1;
+
+/* Minimum CLK support */
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+	if (!strcmp(id, "spi-baseclk"))
+		return (struct clk *)((unsigned long)txx9_gbus_clock / 2 / 4);
+	if (!strcmp(id, "imbus_clk"))
+		return (struct clk *)((unsigned long)txx9_gbus_clock / 2);
+	return ERR_PTR(-ENOENT);
+}
+EXPORT_SYMBOL(clk_get);
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return (unsigned long)clk;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+/* GPIO support */
+
+#ifdef CONFIG_GENERIC_GPIO
+int gpio_to_irq(unsigned gpio)
+{
+	return -EINVAL;
+}
+EXPORT_SYMBOL(gpio_to_irq);
+
+int irq_to_gpio(unsigned irq)
+{
+	return -EINVAL;
+}
+EXPORT_SYMBOL(irq_to_gpio);
+#endif
+
+extern struct txx9_board_vec jmr3927_vec;
+extern struct txx9_board_vec rbtx4927_vec;
+extern struct txx9_board_vec rbtx4937_vec;
+extern struct txx9_board_vec rbtx4938_vec;
+
+struct txx9_board_vec *txx9_board_vec __initdata;
+static char txx9_system_type[32];
+
+void __init prom_init_cmdline(void)
+{
+	int argc = (int)fw_arg0;
+	char **argv = (char **)fw_arg1;
+	int i;			/* Always ignore the "-c" at argv[0] */
+#ifdef CONFIG_64BIT
+	char *fixed_argv[32];
+	for (i = 0; i < argc; i++)
+		fixed_argv[i] = (char *)(long)(*((__s32 *)argv + i));
+	argv = fixed_argv;
+#endif
+
+	/* ignore all built-in args if any f/w args given */
+	if (argc > 1)
+		*arcs_cmdline = '\0';
+
+	for (i = 1; i < argc; i++) {
+		if (i != 1)
+			strcat(arcs_cmdline, " ");
+		strcat(arcs_cmdline, argv[i]);
+	}
+}
+
+void __init prom_init(void)
+{
+#ifdef CONFIG_CPU_TX39XX
+	txx9_board_vec = &jmr3927_vec;
+#endif
+#ifdef CONFIG_CPU_TX49XX
+	switch (TX4938_REV_PCODE()) {
+#ifdef CONFIG_TOSHIBA_RBTX4927
+	case 0x4927:
+		txx9_board_vec = &rbtx4927_vec;
+		break;
+	case 0x4937:
+		txx9_board_vec = &rbtx4937_vec;
+		break;
+#endif
+#ifdef CONFIG_TOSHIBA_RBTX4938
+	case 0x4938:
+		txx9_board_vec = &rbtx4938_vec;
+		break;
+#endif
+	}
+#endif
+
+	strcpy(txx9_system_type, txx9_board_vec->system);
+
+	txx9_board_vec->prom_init();
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+const char *get_system_type(void)
+{
+	return txx9_system_type;
+}
+
+char * __init prom_getcmdline(void)
+{
+	return &(arcs_cmdline[0]);
+}
+
+static void __noreturn txx9_machine_halt(void)
+{
+	local_irq_disable();
+	clear_c0_status(ST0_IM);
+	while (1) {
+		if (cpu_wait) {
+			(*cpu_wait)();
+			if (cpu_has_counter) {
+				/*
+				 * Clear counter interrupt while it
+				 * breaks WAIT instruction even if
+				 * masked.
+				 */
+				write_c0_compare(0);
+			}
+		}
+	}
+}
+
+/* Watchdog support */
+void __init txx9_wdt_init(unsigned long base)
+{
+	struct resource res = {
+		.start	= base,
+		.end	= base + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	platform_device_register_simple("txx9wdt", -1, &res, 1);
+}
+
+/* SPI support */
+void __init txx9_spi_init(int busid, unsigned long base, int irq)
+{
+	struct resource res[] = {
+		{
+			.start	= base,
+			.end	= base + 0x20 - 1,
+			.flags	= IORESOURCE_MEM,
+		}, {
+			.start	= irq,
+			.flags	= IORESOURCE_IRQ,
+		},
+	};
+	platform_device_register_simple("spi_txx9", busid,
+					res, ARRAY_SIZE(res));
+}
+
+void __init txx9_ethaddr_init(unsigned int id, unsigned char *ethaddr)
+{
+	struct platform_device *pdev =
+		platform_device_alloc("tc35815-mac", id);
+	if (!pdev ||
+	    platform_device_add_data(pdev, ethaddr, 6) ||
+	    platform_device_add(pdev))
+		platform_device_put(pdev);
+}
+
+void __init txx9_sio_init(unsigned long baseaddr, int irq,
+			  unsigned int line, unsigned int sclk, int nocts)
+{
+#ifdef CONFIG_SERIAL_TXX9
+	struct uart_port req;
+
+	memset(&req, 0, sizeof(req));
+	req.line = line;
+	req.iotype = UPIO_MEM;
+	req.membase = ioremap(baseaddr, 0x24);
+	req.mapbase = baseaddr;
+	req.irq = irq;
+	if (!nocts)
+		req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/;
+	if (sclk) {
+		req.flags |= UPF_MAGIC_MULTIPLIER /*USE_SCLK*/;
+		req.uartclk = sclk;
+	} else
+		req.uartclk = TXX9_IMCLK;
+	early_serial_txx9_setup(&req);
+#endif /* CONFIG_SERIAL_TXX9 */
+}
+
+#ifdef CONFIG_EARLY_PRINTK
+static void __init null_prom_putchar(char c)
+{
+}
+void (*txx9_prom_putchar)(char c) __initdata = null_prom_putchar;
+
+void __init prom_putchar(char c)
+{
+	txx9_prom_putchar(c);
+}
+
+static void __iomem *early_txx9_sio_port;
+
+static void __init early_txx9_sio_putchar(char c)
+{
+#define TXX9_SICISR	0x0c
+#define TXX9_SITFIFO	0x1c
+#define TXX9_SICISR_TXALS	0x00000002
+	while (!(__raw_readl(early_txx9_sio_port + TXX9_SICISR) &
+		 TXX9_SICISR_TXALS))
+		;
+	__raw_writel(c, early_txx9_sio_port + TXX9_SITFIFO);
+}
+
+void __init txx9_sio_putchar_init(unsigned long baseaddr)
+{
+	early_txx9_sio_port = ioremap(baseaddr, 0x24);
+	txx9_prom_putchar = early_txx9_sio_putchar;
+}
+#endif /* CONFIG_EARLY_PRINTK */
+
+/* wrappers */
+void __init plat_mem_setup(void)
+{
+	ioport_resource.start = 0;
+	ioport_resource.end = ~0UL;	/* no limit */
+	iomem_resource.start = 0;
+	iomem_resource.end = ~0UL;	/* no limit */
+
+	/* fallback restart/halt routines */
+	_machine_restart = (void (*)(char *))txx9_machine_halt;
+	_machine_halt = txx9_machine_halt;
+	pm_power_off = txx9_machine_halt;
+
+#ifdef CONFIG_PCI
+	pcibios_plat_setup = txx9_pcibios_setup;
+#endif
+	txx9_board_vec->mem_setup();
+}
+
+void __init arch_init_irq(void)
+{
+	txx9_board_vec->irq_setup();
+}
+
+void __init plat_time_init(void)
+{
+	txx9_board_vec->time_init();
+}
+
+static int __init _txx9_arch_init(void)
+{
+	if (txx9_board_vec->arch_init)
+		txx9_board_vec->arch_init();
+	return 0;
+}
+arch_initcall(_txx9_arch_init);
+
+static int __init _txx9_device_init(void)
+{
+	if (txx9_board_vec->device_init)
+		txx9_board_vec->device_init();
+	return 0;
+}
+device_initcall(_txx9_device_init);
+
+int (*txx9_irq_dispatch)(int pending);
+asmlinkage void plat_irq_dispatch(void)
+{
+	int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+	int irq = txx9_irq_dispatch(pending);
+
+	if (likely(irq >= 0))
+		do_IRQ(irq);
+	else
+		spurious_interrupt();
+}
+
+/* see include/asm-mips/mach-tx39xx/mangle-port.h, for example. */
+#ifdef NEEDS_TXX9_SWIZZLE_ADDR_B
+static unsigned long __swizzle_addr_none(unsigned long port)
+{
+	return port;
+}
+unsigned long (*__swizzle_addr_b)(unsigned long port) = __swizzle_addr_none;
+EXPORT_SYMBOL(__swizzle_addr_b);
+#endif
diff --git a/arch/mips/txx9/generic/setup_tx3927.c b/arch/mips/txx9/generic/setup_tx3927.c
new file mode 100644
index 000000000000..7bd963d37fc3
--- /dev/null
+++ b/arch/mips/txx9/generic/setup_tx3927.c
@@ -0,0 +1,130 @@
+/*
+ * TX3927 setup routines
+ * Based on linux/arch/mips/txx9/jmr3927/setup.c
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/param.h>
+#include <linux/io.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx3927.h>
+
+void __init tx3927_wdt_init(void)
+{
+	txx9_wdt_init(TX3927_TMR_REG(2));
+}
+
+void __init tx3927_setup(void)
+{
+	int i;
+	unsigned int conf;
+
+	/* don't enable - see errata */
+	txx9_ccfg_toeon = 0;
+	if (strstr(prom_getcmdline(), "toeon") != NULL)
+		txx9_ccfg_toeon = 1;
+
+	txx9_reg_res_init(TX3927_REV_PCODE(), TX3927_REG_BASE,
+			  TX3927_REG_SIZE);
+
+	/* SDRAMC,ROMC are configured by PROM */
+	for (i = 0; i < 8; i++) {
+		if (!(tx3927_romcptr->cr[i] & 0x8))
+			continue;	/* disabled */
+		txx9_ce_res[i].start = (unsigned long)TX3927_ROMC_BA(i);
+		txx9_ce_res[i].end =
+			txx9_ce_res[i].start + TX3927_ROMC_SIZE(i) - 1;
+		request_resource(&iomem_resource, &txx9_ce_res[i]);
+	}
+
+	/* clocks */
+	txx9_gbus_clock = txx9_cpu_clock / 2;
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	/* CCFG */
+	/* enable Timeout BusError */
+	if (txx9_ccfg_toeon)
+		tx3927_ccfgptr->ccfg |= TX3927_CCFG_TOE;
+
+	/* clear BusErrorOnWrite flag */
+	tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_BEOW;
+	if (read_c0_conf() & TX39_CONF_WBON)
+		/* Disable PCI snoop */
+		tx3927_ccfgptr->ccfg &= ~TX3927_CCFG_PSNP;
+	else
+		/* Enable PCI SNOOP - with write through only */
+		tx3927_ccfgptr->ccfg |= TX3927_CCFG_PSNP;
+	/* do reset on watchdog */
+	tx3927_ccfgptr->ccfg |= TX3927_CCFG_WR;
+
+	printk(KERN_INFO "TX3927 -- CRIR:%08lx CCFG:%08lx PCFG:%08lx\n",
+	       tx3927_ccfgptr->crir,
+	       tx3927_ccfgptr->ccfg, tx3927_ccfgptr->pcfg);
+
+	/* TMR */
+	for (i = 0; i < TX3927_NR_TMR; i++)
+		txx9_tmr_init(TX3927_TMR_REG(i));
+
+	/* DMA */
+	tx3927_dmaptr->mcr = 0;
+	for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
+		/* reset channel */
+		tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
+		tx3927_dmaptr->ch[i].ccr = 0;
+	}
+	/* enable DMA */
+#ifdef __BIG_ENDIAN
+	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN;
+#else
+	tx3927_dmaptr->mcr = TX3927_DMA_MCR_MSTEN | TX3927_DMA_MCR_LE;
+#endif
+
+	/* PIO */
+	__raw_writel(0, &tx3927_pioptr->maskcpu);
+	__raw_writel(0, &tx3927_pioptr->maskext);
+	txx9_gpio_init(TX3927_PIO_REG, 0, 16);
+
+	conf = read_c0_conf();
+	if (!(conf & TX39_CONF_ICE))
+		printk(KERN_INFO "TX3927 I-Cache disabled.\n");
+	if (!(conf & TX39_CONF_DCE))
+		printk(KERN_INFO "TX3927 D-Cache disabled.\n");
+	else if (!(conf & TX39_CONF_WBON))
+		printk(KERN_INFO "TX3927 D-Cache WriteThrough.\n");
+	else if (!(conf & TX39_CONF_CWFON))
+		printk(KERN_INFO "TX3927 D-Cache WriteBack.\n");
+	else
+		printk(KERN_INFO "TX3927 D-Cache WriteBack (CWF) .\n");
+}
+
+void __init tx3927_time_init(unsigned int evt_tmrnr, unsigned int src_tmrnr)
+{
+	txx9_clockevent_init(TX3927_TMR_REG(evt_tmrnr),
+			     TXX9_IRQ_BASE + TX3927_IR_TMR(evt_tmrnr),
+			     TXX9_IMCLK);
+	txx9_clocksource_init(TX3927_TMR_REG(src_tmrnr), TXX9_IMCLK);
+}
+
+void __init tx3927_sio_init(unsigned int sclk, unsigned int cts_mask)
+{
+	int i;
+
+	for (i = 0; i < 2; i++)
+		txx9_sio_init(TX3927_SIO_REG(i),
+			      TXX9_IRQ_BASE + TX3927_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
+}
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
new file mode 100644
index 000000000000..f80d4b7a694d
--- /dev/null
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -0,0 +1,188 @@
+/*
+ * TX4927 setup routines
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * 2003-2005 (c) MontaVista Software, Inc.
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/param.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4927.h>
+
+static void __init tx4927_wdr_init(void)
+{
+	/* clear WatchDogReset (W1C) */
+	tx4927_ccfg_set(TX4927_CCFG_WDRST);
+	/* do reset on watchdog */
+	tx4927_ccfg_set(TX4927_CCFG_WR);
+}
+
+void __init tx4927_wdt_init(void)
+{
+	txx9_wdt_init(TX4927_TMR_REG(2) & 0xfffffffffULL);
+}
+
+static struct resource tx4927_sdram_resource[4];
+
+void __init tx4927_setup(void)
+{
+	int i;
+	__u32 divmode;
+	int cpuclk = 0;
+	u64 ccfg;
+
+	txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE,
+			  TX4927_REG_SIZE);
+
+	/* SDRAMC,EBUSC are configured by PROM */
+	for (i = 0; i < 8; i++) {
+		if (!(TX4927_EBUSC_CR(i) & 0x8))
+			continue;	/* disabled */
+		txx9_ce_res[i].start = (unsigned long)TX4927_EBUSC_BA(i);
+		txx9_ce_res[i].end =
+			txx9_ce_res[i].start + TX4927_EBUSC_SIZE(i) - 1;
+		request_resource(&iomem_resource, &txx9_ce_res[i]);
+	}
+
+	/* clocks */
+	ccfg = ____raw_readq(&tx4927_ccfgptr->ccfg);
+	if (txx9_master_clock) {
+		/* calculate gbus_clock and cpu_clock from master_clock */
+		divmode = (__u32)ccfg & TX4927_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4927_CCFG_DIVMODE_8:
+		case TX4927_CCFG_DIVMODE_10:
+		case TX4927_CCFG_DIVMODE_12:
+		case TX4927_CCFG_DIVMODE_16:
+			txx9_gbus_clock = txx9_master_clock * 4; break;
+		default:
+			txx9_gbus_clock = txx9_master_clock;
+		}
+		switch (divmode) {
+		case TX4927_CCFG_DIVMODE_2:
+		case TX4927_CCFG_DIVMODE_8:
+			cpuclk = txx9_gbus_clock * 2; break;
+		case TX4927_CCFG_DIVMODE_2_5:
+		case TX4927_CCFG_DIVMODE_10:
+			cpuclk = txx9_gbus_clock * 5 / 2; break;
+		case TX4927_CCFG_DIVMODE_3:
+		case TX4927_CCFG_DIVMODE_12:
+			cpuclk = txx9_gbus_clock * 3; break;
+		case TX4927_CCFG_DIVMODE_4:
+		case TX4927_CCFG_DIVMODE_16:
+			cpuclk = txx9_gbus_clock * 4; break;
+		}
+		txx9_cpu_clock = cpuclk;
+	} else {
+		if (txx9_cpu_clock == 0)
+			txx9_cpu_clock = 200000000;	/* 200MHz */
+		/* calculate gbus_clock and master_clock from cpu_clock */
+		cpuclk = txx9_cpu_clock;
+		divmode = (__u32)ccfg & TX4927_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4927_CCFG_DIVMODE_2:
+		case TX4927_CCFG_DIVMODE_8:
+			txx9_gbus_clock = cpuclk / 2; break;
+		case TX4927_CCFG_DIVMODE_2_5:
+		case TX4927_CCFG_DIVMODE_10:
+			txx9_gbus_clock = cpuclk * 2 / 5; break;
+		case TX4927_CCFG_DIVMODE_3:
+		case TX4927_CCFG_DIVMODE_12:
+			txx9_gbus_clock = cpuclk / 3; break;
+		case TX4927_CCFG_DIVMODE_4:
+		case TX4927_CCFG_DIVMODE_16:
+			txx9_gbus_clock = cpuclk / 4; break;
+		}
+		switch (divmode) {
+		case TX4927_CCFG_DIVMODE_8:
+		case TX4927_CCFG_DIVMODE_10:
+		case TX4927_CCFG_DIVMODE_12:
+		case TX4927_CCFG_DIVMODE_16:
+			txx9_master_clock = txx9_gbus_clock / 4; break;
+		default:
+			txx9_master_clock = txx9_gbus_clock;
+		}
+	}
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	/* CCFG */
+	tx4927_wdr_init();
+	/* clear BusErrorOnWrite flag (W1C) */
+	tx4927_ccfg_set(TX4927_CCFG_BEOW);
+	/* enable Timeout BusError */
+	if (txx9_ccfg_toeon)
+		tx4927_ccfg_set(TX4927_CCFG_TOE);
+
+	/* DMA selection */
+	txx9_clear64(&tx4927_ccfgptr->pcfg, TX4927_PCFG_DMASEL_ALL);
+
+	/* Use external clock for external arbiter */
+	if (!(____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCIARB))
+		txx9_clear64(&tx4927_ccfgptr->pcfg, TX4927_PCFG_PCICLKEN_ALL);
+
+	printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n",
+	       txx9_pcode_str,
+	       (cpuclk + 500000) / 1000000,
+	       (txx9_master_clock + 500000) / 1000000,
+	       (__u32)____raw_readq(&tx4927_ccfgptr->crir),
+	       (unsigned long long)____raw_readq(&tx4927_ccfgptr->ccfg),
+	       (unsigned long long)____raw_readq(&tx4927_ccfgptr->pcfg));
+
+	printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str);
+	for (i = 0; i < 4; i++) {
+		__u64 cr = TX4927_SDRAMC_CR(i);
+		unsigned long base, size;
+		if (!((__u32)cr & 0x00000400))
+			continue;	/* disabled */
+		base = (unsigned long)(cr >> 49) << 21;
+		size = (((unsigned long)(cr >> 33) & 0x7fff) + 1) << 21;
+		printk(" CR%d:%016llx", i, (unsigned long long)cr);
+		tx4927_sdram_resource[i].name = "SDRAM";
+		tx4927_sdram_resource[i].start = base;
+		tx4927_sdram_resource[i].end = base + size - 1;
+		tx4927_sdram_resource[i].flags = IORESOURCE_MEM;
+		request_resource(&iomem_resource, &tx4927_sdram_resource[i]);
+	}
+	printk(" TR:%09llx\n",
+	       (unsigned long long)____raw_readq(&tx4927_sdramcptr->tr));
+
+	/* TMR */
+	/* disable all timers */
+	for (i = 0; i < TX4927_NR_TMR; i++)
+		txx9_tmr_init(TX4927_TMR_REG(i) & 0xfffffffffULL);
+
+	/* PIO */
+	txx9_gpio_init(TX4927_PIO_REG & 0xfffffffffULL, 0, TX4927_NUM_PIO);
+	__raw_writel(0, &tx4927_pioptr->maskcpu);
+	__raw_writel(0, &tx4927_pioptr->maskext);
+}
+
+void __init tx4927_time_init(unsigned int tmrnr)
+{
+	if (____raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_TINTDIS)
+		txx9_clockevent_init(TX4927_TMR_REG(tmrnr) & 0xfffffffffULL,
+				     TXX9_IRQ_BASE + TX4927_IR_TMR(tmrnr),
+				     TXX9_IMCLK);
+}
+
+void __init tx4927_sio_init(unsigned int sclk, unsigned int cts_mask)
+{
+	int i;
+
+	for (i = 0; i < 2; i++)
+		txx9_sio_init(TX4927_SIO_REG(i) & 0xfffffffffULL,
+			      TXX9_IRQ_BASE + TX4927_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
+}
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
new file mode 100644
index 000000000000..f3040b9ba059
--- /dev/null
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -0,0 +1,270 @@
+/*
+ * TX4938/4937 setup routines
+ * Based on linux/arch/mips/txx9/rbtx4938/setup.c,
+ *	    and RBTX49xx patch from CELF patch archive.
+ *
+ * 2003-2005 (c) MontaVista Software, Inc.
+ * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/param.h>
+#include <asm/txx9irq.h>
+#include <asm/txx9tmr.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/tx4938.h>
+
+static void __init tx4938_wdr_init(void)
+{
+	/* clear WatchDogReset (W1C) */
+	tx4938_ccfg_set(TX4938_CCFG_WDRST);
+	/* do reset on watchdog */
+	tx4938_ccfg_set(TX4938_CCFG_WR);
+}
+
+void __init tx4938_wdt_init(void)
+{
+	txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL);
+}
+
+static struct resource tx4938_sdram_resource[4];
+static struct resource tx4938_sram_resource;
+
+#define TX4938_SRAM_SIZE 0x800
+
+void __init tx4938_setup(void)
+{
+	int i;
+	__u32 divmode;
+	int cpuclk = 0;
+	u64 ccfg;
+
+	txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE,
+			  TX4938_REG_SIZE);
+
+	/* SDRAMC,EBUSC are configured by PROM */
+	for (i = 0; i < 8; i++) {
+		if (!(TX4938_EBUSC_CR(i) & 0x8))
+			continue;	/* disabled */
+		txx9_ce_res[i].start = (unsigned long)TX4938_EBUSC_BA(i);
+		txx9_ce_res[i].end =
+			txx9_ce_res[i].start + TX4938_EBUSC_SIZE(i) - 1;
+		request_resource(&iomem_resource, &txx9_ce_res[i]);
+	}
+
+	/* clocks */
+	ccfg = ____raw_readq(&tx4938_ccfgptr->ccfg);
+	if (txx9_master_clock) {
+		/* calculate gbus_clock and cpu_clock from master_clock */
+		divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_8:
+		case TX4938_CCFG_DIVMODE_10:
+		case TX4938_CCFG_DIVMODE_12:
+		case TX4938_CCFG_DIVMODE_16:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_gbus_clock = txx9_master_clock * 4; break;
+		default:
+			txx9_gbus_clock = txx9_master_clock;
+		}
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_2:
+		case TX4938_CCFG_DIVMODE_8:
+			cpuclk = txx9_gbus_clock * 2; break;
+		case TX4938_CCFG_DIVMODE_2_5:
+		case TX4938_CCFG_DIVMODE_10:
+			cpuclk = txx9_gbus_clock * 5 / 2; break;
+		case TX4938_CCFG_DIVMODE_3:
+		case TX4938_CCFG_DIVMODE_12:
+			cpuclk = txx9_gbus_clock * 3; break;
+		case TX4938_CCFG_DIVMODE_4:
+		case TX4938_CCFG_DIVMODE_16:
+			cpuclk = txx9_gbus_clock * 4; break;
+		case TX4938_CCFG_DIVMODE_4_5:
+		case TX4938_CCFG_DIVMODE_18:
+			cpuclk = txx9_gbus_clock * 9 / 2; break;
+		}
+		txx9_cpu_clock = cpuclk;
+	} else {
+		if (txx9_cpu_clock == 0)
+			txx9_cpu_clock = 300000000;	/* 300MHz */
+		/* calculate gbus_clock and master_clock from cpu_clock */
+		cpuclk = txx9_cpu_clock;
+		divmode = (__u32)ccfg & TX4938_CCFG_DIVMODE_MASK;
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_2:
+		case TX4938_CCFG_DIVMODE_8:
+			txx9_gbus_clock = cpuclk / 2; break;
+		case TX4938_CCFG_DIVMODE_2_5:
+		case TX4938_CCFG_DIVMODE_10:
+			txx9_gbus_clock = cpuclk * 2 / 5; break;
+		case TX4938_CCFG_DIVMODE_3:
+		case TX4938_CCFG_DIVMODE_12:
+			txx9_gbus_clock = cpuclk / 3; break;
+		case TX4938_CCFG_DIVMODE_4:
+		case TX4938_CCFG_DIVMODE_16:
+			txx9_gbus_clock = cpuclk / 4; break;
+		case TX4938_CCFG_DIVMODE_4_5:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_gbus_clock = cpuclk * 2 / 9; break;
+		}
+		switch (divmode) {
+		case TX4938_CCFG_DIVMODE_8:
+		case TX4938_CCFG_DIVMODE_10:
+		case TX4938_CCFG_DIVMODE_12:
+		case TX4938_CCFG_DIVMODE_16:
+		case TX4938_CCFG_DIVMODE_18:
+			txx9_master_clock = txx9_gbus_clock / 4; break;
+		default:
+			txx9_master_clock = txx9_gbus_clock;
+		}
+	}
+	/* change default value to udelay/mdelay take reasonable time */
+	loops_per_jiffy = txx9_cpu_clock / HZ / 2;
+
+	/* CCFG */
+	tx4938_wdr_init();
+	/* clear BusErrorOnWrite flag (W1C) */
+	tx4938_ccfg_set(TX4938_CCFG_BEOW);
+	/* enable Timeout BusError */
+	if (txx9_ccfg_toeon)
+		tx4938_ccfg_set(TX4938_CCFG_TOE);
+
+	/* DMA selection */
+	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_DMASEL_ALL);
+
+	/* Use external clock for external arbiter */
+	if (!(____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB))
+		txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_PCICLKEN_ALL);
+
+	printk(KERN_INFO "%s -- %dMHz(M%dMHz) CRIR:%08x CCFG:%llx PCFG:%llx\n",
+	       txx9_pcode_str,
+	       (cpuclk + 500000) / 1000000,
+	       (txx9_master_clock + 500000) / 1000000,
+	       (__u32)____raw_readq(&tx4938_ccfgptr->crir),
+	       (unsigned long long)____raw_readq(&tx4938_ccfgptr->ccfg),
+	       (unsigned long long)____raw_readq(&tx4938_ccfgptr->pcfg));
+
+	printk(KERN_INFO "%s SDRAMC --", txx9_pcode_str);
+	for (i = 0; i < 4; i++) {
+		__u64 cr = TX4938_SDRAMC_CR(i);
+		unsigned long base, size;
+		if (!((__u32)cr & 0x00000400))
+			continue;	/* disabled */
+		base = (unsigned long)(cr >> 49) << 21;
+		size = (((unsigned long)(cr >> 33) & 0x7fff) + 1) << 21;
+		printk(" CR%d:%016llx", i, (unsigned long long)cr);
+		tx4938_sdram_resource[i].name = "SDRAM";
+		tx4938_sdram_resource[i].start = base;
+		tx4938_sdram_resource[i].end = base + size - 1;
+		tx4938_sdram_resource[i].flags = IORESOURCE_MEM;
+		request_resource(&iomem_resource, &tx4938_sdram_resource[i]);
+	}
+	printk(" TR:%09llx\n",
+	       (unsigned long long)____raw_readq(&tx4938_sdramcptr->tr));
+
+	/* SRAM */
+	if (txx9_pcode == 0x4938 && ____raw_readq(&tx4938_sramcptr->cr) & 1) {
+		unsigned int size = TX4938_SRAM_SIZE;
+		tx4938_sram_resource.name = "SRAM";
+		tx4938_sram_resource.start =
+			(____raw_readq(&tx4938_sramcptr->cr) >> (39-11))
+			& ~(size - 1);
+		tx4938_sram_resource.end =
+			tx4938_sram_resource.start + TX4938_SRAM_SIZE - 1;
+		tx4938_sram_resource.flags = IORESOURCE_MEM;
+		request_resource(&iomem_resource, &tx4938_sram_resource);
+	}
+
+	/* TMR */
+	/* disable all timers */
+	for (i = 0; i < TX4938_NR_TMR; i++)
+		txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL);
+
+	/* DMA */
+	for (i = 0; i < 2; i++)
+		____raw_writeq(TX4938_DMA_MCR_MSTEN,
+			       (void __iomem *)(TX4938_DMA_REG(i) + 0x50));
+
+	/* PIO */
+	txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, TX4938_NUM_PIO);
+	__raw_writel(0, &tx4938_pioptr->maskcpu);
+	__raw_writel(0, &tx4938_pioptr->maskext);
+
+	if (txx9_pcode == 0x4938) {
+		__u64 pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);
+		/* set PCIC1 reset */
+		txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
+		if (pcfg & (TX4938_PCFG_ETH0_SEL | TX4938_PCFG_ETH1_SEL)) {
+			mdelay(1);	/* at least 128 cpu clock */
+			/* clear PCIC1 reset */
+			txx9_clear64(&tx4938_ccfgptr->clkctr,
+				     TX4938_CLKCTR_PCIC1RST);
+		} else {
+			printk(KERN_INFO "%s: stop PCIC1\n", txx9_pcode_str);
+			/* stop PCIC1 */
+			txx9_set64(&tx4938_ccfgptr->clkctr,
+				   TX4938_CLKCTR_PCIC1CKD);
+		}
+		if (!(pcfg & TX4938_PCFG_ETH0_SEL)) {
+			printk(KERN_INFO "%s: stop ETH0\n", txx9_pcode_str);
+			txx9_set64(&tx4938_ccfgptr->clkctr,
+				   TX4938_CLKCTR_ETH0RST);
+			txx9_set64(&tx4938_ccfgptr->clkctr,
+				   TX4938_CLKCTR_ETH0CKD);
+		}
+		if (!(pcfg & TX4938_PCFG_ETH1_SEL)) {
+			printk(KERN_INFO "%s: stop ETH1\n", txx9_pcode_str);
+			txx9_set64(&tx4938_ccfgptr->clkctr,
+				   TX4938_CLKCTR_ETH1RST);
+			txx9_set64(&tx4938_ccfgptr->clkctr,
+				   TX4938_CLKCTR_ETH1CKD);
+		}
+	}
+}
+
+void __init tx4938_time_init(unsigned int tmrnr)
+{
+	if (____raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_TINTDIS)
+		txx9_clockevent_init(TX4938_TMR_REG(tmrnr) & 0xfffffffffULL,
+				     TXX9_IRQ_BASE + TX4938_IR_TMR(tmrnr),
+				     TXX9_IMCLK);
+}
+
+void __init tx4938_sio_init(unsigned int sclk, unsigned int cts_mask)
+{
+	int i;
+	unsigned int ch_mask = 0;
+
+	if (__raw_readq(&tx4938_ccfgptr->pcfg) & TX4938_PCFG_ETH0_SEL)
+		ch_mask |= 1 << 1; /* disable SIO1 by PCFG setting */
+	for (i = 0; i < 2; i++) {
+		if ((1 << i) & ch_mask)
+			continue;
+		txx9_sio_init(TX4938_SIO_REG(i) & 0xfffffffffULL,
+			      TXX9_IRQ_BASE + TX4938_IR_SIO(i),
+			      i, sclk, (1 << i) & cts_mask);
+	}
+}
+
+void __init tx4938_spi_init(int busid)
+{
+	txx9_spi_init(busid, TX4938_SPI_REG & 0xfffffffffULL,
+		      TXX9_IRQ_BASE + TX4938_IR_SPI);
+}
+
+void __init tx4938_ethaddr_init(unsigned char *addr0, unsigned char *addr1)
+{
+	u64 pcfg = __raw_readq(&tx4938_ccfgptr->pcfg);
+
+	if (addr0 && (pcfg & TX4938_PCFG_ETH0_SEL))
+		txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH0, addr0);
+	if (addr1 && (pcfg & TX4938_PCFG_ETH1_SEL))
+		txx9_ethaddr_init(TXX9_IRQ_BASE + TX4938_IR_ETH1, addr1);
+}
diff --git a/arch/mips/txx9/generic/smsc_fdc37m81x.c b/arch/mips/txx9/generic/smsc_fdc37m81x.c
new file mode 100644
index 000000000000..a2b2d62d88e3
--- /dev/null
+++ b/arch/mips/txx9/generic/smsc_fdc37m81x.c
@@ -0,0 +1,172 @@
+/*
+ * Interface for smsc fdc48m81x Super IO chip
+ *
+ * Author: MontaVista Software, Inc. source@mvista.com
+ *
+ * 2001-2003 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Copyright 2004 (c) MontaVista Software, Inc.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <asm/txx9/smsc_fdc37m81x.h>
+
+/* Common Registers */
+#define SMSC_FDC37M81X_CONFIG_INDEX  0x00
+#define SMSC_FDC37M81X_CONFIG_DATA   0x01
+#define SMSC_FDC37M81X_CONF          0x02
+#define SMSC_FDC37M81X_INDEX         0x03
+#define SMSC_FDC37M81X_DNUM          0x07
+#define SMSC_FDC37M81X_DID           0x20
+#define SMSC_FDC37M81X_DREV          0x21
+#define SMSC_FDC37M81X_PCNT          0x22
+#define SMSC_FDC37M81X_PMGT          0x23
+#define SMSC_FDC37M81X_OSC           0x24
+#define SMSC_FDC37M81X_CONFPA0       0x26
+#define SMSC_FDC37M81X_CONFPA1       0x27
+#define SMSC_FDC37M81X_TEST4         0x2B
+#define SMSC_FDC37M81X_TEST5         0x2C
+#define SMSC_FDC37M81X_TEST1         0x2D
+#define SMSC_FDC37M81X_TEST2         0x2E
+#define SMSC_FDC37M81X_TEST3         0x2F
+
+/* Logical device numbers */
+#define SMSC_FDC37M81X_FDD           0x00
+#define SMSC_FDC37M81X_SERIAL1       0x04
+#define SMSC_FDC37M81X_SERIAL2       0x05
+#define SMSC_FDC37M81X_KBD           0x07
+
+/* Logical device Config Registers */
+#define SMSC_FDC37M81X_ACTIVE        0x30
+#define SMSC_FDC37M81X_BASEADDR0     0x60
+#define SMSC_FDC37M81X_BASEADDR1     0x61
+#define SMSC_FDC37M81X_INT           0x70
+#define SMSC_FDC37M81X_INT2          0x72
+#define SMSC_FDC37M81X_MODE          0xF0
+
+/* Chip Config Values */
+#define SMSC_FDC37M81X_CONFIG_ENTER  0x55
+#define SMSC_FDC37M81X_CONFIG_EXIT   0xaa
+#define SMSC_FDC37M81X_CHIP_ID       0x4d
+
+static unsigned long g_smsc_fdc37m81x_base;
+
+static inline unsigned char smsc_fdc37m81x_rd(unsigned char index)
+{
+	outb(index, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX);
+
+	return inb(g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_DATA);
+}
+
+static inline void smsc_dc37m81x_wr(unsigned char index, unsigned char data)
+{
+	outb(index, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX);
+	outb(data, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_DATA);
+}
+
+void smsc_fdc37m81x_config_beg(void)
+{
+	if (g_smsc_fdc37m81x_base) {
+		outb(SMSC_FDC37M81X_CONFIG_ENTER,
+		     g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX);
+	}
+}
+
+void smsc_fdc37m81x_config_end(void)
+{
+	if (g_smsc_fdc37m81x_base)
+		outb(SMSC_FDC37M81X_CONFIG_EXIT,
+		     g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX);
+}
+
+u8 smsc_fdc37m81x_config_get(u8 reg)
+{
+	u8 val = 0;
+
+	if (g_smsc_fdc37m81x_base)
+		val = smsc_fdc37m81x_rd(reg);
+
+	return val;
+}
+
+void smsc_fdc37m81x_config_set(u8 reg, u8 val)
+{
+	if (g_smsc_fdc37m81x_base)
+		smsc_dc37m81x_wr(reg, val);
+}
+
+unsigned long __init smsc_fdc37m81x_init(unsigned long port)
+{
+	const int field = sizeof(unsigned long) * 2;
+	u8 chip_id;
+
+	if (g_smsc_fdc37m81x_base)
+		printk(KERN_WARNING "%s: stepping on old base=0x%0*lx\n",
+		       __func__,
+		       field, g_smsc_fdc37m81x_base);
+
+	g_smsc_fdc37m81x_base = port;
+
+	smsc_fdc37m81x_config_beg();
+
+	chip_id = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DID);
+	if (chip_id == SMSC_FDC37M81X_CHIP_ID)
+		smsc_fdc37m81x_config_end();
+	else {
+		printk(KERN_WARNING "%s: unknow chip id 0x%02x\n", __func__,
+		       chip_id);
+		g_smsc_fdc37m81x_base = 0;
+	}
+
+	return g_smsc_fdc37m81x_base;
+}
+
+#ifdef DEBUG
+static void smsc_fdc37m81x_config_dump_one(const char *key, u8 dev, u8 reg)
+{
+	printk(KERN_INFO "%s: dev=0x%02x reg=0x%02x val=0x%02x\n",
+	       key, dev, reg,
+	       smsc_fdc37m81x_rd(reg));
+}
+
+void smsc_fdc37m81x_config_dump(void)
+{
+	u8 orig;
+	const char *fname = __func__;
+
+	smsc_fdc37m81x_config_beg();
+
+	orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM);
+
+	printk(KERN_INFO "%s: common\n", fname);
+	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
+				       SMSC_FDC37M81X_DNUM);
+	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
+				       SMSC_FDC37M81X_DID);
+	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
+				       SMSC_FDC37M81X_DREV);
+	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
+				       SMSC_FDC37M81X_PCNT);
+	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE,
+				       SMSC_FDC37M81X_PMGT);
+
+	printk(KERN_INFO "%s: keyboard\n", fname);
+	smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD);
+	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
+				       SMSC_FDC37M81X_ACTIVE);
+	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
+				       SMSC_FDC37M81X_INT);
+	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
+				       SMSC_FDC37M81X_INT2);
+	smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD,
+				       SMSC_FDC37M81X_LDCR_F0);
+
+	smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, orig);
+
+	smsc_fdc37m81x_config_end();
+}
+#endif
diff --git a/arch/mips/txx9/jmr3927/Makefile b/arch/mips/txx9/jmr3927/Makefile
new file mode 100644
index 000000000000..20d61ac543e5
--- /dev/null
+++ b/arch/mips/txx9/jmr3927/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for TOSHIBA JMR-TX3927 board
+#
+
+obj-y	+= prom.o irq.o setup.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/jmr3927/irq.c b/arch/mips/txx9/jmr3927/irq.c
new file mode 100644
index 000000000000..6ec626c9473f
--- /dev/null
+++ b/arch/mips/txx9/jmr3927/irq.c
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *              ahennessy@mvista.com
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/jmr3927.h>
+
+#if JMR3927_IRQ_END > NR_IRQS
+#error JMR3927_IRQ_END > NR_IRQS
+#endif
+
+/*
+ * CP0_STATUS is a thread's resource (saved/restored on context switch).
+ * So disable_irq/enable_irq MUST handle IOC/IRC registers.
+ */
+static void mask_irq_ioc(unsigned int irq)
+{
+	/* 0: mask */
+	unsigned int irq_nr = irq - JMR3927_IRQ_IOC;
+	unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR);
+	unsigned int bit = 1 << irq_nr;
+	jmr3927_ioc_reg_out(imask & ~bit, JMR3927_IOC_INTM_ADDR);
+	/* flush write buffer */
+	(void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
+}
+static void unmask_irq_ioc(unsigned int irq)
+{
+	/* 0: mask */
+	unsigned int irq_nr = irq - JMR3927_IRQ_IOC;
+	unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR);
+	unsigned int bit = 1 << irq_nr;
+	jmr3927_ioc_reg_out(imask | bit, JMR3927_IOC_INTM_ADDR);
+	/* flush write buffer */
+	(void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR);
+}
+
+static int jmr3927_ioc_irqroute(void)
+{
+	unsigned char istat = jmr3927_ioc_reg_in(JMR3927_IOC_INTS2_ADDR);
+	int i;
+
+	for (i = 0; i < JMR3927_NR_IRQ_IOC; i++) {
+		if (istat & (1 << i))
+			return JMR3927_IRQ_IOC + i;
+	}
+	return -1;
+}
+
+static int jmr3927_irq_dispatch(int pending)
+{
+	int irq;
+
+	if ((pending & CAUSEF_IP7) == 0)
+		return -1;
+	irq = (pending >> CAUSEB_IP2) & 0x0f;
+	irq += JMR3927_IRQ_IRC;
+	if (irq == JMR3927_IRQ_IOCINT)
+		irq = jmr3927_ioc_irqroute();
+	return irq;
+}
+
+static struct irq_chip jmr3927_irq_ioc = {
+	.name = "jmr3927_ioc",
+	.ack = mask_irq_ioc,
+	.mask = mask_irq_ioc,
+	.mask_ack = mask_irq_ioc,
+	.unmask = unmask_irq_ioc,
+};
+
+void __init jmr3927_irq_setup(void)
+{
+	int i;
+
+	txx9_irq_dispatch = jmr3927_irq_dispatch;
+	/* Now, interrupt control disabled, */
+	/* all IRC interrupts are masked, */
+	/* all IRC interrupt mode are Low Active. */
+
+	/* mask all IOC interrupts */
+	jmr3927_ioc_reg_out(0, JMR3927_IOC_INTM_ADDR);
+	/* setup IOC interrupt mode (SOFT:High Active, Others:Low Active) */
+	jmr3927_ioc_reg_out(JMR3927_IOC_INTF_SOFT, JMR3927_IOC_INTP_ADDR);
+
+	/* clear PCI Soft interrupts */
+	jmr3927_ioc_reg_out(0, JMR3927_IOC_INTS1_ADDR);
+	/* clear PCI Reset interrupts */
+	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
+
+	tx3927_irq_init();
+	for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++)
+		set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq);
+
+	/* setup IOC interrupt 1 (PCI, MODEM) */
+	set_irq_chained_handler(JMR3927_IRQ_IOCINT, handle_simple_irq);
+}
diff --git a/arch/mips/txx9/jmr3927/prom.c b/arch/mips/txx9/jmr3927/prom.c
new file mode 100644
index 000000000000..70c4c8ec3e84
--- /dev/null
+++ b/arch/mips/txx9/jmr3927/prom.c
@@ -0,0 +1,53 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ *    PROM library initialisation code, assuming a version of
+ *    pmon is the boot code.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *              ahennessy@mvista.com
+ *
+ * Based on arch/mips/au1000/common/prom.c
+ *
+ * This file was derived from Carsten Langgaard's
+ * arch/mips/mips-boards/xx files.
+ *
+ * Carsten Langgaard, carstenl@mips.com
+ * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/bootinfo.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/jmr3927.h>
+
+void __init jmr3927_prom_init(void)
+{
+	/* CCFG */
+	if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0)
+		printk(KERN_ERR "TX3927 TLB off\n");
+
+	prom_init_cmdline();
+	add_memory_region(0, JMR3927_SDRAM_SIZE, BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX3927_SIO_REG(1));
+}
diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c
new file mode 100644
index 000000000000..87db41be8a56
--- /dev/null
+++ b/arch/mips/txx9/jmr3927/setup.c
@@ -0,0 +1,219 @@
+/*
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *              ahennessy@mvista.com
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/reboot.h>
+#include <asm/txx9pio.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/jmr3927.h>
+#include <asm/mipsregs.h>
+
+static void jmr3927_machine_restart(char *command)
+{
+	local_irq_disable();
+#if 1	/* Resetting PCI bus */
+	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
+	jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI, JMR3927_IOC_RESET_ADDR);
+	(void)jmr3927_ioc_reg_in(JMR3927_IOC_RESET_ADDR);	/* flush WB */
+	mdelay(1);
+	jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
+#endif
+	jmr3927_ioc_reg_out(JMR3927_IOC_RESET_CPU, JMR3927_IOC_RESET_ADDR);
+	/* fallback */
+	(*_machine_halt)();
+}
+
+static void __init jmr3927_time_init(void)
+{
+	tx3927_time_init(0, 1);
+}
+
+#define DO_WRITE_THROUGH
+#define DO_ENABLE_CACHE
+
+static void jmr3927_board_init(void);
+
+static void __init jmr3927_mem_setup(void)
+{
+	char *argptr;
+
+	set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO);
+
+	_machine_restart = jmr3927_machine_restart;
+
+	/* cache setup */
+	{
+		unsigned int conf;
+#ifdef DO_ENABLE_CACHE
+		int mips_ic_disable = 0, mips_dc_disable = 0;
+#else
+		int mips_ic_disable = 1, mips_dc_disable = 1;
+#endif
+#ifdef DO_WRITE_THROUGH
+		int mips_config_cwfon = 0;
+		int mips_config_wbon = 0;
+#else
+		int mips_config_cwfon = 1;
+		int mips_config_wbon = 1;
+#endif
+
+		conf = read_c0_conf();
+		conf &= ~(TX39_CONF_ICE | TX39_CONF_DCE |
+			  TX39_CONF_WBON | TX39_CONF_CWFON);
+		conf |= mips_ic_disable ? 0 : TX39_CONF_ICE;
+		conf |= mips_dc_disable ? 0 : TX39_CONF_DCE;
+		conf |= mips_config_wbon ? TX39_CONF_WBON : 0;
+		conf |= mips_config_cwfon ? TX39_CONF_CWFON : 0;
+
+		write_c0_conf(conf);
+		write_c0_cache(0);
+	}
+
+	/* initialize board */
+	jmr3927_board_init();
+
+	tx3927_sio_init(0, 1 << 1); /* ch1: noCTS */
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+	argptr = prom_getcmdline();
+	if (!strstr(argptr, "console="))
+		strcat(argptr, " console=ttyS1,115200");
+#endif
+}
+
+static void __init jmr3927_pci_setup(void)
+{
+#ifdef CONFIG_PCI
+	int extarb = !(tx3927_ccfgptr->ccfg & TX3927_CCFG_PCIXARB);
+	struct pci_controller *c;
+
+	c = txx9_alloc_pci_controller(&txx9_primary_pcic,
+				      JMR3927_PCIMEM, JMR3927_PCIMEM_SIZE,
+				      JMR3927_PCIIO, JMR3927_PCIIO_SIZE);
+	register_pci_controller(c);
+	if (!extarb) {
+		/* Reset PCI Bus */
+		jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
+		udelay(100);
+		jmr3927_ioc_reg_out(JMR3927_IOC_RESET_PCI,
+				    JMR3927_IOC_RESET_ADDR);
+		udelay(100);
+		jmr3927_ioc_reg_out(0, JMR3927_IOC_RESET_ADDR);
+	}
+	tx3927_pcic_setup(c, JMR3927_SDRAM_SIZE, extarb);
+	tx3927_setup_pcierr_irq();
+#endif /* CONFIG_PCI */
+}
+
+static void __init jmr3927_board_init(void)
+{
+	txx9_cpu_clock = JMR3927_CORECLK;
+	/* SDRAMC are configured by PROM */
+
+	/* ROMC */
+	tx3927_romcptr->cr[1] = JMR3927_ROMCE1 | 0x00030048;
+	tx3927_romcptr->cr[2] = JMR3927_ROMCE2 | 0x000064c8;
+	tx3927_romcptr->cr[3] = JMR3927_ROMCE3 | 0x0003f698;
+	tx3927_romcptr->cr[5] = JMR3927_ROMCE5 | 0x0000f218;
+
+	/* Pin selection */
+	tx3927_ccfgptr->pcfg &= ~TX3927_PCFG_SELALL;
+	tx3927_ccfgptr->pcfg |=
+		TX3927_PCFG_SELSIOC(0) | TX3927_PCFG_SELSIO_ALL |
+		(TX3927_PCFG_SELDMA_ALL & ~TX3927_PCFG_SELDMA(1));
+
+	tx3927_setup();
+
+	/* PIO[15:12] connected to LEDs */
+	__raw_writel(0x0000f000, &tx3927_pioptr->dir);
+	gpio_request(11, "dipsw1");
+	gpio_request(10, "dipsw2");
+
+	jmr3927_pci_setup();
+
+	/* SIO0 DTR on */
+	jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR);
+
+	jmr3927_led_set(0);
+
+	printk(KERN_INFO
+	       "JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n",
+	       jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK,
+	       jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK,
+	       jmr3927_dipsw1(), jmr3927_dipsw2(),
+	       jmr3927_dipsw3(), jmr3927_dipsw4());
+}
+
+/* This trick makes rtc-ds1742 driver usable as is. */
+static unsigned long jmr3927_swizzle_addr_b(unsigned long port)
+{
+	if ((port & 0xffff0000) != JMR3927_IOC_NVRAMB_ADDR)
+		return port;
+	port = (port & 0xffff0000) | (port & 0x7fff << 1);
+#ifdef __BIG_ENDIAN
+	return port;
+#else
+	return port | 1;
+#endif
+}
+
+static void __init jmr3927_rtc_init(void)
+{
+	static struct resource __initdata res = {
+		.start	= JMR3927_IOC_NVRAMB_ADDR - IO_BASE,
+		.end	= JMR3927_IOC_NVRAMB_ADDR - IO_BASE + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	platform_device_register_simple("rtc-ds1742", -1, &res, 1);
+}
+
+static void __init jmr3927_device_init(void)
+{
+	__swizzle_addr_b = jmr3927_swizzle_addr_b;
+	jmr3927_rtc_init();
+	tx3927_wdt_init();
+}
+
+struct txx9_board_vec jmr3927_vec __initdata = {
+	.system = "Toshiba JMR_TX3927",
+	.prom_init = jmr3927_prom_init,
+	.mem_setup = jmr3927_mem_setup,
+	.irq_setup = jmr3927_irq_setup,
+	.time_init = jmr3927_time_init,
+	.device_init = jmr3927_device_init,
+#ifdef CONFIG_PCI
+	.pci_map_irq = jmr3927_pci_map_irq,
+#endif
+};
diff --git a/arch/mips/txx9/rbtx4927/Makefile b/arch/mips/txx9/rbtx4927/Makefile
new file mode 100644
index 000000000000..f3e1f597b4f1
--- /dev/null
+++ b/arch/mips/txx9/rbtx4927/Makefile
@@ -0,0 +1,3 @@
+obj-y	+= prom.o setup.o irq.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/rbtx4927/irq.c b/arch/mips/txx9/rbtx4927/irq.c
new file mode 100644
index 000000000000..00cd5231da30
--- /dev/null
+++ b/arch/mips/txx9/rbtx4927/irq.c
@@ -0,0 +1,198 @@
+/*
+ * Toshiba RBTX4927 specific interrupt handlers
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+/*
+ * I8259A_IRQ_BASE+00
+ * I8259A_IRQ_BASE+01 PS2/Keyboard
+ * I8259A_IRQ_BASE+02 Cascade RBTX4927-ISA (irqs 8-15)
+ * I8259A_IRQ_BASE+03
+ * I8259A_IRQ_BASE+04
+ * I8259A_IRQ_BASE+05
+ * I8259A_IRQ_BASE+06
+ * I8259A_IRQ_BASE+07
+ * I8259A_IRQ_BASE+08
+ * I8259A_IRQ_BASE+09
+ * I8259A_IRQ_BASE+10
+ * I8259A_IRQ_BASE+11
+ * I8259A_IRQ_BASE+12 PS2/Mouse (not supported at this time)
+ * I8259A_IRQ_BASE+13
+ * I8259A_IRQ_BASE+14 IDE
+ * I8259A_IRQ_BASE+15
+ *
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4927-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02
+ * TXX9_IRQ_BASE+03 Cascade RBTX4927-IOC
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 RBTX4927 RTL-8019AS ethernet
+ * TXX9_IRQ_BASE+06
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4927 SerialIO Channel 0
+ * TXX9_IRQ_BASE+09 TX4927 SerialIO Channel 1
+ * TXX9_IRQ_BASE+10
+ * TXX9_IRQ_BASE+11
+ * TXX9_IRQ_BASE+12
+ * TXX9_IRQ_BASE+13
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4927 PCI PCI-C
+ * TXX9_IRQ_BASE+17
+ * TXX9_IRQ_BASE+18
+ * TXX9_IRQ_BASE+19
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4927 PCI PCI-ERR
+ * TXX9_IRQ_BASE+23 TX4927 PCI PCI-PMA (not used)
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31
+ *
+ * RBTX4927_IRQ_IOC+00 FPCIB0 PCI-D (SouthBridge)
+ * RBTX4927_IRQ_IOC+01 FPCIB0 PCI-C (SouthBridge)
+ * RBTX4927_IRQ_IOC+02 FPCIB0 PCI-B (SouthBridge/IDE/pin=1,INTR)
+ * RBTX4927_IRQ_IOC+03 FPCIB0 PCI-A (SouthBridge/USB/pin=4)
+ * RBTX4927_IRQ_IOC+04
+ * RBTX4927_IRQ_IOC+05
+ * RBTX4927_IRQ_IOC+06
+ * RBTX4927_IRQ_IOC+07
+ *
+ * NOTES:
+ * SouthBridge/INTR is mapped to SouthBridge/A=PCI-B/#58
+ * SouthBridge/ISA/pin=0 no pci irq used by this device
+ * SouthBridge/IDE/pin=1 no pci irq used by this device, using INTR
+ * via ISA IRQ14
+ * SouthBridge/USB/pin=4 using pci irq SouthBridge/D=PCI-A=#59
+ * SouthBridge/PMC/pin=0 no pci irq used by this device
+ * SuperIO/PS2/Keyboard, using INTR via ISA IRQ1
+ * SuperIO/PS2/Mouse, using INTR via ISA IRQ12 (mouse not currently supported)
+ * JP7 is not bus master -- do NOT use -- only 4 pci bus master's
+ * allowed -- SouthBridge, JP4, JP5, JP6
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/rbtx4927.h>
+
+static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq);
+static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq);
+
+#define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC"
+static struct irq_chip toshiba_rbtx4927_irq_ioc_type = {
+	.name = TOSHIBA_RBTX4927_IOC_NAME,
+	.ack = toshiba_rbtx4927_irq_ioc_disable,
+	.mask = toshiba_rbtx4927_irq_ioc_disable,
+	.mask_ack = toshiba_rbtx4927_irq_ioc_disable,
+	.unmask = toshiba_rbtx4927_irq_ioc_enable,
+};
+
+static int toshiba_rbtx4927_irq_nested(int sw_irq)
+{
+	u8 level3;
+
+	level3 = readb(rbtx4927_imstat_addr) & 0x1f;
+	if (level3)
+		sw_irq = RBTX4927_IRQ_IOC + fls(level3) - 1;
+	return sw_irq;
+}
+
+static void __init toshiba_rbtx4927_irq_ioc_init(void)
+{
+	int i;
+
+	for (i = RBTX4927_IRQ_IOC;
+	     i < RBTX4927_IRQ_IOC + RBTX4927_NR_IRQ_IOC; i++)
+		set_irq_chip_and_handler(i, &toshiba_rbtx4927_irq_ioc_type,
+					 handle_level_irq);
+	set_irq_chained_handler(RBTX4927_IRQ_IOCINT, handle_simple_irq);
+}
+
+static void toshiba_rbtx4927_irq_ioc_enable(unsigned int irq)
+{
+	unsigned char v;
+
+	v = readb(rbtx4927_imask_addr);
+	v |= (1 << (irq - RBTX4927_IRQ_IOC));
+	writeb(v, rbtx4927_imask_addr);
+}
+
+static void toshiba_rbtx4927_irq_ioc_disable(unsigned int irq)
+{
+	unsigned char v;
+
+	v = readb(rbtx4927_imask_addr);
+	v &= ~(1 << (irq - RBTX4927_IRQ_IOC));
+	writeb(v, rbtx4927_imask_addr);
+	mmiowb();
+}
+
+
+static int rbtx4927_irq_dispatch(int pending)
+{
+	int irq;
+
+	if (pending & STATUSF_IP7)			/* cpu timer */
+		irq = MIPS_CPU_IRQ_BASE + 7;
+	else if (pending & STATUSF_IP2) {		/* tx4927 pic */
+		irq = txx9_irq();
+		if (irq == RBTX4927_IRQ_IOCINT)
+			irq = toshiba_rbtx4927_irq_nested(irq);
+	} else if (pending & STATUSF_IP0)		/* user line 0 */
+		irq = MIPS_CPU_IRQ_BASE + 0;
+	else if (pending & STATUSF_IP1)			/* user line 1 */
+		irq = MIPS_CPU_IRQ_BASE + 1;
+	else
+		irq = -1;
+	return irq;
+}
+
+void __init rbtx4927_irq_setup(void)
+{
+	txx9_irq_dispatch = rbtx4927_irq_dispatch;
+	tx4927_irq_init();
+	toshiba_rbtx4927_irq_ioc_init();
+	/* Onboard 10M Ether: High Active */
+	set_irq_type(RBTX4927_RTL_8019_IRQ, IRQF_TRIGGER_HIGH);
+}
diff --git a/arch/mips/txx9/rbtx4927/prom.c b/arch/mips/txx9/rbtx4927/prom.c
new file mode 100644
index 000000000000..1dc0a5b1956b
--- /dev/null
+++ b/arch/mips/txx9/rbtx4927/prom.c
@@ -0,0 +1,42 @@
+/*
+ * rbtx4927 specific prom routines
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <asm/bootinfo.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/rbtx4927.h>
+
+void __init rbtx4927_prom_init(void)
+{
+	prom_init_cmdline();
+	add_memory_region(0, tx4927_get_mem_size(), BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX4927_SIO_REG(0) & 0xfffffffffULL);
+}
diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c
new file mode 100644
index 000000000000..0d39bafea794
--- /dev/null
+++ b/arch/mips/txx9/rbtx4927/setup.c
@@ -0,0 +1,337 @@
+/*
+ * Toshiba rbtx4927 specific setup
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * Copyright 2001-2002 MontaVista Software Inc.
+ *
+ * Copyright (C) 1996, 97, 2001, 04  Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2002 MontaVista Software Inc.
+ * Author: Michael Pruznick, michael_pruznick@mvista.com
+ *
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License as published by the
+ *  Free Software Foundation; either version 2 of the License, or (at your
+ *  option) any later version.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ *  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ *  BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ *  OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ *  ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ *  TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ *  USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/reboot.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/rbtx4927.h>
+#include <asm/txx9/tx4938.h>	/* for TX4937 */
+
+#ifdef CONFIG_PCI
+static void __init tx4927_pci_setup(void)
+{
+	int extarb = !(__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCIARB);
+	struct pci_controller *c = &txx9_primary_pcic;
+
+	register_pci_controller(c);
+
+	if (__raw_readq(&tx4927_ccfgptr->ccfg) & TX4927_CCFG_PCI66)
+		txx9_pci_option =
+			(txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) |
+			TXX9_PCI_OPT_CLK_66; /* already configured */
+
+	/* Reset PCI Bus */
+	writeb(1, rbtx4927_pcireset_addr);
+	/* Reset PCIC */
+	txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_66)
+		tx4927_pciclk66_setup();
+	mdelay(10);
+	/* clear PCIC reset */
+	txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
+	writeb(0, rbtx4927_pcireset_addr);
+	iob();
+
+	tx4927_report_pciclk();
+	tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_AUTO &&
+	    txx9_pci66_check(c, 0, 0)) {
+		/* Reset PCI Bus */
+		writeb(1, rbtx4927_pcireset_addr);
+		/* Reset PCIC */
+		txx9_set64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
+		tx4927_pciclk66_setup();
+		mdelay(10);
+		/* clear PCIC reset */
+		txx9_clear64(&tx4927_ccfgptr->clkctr, TX4927_CLKCTR_PCIRST);
+		writeb(0, rbtx4927_pcireset_addr);
+		iob();
+		/* Reinitialize PCIC */
+		tx4927_report_pciclk();
+		tx4927_pcic_setup(tx4927_pcicptr, c, extarb);
+	}
+	tx4927_setup_pcierr_irq();
+}
+
+static void __init tx4937_pci_setup(void)
+{
+	int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB);
+	struct pci_controller *c = &txx9_primary_pcic;
+
+	register_pci_controller(c);
+
+	if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66)
+		txx9_pci_option =
+			(txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) |
+			TXX9_PCI_OPT_CLK_66; /* already configured */
+
+	/* Reset PCI Bus */
+	writeb(1, rbtx4927_pcireset_addr);
+	/* Reset PCIC */
+	txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_66)
+		tx4938_pciclk66_setup();
+	mdelay(10);
+	/* clear PCIC reset */
+	txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+	writeb(0, rbtx4927_pcireset_addr);
+	iob();
+
+	tx4938_report_pciclk();
+	tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_AUTO &&
+	    txx9_pci66_check(c, 0, 0)) {
+		/* Reset PCI Bus */
+		writeb(1, rbtx4927_pcireset_addr);
+		/* Reset PCIC */
+		txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+		tx4938_pciclk66_setup();
+		mdelay(10);
+		/* clear PCIC reset */
+		txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+		writeb(0, rbtx4927_pcireset_addr);
+		iob();
+		/* Reinitialize PCIC */
+		tx4938_report_pciclk();
+		tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
+	}
+	tx4938_setup_pcierr_irq();
+}
+
+static void __init rbtx4927_arch_init(void)
+{
+	tx4927_pci_setup();
+}
+
+static void __init rbtx4937_arch_init(void)
+{
+	tx4937_pci_setup();
+}
+#else
+#define rbtx4927_arch_init NULL
+#define rbtx4937_arch_init NULL
+#endif /* CONFIG_PCI */
+
+static void toshiba_rbtx4927_restart(char *command)
+{
+	/* enable the s/w reset register */
+	writeb(1, rbtx4927_softresetlock_addr);
+
+	/* wait for enable to be seen */
+	while (!(readb(rbtx4927_softresetlock_addr) & 1))
+		;
+
+	/* do a s/w reset */
+	writeb(1, rbtx4927_softreset_addr);
+
+	/* fallback */
+	(*_machine_halt)();
+}
+
+static void __init rbtx4927_clock_init(void);
+static void __init rbtx4937_clock_init(void);
+
+static void __init rbtx4927_mem_setup(void)
+{
+	u32 cp0_config;
+	char *argptr;
+
+	/* enable caches -- HCP5 does this, pmon does not */
+	cp0_config = read_c0_config();
+	cp0_config = cp0_config & ~(TX49_CONF_IC | TX49_CONF_DC);
+	write_c0_config(cp0_config);
+
+	if (TX4927_REV_PCODE() == 0x4927) {
+		rbtx4927_clock_init();
+		tx4927_setup();
+	} else {
+		rbtx4937_clock_init();
+		tx4938_setup();
+	}
+
+	_machine_restart = toshiba_rbtx4927_restart;
+
+#ifdef CONFIG_PCI
+	txx9_alloc_pci_controller(&txx9_primary_pcic,
+				  RBTX4927_PCIMEM, RBTX4927_PCIMEM_SIZE,
+				  RBTX4927_PCIIO, RBTX4927_PCIIO_SIZE);
+	txx9_board_pcibios_setup = tx4927_pcibios_setup;
+#else
+	set_io_port_base(KSEG1 + RBTX4927_ISA_IO_OFFSET);
+#endif
+
+	tx4927_sio_init(0, 0);
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+	argptr = prom_getcmdline();
+	if (!strstr(argptr, "console="))
+		strcat(argptr, " console=ttyS0,38400");
+#endif
+}
+
+static void __init rbtx4927_clock_init(void)
+{
+	/*
+	 * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
+	 *
+	 * For TX4927:
+	 * PCIDIVMODE[12:11]'s initial value is given by S9[4:3] (ON:0, OFF:1).
+	 * CPU 166MHz: PCI 66MHz : PCIDIVMODE: 00 (1/2.5)
+	 * CPU 200MHz: PCI 66MHz : PCIDIVMODE: 01 (1/3)
+	 * CPU 166MHz: PCI 33MHz : PCIDIVMODE: 10 (1/5)
+	 * CPU 200MHz: PCI 33MHz : PCIDIVMODE: 11 (1/6)
+	 * i.e. S9[3]: ON (83MHz), OFF (100MHz)
+	 */
+	switch ((unsigned long)__raw_readq(&tx4927_ccfgptr->ccfg) &
+		TX4927_CCFG_PCIDIVMODE_MASK) {
+	case TX4927_CCFG_PCIDIVMODE_2_5:
+	case TX4927_CCFG_PCIDIVMODE_5:
+		txx9_cpu_clock = 166666666;	/* 166MHz */
+		break;
+	default:
+		txx9_cpu_clock = 200000000;	/* 200MHz */
+	}
+}
+
+static void __init rbtx4937_clock_init(void)
+{
+	/*
+	 * ASSUMPTION: PCIDIVMODE is configured for PCI 33MHz or 66MHz.
+	 *
+	 * For TX4937:
+	 * PCIDIVMODE[12:11]'s initial value is given by S1[5:4] (ON:0, OFF:1)
+	 * PCIDIVMODE[10] is 0.
+	 * CPU 266MHz: PCI 33MHz : PCIDIVMODE: 000 (1/8)
+	 * CPU 266MHz: PCI 66MHz : PCIDIVMODE: 001 (1/4)
+	 * CPU 300MHz: PCI 33MHz : PCIDIVMODE: 010 (1/9)
+	 * CPU 300MHz: PCI 66MHz : PCIDIVMODE: 011 (1/4.5)
+	 * CPU 333MHz: PCI 33MHz : PCIDIVMODE: 100 (1/10)
+	 * CPU 333MHz: PCI 66MHz : PCIDIVMODE: 101 (1/5)
+	 */
+	switch ((unsigned long)__raw_readq(&tx4938_ccfgptr->ccfg) &
+		TX4938_CCFG_PCIDIVMODE_MASK) {
+	case TX4938_CCFG_PCIDIVMODE_8:
+	case TX4938_CCFG_PCIDIVMODE_4:
+		txx9_cpu_clock = 266666666;	/* 266MHz */
+		break;
+	case TX4938_CCFG_PCIDIVMODE_9:
+	case TX4938_CCFG_PCIDIVMODE_4_5:
+		txx9_cpu_clock = 300000000;	/* 300MHz */
+		break;
+	default:
+		txx9_cpu_clock = 333333333;	/* 333MHz */
+	}
+}
+
+static void __init rbtx4927_time_init(void)
+{
+	tx4927_time_init(0);
+}
+
+static void __init toshiba_rbtx4927_rtc_init(void)
+{
+	struct resource res = {
+		.start	= RBTX4927_BRAMRTC_BASE - IO_BASE,
+		.end	= RBTX4927_BRAMRTC_BASE - IO_BASE + 0x800 - 1,
+		.flags	= IORESOURCE_MEM,
+	};
+	platform_device_register_simple("rtc-ds1742", -1, &res, 1);
+}
+
+static void __init rbtx4927_ne_init(void)
+{
+	struct resource res[] = {
+		{
+			.start	= RBTX4927_RTL_8019_BASE,
+			.end	= RBTX4927_RTL_8019_BASE + 0x20 - 1,
+			.flags	= IORESOURCE_IO,
+		}, {
+			.start	= RBTX4927_RTL_8019_IRQ,
+			.flags	= IORESOURCE_IRQ,
+		}
+	};
+	platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
+}
+
+static void __init rbtx4927_device_init(void)
+{
+	toshiba_rbtx4927_rtc_init();
+	rbtx4927_ne_init();
+	tx4927_wdt_init();
+}
+
+struct txx9_board_vec rbtx4927_vec __initdata = {
+	.system = "Toshiba RBTX4927",
+	.prom_init = rbtx4927_prom_init,
+	.mem_setup = rbtx4927_mem_setup,
+	.irq_setup = rbtx4927_irq_setup,
+	.time_init = rbtx4927_time_init,
+	.device_init = rbtx4927_device_init,
+	.arch_init = rbtx4927_arch_init,
+#ifdef CONFIG_PCI
+	.pci_map_irq = rbtx4927_pci_map_irq,
+#endif
+};
+struct txx9_board_vec rbtx4937_vec __initdata = {
+	.system = "Toshiba RBTX4937",
+	.prom_init = rbtx4927_prom_init,
+	.mem_setup = rbtx4927_mem_setup,
+	.irq_setup = rbtx4927_irq_setup,
+	.time_init = rbtx4927_time_init,
+	.device_init = rbtx4927_device_init,
+	.arch_init = rbtx4937_arch_init,
+#ifdef CONFIG_PCI
+	.pci_map_irq = rbtx4927_pci_map_irq,
+#endif
+};
diff --git a/arch/mips/txx9/rbtx4938/Makefile b/arch/mips/txx9/rbtx4938/Makefile
new file mode 100644
index 000000000000..9dcc52ae5b9d
--- /dev/null
+++ b/arch/mips/txx9/rbtx4938/Makefile
@@ -0,0 +1,3 @@
+obj-y	+= prom.o setup.o irq.o spi_eeprom.o
+
+EXTRA_CFLAGS += -Werror
diff --git a/arch/mips/txx9/rbtx4938/irq.c b/arch/mips/txx9/rbtx4938/irq.c
new file mode 100644
index 000000000000..ca2f8306ce93
--- /dev/null
+++ b/arch/mips/txx9/rbtx4938/irq.c
@@ -0,0 +1,164 @@
+/*
+ * Toshiba RBTX4938 specific interrupt handlers
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+/*
+ * MIPS_CPU_IRQ_BASE+00 Software 0
+ * MIPS_CPU_IRQ_BASE+01 Software 1
+ * MIPS_CPU_IRQ_BASE+02 Cascade TX4938-CP0
+ * MIPS_CPU_IRQ_BASE+03 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+04 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+05 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+06 Multiplexed -- do not use
+ * MIPS_CPU_IRQ_BASE+07 CPU TIMER
+ *
+ * TXX9_IRQ_BASE+00
+ * TXX9_IRQ_BASE+01
+ * TXX9_IRQ_BASE+02 Cascade RBTX4938-IOC
+ * TXX9_IRQ_BASE+03 RBTX4938 RTL-8019AS Ethernet
+ * TXX9_IRQ_BASE+04
+ * TXX9_IRQ_BASE+05 TX4938 ETH1
+ * TXX9_IRQ_BASE+06 TX4938 ETH0
+ * TXX9_IRQ_BASE+07
+ * TXX9_IRQ_BASE+08 TX4938 SIO 0
+ * TXX9_IRQ_BASE+09 TX4938 SIO 1
+ * TXX9_IRQ_BASE+10 TX4938 DMA0
+ * TXX9_IRQ_BASE+11 TX4938 DMA1
+ * TXX9_IRQ_BASE+12 TX4938 DMA2
+ * TXX9_IRQ_BASE+13 TX4938 DMA3
+ * TXX9_IRQ_BASE+14
+ * TXX9_IRQ_BASE+15
+ * TXX9_IRQ_BASE+16 TX4938 PCIC
+ * TXX9_IRQ_BASE+17 TX4938 TMR0
+ * TXX9_IRQ_BASE+18 TX4938 TMR1
+ * TXX9_IRQ_BASE+19 TX4938 TMR2
+ * TXX9_IRQ_BASE+20
+ * TXX9_IRQ_BASE+21
+ * TXX9_IRQ_BASE+22 TX4938 PCIERR
+ * TXX9_IRQ_BASE+23
+ * TXX9_IRQ_BASE+24
+ * TXX9_IRQ_BASE+25
+ * TXX9_IRQ_BASE+26
+ * TXX9_IRQ_BASE+27
+ * TXX9_IRQ_BASE+28
+ * TXX9_IRQ_BASE+29
+ * TXX9_IRQ_BASE+30
+ * TXX9_IRQ_BASE+31 TX4938 SPI
+ *
+ * RBTX4938_IRQ_IOC+00 PCI-D
+ * RBTX4938_IRQ_IOC+01 PCI-C
+ * RBTX4938_IRQ_IOC+02 PCI-B
+ * RBTX4938_IRQ_IOC+03 PCI-A
+ * RBTX4938_IRQ_IOC+04 RTC
+ * RBTX4938_IRQ_IOC+05 ATA
+ * RBTX4938_IRQ_IOC+06 MODEM
+ * RBTX4938_IRQ_IOC+07 SWINT
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/mipsregs.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/rbtx4938.h>
+
+static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq);
+static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq);
+
+#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC"
+static struct irq_chip toshiba_rbtx4938_irq_ioc_type = {
+	.name = TOSHIBA_RBTX4938_IOC_NAME,
+	.ack = toshiba_rbtx4938_irq_ioc_disable,
+	.mask = toshiba_rbtx4938_irq_ioc_disable,
+	.mask_ack = toshiba_rbtx4938_irq_ioc_disable,
+	.unmask = toshiba_rbtx4938_irq_ioc_enable,
+};
+
+static int toshiba_rbtx4938_irq_nested(int sw_irq)
+{
+	u8 level3;
+
+	level3 = readb(rbtx4938_imstat_addr);
+	if (level3)
+		/* must use fls so onboard ATA has priority */
+		sw_irq = RBTX4938_IRQ_IOC + fls(level3) - 1;
+	return sw_irq;
+}
+
+static void __init
+toshiba_rbtx4938_irq_ioc_init(void)
+{
+	int i;
+
+	for (i = RBTX4938_IRQ_IOC;
+	     i < RBTX4938_IRQ_IOC + RBTX4938_NR_IRQ_IOC; i++)
+		set_irq_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type,
+					 handle_level_irq);
+
+	set_irq_chained_handler(RBTX4938_IRQ_IOCINT, handle_simple_irq);
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_enable(unsigned int irq)
+{
+	unsigned char v;
+
+	v = readb(rbtx4938_imask_addr);
+	v |= (1 << (irq - RBTX4938_IRQ_IOC));
+	writeb(v, rbtx4938_imask_addr);
+	mmiowb();
+}
+
+static void
+toshiba_rbtx4938_irq_ioc_disable(unsigned int irq)
+{
+	unsigned char v;
+
+	v = readb(rbtx4938_imask_addr);
+	v &= ~(1 << (irq - RBTX4938_IRQ_IOC));
+	writeb(v, rbtx4938_imask_addr);
+	mmiowb();
+}
+
+static int rbtx4938_irq_dispatch(int pending)
+{
+	int irq;
+
+	if (pending & STATUSF_IP7)
+		irq = MIPS_CPU_IRQ_BASE + 7;
+	else if (pending & STATUSF_IP2) {
+		irq = txx9_irq();
+		if (irq == RBTX4938_IRQ_IOCINT)
+			irq = toshiba_rbtx4938_irq_nested(irq);
+	} else if (pending & STATUSF_IP1)
+		irq = MIPS_CPU_IRQ_BASE + 0;
+	else if (pending & STATUSF_IP0)
+		irq = MIPS_CPU_IRQ_BASE + 1;
+	else
+		irq = -1;
+	return irq;
+}
+
+void __init rbtx4938_irq_setup(void)
+{
+	txx9_irq_dispatch = rbtx4938_irq_dispatch;
+	/* Now, interrupt control disabled, */
+	/* all IRC interrupts are masked, */
+	/* all IRC interrupt mode are Low Active. */
+
+	/* mask all IOC interrupts */
+	writeb(0, rbtx4938_imask_addr);
+
+	/* clear SoftInt interrupts */
+	writeb(0, rbtx4938_softint_addr);
+	tx4938_irq_init();
+	toshiba_rbtx4938_irq_ioc_init();
+	/* Onboard 10M Ether: High Active */
+	set_irq_type(RBTX4938_IRQ_ETHER, IRQF_TRIGGER_HIGH);
+}
diff --git a/arch/mips/txx9/rbtx4938/prom.c b/arch/mips/txx9/rbtx4938/prom.c
new file mode 100644
index 000000000000..d73123cd2ab9
--- /dev/null
+++ b/arch/mips/txx9/rbtx4938/prom.c
@@ -0,0 +1,26 @@
+/*
+ * rbtx4938 specific prom routines
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <asm/bootinfo.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/rbtx4938.h>
+
+void __init rbtx4938_prom_init(void)
+{
+#ifndef CONFIG_TX4938_NAND_BOOT
+	prom_init_cmdline();
+#endif
+	add_memory_region(0, tx4938_get_mem_size(), BOOT_MEM_RAM);
+	txx9_sio_putchar_init(TX4938_SIO_REG(0) & 0xfffffffffULL);
+}
diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c
new file mode 100644
index 000000000000..9ab48dec0fe8
--- /dev/null
+++ b/arch/mips/txx9/rbtx4938/setup.c
@@ -0,0 +1,322 @@
+/*
+ * Setup pointers to hardware-dependent routines.
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/reboot.h>
+#include <asm/io.h>
+#include <asm/txx9/generic.h>
+#include <asm/txx9/pci.h>
+#include <asm/txx9/rbtx4938.h>
+#include <linux/spi/spi.h>
+#include <asm/txx9/spi.h>
+#include <asm/txx9pio.h>
+
+static void rbtx4938_machine_restart(char *command)
+{
+	local_irq_disable();
+	writeb(1, rbtx4938_softresetlock_addr);
+	writeb(1, rbtx4938_sfvol_addr);
+	writeb(1, rbtx4938_softreset_addr);
+	/* fallback */
+	(*_machine_halt)();
+}
+
+static void __init rbtx4938_pci_setup(void)
+{
+#ifdef CONFIG_PCI
+	int extarb = !(__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCIARB);
+	struct pci_controller *c = &txx9_primary_pcic;
+
+	register_pci_controller(c);
+
+	if (__raw_readq(&tx4938_ccfgptr->ccfg) & TX4938_CCFG_PCI66)
+		txx9_pci_option =
+			(txx9_pci_option & ~TXX9_PCI_OPT_CLK_MASK) |
+			TXX9_PCI_OPT_CLK_66; /* already configured */
+
+	/* Reset PCI Bus */
+	writeb(0, rbtx4938_pcireset_addr);
+	/* Reset PCIC */
+	txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_66)
+		tx4938_pciclk66_setup();
+	mdelay(10);
+	/* clear PCIC reset */
+	txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+	writeb(1, rbtx4938_pcireset_addr);
+	iob();
+
+	tx4938_report_pciclk();
+	tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
+	if ((txx9_pci_option & TXX9_PCI_OPT_CLK_MASK) ==
+	    TXX9_PCI_OPT_CLK_AUTO &&
+	    txx9_pci66_check(c, 0, 0)) {
+		/* Reset PCI Bus */
+		writeb(0, rbtx4938_pcireset_addr);
+		/* Reset PCIC */
+		txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+		tx4938_pciclk66_setup();
+		mdelay(10);
+		/* clear PCIC reset */
+		txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIRST);
+		writeb(1, rbtx4938_pcireset_addr);
+		iob();
+		/* Reinitialize PCIC */
+		tx4938_report_pciclk();
+		tx4927_pcic_setup(tx4938_pcicptr, c, extarb);
+	}
+
+	if (__raw_readq(&tx4938_ccfgptr->pcfg) &
+	    (TX4938_PCFG_ETH0_SEL|TX4938_PCFG_ETH1_SEL)) {
+		/* Reset PCIC1 */
+		txx9_set64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
+		/* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */
+		if (!(__raw_readq(&tx4938_ccfgptr->ccfg)
+		      & TX4938_CCFG_PCI1DMD))
+			tx4938_ccfg_set(TX4938_CCFG_PCI1_66);
+		mdelay(10);
+		/* clear PCIC1 reset */
+		txx9_clear64(&tx4938_ccfgptr->clkctr, TX4938_CLKCTR_PCIC1RST);
+		tx4938_report_pci1clk();
+
+		/* mem:64K(max), io:64K(max) (enough for ETH0,ETH1) */
+		c = txx9_alloc_pci_controller(NULL, 0, 0x10000, 0, 0x10000);
+		register_pci_controller(c);
+		tx4927_pcic_setup(tx4938_pcic1ptr, c, 0);
+	}
+	tx4938_setup_pcierr_irq();
+#endif /* CONFIG_PCI */
+}
+
+/* SPI support */
+
+/* chip select for SPI devices */
+#define	SEEPROM1_CS	7	/* PIO7 */
+#define	SEEPROM2_CS	0	/* IOC */
+#define	SEEPROM3_CS	1	/* IOC */
+#define	SRTC_CS	2	/* IOC */
+
+static int __init rbtx4938_ethaddr_init(void)
+{
+#ifdef CONFIG_PCI
+	unsigned char dat[17];
+	unsigned char sum;
+	int i;
+
+	/* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */
+	if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) {
+		printk(KERN_ERR "seeprom: read error.\n");
+		return -ENODEV;
+	} else {
+		if (strcmp(dat, "MAC") != 0)
+			printk(KERN_WARNING "seeprom: bad signature.\n");
+		for (i = 0, sum = 0; i < sizeof(dat); i++)
+			sum += dat[i];
+		if (sum)
+			printk(KERN_WARNING "seeprom: bad checksum.\n");
+	}
+	tx4938_ethaddr_init(&dat[4], &dat[4 + 6]);
+#endif /* CONFIG_PCI */
+	return 0;
+}
+
+static void __init rbtx4938_spi_setup(void)
+{
+	/* set SPI_SEL */
+	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_SPI_SEL);
+}
+
+static struct resource rbtx4938_fpga_resource;
+
+static void __init rbtx4938_time_init(void)
+{
+	tx4938_time_init(0);
+}
+
+static void __init rbtx4938_mem_setup(void)
+{
+	unsigned long long pcfg;
+	char *argptr;
+
+	if (txx9_master_clock == 0)
+		txx9_master_clock = 25000000; /* 25MHz */
+
+	tx4938_setup();
+
+#ifdef CONFIG_PCI
+	txx9_alloc_pci_controller(&txx9_primary_pcic, 0, 0, 0, 0);
+	txx9_board_pcibios_setup = tx4927_pcibios_setup;
+#else
+	set_io_port_base(RBTX4938_ETHER_BASE);
+#endif
+
+	tx4938_sio_init(7372800, 0);
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+	argptr = prom_getcmdline();
+	if (!strstr(argptr, "console="))
+		strcat(argptr, " console=ttyS0,38400");
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61
+	printk(KERN_INFO "PIOSEL: disabling both ata and nand selection\n");
+	txx9_clear64(&tx4938_ccfgptr->pcfg,
+		     TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL);
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND
+	printk(KERN_INFO "PIOSEL: enabling nand selection\n");
+	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
+	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
+#endif
+
+#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA
+	printk(KERN_INFO "PIOSEL: enabling ata selection\n");
+	txx9_set64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_ATA_SEL);
+	txx9_clear64(&tx4938_ccfgptr->pcfg, TX4938_PCFG_NDF_SEL);
+#endif
+
+	rbtx4938_spi_setup();
+	pcfg = ____raw_readq(&tx4938_ccfgptr->pcfg);	/* updated */
+	/* fixup piosel */
+	if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
+	    TX4938_PCFG_ATA_SEL)
+		writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x04,
+		       rbtx4938_piosel_addr);
+	else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) ==
+		 TX4938_PCFG_NDF_SEL)
+		writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x08,
+		       rbtx4938_piosel_addr);
+	else
+		writeb(readb(rbtx4938_piosel_addr) & ~(0x08 | 0x04),
+		       rbtx4938_piosel_addr);
+
+	rbtx4938_fpga_resource.name = "FPGA Registers";
+	rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR);
+	rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff;
+	rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY;
+	if (request_resource(&txx9_ce_res[2], &rbtx4938_fpga_resource))
+		printk(KERN_ERR "request resource for fpga failed\n");
+
+	_machine_restart = rbtx4938_machine_restart;
+
+	writeb(0xff, rbtx4938_led_addr);
+	printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n",
+	       readb(rbtx4938_fpga_rev_addr),
+	       readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr));
+}
+
+static void __init rbtx4938_ne_init(void)
+{
+	struct resource res[] = {
+		{
+			.start	= RBTX4938_RTL_8019_BASE,
+			.end	= RBTX4938_RTL_8019_BASE + 0x20 - 1,
+			.flags	= IORESOURCE_IO,
+		}, {
+			.start	= RBTX4938_RTL_8019_IRQ,
+			.flags	= IORESOURCE_IRQ,
+		}
+	};
+	platform_device_register_simple("ne", -1, res, ARRAY_SIZE(res));
+}
+
+static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock);
+
+static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset,
+				  int value)
+{
+	u8 val;
+	unsigned long flags;
+	spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags);
+	val = readb(rbtx4938_spics_addr);
+	if (value)
+		val |= 1 << offset;
+	else
+		val &= ~(1 << offset);
+	writeb(val, rbtx4938_spics_addr);
+	mmiowb();
+	spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags);
+}
+
+static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip,
+				     unsigned int offset, int value)
+{
+	rbtx4938_spi_gpio_set(chip, offset, value);
+	return 0;
+}
+
+static struct gpio_chip rbtx4938_spi_gpio_chip = {
+	.set = rbtx4938_spi_gpio_set,
+	.direction_output = rbtx4938_spi_gpio_dir_out,
+	.label = "RBTX4938-SPICS",
+	.base = 16,
+	.ngpio = 3,
+};
+
+static int __init rbtx4938_spi_init(void)
+{
+	struct spi_board_info srtc_info = {
+		.modalias = "rtc-rs5c348",
+		.max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */
+		.bus_num = 0,
+		.chip_select = 16 + SRTC_CS,
+		/* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS  */
+		.mode = SPI_MODE_1 | SPI_CS_HIGH,
+	};
+	spi_register_board_info(&srtc_info, 1);
+	spi_eeprom_register(SEEPROM1_CS);
+	spi_eeprom_register(16 + SEEPROM2_CS);
+	spi_eeprom_register(16 + SEEPROM3_CS);
+	gpio_request(16 + SRTC_CS, "rtc-rs5c348");
+	gpio_direction_output(16 + SRTC_CS, 0);
+	gpio_request(SEEPROM1_CS, "seeprom1");
+	gpio_direction_output(SEEPROM1_CS, 1);
+	gpio_request(16 + SEEPROM2_CS, "seeprom2");
+	gpio_direction_output(16 + SEEPROM2_CS, 1);
+	gpio_request(16 + SEEPROM3_CS, "seeprom3");
+	gpio_direction_output(16 + SEEPROM3_CS, 1);
+	tx4938_spi_init(0);
+	return 0;
+}
+
+static void __init rbtx4938_arch_init(void)
+{
+	gpiochip_add(&rbtx4938_spi_gpio_chip);
+	rbtx4938_pci_setup();
+	rbtx4938_spi_init();
+}
+
+static void __init rbtx4938_device_init(void)
+{
+	rbtx4938_ethaddr_init();
+	rbtx4938_ne_init();
+	tx4938_wdt_init();
+}
+
+struct txx9_board_vec rbtx4938_vec __initdata = {
+	.system = "Toshiba RBTX4938",
+	.prom_init = rbtx4938_prom_init,
+	.mem_setup = rbtx4938_mem_setup,
+	.irq_setup = rbtx4938_irq_setup,
+	.time_init = rbtx4938_time_init,
+	.device_init = rbtx4938_device_init,
+	.arch_init = rbtx4938_arch_init,
+#ifdef CONFIG_PCI
+	.pci_map_irq = rbtx4938_pci_map_irq,
+#endif
+};
diff --git a/arch/mips/txx9/rbtx4938/spi_eeprom.c b/arch/mips/txx9/rbtx4938/spi_eeprom.c
new file mode 100644
index 000000000000..a7ea8b041c1d
--- /dev/null
+++ b/arch/mips/txx9/rbtx4938/spi_eeprom.c
@@ -0,0 +1,99 @@
+/*
+ * spi_eeprom.c
+ * Copyright (C) 2000-2001 Toshiba Corporation
+ *
+ * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is
+ * licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com)
+ */
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+#include <asm/txx9/spi.h>
+
+#define AT250X0_PAGE_SIZE	8
+
+/* register board information for at25 driver */
+int __init spi_eeprom_register(int chipid)
+{
+	static struct spi_eeprom eeprom = {
+		.name = "at250x0",
+		.byte_len = 128,
+		.page_size = AT250X0_PAGE_SIZE,
+		.flags = EE_ADDR1,
+	};
+	struct spi_board_info info = {
+		.modalias = "at25",
+		.max_speed_hz = 1500000,	/* 1.5Mbps */
+		.bus_num = 0,
+		.chip_select = chipid,
+		.platform_data = &eeprom,
+		/* Mode 0: High-Active, Sample-Then-Shift */
+	};
+
+	return spi_register_board_info(&info, 1);
+}
+
+/* simple temporary spi driver to provide early access to seeprom. */
+
+static struct read_param {
+	int chipid;
+	int address;
+	unsigned char *buf;
+	int len;
+} *read_param;
+
+static int __init early_seeprom_probe(struct spi_device *spi)
+{
+	int stat = 0;
+	u8 cmd[2];
+	int len = read_param->len;
+	char *buf = read_param->buf;
+	int address = read_param->address;
+
+	dev_info(&spi->dev, "spiclk %u KHz.\n",
+		 (spi->max_speed_hz + 500) / 1000);
+	if (read_param->chipid != spi->chip_select)
+		return -ENODEV;
+	while (len > 0) {
+		/* spi_write_then_read can only work with small chunk */
+		int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE;
+		cmd[0] = 0x03;	/* AT25_READ */
+		cmd[1] = address;
+		stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c);
+		buf += c;
+		len -= c;
+		address += c;
+	}
+	return stat;
+}
+
+static struct spi_driver early_seeprom_driver __initdata = {
+	.driver = {
+		.name	= "at25",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= early_seeprom_probe,
+};
+
+int __init spi_eeprom_read(int chipid, int address,
+			   unsigned char *buf, int len)
+{
+	int ret;
+	struct read_param param = {
+		.chipid = chipid,
+		.address = address,
+		.buf = buf,
+		.len = len
+	};
+
+	read_param = &param;
+	ret = spi_register_driver(&early_seeprom_driver);
+	if (!ret)
+		spi_unregister_driver(&early_seeprom_driver);
+	return ret;
+}
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
index 559acc09c819..c1be6b37fb2a 100644
--- a/arch/mips/vr41xx/Kconfig
+++ b/arch/mips/vr41xx/Kconfig
@@ -23,16 +23,6 @@ config IBM_WORKPAD
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 
-config NEC_CMBVR4133
-	bool "NEC CMB-VR4133"
-	select CEVT_R4K
-	select CSRC_R4K
-	select DMA_NONCOHERENT
-	select IRQ_CPU
-	select HW_HAS_PCI
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-
 config TANBAC_TB022X
 	bool "TANBAC VR4131 multichip module and TANBAC VR4131DIMM"
 	select CEVT_R4K
@@ -73,13 +63,6 @@ config ZAO_CAPCELLA
 
 endchoice
 
-config ROCKHOPPER
-	bool "Support for Rockhopper base board"
-	depends on NEC_CMBVR4133
-	select PCI_VR41XX
-	select I8259
-	select HAVE_STD_PC_SERIAL_PORT
-
 choice
 	prompt "Base board type"
 	depends on TANBAC_TB022X
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/Makefile b/arch/mips/vr41xx/nec-cmbvr4133/Makefile
deleted file mode 100644
index 5835cae54aca..000000000000
--- a/arch/mips/vr41xx/nec-cmbvr4133/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the NEC-CMBVR4133
-#
-
-obj-y				:= init.o setup.o
-
-obj-$(CONFIG_PCI)		+= m1535plus.o
-obj-$(CONFIG_ROCKHOPPER)	+= irq.o
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/init.c b/arch/mips/vr41xx/nec-cmbvr4133/init.c
deleted file mode 100644
index 7c5e18ee2231..000000000000
--- a/arch/mips/vr41xx/nec-cmbvr4133/init.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * arch/mips/vr41xx/nec-cmbvr4133/init.c
- *
- * PROM library initialisation code for NEC CMB-VR4133 board.
- *
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
- *         Jun Sun <jsun@mvista.com, or source@mvista.com> and
- *         Alex Sapkov <asapkov@ru.mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for NEC-CMBVR4133 in 2.6
- * Manish Lachwani (mlachwani@mvista.com)
- */
-
-#ifdef CONFIG_ROCKHOPPER
-#include <asm/io.h>
-#include <linux/pci.h>
-
-#define PCICONFDREG	0xaf000c14
-#define PCICONFAREG	0xaf000c18
-
-void disable_pcnet(void)
-{
-	u32 data;
-
-	/*
-	 * Workaround for the bug in PMON on VR4133. PMON leaves
-	 * AMD PCNet controller (on Rockhopper) initialized and running in
-	 * bus master mode. We have do disable it before doing any
-	 * further initialization. Or we get problems with PCI bus 2
-	 * and random lockups and crashes.
-	 */
-
-	writel((2 << 16)		|
-	       (PCI_DEVFN(1, 0) << 8)	|
-	       (0 & 0xfc)		|
-               1UL,
-	       PCICONFAREG);
-
-	data = readl(PCICONFDREG);
-
-	writel((2 << 16)		|
-	       (PCI_DEVFN(1, 0) << 8)	|
-	       (4 & 0xfc)		|
-               1UL,
-	       PCICONFAREG);
-
-	data = readl(PCICONFDREG);
-
-	writel((2 << 16)		|
-	       (PCI_DEVFN(1, 0) << 8)	|
-	       (4 & 0xfc)		|
-               1UL,
-	       PCICONFAREG);
-
-	data &= ~4;
-
-	writel(data, PCICONFDREG);
-}
-#endif
-
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/irq.c b/arch/mips/vr41xx/nec-cmbvr4133/irq.c
deleted file mode 100644
index 7d2d076b0f54..000000000000
--- a/arch/mips/vr41xx/nec-cmbvr4133/irq.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * arch/mips/vr41xx/nec-cmbvr4133/irq.c
- *
- * Interrupt routines for the NEC CMB-VR4133 board.
- *
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
- *         Alex Sapkov <asapkov@ru.mvista.com>
- *
- * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for NEC-CMBVR4133 in 2.6
- * Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/i8259.h>
-#include <asm/vr41xx/cmbvr4133.h>
-
-extern int vr4133_rockhopper;
-
-static int i8259_get_irq_number(int irq)
-{
-	return i8259_irq();
-}
-
-void __init rockhopper_init_irq(void)
-{
-	int i;
-
-	if(!vr4133_rockhopper) {
-		printk(KERN_ERR "Not a Rockhopper Board \n");
-		return;
-	}
-
-	vr41xx_set_irq_trigger(CMBVR41XX_INTC_PIN, TRIGGER_LEVEL, SIGNAL_THROUGH);
-	vr41xx_set_irq_level(CMBVR41XX_INTC_PIN, LEVEL_HIGH);
-	vr41xx_cascade_irq(CMBVR41XX_INTC_IRQ, i8259_get_irq_number);
-}
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c b/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c
deleted file mode 100644
index 1341f3287d04..000000000000
--- a/arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * arch/mips/vr41xx/nec-cmbvr4133/m1535plus.c
- *
- * Initialize for ALi M1535+(included M5229 and M5237).
- *
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
- *         Alex Sapkov <asapkov@ru.mvista.com>
- *
- * 2003-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for NEC-CMBVR4133 in 2.6
- * Author: Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/serial.h>
-
-#include <asm/vr41xx/cmbvr4133.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-
-#define CONFIG_PORT(port)	((port) ? 0x3f0 : 0x370)
-#define DATA_PORT(port)		((port) ? 0x3f1 : 0x371)
-#define INDEX_PORT(port)	CONFIG_PORT(port)
-
-#define ENTER_CONFIG_MODE(port)				\
-	do {						\
-		outb_p(0x51, CONFIG_PORT(port));	\
-		outb_p(0x23, CONFIG_PORT(port));	\
-	} while(0)
-
-#define SELECT_LOGICAL_DEVICE(port, dev_no)		\
-	do {						\
-		outb_p(0x07, INDEX_PORT(port));		\
-		outb_p((dev_no), DATA_PORT(port));	\
-	} while(0)
-
-#define WRITE_CONFIG_DATA(port, index, data)		\
-	do {						\
-		outb_p((index), INDEX_PORT(port));	\
-		outb_p((data), DATA_PORT(port));	\
-	} while(0)
-
-#define EXIT_CONFIG_MODE(port)	outb(0xbb, CONFIG_PORT(port))
-
-#define PCI_CONFIG_ADDR	KSEG1ADDR(0x0f000c18)
-#define PCI_CONFIG_DATA	KSEG1ADDR(0x0f000c14)
-
-#ifdef CONFIG_BLK_DEV_FD
-
-void __devinit ali_m1535plus_fdc_init(int port)
-{
-	ENTER_CONFIG_MODE(port);
-	SELECT_LOGICAL_DEVICE(port, 0);		/* FDC */
-	WRITE_CONFIG_DATA(port, 0x30, 0x01);	/* FDC: enable */
-	WRITE_CONFIG_DATA(port, 0x60, 0x03);	/* I/O port base: 0x3f0 */
-	WRITE_CONFIG_DATA(port, 0x61, 0xf0);
-	WRITE_CONFIG_DATA(port, 0x70, 0x06);	/* IRQ: 6 */
-	WRITE_CONFIG_DATA(port, 0x74, 0x02);	/* DMA: channel 2 */
-	WRITE_CONFIG_DATA(port, 0xf0, 0x08);
-	WRITE_CONFIG_DATA(port, 0xf1, 0x00);
-	WRITE_CONFIG_DATA(port, 0xf2, 0xff);
-	WRITE_CONFIG_DATA(port, 0xf4, 0x00);
-	EXIT_CONFIG_MODE(port);
-}
-
-#endif
-
-void __devinit ali_m1535plus_parport_init(int port)
-{
-	ENTER_CONFIG_MODE(port);
-	SELECT_LOGICAL_DEVICE(port, 3);		/* Parallel Port */
-	WRITE_CONFIG_DATA(port, 0x30, 0x01);
-	WRITE_CONFIG_DATA(port, 0x60, 0x03);	/* I/O port base: 0x378 */
-	WRITE_CONFIG_DATA(port, 0x61, 0x78);
-	WRITE_CONFIG_DATA(port, 0x70, 0x07);	/* IRQ: 7 */
-	WRITE_CONFIG_DATA(port, 0x74, 0x04);	/* DMA: None */
-	WRITE_CONFIG_DATA(port, 0xf0, 0x8c);	/* IRQ polarity: Active Low */
-	WRITE_CONFIG_DATA(port, 0xf1, 0xc5);
-	EXIT_CONFIG_MODE(port);
-}
-
-void __devinit ali_m1535plus_keyboard_init(int port)
-{
-	ENTER_CONFIG_MODE(port);
-	SELECT_LOGICAL_DEVICE(port, 7);		/* KEYBOARD */
-	WRITE_CONFIG_DATA(port, 0x30, 0x01);	/* KEYBOARD: eable */
-	WRITE_CONFIG_DATA(port, 0x70, 0x01);	/* IRQ: 1 */
-	WRITE_CONFIG_DATA(port, 0x72, 0x0c);	/* PS/2 Mouse IRQ: 12 */
-	WRITE_CONFIG_DATA(port, 0xf0, 0x00);
-	EXIT_CONFIG_MODE(port);
-}
-
-void __devinit ali_m1535plus_hotkey_init(int port)
-{
-	ENTER_CONFIG_MODE(port);
-	SELECT_LOGICAL_DEVICE(port, 0xc);	/* HOTKEY */
-	WRITE_CONFIG_DATA(port, 0x30, 0x00);
-	WRITE_CONFIG_DATA(port, 0xf0, 0x35);
-	WRITE_CONFIG_DATA(port, 0xf1, 0x14);
-	WRITE_CONFIG_DATA(port, 0xf2, 0x11);
-	WRITE_CONFIG_DATA(port, 0xf3, 0x71);
-	WRITE_CONFIG_DATA(port, 0xf5, 0x05);
-	EXIT_CONFIG_MODE(port);
-}
-
-void ali_m1535plus_init(struct pci_dev *dev)
-{
-	pci_write_config_byte(dev, 0x40, 0x18); /* PCI Interface Control */
-	pci_write_config_byte(dev, 0x41, 0xc0); /* PS2 keyb & mouse enable */
-	pci_write_config_byte(dev, 0x42, 0x41); /* ISA bus cycle control */
-	pci_write_config_byte(dev, 0x43, 0x00); /* ISA bus cycle control 2 */
-	pci_write_config_byte(dev, 0x44, 0x5d); /* IDE enable & IRQ 14 */
-	pci_write_config_byte(dev, 0x45, 0x0b); /* PCI int polling mode */
-	pci_write_config_byte(dev, 0x47, 0x00); /* BIOS chip select control */
-
-	/* IRQ routing */
-	pci_write_config_byte(dev, 0x48, 0x03); /* INTA IRQ10, INTB disable */
-	pci_write_config_byte(dev, 0x49, 0x00); /* INTC and INTD disable */
-	pci_write_config_byte(dev, 0x4a, 0x00); /* INTE and INTF disable */
-	pci_write_config_byte(dev, 0x4b, 0x90); /* Audio IRQ11, Modem disable */
-
-	pci_write_config_word(dev, 0x50, 0x4000); /* Parity check IDE enable */
-	pci_write_config_word(dev, 0x52, 0x0000); /* USB & RTC disable */
-	pci_write_config_word(dev, 0x54, 0x0002); /* ??? no info */
-	pci_write_config_word(dev, 0x56, 0x0002); /* PCS1J signal disable */
-
-	pci_write_config_byte(dev, 0x59, 0x00); /* PCSDS */
-	pci_write_config_byte(dev, 0x5a, 0x00);
-	pci_write_config_byte(dev, 0x5b, 0x00);
-	pci_write_config_word(dev, 0x5c, 0x0000);
-	pci_write_config_byte(dev, 0x5e, 0x00);
-	pci_write_config_byte(dev, 0x5f, 0x00);
-	pci_write_config_word(dev, 0x60, 0x0000);
-
-	pci_write_config_byte(dev, 0x6c, 0x00);
-	pci_write_config_byte(dev, 0x6d, 0x48); /* ROM address mapping */
-	pci_write_config_byte(dev, 0x6e, 0x00); /* ??? what for? */
-
-	pci_write_config_byte(dev, 0x70, 0x12); /* Serial IRQ control */
-	pci_write_config_byte(dev, 0x71, 0xEF); /* DMA channel select */
-	pci_write_config_byte(dev, 0x72, 0x03); /* USB IDSEL */
-	pci_write_config_byte(dev, 0x73, 0x00); /* ??? no info */
-
-	/*
-	 * IRQ setup ALi M5237 USB Host Controller
-	 * IRQ: 9
-	 */
-	pci_write_config_byte(dev, 0x74, 0x01); /* USB IRQ9 */
-
-	pci_write_config_byte(dev, 0x75, 0x1f); /* IDE2 IRQ 15  */
-	pci_write_config_byte(dev, 0x76, 0x80); /* ACPI disable */
-	pci_write_config_byte(dev, 0x77, 0x40); /* Modem disable */
-	pci_write_config_dword(dev, 0x78, 0x20000000); /* Pin select 2 */
-	pci_write_config_byte(dev, 0x7c, 0x00); /* Pin select 3 */
-	pci_write_config_byte(dev, 0x81, 0x00); /* ID read/write control */
-	pci_write_config_byte(dev, 0x90, 0x00); /* PCI PM block control */
-	pci_write_config_word(dev, 0xa4, 0x0000); /* PMSCR */
-
-#ifdef CONFIG_BLK_DEV_FD
-	ali_m1535plus_fdc_init(1);
-#endif
-
-	ali_m1535plus_keyboard_init(1);
-	ali_m1535plus_hotkey_init(1);
-}
-
-static inline void ali_config_writeb(u8 reg, u8 val, int devfn)
-{
-	u32 data;
-	int shift;
-
-	writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
-        data = readl(PCI_CONFIG_DATA);
-
-	shift = (reg & 3) << 3;
-	data &= ~(0xff << shift);
-	data |= (((u32)val) << shift);
-
-	writel(data, PCI_CONFIG_DATA);
-}
-
-static inline u8 ali_config_readb(u8 reg, int devfn)
-{
-	u32 data;
-
-	writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
-	data = readl(PCI_CONFIG_DATA);
-
-	return (u8)(data >> ((reg & 3) << 3));
-}
-
-static inline u16 ali_config_readw(u8 reg, int devfn)
-{
-	u32 data;
-
-	writel((1 << 16) | (devfn << 8) | (reg & 0xfc) | 1UL, PCI_CONFIG_ADDR);
-	data = readl(PCI_CONFIG_DATA);
-
-	return (u16)(data >> ((reg & 2) << 3));
-}
-
-int vr4133_rockhopper = 0;
-void __init ali_m5229_preinit(void)
-{
-	if (ali_config_readw(PCI_VENDOR_ID, 16) == PCI_VENDOR_ID_AL &&
-	    ali_config_readw(PCI_DEVICE_ID, 16) == PCI_DEVICE_ID_AL_M1533) {
-		printk(KERN_INFO "Found an NEC Rockhopper \n");
-		vr4133_rockhopper = 1;
-		/*
-		 * Enable ALi M5229 IDE Controller (both channels)
-		 * IDSEL: A27
-		 */
-		ali_config_writeb(0x58, 0x4c, 16);
-	}
-}
-
-void __init ali_m5229_init(struct pci_dev *dev)
-{
-	/*
-	 * Enable Primary/Secondary Channel Cable Detect 40-Pin
-	 */
-	pci_write_config_word(dev, 0x4a, 0xc023);
-
-	/*
-	 * Set only the 3rd byteis for the master IDE's cycle and
-	 * enable Internal IDE Function
-	 */
-	pci_write_config_byte(dev, 0x50, 0x23); /* Class code attr register */
-
-	pci_write_config_byte(dev, 0x09, 0xff); /* Set native mode & stuff */
-	pci_write_config_byte(dev, 0x52, 0x00); /* use timing registers */
-	pci_write_config_byte(dev, 0x58, 0x02); /* Primary addr setup timing */
-	pci_write_config_byte(dev, 0x59, 0x22); /* Primary cmd block timing */
-	pci_write_config_byte(dev, 0x5a, 0x22); /* Pr drv 0 R/W timing */
-	pci_write_config_byte(dev, 0x5b, 0x22); /* Pr drv 1 R/W timing */
-	pci_write_config_byte(dev, 0x5c, 0x02); /* Sec addr setup timing */
-	pci_write_config_byte(dev, 0x5d, 0x22); /* Sec cmd block timing */
-	pci_write_config_byte(dev, 0x5e, 0x22); /* Sec drv 0 R/W timing */
-	pci_write_config_byte(dev, 0x5f, 0x22); /* Sec drv 1 R/W timing */
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
-	pci_write_config_word(dev, PCI_COMMAND,
-	                           PCI_COMMAND_PARITY | PCI_COMMAND_MASTER |
-				   PCI_COMMAND_IO);
-}
-
diff --git a/arch/mips/vr41xx/nec-cmbvr4133/setup.c b/arch/mips/vr41xx/nec-cmbvr4133/setup.c
deleted file mode 100644
index 7723d2011b08..000000000000
--- a/arch/mips/vr41xx/nec-cmbvr4133/setup.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * arch/mips/vr41xx/nec-cmbvr4133/setup.c
- *
- * Setup for the NEC CMB-VR4133.
- *
- * Author: Yoichi Yuasa <yyuasa@mvista.com, or source@mvista.com> and
- *         Alex Sapkov <asapkov@ru.mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Support for CMBVR4133 board in 2.6
- * Author: Manish Lachwani (mlachwani@mvista.com)
- */
-#include <linux/init.h>
-#include <linux/ide.h>
-#include <linux/ioport.h>
-
-#include <asm/reboot.h>
-#include <asm/time.h>
-#include <asm/vr41xx/cmbvr4133.h>
-#include <asm/bootinfo.h>
-
-#ifdef CONFIG_MTD
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-
-static struct mtd_partition cmbvr4133_mtd_parts[] = {
-	{
-		.name =		"User FS",
-		.size =		0x1be0000,
-		.offset =	0,
-		.mask_flags = 	0,
-	},
-	{
-		.name =		"PMON",
-		.size =		0x140000,
-		.offset =	MTDPART_OFS_APPEND,
-		.mask_flags =	MTD_WRITEABLE,  /* force read-only */
-	},
-	{
-		.name =		"User FS2",
-		.size =		MTDPART_SIZ_FULL,
-		.offset =	MTDPART_OFS_APPEND,
-		.mask_flags = 	0,
-	}
-};
-
-#define number_partitions ARRAY_SIZE(cmbvr4133_mtd_parts)
-#endif
-
-extern void i8259_init(void);
-
-static void __init nec_cmbvr4133_setup(void)
-{
-#ifdef CONFIG_ROCKHOPPER
-	extern void disable_pcnet(void);
-
-	disable_pcnet();
-#endif
-	set_io_port_base(KSEG1ADDR(0x16000000));
-
-#ifdef CONFIG_PCI
-#ifdef CONFIG_ROCKHOPPER
-	ali_m5229_preinit();
-#endif
-#endif
-
-#ifdef CONFIG_ROCKHOPPER
-	rockhopper_init_irq();
-#endif
-
-#ifdef CONFIG_MTD
-	/* we use generic physmap mapping driver and we use partitions */
-	physmap_configure(0x1C000000, 0x02000000, 4, NULL);
-	physmap_set_partitions(cmbvr4133_mtd_parts, number_partitions);
-#endif
-
-	/* 128 MB memory support */
-	add_memory_region(0, 0x08000000, BOOT_MEM_RAM);
-
-#ifdef CONFIG_ROCKHOPPER
-	i8259_init();
-#endif
-}
diff --git a/arch/mn10300/boot/compressed/misc.c b/arch/mn10300/boot/compressed/misc.c
index ded207efc97a..f673383518e4 100644
--- a/arch/mn10300/boot/compressed/misc.c
+++ b/arch/mn10300/boot/compressed/misc.c
@@ -153,26 +153,9 @@ static uch *output_data;
 static unsigned long output_ptr;
 
 
-static void *malloc(int size);
-
-static inline void free(void *where)
-{	/* Don't care */
-}
-
 static unsigned long free_mem_ptr = (unsigned long) &end;
 static unsigned long free_mem_end_ptr = (unsigned long) &end + 0x90000;
 
-static inline void gzip_mark(void **ptr)
-{
-	kputs(".");
-	*ptr = (void *) free_mem_ptr;
-}
-
-static inline void gzip_release(void **ptr)
-{
-	free_mem_ptr = (unsigned long) *ptr;
-}
-
 #define INPLACE_MOVE_ROUTINE	0x1000
 #define LOW_BUFFER_START	0x2000
 #define LOW_BUFFER_END		0x90000
@@ -186,26 +169,6 @@ static int lines, cols;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		error("Malloc error\n");
-	if (!free_mem_ptr)
-		error("Memory error\n");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *) free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("\nOut of memory\n");
-
-	return p;
-}
-
 static inline void scroll(void)
 {
 	int i;
diff --git a/arch/mn10300/kernel/entry.S b/arch/mn10300/kernel/entry.S
index 11de3606eee6..b7cbb1487af4 100644
--- a/arch/mn10300/kernel/entry.S
+++ b/arch/mn10300/kernel/entry.S
@@ -716,6 +716,12 @@ ENTRY(sys_call_table)
 	.long sys_fallocate		/* 325 */
 	.long sys_timerfd_settime
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1		/* 330 */
+	.long sys_dup3
+	.long sys_pipe2
+	.long sys_inotify_init1
 
 
 nr_syscalls=(.-sys_call_table)/4
diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c
index 21891c71d549..54be6afb5555 100644
--- a/arch/mn10300/kernel/gdb-stub.c
+++ b/arch/mn10300/kernel/gdb-stub.c
@@ -163,8 +163,6 @@ static char	input_buffer[BUFMAX];
 static char	output_buffer[BUFMAX];
 static char	trans_buffer[BUFMAX];
 
-static const char hexchars[] = "0123456789abcdef";
-
 struct gdbstub_bkpt {
 	u8	*addr;		/* address of breakpoint */
 	u8	len;		/* size of breakpoint */
@@ -363,8 +361,8 @@ static int putpacket(char *buffer)
 		}
 
 		gdbstub_io_tx_char('#');
-		gdbstub_io_tx_char(hexchars[checksum >> 4]);
-		gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+		gdbstub_io_tx_char(hex_asc_hi(checksum));
+		gdbstub_io_tx_char(hex_asc_lo(checksum));
 
 	} while (gdbstub_io_rx_char(&ch, 0),
 		 ch == '-' && (gdbstub_io("### GDB Rx NAK\n"), 0),
@@ -822,8 +820,7 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if ((u32) mem & 1 && count >= 1) {
 		if (gdbstub_read_byte(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 		mem++;
 		count--;
 	}
@@ -831,10 +828,8 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if ((u32) mem & 3 && count >= 2) {
 		if (gdbstub_read_word(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -842,14 +837,10 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	while (count >= 4) {
 		if (gdbstub_read_dword(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
-		*buf++ = hexchars[ch[2] >> 4];
-		*buf++ = hexchars[ch[2] & 0xf];
-		*buf++ = hexchars[ch[3] >> 4];
-		*buf++ = hexchars[ch[3] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
+		buf = pack_hex_byte(buf, ch[2]);
+		buf = pack_hex_byte(buf, ch[3]);
 		mem += 4;
 		count -= 4;
 	}
@@ -857,10 +848,8 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if (count >= 2) {
 		if (gdbstub_read_word(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
-		*buf++ = hexchars[ch[1] >> 4];
-		*buf++ = hexchars[ch[1] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
+		buf = pack_hex_byte(buf, ch[1]);
 		mem += 2;
 		count -= 2;
 	}
@@ -868,8 +857,7 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault)
 	if (count >= 1) {
 		if (gdbstub_read_byte(mem, ch) != 0)
 			return 0;
-		*buf++ = hexchars[ch[0] >> 4];
-		*buf++ = hexchars[ch[0] & 0xf];
+		buf = pack_hex_byte(buf, ch[0]);
 	}
 
 	*buf = 0;
@@ -1304,14 +1292,14 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 		*ptr++ = 'O';
 		ptr = mem2hex(title, ptr, sizeof(title) - 1, 0);
 
-		hx = hexchars[(excep & 0xf000) >> 12];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(excep & 0x0f00) >> 8];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(excep & 0x00f0) >> 4];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(excep & 0x000f)];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
+		hx = hex_asc_hi(excep >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(excep >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(excep);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(excep);
+		ptr = pack_hex_byte(ptr, hx);
 
 		ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
 		*ptr = 0;
@@ -1322,22 +1310,22 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 		*ptr++ = 'O';
 		ptr = mem2hex(tbcberr, ptr, sizeof(tbcberr) - 1, 0);
 
-		hx = hexchars[(bcberr & 0xf0000000) >> 28];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x0f000000) >> 24];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x00f00000) >> 20];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x000f0000) >> 16];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x0000f000) >> 12];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x00000f00) >> 8];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x000000f0) >> 4];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
-		hx = hexchars[(bcberr & 0x0000000f)];
-		*ptr++ = hexchars[hx >> 4];	*ptr++ = hexchars[hx & 0xf];
+		hx = hex_asc_hi(bcberr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr >> 24);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(bcberr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr >> 16);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(bcberr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr >> 8);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_hi(bcberr);
+		ptr = pack_hex_byte(ptr, hx);
+		hx = hex_asc_lo(bcberr);
+		ptr = pack_hex_byte(ptr, hx);
 
 		ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0);
 		*ptr = 0;
@@ -1353,14 +1341,12 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	 * Send trap type (converted to signal)
 	 */
 	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
+	ptr = pack_hex_byte(ptr, sigval);
 
 	/*
 	 * Send Error PC
 	 */
-	*ptr++ = hexchars[GDB_REGID_PC >> 4];
-	*ptr++ = hexchars[GDB_REGID_PC & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REGID_PC);
 	*ptr++ = ':';
 	ptr = mem2hex(&regs->pc, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1368,8 +1354,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	/*
 	 * Send frame pointer
 	 */
-	*ptr++ = hexchars[GDB_REGID_FP >> 4];
-	*ptr++ = hexchars[GDB_REGID_FP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REGID_FP);
 	*ptr++ = ':';
 	ptr = mem2hex(&regs->a3, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1378,8 +1363,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep)
 	 * Send stack pointer
 	 */
 	ssp = (unsigned long) (regs + 1);
-	*ptr++ = hexchars[GDB_REGID_SP >> 4];
-	*ptr++ = hexchars[GDB_REGID_SP & 0xf];
+	ptr = pack_hex_byte(ptr, GDB_REGID_SP);
 	*ptr++ = ':';
 	ptr = mem2hex(&ssp, ptr, 4, 0);
 	*ptr++ = ';';
@@ -1399,8 +1383,8 @@ packet_waiting:
 			/* request repeat of last signal number */
 		case '?':
 			output_buffer[0] = 'S';
-			output_buffer[1] = hexchars[sigval >> 4];
-			output_buffer[2] = hexchars[sigval & 0xf];
+			output_buffer[1] = hex_asc_hi(sigval);
+			output_buffer[2] = hex_asc_lo(sigval);
 			output_buffer[3] = 0;
 			break;
 
@@ -1838,8 +1822,8 @@ void gdbstub_exit(int status)
 
 	gdbstub_busy = 1;
 	output_buffer[0] = 'W';
-	output_buffer[1] = hexchars[(status >> 4) & 0x0F];
-	output_buffer[2] = hexchars[status & 0x0F];
+	output_buffer[1] = hex_asc_hi(status);
+	output_buffer[2] = hex_asc_lo(status);
 	output_buffer[3] = 0;
 
 	gdbstub_io_tx_char('$');
@@ -1853,8 +1837,8 @@ void gdbstub_exit(int status)
 	}
 
 	gdbstub_io_tx_char('#');
-	gdbstub_io_tx_char(hexchars[checksum >> 4]);
-	gdbstub_io_tx_char(hexchars[checksum & 0xf]);
+	gdbstub_io_tx_char(hex_asc_hi(checksum));
+	gdbstub_io_tx_char(hex_asc_lo(checksum));
 
 	/* make sure the output is flushed, or else RedBoot might clobber it */
 	gdbstub_io_tx_flush();
diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index b9c268c6b2fb..8b054e7a8ae8 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -392,7 +392,7 @@ static int mask_test_and_clear(volatile u8 *ptr, u8 mask)
 static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
 {
 	struct uart_icount *icount = &port->uart.icount;
-	struct tty_struct *tty = port->uart.info->tty;
+	struct tty_struct *tty = port->uart.info->port.tty;
 	unsigned ix;
 	int count;
 	u8 st, ch, push, status, overrun;
diff --git a/arch/mn10300/kernel/module.c b/arch/mn10300/kernel/module.c
index 0e4d2f6fa6e8..8fa36893df7a 100644
--- a/arch/mn10300/kernel/module.c
+++ b/arch/mn10300/kernel/module.c
@@ -24,6 +24,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/bug.h>
 
 #if 0
 #define DEBUGP printk
@@ -195,7 +196,7 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
 {
-	return 0;
+	return module_bug_finalize(hdr, sechdrs, me);
 }
 
 /*
@@ -203,4 +204,5 @@ int module_finalize(const Elf_Ehdr *hdr,
  */
 void module_arch_cleanup(struct module *mod)
 {
+	module_bug_cleanup(mod);
 }
diff --git a/arch/mn10300/mm/init.c b/arch/mn10300/mm/init.c
index 8c5d88c7b90a..8cee387a24fd 100644
--- a/arch/mn10300/mm/init.c
+++ b/arch/mn10300/mm/init.c
@@ -67,8 +67,8 @@ void __init paging_init(void)
 
 	/* declare the sizes of the RAM zones (only use the normal zone) */
 	zones_size[ZONE_NORMAL] =
-		(contig_page_data.bdata->node_low_pfn) -
-		(contig_page_data.bdata->node_boot_start >> PAGE_SHIFT);
+		contig_page_data.bdata->node_low_pfn -
+		contig_page_data.bdata->node_min_pfn;
 
 	/* pass the memory from the bootmem allocator to the main allocator */
 	free_area_init(zones_size);
@@ -87,7 +87,7 @@ void __init mem_init(void)
 	if (!mem_map)
 		BUG();
 
-#define START_PFN	(contig_page_data.bdata->node_boot_start >> PAGE_SHIFT)
+#define START_PFN	(contig_page_data.bdata->node_min_pfn)
 #define MAX_LOW_PFN	(contig_page_data.bdata->node_low_pfn)
 
 	max_mapnr = num_physpages = MAX_LOW_PFN - START_PFN;
diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c
index a477038752ba..baffc581e031 100644
--- a/arch/mn10300/mm/pgtable.c
+++ b/arch/mn10300/mm/pgtable.c
@@ -27,33 +27,6 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-void show_mem(void)
-{
-	unsigned long i;
-	int free = 0, total = 0, reserved = 0, shared = 0;
-
-	int cached = 0;
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map + i))
-			reserved++;
-		else if (PageSwapCache(mem_map + i))
-			cached++;
-		else if (!page_count(mem_map + i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d free pages\n", free);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /*
  * Associate a large virtual page frame with a given physical page frame
  * and protection flags for that frame. pfn is for the base of the page,
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index bc7a19da6245..a7d4fd353c2b 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -199,6 +199,7 @@ endchoice
 
 config SMP
 	bool "Symmetric multi-processing support"
+	select USE_GENERIC_SMP_HELPERS
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c
index 0c5b9dabb475..18072e03a019 100644
--- a/arch/parisc/hpux/sys_hpux.c
+++ b/arch/parisc/hpux/sys_hpux.c
@@ -210,19 +210,19 @@ static int vfs_statfs_hpux(struct dentry *dentry, struct hpux_statfs *buf)
 }
 
 /* hpux statfs */
-asmlinkage long hpux_statfs(const char __user *path,
+asmlinkage long hpux_statfs(const char __user *pathname,
 						struct hpux_statfs __user *buf)
 {
-	struct nameidata nd;
+	struct path path;
 	int error;
 
-	error = user_path_walk(path, &nd);
+	error = user_path(pathname, &path);
 	if (!error) {
 		struct hpux_statfs tmp;
-		error = vfs_statfs_hpux(nd.path.dentry, &tmp);
+		error = vfs_statfs_hpux(path.dentry, &tmp);
 		if (!error && copy_to_user(buf, &tmp, sizeof(tmp)))
 			error = -EFAULT;
-		path_put(&nd.path);
+		path_put(&path);
 	}
 	return error;
 }
@@ -448,7 +448,7 @@ int hpux_pipe(int *kstack_fildes)
 	int error;
 
 	lock_kernel();
-	error = do_pipe(kstack_fildes);
+	error = do_pipe_flags(kstack_fildes, 0);
 	unlock_kernel();
 	return error;
 }
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index e10d25d2d9c9..5259d8c20676 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -51,12 +51,12 @@ static struct pdc_btlb_info btlb_info __read_mostly;
 void
 flush_data_cache(void)
 {
-	on_each_cpu(flush_data_cache_local, NULL, 1, 1);
+	on_each_cpu(flush_data_cache_local, NULL, 1);
 }
 void 
 flush_instruction_cache(void)
 {
-	on_each_cpu(flush_instruction_cache_local, NULL, 1, 1);
+	on_each_cpu(flush_instruction_cache_local, NULL, 1);
 }
 #endif
 
@@ -515,7 +515,7 @@ static void cacheflush_h_tmp_function(void *dummy)
 
 void flush_cache_all(void)
 {
-	on_each_cpu(cacheflush_h_tmp_function, NULL, 1, 1);
+	on_each_cpu(cacheflush_h_tmp_function, NULL, 1);
 }
 
 void flush_cache_mm(struct mm_struct *mm)
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index 85fc7754ec25..d47f3975c9c6 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -84,19 +84,11 @@ EXPORT_SYMBOL(cpu_possible_map);
 
 DEFINE_PER_CPU(spinlock_t, ipi_lock) = SPIN_LOCK_UNLOCKED;
 
-struct smp_call_struct {
-	void (*func) (void *info);
-	void *info;
-	long wait;
-	atomic_t unstarted_count;
-	atomic_t unfinished_count;
-};
-static volatile struct smp_call_struct *smp_call_function_data;
-
 enum ipi_message_type {
 	IPI_NOP=0,
 	IPI_RESCHEDULE=1,
 	IPI_CALL_FUNC,
+	IPI_CALL_FUNC_SINGLE,
 	IPI_CPU_START,
 	IPI_CPU_STOP,
 	IPI_CPU_TEST
@@ -187,33 +179,12 @@ ipi_interrupt(int irq, void *dev_id)
 
 			case IPI_CALL_FUNC:
 				smp_debug(100, KERN_DEBUG "CPU%d IPI_CALL_FUNC\n", this_cpu);
-				{
-					volatile struct smp_call_struct *data;
-					void (*func)(void *info);
-					void *info;
-					int wait;
-
-					data = smp_call_function_data;
-					func = data->func;
-					info = data->info;
-					wait = data->wait;
-
-					mb();
-					atomic_dec ((atomic_t *)&data->unstarted_count);
-
-					/* At this point, *data can't
-					 * be relied upon.
-					 */
-
-					(*func)(info);
-
-					/* Notify the sending CPU that the
-					 * task is done.
-					 */
-					mb();
-					if (wait)
-						atomic_dec ((atomic_t *)&data->unfinished_count);
-				}
+				generic_smp_call_function_interrupt();
+				break;
+
+			case IPI_CALL_FUNC_SINGLE:
+				smp_debug(100, KERN_DEBUG "CPU%d IPI_CALL_FUNC_SINGLE\n", this_cpu);
+				generic_smp_call_function_single_interrupt();
 				break;
 
 			case IPI_CPU_START:
@@ -256,6 +227,14 @@ ipi_send(int cpu, enum ipi_message_type op)
 	spin_unlock_irqrestore(lock, flags);
 }
 
+static void
+send_IPI_mask(cpumask_t mask, enum ipi_message_type op)
+{
+	int cpu;
+
+	for_each_cpu_mask(cpu, mask)
+		ipi_send(cpu, op);
+}
 
 static inline void
 send_IPI_single(int dest_cpu, enum ipi_message_type op)
@@ -295,86 +274,15 @@ smp_send_all_nop(void)
 	send_IPI_allbutself(IPI_NOP);
 }
 
-
-/**
- * Run a function on all other CPUs.
- *  <func>	The function to run. This must be fast and non-blocking.
- *  <info>	An arbitrary pointer to pass to the function.
- *  <retry>	If true, keep retrying until ready.
- *  <wait>	If true, wait until function has completed on other CPUs.
- *  [RETURNS]   0 on success, else a negative status code.
- *
- * Does not return until remote CPUs are nearly ready to execute <func>
- * or have executed.
- */
-
-int
-smp_call_function (void (*func) (void *info), void *info, int retry, int wait)
+void arch_send_call_function_ipi(cpumask_t mask)
 {
-	struct smp_call_struct data;
-	unsigned long timeout;
-	static DEFINE_SPINLOCK(lock);
-	int retries = 0;
-
-	if (num_online_cpus() < 2)
-		return 0;
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	/* can also deadlock if IPIs are disabled */
-	WARN_ON((get_eiem() & (1UL<<(CPU_IRQ_MAX - IPI_IRQ))) == 0);
-
-	
-	data.func = func;
-	data.info = info;
-	data.wait = wait;
-	atomic_set(&data.unstarted_count, num_online_cpus() - 1);
-	atomic_set(&data.unfinished_count, num_online_cpus() - 1);
-
-	if (retry) {
-		spin_lock (&lock);
-		while (smp_call_function_data != 0)
-			barrier();
-	}
-	else {
-		spin_lock (&lock);
-		if (smp_call_function_data) {
-			spin_unlock (&lock);
-			return -EBUSY;
-		}
-	}
-
-	smp_call_function_data = &data;
-	spin_unlock (&lock);
-	
-	/*  Send a message to all other CPUs and wait for them to respond  */
-	send_IPI_allbutself(IPI_CALL_FUNC);
-
- retry:
-	/*  Wait for response  */
-	timeout = jiffies + HZ;
-	while ( (atomic_read (&data.unstarted_count) > 0) &&
-		time_before (jiffies, timeout) )
-		barrier ();
-
-	if (atomic_read (&data.unstarted_count) > 0) {
-		printk(KERN_CRIT "SMP CALL FUNCTION TIMED OUT! (cpu=%d), try %d\n",
-		      smp_processor_id(), ++retries);
-		goto retry;
-	}
-	/* We either got one or timed out. Release the lock */
-
-	mb();
-	smp_call_function_data = NULL;
-
-	while (wait && atomic_read (&data.unfinished_count) > 0)
-			barrier ();
-
-	return 0;
+	send_IPI_mask(mask, IPI_CALL_FUNC);
 }
 
-EXPORT_SYMBOL(smp_call_function);
+void arch_send_call_function_single_ipi(int cpu)
+{
+	send_IPI_single(cpu, IPI_CALL_FUNC_SINGLE);
+}
 
 /*
  * Flush all other CPU's tlb and then mine.  Do this with on_each_cpu()
@@ -384,7 +292,7 @@ EXPORT_SYMBOL(smp_call_function);
 void
 smp_flush_tlb_all(void)
 {
-	on_each_cpu(flush_tlb_all_local, NULL, 1, 1);
+	on_each_cpu(flush_tlb_all_local, NULL, 1);
 }
 
 /*
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index ce0da689a89d..7c155c254e72 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -36,7 +36,6 @@ extern int  data_start;
 
 #ifdef CONFIG_DISCONTIGMEM
 struct node_map_data node_data[MAX_NUMNODES] __read_mostly;
-bootmem_data_t bmem_data[MAX_NUMNODES] __read_mostly;
 unsigned char pfnnid_map[PFNNID_MAP_MAX] __read_mostly;
 #endif
 
@@ -262,7 +261,7 @@ static void __init setup_bootmem(void)
 #ifdef CONFIG_DISCONTIGMEM
 	for (i = 0; i < MAX_PHYSMEM_RANGES; i++) {
 		memset(NODE_DATA(i), 0, sizeof(pg_data_t));
-		NODE_DATA(i)->bdata = &bmem_data[i];
+		NODE_DATA(i)->bdata = &bootmem_node_data[i];
 	}
 	memset(pfnnid_map, 0xff, sizeof(pfnnid_map));
 
@@ -888,7 +887,7 @@ void __init paging_init(void)
 		}
 #endif
 
-		free_area_init_node(i, NODE_DATA(i), zones_size,
+		free_area_init_node(i, zones_size,
 				pmem_ranges[i].start_pfn, NULL);
 	}
 }
@@ -1053,7 +1052,7 @@ void flush_tlb_all(void)
 	    do_recycle++;
 	}
 	spin_unlock(&sid_lock);
-	on_each_cpu(flush_tlb_all_local, NULL, 1, 1);
+	on_each_cpu(flush_tlb_all_local, NULL, 1);
 	if (do_recycle) {
 	    spin_lock(&sid_lock);
 	    recycle_sids(recycle_ndirty,recycle_dirty_array);
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a5e9912e2d37..63c9cafda9c4 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -42,6 +42,9 @@ config GENERIC_HARDIRQS
 	bool
 	default y
 
+config HAVE_GET_USER_PAGES_FAST
+	def_bool PPC64
+
 config HAVE_SETUP_PER_CPU_AREA
 	def_bool PPC64
 
@@ -53,6 +56,9 @@ config STACKTRACE_SUPPORT
 	bool
 	default y
 
+config HAVE_LATENCYTOP_SUPPORT
+	def_bool y
+
 config TRACE_IRQFLAGS_SUPPORT
 	bool
 	depends on PPC64
@@ -107,10 +113,17 @@ config PPC
 	default y
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_IDE
+	select HAVE_IOREMAP_PROT
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select HAVE_KPROBES
+	select HAVE_ARCH_KGDB
 	select HAVE_KRETPROBES
+	select HAVE_ARCH_TRACEHOOK
 	select HAVE_LMB
+	select HAVE_DMA_ATTRS if PPC64
+	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_OPROFILE
 
 config EARLY_PRINTK
@@ -194,7 +207,7 @@ config ARCH_HIBERNATION_POSSIBLE
 
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
-	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200
+	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx
 
 config PPC_DCR_NATIVE
 	bool
@@ -310,8 +323,8 @@ config KEXEC
 	  strongly in flux, so no good recommendation can be made.
 
 config CRASH_DUMP
-	bool "Build a kdump crash kernel (EXPERIMENTAL)"
-	depends on PPC_MULTIPLATFORM && PPC64 && EXPERIMENTAL
+	bool "Build a kdump crash kernel"
+	depends on PPC_MULTIPLATFORM && PPC64
 	help
 	  Build a kernel suitable for use as a kdump capture kernel.
 	  The kernel will be linked at a different address than normal, and
@@ -460,6 +473,19 @@ config CMDLINE
 	  some command-line options at build time by entering them here.  In
 	  most cases you will need to specify the root device here.
 
+config EXTRA_TARGETS
+	string "Additional default image types"
+	help
+	  List additional targets to be built by the bootwrapper here (separated
+	  by spaces).  This is useful for targets that depend of device tree
+	  files in the .dts directory.
+
+	  Targets in this list will be build as part of the default build
+	  target, or when the user does a 'make zImage' or a
+	  'make zImage.initrd'.
+
+	  If unsure, leave blank
+
 if !44x || BROKEN
 config ARCH_WANTS_FREEZER_CONTROL
 	def_bool y
@@ -540,15 +566,25 @@ config FSL_LBC
 	help
 	  Freescale Localbus support
 
+config FSL_GTM
+	bool
+	depends on PPC_83xx || QUICC_ENGINE || CPM2
+	help
+	  Freescale General-purpose Timers support
+
 # Yes MCA RS/6000s exist but Linux-PPC does not currently support any
 config MCA
 	bool
 
+# Platforms that what PCI turned unconditionally just do select PCI
+# in their config node.  Platforms that want to choose at config
+# time should select PPC_PCI_CHOICE
+config PPC_PCI_CHOICE
+	bool
+
 config PCI
-	bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \
-		|| PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \
-		|| PPC_PS3 || 44x
-	default y if !40x && !CPM2 && !8xx && !PPC_MPC512x && !PPC_83xx \
+	bool "PCI support" if PPC_PCI_CHOICE
+	default y if !40x && !CPM2 && !8xx && !PPC_83xx \
 		&& !PPC_85xx && !PPC_86xx
 	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx
 	default PCI_QSPAN if !4xx && !CPM2 && 8xx
@@ -814,6 +850,7 @@ source "crypto/Kconfig"
 config PPC_CLOCK
 	bool
 	default n
+	select HAVE_CLK
 
 config PPC_LIB_RHEAP
 	bool
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index a7d24e692bab..4ebc52a19f0a 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -41,52 +41,19 @@ config HCALL_STATS
 	  This option will add a small amount of overhead to all hypervisor
 	  calls.
 
-config DEBUGGER
-	bool "Enable debugger hooks"
+config CODE_PATCHING_SELFTEST
+	bool "Run self-tests of the code-patching code."
 	depends on DEBUG_KERNEL
-	help
-	  Include in-kernel hooks for kernel debuggers. Unless you are
-	  intending to debug the kernel, say N here.
-
-config KGDB
-	bool "Include kgdb kernel debugger"
-	depends on DEBUGGER && (BROKEN || PPC_GEN550 || 4xx)
-	select DEBUG_INFO
-	help
-	  Include in-kernel hooks for kgdb, the Linux kernel source level
-	  debugger.  See <http://kgdb.sourceforge.net/> for more information.
-	  Unless you are intending to debug the kernel, say N here.
-
-choice
-	prompt "Serial Port"
-	depends on KGDB
-	default KGDB_TTYS1
-
-config KGDB_TTYS0
-	bool "ttyS0"
-
-config KGDB_TTYS1
-	bool "ttyS1"
-
-config KGDB_TTYS2
-	bool "ttyS2"
+	default n
 
-config KGDB_TTYS3
-	bool "ttyS3"
-
-endchoice
-
-config KGDB_CONSOLE
-	bool "Enable serial console thru kgdb port"
-	depends on KGDB && 8xx || CPM2
-	help
-	  If you enable this, all serial console messages will be sent
-	  over the gdb stub.
-	  If unsure, say N.
+config FTR_FIXUP_SELFTEST
+	bool "Run self-tests of the feature-fixup code."
+	depends on DEBUG_KERNEL
+	default n
 
 config XMON
 	bool "Include xmon kernel debugger"
-	depends on DEBUGGER
+	depends on DEBUG_KERNEL
 	help
 	  Include in-kernel hooks for the xmon kernel monitor/debugger.
 	  Unless you are intending to debug the kernel, say N here.
@@ -116,6 +83,11 @@ config XMON_DISASSEMBLY
 	  to say Y here, unless you're building for a memory-constrained
 	  system.
 
+config DEBUGGER
+	bool
+	depends on KGDB || XMON
+	default y
+
 config IRQSTACKS
 	bool "Use separate kernel stacks when processing interrupts"
 	help
@@ -125,7 +97,7 @@ config IRQSTACKS
 
 config VIRQ_DEBUG
 	bool "Expose hardware/virtual IRQ mapping via debugfs"
-	depends on DEBUG_FS && PPC_MERGE
+	depends on DEBUG_FS
 	help
 	  This option will show the mapping relationship between hardware irq
 	  numbers and virtual irq numbers. The mapping is exposed via debugfs
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index b7d4c4ce2fe6..9155c9312c1e 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -18,22 +18,16 @@ HAS_BIARCH	:= $(call cc-option-yn, -m32)
 CROSS32_COMPILE ?=
 
 CROSS32CC		:= $(CROSS32_COMPILE)gcc
-CROSS32AS		:= $(CROSS32_COMPILE)as
-CROSS32LD		:= $(CROSS32_COMPILE)ld
 CROSS32AR		:= $(CROSS32_COMPILE)ar
-CROSS32OBJCOPY		:= $(CROSS32_COMPILE)objcopy
 
 ifeq ($(HAS_BIARCH),y)
 ifeq ($(CROSS32_COMPILE),)
 CROSS32CC	:= $(CC) -m32
-CROSS32AS	:= $(AS) -a32
-CROSS32LD	:= $(LD) -m elf32ppc
-CROSS32OBJCOPY	:= $(OBJCOPY)
 CROSS32AR	:= GNUTARGET=elf32-powerpc $(AR)
 endif
 endif
 
-export CROSS32CC CROSS32AS CROSS32LD CROSS32AR CROSS32OBJCOPY
+export CROSS32CC CROSS32AR
 
 ifeq ($(CROSS_COMPILE),)
 KBUILD_DEFCONFIG := $(shell uname -m)_defconfig
@@ -169,12 +163,25 @@ bootwrapper_install %.dtb:
 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
 define archhelp
-  @echo '* zImage          - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
+  @echo '* zImage          - Build default images selected by kernel config'
+  @echo '  zImage.*        - Compressed kernel image (arch/$(ARCH)/boot/zImage.*)'
+  @echo '  uImage          - U-Boot native image format'
+  @echo '  cuImage.<dt>    - Backwards compatible U-Boot image for older'
+  @echo '                    versions which do not support device trees'
+  @echo '  dtbImage.<dt>   - zImage with an embedded device tree blob'
+  @echo '  simpleImage.<dt> - Firmware independent image.'
+  @echo '  treeImage.<dt>  - Support for older IBM 4xx firmware (not U-Boot)'
   @echo '  install         - Install kernel using'
   @echo '                    (your) ~/bin/installkernel or'
   @echo '                    (distribution) /sbin/installkernel or'
   @echo '                    install to $$(INSTALL_PATH) and run lilo'
   @echo '  *_defconfig     - Select default config from arch/$(ARCH)/configs'
+  @echo ''
+  @echo '  Targets with <dt> embed a device tree blob inside the image'
+  @echo '  These targets support board with firmware that does not'
+  @echo '  support passing a device tree directly.  Replace <dt> with the'
+  @echo '  name of a dts file from the arch/$(ARCH)/boot/dts/ directory'
+  @echo '  (minus the .dts extension).'
 endef
 
 install:
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 095e04db1c0e..14174aa24074 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -35,6 +35,8 @@ endif
 
 BOOTCFLAGS	+= -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt
 
+DTS_FLAGS	?= -p 1024
+
 $(obj)/4xx.o: BOOTCFLAGS += -mcpu=405
 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=405
 $(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405
@@ -63,10 +65,10 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
 		ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
 		cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
 		cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
-		fixed-head.S ep88xc.c ep405.c \
+		fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \
 		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
-		virtex405-head.S
+		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -161,12 +163,12 @@ quiet_cmd_flex = FLEX    $@
       cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
 
 $(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE
-     $(call if_changed,bison)
+	$(call if_changed,bison)
 
 $(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c
 
 $(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE
-     $(call if_changed,flex)
+	$(call if_changed,flex)
 endif
 
 #############
@@ -213,6 +215,7 @@ image-$(CONFIG_WALNUT)			+= treeImage.walnut
 # Board ports in arch/powerpc/platform/44x/Kconfig
 image-$(CONFIG_EBONY)			+= treeImage.ebony cuImage.ebony
 image-$(CONFIG_BAMBOO)			+= treeImage.bamboo cuImage.bamboo
+image-$(CONFIG_SAM440EP)		+= cuImage.sam440ep
 image-$(CONFIG_SEQUOIA)			+= cuImage.sequoia
 image-$(CONFIG_RAINIER)			+= cuImage.rainier
 image-$(CONFIG_TAISHAN)			+= cuImage.taishan
@@ -242,6 +245,7 @@ image-$(CONFIG_MPC834x_ITX)		+= cuImage.mpc8349emitx \
 					   cuImage.mpc8349emitxgp
 image-$(CONFIG_MPC834x_MDS)		+= cuImage.mpc834x_mds
 image-$(CONFIG_MPC836x_MDS)		+= cuImage.mpc836x_mds
+image-$(CONFIG_ASP834x)			+= dtbImage.asp834x-redboot
 
 # Board ports in arch/powerpc/platform/85xx/Kconfig
 image-$(CONFIG_MPC8540_ADS)		+= cuImage.mpc8540ads
@@ -254,6 +258,7 @@ image-$(CONFIG_MPC85xx_DS)		+= cuImage.mpc8544ds \
 					   cuImage.mpc8572ds
 image-$(CONFIG_TQM8540)			+= cuImage.tqm8540
 image-$(CONFIG_TQM8541)			+= cuImage.tqm8541
+image-$(CONFIG_TQM8548)			+= cuImage.tqm8548
 image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
 image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
 image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
@@ -263,6 +268,7 @@ image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
 image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
 image-$(CONFIG_MPC7448HPC2)		+= cuImage.mpc7448hpc2
+image-$(CONFIG_PPC_C2K)			+= cuImage.c2k
 
 # For 32-bit powermacs, build the COFF and miboot images
 # as well as the ELF images.
@@ -270,6 +276,9 @@ ifeq ($(CONFIG_PPC32),y)
 image-$(CONFIG_PPC_PMAC)	+= zImage.coff zImage.miboot
 endif
 
+# Allow extra targets to be added to the defconfig
+image-y	+= $(subst ",,$(CONFIG_EXTRA_TARGETS))
+
 initrd-  := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-))
 initrd-y := $(patsubst zImage%, zImage.initrd%, \
 		$(patsubst dtbImage%, dtbImage.initrd%, \
diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c
index 8041a9845ab7..b1e5611b2ab1 100644
--- a/arch/powerpc/boot/addnote.c
+++ b/arch/powerpc/boot/addnote.c
@@ -25,7 +25,7 @@ char arch[] = "PowerPC";
 #define N_DESCR	6
 unsigned int descr[N_DESCR] = {
 	0xffffffff,		/* real-mode = true */
-	0x00c00000,		/* real-base, i.e. where we expect OF to be */
+	0x02000000,		/* real-base, i.e. where we expect OF to be */
 	0xffffffff,		/* real-size */
 	0xffffffff,		/* virt-base */
 	0xffffffff,		/* virt-size */
diff --git a/arch/powerpc/boot/cuboot-c2k.c b/arch/powerpc/boot/cuboot-c2k.c
new file mode 100644
index 000000000000..e43594950ba3
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-c2k.c
@@ -0,0 +1,190 @@
+/*
+ * GEFanuc C2K platform code.
+ *
+ * Author: Remi Machet <rmachet@slac.stanford.edu>
+ *
+ * Originated from prpmc2800.c
+ *
+ * 2008 (c) Stanford University
+ * 2007 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "types.h"
+#include "stdio.h"
+#include "io.h"
+#include "ops.h"
+#include "elf.h"
+#include "gunzip_util.h"
+#include "mv64x60.h"
+#include "cuboot.h"
+#include "ppcboot.h"
+
+static u8 *bridge_base;
+
+static void c2k_bridge_setup(u32 mem_size)
+{
+	u32 i, v[30], enables, acc_bits;
+	u32 pci_base_hi, pci_base_lo, size, buf[2];
+	unsigned long cpu_base;
+	int rc;
+	void *devp, *mv64x60_devp;
+	u8 *bridge_pbase, is_coherent;
+	struct mv64x60_cpu2pci_win *tbl;
+	int bus;
+
+	bridge_pbase = mv64x60_get_bridge_pbase();
+	is_coherent = mv64x60_is_coherent();
+
+	if (is_coherent)
+		acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_WB
+			| MV64x60_PCI_ACC_CNTL_SWAP_NONE
+			| MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES
+			| MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES;
+	else
+		acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_NONE
+			| MV64x60_PCI_ACC_CNTL_SWAP_NONE
+			| MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES
+			| MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES;
+
+	mv64x60_config_ctlr_windows(bridge_base, bridge_pbase, is_coherent);
+	mv64x60_devp = find_node_by_compatible(NULL, "marvell,mv64360");
+	if (mv64x60_devp == NULL)
+		fatal("Error: Missing marvell,mv64360 device tree node\n\r");
+
+	enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE));
+	enables |= 0x007ffe00; /* Disable all cpu->pci windows */
+	out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables);
+
+	/* Get the cpu -> pci i/o & mem mappings from the device tree */
+	devp = NULL;
+	for (bus = 0; ; bus++) {
+		char name[] = "pci ";
+
+		name[strlen(name)-1] = bus+'0';
+
+		devp = find_node_by_alias(name);
+		if (devp == NULL)
+			break;
+
+		if (bus >= 2)
+			fatal("Error: Only 2 PCI controllers are supported at" \
+				" this time.\n");
+
+		mv64x60_config_pci_windows(bridge_base, bridge_pbase, bus, 0,
+				mem_size, acc_bits);
+
+		rc = getprop(devp, "ranges", v, sizeof(v));
+		if (rc == 0)
+			fatal("Error: Can't find marvell,mv64360-pci ranges"
+				" property\n\r");
+
+		/* Get the cpu -> pci i/o & mem mappings from the device tree */
+
+		for (i = 0; i < rc; i += 6) {
+			switch (v[i] & 0xff000000) {
+			case 0x01000000: /* PCI I/O Space */
+				tbl = mv64x60_cpu2pci_io;
+				break;
+			case 0x02000000: /* PCI MEM Space */
+				tbl = mv64x60_cpu2pci_mem;
+				break;
+			default:
+				continue;
+			}
+
+			pci_base_hi = v[i+1];
+			pci_base_lo = v[i+2];
+			cpu_base = v[i+3];
+			size = v[i+5];
+
+			buf[0] = cpu_base;
+			buf[1] = size;
+
+			if (!dt_xlate_addr(devp, buf, sizeof(buf), &cpu_base))
+				fatal("Error: Can't translate PCI address " \
+						"0x%x\n\r", (u32)cpu_base);
+
+			mv64x60_config_cpu2pci_window(bridge_base, bus,
+				pci_base_hi, pci_base_lo, cpu_base, size, tbl);
+		}
+
+		enables &= ~(3<<(9+bus*5)); /* Enable cpu->pci<bus> i/o,
+						cpu->pci<bus> mem0 */
+		out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE),
+			enables);
+	};
+}
+
+static void c2k_fixups(void)
+{
+	u32 mem_size;
+
+	mem_size = mv64x60_get_mem_size(bridge_base);
+	c2k_bridge_setup(mem_size); /* Do necessary bridge setup */
+}
+
+#define MV64x60_MPP_CNTL_0	0xf000
+#define MV64x60_MPP_CNTL_2	0xf008
+#define MV64x60_GPP_IO_CNTL	0xf100
+#define MV64x60_GPP_LEVEL_CNTL	0xf110
+#define MV64x60_GPP_VALUE_SET	0xf118
+
+static void c2k_reset(void)
+{
+	u32 temp;
+
+	udelay(5000000);
+
+	if (bridge_base != 0) {
+		temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0));
+		temp &= 0xFFFF0FFF;
+		out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
+		temp |= 0x00000004;
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
+		temp |= 0x00000004;
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2));
+		temp &= 0xFFFF0FFF;
+		out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
+		temp |= 0x00080000;
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
+
+		temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
+		temp |= 0x00080000;
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
+
+		out_le32((u32 *)(bridge_base + MV64x60_GPP_VALUE_SET),
+				0x00080004);
+	}
+
+	for (;;);
+}
+
+static bd_t bd;
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+			unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+
+	fdt_init(_dtb_start);
+
+	bridge_base = mv64x60_get_bridge_base();
+
+	platform_ops.fixups = c2k_fixups;
+	platform_ops.exit = c2k_reset;
+
+	if (serial_console_init() < 0)
+		exit();
+}
diff --git a/arch/powerpc/boot/cuboot-sam440ep.c b/arch/powerpc/boot/cuboot-sam440ep.c
new file mode 100644
index 000000000000..ec10a47460dd
--- /dev/null
+++ b/arch/powerpc/boot/cuboot-sam440ep.c
@@ -0,0 +1,49 @@
+/*
+ * Old U-boot compatibility for Sam440ep based off bamboo.c code
+ * original copyrights below
+ *
+ * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Copyright 2007 IBM Corporation
+ *
+ * Based on cuboot-ebony.c
+ *
+ * Modified from cuboot-bamboo.c for sam440ep:
+ * Copyright 2008 Giuseppe Coviello <gicoviello@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "44x.h"
+#include "4xx.h"
+#include "cuboot.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+static bd_t bd;
+
+static void sam440ep_fixups(void)
+{
+       unsigned long sysclk = 66666666;
+
+       ibm440ep_fixup_clocks(sysclk, 11059200, 25000000);
+       ibm4xx_sdram_fixup_memsize();
+       ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00);
+       dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		unsigned long r6, unsigned long r7)
+{
+	CUBOOT_INIT();
+	platform_ops.fixups = sam440ep_fixups;
+	platform_ops.exit = ibm44x_dbcr_reset;
+	fdt_init(_dtb_start);
+	serial_console_init();
+}
diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c
index eb108a877492..21780210057d 100644
--- a/arch/powerpc/boot/cuboot-warp.c
+++ b/arch/powerpc/boot/cuboot-warp.c
@@ -10,6 +10,7 @@
 #include "ops.h"
 #include "4xx.h"
 #include "cuboot.h"
+#include "stdio.h"
 
 #define TARGET_4xx
 #define TARGET_44x
@@ -17,14 +18,54 @@
 
 static bd_t bd;
 
-static void warp_fixups(void)
+static void warp_fixup_one_nor(u32 from, u32 to)
 {
-	unsigned long sysclk = 66000000;
+	void *devp;
+	char name[50];
+	u32 v[2];
+
+	sprintf(name, "/plb/opb/ebc/nor_flash@0,0/partition@%x", from);
+
+	devp = finddevice(name);
+	if (!devp)
+		return;
+
+	if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) {
+		v[0] = to;
+		setprop(devp, "reg", v, sizeof(v));
+
+		printf("NOR 64M fixup %x -> %x\r\n", from, to);
+	}
+}
+
 
-	ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+static void warp_fixups(void)
+{
+	ibm440ep_fixup_clocks(66000000, 11059200, 50000000);
 	ibm4xx_sdram_fixup_memsize();
 	ibm4xx_fixup_ebc_ranges("/plb/opb/ebc");
 	dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr);
+
+	/* Fixup for 64M flash on Rev A boards. */
+	if (bd.bi_flashsize == 0x4000000) {
+		void *devp;
+		u32 v[3];
+
+		devp = finddevice("/plb/opb/ebc/nor_flash@0,0");
+		if (!devp)
+			return;
+
+		/* Fixup the size */
+		if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) {
+			v[2] = bd.bi_flashsize;
+			setprop(devp, "reg", v, sizeof(v));
+		}
+
+		/* Fixup parition offsets */
+		warp_fixup_one_nor(0x300000, 0x3f00000);
+		warp_fixup_one_nor(0x340000, 0x3f40000);
+		warp_fixup_one_nor(0x380000, 0x3f80000);
+	}
 }
 
 
diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
new file mode 100644
index 000000000000..8b1bb0e41905
--- /dev/null
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -0,0 +1,282 @@
+/*
+ * Analogue & Micro ASP8347 Device Tree Source
+ *
+ * Copyright 2008 Codehermit
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "Analogue & Micro ASP8347E";
+	compatible = "analogue-and-micro,asp8347e";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8347@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;	// 128MB at 0
+	};
+
+	localbus@ff005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8347e-localbus",
+			     "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xff005000 0x1000>;
+		interrupts = <77 0x8>;
+		interrupt-parent = <&ipic>;
+
+		ranges = <
+			0 0 0xf0000000 0x02000000
+		>;
+
+		flash@0,0 {
+			compatible = "cfi-flash";
+			reg = <0 0 0x02000000>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+	};
+
+	soc8349@ff000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xff000000 0x00100000>;
+		reg = <0xff000000 0x00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <15 0x8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x7000 0x1000>;
+			interrupts = <16 0x8>;
+			interrupt-parent = <&ipic>;
+			mode = "cpu";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8347-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		/* phy type (ULPI or SERIAL) are only types supported for MPH */
+		/* port = 0 or 1 */
+		usb@22000 {
+			compatible = "fsl-usb2-mph";
+			reg = <0x22000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <39 0x8>;
+			phy_type = "ulpi";
+			port1;
+		};
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			compatible = "fsl-usb2-dr";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&ipic>;
+			interrupts = <38 0x8>;
+			dr_mode = "otg";
+			phy_type = "ulpi";
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&ipic>;
+				interrupts = <17 0x8>;
+				reg = <0x1>;
+				device_type = "ethernet-phy";
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&ipic>;
+				interrupts = <18 0x8>;
+				reg = <0x2>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 08 e5 11 32 33 ];
+			interrupts = <32 0x8 33 0x8 34 0x8>;
+			interrupt-parent = <&ipic>;
+			phy-handle = <&phy0>;
+			linux,network-index = <0>;
+		};
+
+		enet1: ethernet@25000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			local-mac-address = [ 00 08 e5 11 32 34 ];
+			interrupts = <35 0x8 36 0x8 37 0x8>;
+			interrupt-parent = <&ipic>;
+			phy-handle = <&phy1>;
+			linux,network-index = <1>;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <400000000>;
+			interrupts = <9 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <400000000>;
+			interrupts = <10 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		/* May need to remove if on a part without crypto engine */
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			num-channels = <4>;
+			channel-fifo-len = <24>;
+			exec-units-mask = <0x0000007e>;
+			/* desc mask is for rev2.0,
+			 * we need runtime fixup for >2.0 */
+			descriptor-types-mask = <0x01010ebf>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		ipic: pic@700 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x700 0x100>;
+			device_type = "ipic";
+		};
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2";
+		linux,stdout-path = &serial0;
+	};
+
+};
diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts
index ba2521bdaab1..6ce0cc2c0208 100644
--- a/arch/powerpc/boot/dts/bamboo.dts
+++ b/arch/powerpc/boot/dts/bamboo.dts
@@ -11,12 +11,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,bamboo";
 	compatible = "amcc,bamboo";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -34,13 +36,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440EP";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -48,14 +50,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -65,22 +67,22 @@
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -92,29 +94,29 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
 		};
 
 		POB0: opb {
@@ -124,101 +126,101 @@
 			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
 			 * bits.
 			 */
-		  	ranges = <00000000 0 00000000 80000000
-			          80000000 0 80000000 80000000>;
+		  	ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
 		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <7 4>;
+		  	interrupts = <0x7 0x4>;
 		  	clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 			};
 
 			UART0: serial@ef600300 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600300 8>;
-		   		virtual-reg = <ef600300>;
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
 		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <1c200>;
+		   		current-speed = <115200>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
+		   		interrupts = <0x0 0x4>;
 	   		};
 
 			UART1: serial@ef600400 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600400 8>;
-		   		virtual-reg = <ef600400>;
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <1 4>;
+		   		interrupts = <0x1 0x4>;
 	   		};
 
 			UART2: serial@ef600500 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600500 8>;
-		   		virtual-reg = <ef600500>;
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <3 4>;
+		   		interrupts = <0x3 0x4>;
 	   		};
 
 			UART3: serial@ef600600 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600600 8>;
-		   		virtual-reg = <ef600600>;
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <4 4>;
+		   		interrupts = <0x4 0x4>;
 	   		};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <ef600e00 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0 1>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
@@ -227,26 +229,26 @@
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4 1f 4>;
-				reg = <ef600f00 70>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0xef600f00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2 3>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 			};
 
 			usb@ef601000 {
 				compatible = "ohci-be";
-				reg = <ef601000 80>;
-				interrupts = <8 1 9 1>;
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x1 0x9 0x1>;
 				interrupt-parent = < &UIC1 >;
 			};
 		};
@@ -258,35 +260,35 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
 			primary;
-			reg = <0 eec00000 8	/* Config space access */
-			       0 eed00000 4	/* IACK */
-			       0 eed00000 4	/* Special cycle */
-			       0 ef400000 40>;	/* Internal registers */
+			reg = <0x00000000 0xeec00000 0x00000008	/* Config space access */
+			       0x00000000 0xeed00000 0x00000004	/* IACK */
+			       0x00000000 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000000 0xef400000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 a0000000 0 a0000000 0 20000000
-				  01000000 0 00000000 0 e8000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* Bamboo has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 0 &UIC0 1c 8
+				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 0 &UIC0 1b 8
+				0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8
 
 				/* IDSEL 3 */
-				1800 0 0 0 &UIC0 1a 8
+				0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8
 
 				/* IDSEL 4 */
-				2000 0 0 0 &UIC0 19 8
+				0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/c2k.dts b/arch/powerpc/boot/dts/c2k.dts
new file mode 100644
index 000000000000..f5d625fa3e52
--- /dev/null
+++ b/arch/powerpc/boot/dts/c2k.dts
@@ -0,0 +1,371 @@
+/* Device Tree Source for GEFanuc C2K
+ *
+ * Author: Remi Machet <rmachet@slac.stanford.edu>
+ *
+ * Originated from prpmc2800.dts
+ *
+ * 2008 (c) Stanford University
+ * 2007 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "C2K";
+	compatible = "GEFanuc,C2K";
+	coherency-off;
+
+	aliases {
+		pci0 = &PCI0;
+		pci1 = &PCI1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "PowerPC,7447";
+			reg = <0>;
+			clock-frequency = <996000000>;	/* 996 MHz */
+			bus-frequency = <166666667>;	/* 166.6666 MHz */
+			timebase-frequency = <41666667>;	/* 166.6666/4 MHz */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>;	/* 1GB */
+	};
+
+	system-controller@d8000000 { /* Marvell Discovery */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		model = "mv64460";
+		compatible = "marvell,mv64360";
+		clock-frequency = <166666667>;		/* 166.66... MHz */
+		reg = <0xd8000000 0x00010000>;
+		virtual-reg = <0xd8000000>;
+		ranges = <0xd4000000 0xd4000000 0x01000000	/* PCI 0 I/O Space */
+			  0x80000000 0x80000000 0x08000000	/* PCI 0 MEM Space */
+			  0xd0000000 0xd0000000 0x01000000	/* PCI 1 I/O Space */
+			  0xa0000000 0xa0000000 0x08000000	/* PCI 1 MEM Space */
+			  0xd8100000 0xd8100000 0x00010000	/* FPGA */
+			  0xd8110000 0xd8110000 0x00010000	/* FPGA USARTs */
+			  0xf8000000 0xf8000000 0x08000000	/* User FLASH */
+			  0x00000000 0xd8000000 0x00010000	/* Bridge's regs */
+			  0xd8140000 0xd8140000 0x00040000>;	/* Integrated SRAM */
+
+		mdio@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,mv64360-mdio";
+			reg = <0x2000 4>;
+			PHY0: ethernet-phy@0 {
+				device_type = "ethernet-phy";
+				interrupts = <76>;	/* GPP 12 */
+				interrupt-parent = <&PIC>;
+				reg = <0>;
+			};
+			PHY1: ethernet-phy@1 {
+				device_type = "ethernet-phy";
+				interrupts = <76>;	/* GPP 12 */
+				interrupt-parent = <&PIC>;
+				reg = <1>;
+			};
+			PHY2: ethernet-phy@2 {
+				device_type = "ethernet-phy";
+				interrupts = <76>;	/* GPP 12 */
+				interrupt-parent = <&PIC>;
+				reg = <2>;
+			};
+		};
+
+		ethernet-group@2000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "marvell,mv64360-eth-group";
+			reg = <0x2000 0x2000>;
+			ethernet@0 {
+				device_type = "network";
+				compatible = "marvell,mv64360-eth";
+				reg = <0>;
+				interrupts = <32>;
+				interrupt-parent = <&PIC>;
+				phy = <&PHY0>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+			ethernet@1 {
+				device_type = "network";
+				compatible = "marvell,mv64360-eth";
+				reg = <1>;
+				interrupts = <33>;
+				interrupt-parent = <&PIC>;
+				phy = <&PHY1>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+			ethernet@2 {
+				device_type = "network";
+				compatible = "marvell,mv64360-eth";
+				reg = <2>;
+				interrupts = <34>;
+				interrupt-parent = <&PIC>;
+				phy = <&PHY2>;
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+		};
+
+		SDMA0: sdma@4000 {
+			compatible = "marvell,mv64360-sdma";
+			reg = <0x4000 0xc18>;
+			virtual-reg = <0xd8004000>;
+			interrupt-base = <0>;
+			interrupts = <36>;
+			interrupt-parent = <&PIC>;
+		};
+
+		SDMA1: sdma@6000 {
+			compatible = "marvell,mv64360-sdma";
+			reg = <0x6000 0xc18>;
+			virtual-reg = <0xd8006000>;
+			interrupt-base = <0>;
+			interrupts = <38>;
+			interrupt-parent = <&PIC>;
+		};
+
+		BRG0: brg@b200 {
+			compatible = "marvell,mv64360-brg";
+			reg = <0xb200 0x8>;
+			clock-src = <8>;
+			clock-frequency = <133333333>;
+			current-speed = <115200>;
+		};
+
+		BRG1: brg@b208 {
+			compatible = "marvell,mv64360-brg";
+			reg = <0xb208 0x8>;
+			clock-src = <8>;
+			clock-frequency = <133333333>;
+			current-speed = <115200>;
+		};
+
+		CUNIT: cunit@f200 {
+			reg = <0xf200 0x200>;
+		};
+
+		MPSCROUTING: mpscrouting@b400 {
+			reg = <0xb400 0xc>;
+		};
+
+		MPSCINTR: mpscintr@b800 {
+			reg = <0xb800 0x100>;
+			virtual-reg = <0xd800b800>;
+		};
+
+		MPSC0: mpsc@8000 {
+			device_type = "serial";
+			compatible = "marvell,mv64360-mpsc";
+			reg = <0x8000 0x38>;
+			virtual-reg = <0xd8008000>;
+			sdma = <&SDMA0>;
+			brg = <&BRG0>;
+			cunit = <&CUNIT>;
+			mpscrouting = <&MPSCROUTING>;
+			mpscintr = <&MPSCINTR>;
+			cell-index = <0>;
+			interrupts = <40>;
+			interrupt-parent = <&PIC>;
+		};
+
+		MPSC1: mpsc@9000 {
+			device_type = "serial";
+			compatible = "marvell,mv64360-mpsc";
+			reg = <0x9000 0x38>;
+			virtual-reg = <0xd8009000>;
+			sdma = <&SDMA1>;
+			brg = <&BRG1>;
+			cunit = <&CUNIT>;
+			mpscrouting = <&MPSCROUTING>;
+			mpscintr = <&MPSCINTR>;
+			cell-index = <1>;
+			interrupts = <42>;
+			interrupt-parent = <&PIC>;
+		};
+
+		wdt@b410 {			/* watchdog timer */
+			compatible = "marvell,mv64360-wdt";
+			reg = <0xb410 0x8>;
+		};
+
+		i2c@c000 {
+			compatible = "marvell,mv64360-i2c";
+			reg = <0xc000 0x20>;
+			virtual-reg = <0xd800c000>;
+			interrupts = <37>;
+			interrupt-parent = <&PIC>;
+		};
+
+		PIC: pic {
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			compatible = "marvell,mv64360-pic";
+			reg = <0x0000 0x88>;
+			interrupt-controller;
+		};
+
+		mpp@f000 {
+			compatible = "marvell,mv64360-mpp";
+			reg = <0xf000 0x10>;
+		};
+
+		gpp@f100 {
+			compatible = "marvell,mv64360-gpp";
+			reg = <0xf100 0x20>;
+		};
+
+		PCI0: pci@80000000 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			compatible = "marvell,mv64360-pci";
+			reg = <0x0cf8 0x8>;
+			ranges = <0x01000000 0x0 0x00000000 0xd4000000 0x0 0x01000000
+				  0x02000000 0x0 0x80000000 0x80000000 0x0 0x08000000>;
+			bus-range = <0 255>;
+			clock-frequency = <66000000>;
+			interrupt-pci-iack = <0x0c34>;
+			interrupt-parent = <&PIC>;
+			interrupt-map-mask = <0x0000 0x0 0x0 0x7>;
+			interrupt-map = <
+				/* Only one interrupt line for PMC0 slot (INTA) */
+				0x0000 0 0 1 &PIC 88
+			>;
+		};
+
+
+		PCI1: pci@a0000000 {
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			compatible = "marvell,mv64360-pci";
+			reg = <0x0c78 0x8>;
+			ranges = <0x01000000 0x0 0x00000000 0xd0000000 0x0 0x01000000
+				  0x02000000 0x0 0x80000000 0xa0000000 0x0 0x08000000>;
+			bus-range = <0 255>;
+			clock-frequency = <66000000>;
+			interrupt-pci-iack = <0x0cb4>;
+			interrupt-parent = <&PIC>;
+			interrupt-map-mask = <0xf800 0x00 0x00 0x7>;
+			interrupt-map = <
+				/* IDSEL 0x01: PMC1 ? */
+				0x0800 0 0 1 &PIC 88
+				/* IDSEL 0x02: cPCI bridge */
+				0x1000 0 0 1 &PIC 88
+				/* IDSEL 0x03: USB controller */
+				0x1800 0 0 1 &PIC 91
+				/* IDSEL 0x04: SATA controller */
+				0x2000 0 0 1 &PIC 95
+			>;
+		};
+
+		cpu-error@0070 {
+			compatible = "marvell,mv64360-cpu-error";
+			reg = <0x0070 0x10 0x0128 0x28>;
+			interrupts = <3>;
+			interrupt-parent = <&PIC>;
+		};
+
+		sram-ctrl@0380 {
+			compatible = "marvell,mv64360-sram-ctrl";
+			reg = <0x0380 0x80>;
+			interrupts = <13>;
+			interrupt-parent = <&PIC>;
+		};
+
+		pci-error@1d40 {
+			compatible = "marvell,mv64360-pci-error";
+			reg = <0x1d40 0x40 0x0c28 0x4>;
+			interrupts = <12>;
+			interrupt-parent = <&PIC>;
+		};
+
+		pci-error@1dc0 {
+			compatible = "marvell,mv64360-pci-error";
+			reg = <0x1dc0 0x40 0x0ca8 0x4>;
+			interrupts = <16>;
+			interrupt-parent = <&PIC>;
+		};
+
+		mem-ctrl@1400 {
+			compatible = "marvell,mv64360-mem-ctrl";
+			reg = <0x1400 0x60>;
+			interrupts = <17>;
+			interrupt-parent = <&PIC>;
+		};
+		/* Devices attached to the device controller */
+		devicebus@045c {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "marvell,mv64306-devctrl";
+			reg = <0x45C 0x88>;
+			interrupts = <1>;
+			interrupt-parent = <&PIC>;
+			ranges = 	<0 0 0xd8100000 0x10000
+					 2 0 0xd8110000 0x10000
+					 4 0 0xf8000000 0x8000000>;
+			fpga@0,0 {
+				compatible = "sbs,fpga-c2k";
+				reg = <0 0 0x10000>;
+			};
+			fpga_usart@2,0 {
+				compatible = "sbs,fpga_usart-c2k";
+				reg = <2 0 0x10000>;
+			};
+			nor_flash@4,0 {
+				compatible = "cfi-flash";
+				reg = <4 0 0x8000000>; /* 128MB */
+				bank-width = <4>;
+				device-width = <1>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				partition@0 {
+					label = "boot";
+					reg = <0x00000000 0x00080000>;
+				};
+				partition@40000 {
+					label = "kernel";
+					reg = <0x00080000 0x00400000>;
+				};
+				partition@440000 {
+					label = "initrd";
+					reg = <0x00480000 0x00B80000>;
+				};
+				partition@1000000 {
+					label = "rootfs";
+					reg = <0x01000000 0x06800000>;
+				};
+				partition@7800000 {
+					label = "recovery";
+					reg = <0x07800000 0x00800000>;
+					read-only;
+				};
+			};
+		};
+	};
+	chosen {
+		linux,stdout-path = &MPSC0;
+	};
+};
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index 39634124929b..79fe412c11c9 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,canyonlands";
 	compatible = "amcc,canyonlands";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,460EX";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-460ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -60,11 +62,11 @@
 		compatible = "ibm,uic-460ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -72,11 +74,11 @@
 		compatible = "ibm,uic-460ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <a 4 b 4>; /* cascade */
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -84,22 +86,22 @@
 		compatible = "ibm,uic-460ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <3>;
-		dcr-reg = <0f0 009>;
+		dcr-reg = <0x0f0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <10 4 11 4>; /* cascade */
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-460ex";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-460ex";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -111,74 +113,74 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
-			num-rx-chans = <10>;
+			num-rx-chans = <16>;
 			#address-cells = <0>;
 			#size-cells = <0>;
 			interrupt-parent = <&UIC2>;
-			interrupts = <	/*TXEOB*/ 6 4
-					/*RXEOB*/ 7 4
-					/*SERR*/  3 4
-					/*TXDE*/  4 4
-					/*RXDE*/  5 4>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-460ex", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <b0000000 4 b0000000 50000000>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-460ex", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <6 4>;
+				interrupts = <0x6 0x4>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 1e0000>;
+						reg = <0x00000000 0x001e0000>;
 					};
 					partition@1e0000 {
 						label = "dtb";
-						reg = <1e0000 20000>;
+						reg = <0x001e0000 0x00020000>;
 					};
 					partition@200000 {
 						label = "ramdisk";
-						reg = <200000 1400000>;
+						reg = <0x00200000 0x01400000>;
 					};
 					partition@1600000 {
 						label = "jffs2";
-						reg = <1600000 400000>;
+						reg = <0x01600000 0x00400000>;
 					};
 					partition@1a00000 {
 						label = "user";
-						reg = <1a00000 2560000>;
+						reg = <0x01a00000 0x02560000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -186,103 +188,103 @@
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART2: serial@ef600500 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600500 8>;
-				virtual-reg = <ef600500>;
+				reg = <0xef600500 0x00000008>;
+				virtual-reg = <0xef600500>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1d 4>;
+				interrupts = <0x1d 0x4>;
 			};
 
 			UART3: serial@ef600600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600600 8>;
-				virtual-reg = <ef600600>;
+				reg = <0xef600600 0x00000008>;
+				virtual-reg = <0xef600600>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4>;
+				interrupts = <0x1e 0x4>;
 			};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-460ex", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-460ex", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-460ex", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@ef601500 {
 				compatible = "ibm,rgmii-460ex", "ibm,rgmii";
-				reg = <ef601500 8>;
+				reg = <0xef601500 0x00000008>;
 				has-mdio;
 			};
 
 			TAH0: emac-tah@ef601350 {
 				compatible = "ibm,tah-460ex", "ibm,tah";
-				reg = <ef601350 30>;
+				reg = <0xef601350 0x00000030>;
 			};
 
 			TAH1: emac-tah@ef601450 {
 				compatible = "ibm,tah-460ex", "ibm,tah";
-				reg = <ef601450 30>;
+				reg = <0xef601450 0x00000030>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
-				compatible = "ibm,emac-460ex", "ibm,emac4";
+				compatible = "ibm,emac-460ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 10 4
-						 /*Wake*/   1 &UIC2 14 4>;
-				reg = <ef600e00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				tah-device = <&TAH0>;
@@ -293,25 +295,25 @@
 
 			EMAC1: ethernet@ef600f00 {
 				device_type = "network";
-				compatible = "ibm,emac-460ex", "ibm,emac4";
+				compatible = "ibm,emac-460ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 11 4
-						 /*Wake*/   1 &UIC2 15 4>;
-				reg = <ef600f00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <8>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
 				tah-device = <&TAH1>;
@@ -331,27 +333,27 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <c 0ec00000   8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       c 0ed00000   4   /* Special cycles */
-			       c 0ec80000 100	/* Internal registers */
-			       c 0ec80100  fc>;	/* Internal messaging registers */
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
-				  01000000 0 00000000 0000000c 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0 to 0x3f */
-			bus-range = <0 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
-			interrupt-map-mask = <0000 0 0 0>;
-			interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
 		};
 
 		PCIE0: pciex@d00000000 {
@@ -361,23 +363,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <d 00000000 20000000	/* Config space access */
-			       c 08010000 00001000>;	/* Registers */
-			dcr-reg = <100 020>;
-			sdr-base = <300>;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
-				  01000000 0 00000000 0000000f 80000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 40 to 0x7f */
-			bus-range = <40 7f>;
+			bus-range = <0x40 0x7f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -387,12 +389,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 c 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 d 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 e 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@d20000000 {
@@ -402,23 +404,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <d 20000000 20000000	/* Config space access */
-			       c 08011000 00001000>;	/* Registers */
-			dcr-reg = <120 020>;
-			sdr-base = <340>;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
-				  01000000 0 00000000 0000000f 80010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 80 to 0xbf */
-			bus-range = <80 bf>;
+			bus-range = <0x80 0xbf>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -428,12 +430,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 10 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 11 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 12 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts
index 5079dc890e0e..ec2d142291b4 100644
--- a/arch/powerpc/boot/dts/ebony.dts
+++ b/arch/powerpc/boot/dts/ebony.dts
@@ -11,12 +11,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "ibm,ebony";
 	compatible = "ibm,ebony";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -32,13 +34,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440GP";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; // Filled in by zImage
 			timebase-frequency = <0>; // Filled in by zImage
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>; /* 32 kB */
-			d-cache-size = <8000>; /* 32 kB */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>; /* 32 kB */
+			d-cache-size = <32768>; /* 32 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -46,14 +48,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; // Filled in by zImage
+		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440gp", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -64,17 +66,17 @@
 		compatible = "ibm,uic-440gp", "ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	CPC0: cpc {
 		compatible = "ibm,cpc-440gp";
-		dcr-reg = <0b0 003 0e0 010>;
+		dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
 		// FIXME: anything else?
 	};
 
@@ -87,37 +89,37 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-440gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 			// FIXME: anything else?
 		};
 
 		SRAM0: sram {
 			compatible = "ibm,sram-440gp";
-			dcr-reg = <020 8 00a 1>;
+			dcr-reg = <0x020 0x008 0x00a 0x001>;
 		};
 
 		DMA0: dma {
 			// FIXME: ???
 			compatible = "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <4>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					 /*RXEOB*/ 1 &UIC0 b 4
-					 /*SERR*/  2 &UIC1 0 4
-					 /*TXDE*/  3 &UIC1 1 4
-					 /*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					 /*SERR*/  0x2 &UIC1 0x0 0x4
+					 /*TXDE*/  0x3 &UIC1 0x1 0x4
+					 /*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
@@ -126,34 +128,34 @@
 			#size-cells = <1>;
 			/* Wish there was a nicer way of specifying a full 32-bit
 			   range */
-			ranges = <00000000 1 00000000 80000000
-				  80000000 1 80000000 80000000>;
-			dcr-reg = <090 00b>;
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			dcr-reg = <0x090 0x00b>;
 			interrupt-parent = <&UIC1>;
-			interrupts = <7 4>;
+			interrupts = <0x7 0x4>;
 			clock-frequency = <0>; // Filled in by zImage
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; // Filled in by zImage
 				// ranges property is supplied by zImage
 				// based on firmware's configuration of the
 				// EBC bridge
-				interrupts = <5 4>;
+				interrupts = <0x5 0x4>;
 				interrupt-parent = <&UIC1>;
 
 				small-flash@0,80000 {
 					compatible = "jedec-flash";
 					bank-width = <1>;
-					reg = <0 80000 80000>;
+					reg = <0x00000000 0x00080000 0x00080000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "OpenBIOS";
-						reg = <0 80000>;
+						reg = <0x00000000 0x00080000>;
 						read-only;
 					};
 				};
@@ -161,101 +163,101 @@
 				nvram@1,0 {
 					/* NVRAM & RTC */
 					compatible = "ds1743-nvram";
-					#bytes = <2000>;
-					reg = <1 0 2000>;
+					#bytes = <0x2000>;
+					reg = <0x00000001 0x00000000 0x00002000>;
 				};
 
 				large-flash@2,0 {
 					compatible = "jedec-flash";
 					bank-width = <1>;
-					reg = <2 0 400000>;
+					reg = <0x00000002 0x00000000 0x00400000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "fs";
-						reg = <0 380000>;
+						reg = <0x00000000 0x00380000>;
 					};
 					partition@380000 {
 						label = "firmware";
-						reg = <380000 80000>;
+						reg = <0x00380000 0x00080000>;
 					};
 				};
 
 				ir@3,0 {
-					reg = <3 0 10>;
+					reg = <0x00000003 0x00000000 0x00000010>;
 				};
 
 				fpga@7,0 {
 					compatible = "Ebony-FPGA";
-					reg = <7 0 10>;
-					virtual-reg = <e8300000>;
+					reg = <0x00000007 0x00000000 0x00000010>;
+					virtual-reg = <0xe8300000>;
 				};
 			};
 
 			UART0: serial@40000200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000200 8>;
-				virtual-reg = <e0000200>;
-				clock-frequency = <A8C000>;
-				current-speed = <2580>;
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+				clock-frequency = <11059200>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@40000300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000300 8>;
-				virtual-reg = <e0000300>;
-				clock-frequency = <A8C000>;
-				current-speed = <2580>;
+				reg = <0x40000300 0x00000008>;
+				virtual-reg = <0xe0000300>;
+				clock-frequency = <11059200>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@40000400 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000400 14>;
+				reg = <0x40000400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 			IIC1: i2c@40000500 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000500 14>;
+				reg = <0x40000500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			GPIO0: gpio@40000700 {
 				/* FIXME */
 				compatible = "ibm,gpio-440gp";
-				reg = <40000700 20>;
+				reg = <0x40000700 0x00000020>;
 			};
 
 			ZMII0: emac-zmii@40000780 {
 				compatible = "ibm,zmii-440gp", "ibm,zmii";
-				reg = <40000780 c>;
+				reg = <0x40000780 0x0000000c>;
 			};
 
 			EMAC0: ethernet@40000800 {
 				device_type = "network";
 				compatible = "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <40000800 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0x40000800 0x00000070>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0 1>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
@@ -263,18 +265,18 @@
 				device_type = "network";
 				compatible = "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4 1f 4>;
-				reg = <40000900 70>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0x40000900 0x00000070>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2 3>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 			};
@@ -282,9 +284,9 @@
 
 			GPT0: gpt@40000a00 {
 				/* FIXME */
-				reg = <40000a00 d4>;
+				reg = <0x40000a00 0x000000d4>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <12 4 13 4 14 4 15 4 16 4>;
+				interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
 			};
 
 		};
@@ -296,35 +298,35 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix";
 			primary;
-			reg = <2 0ec00000 8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       2 0ed00000 4     /* Special cycles */
-			       2 0ec80000 f0	/* Internal registers */
-			       2 0ec80100 fc>;	/* Internal messaging registers */
+			reg = <0x00000002 0x0ec00000 0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x00000002 0x0ed00000 0x00000004     /* Special cycles */
+			       0x00000002 0x0ec80000 0x000000f0	/* Internal registers */
+			       0x00000002 0x0ec80100 0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 00000003 80000000 0 80000000
-				  01000000 0 00000000 00000002 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* Ebony has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 0 &UIC0 17 8
+				0x800 0x0 0x0 0x0 &UIC0 0x17 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 0 &UIC0 18 8
+				0x1000 0x0 0x0 0x0 &UIC0 0x18 0x8
 
 				/* IDSEL 3 */
-				1800 0 0 0 &UIC0 19 8
+				0x1800 0x0 0x0 0x0 &UIC0 0x19 0x8
 
 				/* IDSEL 4 */
-				2000 0 0 0 &UIC0 1a 8
+				0x2000 0x0 0x0 0x0 &UIC0 0x1a 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/ep405.dts b/arch/powerpc/boot/dts/ep405.dts
index 92938557ac8a..53ef06cc2134 100644
--- a/arch/powerpc/boot/dts/ep405.dts
+++ b/arch/powerpc/boot/dts/ep405.dts
@@ -9,12 +9,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "ep405";
 	compatible = "ep405";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405GP";
-			reg = <0>;
-			clock-frequency = <bebc200>; /* Filled in by zImage */
+			reg = <0x00000000>;
+			clock-frequency = <200000000>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>;
-			d-cache-size = <4000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>;
+			d-cache-size = <16384>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 9>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -65,91 +67,91 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL: mcmal {
 			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <1>;
 			num-rx-chans = <1>;
 			interrupt-parent = <&UIC0>;
 			interrupts = <
-				b 4 /* TXEOB */
-				c 4 /* RXEOB */
-				a 4 /* SERR */
-				d 4 /* TXDE */
-				e 4 /* RXDE */>;
+				0xb 0x4 /* TXEOB */
+				0xc 0x4 /* RXEOB */
+				0xa 0x4 /* SERR */
+				0xd 0x4 /* TXDE */
+				0xe 0x4 /* RXDE */>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <ef600000 ef600000 a00000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0xef600000 0xef600000 0x00a00000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <2580>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <2580>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC: i2c@ef600500 {
 				compatible = "ibm,iic-405gp", "ibm,iic";
-				reg = <ef600500 11>;
+				reg = <0xef600500 0x00000011>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			GPIO: gpio@ef600700 {
 				compatible = "ibm,gpio-405gp";
-				reg = <ef600700 20>;
+				reg = <0xef600700 0x00000020>;
 			};
 
 			EMAC: ethernet@ef600800 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
 				compatible = "ibm,emac-405gp", "ibm,emac";
 				interrupt-parent = <&UIC0>;
 				interrupts = <
-					f 4 /* Ethernet */
-					9 4 /* Ethernet Wake Up */>;
+					0xf 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
 				local-mac-address = [000000000000]; /* Filled in by zImage */
-				reg = <ef600800 70>;
+				reg = <0xef600800 0x00000070>;
 				mal-device = <&MAL>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 			};
 
 		};
 
 		EBC0: ebc {
 			compatible = "ibm,ebc-405gp", "ibm,ebc";
-			dcr-reg = <012 2>;
+			dcr-reg = <0x012 0x002>;
 			#address-cells = <2>;
 			#size-cells = <1>;
 
@@ -163,13 +165,13 @@
 			/* NVRAM and RTC */
 			nvrtc@4,200000 {
 				compatible = "ds1742";
-				reg = <4 200000 0>; /* size fixed up by zImage */
+				reg = <0x00000004 0x00200000 0x00000000>; /* size fixed up by zImage */
 			};
 
 			/* "BCSR" CPLD contains a PCI irq controller */
 			bcsr@4,0 {
 				compatible = "ep405-bcsr";
-				reg = <4 0 10>;
+				reg = <0x00000004 0x00000000 0x00000010>;
 				interrupt-controller;
 				/* Routing table */
 				irq-routing = [	00	/* SYSERR */
@@ -198,26 +200,26 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
 			primary;
-			reg = <eec00000 8	/* Config space access */
-			       eed80000 4	/* IACK */
-			       eed80000 4	/* Special cycle */
-			       ef480000 40>;	/* Internal registers */
+			reg = <0xeec00000 0x00000008	/* Config space access */
+			       0xeed80000 0x00000004	/* IACK */
+			       0xeed80000 0x00000004	/* Special cycle */
+			       0xef480000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 80000000 80000000 0 20000000
-				  01000000 0 00000000 e8000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* That's all I know about IRQs on that thing ... */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* USB */
-				7000 0 0 0 &UIC0 1e 8 /* IRQ5 */
+				0x7000 0x0 0x0 0x0 &UIC0 0x1e 0x8 /* IRQ5 */
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts
index 0f2fc077d8db..24cf0dba120c 100644
--- a/arch/powerpc/boot/dts/glacier.dts
+++ b/arch/powerpc/boot/dts/glacier.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,glacier";
 	compatible = "amcc,glacier", "amcc,canyonlands";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -31,13 +33,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,460GT";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -45,14 +47,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-460gt","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -62,11 +64,11 @@
 		compatible = "ibm,uic-460gt","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -74,11 +76,11 @@
 		compatible = "ibm,uic-460gt","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <a 4 b 4>; /* cascade */
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -86,22 +88,22 @@
 		compatible = "ibm,uic-460gt","ibm,uic";
 		interrupt-controller;
 		cell-index = <3>;
-		dcr-reg = <0f0 009>;
+		dcr-reg = <0x0f0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <10 4 11 4>; /* cascade */
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-460gt";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-460gt";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -113,75 +115,75 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
-			num-rx-chans = <20>;
+			num-rx-chans = <32>;
 			#address-cells = <0>;
 			#size-cells = <0>;
 			interrupt-parent = <&UIC2>;
-			interrupts = <	/*TXEOB*/ 6 4
-					/*RXEOB*/ 7 4
-					/*SERR*/  3 4
-					/*TXDE*/  4 4
-					/*RXDE*/  5 4>;
-			desc-base-addr-high = <8>;
+			interrupts = <	/*TXEOB*/ 0x6 0x4
+					/*RXEOB*/ 0x7 0x4
+					/*SERR*/  0x3 0x4
+					/*TXDE*/  0x4 0x4
+					/*RXDE*/  0x5 0x4>;
+			desc-base-addr-high = <0x8>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-460gt", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <b0000000 4 b0000000 50000000>;
+			ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-460gt", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <6 4>;
+				interrupts = <0x6 0x4>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 1e0000>;
+						reg = <0x00000000 0x001e0000>;
 					};
 					partition@1e0000 {
 						label = "dtb";
-						reg = <1e0000 20000>;
+						reg = <0x001e0000 0x00020000>;
 					};
 					partition@200000 {
 						label = "ramdisk";
-						reg = <200000 1400000>;
+						reg = <0x00200000 0x01400000>;
 					};
 					partition@1600000 {
 						label = "jffs2";
-						reg = <1600000 400000>;
+						reg = <0x01600000 0x00400000>;
 					};
 					partition@1a00000 {
 						label = "user";
-						reg = <1a00000 2560000>;
+						reg = <0x01a00000 0x02560000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -189,109 +191,109 @@
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART2: serial@ef600500 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600500 8>;
-				virtual-reg = <ef600500>;
+				reg = <0xef600500 0x00000008>;
+				virtual-reg = <0xef600500>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1d 4>;
+				interrupts = <0x1d 0x4>;
 			};
 
 			UART3: serial@ef600600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600600 8>;
-				virtual-reg = <ef600600>;
+				reg = <0xef600600 0x00000008>;
+				virtual-reg = <0xef600600>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>; /* Filled in by U-Boot */
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4>;
+				interrupts = <0x1e 0x4>;
 			};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-460gt", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-460gt", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-460gt", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@ef601500 {
 				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
-				reg = <ef601500 8>;
+				reg = <0xef601500 0x00000008>;
 				has-mdio;
 			};
 
 			RGMII1: emac-rgmii@ef601600 {
 				compatible = "ibm,rgmii-460gt", "ibm,rgmii";
-				reg = <ef601600 8>;
+				reg = <0xef601600 0x00000008>;
 				has-mdio;
 			};
 
 			TAH0: emac-tah@ef601350 {
 				compatible = "ibm,tah-460gt", "ibm,tah";
-				reg = <ef601350 30>;
+				reg = <0xef601350 0x00000030>;
 			};
 
 			TAH1: emac-tah@ef601450 {
 				compatible = "ibm,tah-460gt", "ibm,tah";
-				reg = <ef601450 30>;
+				reg = <0xef601450 0x00000030>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
 				compatible = "ibm,emac-460gt", "ibm,emac4";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 10 4
-						 /*Wake*/   1 &UIC2 14 4>;
-				reg = <ef600e00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+						 /*Wake*/   0x1 &UIC2 0x14 0x4>;
+				reg = <0xef600e00 0x00000074>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				tah-device = <&TAH0>;
@@ -304,23 +306,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-460gt", "ibm,emac4";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 11 4
-						 /*Wake*/   1 &UIC2 15 4>;
-				reg = <ef600f00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+						 /*Wake*/   0x1 &UIC2 0x15 0x4>;
+				reg = <0xef600f00 0x00000074>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <8>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
 				tah-device = <&TAH1>;
@@ -334,23 +336,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-460gt", "ibm,emac4";
 				interrupt-parent = <&EMAC2>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 12 4
-						 /*Wake*/   1 &UIC2 16 4>;
-				reg = <ef601100 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+						 /*Wake*/   0x1 &UIC2 0x16 0x4>;
+				reg = <0xef601100 0x00000074>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2>;
-				mal-rx-channel = <10>;
+				mal-rx-channel = <16>;
 				cell-index = <2>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII1>;
 				rgmii-channel = <0>;
 				has-inverted-stacr-oc;
@@ -362,23 +364,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-460gt", "ibm,emac4";
 				interrupt-parent = <&EMAC3>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC2 13 4
-						 /*Wake*/   1 &UIC2 17 4>;
-				reg = <ef601200 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4
+						 /*Wake*/   0x1 &UIC2 0x17 0x4>;
+				reg = <0xef601200 0x00000074>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <3>;
-				mal-rx-channel = <18>;
+				mal-rx-channel = <24>;
 				cell-index = <3>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII1>;
 				rgmii-channel = <1>;
 				has-inverted-stacr-oc;
@@ -396,27 +398,27 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <c 0ec00000   8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       c 0ed00000   4   /* Special cycles */
-			       c 0ec80000 100	/* Internal registers */
-			       c 0ec80100  fc>;	/* Internal messaging registers */
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
-				  01000000 0 00000000 0000000c 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0 to 0x3f */
-			bus-range = <0 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
-			interrupt-map-mask = <0000 0 0 0>;
-			interrupt-map = < 0000 0 0 0 &UIC1 0 8 >;
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
 		};
 
 		PCIE0: pciex@d00000000 {
@@ -426,23 +428,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <d 00000000 20000000	/* Config space access */
-			       c 08010000 00001000>;	/* Registers */
-			dcr-reg = <100 020>;
-			sdr-base = <300>;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08010000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
-				  01000000 0 00000000 0000000f 80000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 40 to 0x7f */
-			bus-range = <40 7f>;
+			bus-range = <0x40 0x7f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -452,12 +454,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 c 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 d 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 e 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 f 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@d20000000 {
@@ -467,23 +469,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <d 20000000 20000000	/* Config space access */
-			       c 08011000 00001000>;	/* Registers */
-			dcr-reg = <120 020>;
-			sdr-base = <340>;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x08011000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
-				  01000000 0 00000000 0000000f 80010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 80 to 0xbf */
-			bus-range = <80 bf>;
+			bus-range = <0x80 0xbf>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -493,12 +495,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 10 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 11 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 12 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 13 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts
index b5d95ac24dbf..513bc43a71af 100644
--- a/arch/powerpc/boot/dts/haleakala.dts
+++ b/arch/powerpc/boot/dts/haleakala.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "amcc,haleakala";
 	compatible = "amcc,haleakala", "amcc,kilauea";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -28,13 +30,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405EXr";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>; /* 16 kB */
-			d-cache-size = <4000>; /* 16 kB */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -42,14 +44,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic-405exr", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -59,11 +61,11 @@
 		compatible = "ibm,uic-405exr","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -71,11 +73,11 @@
 		compatible = "ibm,uic-405exr","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -88,72 +90,72 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405exr";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-405exr", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405exr", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <80000000 80000000 10000000
-				  ef600000 ef600000 a00000
-				  f0000000 f0000000 10000000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0x80000000 0x80000000 0x10000000
+				  0xef600000 0xef600000 0x00a00000
+				  0xf0000000 0xf0000000 0x10000000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-405exr", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 200000>;
+						reg = <0x00000000 0x00200000>;
 					};
 					partition@200000 {
 						label = "root";
-						reg = <200000 200000>;
+						reg = <0x00200000 0x00200000>;
 					};
 					partition@400000 {
 						label = "user";
-						reg = <400000 3b60000>;
+						reg = <0x00400000 0x03b60000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -161,68 +163,68 @@
 			UART0: serial@ef600200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600200 8>;
-				virtual-reg = <ef600200>;
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1a 4>;
+				interrupts = <0x1a 0x4>;
 			};
 
 			UART1: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@ef600400 {
 				compatible = "ibm,iic-405exr", "ibm,iic";
-				reg = <ef600400 14>;
+				reg = <0xef600400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600500 {
 				compatible = "ibm,iic-405exr", "ibm,iic";
-				reg = <ef600500 14>;
+				reg = <0xef600500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 
 			RGMII0: emac-rgmii@ef600b00 {
 				compatible = "ibm,rgmii-405exr", "ibm,rgmii";
-				reg = <ef600b00 104>;
+				reg = <0xef600b00 0x00000104>;
 				has-mdio;
 			};
 
 			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
-				compatible = "ibm,emac-405exr", "ibm,emac4";
+				compatible = "ibm,emac-405exr", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600900 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600900 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				has-inverted-stacr-oc;
@@ -237,23 +239,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <a0000000 20000000	/* Config space access */
-			       ef000000 00001000>;	/* Registers */
-			dcr-reg = <040 020>;
-			sdr-base = <400>;
+			port = <0x0>; /* port number */
+			reg = <0xa0000000 0x20000000	/* Config space access */
+			       0xef000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x040 0x020>;
+			sdr-base = <0x400>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 90000000 0 08000000
-				  01000000 0 00000000 e0000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x00 to 0x3f */
-			bus-range = <00 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -263,12 +265,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 0 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 1 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 2 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/holly.dts b/arch/powerpc/boot/dts/holly.dts
index b5d87895fe06..f87fe7b9ced9 100644
--- a/arch/powerpc/boot/dts/holly.dts
+++ b/arch/powerpc/boot/dts/holly.dts
@@ -10,6 +10,8 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	model = "41K7339";
 	compatible = "ibm,holly";
@@ -21,22 +23,22 @@
 		#size-cells =<0>;
 		PowerPC,750CL@0 {
 			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <20>;
-			i-cache-line-size = <20>;
-			d-cache-size = <8000>;
-			i-cache-size = <8000>;
-			d-cache-sets = <80>;
-			i-cache-sets = <80>;
-			timebase-frequency = <2faf080>;
-			clock-frequency = <23c34600>;
-			bus-frequency = <bebc200>;
+			reg = <0x00000000>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			d-cache-sets = <128>;
+			i-cache-sets = <128>;
+			timebase-frequency = <50000000>;
+			clock-frequency = <600000000>;
+			bus-frequency = <200000000>;
 		};
 	};
 
 	memory@0 {
 		device_type = "memory";
-		reg = <00000000 20000000>;
+		reg = <0x00000000 0x20000000>;
 	};
 
   	tsi109@c0000000 {
@@ -44,33 +46,33 @@
 		compatible = "tsi109-bridge", "tsi108-bridge";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges = <00000000 c0000000 00010000>;
-		reg = <c0000000 00010000>;
+		ranges = <0x00000000 0xc0000000 0x00010000>;
+		reg = <0xc0000000 0x00010000>;
 
 		i2c@7000 {
 			device_type = "i2c";
 			compatible  = "tsi109-i2c", "tsi108-i2c";
 			interrupt-parent = <&MPIC>;
-			interrupts = <e 2>;
-			reg = <7000 400>;
+			interrupts = <0xe 0x2>;
+			reg = <0x00007000 0x00000400>;
 		};
 
 		MDIO: mdio@6000 {
 			device_type = "mdio";
 			compatible = "tsi109-mdio", "tsi108-mdio";
-			reg = <6000 50>;
+			reg = <0x00006000 0x00000050>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 
 			PHY1: ethernet-phy@1 {
 				compatible = "bcm5461a";
-				reg = <1>;
+				reg = <0x00000001>;
 				txc-rxc-delay-disable;
 			};
 
 			PHY2: ethernet-phy@2 {
 				compatible = "bcm5461a";
-				reg = <2>;
+				reg = <0x00000002>;
 				txc-rxc-delay-disable;
 			};
 		};
@@ -80,10 +82,10 @@
 			compatible = "tsi109-ethernet", "tsi108-ethernet";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <6000 200>;
+			reg = <0x00006000 0x00000200>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupt-parent = <&MPIC>;
-			interrupts = <10 2>;
+			interrupts = <0x10 0x2>;
 			mdio-handle = <&MDIO>;
 			phy-handle = <&PHY1>;
 		};
@@ -93,10 +95,10 @@
 			compatible = "tsi109-ethernet", "tsi108-ethernet";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <6400 200>;
+			reg = <0x00006400 0x00000200>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupt-parent = <&MPIC>;
-			interrupts = <11 2>;
+			interrupts = <0x11 0x2>;
 			mdio-handle = <&MDIO>;
 			phy-handle = <&PHY2>;
 		};
@@ -104,23 +106,23 @@
 		serial@7808 {
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <7808 200>;
-			virtual-reg = <c0007808>;
-			clock-frequency = <3F9C6000>;
-			current-speed = <1c200>;
+			reg = <0x00007808 0x00000200>;
+			virtual-reg = <0xc0007808>;
+			clock-frequency = <1067212800>;
+			current-speed = <115200>;
 			interrupt-parent = <&MPIC>;
-			interrupts = <c 2>;
+			interrupts = <0xc 0x2>;
 		};
 
 		serial@7c08 {
 			device_type = "serial";
 			compatible = "ns16550";
-			reg = <7c08 200>;
-			virtual-reg = <c0007c08>;
-			clock-frequency = <3F9C6000>;
-			current-speed = <1c200>;
+			reg = <0x00007c08 0x00000200>;
+			virtual-reg = <0xc0007c08>;
+			clock-frequency = <1067212800>;
+			current-speed = <115200>;
 			interrupt-parent = <&MPIC>;
-			interrupts = <d 2>;
+			interrupts = <0xd 0x2>;
 		};
 
 	  	MPIC: pic@7400 {
@@ -128,7 +130,7 @@
 			compatible = "chrp,open-pic";
 			interrupt-controller;
 			#interrupt-cells = <2>;
-			reg = <7400 400>;
+			reg = <0x00007400 0x00000400>;
 			big-endian;
 		};
 
@@ -138,42 +140,42 @@
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
-			reg = <1000 1000>;
-			bus-range = <0 0>;
+			reg = <0x00001000 0x00001000>;
+			bus-range = <0x0 0x0>;
 			/*----------------------------------------------------+
 			| PCI memory range.
 			| 01 denotes I/O space
 			| 02 denotes 32-bit memory space
 			+----------------------------------------------------*/
-			ranges = <02000000 0 40000000 40000000 0 10000000
-				  01000000 0 00000000 7e000000 0 00010000>;
-			clock-frequency = <7f28154>;
+			ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
+				  0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
+			clock-frequency = <133333332>;
 			interrupt-parent = <&MPIC>;
-			interrupts = <17 2>;
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupts = <0x17 0x2>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			/*----------------------------------------------------+
 			| The INTA, INTB, INTC, INTD are shared.
 			+----------------------------------------------------*/
 			interrupt-map = <
-				0800 0 0 1 &RT0 24 0
-				0800 0 0 2 &RT0 25 0
-				0800 0 0 3 &RT0 26 0
-				0800 0 0 4 &RT0 27 0
-
-				1000 0 0 1 &RT0 25 0
-				1000 0 0 2 &RT0 26 0
-				1000 0 0 3 &RT0 27 0
-				1000 0 0 4 &RT0 24 0
-
-				1800 0 0 1 &RT0 26 0
-				1800 0 0 2 &RT0 27 0
-				1800 0 0 3 &RT0 24 0
-				1800 0 0 4 &RT0 25 0
-
-				2000 0 0 1 &RT0 27 0
-				2000 0 0 2 &RT0 24 0
-				2000 0 0 3 &RT0 25 0
-				2000 0 0 4 &RT0 26 0
+				0x800 0x0 0x0 0x1 &RT0 0x24 0x0
+				0x800 0x0 0x0 0x2 &RT0 0x25 0x0
+				0x800 0x0 0x0 0x3 &RT0 0x26 0x0
+				0x800 0x0 0x0 0x4 &RT0 0x27 0x0
+
+				0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
+				0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
+				0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
+				0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
+
+				0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
+				0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
+				0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
+				0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
+
+				0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
+				0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
+				0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
+				0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
 				>;
 
 			RT0: router@1180 {
@@ -183,7 +185,7 @@
  				clock-frequency = <0>;
  				#address-cells = <0>;
  				#interrupt-cells = <2>;
- 				interrupts = <17 2>;
+ 				interrupts = <0x17 0x2>;
 				interrupt-parent = <&MPIC>;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index cc2873a531d2..077819bc3cbd 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -12,12 +12,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,katmai";
 	compatible = "amcc,katmai";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -33,13 +35,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440SPe";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -47,14 +49,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440spe","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -64,11 +66,11 @@
 		compatible = "ibm,uic-440spe","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -76,11 +78,11 @@
 		compatible = "ibm,uic-440spe","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <a 4 b 4>; /* cascade */
+		interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -88,22 +90,22 @@
 		compatible = "ibm,uic-440spe","ibm,uic";
 		interrupt-controller;
 		cell-index = <3>;
-		dcr-reg = <0f0 009>;
+		dcr-reg = <0x0f0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <10 4 11 4>; /* cascade */
+		interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440spe";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440spe";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -115,108 +117,108 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440spe", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440spe", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <1>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC1 6 4
-					 /*RXEOB*/ 1 &UIC1 7 4
-					 /*SERR*/  2 &UIC1 1 4
-					 /*TXDE*/  3 &UIC1 2 4
-					 /*RXDE*/  4 &UIC1 3 4>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC1 0x6 0x4
+					 /*RXEOB*/ 0x1 &UIC1 0x7 0x4
+					 /*SERR*/  0x2 &UIC1 0x1 0x4
+					 /*TXDE*/  0x3 &UIC1 0x2 0x4
+					 /*RXDE*/  0x4 &UIC1 0x3 0x4>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <00000000 4 e0000000 20000000>;
+			ranges = <0x00000000 0x00000004 0xe0000000 0x20000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 			};
 
 			UART0: serial@10000200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <10000200 8>;
-				virtual-reg = <a0000200>;
+				reg = <0x10000200 0x00000008>;
+				virtual-reg = <0xa0000200>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <1c200>;
+				current-speed = <115200>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@10000300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <10000300 8>;
-				virtual-reg = <a0000300>;
+				reg = <0x10000300 0x00000008>;
+				virtual-reg = <0xa0000300>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 
 			UART2: serial@10000600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <10000600 8>;
-				virtual-reg = <a0000600>;
+				reg = <0x10000600 0x00000008>;
+				virtual-reg = <0xa0000600>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC1>;
-				interrupts = <5 4>;
+				interrupts = <0x5 0x4>;
 			};
 
 			IIC0: i2c@10000400 {
 				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <10000400 14>;
+				reg = <0x10000400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@10000500 {
 				compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic";
-				reg = <10000500 14>;
+				reg = <0x10000500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			EMAC0: ethernet@10000800 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
 				compatible = "ibm,emac-440spe", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <10000800 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0x10000800 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "gmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				has-inverted-stacr-oc;
 				has-new-stacr-staopc;
 			};
@@ -231,23 +233,23 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <c 0ec00000   8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       c 0ed00000   4   /* Special cycles */
-			       c 0ec80000 100	/* Internal registers */
-			       c 0ec80100  fc>;	/* Internal messaging registers */
+			reg = <0x0000000c 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x0000000c 0x0ed00000   0x00000004   /* Special cycles */
+			       0x0000000c 0x0ec80000 0x00000100	/* Internal registers */
+			       0x0000000c 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000d 80000000 0 80000000
-				  01000000 0 00000000 0000000c 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0 to 0xf */
-			bus-range = <0 f>;
+			bus-range = <0x0 0xf>;
 
 			/*
 			 * On Katmai, the following PCI-X interrupts signals
@@ -258,13 +260,13 @@
 			 * INTC: J2: 1-2
 			 * INTD: J1: 1-2
 			 */
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 1 &UIC1 14 8
-				0800 0 0 2 &UIC1 13 8
-				0800 0 0 3 &UIC1 12 8
-				0800 0 0 4 &UIC1 11 8
+				0x800 0x0 0x0 0x1 &UIC1 0x14 0x8
+				0x800 0x0 0x0 0x2 &UIC1 0x13 0x8
+				0x800 0x0 0x0 0x3 &UIC1 0x12 0x8
+				0x800 0x0 0x0 0x4 &UIC1 0x11 0x8
 			>;
 		};
 
@@ -275,23 +277,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <d 00000000 20000000	/* Config space access */
-			       c 10000000 00001000>;	/* Registers */
-			dcr-reg = <100 020>;
-			sdr-base = <300>;
+			port = <0x0>; /* port number */
+			reg = <0x0000000d 0x00000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x100 0x020>;
+			sdr-base = <0x300>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 00000000 0 80000000
-				  01000000 0 00000000 0000000f 80000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 10 to 0x1f */
-			bus-range = <10 1f>;
+			bus-range = <0x10 0x1f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -301,12 +303,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 0 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 1 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 2 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 3 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x3 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@d20000000 {
@@ -316,23 +318,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <d 20000000 20000000	/* Config space access */
-			       c 10001000 00001000>;	/* Registers */
-			dcr-reg = <120 020>;
-			sdr-base = <340>;
+			port = <0x1>; /* port number */
+			reg = <0x0000000d 0x20000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x120 0x020>;
+			sdr-base = <0x340>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000e 80000000 0 80000000
-				  01000000 0 00000000 0000000f 80010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 10 to 0x1f */
-			bus-range = <20 2f>;
+			bus-range = <0x20 0x2f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -342,12 +344,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 4 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 5 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 6 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 7 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x4 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x5 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0x6 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0x7 0x4 /* swizzled int D */>;
 		};
 
 		PCIE2: pciex@d40000000 {
@@ -357,23 +359,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex";
 			primary;
-			port = <2>; /* port number */
-			reg = <d 40000000 20000000	/* Config space access */
-			       c 10002000 00001000>;	/* Registers */
-			dcr-reg = <140 020>;
-			sdr-base = <370>;
+			port = <0x2>; /* port number */
+			reg = <0x0000000d 0x40000000 0x20000000	/* Config space access */
+			       0x0000000c 0x10002000 0x00001000>;	/* Registers */
+			dcr-reg = <0x140 0x020>;
+			sdr-base = <0x370>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 0000000f 00000000 0 80000000
-				  01000000 0 00000000 0000000f 80020000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x0000000f 0x00000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x0000000f 0x80020000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 10 to 0x1f */
-			bus-range = <30 3f>;
+			bus-range = <0x30 0x3f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -383,12 +385,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC3 8 4 /* swizzled int A */
-				0000 0 0 2 &UIC3 9 4 /* swizzled int B */
-				0000 0 0 3 &UIC3 a 4 /* swizzled int C */
-				0000 0 0 4 &UIC3 b 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC3 0x8 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC3 0x9 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts
index 48c9a6e71f1a..dececc4b5ff2 100644
--- a/arch/powerpc/boot/dts/kilauea.dts
+++ b/arch/powerpc/boot/dts/kilauea.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "amcc,kilauea";
 	compatible = "amcc,kilauea";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405EX";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>; /* 16 kB */
-			d-cache-size = <4000>; /* 16 kB */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic-405ex", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -60,11 +62,11 @@
 		compatible = "ibm,uic-405ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -72,11 +74,11 @@
 		compatible = "ibm,uic-405ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -89,72 +91,72 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405ex";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405ex", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <80000000 80000000 10000000
-				  ef600000 ef600000 a00000
-				  f0000000 f0000000 10000000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0x80000000 0x80000000 0x10000000
+				  0xef600000 0xef600000 0x00a00000
+				  0xf0000000 0xf0000000 0x10000000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-405ex", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 200000>;
+						reg = <0x00000000 0x00200000>;
 					};
 					partition@200000 {
 						label = "root";
-						reg = <200000 200000>;
+						reg = <0x00200000 0x00200000>;
 					};
 					partition@400000 {
 						label = "user";
-						reg = <400000 3b60000>;
+						reg = <0x00400000 0x03b60000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -162,68 +164,68 @@
 			UART0: serial@ef600200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600200 8>;
-				virtual-reg = <ef600200>;
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1a 4>;
+				interrupts = <0x1a 0x4>;
 			};
 
 			UART1: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@ef600400 {
 				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <ef600400 14>;
+				reg = <0xef600400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600500 {
 				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <ef600500 14>;
+				reg = <0xef600500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 
 			RGMII0: emac-rgmii@ef600b00 {
 				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
-				reg = <ef600b00 104>;
+				reg = <0xef600b00 0x00000104>;
 				has-mdio;
 			};
 
 			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600900 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600900 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				has-inverted-stacr-oc;
@@ -231,27 +233,27 @@
 			};
 
 			EMAC1: ethernet@ef600a00 {
-				linux,network-index = <1>;
+				linux,network-index = <0x1>;
 				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 19 4
-						/*Wake*/  1 &UIC1 1f 4>;
-				reg = <ef600a00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600a00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
 				has-inverted-stacr-oc;
@@ -266,23 +268,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <a0000000 20000000	/* Config space access */
-			       ef000000 00001000>;	/* Registers */
-			dcr-reg = <040 020>;
-			sdr-base = <400>;
+			port = <0x0>; /* port number */
+			reg = <0xa0000000 0x20000000	/* Config space access */
+			       0xef000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x040 0x020>;
+			sdr-base = <0x400>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 90000000 0 08000000
-				  01000000 0 00000000 e0000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x00 to 0x3f */
-			bus-range = <00 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -292,12 +294,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 0 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 1 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 2 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@0c0000000 {
@@ -307,23 +309,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <c0000000 20000000	/* Config space access */
-			       ef001000 00001000>;	/* Registers */
-			dcr-reg = <060 020>;
-			sdr-base = <440>;
+			port = <0x1>; /* port number */
+			reg = <0xc0000000 0x20000000	/* Config space access */
+			       0xef001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x060 0x020>;
+			sdr-base = <0x440>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 98000000 0 08000000
-				  01000000 0 00000000 e0010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x40 to 0x7f */
-			bus-range = <40 7f>;
+			bus-range = <0x40 0x7f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -333,12 +335,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 b 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 c 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 d 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 e 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
index f869ce3ca0b7..49737589ffc8 100644
--- a/arch/powerpc/boot/dts/ksi8560.dts
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;		/* From U-boot */
 			bus-frequency = <0>;			/* From U-boot */
 			clock-frequency = <0>;			/* From U-boot */
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -58,16 +59,16 @@
 		memory-controller@2000 {
 			compatible = "fsl,8540-memory-controller";
 			reg = <0x2000 0x1000>;
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			interrupts = <0x12 0x2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;		/* 32 bytes */
 			cache-size = <0x40000>;			/* L2, 256K */
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			interrupts = <0x10 0x2>;
 		};
 
@@ -78,10 +79,51 @@
 			compatible = "fsl-i2c";
 			reg = <0x3000 0x100>;
 			interrupts = <0x2b 0x2>;
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {					/* For TSECs */
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -89,13 +131,13 @@
 			reg = <0x24520 0x20>;
 
 			PHY1: ethernet-phy@1 {
-				interrupt-parent = <&MPIC>;
+				interrupt-parent = <&mpic>;
 				reg = <0x1>;
 				device_type = "ethernet-phy";
 			};
 
 			PHY2: ethernet-phy@2 {
-				interrupt-parent = <&MPIC>;
+				interrupt-parent = <&mpic>;
 				reg = <0x2>;
 				device_type = "ethernet-phy";
 			};
@@ -109,7 +151,7 @@
 			/* Mac address filled in by bootwrapper */
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			phy-handle = <&PHY1>;
 		};
 
@@ -121,11 +163,11 @@
 			/* Mac address filled in by bootwrapper */
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
-			interrupt-parent = <&MPIC>;
+			interrupt-parent = <&mpic>;
 			phy-handle = <&PHY2>;
 		};
 
-		MPIC: pic@40000 {
+		mpic: pic@40000 {
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
@@ -164,7 +206,7 @@
 				#interrupt-cells = <2>;
 				interrupt-controller;
 				interrupts = <0x2e 0x2>;
-				interrupt-parent = <&MPIC>;
+				interrupt-parent = <&mpic>;
 				reg = <0x90c00 0x80>;
 				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
 			};
@@ -202,7 +244,7 @@
 				fsl,mdc-pin = <25>;
 
 				PHY0: ethernet-phy@0 {
-					interrupt-parent = <&MPIC>;
+					interrupt-parent = <&mpic>;
 					reg = <0x0>;
 					device_type = "ethernet-phy";
 				};
diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts
index 84cc5e72ddd8..945508c7e7d8 100644
--- a/arch/powerpc/boot/dts/makalu.dts
+++ b/arch/powerpc/boot/dts/makalu.dts
@@ -8,12 +8,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "amcc,makalu";
 	compatible = "amcc,makalu";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405EX";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 			timebase-frequency = <0>; /* Filled in by U-Boot */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>; /* 16 kB */
-			d-cache-size = <4000>; /* 16 kB */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>; /* 16 kB */
+			d-cache-size = <16384>; /* 16 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by U-Boot */
+		reg = <0x00000000 0x00000000>; /* Filled in by U-Boot */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic-405ex", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -60,11 +62,11 @@
 		compatible = "ibm,uic-405ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -72,11 +74,11 @@
 		compatible = "ibm,uic-405ex","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -89,72 +91,72 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405ex";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-405ex", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405ex", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <80000000 80000000 10000000
-				  ef600000 ef600000 a00000
-				  f0000000 f0000000 10000000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0x80000000 0x80000000 0x10000000
+				  0xef600000 0xef600000 0x00a00000
+				  0xf0000000 0xf0000000 0x10000000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by U-Boot */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-405ex", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				/* ranges property is supplied by U-Boot */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl512n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "kernel";
-						reg = <0 200000>;
+						reg = <0x00000000 0x00200000>;
 					};
 					partition@200000 {
 						label = "root";
-						reg = <200000 200000>;
+						reg = <0x00200000 0x00200000>;
 					};
 					partition@400000 {
 						label = "user";
-						reg = <400000 3b60000>;
+						reg = <0x00400000 0x03b60000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 			};
@@ -162,68 +164,68 @@
 			UART0: serial@ef600200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600200 8>;
-				virtual-reg = <ef600200>;
+				reg = <0xef600200 0x00000008>;
+				virtual-reg = <0xef600200>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1a 4>;
+				interrupts = <0x1a 0x4>;
 			};
 
 			UART1: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by U-Boot */
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@ef600400 {
 				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <ef600400 14>;
+				reg = <0xef600400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600500 {
 				compatible = "ibm,iic-405ex", "ibm,iic";
-				reg = <ef600500 14>;
+				reg = <0xef600500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 
 			RGMII0: emac-rgmii@ef600b00 {
 				compatible = "ibm,rgmii-405ex", "ibm,rgmii";
-				reg = <ef600b00 104>;
+				reg = <0xef600b00 0x00000104>;
 				has-mdio;
 			};
 
 			EMAC0: ethernet@ef600900 {
-				linux,network-index = <0>;
+				linux,network-index = <0x0>;
 				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600900 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600900 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <0000003f>;	/* Start at 6 */
+				phy-map = <0x0000003f>;	/* Start at 6 */
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
 				has-inverted-stacr-oc;
@@ -231,27 +233,27 @@
 			};
 
 			EMAC1: ethernet@ef600a00 {
-				linux,network-index = <1>;
+				linux,network-index = <0x1>;
 				device_type = "network";
-				compatible = "ibm,emac-405ex", "ibm,emac4";
+				compatible = "ibm,emac-405ex", "ibm,emac4sync";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 19 4
-						/*Wake*/  1 &UIC1 1f 4>;
-				reg = <ef600a00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600a00 0x000000c4>;
 				local-mac-address = [000000000000]; /* Filled in by U-Boot */
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
 				has-inverted-stacr-oc;
@@ -266,23 +268,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <0>; /* port number */
-			reg = <a0000000 20000000	/* Config space access */
-			       ef000000 00001000>;	/* Registers */
-			dcr-reg = <040 020>;
-			sdr-base = <400>;
+			port = <0x0>; /* port number */
+			reg = <0xa0000000 0x20000000	/* Config space access */
+			       0xef000000 0x00001000>;	/* Registers */
+			dcr-reg = <0x040 0x020>;
+			sdr-base = <0x400>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 90000000 0 08000000
-				  01000000 0 00000000 e0000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x90000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x00 to 0x3f */
-			bus-range = <00 3f>;
+			bus-range = <0x0 0x3f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -292,12 +294,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 0 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 1 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 2 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 3 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0x0 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0x1 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0x2 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0x3 0x4 /* swizzled int D */>;
 		};
 
 		PCIE1: pciex@0c0000000 {
@@ -307,23 +309,23 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
 			primary;
-			port = <1>; /* port number */
-			reg = <c0000000 20000000	/* Config space access */
-			       ef001000 00001000>;	/* Registers */
-			dcr-reg = <060 020>;
-			sdr-base = <440>;
+			port = <0x1>; /* port number */
+			reg = <0xc0000000 0x20000000	/* Config space access */
+			       0xef001000 0x00001000>;	/* Registers */
+			dcr-reg = <0x060 0x020>;
+			sdr-base = <0x440>;
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 98000000 0 08000000
-				  01000000 0 00000000 e0010000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x98000000 0x00000000 0x08000000
+				  0x01000000 0x00000000 0x00000000 0xe0010000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* This drives busses 0x40 to 0x7f */
-			bus-range = <40 7f>;
+			bus-range = <0x40 0x7f>;
 
 			/* Legacy interrupts (note the weird polarity, the bridge seems
 			 * to invert PCIe legacy interrupts).
@@ -333,12 +335,12 @@
 			 * below are basically de-swizzled numbers.
 			 * The real slot is on idsel 0, so the swizzling is 1:1
 			 */
-			interrupt-map-mask = <0000 0 0 7>;
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
 			interrupt-map = <
-				0000 0 0 1 &UIC2 b 4 /* swizzled int A */
-				0000 0 0 2 &UIC2 c 4 /* swizzled int B */
-				0000 0 0 3 &UIC2 d 4 /* swizzled int C */
-				0000 0 0 4 &UIC2 e 4 /* swizzled int D */>;
+				0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
+				0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
+				0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
+				0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts
index 94ad7b2b241e..1f9036c317b4 100644
--- a/arch/powerpc/boot/dts/mpc5121ads.dts
+++ b/arch/powerpc/boot/dts/mpc5121ads.dts
@@ -1,7 +1,7 @@
 /*
- * MPC5121E MDS Device Tree Source
+ * MPC5121E ADS Device Tree Source
  *
- * Copyright 2007 Freescale Semiconductor Inc.
+ * Copyright 2007,2008 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -17,6 +17,10 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		pci = &pci;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -39,8 +43,41 @@
 		reg = <0x00000000 0x10000000>;	// 256MB at 0
 	};
 
+	mbx@20000000 {
+		compatible = "fsl,mpc5121-mbx";
+		reg = <0x20000000 0x4000>;
+		interrupts = <66 0x8>;
+		interrupt-parent = < &ipic >;
+	};
+
+	sram@30000000 {
+		compatible = "fsl,mpc5121-sram";
+		reg = <0x30000000 0x20000>;		// 128K at 0x30000000
+	};
+
+	nfc@40000000 {
+		compatible = "fsl,mpc5121-nfc";
+		reg = <0x40000000 0x100000>;	// 1M at 0x40000000
+		interrupts = <6 8>;
+		interrupt-parent = < &ipic >;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <1>;
+		// ADS has two Hynix 512MB Nand flash chips in a single
+		// stacked package .
+		chips = <2>;
+		nand0@0 {
+			label = "nand0";
+			reg = <0x00000000 0x02000000>; 	// first 32 MB of chip 0
+		};
+		nand1@20000000 {
+			label = "nand1";
+			reg = <0x20000000 0x02000000>; 	// first 32 MB of chip 1
+		};
+	};
+
 	localbus@80000020 {
-		compatible = "fsl,mpc5121ads-localbus";
+		compatible = "fsl,mpc5121-localbus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		reg = <0x80000020 0x40>;
@@ -51,14 +88,51 @@
 		flash@0,0 {
 			compatible = "cfi-flash";
 			reg = <0 0x0 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			bank-width = <4>;
-			device-width = <1>;
+			device-width = <2>;
+			protected@0 {
+				label = "protected";
+				reg = <0x00000000 0x00040000>;  // first sector is protected
+				read-only;
+			};
+			filesystem@40000 {
+				label = "filesystem";
+				reg = <0x00040000 0x03c00000>;  // 60M for filesystem
+			};
+			kernel@3c40000 {
+				label = "kernel";
+				reg = <0x03c40000 0x00280000>;  // 2.5M for kernel
+			};
+			device-tree@3ec0000 {
+				label = "device-tree";
+				reg = <0x03ec0000 0x00040000>;  // one sector for device tree
+			};
+			u-boot@3f00000 {
+				label = "u-boot";
+				reg = <0x03f00000 0x00100000>;  // 1M for u-boot
+				read-only;
+			};
 		};
 
 		board-control@2,0 {
 			compatible = "fsl,mpc5121ads-cpld";
 			reg = <0x2 0x0 0x8000>;
 		};
+
+		cpld_pic: pic@2,a {
+			compatible = "fsl,mpc5121ads-cpld-pic";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			reg = <0x2 0xa 0x5>;
+			interrupt-parent = < &ipic >;
+			// irq routing
+			//	all irqs but touch screen are routed to irq0 (ipic 48)
+			//	touch screen is statically routed to irq1 (ipic 17)
+			//	so don't use it here
+			interrupts = <48 0x8>;
+		};
 	};
 
 	soc@80000000 {
@@ -85,38 +159,252 @@
 			reg = <0xc00 0x100>;
 		};
 
-		// 512x PSCs are not 52xx PSCs compatible
+		rtc@a00 {	// Real time clock
+			compatible = "fsl,mpc5121-rtc";
+			reg = <0xa00 0x100>;
+			interrupts = <79 0x8 80 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		clock@f00 {	// Clock control
+			compatible = "fsl,mpc5121-clock";
+			reg = <0xf00 0x100>;
+		};
+
+		pmc@1000{  //Power Management Controller
+			compatible = "fsl,mpc5121-pmc";
+			reg = <0x1000 0x100>;
+			interrupts = <83 0x2>;
+			interrupt-parent = < &ipic >;
+		};
+
+		gpio@1100 {
+			compatible = "fsl,mpc5121-gpio";
+			reg = <0x1100 0x100>;
+			interrupts = <78 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		mscan@1300 {
+			compatible = "fsl,mpc5121-mscan";
+			cell-index = <0>;
+			interrupts = <12 0x8>;
+			interrupt-parent = < &ipic >;
+			reg = <0x1300 0x80>;
+		};
+
+		mscan@1380 {
+			compatible = "fsl,mpc5121-mscan";
+			cell-index = <1>;
+			interrupts = <13 0x8>;
+			interrupt-parent = < &ipic >;
+			reg = <0x1380 0x80>;
+		};
+
+		i2c@1700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			cell-index = <0>;
+			reg = <0x1700 0x20>;
+			interrupts = <9 0x8>;
+			interrupt-parent = < &ipic >;
+			fsl5200-clocking;
+		};
+
+		i2c@1720 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			cell-index = <1>;
+			reg = <0x1720 0x20>;
+			interrupts = <10 0x8>;
+			interrupt-parent = < &ipic >;
+			fsl5200-clocking;
+		};
+
+		i2c@1740 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+			cell-index = <2>;
+			reg = <0x1740 0x20>;
+			interrupts = <11 0x8>;
+			interrupt-parent = < &ipic >;
+			fsl5200-clocking;
+		};
+
+		i2ccontrol@1760 {
+			compatible = "fsl,mpc5121-i2c-ctrl";
+			reg = <0x1760 0x8>;
+		};
+
+		axe@2000 {
+			compatible = "fsl,mpc5121-axe";
+			reg = <0x2000 0x100>;
+			interrupts = <42 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		display@2100 {
+			compatible = "fsl,mpc5121-diu", "fsl-diu";
+			reg = <0x2100 0x100>;
+			interrupts = <64 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		mdio@2800 {
+			compatible = "fsl,mpc5121-fec-mdio";
+			reg = <0x2800 0x800>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy: ethernet-phy@0 {
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@2800 {
+			device_type = "network";
+			compatible = "fsl,mpc5121-fec";
+			reg = <0x2800 0x800>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <4 0x8>;
+			interrupt-parent = < &ipic >;
+			phy-handle = < &phy >;
+			fsl,align-tx-packets = <4>;
+		};
+
+		// 5121e has two dr usb modules
+		// mpc5121_ads only uses USB0
+
+		// USB1 using external ULPI PHY
+		//usb@3000 {
+		//	compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+		//	reg = <0x3000 0x1000>;
+		//	#address-cells = <1>;
+		//	#size-cells = <0>;
+		//	interrupt-parent = < &ipic >;
+		//	interrupts = <43 0x8>;
+		//	dr_mode = "otg";
+		//	phy_type = "ulpi";
+		//	port1;
+		//};
+
+		// USB0 using internal UTMI PHY
+		usb@4000 {
+			compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr";
+			reg = <0x4000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = < &ipic >;
+			interrupts = <44 0x8>;
+			dr_mode = "otg";
+			phy_type = "utmi_wide";
+			port0;
+		};
+
+		// IO control
+		ioctl@a000 {
+			compatible = "fsl,mpc5121-ioctl";
+			reg = <0xA000 0x1000>;
+		};
+
+		pata@10200 {
+			compatible = "fsl,mpc5121-pata";
+			reg = <0x10200 0x100>;
+			interrupts = <5 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+		// 512x PSCs are not 52xx PSC compatible
 		// PSC3 serial port A aka ttyPSC0
 		serial@11300 {
 			device_type = "serial";
-			compatible = "fsl,mpc5121-psc-uart";
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
 			// Logical port assignment needed until driver
 			// learns to use aliases
 			port-number = <0>;
 			cell-index = <3>;
 			reg = <0x11300 0x100>;
-			interrupts = <0x28 0x8>; // actually the fifo irq
+			interrupts = <40 0x8>;
 			interrupt-parent = < &ipic >;
+			rx-fifo-size = <16>;
+			tx-fifo-size = <16>;
 		};
 
 		// PSC4 serial port B aka ttyPSC1
 		serial@11400 {
 			device_type = "serial";
-			compatible = "fsl,mpc5121-psc-uart";
+			compatible = "fsl,mpc5121-psc-uart", "fsl,mpc5121-psc";
 			// Logical port assignment needed until driver
 			// learns to use aliases
 			port-number = <1>;
 			cell-index = <4>;
 			reg = <0x11400 0x100>;
-			interrupts = <0x28 0x8>; // actually the fifo irq
+			interrupts = <40 0x8>;
 			interrupt-parent = < &ipic >;
+			rx-fifo-size = <16>;
+			tx-fifo-size = <16>;
 		};
 
-		pscsfifo@11f00 {
+		// PSC5 in ac97 mode
+		ac97@11500 {
+			compatible = "fsl,mpc5121-psc-ac97", "fsl,mpc5121-psc";
+			cell-index = <5>;
+			reg = <0x11500 0x100>;
+			interrupts = <40 0x8>;
+			interrupt-parent = < &ipic >;
+			fsl,mode = "ac97-slave";
+			rx-fifo-size = <384>;
+			tx-fifo-size = <384>;
+		};
+
+		pscfifo@11f00 {
 			compatible = "fsl,mpc5121-psc-fifo";
 			reg = <0x11f00 0x100>;
-			interrupts = <0x28 0x8>;
+			interrupts = <40 0x8>;
 			interrupt-parent = < &ipic >;
 		};
+
+		dma@14000 {
+			compatible = "fsl,mpc5121-dma2";
+			reg = <0x14000 0x1800>;
+			interrupts = <65 0x8>;
+			interrupt-parent = < &ipic >;
+		};
+
+	};
+
+	pci: pci@80008500 {
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				// IDSEL 0x15 - Slot 1 PCI
+				 0xa800 0x0 0x0 0x1 &cpld_pic 0x0 0x8
+				 0xa800 0x0 0x0 0x2 &cpld_pic 0x1 0x8
+				 0xa800 0x0 0x0 0x3 &cpld_pic 0x2 0x8
+				 0xa800 0x0 0x0 0x4 &cpld_pic 0x3 0x8
+
+				// IDSEL 0x16 - Slot 2 MiniPCI
+				 0xb000 0x0 0x0 0x1 &cpld_pic 0x4 0x8
+				 0xb000 0x0 0x0 0x2 &cpld_pic 0x5 0x8
+
+				// IDSEL 0x17 - Slot 3 MiniPCI
+				 0xb800 0x0 0x0 0x1 &cpld_pic 0x6 0x8
+				 0xb800 0x0 0x0 0x2 &cpld_pic 0x7 0x8
+				>;
+		interrupt-parent = < &ipic >;
+		interrupts = <1 0x8>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0x84000000 0x0 0x01000000>;
+		clock-frequency = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0x80008500 0x100>;
+		compatible = "fsl,mpc5121-pci";
+		device_type = "pci";
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts
index 4936349b87cd..2544f3ecd6e9 100644
--- a/arch/powerpc/boot/dts/mpc7448hpc2.dts
+++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts
@@ -18,6 +18,16 @@
 	#address-cells = <1>;
 	#size-cells = <1>;
 
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+
+		pci0 = &pci0;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells =<0>;
@@ -78,7 +88,7 @@
 
 		};
 
-		ethernet@6200 {
+		enet0: ethernet@6200 {
 			linux,network-index = <0>;
 			#size-cells = <0>;
 			device_type = "network";
@@ -91,7 +101,7 @@
 			phy-handle = <&phy8>;
 		};
 
-		ethernet@6600 {
+		enet1: ethernet@6600 {
 			linux,network-index = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -105,7 +115,7 @@
 			phy-handle = <&phy9>;
 		};
 
-		serial@7808 {
+		serial0: serial@7808 {
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <0x7808 0x200>;
@@ -114,7 +124,7 @@
 			interrupt-parent = <&mpic>;
 		};
 
-		serial@7c08 {
+		serial1: serial@7c08 {
 			device_type = "serial";
 			compatible = "ns16550";
 			reg = <0x7c08 0x200>;
@@ -124,16 +134,14 @@
 		};
 
 	  	mpic: pic@7400 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x7400 0x400>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                       	big-endian;
 		};
-		pci@1000 {
+		pci0: pci@1000 {
 			compatible = "tsi108-pci";
 			device_type = "pci";
 			#interrupt-cells = <1>;
@@ -186,8 +194,4 @@
 			};
 		};
 	};
-	chosen {
-		linux,stdout-path = "/tsi108@c0000000/serial@7808";
-	};
-
 };
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 46e2da30c3dd..2a1929acaabd 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -217,6 +217,17 @@
 				linux,network-index = <1>;
 				fsl,cpm-command = <0x16200300>;
 			};
+
+			i2c@11860 {
+				compatible = "fsl,mpc8272-i2c",
+					     "fsl,cpm2-i2c";
+				reg = <0x11860 0x20 0x8afc 0x2>;
+				interrupts = <1 8>;
+				interrupt-parent = <&PIC>;
+				fsl,cpm-command = <0x29600000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		PIC: interrupt-controller@10c00 {
@@ -226,22 +237,15 @@
 			compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic";
 		};
 
-/* May need to remove if on a part without crypto engine */
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "fsl,mpc8272-talitos-sec2",
-			             "fsl,talitos-sec2",
-			             "fsl,talitos",
-			             "talitos";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 8>;
+			compatible = "fsl,sec1.0";
+			reg = <0x40000 0x13000>;
+			interrupts = <47 0x8>;
 			interrupt-parent = <&PIC>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x7e>;
-/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
-			descriptor-types-mask = <0x1010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x1010415>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index e1f0dca8ac39..2a94ae0dc8b8 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -109,18 +109,38 @@
 			reg = <0x200 0x100>;
 		};
 
-		i2c@3000 {
+		sleep-nexus {
 			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <14 0x8>;
-			interrupt-parent = <&ipic>;
-			dfsrr;
-			rtc@68 {
-				compatible = "dallas,ds1339";
-				reg = <0x68>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			sleep = <&pmc 0x03000000>;
+			ranges;
+
+			i2c@3000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				compatible = "fsl-i2c";
+				reg = <0x3000 0x100>;
+				interrupts = <14 0x8>;
+				interrupt-parent = <&ipic>;
+				dfsrr;
+				rtc@68 {
+					compatible = "dallas,ds1339";
+					reg = <0x68>;
+				};
+			};
+
+			crypto@30000 {
+				compatible = "fsl,sec2.2", "fsl,sec2.1",
+				             "fsl,sec2.0";
+				reg = <0x30000 0x10000>;
+				interrupts = <11 0x8>;
+				interrupt-parent = <&ipic>;
+				fsl,num-channels = <1>;
+				fsl,channel-fifo-len = <24>;
+				fsl,exec-units-mask = <0x4c>;
+				fsl,descriptor-types-mask = <0x0122003f>;
 			};
 		};
 
@@ -144,6 +164,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8313-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
@@ -153,37 +208,44 @@
 			interrupt-parent = <&ipic>;
 			interrupts = <38 0x8>;
 			phy_type = "utmi_wide";
+			sleep = <&pmc 0x00300000>;
 		};
 
-		mdio@24520 {
+		enet0: ethernet@24000 {
 			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,gianfar-mdio";
-			reg = <0x24520 0x20>;
-			phy1: ethernet-phy@1 {
-				interrupt-parent = <&ipic>;
-				interrupts = <19 0x8>;
-				reg = <0x1>;
-				device_type = "ethernet-phy";
-			};
-			phy4: ethernet-phy@4 {
-				interrupt-parent = <&ipic>;
-				interrupts = <20 0x8>;
-				reg = <0x4>;
-				device_type = "ethernet-phy";
-			};
-		};
+			#size-cells = <1>;
+			sleep = <&pmc 0x20000000>;
+			ranges;
 
-		enet0: ethernet@24000 {
 			cell-index = <0>;
 			device_type = "network";
 			model = "eTSEC";
-			compatible = "gianfar";
+			compatible = "gianfar", "simple-bus";
 			reg = <0x24000 0x1000>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
 			interrupts = <37 0x8 36 0x8 35 0x8>;
 			interrupt-parent = <&ipic>;
 			phy-handle = < &phy1 >;
+			fsl,magic-packet;
+
+			mdio@24520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x24520 0x20>;
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&ipic>;
+					interrupts = <19 0x8>;
+					reg = <0x1>;
+					device_type = "ethernet-phy";
+				};
+				phy4: ethernet-phy@4 {
+					interrupt-parent = <&ipic>;
+					interrupts = <20 0x8>;
+					reg = <0x4>;
+					device_type = "ethernet-phy";
+				};
+			};
 		};
 
 		enet1: ethernet@25000 {
@@ -196,6 +258,8 @@
 			interrupts = <34 0x8 33 0x8 32 0x8>;
 			interrupt-parent = <&ipic>;
 			phy-handle = < &phy4 >;
+			sleep = <&pmc 0x10000000>;
+			fsl,magic-packet;
 		};
 
 		serial0: serial@4500 {
@@ -218,20 +282,6 @@
 			interrupt-parent = <&ipic>;
 		};
 
-		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
-			reg = <0x30000 0x7000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			/* Rev. 2.2 */
-			num-channels = <1>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000004c>;
-			descriptor-types-mask = <0x0122003f>;
-		};
-
 		/* IPIC
 		 * interrupts cell = <intr #, sense>
 		 * sense values match linux IORESOURCE_IRQ_* defines:
@@ -245,36 +295,119 @@
 			reg = <0x700 0x100>;
 			device_type = "ipic";
 		};
+
+		pmc: power@b00 {
+			compatible = "fsl,mpc8313-pmc", "fsl,mpc8349-pmc";
+			reg = <0xb00 0x100 0xa00 0x100>;
+			interrupts = <80 8>;
+			interrupt-parent = <&ipic>;
+			fsl,mpc8313-wakeup-timer = <&gtm1>;
+
+			/* Remove this (or change to "okay") if you have
+			 * a REVA3 or later board, if you apply one of the
+			 * workarounds listed in section 8.5 of the board
+			 * manual, or if you are adapting this device tree
+			 * to a different board.
+			 */
+			status = "fail";
+		};
+
+		gtm1: timer@500 {
+			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+			reg = <0x500 0x100>;
+			interrupts = <90 8 78 8 84 8 72 8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		timer@600 {
+			compatible = "fsl,mpc8313-gtm", "fsl,gtm";
+			reg = <0x600 0x100>;
+			interrupts = <91 8 79 8 85 8 73 8>;
+			interrupt-parent = <&ipic>;
+		};
 	};
 
-	pci0: pci@e0008500 {
-		cell-index = <1>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-				/* IDSEL 0x0E -mini PCI */
-				 0x7000 0x0 0x0 0x1 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x2 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x3 &ipic 18 0x8
-				 0x7000 0x0 0x0 0x4 &ipic 18 0x8
-
-				/* IDSEL 0x0F - PCI slot */
-				 0x7800 0x0 0x0 0x1 &ipic 17 0x8
-				 0x7800 0x0 0x0 0x2 &ipic 18 0x8
-				 0x7800 0x0 0x0 0x3 &ipic 17 0x8
-				 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
-		interrupt-parent = <&ipic>;
-		interrupts = <66 0x8>;
-		bus-range = <0x0 0x0>;
-		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
-			  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008500 0x100>;
-		compatible = "fsl,mpc8349-pci";
-		device_type = "pci";
+	sleep-nexus {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		sleep = <&pmc 0x00010000>;
+		ranges;
+
+		pci0: pci@e0008500 {
+			cell-index = <1>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+			interrupt-map = <
+					/* IDSEL 0x0E -mini PCI */
+					 0x7000 0x0 0x0 0x1 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x2 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x3 &ipic 18 0x8
+					 0x7000 0x0 0x0 0x4 &ipic 18 0x8
+
+					/* IDSEL 0x0F - PCI slot */
+					 0x7800 0x0 0x0 0x1 &ipic 17 0x8
+					 0x7800 0x0 0x0 0x2 &ipic 18 0x8
+					 0x7800 0x0 0x0 0x3 &ipic 17 0x8
+					 0x7800 0x0 0x0 0x4 &ipic 18 0x8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <66 0x8>;
+			bus-range = <0x0 0x0>;
+			ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
+				  0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
+				  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+			clock-frequency = <66666666>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <0xe0008500 0x100>;
+			compatible = "fsl,mpc8349-pci";
+			device_type = "pci";
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8313-dma", "fsl,elo-dma";
+			reg = <0xe00082a8 4>;
+			ranges = <0 0xe0008100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+
+			dma-channel@0 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <0>;
+			};
+
+			dma-channel@80 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x80 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <1>;
+			};
+
+			dma-channel@100 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x100 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <2>;
+			};
+
+			dma-channel@180 {
+				compatible = "fsl,mpc8313-dma-channel",
+				             "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+				cell-index = <3>;
+			};
+		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index d7a1ececa30f..f704513fb930 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -132,6 +132,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -206,17 +241,16 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			device_type = "crypto";
-			compatible = "talitos";
+			compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
+				     "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
+				     "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x97c>;
+			fsl,descriptor-types-mask = <0x3ab0abf>;
 		};
 
 		sata@18000 {
diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 539e02fb3526..fbc930410ff6 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -68,6 +68,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <132000000>;
@@ -114,18 +115,50 @@
 			interrupt-parent = <&ipic>;
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
-			reg = <0x30000 0x7000>;
+			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 2.2 */
-			num-channels = <1>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000004c>;
-			descriptor-types-mask = <0x0122003f>;
+			fsl,num-channels = <1>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x4c>;
+			fsl,descriptor-types-mask = <0x0122003f>;
 		};
 
 		ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 179c81c6a7ac..b157d1885a28 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -51,6 +51,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
@@ -68,7 +69,7 @@
 			compatible = "fsl-i2c";
 			reg = <0x3000 0x100>;
 			interrupts = <14 0x8>;
-			interrupt-parent = <&pic>;
+			interrupt-parent = <&ipic>;
 			dfsrr;
 		};
 
@@ -79,7 +80,7 @@
 			reg = <0x4500 0x100>;
 			clock-frequency = <0>;
 			interrupts = <9 0x8>;
-			interrupt-parent = <&pic>;
+			interrupt-parent = <&ipic>;
 		};
 
 		serial1: serial@4600 {
@@ -89,24 +90,56 @@
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
 			interrupts = <10 0x8>;
-			interrupt-parent = <&pic>;
+			interrupt-parent = <&ipic>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
-			reg = <0x30000 0x7000>;
+			compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
-			interrupt-parent = <&pic>;
-			/* Rev. 2.2 */
-			num-channels = <1>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000004c>;
-			descriptor-types-mask = <0x0122003f>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <1>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x4c>;
+			fsl,descriptor-types-mask = <0x0122003f>;
 		};
 
-		pic:pic@700 {
+		ipic:pic@700 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
@@ -240,13 +273,13 @@
 			compatible = "fsl,ucc-mdio";
 
 			phy00:ethernet-phy@00 {
-				interrupt-parent = <&pic>;
+				interrupt-parent = <&ipic>;
 				interrupts = <0>;
 				reg = <0x0>;
 				device_type = "ethernet-phy";
 			};
 			phy04:ethernet-phy@04 {
-				interrupt-parent = <&pic>;
+				interrupt-parent = <&ipic>;
 				interrupts = <0>;
 				reg = <0x4>;
 				device_type = "ethernet-phy";
@@ -261,7 +294,7 @@
 			reg = <0x80 0x80>;
 			big-endian;
 			interrupts = <32 0x8 33 0x8>; //high:32 low:33
-			interrupt-parent = <&pic>;
+			interrupt-parent = <&ipic>;
 		};
 	};
 
@@ -270,21 +303,21 @@
 		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 		interrupt-map = <
 				/* IDSEL 0x10 AD16 (USB) */
-				 0x8000 0x0 0x0 0x1 &pic 17 0x8
+				 0x8000 0x0 0x0 0x1 &ipic 17 0x8
 
 				/* IDSEL 0x11 AD17 (Mini1)*/
-				 0x8800 0x0 0x0 0x1 &pic 18 0x8
-				 0x8800 0x0 0x0 0x2 &pic 19 0x8
-				 0x8800 0x0 0x0 0x3 &pic 20 0x8
-				 0x8800 0x0 0x0 0x4 &pic 48 0x8
+				 0x8800 0x0 0x0 0x1 &ipic 18 0x8
+				 0x8800 0x0 0x0 0x2 &ipic 19 0x8
+				 0x8800 0x0 0x0 0x3 &ipic 20 0x8
+				 0x8800 0x0 0x0 0x4 &ipic 48 0x8
 
 				/* IDSEL 0x12 AD18 (PCI/Mini2) */
-				 0x9000 0x0 0x0 0x1 &pic 19 0x8
-				 0x9000 0x0 0x0 0x2 &pic 20 0x8
-				 0x9000 0x0 0x0 0x3 &pic 48 0x8
-				 0x9000 0x0 0x0 0x4 &pic 17 0x8>;
+				 0x9000 0x0 0x0 0x1 &ipic 19 0x8
+				 0x9000 0x0 0x0 0x2 &ipic 20 0x8
+				 0x9000 0x0 0x0 0x3 &ipic 48 0x8
+				 0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
 
-		interrupt-parent = <&pic>;
+		interrupt-parent = <&ipic>;
 		interrupts = <66 0x8>;
 		bus-range = <0x0 0x0>;
 		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 9426676b0b7d..700e076ef3f5 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -52,6 +52,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;                    // from bootloader
@@ -93,6 +94,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@22000 {
 			compatible = "fsl-usb2-mph";
 			reg = <0x22000 0x1000>;
@@ -178,16 +214,14 @@
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index f81d735e6e72..cdd3063258ea 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -50,6 +50,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;                    // from bootloader
@@ -91,6 +92,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -151,16 +187,14 @@
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index 0199c5c548d8..783241c00240 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -57,6 +57,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
@@ -103,6 +104,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		/* phy type (ULPI or SERIAL) are only types supported for MPH */
 		/* port = 0 or 1 */
 		usb@22000 {
@@ -193,20 +229,15 @@
 			interrupt-parent = <&ipic>;
 		};
 
-		/* May need to remove if on a part without crypto engine */
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			/* desc mask is for rev2.0,
-			 * we need runtime fixup for >2.0 */
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		/* IPIC
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 8160ff24e87e..a3b76a709951 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -61,6 +61,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <264000000>;
@@ -118,18 +119,50 @@
 			interrupt-parent = <&ipic>;
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			/* desc mask is for rev1.x, we need runtime fixup for >=2.x */
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		ipic: pic@700 {
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
new file mode 100644
index 000000000000..89c9202f8bd7
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -0,0 +1,428 @@
+/*
+ * MPC8360E RDK Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,mpc8360rdk";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8360@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <32768>;
+			i-cache-size = <32768>;
+			/* filled by u-boot */
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		/* filled by u-boot */
+		reg = <0 0>;
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8360-immr", "fsl,immr", "fsl,soc",
+			     "simple-bus";
+		ranges = <0 0xe0000000 0x200000>;
+		reg = <0xe0000000 0x200>;
+		/* filled by u-boot */
+		bus-frequency = <0>;
+
+		wdt@200 {
+			compatible = "mpc83xx_wdt";
+			reg = <0x200 0x100>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <14 8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <16 8>;
+			interrupt-parent = <&ipic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			interrupts = <9 8>;
+			interrupt-parent = <&ipic>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+		};
+
+		serial1: serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			interrupts = <10 8>;
+			interrupt-parent = <&ipic>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+		};
+
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
+		ipic: interrupt-controller@700 {
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			compatible = "fsl,pq2pro-pic", "fsl,ipic";
+			interrupt-controller;
+			reg = <0x700 0x100>;
+		};
+
+		qe_pio_b: gpio-controller@1418 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8360-qe-pario-bank",
+				     "fsl,mpc8323-qe-pario-bank";
+			reg = <0x1418 0x18>;
+			gpio-controller;
+		};
+
+		qe_pio_e: gpio-controller@1460 {
+			#gpio-cells = <2>;
+			compatible = "fsl,mpc8360-qe-pario-bank",
+				     "fsl,mpc8323-qe-pario-bank";
+			reg = <0x1460 0x18>;
+			gpio-controller;
+		};
+
+		qe@100000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			device_type = "qe";
+			compatible = "fsl,qe", "simple-bus";
+			ranges = <0 0x100000 0x100000>;
+			reg = <0x100000 0x480>;
+			/* filled by u-boot */
+			clock-frequency = <0>;
+			bus-frequency = <0>;
+			brg-frequency = <0>;
+
+			muram@10000 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "fsl,qe-muram", "fsl,cpm-muram";
+				ranges = <0 0x10000 0xc000>;
+
+				data-only@0 {
+					compatible = "fsl,qe-muram-data",
+						     "fsl,cpm-muram-data";
+					reg = <0 0xc000>;
+				};
+			};
+
+			timer@440 {
+				compatible = "fsl,mpc8360-qe-gtm",
+					     "fsl,qe-gtm", "fsl,gtm";
+				reg = <0x440 0x40>;
+				interrupts = <12 13 14 15>;
+				interrupt-parent = <&qeic>;
+				/* filled by u-boot */
+				clock-frequency = <0>;
+			};
+
+			spi@4c0 {
+				cell-index = <0>;
+				compatible = "fsl,spi";
+				reg = <0x4c0 0x40>;
+				interrupts = <2>;
+				interrupt-parent = <&qeic>;
+				mode = "cpu-qe";
+			};
+
+			spi@500 {
+				cell-index = <1>;
+				compatible = "fsl,spi";
+				reg = <0x500 0x40>;
+				interrupts = <1>;
+				interrupt-parent = <&qeic>;
+				mode = "cpu-qe";
+			};
+
+			enet0: ucc@2000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <1>;
+				reg = <0x2000 0x200>;
+				interrupts = <32>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "none";
+				tx-clock-name = "clk9";
+				phy-handle = <&phy2>;
+				phy-connection-type = "rgmii-rxid";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet1: ucc@3000 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <2>;
+				reg = <0x3000 0x200>;
+				interrupts = <33>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "none";
+				tx-clock-name = "clk4";
+				phy-handle = <&phy4>;
+				phy-connection-type = "rgmii-rxid";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet2: ucc@2600 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <7>;
+				reg = <0x2600 0x200>;
+				interrupts = <42>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "clk20";
+				tx-clock-name = "clk19";
+				phy-handle = <&phy1>;
+				phy-connection-type = "mii";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			enet3: ucc@3200 {
+				device_type = "network";
+				compatible = "ucc_geth";
+				cell-index = <4>;
+				reg = <0x3200 0x200>;
+				interrupts = <35>;
+				interrupt-parent = <&qeic>;
+				rx-clock-name = "clk8";
+				tx-clock-name = "clk7";
+				phy-handle = <&phy3>;
+				phy-connection-type = "mii";
+				/* filled by u-boot */
+				local-mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			mdio@2120 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,ucc-mdio";
+				reg = <0x2120 0x18>;
+
+				phy1: ethernet-phy@1 {
+					device_type = "ethernet-phy";
+					compatible = "national,DP83848VV";
+					reg = <1>;
+				};
+
+				phy2: ethernet-phy@2 {
+					device_type = "ethernet-phy";
+					compatible = "broadcom,BCM5481UA2KMLG";
+					reg = <2>;
+				};
+
+				phy3: ethernet-phy@3 {
+					device_type = "ethernet-phy";
+					compatible = "national,DP83848VV";
+					reg = <3>;
+				};
+
+				phy4: ethernet-phy@4 {
+					device_type = "ethernet-phy";
+					compatible = "broadcom,BCM5481UA2KMLG";
+					reg = <4>;
+				};
+			};
+
+			serial2: ucc@2400 {
+				device_type = "serial";
+				compatible = "ucc_uart";
+				reg = <0x2400 0x200>;
+				cell-index = <5>;
+				port-number = <0>;
+				rx-clock-name = "brg7";
+				tx-clock-name = "brg8";
+				interrupts = <40>;
+				interrupt-parent = <&qeic>;
+				soft-uart;
+			};
+
+			serial3: ucc@3400 {
+				device_type = "serial";
+				compatible = "ucc_uart";
+				reg = <0x3400 0x200>;
+				cell-index = <6>;
+				port-number = <1>;
+				rx-clock-name = "brg13";
+				tx-clock-name = "brg14";
+				interrupts = <41>;
+				interrupt-parent = <&qeic>;
+				soft-uart;
+			};
+
+			qeic: interrupt-controller@80 {
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+				compatible = "fsl,qe-ic";
+				interrupt-controller;
+				reg = <0x80 0x80>;
+				big-endian;
+				interrupts = <32 8 33 8>;
+				interrupt-parent = <&ipic>;
+			};
+		};
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
+			     "simple-bus";
+		reg = <0xe0005000 0xd8>;
+		ranges = <0 0 0xff800000 0x0800000
+			  1 0 0x60000000 0x0001000
+			  2 0 0x70000000 0x4000000>;
+
+		flash@0,0 {
+			compatible = "intel,PC28F640P30T85", "cfi-flash";
+			reg = <0 0 0x800000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		display@2,0 {
+			device_type = "display";
+			compatible = "fujitsu,MB86277", "fujitsu,mint";
+			reg = <2 0 0x4000000>;
+			fujitsu,sh3;
+			little-endian;
+			/* filled by u-boot */
+			address = <0>;
+			depth = <0>;
+			width = <0>;
+			height = <0>;
+			linebytes = <0>;
+			/* linux,opened; - added by uboot */
+		};
+	};
+
+	pci0: pci@e0008500 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "fsl,mpc8360-pci", "fsl,mpc8349-pci";
+		reg = <0xe0008500 0x100>;
+		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
+			  0x42000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x01000000 0 0xe0300000 0xe0300000 0 0x00100000>;
+		interrupts = <66 8>;
+		interrupt-parent = <&ipic>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = </* miniPCI0 IDSEL 0x14 AD20 */
+				 0xa000 0 0 1 &ipic 18 8
+				 0xa000 0 0 2 &ipic 19 8
+
+				 /* PCI1 IDSEL 0x15 AD21 */
+				 0xa800 0 0 1 &ipic 19 8
+				 0xa800 0 0 2 &ipic 20 8
+				 0xa800 0 0 3 &ipic 21 8
+				 0xa800 0 0 4 &ipic 18 8>;
+		/* filled by u-boot */
+		bus-range = <0 0>;
+		clock-frequency = <0>;
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index fea592574004..432782b6d20a 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -117,6 +117,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
@@ -233,41 +234,6 @@
 			interrupt-parent = <&ipic>;
 		};
 
-		crypto@30000 {
-			model = "SEC3";
-			compatible = "talitos";
-			reg = <0x30000 0x10000>;
-			interrupts = <11 0x8>;
-			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
-		};
-
-		sdhc@2e000 {
-			model = "eSDHC";
-			compatible = "fsl,esdhc";
-			reg = <0x2e000 0x1000>;
-			interrupts = <42 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		sata@18000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x18000 0x1000>;
-			interrupts = <44 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
-		sata@19000 {
-			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
-			reg = <0x19000 0x1000>;
-			interrupts = <45 0x8>;
-			interrupt-parent = <&ipic>;
-		};
-
 		dma@82a8 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -303,6 +269,40 @@
 			};
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <11 0x8>;
+			interrupt-parent = <&ipic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		sdhc@2e000 {
+			model = "eSDHC";
+			compatible = "fsl,esdhc";
+			reg = <0x2e000 0x1000>;
+			interrupts = <42 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			interrupts = <44 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			interrupts = <45 0x8>;
+			interrupt-parent = <&ipic>;
+		};
+
 		/* IPIC
 		 * interrupts cell = <intr #, sense>
 		 * sense values match linux IORESOURCE_IRQ_* defines:
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index f3083c779b66..ed137aa83d5f 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -143,6 +143,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -213,17 +248,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			device_type = "crypto";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		sata@18000 {
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 1d6ea080ad73..ed32c8ddafe3 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -117,6 +117,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
@@ -157,6 +158,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -234,16 +270,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		sdhc@2e000 {
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 0e872a60e091..34a7f2f935e1 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -143,6 +143,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8378-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8378-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -213,17 +248,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			device_type = "crypto";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		/* IPIC
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index 6f78a9fd9826..f4db9ed4a301 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -117,6 +117,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00000200>;
 		bus-frequency = <0>;
@@ -157,6 +158,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -234,16 +270,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		sdhc@2e000 {
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 1eb8defaff6f..e4d7030d50e5 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -143,6 +143,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		usb@23000 {
 			compatible = "fsl-usb2-dr";
 			reg = <0x23000 0x1000>;
@@ -213,17 +248,15 @@
 		};
 
 		crypto@30000 {
-			model = "SEC3";
-			device_type = "crypto";
-			compatible = "talitos";
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			/* Rev. 3.0 geometry */
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x000001fe>;
-			descriptor-types-mask = <0x03ab0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
 		};
 
 		sata@18000 {
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
new file mode 100644
index 000000000000..1505d6855eff
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -0,0 +1,433 @@
+/*
+ * MPC8536 DS Device Tree Source
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,mpc8536ds";
+	compatible = "fsl,mpc8536ds";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+		pci3 = &pci3;
+	};
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8536@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 00000000>;	// Filled by U-Boot
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "simple-bus";
+		ranges = <0x0 0xffe00000 0x100000>;
+		reg = <0xffe00000 0x1000>;
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8536-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 0x2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8536-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <16 0x2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 0x2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+			rtc@68 {
+				compatible = "dallas,ds3232";
+				reg = <0x68>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8536-dma", "fsl,eloplus-dma";
+			reg = <0x21300 4>;
+			ranges = <0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <14 0x2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <15 0x2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <16 0x2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8536-dma-channel",
+					     "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <17 0x2>;
+			};
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <10 0x1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <10 0x1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		usb@22000 {
+			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+			reg = <0x22000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+		usb@23000 {
+			compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
+			reg = <0x23000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <46 0x2>;
+			phy_type = "ulpi";
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet1: ethernet@26000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		usb@2b000 {
+			compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
+			reg = <0x2b000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <&mpic>;
+			interrupts = <60 0x2>;
+			dr_mode = "peripheral";
+			phy_type = "ulpi";
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		sata@18000 {
+			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+			reg = <0x18000 0x1000>;
+			cell-index = <1>;
+			interrupts = <74 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		sata@19000 {
+			compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
+			reg = <0x19000 0x1000>;
+			cell-index = <2>;
+			interrupts = <41 0x2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+			big-endian;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8536-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
+	pci0: pci@ffe08000 {
+		cell-index = <0>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/* IDSEL 0x11 J17 Slot 1 */
+			0x8800 0 0 1 &mpic 1 1
+			0x8800 0 0 2 &mpic 2 1
+			0x8800 0 0 3 &mpic 3 1
+			0x8800 0 0 4 &mpic 4 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 0x2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xffc00000 0 0x00010000>;
+		clock-frequency = <66666666>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe08000 0x1000>;
+	};
+
+	pci1: pcie@ffe09000 {
+		cell-index = <1>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe09000 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0x98000000 0x98000000 0 0x08000000
+			  0x01000000 0 0x00000000 0xffc20000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 4 1
+			0000 0 0 2 &mpic 5 1
+			0000 0 0 3 &mpic 6 1
+			0000 0 0 4 &mpic 7 1
+			>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0x98000000
+				  0x02000000 0 0x98000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe0a000 {
+		cell-index = <2>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe0a000 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x08000000
+			  0x01000000 0 0x00000000 0xffc10000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 0 1
+			0000 0 0 2 &mpic 1 1
+			0000 0 0 3 &mpic 2 1
+			0000 0 0 4 &mpic 3 1
+			>;
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0x90000000
+				  0x02000000 0 0x90000000
+				  0 0x08000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe0b000 {
+		cell-index = <3>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xffe0b000 0x1000>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xffc30000 0 0x00010000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <27 0x2>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0 0 1 &mpic 8 1
+			0000 0 0 2 &mpic 9 1
+			0000 0 0 3 &mpic 10 1
+			0000 0 0 4 &mpic 11 1
+			>;
+
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xa0000000
+				  0x02000000 0 0xa0000000
+				  0 0x20000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00100000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 18033ed0b535..9568bfaff8f7 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -52,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x100000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
@@ -63,7 +65,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -83,6 +85,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -165,14 +208,12 @@
 			interrupt-parent = <&mpic>;
 		};
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 663c7c50ca45..6480f4fd96e0 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -52,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
@@ -63,7 +65,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8541-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -83,6 +85,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -147,15 +190,24 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 
 		cpm@919c0 {
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 6a0d8db96d97..f1fb20737e3e 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -41,6 +41,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -53,6 +54,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
@@ -65,7 +67,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8544-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -209,15 +211,40 @@
 			fsl,has-rstcr;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xfe>;
+			fsl,descriptor-types-mask = <0x12b0ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8544-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 4811b8107415..431b496270dc 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -45,6 +45,7 @@
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -57,6 +58,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR
 		bus-frequency = <0>;
@@ -68,7 +70,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8548-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -99,6 +101,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -207,15 +250,24 @@
 			fsl,has-rstcr;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xfe>;
+			fsl,descriptor-types-mask = <0x12b0ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index b025c566c10d..d833a5c4f476 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;	//  33 MHz, from uboot
 			bus-frequency = <0>;	// 166 MHz
 			clock-frequency = <0>;	// 825 MHz, from uboot
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -52,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;	// CCSRBAR 1M
 		bus-frequency = <0>;
@@ -63,7 +65,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8555-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -83,6 +85,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -147,15 +190,24 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 
 		cpm@919c0 {
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index 0cc16ab305d1..4d1f2f284094 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -53,6 +53,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x200>;
 		bus-frequency = <330000000>;
@@ -64,7 +65,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -73,6 +74,47 @@
 			interrupts = <16 2>;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -134,6 +176,7 @@
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
 			device_type = "open-pic";
 		};
 
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index a025a8ededc5..a15f10343f53 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -42,6 +42,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -59,6 +60,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xe0000000 0x100000>;
 		reg = <0xe0000000 0x1000>;
 		bus-frequency = <0>;
@@ -70,7 +72,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8568-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -106,6 +108,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8568-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8568-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8568-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8568-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8568-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -189,27 +232,23 @@
 		};
 
 		crypto@30000 {
-			device_type = "crypto";
-			model = "SEC2";
-			compatible = "talitos";
-			reg = <0x30000 0xf000>;
+			compatible = "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
 			interrupts = <45 2>;
 			interrupt-parent = <&mpic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0xfe>;
-			descriptor-types-mask = <0x12b0ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xfe>;
+			fsl,descriptor-types-mask = <0x12b0ebf>;
 		};
 
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 
 		par_io@e0100 {
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 66f27ab613a2..e124dd18fb5a 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -42,6 +42,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 
 		PowerPC,8572@1 {
@@ -54,6 +55,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -66,6 +68,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		device_type = "soc";
+		compatible = "simple-bus";
 		ranges = <0x0 0xffe00000 0x100000>;
 		reg = <0xffe00000 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
 		bus-frequency = <0>;		// Filled out by uboot.
@@ -84,7 +87,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,mpc8572-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;	// 32 bytes
@@ -115,6 +118,88 @@
 			dfsrr;
 		};
 
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8572-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -221,15 +306,41 @@
 			fsl,has-rstcr;
 		};
 
+		msi@41600 {
+			compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+				     "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index fa9b6bbeb5af..3b3a1062cb25 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -172,14 +172,28 @@
 		};
 
 		mpic: interrupt-controller@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
 		};
 
 		global-utilities@e0000 {
@@ -188,6 +202,11 @@
 			fsl,has-rstcr;
 		};
 
+		wdt@e4000 {
+			compatible = "fsl,mpc8610-wdt";
+			reg = <0xe4000 0x100>;
+		};
+
 		i2s@16000 {
 			compatible = "fsl,mpc8610-ssi";
 			cell-index = <0>;
@@ -349,7 +368,7 @@
 			0xe000 0 0 4 &mpic 1 1
 
 			/* IDSEL 0x1f */
-			0xf800 0 0 1 &mpic 3 0
+			0xf800 0 0 1 &mpic 3 2
 			0xf800 0 0 2 &mpic 0 1
 		>;
 
@@ -374,6 +393,20 @@
 					  0x01000000 0x0 0x00000000
 					  0x01000000 0x0 0x00000000
 					  0x0 0x00100000>;
+
+				isa@1e {
+					device_type = "isa";
+					#size-cells = <1>;
+					#address-cells = <2>;
+					reg = <0xf000 0 0 0 0>;
+					ranges = <1 0 0x01000000 0 0
+						  0x00001000>;
+
+					rtc@70 {
+						compatible = "pnpPNP,b00";
+						reg = <1 0x70 2>;
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 1e4bfe9cadb9..ae08761ffff1 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -134,6 +134,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -239,14 +280,12 @@
 		};
 
 		mpic: pic@40000 {
-			clock-frequency = <0>;
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-			big-endian;
 		};
 
 		global-utilities@e0000 {
diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts
index 765e43c997da..bd700651f360 100644
--- a/arch/powerpc/boot/dts/mpc866ads.dts
+++ b/arch/powerpc/boot/dts/mpc866ads.dts
@@ -171,6 +171,17 @@
 				fsl,cpm-command = <0000>;
 				linux,network-index = <1>;
 			};
+
+			i2c@860 {
+				compatible = "fsl,mpc866-i2c",
+					     "fsl,cpm1-i2c";
+				reg = <0x860 0x20 0x3c80 0x30>;
+				interrupts = <16>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index 9895043722b9..b123e9f7a5a8 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -215,6 +215,17 @@
 				fsl,cpm-command = <0x80>;
 				linux,network-index = <2>;
 			};
+
+			i2c@860 {
+				compatible = "fsl,mpc885-i2c",
+					     "fsl,cpm1-i2c";
+				reg = <0x860 0x20 0x3c80 0x30>;
+				interrupts = <16>;
+				interrupt-parent = <&CPM_PIC>;
+				fsl,cpm-command = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/ps3.dts b/arch/powerpc/boot/dts/ps3.dts
index 379ded282d5e..96ba5b512afe 100644
--- a/arch/powerpc/boot/dts/ps3.dts
+++ b/arch/powerpc/boot/dts/ps3.dts
@@ -18,6 +18,8 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+/dts-v1/;
+
 / {
 	model = "SonyPS3";
 	compatible = "sony,ps3";
@@ -34,7 +36,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0 0>;
+		reg = <0x00000000 0x00000000 0x00000000 0x00000000>;
 	};
 
 	/*
@@ -55,14 +57,14 @@
 
 		cpu@0 {
 			device_type = "cpu";
-			reg = <0>;
-			ibm,ppc-interrupt-server#s = <0 1>;
+			reg = <0x00000000>;
+			ibm,ppc-interrupt-server#s = <0x0 0x1>;
 			clock-frequency = <0>;
 			timebase-frequency = <0>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
-			i-cache-line-size = <80>;
-			d-cache-line-size = <80>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			i-cache-line-size = <128>;
+			d-cache-line-size = <128>;
 		};
 	};
 };
diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts
index 6a8fa7089ea2..9684c80e4093 100644
--- a/arch/powerpc/boot/dts/rainier.dts
+++ b/arch/powerpc/boot/dts/rainier.dts
@@ -12,12 +12,14 @@
  *
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,rainier";
 	compatible = "amcc,rainier";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -35,13 +37,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440GRx";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -49,14 +51,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440grx","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -66,11 +68,11 @@
 		compatible = "ibm,uic-440grx","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -78,22 +80,22 @@
 		compatible = "ibm,uic-440grx","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440grx", "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440grx", "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -105,80 +107,80 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440grx", "ibm,sdram-44x-ddr2denali";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440grx", "ibm,dma-4xx";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440grx", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
 		  	compatible = "ibm,opb-440grx", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-		  	ranges = <00000000 1 00000000 80000000
-			          80000000 1 80000000 80000000>;
+		  	ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+			          0x80000000 0x00000001 0x80000000 0x80000000>;
 		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <7 4>;
+		  	interrupts = <0x7 0x4>;
 		  	clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440grx", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl256n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "Kernel";
-						reg = <0 180000>;
+						reg = <0x00000000 0x00180000>;
 					};
 					partition@180000 {
 						label = "ramdisk";
-						reg = <180000 200000>;
+						reg = <0x00180000 0x00200000>;
 					};
 					partition@380000 {
 						label = "file system";
-						reg = <380000 3aa0000>;
+						reg = <0x00380000 0x03aa0000>;
 					};
 					partition@3e20000 {
 						label = "kozio";
-						reg = <3e20000 140000>;
+						reg = <0x03e20000 0x00140000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 
@@ -187,69 +189,69 @@
 			UART0: serial@ef600300 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600300 8>;
-		   		virtual-reg = <ef600300>;
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
 		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <1c200>;
+		   		current-speed = <115200>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
+		   		interrupts = <0x0 0x4>;
 	   		};
 
 			UART1: serial@ef600400 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600400 8>;
-		   		virtual-reg = <ef600400>;
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <1 4>;
+		   		interrupts = <0x1 0x4>;
 	   		};
 
 			UART2: serial@ef600500 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600500 8>;
-		   		virtual-reg = <ef600500>;
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <3 4>;
+		   		interrupts = <0x3 0x4>;
 	   		};
 
 			UART3: serial@ef600600 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600600 8>;
-		   		virtual-reg = <ef600600>;
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <4 4>;
+		   		interrupts = <0x4 0x4>;
 	   		};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440grx", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-440grx", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440grx", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@ef601000 {
 				compatible = "ibm,rgmii-440grx", "ibm,rgmii";
-				reg = <ef601000 8>;
+				reg = <0xef601000 0x00000008>;
 				has-mdio;
 			};
 
@@ -257,23 +259,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600e00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600e00 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 				rgmii-device = <&RGMII0>;
@@ -286,23 +288,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 19 4
-						/*Wake*/  1 &UIC1 1f 4>;
-				reg = <ef600f00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600f00 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 				rgmii-device = <&RGMII0>;
@@ -319,24 +321,25 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440grx-pci", "ibm,plb-pci";
 			primary;
-			reg = <1 eec00000 8	/* Config space access */
-			       1 eed00000 4	/* IACK */
-			       1 eed00000 4	/* Special cycle */
-			       1 ef400000 40>;	/* Internal registers */
+			reg = <0x00000001 0xeec00000 0x00000008	/* Config space access */
+			       0x00000001 0xeed00000 0x00000004	/* IACK */
+			       0x00000001 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000001 0xef400000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 80000000 1 80000000 0 10000000
-				01000000 0 00000000 1 e8000000 0 00100000>;
+			ranges = <0x02000000 0x0 0x80000000 0x1 0x80000000 0x0 0x40000000
+				0x01000000 0x0 0x00000000 0x1 0xe8000000 0x0 0x00010000
+				0x01000000 0x0 0x00000000 0x1 0xe8800000 0x0 0x03800000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* All PCI interrupts are routed to IRQ 67 */
-			interrupt-map-mask = <0000 0 0 0>;
-			interrupt-map = < 0000 0 0 0 &UIC2 3 8 >;
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/sam440ep.dts b/arch/powerpc/boot/dts/sam440ep.dts
new file mode 100644
index 000000000000..f0663be10421
--- /dev/null
+++ b/arch/powerpc/boot/dts/sam440ep.dts
@@ -0,0 +1,293 @@
+/*
+ * Device Tree Source for ACube Sam440ep  based off bamboo.dts code 
+ * original copyrights below 
+ *
+ * Copyright (c) 2006, 2007 IBM Corp.
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ *
+ * Modified from bamboo.dts for sam440ep:
+ * Copyright 2008 Giuseppe Coviello <gicoviello@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	model = "acube,sam440ep";
+	compatible = "acube,sam440ep";
+
+	aliases {
+		ethernet0 = &EMAC0;
+		ethernet1 = &EMAC1;
+		serial0 = &UART0;
+		serial1 = &UART1;
+		serial2 = &UART2;
+		serial3 = &UART3;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			model = "PowerPC,440EP";
+			reg = <0>;
+			clock-frequency = <0>; /* Filled in by zImage */
+			timebase-frequency = <0>; /* Filled in by zImage */
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			dcr-controller;
+			dcr-access-method = "native";
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0 0>; /* Filled in by zImage */
+	};
+
+	UIC0: interrupt-controller0 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <0>;
+		dcr-reg = <0x0c0 9>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+	};
+
+	UIC1: interrupt-controller1 {
+		compatible = "ibm,uic-440ep","ibm,uic";
+		interrupt-controller;
+		cell-index = <1>;
+		dcr-reg = <0x0d0 9>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		#interrupt-cells = <2>;
+		interrupts = <0x1e 4 0x1f 4>; /* cascade */
+		interrupt-parent = <&UIC0>;
+	};
+
+	SDR0: sdr {
+		compatible = "ibm,sdr-440ep";
+		dcr-reg = <0x00e 2>;
+	};
+
+	CPR0: cpr {
+		compatible = "ibm,cpr-440ep";
+		dcr-reg = <0x00c 2>;
+	};
+
+	plb {
+		compatible = "ibm,plb-440ep", "ibm,plb-440gp", "ibm,plb4";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+		clock-frequency = <0>; /* Filled in by zImage */
+
+		SDRAM0: sdram {
+			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
+			dcr-reg = <0x010 2>;
+		};
+
+		DMA0: dma {
+			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
+			dcr-reg = <0x100 0x027>;
+		};
+
+		MAL0: mcmal {
+			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
+			dcr-reg = <0x180 0x062>;
+			num-tx-chans = <4>;
+			num-rx-chans = <2>;
+			interrupt-parent = <&MAL0>;
+			interrupts = <0 1 2 3 4>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = </*TXEOB*/ 0 &UIC0 10 4
+					/*RXEOB*/ 1 &UIC0 11 4
+					/*SERR*/  2 &UIC1 0 4
+					/*TXDE*/  3 &UIC1 1 4
+					/*RXDE*/  4 &UIC1 2 4>;
+		};
+
+		POB0: opb {
+		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
+			 * bits.
+			 */
+		  	ranges = <0x00000000 0 0x00000000 0x80000000
+			          0x80000000 0 0x80000000 0x80000000>;
+		  	interrupt-parent = <&UIC1>;
+		  	interrupts = <7 4>;
+		  	clock-frequency = <0>; /* Filled in by zImage */
+
+			EBC0: ebc {
+				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
+				dcr-reg = <0x012 2>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				clock-frequency = <0>; /* Filled in by zImage */
+				interrupts = <5 1>;
+				interrupt-parent = <&UIC1>;
+			};
+
+			UART0: serial@ef600300 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600300 8>;
+		   		virtual-reg = <0xef600300>;
+		   		clock-frequency = <0>; /* Filled in by zImage */
+		   		current-speed = <0x1c200>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <0 4>;
+	   		};
+
+			UART1: serial@ef600400 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600400 8>;
+		   		virtual-reg = <0xef600400>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <1 4>;
+	   		};
+
+			UART2: serial@ef600500 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600500 8>;
+		   		virtual-reg = <0xef600500>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <3 4>;
+	   		};
+
+			UART3: serial@ef600600 {
+		   		device_type = "serial";
+		   		compatible = "ns16550";
+		   		reg = <0xef600600 8>;
+		   		virtual-reg = <0xef600600>;
+		   		clock-frequency = <0>;
+		   		current-speed = <0>;
+		   		interrupt-parent = <&UIC0>;
+		   		interrupts = <4 4>;
+	   		};
+
+			IIC0: i2c@ef600700 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				index = <0>;
+				reg = <0xef600700 0x14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <2 4>;
+				rtc@68 {
+					compatible = "stm,m41t80";
+					reg = <0x68>;
+				};
+			};
+
+			IIC1: i2c@ef600800 {
+				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
+				index = <5>;
+				reg = <0xef600800 0x14>;
+				interrupt-parent = <&UIC0>;
+				interrupts = <7 4>;
+			};
+
+			ZMII0: emac-zmii@ef600d00 {
+				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
+				reg = <0xef600d00 0xc>;
+			};
+
+			EMAC0: ethernet@ef600e00 {
+				linux,network-index = <0>;
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1c 4 0x1d 4>;
+				reg = <0xef600e00 0x70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <0 1>;
+				mal-rx-channel = <0>;
+				cell-index = <0>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "rmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <0>;
+			};
+
+			EMAC1: ethernet@ef600f00 {
+				linux,network-index = <1>;
+				device_type = "network";
+				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
+				interrupt-parent = <&UIC1>;
+				interrupts = <0x1e 4 0x1f 4>;
+				reg = <0xef600f00 0x70>;
+				local-mac-address = [000000000000];
+				mal-device = <&MAL0>;
+				mal-tx-channel = <2 3>;
+				mal-rx-channel = <1>;
+				cell-index = <1>;
+				max-frame-size = <0x5dc>;
+				rx-fifo-size = <0x1000>;
+				tx-fifo-size = <0x800>;
+				phy-mode = "rmii";
+				phy-map = <00000000>;
+				zmii-device = <&ZMII0>;
+				zmii-channel = <1>;
+			};
+			usb@ef601000 {
+				compatible = "ohci-be";
+				reg = <0xef601000 0x80>;
+				interrupts = <8 4 9 4>;
+				interrupt-parent = <&UIC1>;
+			};	
+		};
+
+		PCI0: pci@ec000000 {
+			device_type = "pci";
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
+			primary;
+			reg = <0 0xeec00000 8	   /* Config space access */
+			       0 0xeed00000 4	   /* IACK */
+			       0 0xeed00000 4	   /* Special cycle */
+			       0 0xef400000 0x40>; /* Internal registers */
+
+			/* Outbound ranges, one memory and one IO,
+			 * later cannot be changed. Chip supports a second
+			 * IO range but we don't use it for now
+			 */
+			ranges = <0x02000000 0 0xa0000000 0 0xa0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0 0xe8000000 0 0x00010000>;
+
+			/* Inbound 2GB range starting at 0 */
+			dma-ranges = <0x42000000 0 0 0 0 0 0x80000000>;
+		};
+	};
+
+	chosen {
+		linux,stdout-path = "/plb/opb/serial@ef600300";
+	};
+};
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 3839d4b7d6a7..45f789b56709 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -95,6 +95,41 @@
 			mode = "cpu";
 		};
 
+		dma@82a8 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
+			reg = <0x82a8 4>;
+			ranges = <0 0x8100 0x1a8>;
+			interrupt-parent = <&ipic>;
+			interrupts = <71 8>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x80 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x100 0x80>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
+				reg = <0x180 0x28>;
+				interrupt-parent = <&ipic>;
+				interrupts = <71 8>;
+			};
+		};
+
 		/* phy type (ULPI or SERIAL) are only types supported for MPH */
 		/* port = 0 or 1 */
 		usb@22000 {
@@ -186,19 +221,15 @@
 			interrupt-parent = <&ipic>;
 		};
 
-		/* May need to remove if on a part without crypto engine */
 		crypto@30000 {
-			model = "SEC2";
-			compatible = "talitos";
+			compatible = "fsl,sec2.0";
 			reg = <0x30000 0x10000>;
 			interrupts = <11 0x8>;
 			interrupt-parent = <&ipic>;
-			num-channels = <4>;
-			channel-fifo-len = <24>;
-			exec-units-mask = <0x0000007e>;
-			/* desc mask is for rev2.0,
-			 * we need runtime fixup for >2.0 */
-			descriptor-types-mask = <0x01010ebf>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
 		};
 
 		/* IPIC
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index 22d967178fe9..333552b4e90d 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -44,6 +44,7 @@
 			timebase-frequency = <0>;	// From uboot
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -161,7 +162,7 @@
 			interrupts = <0x12 0x2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8548-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;	// 32 bytes
@@ -192,6 +193,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -262,15 +304,24 @@
 			fsl,has-rstcr;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xfe>;
+			fsl,descriptor-types-mask = <0x12b0ebf>;
+		};
+
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
-			#size-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			compatible = "chrp,open-pic";
 			device_type = "open-pic";
-                        big-endian;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
index 0476802fba60..db3632ef9888 100644
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ b/arch/powerpc/boot/dts/sbc8560.dts
@@ -43,6 +43,7 @@
 			timebase-frequency = <0>;	// From uboot
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -66,7 +67,7 @@
 			interrupts = <0x12 0x2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8560-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <0x20>;	// 32 bytes
@@ -97,6 +98,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -155,8 +197,8 @@
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
-			#size-cells = <0>;
 			#interrupt-cells = <2>;
+			compatible = "chrp,open-pic";
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
 		};
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
index 3eebeec157b3..9652456158fb 100644
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -151,6 +151,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8641-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts
index 72d67564bdfc..72d15f075d34 100644
--- a/arch/powerpc/boot/dts/sequoia.dts
+++ b/arch/powerpc/boot/dts/sequoia.dts
@@ -12,12 +12,14 @@
  *
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,sequoia";
 	compatible = "amcc,sequoia";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -35,13 +37,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440EPx";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -49,14 +51,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440epx","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -66,11 +68,11 @@
 		compatible = "ibm,uic-440epx","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
@@ -78,22 +80,22 @@
 		compatible = "ibm,uic-440epx","ibm,uic";
 		interrupt-controller;
 		cell-index = <2>;
-		dcr-reg = <0e0 009>;
+		dcr-reg = <0x0e0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1c 4 1d 4>; /* cascade */
+		interrupts = <0x1c 0x4 0x1d 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440epx", "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440epx", "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -105,44 +107,44 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440epx", "ibm,dma-4xx";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440epx", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <2>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		USB1: usb@e0000400 {
 			compatible = "ohci-be";
-			reg = <0 e0000400 60>;
+			reg = <0x00000000 0xe0000400 0x00000060>;
 			interrupt-parent = <&UIC0>;
-			interrupts = <15 8>;
+			interrupts = <0x15 0x8>;
 		};
 
 		USB0: ehci@e0000300 {
 			compatible = "ibm,usb-ehci-440epx", "usb-ehci";
 			interrupt-parent = <&UIC0>;
-			interrupts = <1a 4>;
-			reg = <0 e0000300 90 0 e0000390 70>;
+			interrupts = <0x1a 0x4>;
+			reg = <0x00000000 0xe0000300 0x00000090 0x00000000 0xe0000390 0x00000070>;
 			big-endian;
 		};
 
@@ -150,50 +152,50 @@
 		  	compatible = "ibm,opb-440epx", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-		  	ranges = <00000000 1 00000000 80000000
-			          80000000 1 80000000 80000000>;
+		  	ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+			          0x80000000 0x00000001 0x80000000 0x80000000>;
 		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <7 4>;
+		  	interrupts = <0x7 0x4>;
 		  	clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440epx", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				nor_flash@0,0 {
 					compatible = "amd,s29gl256n", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 000000 4000000>;
+					reg = <0x00000000 0x00000000 0x04000000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
 					partition@0 {
 						label = "Kernel";
-						reg = <0 180000>;
+						reg = <0x00000000 0x00180000>;
 					};
 					partition@180000 {
 						label = "ramdisk";
-						reg = <180000 200000>;
+						reg = <0x00180000 0x00200000>;
 					};
 					partition@380000 {
 						label = "file system";
-						reg = <380000 3aa0000>;
+						reg = <0x00380000 0x03aa0000>;
 					};
 					partition@3e20000 {
 						label = "kozio";
-						reg = <3e20000 140000>;
+						reg = <0x03e20000 0x00140000>;
 					};
 					partition@3f60000 {
 						label = "env";
-						reg = <3f60000 40000>;
+						reg = <0x03f60000 0x00040000>;
 					};
 					partition@3fa0000 {
 						label = "u-boot";
-						reg = <3fa0000 60000>;
+						reg = <0x03fa0000 0x00060000>;
 					};
 				};
 
@@ -202,69 +204,69 @@
 			UART0: serial@ef600300 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600300 8>;
-		   		virtual-reg = <ef600300>;
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
 		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <1c200>;
+		   		current-speed = <115200>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
+		   		interrupts = <0x0 0x4>;
 	   		};
 
 			UART1: serial@ef600400 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600400 8>;
-		   		virtual-reg = <ef600400>;
+		   		reg = <0xef600400 0x00000008>;
+		   		virtual-reg = <0xef600400>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <1 4>;
+		   		interrupts = <0x1 0x4>;
 	   		};
 
 			UART2: serial@ef600500 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600500 8>;
-		   		virtual-reg = <ef600500>;
+		   		reg = <0xef600500 0x00000008>;
+		   		virtual-reg = <0xef600500>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <3 4>;
+		   		interrupts = <0x3 0x4>;
 	   		};
 
 			UART3: serial@ef600600 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600600 8>;
-		   		virtual-reg = <ef600600>;
+		   		reg = <0xef600600 0x00000008>;
+		   		virtual-reg = <0xef600600>;
 		   		clock-frequency = <0>;
 		   		current-speed = <0>;
 		   		interrupt-parent = <&UIC1>;
-		   		interrupts = <4 4>;
+		   		interrupts = <0x4 0x4>;
 	   		};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440epx", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-440epx", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440epx", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@ef601000 {
 				compatible = "ibm,rgmii-440epx", "ibm,rgmii";
-				reg = <ef601000 8>;
+				reg = <0xef601000 0x00000008>;
 				has-mdio;
 			};
 
@@ -272,23 +274,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC0>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 18 4
-						/*Wake*/  1 &UIC1 1d 4>;
-				reg = <ef600e00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x18 0x4
+						/*Wake*/  0x1 &UIC1 0x1d 0x4>;
+				reg = <0xef600e00 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 				rgmii-device = <&RGMII0>;
@@ -301,23 +303,23 @@
 				device_type = "network";
 				compatible = "ibm,emac-440epx", "ibm,emac4";
 				interrupt-parent = <&EMAC1>;
-				interrupts = <0 1>;
+				interrupts = <0x0 0x1>;
 				#interrupt-cells = <1>;
 				#address-cells = <0>;
 				#size-cells = <0>;
-				interrupt-map = </*Status*/ 0 &UIC0 19 4
-						/*Wake*/  1 &UIC1 1f 4>;
-				reg = <ef600f00 70>;
+				interrupt-map = </*Status*/ 0x0 &UIC0 0x19 0x4
+						/*Wake*/  0x1 &UIC1 0x1f 0x4>;
+				reg = <0xef600f00 0x00000074>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 				rgmii-device = <&RGMII0>;
@@ -334,10 +336,10 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440epx-pci", "ibm,plb-pci";
 			primary;
-			reg = <1 eec00000 8	/* Config space access */
-			       1 eed00000 4	/* IACK */
-			       1 eed00000 4	/* Special cycle */
-			       1 ef400000 40>;	/* Internal registers */
+			reg = <0x00000001 0xeec00000 0x00000008	/* Config space access */
+			       0x00000001 0xeed00000 0x00000004	/* IACK */
+			       0x00000001 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000001 0xef400000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
@@ -347,16 +349,16 @@
 			 * I/O              1 E800 0000     1 E800 FFFF     64KB
 			 * I/O              1 E880 0000     1 EBFF FFFF     56MB
 			 */
-			ranges = <02000000 0 80000000 1 80000000 0 40000000
-				01000000 0 00000000 1 e8000000 0 00010000
-				01000000 0 00000000 1 e8800000 0 03800000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000001 0x80000000 0x00000000 0x40000000
+				0x01000000 0x00000000 0x00000000 0x00000001 0xe8000000 0x00000000 0x00010000
+				0x01000000 0x00000000 0x00000000 0x00000001 0xe8800000 0x00000000 0x03800000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* All PCI interrupts are routed to IRQ 67 */
-			interrupt-map-mask = <0000 0 0 0>;
-			interrupt-map = < 0000 0 0 0 &UIC2 3 8 >;
+			interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+			interrupt-map = < 0x0 0x0 0x0 0x0 &UIC2 0x3 0x8 >;
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/storcenter.dts b/arch/powerpc/boot/dts/storcenter.dts
index 5893816c0bce..eab680ce10da 100644
--- a/arch/powerpc/boot/dts/storcenter.dts
+++ b/arch/powerpc/boot/dts/storcenter.dts
@@ -95,6 +95,7 @@
 
 		mpic: interrupt-controller@40000 {
 			#interrupt-cells = <2>;
+			#address-cells = <0>;
 			device_type = "open-pic";
 			compatible = "chrp,open-pic";
 			interrupt-controller;
diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts
index f81fd7fdb29e..fcd1db6ca0a8 100644
--- a/arch/powerpc/boot/dts/stx_gp3_8560.dts
+++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts
@@ -38,6 +38,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -62,7 +63,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -82,6 +83,47 @@
 			dfsrr;
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -131,6 +173,7 @@
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
 			device_type = "open-pic";
 		};
 
diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts
index e808e1c5593a..058438f9629b 100644
--- a/arch/powerpc/boot/dts/taishan.dts
+++ b/arch/powerpc/boot/dts/taishan.dts
@@ -10,12 +10,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,taishan";
 	compatible = "amcc,taishan";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC2;
@@ -31,13 +33,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440GX";
-			reg = <0>;
-			clock-frequency = <2FAF0800>; // 800MHz
+			reg = <0x00000000>;
+			clock-frequency = <800000000>; // 800MHz
 			timebase-frequency = <0>; // Filled in by zImage
-			i-cache-line-size = <32>;
-			d-cache-line-size = <32>;
-			i-cache-size = <8000>; /* 32 kB */
-			d-cache-size = <8000>; /* 32 kB */
+			i-cache-line-size = <50>;
+			d-cache-line-size = <50>;
+			i-cache-size = <32768>; /* 32 kB */
+			d-cache-size = <32768>; /* 32 kB */
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -45,7 +47,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; // Filled in by zImage
+		reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
 	};
 
 
@@ -53,7 +55,7 @@
 		compatible = "ibm,uic-440gx", "ibm,uic";
 		interrupt-controller;
 		cell-index = <3>;
-		dcr-reg = <200 009>;
+		dcr-reg = <0x200 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -64,11 +66,11 @@
 		compatible = "ibm,uic-440gx", "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <01 4 00 4>; /* cascade - first non-critical */
+		interrupts = <0x1 0x4 0x0 0x4>; /* cascade - first non-critical */
 		interrupt-parent = <&UICB0>;
 
 	};
@@ -77,11 +79,11 @@
 		compatible = "ibm,uic-440gx", "ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <03 4 02 4>; /* cascade */
+		interrupts = <0x3 0x4 0x2 0x4>; /* cascade */
 		interrupt-parent = <&UICB0>;
 	};
 
@@ -89,29 +91,29 @@
 		compatible = "ibm,uic-440gx", "ibm,uic";
 		interrupt-controller;
 		cell-index = <2>; /* was 1 */
-		dcr-reg = <210 009>;
+		dcr-reg = <0x210 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <05 4 04 4>; /* cascade */
+		interrupts = <0x5 0x4 0x4 0x4>; /* cascade */
 		interrupt-parent = <&UICB0>;
 	};
 
 
 	CPC0: cpc {
 		compatible = "ibm,cpc-440gp";
-		dcr-reg = <0b0 003 0e0 010>;
+		dcr-reg = <0x0b0 0x003 0x0e0 0x010>;
 		// FIXME: anything else?
 	};
 
 	L2C0: l2c {
 		compatible = "ibm,l2-cache-440gx", "ibm,l2-cache";
-		dcr-reg = <20 8			/* Internal SRAM DCR's */
-			   30 8>;		/* L2 cache DCR's */
-		cache-line-size = <20>;		/* 32 bytes */
-		cache-size = <40000>;		/* L2, 256K */
+		dcr-reg = <0x020 0x008			/* Internal SRAM DCR's */
+			   0x030 0x008>;		/* L2 cache DCR's */
+		cache-line-size = <32>;		/* 32 bytes */
+		cache-size = <262144>;		/* L2, 256K */
 		interrupt-parent = <&UIC2>;
-		interrupts = <17 1>;
+		interrupts = <0x17 0x1>;
 	};
 
 	plb {
@@ -119,41 +121,41 @@
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges;
-		clock-frequency = <9896800>; // 160MHz
+		clock-frequency = <160000000>; // 160MHz
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-440gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 			// FIXME: anything else?
 		};
 
 		SRAM0: sram {
 			compatible = "ibm,sram-440gp";
-			dcr-reg = <020 8 00a 1>;
+			dcr-reg = <0x020 0x008 0x00a 0x001>;
 		};
 
 		DMA0: dma {
 			// FIXME: ???
 			compatible = "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440gx", "ibm,mcmal2";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <4>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					 /*RXEOB*/ 1 &UIC0 b 4
-					 /*SERR*/  2 &UIC1 0 4
-					 /*TXDE*/  3 &UIC1 1 4
-					 /*RXDE*/  4 &UIC1 2 4>;
-			interrupt-map-mask = <ffffffff>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					 /*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					 /*SERR*/  0x2 &UIC1 0x0 0x4
+					 /*TXDE*/  0x3 &UIC1 0x1 0x4
+					 /*RXDE*/  0x4 &UIC1 0x2 0x4>;
+			interrupt-map-mask = <0xffffffff>;
 		};
 
 		POB0: opb {
@@ -162,29 +164,56 @@
 			#size-cells = <1>;
 			/* Wish there was a nicer way of specifying a full 32-bit
 			   range */
-			ranges = <00000000 1 00000000 80000000
-				  80000000 1 80000000 80000000>;
-			dcr-reg = <090 00b>;
+			ranges = <0x00000000 0x00000001 0x00000000 0x80000000
+				  0x80000000 0x00000001 0x80000000 0x80000000>;
+			dcr-reg = <0x090 0x00b>;
 			interrupt-parent = <&UIC1>;
-			interrupts = <7 4>;
-			clock-frequency = <4C4B400>; // 80MHz
+			interrupts = <0x7 0x4>;
+			clock-frequency = <80000000>; // 80MHz
 
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440gx", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
-				clock-frequency = <4C4B400>; // 80MHz
+				clock-frequency = <80000000>; // 80MHz
 
 				/* ranges property is supplied by zImage
 				 * based on firmware's configuration of the
 				 * EBC bridge */
 
-				interrupts = <5 4>;
+				interrupts = <0x5 0x4>;
 				interrupt-parent = <&UIC1>;
 
-				/* TODO: Add other EBC devices */
+				nor_flash@0,0 {
+					compatible = "cfi-flash";
+					bank-width = <4>;
+					device-width = <2>;
+					reg = <0x0 0x0 0x4000000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					partition@0 {
+						label = "kernel";
+						reg = <0x0 0x180000>;
+					};
+					partition@180000 {
+						label = "root";
+						reg = <0x180000 0x200000>;
+					};
+					partition@380000 {
+						label = "user";
+						reg = <0x380000 0x3bc0000>;
+					};
+					partition@3f40000 {
+						label = "env";
+						reg = <0x3f40000 0x80000>;
+					};
+					partition@3fc0000 {
+						label = "u-boot";
+						reg = <0x3fc0000 0x40000>;
+					};
+				};
 			};
 
 
@@ -192,103 +221,103 @@
 			UART0: serial@40000200 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000200 8>;
-				virtual-reg = <e0000200>;
- 				clock-frequency = <A8C000>;
-				current-speed = <1C200>; /* 115200 */
+				reg = <0x40000200 0x00000008>;
+				virtual-reg = <0xe0000200>;
+ 				clock-frequency = <11059200>;
+				current-speed = <115200>; /* 115200 */
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@40000300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <40000300 8>;
-				virtual-reg = <e0000300>;
-				clock-frequency = <A8C000>;
-				current-speed = <1C200>; /* 115200 */
+				reg = <0x40000300 0x00000008>;
+				virtual-reg = <0xe0000300>;
+				clock-frequency = <11059200>;
+				current-speed = <115200>; /* 115200 */
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC0: i2c@40000400 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000400 14>;
+				reg = <0x40000400 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 			IIC1: i2c@40000500 {
 				/* FIXME */
 				compatible = "ibm,iic-440gp", "ibm,iic";
-				reg = <40000500 14>;
+				reg = <0x40000500 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 			};
 
 			GPIO0: gpio@40000700 {
 				/* FIXME */
 				compatible = "ibm,gpio-440gp";
-				reg = <40000700 20>;
+				reg = <0x40000700 0x00000020>;
 			};
 
 			ZMII0: emac-zmii@40000780 {
 				compatible = "ibm,zmii-440gx", "ibm,zmii";
-				reg = <40000780 c>;
+				reg = <0x40000780 0x0000000c>;
 			};
 
 			RGMII0: emac-rgmii@40000790 {
 				compatible = "ibm,rgmii";
-				reg = <40000790 8>;
+				reg = <0x40000790 0x00000008>;
 			};
 
 			TAH0: emac-tah@40000b50 {
 				compatible = "ibm,tah-440gx", "ibm,tah";
-				reg = <40000b50 30>;
+				reg = <0x40000b50 0x00000030>;
 			};
 
 			TAH1: emac-tah@40000d50 {
 				compatible = "ibm,tah-440gx", "ibm,tah";
-				reg = <40000d50 30>;
+				reg = <0x40000d50 0x00000030>;
 			};
 
 			EMAC0: ethernet@40000800 {
-				unused = <1>;
+				unused = <0x1>;
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <40000800 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0x40000800 0x00000074>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
 		 	EMAC1: ethernet@40000900 {
-				unused = <1>;
+				unused = <0x1>;
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4 1f 4>;
-				reg = <40000900 70>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0x40000900 0x00000074>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <1>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
  				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 			};
@@ -297,18 +326,18 @@
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC2>;
-				interrupts = <0 4 1 4>;
-				reg = <40000c00 70>;
+				interrupts = <0x0 0x4 0x1 0x4>;
+				reg = <0x40000c00 0x00000074>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2>;
 				mal-rx-channel = <2>;
 				cell-index = <2>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <0>;
  				zmii-device = <&ZMII0>;
@@ -321,18 +350,18 @@
 				device_type = "network";
 				compatible = "ibm,emac-440gx", "ibm,emac4";
 				interrupt-parent = <&UIC2>;
-				interrupts = <2 4 3 4>;
-				reg = <40000e00 70>;
+				interrupts = <0x2 0x4 0x3 0x4>;
+				reg = <0x40000e00 0x00000074>;
 				local-mac-address = [000000000000]; // Filled in by zImage
 				mal-device = <&MAL0>;
 				mal-tx-channel = <3>;
 				mal-rx-channel = <3>;
 				cell-index = <3>;
-				max-frame-size = <2328>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <9000>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rgmii";
-				phy-map = <00000003>;
+				phy-map = <0x00000003>;
 				rgmii-device = <&RGMII0>;
 				rgmii-channel = <1>;
  				zmii-device = <&ZMII0>;
@@ -344,9 +373,9 @@
 
 			GPT0: gpt@40000a00 {
 				/* FIXME */
-				reg = <40000a00 d4>;
+				reg = <0x40000a00 0x000000d4>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <12 4 13 4 14 4 15 4 16 4>;
+				interrupts = <0x12 0x4 0x13 0x4 0x14 0x4 0x15 0x4 0x16 0x4>;
 			};
 
 		};
@@ -360,34 +389,34 @@
 			primary;
 			large-inbound-windows;
 			enable-msi-hole;
-			reg = <2 0ec00000   8	/* Config space access */
-			       0 0 0		/* no IACK cycles */
-			       2 0ed00000   4   /* Special cycles */
-			       2 0ec80000 100	/* Internal registers */
-			       2 0ec80100  fc>;	/* Internal messaging registers */
+			reg = <0x00000002 0x0ec00000   0x00000008	/* Config space access */
+			       0x00000000 0x00000000 0x00000000		/* no IACK cycles */
+			       0x00000002 0x0ed00000   0x00000004   /* Special cycles */
+			       0x00000002 0x0ec80000 0x00000100	/* Internal registers */
+			       0x00000002 0x0ec80100  0x000000fc>;	/* Internal messaging registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed
 			 */
-			ranges = <02000000 0 80000000 00000003 80000000 0 80000000
-				  01000000 0 00000000 00000002 08000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x00000003 0x80000000 0x00000000 0x80000000
+				  0x01000000 0x00000000 0x00000000 0x00000002 0x08000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
-			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 1 &UIC0 17 8
-				0800 0 0 2 &UIC0 18 8
-				0800 0 0 3 &UIC0 19 8
-				0800 0 0 4 &UIC0 1a 8
+				0x800 0x0 0x0 0x1 &UIC0 0x17 0x8
+				0x800 0x0 0x0 0x2 &UIC0 0x18 0x8
+				0x800 0x0 0x0 0x3 &UIC0 0x19 0x8
+				0x800 0x0 0x0 0x4 &UIC0 0x1a 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 1 &UIC0 18 8
-				1000 0 0 2 &UIC0 19 8
-				1000 0 0 3 &UIC0 1a 8
-				1000 0 0 4 &UIC0 17 8
+				0x1000 0x0 0x0 0x1 &UIC0 0x18 0x8
+				0x1000 0x0 0x0 0x2 &UIC0 0x19 0x8
+				0x1000 0x0 0x0 0x3 &UIC0 0x1a 0x8
+				0x1000 0x0 0x0 0x4 &UIC0 0x17 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index 773a68e00058..3008bf8830c1 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -70,6 +70,20 @@
 			fsl,has-wdt;
 		};
 
+		can@900 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			interrupt-parent = <&mpc5200_pic>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			interrupt-parent = <&mpc5200_pic>;
+			reg = <0x980 0x80>;
+		};
+
 		gpio@b00 {
 			compatible = "fsl,mpc5200-gpio";
 			reg = <0xb00 0x40>;
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index 1addb3ae719e..e1d260b9085e 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -12,8 +12,8 @@
 /dts-v1/;
 
 / {
-	model = "tqm,8540";
-	compatible = "tqm,8540", "tqm,85xx";
+	model = "tqc,tqm8540";
+	compatible = "tqc,tqm8540";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -40,6 +40,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -64,7 +65,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -89,6 +90,47 @@
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8540-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -177,6 +219,7 @@
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
+			compatible = "chrp,open-pic";
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index 9e01093f496e..d76441ec5dc7 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -12,8 +12,8 @@
 /dts-v1/;
 
 / {
-	model = "tqm,8541";
-	compatible = "tqm,8541", "tqm,85xx";
+	model = "tqc,tqm8541";
+	compatible = "tqc,tqm8541";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -39,6 +39,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -63,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -88,6 +89,47 @@
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8541-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8541-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -158,12 +200,24 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
+			compatible = "chrp,open-pic";
 		};
 
 		cpm@919c0 {
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
new file mode 100644
index 000000000000..64d2d5bbcdf1
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -0,0 +1,406 @@
+/*
+ * TQM8548 Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm8548";
+	compatible = "tqc,tqm8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
+	};
+
+	soc8548@a0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xa0000000 0x100000>;
+		reg = <0xa0000000 0x1000>;	// CCSRBAR
+		bus-frequency = <0>;
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy1: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			phy2: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			phy3: ethernet-phy@3 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+			phy4: ethernet-phy@4 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <4>;
+				device_type = "ethernet-phy";
+			};
+			phy5: ethernet-phy@5 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <5>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy2>;
+		};
+
+		enet1: ethernet@25000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+		};
+
+		enet2: ethernet@26000 {
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy3>;
+		};
+
+		enet3: ethernet@27000 {
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy4>;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@a0005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xa0005000 0x100>;	// BRx, ORx, etc.
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xa3000000 0x00008000	// CAN (2 x i82527)
+			3 0x0 0xa3010000 0x00008000	// NAND FLASH
+
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can0@2,0 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		can1@2,100 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* Note: NAND support needs to be enabled in U-Boot */
+		upm@3,0 {
+			#address-cells = <0>;
+			#size-cells = <0>;
+			compatible = "fsl,upm-nand";
+			reg = <3 0x0 0x800>;
+			fsl,upm-addr-offset = <0x10>;
+			fsl,upm-cmd-offset = <0x08>;
+			chip-delay = <25>; // in micro-seconds
+
+			nand@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					    label = "fs";
+					    reg = <0x00000000 0x01000000>;
+				};
+			};
+		};
+	};
+
+	pci0: pci@a0008000 {
+		cell-index = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xa0008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xa2000000 0 0x01000000>;
+	};
+
+	pci1: pcie@a000a000 {
+		cell-index = <2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 (PEX) */
+			0x00000 0 0 1 &mpic 0 1
+			0x00000 0 0 2 &mpic 1 1
+			0x00000 0 0 3 &mpic 2 1
+			0x00000 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xb0000000 0xb0000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xaf000000 0 0x08000000>;
+		clock-frequency = <33333333>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xa000a000 0x1000>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xb0000000 0x02000000 0
+			          0xb0000000 0 0x10000000
+				  0x01000000 0 0x00000000 0x01000000 0
+				  0x00000000 0 0x08000000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
new file mode 100644
index 000000000000..2563112cabd3
--- /dev/null
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -0,0 +1,411 @@
+/*
+ * TQM8548 Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "tqc,tqm8548";
+	compatible = "tqc,tqm8548";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8548@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
+	};
+
+	soc8548@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x1000>;	// CCSRBAR
+		bus-frequency = <0>;
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8548-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8548-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1337";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8548-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy1: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			phy2: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			phy3: ethernet-phy@3 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+			phy4: ethernet-phy@4 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <4>;
+				device_type = "ethernet-phy";
+			};
+			phy5: ethernet-phy@5 {
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+				reg = <5>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy2>;
+		};
+
+		enet1: ethernet@25000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+		};
+
+		enet2: ethernet@26000 {
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy3>;
+		};
+
+		enet3: ethernet@27000 {
+			cell-index = <3>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x27000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <37 2 38 2 39 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy4>;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;	// reg base, size
+			clock-frequency = <0>;	// should we fill in in uboot?
+			current-speed = <115200>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	// global utilities reg
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	localbus@e0005000 {
+		compatible = "fsl,mpc8548-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xe0005000 0x100>;	// BRx, ORx, etc.
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xe3000000 0x00008000	// CAN (2 x i82527)
+			3 0x0 0xe3010000 0x00008000	// NAND FLASH
+
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can0@2,0 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		can1@2,100 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		/* Note: NAND support needs to be enabled in U-Boot */
+		upm@3,0 {
+			#address-cells = <0>;
+			#size-cells = <0>;
+			compatible = "fsl,upm-nand";
+			reg = <3 0x0 0x800>;
+			fsl,upm-addr-offset = <0x10>;
+			fsl,upm-cmd-offset = <0x08>;
+			chip-delay = <25>; // in micro-seconds
+
+			nand@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					    label = "fs";
+					    reg = <0x00000000 0x01000000>;
+				};
+			};
+		};
+	};
+
+	pci0: pci@e0008000 {
+		cell-index = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <33333333>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 28 */
+				 0xe000 0 0 1 &mpic 2 1
+				 0xe000 0 0 2 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0 0>;
+		ranges = <0x02000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xe2000000 0 0x01000000>;
+	};
+
+	pci1: pcie@e000a000 {
+		cell-index = <2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 (PEX) */
+			0x00000 0 0 1 &mpic 0 1
+			0x00000 0 0 2 &mpic 1 1
+			0x00000 0 0 3 &mpic 2 1
+			0x00000 0 0 4 &mpic 3 1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 0xff>;
+		ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x20000000
+			  0x01000000 0 0x00000000 0xef000000 0 0x08000000>;
+		clock-frequency = <33333333>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe000a000 0x1000>;
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		pcie@0 {
+			reg = <0 0 0 0 0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x02000000 0 0xc0000000 0x02000000 0
+			          0xc0000000 0 0x20000000
+				  0x01000000 0 0x00000000 0x01000000 0
+				  0x00000000 0 0x08000000>;
+		};
+	};
+};
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index a20eb06c482f..6f7ea59c4846 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -12,8 +12,8 @@
 /dts-v1/;
 
 / {
-	model = "tqm,8555";
-	compatible = "tqm,8555", "tqm,85xx";
+	model = "tqc,tqm8555";
+	compatible = "tqc,tqm8555";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -39,6 +39,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -63,7 +64,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -88,6 +89,47 @@
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8555-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8555-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -158,12 +200,24 @@
 			interrupt-parent = <&mpic>;
 		};
 
+		crypto@30000 {
+			compatible = "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x7e>;
+			fsl,descriptor-types-mask = <0x01010ebf>;
+		};
+
 		mpic: pic@40000 {
 			interrupt-controller;
 			#address-cells = <0>;
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
+			compatible = "chrp,open-pic";
 		};
 
 		cpm@919c0 {
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
index b9ac6c943b89..3fe35208907b 100644
--- a/arch/powerpc/boot/dts/tqm8560.dts
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -2,6 +2,7 @@
  * TQM 8560 Device Tree Source
  *
  * Copyright 2008 Freescale Semiconductor Inc.
+ * Copyright 2008 Wolfgang Grandegger <wg@grandegger.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -12,8 +13,8 @@
 /dts-v1/;
 
 / {
-	model = "tqm,8560";
-	compatible = "tqm,8560", "tqm,85xx";
+	model = "tqc,tqm8560";
+	compatible = "tqc,tqm8560";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -40,6 +41,7 @@
 			timebase-frequency = <0>;
 			bus-frequency = <0>;
 			clock-frequency = <0>;
+			next-level-cache = <&L2>;
 		};
 	};
 
@@ -64,7 +66,7 @@
 			interrupts = <18 2>;
 		};
 
-		l2-cache-controller@20000 {
+		L2: l2-cache-controller@20000 {
 			compatible = "fsl,8540-l2-cache-controller";
 			reg = <0x20000 0x1000>;
 			cache-line-size = <32>;
@@ -89,6 +91,47 @@
 			};
 		};
 
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8560-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
 		mdio@24520 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -145,6 +188,7 @@
 			#interrupt-cells = <2>;
 			reg = <0x40000 0x40000>;
 			device_type = "open-pic";
+			compatible = "chrp,open-pic";
 		};
 
 		cpm@919c0 {
@@ -221,6 +265,70 @@
 		};
 	};
 
+	localbus@e0005000 {
+		compatible = "fsl,mpc8560-localbus", "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xe0005000 0x100>;	// BRx, ORx, etc.
+
+		ranges = <
+			0 0x0 0xfc000000 0x04000000	// NOR FLASH bank 1
+			1 0x0 0xf8000000 0x08000000	// NOR FLASH bank 0
+			2 0x0 0xe3000000 0x00008000	// CAN (2 x i82527)
+		>;
+
+		flash@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <1 0x0 0x8000000>;
+			bank-width = <4>;
+			device-width = <1>;
+
+			partition@0 {
+				label = "kernel";
+				reg = <0x00000000 0x00200000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x00200000 0x00300000>;
+			};
+			partition@500000 {
+				label = "user";
+				reg = <0x00500000 0x07a00000>;
+			};
+			partition@7f00000 {
+				label = "env1";
+				reg = <0x07f00000 0x00040000>;
+			};
+			partition@7f40000 {
+				label = "env2";
+				reg = <0x07f40000 0x00040000>;
+			};
+			partition@7f80000 {
+				label = "u-boot";
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		/* Note: CAN support needs be enabled in U-Boot */
+		can0@2,0 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x0 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		can1@2,100 {
+			compatible = "intel,82527"; // Bosch CC770
+			reg = <2 0x100 0x100>;
+			interrupts = <4 0>;
+			interrupt-parent = <&mpic>;
+		};
+	};
+
 	pci0: pci@e0008000 {
 		cell-index = <0>;
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/virtex440-ml507.dts b/arch/powerpc/boot/dts/virtex440-ml507.dts
new file mode 100644
index 000000000000..dc8e78e2dceb
--- /dev/null
+++ b/arch/powerpc/boot/dts/virtex440-ml507.dts
@@ -0,0 +1,296 @@
+/*
+ * This file supports the Xilinx ML507 board with the 440 processor.
+ * A reference design for the FPGA is provided at http://git.xilinx.com.
+ *
+ * (C) Copyright 2008 Xilinx, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,virtex440";
+	dcr-parent = <&ppc440_0>;
+	model = "testing";
+	DDR2_SDRAM: memory@0 {
+		device_type = "memory";
+		reg = < 0 0x10000000 >;
+	} ;
+	chosen {
+		bootargs = "console=ttyS0 ip=on root=/dev/ram";
+		linux,stdout-path = "/plb@0/serial@83e00000";
+	} ;
+	cpus {
+		#address-cells = <1>;
+		#cpus = <1>;
+		#size-cells = <0>;
+		ppc440_0: cpu@0 {
+			clock-frequency = <400000000>;
+			compatible = "PowerPC,440", "ibm,ppc440";
+			d-cache-line-size = <0x20>;
+			d-cache-size = <0x8000>;
+			dcr-access-method = "native";
+			dcr-controller ;
+			device_type = "cpu";
+			i-cache-line-size = <0x20>;
+			i-cache-size = <0x8000>;
+			model = "PowerPC,440";
+			reg = <0>;
+			timebase-frequency = <400000000>;
+			xlnx,apu-control = <1>;
+			xlnx,apu-udi-0 = <0>;
+			xlnx,apu-udi-1 = <0>;
+			xlnx,apu-udi-10 = <0>;
+			xlnx,apu-udi-11 = <0>;
+			xlnx,apu-udi-12 = <0>;
+			xlnx,apu-udi-13 = <0>;
+			xlnx,apu-udi-14 = <0>;
+			xlnx,apu-udi-15 = <0>;
+			xlnx,apu-udi-2 = <0>;
+			xlnx,apu-udi-3 = <0>;
+			xlnx,apu-udi-4 = <0>;
+			xlnx,apu-udi-5 = <0>;
+			xlnx,apu-udi-6 = <0>;
+			xlnx,apu-udi-7 = <0>;
+			xlnx,apu-udi-8 = <0>;
+			xlnx,apu-udi-9 = <0>;
+			xlnx,dcr-autolock-enable = <1>;
+			xlnx,dcu-rd-ld-cache-plb-prio = <0>;
+			xlnx,dcu-rd-noncache-plb-prio = <0>;
+			xlnx,dcu-rd-touch-plb-prio = <0>;
+			xlnx,dcu-rd-urgent-plb-prio = <0>;
+			xlnx,dcu-wr-flush-plb-prio = <0>;
+			xlnx,dcu-wr-store-plb-prio = <0>;
+			xlnx,dcu-wr-urgent-plb-prio = <0>;
+			xlnx,dma0-control = <0>;
+			xlnx,dma0-plb-prio = <0>;
+			xlnx,dma0-rxchannelctrl = <0x1010000>;
+			xlnx,dma0-rxirqtimer = <0x3ff>;
+			xlnx,dma0-txchannelctrl = <0x1010000>;
+			xlnx,dma0-txirqtimer = <0x3ff>;
+			xlnx,dma1-control = <0>;
+			xlnx,dma1-plb-prio = <0>;
+			xlnx,dma1-rxchannelctrl = <0x1010000>;
+			xlnx,dma1-rxirqtimer = <0x3ff>;
+			xlnx,dma1-txchannelctrl = <0x1010000>;
+			xlnx,dma1-txirqtimer = <0x3ff>;
+			xlnx,dma2-control = <0>;
+			xlnx,dma2-plb-prio = <0>;
+			xlnx,dma2-rxchannelctrl = <0x1010000>;
+			xlnx,dma2-rxirqtimer = <0x3ff>;
+			xlnx,dma2-txchannelctrl = <0x1010000>;
+			xlnx,dma2-txirqtimer = <0x3ff>;
+			xlnx,dma3-control = <0>;
+			xlnx,dma3-plb-prio = <0>;
+			xlnx,dma3-rxchannelctrl = <0x1010000>;
+			xlnx,dma3-rxirqtimer = <0x3ff>;
+			xlnx,dma3-txchannelctrl = <0x1010000>;
+			xlnx,dma3-txirqtimer = <0x3ff>;
+			xlnx,endian-reset = <0>;
+			xlnx,generate-plb-timespecs = <1>;
+			xlnx,icu-rd-fetch-plb-prio = <0>;
+			xlnx,icu-rd-spec-plb-prio = <0>;
+			xlnx,icu-rd-touch-plb-prio = <0>;
+			xlnx,interconnect-imask = <0xffffffff>;
+			xlnx,mplb-allow-lock-xfer = <1>;
+			xlnx,mplb-arb-mode = <0>;
+			xlnx,mplb-awidth = <0x20>;
+			xlnx,mplb-counter = <0x500>;
+			xlnx,mplb-dwidth = <0x80>;
+			xlnx,mplb-max-burst = <8>;
+			xlnx,mplb-native-dwidth = <0x80>;
+			xlnx,mplb-p2p = <0>;
+			xlnx,mplb-prio-dcur = <2>;
+			xlnx,mplb-prio-dcuw = <3>;
+			xlnx,mplb-prio-icu = <4>;
+			xlnx,mplb-prio-splb0 = <1>;
+			xlnx,mplb-prio-splb1 = <0>;
+			xlnx,mplb-read-pipe-enable = <1>;
+			xlnx,mplb-sync-tattribute = <0>;
+			xlnx,mplb-wdog-enable = <1>;
+			xlnx,mplb-write-pipe-enable = <1>;
+			xlnx,mplb-write-post-enable = <1>;
+			xlnx,num-dma = <1>;
+			xlnx,pir = <0xf>;
+			xlnx,ppc440mc-addr-base = <0>;
+			xlnx,ppc440mc-addr-high = <0xfffffff>;
+			xlnx,ppc440mc-arb-mode = <0>;
+			xlnx,ppc440mc-bank-conflict-mask = <0xc00000>;
+			xlnx,ppc440mc-control = <0xf810008f>;
+			xlnx,ppc440mc-max-burst = <8>;
+			xlnx,ppc440mc-prio-dcur = <2>;
+			xlnx,ppc440mc-prio-dcuw = <3>;
+			xlnx,ppc440mc-prio-icu = <4>;
+			xlnx,ppc440mc-prio-splb0 = <1>;
+			xlnx,ppc440mc-prio-splb1 = <0>;
+			xlnx,ppc440mc-row-conflict-mask = <0x3ffe00>;
+			xlnx,ppcdm-asyncmode = <0>;
+			xlnx,ppcds-asyncmode = <0>;
+			xlnx,user-reset = <0>;
+			DMA0: sdma@80 {
+				compatible = "xlnx,ll-dma-1.00.a";
+				dcr-reg = < 0x80 0x11 >;
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 9 2 0xa 2 >;
+			} ;
+		} ;
+	} ;
+	plb_v46_0: plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v46-1.02.a", "simple-bus";
+		ranges ;
+		DIP_Switches_8Bit: gpio@81460000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 6 2 >;
+			reg = < 0x81460000 0x10000 >;
+			xlnx,all-inputs = <1>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <8>;
+			xlnx,interrupt-present = <1>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,compound";
+			ethernet@81c00000 {
+				compatible = "xlnx,xps-ll-temac-1.01.b";
+				device_type = "network";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 5 2 >;
+				llink-connected = <&DMA0>;
+				local-mac-address = [ 02 00 00 00 00 00 ];
+				reg = < 0x81c00000 0x40 >;
+				xlnx,bus2core-clk-ratio = <1>;
+				xlnx,phy-type = <1>;
+				xlnx,phyaddr = <1>;
+				xlnx,rxcsum = <1>;
+				xlnx,rxfifo = <0x1000>;
+				xlnx,temac-type = <0>;
+				xlnx,txcsum = <1>;
+				xlnx,txfifo = <0x1000>;
+			} ;
+		} ;
+		LEDs_8Bit: gpio@81400000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			reg = < 0x81400000 0x10000 >;
+			xlnx,all-inputs = <0>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <8>;
+			xlnx,interrupt-present = <0>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		LEDs_Positions: gpio@81420000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			reg = < 0x81420000 0x10000 >;
+			xlnx,all-inputs = <0>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <5>;
+			xlnx,interrupt-present = <0>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		Push_Buttons_5Bit: gpio@81440000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 7 2 >;
+			reg = < 0x81440000 0x10000 >;
+			xlnx,all-inputs = <1>;
+			xlnx,all-inputs-2 = <0>;
+			xlnx,dout-default = <0>;
+			xlnx,dout-default-2 = <0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <5>;
+			xlnx,interrupt-present = <1>;
+			xlnx,is-bidir = <1>;
+			xlnx,is-bidir-2 = <1>;
+			xlnx,is-dual = <0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+		} ;
+		RS232_Uart_1: serial@83e00000 {
+			clock-frequency = <100000000>;
+			compatible = "xlnx,xps-uart16550-2.00.a", "ns16550";
+			current-speed = <0x2580>;
+			device_type = "serial";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 8 2 >;
+			reg = < 0x83e00000 0x10000 >;
+			reg-offset = <3>;
+			reg-shift = <2>;
+			xlnx,family = "virtex5";
+			xlnx,has-external-rclk = <0>;
+			xlnx,has-external-xin = <0>;
+			xlnx,is-a-16550 = <1>;
+		} ;
+		SysACE_CompactFlash: sysace@83600000 {
+			compatible = "xlnx,xps-sysace-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 4 2 >;
+			reg = < 0x83600000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,mem-width = <0x10>;
+		} ;
+		xps_bram_if_cntlr_1: xps-bram-if-cntlr@ffff0000 {
+			compatible = "xlnx,xps-bram-if-cntlr-1.00.a";
+			reg = < 0xffff0000 0x10000 >;
+			xlnx,family = "virtex5";
+		} ;
+		xps_intc_0: interrupt-controller@81800000 {
+			#interrupt-cells = <2>;
+			compatible = "xlnx,xps-intc-1.00.a";
+			interrupt-controller ;
+			reg = < 0x81800000 0x10000 >;
+			xlnx,num-intr-inputs = <0xb>;
+		} ;
+		xps_timebase_wdt_1: xps-timebase-wdt@83a00000 {
+			compatible = "xlnx,xps-timebase-wdt-1.00.b";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 2 0 1 2 >;
+			reg = < 0x83a00000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,wdt-enable-once = <0>;
+			xlnx,wdt-interval = <0x1e>;
+		} ;
+		xps_timer_1: timer@83c00000 {
+			compatible = "xlnx,xps-timer-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 3 2 >;
+			reg = < 0x83c00000 0x10000 >;
+			xlnx,count-width = <0x20>;
+			xlnx,family = "virtex5";
+			xlnx,gen0-assert = <1>;
+			xlnx,gen1-assert = <1>;
+			xlnx,one-timer-only = <1>;
+			xlnx,trig0-assert = <1>;
+			xlnx,trig1-assert = <1>;
+		} ;
+	} ;
+}  ;
diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts
index a328607c8f84..4a9f726ada13 100644
--- a/arch/powerpc/boot/dts/walnut.dts
+++ b/arch/powerpc/boot/dts/walnut.dts
@@ -9,12 +9,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
 	model = "ibm,walnut";
 	compatible = "ibm,walnut";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC;
@@ -29,13 +31,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,405GP";
-			reg = <0>;
-			clock-frequency = <bebc200>; /* Filled in by zImage */
+			reg = <0x00000000>;
+			clock-frequency = <200000000>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <4000>;
-			d-cache-size = <4000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <16384>;
+			d-cache-size = <16384>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -43,14 +45,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller {
 		compatible = "ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 9>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -65,63 +67,63 @@
 
 		SDRAM0: memory-controller {
 			compatible = "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		MAL: mcmal {
 			compatible = "ibm,mcmal-405gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <1>;
 			num-rx-chans = <1>;
 			interrupt-parent = <&UIC0>;
 			interrupts = <
-				b 4 /* TXEOB */
-				c 4 /* RXEOB */
-				a 4 /* SERR */
-				d 4 /* TXDE */
-				e 4 /* RXDE */>;
+				0xb 0x4 /* TXEOB */
+				0xc 0x4 /* RXEOB */
+				0xa 0x4 /* SERR */
+				0xd 0x4 /* TXDE */
+				0xe 0x4 /* RXDE */>;
 		};
 
 		POB0: opb {
 			compatible = "ibm,opb-405gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <ef600000 ef600000 a00000>;
-			dcr-reg = <0a0 5>;
+			ranges = <0xef600000 0xef600000 0x00a00000>;
+			dcr-reg = <0x0a0 0x005>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <2580>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <2580>;
+				current-speed = <9600>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			IIC: i2c@ef600500 {
 				compatible = "ibm,iic-405gp", "ibm,iic";
-				reg = <ef600500 11>;
+				reg = <0xef600500 0x00000011>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			GPIO: gpio@ef600700 {
 				compatible = "ibm,gpio-405gp";
-				reg = <ef600700 20>;
+				reg = <0xef600700 0x00000020>;
 			};
 
 			EMAC: ethernet@ef600800 {
@@ -129,26 +131,26 @@
 				compatible = "ibm,emac-405gp", "ibm,emac";
 				interrupt-parent = <&UIC0>;
 				interrupts = <
-					f 4 /* Ethernet */
-					9 4 /* Ethernet Wake Up */>;
+					0xf 0x4 /* Ethernet */
+					0x9 0x4 /* Ethernet Wake Up */>;
 				local-mac-address = [000000000000]; /* Filled in by zImage */
-				reg = <ef600800 70>;
+				reg = <0xef600800 0x00000070>;
 				mal-device = <&MAL>;
 				mal-tx-channel = <0>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000001>;
+				phy-map = <0x00000001>;
 			};
 
 		};
 
 		EBC0: ebc {
 			compatible = "ibm,ebc-405gp", "ibm,ebc";
-			dcr-reg = <012 2>;
+			dcr-reg = <0x012 0x002>;
 			#address-cells = <2>;
 			#size-cells = <1>;
 			/* The ranges property is supplied by the bootwrapper
@@ -158,18 +160,18 @@
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			sram@0,0 {
-				reg = <0 0 80000>;
+				reg = <0x00000000 0x00000000 0x00080000>;
 			};
 
 			flash@0,80000 {
 				compatible = "jedec-flash";
 				bank-width = <1>;
-				reg = <0 80000 80000>;
+				reg = <0x00000000 0x00080000 0x00080000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				partition@0 {
 					label = "OpenBIOS";
-					reg = <0 80000>;
+					reg = <0x00000000 0x00080000>;
 					read-only;
 				};
 			};
@@ -177,24 +179,24 @@
 			nvram@1,0 {
 				/* NVRAM and RTC */
 				compatible = "ds1743-nvram";
-				#bytes = <2000>;
-				reg = <1 0 2000>;
+				#bytes = <0x2000>;
+				reg = <0x00000001 0x00000000 0x00002000>;
 			};
 
 			keyboard@2,0 {
 				compatible = "intel,82C42PC";
-				reg = <2 0 2>;
+				reg = <0x00000002 0x00000000 0x00000002>;
 			};
 
 			ir@3,0 {
 				compatible = "ti,TIR2000PAG";
-				reg = <3 0 10>;
+				reg = <0x00000003 0x00000000 0x00000010>;
 			};
 
 			fpga@7,0 {
 				compatible = "Walnut-FPGA";
-				reg = <7 0 10>;
-				virtual-reg = <f0300005>;
+				reg = <0x00000007 0x00000000 0x00000010>;
+				virtual-reg = <0xf0300005>;
 			};
 		};
 
@@ -205,35 +207,35 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb405gp-pci", "ibm,plb-pci";
 			primary;
-			reg = <eec00000 8	/* Config space access */
-			       eed80000 4	/* IACK */
-			       eed80000 4	/* Special cycle */
-			       ef480000 40>;	/* Internal registers */
+			reg = <0xeec00000 0x00000008	/* Config space access */
+			       0xeed80000 0x00000004	/* IACK */
+			       0xeed80000 0x00000004	/* Special cycle */
+			       0xef480000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 80000000 80000000 0 20000000
-				  01000000 0 00000000 e8000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* Walnut has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 0 &UIC0 1c 8
+				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 0 &UIC0 1d 8
+				0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
 
 				/* IDSEL 3 */
-				1800 0 0 0 &UIC0 1e 8
+				0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
 
 				/* IDSEL 4 */
-				2000 0 0 0 &UIC0 1f 8
+				0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts
index b04a52e22bf5..340018cf16b7 100644
--- a/arch/powerpc/boot/dts/warp.dts
+++ b/arch/powerpc/boot/dts/warp.dts
@@ -9,12 +9,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "pika,warp";
 	compatible = "pika,warp";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -28,13 +30,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440EP";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -42,14 +44,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -59,22 +61,22 @@
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -86,86 +88,79 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
 		};
 
 		POB0: opb {
 		  	compatible = "ibm,opb-440ep", "ibm,opb-440gp", "ibm,opb";
 			#address-cells = <1>;
 			#size-cells = <1>;
-		  	ranges = <00000000 0 00000000 80000000
-			          80000000 0 80000000 80000000>;
+		  	ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
 		  	interrupt-parent = <&UIC1>;
-		  	interrupts = <7 4>;
+		  	interrupts = <0x7 0x4>;
 		  	clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 
 				fpga@2,0 {
 					compatible = "pika,fpga";
-			   		reg = <2 0 2200>;
-					interrupts = <18 8>;
+			   		reg = <0x00000002 0x00000000 0x00001000>;
+					interrupts = <0x18 0x8>;
 					interrupt-parent = <&UIC0>;
 				};
 
+				fpga@2,4000 {
+					compatible = "pika,fpga-sd";
+					reg = <0x00000002 0x00004000 0x00000A00>;
+				};
+
 				nor_flash@0,0 {
-					compatible = "amd,s29gl512n", "cfi-flash";
+					compatible = "amd,s29gl032a", "cfi-flash";
 					bank-width = <2>;
-					reg = <0 0 4000000>;
+					reg = <0x00000000 0x00000000 0x00400000>;
 					#address-cells = <1>;
 					#size-cells = <1>;
-					partition@0 {
-						label = "kernel";
-						reg = <0 180000>;
-					};
-					partition@180000 {
-						label = "root";
-						reg = <180000 3480000>;
-					};
-					partition@3600000 {
-						label = "user";
-						reg = <3600000 900000>;
-					};
-					partition@3f00000 {
+					partition@300000 {
 						label = "fpga";
-						reg = <3f00000 40000>;
+						reg = <0x0030000 0x00040000>;
 					};
-					partition@3f40000 {
+					partition@340000 {
 						label = "env";
-						reg = <3f40000 40000>;
+						reg = <0x0340000 0x00040000>;
 					};
-					partition@3f80000 {
+					partition@380000 {
 						label = "u-boot";
-						reg = <3f80000 80000>;
+						reg = <0x0380000 0x00080000>;
 					};
 				};
 			};
@@ -173,60 +168,80 @@
 			UART0: serial@ef600300 {
 		   		device_type = "serial";
 		   		compatible = "ns16550";
-		   		reg = <ef600300 8>;
-		   		virtual-reg = <ef600300>;
+		   		reg = <0xef600300 0x00000008>;
+		   		virtual-reg = <0xef600300>;
 		   		clock-frequency = <0>; /* Filled in by zImage */
-		   		current-speed = <1c200>;
+		   		current-speed = <115200>;
 		   		interrupt-parent = <&UIC0>;
-		   		interrupts = <0 4>;
+		   		interrupts = <0x0 0x4>;
 	   		};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
+				index = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ad7414@4a {
+					compatible = "adi,ad7414";
+					reg = <0x4a>;
+					interrupts = <0x19 0x8>;
+					interrupt-parent = <&UIC0>;
+				};
 			};
 
 			GPIO0: gpio@ef600b00 {
 				compatible = "ibm,gpio-440ep";
-				reg = <ef600b00 48>;
+				reg = <0xef600b00 0x00000048>;
+				#gpio-cells = <2>;
+				gpio-controller;
 			};
 
 			GPIO1: gpio@ef600c00 {
 				compatible = "ibm,gpio-440ep";
-				reg = <ef600c00 48>;
+				reg = <0xef600c00 0x00000048>;
+				#gpio-cells = <2>;
+				gpio-controller;
+
+				led@31 {
+					compatible = "linux,gpio-led";
+					linux,name = ":green:";
+					gpios = <&GPIO1 0x30 0>;
+				};
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <ef600e00 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0 1>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
 
 			usb@ef601000 {
 				compatible = "ohci-be";
-				reg = <ef601000 80>;
-				interrupts = <8 1 9 1>;
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x1 0x9 0x1>;
 				interrupt-parent = < &UIC1 >;
 			};
 		};
diff --git a/arch/powerpc/boot/dts/yosemite.dts b/arch/powerpc/boot/dts/yosemite.dts
index 0d6d332814e0..e39422aa0d85 100644
--- a/arch/powerpc/boot/dts/yosemite.dts
+++ b/arch/powerpc/boot/dts/yosemite.dts
@@ -9,12 +9,14 @@
  * any warranty of any kind, whether express or implied.
  */
 
+/dts-v1/;
+
 / {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	model = "amcc,yosemite";
 	compatible = "amcc,yosemite","amcc,bamboo";
-	dcr-parent = <&/cpus/cpu@0>;
+	dcr-parent = <&{/cpus/cpu@0}>;
 
 	aliases {
 		ethernet0 = &EMAC0;
@@ -32,13 +34,13 @@
 		cpu@0 {
 			device_type = "cpu";
 			model = "PowerPC,440EP";
-			reg = <0>;
+			reg = <0x00000000>;
 			clock-frequency = <0>; /* Filled in by zImage */
 			timebase-frequency = <0>; /* Filled in by zImage */
-			i-cache-line-size = <20>;
-			d-cache-line-size = <20>;
-			i-cache-size = <8000>;
-			d-cache-size = <8000>;
+			i-cache-line-size = <32>;
+			d-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
 			dcr-controller;
 			dcr-access-method = "native";
 		};
@@ -46,14 +48,14 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0 0 0>; /* Filled in by zImage */
+		reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by zImage */
 	};
 
 	UIC0: interrupt-controller0 {
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <0>;
-		dcr-reg = <0c0 009>;
+		dcr-reg = <0x0c0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
@@ -63,22 +65,22 @@
 		compatible = "ibm,uic-440ep","ibm,uic";
 		interrupt-controller;
 		cell-index = <1>;
-		dcr-reg = <0d0 009>;
+		dcr-reg = <0x0d0 0x009>;
 		#address-cells = <0>;
 		#size-cells = <0>;
 		#interrupt-cells = <2>;
-		interrupts = <1e 4 1f 4>; /* cascade */
+		interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
 		interrupt-parent = <&UIC0>;
 	};
 
 	SDR0: sdr {
 		compatible = "ibm,sdr-440ep";
-		dcr-reg = <00e 002>;
+		dcr-reg = <0x00e 0x002>;
 	};
 
 	CPR0: cpr {
 		compatible = "ibm,cpr-440ep";
-		dcr-reg = <00c 002>;
+		dcr-reg = <0x00c 0x002>;
 	};
 
 	plb {
@@ -90,29 +92,29 @@
 
 		SDRAM0: sdram {
 			compatible = "ibm,sdram-440ep", "ibm,sdram-405gp";
-			dcr-reg = <010 2>;
+			dcr-reg = <0x010 0x002>;
 		};
 
 		DMA0: dma {
 			compatible = "ibm,dma-440ep", "ibm,dma-440gp";
-			dcr-reg = <100 027>;
+			dcr-reg = <0x100 0x027>;
 		};
 
 		MAL0: mcmal {
 			compatible = "ibm,mcmal-440ep", "ibm,mcmal-440gp", "ibm,mcmal";
-			dcr-reg = <180 62>;
+			dcr-reg = <0x180 0x062>;
 			num-tx-chans = <4>;
 			num-rx-chans = <2>;
 			interrupt-parent = <&MAL0>;
-			interrupts = <0 1 2 3 4>;
+			interrupts = <0x0 0x1 0x2 0x3 0x4>;
 			#interrupt-cells = <1>;
 			#address-cells = <0>;
 			#size-cells = <0>;
-			interrupt-map = </*TXEOB*/ 0 &UIC0 a 4
-					/*RXEOB*/ 1 &UIC0 b 4
-					/*SERR*/  2 &UIC1 0 4
-					/*TXDE*/  3 &UIC1 1 4
-					/*RXDE*/  4 &UIC1 2 4>;
+			interrupt-map = </*TXEOB*/ 0x0 &UIC0 0xa 0x4
+					/*RXEOB*/ 0x1 &UIC0 0xb 0x4
+					/*SERR*/  0x2 &UIC1 0x0 0x4
+					/*TXDE*/  0x3 &UIC1 0x1 0x4
+					/*RXDE*/  0x4 &UIC1 0x2 0x4>;
 		};
 
 		POB0: opb {
@@ -122,110 +124,110 @@
 			/* Bamboo is oddball in the 44x world and doesn't use the ERPN
 			 * bits.
 			 */
-			ranges = <00000000 0 00000000 80000000
-			          80000000 0 80000000 80000000>;
+			ranges = <0x00000000 0x00000000 0x00000000 0x80000000
+			          0x80000000 0x00000000 0x80000000 0x80000000>;
 			interrupt-parent = <&UIC1>;
-			interrupts = <7 4>;
+			interrupts = <0x7 0x4>;
 			clock-frequency = <0>; /* Filled in by zImage */
 
 			EBC0: ebc {
 				compatible = "ibm,ebc-440ep", "ibm,ebc-440gp", "ibm,ebc";
-				dcr-reg = <012 2>;
+				dcr-reg = <0x012 0x002>;
 				#address-cells = <2>;
 				#size-cells = <1>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				interrupts = <5 1>;
+				interrupts = <0x5 0x1>;
 				interrupt-parent = <&UIC1>;
 			};
 
 			UART0: serial@ef600300 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600300 8>;
-				virtual-reg = <ef600300>;
+				reg = <0xef600300 0x00000008>;
+				virtual-reg = <0xef600300>;
 				clock-frequency = <0>; /* Filled in by zImage */
-				current-speed = <1c200>;
+				current-speed = <115200>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <0 4>;
+				interrupts = <0x0 0x4>;
 			};
 
 			UART1: serial@ef600400 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600400 8>;
-				virtual-reg = <ef600400>;
+				reg = <0xef600400 0x00000008>;
+				virtual-reg = <0xef600400>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <1 4>;
+				interrupts = <0x1 0x4>;
 			};
 
 			UART2: serial@ef600500 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600500 8>;
-				virtual-reg = <ef600500>;
+				reg = <0xef600500 0x00000008>;
+				virtual-reg = <0xef600500>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <3 4>;
+				interrupts = <0x3 0x4>;
 				status = "disabled";
 			};
 
 			UART3: serial@ef600600 {
 				device_type = "serial";
 				compatible = "ns16550";
-				reg = <ef600600 8>;
-				virtual-reg = <ef600600>;
+				reg = <0xef600600 0x00000008>;
+				virtual-reg = <0xef600600>;
 				clock-frequency = <0>;
 				current-speed = <0>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <4 4>;
+				interrupts = <0x4 0x4>;
 				status = "disabled";
 			};
 
 			IIC0: i2c@ef600700 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600700 14>;
+				reg = <0xef600700 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <2 4>;
+				interrupts = <0x2 0x4>;
 			};
 
 			IIC1: i2c@ef600800 {
 				compatible = "ibm,iic-440ep", "ibm,iic-440gp", "ibm,iic";
-				reg = <ef600800 14>;
+				reg = <0xef600800 0x00000014>;
 				interrupt-parent = <&UIC0>;
-				interrupts = <7 4>;
+				interrupts = <0x7 0x4>;
 			};
 
 			spi@ef600900 {
 				compatible = "amcc,spi-440ep";
-				reg = <ef600900 6>;
-				interrupts = <8 4>;
+				reg = <0xef600900 0x00000006>;
+				interrupts = <0x8 0x4>;
 				interrupt-parent = <&UIC0>;
 			};
 
 			ZMII0: emac-zmii@ef600d00 {
 				compatible = "ibm,zmii-440ep", "ibm,zmii-440gp", "ibm,zmii";
-				reg = <ef600d00 c>;
+				reg = <0xef600d00 0x0000000c>;
 			};
 
 			EMAC0: ethernet@ef600e00 {
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1c 4 1d 4>;
-				reg = <ef600e00 70>;
+				interrupts = <0x1c 0x4 0x1d 0x4>;
+				reg = <0xef600e00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <0 1>;
 				mal-rx-channel = <0>;
 				cell-index = <0>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <0>;
 			};
@@ -234,26 +236,26 @@
 				device_type = "network";
 				compatible = "ibm,emac-440ep", "ibm,emac-440gp", "ibm,emac";
 				interrupt-parent = <&UIC1>;
-				interrupts = <1e 4 1f 4>;
-				reg = <ef600f00 70>;
+				interrupts = <0x1e 0x4 0x1f 0x4>;
+				reg = <0xef600f00 0x00000070>;
 				local-mac-address = [000000000000];
 				mal-device = <&MAL0>;
 				mal-tx-channel = <2 3>;
 				mal-rx-channel = <1>;
 				cell-index = <1>;
-				max-frame-size = <5dc>;
-				rx-fifo-size = <1000>;
-				tx-fifo-size = <800>;
+				max-frame-size = <1500>;
+				rx-fifo-size = <4096>;
+				tx-fifo-size = <2048>;
 				phy-mode = "rmii";
-				phy-map = <00000000>;
+				phy-map = <0x00000000>;
 				zmii-device = <&ZMII0>;
 				zmii-channel = <1>;
 			};
 
 			usb@ef601000 {
 				compatible = "ohci-be";
-				reg = <ef601000 80>;
-				interrupts = <8 4 9 4>;
+				reg = <0xef601000 0x00000080>;
+				interrupts = <0x8 0x4 0x9 0x4>;
 				interrupt-parent = < &UIC1 >;
 			};
 		};
@@ -265,35 +267,35 @@
 			#address-cells = <3>;
 			compatible = "ibm,plb440ep-pci", "ibm,plb-pci";
 			primary;
-			reg = <0 eec00000 8	/* Config space access */
-			       0 eed00000 4	/* IACK */
-			       0 eed00000 4	/* Special cycle */
-			       0 ef400000 40>;	/* Internal registers */
+			reg = <0x00000000 0xeec00000 0x00000008	/* Config space access */
+			       0x00000000 0xeed00000 0x00000004	/* IACK */
+			       0x00000000 0xeed00000 0x00000004	/* Special cycle */
+			       0x00000000 0xef400000 0x00000040>;	/* Internal registers */
 
 			/* Outbound ranges, one memory and one IO,
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 a0000000 0 a0000000 0 20000000
-				  01000000 0 00000000 0 e8000000 0 00010000>;
+			ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
+				  0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
 
 			/* Inbound 2GB range starting at 0 */
-			dma-ranges = <42000000 0 0 0 0 0 80000000>;
+			dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
 
 			/* Bamboo has all 4 IRQ pins tied together per slot */
-			interrupt-map-mask = <f800 0 0 0>;
+			interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
 			interrupt-map = <
 				/* IDSEL 1 */
-				0800 0 0 0 &UIC0 1c 8
+				0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
 
 				/* IDSEL 2 */
-				1000 0 0 0 &UIC0 1b 8
+				0x1000 0x0 0x0 0x0 &UIC0 0x1b 0x8
 
 				/* IDSEL 3 */
-				1800 0 0 0 &UIC0 1a 8
+				0x1800 0x0 0x0 0x0 &UIC0 0x1a 0x8
 
 				/* IDSEL 4 */
-				2000 0 0 0 &UIC0 19 8
+				0x2000 0x0 0x0 0x0 &UIC0 0x19 0x8
 			>;
 		};
 	};
diff --git a/arch/powerpc/boot/io.h b/arch/powerpc/boot/io.h
index ccaedaec50d5..7c09f4861fe1 100644
--- a/arch/powerpc/boot/io.h
+++ b/arch/powerpc/boot/io.h
@@ -6,7 +6,7 @@
 /*
  * Low-level I/O routines.
  *
- * Copied from <file:include/asm-powerpc/io.h> (which has no copyright)
+ * Copied from <file:arch/powerpc/include/asm/io.h> (which has no copyright)
  */
 static inline int in_8(const volatile unsigned char *addr)
 {
diff --git a/arch/powerpc/boot/oflib.c b/arch/powerpc/boot/oflib.c
index 95b8fd69a403..b0ec9cf3eaaf 100644
--- a/arch/powerpc/boot/oflib.c
+++ b/arch/powerpc/boot/oflib.c
@@ -168,8 +168,19 @@ void *of_claim(unsigned long virt, unsigned long size, unsigned long align)
 
 void *of_vmlinux_alloc(unsigned long size)
 {
-	void *p = malloc(size);
-
+	unsigned long start = (unsigned long)_start, end = (unsigned long)_end;
+	void *addr;
+	void *p;
+
+	/* With some older POWER4 firmware we need to claim the area the kernel
+	 * will reside in.  Newer firmwares don't need this so we just ignore
+	 * the return value.
+	 */
+	addr = of_claim(start, end - start, 0);
+	printf("Trying to claim from 0x%lx to 0x%lx (0x%lx) got %p\r\n",
+	       start, end, end - start, addr);
+
+	p = malloc(size);
 	if (!p)
 		fatal("Can't allocate memory for kernel image!\n\r");
 
diff --git a/arch/powerpc/boot/redboot-83xx.c b/arch/powerpc/boot/redboot-83xx.c
new file mode 100644
index 000000000000..79aa9e151fa7
--- /dev/null
+++ b/arch/powerpc/boot/redboot-83xx.c
@@ -0,0 +1,60 @@
+/*
+ * RedBoot firmware support
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ * Copyright (c) 2008 Codehermit
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "stdio.h"
+#include "redboot.h"
+#include "fsl-soc.h"
+#include "io.h"
+
+static bd_t bd;
+BSS_STACK(4096);
+
+#define MHZ(x)	((x + 500000) / 1000000)
+
+static void platform_fixups(void)
+{
+	void *node;
+
+	dt_fixup_memory(bd.bi_memstart, bd.bi_memsize);
+	dt_fixup_mac_addresses(bd.bi_enetaddr);
+	dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 16, bd.bi_busfreq);
+
+	node = finddevice("/soc/cpm/brg");
+	if (node) {
+		printf("BRG clock-frequency <- 0x%x (%dMHz)\r\n",
+		       bd.bi_busfreq, MHZ(bd.bi_busfreq));
+		setprop(node, "clock-frequency",  &bd.bi_busfreq, 4);
+	}
+
+}
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+		   unsigned long r6, unsigned long r7)
+{
+	memcpy(&bd, (char *)r3, sizeof(bd));
+
+	if (bd.bi_tag != 0x42444944)
+		return;
+
+	simple_alloc_init(_end,
+			  bd.bi_memstart + bd.bi_memsize - (unsigned long)_end,
+			  32, 64);
+
+	fdt_init(_dtb_start);
+	serial_console_init();
+	platform_ops.fixups = platform_fixups;
+
+	loader_info.cmdline = (char *)bd.bi_cmdline;
+	loader_info.cmdline_len = strlen((char *)bd.bi_cmdline);
+}
diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c
index 86cd285bccc6..c58a0dada992 100644
--- a/arch/powerpc/boot/simpleboot.c
+++ b/arch/powerpc/boot/simpleboot.c
@@ -23,6 +23,8 @@
 
 BSS_STACK(4*1024);
 
+extern int platform_specific_init(void) __attribute__((weak));
+
 void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 		   unsigned long r6, unsigned long r7)
 {
@@ -80,5 +82,9 @@ void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 
 	/* prepare the device tree and find the console */
 	fdt_init(_dtb_start);
+
+	if (platform_specific_init)
+		platform_specific_init();
+
 	serial_console_init();
 }
diff --git a/arch/powerpc/boot/virtex.c b/arch/powerpc/boot/virtex.c
new file mode 100644
index 000000000000..f622805f8000
--- /dev/null
+++ b/arch/powerpc/boot/virtex.c
@@ -0,0 +1,100 @@
+/*
+ * The platform specific code for virtex devices since a boot loader is not
+ * always used.
+ *
+ * (C) Copyright 2008 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "ops.h"
+#include "io.h"
+#include "stdio.h"
+
+#define UART_DLL		0	/* Out: Divisor Latch Low */
+#define UART_DLM		1	/* Out: Divisor Latch High */
+#define UART_FCR		2	/* Out: FIFO Control Register */
+#define UART_FCR_CLEAR_RCVR 	0x02 	/* Clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT	0x04 	/* Clear the XMIT FIFO */
+#define UART_LCR		3	/* Out: Line Control Register */
+#define UART_MCR		4	/* Out: Modem Control Register */
+#define UART_MCR_RTS		0x02 	/* RTS complement */
+#define UART_MCR_DTR		0x01 	/* DTR complement */
+#define UART_LCR_DLAB		0x80 	/* Divisor latch access bit */
+#define UART_LCR_WLEN8		0x03 	/* Wordlength: 8 bits */
+
+static int virtex_ns16550_console_init(void *devp)
+{
+	unsigned char *reg_base;
+	u32 reg_shift, reg_offset, clk, spd;
+	u16 divisor;
+	int n;
+
+	if (dt_get_virtual_reg(devp, (void **)&reg_base, 1) < 1)
+		return -1;
+
+	n = getprop(devp, "reg-offset", &reg_offset, sizeof(reg_offset));
+	if (n == sizeof(reg_offset))
+		reg_base += reg_offset;
+
+	n = getprop(devp, "reg-shift", &reg_shift, sizeof(reg_shift));
+	if (n != sizeof(reg_shift))
+		reg_shift = 0;
+
+	n = getprop(devp, "current-speed", (void *)&spd, sizeof(spd));
+	if (n != sizeof(spd))
+		spd = 9600;
+
+	/* should there be a default clock rate?*/
+	n = getprop(devp, "clock-frequency", (void *)&clk, sizeof(clk));
+	if (n != sizeof(clk))
+		return -1;
+
+	divisor = clk / (16 * spd);
+
+	/* Access baud rate */
+	out_8(reg_base + (UART_LCR << reg_shift), UART_LCR_DLAB);
+
+	/* Baud rate based on input clock */
+	out_8(reg_base + (UART_DLL << reg_shift), divisor & 0xFF);
+	out_8(reg_base + (UART_DLM << reg_shift), divisor >> 8);
+
+	/* 8 data, 1 stop, no parity */
+	out_8(reg_base + (UART_LCR << reg_shift), UART_LCR_WLEN8);
+
+	/* RTS/DTR */
+	out_8(reg_base + (UART_MCR << reg_shift), UART_MCR_RTS | UART_MCR_DTR);
+
+	/* Clear transmitter and receiver */
+	out_8(reg_base + (UART_FCR << reg_shift),
+				UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR);
+	return 0;
+}
+
+/* For virtex, the kernel may be loaded without using a bootloader and if so
+   some UARTs need more setup than is provided in the normal console init
+*/
+int platform_specific_init(void)
+{
+	void *devp;
+	char devtype[MAX_PROP_LEN];
+	char path[MAX_PATH_LEN];
+
+	devp = finddevice("/chosen");
+	if (devp == NULL)
+		return -1;
+
+	if (getprop(devp, "linux,stdout-path", path, MAX_PATH_LEN) > 0) {
+		devp = finddevice(path);
+		if (devp == NULL)
+			return -1;
+
+		if ((getprop(devp, "device_type", devtype, sizeof(devtype)) > 0)
+				&& !strcmp(devtype, "serial")
+				&& (dt_is_compatible(devp, "ns16550")))
+				virtex_ns16550_console_init(devp);
+	}
+	return 0;
+}
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index d6c96d9ab291..644bf9d4ea00 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -138,14 +138,20 @@ objflags=-S
 tmp=$tmpdir/zImage.$$.o
 ksection=.kernel:vmlinux.strip
 isection=.kernel:initrd
+link_address='0x400000'
 
 case "$platform" in
-pmac|pseries|chrp)
+pseries)
+    platformo=$object/of.o
+    link_address='0x4000000'
+    ;;
+pmac|chrp)
     platformo=$object/of.o
     ;;
 coff)
     platformo=$object/of.o
     lds=$object/zImage.coff.lds
+    link_address='0x500000'
     ;;
 miboot|uboot)
     # miboot and U-boot want just the bare bits, not an ELF binary
@@ -171,13 +177,13 @@ cuboot*)
     *-mpc824*)
         platformo=$object/cuboot-824x.o
         ;;
-    *-mpc83*)
+    *-mpc83*|*-asp834x*)
         platformo=$object/cuboot-83xx.o
         ;;
     *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
         platformo=$object/cuboot-85xx-cpm2.o
         ;;
-    *-mpc85*|*-tqm8540|*-sbc85*)
+    *-mpc85*|*-tqm85*|*-sbc85*)
         platformo=$object/cuboot-85xx.o
         ;;
     esac
@@ -190,6 +196,7 @@ ps3)
     objflags="-O binary --set-section-flags=.bss=contents,alloc,load,data"
     ksection=.kernel:vmlinux.bin
     isection=.kernel:initrd
+    link_address=''
     ;;
 ep88xc|ep405|ep8248e)
     platformo="$object/fixed-head.o $object/$platform.o"
@@ -200,7 +207,19 @@ adder875-redboot)
     binary=y
     ;;
 simpleboot-virtex405-*)
-    platformo="$object/virtex405-head.o $object/simpleboot.o"
+    platformo="$object/virtex405-head.o $object/simpleboot.o $object/virtex.o"
+    binary=y
+    ;;
+simpleboot-virtex440-*)
+    platformo="$object/simpleboot.o $object/virtex.o"
+    binary=y
+    ;;
+simpleboot-*)
+    platformo="$object/simpleboot.o"
+    binary=y
+    ;;
+asp834x-redboot)
+    platformo="$object/fixed-head.o $object/redboot-83xx.o"
     binary=y
     ;;
 esac
@@ -268,7 +287,10 @@ if [ -n "$dtb" ]; then
 fi
 
 if [ "$platform" != "miboot" ]; then
-    ${CROSS}ld -m elf32ppc -T $lds -o "$ofile" \
+    if [ -n "$link_address" ] ; then
+        text_start="-Ttext $link_address --defsym _start=$link_address"
+    fi
+    ${CROSS}ld -m elf32ppc -T $lds $text_start -o "$ofile" \
 	$platformo $tmp $object/wrapper.a
     rm $tmp
 fi
diff --git a/arch/powerpc/boot/zImage.coff.lds.S b/arch/powerpc/boot/zImage.coff.lds.S
index fe87a90ce7f1..856dc78b14ef 100644
--- a/arch/powerpc/boot/zImage.coff.lds.S
+++ b/arch/powerpc/boot/zImage.coff.lds.S
@@ -3,7 +3,6 @@ ENTRY(_zimage_start_opd)
 EXTERN(_zimage_start_opd)
 SECTIONS
 {
-  . = (5*1024*1024);
   _start = .;
   .text      :
   {
diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S
index f6e380fdb388..0962d62bdb50 100644
--- a/arch/powerpc/boot/zImage.lds.S
+++ b/arch/powerpc/boot/zImage.lds.S
@@ -3,7 +3,6 @@ ENTRY(_zimage_start)
 EXTERN(_zimage_start)
 SECTIONS
 {
-  . = (4*1024*1024);
   _start = .;
   .text      :
   {
diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig
new file mode 100644
index 000000000000..9ce5cbc2a4e7
--- /dev/null
+++ b/arch/powerpc/configs/44x/sam440ep_defconfig
@@ -0,0 +1,1192 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25
+# Mon May  5 13:43:02 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+CONFIG_SAM440EP=y
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+CONFIG_440EP=y
+CONFIG_IBM440EP_ERR42=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=35000
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+CONFIG_IBM_NEW_EMAC=y
+CONFIG_IBM_NEW_EMAC_RXB=128
+CONFIG_IBM_NEW_EMAC_TXB=64
+CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32
+CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256
+CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0
+# CONFIG_IBM_NEW_EMAC_DEBUG is not set
+CONFIG_IBM_NEW_EMAC_ZMII=y
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_IBM_IIC=y
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_MON is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+CONFIG_RTC_DRV_M41T80=y
+CONFIG_RTC_DRV_M41T80_WDT=y
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig
index 087aedce1338..e53c92655bd6 100644
--- a/arch/powerpc/configs/44x/taishan_defconfig
+++ b/arch/powerpc/configs/44x/taishan_defconfig
@@ -348,7 +348,83 @@ CONFIG_FW_LOADER=y
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=y
 CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_BLKDEVS is not set
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -660,6 +736,7 @@ CONFIG_TMPFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig
new file mode 100644
index 000000000000..9c41f66b5a7d
--- /dev/null
+++ b/arch/powerpc/configs/44x/virtex5_defconfig
@@ -0,0 +1,1107 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc8
+# Wed Jul  2 15:36:41 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+CONFIG_44x=y
+# CONFIG_E200 is not set
+CONFIG_4xx=y
+CONFIG_BOOKE=y
+CONFIG_PTE_64BIT=y
+CONFIG_PHYS_64BIT=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_PPC_DCR_NATIVE=y
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_PPC_DCR=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+# CONFIG_PPC4xx_PCI_EXPRESS is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_BAMBOO is not set
+# CONFIG_EBONY is not set
+# CONFIG_SEQUOIA is not set
+# CONFIG_TAISHAN is not set
+# CONFIG_KATMAI is not set
+# CONFIG_RAINIER is not set
+# CONFIG_WARP is not set
+# CONFIG_CANYONLANDS is not set
+# CONFIG_YOSEMITE is not set
+CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
+CONFIG_XILINX_VIRTEX=y
+CONFIG_XILINX_VIRTEX_5_FXT=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE=""
+CONFIG_EXTRA_TARGETS=""
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_4xx_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_QUEUE is not set
+CONFIG_IP_NF_IPTABLES=m
+# CONFIG_IP_NF_MATCH_RECENT is not set
+# CONFIG_IP_NF_MATCH_ECN is not set
+# CONFIG_IP_NF_MATCH_AH is not set
+# CONFIG_IP_NF_MATCH_TTL is not set
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+CONFIG_IP_NF_FILTER=m
+# CONFIG_IP_NF_TARGET_REJECT is not set
+# CONFIG_IP_NF_TARGET_LOG is not set
+# CONFIG_IP_NF_TARGET_ULOG is not set
+CONFIG_IP_NF_MANGLE=m
+# CONFIG_IP_NF_TARGET_ECN is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_XILINX_SYSACE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_XILINX_HWICAP=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_IBM_IIC is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+CONFIG_I2C_DEBUG_CORE=y
+CONFIG_I2C_DEBUG_ALGO=y
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+CONFIG_FB_XILINX=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+# CONFIG_PROC_KCORE is not set
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
new file mode 100644
index 000000000000..d2c435f0da42
--- /dev/null
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -0,0 +1,1128 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc2
+# Mon May 19 21:12:32 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_FSL_EMB_PERFMON is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
+# CONFIG_MPC832x_MDS is not set
+# CONFIG_MPC832x_RDB is not set
+# CONFIG_MPC834x_MDS is not set
+# CONFIG_MPC834x_ITX is not set
+# CONFIG_MPC836x_MDS is not set
+CONFIG_MPC836x_RDK=y
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_IPIC=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_QUICC_ENGINE=y
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_LBC=y
+CONFIG_FSL_GTM=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_GEOMETRY is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_BROADCOM_PHY=y
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_GIANFAR is not set
+CONFIG_UCC_GETH=y
+CONFIG_UGETH_NAPI=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_FILTERING is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_QE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_MPC83xx=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_FSL_DIU is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+CONFIG_UCC_SLOW=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+CONFIG_QE_GPIO=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
+CONFIG_PPC_EARLY_DEBUG=y
+# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
+# CONFIG_PPC_EARLY_DEBUG_G5 is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
+# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
+# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
+# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
+# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
+# CONFIG_PPC_EARLY_DEBUG_44x is not set
+# CONFIG_PPC_EARLY_DEBUG_40x is not set
+# CONFIG_PPC_EARLY_DEBUG_CPM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
index 042a85ea7b72..a0583e5119f5 100644
--- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig
@@ -997,10 +997,12 @@ CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
index 03627cfebcb4..164fd9606ee6 100644
--- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig
@@ -997,10 +997,12 @@ CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
new file mode 100644
index 000000000000..b3b770be3cc9
--- /dev/null
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -0,0 +1,1225 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc5
+# Thu Jun 26 14:40:02 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+CONFIG_TQM8548=y
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+CONFIG_TQM85xx=y
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+CONFIG_PPC_CPM_NEW_BINDING=y
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+# CONFIG_PCIEASPM is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_ECC_SMC=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+CONFIG_MTD_NAND_FSL_UPM=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_IDEDISK is not set
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+CONFIG_BLK_DEV_VIA82CXXX=y
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/asp8347_defconfig b/arch/powerpc/configs/asp8347_defconfig
new file mode 100644
index 000000000000..60bb4d106c87
--- /dev/null
+++ b/arch/powerpc/configs/asp8347_defconfig
@@ -0,0 +1,1214 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.25-rc6
+# Tue May  6 02:21:00 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_FSL_EMB_PERFMON=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_REDBOOT=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MULTIPLATFORM is not set
+# CONFIG_PPC_82xx is not set
+CONFIG_PPC_83xx=y
+# CONFIG_PPC_86xx is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC83xx=y
+# CONFIG_MPC831x_RDB is not set
+# CONFIG_MPC832x_MDS is not set
+# CONFIG_MPC832x_RDB is not set
+# CONFIG_MPC834x_MDS is not set
+# CONFIG_MPC834x_ITX is not set
+# CONFIG_MPC836x_MDS is not set
+# CONFIG_MPC837x_MDS is not set
+# CONFIG_MPC837x_RDB is not set
+# CONFIG_SBC834x is not set
+CONFIG_ASP834x=y
+CONFIG_PPC_MPC834x=y
+CONFIG_IPIC=y
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_HIGHMEM_START=0xfe000000
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_BOOT_LOAD=0x00800000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_SK98LIN is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+# CONFIG_GFAR_NAPI is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+CONFIG_GEN_RTC=y
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_83xx_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+
+#
+# Conflicting RTC option has been selected, check GEN_RTC and RTC
+#
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+CONFIG_RTC_DRV_DS1374=y
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Userspace I/O
+#
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+# CONFIG_MSDOS_PARTITION is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+# CONFIG_CRYPTO_SEQIV is not set
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_XTS is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
new file mode 100644
index 000000000000..dc599c7e97d5
--- /dev/null
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -0,0 +1,1872 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc2
+# Thu May 15 11:00:14 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_NOT_COHERENT_CACHE=y
+CONFIG_CHECK_CACHE_COHERENCY=y
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_EMBEDDED6xx=y
+# CONFIG_LINKSTATION is not set
+# CONFIG_STORCENTER is not set
+# CONFIG_MPC7448HPC2 is not set
+# CONFIG_PPC_HOLLY is not set
+# CONFIG_PPC_PRPMC2800 is not set
+CONFIG_PPC_C2K=y
+CONFIG_MV64X60=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+
+#
+# CPU Frequency drivers
+#
+# CONFIG_TAU is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+CONFIG_HOTPLUG_PCI=y
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+CONFIG_HOTPLUG_PCI_SHPC=m
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_START=0xff100000
+CONFIG_CONSISTENT_SIZE=0x00200000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETLABEL is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+CONFIG_NETFILTER_XTABLES=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
+# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+# CONFIG_NETFILTER_XT_TARGET_SECMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
+# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
+# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_MAC is not set
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
+# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
+# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
+# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
+# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
+# CONFIG_NETFILTER_XT_MATCH_REALM is not set
+# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
+# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
+# CONFIG_NETFILTER_XT_MATCH_STRING is not set
+# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+# CONFIG_NETFILTER_XT_MATCH_U32 is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+# CONFIG_IP_NF_MATCH_AH is not set
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AH is not set
+# CONFIG_IP6_NF_MATCH_MH is not set
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+# CONFIG_IP6_NF_TARGET_REJECT is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+# CONFIG_BRIDGE_EBT_ULOG is not set
+# CONFIG_BRIDGE_EBT_NFLOG is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+# CONFIG_ATM_MPOA is not set
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+# CONFIG_NET_SCH_RR is not set
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+# CONFIG_NET_CLS_BASIC is not set
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+# CONFIG_CLS_U32_MARK is not set
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+# CONFIG_NET_CLS_FLOW is not set
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_CMTP=m
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+CONFIG_BT_HCIBCM203X=m
+# CONFIG_BT_HCIBPA10X is not set
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=m
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+CONFIG_MTD_CFI_I4=y
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=m
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=m
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+CONFIG_BLK_DEV_3W_XXXX_RAID=m
+CONFIG_SCSI_3W_9XXX=m
+CONFIG_SCSI_ACARD=m
+CONFIG_SCSI_AACRAID=m
+CONFIG_SCSI_AIC7XXX=m
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_AIC7XXX_DEBUG_MASK=0
+# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
+CONFIG_SCSI_AIC7XXX_OLD=m
+CONFIG_SCSI_AIC79XX=m
+CONFIG_AIC79XX_CMDS_PER_DEVICE=4
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_DEBUG_ENABLE is not set
+CONFIG_AIC79XX_DEBUG_MASK=0
+# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+CONFIG_SCSI_ARCMSR=m
+CONFIG_MEGARAID_NEWGEN=y
+CONFIG_MEGARAID_MM=m
+CONFIG_MEGARAID_MAILBOX=m
+# CONFIG_MEGARAID_LEGACY is not set
+CONFIG_MEGARAID_SAS=m
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+CONFIG_SCSI_FUTURE_DOMAIN=m
+CONFIG_SCSI_GDTH=m
+CONFIG_SCSI_IPS=m
+CONFIG_SCSI_INITIO=m
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+CONFIG_SCSI_SYM53C8XX_2=m
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_QLOGIC_1280=m
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+CONFIG_VITESSE_PHY=y
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_ATM_DRIVERS is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+CONFIG_NETCONSOLE=m
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_ISDN=m
+CONFIG_ISDN_I4L=m
+CONFIG_ISDN_PPP=y
+CONFIG_ISDN_PPP_VJ=y
+CONFIG_ISDN_MPP=y
+CONFIG_IPPP_FILTER=y
+# CONFIG_ISDN_PPP_BSDCOMP is not set
+CONFIG_ISDN_AUDIO=y
+CONFIG_ISDN_TTY_FAX=y
+
+#
+# ISDN feature submodules
+#
+CONFIG_ISDN_DRV_LOOP=m
+# CONFIG_ISDN_DIVERSION is not set
+
+#
+# ISDN4Linux hardware drivers
+#
+
+#
+# Passive cards
+#
+CONFIG_ISDN_DRV_HISAX=m
+
+#
+# D-channel protocol features
+#
+CONFIG_HISAX_EURO=y
+CONFIG_DE_AOC=y
+CONFIG_HISAX_NO_SENDCOMPLETE=y
+CONFIG_HISAX_NO_LLC=y
+CONFIG_HISAX_NO_KEYPAD=y
+CONFIG_HISAX_1TR6=y
+CONFIG_HISAX_NI1=y
+CONFIG_HISAX_MAX_CARDS=8
+
+#
+# HiSax supported cards
+#
+CONFIG_HISAX_16_3=y
+CONFIG_HISAX_S0BOX=y
+CONFIG_HISAX_FRITZPCI=y
+CONFIG_HISAX_AVM_A1_PCMCIA=y
+CONFIG_HISAX_ELSA=y
+CONFIG_HISAX_DIEHLDIVA=y
+CONFIG_HISAX_SEDLBAUER=y
+CONFIG_HISAX_NICCY=y
+CONFIG_HISAX_BKM_A4T=y
+CONFIG_HISAX_SCT_QUADRO=y
+CONFIG_HISAX_GAZEL=y
+CONFIG_HISAX_W6692=y
+CONFIG_HISAX_HFC_SX=y
+# CONFIG_HISAX_DEBUG is not set
+
+#
+# HiSax PCMCIA card service modules
+#
+
+#
+# HiSax sub driver modules
+#
+CONFIG_HISAX_ST5481=m
+CONFIG_HISAX_HFCUSB=m
+# CONFIG_HISAX_HFC4S8S is not set
+CONFIG_HISAX_FRITZ_PCIPNP=m
+CONFIG_HISAX_HDLC=y
+
+#
+# Active cards
+#
+CONFIG_HYSDN=m
+CONFIG_HYSDN_CAPI=y
+# CONFIG_ISDN_DRV_GIGASET is not set
+CONFIG_ISDN_CAPI=m
+CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
+CONFIG_CAPI_TRACE=y
+CONFIG_ISDN_CAPI_MIDDLEWARE=y
+CONFIG_ISDN_CAPI_CAPI20=m
+CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
+CONFIG_ISDN_CAPI_CAPIFS=m
+CONFIG_ISDN_CAPI_CAPIDRV=m
+
+#
+# CAPI hardware drivers
+#
+CONFIG_CAPI_AVM=y
+CONFIG_ISDN_DRV_AVMB1_B1PCI=m
+CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
+CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
+CONFIG_ISDN_DRV_AVMB1_T1PCI=m
+CONFIG_ISDN_DRV_AVMB1_C4=m
+CONFIG_CAPI_EICON=y
+CONFIG_ISDN_DIVAS=m
+CONFIG_ISDN_DIVAS_BRIPCI=y
+CONFIG_ISDN_DIVAS_PRIPCI=y
+CONFIG_ISDN_DIVAS_DIVACAPI=m
+CONFIG_ISDN_DIVAS_USERIDI=m
+CONFIG_ISDN_DIVAS_MAINT=m
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+# CONFIG_ROCKETPORT is not set
+# CONFIG_CYCLADES is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+# CONFIG_SYNCLINK is not set
+# CONFIG_SYNCLINKMP is not set
+# CONFIG_SYNCLINK_GT is not set
+# CONFIG_N_HDLC is not set
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_MPSC=y
+CONFIG_SERIAL_MPSC_CONSOLE=y
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+CONFIG_NVRAM=m
+CONFIG_GEN_RTC=m
+# CONFIG_GEN_RTC_X is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=8192
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_MPC is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_MV64XXX=m
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+# CONFIG_PCF8575 is not set
+CONFIG_SENSORS_PCF8591=m
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_AD7418 is not set
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+# CONFIG_SENSORS_ADM1029 is not set
+CONFIG_SENSORS_ADM1031=m
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+CONFIG_SENSORS_DS1621=m
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+CONFIG_SENSORS_GL518SM=m
+# CONFIG_SENSORS_GL520SM is not set
+CONFIG_SENSORS_IT87=m
+# CONFIG_SENSORS_LM63 is not set
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+CONFIG_SENSORS_MAX1619=m
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+CONFIG_SENSORS_SMSC47M1=m
+# CONFIG_SENSORS_SMSC47M192 is not set
+CONFIG_SENSORS_SMSC47B397=m
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+CONFIG_SENSORS_VIA686A=m
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+CONFIG_SENSORS_W83781D=m
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+CONFIG_SENSORS_W83L785TS=m
+# CONFIG_SENSORS_W83L786NG is not set
+CONFIG_SENSORS_W83627HF=m
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_MV64X60_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+CONFIG_PCIPCWATCHDOG=m
+CONFIG_WDTPCI=m
+CONFIG_WDT_501_PCI=y
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_HID=m
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DPCM=y
+# CONFIG_USB_STORAGE_USBAT is not set
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_AIRPRIME is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+CONFIG_USB_SERIAL_BELKIN=m
+# CONFIG_USB_SERIAL_CH341 is not set
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_TI is not set
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+# CONFIG_USB_SERIAL_OPTION is not set
+CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+CONFIG_USB_AUERSWALD=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+# CONFIG_USB_BERRY_CHARGE is not set
+CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+# CONFIG_USB_CXACRU is not set
+# CONFIG_USB_UEAGLEATM is not set
+# CONFIG_USB_XUSBATM is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_INFINIBAND=m
+CONFIG_INFINIBAND_USER_MAD=m
+CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_USER_MEM=y
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_AMSO1100=m
+# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
+# CONFIG_MLX4_INFINIBAND is not set
+# CONFIG_INFINIBAND_NES is not set
+CONFIG_INFINIBAND_IPOIB=m
+CONFIG_INFINIBAND_IPOIB_CM=y
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+CONFIG_INFINIBAND_SRP=m
+# CONFIG_INFINIBAND_ISER is not set
+# CONFIG_EDAC is not set
+# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_FSL_DMA is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=m
+CONFIG_FS_MBCACHE=m
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_CHECK_SIGNATURE=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_HIGHMEM=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+# CONFIG_SECURITY_NETWORK_XFRM is not set
+CONFIG_SECURITY_CAPABILITIES=y
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8536_ds_defconfig b/arch/powerpc/configs/mpc8536_ds_defconfig
new file mode 100644
index 000000000000..f1e2931de5da
--- /dev/null
+++ b/arch/powerpc/configs/mpc8536_ds_defconfig
@@ -0,0 +1,1637 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc8
+# Wed Jul  2 01:34:26 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_MDS is not set
+CONFIG_MPC8536_DS=y
+# CONFIG_MPC85xx_DS is not set
+# CONFIG_KSI8560 is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=m
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_NET_IPGRE=y
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_ARPD=y
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=524288
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+CONFIG_SCSI_LOGGING=y
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_SATA_FSL=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+CONFIG_VITESSE_PHY=y
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+CONFIG_SKGE=y
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKY2=y
+# CONFIG_SKY2_DEBUG is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_SENSORS_EEPROM=y
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+# CONFIG_TTPCI_EEPROM is not set
+# CONFIG_DVB_BUDGET_CORE is not set
+
+#
+# Supported USB Adapters
+#
+# CONFIG_DVB_USB is not set
+# CONFIG_DVB_TTUSB_BUDGET is not set
+# CONFIG_DVB_TTUSB_DEC is not set
+# CONFIG_DVB_CINERGYT2 is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported BT878 Adapters
+#
+
+#
+# Supported Pluto2 Adapters
+#
+# CONFIG_DVB_PLUTO2 is not set
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+# CONFIG_DVB_CX24110 is not set
+# CONFIG_DVB_CX24123 is not set
+# CONFIG_DVB_MT312 is not set
+# CONFIG_DVB_S5H1420 is not set
+# CONFIG_DVB_STV0299 is not set
+# CONFIG_DVB_TDA8083 is not set
+# CONFIG_DVB_TDA10086 is not set
+# CONFIG_DVB_VES1X93 is not set
+# CONFIG_DVB_TUNER_ITD1000 is not set
+# CONFIG_DVB_TDA826X is not set
+# CONFIG_DVB_TUA6100 is not set
+
+#
+# DVB-T (terrestrial) frontends
+#
+# CONFIG_DVB_SP8870 is not set
+# CONFIG_DVB_SP887X is not set
+# CONFIG_DVB_CX22700 is not set
+# CONFIG_DVB_CX22702 is not set
+# CONFIG_DVB_L64781 is not set
+# CONFIG_DVB_TDA1004X is not set
+# CONFIG_DVB_NXT6000 is not set
+# CONFIG_DVB_MT352 is not set
+# CONFIG_DVB_ZL10353 is not set
+# CONFIG_DVB_DIB3000MB is not set
+# CONFIG_DVB_DIB3000MC is not set
+# CONFIG_DVB_DIB7000M is not set
+# CONFIG_DVB_DIB7000P is not set
+# CONFIG_DVB_TDA10048 is not set
+
+#
+# DVB-C (cable) frontends
+#
+# CONFIG_DVB_VES1820 is not set
+# CONFIG_DVB_TDA10021 is not set
+# CONFIG_DVB_TDA10023 is not set
+# CONFIG_DVB_STV0297 is not set
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+# CONFIG_DVB_NXT200X is not set
+# CONFIG_DVB_OR51211 is not set
+# CONFIG_DVB_OR51132 is not set
+# CONFIG_DVB_BCM3510 is not set
+# CONFIG_DVB_LGDT330X is not set
+# CONFIG_DVB_S5H1409 is not set
+# CONFIG_DVB_AU8522 is not set
+# CONFIG_DVB_S5H1411 is not set
+
+#
+# Digital terrestrial only tuners/PLL
+#
+# CONFIG_DVB_PLL is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
+
+#
+# SEC control devices for DVB-S
+#
+# CONFIG_DVB_LNBP21 is not set
+# CONFIG_DVB_ISL6405 is not set
+# CONFIG_DVB_ISL6421 is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_VGACON_SOFT_SCROLLBACK is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+CONFIG_SND_AC97_CODEC=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+CONFIG_SND_INTEL8X0=y
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+
+#
+# ALSA PowerMac devices
+#
+
+#
+# ALSA PowerPC devices
+#
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
+
+#
+# System on Chip audio support
+#
+# CONFIG_SND_SOC is not set
+
+#
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
+#
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_FSL_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+CONFIG_ADFS_FS=m
+# CONFIG_ADFS_FS_RW is not set
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=y
+CONFIG_VXFS_FS=m
+# CONFIG_MINIX_FS is not set
+CONFIG_HPFS_FS=m
+CONFIG_QNX4FS_FS=m
+# CONFIG_ROMFS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFSD=y
+# CONFIG_NFSD_V3 is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+CONFIG_CRYPTO_SHA1=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index 3efab71a603b..fa0170504b88 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1005,10 +1005,12 @@ CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig
index 5612d40d0463..cdf98ae3682b 100644
--- a/arch/powerpc/configs/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Mon Jun  9 08:50:24 2008
+# Linux kernel version: 2.6.26
+# Tue Jul 15 08:31:01 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -51,6 +51,8 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -97,6 +99,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
+CONFIG_PCSPKR_PLATFORM=y
 CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
@@ -117,7 +120,7 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_HAVE_DMA_ATTRS=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -153,31 +156,43 @@ CONFIG_CLASSIC_RCU=y
 #
 # Platform support
 #
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-CONFIG_PPC_86xx=y
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
 # CONFIG_PPC_MPC512x is not set
 # CONFIG_PPC_MPC5121 is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_PPC_MPC52xx is not set
+CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
 # CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+CONFIG_PPC_86xx=y
 # CONFIG_MPC8641_HPCN is not set
 # CONFIG_SBC8641D is not set
 CONFIG_MPC8610_HPCD=y
 CONFIG_MPC8610=y
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_IPIC is not set
 CONFIG_MPIC=y
 # CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
 # CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_PPC_INDIRECT_IO is not set
 # CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
-# CONFIG_FSL_ULI1575 is not set
+# CONFIG_PPC601_SYNC_FIX is not set
+# CONFIG_TAU is not set
+CONFIG_FSL_ULI1575=y
 
 #
 # Kernel options
@@ -202,6 +217,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -228,11 +244,13 @@ CONFIG_ISA_DMA_API=y
 #
 # Bus options
 #
+# CONFIG_ISA is not set
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
@@ -469,6 +487,7 @@ CONFIG_OF_I2C=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
+# CONFIG_MAC_FLOPPY is not set
 # CONFIG_BLK_CPQ_DA is not set
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
@@ -571,6 +590,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_MESH is not set
+# CONFIG_SCSI_MAC53C94 is not set
 # CONFIG_SCSI_SRP is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
@@ -639,6 +660,10 @@ CONFIG_PATA_ALI=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -655,6 +680,8 @@ CONFIG_DUMMY=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_MACE is not set
+# CONFIG_BMAC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
@@ -762,14 +789,16 @@ CONFIG_SERIAL_8250_RSA=y
 # CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_PMACZILOG is not set
 # CONFIG_SERIAL_JSM is not set
 # CONFIG_SERIAL_OF_PLATFORM is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
+# CONFIG_BRIQ_PANEL is not set
+# CONFIG_HVC_RTAS is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -787,9 +816,11 @@ CONFIG_I2C_BOARDINFO=y
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_HYDRA is not set
 # CONFIG_I2C_I801 is not set
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_POWERMAC=y
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
 # CONFIG_I2C_OCORES is not set
@@ -826,6 +857,7 @@ CONFIG_I2C_MPC=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -888,6 +920,9 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 # CONFIG_FB_OF is not set
+# CONFIG_FB_CONTROL is not set
+# CONFIG_FB_PLATINUM is not set
+# CONFIG_FB_VALKYRIE is not set
 # CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
@@ -1027,12 +1062,19 @@ CONFIG_SND_VERBOSE_PROCFS=y
 #
 # ALSA PowerMac devices
 #
+# CONFIG_SND_POWERMAC is not set
 
 #
 # ALSA PowerPC devices
 #
 
 #
+# Apple Onboard Audio driver
+#
+# CONFIG_SND_AOA is not set
+# CONFIG_SND_AOA_SOUNDBUS is not set
+
+#
 # System on Chip audio support
 #
 CONFIG_SND_SOC=y
@@ -1075,7 +1117,57 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
@@ -1295,8 +1387,11 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
index 4a8171507391..867b8c0215f3 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -991,10 +991,12 @@ CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index 12f9b5a80220..f9d279bb700b 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Sat Apr  5 09:35:48 2008
+# Linux kernel version: 2.6.26-rc8
+# Wed Jul  9 13:50:48 2008
 #
 # CONFIG_PPC64 is not set
 
@@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
@@ -88,6 +90,7 @@ CONFIG_INITRAMFS_SOURCE=""
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -115,12 +118,14 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -157,6 +162,7 @@ CONFIG_PPC4xx_PCI_EXPRESS=y
 # CONFIG_PQ2ADS is not set
 CONFIG_BAMBOO=y
 CONFIG_EBONY=y
+CONFIG_SAM440EP=y
 CONFIG_SEQUOIA=y
 CONFIG_TAISHAN=y
 CONFIG_KATMAI=y
@@ -164,6 +170,7 @@ CONFIG_RAINIER=y
 CONFIG_WARP=y
 CONFIG_CANYONLANDS=y
 CONFIG_YOSEMITE=y
+CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y
 CONFIG_440EP=y
 CONFIG_440EPX=y
 CONFIG_440GRX=y
@@ -172,6 +179,8 @@ CONFIG_440GX=y
 CONFIG_440SPe=y
 CONFIG_460EX=y
 CONFIG_IBM440EP_ERR42=y
+CONFIG_XILINX_VIRTEX=y
+CONFIG_XILINX_VIRTEX_5_FXT=y
 # CONFIG_IPIC is not set
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -220,13 +229,16 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -246,6 +258,7 @@ CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -255,13 +268,13 @@ CONFIG_PCI_LEGACY=y
 #
 # Default settings for advanced configuration options are used
 #
-CONFIG_HIGHMEM_START=0xfe000000
 CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
 CONFIG_CONSISTENT_START=0xff100000
 CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
 
 #
 # Networking
@@ -303,8 +316,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -366,6 +377,7 @@ CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -478,6 +490,10 @@ CONFIG_HAVE_IDE=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -528,7 +544,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
@@ -546,6 +561,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -553,6 +569,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -579,6 +596,7 @@ CONFIG_NETDEV_10000=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -611,22 +629,19 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
+CONFIG_XILINX_HWICAP=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -639,12 +654,22 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -671,6 +696,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -679,14 +706,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -701,7 +725,6 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -770,7 +793,6 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 # CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
@@ -798,6 +820,7 @@ CONFIG_MSDOS_PARTITION=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_ITU_T is not set
@@ -818,6 +841,7 @@ CONFIG_HAVE_LMB=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -828,6 +852,7 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
@@ -840,6 +865,7 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
@@ -851,6 +877,9 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -861,50 +890,80 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 # CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
new file mode 100644
index 000000000000..e6e91c85da31
--- /dev/null
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -0,0 +1,3304 @@
+# powerpc
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-git2
+# Tue Jul 15 23:54:18 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+CONFIG_FSL_EMB_PERFMON=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_DEFAULT_UIMAGE=y
+CONFIG_REDBOOT=y
+CONFIG_HIBERNATE_32=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_AUDIT_TREE=y
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+# CONFIG_USER_SCHED is not set
+CONFIG_CGROUP_SCHED=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+# CONFIG_CGROUP_MEM_RES_CTLR is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_MARKERS=y
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+CONFIG_LBD=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_LSF=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_INTEGRITY=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+CONFIG_PPC_CHRP=y
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+CONFIG_PPC_MPC52xx=y
+# CONFIG_PPC_MPC5200_SIMPLE is not set
+CONFIG_PPC_EFIKA=y
+# CONFIG_PPC_LITE5200 is not set
+CONFIG_PPC_MPC5200_BUGFIX=y
+CONFIG_PPC_MPC5200_GPIO=y
+CONFIG_PPC_PMAC=y
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_82xx=y
+CONFIG_MPC8272_ADS=y
+CONFIG_PQ2FADS=y
+CONFIG_EP8248E=y
+CONFIG_PQ2ADS=y
+CONFIG_8260=y
+CONFIG_8272=y
+CONFIG_PQ2_ADS_PCI_PIC=y
+CONFIG_PPC_83xx=y
+CONFIG_MPC831x_RDB=y
+CONFIG_MPC832x_MDS=y
+CONFIG_MPC832x_RDB=y
+CONFIG_MPC834x_MDS=y
+CONFIG_MPC834x_ITX=y
+CONFIG_MPC836x_MDS=y
+CONFIG_MPC836x_RDK=y
+CONFIG_MPC837x_MDS=y
+CONFIG_MPC837x_RDB=y
+CONFIG_SBC834x=y
+CONFIG_ASP834x=y
+CONFIG_PPC_MPC831x=y
+CONFIG_PPC_MPC832x=y
+CONFIG_PPC_MPC834x=y
+CONFIG_PPC_MPC837x=y
+CONFIG_PPC_86xx=y
+CONFIG_MPC8641_HPCN=y
+CONFIG_SBC8641D=y
+CONFIG_MPC8610_HPCD=y
+CONFIG_MPC8641=y
+CONFIG_MPC8610=y
+# CONFIG_EMBEDDED6xx is not set
+CONFIG_PPC_NATIVE=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
+CONFIG_IPIC=y
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+CONFIG_PPC_I8259=y
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+# CONFIG_MMIO_NVRAM is not set
+CONFIG_PPC_MPC106=y
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+
+#
+# CPU Frequency drivers
+#
+CONFIG_CPU_FREQ_PMAC=y
+# CONFIG_PPC601_SYNC_FIX is not set
+CONFIG_TAU=y
+# CONFIG_TAU_INT is not set
+CONFIG_TAU_AVERAGE=y
+CONFIG_QUICC_ENGINE=y
+CONFIG_CPM2=y
+CONFIG_PPC_CPM_NEW_BINDING=y
+CONFIG_FSL_ULI1575=y
+CONFIG_CPM=y
+CONFIG_PPC_BESTCOMM=y
+CONFIG_PPC_BESTCOMM_ATA=m
+CONFIG_PPC_BESTCOMM_FEC=m
+CONFIG_PPC_BESTCOMM_GEN_BD=m
+
+#
+# Kernel options
+#
+CONFIG_HIGHMEM=y
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_MATH_EMULATION is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_HIBERNATION=y
+CONFIG_PM_STD_PARTITION=""
+CONFIG_APM_EMULATION=y
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ISA=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
+CONFIG_FSL_GTM=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+CONFIG_PCI_8260=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEASPM=y
+# CONFIG_PCIEASPM_DEBUG is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+CONFIG_YENTA_O2=y
+CONFIG_YENTA_RICOH=y
+CONFIG_YENTA_TI=y
+CONFIG_YENTA_ENE_TUNE=y
+CONFIG_YENTA_TOSHIBA=y
+CONFIG_PD6729=m
+CONFIG_I82092=m
+CONFIG_I82365=m
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_PROBE=y
+CONFIG_PCCARD_NONSTATIC=y
+# CONFIG_HOTPLUG_PCI is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+CONFIG_ADVANCED_OPTIONS=y
+# CONFIG_LOWMEM_SIZE_BOOL is not set
+CONFIG_LOWMEM_SIZE=0x30000000
+# CONFIG_PAGE_OFFSET_BOOL is not set
+CONFIG_PAGE_OFFSET=0xc0000000
+# CONFIG_KERNEL_START_BOOL is not set
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+# CONFIG_TASK_SIZE_BOOL is not set
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_XFRM_MIGRATE=y
+CONFIG_XFRM_STATISTICS=y
+CONFIG_NET_KEY=m
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+# CONFIG_IP_PNP is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_IPGRE_BROADCAST=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+CONFIG_TCP_MD5SIG=y
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETLABEL=y
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+
+#
+# DECnet: Netfilter Configuration
+#
+# CONFIG_DECNET_NF_GRABULATOR is not set
+
+#
+# Bridge: Netfilter Configuration
+#
+CONFIG_BRIDGE_NF_EBTABLES=m
+CONFIG_BRIDGE_EBT_BROUTE=m
+CONFIG_BRIDGE_EBT_T_FILTER=m
+CONFIG_BRIDGE_EBT_T_NAT=m
+CONFIG_BRIDGE_EBT_802_3=m
+CONFIG_BRIDGE_EBT_AMONG=m
+CONFIG_BRIDGE_EBT_ARP=m
+CONFIG_BRIDGE_EBT_IP=m
+CONFIG_BRIDGE_EBT_LIMIT=m
+CONFIG_BRIDGE_EBT_MARK=m
+CONFIG_BRIDGE_EBT_PKTTYPE=m
+CONFIG_BRIDGE_EBT_STP=m
+CONFIG_BRIDGE_EBT_VLAN=m
+CONFIG_BRIDGE_EBT_ARPREPLY=m
+CONFIG_BRIDGE_EBT_DNAT=m
+CONFIG_BRIDGE_EBT_MARK_T=m
+CONFIG_BRIDGE_EBT_REDIRECT=m
+CONFIG_BRIDGE_EBT_SNAT=m
+CONFIG_BRIDGE_EBT_LOG=m
+CONFIG_BRIDGE_EBT_ULOG=m
+CONFIG_BRIDGE_EBT_NFLOG=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_NET_DCCPPROBE=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+# CONFIG_ATM_MPOA is not set
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_DECNET=m
+CONFIG_DECNET_ROUTER=y
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+CONFIG_IPX=m
+# CONFIG_IPX_INTERN is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+# CONFIG_LTPC is not set
+# CONFIG_COPS is not set
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+CONFIG_IRDA_CACHE_LAST_LSAP=y
+CONFIG_IRDA_FAST_RR=y
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+CONFIG_IRTTY_SIR=m
+
+#
+# Dongle support
+#
+# CONFIG_DONGLE is not set
+CONFIG_KINGSUN_DONGLE=m
+CONFIG_KSDAZZLE_DONGLE=m
+CONFIG_KS959_DONGLE=m
+
+#
+# FIR device drivers
+#
+CONFIG_USB_IRDA=m
+CONFIG_SIGMATEL_FIR=m
+CONFIG_NSC_FIR=m
+CONFIG_WINBOND_FIR=m
+CONFIG_TOSHIBA_FIR=m
+CONFIG_SMC_IRCC_FIR=m
+CONFIG_ALI_FIR=m
+CONFIG_VLSI_FIR=m
+CONFIG_VIA_FIR=m
+CONFIG_MCS_FIR=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIUSB=m
+CONFIG_BT_HCIUSB_SCO=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIDTL1=m
+CONFIG_BT_HCIBT3C=m
+CONFIG_BT_HCIBLUECARD=m
+CONFIG_BT_HCIBTUART=m
+CONFIG_BT_HCIVHCI=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_FIB_RULES=y
+
+#
+# Wireless
+#
+CONFIG_CFG80211=m
+CONFIG_NL80211=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_MAC80211=m
+CONFIG_MAC80211_QOS=y
+
+#
+# Rate control algorithm selection
+#
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+CONFIG_MAC80211_DEBUGFS=y
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_IEEE80211=m
+CONFIG_IEEE80211_DEBUG=y
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+CONFIG_NET_9P=m
+CONFIG_NET_9P_VIRTIO=m
+# CONFIG_NET_9P_DEBUG is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+CONFIG_DEBUG_DEVRES=y
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+CONFIG_PARPORT=m
+CONFIG_PARPORT_PC=m
+CONFIG_PARPORT_SERIAL=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+# CONFIG_PARPORT_PC_PCMCIA is not set
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+CONFIG_PNP=y
+# CONFIG_PNP_DEBUG is not set
+
+#
+# Protocols
+#
+CONFIG_ISAPNP=y
+# CONFIG_PNPACPI is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+CONFIG_MAC_FLOPPY=m
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_VIRTIO_BLK=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+CONFIG_EEPROM_93CX6=m
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDEDISK_MULTI_MODE=y
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+CONFIG_BLK_DEV_IDECD=m
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+CONFIG_IDE_TASK_IOCTL=y
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
+# CONFIG_BLK_DEV_IDEPNP is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
+CONFIG_BLK_DEV_IDEDMA_PMAC=y
+CONFIG_BLK_DEV_IDEDMA=y
+CONFIG_BLK_DEV_HD_ONLY=y
+CONFIG_BLK_DEV_HD=y
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_ENCLOSURE=m
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_7000FASST is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AHA1542 is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_U14_34F is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_SCSI_MESH=m
+CONFIG_SCSI_MESH_SYNC_RATE=5
+CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
+CONFIG_SCSI_MAC53C94=m
+CONFIG_SCSI_SRP=m
+CONFIG_SCSI_LOWLEVEL_PCMCIA=y
+# CONFIG_PCMCIA_AHA152X is not set
+# CONFIG_PCMCIA_FDOMAIN is not set
+# CONFIG_PCMCIA_NINJA_SCSI is not set
+# CONFIG_PCMCIA_QLOGIC is not set
+# CONFIG_PCMCIA_SYM53C500 is not set
+CONFIG_SCSI_DH=y
+CONFIG_SCSI_DH_RDAC=m
+CONFIG_SCSI_DH_HP_SW=m
+CONFIG_SCSI_DH_EMC=m
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_SATA_FSL=m
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+CONFIG_ATA_PIIX=m
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+CONFIG_PDC_ADMA=m
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+CONFIG_ATA_GENERIC=m
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_ISAPNP is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_LEGACY is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+CONFIG_PATA_MPC52xx=m
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+CONFIG_PATA_OPTIDMA=m
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+CONFIG_PATA_VIA=m
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+CONFIG_PATA_PLATFORM=m
+CONFIG_PATA_OF_PLATFORM=m
+CONFIG_PATA_SCH=m
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_DEBUG=y
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+CONFIG_FIREWIRE=m
+CONFIG_FIREWIRE_OHCI=m
+CONFIG_FIREWIRE_OHCI_DEBUG=y
+CONFIG_FIREWIRE_SBP2=m
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_CUDA=y
+CONFIG_ADB_PMU=y
+CONFIG_ADB_PMU_LED=y
+CONFIG_ADB_PMU_LED_IDE=y
+CONFIG_PMAC_APM_EMU=y
+CONFIG_PMAC_MEDIABAY=y
+CONFIG_PMAC_BACKLIGHT=y
+# CONFIG_PMAC_BACKLIGHT_LEGACY is not set
+CONFIG_ADB_MACIO=y
+CONFIG_INPUT_ADBHID=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_THERM_WINDTUNNEL=m
+CONFIG_THERM_ADT746X=m
+CONFIG_WINDFARM=y
+# CONFIG_ANSLCD is not set
+CONFIG_PMAC_RACKMETER=m
+CONFIG_NETDEVICES=y
+CONFIG_NETDEVICES_MULTIQUEUE=y
+CONFIG_IFB=m
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_NET_SB1000=m
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=m
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_VITESSE_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_BROADCOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_MACE=m
+# CONFIG_MACE_AAUI_PORT is not set
+CONFIG_BMAC=m
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNGEM=m
+CONFIG_CASSINI=m
+CONFIG_NET_VENDOR_3COM=y
+# CONFIG_EL1 is not set
+# CONFIG_EL2 is not set
+# CONFIG_ELPLUS is not set
+# CONFIG_EL16 is not set
+CONFIG_EL3=m
+# CONFIG_3C515 is not set
+CONFIG_VORTEX=m
+CONFIG_TYPHOON=m
+# CONFIG_LANCE is not set
+CONFIG_NET_VENDOR_SMC=y
+# CONFIG_WD80x3 is not set
+CONFIG_ULTRA=m
+# CONFIG_SMC9194 is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+CONFIG_NET_TULIP=y
+CONFIG_DE2104X=m
+CONFIG_TULIP=m
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+CONFIG_DE4X5=m
+CONFIG_WINBOND_840=m
+CONFIG_DM9102=m
+CONFIG_ULI526X=m
+CONFIG_PCMCIA_XIRCOM=m
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_ISA=y
+# CONFIG_E2100 is not set
+CONFIG_EWRK3=m
+# CONFIG_EEXPRESS is not set
+# CONFIG_EEXPRESS_PRO is not set
+# CONFIG_HPLAN_PLUS is not set
+# CONFIG_HPLAN is not set
+# CONFIG_LP486E is not set
+# CONFIG_ETH16I is not set
+CONFIG_NE2000=m
+# CONFIG_ZNET is not set
+# CONFIG_SEEQ8005 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=m
+CONFIG_AMD8111_ETH=m
+CONFIG_AMD8111E_NAPI=y
+CONFIG_ADAPTEC_STARFIRE=m
+CONFIG_ADAPTEC_STARFIRE_NAPI=y
+# CONFIG_AC3200 is not set
+# CONFIG_APRICOT is not set
+CONFIG_B44=m
+CONFIG_B44_PCI_AUTOSELECT=y
+CONFIG_B44_PCICORE_AUTOSELECT=y
+CONFIG_B44_PCI=y
+CONFIG_FORCEDETH=m
+CONFIG_FORCEDETH_NAPI=y
+# CONFIG_CS89x0 is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=m
+CONFIG_FEALNX=m
+CONFIG_NATSEMI=m
+CONFIG_NE2K_PCI=m
+CONFIG_8139CP=m
+CONFIG_8139TOO=m
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_8139TOO_TUNE_TWISTER is not set
+CONFIG_8139TOO_8129=y
+# CONFIG_8139_OLD_RX_RESET is not set
+CONFIG_R6040=m
+CONFIG_SIS900=m
+CONFIG_EPIC100=m
+CONFIG_SUNDANCE=m
+# CONFIG_SUNDANCE_MMIO is not set
+CONFIG_TLAN=m
+CONFIG_VIA_RHINE=m
+CONFIG_VIA_RHINE_MMIO=y
+CONFIG_VIA_RHINE_NAPI=y
+CONFIG_SC92031=m
+CONFIG_NET_POCKET=y
+CONFIG_DE600=m
+CONFIG_DE620=m
+CONFIG_FEC_MPC52xx=m
+CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_FS_ENET is not set
+CONFIG_NETDEV_1000=y
+CONFIG_ACENIC=m
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+CONFIG_DL2K=m
+CONFIG_E1000=m
+CONFIG_E1000_NAPI=y
+# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
+CONFIG_E1000E=m
+CONFIG_E1000E_ENABLED=y
+CONFIG_IP1000=m
+CONFIG_IGB=m
+CONFIG_NS83820=m
+CONFIG_HAMACHI=m
+CONFIG_YELLOWFIN=m
+CONFIG_R8169=m
+CONFIG_R8169_NAPI=y
+CONFIG_R8169_VLAN=y
+CONFIG_SIS190=m
+CONFIG_SKGE=m
+# CONFIG_SKGE_DEBUG is not set
+CONFIG_SKY2=m
+# CONFIG_SKY2_DEBUG is not set
+CONFIG_VIA_VELOCITY=m
+CONFIG_TIGON3=m
+CONFIG_BNX2=m
+CONFIG_GIANFAR=m
+CONFIG_GFAR_NAPI=y
+# CONFIG_UCC_GETH is not set
+CONFIG_MV643XX_ETH=m
+CONFIG_QLA3XXX=m
+CONFIG_ATL1=m
+CONFIG_NETDEV_10000=y
+CONFIG_CHELSIO_T1=m
+CONFIG_CHELSIO_T1_1G=y
+CONFIG_CHELSIO_T1_NAPI=y
+CONFIG_CHELSIO_T3=m
+CONFIG_IXGBE=m
+CONFIG_IXGB=m
+CONFIG_IXGB_NAPI=y
+CONFIG_S2IO=m
+CONFIG_S2IO_NAPI=y
+CONFIG_MYRI10GE=m
+CONFIG_NETXEN_NIC=m
+CONFIG_NIU=m
+# CONFIG_MLX4_CORE is not set
+CONFIG_TEHUTI=m
+CONFIG_BNX2X=m
+CONFIG_SFC=m
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=m
+CONFIG_NET_PCMCIA=y
+CONFIG_PCMCIA_3C589=m
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_FMVJ18X=m
+CONFIG_PCMCIA_PCNET=m
+CONFIG_PCMCIA_NMCLAN=m
+CONFIG_PCMCIA_SMC91C92=m
+CONFIG_PCMCIA_XIRC2PS=m
+CONFIG_PCMCIA_AXNET=m
+# CONFIG_WAN is not set
+CONFIG_ATM_DRIVERS=y
+# CONFIG_ATM_DUMMY is not set
+CONFIG_ATM_TCP=m
+CONFIG_ATM_LANAI=m
+CONFIG_ATM_ENI=m
+# CONFIG_ATM_ENI_DEBUG is not set
+# CONFIG_ATM_ENI_TUNE_BURST is not set
+# CONFIG_ATM_FIRESTREAM is not set
+# CONFIG_ATM_ZATM is not set
+CONFIG_ATM_NICSTAR=m
+# CONFIG_ATM_NICSTAR_USE_SUNI is not set
+# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
+CONFIG_ATM_IDT77252=m
+# CONFIG_ATM_IDT77252_DEBUG is not set
+# CONFIG_ATM_IDT77252_RCV_ALL is not set
+CONFIG_ATM_IDT77252_USE_SUNI=y
+# CONFIG_ATM_AMBASSADOR is not set
+# CONFIG_ATM_HORIZON is not set
+# CONFIG_ATM_IA is not set
+CONFIG_ATM_FORE200E_MAYBE=m
+# CONFIG_ATM_FORE200E_PCA is not set
+CONFIG_ATM_HE=m
+# CONFIG_ATM_HE_USE_SUNI is not set
+CONFIG_FDDI=y
+# CONFIG_DEFXX is not set
+CONFIG_SKFP=m
+# CONFIG_HIPPI is not set
+CONFIG_PLIP=m
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOATM=m
+CONFIG_PPPOL2TP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+# CONFIG_SLIP_MODE_SLIP6 is not set
+CONFIG_NET_FC=y
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+CONFIG_VIRTIO_NET=m
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=m
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=m
+CONFIG_MOUSE_APPLETOUCH=m
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_VSXXXAA=m
+# CONFIG_MOUSE_GPIO is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+CONFIG_JOYSTICK_IFORCE_USB=y
+CONFIG_JOYSTICK_IFORCE_232=y
+CONFIG_JOYSTICK_WARRIOR=m
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
+CONFIG_INPUT_TABLET=y
+CONFIG_TABLET_USB_ACECAD=m
+CONFIG_TABLET_USB_AIPTEK=m
+CONFIG_TABLET_USB_GTCO=m
+CONFIG_TABLET_USB_KBTAB=m
+CONFIG_TABLET_USB_WACOM=m
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PCSPKR=m
+CONFIG_INPUT_ATI_REMOTE=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_UINPUT=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PARKBD is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=m
+CONFIG_GAMEPORT=m
+CONFIG_GAMEPORT_NS558=m
+CONFIG_GAMEPORT_L4=m
+CONFIG_GAMEPORT_EMU10K1=m
+CONFIG_GAMEPORT_FM801=m
+CONFIG_INPUT_LIRC=y
+CONFIG_LIRC_DEV=m
+CONFIG_LIRC_ATIUSB=m
+CONFIG_LIRC_BT829=m
+CONFIG_LIRC_CMDIR=m
+CONFIG_LIRC_I2C=m
+CONFIG_LIRC_IGORPLUGUSB=m
+CONFIG_LIRC_IMON=m
+CONFIG_LIRC_IT87=m
+CONFIG_LIRC_MCEUSB=m
+CONFIG_LIRC_MCEUSB2=m
+CONFIG_LIRC_PVR150=m
+CONFIG_LIRC_PARALLEL=m
+CONFIG_LIRC_SERIAL=m
+CONFIG_LIRC_SIR=m
+CONFIG_LIRC_STREAMZAP=m
+CONFIG_LIRC_TTUSBIR=m
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_COMPUTONE is not set
+CONFIG_ROCKETPORT=m
+CONFIG_CYCLADES=m
+# CONFIG_CYZ_INTR is not set
+# CONFIG_DIGIEPCA is not set
+# CONFIG_ESPSERIAL is not set
+# CONFIG_MOXA_INTELLIO is not set
+# CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
+CONFIG_SYNCLINK=m
+CONFIG_SYNCLINKMP=m
+CONFIG_SYNCLINK_GT=m
+CONFIG_N_HDLC=m
+# CONFIG_RISCOM8 is not set
+# CONFIG_SPECIALIX is not set
+# CONFIG_SX is not set
+# CONFIG_RIO is not set
+# CONFIG_STALDRV is not set
+CONFIG_NOZOMI=m
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_CS=m
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_UARTLITE=m
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_PMACZILOG=m
+# CONFIG_SERIAL_PMACZILOG_TTYS is not set
+# CONFIG_SERIAL_CPM is not set
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+CONFIG_SERIAL_JSM=m
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_SERIAL_QE is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_CRASH is not set
+CONFIG_BRIQ_PANEL=m
+CONFIG_PRINTER=m
+CONFIG_LP_CONSOLE=y
+CONFIG_PPDEV=m
+# CONFIG_HVC_RTAS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIRTIO=m
+CONFIG_NVRAM=y
+CONFIG_DTLK=m
+CONFIG_R3964=m
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+CONFIG_CARDMAN_4000=m
+CONFIG_CARDMAN_4040=m
+CONFIG_IPWIRELESS=m
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_ALGOPCA=m
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# Mac SMBus host controller drivers
+#
+CONFIG_I2C_HYDRA=m
+CONFIG_I2C_POWERMAC=y
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_CPM is not set
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=m
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_SIMTEC=m
+
+#
+# External I2C/SMBus adapter drivers
+#
+CONFIG_I2C_PARPORT=m
+CONFIG_I2C_PARPORT_LIGHT=m
+# CONFIG_I2C_TAOS_EVM is not set
+CONFIG_I2C_TINY_USB=m
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+CONFIG_I2C_VOODOO3=m
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+CONFIG_I2C_PCA_ISA=m
+CONFIG_I2C_PCA_PLATFORM=m
+CONFIG_I2C_STUB=m
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+CONFIG_AT24=m
+CONFIG_SENSORS_EEPROM=m
+CONFIG_SENSORS_PCF8574=m
+CONFIG_PCF8575=m
+CONFIG_SENSORS_PCA9539=m
+CONFIG_SENSORS_PCF8591=m
+# CONFIG_TPS65010 is not set
+CONFIG_SENSORS_MAX6875=m
+CONFIG_SENSORS_TSL2550=m
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_W1=m
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_MATROX is not set
+CONFIG_W1_MASTER_DS2490=m
+CONFIG_W1_MASTER_DS2482=m
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=m
+CONFIG_W1_SLAVE_SMEM=m
+CONFIG_W1_SLAVE_DS2433=m
+CONFIG_W1_SLAVE_DS2433_CRC=y
+CONFIG_W1_SLAVE_DS2760=m
+CONFIG_POWER_SUPPLY=m
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+CONFIG_APM_POWER=m
+# CONFIG_BATTERY_DS2760 is not set
+CONFIG_BATTERY_PMU=m
+CONFIG_HWMON=m
+CONFIG_HWMON_VID=m
+CONFIG_SENSORS_AD7418=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_ADT7470=m
+CONFIG_SENSORS_ADT7473=m
+CONFIG_SENSORS_AMS=m
+CONFIG_SENSORS_AMS_PMU=y
+CONFIG_SENSORS_AMS_I2C=y
+CONFIG_SENSORS_ATXP1=m
+CONFIG_SENSORS_DS1621=m
+# CONFIG_SENSORS_I5K_AMB is not set
+CONFIG_SENSORS_F71805F=m
+CONFIG_SENSORS_F71882FG=m
+CONFIG_SENSORS_F75375S=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_LM93=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_MAX6650=m
+CONFIG_SENSORS_PC87360=m
+CONFIG_SENSORS_PC87427=m
+CONFIG_SENSORS_SIS5595=m
+CONFIG_SENSORS_DME1737=m
+CONFIG_SENSORS_SMSC47M1=m
+CONFIG_SENSORS_SMSC47M192=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_ADS7828=m
+CONFIG_SENSORS_THMC50=m
+CONFIG_SENSORS_VIA686A=m
+CONFIG_SENSORS_VT1211=m
+CONFIG_SENSORS_VT8231=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_SENSORS_W83L786NG=m
+CONFIG_SENSORS_W83627HF=m
+CONFIG_SENSORS_W83627EHF=m
+# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_THERMAL=y
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_MPC5200_WDT is not set
+CONFIG_83xx_WDT=m
+CONFIG_WATCHDOG_RTAS=m
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+CONFIG_USBPCWATCHDOG=m
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
+CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
+CONFIG_SSB_PCMCIAHOST=y
+# CONFIG_SSB_DEBUG is not set
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_DRIVER_PCICORE=y
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_SM501=m
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
+
+#
+# Multimedia drivers
+#
+CONFIG_VIDEO_SAA7146=m
+CONFIG_VIDEO_SAA7146_VV=m
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_MT2131=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_DMA_SG=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEOBUF_DVB=m
+CONFIG_VIDEO_BTCX=m
+CONFIG_VIDEO_IR_I2C=m
+CONFIG_VIDEO_IR=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_TUNER=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+CONFIG_VIDEO_TVAUDIO=m
+CONFIG_VIDEO_TDA7432=m
+CONFIG_VIDEO_TDA9840=m
+CONFIG_VIDEO_TDA9875=m
+CONFIG_VIDEO_TEA6415C=m
+CONFIG_VIDEO_TEA6420=m
+CONFIG_VIDEO_MSP3400=m
+CONFIG_VIDEO_CS5345=m
+CONFIG_VIDEO_CS53L32A=m
+CONFIG_VIDEO_M52790=m
+CONFIG_VIDEO_TLV320AIC23B=m
+CONFIG_VIDEO_WM8775=m
+CONFIG_VIDEO_WM8739=m
+CONFIG_VIDEO_VP27SMPX=m
+
+#
+# Video decoders
+#
+CONFIG_VIDEO_BT819=m
+CONFIG_VIDEO_BT856=m
+CONFIG_VIDEO_BT866=m
+CONFIG_VIDEO_KS0127=m
+CONFIG_VIDEO_OV7670=m
+CONFIG_VIDEO_TCM825X=m
+CONFIG_VIDEO_SAA7110=m
+CONFIG_VIDEO_SAA7111=m
+CONFIG_VIDEO_SAA7114=m
+CONFIG_VIDEO_SAA711X=m
+CONFIG_VIDEO_SAA717X=m
+CONFIG_VIDEO_SAA7191=m
+CONFIG_VIDEO_TVP5150=m
+CONFIG_VIDEO_VPX3220=m
+
+#
+# Video and audio decoders
+#
+CONFIG_VIDEO_CX25840=m
+
+#
+# MPEG video encoders
+#
+CONFIG_VIDEO_CX2341X=m
+
+#
+# Video encoders
+#
+CONFIG_VIDEO_SAA7127=m
+CONFIG_VIDEO_SAA7185=m
+CONFIG_VIDEO_ADV7170=m
+CONFIG_VIDEO_ADV7175=m
+
+#
+# Video improvement chips
+#
+CONFIG_VIDEO_UPD64031A=m
+CONFIG_VIDEO_UPD64083=m
+# CONFIG_VIDEO_VIVI is not set
+CONFIG_VIDEO_BT848=m
+CONFIG_VIDEO_BT848_DVB=y
+CONFIG_VIDEO_SAA6588=m
+# CONFIG_VIDEO_PMS is not set
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_PP=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_TUNER_3036=m
+# CONFIG_VIDEO_STRADIS is not set
+# CONFIG_VIDEO_ZORAN is not set
+CONFIG_VIDEO_SAA7134=m
+CONFIG_VIDEO_SAA7134_ALSA=m
+CONFIG_VIDEO_SAA7134_DVB=m
+CONFIG_VIDEO_MXB=m
+CONFIG_VIDEO_DPC=m
+CONFIG_VIDEO_HEXIUM_ORION=m
+CONFIG_VIDEO_HEXIUM_GEMINI=m
+CONFIG_VIDEO_CX88=m
+CONFIG_VIDEO_CX88_ALSA=m
+CONFIG_VIDEO_CX88_BLACKBIRD=m
+CONFIG_VIDEO_CX88_DVB=m
+CONFIG_VIDEO_CX88_VP3054=m
+CONFIG_VIDEO_CX23885=m
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_IVTV=m
+CONFIG_VIDEO_FB_IVTV=m
+CONFIG_VIDEO_CX18=m
+# CONFIG_VIDEO_CAFE_CCIC is not set
+CONFIG_V4L_USB_DRIVERS=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_PVRUSB2_SYSFS=y
+CONFIG_VIDEO_PVRUSB2_DVB=y
+# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
+CONFIG_VIDEO_EM28XX=m
+CONFIG_VIDEO_EM28XX_ALSA=m
+CONFIG_VIDEO_EM28XX_DVB=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_USBVIDEO=m
+CONFIG_USB_VICAM=m
+CONFIG_USB_IBMCAM=m
+CONFIG_USB_KONICAWC=m
+CONFIG_USB_QUICKCAM_MESSENGER=m
+CONFIG_USB_ET61X251=m
+CONFIG_VIDEO_OVCAMCHIP=m
+CONFIG_USB_W9968CF=m
+CONFIG_USB_OV511=m
+CONFIG_USB_SE401=m
+CONFIG_USB_SN9C102=m
+CONFIG_USB_STV680=m
+CONFIG_USB_ZC0301=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_MT9M001=m
+# CONFIG_MT9M001_PCA9536_SWITCH is not set
+CONFIG_SOC_CAMERA_MT9V022=m
+# CONFIG_MT9V022_PCA9536_SWITCH is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+CONFIG_RADIO_GEMTEK_PCI=m
+CONFIG_RADIO_MAXIRADIO=m
+CONFIG_RADIO_MAESTRO=m
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+CONFIG_USB_DSBR=m
+CONFIG_USB_SI470X=m
+CONFIG_DVB_CAPTURE_DRIVERS=y
+
+#
+# Supported SAA7146 based PCI Adapters
+#
+CONFIG_TTPCI_EEPROM=m
+CONFIG_DVB_AV7110=m
+CONFIG_DVB_AV7110_OSD=y
+CONFIG_DVB_BUDGET_CORE=m
+CONFIG_DVB_BUDGET=m
+CONFIG_DVB_BUDGET_CI=m
+CONFIG_DVB_BUDGET_AV=m
+CONFIG_DVB_BUDGET_PATCH=m
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_TTUSB_BUDGET=m
+CONFIG_DVB_TTUSB_DEC=m
+CONFIG_DVB_CINERGYT2=m
+CONFIG_DVB_CINERGYT2_TUNING=y
+CONFIG_DVB_CINERGYT2_STREAM_URB_COUNT=32
+CONFIG_DVB_CINERGYT2_STREAM_BUF_SIZE=512
+CONFIG_DVB_CINERGYT2_QUERY_INTERVAL=250
+CONFIG_DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE=y
+CONFIG_DVB_CINERGYT2_RC_QUERY_INTERVAL=100
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+CONFIG_DVB_B2C2_FLEXCOP=m
+CONFIG_DVB_B2C2_FLEXCOP_PCI=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
+
+#
+# Supported BT878 Adapters
+#
+CONFIG_DVB_BT8XX=m
+
+#
+# Supported Pluto2 Adapters
+#
+CONFIG_DVB_PLUTO2=m
+
+#
+# Supported DVB Frontends
+#
+
+#
+# Customise DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+
+#
+# DVB-S (satellite) frontends
+#
+CONFIG_DVB_CX24110=m
+CONFIG_DVB_CX24123=m
+CONFIG_DVB_MT312=m
+CONFIG_DVB_S5H1420=m
+CONFIG_DVB_STV0299=m
+CONFIG_DVB_TDA8083=m
+CONFIG_DVB_TDA10086=m
+CONFIG_DVB_VES1X93=m
+CONFIG_DVB_TUNER_ITD1000=m
+CONFIG_DVB_TDA826X=m
+CONFIG_DVB_TUA6100=m
+
+#
+# DVB-T (terrestrial) frontends
+#
+CONFIG_DVB_SP8870=m
+CONFIG_DVB_SP887X=m
+CONFIG_DVB_CX22700=m
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_L64781=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_NXT6000=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_TDA10048=m
+
+#
+# DVB-C (cable) frontends
+#
+CONFIG_DVB_VES1820=m
+CONFIG_DVB_TDA10021=m
+CONFIG_DVB_TDA10023=m
+CONFIG_DVB_STV0297=m
+
+#
+# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
+#
+CONFIG_DVB_NXT200X=m
+CONFIG_DVB_OR51211=m
+CONFIG_DVB_OR51132=m
+CONFIG_DVB_BCM3510=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_S5H1409=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+
+#
+# Digital terrestrial only tuners/PLL
+#
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+
+#
+# SEC control devices for DVB-S
+#
+CONFIG_DVB_LNBP21=m
+CONFIG_DVB_ISL6405=m
+CONFIG_DVB_ISL6421=m
+CONFIG_DAB=y
+CONFIG_USB_DABUSB=m
+
+#
+# Graphics support
+#
+CONFIG_AGP=y
+CONFIG_AGP_UNINORTH=y
+CONFIG_DRM=m
+CONFIG_DRM_TDFX=m
+CONFIG_DRM_R128=m
+CONFIG_DRM_RADEON=m
+CONFIG_DRM_MGA=m
+CONFIG_DRM_SIS=m
+CONFIG_DRM_VIA=m
+CONFIG_DRM_SAVAGE=m
+CONFIG_VGASTATE=y
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+CONFIG_FB_DDC=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+CONFIG_FB_SVGALIB=m
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=m
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+# CONFIG_FB_CONTROL is not set
+CONFIG_FB_PLATINUM=y
+CONFIG_FB_VALKYRIE=y
+CONFIG_FB_CT65550=y
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_NVIDIA=y
+CONFIG_FB_NVIDIA_I2C=y
+# CONFIG_FB_NVIDIA_DEBUG is not set
+CONFIG_FB_NVIDIA_BACKLIGHT=y
+CONFIG_FB_RIVA=m
+# CONFIG_FB_RIVA_I2C is not set
+# CONFIG_FB_RIVA_DEBUG is not set
+CONFIG_FB_RIVA_BACKLIGHT=y
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_MATROX_MULTIHEAD=y
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+CONFIG_FB_ATY128=y
+CONFIG_FB_ATY128_BACKLIGHT=y
+CONFIG_FB_ATY=y
+CONFIG_FB_ATY_CT=y
+CONFIG_FB_ATY_GENERIC_LCD=y
+CONFIG_FB_ATY_GX=y
+CONFIG_FB_ATY_BACKLIGHT=y
+CONFIG_FB_S3=m
+CONFIG_FB_SAVAGE=m
+CONFIG_FB_SAVAGE_I2C=y
+CONFIG_FB_SAVAGE_ACCEL=y
+# CONFIG_FB_SIS is not set
+CONFIG_FB_NEOMAGIC=m
+CONFIG_FB_KYRO=m
+CONFIG_FB_3DFX=m
+CONFIG_FB_3DFX_ACCEL=y
+CONFIG_FB_VOODOO1=m
+# CONFIG_FB_VT8623 is not set
+CONFIG_FB_TRIDENT=m
+CONFIG_FB_TRIDENT_ACCEL=y
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_FSL_DIU is not set
+CONFIG_FB_SM501=m
+CONFIG_FB_IBM_GXT4500=y
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=m
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+CONFIG_VGACON_SOFT_SCROLLBACK=y
+CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+CONFIG_SND_DEBUG_VERBOSE=y
+CONFIG_SND_PCM_XRUN_DEBUG=y
+CONFIG_SND_VMASTER=y
+CONFIG_SND_MPU401_UART=m
+CONFIG_SND_OPL3_LIB=m
+CONFIG_SND_VX_LIB=m
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+CONFIG_SND_DUMMY=m
+CONFIG_SND_VIRMIDI=m
+CONFIG_SND_MTPAV=m
+CONFIG_SND_MTS64=m
+CONFIG_SND_SERIAL_U16550=m
+CONFIG_SND_MPU401=m
+CONFIG_SND_PORTMAN2X4=m
+CONFIG_SND_AC97_POWER_SAVE=y
+CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5
+CONFIG_SND_SB_COMMON=m
+CONFIG_SND_SB16_DSP=m
+CONFIG_SND_ISA=y
+# CONFIG_SND_ADLIB is not set
+# CONFIG_SND_AD1816A is not set
+# CONFIG_SND_AD1848 is not set
+# CONFIG_SND_ALS100 is not set
+# CONFIG_SND_AZT2320 is not set
+# CONFIG_SND_CMI8330 is not set
+# CONFIG_SND_CS4231 is not set
+# CONFIG_SND_CS4232 is not set
+# CONFIG_SND_CS4236 is not set
+# CONFIG_SND_DT019X is not set
+# CONFIG_SND_ES968 is not set
+# CONFIG_SND_ES1688 is not set
+# CONFIG_SND_ES18XX is not set
+# CONFIG_SND_SC6000 is not set
+# CONFIG_SND_GUSCLASSIC is not set
+# CONFIG_SND_GUSEXTREME is not set
+# CONFIG_SND_GUSMAX is not set
+# CONFIG_SND_INTERWAVE is not set
+# CONFIG_SND_INTERWAVE_STB is not set
+# CONFIG_SND_OPL3SA2 is not set
+# CONFIG_SND_OPTI92X_AD1848 is not set
+# CONFIG_SND_OPTI92X_CS4231 is not set
+# CONFIG_SND_OPTI93X is not set
+# CONFIG_SND_MIRO is not set
+# CONFIG_SND_SB8 is not set
+# CONFIG_SND_SB16 is not set
+# CONFIG_SND_SBAWE is not set
+# CONFIG_SND_SGALAXY is not set
+# CONFIG_SND_SSCAPE is not set
+# CONFIG_SND_WAVEFRONT is not set
+CONFIG_SND_PCI=y
+CONFIG_SND_AD1889=m
+CONFIG_SND_ALS300=m
+CONFIG_SND_ALS4000=m
+CONFIG_SND_ALI5451=m
+CONFIG_SND_ATIIXP=m
+CONFIG_SND_ATIIXP_MODEM=m
+CONFIG_SND_AU8810=m
+CONFIG_SND_AU8820=m
+CONFIG_SND_AU8830=m
+CONFIG_SND_AW2=m
+CONFIG_SND_AZT3328=m
+CONFIG_SND_BT87X=m
+# CONFIG_SND_BT87X_OVERCLOCK is not set
+CONFIG_SND_CA0106=m
+CONFIG_SND_CMIPCI=m
+CONFIG_SND_OXYGEN_LIB=m
+CONFIG_SND_OXYGEN=m
+CONFIG_SND_CS4281=m
+CONFIG_SND_CS46XX=m
+CONFIG_SND_CS46XX_NEW_DSP=y
+CONFIG_SND_CS5530=m
+CONFIG_SND_DARLA20=m
+CONFIG_SND_GINA20=m
+CONFIG_SND_LAYLA20=m
+CONFIG_SND_DARLA24=m
+CONFIG_SND_GINA24=m
+CONFIG_SND_LAYLA24=m
+CONFIG_SND_MONA=m
+CONFIG_SND_MIA=m
+CONFIG_SND_ECHO3G=m
+CONFIG_SND_INDIGO=m
+CONFIG_SND_INDIGOIO=m
+CONFIG_SND_INDIGODJ=m
+CONFIG_SND_EMU10K1=m
+CONFIG_SND_EMU10K1X=m
+CONFIG_SND_ENS1370=m
+CONFIG_SND_ENS1371=m
+CONFIG_SND_ES1938=m
+CONFIG_SND_ES1968=m
+CONFIG_SND_FM801=m
+CONFIG_SND_FM801_TEA575X_BOOL=y
+CONFIG_SND_FM801_TEA575X=m
+# CONFIG_SND_HDA_INTEL is not set
+CONFIG_SND_HDSP=m
+CONFIG_SND_HDSPM=m
+CONFIG_SND_HIFIER=m
+CONFIG_SND_ICE1712=m
+CONFIG_SND_ICE1724=m
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+CONFIG_SND_KORG1212=m
+CONFIG_SND_MAESTRO3=m
+CONFIG_SND_MIXART=m
+CONFIG_SND_NM256=m
+CONFIG_SND_PCXHR=m
+CONFIG_SND_RIPTIDE=m
+CONFIG_SND_RME32=m
+CONFIG_SND_RME96=m
+CONFIG_SND_RME9652=m
+CONFIG_SND_SONICVIBES=m
+CONFIG_SND_TRIDENT=m
+CONFIG_SND_VIA82XX=m
+CONFIG_SND_VIA82XX_MODEM=m
+CONFIG_SND_VIRTUOSO=m
+CONFIG_SND_VX222=m
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_PPC=y
+CONFIG_SND_POWERMAC=m
+CONFIG_SND_POWERMAC_AUTO_DRC=y
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
+CONFIG_SND_AOA_SOUNDBUS=m
+CONFIG_SND_AOA_SOUNDBUS_I2S=m
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_USX2Y=m
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+# CONFIG_SND_PCMCIA is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HID_DEBUG=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT_POWERBOOK=y
+CONFIG_HID_FF=y
+CONFIG_HID_PID=y
+CONFIG_LOGITECH_FF=y
+CONFIG_LOGIRUMBLEPAD2_FF=y
+CONFIG_PANTHERLORD_FF=y
+CONFIG_THRUSTMASTER_FF=y
+CONFIG_ZEROPLUS_FF=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_OHCI_HCD_PPC_SOC=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PCI=y
+# CONFIG_USB_OHCI_HCD_SSB is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+CONFIG_USB_UHCI_HCD=m
+CONFIG_USB_U132_HCD=m
+CONFIG_USB_SL811_HCD=m
+# CONFIG_USB_SL811_CS is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_ISD200 is not set
+CONFIG_USB_STORAGE_DPCM=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+CONFIG_USB_USS720=m
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_AIRPRIME=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+CONFIG_USB_SERIAL_CP2101=m
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+# CONFIG_USB_SERIAL_GARMIN is not set
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+CONFIG_USB_SERIAL_SAFE_PADDED=y
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_AUERSWALD=m
+# CONFIG_USB_RIO500 is not set
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
+CONFIG_USB_LED=m
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+CONFIG_USB_PHIDGET=m
+CONFIG_USB_PHIDGETKIT=m
+CONFIG_USB_PHIDGETMOTORCONTROL=m
+CONFIG_USB_PHIDGETSERVO=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+CONFIG_USB_LD=m
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+# CONFIG_USB_TEST is not set
+CONFIG_USB_ISIGHTFW=m
+CONFIG_USB_ATM=m
+CONFIG_USB_SPEEDTOUCH=m
+CONFIG_USB_CXACRU=m
+CONFIG_USB_UEAGLEATM=m
+CONFIG_USB_XUSBATM=m
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_GPIO is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+CONFIG_ACCESSIBILITY=y
+CONFIG_A11Y_BRAILLE_CONSOLE=y
+# CONFIG_INFINIBAND is not set
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=m
+CONFIG_RTC_DRV_DS1374=m
+CONFIG_RTC_DRV_DS1672=m
+CONFIG_RTC_DRV_MAX6900=m
+CONFIG_RTC_DRV_RS5C372=m
+CONFIG_RTC_DRV_ISL1208=m
+CONFIG_RTC_DRV_X1205=m
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_PCF8583=m
+CONFIG_RTC_DRV_M41T80=m
+CONFIG_RTC_DRV_M41T80_WDT=y
+# CONFIG_RTC_DRV_S35390A is not set
+CONFIG_RTC_DRV_FM3130=m
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1511=m
+CONFIG_RTC_DRV_DS1553=m
+CONFIG_RTC_DRV_DS1742=m
+CONFIG_RTC_DRV_STK17TA8=m
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_M48T59=m
+CONFIG_RTC_DRV_V3020=m
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_PPC=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_FSL_DMA is not set
+CONFIG_AUXDISPLAY=y
+CONFIG_KS0108=m
+CONFIG_KS0108_PORT=0x378
+CONFIG_KS0108_DELAY=2
+CONFIG_UIO=m
+CONFIG_UIO_CIF=m
+CONFIG_UIO_SMX=m
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_FS_XIP=y
+CONFIG_EXT3_FS=m
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4DEV_FS=m
+CONFIG_EXT4DEV_FS_XATTR=y
+CONFIG_EXT4DEV_FS_POSIX_ACL=y
+CONFIG_EXT4DEV_FS_SECURITY=y
+CONFIG_JBD=m
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+CONFIG_JBD2_DEBUG=y
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=m
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+CONFIG_XFS_QUOTA=y
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=m
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+CONFIG_ECRYPT_FS=m
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+CONFIG_BEFS_FS=m
+# CONFIG_BEFS_DEBUG is not set
+CONFIG_BFS_FS=m
+CONFIG_EFS_FS=m
+CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+CONFIG_VXFS_FS=m
+CONFIG_MINIX_FS=m
+# CONFIG_HPFS_FS is not set
+CONFIG_QNX4FS_FS=m
+CONFIG_ROMFS_FS=m
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+CONFIG_SUNRPC_GSS=m
+CONFIG_SUNRPC_BIND34=y
+CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+CONFIG_CIFS_WEAK_PW_HASH=y
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+CONFIG_CIFS_EXPERIMENTAL=y
+CONFIG_CIFS_UPCALL=y
+CONFIG_CIFS_DFS_UPCALL=y
+CONFIG_NCP_FS=m
+CONFIG_NCPFS_PACKET_SIGNING=y
+CONFIG_NCPFS_IOCTL_LOCKING=y
+CONFIG_NCPFS_STRONG=y
+CONFIG_NCPFS_NFS_NS=y
+CONFIG_NCPFS_OS2_NS=y
+CONFIG_NCPFS_SMALLDOS=y
+CONFIG_NCPFS_NLS=y
+CONFIG_NCPFS_EXTRAS=y
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+# CONFIG_AFS_FS is not set
+CONFIG_9P_FS=m
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+CONFIG_SGI_PARTITION=y
+# CONFIG_ULTRIX_PARTITION is not set
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+CONFIG_DLM=m
+CONFIG_DLM_DEBUG=y
+CONFIG_QE_GPIO=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_UNUSED_SYMBOLS=y
+CONFIG_DEBUG_FS=y
+CONFIG_HEADERS_CHECK=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_OBJECTS=y
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+CONFIG_DEBUG_OBJECTS_FREE=y
+CONFIG_DEBUG_OBJECTS_TIMERS=y
+CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_HIGHMEM=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_WRITECOUNT=y
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
+CONFIG_FRAME_POINTER=y
+CONFIG_BOOT_PRINTK_DELAY=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_LKDTM is not set
+CONFIG_FAULT_INJECTION=y
+CONFIG_FAILSLAB=y
+CONFIG_FAIL_PAGE_ALLOC=y
+CONFIG_FAIL_MAKE_REQUEST=y
+CONFIG_FAULT_INJECTION_DEBUG_FS=y
+CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
+CONFIG_LATENCYTOP=y
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_TRACING=y
+CONFIG_FTRACE=y
+CONFIG_SCHED_TRACER=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
+# CONFIG_SAMPLES is not set
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+CONFIG_DEBUGGER=y
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_KGDB_CONSOLE is not set
+CONFIG_XMON=y
+# CONFIG_XMON_DEFAULT is not set
+CONFIG_XMON_DISASSEMBLY=y
+CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_BDI_SWITCH is not set
+CONFIG_BOOTX_TEXT=y
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_NETWORK=y
+CONFIG_SECURITY_NETWORK_XFRM=y
+CONFIG_SECURITY_FILE_CAPABILITIES=y
+# CONFIG_SECURITY_ROOTPLUG is not set
+CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=65536
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
+CONFIG_SECURITY_SELINUX_DISABLE=y
+CONFIG_SECURITY_SELINUX_DEVELOP=y
+CONFIG_SECURITY_SELINUX_AVC_STATS=y
+CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
+CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
+# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_SMACK is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_DEV_HIFN_795X=m
+CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
+CONFIG_CRYPTO_DEV_TALITOS=m
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_VIRTIO=m
+CONFIG_VIRTIO_RING=m
+CONFIG_VIRTIO_PCI=m
+CONFIG_VIRTIO_BALLOON=m
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 71d79e428d20..f9a3d3b394cf 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Mon Apr 28 12:39:10 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 16 13:59:24 2008
 #
 CONFIG_PPC64=y
 
@@ -14,8 +14,9 @@ CONFIG_POWER4=y
 CONFIG_TUNE_CELL=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
+# CONFIG_VSX is not set
 CONFIG_PPC_STD_MMU=y
-# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_MM_SLICES=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
@@ -31,6 +32,7 @@ CONFIG_GENERIC_HARDIRQS=y
 CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -90,6 +92,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -117,12 +120,15 @@ CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -132,6 +138,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -152,13 +159,8 @@ CONFIG_CLASSIC_RCU=y
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_82xx is not set
-# CONFIG_PPC_83xx is not set
-# CONFIG_PPC_86xx is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -187,6 +189,7 @@ CONFIG_PPC_CELL=y
 # Cell Broadband Engine options
 #
 CONFIG_SPU_FS=y
+CONFIG_SPU_FS_64K_LS=y
 CONFIG_SPU_BASE=y
 # CONFIG_PQ2ADS is not set
 # CONFIG_IPIC is not set
@@ -222,6 +225,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_BINFMT_ELF=y
 CONFIG_COMPAT_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
+CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
 # CONFIG_IOMMU_VMERGE is not set
 CONFIG_IOMMU_HELPER=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -248,18 +252,22 @@ CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
 # CONFIG_SPARSEMEM_VMEMMAP is not set
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_ARCH_MEMORY_PROBE=y
-# CONFIG_PPC_HAS_HASH_64K is not set
+CONFIG_PPC_HAS_HASH_64K=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
-# CONFIG_SCHED_SMT is not set
+CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
-# CONFIG_PM is not set
+CONFIG_EXTRA_TARGETS=""
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
 
@@ -273,6 +281,7 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PCI_SYSCALL is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
+# CONFIG_HAS_RAPIDIO is not set
 CONFIG_PAGE_OFFSET=0xc000000000000000
 CONFIG_KERNEL_START=0xc000000000000000
 CONFIG_PHYSICAL_START=0x00000000
@@ -412,6 +421,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -478,6 +489,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 # CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
@@ -533,8 +545,18 @@ CONFIG_USB_NET_MCS7830=m
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
 # CONFIG_WAN is not set
-# CONFIG_PPP is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -603,6 +625,7 @@ CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -618,23 +641,17 @@ CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_HANGCHECK_TIMER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -652,8 +669,17 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -671,8 +697,8 @@ CONFIG_FB=y
 CONFIG_FB_SYS_FILLRECT=y
 CONFIG_FB_SYS_COPYAREA=y
 CONFIG_FB_SYS_IMAGEBLIT=y
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -712,18 +738,12 @@ CONFIG_FB_LOGO_EXTRA=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
 # CONFIG_SND_SEQUENCER is not set
 # CONFIG_SND_MIXER_OSS is not set
 # CONFIG_SND_PCM_OSS is not set
@@ -732,53 +752,20 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# ALSA PowerMac requires I2C
-#
-
-#
-# ALSA PowerPC devices
-#
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_PPC=y
 CONFIG_SND_PS3=m
 CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
 # CONFIG_SND_USB_USX2Y is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
+CONFIG_HIDRAW=y
 
 #
 # USB Input Devices
@@ -807,17 +794,20 @@ CONFIG_USB=m
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
 # CONFIG_USB_OTG is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
 # CONFIG_USB_EHCI_HCD_PPC_OF is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -831,6 +821,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -890,12 +881,45 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_EDAC is not set
-# CONFIG_RTC_CLASS is not set
+CONFIG_RTC_LIB=m
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_PPC=m
 # CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
@@ -911,6 +935,7 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
@@ -959,8 +984,8 @@ CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1059,12 +1084,15 @@ CONFIG_NLS_ISO8859_1=y
 #
 CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=m
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
 CONFIG_LZO_COMPRESS=m
 CONFIG_LZO_DECOMPRESS=m
 CONFIG_PLIST=y
@@ -1082,7 +1110,7 @@ CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=2048
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
@@ -1090,33 +1118,49 @@ CONFIG_DETECT_SOFTLOCKUP=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
 # CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_LOCKDEP=y
+CONFIG_TRACE_IRQFLAGS=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_WRITECOUNT=y
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_PAGEALLOC is not set
 # CONFIG_DEBUGGER is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
 CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1172,6 +1216,10 @@ CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index adaa05fb0478..fe6ffa683d78 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -946,6 +946,7 @@ CONFIG_HVC_DRIVER=y
 CONFIG_HVC_CONSOLE=y
 CONFIG_HVC_RTAS=y
 CONFIG_HVCS=m
+CONFIG_IBM_BSR=m
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
diff --git a/arch/powerpc/include/asm/8253pit.h b/arch/powerpc/include/asm/8253pit.h
new file mode 100644
index 000000000000..b70d6e53b303
--- /dev/null
+++ b/arch/powerpc/include/asm/8253pit.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_POWERPC_8253PIT_H
+#define _ASM_POWERPC_8253PIT_H
+
+/*
+ * 8253/8254 Programmable Interval Timer
+ */
+
+#define PIT_TICK_RATE	1193182UL
+
+#endif	/* _ASM_POWERPC_8253PIT_H */
diff --git a/arch/powerpc/include/asm/8xx_immap.h b/arch/powerpc/include/asm/8xx_immap.h
new file mode 100644
index 000000000000..4b0e15206006
--- /dev/null
+++ b/arch/powerpc/include/asm/8xx_immap.h
@@ -0,0 +1,564 @@
+/*
+ * MPC8xx Internal Memory Map
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * The I/O on the MPC860 is comprised of blocks of special registers
+ * and the dual port ram for the Communication Processor Module.
+ * Within this space are functional units such as the SIU, memory
+ * controller, system timers, and other control functions.  It is
+ * a combination that I found difficult to separate into logical
+ * functional files.....but anyone else is welcome to try.  -- Dan
+ */
+#ifdef __KERNEL__
+#ifndef __IMMAP_8XX__
+#define __IMMAP_8XX__
+
+/* System configuration registers.
+*/
+typedef	struct sys_conf {
+	uint	sc_siumcr;
+	uint	sc_sypcr;
+	uint	sc_swt;
+	char	res1[2];
+	ushort	sc_swsr;
+	uint	sc_sipend;
+	uint	sc_simask;
+	uint	sc_siel;
+	uint	sc_sivec;
+	uint	sc_tesr;
+	char	res2[0xc];
+	uint	sc_sdcr;
+	char	res3[0x4c];
+} sysconf8xx_t;
+
+/* PCMCIA configuration registers.
+*/
+typedef struct pcmcia_conf {
+	uint	pcmc_pbr0;
+	uint	pcmc_por0;
+	uint	pcmc_pbr1;
+	uint	pcmc_por1;
+	uint	pcmc_pbr2;
+	uint	pcmc_por2;
+	uint	pcmc_pbr3;
+	uint	pcmc_por3;
+	uint	pcmc_pbr4;
+	uint	pcmc_por4;
+	uint	pcmc_pbr5;
+	uint	pcmc_por5;
+	uint	pcmc_pbr6;
+	uint	pcmc_por6;
+	uint	pcmc_pbr7;
+	uint	pcmc_por7;
+	char	res1[0x20];
+	uint	pcmc_pgcra;
+	uint	pcmc_pgcrb;
+	uint	pcmc_pscr;
+	char	res2[4];
+	uint	pcmc_pipr;
+	char	res3[4];
+	uint	pcmc_per;
+	char	res4[4];
+} pcmconf8xx_t;
+
+/* Memory controller registers.
+*/
+typedef struct	mem_ctlr {
+	uint	memc_br0;
+	uint	memc_or0;
+	uint	memc_br1;
+	uint	memc_or1;
+	uint	memc_br2;
+	uint	memc_or2;
+	uint	memc_br3;
+	uint	memc_or3;
+	uint	memc_br4;
+	uint	memc_or4;
+	uint	memc_br5;
+	uint	memc_or5;
+	uint	memc_br6;
+	uint	memc_or6;
+	uint	memc_br7;
+	uint	memc_or7;
+	char	res1[0x24];
+	uint	memc_mar;
+	uint	memc_mcr;
+	char	res2[4];
+	uint	memc_mamr;
+	uint	memc_mbmr;
+	ushort	memc_mstat;
+	ushort	memc_mptpr;
+	uint	memc_mdr;
+	char	res3[0x80];
+} memctl8xx_t;
+
+/*-----------------------------------------------------------------------
+ * BR - Memory Controler: Base Register					16-9
+ */
+#define BR_BA_MSK	0xffff8000	/* Base Address Mask			*/
+#define BR_AT_MSK	0x00007000	/* Address Type Mask			*/
+#define BR_PS_MSK	0x00000c00	/* Port Size Mask			*/
+#define BR_PS_32	0x00000000	/* 32 bit port size			*/
+#define BR_PS_16	0x00000800	/* 16 bit port size			*/
+#define BR_PS_8		0x00000400	/*  8 bit port size			*/
+#define BR_PARE		0x00000200	/* Parity Enable			*/
+#define BR_WP		0x00000100	/* Write Protect			*/
+#define BR_MS_MSK	0x000000c0	/* Machine Select Mask			*/
+#define BR_MS_GPCM	0x00000000	/* G.P.C.M. Machine Select		*/
+#define BR_MS_UPMA	0x00000080	/* U.P.M.A Machine Select		*/
+#define BR_MS_UPMB	0x000000c0	/* U.P.M.B Machine Select		*/
+#define BR_V		0x00000001	/* Bank Valid				*/
+
+/*-----------------------------------------------------------------------
+ * OR - Memory Controler: Option Register				16-11
+ */
+#define OR_AM_MSK	0xffff8000	/* Address Mask Mask			*/
+#define OR_ATM_MSK	0x00007000	/* Address Type Mask Mask		*/
+#define OR_CSNT_SAM	0x00000800	/* Chip Select Negation Time/ Start	*/
+					/* Address Multiplex			*/
+#define OR_ACS_MSK	0x00000600	/* Address to Chip Select Setup mask	*/
+#define OR_ACS_DIV1	0x00000000	/* CS is output at the same time	*/
+#define OR_ACS_DIV4	0x00000400	/* CS is output 1/4 a clock later	*/
+#define OR_ACS_DIV2	0x00000600	/* CS is output 1/2 a clock later	*/
+#define OR_G5LA		0x00000400	/* Output #GPL5 on #GPL_A5		*/
+#define OR_G5LS		0x00000200	/* Drive #GPL high on falling edge of...*/
+#define OR_BI		0x00000100	/* Burst inhibit			*/
+#define OR_SCY_MSK	0x000000f0	/* Cycle Length in Clocks		*/
+#define OR_SCY_0_CLK	0x00000000	/* 0 clock cycles wait states		*/
+#define OR_SCY_1_CLK	0x00000010	/* 1 clock cycles wait states		*/
+#define OR_SCY_2_CLK	0x00000020	/* 2 clock cycles wait states		*/
+#define OR_SCY_3_CLK	0x00000030	/* 3 clock cycles wait states		*/
+#define OR_SCY_4_CLK	0x00000040	/* 4 clock cycles wait states		*/
+#define OR_SCY_5_CLK	0x00000050	/* 5 clock cycles wait states		*/
+#define OR_SCY_6_CLK	0x00000060	/* 6 clock cycles wait states		*/
+#define OR_SCY_7_CLK	0x00000070	/* 7 clock cycles wait states		*/
+#define OR_SCY_8_CLK	0x00000080	/* 8 clock cycles wait states		*/
+#define OR_SCY_9_CLK	0x00000090	/* 9 clock cycles wait states		*/
+#define OR_SCY_10_CLK	0x000000a0	/* 10 clock cycles wait states		*/
+#define OR_SCY_11_CLK	0x000000b0	/* 11 clock cycles wait states		*/
+#define OR_SCY_12_CLK	0x000000c0	/* 12 clock cycles wait states		*/
+#define OR_SCY_13_CLK	0x000000d0	/* 13 clock cycles wait states		*/
+#define OR_SCY_14_CLK	0x000000e0	/* 14 clock cycles wait states		*/
+#define OR_SCY_15_CLK	0x000000f0	/* 15 clock cycles wait states		*/
+#define OR_SETA		0x00000008	/* External Transfer Acknowledge	*/
+#define OR_TRLX		0x00000004	/* Timing Relaxed			*/
+#define OR_EHTR		0x00000002	/* Extended Hold Time on Read		*/
+
+/* System Integration Timers.
+*/
+typedef struct	sys_int_timers {
+	ushort	sit_tbscr;
+	char	res0[0x02];
+	uint	sit_tbreff0;
+	uint	sit_tbreff1;
+	char	res1[0x14];
+	ushort	sit_rtcsc;
+	char	res2[0x02];
+	uint	sit_rtc;
+	uint	sit_rtsec;
+	uint	sit_rtcal;
+	char	res3[0x10];
+	ushort	sit_piscr;
+	char	res4[2];
+	uint	sit_pitc;
+	uint	sit_pitr;
+	char	res5[0x34];
+} sit8xx_t;
+
+#define TBSCR_TBIRQ_MASK	((ushort)0xff00)
+#define TBSCR_REFA		((ushort)0x0080)
+#define TBSCR_REFB		((ushort)0x0040)
+#define TBSCR_REFAE		((ushort)0x0008)
+#define TBSCR_REFBE		((ushort)0x0004)
+#define TBSCR_TBF		((ushort)0x0002)
+#define TBSCR_TBE		((ushort)0x0001)
+
+#define RTCSC_RTCIRQ_MASK	((ushort)0xff00)
+#define RTCSC_SEC		((ushort)0x0080)
+#define RTCSC_ALR		((ushort)0x0040)
+#define RTCSC_38K		((ushort)0x0010)
+#define RTCSC_SIE		((ushort)0x0008)
+#define RTCSC_ALE		((ushort)0x0004)
+#define RTCSC_RTF		((ushort)0x0002)
+#define RTCSC_RTE		((ushort)0x0001)
+
+#define PISCR_PIRQ_MASK		((ushort)0xff00)
+#define PISCR_PS		((ushort)0x0080)
+#define PISCR_PIE		((ushort)0x0004)
+#define PISCR_PTF		((ushort)0x0002)
+#define PISCR_PTE		((ushort)0x0001)
+
+/* Clocks and Reset.
+*/
+typedef struct clk_and_reset {
+	uint	car_sccr;
+	uint	car_plprcr;
+	uint	car_rsr;
+	char	res[0x74];        /* Reserved area                  */
+} car8xx_t;
+
+/* System Integration Timers keys.
+*/
+typedef struct sitk {
+	uint	sitk_tbscrk;
+	uint	sitk_tbreff0k;
+	uint	sitk_tbreff1k;
+	uint	sitk_tbk;
+	char	res1[0x10];
+	uint	sitk_rtcsck;
+	uint	sitk_rtck;
+	uint	sitk_rtseck;
+	uint	sitk_rtcalk;
+	char	res2[0x10];
+	uint	sitk_piscrk;
+	uint	sitk_pitck;
+	char	res3[0x38];
+} sitk8xx_t;
+
+/* Clocks and reset keys.
+*/
+typedef struct cark {
+	uint	cark_sccrk;
+	uint	cark_plprcrk;
+	uint	cark_rsrk;
+	char	res[0x474];
+} cark8xx_t;
+
+/* The key to unlock registers maintained by keep-alive power.
+*/
+#define KAPWR_KEY	((unsigned int)0x55ccaa33)
+
+/* Video interface.  MPC823 Only.
+*/
+typedef struct vid823 {
+	ushort	vid_vccr;
+	ushort	res1;
+	u_char	vid_vsr;
+	u_char	res2;
+	u_char	vid_vcmr;
+	u_char	res3;
+	uint	vid_vbcb;
+	uint	res4;
+	uint	vid_vfcr0;
+	uint	vid_vfaa0;
+	uint	vid_vfba0;
+	uint	vid_vfcr1;
+	uint	vid_vfaa1;
+	uint	vid_vfba1;
+	u_char	res5[0x18];
+} vid823_t;
+
+/* LCD interface.  823 Only.
+*/
+typedef struct lcd {
+	uint	lcd_lccr;
+	uint	lcd_lchcr;
+	uint	lcd_lcvcr;
+	char	res1[4];
+	uint	lcd_lcfaa;
+	uint	lcd_lcfba;
+	char	lcd_lcsr;
+	char	res2[0x7];
+} lcd823_t;
+
+/* I2C
+*/
+typedef struct i2c {
+	u_char	i2c_i2mod;
+	char	res1[3];
+	u_char	i2c_i2add;
+	char	res2[3];
+	u_char	i2c_i2brg;
+	char	res3[3];
+	u_char	i2c_i2com;
+	char	res4[3];
+	u_char	i2c_i2cer;
+	char	res5[3];
+	u_char	i2c_i2cmr;
+	char	res6[0x8b];
+} i2c8xx_t;
+
+/* DMA control/status registers.
+*/
+typedef struct sdma_csr {
+	char	res1[4];
+	uint	sdma_sdar;
+	u_char	sdma_sdsr;
+	char	res3[3];
+	u_char	sdma_sdmr;
+	char	res4[3];
+	u_char	sdma_idsr1;
+	char	res5[3];
+	u_char	sdma_idmr1;
+	char	res6[3];
+	u_char	sdma_idsr2;
+	char	res7[3];
+	u_char	sdma_idmr2;
+	char	res8[0x13];
+} sdma8xx_t;
+
+/* Communication Processor Module Interrupt Controller.
+*/
+typedef struct cpm_ic {
+	ushort	cpic_civr;
+	char	res[0xe];
+	uint	cpic_cicr;
+	uint	cpic_cipr;
+	uint	cpic_cimr;
+	uint	cpic_cisr;
+} cpic8xx_t;
+
+/* Input/Output Port control/status registers.
+*/
+typedef struct io_port {
+	ushort	iop_padir;
+	ushort	iop_papar;
+	ushort	iop_paodr;
+	ushort	iop_padat;
+	char	res1[8];
+	ushort	iop_pcdir;
+	ushort	iop_pcpar;
+	ushort	iop_pcso;
+	ushort	iop_pcdat;
+	ushort	iop_pcint;
+	char	res2[6];
+	ushort	iop_pddir;
+	ushort	iop_pdpar;
+	char	res3[2];
+	ushort	iop_pddat;
+	uint	utmode;
+	char	res4[4];
+} iop8xx_t;
+
+/* Communication Processor Module Timers
+*/
+typedef struct cpm_timers {
+	ushort	cpmt_tgcr;
+	char	res1[0xe];
+	ushort	cpmt_tmr1;
+	ushort	cpmt_tmr2;
+	ushort	cpmt_trr1;
+	ushort	cpmt_trr2;
+	ushort	cpmt_tcr1;
+	ushort	cpmt_tcr2;
+	ushort	cpmt_tcn1;
+	ushort	cpmt_tcn2;
+	ushort	cpmt_tmr3;
+	ushort	cpmt_tmr4;
+	ushort	cpmt_trr3;
+	ushort	cpmt_trr4;
+	ushort	cpmt_tcr3;
+	ushort	cpmt_tcr4;
+	ushort	cpmt_tcn3;
+	ushort	cpmt_tcn4;
+	ushort	cpmt_ter1;
+	ushort	cpmt_ter2;
+	ushort	cpmt_ter3;
+	ushort	cpmt_ter4;
+	char	res2[8];
+} cpmtimer8xx_t;
+
+/* Finally, the Communication Processor stuff.....
+*/
+typedef struct scc {		/* Serial communication channels */
+	uint	scc_gsmrl;
+	uint	scc_gsmrh;
+	ushort	scc_psmr;
+	char	res1[2];
+	ushort	scc_todr;
+	ushort	scc_dsr;
+	ushort	scc_scce;
+	char	res2[2];
+	ushort	scc_sccm;
+	char	res3;
+	u_char	scc_sccs;
+	char	res4[8];
+} scc_t;
+
+typedef struct smc {		/* Serial management channels */
+	char	res1[2];
+	ushort	smc_smcmr;
+	char	res2[2];
+	u_char	smc_smce;
+	char	res3[3];
+	u_char	smc_smcm;
+	char	res4[5];
+} smc_t;
+
+/* MPC860T Fast Ethernet Controller.  It isn't part of the CPM, but
+ * it fits within the address space.
+ */
+
+typedef struct fec {
+	uint	fec_addr_low;		/* lower 32 bits of station address	*/
+	ushort	fec_addr_high;		/* upper 16 bits of station address	*/
+	ushort	res1;			/* reserved				*/
+	uint	fec_hash_table_high;	/* upper 32-bits of hash table		*/
+	uint	fec_hash_table_low;	/* lower 32-bits of hash table		*/
+	uint	fec_r_des_start;	/* beginning of Rx descriptor ring	*/
+	uint	fec_x_des_start;	/* beginning of Tx descriptor ring	*/
+	uint	fec_r_buff_size;	/* Rx buffer size			*/
+	uint	res2[9];		/* reserved				*/
+	uint	fec_ecntrl;		/* ethernet control register		*/
+	uint	fec_ievent;		/* interrupt event register		*/
+	uint	fec_imask;		/* interrupt mask register		*/
+	uint	fec_ivec;		/* interrupt level and vector status	*/
+	uint	fec_r_des_active;	/* Rx ring updated flag			*/
+	uint	fec_x_des_active;	/* Tx ring updated flag			*/
+	uint	res3[10];		/* reserved				*/
+	uint	fec_mii_data;		/* MII data register			*/
+	uint	fec_mii_speed;		/* MII speed control register		*/
+	uint	res4[17];		/* reserved				*/
+	uint	fec_r_bound;		/* end of RAM (read-only)		*/
+	uint	fec_r_fstart;		/* Rx FIFO start address		*/
+	uint	res5[6];		/* reserved				*/
+	uint	fec_x_fstart;		/* Tx FIFO start address		*/
+	uint	res6[17];		/* reserved				*/
+	uint	fec_fun_code;		/* fec SDMA function code		*/
+	uint	res7[3];		/* reserved				*/
+	uint	fec_r_cntrl;		/* Rx control register			*/
+	uint	fec_r_hash;		/* Rx hash register			*/
+	uint	res8[14];		/* reserved				*/
+	uint	fec_x_cntrl;		/* Tx control register			*/
+	uint	res9[0x1e];		/* reserved				*/
+} fec_t;
+
+/* The FEC and LCD color map share the same address space....
+ * I guess we will never see an 823T :-).
+ */
+union fec_lcd {
+	fec_t	fl_un_fec;
+	u_char	fl_un_cmap[0x200];
+};
+
+typedef struct comm_proc {
+	/* General control and status registers.
+	*/
+	ushort	cp_cpcr;
+	u_char	res1[2];
+	ushort	cp_rccr;
+	u_char	res2;
+	u_char	cp_rmds;
+	u_char	res3[4];
+	ushort	cp_cpmcr1;
+	ushort	cp_cpmcr2;
+	ushort	cp_cpmcr3;
+	ushort	cp_cpmcr4;
+	u_char	res4[2];
+	ushort	cp_rter;
+	u_char	res5[2];
+	ushort	cp_rtmr;
+	u_char	res6[0x14];
+
+	/* Baud rate generators.
+	*/
+	uint	cp_brgc1;
+	uint	cp_brgc2;
+	uint	cp_brgc3;
+	uint	cp_brgc4;
+
+	/* Serial Communication Channels.
+	*/
+	scc_t	cp_scc[4];
+
+	/* Serial Management Channels.
+	*/
+	smc_t	cp_smc[2];
+
+	/* Serial Peripheral Interface.
+	*/
+	ushort	cp_spmode;
+	u_char	res7[4];
+	u_char	cp_spie;
+	u_char	res8[3];
+	u_char	cp_spim;
+	u_char	res9[2];
+	u_char	cp_spcom;
+	u_char	res10[2];
+
+	/* Parallel Interface Port.
+	*/
+	u_char	res11[2];
+	ushort	cp_pipc;
+	u_char	res12[2];
+	ushort	cp_ptpr;
+	uint	cp_pbdir;
+	uint	cp_pbpar;
+	u_char	res13[2];
+	ushort	cp_pbodr;
+	uint	cp_pbdat;
+
+	/* Port E - MPC87x/88x only.
+	 */
+	uint	cp_pedir;
+	uint	cp_pepar;
+	uint	cp_peso;
+	uint	cp_peodr;
+	uint	cp_pedat;
+
+	/* Communications Processor Timing Register -
+	   Contains RMII Timing for the FECs on MPC87x/88x only.
+	*/
+	uint	cp_cptr;
+
+	/* Serial Interface and Time Slot Assignment.
+	*/
+	uint	cp_simode;
+	u_char	cp_sigmr;
+	u_char	res15;
+	u_char	cp_sistr;
+	u_char	cp_sicmr;
+	u_char	res16[4];
+	uint	cp_sicr;
+	uint	cp_sirp;
+	u_char	res17[0xc];
+
+	/* 256 bytes of MPC823 video controller RAM array.
+	*/
+	u_char	cp_vcram[0x100];
+	u_char	cp_siram[0x200];
+
+	/* The fast ethernet controller is not really part of the CPM,
+	 * but it resides in the address space.
+	 * The LCD color map is also here.
+	 */
+	union	fec_lcd	fl_un;
+#define cp_fec		fl_un.fl_un_fec
+#define lcd_cmap	fl_un.fl_un_cmap
+	char	res18[0xE00];
+
+	/* The DUET family has a second FEC here */
+	fec_t	cp_fec2;
+#define cp_fec1	cp_fec	/* consistency macro */
+
+	/* Dual Ported RAM follows.
+	 * There are many different formats for this memory area
+	 * depending upon the devices used and options chosen.
+	 * Some processors don't have all of it populated.
+	 */
+	u_char	cp_dpmem[0x1C00];	/* BD / Data / ucode */
+	u_char	cp_dparam[0x400];	/* Parameter RAM */
+} cpm8xx_t;
+
+/* Internal memory map.
+*/
+typedef struct immap {
+	sysconf8xx_t	im_siu_conf;	/* SIU Configuration */
+	pcmconf8xx_t	im_pcmcia;	/* PCMCIA Configuration */
+	memctl8xx_t	im_memctl;	/* Memory Controller */
+	sit8xx_t	im_sit;		/* System integration timers */
+	car8xx_t	im_clkrst;	/* Clocks and reset */
+	sitk8xx_t	im_sitk;	/* Sys int timer keys */
+	cark8xx_t	im_clkrstk;	/* Clocks and reset keys */
+	vid823_t	im_vid;		/* Video (823 only) */
+	lcd823_t	im_lcd;		/* LCD (823 only) */
+	i2c8xx_t	im_i2c;		/* I2C control/status */
+	sdma8xx_t	im_sdma;	/* SDMA control/status */
+	cpic8xx_t	im_cpic;	/* CPM Interrupt Controller */
+	iop8xx_t	im_ioport;	/* IO Port control/status */
+	cpmtimer8xx_t	im_cpmtimer;	/* CPM timers */
+	cpm8xx_t	im_cpm;		/* Communication processor */
+} immap_t;
+
+#endif /* __IMMAP_8XX__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/Kbuild b/arch/powerpc/include/asm/Kbuild
new file mode 100644
index 000000000000..5ab7d7fe198c
--- /dev/null
+++ b/arch/powerpc/include/asm/Kbuild
@@ -0,0 +1,37 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += auxvec.h
+header-y += ioctls.h
+header-y += sembuf.h
+header-y += siginfo.h
+header-y += stat.h
+header-y += errno.h
+header-y += ipcbuf.h
+header-y += msgbuf.h
+header-y += shmbuf.h
+header-y += socket.h
+header-y += termbits.h
+header-y += fcntl.h
+header-y += poll.h
+header-y += sockios.h
+header-y += ucontext.h
+header-y += ioctl.h
+header-y += linkage.h
+header-y += resource.h
+header-y += sigcontext.h
+header-y += statfs.h
+header-y += ps3fb.h
+
+unifdef-y += bootx.h
+unifdef-y += byteorder.h
+unifdef-y += cputable.h
+unifdef-y += elf.h
+unifdef-y += nvram.h
+unifdef-y += param.h
+unifdef-y += posix_types.h
+unifdef-y += seccomp.h
+unifdef-y += signal.h
+unifdef-y += spu_info.h
+unifdef-y += termios.h
+unifdef-y += types.h
+unifdef-y += unistd.h
diff --git a/arch/powerpc/include/asm/a.out.h b/arch/powerpc/include/asm/a.out.h
new file mode 100644
index 000000000000..89cead6b176e
--- /dev/null
+++ b/arch/powerpc/include/asm/a.out.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_POWERPC_A_OUT_H
+#define _ASM_POWERPC_A_OUT_H
+
+struct exec
+{
+	unsigned long a_info;	/* Use macros N_MAGIC, etc for access */
+	unsigned a_text;	/* length of text, in bytes */
+	unsigned a_data;	/* length of data, in bytes */
+	unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+	unsigned a_syms;	/* length of symbol table data in file, in bytes */
+	unsigned a_entry;	/* start address */
+	unsigned a_trsize;	/* length of relocation info for text, in bytes */
+	unsigned a_drsize;	/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+#endif /* _ASM_POWERPC_A_OUT_H */
diff --git a/arch/powerpc/include/asm/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h
new file mode 100644
index 000000000000..98324c5a8286
--- /dev/null
+++ b/arch/powerpc/include/asm/abs_addr.h
@@ -0,0 +1,75 @@
+#ifndef _ASM_POWERPC_ABS_ADDR_H
+#define _ASM_POWERPC_ABS_ADDR_H
+#ifdef __KERNEL__
+
+
+/*
+ * c 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/lmb.h>
+
+#include <asm/types.h>
+#include <asm/page.h>
+#include <asm/prom.h>
+#include <asm/firmware.h>
+
+struct mschunks_map {
+        unsigned long num_chunks;
+        unsigned long chunk_size;
+        unsigned long chunk_shift;
+        unsigned long chunk_mask;
+        u32 *mapping;
+};
+
+extern struct mschunks_map mschunks_map;
+
+/* Chunks are 256 KB */
+#define MSCHUNKS_CHUNK_SHIFT	(18)
+#define MSCHUNKS_CHUNK_SIZE	(1UL << MSCHUNKS_CHUNK_SHIFT)
+#define MSCHUNKS_OFFSET_MASK	(MSCHUNKS_CHUNK_SIZE - 1)
+
+static inline unsigned long chunk_to_addr(unsigned long chunk)
+{
+	return chunk << MSCHUNKS_CHUNK_SHIFT;
+}
+
+static inline unsigned long addr_to_chunk(unsigned long addr)
+{
+	return addr >> MSCHUNKS_CHUNK_SHIFT;
+}
+
+static inline unsigned long phys_to_abs(unsigned long pa)
+{
+	unsigned long chunk;
+
+	/* This is a no-op on non-iSeries */
+	if (!firmware_has_feature(FW_FEATURE_ISERIES))
+		return pa;
+
+	chunk = addr_to_chunk(pa);
+
+	if (chunk < mschunks_map.num_chunks)
+		chunk = mschunks_map.mapping[chunk];
+
+	return chunk_to_addr(chunk) + (pa & MSCHUNKS_OFFSET_MASK);
+}
+
+/* Convenience macros */
+#define virt_to_abs(va) phys_to_abs(__pa(va))
+#define abs_to_virt(aa) __va(aa)
+
+/*
+ * Converts Virtual Address to Real Address for
+ * Legacy iSeries Hypervisor calls
+ */
+#define iseries_hv_addr(virtaddr)	\
+	(0x8000000000000000 | virt_to_abs(virtaddr))
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_ABS_ADDR_H */
diff --git a/arch/powerpc/include/asm/agp.h b/arch/powerpc/include/asm/agp.h
new file mode 100644
index 000000000000..86455c4c31ee
--- /dev/null
+++ b/arch/powerpc/include/asm/agp.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_POWERPC_AGP_H
+#define _ASM_POWERPC_AGP_H
+#ifdef __KERNEL__
+
+#include <asm/io.h>
+
+#define map_page_into_agp(page)
+#define unmap_page_from_agp(page)
+#define flush_agp_cache() mb()
+
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order)		\
+	((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order)	\
+	free_pages((unsigned long)(table), (order))
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_AGP_H */
diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h
new file mode 100644
index 000000000000..8f0fe7971949
--- /dev/null
+++ b/arch/powerpc/include/asm/asm-compat.h
@@ -0,0 +1,69 @@
+#ifndef _ASM_POWERPC_ASM_COMPAT_H
+#define _ASM_POWERPC_ASM_COMPAT_H
+
+#include <asm/types.h>
+
+#ifdef __ASSEMBLY__
+#  define stringify_in_c(...)	__VA_ARGS__
+#  define ASM_CONST(x)		x
+#else
+/* This version of stringify will deal with commas... */
+#  define __stringify_in_c(...)	#__VA_ARGS__
+#  define stringify_in_c(...)	__stringify_in_c(__VA_ARGS__) " "
+#  define __ASM_CONST(x)	x##UL
+#  define ASM_CONST(x)		__ASM_CONST(x)
+#endif
+
+
+#ifdef __powerpc64__
+
+/* operations for longs and pointers */
+#define PPC_LL		stringify_in_c(ld)
+#define PPC_STL		stringify_in_c(std)
+#define PPC_LCMPI	stringify_in_c(cmpdi)
+#define PPC_LONG	stringify_in_c(.llong)
+#define PPC_LONG_ALIGN	stringify_in_c(.balign 8)
+#define PPC_TLNEI	stringify_in_c(tdnei)
+#define PPC_LLARX	stringify_in_c(ldarx)
+#define PPC_STLCX	stringify_in_c(stdcx.)
+#define PPC_CNTLZL	stringify_in_c(cntlzd)
+
+/* Move to CR, single-entry optimized version. Only available
+ * on POWER4 and later.
+ */
+#ifdef CONFIG_POWER4_ONLY
+#define PPC_MTOCRF	stringify_in_c(mtocrf)
+#else
+#define PPC_MTOCRF	stringify_in_c(mtcrf)
+#endif
+
+#else /* 32-bit */
+
+/* operations for longs and pointers */
+#define PPC_LL		stringify_in_c(lwz)
+#define PPC_STL		stringify_in_c(stw)
+#define PPC_LCMPI	stringify_in_c(cmpwi)
+#define PPC_LONG	stringify_in_c(.long)
+#define PPC_LONG_ALIGN	stringify_in_c(.balign 4)
+#define PPC_TLNEI	stringify_in_c(twnei)
+#define PPC_LLARX	stringify_in_c(lwarx)
+#define PPC_STLCX	stringify_in_c(stwcx.)
+#define PPC_CNTLZL	stringify_in_c(cntlzw)
+#define PPC_MTOCRF	stringify_in_c(mtcrf)
+
+#endif
+
+#ifdef __KERNEL__
+#ifdef CONFIG_IBM405_ERR77
+/* Erratum #77 on the 405 means we need a sync or dcbt before every
+ * stwcx.  The old ATOMIC_SYNC_FIX covered some but not all of this.
+ */
+#define PPC405_ERR77(ra,rb)	stringify_in_c(dcbt	ra, rb;)
+#define	PPC405_ERR77_SYNC	stringify_in_c(sync;)
+#else
+#define PPC405_ERR77(ra,rb)
+#define PPC405_ERR77_SYNC
+#endif
+#endif
+
+#endif /* _ASM_POWERPC_ASM_COMPAT_H */
diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h
new file mode 100644
index 000000000000..f3fc733758f5
--- /dev/null
+++ b/arch/powerpc/include/asm/atomic.h
@@ -0,0 +1,479 @@
+#ifndef _ASM_POWERPC_ATOMIC_H_
+#define _ASM_POWERPC_ATOMIC_H_
+
+/*
+ * PowerPC atomic operations
+ */
+
+typedef struct { int counter; } atomic_t;
+
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+#include <asm/synch.h>
+#include <asm/asm-compat.h>
+#include <asm/system.h>
+
+#define ATOMIC_INIT(i)		{ (i) }
+
+static __inline__ int atomic_read(const atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__("lwz%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter));
+
+	return t;
+}
+
+static __inline__ void atomic_set(atomic_t *v, int i)
+{
+	__asm__ __volatile__("stw%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i));
+}
+
+static __inline__ void atomic_add(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%3		# atomic_add\n\
+	add	%0,%2,%0\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%0,0,%3 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (a), "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_add_return(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%2		# atomic_add_return\n\
+	add	%0,%1,%0\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%0,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (a), "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+static __inline__ void atomic_sub(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%3		# atomic_sub\n\
+	subf	%0,%2,%0\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%0,0,%3 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (a), "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_sub_return(int a, atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%2		# atomic_sub_return\n\
+	subf	%0,%1,%0\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%0,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (a), "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+static __inline__ void atomic_inc(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%2		# atomic_inc\n\
+	addic	%0,%0,1\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%0,0,%2 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_inc_return(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%1		# atomic_inc_return\n\
+	addic	%0,%0,1\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%0,0,%1 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+static __inline__ void atomic_dec(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%2		# atomic_dec\n\
+	addic	%0,%0,-1\n"
+	PPC405_ERR77(0,%2)\
+"	stwcx.	%0,0,%2\n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ int atomic_dec_return(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%1		# atomic_dec_return\n\
+	addic	%0,%0,-1\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%0,0,%1\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+/**
+ * atomic_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int t;
+
+	__asm__ __volatile__ (
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%1		# atomic_add_unless\n\
+	cmpw	0,%0,%3 \n\
+	beq-	2f \n\
+	add	%0,%2,%0 \n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%0,0,%1 \n\
+	bne-	1b \n"
+	ISYNC_ON_SMP
+"	subf	%0,%2,%0 \n\
+2:"
+	: "=&r" (t)
+	: "r" (&v->counter), "r" (a), "r" (u)
+	: "cc", "memory");
+
+	return t != u;
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_sub_and_test(a, v)	(atomic_sub_return((a), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_dec_return((v)) == 0)
+
+/*
+ * Atomically test *v and decrement if it is greater than 0.
+ * The function returns the old value of *v minus 1, even if
+ * the atomic variable, v, was not decremented.
+ */
+static __inline__ int atomic_dec_if_positive(atomic_t *v)
+{
+	int t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%1		# atomic_dec_if_positive\n\
+	cmpwi	%0,1\n\
+	addi	%0,%0,-1\n\
+	blt-	2f\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.	%0,0,%1\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	"\n\
+2:"	: "=&b" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define smp_mb__before_atomic_dec()     smp_mb()
+#define smp_mb__after_atomic_dec()      smp_mb()
+#define smp_mb__before_atomic_inc()     smp_mb()
+#define smp_mb__after_atomic_inc()      smp_mb()
+
+#ifdef __powerpc64__
+
+typedef struct { long counter; } atomic64_t;
+
+#define ATOMIC64_INIT(i)	{ (i) }
+
+static __inline__ long atomic64_read(const atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__("ld%U1%X1 %0,%1" : "=r"(t) : "m"(v->counter));
+
+	return t;
+}
+
+static __inline__ void atomic64_set(atomic64_t *v, long i)
+{
+	__asm__ __volatile__("std%U0%X0 %1,%0" : "=m"(v->counter) : "r"(i));
+}
+
+static __inline__ void atomic64_add(long a, atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%3		# atomic64_add\n\
+	add	%0,%2,%0\n\
+	stdcx.	%0,0,%3 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (a), "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ long atomic64_add_return(long a, atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%2		# atomic64_add_return\n\
+	add	%0,%1,%0\n\
+	stdcx.	%0,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (a), "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic64_add_negative(a, v)	(atomic64_add_return((a), (v)) < 0)
+
+static __inline__ void atomic64_sub(long a, atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%3		# atomic64_sub\n\
+	subf	%0,%2,%0\n\
+	stdcx.	%0,0,%3 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (a), "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ long atomic64_sub_return(long a, atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%2		# atomic64_sub_return\n\
+	subf	%0,%1,%0\n\
+	stdcx.	%0,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (a), "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+static __inline__ void atomic64_inc(atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%2		# atomic64_inc\n\
+	addic	%0,%0,1\n\
+	stdcx.	%0,0,%2 \n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ long atomic64_inc_return(atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%1		# atomic64_inc_return\n\
+	addic	%0,%0,1\n\
+	stdcx.	%0,0,%1 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+/*
+ * atomic64_inc_and_test - increment and test
+ * @v: pointer of type atomic64_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
+
+static __inline__ void atomic64_dec(atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%2		# atomic64_dec\n\
+	addic	%0,%0,-1\n\
+	stdcx.	%0,0,%2\n\
+	bne-	1b"
+	: "=&r" (t), "+m" (v->counter)
+	: "r" (&v->counter)
+	: "cc");
+}
+
+static __inline__ long atomic64_dec_return(atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%1		# atomic64_dec_return\n\
+	addic	%0,%0,-1\n\
+	stdcx.	%0,0,%1\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic64_sub_and_test(a, v)	(atomic64_sub_return((a), (v)) == 0)
+#define atomic64_dec_and_test(v)	(atomic64_dec_return((v)) == 0)
+
+/*
+ * Atomically test *v and decrement if it is greater than 0.
+ * The function returns the old value of *v minus 1.
+ */
+static __inline__ long atomic64_dec_if_positive(atomic64_t *v)
+{
+	long t;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%1		# atomic64_dec_if_positive\n\
+	addic.	%0,%0,-1\n\
+	blt-	2f\n\
+	stdcx.	%0,0,%1\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	"\n\
+2:"	: "=&r" (t)
+	: "r" (&v->counter)
+	: "cc", "memory");
+
+	return t;
+}
+
+#define atomic64_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+
+/**
+ * atomic64_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, so long as it was not @u.
+ * Returns non-zero if @v was not @u, and zero otherwise.
+ */
+static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+	long t;
+
+	__asm__ __volatile__ (
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%1		# atomic_add_unless\n\
+	cmpd	0,%0,%3 \n\
+	beq-	2f \n\
+	add	%0,%2,%0 \n"
+"	stdcx.	%0,0,%1 \n\
+	bne-	1b \n"
+	ISYNC_ON_SMP
+"	subf	%0,%2,%0 \n\
+2:"
+	: "=&r" (t)
+	: "r" (&v->counter), "r" (a), "r" (u)
+	: "cc", "memory");
+
+	return t != u;
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+#endif /* __powerpc64__ */
+
+#include <asm-generic/atomic.h>
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_ATOMIC_H_ */
diff --git a/arch/powerpc/include/asm/auxvec.h b/arch/powerpc/include/asm/auxvec.h
new file mode 100644
index 000000000000..19a099b62cd6
--- /dev/null
+++ b/arch/powerpc/include/asm/auxvec.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_POWERPC_AUXVEC_H
+#define _ASM_POWERPC_AUXVEC_H
+
+/*
+ * We need to put in some extra aux table entries to tell glibc what
+ * the cache block size is, so it can use the dcbz instruction safely.
+ */
+#define AT_DCACHEBSIZE		19
+#define AT_ICACHEBSIZE		20
+#define AT_UCACHEBSIZE		21
+/* A special ignored type value for PPC, for glibc compatibility.  */
+#define AT_IGNOREPPC		22
+
+/* The vDSO location. We have to use the same value as x86 for glibc's
+ * sake :-)
+ */
+#define AT_SYSINFO_EHDR		33
+
+#endif
diff --git a/arch/powerpc/include/asm/backlight.h b/arch/powerpc/include/asm/backlight.h
new file mode 100644
index 000000000000..8cf5c37c3817
--- /dev/null
+++ b/arch/powerpc/include/asm/backlight.h
@@ -0,0 +1,41 @@
+/*
+ * Routines for handling backlight control on PowerBooks
+ *
+ * For now, implementation resides in
+ * arch/powerpc/platforms/powermac/backlight.c
+ *
+ */
+#ifndef __ASM_POWERPC_BACKLIGHT_H
+#define __ASM_POWERPC_BACKLIGHT_H
+#ifdef __KERNEL__
+
+#include <linux/fb.h>
+#include <linux/mutex.h>
+
+/* For locking instructions, see the implementation file */
+extern struct backlight_device *pmac_backlight;
+extern struct mutex pmac_backlight_mutex;
+
+extern int pmac_backlight_curve_lookup(struct fb_info *info, int value);
+
+extern int pmac_has_backlight_type(const char *type);
+
+extern void pmac_backlight_key(int direction);
+static inline void pmac_backlight_key_up(void)
+{
+	pmac_backlight_key(0);
+}
+static inline void pmac_backlight_key_down(void)
+{
+	pmac_backlight_key(1);
+}
+
+extern void pmac_backlight_set_legacy_brightness_pmu(int brightness);
+extern int pmac_backlight_set_legacy_brightness(int brightness);
+extern int pmac_backlight_get_legacy_brightness(void);
+
+extern void pmac_backlight_enable(void);
+extern void pmac_backlight_disable(void);
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h
new file mode 100644
index 000000000000..897eade3afbe
--- /dev/null
+++ b/arch/powerpc/include/asm/bitops.h
@@ -0,0 +1,410 @@
+/*
+ * PowerPC atomic bit operations.
+ *
+ * Merged version by David Gibson <david@gibson.dropbear.id.au>.
+ * Based on ppc64 versions by: Dave Engebretsen, Todd Inglett, Don
+ * Reed, Pat McCarthy, Peter Bergner, Anton Blanchard.  They
+ * originally took it from the ppc32 code.
+ *
+ * Within a word, bits are numbered LSB first.  Lot's of places make
+ * this assumption by directly testing bits with (val & (1<<nr)).
+ * This can cause confusion for large (> 1 word) bitmaps on a
+ * big-endian system because, unlike little endian, the number of each
+ * bit depends on the word size.
+ *
+ * The bitop functions are defined to work on unsigned longs, so for a
+ * ppc64 system the bits end up numbered:
+ *   |63..............0|127............64|191...........128|255...........196|
+ * and on ppc32:
+ *   |31.....0|63....31|95....64|127...96|159..128|191..160|223..192|255..224|
+ *
+ * There are a few little-endian macros used mostly for filesystem
+ * bitmaps, these work on similar bit arrays layouts, but
+ * byte-oriented:
+ *   |7...0|15...8|23...16|31...24|39...32|47...40|55...48|63...56|
+ *
+ * The main difference is that bit 3-5 (64b) or 3-4 (32b) in the bit
+ * number field needs to be reversed compared to the big-endian bit
+ * fields. This can be achieved by XOR with 0x38 (64b) or 0x18 (32b).
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_BITOPS_H
+#define _ASM_POWERPC_BITOPS_H
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <asm/asm-compat.h>
+#include <asm/synch.h>
+
+/*
+ * clear_bit doesn't imply a memory barrier
+ */
+#define smp_mb__before_clear_bit()	smp_mb()
+#define smp_mb__after_clear_bit()	smp_mb()
+
+#define BITOP_MASK(nr)		(1UL << ((nr) % BITS_PER_LONG))
+#define BITOP_WORD(nr)		((nr) / BITS_PER_LONG)
+#define BITOP_LE_SWIZZLE	((BITS_PER_LONG-1) & ~0x7)
+
+static __inline__ void set_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX "%0,0,%3	# set_bit\n"
+	"or	%0,%0,%2\n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%0,0,%3\n"
+	"bne-	1b"
+	: "=&r" (old), "+m" (*p)
+	: "r" (mask), "r" (p)
+	: "cc" );
+}
+
+static __inline__ void clear_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX "%0,0,%3	# clear_bit\n"
+	"andc	%0,%0,%2\n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%0,0,%3\n"
+	"bne-	1b"
+	: "=&r" (old), "+m" (*p)
+	: "r" (mask), "r" (p)
+	: "cc" );
+}
+
+static __inline__ void clear_bit_unlock(int nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:"	PPC_LLARX "%0,0,%3	# clear_bit_unlock\n"
+	"andc	%0,%0,%2\n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%0,0,%3\n"
+	"bne-	1b"
+	: "=&r" (old), "+m" (*p)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+}
+
+static __inline__ void change_bit(int nr, volatile unsigned long *addr)
+{
+	unsigned long old;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX "%0,0,%3	# change_bit\n"
+	"xor	%0,%0,%2\n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%0,0,%3\n"
+	"bne-	1b"
+	: "=&r" (old), "+m" (*p)
+	: "r" (mask), "r" (p)
+	: "cc" );
+}
+
+static __inline__ int test_and_set_bit(unsigned long nr,
+				       volatile unsigned long *addr)
+{
+	unsigned long old, t;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:"	PPC_LLARX "%0,0,%3		# test_and_set_bit\n"
+	"or	%1,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%1,0,%3 \n"
+	"bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (old), "=&r" (t)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+static __inline__ int test_and_set_bit_lock(unsigned long nr,
+				       volatile unsigned long *addr)
+{
+	unsigned long old, t;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX "%0,0,%3		# test_and_set_bit_lock\n"
+	"or	%1,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%1,0,%3 \n"
+	"bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (old), "=&r" (t)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+static __inline__ int test_and_clear_bit(unsigned long nr,
+					 volatile unsigned long *addr)
+{
+	unsigned long old, t;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:"	PPC_LLARX "%0,0,%3		# test_and_clear_bit\n"
+	"andc	%1,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%1,0,%3 \n"
+	"bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (old), "=&r" (t)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+static __inline__ int test_and_change_bit(unsigned long nr,
+					  volatile unsigned long *addr)
+{
+	unsigned long old, t;
+	unsigned long mask = BITOP_MASK(nr);
+	unsigned long *p = ((unsigned long *)addr) + BITOP_WORD(nr);
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:"	PPC_LLARX "%0,0,%3		# test_and_change_bit\n"
+	"xor	%1,%0,%2 \n"
+	PPC405_ERR77(0,%3)
+	PPC_STLCX "%1,0,%3 \n"
+	"bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (old), "=&r" (t)
+	: "r" (mask), "r" (p)
+	: "cc", "memory");
+
+	return (old & mask) != 0;
+}
+
+static __inline__ void set_bits(unsigned long mask, unsigned long *addr)
+{
+        unsigned long old;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX "%0,0,%3         # set_bits\n"
+	"or	%0,%0,%2\n"
+	PPC_STLCX "%0,0,%3\n"
+	"bne-	1b"
+	: "=&r" (old), "+m" (*addr)
+	: "r" (mask), "r" (addr)
+	: "cc");
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+static __inline__ void __clear_bit_unlock(int nr, volatile unsigned long *addr)
+{
+	__asm__ __volatile__(LWSYNC_ON_SMP "" ::: "memory");
+	__clear_bit(nr, addr);
+}
+
+/*
+ * Return the zero-based bit position (LE, not IBM bit numbering) of
+ * the most significant 1-bit in a double word.
+ */
+static __inline__ __attribute__((const))
+int __ilog2(unsigned long x)
+{
+	int lz;
+
+	asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (x));
+	return BITS_PER_LONG - 1 - lz;
+}
+
+static inline __attribute__((const))
+int __ilog2_u32(u32 n)
+{
+	int bit;
+	asm ("cntlzw %0,%1" : "=r" (bit) : "r" (n));
+	return 31 - bit;
+}
+
+#ifdef __powerpc64__
+static inline __attribute__((const))
+int __ilog2_u64(u64 n)
+{
+	int bit;
+	asm ("cntlzd %0,%1" : "=r" (bit) : "r" (n));
+	return 63 - bit;
+}
+#endif
+
+/*
+ * Determines the bit position of the least significant 0 bit in the
+ * specified double word. The returned bit position will be
+ * zero-based, starting from the right side (63/31 - 0).
+ */
+static __inline__ unsigned long ffz(unsigned long x)
+{
+	/* no zero exists anywhere in the 8 byte area. */
+	if ((x = ~x) == 0)
+		return BITS_PER_LONG;
+
+	/*
+	 * Calculate the bit position of the least signficant '1' bit in x
+	 * (since x has been changed this will actually be the least signficant
+	 * '0' bit in * the original x).  Note: (x & -x) gives us a mask that
+	 * is the least significant * (RIGHT-most) 1-bit of the value in x.
+	 */
+	return __ilog2(x & -x);
+}
+
+static __inline__ int __ffs(unsigned long x)
+{
+	return __ilog2(x & -x);
+}
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static __inline__ int ffs(int x)
+{
+	unsigned long i = (unsigned long)x;
+	return __ilog2(i & -i) + 1;
+}
+
+/*
+ * fls: find last (most-significant) bit set.
+ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
+ */
+static __inline__ int fls(unsigned int x)
+{
+	int lz;
+
+	asm ("cntlzw %0,%1" : "=r" (lz) : "r" (x));
+	return 32 - lz;
+}
+
+static __inline__ unsigned long __fls(unsigned long x)
+{
+	return __ilog2(x);
+}
+
+/*
+ * 64-bit can do this using one cntlzd (count leading zeroes doubleword)
+ * instruction; for 32-bit we use the generic version, which does two
+ * 32-bit fls calls.
+ */
+#ifdef __powerpc64__
+static __inline__ int fls64(__u64 x)
+{
+	int lz;
+
+	asm ("cntlzd %0,%1" : "=r" (lz) : "r" (x));
+	return 64 - lz;
+}
+#else
+#include <asm-generic/bitops/fls64.h>
+#endif /* __powerpc64__ */
+
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/find.h>
+
+/* Little-endian versions */
+
+static __inline__ int test_le_bit(unsigned long nr,
+				  __const__ unsigned long *addr)
+{
+	__const__ unsigned char	*tmp = (__const__ unsigned char *) addr;
+	return (tmp[nr >> 3] >> (nr & 7)) & 1;
+}
+
+#define __set_le_bit(nr, addr) \
+	__set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+#define __clear_le_bit(nr, addr) \
+	__clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+
+#define test_and_set_le_bit(nr, addr) \
+	test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+#define test_and_clear_le_bit(nr, addr) \
+	test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+
+#define __test_and_set_le_bit(nr, addr) \
+	__test_and_set_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+#define __test_and_clear_le_bit(nr, addr) \
+	__test_and_clear_bit((nr) ^ BITOP_LE_SWIZZLE, (addr))
+
+#define find_first_zero_le_bit(addr, size) generic_find_next_zero_le_bit((addr), (size), 0)
+unsigned long generic_find_next_zero_le_bit(const unsigned long *addr,
+				    unsigned long size, unsigned long offset);
+
+unsigned long generic_find_next_le_bit(const unsigned long *addr,
+				    unsigned long size, unsigned long offset);
+/* Bitmap functions for the ext2 filesystem */
+
+#define ext2_set_bit(nr,addr) \
+	__test_and_set_le_bit((nr), (unsigned long*)addr)
+#define ext2_clear_bit(nr, addr) \
+	__test_and_clear_le_bit((nr), (unsigned long*)addr)
+
+#define ext2_set_bit_atomic(lock, nr, addr) \
+	test_and_set_le_bit((nr), (unsigned long*)addr)
+#define ext2_clear_bit_atomic(lock, nr, addr) \
+	test_and_clear_le_bit((nr), (unsigned long*)addr)
+
+#define ext2_test_bit(nr, addr)      test_le_bit((nr),(unsigned long*)addr)
+
+#define ext2_find_first_zero_bit(addr, size) \
+	find_first_zero_le_bit((unsigned long*)addr, size)
+#define ext2_find_next_zero_bit(addr, size, off) \
+	generic_find_next_zero_le_bit((unsigned long*)addr, size, off)
+
+#define ext2_find_next_bit(addr, size, off) \
+	generic_find_next_le_bit((unsigned long *)addr, size, off)
+/* Bitmap functions for the minix filesystem.  */
+
+#define minix_test_and_set_bit(nr,addr) \
+	__test_and_set_le_bit(nr, (unsigned long *)addr)
+#define minix_set_bit(nr,addr) \
+	__set_le_bit(nr, (unsigned long *)addr)
+#define minix_test_and_clear_bit(nr,addr) \
+	__test_and_clear_le_bit(nr, (unsigned long *)addr)
+#define minix_test_bit(nr,addr) \
+	test_le_bit(nr, (unsigned long *)addr)
+
+#define minix_find_first_zero_bit(addr,size) \
+	find_first_zero_le_bit((unsigned long *)addr, size)
+
+#include <asm-generic/bitops/sched.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_BITOPS_H */
diff --git a/arch/powerpc/include/asm/bootx.h b/arch/powerpc/include/asm/bootx.h
new file mode 100644
index 000000000000..57b82e3f89ce
--- /dev/null
+++ b/arch/powerpc/include/asm/bootx.h
@@ -0,0 +1,171 @@
+/*
+ * This file describes the structure passed from the BootX application
+ * (for MacOS) when it is used to boot Linux.
+ *
+ * Written by Benjamin Herrenschmidt.
+ */
+
+
+#ifndef __ASM_BOOTX_H__
+#define __ASM_BOOTX_H__
+
+#include <asm/types.h>
+
+#ifdef macintosh
+#include <Types.h>
+#include "linux_type_defs.h"
+#endif
+
+#ifdef macintosh
+/* All this requires PowerPC alignment */
+#pragma options align=power
+#endif
+
+/* On kernel entry:
+ *
+ * r3 = 0x426f6f58    ('BooX')
+ * r4 = pointer to boot_infos
+ * r5 = NULL
+ *
+ * Data and instruction translation disabled, interrupts
+ * disabled, kernel loaded at physical 0x00000000 on PCI
+ * machines (will be different on NuBus).
+ */
+
+#define BOOT_INFO_VERSION               5
+#define BOOT_INFO_COMPATIBLE_VERSION    1
+
+/* Bit in the architecture flag mask. More to be defined in
+   future versions. Note that either BOOT_ARCH_PCI or
+   BOOT_ARCH_NUBUS is set. The other BOOT_ARCH_NUBUS_xxx are
+   set additionally when BOOT_ARCH_NUBUS is set.
+ */
+#define BOOT_ARCH_PCI                   0x00000001UL
+#define BOOT_ARCH_NUBUS                 0x00000002UL
+#define BOOT_ARCH_NUBUS_PDM             0x00000010UL
+#define BOOT_ARCH_NUBUS_PERFORMA        0x00000020UL
+#define BOOT_ARCH_NUBUS_POWERBOOK       0x00000040UL
+
+/*  Maximum number of ranges in phys memory map */
+#define MAX_MEM_MAP_SIZE				26
+
+/* This is the format of an element in the physical memory map. Note that
+   the map is optional and current BootX will only build it for pre-PCI
+   machines */
+typedef struct boot_info_map_entry
+{
+    __u32       physAddr;                /* Physical starting address */
+    __u32       size;                    /* Size in bytes */
+} boot_info_map_entry_t;
+
+
+/* Here are the boot informations that are passed to the bootstrap
+ * Note that the kernel arguments and the device tree are appended
+ * at the end of this structure. */
+typedef struct boot_infos
+{
+    /* Version of this structure */
+    __u32       version;
+    /* backward compatible down to version: */
+    __u32       compatible_version;
+
+    /* NEW (vers. 2) this holds the current _logical_ base addr of
+       the frame buffer (for use by early boot message) */
+    __u8*       logicalDisplayBase;
+
+    /* NEW (vers. 4) Apple's machine identification */
+    __u32       machineID;
+
+    /* NEW (vers. 4) Detected hw architecture */
+    __u32       architecture;
+
+    /* The device tree (internal addresses relative to the beginning of the tree,
+     * device tree offset relative to the beginning of this structure).
+     * On pre-PCI macintosh (BOOT_ARCH_PCI bit set to 0 in architecture), this
+     * field is 0.
+     */
+    __u32       deviceTreeOffset;        /* Device tree offset */
+    __u32       deviceTreeSize;          /* Size of the device tree */
+
+    /* Some infos about the current MacOS display */
+    __u32       dispDeviceRect[4];       /* left,top,right,bottom */
+    __u32       dispDeviceDepth;         /* (8, 16 or 32) */
+    __u8*       dispDeviceBase;          /* base address (physical) */
+    __u32       dispDeviceRowBytes;      /* rowbytes (in bytes) */
+    __u32       dispDeviceColorsOffset;  /* Colormap (8 bits only) or 0 (*) */
+    /* Optional offset in the registry to the current
+     * MacOS display. (Can be 0 when not detected) */
+     __u32      dispDeviceRegEntryOffset;
+
+    /* Optional pointer to boot ramdisk (offset from this structure) */
+    __u32       ramDisk;
+    __u32       ramDiskSize;             /* size of ramdisk image */
+
+    /* Kernel command line arguments (offset from this structure) */
+    __u32       kernelParamsOffset;
+
+    /* ALL BELOW NEW (vers. 4) */
+
+    /* This defines the physical memory. Valid with BOOT_ARCH_NUBUS flag
+       (non-PCI) only. On PCI, memory is contiguous and it's size is in the
+       device-tree. */
+    boot_info_map_entry_t
+    	        physMemoryMap[MAX_MEM_MAP_SIZE]; /* Where the phys memory is */
+    __u32       physMemoryMapSize;               /* How many entries in map */
+
+
+    /* The framebuffer size (optional, currently 0) */
+    __u32       frameBufferSize;         /* Represents a max size, can be 0. */
+
+    /* NEW (vers. 5) */
+
+    /* Total params size (args + colormap + device tree + ramdisk) */
+    __u32       totalParamsSize;
+
+} boot_infos_t;
+
+#ifdef __KERNEL__
+/* (*) The format of the colormap is 256 * 3 * 2 bytes. Each color index
+ * is represented by 3 short words containing a 16 bits (unsigned) color
+ * component. Later versions may contain the gamma table for direct-color
+ * devices here.
+ */
+#define BOOTX_COLORTABLE_SIZE    (256UL*3UL*2UL)
+
+/* BootX passes the device-tree using a format that comes from earlier
+ * ppc32 kernels. This used to match what is in prom.h, but not anymore
+ * so we now define it here
+ */
+struct bootx_dt_prop {
+	u32	name;
+	int	length;
+	u32	value;
+	u32	next;
+};
+
+struct bootx_dt_node {
+	u32	unused0;
+	u32	unused1;
+	u32	phandle;	/* not really available */
+	u32	unused2;
+	u32	unused3;
+	u32	unused4;
+	u32	unused5;
+	u32	full_name;
+	u32	properties;
+	u32	parent;
+	u32	child;
+	u32	sibling;
+	u32	next;
+	u32	allnext;
+};
+
+extern void bootx_init(unsigned long r4, unsigned long phys);
+
+#endif /* __KERNEL__ */
+
+#ifdef macintosh
+#pragma options align=reset
+#endif
+
+#endif
diff --git a/arch/powerpc/include/asm/btext.h b/arch/powerpc/include/asm/btext.h
new file mode 100644
index 000000000000..906f46e31006
--- /dev/null
+++ b/arch/powerpc/include/asm/btext.h
@@ -0,0 +1,28 @@
+/*
+ * Definitions for using the procedures in btext.c.
+ *
+ * Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ */
+#ifndef __PPC_BTEXT_H
+#define __PPC_BTEXT_H
+#ifdef __KERNEL__
+
+extern int btext_find_display(int allow_nonstdout);
+extern void btext_update_display(unsigned long phys, int width, int height,
+				 int depth, int pitch);
+extern void btext_setup_display(int width, int height, int depth, int pitch,
+				unsigned long address);
+extern void btext_prepare_BAT(void);
+extern void btext_unmap(void);
+
+extern void btext_drawchar(char c);
+extern void btext_drawstring(const char *str);
+extern void btext_drawhex(unsigned long v);
+extern void btext_drawtext(const char *c, unsigned int len);
+
+extern void btext_clearscreen(void);
+extern void btext_flushscreen(void);
+extern void btext_flushline(void);
+
+#endif /* __KERNEL__ */
+#endif /* __PPC_BTEXT_H */
diff --git a/arch/powerpc/include/asm/bug.h b/arch/powerpc/include/asm/bug.h
new file mode 100644
index 000000000000..e55d1f66b86f
--- /dev/null
+++ b/arch/powerpc/include/asm/bug.h
@@ -0,0 +1,121 @@
+#ifndef _ASM_POWERPC_BUG_H
+#define _ASM_POWERPC_BUG_H
+#ifdef __KERNEL__
+
+#include <asm/asm-compat.h>
+/*
+ * Define an illegal instr to trap on the bug.
+ * We don't use 0 because that marks the end of a function
+ * in the ELF ABI.  That's "Boo Boo" in case you wonder...
+ */
+#define BUG_OPCODE .long 0x00b00b00  /* For asm */
+#define BUG_ILLEGAL_INSTR "0x00b00b00" /* For BUG macro */
+
+#ifdef CONFIG_BUG
+
+#ifdef __ASSEMBLY__
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+.macro EMIT_BUG_ENTRY addr,file,line,flags
+	 .section __bug_table,"a"
+5001:	 PPC_LONG \addr, 5002f
+	 .short \line, \flags
+	 .org 5001b+BUG_ENTRY_SIZE
+	 .previous
+	 .section .rodata,"a"
+5002:	 .asciz "\file"
+	 .previous
+.endm
+#else
+ .macro EMIT_BUG_ENTRY addr,file,line,flags
+	 .section __bug_table,"a"
+5001:	 PPC_LONG \addr
+	 .short \flags
+	 .org 5001b+BUG_ENTRY_SIZE
+	 .previous
+.endm
+#endif /* verbose */
+
+#else /* !__ASSEMBLY__ */
+/* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and
+   sizeof(struct bug_entry), respectively */
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#define _EMIT_BUG_ENTRY				\
+	".section __bug_table,\"a\"\n"		\
+	"2:\t" PPC_LONG "1b, %0\n"		\
+	"\t.short %1, %2\n"			\
+	".org 2b+%3\n"				\
+	".previous\n"
+#else
+#define _EMIT_BUG_ENTRY				\
+	".section __bug_table,\"a\"\n"		\
+	"2:\t" PPC_LONG "1b\n"			\
+	"\t.short %2\n"				\
+	".org 2b+%3\n"				\
+	".previous\n"
+#endif
+
+/*
+ * BUG_ON() and WARN_ON() do their best to cooperate with compile-time
+ * optimisations. However depending on the complexity of the condition
+ * some compiler versions may not produce optimal results.
+ */
+
+#define BUG() do {						\
+	__asm__ __volatile__(					\
+		"1:	twi 31,0,0\n"				\
+		_EMIT_BUG_ENTRY					\
+		: : "i" (__FILE__), "i" (__LINE__),		\
+		    "i" (0), "i"  (sizeof(struct bug_entry)));	\
+	for(;;) ;						\
+} while (0)
+
+#define BUG_ON(x) do {						\
+	if (__builtin_constant_p(x)) {				\
+		if (x)						\
+			BUG();					\
+	} else {						\
+		__asm__ __volatile__(				\
+		"1:	"PPC_TLNEI"	%4,0\n"			\
+		_EMIT_BUG_ENTRY					\
+		: : "i" (__FILE__), "i" (__LINE__), "i" (0),	\
+		  "i" (sizeof(struct bug_entry)),		\
+		  "r" ((__force long)(x)));			\
+	}							\
+} while (0)
+
+#define __WARN() do {						\
+	__asm__ __volatile__(					\
+		"1:	twi 31,0,0\n"				\
+		_EMIT_BUG_ENTRY					\
+		: : "i" (__FILE__), "i" (__LINE__),		\
+		  "i" (BUGFLAG_WARNING),			\
+		  "i" (sizeof(struct bug_entry)));		\
+} while (0)
+
+#define WARN_ON(x) ({						\
+	int __ret_warn_on = !!(x);				\
+	if (__builtin_constant_p(__ret_warn_on)) {		\
+		if (__ret_warn_on)				\
+			__WARN();				\
+	} else {						\
+		__asm__ __volatile__(				\
+		"1:	"PPC_TLNEI"	%4,0\n"			\
+		_EMIT_BUG_ENTRY					\
+		: : "i" (__FILE__), "i" (__LINE__),		\
+		  "i" (BUGFLAG_WARNING),			\
+		  "i" (sizeof(struct bug_entry)),		\
+		  "r" (__ret_warn_on));				\
+	}							\
+	unlikely(__ret_warn_on);				\
+})
+
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_BUG_ON
+#define HAVE_ARCH_WARN_ON
+#endif /* __ASSEMBLY __ */
+#endif /* CONFIG_BUG */
+
+#include <asm-generic/bug.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_BUG_H */
diff --git a/arch/powerpc/include/asm/bugs.h b/arch/powerpc/include/asm/bugs.h
new file mode 100644
index 000000000000..42fdb73e3068
--- /dev/null
+++ b/arch/powerpc/include/asm/bugs.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_POWERPC_BUGS_H
+#define _ASM_POWERPC_BUGS_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * This file is included by 'init/main.c' to check for
+ * architecture-dependent bugs.
+ */
+
+static inline void check_bugs(void) { }
+
+#endif	/* _ASM_POWERPC_BUGS_H */
diff --git a/arch/powerpc/include/asm/byteorder.h b/arch/powerpc/include/asm/byteorder.h
new file mode 100644
index 000000000000..b37752214a16
--- /dev/null
+++ b/arch/powerpc/include/asm/byteorder.h
@@ -0,0 +1,89 @@
+#ifndef _ASM_POWERPC_BYTEORDER_H
+#define _ASM_POWERPC_BYTEORDER_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+#ifdef __KERNEL__
+
+static __inline__ __u16 ld_le16(const volatile __u16 *addr)
+{
+	__u16 val;
+
+	__asm__ __volatile__ ("lhbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
+	return val;
+}
+
+static __inline__ void st_le16(volatile __u16 *addr, const __u16 val)
+{
+	__asm__ __volatile__ ("sthbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
+}
+
+static __inline__ __u32 ld_le32(const volatile __u32 *addr)
+{
+	__u32 val;
+
+	__asm__ __volatile__ ("lwbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
+	return val;
+}
+
+static __inline__ void st_le32(volatile __u32 *addr, const __u32 val)
+{
+	__asm__ __volatile__ ("stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
+}
+
+static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 value)
+{
+	__u16 result;
+
+	__asm__("rlwimi %0,%1,8,16,23"
+	    : "=r" (result)
+	    : "r" (value), "0" (value >> 8));
+	return result;
+}
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 value)
+{
+	__u32 result;
+
+	__asm__("rlwimi %0,%1,24,16,23\n\t"
+	    "rlwimi %0,%1,8,8,15\n\t"
+	    "rlwimi %0,%1,24,0,7"
+	    : "=r" (result)
+	    : "r" (value), "0" (value >> 24));
+	return result;
+}
+
+#define __arch__swab16(x) ___arch__swab16(x)
+#define __arch__swab32(x) ___arch__swab32(x)
+
+/* The same, but returns converted value from the location pointer by addr. */
+#define __arch__swab16p(addr) ld_le16(addr)
+#define __arch__swab32p(addr) ld_le32(addr)
+
+/* The same, but do the conversion in situ, ie. put the value back to addr. */
+#define __arch__swab16s(addr) st_le16(addr,*addr)
+#define __arch__swab32s(addr) st_le32(addr,*addr)
+
+#endif /* __KERNEL__ */
+
+#ifndef __STRICT_ANSI__
+#define __BYTEORDER_HAS_U64__
+#ifndef __powerpc64__
+#define __SWAB_64_THRU_32__
+#endif /* __powerpc64__ */
+#endif /* __STRICT_ANSI__ */
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _ASM_POWERPC_BYTEORDER_H */
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
new file mode 100644
index 000000000000..81de6eb3455d
--- /dev/null
+++ b/arch/powerpc/include/asm/cache.h
@@ -0,0 +1,45 @@
+#ifndef _ASM_POWERPC_CACHE_H
+#define _ASM_POWERPC_CACHE_H
+
+#ifdef __KERNEL__
+
+
+/* bytes per L1 cache line */
+#if defined(CONFIG_8xx) || defined(CONFIG_403GCX)
+#define L1_CACHE_SHIFT		4
+#define MAX_COPY_PREFETCH	1
+#elif defined(CONFIG_PPC_E500MC)
+#define L1_CACHE_SHIFT		6
+#define MAX_COPY_PREFETCH	4
+#elif defined(CONFIG_PPC32)
+#define L1_CACHE_SHIFT		5
+#define MAX_COPY_PREFETCH	4
+#else /* CONFIG_PPC64 */
+#define L1_CACHE_SHIFT		7
+#endif
+
+#define	L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define	SMP_CACHE_BYTES		L1_CACHE_BYTES
+
+#if defined(__powerpc64__) && !defined(__ASSEMBLY__)
+struct ppc64_caches {
+	u32	dsize;			/* L1 d-cache size */
+	u32	dline_size;		/* L1 d-cache line size	*/
+	u32	log_dline_size;
+	u32	dlines_per_page;
+	u32	isize;			/* L1 i-cache size */
+	u32	iline_size;		/* L1 i-cache line size	*/
+	u32	log_iline_size;
+	u32	ilines_per_page;
+};
+
+extern struct ppc64_caches ppc64_caches;
+#endif /* __powerpc64__ && ! __ASSEMBLY__ */
+
+#if !defined(__ASSEMBLY__)
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_CACHE_H */
diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
new file mode 100644
index 000000000000..ba667a383b8c
--- /dev/null
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -0,0 +1,75 @@
+/*
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_CACHEFLUSH_H
+#define _ASM_POWERPC_CACHEFLUSH_H
+
+#ifdef __KERNEL__
+
+#include <linux/mm.h>
+#include <asm/cputable.h>
+
+/*
+ * No cache flushing is required when address mappings are changed,
+ * because the caches on PowerPCs are physically addressed.
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_icache_page(vma, page)		do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+extern void flush_dcache_page(struct page *page);
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+extern void __flush_icache_range(unsigned long, unsigned long);
+static inline void flush_icache_range(unsigned long start, unsigned long stop)
+{
+	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
+		__flush_icache_range(start, stop);
+}
+
+extern void flush_icache_user_range(struct vm_area_struct *vma,
+				    struct page *page, unsigned long addr,
+				    int len);
+extern void __flush_dcache_icache(void *page_va);
+extern void flush_dcache_icache_page(struct page *page);
+#if defined(CONFIG_PPC32) && !defined(CONFIG_BOOKE)
+extern void __flush_dcache_icache_phys(unsigned long physaddr);
+#endif /* CONFIG_PPC32 && !CONFIG_BOOKE */
+
+extern void flush_dcache_range(unsigned long start, unsigned long stop);
+#ifdef CONFIG_PPC32
+extern void clean_dcache_range(unsigned long start, unsigned long stop);
+extern void invalidate_dcache_range(unsigned long start, unsigned long stop);
+#endif /* CONFIG_PPC32 */
+#ifdef CONFIG_PPC64
+extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
+extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
+#endif
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do { \
+		memcpy(dst, src, len); \
+		flush_icache_user_range(vma, page, vaddr, len); \
+	} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+/* internal debugging function */
+void kernel_map_pages(struct page *page, int numpages, int enable);
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_CACHEFLUSH_H */
diff --git a/arch/powerpc/include/asm/cell-pmu.h b/arch/powerpc/include/asm/cell-pmu.h
new file mode 100644
index 000000000000..8066eede3a0c
--- /dev/null
+++ b/arch/powerpc/include/asm/cell-pmu.h
@@ -0,0 +1,105 @@
+/*
+ * Cell Broadband Engine Performance Monitor
+ *
+ * (C) Copyright IBM Corporation 2006
+ *
+ * Author:
+ *   David Erb (djerb@us.ibm.com)
+ *   Kevin Corry (kevcorry@us.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_CELL_PMU_H__
+#define __ASM_CELL_PMU_H__
+
+/* The Cell PMU has four hardware performance counters, which can be
+ * configured as four 32-bit counters or eight 16-bit counters.
+ */
+#define NR_PHYS_CTRS 4
+#define NR_CTRS      (NR_PHYS_CTRS * 2)
+
+/* Macros for the pm_control register. */
+#define CBE_PM_16BIT_CTR(ctr)              (1 << (24 - ((ctr) & (NR_PHYS_CTRS - 1))))
+#define CBE_PM_ENABLE_PERF_MON             0x80000000
+#define CBE_PM_STOP_AT_MAX                 0x40000000
+#define CBE_PM_TRACE_MODE_GET(pm_control)  (((pm_control) >> 28) & 0x3)
+#define CBE_PM_TRACE_MODE_SET(mode)        (((mode)  & 0x3) << 28)
+#define CBE_PM_COUNT_MODE_SET(count)       (((count) & 0x3) << 18)
+#define CBE_PM_FREEZE_ALL_CTRS             0x00100000
+#define CBE_PM_ENABLE_EXT_TRACE            0x00008000
+
+/* Macros for the trace_address register. */
+#define CBE_PM_TRACE_BUF_FULL              0x00000800
+#define CBE_PM_TRACE_BUF_EMPTY             0x00000400
+#define CBE_PM_TRACE_BUF_DATA_COUNT(ta)    ((ta) & 0x3ff)
+#define CBE_PM_TRACE_BUF_MAX_COUNT         0x400
+
+/* Macros for the pm07_control registers. */
+#define CBE_PM_CTR_INPUT_MUX(pm07_control) (((pm07_control) >> 26) & 0x3f)
+#define CBE_PM_CTR_INPUT_CONTROL           0x02000000
+#define CBE_PM_CTR_POLARITY                0x01000000
+#define CBE_PM_CTR_COUNT_CYCLES            0x00800000
+#define CBE_PM_CTR_ENABLE                  0x00400000
+#define PM07_CTR_INPUT_MUX(x)              (((x) & 0x3F) << 26)
+#define PM07_CTR_INPUT_CONTROL(x)          (((x) & 1) << 25)
+#define PM07_CTR_POLARITY(x)               (((x) & 1) << 24)
+#define PM07_CTR_COUNT_CYCLES(x)           (((x) & 1) << 23)
+#define PM07_CTR_ENABLE(x)                 (((x) & 1) << 22)
+
+/* Macros for the pm_status register. */
+#define CBE_PM_CTR_OVERFLOW_INTR(ctr)      (1 << (31 - ((ctr) & 7)))
+
+enum pm_reg_name {
+	group_control,
+	debug_bus_control,
+	trace_address,
+	ext_tr_timer,
+	pm_status,
+	pm_control,
+	pm_interval,
+	pm_start_stop,
+};
+
+/* Routines for reading/writing the PMU registers. */
+extern u32  cbe_read_phys_ctr(u32 cpu, u32 phys_ctr);
+extern void cbe_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
+extern u32  cbe_read_ctr(u32 cpu, u32 ctr);
+extern void cbe_write_ctr(u32 cpu, u32 ctr, u32 val);
+
+extern u32  cbe_read_pm07_control(u32 cpu, u32 ctr);
+extern void cbe_write_pm07_control(u32 cpu, u32 ctr, u32 val);
+extern u32  cbe_read_pm(u32 cpu, enum pm_reg_name reg);
+extern void cbe_write_pm(u32 cpu, enum pm_reg_name reg, u32 val);
+
+extern u32  cbe_get_ctr_size(u32 cpu, u32 phys_ctr);
+extern void cbe_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
+
+extern void cbe_enable_pm(u32 cpu);
+extern void cbe_disable_pm(u32 cpu);
+
+extern void cbe_read_trace_buffer(u32 cpu, u64 *buf);
+
+extern void cbe_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask);
+extern void cbe_disable_pm_interrupts(u32 cpu);
+extern u32  cbe_get_and_clear_pm_interrupts(u32 cpu);
+extern void cbe_sync_irq(int node);
+
+#define CBE_COUNT_SUPERVISOR_MODE       0
+#define CBE_COUNT_HYPERVISOR_MODE       1
+#define CBE_COUNT_PROBLEM_MODE          2
+#define CBE_COUNT_ALL_MODES             3
+
+#endif /* __ASM_CELL_PMU_H__ */
diff --git a/arch/powerpc/include/asm/cell-regs.h b/arch/powerpc/include/asm/cell-regs.h
new file mode 100644
index 000000000000..fd6fd00434ef
--- /dev/null
+++ b/arch/powerpc/include/asm/cell-regs.h
@@ -0,0 +1,315 @@
+/*
+ * cbe_regs.h
+ *
+ * This file is intended to hold the various register definitions for CBE
+ * on-chip system devices (memory controller, IO controller, etc...)
+ *
+ * (C) Copyright IBM Corporation 2001,2006
+ *
+ * Authors: Maximino Aguilar (maguilar@us.ibm.com)
+ *          David J. Erb (djerb@us.ibm.com)
+ *
+ * (c) 2006 Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp.
+ */
+
+#ifndef CBE_REGS_H
+#define CBE_REGS_H
+
+#include <asm/cell-pmu.h>
+
+/*
+ *
+ * Some HID register definitions
+ *
+ */
+
+/* CBE specific HID0 bits */
+#define HID0_CBE_THERM_WAKEUP	0x0000020000000000ul
+#define HID0_CBE_SYSERR_WAKEUP	0x0000008000000000ul
+#define HID0_CBE_THERM_INT_EN	0x0000000400000000ul
+#define HID0_CBE_SYSERR_INT_EN	0x0000000200000000ul
+
+#define MAX_CBE		2
+
+/*
+ *
+ * Pervasive unit register definitions
+ *
+ */
+
+union spe_reg {
+	u64 val;
+	u8 spe[8];
+};
+
+union ppe_spe_reg {
+	u64 val;
+	struct {
+		u32 ppe;
+		u32 spe;
+	};
+};
+
+
+struct cbe_pmd_regs {
+	/* Debug Bus Control */
+	u64	pad_0x0000;					/* 0x0000 */
+
+	u64	group_control;					/* 0x0008 */
+
+	u8	pad_0x0010_0x00a8 [0x00a8 - 0x0010];		/* 0x0010 */
+
+	u64	debug_bus_control;				/* 0x00a8 */
+
+	u8	pad_0x00b0_0x0100 [0x0100 - 0x00b0];		/* 0x00b0 */
+
+	u64	trace_aux_data;					/* 0x0100 */
+	u64	trace_buffer_0_63;				/* 0x0108 */
+	u64	trace_buffer_64_127;				/* 0x0110 */
+	u64	trace_address;					/* 0x0118 */
+	u64	ext_tr_timer;					/* 0x0120 */
+
+	u8	pad_0x0128_0x0400 [0x0400 - 0x0128];		/* 0x0128 */
+
+	/* Performance Monitor */
+	u64	pm_status;					/* 0x0400 */
+	u64	pm_control;					/* 0x0408 */
+	u64	pm_interval;					/* 0x0410 */
+	u64	pm_ctr[4];					/* 0x0418 */
+	u64	pm_start_stop;					/* 0x0438 */
+	u64	pm07_control[8];				/* 0x0440 */
+
+	u8	pad_0x0480_0x0800 [0x0800 - 0x0480];		/* 0x0480 */
+
+	/* Thermal Sensor Registers */
+	union	spe_reg	ts_ctsr1;				/* 0x0800 */
+	u64	ts_ctsr2;					/* 0x0808 */
+	union	spe_reg	ts_mtsr1;				/* 0x0810 */
+	u64	ts_mtsr2;					/* 0x0818 */
+	union	spe_reg	ts_itr1;				/* 0x0820 */
+	u64	ts_itr2;					/* 0x0828 */
+	u64	ts_gitr;					/* 0x0830 */
+	u64	ts_isr;						/* 0x0838 */
+	u64	ts_imr;						/* 0x0840 */
+	union	spe_reg	tm_cr1;					/* 0x0848 */
+	u64	tm_cr2;						/* 0x0850 */
+	u64	tm_simr;					/* 0x0858 */
+	union	ppe_spe_reg tm_tpr;				/* 0x0860 */
+	union	spe_reg	tm_str1;				/* 0x0868 */
+	u64	tm_str2;					/* 0x0870 */
+	union	ppe_spe_reg tm_tsr;				/* 0x0878 */
+
+	/* Power Management */
+	u64	pmcr;						/* 0x0880 */
+#define CBE_PMD_PAUSE_ZERO_CONTROL	0x10000
+	u64	pmsr;						/* 0x0888 */
+
+	/* Time Base Register */
+	u64	tbr;						/* 0x0890 */
+
+	u8	pad_0x0898_0x0c00 [0x0c00 - 0x0898];		/* 0x0898 */
+
+	/* Fault Isolation Registers */
+	u64	checkstop_fir;					/* 0x0c00 */
+	u64	recoverable_fir;				/* 0x0c08 */
+	u64	spec_att_mchk_fir;				/* 0x0c10 */
+	u32	fir_mode_reg;					/* 0x0c18 */
+	u8	pad_0x0c1c_0x0c20 [4];				/* 0x0c1c */
+#define CBE_PMD_FIR_MODE_M8		0x00800
+	u64	fir_enable_mask;				/* 0x0c20 */
+
+	u8	pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28];		/* 0x0c28 */
+	u64	ras_esc_0;					/* 0x0ca8 */
+	u8	pad_0x0cb0_0x1000 [0x1000 - 0x0cb0];		/* 0x0cb0 */
+};
+
+extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np);
+extern struct cbe_pmd_regs __iomem *cbe_get_cpu_pmd_regs(int cpu);
+
+/*
+ * PMU shadow registers
+ *
+ * Many of the registers in the performance monitoring unit are write-only,
+ * so we need to save a copy of what we write to those registers.
+ *
+ * The actual data counters are read/write. However, writing to the counters
+ * only takes effect if the PMU is enabled. Otherwise the value is stored in
+ * a hardware latch until the next time the PMU is enabled. So we save a copy
+ * of the counter values if we need to read them back while the PMU is
+ * disabled. The counter_value_in_latch field is a bitmap indicating which
+ * counters currently have a value waiting to be written.
+ */
+
+struct cbe_pmd_shadow_regs {
+	u32 group_control;
+	u32 debug_bus_control;
+	u32 trace_address;
+	u32 ext_tr_timer;
+	u32 pm_status;
+	u32 pm_control;
+	u32 pm_interval;
+	u32 pm_start_stop;
+	u32 pm07_control[NR_CTRS];
+
+	u32 pm_ctr[NR_PHYS_CTRS];
+	u32 counter_value_in_latch;
+};
+
+extern struct cbe_pmd_shadow_regs *cbe_get_pmd_shadow_regs(struct device_node *np);
+extern struct cbe_pmd_shadow_regs *cbe_get_cpu_pmd_shadow_regs(int cpu);
+
+/*
+ *
+ * IIC unit register definitions
+ *
+ */
+
+struct cbe_iic_pending_bits {
+	u32 data;
+	u8 flags;
+	u8 class;
+	u8 source;
+	u8 prio;
+};
+
+#define CBE_IIC_IRQ_VALID	0x80
+#define CBE_IIC_IRQ_IPI		0x40
+
+struct cbe_iic_thread_regs {
+	struct cbe_iic_pending_bits pending;
+	struct cbe_iic_pending_bits pending_destr;
+	u64 generate;
+	u64 prio;
+};
+
+struct cbe_iic_regs {
+	u8	pad_0x0000_0x0400[0x0400 - 0x0000];		/* 0x0000 */
+
+	/* IIC interrupt registers */
+	struct	cbe_iic_thread_regs thread[2];			/* 0x0400 */
+
+	u64	iic_ir;						/* 0x0440 */
+#define CBE_IIC_IR_PRIO(x)      (((x) & 0xf) << 12)
+#define CBE_IIC_IR_DEST_NODE(x) (((x) & 0xf) << 4)
+#define CBE_IIC_IR_DEST_UNIT(x) ((x) & 0xf)
+#define CBE_IIC_IR_IOC_0        0x0
+#define CBE_IIC_IR_IOC_1S       0xb
+#define CBE_IIC_IR_PT_0         0xe
+#define CBE_IIC_IR_PT_1         0xf
+
+	u64	iic_is;						/* 0x0448 */
+#define CBE_IIC_IS_PMI		0x2
+
+	u8	pad_0x0450_0x0500[0x0500 - 0x0450];		/* 0x0450 */
+
+	/* IOC FIR */
+	u64	ioc_fir_reset;					/* 0x0500 */
+	u64	ioc_fir_set;					/* 0x0508 */
+	u64	ioc_checkstop_enable;				/* 0x0510 */
+	u64	ioc_fir_error_mask;				/* 0x0518 */
+	u64	ioc_syserr_enable;				/* 0x0520 */
+	u64	ioc_fir;					/* 0x0528 */
+
+	u8	pad_0x0530_0x1000[0x1000 - 0x0530];		/* 0x0530 */
+};
+
+extern struct cbe_iic_regs __iomem *cbe_get_iic_regs(struct device_node *np);
+extern struct cbe_iic_regs __iomem *cbe_get_cpu_iic_regs(int cpu);
+
+
+struct cbe_mic_tm_regs {
+	u8	pad_0x0000_0x0040[0x0040 - 0x0000];		/* 0x0000 */
+
+	u64	mic_ctl_cnfg2;					/* 0x0040 */
+#define CBE_MIC_ENABLE_AUX_TRC		0x8000000000000000LL
+#define CBE_MIC_DISABLE_PWR_SAV_2	0x0200000000000000LL
+#define CBE_MIC_DISABLE_AUX_TRC_WRAP	0x0100000000000000LL
+#define CBE_MIC_ENABLE_AUX_TRC_INT	0x0080000000000000LL
+
+	u64	pad_0x0048;					/* 0x0048 */
+
+	u64	mic_aux_trc_base;				/* 0x0050 */
+	u64	mic_aux_trc_max_addr;				/* 0x0058 */
+	u64	mic_aux_trc_cur_addr;				/* 0x0060 */
+	u64	mic_aux_trc_grf_addr;				/* 0x0068 */
+	u64	mic_aux_trc_grf_data;				/* 0x0070 */
+
+	u64	pad_0x0078;					/* 0x0078 */
+
+	u64	mic_ctl_cnfg_0;					/* 0x0080 */
+#define CBE_MIC_DISABLE_PWR_SAV_0	0x8000000000000000LL
+
+	u64	pad_0x0088;					/* 0x0088 */
+
+	u64	slow_fast_timer_0;				/* 0x0090 */
+	u64	slow_next_timer_0;				/* 0x0098 */
+
+	u8	pad_0x00a0_0x00f8[0x00f8 - 0x00a0];		/* 0x00a0 */
+	u64    	mic_df_ecc_address_0;				/* 0x00f8 */
+
+	u8	pad_0x0100_0x01b8[0x01b8 - 0x0100];		/* 0x0100 */
+	u64    	mic_df_ecc_address_1;				/* 0x01b8 */
+
+	u64	mic_ctl_cnfg_1;					/* 0x01c0 */
+#define CBE_MIC_DISABLE_PWR_SAV_1	0x8000000000000000LL
+
+	u64	pad_0x01c8;					/* 0x01c8 */
+
+	u64	slow_fast_timer_1;				/* 0x01d0 */
+	u64	slow_next_timer_1;				/* 0x01d8 */
+
+	u8	pad_0x01e0_0x0208[0x0208 - 0x01e0];		/* 0x01e0 */
+	u64	mic_exc;					/* 0x0208 */
+#define CBE_MIC_EXC_BLOCK_SCRUB		0x0800000000000000ULL
+#define CBE_MIC_EXC_FAST_SCRUB		0x0100000000000000ULL
+
+	u64	mic_mnt_cfg;					/* 0x0210 */
+#define CBE_MIC_MNT_CFG_CHAN_0_POP	0x0002000000000000ULL
+#define CBE_MIC_MNT_CFG_CHAN_1_POP	0x0004000000000000ULL
+
+	u64	mic_df_config;					/* 0x0218 */
+#define CBE_MIC_ECC_DISABLE_0		0x4000000000000000ULL
+#define CBE_MIC_ECC_REP_SINGLE_0	0x2000000000000000ULL
+#define CBE_MIC_ECC_DISABLE_1		0x0080000000000000ULL
+#define CBE_MIC_ECC_REP_SINGLE_1	0x0040000000000000ULL
+
+	u8	pad_0x0220_0x0230[0x0230 - 0x0220];		/* 0x0220 */
+	u64	mic_fir;					/* 0x0230 */
+#define CBE_MIC_FIR_ECC_SINGLE_0_ERR	0x0200000000000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_0_ERR	0x0100000000000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_1_ERR	0x0080000000000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_1_ERR	0x0040000000000000ULL
+#define CBE_MIC_FIR_ECC_ERR_MASK	0xffff000000000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_0_CTE	0x0000020000000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_0_CTE	0x0000010000000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_1_CTE	0x0000008000000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_1_CTE	0x0000004000000000ULL
+#define CBE_MIC_FIR_ECC_CTE_MASK	0x0000ffff00000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_0_RESET	0x0000000002000000ULL
+#define CBE_MIC_FIR_ECC_MULTI_0_RESET	0x0000000001000000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_1_RESET	0x0000000000800000ULL
+#define CBE_MIC_FIR_ECC_MULTI_1_RESET	0x0000000000400000ULL
+#define CBE_MIC_FIR_ECC_RESET_MASK	0x00000000ffff0000ULL
+#define CBE_MIC_FIR_ECC_SINGLE_0_SET	0x0000000000000200ULL
+#define CBE_MIC_FIR_ECC_MULTI_0_SET	0x0000000000000100ULL
+#define CBE_MIC_FIR_ECC_SINGLE_1_SET	0x0000000000000080ULL
+#define CBE_MIC_FIR_ECC_MULTI_1_SET	0x0000000000000040ULL
+#define CBE_MIC_FIR_ECC_SET_MASK	0x000000000000ffffULL
+	u64	mic_fir_debug;					/* 0x0238 */
+
+	u8	pad_0x0240_0x1000[0x1000 - 0x0240];		/* 0x0240 */
+};
+
+extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np);
+extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu);
+
+/* some utility functions to deal with SMT */
+extern u32 cbe_get_hw_thread_id(int cpu);
+extern u32 cbe_cpu_to_node(int cpu);
+extern u32 cbe_node_to_cpu(int node);
+
+/* Init this module early */
+extern void cbe_regs_init(void);
+
+
+#endif /* CBE_REGS_H */
diff --git a/arch/powerpc/include/asm/checksum.h b/arch/powerpc/include/asm/checksum.h
new file mode 100644
index 000000000000..7cdf358337cf
--- /dev/null
+++ b/arch/powerpc/include/asm/checksum.h
@@ -0,0 +1,117 @@
+#ifndef _ASM_POWERPC_CHECKSUM_H
+#define _ASM_POWERPC_CHECKSUM_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * This is a version of ip_compute_csum() optimized for IP headers,
+ * which always checksum on 4 octet boundaries.  ihl is the number
+ * of 32-bit words and is always >= 5.
+ */
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+extern __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+					unsigned short len,
+					unsigned short proto,
+					__wsum sum);
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * Computes the checksum of a memory block at src, length len,
+ * and adds in "sum" (32-bit), while copying the block to dst.
+ * If an access exception occurs on src or dst, it stores -EFAULT
+ * to *src_err or *dst_err respectively (if that pointer is not
+ * NULL), and, for an error on src, zeroes the rest of dst.
+ *
+ * Like csum_partial, this must be called with even lengths,
+ * except for the last fragment.
+ */
+extern __wsum csum_partial_copy_generic(const void *src, void *dst,
+					      int len, __wsum sum,
+					      int *src_err, int *dst_err);
+/*
+ * the same as csum_partial, but copies from src to dst while it
+ * checksums.
+ */
+#define csum_partial_copy_from_user(src, dst, len, sum, errp)   \
+        csum_partial_copy_generic((__force const void *)(src), (dst), (len), (sum), (errp), NULL)
+
+#define csum_partial_copy_nocheck(src, dst, len, sum)   \
+        csum_partial_copy_generic((src), (dst), (len), (sum), NULL, NULL)
+
+
+/*
+ * turns a 32-bit partial checksum (e.g. from csum_partial) into a
+ * 1's complement 16-bit checksum.
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp;
+
+	/* swap the two 16-bit halves of sum */
+	__asm__("rlwinm %0,%1,16,0,31" : "=r" (tmp) : "r" (sum));
+	/* if there is a carry from adding the two 16-bit halves,
+	   it will carry from the lower half into the upper half,
+	   giving us the correct sum in the upper half. */
+	return (__force __sum16)(~((__force u32)sum + tmp) >> 16);
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+                                     unsigned short len,
+                                     unsigned short proto,
+                                     __wsum sum)
+{
+#ifdef __powerpc64__
+	unsigned long s = (__force u32)sum;
+
+	s += (__force u32)saddr;
+	s += (__force u32)daddr;
+	s += proto + len;
+	s += (s >> 32);
+	return (__force __wsum) s;
+#else
+    __asm__("\n\
+	addc %0,%0,%1 \n\
+	adde %0,%0,%2 \n\
+	adde %0,%0,%3 \n\
+	addze %0,%0 \n\
+	"
+	: "=r" (sum)
+	: "r" (daddr), "r"(saddr), "r"(proto + len), "0"(sum));
+	return sum;
+#endif
+}
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/powerpc/include/asm/clk_interface.h b/arch/powerpc/include/asm/clk_interface.h
new file mode 100644
index 000000000000..ab1882c1e176
--- /dev/null
+++ b/arch/powerpc/include/asm/clk_interface.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_POWERPC_CLK_INTERFACE_H
+#define __ASM_POWERPC_CLK_INTERFACE_H
+
+#include <linux/clk.h>
+
+struct clk_interface {
+	struct clk*	(*clk_get)	(struct device *dev, const char *id);
+	int		(*clk_enable)	(struct clk *clk);
+	void		(*clk_disable)	(struct clk *clk);
+	unsigned long	(*clk_get_rate)	(struct clk *clk);
+	void		(*clk_put)	(struct clk *clk);
+	long		(*clk_round_rate) (struct clk *clk, unsigned long rate);
+	int 		(*clk_set_rate)	(struct clk *clk, unsigned long rate);
+	int		(*clk_set_parent) (struct clk *clk, struct clk *parent);
+	struct clk*	(*clk_get_parent) (struct clk *clk);
+};
+
+extern struct clk_interface clk_functions;
+
+#endif /* __ASM_POWERPC_CLK_INTERFACE_H */
diff --git a/arch/powerpc/include/asm/code-patching.h b/arch/powerpc/include/asm/code-patching.h
new file mode 100644
index 000000000000..107d9b915e33
--- /dev/null
+++ b/arch/powerpc/include/asm/code-patching.h
@@ -0,0 +1,54 @@
+#ifndef _ASM_POWERPC_CODE_PATCHING_H
+#define _ASM_POWERPC_CODE_PATCHING_H
+
+/*
+ * Copyright 2008, Michael Ellerman, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/types.h>
+
+#define PPC_NOP_INSTR		0x60000000
+#define PPC_LWSYNC_INSTR	0x7c2004ac
+
+/* Flags for create_branch:
+ * "b"   == create_branch(addr, target, 0);
+ * "ba"  == create_branch(addr, target, BRANCH_ABSOLUTE);
+ * "bl"  == create_branch(addr, target, BRANCH_SET_LINK);
+ * "bla" == create_branch(addr, target, BRANCH_ABSOLUTE | BRANCH_SET_LINK);
+ */
+#define BRANCH_SET_LINK	0x1
+#define BRANCH_ABSOLUTE	0x2
+
+unsigned int create_branch(const unsigned int *addr,
+			   unsigned long target, int flags);
+unsigned int create_cond_branch(const unsigned int *addr,
+				unsigned long target, int flags);
+void patch_branch(unsigned int *addr, unsigned long target, int flags);
+void patch_instruction(unsigned int *addr, unsigned int instr);
+
+int instr_is_relative_branch(unsigned int instr);
+int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr);
+unsigned long branch_target(const unsigned int *instr);
+unsigned int translate_branch(const unsigned int *dest,
+			      const unsigned int *src);
+
+static inline unsigned long ppc_function_entry(void *func)
+{
+#ifdef CONFIG_PPC64
+	/*
+	 * On PPC64 the function pointer actually points to the function's
+	 * descriptor. The first entry in the descriptor is the address
+	 * of the function text.
+	 */
+	return ((func_descr_t *)func)->entry;
+#else
+	return (unsigned long)func;
+#endif
+}
+
+#endif /* _ASM_POWERPC_CODE_PATCHING_H */
diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h
new file mode 100644
index 000000000000..d811a8cd7b58
--- /dev/null
+++ b/arch/powerpc/include/asm/compat.h
@@ -0,0 +1,214 @@
+#ifndef _ASM_POWERPC_COMPAT_H
+#define _ASM_POWERPC_COMPAT_H
+#ifdef __KERNEL__
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <linux/sched.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_pid_t;
+typedef u32		__compat_uid_t;
+typedef u32		__compat_gid_t;
+typedef u32		__compat_uid32_t;
+typedef u32		__compat_gid32_t;
+typedef u32		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u32		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef s16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_key_t;
+typedef s32		compat_timer_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef s64		compat_s64;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+typedef u64		compat_u64;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	__compat_uid32_t	st_uid;
+	__compat_gid32_t	st_gid;
+	compat_dev_t	st_rdev;
+	compat_off_t	st_size;
+	compat_off_t	st_blksize;
+	compat_off_t	st_blocks;
+	compat_time_t	st_atime;
+	u32		st_atime_nsec;
+	compat_time_t	st_mtime;
+	u32		st_mtime_nsec;
+	compat_time_t	st_ctime;
+	u32		st_ctime_nsec;
+	u32		__unused4[2];
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_spare[5];
+};
+
+#define COMPAT_RLIM_OLD_INFINITY	0x7fffffff
+#define COMPAT_RLIM_INFINITY		0xffffffff
+
+typedef u32		compat_old_sigset_t;
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = current->thread.regs;
+	unsigned long usp = regs->gpr[1];
+
+	/*
+	 * We cant access below the stack pointer in the 32bit ABI and
+	 * can access 288 bytes in the 64bit ABI
+	 */
+	if (!(test_thread_flag(TIF_32BIT)))
+		usp -= 288;
+
+	return (void __user *) (usp - len);
+}
+
+/*
+ * ipc64_perm is actually 32/64bit clean but since the compat layer refers to
+ * it we may as well define it.
+ */
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__compat_uid_t uid;
+	__compat_gid_t gid;
+	__compat_uid_t cuid;
+	__compat_gid_t cgid;
+	compat_mode_t mode;
+	unsigned int seq;
+	unsigned int __pad2;
+	unsigned long __unused1;	/* yes they really are 64bit pads */
+	unsigned long __unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	unsigned int __unused1;
+	compat_time_t sem_otime;
+	unsigned int __unused2;
+	compat_time_t sem_ctime;
+	compat_ulong_t sem_nsems;
+	compat_ulong_t __unused3;
+	compat_ulong_t __unused4;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	unsigned int __unused1;
+	compat_time_t msg_stime;
+	unsigned int __unused2;
+	compat_time_t msg_rtime;
+	unsigned int __unused3;
+	compat_time_t msg_ctime;
+	compat_ulong_t msg_cbytes;
+	compat_ulong_t msg_qnum;
+	compat_ulong_t msg_qbytes;
+	compat_pid_t msg_lspid;
+	compat_pid_t msg_lrpid;
+	compat_ulong_t __unused4;
+	compat_ulong_t __unused5;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	unsigned int __unused1;
+	compat_time_t shm_atime;
+	unsigned int __unused2;
+	compat_time_t shm_dtime;
+	unsigned int __unused3;
+	compat_time_t shm_ctime;
+	unsigned int __unused4;
+	compat_size_t shm_segsz;
+	compat_pid_t shm_cpid;
+	compat_pid_t shm_lpid;
+	compat_ulong_t shm_nattch;
+	compat_ulong_t __unused5;
+	compat_ulong_t __unused6;
+};
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_COMPAT_H */
diff --git a/arch/powerpc/include/asm/cpm.h b/arch/powerpc/include/asm/cpm.h
new file mode 100644
index 000000000000..24d79e3abd8e
--- /dev/null
+++ b/arch/powerpc/include/asm/cpm.h
@@ -0,0 +1,106 @@
+#ifndef __CPM_H
+#define __CPM_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/of.h>
+
+/* Opcodes common to CPM1 and CPM2
+*/
+#define CPM_CR_INIT_TRX		((ushort)0x0000)
+#define CPM_CR_INIT_RX		((ushort)0x0001)
+#define CPM_CR_INIT_TX		((ushort)0x0002)
+#define CPM_CR_HUNT_MODE	((ushort)0x0003)
+#define CPM_CR_STOP_TX		((ushort)0x0004)
+#define CPM_CR_GRA_STOP_TX	((ushort)0x0005)
+#define CPM_CR_RESTART_TX	((ushort)0x0006)
+#define CPM_CR_CLOSE_RX_BD	((ushort)0x0007)
+#define CPM_CR_SET_GADDR	((ushort)0x0008)
+#define CPM_CR_SET_TIMER	((ushort)0x0008)
+#define CPM_CR_STOP_IDMA	((ushort)0x000b)
+
+/* Buffer descriptors used by many of the CPM protocols. */
+typedef struct cpm_buf_desc {
+	ushort	cbd_sc;		/* Status and Control */
+	ushort	cbd_datlen;	/* Data length in buffer */
+	uint	cbd_bufaddr;	/* Buffer address in host memory */
+} cbd_t;
+
+/* Buffer descriptor control/status used by serial
+ */
+
+#define BD_SC_EMPTY	(0x8000)	/* Receive is empty */
+#define BD_SC_READY	(0x8000)	/* Transmit is ready */
+#define BD_SC_WRAP	(0x2000)	/* Last buffer descriptor */
+#define BD_SC_INTRPT	(0x1000)	/* Interrupt on change */
+#define BD_SC_LAST	(0x0800)	/* Last buffer in frame */
+#define BD_SC_TC	(0x0400)	/* Transmit CRC */
+#define BD_SC_CM	(0x0200)	/* Continous mode */
+#define BD_SC_ID	(0x0100)	/* Rec'd too many idles */
+#define BD_SC_P		(0x0100)	/* xmt preamble */
+#define BD_SC_BR	(0x0020)	/* Break received */
+#define BD_SC_FR	(0x0010)	/* Framing error */
+#define BD_SC_PR	(0x0008)	/* Parity error */
+#define BD_SC_NAK	(0x0004)	/* NAK - did not respond */
+#define BD_SC_OV	(0x0002)	/* Overrun */
+#define BD_SC_UN	(0x0002)	/* Underrun */
+#define BD_SC_CD	(0x0001)	/* */
+#define BD_SC_CL	(0x0001)	/* Collision */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_RX_EMPTY	(0x8000)
+#define BD_ENET_RX_WRAP		(0x2000)
+#define BD_ENET_RX_INTR		(0x1000)
+#define BD_ENET_RX_LAST		(0x0800)
+#define BD_ENET_RX_FIRST	(0x0400)
+#define BD_ENET_RX_MISS		(0x0100)
+#define BD_ENET_RX_BC		(0x0080)	/* FCC Only */
+#define BD_ENET_RX_MC		(0x0040)	/* FCC Only */
+#define BD_ENET_RX_LG		(0x0020)
+#define BD_ENET_RX_NO		(0x0010)
+#define BD_ENET_RX_SH		(0x0008)
+#define BD_ENET_RX_CR		(0x0004)
+#define BD_ENET_RX_OV		(0x0002)
+#define BD_ENET_RX_CL		(0x0001)
+#define BD_ENET_RX_STATS	(0x01ff)	/* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+ * Common to SCC and FCC.
+ */
+#define BD_ENET_TX_READY	(0x8000)
+#define BD_ENET_TX_PAD		(0x4000)
+#define BD_ENET_TX_WRAP		(0x2000)
+#define BD_ENET_TX_INTR		(0x1000)
+#define BD_ENET_TX_LAST		(0x0800)
+#define BD_ENET_TX_TC		(0x0400)
+#define BD_ENET_TX_DEF		(0x0200)
+#define BD_ENET_TX_HB		(0x0100)
+#define BD_ENET_TX_LC		(0x0080)
+#define BD_ENET_TX_RL		(0x0040)
+#define BD_ENET_TX_RCMASK	(0x003c)
+#define BD_ENET_TX_UN		(0x0002)
+#define BD_ENET_TX_CSL		(0x0001)
+#define BD_ENET_TX_STATS	(0x03ff)	/* All status bits */
+
+/* Buffer descriptor control/status used by Transparent mode SCC.
+ */
+#define BD_SCC_TX_LAST		(0x0800)
+
+/* Buffer descriptor control/status used by I2C.
+ */
+#define BD_I2C_START		(0x0400)
+
+int cpm_muram_init(void);
+unsigned long cpm_muram_alloc(unsigned long size, unsigned long align);
+int cpm_muram_free(unsigned long offset);
+unsigned long cpm_muram_alloc_fixed(unsigned long offset, unsigned long size);
+void __iomem *cpm_muram_addr(unsigned long offset);
+unsigned long cpm_muram_offset(void __iomem *addr);
+dma_addr_t cpm_muram_dma(void __iomem *addr);
+int cpm_command(u32 command, u8 opcode);
+
+int cpm2_gpiochip_add32(struct device_node *np);
+
+#endif
diff --git a/arch/powerpc/include/asm/cpm1.h b/arch/powerpc/include/asm/cpm1.h
new file mode 100644
index 000000000000..2ff798744c1d
--- /dev/null
+++ b/arch/powerpc/include/asm/cpm1.h
@@ -0,0 +1,652 @@
+/*
+ * MPC8xx Communication Processor Module.
+ * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
+ *
+ * This file contains structures and information for the communication
+ * processor channels.  Some CPM control and status is available
+ * throught the MPC8xx internal memory map.  See immap.h for details.
+ * This file only contains what I need for the moment, not the total
+ * CPM capabilities.  I (or someone else) will add definitions as they
+ * are needed.  -- Dan
+ *
+ * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
+ * bytes of the DP RAM and relocates the I2C parameter area to the
+ * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
+ * or other use.
+ */
+#ifndef __CPM1__
+#define __CPM1__
+
+#include <asm/8xx_immap.h>
+#include <asm/ptrace.h>
+#include <asm/cpm.h>
+
+/* CPM Command register.
+*/
+#define CPM_CR_RST	((ushort)0x8000)
+#define CPM_CR_OPCODE	((ushort)0x0f00)
+#define CPM_CR_CHAN	((ushort)0x00f0)
+#define CPM_CR_FLG	((ushort)0x0001)
+
+/* Channel numbers.
+*/
+#define CPM_CR_CH_SCC1		((ushort)0x0000)
+#define CPM_CR_CH_I2C		((ushort)0x0001)	/* I2C and IDMA1 */
+#define CPM_CR_CH_SCC2		((ushort)0x0004)
+#define CPM_CR_CH_SPI		((ushort)0x0005)	/* SPI / IDMA2 / Timers */
+#define CPM_CR_CH_TIMER		CPM_CR_CH_SPI
+#define CPM_CR_CH_SCC3		((ushort)0x0008)
+#define CPM_CR_CH_SMC1		((ushort)0x0009)	/* SMC1 / DSP1 */
+#define CPM_CR_CH_SCC4		((ushort)0x000c)
+#define CPM_CR_CH_SMC2		((ushort)0x000d)	/* SMC2 / DSP2 */
+
+#define mk_cr_cmd(CH, CMD)	((CMD << 8) | (CH << 4))
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
+
+#define cpm_dpalloc cpm_muram_alloc
+#define cpm_dpfree cpm_muram_free
+#define cpm_dpram_addr cpm_muram_addr
+#define cpm_dpram_phys cpm_muram_dma
+
+extern void cpm_setbrg(uint brg, uint rate);
+
+extern void cpm_load_patch(cpm8xx_t *cp);
+
+extern void cpm_reset(void);
+
+/* Parameter RAM offsets.
+*/
+#define PROFF_SCC1	((uint)0x0000)
+#define PROFF_IIC	((uint)0x0080)
+#define PROFF_SCC2	((uint)0x0100)
+#define PROFF_SPI	((uint)0x0180)
+#define PROFF_SCC3	((uint)0x0200)
+#define PROFF_SMC1	((uint)0x0280)
+#define PROFF_SCC4	((uint)0x0300)
+#define PROFF_SMC2	((uint)0x0380)
+
+/* Define enough so I can at least use the serial port as a UART.
+ * The MBX uses SMC1 as the host serial port.
+ */
+typedef struct smc_uart {
+	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	smc_rfcr;	/* Rx function code */
+	u_char	smc_tfcr;	/* Tx function code */
+	ushort	smc_mrblr;	/* Max receive buffer length */
+	uint	smc_rstate;	/* Internal */
+	uint	smc_idp;	/* Internal */
+	ushort	smc_rbptr;	/* Internal */
+	ushort	smc_ibc;	/* Internal */
+	uint	smc_rxtmp;	/* Internal */
+	uint	smc_tstate;	/* Internal */
+	uint	smc_tdp;	/* Internal */
+	ushort	smc_tbptr;	/* Internal */
+	ushort	smc_tbc;	/* Internal */
+	uint	smc_txtmp;	/* Internal */
+	ushort	smc_maxidl;	/* Maximum idle characters */
+	ushort	smc_tmpidl;	/* Temporary idle counter */
+	ushort	smc_brklen;	/* Last received break length */
+	ushort	smc_brkec;	/* rcv'd break condition counter */
+	ushort	smc_brkcr;	/* xmt break count register */
+	ushort	smc_rmask;	/* Temporary bit mask */
+	char	res1[8];	/* Reserved */
+	ushort	smc_rpbase;	/* Relocation pointer */
+} smc_uart_t;
+
+/* Function code bits.
+*/
+#define SMC_EB	((u_char)0x10)	/* Set big endian byte order */
+
+/* SMC uart mode register.
+*/
+#define	SMCMR_REN	((ushort)0x0001)
+#define SMCMR_TEN	((ushort)0x0002)
+#define SMCMR_DM	((ushort)0x000c)
+#define SMCMR_SM_GCI	((ushort)0x0000)
+#define SMCMR_SM_UART	((ushort)0x0020)
+#define SMCMR_SM_TRANS	((ushort)0x0030)
+#define SMCMR_SM_MASK	((ushort)0x0030)
+#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
+#define SMCMR_REVD	SMCMR_PM_EVEN
+#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
+#define SMCMR_BS	SMCMR_PEN
+#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
+#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
+#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC2 as Centronics parallel printer.  It is half duplex, in that
+ * it can only receive or transmit.  The parameter ram values for
+ * each direction are either unique or properly overlap, so we can
+ * include them in one structure.
+ */
+typedef struct smc_centronics {
+	ushort	scent_rbase;
+	ushort	scent_tbase;
+	u_char	scent_cfcr;
+	u_char	scent_smask;
+	ushort	scent_mrblr;
+	uint	scent_rstate;
+	uint	scent_r_ptr;
+	ushort	scent_rbptr;
+	ushort	scent_r_cnt;
+	uint	scent_rtemp;
+	uint	scent_tstate;
+	uint	scent_t_ptr;
+	ushort	scent_tbptr;
+	ushort	scent_t_cnt;
+	uint	scent_ttemp;
+	ushort	scent_max_sl;
+	ushort	scent_sl_cnt;
+	ushort	scent_character1;
+	ushort	scent_character2;
+	ushort	scent_character3;
+	ushort	scent_character4;
+	ushort	scent_character5;
+	ushort	scent_character6;
+	ushort	scent_character7;
+	ushort	scent_character8;
+	ushort	scent_rccm;
+	ushort	scent_rccr;
+} smc_cent_t;
+
+/* Centronics Status Mask Register.
+*/
+#define SMC_CENT_F	((u_char)0x08)
+#define SMC_CENT_PE	((u_char)0x04)
+#define SMC_CENT_S	((u_char)0x02)
+
+/* SMC Event and Mask register.
+*/
+#define	SMCM_BRKE	((unsigned char)0x40)	/* When in UART Mode */
+#define	SMCM_BRK	((unsigned char)0x10)	/* When in UART Mode */
+#define	SMCM_TXE	((unsigned char)0x10)	/* When in Transparent Mode */
+#define	SMCM_BSY	((unsigned char)0x04)
+#define	SMCM_TX		((unsigned char)0x02)
+#define	SMCM_RX		((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST		((uint)0x00020000)
+#define CPM_BRG_EN		((uint)0x00010000)
+#define CPM_BRG_EXTC_INT	((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK2	((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK6	((uint)0x00008000)
+#define CPM_BRG_ATB		((uint)0x00002000)
+#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
+#define CPM_BRG_DIV16		((uint)0x00000001)
+
+/* SI Clock Route Register
+*/
+#define SICR_RCLK_SCC1_BRG1	((uint)0x00000000)
+#define SICR_TCLK_SCC1_BRG1	((uint)0x00000000)
+#define SICR_RCLK_SCC2_BRG2	((uint)0x00000800)
+#define SICR_TCLK_SCC2_BRG2	((uint)0x00000100)
+#define SICR_RCLK_SCC3_BRG3	((uint)0x00100000)
+#define SICR_TCLK_SCC3_BRG3	((uint)0x00020000)
+#define SICR_RCLK_SCC4_BRG4	((uint)0x18000000)
+#define SICR_TCLK_SCC4_BRG4	((uint)0x03000000)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP		((uint)0x00040000)
+#define SCC_GSMRH_GDE		((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
+#define SCC_GSMRH_REVD		((uint)0x00002000)
+#define SCC_GSMRH_TRX		((uint)0x00001000)
+#define SCC_GSMRH_TTX		((uint)0x00000800)
+#define SCC_GSMRH_CDP		((uint)0x00000400)
+#define SCC_GSMRH_CTSP		((uint)0x00000200)
+#define SCC_GSMRH_CDS		((uint)0x00000100)
+#define SCC_GSMRH_CTSS		((uint)0x00000080)
+#define SCC_GSMRH_TFL		((uint)0x00000040)
+#define SCC_GSMRH_RFW		((uint)0x00000020)
+#define SCC_GSMRH_TXSY		((uint)0x00000010)
+#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8		((uint)0x00000008)
+#define SCC_GSMRH_SYNL4		((uint)0x00000004)
+#define SCC_GSMRH_RTSM		((uint)0x00000002)
+#define SCC_GSMRH_RSYN		((uint)0x00000001)
+
+#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
+#define SCC_GSMRL_TCI		((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
+#define SCC_GSMRL_RINV		((uint)0x02000000)
+#define SCC_GSMRL_TINV		((uint)0x01000000)
+#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48	((uint)0x00800000)
+#define SCC_GSMRL_TPL_32	((uint)0x00600000)
+#define SCC_GSMRL_TPL_16	((uint)0x00400000)
+#define SCC_GSMRL_TPL_8		((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
+#define SCC_GSMRL_TPP_01	((uint)0x00100000)
+#define SCC_GSMRL_TPP_10	((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
+#define SCC_GSMRL_TEND		((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
+#define SCC_GSMRL_ENR		((uint)0x00000020)
+#define SCC_GSMRL_ENT		((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
+#define SCC_GSMRL_MODE_QMC	((uint)0x0000000a)
+#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
+
+#define SCC_TODR_TOD		((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define	SCCM_TXE	((unsigned char)0x10)
+#define	SCCM_BSY	((unsigned char)0x04)
+#define	SCCM_TX		((unsigned char)0x02)
+#define	SCCM_RX		((unsigned char)0x01)
+
+typedef struct scc_param {
+	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	scc_rfcr;	/* Rx function code */
+	u_char	scc_tfcr;	/* Tx function code */
+	ushort	scc_mrblr;	/* Max receive buffer length */
+	uint	scc_rstate;	/* Internal */
+	uint	scc_idp;	/* Internal */
+	ushort	scc_rbptr;	/* Internal */
+	ushort	scc_ibc;	/* Internal */
+	uint	scc_rxtmp;	/* Internal */
+	uint	scc_tstate;	/* Internal */
+	uint	scc_tdp;	/* Internal */
+	ushort	scc_tbptr;	/* Internal */
+	ushort	scc_tbc;	/* Internal */
+	uint	scc_txtmp;	/* Internal */
+	uint	scc_rcrc;	/* Internal */
+	uint	scc_tcrc;	/* Internal */
+} sccp_t;
+
+/* Function code bits.
+*/
+#define SCC_EB	((u_char)0x10)	/* Set big endian byte order */
+
+/* CPM Ethernet through SCCx.
+ */
+typedef struct scc_enet {
+	sccp_t	sen_genscc;
+	uint	sen_cpres;	/* Preset CRC */
+	uint	sen_cmask;	/* Constant mask for CRC */
+	uint	sen_crcec;	/* CRC Error counter */
+	uint	sen_alec;	/* alignment error counter */
+	uint	sen_disfc;	/* discard frame counter */
+	ushort	sen_pads;	/* Tx short frame pad character */
+	ushort	sen_retlim;	/* Retry limit threshold */
+	ushort	sen_retcnt;	/* Retry limit counter */
+	ushort	sen_maxflr;	/* maximum frame length register */
+	ushort	sen_minflr;	/* minimum frame length register */
+	ushort	sen_maxd1;	/* maximum DMA1 length */
+	ushort	sen_maxd2;	/* maximum DMA2 length */
+	ushort	sen_maxd;	/* Rx max DMA */
+	ushort	sen_dmacnt;	/* Rx DMA counter */
+	ushort	sen_maxb;	/* Max BD byte count */
+	ushort	sen_gaddr1;	/* Group address filter */
+	ushort	sen_gaddr2;
+	ushort	sen_gaddr3;
+	ushort	sen_gaddr4;
+	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf0rba;	/* Internal */
+	uint	sen_tbuf0crc;	/* Internal */
+	ushort	sen_tbuf0bcnt;	/* Internal */
+	ushort	sen_paddrh;	/* physical address (MSB) */
+	ushort	sen_paddrm;
+	ushort	sen_paddrl;	/* physical address (LSB) */
+	ushort	sen_pper;	/* persistence */
+	ushort	sen_rfbdptr;	/* Rx first BD pointer */
+	ushort	sen_tfbdptr;	/* Tx first BD pointer */
+	ushort	sen_tlbdptr;	/* Tx last BD pointer */
+	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf1rba;	/* Internal */
+	uint	sen_tbuf1crc;	/* Internal */
+	ushort	sen_tbuf1bcnt;	/* Internal */
+	ushort	sen_txlen;	/* Tx Frame length counter */
+	ushort	sen_iaddr1;	/* Individual address filter */
+	ushort	sen_iaddr2;
+	ushort	sen_iaddr3;
+	ushort	sen_iaddr4;
+	ushort	sen_boffcnt;	/* Backoff counter */
+
+	/* NOTE: Some versions of the manual have the following items
+	 * incorrectly documented.  Below is the proper order.
+	 */
+	ushort	sen_taddrh;	/* temp address (MSB) */
+	ushort	sen_taddrm;
+	ushort	sen_taddrl;	/* temp address (LSB) */
+} scc_enet_t;
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
+#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
+#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
+#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
+#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
+#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
+
+/* SCC Mode Register (PMSR) as used by Ethernet.
+*/
+#define SCC_PSMR_HBC	((ushort)0x8000)	/* Enable heartbeat */
+#define SCC_PSMR_FC	((ushort)0x4000)	/* Force collision */
+#define SCC_PSMR_RSH	((ushort)0x2000)	/* Receive short frames */
+#define SCC_PSMR_IAM	((ushort)0x1000)	/* Check individual hash */
+#define SCC_PSMR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
+#define SCC_PSMR_PRO	((ushort)0x0200)	/* Promiscuous mode */
+#define SCC_PSMR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
+#define SCC_PSMR_SBT	((ushort)0x0080)	/* Special backoff timer */
+#define SCC_PSMR_LPB	((ushort)0x0040)	/* Set Loopback mode */
+#define SCC_PSMR_SIP	((ushort)0x0020)	/* Sample Input Pins */
+#define SCC_PSMR_LCW	((ushort)0x0010)	/* Late collision window */
+#define SCC_PSMR_NIB22	((ushort)0x000a)	/* Start frame search */
+#define SCC_PSMR_FDE	((ushort)0x0001)	/* Full duplex enable */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+	sccp_t	scc_genscc;
+	char	res1[8];	/* Reserved */
+	ushort	scc_maxidl;	/* Maximum idle chars */
+	ushort	scc_idlc;	/* temp idle counter */
+	ushort	scc_brkcr;	/* Break count register */
+	ushort	scc_parec;	/* receive parity error counter */
+	ushort	scc_frmec;	/* receive framing error counter */
+	ushort	scc_nosec;	/* receive noise counter */
+	ushort	scc_brkec;	/* receive break condition counter */
+	ushort	scc_brkln;	/* last received break length */
+	ushort	scc_uaddr1;	/* UART address character 1 */
+	ushort	scc_uaddr2;	/* UART address character 2 */
+	ushort	scc_rtemp;	/* Temp storage */
+	ushort	scc_toseq;	/* Transmit out of sequence char */
+	ushort	scc_char1;	/* control character 1 */
+	ushort	scc_char2;	/* control character 2 */
+	ushort	scc_char3;	/* control character 3 */
+	ushort	scc_char4;	/* control character 4 */
+	ushort	scc_char5;	/* control character 5 */
+	ushort	scc_char6;	/* control character 6 */
+	ushort	scc_char7;	/* control character 7 */
+	ushort	scc_char8;	/* control character 8 */
+	ushort	scc_rccm;	/* receive control character mask */
+	ushort	scc_rccr;	/* receive control character register */
+	ushort	scc_rlbc;	/* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR		((ushort)0x1000)
+#define UART_SCCM_GLT		((ushort)0x0800)
+#define UART_SCCM_AB		((ushort)0x0200)
+#define UART_SCCM_IDL		((ushort)0x0100)
+#define UART_SCCM_GRA		((ushort)0x0080)
+#define UART_SCCM_BRKE		((ushort)0x0040)
+#define UART_SCCM_BRKS		((ushort)0x0020)
+#define UART_SCCM_CCR		((ushort)0x0008)
+#define UART_SCCM_BSY		((ushort)0x0004)
+#define UART_SCCM_TX		((ushort)0x0002)
+#define UART_SCCM_RX		((ushort)0x0001)
+
+/* The SCC PMSR when used as a UART.
+*/
+#define SCU_PSMR_FLC		((ushort)0x8000)
+#define SCU_PSMR_SL		((ushort)0x4000)
+#define SCU_PSMR_CL		((ushort)0x3000)
+#define SCU_PSMR_UM		((ushort)0x0c00)
+#define SCU_PSMR_FRZ		((ushort)0x0200)
+#define SCU_PSMR_RZS		((ushort)0x0100)
+#define SCU_PSMR_SYN		((ushort)0x0080)
+#define SCU_PSMR_DRT		((ushort)0x0040)
+#define SCU_PSMR_PEN		((ushort)0x0010)
+#define SCU_PSMR_RPM		((ushort)0x000c)
+#define SCU_PSMR_REVP		((ushort)0x0008)
+#define SCU_PSMR_TPM		((ushort)0x0003)
+#define SCU_PSMR_TEVP		((ushort)0x0002)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+	sccp_t	st_genscc;
+	uint	st_cpres;	/* Preset CRC */
+	uint	st_cmask;	/* Constant mask for CRC */
+} scc_trans_t;
+
+/* IIC parameter RAM.
+*/
+typedef struct iic {
+	ushort	iic_rbase;	/* Rx Buffer descriptor base address */
+	ushort	iic_tbase;	/* Tx Buffer descriptor base address */
+	u_char	iic_rfcr;	/* Rx function code */
+	u_char	iic_tfcr;	/* Tx function code */
+	ushort	iic_mrblr;	/* Max receive buffer length */
+	uint	iic_rstate;	/* Internal */
+	uint	iic_rdp;	/* Internal */
+	ushort	iic_rbptr;	/* Internal */
+	ushort	iic_rbc;	/* Internal */
+	uint	iic_rxtmp;	/* Internal */
+	uint	iic_tstate;	/* Internal */
+	uint	iic_tdp;	/* Internal */
+	ushort	iic_tbptr;	/* Internal */
+	ushort	iic_tbc;	/* Internal */
+	uint	iic_txtmp;	/* Internal */
+	char	res1[4];	/* Reserved */
+	ushort	iic_rpbase;	/* Relocation pointer */
+	char	res2[2];	/* Reserved */
+} iic_t;
+
+/* SPI parameter RAM.
+*/
+typedef struct spi {
+	ushort	spi_rbase;	/* Rx Buffer descriptor base address */
+	ushort	spi_tbase;	/* Tx Buffer descriptor base address */
+	u_char	spi_rfcr;	/* Rx function code */
+	u_char	spi_tfcr;	/* Tx function code */
+	ushort	spi_mrblr;	/* Max receive buffer length */
+	uint	spi_rstate;	/* Internal */
+	uint	spi_rdp;	/* Internal */
+	ushort	spi_rbptr;	/* Internal */
+	ushort	spi_rbc;	/* Internal */
+	uint	spi_rxtmp;	/* Internal */
+	uint	spi_tstate;	/* Internal */
+	uint	spi_tdp;	/* Internal */
+	ushort	spi_tbptr;	/* Internal */
+	ushort	spi_tbc;	/* Internal */
+	uint	spi_txtmp;	/* Internal */
+	uint	spi_res;
+	ushort	spi_rpbase;	/* Relocation pointer */
+	ushort	spi_res2;
+} spi_t;
+
+/* SPI Mode register.
+*/
+#define SPMODE_LOOP	((ushort)0x4000)	/* Loopback */
+#define SPMODE_CI	((ushort)0x2000)	/* Clock Invert */
+#define SPMODE_CP	((ushort)0x1000)	/* Clock Phase */
+#define SPMODE_DIV16	((ushort)0x0800)	/* BRG/16 mode */
+#define SPMODE_REV	((ushort)0x0400)	/* Reversed Data */
+#define SPMODE_MSTR	((ushort)0x0200)	/* SPI Master */
+#define SPMODE_EN	((ushort)0x0100)	/* Enable */
+#define SPMODE_LENMSK	((ushort)0x00f0)	/* character length */
+#define SPMODE_LEN4	((ushort)0x0030)	/*  4 bits per char */
+#define SPMODE_LEN8	((ushort)0x0070)	/*  8 bits per char */
+#define SPMODE_LEN16	((ushort)0x00f0)	/* 16 bits per char */
+#define SPMODE_PMMSK	((ushort)0x000f)	/* prescale modulus */
+
+/* SPIE fields */
+#define SPIE_MME	0x20
+#define SPIE_TXE	0x10
+#define SPIE_BSY	0x04
+#define SPIE_TXB	0x02
+#define SPIE_RXB	0x01
+
+/*
+ * RISC Controller Configuration Register definitons
+ */
+#define RCCR_TIME	0x8000			/* RISC Timer Enable */
+#define RCCR_TIMEP(t)	(((t) & 0x3F)<<8)	/* RISC Timer Period */
+#define RCCR_TIME_MASK	0x00FF			/* not RISC Timer related bits */
+
+/* RISC Timer Parameter RAM offset */
+#define PROFF_RTMR	((uint)0x01B0)
+
+typedef struct risc_timer_pram {
+	unsigned short	tm_base;	/* RISC Timer Table Base Address */
+	unsigned short	tm_ptr;		/* RISC Timer Table Pointer (internal) */
+	unsigned short	r_tmr;		/* RISC Timer Mode Register */
+	unsigned short	r_tmv;		/* RISC Timer Valid Register */
+	unsigned long	tm_cmd;		/* RISC Timer Command Register */
+	unsigned long	tm_cnt;		/* RISC Timer Internal Count */
+} rt_pram_t;
+
+/* Bits in RISC Timer Command Register */
+#define TM_CMD_VALID	0x80000000	/* Valid - Enables the timer */
+#define TM_CMD_RESTART	0x40000000	/* Restart - for automatic restart */
+#define TM_CMD_PWM	0x20000000	/* Run in Pulse Width Modulation Mode */
+#define TM_CMD_NUM(n)	(((n)&0xF)<<16)	/* Timer Number */
+#define TM_CMD_PERIOD(p) ((p)&0xFFFF)	/* Timer Period */
+
+/* CPM interrupts.  There are nearly 32 interrupts generated by CPM
+ * channels or devices.  All of these are presented to the PPC core
+ * as a single interrupt.  The CPM interrupt handler dispatches its
+ * own handlers, in a similar fashion to the PPC core handler.  We
+ * use the table as defined in the manuals (i.e. no special high
+ * priority and SCC1 == SCCa, etc...).
+ */
+#define CPMVEC_NR		32
+#define	CPMVEC_PIO_PC15		((ushort)0x1f)
+#define	CPMVEC_SCC1		((ushort)0x1e)
+#define	CPMVEC_SCC2		((ushort)0x1d)
+#define	CPMVEC_SCC3		((ushort)0x1c)
+#define	CPMVEC_SCC4		((ushort)0x1b)
+#define	CPMVEC_PIO_PC14		((ushort)0x1a)
+#define	CPMVEC_TIMER1		((ushort)0x19)
+#define	CPMVEC_PIO_PC13		((ushort)0x18)
+#define	CPMVEC_PIO_PC12		((ushort)0x17)
+#define	CPMVEC_SDMA_CB_ERR	((ushort)0x16)
+#define CPMVEC_IDMA1		((ushort)0x15)
+#define CPMVEC_IDMA2		((ushort)0x14)
+#define CPMVEC_TIMER2		((ushort)0x12)
+#define CPMVEC_RISCTIMER	((ushort)0x11)
+#define CPMVEC_I2C		((ushort)0x10)
+#define	CPMVEC_PIO_PC11		((ushort)0x0f)
+#define	CPMVEC_PIO_PC10		((ushort)0x0e)
+#define CPMVEC_TIMER3		((ushort)0x0c)
+#define	CPMVEC_PIO_PC9		((ushort)0x0b)
+#define	CPMVEC_PIO_PC8		((ushort)0x0a)
+#define	CPMVEC_PIO_PC7		((ushort)0x09)
+#define CPMVEC_TIMER4		((ushort)0x07)
+#define	CPMVEC_PIO_PC6		((ushort)0x06)
+#define	CPMVEC_SPI		((ushort)0x05)
+#define	CPMVEC_SMC1		((ushort)0x04)
+#define	CPMVEC_SMC2		((ushort)0x03)
+#define	CPMVEC_PIO_PC5		((ushort)0x02)
+#define	CPMVEC_PIO_PC4		((ushort)0x01)
+#define	CPMVEC_ERROR		((ushort)0x00)
+
+/* CPM interrupt configuration vector.
+*/
+#define	CICR_SCD_SCC4		((uint)0x00c00000)	/* SCC4 @ SCCd */
+#define	CICR_SCC_SCC3		((uint)0x00200000)	/* SCC3 @ SCCc */
+#define	CICR_SCB_SCC2		((uint)0x00040000)	/* SCC2 @ SCCb */
+#define	CICR_SCA_SCC1		((uint)0x00000000)	/* SCC1 @ SCCa */
+#define CICR_IRL_MASK		((uint)0x0000e000)	/* Core interrupt */
+#define CICR_HP_MASK		((uint)0x00001f00)	/* Hi-pri int. */
+#define CICR_IEN		((uint)0x00000080)	/* Int. enable */
+#define CICR_SPS		((uint)0x00000001)	/* SCC Spread */
+
+#define IMAP_ADDR		(get_immrbase())
+
+#define CPM_PIN_INPUT     0
+#define CPM_PIN_OUTPUT    1
+#define CPM_PIN_PRIMARY   0
+#define CPM_PIN_SECONDARY 2
+#define CPM_PIN_GPIO      4
+#define CPM_PIN_OPENDRAIN 8
+
+enum cpm_port {
+	CPM_PORTA,
+	CPM_PORTB,
+	CPM_PORTC,
+	CPM_PORTD,
+	CPM_PORTE,
+};
+
+void cpm1_set_pin(enum cpm_port port, int pin, int flags);
+
+enum cpm_clk_dir {
+	CPM_CLK_RX,
+	CPM_CLK_TX,
+	CPM_CLK_RTX
+};
+
+enum cpm_clk_target {
+	CPM_CLK_SCC1,
+	CPM_CLK_SCC2,
+	CPM_CLK_SCC3,
+	CPM_CLK_SCC4,
+	CPM_CLK_SMC1,
+	CPM_CLK_SMC2,
+};
+
+enum cpm_clk {
+	CPM_BRG1,	/* Baud Rate Generator  1 */
+	CPM_BRG2,	/* Baud Rate Generator  2 */
+	CPM_BRG3,	/* Baud Rate Generator  3 */
+	CPM_BRG4,	/* Baud Rate Generator  4 */
+	CPM_CLK1,	/* Clock  1 */
+	CPM_CLK2,	/* Clock  2 */
+	CPM_CLK3,	/* Clock  3 */
+	CPM_CLK4,	/* Clock  4 */
+	CPM_CLK5,	/* Clock  5 */
+	CPM_CLK6,	/* Clock  6 */
+	CPM_CLK7,	/* Clock  7 */
+	CPM_CLK8,	/* Clock  8 */
+};
+
+int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode);
+
+#endif /* __CPM1__ */
diff --git a/arch/powerpc/include/asm/cpm2.h b/arch/powerpc/include/asm/cpm2.h
new file mode 100644
index 000000000000..2a6fa0183ac9
--- /dev/null
+++ b/arch/powerpc/include/asm/cpm2.h
@@ -0,0 +1,1195 @@
+/*
+ * Communication Processor Module v2.
+ *
+ * This file contains structures and information for the communication
+ * processor channels found in the dual port RAM or parameter RAM.
+ * All CPM control and status is available through the CPM2 internal
+ * memory map.  See immap_cpm2.h for details.
+ */
+#ifdef __KERNEL__
+#ifndef __CPM2__
+#define __CPM2__
+
+#include <asm/immap_cpm2.h>
+#include <asm/cpm.h>
+#include <sysdev/fsl_soc.h>
+
+#ifdef CONFIG_PPC_85xx
+#define CPM_MAP_ADDR (get_immrbase() + 0x80000)
+#endif
+
+/* CPM Command register.
+*/
+#define CPM_CR_RST	((uint)0x80000000)
+#define CPM_CR_PAGE	((uint)0x7c000000)
+#define CPM_CR_SBLOCK	((uint)0x03e00000)
+#define CPM_CR_FLG	((uint)0x00010000)
+#define CPM_CR_MCN	((uint)0x00003fc0)
+#define CPM_CR_OPCODE	((uint)0x0000000f)
+
+/* Device sub-block and page codes.
+*/
+#define CPM_CR_SCC1_SBLOCK	(0x04)
+#define CPM_CR_SCC2_SBLOCK	(0x05)
+#define CPM_CR_SCC3_SBLOCK	(0x06)
+#define CPM_CR_SCC4_SBLOCK	(0x07)
+#define CPM_CR_SMC1_SBLOCK	(0x08)
+#define CPM_CR_SMC2_SBLOCK	(0x09)
+#define CPM_CR_SPI_SBLOCK	(0x0a)
+#define CPM_CR_I2C_SBLOCK	(0x0b)
+#define CPM_CR_TIMER_SBLOCK	(0x0f)
+#define CPM_CR_RAND_SBLOCK	(0x0e)
+#define CPM_CR_FCC1_SBLOCK	(0x10)
+#define CPM_CR_FCC2_SBLOCK	(0x11)
+#define CPM_CR_FCC3_SBLOCK	(0x12)
+#define CPM_CR_IDMA1_SBLOCK	(0x14)
+#define CPM_CR_IDMA2_SBLOCK	(0x15)
+#define CPM_CR_IDMA3_SBLOCK	(0x16)
+#define CPM_CR_IDMA4_SBLOCK	(0x17)
+#define CPM_CR_MCC1_SBLOCK	(0x1c)
+
+#define CPM_CR_FCC_SBLOCK(x)	(x + 0x10)
+
+#define CPM_CR_SCC1_PAGE	(0x00)
+#define CPM_CR_SCC2_PAGE	(0x01)
+#define CPM_CR_SCC3_PAGE	(0x02)
+#define CPM_CR_SCC4_PAGE	(0x03)
+#define CPM_CR_SMC1_PAGE	(0x07)
+#define CPM_CR_SMC2_PAGE	(0x08)
+#define CPM_CR_SPI_PAGE		(0x09)
+#define CPM_CR_I2C_PAGE		(0x0a)
+#define CPM_CR_TIMER_PAGE	(0x0a)
+#define CPM_CR_RAND_PAGE	(0x0a)
+#define CPM_CR_FCC1_PAGE	(0x04)
+#define CPM_CR_FCC2_PAGE	(0x05)
+#define CPM_CR_FCC3_PAGE	(0x06)
+#define CPM_CR_IDMA1_PAGE	(0x07)
+#define CPM_CR_IDMA2_PAGE	(0x08)
+#define CPM_CR_IDMA3_PAGE	(0x09)
+#define CPM_CR_IDMA4_PAGE	(0x0a)
+#define CPM_CR_MCC1_PAGE	(0x07)
+#define CPM_CR_MCC2_PAGE	(0x08)
+
+#define CPM_CR_FCC_PAGE(x)	(x + 0x04)
+
+/* CPM2-specific opcodes (see cpm.h for common opcodes)
+*/
+#define CPM_CR_START_IDMA	((ushort)0x0009)
+
+#define mk_cr_cmd(PG, SBC, MCN, OP) \
+	((PG << 26) | (SBC << 21) | (MCN << 6) | OP)
+
+/* The number of pages of host memory we allocate for CPM.  This is
+ * done early in kernel initialization to get physically contiguous
+ * pages.
+ */
+#define NUM_CPM_HOST_PAGES	2
+
+/* Export the base address of the communication processor registers
+ * and dual port ram.
+ */
+extern cpm_cpm2_t __iomem *cpmp; /* Pointer to comm processor */
+
+#define cpm_dpalloc cpm_muram_alloc
+#define cpm_dpfree cpm_muram_free
+#define cpm_dpram_addr cpm_muram_addr
+
+extern void cpm2_reset(void);
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST		((uint)0x00020000)
+#define CPM_BRG_EN		((uint)0x00010000)
+#define CPM_BRG_EXTC_INT	((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK3_9	((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK5_15	((uint)0x00008000)
+#define CPM_BRG_ATB		((uint)0x00002000)
+#define CPM_BRG_CD_MASK		((uint)0x00001ffe)
+#define CPM_BRG_DIV16		((uint)0x00000001)
+
+#define CPM2_BRG_INT_CLK	(get_brgfreq())
+#define CPM2_BRG_UART_CLK	(CPM2_BRG_INT_CLK/16)
+
+extern void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src);
+
+/* This function is used by UARTS, or anything else that uses a 16x
+ * oversampled clock.
+ */
+static inline void cpm_setbrg(uint brg, uint rate)
+{
+	__cpm2_setbrg(brg, rate, CPM2_BRG_UART_CLK, 0, CPM_BRG_EXTC_INT);
+}
+
+/* This function is used to set high speed synchronous baud rate
+ * clocks.
+ */
+static inline void cpm2_fastbrg(uint brg, uint rate, int div16)
+{
+	__cpm2_setbrg(brg, rate, CPM2_BRG_INT_CLK, div16, CPM_BRG_EXTC_INT);
+}
+
+/* Function code bits, usually generic to devices.
+*/
+#define CPMFCR_GBL	((u_char)0x20)	/* Set memory snooping */
+#define CPMFCR_EB	((u_char)0x10)	/* Set big endian byte order */
+#define CPMFCR_TC2	((u_char)0x04)	/* Transfer code 2 value */
+#define CPMFCR_DTB	((u_char)0x02)	/* Use local bus for data when set */
+#define CPMFCR_BDB	((u_char)0x01)	/* Use local bus for BD when set */
+
+/* Parameter RAM offsets from the base.
+*/
+#define PROFF_SCC1		((uint)0x8000)
+#define PROFF_SCC2		((uint)0x8100)
+#define PROFF_SCC3		((uint)0x8200)
+#define PROFF_SCC4		((uint)0x8300)
+#define PROFF_FCC1		((uint)0x8400)
+#define PROFF_FCC2		((uint)0x8500)
+#define PROFF_FCC3		((uint)0x8600)
+#define PROFF_MCC1		((uint)0x8700)
+#define PROFF_SMC1_BASE		((uint)0x87fc)
+#define PROFF_IDMA1_BASE	((uint)0x87fe)
+#define PROFF_MCC2		((uint)0x8800)
+#define PROFF_SMC2_BASE		((uint)0x88fc)
+#define PROFF_IDMA2_BASE	((uint)0x88fe)
+#define PROFF_SPI_BASE		((uint)0x89fc)
+#define PROFF_IDMA3_BASE	((uint)0x89fe)
+#define PROFF_TIMERS		((uint)0x8ae0)
+#define PROFF_REVNUM		((uint)0x8af0)
+#define PROFF_RAND		((uint)0x8af8)
+#define PROFF_I2C_BASE		((uint)0x8afc)
+#define PROFF_IDMA4_BASE	((uint)0x8afe)
+
+#define PROFF_SCC_SIZE		((uint)0x100)
+#define PROFF_FCC_SIZE		((uint)0x100)
+#define PROFF_SMC_SIZE		((uint)64)
+
+/* The SMCs are relocated to any of the first eight DPRAM pages.
+ * We will fix these at the first locations of DPRAM, until we
+ * get some microcode patches :-).
+ * The parameter ram space for the SMCs is fifty-some bytes, and
+ * they are required to start on a 64 byte boundary.
+ */
+#define PROFF_SMC1	(0)
+#define PROFF_SMC2	(64)
+
+
+/* Define enough so I can at least use the serial port as a UART.
+ */
+typedef struct smc_uart {
+	ushort	smc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	smc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	smc_rfcr;	/* Rx function code */
+	u_char	smc_tfcr;	/* Tx function code */
+	ushort	smc_mrblr;	/* Max receive buffer length */
+	uint	smc_rstate;	/* Internal */
+	uint	smc_idp;	/* Internal */
+	ushort	smc_rbptr;	/* Internal */
+	ushort	smc_ibc;	/* Internal */
+	uint	smc_rxtmp;	/* Internal */
+	uint	smc_tstate;	/* Internal */
+	uint	smc_tdp;	/* Internal */
+	ushort	smc_tbptr;	/* Internal */
+	ushort	smc_tbc;	/* Internal */
+	uint	smc_txtmp;	/* Internal */
+	ushort	smc_maxidl;	/* Maximum idle characters */
+	ushort	smc_tmpidl;	/* Temporary idle counter */
+	ushort	smc_brklen;	/* Last received break length */
+	ushort	smc_brkec;	/* rcv'd break condition counter */
+	ushort	smc_brkcr;	/* xmt break count register */
+	ushort	smc_rmask;	/* Temporary bit mask */
+	uint	smc_stmp;	/* SDMA Temp */
+} smc_uart_t;
+
+/* SMC uart mode register (Internal memory map).
+*/
+#define SMCMR_REN	((ushort)0x0001)
+#define SMCMR_TEN	((ushort)0x0002)
+#define SMCMR_DM	((ushort)0x000c)
+#define SMCMR_SM_GCI	((ushort)0x0000)
+#define SMCMR_SM_UART	((ushort)0x0020)
+#define SMCMR_SM_TRANS	((ushort)0x0030)
+#define SMCMR_SM_MASK	((ushort)0x0030)
+#define SMCMR_PM_EVEN	((ushort)0x0100)	/* Even parity, else odd */
+#define SMCMR_REVD	SMCMR_PM_EVEN
+#define SMCMR_PEN	((ushort)0x0200)	/* Parity enable */
+#define SMCMR_BS	SMCMR_PEN
+#define SMCMR_SL	((ushort)0x0400)	/* Two stops, else one */
+#define SMCR_CLEN_MASK	((ushort)0x7800)	/* Character length */
+#define smcr_mk_clen(C)	(((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC Event and Mask register.
+*/
+#define SMCM_BRKE       ((unsigned char)0x40)   /* When in UART Mode */
+#define SMCM_BRK        ((unsigned char)0x10)   /* When in UART Mode */
+#define SMCM_TXE	((unsigned char)0x10)
+#define SMCM_BSY	((unsigned char)0x04)
+#define SMCM_TX		((unsigned char)0x02)
+#define SMCM_RX		((unsigned char)0x01)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP		((uint)0x00040000)
+#define SCC_GSMRH_GDE		((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT	((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC	((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC	((uint)0x00000000)
+#define SCC_GSMRH_REVD		((uint)0x00002000)
+#define SCC_GSMRH_TRX		((uint)0x00001000)
+#define SCC_GSMRH_TTX		((uint)0x00000800)
+#define SCC_GSMRH_CDP		((uint)0x00000400)
+#define SCC_GSMRH_CTSP		((uint)0x00000200)
+#define SCC_GSMRH_CDS		((uint)0x00000100)
+#define SCC_GSMRH_CTSS		((uint)0x00000080)
+#define SCC_GSMRH_TFL		((uint)0x00000040)
+#define SCC_GSMRH_RFW		((uint)0x00000020)
+#define SCC_GSMRH_TXSY		((uint)0x00000010)
+#define SCC_GSMRH_SYNL16	((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8		((uint)0x00000008)
+#define SCC_GSMRH_SYNL4		((uint)0x00000004)
+#define SCC_GSMRH_RTSM		((uint)0x00000002)
+#define SCC_GSMRH_RSYN		((uint)0x00000001)
+
+#define SCC_GSMRL_SIR		((uint)0x80000000)	/* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE	((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG	((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS	((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH	((uint)0x00000000)
+#define SCC_GSMRL_TCI		((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3	((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4	((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14	((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF	((uint)0x00000000)
+#define SCC_GSMRL_RINV		((uint)0x02000000)
+#define SCC_GSMRL_TINV		((uint)0x01000000)
+#define SCC_GSMRL_TPL_128	((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64	((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48	((uint)0x00800000)
+#define SCC_GSMRL_TPL_32	((uint)0x00600000)
+#define SCC_GSMRL_TPL_16	((uint)0x00400000)
+#define SCC_GSMRL_TPL_8		((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE	((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1	((uint)0x00180000)
+#define SCC_GSMRL_TPP_01	((uint)0x00100000)
+#define SCC_GSMRL_TPP_10	((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS	((uint)0x00000000)
+#define SCC_GSMRL_TEND		((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32	((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16	((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8	((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32	((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16	((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8	((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1	((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN	((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH	((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0	((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI	((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN	((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH	((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0	((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI	((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ	((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE	((uint)0x000000c0)	/* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO	((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP	((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM	((uint)0x00000000)
+#define SCC_GSMRL_ENR		((uint)0x00000020)
+#define SCC_GSMRL_ENT		((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET	((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP	((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC	((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14	((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC	((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS	((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART	((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7	((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK	((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC	((uint)0x00000000)
+
+#define SCC_TODR_TOD		((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define SCCM_TXE	((unsigned char)0x10)
+#define SCCM_BSY	((unsigned char)0x04)
+#define SCCM_TX		((unsigned char)0x02)
+#define SCCM_RX		((unsigned char)0x01)
+
+typedef struct scc_param {
+	ushort	scc_rbase;	/* Rx Buffer descriptor base address */
+	ushort	scc_tbase;	/* Tx Buffer descriptor base address */
+	u_char	scc_rfcr;	/* Rx function code */
+	u_char	scc_tfcr;	/* Tx function code */
+	ushort	scc_mrblr;	/* Max receive buffer length */
+	uint	scc_rstate;	/* Internal */
+	uint	scc_idp;	/* Internal */
+	ushort	scc_rbptr;	/* Internal */
+	ushort	scc_ibc;	/* Internal */
+	uint	scc_rxtmp;	/* Internal */
+	uint	scc_tstate;	/* Internal */
+	uint	scc_tdp;	/* Internal */
+	ushort	scc_tbptr;	/* Internal */
+	ushort	scc_tbc;	/* Internal */
+	uint	scc_txtmp;	/* Internal */
+	uint	scc_rcrc;	/* Internal */
+	uint	scc_tcrc;	/* Internal */
+} sccp_t;
+
+/* CPM Ethernet through SCC1.
+ */
+typedef struct scc_enet {
+	sccp_t	sen_genscc;
+	uint	sen_cpres;	/* Preset CRC */
+	uint	sen_cmask;	/* Constant mask for CRC */
+	uint	sen_crcec;	/* CRC Error counter */
+	uint	sen_alec;	/* alignment error counter */
+	uint	sen_disfc;	/* discard frame counter */
+	ushort	sen_pads;	/* Tx short frame pad character */
+	ushort	sen_retlim;	/* Retry limit threshold */
+	ushort	sen_retcnt;	/* Retry limit counter */
+	ushort	sen_maxflr;	/* maximum frame length register */
+	ushort	sen_minflr;	/* minimum frame length register */
+	ushort	sen_maxd1;	/* maximum DMA1 length */
+	ushort	sen_maxd2;	/* maximum DMA2 length */
+	ushort	sen_maxd;	/* Rx max DMA */
+	ushort	sen_dmacnt;	/* Rx DMA counter */
+	ushort	sen_maxb;	/* Max BD byte count */
+	ushort	sen_gaddr1;	/* Group address filter */
+	ushort	sen_gaddr2;
+	ushort	sen_gaddr3;
+	ushort	sen_gaddr4;
+	uint	sen_tbuf0data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf0data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf0rba;	/* Internal */
+	uint	sen_tbuf0crc;	/* Internal */
+	ushort	sen_tbuf0bcnt;	/* Internal */
+	ushort	sen_paddrh;	/* physical address (MSB) */
+	ushort	sen_paddrm;
+	ushort	sen_paddrl;	/* physical address (LSB) */
+	ushort	sen_pper;	/* persistence */
+	ushort	sen_rfbdptr;	/* Rx first BD pointer */
+	ushort	sen_tfbdptr;	/* Tx first BD pointer */
+	ushort	sen_tlbdptr;	/* Tx last BD pointer */
+	uint	sen_tbuf1data0;	/* Save area 0 - current frame */
+	uint	sen_tbuf1data1;	/* Save area 1 - current frame */
+	uint	sen_tbuf1rba;	/* Internal */
+	uint	sen_tbuf1crc;	/* Internal */
+	ushort	sen_tbuf1bcnt;	/* Internal */
+	ushort	sen_txlen;	/* Tx Frame length counter */
+	ushort	sen_iaddr1;	/* Individual address filter */
+	ushort	sen_iaddr2;
+	ushort	sen_iaddr3;
+	ushort	sen_iaddr4;
+	ushort	sen_boffcnt;	/* Backoff counter */
+
+	/* NOTE: Some versions of the manual have the following items
+	 * incorrectly documented.  Below is the proper order.
+	 */
+	ushort	sen_taddrh;	/* temp address (MSB) */
+	ushort	sen_taddrm;
+	ushort	sen_taddrl;	/* temp address (LSB) */
+} scc_enet_t;
+
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
+#define SCCE_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
+#define SCCE_ENET_RXF	((ushort)0x0008)	/* Full frame received */
+#define SCCE_ENET_BSY	((ushort)0x0004)	/* All incoming buffers full */
+#define SCCE_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
+#define SCCE_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
+
+/* SCC Mode Register (PSMR) as used by Ethernet.
+*/
+#define SCC_PSMR_HBC	((ushort)0x8000)	/* Enable heartbeat */
+#define SCC_PSMR_FC	((ushort)0x4000)	/* Force collision */
+#define SCC_PSMR_RSH	((ushort)0x2000)	/* Receive short frames */
+#define SCC_PSMR_IAM	((ushort)0x1000)	/* Check individual hash */
+#define SCC_PSMR_ENCRC	((ushort)0x0800)	/* Ethernet CRC mode */
+#define SCC_PSMR_PRO	((ushort)0x0200)	/* Promiscuous mode */
+#define SCC_PSMR_BRO	((ushort)0x0100)	/* Catch broadcast pkts */
+#define SCC_PSMR_SBT	((ushort)0x0080)	/* Special backoff timer */
+#define SCC_PSMR_LPB	((ushort)0x0040)	/* Set Loopback mode */
+#define SCC_PSMR_SIP	((ushort)0x0020)	/* Sample Input Pins */
+#define SCC_PSMR_LCW	((ushort)0x0010)	/* Late collision window */
+#define SCC_PSMR_NIB22	((ushort)0x000a)	/* Start frame search */
+#define SCC_PSMR_FDE	((ushort)0x0001)	/* Full duplex enable */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+	sccp_t	scc_genscc;
+	uint	scc_res1;	/* Reserved */
+	uint	scc_res2;	/* Reserved */
+	ushort	scc_maxidl;	/* Maximum idle chars */
+	ushort	scc_idlc;	/* temp idle counter */
+	ushort	scc_brkcr;	/* Break count register */
+	ushort	scc_parec;	/* receive parity error counter */
+	ushort	scc_frmec;	/* receive framing error counter */
+	ushort	scc_nosec;	/* receive noise counter */
+	ushort	scc_brkec;	/* receive break condition counter */
+	ushort	scc_brkln;	/* last received break length */
+	ushort	scc_uaddr1;	/* UART address character 1 */
+	ushort	scc_uaddr2;	/* UART address character 2 */
+	ushort	scc_rtemp;	/* Temp storage */
+	ushort	scc_toseq;	/* Transmit out of sequence char */
+	ushort	scc_char1;	/* control character 1 */
+	ushort	scc_char2;	/* control character 2 */
+	ushort	scc_char3;	/* control character 3 */
+	ushort	scc_char4;	/* control character 4 */
+	ushort	scc_char5;	/* control character 5 */
+	ushort	scc_char6;	/* control character 6 */
+	ushort	scc_char7;	/* control character 7 */
+	ushort	scc_char8;	/* control character 8 */
+	ushort	scc_rccm;	/* receive control character mask */
+	ushort	scc_rccr;	/* receive control character register */
+	ushort	scc_rlbc;	/* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR		((ushort)0x1000)
+#define UART_SCCM_GLT		((ushort)0x0800)
+#define UART_SCCM_AB		((ushort)0x0200)
+#define UART_SCCM_IDL		((ushort)0x0100)
+#define UART_SCCM_GRA		((ushort)0x0080)
+#define UART_SCCM_BRKE		((ushort)0x0040)
+#define UART_SCCM_BRKS		((ushort)0x0020)
+#define UART_SCCM_CCR		((ushort)0x0008)
+#define UART_SCCM_BSY		((ushort)0x0004)
+#define UART_SCCM_TX		((ushort)0x0002)
+#define UART_SCCM_RX		((ushort)0x0001)
+
+/* The SCC PSMR when used as a UART.
+*/
+#define SCU_PSMR_FLC		((ushort)0x8000)
+#define SCU_PSMR_SL		((ushort)0x4000)
+#define SCU_PSMR_CL		((ushort)0x3000)
+#define SCU_PSMR_UM		((ushort)0x0c00)
+#define SCU_PSMR_FRZ		((ushort)0x0200)
+#define SCU_PSMR_RZS		((ushort)0x0100)
+#define SCU_PSMR_SYN		((ushort)0x0080)
+#define SCU_PSMR_DRT		((ushort)0x0040)
+#define SCU_PSMR_PEN		((ushort)0x0010)
+#define SCU_PSMR_RPM		((ushort)0x000c)
+#define SCU_PSMR_REVP		((ushort)0x0008)
+#define SCU_PSMR_TPM		((ushort)0x0003)
+#define SCU_PSMR_TEVP		((ushort)0x0002)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+	sccp_t	st_genscc;
+	uint	st_cpres;	/* Preset CRC */
+	uint	st_cmask;	/* Constant mask for CRC */
+} scc_trans_t;
+
+/* How about some FCCs.....
+*/
+#define FCC_GFMR_DIAG_NORM	((uint)0x00000000)
+#define FCC_GFMR_DIAG_LE	((uint)0x40000000)
+#define FCC_GFMR_DIAG_AE	((uint)0x80000000)
+#define FCC_GFMR_DIAG_ALE	((uint)0xc0000000)
+#define FCC_GFMR_TCI		((uint)0x20000000)
+#define FCC_GFMR_TRX		((uint)0x10000000)
+#define FCC_GFMR_TTX		((uint)0x08000000)
+#define FCC_GFMR_TTX		((uint)0x08000000)
+#define FCC_GFMR_CDP		((uint)0x04000000)
+#define FCC_GFMR_CTSP		((uint)0x02000000)
+#define FCC_GFMR_CDS		((uint)0x01000000)
+#define FCC_GFMR_CTSS		((uint)0x00800000)
+#define FCC_GFMR_SYNL_NONE	((uint)0x00000000)
+#define FCC_GFMR_SYNL_AUTO	((uint)0x00004000)
+#define FCC_GFMR_SYNL_8		((uint)0x00008000)
+#define FCC_GFMR_SYNL_16	((uint)0x0000c000)
+#define FCC_GFMR_RTSM		((uint)0x00002000)
+#define FCC_GFMR_RENC_NRZ	((uint)0x00000000)
+#define FCC_GFMR_RENC_NRZI	((uint)0x00000800)
+#define FCC_GFMR_REVD		((uint)0x00000400)
+#define FCC_GFMR_TENC_NRZ	((uint)0x00000000)
+#define FCC_GFMR_TENC_NRZI	((uint)0x00000100)
+#define FCC_GFMR_TCRC_16	((uint)0x00000000)
+#define FCC_GFMR_TCRC_32	((uint)0x00000080)
+#define FCC_GFMR_ENR		((uint)0x00000020)
+#define FCC_GFMR_ENT		((uint)0x00000010)
+#define FCC_GFMR_MODE_ENET	((uint)0x0000000c)
+#define FCC_GFMR_MODE_ATM	((uint)0x0000000a)
+#define FCC_GFMR_MODE_HDLC	((uint)0x00000000)
+
+/* Generic FCC parameter ram.
+*/
+typedef struct fcc_param {
+	ushort	fcc_riptr;	/* Rx Internal temp pointer */
+	ushort	fcc_tiptr;	/* Tx Internal temp pointer */
+	ushort	fcc_res1;
+	ushort	fcc_mrblr;	/* Max receive buffer length, mod 32 bytes */
+	uint	fcc_rstate;	/* Upper byte is Func code, must be set */
+	uint	fcc_rbase;	/* Receive BD base */
+	ushort	fcc_rbdstat;	/* RxBD status */
+	ushort	fcc_rbdlen;	/* RxBD down counter */
+	uint	fcc_rdptr;	/* RxBD internal data pointer */
+	uint	fcc_tstate;	/* Upper byte is Func code, must be set */
+	uint	fcc_tbase;	/* Transmit BD base */
+	ushort	fcc_tbdstat;	/* TxBD status */
+	ushort	fcc_tbdlen;	/* TxBD down counter */
+	uint	fcc_tdptr;	/* TxBD internal data pointer */
+	uint	fcc_rbptr;	/* Rx BD Internal buf pointer */
+	uint	fcc_tbptr;	/* Tx BD Internal buf pointer */
+	uint	fcc_rcrc;	/* Rx temp CRC */
+	uint	fcc_res2;
+	uint	fcc_tcrc;	/* Tx temp CRC */
+} fccp_t;
+
+
+/* Ethernet controller through FCC.
+*/
+typedef struct fcc_enet {
+	fccp_t	fen_genfcc;
+	uint	fen_statbuf;	/* Internal status buffer */
+	uint	fen_camptr;	/* CAM address */
+	uint	fen_cmask;	/* Constant mask for CRC */
+	uint	fen_cpres;	/* Preset CRC */
+	uint	fen_crcec;	/* CRC Error counter */
+	uint	fen_alec;	/* alignment error counter */
+	uint	fen_disfc;	/* discard frame counter */
+	ushort	fen_retlim;	/* Retry limit */
+	ushort	fen_retcnt;	/* Retry counter */
+	ushort	fen_pper;	/* Persistence */
+	ushort	fen_boffcnt;	/* backoff counter */
+	uint	fen_gaddrh;	/* Group address filter, high 32-bits */
+	uint	fen_gaddrl;	/* Group address filter, low 32-bits */
+	ushort	fen_tfcstat;	/* out of sequence TxBD */
+	ushort	fen_tfclen;
+	uint	fen_tfcptr;
+	ushort	fen_mflr;	/* Maximum frame length (1518) */
+	ushort	fen_paddrh;	/* MAC address */
+	ushort	fen_paddrm;
+	ushort	fen_paddrl;
+	ushort	fen_ibdcount;	/* Internal BD counter */
+	ushort	fen_ibdstart;	/* Internal BD start pointer */
+	ushort	fen_ibdend;	/* Internal BD end pointer */
+	ushort	fen_txlen;	/* Internal Tx frame length counter */
+	uint	fen_ibdbase[8]; /* Internal use */
+	uint	fen_iaddrh;	/* Individual address filter */
+	uint	fen_iaddrl;
+	ushort	fen_minflr;	/* Minimum frame length (64) */
+	ushort	fen_taddrh;	/* Filter transfer MAC address */
+	ushort	fen_taddrm;
+	ushort	fen_taddrl;
+	ushort	fen_padptr;	/* Pointer to pad byte buffer */
+	ushort	fen_cftype;	/* control frame type */
+	ushort	fen_cfrange;	/* control frame range */
+	ushort	fen_maxb;	/* maximum BD count */
+	ushort	fen_maxd1;	/* Max DMA1 length (1520) */
+	ushort	fen_maxd2;	/* Max DMA2 length (1520) */
+	ushort	fen_maxd;	/* internal max DMA count */
+	ushort	fen_dmacnt;	/* internal DMA counter */
+	uint	fen_octc;	/* Total octect counter */
+	uint	fen_colc;	/* Total collision counter */
+	uint	fen_broc;	/* Total broadcast packet counter */
+	uint	fen_mulc;	/* Total multicast packet count */
+	uint	fen_uspc;	/* Total packets < 64 bytes */
+	uint	fen_frgc;	/* Total packets < 64 bytes with errors */
+	uint	fen_ospc;	/* Total packets > 1518 */
+	uint	fen_jbrc;	/* Total packets > 1518 with errors */
+	uint	fen_p64c;	/* Total packets == 64 bytes */
+	uint	fen_p65c;	/* Total packets 64 < bytes <= 127 */
+	uint	fen_p128c;	/* Total packets 127 < bytes <= 255 */
+	uint	fen_p256c;	/* Total packets 256 < bytes <= 511 */
+	uint	fen_p512c;	/* Total packets 512 < bytes <= 1023 */
+	uint	fen_p1024c;	/* Total packets 1024 < bytes <= 1518 */
+	uint	fen_cambuf;	/* Internal CAM buffer poiner */
+	ushort	fen_rfthr;	/* Received frames threshold */
+	ushort	fen_rfcnt;	/* Received frames count */
+} fcc_enet_t;
+
+/* FCC Event/Mask register as used by Ethernet.
+*/
+#define FCC_ENET_GRA	((ushort)0x0080)	/* Graceful stop complete */
+#define FCC_ENET_RXC	((ushort)0x0040)	/* Control Frame Received */
+#define FCC_ENET_TXC	((ushort)0x0020)	/* Out of seq. Tx sent */
+#define FCC_ENET_TXE	((ushort)0x0010)	/* Transmit Error */
+#define FCC_ENET_RXF	((ushort)0x0008)	/* Full frame received */
+#define FCC_ENET_BSY	((ushort)0x0004)	/* Busy.  Rx Frame dropped */
+#define FCC_ENET_TXB	((ushort)0x0002)	/* A buffer was transmitted */
+#define FCC_ENET_RXB	((ushort)0x0001)	/* A buffer was received */
+
+/* FCC Mode Register (FPSMR) as used by Ethernet.
+*/
+#define FCC_PSMR_HBC	((uint)0x80000000)	/* Enable heartbeat */
+#define FCC_PSMR_FC	((uint)0x40000000)	/* Force Collision */
+#define FCC_PSMR_SBT	((uint)0x20000000)	/* Stop backoff timer */
+#define FCC_PSMR_LPB	((uint)0x10000000)	/* Local protect. 1 = FDX */
+#define FCC_PSMR_LCW	((uint)0x08000000)	/* Late collision select */
+#define FCC_PSMR_FDE	((uint)0x04000000)	/* Full Duplex Enable */
+#define FCC_PSMR_MON	((uint)0x02000000)	/* RMON Enable */
+#define FCC_PSMR_PRO	((uint)0x00400000)	/* Promiscuous Enable */
+#define FCC_PSMR_FCE	((uint)0x00200000)	/* Flow Control Enable */
+#define FCC_PSMR_RSH	((uint)0x00100000)	/* Receive Short Frames */
+#define FCC_PSMR_CAM	((uint)0x00000400)	/* CAM enable */
+#define FCC_PSMR_BRO	((uint)0x00000200)	/* Broadcast pkt discard */
+#define FCC_PSMR_ENCRC	((uint)0x00000080)	/* Use 32-bit CRC */
+
+/* IIC parameter RAM.
+*/
+typedef struct iic {
+	ushort	iic_rbase;	/* Rx Buffer descriptor base address */
+	ushort	iic_tbase;	/* Tx Buffer descriptor base address */
+	u_char	iic_rfcr;	/* Rx function code */
+	u_char	iic_tfcr;	/* Tx function code */
+	ushort	iic_mrblr;	/* Max receive buffer length */
+	uint	iic_rstate;	/* Internal */
+	uint	iic_rdp;	/* Internal */
+	ushort	iic_rbptr;	/* Internal */
+	ushort	iic_rbc;	/* Internal */
+	uint	iic_rxtmp;	/* Internal */
+	uint	iic_tstate;	/* Internal */
+	uint	iic_tdp;	/* Internal */
+	ushort	iic_tbptr;	/* Internal */
+	ushort	iic_tbc;	/* Internal */
+	uint	iic_txtmp;	/* Internal */
+} iic_t;
+
+/* SPI parameter RAM.
+*/
+typedef struct spi {
+	ushort	spi_rbase;	/* Rx Buffer descriptor base address */
+	ushort	spi_tbase;	/* Tx Buffer descriptor base address */
+	u_char	spi_rfcr;	/* Rx function code */
+	u_char	spi_tfcr;	/* Tx function code */
+	ushort	spi_mrblr;	/* Max receive buffer length */
+	uint	spi_rstate;	/* Internal */
+	uint	spi_rdp;	/* Internal */
+	ushort	spi_rbptr;	/* Internal */
+	ushort	spi_rbc;	/* Internal */
+	uint	spi_rxtmp;	/* Internal */
+	uint	spi_tstate;	/* Internal */
+	uint	spi_tdp;	/* Internal */
+	ushort	spi_tbptr;	/* Internal */
+	ushort	spi_tbc;	/* Internal */
+	uint	spi_txtmp;	/* Internal */
+	uint	spi_res;	/* Tx temp. */
+	uint	spi_res1[4];	/* SDMA temp. */
+} spi_t;
+
+/* SPI Mode register.
+*/
+#define SPMODE_LOOP	((ushort)0x4000)	/* Loopback */
+#define SPMODE_CI	((ushort)0x2000)	/* Clock Invert */
+#define SPMODE_CP	((ushort)0x1000)	/* Clock Phase */
+#define SPMODE_DIV16	((ushort)0x0800)	/* BRG/16 mode */
+#define SPMODE_REV	((ushort)0x0400)	/* Reversed Data */
+#define SPMODE_MSTR	((ushort)0x0200)	/* SPI Master */
+#define SPMODE_EN	((ushort)0x0100)	/* Enable */
+#define SPMODE_LENMSK	((ushort)0x00f0)	/* character length */
+#define SPMODE_PMMSK	((ushort)0x000f)	/* prescale modulus */
+
+#define SPMODE_LEN(x)	((((x)-1)&0xF)<<4)
+#define SPMODE_PM(x)	((x) &0xF)
+
+#define SPI_EB		((u_char)0x10)		/* big endian byte order */
+
+/* IDMA parameter RAM
+*/
+typedef struct idma {
+	ushort ibase;		/* IDMA buffer descriptor table base address */
+	ushort dcm;		/* DMA channel mode */
+	ushort ibdptr;		/* IDMA current buffer descriptor pointer */
+	ushort dpr_buf;		/* IDMA transfer buffer base address */
+	ushort buf_inv;		/* internal buffer inventory */
+	ushort ss_max;		/* steady-state maximum transfer size */
+	ushort dpr_in_ptr;	/* write pointer inside the internal buffer */
+	ushort sts;		/* source transfer size */
+	ushort dpr_out_ptr;	/* read pointer inside the internal buffer */
+	ushort seob;		/* source end of burst */
+	ushort deob;		/* destination end of burst */
+	ushort dts;		/* destination transfer size */
+	ushort ret_add;		/* return address when working in ERM=1 mode */
+	ushort res0;		/* reserved */
+	uint   bd_cnt;		/* internal byte count */
+	uint   s_ptr;		/* source internal data pointer */
+	uint   d_ptr;		/* destination internal data pointer */
+	uint   istate;		/* internal state */
+	u_char res1[20];	/* pad to 64-byte length */
+} idma_t;
+
+/* DMA channel mode bit fields
+*/
+#define IDMA_DCM_FB		((ushort)0x8000) /* fly-by mode */
+#define IDMA_DCM_LP		((ushort)0x4000) /* low priority */
+#define IDMA_DCM_TC2		((ushort)0x0400) /* value driven on TC[2] */
+#define IDMA_DCM_DMA_WRAP_MASK	((ushort)0x01c0) /* mask for DMA wrap */
+#define IDMA_DCM_DMA_WRAP_64	((ushort)0x0000) /* 64-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_128	((ushort)0x0040) /* 128-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_256	((ushort)0x0080) /* 256-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_512	((ushort)0x00c0) /* 512-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_1024	((ushort)0x0100) /* 1024-byte DMA xfer buffer */
+#define IDMA_DCM_DMA_WRAP_2048	((ushort)0x0140) /* 2048-byte DMA xfer buffer */
+#define IDMA_DCM_SINC		((ushort)0x0020) /* source inc addr */
+#define IDMA_DCM_DINC		((ushort)0x0010) /* destination inc addr */
+#define IDMA_DCM_ERM		((ushort)0x0008) /* external request mode */
+#define IDMA_DCM_DT		((ushort)0x0004) /* DONE treatment */
+#define IDMA_DCM_SD_MASK	((ushort)0x0003) /* mask for SD bit field */
+#define IDMA_DCM_SD_MEM2MEM	((ushort)0x0000) /* memory-to-memory xfer */
+#define IDMA_DCM_SD_PER2MEM	((ushort)0x0002) /* peripheral-to-memory xfer */
+#define IDMA_DCM_SD_MEM2PER	((ushort)0x0001) /* memory-to-peripheral xfer */
+
+/* IDMA Buffer Descriptors
+*/
+typedef struct idma_bd {
+	uint flags;
+	uint len;	/* data length */
+	uint src;	/* source data buffer pointer */
+	uint dst;	/* destination data buffer pointer */
+} idma_bd_t;
+
+/* IDMA buffer descriptor flag bit fields
+*/
+#define IDMA_BD_V	((uint)0x80000000)	/* valid */
+#define IDMA_BD_W	((uint)0x20000000)	/* wrap */
+#define IDMA_BD_I	((uint)0x10000000)	/* interrupt */
+#define IDMA_BD_L	((uint)0x08000000)	/* last */
+#define IDMA_BD_CM	((uint)0x02000000)	/* continuous mode */
+#define IDMA_BD_SDN	((uint)0x00400000)	/* source done */
+#define IDMA_BD_DDN	((uint)0x00200000)	/* destination done */
+#define IDMA_BD_DGBL	((uint)0x00100000)	/* destination global */
+#define IDMA_BD_DBO_LE	((uint)0x00040000)	/* little-end dest byte order */
+#define IDMA_BD_DBO_BE	((uint)0x00080000)	/* big-end dest byte order */
+#define IDMA_BD_DDTB	((uint)0x00010000)	/* destination data bus */
+#define IDMA_BD_SGBL	((uint)0x00002000)	/* source global */
+#define IDMA_BD_SBO_LE	((uint)0x00000800)	/* little-end src byte order */
+#define IDMA_BD_SBO_BE	((uint)0x00001000)	/* big-end src byte order */
+#define IDMA_BD_SDTB	((uint)0x00000200)	/* source data bus */
+
+/* per-channel IDMA registers
+*/
+typedef struct im_idma {
+	u_char idsr;			/* IDMAn event status register */
+	u_char res0[3];
+	u_char idmr;			/* IDMAn event mask register */
+	u_char res1[3];
+} im_idma_t;
+
+/* IDMA event register bit fields
+*/
+#define IDMA_EVENT_SC	((unsigned char)0x08)	/* stop completed */
+#define IDMA_EVENT_OB	((unsigned char)0x04)	/* out of buffers */
+#define IDMA_EVENT_EDN	((unsigned char)0x02)	/* external DONE asserted */
+#define IDMA_EVENT_BC	((unsigned char)0x01)	/* buffer descriptor complete */
+
+/* RISC Controller Configuration Register (RCCR) bit fields
+*/
+#define RCCR_TIME	((uint)0x80000000) /* timer enable */
+#define RCCR_TIMEP_MASK	((uint)0x3f000000) /* mask for timer period bit field */
+#define RCCR_DR0M	((uint)0x00800000) /* IDMA0 request mode */
+#define RCCR_DR1M	((uint)0x00400000) /* IDMA1 request mode */
+#define RCCR_DR2M	((uint)0x00000080) /* IDMA2 request mode */
+#define RCCR_DR3M	((uint)0x00000040) /* IDMA3 request mode */
+#define RCCR_DR0QP_MASK	((uint)0x00300000) /* mask for IDMA0 req priority */
+#define RCCR_DR0QP_HIGH ((uint)0x00000000) /* IDMA0 has high req priority */
+#define RCCR_DR0QP_MED	((uint)0x00100000) /* IDMA0 has medium req priority */
+#define RCCR_DR0QP_LOW	((uint)0x00200000) /* IDMA0 has low req priority */
+#define RCCR_DR1QP_MASK	((uint)0x00030000) /* mask for IDMA1 req priority */
+#define RCCR_DR1QP_HIGH ((uint)0x00000000) /* IDMA1 has high req priority */
+#define RCCR_DR1QP_MED	((uint)0x00010000) /* IDMA1 has medium req priority */
+#define RCCR_DR1QP_LOW	((uint)0x00020000) /* IDMA1 has low req priority */
+#define RCCR_DR2QP_MASK	((uint)0x00000030) /* mask for IDMA2 req priority */
+#define RCCR_DR2QP_HIGH ((uint)0x00000000) /* IDMA2 has high req priority */
+#define RCCR_DR2QP_MED	((uint)0x00000010) /* IDMA2 has medium req priority */
+#define RCCR_DR2QP_LOW	((uint)0x00000020) /* IDMA2 has low req priority */
+#define RCCR_DR3QP_MASK	((uint)0x00000003) /* mask for IDMA3 req priority */
+#define RCCR_DR3QP_HIGH ((uint)0x00000000) /* IDMA3 has high req priority */
+#define RCCR_DR3QP_MED	((uint)0x00000001) /* IDMA3 has medium req priority */
+#define RCCR_DR3QP_LOW	((uint)0x00000002) /* IDMA3 has low req priority */
+#define RCCR_EIE	((uint)0x00080000) /* external interrupt enable */
+#define RCCR_SCD	((uint)0x00040000) /* scheduler configuration */
+#define RCCR_ERAM_MASK	((uint)0x0000e000) /* mask for enable RAM microcode */
+#define RCCR_ERAM_0KB	((uint)0x00000000) /* use 0KB of dpram for microcode */
+#define RCCR_ERAM_2KB	((uint)0x00002000) /* use 2KB of dpram for microcode */
+#define RCCR_ERAM_4KB	((uint)0x00004000) /* use 4KB of dpram for microcode */
+#define RCCR_ERAM_6KB	((uint)0x00006000) /* use 6KB of dpram for microcode */
+#define RCCR_ERAM_8KB	((uint)0x00008000) /* use 8KB of dpram for microcode */
+#define RCCR_ERAM_10KB	((uint)0x0000a000) /* use 10KB of dpram for microcode */
+#define RCCR_ERAM_12KB	((uint)0x0000c000) /* use 12KB of dpram for microcode */
+#define RCCR_EDM0	((uint)0x00000800) /* DREQ0 edge detect mode */
+#define RCCR_EDM1	((uint)0x00000400) /* DREQ1 edge detect mode */
+#define RCCR_EDM2	((uint)0x00000200) /* DREQ2 edge detect mode */
+#define RCCR_EDM3	((uint)0x00000100) /* DREQ3 edge detect mode */
+#define RCCR_DEM01	((uint)0x00000008) /* DONE0/DONE1 edge detect mode */
+#define RCCR_DEM23	((uint)0x00000004) /* DONE2/DONE3 edge detect mode */
+
+/*-----------------------------------------------------------------------
+ * CMXFCR - CMX FCC Clock Route Register
+ */
+#define CMXFCR_FC1         0x40000000   /* FCC1 connection              */
+#define CMXFCR_RF1CS_MSK   0x38000000   /* Receive FCC1 Clock Source Mask */
+#define CMXFCR_TF1CS_MSK   0x07000000   /* Transmit FCC1 Clock Source Mask */
+#define CMXFCR_FC2         0x00400000   /* FCC2 connection              */
+#define CMXFCR_RF2CS_MSK   0x00380000   /* Receive FCC2 Clock Source Mask */
+#define CMXFCR_TF2CS_MSK   0x00070000   /* Transmit FCC2 Clock Source Mask */
+#define CMXFCR_FC3         0x00004000   /* FCC3 connection              */
+#define CMXFCR_RF3CS_MSK   0x00003800   /* Receive FCC3 Clock Source Mask */
+#define CMXFCR_TF3CS_MSK   0x00000700   /* Transmit FCC3 Clock Source Mask */
+
+#define CMXFCR_RF1CS_BRG5  0x00000000   /* Receive FCC1 Clock Source is BRG5 */
+#define CMXFCR_RF1CS_BRG6  0x08000000   /* Receive FCC1 Clock Source is BRG6 */
+#define CMXFCR_RF1CS_BRG7  0x10000000   /* Receive FCC1 Clock Source is BRG7 */
+#define CMXFCR_RF1CS_BRG8  0x18000000   /* Receive FCC1 Clock Source is BRG8 */
+#define CMXFCR_RF1CS_CLK9  0x20000000   /* Receive FCC1 Clock Source is CLK9 */
+#define CMXFCR_RF1CS_CLK10 0x28000000   /* Receive FCC1 Clock Source is CLK10 */
+#define CMXFCR_RF1CS_CLK11 0x30000000   /* Receive FCC1 Clock Source is CLK11 */
+#define CMXFCR_RF1CS_CLK12 0x38000000   /* Receive FCC1 Clock Source is CLK12 */
+
+#define CMXFCR_TF1CS_BRG5  0x00000000   /* Transmit FCC1 Clock Source is BRG5 */
+#define CMXFCR_TF1CS_BRG6  0x01000000   /* Transmit FCC1 Clock Source is BRG6 */
+#define CMXFCR_TF1CS_BRG7  0x02000000   /* Transmit FCC1 Clock Source is BRG7 */
+#define CMXFCR_TF1CS_BRG8  0x03000000   /* Transmit FCC1 Clock Source is BRG8 */
+#define CMXFCR_TF1CS_CLK9  0x04000000   /* Transmit FCC1 Clock Source is CLK9 */
+#define CMXFCR_TF1CS_CLK10 0x05000000   /* Transmit FCC1 Clock Source is CLK10 */
+#define CMXFCR_TF1CS_CLK11 0x06000000   /* Transmit FCC1 Clock Source is CLK11 */
+#define CMXFCR_TF1CS_CLK12 0x07000000   /* Transmit FCC1 Clock Source is CLK12 */
+
+#define CMXFCR_RF2CS_BRG5  0x00000000   /* Receive FCC2 Clock Source is BRG5 */
+#define CMXFCR_RF2CS_BRG6  0x00080000   /* Receive FCC2 Clock Source is BRG6 */
+#define CMXFCR_RF2CS_BRG7  0x00100000   /* Receive FCC2 Clock Source is BRG7 */
+#define CMXFCR_RF2CS_BRG8  0x00180000   /* Receive FCC2 Clock Source is BRG8 */
+#define CMXFCR_RF2CS_CLK13 0x00200000   /* Receive FCC2 Clock Source is CLK13 */
+#define CMXFCR_RF2CS_CLK14 0x00280000   /* Receive FCC2 Clock Source is CLK14 */
+#define CMXFCR_RF2CS_CLK15 0x00300000   /* Receive FCC2 Clock Source is CLK15 */
+#define CMXFCR_RF2CS_CLK16 0x00380000   /* Receive FCC2 Clock Source is CLK16 */
+
+#define CMXFCR_TF2CS_BRG5  0x00000000   /* Transmit FCC2 Clock Source is BRG5 */
+#define CMXFCR_TF2CS_BRG6  0x00010000   /* Transmit FCC2 Clock Source is BRG6 */
+#define CMXFCR_TF2CS_BRG7  0x00020000   /* Transmit FCC2 Clock Source is BRG7 */
+#define CMXFCR_TF2CS_BRG8  0x00030000   /* Transmit FCC2 Clock Source is BRG8 */
+#define CMXFCR_TF2CS_CLK13 0x00040000   /* Transmit FCC2 Clock Source is CLK13 */
+#define CMXFCR_TF2CS_CLK14 0x00050000   /* Transmit FCC2 Clock Source is CLK14 */
+#define CMXFCR_TF2CS_CLK15 0x00060000   /* Transmit FCC2 Clock Source is CLK15 */
+#define CMXFCR_TF2CS_CLK16 0x00070000   /* Transmit FCC2 Clock Source is CLK16 */
+
+#define CMXFCR_RF3CS_BRG5  0x00000000   /* Receive FCC3 Clock Source is BRG5 */
+#define CMXFCR_RF3CS_BRG6  0x00000800   /* Receive FCC3 Clock Source is BRG6 */
+#define CMXFCR_RF3CS_BRG7  0x00001000   /* Receive FCC3 Clock Source is BRG7 */
+#define CMXFCR_RF3CS_BRG8  0x00001800   /* Receive FCC3 Clock Source is BRG8 */
+#define CMXFCR_RF3CS_CLK13 0x00002000   /* Receive FCC3 Clock Source is CLK13 */
+#define CMXFCR_RF3CS_CLK14 0x00002800   /* Receive FCC3 Clock Source is CLK14 */
+#define CMXFCR_RF3CS_CLK15 0x00003000   /* Receive FCC3 Clock Source is CLK15 */
+#define CMXFCR_RF3CS_CLK16 0x00003800   /* Receive FCC3 Clock Source is CLK16 */
+
+#define CMXFCR_TF3CS_BRG5  0x00000000   /* Transmit FCC3 Clock Source is BRG5 */
+#define CMXFCR_TF3CS_BRG6  0x00000100   /* Transmit FCC3 Clock Source is BRG6 */
+#define CMXFCR_TF3CS_BRG7  0x00000200   /* Transmit FCC3 Clock Source is BRG7 */
+#define CMXFCR_TF3CS_BRG8  0x00000300   /* Transmit FCC3 Clock Source is BRG8 */
+#define CMXFCR_TF3CS_CLK13 0x00000400   /* Transmit FCC3 Clock Source is CLK13 */
+#define CMXFCR_TF3CS_CLK14 0x00000500   /* Transmit FCC3 Clock Source is CLK14 */
+#define CMXFCR_TF3CS_CLK15 0x00000600   /* Transmit FCC3 Clock Source is CLK15 */
+#define CMXFCR_TF3CS_CLK16 0x00000700   /* Transmit FCC3 Clock Source is CLK16 */
+
+/*-----------------------------------------------------------------------
+ * CMXSCR - CMX SCC Clock Route Register
+ */
+#define CMXSCR_GR1         0x80000000   /* Grant Support of SCC1        */
+#define CMXSCR_SC1         0x40000000   /* SCC1 connection              */
+#define CMXSCR_RS1CS_MSK   0x38000000   /* Receive SCC1 Clock Source Mask */
+#define CMXSCR_TS1CS_MSK   0x07000000   /* Transmit SCC1 Clock Source Mask */
+#define CMXSCR_GR2         0x00800000   /* Grant Support of SCC2        */
+#define CMXSCR_SC2         0x00400000   /* SCC2 connection              */
+#define CMXSCR_RS2CS_MSK   0x00380000   /* Receive SCC2 Clock Source Mask */
+#define CMXSCR_TS2CS_MSK   0x00070000   /* Transmit SCC2 Clock Source Mask */
+#define CMXSCR_GR3         0x00008000   /* Grant Support of SCC3        */
+#define CMXSCR_SC3         0x00004000   /* SCC3 connection              */
+#define CMXSCR_RS3CS_MSK   0x00003800   /* Receive SCC3 Clock Source Mask */
+#define CMXSCR_TS3CS_MSK   0x00000700   /* Transmit SCC3 Clock Source Mask */
+#define CMXSCR_GR4         0x00000080   /* Grant Support of SCC4        */
+#define CMXSCR_SC4         0x00000040   /* SCC4 connection              */
+#define CMXSCR_RS4CS_MSK   0x00000038   /* Receive SCC4 Clock Source Mask */
+#define CMXSCR_TS4CS_MSK   0x00000007   /* Transmit SCC4 Clock Source Mask */
+
+#define CMXSCR_RS1CS_BRG1  0x00000000   /* SCC1 Rx Clock Source is BRG1 */
+#define CMXSCR_RS1CS_BRG2  0x08000000   /* SCC1 Rx Clock Source is BRG2 */
+#define CMXSCR_RS1CS_BRG3  0x10000000   /* SCC1 Rx Clock Source is BRG3 */
+#define CMXSCR_RS1CS_BRG4  0x18000000   /* SCC1 Rx Clock Source is BRG4 */
+#define CMXSCR_RS1CS_CLK11 0x20000000   /* SCC1 Rx Clock Source is CLK11 */
+#define CMXSCR_RS1CS_CLK12 0x28000000   /* SCC1 Rx Clock Source is CLK12 */
+#define CMXSCR_RS1CS_CLK3  0x30000000   /* SCC1 Rx Clock Source is CLK3 */
+#define CMXSCR_RS1CS_CLK4  0x38000000   /* SCC1 Rx Clock Source is CLK4 */
+
+#define CMXSCR_TS1CS_BRG1  0x00000000   /* SCC1 Tx Clock Source is BRG1 */
+#define CMXSCR_TS1CS_BRG2  0x01000000   /* SCC1 Tx Clock Source is BRG2 */
+#define CMXSCR_TS1CS_BRG3  0x02000000   /* SCC1 Tx Clock Source is BRG3 */
+#define CMXSCR_TS1CS_BRG4  0x03000000   /* SCC1 Tx Clock Source is BRG4 */
+#define CMXSCR_TS1CS_CLK11 0x04000000   /* SCC1 Tx Clock Source is CLK11 */
+#define CMXSCR_TS1CS_CLK12 0x05000000   /* SCC1 Tx Clock Source is CLK12 */
+#define CMXSCR_TS1CS_CLK3  0x06000000   /* SCC1 Tx Clock Source is CLK3 */
+#define CMXSCR_TS1CS_CLK4  0x07000000   /* SCC1 Tx Clock Source is CLK4 */
+
+#define CMXSCR_RS2CS_BRG1  0x00000000   /* SCC2 Rx Clock Source is BRG1 */
+#define CMXSCR_RS2CS_BRG2  0x00080000   /* SCC2 Rx Clock Source is BRG2 */
+#define CMXSCR_RS2CS_BRG3  0x00100000   /* SCC2 Rx Clock Source is BRG3 */
+#define CMXSCR_RS2CS_BRG4  0x00180000   /* SCC2 Rx Clock Source is BRG4 */
+#define CMXSCR_RS2CS_CLK11 0x00200000   /* SCC2 Rx Clock Source is CLK11 */
+#define CMXSCR_RS2CS_CLK12 0x00280000   /* SCC2 Rx Clock Source is CLK12 */
+#define CMXSCR_RS2CS_CLK3  0x00300000   /* SCC2 Rx Clock Source is CLK3 */
+#define CMXSCR_RS2CS_CLK4  0x00380000   /* SCC2 Rx Clock Source is CLK4 */
+
+#define CMXSCR_TS2CS_BRG1  0x00000000   /* SCC2 Tx Clock Source is BRG1 */
+#define CMXSCR_TS2CS_BRG2  0x00010000   /* SCC2 Tx Clock Source is BRG2 */
+#define CMXSCR_TS2CS_BRG3  0x00020000   /* SCC2 Tx Clock Source is BRG3 */
+#define CMXSCR_TS2CS_BRG4  0x00030000   /* SCC2 Tx Clock Source is BRG4 */
+#define CMXSCR_TS2CS_CLK11 0x00040000   /* SCC2 Tx Clock Source is CLK11 */
+#define CMXSCR_TS2CS_CLK12 0x00050000   /* SCC2 Tx Clock Source is CLK12 */
+#define CMXSCR_TS2CS_CLK3  0x00060000   /* SCC2 Tx Clock Source is CLK3 */
+#define CMXSCR_TS2CS_CLK4  0x00070000   /* SCC2 Tx Clock Source is CLK4 */
+
+#define CMXSCR_RS3CS_BRG1  0x00000000   /* SCC3 Rx Clock Source is BRG1 */
+#define CMXSCR_RS3CS_BRG2  0x00000800   /* SCC3 Rx Clock Source is BRG2 */
+#define CMXSCR_RS3CS_BRG3  0x00001000   /* SCC3 Rx Clock Source is BRG3 */
+#define CMXSCR_RS3CS_BRG4  0x00001800   /* SCC3 Rx Clock Source is BRG4 */
+#define CMXSCR_RS3CS_CLK5  0x00002000   /* SCC3 Rx Clock Source is CLK5 */
+#define CMXSCR_RS3CS_CLK6  0x00002800   /* SCC3 Rx Clock Source is CLK6 */
+#define CMXSCR_RS3CS_CLK7  0x00003000   /* SCC3 Rx Clock Source is CLK7 */
+#define CMXSCR_RS3CS_CLK8  0x00003800   /* SCC3 Rx Clock Source is CLK8 */
+
+#define CMXSCR_TS3CS_BRG1  0x00000000   /* SCC3 Tx Clock Source is BRG1 */
+#define CMXSCR_TS3CS_BRG2  0x00000100   /* SCC3 Tx Clock Source is BRG2 */
+#define CMXSCR_TS3CS_BRG3  0x00000200   /* SCC3 Tx Clock Source is BRG3 */
+#define CMXSCR_TS3CS_BRG4  0x00000300   /* SCC3 Tx Clock Source is BRG4 */
+#define CMXSCR_TS3CS_CLK5  0x00000400   /* SCC3 Tx Clock Source is CLK5 */
+#define CMXSCR_TS3CS_CLK6  0x00000500   /* SCC3 Tx Clock Source is CLK6 */
+#define CMXSCR_TS3CS_CLK7  0x00000600   /* SCC3 Tx Clock Source is CLK7 */
+#define CMXSCR_TS3CS_CLK8  0x00000700   /* SCC3 Tx Clock Source is CLK8 */
+
+#define CMXSCR_RS4CS_BRG1  0x00000000   /* SCC4 Rx Clock Source is BRG1 */
+#define CMXSCR_RS4CS_BRG2  0x00000008   /* SCC4 Rx Clock Source is BRG2 */
+#define CMXSCR_RS4CS_BRG3  0x00000010   /* SCC4 Rx Clock Source is BRG3 */
+#define CMXSCR_RS4CS_BRG4  0x00000018   /* SCC4 Rx Clock Source is BRG4 */
+#define CMXSCR_RS4CS_CLK5  0x00000020   /* SCC4 Rx Clock Source is CLK5 */
+#define CMXSCR_RS4CS_CLK6  0x00000028   /* SCC4 Rx Clock Source is CLK6 */
+#define CMXSCR_RS4CS_CLK7  0x00000030   /* SCC4 Rx Clock Source is CLK7 */
+#define CMXSCR_RS4CS_CLK8  0x00000038   /* SCC4 Rx Clock Source is CLK8 */
+
+#define CMXSCR_TS4CS_BRG1  0x00000000   /* SCC4 Tx Clock Source is BRG1 */
+#define CMXSCR_TS4CS_BRG2  0x00000001   /* SCC4 Tx Clock Source is BRG2 */
+#define CMXSCR_TS4CS_BRG3  0x00000002   /* SCC4 Tx Clock Source is BRG3 */
+#define CMXSCR_TS4CS_BRG4  0x00000003   /* SCC4 Tx Clock Source is BRG4 */
+#define CMXSCR_TS4CS_CLK5  0x00000004   /* SCC4 Tx Clock Source is CLK5 */
+#define CMXSCR_TS4CS_CLK6  0x00000005   /* SCC4 Tx Clock Source is CLK6 */
+#define CMXSCR_TS4CS_CLK7  0x00000006   /* SCC4 Tx Clock Source is CLK7 */
+#define CMXSCR_TS4CS_CLK8  0x00000007   /* SCC4 Tx Clock Source is CLK8 */
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration Register				 4-31
+ */
+#define SIUMCR_BBD	0x80000000	/* Bus Busy Disable		*/
+#define SIUMCR_ESE	0x40000000	/* External Snoop Enable	*/
+#define SIUMCR_PBSE	0x20000000	/* Parity Byte Select Enable	*/
+#define SIUMCR_CDIS	0x10000000	/* Core Disable			*/
+#define SIUMCR_DPPC00	0x00000000	/* Data Parity Pins Configuration*/
+#define SIUMCR_DPPC01	0x04000000	/* - " -			*/
+#define SIUMCR_DPPC10	0x08000000	/* - " -			*/
+#define SIUMCR_DPPC11	0x0c000000	/* - " -			*/
+#define SIUMCR_L2CPC00	0x00000000	/* L2 Cache Pins Configuration	*/
+#define SIUMCR_L2CPC01	0x01000000	/* - " -			*/
+#define SIUMCR_L2CPC10	0x02000000	/* - " -			*/
+#define SIUMCR_L2CPC11	0x03000000	/* - " -			*/
+#define SIUMCR_LBPC00	0x00000000	/* Local Bus Pins Configuration	*/
+#define SIUMCR_LBPC01	0x00400000	/* - " -			*/
+#define SIUMCR_LBPC10	0x00800000	/* - " -			*/
+#define SIUMCR_LBPC11	0x00c00000	/* - " -			*/
+#define SIUMCR_APPC00	0x00000000	/* Address Parity Pins Configuration*/
+#define SIUMCR_APPC01	0x00100000	/* - " -			*/
+#define SIUMCR_APPC10	0x00200000	/* - " -			*/
+#define SIUMCR_APPC11	0x00300000	/* - " -			*/
+#define SIUMCR_CS10PC00	0x00000000	/* CS10 Pin Configuration	*/
+#define SIUMCR_CS10PC01	0x00040000	/* - " -			*/
+#define SIUMCR_CS10PC10	0x00080000	/* - " -			*/
+#define SIUMCR_CS10PC11	0x000c0000	/* - " -			*/
+#define SIUMCR_BCTLC00	0x00000000	/* Buffer Control Configuration	*/
+#define SIUMCR_BCTLC01	0x00010000	/* - " -			*/
+#define SIUMCR_BCTLC10	0x00020000	/* - " -			*/
+#define SIUMCR_BCTLC11	0x00030000	/* - " -			*/
+#define SIUMCR_MMR00	0x00000000	/* Mask Masters Requests	*/
+#define SIUMCR_MMR01	0x00004000	/* - " -			*/
+#define SIUMCR_MMR10	0x00008000	/* - " -			*/
+#define SIUMCR_MMR11	0x0000c000	/* - " -			*/
+#define SIUMCR_LPBSE	0x00002000	/* LocalBus Parity Byte Select Enable*/
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock Control Register					 9-8
+*/
+#define SCCR_PCI_MODE	0x00000100	/* PCI Mode	*/
+#define SCCR_PCI_MODCK	0x00000080	/* Value of PCI_MODCK pin	*/
+#define SCCR_PCIDF_MSK	0x00000078	/* PCI division factor	*/
+#define SCCR_PCIDF_SHIFT 3
+
+#ifndef CPM_IMMR_OFFSET
+#define CPM_IMMR_OFFSET	0x101a8
+#endif
+
+#define FCC_PSMR_RMII	((uint)0x00020000)	/* Use RMII interface */
+
+/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK
+ * in order to use clock-computing stuff below for the FCC x
+ */
+
+/* Automatically generates register configurations */
+#define PC_CLK(x)	((uint)(1<<(x-1)))	/* FCC CLK I/O ports */
+
+#define CMXFCR_RF1CS(x)	((uint)((x-5)<<27))	/* FCC1 Receive Clock Source */
+#define CMXFCR_TF1CS(x)	((uint)((x-5)<<24))	/* FCC1 Transmit Clock Source */
+#define CMXFCR_RF2CS(x)	((uint)((x-9)<<19))	/* FCC2 Receive Clock Source */
+#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16))	/* FCC2 Transmit Clock Source */
+#define CMXFCR_RF3CS(x)	((uint)((x-9)<<11))	/* FCC3 Receive Clock Source */
+#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8))	/* FCC3 Transmit Clock Source */
+
+#define PC_F1RXCLK	PC_CLK(F1_RXCLK)
+#define PC_F1TXCLK	PC_CLK(F1_TXCLK)
+#define CMX1_CLK_ROUTE	(CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
+#define CMX1_CLK_MASK	((uint)0xff000000)
+
+#define PC_F2RXCLK	PC_CLK(F2_RXCLK)
+#define PC_F2TXCLK	PC_CLK(F2_TXCLK)
+#define CMX2_CLK_ROUTE	(CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
+#define CMX2_CLK_MASK	((uint)0x00ff0000)
+
+#define PC_F3RXCLK	PC_CLK(F3_RXCLK)
+#define PC_F3TXCLK	PC_CLK(F3_TXCLK)
+#define CMX3_CLK_ROUTE	(CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
+#define CMX3_CLK_MASK	((uint)0x0000ff00)
+
+#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK)
+#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE)
+
+#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK)
+
+/* I/O Pin assignment for FCC1.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PA1_COL		0x00000001U
+#define PA1_CRS		0x00000002U
+#define PA1_TXER	0x00000004U
+#define PA1_TXEN	0x00000008U
+#define PA1_RXDV	0x00000010U
+#define PA1_RXER	0x00000020U
+#define PA1_TXDAT	0x00003c00U
+#define PA1_RXDAT	0x0003c000U
+#define PA1_PSORA0	(PA1_RXDAT | PA1_TXDAT)
+#define PA1_PSORA1	(PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
+		PA1_RXDV | PA1_RXER)
+#define PA1_DIRA0	(PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
+#define PA1_DIRA1	(PA1_TXDAT | PA1_TXEN | PA1_TXER)
+
+
+/* I/O Pin assignment for FCC2.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PB2_TXER	0x00000001U
+#define PB2_RXDV	0x00000002U
+#define PB2_TXEN	0x00000004U
+#define PB2_RXER	0x00000008U
+#define PB2_COL		0x00000010U
+#define PB2_CRS		0x00000020U
+#define PB2_TXDAT	0x000003c0U
+#define PB2_RXDAT	0x00003c00U
+#define PB2_PSORB0	(PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
+		PB2_RXER | PB2_RXDV | PB2_TXER)
+#define PB2_PSORB1	(PB2_TXEN)
+#define PB2_DIRB0	(PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
+#define PB2_DIRB1	(PB2_TXDAT | PB2_TXEN | PB2_TXER)
+
+
+/* I/O Pin assignment for FCC3.  I don't yet know the best way to do this,
+ * but there is little variation among the choices.
+ */
+#define PB3_RXDV	0x00004000U
+#define PB3_RXER	0x00008000U
+#define PB3_TXER	0x00010000U
+#define PB3_TXEN	0x00020000U
+#define PB3_COL		0x00040000U
+#define PB3_CRS		0x00080000U
+#define PB3_TXDAT	0x0f000000U
+#define PC3_TXDAT	0x00000010U
+#define PB3_RXDAT	0x00f00000U
+#define PB3_PSORB0	(PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
+		PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
+#define PB3_PSORB1	0
+#define PB3_DIRB0	(PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
+#define PB3_DIRB1	(PB3_TXDAT | PB3_TXEN | PB3_TXER)
+#define PC3_DIRC1	(PC3_TXDAT)
+
+/* Handy macro to specify mem for FCCs*/
+#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
+#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
+#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
+#define FCC3_MEM_OFFSET FCC_MEM_OFFSET(2)
+
+/* Clocks and GRG's */
+
+enum cpm_clk_dir {
+	CPM_CLK_RX,
+	CPM_CLK_TX,
+	CPM_CLK_RTX
+};
+
+enum cpm_clk_target {
+	CPM_CLK_SCC1,
+	CPM_CLK_SCC2,
+	CPM_CLK_SCC3,
+	CPM_CLK_SCC4,
+	CPM_CLK_FCC1,
+	CPM_CLK_FCC2,
+	CPM_CLK_FCC3,
+	CPM_CLK_SMC1,
+	CPM_CLK_SMC2,
+};
+
+enum cpm_clk {
+	CPM_CLK_NONE = 0,
+	CPM_BRG1,	/* Baud Rate Generator  1 */
+	CPM_BRG2,	/* Baud Rate Generator  2 */
+	CPM_BRG3,	/* Baud Rate Generator  3 */
+	CPM_BRG4,	/* Baud Rate Generator  4 */
+	CPM_BRG5,	/* Baud Rate Generator  5 */
+	CPM_BRG6,	/* Baud Rate Generator  6 */
+	CPM_BRG7,	/* Baud Rate Generator  7 */
+	CPM_BRG8,	/* Baud Rate Generator  8 */
+	CPM_CLK1,	/* Clock  1 */
+	CPM_CLK2,	/* Clock  2 */
+	CPM_CLK3,	/* Clock  3 */
+	CPM_CLK4,	/* Clock  4 */
+	CPM_CLK5,	/* Clock  5 */
+	CPM_CLK6,	/* Clock  6 */
+	CPM_CLK7,	/* Clock  7 */
+	CPM_CLK8,	/* Clock  8 */
+	CPM_CLK9,	/* Clock  9 */
+	CPM_CLK10,	/* Clock 10 */
+	CPM_CLK11,	/* Clock 11 */
+	CPM_CLK12,	/* Clock 12 */
+	CPM_CLK13,	/* Clock 13 */
+	CPM_CLK14,	/* Clock 14 */
+	CPM_CLK15,	/* Clock 15 */
+	CPM_CLK16,	/* Clock 16 */
+	CPM_CLK17,	/* Clock 17 */
+	CPM_CLK18,	/* Clock 18 */
+	CPM_CLK19,	/* Clock 19 */
+	CPM_CLK20,	/* Clock 20 */
+	CPM_CLK_DUMMY
+};
+
+extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode);
+extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock);
+
+#define CPM_PIN_INPUT     0
+#define CPM_PIN_OUTPUT    1
+#define CPM_PIN_PRIMARY   0
+#define CPM_PIN_SECONDARY 2
+#define CPM_PIN_GPIO      4
+#define CPM_PIN_OPENDRAIN 8
+
+void cpm2_set_pin(int port, int pin, int flags);
+
+#endif /* __CPM2__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
new file mode 100644
index 000000000000..ef8a248dfd55
--- /dev/null
+++ b/arch/powerpc/include/asm/cputable.h
@@ -0,0 +1,514 @@
+#ifndef __ASM_POWERPC_CPUTABLE_H
+#define __ASM_POWERPC_CPUTABLE_H
+
+#define PPC_FEATURE_32			0x80000000
+#define PPC_FEATURE_64			0x40000000
+#define PPC_FEATURE_601_INSTR		0x20000000
+#define PPC_FEATURE_HAS_ALTIVEC		0x10000000
+#define PPC_FEATURE_HAS_FPU		0x08000000
+#define PPC_FEATURE_HAS_MMU		0x04000000
+#define PPC_FEATURE_HAS_4xxMAC		0x02000000
+#define PPC_FEATURE_UNIFIED_CACHE	0x01000000
+#define PPC_FEATURE_HAS_SPE		0x00800000
+#define PPC_FEATURE_HAS_EFP_SINGLE	0x00400000
+#define PPC_FEATURE_HAS_EFP_DOUBLE	0x00200000
+#define PPC_FEATURE_NO_TB		0x00100000
+#define PPC_FEATURE_POWER4		0x00080000
+#define PPC_FEATURE_POWER5		0x00040000
+#define PPC_FEATURE_POWER5_PLUS		0x00020000
+#define PPC_FEATURE_CELL		0x00010000
+#define PPC_FEATURE_BOOKE		0x00008000
+#define PPC_FEATURE_SMT			0x00004000
+#define PPC_FEATURE_ICACHE_SNOOP	0x00002000
+#define PPC_FEATURE_ARCH_2_05		0x00001000
+#define PPC_FEATURE_PA6T		0x00000800
+#define PPC_FEATURE_HAS_DFP		0x00000400
+#define PPC_FEATURE_POWER6_EXT		0x00000200
+#define PPC_FEATURE_ARCH_2_06		0x00000100
+#define PPC_FEATURE_HAS_VSX		0x00000080
+
+#define PPC_FEATURE_PSERIES_PERFMON_COMPAT \
+					0x00000040
+
+#define PPC_FEATURE_TRUE_LE		0x00000002
+#define PPC_FEATURE_PPC_LE		0x00000001
+
+#ifdef __KERNEL__
+
+#include <asm/asm-compat.h>
+#include <asm/feature-fixups.h>
+
+#ifndef __ASSEMBLY__
+
+/* This structure can grow, it's real size is used by head.S code
+ * via the mkdefs mechanism.
+ */
+struct cpu_spec;
+
+typedef	void (*cpu_setup_t)(unsigned long offset, struct cpu_spec* spec);
+typedef	void (*cpu_restore_t)(void);
+
+enum powerpc_oprofile_type {
+	PPC_OPROFILE_INVALID = 0,
+	PPC_OPROFILE_RS64 = 1,
+	PPC_OPROFILE_POWER4 = 2,
+	PPC_OPROFILE_G4 = 3,
+	PPC_OPROFILE_FSL_EMB = 4,
+	PPC_OPROFILE_CELL = 5,
+	PPC_OPROFILE_PA6T = 6,
+};
+
+enum powerpc_pmc_type {
+	PPC_PMC_DEFAULT = 0,
+	PPC_PMC_IBM = 1,
+	PPC_PMC_PA6T = 2,
+};
+
+struct pt_regs;
+
+extern int machine_check_generic(struct pt_regs *regs);
+extern int machine_check_4xx(struct pt_regs *regs);
+extern int machine_check_440A(struct pt_regs *regs);
+extern int machine_check_e500(struct pt_regs *regs);
+extern int machine_check_e200(struct pt_regs *regs);
+
+/* NOTE WELL: Update identify_cpu() if fields are added or removed! */
+struct cpu_spec {
+	/* CPU is matched via (PVR & pvr_mask) == pvr_value */
+	unsigned int	pvr_mask;
+	unsigned int	pvr_value;
+
+	char		*cpu_name;
+	unsigned long	cpu_features;		/* Kernel features */
+	unsigned int	cpu_user_features;	/* Userland features */
+
+	/* cache line sizes */
+	unsigned int	icache_bsize;
+	unsigned int	dcache_bsize;
+
+	/* number of performance monitor counters */
+	unsigned int	num_pmcs;
+	enum powerpc_pmc_type pmc_type;
+
+	/* this is called to initialize various CPU bits like L1 cache,
+	 * BHT, SPD, etc... from head.S before branching to identify_machine
+	 */
+	cpu_setup_t	cpu_setup;
+	/* Used to restore cpu setup on secondary processors and at resume */
+	cpu_restore_t	cpu_restore;
+
+	/* Used by oprofile userspace to select the right counters */
+	char		*oprofile_cpu_type;
+
+	/* Processor specific oprofile operations */
+	enum powerpc_oprofile_type oprofile_type;
+
+	/* Bit locations inside the mmcra change */
+	unsigned long	oprofile_mmcra_sihv;
+	unsigned long	oprofile_mmcra_sipr;
+
+	/* Bits to clear during an oprofile exception */
+	unsigned long	oprofile_mmcra_clear;
+
+	/* Name of processor class, for the ELF AT_PLATFORM entry */
+	char		*platform;
+
+	/* Processor specific machine check handling. Return negative
+	 * if the error is fatal, 1 if it was fully recovered and 0 to
+	 * pass up (not CPU originated) */
+	int		(*machine_check)(struct pt_regs *regs);
+};
+
+extern struct cpu_spec		*cur_cpu_spec;
+
+extern unsigned int __start___ftr_fixup, __stop___ftr_fixup;
+
+extern struct cpu_spec *identify_cpu(unsigned long offset, unsigned int pvr);
+extern void do_feature_fixups(unsigned long value, void *fixup_start,
+			      void *fixup_end);
+
+extern const char *powerpc_base_platform;
+
+#endif /* __ASSEMBLY__ */
+
+/* CPU kernel features */
+
+/* Retain the 32b definitions all use bottom half of word */
+#define CPU_FTR_COHERENT_ICACHE		ASM_CONST(0x0000000000000001)
+#define CPU_FTR_L2CR			ASM_CONST(0x0000000000000002)
+#define CPU_FTR_SPEC7450		ASM_CONST(0x0000000000000004)
+#define CPU_FTR_ALTIVEC			ASM_CONST(0x0000000000000008)
+#define CPU_FTR_TAU			ASM_CONST(0x0000000000000010)
+#define CPU_FTR_CAN_DOZE		ASM_CONST(0x0000000000000020)
+#define CPU_FTR_USE_TB			ASM_CONST(0x0000000000000040)
+#define CPU_FTR_L2CSR			ASM_CONST(0x0000000000000080)
+#define CPU_FTR_601			ASM_CONST(0x0000000000000100)
+#define CPU_FTR_HPTE_TABLE		ASM_CONST(0x0000000000000200)
+#define CPU_FTR_CAN_NAP			ASM_CONST(0x0000000000000400)
+#define CPU_FTR_L3CR			ASM_CONST(0x0000000000000800)
+#define CPU_FTR_L3_DISABLE_NAP		ASM_CONST(0x0000000000001000)
+#define CPU_FTR_NAP_DISABLE_L2_PR	ASM_CONST(0x0000000000002000)
+#define CPU_FTR_DUAL_PLL_750FX		ASM_CONST(0x0000000000004000)
+#define CPU_FTR_NO_DPM			ASM_CONST(0x0000000000008000)
+#define CPU_FTR_HAS_HIGH_BATS		ASM_CONST(0x0000000000010000)
+#define CPU_FTR_NEED_COHERENT		ASM_CONST(0x0000000000020000)
+#define CPU_FTR_NO_BTIC			ASM_CONST(0x0000000000040000)
+#define CPU_FTR_BIG_PHYS		ASM_CONST(0x0000000000080000)
+#define CPU_FTR_NODSISRALIGN		ASM_CONST(0x0000000000100000)
+#define CPU_FTR_PPC_LE			ASM_CONST(0x0000000000200000)
+#define CPU_FTR_REAL_LE			ASM_CONST(0x0000000000400000)
+#define CPU_FTR_FPU_UNAVAILABLE		ASM_CONST(0x0000000000800000)
+#define CPU_FTR_UNIFIED_ID_CACHE	ASM_CONST(0x0000000001000000)
+#define CPU_FTR_SPE			ASM_CONST(0x0000000002000000)
+#define CPU_FTR_NEED_PAIRED_STWCX	ASM_CONST(0x0000000004000000)
+#define CPU_FTR_LWSYNC			ASM_CONST(0x0000000008000000)
+
+/*
+ * Add the 64-bit processor unique features in the top half of the word;
+ * on 32-bit, make the names available but defined to be 0.
+ */
+#ifdef __powerpc64__
+#define LONG_ASM_CONST(x)		ASM_CONST(x)
+#else
+#define LONG_ASM_CONST(x)		0
+#endif
+
+#define CPU_FTR_SLB			LONG_ASM_CONST(0x0000000100000000)
+#define CPU_FTR_16M_PAGE		LONG_ASM_CONST(0x0000000200000000)
+#define CPU_FTR_TLBIEL			LONG_ASM_CONST(0x0000000400000000)
+#define CPU_FTR_NOEXECUTE		LONG_ASM_CONST(0x0000000800000000)
+#define CPU_FTR_IABR			LONG_ASM_CONST(0x0000002000000000)
+#define CPU_FTR_MMCRA			LONG_ASM_CONST(0x0000004000000000)
+#define CPU_FTR_CTRL			LONG_ASM_CONST(0x0000008000000000)
+#define CPU_FTR_SMT			LONG_ASM_CONST(0x0000010000000000)
+#define CPU_FTR_LOCKLESS_TLBIE		LONG_ASM_CONST(0x0000040000000000)
+#define CPU_FTR_CI_LARGE_PAGE		LONG_ASM_CONST(0x0000100000000000)
+#define CPU_FTR_PAUSE_ZERO		LONG_ASM_CONST(0x0000200000000000)
+#define CPU_FTR_PURR			LONG_ASM_CONST(0x0000400000000000)
+#define CPU_FTR_CELL_TB_BUG		LONG_ASM_CONST(0x0000800000000000)
+#define CPU_FTR_SPURR			LONG_ASM_CONST(0x0001000000000000)
+#define CPU_FTR_DSCR			LONG_ASM_CONST(0x0002000000000000)
+#define CPU_FTR_1T_SEGMENT		LONG_ASM_CONST(0x0004000000000000)
+#define CPU_FTR_NO_SLBIE_B		LONG_ASM_CONST(0x0008000000000000)
+#define CPU_FTR_VSX			LONG_ASM_CONST(0x0010000000000000)
+#define CPU_FTR_SAO			LONG_ASM_CONST(0x0020000000000000)
+
+#ifndef __ASSEMBLY__
+
+#define CPU_FTR_PPCAS_ARCH_V2	(CPU_FTR_SLB | \
+				 CPU_FTR_TLBIEL | CPU_FTR_NOEXECUTE | \
+				 CPU_FTR_NODSISRALIGN | CPU_FTR_16M_PAGE)
+
+/* We only set the altivec features if the kernel was compiled with altivec
+ * support
+ */
+#ifdef CONFIG_ALTIVEC
+#define CPU_FTR_ALTIVEC_COMP	CPU_FTR_ALTIVEC
+#define PPC_FEATURE_HAS_ALTIVEC_COMP PPC_FEATURE_HAS_ALTIVEC
+#else
+#define CPU_FTR_ALTIVEC_COMP	0
+#define PPC_FEATURE_HAS_ALTIVEC_COMP    0
+#endif
+
+/* We only set the VSX features if the kernel was compiled with VSX
+ * support
+ */
+#ifdef CONFIG_VSX
+#define CPU_FTR_VSX_COMP	CPU_FTR_VSX
+#define PPC_FEATURE_HAS_VSX_COMP PPC_FEATURE_HAS_VSX
+#else
+#define CPU_FTR_VSX_COMP	0
+#define PPC_FEATURE_HAS_VSX_COMP    0
+#endif
+
+/* We only set the spe features if the kernel was compiled with spe
+ * support
+ */
+#ifdef CONFIG_SPE
+#define CPU_FTR_SPE_COMP	CPU_FTR_SPE
+#define PPC_FEATURE_HAS_SPE_COMP PPC_FEATURE_HAS_SPE
+#define PPC_FEATURE_HAS_EFP_SINGLE_COMP PPC_FEATURE_HAS_EFP_SINGLE
+#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP PPC_FEATURE_HAS_EFP_DOUBLE
+#else
+#define CPU_FTR_SPE_COMP	0
+#define PPC_FEATURE_HAS_SPE_COMP    0
+#define PPC_FEATURE_HAS_EFP_SINGLE_COMP 0
+#define PPC_FEATURE_HAS_EFP_DOUBLE_COMP 0
+#endif
+
+/* We need to mark all pages as being coherent if we're SMP or we have a
+ * 74[45]x and an MPC107 host bridge. Also 83xx and PowerQUICC II
+ * require it for PCI "streaming/prefetch" to work properly.
+ */
+#if defined(CONFIG_SMP) || defined(CONFIG_MPC10X_BRIDGE) \
+	|| defined(CONFIG_PPC_83xx) || defined(CONFIG_8260)
+#define CPU_FTR_COMMON                  CPU_FTR_NEED_COHERENT
+#else
+#define CPU_FTR_COMMON                  0
+#endif
+
+/* The powersave features NAP & DOZE seems to confuse BDI when
+   debugging. So if a BDI is used, disable theses
+ */
+#ifndef CONFIG_BDI_SWITCH
+#define CPU_FTR_MAYBE_CAN_DOZE	CPU_FTR_CAN_DOZE
+#define CPU_FTR_MAYBE_CAN_NAP	CPU_FTR_CAN_NAP
+#else
+#define CPU_FTR_MAYBE_CAN_DOZE	0
+#define CPU_FTR_MAYBE_CAN_NAP	0
+#endif
+
+#define CLASSIC_PPC (!defined(CONFIG_8xx) && !defined(CONFIG_4xx) && \
+		     !defined(CONFIG_POWER3) && !defined(CONFIG_POWER4) && \
+		     !defined(CONFIG_BOOKE))
+
+#define CPU_FTRS_PPC601	(CPU_FTR_COMMON | CPU_FTR_601 | CPU_FTR_HPTE_TABLE | \
+	CPU_FTR_COHERENT_ICACHE | CPU_FTR_UNIFIED_ID_CACHE)
+#define CPU_FTRS_603	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
+#define CPU_FTRS_604	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_PPC_LE)
+#define CPU_FTRS_740_NOTAU	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
+#define CPU_FTRS_740	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+	    CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
+	    CPU_FTR_PPC_LE)
+#define CPU_FTRS_750	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+	    CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
+	    CPU_FTR_PPC_LE)
+#define CPU_FTRS_750CL	(CPU_FTRS_750 | CPU_FTR_HAS_HIGH_BATS)
+#define CPU_FTRS_750FX1	(CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM)
+#define CPU_FTRS_750FX2	(CPU_FTRS_750 | CPU_FTR_NO_DPM)
+#define CPU_FTRS_750FX	(CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | \
+		CPU_FTR_HAS_HIGH_BATS)
+#define CPU_FTRS_750GX	(CPU_FTRS_750FX)
+#define CPU_FTRS_7400_NOTAU	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
+#define CPU_FTRS_7400	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
+	    CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
+#define CPU_FTRS_7450_20	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7450_21	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7450_23	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
+#define CPU_FTRS_7455_1	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
+	    CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
+#define CPU_FTRS_7455_20	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_HAS_HIGH_BATS | CPU_FTR_PPC_LE)
+#define CPU_FTRS_7455	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7447_10	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC | CPU_FTR_PPC_LE | \
+	    CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7447	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7447A	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_7448	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+	    CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
+#define CPU_FTRS_82XX	(CPU_FTR_COMMON | \
+	    CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB)
+#define CPU_FTRS_G2_LE	(CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | \
+	    CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS)
+#define CPU_FTRS_E300	(CPU_FTR_MAYBE_CAN_DOZE | \
+	    CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_COMMON)
+#define CPU_FTRS_E300C2	(CPU_FTR_MAYBE_CAN_DOZE | \
+	    CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE)
+#define CPU_FTRS_CLASSIC32	(CPU_FTR_COMMON | \
+	    CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE)
+#define CPU_FTRS_8XX	(CPU_FTR_USE_TB)
+#define CPU_FTRS_40X	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_44X	(CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_E200	(CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
+	    CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \
+	    CPU_FTR_UNIFIED_ID_CACHE)
+#define CPU_FTRS_E500	(CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+	    CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_E500_2	(CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+	    CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | \
+	    CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_E500MC	(CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
+	    CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN | \
+	    CPU_FTR_L2CSR | CPU_FTR_LWSYNC)
+#define CPU_FTRS_GENERIC_32	(CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
+
+/* 64-bit CPUs */
+#define CPU_FTRS_POWER3	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | CPU_FTR_PPC_LE)
+#define CPU_FTRS_RS64	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | \
+	    CPU_FTR_MMCRA | CPU_FTR_CTRL)
+#define CPU_FTRS_POWER4	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_MMCRA)
+#define CPU_FTRS_PPC970	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA)
+#define CPU_FTRS_POWER5	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
+	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+	    CPU_FTR_PURR)
+#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
+	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
+	    CPU_FTR_DSCR)
+#define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
+	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
+	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
+	    CPU_FTR_DSCR | CPU_FTR_SAO)
+#define CPU_FTRS_CELL	(CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
+	    CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | CPU_FTR_CELL_TB_BUG)
+#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
+	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \
+	    CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B)
+#define CPU_FTRS_COMPATIBLE	(CPU_FTR_USE_TB | \
+	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2)
+
+#ifdef __powerpc64__
+#define CPU_FTRS_POSSIBLE	\
+	    (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 |	\
+	    CPU_FTRS_PPC970 | CPU_FTRS_POWER5 | CPU_FTRS_POWER6 |	\
+	    CPU_FTRS_POWER7 | CPU_FTRS_CELL | CPU_FTRS_PA6T |		\
+	    CPU_FTR_1T_SEGMENT | CPU_FTR_VSX)
+#else
+enum {
+	CPU_FTRS_POSSIBLE =
+#if CLASSIC_PPC
+	    CPU_FTRS_PPC601 | CPU_FTRS_603 | CPU_FTRS_604 | CPU_FTRS_740_NOTAU |
+	    CPU_FTRS_740 | CPU_FTRS_750 | CPU_FTRS_750FX1 |
+	    CPU_FTRS_750FX2 | CPU_FTRS_750FX | CPU_FTRS_750GX |
+	    CPU_FTRS_7400_NOTAU | CPU_FTRS_7400 | CPU_FTRS_7450_20 |
+	    CPU_FTRS_7450_21 | CPU_FTRS_7450_23 | CPU_FTRS_7455_1 |
+	    CPU_FTRS_7455_20 | CPU_FTRS_7455 | CPU_FTRS_7447_10 |
+	    CPU_FTRS_7447 | CPU_FTRS_7447A | CPU_FTRS_82XX |
+	    CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_E300C2 |
+	    CPU_FTRS_CLASSIC32 |
+#else
+	    CPU_FTRS_GENERIC_32 |
+#endif
+#ifdef CONFIG_8xx
+	    CPU_FTRS_8XX |
+#endif
+#ifdef CONFIG_40x
+	    CPU_FTRS_40X |
+#endif
+#ifdef CONFIG_44x
+	    CPU_FTRS_44X |
+#endif
+#ifdef CONFIG_E200
+	    CPU_FTRS_E200 |
+#endif
+#ifdef CONFIG_E500
+	    CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC |
+#endif
+	    0,
+};
+#endif /* __powerpc64__ */
+
+#ifdef __powerpc64__
+#define CPU_FTRS_ALWAYS		\
+	    (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 &	\
+	    CPU_FTRS_PPC970 & CPU_FTRS_POWER5 & CPU_FTRS_POWER6 &	\
+	    CPU_FTRS_POWER7 & CPU_FTRS_CELL & CPU_FTRS_PA6T & CPU_FTRS_POSSIBLE)
+#else
+enum {
+	CPU_FTRS_ALWAYS =
+#if CLASSIC_PPC
+	    CPU_FTRS_PPC601 & CPU_FTRS_603 & CPU_FTRS_604 & CPU_FTRS_740_NOTAU &
+	    CPU_FTRS_740 & CPU_FTRS_750 & CPU_FTRS_750FX1 &
+	    CPU_FTRS_750FX2 & CPU_FTRS_750FX & CPU_FTRS_750GX &
+	    CPU_FTRS_7400_NOTAU & CPU_FTRS_7400 & CPU_FTRS_7450_20 &
+	    CPU_FTRS_7450_21 & CPU_FTRS_7450_23 & CPU_FTRS_7455_1 &
+	    CPU_FTRS_7455_20 & CPU_FTRS_7455 & CPU_FTRS_7447_10 &
+	    CPU_FTRS_7447 & CPU_FTRS_7447A & CPU_FTRS_82XX &
+	    CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_E300C2 &
+	    CPU_FTRS_CLASSIC32 &
+#else
+	    CPU_FTRS_GENERIC_32 &
+#endif
+#ifdef CONFIG_8xx
+	    CPU_FTRS_8XX &
+#endif
+#ifdef CONFIG_40x
+	    CPU_FTRS_40X &
+#endif
+#ifdef CONFIG_44x
+	    CPU_FTRS_44X &
+#endif
+#ifdef CONFIG_E200
+	    CPU_FTRS_E200 &
+#endif
+#ifdef CONFIG_E500
+	    CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC &
+#endif
+	    CPU_FTRS_POSSIBLE,
+};
+#endif /* __powerpc64__ */
+
+static inline int cpu_has_feature(unsigned long feature)
+{
+	return (CPU_FTRS_ALWAYS & feature) ||
+	       (CPU_FTRS_POSSIBLE
+		& cur_cpu_spec->cpu_features
+		& feature);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_CPUTABLE_H */
diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h
new file mode 100644
index 000000000000..fb11b0c459b8
--- /dev/null
+++ b/arch/powerpc/include/asm/cputhreads.h
@@ -0,0 +1,71 @@
+#ifndef _ASM_POWERPC_CPUTHREADS_H
+#define _ASM_POWERPC_CPUTHREADS_H
+
+#include <linux/cpumask.h>
+
+/*
+ * Mapping of threads to cores
+ */
+
+#ifdef CONFIG_SMP
+extern int threads_per_core;
+extern int threads_shift;
+extern cpumask_t threads_core_mask;
+#else
+#define threads_per_core	1
+#define threads_shift		0
+#define threads_core_mask	(CPU_MASK_CPU0)
+#endif
+
+/* cpu_thread_mask_to_cores - Return a cpumask of one per cores
+ *                            hit by the argument
+ *
+ * @threads:	a cpumask of threads
+ *
+ * This function returns a cpumask which will have one "cpu" (or thread)
+ * bit set for each core that has at least one thread set in the argument.
+ *
+ * This can typically be used for things like IPI for tlb invalidations
+ * since those need to be done only once per core/TLB
+ */
+static inline cpumask_t cpu_thread_mask_to_cores(cpumask_t threads)
+{
+	cpumask_t	tmp, res;
+	int		i;
+
+	res = CPU_MASK_NONE;
+	for (i = 0; i < NR_CPUS; i += threads_per_core) {
+		cpus_shift_left(tmp, threads_core_mask, i);
+		if (cpus_intersects(threads, tmp))
+			cpu_set(i, res);
+	}
+	return res;
+}
+
+static inline int cpu_nr_cores(void)
+{
+	return NR_CPUS >> threads_shift;
+}
+
+static inline cpumask_t cpu_online_cores_map(void)
+{
+	return cpu_thread_mask_to_cores(cpu_online_map);
+}
+
+static inline int cpu_thread_to_core(int cpu)
+{
+	return cpu >> threads_shift;
+}
+
+static inline int cpu_thread_in_core(int cpu)
+{
+	return cpu & (threads_per_core - 1);
+}
+
+static inline int cpu_first_thread_in_core(int cpu)
+{
+	return cpu & ~(threads_per_core - 1);
+}
+
+#endif /* _ASM_POWERPC_CPUTHREADS_H */
+
diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h
new file mode 100644
index 000000000000..f42e623030ee
--- /dev/null
+++ b/arch/powerpc/include/asm/cputime.h
@@ -0,0 +1,235 @@
+/*
+ * Definitions for measuring cputime on powerpc machines.
+ *
+ * Copyright (C) 2006 Paul Mackerras, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * If we have CONFIG_VIRT_CPU_ACCOUNTING, we measure cpu time in
+ * the same units as the timebase.  Otherwise we measure cpu time
+ * in jiffies using the generic definitions.
+ */
+
+#ifndef __POWERPC_CPUTIME_H
+#define __POWERPC_CPUTIME_H
+
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+#include <asm-generic/cputime.h>
+#else
+
+#include <linux/types.h>
+#include <linux/time.h>
+#include <asm/div64.h>
+#include <asm/time.h>
+#include <asm/param.h>
+
+typedef u64 cputime_t;
+typedef u64 cputime64_t;
+
+#define cputime_zero			((cputime_t)0)
+#define cputime_max			((~((cputime_t)0) >> 1) - 1)
+#define cputime_add(__a, __b)		((__a) +  (__b))
+#define cputime_sub(__a, __b)		((__a) -  (__b))
+#define cputime_div(__a, __n)		((__a) /  (__n))
+#define cputime_halve(__a)		((__a) >> 1)
+#define cputime_eq(__a, __b)		((__a) == (__b))
+#define cputime_gt(__a, __b)		((__a) >  (__b))
+#define cputime_ge(__a, __b)		((__a) >= (__b))
+#define cputime_lt(__a, __b)		((__a) <  (__b))
+#define cputime_le(__a, __b)		((__a) <= (__b))
+
+#define cputime64_zero			((cputime64_t)0)
+#define cputime64_add(__a, __b)		((__a) + (__b))
+#define cputime64_sub(__a, __b)		((__a) - (__b))
+#define cputime_to_cputime64(__ct)	(__ct)
+
+#ifdef __KERNEL__
+
+/*
+ * Convert cputime <-> jiffies
+ */
+extern u64 __cputime_jiffies_factor;
+DECLARE_PER_CPU(unsigned long, cputime_last_delta);
+DECLARE_PER_CPU(unsigned long, cputime_scaled_last_delta);
+
+static inline unsigned long cputime_to_jiffies(const cputime_t ct)
+{
+	return mulhdu(ct, __cputime_jiffies_factor);
+}
+
+/* Estimate the scaled cputime by scaling the real cputime based on
+ * the last scaled to real ratio */
+static inline cputime_t cputime_to_scaled(const cputime_t ct)
+{
+	if (cpu_has_feature(CPU_FTR_SPURR) &&
+	    per_cpu(cputime_last_delta, smp_processor_id()))
+		return ct *
+			per_cpu(cputime_scaled_last_delta, smp_processor_id())/
+			per_cpu(cputime_last_delta, smp_processor_id());
+	return ct;
+}
+
+static inline cputime_t jiffies_to_cputime(const unsigned long jif)
+{
+	cputime_t ct;
+	unsigned long sec;
+
+	/* have to be a little careful about overflow */
+	ct = jif % HZ;
+	sec = jif / HZ;
+	if (ct) {
+		ct *= tb_ticks_per_sec;
+		do_div(ct, HZ);
+	}
+	if (sec)
+		ct += (cputime_t) sec * tb_ticks_per_sec;
+	return ct;
+}
+
+static inline cputime64_t jiffies64_to_cputime64(const u64 jif)
+{
+	cputime_t ct;
+	u64 sec;
+
+	/* have to be a little careful about overflow */
+	ct = jif % HZ;
+	sec = jif / HZ;
+	if (ct) {
+		ct *= tb_ticks_per_sec;
+		do_div(ct, HZ);
+	}
+	if (sec)
+		ct += (cputime_t) sec * tb_ticks_per_sec;
+	return ct;
+}
+
+static inline u64 cputime64_to_jiffies64(const cputime_t ct)
+{
+	return mulhdu(ct, __cputime_jiffies_factor);
+}
+
+/*
+ * Convert cputime <-> milliseconds
+ */
+extern u64 __cputime_msec_factor;
+
+static inline unsigned long cputime_to_msecs(const cputime_t ct)
+{
+	return mulhdu(ct, __cputime_msec_factor);
+}
+
+static inline cputime_t msecs_to_cputime(const unsigned long ms)
+{
+	cputime_t ct;
+	unsigned long sec;
+
+	/* have to be a little careful about overflow */
+	ct = ms % 1000;
+	sec = ms / 1000;
+	if (ct) {
+		ct *= tb_ticks_per_sec;
+		do_div(ct, 1000);
+	}
+	if (sec)
+		ct += (cputime_t) sec * tb_ticks_per_sec;
+	return ct;
+}
+
+/*
+ * Convert cputime <-> seconds
+ */
+extern u64 __cputime_sec_factor;
+
+static inline unsigned long cputime_to_secs(const cputime_t ct)
+{
+	return mulhdu(ct, __cputime_sec_factor);
+}
+
+static inline cputime_t secs_to_cputime(const unsigned long sec)
+{
+	return (cputime_t) sec * tb_ticks_per_sec;
+}
+
+/*
+ * Convert cputime <-> timespec
+ */
+static inline void cputime_to_timespec(const cputime_t ct, struct timespec *p)
+{
+	u64 x = ct;
+	unsigned int frac;
+
+	frac = do_div(x, tb_ticks_per_sec);
+	p->tv_sec = x;
+	x = (u64) frac * 1000000000;
+	do_div(x, tb_ticks_per_sec);
+	p->tv_nsec = x;
+}
+
+static inline cputime_t timespec_to_cputime(const struct timespec *p)
+{
+	cputime_t ct;
+
+	ct = (u64) p->tv_nsec * tb_ticks_per_sec;
+	do_div(ct, 1000000000);
+	return ct + (u64) p->tv_sec * tb_ticks_per_sec;
+}
+
+/*
+ * Convert cputime <-> timeval
+ */
+static inline void cputime_to_timeval(const cputime_t ct, struct timeval *p)
+{
+	u64 x = ct;
+	unsigned int frac;
+
+	frac = do_div(x, tb_ticks_per_sec);
+	p->tv_sec = x;
+	x = (u64) frac * 1000000;
+	do_div(x, tb_ticks_per_sec);
+	p->tv_usec = x;
+}
+
+static inline cputime_t timeval_to_cputime(const struct timeval *p)
+{
+	cputime_t ct;
+
+	ct = (u64) p->tv_usec * tb_ticks_per_sec;
+	do_div(ct, 1000000);
+	return ct + (u64) p->tv_sec * tb_ticks_per_sec;
+}
+
+/*
+ * Convert cputime <-> clock_t (units of 1/USER_HZ seconds)
+ */
+extern u64 __cputime_clockt_factor;
+
+static inline unsigned long cputime_to_clock_t(const cputime_t ct)
+{
+	return mulhdu(ct, __cputime_clockt_factor);
+}
+
+static inline cputime_t clock_t_to_cputime(const unsigned long clk)
+{
+	cputime_t ct;
+	unsigned long sec;
+
+	/* have to be a little careful about overflow */
+	ct = clk % USER_HZ;
+	sec = clk / USER_HZ;
+	if (ct) {
+		ct *= tb_ticks_per_sec;
+		do_div(ct, USER_HZ);
+	}
+	if (sec)
+		ct += (cputime_t) sec * tb_ticks_per_sec;
+	return ct;
+}
+
+#define cputime64_to_clock_t(ct)	cputime_to_clock_t((cputime_t)(ct))
+
+#endif /* __KERNEL__ */
+#endif /* CONFIG_VIRT_CPU_ACCOUNTING */
+#endif /* __POWERPC_CPUTIME_H */
diff --git a/arch/powerpc/include/asm/current.h b/arch/powerpc/include/asm/current.h
new file mode 100644
index 000000000000..e2c7f06931e7
--- /dev/null
+++ b/arch/powerpc/include/asm/current.h
@@ -0,0 +1,40 @@
+#ifndef _ASM_POWERPC_CURRENT_H
+#define _ASM_POWERPC_CURRENT_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+struct task_struct;
+
+#ifdef __powerpc64__
+#include <linux/stddef.h>
+#include <asm/paca.h>
+
+static inline struct task_struct *get_current(void)
+{
+	struct task_struct *task;
+
+	__asm__ __volatile__("ld %0,%1(13)"
+	: "=r" (task)
+	: "i" (offsetof(struct paca_struct, __current)));
+
+	return task;
+}
+#define current	get_current()
+
+#else
+
+/*
+ * We keep `current' in r2 for speed.
+ */
+register struct task_struct *current asm ("r2");
+
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_CURRENT_H */
diff --git a/arch/powerpc/include/asm/dbdma.h b/arch/powerpc/include/asm/dbdma.h
new file mode 100644
index 000000000000..e23f07e73cb3
--- /dev/null
+++ b/arch/powerpc/include/asm/dbdma.h
@@ -0,0 +1,108 @@
+/*
+ * Definitions for using the Apple Descriptor-Based DMA controller
+ * in Power Macintosh computers.
+ *
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+
+#ifdef __KERNEL__
+#ifndef _ASM_DBDMA_H_
+#define _ASM_DBDMA_H_
+/*
+ * DBDMA control/status registers.  All little-endian.
+ */
+struct dbdma_regs {
+    unsigned int control;	/* lets you change bits in status */
+    unsigned int status;	/* DMA and device status bits (see below) */
+    unsigned int cmdptr_hi;	/* upper 32 bits of command address */
+    unsigned int cmdptr;	/* (lower 32 bits of) command address (phys) */
+    unsigned int intr_sel;	/* select interrupt condition bit */
+    unsigned int br_sel;	/* select branch condition bit */
+    unsigned int wait_sel;	/* select wait condition bit */
+    unsigned int xfer_mode;
+    unsigned int data2ptr_hi;
+    unsigned int data2ptr;
+    unsigned int res1;
+    unsigned int address_hi;
+    unsigned int br_addr_hi;
+    unsigned int res2[3];
+};
+
+/* Bits in control and status registers */
+#define RUN	0x8000
+#define PAUSE	0x4000
+#define FLUSH	0x2000
+#define WAKE	0x1000
+#define DEAD	0x0800
+#define ACTIVE	0x0400
+#define BT	0x0100
+#define DEVSTAT	0x00ff
+
+/*
+ * DBDMA command structure.  These fields are all little-endian!
+ */
+struct dbdma_cmd {
+    unsigned short req_count;	/* requested byte transfer count */
+    unsigned short command;	/* command word (has bit-fields) */
+    unsigned int   phy_addr;	/* physical data address */
+    unsigned int   cmd_dep;	/* command-dependent field */
+    unsigned short res_count;	/* residual count after completion */
+    unsigned short xfer_status;	/* transfer status */
+};
+
+/* DBDMA command values in command field */
+#define OUTPUT_MORE	0	/* transfer memory data to stream */
+#define OUTPUT_LAST	0x1000	/* ditto followed by end marker */
+#define INPUT_MORE	0x2000	/* transfer stream data to memory */
+#define INPUT_LAST	0x3000	/* ditto, expect end marker */
+#define STORE_WORD	0x4000	/* write word (4 bytes) to device reg */
+#define LOAD_WORD	0x5000	/* read word (4 bytes) from device reg */
+#define DBDMA_NOP	0x6000	/* do nothing */
+#define DBDMA_STOP	0x7000	/* suspend processing */
+
+/* Key values in command field */
+#define KEY_STREAM0	0	/* usual data stream */
+#define KEY_STREAM1	0x100	/* control/status stream */
+#define KEY_STREAM2	0x200	/* device-dependent stream */
+#define KEY_STREAM3	0x300	/* device-dependent stream */
+#define KEY_REGS	0x500	/* device register space */
+#define KEY_SYSTEM	0x600	/* system memory-mapped space */
+#define KEY_DEVICE	0x700	/* device memory-mapped space */
+
+/* Interrupt control values in command field */
+#define INTR_NEVER	0	/* don't interrupt */
+#define INTR_IFSET	0x10	/* intr if condition bit is 1 */
+#define INTR_IFCLR	0x20	/* intr if condition bit is 0 */
+#define INTR_ALWAYS	0x30	/* always interrupt */
+
+/* Branch control values in command field */
+#define BR_NEVER	0	/* don't branch */
+#define BR_IFSET	0x4	/* branch if condition bit is 1 */
+#define BR_IFCLR	0x8	/* branch if condition bit is 0 */
+#define BR_ALWAYS	0xc	/* always branch */
+
+/* Wait control values in command field */
+#define WAIT_NEVER	0	/* don't wait */
+#define WAIT_IFSET	1	/* wait if condition bit is 1 */
+#define WAIT_IFCLR	2	/* wait if condition bit is 0 */
+#define WAIT_ALWAYS	3	/* always wait */
+
+/* Align an address for a DBDMA command structure */
+#define DBDMA_ALIGN(x)	(((unsigned long)(x) + sizeof(struct dbdma_cmd) - 1) \
+			 & -sizeof(struct dbdma_cmd))
+
+/* Useful macros */
+#define DBDMA_DO_STOP(regs) do {				\
+	out_le32(&((regs)->control), (RUN|FLUSH)<<16);		\
+	while(in_le32(&((regs)->status)) & (ACTIVE|FLUSH))	\
+		; \
+} while(0)
+
+#define DBDMA_DO_RESET(regs) do {				\
+	out_le32(&((regs)->control), (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16);\
+	while(in_le32(&((regs)->status)) & (RUN)) \
+		; \
+} while(0)
+
+#endif /* _ASM_DBDMA_H_ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/dcr-generic.h b/arch/powerpc/include/asm/dcr-generic.h
new file mode 100644
index 000000000000..35b71599ec46
--- /dev/null
+++ b/arch/powerpc/include/asm/dcr-generic.h
@@ -0,0 +1,49 @@
+/*
+ * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                    <benh@kernel.crashing.org>
+ *
+ *   This program is free software;  you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program;  if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_DCR_GENERIC_H
+#define _ASM_POWERPC_DCR_GENERIC_H
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+enum host_type_t {DCR_HOST_MMIO, DCR_HOST_NATIVE, DCR_HOST_INVALID};
+
+typedef struct {
+	enum host_type_t type;
+	union {
+		dcr_host_mmio_t mmio;
+		dcr_host_native_t native;
+	} host;
+} dcr_host_t;
+
+extern bool dcr_map_ok_generic(dcr_host_t host);
+
+extern dcr_host_t dcr_map_generic(struct device_node *dev, unsigned int dcr_n,
+			  unsigned int dcr_c);
+extern void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c);
+
+extern u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n);
+
+extern void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DCR_GENERIC_H */
+
+
diff --git a/arch/powerpc/include/asm/dcr-mmio.h b/arch/powerpc/include/asm/dcr-mmio.h
new file mode 100644
index 000000000000..acd491dbd45a
--- /dev/null
+++ b/arch/powerpc/include/asm/dcr-mmio.h
@@ -0,0 +1,61 @@
+/*
+ * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                    <benh@kernel.crashing.org>
+ *
+ *   This program is free software;  you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program;  if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_DCR_MMIO_H
+#define _ASM_POWERPC_DCR_MMIO_H
+#ifdef __KERNEL__
+
+#include <asm/io.h>
+
+typedef struct {
+	void __iomem *token;
+	unsigned int stride;
+	unsigned int base;
+} dcr_host_mmio_t;
+
+static inline bool dcr_map_ok_mmio(dcr_host_mmio_t host)
+{
+	return host.token != NULL;
+}
+
+extern dcr_host_mmio_t dcr_map_mmio(struct device_node *dev,
+				    unsigned int dcr_n,
+				    unsigned int dcr_c);
+extern void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c);
+
+static inline u32 dcr_read_mmio(dcr_host_mmio_t host, unsigned int dcr_n)
+{
+	return in_be32(host.token + ((host.base + dcr_n) * host.stride));
+}
+
+static inline void dcr_write_mmio(dcr_host_mmio_t host,
+				  unsigned int dcr_n,
+				  u32 value)
+{
+	out_be32(host.token + ((host.base + dcr_n) * host.stride), value);
+}
+
+extern u64 of_translate_dcr_address(struct device_node *dev,
+				    unsigned int dcr_n,
+				    unsigned int *stride);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DCR_MMIO_H */
+
+
diff --git a/arch/powerpc/include/asm/dcr-native.h b/arch/powerpc/include/asm/dcr-native.h
new file mode 100644
index 000000000000..72d2b72c7390
--- /dev/null
+++ b/arch/powerpc/include/asm/dcr-native.h
@@ -0,0 +1,116 @@
+/*
+ * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                    <benh@kernel.crashing.org>
+ *
+ *   This program is free software;  you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program;  if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_DCR_NATIVE_H
+#define _ASM_POWERPC_DCR_NATIVE_H
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/spinlock.h>
+
+typedef struct {
+	unsigned int base;
+} dcr_host_native_t;
+
+static inline bool dcr_map_ok_native(dcr_host_native_t host)
+{
+	return 1;
+}
+
+#define dcr_map_native(dev, dcr_n, dcr_c) \
+	((dcr_host_native_t){ .base = (dcr_n) })
+#define dcr_unmap_native(host, dcr_c)		do {} while (0)
+#define dcr_read_native(host, dcr_n)		mfdcr(dcr_n + host.base)
+#define dcr_write_native(host, dcr_n, value)	mtdcr(dcr_n + host.base, value)
+
+/* Device Control Registers */
+void __mtdcr(int reg, unsigned int val);
+unsigned int __mfdcr(int reg);
+#define mfdcr(rn)						\
+	({unsigned int rval;					\
+	if (__builtin_constant_p(rn))				\
+		asm volatile("mfdcr %0," __stringify(rn)	\
+		              : "=r" (rval));			\
+	else							\
+		rval = __mfdcr(rn);				\
+	rval;})
+
+#define mtdcr(rn, v)						\
+do {								\
+	if (__builtin_constant_p(rn))				\
+		asm volatile("mtdcr " __stringify(rn) ",%0"	\
+			      : : "r" (v)); 			\
+	else							\
+		__mtdcr(rn, v);					\
+} while (0)
+
+/* R/W of indirect DCRs make use of standard naming conventions for DCRs */
+extern spinlock_t dcr_ind_lock;
+
+static inline unsigned __mfdcri(int base_addr, int base_data, int reg)
+{
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&dcr_ind_lock, flags);
+	__mtdcr(base_addr, reg);
+	val = __mfdcr(base_data);
+	spin_unlock_irqrestore(&dcr_ind_lock, flags);
+	return val;
+}
+
+static inline void __mtdcri(int base_addr, int base_data, int reg,
+			    unsigned val)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&dcr_ind_lock, flags);
+	__mtdcr(base_addr, reg);
+	__mtdcr(base_data, val);
+	spin_unlock_irqrestore(&dcr_ind_lock, flags);
+}
+
+static inline void __dcri_clrset(int base_addr, int base_data, int reg,
+				 unsigned clr, unsigned set)
+{
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&dcr_ind_lock, flags);
+	__mtdcr(base_addr, reg);
+	val = (__mfdcr(base_data) & ~clr) | set;
+	__mtdcr(base_data, val);
+	spin_unlock_irqrestore(&dcr_ind_lock, flags);
+}
+
+#define mfdcri(base, reg)	__mfdcri(DCRN_ ## base ## _CONFIG_ADDR,	\
+					 DCRN_ ## base ## _CONFIG_DATA,	\
+					 reg)
+
+#define mtdcri(base, reg, data)	__mtdcri(DCRN_ ## base ## _CONFIG_ADDR,	\
+					 DCRN_ ## base ## _CONFIG_DATA,	\
+					 reg, data)
+
+#define dcri_clrset(base, reg, clr, set)	__dcri_clrset(DCRN_ ## base ## _CONFIG_ADDR,	\
+							      DCRN_ ## base ## _CONFIG_DATA,	\
+							      reg, clr, set)
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DCR_NATIVE_H */
diff --git a/arch/powerpc/include/asm/dcr-regs.h b/arch/powerpc/include/asm/dcr-regs.h
new file mode 100644
index 000000000000..29b0ecef980a
--- /dev/null
+++ b/arch/powerpc/include/asm/dcr-regs.h
@@ -0,0 +1,149 @@
+/*
+ * Common DCR / SDR / CPR register definitions used on various IBM/AMCC
+ * 4xx processors
+ *
+ *    Copyright 2007 Benjamin Herrenschmidt, IBM Corp
+ *                   <benh@kernel.crashing.org>
+ *
+ * Mostly lifted from asm-ppc/ibm4xx.h by
+ *
+ *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
+ *
+ */
+
+#ifndef __DCR_REGS_H__
+#define __DCR_REGS_H__
+
+/*
+ * Most DCRs used for controlling devices such as the MAL, DMA engine,
+ * etc... are obtained for the device tree.
+ *
+ * The definitions in this files are fixed DCRs and indirect DCRs that
+ * are commonly used outside of specific drivers or refer to core
+ * common registers that may occasionally have to be tweaked outside
+ * of the driver main register set
+ */
+
+/* CPRs (440GX and 440SP/440SPe) */
+#define DCRN_CPR0_CONFIG_ADDR	0xc
+#define DCRN_CPR0_CONFIG_DATA	0xd
+
+/* SDRs (440GX and 440SP/440SPe) */
+#define DCRN_SDR0_CONFIG_ADDR 	0xe
+#define DCRN_SDR0_CONFIG_DATA	0xf
+
+#define SDR0_PFC0		0x4100
+#define SDR0_PFC1		0x4101
+#define SDR0_PFC1_EPS		0x1c00000
+#define SDR0_PFC1_EPS_SHIFT	22
+#define SDR0_PFC1_RMII		0x02000000
+#define SDR0_MFR		0x4300
+#define SDR0_MFR_TAH0 		0x80000000  	/* TAHOE0 Enable */
+#define SDR0_MFR_TAH1 		0x40000000  	/* TAHOE1 Enable */
+#define SDR0_MFR_PCM  		0x10000000  	/* PPC440GP irq compat mode */
+#define SDR0_MFR_ECS  		0x08000000  	/* EMAC int clk */
+#define SDR0_MFR_T0TXFL		0x00080000
+#define SDR0_MFR_T0TXFH		0x00040000
+#define SDR0_MFR_T1TXFL		0x00020000
+#define SDR0_MFR_T1TXFH		0x00010000
+#define SDR0_MFR_E0TXFL		0x00008000
+#define SDR0_MFR_E0TXFH		0x00004000
+#define SDR0_MFR_E0RXFL		0x00002000
+#define SDR0_MFR_E0RXFH		0x00001000
+#define SDR0_MFR_E1TXFL		0x00000800
+#define SDR0_MFR_E1TXFH		0x00000400
+#define SDR0_MFR_E1RXFL		0x00000200
+#define SDR0_MFR_E1RXFH		0x00000100
+#define SDR0_MFR_E2TXFL		0x00000080
+#define SDR0_MFR_E2TXFH		0x00000040
+#define SDR0_MFR_E2RXFL		0x00000020
+#define SDR0_MFR_E2RXFH		0x00000010
+#define SDR0_MFR_E3TXFL		0x00000008
+#define SDR0_MFR_E3TXFH		0x00000004
+#define SDR0_MFR_E3RXFL		0x00000002
+#define SDR0_MFR_E3RXFH		0x00000001
+#define SDR0_UART0		0x0120
+#define SDR0_UART1		0x0121
+#define SDR0_UART2		0x0122
+#define SDR0_UART3		0x0123
+#define SDR0_CUST0		0x4000
+
+/*
+ * All those DCR register addresses are offsets from the base address
+ * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is
+ * excluded here and configured in the device tree.
+ */
+#define DCRN_SRAM0_SB0CR	0x00
+#define DCRN_SRAM0_SB1CR	0x01
+#define DCRN_SRAM0_SB2CR	0x02
+#define DCRN_SRAM0_SB3CR	0x03
+#define  SRAM_SBCR_BU_MASK	0x00000180
+#define  SRAM_SBCR_BS_64KB	0x00000800
+#define  SRAM_SBCR_BU_RO	0x00000080
+#define  SRAM_SBCR_BU_RW	0x00000180
+#define DCRN_SRAM0_BEAR		0x04
+#define DCRN_SRAM0_BESR0	0x05
+#define DCRN_SRAM0_BESR1	0x06
+#define DCRN_SRAM0_PMEG		0x07
+#define DCRN_SRAM0_CID		0x08
+#define DCRN_SRAM0_REVID	0x09
+#define DCRN_SRAM0_DPC		0x0a
+#define  SRAM_DPC_ENABLE	0x80000000
+
+/*
+ * All those DCR register addresses are offsets from the base address
+ * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is
+ * excluded here and configured in the device tree.
+ */
+#define DCRN_L2C0_CFG		0x00
+#define  L2C_CFG_L2M		0x80000000
+#define  L2C_CFG_ICU		0x40000000
+#define  L2C_CFG_DCU		0x20000000
+#define  L2C_CFG_DCW_MASK	0x1e000000
+#define  L2C_CFG_TPC		0x01000000
+#define  L2C_CFG_CPC		0x00800000
+#define  L2C_CFG_FRAN		0x00200000
+#define  L2C_CFG_SS_MASK	0x00180000
+#define  L2C_CFG_SS_256		0x00000000
+#define  L2C_CFG_CPIM		0x00040000
+#define  L2C_CFG_TPIM		0x00020000
+#define  L2C_CFG_LIM		0x00010000
+#define  L2C_CFG_PMUX_MASK	0x00007000
+#define  L2C_CFG_PMUX_SNP	0x00000000
+#define  L2C_CFG_PMUX_IF	0x00001000
+#define  L2C_CFG_PMUX_DF	0x00002000
+#define  L2C_CFG_PMUX_DS	0x00003000
+#define  L2C_CFG_PMIM		0x00000800
+#define  L2C_CFG_TPEI		0x00000400
+#define  L2C_CFG_CPEI		0x00000200
+#define  L2C_CFG_NAM		0x00000100
+#define  L2C_CFG_SMCM		0x00000080
+#define  L2C_CFG_NBRM		0x00000040
+#define  L2C_CFG_RDBW		0x00000008	/* only 460EX/GT */
+#define DCRN_L2C0_CMD		0x01
+#define  L2C_CMD_CLR		0x80000000
+#define  L2C_CMD_DIAG		0x40000000
+#define  L2C_CMD_INV		0x20000000
+#define  L2C_CMD_CCP		0x10000000
+#define  L2C_CMD_CTE		0x08000000
+#define  L2C_CMD_STRC		0x04000000
+#define  L2C_CMD_STPC		0x02000000
+#define  L2C_CMD_RPMC		0x01000000
+#define  L2C_CMD_HCC		0x00800000
+#define DCRN_L2C0_ADDR		0x02
+#define DCRN_L2C0_DATA		0x03
+#define DCRN_L2C0_SR		0x04
+#define  L2C_SR_CC		0x80000000
+#define  L2C_SR_CPE		0x40000000
+#define  L2C_SR_TPE		0x20000000
+#define  L2C_SR_LRU		0x10000000
+#define  L2C_SR_PCS		0x08000000
+#define DCRN_L2C0_REVID		0x05
+#define DCRN_L2C0_SNP0		0x06
+#define DCRN_L2C0_SNP1		0x07
+#define  L2C_SNP_BA_MASK	0xffff0000
+#define  L2C_SNP_SSR_MASK	0x0000f000
+#define  L2C_SNP_SSR_32G	0x0000f000
+#define  L2C_SNP_ESR		0x00000800
+
+#endif /* __DCR_REGS_H__ */
diff --git a/arch/powerpc/include/asm/dcr.h b/arch/powerpc/include/asm/dcr.h
new file mode 100644
index 000000000000..d13fb68bb5c0
--- /dev/null
+++ b/arch/powerpc/include/asm/dcr.h
@@ -0,0 +1,78 @@
+/*
+ * (c) Copyright 2006 Benjamin Herrenschmidt, IBM Corp.
+ *                    <benh@kernel.crashing.org>
+ *
+ *   This program is free software;  you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ *   the GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program;  if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_DCR_H
+#define _ASM_POWERPC_DCR_H
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_PPC_DCR
+
+#ifdef CONFIG_PPC_DCR_NATIVE
+#include <asm/dcr-native.h>
+#endif
+
+#ifdef CONFIG_PPC_DCR_MMIO
+#include <asm/dcr-mmio.h>
+#endif
+
+
+/* Indirection layer for providing both NATIVE and MMIO support. */
+
+#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO)
+
+#include <asm/dcr-generic.h>
+
+#define DCR_MAP_OK(host)	dcr_map_ok_generic(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_generic(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_generic(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_generic(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_generic(host, dcr_n, value)
+
+#else
+
+#ifdef CONFIG_PPC_DCR_NATIVE
+typedef dcr_host_native_t dcr_host_t;
+#define DCR_MAP_OK(host)	dcr_map_ok_native(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_native(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_native(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_native(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_native(host, dcr_n, value)
+#else
+typedef dcr_host_mmio_t dcr_host_t;
+#define DCR_MAP_OK(host)	dcr_map_ok_mmio(host)
+#define dcr_map(dev, dcr_n, dcr_c) dcr_map_mmio(dev, dcr_n, dcr_c)
+#define dcr_unmap(host, dcr_c) dcr_unmap_mmio(host, dcr_c)
+#define dcr_read(host, dcr_n) dcr_read_mmio(host, dcr_n)
+#define dcr_write(host, dcr_n, value) dcr_write_mmio(host, dcr_n, value)
+#endif
+
+#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
+
+/*
+ * additional helpers to read the DCR * base from the device-tree
+ */
+struct device_node;
+extern unsigned int dcr_resource_start(struct device_node *np,
+				       unsigned int index);
+extern unsigned int dcr_resource_len(struct device_node *np,
+				     unsigned int index);
+#endif /* CONFIG_PPC_DCR */
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DCR_H */
diff --git a/arch/powerpc/include/asm/delay.h b/arch/powerpc/include/asm/delay.h
new file mode 100644
index 000000000000..f9200a65c632
--- /dev/null
+++ b/arch/powerpc/include/asm/delay.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_POWERPC_DELAY_H
+#define _ASM_POWERPC_DELAY_H
+#ifdef __KERNEL__
+
+/*
+ * Copyright 1996, Paul Mackerras.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * PPC64 Support added by Dave Engebretsen, Todd Inglett, Mike Corrigan,
+ * Anton Blanchard.
+ */
+
+extern void __delay(unsigned long loops);
+extern void udelay(unsigned long usecs);
+
+/*
+ * On shared processor machines the generic implementation of mdelay can
+ * result in large errors. While each iteration of the loop inside mdelay
+ * is supposed to take 1ms, the hypervisor could sleep our partition for
+ * longer (eg 10ms). With the right timing these errors can add up.
+ *
+ * Since there is no 32bit overflow issue on 64bit kernels, just call
+ * udelay directly.
+ */
+#ifdef CONFIG_PPC64
+#define mdelay(n)	udelay((n) * 1000)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_DELAY_H */
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
new file mode 100644
index 000000000000..228ab2a315b9
--- /dev/null
+++ b/arch/powerpc/include/asm/device.h
@@ -0,0 +1,24 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#ifndef _ASM_POWERPC_DEVICE_H
+#define _ASM_POWERPC_DEVICE_H
+
+struct dma_mapping_ops;
+struct device_node;
+
+struct dev_archdata {
+	/* Optional pointer to an OF device node */
+	struct device_node	*of_node;
+
+	/* DMA operations on that device */
+	struct dma_mapping_ops	*dma_ops;
+	void			*dma_data;
+
+	/* NUMA node if applicable */
+	int			numa_node;
+};
+
+#endif /* _ASM_POWERPC_DEVICE_H */
diff --git a/arch/powerpc/include/asm/div64.h b/arch/powerpc/include/asm/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/arch/powerpc/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..c7ca45f97dd2
--- /dev/null
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -0,0 +1,474 @@
+/*
+ * Copyright (C) 2004 IBM
+ *
+ * Implements the generic device dma API for powerpc.
+ * the pci and vio busses
+ */
+#ifndef _ASM_DMA_MAPPING_H
+#define _ASM_DMA_MAPPING_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/cache.h>
+/* need struct page definitions */
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-attrs.h>
+#include <asm/io.h>
+
+#define DMA_ERROR_CODE		(~(dma_addr_t)0x0)
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+/*
+ * DMA-consistent mapping functions for PowerPCs that don't support
+ * cache snooping.  These allocate/free a region of uncached mapped
+ * memory space for use with DMA devices.  Alternatively, you could
+ * allocate the space "normally" and use the cache management functions
+ * to ensure it is consistent.
+ */
+extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp);
+extern void __dma_free_coherent(size_t size, void *vaddr);
+extern void __dma_sync(void *vaddr, size_t size, int direction);
+extern void __dma_sync_page(struct page *page, unsigned long offset,
+				 size_t size, int direction);
+
+#else /* ! CONFIG_NOT_COHERENT_CACHE */
+/*
+ * Cache coherent cores.
+ */
+
+#define __dma_alloc_coherent(gfp, size, handle)	NULL
+#define __dma_free_coherent(size, addr)		((void)0)
+#define __dma_sync(addr, size, rw)		((void)0)
+#define __dma_sync_page(pg, off, sz, rw)	((void)0)
+
+#endif /* ! CONFIG_NOT_COHERENT_CACHE */
+
+#ifdef CONFIG_PPC64
+
+static inline unsigned long device_to_mask(struct device *dev)
+{
+	if (dev->dma_mask && *dev->dma_mask)
+		return *dev->dma_mask;
+	/* Assume devices without mask can take 32 bit addresses */
+	return 0xfffffffful;
+}
+
+/*
+ * DMA operations are abstracted for G5 vs. i/pSeries, PCI vs. VIO
+ */
+struct dma_mapping_ops {
+	void *		(*alloc_coherent)(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t flag);
+	void		(*free_coherent)(struct device *dev, size_t size,
+				void *vaddr, dma_addr_t dma_handle);
+	dma_addr_t	(*map_single)(struct device *dev, void *ptr,
+				size_t size, enum dma_data_direction direction,
+				struct dma_attrs *attrs);
+	void		(*unmap_single)(struct device *dev, dma_addr_t dma_addr,
+				size_t size, enum dma_data_direction direction,
+				struct dma_attrs *attrs);
+	int		(*map_sg)(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction,
+				struct dma_attrs *attrs);
+	void		(*unmap_sg)(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction,
+				struct dma_attrs *attrs);
+	int		(*dma_supported)(struct device *dev, u64 mask);
+	int		(*set_dma_mask)(struct device *dev, u64 dma_mask);
+};
+
+static inline struct dma_mapping_ops *get_dma_ops(struct device *dev)
+{
+	/* We don't handle the NULL dev case for ISA for now. We could
+	 * do it via an out of line call but it is not needed for now. The
+	 * only ISA DMA device we support is the floppy and we have a hack
+	 * in the floppy driver directly to get a device for us.
+	 */
+	if (unlikely(dev == NULL || dev->archdata.dma_ops == NULL))
+		return NULL;
+	return dev->archdata.dma_ops;
+}
+
+static inline void set_dma_ops(struct device *dev, struct dma_mapping_ops *ops)
+{
+	dev->archdata.dma_ops = ops;
+}
+
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	if (unlikely(dma_ops == NULL))
+		return 0;
+	if (dma_ops->dma_supported == NULL)
+		return 1;
+	return dma_ops->dma_supported(dev, mask);
+}
+
+/* We have our own implementation of pci_set_dma_mask() */
+#define HAVE_ARCH_PCI_SET_DMA_MASK
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	if (unlikely(dma_ops == NULL))
+		return -EIO;
+	if (dma_ops->set_dma_mask != NULL)
+		return dma_ops->set_dma_mask(dev, dma_mask);
+	if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+		return -EIO;
+	*dev->dma_mask = dma_mask;
+	return 0;
+}
+
+static inline dma_addr_t dma_map_single_attrs(struct device *dev,
+					      void *cpu_addr,
+					      size_t size,
+					      enum dma_data_direction direction,
+					      struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->map_single(dev, cpu_addr, size, direction, attrs);
+}
+
+static inline void dma_unmap_single_attrs(struct device *dev,
+					  dma_addr_t dma_addr,
+					  size_t size,
+					  enum dma_data_direction direction,
+					  struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	dma_ops->unmap_single(dev, dma_addr, size, direction, attrs);
+}
+
+static inline dma_addr_t dma_map_page_attrs(struct device *dev,
+					    struct page *page,
+					    unsigned long offset, size_t size,
+					    enum dma_data_direction direction,
+					    struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->map_single(dev, page_address(page) + offset, size,
+			direction, attrs);
+}
+
+static inline void dma_unmap_page_attrs(struct device *dev,
+					dma_addr_t dma_address,
+					size_t size,
+					enum dma_data_direction direction,
+					struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	dma_ops->unmap_single(dev, dma_address, size, direction, attrs);
+}
+
+static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
+				   int nents, enum dma_data_direction direction,
+				   struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->map_sg(dev, sg, nents, direction, attrs);
+}
+
+static inline void dma_unmap_sg_attrs(struct device *dev,
+				      struct scatterlist *sg,
+				      int nhwentries,
+				      enum dma_data_direction direction,
+				      struct dma_attrs *attrs)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	dma_ops->unmap_sg(dev, sg, nhwentries, direction, attrs);
+}
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t flag)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_handle)
+{
+	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+	BUG_ON(!dma_ops);
+	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
+static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+					size_t size,
+					enum dma_data_direction direction)
+{
+	return dma_map_single_attrs(dev, cpu_addr, size, direction, NULL);
+}
+
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+				    size_t size,
+				    enum dma_data_direction direction)
+{
+	dma_unmap_single_attrs(dev, dma_addr, size, direction, NULL);
+}
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction direction)
+{
+	return dma_map_page_attrs(dev, page, offset, size, direction, NULL);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size,
+				  enum dma_data_direction direction)
+{
+	dma_unmap_page_attrs(dev, dma_address, size, direction, NULL);
+}
+
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, enum dma_data_direction direction)
+{
+	return dma_map_sg_attrs(dev, sg, nents, direction, NULL);
+}
+
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nhwentries,
+				enum dma_data_direction direction)
+{
+	dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL);
+}
+
+/*
+ * Available generic sets of operations
+ */
+extern struct dma_mapping_ops dma_iommu_ops;
+extern struct dma_mapping_ops dma_direct_ops;
+
+#else /* CONFIG_PPC64 */
+
+#define dma_supported(dev, mask)	(1)
+
+static inline int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = dma_mask;
+
+	return 0;
+}
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t * dma_handle,
+				       gfp_t gfp)
+{
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	return __dma_alloc_coherent(size, dma_handle, gfp);
+#else
+	void *ret;
+	/* ignore region specifiers */
+	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+	if (dev == NULL || dev->coherent_dma_mask < 0xffffffff)
+		gfp |= GFP_DMA;
+
+	ret = (void *)__get_free_pages(gfp, get_order(size));
+
+	if (ret != NULL) {
+		memset(ret, 0, size);
+		*dma_handle = virt_to_bus(ret);
+	}
+
+	return ret;
+#endif
+}
+
+static inline void
+dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+		  dma_addr_t dma_handle)
+{
+#ifdef CONFIG_NOT_COHERENT_CACHE
+	__dma_free_coherent(size, vaddr);
+#else
+	free_pages((unsigned long)vaddr, get_order(size));
+#endif
+}
+
+static inline dma_addr_t
+dma_map_single(struct device *dev, void *ptr, size_t size,
+	       enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+
+	__dma_sync(ptr, size, direction);
+
+	return virt_to_bus(ptr);
+}
+
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+				    size_t size,
+				    enum dma_data_direction direction)
+{
+	/* We do nothing. */
+}
+
+static inline dma_addr_t
+dma_map_page(struct device *dev, struct page *page,
+	     unsigned long offset, size_t size,
+	     enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+
+	__dma_sync_page(page, offset, size, direction);
+
+	return page_to_bus(page) + offset;
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size,
+				  enum dma_data_direction direction)
+{
+	/* We do nothing. */
+}
+
+static inline int
+dma_map_sg(struct device *dev, struct scatterlist *sgl, int nents,
+	   enum dma_data_direction direction)
+{
+	struct scatterlist *sg;
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	for_each_sg(sgl, sg, nents, i) {
+		BUG_ON(!sg_page(sg));
+		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
+		sg->dma_address = page_to_bus(sg_page(sg)) + sg->offset;
+	}
+
+	return nents;
+}
+
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nhwentries,
+				enum dma_data_direction direction)
+{
+	/* We don't do anything here. */
+}
+
+#endif /* CONFIG_PPC64 */
+
+static inline void dma_sync_single_for_cpu(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	__dma_sync(bus_to_virt(dma_handle), size, direction);
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	__dma_sync(bus_to_virt(dma_handle), size, direction);
+}
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+		struct scatterlist *sgl, int nents,
+		enum dma_data_direction direction)
+{
+	struct scatterlist *sg;
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	for_each_sg(sgl, sg, nents, i)
+		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sgl, int nents,
+		enum dma_data_direction direction)
+{
+	struct scatterlist *sg;
+	int i;
+
+	BUG_ON(direction == DMA_NONE);
+
+	for_each_sg(sgl, sg, nents, i)
+		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+#ifdef CONFIG_PPC64
+	return (dma_addr == DMA_ERROR_CODE);
+#else
+	return 0;
+#endif
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define dma_is_consistent(d, h)	(0)
+#else
+#define dma_is_consistent(d, h)	(1)
+#endif
+
+static inline int dma_get_cache_alignment(void)
+{
+#ifdef CONFIG_PPC64
+	/* no easy way to get cache size on all processors, so return
+	 * the maximum possible, to be safe */
+	return (1 << INTERNODE_CACHE_SHIFT);
+#else
+	/*
+	 * Each processor family will define its own L1_CACHE_SHIFT,
+	 * L1_CACHE_BYTES wraps to this, so this is always safe.
+	 */
+	return L1_CACHE_BYTES;
+#endif
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+		dma_addr_t dma_handle, unsigned long offset, size_t size,
+		enum dma_data_direction direction)
+{
+	/* just sync everything for now */
+	dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+		dma_addr_t dma_handle, unsigned long offset, size_t size,
+		enum dma_data_direction direction)
+{
+	/* just sync everything for now */
+	dma_sync_single_for_device(dev, dma_handle, offset + size, direction);
+}
+
+static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+	__dma_sync(vaddr, size, (int)direction);
+}
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_DMA_MAPPING_H */
diff --git a/arch/powerpc/include/asm/dma.h b/arch/powerpc/include/asm/dma.h
new file mode 100644
index 000000000000..a7e06e25c708
--- /dev/null
+++ b/arch/powerpc/include/asm/dma.h
@@ -0,0 +1,360 @@
+#ifndef _ASM_POWERPC_DMA_H
+#define _ASM_POWERPC_DMA_H
+#ifdef __KERNEL__
+
+/*
+ * Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ * Changes for ppc sound by Christoph Nadig
+ */
+
+/*
+ * Note: Adapted for PowerPC by Gary Thomas
+ * Modified by Cort Dougan <cort@cs.nmt.edu>
+ *
+ * None of this really applies for Power Macintoshes.  There is
+ * basically just enough here to get kernel/dma.c to compile.
+ *
+ * There may be some comments or restrictions made here which are
+ * not valid for the PReP platform.  Take what you read
+ * with a grain of salt.
+ */
+
+#include <asm/io.h>
+#include <linux/spinlock.h>
+#include <asm/system.h>
+
+#ifndef MAX_DMA_CHANNELS
+#define MAX_DMA_CHANNELS	8
+#endif
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+/* Doesn't really apply... */
+#define MAX_DMA_ADDRESS		(~0UL)
+
+#if !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI)
+
+#ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER
+#define dma_outb	outb_p
+#else
+#define dma_outb	outb
+#endif
+
+#define dma_inb		inb
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * On PReP, DMA transfers are limited to the lower 16MB of _physical_ memory.
+ * On CHRP, the W83C553F (and VLSI Tollgate?) support full 32 bit addressing.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation.
+ *
+ */
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE	0x00	/* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE	0xC0	/* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG		0x08	/* command register (w) */
+#define DMA1_STAT_REG		0x08	/* status register (r) */
+#define DMA1_REQ_REG		0x09	/* request register (w) */
+#define DMA1_MASK_REG		0x0A	/* single-channel mask (w) */
+#define DMA1_MODE_REG		0x0B	/* mode register (w) */
+#define DMA1_CLEAR_FF_REG	0x0C	/* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG		0x0D	/* Temporary Register (r) */
+#define DMA1_RESET_REG		0x0D	/* Master Clear (w) */
+#define DMA1_CLR_MASK_REG	0x0E	/* Clear Mask */
+#define DMA1_MASK_ALL_REG	0x0F	/* all-channels mask (w) */
+
+#define DMA2_CMD_REG		0xD0	/* command register (w) */
+#define DMA2_STAT_REG		0xD0	/* status register (r) */
+#define DMA2_REQ_REG		0xD2	/* request register (w) */
+#define DMA2_MASK_REG		0xD4	/* single-channel mask (w) */
+#define DMA2_MODE_REG		0xD6	/* mode register (w) */
+#define DMA2_CLEAR_FF_REG	0xD8	/* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG		0xDA	/* Temporary Register (r) */
+#define DMA2_RESET_REG		0xDA	/* Master Clear (w) */
+#define DMA2_CLR_MASK_REG	0xDC	/* Clear Mask */
+#define DMA2_MASK_ALL_REG	0xDE	/* all-channels mask (w) */
+
+#define DMA_ADDR_0		0x00	/* DMA address registers */
+#define DMA_ADDR_1		0x02
+#define DMA_ADDR_2		0x04
+#define DMA_ADDR_3		0x06
+#define DMA_ADDR_4		0xC0
+#define DMA_ADDR_5		0xC4
+#define DMA_ADDR_6		0xC8
+#define DMA_ADDR_7		0xCC
+
+#define DMA_CNT_0		0x01	/* DMA count registers */
+#define DMA_CNT_1		0x03
+#define DMA_CNT_2		0x05
+#define DMA_CNT_3		0x07
+#define DMA_CNT_4		0xC2
+#define DMA_CNT_5		0xC6
+#define DMA_CNT_6		0xCA
+#define DMA_CNT_7		0xCE
+
+#define DMA_LO_PAGE_0		0x87	/* DMA page registers */
+#define DMA_LO_PAGE_1		0x83
+#define DMA_LO_PAGE_2		0x81
+#define DMA_LO_PAGE_3		0x82
+#define DMA_LO_PAGE_5		0x8B
+#define DMA_LO_PAGE_6		0x89
+#define DMA_LO_PAGE_7		0x8A
+
+#define DMA_HI_PAGE_0		0x487	/* DMA page registers */
+#define DMA_HI_PAGE_1		0x483
+#define DMA_HI_PAGE_2		0x481
+#define DMA_HI_PAGE_3		0x482
+#define DMA_HI_PAGE_5		0x48B
+#define DMA_HI_PAGE_6		0x489
+#define DMA_HI_PAGE_7		0x48A
+
+#define DMA1_EXT_REG		0x40B
+#define DMA2_EXT_REG		0x4D6
+
+#ifndef __powerpc64__
+    /* in arch/ppc/kernel/setup.c -- Cort */
+    extern unsigned int DMA_MODE_WRITE;
+    extern unsigned int DMA_MODE_READ;
+    extern unsigned long ISA_DMA_THRESHOLD;
+#else
+    #define DMA_MODE_READ	0x44	/* I/O to memory, no autoinit, increment, single mode */
+    #define DMA_MODE_WRITE	0x48	/* memory to I/O, no autoinit, increment, single mode */
+#endif
+
+#define DMA_MODE_CASCADE	0xC0	/* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT		0x10
+
+extern spinlock_t dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+	unsigned char ucDmaCmd = 0x00;
+
+	if (dmanr != 4) {
+		dma_outb(0, DMA2_MASK_REG);	/* This may not be enabled */
+		dma_outb(ucDmaCmd, DMA2_CMD_REG);	/* Enable group */
+	}
+	if (dmanr <= 3) {
+		dma_outb(dmanr, DMA1_MASK_REG);
+		dma_outb(ucDmaCmd, DMA1_CMD_REG);	/* Enable group */
+	} else {
+		dma_outb(dmanr & 3, DMA2_MASK_REG);
+	}
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+	if (dmanr <= 3)
+		dma_outb(dmanr | 4, DMA1_MASK_REG);
+	else
+		dma_outb((dmanr & 3) | 4, DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+	if (dmanr <= 3)
+		dma_outb(0, DMA1_CLEAR_FF_REG);
+	else
+		dma_outb(0, DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+	if (dmanr <= 3)
+		dma_outb(mode | dmanr, DMA1_MODE_REG);
+	else
+		dma_outb(mode | (dmanr & 3), DMA2_MODE_REG);
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static __inline__ void set_dma_page(unsigned int dmanr, int pagenr)
+{
+	switch (dmanr) {
+	case 0:
+		dma_outb(pagenr, DMA_LO_PAGE_0);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_0);
+		break;
+	case 1:
+		dma_outb(pagenr, DMA_LO_PAGE_1);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_1);
+		break;
+	case 2:
+		dma_outb(pagenr, DMA_LO_PAGE_2);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_2);
+		break;
+	case 3:
+		dma_outb(pagenr, DMA_LO_PAGE_3);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_3);
+		break;
+	case 5:
+		dma_outb(pagenr & 0xfe, DMA_LO_PAGE_5);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_5);
+		break;
+	case 6:
+		dma_outb(pagenr & 0xfe, DMA_LO_PAGE_6);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_6);
+		break;
+	case 7:
+		dma_outb(pagenr & 0xfe, DMA_LO_PAGE_7);
+		dma_outb(pagenr >> 8, DMA_HI_PAGE_7);
+		break;
+	}
+}
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int phys)
+{
+	if (dmanr <= 3) {
+		dma_outb(phys & 0xff,
+			 ((dmanr & 3) << 1) + IO_DMA1_BASE);
+		dma_outb((phys >> 8) & 0xff,
+			 ((dmanr & 3) << 1) + IO_DMA1_BASE);
+	} else {
+		dma_outb((phys >> 1) & 0xff,
+			 ((dmanr & 3) << 2) + IO_DMA2_BASE);
+		dma_outb((phys >> 9) & 0xff,
+			 ((dmanr & 3) << 2) + IO_DMA2_BASE);
+	}
+	set_dma_page(dmanr, phys >> 16);
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	count--;
+	if (dmanr <= 3) {
+		dma_outb(count & 0xff,
+			 ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
+		dma_outb((count >> 8) & 0xff,
+			 ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE);
+	} else {
+		dma_outb((count >> 1) & 0xff,
+			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+		dma_outb((count >> 9) & 0xff,
+			 ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE);
+	}
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+	unsigned int io_port = (dmanr <= 3)
+	    ? ((dmanr & 3) << 1) + 1 + IO_DMA1_BASE
+	    : ((dmanr & 3) << 2) + 2 + IO_DMA2_BASE;
+
+	/* using short to get 16-bit wrap around */
+	unsigned short count;
+
+	count = 1 + dma_inb(io_port);
+	count += dma_inb(io_port) << 8;
+
+	return (dmanr <= 3) ? count : (count << 1);
+}
+
+/* These are in kernel/dma.c: */
+
+/* reserve a DMA channel */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+/* release it again */
+extern void free_dma(unsigned int dmanr);
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+#endif	/* !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) */
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_DMA_H */
diff --git a/arch/powerpc/include/asm/edac.h b/arch/powerpc/include/asm/edac.h
new file mode 100644
index 000000000000..6ead88bbfbb8
--- /dev/null
+++ b/arch/powerpc/include/asm/edac.h
@@ -0,0 +1,40 @@
+/*
+ * PPC EDAC common defs
+ *
+ * Author: Dave Jiang <djiang@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef ASM_EDAC_H
+#define ASM_EDAC_H
+/*
+ * ECC atomic, DMA, SMP and interrupt safe scrub function.
+ * Implements the per arch atomic_scrub() that EDAC use for software
+ * ECC scrubbing.  It reads memory and then writes back the original
+ * value, allowing the hardware to detect and correct memory errors.
+ */
+static __inline__ void atomic_scrub(void *va, u32 size)
+{
+	unsigned int *virt_addr = va;
+	unsigned int temp;
+	unsigned int i;
+
+	for (i = 0; i < size / sizeof(*virt_addr); i++, virt_addr++) {
+		/* Very carefully read and write to memory atomically
+		 * so we are interrupt, DMA and SMP safe.
+		 */
+		__asm__ __volatile__ ("\n\
+				1:	lwarx	%0,0,%1\n\
+					stwcx.	%0,0,%1\n\
+					bne-	1b\n\
+					isync"
+					: "=&r"(temp)
+					: "r"(virt_addr)
+					: "cr0", "memory");
+	}
+}
+
+#endif
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
new file mode 100644
index 000000000000..b886bec67016
--- /dev/null
+++ b/arch/powerpc/include/asm/eeh.h
@@ -0,0 +1,211 @@
+/*
+ * eeh.h
+ * Copyright (C) 2001  Dave Engebretsen & Todd Inglett IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _PPC64_EEH_H
+#define _PPC64_EEH_H
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/string.h>
+
+struct pci_dev;
+struct pci_bus;
+struct device_node;
+
+#ifdef CONFIG_EEH
+
+extern int eeh_subsystem_enabled;
+
+/* Values for eeh_mode bits in device_node */
+#define EEH_MODE_SUPPORTED     (1<<0)
+#define EEH_MODE_NOCHECK       (1<<1)
+#define EEH_MODE_ISOLATED      (1<<2)
+#define EEH_MODE_RECOVERING    (1<<3)
+#define EEH_MODE_IRQ_DISABLED  (1<<4)
+
+/* Max number of EEH freezes allowed before we consider the device
+ * to be permanently disabled. */
+#define EEH_MAX_ALLOWED_FREEZES 5
+
+void __init eeh_init(void);
+unsigned long eeh_check_failure(const volatile void __iomem *token,
+				unsigned long val);
+int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev);
+void __init pci_addr_cache_build(void);
+
+/**
+ * eeh_add_device_early
+ * eeh_add_device_late
+ *
+ * Perform eeh initialization for devices added after boot.
+ * Call eeh_add_device_early before doing any i/o to the
+ * device (including config space i/o).  Call eeh_add_device_late
+ * to finish the eeh setup for this device.
+ */
+void eeh_add_device_tree_early(struct device_node *);
+void eeh_add_device_tree_late(struct pci_bus *);
+
+/**
+ * eeh_remove_device_recursive - undo EEH for device & children.
+ * @dev: pci device to be removed
+ *
+ * As above, this removes the device; it also removes child
+ * pci devices as well.
+ */
+void eeh_remove_bus_device(struct pci_dev *);
+
+/**
+ * EEH_POSSIBLE_ERROR() -- test for possible MMIO failure.
+ *
+ * If this macro yields TRUE, the caller relays to eeh_check_failure()
+ * which does further tests out of line.
+ */
+#define EEH_POSSIBLE_ERROR(val, type)	((val) == (type)~0 && eeh_subsystem_enabled)
+
+/*
+ * Reads from a device which has been isolated by EEH will return
+ * all 1s.  This macro gives an all-1s value of the given size (in
+ * bytes: 1, 2, or 4) for comparing with the result of a read.
+ */
+#define EEH_IO_ERROR_VALUE(size)	(~0U >> ((4 - (size)) * 8))
+
+#else /* !CONFIG_EEH */
+static inline void eeh_init(void) { }
+
+static inline unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val)
+{
+	return val;
+}
+
+static inline int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
+{
+	return 0;
+}
+
+static inline void pci_addr_cache_build(void) { }
+
+static inline void eeh_add_device_tree_early(struct device_node *dn) { }
+
+static inline void eeh_add_device_tree_late(struct pci_bus *bus) { }
+
+static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
+#define EEH_POSSIBLE_ERROR(val, type) (0)
+#define EEH_IO_ERROR_VALUE(size) (-1UL)
+#endif /* CONFIG_EEH */
+
+/*
+ * MMIO read/write operations with EEH support.
+ */
+static inline u8 eeh_readb(const volatile void __iomem *addr)
+{
+	u8 val = in_8(addr);
+	if (EEH_POSSIBLE_ERROR(val, u8))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u16 eeh_readw(const volatile void __iomem *addr)
+{
+	u16 val = in_le16(addr);
+	if (EEH_POSSIBLE_ERROR(val, u16))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u32 eeh_readl(const volatile void __iomem *addr)
+{
+	u32 val = in_le32(addr);
+	if (EEH_POSSIBLE_ERROR(val, u32))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u64 eeh_readq(const volatile void __iomem *addr)
+{
+	u64 val = in_le64(addr);
+	if (EEH_POSSIBLE_ERROR(val, u64))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u16 eeh_readw_be(const volatile void __iomem *addr)
+{
+	u16 val = in_be16(addr);
+	if (EEH_POSSIBLE_ERROR(val, u16))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u32 eeh_readl_be(const volatile void __iomem *addr)
+{
+	u32 val = in_be32(addr);
+	if (EEH_POSSIBLE_ERROR(val, u32))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline u64 eeh_readq_be(const volatile void __iomem *addr)
+{
+	u64 val = in_be64(addr);
+	if (EEH_POSSIBLE_ERROR(val, u64))
+		return eeh_check_failure(addr, val);
+	return val;
+}
+
+static inline void eeh_memcpy_fromio(void *dest, const
+				     volatile void __iomem *src,
+				     unsigned long n)
+{
+	_memcpy_fromio(dest, src, n);
+
+	/* Look for ffff's here at dest[n].  Assume that at least 4 bytes
+	 * were copied. Check all four bytes.
+	 */
+	if (n >= 4 && EEH_POSSIBLE_ERROR(*((u32 *)(dest + n - 4)), u32))
+		eeh_check_failure(src, *((u32 *)(dest + n - 4)));
+}
+
+/* in-string eeh macros */
+static inline void eeh_readsb(const volatile void __iomem *addr, void * buf,
+			      int ns)
+{
+	_insb(addr, buf, ns);
+	if (EEH_POSSIBLE_ERROR((*(((u8*)buf)+ns-1)), u8))
+		eeh_check_failure(addr, *(u8*)buf);
+}
+
+static inline void eeh_readsw(const volatile void __iomem *addr, void * buf,
+			      int ns)
+{
+	_insw(addr, buf, ns);
+	if (EEH_POSSIBLE_ERROR((*(((u16*)buf)+ns-1)), u16))
+		eeh_check_failure(addr, *(u16*)buf);
+}
+
+static inline void eeh_readsl(const volatile void __iomem *addr, void * buf,
+			      int nl)
+{
+	_insl(addr, buf, nl);
+	if (EEH_POSSIBLE_ERROR((*(((u32*)buf)+nl-1)), u32))
+		eeh_check_failure(addr, *(u32*)buf);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _PPC64_EEH_H */
diff --git a/arch/powerpc/include/asm/eeh_event.h b/arch/powerpc/include/asm/eeh_event.h
new file mode 100644
index 000000000000..cc3cb04539ac
--- /dev/null
+++ b/arch/powerpc/include/asm/eeh_event.h
@@ -0,0 +1,53 @@
+/*
+ *	eeh_event.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * Copyright (c) 2005 Linas Vepstas <linas@linas.org>
+ */
+
+#ifndef ASM_POWERPC_EEH_EVENT_H
+#define ASM_POWERPC_EEH_EVENT_H
+#ifdef __KERNEL__
+
+/** EEH event -- structure holding pci controller data that describes
+ *  a change in the isolation status of a PCI slot.  A pointer
+ *  to this struct is passed as the data pointer in a notify callback.
+ */
+struct eeh_event {
+	struct list_head     list;
+	struct device_node 	*dn;   /* struct device node */
+	struct pci_dev       *dev;  /* affected device */
+};
+
+/**
+ * eeh_send_failure_event - generate a PCI error event
+ * @dev pci device
+ *
+ * This routine builds a PCI error event which will be delivered
+ * to all listeners on the eeh_notifier_chain.
+ *
+ * This routine can be called within an interrupt context;
+ * the actual event will be delivered in a normal context
+ * (from a workqueue).
+ */
+int eeh_send_failure_event (struct device_node *dn,
+                            struct pci_dev *dev);
+
+/* Main recovery function */
+struct pci_dn * handle_eeh_events (struct eeh_event *);
+
+#endif /* __KERNEL__ */
+#endif /* ASM_POWERPC_EEH_EVENT_H */
diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
new file mode 100644
index 000000000000..80d1f399ee51
--- /dev/null
+++ b/arch/powerpc/include/asm/elf.h
@@ -0,0 +1,424 @@
+#ifndef _ASM_POWERPC_ELF_H
+#define _ASM_POWERPC_ELF_H
+
+#ifdef __KERNEL__
+#include <linux/sched.h>	/* for task_struct */
+#include <asm/page.h>
+#include <asm/string.h>
+#endif
+
+#include <asm/types.h>
+#include <asm/ptrace.h>
+#include <asm/cputable.h>
+#include <asm/auxvec.h>
+
+/* PowerPC relocations defined by the ABIs */
+#define R_PPC_NONE		0
+#define R_PPC_ADDR32		1	/* 32bit absolute address */
+#define R_PPC_ADDR24		2	/* 26bit address, 2 bits ignored.  */
+#define R_PPC_ADDR16		3	/* 16bit absolute address */
+#define R_PPC_ADDR16_LO		4	/* lower 16bit of absolute address */
+#define R_PPC_ADDR16_HI		5	/* high 16bit of absolute address */
+#define R_PPC_ADDR16_HA		6	/* adjusted high 16bit */
+#define R_PPC_ADDR14		7	/* 16bit address, 2 bits ignored */
+#define R_PPC_ADDR14_BRTAKEN	8
+#define R_PPC_ADDR14_BRNTAKEN	9
+#define R_PPC_REL24		10	/* PC relative 26 bit */
+#define R_PPC_REL14		11	/* PC relative 16 bit */
+#define R_PPC_REL14_BRTAKEN	12
+#define R_PPC_REL14_BRNTAKEN	13
+#define R_PPC_GOT16		14
+#define R_PPC_GOT16_LO		15
+#define R_PPC_GOT16_HI		16
+#define R_PPC_GOT16_HA		17
+#define R_PPC_PLTREL24		18
+#define R_PPC_COPY		19
+#define R_PPC_GLOB_DAT		20
+#define R_PPC_JMP_SLOT		21
+#define R_PPC_RELATIVE		22
+#define R_PPC_LOCAL24PC		23
+#define R_PPC_UADDR32		24
+#define R_PPC_UADDR16		25
+#define R_PPC_REL32		26
+#define R_PPC_PLT32		27
+#define R_PPC_PLTREL32		28
+#define R_PPC_PLT16_LO		29
+#define R_PPC_PLT16_HI		30
+#define R_PPC_PLT16_HA		31
+#define R_PPC_SDAREL16		32
+#define R_PPC_SECTOFF		33
+#define R_PPC_SECTOFF_LO	34
+#define R_PPC_SECTOFF_HI	35
+#define R_PPC_SECTOFF_HA	36
+
+/* PowerPC relocations defined for the TLS access ABI.  */
+#define R_PPC_TLS		67 /* none	(sym+add)@tls */
+#define R_PPC_DTPMOD32		68 /* word32	(sym+add)@dtpmod */
+#define R_PPC_TPREL16		69 /* half16*	(sym+add)@tprel */
+#define R_PPC_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
+#define R_PPC_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
+#define R_PPC_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
+#define R_PPC_TPREL32		73 /* word32	(sym+add)@tprel */
+#define R_PPC_DTPREL16		74 /* half16*	(sym+add)@dtprel */
+#define R_PPC_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
+#define R_PPC_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
+#define R_PPC_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
+#define R_PPC_DTPREL32		78 /* word32	(sym+add)@dtprel */
+#define R_PPC_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
+#define R_PPC_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
+#define R_PPC_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
+#define R_PPC_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
+#define R_PPC_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
+#define R_PPC_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
+#define R_PPC_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
+#define R_PPC_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
+#define R_PPC_GOT_TPREL16	87 /* half16*	(sym+add)@got@tprel */
+#define R_PPC_GOT_TPREL16_LO	88 /* half16	(sym+add)@got@tprel@l */
+#define R_PPC_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
+#define R_PPC_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
+#define R_PPC_GOT_DTPREL16	91 /* half16*	(sym+add)@got@dtprel */
+#define R_PPC_GOT_DTPREL16_LO	92 /* half16*	(sym+add)@got@dtprel@l */
+#define R_PPC_GOT_DTPREL16_HI	93 /* half16*	(sym+add)@got@dtprel@h */
+#define R_PPC_GOT_DTPREL16_HA	94 /* half16*	(sym+add)@got@dtprel@ha */
+
+/* keep this the last entry. */
+#define R_PPC_NUM		95
+
+/*
+ * ELF register definitions..
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define ELF_NGREG	48	/* includes nip, msr, lr, etc. */
+#define ELF_NFPREG	33	/* includes fpscr */
+
+typedef unsigned long elf_greg_t64;
+typedef elf_greg_t64 elf_gregset_t64[ELF_NGREG];
+
+typedef unsigned int elf_greg_t32;
+typedef elf_greg_t32 elf_gregset_t32[ELF_NGREG];
+typedef elf_gregset_t32 compat_elf_gregset_t;
+
+/*
+ * ELF_ARCH, CLASS, and DATA are used to set parameters in the core dumps.
+ */
+#ifdef __powerpc64__
+# define ELF_NVRREG32	33	/* includes vscr & vrsave stuffed together */
+# define ELF_NVRREG	34	/* includes vscr & vrsave in split vectors */
+# define ELF_NVSRHALFREG 32	/* Half the vsx registers */
+# define ELF_GREG_TYPE	elf_greg_t64
+#else
+# define ELF_NEVRREG	34	/* includes acc (as 2) */
+# define ELF_NVRREG	33	/* includes vscr */
+# define ELF_GREG_TYPE	elf_greg_t32
+# define ELF_ARCH	EM_PPC
+# define ELF_CLASS	ELFCLASS32
+# define ELF_DATA	ELFDATA2MSB
+#endif /* __powerpc64__ */
+
+#ifndef ELF_ARCH
+# define ELF_ARCH	EM_PPC64
+# define ELF_CLASS	ELFCLASS64
+# define ELF_DATA	ELFDATA2MSB
+  typedef elf_greg_t64 elf_greg_t;
+  typedef elf_gregset_t64 elf_gregset_t;
+#else
+  /* Assumption: ELF_ARCH == EM_PPC and ELF_CLASS == ELFCLASS32 */
+  typedef elf_greg_t32 elf_greg_t;
+  typedef elf_gregset_t32 elf_gregset_t;
+#endif /* ELF_ARCH */
+
+/* Floating point registers */
+typedef double elf_fpreg_t;
+typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
+
+/* Altivec registers */
+/*
+ * The entries with indexes 0-31 contain the corresponding vector registers. 
+ * The entry with index 32 contains the vscr as the last word (offset 12) 
+ * within the quadword.  This allows the vscr to be stored as either a 
+ * quadword (since it must be copied via a vector register to/from storage) 
+ * or as a word.  
+ *
+ * 64-bit kernel notes: The entry at index 33 contains the vrsave as the first  
+ * word (offset 0) within the quadword.
+ *
+ * This definition of the VMX state is compatible with the current PPC32 
+ * ptrace interface.  This allows signal handling and ptrace to use the same 
+ * structures.  This also simplifies the implementation of a bi-arch 
+ * (combined (32- and 64-bit) gdb.
+ *
+ * Note that it's _not_ compatible with 32 bits ucontext which stuffs the
+ * vrsave along with vscr and so only uses 33 vectors for the register set
+ */
+typedef __vector128 elf_vrreg_t;
+typedef elf_vrreg_t elf_vrregset_t[ELF_NVRREG];
+#ifdef __powerpc64__
+typedef elf_vrreg_t elf_vrregset_t32[ELF_NVRREG32];
+typedef elf_fpreg_t elf_vsrreghalf_t32[ELF_NVSRHALFREG];
+#endif
+
+#ifdef __KERNEL__
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == ELF_ARCH)
+#define compat_elf_check_arch(x)	((x)->e_machine == EM_PPC)
+
+#define USE_ELF_CORE_DUMP
+#define CORE_DUMP_USE_REGSET
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (0x20000000)
+
+/*
+ * Our registers are always unsigned longs, whether we're a 32 bit
+ * process or 64 bit, on either a 64 bit or 32 bit kernel.
+ *
+ * This macro relies on elf_regs[i] having the right type to truncate to,
+ * either u32 or u64.  It defines the body of the elf_core_copy_regs
+ * function, either the native one with elf_gregset_t elf_regs or
+ * the 32-bit one with elf_gregset_t32 elf_regs.
+ */
+#define PPC_ELF_CORE_COPY_REGS(elf_regs, regs) \
+	int i, nregs = min(sizeof(*regs) / sizeof(unsigned long), \
+			   (size_t)ELF_NGREG);			  \
+	for (i = 0; i < nregs; i++) \
+		elf_regs[i] = ((unsigned long *) regs)[i]; \
+	memset(&elf_regs[i], 0, (ELF_NGREG - i) * sizeof(elf_regs[0]))
+
+/* Common routine for both 32-bit and 64-bit native processes */
+static inline void ppc_elf_core_copy_regs(elf_gregset_t elf_regs,
+					  struct pt_regs *regs)
+{
+	PPC_ELF_CORE_COPY_REGS(elf_regs, regs);
+}
+#define ELF_CORE_COPY_REGS(gregs, regs) ppc_elf_core_copy_regs(gregs, regs);
+
+typedef elf_vrregset_t elf_fpxregset_t;
+
+/* ELF_HWCAP yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This could be done in userspace,
+   but it's not easy, and we've already done it here.  */
+# define ELF_HWCAP	(cur_cpu_spec->cpu_user_features)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM	(cur_cpu_spec->platform)
+
+/* While ELF_PLATFORM indicates the ISA supported by the platform, it
+ * may not accurately reflect the underlying behavior of the hardware
+ * (as in the case of running in Power5+ compatibility mode on a
+ * Power6 machine).  ELF_BASE_PLATFORM allows ld.so to load libraries
+ * that are tuned for the real hardware.
+ */
+#define ELF_BASE_PLATFORM (powerpc_base_platform)
+
+#ifdef __powerpc64__
+# define ELF_PLAT_INIT(_r, load_addr)	do {	\
+	_r->gpr[2] = load_addr; 		\
+} while (0)
+#endif /* __powerpc64__ */
+
+#ifdef __powerpc64__
+# define SET_PERSONALITY(ex, ibcs2)				\
+do {								\
+	unsigned long new_flags = 0;				\
+	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)		\
+		new_flags = _TIF_32BIT;				\
+	if ((current_thread_info()->flags & _TIF_32BIT)		\
+	    != new_flags)					\
+		set_thread_flag(TIF_ABI_PENDING);		\
+	else							\
+		clear_thread_flag(TIF_ABI_PENDING);		\
+	if (personality(current->personality) != PER_LINUX32)	\
+		set_personality(PER_LINUX |			\
+			(current->personality & (~PER_MASK)));	\
+} while (0)
+/*
+ * An executable for which elf_read_implies_exec() returns TRUE will
+ * have the READ_IMPLIES_EXEC personality flag set automatically. This
+ * is only required to work around bugs in old 32bit toolchains. Since
+ * the 64bit ABI has never had these issues dont enable the workaround
+ * even if we have an executable stack.
+ */
+# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
+		(exec_stk != EXSTACK_DISABLE_X) : 0)
+#else 
+# define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#endif /* __powerpc64__ */
+
+extern int dcache_bsize;
+extern int icache_bsize;
+extern int ucache_bsize;
+
+/* vDSO has arch_setup_additional_pages */
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+				       int executable_stack);
+#define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b);
+
+#endif /* __KERNEL__ */
+
+/*
+ * The requirements here are:
+ * - keep the final alignment of sp (sp & 0xf)
+ * - make sure the 32-bit value at the first 16 byte aligned position of
+ *   AUXV is greater than 16 for glibc compatibility.
+ *   AT_IGNOREPPC is used for that.
+ * - for compatibility with glibc ARCH_DLINFO must always be defined on PPC,
+ *   even if DLINFO_ARCH_ITEMS goes to zero or is undefined.
+ * update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes
+ */
+#define ARCH_DLINFO							\
+do {									\
+	/* Handle glibc compatibility. */				\
+	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
+	NEW_AUX_ENT(AT_IGNOREPPC, AT_IGNOREPPC);			\
+	/* Cache size items */						\
+	NEW_AUX_ENT(AT_DCACHEBSIZE, dcache_bsize);			\
+	NEW_AUX_ENT(AT_ICACHEBSIZE, icache_bsize);			\
+	NEW_AUX_ENT(AT_UCACHEBSIZE, ucache_bsize);			\
+	VDSO_AUX_ENT(AT_SYSINFO_EHDR, current->mm->context.vdso_base)	\
+} while (0)
+
+/* PowerPC64 relocations defined by the ABIs */
+#define R_PPC64_NONE    R_PPC_NONE
+#define R_PPC64_ADDR32  R_PPC_ADDR32  /* 32bit absolute address.  */
+#define R_PPC64_ADDR24  R_PPC_ADDR24  /* 26bit address, word aligned.  */
+#define R_PPC64_ADDR16  R_PPC_ADDR16  /* 16bit absolute address. */
+#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of abs. address.  */
+#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of abs. address. */
+#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits.  */
+#define R_PPC64_ADDR14 R_PPC_ADDR14   /* 16bit address, word aligned.  */
+#define R_PPC64_ADDR14_BRTAKEN  R_PPC_ADDR14_BRTAKEN
+#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN
+#define R_PPC64_REL24   R_PPC_REL24 /* PC relative 26 bit, word aligned.  */
+#define R_PPC64_REL14   R_PPC_REL14 /* PC relative 16 bit. */
+#define R_PPC64_REL14_BRTAKEN   R_PPC_REL14_BRTAKEN
+#define R_PPC64_REL14_BRNTAKEN  R_PPC_REL14_BRNTAKEN
+#define R_PPC64_GOT16     R_PPC_GOT16
+#define R_PPC64_GOT16_LO  R_PPC_GOT16_LO
+#define R_PPC64_GOT16_HI  R_PPC_GOT16_HI
+#define R_PPC64_GOT16_HA  R_PPC_GOT16_HA
+
+#define R_PPC64_COPY      R_PPC_COPY
+#define R_PPC64_GLOB_DAT  R_PPC_GLOB_DAT
+#define R_PPC64_JMP_SLOT  R_PPC_JMP_SLOT
+#define R_PPC64_RELATIVE  R_PPC_RELATIVE
+
+#define R_PPC64_UADDR32   R_PPC_UADDR32
+#define R_PPC64_UADDR16   R_PPC_UADDR16
+#define R_PPC64_REL32     R_PPC_REL32
+#define R_PPC64_PLT32     R_PPC_PLT32
+#define R_PPC64_PLTREL32  R_PPC_PLTREL32
+#define R_PPC64_PLT16_LO  R_PPC_PLT16_LO
+#define R_PPC64_PLT16_HI  R_PPC_PLT16_HI
+#define R_PPC64_PLT16_HA  R_PPC_PLT16_HA
+
+#define R_PPC64_SECTOFF     R_PPC_SECTOFF
+#define R_PPC64_SECTOFF_LO  R_PPC_SECTOFF_LO
+#define R_PPC64_SECTOFF_HI  R_PPC_SECTOFF_HI
+#define R_PPC64_SECTOFF_HA  R_PPC_SECTOFF_HA
+#define R_PPC64_ADDR30          37  /* word30 (S + A - P) >> 2.  */
+#define R_PPC64_ADDR64          38  /* doubleword64 S + A.  */
+#define R_PPC64_ADDR16_HIGHER   39  /* half16 #higher(S + A).  */
+#define R_PPC64_ADDR16_HIGHERA  40  /* half16 #highera(S + A).  */
+#define R_PPC64_ADDR16_HIGHEST  41  /* half16 #highest(S + A).  */
+#define R_PPC64_ADDR16_HIGHESTA 42  /* half16 #highesta(S + A). */
+#define R_PPC64_UADDR64     43  /* doubleword64 S + A.  */
+#define R_PPC64_REL64       44  /* doubleword64 S + A - P.  */
+#define R_PPC64_PLT64       45  /* doubleword64 L + A.  */
+#define R_PPC64_PLTREL64    46  /* doubleword64 L + A - P.  */
+#define R_PPC64_TOC16       47  /* half16* S + A - .TOC.  */
+#define R_PPC64_TOC16_LO    48  /* half16 #lo(S + A - .TOC.).  */
+#define R_PPC64_TOC16_HI    49  /* half16 #hi(S + A - .TOC.).  */
+#define R_PPC64_TOC16_HA    50  /* half16 #ha(S + A - .TOC.).  */
+#define R_PPC64_TOC         51  /* doubleword64 .TOC. */
+#define R_PPC64_PLTGOT16    52  /* half16* M + A.  */
+#define R_PPC64_PLTGOT16_LO 53  /* half16 #lo(M + A).  */
+#define R_PPC64_PLTGOT16_HI 54  /* half16 #hi(M + A).  */
+#define R_PPC64_PLTGOT16_HA 55  /* half16 #ha(M + A).  */
+
+#define R_PPC64_ADDR16_DS      56 /* half16ds* (S + A) >> 2.  */
+#define R_PPC64_ADDR16_LO_DS   57 /* half16ds  #lo(S + A) >> 2.  */
+#define R_PPC64_GOT16_DS       58 /* half16ds* (G + A) >> 2.  */
+#define R_PPC64_GOT16_LO_DS    59 /* half16ds  #lo(G + A) >> 2.  */
+#define R_PPC64_PLT16_LO_DS    60 /* half16ds  #lo(L + A) >> 2.  */
+#define R_PPC64_SECTOFF_DS     61 /* half16ds* (R + A) >> 2.  */
+#define R_PPC64_SECTOFF_LO_DS  62 /* half16ds  #lo(R + A) >> 2.  */
+#define R_PPC64_TOC16_DS       63 /* half16ds* (S + A - .TOC.) >> 2.  */
+#define R_PPC64_TOC16_LO_DS    64 /* half16ds  #lo(S + A - .TOC.) >> 2.  */
+#define R_PPC64_PLTGOT16_DS    65 /* half16ds* (M + A) >> 2.  */
+#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds  #lo(M + A) >> 2.  */
+
+/* PowerPC64 relocations defined for the TLS access ABI.  */
+#define R_PPC64_TLS		67 /* none	(sym+add)@tls */
+#define R_PPC64_DTPMOD64	68 /* doubleword64 (sym+add)@dtpmod */
+#define R_PPC64_TPREL16		69 /* half16*	(sym+add)@tprel */
+#define R_PPC64_TPREL16_LO	70 /* half16	(sym+add)@tprel@l */
+#define R_PPC64_TPREL16_HI	71 /* half16	(sym+add)@tprel@h */
+#define R_PPC64_TPREL16_HA	72 /* half16	(sym+add)@tprel@ha */
+#define R_PPC64_TPREL64		73 /* doubleword64 (sym+add)@tprel */
+#define R_PPC64_DTPREL16	74 /* half16*	(sym+add)@dtprel */
+#define R_PPC64_DTPREL16_LO	75 /* half16	(sym+add)@dtprel@l */
+#define R_PPC64_DTPREL16_HI	76 /* half16	(sym+add)@dtprel@h */
+#define R_PPC64_DTPREL16_HA	77 /* half16	(sym+add)@dtprel@ha */
+#define R_PPC64_DTPREL64	78 /* doubleword64 (sym+add)@dtprel */
+#define R_PPC64_GOT_TLSGD16	79 /* half16*	(sym+add)@got@tlsgd */
+#define R_PPC64_GOT_TLSGD16_LO	80 /* half16	(sym+add)@got@tlsgd@l */
+#define R_PPC64_GOT_TLSGD16_HI	81 /* half16	(sym+add)@got@tlsgd@h */
+#define R_PPC64_GOT_TLSGD16_HA	82 /* half16	(sym+add)@got@tlsgd@ha */
+#define R_PPC64_GOT_TLSLD16	83 /* half16*	(sym+add)@got@tlsld */
+#define R_PPC64_GOT_TLSLD16_LO	84 /* half16	(sym+add)@got@tlsld@l */
+#define R_PPC64_GOT_TLSLD16_HI	85 /* half16	(sym+add)@got@tlsld@h */
+#define R_PPC64_GOT_TLSLD16_HA	86 /* half16	(sym+add)@got@tlsld@ha */
+#define R_PPC64_GOT_TPREL16_DS	87 /* half16ds*	(sym+add)@got@tprel */
+#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
+#define R_PPC64_GOT_TPREL16_HI	89 /* half16	(sym+add)@got@tprel@h */
+#define R_PPC64_GOT_TPREL16_HA	90 /* half16	(sym+add)@got@tprel@ha */
+#define R_PPC64_GOT_DTPREL16_DS	91 /* half16ds*	(sym+add)@got@dtprel */
+#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
+#define R_PPC64_GOT_DTPREL16_HI	93 /* half16	(sym+add)@got@dtprel@h */
+#define R_PPC64_GOT_DTPREL16_HA	94 /* half16	(sym+add)@got@dtprel@ha */
+#define R_PPC64_TPREL16_DS	95 /* half16ds*	(sym+add)@tprel */
+#define R_PPC64_TPREL16_LO_DS	96 /* half16ds	(sym+add)@tprel@l */
+#define R_PPC64_TPREL16_HIGHER	97 /* half16	(sym+add)@tprel@higher */
+#define R_PPC64_TPREL16_HIGHERA	98 /* half16	(sym+add)@tprel@highera */
+#define R_PPC64_TPREL16_HIGHEST	99 /* half16	(sym+add)@tprel@highest */
+#define R_PPC64_TPREL16_HIGHESTA 100 /* half16	(sym+add)@tprel@highesta */
+#define R_PPC64_DTPREL16_DS	101 /* half16ds* (sym+add)@dtprel */
+#define R_PPC64_DTPREL16_LO_DS	102 /* half16ds	(sym+add)@dtprel@l */
+#define R_PPC64_DTPREL16_HIGHER	103 /* half16	(sym+add)@dtprel@higher */
+#define R_PPC64_DTPREL16_HIGHERA 104 /* half16	(sym+add)@dtprel@highera */
+#define R_PPC64_DTPREL16_HIGHEST 105 /* half16	(sym+add)@dtprel@highest */
+#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16	(sym+add)@dtprel@highesta */
+
+/* Keep this the last entry.  */
+#define R_PPC64_NUM		107
+
+#ifdef  __KERNEL__
+
+#ifdef CONFIG_SPU_BASE
+/* Notes used in ET_CORE. Note name is "SPU/<fd>/<filename>". */
+#define NT_SPU		1
+
+#define ARCH_HAVE_EXTRA_ELF_NOTES
+
+#endif /* CONFIG_SPU_BASE */
+
+#endif /* __KERNEL */
+
+#endif /* _ASM_POWERPC_ELF_H */
diff --git a/arch/powerpc/include/asm/emergency-restart.h b/arch/powerpc/include/asm/emergency-restart.h
new file mode 100644
index 000000000000..3711bd9d50bd
--- /dev/null
+++ b/arch/powerpc/include/asm/emergency-restart.h
@@ -0,0 +1 @@
+#include <asm-generic/emergency-restart.h>
diff --git a/arch/powerpc/include/asm/errno.h b/arch/powerpc/include/asm/errno.h
new file mode 100644
index 000000000000..8c145fd17d86
--- /dev/null
+++ b/arch/powerpc/include/asm/errno.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_POWERPC_ERRNO_H
+#define _ASM_POWERPC_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#undef	EDEADLOCK
+#define	EDEADLOCK	58	/* File locking deadlock error */
+
+#define _LAST_ERRNO	516
+
+#endif	/* _ASM_POWERPC_ERRNO_H */
diff --git a/arch/powerpc/include/asm/exception.h b/arch/powerpc/include/asm/exception.h
new file mode 100644
index 000000000000..329148b5acc6
--- /dev/null
+++ b/arch/powerpc/include/asm/exception.h
@@ -0,0 +1,311 @@
+#ifndef _ASM_POWERPC_EXCEPTION_H
+#define _ASM_POWERPC_EXCEPTION_H
+/*
+ * Extracted from head_64.S
+ *
+ *  PowerPC version
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *  Adapted for Power Macintosh by Paul Mackerras.
+ *  Low-level exception handlers and MMU support
+ *  rewritten by Paul Mackerras.
+ *    Copyright (C) 1996 Paul Mackerras.
+ *
+ *  Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
+ *    Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
+ *
+ *  This file contains the low-level support and setup for the
+ *  PowerPC-64 platform, including trap and interrupt dispatch.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+/*
+ * The following macros define the code that appears as
+ * the prologue to each of the exception handlers.  They
+ * are split into two parts to allow a single kernel binary
+ * to be used for pSeries and iSeries.
+ *
+ * We make as much of the exception code common between native
+ * exception handlers (including pSeries LPAR) and iSeries LPAR
+ * implementations as possible.
+ */
+
+#define EX_R9		0
+#define EX_R10		8
+#define EX_R11		16
+#define EX_R12		24
+#define EX_R13		32
+#define EX_SRR0		40
+#define EX_DAR		48
+#define EX_DSISR	56
+#define EX_CCR		60
+#define EX_R3		64
+#define EX_LR		72
+
+/*
+ * We're short on space and time in the exception prolog, so we can't
+ * use the normal SET_REG_IMMEDIATE macro. Normally we just need the
+ * low halfword of the address, but for Kdump we need the whole low
+ * word.
+ */
+#ifdef CONFIG_CRASH_DUMP
+#define LOAD_HANDLER(reg, label)					\
+	oris	reg,reg,(label)@h;	/* virt addr of handler ... */	\
+	ori	reg,reg,(label)@l;	/* .. and the rest */
+#else
+#define LOAD_HANDLER(reg, label)					\
+	ori	reg,reg,(label)@l;	/* virt addr of handler ... */
+#endif
+
+#define EXCEPTION_PROLOG_1(area)				\
+	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
+	std	r9,area+EX_R9(r13);	/* save r9 - r12 */		\
+	std	r10,area+EX_R10(r13);					\
+	std	r11,area+EX_R11(r13);					\
+	std	r12,area+EX_R12(r13);					\
+	mfspr	r9,SPRN_SPRG1;						\
+	std	r9,area+EX_R13(r13);					\
+	mfcr	r9
+
+/*
+ * Equal to EXCEPTION_PROLOG_PSERIES, except that it forces 64bit mode.
+ * The firmware calls the registered system_reset_fwnmi and
+ * machine_check_fwnmi handlers in 32bit mode if the cpu happens to run
+ * a 32bit application at the time of the event.
+ * This firmware bug is present on POWER4 and JS20.
+ */
+#define EXCEPTION_PROLOG_PSERIES_FORCE_64BIT(area, label)		\
+	EXCEPTION_PROLOG_1(area);					\
+	clrrdi	r12,r13,32;		/* get high part of &label */	\
+	mfmsr	r10;							\
+	/* force 64bit mode */						\
+	li	r11,5;			/* MSR_SF_LG|MSR_ISF_LG */	\
+	rldimi	r10,r11,61,0;		/* insert into top 3 bits */	\
+	/* done 64bit mode */						\
+	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	LOAD_HANDLER(r12,label)						\
+	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
+	mtspr	SPRN_SRR0,r12;						\
+	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
+	mtspr	SPRN_SRR1,r10;						\
+	rfid;								\
+	b	.	/* prevent speculative execution */
+
+#define EXCEPTION_PROLOG_PSERIES(area, label)				\
+	EXCEPTION_PROLOG_1(area);					\
+	clrrdi	r12,r13,32;		/* get high part of &label */	\
+	mfmsr	r10;							\
+	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	LOAD_HANDLER(r12,label)						\
+	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
+	mtspr	SPRN_SRR0,r12;						\
+	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
+	mtspr	SPRN_SRR1,r10;						\
+	rfid;								\
+	b	.	/* prevent speculative execution */
+
+/*
+ * The common exception prolog is used for all except a few exceptions
+ * such as a segment miss on a kernel address.  We have to be prepared
+ * to take another exception from the point where we first touch the
+ * kernel stack onwards.
+ *
+ * On entry r13 points to the paca, r9-r13 are saved in the paca,
+ * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
+ * SRR1, and relocation is on.
+ */
+#define EXCEPTION_PROLOG_COMMON(n, area)				   \
+	andi.	r10,r12,MSR_PR;		/* See if coming from user	*/ \
+	mr	r10,r1;			/* Save r1			*/ \
+	subi	r1,r1,INT_FRAME_SIZE;	/* alloc frame on kernel stack	*/ \
+	beq-	1f;							   \
+	ld	r1,PACAKSAVE(r13);	/* kernel stack to use		*/ \
+1:	cmpdi	cr1,r1,0;		/* check if r1 is in userspace	*/ \
+	bge-	cr1,2f;			/* abort if it is		*/ \
+	b	3f;							   \
+2:	li	r1,(n);			/* will be reloaded later	*/ \
+	sth	r1,PACA_TRAP_SAVE(r13);					   \
+	b	bad_stack;						   \
+3:	std	r9,_CCR(r1);		/* save CR in stackframe	*/ \
+	std	r11,_NIP(r1);		/* save SRR0 in stackframe	*/ \
+	std	r12,_MSR(r1);		/* save SRR1 in stackframe	*/ \
+	std	r10,0(r1);		/* make stack chain pointer	*/ \
+	std	r0,GPR0(r1);		/* save r0 in stackframe	*/ \
+	std	r10,GPR1(r1);		/* save r1 in stackframe	*/ \
+	ACCOUNT_CPU_USER_ENTRY(r9, r10);				   \
+	std	r2,GPR2(r1);		/* save r2 in stackframe	*/ \
+	SAVE_4GPRS(3, r1);		/* save r3 - r6 in stackframe	*/ \
+	SAVE_2GPRS(7, r1);		/* save r7, r8 in stackframe	*/ \
+	ld	r9,area+EX_R9(r13);	/* move r9, r10 to stackframe	*/ \
+	ld	r10,area+EX_R10(r13);					   \
+	std	r9,GPR9(r1);						   \
+	std	r10,GPR10(r1);						   \
+	ld	r9,area+EX_R11(r13);	/* move r11 - r13 to stackframe	*/ \
+	ld	r10,area+EX_R12(r13);					   \
+	ld	r11,area+EX_R13(r13);					   \
+	std	r9,GPR11(r1);						   \
+	std	r10,GPR12(r1);						   \
+	std	r11,GPR13(r1);						   \
+	ld	r2,PACATOC(r13);	/* get kernel TOC into r2	*/ \
+	mflr	r9;			/* save LR in stackframe	*/ \
+	std	r9,_LINK(r1);						   \
+	mfctr	r10;			/* save CTR in stackframe	*/ \
+	std	r10,_CTR(r1);						   \
+	lbz	r10,PACASOFTIRQEN(r13);				   \
+	mfspr	r11,SPRN_XER;		/* save XER in stackframe	*/ \
+	std	r10,SOFTE(r1);						   \
+	std	r11,_XER(r1);						   \
+	li	r9,(n)+1;						   \
+	std	r9,_TRAP(r1);		/* set trap number		*/ \
+	li	r10,0;							   \
+	ld	r11,exception_marker@toc(r2);				   \
+	std	r10,RESULT(r1);		/* clear regs->result		*/ \
+	std	r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame	*/
+
+/*
+ * Exception vectors.
+ */
+#define STD_EXCEPTION_PSERIES(n, label)			\
+	. = n;						\
+	.globl label##_pSeries;				\
+label##_pSeries:					\
+	HMT_MEDIUM;					\
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+
+#define HSTD_EXCEPTION_PSERIES(n, label)		\
+	. = n;						\
+	.globl label##_pSeries;				\
+label##_pSeries:					\
+	HMT_MEDIUM;					\
+	mtspr	SPRN_SPRG1,r20;		/* save r20 */	\
+	mfspr	r20,SPRN_HSRR0;		/* copy HSRR0 to SRR0 */ \
+	mtspr	SPRN_SRR0,r20;				\
+	mfspr	r20,SPRN_HSRR1;		/* copy HSRR0 to SRR0 */ \
+	mtspr	SPRN_SRR1,r20;				\
+	mfspr	r20,SPRN_SPRG1;		/* restore r20 */ \
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */	\
+	EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
+
+
+#define MASKABLE_EXCEPTION_PSERIES(n, label)				\
+	. = n;								\
+	.globl label##_pSeries;						\
+label##_pSeries:							\
+	HMT_MEDIUM;							\
+	mtspr	SPRN_SPRG1,r13;		/* save r13 */			\
+	mfspr	r13,SPRN_SPRG3;		/* get paca address into r13 */	\
+	std	r9,PACA_EXGEN+EX_R9(r13);	/* save r9, r10 */	\
+	std	r10,PACA_EXGEN+EX_R10(r13);				\
+	lbz	r10,PACASOFTIRQEN(r13);					\
+	mfcr	r9;							\
+	cmpwi	r10,0;							\
+	beq	masked_interrupt;					\
+	mfspr	r10,SPRN_SPRG1;						\
+	std	r10,PACA_EXGEN+EX_R13(r13);				\
+	std	r11,PACA_EXGEN+EX_R11(r13);				\
+	std	r12,PACA_EXGEN+EX_R12(r13);				\
+	clrrdi	r12,r13,32;		/* get high part of &label */	\
+	mfmsr	r10;							\
+	mfspr	r11,SPRN_SRR0;		/* save SRR0 */			\
+	LOAD_HANDLER(r12,label##_common)				\
+	ori	r10,r10,MSR_IR|MSR_DR|MSR_RI;				\
+	mtspr	SPRN_SRR0,r12;						\
+	mfspr	r12,SPRN_SRR1;		/* and SRR1 */			\
+	mtspr	SPRN_SRR1,r10;						\
+	rfid;								\
+	b	.	/* prevent speculative execution */
+
+#ifdef CONFIG_PPC_ISERIES
+#define DISABLE_INTS				\
+	li	r11,0;				\
+	stb	r11,PACASOFTIRQEN(r13);		\
+BEGIN_FW_FTR_SECTION;				\
+	stb	r11,PACAHARDIRQEN(r13);		\
+END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES);	\
+	TRACE_DISABLE_INTS;			\
+BEGIN_FW_FTR_SECTION;				\
+	mfmsr	r10;				\
+	ori	r10,r10,MSR_EE;			\
+	mtmsrd	r10,1;				\
+END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
+#else
+#define DISABLE_INTS				\
+	li	r11,0;				\
+	stb	r11,PACASOFTIRQEN(r13);		\
+	stb	r11,PACAHARDIRQEN(r13);		\
+	TRACE_DISABLE_INTS
+#endif /* CONFIG_PPC_ISERIES */
+
+#define ENABLE_INTS				\
+	ld	r12,_MSR(r1);			\
+	mfmsr	r11;				\
+	rlwimi	r11,r12,0,MSR_EE;		\
+	mtmsrd	r11,1
+
+#define STD_EXCEPTION_COMMON(trap, label, hdlr)		\
+	.align	7;					\
+	.globl label##_common;				\
+label##_common:						\
+	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
+	DISABLE_INTS;					\
+	bl	.save_nvgprs;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
+	bl	hdlr;					\
+	b	.ret_from_except
+
+/*
+ * Like STD_EXCEPTION_COMMON, but for exceptions that can occur
+ * in the idle task and therefore need the special idle handling.
+ */
+#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr)	\
+	.align	7;					\
+	.globl label##_common;				\
+label##_common:						\
+	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
+	FINISH_NAP;					\
+	DISABLE_INTS;					\
+	bl	.save_nvgprs;				\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
+	bl	hdlr;					\
+	b	.ret_from_except
+
+#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr)	\
+	.align	7;					\
+	.globl label##_common;				\
+label##_common:						\
+	EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN);	\
+	FINISH_NAP;					\
+	DISABLE_INTS;					\
+BEGIN_FTR_SECTION					\
+	bl	.ppc64_runlatch_on;			\
+END_FTR_SECTION_IFSET(CPU_FTR_CTRL)			\
+	addi	r3,r1,STACK_FRAME_OVERHEAD;		\
+	bl	hdlr;					\
+	b	.ret_from_except_lite
+
+/*
+ * When the idle code in power4_idle puts the CPU into NAP mode,
+ * it has to do so in a loop, and relies on the external interrupt
+ * and decrementer interrupt entry code to get it out of the loop.
+ * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
+ * to signal that it is in the loop and needs help to get out.
+ */
+#ifdef CONFIG_PPC_970_NAP
+#define FINISH_NAP				\
+BEGIN_FTR_SECTION				\
+	clrrdi	r11,r1,THREAD_SHIFT;		\
+	ld	r9,TI_LOCAL_FLAGS(r11);		\
+	andi.	r10,r9,_TLF_NAPPING;		\
+	bnel	power4_fixup_nap;		\
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+#else
+#define FINISH_NAP
+#endif
+
+#endif	/* _ASM_POWERPC_EXCEPTION_H */
diff --git a/arch/powerpc/include/asm/fb.h b/arch/powerpc/include/asm/fb.h
new file mode 100644
index 000000000000..411af8d17a69
--- /dev/null
+++ b/arch/powerpc/include/asm/fb.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	vma->vm_page_prot = phys_mem_access_prot(file, off >> PAGE_SHIFT,
+						 vma->vm_end - vma->vm_start,
+						 vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/powerpc/include/asm/fcntl.h b/arch/powerpc/include/asm/fcntl.h
new file mode 100644
index 000000000000..ce5c4516d404
--- /dev/null
+++ b/arch/powerpc/include/asm/fcntl.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_FCNTL_H
+#define _ASM_FCNTL_H
+
+#define O_DIRECTORY      040000	/* must be a directory */
+#define O_NOFOLLOW      0100000	/* don't follow links */
+#define O_LARGEFILE     0200000
+#define O_DIRECT	0400000	/* direct disk access hint */
+
+#include <asm-generic/fcntl.h>
+
+#endif /* _ASM_FCNTL_H */
diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h
new file mode 100644
index 000000000000..a1029967620b
--- /dev/null
+++ b/arch/powerpc/include/asm/feature-fixups.h
@@ -0,0 +1,126 @@
+#ifndef __ASM_POWERPC_FEATURE_FIXUPS_H
+#define __ASM_POWERPC_FEATURE_FIXUPS_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __ASSEMBLY__
+
+/*
+ * Feature section common macros
+ *
+ * Note that the entries now contain offsets between the table entry
+ * and the code rather than absolute code pointers in order to be
+ * useable with the vdso shared library. There is also an assumption
+ * that values will be negative, that is, the fixup table has to be
+ * located after the code it fixes up.
+ */
+#if defined(CONFIG_PPC64) && !defined(__powerpc64__)
+/* 64 bits kernel, 32 bits code (ie. vdso32) */
+#define FTR_ENTRY_LONG		.llong
+#define FTR_ENTRY_OFFSET	.long 0xffffffff; .long
+#else
+/* 64 bit kernel 64 bit code, or 32 bit kernel 32 bit code */
+#define FTR_ENTRY_LONG		PPC_LONG
+#define FTR_ENTRY_OFFSET	PPC_LONG
+#endif
+
+#define START_FTR_SECTION(label)	label##1:
+
+#define FTR_SECTION_ELSE_NESTED(label)			\
+label##2:						\
+	.pushsection __ftr_alt_##label,"a";		\
+	.align 2;					\
+label##3:
+
+#define MAKE_FTR_SECTION_ENTRY(msk, val, label, sect)	\
+label##4:						\
+	.popsection;					\
+	.pushsection sect,"a";				\
+	.align 3;					\
+label##5:					       	\
+	FTR_ENTRY_LONG msk;				\
+	FTR_ENTRY_LONG val;				\
+	FTR_ENTRY_OFFSET label##1b-label##5b;		\
+	FTR_ENTRY_OFFSET label##2b-label##5b;	 	\
+	FTR_ENTRY_OFFSET label##3b-label##5b;		\
+	FTR_ENTRY_OFFSET label##4b-label##5b;	 	\
+	.popsection;
+
+
+/* CPU feature dependent sections */
+#define BEGIN_FTR_SECTION_NESTED(label)	START_FTR_SECTION(label)
+#define BEGIN_FTR_SECTION		START_FTR_SECTION(97)
+
+#define END_FTR_SECTION_NESTED(msk, val, label) 		\
+	FTR_SECTION_ELSE_NESTED(label)				\
+	MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup)
+
+#define END_FTR_SECTION(msk, val)		\
+	END_FTR_SECTION_NESTED(msk, val, 97)
+
+#define END_FTR_SECTION_IFSET(msk)	END_FTR_SECTION((msk), (msk))
+#define END_FTR_SECTION_IFCLR(msk)	END_FTR_SECTION((msk), 0)
+
+/* CPU feature sections with alternatives, use BEGIN_FTR_SECTION to start */
+#define FTR_SECTION_ELSE	FTR_SECTION_ELSE_NESTED(97)
+#define ALT_FTR_SECTION_END_NESTED(msk, val, label)	\
+	MAKE_FTR_SECTION_ENTRY(msk, val, label, __ftr_fixup)
+#define ALT_FTR_SECTION_END_NESTED_IFSET(msk, label)	\
+	ALT_FTR_SECTION_END_NESTED(msk, msk, label)
+#define ALT_FTR_SECTION_END_NESTED_IFCLR(msk, label)	\
+	ALT_FTR_SECTION_END_NESTED(msk, 0, label)
+#define ALT_FTR_SECTION_END(msk, val)	\
+	ALT_FTR_SECTION_END_NESTED(msk, val, 97)
+#define ALT_FTR_SECTION_END_IFSET(msk)	\
+	ALT_FTR_SECTION_END_NESTED_IFSET(msk, 97)
+#define ALT_FTR_SECTION_END_IFCLR(msk)	\
+	ALT_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
+
+/* Firmware feature dependent sections */
+#define BEGIN_FW_FTR_SECTION_NESTED(label)	START_FTR_SECTION(label)
+#define BEGIN_FW_FTR_SECTION			START_FTR_SECTION(97)
+
+#define END_FW_FTR_SECTION_NESTED(msk, val, label) 		\
+	FTR_SECTION_ELSE_NESTED(label)				\
+	MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup)
+
+#define END_FW_FTR_SECTION(msk, val)		\
+	END_FW_FTR_SECTION_NESTED(msk, val, 97)
+
+#define END_FW_FTR_SECTION_IFSET(msk)	END_FW_FTR_SECTION((msk), (msk))
+#define END_FW_FTR_SECTION_IFCLR(msk)	END_FW_FTR_SECTION((msk), 0)
+
+/* Firmware feature sections with alternatives */
+#define FW_FTR_SECTION_ELSE_NESTED(label)	FTR_SECTION_ELSE_NESTED(label)
+#define FW_FTR_SECTION_ELSE	FTR_SECTION_ELSE_NESTED(97)
+#define ALT_FW_FTR_SECTION_END_NESTED(msk, val, label)	\
+	MAKE_FTR_SECTION_ENTRY(msk, val, label, __fw_ftr_fixup)
+#define ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, label)	\
+	ALT_FW_FTR_SECTION_END_NESTED(msk, msk, label)
+#define ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, label)	\
+	ALT_FW_FTR_SECTION_END_NESTED(msk, 0, label)
+#define ALT_FW_FTR_SECTION_END(msk, val)	\
+	ALT_FW_FTR_SECTION_END_NESTED(msk, val, 97)
+#define ALT_FW_FTR_SECTION_END_IFSET(msk)	\
+	ALT_FW_FTR_SECTION_END_NESTED_IFSET(msk, 97)
+#define ALT_FW_FTR_SECTION_END_IFCLR(msk)	\
+	ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
+
+#endif /* __ASSEMBLY__ */
+
+/* LWSYNC feature sections */
+#define START_LWSYNC_SECTION(label)	label##1:
+#define MAKE_LWSYNC_SECTION_ENTRY(label, sect)		\
+label##2:						\
+	.pushsection sect,"a";				\
+	.align 2;					\
+label##3:					       	\
+	.long label##1b-label##3b;			\
+	.popsection;
+
+#endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
new file mode 100644
index 000000000000..3a179827528d
--- /dev/null
+++ b/arch/powerpc/include/asm/firmware.h
@@ -0,0 +1,132 @@
+/*
+ *  Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  Modifications for ppc64:
+ *      Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifndef __ASM_POWERPC_FIRMWARE_H
+#define __ASM_POWERPC_FIRMWARE_H
+
+#ifdef __KERNEL__
+
+#include <asm/asm-compat.h>
+#include <asm/feature-fixups.h>
+
+/* firmware feature bitmask values */
+#define FIRMWARE_MAX_FEATURES 63
+
+#define FW_FEATURE_PFT		ASM_CONST(0x0000000000000001)
+#define FW_FEATURE_TCE		ASM_CONST(0x0000000000000002)
+#define FW_FEATURE_SPRG0	ASM_CONST(0x0000000000000004)
+#define FW_FEATURE_DABR		ASM_CONST(0x0000000000000008)
+#define FW_FEATURE_COPY		ASM_CONST(0x0000000000000010)
+#define FW_FEATURE_ASR		ASM_CONST(0x0000000000000020)
+#define FW_FEATURE_DEBUG	ASM_CONST(0x0000000000000040)
+#define FW_FEATURE_TERM		ASM_CONST(0x0000000000000080)
+#define FW_FEATURE_PERF		ASM_CONST(0x0000000000000100)
+#define FW_FEATURE_DUMP		ASM_CONST(0x0000000000000200)
+#define FW_FEATURE_INTERRUPT	ASM_CONST(0x0000000000000400)
+#define FW_FEATURE_MIGRATE	ASM_CONST(0x0000000000000800)
+#define FW_FEATURE_PERFMON	ASM_CONST(0x0000000000001000)
+#define FW_FEATURE_CRQ		ASM_CONST(0x0000000000002000)
+#define FW_FEATURE_VIO		ASM_CONST(0x0000000000004000)
+#define FW_FEATURE_RDMA		ASM_CONST(0x0000000000008000)
+#define FW_FEATURE_LLAN		ASM_CONST(0x0000000000010000)
+#define FW_FEATURE_BULK		ASM_CONST(0x0000000000020000)
+#define FW_FEATURE_XDABR	ASM_CONST(0x0000000000040000)
+#define FW_FEATURE_MULTITCE	ASM_CONST(0x0000000000080000)
+#define FW_FEATURE_SPLPAR	ASM_CONST(0x0000000000100000)
+#define FW_FEATURE_ISERIES	ASM_CONST(0x0000000000200000)
+#define FW_FEATURE_LPAR		ASM_CONST(0x0000000000400000)
+#define FW_FEATURE_PS3_LV1	ASM_CONST(0x0000000000800000)
+#define FW_FEATURE_BEAT		ASM_CONST(0x0000000001000000)
+#define FW_FEATURE_BULK_REMOVE	ASM_CONST(0x0000000002000000)
+#define FW_FEATURE_CMO		ASM_CONST(0x0000000004000000)
+
+#ifndef __ASSEMBLY__
+
+enum {
+#ifdef CONFIG_PPC64
+	FW_FEATURE_PSERIES_POSSIBLE = FW_FEATURE_PFT | FW_FEATURE_TCE |
+		FW_FEATURE_SPRG0 | FW_FEATURE_DABR | FW_FEATURE_COPY |
+		FW_FEATURE_ASR | FW_FEATURE_DEBUG | FW_FEATURE_TERM |
+		FW_FEATURE_PERF | FW_FEATURE_DUMP | FW_FEATURE_INTERRUPT |
+		FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ |
+		FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
+		FW_FEATURE_BULK | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE |
+		FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO,
+	FW_FEATURE_PSERIES_ALWAYS = 0,
+	FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
+	FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
+	FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
+	FW_FEATURE_PS3_ALWAYS = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1,
+	FW_FEATURE_CELLEB_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_BEAT,
+	FW_FEATURE_CELLEB_ALWAYS = 0,
+	FW_FEATURE_NATIVE_POSSIBLE = 0,
+	FW_FEATURE_NATIVE_ALWAYS = 0,
+	FW_FEATURE_POSSIBLE =
+#ifdef CONFIG_PPC_PSERIES
+		FW_FEATURE_PSERIES_POSSIBLE |
+#endif
+#ifdef CONFIG_PPC_ISERIES
+		FW_FEATURE_ISERIES_POSSIBLE |
+#endif
+#ifdef CONFIG_PPC_PS3
+		FW_FEATURE_PS3_POSSIBLE |
+#endif
+#ifdef CONFIG_PPC_CELLEB
+		FW_FEATURE_CELLEB_POSSIBLE |
+#endif
+#ifdef CONFIG_PPC_NATIVE
+		FW_FEATURE_NATIVE_ALWAYS |
+#endif
+		0,
+	FW_FEATURE_ALWAYS =
+#ifdef CONFIG_PPC_PSERIES
+		FW_FEATURE_PSERIES_ALWAYS &
+#endif
+#ifdef CONFIG_PPC_ISERIES
+		FW_FEATURE_ISERIES_ALWAYS &
+#endif
+#ifdef CONFIG_PPC_PS3
+		FW_FEATURE_PS3_ALWAYS &
+#endif
+#ifdef CONFIG_PPC_CELLEB
+		FW_FEATURE_CELLEB_ALWAYS &
+#endif
+#ifdef CONFIG_PPC_NATIVE
+		FW_FEATURE_NATIVE_ALWAYS &
+#endif
+		FW_FEATURE_POSSIBLE,
+
+#else /* CONFIG_PPC64 */
+	FW_FEATURE_POSSIBLE = 0,
+	FW_FEATURE_ALWAYS = 0,
+#endif
+};
+
+/* This is used to identify firmware features which are available
+ * to the kernel.
+ */
+extern unsigned long	powerpc_firmware_features;
+
+#define firmware_has_feature(feature)					\
+	((FW_FEATURE_ALWAYS & (feature)) ||				\
+		(FW_FEATURE_POSSIBLE & powerpc_firmware_features & (feature)))
+
+extern void system_reset_fwnmi(void);
+extern void machine_check_fwnmi(void);
+
+/* This is true if we are using the firmware NMI handler (typically LPAR) */
+extern int fwnmi_active;
+
+extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup;
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_FIRMWARE_H */
diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h
new file mode 100644
index 000000000000..8428b38a3d30
--- /dev/null
+++ b/arch/powerpc/include/asm/fixmap.h
@@ -0,0 +1,106 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ *   Port to powerpc added by Kumar Gala
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+extern unsigned long FIXADDR_TOP;
+
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special addresses
+ * from the end of virtual memory (0xfffff000) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+enum fixed_addresses {
+	FIX_HOLE,
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+	/* FIX_PCIE_MCFG, */
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap (enum fixed_addresses idx,
+					phys_addr_t phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+
+#define clear_fixmap(idx) \
+		__set_fixmap(idx, 0, __pgprot(0))
+
+#define __FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START		(FIXADDR_TOP - __FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static __always_inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+
+#endif /* !__ASSEMBLY__ */
+#endif
diff --git a/arch/powerpc/include/asm/floppy.h b/arch/powerpc/include/asm/floppy.h
new file mode 100644
index 000000000000..24bd34c57e9d
--- /dev/null
+++ b/arch/powerpc/include/asm/floppy.h
@@ -0,0 +1,213 @@
+/*
+ * Architecture specific parts of the Floppy driver
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995
+ */
+#ifndef __ASM_POWERPC_FLOPPY_H
+#define __ASM_POWERPC_FLOPPY_H
+#ifdef __KERNEL__
+
+#include <asm/machdep.h>
+
+#define fd_inb(port)		inb_p(port)
+#define fd_outb(value,port)	outb_p(value,port)
+
+#define fd_enable_dma()         enable_dma(FLOPPY_DMA)
+#define fd_disable_dma()	 fd_ops->_disable_dma(FLOPPY_DMA)
+#define fd_free_dma()           fd_ops->_free_dma(FLOPPY_DMA)
+#define fd_clear_dma_ff()       clear_dma_ff(FLOPPY_DMA)
+#define fd_set_dma_mode(mode)   set_dma_mode(FLOPPY_DMA, mode)
+#define fd_set_dma_count(count) set_dma_count(FLOPPY_DMA, count)
+#define fd_get_dma_residue()    fd_ops->_get_dma_residue(FLOPPY_DMA)
+#define fd_enable_irq()         enable_irq(FLOPPY_IRQ)
+#define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
+#define fd_cacheflush(addr,size) /* nothing */
+#define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL);
+
+#include <linux/pci.h>
+#include <asm/ppc-pci.h>	/* for isa_bridge_pcidev */
+
+#define fd_dma_setup(addr,size,mode,io) fd_ops->_dma_setup(addr,size,mode,io)
+
+static int fd_request_dma(void);
+
+struct fd_dma_ops {
+	void (*_disable_dma)(unsigned int dmanr);
+	void (*_free_dma)(unsigned int dmanr);
+	int (*_get_dma_residue)(unsigned int dummy);
+	int (*_dma_setup)(char *addr, unsigned long size, int mode, int io);
+};
+
+static int virtual_dma_count;
+static int virtual_dma_residue;
+static char *virtual_dma_addr;
+static int virtual_dma_mode;
+static int doing_vdma;
+static struct fd_dma_ops *fd_ops;
+
+static irqreturn_t floppy_hardint(int irq, void *dev_id)
+{
+	unsigned char st;
+	int lcount;
+	char *lptr;
+
+	if (!doing_vdma)
+		return floppy_interrupt(irq, dev_id);
+
+
+	st = 1;
+	for (lcount=virtual_dma_count, lptr=virtual_dma_addr;
+	     lcount; lcount--, lptr++) {
+		st=inb(virtual_dma_port+4) & 0xa0 ;
+		if (st != 0xa0)
+			break;
+		if (virtual_dma_mode)
+			outb_p(*lptr, virtual_dma_port+5);
+		else
+			*lptr = inb_p(virtual_dma_port+5);
+	}
+	virtual_dma_count = lcount;
+	virtual_dma_addr = lptr;
+	st = inb(virtual_dma_port+4);
+
+	if (st == 0x20)
+		return IRQ_HANDLED;
+	if (!(st & 0x20)) {
+		virtual_dma_residue += virtual_dma_count;
+		virtual_dma_count=0;
+		doing_vdma = 0;
+		floppy_interrupt(irq, dev_id);
+		return IRQ_HANDLED;
+	}
+	return IRQ_HANDLED;
+}
+
+static void vdma_disable_dma(unsigned int dummy)
+{
+	doing_vdma = 0;
+	virtual_dma_residue += virtual_dma_count;
+	virtual_dma_count=0;
+}
+
+static void vdma_nop(unsigned int dummy)
+{
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+	return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static int fd_request_irq(void)
+{
+	if (can_use_virtual_dma)
+		return request_irq(FLOPPY_IRQ, floppy_hardint,
+				   IRQF_DISABLED, "floppy", NULL);
+	else
+		return request_irq(FLOPPY_IRQ, floppy_interrupt,
+				   IRQF_DISABLED, "floppy", NULL);
+}
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	doing_vdma = 1;
+	virtual_dma_port = io;
+	virtual_dma_mode = (mode  == DMA_MODE_WRITE);
+	virtual_dma_addr = addr;
+	virtual_dma_count = size;
+	virtual_dma_residue = 0;
+	return 0;
+}
+
+static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+	static unsigned long prev_size;
+	static dma_addr_t bus_addr = 0;
+	static char *prev_addr;
+	static int prev_dir;
+	int dir;
+
+	doing_vdma = 0;
+	dir = (mode == DMA_MODE_READ) ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE;
+
+	if (bus_addr 
+	    && (addr != prev_addr || size != prev_size || dir != prev_dir)) {
+		/* different from last time -- unmap prev */
+		pci_unmap_single(isa_bridge_pcidev, bus_addr, prev_size, prev_dir);
+		bus_addr = 0;
+	}
+
+	if (!bus_addr)	/* need to map it */
+		bus_addr = pci_map_single(isa_bridge_pcidev, addr, size, dir);
+
+	/* remember this one as prev */
+	prev_addr = addr;
+	prev_size = size;
+	prev_dir = dir;
+
+	fd_clear_dma_ff();
+	fd_cacheflush(addr, size);
+	fd_set_dma_mode(mode);
+	set_dma_addr(FLOPPY_DMA, bus_addr);
+	fd_set_dma_count(size);
+	virtual_dma_port = io;
+	fd_enable_dma();
+
+	return 0;
+}
+
+static struct fd_dma_ops real_dma_ops =
+{
+	._disable_dma = disable_dma,
+	._free_dma = free_dma,
+	._get_dma_residue = get_dma_residue,
+	._dma_setup = hard_dma_setup
+};
+
+static struct fd_dma_ops virt_dma_ops =
+{
+	._disable_dma = vdma_disable_dma,
+	._free_dma = vdma_nop,
+	._get_dma_residue = vdma_get_dma_residue,
+	._dma_setup = vdma_dma_setup
+};
+
+static int fd_request_dma(void)
+{
+	if (can_use_virtual_dma & 1) {
+		fd_ops = &virt_dma_ops;
+		return 0;
+	}
+	else {
+		fd_ops = &real_dma_ops;
+		return request_dma(FLOPPY_DMA, "floppy");
+	}
+}
+
+static int FDC1 = 0x3f0;
+static int FDC2 = -1;
+
+/*
+ * Again, the CMOS information not available
+ */
+#define FLOPPY0_TYPE 6
+#define FLOPPY1_TYPE 0
+
+#define N_FDC 2			/* Don't change this! */
+#define N_DRIVE 8
+
+/*
+ * The PowerPC has no problems with floppy DMA crossing 64k borders.
+ */
+#define CROSS_64KB(a,s)	(0)
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_FLOPPY_H */
diff --git a/arch/powerpc/include/asm/fs_pd.h b/arch/powerpc/include/asm/fs_pd.h
new file mode 100644
index 000000000000..9361cd5342cc
--- /dev/null
+++ b/arch/powerpc/include/asm/fs_pd.h
@@ -0,0 +1,50 @@
+/*
+ * Platform information definitions.
+ *
+ * 2006 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef FS_PD_H
+#define FS_PD_H
+#include <sysdev/fsl_soc.h>
+#include <asm/time.h>
+
+#ifdef CONFIG_CPM2
+#include <asm/cpm2.h>
+
+#if defined(CONFIG_8260)
+#include <asm/mpc8260.h>
+#endif
+
+#define cpm2_map(member) (&cpm2_immr->member)
+#define cpm2_map_size(member, size) (&cpm2_immr->member)
+#define cpm2_unmap(addr) do {} while(0)
+#endif
+
+#ifdef CONFIG_8xx
+#include <asm/8xx_immap.h>
+#include <asm/mpc8xx.h>
+
+extern immap_t __iomem *mpc8xx_immr;
+
+#define immr_map(member) (&mpc8xx_immr->member)
+#define immr_map_size(member, size) (&mpc8xx_immr->member)
+#define immr_unmap(addr) do {} while (0)
+#endif
+
+static inline int uart_baudrate(void)
+{
+        return get_baudrate();
+}
+
+static inline int uart_clock(void)
+{
+        return ppc_proc_freq;
+}
+
+#endif
diff --git a/arch/powerpc/include/asm/fsl_gtm.h b/arch/powerpc/include/asm/fsl_gtm.h
new file mode 100644
index 000000000000..8e8c9b5032d3
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_gtm.h
@@ -0,0 +1,47 @@
+/*
+ * Freescale General-purpose Timers Module
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __ASM_FSL_GTM_H
+#define __ASM_FSL_GTM_H
+
+#include <linux/types.h>
+
+struct gtm;
+
+struct gtm_timer {
+	unsigned int irq;
+
+	struct gtm *gtm;
+	bool requested;
+	u8 __iomem *gtcfr;
+	__be16 __iomem *gtmdr;
+	__be16 __iomem *gtpsr;
+	__be16 __iomem *gtcnr;
+	__be16 __iomem *gtrfr;
+	__be16 __iomem *gtevr;
+};
+
+extern struct gtm_timer *gtm_get_timer16(void);
+extern struct gtm_timer *gtm_get_specific_timer16(struct gtm *gtm,
+						  unsigned int timer);
+extern void gtm_put_timer16(struct gtm_timer *tmr);
+extern int gtm_set_timer16(struct gtm_timer *tmr, unsigned long usec,
+			     bool reload);
+extern int gtm_set_exact_timer16(struct gtm_timer *tmr, u16 usec,
+				 bool reload);
+extern void gtm_stop_timer16(struct gtm_timer *tmr);
+extern void gtm_ack_timer16(struct gtm_timer *tmr, u16 events);
+
+#endif /* __ASM_FSL_GTM_H */
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
new file mode 100644
index 000000000000..303f5484c050
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -0,0 +1,311 @@
+/* Freescale Local Bus Controller
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor
+ *
+ * Authors: Nick Spence <nick.spence@freescale.com>,
+ *          Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_FSL_LBC_H
+#define __ASM_FSL_LBC_H
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+
+struct fsl_lbc_bank {
+	__be32 br;             /**< Base Register  */
+#define BR_BA           0xFFFF8000
+#define BR_BA_SHIFT             15
+#define BR_PS           0x00001800
+#define BR_PS_SHIFT             11
+#define BR_PS_8         0x00000800  /* Port Size 8 bit */
+#define BR_PS_16        0x00001000  /* Port Size 16 bit */
+#define BR_PS_32        0x00001800  /* Port Size 32 bit */
+#define BR_DECC         0x00000600
+#define BR_DECC_SHIFT            9
+#define BR_DECC_OFF     0x00000000  /* HW ECC checking and generation off */
+#define BR_DECC_CHK     0x00000200  /* HW ECC checking on, generation off */
+#define BR_DECC_CHK_GEN 0x00000400  /* HW ECC checking and generation on */
+#define BR_WP           0x00000100
+#define BR_WP_SHIFT              8
+#define BR_MSEL         0x000000E0
+#define BR_MSEL_SHIFT            5
+#define BR_MS_GPCM      0x00000000  /* GPCM */
+#define BR_MS_FCM       0x00000020  /* FCM */
+#define BR_MS_SDRAM     0x00000060  /* SDRAM */
+#define BR_MS_UPMA      0x00000080  /* UPMA */
+#define BR_MS_UPMB      0x000000A0  /* UPMB */
+#define BR_MS_UPMC      0x000000C0  /* UPMC */
+#define BR_V            0x00000001
+#define BR_V_SHIFT               0
+#define BR_RES          ~(BR_BA|BR_PS|BR_DECC|BR_WP|BR_MSEL|BR_V)
+
+	__be32 or;             /**< Base Register  */
+#define OR0 0x5004
+#define OR1 0x500C
+#define OR2 0x5014
+#define OR3 0x501C
+#define OR4 0x5024
+#define OR5 0x502C
+#define OR6 0x5034
+#define OR7 0x503C
+
+#define OR_FCM_AM               0xFFFF8000
+#define OR_FCM_AM_SHIFT                 15
+#define OR_FCM_BCTLD            0x00001000
+#define OR_FCM_BCTLD_SHIFT              12
+#define OR_FCM_PGS              0x00000400
+#define OR_FCM_PGS_SHIFT                10
+#define OR_FCM_CSCT             0x00000200
+#define OR_FCM_CSCT_SHIFT                9
+#define OR_FCM_CST              0x00000100
+#define OR_FCM_CST_SHIFT                 8
+#define OR_FCM_CHT              0x00000080
+#define OR_FCM_CHT_SHIFT                 7
+#define OR_FCM_SCY              0x00000070
+#define OR_FCM_SCY_SHIFT                 4
+#define OR_FCM_SCY_1            0x00000010
+#define OR_FCM_SCY_2            0x00000020
+#define OR_FCM_SCY_3            0x00000030
+#define OR_FCM_SCY_4            0x00000040
+#define OR_FCM_SCY_5            0x00000050
+#define OR_FCM_SCY_6            0x00000060
+#define OR_FCM_SCY_7            0x00000070
+#define OR_FCM_RST              0x00000008
+#define OR_FCM_RST_SHIFT                 3
+#define OR_FCM_TRLX             0x00000004
+#define OR_FCM_TRLX_SHIFT                2
+#define OR_FCM_EHTR             0x00000002
+#define OR_FCM_EHTR_SHIFT                1
+};
+
+struct fsl_lbc_regs {
+	struct fsl_lbc_bank bank[8];
+	u8 res0[0x28];
+	__be32 mar;             /**< UPM Address Register */
+	u8 res1[0x4];
+	__be32 mamr;            /**< UPMA Mode Register */
+#define MxMR_OP_NO	(0 << 28) /**< normal operation */
+#define MxMR_OP_WA	(1 << 28) /**< write array */
+#define MxMR_OP_RA	(2 << 28) /**< read array */
+#define MxMR_OP_RP	(3 << 28) /**< run pattern */
+#define MxMR_MAD	0x3f      /**< machine address */
+	__be32 mbmr;            /**< UPMB Mode Register */
+	__be32 mcmr;            /**< UPMC Mode Register */
+	u8 res2[0x8];
+	__be32 mrtpr;           /**< Memory Refresh Timer Prescaler Register */
+	__be32 mdr;             /**< UPM Data Register */
+	u8 res3[0x4];
+	__be32 lsor;            /**< Special Operation Initiation Register */
+	__be32 lsdmr;           /**< SDRAM Mode Register */
+	u8 res4[0x8];
+	__be32 lurt;            /**< UPM Refresh Timer */
+	__be32 lsrt;            /**< SDRAM Refresh Timer */
+	u8 res5[0x8];
+	__be32 ltesr;           /**< Transfer Error Status Register */
+#define LTESR_BM   0x80000000
+#define LTESR_FCT  0x40000000
+#define LTESR_PAR  0x20000000
+#define LTESR_WP   0x04000000
+#define LTESR_ATMW 0x00800000
+#define LTESR_ATMR 0x00400000
+#define LTESR_CS   0x00080000
+#define LTESR_CC   0x00000001
+#define LTESR_NAND_MASK (LTESR_FCT | LTESR_PAR | LTESR_CC)
+	__be32 ltedr;           /**< Transfer Error Disable Register */
+	__be32 lteir;           /**< Transfer Error Interrupt Register */
+	__be32 lteatr;          /**< Transfer Error Attributes Register */
+	__be32 ltear;           /**< Transfer Error Address Register */
+	u8 res6[0xC];
+	__be32 lbcr;            /**< Configuration Register */
+#define LBCR_LDIS  0x80000000
+#define LBCR_LDIS_SHIFT    31
+#define LBCR_BCTLC 0x00C00000
+#define LBCR_BCTLC_SHIFT   22
+#define LBCR_AHD   0x00200000
+#define LBCR_LPBSE 0x00020000
+#define LBCR_LPBSE_SHIFT   17
+#define LBCR_EPAR  0x00010000
+#define LBCR_EPAR_SHIFT    16
+#define LBCR_BMT   0x0000FF00
+#define LBCR_BMT_SHIFT      8
+#define LBCR_INIT  0x00040000
+	__be32 lcrr;            /**< Clock Ratio Register */
+#define LCRR_DBYP    0x80000000
+#define LCRR_DBYP_SHIFT      31
+#define LCRR_BUFCMDC 0x30000000
+#define LCRR_BUFCMDC_SHIFT   28
+#define LCRR_ECL     0x03000000
+#define LCRR_ECL_SHIFT       24
+#define LCRR_EADC    0x00030000
+#define LCRR_EADC_SHIFT      16
+#define LCRR_CLKDIV  0x0000000F
+#define LCRR_CLKDIV_SHIFT     0
+	u8 res7[0x8];
+	__be32 fmr;             /**< Flash Mode Register */
+#define FMR_CWTO     0x0000F000
+#define FMR_CWTO_SHIFT       12
+#define FMR_BOOT     0x00000800
+#define FMR_ECCM     0x00000100
+#define FMR_AL       0x00000030
+#define FMR_AL_SHIFT          4
+#define FMR_OP       0x00000003
+#define FMR_OP_SHIFT          0
+	__be32 fir;             /**< Flash Instruction Register */
+#define FIR_OP0      0xF0000000
+#define FIR_OP0_SHIFT        28
+#define FIR_OP1      0x0F000000
+#define FIR_OP1_SHIFT        24
+#define FIR_OP2      0x00F00000
+#define FIR_OP2_SHIFT        20
+#define FIR_OP3      0x000F0000
+#define FIR_OP3_SHIFT        16
+#define FIR_OP4      0x0000F000
+#define FIR_OP4_SHIFT        12
+#define FIR_OP5      0x00000F00
+#define FIR_OP5_SHIFT         8
+#define FIR_OP6      0x000000F0
+#define FIR_OP6_SHIFT         4
+#define FIR_OP7      0x0000000F
+#define FIR_OP7_SHIFT         0
+#define FIR_OP_NOP   0x0	/* No operation and end of sequence */
+#define FIR_OP_CA    0x1        /* Issue current column address */
+#define FIR_OP_PA    0x2        /* Issue current block+page address */
+#define FIR_OP_UA    0x3        /* Issue user defined address */
+#define FIR_OP_CM0   0x4        /* Issue command from FCR[CMD0] */
+#define FIR_OP_CM1   0x5        /* Issue command from FCR[CMD1] */
+#define FIR_OP_CM2   0x6        /* Issue command from FCR[CMD2] */
+#define FIR_OP_CM3   0x7        /* Issue command from FCR[CMD3] */
+#define FIR_OP_WB    0x8        /* Write FBCR bytes from FCM buffer */
+#define FIR_OP_WS    0x9        /* Write 1 or 2 bytes from MDR[AS] */
+#define FIR_OP_RB    0xA        /* Read FBCR bytes to FCM buffer */
+#define FIR_OP_RS    0xB        /* Read 1 or 2 bytes to MDR[AS] */
+#define FIR_OP_CW0   0xC        /* Wait then issue FCR[CMD0] */
+#define FIR_OP_CW1   0xD        /* Wait then issue FCR[CMD1] */
+#define FIR_OP_RBW   0xE        /* Wait then read FBCR bytes */
+#define FIR_OP_RSW   0xE        /* Wait then read 1 or 2 bytes */
+	__be32 fcr;             /**< Flash Command Register */
+#define FCR_CMD0     0xFF000000
+#define FCR_CMD0_SHIFT       24
+#define FCR_CMD1     0x00FF0000
+#define FCR_CMD1_SHIFT       16
+#define FCR_CMD2     0x0000FF00
+#define FCR_CMD2_SHIFT        8
+#define FCR_CMD3     0x000000FF
+#define FCR_CMD3_SHIFT        0
+	__be32 fbar;            /**< Flash Block Address Register */
+#define FBAR_BLK     0x00FFFFFF
+	__be32 fpar;            /**< Flash Page Address Register */
+#define FPAR_SP_PI   0x00007C00
+#define FPAR_SP_PI_SHIFT     10
+#define FPAR_SP_MS   0x00000200
+#define FPAR_SP_CI   0x000001FF
+#define FPAR_SP_CI_SHIFT      0
+#define FPAR_LP_PI   0x0003F000
+#define FPAR_LP_PI_SHIFT     12
+#define FPAR_LP_MS   0x00000800
+#define FPAR_LP_CI   0x000007FF
+#define FPAR_LP_CI_SHIFT      0
+	__be32 fbcr;            /**< Flash Byte Count Register */
+#define FBCR_BC      0x00000FFF
+	u8 res11[0x8];
+	u8 res8[0xF00];
+};
+
+extern struct fsl_lbc_regs __iomem *fsl_lbc_regs;
+extern spinlock_t fsl_lbc_lock;
+
+/*
+ * FSL UPM routines
+ */
+struct fsl_upm {
+	__be32 __iomem *mxmr;
+	int width;
+};
+
+extern int fsl_lbc_find(phys_addr_t addr_base);
+extern int fsl_upm_find(phys_addr_t addr_base, struct fsl_upm *upm);
+
+/**
+ * fsl_upm_start_pattern - start UPM patterns execution
+ * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
+ * @pat_offset:	UPM pattern offset for the command to be executed
+ *
+ * This routine programmes UPM so the next memory access that hits an UPM
+ * will trigger pattern execution, starting at pat_offset.
+ */
+static inline void fsl_upm_start_pattern(struct fsl_upm *upm, u8 pat_offset)
+{
+	clrsetbits_be32(upm->mxmr, MxMR_MAD, MxMR_OP_RP | pat_offset);
+}
+
+/**
+ * fsl_upm_end_pattern - end UPM patterns execution
+ * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
+ *
+ * This routine reverts UPM to normal operation mode.
+ */
+static inline void fsl_upm_end_pattern(struct fsl_upm *upm)
+{
+	clrbits32(upm->mxmr, MxMR_OP_RP);
+
+	while (in_be32(upm->mxmr) & MxMR_OP_RP)
+		cpu_relax();
+}
+
+/**
+ * fsl_upm_run_pattern - actually run an UPM pattern
+ * @upm:	pointer to the fsl_upm structure obtained via fsl_upm_find
+ * @io_base:	remapped pointer to where memory access should happen
+ * @mar:	MAR register content during pattern execution
+ *
+ * This function triggers dummy write to the memory specified by the io_base,
+ * thus UPM pattern actually executed. Note that mar usage depends on the
+ * pre-programmed AMX bits in the UPM RAM.
+ */
+static inline int fsl_upm_run_pattern(struct fsl_upm *upm,
+				      void __iomem *io_base, u32 mar)
+{
+	int ret = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&fsl_lbc_lock, flags);
+
+	out_be32(&fsl_lbc_regs->mar, mar << (32 - upm->width));
+
+	switch (upm->width) {
+	case 8:
+		out_8(io_base, 0x0);
+		break;
+	case 16:
+		out_be16(io_base, 0x0);
+		break;
+	case 32:
+		out_be32(io_base, 0x0);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock_irqrestore(&fsl_lbc_lock, flags);
+
+	return ret;
+}
+
+#endif /* __ASM_FSL_LBC_H */
diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h
new file mode 100644
index 000000000000..de921326cca8
--- /dev/null
+++ b/arch/powerpc/include/asm/ftrace.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_POWERPC_FTRACE
+#define _ASM_POWERPC_FTRACE
+
+#ifdef CONFIG_FTRACE
+#define MCOUNT_ADDR		((long)(_mcount))
+#define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void _mcount(void);
+#endif
+
+#endif
+
+#endif /* _ASM_POWERPC_FTRACE */
diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h
new file mode 100644
index 000000000000..6d406c5c5de4
--- /dev/null
+++ b/arch/powerpc/include/asm/futex.h
@@ -0,0 +1,117 @@
+#ifndef _ASM_POWERPC_FUTEX_H
+#define _ASM_POWERPC_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+#include <asm/synch.h>
+#include <asm/asm-compat.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+  __asm__ __volatile ( \
+	LWSYNC_ON_SMP \
+"1:	lwarx	%0,0,%2\n" \
+	insn \
+	PPC405_ERR77(0, %2) \
+"2:	stwcx.	%1,0,%2\n" \
+	"bne-	1b\n" \
+	"li	%1,0\n" \
+"3:	.section .fixup,\"ax\"\n" \
+"4:	li	%1,%3\n" \
+	"b	3b\n" \
+	".previous\n" \
+	".section __ex_table,\"a\"\n" \
+	".align 3\n" \
+	PPC_LONG "1b,4b,2b,4b\n" \
+	".previous" \
+	: "=&r" (oldval), "=&r" (ret) \
+	: "b" (uaddr), "i" (-EFAULT), "1" (oparg) \
+	: "cr0", "memory")
+
+static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_atomic_op("", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_atomic_op("add %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_atomic_op("or %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_atomic_op("andc %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_atomic_op("xor %1,%0,%1\n", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	int prev;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+        __asm__ __volatile__ (
+        LWSYNC_ON_SMP
+"1:     lwarx   %0,0,%2         # futex_atomic_cmpxchg_inatomic\n\
+        cmpw    0,%0,%3\n\
+        bne-    3f\n"
+        PPC405_ERR77(0,%2)
+"2:     stwcx.  %4,0,%2\n\
+        bne-    1b\n"
+        ISYNC_ON_SMP
+"3:	.section .fixup,\"ax\"\n\
+4:	li	%0,%5\n\
+	b	3b\n\
+	.previous\n\
+	.section __ex_table,\"a\"\n\
+	.align 3\n\
+	" PPC_LONG "1b,4b,2b,4b\n\
+	.previous" \
+        : "=&r" (prev), "+m" (*uaddr)
+        : "r" (uaddr), "r" (oldval), "r" (newval), "i" (-EFAULT)
+        : "cc", "memory");
+
+        return prev;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_FUTEX_H */
diff --git a/arch/powerpc/include/asm/gpio.h b/arch/powerpc/include/asm/gpio.h
new file mode 100644
index 000000000000..ea04632399d8
--- /dev/null
+++ b/arch/powerpc/include/asm/gpio.h
@@ -0,0 +1,56 @@
+/*
+ * Generic GPIO API implementation for PowerPC.
+ *
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __ASM_POWERPC_GPIO_H
+#define __ASM_POWERPC_GPIO_H
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+#ifdef CONFIG_GPIOLIB
+
+/*
+ * We don't (yet) implement inlined/rapid versions for on-chip gpios.
+ * Just call gpiolib.
+ */
+static inline int gpio_get_value(unsigned int gpio)
+{
+	return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned int gpio, int value)
+{
+	__gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned int gpio)
+{
+	return __gpio_cansleep(gpio);
+}
+
+/*
+ * Not implemented, yet.
+ */
+static inline int gpio_to_irq(unsigned int gpio)
+{
+	return -ENOSYS;
+}
+
+static inline int irq_to_gpio(unsigned int irq)
+{
+	return -EINVAL;
+}
+
+#endif /* CONFIG_GPIOLIB */
+
+#endif /* __ASM_POWERPC_GPIO_H */
diff --git a/arch/powerpc/include/asm/grackle.h b/arch/powerpc/include/asm/grackle.h
new file mode 100644
index 000000000000..bd7812a519d4
--- /dev/null
+++ b/arch/powerpc/include/asm/grackle.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_POWERPC_GRACKLE_H
+#define _ASM_POWERPC_GRACKLE_H
+#ifdef __KERNEL__
+/*
+ * Functions for setting up and using a MPC106 northbridge
+ */
+
+#include <asm/pci-bridge.h>
+
+extern void setup_grackle(struct pci_controller *hose);
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_GRACKLE_H */
diff --git a/arch/powerpc/include/asm/hardirq.h b/arch/powerpc/include/asm/hardirq.h
new file mode 100644
index 000000000000..288e14d53b7f
--- /dev/null
+++ b/arch/powerpc/include/asm/hardirq.h
@@ -0,0 +1,29 @@
+#ifndef _ASM_POWERPC_HARDIRQ_H
+#define _ASM_POWERPC_HARDIRQ_H
+#ifdef __KERNEL__
+
+#include <asm/irq.h>
+#include <asm/bug.h>
+
+/* The __last_jiffy_stamp field is needed to ensure that no decrementer
+ * interrupt is lost on SMP machines. Since on most CPUs it is in the same
+ * cache line as local_irq_count, it is cheap to access and is also used on UP
+ * for uniformity.
+ */
+typedef struct {
+	unsigned int __softirq_pending;	/* set_bit is used on this */
+	unsigned int __last_jiffy_stamp;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define last_jiffy_stamp(cpu) __IRQ_STAT((cpu), __last_jiffy_stamp)
+
+static inline void ack_bad_irq(int irq)
+{
+	printk(KERN_CRIT "illegal vector %d received!\n", irq);
+	BUG();
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_HARDIRQ_H */
diff --git a/arch/powerpc/include/asm/heathrow.h b/arch/powerpc/include/asm/heathrow.h
new file mode 100644
index 000000000000..93f54958a9d1
--- /dev/null
+++ b/arch/powerpc/include/asm/heathrow.h
@@ -0,0 +1,67 @@
+#ifndef _ASM_POWERPC_HEATHROW_H
+#define _ASM_POWERPC_HEATHROW_H
+#ifdef __KERNEL__
+/*
+ * heathrow.h: definitions for using the "Heathrow" I/O controller chip.
+ *
+ * Grabbed from Open Firmware definitions on a PowerBook G3 Series
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ */
+
+/* Front light color on Yikes/B&W G3. 32 bits */
+#define HEATHROW_FRONT_LIGHT		0x32 /* (set to 0 or 0xffffffff) */
+
+/* Brightness/contrast (gossamer iMac ?). 8 bits */
+#define HEATHROW_BRIGHTNESS_CNTL	0x32
+#define HEATHROW_CONTRAST_CNTL		0x33
+
+/* offset from ohare base for feature control register */
+#define HEATHROW_MBCR			0x34	/* Media bay control */
+#define HEATHROW_FCR			0x38	/* Feature control */
+#define HEATHROW_AUX_CNTL_REG		0x3c	/* Aux control */
+
+/*
+ * Bits in feature control register.
+ * Bits postfixed with a _N are in inverse logic
+ */
+#define HRW_SCC_TRANS_EN_N	0x00000001	/* Also controls modem power */
+#define HRW_BAY_POWER_N		0x00000002
+#define HRW_BAY_PCI_ENABLE	0x00000004
+#define HRW_BAY_IDE_ENABLE	0x00000008
+#define HRW_BAY_FLOPPY_ENABLE	0x00000010
+#define HRW_IDE0_ENABLE		0x00000020
+#define HRW_IDE0_RESET_N	0x00000040
+#define HRW_BAY_DEV_MASK	0x0000001c
+#define HRW_BAY_RESET_N		0x00000080
+#define HRW_IOBUS_ENABLE	0x00000100	/* Internal IDE ? */
+#define HRW_SCC_ENABLE		0x00000200
+#define HRW_MESH_ENABLE		0x00000400
+#define HRW_SWIM_ENABLE		0x00000800
+#define HRW_SOUND_POWER_N	0x00001000
+#define HRW_SOUND_CLK_ENABLE	0x00002000
+#define HRW_SCCA_IO		0x00004000
+#define HRW_SCCB_IO		0x00008000
+#define HRW_PORT_OR_DESK_VIA_N	0x00010000	/* This one is 0 on PowerBook */
+#define HRW_PWM_MON_ID_N	0x00020000	/* ??? (0) */
+#define HRW_HOOK_MB_CNT_N	0x00040000	/* ??? (0) */
+#define HRW_SWIM_CLONE_FLOPPY	0x00080000	/* ??? (0) */
+#define HRW_AUD_RUN22		0x00100000	/* ??? (1) */
+#define HRW_SCSI_LINK_MODE	0x00200000	/* Read ??? (1) */
+#define HRW_ARB_BYPASS		0x00400000	/* Disable internal PCI arbitrer */
+#define HRW_IDE1_RESET_N	0x00800000	/* Media bay */
+#define HRW_SLOW_SCC_PCLK	0x01000000	/* ??? (0) */
+#define HRW_RESET_SCC		0x02000000
+#define HRW_MFDC_CELL_ENABLE	0x04000000	/* ??? (0) */
+#define HRW_USE_MFDC		0x08000000	/* ??? (0) */
+#define HRW_BMAC_IO_ENABLE	0x60000000	/* two bits, not documented in OF */
+#define HRW_BMAC_RESET		0x80000000	/* not documented in OF */
+
+/* We OR those features at boot on desktop G3s */
+#define HRW_DEFAULTS		(HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE)
+
+/* Looks like Heathrow has some sort of GPIOs as well... */
+#define HRW_GPIO_MODEM_RESET	0x6d
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_HEATHROW_H */
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
new file mode 100644
index 000000000000..5d99b6489d56
--- /dev/null
+++ b/arch/powerpc/include/asm/highmem.h
@@ -0,0 +1,138 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * PowerPC version, stolen from the i386 version.
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/kmap_types.h>
+#include <asm/tlbflush.h>
+#include <asm/page.h>
+#include <asm/fixmap.h>
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.
+ */
+#define LAST_PKMAP 	(1 << PTE_SHIFT)
+#define LAST_PKMAP_MASK (LAST_PKMAP-1)
+#define PKMAP_BASE	((FIXADDR_START - PAGE_SIZE*(LAST_PKMAP + 1)) & PMD_MASK)
+#define PKMAP_NR(virt)  ((virt-PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+static inline void *kmap(struct page *page)
+{
+	might_sleep();
+	if (!PageHighMem(page))
+		return page_address(page);
+	return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+	BUG_ON(in_interrupt());
+	if (!PageHighMem(page))
+		return;
+	kunmap_high(page);
+}
+
+/*
+ * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap
+ * gives a more generic (and caching) interface. But kmap_atomic can
+ * be used in IRQ contexts, so in some (very limited) cases we need
+ * it.
+ */
+static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgprot_t prot)
+{
+	unsigned int idx;
+	unsigned long vaddr;
+
+	/* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */
+	pagefault_disable();
+	if (!PageHighMem(page))
+		return page_address(page);
+
+	idx = type + KM_TYPE_NR*smp_processor_id();
+	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
+#ifdef CONFIG_DEBUG_HIGHMEM
+	BUG_ON(!pte_none(*(kmap_pte-idx)));
+#endif
+	set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot));
+	flush_tlb_page(NULL, vaddr);
+
+	return (void*) vaddr;
+}
+
+static inline void *kmap_atomic(struct page *page, enum km_type type)
+{
+	return kmap_atomic_prot(page, type, kmap_prot);
+}
+
+static inline void kunmap_atomic(void *kvaddr, enum km_type type)
+{
+#ifdef CONFIG_DEBUG_HIGHMEM
+	unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK;
+	enum fixed_addresses idx = type + KM_TYPE_NR*smp_processor_id();
+
+	if (vaddr < __fix_to_virt(FIX_KMAP_END)) {
+		pagefault_enable();
+		return;
+	}
+
+	BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
+
+	/*
+	 * force other mappings to Oops if they'll try to access
+	 * this pte without first remap it
+	 */
+	pte_clear(&init_mm, vaddr, kmap_pte-idx);
+	flush_tlb_page(NULL, vaddr);
+#endif
+	pagefault_enable();
+}
+
+static inline struct page *kmap_atomic_to_page(void *ptr)
+{
+	unsigned long idx, vaddr = (unsigned long) ptr;
+	pte_t *pte;
+
+	if (vaddr < FIXADDR_START)
+		return virt_to_page(ptr);
+
+	idx = virt_to_fix(vaddr);
+	pte = kmap_pte - (idx - FIX_KMAP_BEGIN);
+	return pte_page(*pte);
+}
+
+#define flush_cache_kmaps()	flush_cache_all()
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/arch/powerpc/include/asm/hugetlb.h b/arch/powerpc/include/asm/hugetlb.h
new file mode 100644
index 000000000000..26f0d0ab27a5
--- /dev/null
+++ b/arch/powerpc/include/asm/hugetlb.h
@@ -0,0 +1,75 @@
+#ifndef _ASM_POWERPC_HUGETLB_H
+#define _ASM_POWERPC_HUGETLB_H
+
+#include <asm/page.h>
+
+
+int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
+			   unsigned long len);
+
+void hugetlb_free_pgd_range(struct mmu_gather *tlb, unsigned long addr,
+			    unsigned long end, unsigned long floor,
+			    unsigned long ceiling);
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t pte);
+
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep);
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
+{
+	struct hstate *h = hstate_file(file);
+	if (len & ~huge_page_mask(h))
+		return -EINVAL;
+	if (addr & ~huge_page_mask(h))
+		return -EINVAL;
+	return 0;
+}
+
+static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm)
+{
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	return pte_wrprotect(pte);
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+					     unsigned long addr, pte_t *ptep,
+					     pte_t pte, int dirty)
+{
+	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	return *ptep;
+}
+
+static inline int arch_prepare_hugepage(struct page *page)
+{
+	return 0;
+}
+
+static inline void arch_release_hugepage(struct page *page)
+{
+}
+
+#endif /* _ASM_POWERPC_HUGETLB_H */
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
new file mode 100644
index 000000000000..fbe2932fa9e9
--- /dev/null
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -0,0 +1,296 @@
+#ifndef _ASM_POWERPC_HVCALL_H
+#define _ASM_POWERPC_HVCALL_H
+#ifdef __KERNEL__
+
+#define HVSC			.long 0x44000022
+
+#define H_SUCCESS	0
+#define H_BUSY		1	/* Hardware busy -- retry later */
+#define H_CLOSED	2	/* Resource closed */
+#define H_NOT_AVAILABLE 3
+#define H_CONSTRAINED	4	/* Resource request constrained to max allowed */
+#define H_PARTIAL       5
+#define H_IN_PROGRESS	14	/* Kind of like busy */
+#define H_PAGE_REGISTERED 15
+#define H_PARTIAL_STORE   16
+#define H_PENDING	17	/* returned from H_POLL_PENDING */
+#define H_CONTINUE	18	/* Returned from H_Join on success */
+#define H_LONG_BUSY_START_RANGE		9900  /* Start of long busy range */
+#define H_LONG_BUSY_ORDER_1_MSEC	9900  /* Long busy, hint that 1msec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_MSEC	9901  /* Long busy, hint that 10msec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_MSEC 	9902  /* Long busy, hint that 100msec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_1_SEC		9903  /* Long busy, hint that 1sec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_10_SEC	9904  /* Long busy, hint that 10sec \
+						 is a good time to retry */
+#define H_LONG_BUSY_ORDER_100_SEC	9905  /* Long busy, hint that 100sec \
+						 is a good time to retry */
+#define H_LONG_BUSY_END_RANGE		9905  /* End of long busy range */
+#define H_HARDWARE	-1	/* Hardware error */
+#define H_FUNCTION	-2	/* Function not supported */
+#define H_PRIVILEGE	-3	/* Caller not privileged */
+#define H_PARAMETER	-4	/* Parameter invalid, out-of-range or conflicting */
+#define H_BAD_MODE	-5	/* Illegal msr value */
+#define H_PTEG_FULL	-6	/* PTEG is full */
+#define H_NOT_FOUND	-7	/* PTE was not found" */
+#define H_RESERVED_DABR	-8	/* DABR address is reserved by the hypervisor on this processor" */
+#define H_NO_MEM	-9
+#define H_AUTHORITY	-10
+#define H_PERMISSION	-11
+#define H_DROPPED	-12
+#define H_SOURCE_PARM	-13
+#define H_DEST_PARM	-14
+#define H_REMOTE_PARM	-15
+#define H_RESOURCE	-16
+#define H_ADAPTER_PARM  -17
+#define H_RH_PARM       -18
+#define H_RCQ_PARM      -19
+#define H_SCQ_PARM      -20
+#define H_EQ_PARM       -21
+#define H_RT_PARM       -22
+#define H_ST_PARM       -23
+#define H_SIGT_PARM     -24
+#define H_TOKEN_PARM    -25
+#define H_MLENGTH_PARM  -27
+#define H_MEM_PARM      -28
+#define H_MEM_ACCESS_PARM -29
+#define H_ATTR_PARM     -30
+#define H_PORT_PARM     -31
+#define H_MCG_PARM      -32
+#define H_VL_PARM       -33
+#define H_TSIZE_PARM    -34
+#define H_TRACE_PARM    -35
+
+#define H_MASK_PARM     -37
+#define H_MCG_FULL      -38
+#define H_ALIAS_EXIST   -39
+#define H_P_COUNTER     -40
+#define H_TABLE_FULL    -41
+#define H_ALT_TABLE     -42
+#define H_MR_CONDITION  -43
+#define H_NOT_ENOUGH_RESOURCES -44
+#define H_R_STATE       -45
+#define H_RESCINDEND    -46
+
+
+/* Long Busy is a condition that can be returned by the firmware
+ * when a call cannot be completed now, but the identical call
+ * should be retried later.  This prevents calls blocking in the
+ * firmware for long periods of time.  Annoyingly the firmware can return
+ * a range of return codes, hinting at how long we should wait before
+ * retrying.  If you don't care for the hint, the macro below is a good
+ * way to check for the long_busy return codes
+ */
+#define H_IS_LONG_BUSY(x)  ((x >= H_LONG_BUSY_START_RANGE) \
+			     && (x <= H_LONG_BUSY_END_RANGE))
+
+/* Flags */
+#define H_LARGE_PAGE		(1UL<<(63-16))
+#define H_EXACT			(1UL<<(63-24))	/* Use exact PTE or return H_PTEG_FULL */
+#define H_R_XLATE		(1UL<<(63-25))	/* include a valid logical page num in the pte if the valid bit is set */
+#define H_READ_4		(1UL<<(63-26))	/* Return 4 PTEs */
+#define H_PAGE_STATE_CHANGE	(1UL<<(63-28))
+#define H_PAGE_UNUSED		((1UL<<(63-29)) | (1UL<<(63-30)))
+#define H_PAGE_SET_UNUSED	(H_PAGE_STATE_CHANGE | H_PAGE_UNUSED)
+#define H_PAGE_SET_LOANED	(H_PAGE_SET_UNUSED | (1UL<<(63-31)))
+#define H_PAGE_SET_ACTIVE	H_PAGE_STATE_CHANGE
+#define H_AVPN			(1UL<<(63-32))	/* An avpn is provided as a sanity test */
+#define H_ANDCOND		(1UL<<(63-33))
+#define H_ICACHE_INVALIDATE	(1UL<<(63-40))	/* icbi, etc.  (ignored for IO pages) */
+#define H_ICACHE_SYNCHRONIZE	(1UL<<(63-41))	/* dcbst, icbi, etc (ignored for IO pages */
+#define H_ZERO_PAGE		(1UL<<(63-48))	/* zero the page before mapping (ignored for IO pages) */
+#define H_COPY_PAGE		(1UL<<(63-49))
+#define H_N			(1UL<<(63-61))
+#define H_PP1			(1UL<<(63-62))
+#define H_PP2			(1UL<<(63-63))
+
+/* VASI States */
+#define H_VASI_INVALID          0
+#define H_VASI_ENABLED          1
+#define H_VASI_ABORTED          2
+#define H_VASI_SUSPENDING       3
+#define H_VASI_SUSPENDED        4
+#define H_VASI_RESUMED          5
+#define H_VASI_COMPLETED        6
+
+/* DABRX flags */
+#define H_DABRX_HYPERVISOR	(1UL<<(63-61))
+#define H_DABRX_KERNEL		(1UL<<(63-62))
+#define H_DABRX_USER		(1UL<<(63-63))
+
+/* Each control block has to be on a 4K bondary */
+#define H_CB_ALIGNMENT          4096
+
+/* pSeries hypervisor opcodes */
+#define H_REMOVE		0x04
+#define H_ENTER			0x08
+#define H_READ			0x0c
+#define H_CLEAR_MOD		0x10
+#define H_CLEAR_REF		0x14
+#define H_PROTECT		0x18
+#define H_GET_TCE		0x1c
+#define H_PUT_TCE		0x20
+#define H_SET_SPRG0		0x24
+#define H_SET_DABR		0x28
+#define H_PAGE_INIT		0x2c
+#define H_SET_ASR		0x30
+#define H_ASR_ON		0x34
+#define H_ASR_OFF		0x38
+#define H_LOGICAL_CI_LOAD	0x3c
+#define H_LOGICAL_CI_STORE	0x40
+#define H_LOGICAL_CACHE_LOAD	0x44
+#define H_LOGICAL_CACHE_STORE	0x48
+#define H_LOGICAL_ICBI		0x4c
+#define H_LOGICAL_DCBF		0x50
+#define H_GET_TERM_CHAR		0x54
+#define H_PUT_TERM_CHAR		0x58
+#define H_REAL_TO_LOGICAL	0x5c
+#define H_HYPERVISOR_DATA	0x60
+#define H_EOI			0x64
+#define H_CPPR			0x68
+#define H_IPI			0x6c
+#define H_IPOLL			0x70
+#define H_XIRR			0x74
+#define H_PERFMON		0x7c
+#define H_MIGRATE_DMA		0x78
+#define H_REGISTER_VPA		0xDC
+#define H_CEDE			0xE0
+#define H_CONFER		0xE4
+#define H_PROD			0xE8
+#define H_GET_PPP		0xEC
+#define H_SET_PPP		0xF0
+#define H_PURR			0xF4
+#define H_PIC			0xF8
+#define H_REG_CRQ		0xFC
+#define H_FREE_CRQ		0x100
+#define H_VIO_SIGNAL		0x104
+#define H_SEND_CRQ		0x108
+#define H_COPY_RDMA		0x110
+#define H_REGISTER_LOGICAL_LAN	0x114
+#define H_FREE_LOGICAL_LAN	0x118
+#define H_ADD_LOGICAL_LAN_BUFFER 0x11C
+#define H_SEND_LOGICAL_LAN	0x120
+#define H_BULK_REMOVE		0x124
+#define H_MULTICAST_CTRL	0x130
+#define H_SET_XDABR		0x134
+#define H_STUFF_TCE		0x138
+#define H_PUT_TCE_INDIRECT	0x13C
+#define H_CHANGE_LOGICAL_LAN_MAC 0x14C
+#define H_VTERM_PARTNER_INFO	0x150
+#define H_REGISTER_VTERM	0x154
+#define H_FREE_VTERM		0x158
+#define H_RESET_EVENTS          0x15C
+#define H_ALLOC_RESOURCE        0x160
+#define H_FREE_RESOURCE         0x164
+#define H_MODIFY_QP             0x168
+#define H_QUERY_QP              0x16C
+#define H_REREGISTER_PMR        0x170
+#define H_REGISTER_SMR          0x174
+#define H_QUERY_MR              0x178
+#define H_QUERY_MW              0x17C
+#define H_QUERY_HCA             0x180
+#define H_QUERY_PORT            0x184
+#define H_MODIFY_PORT           0x188
+#define H_DEFINE_AQP1           0x18C
+#define H_GET_TRACE_BUFFER      0x190
+#define H_DEFINE_AQP0           0x194
+#define H_RESIZE_MR             0x198
+#define H_ATTACH_MCQP           0x19C
+#define H_DETACH_MCQP           0x1A0
+#define H_CREATE_RPT            0x1A4
+#define H_REMOVE_RPT            0x1A8
+#define H_REGISTER_RPAGES       0x1AC
+#define H_DISABLE_AND_GETC      0x1B0
+#define H_ERROR_DATA            0x1B4
+#define H_GET_HCA_INFO          0x1B8
+#define H_GET_PERF_COUNT        0x1BC
+#define H_MANAGE_TRACE          0x1C0
+#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4
+#define H_QUERY_INT_STATE       0x1E4
+#define H_POLL_PENDING		0x1D8
+#define H_ILLAN_ATTRIBUTES	0x244
+#define H_JOIN			0x298
+#define H_VASI_STATE            0x2A4
+#define H_ENABLE_CRQ		0x2B0
+#define H_SET_MPP		0x2D0
+#define H_GET_MPP		0x2D4
+#define MAX_HCALL_OPCODE	H_GET_MPP
+
+#ifndef __ASSEMBLY__
+
+/**
+ * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments
+ * @opcode: The hypervisor call to make.
+ *
+ * This call supports up to 7 arguments and only returns the status of
+ * the hcall. Use this version where possible, its slightly faster than
+ * the other plpar_hcalls.
+ */
+long plpar_hcall_norets(unsigned long opcode, ...);
+
+/**
+ * plpar_hcall: - Make a pseries hypervisor call
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 4 return arguments in.
+ *
+ * This call supports up to 6 arguments and 4 return arguments. Use
+ * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
+ *
+ * Used for all but the craziest of phyp interfaces (see plpar_hcall9)
+ */
+#define PLPAR_HCALL_BUFSIZE 4
+long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...);
+
+/**
+ * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 4 return arguments in.
+ *
+ * This call supports up to 6 arguments and 4 return arguments. Use
+ * PLPAR_HCALL_BUFSIZE to size the return argument buffer.
+ *
+ * Used when phyp interface needs to be called in real mode. Similar to
+ * plpar_hcall, but plpar_hcall_raw works in real mode and does not
+ * calculate hypervisor call statistics.
+ */
+long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...);
+
+/**
+ * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments
+ * @opcode: The hypervisor call to make.
+ * @retbuf: Buffer to store up to 9 return arguments in.
+ *
+ * This call supports up to 9 arguments and 9 return arguments. Use
+ * PLPAR_HCALL9_BUFSIZE to size the return argument buffer.
+ */
+#define PLPAR_HCALL9_BUFSIZE 9
+long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...);
+
+/* For hcall instrumentation.  One structure per-hcall, per-CPU */
+struct hcall_stats {
+	unsigned long	num_calls;	/* number of calls (on this CPU) */
+	unsigned long	tb_total;	/* total wall time (mftb) of calls. */
+	unsigned long	purr_total;	/* total cpu time (PURR) of calls. */
+};
+#define HCALL_STAT_ARRAY_SIZE	((MAX_HCALL_OPCODE >> 2) + 1)
+
+struct hvcall_mpp_data {
+	unsigned long entitled_mem;
+	unsigned long mapped_mem;
+	unsigned short group_num;
+	unsigned short pool_num;
+	unsigned char mem_weight;
+	unsigned char unallocated_mem_weight;
+	unsigned long unallocated_entitlement;  /* value in bytes */
+	unsigned long pool_size;
+	signed long loan_request;
+	unsigned long backing_mem;
+};
+
+int h_get_mpp(struct hvcall_mpp_data *);
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_HVCALL_H */
diff --git a/arch/powerpc/include/asm/hvconsole.h b/arch/powerpc/include/asm/hvconsole.h
new file mode 100644
index 000000000000..35ea69e8121f
--- /dev/null
+++ b/arch/powerpc/include/asm/hvconsole.h
@@ -0,0 +1,41 @@
+/*
+ * hvconsole.h
+ * Copyright (C) 2004 Ryan S Arnold, IBM Corporation
+ *
+ * LPAR console support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _PPC64_HVCONSOLE_H
+#define _PPC64_HVCONSOLE_H
+#ifdef __KERNEL__
+
+/*
+ * PSeries firmware will only send/recv up to 16 bytes of character data per
+ * hcall.
+ */
+#define MAX_VIO_PUT_CHARS	16
+#define SIZE_VIO_GET_CHARS	16
+
+/*
+ * Vio firmware always attempts to fetch MAX_VIO_GET_CHARS chars.  The 'count'
+ * parm is included to conform to put_chars() function pointer template
+ */
+extern int hvc_get_chars(uint32_t vtermno, char *buf, int count);
+extern int hvc_put_chars(uint32_t vtermno, const char *buf, int count);
+
+#endif /* __KERNEL__ */
+#endif /* _PPC64_HVCONSOLE_H */
diff --git a/arch/powerpc/include/asm/hvcserver.h b/arch/powerpc/include/asm/hvcserver.h
new file mode 100644
index 000000000000..67d7da3a4da4
--- /dev/null
+++ b/arch/powerpc/include/asm/hvcserver.h
@@ -0,0 +1,59 @@
+/*
+ * hvcserver.h
+ * Copyright (C) 2004 Ryan S Arnold, IBM Corporation
+ *
+ * PPC64 virtual I/O console server support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _PPC64_HVCSERVER_H
+#define _PPC64_HVCSERVER_H
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+
+/* Converged Location Code length */
+#define HVCS_CLC_LENGTH	79
+
+/**
+ * hvcs_partner_info - an element in a list of partner info
+ * @node: list_head denoting this partner_info struct's position in the list of
+ *	partner info.
+ * @unit_address: The partner unit address of this entry.
+ * @partition_ID: The partner partition ID of this entry.
+ * @location_code: The converged location code of this entry + 1 char for the
+ *	null-term.
+ *
+ * This structure outlines the format that partner info is presented to a caller
+ * of the hvcs partner info fetching functions.  These are strung together into
+ * a list using linux kernel lists.
+ */
+struct hvcs_partner_info {
+	struct list_head node;
+	uint32_t unit_address;
+	uint32_t partition_ID;
+	char location_code[HVCS_CLC_LENGTH + 1]; /* CLC + 1 null-term char */
+};
+
+extern int hvcs_free_partner_info(struct list_head *head);
+extern int hvcs_get_partner_info(uint32_t unit_address,
+		struct list_head *head, unsigned long *pi_buff);
+extern int hvcs_register_connection(uint32_t unit_address,
+		uint32_t p_partition_ID, uint32_t p_unit_address);
+extern int hvcs_free_connection(uint32_t unit_address);
+
+#endif /* __KERNEL__ */
+#endif /* _PPC64_HVCSERVER_H */
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
new file mode 100644
index 000000000000..f75a5fc64d2e
--- /dev/null
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ */
+#ifndef _ASM_POWERPC_HW_IRQ_H
+#define _ASM_POWERPC_HW_IRQ_H
+
+#ifdef __KERNEL__
+
+#include <linux/errno.h>
+#include <linux/compiler.h>
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+
+extern void timer_interrupt(struct pt_regs *);
+
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+
+static inline unsigned long local_get_flags(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__("lbz %0,%1(13)"
+	: "=r" (flags)
+	: "i" (offsetof(struct paca_struct, soft_enabled)));
+
+	return flags;
+}
+
+static inline unsigned long raw_local_irq_disable(void)
+{
+	unsigned long flags, zero;
+
+	__asm__ __volatile__("li %1,0; lbz %0,%2(13); stb %1,%2(13)"
+	: "=r" (flags), "=&r" (zero)
+	: "i" (offsetof(struct paca_struct, soft_enabled))
+	: "memory");
+
+	return flags;
+}
+
+extern void raw_local_irq_restore(unsigned long);
+extern void iseries_handle_interrupts(void);
+
+#define raw_local_irq_enable()		raw_local_irq_restore(1)
+#define raw_local_save_flags(flags)	((flags) = local_get_flags())
+#define raw_local_irq_save(flags)	((flags) = raw_local_irq_disable())
+
+#define raw_irqs_disabled()		(local_get_flags() == 0)
+#define raw_irqs_disabled_flags(flags)	((flags) == 0)
+
+#define __hard_irq_enable()	__mtmsrd(mfmsr() | MSR_EE, 1)
+#define __hard_irq_disable()	__mtmsrd(mfmsr() & ~MSR_EE, 1)
+
+#define  hard_irq_disable()			\
+	do {					\
+		__hard_irq_disable();		\
+		get_paca()->soft_enabled = 0;	\
+		get_paca()->hard_enabled = 0;	\
+	} while(0)
+
+static inline int irqs_disabled_flags(unsigned long flags)
+{
+	return flags == 0;
+}
+
+#else
+
+#if defined(CONFIG_BOOKE)
+#define SET_MSR_EE(x)	mtmsr(x)
+#define local_irq_restore(flags)	__asm__ __volatile__("wrtee %0" : : "r" (flags) : "memory")
+#else
+#define SET_MSR_EE(x)	mtmsr(x)
+#define local_irq_restore(flags)	mtmsr(flags)
+#endif
+
+static inline void local_irq_disable(void)
+{
+#ifdef CONFIG_BOOKE
+	__asm__ __volatile__("wrteei 0": : :"memory");
+#else
+	unsigned long msr;
+	__asm__ __volatile__("": : :"memory");
+	msr = mfmsr();
+	SET_MSR_EE(msr & ~MSR_EE);
+#endif
+}
+
+static inline void local_irq_enable(void)
+{
+#ifdef CONFIG_BOOKE
+	__asm__ __volatile__("wrteei 1": : :"memory");
+#else
+	unsigned long msr;
+	__asm__ __volatile__("": : :"memory");
+	msr = mfmsr();
+	SET_MSR_EE(msr | MSR_EE);
+#endif
+}
+
+static inline void local_irq_save_ptr(unsigned long *flags)
+{
+	unsigned long msr;
+	msr = mfmsr();
+	*flags = msr;
+#ifdef CONFIG_BOOKE
+	__asm__ __volatile__("wrteei 0": : :"memory");
+#else
+	SET_MSR_EE(msr & ~MSR_EE);
+#endif
+	__asm__ __volatile__("": : :"memory");
+}
+
+#define local_save_flags(flags)	((flags) = mfmsr())
+#define local_irq_save(flags)	local_irq_save_ptr(&flags)
+#define irqs_disabled()		((mfmsr() & MSR_EE) == 0)
+
+#define hard_irq_enable()	local_irq_enable()
+#define hard_irq_disable()	local_irq_disable()
+
+static inline int irqs_disabled_flags(unsigned long flags)
+{
+	return (flags & MSR_EE) == 0;
+}
+
+#endif /* CONFIG_PPC64 */
+
+/*
+ * interrupt-retrigger: should we handle this via lost interrupts and IPIs
+ * or should we not care like we do now ? --BenH.
+ */
+struct hw_interrupt_type;
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_HW_IRQ_H */
diff --git a/arch/powerpc/include/asm/hydra.h b/arch/powerpc/include/asm/hydra.h
new file mode 100644
index 000000000000..1ad4eed07fbe
--- /dev/null
+++ b/arch/powerpc/include/asm/hydra.h
@@ -0,0 +1,102 @@
+/*
+ *  include/asm-ppc/hydra.h -- Mac I/O `Hydra' definitions
+ *
+ *  Copyright (C) 1997 Geert Uytterhoeven
+ *
+ *  This file is based on the following documentation:
+ *
+ *	Macintosh Technology in the Common Hardware Reference Platform
+ *	Apple Computer, Inc.
+ *
+ *	© Copyright 1995 Apple Computer, Inc. All rights reserved.
+ *
+ *  It's available online from http://chrp.apple.com/MacTech.pdf.
+ *  You can obtain paper copies of this book from computer bookstores or by
+ *  writing Morgan Kaufmann Publishers, Inc., 340 Pine Street, Sixth Floor, San
+ *  Francisco, CA 94104. Reference ISBN 1-55860-393-X.
+ *
+ *  This file is subject to the terms and conditions of the GNU General Public
+ *  License.  See the file COPYING in the main directory of this archive
+ *  for more details.
+ */
+
+#ifndef _ASMPPC_HYDRA_H
+#define _ASMPPC_HYDRA_H
+
+#ifdef __KERNEL__
+
+struct Hydra {
+    /* DBDMA Controller Register Space */
+    char Pad1[0x30];
+    u_int CachePD;
+    u_int IDs;
+    u_int Feature_Control;
+    char Pad2[0x7fc4];
+    /* DBDMA Channel Register Space */
+    char SCSI_DMA[0x100];
+    char Pad3[0x300];
+    char SCCA_Tx_DMA[0x100];
+    char SCCA_Rx_DMA[0x100];
+    char SCCB_Tx_DMA[0x100];
+    char SCCB_Rx_DMA[0x100];
+    char Pad4[0x7800];
+    /* Device Register Space */
+    char SCSI[0x1000];
+    char ADB[0x1000];
+    char SCC_Legacy[0x1000];
+    char SCC[0x1000];
+    char Pad9[0x2000];
+    char VIA[0x2000];
+    char Pad10[0x28000];
+    char OpenPIC[0x40000];
+};
+
+extern volatile struct Hydra __iomem *Hydra;
+
+
+    /*
+     *  Feature Control Register
+     */
+
+#define HYDRA_FC_SCC_CELL_EN	0x00000001	/* Enable SCC Clock */
+#define HYDRA_FC_SCSI_CELL_EN	0x00000002	/* Enable SCSI Clock */
+#define HYDRA_FC_SCCA_ENABLE	0x00000004	/* Enable SCC A Lines */
+#define HYDRA_FC_SCCB_ENABLE	0x00000008	/* Enable SCC B Lines */
+#define HYDRA_FC_ARB_BYPASS	0x00000010	/* Bypass Internal Arbiter */
+#define HYDRA_FC_RESET_SCC	0x00000020	/* Reset SCC */
+#define HYDRA_FC_MPIC_ENABLE	0x00000040	/* Enable OpenPIC */
+#define HYDRA_FC_SLOW_SCC_PCLK	0x00000080	/* 1=15.6672, 0=25 MHz */
+#define HYDRA_FC_MPIC_IS_MASTER	0x00000100	/* OpenPIC Master Mode */
+
+
+    /*
+     *  OpenPIC Interrupt Sources
+     */
+
+#define HYDRA_INT_SIO		0
+#define HYDRA_INT_SCSI_DMA	1
+#define HYDRA_INT_SCCA_TX_DMA	2
+#define HYDRA_INT_SCCA_RX_DMA	3
+#define HYDRA_INT_SCCB_TX_DMA	4
+#define HYDRA_INT_SCCB_RX_DMA	5
+#define HYDRA_INT_SCSI		6
+#define HYDRA_INT_SCCA		7
+#define HYDRA_INT_SCCB		8
+#define HYDRA_INT_VIA		9
+#define HYDRA_INT_ADB		10
+#define HYDRA_INT_ADB_NMI	11
+#define HYDRA_INT_EXT1		12	/* PCI IRQW */
+#define HYDRA_INT_EXT2		13	/* PCI IRQX */
+#define HYDRA_INT_EXT3		14	/* PCI IRQY */
+#define HYDRA_INT_EXT4		15	/* PCI IRQZ */
+#define HYDRA_INT_EXT5		16	/* IDE Primay/Secondary */
+#define HYDRA_INT_EXT6		17	/* IDE Secondary */
+#define HYDRA_INT_EXT7		18	/* Power Off Request */
+#define HYDRA_INT_SPARE		19
+
+extern int hydra_init(void);
+extern void macio_adb_init(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASMPPC_HYDRA_H */
diff --git a/arch/powerpc/include/asm/i8259.h b/arch/powerpc/include/asm/i8259.h
new file mode 100644
index 000000000000..105ade297aad
--- /dev/null
+++ b/arch/powerpc/include/asm/i8259.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_POWERPC_I8259_H
+#define _ASM_POWERPC_I8259_H
+#ifdef __KERNEL__
+
+#include <linux/irq.h>
+
+extern void i8259_init(struct device_node *node, unsigned long intack_addr);
+extern unsigned int i8259_irq(void);
+extern struct irq_host *i8259_get_host(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_I8259_H */
diff --git a/arch/powerpc/include/asm/ibmebus.h b/arch/powerpc/include/asm/ibmebus.h
new file mode 100644
index 000000000000..1a9d9aea21fa
--- /dev/null
+++ b/arch/powerpc/include/asm/ibmebus.h
@@ -0,0 +1,60 @@
+/*
+ * IBM PowerPC eBus Infrastructure Support.
+ *
+ * Copyright (c) 2005 IBM Corporation
+ *  Joachim Fenkes <fenkes@de.ibm.com>
+ *  Heiko J Schick <schickhj@de.ibm.com>
+ *
+ * All rights reserved.
+ *
+ * This source code is distributed under a dual license of GPL v2.0 and OpenIB
+ * BSD.
+ *
+ * OpenIB BSD License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials
+ * provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+ * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _ASM_EBUS_H
+#define _ASM_EBUS_H
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+extern struct bus_type ibmebus_bus_type;
+
+int ibmebus_register_driver(struct of_platform_driver *drv);
+void ibmebus_unregister_driver(struct of_platform_driver *drv);
+
+int ibmebus_request_irq(u32 ist, irq_handler_t handler,
+			unsigned long irq_flags, const char *devname,
+			void *dev_id);
+void ibmebus_free_irq(u32 ist, void *dev_id);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_IBMEBUS_H */
diff --git a/arch/powerpc/include/asm/ide.h b/arch/powerpc/include/asm/ide.h
new file mode 100644
index 000000000000..048480e340f2
--- /dev/null
+++ b/arch/powerpc/include/asm/ide.h
@@ -0,0 +1,58 @@
+/*
+ *  Copyright (C) 1994-1996 Linus Torvalds & authors
+ *
+ *  This file contains the powerpc architecture specific IDE code.
+ */
+#ifndef _ASM_POWERPC_IDE_H
+#define _ASM_POWERPC_IDE_H
+
+#ifdef __KERNEL__
+
+#ifndef __powerpc64__
+#include <linux/sched.h>
+#include <asm/mpc8xx.h>
+#endif
+#include <asm/io.h>
+
+#define __ide_mm_insw(p, a, c)	readsw((void __iomem *)(p), (a), (c))
+#define __ide_mm_insl(p, a, c)	readsl((void __iomem *)(p), (a), (c))
+#define __ide_mm_outsw(p, a, c)	writesw((void __iomem *)(p), (a), (c))
+#define __ide_mm_outsl(p, a, c)	writesl((void __iomem *)(p), (a), (c))
+
+#ifndef  __powerpc64__
+#include <linux/ioport.h>
+
+/* FIXME: use ide_platform host driver */
+static __inline__ int ide_default_irq(unsigned long base)
+{
+#ifdef CONFIG_PPLUS
+	switch (base) {
+	case 0x1f0:	return 14;
+	case 0x170:	return 15;
+	}
+#endif
+	return 0;
+}
+
+/* FIXME: use ide_platform host driver */
+static __inline__ unsigned long ide_default_io_base(int index)
+{
+#ifdef CONFIG_PPLUS
+	switch (index) {
+	case 0:		return 0x1f0;
+	case 1:		return 0x170;
+	}
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_BLK_DEV_MPC8xx_IDE
+#define IDE_ARCH_ACK_INTR  1
+#define ide_ack_intr(hwif) ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1)
+#endif
+
+#endif /* __powerpc64__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_IDE_H */
diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h
new file mode 100644
index 000000000000..0f165e59c326
--- /dev/null
+++ b/arch/powerpc/include/asm/immap_86xx.h
@@ -0,0 +1,156 @@
+/**
+ * MPC86xx Internal Memory Map
+ *
+ * Authors: Jeff Brown
+ *          Timur Tabi <timur@freescale.com>
+ *
+ * Copyright 2004,2007 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * This header file defines structures for various 86xx SOC devices that are
+ * used by multiple source files.
+ */
+
+#ifndef __ASM_POWERPC_IMMAP_86XX_H__
+#define __ASM_POWERPC_IMMAP_86XX_H__
+#ifdef __KERNEL__
+
+/* Global Utility Registers */
+struct ccsr_guts {
+	__be32	porpllsr;	/* 0x.0000 - POR PLL Ratio Status Register */
+	__be32	porbmsr;	/* 0x.0004 - POR Boot Mode Status Register */
+	__be32	porimpscr;	/* 0x.0008 - POR I/O Impedance Status and Control Register */
+	__be32	pordevsr;	/* 0x.000c - POR I/O Device Status Register */
+	__be32	pordbgmsr;	/* 0x.0010 - POR Debug Mode Status Register */
+	u8	res1[0x20 - 0x14];
+	__be32	porcir;		/* 0x.0020 - POR Configuration Information Register */
+	u8	res2[0x30 - 0x24];
+	__be32	gpiocr;		/* 0x.0030 - GPIO Control Register */
+	u8	res3[0x40 - 0x34];
+	__be32	gpoutdr;	/* 0x.0040 - General-Purpose Output Data Register */
+	u8	res4[0x50 - 0x44];
+	__be32	gpindr;		/* 0x.0050 - General-Purpose Input Data Register */
+	u8	res5[0x60 - 0x54];
+	__be32	pmuxcr;		/* 0x.0060 - Alternate Function Signal Multiplex Control */
+	u8	res6[0x70 - 0x64];
+	__be32	devdisr;	/* 0x.0070 - Device Disable Control */
+	__be32	devdisr2;	/* 0x.0074 - Device Disable Control 2 */
+	u8	res7[0x80 - 0x78];
+	__be32	powmgtcsr;	/* 0x.0080 - Power Management Status and Control Register */
+	u8	res8[0x90 - 0x84];
+	__be32	mcpsumr;	/* 0x.0090 - Machine Check Summary Register */
+	__be32	rstrscr;	/* 0x.0094 - Reset Request Status and Control Register */
+	u8	res9[0xA0 - 0x98];
+	__be32	pvr;		/* 0x.00a0 - Processor Version Register */
+	__be32	svr;		/* 0x.00a4 - System Version Register */
+	u8	res10[0xB0 - 0xA8];
+	__be32	rstcr;		/* 0x.00b0 - Reset Control Register */
+	u8	res11[0xC0 - 0xB4];
+	__be32	elbcvselcr;	/* 0x.00c0 - eLBC Voltage Select Ctrl Reg */
+	u8	res12[0x800 - 0xC4];
+	__be32	clkdvdr;	/* 0x.0800 - Clock Divide Register */
+	u8	res13[0x900 - 0x804];
+	__be32	ircr;		/* 0x.0900 - Infrared Control Register */
+	u8	res14[0x908 - 0x904];
+	__be32	dmacr;		/* 0x.0908 - DMA Control Register */
+	u8	res15[0x914 - 0x90C];
+	__be32	elbccr;		/* 0x.0914 - eLBC Control Register */
+	u8	res16[0xB20 - 0x918];
+	__be32	ddr1clkdr;	/* 0x.0b20 - DDR1 Clock Disable Register */
+	__be32	ddr2clkdr;	/* 0x.0b24 - DDR2 Clock Disable Register */
+	__be32	ddrclkdr;	/* 0x.0b28 - DDR Clock Disable Register */
+	u8	res17[0xE00 - 0xB2C];
+	__be32	clkocr;		/* 0x.0e00 - Clock Out Select Register */
+	u8	res18[0xE10 - 0xE04];
+	__be32	ddrdllcr;	/* 0x.0e10 - DDR DLL Control Register */
+	u8	res19[0xE20 - 0xE14];
+	__be32	lbcdllcr;	/* 0x.0e20 - LBC DLL Control Register */
+	u8	res20[0xF04 - 0xE24];
+	__be32	srds1cr0;	/* 0x.0f04 - SerDes1 Control Register 0 */
+	__be32	srds1cr1;	/* 0x.0f08 - SerDes1 Control Register 0 */
+	u8	res21[0xF40 - 0xF0C];
+	__be32	srds2cr0;	/* 0x.0f40 - SerDes1 Control Register 0 */
+	__be32	srds2cr1;	/* 0x.0f44 - SerDes1 Control Register 0 */
+} __attribute__ ((packed));
+
+#define CCSR_GUTS_DMACR_DEV_SSI	0	/* DMA controller/channel set to SSI */
+#define CCSR_GUTS_DMACR_DEV_IR	1	/* DMA controller/channel set to IR */
+
+/*
+ * Set the DMACR register in the GUTS
+ *
+ * The DMACR register determines the source of initiated transfers for each
+ * channel on each DMA controller.  Rather than have a bunch of repetitive
+ * macros for the bit patterns, we just have a function that calculates
+ * them.
+ *
+ * guts: Pointer to GUTS structure
+ * co: The DMA controller (0 or 1)
+ * ch: The channel on the DMA controller (0, 1, 2, or 3)
+ * device: The device to set as the source (CCSR_GUTS_DMACR_DEV_xx)
+ */
+static inline void guts_set_dmacr(struct ccsr_guts __iomem *guts,
+	unsigned int co, unsigned int ch, unsigned int device)
+{
+	unsigned int shift = 16 + (8 * (1 - co) + 2 * (3 - ch));
+
+	clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift);
+}
+
+#define CCSR_GUTS_PMUXCR_LDPSEL		0x00010000
+#define CCSR_GUTS_PMUXCR_SSI1_MASK	0x0000C000	/* Bitmask for SSI1 */
+#define CCSR_GUTS_PMUXCR_SSI1_LA	0x00000000	/* Latched address */
+#define CCSR_GUTS_PMUXCR_SSI1_HI	0x00004000	/* High impedance */
+#define CCSR_GUTS_PMUXCR_SSI1_SSI	0x00008000	/* Used for SSI1 */
+#define CCSR_GUTS_PMUXCR_SSI2_MASK	0x00003000	/* Bitmask for SSI2 */
+#define CCSR_GUTS_PMUXCR_SSI2_LA	0x00000000	/* Latched address */
+#define CCSR_GUTS_PMUXCR_SSI2_HI	0x00001000	/* High impedance */
+#define CCSR_GUTS_PMUXCR_SSI2_SSI	0x00002000	/* Used for SSI2 */
+#define CCSR_GUTS_PMUXCR_LA_22_25_LA	0x00000000	/* Latched Address */
+#define CCSR_GUTS_PMUXCR_LA_22_25_HI	0x00000400	/* High impedance */
+#define CCSR_GUTS_PMUXCR_DBGDRV		0x00000200	/* Signals not driven */
+#define CCSR_GUTS_PMUXCR_DMA2_0		0x00000008
+#define CCSR_GUTS_PMUXCR_DMA2_3		0x00000004
+#define CCSR_GUTS_PMUXCR_DMA1_0		0x00000002
+#define CCSR_GUTS_PMUXCR_DMA1_3		0x00000001
+
+/*
+ * Set the DMA external control bits in the GUTS
+ *
+ * The DMA external control bits in the PMUXCR are only meaningful for
+ * channels 0 and 3.  Any other channels are ignored.
+ *
+ * guts: Pointer to GUTS structure
+ * co: The DMA controller (0 or 1)
+ * ch: The channel on the DMA controller (0, 1, 2, or 3)
+ * value: the new value for the bit (0 or 1)
+ */
+static inline void guts_set_pmuxcr_dma(struct ccsr_guts __iomem *guts,
+	unsigned int co, unsigned int ch, unsigned int value)
+{
+	if ((ch == 0) || (ch == 3)) {
+		unsigned int shift = 2 * (co + 1) - (ch & 1) - 1;
+
+		clrsetbits_be32(&guts->pmuxcr, 1 << shift, value << shift);
+	}
+}
+
+#define CCSR_GUTS_CLKDVDR_PXCKEN	0x80000000
+#define CCSR_GUTS_CLKDVDR_SSICKEN	0x20000000
+#define CCSR_GUTS_CLKDVDR_PXCKINV	0x10000000
+#define CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT 25
+#define CCSR_GUTS_CLKDVDR_PXCKDLY_MASK	0x06000000
+#define CCSR_GUTS_CLKDVDR_PXCKDLY(x) \
+	(((x) & 3) << CCSR_GUTS_CLKDVDR_PXCKDLY_SHIFT)
+#define CCSR_GUTS_CLKDVDR_PXCLK_SHIFT	16
+#define CCSR_GUTS_CLKDVDR_PXCLK_MASK	0x001F0000
+#define CCSR_GUTS_CLKDVDR_PXCLK(x) (((x) & 31) << CCSR_GUTS_CLKDVDR_PXCLK_SHIFT)
+#define CCSR_GUTS_CLKDVDR_SSICLK_MASK	0x000000FF
+#define CCSR_GUTS_CLKDVDR_SSICLK(x) ((x) & CCSR_GUTS_CLKDVDR_SSICLK_MASK)
+
+#endif /* __ASM_POWERPC_IMMAP_86XX_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/immap_cpm2.h b/arch/powerpc/include/asm/immap_cpm2.h
new file mode 100644
index 000000000000..4080bab0468c
--- /dev/null
+++ b/arch/powerpc/include/asm/immap_cpm2.h
@@ -0,0 +1,650 @@
+/*
+ * CPM2 Internal Memory Map
+ * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
+ *
+ * The Internal Memory Map for devices with CPM2 on them.  This
+ * is the superset of all CPM2 devices (8260, 8266, 8280, 8272,
+ * 8560).
+ */
+#ifdef __KERNEL__
+#ifndef __IMMAP_CPM2__
+#define __IMMAP_CPM2__
+
+#include <linux/types.h>
+
+/* System configuration registers.
+*/
+typedef	struct sys_82xx_conf {
+	u32	sc_siumcr;
+	u32	sc_sypcr;
+	u8	res1[6];
+	u16	sc_swsr;
+	u8	res2[20];
+	u32	sc_bcr;
+	u8	sc_ppc_acr;
+	u8	res3[3];
+	u32	sc_ppc_alrh;
+	u32	sc_ppc_alrl;
+	u8	sc_lcl_acr;
+	u8	res4[3];
+	u32	sc_lcl_alrh;
+	u32	sc_lcl_alrl;
+	u32	sc_tescr1;
+	u32	sc_tescr2;
+	u32	sc_ltescr1;
+	u32	sc_ltescr2;
+	u32	sc_pdtea;
+	u8	sc_pdtem;
+	u8	res5[3];
+	u32	sc_ldtea;
+	u8	sc_ldtem;
+	u8	res6[163];
+} sysconf_82xx_cpm2_t;
+
+typedef	struct sys_85xx_conf {
+	u32	sc_cear;
+	u16	sc_ceer;
+	u16	sc_cemr;
+	u8	res1[70];
+	u32	sc_smaer;
+	u8	res2[4];
+	u32	sc_smevr;
+	u32	sc_smctr;
+	u32	sc_lmaer;
+	u8	res3[4];
+	u32	sc_lmevr;
+	u32	sc_lmctr;
+	u8	res4[144];
+} sysconf_85xx_cpm2_t;
+
+typedef union sys_conf {
+	sysconf_82xx_cpm2_t	siu_82xx;
+	sysconf_85xx_cpm2_t	siu_85xx;
+} sysconf_cpm2_t;
+
+
+
+/* Memory controller registers.
+*/
+typedef struct	mem_ctlr {
+	u32	memc_br0;
+	u32	memc_or0;
+	u32	memc_br1;
+	u32	memc_or1;
+	u32	memc_br2;
+	u32	memc_or2;
+	u32	memc_br3;
+	u32	memc_or3;
+	u32	memc_br4;
+	u32	memc_or4;
+	u32	memc_br5;
+	u32	memc_or5;
+	u32	memc_br6;
+	u32	memc_or6;
+	u32	memc_br7;
+	u32	memc_or7;
+	u32	memc_br8;
+	u32	memc_or8;
+	u32	memc_br9;
+	u32	memc_or9;
+	u32	memc_br10;
+	u32	memc_or10;
+	u32	memc_br11;
+	u32	memc_or11;
+	u8	res1[8];
+	u32	memc_mar;
+	u8	res2[4];
+	u32	memc_mamr;
+	u32	memc_mbmr;
+	u32	memc_mcmr;
+	u8	res3[8];
+	u16	memc_mptpr;
+	u8	res4[2];
+	u32	memc_mdr;
+	u8	res5[4];
+	u32	memc_psdmr;
+	u32	memc_lsdmr;
+	u8	memc_purt;
+	u8	res6[3];
+	u8	memc_psrt;
+	u8	res7[3];
+	u8	memc_lurt;
+	u8	res8[3];
+	u8	memc_lsrt;
+	u8	res9[3];
+	u32	memc_immr;
+	u32	memc_pcibr0;
+	u32	memc_pcibr1;
+	u8	res10[16];
+	u32	memc_pcimsk0;
+	u32	memc_pcimsk1;
+	u8	res11[52];
+} memctl_cpm2_t;
+
+/* System Integration Timers.
+*/
+typedef struct	sys_int_timers {
+	u8	res1[32];
+	u16	sit_tmcntsc;
+	u8	res2[2];
+	u32	sit_tmcnt;
+	u8	res3[4];
+	u32	sit_tmcntal;
+	u8	res4[16];
+	u16	sit_piscr;
+	u8	res5[2];
+	u32	sit_pitc;
+	u32	sit_pitr;
+	u8      res6[94];
+	u8	res7[390];
+} sit_cpm2_t;
+
+#define PISCR_PIRQ_MASK		((u16)0xff00)
+#define PISCR_PS		((u16)0x0080)
+#define PISCR_PIE		((u16)0x0004)
+#define PISCR_PTF		((u16)0x0002)
+#define PISCR_PTE		((u16)0x0001)
+
+/* PCI Controller.
+*/
+typedef struct pci_ctlr {
+	u32	pci_omisr;
+	u32	pci_omimr;
+	u8	res1[8];
+	u32	pci_ifqpr;
+	u32	pci_ofqpr;
+	u8	res2[8];
+	u32	pci_imr0;
+	u32	pci_imr1;
+	u32	pci_omr0;
+	u32	pci_omr1;
+	u32	pci_odr;
+	u8	res3[4];
+	u32	pci_idr;
+	u8	res4[20];
+	u32	pci_imisr;
+	u32	pci_imimr;
+	u8	res5[24];
+	u32	pci_ifhpr;
+	u8	res6[4];
+	u32	pci_iftpr;
+	u8	res7[4];
+	u32	pci_iphpr;
+	u8	res8[4];
+	u32	pci_iptpr;
+	u8	res9[4];
+	u32	pci_ofhpr;
+	u8	res10[4];
+	u32	pci_oftpr;
+	u8	res11[4];
+	u32	pci_ophpr;
+	u8	res12[4];
+	u32	pci_optpr;
+	u8	res13[8];
+	u32	pci_mucr;
+	u8	res14[8];
+	u32	pci_qbar;
+	u8	res15[12];
+	u32	pci_dmamr0;
+	u32	pci_dmasr0;
+	u32	pci_dmacdar0;
+	u8	res16[4];
+	u32	pci_dmasar0;
+	u8	res17[4];
+	u32	pci_dmadar0;
+	u8	res18[4];
+	u32	pci_dmabcr0;
+	u32	pci_dmandar0;
+	u8	res19[86];
+	u32	pci_dmamr1;
+	u32	pci_dmasr1;
+	u32	pci_dmacdar1;
+	u8	res20[4];
+	u32	pci_dmasar1;
+	u8	res21[4];
+	u32	pci_dmadar1;
+	u8	res22[4];
+	u32	pci_dmabcr1;
+	u32	pci_dmandar1;
+	u8	res23[88];
+	u32	pci_dmamr2;
+	u32	pci_dmasr2;
+	u32	pci_dmacdar2;
+	u8	res24[4];
+	u32	pci_dmasar2;
+	u8	res25[4];
+	u32	pci_dmadar2;
+	u8	res26[4];
+	u32	pci_dmabcr2;
+	u32	pci_dmandar2;
+	u8	res27[88];
+	u32	pci_dmamr3;
+	u32	pci_dmasr3;
+	u32	pci_dmacdar3;
+	u8	res28[4];
+	u32	pci_dmasar3;
+	u8	res29[4];
+	u32	pci_dmadar3;
+	u8	res30[4];
+	u32	pci_dmabcr3;
+	u32	pci_dmandar3;
+	u8	res31[344];
+	u32	pci_potar0;
+	u8	res32[4];
+	u32	pci_pobar0;
+	u8	res33[4];
+	u32	pci_pocmr0;
+	u8	res34[4];
+	u32	pci_potar1;
+	u8	res35[4];
+	u32	pci_pobar1;
+	u8	res36[4];
+	u32	pci_pocmr1;
+	u8	res37[4];
+	u32	pci_potar2;
+	u8	res38[4];
+	u32	pci_pobar2;
+	u8	res39[4];
+	u32	pci_pocmr2;
+	u8	res40[50];
+	u32	pci_ptcr;
+	u32	pci_gpcr;
+	u32	pci_gcr;
+	u32	pci_esr;
+	u32	pci_emr;
+	u32	pci_ecr;
+	u32	pci_eacr;
+	u8	res41[4];
+	u32	pci_edcr;
+	u8	res42[4];
+	u32	pci_eccr;
+	u8	res43[44];
+	u32	pci_pitar1;
+	u8	res44[4];
+	u32	pci_pibar1;
+	u8	res45[4];
+	u32	pci_picmr1;
+	u8	res46[4];
+	u32	pci_pitar0;
+	u8	res47[4];
+	u32	pci_pibar0;
+	u8	res48[4];
+	u32	pci_picmr0;
+	u8	res49[4];
+	u32	pci_cfg_addr;
+	u32	pci_cfg_data;
+	u32	pci_int_ack;
+	u8	res50[756];
+} pci_cpm2_t;
+
+/* Interrupt Controller.
+*/
+typedef struct interrupt_controller {
+	u16	ic_sicr;
+	u8	res1[2];
+	u32	ic_sivec;
+	u32	ic_sipnrh;
+	u32	ic_sipnrl;
+	u32	ic_siprr;
+	u32	ic_scprrh;
+	u32	ic_scprrl;
+	u32	ic_simrh;
+	u32	ic_simrl;
+	u32	ic_siexr;
+	u8	res2[88];
+} intctl_cpm2_t;
+
+/* Clocks and Reset.
+*/
+typedef struct clk_and_reset {
+	u32	car_sccr;
+	u8	res1[4];
+	u32	car_scmr;
+	u8	res2[4];
+	u32	car_rsr;
+	u32	car_rmr;
+	u8	res[104];
+} car_cpm2_t;
+
+/* Input/Output Port control/status registers.
+ * Names consistent with processor manual, although they are different
+ * from the original 8xx names.......
+ */
+typedef struct io_port {
+	u32	iop_pdira;
+	u32	iop_ppara;
+	u32	iop_psora;
+	u32	iop_podra;
+	u32	iop_pdata;
+	u8	res1[12];
+	u32	iop_pdirb;
+	u32	iop_pparb;
+	u32	iop_psorb;
+	u32	iop_podrb;
+	u32	iop_pdatb;
+	u8	res2[12];
+	u32	iop_pdirc;
+	u32	iop_pparc;
+	u32	iop_psorc;
+	u32	iop_podrc;
+	u32	iop_pdatc;
+	u8	res3[12];
+	u32	iop_pdird;
+	u32	iop_ppard;
+	u32	iop_psord;
+	u32	iop_podrd;
+	u32	iop_pdatd;
+	u8	res4[12];
+} iop_cpm2_t;
+
+/* Communication Processor Module Timers
+*/
+typedef struct cpm_timers {
+	u8	cpmt_tgcr1;
+	u8	res1[3];
+	u8	cpmt_tgcr2;
+	u8	res2[11];
+	u16	cpmt_tmr1;
+	u16	cpmt_tmr2;
+	u16	cpmt_trr1;
+	u16	cpmt_trr2;
+	u16	cpmt_tcr1;
+	u16	cpmt_tcr2;
+	u16	cpmt_tcn1;
+	u16	cpmt_tcn2;
+	u16	cpmt_tmr3;
+	u16	cpmt_tmr4;
+	u16	cpmt_trr3;
+	u16	cpmt_trr4;
+	u16	cpmt_tcr3;
+	u16	cpmt_tcr4;
+	u16	cpmt_tcn3;
+	u16	cpmt_tcn4;
+	u16	cpmt_ter1;
+	u16	cpmt_ter2;
+	u16	cpmt_ter3;
+	u16	cpmt_ter4;
+	u8	res3[584];
+} cpmtimer_cpm2_t;
+
+/* DMA control/status registers.
+*/
+typedef struct sdma_csr {
+	u8	res0[24];
+	u8	sdma_sdsr;
+	u8	res1[3];
+	u8	sdma_sdmr;
+	u8	res2[3];
+	u8	sdma_idsr1;
+	u8	res3[3];
+	u8	sdma_idmr1;
+	u8	res4[3];
+	u8	sdma_idsr2;
+	u8	res5[3];
+	u8	sdma_idmr2;
+	u8	res6[3];
+	u8	sdma_idsr3;
+	u8	res7[3];
+	u8	sdma_idmr3;
+	u8	res8[3];
+	u8	sdma_idsr4;
+	u8	res9[3];
+	u8	sdma_idmr4;
+	u8	res10[707];
+} sdma_cpm2_t;
+
+/* Fast controllers
+*/
+typedef struct fcc {
+	u32	fcc_gfmr;
+	u32	fcc_fpsmr;
+	u16	fcc_ftodr;
+	u8	res1[2];
+	u16	fcc_fdsr;
+	u8	res2[2];
+	u16	fcc_fcce;
+	u8	res3[2];
+	u16	fcc_fccm;
+	u8	res4[2];
+	u8	fcc_fccs;
+	u8	res5[3];
+	u8	fcc_ftirr_phy[4];
+} fcc_t;
+
+/* Fast controllers continued
+ */
+typedef struct fcc_c {
+	u32	fcc_firper;
+	u32	fcc_firer;
+	u32	fcc_firsr_hi;
+	u32	fcc_firsr_lo;
+	u8	fcc_gfemr;
+	u8	res1[15];
+} fcc_c_t;
+
+/* TC Layer
+ */
+typedef struct tclayer {
+	u16	tc_tcmode;
+	u16	tc_cdsmr;
+	u16	tc_tcer;
+	u16	tc_rcc;
+	u16	tc_tcmr;
+	u16	tc_fcc;
+	u16	tc_ccc;
+	u16	tc_icc;
+	u16	tc_tcc;
+	u16	tc_ecc;
+	u8	res1[12];
+} tclayer_t;
+
+
+/* I2C
+*/
+typedef struct i2c {
+	u8	i2c_i2mod;
+	u8	res1[3];
+	u8	i2c_i2add;
+	u8	res2[3];
+	u8	i2c_i2brg;
+	u8	res3[3];
+	u8	i2c_i2com;
+	u8	res4[3];
+	u8	i2c_i2cer;
+	u8	res5[3];
+	u8	i2c_i2cmr;
+	u8	res6[331];
+} i2c_cpm2_t;
+
+typedef struct scc {		/* Serial communication channels */
+	u32	scc_gsmrl;
+	u32	scc_gsmrh;
+	u16	scc_psmr;
+	u8	res1[2];
+	u16	scc_todr;
+	u16	scc_dsr;
+	u16	scc_scce;
+	u8	res2[2];
+	u16	scc_sccm;
+	u8	res3;
+	u8	scc_sccs;
+	u8	res4[8];
+} scc_t;
+
+typedef struct smc {		/* Serial management channels */
+	u8	res1[2];
+	u16	smc_smcmr;
+	u8	res2[2];
+	u8	smc_smce;
+	u8	res3[3];
+	u8	smc_smcm;
+	u8	res4[5];
+} smc_t;
+
+/* Serial Peripheral Interface.
+*/
+typedef struct spi_ctrl {
+	u16	spi_spmode;
+	u8	res1[4];
+	u8	spi_spie;
+	u8	res2[3];
+	u8	spi_spim;
+	u8	res3[2];
+	u8	spi_spcom;
+	u8	res4[82];
+} spictl_cpm2_t;
+
+/* CPM Mux.
+*/
+typedef struct cpmux {
+	u8	cmx_si1cr;
+	u8	res1;
+	u8	cmx_si2cr;
+	u8	res2;
+	u32	cmx_fcr;
+	u32	cmx_scr;
+	u8	cmx_smr;
+	u8	res3;
+	u16	cmx_uar;
+	u8	res4[16];
+} cpmux_t;
+
+/* SIRAM control
+*/
+typedef struct siram {
+	u16	si_amr;
+	u16	si_bmr;
+	u16	si_cmr;
+	u16	si_dmr;
+	u8	si_gmr;
+	u8	res1;
+	u8	si_cmdr;
+	u8	res2;
+	u8	si_str;
+	u8	res3;
+	u16	si_rsr;
+} siramctl_t;
+
+typedef struct mcc {
+	u16	mcc_mcce;
+	u8	res1[2];
+	u16	mcc_mccm;
+	u8	res2[2];
+	u8	mcc_mccf;
+	u8	res3[7];
+} mcc_t;
+
+typedef struct comm_proc {
+	u32	cp_cpcr;
+	u32	cp_rccr;
+	u8	res1[14];
+	u16	cp_rter;
+	u8	res2[2];
+	u16	cp_rtmr;
+	u16	cp_rtscr;
+	u8	res3[2];
+	u32	cp_rtsr;
+	u8	res4[12];
+} cpm_cpm2_t;
+
+/* USB Controller.
+*/
+typedef struct usb_ctlr {
+	u8	usb_usmod;
+	u8	usb_usadr;
+	u8	usb_uscom;
+	u8	res1[1];
+	u16	usb_usep1;
+	u16	usb_usep2;
+	u16	usb_usep3;
+	u16	usb_usep4;
+	u8	res2[4];
+	u16	usb_usber;
+	u8	res3[2];
+	u16	usb_usbmr;
+	u8	usb_usbs;
+	u8	res4[7];
+} usb_cpm2_t;
+
+/* ...and the whole thing wrapped up....
+*/
+
+typedef struct immap {
+	/* Some references are into the unique and known dpram spaces,
+	 * others are from the generic base.
+	 */
+#define im_dprambase	im_dpram1
+	u8		im_dpram1[16*1024];
+	u8		res1[16*1024];
+	u8		im_dpram2[4*1024];
+	u8		res2[8*1024];
+	u8		im_dpram3[4*1024];
+	u8		res3[16*1024];
+
+	sysconf_cpm2_t	im_siu_conf;	/* SIU Configuration */
+	memctl_cpm2_t	im_memctl;	/* Memory Controller */
+	sit_cpm2_t	im_sit;		/* System Integration Timers */
+	pci_cpm2_t	im_pci;		/* PCI Controller */
+	intctl_cpm2_t	im_intctl;	/* Interrupt Controller */
+	car_cpm2_t	im_clkrst;	/* Clocks and reset */
+	iop_cpm2_t	im_ioport;	/* IO Port control/status */
+	cpmtimer_cpm2_t	im_cpmtimer;	/* CPM timers */
+	sdma_cpm2_t	im_sdma;	/* SDMA control/status */
+
+	fcc_t		im_fcc[3];	/* Three FCCs */
+	u8		res4z[32];
+	fcc_c_t		im_fcc_c[3];	/* Continued FCCs */
+
+	u8		res4[32];
+
+	tclayer_t	im_tclayer[8];	/* Eight TCLayers */
+	u16		tc_tcgsr;
+	u16		tc_tcger;
+
+	/* First set of baud rate generators.
+	*/
+	u8		res[236];
+	u32		im_brgc5;
+	u32		im_brgc6;
+	u32		im_brgc7;
+	u32		im_brgc8;
+
+	u8		res5[608];
+
+	i2c_cpm2_t	im_i2c;		/* I2C control/status */
+	cpm_cpm2_t	im_cpm;		/* Communication processor */
+
+	/* Second set of baud rate generators.
+	*/
+	u32		im_brgc1;
+	u32		im_brgc2;
+	u32		im_brgc3;
+	u32		im_brgc4;
+
+	scc_t		im_scc[4];	/* Four SCCs */
+	smc_t		im_smc[2];	/* Couple of SMCs */
+	spictl_cpm2_t	im_spi;		/* A SPI */
+	cpmux_t		im_cpmux;	/* CPM clock route mux */
+	siramctl_t	im_siramctl1;	/* First SI RAM Control */
+	mcc_t		im_mcc1;	/* First MCC */
+	siramctl_t	im_siramctl2;	/* Second SI RAM Control */
+	mcc_t		im_mcc2;	/* Second MCC */
+	usb_cpm2_t	im_usb;		/* USB Controller */
+
+	u8		res6[1153];
+
+	u16		im_si1txram[256];
+	u8		res7[512];
+	u16		im_si1rxram[256];
+	u8		res8[512];
+	u16		im_si2txram[256];
+	u8		res9[512];
+	u16		im_si2rxram[256];
+	u8		res10[512];
+	u8		res11[4096];
+} cpm2_map_t;
+
+extern cpm2_map_t __iomem *cpm2_immr;
+
+#endif /* __IMMAP_CPM2__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h
new file mode 100644
index 000000000000..3c2fced3ac22
--- /dev/null
+++ b/arch/powerpc/include/asm/immap_qe.h
@@ -0,0 +1,483 @@
+/*
+ * QUICC Engine (QE) Internal Memory Map.
+ * The Internal Memory Map for devices with QE on them. This
+ * is the superset of all QE devices (8360, etc.).
+
+ * Copyright (C) 2006. Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_IMMAP_QE_H
+#define _ASM_POWERPC_IMMAP_QE_H
+#ifdef __KERNEL__
+
+#include <linux/kernel.h>
+#include <asm/io.h>
+
+#define QE_IMMAP_SIZE	(1024 * 1024)	/* 1MB from 1MB+IMMR */
+
+/* QE I-RAM */
+struct qe_iram {
+	__be32	iadd;		/* I-RAM Address Register */
+	__be32	idata;		/* I-RAM Data Register */
+	u8	res0[0x78];
+} __attribute__ ((packed));
+
+/* QE Interrupt Controller */
+struct qe_ic_regs {
+	__be32	qicr;
+	__be32	qivec;
+	__be32	qripnr;
+	__be32	qipnr;
+	__be32	qipxcc;
+	__be32	qipycc;
+	__be32	qipwcc;
+	__be32	qipzcc;
+	__be32	qimr;
+	__be32	qrimr;
+	__be32	qicnr;
+	u8	res0[0x4];
+	__be32	qiprta;
+	__be32	qiprtb;
+	u8	res1[0x4];
+	__be32	qricr;
+	u8	res2[0x20];
+	__be32	qhivec;
+	u8	res3[0x1C];
+} __attribute__ ((packed));
+
+/* Communications Processor */
+struct cp_qe {
+	__be32	cecr;		/* QE command register */
+	__be32	ceccr;		/* QE controller configuration register */
+	__be32	cecdr;		/* QE command data register */
+	u8	res0[0xA];
+	__be16	ceter;		/* QE timer event register */
+	u8	res1[0x2];
+	__be16	cetmr;		/* QE timers mask register */
+	__be32	cetscr;		/* QE time-stamp timer control register */
+	__be32	cetsr1;		/* QE time-stamp register 1 */
+	__be32	cetsr2;		/* QE time-stamp register 2 */
+	u8	res2[0x8];
+	__be32	cevter;		/* QE virtual tasks event register */
+	__be32	cevtmr;		/* QE virtual tasks mask register */
+	__be16	cercr;		/* QE RAM control register */
+	u8	res3[0x2];
+	u8	res4[0x24];
+	__be16	ceexe1;		/* QE external request 1 event register */
+	u8	res5[0x2];
+	__be16	ceexm1;		/* QE external request 1 mask register */
+	u8	res6[0x2];
+	__be16	ceexe2;		/* QE external request 2 event register */
+	u8	res7[0x2];
+	__be16	ceexm2;		/* QE external request 2 mask register */
+	u8	res8[0x2];
+	__be16	ceexe3;		/* QE external request 3 event register */
+	u8	res9[0x2];
+	__be16	ceexm3;		/* QE external request 3 mask register */
+	u8	res10[0x2];
+	__be16	ceexe4;		/* QE external request 4 event register */
+	u8	res11[0x2];
+	__be16	ceexm4;		/* QE external request 4 mask register */
+	u8	res12[0x3A];
+	__be32	ceurnr;		/* QE microcode revision number register */
+	u8	res13[0x244];
+} __attribute__ ((packed));
+
+/* QE Multiplexer */
+struct qe_mux {
+	__be32	cmxgcr;		/* CMX general clock route register */
+	__be32	cmxsi1cr_l;	/* CMX SI1 clock route low register */
+	__be32	cmxsi1cr_h;	/* CMX SI1 clock route high register */
+	__be32	cmxsi1syr;	/* CMX SI1 SYNC route register */
+	__be32	cmxucr[4];	/* CMX UCCx clock route registers */
+	__be32	cmxupcr;	/* CMX UPC clock route register */
+	u8	res0[0x1C];
+} __attribute__ ((packed));
+
+/* QE Timers */
+struct qe_timers {
+	u8	gtcfr1;		/* Timer 1 and Timer 2 global config register*/
+	u8	res0[0x3];
+	u8	gtcfr2;		/* Timer 3 and timer 4 global config register*/
+	u8	res1[0xB];
+	__be16	gtmdr1;		/* Timer 1 mode register */
+	__be16	gtmdr2;		/* Timer 2 mode register */
+	__be16	gtrfr1;		/* Timer 1 reference register */
+	__be16	gtrfr2;		/* Timer 2 reference register */
+	__be16	gtcpr1;		/* Timer 1 capture register */
+	__be16	gtcpr2;		/* Timer 2 capture register */
+	__be16	gtcnr1;		/* Timer 1 counter */
+	__be16	gtcnr2;		/* Timer 2 counter */
+	__be16	gtmdr3;		/* Timer 3 mode register */
+	__be16	gtmdr4;		/* Timer 4 mode register */
+	__be16	gtrfr3;		/* Timer 3 reference register */
+	__be16	gtrfr4;		/* Timer 4 reference register */
+	__be16	gtcpr3;		/* Timer 3 capture register */
+	__be16	gtcpr4;		/* Timer 4 capture register */
+	__be16	gtcnr3;		/* Timer 3 counter */
+	__be16	gtcnr4;		/* Timer 4 counter */
+	__be16	gtevr1;		/* Timer 1 event register */
+	__be16	gtevr2;		/* Timer 2 event register */
+	__be16	gtevr3;		/* Timer 3 event register */
+	__be16	gtevr4;		/* Timer 4 event register */
+	__be16	gtps;		/* Timer 1 prescale register */
+	u8 res2[0x46];
+} __attribute__ ((packed));
+
+/* BRG */
+struct qe_brg {
+	__be32	brgc[16];	/* BRG configuration registers */
+	u8	res0[0x40];
+} __attribute__ ((packed));
+
+/* SPI */
+struct spi {
+	u8	res0[0x20];
+	__be32	spmode;		/* SPI mode register */
+	u8	res1[0x2];
+	u8	spie;		/* SPI event register */
+	u8	res2[0x1];
+	u8	res3[0x2];
+	u8	spim;		/* SPI mask register */
+	u8	res4[0x1];
+	u8	res5[0x1];
+	u8	spcom;		/* SPI command register */
+	u8	res6[0x2];
+	__be32	spitd;		/* SPI transmit data register (cpu mode) */
+	__be32	spird;		/* SPI receive data register (cpu mode) */
+	u8	res7[0x8];
+} __attribute__ ((packed));
+
+/* SI */
+struct si1 {
+	__be16	siamr1;		/* SI1 TDMA mode register */
+	__be16	sibmr1;		/* SI1 TDMB mode register */
+	__be16	sicmr1;		/* SI1 TDMC mode register */
+	__be16	sidmr1;		/* SI1 TDMD mode register */
+	u8	siglmr1_h;	/* SI1 global mode register high */
+	u8	res0[0x1];
+	u8	sicmdr1_h;	/* SI1 command register high */
+	u8	res2[0x1];
+	u8	sistr1_h;	/* SI1 status register high */
+	u8	res3[0x1];
+	__be16	sirsr1_h;	/* SI1 RAM shadow address register high */
+	u8	sitarc1;	/* SI1 RAM counter Tx TDMA */
+	u8	sitbrc1;	/* SI1 RAM counter Tx TDMB */
+	u8	sitcrc1;	/* SI1 RAM counter Tx TDMC */
+	u8	sitdrc1;	/* SI1 RAM counter Tx TDMD */
+	u8	sirarc1;	/* SI1 RAM counter Rx TDMA */
+	u8	sirbrc1;	/* SI1 RAM counter Rx TDMB */
+	u8	sircrc1;	/* SI1 RAM counter Rx TDMC */
+	u8	sirdrc1;	/* SI1 RAM counter Rx TDMD */
+	u8	res4[0x8];
+	__be16	siemr1;		/* SI1 TDME mode register 16 bits */
+	__be16	sifmr1;		/* SI1 TDMF mode register 16 bits */
+	__be16	sigmr1;		/* SI1 TDMG mode register 16 bits */
+	__be16	sihmr1;		/* SI1 TDMH mode register 16 bits */
+	u8	siglmg1_l;	/* SI1 global mode register low 8 bits */
+	u8	res5[0x1];
+	u8	sicmdr1_l;	/* SI1 command register low 8 bits */
+	u8	res6[0x1];
+	u8	sistr1_l;	/* SI1 status register low 8 bits */
+	u8	res7[0x1];
+	__be16	sirsr1_l;	/* SI1 RAM shadow address register low 16 bits*/
+	u8	siterc1;	/* SI1 RAM counter Tx TDME 8 bits */
+	u8	sitfrc1;	/* SI1 RAM counter Tx TDMF 8 bits */
+	u8	sitgrc1;	/* SI1 RAM counter Tx TDMG 8 bits */
+	u8	sithrc1;	/* SI1 RAM counter Tx TDMH 8 bits */
+	u8	sirerc1;	/* SI1 RAM counter Rx TDME 8 bits */
+	u8	sirfrc1;	/* SI1 RAM counter Rx TDMF 8 bits */
+	u8	sirgrc1;	/* SI1 RAM counter Rx TDMG 8 bits */
+	u8	sirhrc1;	/* SI1 RAM counter Rx TDMH 8 bits */
+	u8	res8[0x8];
+	__be32	siml1;		/* SI1 multiframe limit register */
+	u8	siedm1;		/* SI1 extended diagnostic mode register */
+	u8	res9[0xBB];
+} __attribute__ ((packed));
+
+/* SI Routing Tables */
+struct sir {
+	u8 	tx[0x400];
+	u8	rx[0x400];
+	u8	res0[0x800];
+} __attribute__ ((packed));
+
+/* USB Controller */
+struct usb_ctlr {
+	u8	usb_usmod;
+	u8	usb_usadr;
+	u8	usb_uscom;
+	u8	res1[1];
+	__be16	usb_usep1;
+	__be16	usb_usep2;
+	__be16	usb_usep3;
+	__be16	usb_usep4;
+	u8	res2[4];
+	__be16	usb_usber;
+	u8	res3[2];
+	__be16	usb_usbmr;
+	u8	res4[1];
+	u8	usb_usbs;
+	__be16	usb_ussft;
+	u8	res5[2];
+	__be16	usb_usfrn;
+	u8	res6[0x22];
+} __attribute__ ((packed));
+
+/* MCC */
+struct mcc {
+	__be32	mcce;		/* MCC event register */
+	__be32	mccm;		/* MCC mask register */
+	__be32	mccf;		/* MCC configuration register */
+	__be32	merl;		/* MCC emergency request level register */
+	u8	res0[0xF0];
+} __attribute__ ((packed));
+
+/* QE UCC Slow */
+struct ucc_slow {
+	__be32	gumr_l;		/* UCCx general mode register (low) */
+	__be32	gumr_h;		/* UCCx general mode register (high) */
+	__be16	upsmr;		/* UCCx protocol-specific mode register */
+	u8	res0[0x2];
+	__be16	utodr;		/* UCCx transmit on demand register */
+	__be16	udsr;		/* UCCx data synchronization register */
+	__be16	ucce;		/* UCCx event register */
+	u8	res1[0x2];
+	__be16	uccm;		/* UCCx mask register */
+	u8	res2[0x1];
+	u8	uccs;		/* UCCx status register */
+	u8	res3[0x24];
+	__be16	utpt;
+	u8	res4[0x52];
+	u8	guemr;		/* UCC general extended mode register */
+} __attribute__ ((packed));
+
+/* QE UCC Fast */
+struct ucc_fast {
+	__be32	gumr;		/* UCCx general mode register */
+	__be32	upsmr;		/* UCCx protocol-specific mode register */
+	__be16	utodr;		/* UCCx transmit on demand register */
+	u8	res0[0x2];
+	__be16	udsr;		/* UCCx data synchronization register */
+	u8	res1[0x2];
+	__be32	ucce;		/* UCCx event register */
+	__be32	uccm;		/* UCCx mask register */
+	u8	uccs;		/* UCCx status register */
+	u8	res2[0x7];
+	__be32	urfb;		/* UCC receive FIFO base */
+	__be16	urfs;		/* UCC receive FIFO size */
+	u8	res3[0x2];
+	__be16	urfet;		/* UCC receive FIFO emergency threshold */
+	__be16	urfset;		/* UCC receive FIFO special emergency
+				   threshold */
+	__be32	utfb;		/* UCC transmit FIFO base */
+	__be16	utfs;		/* UCC transmit FIFO size */
+	u8	res4[0x2];
+	__be16	utfet;		/* UCC transmit FIFO emergency threshold */
+	u8	res5[0x2];
+	__be16	utftt;		/* UCC transmit FIFO transmit threshold */
+	u8	res6[0x2];
+	__be16	utpt;		/* UCC transmit polling timer */
+	u8	res7[0x2];
+	__be32	urtry;		/* UCC retry counter register */
+	u8	res8[0x4C];
+	u8	guemr;		/* UCC general extended mode register */
+} __attribute__ ((packed));
+
+struct ucc {
+	union {
+		struct	ucc_slow slow;
+		struct	ucc_fast fast;
+		u8	res[0x200];	/* UCC blocks are 512 bytes each */
+	};
+} __attribute__ ((packed));
+
+/* MultiPHY UTOPIA POS Controllers (UPC) */
+struct upc {
+	__be32	upgcr;		/* UTOPIA/POS general configuration register */
+	__be32	uplpa;		/* UTOPIA/POS last PHY address */
+	__be32	uphec;		/* ATM HEC register */
+	__be32	upuc;		/* UTOPIA/POS UCC configuration */
+	__be32	updc1;		/* UTOPIA/POS device 1 configuration */
+	__be32	updc2;		/* UTOPIA/POS device 2 configuration */
+	__be32	updc3;		/* UTOPIA/POS device 3 configuration */
+	__be32	updc4;		/* UTOPIA/POS device 4 configuration */
+	__be32	upstpa;		/* UTOPIA/POS STPA threshold */
+	u8	res0[0xC];
+	__be32	updrs1_h;	/* UTOPIA/POS device 1 rate select */
+	__be32	updrs1_l;	/* UTOPIA/POS device 1 rate select */
+	__be32	updrs2_h;	/* UTOPIA/POS device 2 rate select */
+	__be32	updrs2_l;	/* UTOPIA/POS device 2 rate select */
+	__be32	updrs3_h;	/* UTOPIA/POS device 3 rate select */
+	__be32	updrs3_l;	/* UTOPIA/POS device 3 rate select */
+	__be32	updrs4_h;	/* UTOPIA/POS device 4 rate select */
+	__be32	updrs4_l;	/* UTOPIA/POS device 4 rate select */
+	__be32	updrp1;		/* UTOPIA/POS device 1 receive priority low */
+	__be32	updrp2;		/* UTOPIA/POS device 2 receive priority low */
+	__be32	updrp3;		/* UTOPIA/POS device 3 receive priority low */
+	__be32	updrp4;		/* UTOPIA/POS device 4 receive priority low */
+	__be32	upde1;		/* UTOPIA/POS device 1 event */
+	__be32	upde2;		/* UTOPIA/POS device 2 event */
+	__be32	upde3;		/* UTOPIA/POS device 3 event */
+	__be32	upde4;		/* UTOPIA/POS device 4 event */
+	__be16	uprp1;
+	__be16	uprp2;
+	__be16	uprp3;
+	__be16	uprp4;
+	u8	res1[0x8];
+	__be16	uptirr1_0;	/* Device 1 transmit internal rate 0 */
+	__be16	uptirr1_1;	/* Device 1 transmit internal rate 1 */
+	__be16	uptirr1_2;	/* Device 1 transmit internal rate 2 */
+	__be16	uptirr1_3;	/* Device 1 transmit internal rate 3 */
+	__be16	uptirr2_0;	/* Device 2 transmit internal rate 0 */
+	__be16	uptirr2_1;	/* Device 2 transmit internal rate 1 */
+	__be16	uptirr2_2;	/* Device 2 transmit internal rate 2 */
+	__be16	uptirr2_3;	/* Device 2 transmit internal rate 3 */
+	__be16	uptirr3_0;	/* Device 3 transmit internal rate 0 */
+	__be16	uptirr3_1;	/* Device 3 transmit internal rate 1 */
+	__be16	uptirr3_2;	/* Device 3 transmit internal rate 2 */
+	__be16	uptirr3_3;	/* Device 3 transmit internal rate 3 */
+	__be16	uptirr4_0;	/* Device 4 transmit internal rate 0 */
+	__be16	uptirr4_1;	/* Device 4 transmit internal rate 1 */
+	__be16	uptirr4_2;	/* Device 4 transmit internal rate 2 */
+	__be16	uptirr4_3;	/* Device 4 transmit internal rate 3 */
+	__be32	uper1;		/* Device 1 port enable register */
+	__be32	uper2;		/* Device 2 port enable register */
+	__be32	uper3;		/* Device 3 port enable register */
+	__be32	uper4;		/* Device 4 port enable register */
+	u8	res2[0x150];
+} __attribute__ ((packed));
+
+/* SDMA */
+struct sdma {
+	__be32	sdsr;		/* Serial DMA status register */
+	__be32	sdmr;		/* Serial DMA mode register */
+	__be32	sdtr1;		/* SDMA system bus threshold register */
+	__be32	sdtr2;		/* SDMA secondary bus threshold register */
+	__be32	sdhy1;		/* SDMA system bus hysteresis register */
+	__be32	sdhy2;		/* SDMA secondary bus hysteresis register */
+	__be32	sdta1;		/* SDMA system bus address register */
+	__be32	sdta2;		/* SDMA secondary bus address register */
+	__be32	sdtm1;		/* SDMA system bus MSNUM register */
+	__be32	sdtm2;		/* SDMA secondary bus MSNUM register */
+	u8	res0[0x10];
+	__be32	sdaqr;		/* SDMA address bus qualify register */
+	__be32	sdaqmr;		/* SDMA address bus qualify mask register */
+	u8	res1[0x4];
+	__be32	sdebcr;		/* SDMA CAM entries base register */
+	u8	res2[0x38];
+} __attribute__ ((packed));
+
+/* Debug Space */
+struct dbg {
+	__be32	bpdcr;		/* Breakpoint debug command register */
+	__be32	bpdsr;		/* Breakpoint debug status register */
+	__be32	bpdmr;		/* Breakpoint debug mask register */
+	__be32	bprmrr0;	/* Breakpoint request mode risc register 0 */
+	__be32	bprmrr1;	/* Breakpoint request mode risc register 1 */
+	u8	res0[0x8];
+	__be32	bprmtr0;	/* Breakpoint request mode trb register 0 */
+	__be32	bprmtr1;	/* Breakpoint request mode trb register 1 */
+	u8	res1[0x8];
+	__be32	bprmir;		/* Breakpoint request mode immediate register */
+	__be32	bprmsr;		/* Breakpoint request mode serial register */
+	__be32	bpemr;		/* Breakpoint exit mode register */
+	u8	res2[0x48];
+} __attribute__ ((packed));
+
+/*
+ * RISC Special Registers (Trap and Breakpoint).  These are described in
+ * the QE Developer's Handbook.
+ */
+struct rsp {
+	__be32 tibcr[16];	/* Trap/instruction breakpoint control regs */
+	u8 res0[64];
+	__be32 ibcr0;
+	__be32 ibs0;
+	__be32 ibcnr0;
+	u8 res1[4];
+	__be32 ibcr1;
+	__be32 ibs1;
+	__be32 ibcnr1;
+	__be32 npcr;
+	__be32 dbcr;
+	__be32 dbar;
+	__be32 dbamr;
+	__be32 dbsr;
+	__be32 dbcnr;
+	u8 res2[12];
+	__be32 dbdr_h;
+	__be32 dbdr_l;
+	__be32 dbdmr_h;
+	__be32 dbdmr_l;
+	__be32 bsr;
+	__be32 bor;
+	__be32 bior;
+	u8 res3[4];
+	__be32 iatr[4];
+	__be32 eccr;		/* Exception control configuration register */
+	__be32 eicr;
+	u8 res4[0x100-0xf8];
+} __attribute__ ((packed));
+
+struct qe_immap {
+	struct qe_iram		iram;		/* I-RAM */
+	struct qe_ic_regs	ic;		/* Interrupt Controller */
+	struct cp_qe		cp;		/* Communications Processor */
+	struct qe_mux		qmx;		/* QE Multiplexer */
+	struct qe_timers	qet;		/* QE Timers */
+	struct spi		spi[0x2];	/* spi */
+	struct mcc		mcc;		/* mcc */
+	struct qe_brg		brg;		/* brg */
+	struct usb_ctlr		usb;		/* USB */
+	struct si1		si1;		/* SI */
+	u8			res11[0x800];
+	struct sir		sir;		/* SI Routing Tables */
+	struct ucc		ucc1;		/* ucc1 */
+	struct ucc		ucc3;		/* ucc3 */
+	struct ucc		ucc5;		/* ucc5 */
+	struct ucc		ucc7;		/* ucc7 */
+	u8			res12[0x600];
+	struct upc		upc1;		/* MultiPHY UTOPIA POS Ctrlr 1*/
+	struct ucc		ucc2;		/* ucc2 */
+	struct ucc		ucc4;		/* ucc4 */
+	struct ucc		ucc6;		/* ucc6 */
+	struct ucc		ucc8;		/* ucc8 */
+	u8			res13[0x600];
+	struct upc		upc2;		/* MultiPHY UTOPIA POS Ctrlr 2*/
+	struct sdma		sdma;		/* SDMA */
+	struct dbg		dbg;		/* 0x104080 - 0x1040FF
+						   Debug Space */
+	struct rsp		rsp[0x2];	/* 0x104100 - 0x1042FF
+						   RISC Special Registers
+						   (Trap and Breakpoint) */
+	u8			res14[0x300];	/* 0x104300 - 0x1045FF */
+	u8			res15[0x3A00];	/* 0x104600 - 0x107FFF */
+	u8			res16[0x8000];	/* 0x108000 - 0x110000 */
+	u8			muram[0xC000];	/* 0x110000 - 0x11C000
+						   Multi-user RAM */
+	u8			res17[0x24000];	/* 0x11C000 - 0x140000 */
+	u8			res18[0xC0000];	/* 0x140000 - 0x200000 */
+} __attribute__ ((packed));
+
+extern struct qe_immap __iomem *qe_immr;
+extern phys_addr_t get_qe_base(void);
+
+static inline unsigned long immrbar_virt_to_phys(void *address)
+{
+	if ( ((u32)address >= (u32)qe_immr) &&
+			((u32)address < ((u32)qe_immr + QE_IMMAP_SIZE)) )
+		return (unsigned long)(address - (u32)qe_immr +
+				(u32)get_qe_base());
+	return (unsigned long)virt_to_phys(address);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_IMMAP_QE_H */
diff --git a/arch/powerpc/include/asm/io-defs.h b/arch/powerpc/include/asm/io-defs.h
new file mode 100644
index 000000000000..44d7927aec69
--- /dev/null
+++ b/arch/powerpc/include/asm/io-defs.h
@@ -0,0 +1,60 @@
+/* This file is meant to be include multiple times by other headers */
+/* last 2 argments are used by platforms/cell/io-workarounds.[ch] */
+
+DEF_PCI_AC_RET(readb, u8, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readw, u16, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readl, u32, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readw_be, u16, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readl_be, u32, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_NORET(writeb, (u8 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writew, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writel, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writew_be, (u16 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writel_be, (u32 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+
+#ifdef __powerpc64__
+DEF_PCI_AC_RET(readq, u64, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_RET(readq_be, u64, (const PCI_IO_ADDR addr), (addr), mem, addr)
+DEF_PCI_AC_NORET(writeq, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+DEF_PCI_AC_NORET(writeq_be, (u64 val, PCI_IO_ADDR addr), (val, addr), mem, addr)
+#endif /* __powerpc64__ */
+
+DEF_PCI_AC_RET(inb, u8, (unsigned long port), (port), pio, port)
+DEF_PCI_AC_RET(inw, u16, (unsigned long port), (port), pio, port)
+DEF_PCI_AC_RET(inl, u32, (unsigned long port), (port), pio, port)
+DEF_PCI_AC_NORET(outb, (u8 val, unsigned long port), (val, port), pio, port)
+DEF_PCI_AC_NORET(outw, (u16 val, unsigned long port), (val, port), pio, port)
+DEF_PCI_AC_NORET(outl, (u32 val, unsigned long port), (val, port), pio, port)
+
+DEF_PCI_AC_NORET(readsb, (const PCI_IO_ADDR a, void *b, unsigned long c),
+		 (a, b, c), mem, a)
+DEF_PCI_AC_NORET(readsw, (const PCI_IO_ADDR a, void *b, unsigned long c),
+		 (a, b, c), mem, a)
+DEF_PCI_AC_NORET(readsl, (const PCI_IO_ADDR a, void *b, unsigned long c),
+		 (a, b, c), mem, a)
+DEF_PCI_AC_NORET(writesb, (PCI_IO_ADDR a, const void *b, unsigned long c),
+		 (a, b, c), mem, a)
+DEF_PCI_AC_NORET(writesw, (PCI_IO_ADDR a, const void *b, unsigned long c),
+		 (a, b, c), mem, a)
+DEF_PCI_AC_NORET(writesl, (PCI_IO_ADDR a, const void *b, unsigned long c),
+		 (a, b, c), mem, a)
+
+DEF_PCI_AC_NORET(insb, (unsigned long p, void *b, unsigned long c),
+		 (p, b, c), pio, p)
+DEF_PCI_AC_NORET(insw, (unsigned long p, void *b, unsigned long c),
+		 (p, b, c), pio, p)
+DEF_PCI_AC_NORET(insl, (unsigned long p, void *b, unsigned long c),
+		 (p, b, c), pio, p)
+DEF_PCI_AC_NORET(outsb, (unsigned long p, const void *b, unsigned long c),
+		 (p, b, c), pio, p)
+DEF_PCI_AC_NORET(outsw, (unsigned long p, const void *b, unsigned long c),
+		 (p, b, c), pio, p)
+DEF_PCI_AC_NORET(outsl, (unsigned long p, const void *b, unsigned long c),
+		 (p, b, c), pio, p)
+
+DEF_PCI_AC_NORET(memset_io, (PCI_IO_ADDR a, int c, unsigned long n),
+		 (a, c, n), mem, a)
+DEF_PCI_AC_NORET(memcpy_fromio, (void *d, const PCI_IO_ADDR s, unsigned long n),
+		 (d, s, n), mem, s)
+DEF_PCI_AC_NORET(memcpy_toio, (PCI_IO_ADDR d, const void *s, unsigned long n),
+		 (d, s, n), mem, d)
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
new file mode 100644
index 000000000000..77c7fa025e65
--- /dev/null
+++ b/arch/powerpc/include/asm/io.h
@@ -0,0 +1,787 @@
+#ifndef _ASM_POWERPC_IO_H
+#define _ASM_POWERPC_IO_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* Check of existence of legacy devices */
+extern int check_legacy_ioport(unsigned long base_port);
+#define I8042_DATA_REG	0x60
+#define FDC_BASE	0x3f0
+/* only relevant for PReP */
+#define _PIDXR		0x279
+#define _PNPWRP		0xa79
+#define PNPBIOS_BASE	0xf000
+
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/byteorder.h>
+#include <asm/synch.h>
+#include <asm/delay.h>
+#include <asm/mmu.h>
+
+#include <asm-generic/iomap.h>
+
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+#endif
+
+#define SIO_CONFIG_RA	0x398
+#define SIO_CONFIG_RD	0x399
+
+#define SLOW_DOWN_IO
+
+/* 32 bits uses slightly different variables for the various IO
+ * bases. Most of this file only uses _IO_BASE though which we
+ * define properly based on the platform
+ */
+#ifndef CONFIG_PCI
+#define _IO_BASE	0
+#define _ISA_MEM_BASE	0
+#define PCI_DRAM_OFFSET 0
+#elif defined(CONFIG_PPC32)
+#define _IO_BASE	isa_io_base
+#define _ISA_MEM_BASE	isa_mem_base
+#define PCI_DRAM_OFFSET	pci_dram_offset
+#else
+#define _IO_BASE	pci_io_base
+#define _ISA_MEM_BASE	isa_mem_base
+#define PCI_DRAM_OFFSET	0
+#endif
+
+extern unsigned long isa_io_base;
+extern unsigned long pci_io_base;
+extern unsigned long pci_dram_offset;
+
+extern resource_size_t isa_mem_base;
+
+#if defined(CONFIG_PPC32) && defined(CONFIG_PPC_INDIRECT_IO)
+#error CONFIG_PPC_INDIRECT_IO is not yet supported on 32 bits
+#endif
+
+/*
+ *
+ * Low level MMIO accessors
+ *
+ * This provides the non-bus specific accessors to MMIO. Those are PowerPC
+ * specific and thus shouldn't be used in generic code. The accessors
+ * provided here are:
+ *
+ *	in_8, in_le16, in_be16, in_le32, in_be32, in_le64, in_be64
+ *	out_8, out_le16, out_be16, out_le32, out_be32, out_le64, out_be64
+ *	_insb, _insw_ns, _insl_ns, _outsb, _outsw_ns, _outsl_ns
+ *
+ * Those operate directly on a kernel virtual address. Note that the prototype
+ * for the out_* accessors has the arguments in opposite order from the usual
+ * linux PCI accessors. Unlike those, they take the address first and the value
+ * next.
+ *
+ * Note: I might drop the _ns suffix on the stream operations soon as it is
+ * simply normal for stream operations to not swap in the first place.
+ *
+ */
+
+#ifdef CONFIG_PPC64
+#define IO_SET_SYNC_FLAG()	do { local_paca->io_sync = 1; } while(0)
+#else
+#define IO_SET_SYNC_FLAG()
+#endif
+
+/* gcc 4.0 and older doesn't have 'Z' constraint */
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ == 0)
+#define DEF_MMIO_IN_LE(name, size, insn)				\
+static inline u##size name(const volatile u##size __iomem *addr)	\
+{									\
+	u##size ret;							\
+	__asm__ __volatile__("sync;"#insn" %0,0,%1;twi 0,%0,0;isync"	\
+		: "=r" (ret) : "r" (addr), "m" (*addr) : "memory");	\
+	return ret;							\
+}
+
+#define DEF_MMIO_OUT_LE(name, size, insn) 				\
+static inline void name(volatile u##size __iomem *addr, u##size val)	\
+{									\
+	__asm__ __volatile__("sync;"#insn" %1,0,%2"			\
+		: "=m" (*addr) : "r" (val), "r" (addr) : "memory");	\
+	IO_SET_SYNC_FLAG();						\
+}
+#else /* newer gcc */
+#define DEF_MMIO_IN_LE(name, size, insn)				\
+static inline u##size name(const volatile u##size __iomem *addr)	\
+{									\
+	u##size ret;							\
+	__asm__ __volatile__("sync;"#insn" %0,%y1;twi 0,%0,0;isync"	\
+		: "=r" (ret) : "Z" (*addr) : "memory");			\
+	return ret;							\
+}
+
+#define DEF_MMIO_OUT_LE(name, size, insn) 				\
+static inline void name(volatile u##size __iomem *addr, u##size val)	\
+{									\
+	__asm__ __volatile__("sync;"#insn" %1,%y0"			\
+		: "=Z" (*addr) : "r" (val) : "memory");			\
+	IO_SET_SYNC_FLAG();						\
+}
+#endif
+
+#define DEF_MMIO_IN_BE(name, size, insn)				\
+static inline u##size name(const volatile u##size __iomem *addr)	\
+{									\
+	u##size ret;							\
+	__asm__ __volatile__("sync;"#insn"%U1%X1 %0,%1;twi 0,%0,0;isync"\
+		: "=r" (ret) : "m" (*addr) : "memory");			\
+	return ret;							\
+}
+
+#define DEF_MMIO_OUT_BE(name, size, insn)				\
+static inline void name(volatile u##size __iomem *addr, u##size val)	\
+{									\
+	__asm__ __volatile__("sync;"#insn"%U0%X0 %1,%0"			\
+		: "=m" (*addr) : "r" (val) : "memory");			\
+	IO_SET_SYNC_FLAG();						\
+}
+
+
+DEF_MMIO_IN_BE(in_8,     8, lbz);
+DEF_MMIO_IN_BE(in_be16, 16, lhz);
+DEF_MMIO_IN_BE(in_be32, 32, lwz);
+DEF_MMIO_IN_LE(in_le16, 16, lhbrx);
+DEF_MMIO_IN_LE(in_le32, 32, lwbrx);
+
+DEF_MMIO_OUT_BE(out_8,     8, stb);
+DEF_MMIO_OUT_BE(out_be16, 16, sth);
+DEF_MMIO_OUT_BE(out_be32, 32, stw);
+DEF_MMIO_OUT_LE(out_le16, 16, sthbrx);
+DEF_MMIO_OUT_LE(out_le32, 32, stwbrx);
+
+#ifdef __powerpc64__
+DEF_MMIO_OUT_BE(out_be64, 64, std);
+DEF_MMIO_IN_BE(in_be64, 64, ld);
+
+/* There is no asm instructions for 64 bits reverse loads and stores */
+static inline u64 in_le64(const volatile u64 __iomem *addr)
+{
+	return swab64(in_be64(addr));
+}
+
+static inline void out_le64(volatile u64 __iomem *addr, u64 val)
+{
+	out_be64(addr, swab64(val));
+}
+#endif /* __powerpc64__ */
+
+/*
+ * Low level IO stream instructions are defined out of line for now
+ */
+extern void _insb(const volatile u8 __iomem *addr, void *buf, long count);
+extern void _outsb(volatile u8 __iomem *addr,const void *buf,long count);
+extern void _insw_ns(const volatile u16 __iomem *addr, void *buf, long count);
+extern void _outsw_ns(volatile u16 __iomem *addr, const void *buf, long count);
+extern void _insl_ns(const volatile u32 __iomem *addr, void *buf, long count);
+extern void _outsl_ns(volatile u32 __iomem *addr, const void *buf, long count);
+
+/* The _ns naming is historical and will be removed. For now, just #define
+ * the non _ns equivalent names
+ */
+#define _insw	_insw_ns
+#define _insl	_insl_ns
+#define _outsw	_outsw_ns
+#define _outsl	_outsl_ns
+
+
+/*
+ * memset_io, memcpy_toio, memcpy_fromio base implementations are out of line
+ */
+
+extern void _memset_io(volatile void __iomem *addr, int c, unsigned long n);
+extern void _memcpy_fromio(void *dest, const volatile void __iomem *src,
+			   unsigned long n);
+extern void _memcpy_toio(volatile void __iomem *dest, const void *src,
+			 unsigned long n);
+
+/*
+ *
+ * PCI and standard ISA accessors
+ *
+ * Those are globally defined linux accessors for devices on PCI or ISA
+ * busses. They follow the Linux defined semantics. The current implementation
+ * for PowerPC is as close as possible to the x86 version of these, and thus
+ * provides fairly heavy weight barriers for the non-raw versions
+ *
+ * In addition, they support a hook mechanism when CONFIG_PPC_INDIRECT_IO
+ * allowing the platform to provide its own implementation of some or all
+ * of the accessors.
+ */
+
+/*
+ * Include the EEH definitions when EEH is enabled only so they don't get
+ * in the way when building for 32 bits
+ */
+#ifdef CONFIG_EEH
+#include <asm/eeh.h>
+#endif
+
+/* Shortcut to the MMIO argument pointer */
+#define PCI_IO_ADDR	volatile void __iomem *
+
+/* Indirect IO address tokens:
+ *
+ * When CONFIG_PPC_INDIRECT_IO is set, the platform can provide hooks
+ * on all IOs. (Note that this is all 64 bits only for now)
+ *
+ * To help platforms who may need to differenciate MMIO addresses in
+ * their hooks, a bitfield is reserved for use by the platform near the
+ * top of MMIO addresses (not PIO, those have to cope the hard way).
+ *
+ * This bit field is 12 bits and is at the top of the IO virtual
+ * addresses PCI_IO_INDIRECT_TOKEN_MASK.
+ *
+ * The kernel virtual space is thus:
+ *
+ *  0xD000000000000000		: vmalloc
+ *  0xD000080000000000		: PCI PHB IO space
+ *  0xD000080080000000		: ioremap
+ *  0xD0000fffffffffff		: end of ioremap region
+ *
+ * Since the top 4 bits are reserved as the region ID, we use thus
+ * the next 12 bits and keep 4 bits available for the future if the
+ * virtual address space is ever to be extended.
+ *
+ * The direct IO mapping operations will then mask off those bits
+ * before doing the actual access, though that only happen when
+ * CONFIG_PPC_INDIRECT_IO is set, thus be careful when you use that
+ * mechanism
+ */
+
+#ifdef CONFIG_PPC_INDIRECT_IO
+#define PCI_IO_IND_TOKEN_MASK	0x0fff000000000000ul
+#define PCI_IO_IND_TOKEN_SHIFT	48
+#define PCI_FIX_ADDR(addr)						\
+	((PCI_IO_ADDR)(((unsigned long)(addr)) & ~PCI_IO_IND_TOKEN_MASK))
+#define PCI_GET_ADDR_TOKEN(addr)					\
+	(((unsigned long)(addr) & PCI_IO_IND_TOKEN_MASK) >> 		\
+		PCI_IO_IND_TOKEN_SHIFT)
+#define PCI_SET_ADDR_TOKEN(addr, token) 				\
+do {									\
+	unsigned long __a = (unsigned long)(addr);			\
+	__a &= ~PCI_IO_IND_TOKEN_MASK;					\
+	__a |= ((unsigned long)(token)) << PCI_IO_IND_TOKEN_SHIFT;	\
+	(addr) = (void __iomem *)__a;					\
+} while(0)
+#else
+#define PCI_FIX_ADDR(addr) (addr)
+#endif
+
+
+/*
+ * Non ordered and non-swapping "raw" accessors
+ */
+
+static inline unsigned char __raw_readb(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned char __force *)PCI_FIX_ADDR(addr);
+}
+static inline unsigned short __raw_readw(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned short __force *)PCI_FIX_ADDR(addr);
+}
+static inline unsigned int __raw_readl(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned int __force *)PCI_FIX_ADDR(addr);
+}
+static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
+{
+	*(volatile unsigned char __force *)PCI_FIX_ADDR(addr) = v;
+}
+static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
+{
+	*(volatile unsigned short __force *)PCI_FIX_ADDR(addr) = v;
+}
+static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
+{
+	*(volatile unsigned int __force *)PCI_FIX_ADDR(addr) = v;
+}
+
+#ifdef __powerpc64__
+static inline unsigned long __raw_readq(const volatile void __iomem *addr)
+{
+	return *(volatile unsigned long __force *)PCI_FIX_ADDR(addr);
+}
+static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
+{
+	*(volatile unsigned long __force *)PCI_FIX_ADDR(addr) = v;
+}
+#endif /* __powerpc64__ */
+
+/*
+ *
+ * PCI PIO and MMIO accessors.
+ *
+ *
+ * On 32 bits, PIO operations have a recovery mechanism in case they trigger
+ * machine checks (which they occasionally do when probing non existing
+ * IO ports on some platforms, like PowerMac and 8xx).
+ * I always found it to be of dubious reliability and I am tempted to get
+ * rid of it one of these days. So if you think it's important to keep it,
+ * please voice up asap. We never had it for 64 bits and I do not intend
+ * to port it over
+ */
+
+#ifdef CONFIG_PPC32
+
+#define __do_in_asm(name, op)				\
+static inline unsigned int name(unsigned int port)	\
+{							\
+	unsigned int x;					\
+	__asm__ __volatile__(				\
+		"sync\n"				\
+		"0:"	op "	%0,0,%1\n"		\
+		"1:	twi	0,%0,0\n"		\
+		"2:	isync\n"			\
+		"3:	nop\n"				\
+		"4:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"5:	li	%0,-1\n"		\
+		"	b	4b\n"			\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+		"	.align	2\n"			\
+		"	.long	0b,5b\n"		\
+		"	.long	1b,5b\n"		\
+		"	.long	2b,5b\n"		\
+		"	.long	3b,5b\n"		\
+		".previous"				\
+		: "=&r" (x)				\
+		: "r" (port + _IO_BASE)			\
+		: "memory");  				\
+	return x;					\
+}
+
+#define __do_out_asm(name, op)				\
+static inline void name(unsigned int val, unsigned int port) \
+{							\
+	__asm__ __volatile__(				\
+		"sync\n"				\
+		"0:" op " %0,0,%1\n"			\
+		"1:	sync\n"				\
+		"2:\n"					\
+		".section __ex_table,\"a\"\n"		\
+		"	.align	2\n"			\
+		"	.long	0b,2b\n"		\
+		"	.long	1b,2b\n"		\
+		".previous"				\
+		: : "r" (val), "r" (port + _IO_BASE)	\
+		: "memory");   	   	   		\
+}
+
+__do_in_asm(_rec_inb, "lbzx")
+__do_in_asm(_rec_inw, "lhbrx")
+__do_in_asm(_rec_inl, "lwbrx")
+__do_out_asm(_rec_outb, "stbx")
+__do_out_asm(_rec_outw, "sthbrx")
+__do_out_asm(_rec_outl, "stwbrx")
+
+#endif /* CONFIG_PPC32 */
+
+/* The "__do_*" operations below provide the actual "base" implementation
+ * for each of the defined acccessor. Some of them use the out_* functions
+ * directly, some of them still use EEH, though we might change that in the
+ * future. Those macros below provide the necessary argument swapping and
+ * handling of the IO base for PIO.
+ *
+ * They are themselves used by the macros that define the actual accessors
+ * and can be used by the hooks if any.
+ *
+ * Note that PIO operations are always defined in terms of their corresonding
+ * MMIO operations. That allows platforms like iSeries who want to modify the
+ * behaviour of both to only hook on the MMIO version and get both. It's also
+ * possible to hook directly at the toplevel PIO operation if they have to
+ * be handled differently
+ */
+#define __do_writeb(val, addr)	out_8(PCI_FIX_ADDR(addr), val)
+#define __do_writew(val, addr)	out_le16(PCI_FIX_ADDR(addr), val)
+#define __do_writel(val, addr)	out_le32(PCI_FIX_ADDR(addr), val)
+#define __do_writeq(val, addr)	out_le64(PCI_FIX_ADDR(addr), val)
+#define __do_writew_be(val, addr) out_be16(PCI_FIX_ADDR(addr), val)
+#define __do_writel_be(val, addr) out_be32(PCI_FIX_ADDR(addr), val)
+#define __do_writeq_be(val, addr) out_be64(PCI_FIX_ADDR(addr), val)
+
+#ifdef CONFIG_EEH
+#define __do_readb(addr)	eeh_readb(PCI_FIX_ADDR(addr))
+#define __do_readw(addr)	eeh_readw(PCI_FIX_ADDR(addr))
+#define __do_readl(addr)	eeh_readl(PCI_FIX_ADDR(addr))
+#define __do_readq(addr)	eeh_readq(PCI_FIX_ADDR(addr))
+#define __do_readw_be(addr)	eeh_readw_be(PCI_FIX_ADDR(addr))
+#define __do_readl_be(addr)	eeh_readl_be(PCI_FIX_ADDR(addr))
+#define __do_readq_be(addr)	eeh_readq_be(PCI_FIX_ADDR(addr))
+#else /* CONFIG_EEH */
+#define __do_readb(addr)	in_8(PCI_FIX_ADDR(addr))
+#define __do_readw(addr)	in_le16(PCI_FIX_ADDR(addr))
+#define __do_readl(addr)	in_le32(PCI_FIX_ADDR(addr))
+#define __do_readq(addr)	in_le64(PCI_FIX_ADDR(addr))
+#define __do_readw_be(addr)	in_be16(PCI_FIX_ADDR(addr))
+#define __do_readl_be(addr)	in_be32(PCI_FIX_ADDR(addr))
+#define __do_readq_be(addr)	in_be64(PCI_FIX_ADDR(addr))
+#endif /* !defined(CONFIG_EEH) */
+
+#ifdef CONFIG_PPC32
+#define __do_outb(val, port)	_rec_outb(val, port)
+#define __do_outw(val, port)	_rec_outw(val, port)
+#define __do_outl(val, port)	_rec_outl(val, port)
+#define __do_inb(port)		_rec_inb(port)
+#define __do_inw(port)		_rec_inw(port)
+#define __do_inl(port)		_rec_inl(port)
+#else /* CONFIG_PPC32 */
+#define __do_outb(val, port)	writeb(val,(PCI_IO_ADDR)_IO_BASE+port);
+#define __do_outw(val, port)	writew(val,(PCI_IO_ADDR)_IO_BASE+port);
+#define __do_outl(val, port)	writel(val,(PCI_IO_ADDR)_IO_BASE+port);
+#define __do_inb(port)		readb((PCI_IO_ADDR)_IO_BASE + port);
+#define __do_inw(port)		readw((PCI_IO_ADDR)_IO_BASE + port);
+#define __do_inl(port)		readl((PCI_IO_ADDR)_IO_BASE + port);
+#endif /* !CONFIG_PPC32 */
+
+#ifdef CONFIG_EEH
+#define __do_readsb(a, b, n)	eeh_readsb(PCI_FIX_ADDR(a), (b), (n))
+#define __do_readsw(a, b, n)	eeh_readsw(PCI_FIX_ADDR(a), (b), (n))
+#define __do_readsl(a, b, n)	eeh_readsl(PCI_FIX_ADDR(a), (b), (n))
+#else /* CONFIG_EEH */
+#define __do_readsb(a, b, n)	_insb(PCI_FIX_ADDR(a), (b), (n))
+#define __do_readsw(a, b, n)	_insw(PCI_FIX_ADDR(a), (b), (n))
+#define __do_readsl(a, b, n)	_insl(PCI_FIX_ADDR(a), (b), (n))
+#endif /* !CONFIG_EEH */
+#define __do_writesb(a, b, n)	_outsb(PCI_FIX_ADDR(a),(b),(n))
+#define __do_writesw(a, b, n)	_outsw(PCI_FIX_ADDR(a),(b),(n))
+#define __do_writesl(a, b, n)	_outsl(PCI_FIX_ADDR(a),(b),(n))
+
+#define __do_insb(p, b, n)	readsb((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
+#define __do_insw(p, b, n)	readsw((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
+#define __do_insl(p, b, n)	readsl((PCI_IO_ADDR)_IO_BASE+(p), (b), (n))
+#define __do_outsb(p, b, n)	writesb((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
+#define __do_outsw(p, b, n)	writesw((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
+#define __do_outsl(p, b, n)	writesl((PCI_IO_ADDR)_IO_BASE+(p),(b),(n))
+
+#define __do_memset_io(addr, c, n)	\
+				_memset_io(PCI_FIX_ADDR(addr), c, n)
+#define __do_memcpy_toio(dst, src, n)	\
+				_memcpy_toio(PCI_FIX_ADDR(dst), src, n)
+
+#ifdef CONFIG_EEH
+#define __do_memcpy_fromio(dst, src, n)	\
+				eeh_memcpy_fromio(dst, PCI_FIX_ADDR(src), n)
+#else /* CONFIG_EEH */
+#define __do_memcpy_fromio(dst, src, n)	\
+				_memcpy_fromio(dst,PCI_FIX_ADDR(src),n)
+#endif /* !CONFIG_EEH */
+
+#ifdef CONFIG_PPC_INDIRECT_IO
+#define DEF_PCI_HOOK(x)		x
+#else
+#define DEF_PCI_HOOK(x)		NULL
+#endif
+
+/* Structure containing all the hooks */
+extern struct ppc_pci_io {
+
+#define DEF_PCI_AC_RET(name, ret, at, al, space, aa)	ret (*name) at;
+#define DEF_PCI_AC_NORET(name, at, al, space, aa)	void (*name) at;
+
+#include <asm/io-defs.h>
+
+#undef DEF_PCI_AC_RET
+#undef DEF_PCI_AC_NORET
+
+} ppc_pci_io;
+
+/* The inline wrappers */
+#define DEF_PCI_AC_RET(name, ret, at, al, space, aa)		\
+static inline ret name at					\
+{								\
+	if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)		\
+		return ppc_pci_io.name al;			\
+	return __do_##name al;					\
+}
+
+#define DEF_PCI_AC_NORET(name, at, al, space, aa)		\
+static inline void name at					\
+{								\
+	if (DEF_PCI_HOOK(ppc_pci_io.name) != NULL)		\
+		ppc_pci_io.name al;				\
+	else							\
+		__do_##name al;					\
+}
+
+#include <asm/io-defs.h>
+
+#undef DEF_PCI_AC_RET
+#undef DEF_PCI_AC_NORET
+
+/* Some drivers check for the presence of readq & writeq with
+ * a #ifdef, so we make them happy here.
+ */
+#ifdef __powerpc64__
+#define readq	readq
+#define writeq	writeq
+#endif
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+/*
+ * We don't do relaxed operations yet, at least not with this semantic
+ */
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+#define readq_relaxed(addr) readq(addr)
+
+#ifdef CONFIG_PPC32
+#define mmiowb()
+#else
+/*
+ * Enforce synchronisation of stores vs. spin_unlock
+ * (this does it explicitly, though our implementation of spin_unlock
+ * does it implicitely too)
+ */
+static inline void mmiowb(void)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__("sync; li %0,0; stb %0,%1(13)"
+	: "=&r" (tmp) : "i" (offsetof(struct paca_struct, io_sync))
+	: "memory");
+}
+#endif /* !CONFIG_PPC32 */
+
+static inline void iosync(void)
+{
+        __asm__ __volatile__ ("sync" : : : "memory");
+}
+
+/* Enforce in-order execution of data I/O.
+ * No distinction between read/write on PPC; use eieio for all three.
+ * Those are fairly week though. They don't provide a barrier between
+ * MMIO and cacheable storage nor do they provide a barrier vs. locks,
+ * they only provide barriers between 2 __raw MMIO operations and
+ * possibly break write combining.
+ */
+#define iobarrier_rw() eieio()
+#define iobarrier_r()  eieio()
+#define iobarrier_w()  eieio()
+
+
+/*
+ * output pause versions need a delay at least for the
+ * w83c105 ide controller in a p610.
+ */
+#define inb_p(port)             inb(port)
+#define outb_p(val, port)       (udelay(1), outb((val), (port)))
+#define inw_p(port)             inw(port)
+#define outw_p(val, port)       (udelay(1), outw((val), (port)))
+#define inl_p(port)             inl(port)
+#define outl_p(val, port)       (udelay(1), outl((val), (port)))
+
+
+#define IO_SPACE_LIMIT ~(0UL)
+
+
+/**
+ * ioremap     -   map bus memory into CPU space
+ * @address:   bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * We provide a few variations of it:
+ *
+ * * ioremap is the standard one and provides non-cacheable guarded mappings
+ *   and can be hooked by the platform via ppc_md
+ *
+ * * ioremap_flags allows to specify the page flags as an argument and can
+ *   also be hooked by the platform via ppc_md. ioremap_prot is the exact
+ *   same thing as ioremap_flags.
+ *
+ * * ioremap_nocache is identical to ioremap
+ *
+ * * iounmap undoes such a mapping and can be hooked
+ *
+ * * __ioremap_at (and the pending __iounmap_at) are low level functions to
+ *   create hand-made mappings for use only by the PCI code and cannot
+ *   currently be hooked. Must be page aligned.
+ *
+ * * __ioremap is the low level implementation used by ioremap and
+ *   ioremap_flags and cannot be hooked (but can be used by a hook on one
+ *   of the previous ones)
+ *
+ * * __iounmap, is the low level implementation used by iounmap and cannot
+ *   be hooked (but can be used by a hook on iounmap)
+ *
+ */
+extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
+extern void __iomem *ioremap_flags(phys_addr_t address, unsigned long size,
+				   unsigned long flags);
+#define ioremap_nocache(addr, size)	ioremap((addr), (size))
+#define ioremap_prot(addr, size, prot)	ioremap_flags((addr), (size), (prot))
+
+extern void iounmap(volatile void __iomem *addr);
+
+extern void __iomem *__ioremap(phys_addr_t, unsigned long size,
+			       unsigned long flags);
+extern void __iounmap(volatile void __iomem *addr);
+
+extern void __iomem * __ioremap_at(phys_addr_t pa, void *ea,
+				   unsigned long size, unsigned long flags);
+extern void __iounmap_at(void *ea, unsigned long size);
+
+/*
+ * When CONFIG_PPC_INDIRECT_IO is set, we use the generic iomap implementation
+ * which needs some additional definitions here. They basically allow PIO
+ * space overall to be 1GB. This will work as long as we never try to use
+ * iomap to map MMIO below 1GB which should be fine on ppc64
+ */
+#define HAVE_ARCH_PIO_SIZE		1
+#define PIO_OFFSET			0x00000000UL
+#define PIO_MASK			(FULL_IO_SIZE - 1)
+#define PIO_RESERVED			(FULL_IO_SIZE)
+
+#define mmio_read16be(addr)		readw_be(addr)
+#define mmio_read32be(addr)		readl_be(addr)
+#define mmio_write16be(val, addr)	writew_be(val, addr)
+#define mmio_write32be(val, addr)	writel_be(val, addr)
+#define mmio_insb(addr, dst, count)	readsb(addr, dst, count)
+#define mmio_insw(addr, dst, count)	readsw(addr, dst, count)
+#define mmio_insl(addr, dst, count)	readsl(addr, dst, count)
+#define mmio_outsb(addr, src, count)	writesb(addr, src, count)
+#define mmio_outsw(addr, src, count)	writesw(addr, src, count)
+#define mmio_outsl(addr, src, count)	writesl(addr, src, count)
+
+/**
+ *	virt_to_phys	-	map virtual addresses to physical
+ *	@address: address to remap
+ *
+ *	The returned physical address is the physical (CPU) mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses directly mapped or allocated via kmalloc.
+ *
+ *	This function does not give bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+static inline unsigned long virt_to_phys(volatile void * address)
+{
+	return __pa((unsigned long)address);
+}
+
+/**
+ *	phys_to_virt	-	map physical address to virtual
+ *	@address: address to remap
+ *
+ *	The returned virtual address is a current CPU mapping for
+ *	the memory address given. It is only valid to use this function on
+ *	addresses that have a kernel mapping
+ *
+ *	This function does not handle bus mappings for DMA transfers. In
+ *	almost all conceivable cases a device driver should not be using
+ *	this function
+ */
+static inline void * phys_to_virt(unsigned long address)
+{
+	return (void *)__va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+/* We do NOT want virtual merging, it would put too much pressure on
+ * our iommu allocator. Instead, we want drivers to be smart enough
+ * to coalesce sglists that happen to have been mapped in a contiguous
+ * way by the iommu
+ */
+#define BIO_VMERGE_BOUNDARY	0
+
+/*
+ * 32 bits still uses virt_to_bus() for it's implementation of DMA
+ * mappings se we have to keep it defined here. We also have some old
+ * drivers (shame shame shame) that use bus_to_virt() and haven't been
+ * fixed yet so I need to define it here.
+ */
+#ifdef CONFIG_PPC32
+
+static inline unsigned long virt_to_bus(volatile void * address)
+{
+        if (address == NULL)
+		return 0;
+        return __pa(address) + PCI_DRAM_OFFSET;
+}
+
+static inline void * bus_to_virt(unsigned long address)
+{
+        if (address == 0)
+		return NULL;
+        return __va(address - PCI_DRAM_OFFSET);
+}
+
+#define page_to_bus(page)	(page_to_phys(page) + PCI_DRAM_OFFSET)
+
+#endif /* CONFIG_PPC32 */
+
+/* access ports */
+#define setbits32(_addr, _v) out_be32((_addr), in_be32(_addr) |  (_v))
+#define clrbits32(_addr, _v) out_be32((_addr), in_be32(_addr) & ~(_v))
+
+#define setbits16(_addr, _v) out_be16((_addr), in_be16(_addr) |  (_v))
+#define clrbits16(_addr, _v) out_be16((_addr), in_be16(_addr) & ~(_v))
+
+#define setbits8(_addr, _v) out_8((_addr), in_8(_addr) |  (_v))
+#define clrbits8(_addr, _v) out_8((_addr), in_8(_addr) & ~(_v))
+
+/* Clear and set bits in one shot.  These macros can be used to clear and
+ * set multiple bits in a register using a single read-modify-write.  These
+ * macros can also be used to set a multiple-bit bit pattern using a mask,
+ * by specifying the mask in the 'clear' parameter and the new bit pattern
+ * in the 'set' parameter.
+ */
+
+#define clrsetbits(type, addr, clear, set) \
+	out_##type((addr), (in_##type(addr) & ~(clear)) | (set))
+
+#ifdef __powerpc64__
+#define clrsetbits_be64(addr, clear, set) clrsetbits(be64, addr, clear, set)
+#define clrsetbits_le64(addr, clear, set) clrsetbits(le64, addr, clear, set)
+#endif
+
+#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set)
+#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set)
+
+#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set)
+#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set)
+
+#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set)
+
+void __iomem *devm_ioremap_prot(struct device *dev, resource_size_t offset,
+				size_t size, unsigned long flags);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_IO_H */
diff --git a/arch/powerpc/include/asm/ioctl.h b/arch/powerpc/include/asm/ioctl.h
new file mode 100644
index 000000000000..57d68304218b
--- /dev/null
+++ b/arch/powerpc/include/asm/ioctl.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_POWERPC_IOCTL_H
+#define _ASM_POWERPC_IOCTL_H
+
+#define _IOC_SIZEBITS	13
+#define _IOC_DIRBITS	3
+
+#define _IOC_NONE	1U
+#define _IOC_READ	2U
+#define _IOC_WRITE	4U
+
+#include <asm-generic/ioctl.h>
+
+#endif	/* _ASM_POWERPC_IOCTL_H */
diff --git a/arch/powerpc/include/asm/ioctls.h b/arch/powerpc/include/asm/ioctls.h
new file mode 100644
index 000000000000..279a6229584b
--- /dev/null
+++ b/arch/powerpc/include/asm/ioctls.h
@@ -0,0 +1,110 @@
+#ifndef _ASM_POWERPC_IOCTLS_H
+#define _ASM_POWERPC_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	_IOR('f', 128, loff_t)
+
+#define TIOCGETP	_IOR('t', 8, struct sgttyb)
+#define TIOCSETP	_IOW('t', 9, struct sgttyb)
+#define TIOCSETN	_IOW('t', 10, struct sgttyb)	/* TIOCSETP wo flush */
+
+#define TIOCSETC	_IOW('t', 17, struct tchars)
+#define TIOCGETC	_IOR('t', 18, struct tchars)
+#define TCGETS		_IOR('t', 19, struct termios)
+#define TCSETS		_IOW('t', 20, struct termios)
+#define TCSETSW		_IOW('t', 21, struct termios)
+#define TCSETSF		_IOW('t', 22, struct termios)
+
+#define TCGETA		_IOR('t', 23, struct termio)
+#define TCSETA		_IOW('t', 24, struct termio)
+#define TCSETAW		_IOW('t', 25, struct termio)
+#define TCSETAF		_IOW('t', 28, struct termio)
+
+#define TCSBRK		_IO('t', 29)
+#define TCXONC		_IO('t', 30)
+#define TCFLSH		_IO('t', 31)
+
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
+#define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
+#define	TIOCSTOP	_IO('t', 111)		/* stop output, like ^S */
+#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
+
+#define TIOCGLTC	_IOR('t', 116, struct ltchars)
+#define TIOCSLTC	_IOW('t', 117, struct ltchars)
+#define TIOCSPGRP	_IOW('t', 118, int)
+#define TIOCGPGRP	_IOR('t', 119, int)
+
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+
+#define TIOCSTI		0x5412
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+# define TIOCM_LE	0x001
+# define TIOCM_DTR	0x002
+# define TIOCM_RTS	0x004
+# define TIOCM_ST	0x008
+# define TIOCM_SR	0x010
+# define TIOCM_CTS	0x020
+# define TIOCM_CAR	0x040
+# define TIOCM_RNG	0x080
+# define TIOCM_DSR	0x100
+# define TIOCM_CD	TIOCM_CAR
+# define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+# define TIOCPKT_DATA		 0
+# define TIOCPKT_FLUSHREAD	 1
+# define TIOCPKT_FLUSHWRITE	 2
+# define TIOCPKT_STOP		 4
+# define TIOCPKT_START		 8
+# define TIOCPKT_NOSTOP		16
+# define TIOCPKT_DOSTOP		32
+
+
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+  /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+# define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+
+#endif	/* _ASM_POWERPC_IOCTLS_H */
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
new file mode 100644
index 000000000000..51ecfef8d843
--- /dev/null
+++ b/arch/powerpc/include/asm/iommu.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
+ * Rewrite, cleanup:
+ * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ * 
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_IOMMU_H
+#define _ASM_IOMMU_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/spinlock.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/bitops.h>
+#include <asm/machdep.h>
+#include <asm/types.h>
+
+#define IOMMU_PAGE_SHIFT      12
+#define IOMMU_PAGE_SIZE       (ASM_CONST(1) << IOMMU_PAGE_SHIFT)
+#define IOMMU_PAGE_MASK       (~((1 << IOMMU_PAGE_SHIFT) - 1))
+#define IOMMU_PAGE_ALIGN(addr) _ALIGN_UP(addr, IOMMU_PAGE_SIZE)
+
+/* Boot time flags */
+extern int iommu_is_off;
+extern int iommu_force_on;
+
+/* Pure 2^n version of get_order */
+static __inline__ __attribute_const__ int get_iommu_order(unsigned long size)
+{
+	return __ilog2((size - 1) >> IOMMU_PAGE_SHIFT) + 1;
+}
+
+
+/*
+ * IOMAP_MAX_ORDER defines the largest contiguous block
+ * of dma space we can get.  IOMAP_MAX_ORDER = 13
+ * allows up to 2**12 pages (4096 * 4096) = 16 MB
+ */
+#define IOMAP_MAX_ORDER		13
+
+struct iommu_table {
+	unsigned long  it_busno;     /* Bus number this table belongs to */
+	unsigned long  it_size;      /* Size of iommu table in entries */
+	unsigned long  it_offset;    /* Offset into global table */
+	unsigned long  it_base;      /* mapped address of tce table */
+	unsigned long  it_index;     /* which iommu table this is */
+	unsigned long  it_type;      /* type: PCI or Virtual Bus */
+	unsigned long  it_blocksize; /* Entries in each block (cacheline) */
+	unsigned long  it_hint;      /* Hint for next alloc */
+	unsigned long  it_largehint; /* Hint for large allocs */
+	unsigned long  it_halfpoint; /* Breaking point for small/large allocs */
+	spinlock_t     it_lock;      /* Protects it_map */
+	unsigned long *it_map;       /* A simple allocation bitmap for now */
+};
+
+struct scatterlist;
+
+/* Frees table for an individual device node */
+extern void iommu_free_table(struct iommu_table *tbl, const char *node_name);
+
+/* Initializes an iommu_table based in values set in the passed-in
+ * structure
+ */
+extern struct iommu_table *iommu_init_table(struct iommu_table * tbl,
+					    int nid);
+
+extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
+			struct scatterlist *sglist, int nelems,
+			unsigned long mask, enum dma_data_direction direction,
+			struct dma_attrs *attrs);
+extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
+			   int nelems, enum dma_data_direction direction,
+			   struct dma_attrs *attrs);
+
+extern void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl,
+				  size_t size, dma_addr_t *dma_handle,
+				  unsigned long mask, gfp_t flag, int node);
+extern void iommu_free_coherent(struct iommu_table *tbl, size_t size,
+				void *vaddr, dma_addr_t dma_handle);
+extern dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
+				   void *vaddr, size_t size, unsigned long mask,
+				   enum dma_data_direction direction,
+				   struct dma_attrs *attrs);
+extern void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
+			       size_t size, enum dma_data_direction direction,
+			       struct dma_attrs *attrs);
+
+extern void iommu_init_early_pSeries(void);
+extern void iommu_init_early_iSeries(void);
+extern void iommu_init_early_dart(void);
+extern void iommu_init_early_pasemi(void);
+
+#ifdef CONFIG_PCI
+extern void pci_iommu_init(void);
+extern void pci_direct_iommu_init(void);
+#else
+static inline void pci_iommu_init(void) { }
+#endif
+
+extern void alloc_dart_table(void);
+#if defined(CONFIG_PPC64) && defined(CONFIG_PM)
+static inline void iommu_save(void)
+{
+	if (ppc_md.iommu_save)
+		ppc_md.iommu_save();
+}
+
+static inline void iommu_restore(void)
+{
+	if (ppc_md.iommu_restore)
+		ppc_md.iommu_restore();
+}
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_IOMMU_H */
diff --git a/arch/powerpc/include/asm/ipcbuf.h b/arch/powerpc/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..2c3e1d94db1d
--- /dev/null
+++ b/arch/powerpc/include/asm/ipcbuf.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_POWERPC_IPCBUF_H
+#define _ASM_POWERPC_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for the powerpc is identical to
+ * kern_ipc_perm as we have always had 32-bit UIDs and GIDs in the
+ * kernel.  Note extra padding because this structure is passed back
+ * and forth between kernel and user space.  Pad space is left for:
+ *	- 1 32-bit value to fill up for 8-byte alignment
+ *	- 2 miscellaneous 64-bit values
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+
+struct ipc64_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode;
+	unsigned int	seq;
+	unsigned int	__pad1;
+	unsigned long long __unused1;
+	unsigned long long __unused2;
+};
+
+#endif /* _ASM_POWERPC_IPCBUF_H */
diff --git a/arch/powerpc/include/asm/ipic.h b/arch/powerpc/include/asm/ipic.h
new file mode 100644
index 000000000000..fb59829983b8
--- /dev/null
+++ b/arch/powerpc/include/asm/ipic.h
@@ -0,0 +1,84 @@
+/*
+ * IPIC external definitions and structure.
+ *
+ * Maintainer: Kumar Gala <galak@kernel.crashing.org>
+ *
+ * Copyright 2005 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_IPIC_H__
+#define __ASM_IPIC_H__
+
+#include <linux/irq.h>
+
+/* Flags when we init the IPIC */
+#define IPIC_SPREADMODE_GRP_A	0x00000001
+#define IPIC_SPREADMODE_GRP_B	0x00000002
+#define IPIC_SPREADMODE_GRP_C	0x00000004
+#define IPIC_SPREADMODE_GRP_D	0x00000008
+#define IPIC_SPREADMODE_MIX_A	0x00000010
+#define IPIC_SPREADMODE_MIX_B	0x00000020
+#define IPIC_DISABLE_MCP_OUT	0x00000040
+#define IPIC_IRQ0_MCP		0x00000080
+
+/* IPIC registers offsets */
+#define IPIC_SICFR	0x00	/* System Global Interrupt Configuration Register */
+#define IPIC_SIVCR	0x04	/* System Global Interrupt Vector Register */
+#define IPIC_SIPNR_H	0x08	/* System Internal Interrupt Pending Register (HIGH) */
+#define IPIC_SIPNR_L	0x0C	/* System Internal Interrupt Pending Register (LOW) */
+#define IPIC_SIPRR_A	0x10	/* System Internal Interrupt group A Priority Register */
+#define IPIC_SIPRR_B	0x14	/* System Internal Interrupt group B Priority Register */
+#define IPIC_SIPRR_C	0x18	/* System Internal Interrupt group C Priority Register */
+#define IPIC_SIPRR_D	0x1C	/* System Internal Interrupt group D Priority Register */
+#define IPIC_SIMSR_H	0x20	/* System Internal Interrupt Mask Register (HIGH) */
+#define IPIC_SIMSR_L	0x24	/* System Internal Interrupt Mask Register (LOW) */
+#define IPIC_SICNR	0x28	/* System Internal Interrupt Control Register */
+#define IPIC_SEPNR	0x2C	/* System External Interrupt Pending Register */
+#define IPIC_SMPRR_A	0x30	/* System Mixed Interrupt group A Priority Register */
+#define IPIC_SMPRR_B	0x34	/* System Mixed Interrupt group B Priority Register */
+#define IPIC_SEMSR	0x38	/* System External Interrupt Mask Register */
+#define IPIC_SECNR	0x3C	/* System External Interrupt Control Register */
+#define IPIC_SERSR	0x40	/* System Error Status Register */
+#define IPIC_SERMR	0x44	/* System Error Mask Register */
+#define IPIC_SERCR	0x48	/* System Error Control Register */
+#define IPIC_SIFCR_H	0x50	/* System Internal Interrupt Force Register (HIGH) */
+#define IPIC_SIFCR_L	0x54	/* System Internal Interrupt Force Register (LOW) */
+#define IPIC_SEFCR	0x58	/* System External Interrupt Force Register */
+#define IPIC_SERFR	0x5C	/* System Error Force Register */
+#define IPIC_SCVCR	0x60	/* System Critical Interrupt Vector Register */
+#define IPIC_SMVCR	0x64	/* System Management Interrupt Vector Register */
+
+enum ipic_prio_grp {
+	IPIC_INT_GRP_A = IPIC_SIPRR_A,
+	IPIC_INT_GRP_D = IPIC_SIPRR_D,
+	IPIC_MIX_GRP_A = IPIC_SMPRR_A,
+	IPIC_MIX_GRP_B = IPIC_SMPRR_B,
+};
+
+enum ipic_mcp_irq {
+	IPIC_MCP_IRQ0 = 0,
+	IPIC_MCP_WDT  = 1,
+	IPIC_MCP_SBA  = 2,
+	IPIC_MCP_PCI1 = 5,
+	IPIC_MCP_PCI2 = 6,
+	IPIC_MCP_MU   = 7,
+};
+
+extern int ipic_set_priority(unsigned int irq, unsigned int priority);
+extern void ipic_set_highest_priority(unsigned int irq);
+extern void ipic_set_default_priority(void);
+extern void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq);
+extern void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq);
+extern u32 ipic_get_mcp_status(void);
+extern void ipic_clear_mcp_status(u32 mask);
+
+extern struct ipic * ipic_init(struct device_node *node, unsigned int flags);
+extern unsigned int ipic_get_irq(void);
+
+#endif /* __ASM_IPIC_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h
new file mode 100644
index 000000000000..a372f76836c2
--- /dev/null
+++ b/arch/powerpc/include/asm/irq.h
@@ -0,0 +1,366 @@
+#ifdef __KERNEL__
+#ifndef _ASM_POWERPC_IRQ_H
+#define _ASM_POWERPC_IRQ_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <linux/list.h>
+#include <linux/radix-tree.h>
+
+#include <asm/types.h>
+#include <asm/atomic.h>
+
+
+#define get_irq_desc(irq) (&irq_desc[(irq)])
+
+/* Define a way to iterate across irqs. */
+#define for_each_irq(i) \
+	for ((i) = 0; (i) < NR_IRQS; ++(i))
+
+extern atomic_t ppc_n_lost_interrupts;
+
+/* This number is used when no interrupt has been assigned */
+#define NO_IRQ			(0)
+
+/* This is a special irq number to return from get_irq() to tell that
+ * no interrupt happened _and_ ignore it (don't count it as bad). Some
+ * platforms like iSeries rely on that.
+ */
+#define NO_IRQ_IGNORE		((unsigned int)-1)
+
+/* Total number of virq in the platform (make it a CONFIG_* option ? */
+#define NR_IRQS		512
+
+/* Number of irqs reserved for the legacy controller */
+#define NUM_ISA_INTERRUPTS	16
+
+/* This type is the placeholder for a hardware interrupt number. It has to
+ * be big enough to enclose whatever representation is used by a given
+ * platform.
+ */
+typedef unsigned long irq_hw_number_t;
+
+/* Interrupt controller "host" data structure. This could be defined as a
+ * irq domain controller. That is, it handles the mapping between hardware
+ * and virtual interrupt numbers for a given interrupt domain. The host
+ * structure is generally created by the PIC code for a given PIC instance
+ * (though a host can cover more than one PIC if they have a flat number
+ * model). It's the host callbacks that are responsible for setting the
+ * irq_chip on a given irq_desc after it's been mapped.
+ *
+ * The host code and data structures are fairly agnostic to the fact that
+ * we use an open firmware device-tree. We do have references to struct
+ * device_node in two places: in irq_find_host() to find the host matching
+ * a given interrupt controller node, and of course as an argument to its
+ * counterpart host->ops->match() callback. However, those are treated as
+ * generic pointers by the core and the fact that it's actually a device-node
+ * pointer is purely a convention between callers and implementation. This
+ * code could thus be used on other architectures by replacing those two
+ * by some sort of arch-specific void * "token" used to identify interrupt
+ * controllers.
+ */
+struct irq_host;
+struct radix_tree_root;
+
+/* Functions below are provided by the host and called whenever a new mapping
+ * is created or an old mapping is disposed. The host can then proceed to
+ * whatever internal data structures management is required. It also needs
+ * to setup the irq_desc when returning from map().
+ */
+struct irq_host_ops {
+	/* Match an interrupt controller device node to a host, returns
+	 * 1 on a match
+	 */
+	int (*match)(struct irq_host *h, struct device_node *node);
+
+	/* Create or update a mapping between a virtual irq number and a hw
+	 * irq number. This is called only once for a given mapping.
+	 */
+	int (*map)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
+
+	/* Dispose of such a mapping */
+	void (*unmap)(struct irq_host *h, unsigned int virq);
+
+	/* Update of such a mapping  */
+	void (*remap)(struct irq_host *h, unsigned int virq, irq_hw_number_t hw);
+
+	/* Translate device-tree interrupt specifier from raw format coming
+	 * from the firmware to a irq_hw_number_t (interrupt line number) and
+	 * type (sense) that can be passed to set_irq_type(). In the absence
+	 * of this callback, irq_create_of_mapping() and irq_of_parse_and_map()
+	 * will return the hw number in the first cell and IRQ_TYPE_NONE for
+	 * the type (which amount to keeping whatever default value the
+	 * interrupt controller has for that line)
+	 */
+	int (*xlate)(struct irq_host *h, struct device_node *ctrler,
+		     u32 *intspec, unsigned int intsize,
+		     irq_hw_number_t *out_hwirq, unsigned int *out_type);
+};
+
+struct irq_host {
+	struct list_head	link;
+
+	/* type of reverse mapping technique */
+	unsigned int		revmap_type;
+#define IRQ_HOST_MAP_LEGACY     0 /* legacy 8259, gets irqs 1..15 */
+#define IRQ_HOST_MAP_NOMAP	1 /* no fast reverse mapping */
+#define IRQ_HOST_MAP_LINEAR	2 /* linear map of interrupts */
+#define IRQ_HOST_MAP_TREE	3 /* radix tree */
+	union {
+		struct {
+			unsigned int size;
+			unsigned int *revmap;
+		} linear;
+		struct radix_tree_root tree;
+	} revmap_data;
+	struct irq_host_ops	*ops;
+	void			*host_data;
+	irq_hw_number_t		inval_irq;
+
+	/* Optional device node pointer */
+	struct device_node	*of_node;
+};
+
+/* The main irq map itself is an array of NR_IRQ entries containing the
+ * associate host and irq number. An entry with a host of NULL is free.
+ * An entry can be allocated if it's free, the allocator always then sets
+ * hwirq first to the host's invalid irq number and then fills ops.
+ */
+struct irq_map_entry {
+	irq_hw_number_t	hwirq;
+	struct irq_host	*host;
+};
+
+extern struct irq_map_entry irq_map[NR_IRQS];
+
+extern irq_hw_number_t virq_to_hw(unsigned int virq);
+
+/**
+ * irq_alloc_host - Allocate a new irq_host data structure
+ * @of_node: optional device-tree node of the interrupt controller
+ * @revmap_type: type of reverse mapping to use
+ * @revmap_arg: for IRQ_HOST_MAP_LINEAR linear only: size of the map
+ * @ops: map/unmap host callbacks
+ * @inval_irq: provide a hw number in that host space that is always invalid
+ *
+ * Allocates and initialize and irq_host structure. Note that in the case of
+ * IRQ_HOST_MAP_LEGACY, the map() callback will be called before this returns
+ * for all legacy interrupts except 0 (which is always the invalid irq for
+ * a legacy controller). For a IRQ_HOST_MAP_LINEAR, the map is allocated by
+ * this call as well. For a IRQ_HOST_MAP_TREE, the radix tree will be allocated
+ * later during boot automatically (the reverse mapping will use the slow path
+ * until that happens).
+ */
+extern struct irq_host *irq_alloc_host(struct device_node *of_node,
+				       unsigned int revmap_type,
+				       unsigned int revmap_arg,
+				       struct irq_host_ops *ops,
+				       irq_hw_number_t inval_irq);
+
+
+/**
+ * irq_find_host - Locates a host for a given device node
+ * @node: device-tree node of the interrupt controller
+ */
+extern struct irq_host *irq_find_host(struct device_node *node);
+
+
+/**
+ * irq_set_default_host - Set a "default" host
+ * @host: default host pointer
+ *
+ * For convenience, it's possible to set a "default" host that will be used
+ * whenever NULL is passed to irq_create_mapping(). It makes life easier for
+ * platforms that want to manipulate a few hard coded interrupt numbers that
+ * aren't properly represented in the device-tree.
+ */
+extern void irq_set_default_host(struct irq_host *host);
+
+
+/**
+ * irq_set_virq_count - Set the maximum number of virt irqs
+ * @count: number of linux virtual irqs, capped with NR_IRQS
+ *
+ * This is mainly for use by platforms like iSeries who want to program
+ * the virtual irq number in the controller to avoid the reverse mapping
+ */
+extern void irq_set_virq_count(unsigned int count);
+
+
+/**
+ * irq_create_mapping - Map a hardware interrupt into linux virq space
+ * @host: host owning this hardware interrupt or NULL for default host
+ * @hwirq: hardware irq number in that host space
+ *
+ * Only one mapping per hardware interrupt is permitted. Returns a linux
+ * virq number.
+ * If the sense/trigger is to be specified, set_irq_type() should be called
+ * on the number returned from that call.
+ */
+extern unsigned int irq_create_mapping(struct irq_host *host,
+				       irq_hw_number_t hwirq);
+
+
+/**
+ * irq_dispose_mapping - Unmap an interrupt
+ * @virq: linux virq number of the interrupt to unmap
+ */
+extern void irq_dispose_mapping(unsigned int virq);
+
+/**
+ * irq_find_mapping - Find a linux virq from an hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a slow path, for use by generic code. It's expected that an
+ * irq controller implementation directly calls the appropriate low level
+ * mapping function.
+ */
+extern unsigned int irq_find_mapping(struct irq_host *host,
+				     irq_hw_number_t hwirq);
+
+/**
+ * irq_create_direct_mapping - Allocate a virq for direct mapping
+ * @host: host to allocate the virq for or NULL for default host
+ *
+ * This routine is used for irq controllers which can choose the hardware
+ * interrupt numbers they generate. In such a case it's simplest to use
+ * the linux virq as the hardware interrupt number.
+ */
+extern unsigned int irq_create_direct_mapping(struct irq_host *host);
+
+/**
+ * irq_radix_revmap - Find a linux virq from a hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a fast path, for use by irq controller code that uses radix tree
+ * revmaps
+ */
+extern unsigned int irq_radix_revmap(struct irq_host *host,
+				     irq_hw_number_t hwirq);
+
+/**
+ * irq_linear_revmap - Find a linux virq from a hw irq number.
+ * @host: host owning this hardware interrupt
+ * @hwirq: hardware irq number in that host space
+ *
+ * This is a fast path, for use by irq controller code that uses linear
+ * revmaps. It does fallback to the slow path if the revmap doesn't exist
+ * yet and will create the revmap entry with appropriate locking
+ */
+
+extern unsigned int irq_linear_revmap(struct irq_host *host,
+				      irq_hw_number_t hwirq);
+
+
+
+/**
+ * irq_alloc_virt - Allocate virtual irq numbers
+ * @host: host owning these new virtual irqs
+ * @count: number of consecutive numbers to allocate
+ * @hint: pass a hint number, the allocator will try to use a 1:1 mapping
+ *
+ * This is a low level function that is used internally by irq_create_mapping()
+ * and that can be used by some irq controllers implementations for things
+ * like allocating ranges of numbers for MSIs. The revmaps are left untouched.
+ */
+extern unsigned int irq_alloc_virt(struct irq_host *host,
+				   unsigned int count,
+				   unsigned int hint);
+
+/**
+ * irq_free_virt - Free virtual irq numbers
+ * @virq: virtual irq number of the first interrupt to free
+ * @count: number of interrupts to free
+ *
+ * This function is the opposite of irq_alloc_virt. It will not clear reverse
+ * maps, this should be done previously by unmap'ing the interrupt. In fact,
+ * all interrupts covered by the range being freed should have been unmapped
+ * prior to calling this.
+ */
+extern void irq_free_virt(unsigned int virq, unsigned int count);
+
+
+/* -- OF helpers -- */
+
+/* irq_create_of_mapping - Map a hardware interrupt into linux virq space
+ * @controller: Device node of the interrupt controller
+ * @inspec: Interrupt specifier from the device-tree
+ * @intsize: Size of the interrupt specifier from the device-tree
+ *
+ * This function is identical to irq_create_mapping except that it takes
+ * as input informations straight from the device-tree (typically the results
+ * of the of_irq_map_*() functions.
+ */
+extern unsigned int irq_create_of_mapping(struct device_node *controller,
+					  u32 *intspec, unsigned int intsize);
+
+
+/* irq_of_parse_and_map - Parse nad Map an interrupt into linux virq space
+ * @device: Device node of the device whose interrupt is to be mapped
+ * @index: Index of the interrupt to map
+ *
+ * This function is a wrapper that chains of_irq_map_one() and
+ * irq_create_of_mapping() to make things easier to callers
+ */
+extern unsigned int irq_of_parse_and_map(struct device_node *dev, int index);
+
+/* -- End OF helpers -- */
+
+/**
+ * irq_early_init - Init irq remapping subsystem
+ */
+extern void irq_early_init(void);
+
+static __inline__ int irq_canonicalize(int irq)
+{
+	return irq;
+}
+
+extern int distribute_irqs;
+
+struct irqaction;
+struct pt_regs;
+
+#define __ARCH_HAS_DO_SOFTIRQ
+
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+/*
+ * Per-cpu stacks for handling critical, debug and machine check
+ * level interrupts.
+ */
+extern struct thread_info *critirq_ctx[NR_CPUS];
+extern struct thread_info *dbgirq_ctx[NR_CPUS];
+extern struct thread_info *mcheckirq_ctx[NR_CPUS];
+extern void exc_lvl_ctx_init(void);
+#else
+#define exc_lvl_ctx_init()
+#endif
+
+#ifdef CONFIG_IRQSTACKS
+/*
+ * Per-cpu stacks for handling hard and soft interrupts.
+ */
+extern struct thread_info *hardirq_ctx[NR_CPUS];
+extern struct thread_info *softirq_ctx[NR_CPUS];
+
+extern void irq_ctx_init(void);
+extern void call_do_softirq(struct thread_info *tp);
+extern int call_handle_irq(int irq, void *p1,
+			   struct thread_info *tp, void *func);
+#else
+#define irq_ctx_init()
+
+#endif /* CONFIG_IRQSTACKS */
+
+extern void do_IRQ(struct pt_regs *regs);
+
+#endif /* _ASM_IRQ_H */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/irq_regs.h b/arch/powerpc/include/asm/irq_regs.h
new file mode 100644
index 000000000000..ba94b51a0a70
--- /dev/null
+++ b/arch/powerpc/include/asm/irq_regs.h
@@ -0,0 +1,2 @@
+#include <asm-generic/irq_regs.h>
+
diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h
new file mode 100644
index 000000000000..17ba3a881bfd
--- /dev/null
+++ b/arch/powerpc/include/asm/irqflags.h
@@ -0,0 +1,42 @@
+/*
+ * IRQ flags handling
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+/*
+ * Get definitions for raw_local_save_flags(x), etc.
+ */
+#include <asm/hw_irq.h>
+
+#else
+#ifdef CONFIG_TRACE_IRQFLAGS
+/*
+ * Most of the CPU's IRQ-state tracing is done from assembly code; we
+ * have to call a C function so call a wrapper that saves all the
+ * C-clobbered registers.
+ */
+#define TRACE_ENABLE_INTS	bl .trace_hardirqs_on
+#define TRACE_DISABLE_INTS	bl .trace_hardirqs_off
+#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)	\
+	cmpdi	en, 0;				\
+	bne	95f;				\
+	stb	en,PACASOFTIRQEN(r13);		\
+	bl	.trace_hardirqs_off;		\
+	b	skip;				\
+95:	bl	.trace_hardirqs_on;		\
+	li	en,1;
+#define TRACE_AND_RESTORE_IRQ(en)		\
+	TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f);	\
+96:	stb	en,PACASOFTIRQEN(r13)
+#else
+#define TRACE_ENABLE_INTS
+#define TRACE_DISABLE_INTS
+#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)
+#define TRACE_AND_RESTORE_IRQ(en)		\
+	stb	en,PACASOFTIRQEN(r13)
+#endif
+#endif
+
+#endif
diff --git a/arch/powerpc/include/asm/iseries/alpaca.h b/arch/powerpc/include/asm/iseries/alpaca.h
new file mode 100644
index 000000000000..c0cce6727a69
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/alpaca.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright © 2008  Stephen Rothwell IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_ALPACA_H
+#define _ASM_POWERPC_ISERIES_ALPACA_H
+
+/*
+ * This is the part of the paca that the iSeries hypervisor
+ * needs to be statically initialised. Immediately after boot
+ * we switch to the normal Linux paca.
+ */
+struct alpaca {
+	struct lppaca *lppaca_ptr;	/* Pointer to LpPaca for PLIC */
+	const void *reg_save_ptr;	/* Pointer to LpRegSave for PLIC */
+};
+
+#endif /* _ASM_POWERPC_ISERIES_ALPACA_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_call.h b/arch/powerpc/include/asm/iseries/hv_call.h
new file mode 100644
index 000000000000..162d653ad51f
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_call.h
@@ -0,0 +1,111 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * This file contains the "hypervisor call" interface which is used to
+ * drive the hypervisor from the OS.
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_CALL_H
+#define _ASM_POWERPC_ISERIES_HV_CALL_H
+
+#include <asm/iseries/hv_call_sc.h>
+#include <asm/iseries/hv_types.h>
+#include <asm/paca.h>
+
+/* Type of yield for HvCallBaseYieldProcessor */
+#define HvCall_YieldTimed	0	/* Yield until specified time (tb) */
+#define HvCall_YieldToActive	1	/* Yield until all active procs have run */
+#define HvCall_YieldToProc	2	/* Yield until the specified processor has run */
+
+/* interrupt masks for setEnabledInterrupts */
+#define HvCall_MaskIPI		0x00000001
+#define HvCall_MaskLpEvent	0x00000002
+#define HvCall_MaskLpProd	0x00000004
+#define HvCall_MaskTimeout	0x00000008
+
+/* Log buffer formats */
+#define HvCall_LogBuffer_ASCII          0
+#define HvCall_LogBuffer_EBCDIC         1
+
+#define HvCallBaseAckDeferredInts			HvCallBase +  0
+#define HvCallBaseCpmPowerOff				HvCallBase +  1
+#define HvCallBaseGetHwPatch				HvCallBase +  2
+#define HvCallBaseReIplSpAttn				HvCallBase +  3
+#define HvCallBaseSetASR				HvCallBase +  4
+#define HvCallBaseSetASRAndRfi				HvCallBase +  5
+#define HvCallBaseSetIMR				HvCallBase +  6
+#define HvCallBaseSendIPI				HvCallBase +  7
+#define HvCallBaseTerminateMachine			HvCallBase +  8
+#define HvCallBaseTerminateMachineSrc			HvCallBase +  9
+#define HvCallBaseProcessPlicInterrupts			HvCallBase + 10
+#define HvCallBaseIsPrimaryCpmOrMsdIpl			HvCallBase + 11
+#define HvCallBaseSetVirtualSIT				HvCallBase + 12
+#define HvCallBaseVaryOffThisProcessor			HvCallBase + 13
+#define HvCallBaseVaryOffMemoryChunk			HvCallBase + 14
+#define HvCallBaseVaryOffInteractivePercentage		HvCallBase + 15
+#define HvCallBaseSendLpProd				HvCallBase + 16
+#define HvCallBaseSetEnabledInterrupts			HvCallBase + 17
+#define HvCallBaseYieldProcessor			HvCallBase + 18
+#define HvCallBaseVaryOffSharedProcUnits		HvCallBase + 19
+#define HvCallBaseSetVirtualDecr			HvCallBase + 20
+#define HvCallBaseClearLogBuffer			HvCallBase + 21
+#define HvCallBaseGetLogBufferCodePage			HvCallBase + 22
+#define HvCallBaseGetLogBufferFormat			HvCallBase + 23
+#define HvCallBaseGetLogBufferLength			HvCallBase + 24
+#define HvCallBaseReadLogBuffer				HvCallBase + 25
+#define HvCallBaseSetLogBufferFormatAndCodePage		HvCallBase + 26
+#define HvCallBaseWriteLogBuffer			HvCallBase + 27
+#define HvCallBaseRouter28				HvCallBase + 28
+#define HvCallBaseRouter29				HvCallBase + 29
+#define HvCallBaseRouter30				HvCallBase + 30
+#define HvCallBaseSetDebugBus				HvCallBase + 31
+
+#define HvCallCcSetDABR					HvCallCc + 7
+
+static inline void HvCall_setVirtualDecr(void)
+{
+	/*
+	 * Ignore any error return codes - most likely means that the
+	 * target value for the LP has been increased and this vary off
+	 * would bring us below the new target.
+	 */
+	HvCall0(HvCallBaseSetVirtualDecr);
+}
+
+static inline void HvCall_yieldProcessor(unsigned typeOfYield, u64 yieldParm)
+{
+	HvCall2(HvCallBaseYieldProcessor, typeOfYield, yieldParm);
+}
+
+static inline void HvCall_setEnabledInterrupts(u64 enabledInterrupts)
+{
+	HvCall1(HvCallBaseSetEnabledInterrupts, enabledInterrupts);
+}
+
+static inline void HvCall_setLogBufferFormatAndCodepage(int format,
+		u32 codePage)
+{
+	HvCall2(HvCallBaseSetLogBufferFormatAndCodePage, format, codePage);
+}
+
+extern void HvCall_writeLogBuffer(const void *buffer, u64 bufLen);
+
+static inline void HvCall_sendIPI(struct paca_struct *targetPaca)
+{
+	HvCall1(HvCallBaseSendIPI, targetPaca->paca_index);
+}
+
+#endif /* _ASM_POWERPC_ISERIES_HV_CALL_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_call_event.h b/arch/powerpc/include/asm/iseries/hv_call_event.h
new file mode 100644
index 000000000000..cc029d388e11
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_call_event.h
@@ -0,0 +1,201 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * This file contains the "hypervisor call" interface which is used to
+ * drive the hypervisor from the OS.
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H
+#define _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H
+
+#include <linux/types.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/iseries/hv_call_sc.h>
+#include <asm/iseries/hv_types.h>
+#include <asm/abs_addr.h>
+
+struct HvLpEvent;
+
+typedef u8 HvLpEvent_Type;
+typedef u8 HvLpEvent_AckInd;
+typedef u8 HvLpEvent_AckType;
+
+typedef u8 HvLpDma_Direction;
+typedef u8 HvLpDma_AddressType;
+
+typedef u64 HvLpEvent_Rc;
+typedef u64 HvLpDma_Rc;
+
+#define HvCallEventAckLpEvent				HvCallEvent +  0
+#define HvCallEventCancelLpEvent			HvCallEvent +  1
+#define HvCallEventCloseLpEventPath			HvCallEvent +  2
+#define HvCallEventDmaBufList				HvCallEvent +  3
+#define HvCallEventDmaSingle				HvCallEvent +  4
+#define HvCallEventDmaToSp				HvCallEvent +  5
+#define HvCallEventGetOverflowLpEvents			HvCallEvent +  6
+#define HvCallEventGetSourceLpInstanceId		HvCallEvent +  7
+#define HvCallEventGetTargetLpInstanceId		HvCallEvent +  8
+#define HvCallEventOpenLpEventPath			HvCallEvent +  9
+#define HvCallEventSetLpEventStack			HvCallEvent + 10
+#define HvCallEventSignalLpEvent			HvCallEvent + 11
+#define HvCallEventSignalLpEventParms			HvCallEvent + 12
+#define HvCallEventSetInterLpQueueIndex			HvCallEvent + 13
+#define HvCallEventSetLpEventQueueInterruptProc		HvCallEvent + 14
+#define HvCallEventRouter15				HvCallEvent + 15
+
+static inline void HvCallEvent_getOverflowLpEvents(u8 queueIndex)
+{
+	HvCall1(HvCallEventGetOverflowLpEvents, queueIndex);
+}
+
+static inline void HvCallEvent_setInterLpQueueIndex(u8 queueIndex)
+{
+	HvCall1(HvCallEventSetInterLpQueueIndex, queueIndex);
+}
+
+static inline void HvCallEvent_setLpEventStack(u8 queueIndex,
+		char *eventStackAddr, u32 eventStackSize)
+{
+	HvCall3(HvCallEventSetLpEventStack, queueIndex,
+			virt_to_abs(eventStackAddr), eventStackSize);
+}
+
+static inline void HvCallEvent_setLpEventQueueInterruptProc(u8 queueIndex,
+		u16 lpLogicalProcIndex)
+{
+	HvCall2(HvCallEventSetLpEventQueueInterruptProc, queueIndex,
+			lpLogicalProcIndex);
+}
+
+static inline HvLpEvent_Rc HvCallEvent_signalLpEvent(struct HvLpEvent *event)
+{
+	return HvCall1(HvCallEventSignalLpEvent, virt_to_abs(event));
+}
+
+static inline HvLpEvent_Rc HvCallEvent_signalLpEventFast(HvLpIndex targetLp,
+		HvLpEvent_Type type, u16 subtype, HvLpEvent_AckInd ackInd,
+		HvLpEvent_AckType ackType, HvLpInstanceId sourceInstanceId,
+		HvLpInstanceId targetInstanceId, u64 correlationToken,
+		u64 eventData1, u64 eventData2, u64 eventData3,
+		u64 eventData4, u64 eventData5)
+{
+	/* Pack the misc bits into a single Dword to pass to PLIC */
+	union {
+		struct {
+			u8		ack_and_target;
+			u8		type;
+			u16		subtype;
+			HvLpInstanceId	src_inst;
+			HvLpInstanceId	target_inst;
+		} parms;
+		u64		dword;
+	} packed;
+
+	packed.parms.ack_and_target = (ackType << 7) | (ackInd << 6) | targetLp;
+	packed.parms.type = type;
+	packed.parms.subtype = subtype;
+	packed.parms.src_inst = sourceInstanceId;
+	packed.parms.target_inst = targetInstanceId;
+
+	return HvCall7(HvCallEventSignalLpEventParms, packed.dword,
+			correlationToken, eventData1, eventData2,
+			eventData3, eventData4, eventData5);
+}
+
+extern void *iseries_hv_alloc(size_t size, dma_addr_t *dma_handle, gfp_t flag);
+extern void iseries_hv_free(size_t size, void *vaddr, dma_addr_t dma_handle);
+extern dma_addr_t iseries_hv_map(void *vaddr, size_t size,
+			enum dma_data_direction direction);
+extern void iseries_hv_unmap(dma_addr_t dma_handle, size_t size,
+			enum dma_data_direction direction);
+
+static inline HvLpEvent_Rc HvCallEvent_ackLpEvent(struct HvLpEvent *event)
+{
+	return HvCall1(HvCallEventAckLpEvent, virt_to_abs(event));
+}
+
+static inline HvLpEvent_Rc HvCallEvent_cancelLpEvent(struct HvLpEvent *event)
+{
+	return HvCall1(HvCallEventCancelLpEvent, virt_to_abs(event));
+}
+
+static inline HvLpInstanceId HvCallEvent_getSourceLpInstanceId(
+		HvLpIndex targetLp, HvLpEvent_Type type)
+{
+	return HvCall2(HvCallEventGetSourceLpInstanceId, targetLp, type);
+}
+
+static inline HvLpInstanceId HvCallEvent_getTargetLpInstanceId(
+		HvLpIndex targetLp, HvLpEvent_Type type)
+{
+	return HvCall2(HvCallEventGetTargetLpInstanceId, targetLp, type);
+}
+
+static inline void HvCallEvent_openLpEventPath(HvLpIndex targetLp,
+		HvLpEvent_Type type)
+{
+	HvCall2(HvCallEventOpenLpEventPath, targetLp, type);
+}
+
+static inline void HvCallEvent_closeLpEventPath(HvLpIndex targetLp,
+		HvLpEvent_Type type)
+{
+	HvCall2(HvCallEventCloseLpEventPath, targetLp, type);
+}
+
+static inline HvLpDma_Rc HvCallEvent_dmaBufList(HvLpEvent_Type type,
+		HvLpIndex remoteLp, HvLpDma_Direction direction,
+		HvLpInstanceId localInstanceId,
+		HvLpInstanceId remoteInstanceId,
+		HvLpDma_AddressType localAddressType,
+		HvLpDma_AddressType remoteAddressType,
+		/* Do these need to be converted to absolute addresses? */
+		u64 localBufList, u64 remoteBufList, u32 transferLength)
+{
+	/* Pack the misc bits into a single Dword to pass to PLIC */
+	union {
+		struct {
+			u8		flags;
+			HvLpIndex	remote;
+			u8		type;
+			u8		reserved;
+			HvLpInstanceId	local_inst;
+			HvLpInstanceId	remote_inst;
+		} parms;
+		u64		dword;
+	} packed;
+
+	packed.parms.flags = (direction << 7) |
+		(localAddressType << 6) | (remoteAddressType << 5);
+	packed.parms.remote = remoteLp;
+	packed.parms.type = type;
+	packed.parms.reserved = 0;
+	packed.parms.local_inst = localInstanceId;
+	packed.parms.remote_inst = remoteInstanceId;
+
+	return HvCall4(HvCallEventDmaBufList, packed.dword, localBufList,
+			remoteBufList, transferLength);
+}
+
+static inline HvLpDma_Rc HvCallEvent_dmaToSp(void *local, u32 remote,
+		u32 length, HvLpDma_Direction dir)
+{
+	return HvCall4(HvCallEventDmaToSp, virt_to_abs(local), remote,
+			length, dir);
+}
+
+#endif /* _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_call_sc.h b/arch/powerpc/include/asm/iseries/hv_call_sc.h
new file mode 100644
index 000000000000..f5d210959250
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_call_sc.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_CALL_SC_H
+#define _ASM_POWERPC_ISERIES_HV_CALL_SC_H
+
+#include <linux/types.h>
+
+#define HvCallBase		0x8000000000000000ul
+#define HvCallCc		0x8001000000000000ul
+#define HvCallCfg		0x8002000000000000ul
+#define HvCallEvent		0x8003000000000000ul
+#define HvCallHpt		0x8004000000000000ul
+#define HvCallPci		0x8005000000000000ul
+#define HvCallSm		0x8007000000000000ul
+#define HvCallXm		0x8009000000000000ul
+
+extern u64 HvCall0(u64);
+extern u64 HvCall1(u64, u64);
+extern u64 HvCall2(u64, u64, u64);
+extern u64 HvCall3(u64, u64, u64, u64);
+extern u64 HvCall4(u64, u64, u64, u64, u64);
+extern u64 HvCall5(u64, u64, u64, u64, u64, u64);
+extern u64 HvCall6(u64, u64, u64, u64, u64, u64, u64);
+extern u64 HvCall7(u64, u64, u64, u64, u64, u64, u64, u64);
+
+extern u64 HvCall0Ret16(u64, void *);
+extern u64 HvCall1Ret16(u64, void *, u64);
+extern u64 HvCall2Ret16(u64, void *, u64, u64);
+extern u64 HvCall3Ret16(u64, void *, u64, u64, u64);
+extern u64 HvCall4Ret16(u64, void *, u64, u64, u64, u64);
+extern u64 HvCall5Ret16(u64, void *, u64, u64, u64, u64, u64);
+extern u64 HvCall6Ret16(u64, void *, u64, u64, u64, u64, u64, u64);
+extern u64 HvCall7Ret16(u64, void *, u64, u64 ,u64 ,u64 ,u64 ,u64 ,u64);
+
+#endif /* _ASM_POWERPC_ISERIES_HV_CALL_SC_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_call_xm.h b/arch/powerpc/include/asm/iseries/hv_call_xm.h
new file mode 100644
index 000000000000..392ac3f54df0
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_call_xm.h
@@ -0,0 +1,61 @@
+/*
+ * This file contains the "hypervisor call" interface which is used to
+ * drive the hypervisor from SLIC.
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_CALL_XM_H
+#define _ASM_POWERPC_ISERIES_HV_CALL_XM_H
+
+#include <asm/iseries/hv_call_sc.h>
+#include <asm/iseries/hv_types.h>
+
+#define HvCallXmGetTceTableParms	HvCallXm +  0
+#define HvCallXmTestBus			HvCallXm +  1
+#define HvCallXmConnectBusUnit		HvCallXm +  2
+#define HvCallXmLoadTod			HvCallXm +  8
+#define HvCallXmTestBusUnit		HvCallXm +  9
+#define HvCallXmSetTce			HvCallXm + 11
+#define HvCallXmSetTces			HvCallXm + 13
+
+static inline void HvCallXm_getTceTableParms(u64 cb)
+{
+	HvCall1(HvCallXmGetTceTableParms, cb);
+}
+
+static inline u64 HvCallXm_setTce(u64 tceTableToken, u64 tceOffset, u64 tce)
+{
+	return HvCall3(HvCallXmSetTce, tceTableToken, tceOffset, tce);
+}
+
+static inline u64 HvCallXm_setTces(u64 tceTableToken, u64 tceOffset,
+		u64 numTces, u64 tce1, u64 tce2, u64 tce3, u64 tce4)
+{
+	return HvCall7(HvCallXmSetTces, tceTableToken, tceOffset, numTces,
+			     tce1, tce2, tce3, tce4);
+}
+
+static inline u64 HvCallXm_testBus(u16 busNumber)
+{
+	return HvCall1(HvCallXmTestBus, busNumber);
+}
+
+static inline u64 HvCallXm_testBusUnit(u16 busNumber, u8 subBusNumber,
+		u8 deviceId)
+{
+	return HvCall2(HvCallXmTestBusUnit, busNumber,
+			(subBusNumber << 8) | deviceId);
+}
+
+static inline u64 HvCallXm_connectBusUnit(u16 busNumber, u8 subBusNumber,
+		u8 deviceId, u64 interruptToken)
+{
+	return HvCall5(HvCallXmConnectBusUnit, busNumber,
+			(subBusNumber << 8) | deviceId, interruptToken, 0,
+			0 /* HvLpConfig::mapDsaToQueueIndex(HvLpDSA(busNumber, xBoard, xCard)) */);
+}
+
+static inline u64 HvCallXm_loadTod(void)
+{
+	return HvCall0(HvCallXmLoadTod);
+}
+
+#endif /* _ASM_POWERPC_ISERIES_HV_CALL_XM_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_lp_config.h b/arch/powerpc/include/asm/iseries/hv_lp_config.h
new file mode 100644
index 000000000000..a006fd1e4a2c
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_lp_config.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H
+#define _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H
+
+/*
+ * This file contains the interface to the LPAR configuration data
+ * to determine which resources should be allocated to each partition.
+ */
+
+#include <asm/iseries/hv_call_sc.h>
+#include <asm/iseries/hv_types.h>
+
+enum {
+	HvCallCfg_Cur	= 0,
+	HvCallCfg_Init	= 1,
+	HvCallCfg_Max	= 2,
+	HvCallCfg_Min	= 3
+};
+
+#define HvCallCfgGetSystemPhysicalProcessors		HvCallCfg +  6
+#define HvCallCfgGetPhysicalProcessors			HvCallCfg +  7
+#define HvCallCfgGetMsChunks				HvCallCfg +  9
+#define HvCallCfgGetSharedPoolIndex			HvCallCfg + 20
+#define HvCallCfgGetSharedProcUnits			HvCallCfg + 21
+#define HvCallCfgGetNumProcsInSharedPool		HvCallCfg + 22
+#define HvCallCfgGetVirtualLanIndexMap			HvCallCfg + 30
+#define HvCallCfgGetHostingLpIndex			HvCallCfg + 32
+
+extern HvLpIndex HvLpConfig_getLpIndex_outline(void);
+extern HvLpIndex HvLpConfig_getLpIndex(void);
+extern HvLpIndex HvLpConfig_getPrimaryLpIndex(void);
+
+static inline u64 HvLpConfig_getMsChunks(void)
+{
+	return HvCall2(HvCallCfgGetMsChunks, HvLpConfig_getLpIndex(),
+			HvCallCfg_Cur);
+}
+
+static inline u64 HvLpConfig_getSystemPhysicalProcessors(void)
+{
+	return HvCall0(HvCallCfgGetSystemPhysicalProcessors);
+}
+
+static inline u64 HvLpConfig_getNumProcsInSharedPool(HvLpSharedPoolIndex sPI)
+{
+	return (u16)HvCall1(HvCallCfgGetNumProcsInSharedPool, sPI);
+}
+
+static inline u64 HvLpConfig_getPhysicalProcessors(void)
+{
+	return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(),
+			HvCallCfg_Cur);
+}
+
+static inline HvLpSharedPoolIndex HvLpConfig_getSharedPoolIndex(void)
+{
+	return HvCall1(HvCallCfgGetSharedPoolIndex, HvLpConfig_getLpIndex());
+}
+
+static inline u64 HvLpConfig_getSharedProcUnits(void)
+{
+	return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(),
+			HvCallCfg_Cur);
+}
+
+static inline u64 HvLpConfig_getMaxSharedProcUnits(void)
+{
+	return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(),
+			HvCallCfg_Max);
+}
+
+static inline u64 HvLpConfig_getMaxPhysicalProcessors(void)
+{
+	return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(),
+			HvCallCfg_Max);
+}
+
+static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMapForLp(
+		HvLpIndex lp)
+{
+	/*
+	 * This is a new function in V5R1 so calls to this on older
+	 * hypervisors will return -1
+	 */
+	u64 retVal = HvCall1(HvCallCfgGetVirtualLanIndexMap, lp);
+	if (retVal == -1)
+		retVal = 0;
+	return retVal;
+}
+
+static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMap(void)
+{
+	return HvLpConfig_getVirtualLanIndexMapForLp(
+			HvLpConfig_getLpIndex_outline());
+}
+
+static inline int HvLpConfig_doLpsCommunicateOnVirtualLan(HvLpIndex lp1,
+		HvLpIndex lp2)
+{
+	HvLpVirtualLanIndexMap virtualLanIndexMap1 =
+		HvLpConfig_getVirtualLanIndexMapForLp(lp1);
+	HvLpVirtualLanIndexMap virtualLanIndexMap2 =
+		HvLpConfig_getVirtualLanIndexMapForLp(lp2);
+	return ((virtualLanIndexMap1 & virtualLanIndexMap2) != 0);
+}
+
+static inline HvLpIndex HvLpConfig_getHostingLpIndex(HvLpIndex lp)
+{
+	return HvCall1(HvCallCfgGetHostingLpIndex, lp);
+}
+
+#endif /* _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_lp_event.h b/arch/powerpc/include/asm/iseries/hv_lp_event.h
new file mode 100644
index 000000000000..8f5da7d77202
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_lp_event.h
@@ -0,0 +1,162 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+/* This file contains the class for HV events in the system. */
+
+#ifndef _ASM_POWERPC_ISERIES_HV_LP_EVENT_H
+#define _ASM_POWERPC_ISERIES_HV_LP_EVENT_H
+
+#include <asm/types.h>
+#include <asm/ptrace.h>
+#include <asm/iseries/hv_types.h>
+#include <asm/iseries/hv_call_event.h>
+
+/*
+ * HvLpEvent is the structure for Lp Event messages passed between
+ * partitions through PLIC.
+ */
+
+struct HvLpEvent {
+	u8	flags;			/* Event flags		      x00-x00 */
+	u8	xType;			/* Type of message	      x01-x01 */
+	u16	xSubtype;		/* Subtype for event	      x02-x03 */
+	u8	xSourceLp;		/* Source LP		      x04-x04 */
+	u8	xTargetLp;		/* Target LP		      x05-x05 */
+	u8	xSizeMinus1;		/* Size of Derived class - 1  x06-x06 */
+	u8	xRc;			/* RC for Ack flows	      x07-x07 */
+	u16	xSourceInstanceId;	/* Source sides instance id   x08-x09 */
+	u16	xTargetInstanceId;	/* Target sides instance id   x0A-x0B */
+	union {
+		u32	xSubtypeData;	/* Data usable by the subtype x0C-x0F */
+		u16	xSubtypeDataShort[2];	/* Data as 2 shorts */
+		u8	xSubtypeDataChar[4];	/* Data as 4 chars */
+	} x;
+
+	u64	xCorrelationToken;	/* Unique value for source/type x10-x17 */
+};
+
+typedef void (*LpEventHandler)(struct HvLpEvent *);
+
+/* Register a handler for an event type - returns 0 on success */
+extern int HvLpEvent_registerHandler(HvLpEvent_Type eventType,
+		LpEventHandler hdlr);
+
+/*
+ * Unregister a handler for an event type
+ *
+ * This call will sleep until the handler being removed is guaranteed to
+ * be no longer executing on any CPU. Do not call with locks held.
+ *
+ *  returns 0 on success
+ *  Unregister will fail if there are any paths open for the type
+ */
+extern int HvLpEvent_unregisterHandler(HvLpEvent_Type eventType);
+
+/*
+ * Open an Lp Event Path for an event type
+ * returns 0 on success
+ * openPath will fail if there is no handler registered for the event type.
+ * The lpIndex specified is the partition index for the target partition
+ * (for VirtualIo, VirtualLan and SessionMgr) other types specify zero)
+ */
+extern int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
+
+/*
+ * Close an Lp Event Path for a type and partition
+ * returns 0 on success
+ */
+extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
+
+#define HvLpEvent_Type_Hypervisor 0
+#define HvLpEvent_Type_MachineFac 1
+#define HvLpEvent_Type_SessionMgr 2
+#define HvLpEvent_Type_SpdIo      3
+#define HvLpEvent_Type_VirtualBus 4
+#define HvLpEvent_Type_PciIo      5
+#define HvLpEvent_Type_RioIo      6
+#define HvLpEvent_Type_VirtualLan 7
+#define HvLpEvent_Type_VirtualIo  8
+#define HvLpEvent_Type_NumTypes   9
+
+#define HvLpEvent_Rc_Good 0
+#define HvLpEvent_Rc_BufferNotAvailable 1
+#define HvLpEvent_Rc_Cancelled 2
+#define HvLpEvent_Rc_GenericError 3
+#define HvLpEvent_Rc_InvalidAddress 4
+#define HvLpEvent_Rc_InvalidPartition 5
+#define HvLpEvent_Rc_InvalidSize 6
+#define HvLpEvent_Rc_InvalidSubtype 7
+#define HvLpEvent_Rc_InvalidSubtypeData 8
+#define HvLpEvent_Rc_InvalidType 9
+#define HvLpEvent_Rc_PartitionDead 10
+#define HvLpEvent_Rc_PathClosed 11
+#define HvLpEvent_Rc_SubtypeError 12
+
+#define HvLpEvent_Function_Ack 0
+#define HvLpEvent_Function_Int 1
+
+#define HvLpEvent_AckInd_NoAck 0
+#define HvLpEvent_AckInd_DoAck 1
+
+#define HvLpEvent_AckType_ImmediateAck 0
+#define HvLpEvent_AckType_DeferredAck 1
+
+#define HV_LP_EVENT_INT			0x01
+#define HV_LP_EVENT_DO_ACK		0x02
+#define HV_LP_EVENT_DEFERRED_ACK	0x04
+#define HV_LP_EVENT_VALID		0x80
+
+#define HvLpDma_Direction_LocalToRemote 0
+#define HvLpDma_Direction_RemoteToLocal 1
+
+#define HvLpDma_AddressType_TceIndex 0
+#define HvLpDma_AddressType_RealAddress 1
+
+#define HvLpDma_Rc_Good 0
+#define HvLpDma_Rc_Error 1
+#define HvLpDma_Rc_PartitionDead 2
+#define HvLpDma_Rc_PathClosed 3
+#define HvLpDma_Rc_InvalidAddress 4
+#define HvLpDma_Rc_InvalidLength 5
+
+static inline int hvlpevent_is_valid(struct HvLpEvent *h)
+{
+	return h->flags & HV_LP_EVENT_VALID;
+}
+
+static inline void hvlpevent_invalidate(struct HvLpEvent *h)
+{
+	h->flags &= ~ HV_LP_EVENT_VALID;
+}
+
+static inline int hvlpevent_is_int(struct HvLpEvent *h)
+{
+	return h->flags & HV_LP_EVENT_INT;
+}
+
+static inline int hvlpevent_is_ack(struct HvLpEvent *h)
+{
+	return !hvlpevent_is_int(h);
+}
+
+static inline int hvlpevent_need_ack(struct HvLpEvent *h)
+{
+	return h->flags & HV_LP_EVENT_DO_ACK;
+}
+
+#endif /* _ASM_POWERPC_ISERIES_HV_LP_EVENT_H */
diff --git a/arch/powerpc/include/asm/iseries/hv_types.h b/arch/powerpc/include/asm/iseries/hv_types.h
new file mode 100644
index 000000000000..c3e6d2a1d1c3
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/hv_types.h
@@ -0,0 +1,112 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_HV_TYPES_H
+#define _ASM_POWERPC_ISERIES_HV_TYPES_H
+
+/*
+ * General typedefs for the hypervisor.
+ */
+
+#include <asm/types.h>
+
+typedef u8	HvLpIndex;
+typedef u16	HvLpInstanceId;
+typedef u64	HvLpTOD;
+typedef u64	HvLpSystemSerialNum;
+typedef u8	HvLpDeviceSerialNum[12];
+typedef u16	HvLpSanHwSet;
+typedef u16	HvLpBus;
+typedef u16	HvLpBoard;
+typedef u16	HvLpCard;
+typedef u8	HvLpDeviceType[4];
+typedef u8	HvLpDeviceModel[3];
+typedef u64	HvIoToken;
+typedef u8	HvLpName[8];
+typedef u32	HvIoId;
+typedef u64	HvRealMemoryIndex;
+typedef u32	HvLpIndexMap;	/* Must hold HVMAXARCHITECTEDLPS bits!!! */
+typedef u16	HvLpVrmIndex;
+typedef u32	HvXmGenerationId;
+typedef u8	HvLpBusPool;
+typedef u8	HvLpSharedPoolIndex;
+typedef u16	HvLpSharedProcUnitsX100;
+typedef u8	HvLpVirtualLanIndex;
+typedef u16	HvLpVirtualLanIndexMap;	/* Must hold HVMAXARCHITECTEDVIRTUALLANS bits!!! */
+typedef u16	HvBusNumber;	/* Hypervisor Bus Number */
+typedef u8	HvSubBusNumber;	/* Hypervisor SubBus Number */
+typedef u8	HvAgentId;	/* Hypervisor DevFn */
+
+
+#define HVMAXARCHITECTEDLPS		32
+#define HVMAXARCHITECTEDVIRTUALLANS	16
+#define HVMAXARCHITECTEDVIRTUALDISKS	32
+#define HVMAXARCHITECTEDVIRTUALCDROMS	8
+#define HVMAXARCHITECTEDVIRTUALTAPES	8
+#define HVCHUNKSIZE			(256 * 1024)
+#define HVPAGESIZE			(4 * 1024)
+#define HVLPMINMEGSPRIMARY		256
+#define HVLPMINMEGSSECONDARY		64
+#define HVCHUNKSPERMEG			4
+#define HVPAGESPERMEG			256
+#define HVPAGESPERCHUNK			64
+
+#define HvLpIndexInvalid		((HvLpIndex)0xff)
+
+/*
+ * Enums for the sub-components under PLIC
+ * Used in HvCall  and HvPrimaryCall
+ */
+enum {
+	HvCallCompId = 0,
+	HvCallCpuCtlsCompId = 1,
+	HvCallCfgCompId = 2,
+	HvCallEventCompId = 3,
+	HvCallHptCompId = 4,
+	HvCallPciCompId = 5,
+	HvCallSlmCompId = 6,
+	HvCallSmCompId = 7,
+	HvCallSpdCompId = 8,
+	HvCallXmCompId = 9,
+	HvCallRioCompId = 10,
+	HvCallRsvd3CompId = 11,
+	HvCallRsvd2CompId = 12,
+	HvCallRsvd1CompId = 13,
+	HvCallMaxCompId = 14,
+	HvPrimaryCallCompId = 0,
+	HvPrimaryCallCfgCompId = 1,
+	HvPrimaryCallPciCompId = 2,
+	HvPrimaryCallSmCompId = 3,
+	HvPrimaryCallSpdCompId = 4,
+	HvPrimaryCallXmCompId = 5,
+	HvPrimaryCallRioCompId = 6,
+	HvPrimaryCallRsvd7CompId = 7,
+	HvPrimaryCallRsvd6CompId = 8,
+	HvPrimaryCallRsvd5CompId = 9,
+	HvPrimaryCallRsvd4CompId = 10,
+	HvPrimaryCallRsvd3CompId = 11,
+	HvPrimaryCallRsvd2CompId = 12,
+	HvPrimaryCallRsvd1CompId = 13,
+	HvPrimaryCallMaxCompId = HvCallMaxCompId
+};
+
+struct HvLpBufferList {
+	u64 addr;
+	u64 len;
+};
+
+#endif /* _ASM_POWERPC_ISERIES_HV_TYPES_H */
diff --git a/arch/powerpc/include/asm/iseries/iommu.h b/arch/powerpc/include/asm/iseries/iommu.h
new file mode 100644
index 000000000000..c59ee7e4bed1
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/iommu.h
@@ -0,0 +1,41 @@
+#ifndef _ASM_POWERPC_ISERIES_IOMMU_H
+#define _ASM_POWERPC_ISERIES_IOMMU_H
+
+/*
+ * Copyright (C) 2005  Stephen Rothwell, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the:
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330,
+ * Boston, MA  02111-1307  USA
+ */
+
+struct pci_dev;
+struct vio_dev;
+struct device_node;
+struct iommu_table;
+
+/* Creates table for an individual device node */
+extern void iommu_devnode_init_iSeries(struct pci_dev *pdev,
+				       struct device_node *dn);
+
+/* Get table parameters from HV */
+extern void iommu_table_getparms_iSeries(unsigned long busno,
+		unsigned char slotno, unsigned char virtbus,
+		struct iommu_table *tbl);
+
+extern struct iommu_table *vio_build_iommu_table_iseries(struct vio_dev *dev);
+extern void iommu_vio_init(void);
+
+#endif /* _ASM_POWERPC_ISERIES_IOMMU_H */
diff --git a/arch/powerpc/include/asm/iseries/it_lp_queue.h b/arch/powerpc/include/asm/iseries/it_lp_queue.h
new file mode 100644
index 000000000000..428278838821
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/it_lp_queue.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H
+#define _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H
+
+/*
+ *	This control block defines the simple LP queue structure that is
+ *	shared between the hypervisor (PLIC) and the OS in order to send
+ *	events to an LP.
+ */
+
+#include <asm/types.h>
+#include <asm/ptrace.h>
+
+#define IT_LP_MAX_QUEUES	8
+
+#define IT_LP_NOT_USED		0	/* Queue will not be used by PLIC */
+#define IT_LP_DEDICATED_IO	1	/* Queue dedicated to IO processor specified */
+#define IT_LP_DEDICATED_LP	2	/* Queue dedicated to LP specified */
+#define IT_LP_SHARED		3	/* Queue shared for both IO and LP */
+
+#define IT_LP_EVENT_STACK_SIZE	4096
+#define IT_LP_EVENT_MAX_SIZE	256
+#define IT_LP_EVENT_ALIGN	64
+
+struct hvlpevent_queue {
+/*
+ * The hq_current_event is the pointer to the next event stack entry
+ * that will become valid.  The OS must peek at this entry to determine
+ * if it is valid.  PLIC will set the valid indicator as the very last
+ * store into that entry.
+ *
+ * When the OS has completed processing of the event then it will mark
+ * the event as invalid so that PLIC knows it can store into that event
+ * location again.
+ *
+ * If the event stack fills and there are overflow events, then PLIC
+ * will set the hq_overflow_pending flag in which case the OS will
+ * have to fetch the additional LP events once they have drained the
+ * event stack.
+ *
+ * The first 16-bytes are known by both the OS and PLIC.  The remainder
+ * of the cache line is for use by the OS.
+ */
+	u8		hq_overflow_pending;	/* 0x00 Overflow events are pending */
+	u8		hq_status;		/* 0x01 DedicatedIo or DedicatedLp or NotUsed */
+	u16		hq_proc_index;		/* 0x02 Logical Proc Index for correlation */
+	u8		hq_reserved1[12];	/* 0x04 */
+	char		*hq_current_event;	/* 0x10 */
+	char		*hq_last_event;		/* 0x18 */
+	char		*hq_event_stack;	/* 0x20 */
+	u8		hq_index;		/* 0x28 unique sequential index. */
+	u8		hq_reserved2[3];	/* 0x29-2b */
+	spinlock_t	hq_lock;
+};
+
+extern struct hvlpevent_queue hvlpevent_queue;
+
+extern int hvlpevent_is_pending(void);
+extern void process_hvlpevents(void);
+extern void setup_hvlpevent_queue(void);
+
+#endif /* _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H */
diff --git a/arch/powerpc/include/asm/iseries/lpar_map.h b/arch/powerpc/include/asm/iseries/lpar_map.h
new file mode 100644
index 000000000000..5e9f3e128ee2
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/lpar_map.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_LPAR_MAP_H
+#define _ASM_POWERPC_ISERIES_LPAR_MAP_H
+
+#ifndef __ASSEMBLY__
+
+#include <asm/types.h>
+
+#endif
+
+/*
+ * The iSeries hypervisor will set up mapping for one or more
+ * ESID/VSID pairs (in SLB/segment registers) and will set up
+ * mappings of one or more ranges of pages to VAs.
+ * We will have the hypervisor set up the ESID->VSID mapping
+ * for the four kernel segments (C-F).  With shared processors,
+ * the hypervisor will clear all segment registers and reload
+ * these four whenever the processor is switched from one
+ * partition to another.
+ */
+
+/* The Vsid and Esid identified below will be used by the hypervisor
+ * to set up a memory mapping for part of the load area before giving
+ * control to the Linux kernel.  The load area is 64 MB, but this must
+ * not attempt to map the whole load area.  The Hashed Page Table may
+ * need to be located within the load area (if the total partition size
+ * is 64 MB), but cannot be mapped.  Typically, this should specify
+ * to map half (32 MB) of the load area.
+ *
+ * The hypervisor will set up page table entries for the number of
+ * pages specified.
+ *
+ * In 32-bit mode, the hypervisor will load all four of the
+ * segment registers (identified by the low-order four bits of the
+ * Esid field.  In 64-bit mode, the hypervisor will load one SLB
+ * entry to map the Esid to the Vsid.
+*/
+
+#define HvEsidsToMap	2
+#define HvRangesToMap	1
+
+/* Hypervisor initially maps 32MB of the load area */
+#define HvPagesToMap	8192
+
+#ifndef __ASSEMBLY__
+struct LparMap {
+	u64	xNumberEsids;	// Number of ESID/VSID pairs
+	u64	xNumberRanges;	// Number of VA ranges to map
+	u64	xSegmentTableOffs; // Page number within load area of seg table
+	u64	xRsvd[5];
+	struct {
+		u64	xKernelEsid;	// Esid used to map kernel load
+		u64	xKernelVsid;	// Vsid used to map kernel load
+	} xEsids[HvEsidsToMap];
+	struct {
+		u64	xPages;		// Number of pages to be mapped
+		u64	xOffset;	// Offset from start of load area
+		u64	xVPN;		// Virtual Page Number
+	} xRanges[HvRangesToMap];
+};
+
+extern const struct LparMap	xLparMap;
+
+#endif /* __ASSEMBLY__ */
+
+/* the fixed address where the LparMap exists */
+#define LPARMAP_PHYS		0x7000
+
+#endif /* _ASM_POWERPC_ISERIES_LPAR_MAP_H */
diff --git a/arch/powerpc/include/asm/iseries/mf.h b/arch/powerpc/include/asm/iseries/mf.h
new file mode 100644
index 000000000000..eb851a9c9e5c
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/mf.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2001  Troy D. Armstrong IBM Corporation
+ * Copyright (C) 2004  Stephen Rothwell IBM Corporation
+ *
+ * This modules exists as an interface between a Linux secondary partition
+ * running on an iSeries and the primary partition's Virtual Service
+ * Processor (VSP) object.  The VSP has final authority over powering on/off
+ * all partitions in the iSeries.  It also provides miscellaneous low-level
+ * machine facility type operations.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_ISERIES_MF_H
+#define _ASM_POWERPC_ISERIES_MF_H
+
+#include <linux/types.h>
+
+#include <asm/iseries/hv_types.h>
+#include <asm/iseries/hv_call_event.h>
+
+struct rtc_time;
+
+typedef void (*MFCompleteHandler)(void *clientToken, int returnCode);
+
+extern void mf_allocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type,
+		unsigned size, unsigned amount, MFCompleteHandler hdlr,
+		void *userToken);
+extern void mf_deallocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type,
+		unsigned count, MFCompleteHandler hdlr, void *userToken);
+
+extern void mf_power_off(void);
+extern void mf_reboot(char *cmd);
+
+extern void mf_display_src(u32 word);
+extern void mf_display_progress(u16 value);
+
+extern void mf_init(void);
+
+#endif /* _ASM_POWERPC_ISERIES_MF_H */
diff --git a/arch/powerpc/include/asm/iseries/vio.h b/arch/powerpc/include/asm/iseries/vio.h
new file mode 100644
index 000000000000..f9ac0d00b951
--- /dev/null
+++ b/arch/powerpc/include/asm/iseries/vio.h
@@ -0,0 +1,265 @@
+/* -*- linux-c -*-
+ *
+ *  iSeries Virtual I/O Message Path header
+ *
+ *  Authors: Dave Boutcher <boutcher@us.ibm.com>
+ *           Ryan Arnold <ryanarn@us.ibm.com>
+ *           Colin Devilbiss <devilbis@us.ibm.com>
+ *
+ * (C) Copyright 2000 IBM Corporation
+ *
+ * This header file is used by the iSeries virtual I/O device
+ * drivers.  It defines the interfaces to the common functions
+ * (implemented in drivers/char/viopath.h) as well as defining
+ * common functions and structures.  Currently (at the time I
+ * wrote this comment) the iSeries virtual I/O device drivers
+ * that use this are
+ *   drivers/block/viodasd.c
+ *   drivers/char/viocons.c
+ *   drivers/char/viotape.c
+ *   drivers/cdrom/viocd.c
+ *
+ * The iSeries virtual ethernet support (veth.c) uses a whole
+ * different set of functions.
+ *
+ * This program is free software;  you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) anyu later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef _ASM_POWERPC_ISERIES_VIO_H
+#define _ASM_POWERPC_ISERIES_VIO_H
+
+#include <asm/iseries/hv_types.h>
+#include <asm/iseries/hv_lp_event.h>
+
+/*
+ * iSeries virtual I/O events use the subtype field in
+ * HvLpEvent to figure out what kind of vio event is coming
+ * in.  We use a table to route these, and this defines
+ * the maximum number of distinct subtypes
+ */
+#define VIO_MAX_SUBTYPES 8
+
+#define VIOMAXBLOCKDMA	12
+
+struct open_data {
+	u64	disk_size;
+	u16	max_disk;
+	u16	cylinders;
+	u16	tracks;
+	u16	sectors;
+	u16	bytes_per_sector;
+};
+
+struct rw_data {
+	u64	offset;
+	struct {
+		u32	token;
+		u32	reserved;
+		u64	len;
+	} dma_info[VIOMAXBLOCKDMA];
+};
+
+struct vioblocklpevent {
+	struct HvLpEvent	event;
+	u32			reserved;
+	u16			version;
+	u16			sub_result;
+	u16			disk;
+	u16			flags;
+	union {
+		struct open_data	open_data;
+		struct rw_data		rw_data;
+		u64			changed;
+	} u;
+};
+
+#define vioblockflags_ro   0x0001
+
+enum vioblocksubtype {
+	vioblockopen = 0x0001,
+	vioblockclose = 0x0002,
+	vioblockread = 0x0003,
+	vioblockwrite = 0x0004,
+	vioblockflush = 0x0005,
+	vioblockcheck = 0x0007
+};
+
+struct viocdlpevent {
+	struct HvLpEvent	event;
+	u32			reserved;
+	u16			version;
+	u16			sub_result;
+	u16			disk;
+	u16			flags;
+	u32			token;
+	u64			offset;		/* On open, max number of disks */
+	u64			len;		/* On open, size of the disk */
+	u32			block_size;	/* Only set on open */
+	u32			media_size;	/* Only set on open */
+};
+
+enum viocdsubtype {
+	viocdopen = 0x0001,
+	viocdclose = 0x0002,
+	viocdread = 0x0003,
+	viocdwrite = 0x0004,
+	viocdlockdoor = 0x0005,
+	viocdgetinfo = 0x0006,
+	viocdcheck = 0x0007
+};
+
+struct viotapelpevent {
+	struct HvLpEvent event;
+	u32 reserved;
+	u16 version;
+	u16 sub_type_result;
+	u16 tape;
+	u16 flags;
+	u32 token;
+	u64 len;
+	union {
+		struct {
+			u32 tape_op;
+			u32 count;
+		} op;
+		struct {
+			u32 type;
+			u32 resid;
+			u32 dsreg;
+			u32 gstat;
+			u32 erreg;
+			u32 file_no;
+			u32 block_no;
+		} get_status;
+		struct {
+			u32 block_no;
+		} get_pos;
+	} u;
+};
+
+enum viotapesubtype {
+	viotapeopen = 0x0001,
+	viotapeclose = 0x0002,
+	viotaperead = 0x0003,
+	viotapewrite = 0x0004,
+	viotapegetinfo = 0x0005,
+	viotapeop = 0x0006,
+	viotapegetpos = 0x0007,
+	viotapesetpos = 0x0008,
+	viotapegetstatus = 0x0009
+};
+
+/*
+ * Each subtype can register a handler to process their events.
+ * The handler must have this interface.
+ */
+typedef void (vio_event_handler_t) (struct HvLpEvent * event);
+
+extern int viopath_open(HvLpIndex remoteLp, int subtype, int numReq);
+extern int viopath_close(HvLpIndex remoteLp, int subtype, int numReq);
+extern int vio_setHandler(int subtype, vio_event_handler_t * beh);
+extern int vio_clearHandler(int subtype);
+extern int viopath_isactive(HvLpIndex lp);
+extern HvLpInstanceId viopath_sourceinst(HvLpIndex lp);
+extern HvLpInstanceId viopath_targetinst(HvLpIndex lp);
+extern void vio_set_hostlp(void);
+extern void *vio_get_event_buffer(int subtype);
+extern void vio_free_event_buffer(int subtype, void *buffer);
+
+extern struct vio_dev *vio_create_viodasd(u32 unit);
+
+extern HvLpIndex viopath_hostLp;
+extern HvLpIndex viopath_ourLp;
+
+#define VIOCHAR_MAX_DATA	200
+
+#define VIOMAJOR_SUBTYPE_MASK	0xff00
+#define VIOMINOR_SUBTYPE_MASK	0x00ff
+#define VIOMAJOR_SUBTYPE_SHIFT	8
+
+#define VIOVERSION		0x0101
+
+/*
+ * This is the general structure for VIO errors; each module should have
+ * a table of them, and each table should be terminated by an entry of
+ * { 0, 0, NULL }.  Then, to find a specific error message, a module
+ * should pass its local table and the return code.
+ */
+struct vio_error_entry {
+	u16 rc;
+	int errno;
+	const char *msg;
+};
+extern const struct vio_error_entry *vio_lookup_rc(
+		const struct vio_error_entry *local_table, u16 rc);
+
+enum viosubtypes {
+	viomajorsubtype_monitor = 0x0100,
+	viomajorsubtype_blockio = 0x0200,
+	viomajorsubtype_chario = 0x0300,
+	viomajorsubtype_config = 0x0400,
+	viomajorsubtype_cdio = 0x0500,
+	viomajorsubtype_tape = 0x0600,
+	viomajorsubtype_scsi = 0x0700
+};
+
+enum vioconfigsubtype {
+	vioconfigget = 0x0001,
+};
+
+enum viorc {
+	viorc_good = 0x0000,
+	viorc_noConnection = 0x0001,
+	viorc_noReceiver = 0x0002,
+	viorc_noBufferAvailable = 0x0003,
+	viorc_invalidMessageType = 0x0004,
+	viorc_invalidRange = 0x0201,
+	viorc_invalidToken = 0x0202,
+	viorc_DMAError = 0x0203,
+	viorc_useError = 0x0204,
+	viorc_releaseError = 0x0205,
+	viorc_invalidDisk = 0x0206,
+	viorc_openRejected = 0x0301
+};
+
+/*
+ * The structure of the events that flow between us and OS/400 for chario
+ * events.  You can't mess with this unless the OS/400 side changes too.
+ */
+struct viocharlpevent {
+	struct HvLpEvent event;
+	u32 reserved;
+	u16 version;
+	u16 subtype_result_code;
+	u8 virtual_device;
+	u8 len;
+	u8 data[VIOCHAR_MAX_DATA];
+};
+
+#define VIOCHAR_WINDOW		10
+
+enum viocharsubtype {
+	viocharopen = 0x0001,
+	viocharclose = 0x0002,
+	viochardata = 0x0003,
+	viocharack = 0x0004,
+	viocharconfig = 0x0005
+};
+
+enum viochar_rc {
+	viochar_rc_ebusy = 1
+};
+
+#endif /* _ASM_POWERPC_ISERIES_VIO_H */
diff --git a/arch/powerpc/include/asm/kdebug.h b/arch/powerpc/include/asm/kdebug.h
new file mode 100644
index 000000000000..ae6d206728af
--- /dev/null
+++ b/arch/powerpc/include/asm/kdebug.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_POWERPC_KDEBUG_H
+#define _ASM_POWERPC_KDEBUG_H
+#ifdef __KERNEL__
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_IABR_MATCH,
+	DIE_DABR_MATCH,
+	DIE_BPT,
+	DIE_SSTEP,
+};
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_KDEBUG_H */
diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h
new file mode 100644
index 000000000000..f6c93c716898
--- /dev/null
+++ b/arch/powerpc/include/asm/kdump.h
@@ -0,0 +1,35 @@
+#ifndef _PPC64_KDUMP_H
+#define _PPC64_KDUMP_H
+
+/* Kdump kernel runs at 32 MB, change at your peril. */
+#define KDUMP_KERNELBASE	0x2000000
+
+/* How many bytes to reserve at zero for kdump. The reserve limit should
+ * be greater or equal to the trampoline's end address.
+ * Reserve to the end of the FWNMI area, see head_64.S */
+#define KDUMP_RESERVE_LIMIT	0x10000 /* 64K */
+
+#ifdef CONFIG_CRASH_DUMP
+
+#define KDUMP_TRAMPOLINE_START	0x0100
+#define KDUMP_TRAMPOLINE_END	0x3000
+
+#define KDUMP_MIN_TCE_ENTRIES	2048
+
+#endif /* CONFIG_CRASH_DUMP */
+
+#ifndef __ASSEMBLY__
+#ifdef CONFIG_CRASH_DUMP
+
+extern void reserve_kdump_trampoline(void);
+extern void setup_kdump_trampoline(void);
+
+#else /* !CONFIG_CRASH_DUMP */
+
+static inline void reserve_kdump_trampoline(void) { ; }
+static inline void setup_kdump_trampoline(void) { ; }
+
+#endif /* CONFIG_CRASH_DUMP */
+#endif /* __ASSEMBLY__ */
+
+#endif /* __PPC64_KDUMP_H */
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
new file mode 100644
index 000000000000..acdcdc66f1b6
--- /dev/null
+++ b/arch/powerpc/include/asm/kexec.h
@@ -0,0 +1,160 @@
+#ifndef _ASM_POWERPC_KEXEC_H
+#define _ASM_POWERPC_KEXEC_H
+#ifdef __KERNEL__
+
+/*
+ * Maximum page that is mapped directly into kernel memory.
+ * XXX: Since we copy virt we can use any page we allocate
+ */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+
+/*
+ * Maximum address we can reach in physical address mode.
+ * XXX: I want to allow initrd in highmem. Otherwise set to rmo on LPAR.
+ */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+
+/* Maximum address we can use for the control code buffer */
+#ifdef __powerpc64__
+#define KEXEC_CONTROL_MEMORY_LIMIT (-1UL)
+#else
+/* TASK_SIZE, probably left over from use_mm ?? */
+#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+#endif
+
+#define KEXEC_CONTROL_CODE_SIZE 4096
+
+/* The native architecture */
+#ifdef __powerpc64__
+#define KEXEC_ARCH KEXEC_ARCH_PPC64
+#else
+#define KEXEC_ARCH KEXEC_ARCH_PPC
+#endif
+
+#ifndef __ASSEMBLY__
+#include <linux/cpumask.h>
+
+typedef void (*crash_shutdown_t)(void);
+
+#ifdef CONFIG_KEXEC
+
+#ifdef __powerpc64__
+/*
+ * This function is responsible for capturing register states if coming
+ * via panic or invoking dump using sysrq-trigger.
+ */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+					struct pt_regs *oldregs)
+{
+	if (oldregs)
+		memcpy(newregs, oldregs, sizeof(*newregs));
+	else {
+		/* FIXME Merge this with xmon_save_regs ?? */
+		unsigned long tmp1, tmp2;
+		__asm__ __volatile__ (
+			"std    0,0(%2)\n"
+			"std    1,8(%2)\n"
+			"std    2,16(%2)\n"
+			"std    3,24(%2)\n"
+			"std    4,32(%2)\n"
+			"std    5,40(%2)\n"
+			"std    6,48(%2)\n"
+			"std    7,56(%2)\n"
+			"std    8,64(%2)\n"
+			"std    9,72(%2)\n"
+			"std    10,80(%2)\n"
+			"std    11,88(%2)\n"
+			"std    12,96(%2)\n"
+			"std    13,104(%2)\n"
+			"std    14,112(%2)\n"
+			"std    15,120(%2)\n"
+			"std    16,128(%2)\n"
+			"std    17,136(%2)\n"
+			"std    18,144(%2)\n"
+			"std    19,152(%2)\n"
+			"std    20,160(%2)\n"
+			"std    21,168(%2)\n"
+			"std    22,176(%2)\n"
+			"std    23,184(%2)\n"
+			"std    24,192(%2)\n"
+			"std    25,200(%2)\n"
+			"std    26,208(%2)\n"
+			"std    27,216(%2)\n"
+			"std    28,224(%2)\n"
+			"std    29,232(%2)\n"
+			"std    30,240(%2)\n"
+			"std    31,248(%2)\n"
+			"mfmsr  %0\n"
+			"std    %0, 264(%2)\n"
+			"mfctr  %0\n"
+			"std    %0, 280(%2)\n"
+			"mflr   %0\n"
+			"std    %0, 288(%2)\n"
+			"bl     1f\n"
+		"1:     mflr   %1\n"
+			"std    %1, 256(%2)\n"
+			"mtlr   %0\n"
+			"mfxer  %0\n"
+			"std    %0, 296(%2)\n"
+			: "=&r" (tmp1), "=&r" (tmp2)
+			: "b" (newregs)
+			: "memory");
+	}
+}
+#else
+/*
+ * Provide a dummy definition to avoid build failures. Will remain
+ * empty till crash dump support is enabled.
+ */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+					struct pt_regs *oldregs) { }
+#endif /* !__powerpc64 __ */
+
+extern void kexec_smp_wait(void);	/* get and clear naca physid, wait for
+					  master to copy new code to 0 */
+extern int crashing_cpu;
+extern void crash_send_ipi(void (*crash_ipi_callback)(struct pt_regs *));
+extern cpumask_t cpus_in_sr;
+static inline int kexec_sr_activated(int cpu)
+{
+	return cpu_isset(cpu,cpus_in_sr);
+}
+
+struct kimage;
+struct pt_regs;
+extern void default_machine_kexec(struct kimage *image);
+extern int default_machine_kexec_prepare(struct kimage *image);
+extern void default_machine_crash_shutdown(struct pt_regs *regs);
+extern int crash_shutdown_register(crash_shutdown_t handler);
+extern int crash_shutdown_unregister(crash_shutdown_t handler);
+
+extern void machine_kexec_simple(struct kimage *image);
+extern void crash_kexec_secondary(struct pt_regs *regs);
+extern int overlaps_crashkernel(unsigned long start, unsigned long size);
+extern void reserve_crashkernel(void);
+
+#else /* !CONFIG_KEXEC */
+static inline int kexec_sr_activated(int cpu) { return 0; }
+static inline void crash_kexec_secondary(struct pt_regs *regs) { }
+
+static inline int overlaps_crashkernel(unsigned long start, unsigned long size)
+{
+	return 0;
+}
+
+static inline void reserve_crashkernel(void) { ; }
+
+static inline int crash_shutdown_register(crash_shutdown_t handler)
+{
+	return 0;
+}
+
+static inline int crash_shutdown_unregister(crash_shutdown_t handler)
+{
+	return 0;
+}
+
+#endif /* CONFIG_KEXEC */
+#endif /* ! __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_KEXEC_H */
diff --git a/arch/powerpc/include/asm/keylargo.h b/arch/powerpc/include/asm/keylargo.h
new file mode 100644
index 000000000000..d8520ef121f9
--- /dev/null
+++ b/arch/powerpc/include/asm/keylargo.h
@@ -0,0 +1,261 @@
+#ifndef _ASM_POWERPC_KEYLARGO_H
+#define _ASM_POWERPC_KEYLARGO_H
+#ifdef __KERNEL__
+/*
+ * keylargo.h: definitions for using the "KeyLargo" I/O controller chip.
+ *
+ */
+
+/* "Pangea" chipset has keylargo device-id 0x25 while core99
+ * has device-id 0x22. The rev. of the pangea one is 0, so we
+ * fake an artificial rev. in keylargo_rev by oring 0x100
+ */
+#define KL_PANGEA_REV		0x100
+
+/* offset from base for feature control registers */
+#define KEYLARGO_MBCR		0x34	/* KL Only, Media bay control/status */
+#define KEYLARGO_FCR0		0x38
+#define KEYLARGO_FCR1		0x3c
+#define KEYLARGO_FCR2		0x40
+#define KEYLARGO_FCR3		0x44
+#define KEYLARGO_FCR4		0x48
+#define KEYLARGO_FCR5		0x4c	/* Pangea only */
+
+/* K2 aditional FCRs */
+#define K2_FCR6			0x34
+#define K2_FCR7			0x30
+#define K2_FCR8			0x2c
+#define K2_FCR9			0x28
+#define K2_FCR10		0x24
+
+/* GPIO registers */
+#define KEYLARGO_GPIO_LEVELS0		0x50
+#define KEYLARGO_GPIO_LEVELS1		0x54
+#define KEYLARGO_GPIO_EXTINT_0		0x58
+#define KEYLARGO_GPIO_EXTINT_CNT	18
+#define KEYLARGO_GPIO_0			0x6A
+#define KEYLARGO_GPIO_CNT		17
+#define KEYLARGO_GPIO_EXTINT_DUAL_EDGE	0x80
+#define KEYLARGO_GPIO_OUTPUT_ENABLE	0x04
+#define KEYLARGO_GPIO_OUTOUT_DATA	0x01
+#define KEYLARGO_GPIO_INPUT_DATA	0x02
+
+/* K2 does only extint GPIOs and does 51 of them */
+#define K2_GPIO_EXTINT_0		0x58
+#define K2_GPIO_EXTINT_CNT		51
+
+/* Specific GPIO regs */
+
+#define KL_GPIO_MODEM_RESET		(KEYLARGO_GPIO_0+0x03)
+#define KL_GPIO_MODEM_POWER		(KEYLARGO_GPIO_0+0x02) /* Pangea */
+
+#define KL_GPIO_SOUND_POWER		(KEYLARGO_GPIO_0+0x05)
+
+/* Hrm... this one is only to be used on Pismo. It seeem to also
+ * control the timebase enable on other machines. Still to be
+ * experimented... --BenH.
+ */
+#define KL_GPIO_FW_CABLE_POWER		(KEYLARGO_GPIO_0+0x09)
+#define KL_GPIO_TB_ENABLE		(KEYLARGO_GPIO_0+0x09)
+
+#define KL_GPIO_ETH_PHY_RESET		(KEYLARGO_GPIO_0+0x10)
+
+#define KL_GPIO_EXTINT_CPU1		(KEYLARGO_GPIO_0+0x0a)
+#define KL_GPIO_EXTINT_CPU1_ASSERT	0x04
+#define KL_GPIO_EXTINT_CPU1_RELEASE	0x38
+
+#define KL_GPIO_RESET_CPU0		(KEYLARGO_GPIO_EXTINT_0+0x03)
+#define KL_GPIO_RESET_CPU1		(KEYLARGO_GPIO_EXTINT_0+0x04)
+#define KL_GPIO_RESET_CPU2		(KEYLARGO_GPIO_EXTINT_0+0x0f)
+#define KL_GPIO_RESET_CPU3		(KEYLARGO_GPIO_EXTINT_0+0x10)
+
+#define KL_GPIO_PMU_MESSAGE_IRQ		(KEYLARGO_GPIO_EXTINT_0+0x09)
+#define KL_GPIO_PMU_MESSAGE_BIT		KEYLARGO_GPIO_INPUT_DATA
+
+#define KL_GPIO_MEDIABAY_IRQ		(KEYLARGO_GPIO_EXTINT_0+0x0e)
+
+#define KL_GPIO_AIRPORT_0		(KEYLARGO_GPIO_EXTINT_0+0x0a)
+#define KL_GPIO_AIRPORT_1		(KEYLARGO_GPIO_EXTINT_0+0x0d)
+#define KL_GPIO_AIRPORT_2		(KEYLARGO_GPIO_0+0x0d)
+#define KL_GPIO_AIRPORT_3		(KEYLARGO_GPIO_0+0x0e)
+#define KL_GPIO_AIRPORT_4		(KEYLARGO_GPIO_0+0x0f)
+
+/*
+ * Bits in feature control register. Those bits different for K2 are
+ * listed separately
+ */
+#define KL_MBCR_MB0_PCI_ENABLE		0x00000800	/* exist ? */
+#define KL_MBCR_MB0_IDE_ENABLE		0x00001000
+#define KL_MBCR_MB0_FLOPPY_ENABLE	0x00002000	/* exist ? */
+#define KL_MBCR_MB0_SOUND_ENABLE	0x00004000	/* hrm... */
+#define KL_MBCR_MB0_DEV_MASK		0x00007800
+#define KL_MBCR_MB0_DEV_POWER		0x00000400
+#define KL_MBCR_MB0_DEV_RESET		0x00000200
+#define KL_MBCR_MB0_ENABLE		0x00000100
+#define KL_MBCR_MB1_PCI_ENABLE		0x08000000	/* exist ? */
+#define KL_MBCR_MB1_IDE_ENABLE		0x10000000
+#define KL_MBCR_MB1_FLOPPY_ENABLE	0x20000000	/* exist ? */
+#define KL_MBCR_MB1_SOUND_ENABLE	0x40000000	/* hrm... */
+#define KL_MBCR_MB1_DEV_MASK		0x78000000
+#define KL_MBCR_MB1_DEV_POWER		0x04000000
+#define KL_MBCR_MB1_DEV_RESET		0x02000000
+#define KL_MBCR_MB1_ENABLE		0x01000000
+
+#define KL0_SCC_B_INTF_ENABLE		0x00000001	/* (KL Only) */
+#define KL0_SCC_A_INTF_ENABLE		0x00000002
+#define KL0_SCC_SLOWPCLK		0x00000004
+#define KL0_SCC_RESET			0x00000008
+#define KL0_SCCA_ENABLE			0x00000010
+#define KL0_SCCB_ENABLE			0x00000020
+#define KL0_SCC_CELL_ENABLE		0x00000040
+#define KL0_IRDA_HIGH_BAND		0x00000100	/* (KL Only) */
+#define KL0_IRDA_SOURCE2_SEL		0x00000200	/* (KL Only) */
+#define KL0_IRDA_SOURCE1_SEL		0x00000400	/* (KL Only) */
+#define KL0_PG_USB0_PMI_ENABLE		0x00000400	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_RESET			0x00000800	/* (KL Only) */
+#define KL0_PG_USB0_REF_SUSPEND_SEL	0x00000800	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_DEFAULT1		0x00001000	/* (KL Only) */
+#define KL0_PG_USB0_REF_SUSPEND		0x00001000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_DEFAULT0		0x00002000	/* (KL Only) */
+#define KL0_PG_USB0_PAD_SUSPEND		0x00002000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_FAST_CONNECT		0x00004000	/* (KL Only) */
+#define KL0_PG_USB1_PMI_ENABLE		0x00004000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_ENABLE			0x00008000	/* (KL Only) */
+#define KL0_PG_USB1_REF_SUSPEND_SEL	0x00008000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_CLK32_ENABLE		0x00010000	/* (KL Only) */
+#define KL0_PG_USB1_REF_SUSPEND		0x00010000	/* (Pangea/Intrepid Only) */
+#define KL0_IRDA_CLK19_ENABLE		0x00020000	/* (KL Only) */
+#define KL0_PG_USB1_PAD_SUSPEND		0x00020000	/* (Pangea/Intrepid Only) */
+#define KL0_USB0_PAD_SUSPEND0		0x00040000
+#define KL0_USB0_PAD_SUSPEND1		0x00080000
+#define KL0_USB0_CELL_ENABLE		0x00100000
+#define KL0_USB1_PAD_SUSPEND0		0x00400000
+#define KL0_USB1_PAD_SUSPEND1		0x00800000
+#define KL0_USB1_CELL_ENABLE		0x01000000
+#define KL0_USB_REF_SUSPEND		0x10000000	/* (KL Only) */
+
+#define KL0_SERIAL_ENABLE		(KL0_SCC_B_INTF_ENABLE | \
+					KL0_SCC_SLOWPCLK | \
+					KL0_SCC_CELL_ENABLE | KL0_SCCA_ENABLE)
+
+#define KL1_USB2_PMI_ENABLE		0x00000001	/* Intrepid only */
+#define KL1_AUDIO_SEL_22MCLK		0x00000002	/* KL/Pangea only */
+#define KL1_USB2_REF_SUSPEND_SEL	0x00000002	/* Intrepid only */
+#define KL1_USB2_REF_SUSPEND		0x00000004	/* Intrepid only */
+#define KL1_AUDIO_CLK_ENABLE_BIT	0x00000008	/* KL/Pangea only */
+#define KL1_USB2_PAD_SUSPEND_SEL	0x00000008	/* Intrepid only */
+#define KL1_USB2_PAD_SUSPEND0		0x00000010	/* Intrepid only */
+#define KL1_AUDIO_CLK_OUT_ENABLE	0x00000020	/* KL/Pangea only */
+#define KL1_USB2_PAD_SUSPEND1		0x00000020	/* Intrepid only */
+#define KL1_AUDIO_CELL_ENABLE		0x00000040	/* KL/Pangea only */
+#define KL1_USB2_CELL_ENABLE		0x00000040	/* Intrepid only */
+#define KL1_AUDIO_CHOOSE		0x00000080	/* KL/Pangea only */
+#define KL1_I2S0_CHOOSE			0x00000200	/* KL Only */
+#define KL1_I2S0_CELL_ENABLE		0x00000400
+#define KL1_I2S0_CLK_ENABLE_BIT		0x00001000
+#define KL1_I2S0_ENABLE			0x00002000
+#define KL1_I2S1_CELL_ENABLE		0x00020000
+#define KL1_I2S1_CLK_ENABLE_BIT		0x00080000
+#define KL1_I2S1_ENABLE			0x00100000
+#define KL1_EIDE0_ENABLE		0x00800000	/* KL/Intrepid Only */
+#define KL1_EIDE0_RESET_N		0x01000000	/* KL/Intrepid Only */
+#define KL1_EIDE1_ENABLE		0x04000000	/* KL Only */
+#define KL1_EIDE1_RESET_N		0x08000000	/* KL Only */
+#define KL1_UIDE_ENABLE			0x20000000	/* KL/Pangea Only */
+#define KL1_UIDE_RESET_N		0x40000000	/* KL/Pangea Only */
+
+#define KL2_IOBUS_ENABLE		0x00000002
+#define KL2_SLEEP_STATE_BIT		0x00000100	/* KL Only */
+#define KL2_PG_STOP_ALL_CLOCKS		0x00000100	/* Pangea Only */
+#define KL2_MPIC_ENABLE			0x00020000
+#define KL2_CARDSLOT_RESET		0x00040000	/* Pangea/Intrepid Only */
+#define KL2_ALT_DATA_OUT		0x02000000	/* KL Only ??? */
+#define KL2_MEM_IS_BIG			0x04000000
+#define KL2_CARDSEL_16			0x08000000
+
+#define KL3_SHUTDOWN_PLL_TOTAL		0x00000001	/* KL/Pangea only */
+#define KL3_SHUTDOWN_PLLKW6		0x00000002	/* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL3		0x00000002	/* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW4		0x00000004	/* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL2		0x00000004	/* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW35		0x00000008	/* KL/Pangea only */
+#define KL3_IT_SHUTDOWN_PLL1		0x00000008	/* Intrepid only */
+#define KL3_SHUTDOWN_PLLKW12		0x00000010	/* KL Only */
+#define KL3_IT_ENABLE_PLL3_SHUTDOWN	0x00000010	/* Intrepid only */
+#define KL3_PLL_RESET			0x00000020	/* KL/Pangea only */
+#define KL3_IT_ENABLE_PLL2_SHUTDOWN	0x00000020	/* Intrepid only */
+#define KL3_IT_ENABLE_PLL1_SHUTDOWN	0x00000010	/* Intrepid only */
+#define KL3_SHUTDOWN_PLL2X		0x00000080	/* KL Only */
+#define KL3_CLK66_ENABLE		0x00000100	/* KL Only */
+#define KL3_CLK49_ENABLE		0x00000200
+#define KL3_CLK45_ENABLE		0x00000400
+#define KL3_CLK31_ENABLE		0x00000800	/* KL/Pangea only */
+#define KL3_TIMER_CLK18_ENABLE		0x00001000
+#define KL3_I2S1_CLK18_ENABLE		0x00002000
+#define KL3_I2S0_CLK18_ENABLE		0x00004000
+#define KL3_VIA_CLK16_ENABLE		0x00008000	/* KL/Pangea only */
+#define KL3_IT_VIA_CLK32_ENABLE		0x00008000	/* Intrepid only */
+#define KL3_STOPPING33_ENABLED		0x00080000	/* KL Only */
+#define KL3_PG_PLL_ENABLE_TEST		0x00080000	/* Pangea Only */
+
+/* Intrepid USB bus 2, port 0,1 */
+#define KL3_IT_PORT_WAKEUP_ENABLE(p)		(0x00080000 << ((p)<<3))
+#define KL3_IT_PORT_RESUME_WAKE_EN(p)		(0x00040000 << ((p)<<3))
+#define KL3_IT_PORT_CONNECT_WAKE_EN(p)		(0x00020000 << ((p)<<3))
+#define KL3_IT_PORT_DISCONNECT_WAKE_EN(p)	(0x00010000 << ((p)<<3))
+#define KL3_IT_PORT_RESUME_STAT(p)		(0x00300000 << ((p)<<3))
+#define KL3_IT_PORT_CONNECT_STAT(p)		(0x00200000 << ((p)<<3))
+#define KL3_IT_PORT_DISCONNECT_STAT(p)		(0x00100000 << ((p)<<3))
+
+/* Port 0,1 : bus 0, port 2,3 : bus 1 */
+#define KL4_PORT_WAKEUP_ENABLE(p)	(0x00000008 << ((p)<<3))
+#define KL4_PORT_RESUME_WAKE_EN(p)	(0x00000004 << ((p)<<3))
+#define KL4_PORT_CONNECT_WAKE_EN(p)	(0x00000002 << ((p)<<3))
+#define KL4_PORT_DISCONNECT_WAKE_EN(p)	(0x00000001 << ((p)<<3))
+#define KL4_PORT_RESUME_STAT(p)		(0x00000040 << ((p)<<3))
+#define KL4_PORT_CONNECT_STAT(p)	(0x00000020 << ((p)<<3))
+#define KL4_PORT_DISCONNECT_STAT(p)	(0x00000010 << ((p)<<3))
+
+/* Pangea and Intrepid only */
+#define KL5_VIA_USE_CLK31		0000000001	/* Pangea Only */
+#define KL5_SCC_USE_CLK31		0x00000002	/* Pangea Only */
+#define KL5_PWM_CLK32_EN		0x00000004
+#define KL5_CLK3_68_EN			0x00000010
+#define KL5_CLK32_EN			0x00000020
+
+
+/* K2 definitions */
+#define K2_FCR0_USB0_SWRESET		0x00200000
+#define K2_FCR0_USB1_SWRESET		0x02000000
+#define K2_FCR0_RING_PME_DISABLE	0x08000000
+
+#define K2_FCR1_PCI1_BUS_RESET_N	0x00000010
+#define K2_FCR1_PCI1_SLEEP_RESET_EN	0x00000020
+#define K2_FCR1_I2S0_CELL_ENABLE	0x00000400
+#define K2_FCR1_I2S0_RESET		0x00000800
+#define K2_FCR1_I2S0_CLK_ENABLE_BIT	0x00001000
+#define K2_FCR1_I2S0_ENABLE    		0x00002000
+#define K2_FCR1_PCI1_CLK_ENABLE		0x00004000
+#define K2_FCR1_FW_CLK_ENABLE		0x00008000
+#define K2_FCR1_FW_RESET_N		0x00010000
+#define K2_FCR1_I2S1_CELL_ENABLE	0x00020000
+#define K2_FCR1_I2S1_CLK_ENABLE_BIT	0x00080000
+#define K2_FCR1_I2S1_ENABLE		0x00100000
+#define K2_FCR1_GMAC_CLK_ENABLE		0x00400000
+#define K2_FCR1_GMAC_POWER_DOWN		0x00800000
+#define K2_FCR1_GMAC_RESET_N		0x01000000
+#define K2_FCR1_SATA_CLK_ENABLE		0x02000000
+#define K2_FCR1_SATA_POWER_DOWN		0x04000000
+#define K2_FCR1_SATA_RESET_N		0x08000000
+#define K2_FCR1_UATA_CLK_ENABLE		0x10000000
+#define K2_FCR1_UATA_RESET_N		0x40000000
+#define K2_FCR1_UATA_CHOOSE_CLK66	0x80000000
+
+/* Shasta definitions */
+#define SH_FCR1_I2S2_CELL_ENABLE	0x00000010
+#define SH_FCR1_I2S2_CLK_ENABLE_BIT	0x00000040
+#define SH_FCR1_I2S2_ENABLE		0x00000080
+#define SH_FCR3_I2S2_CLK18_ENABLE	0x00008000
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_KEYLARGO_H */
diff --git a/arch/powerpc/include/asm/kgdb.h b/arch/powerpc/include/asm/kgdb.h
new file mode 100644
index 000000000000..edd217006d27
--- /dev/null
+++ b/arch/powerpc/include/asm/kgdb.h
@@ -0,0 +1,63 @@
+/*
+ * The PowerPC (32/64) specific defines / externs for KGDB.  Based on
+ * the previous 32bit and 64bit specific files, which had the following
+ * copyrights:
+ *
+ * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com)
+ * PPC Mods (C) 2004 Tom Rini (trini@mvista.com)
+ * PPC Mods (C) 2003 John Whitney (john.whitney@timesys.com)
+ * PPC Mods (C) 1998 Michael Tesch (tesch@cs.wisc.edu)
+ *
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Author: Tom Rini <trini@kernel.crashing.org>
+ *
+ * 2006 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifdef __KERNEL__
+#ifndef __POWERPC_KGDB_H__
+#define __POWERPC_KGDB_H__
+
+#ifndef __ASSEMBLY__
+
+#define BREAK_INSTR_SIZE	4
+#define BUFMAX			((NUMREGBYTES * 2) + 512)
+#define OUTBUFMAX		((NUMREGBYTES * 2) + 512)
+static inline void arch_kgdb_breakpoint(void)
+{
+	asm(".long 0x7d821008"); /* twge r2, r2 */
+}
+#define CACHE_FLUSH_IS_SAFE	1
+
+/* The number bytes of registers we have to save depends on a few
+ * things.  For 64bit we default to not including vector registers and
+ * vector state registers. */
+#ifdef CONFIG_PPC64
+/*
+ * 64 bit (8 byte) registers:
+ *   32 gpr, 32 fpr, nip, msr, link, ctr
+ * 32 bit (4 byte) registers:
+ *   ccr, xer, fpscr
+ */
+#define NUMREGBYTES		((68 * 8) + (3 * 4))
+#define NUMCRITREGBYTES		184
+#else /* CONFIG_PPC32 */
+/* On non-E500 family PPC32 we determine the size by picking the last
+ * register we need, but on E500 we skip sections so we list what we
+ * need to store, and add it up. */
+#ifndef CONFIG_E500
+#define MAXREG			(PT_FPSCR+1)
+#else
+/* 32 GPRs (8 bytes), nip, msr, ccr, link, ctr, xer, acc (8 bytes), spefscr*/
+#define MAXREG                 ((32*2)+6+2+1)
+#endif
+#define NUMREGBYTES		(MAXREG * sizeof(int))
+/* CR/LR, R1, R2, R13-R31 inclusive. */
+#define NUMCRITREGBYTES		(23 * sizeof(int))
+#endif /* 32/64 */
+#endif /* !(__ASSEMBLY__) */
+#endif /* !__POWERPC_KGDB_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/kmap_types.h b/arch/powerpc/include/asm/kmap_types.h
new file mode 100644
index 000000000000..b6bac6f61c16
--- /dev/null
+++ b/arch/powerpc/include/asm/kmap_types.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_POWERPC_KMAP_TYPES_H
+#define _ASM_POWERPC_KMAP_TYPES_H
+
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_PPC_SYNC_PAGE,
+	KM_PPC_SYNC_ICACHE,
+	KM_TYPE_NR
+};
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_KMAP_TYPES_H */
diff --git a/arch/powerpc/include/asm/kprobes.h b/arch/powerpc/include/asm/kprobes.h
new file mode 100644
index 000000000000..d0e7701fa1f6
--- /dev/null
+++ b/arch/powerpc/include/asm/kprobes.h
@@ -0,0 +1,118 @@
+#ifndef _ASM_POWERPC_KPROBES_H
+#define _ASM_POWERPC_KPROBES_H
+#ifdef __KERNEL__
+/*
+ *  Kernel Probes (KProbes)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2004
+ *
+ * 2002-Oct	Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
+ *		Probes initial implementation ( includes suggestions from
+ *		Rusty Russell).
+ * 2004-Nov	Modified for PPC64 by Ananth N Mavinakayanahalli
+ *		<ananth@in.ibm.com>
+ */
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#define  __ARCH_WANT_KPROBES_INSN_SLOT
+
+struct pt_regs;
+struct kprobe;
+
+typedef unsigned int kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION	0x7fe00008	/* trap */
+#define MAX_INSN_SIZE 1
+
+#define IS_TW(instr)		(((instr) & 0xfc0007fe) == 0x7c000008)
+#define IS_TD(instr)		(((instr) & 0xfc0007fe) == 0x7c000088)
+#define IS_TDI(instr)		(((instr) & 0xfc000000) == 0x08000000)
+#define IS_TWI(instr)		(((instr) & 0xfc000000) == 0x0c000000)
+
+#ifdef CONFIG_PPC64
+/*
+ * 64bit powerpc uses function descriptors.
+ * Handle cases where:
+ * 		- User passes a <.symbol> or <module:.symbol>
+ * 		- User passes a <symbol> or <module:symbol>
+ * 		- User passes a non-existant symbol, kallsyms_lookup_name
+ * 		  returns 0. Don't deref the NULL pointer in that case
+ */
+#define kprobe_lookup_name(name, addr)					\
+{									\
+	addr = (kprobe_opcode_t *)kallsyms_lookup_name(name);		\
+	if (addr) {							\
+		char *colon;						\
+		if ((colon = strchr(name, ':')) != NULL) {		\
+			colon++;					\
+			if (*colon != '\0' && *colon != '.')		\
+				addr = *(kprobe_opcode_t **)addr;	\
+		} else if (name[0] != '.')				\
+			addr = *(kprobe_opcode_t **)addr;		\
+	} else {							\
+		char dot_name[KSYM_NAME_LEN];				\
+		dot_name[0] = '.';					\
+		dot_name[1] = '\0';					\
+		strncat(dot_name, name, KSYM_NAME_LEN - 2);		\
+		addr = (kprobe_opcode_t *)kallsyms_lookup_name(dot_name); \
+	}								\
+}
+
+#define is_trap(instr)	(IS_TW(instr) || IS_TD(instr) || \
+			IS_TWI(instr) || IS_TDI(instr))
+#else
+/* Use stock kprobe_lookup_name since ppc32 doesn't use function descriptors */
+#define is_trap(instr)	(IS_TW(instr) || IS_TWI(instr))
+#endif
+
+#define flush_insn_slot(p)	do { } while (0)
+#define kretprobe_blacklist_size 0
+
+void kretprobe_trampoline(void);
+extern void arch_remove_kprobe(struct kprobe *p);
+
+/* Architecture specific copy of original instruction */
+struct arch_specific_insn {
+	/* copy of original instruction */
+	kprobe_opcode_t *insn;
+	/*
+	 * Set in kprobes code, initially to 0. If the instruction can be
+	 * eumulated, this is set to 1, if not, to -1.
+	 */
+	int boostable;
+};
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+	unsigned long saved_msr;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	unsigned long kprobe_saved_msr;
+	struct pt_regs jprobe_saved_regs;
+	struct prev_kprobe prev_kprobe;
+};
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+					unsigned long val, void *data);
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_KPROBES_H */
diff --git a/arch/powerpc/include/asm/kvm.h b/arch/powerpc/include/asm/kvm.h
new file mode 100644
index 000000000000..f993e4198d5c
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm.h
@@ -0,0 +1,55 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __LINUX_KVM_POWERPC_H
+#define __LINUX_KVM_POWERPC_H
+
+#include <asm/types.h>
+
+struct kvm_regs {
+	__u64 pc;
+	__u64 cr;
+	__u64 ctr;
+	__u64 lr;
+	__u64 xer;
+	__u64 msr;
+	__u64 srr0;
+	__u64 srr1;
+	__u64 pid;
+
+	__u64 sprg0;
+	__u64 sprg1;
+	__u64 sprg2;
+	__u64 sprg3;
+	__u64 sprg4;
+	__u64 sprg5;
+	__u64 sprg6;
+	__u64 sprg7;
+
+	__u64 gpr[32];
+};
+
+struct kvm_sregs {
+};
+
+struct kvm_fpu {
+	__u64 fpr[32];
+};
+
+#endif /* __LINUX_KVM_POWERPC_H */
diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h
new file mode 100644
index 000000000000..2197764796d9
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_asm.h
@@ -0,0 +1,55 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __POWERPC_KVM_ASM_H__
+#define __POWERPC_KVM_ASM_H__
+
+/* IVPR must be 64KiB-aligned. */
+#define VCPU_SIZE_ORDER 4
+#define VCPU_SIZE_LOG   (VCPU_SIZE_ORDER + 12)
+#define VCPU_TLB_PGSZ   PPC44x_TLB_64K
+#define VCPU_SIZE_BYTES (1<<VCPU_SIZE_LOG)
+
+#define BOOKE_INTERRUPT_CRITICAL 0
+#define BOOKE_INTERRUPT_MACHINE_CHECK 1
+#define BOOKE_INTERRUPT_DATA_STORAGE 2
+#define BOOKE_INTERRUPT_INST_STORAGE 3
+#define BOOKE_INTERRUPT_EXTERNAL 4
+#define BOOKE_INTERRUPT_ALIGNMENT 5
+#define BOOKE_INTERRUPT_PROGRAM 6
+#define BOOKE_INTERRUPT_FP_UNAVAIL 7
+#define BOOKE_INTERRUPT_SYSCALL 8
+#define BOOKE_INTERRUPT_AP_UNAVAIL 9
+#define BOOKE_INTERRUPT_DECREMENTER 10
+#define BOOKE_INTERRUPT_FIT 11
+#define BOOKE_INTERRUPT_WATCHDOG 12
+#define BOOKE_INTERRUPT_DTLB_MISS 13
+#define BOOKE_INTERRUPT_ITLB_MISS 14
+#define BOOKE_INTERRUPT_DEBUG 15
+#define BOOKE_MAX_INTERRUPT 15
+
+#define RESUME_FLAG_NV          (1<<0)  /* Reload guest nonvolatile state? */
+#define RESUME_FLAG_HOST        (1<<1)  /* Resume host? */
+
+#define RESUME_GUEST            0
+#define RESUME_GUEST_NV         RESUME_FLAG_NV
+#define RESUME_HOST             RESUME_FLAG_HOST
+#define RESUME_HOST_NV          (RESUME_FLAG_HOST|RESUME_FLAG_NV)
+
+#endif /* __POWERPC_KVM_ASM_H__ */
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
new file mode 100644
index 000000000000..2655e2a4831e
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -0,0 +1,155 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2007
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __POWERPC_KVM_HOST_H__
+#define __POWERPC_KVM_HOST_H__
+
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/kvm_types.h>
+#include <asm/kvm_asm.h>
+
+#define KVM_MAX_VCPUS 1
+#define KVM_MEMORY_SLOTS 32
+/* memory slots that does not exposed to userspace */
+#define KVM_PRIVATE_MEM_SLOTS 4
+
+#define KVM_COALESCED_MMIO_PAGE_OFFSET 1
+
+/* We don't currently support large pages. */
+#define KVM_PAGES_PER_HPAGE (1<<31)
+
+struct kvm;
+struct kvm_run;
+struct kvm_vcpu;
+
+struct kvm_vm_stat {
+	u32 remote_tlb_flush;
+};
+
+struct kvm_vcpu_stat {
+	u32 sum_exits;
+	u32 mmio_exits;
+	u32 dcr_exits;
+	u32 signal_exits;
+	u32 light_exits;
+	/* Account for special types of light exits: */
+	u32 itlb_real_miss_exits;
+	u32 itlb_virt_miss_exits;
+	u32 dtlb_real_miss_exits;
+	u32 dtlb_virt_miss_exits;
+	u32 syscall_exits;
+	u32 isi_exits;
+	u32 dsi_exits;
+	u32 emulated_inst_exits;
+	u32 dec_exits;
+	u32 ext_intr_exits;
+	u32 halt_wakeup;
+};
+
+struct tlbe {
+	u32 tid; /* Only the low 8 bits are used. */
+	u32 word0;
+	u32 word1;
+	u32 word2;
+};
+
+struct kvm_arch {
+};
+
+struct kvm_vcpu_arch {
+	/* Unmodified copy of the guest's TLB. */
+	struct tlbe guest_tlb[PPC44x_TLB_SIZE];
+	/* TLB that's actually used when the guest is running. */
+	struct tlbe shadow_tlb[PPC44x_TLB_SIZE];
+	/* Pages which are referenced in the shadow TLB. */
+	struct page *shadow_pages[PPC44x_TLB_SIZE];
+	/* Copy of the host's TLB. */
+	struct tlbe host_tlb[PPC44x_TLB_SIZE];
+
+	u32 host_stack;
+	u32 host_pid;
+
+	u64 fpr[32];
+	u32 gpr[32];
+
+	u32 pc;
+	u32 cr;
+	u32 ctr;
+	u32 lr;
+	u32 xer;
+
+	u32 msr;
+	u32 mmucr;
+	u32 sprg0;
+	u32 sprg1;
+	u32 sprg2;
+	u32 sprg3;
+	u32 sprg4;
+	u32 sprg5;
+	u32 sprg6;
+	u32 sprg7;
+	u32 srr0;
+	u32 srr1;
+	u32 csrr0;
+	u32 csrr1;
+	u32 dsrr0;
+	u32 dsrr1;
+	u32 dear;
+	u32 esr;
+	u32 dec;
+	u32 decar;
+	u32 tbl;
+	u32 tbu;
+	u32 tcr;
+	u32 tsr;
+	u32 ivor[16];
+	u32 ivpr;
+	u32 pir;
+	u32 pid;
+	u32 pvr;
+	u32 ccr0;
+	u32 ccr1;
+	u32 dbcr0;
+	u32 dbcr1;
+
+	u32 last_inst;
+	u32 fault_dear;
+	u32 fault_esr;
+	gpa_t paddr_accessed;
+
+	u8 io_gpr; /* GPR used as IO source/target */
+	u8 mmio_is_bigendian;
+	u8 dcr_needed;
+	u8 dcr_is_write;
+
+	u32 cpr0_cfgaddr; /* holds the last set cpr0_cfgaddr */
+
+	struct timer_list dec_timer;
+	unsigned long pending_exceptions;
+};
+
+struct kvm_guest_debug {
+	int enabled;
+	unsigned long bp[4];
+	int singlestep;
+};
+
+#endif /* __POWERPC_KVM_HOST_H__ */
diff --git a/arch/powerpc/include/asm/kvm_para.h b/arch/powerpc/include/asm/kvm_para.h
new file mode 100644
index 000000000000..2d48f6a63d0b
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_para.h
@@ -0,0 +1,37 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __POWERPC_KVM_PARA_H__
+#define __POWERPC_KVM_PARA_H__
+
+#ifdef __KERNEL__
+
+static inline int kvm_para_available(void)
+{
+	return 0;
+}
+
+static inline unsigned int kvm_arch_para_features(void)
+{
+	return 0;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* __POWERPC_KVM_PARA_H__ */
diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
new file mode 100644
index 000000000000..a8b068792260
--- /dev/null
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -0,0 +1,95 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * Authors: Hollis Blanchard <hollisb@us.ibm.com>
+ */
+
+#ifndef __POWERPC_KVM_PPC_H__
+#define __POWERPC_KVM_PPC_H__
+
+/* This file exists just so we can dereference kvm_vcpu, avoiding nested header
+ * dependencies. */
+
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/kvm_types.h>
+#include <linux/kvm_host.h>
+
+struct kvm_tlb {
+	struct tlbe guest_tlb[PPC44x_TLB_SIZE];
+	struct tlbe shadow_tlb[PPC44x_TLB_SIZE];
+};
+
+enum emulation_result {
+	EMULATE_DONE,         /* no further processing */
+	EMULATE_DO_MMIO,      /* kvm_run filled with MMIO request */
+	EMULATE_DO_DCR,       /* kvm_run filled with DCR request */
+	EMULATE_FAIL,         /* can't emulate this instruction */
+};
+
+extern const unsigned char exception_priority[];
+extern const unsigned char priority_exception[];
+
+extern int __kvmppc_vcpu_run(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu);
+extern char kvmppc_handlers_start[];
+extern unsigned long kvmppc_handler_len;
+
+extern void kvmppc_dump_vcpu(struct kvm_vcpu *vcpu);
+extern int kvmppc_handle_load(struct kvm_run *run, struct kvm_vcpu *vcpu,
+                              unsigned int rt, unsigned int bytes,
+                              int is_bigendian);
+extern int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu,
+                               u32 val, unsigned int bytes, int is_bigendian);
+
+extern int kvmppc_emulate_instruction(struct kvm_run *run,
+                                      struct kvm_vcpu *vcpu);
+extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu);
+
+extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn,
+                           u64 asid, u32 flags);
+extern void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr,
+                                  gva_t eend, u32 asid);
+extern void kvmppc_mmu_priv_switch(struct kvm_vcpu *vcpu, int usermode);
+
+extern void kvmppc_check_and_deliver_interrupts(struct kvm_vcpu *vcpu);
+
+static inline void kvmppc_queue_exception(struct kvm_vcpu *vcpu, int exception)
+{
+	unsigned int priority = exception_priority[exception];
+	set_bit(priority, &vcpu->arch.pending_exceptions);
+}
+
+static inline void kvmppc_clear_exception(struct kvm_vcpu *vcpu, int exception)
+{
+	unsigned int priority = exception_priority[exception];
+	clear_bit(priority, &vcpu->arch.pending_exceptions);
+}
+
+/* Helper function for "full" MSR writes. No need to call this if only EE is
+ * changing. */
+static inline void kvmppc_set_msr(struct kvm_vcpu *vcpu, u32 new_msr)
+{
+	if ((new_msr & MSR_PR) != (vcpu->arch.msr & MSR_PR))
+		kvmppc_mmu_priv_switch(vcpu, new_msr & MSR_PR);
+
+	vcpu->arch.msr = new_msr;
+
+	if (vcpu->arch.msr & MSR_WE)
+		kvm_vcpu_block(vcpu);
+}
+
+#endif /* __POWERPC_KVM_PPC_H__ */
diff --git a/arch/powerpc/include/asm/libata-portmap.h b/arch/powerpc/include/asm/libata-portmap.h
new file mode 100644
index 000000000000..4d8518049f4d
--- /dev/null
+++ b/arch/powerpc/include/asm/libata-portmap.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_POWERPC_LIBATA_PORTMAP_H
+#define __ASM_POWERPC_LIBATA_PORTMAP_H
+
+#define ATA_PRIMARY_CMD	0x1F0
+#define ATA_PRIMARY_CTL	0x3F6
+#define ATA_PRIMARY_IRQ(dev)	pci_get_legacy_ide_irq(dev, 0)
+
+#define ATA_SECONDARY_CMD	0x170
+#define ATA_SECONDARY_CTL	0x376
+#define ATA_SECONDARY_IRQ(dev)	pci_get_legacy_ide_irq(dev, 1)
+
+#endif
diff --git a/arch/powerpc/include/asm/linkage.h b/arch/powerpc/include/asm/linkage.h
new file mode 100644
index 000000000000..e1c4ac1cc4ba
--- /dev/null
+++ b/arch/powerpc/include/asm/linkage.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_POWERPC_LINKAGE_H
+#define _ASM_POWERPC_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif	/* _ASM_POWERPC_LINKAGE_H */
diff --git a/arch/powerpc/include/asm/lmb.h b/arch/powerpc/include/asm/lmb.h
new file mode 100644
index 000000000000..6f5fdf0a19ae
--- /dev/null
+++ b/arch/powerpc/include/asm/lmb.h
@@ -0,0 +1,15 @@
+#ifndef _ASM_POWERPC_LMB_H
+#define _ASM_POWERPC_LMB_H
+
+#include <asm/udbg.h>
+
+#define LMB_DBG(fmt...) udbg_printf(fmt)
+
+#ifdef CONFIG_PPC32
+extern phys_addr_t lowmem_end_addr;
+#define LMB_REAL_LIMIT	lowmem_end_addr
+#else
+#define LMB_REAL_LIMIT	0
+#endif
+
+#endif /* _ASM_POWERPC_LMB_H */
diff --git a/arch/powerpc/include/asm/local.h b/arch/powerpc/include/asm/local.h
new file mode 100644
index 000000000000..612d83276653
--- /dev/null
+++ b/arch/powerpc/include/asm/local.h
@@ -0,0 +1,200 @@
+#ifndef _ARCH_POWERPC_LOCAL_H
+#define _ARCH_POWERPC_LOCAL_H
+
+#include <linux/percpu.h>
+#include <asm/atomic.h>
+
+typedef struct
+{
+	atomic_long_t a;
+} local_t;
+
+#define LOCAL_INIT(i)	{ ATOMIC_LONG_INIT(i) }
+
+#define local_read(l)	atomic_long_read(&(l)->a)
+#define local_set(l,i)	atomic_long_set(&(l)->a, (i))
+
+#define local_add(i,l)	atomic_long_add((i),(&(l)->a))
+#define local_sub(i,l)	atomic_long_sub((i),(&(l)->a))
+#define local_inc(l)	atomic_long_inc(&(l)->a)
+#define local_dec(l)	atomic_long_dec(&(l)->a)
+
+static __inline__ long local_add_return(long a, local_t *l)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX	"%0,0,%2		# local_add_return\n\
+	add	%0,%1,%0\n"
+	PPC405_ERR77(0,%2)
+	PPC_STLCX	"%0,0,%2 \n\
+	bne-	1b"
+	: "=&r" (t)
+	: "r" (a), "r" (&(l->a.counter))
+	: "cc", "memory");
+
+	return t;
+}
+
+#define local_add_negative(a, l)	(local_add_return((a), (l)) < 0)
+
+static __inline__ long local_sub_return(long a, local_t *l)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX	"%0,0,%2		# local_sub_return\n\
+	subf	%0,%1,%0\n"
+	PPC405_ERR77(0,%2)
+	PPC_STLCX	"%0,0,%2 \n\
+	bne-	1b"
+	: "=&r" (t)
+	: "r" (a), "r" (&(l->a.counter))
+	: "cc", "memory");
+
+	return t;
+}
+
+static __inline__ long local_inc_return(local_t *l)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX	"%0,0,%1		# local_inc_return\n\
+	addic	%0,%0,1\n"
+	PPC405_ERR77(0,%1)
+	PPC_STLCX	"%0,0,%1 \n\
+	bne-	1b"
+	: "=&r" (t)
+	: "r" (&(l->a.counter))
+	: "cc", "memory");
+
+	return t;
+}
+
+/*
+ * local_inc_and_test - increment and test
+ * @l: pointer of type local_t
+ *
+ * Atomically increments @l by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define local_inc_and_test(l) (local_inc_return(l) == 0)
+
+static __inline__ long local_dec_return(local_t *l)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX	"%0,0,%1		# local_dec_return\n\
+	addic	%0,%0,-1\n"
+	PPC405_ERR77(0,%1)
+	PPC_STLCX	"%0,0,%1\n\
+	bne-	1b"
+	: "=&r" (t)
+	: "r" (&(l->a.counter))
+	: "cc", "memory");
+
+	return t;
+}
+
+#define local_cmpxchg(l, o, n) \
+	(cmpxchg_local(&((l)->a.counter), (o), (n)))
+#define local_xchg(l, n) (xchg_local(&((l)->a.counter), (n)))
+
+/**
+ * local_add_unless - add unless the number is a given value
+ * @l: pointer of type local_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @l, so long as it was not @u.
+ * Returns non-zero if @l was not @u, and zero otherwise.
+ */
+static __inline__ int local_add_unless(local_t *l, long a, long u)
+{
+	long t;
+
+	__asm__ __volatile__ (
+"1:"	PPC_LLARX	"%0,0,%1		# local_add_unless\n\
+	cmpw	0,%0,%3 \n\
+	beq-	2f \n\
+	add	%0,%2,%0 \n"
+	PPC405_ERR77(0,%2)
+	PPC_STLCX	"%0,0,%1 \n\
+	bne-	1b \n"
+"	subf	%0,%2,%0 \n\
+2:"
+	: "=&r" (t)
+	: "r" (&(l->a.counter)), "r" (a), "r" (u)
+	: "cc", "memory");
+
+	return t != u;
+}
+
+#define local_inc_not_zero(l) local_add_unless((l), 1, 0)
+
+#define local_sub_and_test(a, l)	(local_sub_return((a), (l)) == 0)
+#define local_dec_and_test(l)		(local_dec_return((l)) == 0)
+
+/*
+ * Atomically test *l and decrement if it is greater than 0.
+ * The function returns the old value of *l minus 1.
+ */
+static __inline__ long local_dec_if_positive(local_t *l)
+{
+	long t;
+
+	__asm__ __volatile__(
+"1:"	PPC_LLARX	"%0,0,%1		# local_dec_if_positive\n\
+	cmpwi	%0,1\n\
+	addi	%0,%0,-1\n\
+	blt-	2f\n"
+	PPC405_ERR77(0,%1)
+	PPC_STLCX	"%0,0,%1\n\
+	bne-	1b"
+	"\n\
+2:"	: "=&b" (t)
+	: "r" (&(l->a.counter))
+	: "cc", "memory");
+
+	return t;
+}
+
+/* Use these for per-cpu local_t variables: on some archs they are
+ * much more efficient than these naive implementations.  Note they take
+ * a variable, not an address.
+ */
+
+#define __local_inc(l)		((l)->a.counter++)
+#define __local_dec(l)		((l)->a.counter++)
+#define __local_add(i,l)	((l)->a.counter+=(i))
+#define __local_sub(i,l)	((l)->a.counter-=(i))
+
+/* Need to disable preemption for the cpu local counters otherwise we could
+   still access a variable of a previous CPU in a non atomic way. */
+#define cpu_local_wrap_v(l)	 	\
+	({ local_t res__;		\
+	   preempt_disable(); 		\
+	   res__ = (l);			\
+	   preempt_enable();		\
+	   res__; })
+#define cpu_local_wrap(l)		\
+	({ preempt_disable();		\
+	   l;				\
+	   preempt_enable(); })		\
+
+#define cpu_local_read(l)    cpu_local_wrap_v(local_read(&__get_cpu_var(l)))
+#define cpu_local_set(l, i)  cpu_local_wrap(local_set(&__get_cpu_var(l), (i)))
+#define cpu_local_inc(l)     cpu_local_wrap(local_inc(&__get_cpu_var(l)))
+#define cpu_local_dec(l)     cpu_local_wrap(local_dec(&__get_cpu_var(l)))
+#define cpu_local_add(i, l)  cpu_local_wrap(local_add((i), &__get_cpu_var(l)))
+#define cpu_local_sub(i, l)  cpu_local_wrap(local_sub((i), &__get_cpu_var(l)))
+
+#define __cpu_local_inc(l)	cpu_local_inc(l)
+#define __cpu_local_dec(l)	cpu_local_dec(l)
+#define __cpu_local_add(i, l)	cpu_local_add((i), (l))
+#define __cpu_local_sub(i, l)	cpu_local_sub((i), (l))
+
+#endif /* _ARCH_POWERPC_LOCAL_H */
diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h
new file mode 100644
index 000000000000..2fe268b10333
--- /dev/null
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -0,0 +1,159 @@
+/*
+ * lppaca.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_LPPACA_H
+#define _ASM_POWERPC_LPPACA_H
+#ifdef __KERNEL__
+
+//=============================================================================
+//
+//	This control block contains the data that is shared between the
+//	hypervisor (PLIC) and the OS.
+//
+//
+//----------------------------------------------------------------------------
+#include <linux/cache.h>
+#include <asm/types.h>
+#include <asm/mmu.h>
+
+/* The Hypervisor barfs if the lppaca crosses a page boundary.  A 1k
+ * alignment is sufficient to prevent this */
+struct lppaca {
+//=============================================================================
+// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data
+// NOTE: The xDynXyz fields are fields that will be dynamically changed by
+// PLIC when preparing to bring a processor online or when dispatching a
+// virtual processor!
+//=============================================================================
+	u32	desc;			// Eye catcher 0xD397D781	x00-x03
+	u16	size;			// Size of this struct		x04-x05
+	u16	reserved1;		// Reserved			x06-x07
+	u16	reserved2:14;		// Reserved			x08-x09
+	u8	shared_proc:1;		// Shared processor indicator	...
+	u8	secondary_thread:1;	// Secondary thread indicator	...
+	volatile u8 dyn_proc_status:8;	// Dynamic Status of this proc	x0A-x0A
+	u8	secondary_thread_count;	// Secondary thread count	x0B-x0B
+	volatile u16 dyn_hv_phys_proc_index;// Dynamic HV Physical Proc Index0C-x0D
+	volatile u16 dyn_hv_log_proc_index;// Dynamic HV Logical Proc Indexx0E-x0F
+	u32	decr_val;   		// Value for Decr programming 	x10-x13
+	u32	pmc_val;       		// Value for PMC regs         	x14-x17
+	volatile u32 dyn_hw_node_id;	// Dynamic Hardware Node id	x18-x1B
+	volatile u32 dyn_hw_proc_id;	// Dynamic Hardware Proc Id	x1C-x1F
+	volatile u32 dyn_pir;		// Dynamic ProcIdReg value	x20-x23
+	u32	dsei_data;           	// DSEI data                  	x24-x27
+	u64	sprg3;               	// SPRG3 value                	x28-x2F
+	u8	reserved3[80];		// Reserved			x30-x7F
+
+//=============================================================================
+// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data
+//=============================================================================
+	// This Dword contains a byte for each type of interrupt that can occur.
+	// The IPI is a count while the others are just a binary 1 or 0.
+	union {
+		u64	any_int;
+		struct {
+			u16	reserved;	// Reserved - cleared by #mpasmbl
+			u8	xirr_int;	// Indicates xXirrValue is valid or Immed IO
+			u8	ipi_cnt;	// IPI Count
+			u8	decr_int;	// DECR interrupt occurred
+			u8	pdc_int;	// PDC interrupt occurred
+			u8	quantum_int;	// Interrupt quantum reached
+			u8	old_plic_deferred_ext_int;	// Old PLIC has a deferred XIRR pending
+		} fields;
+	} int_dword;
+
+	// Whenever any fields in this Dword are set then PLIC will defer the
+	// processing of external interrupts.  Note that PLIC will store the
+	// XIRR directly into the xXirrValue field so that another XIRR will
+	// not be presented until this one clears.  The layout of the low
+	// 4-bytes of this Dword is upto SLIC - PLIC just checks whether the
+	// entire Dword is zero or not.  A non-zero value in the low order
+	// 2-bytes will result in SLIC being granted the highest thread
+	// priority upon return.  A 0 will return to SLIC as medium priority.
+	u64	plic_defer_ints_area;	// Entire Dword
+
+	// Used to pass the real SRR0/1 from PLIC to SLIC as well as to
+	// pass the target SRR0/1 from SLIC to PLIC on a SetAsrAndRfid.
+	u64	saved_srr0;		// Saved SRR0                   x10-x17
+	u64	saved_srr1;		// Saved SRR1                   x18-x1F
+
+	// Used to pass parms from the OS to PLIC for SetAsrAndRfid
+	u64	saved_gpr3;		// Saved GPR3                   x20-x27
+	u64	saved_gpr4;		// Saved GPR4                   x28-x2F
+	u64	saved_gpr5;		// Saved GPR5                   x30-x37
+
+	u8	reserved4;		// Reserved			x38-x38
+	u8	donate_dedicated_cpu;	// Donate dedicated CPU cycles  x39-x39
+	u8	fpregs_in_use;		// FP regs in use               x3A-x3A
+	u8	pmcregs_in_use;		// PMC regs in use              x3B-x3B
+	volatile u32 saved_decr;	// Saved Decr Value             x3C-x3F
+	volatile u64 emulated_time_base;// Emulated TB for this thread  x40-x47
+	volatile u64 cur_plic_latency;	// Unaccounted PLIC latency     x48-x4F
+	u64	tot_plic_latency;	// Accumulated PLIC latency     x50-x57
+	u64	wait_state_cycles;	// Wait cycles for this proc    x58-x5F
+	u64	end_of_quantum;		// TB at end of quantum         x60-x67
+	u64	pdc_saved_sprg1;	// Saved SPRG1 for PMC int      x68-x6F
+	u64	pdc_saved_srr0;		// Saved SRR0 for PMC int       x70-x77
+	volatile u32 virtual_decr;	// Virtual DECR for shared procsx78-x7B
+	u16	slb_count;		// # of SLBs to maintain        x7C-x7D
+	u8	idle;			// Indicate OS is idle          x7E
+	u8	vmxregs_in_use;		// VMX registers in use         x7F
+
+
+//=============================================================================
+// CACHE_LINE_3 0x0100 - 0x017F: This line is shared with other processors
+//=============================================================================
+	// This is the yield_count.  An "odd" value (low bit on) means that
+	// the processor is yielded (either because of an OS yield or a PLIC
+	// preempt).  An even value implies that the processor is currently
+	// executing.
+	// NOTE: This value will ALWAYS be zero for dedicated processors and
+	// will NEVER be zero for shared processors (ie, initialized to a 1).
+	volatile u32 yield_count;	// PLIC increments each dispatchx00-x03
+	u32 reserved6;
+	volatile u64 cmo_faults;	// CMO page fault count         x08-x0F
+	volatile u64 cmo_fault_time;	// CMO page fault time          x10-x17
+	u8	reserved7[104];		// Reserved                     x18-x7F
+
+//=============================================================================
+// CACHE_LINE_4-5 0x0180 - 0x027F Contains PMC interrupt data
+//=============================================================================
+	u8	pmc_save_area[256];	// PMC interrupt Area           x00-xFF
+} __attribute__((__aligned__(0x400)));
+
+extern struct lppaca lppaca[];
+
+/*
+ * SLB shadow buffer structure as defined in the PAPR.  The save_area
+ * contains adjacent ESID and VSID pairs for each shadowed SLB.  The
+ * ESID is stored in the lower 64bits, then the VSID.
+ */
+struct slb_shadow {
+	u32	persistent;		// Number of persistent SLBs	x00-x03
+	u32	buffer_length;		// Total shadow buffer length	x04-x07
+	u64	reserved;		// Alignment			x08-x0f
+	struct	{
+		u64     esid;
+		u64	vsid;
+	} save_area[SLB_NUM_BOLTED];	//				x10-x40
+} ____cacheline_aligned;
+
+extern struct slb_shadow slb_shadow[];
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_LPPACA_H */
diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h
new file mode 100644
index 000000000000..81713acf7529
--- /dev/null
+++ b/arch/powerpc/include/asm/lv1call.h
@@ -0,0 +1,348 @@
+/*
+ *  PS3 hvcall interface.
+ *
+ *  Copyright (C) 2006 Sony Computer Entertainment Inc.
+ *  Copyright 2006 Sony Corp.
+ *  Copyright 2003, 2004 (c) MontaVista Software, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(_ASM_POWERPC_LV1CALL_H)
+#define _ASM_POWERPC_LV1CALL_H
+
+#if !defined(__ASSEMBLY__)
+
+#include <linux/types.h>
+
+/* lv1 call declaration macros */
+
+#define LV1_1_IN_ARG_DECL u64 in_1
+#define LV1_2_IN_ARG_DECL LV1_1_IN_ARG_DECL, u64 in_2
+#define LV1_3_IN_ARG_DECL LV1_2_IN_ARG_DECL, u64 in_3
+#define LV1_4_IN_ARG_DECL LV1_3_IN_ARG_DECL, u64 in_4
+#define LV1_5_IN_ARG_DECL LV1_4_IN_ARG_DECL, u64 in_5
+#define LV1_6_IN_ARG_DECL LV1_5_IN_ARG_DECL, u64 in_6
+#define LV1_7_IN_ARG_DECL LV1_6_IN_ARG_DECL, u64 in_7
+#define LV1_8_IN_ARG_DECL LV1_7_IN_ARG_DECL, u64 in_8
+#define LV1_1_OUT_ARG_DECL u64 *out_1
+#define LV1_2_OUT_ARG_DECL LV1_1_OUT_ARG_DECL, u64 *out_2
+#define LV1_3_OUT_ARG_DECL LV1_2_OUT_ARG_DECL, u64 *out_3
+#define LV1_4_OUT_ARG_DECL LV1_3_OUT_ARG_DECL, u64 *out_4
+#define LV1_5_OUT_ARG_DECL LV1_4_OUT_ARG_DECL, u64 *out_5
+#define LV1_6_OUT_ARG_DECL LV1_5_OUT_ARG_DECL, u64 *out_6
+#define LV1_7_OUT_ARG_DECL LV1_6_OUT_ARG_DECL, u64 *out_7
+
+#define LV1_0_IN_0_OUT_ARG_DECL void
+#define LV1_1_IN_0_OUT_ARG_DECL LV1_1_IN_ARG_DECL
+#define LV1_2_IN_0_OUT_ARG_DECL LV1_2_IN_ARG_DECL
+#define LV1_3_IN_0_OUT_ARG_DECL LV1_3_IN_ARG_DECL
+#define LV1_4_IN_0_OUT_ARG_DECL LV1_4_IN_ARG_DECL
+#define LV1_5_IN_0_OUT_ARG_DECL LV1_5_IN_ARG_DECL
+#define LV1_6_IN_0_OUT_ARG_DECL LV1_6_IN_ARG_DECL
+#define LV1_7_IN_0_OUT_ARG_DECL LV1_7_IN_ARG_DECL
+
+#define LV1_0_IN_1_OUT_ARG_DECL                    LV1_1_OUT_ARG_DECL
+#define LV1_1_IN_1_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_2_IN_1_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_3_IN_1_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_4_IN_1_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_5_IN_1_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_6_IN_1_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_7_IN_1_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+#define LV1_8_IN_1_OUT_ARG_DECL LV1_8_IN_ARG_DECL, LV1_1_OUT_ARG_DECL
+
+#define LV1_0_IN_2_OUT_ARG_DECL                    LV1_2_OUT_ARG_DECL
+#define LV1_1_IN_2_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_2_IN_2_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_3_IN_2_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_4_IN_2_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_5_IN_2_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_6_IN_2_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+#define LV1_7_IN_2_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_2_OUT_ARG_DECL
+
+#define LV1_0_IN_3_OUT_ARG_DECL                    LV1_3_OUT_ARG_DECL
+#define LV1_1_IN_3_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_2_IN_3_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_3_IN_3_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_4_IN_3_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_5_IN_3_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_6_IN_3_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+#define LV1_7_IN_3_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_3_OUT_ARG_DECL
+
+#define LV1_0_IN_4_OUT_ARG_DECL                    LV1_4_OUT_ARG_DECL
+#define LV1_1_IN_4_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_2_IN_4_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_3_IN_4_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_4_IN_4_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_5_IN_4_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_6_IN_4_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+#define LV1_7_IN_4_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_4_OUT_ARG_DECL
+
+#define LV1_0_IN_5_OUT_ARG_DECL                    LV1_5_OUT_ARG_DECL
+#define LV1_1_IN_5_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_2_IN_5_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_3_IN_5_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_4_IN_5_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_5_IN_5_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_6_IN_5_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+#define LV1_7_IN_5_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_5_OUT_ARG_DECL
+
+#define LV1_0_IN_6_OUT_ARG_DECL                    LV1_6_OUT_ARG_DECL
+#define LV1_1_IN_6_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_2_IN_6_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_3_IN_6_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_4_IN_6_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_5_IN_6_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_6_IN_6_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+#define LV1_7_IN_6_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_6_OUT_ARG_DECL
+
+#define LV1_0_IN_7_OUT_ARG_DECL                    LV1_7_OUT_ARG_DECL
+#define LV1_1_IN_7_OUT_ARG_DECL LV1_1_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_2_IN_7_OUT_ARG_DECL LV1_2_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_3_IN_7_OUT_ARG_DECL LV1_3_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_4_IN_7_OUT_ARG_DECL LV1_4_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_5_IN_7_OUT_ARG_DECL LV1_5_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_6_IN_7_OUT_ARG_DECL LV1_6_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+#define LV1_7_IN_7_OUT_ARG_DECL LV1_7_IN_ARG_DECL, LV1_7_OUT_ARG_DECL
+
+#define LV1_1_IN_ARGS in_1
+#define LV1_2_IN_ARGS LV1_1_IN_ARGS, in_2
+#define LV1_3_IN_ARGS LV1_2_IN_ARGS, in_3
+#define LV1_4_IN_ARGS LV1_3_IN_ARGS, in_4
+#define LV1_5_IN_ARGS LV1_4_IN_ARGS, in_5
+#define LV1_6_IN_ARGS LV1_5_IN_ARGS, in_6
+#define LV1_7_IN_ARGS LV1_6_IN_ARGS, in_7
+#define LV1_8_IN_ARGS LV1_7_IN_ARGS, in_8
+
+#define LV1_1_OUT_ARGS out_1
+#define LV1_2_OUT_ARGS LV1_1_OUT_ARGS, out_2
+#define LV1_3_OUT_ARGS LV1_2_OUT_ARGS, out_3
+#define LV1_4_OUT_ARGS LV1_3_OUT_ARGS, out_4
+#define LV1_5_OUT_ARGS LV1_4_OUT_ARGS, out_5
+#define LV1_6_OUT_ARGS LV1_5_OUT_ARGS, out_6
+#define LV1_7_OUT_ARGS LV1_6_OUT_ARGS, out_7
+
+#define LV1_0_IN_0_OUT_ARGS
+#define LV1_1_IN_0_OUT_ARGS LV1_1_IN_ARGS
+#define LV1_2_IN_0_OUT_ARGS LV1_2_IN_ARGS
+#define LV1_3_IN_0_OUT_ARGS LV1_3_IN_ARGS
+#define LV1_4_IN_0_OUT_ARGS LV1_4_IN_ARGS
+#define LV1_5_IN_0_OUT_ARGS LV1_5_IN_ARGS
+#define LV1_6_IN_0_OUT_ARGS LV1_6_IN_ARGS
+#define LV1_7_IN_0_OUT_ARGS LV1_7_IN_ARGS
+
+#define LV1_0_IN_1_OUT_ARGS                LV1_1_OUT_ARGS
+#define LV1_1_IN_1_OUT_ARGS LV1_1_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_2_IN_1_OUT_ARGS LV1_2_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_3_IN_1_OUT_ARGS LV1_3_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_4_IN_1_OUT_ARGS LV1_4_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_5_IN_1_OUT_ARGS LV1_5_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_6_IN_1_OUT_ARGS LV1_6_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_7_IN_1_OUT_ARGS LV1_7_IN_ARGS, LV1_1_OUT_ARGS
+#define LV1_8_IN_1_OUT_ARGS LV1_8_IN_ARGS, LV1_1_OUT_ARGS
+
+#define LV1_0_IN_2_OUT_ARGS                LV1_2_OUT_ARGS
+#define LV1_1_IN_2_OUT_ARGS LV1_1_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_2_IN_2_OUT_ARGS LV1_2_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_3_IN_2_OUT_ARGS LV1_3_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_4_IN_2_OUT_ARGS LV1_4_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_5_IN_2_OUT_ARGS LV1_5_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_6_IN_2_OUT_ARGS LV1_6_IN_ARGS, LV1_2_OUT_ARGS
+#define LV1_7_IN_2_OUT_ARGS LV1_7_IN_ARGS, LV1_2_OUT_ARGS
+
+#define LV1_0_IN_3_OUT_ARGS                LV1_3_OUT_ARGS
+#define LV1_1_IN_3_OUT_ARGS LV1_1_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_2_IN_3_OUT_ARGS LV1_2_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_3_IN_3_OUT_ARGS LV1_3_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_4_IN_3_OUT_ARGS LV1_4_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_5_IN_3_OUT_ARGS LV1_5_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_6_IN_3_OUT_ARGS LV1_6_IN_ARGS, LV1_3_OUT_ARGS
+#define LV1_7_IN_3_OUT_ARGS LV1_7_IN_ARGS, LV1_3_OUT_ARGS
+
+#define LV1_0_IN_4_OUT_ARGS                LV1_4_OUT_ARGS
+#define LV1_1_IN_4_OUT_ARGS LV1_1_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_2_IN_4_OUT_ARGS LV1_2_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_3_IN_4_OUT_ARGS LV1_3_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_4_IN_4_OUT_ARGS LV1_4_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_5_IN_4_OUT_ARGS LV1_5_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_6_IN_4_OUT_ARGS LV1_6_IN_ARGS, LV1_4_OUT_ARGS
+#define LV1_7_IN_4_OUT_ARGS LV1_7_IN_ARGS, LV1_4_OUT_ARGS
+
+#define LV1_0_IN_5_OUT_ARGS                LV1_5_OUT_ARGS
+#define LV1_1_IN_5_OUT_ARGS LV1_1_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_2_IN_5_OUT_ARGS LV1_2_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_3_IN_5_OUT_ARGS LV1_3_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_4_IN_5_OUT_ARGS LV1_4_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_5_IN_5_OUT_ARGS LV1_5_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_6_IN_5_OUT_ARGS LV1_6_IN_ARGS, LV1_5_OUT_ARGS
+#define LV1_7_IN_5_OUT_ARGS LV1_7_IN_ARGS, LV1_5_OUT_ARGS
+
+#define LV1_0_IN_6_OUT_ARGS                LV1_6_OUT_ARGS
+#define LV1_1_IN_6_OUT_ARGS LV1_1_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_2_IN_6_OUT_ARGS LV1_2_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_3_IN_6_OUT_ARGS LV1_3_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_4_IN_6_OUT_ARGS LV1_4_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_5_IN_6_OUT_ARGS LV1_5_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_6_IN_6_OUT_ARGS LV1_6_IN_ARGS, LV1_6_OUT_ARGS
+#define LV1_7_IN_6_OUT_ARGS LV1_7_IN_ARGS, LV1_6_OUT_ARGS
+
+#define LV1_0_IN_7_OUT_ARGS                LV1_7_OUT_ARGS
+#define LV1_1_IN_7_OUT_ARGS LV1_1_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_2_IN_7_OUT_ARGS LV1_2_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_3_IN_7_OUT_ARGS LV1_3_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_4_IN_7_OUT_ARGS LV1_4_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_5_IN_7_OUT_ARGS LV1_5_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_6_IN_7_OUT_ARGS LV1_6_IN_ARGS, LV1_7_OUT_ARGS
+#define LV1_7_IN_7_OUT_ARGS LV1_7_IN_ARGS, LV1_7_OUT_ARGS
+
+/*
+ * This LV1_CALL() macro is for use by callers.  It expands into an
+ * inline call wrapper and an underscored HV call declaration.  The
+ * wrapper can be used to instrument the lv1 call interface.  The
+ * file lv1call.S defines its own LV1_CALL() macro to expand into
+ * the actual underscored call definition.
+ */
+
+#if !defined(LV1_CALL)
+#define LV1_CALL(name, in, out, num)                               \
+  extern s64 _lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL);      \
+  static inline int lv1_##name(LV1_##in##_IN_##out##_OUT_ARG_DECL) \
+    {return _lv1_##name(LV1_##in##_IN_##out##_OUT_ARGS);}
+#endif
+
+#endif /* !defined(__ASSEMBLY__) */
+
+/* lv1 call table */
+
+LV1_CALL(allocate_memory,                               4, 2,   0 )
+LV1_CALL(write_htab_entry,                              4, 0,   1 )
+LV1_CALL(construct_virtual_address_space,               3, 2,   2 )
+LV1_CALL(invalidate_htab_entries,                       5, 0,   3 )
+LV1_CALL(get_virtual_address_space_id_of_ppe,           1, 1,   4 )
+LV1_CALL(query_logical_partition_address_region_info,   1, 5,   6 )
+LV1_CALL(select_virtual_address_space,                  1, 0,   7 )
+LV1_CALL(pause,                                         1, 0,   9 )
+LV1_CALL(destruct_virtual_address_space,                1, 0,  10 )
+LV1_CALL(configure_irq_state_bitmap,                    3, 0,  11 )
+LV1_CALL(connect_irq_plug_ext,                          5, 0,  12 )
+LV1_CALL(release_memory,                                1, 0,  13 )
+LV1_CALL(put_iopte,                                     5, 0,  15 )
+LV1_CALL(disconnect_irq_plug_ext,                       3, 0,  17 )
+LV1_CALL(construct_event_receive_port,                  0, 1,  18 )
+LV1_CALL(destruct_event_receive_port,                   1, 0,  19 )
+LV1_CALL(send_event_locally,                            1, 0,  24 )
+LV1_CALL(end_of_interrupt,                              1, 0,  27 )
+LV1_CALL(connect_irq_plug,                              2, 0,  28 )
+LV1_CALL(disconnect_irq_plug,                           1, 0,  29 )
+LV1_CALL(end_of_interrupt_ext,                          3, 0,  30 )
+LV1_CALL(did_update_interrupt_mask,                     2, 0,  31 )
+LV1_CALL(shutdown_logical_partition,                    1, 0,  44 )
+LV1_CALL(destruct_logical_spe,                          1, 0,  54 )
+LV1_CALL(construct_logical_spe,                         7, 6,  57 )
+LV1_CALL(set_spe_interrupt_mask,                        3, 0,  61 )
+LV1_CALL(set_spe_transition_notifier,                   3, 0,  64 )
+LV1_CALL(disable_logical_spe,                           2, 0,  65 )
+LV1_CALL(clear_spe_interrupt_status,                    4, 0,  66 )
+LV1_CALL(get_spe_interrupt_status,                      2, 1,  67 )
+LV1_CALL(get_logical_ppe_id,                            0, 1,  69 )
+LV1_CALL(set_interrupt_mask,                            5, 0,  73 )
+LV1_CALL(get_logical_partition_id,                      0, 1,  74 )
+LV1_CALL(configure_execution_time_variable,             1, 0,  77 )
+LV1_CALL(get_spe_irq_outlet,                            2, 1,  78 )
+LV1_CALL(set_spe_privilege_state_area_1_register,       3, 0,  79 )
+LV1_CALL(create_repository_node,                        6, 0,  90 )
+LV1_CALL(get_repository_node_value,                     5, 2,  91 )
+LV1_CALL(modify_repository_node_value,                  6, 0,  92 )
+LV1_CALL(remove_repository_node,                        4, 0,  93 )
+LV1_CALL(read_htab_entries,                             2, 5,  95 )
+LV1_CALL(set_dabr,                                      2, 0,  96 )
+LV1_CALL(get_total_execution_time,                      2, 1, 103 )
+LV1_CALL(allocate_io_segment,                           3, 1, 116 )
+LV1_CALL(release_io_segment,                            2, 0, 117 )
+LV1_CALL(construct_io_irq_outlet,                       1, 1, 120 )
+LV1_CALL(destruct_io_irq_outlet,                        1, 0, 121 )
+LV1_CALL(map_htab,                                      1, 1, 122 )
+LV1_CALL(unmap_htab,                                    1, 0, 123 )
+LV1_CALL(get_version_info,                              0, 1, 127 )
+LV1_CALL(insert_htab_entry,                             6, 3, 158 )
+LV1_CALL(read_virtual_uart,                             3, 1, 162 )
+LV1_CALL(write_virtual_uart,                            3, 1, 163 )
+LV1_CALL(set_virtual_uart_param,                        3, 0, 164 )
+LV1_CALL(get_virtual_uart_param,                        2, 1, 165 )
+LV1_CALL(configure_virtual_uart_irq,                    1, 1, 166 )
+LV1_CALL(open_device,                                   3, 0, 170 )
+LV1_CALL(close_device,                                  2, 0, 171 )
+LV1_CALL(map_device_mmio_region,                        5, 1, 172 )
+LV1_CALL(unmap_device_mmio_region,                      3, 0, 173 )
+LV1_CALL(allocate_device_dma_region,                    5, 1, 174 )
+LV1_CALL(free_device_dma_region,                        3, 0, 175 )
+LV1_CALL(map_device_dma_region,                         6, 0, 176 )
+LV1_CALL(unmap_device_dma_region,                       4, 0, 177 )
+LV1_CALL(net_add_multicast_address,                     4, 0, 185 )
+LV1_CALL(net_remove_multicast_address,                  4, 0, 186 )
+LV1_CALL(net_start_tx_dma,                              4, 0, 187 )
+LV1_CALL(net_stop_tx_dma,                               3, 0, 188 )
+LV1_CALL(net_start_rx_dma,                              4, 0, 189 )
+LV1_CALL(net_stop_rx_dma,                               3, 0, 190 )
+LV1_CALL(net_set_interrupt_status_indicator,            4, 0, 191 )
+LV1_CALL(net_set_interrupt_mask,                        4, 0, 193 )
+LV1_CALL(net_control,                                   6, 2, 194 )
+LV1_CALL(connect_interrupt_event_receive_port,          4, 0, 197 )
+LV1_CALL(disconnect_interrupt_event_receive_port,       4, 0, 198 )
+LV1_CALL(get_spe_all_interrupt_statuses,                1, 1, 199 )
+LV1_CALL(deconfigure_virtual_uart_irq,                  0, 0, 202 )
+LV1_CALL(enable_logical_spe,                            2, 0, 207 )
+LV1_CALL(gpu_open,                                      1, 0, 210 )
+LV1_CALL(gpu_close,                                     0, 0, 211 )
+LV1_CALL(gpu_device_map,                                1, 2, 212 )
+LV1_CALL(gpu_device_unmap,                              1, 0, 213 )
+LV1_CALL(gpu_memory_allocate,                           5, 2, 214 )
+LV1_CALL(gpu_memory_free,                               1, 0, 216 )
+LV1_CALL(gpu_context_allocate,                          2, 5, 217 )
+LV1_CALL(gpu_context_free,                              1, 0, 218 )
+LV1_CALL(gpu_context_iomap,                             5, 0, 221 )
+LV1_CALL(gpu_context_attribute,                         6, 0, 225 )
+LV1_CALL(gpu_context_intr,                              1, 1, 227 )
+LV1_CALL(gpu_attribute,                                 5, 0, 228 )
+LV1_CALL(get_rtc,                                       0, 2, 232 )
+LV1_CALL(set_ppe_periodic_tracer_frequency,             1, 0, 240 )
+LV1_CALL(start_ppe_periodic_tracer,                     5, 0, 241 )
+LV1_CALL(stop_ppe_periodic_tracer,                      1, 1, 242 )
+LV1_CALL(storage_read,                                  6, 1, 245 )
+LV1_CALL(storage_write,                                 6, 1, 246 )
+LV1_CALL(storage_send_device_command,                   6, 1, 248 )
+LV1_CALL(storage_get_async_status,                      1, 2, 249 )
+LV1_CALL(storage_check_async_status,                    2, 1, 254 )
+LV1_CALL(panic,                                         1, 0, 255 )
+LV1_CALL(construct_lpm,                                 6, 3, 140 )
+LV1_CALL(destruct_lpm,                                  1, 0, 141 )
+LV1_CALL(start_lpm,                                     1, 0, 142 )
+LV1_CALL(stop_lpm,                                      1, 1, 143 )
+LV1_CALL(copy_lpm_trace_buffer,                         3, 1, 144 )
+LV1_CALL(add_lpm_event_bookmark,                        5, 0, 145 )
+LV1_CALL(delete_lpm_event_bookmark,                     3, 0, 146 )
+LV1_CALL(set_lpm_interrupt_mask,                        3, 1, 147 )
+LV1_CALL(get_lpm_interrupt_status,                      1, 1, 148 )
+LV1_CALL(set_lpm_general_control,                       5, 2, 149 )
+LV1_CALL(set_lpm_interval,                              3, 1, 150 )
+LV1_CALL(set_lpm_trigger_control,                       3, 1, 151 )
+LV1_CALL(set_lpm_counter_control,                       4, 1, 152 )
+LV1_CALL(set_lpm_group_control,                         3, 1, 153 )
+LV1_CALL(set_lpm_debug_bus_control,                     3, 1, 154 )
+LV1_CALL(set_lpm_counter,                               5, 2, 155 )
+LV1_CALL(set_lpm_signal,                                7, 0, 156 )
+LV1_CALL(set_lpm_spr_trigger,                           2, 0, 157 )
+
+#endif
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
new file mode 100644
index 000000000000..893aafd87fde
--- /dev/null
+++ b/arch/powerpc/include/asm/machdep.h
@@ -0,0 +1,365 @@
+#ifndef _ASM_POWERPC_MACHDEP_H
+#define _ASM_POWERPC_MACHDEP_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/seq_file.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/setup.h>
+
+/* We export this macro for external modules like Alsa to know if
+ * ppc_md.feature_call is implemented or not
+ */
+#define CONFIG_PPC_HAS_FEATURE_CALLS
+
+struct pt_regs;
+struct pci_bus;	
+struct device_node;
+struct iommu_table;
+struct rtc_time;
+struct file;
+struct pci_controller;
+#ifdef CONFIG_KEXEC
+struct kimage;
+#endif
+
+#ifdef CONFIG_SMP
+struct smp_ops_t {
+	void  (*message_pass)(int target, int msg);
+	int   (*probe)(void);
+	void  (*kick_cpu)(int nr);
+	void  (*setup_cpu)(int nr);
+	void  (*take_timebase)(void);
+	void  (*give_timebase)(void);
+	int   (*cpu_enable)(unsigned int nr);
+	int   (*cpu_disable)(void);
+	void  (*cpu_die)(unsigned int nr);
+	int   (*cpu_bootable)(unsigned int nr);
+};
+#endif
+
+struct machdep_calls {
+	char		*name;
+#ifdef CONFIG_PPC64
+	void            (*hpte_invalidate)(unsigned long slot,
+					   unsigned long va,
+					   int psize, int ssize,
+					   int local);
+	long		(*hpte_updatepp)(unsigned long slot, 
+					 unsigned long newpp, 
+					 unsigned long va,
+					 int psize, int ssize,
+					 int local);
+	void            (*hpte_updateboltedpp)(unsigned long newpp, 
+					       unsigned long ea,
+					       int psize, int ssize);
+	long		(*hpte_insert)(unsigned long hpte_group,
+				       unsigned long va,
+				       unsigned long prpn,
+				       unsigned long rflags,
+				       unsigned long vflags,
+				       int psize, int ssize);
+	long		(*hpte_remove)(unsigned long hpte_group);
+	void            (*hpte_removebolted)(unsigned long ea,
+					     int psize, int ssize);
+	void		(*flush_hash_range)(unsigned long number, int local);
+
+	/* special for kexec, to be called in real mode, linar mapping is
+	 * destroyed as well */
+	void		(*hpte_clear_all)(void);
+
+	int		(*tce_build)(struct iommu_table *tbl,
+				     long index,
+				     long npages,
+				     unsigned long uaddr,
+				     enum dma_data_direction direction,
+				     struct dma_attrs *attrs);
+	void		(*tce_free)(struct iommu_table *tbl,
+				    long index,
+				    long npages);
+	unsigned long	(*tce_get)(struct iommu_table *tbl,
+				    long index);
+	void		(*tce_flush)(struct iommu_table *tbl);
+	void		(*pci_dma_dev_setup)(struct pci_dev *dev);
+	void		(*pci_dma_bus_setup)(struct pci_bus *bus);
+
+	void __iomem *	(*ioremap)(phys_addr_t addr, unsigned long size,
+				   unsigned long flags);
+	void		(*iounmap)(volatile void __iomem *token);
+
+#ifdef CONFIG_PM
+	void		(*iommu_save)(void);
+	void		(*iommu_restore)(void);
+#endif
+#endif /* CONFIG_PPC64 */
+
+	int		(*probe)(void);
+	void		(*setup_arch)(void); /* Optional, may be NULL */
+	void		(*init_early)(void);
+	/* Optional, may be NULL. */
+	void		(*show_cpuinfo)(struct seq_file *m);
+	void		(*show_percpuinfo)(struct seq_file *m, int i);
+
+	void		(*init_IRQ)(void);
+	unsigned int	(*get_irq)(void);
+#ifdef CONFIG_KEXEC
+	void		(*kexec_cpu_down)(int crash_shutdown, int secondary);
+#endif
+
+	/* PCI stuff */
+	/* Called after scanning the bus, before allocating resources */
+	void		(*pcibios_fixup)(void);
+	int		(*pci_probe_mode)(struct pci_bus *);
+	void		(*pci_irq_fixup)(struct pci_dev *dev);
+
+	/* To setup PHBs when using automatic OF platform driver for PCI */
+	int		(*pci_setup_phb)(struct pci_controller *host);
+
+#ifdef CONFIG_PCI_MSI
+	int		(*msi_check_device)(struct pci_dev* dev,
+					    int nvec, int type);
+	int		(*setup_msi_irqs)(struct pci_dev *dev,
+					  int nvec, int type);
+	void		(*teardown_msi_irqs)(struct pci_dev *dev);
+#endif
+
+	void		(*restart)(char *cmd);
+	void		(*power_off)(void);
+	void		(*halt)(void);
+	void		(*panic)(char *str);
+	void		(*cpu_die)(void);
+
+	long		(*time_init)(void); /* Optional, may be NULL */
+
+	int		(*set_rtc_time)(struct rtc_time *);
+	void		(*get_rtc_time)(struct rtc_time *);
+	unsigned long	(*get_boot_time)(void);
+	unsigned char 	(*rtc_read_val)(int addr);
+	void		(*rtc_write_val)(int addr, unsigned char val);
+
+	void		(*calibrate_decr)(void);
+
+	void		(*progress)(char *, unsigned short);
+
+	/* Interface for platform error logging */
+	void 		(*log_error)(char *buf, unsigned int err_type, int fatal);
+
+	unsigned char 	(*nvram_read_val)(int addr);
+	void		(*nvram_write_val)(int addr, unsigned char val);
+	ssize_t		(*nvram_write)(char *buf, size_t count, loff_t *index);
+	ssize_t		(*nvram_read)(char *buf, size_t count, loff_t *index);	
+	ssize_t		(*nvram_size)(void);		
+	void		(*nvram_sync)(void);
+
+	/* Exception handlers */
+	int		(*system_reset_exception)(struct pt_regs *regs);
+	int 		(*machine_check_exception)(struct pt_regs *regs);
+
+	/* Motherboard/chipset features. This is a kind of general purpose
+	 * hook used to control some machine specific features (like reset
+	 * lines, chip power control, etc...).
+	 */
+	long	 	(*feature_call)(unsigned int feature, ...);
+
+	/* Get legacy PCI/IDE interrupt mapping */ 
+	int		(*pci_get_legacy_ide_irq)(struct pci_dev *dev, int channel);
+	
+	/* Get access protection for /dev/mem */
+	pgprot_t	(*phys_mem_access_prot)(struct file *file,
+						unsigned long pfn,
+						unsigned long size,
+						pgprot_t vma_prot);
+
+	/* Idle loop for this platform, leave empty for default idle loop */
+	void		(*idle_loop)(void);
+
+	/*
+	 * Function for waiting for work with reduced power in idle loop;
+	 * called with interrupts disabled.
+	 */
+	void		(*power_save)(void);
+
+	/* Function to enable performance monitor counters for this
+	   platform, called once per cpu. */
+	void		(*enable_pmcs)(void);
+
+	/* Set DABR for this platform, leave empty for default implemenation */
+	int		(*set_dabr)(unsigned long dabr);
+
+#ifdef CONFIG_PPC32	/* XXX for now */
+	/* A general init function, called by ppc_init in init/main.c.
+	   May be NULL. */
+	void		(*init)(void);
+
+	void		(*kgdb_map_scc)(void);
+
+	/*
+	 * optional PCI "hooks"
+	 */
+	/* Called in indirect_* to avoid touching devices */
+	int (*pci_exclude_device)(struct pci_controller *, unsigned char, unsigned char);
+
+	/* Called at then very end of pcibios_init() */
+	void (*pcibios_after_init)(void);
+
+#endif /* CONFIG_PPC32 */
+
+	/* Called after PPC generic resource fixup to perform
+	   machine specific fixups */
+	void (*pcibios_fixup_resources)(struct pci_dev *);
+
+	/* Called for each PCI bus in the system when it's probed */
+	void (*pcibios_fixup_bus)(struct pci_bus *);
+
+	/* Called when pci_enable_device() is called. Returns 0 to
+	 * allow assignment/enabling of the device. */
+	int  (*pcibios_enable_device_hook)(struct pci_dev *);
+
+	/* Called to shutdown machine specific hardware not already controlled
+	 * by other drivers.
+	 */
+	void (*machine_shutdown)(void);
+
+#ifdef CONFIG_KEXEC
+	/* Called to do the minimal shutdown needed to run a kexec'd kernel
+	 * to run successfully.
+	 * XXX Should we move this one out of kexec scope?
+	 */
+	void (*machine_crash_shutdown)(struct pt_regs *regs);
+
+	/* Called to do what every setup is needed on image and the
+	 * reboot code buffer. Returns 0 on success.
+	 * Provide your own (maybe dummy) implementation if your platform
+	 * claims to support kexec.
+	 */
+	int (*machine_kexec_prepare)(struct kimage *image);
+
+	/* Called to handle any machine specific cleanup on image */
+	void (*machine_kexec_cleanup)(struct kimage *image);
+
+	/* Called to perform the _real_ kexec.
+	 * Do NOT allocate memory or fail here. We are past the point of
+	 * no return.
+	 */
+	void (*machine_kexec)(struct kimage *image);
+#endif /* CONFIG_KEXEC */
+
+#ifdef CONFIG_SUSPEND
+	/* These are called to disable and enable, respectively, IRQs when
+	 * entering a suspend state.  If NULL, then the generic versions
+	 * will be called.  The generic versions disable/enable the
+	 * decrementer along with interrupts.
+	 */
+	void (*suspend_disable_irqs)(void);
+	void (*suspend_enable_irqs)(void);
+#endif
+};
+
+extern void e500_idle(void);
+extern void power4_idle(void);
+extern void power4_cpu_offline_powersave(void);
+extern void ppc6xx_idle(void);
+
+/*
+ * ppc_md contains a copy of the machine description structure for the
+ * current platform. machine_id contains the initial address where the
+ * description was found during boot.
+ */
+extern struct machdep_calls ppc_md;
+extern struct machdep_calls *machine_id;
+
+#define __machine_desc __attribute__ ((__section__ (".machine.desc")))
+
+#define define_machine(name)					\
+	extern struct machdep_calls mach_##name;		\
+	EXPORT_SYMBOL(mach_##name);				\
+	struct machdep_calls mach_##name __machine_desc =
+
+#define machine_is(name) \
+	({ \
+		extern struct machdep_calls mach_##name \
+			__attribute__((weak));		 \
+		machine_id == &mach_##name; \
+	})
+
+extern void probe_machine(void);
+
+extern char cmd_line[COMMAND_LINE_SIZE];
+
+#ifdef CONFIG_PPC_PMAC
+/*
+ * Power macintoshes have either a CUDA, PMU or SMU controlling
+ * system reset, power, NVRAM, RTC.
+ */
+typedef enum sys_ctrler_kind {
+	SYS_CTRLER_UNKNOWN = 0,
+	SYS_CTRLER_CUDA = 1,
+	SYS_CTRLER_PMU = 2,
+	SYS_CTRLER_SMU = 3,
+} sys_ctrler_t;
+extern sys_ctrler_t sys_ctrler;
+
+#endif /* CONFIG_PPC_PMAC */
+
+extern void setup_pci_ptrs(void);
+
+#ifdef CONFIG_SMP
+/* Poor default implementations */
+extern void __devinit smp_generic_give_timebase(void);
+extern void __devinit smp_generic_take_timebase(void);
+#endif /* CONFIG_SMP */
+
+
+/* Functions to produce codes on the leds.
+ * The SRC code should be unique for the message category and should
+ * be limited to the lower 24 bits (the upper 8 are set by these funcs),
+ * and (for boot & dump) should be sorted numerically in the order
+ * the events occur.
+ */
+/* Print a boot progress message. */
+void ppc64_boot_msg(unsigned int src, const char *msg);
+/* Print a termination message (print only -- does not stop the kernel) */
+void ppc64_terminate_msg(unsigned int src, const char *msg);
+
+static inline void log_error(char *buf, unsigned int err_type, int fatal)
+{
+	if (ppc_md.log_error)
+		ppc_md.log_error(buf, err_type, fatal);
+}
+
+#define __define_machine_initcall(mach,level,fn,id) \
+	static int __init __machine_initcall_##mach##_##fn(void) { \
+		if (machine_is(mach)) return fn(); \
+		return 0; \
+	} \
+	__define_initcall(level,__machine_initcall_##mach##_##fn,id);
+
+#define machine_core_initcall(mach,fn)		__define_machine_initcall(mach,"1",fn,1)
+#define machine_core_initcall_sync(mach,fn)	__define_machine_initcall(mach,"1s",fn,1s)
+#define machine_postcore_initcall(mach,fn)	__define_machine_initcall(mach,"2",fn,2)
+#define machine_postcore_initcall_sync(mach,fn)	__define_machine_initcall(mach,"2s",fn,2s)
+#define machine_arch_initcall(mach,fn)		__define_machine_initcall(mach,"3",fn,3)
+#define machine_arch_initcall_sync(mach,fn)	__define_machine_initcall(mach,"3s",fn,3s)
+#define machine_subsys_initcall(mach,fn)	__define_machine_initcall(mach,"4",fn,4)
+#define machine_subsys_initcall_sync(mach,fn)	__define_machine_initcall(mach,"4s",fn,4s)
+#define machine_fs_initcall(mach,fn)		__define_machine_initcall(mach,"5",fn,5)
+#define machine_fs_initcall_sync(mach,fn)	__define_machine_initcall(mach,"5s",fn,5s)
+#define machine_rootfs_initcall(mach,fn)	__define_machine_initcall(mach,"rootfs",fn,rootfs)
+#define machine_device_initcall(mach,fn)	__define_machine_initcall(mach,"6",fn,6)
+#define machine_device_initcall_sync(mach,fn)	__define_machine_initcall(mach,"6s",fn,6s)
+#define machine_late_initcall(mach,fn)		__define_machine_initcall(mach,"7",fn,7)
+#define machine_late_initcall_sync(mach,fn)	__define_machine_initcall(mach,"7s",fn,7s)
+
+void generic_suspend_disable_irqs(void);
+void generic_suspend_enable_irqs(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_MACHDEP_H */
diff --git a/arch/powerpc/include/asm/macio.h b/arch/powerpc/include/asm/macio.h
new file mode 100644
index 000000000000..079c06eae446
--- /dev/null
+++ b/arch/powerpc/include/asm/macio.h
@@ -0,0 +1,142 @@
+#ifndef __MACIO_ASIC_H__
+#define __MACIO_ASIC_H__
+#ifdef __KERNEL__
+
+#include <linux/of_device.h>
+
+extern struct bus_type macio_bus_type;
+
+/* MacIO device driver is defined later */
+struct macio_driver;
+struct macio_chip;
+
+#define MACIO_DEV_COUNT_RESOURCES	8
+#define MACIO_DEV_COUNT_IRQS		8
+
+/*
+ * the macio_bus structure is used to describe a "virtual" bus
+ * within a MacIO ASIC. It's typically provided by a macio_pci_asic
+ * PCI device, but could be provided differently as well (nubus
+ * machines using a fake OF tree).
+ *
+ * The pdev field can be NULL on non-PCI machines
+ */
+struct macio_bus
+{
+	struct macio_chip	*chip;		/* macio_chip (private use) */
+	int			index;		/* macio chip index in system */
+#ifdef CONFIG_PCI
+	struct pci_dev		*pdev;		/* PCI device hosting this bus */
+#endif
+};
+
+/*
+ * the macio_dev structure is used to describe a device
+ * within an Apple MacIO ASIC.
+ */
+struct macio_dev
+{
+	struct macio_bus	*bus;		/* macio bus this device is on */
+	struct macio_dev	*media_bay;	/* Device is part of a media bay */
+	struct of_device	ofdev;
+	int			n_resources;
+	struct resource		resource[MACIO_DEV_COUNT_RESOURCES];
+	int			n_interrupts;
+	struct resource		interrupt[MACIO_DEV_COUNT_IRQS];
+};
+#define	to_macio_device(d) container_of(d, struct macio_dev, ofdev.dev)
+#define	of_to_macio_device(d) container_of(d, struct macio_dev, ofdev)
+
+extern struct macio_dev *macio_dev_get(struct macio_dev *dev);
+extern void macio_dev_put(struct macio_dev *dev);
+
+/*
+ * Accessors to resources & interrupts and other device
+ * fields
+ */
+
+static inline int macio_resource_count(struct macio_dev *dev)
+{
+	return dev->n_resources;
+}
+
+static inline unsigned long macio_resource_start(struct macio_dev *dev, int resource_no)
+{
+	return dev->resource[resource_no].start;
+}
+
+static inline unsigned long macio_resource_end(struct macio_dev *dev, int resource_no)
+{
+	return dev->resource[resource_no].end;
+}
+
+static inline unsigned long macio_resource_len(struct macio_dev *dev, int resource_no)
+{
+	struct resource *res = &dev->resource[resource_no];
+	if (res->start == 0 || res->end == 0 || res->end < res->start)
+		return 0;
+	return res->end - res->start + 1;
+}
+
+extern int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name);
+extern void macio_release_resource(struct macio_dev *dev, int resource_no);
+extern int macio_request_resources(struct macio_dev *dev, const char *name);
+extern void macio_release_resources(struct macio_dev *dev);
+
+static inline int macio_irq_count(struct macio_dev *dev)
+{
+	return dev->n_interrupts;
+}
+
+static inline int macio_irq(struct macio_dev *dev, int irq_no)
+{
+	return dev->interrupt[irq_no].start;
+}
+
+static inline void macio_set_drvdata(struct macio_dev *dev, void *data)
+{
+	dev_set_drvdata(&dev->ofdev.dev, data);
+}
+
+static inline void* macio_get_drvdata(struct macio_dev *dev)
+{
+	return dev_get_drvdata(&dev->ofdev.dev);
+}
+
+static inline struct device_node *macio_get_of_node(struct macio_dev *mdev)
+{
+	return mdev->ofdev.node;
+}
+
+#ifdef CONFIG_PCI
+static inline struct pci_dev *macio_get_pci_dev(struct macio_dev *mdev)
+{
+	return mdev->bus->pdev;
+}
+#endif
+
+/*
+ * A driver for a mac-io chip based device
+ */
+struct macio_driver
+{
+	char			*name;
+	struct of_device_id	*match_table;
+	struct module		*owner;
+
+	int	(*probe)(struct macio_dev* dev, const struct of_device_id *match);
+	int	(*remove)(struct macio_dev* dev);
+
+	int	(*suspend)(struct macio_dev* dev, pm_message_t state);
+	int	(*resume)(struct macio_dev* dev);
+	int	(*shutdown)(struct macio_dev* dev);
+
+	struct device_driver	driver;
+};
+#define	to_macio_driver(drv) container_of(drv,struct macio_driver, driver)
+
+extern int macio_register_driver(struct macio_driver *);
+extern void macio_unregister_driver(struct macio_driver *);
+
+#endif /* __KERNEL__ */
+#endif /* __MACIO_ASIC_H__ */
diff --git a/arch/powerpc/include/asm/mc146818rtc.h b/arch/powerpc/include/asm/mc146818rtc.h
new file mode 100644
index 000000000000..f2741c8b59a1
--- /dev/null
+++ b/arch/powerpc/include/asm/mc146818rtc.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_POWERPC_MC146818RTC_H
+#define _ASM_POWERPC_MC146818RTC_H
+
+/*
+ * Machine dependent access functions for RTC registers.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __KERNEL__
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_MC146818RTC_H */
diff --git a/arch/powerpc/include/asm/mediabay.h b/arch/powerpc/include/asm/mediabay.h
new file mode 100644
index 000000000000..b2efb3325808
--- /dev/null
+++ b/arch/powerpc/include/asm/mediabay.h
@@ -0,0 +1,43 @@
+/*
+ * mediabay.h: definitions for using the media bay
+ * on PowerBook 3400 and similar computers.
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ */
+#ifndef _PPC_MEDIABAY_H
+#define _PPC_MEDIABAY_H
+
+#ifdef __KERNEL__
+
+#define MB_FD		0	/* media bay contains floppy drive (automatic eject ?) */
+#define MB_FD1		1	/* media bay contains floppy drive (manual eject ?) */
+#define MB_SOUND	2	/* sound device ? */
+#define MB_CD		3	/* media bay contains ATA drive such as CD or ZIP */
+#define MB_PCI		5	/* media bay contains a PCI device */
+#define MB_POWER	6	/* media bay contains a Power device (???) */
+#define MB_NO		7	/* media bay contains nothing */
+
+/* Number of bays in the machine or 0 */
+extern int media_bay_count;
+
+#ifdef CONFIG_BLK_DEV_IDE_PMAC
+#include <linux/ide.h>
+
+int check_media_bay_by_base(unsigned long base, int what);
+/* called by IDE PMAC host driver to register IDE controller for media bay */
+int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base,
+			    int irq, ide_hwif_t *hwif);
+
+int check_media_bay(struct device_node *which_bay, int what);
+
+#else
+
+static inline int check_media_bay(struct device_node *which_bay, int what)
+{
+	return -ENODEV;
+}
+
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _PPC_MEDIABAY_H */
diff --git a/arch/powerpc/include/asm/mman.h b/arch/powerpc/include/asm/mman.h
new file mode 100644
index 000000000000..9209f755763e
--- /dev/null
+++ b/arch/powerpc/include/asm/mman.h
@@ -0,0 +1,63 @@
+#ifndef _ASM_POWERPC_MMAN_H
+#define _ASM_POWERPC_MMAN_H
+
+#include <asm-generic/mman.h>
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define PROT_SAO	0x10		/* Strong Access Ordering */
+
+#define MAP_RENAME      MAP_ANONYMOUS   /* In SunOS terminology */
+#define MAP_NORESERVE   0x40            /* don't reserve swap pages */
+#define MAP_LOCKED	0x80
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+
+#define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
+#define MCL_FUTURE      0x4000          /* lock all additions to address space */
+
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#ifdef __KERNEL__
+#ifdef CONFIG_PPC64
+
+#include <asm/cputable.h>
+#include <linux/mm.h>
+
+/*
+ * This file is included by linux/mman.h, so we can't use cacl_vm_prot_bits()
+ * here.  How important is the optimization?
+ */
+static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot)
+{
+	return (prot & PROT_SAO) ? VM_SAO : 0;
+}
+#define arch_calc_vm_prot_bits(prot) arch_calc_vm_prot_bits(prot)
+
+static inline pgprot_t arch_vm_get_page_prot(unsigned long vm_flags)
+{
+	return (vm_flags & VM_SAO) ? __pgprot(_PAGE_SAO) : 0;
+}
+#define arch_vm_get_page_prot(vm_flags) arch_vm_get_page_prot(vm_flags)
+
+static inline int arch_validate_prot(unsigned long prot)
+{
+	if (prot & ~(PROT_READ | PROT_WRITE | PROT_EXEC | PROT_SEM | PROT_SAO))
+		return 0;
+	if ((prot & PROT_SAO) && !cpu_has_feature(CPU_FTR_SAO))
+		return 0;
+	return 1;
+}
+#define arch_validate_prot(prot) arch_validate_prot(prot)
+
+#endif /* CONFIG_PPC64 */
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_MMAN_H */
diff --git a/arch/powerpc/include/asm/mmu-40x.h b/arch/powerpc/include/asm/mmu-40x.h
new file mode 100644
index 000000000000..3d108676584c
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-40x.h
@@ -0,0 +1,63 @@
+#ifndef _ASM_POWERPC_MMU_40X_H_
+#define _ASM_POWERPC_MMU_40X_H_
+
+/*
+ * PPC40x support
+ */
+
+#define PPC40X_TLB_SIZE 64
+
+/*
+ * TLB entries are defined by a "high" tag portion and a "low" data
+ * portion.  On all architectures, the data portion is 32-bits.
+ *
+ * TLB entries are managed entirely under software control by reading,
+ * writing, and searchoing using the 4xx-specific tlbre, tlbwr, and tlbsx
+ * instructions.
+ */
+
+#define	TLB_LO          1
+#define	TLB_HI          0
+
+#define	TLB_DATA        TLB_LO
+#define	TLB_TAG         TLB_HI
+
+/* Tag portion */
+
+#define TLB_EPN_MASK    0xFFFFFC00      /* Effective Page Number */
+#define TLB_PAGESZ_MASK 0x00000380
+#define TLB_PAGESZ(x)   (((x) & 0x7) << 7)
+#define   PAGESZ_1K		0
+#define   PAGESZ_4K             1
+#define   PAGESZ_16K            2
+#define   PAGESZ_64K            3
+#define   PAGESZ_256K           4
+#define   PAGESZ_1M             5
+#define   PAGESZ_4M             6
+#define   PAGESZ_16M            7
+#define TLB_VALID       0x00000040      /* Entry is valid */
+
+/* Data portion */
+
+#define TLB_RPN_MASK    0xFFFFFC00      /* Real Page Number */
+#define TLB_PERM_MASK   0x00000300
+#define TLB_EX          0x00000200      /* Instruction execution allowed */
+#define TLB_WR          0x00000100      /* Writes permitted */
+#define TLB_ZSEL_MASK   0x000000F0
+#define TLB_ZSEL(x)     (((x) & 0xF) << 4)
+#define TLB_ATTR_MASK   0x0000000F
+#define TLB_W           0x00000008      /* Caching is write-through */
+#define TLB_I           0x00000004      /* Caching is inhibited */
+#define TLB_M           0x00000002      /* Memory is coherent */
+#define TLB_G           0x00000001      /* Memory is guarded from prefetch */
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long id;
+	unsigned long vdso_base;
+} mm_context_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MMU_40X_H_ */
diff --git a/arch/powerpc/include/asm/mmu-44x.h b/arch/powerpc/include/asm/mmu-44x.h
new file mode 100644
index 000000000000..a825524c981a
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-44x.h
@@ -0,0 +1,76 @@
+#ifndef _ASM_POWERPC_MMU_44X_H_
+#define _ASM_POWERPC_MMU_44X_H_
+/*
+ * PPC440 support
+ */
+
+#define PPC44x_MMUCR_TID	0x000000ff
+#define PPC44x_MMUCR_STS	0x00010000
+
+#define	PPC44x_TLB_PAGEID	0
+#define	PPC44x_TLB_XLAT		1
+#define	PPC44x_TLB_ATTRIB	2
+
+/* Page identification fields */
+#define PPC44x_TLB_EPN_MASK	0xfffffc00      /* Effective Page Number */
+#define	PPC44x_TLB_VALID	0x00000200      /* Valid flag */
+#define PPC44x_TLB_TS		0x00000100	/* Translation address space */
+#define PPC44x_TLB_1K		0x00000000	/* Page sizes */
+#define PPC44x_TLB_4K		0x00000010
+#define PPC44x_TLB_16K		0x00000020
+#define PPC44x_TLB_64K		0x00000030
+#define PPC44x_TLB_256K		0x00000040
+#define PPC44x_TLB_1M		0x00000050
+#define PPC44x_TLB_16M		0x00000070
+#define	PPC44x_TLB_256M		0x00000090
+
+/* Translation fields */
+#define PPC44x_TLB_RPN_MASK	0xfffffc00      /* Real Page Number */
+#define	PPC44x_TLB_ERPN_MASK	0x0000000f
+
+/* Storage attribute and access control fields */
+#define PPC44x_TLB_ATTR_MASK	0x0000ff80
+#define PPC44x_TLB_U0		0x00008000      /* User 0 */
+#define PPC44x_TLB_U1		0x00004000      /* User 1 */
+#define PPC44x_TLB_U2		0x00002000      /* User 2 */
+#define PPC44x_TLB_U3		0x00001000      /* User 3 */
+#define PPC44x_TLB_W		0x00000800      /* Caching is write-through */
+#define PPC44x_TLB_I		0x00000400      /* Caching is inhibited */
+#define PPC44x_TLB_M		0x00000200      /* Memory is coherent */
+#define PPC44x_TLB_G		0x00000100      /* Memory is guarded */
+#define PPC44x_TLB_E		0x00000080      /* Memory is guarded */
+
+#define PPC44x_TLB_PERM_MASK	0x0000003f
+#define PPC44x_TLB_UX		0x00000020      /* User execution */
+#define PPC44x_TLB_UW		0x00000010      /* User write */
+#define PPC44x_TLB_UR		0x00000008      /* User read */
+#define PPC44x_TLB_SX		0x00000004      /* Super execution */
+#define PPC44x_TLB_SW		0x00000002      /* Super write */
+#define PPC44x_TLB_SR		0x00000001      /* Super read */
+
+/* Number of TLB entries */
+#define PPC44x_TLB_SIZE		64
+
+#ifndef __ASSEMBLY__
+
+extern unsigned int tlb_44x_hwater;
+
+typedef struct {
+	unsigned long id;
+	unsigned long vdso_base;
+} mm_context_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#ifndef CONFIG_PPC_EARLY_DEBUG_44x
+#define PPC44x_EARLY_TLBS	1
+#else
+#define PPC44x_EARLY_TLBS	2
+#define PPC44x_EARLY_DEBUG_VIRTADDR	(ASM_CONST(0xf0000000) \
+	| (ASM_CONST(CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW) & 0xffff))
+#endif
+
+/* Size of the TLBs used for pinning in lowmem */
+#define PPC_PIN_SIZE	(1 << 28)	/* 256M */
+
+#endif /* _ASM_POWERPC_MMU_44X_H_ */
diff --git a/arch/powerpc/include/asm/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h
new file mode 100644
index 000000000000..9db877eb88db
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-8xx.h
@@ -0,0 +1,145 @@
+#ifndef _ASM_POWERPC_MMU_8XX_H_
+#define _ASM_POWERPC_MMU_8XX_H_
+/*
+ * PPC8xx support
+ */
+
+/* Control/status registers for the MPC8xx.
+ * A write operation to these registers causes serialized access.
+ * During software tablewalk, the registers used perform mask/shift-add
+ * operations when written/read.  A TLB entry is created when the Mx_RPN
+ * is written, and the contents of several registers are used to
+ * create the entry.
+ */
+#define SPRN_MI_CTR	784	/* Instruction TLB control register */
+#define MI_GPM		0x80000000	/* Set domain manager mode */
+#define MI_PPM		0x40000000	/* Set subpage protection */
+#define MI_CIDEF	0x20000000	/* Set cache inhibit when MMU dis */
+#define MI_RSV4I	0x08000000	/* Reserve 4 TLB entries */
+#define MI_PPCS		0x02000000	/* Use MI_RPN prob/priv state */
+#define MI_IDXMASK	0x00001f00	/* TLB index to be loaded */
+#define MI_RESETVAL	0x00000000	/* Value of register at reset */
+
+/* These are the Ks and Kp from the PowerPC books.  For proper operation,
+ * Ks = 0, Kp = 1.
+ */
+#define SPRN_MI_AP	786
+#define MI_Ks		0x80000000	/* Should not be set */
+#define MI_Kp		0x40000000	/* Should always be set */
+
+/* The effective page number register.  When read, contains the information
+ * about the last instruction TLB miss.  When MI_RPN is written, bits in
+ * this register are used to create the TLB entry.
+ */
+#define SPRN_MI_EPN	787
+#define MI_EPNMASK	0xfffff000	/* Effective page number for entry */
+#define MI_EVALID	0x00000200	/* Entry is valid */
+#define MI_ASIDMASK	0x0000000f	/* ASID match value */
+					/* Reset value is undefined */
+
+/* A "level 1" or "segment" or whatever you want to call it register.
+ * For the instruction TLB, it contains bits that get loaded into the
+ * TLB entry when the MI_RPN is written.
+ */
+#define SPRN_MI_TWC	789
+#define MI_APG		0x000001e0	/* Access protection group (0) */
+#define MI_GUARDED	0x00000010	/* Guarded storage */
+#define MI_PSMASK	0x0000000c	/* Mask of page size bits */
+#define MI_PS8MEG	0x0000000c	/* 8M page size */
+#define MI_PS512K	0x00000004	/* 512K page size */
+#define MI_PS4K_16K	0x00000000	/* 4K or 16K page size */
+#define MI_SVALID	0x00000001	/* Segment entry is valid */
+					/* Reset value is undefined */
+
+/* Real page number.  Defined by the pte.  Writing this register
+ * causes a TLB entry to be created for the instruction TLB, using
+ * additional information from the MI_EPN, and MI_TWC registers.
+ */
+#define SPRN_MI_RPN	790
+
+/* Define an RPN value for mapping kernel memory to large virtual
+ * pages for boot initialization.  This has real page number of 0,
+ * large page size, shared page, cache enabled, and valid.
+ * Also mark all subpages valid and write access.
+ */
+#define MI_BOOTINIT	0x000001fd
+
+#define SPRN_MD_CTR	792	/* Data TLB control register */
+#define MD_GPM		0x80000000	/* Set domain manager mode */
+#define MD_PPM		0x40000000	/* Set subpage protection */
+#define MD_CIDEF	0x20000000	/* Set cache inhibit when MMU dis */
+#define MD_WTDEF	0x10000000	/* Set writethrough when MMU dis */
+#define MD_RSV4I	0x08000000	/* Reserve 4 TLB entries */
+#define MD_TWAM		0x04000000	/* Use 4K page hardware assist */
+#define MD_PPCS		0x02000000	/* Use MI_RPN prob/priv state */
+#define MD_IDXMASK	0x00001f00	/* TLB index to be loaded */
+#define MD_RESETVAL	0x04000000	/* Value of register at reset */
+
+#define SPRN_M_CASID	793	/* Address space ID (context) to match */
+#define MC_ASIDMASK	0x0000000f	/* Bits used for ASID value */
+
+
+/* These are the Ks and Kp from the PowerPC books.  For proper operation,
+ * Ks = 0, Kp = 1.
+ */
+#define SPRN_MD_AP	794
+#define MD_Ks		0x80000000	/* Should not be set */
+#define MD_Kp		0x40000000	/* Should always be set */
+
+/* The effective page number register.  When read, contains the information
+ * about the last instruction TLB miss.  When MD_RPN is written, bits in
+ * this register are used to create the TLB entry.
+ */
+#define SPRN_MD_EPN	795
+#define MD_EPNMASK	0xfffff000	/* Effective page number for entry */
+#define MD_EVALID	0x00000200	/* Entry is valid */
+#define MD_ASIDMASK	0x0000000f	/* ASID match value */
+					/* Reset value is undefined */
+
+/* The pointer to the base address of the first level page table.
+ * During a software tablewalk, reading this register provides the address
+ * of the entry associated with MD_EPN.
+ */
+#define SPRN_M_TWB	796
+#define	M_L1TB		0xfffff000	/* Level 1 table base address */
+#define M_L1INDX	0x00000ffc	/* Level 1 index, when read */
+					/* Reset value is undefined */
+
+/* A "level 1" or "segment" or whatever you want to call it register.
+ * For the data TLB, it contains bits that get loaded into the TLB entry
+ * when the MD_RPN is written.  It is also provides the hardware assist
+ * for finding the PTE address during software tablewalk.
+ */
+#define SPRN_MD_TWC	797
+#define MD_L2TB		0xfffff000	/* Level 2 table base address */
+#define MD_L2INDX	0xfffffe00	/* Level 2 index (*pte), when read */
+#define MD_APG		0x000001e0	/* Access protection group (0) */
+#define MD_GUARDED	0x00000010	/* Guarded storage */
+#define MD_PSMASK	0x0000000c	/* Mask of page size bits */
+#define MD_PS8MEG	0x0000000c	/* 8M page size */
+#define MD_PS512K	0x00000004	/* 512K page size */
+#define MD_PS4K_16K	0x00000000	/* 4K or 16K page size */
+#define MD_WT		0x00000002	/* Use writethrough page attribute */
+#define MD_SVALID	0x00000001	/* Segment entry is valid */
+					/* Reset value is undefined */
+
+
+/* Real page number.  Defined by the pte.  Writing this register
+ * causes a TLB entry to be created for the data TLB, using
+ * additional information from the MD_EPN, and MD_TWC registers.
+ */
+#define SPRN_MD_RPN	798
+
+/* This is a temporary storage register that could be used to save
+ * a processor working register during a tablewalk.
+ */
+#define SPRN_M_TW	799
+
+#ifndef __ASSEMBLY__
+typedef struct {
+	unsigned long id;
+	unsigned long vdso_base;
+} mm_context_t;
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MMU_8XX_H_ */
diff --git a/arch/powerpc/include/asm/mmu-fsl-booke.h b/arch/powerpc/include/asm/mmu-fsl-booke.h
new file mode 100644
index 000000000000..925d93cf64d8
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-fsl-booke.h
@@ -0,0 +1,82 @@
+#ifndef _ASM_POWERPC_MMU_FSL_BOOKE_H_
+#define _ASM_POWERPC_MMU_FSL_BOOKE_H_
+/*
+ * Freescale Book-E MMU support
+ */
+
+/* Book-E defined page sizes */
+#define BOOKE_PAGESZ_1K		0
+#define BOOKE_PAGESZ_4K		1
+#define BOOKE_PAGESZ_16K	2
+#define BOOKE_PAGESZ_64K	3
+#define BOOKE_PAGESZ_256K	4
+#define BOOKE_PAGESZ_1M		5
+#define BOOKE_PAGESZ_4M		6
+#define BOOKE_PAGESZ_16M	7
+#define BOOKE_PAGESZ_64M	8
+#define BOOKE_PAGESZ_256M	9
+#define BOOKE_PAGESZ_1GB	10
+#define BOOKE_PAGESZ_4GB	11
+#define BOOKE_PAGESZ_16GB	12
+#define BOOKE_PAGESZ_64GB	13
+#define BOOKE_PAGESZ_256GB	14
+#define BOOKE_PAGESZ_1TB	15
+
+#define MAS0_TLBSEL(x)	((x << 28) & 0x30000000)
+#define MAS0_ESEL(x)	((x << 16) & 0x0FFF0000)
+#define MAS0_NV(x)	((x) & 0x00000FFF)
+
+#define MAS1_VALID 	0x80000000
+#define MAS1_IPROT	0x40000000
+#define MAS1_TID(x)	((x << 16) & 0x3FFF0000)
+#define MAS1_TS		0x00001000
+#define MAS1_TSIZE(x)	((x << 8) & 0x00000F00)
+
+#define MAS2_EPN	0xFFFFF000
+#define MAS2_X0		0x00000040
+#define MAS2_X1		0x00000020
+#define MAS2_W		0x00000010
+#define MAS2_I		0x00000008
+#define MAS2_M		0x00000004
+#define MAS2_G		0x00000002
+#define MAS2_E		0x00000001
+
+#define MAS3_RPN	0xFFFFF000
+#define MAS3_U0		0x00000200
+#define MAS3_U1		0x00000100
+#define MAS3_U2		0x00000080
+#define MAS3_U3		0x00000040
+#define MAS3_UX		0x00000020
+#define MAS3_SX		0x00000010
+#define MAS3_UW		0x00000008
+#define MAS3_SW		0x00000004
+#define MAS3_UR		0x00000002
+#define MAS3_SR		0x00000001
+
+#define MAS4_TLBSELD(x) MAS0_TLBSEL(x)
+#define MAS4_TIDDSEL	0x000F0000
+#define MAS4_TSIZED(x)	MAS1_TSIZE(x)
+#define MAS4_X0D	0x00000040
+#define MAS4_X1D	0x00000020
+#define MAS4_WD		0x00000010
+#define MAS4_ID		0x00000008
+#define MAS4_MD		0x00000004
+#define MAS4_GD		0x00000002
+#define MAS4_ED		0x00000001
+
+#define MAS6_SPID0	0x3FFF0000
+#define MAS6_SPID1	0x00007FFE
+#define MAS6_SAS	0x00000001
+#define MAS6_SPID	MAS6_SPID0
+
+#define MAS7_RPN	0xFFFFFFFF
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long id;
+	unsigned long vdso_base;
+} mm_context_t;
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MMU_FSL_BOOKE_H_ */
diff --git a/arch/powerpc/include/asm/mmu-hash32.h b/arch/powerpc/include/asm/mmu-hash32.h
new file mode 100644
index 000000000000..16b1a1e77e64
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-hash32.h
@@ -0,0 +1,83 @@
+#ifndef _ASM_POWERPC_MMU_HASH32_H_
+#define _ASM_POWERPC_MMU_HASH32_H_
+/*
+ * 32-bit hash table MMU support
+ */
+
+/*
+ * BATs
+ */
+
+/* Block size masks */
+#define BL_128K	0x000
+#define BL_256K 0x001
+#define BL_512K 0x003
+#define BL_1M   0x007
+#define BL_2M   0x00F
+#define BL_4M   0x01F
+#define BL_8M   0x03F
+#define BL_16M  0x07F
+#define BL_32M  0x0FF
+#define BL_64M  0x1FF
+#define BL_128M 0x3FF
+#define BL_256M 0x7FF
+
+/* BAT Access Protection */
+#define BPP_XX	0x00		/* No access */
+#define BPP_RX	0x01		/* Read only */
+#define BPP_RW	0x02		/* Read/write */
+
+#ifndef __ASSEMBLY__
+/* Contort a phys_addr_t into the right format/bits for a BAT */
+#ifdef CONFIG_PHYS_64BIT
+#define BAT_PHYS_ADDR(x) ((u32)((x & 0x00000000fffe0000ULL) | \
+				((x & 0x0000000e00000000ULL) >> 24) | \
+				((x & 0x0000000100000000ULL) >> 30)))
+#else
+#define BAT_PHYS_ADDR(x) (x)
+#endif
+
+struct ppc_bat {
+	u32 batu;
+	u32 batl;
+};
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Hash table
+ */
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+#define PP_RWXX	0	/* Supervisor read/write, User none */
+#define PP_RWRX 1	/* Supervisor read/write, User read */
+#define PP_RWRW 2	/* Supervisor read/write, User read/write */
+#define PP_RXRX 3	/* Supervisor read,       User read */
+
+#ifndef __ASSEMBLY__
+
+/* Hardware Page Table Entry */
+struct hash_pte {
+	unsigned long v:1;	/* Entry is valid */
+	unsigned long vsid:24;	/* Virtual segment identifier */
+	unsigned long h:1;	/* Hash algorithm indicator */
+	unsigned long api:6;	/* Abbreviated page index */
+	unsigned long rpn:20;	/* Real (physical) page number */
+	unsigned long    :3;	/* Unused */
+	unsigned long r:1;	/* Referenced */
+	unsigned long c:1;	/* Changed */
+	unsigned long w:1;	/* Write-thru cache mode */
+	unsigned long i:1;	/* Cache inhibited */
+	unsigned long m:1;	/* Memory coherence */
+	unsigned long g:1;	/* Guarded */
+	unsigned long  :1;	/* Unused */
+	unsigned long pp:2;	/* Page protection */
+};
+
+typedef struct {
+	unsigned long id;
+	unsigned long vdso_base;
+} mm_context_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MMU_HASH32_H_ */
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
new file mode 100644
index 000000000000..19c7a9403490
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -0,0 +1,478 @@
+#ifndef _ASM_POWERPC_MMU_HASH64_H_
+#define _ASM_POWERPC_MMU_HASH64_H_
+/*
+ * PowerPC64 memory management structures
+ *
+ * Dave Engebretsen & Mike Corrigan <{engebret|mikejc}@us.ibm.com>
+ *   PPC64 rework.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/asm-compat.h>
+#include <asm/page.h>
+
+/*
+ * Segment table
+ */
+
+#define STE_ESID_V	0x80
+#define STE_ESID_KS	0x20
+#define STE_ESID_KP	0x10
+#define STE_ESID_N	0x08
+
+#define STE_VSID_SHIFT	12
+
+/* Location of cpu0's segment table */
+#define STAB0_PAGE	0x6
+#define STAB0_OFFSET	(STAB0_PAGE << 12)
+#define STAB0_PHYS_ADDR	(STAB0_OFFSET + PHYSICAL_START)
+
+#ifndef __ASSEMBLY__
+extern char initial_stab[];
+#endif /* ! __ASSEMBLY */
+
+/*
+ * SLB
+ */
+
+#define SLB_NUM_BOLTED		3
+#define SLB_CACHE_ENTRIES	8
+
+/* Bits in the SLB ESID word */
+#define SLB_ESID_V		ASM_CONST(0x0000000008000000) /* valid */
+
+/* Bits in the SLB VSID word */
+#define SLB_VSID_SHIFT		12
+#define SLB_VSID_SHIFT_1T	24
+#define SLB_VSID_SSIZE_SHIFT	62
+#define SLB_VSID_B		ASM_CONST(0xc000000000000000)
+#define SLB_VSID_B_256M		ASM_CONST(0x0000000000000000)
+#define SLB_VSID_B_1T		ASM_CONST(0x4000000000000000)
+#define SLB_VSID_KS		ASM_CONST(0x0000000000000800)
+#define SLB_VSID_KP		ASM_CONST(0x0000000000000400)
+#define SLB_VSID_N		ASM_CONST(0x0000000000000200) /* no-execute */
+#define SLB_VSID_L		ASM_CONST(0x0000000000000100)
+#define SLB_VSID_C		ASM_CONST(0x0000000000000080) /* class */
+#define SLB_VSID_LP		ASM_CONST(0x0000000000000030)
+#define SLB_VSID_LP_00		ASM_CONST(0x0000000000000000)
+#define SLB_VSID_LP_01		ASM_CONST(0x0000000000000010)
+#define SLB_VSID_LP_10		ASM_CONST(0x0000000000000020)
+#define SLB_VSID_LP_11		ASM_CONST(0x0000000000000030)
+#define SLB_VSID_LLP		(SLB_VSID_L|SLB_VSID_LP)
+
+#define SLB_VSID_KERNEL		(SLB_VSID_KP)
+#define SLB_VSID_USER		(SLB_VSID_KP|SLB_VSID_KS|SLB_VSID_C)
+
+#define SLBIE_C			(0x08000000)
+#define SLBIE_SSIZE_SHIFT	25
+
+/*
+ * Hash table
+ */
+
+#define HPTES_PER_GROUP 8
+
+#define HPTE_V_SSIZE_SHIFT	62
+#define HPTE_V_AVPN_SHIFT	7
+#define HPTE_V_AVPN		ASM_CONST(0x3fffffffffffff80)
+#define HPTE_V_AVPN_VAL(x)	(((x) & HPTE_V_AVPN) >> HPTE_V_AVPN_SHIFT)
+#define HPTE_V_COMPARE(x,y)	(!(((x) ^ (y)) & 0xffffffffffffff80UL))
+#define HPTE_V_BOLTED		ASM_CONST(0x0000000000000010)
+#define HPTE_V_LOCK		ASM_CONST(0x0000000000000008)
+#define HPTE_V_LARGE		ASM_CONST(0x0000000000000004)
+#define HPTE_V_SECONDARY	ASM_CONST(0x0000000000000002)
+#define HPTE_V_VALID		ASM_CONST(0x0000000000000001)
+
+#define HPTE_R_PP0		ASM_CONST(0x8000000000000000)
+#define HPTE_R_TS		ASM_CONST(0x4000000000000000)
+#define HPTE_R_RPN_SHIFT	12
+#define HPTE_R_RPN		ASM_CONST(0x3ffffffffffff000)
+#define HPTE_R_FLAGS		ASM_CONST(0x00000000000003ff)
+#define HPTE_R_PP		ASM_CONST(0x0000000000000003)
+#define HPTE_R_N		ASM_CONST(0x0000000000000004)
+#define HPTE_R_C		ASM_CONST(0x0000000000000080)
+#define HPTE_R_R		ASM_CONST(0x0000000000000100)
+
+#define HPTE_V_1TB_SEG		ASM_CONST(0x4000000000000000)
+#define HPTE_V_VRMA_MASK	ASM_CONST(0x4001ffffff000000)
+
+/* Values for PP (assumes Ks=0, Kp=1) */
+/* pp0 will always be 0 for linux     */
+#define PP_RWXX	0	/* Supervisor read/write, User none */
+#define PP_RWRX 1	/* Supervisor read/write, User read */
+#define PP_RWRW 2	/* Supervisor read/write, User read/write */
+#define PP_RXRX 3	/* Supervisor read,       User read */
+
+#ifndef __ASSEMBLY__
+
+struct hash_pte {
+	unsigned long v;
+	unsigned long r;
+};
+
+extern struct hash_pte *htab_address;
+extern unsigned long htab_size_bytes;
+extern unsigned long htab_hash_mask;
+
+/*
+ * Page size definition
+ *
+ *    shift : is the "PAGE_SHIFT" value for that page size
+ *    sllp  : is a bit mask with the value of SLB L || LP to be or'ed
+ *            directly to a slbmte "vsid" value
+ *    penc  : is the HPTE encoding mask for the "LP" field:
+ *
+ */
+struct mmu_psize_def
+{
+	unsigned int	shift;	/* number of bits */
+	unsigned int	penc;	/* HPTE encoding */
+	unsigned int	tlbiel;	/* tlbiel supported for that page size */
+	unsigned long	avpnm;	/* bits to mask out in AVPN in the HPTE */
+	unsigned long	sllp;	/* SLB L||LP (exact mask to use in slbmte) */
+};
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The kernel use the constants below to index in the page sizes array.
+ * The use of fixed constants for this purpose is better for performances
+ * of the low level hash refill handlers.
+ *
+ * A non supported page size has a "shift" field set to 0
+ *
+ * Any new page size being implemented can get a new entry in here. Whether
+ * the kernel will use it or not is a different matter though. The actual page
+ * size used by hugetlbfs is not defined here and may be made variable
+ */
+
+#define MMU_PAGE_4K		0	/* 4K */
+#define MMU_PAGE_64K		1	/* 64K */
+#define MMU_PAGE_64K_AP		2	/* 64K Admixed (in a 4K segment) */
+#define MMU_PAGE_1M		3	/* 1M */
+#define MMU_PAGE_16M		4	/* 16M */
+#define MMU_PAGE_16G		5	/* 16G */
+#define MMU_PAGE_COUNT		6
+
+/*
+ * Segment sizes.
+ * These are the values used by hardware in the B field of
+ * SLB entries and the first dword of MMU hashtable entries.
+ * The B field is 2 bits; the values 2 and 3 are unused and reserved.
+ */
+#define MMU_SEGSIZE_256M	0
+#define MMU_SEGSIZE_1T		1
+
+
+#ifndef __ASSEMBLY__
+
+/*
+ * The current system page and segment sizes
+ */
+extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
+extern int mmu_linear_psize;
+extern int mmu_virtual_psize;
+extern int mmu_vmalloc_psize;
+extern int mmu_vmemmap_psize;
+extern int mmu_io_psize;
+extern int mmu_kernel_ssize;
+extern int mmu_highuser_ssize;
+extern u16 mmu_slb_size;
+extern unsigned long tce_alloc_start, tce_alloc_end;
+
+/*
+ * If the processor supports 64k normal pages but not 64k cache
+ * inhibited pages, we have to be prepared to switch processes
+ * to use 4k pages when they create cache-inhibited mappings.
+ * If this is the case, mmu_ci_restrictions will be set to 1.
+ */
+extern int mmu_ci_restrictions;
+
+#ifdef CONFIG_HUGETLB_PAGE
+/*
+ * The page size indexes of the huge pages for use by hugetlbfs
+ */
+extern unsigned int mmu_huge_psizes[MMU_PAGE_COUNT];
+
+#endif /* CONFIG_HUGETLB_PAGE */
+
+/*
+ * This function sets the AVPN and L fields of the HPTE  appropriately
+ * for the page size
+ */
+static inline unsigned long hpte_encode_v(unsigned long va, int psize,
+					  int ssize)
+{
+	unsigned long v;
+	v = (va >> 23) & ~(mmu_psize_defs[psize].avpnm);
+	v <<= HPTE_V_AVPN_SHIFT;
+	if (psize != MMU_PAGE_4K)
+		v |= HPTE_V_LARGE;
+	v |= ((unsigned long) ssize) << HPTE_V_SSIZE_SHIFT;
+	return v;
+}
+
+/*
+ * This function sets the ARPN, and LP fields of the HPTE appropriately
+ * for the page size. We assume the pa is already "clean" that is properly
+ * aligned for the requested page size
+ */
+static inline unsigned long hpte_encode_r(unsigned long pa, int psize)
+{
+	unsigned long r;
+
+	/* A 4K page needs no special encoding */
+	if (psize == MMU_PAGE_4K)
+		return pa & HPTE_R_RPN;
+	else {
+		unsigned int penc = mmu_psize_defs[psize].penc;
+		unsigned int shift = mmu_psize_defs[psize].shift;
+		return (pa & ~((1ul << shift) - 1)) | (penc << 12);
+	}
+	return r;
+}
+
+/*
+ * Build a VA given VSID, EA and segment size
+ */
+static inline unsigned long hpt_va(unsigned long ea, unsigned long vsid,
+				   int ssize)
+{
+	if (ssize == MMU_SEGSIZE_256M)
+		return (vsid << 28) | (ea & 0xfffffffUL);
+	return (vsid << 40) | (ea & 0xffffffffffUL);
+}
+
+/*
+ * This hashes a virtual address
+ */
+
+static inline unsigned long hpt_hash(unsigned long va, unsigned int shift,
+				     int ssize)
+{
+	unsigned long hash, vsid;
+
+	if (ssize == MMU_SEGSIZE_256M) {
+		hash = (va >> 28) ^ ((va & 0x0fffffffUL) >> shift);
+	} else {
+		vsid = va >> 40;
+		hash = vsid ^ (vsid << 25) ^ ((va & 0xffffffffffUL) >> shift);
+	}
+	return hash & 0x7fffffffffUL;
+}
+
+extern int __hash_page_4K(unsigned long ea, unsigned long access,
+			  unsigned long vsid, pte_t *ptep, unsigned long trap,
+			  unsigned int local, int ssize, int subpage_prot);
+extern int __hash_page_64K(unsigned long ea, unsigned long access,
+			   unsigned long vsid, pte_t *ptep, unsigned long trap,
+			   unsigned int local, int ssize);
+struct mm_struct;
+extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap);
+extern int hash_huge_page(struct mm_struct *mm, unsigned long access,
+			  unsigned long ea, unsigned long vsid, int local,
+			  unsigned long trap);
+
+extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
+			     unsigned long pstart, unsigned long mode,
+			     int psize, int ssize);
+extern void set_huge_psize(int psize);
+extern void add_gpage(unsigned long addr, unsigned long page_size,
+			  unsigned long number_of_pages);
+extern void demote_segment_4k(struct mm_struct *mm, unsigned long addr);
+
+extern void htab_initialize(void);
+extern void htab_initialize_secondary(void);
+extern void hpte_init_native(void);
+extern void hpte_init_lpar(void);
+extern void hpte_init_iSeries(void);
+extern void hpte_init_beat(void);
+extern void hpte_init_beat_v3(void);
+
+extern void stabs_alloc(void);
+extern void slb_initialize(void);
+extern void slb_flush_and_rebolt(void);
+extern void stab_initialize(unsigned long stab);
+
+extern void slb_vmalloc_update(void);
+#endif /* __ASSEMBLY__ */
+
+/*
+ * VSID allocation
+ *
+ * We first generate a 36-bit "proto-VSID".  For kernel addresses this
+ * is equal to the ESID, for user addresses it is:
+ *	(context << 15) | (esid & 0x7fff)
+ *
+ * The two forms are distinguishable because the top bit is 0 for user
+ * addresses, whereas the top two bits are 1 for kernel addresses.
+ * Proto-VSIDs with the top two bits equal to 0b10 are reserved for
+ * now.
+ *
+ * The proto-VSIDs are then scrambled into real VSIDs with the
+ * multiplicative hash:
+ *
+ *	VSID = (proto-VSID * VSID_MULTIPLIER) % VSID_MODULUS
+ *	where	VSID_MULTIPLIER = 268435399 = 0xFFFFFC7
+ *		VSID_MODULUS = 2^36-1 = 0xFFFFFFFFF
+ *
+ * This scramble is only well defined for proto-VSIDs below
+ * 0xFFFFFFFFF, so both proto-VSID and actual VSID 0xFFFFFFFFF are
+ * reserved.  VSID_MULTIPLIER is prime, so in particular it is
+ * co-prime to VSID_MODULUS, making this a 1:1 scrambling function.
+ * Because the modulus is 2^n-1 we can compute it efficiently without
+ * a divide or extra multiply (see below).
+ *
+ * This scheme has several advantages over older methods:
+ *
+ * 	- We have VSIDs allocated for every kernel address
+ * (i.e. everything above 0xC000000000000000), except the very top
+ * segment, which simplifies several things.
+ *
+ * 	- We allow for 15 significant bits of ESID and 20 bits of
+ * context for user addresses.  i.e. 8T (43 bits) of address space for
+ * up to 1M contexts (although the page table structure and context
+ * allocation will need changes to take advantage of this).
+ *
+ * 	- The scramble function gives robust scattering in the hash
+ * table (at least based on some initial results).  The previous
+ * method was more susceptible to pathological cases giving excessive
+ * hash collisions.
+ */
+/*
+ * WARNING - If you change these you must make sure the asm
+ * implementations in slb_allocate (slb_low.S), do_stab_bolted
+ * (head.S) and ASM_VSID_SCRAMBLE (below) are changed accordingly.
+ *
+ * You'll also need to change the precomputed VSID values in head.S
+ * which are used by the iSeries firmware.
+ */
+
+#define VSID_MULTIPLIER_256M	ASM_CONST(200730139)	/* 28-bit prime */
+#define VSID_BITS_256M		36
+#define VSID_MODULUS_256M	((1UL<<VSID_BITS_256M)-1)
+
+#define VSID_MULTIPLIER_1T	ASM_CONST(12538073)	/* 24-bit prime */
+#define VSID_BITS_1T		24
+#define VSID_MODULUS_1T		((1UL<<VSID_BITS_1T)-1)
+
+#define CONTEXT_BITS		19
+#define USER_ESID_BITS		16
+#define USER_ESID_BITS_1T	4
+
+#define USER_VSID_RANGE	(1UL << (USER_ESID_BITS + SID_SHIFT))
+
+/*
+ * This macro generates asm code to compute the VSID scramble
+ * function.  Used in slb_allocate() and do_stab_bolted.  The function
+ * computed is: (protovsid*VSID_MULTIPLIER) % VSID_MODULUS
+ *
+ *	rt = register continaing the proto-VSID and into which the
+ *		VSID will be stored
+ *	rx = scratch register (clobbered)
+ *
+ * 	- rt and rx must be different registers
+ * 	- The answer will end up in the low VSID_BITS bits of rt.  The higher
+ * 	  bits may contain other garbage, so you may need to mask the
+ * 	  result.
+ */
+#define ASM_VSID_SCRAMBLE(rt, rx, size)					\
+	lis	rx,VSID_MULTIPLIER_##size@h;				\
+	ori	rx,rx,VSID_MULTIPLIER_##size@l;				\
+	mulld	rt,rt,rx;		/* rt = rt * MULTIPLIER */	\
+									\
+	srdi	rx,rt,VSID_BITS_##size;					\
+	clrldi	rt,rt,(64-VSID_BITS_##size);				\
+	add	rt,rt,rx;		/* add high and low bits */	\
+	/* Now, r3 == VSID (mod 2^36-1), and lies between 0 and		\
+	 * 2^36-1+2^28-1.  That in particular means that if r3 >=	\
+	 * 2^36-1, then r3+1 has the 2^36 bit set.  So, if r3+1 has	\
+	 * the bit clear, r3 already has the answer we want, if it	\
+	 * doesn't, the answer is the low 36 bits of r3+1.  So in all	\
+	 * cases the answer is the low 36 bits of (r3 + ((r3+1) >> 36))*/\
+	addi	rx,rt,1;						\
+	srdi	rx,rx,VSID_BITS_##size;	/* extract 2^VSID_BITS bit */	\
+	add	rt,rt,rx
+
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long mm_context_id_t;
+
+typedef struct {
+	mm_context_id_t id;
+	u16 user_psize;		/* page size index */
+
+#ifdef CONFIG_PPC_MM_SLICES
+	u64 low_slices_psize;	/* SLB page size encodings */
+	u64 high_slices_psize;  /* 4 bits per slice for now */
+#else
+	u16 sllp;		/* SLB page size encoding */
+#endif
+	unsigned long vdso_base;
+} mm_context_t;
+
+
+#if 0
+/*
+ * The code below is equivalent to this function for arguments
+ * < 2^VSID_BITS, which is all this should ever be called
+ * with.  However gcc is not clever enough to compute the
+ * modulus (2^n-1) without a second multiply.
+ */
+#define vsid_scrample(protovsid, size) \
+	((((protovsid) * VSID_MULTIPLIER_##size) % VSID_MODULUS_##size))
+
+#else /* 1 */
+#define vsid_scramble(protovsid, size) \
+	({								 \
+		unsigned long x;					 \
+		x = (protovsid) * VSID_MULTIPLIER_##size;		 \
+		x = (x >> VSID_BITS_##size) + (x & VSID_MODULUS_##size); \
+		(x + ((x+1) >> VSID_BITS_##size)) & VSID_MODULUS_##size; \
+	})
+#endif /* 1 */
+
+/* This is only valid for addresses >= KERNELBASE */
+static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
+{
+	if (ssize == MMU_SEGSIZE_256M)
+		return vsid_scramble(ea >> SID_SHIFT, 256M);
+	return vsid_scramble(ea >> SID_SHIFT_1T, 1T);
+}
+
+/* Returns the segment size indicator for a user address */
+static inline int user_segment_size(unsigned long addr)
+{
+	/* Use 1T segments if possible for addresses >= 1T */
+	if (addr >= (1UL << SID_SHIFT_1T))
+		return mmu_highuser_ssize;
+	return MMU_SEGSIZE_256M;
+}
+
+/* This is only valid for user addresses (which are below 2^44) */
+static inline unsigned long get_vsid(unsigned long context, unsigned long ea,
+				     int ssize)
+{
+	if (ssize == MMU_SEGSIZE_256M)
+		return vsid_scramble((context << USER_ESID_BITS)
+				     | (ea >> SID_SHIFT), 256M);
+	return vsid_scramble((context << USER_ESID_BITS_1T)
+			     | (ea >> SID_SHIFT_1T), 1T);
+}
+
+/*
+ * This is only used on legacy iSeries in lparmap.c,
+ * hence the 256MB segment assumption.
+ */
+#define VSID_SCRAMBLE(pvsid)	(((pvsid) * VSID_MULTIPLIER_256M) %	\
+				 VSID_MODULUS_256M)
+#define KERNEL_VSID(ea)		VSID_SCRAMBLE(GET_ESID(ea))
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_MMU_HASH64_H_ */
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
new file mode 100644
index 000000000000..4c0e1b4f975c
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_POWERPC_MMU_H_
+#define _ASM_POWERPC_MMU_H_
+#ifdef __KERNEL__
+
+#ifdef CONFIG_PPC64
+/* 64-bit classic hash table MMU */
+#  include <asm/mmu-hash64.h>
+#elif defined(CONFIG_PPC_STD_MMU)
+/* 32-bit classic hash table MMU */
+#  include <asm/mmu-hash32.h>
+#elif defined(CONFIG_40x)
+/* 40x-style software loaded TLB */
+#  include <asm/mmu-40x.h>
+#elif defined(CONFIG_44x)
+/* 44x-style software loaded TLB */
+#  include <asm/mmu-44x.h>
+#elif defined(CONFIG_FSL_BOOKE)
+/* Freescale Book-E software loaded TLB */
+#  include <asm/mmu-fsl-booke.h>
+#elif defined (CONFIG_PPC_8xx)
+/* Motorola/Freescale 8xx software loaded TLB */
+#  include <asm/mmu-8xx.h>
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_MMU_H_ */
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
new file mode 100644
index 000000000000..9102b8bf0ead
--- /dev/null
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -0,0 +1,280 @@
+#ifndef __ASM_POWERPC_MMU_CONTEXT_H
+#define __ASM_POWERPC_MMU_CONTEXT_H
+#ifdef __KERNEL__
+
+#include <asm/mmu.h>	
+#include <asm/cputable.h>
+#include <asm-generic/mm_hooks.h>
+
+#ifndef CONFIG_PPC64
+#include <asm/atomic.h>
+#include <linux/bitops.h>
+
+/*
+ * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
+ * (virtual segment identifiers) for each context.  Although the
+ * hardware supports 24-bit VSIDs, and thus >1 million contexts,
+ * we only use 32,768 of them.  That is ample, since there can be
+ * at most around 30,000 tasks in the system anyway, and it means
+ * that we can use a bitmap to indicate which contexts are in use.
+ * Using a bitmap means that we entirely avoid all of the problems
+ * that we used to have when the context number overflowed,
+ * particularly on SMP systems.
+ *  -- paulus.
+ */
+
+/*
+ * This function defines the mapping from contexts to VSIDs (virtual
+ * segment IDs).  We use a skew on both the context and the high 4 bits
+ * of the 32-bit virtual address (the "effective segment ID") in order
+ * to spread out the entries in the MMU hash table.  Note, if this
+ * function is changed then arch/ppc/mm/hashtable.S will have to be
+ * changed to correspond.
+ */
+#define CTX_TO_VSID(ctx, va)	(((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
+				 & 0xffffff)
+
+/*
+   The MPC8xx has only 16 contexts.  We rotate through them on each
+   task switch.  A better way would be to keep track of tasks that
+   own contexts, and implement an LRU usage.  That way very active
+   tasks don't always have to pay the TLB reload overhead.  The
+   kernel pages are mapped shared, so the kernel can run on behalf
+   of any task that makes a kernel entry.  Shared does not mean they
+   are not protected, just that the ASID comparison is not performed.
+        -- Dan
+
+   The IBM4xx has 256 contexts, so we can just rotate through these
+   as a way of "switching" contexts.  If the TID of the TLB is zero,
+   the PID/TID comparison is disabled, so we can use a TID of zero
+   to represent all kernel pages as shared among all contexts.
+   	-- Dan
+ */
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+#ifdef CONFIG_8xx
+#define NO_CONTEXT      	16
+#define LAST_CONTEXT    	15
+#define FIRST_CONTEXT    	0
+
+#elif defined(CONFIG_4xx)
+#define NO_CONTEXT      	256
+#define LAST_CONTEXT    	255
+#define FIRST_CONTEXT    	1
+
+#elif defined(CONFIG_E200) || defined(CONFIG_E500)
+#define NO_CONTEXT      	256
+#define LAST_CONTEXT    	255
+#define FIRST_CONTEXT    	1
+
+#else
+
+/* PPC 6xx, 7xx CPUs */
+#define NO_CONTEXT      	((unsigned long) -1)
+#define LAST_CONTEXT    	32767
+#define FIRST_CONTEXT    	1
+#endif
+
+/*
+ * Set the current MMU context.
+ * On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by
+ * loading up the segment registers for the user part of the address space.
+ *
+ * Since the PGD is immediately available, it is much faster to simply
+ * pass this along as a second parameter, which is required for 8xx and
+ * can be used for debugging on all processors (if you happen to have
+ * an Abatron).
+ */
+extern void set_context(unsigned long contextid, pgd_t *pgd);
+
+/*
+ * Bitmap of contexts in use.
+ * The size of this bitmap is LAST_CONTEXT + 1 bits.
+ */
+extern unsigned long context_map[];
+
+/*
+ * This caches the next context number that we expect to be free.
+ * Its use is an optimization only, we can't rely on this context
+ * number to be free, but it usually will be.
+ */
+extern unsigned long next_mmu_context;
+
+/*
+ * If we don't have sufficient contexts to give one to every task
+ * that could be in the system, we need to be able to steal contexts.
+ * These variables support that.
+ */
+#if LAST_CONTEXT < 30000
+#define FEW_CONTEXTS	1
+extern atomic_t nr_free_contexts;
+extern struct mm_struct *context_mm[LAST_CONTEXT+1];
+extern void steal_context(void);
+#endif
+
+/*
+ * Get a new mmu context for the address space described by `mm'.
+ */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+	unsigned long ctx;
+
+	if (mm->context.id != NO_CONTEXT)
+		return;
+#ifdef FEW_CONTEXTS
+	while (atomic_dec_if_positive(&nr_free_contexts) < 0)
+		steal_context();
+#endif
+	ctx = next_mmu_context;
+	while (test_and_set_bit(ctx, context_map)) {
+		ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
+		if (ctx > LAST_CONTEXT)
+			ctx = 0;
+	}
+	next_mmu_context = (ctx + 1) & LAST_CONTEXT;
+	mm->context.id = ctx;
+#ifdef FEW_CONTEXTS
+	context_mm[ctx] = mm;
+#endif
+}
+
+/*
+ * Set up the context for a new address space.
+ */
+static inline int init_new_context(struct task_struct *t, struct mm_struct *mm)
+{
+	mm->context.id = NO_CONTEXT;
+	mm->context.vdso_base = 0;
+	return 0;
+}
+
+/*
+ * We're finished using the context for an address space.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	preempt_disable();
+	if (mm->context.id != NO_CONTEXT) {
+		clear_bit(mm->context.id, context_map);
+		mm->context.id = NO_CONTEXT;
+#ifdef FEW_CONTEXTS
+		atomic_inc(&nr_free_contexts);
+#endif
+	}
+	preempt_enable();
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+#ifdef CONFIG_ALTIVEC
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+	asm volatile ("dssall;\n"
+#ifndef CONFIG_POWER4
+	 "sync;\n" /* G4 needs a sync here, G5 apparently not */
+#endif
+	 : : );
+#endif /* CONFIG_ALTIVEC */
+
+	tsk->thread.pgdir = next->pgd;
+
+	/* No need to flush userspace segments if the mm doesnt change */
+	if (prev == next)
+		return;
+
+	/* Setup new userspace context */
+	get_mmu_context(next);
+	set_context(next->context.id, next->pgd);
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+#define activate_mm(active_mm, mm)   switch_mm(active_mm, mm, current)
+
+extern void mmu_context_init(void);
+
+
+#else
+
+#include <linux/kernel.h>	
+#include <linux/mm.h>	
+#include <linux/sched.h>
+
+/*
+ * Copyright (C) 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+static inline void enter_lazy_tlb(struct mm_struct *mm,
+				  struct task_struct *tsk)
+{
+}
+
+/*
+ * The proto-VSID space has 2^35 - 1 segments available for user mappings.
+ * Each segment contains 2^28 bytes.  Each context maps 2^44 bytes,
+ * so we can support 2^19-1 contexts (19 == 35 + 28 - 44).
+ */
+#define NO_CONTEXT	0
+#define MAX_CONTEXT	((1UL << 19) - 1)
+
+extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+extern void destroy_context(struct mm_struct *mm);
+
+extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm);
+extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
+
+/*
+ * switch_mm is the entry point called from the architecture independent
+ * code in kernel/sched.c
+ */
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	if (!cpu_isset(smp_processor_id(), next->cpu_vm_mask))
+		cpu_set(smp_processor_id(), next->cpu_vm_mask);
+
+	/* No need to flush userspace segments if the mm doesnt change */
+	if (prev == next)
+		return;
+
+#ifdef CONFIG_ALTIVEC
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		asm volatile ("dssall");
+#endif /* CONFIG_ALTIVEC */
+
+	if (cpu_has_feature(CPU_FTR_SLB))
+		switch_slb(tsk, next);
+	else
+		switch_stab(tsk, next);
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	switch_mm(prev, next, current);
+	local_irq_restore(flags);
+}
+
+#endif /* CONFIG_PPC64 */
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_MMU_CONTEXT_H */
diff --git a/arch/powerpc/include/asm/mmzone.h b/arch/powerpc/include/asm/mmzone.h
new file mode 100644
index 000000000000..19f299b7e256
--- /dev/null
+++ b/arch/powerpc/include/asm/mmzone.h
@@ -0,0 +1,47 @@
+/*
+ * Written by Kanoj Sarcar (kanoj@sgi.com) Aug 99
+ *
+ * PowerPC64 port:
+ * Copyright (C) 2002 Anton Blanchard, IBM Corp.
+ */
+#ifndef _ASM_MMZONE_H_
+#define _ASM_MMZONE_H_
+#ifdef __KERNEL__
+
+
+/*
+ * generic non-linear memory support:
+ *
+ * 1) we will not split memory into more chunks than will fit into the
+ *    flags field of the struct page
+ */
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+
+extern struct pglist_data *node_data[];
+/*
+ * Return a pointer to the node data for node n.
+ */
+#define NODE_DATA(nid)		(node_data[nid])
+
+/*
+ * Following are specific to this numa platform.
+ */
+
+extern int numa_cpu_lookup_table[];
+extern cpumask_t numa_cpumask_lookup_table[];
+#ifdef CONFIG_MEMORY_HOTPLUG
+extern unsigned long max_pfn;
+#endif
+
+/*
+ * Following are macros that each numa implmentation must define.
+ */
+
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)	(NODE_DATA(nid)->node_end_pfn)
+
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_MMZONE_H_ */
diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h
new file mode 100644
index 000000000000..e5f14b13ccf0
--- /dev/null
+++ b/arch/powerpc/include/asm/module.h
@@ -0,0 +1,77 @@
+#ifndef _ASM_POWERPC_MODULE_H
+#define _ASM_POWERPC_MODULE_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/list.h>
+#include <asm/bug.h>
+
+
+#ifndef __powerpc64__
+/*
+ * Thanks to Paul M for explaining this.
+ *
+ * PPC can only do rel jumps += 32MB, and often the kernel and other
+ * modules are furthur away than this.  So, we jump to a table of
+ * trampolines attached to the module (the Procedure Linkage Table)
+ * whenever that happens.
+ */
+
+struct ppc_plt_entry {
+	/* 16 byte jump instruction sequence (4 instructions) */
+	unsigned int jump[4];
+};
+#endif	/* __powerpc64__ */
+
+
+struct mod_arch_specific {
+#ifdef __powerpc64__
+	unsigned int stubs_section;	/* Index of stubs section in module */
+	unsigned int toc_section;	/* What section is the TOC? */
+#else
+	/* Indices of PLT sections within module. */
+	unsigned int core_plt_section;
+	unsigned int init_plt_section;
+#endif
+
+	/* List of BUG addresses, source line numbers and filenames */
+	struct list_head bug_list;
+	struct bug_entry *bug_table;
+	unsigned int num_bugs;
+};
+
+/*
+ * Select ELF headers.
+ * Make empty section for module_frob_arch_sections to expand.
+ */
+
+#ifdef __powerpc64__
+#    define Elf_Shdr	Elf64_Shdr
+#    define Elf_Sym	Elf64_Sym
+#    define Elf_Ehdr	Elf64_Ehdr
+#    ifdef MODULE
+	asm(".section .stubs,\"ax\",@nobits; .align 3; .previous");
+#    endif
+#else
+#    define Elf_Shdr	Elf32_Shdr
+#    define Elf_Sym	Elf32_Sym
+#    define Elf_Ehdr	Elf32_Ehdr
+#    ifdef MODULE
+	asm(".section .plt,\"ax\",@nobits; .align 3; .previous");
+	asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous");
+#    endif	/* MODULE */
+#endif
+
+
+struct exception_table_entry;
+void sort_ex_table(struct exception_table_entry *start,
+		   struct exception_table_entry *finish);
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_MODULE_H */
diff --git a/arch/powerpc/include/asm/mpc512x.h b/arch/powerpc/include/asm/mpc512x.h
new file mode 100644
index 000000000000..c48a1658eeac
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc512x.h
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>, Friday Apr 13 2007
+ *
+ * Description:
+ * MPC5121 Prototypes and definitions
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_POWERPC_MPC512x_H__
+#define __ASM_POWERPC_MPC512x_H__
+
+extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
+
+#endif /* __ASM_POWERPC_MPC512x_H__ */
+
diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h
new file mode 100644
index 000000000000..81ef10b6b672
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc52xx.h
@@ -0,0 +1,295 @@
+/*
+ * Prototypes, etc. for the Freescale MPC52xx embedded cpu chips
+ * May need to be cleaned as the port goes on ...
+ *
+ * Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_POWERPC_MPC52xx_H__
+#define __ASM_POWERPC_MPC52xx_H__
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+#include <asm/prom.h>
+#endif /* __ASSEMBLY__ */
+
+#include <linux/suspend.h>
+
+/* Variants of the 5200(B) */
+#define MPC5200_SVR		0x80110010
+#define MPC5200_SVR_MASK	0xfffffff0
+#define MPC5200B_SVR		0x80110020
+#define MPC5200B_SVR_MASK	0xfffffff0
+
+/* ======================================================================== */
+/* Structures mapping of some unit register set                             */
+/* ======================================================================== */
+
+#ifndef __ASSEMBLY__
+
+/* Memory Mapping Control */
+struct mpc52xx_mmap_ctl {
+	u32 mbar;		/* MMAP_CTRL + 0x00 */
+
+	u32 cs0_start;		/* MMAP_CTRL + 0x04 */
+	u32 cs0_stop;		/* MMAP_CTRL + 0x08 */
+	u32 cs1_start;		/* MMAP_CTRL + 0x0c */
+	u32 cs1_stop;		/* MMAP_CTRL + 0x10 */
+	u32 cs2_start;		/* MMAP_CTRL + 0x14 */
+	u32 cs2_stop;		/* MMAP_CTRL + 0x18 */
+	u32 cs3_start;		/* MMAP_CTRL + 0x1c */
+	u32 cs3_stop;		/* MMAP_CTRL + 0x20 */
+	u32 cs4_start;		/* MMAP_CTRL + 0x24 */
+	u32 cs4_stop;		/* MMAP_CTRL + 0x28 */
+	u32 cs5_start;		/* MMAP_CTRL + 0x2c */
+	u32 cs5_stop;		/* MMAP_CTRL + 0x30 */
+
+	u32 sdram0;		/* MMAP_CTRL + 0x34 */
+	u32 sdram1;		/* MMAP_CTRL + 0X38 */
+
+	u32 reserved[4];	/* MMAP_CTRL + 0x3c .. 0x48 */
+
+	u32 boot_start;		/* MMAP_CTRL + 0x4c */
+	u32 boot_stop;		/* MMAP_CTRL + 0x50 */
+
+	u32 ipbi_ws_ctrl;	/* MMAP_CTRL + 0x54 */
+
+	u32 cs6_start;		/* MMAP_CTRL + 0x58 */
+	u32 cs6_stop;		/* MMAP_CTRL + 0x5c */
+	u32 cs7_start;		/* MMAP_CTRL + 0x60 */
+	u32 cs7_stop;		/* MMAP_CTRL + 0x64 */
+};
+
+/* SDRAM control */
+struct mpc52xx_sdram {
+	u32 mode;		/* SDRAM + 0x00 */
+	u32 ctrl;		/* SDRAM + 0x04 */
+	u32 config1;		/* SDRAM + 0x08 */
+	u32 config2;		/* SDRAM + 0x0c */
+};
+
+/* SDMA */
+struct mpc52xx_sdma {
+	u32 taskBar;		/* SDMA + 0x00 */
+	u32 currentPointer;	/* SDMA + 0x04 */
+	u32 endPointer;		/* SDMA + 0x08 */
+	u32 variablePointer;	/* SDMA + 0x0c */
+
+	u8 IntVect1;		/* SDMA + 0x10 */
+	u8 IntVect2;		/* SDMA + 0x11 */
+	u16 PtdCntrl;		/* SDMA + 0x12 */
+
+	u32 IntPend;		/* SDMA + 0x14 */
+	u32 IntMask;		/* SDMA + 0x18 */
+
+	u16 tcr[16];		/* SDMA + 0x1c .. 0x3a */
+
+	u8 ipr[32];		/* SDMA + 0x3c .. 0x5b */
+
+	u32 cReqSelect;		/* SDMA + 0x5c */
+	u32 task_size0;		/* SDMA + 0x60 */
+	u32 task_size1;		/* SDMA + 0x64 */
+	u32 MDEDebug;		/* SDMA + 0x68 */
+	u32 ADSDebug;		/* SDMA + 0x6c */
+	u32 Value1;		/* SDMA + 0x70 */
+	u32 Value2;		/* SDMA + 0x74 */
+	u32 Control;		/* SDMA + 0x78 */
+	u32 Status;		/* SDMA + 0x7c */
+	u32 PTDDebug;		/* SDMA + 0x80 */
+};
+
+/* GPT */
+struct mpc52xx_gpt {
+	u32 mode;		/* GPTx + 0x00 */
+	u32 count;		/* GPTx + 0x04 */
+	u32 pwm;		/* GPTx + 0x08 */
+	u32 status;		/* GPTx + 0X0c */
+};
+
+/* GPIO */
+struct mpc52xx_gpio {
+	u32 port_config;	/* GPIO + 0x00 */
+	u32 simple_gpioe;	/* GPIO + 0x04 */
+	u32 simple_ode;		/* GPIO + 0x08 */
+	u32 simple_ddr;		/* GPIO + 0x0c */
+	u32 simple_dvo;		/* GPIO + 0x10 */
+	u32 simple_ival;	/* GPIO + 0x14 */
+	u8 outo_gpioe;		/* GPIO + 0x18 */
+	u8 reserved1[3];	/* GPIO + 0x19 */
+	u8 outo_dvo;		/* GPIO + 0x1c */
+	u8 reserved2[3];	/* GPIO + 0x1d */
+	u8 sint_gpioe;		/* GPIO + 0x20 */
+	u8 reserved3[3];	/* GPIO + 0x21 */
+	u8 sint_ode;		/* GPIO + 0x24 */
+	u8 reserved4[3];	/* GPIO + 0x25 */
+	u8 sint_ddr;		/* GPIO + 0x28 */
+	u8 reserved5[3];	/* GPIO + 0x29 */
+	u8 sint_dvo;		/* GPIO + 0x2c */
+	u8 reserved6[3];	/* GPIO + 0x2d */
+	u8 sint_inten;		/* GPIO + 0x30 */
+	u8 reserved7[3];	/* GPIO + 0x31 */
+	u16 sint_itype;		/* GPIO + 0x34 */
+	u16 reserved8;		/* GPIO + 0x36 */
+	u8 gpio_control;	/* GPIO + 0x38 */
+	u8 reserved9[3];	/* GPIO + 0x39 */
+	u8 sint_istat;		/* GPIO + 0x3c */
+	u8 sint_ival;		/* GPIO + 0x3d */
+	u8 bus_errs;		/* GPIO + 0x3e */
+	u8 reserved10;		/* GPIO + 0x3f */
+};
+
+#define MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD	4
+#define MPC52xx_GPIO_PSC_CONFIG_UART_WITH_CD	5
+#define MPC52xx_GPIO_PCI_DIS			(1<<15)
+
+/* GPIO with WakeUp*/
+struct mpc52xx_gpio_wkup {
+	u8 wkup_gpioe;		/* GPIO_WKUP + 0x00 */
+	u8 reserved1[3];	/* GPIO_WKUP + 0x03 */
+	u8 wkup_ode;		/* GPIO_WKUP + 0x04 */
+	u8 reserved2[3];	/* GPIO_WKUP + 0x05 */
+	u8 wkup_ddr;		/* GPIO_WKUP + 0x08 */
+	u8 reserved3[3];	/* GPIO_WKUP + 0x09 */
+	u8 wkup_dvo;		/* GPIO_WKUP + 0x0C */
+	u8 reserved4[3];	/* GPIO_WKUP + 0x0D */
+	u8 wkup_inten;		/* GPIO_WKUP + 0x10 */
+	u8 reserved5[3];	/* GPIO_WKUP + 0x11 */
+	u8 wkup_iinten;		/* GPIO_WKUP + 0x14 */
+	u8 reserved6[3];	/* GPIO_WKUP + 0x15 */
+	u16 wkup_itype;		/* GPIO_WKUP + 0x18 */
+	u8 reserved7[2];	/* GPIO_WKUP + 0x1A */
+	u8 wkup_maste;		/* GPIO_WKUP + 0x1C */
+	u8 reserved8[3];	/* GPIO_WKUP + 0x1D */
+	u8 wkup_ival;		/* GPIO_WKUP + 0x20 */
+	u8 reserved9[3];	/* GPIO_WKUP + 0x21 */
+	u8 wkup_istat;		/* GPIO_WKUP + 0x24 */
+	u8 reserved10[3];	/* GPIO_WKUP + 0x25 */
+};
+
+/* XLB Bus control */
+struct mpc52xx_xlb {
+	u8 reserved[0x40];
+	u32 config;		/* XLB + 0x40 */
+	u32 version;		/* XLB + 0x44 */
+	u32 status;		/* XLB + 0x48 */
+	u32 int_enable;		/* XLB + 0x4c */
+	u32 addr_capture;	/* XLB + 0x50 */
+	u32 bus_sig_capture;	/* XLB + 0x54 */
+	u32 addr_timeout;	/* XLB + 0x58 */
+	u32 data_timeout;	/* XLB + 0x5c */
+	u32 bus_act_timeout;	/* XLB + 0x60 */
+	u32 master_pri_enable;	/* XLB + 0x64 */
+	u32 master_priority;	/* XLB + 0x68 */
+	u32 base_address;	/* XLB + 0x6c */
+	u32 snoop_window;	/* XLB + 0x70 */
+};
+
+#define MPC52xx_XLB_CFG_PLDIS		(1 << 31)
+#define MPC52xx_XLB_CFG_SNOOP		(1 << 15)
+
+/* Clock Distribution control */
+struct mpc52xx_cdm {
+	u32 jtag_id;		/* CDM + 0x00  reg0 read only */
+	u32 rstcfg;		/* CDM + 0x04  reg1 read only */
+	u32 breadcrumb;		/* CDM + 0x08  reg2 */
+
+	u8 mem_clk_sel;		/* CDM + 0x0c  reg3 byte0 */
+	u8 xlb_clk_sel;		/* CDM + 0x0d  reg3 byte1 read only */
+	u8 ipb_clk_sel;		/* CDM + 0x0e  reg3 byte2 */
+	u8 pci_clk_sel;		/* CDM + 0x0f  reg3 byte3 */
+
+	u8 ext_48mhz_en;	/* CDM + 0x10  reg4 byte0 */
+	u8 fd_enable;		/* CDM + 0x11  reg4 byte1 */
+	u16 fd_counters;	/* CDM + 0x12  reg4 byte2,3 */
+
+	u32 clk_enables;	/* CDM + 0x14  reg5 */
+
+	u8 osc_disable;		/* CDM + 0x18  reg6 byte0 */
+	u8 reserved0[3];	/* CDM + 0x19  reg6 byte1,2,3 */
+
+	u8 ccs_sleep_enable;	/* CDM + 0x1c  reg7 byte0 */
+	u8 osc_sleep_enable;	/* CDM + 0x1d  reg7 byte1 */
+	u8 reserved1;		/* CDM + 0x1e  reg7 byte2 */
+	u8 ccs_qreq_test;	/* CDM + 0x1f  reg7 byte3 */
+
+	u8 soft_reset;		/* CDM + 0x20  u8 byte0 */
+	u8 no_ckstp;		/* CDM + 0x21  u8 byte0 */
+	u8 reserved2[2];	/* CDM + 0x22  u8 byte1,2,3 */
+
+	u8 pll_lock;		/* CDM + 0x24  reg9 byte0 */
+	u8 pll_looselock;	/* CDM + 0x25  reg9 byte1 */
+	u8 pll_sm_lockwin;	/* CDM + 0x26  reg9 byte2 */
+	u8 reserved3;		/* CDM + 0x27  reg9 byte3 */
+
+	u16 reserved4;		/* CDM + 0x28  reg10 byte0,1 */
+	u16 mclken_div_psc1;	/* CDM + 0x2a  reg10 byte2,3 */
+
+	u16 reserved5;		/* CDM + 0x2c  reg11 byte0,1 */
+	u16 mclken_div_psc2;	/* CDM + 0x2e  reg11 byte2,3 */
+
+	u16 reserved6;		/* CDM + 0x30  reg12 byte0,1 */
+	u16 mclken_div_psc3;	/* CDM + 0x32  reg12 byte2,3 */
+
+	u16 reserved7;		/* CDM + 0x34  reg13 byte0,1 */
+	u16 mclken_div_psc6;	/* CDM + 0x36  reg13 byte2,3 */
+};
+
+#endif /* __ASSEMBLY__ */
+
+
+/* ========================================================================= */
+/* Prototypes for MPC52xx sysdev                                             */
+/* ========================================================================= */
+
+#ifndef __ASSEMBLY__
+
+/* mpc52xx_common.c */
+extern unsigned int mpc52xx_find_ipb_freq(struct device_node *node);
+extern void mpc5200_setup_xlb_arbiter(void);
+extern void mpc52xx_declare_of_platform_devices(void);
+extern void mpc52xx_map_common_devices(void);
+extern int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv);
+extern void mpc52xx_restart(char *cmd);
+
+/* mpc52xx_pic.c */
+extern void mpc52xx_init_irq(void);
+extern unsigned int mpc52xx_get_irq(void);
+
+/* mpc52xx_pci.c */
+#ifdef CONFIG_PCI
+extern int __init mpc52xx_add_bridge(struct device_node *node);
+extern void __init mpc52xx_setup_pci(void);
+#else
+static inline void mpc52xx_setup_pci(void) { }
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_PM
+struct mpc52xx_suspend {
+	void (*board_suspend_prepare)(void __iomem *mbar);
+	void (*board_resume_finish)(void __iomem *mbar);
+};
+
+extern struct mpc52xx_suspend mpc52xx_suspend;
+extern int __init mpc52xx_pm_init(void);
+extern int mpc52xx_set_wakeup_gpio(u8 pin, u8 level);
+
+#ifdef CONFIG_PPC_LITE5200
+extern int __init lite5200_pm_init(void);
+
+/* lite5200 calls mpc5200 suspend functions, so here they are */
+extern int mpc52xx_pm_prepare(void);
+extern int mpc52xx_pm_enter(suspend_state_t);
+extern void mpc52xx_pm_finish(void);
+extern char saved_sram[0x4000]; /* reuse buffer from mpc52xx suspend */
+#endif
+#endif /* CONFIG_PM */
+
+#endif /* __ASM_POWERPC_MPC52xx_H__ */
+
diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h
new file mode 100644
index 000000000000..8917ed630565
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc52xx_psc.h
@@ -0,0 +1,276 @@
+/*
+ * include/asm-ppc/mpc52xx_psc.h
+ *
+ * Definitions of consts/structs to drive the Freescale MPC52xx OnChip
+ * PSCs. Theses are shared between multiple drivers since a PSC can be
+ * UART, AC97, IR, I2S, ... So this header is in asm-ppc.
+ *
+ *
+ * Maintainer : Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Based/Extracted from some header of the 2.4 originally written by
+ * Dale Farnsworth <dfarnsworth@mvista.com>
+ *
+ * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
+ * Copyright (C) 2003 MontaVista, Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_MPC52xx_PSC_H__
+#define __ASM_MPC52xx_PSC_H__
+
+#include <asm/types.h>
+
+/* Max number of PSCs */
+#define MPC52xx_PSC_MAXNUM	6
+
+/* Programmable Serial Controller (PSC) status register bits */
+#define MPC52xx_PSC_SR_CDE	0x0080
+#define MPC52xx_PSC_SR_RXRDY	0x0100
+#define MPC52xx_PSC_SR_RXFULL	0x0200
+#define MPC52xx_PSC_SR_TXRDY	0x0400
+#define MPC52xx_PSC_SR_TXEMP	0x0800
+#define MPC52xx_PSC_SR_OE	0x1000
+#define MPC52xx_PSC_SR_PE	0x2000
+#define MPC52xx_PSC_SR_FE	0x4000
+#define MPC52xx_PSC_SR_RB	0x8000
+
+/* PSC Command values */
+#define MPC52xx_PSC_RX_ENABLE		0x0001
+#define MPC52xx_PSC_RX_DISABLE		0x0002
+#define MPC52xx_PSC_TX_ENABLE		0x0004
+#define MPC52xx_PSC_TX_DISABLE		0x0008
+#define MPC52xx_PSC_SEL_MODE_REG_1	0x0010
+#define MPC52xx_PSC_RST_RX		0x0020
+#define MPC52xx_PSC_RST_TX		0x0030
+#define MPC52xx_PSC_RST_ERR_STAT	0x0040
+#define MPC52xx_PSC_RST_BRK_CHG_INT	0x0050
+#define MPC52xx_PSC_START_BRK		0x0060
+#define MPC52xx_PSC_STOP_BRK		0x0070
+
+/* PSC TxRx FIFO status bits */
+#define MPC52xx_PSC_RXTX_FIFO_ERR	0x0040
+#define MPC52xx_PSC_RXTX_FIFO_UF	0x0020
+#define MPC52xx_PSC_RXTX_FIFO_OF	0x0010
+#define MPC52xx_PSC_RXTX_FIFO_FR	0x0008
+#define MPC52xx_PSC_RXTX_FIFO_FULL	0x0004
+#define MPC52xx_PSC_RXTX_FIFO_ALARM	0x0002
+#define MPC52xx_PSC_RXTX_FIFO_EMPTY	0x0001
+
+/* PSC interrupt status/mask bits */
+#define MPC52xx_PSC_IMR_TXRDY		0x0100
+#define MPC52xx_PSC_IMR_RXRDY		0x0200
+#define MPC52xx_PSC_IMR_DB		0x0400
+#define MPC52xx_PSC_IMR_TXEMP		0x0800
+#define MPC52xx_PSC_IMR_ORERR		0x1000
+#define MPC52xx_PSC_IMR_IPC		0x8000
+
+/* PSC input port change bit */
+#define MPC52xx_PSC_CTS			0x01
+#define MPC52xx_PSC_DCD			0x02
+#define MPC52xx_PSC_D_CTS		0x10
+#define MPC52xx_PSC_D_DCD		0x20
+
+/* PSC mode fields */
+#define MPC52xx_PSC_MODE_5_BITS			0x00
+#define MPC52xx_PSC_MODE_6_BITS			0x01
+#define MPC52xx_PSC_MODE_7_BITS			0x02
+#define MPC52xx_PSC_MODE_8_BITS			0x03
+#define MPC52xx_PSC_MODE_BITS_MASK		0x03
+#define MPC52xx_PSC_MODE_PAREVEN		0x00
+#define MPC52xx_PSC_MODE_PARODD			0x04
+#define MPC52xx_PSC_MODE_PARFORCE		0x08
+#define MPC52xx_PSC_MODE_PARNONE		0x10
+#define MPC52xx_PSC_MODE_ERR			0x20
+#define MPC52xx_PSC_MODE_FFULL			0x40
+#define MPC52xx_PSC_MODE_RXRTS			0x80
+
+#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS	0x00
+#define MPC52xx_PSC_MODE_ONE_STOP		0x07
+#define MPC52xx_PSC_MODE_TWO_STOP		0x0f
+
+#define MPC52xx_PSC_RFNUM_MASK	0x01ff
+
+#define MPC52xx_PSC_SICR_DTS1			(1 << 29)
+#define MPC52xx_PSC_SICR_SHDR			(1 << 28)
+#define MPC52xx_PSC_SICR_SIM_MASK		(0xf << 24)
+#define MPC52xx_PSC_SICR_SIM_UART		(0x0 << 24)
+#define MPC52xx_PSC_SICR_SIM_UART_DCD		(0x8 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_8		(0x1 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_16		(0x2 << 24)
+#define MPC52xx_PSC_SICR_SIM_AC97		(0x3 << 24)
+#define MPC52xx_PSC_SICR_SIM_SIR		(0x8 << 24)
+#define MPC52xx_PSC_SICR_SIM_SIR_DCD		(0xc << 24)
+#define MPC52xx_PSC_SICR_SIM_MIR		(0x5 << 24)
+#define MPC52xx_PSC_SICR_SIM_FIR		(0x6 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_24		(0x7 << 24)
+#define MPC52xx_PSC_SICR_SIM_CODEC_32		(0xf << 24)
+#define MPC52xx_PSC_SICR_GENCLK			(1 << 23)
+#define MPC52xx_PSC_SICR_I2S			(1 << 22)
+#define MPC52xx_PSC_SICR_CLKPOL			(1 << 21)
+#define MPC52xx_PSC_SICR_SYNCPOL		(1 << 20)
+#define MPC52xx_PSC_SICR_CELLSLAVE		(1 << 19)
+#define MPC52xx_PSC_SICR_CELL2XCLK		(1 << 18)
+#define MPC52xx_PSC_SICR_ESAI			(1 << 17)
+#define MPC52xx_PSC_SICR_ENAC97			(1 << 16)
+#define MPC52xx_PSC_SICR_SPI			(1 << 15)
+#define MPC52xx_PSC_SICR_MSTR			(1 << 14)
+#define MPC52xx_PSC_SICR_CPOL			(1 << 13)
+#define MPC52xx_PSC_SICR_CPHA			(1 << 12)
+#define MPC52xx_PSC_SICR_USEEOF			(1 << 11)
+#define MPC52xx_PSC_SICR_DISABLEEOF		(1 << 10)
+
+/* Structure of the hardware registers */
+struct mpc52xx_psc {
+	u8		mode;		/* PSC + 0x00 */
+	u8		reserved0[3];
+	union {				/* PSC + 0x04 */
+		u16	status;
+		u16	clock_select;
+	} sr_csr;
+#define mpc52xx_psc_status	sr_csr.status
+#define mpc52xx_psc_clock_select sr_csr.clock_select
+	u16		reserved1;
+	u8		command;	/* PSC + 0x08 */
+	u8		reserved2[3];
+	union {				/* PSC + 0x0c */
+		u8	buffer_8;
+		u16	buffer_16;
+		u32	buffer_32;
+	} buffer;
+#define mpc52xx_psc_buffer_8	buffer.buffer_8
+#define mpc52xx_psc_buffer_16	buffer.buffer_16
+#define mpc52xx_psc_buffer_32	buffer.buffer_32
+	union {				/* PSC + 0x10 */
+		u8	ipcr;
+		u8	acr;
+	} ipcr_acr;
+#define mpc52xx_psc_ipcr	ipcr_acr.ipcr
+#define mpc52xx_psc_acr		ipcr_acr.acr
+	u8		reserved3[3];
+	union {				/* PSC + 0x14 */
+		u16	isr;
+		u16	imr;
+	} isr_imr;
+#define mpc52xx_psc_isr		isr_imr.isr
+#define mpc52xx_psc_imr		isr_imr.imr
+	u16		reserved4;
+	u8		ctur;		/* PSC + 0x18 */
+	u8		reserved5[3];
+	u8		ctlr;		/* PSC + 0x1c */
+	u8		reserved6[3];
+	/* BitClkDiv field of CCR is byte swapped in
+	 * the hardware for mpc5200/b compatibility */
+	u32		ccr;		/* PSC + 0x20 */
+	u32		ac97_slots;	/* PSC + 0x24 */
+	u32		ac97_cmd;	/* PSC + 0x28 */
+	u32		ac97_data;	/* PSC + 0x2c */
+	u8		ivr;		/* PSC + 0x30 */
+	u8		reserved8[3];
+	u8		ip;		/* PSC + 0x34 */
+	u8		reserved9[3];
+	u8		op1;		/* PSC + 0x38 */
+	u8		reserved10[3];
+	u8		op0;		/* PSC + 0x3c */
+	u8		reserved11[3];
+	u32		sicr;		/* PSC + 0x40 */
+	u8		ircr1;		/* PSC + 0x44 */
+	u8		reserved13[3];
+	u8		ircr2;		/* PSC + 0x44 */
+	u8		reserved14[3];
+	u8		irsdr;		/* PSC + 0x4c */
+	u8		reserved15[3];
+	u8		irmdr;		/* PSC + 0x50 */
+	u8		reserved16[3];
+	u8		irfdr;		/* PSC + 0x54 */
+	u8		reserved17[3];
+};
+
+struct mpc52xx_psc_fifo {
+	u16		rfnum;		/* PSC + 0x58 */
+	u16		reserved18;
+	u16		tfnum;		/* PSC + 0x5c */
+	u16		reserved19;
+	u32		rfdata;		/* PSC + 0x60 */
+	u16		rfstat;		/* PSC + 0x64 */
+	u16		reserved20;
+	u8		rfcntl;		/* PSC + 0x68 */
+	u8		reserved21[5];
+	u16		rfalarm;	/* PSC + 0x6e */
+	u16		reserved22;
+	u16		rfrptr;		/* PSC + 0x72 */
+	u16		reserved23;
+	u16		rfwptr;		/* PSC + 0x76 */
+	u16		reserved24;
+	u16		rflrfptr;	/* PSC + 0x7a */
+	u16		reserved25;
+	u16		rflwfptr;	/* PSC + 0x7e */
+	u32		tfdata;		/* PSC + 0x80 */
+	u16		tfstat;		/* PSC + 0x84 */
+	u16		reserved26;
+	u8		tfcntl;		/* PSC + 0x88 */
+	u8		reserved27[5];
+	u16		tfalarm;	/* PSC + 0x8e */
+	u16		reserved28;
+	u16		tfrptr;		/* PSC + 0x92 */
+	u16		reserved29;
+	u16		tfwptr;		/* PSC + 0x96 */
+	u16		reserved30;
+	u16		tflrfptr;	/* PSC + 0x9a */
+	u16		reserved31;
+	u16		tflwfptr;	/* PSC + 0x9e */
+};
+
+#define MPC512x_PSC_FIFO_RESET_SLICE	0x80
+#define MPC512x_PSC_FIFO_ENABLE_SLICE	0x01
+#define MPC512x_PSC_FIFO_ENABLE_DMA	0x04
+
+#define MPC512x_PSC_FIFO_EMPTY		0x1
+#define MPC512x_PSC_FIFO_FULL		0x2
+#define MPC512x_PSC_FIFO_ALARM		0x4
+#define MPC512x_PSC_FIFO_URERR		0x8
+#define MPC512x_PSC_FIFO_ORERR		0x01
+#define MPC512x_PSC_FIFO_MEMERROR	0x02
+
+struct mpc512x_psc_fifo {
+	u32		reserved1[10];
+	u32		txcmd;		/* PSC + 0x80 */
+	u32		txalarm;	/* PSC + 0x84 */
+	u32		txsr;		/* PSC + 0x88 */
+	u32		txisr;		/* PSC + 0x8c */
+	u32		tximr;		/* PSC + 0x90 */
+	u32		txcnt;		/* PSC + 0x94 */
+	u32		txptr;		/* PSC + 0x98 */
+	u32		txsz;		/* PSC + 0x9c */
+	u32		reserved2[7];
+	union {
+		u8	txdata_8;
+		u16	txdata_16;
+		u32	txdata_32;
+	} txdata; 			/* PSC + 0xbc */
+#define txdata_8 txdata.txdata_8
+#define txdata_16 txdata.txdata_16
+#define txdata_32 txdata.txdata_32
+	u32		rxcmd;		/* PSC + 0xc0 */
+	u32		rxalarm;	/* PSC + 0xc4 */
+	u32		rxsr;		/* PSC + 0xc8 */
+	u32		rxisr;		/* PSC + 0xcc */
+	u32		rximr;		/* PSC + 0xd0 */
+	u32		rxcnt;		/* PSC + 0xd4 */
+	u32		rxptr;		/* PSC + 0xd8 */
+	u32		rxsz;		/* PSC + 0xdc */
+	u32		reserved3[7];
+	union {
+		u8	rxdata_8;
+		u16	rxdata_16;
+		u32	rxdata_32;
+	} rxdata; 			/* PSC + 0xfc */
+#define rxdata_8 rxdata.rxdata_8
+#define rxdata_16 rxdata.rxdata_16
+#define rxdata_32 rxdata.rxdata_32
+};
+
+#endif  /* __ASM_MPC52xx_PSC_H__ */
diff --git a/arch/powerpc/include/asm/mpc6xx.h b/arch/powerpc/include/asm/mpc6xx.h
new file mode 100644
index 000000000000..effc2291beb2
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc6xx.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_POWERPC_MPC6xx_H
+#define __ASM_POWERPC_MPC6xx_H
+
+void mpc6xx_enter_standby(void);
+
+#endif
diff --git a/arch/powerpc/include/asm/mpc8260.h b/arch/powerpc/include/asm/mpc8260.h
new file mode 100644
index 000000000000..03317e1e6185
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc8260.h
@@ -0,0 +1,25 @@
+/*
+ * Since there are many different boards and no standard configuration,
+ * we have a unique include file for each.  Rather than change every
+ * file that has to include MPC8260 configuration, they all include
+ * this one and the configuration switching is done here.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_MPC8260_H__
+#define __ASM_POWERPC_MPC8260_H__
+
+#define MPC82XX_BCR_PLDP 0x00800000 /* Pipeline Maximum Depth */
+
+#ifdef CONFIG_8260
+
+#if defined(CONFIG_PQ2ADS) || defined (CONFIG_PQ2FADS)
+#include <platforms/82xx/pq2ads.h>
+#endif
+
+#ifdef CONFIG_PCI_8260
+#include <platforms/82xx/m82xx_pci.h>
+#endif
+
+#endif /* CONFIG_8260 */
+#endif /* !__ASM_POWERPC_MPC8260_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/mpc86xx.h b/arch/powerpc/include/asm/mpc86xx.h
new file mode 100644
index 000000000000..15f650f987e7
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc86xx.h
@@ -0,0 +1,33 @@
+/*
+ * MPC86xx definitions
+ *
+ * Author: Jeff Brown
+ *
+ * Copyright 2004 Freescale Semiconductor, Inc
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_MPC86xx_H__
+#define __ASM_POWERPC_MPC86xx_H__
+
+#include <asm/mmu.h>
+
+#ifdef CONFIG_PPC_86xx
+
+#define CPU0_BOOT_RELEASE 0x01000000
+#define CPU1_BOOT_RELEASE 0x02000000
+#define CPU_ALL_RELEASED (CPU0_BOOT_RELEASE | CPU1_BOOT_RELEASE)
+#define MCM_PORT_CONFIG_OFFSET 0x1010
+
+/* Offset from CCSRBAR */
+#define MPC86xx_MCM_OFFSET      (0x00000)
+#define MPC86xx_MCM_SIZE        (0x02000)
+
+#endif /* CONFIG_PPC_86xx */
+#endif /* __ASM_POWERPC_MPC86xx_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/mpc8xx.h b/arch/powerpc/include/asm/mpc8xx.h
new file mode 100644
index 000000000000..98f3c4f17328
--- /dev/null
+++ b/arch/powerpc/include/asm/mpc8xx.h
@@ -0,0 +1,12 @@
+/* This is the single file included by all MPC8xx build options.
+ * Since there are many different boards and no standard configuration,
+ * we have a unique include file for each.  Rather than change every
+ * file that has to include MPC8xx configuration, they all include
+ * this one and the configuration switching is done here.
+ */
+#ifndef __CONFIG_8xx_DEFS
+#define __CONFIG_8xx_DEFS
+
+extern struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
+
+#endif /* __CONFIG_8xx_DEFS */
diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h
new file mode 100644
index 000000000000..fe566a348a86
--- /dev/null
+++ b/arch/powerpc/include/asm/mpic.h
@@ -0,0 +1,481 @@
+#ifndef _ASM_POWERPC_MPIC_H
+#define _ASM_POWERPC_MPIC_H
+#ifdef __KERNEL__
+
+#include <linux/irq.h>
+#include <linux/sysdev.h>
+#include <asm/dcr.h>
+
+/*
+ * Global registers
+ */
+
+#define MPIC_GREG_BASE			0x01000
+
+#define MPIC_GREG_FEATURE_0		0x00000
+#define		MPIC_GREG_FEATURE_LAST_SRC_MASK		0x07ff0000
+#define		MPIC_GREG_FEATURE_LAST_SRC_SHIFT	16
+#define		MPIC_GREG_FEATURE_LAST_CPU_MASK		0x00001f00
+#define		MPIC_GREG_FEATURE_LAST_CPU_SHIFT	8
+#define		MPIC_GREG_FEATURE_VERSION_MASK		0xff
+#define MPIC_GREG_FEATURE_1		0x00010
+#define MPIC_GREG_GLOBAL_CONF_0		0x00020
+#define		MPIC_GREG_GCONF_RESET			0x80000000
+#define		MPIC_GREG_GCONF_8259_PTHROU_DIS		0x20000000
+#define		MPIC_GREG_GCONF_NO_BIAS			0x10000000
+#define		MPIC_GREG_GCONF_BASE_MASK		0x000fffff
+#define		MPIC_GREG_GCONF_MCK			0x08000000
+#define MPIC_GREG_GLOBAL_CONF_1		0x00030
+#define		MPIC_GREG_GLOBAL_CONF_1_SIE		0x08000000
+#define		MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK	0x70000000
+#define		MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(r)	\
+			(((r) << 28) & MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK)
+#define MPIC_GREG_VENDOR_0		0x00040
+#define MPIC_GREG_VENDOR_1		0x00050
+#define MPIC_GREG_VENDOR_2		0x00060
+#define MPIC_GREG_VENDOR_3		0x00070
+#define MPIC_GREG_VENDOR_ID		0x00080
+#define 	MPIC_GREG_VENDOR_ID_STEPPING_MASK	0x00ff0000
+#define 	MPIC_GREG_VENDOR_ID_STEPPING_SHIFT	16
+#define 	MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK	0x0000ff00
+#define 	MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT	8
+#define 	MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK	0x000000ff
+#define MPIC_GREG_PROCESSOR_INIT	0x00090
+#define MPIC_GREG_IPI_VECTOR_PRI_0	0x000a0
+#define MPIC_GREG_IPI_VECTOR_PRI_1	0x000b0
+#define MPIC_GREG_IPI_VECTOR_PRI_2	0x000c0
+#define MPIC_GREG_IPI_VECTOR_PRI_3	0x000d0
+#define MPIC_GREG_IPI_STRIDE		0x10
+#define MPIC_GREG_SPURIOUS		0x000e0
+#define MPIC_GREG_TIMER_FREQ		0x000f0
+
+/*
+ *
+ * Timer registers
+ */
+#define MPIC_TIMER_BASE			0x01100
+#define MPIC_TIMER_STRIDE		0x40
+
+#define MPIC_TIMER_CURRENT_CNT		0x00000
+#define MPIC_TIMER_BASE_CNT		0x00010
+#define MPIC_TIMER_VECTOR_PRI		0x00020
+#define MPIC_TIMER_DESTINATION		0x00030
+
+/*
+ * Per-Processor registers
+ */
+
+#define MPIC_CPU_THISBASE		0x00000
+#define MPIC_CPU_BASE			0x20000
+#define MPIC_CPU_STRIDE			0x01000
+
+#define MPIC_CPU_IPI_DISPATCH_0		0x00040
+#define MPIC_CPU_IPI_DISPATCH_1		0x00050
+#define MPIC_CPU_IPI_DISPATCH_2		0x00060
+#define MPIC_CPU_IPI_DISPATCH_3		0x00070
+#define MPIC_CPU_IPI_DISPATCH_STRIDE	0x00010
+#define MPIC_CPU_CURRENT_TASK_PRI	0x00080
+#define 	MPIC_CPU_TASKPRI_MASK			0x0000000f
+#define MPIC_CPU_WHOAMI			0x00090
+#define 	MPIC_CPU_WHOAMI_MASK			0x0000001f
+#define MPIC_CPU_INTACK			0x000a0
+#define MPIC_CPU_EOI			0x000b0
+#define MPIC_CPU_MCACK			0x000c0
+
+/*
+ * Per-source registers
+ */
+
+#define MPIC_IRQ_BASE			0x10000
+#define MPIC_IRQ_STRIDE			0x00020
+#define MPIC_IRQ_VECTOR_PRI		0x00000
+#define 	MPIC_VECPRI_MASK			0x80000000
+#define 	MPIC_VECPRI_ACTIVITY			0x40000000	/* Read Only */
+#define 	MPIC_VECPRI_PRIORITY_MASK		0x000f0000
+#define 	MPIC_VECPRI_PRIORITY_SHIFT		16
+#define 	MPIC_VECPRI_VECTOR_MASK			0x000007ff
+#define 	MPIC_VECPRI_POLARITY_POSITIVE		0x00800000
+#define 	MPIC_VECPRI_POLARITY_NEGATIVE		0x00000000
+#define 	MPIC_VECPRI_POLARITY_MASK		0x00800000
+#define 	MPIC_VECPRI_SENSE_LEVEL			0x00400000
+#define 	MPIC_VECPRI_SENSE_EDGE			0x00000000
+#define 	MPIC_VECPRI_SENSE_MASK			0x00400000
+#define MPIC_IRQ_DESTINATION		0x00010
+
+#define MPIC_MAX_IRQ_SOURCES	2048
+#define MPIC_MAX_CPUS		32
+#define MPIC_MAX_ISU		32
+
+/*
+ * Tsi108 implementation of MPIC has many differences from the original one
+ */
+
+/*
+ * Global registers
+ */
+
+#define TSI108_GREG_BASE		0x00000
+#define TSI108_GREG_FEATURE_0		0x00000
+#define TSI108_GREG_GLOBAL_CONF_0	0x00004
+#define TSI108_GREG_VENDOR_ID		0x0000c
+#define TSI108_GREG_IPI_VECTOR_PRI_0	0x00204		/* Doorbell 0 */
+#define TSI108_GREG_IPI_STRIDE		0x0c
+#define TSI108_GREG_SPURIOUS		0x00010
+#define TSI108_GREG_TIMER_FREQ		0x00014
+
+/*
+ * Timer registers
+ */
+#define TSI108_TIMER_BASE		0x0030
+#define TSI108_TIMER_STRIDE		0x10
+#define TSI108_TIMER_CURRENT_CNT	0x00000
+#define TSI108_TIMER_BASE_CNT		0x00004
+#define TSI108_TIMER_VECTOR_PRI		0x00008
+#define TSI108_TIMER_DESTINATION	0x0000c
+
+/*
+ * Per-Processor registers
+ */
+#define TSI108_CPU_BASE			0x00300
+#define TSI108_CPU_STRIDE		0x00040
+#define TSI108_CPU_IPI_DISPATCH_0	0x00200
+#define TSI108_CPU_IPI_DISPATCH_STRIDE	0x00000
+#define TSI108_CPU_CURRENT_TASK_PRI	0x00000
+#define TSI108_CPU_WHOAMI		0xffffffff
+#define TSI108_CPU_INTACK		0x00004
+#define TSI108_CPU_EOI			0x00008
+#define TSI108_CPU_MCACK		0x00004 /* Doesn't really exist here */
+
+/*
+ * Per-source registers
+ */
+#define TSI108_IRQ_BASE			0x00100
+#define TSI108_IRQ_STRIDE		0x00008
+#define TSI108_IRQ_VECTOR_PRI		0x00000
+#define TSI108_VECPRI_VECTOR_MASK	0x000000ff
+#define TSI108_VECPRI_POLARITY_POSITIVE	0x01000000
+#define TSI108_VECPRI_POLARITY_NEGATIVE	0x00000000
+#define TSI108_VECPRI_SENSE_LEVEL	0x02000000
+#define TSI108_VECPRI_SENSE_EDGE	0x00000000
+#define TSI108_VECPRI_POLARITY_MASK	0x01000000
+#define TSI108_VECPRI_SENSE_MASK	0x02000000
+#define TSI108_IRQ_DESTINATION		0x00004
+
+/* weird mpic register indices and mask bits in the HW info array */
+enum {
+	MPIC_IDX_GREG_BASE = 0,
+	MPIC_IDX_GREG_FEATURE_0,
+	MPIC_IDX_GREG_GLOBAL_CONF_0,
+	MPIC_IDX_GREG_VENDOR_ID,
+	MPIC_IDX_GREG_IPI_VECTOR_PRI_0,
+	MPIC_IDX_GREG_IPI_STRIDE,
+	MPIC_IDX_GREG_SPURIOUS,
+	MPIC_IDX_GREG_TIMER_FREQ,
+
+	MPIC_IDX_TIMER_BASE,
+	MPIC_IDX_TIMER_STRIDE,
+	MPIC_IDX_TIMER_CURRENT_CNT,
+	MPIC_IDX_TIMER_BASE_CNT,
+	MPIC_IDX_TIMER_VECTOR_PRI,
+	MPIC_IDX_TIMER_DESTINATION,
+
+	MPIC_IDX_CPU_BASE,
+	MPIC_IDX_CPU_STRIDE,
+	MPIC_IDX_CPU_IPI_DISPATCH_0,
+	MPIC_IDX_CPU_IPI_DISPATCH_STRIDE,
+	MPIC_IDX_CPU_CURRENT_TASK_PRI,
+	MPIC_IDX_CPU_WHOAMI,
+	MPIC_IDX_CPU_INTACK,
+	MPIC_IDX_CPU_EOI,
+	MPIC_IDX_CPU_MCACK,
+
+	MPIC_IDX_IRQ_BASE,
+	MPIC_IDX_IRQ_STRIDE,
+	MPIC_IDX_IRQ_VECTOR_PRI,
+
+	MPIC_IDX_VECPRI_VECTOR_MASK,
+	MPIC_IDX_VECPRI_POLARITY_POSITIVE,
+	MPIC_IDX_VECPRI_POLARITY_NEGATIVE,
+	MPIC_IDX_VECPRI_SENSE_LEVEL,
+	MPIC_IDX_VECPRI_SENSE_EDGE,
+	MPIC_IDX_VECPRI_POLARITY_MASK,
+	MPIC_IDX_VECPRI_SENSE_MASK,
+	MPIC_IDX_IRQ_DESTINATION,
+	MPIC_IDX_END
+};
+
+
+#ifdef CONFIG_MPIC_U3_HT_IRQS
+/* Fixup table entry */
+struct mpic_irq_fixup
+{
+	u8 __iomem	*base;
+	u8 __iomem	*applebase;
+	u32		data;
+	unsigned int	index;
+};
+#endif /* CONFIG_MPIC_U3_HT_IRQS */
+
+
+enum mpic_reg_type {
+	mpic_access_mmio_le,
+	mpic_access_mmio_be,
+#ifdef CONFIG_PPC_DCR
+	mpic_access_dcr
+#endif
+};
+
+struct mpic_reg_bank {
+	u32 __iomem	*base;
+#ifdef CONFIG_PPC_DCR
+	dcr_host_t	dhost;
+#endif /* CONFIG_PPC_DCR */
+};
+
+struct mpic_irq_save {
+	u32		vecprio,
+			dest;
+#ifdef CONFIG_MPIC_U3_HT_IRQS
+	u32		fixup_data;
+#endif
+};
+
+/* The instance data of a given MPIC */
+struct mpic
+{
+	/* The remapper for this MPIC */
+	struct irq_host		*irqhost;
+
+	/* The "linux" controller struct */
+	struct irq_chip		hc_irq;
+#ifdef CONFIG_MPIC_U3_HT_IRQS
+	struct irq_chip		hc_ht_irq;
+#endif
+#ifdef CONFIG_SMP
+	struct irq_chip		hc_ipi;
+#endif
+	const char		*name;
+	/* Flags */
+	unsigned int		flags;
+	/* How many irq sources in a given ISU */
+	unsigned int		isu_size;
+	unsigned int		isu_shift;
+	unsigned int		isu_mask;
+	unsigned int		irq_count;
+	/* Number of sources */
+	unsigned int		num_sources;
+	/* Number of CPUs */
+	unsigned int		num_cpus;
+	/* default senses array */
+	unsigned char		*senses;
+	unsigned int		senses_count;
+
+	/* vector numbers used for internal sources (ipi/timers) */
+	unsigned int		ipi_vecs[4];
+	unsigned int		timer_vecs[4];
+
+	/* Spurious vector to program into unused sources */
+	unsigned int		spurious_vec;
+
+#ifdef CONFIG_MPIC_U3_HT_IRQS
+	/* The fixup table */
+	struct mpic_irq_fixup	*fixups;
+	spinlock_t		fixup_lock;
+#endif
+
+	/* Register access method */
+	enum mpic_reg_type	reg_type;
+
+	/* The various ioremap'ed bases */
+	struct mpic_reg_bank	gregs;
+	struct mpic_reg_bank	tmregs;
+	struct mpic_reg_bank	cpuregs[MPIC_MAX_CPUS];
+	struct mpic_reg_bank	isus[MPIC_MAX_ISU];
+
+	/* Protected sources */
+	unsigned long		*protected;
+
+#ifdef CONFIG_MPIC_WEIRD
+	/* Pointer to HW info array */
+	u32			*hw_set;
+#endif
+
+#ifdef CONFIG_PCI_MSI
+	spinlock_t		bitmap_lock;
+	unsigned long		*hwirq_bitmap;
+#endif
+
+#ifdef CONFIG_MPIC_BROKEN_REGREAD
+	u32			isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES];
+#endif
+
+	/* link */
+	struct mpic		*next;
+
+	struct sys_device	sysdev;
+
+#ifdef CONFIG_PM
+	struct mpic_irq_save	*save_data;
+#endif
+};
+
+/*
+ * MPIC flags (passed to mpic_alloc)
+ *
+ * The top 4 bits contain an MPIC bhw id that is used to index the
+ * register offsets and some masks when CONFIG_MPIC_WEIRD is set.
+ * Note setting any ID (leaving those bits to 0) means standard MPIC
+ */
+
+/* This is the primary controller, only that one has IPIs and
+ * has afinity control. A non-primary MPIC always uses CPU0
+ * registers only
+ */
+#define MPIC_PRIMARY			0x00000001
+
+/* Set this for a big-endian MPIC */
+#define MPIC_BIG_ENDIAN			0x00000002
+/* Broken U3 MPIC */
+#define MPIC_U3_HT_IRQS			0x00000004
+/* Broken IPI registers (autodetected) */
+#define MPIC_BROKEN_IPI			0x00000008
+/* MPIC wants a reset */
+#define MPIC_WANTS_RESET		0x00000010
+/* Spurious vector requires EOI */
+#define MPIC_SPV_EOI			0x00000020
+/* No passthrough disable */
+#define MPIC_NO_PTHROU_DIS		0x00000040
+/* DCR based MPIC */
+#define MPIC_USES_DCR			0x00000080
+/* MPIC has 11-bit vector fields (or larger) */
+#define MPIC_LARGE_VECTORS		0x00000100
+/* Enable delivery of prio 15 interrupts as MCK instead of EE */
+#define MPIC_ENABLE_MCK			0x00000200
+/* Disable bias among target selection, spread interrupts evenly */
+#define MPIC_NO_BIAS			0x00000400
+/* Ignore NIRQS as reported by FRR */
+#define MPIC_BROKEN_FRR_NIRQS		0x00000800
+
+/* MPIC HW modification ID */
+#define MPIC_REGSET_MASK		0xf0000000
+#define MPIC_REGSET(val)		(((val) & 0xf ) << 28)
+#define MPIC_GET_REGSET(flags)		(((flags) >> 28) & 0xf)
+
+#define	MPIC_REGSET_STANDARD		MPIC_REGSET(0)	/* Original MPIC */
+#define	MPIC_REGSET_TSI108		MPIC_REGSET(1)	/* Tsi108/109 PIC */
+
+/* Allocate the controller structure and setup the linux irq descs
+ * for the range if interrupts passed in. No HW initialization is
+ * actually performed.
+ * 
+ * @phys_addr:	physial base address of the MPIC
+ * @flags:	flags, see constants above
+ * @isu_size:	number of interrupts in an ISU. Use 0 to use a
+ *              standard ISU-less setup (aka powermac)
+ * @irq_offset: first irq number to assign to this mpic
+ * @irq_count:  number of irqs to use with this mpic IRQ sources. Pass 0
+ *	        to match the number of sources
+ * @ipi_offset: first irq number to assign to this mpic IPI sources,
+ *		used only on primary mpic
+ * @senses:	array of sense values
+ * @senses_num: number of entries in the array
+ *
+ * Note about the sense array. If none is passed, all interrupts are
+ * setup to be level negative unless MPIC_U3_HT_IRQS is set in which
+ * case they are edge positive (and the array is ignored anyway).
+ * The values in the array start at the first source of the MPIC,
+ * that is senses[0] correspond to linux irq "irq_offset".
+ */
+extern struct mpic *mpic_alloc(struct device_node *node,
+			       phys_addr_t phys_addr,
+			       unsigned int flags,
+			       unsigned int isu_size,
+			       unsigned int irq_count,
+			       const char *name);
+
+/* Assign ISUs, to call before mpic_init()
+ *
+ * @mpic:	controller structure as returned by mpic_alloc()
+ * @isu_num:	ISU number
+ * @phys_addr:	physical address of the ISU
+ */
+extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
+			    phys_addr_t phys_addr);
+
+/* Set default sense codes
+ *
+ * @mpic:	controller
+ * @senses:	array of sense codes
+ * @count:	size of above array
+ *
+ * Optionally provide an array (indexed on hardware interrupt numbers
+ * for this MPIC) of default sense codes for the chip. Those are linux
+ * sense codes IRQ_TYPE_*
+ *
+ * The driver gets ownership of the pointer, don't dispose of it or
+ * anything like that. __init only.
+ */
+extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count);
+
+
+/* Initialize the controller. After this has been called, none of the above
+ * should be called again for this mpic
+ */
+extern void mpic_init(struct mpic *mpic);
+
+/*
+ * All of the following functions must only be used after the
+ * ISUs have been assigned and the controller fully initialized
+ * with mpic_init()
+ */
+
+
+/* Change the priority of an interrupt. Default is 8 for irqs and
+ * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the
+ * IPI number is then the offset'ed (linux irq number mapped to the IPI)
+ */
+extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);
+
+/* Setup a non-boot CPU */
+extern void mpic_setup_this_cpu(void);
+
+/* Clean up for kexec (or cpu offline or ...) */
+extern void mpic_teardown_this_cpu(int secondary);
+
+/* Get the current cpu priority for this cpu (0..15) */
+extern int mpic_cpu_get_priority(void);
+
+/* Set the current cpu priority for this cpu */
+extern void mpic_cpu_set_priority(int prio);
+
+/* Request IPIs on primary mpic */
+extern void mpic_request_ipis(void);
+
+/* Send an IPI (non offseted number 0..3) */
+extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask);
+
+/* Send a message (IPI) to a given target (cpu number or MSG_*) */
+void smp_mpic_message_pass(int target, int msg);
+
+/* Unmask a specific virq */
+extern void mpic_unmask_irq(unsigned int irq);
+/* Mask a specific virq */
+extern void mpic_mask_irq(unsigned int irq);
+/* EOI a specific virq */
+extern void mpic_end_irq(unsigned int irq);
+
+/* Fetch interrupt from a given mpic */
+extern unsigned int mpic_get_one_irq(struct mpic *mpic);
+/* This one gets from the primary mpic */
+extern unsigned int mpic_get_irq(void);
+/* Fetch Machine Check interrupt from primary mpic */
+extern unsigned int mpic_get_mcirq(void);
+
+/* Set the EPIC clock ratio */
+void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio);
+
+/* Enable/Disable EPIC serial interrupt mode */
+void mpic_set_serial_int(struct mpic *mpic, int enable);
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_MPIC_H */
diff --git a/arch/powerpc/include/asm/msgbuf.h b/arch/powerpc/include/asm/msgbuf.h
new file mode 100644
index 000000000000..dd76743c7537
--- /dev/null
+++ b/arch/powerpc/include/asm/msgbuf.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_POWERPC_MSGBUF_H
+#define _ASM_POWERPC_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for the PowerPC architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+#ifndef __powerpc64__
+	unsigned int	__unused1;
+#endif
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+#ifndef __powerpc64__
+	unsigned int	__unused2;
+#endif
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+#ifndef __powerpc64__
+	unsigned int	__unused3;
+#endif
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif	/* _ASM_POWERPC_MSGBUF_H */
diff --git a/arch/powerpc/include/asm/mutex.h b/arch/powerpc/include/asm/mutex.h
new file mode 100644
index 000000000000..458c1f7fbc18
--- /dev/null
+++ b/arch/powerpc/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/powerpc/include/asm/nvram.h b/arch/powerpc/include/asm/nvram.h
new file mode 100644
index 000000000000..efde5ac82f7b
--- /dev/null
+++ b/arch/powerpc/include/asm/nvram.h
@@ -0,0 +1,139 @@
+/*
+ * NVRAM definitions and access functions.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_NVRAM_H
+#define _ASM_POWERPC_NVRAM_H
+
+#include <linux/errno.h>
+
+#define NVRW_CNT 0x20
+#define NVRAM_HEADER_LEN 16 /* sizeof(struct nvram_header) */
+#define NVRAM_BLOCK_LEN 16
+#define NVRAM_MAX_REQ (2080/NVRAM_BLOCK_LEN)
+#define NVRAM_MIN_REQ (1056/NVRAM_BLOCK_LEN)
+
+#define NVRAM_AS0  0x74
+#define NVRAM_AS1  0x75
+#define NVRAM_DATA 0x77
+
+
+/* RTC Offsets */
+
+#define MOTO_RTC_SECONDS	0x1FF9
+#define MOTO_RTC_MINUTES	0x1FFA
+#define MOTO_RTC_HOURS		0x1FFB
+#define MOTO_RTC_DAY_OF_WEEK	0x1FFC
+#define MOTO_RTC_DAY_OF_MONTH	0x1FFD
+#define MOTO_RTC_MONTH		0x1FFE
+#define MOTO_RTC_YEAR		0x1FFF
+#define MOTO_RTC_CONTROLA       0x1FF8
+#define MOTO_RTC_CONTROLB       0x1FF9
+
+#define NVRAM_SIG_SP	0x02	/* support processor */
+#define NVRAM_SIG_OF	0x50	/* open firmware config */
+#define NVRAM_SIG_FW	0x51	/* general firmware */
+#define NVRAM_SIG_HW	0x52	/* hardware (VPD) */
+#define NVRAM_SIG_FLIP	0x5a	/* Apple flip/flop header */
+#define NVRAM_SIG_APPL	0x5f	/* Apple "system" (???) */
+#define NVRAM_SIG_SYS	0x70	/* system env vars */
+#define NVRAM_SIG_CFG	0x71	/* config data */
+#define NVRAM_SIG_ELOG	0x72	/* error log */
+#define NVRAM_SIG_VEND	0x7e	/* vendor defined */
+#define NVRAM_SIG_FREE	0x7f	/* Free space */
+#define NVRAM_SIG_OS	0xa0	/* OS defined */
+#define NVRAM_SIG_PANIC	0xa1	/* Apple OSX "panic" */
+
+/* If change this size, then change the size of NVNAME_LEN */
+struct nvram_header {
+	unsigned char signature;
+	unsigned char checksum;
+	unsigned short length;
+	char name[12];
+};
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+
+struct nvram_partition {
+	struct list_head partition;
+	struct nvram_header header;
+	unsigned int index;
+};
+
+
+extern int nvram_write_error_log(char * buff, int length,
+					 unsigned int err_type, unsigned int err_seq);
+extern int nvram_read_error_log(char * buff, int length,
+					 unsigned int * err_type, unsigned int *err_seq);
+extern int nvram_clear_error_log(void);
+extern struct nvram_partition *nvram_find_partition(int sig, const char *name);
+
+extern int pSeries_nvram_init(void);
+
+#ifdef CONFIG_MMIO_NVRAM
+extern int mmio_nvram_init(void);
+#else
+static inline int mmio_nvram_init(void)
+{
+	return -ENODEV;
+}
+#endif
+
+#endif /* __KERNEL__ */
+
+/* PowerMac specific nvram stuffs */
+
+enum {
+	pmac_nvram_OF,		/* Open Firmware partition */
+	pmac_nvram_XPRAM,	/* MacOS XPRAM partition */
+	pmac_nvram_NR		/* MacOS Name Registry partition */
+};
+
+#ifdef __KERNEL__
+/* Return partition offset in nvram */
+extern int	pmac_get_partition(int partition);
+
+/* Direct access to XPRAM on PowerMacs */
+extern u8	pmac_xpram_read(int xpaddr);
+extern void	pmac_xpram_write(int xpaddr, u8 data);
+
+/* Synchronize NVRAM */
+extern void	nvram_sync(void);
+
+/* Normal access to NVRAM */
+extern unsigned char nvram_read_byte(int i);
+extern void nvram_write_byte(unsigned char c, int i);
+#endif
+
+/* Some offsets in XPRAM */
+#define PMAC_XPRAM_MACHINE_LOC	0xe4
+#define PMAC_XPRAM_SOUND_VOLUME	0x08
+
+/* Machine location structure in PowerMac XPRAM */
+struct pmac_machine_location {
+	unsigned int	latitude;	/* 2+30 bit Fractional number */
+	unsigned int	longitude;	/* 2+30 bit Fractional number */
+	unsigned int	delta;		/* mix of GMT delta and DLS */
+};
+
+/*
+ * /dev/nvram ioctls
+ *
+ * Note that PMAC_NVRAM_GET_OFFSET is still supported, but is
+ * definitely obsolete. Do not use it if you can avoid it
+ */
+
+#define OBSOLETE_PMAC_NVRAM_GET_OFFSET \
+				_IOWR('p', 0x40, int)
+
+#define IOC_NVRAM_GET_OFFSET	_IOWR('p', 0x42, int)	/* Get NVRAM partition offset */
+#define IOC_NVRAM_SYNC		_IO('p', 0x43)		/* Sync NVRAM image */
+
+#endif /* _ASM_POWERPC_NVRAM_H */
diff --git a/arch/powerpc/include/asm/of_device.h b/arch/powerpc/include/asm/of_device.h
new file mode 100644
index 000000000000..3c123990ca2e
--- /dev/null
+++ b/arch/powerpc/include/asm/of_device.h
@@ -0,0 +1,31 @@
+#ifndef _ASM_POWERPC_OF_DEVICE_H
+#define _ASM_POWERPC_OF_DEVICE_H
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <linux/of.h>
+
+/*
+ * The of_device is a kind of "base class" that is a superset of
+ * struct device for use by devices attached to an OF node and
+ * probed using OF properties.
+ */
+struct of_device
+{
+	struct device_node	*node;		/* to be obsoleted */
+	u64			dma_mask;	/* DMA mask */
+	struct device		dev;		/* Generic device interface */
+};
+
+extern struct of_device *of_device_alloc(struct device_node *np,
+					 const char *bus_id,
+					 struct device *parent);
+
+extern int of_device_uevent(struct device *dev,
+			    struct kobj_uevent_env *env);
+
+/* This is just here during the transition */
+#include <linux/of_device.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_OF_DEVICE_H */
diff --git a/arch/powerpc/include/asm/of_platform.h b/arch/powerpc/include/asm/of_platform.h
new file mode 100644
index 000000000000..18659ef72139
--- /dev/null
+++ b/arch/powerpc/include/asm/of_platform.h
@@ -0,0 +1,42 @@
+#ifndef _ASM_POWERPC_OF_PLATFORM_H
+#define _ASM_POWERPC_OF_PLATFORM_H
+/*
+ *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *			 <benh@kernel.crashing.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+/* This is just here during the transition */
+#include <linux/of_platform.h>
+
+/* Platform drivers register/unregister */
+static inline int of_register_platform_driver(struct of_platform_driver *drv)
+{
+	return of_register_driver(drv, &of_platform_bus_type);
+}
+static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
+{
+	of_unregister_driver(drv);
+}
+
+/* Platform devices and busses creation */
+extern struct of_device *of_platform_device_create(struct device_node *np,
+						   const char *bus_id,
+						   struct device *parent);
+/* pseudo "matches" value to not do deep probe */
+#define OF_NO_DEEP_PROBE ((struct of_device_id *)-1)
+
+extern int of_platform_bus_probe(struct device_node *root,
+				 const struct of_device_id *matches,
+				 struct device *parent);
+
+extern struct of_device *of_find_device_by_phandle(phandle ph);
+
+extern void of_instantiate_rtc(void);
+
+#endif	/* _ASM_POWERPC_OF_PLATFORM_H */
diff --git a/arch/powerpc/include/asm/ohare.h b/arch/powerpc/include/asm/ohare.h
new file mode 100644
index 000000000000..0d030f9dea24
--- /dev/null
+++ b/arch/powerpc/include/asm/ohare.h
@@ -0,0 +1,54 @@
+#ifndef _ASM_POWERPC_OHARE_H
+#define _ASM_POWERPC_OHARE_H
+#ifdef __KERNEL__
+/*
+ * ohare.h: definitions for using the "O'Hare" I/O controller chip.
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ *
+ * BenH: Changed to match those of heathrow (but not all of them). Please
+ *       check if I didn't break anything (especially the media bay).
+ */
+
+/* offset from ohare base for feature control register */
+#define OHARE_MBCR	0x34
+#define OHARE_FCR	0x38
+
+/*
+ * Bits in feature control register.
+ * These were mostly derived by experiment on a powerbook 3400
+ * and may differ for other machines.
+ */
+#define OH_SCC_RESET		1
+#define OH_BAY_POWER_N		2	/* a guess */
+#define OH_BAY_PCI_ENABLE	4	/* a guess */
+#define OH_BAY_IDE_ENABLE	8
+#define OH_BAY_FLOPPY_ENABLE	0x10
+#define OH_IDE0_ENABLE		0x20
+#define OH_IDE0_RESET_N		0x40	/* a guess */
+#define OH_BAY_DEV_MASK		0x1c
+#define OH_BAY_RESET_N		0x80
+#define OH_IOBUS_ENABLE		0x100	/* IOBUS seems to be IDE */
+#define OH_SCC_ENABLE		0x200
+#define OH_MESH_ENABLE		0x400
+#define OH_FLOPPY_ENABLE	0x800
+#define OH_SCCA_IO		0x4000
+#define OH_SCCB_IO		0x8000
+#define OH_VIA_ENABLE		0x10000	/* Is apparently wrong, to be verified */
+#define OH_IDE1_RESET_N		0x800000
+
+/*
+ * Bits to set in the feature control register on PowerBooks.
+ */
+#define PBOOK_FEATURES		(OH_IDE_ENABLE | OH_SCC_ENABLE | \
+				 OH_MESH_ENABLE | OH_SCCA_IO | OH_SCCB_IO)
+
+/*
+ * A magic value to put into the feature control register of the
+ * "ohare" I/O controller on Starmaxes to enable the IDE CD interface.
+ * Contributed by Harry Eaton.
+ */
+#define STARMAX_FEATURES	0xbeff7a
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_OHARE_H */
diff --git a/arch/powerpc/include/asm/oprofile_impl.h b/arch/powerpc/include/asm/oprofile_impl.h
new file mode 100644
index 000000000000..95035c602ba6
--- /dev/null
+++ b/arch/powerpc/include/asm/oprofile_impl.h
@@ -0,0 +1,134 @@
+/*
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ * Based on alpha version.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_OPROFILE_IMPL_H
+#define _ASM_POWERPC_OPROFILE_IMPL_H
+#ifdef __KERNEL__
+
+#define OP_MAX_COUNTER 8
+
+/* Per-counter configuration as set via oprofilefs.  */
+struct op_counter_config {
+	unsigned long enabled;
+	unsigned long event;
+	unsigned long count;
+	/* Classic doesn't support per-counter user/kernel selection */
+	unsigned long kernel;
+	unsigned long user;
+	unsigned long unit_mask;
+};
+
+/* System-wide configuration as set via oprofilefs.  */
+struct op_system_config {
+#ifdef CONFIG_PPC64
+	unsigned long mmcr0;
+	unsigned long mmcr1;
+	unsigned long mmcra;
+#endif
+	unsigned long enable_kernel;
+	unsigned long enable_user;
+};
+
+/* Per-arch configuration */
+struct op_powerpc_model {
+	int (*reg_setup) (struct op_counter_config *,
+			   struct op_system_config *,
+			   int num_counters);
+	int  (*cpu_setup) (struct op_counter_config *);
+	int  (*start) (struct op_counter_config *);
+	int  (*global_start) (struct op_counter_config *);
+	void (*stop) (void);
+	void (*global_stop) (void);
+	int (*sync_start)(void);
+	int (*sync_stop)(void);
+	void (*handle_interrupt) (struct pt_regs *,
+				  struct op_counter_config *);
+	int num_counters;
+};
+
+extern struct op_powerpc_model op_model_fsl_emb;
+extern struct op_powerpc_model op_model_rs64;
+extern struct op_powerpc_model op_model_power4;
+extern struct op_powerpc_model op_model_7450;
+extern struct op_powerpc_model op_model_cell;
+extern struct op_powerpc_model op_model_pa6t;
+
+
+/* All the classic PPC parts use these */
+static inline unsigned int classic_ctr_read(unsigned int i)
+{
+	switch(i) {
+	case 0:
+		return mfspr(SPRN_PMC1);
+	case 1:
+		return mfspr(SPRN_PMC2);
+	case 2:
+		return mfspr(SPRN_PMC3);
+	case 3:
+		return mfspr(SPRN_PMC4);
+	case 4:
+		return mfspr(SPRN_PMC5);
+	case 5:
+		return mfspr(SPRN_PMC6);
+
+/* No PPC32 chip has more than 6 so far */
+#ifdef CONFIG_PPC64
+	case 6:
+		return mfspr(SPRN_PMC7);
+	case 7:
+		return mfspr(SPRN_PMC8);
+#endif
+	default:
+		return 0;
+	}
+}
+
+static inline void classic_ctr_write(unsigned int i, unsigned int val)
+{
+	switch(i) {
+	case 0:
+		mtspr(SPRN_PMC1, val);
+		break;
+	case 1:
+		mtspr(SPRN_PMC2, val);
+		break;
+	case 2:
+		mtspr(SPRN_PMC3, val);
+		break;
+	case 3:
+		mtspr(SPRN_PMC4, val);
+		break;
+	case 4:
+		mtspr(SPRN_PMC5, val);
+		break;
+	case 5:
+		mtspr(SPRN_PMC6, val);
+		break;
+
+/* No PPC32 chip has more than 6, yet */
+#ifdef CONFIG_PPC64
+	case 6:
+		mtspr(SPRN_PMC7, val);
+		break;
+	case 7:
+		mtspr(SPRN_PMC8, val);
+		break;
+#endif
+	default:
+		break;
+	}
+}
+
+
+extern void op_powerpc_backtrace(struct pt_regs * const regs, unsigned int depth);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_OPROFILE_IMPL_H */
diff --git a/arch/powerpc/include/asm/pSeries_reconfig.h b/arch/powerpc/include/asm/pSeries_reconfig.h
new file mode 100644
index 000000000000..e482e5352e69
--- /dev/null
+++ b/arch/powerpc/include/asm/pSeries_reconfig.h
@@ -0,0 +1,29 @@
+#ifndef _PPC64_PSERIES_RECONFIG_H
+#define _PPC64_PSERIES_RECONFIG_H
+#ifdef __KERNEL__
+
+#include <linux/notifier.h>
+
+/*
+ * Use this API if your code needs to know about OF device nodes being
+ * added or removed on pSeries systems.
+ */
+
+#define PSERIES_RECONFIG_ADD		0x0001
+#define PSERIES_RECONFIG_REMOVE		0x0002
+#define PSERIES_DRCONF_MEM_ADD		0x0003
+#define PSERIES_DRCONF_MEM_REMOVE	0x0004
+
+#ifdef CONFIG_PPC_PSERIES
+extern int pSeries_reconfig_notifier_register(struct notifier_block *);
+extern void pSeries_reconfig_notifier_unregister(struct notifier_block *);
+#else /* !CONFIG_PPC_PSERIES */
+static inline int pSeries_reconfig_notifier_register(struct notifier_block *nb)
+{
+	return 0;
+}
+static inline void pSeries_reconfig_notifier_unregister(struct notifier_block *nb) { }
+#endif /* CONFIG_PPC_PSERIES */
+
+#endif /* __KERNEL__ */
+#endif /* _PPC64_PSERIES_RECONFIG_H */
diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h
new file mode 100644
index 000000000000..6493a395508b
--- /dev/null
+++ b/arch/powerpc/include/asm/paca.h
@@ -0,0 +1,112 @@
+/*
+ * This control block defines the PACA which defines the processor
+ * specific data for each logical processor on the system.
+ * There are some pointers defined that are utilized by PLIC.
+ *
+ * C 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_PACA_H
+#define _ASM_POWERPC_PACA_H
+#ifdef __KERNEL__
+
+#include	<asm/types.h>
+#include	<asm/lppaca.h>
+#include	<asm/mmu.h>
+
+register struct paca_struct *local_paca asm("r13");
+
+#if defined(CONFIG_DEBUG_PREEMPT) && defined(CONFIG_SMP)
+extern unsigned int debug_smp_processor_id(void); /* from linux/smp.h */
+/*
+ * Add standard checks that preemption cannot occur when using get_paca():
+ * otherwise the paca_struct it points to may be the wrong one just after.
+ */
+#define get_paca()	((void) debug_smp_processor_id(), local_paca)
+#else
+#define get_paca()	local_paca
+#endif
+
+#define get_lppaca()	(get_paca()->lppaca_ptr)
+#define get_slb_shadow()	(get_paca()->slb_shadow_ptr)
+
+struct task_struct;
+
+/*
+ * Defines the layout of the paca.
+ *
+ * This structure is not directly accessed by firmware or the service
+ * processor.
+ */
+struct paca_struct {
+	/*
+	 * Because hw_cpu_id, unlike other paca fields, is accessed
+	 * routinely from other CPUs (from the IRQ code), we stick to
+	 * read-only (after boot) fields in the first cacheline to
+	 * avoid cacheline bouncing.
+	 */
+
+	struct lppaca *lppaca_ptr;	/* Pointer to LpPaca for PLIC */
+
+	/*
+	 * MAGIC: the spinlock functions in arch/powerpc/lib/locks.c 
+	 * load lock_token and paca_index with a single lwz
+	 * instruction.  They must travel together and be properly
+	 * aligned.
+	 */
+	u16 lock_token;			/* Constant 0x8000, used in locks */
+	u16 paca_index;			/* Logical processor number */
+
+	u64 kernel_toc;			/* Kernel TOC address */
+	u64 stab_real;			/* Absolute address of segment table */
+	u64 stab_addr;			/* Virtual address of segment table */
+	void *emergency_sp;		/* pointer to emergency stack */
+	u64 data_offset;		/* per cpu data offset */
+	s16 hw_cpu_id;			/* Physical processor number */
+	u8 cpu_start;			/* At startup, processor spins until */
+					/* this becomes non-zero. */
+	struct slb_shadow *slb_shadow_ptr;
+
+	/*
+	 * Now, starting in cacheline 2, the exception save areas
+	 */
+	/* used for most interrupts/exceptions */
+	u64 exgen[10] __attribute__((aligned(0x80)));
+	u64 exmc[10];		/* used for machine checks */
+	u64 exslb[10];		/* used for SLB/segment table misses
+ 				 * on the linear mapping */
+
+	mm_context_t context;
+	u16 vmalloc_sllp;
+	u16 slb_cache_ptr;
+	u16 slb_cache[SLB_CACHE_ENTRIES];
+
+	/*
+	 * then miscellaneous read-write fields
+	 */
+	struct task_struct *__current;	/* Pointer to current */
+	u64 kstack;			/* Saved Kernel stack addr */
+	u64 stab_rr;			/* stab/slb round-robin counter */
+	u64 saved_r1;			/* r1 save for RTAS calls */
+	u64 saved_msr;			/* MSR saved here by enter_rtas */
+	u16 trap_save;			/* Used when bad stack is encountered */
+	u8 soft_enabled;		/* irq soft-enable flag */
+	u8 hard_enabled;		/* set if irqs are enabled in MSR */
+	u8 io_sync;			/* writel() needs spin_unlock sync */
+
+	/* Stuff for accurate time accounting */
+	u64 user_time;			/* accumulated usermode TB ticks */
+	u64 system_time;		/* accumulated system TB ticks */
+	u64 startpurr;			/* PURR/TB value snapshot */
+	u64 startspurr;			/* SPURR value snapshot */
+};
+
+extern struct paca_struct paca[];
+extern void initialise_pacas(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PACA_H */
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
new file mode 100644
index 000000000000..e088545cb3f5
--- /dev/null
+++ b/arch/powerpc/include/asm/page.h
@@ -0,0 +1,225 @@
+#ifndef _ASM_POWERPC_PAGE_H
+#define _ASM_POWERPC_PAGE_H
+
+/*
+ * Copyright (C) 2001,2005 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/asm-compat.h>
+#include <asm/kdump.h>
+#include <asm/types.h>
+
+/*
+ * On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software
+ * page size. When using 64K pages however, whether we are really supporting
+ * 64K pages in HW or not is irrelevant to those definitions.
+ */
+#ifdef CONFIG_PPC_64K_PAGES
+#define PAGE_SHIFT		16
+#else
+#define PAGE_SHIFT		12
+#endif
+
+#define PAGE_SIZE		(ASM_CONST(1) << PAGE_SHIFT)
+
+/* We do define AT_SYSINFO_EHDR but don't use the gate mechanism */
+#define __HAVE_ARCH_GATE_AREA		1
+
+/*
+ * Subtle: (1 << PAGE_SHIFT) is an int, not an unsigned long. So if we
+ * assign PAGE_MASK to a larger type it gets extended the way we want
+ * (i.e. with 1s in the high bits)
+ */
+#define PAGE_MASK      (~((1 << PAGE_SHIFT) - 1))
+
+/*
+ * KERNELBASE is the virtual address of the start of the kernel, it's often
+ * the same as PAGE_OFFSET, but _might not be_.
+ *
+ * The kdump dump kernel is one example where KERNELBASE != PAGE_OFFSET.
+ *
+ * PAGE_OFFSET is the virtual address of the start of lowmem.
+ *
+ * PHYSICAL_START is the physical address of the start of the kernel.
+ *
+ * MEMORY_START is the physical address of the start of lowmem.
+ *
+ * KERNELBASE, PAGE_OFFSET, and PHYSICAL_START are all configurable on
+ * ppc32 and based on how they are set we determine MEMORY_START.
+ *
+ * For the linear mapping the following equation should be true:
+ * KERNELBASE - PAGE_OFFSET = PHYSICAL_START - MEMORY_START
+ *
+ * Also, KERNELBASE >= PAGE_OFFSET and PHYSICAL_START >= MEMORY_START
+ *
+ * There are two was to determine a physical address from a virtual one:
+ * va = pa + PAGE_OFFSET - MEMORY_START
+ * va = pa + KERNELBASE - PHYSICAL_START
+ *
+ * If you want to know something's offset from the start of the kernel you
+ * should subtract KERNELBASE.
+ *
+ * If you want to test if something's a kernel address, use is_kernel_addr().
+ */
+
+#define KERNELBASE      ASM_CONST(CONFIG_KERNEL_START)
+#define PAGE_OFFSET	ASM_CONST(CONFIG_PAGE_OFFSET)
+#define LOAD_OFFSET	ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START))
+
+#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_FLATMEM)
+#ifndef __ASSEMBLY__
+extern phys_addr_t memstart_addr;
+extern phys_addr_t kernstart_addr;
+#endif
+#define PHYSICAL_START	kernstart_addr
+#define MEMORY_START	memstart_addr
+#else
+#define PHYSICAL_START	ASM_CONST(CONFIG_PHYSICAL_START)
+#define MEMORY_START	(PHYSICAL_START + PAGE_OFFSET - KERNELBASE)
+#endif
+
+#ifdef CONFIG_FLATMEM
+#define ARCH_PFN_OFFSET		(MEMORY_START >> PAGE_SHIFT)
+#define pfn_valid(pfn)		((pfn) >= ARCH_PFN_OFFSET && (pfn) < (ARCH_PFN_OFFSET + max_mapnr))
+#endif
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define __va(x) ((void *)((unsigned long)(x) - PHYSICAL_START + KERNELBASE))
+#define __pa(x) ((unsigned long)(x) + PHYSICAL_START - KERNELBASE)
+
+/*
+ * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI,
+ * and needs to be executable.  This means the whole heap ends
+ * up being executable.
+ */
+#define VM_DATA_DEFAULT_FLAGS32	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#define VM_DATA_DEFAULT_FLAGS64	(VM_READ | VM_WRITE | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#ifdef __powerpc64__
+#include <asm/page_64.h>
+#else
+#include <asm/page_32.h>
+#endif
+
+/* align addr on a size boundary - adjust address up/down if needed */
+#define _ALIGN_UP(addr,size)	(((addr)+((size)-1))&(~((size)-1)))
+#define _ALIGN_DOWN(addr,size)	((addr)&(~((size)-1)))
+
+/* align addr on a size boundary - adjust address up if needed */
+#define _ALIGN(addr,size)     _ALIGN_UP(addr,size)
+
+/*
+ * Don't compare things with KERNELBASE or PAGE_OFFSET to test for
+ * "kernelness", use is_kernel_addr() - it should do what you want.
+ */
+#define is_kernel_addr(x)	((x) >= PAGE_OFFSET)
+
+#ifndef __ASSEMBLY__
+
+#undef STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/* These are used to make use of C type-checking. */
+
+/* PTE level */
+typedef struct { pte_basic_t pte; } pte_t;
+#define pte_val(x)	((x).pte)
+#define __pte(x)	((pte_t) { (x) })
+
+/* 64k pages additionally define a bigger "real PTE" type that gathers
+ * the "second half" part of the PTE for pseudo 64k pages
+ */
+#ifdef CONFIG_PPC_64K_PAGES
+typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
+#else
+typedef struct { pte_t pte; } real_pte_t;
+#endif
+
+/* PMD level */
+#ifdef CONFIG_PPC64
+typedef struct { unsigned long pmd; } pmd_t;
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x)	((pmd_t) { (x) })
+
+/* PUD level exusts only on 4k pages */
+#ifndef CONFIG_PPC_64K_PAGES
+typedef struct { unsigned long pud; } pud_t;
+#define pud_val(x)	((x).pud)
+#define __pud(x)	((pud_t) { (x) })
+#endif /* !CONFIG_PPC_64K_PAGES */
+#endif /* CONFIG_PPC64 */
+
+/* PGD level */
+typedef struct { unsigned long pgd; } pgd_t;
+#define pgd_val(x)	((x).pgd)
+#define __pgd(x)	((pgd_t) { (x) })
+
+/* Page protection bits */
+typedef struct { unsigned long pgprot; } pgprot_t;
+#define pgprot_val(x)	((x).pgprot)
+#define __pgprot(x)	((pgprot_t) { (x) })
+
+#else
+
+/*
+ * .. while these make it easier on the compiler
+ */
+
+typedef pte_basic_t pte_t;
+#define pte_val(x)	(x)
+#define __pte(x)	(x)
+
+#ifdef CONFIG_PPC_64K_PAGES
+typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
+#else
+typedef unsigned long real_pte_t;
+#endif
+
+
+#ifdef CONFIG_PPC64
+typedef unsigned long pmd_t;
+#define pmd_val(x)	(x)
+#define __pmd(x)	(x)
+
+#ifndef CONFIG_PPC_64K_PAGES
+typedef unsigned long pud_t;
+#define pud_val(x)	(x)
+#define __pud(x)	(x)
+#endif /* !CONFIG_PPC_64K_PAGES */
+#endif /* CONFIG_PPC64 */
+
+typedef unsigned long pgd_t;
+#define pgd_val(x)	(x)
+#define pgprot_val(x)	(x)
+
+typedef unsigned long pgprot_t;
+#define __pgd(x)	(x)
+#define __pgprot(x)	(x)
+
+#endif
+
+struct page;
+extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
+extern void copy_user_page(void *to, void *from, unsigned long vaddr,
+		struct page *p);
+extern int page_is_ram(unsigned long pfn);
+
+struct vm_area_struct;
+
+typedef struct page *pgtable_t;
+
+#include <asm-generic/memory_model.h>
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PAGE_H */
diff --git a/arch/powerpc/include/asm/page_32.h b/arch/powerpc/include/asm/page_32.h
new file mode 100644
index 000000000000..ebfae530a379
--- /dev/null
+++ b/arch/powerpc/include/asm/page_32.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_POWERPC_PAGE_32_H
+#define _ASM_POWERPC_PAGE_32_H
+
+#if defined(CONFIG_PHYSICAL_ALIGN) && (CONFIG_PHYSICAL_START != 0)
+#if (CONFIG_PHYSICAL_START % CONFIG_PHYSICAL_ALIGN) != 0
+#error "CONFIG_PHYSICAL_START must be a multiple of CONFIG_PHYSICAL_ALIGN"
+#endif
+#endif
+
+#define VM_DATA_DEFAULT_FLAGS	VM_DATA_DEFAULT_FLAGS32
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+#endif
+
+#ifndef __ASSEMBLY__
+/*
+ * The basic type of a PTE - 64 bits for those CPUs with > 32 bit
+ * physical addressing.  For now this just the IBM PPC440.
+ */
+#ifdef CONFIG_PTE_64BIT
+typedef unsigned long long pte_basic_t;
+#define PTE_SHIFT	(PAGE_SHIFT - 3)	/* 512 ptes per page */
+#else
+typedef unsigned long pte_basic_t;
+#define PTE_SHIFT	(PAGE_SHIFT - 2)	/* 1024 ptes per page */
+#endif
+
+struct page;
+extern void clear_pages(void *page, int order);
+static inline void clear_page(void *page) { clear_pages(page, 0); }
+extern void copy_page(void *to, void *from);
+
+#include <asm-generic/page.h>
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PAGE_32_H */
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
new file mode 100644
index 000000000000..043bfdfe4f73
--- /dev/null
+++ b/arch/powerpc/include/asm/page_64.h
@@ -0,0 +1,185 @@
+#ifndef _ASM_POWERPC_PAGE_64_H
+#define _ASM_POWERPC_PAGE_64_H
+
+/*
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * We always define HW_PAGE_SHIFT to 12 as use of 64K pages remains Linux
+ * specific, every notion of page number shared with the firmware, TCEs,
+ * iommu, etc... still uses a page size of 4K.
+ */
+#define HW_PAGE_SHIFT		12
+#define HW_PAGE_SIZE		(ASM_CONST(1) << HW_PAGE_SHIFT)
+#define HW_PAGE_MASK		(~(HW_PAGE_SIZE-1))
+
+/*
+ * PAGE_FACTOR is the number of bits factor between PAGE_SHIFT and
+ * HW_PAGE_SHIFT, that is 4K pages.
+ */
+#define PAGE_FACTOR		(PAGE_SHIFT - HW_PAGE_SHIFT)
+
+/* Segment size; normal 256M segments */
+#define SID_SHIFT		28
+#define SID_MASK		ASM_CONST(0xfffffffff)
+#define ESID_MASK		0xfffffffff0000000UL
+#define GET_ESID(x)		(((x) >> SID_SHIFT) & SID_MASK)
+
+/* 1T segments */
+#define SID_SHIFT_1T		40
+#define SID_MASK_1T		0xffffffUL
+#define ESID_MASK_1T		0xffffff0000000000UL
+#define GET_ESID_1T(x)		(((x) >> SID_SHIFT_1T) & SID_MASK_1T)
+
+#ifndef __ASSEMBLY__
+#include <asm/cache.h>
+
+typedef unsigned long pte_basic_t;
+
+static __inline__ void clear_page(void *addr)
+{
+	unsigned long lines, line_size;
+
+	line_size = ppc64_caches.dline_size;
+	lines = ppc64_caches.dlines_per_page;
+
+	__asm__ __volatile__(
+	"mtctr	%1	# clear_page\n\
+1:      dcbz	0,%0\n\
+	add	%0,%0,%3\n\
+	bdnz+	1b"
+        : "=r" (addr)
+        : "r" (lines), "0" (addr), "r" (line_size)
+	: "ctr", "memory");
+}
+
+extern void copy_4K_page(void *to, void *from);
+
+#ifdef CONFIG_PPC_64K_PAGES
+static inline void copy_page(void *to, void *from)
+{
+	unsigned int i;
+	for (i=0; i < (1 << (PAGE_SHIFT - 12)); i++) {
+		copy_4K_page(to, from);
+		to += 4096;
+		from += 4096;
+	}
+}
+#else /* CONFIG_PPC_64K_PAGES */
+static inline void copy_page(void *to, void *from)
+{
+	copy_4K_page(to, from);
+}
+#endif /* CONFIG_PPC_64K_PAGES */
+
+/* Log 2 of page table size */
+extern u64 ppc64_pft_size;
+
+/* Large pages size */
+#ifdef CONFIG_HUGETLB_PAGE
+extern unsigned int HPAGE_SHIFT;
+#else
+#define HPAGE_SHIFT PAGE_SHIFT
+#endif
+#define HPAGE_SIZE		((1UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+#define HUGE_MAX_HSTATE		3
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_PPC_MM_SLICES
+
+#define SLICE_LOW_SHIFT		28
+#define SLICE_HIGH_SHIFT	40
+
+#define SLICE_LOW_TOP		(0x100000000ul)
+#define SLICE_NUM_LOW		(SLICE_LOW_TOP >> SLICE_LOW_SHIFT)
+#define SLICE_NUM_HIGH		(PGTABLE_RANGE >> SLICE_HIGH_SHIFT)
+
+#define GET_LOW_SLICE_INDEX(addr)	((addr) >> SLICE_LOW_SHIFT)
+#define GET_HIGH_SLICE_INDEX(addr)	((addr) >> SLICE_HIGH_SHIFT)
+
+#ifndef __ASSEMBLY__
+
+struct slice_mask {
+	u16 low_slices;
+	u16 high_slices;
+};
+
+struct mm_struct;
+
+extern unsigned long slice_get_unmapped_area(unsigned long addr,
+					     unsigned long len,
+					     unsigned long flags,
+					     unsigned int psize,
+					     int topdown,
+					     int use_cache);
+
+extern unsigned int get_slice_psize(struct mm_struct *mm,
+				    unsigned long addr);
+
+extern void slice_init_context(struct mm_struct *mm, unsigned int psize);
+extern void slice_set_user_psize(struct mm_struct *mm, unsigned int psize);
+extern void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
+				  unsigned long len, unsigned int psize);
+
+#define slice_mm_new_context(mm)	((mm)->context.id == 0)
+
+#endif /* __ASSEMBLY__ */
+#else
+#define slice_init()
+#define get_slice_psize(mm, addr)	((mm)->context.user_psize)
+#define slice_set_user_psize(mm, psize)		\
+do {						\
+	(mm)->context.user_psize = (psize);	\
+	(mm)->context.sllp = SLB_VSID_USER | mmu_psize_defs[(psize)].sllp; \
+} while (0)
+#define slice_set_range_psize(mm, start, len, psize)	\
+	slice_set_user_psize((mm), (psize))
+#define slice_mm_new_context(mm)	1
+#endif /* CONFIG_PPC_MM_SLICES */
+
+#ifdef CONFIG_HUGETLB_PAGE
+
+#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+
+#endif /* !CONFIG_HUGETLB_PAGE */
+
+#ifdef MODULE
+#define __page_aligned __attribute__((__aligned__(PAGE_SIZE)))
+#else
+#define __page_aligned \
+	__attribute__((__aligned__(PAGE_SIZE), \
+		__section__(".data.page_aligned")))
+#endif
+
+#define VM_DATA_DEFAULT_FLAGS \
+	(test_thread_flag(TIF_32BIT) ? \
+	 VM_DATA_DEFAULT_FLAGS32 : VM_DATA_DEFAULT_FLAGS64)
+
+/*
+ * This is the default if a program doesn't have a PT_GNU_STACK
+ * program header entry. The PPC64 ELF ABI has a non executable stack
+ * stack by default, so in the absense of a PT_GNU_STACK program header
+ * we turn execute permission off.
+ */
+#define VM_STACK_DEFAULT_FLAGS32	(VM_READ | VM_WRITE | VM_EXEC | \
+					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#define VM_STACK_DEFAULT_FLAGS64	(VM_READ | VM_WRITE | \
+					 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#define VM_STACK_DEFAULT_FLAGS \
+	(test_thread_flag(TIF_32BIT) ? \
+	 VM_STACK_DEFAULT_FLAGS32 : VM_STACK_DEFAULT_FLAGS64)
+
+#include <asm-generic/page.h>
+
+#endif /* _ASM_POWERPC_PAGE_64_H */
diff --git a/arch/powerpc/include/asm/param.h b/arch/powerpc/include/asm/param.h
new file mode 100644
index 000000000000..094f63d4d5ca
--- /dev/null
+++ b/arch/powerpc/include/asm/param.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_POWERPC_PARAM_H
+#define _ASM_POWERPC_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ		CONFIG_HZ	/* internal kernel timer frequency */
+#define USER_HZ		100		/* for user interfaces in "ticks" */
+#define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
+#endif /* __KERNEL__ */
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif	/* _ASM_POWERPC_PARAM_H */
diff --git a/arch/powerpc/include/asm/parport.h b/arch/powerpc/include/asm/parport.h
new file mode 100644
index 000000000000..414c50e2e881
--- /dev/null
+++ b/arch/powerpc/include/asm/parport.h
@@ -0,0 +1,39 @@
+/*
+ * parport.h: platform-specific PC-style parport initialisation
+ *
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+
+#ifndef _ASM_POWERPC_PARPORT_H
+#define _ASM_POWERPC_PARPORT_H
+#ifdef __KERNEL__
+
+#include <asm/prom.h>
+
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+	struct device_node *np;
+	const u32 *prop;
+	u32 io1, io2;
+	int propsize;
+	int count = 0;
+	for (np = NULL; (np = of_find_compatible_node(np,
+						      "parallel",
+						      "pnpPNP,400")) != NULL;) {
+		prop = of_get_property(np, "reg", &propsize);
+		if (!prop || propsize > 6*sizeof(u32))
+			continue;
+		io1 = prop[1]; io2 = prop[2];
+		prop = of_get_property(np, "interrupts", NULL);
+		if (!prop)
+			continue;
+		if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL) != NULL)
+			count++;
+	}
+	return count;
+}
+
+#endif /* __KERNEL__ */
+#endif /* !(_ASM_POWERPC_PARPORT_H) */
diff --git a/arch/powerpc/include/asm/pasemi_dma.h b/arch/powerpc/include/asm/pasemi_dma.h
new file mode 100644
index 000000000000..19fd7933e2d9
--- /dev/null
+++ b/arch/powerpc/include/asm/pasemi_dma.h
@@ -0,0 +1,538 @@
+/*
+ * Copyright (C) 2006-2008 PA Semi, Inc
+ *
+ * Hardware register layout and descriptor formats for the on-board
+ * DMA engine on PA Semi PWRficient. Used by ethernet, function and security
+ * drivers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef ASM_PASEMI_DMA_H
+#define ASM_PASEMI_DMA_H
+
+/* status register layout in IOB region, at 0xfb800000 */
+struct pasdma_status {
+	u64 rx_sta[64];		/* RX channel status */
+	u64 tx_sta[20];		/* TX channel status */
+};
+
+
+/* All these registers live in the PCI configuration space for the DMA PCI
+ * device. Use the normal PCI config access functions for them.
+ */
+enum {
+	PAS_DMA_CAP_TXCH  = 0x44,	/* Transmit Channel Info      */
+	PAS_DMA_CAP_RXCH  = 0x48,	/* Transmit Channel Info      */
+	PAS_DMA_CAP_IFI	  = 0x4c,	/* Interface Info	      */
+	PAS_DMA_COM_TXCMD = 0x100,	/* Transmit Command Register  */
+	PAS_DMA_COM_TXSTA = 0x104,	/* Transmit Status Register   */
+	PAS_DMA_COM_RXCMD = 0x108,	/* Receive Command Register   */
+	PAS_DMA_COM_RXSTA = 0x10c,	/* Receive Status Register    */
+	PAS_DMA_COM_CFG   = 0x114,	/* Common config reg	      */
+	PAS_DMA_TXF_SFLG0 = 0x140,	/* Set flags                  */
+	PAS_DMA_TXF_SFLG1 = 0x144,	/* Set flags                  */
+	PAS_DMA_TXF_CFLG0 = 0x148,	/* Set flags                  */
+	PAS_DMA_TXF_CFLG1 = 0x14c,	/* Set flags                  */
+};
+
+
+#define PAS_DMA_CAP_TXCH_TCHN_M	0x00ff0000 /* # of TX channels */
+#define PAS_DMA_CAP_TXCH_TCHN_S	16
+
+#define PAS_DMA_CAP_RXCH_RCHN_M	0x00ff0000 /* # of RX channels */
+#define PAS_DMA_CAP_RXCH_RCHN_S	16
+
+#define PAS_DMA_CAP_IFI_IOFF_M	0xff000000 /* Cfg reg for intf pointers */
+#define PAS_DMA_CAP_IFI_IOFF_S	24
+#define PAS_DMA_CAP_IFI_NIN_M	0x00ff0000 /* # of interfaces */
+#define PAS_DMA_CAP_IFI_NIN_S	16
+
+#define PAS_DMA_COM_TXCMD_EN	0x00000001 /* enable */
+#define PAS_DMA_COM_TXSTA_ACT	0x00000001 /* active */
+#define PAS_DMA_COM_RXCMD_EN	0x00000001 /* enable */
+#define PAS_DMA_COM_RXSTA_ACT	0x00000001 /* active */
+
+
+/* Per-interface and per-channel registers */
+#define _PAS_DMA_RXINT_STRIDE		0x20
+#define PAS_DMA_RXINT_RCMDSTA(i)	(0x200+(i)*_PAS_DMA_RXINT_STRIDE)
+#define    PAS_DMA_RXINT_RCMDSTA_EN	0x00000001
+#define    PAS_DMA_RXINT_RCMDSTA_ST	0x00000002
+#define    PAS_DMA_RXINT_RCMDSTA_MBT	0x00000008
+#define    PAS_DMA_RXINT_RCMDSTA_MDR	0x00000010
+#define    PAS_DMA_RXINT_RCMDSTA_MOO	0x00000020
+#define    PAS_DMA_RXINT_RCMDSTA_MBP	0x00000040
+#define    PAS_DMA_RXINT_RCMDSTA_BT	0x00000800
+#define    PAS_DMA_RXINT_RCMDSTA_DR	0x00001000
+#define    PAS_DMA_RXINT_RCMDSTA_OO	0x00002000
+#define    PAS_DMA_RXINT_RCMDSTA_BP	0x00004000
+#define    PAS_DMA_RXINT_RCMDSTA_TB	0x00008000
+#define    PAS_DMA_RXINT_RCMDSTA_ACT	0x00010000
+#define    PAS_DMA_RXINT_RCMDSTA_DROPS_M	0xfffe0000
+#define    PAS_DMA_RXINT_RCMDSTA_DROPS_S	17
+#define PAS_DMA_RXINT_CFG(i)		(0x204+(i)*_PAS_DMA_RXINT_STRIDE)
+#define    PAS_DMA_RXINT_CFG_RBP	0x80000000
+#define    PAS_DMA_RXINT_CFG_ITRR	0x40000000
+#define    PAS_DMA_RXINT_CFG_DHL_M	0x07000000
+#define    PAS_DMA_RXINT_CFG_DHL_S	24
+#define    PAS_DMA_RXINT_CFG_DHL(x)	(((x) << PAS_DMA_RXINT_CFG_DHL_S) & \
+					 PAS_DMA_RXINT_CFG_DHL_M)
+#define    PAS_DMA_RXINT_CFG_ITR	0x00400000
+#define    PAS_DMA_RXINT_CFG_LW		0x00200000
+#define    PAS_DMA_RXINT_CFG_L2		0x00100000
+#define    PAS_DMA_RXINT_CFG_HEN	0x00080000
+#define    PAS_DMA_RXINT_CFG_WIF	0x00000002
+#define    PAS_DMA_RXINT_CFG_WIL	0x00000001
+
+#define PAS_DMA_RXINT_INCR(i)		(0x210+(i)*_PAS_DMA_RXINT_STRIDE)
+#define    PAS_DMA_RXINT_INCR_INCR_M	0x0000ffff
+#define    PAS_DMA_RXINT_INCR_INCR_S	0
+#define    PAS_DMA_RXINT_INCR_INCR(x)	((x) & 0x0000ffff)
+#define PAS_DMA_RXINT_BASEL(i)		(0x218+(i)*_PAS_DMA_RXINT_STRIDE)
+#define    PAS_DMA_RXINT_BASEL_BRBL(x)	((x) & ~0x3f)
+#define PAS_DMA_RXINT_BASEU(i)		(0x21c+(i)*_PAS_DMA_RXINT_STRIDE)
+#define    PAS_DMA_RXINT_BASEU_BRBH(x)	((x) & 0xfff)
+#define    PAS_DMA_RXINT_BASEU_SIZ_M	0x3fff0000	/* # of cache lines worth of buffer ring */
+#define    PAS_DMA_RXINT_BASEU_SIZ_S	16		/* 0 = 16K */
+#define    PAS_DMA_RXINT_BASEU_SIZ(x)	(((x) << PAS_DMA_RXINT_BASEU_SIZ_S) & \
+					 PAS_DMA_RXINT_BASEU_SIZ_M)
+
+
+#define _PAS_DMA_TXCHAN_STRIDE	0x20    /* Size per channel		*/
+#define _PAS_DMA_TXCHAN_TCMDSTA	0x300	/* Command / Status		*/
+#define _PAS_DMA_TXCHAN_CFG	0x304	/* Configuration		*/
+#define _PAS_DMA_TXCHAN_DSCRBU	0x308	/* Descriptor BU Allocation	*/
+#define _PAS_DMA_TXCHAN_INCR	0x310	/* Descriptor increment		*/
+#define _PAS_DMA_TXCHAN_CNT	0x314	/* Descriptor count/offset	*/
+#define _PAS_DMA_TXCHAN_BASEL	0x318	/* Descriptor ring base (low)	*/
+#define _PAS_DMA_TXCHAN_BASEU	0x31c	/*			(high)	*/
+#define PAS_DMA_TXCHAN_TCMDSTA(c) (0x300+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define    PAS_DMA_TXCHAN_TCMDSTA_EN	0x00000001	/* Enabled */
+#define    PAS_DMA_TXCHAN_TCMDSTA_ST	0x00000002	/* Stop interface */
+#define    PAS_DMA_TXCHAN_TCMDSTA_ACT	0x00010000	/* Active */
+#define    PAS_DMA_TXCHAN_TCMDSTA_SZ	0x00000800
+#define    PAS_DMA_TXCHAN_TCMDSTA_DB	0x00000400
+#define    PAS_DMA_TXCHAN_TCMDSTA_DE	0x00000200
+#define    PAS_DMA_TXCHAN_TCMDSTA_DA	0x00000100
+#define PAS_DMA_TXCHAN_CFG(c)     (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define    PAS_DMA_TXCHAN_CFG_TY_IFACE	0x00000000	/* Type = interface */
+#define    PAS_DMA_TXCHAN_CFG_TY_COPY	0x00000001	/* Type = copy only */
+#define    PAS_DMA_TXCHAN_CFG_TY_FUNC	0x00000002	/* Type = function */
+#define    PAS_DMA_TXCHAN_CFG_TY_XOR	0x00000003	/* Type = xor only */
+#define    PAS_DMA_TXCHAN_CFG_TATTR_M	0x0000003c
+#define    PAS_DMA_TXCHAN_CFG_TATTR_S	2
+#define    PAS_DMA_TXCHAN_CFG_TATTR(x)	(((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \
+					 PAS_DMA_TXCHAN_CFG_TATTR_M)
+#define    PAS_DMA_TXCHAN_CFG_LPDQ	0x00000800
+#define    PAS_DMA_TXCHAN_CFG_LPSQ	0x00000400
+#define    PAS_DMA_TXCHAN_CFG_WT_M	0x000003c0
+#define    PAS_DMA_TXCHAN_CFG_WT_S	6
+#define    PAS_DMA_TXCHAN_CFG_WT(x)	(((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \
+					 PAS_DMA_TXCHAN_CFG_WT_M)
+#define    PAS_DMA_TXCHAN_CFG_TRD	0x00010000	/* translate data */
+#define    PAS_DMA_TXCHAN_CFG_TRR	0x00008000	/* translate rings */
+#define    PAS_DMA_TXCHAN_CFG_UP	0x00004000	/* update tx descr when sent */
+#define    PAS_DMA_TXCHAN_CFG_CL	0x00002000	/* Clean last line */
+#define    PAS_DMA_TXCHAN_CFG_CF	0x00001000	/* Clean first line */
+#define PAS_DMA_TXCHAN_INCR(c)    (0x310+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define PAS_DMA_TXCHAN_BASEL(c)   (0x318+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define    PAS_DMA_TXCHAN_BASEL_BRBL_M	0xffffffc0
+#define    PAS_DMA_TXCHAN_BASEL_BRBL_S	0
+#define    PAS_DMA_TXCHAN_BASEL_BRBL(x)	(((x) << PAS_DMA_TXCHAN_BASEL_BRBL_S) & \
+					 PAS_DMA_TXCHAN_BASEL_BRBL_M)
+#define PAS_DMA_TXCHAN_BASEU(c)   (0x31c+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define    PAS_DMA_TXCHAN_BASEU_BRBH_M	0x00000fff
+#define    PAS_DMA_TXCHAN_BASEU_BRBH_S	0
+#define    PAS_DMA_TXCHAN_BASEU_BRBH(x)	(((x) << PAS_DMA_TXCHAN_BASEU_BRBH_S) & \
+					 PAS_DMA_TXCHAN_BASEU_BRBH_M)
+/* # of cache lines worth of buffer ring */
+#define    PAS_DMA_TXCHAN_BASEU_SIZ_M	0x3fff0000
+#define    PAS_DMA_TXCHAN_BASEU_SIZ_S	16		/* 0 = 16K */
+#define    PAS_DMA_TXCHAN_BASEU_SIZ(x)	(((x) << PAS_DMA_TXCHAN_BASEU_SIZ_S) & \
+					 PAS_DMA_TXCHAN_BASEU_SIZ_M)
+
+#define _PAS_DMA_RXCHAN_STRIDE	0x20    /* Size per channel		*/
+#define _PAS_DMA_RXCHAN_CCMDSTA	0x800	/* Command / Status		*/
+#define _PAS_DMA_RXCHAN_CFG	0x804	/* Configuration		*/
+#define _PAS_DMA_RXCHAN_INCR	0x810	/* Descriptor increment		*/
+#define _PAS_DMA_RXCHAN_CNT	0x814	/* Descriptor count/offset	*/
+#define _PAS_DMA_RXCHAN_BASEL	0x818	/* Descriptor ring base (low)	*/
+#define _PAS_DMA_RXCHAN_BASEU	0x81c	/*			(high)	*/
+#define PAS_DMA_RXCHAN_CCMDSTA(c) (0x800+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define    PAS_DMA_RXCHAN_CCMDSTA_EN	0x00000001	/* Enabled */
+#define    PAS_DMA_RXCHAN_CCMDSTA_ST	0x00000002	/* Stop interface */
+#define    PAS_DMA_RXCHAN_CCMDSTA_ACT	0x00010000	/* Active */
+#define    PAS_DMA_RXCHAN_CCMDSTA_DU	0x00020000
+#define    PAS_DMA_RXCHAN_CCMDSTA_OD	0x00002000
+#define    PAS_DMA_RXCHAN_CCMDSTA_FD	0x00001000
+#define    PAS_DMA_RXCHAN_CCMDSTA_DT	0x00000800
+#define PAS_DMA_RXCHAN_CFG(c)     (0x804+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define    PAS_DMA_RXCHAN_CFG_CTR	0x00000400
+#define    PAS_DMA_RXCHAN_CFG_HBU_M	0x00000380
+#define    PAS_DMA_RXCHAN_CFG_HBU_S	7
+#define    PAS_DMA_RXCHAN_CFG_HBU(x)	(((x) << PAS_DMA_RXCHAN_CFG_HBU_S) & \
+					 PAS_DMA_RXCHAN_CFG_HBU_M)
+#define PAS_DMA_RXCHAN_INCR(c)    (0x810+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define PAS_DMA_RXCHAN_BASEL(c)   (0x818+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define    PAS_DMA_RXCHAN_BASEL_BRBL_M	0xffffffc0
+#define    PAS_DMA_RXCHAN_BASEL_BRBL_S	0
+#define    PAS_DMA_RXCHAN_BASEL_BRBL(x)	(((x) << PAS_DMA_RXCHAN_BASEL_BRBL_S) & \
+					 PAS_DMA_RXCHAN_BASEL_BRBL_M)
+#define PAS_DMA_RXCHAN_BASEU(c)   (0x81c+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define    PAS_DMA_RXCHAN_BASEU_BRBH_M	0x00000fff
+#define    PAS_DMA_RXCHAN_BASEU_BRBH_S	0
+#define    PAS_DMA_RXCHAN_BASEU_BRBH(x)	(((x) << PAS_DMA_RXCHAN_BASEU_BRBH_S) & \
+					 PAS_DMA_RXCHAN_BASEU_BRBH_M)
+/* # of cache lines worth of buffer ring */
+#define    PAS_DMA_RXCHAN_BASEU_SIZ_M	0x3fff0000
+#define    PAS_DMA_RXCHAN_BASEU_SIZ_S	16		/* 0 = 16K */
+#define    PAS_DMA_RXCHAN_BASEU_SIZ(x)	(((x) << PAS_DMA_RXCHAN_BASEU_SIZ_S) & \
+					 PAS_DMA_RXCHAN_BASEU_SIZ_M)
+
+#define    PAS_STATUS_PCNT_M		0x000000000000ffffull
+#define    PAS_STATUS_PCNT_S		0
+#define    PAS_STATUS_DCNT_M		0x00000000ffff0000ull
+#define    PAS_STATUS_DCNT_S		16
+#define    PAS_STATUS_BPCNT_M		0x0000ffff00000000ull
+#define    PAS_STATUS_BPCNT_S		32
+#define    PAS_STATUS_CAUSE_M		0xf000000000000000ull
+#define    PAS_STATUS_TIMER		0x1000000000000000ull
+#define    PAS_STATUS_ERROR		0x2000000000000000ull
+#define    PAS_STATUS_SOFT		0x4000000000000000ull
+#define    PAS_STATUS_INT		0x8000000000000000ull
+
+#define PAS_IOB_COM_PKTHDRCNT		0x120
+#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR1_M	0x0fff0000
+#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR1_S	16
+#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR0_M	0x00000fff
+#define    PAS_IOB_COM_PKTHDRCNT_PKTHDR0_S	0
+
+#define PAS_IOB_DMA_RXCH_CFG(i)		(0x1100 + (i)*4)
+#define    PAS_IOB_DMA_RXCH_CFG_CNTTH_M		0x00000fff
+#define    PAS_IOB_DMA_RXCH_CFG_CNTTH_S		0
+#define    PAS_IOB_DMA_RXCH_CFG_CNTTH(x)	(((x) << PAS_IOB_DMA_RXCH_CFG_CNTTH_S) & \
+						 PAS_IOB_DMA_RXCH_CFG_CNTTH_M)
+#define PAS_IOB_DMA_TXCH_CFG(i)		(0x1200 + (i)*4)
+#define    PAS_IOB_DMA_TXCH_CFG_CNTTH_M		0x00000fff
+#define    PAS_IOB_DMA_TXCH_CFG_CNTTH_S		0
+#define    PAS_IOB_DMA_TXCH_CFG_CNTTH(x)	(((x) << PAS_IOB_DMA_TXCH_CFG_CNTTH_S) & \
+						 PAS_IOB_DMA_TXCH_CFG_CNTTH_M)
+#define PAS_IOB_DMA_RXCH_STAT(i)	(0x1300 + (i)*4)
+#define    PAS_IOB_DMA_RXCH_STAT_INTGEN	0x00001000
+#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL_M	0x00000fff
+#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL_S	0
+#define    PAS_IOB_DMA_RXCH_STAT_CNTDEL(x)	(((x) << PAS_IOB_DMA_RXCH_STAT_CNTDEL_S) &\
+						 PAS_IOB_DMA_RXCH_STAT_CNTDEL_M)
+#define PAS_IOB_DMA_TXCH_STAT(i)	(0x1400 + (i)*4)
+#define    PAS_IOB_DMA_TXCH_STAT_INTGEN	0x00001000
+#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL_M	0x00000fff
+#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL_S	0
+#define    PAS_IOB_DMA_TXCH_STAT_CNTDEL(x)	(((x) << PAS_IOB_DMA_TXCH_STAT_CNTDEL_S) &\
+						 PAS_IOB_DMA_TXCH_STAT_CNTDEL_M)
+#define PAS_IOB_DMA_RXCH_RESET(i)	(0x1500 + (i)*4)
+#define    PAS_IOB_DMA_RXCH_RESET_PCNT_M	0xffff0000
+#define    PAS_IOB_DMA_RXCH_RESET_PCNT_S	16
+#define    PAS_IOB_DMA_RXCH_RESET_PCNT(x)	(((x) << PAS_IOB_DMA_RXCH_RESET_PCNT_S) & \
+						 PAS_IOB_DMA_RXCH_RESET_PCNT_M)
+#define    PAS_IOB_DMA_RXCH_RESET_PCNTRST	0x00000020
+#define    PAS_IOB_DMA_RXCH_RESET_DCNTRST	0x00000010
+#define    PAS_IOB_DMA_RXCH_RESET_TINTC		0x00000008
+#define    PAS_IOB_DMA_RXCH_RESET_DINTC		0x00000004
+#define    PAS_IOB_DMA_RXCH_RESET_SINTC		0x00000002
+#define    PAS_IOB_DMA_RXCH_RESET_PINTC		0x00000001
+#define PAS_IOB_DMA_TXCH_RESET(i)	(0x1600 + (i)*4)
+#define    PAS_IOB_DMA_TXCH_RESET_PCNT_M	0xffff0000
+#define    PAS_IOB_DMA_TXCH_RESET_PCNT_S	16
+#define    PAS_IOB_DMA_TXCH_RESET_PCNT(x)	(((x) << PAS_IOB_DMA_TXCH_RESET_PCNT_S) & \
+						 PAS_IOB_DMA_TXCH_RESET_PCNT_M)
+#define    PAS_IOB_DMA_TXCH_RESET_PCNTRST	0x00000020
+#define    PAS_IOB_DMA_TXCH_RESET_DCNTRST	0x00000010
+#define    PAS_IOB_DMA_TXCH_RESET_TINTC		0x00000008
+#define    PAS_IOB_DMA_TXCH_RESET_DINTC		0x00000004
+#define    PAS_IOB_DMA_TXCH_RESET_SINTC		0x00000002
+#define    PAS_IOB_DMA_TXCH_RESET_PINTC		0x00000001
+
+#define PAS_IOB_DMA_COM_TIMEOUTCFG		0x1700
+#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M	0x00ffffff
+#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S	0
+#define    PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(x)	(((x) << PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S) & \
+						 PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M)
+
+/* Transmit descriptor fields */
+#define	XCT_MACTX_T		0x8000000000000000ull
+#define	XCT_MACTX_ST		0x4000000000000000ull
+#define XCT_MACTX_NORES		0x0000000000000000ull
+#define XCT_MACTX_8BRES		0x1000000000000000ull
+#define XCT_MACTX_24BRES	0x2000000000000000ull
+#define XCT_MACTX_40BRES	0x3000000000000000ull
+#define XCT_MACTX_I		0x0800000000000000ull
+#define XCT_MACTX_O		0x0400000000000000ull
+#define XCT_MACTX_E		0x0200000000000000ull
+#define XCT_MACTX_VLAN_M	0x0180000000000000ull
+#define XCT_MACTX_VLAN_NOP	0x0000000000000000ull
+#define XCT_MACTX_VLAN_REMOVE	0x0080000000000000ull
+#define XCT_MACTX_VLAN_INSERT   0x0100000000000000ull
+#define XCT_MACTX_VLAN_REPLACE  0x0180000000000000ull
+#define XCT_MACTX_CRC_M		0x0060000000000000ull
+#define XCT_MACTX_CRC_NOP	0x0000000000000000ull
+#define XCT_MACTX_CRC_INSERT	0x0020000000000000ull
+#define XCT_MACTX_CRC_PAD	0x0040000000000000ull
+#define XCT_MACTX_CRC_REPLACE	0x0060000000000000ull
+#define XCT_MACTX_SS		0x0010000000000000ull
+#define XCT_MACTX_LLEN_M	0x00007fff00000000ull
+#define XCT_MACTX_LLEN_S	32ull
+#define XCT_MACTX_LLEN(x)	((((long)(x)) << XCT_MACTX_LLEN_S) & \
+				 XCT_MACTX_LLEN_M)
+#define XCT_MACTX_IPH_M		0x00000000f8000000ull
+#define XCT_MACTX_IPH_S		27ull
+#define XCT_MACTX_IPH(x)	((((long)(x)) << XCT_MACTX_IPH_S) & \
+				 XCT_MACTX_IPH_M)
+#define XCT_MACTX_IPO_M		0x0000000007c00000ull
+#define XCT_MACTX_IPO_S		22ull
+#define XCT_MACTX_IPO(x)	((((long)(x)) << XCT_MACTX_IPO_S) & \
+				 XCT_MACTX_IPO_M)
+#define XCT_MACTX_CSUM_M	0x0000000000000060ull
+#define XCT_MACTX_CSUM_NOP	0x0000000000000000ull
+#define XCT_MACTX_CSUM_TCP	0x0000000000000040ull
+#define XCT_MACTX_CSUM_UDP	0x0000000000000060ull
+#define XCT_MACTX_V6		0x0000000000000010ull
+#define XCT_MACTX_C		0x0000000000000004ull
+#define XCT_MACTX_AL2		0x0000000000000002ull
+
+/* Receive descriptor fields */
+#define	XCT_MACRX_T		0x8000000000000000ull
+#define	XCT_MACRX_ST		0x4000000000000000ull
+#define XCT_MACRX_RR_M		0x3000000000000000ull
+#define XCT_MACRX_RR_NORES	0x0000000000000000ull
+#define XCT_MACRX_RR_8BRES	0x1000000000000000ull
+#define XCT_MACRX_O		0x0400000000000000ull
+#define XCT_MACRX_E		0x0200000000000000ull
+#define XCT_MACRX_FF		0x0100000000000000ull
+#define XCT_MACRX_PF		0x0080000000000000ull
+#define XCT_MACRX_OB		0x0040000000000000ull
+#define XCT_MACRX_OD		0x0020000000000000ull
+#define XCT_MACRX_FS		0x0010000000000000ull
+#define XCT_MACRX_NB_M		0x000fc00000000000ull
+#define XCT_MACRX_NB_S		46ULL
+#define XCT_MACRX_NB(x)		((((long)(x)) << XCT_MACRX_NB_S) & \
+				 XCT_MACRX_NB_M)
+#define XCT_MACRX_LLEN_M	0x00003fff00000000ull
+#define XCT_MACRX_LLEN_S	32ULL
+#define XCT_MACRX_LLEN(x)	((((long)(x)) << XCT_MACRX_LLEN_S) & \
+				 XCT_MACRX_LLEN_M)
+#define XCT_MACRX_CRC		0x0000000080000000ull
+#define XCT_MACRX_LEN_M		0x0000000060000000ull
+#define XCT_MACRX_LEN_TOOSHORT	0x0000000020000000ull
+#define XCT_MACRX_LEN_BELOWMIN	0x0000000040000000ull
+#define XCT_MACRX_LEN_TRUNC	0x0000000060000000ull
+#define XCT_MACRX_CAST_M	0x0000000018000000ull
+#define XCT_MACRX_CAST_UNI	0x0000000000000000ull
+#define XCT_MACRX_CAST_MULTI	0x0000000008000000ull
+#define XCT_MACRX_CAST_BROAD	0x0000000010000000ull
+#define XCT_MACRX_CAST_PAUSE	0x0000000018000000ull
+#define XCT_MACRX_VLC_M		0x0000000006000000ull
+#define XCT_MACRX_FM		0x0000000001000000ull
+#define XCT_MACRX_HTY_M		0x0000000000c00000ull
+#define XCT_MACRX_HTY_IPV4_OK	0x0000000000000000ull
+#define XCT_MACRX_HTY_IPV6 	0x0000000000400000ull
+#define XCT_MACRX_HTY_IPV4_BAD	0x0000000000800000ull
+#define XCT_MACRX_HTY_NONIP	0x0000000000c00000ull
+#define XCT_MACRX_IPP_M		0x00000000003f0000ull
+#define XCT_MACRX_IPP_S		16
+#define XCT_MACRX_CSUM_M	0x000000000000ffffull
+#define XCT_MACRX_CSUM_S	0
+
+#define XCT_PTR_T		0x8000000000000000ull
+#define XCT_PTR_LEN_M		0x7ffff00000000000ull
+#define XCT_PTR_LEN_S		44
+#define XCT_PTR_LEN(x)		((((long)(x)) << XCT_PTR_LEN_S) & \
+				 XCT_PTR_LEN_M)
+#define XCT_PTR_ADDR_M		0x00000fffffffffffull
+#define XCT_PTR_ADDR_S		0
+#define XCT_PTR_ADDR(x)		((((long)(x)) << XCT_PTR_ADDR_S) & \
+				 XCT_PTR_ADDR_M)
+
+/* Receive interface 8byte result fields */
+#define XCT_RXRES_8B_L4O_M	0xff00000000000000ull
+#define XCT_RXRES_8B_L4O_S	56
+#define XCT_RXRES_8B_RULE_M	0x00ffff0000000000ull
+#define XCT_RXRES_8B_RULE_S	40
+#define XCT_RXRES_8B_EVAL_M	0x000000ffff000000ull
+#define XCT_RXRES_8B_EVAL_S	24
+#define XCT_RXRES_8B_HTYPE_M	0x0000000000f00000ull
+#define XCT_RXRES_8B_HASH_M	0x00000000000fffffull
+#define XCT_RXRES_8B_HASH_S	0
+
+/* Receive interface buffer fields */
+#define XCT_RXB_LEN_M		0x0ffff00000000000ull
+#define XCT_RXB_LEN_S		44
+#define XCT_RXB_LEN(x)		((((long)(x)) << XCT_RXB_LEN_S) & \
+				 XCT_RXB_LEN_M)
+#define XCT_RXB_ADDR_M		0x00000fffffffffffull
+#define XCT_RXB_ADDR_S		0
+#define XCT_RXB_ADDR(x)		((((long)(x)) << XCT_RXB_ADDR_S) & \
+				 XCT_RXB_ADDR_M)
+
+/* Copy descriptor fields */
+#define XCT_COPY_T		0x8000000000000000ull
+#define XCT_COPY_ST		0x4000000000000000ull
+#define XCT_COPY_RR_M		0x3000000000000000ull
+#define XCT_COPY_RR_NORES	0x0000000000000000ull
+#define XCT_COPY_RR_8BRES	0x1000000000000000ull
+#define XCT_COPY_RR_24BRES	0x2000000000000000ull
+#define XCT_COPY_RR_40BRES	0x3000000000000000ull
+#define XCT_COPY_I		0x0800000000000000ull
+#define XCT_COPY_O		0x0400000000000000ull
+#define XCT_COPY_E		0x0200000000000000ull
+#define XCT_COPY_STY_ZERO	0x01c0000000000000ull
+#define XCT_COPY_DTY_PREF	0x0038000000000000ull
+#define XCT_COPY_LLEN_M		0x0007ffff00000000ull
+#define XCT_COPY_LLEN_S		32
+#define XCT_COPY_LLEN(x)	((((long)(x)) << XCT_COPY_LLEN_S) & \
+				 XCT_COPY_LLEN_M)
+#define XCT_COPY_SE		0x0000000000000001ull
+
+/* Function descriptor fields */
+#define XCT_FUN_T		0x8000000000000000ull
+#define XCT_FUN_ST		0x4000000000000000ull
+#define XCT_FUN_RR_M		0x3000000000000000ull
+#define XCT_FUN_RR_NORES	0x0000000000000000ull
+#define XCT_FUN_RR_8BRES	0x1000000000000000ull
+#define XCT_FUN_RR_24BRES	0x2000000000000000ull
+#define XCT_FUN_RR_40BRES	0x3000000000000000ull
+#define XCT_FUN_I		0x0800000000000000ull
+#define XCT_FUN_O		0x0400000000000000ull
+#define XCT_FUN_E		0x0200000000000000ull
+#define XCT_FUN_FUN_M		0x01c0000000000000ull
+#define XCT_FUN_FUN_S		54
+#define XCT_FUN_FUN(x)		((((long)(x)) << XCT_FUN_FUN_S) & XCT_FUN_FUN_M)
+#define XCT_FUN_CRM_M		0x0038000000000000ull
+#define XCT_FUN_CRM_NOP		0x0000000000000000ull
+#define XCT_FUN_CRM_SIG		0x0008000000000000ull
+#define XCT_FUN_LLEN_M		0x0007ffff00000000ull
+#define XCT_FUN_LLEN_S		32
+#define XCT_FUN_LLEN(x)		((((long)(x)) << XCT_FUN_LLEN_S) & XCT_FUN_LLEN_M)
+#define XCT_FUN_SHL_M		0x00000000f8000000ull
+#define XCT_FUN_SHL_S		27
+#define XCT_FUN_SHL(x)		((((long)(x)) << XCT_FUN_SHL_S) & XCT_FUN_SHL_M)
+#define XCT_FUN_CHL_M		0x0000000007c00000ull
+#define XCT_FUN_HSZ_M		0x00000000003c0000ull
+#define XCT_FUN_ALG_M		0x0000000000038000ull
+#define XCT_FUN_HP		0x0000000000004000ull
+#define XCT_FUN_BCM_M		0x0000000000003800ull
+#define XCT_FUN_BCP_M		0x0000000000000600ull
+#define XCT_FUN_SIG_M		0x00000000000001f0ull
+#define XCT_FUN_SIG_TCP4	0x0000000000000140ull
+#define XCT_FUN_SIG_TCP6	0x0000000000000150ull
+#define XCT_FUN_SIG_UDP4	0x0000000000000160ull
+#define XCT_FUN_SIG_UDP6	0x0000000000000170ull
+#define XCT_FUN_A		0x0000000000000008ull
+#define XCT_FUN_C		0x0000000000000004ull
+#define XCT_FUN_AL2		0x0000000000000002ull
+#define XCT_FUN_SE		0x0000000000000001ull
+
+/* Function descriptor 8byte result fields */
+#define XCT_FUNRES_8B_CS_M	0x0000ffff00000000ull
+#define XCT_FUNRES_8B_CS_S	32
+#define XCT_FUNRES_8B_CRC_M	0x00000000ffffffffull
+#define XCT_FUNRES_8B_CRC_S	0
+
+/* Control descriptor fields */
+#define CTRL_CMD_T		0x8000000000000000ull
+#define CTRL_CMD_META_EVT	0x2000000000000000ull
+#define CTRL_CMD_O		0x0400000000000000ull
+#define CTRL_CMD_ETYPE_M	0x0038000000000000ull
+#define CTRL_CMD_ETYPE_EXT	0x0000000000000000ull
+#define CTRL_CMD_ETYPE_WSET	0x0020000000000000ull
+#define CTRL_CMD_ETYPE_WCLR	0x0028000000000000ull
+#define CTRL_CMD_ETYPE_SET	0x0030000000000000ull
+#define CTRL_CMD_ETYPE_CLR	0x0038000000000000ull
+#define CTRL_CMD_REG_M		0x000000000000007full
+#define CTRL_CMD_REG_S		0
+#define CTRL_CMD_REG(x)		((((long)(x)) << CTRL_CMD_REG_S) & \
+				 CTRL_CMD_REG_M)
+
+
+
+/* Prototypes for the shared DMA functions in the platform code. */
+
+/* DMA TX Channel type. Right now only limitations used are event types 0/1,
+ * for event-triggered DMA transactions.
+ */
+
+enum pasemi_dmachan_type {
+	RXCHAN = 0,		/* Any RX chan */
+	TXCHAN = 1,		/* Any TX chan */
+	TXCHAN_EVT0 = 0x1001,	/* TX chan in event class 0 (chan 0-9) */
+	TXCHAN_EVT1 = 0x2001,	/* TX chan in event class 1 (chan 10-19) */
+};
+
+struct pasemi_dmachan {
+	int		 chno;		/* Channel number */
+	enum pasemi_dmachan_type chan_type;	/* TX / RX */
+	u64		*status;	/* Ptr to cacheable status */
+	int		 irq;		/* IRQ used by channel */
+	unsigned int	 ring_size;	/* size of allocated ring */
+	dma_addr_t	 ring_dma;	/* DMA address for ring */
+	u64		*ring_virt;	/* Virt address for ring */
+	void		*priv;		/* Ptr to start of client struct */
+};
+
+/* Read/write the different registers in the I/O Bridge, Ethernet
+ * and DMA Controller
+ */
+extern unsigned int pasemi_read_iob_reg(unsigned int reg);
+extern void pasemi_write_iob_reg(unsigned int reg, unsigned int val);
+
+extern unsigned int pasemi_read_mac_reg(int intf, unsigned int reg);
+extern void pasemi_write_mac_reg(int intf, unsigned int reg, unsigned int val);
+
+extern unsigned int pasemi_read_dma_reg(unsigned int reg);
+extern void pasemi_write_dma_reg(unsigned int reg, unsigned int val);
+
+/* Channel management routines */
+
+extern void *pasemi_dma_alloc_chan(enum pasemi_dmachan_type type,
+				   int total_size, int offset);
+extern void pasemi_dma_free_chan(struct pasemi_dmachan *chan);
+
+extern void pasemi_dma_start_chan(const struct pasemi_dmachan *chan,
+				  const u32 cmdsta);
+extern int pasemi_dma_stop_chan(const struct pasemi_dmachan *chan);
+
+/* Common routines to allocate rings and buffers */
+
+extern int pasemi_dma_alloc_ring(struct pasemi_dmachan *chan, int ring_size);
+extern void pasemi_dma_free_ring(struct pasemi_dmachan *chan);
+
+extern void *pasemi_dma_alloc_buf(struct pasemi_dmachan *chan, int size,
+				  dma_addr_t *handle);
+extern void pasemi_dma_free_buf(struct pasemi_dmachan *chan, int size,
+				dma_addr_t *handle);
+
+/* Routines to allocate flags (events) for channel syncronization */
+extern int  pasemi_dma_alloc_flag(void);
+extern void pasemi_dma_free_flag(int flag);
+extern void pasemi_dma_set_flag(int flag);
+extern void pasemi_dma_clear_flag(int flag);
+
+/* Routines to allocate function engines */
+extern int  pasemi_dma_alloc_fun(void);
+extern void pasemi_dma_free_fun(int fun);
+
+/* Initialize the library, must be called before any other functions */
+extern int pasemi_dma_init(void);
+
+#endif /* ASM_PASEMI_DMA_H */
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
new file mode 100644
index 000000000000..ae2ea803a0f2
--- /dev/null
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -0,0 +1,302 @@
+#ifndef _ASM_POWERPC_PCI_BRIDGE_H
+#define _ASM_POWERPC_PCI_BRIDGE_H
+#ifdef __KERNEL__
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/pci.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+
+struct device_node;
+
+extern unsigned int ppc_pci_flags;
+enum {
+	/* Force re-assigning all resources (ignore firmware
+	 * setup completely)
+	 */
+	PPC_PCI_REASSIGN_ALL_RSRC	= 0x00000001,
+
+	/* Re-assign all bus numbers */
+	PPC_PCI_REASSIGN_ALL_BUS	= 0x00000002,
+
+	/* Do not try to assign, just use existing setup */
+	PPC_PCI_PROBE_ONLY		= 0x00000004,
+
+	/* Don't bother with ISA alignment unless the bridge has
+	 * ISA forwarding enabled
+	 */
+	PPC_PCI_CAN_SKIP_ISA_ALIGN	= 0x00000008,
+
+	/* Enable domain numbers in /proc */
+	PPC_PCI_ENABLE_PROC_DOMAINS	= 0x00000010,
+	/* ... except for domain 0 */
+	PPC_PCI_COMPAT_DOMAIN_0		= 0x00000020,
+};
+
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+	struct pci_bus *bus;
+	char is_dynamic;
+#ifdef CONFIG_PPC64
+	int node;
+#endif
+	struct device_node *dn;
+	struct list_head list_node;
+	struct device *parent;
+
+	int first_busno;
+	int last_busno;
+#ifndef CONFIG_PPC64
+	int self_busno;
+#endif
+
+	void __iomem *io_base_virt;
+#ifdef CONFIG_PPC64
+	void *io_base_alloc;
+#endif
+	resource_size_t io_base_phys;
+#ifndef CONFIG_PPC64
+	resource_size_t pci_io_size;
+#endif
+
+	/* Some machines (PReP) have a non 1:1 mapping of
+	 * the PCI memory space in the CPU bus space
+	 */
+	resource_size_t pci_mem_offset;
+#ifdef CONFIG_PPC64
+	unsigned long pci_io_size;
+#endif
+
+	struct pci_ops *ops;
+	unsigned int __iomem *cfg_addr;
+	void __iomem *cfg_data;
+
+#ifndef CONFIG_PPC64
+	/*
+	 * Used for variants of PCI indirect handling and possible quirks:
+	 *  SET_CFG_TYPE - used on 4xx or any PHB that does explicit type0/1
+	 *  EXT_REG - provides access to PCI-e extended registers
+	 *  SURPRESS_PRIMARY_BUS - we surpress the setting of PCI_PRIMARY_BUS
+	 *   on Freescale PCI-e controllers since they used the PCI_PRIMARY_BUS
+	 *   to determine which bus number to match on when generating type0
+	 *   config cycles
+	 *  NO_PCIE_LINK - the Freescale PCI-e controllers have issues with
+	 *   hanging if we don't have link and try to do config cycles to
+	 *   anything but the PHB.  Only allow talking to the PHB if this is
+	 *   set.
+	 *  BIG_ENDIAN - cfg_addr is a big endian register
+	 *  BROKEN_MRM - the 440EPx/GRx chips have an errata that causes hangs on
+	 *   the PLB4.  Effectively disable MRM commands by setting this.
+	 */
+#define PPC_INDIRECT_TYPE_SET_CFG_TYPE		0x00000001
+#define PPC_INDIRECT_TYPE_EXT_REG		0x00000002
+#define PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS	0x00000004
+#define PPC_INDIRECT_TYPE_NO_PCIE_LINK		0x00000008
+#define PPC_INDIRECT_TYPE_BIG_ENDIAN		0x00000010
+#define PPC_INDIRECT_TYPE_BROKEN_MRM		0x00000020
+	u32 indirect_type;
+#endif	/* !CONFIG_PPC64 */
+	/* Currently, we limit ourselves to 1 IO range and 3 mem
+	 * ranges since the common pci_bus structure can't handle more
+	 */
+	struct resource	io_resource;
+	struct resource mem_resources[3];
+	int global_number;		/* PCI domain number */
+#ifdef CONFIG_PPC64
+	unsigned long buid;
+	unsigned long dma_window_base_cur;
+	unsigned long dma_window_size;
+
+	void *private_data;
+#endif	/* CONFIG_PPC64 */
+};
+
+#ifndef CONFIG_PPC64
+
+static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
+{
+	return bus->sysdata;
+}
+
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+	/* No specific ISA handling on ppc32 at this stage, it
+	 * all goes through PCI
+	 */
+	return 0;
+}
+
+/* These are used for config access before all the PCI probing
+   has been done. */
+extern int early_read_config_byte(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u8 *val);
+extern int early_read_config_word(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u16 *val);
+extern int early_read_config_dword(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u32 *val);
+extern int early_write_config_byte(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u8 val);
+extern int early_write_config_word(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u16 val);
+extern int early_write_config_dword(struct pci_controller *hose, int bus,
+			int dev_fn, int where, u32 val);
+
+extern int early_find_capability(struct pci_controller *hose, int bus,
+				 int dev_fn, int cap);
+
+extern void setup_indirect_pci(struct pci_controller* hose,
+			       resource_size_t cfg_addr,
+			       resource_size_t cfg_data, u32 flags);
+extern void setup_grackle(struct pci_controller *hose);
+#else	/* CONFIG_PPC64 */
+
+/*
+ * PCI stuff, for nodes representing PCI devices, pointed to
+ * by device_node->data.
+ */
+struct iommu_table;
+
+struct pci_dn {
+	int	busno;			/* pci bus number */
+	int	devfn;			/* pci device and function number */
+
+	struct  pci_controller *phb;	/* for pci devices */
+	struct	iommu_table *iommu_table;	/* for phb's or bridges */
+	struct	device_node *node;	/* back-pointer to the device_node */
+
+	int	pci_ext_config_space;	/* for pci devices */
+
+#ifdef CONFIG_EEH
+	struct	pci_dev *pcidev;	/* back-pointer to the pci device */
+	int	class_code;		/* pci device class */
+	int	eeh_mode;		/* See eeh.h for possible EEH_MODEs */
+	int	eeh_config_addr;
+	int	eeh_pe_config_addr; /* new-style partition endpoint address */
+	int	eeh_check_count;	/* # times driver ignored error */
+	int	eeh_freeze_count;	/* # times this device froze up. */
+	int	eeh_false_positives;	/* # times this device reported #ff's */
+	u32	config_space[16];	/* saved PCI config space */
+#endif
+};
+
+/* Get the pointer to a device_node's pci_dn */
+#define PCI_DN(dn)	((struct pci_dn *) (dn)->data)
+
+extern struct device_node *fetch_dev_dn(struct pci_dev *dev);
+
+/* Get a device_node from a pci_dev.  This code must be fast except
+ * in the case where the sysdata is incorrect and needs to be fixed
+ * up (this will only happen once).
+ * In this case the sysdata will have been inherited from a PCI host
+ * bridge or a PCI-PCI bridge further up the tree, so it will point
+ * to a valid struct pci_dn, just not the one we want.
+ */
+static inline struct device_node *pci_device_to_OF_node(struct pci_dev *dev)
+{
+	struct device_node *dn = dev->sysdata;
+	struct pci_dn *pdn = dn->data;
+
+	if (pdn && pdn->devfn == dev->devfn && pdn->busno == dev->bus->number)
+		return dn;	/* fast path.  sysdata is good */
+	return fetch_dev_dn(dev);
+}
+
+static inline int pci_device_from_OF_node(struct device_node *np,
+					  u8 *bus, u8 *devfn)
+{
+	if (!PCI_DN(np))
+		return -ENODEV;
+	*bus = PCI_DN(np)->busno;
+	*devfn = PCI_DN(np)->devfn;
+	return 0;
+}
+
+static inline struct device_node *pci_bus_to_OF_node(struct pci_bus *bus)
+{
+	if (bus->self)
+		return pci_device_to_OF_node(bus->self);
+	else
+		return bus->sysdata; /* Must be root bus (PHB) */
+}
+
+/** Find the bus corresponding to the indicated device node */
+extern struct pci_bus *pcibios_find_pci_bus(struct device_node *dn);
+
+/** Remove all of the PCI devices under this bus */
+extern void pcibios_remove_pci_devices(struct pci_bus *bus);
+
+/** Discover new pci devices under this bus, and add them */
+extern void pcibios_add_pci_devices(struct pci_bus *bus);
+extern void pcibios_fixup_new_pci_devices(struct pci_bus *bus);
+
+extern int pcibios_remove_root_bus(struct pci_controller *phb);
+
+static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
+{
+	struct device_node *busdn = bus->sysdata;
+
+	BUG_ON(busdn == NULL);
+	return PCI_DN(busdn)->phb;
+}
+
+
+extern void isa_bridge_find_early(struct pci_controller *hose);
+
+static inline int isa_vaddr_is_ioport(void __iomem *address)
+{
+	/* Check if address hits the reserved legacy IO range */
+	unsigned long ea = (unsigned long)address;
+	return ea >= ISA_IO_BASE && ea < ISA_IO_END;
+}
+
+extern int pcibios_unmap_io_space(struct pci_bus *bus);
+extern int pcibios_map_io_space(struct pci_bus *bus);
+
+/* Return values for ppc_md.pci_probe_mode function */
+#define PCI_PROBE_NONE		-1	/* Don't look at this bus at all */
+#define PCI_PROBE_NORMAL	0	/* Do normal PCI probing */
+#define PCI_PROBE_DEVTREE	1	/* Instantiate from device tree */
+
+#ifdef CONFIG_NUMA
+#define PHB_SET_NODE(PHB, NODE)		((PHB)->node = (NODE))
+#else
+#define PHB_SET_NODE(PHB, NODE)		((PHB)->node = -1)
+#endif
+
+#endif	/* CONFIG_PPC64 */
+
+/* Get the PCI host controller for an OF device */
+extern struct pci_controller *pci_find_hose_for_OF_device(
+			struct device_node* node);
+
+/* Fill up host controller resources from the OF node */
+extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
+			struct device_node *dev, int primary);
+
+/* Allocate & free a PCI host bridge structure */
+extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
+extern void pcibios_free_controller(struct pci_controller *phb);
+
+#ifdef CONFIG_PCI
+extern unsigned long pci_address_to_pio(phys_addr_t address);
+extern int pcibios_vaddr_is_ioport(void __iomem *address);
+#else
+static inline unsigned long pci_address_to_pio(phys_addr_t address)
+{
+	return (unsigned long)-1;
+}
+static inline int pcibios_vaddr_is_ioport(void __iomem *address)
+{
+	return 0;
+}
+#endif	/* CONFIG_PCI */
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_PCI_BRIDGE_H */
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
new file mode 100644
index 000000000000..a05a942b1c25
--- /dev/null
+++ b/arch/powerpc/include/asm/pci.h
@@ -0,0 +1,228 @@
+#ifndef __ASM_POWERPC_PCI_H
+#define __ASM_POWERPC_PCI_H
+#ifdef __KERNEL__
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/machdep.h>
+#include <asm/scatterlist.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+
+#include <asm-generic/pci-dma-compat.h>
+
+#define PCIBIOS_MIN_IO		0x1000
+#define PCIBIOS_MIN_MEM		0x10000000
+
+struct pci_dev;
+
+/* Values for the `which' argument to sys_pciconfig_iobase syscall.  */
+#define IOBASE_BRIDGE_NUMBER	0
+#define IOBASE_MEMORY		1
+#define IOBASE_IO		2
+#define IOBASE_ISA_IO		3
+#define IOBASE_ISA_MEM		4
+
+/*
+ * Set this to 1 if you want the kernel to re-assign all PCI
+ * bus numbers (don't do that on ppc64 yet !)
+ */
+#define pcibios_assign_all_busses()    	(ppc_pci_flags & \
+					 PPC_PCI_REASSIGN_ALL_BUS)
+#define pcibios_scan_all_fns(a, b)	0
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+#define HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	if (ppc_md.pci_get_legacy_ide_irq)
+		return ppc_md.pci_get_legacy_ide_irq(dev, channel);
+	return channel ? 15 : 14;
+}
+
+#ifdef CONFIG_PPC64
+
+/*
+ * We want to avoid touching the cacheline size or MWI bit.
+ * pSeries firmware sets the cacheline size (which is not the cpu cacheline
+ * size in all cases) and hardware treats MWI the same as memory write.
+ */
+#define PCI_DISABLE_MWI
+
+#ifdef CONFIG_PCI
+extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops);
+extern struct dma_mapping_ops *get_pci_dma_ops(void);
+
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_MULTIPLE;
+	*strategy_parameter = cacheline_size;
+}
+#else	/* CONFIG_PCI */
+#define set_pci_dma_ops(d)
+#define get_pci_dma_ops()	NULL
+#endif
+
+#else /* 32-bit */
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+#endif /* CONFIG_PPC64 */
+
+extern int pci_domain_nr(struct pci_bus *bus);
+
+/* Decide whether to display the domain number in /proc */
+extern int pci_proc_domain(struct pci_bus *bus);
+
+
+struct vm_area_struct;
+/* Map a range of PCI memory or I/O space for a device into user space */
+int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
+			enum pci_mmap_state mmap_state, int write_combine);
+
+/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
+#define HAVE_PCI_MMAP	1
+
+#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE)
+/*
+ * For 64-bit kernels, pci_unmap_{single,page} is not a nop.
+ * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and
+ * so on are not nops.
+ * and thus...
+ */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+#else /* 32-bit && coherent */
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+
+#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */
+
+#ifdef CONFIG_PPC64
+
+/* The PCI address space does not equal the physical memory address
+ * space (we have an IOMMU).  The IDE and SCSI device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(0)
+
+#else /* 32-bit */
+
+/* The PCI address space does equal the physical memory
+ * address space (no IOMMU).  The IDE and SCSI device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (1)
+
+#endif /* CONFIG_PPC64 */
+
+extern void pcibios_resource_to_bus(struct pci_dev *dev,
+			struct pci_bus_region *region,
+			struct resource *res);
+
+extern void pcibios_bus_to_resource(struct pci_dev *dev,
+			struct resource *res,
+			struct pci_bus_region *region);
+
+static inline struct resource *pcibios_select_root(struct pci_dev *pdev,
+			struct resource *res)
+{
+	struct resource *root = NULL;
+
+	if (res->flags & IORESOURCE_IO)
+		root = &ioport_resource;
+	if (res->flags & IORESOURCE_MEM)
+		root = &iomem_resource;
+
+	return root;
+}
+
+extern void pcibios_setup_new_device(struct pci_dev *dev);
+
+extern void pcibios_claim_one_bus(struct pci_bus *b);
+
+extern void pcibios_resource_survey(void);
+
+extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
+
+extern struct pci_dev *of_create_pci_dev(struct device_node *node,
+					struct pci_bus *bus, int devfn);
+
+extern void of_scan_pci_bridge(struct device_node *node,
+				struct pci_dev *dev);
+
+extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
+
+extern int pci_read_irq_line(struct pci_dev *dev);
+
+struct file;
+extern pgprot_t	pci_phys_mem_access_prot(struct file *file,
+					 unsigned long pfn,
+					 unsigned long size,
+					 pgprot_t prot);
+
+#define HAVE_ARCH_PCI_RESOURCE_TO_USER
+extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
+				 const struct resource *rsrc,
+				 resource_size_t *start, resource_size_t *end);
+
+extern void pcibios_do_bus_setup(struct pci_bus *bus);
+extern void pcibios_fixup_of_probed_bus(struct pci_bus *bus);
+
+#endif	/* __KERNEL__ */
+#endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/include/asm/percpu.h b/arch/powerpc/include/asm/percpu.h
new file mode 100644
index 000000000000..f879252b7ea6
--- /dev/null
+++ b/arch/powerpc/include/asm/percpu.h
@@ -0,0 +1,24 @@
+#ifndef _ASM_POWERPC_PERCPU_H_
+#define _ASM_POWERPC_PERCPU_H_
+#ifdef __powerpc64__
+#include <linux/compiler.h>
+
+/*
+ * Same as asm-generic/percpu.h, except that we store the per cpu offset
+ * in the paca. Based on the x86-64 implementation.
+ */
+
+#ifdef CONFIG_SMP
+
+#include <asm/paca.h>
+
+#define __per_cpu_offset(cpu) (paca[cpu].data_offset)
+#define __my_cpu_offset local_paca->data_offset
+#define per_cpu_offset(x) (__per_cpu_offset(x))
+
+#endif /* CONFIG_SMP */
+#endif /* __powerpc64__ */
+
+#include <asm-generic/percpu.h>
+
+#endif /* _ASM_POWERPC_PERCPU_H_ */
diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h
new file mode 100644
index 000000000000..58c07147b3ea
--- /dev/null
+++ b/arch/powerpc/include/asm/pgalloc-32.h
@@ -0,0 +1,43 @@
+#ifndef _ASM_POWERPC_PGALLOC_32_H
+#define _ASM_POWERPC_PGALLOC_32_H
+
+#include <linux/threads.h>
+
+extern void __bad_pte(pmd_t *pmd);
+
+extern pgd_t *pgd_alloc(struct mm_struct *mm);
+extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
+
+/*
+ * We don't have any real pmd's, and this code never triggers because
+ * the pgd will always be present..
+ */
+/* #define pmd_alloc_one(mm,address)       ({ BUG(); ((pmd_t *)2); }) */
+#define pmd_free(mm, x) 		do { } while (0)
+#define __pmd_free_tlb(tlb,x)		do { } while (0)
+/* #define pgd_populate(mm, pmd, pte)      BUG() */
+
+#ifndef CONFIG_BOOKE
+#define pmd_populate_kernel(mm, pmd, pte)	\
+		(pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
+#define pmd_populate(mm, pmd, pte)	\
+		(pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
+#define pmd_pgtable(pmd) pmd_page(pmd)
+#else
+#define pmd_populate_kernel(mm, pmd, pte)	\
+		(pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
+#define pmd_populate(mm, pmd, pte)	\
+		(pmd_val(*(pmd)) = (unsigned long)lowmem_page_address(pte) | _PMD_PRESENT)
+#define pmd_pgtable(pmd) pmd_page(pmd)
+#endif
+
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
+extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr);
+extern void pte_free_kernel(struct mm_struct *mm, pte_t *pte);
+extern void pte_free(struct mm_struct *mm, pgtable_t pte);
+
+#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, (pte))
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _ASM_POWERPC_PGALLOC_32_H */
diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
new file mode 100644
index 000000000000..812a1d8f35cb
--- /dev/null
+++ b/arch/powerpc/include/asm/pgalloc-64.h
@@ -0,0 +1,166 @@
+#ifndef _ASM_POWERPC_PGALLOC_64_H
+#define _ASM_POWERPC_PGALLOC_64_H
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/cpumask.h>
+#include <linux/percpu.h>
+
+#ifndef CONFIG_PPC_SUBPAGE_PROT
+static inline void subpage_prot_free(pgd_t *pgd) {}
+#endif
+
+extern struct kmem_cache *pgtable_cache[];
+
+#define PGD_CACHE_NUM		0
+#define PUD_CACHE_NUM		1
+#define PMD_CACHE_NUM		1
+#define HUGEPTE_CACHE_NUM	2
+#define PTE_NONCACHE_NUM	7  /* from GFP rather than kmem_cache */
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	return kmem_cache_alloc(pgtable_cache[PGD_CACHE_NUM], GFP_KERNEL);
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	subpage_prot_free(pgd);
+	kmem_cache_free(pgtable_cache[PGD_CACHE_NUM], pgd);
+}
+
+#ifndef CONFIG_PPC_64K_PAGES
+
+#define pgd_populate(MM, PGD, PUD)	pgd_set(PGD, PUD)
+
+static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return kmem_cache_alloc(pgtable_cache[PUD_CACHE_NUM],
+				GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline void pud_free(struct mm_struct *mm, pud_t *pud)
+{
+	kmem_cache_free(pgtable_cache[PUD_CACHE_NUM], pud);
+}
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	pud_set(pud, (unsigned long)pmd);
+}
+
+#define pmd_populate(mm, pmd, pte_page) \
+	pmd_populate_kernel(mm, pmd, page_address(pte_page))
+#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, (unsigned long)(pte))
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+
+#else /* CONFIG_PPC_64K_PAGES */
+
+#define pud_populate(mm, pud, pmd)	pud_set(pud, (unsigned long)pmd)
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+				       pte_t *pte)
+{
+	pmd_set(pmd, (unsigned long)pte);
+}
+
+#define pmd_populate(mm, pmd, pte_page) \
+	pmd_populate_kernel(mm, pmd, page_address(pte_page))
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+#endif /* CONFIG_PPC_64K_PAGES */
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return kmem_cache_alloc(pgtable_cache[PMD_CACHE_NUM],
+				GFP_KERNEL|__GFP_REPEAT);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	kmem_cache_free(pgtable_cache[PMD_CACHE_NUM], pmd);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+					  unsigned long address)
+{
+        return (pte_t *)__get_free_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+					unsigned long address)
+{
+	struct page *page;
+	pte_t *pte;
+
+	pte = pte_alloc_one_kernel(mm, address);
+	if (!pte)
+		return NULL;
+	page = virt_to_page(pte);
+	pgtable_page_ctor(page);
+	return page;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)
+{
+	pgtable_page_dtor(ptepage);
+	__free_page(ptepage);
+}
+
+#define PGF_CACHENUM_MASK	0x7
+
+typedef struct pgtable_free {
+	unsigned long val;
+} pgtable_free_t;
+
+static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
+						unsigned long mask)
+{
+	BUG_ON(cachenum > PGF_CACHENUM_MASK);
+
+	return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum};
+}
+
+static inline void pgtable_free(pgtable_free_t pgf)
+{
+	void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK);
+	int cachenum = pgf.val & PGF_CACHENUM_MASK;
+
+	if (cachenum == PTE_NONCACHE_NUM)
+		free_page((unsigned long)p);
+	else
+		kmem_cache_free(pgtable_cache[cachenum], p);
+}
+
+extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
+
+#define __pte_free_tlb(tlb,ptepage)	\
+do { \
+	pgtable_page_dtor(ptepage); \
+	pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
+		PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
+} while (0)
+#define __pmd_free_tlb(tlb, pmd) 	\
+	pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
+		PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
+#ifndef CONFIG_PPC_64K_PAGES
+#define __pud_free_tlb(tlb, pud)	\
+	pgtable_free_tlb(tlb, pgtable_free_cache(pud, \
+		PUD_CACHE_NUM, PUD_TABLE_SIZE-1))
+#endif /* CONFIG_PPC_64K_PAGES */
+
+#define check_pgt_cache()	do { } while (0)
+
+#endif /* _ASM_POWERPC_PGALLOC_64_H */
diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h
new file mode 100644
index 000000000000..b4505ed0f0f2
--- /dev/null
+++ b/arch/powerpc/include/asm/pgalloc.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_POWERPC_PGALLOC_H
+#define _ASM_POWERPC_PGALLOC_H
+#ifdef __KERNEL__
+
+#ifdef CONFIG_PPC64
+#include <asm/pgalloc-64.h>
+#else
+#include <asm/pgalloc-32.h>
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PGALLOC_H */
diff --git a/arch/powerpc/include/asm/pgtable-4k.h b/arch/powerpc/include/asm/pgtable-4k.h
new file mode 100644
index 000000000000..6b18ba9d2d85
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable-4k.h
@@ -0,0 +1,117 @@
+#ifndef _ASM_POWERPC_PGTABLE_4K_H
+#define _ASM_POWERPC_PGTABLE_4K_H
+/*
+ * Entries per page directory level.  The PTE level must use a 64b record
+ * for each page table entry.  The PMD and PGD level use a 32b record for
+ * each entry by assuming that each entry is page aligned.
+ */
+#define PTE_INDEX_SIZE  9
+#define PMD_INDEX_SIZE  7
+#define PUD_INDEX_SIZE  7
+#define PGD_INDEX_SIZE  9
+
+#ifndef __ASSEMBLY__
+#define PTE_TABLE_SIZE	(sizeof(pte_t) << PTE_INDEX_SIZE)
+#define PMD_TABLE_SIZE	(sizeof(pmd_t) << PMD_INDEX_SIZE)
+#define PUD_TABLE_SIZE	(sizeof(pud_t) << PUD_INDEX_SIZE)
+#define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
+#endif	/* __ASSEMBLY__ */
+
+#define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
+#define PTRS_PER_PMD	(1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PUD	(1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PGD	(1 << PGD_INDEX_SIZE)
+
+/* PMD_SHIFT determines what a second-level page table entry can map */
+#define PMD_SHIFT	(PAGE_SHIFT + PTE_INDEX_SIZE)
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* With 4k base page size, hugepage PTEs go at the PMD level */
+#define MIN_HUGEPTE_SHIFT	PMD_SHIFT
+
+/* PUD_SHIFT determines what a third-level page table entry can map */
+#define PUD_SHIFT	(PMD_SHIFT + PMD_INDEX_SIZE)
+#define PUD_SIZE	(1UL << PUD_SHIFT)
+#define PUD_MASK	(~(PUD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a fourth-level page table entry can map */
+#define PGDIR_SHIFT	(PUD_SHIFT + PUD_INDEX_SIZE)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/* PTE bits */
+#define _PAGE_HASHPTE	0x0400 /* software: pte has an associated HPTE */
+#define _PAGE_SECONDARY 0x8000 /* software: HPTE is in secondary group */
+#define _PAGE_GROUP_IX  0x7000 /* software: HPTE index within group */
+#define _PAGE_F_SECOND  _PAGE_SECONDARY
+#define _PAGE_F_GIX     _PAGE_GROUP_IX
+#define _PAGE_SPECIAL	0x10000 /* software: special page */
+#define __HAVE_ARCH_PTE_SPECIAL
+
+/* PTE flags to conserve for HPTE identification */
+#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | \
+			 _PAGE_SECONDARY | _PAGE_GROUP_IX)
+
+/* There is no 4K PFN hack on 4K pages */
+#define _PAGE_4K_PFN	0
+
+/* PAGE_MASK gives the right answer below, but only by accident */
+/* It should be preserving the high 48 bits and then specifically */
+/* preserving _PAGE_SECONDARY | _PAGE_GROUP_IX */
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \
+                         _PAGE_HPTEFLAGS)
+
+/* Bits to mask out from a PMD to get to the PTE page */
+#define PMD_MASKED_BITS		0
+/* Bits to mask out from a PUD to get to the PMD page */
+#define PUD_MASKED_BITS		0
+/* Bits to mask out from a PGD to get to the PUD page */
+#define PGD_MASKED_BITS		0
+
+/* shift to put page number into pte */
+#define PTE_RPN_SHIFT	(17)
+
+#ifdef STRICT_MM_TYPECHECKS
+#define __real_pte(e,p)		((real_pte_t){(e)})
+#define __rpte_to_pte(r)	((r).pte)
+#else
+#define __real_pte(e,p)		(e)
+#define __rpte_to_pte(r)	(__pte(r))
+#endif
+#define __rpte_to_hidx(r,index)	(pte_val(__rpte_to_pte(r)) >> 12)
+
+#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift)       \
+	do {							         \
+		index = 0;					         \
+		shift = mmu_psize_defs[psize].shift;		         \
+
+#define pte_iterate_hashed_end() } while(0)
+
+#ifdef CONFIG_PPC_HAS_HASH_64K
+#define pte_pagesize_index(mm, addr, pte)	get_slice_psize(mm, addr)
+#else
+#define pte_pagesize_index(mm, addr, pte)	MMU_PAGE_4K
+#endif
+
+/*
+ * 4-level page tables related bits
+ */
+
+#define pgd_none(pgd)		(!pgd_val(pgd))
+#define pgd_bad(pgd)		(pgd_val(pgd) == 0)
+#define pgd_present(pgd)	(pgd_val(pgd) != 0)
+#define pgd_clear(pgdp)		(pgd_val(*(pgdp)) = 0)
+#define pgd_page_vaddr(pgd)	(pgd_val(pgd) & ~PGD_MASKED_BITS)
+#define pgd_page(pgd)		virt_to_page(pgd_page_vaddr(pgd))
+
+#define pud_offset(pgdp, addr)	\
+  (((pud_t *) pgd_page_vaddr(*(pgdp))) + \
+    (((addr) >> PUD_SHIFT) & (PTRS_PER_PUD - 1)))
+
+#define pud_ERROR(e) \
+	printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
+
+#define remap_4k_pfn(vma, addr, pfn, prot)	\
+	remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE, (prot))
+#endif /* _ASM_POWERPC_PGTABLE_4K_H */
diff --git a/arch/powerpc/include/asm/pgtable-64k.h b/arch/powerpc/include/asm/pgtable-64k.h
new file mode 100644
index 000000000000..07b0d8f09cb6
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable-64k.h
@@ -0,0 +1,155 @@
+#ifndef _ASM_POWERPC_PGTABLE_64K_H
+#define _ASM_POWERPC_PGTABLE_64K_H
+
+#include <asm-generic/pgtable-nopud.h>
+
+
+#define PTE_INDEX_SIZE  12
+#define PMD_INDEX_SIZE  12
+#define PUD_INDEX_SIZE	0
+#define PGD_INDEX_SIZE  4
+
+#ifndef __ASSEMBLY__
+#define PTE_TABLE_SIZE	(sizeof(real_pte_t) << PTE_INDEX_SIZE)
+#define PMD_TABLE_SIZE	(sizeof(pmd_t) << PMD_INDEX_SIZE)
+#define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
+
+#define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
+#define PTRS_PER_PMD	(1 << PMD_INDEX_SIZE)
+#define PTRS_PER_PGD	(1 << PGD_INDEX_SIZE)
+
+#ifdef CONFIG_PPC_SUBPAGE_PROT
+/*
+ * For the sub-page protection option, we extend the PGD with one of
+ * these.  Basically we have a 3-level tree, with the top level being
+ * the protptrs array.  To optimize speed and memory consumption when
+ * only addresses < 4GB are being protected, pointers to the first
+ * four pages of sub-page protection words are stored in the low_prot
+ * array.
+ * Each page of sub-page protection words protects 1GB (4 bytes
+ * protects 64k).  For the 3-level tree, each page of pointers then
+ * protects 8TB.
+ */
+struct subpage_prot_table {
+	unsigned long maxaddr;	/* only addresses < this are protected */
+	unsigned int **protptrs[2];
+	unsigned int *low_prot[4];
+};
+
+#undef PGD_TABLE_SIZE
+#define PGD_TABLE_SIZE		((sizeof(pgd_t) << PGD_INDEX_SIZE) + \
+				 sizeof(struct subpage_prot_table))
+
+#define SBP_L1_BITS		(PAGE_SHIFT - 2)
+#define SBP_L2_BITS		(PAGE_SHIFT - 3)
+#define SBP_L1_COUNT		(1 << SBP_L1_BITS)
+#define SBP_L2_COUNT		(1 << SBP_L2_BITS)
+#define SBP_L2_SHIFT		(PAGE_SHIFT + SBP_L1_BITS)
+#define SBP_L3_SHIFT		(SBP_L2_SHIFT + SBP_L2_BITS)
+
+extern void subpage_prot_free(pgd_t *pgd);
+
+static inline struct subpage_prot_table *pgd_subpage_prot(pgd_t *pgd)
+{
+	return (struct subpage_prot_table *)(pgd + PTRS_PER_PGD);
+}
+#endif /* CONFIG_PPC_SUBPAGE_PROT */
+#endif	/* __ASSEMBLY__ */
+
+/* With 4k base page size, hugepage PTEs go at the PMD level */
+#define MIN_HUGEPTE_SHIFT	PAGE_SHIFT
+
+/* PMD_SHIFT determines what a second-level page table entry can map */
+#define PMD_SHIFT	(PAGE_SHIFT + PTE_INDEX_SIZE)
+#define PMD_SIZE	(1UL << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	(PMD_SHIFT + PMD_INDEX_SIZE)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/* Additional PTE bits (don't change without checking asm in hash_low.S) */
+#define __HAVE_ARCH_PTE_SPECIAL
+#define _PAGE_SPECIAL	0x00000400 /* software: special page */
+#define _PAGE_HPTE_SUB	0x0ffff000 /* combo only: sub pages HPTE bits */
+#define _PAGE_HPTE_SUB0	0x08000000 /* combo only: first sub page */
+#define _PAGE_COMBO	0x10000000 /* this is a combo 4k page */
+#define _PAGE_4K_PFN	0x20000000 /* PFN is for a single 4k page */
+
+/* For 64K page, we don't have a separate _PAGE_HASHPTE bit. Instead,
+ * we set that to be the whole sub-bits mask. The C code will only
+ * test this, so a multi-bit mask will work. For combo pages, this
+ * is equivalent as effectively, the old _PAGE_HASHPTE was an OR of
+ * all the sub bits. For real 64k pages, we now have the assembly set
+ * _PAGE_HPTE_SUB0 in addition to setting the HIDX bits which overlap
+ * that mask. This is fine as long as the HIDX bits are never set on
+ * a PTE that isn't hashed, which is the case today.
+ *
+ * A little nit is for the huge page C code, which does the hashing
+ * in C, we need to provide which bit to use.
+ */
+#define _PAGE_HASHPTE	_PAGE_HPTE_SUB
+
+/* Note the full page bits must be in the same location as for normal
+ * 4k pages as the same asssembly will be used to insert 64K pages
+ * wether the kernel has CONFIG_PPC_64K_PAGES or not
+ */
+#define _PAGE_F_SECOND  0x00008000 /* full page: hidx bits */
+#define _PAGE_F_GIX     0x00007000 /* full page: hidx bits */
+
+/* PTE flags to conserve for HPTE identification */
+#define _PAGE_HPTEFLAGS (_PAGE_BUSY | _PAGE_HASHPTE | _PAGE_COMBO)
+
+/* Shift to put page number into pte.
+ *
+ * That gives us a max RPN of 34 bits, which means a max of 50 bits
+ * of addressable physical space, or 46 bits for the special 4k PFNs.
+ */
+#define PTE_RPN_SHIFT	(30)
+#define PTE_RPN_MAX	(1UL << (64 - PTE_RPN_SHIFT))
+#define PTE_RPN_MASK	(~((1UL<<PTE_RPN_SHIFT)-1))
+
+/* _PAGE_CHG_MASK masks of bits that are to be preserved accross
+ * pgprot changes
+ */
+#define _PAGE_CHG_MASK	(PTE_RPN_MASK | _PAGE_HPTEFLAGS | _PAGE_DIRTY | \
+                         _PAGE_ACCESSED)
+
+/* Bits to mask out from a PMD to get to the PTE page */
+#define PMD_MASKED_BITS		0x1ff
+/* Bits to mask out from a PGD/PUD to get to the PMD page */
+#define PUD_MASKED_BITS		0x1ff
+
+/* Manipulate "rpte" values */
+#define __real_pte(e,p) 	((real_pte_t) { \
+	(e), pte_val(*((p) + PTRS_PER_PTE)) })
+#define __rpte_to_hidx(r,index)	((pte_val((r).pte) & _PAGE_COMBO) ? \
+        (((r).hidx >> ((index)<<2)) & 0xf) : ((pte_val((r).pte) >> 12) & 0xf))
+#define __rpte_to_pte(r)	((r).pte)
+#define __rpte_sub_valid(rpte, index) \
+	(pte_val(rpte.pte) & (_PAGE_HPTE_SUB0 >> (index)))
+
+
+/* Trick: we set __end to va + 64k, which happens works for
+ * a 16M page as well as we want only one iteration
+ */
+#define pte_iterate_hashed_subpages(rpte, psize, va, index, shift)	    \
+        do {                                                                \
+                unsigned long __end = va + PAGE_SIZE;                       \
+                unsigned __split = (psize == MMU_PAGE_4K ||                 \
+				    psize == MMU_PAGE_64K_AP);              \
+                shift = mmu_psize_defs[psize].shift;                        \
+		for (index = 0; va < __end; index++, va += (1L << shift)) { \
+		        if (!__split || __rpte_sub_valid(rpte, index)) do { \
+
+#define pte_iterate_hashed_end() } while(0); } } while(0)
+
+#define pte_pagesize_index(mm, addr, pte)	\
+	(((pte) & _PAGE_COMBO)? MMU_PAGE_4K: MMU_PAGE_64K)
+
+#define remap_4k_pfn(vma, addr, pfn, prot)				\
+	remap_pfn_range((vma), (addr), (pfn), PAGE_SIZE,		\
+			__pgprot(pgprot_val((prot)) | _PAGE_4K_PFN))
+
+#endif /* _ASM_POWERPC_PGTABLE_64K_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
new file mode 100644
index 000000000000..6fe39e327047
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -0,0 +1,802 @@
+#ifndef _ASM_POWERPC_PGTABLE_PPC32_H
+#define _ASM_POWERPC_PGTABLE_PPC32_H
+
+#include <asm-generic/pgtable-nopmd.h>
+
+#ifndef __ASSEMBLY__
+#include <linux/sched.h>
+#include <linux/threads.h>
+#include <asm/io.h>			/* For sub-arch specific PPC_PIN_SIZE */
+
+extern unsigned long va_to_phys(unsigned long address);
+extern pte_t *va_to_pte(unsigned long address);
+extern unsigned long ioremap_bot, ioremap_base;
+
+#ifdef CONFIG_44x
+extern int icache_44x_need_flush;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * The PowerPC MMU uses a hash table containing PTEs, together with
+ * a set of 16 segment registers (on 32-bit implementations), to define
+ * the virtual to physical address mapping.
+ *
+ * We use the hash table as an extended TLB, i.e. a cache of currently
+ * active mappings.  We maintain a two-level page table tree, much
+ * like that used by the i386, for the sake of the Linux memory
+ * management code.  Low-level assembler code in hashtable.S
+ * (procedure hash_page) is responsible for extracting ptes from the
+ * tree and putting them into the hash table when necessary, and
+ * updating the accessed and modified bits in the page table tree.
+ */
+
+/*
+ * The PowerPC MPC8xx uses a TLB with hardware assisted, software tablewalk.
+ * We also use the two level tables, but we can put the real bits in them
+ * needed for the TLB and tablewalk.  These definitions require Mx_CTR.PPM = 0,
+ * Mx_CTR.PPCS = 0, and MD_CTR.TWAM = 1.  The level 2 descriptor has
+ * additional page protection (when Mx_CTR.PPCS = 1) that allows TLB hit
+ * based upon user/super access.  The TLB does not have accessed nor write
+ * protect.  We assume that if the TLB get loaded with an entry it is
+ * accessed, and overload the changed bit for write protect.  We use
+ * two bits in the software pte that are supposed to be set to zero in
+ * the TLB entry (24 and 25) for these indicators.  Although the level 1
+ * descriptor contains the guarded and writethrough/copyback bits, we can
+ * set these at the page level since they get copied from the Mx_TWC
+ * register when the TLB entry is loaded.  We will use bit 27 for guard, since
+ * that is where it exists in the MD_TWC, and bit 26 for writethrough.
+ * These will get masked from the level 2 descriptor at TLB load time, and
+ * copied to the MD_TWC before it gets loaded.
+ * Large page sizes added.  We currently support two sizes, 4K and 8M.
+ * This also allows a TLB hander optimization because we can directly
+ * load the PMD into MD_TWC.  The 8M pages are only used for kernel
+ * mapping of well known areas.  The PMD (PGD) entries contain control
+ * flags in addition to the address, so care must be taken that the
+ * software no longer assumes these are only pointers.
+ */
+
+/*
+ * At present, all PowerPC 400-class processors share a similar TLB
+ * architecture. The instruction and data sides share a unified,
+ * 64-entry, fully-associative TLB which is maintained totally under
+ * software control. In addition, the instruction side has a
+ * hardware-managed, 4-entry, fully-associative TLB which serves as a
+ * first level to the shared TLB. These two TLBs are known as the UTLB
+ * and ITLB, respectively (see "mmu.h" for definitions).
+ */
+
+/*
+ * The normal case is that PTEs are 32-bits and we have a 1-page
+ * 1024-entry pgdir pointing to 1-page 1024-entry PTE pages.  -- paulus
+ *
+ * For any >32-bit physical address platform, we can use the following
+ * two level page table layout where the pgdir is 8KB and the MS 13 bits
+ * are an index to the second level table.  The combined pgdir/pmd first
+ * level has 2048 entries and the second level has 512 64-bit PTE entries.
+ * -Matt
+ */
+/* PGDIR_SHIFT determines what a top-level page table entry can map */
+#define PGDIR_SHIFT	(PAGE_SHIFT + PTE_SHIFT)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: our page-table tree is two-level, so
+ * we don't really have any PMD directory.
+ */
+#ifndef __ASSEMBLY__
+#define PTE_TABLE_SIZE	(sizeof(pte_t) << PTE_SHIFT)
+#define PGD_TABLE_SIZE	(sizeof(pgd_t) << (32 - PGDIR_SHIFT))
+#endif	/* __ASSEMBLY__ */
+
+#define PTRS_PER_PTE	(1 << PTE_SHIFT)
+#define PTRS_PER_PMD	1
+#define PTRS_PER_PGD	(1 << (32 - PGDIR_SHIFT))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
+#define FIRST_USER_ADDRESS	0
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %llx.\n", __FILE__, __LINE__, \
+		(unsigned long long)pte_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 64MB value just means that there will be a 64MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ *
+ * We no longer map larger than phys RAM with the BATs so we don't have
+ * to worry about the VMALLOC_OFFSET causing problems.  We do have to worry
+ * about clashes between our early calls to ioremap() that start growing down
+ * from ioremap_base being run into the VM area allocations (growing upwards
+ * from VMALLOC_START).  For this reason we have ioremap_bot to check when
+ * we actually run into our mappings setup in the early boot with the VM
+ * system.  This really does become a problem for machines with good amounts
+ * of RAM.  -- Cort
+ */
+#define VMALLOC_OFFSET (0x1000000) /* 16M */
+#ifdef PPC_PIN_SIZE
+#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
+#else
+#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
+#endif
+#define VMALLOC_END	ioremap_bot
+
+/*
+ * Bits in a linux-style PTE.  These match the bits in the
+ * (hardware-defined) PowerPC PTE as closely as possible.
+ */
+
+#if defined(CONFIG_40x)
+
+/* There are several potential gotchas here.  The 40x hardware TLBLO
+   field looks like this:
+
+   0  1  2  3  4  ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+   RPN.....................  0  0 EX WR ZSEL.......  W  I  M  G
+
+   Where possible we make the Linux PTE bits match up with this
+
+   - bits 20 and 21 must be cleared, because we use 4k pages (40x can
+     support down to 1k pages), this is done in the TLBMiss exception
+     handler.
+   - We use only zones 0 (for kernel pages) and 1 (for user pages)
+     of the 16 available.  Bit 24-26 of the TLB are cleared in the TLB
+     miss handler.  Bit 27 is PAGE_USER, thus selecting the correct
+     zone.
+   - PRESENT *must* be in the bottom two bits because swap cache
+     entries use the top 30 bits.  Because 40x doesn't support SMP
+     anyway, M is irrelevant so we borrow it for PAGE_PRESENT.  Bit 30
+     is cleared in the TLB miss handler before the TLB entry is loaded.
+   - All other bits of the PTE are loaded into TLBLO without
+     modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
+     software PTE bits.  We actually use use bits 21, 24, 25, and
+     30 respectively for the software bits: ACCESSED, DIRTY, RW, and
+     PRESENT.
+*/
+
+/* Definitions for 40x embedded chips. */
+#define	_PAGE_GUARDED	0x001	/* G: page is guarded from prefetch */
+#define _PAGE_FILE	0x001	/* when !present: nonlinear file mapping */
+#define _PAGE_PRESENT	0x002	/* software: PTE contains a translation */
+#define	_PAGE_NO_CACHE	0x004	/* I: caching is inhibited */
+#define	_PAGE_WRITETHRU	0x008	/* W: caching is write-through */
+#define	_PAGE_USER	0x010	/* matches one of the zone permission bits */
+#define	_PAGE_RW	0x040	/* software: Writes permitted */
+#define	_PAGE_DIRTY	0x080	/* software: dirty page */
+#define _PAGE_HWWRITE	0x100	/* hardware: Dirty & RW, set in exception */
+#define _PAGE_HWEXEC	0x200	/* hardware: EX permission */
+#define _PAGE_ACCESSED	0x400	/* software: R: page referenced */
+
+#define _PMD_PRESENT	0x400	/* PMD points to page of PTEs */
+#define _PMD_BAD	0x802
+#define _PMD_SIZE	0x0e0	/* size field, != 0 for large-page PMD entry */
+#define _PMD_SIZE_4M	0x0c0
+#define _PMD_SIZE_16M	0x0e0
+#define PMD_PAGE_SIZE(pmdval)	(1024 << (((pmdval) & _PMD_SIZE) >> 4))
+
+/* Until my rework is finished, 40x still needs atomic PTE updates */
+#define PTE_ATOMIC_UPDATES	1
+
+#elif defined(CONFIG_44x)
+/*
+ * Definitions for PPC440
+ *
+ * Because of the 3 word TLB entries to support 36-bit addressing,
+ * the attribute are difficult to map in such a fashion that they
+ * are easily loaded during exception processing.  I decided to
+ * organize the entry so the ERPN is the only portion in the
+ * upper word of the PTE and the attribute bits below are packed
+ * in as sensibly as they can be in the area below a 4KB page size
+ * oriented RPN.  This at least makes it easy to load the RPN and
+ * ERPN fields in the TLB. -Matt
+ *
+ * Note that these bits preclude future use of a page size
+ * less than 4KB.
+ *
+ *
+ * PPC 440 core has following TLB attribute fields;
+ *
+ *   TLB1:
+ *   0  1  2  3  4  ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ *   RPN.................................  -  -  -  -  -  - ERPN.......
+ *
+ *   TLB2:
+ *   0  1  2  3  4  ... 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
+ *   -  -  -  -  -    - U0 U1 U2 U3 W  I  M  G  E   - UX UW UR SX SW SR
+ *
+ * Newer 440 cores (440x6 as used on AMCC 460EX/460GT) have additional
+ * TLB2 storage attibute fields. Those are:
+ *
+ *   TLB2:
+ *   0...10    11   12   13   14   15   16...31
+ *   no change WL1  IL1I IL1D IL2I IL2D no change
+ *
+ * There are some constrains and options, to decide mapping software bits
+ * into TLB entry.
+ *
+ *   - PRESENT *must* be in the bottom three bits because swap cache
+ *     entries use the top 29 bits for TLB2.
+ *
+ *   - FILE *must* be in the bottom three bits because swap cache
+ *     entries use the top 29 bits for TLB2.
+ *
+ *   - CACHE COHERENT bit (M) has no effect on PPC440 core, because it
+ *     doesn't support SMP. So we can use this as software bit, like
+ *     DIRTY.
+ *
+ * With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used
+ * for memory protection related functions (see PTE structure in
+ * include/asm-ppc/mmu.h).  The _PAGE_XXX definitions in this file map to the
+ * above bits.  Note that the bit values are CPU specific, not architecture
+ * specific.
+ *
+ * The kernel PTE entry holds an arch-dependent swp_entry structure under
+ * certain situations. In other words, in such situations some portion of
+ * the PTE bits are used as a swp_entry. In the PPC implementation, the
+ * 3-24th LSB are shared with swp_entry, however the 0-2nd three LSB still
+ * hold protection values. That means the three protection bits are
+ * reserved for both PTE and SWAP entry at the most significant three
+ * LSBs.
+ *
+ * There are three protection bits available for SWAP entry:
+ *	_PAGE_PRESENT
+ *	_PAGE_FILE
+ *	_PAGE_HASHPTE (if HW has)
+ *
+ * So those three bits have to be inside of 0-2nd LSB of PTE.
+ *
+ */
+
+#define _PAGE_PRESENT	0x00000001		/* S: PTE valid */
+#define _PAGE_RW	0x00000002		/* S: Write permission */
+#define _PAGE_FILE	0x00000004		/* S: nonlinear file mapping */
+#define _PAGE_HWEXEC	0x00000004		/* H: Execute permission */
+#define _PAGE_ACCESSED	0x00000008		/* S: Page referenced */
+#define _PAGE_DIRTY	0x00000010		/* S: Page dirty */
+#define _PAGE_USER	0x00000040		/* S: User page */
+#define _PAGE_ENDIAN	0x00000080		/* H: E bit */
+#define _PAGE_GUARDED	0x00000100		/* H: G bit */
+#define _PAGE_COHERENT	0x00000200		/* H: M bit */
+#define _PAGE_NO_CACHE	0x00000400		/* H: I bit */
+#define _PAGE_WRITETHRU	0x00000800		/* H: W bit */
+
+/* TODO: Add large page lowmem mapping support */
+#define _PMD_PRESENT	0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD	(~PAGE_MASK)
+
+/* ERPN in a PTE never gets cleared, ignore it */
+#define _PTE_NONE_MASK	0xffffffff00000000ULL
+
+
+#elif defined(CONFIG_FSL_BOOKE)
+/*
+   MMU Assist Register 3:
+
+   32 33 34 35 36  ... 50 51 52 53 54 55 56 57 58 59 60 61 62 63
+   RPN......................  0  0 U0 U1 U2 U3 UX SX UW SW UR SR
+
+   - PRESENT *must* be in the bottom three bits because swap cache
+     entries use the top 29 bits.
+
+   - FILE *must* be in the bottom three bits because swap cache
+     entries use the top 29 bits.
+*/
+
+/* Definitions for FSL Book-E Cores */
+#define _PAGE_PRESENT	0x00001	/* S: PTE contains a translation */
+#define _PAGE_USER	0x00002	/* S: User page (maps to UR) */
+#define _PAGE_FILE	0x00002	/* S: when !present: nonlinear file mapping */
+#define _PAGE_RW	0x00004	/* S: Write permission (SW) */
+#define _PAGE_DIRTY	0x00008	/* S: Page dirty */
+#define _PAGE_HWEXEC	0x00010	/* H: SX permission */
+#define _PAGE_ACCESSED	0x00020	/* S: Page referenced */
+
+#define _PAGE_ENDIAN	0x00040	/* H: E bit */
+#define _PAGE_GUARDED	0x00080	/* H: G bit */
+#define _PAGE_COHERENT	0x00100	/* H: M bit */
+#define _PAGE_NO_CACHE	0x00200	/* H: I bit */
+#define _PAGE_WRITETHRU	0x00400	/* H: W bit */
+
+#ifdef CONFIG_PTE_64BIT
+/* ERPN in a PTE never gets cleared, ignore it */
+#define _PTE_NONE_MASK	0xffffffffffff0000ULL
+#endif
+
+#define _PMD_PRESENT	0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD	(~PAGE_MASK)
+
+#elif defined(CONFIG_8xx)
+/* Definitions for 8xx embedded chips. */
+#define _PAGE_PRESENT	0x0001	/* Page is valid */
+#define _PAGE_FILE	0x0002	/* when !present: nonlinear file mapping */
+#define _PAGE_NO_CACHE	0x0002	/* I: cache inhibit */
+#define _PAGE_SHARED	0x0004	/* No ASID (context) compare */
+
+/* These five software bits must be masked out when the entry is loaded
+ * into the TLB.
+ */
+#define _PAGE_EXEC	0x0008	/* software: i-cache coherency required */
+#define _PAGE_GUARDED	0x0010	/* software: guarded access */
+#define _PAGE_DIRTY	0x0020	/* software: page changed */
+#define _PAGE_RW	0x0040	/* software: user write access allowed */
+#define _PAGE_ACCESSED	0x0080	/* software: page referenced */
+
+/* Setting any bits in the nibble with the follow two controls will
+ * require a TLB exception handler change.  It is assumed unused bits
+ * are always zero.
+ */
+#define _PAGE_HWWRITE	0x0100	/* h/w write enable: never set in Linux PTE */
+#define _PAGE_USER	0x0800	/* One of the PP bits, the other is USER&~RW */
+
+#define _PMD_PRESENT	0x0001
+#define _PMD_BAD	0x0ff0
+#define _PMD_PAGE_MASK	0x000c
+#define _PMD_PAGE_8M	0x000c
+
+#define _PTE_NONE_MASK _PAGE_ACCESSED
+
+/* Until my rework is finished, 8xx still needs atomic PTE updates */
+#define PTE_ATOMIC_UPDATES	1
+
+#else /* CONFIG_6xx */
+/* Definitions for 60x, 740/750, etc. */
+#define _PAGE_PRESENT	0x001	/* software: pte contains a translation */
+#define _PAGE_HASHPTE	0x002	/* hash_page has made an HPTE for this pte */
+#define _PAGE_FILE	0x004	/* when !present: nonlinear file mapping */
+#define _PAGE_USER	0x004	/* usermode access allowed */
+#define _PAGE_GUARDED	0x008	/* G: prohibit speculative access */
+#define _PAGE_COHERENT	0x010	/* M: enforce memory coherence (SMP systems) */
+#define _PAGE_NO_CACHE	0x020	/* I: cache inhibit */
+#define _PAGE_WRITETHRU	0x040	/* W: cache write-through */
+#define _PAGE_DIRTY	0x080	/* C: page changed */
+#define _PAGE_ACCESSED	0x100	/* R: page referenced */
+#define _PAGE_EXEC	0x200	/* software: i-cache coherency required */
+#define _PAGE_RW	0x400	/* software: user write access allowed */
+
+#define _PTE_NONE_MASK	_PAGE_HASHPTE
+
+#define _PMD_PRESENT	0
+#define _PMD_PRESENT_MASK (PAGE_MASK)
+#define _PMD_BAD	(~PAGE_MASK)
+
+/* Hash table based platforms need atomic updates of the linux PTE */
+#define PTE_ATOMIC_UPDATES	1
+
+#endif
+
+/*
+ * Some bits are only used on some cpu families...
+ */
+#ifndef _PAGE_HASHPTE
+#define _PAGE_HASHPTE	0
+#endif
+#ifndef _PTE_NONE_MASK
+#define _PTE_NONE_MASK 0
+#endif
+#ifndef _PAGE_SHARED
+#define _PAGE_SHARED	0
+#endif
+#ifndef _PAGE_HWWRITE
+#define _PAGE_HWWRITE	0
+#endif
+#ifndef _PAGE_HWEXEC
+#define _PAGE_HWEXEC	0
+#endif
+#ifndef _PAGE_EXEC
+#define _PAGE_EXEC	0
+#endif
+#ifndef _PAGE_ENDIAN
+#define _PAGE_ENDIAN	0
+#endif
+#ifndef _PAGE_COHERENT
+#define _PAGE_COHERENT	0
+#endif
+#ifndef _PAGE_WRITETHRU
+#define _PAGE_WRITETHRU	0
+#endif
+#ifndef _PMD_PRESENT_MASK
+#define _PMD_PRESENT_MASK	_PMD_PRESENT
+#endif
+#ifndef _PMD_SIZE
+#define _PMD_SIZE	0
+#define PMD_PAGE_SIZE(pmd)	bad_call_to_PMD_PAGE_SIZE()
+#endif
+
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+
+#define PAGE_PROT_BITS	__pgprot(_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \
+				 _PAGE_WRITETHRU | _PAGE_ENDIAN | \
+				 _PAGE_USER | _PAGE_ACCESSED | \
+				 _PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \
+				 _PAGE_EXEC | _PAGE_HWEXEC)
+/*
+ * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
+ * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
+ * to have it in the Linux PTE, and in fact the bit could be reused for
+ * another purpose.  -- paulus.
+ */
+
+#ifdef CONFIG_44x
+#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED)
+#else
+#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED)
+#endif
+#define _PAGE_WRENABLE	(_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
+#define _PAGE_KERNEL	(_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE)
+
+#ifdef CONFIG_PPC_STD_MMU
+/* On standard PPC MMU, no user access implies kernel read/write access,
+ * so to write-protect kernel memory we must turn on user access */
+#define _PAGE_KERNEL_RO	(_PAGE_BASE | _PAGE_SHARED | _PAGE_USER)
+#else
+#define _PAGE_KERNEL_RO	(_PAGE_BASE | _PAGE_SHARED)
+#endif
+
+#define _PAGE_IO	(_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
+#define _PAGE_RAM	(_PAGE_KERNEL | _PAGE_HWEXEC)
+
+#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
+	defined(CONFIG_KPROBES)
+/* We want the debuggers to be able to set breakpoints anywhere, so
+ * don't write protect the kernel text */
+#define _PAGE_RAM_TEXT	_PAGE_RAM
+#else
+#define _PAGE_RAM_TEXT	(_PAGE_KERNEL_RO | _PAGE_HWEXEC)
+#endif
+
+#define PAGE_NONE	__pgprot(_PAGE_BASE)
+#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
+#define PAGE_SHARED_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
+#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+
+#define PAGE_KERNEL		__pgprot(_PAGE_RAM)
+#define PAGE_KERNEL_NOCACHE	__pgprot(_PAGE_IO)
+
+/*
+ * The PowerPC can only do execute protection on a segment (256MB) basis,
+ * not on a page basis.  So we consider execute permission the same as read.
+ * Also, write permissions imply read permissions.
+ * This is the closest we can get..
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY_X
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY_X
+#define __P100	PAGE_READONLY
+#define __P101	PAGE_READONLY_X
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY_X
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY_X
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED_X
+#define __S100	PAGE_READONLY
+#define __S101	PAGE_READONLY_X
+#define __S110	PAGE_SHARED
+#define __S111	PAGE_SHARED_X
+
+#ifndef __ASSEMBLY__
+/* Make sure we get a link error if PMD_PAGE_SIZE is ever called on a
+ * kernel without large page PMD support */
+extern unsigned long bad_call_to_PMD_PAGE_SIZE(void);
+
+/*
+ * Conversions between PTE values and page frame numbers.
+ */
+
+/* in some case we want to additionaly adjust where the pfn is in the pte to
+ * allow room for more flags */
+#if defined(CONFIG_FSL_BOOKE) && defined(CONFIG_PTE_64BIT)
+#define PFN_SHIFT_OFFSET	(PAGE_SHIFT + 8)
+#else
+#define PFN_SHIFT_OFFSET	(PAGE_SHIFT)
+#endif
+
+#define pte_pfn(x)		(pte_val(x) >> PFN_SHIFT_OFFSET)
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+
+#define pfn_pte(pfn, prot)	__pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) |\
+					pgprot_val(prot))
+#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
+#endif /* __ASSEMBLY__ */
+
+#define pte_none(pte)		((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,ptep)	do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
+
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define	pmd_bad(pmd)		(pmd_val(pmd) & _PMD_BAD)
+#define	pmd_present(pmd)	(pmd_val(pmd) & _PMD_PRESENT_MASK)
+#define	pmd_clear(pmdp)		do { pmd_val(*(pmdp)) = 0; } while (0)
+
+#ifndef __ASSEMBLY__
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_write(pte_t pte)		{ return pte_val(pte) & _PAGE_RW; }
+static inline int pte_dirty(pte_t pte)		{ return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)		{ return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)		{ return pte_val(pte) & _PAGE_FILE; }
+static inline int pte_special(pte_t pte)	{ return 0; }
+
+static inline void pte_uncache(pte_t pte)       { pte_val(pte) |= _PAGE_NO_CACHE; }
+static inline void pte_cache(pte_t pte)         { pte_val(pte) &= ~_PAGE_NO_CACHE; }
+
+static inline pte_t pte_wrprotect(pte_t pte) {
+	pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_mkclean(pte_t pte) {
+	pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
+static inline pte_t pte_mkold(pte_t pte) {
+	pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+
+static inline pte_t pte_mkwrite(pte_t pte) {
+	pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) {
+	pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) {
+	pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkspecial(pte_t pte) {
+	return pte; }
+static inline unsigned long pte_pgprot(pte_t pte)
+{
+	return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
+}
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+	return pte;
+}
+
+/*
+ * When flushing the tlb entry for a page, we also need to flush the hash
+ * table entry.  flush_hash_pages is assembler (for speed) in hashtable.S.
+ */
+extern int flush_hash_pages(unsigned context, unsigned long va,
+			    unsigned long pmdval, int count);
+
+/* Add an HPTE to the hash table */
+extern void add_hash_page(unsigned context, unsigned long va,
+			  unsigned long pmdval);
+
+/*
+ * Atomic PTE updates.
+ *
+ * pte_update clears and sets bit atomically, and returns
+ * the old pte value.  In the 64-bit PTE case we lock around the
+ * low PTE word since we expect ALL flag bits to be there
+ */
+#ifndef CONFIG_PTE_64BIT
+static inline unsigned long pte_update(pte_t *p,
+				       unsigned long clr,
+				       unsigned long set)
+{
+#ifdef PTE_ATOMIC_UPDATES
+	unsigned long old, tmp;
+
+	__asm__ __volatile__("\
+1:	lwarx	%0,0,%3\n\
+	andc	%1,%0,%4\n\
+	or	%1,%1,%5\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%1,0,%3\n\
+	bne-	1b"
+	: "=&r" (old), "=&r" (tmp), "=m" (*p)
+	: "r" (p), "r" (clr), "r" (set), "m" (*p)
+	: "cc" );
+#else /* PTE_ATOMIC_UPDATES */
+	unsigned long old = pte_val(*p);
+	*p = __pte((old & ~clr) | set);
+#endif /* !PTE_ATOMIC_UPDATES */
+
+#ifdef CONFIG_44x
+	if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+		icache_44x_need_flush = 1;
+#endif
+	return old;
+}
+#else /* CONFIG_PTE_64BIT */
+/* TODO: Change that to only modify the low word and move set_pte_at()
+ * out of line
+ */
+static inline unsigned long long pte_update(pte_t *p,
+					    unsigned long clr,
+					    unsigned long set)
+{
+#ifdef PTE_ATOMIC_UPDATES
+	unsigned long long old;
+	unsigned long tmp;
+
+	__asm__ __volatile__("\
+1:	lwarx	%L0,0,%4\n\
+	lwzx	%0,0,%3\n\
+	andc	%1,%L0,%5\n\
+	or	%1,%1,%6\n"
+	PPC405_ERR77(0,%3)
+"	stwcx.	%1,0,%4\n\
+	bne-	1b"
+	: "=&r" (old), "=&r" (tmp), "=m" (*p)
+	: "r" (p), "r" ((unsigned long)(p) + 4), "r" (clr), "r" (set), "m" (*p)
+	: "cc" );
+#else /* PTE_ATOMIC_UPDATES */
+	unsigned long long old = pte_val(*p);
+	*p = __pte((old & ~(unsigned long long)clr) | set);
+#endif /* !PTE_ATOMIC_UPDATES */
+
+#ifdef CONFIG_44x
+	if ((old & _PAGE_USER) && (old & _PAGE_HWEXEC))
+		icache_44x_need_flush = 1;
+#endif
+	return old;
+}
+#endif /* CONFIG_PTE_64BIT */
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ * On machines which use an MMU hash table we avoid changing the
+ * _PAGE_HASHPTE bit.
+ */
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pte)
+{
+#if _PAGE_HASHPTE != 0
+	pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE);
+#else
+	*ptep = pte;
+#endif
+}
+
+/*
+ * 2.6 calls this without flushing the TLB entry; this is wrong
+ * for our hash-based implementation, we fix that up here.
+ */
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+static inline int __ptep_test_and_clear_young(unsigned int context, unsigned long addr, pte_t *ptep)
+{
+	unsigned long old;
+	old = pte_update(ptep, _PAGE_ACCESSED, 0);
+#if _PAGE_HASHPTE != 0
+	if (old & _PAGE_HASHPTE) {
+		unsigned long ptephys = __pa(ptep) & PAGE_MASK;
+		flush_hash_pages(context, addr, ptephys, 1);
+	}
+#endif
+	return (old & _PAGE_ACCESSED) != 0;
+}
+#define ptep_test_and_clear_young(__vma, __addr, __ptep) \
+	__ptep_test_and_clear_young((__vma)->vm_mm->context.id, __addr, __ptep)
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+				       pte_t *ptep)
+{
+	return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
+}
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
+				      pte_t *ptep)
+{
+	pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
+}
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	ptep_set_wrprotect(mm, addr, ptep);
+}
+
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
+{
+	unsigned long bits = pte_val(entry) &
+		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW);
+	pte_update(ptep, 0, bits);
+}
+
+#define  ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+({									   \
+	int __changed = !pte_same(*(__ptep), __entry);			   \
+	if (__changed) {						   \
+		__ptep_set_access_flags(__ptep, __entry, __dirty);         \
+		flush_tlb_page_nohash(__vma, __address);		   \
+	}								   \
+	__changed;							   \
+})
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+#define __HAVE_ARCH_PTE_SAME
+#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
+
+/*
+ * Note that on Book E processors, the pmd contains the kernel virtual
+ * (lowmem) address of the pte page.  The physical address is less useful
+ * because everything runs with translation enabled (even the TLB miss
+ * handler).  On everything else the pmd contains the physical address
+ * of the pte page.  -- paulus
+ */
+#ifndef CONFIG_BOOKE
+#define pmd_page_vaddr(pmd)	\
+	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd)		\
+	(mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
+#else
+#define pmd_page_vaddr(pmd)	\
+	((unsigned long) (pmd_val(pmd) & PAGE_MASK))
+#define pmd_page(pmd)		\
+	pfn_to_page((__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+#endif
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(address)	 ((address) >> PGDIR_SHIFT)
+#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address)		\
+	(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, addr)	\
+	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(addr))
+#define pte_offset_map(dir, addr)		\
+	((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr))
+#define pte_offset_map_nested(dir, addr)	\
+	((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr))
+
+#define pte_unmap(pte)		kunmap_atomic(pte, KM_PTE0)
+#define pte_unmap_nested(pte)	kunmap_atomic(pte, KM_PTE1)
+
+/*
+ * Encode and decode a swap entry.
+ * Note that the bits we use in a PTE for representing a swap entry
+ * must not include the _PAGE_PRESENT bit, the _PAGE_FILE bit, or the
+ *_PAGE_HASHPTE bit (if used).  -- paulus
+ */
+#define __swp_type(entry)		((entry).val & 0x1f)
+#define __swp_offset(entry)		((entry).val >> 5)
+#define __swp_entry(type, offset)	((swp_entry_t) { (type) | ((offset) << 5) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) >> 3 })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val << 3 })
+
+/* Encode and decode a nonlinear file mapping entry */
+#define PTE_FILE_MAX_BITS	29
+#define pte_to_pgoff(pte)	(pte_val(pte) >> 3)
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 3) | _PAGE_FILE })
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+extern int get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep,
+		      pmd_t **pmdp);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PGTABLE_PPC32_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
new file mode 100644
index 000000000000..db0b8f3b8807
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -0,0 +1,468 @@
+#ifndef _ASM_POWERPC_PGTABLE_PPC64_H_
+#define _ASM_POWERPC_PGTABLE_PPC64_H_
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the ppc64 hashed page table.
+ */
+
+#ifndef __ASSEMBLY__
+#include <linux/stddef.h>
+#include <asm/tlbflush.h>
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_PPC_64K_PAGES
+#include <asm/pgtable-64k.h>
+#else
+#include <asm/pgtable-4k.h>
+#endif
+
+#define FIRST_USER_ADDRESS	0
+
+/*
+ * Size of EA range mapped by our pagetables.
+ */
+#define PGTABLE_EADDR_SIZE (PTE_INDEX_SIZE + PMD_INDEX_SIZE + \
+                	    PUD_INDEX_SIZE + PGD_INDEX_SIZE + PAGE_SHIFT)
+#define PGTABLE_RANGE (ASM_CONST(1) << PGTABLE_EADDR_SIZE)
+
+#if TASK_SIZE_USER64 > PGTABLE_RANGE
+#error TASK_SIZE_USER64 exceeds pagetable range
+#endif
+
+#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
+#error TASK_SIZE_USER64 exceeds user VSID range
+#endif
+
+
+/*
+ * Define the address range of the vmalloc VM area.
+ */
+#define VMALLOC_START ASM_CONST(0xD000000000000000)
+#define VMALLOC_SIZE  (PGTABLE_RANGE >> 1)
+#define VMALLOC_END   (VMALLOC_START + VMALLOC_SIZE)
+
+/*
+ * Define the address ranges for MMIO and IO space :
+ *
+ *  ISA_IO_BASE = VMALLOC_END, 64K reserved area
+ *  PHB_IO_BASE = ISA_IO_BASE + 64K to ISA_IO_BASE + 2G, PHB IO spaces
+ * IOREMAP_BASE = ISA_IO_BASE + 2G to VMALLOC_START + PGTABLE_RANGE
+ */
+#define FULL_IO_SIZE	0x80000000ul
+#define  ISA_IO_BASE	(VMALLOC_END)
+#define  ISA_IO_END	(VMALLOC_END + 0x10000ul)
+#define  PHB_IO_BASE	(ISA_IO_END)
+#define  PHB_IO_END	(VMALLOC_END + FULL_IO_SIZE)
+#define IOREMAP_BASE	(PHB_IO_END)
+#define IOREMAP_END	(VMALLOC_START + PGTABLE_RANGE)
+
+/*
+ * Region IDs
+ */
+#define REGION_SHIFT		60UL
+#define REGION_MASK		(0xfUL << REGION_SHIFT)
+#define REGION_ID(ea)		(((unsigned long)(ea)) >> REGION_SHIFT)
+
+#define VMALLOC_REGION_ID	(REGION_ID(VMALLOC_START))
+#define KERNEL_REGION_ID	(REGION_ID(PAGE_OFFSET))
+#define VMEMMAP_REGION_ID	(0xfUL)
+#define USER_REGION_ID		(0UL)
+
+/*
+ * Defines the address of the vmemap area, in its own region
+ */
+#define VMEMMAP_BASE		(VMEMMAP_REGION_ID << REGION_SHIFT)
+#define vmemmap			((struct page *)VMEMMAP_BASE)
+
+
+/*
+ * Common bits in a linux-style PTE.  These match the bits in the
+ * (hardware-defined) PowerPC PTE as closely as possible. Additional
+ * bits may be defined in pgtable-*.h
+ */
+#define _PAGE_PRESENT	0x0001 /* software: pte contains a translation */
+#define _PAGE_USER	0x0002 /* matches one of the PP bits */
+#define _PAGE_FILE	0x0002 /* (!present only) software: pte holds file offset */
+#define _PAGE_EXEC	0x0004 /* No execute on POWER4 and newer (we invert) */
+#define _PAGE_GUARDED	0x0008
+#define _PAGE_COHERENT	0x0010 /* M: enforce memory coherence (SMP systems) */
+#define _PAGE_NO_CACHE	0x0020 /* I: cache inhibit */
+#define _PAGE_WRITETHRU	0x0040 /* W: cache write-through */
+#define _PAGE_DIRTY	0x0080 /* C: page changed */
+#define _PAGE_ACCESSED	0x0100 /* R: page referenced */
+#define _PAGE_RW	0x0200 /* software: user write access allowed */
+#define _PAGE_BUSY	0x0800 /* software: PTE & hash are busy */
+
+/* Strong Access Ordering */
+#define _PAGE_SAO	(_PAGE_WRITETHRU | _PAGE_NO_CACHE | _PAGE_COHERENT)
+
+#define _PAGE_BASE	(_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT)
+
+#define _PAGE_WRENABLE	(_PAGE_RW | _PAGE_DIRTY)
+
+/* __pgprot defined in arch/powerpc/incliude/asm/page.h */
+#define PAGE_NONE	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
+
+#define PAGE_SHARED	__pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER)
+#define PAGE_SHARED_X	__pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_COPY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_COPY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_READONLY	__pgprot(_PAGE_BASE | _PAGE_USER)
+#define PAGE_READONLY_X	__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
+#define PAGE_KERNEL	__pgprot(_PAGE_BASE | _PAGE_WRENABLE)
+#define PAGE_KERNEL_CI	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+			       _PAGE_WRENABLE | _PAGE_NO_CACHE | _PAGE_GUARDED)
+#define PAGE_KERNEL_EXEC __pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_EXEC)
+
+#define PAGE_AGP	__pgprot(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_NO_CACHE)
+#define HAVE_PAGE_AGP
+
+#define PAGE_PROT_BITS	__pgprot(_PAGE_GUARDED | _PAGE_COHERENT | \
+				 _PAGE_NO_CACHE | _PAGE_WRITETHRU | \
+				 _PAGE_4K_PFN | _PAGE_RW | _PAGE_USER | \
+ 				 _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_EXEC)
+/* PTEIDX nibble */
+#define _PTEIDX_SECONDARY	0x8
+#define _PTEIDX_GROUP_IX	0x7
+
+
+/*
+ * POWER4 and newer have per page execute protection, older chips can only
+ * do this on a segment (256MB) basis.
+ *
+ * Also, write permissions imply read permissions.
+ * This is the closest we can get..
+ *
+ * Note due to the way vm flags are laid out, the bits are XWR
+ */
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_READONLY_X
+#define __P101	PAGE_READONLY_X
+#define __P110	PAGE_COPY_X
+#define __P111	PAGE_COPY_X
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_SHARED
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_READONLY_X
+#define __S101	PAGE_READONLY_X
+#define __S110	PAGE_SHARED_X
+#define __S111	PAGE_SHARED_X
+
+#ifdef CONFIG_HUGETLB_PAGE
+
+#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * mk_pte takes a (struct page *) as input
+ */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t pgprot)
+{
+	pte_t pte;
+
+
+	pte_val(pte) = (pfn << PTE_RPN_SHIFT) | pgprot_val(pgprot);
+	return pte;
+}
+
+#define pte_modify(_pte, newprot) \
+  (__pte((pte_val(_pte) & _PAGE_CHG_MASK) | pgprot_val(newprot)))
+
+#define pte_none(pte)		((pte_val(pte) & ~_PAGE_HPTEFLAGS) == 0)
+#define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
+
+/* pte_clear moved to later in this file */
+
+#define pte_pfn(x)		((unsigned long)((pte_val(x)>>PTE_RPN_SHIFT)))
+#define pte_page(x)		pfn_to_page(pte_pfn(x))
+
+#define PMD_BAD_BITS		(PTE_TABLE_SIZE-1)
+#define PUD_BAD_BITS		(PMD_TABLE_SIZE-1)
+
+#define pmd_set(pmdp, pmdval) 	(pmd_val(*(pmdp)) = (pmdval))
+#define pmd_none(pmd)		(!pmd_val(pmd))
+#define	pmd_bad(pmd)		(!is_kernel_addr(pmd_val(pmd)) \
+				 || (pmd_val(pmd) & PMD_BAD_BITS))
+#define	pmd_present(pmd)	(pmd_val(pmd) != 0)
+#define	pmd_clear(pmdp)		(pmd_val(*(pmdp)) = 0)
+#define pmd_page_vaddr(pmd)	(pmd_val(pmd) & ~PMD_MASKED_BITS)
+#define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
+
+#define pud_set(pudp, pudval)	(pud_val(*(pudp)) = (pudval))
+#define pud_none(pud)		(!pud_val(pud))
+#define	pud_bad(pud)		(!is_kernel_addr(pud_val(pud)) \
+				 || (pud_val(pud) & PUD_BAD_BITS))
+#define pud_present(pud)	(pud_val(pud) != 0)
+#define pud_clear(pudp)		(pud_val(*(pudp)) = 0)
+#define pud_page_vaddr(pud)	(pud_val(pud) & ~PUD_MASKED_BITS)
+#define pud_page(pud)		virt_to_page(pud_page_vaddr(pud))
+
+#define pgd_set(pgdp, pudp)	({pgd_val(*(pgdp)) = (unsigned long)(pudp);})
+
+/*
+ * Find an entry in a page-table-directory.  We combine the address region
+ * (the high order N bits) and the pgd portion of the address.
+ */
+/* to avoid overflow in free_pgtables we don't use PTRS_PER_PGD here */
+#define pgd_index(address) (((address) >> (PGDIR_SHIFT)) & 0x1ff)
+
+#define pgd_offset(mm, address)	 ((mm)->pgd + pgd_index(address))
+
+#define pmd_offset(pudp,addr) \
+  (((pmd_t *) pud_page_vaddr(*(pudp))) + (((addr) >> PMD_SHIFT) & (PTRS_PER_PMD - 1)))
+
+#define pte_offset_kernel(dir,addr) \
+  (((pte_t *) pmd_page_vaddr(*(dir))) + (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
+
+#define pte_offset_map(dir,addr)	pte_offset_kernel((dir), (addr))
+#define pte_offset_map_nested(dir,addr)	pte_offset_kernel((dir), (addr))
+#define pte_unmap(pte)			do { } while(0)
+#define pte_unmap_nested(pte)		do { } while(0)
+
+/* to find an entry in a kernel page-table-directory */
+/* This now only contains the vmalloc pages */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW;}
+static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY;}
+static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED;}
+static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE;}
+static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; }
+
+static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
+static inline void pte_cache(pte_t pte)   { pte_val(pte) &= ~_PAGE_NO_CACHE; }
+
+static inline pte_t pte_wrprotect(pte_t pte) {
+	pte_val(pte) &= ~(_PAGE_RW); return pte; }
+static inline pte_t pte_mkclean(pte_t pte) {
+	pte_val(pte) &= ~(_PAGE_DIRTY); return pte; }
+static inline pte_t pte_mkold(pte_t pte) {
+	pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte) {
+	pte_val(pte) |= _PAGE_RW; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte) {
+	pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte) {
+	pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkhuge(pte_t pte) {
+	return pte; }
+static inline pte_t pte_mkspecial(pte_t pte) {
+	pte_val(pte) |= _PAGE_SPECIAL; return pte; }
+static inline unsigned long pte_pgprot(pte_t pte)
+{
+	return __pgprot(pte_val(pte)) & PAGE_PROT_BITS;
+}
+
+/* Atomic PTE updates */
+static inline unsigned long pte_update(struct mm_struct *mm,
+				       unsigned long addr,
+				       pte_t *ptep, unsigned long clr,
+				       int huge)
+{
+	unsigned long old, tmp;
+
+	__asm__ __volatile__(
+	"1:	ldarx	%0,0,%3		# pte_update\n\
+	andi.	%1,%0,%6\n\
+	bne-	1b \n\
+	andc	%1,%0,%4 \n\
+	stdcx.	%1,0,%3 \n\
+	bne-	1b"
+	: "=&r" (old), "=&r" (tmp), "=m" (*ptep)
+	: "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY)
+	: "cc" );
+
+	if (old & _PAGE_HASHPTE)
+		hpte_need_flush(mm, addr, ptep, old, huge);
+	return old;
+}
+
+static inline int __ptep_test_and_clear_young(struct mm_struct *mm,
+					      unsigned long addr, pte_t *ptep)
+{
+	unsigned long old;
+
+       	if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
+		return 0;
+	old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0);
+	return (old & _PAGE_ACCESSED) != 0;
+}
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+#define ptep_test_and_clear_young(__vma, __addr, __ptep)		   \
+({									   \
+	int __r;							   \
+	__r = __ptep_test_and_clear_young((__vma)->vm_mm, __addr, __ptep); \
+	__r;								   \
+})
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
+				      pte_t *ptep)
+{
+	unsigned long old;
+
+       	if ((pte_val(*ptep) & _PAGE_RW) == 0)
+       		return;
+	old = pte_update(mm, addr, ptep, _PAGE_RW, 0);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	unsigned long old;
+
+	if ((pte_val(*ptep) & _PAGE_RW) == 0)
+		return;
+	old = pte_update(mm, addr, ptep, _PAGE_RW, 1);
+}
+
+/*
+ * We currently remove entries from the hashtable regardless of whether
+ * the entry was young or dirty. The generic routines only flush if the
+ * entry was young or dirty which is not good enough.
+ *
+ * We should be more intelligent about this but for the moment we override
+ * these functions and force a tlb flush unconditionally
+ */
+#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+#define ptep_clear_flush_young(__vma, __address, __ptep)		\
+({									\
+	int __young = __ptep_test_and_clear_young((__vma)->vm_mm, __address, \
+						  __ptep);		\
+	__young;							\
+})
+
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
+				       unsigned long addr, pte_t *ptep)
+{
+	unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0);
+	return __pte(old);
+}
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
+			     pte_t * ptep)
+{
+	pte_update(mm, addr, ptep, ~0UL, 0);
+}
+
+/*
+ * set_pte stores a linux PTE into the linux page table.
+ */
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pte)
+{
+	if (pte_present(*ptep))
+		pte_clear(mm, addr, ptep);
+	pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
+	*ptep = pte;
+}
+
+/* Set the dirty and/or accessed bits atomically in a linux PTE, this
+ * function doesn't need to flush the hash entry
+ */
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
+{
+	unsigned long bits = pte_val(entry) &
+		(_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC);
+	unsigned long old, tmp;
+
+	__asm__ __volatile__(
+	"1:	ldarx	%0,0,%4\n\
+		andi.	%1,%0,%6\n\
+		bne-	1b \n\
+		or	%0,%3,%0\n\
+		stdcx.	%0,0,%4\n\
+		bne-	1b"
+	:"=&r" (old), "=&r" (tmp), "=m" (*ptep)
+	:"r" (bits), "r" (ptep), "m" (*ptep), "i" (_PAGE_BUSY)
+	:"cc");
+}
+#define  ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+({									   \
+	int __changed = !pte_same(*(__ptep), __entry);			   \
+	if (__changed) {						   \
+		__ptep_set_access_flags(__ptep, __entry, __dirty);    	   \
+		flush_tlb_page_nohash(__vma, __address);		   \
+	}								   \
+	__changed;							   \
+})
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+				     unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
+#define __HAVE_ARCH_PTE_SAME
+#define pte_same(A,B)	(((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0)
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/* Encode and de-code a swap entry */
+#define __swp_type(entry)	(((entry).val >> 1) & 0x3f)
+#define __swp_offset(entry)	((entry).val >> 8)
+#define __swp_entry(type, offset) ((swp_entry_t){((type)<< 1)|((offset)<<8)})
+#define __pte_to_swp_entry(pte)	((swp_entry_t){pte_val(pte) >> PTE_RPN_SHIFT})
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val << PTE_RPN_SHIFT })
+#define pte_to_pgoff(pte)	(pte_val(pte) >> PTE_RPN_SHIFT)
+#define pgoff_to_pte(off)	((pte_t) {((off) << PTE_RPN_SHIFT)|_PAGE_FILE})
+#define PTE_FILE_MAX_BITS	(BITS_PER_LONG - PTE_RPN_SHIFT)
+
+void pgtable_cache_init(void);
+
+/*
+ * find_linux_pte returns the address of a linux pte for a given
+ * effective address and directory.  If not found, it returns zero.
+ */static inline pte_t *find_linux_pte(pgd_t *pgdir, unsigned long ea)
+{
+	pgd_t *pg;
+	pud_t *pu;
+	pmd_t *pm;
+	pte_t *pt = NULL;
+
+	pg = pgdir + pgd_index(ea);
+	if (!pgd_none(*pg)) {
+		pu = pud_offset(pg, ea);
+		if (!pud_none(*pu)) {
+			pm = pmd_offset(pu, ea);
+			if (pmd_present(*pm))
+				pt = pte_offset_kernel(pm, ea);
+		}
+	}
+	return pt;
+}
+
+pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long address);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PGTABLE_PPC64_H_ */
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
new file mode 100644
index 000000000000..dbb8ca172e44
--- /dev/null
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -0,0 +1,57 @@
+#ifndef _ASM_POWERPC_PGTABLE_H
+#define _ASM_POWERPC_PGTABLE_H
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>		/* For TASK_SIZE */
+#include <asm/mmu.h>
+#include <asm/page.h>
+struct mm_struct;
+#endif /* !__ASSEMBLY__ */
+
+#if defined(CONFIG_PPC64)
+#  include <asm/pgtable-ppc64.h>
+#else
+#  include <asm/pgtable-ppc32.h>
+#endif
+
+#ifndef __ASSEMBLY__
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+extern pgd_t swapper_pg_dir[];
+
+extern void paging_init(void);
+
+/*
+ * kern_addr_valid is intended to indicate whether an address is a valid
+ * kernel address.  Most 32-bit archs define it as always true (like this)
+ * but most 64-bit archs actually perform a test.  What should we do here?
+ */
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#include <asm-generic/pgtable.h>
+
+
+/*
+ * This gets called at the end of handling a page fault, when
+ * the kernel has put a new PTE into the page table for the process.
+ * We use it to ensure coherency between the i-cache and d-cache
+ * for the page which has just been mapped in.
+ * On machines which use an MMU hash table, we use this to put a
+ * corresponding HPTE into the hash table ahead of time, instead of
+ * waiting for the inevitable extra hash-table miss exception.
+ */
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PGTABLE_H */
diff --git a/arch/powerpc/include/asm/phyp_dump.h b/arch/powerpc/include/asm/phyp_dump.h
new file mode 100644
index 000000000000..fa74c6c3e106
--- /dev/null
+++ b/arch/powerpc/include/asm/phyp_dump.h
@@ -0,0 +1,47 @@
+/*
+ * Hypervisor-assisted dump
+ *
+ * Linas Vepstas, Manish Ahuja 2008
+ * Copyright 2008 IBM Corp.
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _PPC64_PHYP_DUMP_H
+#define _PPC64_PHYP_DUMP_H
+
+#ifdef CONFIG_PHYP_DUMP
+
+/* The RMR region will be saved for later dumping
+ * whenever the kernel crashes. Set this to 256MB. */
+#define PHYP_DUMP_RMR_START 0x0
+#define PHYP_DUMP_RMR_END   (1UL<<28)
+
+struct phyp_dump {
+	/* Memory that is reserved during very early boot. */
+	unsigned long init_reserve_start;
+	unsigned long init_reserve_size;
+	/* cmd line options during boot */
+	unsigned long reserve_bootvar;
+	unsigned long phyp_dump_at_boot;
+	/* Check status during boot if dump supported, active & present*/
+	unsigned long phyp_dump_configured;
+	unsigned long phyp_dump_is_active;
+	/* store cpu & hpte size */
+	unsigned long cpu_state_size;
+	unsigned long hpte_region_size;
+	/* previous scratch area values */
+	unsigned long reserved_scratch_addr;
+	unsigned long reserved_scratch_size;
+};
+
+extern struct phyp_dump *phyp_dump_info;
+
+int early_init_dt_scan_phyp_dump(unsigned long node,
+		const char *uname, int depth, void *data);
+
+#endif /* CONFIG_PHYP_DUMP */
+#endif /* _PPC64_PHYP_DUMP_H */
diff --git a/arch/powerpc/include/asm/pmac_feature.h b/arch/powerpc/include/asm/pmac_feature.h
new file mode 100644
index 000000000000..877c35a4356e
--- /dev/null
+++ b/arch/powerpc/include/asm/pmac_feature.h
@@ -0,0 +1,405 @@
+/*
+ * Definition of platform feature hooks for PowerMacs
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Paul Mackerras &
+ *                    Ben. Herrenschmidt.
+ *
+ *
+ * Note: I removed media-bay details from the feature stuff, I believe it's
+ *       not worth it, the media-bay driver can directly use the mac-io
+ *       ASIC registers.
+ *
+ * Implementation note: Currently, none of these functions will block.
+ * However, they may internally protect themselves with a spinlock
+ * for way too long. Be prepared for at least some of these to block
+ * in the future.
+ *
+ * Unless specifically defined, the result code is assumed to be an
+ * error when negative, 0 is the default success result. Some functions
+ * may return additional positive result values.
+ *
+ * To keep implementation simple, all feature calls are assumed to have
+ * the prototype parameters (struct device_node* node, int value).
+ * When either is not used, pass 0.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_PMAC_FEATURE_H
+#define __ASM_POWERPC_PMAC_FEATURE_H
+
+#include <asm/macio.h>
+#include <asm/machdep.h>
+
+/*
+ * Known Mac motherboard models
+ *
+ * Please, report any error here to benh@kernel.crashing.org, thanks !
+ *
+ * Note that I don't fully maintain this list for Core99 & MacRISC2
+ * and I'm considering removing all NewWorld entries from it and
+ * entirely rely on the model string.
+ */
+
+/* PowerSurge are the first generation of PCI Pmacs. This include
+ * all of the Grand-Central based machines. We currently don't
+ * differenciate most of them.
+ */
+#define PMAC_TYPE_PSURGE		0x10	/* PowerSurge */
+#define PMAC_TYPE_ANS			0x11	/* Apple Network Server */
+
+/* Here is the infamous serie of OHare based machines
+ */
+#define PMAC_TYPE_COMET			0x20	/* Beleived to be PowerBook 2400 */
+#define PMAC_TYPE_HOOPER		0x21	/* Beleived to be PowerBook 3400 */
+#define PMAC_TYPE_KANGA			0x22	/* PowerBook 3500 (first G3) */
+#define PMAC_TYPE_ALCHEMY		0x23	/* Alchemy motherboard base */
+#define PMAC_TYPE_GAZELLE		0x24	/* Spartacus, some 5xxx/6xxx */
+#define PMAC_TYPE_UNKNOWN_OHARE		0x2f	/* Unknown, but OHare based */
+
+/* Here are the Heathrow based machines
+ * FIXME: Differenciate wallstreet,mainstreet,wallstreetII
+ */
+#define PMAC_TYPE_GOSSAMER		0x30	/* Gossamer motherboard */
+#define PMAC_TYPE_SILK			0x31	/* Desktop PowerMac G3 */
+#define PMAC_TYPE_WALLSTREET		0x32	/* Wallstreet/Mainstreet PowerBook*/
+#define PMAC_TYPE_UNKNOWN_HEATHROW	0x3f	/* Unknown but heathrow based */
+
+/* Here are newworld machines based on Paddington (heathrow derivative)
+ */
+#define PMAC_TYPE_101_PBOOK		0x40	/* 101 PowerBook (aka Lombard) */
+#define PMAC_TYPE_ORIG_IMAC		0x41	/* First generation iMac */
+#define PMAC_TYPE_YOSEMITE		0x42	/* B&W G3 */
+#define PMAC_TYPE_YIKES			0x43	/* Yikes G4 (PCI graphics) */
+#define PMAC_TYPE_UNKNOWN_PADDINGTON	0x4f	/* Unknown but paddington based */
+
+/* Core99 machines based on UniNorth 1.0 and 1.5
+ *
+ * Note: A single entry here may cover several actual models according
+ * to the device-tree. (Sawtooth is most tower G4s, FW_IMAC is most
+ * FireWire based iMacs, etc...). Those machines are too similar to be
+ * distinguished here, when they need to be differencied, use the
+ * device-tree "model" or "compatible" property.
+ */
+#define PMAC_TYPE_ORIG_IBOOK		0x40	/* First iBook model (no firewire) */
+#define PMAC_TYPE_SAWTOOTH		0x41	/* Desktop G4s */
+#define PMAC_TYPE_FW_IMAC		0x42	/* FireWire iMacs (except Pangea based) */
+#define PMAC_TYPE_FW_IBOOK		0x43	/* FireWire iBooks (except iBook2) */
+#define PMAC_TYPE_CUBE			0x44	/* Cube PowerMac */
+#define PMAC_TYPE_QUICKSILVER		0x45	/* QuickSilver G4s */
+#define PMAC_TYPE_PISMO			0x46	/* Pismo PowerBook */
+#define PMAC_TYPE_TITANIUM		0x47	/* Titanium PowerBook */
+#define PMAC_TYPE_TITANIUM2		0x48	/* Titanium II PowerBook (no L3, M6) */
+#define PMAC_TYPE_TITANIUM3		0x49	/* Titanium III PowerBook (with L3 & M7) */
+#define PMAC_TYPE_TITANIUM4		0x50	/* Titanium IV PowerBook (with L3 & M9) */
+#define PMAC_TYPE_EMAC			0x50	/* eMac */
+#define PMAC_TYPE_UNKNOWN_CORE99	0x5f
+
+/* MacRisc2 with UniNorth 2.0 */
+#define PMAC_TYPE_RACKMAC		0x80	/* XServe */
+#define PMAC_TYPE_WINDTUNNEL		0x81
+
+/* MacRISC2 machines based on the Pangea chipset
+ */
+#define PMAC_TYPE_PANGEA_IMAC		0x100	/* Flower Power iMac */
+#define PMAC_TYPE_IBOOK2		0x101	/* iBook2 (polycarbonate) */
+#define PMAC_TYPE_FLAT_PANEL_IMAC	0x102	/* Flat panel iMac */
+#define PMAC_TYPE_UNKNOWN_PANGEA	0x10f
+
+/* MacRISC2 machines based on the Intrepid chipset
+ */
+#define PMAC_TYPE_UNKNOWN_INTREPID	0x11f	/* Generic */
+
+/* MacRISC4 / G5 machines. We don't have per-machine selection here anymore,
+ * but rather machine families
+ */
+#define PMAC_TYPE_POWERMAC_G5		0x150	/* U3 & U3H based */
+#define PMAC_TYPE_POWERMAC_G5_U3L	0x151	/* U3L based desktop */
+#define PMAC_TYPE_IMAC_G5		0x152	/* iMac G5 */
+#define PMAC_TYPE_XSERVE_G5		0x153	/* Xserve G5 */
+#define PMAC_TYPE_UNKNOWN_K2		0x19f	/* Any other K2 based */
+#define PMAC_TYPE_UNKNOWN_SHASTA       	0x19e	/* Any other Shasta based */
+
+/*
+ * Motherboard flags
+ */
+
+#define PMAC_MB_CAN_SLEEP		0x00000001
+#define PMAC_MB_HAS_FW_POWER		0x00000002
+#define PMAC_MB_OLD_CORE99		0x00000004
+#define PMAC_MB_MOBILE			0x00000008
+#define PMAC_MB_MAY_SLEEP		0x00000010
+
+/*
+ * Feature calls supported on pmac
+ *
+ */
+
+/*
+ * Use this inline wrapper
+ */
+struct device_node;
+
+static inline long pmac_call_feature(int selector, struct device_node* node,
+					long param, long value)
+{
+	if (!ppc_md.feature_call || !machine_is(powermac))
+		return -ENODEV;
+	return ppc_md.feature_call(selector, node, param, value);
+}
+
+/* PMAC_FTR_SERIAL_ENABLE	(struct device_node* node, int param, int value)
+ * enable/disable an SCC side. Pass the node corresponding to the
+ * channel side as a parameter.
+ * param is the type of port
+ * if param is ored with PMAC_SCC_FLAG_XMON, then the SCC is locked enabled
+ * for use by xmon.
+ */
+#define PMAC_FTR_SCC_ENABLE		PMAC_FTR_DEF(0)
+	#define PMAC_SCC_ASYNC		0
+	#define PMAC_SCC_IRDA		1
+	#define PMAC_SCC_I2S1		2
+	#define PMAC_SCC_FLAG_XMON	0x00001000
+
+/* PMAC_FTR_MODEM_ENABLE	(struct device_node* node, 0, int value)
+ * enable/disable the internal modem.
+ */
+#define PMAC_FTR_MODEM_ENABLE		PMAC_FTR_DEF(1)
+
+/* PMAC_FTR_SWIM3_ENABLE	(struct device_node* node, 0,int value)
+ * enable/disable the swim3 (floppy) cell of a mac-io ASIC
+ */
+#define PMAC_FTR_SWIM3_ENABLE		PMAC_FTR_DEF(2)
+
+/* PMAC_FTR_MESH_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable the mesh (scsi) cell of a mac-io ASIC
+ */
+#define PMAC_FTR_MESH_ENABLE		PMAC_FTR_DEF(3)
+
+/* PMAC_FTR_IDE_ENABLE		(struct device_node* node, int busID, int value)
+ * enable/disable an IDE port of a mac-io ASIC
+ * pass the busID parameter
+ */
+#define PMAC_FTR_IDE_ENABLE		PMAC_FTR_DEF(4)
+
+/* PMAC_FTR_IDE_RESET		(struct device_node* node, int busID, int value)
+ * assert(1)/release(0) an IDE reset line (mac-io IDE only)
+ */
+#define PMAC_FTR_IDE_RESET		PMAC_FTR_DEF(5)
+
+/* PMAC_FTR_BMAC_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable the bmac (ethernet) cell of a mac-io ASIC, also drive
+ * it's reset line
+ */
+#define PMAC_FTR_BMAC_ENABLE		PMAC_FTR_DEF(6)
+
+/* PMAC_FTR_GMAC_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable the gmac (ethernet) cell of an uninorth ASIC. This
+ * control the cell's clock.
+ */
+#define PMAC_FTR_GMAC_ENABLE		PMAC_FTR_DEF(7)
+
+/* PMAC_FTR_GMAC_PHY_RESET	(struct device_node* node, 0, 0)
+ * Perform a HW reset of the PHY connected to a gmac controller.
+ * Pass the gmac device node, not the PHY node.
+ */
+#define PMAC_FTR_GMAC_PHY_RESET		PMAC_FTR_DEF(8)
+
+/* PMAC_FTR_SOUND_CHIP_ENABLE	(struct device_node* node, 0, int value)
+ * enable/disable the sound chip, whatever it is and provided it can
+ * acually be controlled
+ */
+#define PMAC_FTR_SOUND_CHIP_ENABLE	PMAC_FTR_DEF(9)
+
+/* -- add various tweaks related to sound routing -- */
+
+/* PMAC_FTR_AIRPORT_ENABLE	(struct device_node* node, 0, int value)
+ * enable/disable the airport card
+ */
+#define PMAC_FTR_AIRPORT_ENABLE		PMAC_FTR_DEF(10)
+
+/* PMAC_FTR_RESET_CPU		(NULL, int cpu_nr, 0)
+ * toggle the reset line of a CPU on an uninorth-based SMP machine
+ */
+#define PMAC_FTR_RESET_CPU		PMAC_FTR_DEF(11)
+
+/* PMAC_FTR_USB_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable an USB cell, along with the power of the USB "pad"
+ * on keylargo based machines
+ */
+#define PMAC_FTR_USB_ENABLE		PMAC_FTR_DEF(12)
+
+/* PMAC_FTR_1394_ENABLE		(struct device_node* node, 0, int value)
+ * enable/disable the firewire cell of an uninorth ASIC.
+ */
+#define PMAC_FTR_1394_ENABLE		PMAC_FTR_DEF(13)
+
+/* PMAC_FTR_1394_CABLE_POWER	(struct device_node* node, 0, int value)
+ * enable/disable the firewire cable power supply of the uninorth
+ * firewire cell
+ */
+#define PMAC_FTR_1394_CABLE_POWER	PMAC_FTR_DEF(14)
+
+/* PMAC_FTR_SLEEP_STATE		(struct device_node* node, 0, int value)
+ * set the sleep state of the motherboard.
+ *
+ * Pass -1 as value to query for sleep capability
+ * Pass 1 to set IOs to sleep
+ * Pass 0 to set IOs to wake
+ */
+#define PMAC_FTR_SLEEP_STATE		PMAC_FTR_DEF(15)
+
+/* PMAC_FTR_GET_MB_INFO		(NULL, selector, 0)
+ *
+ * returns some motherboard infos.
+ * selector: 0  - model id
+ *           1  - model flags (capabilities)
+ *           2  - model name (cast to const char *)
+ */
+#define PMAC_FTR_GET_MB_INFO		PMAC_FTR_DEF(16)
+#define   PMAC_MB_INFO_MODEL	0
+#define   PMAC_MB_INFO_FLAGS	1
+#define   PMAC_MB_INFO_NAME	2
+
+/* PMAC_FTR_READ_GPIO		(NULL, int index, 0)
+ *
+ * read a GPIO from a mac-io controller of type KeyLargo or Pangea.
+ * the value returned is a byte (positive), or a negative error code
+ */
+#define PMAC_FTR_READ_GPIO		PMAC_FTR_DEF(17)
+
+/* PMAC_FTR_WRITE_GPIO		(NULL, int index, int value)
+ *
+ * write a GPIO of a mac-io controller of type KeyLargo or Pangea.
+ */
+#define PMAC_FTR_WRITE_GPIO		PMAC_FTR_DEF(18)
+
+/* PMAC_FTR_ENABLE_MPIC
+ *
+ * Enable the MPIC cell
+ */
+#define PMAC_FTR_ENABLE_MPIC		PMAC_FTR_DEF(19)
+
+/* PMAC_FTR_AACK_DELAY_ENABLE	(NULL, int enable, 0)
+ *
+ * Enable/disable the AACK delay on the northbridge for systems using DFS
+ */
+#define PMAC_FTR_AACK_DELAY_ENABLE     	PMAC_FTR_DEF(20)
+
+/* PMAC_FTR_DEVICE_CAN_WAKE
+ *
+ * Used by video drivers to inform system that they can actually perform
+ * wakeup from sleep
+ */
+#define PMAC_FTR_DEVICE_CAN_WAKE	PMAC_FTR_DEF(22)
+
+
+/* Don't use those directly, they are for the sake of pmac_setup.c */
+extern long pmac_do_feature_call(unsigned int selector, ...);
+extern void pmac_feature_init(void);
+
+/* Video suspend tweak */
+extern void pmac_set_early_video_resume(void (*proc)(void *data), void *data);
+extern void pmac_call_early_video_resume(void);
+
+#define PMAC_FTR_DEF(x) ((0x6660000) | (x))
+
+/* The AGP driver registers itself here */
+extern void pmac_register_agp_pm(struct pci_dev *bridge,
+				 int (*suspend)(struct pci_dev *bridge),
+				 int (*resume)(struct pci_dev *bridge));
+
+/* Those are meant to be used by video drivers to deal with AGP
+ * suspend resume properly
+ */
+extern void pmac_suspend_agp_for_card(struct pci_dev *dev);
+extern void pmac_resume_agp_for_card(struct pci_dev *dev);
+
+/*
+ * The part below is for use by macio_asic.c only, do not rely
+ * on the data structures or constants below in a normal driver
+ *
+ */
+
+#define MAX_MACIO_CHIPS		2
+
+enum {
+	macio_unknown = 0,
+	macio_grand_central,
+	macio_ohare,
+	macio_ohareII,
+	macio_heathrow,
+	macio_gatwick,
+	macio_paddington,
+	macio_keylargo,
+	macio_pangea,
+	macio_intrepid,
+	macio_keylargo2,
+	macio_shasta,
+};
+
+struct macio_chip
+{
+	struct device_node	*of_node;
+	int			type;
+	const char		*name;
+	int			rev;
+	volatile u32		__iomem *base;
+	unsigned long		flags;
+
+	/* For use by macio_asic PCI driver */
+	struct macio_bus	lbus;
+};
+
+extern struct macio_chip macio_chips[MAX_MACIO_CHIPS];
+
+#define MACIO_FLAG_SCCA_ON	0x00000001
+#define MACIO_FLAG_SCCB_ON	0x00000002
+#define MACIO_FLAG_SCC_LOCKED	0x00000004
+#define MACIO_FLAG_AIRPORT_ON	0x00000010
+#define MACIO_FLAG_FW_SUPPORTED	0x00000020
+
+extern struct macio_chip* macio_find(struct device_node* child, int type);
+
+#define MACIO_FCR32(macio, r)	((macio)->base + ((r) >> 2))
+#define MACIO_FCR8(macio, r)	(((volatile u8 __iomem *)((macio)->base)) + (r))
+
+#define MACIO_IN32(r)		(in_le32(MACIO_FCR32(macio,r)))
+#define MACIO_OUT32(r,v)	(out_le32(MACIO_FCR32(macio,r), (v)))
+#define MACIO_BIS(r,v)		(MACIO_OUT32((r), MACIO_IN32(r) | (v)))
+#define MACIO_BIC(r,v)		(MACIO_OUT32((r), MACIO_IN32(r) & ~(v)))
+#define MACIO_IN8(r)		(in_8(MACIO_FCR8(macio,r)))
+#define MACIO_OUT8(r,v)		(out_8(MACIO_FCR8(macio,r), (v)))
+
+/*
+ * Those are exported by pmac feature for internal use by arch code
+ * only like the platform function callbacks, do not use directly in drivers
+ */
+extern spinlock_t feature_lock;
+extern struct device_node *uninorth_node;
+extern u32 __iomem *uninorth_base;
+
+/*
+ * Uninorth reg. access. Note that Uni-N regs are big endian
+ */
+
+#define UN_REG(r)	(uninorth_base + ((r) >> 2))
+#define UN_IN(r)	(in_be32(UN_REG(r)))
+#define UN_OUT(r,v)	(out_be32(UN_REG(r), (v)))
+#define UN_BIS(r,v)	(UN_OUT((r), UN_IN(r) | (v)))
+#define UN_BIC(r,v)	(UN_OUT((r), UN_IN(r) & ~(v)))
+
+/* Uninorth variant:
+ *
+ * 0 = not uninorth
+ * 1 = U1.x or U2.x
+ * 3 = U3
+ * 4 = U4
+ */
+extern int pmac_get_uninorth_variant(void);
+
+#endif /* __ASM_POWERPC_PMAC_FEATURE_H */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/pmac_low_i2c.h b/arch/powerpc/include/asm/pmac_low_i2c.h
new file mode 100644
index 000000000000..131011bd7e76
--- /dev/null
+++ b/arch/powerpc/include/asm/pmac_low_i2c.h
@@ -0,0 +1,107 @@
+/* 
+ *  include/asm-ppc/pmac_low_i2c.h
+ *
+ *  Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+#ifndef __PMAC_LOW_I2C_H__
+#define __PMAC_LOW_I2C_H__
+#ifdef __KERNEL__
+
+/* i2c mode (based on the platform functions format) */
+enum {
+	pmac_i2c_mode_dumb	= 1,
+	pmac_i2c_mode_std	= 2,
+	pmac_i2c_mode_stdsub	= 3,
+	pmac_i2c_mode_combined	= 4,
+};
+
+/* RW bit in address */
+enum {
+	pmac_i2c_read		= 0x01,
+	pmac_i2c_write		= 0x00
+};
+
+/* i2c bus type */
+enum {
+	pmac_i2c_bus_keywest	= 0,
+	pmac_i2c_bus_pmu	= 1,
+	pmac_i2c_bus_smu	= 2,
+};
+
+/* i2c bus features */
+enum {
+	/* can_largesub : supports >1 byte subaddresses (SMU only) */
+	pmac_i2c_can_largesub	= 0x00000001u,
+
+	/* multibus : device node holds multiple busses, bus number is
+	 * encoded in bits 0xff00 of "reg" of a given device
+	 */
+	pmac_i2c_multibus	= 0x00000002u,
+};
+
+/* i2c busses in the system */
+struct pmac_i2c_bus;
+struct i2c_adapter;
+
+/* Init, called early during boot */
+extern int pmac_i2c_init(void);
+
+/* Lookup an i2c bus for a device-node. The node can be either the bus
+ * node itself or a device below it. In the case of a multibus, the bus
+ * node itself is the controller node, else, it's a child of the controller
+ * node
+ */
+extern struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node);
+
+/* Get the address for an i2c device. This strips the bus number if
+ * necessary. The 7 bits address is returned 1 bit right shifted so that the
+ * direction can be directly ored in
+ */
+extern u8 pmac_i2c_get_dev_addr(struct device_node *device);
+
+/* Get infos about a bus */
+extern struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus);
+extern struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus);
+extern int pmac_i2c_get_type(struct pmac_i2c_bus *bus);
+extern int pmac_i2c_get_flags(struct pmac_i2c_bus *bus);
+extern int pmac_i2c_get_channel(struct pmac_i2c_bus *bus);
+
+/* i2c layer adapter attach/detach */
+extern void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus,
+				    struct i2c_adapter *adapter);
+extern void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus,
+				    struct i2c_adapter *adapter);
+extern struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus);
+extern struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter);
+
+/* March a device or bus with an i2c adapter structure, to be used by drivers
+ * to match device-tree nodes with i2c adapters during adapter discovery
+ * callbacks
+ */
+extern int pmac_i2c_match_adapter(struct device_node *dev,
+				  struct i2c_adapter *adapter);
+
+
+/* (legacy) Locking functions exposed to i2c-keywest */
+extern int pmac_low_i2c_lock(struct device_node *np);
+extern int pmac_low_i2c_unlock(struct device_node *np);
+
+/* Access functions for platform code */
+extern int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled);
+extern void pmac_i2c_close(struct pmac_i2c_bus *bus);
+extern int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode);
+extern int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
+			 u32 subaddr, u8 *data,  int len);
+
+/* Suspend/resume code called by via-pmu directly for now */
+extern void pmac_pfunc_i2c_suspend(void);
+extern void pmac_pfunc_i2c_resume(void);
+
+#endif /* __KERNEL__ */
+#endif /* __PMAC_LOW_I2C_H__ */
diff --git a/arch/powerpc/include/asm/pmac_pfunc.h b/arch/powerpc/include/asm/pmac_pfunc.h
new file mode 100644
index 000000000000..1330d6a58c57
--- /dev/null
+++ b/arch/powerpc/include/asm/pmac_pfunc.h
@@ -0,0 +1,252 @@
+#ifndef __PMAC_PFUNC_H__
+#define __PMAC_PFUNC_H__
+
+#include <linux/types.h>
+#include <linux/list.h>
+
+/* Flags in command lists */
+#define PMF_FLAGS_ON_INIT		0x80000000u
+#define PMF_FLGAS_ON_TERM		0x40000000u
+#define PMF_FLAGS_ON_SLEEP		0x20000000u
+#define PMF_FLAGS_ON_WAKE		0x10000000u
+#define PMF_FLAGS_ON_DEMAND		0x08000000u
+#define PMF_FLAGS_INT_GEN		0x04000000u
+#define PMF_FLAGS_HIGH_SPEED		0x02000000u
+#define PMF_FLAGS_LOW_SPEED		0x01000000u
+#define PMF_FLAGS_SIDE_EFFECTS		0x00800000u
+
+/*
+ * Arguments to a platform function call.
+ *
+ * NOTE: By convention, pointer arguments point to an u32
+ */
+struct pmf_args {
+	union {
+		u32 v;
+		u32 *p;
+	} u[4];
+	unsigned int count;
+};
+
+/*
+ * A driver capable of interpreting commands provides a handlers
+ * structure filled with whatever handlers are implemented by this
+ * driver. Non implemented handlers are left NULL.
+ *
+ * PMF_STD_ARGS are the same arguments that are passed to the parser
+ * and that gets passed back to the various handlers.
+ *
+ * Interpreting a given function always start with a begin() call which
+ * returns an instance data to be passed around subsequent calls, and
+ * ends with an end() call. This allows the low level driver to implement
+ * locking policy or per-function instance data.
+ *
+ * For interrupt capable functions, irq_enable() is called when a client
+ * registers, and irq_disable() is called when the last client unregisters
+ * Note that irq_enable & irq_disable are called within a semaphore held
+ * by the core, thus you should not try to register yourself to some other
+ * pmf interrupt during those calls.
+ */
+
+#define PMF_STD_ARGS	struct pmf_function *func, void *instdata, \
+		        struct pmf_args *args
+
+struct pmf_function;
+
+struct pmf_handlers {
+	void * (*begin)(struct pmf_function *func, struct pmf_args *args);
+	void (*end)(struct pmf_function *func, void *instdata);
+
+	int (*irq_enable)(struct pmf_function *func);
+	int (*irq_disable)(struct pmf_function *func);
+
+	int (*write_gpio)(PMF_STD_ARGS, u8 value, u8 mask);
+	int (*read_gpio)(PMF_STD_ARGS, u8 mask, int rshift, u8 xor);
+
+	int (*write_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask);
+	int (*read_reg32)(PMF_STD_ARGS, u32 offset);
+	int (*write_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask);
+	int (*read_reg16)(PMF_STD_ARGS, u32 offset);
+	int (*write_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask);
+	int (*read_reg8)(PMF_STD_ARGS, u32 offset);
+
+	int (*delay)(PMF_STD_ARGS, u32 duration);
+
+	int (*wait_reg32)(PMF_STD_ARGS, u32 offset, u32 value, u32 mask);
+	int (*wait_reg16)(PMF_STD_ARGS, u32 offset, u16 value, u16 mask);
+	int (*wait_reg8)(PMF_STD_ARGS, u32 offset, u8 value, u8 mask);
+
+	int (*read_i2c)(PMF_STD_ARGS, u32 len);
+	int (*write_i2c)(PMF_STD_ARGS, u32 len, const u8 *data);
+	int (*rmw_i2c)(PMF_STD_ARGS, u32 masklen, u32 valuelen, u32 totallen,
+		       const u8 *maskdata, const u8 *valuedata);
+
+	int (*read_cfg)(PMF_STD_ARGS, u32 offset, u32 len);
+	int (*write_cfg)(PMF_STD_ARGS, u32 offset, u32 len, const u8 *data);
+	int (*rmw_cfg)(PMF_STD_ARGS, u32 offset, u32 masklen, u32 valuelen,
+		       u32 totallen, const u8 *maskdata, const u8 *valuedata);
+
+	int (*read_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len);
+	int (*write_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 len, const u8 *data);
+	int (*set_i2c_mode)(PMF_STD_ARGS, int mode);
+	int (*rmw_i2c_sub)(PMF_STD_ARGS, u8 subaddr, u32 masklen, u32 valuelen,
+			   u32 totallen, const u8 *maskdata,
+			   const u8 *valuedata);
+
+	int (*read_reg32_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
+			       u32 xor);
+	int (*read_reg16_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
+			       u32 xor);
+	int (*read_reg8_msrx)(PMF_STD_ARGS, u32 offset, u32 mask, u32 shift,
+			      u32 xor);
+
+	int (*write_reg32_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
+	int (*write_reg16_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
+	int (*write_reg8_slm)(PMF_STD_ARGS, u32 offset, u32 shift, u32 mask);
+
+	int (*mask_and_compare)(PMF_STD_ARGS, u32 len, const u8 *maskdata,
+				const u8 *valuedata);
+
+	struct module *owner;
+};
+
+
+/*
+ * Drivers who expose platform functions register at init time, this
+ * causes the platform functions for that device node to be parsed in
+ * advance and associated with the device. The data structures are
+ * partially public so a driver can walk the list of platform functions
+ * and eventually inspect the flags
+ */
+struct pmf_device;
+
+struct pmf_function {
+	/* All functions for a given driver are linked */
+	struct list_head	link;
+
+	/* Function node & driver data */
+	struct device_node	*node;
+	void			*driver_data;
+
+	/* For internal use by core */
+	struct pmf_device	*dev;
+
+	/* The name is the "xxx" in "platform-do-xxx", this is how
+	 * platform functions are identified by this code. Some functions
+	 * only operate for a given target, in which case the phandle is
+	 * here (or 0 if the filter doesn't apply)
+	 */
+	const char		*name;
+	u32			phandle;
+
+	/* The flags for that function. You can have several functions
+	 * with the same name and different flag
+	 */
+	u32			flags;
+
+	/* The actual tokenized function blob */
+	const void		*data;
+	unsigned int		length;
+
+	/* Interrupt clients */
+	struct list_head	irq_clients;
+
+	/* Refcounting */
+	struct kref		ref;
+};
+
+/*
+ * For platform functions that are interrupts, one can register
+ * irq_client structures. You canNOT use the same structure twice
+ * as it contains a link member. Also, the callback is called with
+ * a spinlock held, you must not call back into any of the pmf_* functions
+ * from within that callback
+ */
+struct pmf_irq_client {
+	void			(*handler)(void *data);
+	void			*data;
+	struct module		*owner;
+	struct list_head	link;
+	struct pmf_function	*func;
+};
+
+
+/*
+ * Register/Unregister a function-capable driver and its handlers
+ */
+extern int pmf_register_driver(struct device_node *np,
+			      struct pmf_handlers *handlers,
+			      void *driverdata);
+
+extern void pmf_unregister_driver(struct device_node *np);
+
+
+/*
+ * Register/Unregister interrupt clients
+ */
+extern int pmf_register_irq_client(struct device_node *np,
+				   const char *name,
+				   struct pmf_irq_client *client);
+
+extern void pmf_unregister_irq_client(struct pmf_irq_client *client);
+
+/*
+ * Called by the handlers when an irq happens
+ */
+extern void pmf_do_irq(struct pmf_function *func);
+
+
+/*
+ * Low level call to platform functions.
+ *
+ * The phandle can filter on the target object for functions that have
+ * multiple targets, the flags allow you to restrict the call to a given
+ * combination of flags.
+ *
+ * The args array contains as many arguments as is required by the function,
+ * this is dependent on the function you are calling, unfortunately Apple
+ * mechanism provides no way to encode that so you have to get it right at
+ * the call site. Some functions require no args, in which case, you can
+ * pass NULL.
+ *
+ * You can also pass NULL to the name. This will match any function that has
+ * the appropriate combination of flags & phandle or you can pass 0 to the
+ * phandle to match any
+ */
+extern int pmf_do_functions(struct device_node *np, const char *name,
+			    u32 phandle, u32 flags, struct pmf_args *args);
+
+
+
+/*
+ * High level call to a platform function.
+ *
+ * This one looks for the platform-xxx first so you should call it to the
+ * actual target if any. It will fallback to platform-do-xxx if it can't
+ * find one. It will also exclusively target functions that have
+ * the "OnDemand" flag.
+ */
+
+extern int pmf_call_function(struct device_node *target, const char *name,
+			     struct pmf_args *args);
+
+
+/*
+ * For low latency interrupt usage, you can lookup for on-demand functions
+ * using the functions below
+ */
+
+extern struct pmf_function *pmf_find_function(struct device_node *target,
+					      const char *name);
+
+extern struct pmf_function * pmf_get_function(struct pmf_function *func);
+extern void pmf_put_function(struct pmf_function *func);
+
+extern int pmf_call_one(struct pmf_function *func, struct pmf_args *args);
+
+
+/* Suspend/resume code called by via-pmu directly for now */
+extern void pmac_pfunc_base_suspend(void);
+extern void pmac_pfunc_base_resume(void);
+
+#endif /* __PMAC_PFUNC_H__ */
diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h
new file mode 100644
index 000000000000..d6a616a1b3ea
--- /dev/null
+++ b/arch/powerpc/include/asm/pmc.h
@@ -0,0 +1,37 @@
+/*
+ * pmc.h
+ * Copyright (C) 2004  David Gibson, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+#ifndef _POWERPC_PMC_H
+#define _POWERPC_PMC_H
+#ifdef __KERNEL__
+
+#include <asm/ptrace.h>
+
+typedef void (*perf_irq_t)(struct pt_regs *);
+extern perf_irq_t perf_irq;
+
+int reserve_pmc_hardware(perf_irq_t new_perf_irq);
+void release_pmc_hardware(void);
+
+#ifdef CONFIG_PPC64
+void power4_enable_pmcs(void);
+void pasemi_enable_pmcs(void);
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_PMC_H */
diff --git a/arch/powerpc/include/asm/pmi.h b/arch/powerpc/include/asm/pmi.h
new file mode 100644
index 000000000000..b4e91fbf5081
--- /dev/null
+++ b/arch/powerpc/include/asm/pmi.h
@@ -0,0 +1,66 @@
+#ifndef _POWERPC_PMI_H
+#define _POWERPC_PMI_H
+
+/*
+ * Definitions for talking with PMI device on PowerPC
+ *
+ * PMI (Platform Management Interrupt) is a way to communicate
+ * with the BMC (Baseboard Management Controller) via interrupts.
+ * Unlike IPMI it is bidirectional and has a low latency.
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __KERNEL__
+
+#define PMI_TYPE_FREQ_CHANGE	0x01
+#define PMI_TYPE_POWER_BUTTON	0x02
+#define PMI_READ_TYPE		0
+#define PMI_READ_DATA0		1
+#define PMI_READ_DATA1		2
+#define PMI_READ_DATA2		3
+#define PMI_WRITE_TYPE		4
+#define PMI_WRITE_DATA0		5
+#define PMI_WRITE_DATA1		6
+#define PMI_WRITE_DATA2		7
+
+#define PMI_ACK			0x80
+
+#define PMI_TIMEOUT		100
+
+typedef struct {
+	u8	type;
+	u8	data0;
+	u8	data1;
+	u8	data2;
+} pmi_message_t;
+
+struct pmi_handler {
+	struct list_head node;
+	u8 type;
+	void (*handle_pmi_message) (pmi_message_t);
+};
+
+int pmi_register_handler(struct pmi_handler *);
+void pmi_unregister_handler(struct pmi_handler *);
+
+int pmi_send_message(pmi_message_t);
+
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_PMI_H */
diff --git a/arch/powerpc/include/asm/poll.h b/arch/powerpc/include/asm/poll.h
new file mode 100644
index 000000000000..c98509d3149e
--- /dev/null
+++ b/arch/powerpc/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/powerpc/include/asm/posix_types.h b/arch/powerpc/include/asm/posix_types.h
new file mode 100644
index 000000000000..c4e396b540df
--- /dev/null
+++ b/arch/powerpc/include/asm/posix_types.h
@@ -0,0 +1,128 @@
+#ifndef _ASM_POWERPC_POSIX_TYPES_H
+#define _ASM_POWERPC_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned int	__kernel_mode_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef long		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef long		__kernel_suseconds_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+typedef unsigned int	__kernel_old_uid_t;
+typedef unsigned int	__kernel_old_gid_t;
+
+#ifdef __powerpc64__
+typedef unsigned long  	__kernel_nlink_t;
+typedef int             __kernel_ipc_pid_t;
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef unsigned long	__kernel_old_dev_t;
+#else
+typedef unsigned short	__kernel_nlink_t;
+typedef short		__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef unsigned int	__kernel_old_dev_t;
+#endif
+
+#ifdef __powerpc64__
+typedef long long	__kernel_loff_t;
+#else
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#ifndef __GNUC__
+
+#define	__FD_SET(d, set)	((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+#define	__FD_CLR(d, set)	((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+#define	__FD_ISSET(d, set)	(((set)->fds_bits[__FDELT(d)] & __FDMASK(d)) != 0)
+#define	__FD_ZERO(set)	\
+  ((void) memset ((void *) (set), 0, sizeof (__kernel_fd_set)))
+
+#else /* __GNUC__ */
+
+#if defined(__KERNEL__)
+/* With GNU C, use inline functions instead so args are evaluated only once: */
+
+#undef __FD_SET
+static __inline__ void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static __inline__ void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long fd, __kernel_fd_set *p)
+{ 
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef __FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = (unsigned long *)p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		      case 16:
+			tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+
+		      case 8:
+			tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+
+		      case 4:
+			tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) */
+#endif /* __GNUC__ */
+#endif /* _ASM_POWERPC_POSIX_TYPES_H */
diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h
new file mode 100644
index 000000000000..854ab713f56c
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc-pci.h
@@ -0,0 +1,149 @@
+/*
+ * c 2001 PPC 64 Team, IBM Corp
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_PPC_PCI_H
+#define _ASM_POWERPC_PPC_PCI_H
+#ifdef __KERNEL__
+
+#ifdef CONFIG_PCI
+
+#include <linux/pci.h>
+#include <asm/pci-bridge.h>
+
+extern unsigned long isa_io_base;
+
+extern void pci_setup_phb_io(struct pci_controller *hose, int primary);
+extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary);
+
+
+extern struct list_head hose_list;
+
+extern void find_and_init_phbs(void);
+
+extern struct pci_dev *isa_bridge_pcidev;	/* may be NULL if no ISA bus */
+
+/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */
+#define BUID_HI(buid) ((buid) >> 32)
+#define BUID_LO(buid) ((buid) & 0xffffffff)
+
+/* PCI device_node operations */
+struct device_node;
+typedef void *(*traverse_func)(struct device_node *me, void *data);
+void *traverse_pci_devices(struct device_node *start, traverse_func pre,
+		void *data);
+
+extern void pci_devs_phb_init(void);
+extern void pci_devs_phb_init_dynamic(struct pci_controller *phb);
+extern void scan_phb(struct pci_controller *hose);
+
+/* From rtas_pci.h */
+extern void init_pci_config_tokens (void);
+extern unsigned long get_phb_buid (struct device_node *);
+extern int rtas_setup_phb(struct pci_controller *phb);
+
+extern unsigned long pci_probe_only;
+
+/* ---- EEH internal-use-only related routines ---- */
+#ifdef CONFIG_EEH
+
+void pci_addr_cache_insert_device(struct pci_dev *dev);
+void pci_addr_cache_remove_device(struct pci_dev *dev);
+void pci_addr_cache_build(void);
+struct pci_dev *pci_get_device_by_addr(unsigned long addr);
+
+/**
+ * eeh_slot_error_detail -- record and EEH error condition to the log
+ * @pdn:      pci device node
+ * @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE
+ *
+ * Obtains the EEH error details from the RTAS subsystem,
+ * and then logs these details with the RTAS error log system.
+ */
+#define EEH_LOG_TEMP_FAILURE 1
+#define EEH_LOG_PERM_FAILURE 2
+void eeh_slot_error_detail (struct pci_dn *pdn, int severity);
+
+/**
+ * rtas_pci_enable - enable IO transfers for this slot
+ * @pdn:       pci device node
+ * @function:  either EEH_THAW_MMIO or EEH_THAW_DMA 
+ *
+ * Enable I/O transfers to this slot 
+ */
+#define EEH_THAW_MMIO 2
+#define EEH_THAW_DMA  3
+int rtas_pci_enable(struct pci_dn *pdn, int function);
+
+/**
+ * rtas_set_slot_reset -- unfreeze a frozen slot
+ * @pdn:       pci device node
+ *
+ * Clear the EEH-frozen condition on a slot.  This routine
+ * does this by asserting the PCI #RST line for 1/8th of
+ * a second; this routine will sleep while the adapter is
+ * being reset.
+ *
+ * Returns a non-zero value if the reset failed.
+ */
+int rtas_set_slot_reset (struct pci_dn *);
+int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs);
+
+/** 
+ * eeh_restore_bars - Restore device configuration info.
+ * @pdn:       pci device node
+ *
+ * A reset of a PCI device will clear out its config space.
+ * This routines will restore the config space for this
+ * device, and is children, to values previously obtained
+ * from the firmware.
+ */
+void eeh_restore_bars(struct pci_dn *);
+
+/**
+ * rtas_configure_bridge -- firmware initialization of pci bridge
+ * @pdn:       pci device node
+ *
+ * Ask the firmware to configure all PCI bridges devices
+ * located behind the indicated node. Required after a
+ * pci device reset. Does essentially the same hing as
+ * eeh_restore_bars, but for brdges, and lets firmware 
+ * do the work.
+ */
+void rtas_configure_bridge(struct pci_dn *);
+
+int rtas_write_config(struct pci_dn *, int where, int size, u32 val);
+int rtas_read_config(struct pci_dn *, int where, int size, u32 *val);
+
+/**
+ * eeh_mark_slot -- set mode flags for pertition endpoint
+ * @pdn:       pci device node
+ *
+ * mark and clear slots: find "partition endpoint" PE and set or 
+ * clear the flags for each subnode of the PE.
+ */
+void eeh_mark_slot (struct device_node *dn, int mode_flag);
+void eeh_clear_slot (struct device_node *dn, int mode_flag);
+
+/**
+ * find_device_pe -- Find the associated "Partiationable Endpoint" PE
+ * @pdn:       pci device node
+ */
+struct device_node * find_device_pe(struct device_node *dn);
+
+void eeh_sysfs_add_device(struct pci_dev *pdev);
+void eeh_sysfs_remove_device(struct pci_dev *pdev);
+
+#endif /* CONFIG_EEH */
+
+#else /* CONFIG_PCI */
+static inline void find_and_init_phbs(void) { }
+static inline void init_pci_config_tokens(void) { }
+#endif /* !CONFIG_PCI */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_PPC_PCI_H */
diff --git a/arch/powerpc/include/asm/ppc4xx.h b/arch/powerpc/include/asm/ppc4xx.h
new file mode 100644
index 000000000000..033039a80c42
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc4xx.h
@@ -0,0 +1,18 @@
+/*
+ * PPC4xx Prototypes and definitions
+ *
+ * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_POWERPC_PPC4xx_H__
+#define __ASM_POWERPC_PPC4xx_H__
+
+extern void ppc4xx_reset_system(char *cmd);
+
+#endif /* __ASM_POWERPC_PPC4xx_H__ */
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
new file mode 100644
index 000000000000..0966899d974b
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -0,0 +1,689 @@
+/*
+ * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan.
+ */
+#ifndef _ASM_POWERPC_PPC_ASM_H
+#define _ASM_POWERPC_PPC_ASM_H
+
+#include <linux/stringify.h>
+#include <asm/asm-compat.h>
+#include <asm/processor.h>
+
+#ifndef __ASSEMBLY__
+#error __FILE__ should only be used in assembler files
+#else
+
+#define SZL			(BITS_PER_LONG/8)
+
+/*
+ * Stuff for accurate CPU time accounting.
+ * These macros handle transitions between user and system state
+ * in exception entry and exit and accumulate time to the
+ * user_time and system_time fields in the paca.
+ */
+
+#ifndef CONFIG_VIRT_CPU_ACCOUNTING
+#define ACCOUNT_CPU_USER_ENTRY(ra, rb)
+#define ACCOUNT_CPU_USER_EXIT(ra, rb)
+#else
+#define ACCOUNT_CPU_USER_ENTRY(ra, rb)					\
+	beq	2f;			/* if from kernel mode */	\
+BEGIN_FTR_SECTION;							\
+	mfspr	ra,SPRN_PURR;		/* get processor util. reg */	\
+END_FTR_SECTION_IFSET(CPU_FTR_PURR);					\
+BEGIN_FTR_SECTION;							\
+	MFTB(ra);			/* or get TB if no PURR */	\
+END_FTR_SECTION_IFCLR(CPU_FTR_PURR);					\
+	ld	rb,PACA_STARTPURR(r13);					\
+	std	ra,PACA_STARTPURR(r13);					\
+	subf	rb,rb,ra;		/* subtract start value */	\
+	ld	ra,PACA_USER_TIME(r13);					\
+	add	ra,ra,rb;		/* add on to user time */	\
+	std	ra,PACA_USER_TIME(r13);					\
+2:
+
+#define ACCOUNT_CPU_USER_EXIT(ra, rb)					\
+BEGIN_FTR_SECTION;							\
+	mfspr	ra,SPRN_PURR;		/* get processor util. reg */	\
+END_FTR_SECTION_IFSET(CPU_FTR_PURR);					\
+BEGIN_FTR_SECTION;							\
+	MFTB(ra);			/* or get TB if no PURR */	\
+END_FTR_SECTION_IFCLR(CPU_FTR_PURR);					\
+	ld	rb,PACA_STARTPURR(r13);					\
+	std	ra,PACA_STARTPURR(r13);					\
+	subf	rb,rb,ra;		/* subtract start value */	\
+	ld	ra,PACA_SYSTEM_TIME(r13);				\
+	add	ra,ra,rb;		/* add on to user time */	\
+	std	ra,PACA_SYSTEM_TIME(r13);
+#endif
+
+/*
+ * Macros for storing registers into and loading registers from
+ * exception frames.
+ */
+#ifdef __powerpc64__
+#define SAVE_GPR(n, base)	std	n,GPR0+8*(n)(base)
+#define REST_GPR(n, base)	ld	n,GPR0+8*(n)(base)
+#define SAVE_NVGPRS(base)	SAVE_8GPRS(14, base); SAVE_10GPRS(22, base)
+#define REST_NVGPRS(base)	REST_8GPRS(14, base); REST_10GPRS(22, base)
+#else
+#define SAVE_GPR(n, base)	stw	n,GPR0+4*(n)(base)
+#define REST_GPR(n, base)	lwz	n,GPR0+4*(n)(base)
+#define SAVE_NVGPRS(base)	SAVE_GPR(13, base); SAVE_8GPRS(14, base); \
+				SAVE_10GPRS(22, base)
+#define REST_NVGPRS(base)	REST_GPR(13, base); REST_8GPRS(14, base); \
+				REST_10GPRS(22, base)
+#endif
+
+/*
+ * Define what the VSX XX1 form instructions will look like, then add
+ * the 128 bit load store instructions based on that.
+ */
+#define VSX_XX1(xs, ra, rb)	(((xs) & 0x1f) << 21 | ((ra) << 16) |  \
+				 ((rb) << 11) | (((xs) >> 5)))
+
+#define STXVD2X(xs, ra, rb)	.long (0x7c000798 | VSX_XX1((xs), (ra), (rb)))
+#define LXVD2X(xs, ra, rb)	.long (0x7c000698 | VSX_XX1((xs), (ra), (rb)))
+
+#define SAVE_2GPRS(n, base)	SAVE_GPR(n, base); SAVE_GPR(n+1, base)
+#define SAVE_4GPRS(n, base)	SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
+#define SAVE_8GPRS(n, base)	SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
+#define SAVE_10GPRS(n, base)	SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
+#define REST_2GPRS(n, base)	REST_GPR(n, base); REST_GPR(n+1, base)
+#define REST_4GPRS(n, base)	REST_2GPRS(n, base); REST_2GPRS(n+2, base)
+#define REST_8GPRS(n, base)	REST_4GPRS(n, base); REST_4GPRS(n+4, base)
+#define REST_10GPRS(n, base)	REST_8GPRS(n, base); REST_2GPRS(n+8, base)
+
+#define SAVE_FPR(n, base)	stfd	n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base)
+#define SAVE_2FPRS(n, base)	SAVE_FPR(n, base); SAVE_FPR(n+1, base)
+#define SAVE_4FPRS(n, base)	SAVE_2FPRS(n, base); SAVE_2FPRS(n+2, base)
+#define SAVE_8FPRS(n, base)	SAVE_4FPRS(n, base); SAVE_4FPRS(n+4, base)
+#define SAVE_16FPRS(n, base)	SAVE_8FPRS(n, base); SAVE_8FPRS(n+8, base)
+#define SAVE_32FPRS(n, base)	SAVE_16FPRS(n, base); SAVE_16FPRS(n+16, base)
+#define REST_FPR(n, base)	lfd	n,THREAD_FPR0+8*TS_FPRWIDTH*(n)(base)
+#define REST_2FPRS(n, base)	REST_FPR(n, base); REST_FPR(n+1, base)
+#define REST_4FPRS(n, base)	REST_2FPRS(n, base); REST_2FPRS(n+2, base)
+#define REST_8FPRS(n, base)	REST_4FPRS(n, base); REST_4FPRS(n+4, base)
+#define REST_16FPRS(n, base)	REST_8FPRS(n, base); REST_8FPRS(n+8, base)
+#define REST_32FPRS(n, base)	REST_16FPRS(n, base); REST_16FPRS(n+16, base)
+
+#define SAVE_VR(n,b,base)	li b,THREAD_VR0+(16*(n));  stvx n,b,base
+#define SAVE_2VRS(n,b,base)	SAVE_VR(n,b,base); SAVE_VR(n+1,b,base)
+#define SAVE_4VRS(n,b,base)	SAVE_2VRS(n,b,base); SAVE_2VRS(n+2,b,base)
+#define SAVE_8VRS(n,b,base)	SAVE_4VRS(n,b,base); SAVE_4VRS(n+4,b,base)
+#define SAVE_16VRS(n,b,base)	SAVE_8VRS(n,b,base); SAVE_8VRS(n+8,b,base)
+#define SAVE_32VRS(n,b,base)	SAVE_16VRS(n,b,base); SAVE_16VRS(n+16,b,base)
+#define REST_VR(n,b,base)	li b,THREAD_VR0+(16*(n)); lvx n,b,base
+#define REST_2VRS(n,b,base)	REST_VR(n,b,base); REST_VR(n+1,b,base)
+#define REST_4VRS(n,b,base)	REST_2VRS(n,b,base); REST_2VRS(n+2,b,base)
+#define REST_8VRS(n,b,base)	REST_4VRS(n,b,base); REST_4VRS(n+4,b,base)
+#define REST_16VRS(n,b,base)	REST_8VRS(n,b,base); REST_8VRS(n+8,b,base)
+#define REST_32VRS(n,b,base)	REST_16VRS(n,b,base); REST_16VRS(n+16,b,base)
+
+/* Save the lower 32 VSRs in the thread VSR region */
+#define SAVE_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n));  STXVD2X(n,b,base)
+#define SAVE_2VSRS(n,b,base)	SAVE_VSR(n,b,base); SAVE_VSR(n+1,b,base)
+#define SAVE_4VSRS(n,b,base)	SAVE_2VSRS(n,b,base); SAVE_2VSRS(n+2,b,base)
+#define SAVE_8VSRS(n,b,base)	SAVE_4VSRS(n,b,base); SAVE_4VSRS(n+4,b,base)
+#define SAVE_16VSRS(n,b,base)	SAVE_8VSRS(n,b,base); SAVE_8VSRS(n+8,b,base)
+#define SAVE_32VSRS(n,b,base)	SAVE_16VSRS(n,b,base); SAVE_16VSRS(n+16,b,base)
+#define REST_VSR(n,b,base)	li b,THREAD_VSR0+(16*(n)); LXVD2X(n,b,base)
+#define REST_2VSRS(n,b,base)	REST_VSR(n,b,base); REST_VSR(n+1,b,base)
+#define REST_4VSRS(n,b,base)	REST_2VSRS(n,b,base); REST_2VSRS(n+2,b,base)
+#define REST_8VSRS(n,b,base)	REST_4VSRS(n,b,base); REST_4VSRS(n+4,b,base)
+#define REST_16VSRS(n,b,base)	REST_8VSRS(n,b,base); REST_8VSRS(n+8,b,base)
+#define REST_32VSRS(n,b,base)	REST_16VSRS(n,b,base); REST_16VSRS(n+16,b,base)
+/* Save the upper 32 VSRs (32-63) in the thread VSX region (0-31) */
+#define SAVE_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n));  STXVD2X(n+32,b,base)
+#define SAVE_2VSRSU(n,b,base)	SAVE_VSRU(n,b,base); SAVE_VSRU(n+1,b,base)
+#define SAVE_4VSRSU(n,b,base)	SAVE_2VSRSU(n,b,base); SAVE_2VSRSU(n+2,b,base)
+#define SAVE_8VSRSU(n,b,base)	SAVE_4VSRSU(n,b,base); SAVE_4VSRSU(n+4,b,base)
+#define SAVE_16VSRSU(n,b,base)	SAVE_8VSRSU(n,b,base); SAVE_8VSRSU(n+8,b,base)
+#define SAVE_32VSRSU(n,b,base)	SAVE_16VSRSU(n,b,base); SAVE_16VSRSU(n+16,b,base)
+#define REST_VSRU(n,b,base)	li b,THREAD_VR0+(16*(n)); LXVD2X(n+32,b,base)
+#define REST_2VSRSU(n,b,base)	REST_VSRU(n,b,base); REST_VSRU(n+1,b,base)
+#define REST_4VSRSU(n,b,base)	REST_2VSRSU(n,b,base); REST_2VSRSU(n+2,b,base)
+#define REST_8VSRSU(n,b,base)	REST_4VSRSU(n,b,base); REST_4VSRSU(n+4,b,base)
+#define REST_16VSRSU(n,b,base)	REST_8VSRSU(n,b,base); REST_8VSRSU(n+8,b,base)
+#define REST_32VSRSU(n,b,base)	REST_16VSRSU(n,b,base); REST_16VSRSU(n+16,b,base)
+
+#define SAVE_EVR(n,s,base)	evmergehi s,s,n; stw s,THREAD_EVR0+4*(n)(base)
+#define SAVE_2EVRS(n,s,base)	SAVE_EVR(n,s,base); SAVE_EVR(n+1,s,base)
+#define SAVE_4EVRS(n,s,base)	SAVE_2EVRS(n,s,base); SAVE_2EVRS(n+2,s,base)
+#define SAVE_8EVRS(n,s,base)	SAVE_4EVRS(n,s,base); SAVE_4EVRS(n+4,s,base)
+#define SAVE_16EVRS(n,s,base)	SAVE_8EVRS(n,s,base); SAVE_8EVRS(n+8,s,base)
+#define SAVE_32EVRS(n,s,base)	SAVE_16EVRS(n,s,base); SAVE_16EVRS(n+16,s,base)
+#define REST_EVR(n,s,base)	lwz s,THREAD_EVR0+4*(n)(base); evmergelo n,s,n
+#define REST_2EVRS(n,s,base)	REST_EVR(n,s,base); REST_EVR(n+1,s,base)
+#define REST_4EVRS(n,s,base)	REST_2EVRS(n,s,base); REST_2EVRS(n+2,s,base)
+#define REST_8EVRS(n,s,base)	REST_4EVRS(n,s,base); REST_4EVRS(n+4,s,base)
+#define REST_16EVRS(n,s,base)	REST_8EVRS(n,s,base); REST_8EVRS(n+8,s,base)
+#define REST_32EVRS(n,s,base)	REST_16EVRS(n,s,base); REST_16EVRS(n+16,s,base)
+
+/* Macros to adjust thread priority for hardware multithreading */
+#define HMT_VERY_LOW	or	31,31,31	# very low priority
+#define HMT_LOW		or	1,1,1
+#define HMT_MEDIUM_LOW  or	6,6,6		# medium low priority
+#define HMT_MEDIUM	or	2,2,2
+#define HMT_MEDIUM_HIGH or	5,5,5		# medium high priority
+#define HMT_HIGH	or	3,3,3
+
+/* handle instructions that older assemblers may not know */
+#define RFCI		.long 0x4c000066	/* rfci instruction */
+#define RFDI		.long 0x4c00004e	/* rfdi instruction */
+#define RFMCI		.long 0x4c00004c	/* rfmci instruction */
+
+#ifdef __KERNEL__
+#ifdef CONFIG_PPC64
+
+#define XGLUE(a,b) a##b
+#define GLUE(a,b) XGLUE(a,b)
+
+#define _GLOBAL(name) \
+	.section ".text"; \
+	.align 2 ; \
+	.globl name; \
+	.globl GLUE(.,name); \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _INIT_GLOBAL(name) \
+	.section ".text.init.refok"; \
+	.align 2 ; \
+	.globl name; \
+	.globl GLUE(.,name); \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _KPROBE(name) \
+	.section ".kprobes.text","a"; \
+	.align 2 ; \
+	.globl name; \
+	.globl GLUE(.,name); \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _STATIC(name) \
+	.section ".text"; \
+	.align 2 ; \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#define _INIT_STATIC(name) \
+	.section ".text.init.refok"; \
+	.align 2 ; \
+	.section ".opd","aw"; \
+name: \
+	.quad GLUE(.,name); \
+	.quad .TOC.@tocbase; \
+	.quad 0; \
+	.previous; \
+	.type GLUE(.,name),@function; \
+GLUE(.,name):
+
+#else /* 32-bit */
+
+#define _ENTRY(n)	\
+	.globl n;	\
+n:
+
+#define _GLOBAL(n)	\
+	.text;		\
+	.stabs __stringify(n:F-1),N_FUN,0,0,n;\
+	.globl n;	\
+n:
+
+#define _KPROBE(n)	\
+	.section ".kprobes.text","a";	\
+	.globl	n;	\
+n:
+
+#endif
+
+/* 
+ * LOAD_REG_IMMEDIATE(rn, expr)
+ *   Loads the value of the constant expression 'expr' into register 'rn'
+ *   using immediate instructions only.  Use this when it's important not
+ *   to reference other data (i.e. on ppc64 when the TOC pointer is not
+ *   valid).
+ *
+ * LOAD_REG_ADDR(rn, name)
+ *   Loads the address of label 'name' into register 'rn'.  Use this when
+ *   you don't particularly need immediate instructions only, but you need
+ *   the whole address in one register (e.g. it's a structure address and
+ *   you want to access various offsets within it).  On ppc32 this is
+ *   identical to LOAD_REG_IMMEDIATE.
+ *
+ * LOAD_REG_ADDRBASE(rn, name)
+ * ADDROFF(name)
+ *   LOAD_REG_ADDRBASE loads part of the address of label 'name' into
+ *   register 'rn'.  ADDROFF(name) returns the remainder of the address as
+ *   a constant expression.  ADDROFF(name) is a signed expression < 16 bits
+ *   in size, so is suitable for use directly as an offset in load and store
+ *   instructions.  Use this when loading/storing a single word or less as:
+ *      LOAD_REG_ADDRBASE(rX, name)
+ *      ld	rY,ADDROFF(name)(rX)
+ */
+#ifdef __powerpc64__
+#define LOAD_REG_IMMEDIATE(reg,expr)		\
+	lis     (reg),(expr)@highest;		\
+	ori     (reg),(reg),(expr)@higher;	\
+	rldicr  (reg),(reg),32,31;		\
+	oris    (reg),(reg),(expr)@h;		\
+	ori     (reg),(reg),(expr)@l;
+
+#define LOAD_REG_ADDR(reg,name)			\
+	ld	(reg),name@got(r2)
+
+#define LOAD_REG_ADDRBASE(reg,name)	LOAD_REG_ADDR(reg,name)
+#define ADDROFF(name)			0
+
+/* offsets for stack frame layout */
+#define LRSAVE	16
+
+#else /* 32-bit */
+
+#define LOAD_REG_IMMEDIATE(reg,expr)		\
+	lis	(reg),(expr)@ha;		\
+	addi	(reg),(reg),(expr)@l;
+
+#define LOAD_REG_ADDR(reg,name)		LOAD_REG_IMMEDIATE(reg, name)
+
+#define LOAD_REG_ADDRBASE(reg, name)	lis	(reg),name@ha
+#define ADDROFF(name)			name@l
+
+/* offsets for stack frame layout */
+#define LRSAVE	4
+
+#endif
+
+/* various errata or part fixups */
+#ifdef CONFIG_PPC601_SYNC_FIX
+#define SYNC				\
+BEGIN_FTR_SECTION			\
+	sync;				\
+	isync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#define SYNC_601			\
+BEGIN_FTR_SECTION			\
+	sync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#define ISYNC_601			\
+BEGIN_FTR_SECTION			\
+	isync;				\
+END_FTR_SECTION_IFSET(CPU_FTR_601)
+#else
+#define	SYNC
+#define SYNC_601
+#define ISYNC_601
+#endif
+
+#ifdef CONFIG_PPC_CELL
+#define MFTB(dest)			\
+90:	mftb  dest;			\
+BEGIN_FTR_SECTION_NESTED(96);		\
+	cmpwi dest,0;			\
+	beq-  90b;			\
+END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96)
+#else
+#define MFTB(dest)			mftb dest
+#endif
+
+#ifndef CONFIG_SMP
+#define TLBSYNC
+#else /* CONFIG_SMP */
+/* tlbsync is not implemented on 601 */
+#define TLBSYNC				\
+BEGIN_FTR_SECTION			\
+	tlbsync;			\
+	sync;				\
+END_FTR_SECTION_IFCLR(CPU_FTR_601)
+#endif
+
+	
+/*
+ * This instruction is not implemented on the PPC 603 or 601; however, on
+ * the 403GCX and 405GP tlbia IS defined and tlbie is not.
+ * All of these instructions exist in the 8xx, they have magical powers,
+ * and they must be used.
+ */
+
+#if !defined(CONFIG_4xx) && !defined(CONFIG_8xx)
+#define tlbia					\
+	li	r4,1024;			\
+	mtctr	r4;				\
+	lis	r4,KERNELBASE@h;		\
+0:	tlbie	r4;				\
+	addi	r4,r4,0x1000;			\
+	bdnz	0b
+#endif
+
+
+#ifdef CONFIG_IBM440EP_ERR42
+#define PPC440EP_ERR42 isync
+#else
+#define PPC440EP_ERR42
+#endif
+
+
+#if defined(CONFIG_BOOKE)
+#define toreal(rd)
+#define fromreal(rd)
+
+/*
+ * We use addis to ensure compatibility with the "classic" ppc versions of
+ * these macros, which use rs = 0 to get the tophys offset in rd, rather than
+ * converting the address in r0, and so this version has to do that too
+ * (i.e. set register rd to 0 when rs == 0).
+ */
+#define tophys(rd,rs)				\
+	addis	rd,rs,0
+
+#define tovirt(rd,rs)				\
+	addis	rd,rs,0
+
+#elif defined(CONFIG_PPC64)
+#define toreal(rd)		/* we can access c000... in real mode */
+#define fromreal(rd)
+
+#define tophys(rd,rs)                           \
+	clrldi	rd,rs,2
+
+#define tovirt(rd,rs)                           \
+	rotldi	rd,rs,16;			\
+	ori	rd,rd,((KERNELBASE>>48)&0xFFFF);\
+	rotldi	rd,rd,48
+#else
+/*
+ * On APUS (Amiga PowerPC cpu upgrade board), we don't know the
+ * physical base address of RAM at compile time.
+ */
+#define toreal(rd)	tophys(rd,rd)
+#define fromreal(rd)	tovirt(rd,rd)
+
+#define tophys(rd,rs)				\
+0:	addis	rd,rs,-KERNELBASE@h;		\
+	.section ".vtop_fixup","aw";		\
+	.align  1;				\
+	.long   0b;				\
+	.previous
+
+#define tovirt(rd,rs)				\
+0:	addis	rd,rs,KERNELBASE@h;		\
+	.section ".ptov_fixup","aw";		\
+	.align  1;				\
+	.long   0b;				\
+	.previous
+#endif
+
+#ifdef CONFIG_PPC64
+#define RFI		rfid
+#define MTMSRD(r)	mtmsrd	r
+
+#else
+#define FIX_SRR1(ra, rb)
+#ifndef CONFIG_40x
+#define	RFI		rfi
+#else
+#define RFI		rfi; b .	/* Prevent prefetch past rfi */
+#endif
+#define MTMSRD(r)	mtmsr	r
+#define CLR_TOP32(r)
+#endif
+
+#endif /* __KERNEL__ */
+
+/* The boring bits... */
+
+/* Condition Register Bit Fields */
+
+#define	cr0	0
+#define	cr1	1
+#define	cr2	2
+#define	cr3	3
+#define	cr4	4
+#define	cr5	5
+#define	cr6	6
+#define	cr7	7
+
+
+/* General Purpose Registers (GPRs) */
+
+#define	r0	0
+#define	r1	1
+#define	r2	2
+#define	r3	3
+#define	r4	4
+#define	r5	5
+#define	r6	6
+#define	r7	7
+#define	r8	8
+#define	r9	9
+#define	r10	10
+#define	r11	11
+#define	r12	12
+#define	r13	13
+#define	r14	14
+#define	r15	15
+#define	r16	16
+#define	r17	17
+#define	r18	18
+#define	r19	19
+#define	r20	20
+#define	r21	21
+#define	r22	22
+#define	r23	23
+#define	r24	24
+#define	r25	25
+#define	r26	26
+#define	r27	27
+#define	r28	28
+#define	r29	29
+#define	r30	30
+#define	r31	31
+
+
+/* Floating Point Registers (FPRs) */
+
+#define	fr0	0
+#define	fr1	1
+#define	fr2	2
+#define	fr3	3
+#define	fr4	4
+#define	fr5	5
+#define	fr6	6
+#define	fr7	7
+#define	fr8	8
+#define	fr9	9
+#define	fr10	10
+#define	fr11	11
+#define	fr12	12
+#define	fr13	13
+#define	fr14	14
+#define	fr15	15
+#define	fr16	16
+#define	fr17	17
+#define	fr18	18
+#define	fr19	19
+#define	fr20	20
+#define	fr21	21
+#define	fr22	22
+#define	fr23	23
+#define	fr24	24
+#define	fr25	25
+#define	fr26	26
+#define	fr27	27
+#define	fr28	28
+#define	fr29	29
+#define	fr30	30
+#define	fr31	31
+
+/* AltiVec Registers (VPRs) */
+
+#define	vr0	0
+#define	vr1	1
+#define	vr2	2
+#define	vr3	3
+#define	vr4	4
+#define	vr5	5
+#define	vr6	6
+#define	vr7	7
+#define	vr8	8
+#define	vr9	9
+#define	vr10	10
+#define	vr11	11
+#define	vr12	12
+#define	vr13	13
+#define	vr14	14
+#define	vr15	15
+#define	vr16	16
+#define	vr17	17
+#define	vr18	18
+#define	vr19	19
+#define	vr20	20
+#define	vr21	21
+#define	vr22	22
+#define	vr23	23
+#define	vr24	24
+#define	vr25	25
+#define	vr26	26
+#define	vr27	27
+#define	vr28	28
+#define	vr29	29
+#define	vr30	30
+#define	vr31	31
+
+/* VSX Registers (VSRs) */
+
+#define	vsr0	0
+#define	vsr1	1
+#define	vsr2	2
+#define	vsr3	3
+#define	vsr4	4
+#define	vsr5	5
+#define	vsr6	6
+#define	vsr7	7
+#define	vsr8	8
+#define	vsr9	9
+#define	vsr10	10
+#define	vsr11	11
+#define	vsr12	12
+#define	vsr13	13
+#define	vsr14	14
+#define	vsr15	15
+#define	vsr16	16
+#define	vsr17	17
+#define	vsr18	18
+#define	vsr19	19
+#define	vsr20	20
+#define	vsr21	21
+#define	vsr22	22
+#define	vsr23	23
+#define	vsr24	24
+#define	vsr25	25
+#define	vsr26	26
+#define	vsr27	27
+#define	vsr28	28
+#define	vsr29	29
+#define	vsr30	30
+#define	vsr31	31
+#define	vsr32	32
+#define	vsr33	33
+#define	vsr34	34
+#define	vsr35	35
+#define	vsr36	36
+#define	vsr37	37
+#define	vsr38	38
+#define	vsr39	39
+#define	vsr40	40
+#define	vsr41	41
+#define	vsr42	42
+#define	vsr43	43
+#define	vsr44	44
+#define	vsr45	45
+#define	vsr46	46
+#define	vsr47	47
+#define	vsr48	48
+#define	vsr49	49
+#define	vsr50	50
+#define	vsr51	51
+#define	vsr52	52
+#define	vsr53	53
+#define	vsr54	54
+#define	vsr55	55
+#define	vsr56	56
+#define	vsr57	57
+#define	vsr58	58
+#define	vsr59	59
+#define	vsr60	60
+#define	vsr61	61
+#define	vsr62	62
+#define	vsr63	63
+
+/* SPE Registers (EVPRs) */
+
+#define	evr0	0
+#define	evr1	1
+#define	evr2	2
+#define	evr3	3
+#define	evr4	4
+#define	evr5	5
+#define	evr6	6
+#define	evr7	7
+#define	evr8	8
+#define	evr9	9
+#define	evr10	10
+#define	evr11	11
+#define	evr12	12
+#define	evr13	13
+#define	evr14	14
+#define	evr15	15
+#define	evr16	16
+#define	evr17	17
+#define	evr18	18
+#define	evr19	19
+#define	evr20	20
+#define	evr21	21
+#define	evr22	22
+#define	evr23	23
+#define	evr24	24
+#define	evr25	25
+#define	evr26	26
+#define	evr27	27
+#define	evr28	28
+#define	evr29	29
+#define	evr30	30
+#define	evr31	31
+
+/* some stab codes */
+#define N_FUN	36
+#define N_RSYM	64
+#define N_SLINE	68
+#define N_SO	100
+
+#endif /*  __ASSEMBLY__ */
+
+#endif /* _ASM_POWERPC_PPC_ASM_H */
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
new file mode 100644
index 000000000000..101ed87f7d84
--- /dev/null
+++ b/arch/powerpc/include/asm/processor.h
@@ -0,0 +1,314 @@
+#ifndef _ASM_POWERPC_PROCESSOR_H
+#define _ASM_POWERPC_PROCESSOR_H
+
+/*
+ * Copyright (C) 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/reg.h>
+
+#ifdef CONFIG_VSX
+#define TS_FPRWIDTH 2
+#else
+#define TS_FPRWIDTH 1
+#endif
+
+#ifndef __ASSEMBLY__
+#include <linux/compiler.h>
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+/* We do _not_ want to define new machine types at all, those must die
+ * in favor of using the device-tree
+ * -- BenH.
+ */
+
+/* PREP sub-platform types see residual.h for these */
+#define _PREP_Motorola	0x01	/* motorola prep */
+#define _PREP_Firm	0x02	/* firmworks prep */
+#define _PREP_IBM	0x00	/* ibm prep */
+#define _PREP_Bull	0x03	/* bull prep */
+
+/* CHRP sub-platform types. These are arbitrary */
+#define _CHRP_Motorola	0x04	/* motorola chrp, the cobra */
+#define _CHRP_IBM	0x05	/* IBM chrp, the longtrail and longtrail 2 */
+#define _CHRP_Pegasos	0x06	/* Genesi/bplan's Pegasos and Pegasos2 */
+#define _CHRP_briq	0x07	/* TotalImpact's briQ */
+
+#if defined(__KERNEL__) && defined(CONFIG_PPC32)
+
+extern int _chrp_type;
+
+#ifdef CONFIG_PPC_PREP
+
+/* what kind of prep workstation we are */
+extern int _prep_type;
+
+#endif /* CONFIG_PPC_PREP */
+
+#endif /* defined(__KERNEL__) && defined(CONFIG_PPC32) */
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+/* Macros for adjusting thread priority (hardware multi-threading) */
+#define HMT_very_low()   asm volatile("or 31,31,31   # very low priority")
+#define HMT_low()	 asm volatile("or 1,1,1	     # low priority")
+#define HMT_medium_low() asm volatile("or 6,6,6      # medium low priority")
+#define HMT_medium()	 asm volatile("or 2,2,2	     # medium priority")
+#define HMT_medium_high() asm volatile("or 5,5,5      # medium high priority")
+#define HMT_high()	 asm volatile("or 3,3,3	     # high priority")
+
+#ifdef __KERNEL__
+
+extern int have_of;
+
+struct task_struct;
+void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp);
+void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+extern void prepare_to_copy(struct task_struct *tsk);
+
+/* Create a new kernel thread. */
+extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
+
+/* Lazy FPU handling on uni-processor */
+extern struct task_struct *last_task_used_math;
+extern struct task_struct *last_task_used_altivec;
+extern struct task_struct *last_task_used_vsx;
+extern struct task_struct *last_task_used_spe;
+
+#ifdef CONFIG_PPC32
+
+#if CONFIG_TASK_SIZE > CONFIG_KERNEL_START
+#error User TASK_SIZE overlaps with KERNEL_START address
+#endif
+#define TASK_SIZE	(CONFIG_TASK_SIZE)
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(TASK_SIZE / 8 * 3)
+#endif
+
+#ifdef CONFIG_PPC64
+/* 64-bit user address space is 44-bits (16TB user VM) */
+#define TASK_SIZE_USER64 (0x0000100000000000UL)
+
+/* 
+ * 32-bit user address space is 4GB - 1 page 
+ * (this 1 page is needed so referencing of 0xFFFFFFFF generates EFAULT
+ */
+#define TASK_SIZE_USER32 (0x0000000100000000UL - (1*PAGE_SIZE))
+
+#define TASK_SIZE_OF(tsk) (test_tsk_thread_flag(tsk, TIF_32BIT) ? \
+		TASK_SIZE_USER32 : TASK_SIZE_USER64)
+#define TASK_SIZE	  TASK_SIZE_OF(current)
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4))
+#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(TASK_SIZE_USER64 / 4))
+
+#define TASK_UNMAPPED_BASE ((test_thread_flag(TIF_32BIT)) ? \
+		TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 )
+#endif
+
+#ifdef __KERNEL__
+#ifdef __powerpc64__
+
+#define STACK_TOP_USER64 TASK_SIZE_USER64
+#define STACK_TOP_USER32 TASK_SIZE_USER32
+
+#define STACK_TOP (test_thread_flag(TIF_32BIT) ? \
+		   STACK_TOP_USER32 : STACK_TOP_USER64)
+
+#define STACK_TOP_MAX STACK_TOP_USER64
+
+#else /* __powerpc64__ */
+
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+
+#endif /* __powerpc64__ */
+#endif /* __KERNEL__ */
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define TS_FPROFFSET 0
+#define TS_VSRLOWOFFSET 1
+#define TS_FPR(i) fpr[i][TS_FPROFFSET]
+
+struct thread_struct {
+	unsigned long	ksp;		/* Kernel stack pointer */
+	unsigned long	ksp_limit;	/* if ksp <= ksp_limit stack overflow */
+
+#ifdef CONFIG_PPC64
+	unsigned long	ksp_vsid;
+#endif
+	struct pt_regs	*regs;		/* Pointer to saved register state */
+	mm_segment_t	fs;		/* for get_fs() validation */
+#ifdef CONFIG_PPC32
+	void		*pgdir;		/* root of page-table tree */
+#endif
+#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE)
+	unsigned long	dbcr0;		/* debug control register values */
+	unsigned long	dbcr1;
+#endif
+	/* FP and VSX 0-31 register set */
+	double		fpr[32][TS_FPRWIDTH];
+	struct {
+
+		unsigned int pad;
+		unsigned int val;	/* Floating point status */
+	} fpscr;
+	int		fpexc_mode;	/* floating-point exception mode */
+	unsigned int	align_ctl;	/* alignment handling control */
+#ifdef CONFIG_PPC64
+	unsigned long	start_tb;	/* Start purr when proc switched in */
+	unsigned long	accum_tb;	/* Total accumilated purr for process */
+#endif
+	unsigned long	dabr;		/* Data address breakpoint register */
+#ifdef CONFIG_ALTIVEC
+	/* Complete AltiVec register set */
+	vector128	vr[32] __attribute__((aligned(16)));
+	/* AltiVec status */
+	vector128	vscr __attribute__((aligned(16)));
+	unsigned long	vrsave;
+	int		used_vr;	/* set if process has used altivec */
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	/* VSR status */
+	int		used_vsr;	/* set if process has used altivec */
+#endif /* CONFIG_VSX */
+#ifdef CONFIG_SPE
+	unsigned long	evr[32];	/* upper 32-bits of SPE regs */
+	u64		acc;		/* Accumulator */
+	unsigned long	spefscr;	/* SPE & eFP status */
+	int		used_spe;	/* set if process has used spe */
+#endif /* CONFIG_SPE */
+};
+
+#define ARCH_MIN_TASKALIGN 16
+
+#define INIT_SP		(sizeof(init_stack) + (unsigned long) &init_stack)
+#define INIT_SP_LIMIT \
+	(_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack)
+
+
+#ifdef CONFIG_PPC32
+#define INIT_THREAD { \
+	.ksp = INIT_SP, \
+	.ksp_limit = INIT_SP_LIMIT, \
+	.fs = KERNEL_DS, \
+	.pgdir = swapper_pg_dir, \
+	.fpexc_mode = MSR_FE0 | MSR_FE1, \
+}
+#else
+#define INIT_THREAD  { \
+	.ksp = INIT_SP, \
+	.ksp_limit = INIT_SP_LIMIT, \
+	.regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \
+	.fs = KERNEL_DS, \
+	.fpr = {{0}}, \
+	.fpscr = { .val = 0, }, \
+	.fpexc_mode = 0, \
+}
+#endif
+
+/*
+ * Return saved PC of a blocked thread. For now, this is the "user" PC
+ */
+#define thread_saved_pc(tsk)    \
+        ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
+
+#define task_pt_regs(tsk)	((struct pt_regs *)(tsk)->thread.regs)
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)  ((tsk)->thread.regs? (tsk)->thread.regs->nip: 0)
+#define KSTK_ESP(tsk)  ((tsk)->thread.regs? (tsk)->thread.regs->gpr[1]: 0)
+
+/* Get/set floating-point exception mode */
+#define GET_FPEXC_CTL(tsk, adr) get_fpexc_mode((tsk), (adr))
+#define SET_FPEXC_CTL(tsk, val) set_fpexc_mode((tsk), (val))
+
+extern int get_fpexc_mode(struct task_struct *tsk, unsigned long adr);
+extern int set_fpexc_mode(struct task_struct *tsk, unsigned int val);
+
+#define GET_ENDIAN(tsk, adr) get_endian((tsk), (adr))
+#define SET_ENDIAN(tsk, val) set_endian((tsk), (val))
+
+extern int get_endian(struct task_struct *tsk, unsigned long adr);
+extern int set_endian(struct task_struct *tsk, unsigned int val);
+
+#define GET_UNALIGN_CTL(tsk, adr)	get_unalign_ctl((tsk), (adr))
+#define SET_UNALIGN_CTL(tsk, val)	set_unalign_ctl((tsk), (val))
+
+extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr);
+extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val);
+
+static inline unsigned int __unpack_fe01(unsigned long msr_bits)
+{
+	return ((msr_bits & MSR_FE0) >> 10) | ((msr_bits & MSR_FE1) >> 8);
+}
+
+static inline unsigned long __pack_fe01(unsigned int fpmode)
+{
+	return ((fpmode << 10) & MSR_FE0) | ((fpmode << 8) & MSR_FE1);
+}
+
+#ifdef CONFIG_PPC64
+#define cpu_relax()	do { HMT_low(); HMT_medium(); barrier(); } while (0)
+#else
+#define cpu_relax()	barrier()
+#endif
+
+/* Check that a certain kernel stack pointer is valid in task_struct p */
+int validate_sp(unsigned long sp, struct task_struct *p,
+                       unsigned long nbytes);
+
+/*
+ * Prefetch macros.
+ */
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+static inline void prefetch(const void *x)
+{
+	if (unlikely(!x))
+		return;
+
+	__asm__ __volatile__ ("dcbt 0,%0" : : "r" (x));
+}
+
+static inline void prefetchw(const void *x)
+{
+	if (unlikely(!x))
+		return;
+
+	__asm__ __volatile__ ("dcbtst 0,%0" : : "r" (x));
+}
+
+#define spin_lock_prefetch(x)	prefetchw(x)
+
+#ifdef CONFIG_PPC64
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_POWERPC_PROCESSOR_H */
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
new file mode 100644
index 000000000000..eb3bd2e1c7f6
--- /dev/null
+++ b/arch/powerpc/include/asm/prom.h
@@ -0,0 +1,356 @@
+#ifndef _POWERPC_PROM_H
+#define _POWERPC_PROM_H
+#ifdef __KERNEL__
+
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/platform_device.h>
+#include <asm/irq.h>
+#include <asm/atomic.h>
+
+#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT	1
+#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT	1
+
+#define of_compat_cmp(s1, s2, l)	strcasecmp((s1), (s2))
+#define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
+#define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
+
+/* Definitions used by the flattened device tree */
+#define OF_DT_HEADER		0xd00dfeed	/* marker */
+#define OF_DT_BEGIN_NODE	0x1		/* Start of node, full name */
+#define OF_DT_END_NODE		0x2		/* End node */
+#define OF_DT_PROP		0x3		/* Property: name off, size,
+						 * content */
+#define OF_DT_NOP		0x4		/* nop */
+#define OF_DT_END		0x9
+
+#define OF_DT_VERSION		0x10
+
+/*
+ * This is what gets passed to the kernel by prom_init or kexec
+ *
+ * The dt struct contains the device tree structure, full pathes and
+ * property contents. The dt strings contain a separate block with just
+ * the strings for the property names, and is fully page aligned and
+ * self contained in a page, so that it can be kept around by the kernel,
+ * each property name appears only once in this page (cheap compression)
+ *
+ * the mem_rsvmap contains a map of reserved ranges of physical memory,
+ * passing it here instead of in the device-tree itself greatly simplifies
+ * the job of everybody. It's just a list of u64 pairs (base/size) that
+ * ends when size is 0
+ */
+struct boot_param_header
+{
+	u32	magic;			/* magic word OF_DT_HEADER */
+	u32	totalsize;		/* total size of DT block */
+	u32	off_dt_struct;		/* offset to structure */
+	u32	off_dt_strings;		/* offset to strings */
+	u32	off_mem_rsvmap;		/* offset to memory reserve map */
+	u32	version;		/* format version */
+	u32	last_comp_version;	/* last compatible version */
+	/* version 2 fields below */
+	u32	boot_cpuid_phys;	/* Physical CPU id we're booting on */
+	/* version 3 fields below */
+	u32	dt_strings_size;	/* size of the DT strings block */
+	/* version 17 fields below */
+	u32	dt_struct_size;		/* size of the DT structure block */
+};
+
+
+
+typedef u32 phandle;
+typedef u32 ihandle;
+
+struct property {
+	char	*name;
+	int	length;
+	void	*value;
+	struct property *next;
+};
+
+struct device_node {
+	const char *name;
+	const char *type;
+	phandle	node;
+	phandle linux_phandle;
+	char	*full_name;
+
+	struct	property *properties;
+	struct  property *deadprops; /* removed properties */
+	struct	device_node *parent;
+	struct	device_node *child;
+	struct	device_node *sibling;
+	struct	device_node *next;	/* next device of same type */
+	struct	device_node *allnext;	/* next in list of all nodes */
+	struct  proc_dir_entry *pde;	/* this node's proc directory */
+	struct  kref kref;
+	unsigned long _flags;
+	void	*data;
+};
+
+extern struct device_node *of_chosen;
+
+static inline int of_node_check_flag(struct device_node *n, unsigned long flag)
+{
+	return test_bit(flag, &n->_flags);
+}
+
+static inline void of_node_set_flag(struct device_node *n, unsigned long flag)
+{
+	set_bit(flag, &n->_flags);
+}
+
+
+#define HAVE_ARCH_DEVTREE_FIXUPS
+
+static inline void set_node_proc_entry(struct device_node *dn, struct proc_dir_entry *de)
+{
+	dn->pde = de;
+}
+
+
+extern struct device_node *of_find_all_nodes(struct device_node *prev);
+extern struct device_node *of_node_get(struct device_node *node);
+extern void of_node_put(struct device_node *node);
+
+/* For scanning the flat device-tree at boot time */
+extern int __init of_scan_flat_dt(int (*it)(unsigned long node,
+					    const char *uname, int depth,
+					    void *data),
+				  void *data);
+extern void* __init of_get_flat_dt_prop(unsigned long node, const char *name,
+					unsigned long *size);
+extern int __init of_flat_dt_is_compatible(unsigned long node, const char *name);
+extern unsigned long __init of_get_flat_dt_root(void);
+
+/* For updating the device tree at runtime */
+extern void of_attach_node(struct device_node *);
+extern void of_detach_node(struct device_node *);
+
+/* Other Prototypes */
+extern void finish_device_tree(void);
+extern void unflatten_device_tree(void);
+extern void early_init_devtree(void *);
+extern int machine_is_compatible(const char *compat);
+extern void print_properties(struct device_node *node);
+extern int prom_n_intr_cells(struct device_node* np);
+extern void prom_get_irq_senses(unsigned char *senses, int off, int max);
+extern int prom_add_property(struct device_node* np, struct property* prop);
+extern int prom_remove_property(struct device_node *np, struct property *prop);
+extern int prom_update_property(struct device_node *np,
+				struct property *newprop,
+				struct property *oldprop);
+
+#ifdef CONFIG_PPC32
+/*
+ * PCI <-> OF matching functions
+ * (XXX should these be here?)
+ */
+struct pci_bus;
+struct pci_dev;
+extern int pci_device_from_OF_node(struct device_node *node,
+				   u8* bus, u8* devfn);
+extern struct device_node* pci_busdev_to_OF_node(struct pci_bus *, int);
+extern struct device_node* pci_device_to_OF_node(struct pci_dev *);
+extern void pci_create_OF_bus_map(void);
+#endif
+
+extern struct resource *request_OF_resource(struct device_node* node,
+				int index, const char* name_postfix);
+extern int release_OF_resource(struct device_node* node, int index);
+
+
+/*
+ * OF address retreival & translation
+ */
+
+
+/* Helper to read a big number; size is in cells (not bytes) */
+static inline u64 of_read_number(const u32 *cell, int size)
+{
+	u64 r = 0;
+	while (size--)
+		r = (r << 32) | *(cell++);
+	return r;
+}
+
+/* Like of_read_number, but we want an unsigned long result */
+#ifdef CONFIG_PPC32
+static inline unsigned long of_read_ulong(const u32 *cell, int size)
+{
+	return cell[size-1];
+}
+#else
+#define of_read_ulong(cell, size)	of_read_number(cell, size)
+#endif
+
+/* Translate an OF address block into a CPU physical address
+ */
+extern u64 of_translate_address(struct device_node *np, const u32 *addr);
+
+/* Translate a DMA address from device space to CPU space */
+extern u64 of_translate_dma_address(struct device_node *dev,
+				    const u32 *in_addr);
+
+/* Extract an address from a device, returns the region size and
+ * the address space flags too. The PCI version uses a BAR number
+ * instead of an absolute index
+ */
+extern const u32 *of_get_address(struct device_node *dev, int index,
+			   u64 *size, unsigned int *flags);
+#ifdef CONFIG_PCI
+extern const u32 *of_get_pci_address(struct device_node *dev, int bar_no,
+			       u64 *size, unsigned int *flags);
+#else
+static inline const u32 *of_get_pci_address(struct device_node *dev,
+		int bar_no, u64 *size, unsigned int *flags)
+{
+	return NULL;
+}
+#endif /* CONFIG_PCI */
+
+/* Get an address as a resource. Note that if your address is
+ * a PIO address, the conversion will fail if the physical address
+ * can't be internally converted to an IO token with
+ * pci_address_to_pio(), that is because it's either called to early
+ * or it can't be matched to any host bridge IO space
+ */
+extern int of_address_to_resource(struct device_node *dev, int index,
+				  struct resource *r);
+#ifdef CONFIG_PCI
+extern int of_pci_address_to_resource(struct device_node *dev, int bar,
+				      struct resource *r);
+#else
+static inline int of_pci_address_to_resource(struct device_node *dev, int bar,
+		struct resource *r)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_PCI */
+
+/* Parse the ibm,dma-window property of an OF node into the busno, phys and
+ * size parameters.
+ */
+void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop,
+		unsigned long *busno, unsigned long *phys, unsigned long *size);
+
+extern void kdump_move_device_tree(void);
+
+/* CPU OF node matching */
+struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
+
+/* Get the MAC address */
+extern const void *of_get_mac_address(struct device_node *np);
+
+/*
+ * OF interrupt mapping
+ */
+
+/* This structure is returned when an interrupt is mapped. The controller
+ * field needs to be put() after use
+ */
+
+#define OF_MAX_IRQ_SPEC		 4 /* We handle specifiers of at most 4 cells */
+
+struct of_irq {
+	struct device_node *controller;	/* Interrupt controller node */
+	u32 size;			/* Specifier size */
+	u32 specifier[OF_MAX_IRQ_SPEC];	/* Specifier copy */
+};
+
+/**
+ * of_irq_map_init - Initialize the irq remapper
+ * @flags:	flags defining workarounds to enable
+ *
+ * Some machines have bugs in the device-tree which require certain workarounds
+ * to be applied. Call this before any interrupt mapping attempts to enable
+ * those workarounds.
+ */
+#define OF_IMAP_OLDWORLD_MAC	0x00000001
+#define OF_IMAP_NO_PHANDLE	0x00000002
+
+extern void of_irq_map_init(unsigned int flags);
+
+/**
+ * of_irq_map_raw - Low level interrupt tree parsing
+ * @parent:	the device interrupt parent
+ * @intspec:	interrupt specifier ("interrupts" property of the device)
+ * @ointsize:   size of the passed in interrupt specifier
+ * @addr:	address specifier (start of "reg" property of the device)
+ * @out_irq:	structure of_irq filled by this function
+ *
+ * Returns 0 on success and a negative number on error
+ *
+ * This function is a low-level interrupt tree walking function. It
+ * can be used to do a partial walk with synthetized reg and interrupts
+ * properties, for example when resolving PCI interrupts when no device
+ * node exist for the parent.
+ *
+ */
+
+extern int of_irq_map_raw(struct device_node *parent, const u32 *intspec,
+			  u32 ointsize, const u32 *addr,
+			  struct of_irq *out_irq);
+
+
+/**
+ * of_irq_map_one - Resolve an interrupt for a device
+ * @device:	the device whose interrupt is to be resolved
+ * @index:     	index of the interrupt to resolve
+ * @out_irq:	structure of_irq filled by this function
+ *
+ * This function resolves an interrupt, walking the tree, for a given
+ * device-tree node. It's the high level pendant to of_irq_map_raw().
+ * It also implements the workarounds for OldWolrd Macs.
+ */
+extern int of_irq_map_one(struct device_node *device, int index,
+			  struct of_irq *out_irq);
+
+/**
+ * of_irq_map_pci - Resolve the interrupt for a PCI device
+ * @pdev:	the device whose interrupt is to be resolved
+ * @out_irq:	structure of_irq filled by this function
+ *
+ * This function resolves the PCI interrupt for a given PCI device. If a
+ * device-node exists for a given pci_dev, it will use normal OF tree
+ * walking. If not, it will implement standard swizzling and walk up the
+ * PCI tree until an device-node is found, at which point it will finish
+ * resolving using the OF tree walking.
+ */
+struct pci_dev;
+extern int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq);
+
+extern int of_irq_to_resource(struct device_node *dev, int index,
+			struct resource *r);
+
+/**
+ * of_iomap - Maps the memory mapped IO for a given device_node
+ * @device:	the device whose io range will be mapped
+ * @index:	index of the io range
+ *
+ * Returns a pointer to the mapped memory
+ */
+extern void __iomem *of_iomap(struct device_node *device, int index);
+
+/*
+ * NB:  This is here while we transition from using asm/prom.h
+ * to linux/of.h
+ */
+#include <linux/of.h>
+
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_PROM_H */
diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h
new file mode 100644
index 000000000000..f9e34c493cbb
--- /dev/null
+++ b/arch/powerpc/include/asm/ps3.h
@@ -0,0 +1,519 @@
+/*
+ *  PS3 platform declarations.
+ *
+ *  Copyright (C) 2006 Sony Computer Entertainment Inc.
+ *  Copyright 2006 Sony Corp.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(_ASM_POWERPC_PS3_H)
+#define _ASM_POWERPC_PS3_H
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include "cell-pmu.h"
+
+union ps3_firmware_version {
+	u64 raw;
+	struct {
+		u16 pad;
+		u16 major;
+		u16 minor;
+		u16 rev;
+	};
+};
+
+void ps3_get_firmware_version(union ps3_firmware_version *v);
+int ps3_compare_firmware_version(u16 major, u16 minor, u16 rev);
+
+/* 'Other OS' area */
+
+enum ps3_param_av_multi_out {
+	PS3_PARAM_AV_MULTI_OUT_NTSC = 0,
+	PS3_PARAM_AV_MULTI_OUT_PAL_RGB = 1,
+	PS3_PARAM_AV_MULTI_OUT_PAL_YCBCR = 2,
+	PS3_PARAM_AV_MULTI_OUT_SECAM = 3,
+};
+
+enum ps3_param_av_multi_out ps3_os_area_get_av_multi_out(void);
+
+/* dma routines */
+
+enum ps3_dma_page_size {
+	PS3_DMA_4K = 12U,
+	PS3_DMA_64K = 16U,
+	PS3_DMA_1M = 20U,
+	PS3_DMA_16M = 24U,
+};
+
+enum ps3_dma_region_type {
+	PS3_DMA_OTHER = 0,
+	PS3_DMA_INTERNAL = 2,
+};
+
+struct ps3_dma_region_ops;
+
+/**
+ * struct ps3_dma_region - A per device dma state variables structure
+ * @did: The HV device id.
+ * @page_size: The ioc pagesize.
+ * @region_type: The HV region type.
+ * @bus_addr: The 'translated' bus address of the region.
+ * @len: The length in bytes of the region.
+ * @offset: The offset from the start of memory of the region.
+ * @ioid: The IOID of the device who owns this region
+ * @chunk_list: Opaque variable used by the ioc page manager.
+ * @region_ops: struct ps3_dma_region_ops - dma region operations
+ */
+
+struct ps3_dma_region {
+	struct ps3_system_bus_device *dev;
+	/* device variables */
+	const struct ps3_dma_region_ops *region_ops;
+	unsigned char ioid;
+	enum ps3_dma_page_size page_size;
+	enum ps3_dma_region_type region_type;
+	unsigned long len;
+	unsigned long offset;
+
+	/* driver variables  (set by ps3_dma_region_create) */
+	unsigned long bus_addr;
+	struct {
+		spinlock_t lock;
+		struct list_head head;
+	} chunk_list;
+};
+
+struct ps3_dma_region_ops {
+	int (*create)(struct ps3_dma_region *);
+	int (*free)(struct ps3_dma_region *);
+	int (*map)(struct ps3_dma_region *,
+		   unsigned long virt_addr,
+		   unsigned long len,
+		   unsigned long *bus_addr,
+		   u64 iopte_pp);
+	int (*unmap)(struct ps3_dma_region *,
+		     unsigned long bus_addr,
+		     unsigned long len);
+};
+/**
+ * struct ps3_dma_region_init - Helper to initialize structure variables
+ *
+ * Helper to properly initialize variables prior to calling
+ * ps3_system_bus_device_register.
+ */
+
+struct ps3_system_bus_device;
+
+int ps3_dma_region_init(struct ps3_system_bus_device *dev,
+	struct ps3_dma_region *r, enum ps3_dma_page_size page_size,
+	enum ps3_dma_region_type region_type, void *addr, unsigned long len);
+int ps3_dma_region_create(struct ps3_dma_region *r);
+int ps3_dma_region_free(struct ps3_dma_region *r);
+int ps3_dma_map(struct ps3_dma_region *r, unsigned long virt_addr,
+	unsigned long len, unsigned long *bus_addr,
+	u64 iopte_pp);
+int ps3_dma_unmap(struct ps3_dma_region *r, unsigned long bus_addr,
+	unsigned long len);
+
+/* mmio routines */
+
+enum ps3_mmio_page_size {
+	PS3_MMIO_4K = 12U,
+	PS3_MMIO_64K = 16U
+};
+
+struct ps3_mmio_region_ops;
+/**
+ * struct ps3_mmio_region - a per device mmio state variables structure
+ *
+ * Current systems can be supported with a single region per device.
+ */
+
+struct ps3_mmio_region {
+	struct ps3_system_bus_device *dev;
+	const struct ps3_mmio_region_ops *mmio_ops;
+	unsigned long bus_addr;
+	unsigned long len;
+	enum ps3_mmio_page_size page_size;
+	unsigned long lpar_addr;
+};
+
+struct ps3_mmio_region_ops {
+	int (*create)(struct ps3_mmio_region *);
+	int (*free)(struct ps3_mmio_region *);
+};
+/**
+ * struct ps3_mmio_region_init - Helper to initialize structure variables
+ *
+ * Helper to properly initialize variables prior to calling
+ * ps3_system_bus_device_register.
+ */
+
+int ps3_mmio_region_init(struct ps3_system_bus_device *dev,
+	struct ps3_mmio_region *r, unsigned long bus_addr, unsigned long len,
+	enum ps3_mmio_page_size page_size);
+int ps3_mmio_region_create(struct ps3_mmio_region *r);
+int ps3_free_mmio_region(struct ps3_mmio_region *r);
+unsigned long ps3_mm_phys_to_lpar(unsigned long phys_addr);
+
+/* inrerrupt routines */
+
+enum ps3_cpu_binding {
+	PS3_BINDING_CPU_ANY = -1,
+	PS3_BINDING_CPU_0 = 0,
+	PS3_BINDING_CPU_1 = 1,
+};
+
+int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
+	unsigned int *virq);
+int ps3_irq_plug_destroy(unsigned int virq);
+int ps3_event_receive_port_setup(enum ps3_cpu_binding cpu, unsigned int *virq);
+int ps3_event_receive_port_destroy(unsigned int virq);
+int ps3_send_event_locally(unsigned int virq);
+
+int ps3_io_irq_setup(enum ps3_cpu_binding cpu, unsigned int interrupt_id,
+	unsigned int *virq);
+int ps3_io_irq_destroy(unsigned int virq);
+int ps3_vuart_irq_setup(enum ps3_cpu_binding cpu, void* virt_addr_bmp,
+	unsigned int *virq);
+int ps3_vuart_irq_destroy(unsigned int virq);
+int ps3_spe_irq_setup(enum ps3_cpu_binding cpu, unsigned long spe_id,
+	unsigned int class, unsigned int *virq);
+int ps3_spe_irq_destroy(unsigned int virq);
+
+int ps3_sb_event_receive_port_setup(struct ps3_system_bus_device *dev,
+	enum ps3_cpu_binding cpu, unsigned int *virq);
+int ps3_sb_event_receive_port_destroy(struct ps3_system_bus_device *dev,
+	unsigned int virq);
+
+/* lv1 result codes */
+
+enum lv1_result {
+	LV1_SUCCESS                     = 0,
+	/* not used                       -1 */
+	LV1_RESOURCE_SHORTAGE           = -2,
+	LV1_NO_PRIVILEGE                = -3,
+	LV1_DENIED_BY_POLICY            = -4,
+	LV1_ACCESS_VIOLATION            = -5,
+	LV1_NO_ENTRY                    = -6,
+	LV1_DUPLICATE_ENTRY             = -7,
+	LV1_TYPE_MISMATCH               = -8,
+	LV1_BUSY                        = -9,
+	LV1_EMPTY                       = -10,
+	LV1_WRONG_STATE                 = -11,
+	/* not used                       -12 */
+	LV1_NO_MATCH                    = -13,
+	LV1_ALREADY_CONNECTED           = -14,
+	LV1_UNSUPPORTED_PARAMETER_VALUE = -15,
+	LV1_CONDITION_NOT_SATISFIED     = -16,
+	LV1_ILLEGAL_PARAMETER_VALUE     = -17,
+	LV1_BAD_OPTION                  = -18,
+	LV1_IMPLEMENTATION_LIMITATION   = -19,
+	LV1_NOT_IMPLEMENTED             = -20,
+	LV1_INVALID_CLASS_ID            = -21,
+	LV1_CONSTRAINT_NOT_SATISFIED    = -22,
+	LV1_ALIGNMENT_ERROR             = -23,
+	LV1_HARDWARE_ERROR              = -24,
+	LV1_INVALID_DATA_FORMAT         = -25,
+	LV1_INVALID_OPERATION           = -26,
+	LV1_INTERNAL_ERROR              = -32768,
+};
+
+static inline const char* ps3_result(int result)
+{
+#if defined(DEBUG)
+	switch (result) {
+	case LV1_SUCCESS:
+		return "LV1_SUCCESS (0)";
+	case -1:
+		return "** unknown result ** (-1)";
+	case LV1_RESOURCE_SHORTAGE:
+		return "LV1_RESOURCE_SHORTAGE (-2)";
+	case LV1_NO_PRIVILEGE:
+		return "LV1_NO_PRIVILEGE (-3)";
+	case LV1_DENIED_BY_POLICY:
+		return "LV1_DENIED_BY_POLICY (-4)";
+	case LV1_ACCESS_VIOLATION:
+		return "LV1_ACCESS_VIOLATION (-5)";
+	case LV1_NO_ENTRY:
+		return "LV1_NO_ENTRY (-6)";
+	case LV1_DUPLICATE_ENTRY:
+		return "LV1_DUPLICATE_ENTRY (-7)";
+	case LV1_TYPE_MISMATCH:
+		return "LV1_TYPE_MISMATCH (-8)";
+	case LV1_BUSY:
+		return "LV1_BUSY (-9)";
+	case LV1_EMPTY:
+		return "LV1_EMPTY (-10)";
+	case LV1_WRONG_STATE:
+		return "LV1_WRONG_STATE (-11)";
+	case -12:
+		return "** unknown result ** (-12)";
+	case LV1_NO_MATCH:
+		return "LV1_NO_MATCH (-13)";
+	case LV1_ALREADY_CONNECTED:
+		return "LV1_ALREADY_CONNECTED (-14)";
+	case LV1_UNSUPPORTED_PARAMETER_VALUE:
+		return "LV1_UNSUPPORTED_PARAMETER_VALUE (-15)";
+	case LV1_CONDITION_NOT_SATISFIED:
+		return "LV1_CONDITION_NOT_SATISFIED (-16)";
+	case LV1_ILLEGAL_PARAMETER_VALUE:
+		return "LV1_ILLEGAL_PARAMETER_VALUE (-17)";
+	case LV1_BAD_OPTION:
+		return "LV1_BAD_OPTION (-18)";
+	case LV1_IMPLEMENTATION_LIMITATION:
+		return "LV1_IMPLEMENTATION_LIMITATION (-19)";
+	case LV1_NOT_IMPLEMENTED:
+		return "LV1_NOT_IMPLEMENTED (-20)";
+	case LV1_INVALID_CLASS_ID:
+		return "LV1_INVALID_CLASS_ID (-21)";
+	case LV1_CONSTRAINT_NOT_SATISFIED:
+		return "LV1_CONSTRAINT_NOT_SATISFIED (-22)";
+	case LV1_ALIGNMENT_ERROR:
+		return "LV1_ALIGNMENT_ERROR (-23)";
+	case LV1_HARDWARE_ERROR:
+		return "LV1_HARDWARE_ERROR (-24)";
+	case LV1_INVALID_DATA_FORMAT:
+		return "LV1_INVALID_DATA_FORMAT (-25)";
+	case LV1_INVALID_OPERATION:
+		return "LV1_INVALID_OPERATION (-26)";
+	case LV1_INTERNAL_ERROR:
+		return "LV1_INTERNAL_ERROR (-32768)";
+	default:
+		BUG();
+		return "** unknown result **";
+	};
+#else
+	return "";
+#endif
+}
+
+/* system bus routines */
+
+enum ps3_match_id {
+	PS3_MATCH_ID_EHCI           = 1,
+	PS3_MATCH_ID_OHCI           = 2,
+	PS3_MATCH_ID_GELIC          = 3,
+	PS3_MATCH_ID_AV_SETTINGS    = 4,
+	PS3_MATCH_ID_SYSTEM_MANAGER = 5,
+	PS3_MATCH_ID_STOR_DISK      = 6,
+	PS3_MATCH_ID_STOR_ROM       = 7,
+	PS3_MATCH_ID_STOR_FLASH     = 8,
+	PS3_MATCH_ID_SOUND          = 9,
+	PS3_MATCH_ID_GRAPHICS       = 10,
+	PS3_MATCH_ID_LPM            = 11,
+};
+
+#define PS3_MODULE_ALIAS_EHCI           "ps3:1"
+#define PS3_MODULE_ALIAS_OHCI           "ps3:2"
+#define PS3_MODULE_ALIAS_GELIC          "ps3:3"
+#define PS3_MODULE_ALIAS_AV_SETTINGS    "ps3:4"
+#define PS3_MODULE_ALIAS_SYSTEM_MANAGER "ps3:5"
+#define PS3_MODULE_ALIAS_STOR_DISK      "ps3:6"
+#define PS3_MODULE_ALIAS_STOR_ROM       "ps3:7"
+#define PS3_MODULE_ALIAS_STOR_FLASH     "ps3:8"
+#define PS3_MODULE_ALIAS_SOUND          "ps3:9"
+#define PS3_MODULE_ALIAS_GRAPHICS       "ps3:10"
+#define PS3_MODULE_ALIAS_LPM            "ps3:11"
+
+enum ps3_system_bus_device_type {
+	PS3_DEVICE_TYPE_IOC0 = 1,
+	PS3_DEVICE_TYPE_SB,
+	PS3_DEVICE_TYPE_VUART,
+	PS3_DEVICE_TYPE_LPM,
+};
+
+enum ps3_match_sub_id {
+	/* for PS3_MATCH_ID_GRAPHICS */
+	PS3_MATCH_SUB_ID_FB		= 1,
+};
+
+/**
+ * struct ps3_system_bus_device - a device on the system bus
+ */
+
+struct ps3_system_bus_device {
+	enum ps3_match_id match_id;
+	enum ps3_match_sub_id match_sub_id;
+	enum ps3_system_bus_device_type dev_type;
+
+	u64 bus_id;                       /* SB */
+	u64 dev_id;                       /* SB */
+	unsigned int interrupt_id;        /* SB */
+	struct ps3_dma_region *d_region;  /* SB, IOC0 */
+	struct ps3_mmio_region *m_region; /* SB, IOC0*/
+	unsigned int port_number;         /* VUART */
+	struct {                          /* LPM */
+		u64 node_id;
+		u64 pu_id;
+		u64 rights;
+	} lpm;
+
+/*	struct iommu_table *iommu_table; -- waiting for BenH's cleanups */
+	struct device core;
+	void *driver_priv; /* private driver variables */
+};
+
+int ps3_open_hv_device(struct ps3_system_bus_device *dev);
+int ps3_close_hv_device(struct ps3_system_bus_device *dev);
+
+/**
+ * struct ps3_system_bus_driver - a driver for a device on the system bus
+ */
+
+struct ps3_system_bus_driver {
+	enum ps3_match_id match_id;
+	enum ps3_match_sub_id match_sub_id;
+	struct device_driver core;
+	int (*probe)(struct ps3_system_bus_device *);
+	int (*remove)(struct ps3_system_bus_device *);
+	int (*shutdown)(struct ps3_system_bus_device *);
+/*	int (*suspend)(struct ps3_system_bus_device *, pm_message_t); */
+/*	int (*resume)(struct ps3_system_bus_device *); */
+};
+
+int ps3_system_bus_device_register(struct ps3_system_bus_device *dev);
+int ps3_system_bus_driver_register(struct ps3_system_bus_driver *drv);
+void ps3_system_bus_driver_unregister(struct ps3_system_bus_driver *drv);
+
+static inline struct ps3_system_bus_driver *ps3_drv_to_system_bus_drv(
+	struct device_driver *_drv)
+{
+	return container_of(_drv, struct ps3_system_bus_driver, core);
+}
+static inline struct ps3_system_bus_device *ps3_dev_to_system_bus_dev(
+	struct device *_dev)
+{
+	return container_of(_dev, struct ps3_system_bus_device, core);
+}
+static inline struct ps3_system_bus_driver *
+	ps3_system_bus_dev_to_system_bus_drv(struct ps3_system_bus_device *_dev)
+{
+	BUG_ON(!_dev);
+	BUG_ON(!_dev->core.driver);
+	return ps3_drv_to_system_bus_drv(_dev->core.driver);
+}
+
+/**
+ * ps3_system_bus_set_drvdata -
+ * @dev: device structure
+ * @data: Data to set
+ */
+
+static inline void ps3_system_bus_set_driver_data(
+	struct ps3_system_bus_device *dev, void *data)
+{
+	dev->core.driver_data = data;
+}
+static inline void *ps3_system_bus_get_driver_data(
+	struct ps3_system_bus_device *dev)
+{
+	return dev->core.driver_data;
+}
+
+/* These two need global scope for get_dma_ops(). */
+
+extern struct bus_type ps3_system_bus_type;
+
+/* system manager */
+
+struct ps3_sys_manager_ops {
+	struct ps3_system_bus_device *dev;
+	void (*power_off)(struct ps3_system_bus_device *dev);
+	void (*restart)(struct ps3_system_bus_device *dev);
+};
+
+void ps3_sys_manager_register_ops(const struct ps3_sys_manager_ops *ops);
+void __noreturn ps3_sys_manager_power_off(void);
+void __noreturn ps3_sys_manager_restart(void);
+void __noreturn ps3_sys_manager_halt(void);
+int ps3_sys_manager_get_wol(void);
+void ps3_sys_manager_set_wol(int state);
+
+struct ps3_prealloc {
+    const char *name;
+    void *address;
+    unsigned long size;
+    unsigned long align;
+};
+
+extern struct ps3_prealloc ps3fb_videomemory;
+extern struct ps3_prealloc ps3flash_bounce_buffer;
+
+/* logical performance monitor */
+
+/**
+ * enum ps3_lpm_rights - Rigths granted by the system policy module.
+ *
+ * @PS3_LPM_RIGHTS_USE_LPM: The right to use the lpm.
+ * @PS3_LPM_RIGHTS_USE_TB: The right to use the internal trace buffer.
+ */
+
+enum ps3_lpm_rights {
+	PS3_LPM_RIGHTS_USE_LPM = 0x001,
+	PS3_LPM_RIGHTS_USE_TB = 0x100,
+};
+
+/**
+ * enum ps3_lpm_tb_type - Type of trace buffer lv1 should use.
+ *
+ * @PS3_LPM_TB_TYPE_NONE: Do not use a trace buffer.
+ * @PS3_LPM_RIGHTS_USE_TB: Use the lv1 internal trace buffer.  Must have
+ *  rights @PS3_LPM_RIGHTS_USE_TB.
+ */
+
+enum ps3_lpm_tb_type {
+	PS3_LPM_TB_TYPE_NONE = 0,
+	PS3_LPM_TB_TYPE_INTERNAL = 1,
+};
+
+int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache,
+	u64 tb_cache_size);
+int ps3_lpm_close(void);
+int ps3_lpm_copy_tb(unsigned long offset, void *buf, unsigned long count,
+	unsigned long *bytes_copied);
+int ps3_lpm_copy_tb_to_user(unsigned long offset, void __user *buf,
+	unsigned long count, unsigned long *bytes_copied);
+void ps3_set_bookmark(u64 bookmark);
+void ps3_set_pm_bookmark(u64 tag, u64 incident, u64 th_id);
+int ps3_set_signal(u64 rtas_signal_group, u8 signal_bit, u16 sub_unit,
+	u8 bus_word);
+
+u32 ps3_read_phys_ctr(u32 cpu, u32 phys_ctr);
+void ps3_write_phys_ctr(u32 cpu, u32 phys_ctr, u32 val);
+u32 ps3_read_ctr(u32 cpu, u32 ctr);
+void ps3_write_ctr(u32 cpu, u32 ctr, u32 val);
+
+u32 ps3_read_pm07_control(u32 cpu, u32 ctr);
+void ps3_write_pm07_control(u32 cpu, u32 ctr, u32 val);
+u32 ps3_read_pm(u32 cpu, enum pm_reg_name reg);
+void ps3_write_pm(u32 cpu, enum pm_reg_name reg, u32 val);
+
+u32 ps3_get_ctr_size(u32 cpu, u32 phys_ctr);
+void ps3_set_ctr_size(u32 cpu, u32 phys_ctr, u32 ctr_size);
+
+void ps3_enable_pm(u32 cpu);
+void ps3_disable_pm(u32 cpu);
+void ps3_enable_pm_interrupts(u32 cpu, u32 thread, u32 mask);
+void ps3_disable_pm_interrupts(u32 cpu);
+
+u32 ps3_get_and_clear_pm_interrupts(u32 cpu);
+void ps3_sync_irq(int node);
+u32 ps3_get_hw_thread_id(int cpu);
+u64 ps3_get_spe_id(void *arg);
+
+#endif
diff --git a/arch/powerpc/include/asm/ps3av.h b/arch/powerpc/include/asm/ps3av.h
new file mode 100644
index 000000000000..fda98715cd35
--- /dev/null
+++ b/arch/powerpc/include/asm/ps3av.h
@@ -0,0 +1,744 @@
+/*
+ *  PS3 AV backend support.
+ *
+ *  Copyright (C) 2007 Sony Computer Entertainment Inc.
+ *  Copyright 2007 Sony Corp.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef _ASM_POWERPC_PS3AV_H_
+#define _ASM_POWERPC_PS3AV_H_
+
+/** command for ioctl() **/
+#define PS3AV_VERSION 0x205	/* version of ps3av command */
+
+#define PS3AV_CID_AV_INIT              0x00000001
+#define PS3AV_CID_AV_FIN               0x00000002
+#define PS3AV_CID_AV_GET_HW_CONF       0x00000003
+#define PS3AV_CID_AV_GET_MONITOR_INFO  0x00000004
+#define PS3AV_CID_AV_ENABLE_EVENT      0x00000006
+#define PS3AV_CID_AV_DISABLE_EVENT     0x00000007
+#define PS3AV_CID_AV_TV_MUTE           0x0000000a
+
+#define PS3AV_CID_AV_VIDEO_CS          0x00010001
+#define PS3AV_CID_AV_VIDEO_MUTE        0x00010002
+#define PS3AV_CID_AV_VIDEO_DISABLE_SIG 0x00010003
+#define PS3AV_CID_AV_AUDIO_PARAM       0x00020001
+#define PS3AV_CID_AV_AUDIO_MUTE        0x00020002
+#define PS3AV_CID_AV_HDMI_MODE         0x00040001
+
+#define PS3AV_CID_VIDEO_INIT           0x01000001
+#define PS3AV_CID_VIDEO_MODE           0x01000002
+#define PS3AV_CID_VIDEO_FORMAT         0x01000004
+#define PS3AV_CID_VIDEO_PITCH          0x01000005
+
+#define PS3AV_CID_AUDIO_INIT           0x02000001
+#define PS3AV_CID_AUDIO_MODE           0x02000002
+#define PS3AV_CID_AUDIO_MUTE           0x02000003
+#define PS3AV_CID_AUDIO_ACTIVE         0x02000004
+#define PS3AV_CID_AUDIO_INACTIVE       0x02000005
+#define PS3AV_CID_AUDIO_SPDIF_BIT      0x02000006
+#define PS3AV_CID_AUDIO_CTRL           0x02000007
+
+#define PS3AV_CID_EVENT_UNPLUGGED      0x10000001
+#define PS3AV_CID_EVENT_PLUGGED        0x10000002
+#define PS3AV_CID_EVENT_HDCP_DONE      0x10000003
+#define PS3AV_CID_EVENT_HDCP_FAIL      0x10000004
+#define PS3AV_CID_EVENT_HDCP_AUTH      0x10000005
+#define PS3AV_CID_EVENT_HDCP_ERROR     0x10000006
+
+#define PS3AV_CID_AVB_PARAM            0x04000001
+
+/* max backend ports */
+#define PS3AV_HDMI_MAX                 2	/* HDMI_0 HDMI_1 */
+#define PS3AV_AVMULTI_MAX              1	/* AVMULTI_0 */
+#define PS3AV_AV_PORT_MAX              (PS3AV_HDMI_MAX + PS3AV_AVMULTI_MAX)
+#define PS3AV_OPT_PORT_MAX             1	/* SPDIF0 */
+#define PS3AV_HEAD_MAX                 2	/* HEAD_A HEAD_B */
+
+/* num of pkt for PS3AV_CID_AVB_PARAM */
+#define PS3AV_AVB_NUM_VIDEO            PS3AV_HEAD_MAX
+#define PS3AV_AVB_NUM_AUDIO            0	/* not supported */
+#define PS3AV_AVB_NUM_AV_VIDEO         PS3AV_AV_PORT_MAX
+#define PS3AV_AVB_NUM_AV_AUDIO         PS3AV_HDMI_MAX
+
+#define PS3AV_MUTE_PORT_MAX            1	/* num of ports in mute pkt */
+
+/* event_bit */
+#define PS3AV_CMD_EVENT_BIT_UNPLUGGED			(1 << 0)
+#define PS3AV_CMD_EVENT_BIT_PLUGGED			(1 << 1)
+#define PS3AV_CMD_EVENT_BIT_HDCP_DONE			(1 << 2)
+#define PS3AV_CMD_EVENT_BIT_HDCP_FAIL			(1 << 3)
+#define PS3AV_CMD_EVENT_BIT_HDCP_REAUTH			(1 << 4)
+#define PS3AV_CMD_EVENT_BIT_HDCP_TOPOLOGY		(1 << 5)
+
+/* common params */
+/* mute */
+#define PS3AV_CMD_MUTE_OFF				0x0000
+#define PS3AV_CMD_MUTE_ON				0x0001
+/* avport */
+#define PS3AV_CMD_AVPORT_HDMI_0				0x0000
+#define PS3AV_CMD_AVPORT_HDMI_1				0x0001
+#define PS3AV_CMD_AVPORT_AVMULTI_0			0x0010
+#define PS3AV_CMD_AVPORT_SPDIF_0			0x0020
+#define PS3AV_CMD_AVPORT_SPDIF_1			0x0021
+
+/* for av backend */
+/* av_mclk */
+#define PS3AV_CMD_AV_MCLK_128				0x0000
+#define PS3AV_CMD_AV_MCLK_256				0x0001
+#define PS3AV_CMD_AV_MCLK_512				0x0003
+/* av_inputlen */
+#define PS3AV_CMD_AV_INPUTLEN_16			0x02
+#define PS3AV_CMD_AV_INPUTLEN_20			0x0a
+#define PS3AV_CMD_AV_INPUTLEN_24			0x0b
+/* alayout */
+#define PS3AV_CMD_AV_LAYOUT_32				(1 << 0)
+#define PS3AV_CMD_AV_LAYOUT_44				(1 << 1)
+#define PS3AV_CMD_AV_LAYOUT_48				(1 << 2)
+#define PS3AV_CMD_AV_LAYOUT_88				(1 << 3)
+#define PS3AV_CMD_AV_LAYOUT_96				(1 << 4)
+#define PS3AV_CMD_AV_LAYOUT_176				(1 << 5)
+#define PS3AV_CMD_AV_LAYOUT_192				(1 << 6)
+/* hdmi_mode */
+#define PS3AV_CMD_AV_HDMI_MODE_NORMAL			0xff
+#define PS3AV_CMD_AV_HDMI_HDCP_OFF			0x01
+#define PS3AV_CMD_AV_HDMI_EDID_PASS			0x80
+#define PS3AV_CMD_AV_HDMI_DVI				0x40
+
+/* for video module */
+/* video_head */
+#define PS3AV_CMD_VIDEO_HEAD_A				0x0000
+#define PS3AV_CMD_VIDEO_HEAD_B				0x0001
+/* video_cs_out video_cs_in */
+#define PS3AV_CMD_VIDEO_CS_NONE				0x0000
+#define PS3AV_CMD_VIDEO_CS_RGB_8			0x0001
+#define PS3AV_CMD_VIDEO_CS_YUV444_8			0x0002
+#define PS3AV_CMD_VIDEO_CS_YUV422_8			0x0003
+#define PS3AV_CMD_VIDEO_CS_XVYCC_8			0x0004
+#define PS3AV_CMD_VIDEO_CS_RGB_10			0x0005
+#define PS3AV_CMD_VIDEO_CS_YUV444_10			0x0006
+#define PS3AV_CMD_VIDEO_CS_YUV422_10			0x0007
+#define PS3AV_CMD_VIDEO_CS_XVYCC_10			0x0008
+#define PS3AV_CMD_VIDEO_CS_RGB_12			0x0009
+#define PS3AV_CMD_VIDEO_CS_YUV444_12			0x000a
+#define PS3AV_CMD_VIDEO_CS_YUV422_12			0x000b
+#define PS3AV_CMD_VIDEO_CS_XVYCC_12			0x000c
+/* video_vid */
+#define PS3AV_CMD_VIDEO_VID_NONE			0x0000
+#define PS3AV_CMD_VIDEO_VID_480I			0x0001
+#define PS3AV_CMD_VIDEO_VID_576I			0x0003
+#define PS3AV_CMD_VIDEO_VID_480P			0x0005
+#define PS3AV_CMD_VIDEO_VID_576P			0x0006
+#define PS3AV_CMD_VIDEO_VID_1080I_60HZ			0x0007
+#define PS3AV_CMD_VIDEO_VID_1080I_50HZ			0x0008
+#define PS3AV_CMD_VIDEO_VID_720P_60HZ			0x0009
+#define PS3AV_CMD_VIDEO_VID_720P_50HZ			0x000a
+#define PS3AV_CMD_VIDEO_VID_1080P_60HZ			0x000b
+#define PS3AV_CMD_VIDEO_VID_1080P_50HZ			0x000c
+#define PS3AV_CMD_VIDEO_VID_WXGA			0x000d
+#define PS3AV_CMD_VIDEO_VID_SXGA			0x000e
+#define PS3AV_CMD_VIDEO_VID_WUXGA			0x000f
+#define PS3AV_CMD_VIDEO_VID_480I_A			0x0010
+/* video_format */
+#define PS3AV_CMD_VIDEO_FORMAT_BLACK			0x0000
+#define PS3AV_CMD_VIDEO_FORMAT_ARGB_8BIT		0x0007
+/* video_order */
+#define PS3AV_CMD_VIDEO_ORDER_RGB			0x0000
+#define PS3AV_CMD_VIDEO_ORDER_BGR			0x0001
+/* video_fmt */
+#define PS3AV_CMD_VIDEO_FMT_X8R8G8B8			0x0000
+/* video_out_format */
+#define PS3AV_CMD_VIDEO_OUT_FORMAT_RGB_12BIT		0x0000
+/* video_cl_cnv */
+#define PS3AV_CMD_VIDEO_CL_CNV_ENABLE_LUT		0x0000
+#define PS3AV_CMD_VIDEO_CL_CNV_DISABLE_LUT		0x0010
+/* video_sync */
+#define PS3AV_CMD_VIDEO_SYNC_VSYNC			0x0001
+#define PS3AV_CMD_VIDEO_SYNC_CSYNC			0x0004
+#define PS3AV_CMD_VIDEO_SYNC_HSYNC			0x0010
+
+/* for audio module */
+/* num_of_ch */
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_2			0x0000
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_3			0x0001
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_4			0x0002
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_5			0x0003
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_6			0x0004
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_7			0x0005
+#define PS3AV_CMD_AUDIO_NUM_OF_CH_8			0x0006
+/* audio_fs */
+#define PS3AV_CMD_AUDIO_FS_32K				0x0001
+#define PS3AV_CMD_AUDIO_FS_44K				0x0002
+#define PS3AV_CMD_AUDIO_FS_48K				0x0003
+#define PS3AV_CMD_AUDIO_FS_88K				0x0004
+#define PS3AV_CMD_AUDIO_FS_96K				0x0005
+#define PS3AV_CMD_AUDIO_FS_176K				0x0006
+#define PS3AV_CMD_AUDIO_FS_192K				0x0007
+/* audio_word_bits */
+#define PS3AV_CMD_AUDIO_WORD_BITS_16			0x0001
+#define PS3AV_CMD_AUDIO_WORD_BITS_20			0x0002
+#define PS3AV_CMD_AUDIO_WORD_BITS_24			0x0003
+/* audio_format */
+#define PS3AV_CMD_AUDIO_FORMAT_PCM			0x0001
+#define PS3AV_CMD_AUDIO_FORMAT_BITSTREAM		0x00ff
+/* audio_source */
+#define PS3AV_CMD_AUDIO_SOURCE_SERIAL			0x0000
+#define PS3AV_CMD_AUDIO_SOURCE_SPDIF			0x0001
+/* audio_swap */
+#define PS3AV_CMD_AUDIO_SWAP_0				0x0000
+#define PS3AV_CMD_AUDIO_SWAP_1				0x0000
+/* audio_map */
+#define PS3AV_CMD_AUDIO_MAP_OUTPUT_0			0x0000
+#define PS3AV_CMD_AUDIO_MAP_OUTPUT_1			0x0001
+#define PS3AV_CMD_AUDIO_MAP_OUTPUT_2			0x0002
+#define PS3AV_CMD_AUDIO_MAP_OUTPUT_3			0x0003
+/* audio_layout */
+#define PS3AV_CMD_AUDIO_LAYOUT_2CH			0x0000
+#define PS3AV_CMD_AUDIO_LAYOUT_6CH			0x000b	/* LREClr */
+#define PS3AV_CMD_AUDIO_LAYOUT_8CH			0x001f	/* LREClrXY */
+/* audio_downmix */
+#define PS3AV_CMD_AUDIO_DOWNMIX_PERMITTED		0x0000
+#define PS3AV_CMD_AUDIO_DOWNMIX_PROHIBITED		0x0001
+
+/* audio_port */
+#define PS3AV_CMD_AUDIO_PORT_HDMI_0			( 1 << 0 )
+#define PS3AV_CMD_AUDIO_PORT_HDMI_1			( 1 << 1 )
+#define PS3AV_CMD_AUDIO_PORT_AVMULTI_0			( 1 << 10 )
+#define PS3AV_CMD_AUDIO_PORT_SPDIF_0			( 1 << 20 )
+#define PS3AV_CMD_AUDIO_PORT_SPDIF_1			( 1 << 21 )
+
+/* audio_ctrl_id */
+#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_RESET		0x0000
+#define PS3AV_CMD_AUDIO_CTRL_ID_DAC_DE_EMPHASIS		0x0001
+#define PS3AV_CMD_AUDIO_CTRL_ID_AVCLK			0x0002
+/* audio_ctrl_data[0] reset */
+#define PS3AV_CMD_AUDIO_CTRL_RESET_NEGATE		0x0000
+#define PS3AV_CMD_AUDIO_CTRL_RESET_ASSERT		0x0001
+/* audio_ctrl_data[0] de-emphasis */
+#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_OFF		0x0000
+#define PS3AV_CMD_AUDIO_CTRL_DE_EMPHASIS_ON		0x0001
+/* audio_ctrl_data[0] avclk */
+#define PS3AV_CMD_AUDIO_CTRL_AVCLK_22			0x0000
+#define PS3AV_CMD_AUDIO_CTRL_AVCLK_18			0x0001
+
+/* av_vid */
+/* do not use these params directly, use vid_video2av */
+#define PS3AV_CMD_AV_VID_480I				0x0000
+#define PS3AV_CMD_AV_VID_480P				0x0001
+#define PS3AV_CMD_AV_VID_720P_60HZ			0x0002
+#define PS3AV_CMD_AV_VID_1080I_60HZ			0x0003
+#define PS3AV_CMD_AV_VID_1080P_60HZ			0x0004
+#define PS3AV_CMD_AV_VID_576I				0x0005
+#define PS3AV_CMD_AV_VID_576P				0x0006
+#define PS3AV_CMD_AV_VID_720P_50HZ			0x0007
+#define PS3AV_CMD_AV_VID_1080I_50HZ			0x0008
+#define PS3AV_CMD_AV_VID_1080P_50HZ			0x0009
+#define PS3AV_CMD_AV_VID_WXGA				0x000a
+#define PS3AV_CMD_AV_VID_SXGA				0x000b
+#define PS3AV_CMD_AV_VID_WUXGA				0x000c
+/* av_cs_out av_cs_in */
+/* use cs_video2av() */
+#define PS3AV_CMD_AV_CS_RGB_8				0x0000
+#define PS3AV_CMD_AV_CS_YUV444_8			0x0001
+#define PS3AV_CMD_AV_CS_YUV422_8			0x0002
+#define PS3AV_CMD_AV_CS_XVYCC_8				0x0003
+#define PS3AV_CMD_AV_CS_RGB_10				0x0004
+#define PS3AV_CMD_AV_CS_YUV444_10			0x0005
+#define PS3AV_CMD_AV_CS_YUV422_10			0x0006
+#define PS3AV_CMD_AV_CS_XVYCC_10			0x0007
+#define PS3AV_CMD_AV_CS_RGB_12				0x0008
+#define PS3AV_CMD_AV_CS_YUV444_12			0x0009
+#define PS3AV_CMD_AV_CS_YUV422_12			0x000a
+#define PS3AV_CMD_AV_CS_XVYCC_12			0x000b
+#define PS3AV_CMD_AV_CS_8				0x0000
+#define PS3AV_CMD_AV_CS_10				0x0001
+#define PS3AV_CMD_AV_CS_12				0x0002
+/* dither */
+#define PS3AV_CMD_AV_DITHER_OFF				0x0000
+#define PS3AV_CMD_AV_DITHER_ON				0x0001
+#define PS3AV_CMD_AV_DITHER_8BIT			0x0000
+#define PS3AV_CMD_AV_DITHER_10BIT			0x0002
+#define PS3AV_CMD_AV_DITHER_12BIT			0x0004
+/* super_white */
+#define PS3AV_CMD_AV_SUPER_WHITE_OFF			0x0000
+#define PS3AV_CMD_AV_SUPER_WHITE_ON			0x0001
+/* aspect */
+#define PS3AV_CMD_AV_ASPECT_16_9			0x0000
+#define PS3AV_CMD_AV_ASPECT_4_3				0x0001
+/* video_cs_cnv() */
+#define PS3AV_CMD_VIDEO_CS_RGB				0x0001
+#define PS3AV_CMD_VIDEO_CS_YUV422			0x0002
+#define PS3AV_CMD_VIDEO_CS_YUV444			0x0003
+
+/* for broadcast automode */
+#define PS3AV_RESBIT_720x480P			0x0003	/* 0x0001 | 0x0002 */
+#define PS3AV_RESBIT_720x576P			0x0003	/* 0x0001 | 0x0002 */
+#define PS3AV_RESBIT_1280x720P			0x0004
+#define PS3AV_RESBIT_1920x1080I			0x0008
+#define PS3AV_RESBIT_1920x1080P			0x4000
+#define PS3AV_RES_MASK_60			(PS3AV_RESBIT_720x480P \
+						| PS3AV_RESBIT_1280x720P \
+						| PS3AV_RESBIT_1920x1080I \
+						| PS3AV_RESBIT_1920x1080P)
+#define PS3AV_RES_MASK_50			(PS3AV_RESBIT_720x576P \
+						| PS3AV_RESBIT_1280x720P \
+						| PS3AV_RESBIT_1920x1080I \
+						| PS3AV_RESBIT_1920x1080P)
+
+/* for VESA automode */
+#define PS3AV_RESBIT_VGA			0x0001
+#define PS3AV_RESBIT_WXGA			0x0002
+#define PS3AV_RESBIT_SXGA			0x0004
+#define PS3AV_RESBIT_WUXGA			0x0008
+#define PS3AV_RES_MASK_VESA			(PS3AV_RESBIT_WXGA |\
+						 PS3AV_RESBIT_SXGA |\
+						 PS3AV_RESBIT_WUXGA)
+
+#define PS3AV_MONITOR_TYPE_HDMI			1	/* HDMI */
+#define PS3AV_MONITOR_TYPE_DVI			2	/* DVI */
+
+
+/* for video mode */
+enum ps3av_mode_num {
+	PS3AV_MODE_AUTO				= 0,
+	PS3AV_MODE_480I				= 1,
+	PS3AV_MODE_480P				= 2,
+	PS3AV_MODE_720P60			= 3,
+	PS3AV_MODE_1080I60			= 4,
+	PS3AV_MODE_1080P60			= 5,
+	PS3AV_MODE_576I				= 6,
+	PS3AV_MODE_576P				= 7,
+	PS3AV_MODE_720P50			= 8,
+	PS3AV_MODE_1080I50			= 9,
+	PS3AV_MODE_1080P50			= 10,
+	PS3AV_MODE_WXGA				= 11,
+	PS3AV_MODE_SXGA				= 12,
+	PS3AV_MODE_WUXGA			= 13,
+};
+
+#define PS3AV_MODE_MASK				0x000F
+#define PS3AV_MODE_HDCP_OFF			0x1000	/* Retail PS3 product doesn't support this */
+#define PS3AV_MODE_DITHER			0x0800
+#define PS3AV_MODE_COLOR			0x0400
+#define PS3AV_MODE_WHITE			0x0200
+#define PS3AV_MODE_FULL				0x0080
+#define PS3AV_MODE_DVI				0x0040
+#define PS3AV_MODE_RGB				0x0020
+
+
+#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_60	PS3AV_MODE_480P
+#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_60	PS3AV_MODE_480I
+#define PS3AV_DEFAULT_HDMI_MODE_ID_REG_50	PS3AV_MODE_576P
+#define PS3AV_DEFAULT_AVMULTI_MODE_ID_REG_50	PS3AV_MODE_576I
+
+#define PS3AV_REGION_60				0x01
+#define PS3AV_REGION_50				0x02
+#define PS3AV_REGION_RGB			0x10
+
+#define get_status(buf)				(((__u32 *)buf)[2])
+#define PS3AV_HDR_SIZE				4	/* version + size */
+
+
+/** command packet structure **/
+struct ps3av_send_hdr {
+	u16 version;
+	u16 size;		/* size of command packet */
+	u32 cid;		/* command id */
+};
+
+struct ps3av_reply_hdr {
+	u16 version;
+	u16 size;
+	u32 cid;
+	u32 status;
+};
+
+/* backend: initialization */
+struct ps3av_pkt_av_init {
+	struct ps3av_send_hdr send_hdr;
+	u32 event_bit;
+};
+
+/* backend: finalize */
+struct ps3av_pkt_av_fin {
+	struct ps3av_send_hdr send_hdr;
+	/* recv */
+	u32 reserved;
+};
+
+/* backend: get port */
+struct ps3av_pkt_av_get_hw_conf {
+	struct ps3av_send_hdr send_hdr;
+	/* recv */
+	u32 status;
+	u16 num_of_hdmi;	/* out: number of hdmi */
+	u16 num_of_avmulti;	/* out: number of avmulti */
+	u16 num_of_spdif;	/* out: number of hdmi */
+	u16 reserved;
+};
+
+/* backend: get monitor info */
+struct ps3av_info_resolution {
+	u32 res_bits;
+	u32 native;
+};
+
+struct ps3av_info_cs {
+	u8 rgb;
+	u8 yuv444;
+	u8 yuv422;
+	u8 reserved;
+};
+
+struct ps3av_info_color {
+	u16 red_x;
+	u16 red_y;
+	u16 green_x;
+	u16 green_y;
+	u16 blue_x;
+	u16 blue_y;
+	u16 white_x;
+	u16 white_y;
+	u32 gamma;
+};
+
+struct ps3av_info_audio {
+	u8 type;
+	u8 max_num_of_ch;
+	u8 fs;
+	u8 sbit;
+};
+
+struct ps3av_info_monitor {
+	u8 avport;
+	u8 monitor_id[10];
+	u8 monitor_type;
+	u8 monitor_name[16];
+	struct ps3av_info_resolution res_60;
+	struct ps3av_info_resolution res_50;
+	struct ps3av_info_resolution res_other;
+	struct ps3av_info_resolution res_vesa;
+	struct ps3av_info_cs cs;
+	struct ps3av_info_color color;
+	u8 supported_ai;
+	u8 speaker_info;
+	u8 num_of_audio_block;
+	struct ps3av_info_audio audio[0];	/* 0 or more audio blocks */
+	u8 reserved[169];
+} __attribute__ ((packed));
+
+struct ps3av_pkt_av_get_monitor_info {
+	struct ps3av_send_hdr send_hdr;
+	u16 avport;		/* in: avport */
+	u16 reserved;
+	/* recv */
+	struct ps3av_info_monitor info;	/* out: monitor info */
+};
+
+/* backend: enable/disable event */
+struct ps3av_pkt_av_event {
+	struct ps3av_send_hdr send_hdr;
+	u32 event_bit;		/* in */
+};
+
+/* backend: video cs param */
+struct ps3av_pkt_av_video_cs {
+	struct ps3av_send_hdr send_hdr;
+	u16 avport;		/* in: avport */
+	u16 av_vid;		/* in: video resolution */
+	u16 av_cs_out;		/* in: output color space */
+	u16 av_cs_in;		/* in: input color space */
+	u8 dither;		/* in: dither bit length */
+	u8 bitlen_out;		/* in: bit length */
+	u8 super_white;		/* in: super white */
+	u8 aspect;		/* in: aspect ratio */
+};
+
+/* backend: video mute */
+struct ps3av_av_mute {
+	u16 avport;		/* in: avport */
+	u16 mute;		/* in: mute on/off */
+};
+
+struct ps3av_pkt_av_video_mute {
+	struct ps3av_send_hdr send_hdr;
+	struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX];
+};
+
+/* backend: video disable signal */
+struct ps3av_pkt_av_video_disable_sig {
+	struct ps3av_send_hdr send_hdr;
+	u16 avport;		/* in: avport */
+	u16 reserved;
+};
+
+/* backend: audio param */
+struct ps3av_audio_info_frame {
+	struct pb1_bit {
+		u8 ct:4;
+		u8 rsv:1;
+		u8 cc:3;
+	} pb1;
+	struct pb2_bit {
+		u8 rsv:3;
+		u8 sf:3;
+		u8 ss:2;
+	} pb2;
+	u8 pb3;
+	u8 pb4;
+	struct pb5_bit {
+		u8 dm:1;
+		u8 lsv:4;
+		u8 rsv:3;
+	} pb5;
+};
+
+struct ps3av_pkt_av_audio_param {
+	struct ps3av_send_hdr send_hdr;
+	u16 avport;		/* in: avport */
+	u16 reserved;
+	u8 mclk;		/* in: audio mclk */
+	u8 ns[3];		/* in: audio ns val */
+	u8 enable;		/* in: audio enable */
+	u8 swaplr;		/* in: audio swap */
+	u8 fifomap;		/* in: audio fifomap */
+	u8 inputctrl;		/* in: audio input ctrl */
+	u8 inputlen;		/* in: sample bit size */
+	u8 layout;		/* in: speaker layout param */
+	struct ps3av_audio_info_frame info;	/* in: info */
+	u8 chstat[5];		/* in: ch stat */
+};
+
+/* backend: audio_mute */
+struct ps3av_pkt_av_audio_mute {
+	struct ps3av_send_hdr send_hdr;
+	struct ps3av_av_mute mute[PS3AV_MUTE_PORT_MAX];
+};
+
+/* backend: hdmi_mode */
+struct ps3av_pkt_av_hdmi_mode {
+	struct ps3av_send_hdr send_hdr;
+	u8 mode;		/* in: hdmi_mode */
+	u8 reserved0;
+	u8 reserved1;
+	u8 reserved2;
+};
+
+/* backend: tv_mute */
+struct ps3av_pkt_av_tv_mute {
+	struct ps3av_send_hdr send_hdr;
+	u16 avport;		/* in: avport HDMI only */
+	u16 mute;		/* in: mute */
+};
+
+/* video: initialize */
+struct ps3av_pkt_video_init {
+	struct ps3av_send_hdr send_hdr;
+	/* recv */
+	u32 reserved;
+};
+
+/* video: mode setting */
+struct ps3av_pkt_video_mode {
+	struct ps3av_send_hdr send_hdr;
+	u32 video_head;		/* in: head */
+	u32 reserved;
+	u32 video_vid;		/* in: video resolution */
+	u16 reserved1;
+	u16 width;		/* in: width in pixel */
+	u16 reserved2;
+	u16 height;		/* in: height in pixel */
+	u32 pitch;		/* in: line size in byte */
+	u32 video_out_format;	/* in: out format */
+	u32 video_format;	/* in: input frame buffer format */
+	u8 reserved3;
+	u8 video_cl_cnv;	/* in: color conversion */
+	u16 video_order;	/* in: input RGB order */
+	u32 reserved4;
+};
+
+/* video: format */
+struct ps3av_pkt_video_format {
+	struct ps3av_send_hdr send_hdr;
+	u32 video_head;		/* in: head */
+	u32 video_format;	/* in: frame buffer format */
+	u8 reserved;
+	u8 video_cl_cnv;	/* in: color conversion */
+	u16 video_order;	/* in: input RGB order */
+};
+
+/* video: pitch */
+struct ps3av_pkt_video_pitch {
+	u16 version;
+	u16 size;		/* size of command packet */
+	u32 cid;		/* command id */
+	u32 video_head;		/* in: head */
+	u32 pitch;		/* in: line size in byte */
+};
+
+/* audio: initialize */
+struct ps3av_pkt_audio_init {
+	struct ps3av_send_hdr send_hdr;
+	/* recv */
+	u32 reserved;
+};
+
+/* audio: mode setting */
+struct ps3av_pkt_audio_mode {
+	struct ps3av_send_hdr send_hdr;
+	u8 avport;		/* in: avport */
+	u8 reserved0[3];
+	u32 mask;		/* in: mask */
+	u32 audio_num_of_ch;	/* in: number of ch */
+	u32 audio_fs;		/* in: sampling freq */
+	u32 audio_word_bits;	/* in: sample bit size */
+	u32 audio_format;	/* in: audio output format */
+	u32 audio_source;	/* in: audio source */
+	u8 audio_enable[4];	/* in: audio enable */
+	u8 audio_swap[4];	/* in: audio swap */
+	u8 audio_map[4];	/* in: audio map */
+	u32 audio_layout;	/* in: speaker layout */
+	u32 audio_downmix;	/* in: audio downmix permission */
+	u32 audio_downmix_level;
+	u8 audio_cs_info[8];	/* in: IEC channel status */
+};
+
+/* audio: mute */
+struct ps3av_audio_mute {
+	u8 avport;		/* in: opt_port optical */
+	u8 reserved[3];
+	u32 mute;		/* in: mute */
+};
+
+struct ps3av_pkt_audio_mute {
+	struct ps3av_send_hdr send_hdr;
+	struct ps3av_audio_mute mute[PS3AV_OPT_PORT_MAX];
+};
+
+/* audio: active/inactive */
+struct ps3av_pkt_audio_active {
+	struct ps3av_send_hdr send_hdr;
+	u32 audio_port;		/* in: audio active/inactive port */
+};
+
+/* audio: SPDIF user bit */
+struct ps3av_pkt_audio_spdif_bit {
+	u16 version;
+	u16 size;		/* size of command packet */
+	u32 cid;		/* command id */
+	u8 avport;		/* in: avport SPDIF only */
+	u8 reserved[3];
+	u32 audio_port;		/* in: SPDIF only */
+	u32 spdif_bit_data[12];	/* in: user bit data */
+};
+
+/* audio: audio control */
+struct ps3av_pkt_audio_ctrl {
+	u16 version;
+	u16 size;		/* size of command packet */
+	u32 cid;		/* command id */
+	u32 audio_ctrl_id;	/* in: control id */
+	u32 audio_ctrl_data[4];	/* in: control data */
+};
+
+/* avb:param */
+#define PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE	\
+	(PS3AV_AVB_NUM_VIDEO*sizeof(struct ps3av_pkt_video_mode) + \
+	 PS3AV_AVB_NUM_AUDIO*sizeof(struct ps3av_pkt_audio_mode) + \
+	 PS3AV_AVB_NUM_AV_VIDEO*sizeof(struct ps3av_pkt_av_video_cs) + \
+	 PS3AV_AVB_NUM_AV_AUDIO*sizeof(struct ps3av_pkt_av_audio_param))
+
+struct ps3av_pkt_avb_param {
+	struct ps3av_send_hdr send_hdr;
+	u16 num_of_video_pkt;
+	u16 num_of_audio_pkt;
+	u16 num_of_av_video_pkt;
+	u16 num_of_av_audio_pkt;
+	/*
+	 * The actual buffer layout depends on the fields above:
+	 *
+	 * struct ps3av_pkt_video_mode video[num_of_video_pkt];
+	 * struct ps3av_pkt_audio_mode audio[num_of_audio_pkt];
+	 * struct ps3av_pkt_av_video_cs av_video[num_of_av_video_pkt];
+	 * struct ps3av_pkt_av_audio_param av_audio[num_of_av_audio_pkt];
+	 */
+	u8 buf[PS3AV_PKT_AVB_PARAM_MAX_BUF_SIZE];
+};
+
+
+/** command status **/
+#define PS3AV_STATUS_SUCCESS			0x0000	/* success */
+#define PS3AV_STATUS_RECEIVE_VUART_ERROR	0x0001	/* receive vuart error */
+#define PS3AV_STATUS_SYSCON_COMMUNICATE_FAIL	0x0002	/* syscon communication error */
+#define PS3AV_STATUS_INVALID_COMMAND		0x0003	/* obsolete invalid CID */
+#define PS3AV_STATUS_INVALID_PORT		0x0004	/* invalid port number */
+#define PS3AV_STATUS_INVALID_VID		0x0005	/* invalid video format */
+#define PS3AV_STATUS_INVALID_COLOR_SPACE	0x0006	/* invalid video colose space */
+#define PS3AV_STATUS_INVALID_FS			0x0007	/* invalid audio sampling freq */
+#define PS3AV_STATUS_INVALID_AUDIO_CH		0x0008	/* invalid audio channel number */
+#define PS3AV_STATUS_UNSUPPORTED_VERSION	0x0009	/* version mismatch  */
+#define PS3AV_STATUS_INVALID_SAMPLE_SIZE	0x000a	/* invalid audio sample bit size */
+#define PS3AV_STATUS_FAILURE			0x000b	/* other failures */
+#define PS3AV_STATUS_UNSUPPORTED_COMMAND	0x000c	/* unsupported cid */
+#define PS3AV_STATUS_BUFFER_OVERFLOW		0x000d	/* write buffer overflow */
+#define PS3AV_STATUS_INVALID_VIDEO_PARAM	0x000e	/* invalid video param */
+#define PS3AV_STATUS_NO_SEL			0x000f	/* not exist selector */
+#define PS3AV_STATUS_INVALID_AV_PARAM		0x0010	/* invalid backend param */
+#define PS3AV_STATUS_INVALID_AUDIO_PARAM	0x0011	/* invalid audio param */
+#define PS3AV_STATUS_UNSUPPORTED_HDMI_MODE	0x0012	/* unsupported hdmi mode */
+#define PS3AV_STATUS_NO_SYNC_HEAD		0x0013	/* sync head failed */
+
+extern void ps3av_set_hdr(u32, u16, struct ps3av_send_hdr *);
+extern int ps3av_do_pkt(u32, u16, size_t, struct ps3av_send_hdr *);
+
+extern int ps3av_cmd_init(void);
+extern int ps3av_cmd_fin(void);
+extern int ps3av_cmd_av_video_mute(int, u32 *, u32);
+extern int ps3av_cmd_av_video_disable_sig(u32);
+extern int ps3av_cmd_av_tv_mute(u32, u32);
+extern int ps3av_cmd_enable_event(void);
+extern int ps3av_cmd_av_hdmi_mode(u8);
+extern u32 ps3av_cmd_set_av_video_cs(void *, u32, int, int, int, u32);
+extern u32 ps3av_cmd_set_video_mode(void *, u32, int, int, u32);
+extern int ps3av_cmd_video_format_black(u32, u32, u32);
+extern int ps3av_cmd_av_audio_mute(int, u32 *, u32);
+extern u32 ps3av_cmd_set_av_audio_param(void *, u32,
+					const struct ps3av_pkt_audio_mode *,
+					u32);
+extern void ps3av_cmd_set_audio_mode(struct ps3av_pkt_audio_mode *, u32, u32,
+				     u32, u32, u32, u32);
+extern int ps3av_cmd_audio_mode(struct ps3av_pkt_audio_mode *);
+extern int ps3av_cmd_audio_mute(int, u32 *, u32);
+extern int ps3av_cmd_audio_active(int, u32);
+extern int ps3av_cmd_avb_param(struct ps3av_pkt_avb_param *, u32);
+extern int ps3av_cmd_av_get_hw_conf(struct ps3av_pkt_av_get_hw_conf *);
+extern int ps3av_cmd_video_get_monitor_info(struct ps3av_pkt_av_get_monitor_info *,
+					    u32);
+
+extern int ps3av_set_video_mode(u32);
+extern int ps3av_set_audio_mode(u32, u32, u32, u32, u32);
+extern int ps3av_get_auto_mode(void);
+extern int ps3av_get_mode(void);
+extern int ps3av_video_mode2res(u32, u32 *, u32 *);
+extern int ps3av_video_mute(int);
+extern int ps3av_audio_mute(int);
+extern int ps3av_dev_open(void);
+extern int ps3av_dev_close(void);
+extern void ps3av_register_flip_ctl(void (*flip_ctl)(int on, void *data),
+				    void *flip_data);
+extern void ps3av_flip_ctl(int on);
+
+#endif	/* _ASM_POWERPC_PS3AV_H_ */
diff --git a/arch/powerpc/include/asm/ps3fb.h b/arch/powerpc/include/asm/ps3fb.h
new file mode 100644
index 000000000000..3f121fe4010d
--- /dev/null
+++ b/arch/powerpc/include/asm/ps3fb.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2006 Sony Computer Entertainment Inc.
+ * Copyright 2006, 2007 Sony Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef _ASM_POWERPC_PS3FB_H_
+#define _ASM_POWERPC_PS3FB_H_
+
+#include <linux/ioctl.h>
+
+/* ioctl */
+#define PS3FB_IOCTL_SETMODE       _IOW('r',  1, int) /* set video mode */
+#define PS3FB_IOCTL_GETMODE       _IOR('r',  2, int) /* get video mode */
+#define PS3FB_IOCTL_SCREENINFO    _IOR('r',  3, int) /* get screen info */
+#define PS3FB_IOCTL_ON            _IO('r', 4)        /* use IOCTL_FSEL */
+#define PS3FB_IOCTL_OFF           _IO('r', 5)        /* return to normal-flip */
+#define PS3FB_IOCTL_FSEL          _IOW('r', 6, int)  /* blit and flip request */
+
+#ifndef FBIO_WAITFORVSYNC
+#define FBIO_WAITFORVSYNC         _IOW('F', 0x20, __u32) /* wait for vsync */
+#endif
+
+struct ps3fb_ioctl_res {
+	__u32 xres; /* frame buffer x_size */
+	__u32 yres; /* frame buffer y_size */
+	__u32 xoff; /* margine x  */
+	__u32 yoff; /* margine y */
+	__u32 num_frames; /* num of frame buffers */
+};
+
+#endif /* _ASM_POWERPC_PS3FB_H_ */
diff --git a/arch/powerpc/include/asm/ps3stor.h b/arch/powerpc/include/asm/ps3stor.h
new file mode 100644
index 000000000000..6fcaf714fa50
--- /dev/null
+++ b/arch/powerpc/include/asm/ps3stor.h
@@ -0,0 +1,71 @@
+/*
+ * PS3 Storage Devices
+ *
+ * Copyright (C) 2007 Sony Computer Entertainment Inc.
+ * Copyright 2007 Sony Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef _ASM_POWERPC_PS3STOR_H_
+#define _ASM_POWERPC_PS3STOR_H_
+
+#include <linux/interrupt.h>
+
+#include <asm/ps3.h>
+
+
+struct ps3_storage_region {
+	unsigned int id;
+	u64 start;
+	u64 size;
+};
+
+struct ps3_storage_device {
+	struct ps3_system_bus_device sbd;
+
+	struct ps3_dma_region dma_region;
+	unsigned int irq;
+	u64 blk_size;
+
+	u64 tag;
+	u64 lv1_status;
+	struct completion done;
+
+	unsigned long bounce_size;
+	void *bounce_buf;
+	u64 bounce_lpar;
+	dma_addr_t bounce_dma;
+
+	unsigned int num_regions;
+	unsigned long accessible_regions;
+	unsigned int region_idx;		/* first accessible region */
+	struct ps3_storage_region regions[0];	/* Must be last */
+};
+
+static inline struct ps3_storage_device *to_ps3_storage_device(struct device *dev)
+{
+	return container_of(dev, struct ps3_storage_device, sbd.core);
+}
+
+extern int ps3stor_setup(struct ps3_storage_device *dev,
+			 irq_handler_t handler);
+extern void ps3stor_teardown(struct ps3_storage_device *dev);
+extern u64 ps3stor_read_write_sectors(struct ps3_storage_device *dev, u64 lpar,
+				      u64 start_sector, u64 sectors,
+				      int write);
+extern u64 ps3stor_send_command(struct ps3_storage_device *dev, u64 cmd,
+				u64 arg1, u64 arg2, u64 arg3, u64 arg4);
+
+#endif /* _ASM_POWERPC_PS3STOR_H_ */
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
new file mode 100644
index 000000000000..734e0754fb9b
--- /dev/null
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -0,0 +1,293 @@
+#ifndef _ASM_POWERPC_PTRACE_H
+#define _ASM_POWERPC_PTRACE_H
+
+/*
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ *
+ * this should only contain volatile regs
+ * since we can keep non-volatile in the thread_struct
+ * should set this up when only volatiles are saved
+ * by intr code.
+ *
+ * Since this is going on the stack, *CARE MUST BE TAKEN* to insure
+ * that the overall structure is a multiple of 16 bytes in length.
+ *
+ * Note that the offsets of the fields in this struct correspond with
+ * the PT_* values below.  This simplifies arch/powerpc/kernel/ptrace.c.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __ASSEMBLY__
+
+struct pt_regs {
+	unsigned long gpr[32];
+	unsigned long nip;
+	unsigned long msr;
+	unsigned long orig_gpr3;	/* Used for restarting system calls */
+	unsigned long ctr;
+	unsigned long link;
+	unsigned long xer;
+	unsigned long ccr;
+#ifdef __powerpc64__
+	unsigned long softe;		/* Soft enabled/disabled */
+#else
+	unsigned long mq;		/* 601 only (not used at present) */
+					/* Used on APUS to hold IPL value. */
+#endif
+	unsigned long trap;		/* Reason for being here */
+	/* N.B. for critical exceptions on 4xx, the dar and dsisr
+	   fields are overloaded to hold srr0 and srr1. */
+	unsigned long dar;		/* Fault registers */
+	unsigned long dsisr;		/* on 4xx/Book-E used for ESR */
+	unsigned long result;		/* Result of a system call */
+};
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#ifdef __powerpc64__
+
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
+#define STACK_FRAME_OVERHEAD	112	/* size of minimum stack frame */
+#define STACK_FRAME_LR_SAVE	2	/* Location of LR in stack frame */
+#define STACK_FRAME_REGS_MARKER	ASM_CONST(0x7265677368657265)
+#define STACK_INT_FRAME_SIZE	(sizeof(struct pt_regs) + \
+					STACK_FRAME_OVERHEAD + 288)
+#define STACK_FRAME_MARKER	12
+
+/* Size of dummy stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE	128
+#define __SIGNAL_FRAMESIZE32	64
+
+#else /* __powerpc64__ */
+
+#define STACK_FRAME_OVERHEAD	16	/* size of minimum stack frame */
+#define STACK_FRAME_LR_SAVE	1	/* Location of LR in stack frame */
+#define STACK_FRAME_REGS_MARKER	ASM_CONST(0x72656773)
+#define STACK_INT_FRAME_SIZE	(sizeof(struct pt_regs) + STACK_FRAME_OVERHEAD)
+#define STACK_FRAME_MARKER	2
+
+/* Size of stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE	64
+
+#endif /* __powerpc64__ */
+
+#ifndef __ASSEMBLY__
+
+#define instruction_pointer(regs) ((regs)->nip)
+#define user_stack_pointer(regs) ((regs)->gpr[1])
+#define regs_return_value(regs) ((regs)->gpr[3])
+
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *regs);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+
+#ifdef __powerpc64__
+#define user_mode(regs) ((((regs)->msr) >> MSR_PR_LG) & 0x1)
+#else
+#define user_mode(regs) (((regs)->msr & MSR_PR) != 0)
+#endif
+
+#define force_successful_syscall_return()   \
+	do { \
+		set_thread_flag(TIF_NOERROR); \
+	} while(0)
+
+struct task_struct;
+extern unsigned long ptrace_get_reg(struct task_struct *task, int regno);
+extern int ptrace_put_reg(struct task_struct *task, int regno,
+			  unsigned long data);
+
+/*
+ * We use the least-significant bit of the trap field to indicate
+ * whether we have saved the full set of registers, or only a
+ * partial set.  A 1 there means the partial set.
+ * On 4xx we use the next bit to indicate whether the exception
+ * is a critical exception (1 means it is).
+ */
+#define FULL_REGS(regs)		(((regs)->trap & 1) == 0)
+#ifndef __powerpc64__
+#define IS_CRITICAL_EXC(regs)	(((regs)->trap & 2) != 0)
+#define IS_MCHECK_EXC(regs)	(((regs)->trap & 4) != 0)
+#define IS_DEBUG_EXC(regs)	(((regs)->trap & 8) != 0)
+#endif /* ! __powerpc64__ */
+#define TRAP(regs)		((regs)->trap & ~0xF)
+#ifdef __powerpc64__
+#define CHECK_FULL_REGS(regs)	BUG_ON(regs->trap & 1)
+#else
+#define CHECK_FULL_REGS(regs)						      \
+do {									      \
+	if ((regs)->trap & 1)						      \
+		printk(KERN_CRIT "%s: partial register set\n", __FUNCTION__); \
+} while (0)
+#endif /* __powerpc64__ */
+
+/*
+ * These are defined as per linux/ptrace.h, which see.
+ */
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+/*
+ * Offsets used by 'ptrace' system call interface.
+ * These can't be changed without breaking binary compatibility
+ * with MkLinux, etc.
+ */
+#define PT_R0	0
+#define PT_R1	1
+#define PT_R2	2
+#define PT_R3	3
+#define PT_R4	4
+#define PT_R5	5
+#define PT_R6	6
+#define PT_R7	7
+#define PT_R8	8
+#define PT_R9	9
+#define PT_R10	10
+#define PT_R11	11
+#define PT_R12	12
+#define PT_R13	13
+#define PT_R14	14
+#define PT_R15	15
+#define PT_R16	16
+#define PT_R17	17
+#define PT_R18	18
+#define PT_R19	19
+#define PT_R20	20
+#define PT_R21	21
+#define PT_R22	22
+#define PT_R23	23
+#define PT_R24	24
+#define PT_R25	25
+#define PT_R26	26
+#define PT_R27	27
+#define PT_R28	28
+#define PT_R29	29
+#define PT_R30	30
+#define PT_R31	31
+
+#define PT_NIP	32
+#define PT_MSR	33
+#define PT_ORIG_R3 34
+#define PT_CTR	35
+#define PT_LNK	36
+#define PT_XER	37
+#define PT_CCR	38
+#ifndef __powerpc64__
+#define PT_MQ	39
+#else
+#define PT_SOFTE 39
+#endif
+#define PT_TRAP	40
+#define PT_DAR	41
+#define PT_DSISR 42
+#define PT_RESULT 43
+#define PT_REGS_COUNT 44
+
+#define PT_FPR0	48	/* each FP reg occupies 2 slots in this space */
+
+#ifndef __powerpc64__
+
+#define PT_FPR31 (PT_FPR0 + 2*31)
+#define PT_FPSCR (PT_FPR0 + 2*32 + 1)
+
+#else /* __powerpc64__ */
+
+#define PT_FPSCR (PT_FPR0 + 32)	/* each FP reg occupies 1 slot in 64-bit space */
+
+#ifdef __KERNEL__
+#define PT_FPSCR32 (PT_FPR0 + 2*32 + 1)	/* each FP reg occupies 2 32-bit userspace slots */
+#endif
+
+#define PT_VR0 82	/* each Vector reg occupies 2 slots in 64-bit */
+#define PT_VSCR (PT_VR0 + 32*2 + 1)
+#define PT_VRSAVE (PT_VR0 + 33*2)
+
+#ifdef __KERNEL__
+#define PT_VR0_32 164	/* each Vector reg occupies 4 slots in 32-bit */
+#define PT_VSCR_32 (PT_VR0 + 32*4 + 3)
+#define PT_VRSAVE_32 (PT_VR0 + 33*4)
+#endif
+
+/*
+ * Only store first 32 VSRs here. The second 32 VSRs in VR0-31
+ */
+#define PT_VSR0 150	/* each VSR reg occupies 2 slots in 64-bit */
+#define PT_VSR31 (PT_VSR0 + 2*31)
+#ifdef __KERNEL__
+#define PT_VSR0_32 300 	/* each VSR reg occupies 4 slots in 32-bit */
+#endif
+#endif /* __powerpc64__ */
+
+/*
+ * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
+ * The transfer totals 34 quadword.  Quadwords 0-31 contain the
+ * corresponding vector registers.  Quadword 32 contains the vscr as the
+ * last word (offset 12) within that quadword.  Quadword 33 contains the
+ * vrsave as the first word (offset 0) within the quadword.
+ *
+ * This definition of the VMX state is compatible with the current PPC32
+ * ptrace interface.  This allows signal handling and ptrace to use the same
+ * structures.  This also simplifies the implementation of a bi-arch
+ * (combined (32- and 64-bit) gdb.
+ */
+#define PTRACE_GETVRREGS	18
+#define PTRACE_SETVRREGS	19
+
+/* Get/set all the upper 32-bits of the SPE registers, accumulator, and
+ * spefscr, in one go */
+#define PTRACE_GETEVRREGS	20
+#define PTRACE_SETEVRREGS	21
+
+/* Get the first 32 128bit VSX registers */
+#define PTRACE_GETVSRREGS	27
+#define PTRACE_SETVSRREGS	28
+
+/*
+ * Get or set a debug register. The first 16 are DABR registers and the
+ * second 16 are IABR registers.
+ */
+#define PTRACE_GET_DEBUGREG	25
+#define PTRACE_SET_DEBUGREG	26
+
+/* (new) PTRACE requests using the same numbers as x86 and the same
+ * argument ordering. Additionally, they support more registers too
+ */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_GETREGS64	  22
+#define PTRACE_SETREGS64	  23
+
+/* (old) PTRACE requests with inverted arguments */
+#define PPC_PTRACE_GETREGS	0x99	/* Get GPRs 0 - 31 */
+#define PPC_PTRACE_SETREGS	0x98	/* Set GPRs 0 - 31 */
+#define PPC_PTRACE_GETFPREGS	0x97	/* Get FPRs 0 - 31 */
+#define PPC_PTRACE_SETFPREGS	0x96	/* Set FPRs 0 - 31 */
+
+/* Calls to trace a 64bit program from a 32bit program */
+#define PPC_PTRACE_PEEKTEXT_3264 0x95
+#define PPC_PTRACE_PEEKDATA_3264 0x94
+#define PPC_PTRACE_POKETEXT_3264 0x93
+#define PPC_PTRACE_POKEDATA_3264 0x92
+#define PPC_PTRACE_PEEKUSR_3264  0x91
+#define PPC_PTRACE_POKEUSR_3264  0x90
+
+#endif /* _ASM_POWERPC_PTRACE_H */
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
new file mode 100644
index 000000000000..edee15d269ea
--- /dev/null
+++ b/arch/powerpc/include/asm/qe.h
@@ -0,0 +1,642 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QUICC Engine (QE) external definitions and structure.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_H
+#define _ASM_POWERPC_QE_H
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+#include <asm/cpm.h>
+#include <asm/immap_qe.h>
+
+#define QE_NUM_OF_SNUM	28
+#define QE_NUM_OF_BRGS	16
+#define QE_NUM_OF_PORTS	1024
+
+/* Memory partitions
+*/
+#define MEM_PART_SYSTEM		0
+#define MEM_PART_SECONDARY	1
+#define MEM_PART_MURAM		2
+
+/* Clocks and BRGs */
+enum qe_clock {
+	QE_CLK_NONE = 0,
+	QE_BRG1,		/* Baud Rate Generator 1 */
+	QE_BRG2,		/* Baud Rate Generator 2 */
+	QE_BRG3,		/* Baud Rate Generator 3 */
+	QE_BRG4,		/* Baud Rate Generator 4 */
+	QE_BRG5,		/* Baud Rate Generator 5 */
+	QE_BRG6,		/* Baud Rate Generator 6 */
+	QE_BRG7,		/* Baud Rate Generator 7 */
+	QE_BRG8,		/* Baud Rate Generator 8 */
+	QE_BRG9,		/* Baud Rate Generator 9 */
+	QE_BRG10,		/* Baud Rate Generator 10 */
+	QE_BRG11,		/* Baud Rate Generator 11 */
+	QE_BRG12,		/* Baud Rate Generator 12 */
+	QE_BRG13,		/* Baud Rate Generator 13 */
+	QE_BRG14,		/* Baud Rate Generator 14 */
+	QE_BRG15,		/* Baud Rate Generator 15 */
+	QE_BRG16,		/* Baud Rate Generator 16 */
+	QE_CLK1,		/* Clock 1 */
+	QE_CLK2,		/* Clock 2 */
+	QE_CLK3,		/* Clock 3 */
+	QE_CLK4,		/* Clock 4 */
+	QE_CLK5,		/* Clock 5 */
+	QE_CLK6,		/* Clock 6 */
+	QE_CLK7,		/* Clock 7 */
+	QE_CLK8,		/* Clock 8 */
+	QE_CLK9,		/* Clock 9 */
+	QE_CLK10,		/* Clock 10 */
+	QE_CLK11,		/* Clock 11 */
+	QE_CLK12,		/* Clock 12 */
+	QE_CLK13,		/* Clock 13 */
+	QE_CLK14,		/* Clock 14 */
+	QE_CLK15,		/* Clock 15 */
+	QE_CLK16,		/* Clock 16 */
+	QE_CLK17,		/* Clock 17 */
+	QE_CLK18,		/* Clock 18 */
+	QE_CLK19,		/* Clock 19 */
+	QE_CLK20,		/* Clock 20 */
+	QE_CLK21,		/* Clock 21 */
+	QE_CLK22,		/* Clock 22 */
+	QE_CLK23,		/* Clock 23 */
+	QE_CLK24,		/* Clock 24 */
+	QE_CLK_DUMMY
+};
+
+static inline bool qe_clock_is_brg(enum qe_clock clk)
+{
+	return clk >= QE_BRG1 && clk <= QE_BRG16;
+}
+
+extern spinlock_t cmxgcr_lock;
+
+/* Export QE common operations */
+extern void __init qe_reset(void);
+
+/* QE PIO */
+#define QE_PIO_PINS 32
+
+struct qe_pio_regs {
+	__be32	cpodr;		/* Open drain register */
+	__be32	cpdata;		/* Data register */
+	__be32	cpdir1;		/* Direction register */
+	__be32	cpdir2;		/* Direction register */
+	__be32	cppar1;		/* Pin assignment register */
+	__be32	cppar2;		/* Pin assignment register */
+#ifdef CONFIG_PPC_85xx
+	u8	pad[8];
+#endif
+};
+
+extern int par_io_init(struct device_node *np);
+extern int par_io_of_config(struct device_node *np);
+#define QE_PIO_DIR_IN	2
+#define QE_PIO_DIR_OUT	1
+extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin,
+				int dir, int open_drain, int assignment,
+				int has_irq);
+extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+			     int assignment, int has_irq);
+extern int par_io_data_set(u8 port, u8 pin, u8 val);
+
+/* QE internal API */
+int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
+enum qe_clock qe_clock_source(const char *source);
+unsigned int qe_get_brg_clk(void);
+int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
+int qe_get_snum(void);
+void qe_put_snum(u8 snum);
+/* we actually use cpm_muram implementation, define this for convenience */
+#define qe_muram_init cpm_muram_init
+#define qe_muram_alloc cpm_muram_alloc
+#define qe_muram_alloc_fixed cpm_muram_alloc_fixed
+#define qe_muram_free cpm_muram_free
+#define qe_muram_addr cpm_muram_addr
+#define qe_muram_offset cpm_muram_offset
+
+/* Structure that defines QE firmware binary files.
+ *
+ * See Documentation/powerpc/qe-firmware.txt for a description of these
+ * fields.
+ */
+struct qe_firmware {
+	struct qe_header {
+		__be32 length;  /* Length of the entire structure, in bytes */
+		u8 magic[3];    /* Set to { 'Q', 'E', 'F' } */
+		u8 version;     /* Version of this layout. First ver is '1' */
+	} header;
+	u8 id[62];      /* Null-terminated identifier string */
+	u8 split;	/* 0 = shared I-RAM, 1 = split I-RAM */
+	u8 count;       /* Number of microcode[] structures */
+	struct {
+		__be16 model;   	/* The SOC model  */
+		u8 major;       	/* The SOC revision major */
+		u8 minor;       	/* The SOC revision minor */
+	} __attribute__ ((packed)) soc;
+	u8 padding[4];			/* Reserved, for alignment */
+	__be64 extended_modes;		/* Extended modes */
+	__be32 vtraps[8];		/* Virtual trap addresses */
+	u8 reserved[4];			/* Reserved, for future expansion */
+	struct qe_microcode {
+		u8 id[32];      	/* Null-terminated identifier */
+		__be32 traps[16];       /* Trap addresses, 0 == ignore */
+		__be32 eccr;    	/* The value for the ECCR register */
+		__be32 iram_offset;     /* Offset into I-RAM for the code */
+		__be32 count;   	/* Number of 32-bit words of the code */
+		__be32 code_offset;     /* Offset of the actual microcode */
+		u8 major;       	/* The microcode version major */
+		u8 minor;       	/* The microcode version minor */
+		u8 revision;		/* The microcode version revision */
+		u8 padding;		/* Reserved, for alignment */
+		u8 reserved[4];		/* Reserved, for future expansion */
+	} __attribute__ ((packed)) microcode[1];
+	/* All microcode binaries should be located here */
+	/* CRC32 should be located here, after the microcode binaries */
+} __attribute__ ((packed));
+
+struct qe_firmware_info {
+	char id[64];		/* Firmware name */
+	u32 vtraps[8];		/* Virtual trap addresses */
+	u64 extended_modes;	/* Extended modes */
+};
+
+/* Upload a firmware to the QE */
+int qe_upload_firmware(const struct qe_firmware *firmware);
+
+/* Obtain information on the uploaded firmware */
+struct qe_firmware_info *qe_get_firmware_info(void);
+
+/* QE USB */
+int qe_usb_clock_set(enum qe_clock clk, int rate);
+
+/* Buffer descriptors */
+struct qe_bd {
+	__be16 status;
+	__be16 length;
+	__be32 buf;
+} __attribute__ ((packed));
+
+#define BD_STATUS_MASK	0xffff0000
+#define BD_LENGTH_MASK	0x0000ffff
+
+/* Alignment */
+#define QE_INTR_TABLE_ALIGN	16	/* ??? */
+#define QE_ALIGNMENT_OF_BD	8
+#define QE_ALIGNMENT_OF_PRAM	64
+
+/* RISC allocation */
+enum qe_risc_allocation {
+	QE_RISC_ALLOCATION_RISC1 = 1,	/* RISC 1 */
+	QE_RISC_ALLOCATION_RISC2 = 2,	/* RISC 2 */
+	QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3	/* Dynamically choose
+						   RISC 1 or RISC 2 */
+};
+
+/* QE extended filtering Table Lookup Key Size */
+enum qe_fltr_tbl_lookup_key_size {
+	QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+		= 0x3f,		/* LookupKey parsed by the Generate LookupKey
+				   CMD is truncated to 8 bytes */
+	QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+		= 0x5f,		/* LookupKey parsed by the Generate LookupKey
+				   CMD is truncated to 16 bytes */
+};
+
+/* QE FLTR extended filtering Largest External Table Lookup Key Size */
+enum qe_fltr_largest_external_tbl_lookup_key_size {
+	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE
+		= 0x0,/* not used */
+	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES
+		= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES,	/* 8 bytes */
+	QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES
+		= QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES,	/* 16 bytes */
+};
+
+/* structure representing QE parameter RAM */
+struct qe_timer_tables {
+	u16 tm_base;		/* QE timer table base adr */
+	u16 tm_ptr;		/* QE timer table pointer */
+	u16 r_tmr;		/* QE timer mode register */
+	u16 r_tmv;		/* QE timer valid register */
+	u32 tm_cmd;		/* QE timer cmd register */
+	u32 tm_cnt;		/* QE timer internal cnt */
+} __attribute__ ((packed));
+
+#define QE_FLTR_TAD_SIZE	8
+
+/* QE extended filtering Termination Action Descriptor (TAD) */
+struct qe_fltr_tad {
+	u8 serialized[QE_FLTR_TAD_SIZE];
+} __attribute__ ((packed));
+
+/* Communication Direction */
+enum comm_dir {
+	COMM_DIR_NONE = 0,
+	COMM_DIR_RX = 1,
+	COMM_DIR_TX = 2,
+	COMM_DIR_RX_AND_TX = 3
+};
+
+/* QE CMXUCR Registers.
+ * There are two UCCs represented in each of the four CMXUCR registers.
+ * These values are for the UCC in the LSBs
+ */
+#define QE_CMXUCR_MII_ENET_MNG		0x00007000
+#define QE_CMXUCR_MII_ENET_MNG_SHIFT	12
+#define QE_CMXUCR_GRANT			0x00008000
+#define QE_CMXUCR_TSA			0x00004000
+#define QE_CMXUCR_BKPT			0x00000100
+#define QE_CMXUCR_TX_CLK_SRC_MASK	0x0000000F
+
+/* QE CMXGCR Registers.
+*/
+#define QE_CMXGCR_MII_ENET_MNG		0x00007000
+#define QE_CMXGCR_MII_ENET_MNG_SHIFT	12
+#define QE_CMXGCR_USBCS			0x0000000f
+#define QE_CMXGCR_USBCS_CLK3		0x1
+#define QE_CMXGCR_USBCS_CLK5		0x2
+#define QE_CMXGCR_USBCS_CLK7		0x3
+#define QE_CMXGCR_USBCS_CLK9		0x4
+#define QE_CMXGCR_USBCS_CLK13		0x5
+#define QE_CMXGCR_USBCS_CLK17		0x6
+#define QE_CMXGCR_USBCS_CLK19		0x7
+#define QE_CMXGCR_USBCS_CLK21		0x8
+#define QE_CMXGCR_USBCS_BRG9		0x9
+#define QE_CMXGCR_USBCS_BRG10		0xa
+
+/* QE CECR Commands.
+*/
+#define QE_CR_FLG			0x00010000
+#define QE_RESET			0x80000000
+#define QE_INIT_TX_RX			0x00000000
+#define QE_INIT_RX			0x00000001
+#define QE_INIT_TX			0x00000002
+#define QE_ENTER_HUNT_MODE		0x00000003
+#define QE_STOP_TX			0x00000004
+#define QE_GRACEFUL_STOP_TX		0x00000005
+#define QE_RESTART_TX			0x00000006
+#define QE_CLOSE_RX_BD			0x00000007
+#define QE_SWITCH_COMMAND		0x00000007
+#define QE_SET_GROUP_ADDRESS		0x00000008
+#define QE_START_IDMA			0x00000009
+#define QE_MCC_STOP_RX			0x00000009
+#define QE_ATM_TRANSMIT			0x0000000a
+#define QE_HPAC_CLEAR_ALL		0x0000000b
+#define QE_GRACEFUL_STOP_RX		0x0000001a
+#define QE_RESTART_RX			0x0000001b
+#define QE_HPAC_SET_PRIORITY		0x0000010b
+#define QE_HPAC_STOP_TX			0x0000020b
+#define QE_HPAC_STOP_RX			0x0000030b
+#define QE_HPAC_GRACEFUL_STOP_TX	0x0000040b
+#define QE_HPAC_GRACEFUL_STOP_RX	0x0000050b
+#define QE_HPAC_START_TX		0x0000060b
+#define QE_HPAC_START_RX		0x0000070b
+#define QE_USB_STOP_TX			0x0000000a
+#define QE_USB_RESTART_TX		0x0000000c
+#define QE_QMC_STOP_TX			0x0000000c
+#define QE_QMC_STOP_RX			0x0000000d
+#define QE_SS7_SU_FIL_RESET		0x0000000e
+/* jonathbr added from here down for 83xx */
+#define QE_RESET_BCS			0x0000000a
+#define QE_MCC_INIT_TX_RX_16		0x00000003
+#define QE_MCC_STOP_TX			0x00000004
+#define QE_MCC_INIT_TX_1		0x00000005
+#define QE_MCC_INIT_RX_1		0x00000006
+#define QE_MCC_RESET			0x00000007
+#define QE_SET_TIMER			0x00000008
+#define QE_RANDOM_NUMBER		0x0000000c
+#define QE_ATM_MULTI_THREAD_INIT	0x00000011
+#define QE_ASSIGN_PAGE			0x00000012
+#define QE_ADD_REMOVE_HASH_ENTRY	0x00000013
+#define QE_START_FLOW_CONTROL		0x00000014
+#define QE_STOP_FLOW_CONTROL		0x00000015
+#define QE_ASSIGN_PAGE_TO_DEVICE	0x00000016
+
+#define QE_ASSIGN_RISC			0x00000010
+#define QE_CR_MCN_NORMAL_SHIFT		6
+#define QE_CR_MCN_USB_SHIFT		4
+#define QE_CR_MCN_RISC_ASSIGN_SHIFT	8
+#define QE_CR_SNUM_SHIFT		17
+
+/* QE CECR Sub Block - sub block of QE command.
+*/
+#define QE_CR_SUBBLOCK_INVALID		0x00000000
+#define QE_CR_SUBBLOCK_USB		0x03200000
+#define QE_CR_SUBBLOCK_UCCFAST1		0x02000000
+#define QE_CR_SUBBLOCK_UCCFAST2		0x02200000
+#define QE_CR_SUBBLOCK_UCCFAST3		0x02400000
+#define QE_CR_SUBBLOCK_UCCFAST4		0x02600000
+#define QE_CR_SUBBLOCK_UCCFAST5		0x02800000
+#define QE_CR_SUBBLOCK_UCCFAST6		0x02a00000
+#define QE_CR_SUBBLOCK_UCCFAST7		0x02c00000
+#define QE_CR_SUBBLOCK_UCCFAST8		0x02e00000
+#define QE_CR_SUBBLOCK_UCCSLOW1		0x00000000
+#define QE_CR_SUBBLOCK_UCCSLOW2		0x00200000
+#define QE_CR_SUBBLOCK_UCCSLOW3		0x00400000
+#define QE_CR_SUBBLOCK_UCCSLOW4		0x00600000
+#define QE_CR_SUBBLOCK_UCCSLOW5		0x00800000
+#define QE_CR_SUBBLOCK_UCCSLOW6		0x00a00000
+#define QE_CR_SUBBLOCK_UCCSLOW7		0x00c00000
+#define QE_CR_SUBBLOCK_UCCSLOW8		0x00e00000
+#define QE_CR_SUBBLOCK_MCC1		0x03800000
+#define QE_CR_SUBBLOCK_MCC2		0x03a00000
+#define QE_CR_SUBBLOCK_MCC3		0x03000000
+#define QE_CR_SUBBLOCK_IDMA1		0x02800000
+#define QE_CR_SUBBLOCK_IDMA2		0x02a00000
+#define QE_CR_SUBBLOCK_IDMA3		0x02c00000
+#define QE_CR_SUBBLOCK_IDMA4		0x02e00000
+#define QE_CR_SUBBLOCK_HPAC		0x01e00000
+#define QE_CR_SUBBLOCK_SPI1		0x01400000
+#define QE_CR_SUBBLOCK_SPI2		0x01600000
+#define QE_CR_SUBBLOCK_RAND		0x01c00000
+#define QE_CR_SUBBLOCK_TIMER		0x01e00000
+#define QE_CR_SUBBLOCK_GENERAL		0x03c00000
+
+/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
+#define QE_CR_PROTOCOL_UNSPECIFIED	0x00	/* For all other protocols */
+#define QE_CR_PROTOCOL_HDLC_TRANSPARENT	0x00
+#define QE_CR_PROTOCOL_QMC		0x02
+#define QE_CR_PROTOCOL_UART		0x04
+#define QE_CR_PROTOCOL_ATM_POS		0x0A
+#define QE_CR_PROTOCOL_ETHERNET		0x0C
+#define QE_CR_PROTOCOL_L2_SWITCH	0x0D
+
+/* BRG configuration register */
+#define QE_BRGC_ENABLE		0x00010000
+#define QE_BRGC_DIVISOR_SHIFT	1
+#define QE_BRGC_DIVISOR_MAX	0xFFF
+#define QE_BRGC_DIV16		1
+
+/* QE Timers registers */
+#define QE_GTCFR1_PCAS	0x80
+#define QE_GTCFR1_STP2	0x20
+#define QE_GTCFR1_RST2	0x10
+#define QE_GTCFR1_GM2	0x08
+#define QE_GTCFR1_GM1	0x04
+#define QE_GTCFR1_STP1	0x02
+#define QE_GTCFR1_RST1	0x01
+
+/* SDMA registers */
+#define QE_SDSR_BER1	0x02000000
+#define QE_SDSR_BER2	0x01000000
+
+#define QE_SDMR_GLB_1_MSK	0x80000000
+#define QE_SDMR_ADR_SEL		0x20000000
+#define QE_SDMR_BER1_MSK	0x02000000
+#define QE_SDMR_BER2_MSK	0x01000000
+#define QE_SDMR_EB1_MSK		0x00800000
+#define QE_SDMR_ER1_MSK		0x00080000
+#define QE_SDMR_ER2_MSK		0x00040000
+#define QE_SDMR_CEN_MASK	0x0000E000
+#define QE_SDMR_SBER_1		0x00000200
+#define QE_SDMR_SBER_2		0x00000200
+#define QE_SDMR_EB1_PR_MASK	0x000000C0
+#define QE_SDMR_ER1_PR		0x00000008
+
+#define QE_SDMR_CEN_SHIFT	13
+#define QE_SDMR_EB1_PR_SHIFT	6
+
+#define QE_SDTM_MSNUM_SHIFT	24
+
+#define QE_SDEBCR_BA_MASK	0x01FFFFFF
+
+/* Communication Processor */
+#define QE_CP_CERCR_MEE		0x8000	/* Multi-user RAM ECC enable */
+#define QE_CP_CERCR_IEE		0x4000	/* Instruction RAM ECC enable */
+#define QE_CP_CERCR_CIR		0x0800	/* Common instruction RAM */
+
+/* I-RAM */
+#define QE_IRAM_IADD_AIE	0x80000000	/* Auto Increment Enable */
+#define QE_IRAM_IADD_BADDR	0x00080000	/* Base Address */
+
+/* UPC */
+#define UPGCR_PROTOCOL	0x80000000	/* protocol ul2 or pl2 */
+#define UPGCR_TMS	0x40000000	/* Transmit master/slave mode */
+#define UPGCR_RMS	0x20000000	/* Receive master/slave mode */
+#define UPGCR_ADDR	0x10000000	/* Master MPHY Addr multiplexing */
+#define UPGCR_DIAG	0x01000000	/* Diagnostic mode */
+
+/* UCC GUEMR register */
+#define UCC_GUEMR_MODE_MASK_RX	0x02
+#define UCC_GUEMR_MODE_FAST_RX	0x02
+#define UCC_GUEMR_MODE_SLOW_RX	0x00
+#define UCC_GUEMR_MODE_MASK_TX	0x01
+#define UCC_GUEMR_MODE_FAST_TX	0x01
+#define UCC_GUEMR_MODE_SLOW_TX	0x00
+#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX)
+#define UCC_GUEMR_SET_RESERVED3	0x10	/* Bit 3 in the guemr is reserved but
+					   must be set 1 */
+
+/* structure representing UCC SLOW parameter RAM */
+struct ucc_slow_pram {
+	__be16 rbase;		/* RX BD base address */
+	__be16 tbase;		/* TX BD base address */
+	u8 rbmr;		/* RX bus mode register (same as CPM's RFCR) */
+	u8 tbmr;		/* TX bus mode register (same as CPM's TFCR) */
+	__be16 mrblr;		/* Rx buffer length */
+	__be32 rstate;		/* Rx internal state */
+	__be32 rptr;		/* Rx internal data pointer */
+	__be16 rbptr;		/* rb BD Pointer */
+	__be16 rcount;		/* Rx internal byte count */
+	__be32 rtemp;		/* Rx temp */
+	__be32 tstate;		/* Tx internal state */
+	__be32 tptr;		/* Tx internal data pointer */
+	__be16 tbptr;		/* Tx BD pointer */
+	__be16 tcount;		/* Tx byte count */
+	__be32 ttemp;		/* Tx temp */
+	__be32 rcrc;		/* temp receive CRC */
+	__be32 tcrc;		/* temp transmit CRC */
+} __attribute__ ((packed));
+
+/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
+#define UCC_SLOW_GUMR_H_SAM_QMC		0x00000000
+#define UCC_SLOW_GUMR_H_SAM_SATM	0x00008000
+#define UCC_SLOW_GUMR_H_REVD		0x00002000
+#define UCC_SLOW_GUMR_H_TRX		0x00001000
+#define UCC_SLOW_GUMR_H_TTX		0x00000800
+#define UCC_SLOW_GUMR_H_CDP		0x00000400
+#define UCC_SLOW_GUMR_H_CTSP		0x00000200
+#define UCC_SLOW_GUMR_H_CDS		0x00000100
+#define UCC_SLOW_GUMR_H_CTSS		0x00000080
+#define UCC_SLOW_GUMR_H_TFL		0x00000040
+#define UCC_SLOW_GUMR_H_RFW		0x00000020
+#define UCC_SLOW_GUMR_H_TXSY		0x00000010
+#define UCC_SLOW_GUMR_H_4SYNC		0x00000004
+#define UCC_SLOW_GUMR_H_8SYNC		0x00000008
+#define UCC_SLOW_GUMR_H_16SYNC		0x0000000c
+#define UCC_SLOW_GUMR_H_RTSM		0x00000002
+#define UCC_SLOW_GUMR_H_RSYN		0x00000001
+
+#define UCC_SLOW_GUMR_L_TCI		0x10000000
+#define UCC_SLOW_GUMR_L_RINV		0x02000000
+#define UCC_SLOW_GUMR_L_TINV		0x01000000
+#define UCC_SLOW_GUMR_L_TEND		0x00040000
+#define UCC_SLOW_GUMR_L_TDCR_MASK	0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_32	        0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_16	        0x00020000
+#define UCC_SLOW_GUMR_L_TDCR_8	        0x00010000
+#define UCC_SLOW_GUMR_L_TDCR_1	        0x00000000
+#define UCC_SLOW_GUMR_L_RDCR_MASK	0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_32		0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_16	        0x00008000
+#define UCC_SLOW_GUMR_L_RDCR_8	        0x00004000
+#define UCC_SLOW_GUMR_L_RDCR_1		0x00000000
+#define UCC_SLOW_GUMR_L_RENC_NRZI	0x00000800
+#define UCC_SLOW_GUMR_L_RENC_NRZ	0x00000000
+#define UCC_SLOW_GUMR_L_TENC_NRZI	0x00000100
+#define UCC_SLOW_GUMR_L_TENC_NRZ	0x00000000
+#define UCC_SLOW_GUMR_L_DIAG_MASK	0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_LE	        0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_ECHO	0x00000080
+#define UCC_SLOW_GUMR_L_DIAG_LOOP	0x00000040
+#define UCC_SLOW_GUMR_L_DIAG_NORM	0x00000000
+#define UCC_SLOW_GUMR_L_ENR		0x00000020
+#define UCC_SLOW_GUMR_L_ENT		0x00000010
+#define UCC_SLOW_GUMR_L_MODE_MASK	0x0000000F
+#define UCC_SLOW_GUMR_L_MODE_BISYNC	0x00000008
+#define UCC_SLOW_GUMR_L_MODE_AHDLC	0x00000006
+#define UCC_SLOW_GUMR_L_MODE_UART	0x00000004
+#define UCC_SLOW_GUMR_L_MODE_QMC	0x00000002
+
+/* General UCC FAST Mode Register */
+#define UCC_FAST_GUMR_TCI	0x20000000
+#define UCC_FAST_GUMR_TRX	0x10000000
+#define UCC_FAST_GUMR_TTX	0x08000000
+#define UCC_FAST_GUMR_CDP	0x04000000
+#define UCC_FAST_GUMR_CTSP	0x02000000
+#define UCC_FAST_GUMR_CDS	0x01000000
+#define UCC_FAST_GUMR_CTSS	0x00800000
+#define UCC_FAST_GUMR_TXSY	0x00020000
+#define UCC_FAST_GUMR_RSYN	0x00010000
+#define UCC_FAST_GUMR_RTSM	0x00002000
+#define UCC_FAST_GUMR_REVD	0x00000400
+#define UCC_FAST_GUMR_ENR	0x00000020
+#define UCC_FAST_GUMR_ENT	0x00000010
+
+/* UART Slow UCC Event Register (UCCE) */
+#define UCC_UART_UCCE_AB	0x0200
+#define UCC_UART_UCCE_IDLE	0x0100
+#define UCC_UART_UCCE_GRA	0x0080
+#define UCC_UART_UCCE_BRKE	0x0040
+#define UCC_UART_UCCE_BRKS	0x0020
+#define UCC_UART_UCCE_CCR	0x0008
+#define UCC_UART_UCCE_BSY	0x0004
+#define UCC_UART_UCCE_TX	0x0002
+#define UCC_UART_UCCE_RX	0x0001
+
+/* HDLC Slow UCC Event Register (UCCE) */
+#define UCC_HDLC_UCCE_GLR	0x1000
+#define UCC_HDLC_UCCE_GLT	0x0800
+#define UCC_HDLC_UCCE_IDLE	0x0100
+#define UCC_HDLC_UCCE_BRKE	0x0040
+#define UCC_HDLC_UCCE_BRKS	0x0020
+#define UCC_HDLC_UCCE_TXE	0x0010
+#define UCC_HDLC_UCCE_RXF	0x0008
+#define UCC_HDLC_UCCE_BSY	0x0004
+#define UCC_HDLC_UCCE_TXB	0x0002
+#define UCC_HDLC_UCCE_RXB	0x0001
+
+/* BISYNC Slow UCC Event Register (UCCE) */
+#define UCC_BISYNC_UCCE_GRA	0x0080
+#define UCC_BISYNC_UCCE_TXE	0x0010
+#define UCC_BISYNC_UCCE_RCH	0x0008
+#define UCC_BISYNC_UCCE_BSY	0x0004
+#define UCC_BISYNC_UCCE_TXB	0x0002
+#define UCC_BISYNC_UCCE_RXB	0x0001
+
+/* Gigabit Ethernet Fast UCC Event Register (UCCE) */
+#define UCC_GETH_UCCE_MPD       0x80000000
+#define UCC_GETH_UCCE_SCAR      0x40000000
+#define UCC_GETH_UCCE_GRA       0x20000000
+#define UCC_GETH_UCCE_CBPR      0x10000000
+#define UCC_GETH_UCCE_BSY       0x08000000
+#define UCC_GETH_UCCE_RXC       0x04000000
+#define UCC_GETH_UCCE_TXC       0x02000000
+#define UCC_GETH_UCCE_TXE       0x01000000
+#define UCC_GETH_UCCE_TXB7      0x00800000
+#define UCC_GETH_UCCE_TXB6      0x00400000
+#define UCC_GETH_UCCE_TXB5      0x00200000
+#define UCC_GETH_UCCE_TXB4      0x00100000
+#define UCC_GETH_UCCE_TXB3      0x00080000
+#define UCC_GETH_UCCE_TXB2      0x00040000
+#define UCC_GETH_UCCE_TXB1      0x00020000
+#define UCC_GETH_UCCE_TXB0      0x00010000
+#define UCC_GETH_UCCE_RXB7      0x00008000
+#define UCC_GETH_UCCE_RXB6      0x00004000
+#define UCC_GETH_UCCE_RXB5      0x00002000
+#define UCC_GETH_UCCE_RXB4      0x00001000
+#define UCC_GETH_UCCE_RXB3      0x00000800
+#define UCC_GETH_UCCE_RXB2      0x00000400
+#define UCC_GETH_UCCE_RXB1      0x00000200
+#define UCC_GETH_UCCE_RXB0      0x00000100
+#define UCC_GETH_UCCE_RXF7      0x00000080
+#define UCC_GETH_UCCE_RXF6      0x00000040
+#define UCC_GETH_UCCE_RXF5      0x00000020
+#define UCC_GETH_UCCE_RXF4      0x00000010
+#define UCC_GETH_UCCE_RXF3      0x00000008
+#define UCC_GETH_UCCE_RXF2      0x00000004
+#define UCC_GETH_UCCE_RXF1      0x00000002
+#define UCC_GETH_UCCE_RXF0      0x00000001
+
+/* UPSMR, when used as a UART */
+#define UCC_UART_UPSMR_FLC		0x8000
+#define UCC_UART_UPSMR_SL		0x4000
+#define UCC_UART_UPSMR_CL_MASK		0x3000
+#define UCC_UART_UPSMR_CL_8		0x3000
+#define UCC_UART_UPSMR_CL_7		0x2000
+#define UCC_UART_UPSMR_CL_6		0x1000
+#define UCC_UART_UPSMR_CL_5		0x0000
+#define UCC_UART_UPSMR_UM_MASK		0x0c00
+#define UCC_UART_UPSMR_UM_NORMAL	0x0000
+#define UCC_UART_UPSMR_UM_MAN_MULTI	0x0400
+#define UCC_UART_UPSMR_UM_AUTO_MULTI	0x0c00
+#define UCC_UART_UPSMR_FRZ		0x0200
+#define UCC_UART_UPSMR_RZS		0x0100
+#define UCC_UART_UPSMR_SYN		0x0080
+#define UCC_UART_UPSMR_DRT		0x0040
+#define UCC_UART_UPSMR_PEN		0x0010
+#define UCC_UART_UPSMR_RPM_MASK		0x000c
+#define UCC_UART_UPSMR_RPM_ODD		0x0000
+#define UCC_UART_UPSMR_RPM_LOW		0x0004
+#define UCC_UART_UPSMR_RPM_EVEN		0x0008
+#define UCC_UART_UPSMR_RPM_HIGH		0x000C
+#define UCC_UART_UPSMR_TPM_MASK		0x0003
+#define UCC_UART_UPSMR_TPM_ODD		0x0000
+#define UCC_UART_UPSMR_TPM_LOW		0x0001
+#define UCC_UART_UPSMR_TPM_EVEN		0x0002
+#define UCC_UART_UPSMR_TPM_HIGH		0x0003
+
+/* UCC Transmit On Demand Register (UTODR) */
+#define UCC_SLOW_TOD	0x8000
+#define UCC_FAST_TOD	0x8000
+
+/* UCC Bus Mode Register masks */
+/* Not to be confused with the Bundle Mode Register */
+#define UCC_BMR_GBL		0x20
+#define UCC_BMR_BO_BE		0x10
+#define UCC_BMR_CETM		0x04
+#define UCC_BMR_DTB		0x02
+#define UCC_BMR_BDB		0x01
+
+/* Function code masks */
+#define FC_GBL				0x20
+#define FC_DTB_LCL			0x02
+#define UCC_FAST_FUNCTION_CODE_GBL	0x20
+#define UCC_FAST_FUNCTION_CODE_DTB_LCL	0x02
+#define UCC_FAST_FUNCTION_CODE_BDB_LCL	0x01
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_QE_H */
diff --git a/arch/powerpc/include/asm/qe_ic.h b/arch/powerpc/include/asm/qe_ic.h
new file mode 100644
index 000000000000..56a7745ca343
--- /dev/null
+++ b/arch/powerpc/include/asm/qe_ic.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * QE IC external definitions and structure.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_QE_IC_H
+#define _ASM_POWERPC_QE_IC_H
+
+#include <linux/irq.h>
+
+#define NUM_OF_QE_IC_GROUPS	6
+
+/* Flags when we init the QE IC */
+#define QE_IC_SPREADMODE_GRP_W			0x00000001
+#define QE_IC_SPREADMODE_GRP_X			0x00000002
+#define QE_IC_SPREADMODE_GRP_Y			0x00000004
+#define QE_IC_SPREADMODE_GRP_Z			0x00000008
+#define QE_IC_SPREADMODE_GRP_RISCA		0x00000010
+#define QE_IC_SPREADMODE_GRP_RISCB		0x00000020
+
+#define QE_IC_LOW_SIGNAL			0x00000100
+#define QE_IC_HIGH_SIGNAL			0x00000200
+
+#define QE_IC_GRP_W_PRI0_DEST_SIGNAL_HIGH	0x00001000
+#define QE_IC_GRP_W_PRI1_DEST_SIGNAL_HIGH	0x00002000
+#define QE_IC_GRP_X_PRI0_DEST_SIGNAL_HIGH	0x00004000
+#define QE_IC_GRP_X_PRI1_DEST_SIGNAL_HIGH	0x00008000
+#define QE_IC_GRP_Y_PRI0_DEST_SIGNAL_HIGH	0x00010000
+#define QE_IC_GRP_Y_PRI1_DEST_SIGNAL_HIGH	0x00020000
+#define QE_IC_GRP_Z_PRI0_DEST_SIGNAL_HIGH	0x00040000
+#define QE_IC_GRP_Z_PRI1_DEST_SIGNAL_HIGH	0x00080000
+#define QE_IC_GRP_RISCA_PRI0_DEST_SIGNAL_HIGH	0x00100000
+#define QE_IC_GRP_RISCA_PRI1_DEST_SIGNAL_HIGH	0x00200000
+#define QE_IC_GRP_RISCB_PRI0_DEST_SIGNAL_HIGH	0x00400000
+#define QE_IC_GRP_RISCB_PRI1_DEST_SIGNAL_HIGH	0x00800000
+#define QE_IC_GRP_W_DEST_SIGNAL_SHIFT		(12)
+
+/* QE interrupt sources groups */
+enum qe_ic_grp_id {
+	QE_IC_GRP_W = 0,	/* QE interrupt controller group W */
+	QE_IC_GRP_X,		/* QE interrupt controller group X */
+	QE_IC_GRP_Y,		/* QE interrupt controller group Y */
+	QE_IC_GRP_Z,		/* QE interrupt controller group Z */
+	QE_IC_GRP_RISCA,	/* QE interrupt controller RISC group A */
+	QE_IC_GRP_RISCB		/* QE interrupt controller RISC group B */
+};
+
+void qe_ic_init(struct device_node *node, unsigned int flags,
+		void (*low_handler)(unsigned int irq, struct irq_desc *desc),
+		void (*high_handler)(unsigned int irq, struct irq_desc *desc));
+void qe_ic_set_highest_priority(unsigned int virq, int high);
+int qe_ic_set_priority(unsigned int virq, unsigned int priority);
+int qe_ic_set_high_priority(unsigned int virq, unsigned int priority, int high);
+
+struct qe_ic;
+unsigned int qe_ic_get_low_irq(struct qe_ic *qe_ic);
+unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic);
+
+static inline void qe_ic_cascade_low_ipic(unsigned int irq,
+					  struct irq_desc *desc)
+{
+	struct qe_ic *qe_ic = desc->handler_data;
+	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+}
+
+static inline void qe_ic_cascade_high_ipic(unsigned int irq,
+					   struct irq_desc *desc)
+{
+	struct qe_ic *qe_ic = desc->handler_data;
+	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+}
+
+static inline void qe_ic_cascade_low_mpic(unsigned int irq,
+					  struct irq_desc *desc)
+{
+	struct qe_ic *qe_ic = desc->handler_data;
+	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+
+	desc->chip->eoi(irq);
+}
+
+static inline void qe_ic_cascade_high_mpic(unsigned int irq,
+					   struct irq_desc *desc)
+{
+	struct qe_ic *qe_ic = desc->handler_data;
+	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+
+	desc->chip->eoi(irq);
+}
+
+static inline void qe_ic_cascade_muxed_mpic(unsigned int irq,
+					    struct irq_desc *desc)
+{
+	struct qe_ic *qe_ic = desc->handler_data;
+	unsigned int cascade_irq;
+
+	cascade_irq = qe_ic_get_high_irq(qe_ic);
+	if (cascade_irq == NO_IRQ)
+		cascade_irq = qe_ic_get_low_irq(qe_ic);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+
+	desc->chip->eoi(irq);
+}
+
+#endif /* _ASM_POWERPC_QE_IC_H */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
new file mode 100644
index 000000000000..c6d1ab650778
--- /dev/null
+++ b/arch/powerpc/include/asm/reg.h
@@ -0,0 +1,788 @@
+/*
+ * Contains the definition of registers common to all PowerPC variants.
+ * If a register definition has been changed in a different PowerPC
+ * variant, we will case it in #ifndef XXX ... #endif, and have the
+ * number used in the Programming Environments Manual For 32-Bit
+ * Implementations of the PowerPC Architecture (a.k.a. Green Book) here.
+ */
+
+#ifndef _ASM_POWERPC_REG_H
+#define _ASM_POWERPC_REG_H
+#ifdef __KERNEL__
+
+#include <linux/stringify.h>
+#include <asm/cputable.h>
+
+/* Pickup Book E specific registers. */
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+#include <asm/reg_booke.h>
+#endif /* CONFIG_BOOKE || CONFIG_40x */
+
+#ifdef CONFIG_FSL_EMB_PERFMON
+#include <asm/reg_fsl_emb.h>
+#endif
+
+#ifdef CONFIG_8xx
+#include <asm/reg_8xx.h>
+#endif /* CONFIG_8xx */
+
+#define MSR_SF_LG	63              /* Enable 64 bit mode */
+#define MSR_ISF_LG	61              /* Interrupt 64b mode valid on 630 */
+#define MSR_HV_LG 	60              /* Hypervisor state */
+#define MSR_VEC_LG	25	        /* Enable AltiVec */
+#define MSR_VSX_LG	23		/* Enable VSX */
+#define MSR_POW_LG	18		/* Enable Power Management */
+#define MSR_WE_LG	18		/* Wait State Enable */
+#define MSR_TGPR_LG	17		/* TLB Update registers in use */
+#define MSR_CE_LG	17		/* Critical Interrupt Enable */
+#define MSR_ILE_LG	16		/* Interrupt Little Endian */
+#define MSR_EE_LG	15		/* External Interrupt Enable */
+#define MSR_PR_LG	14		/* Problem State / Privilege Level */
+#define MSR_FP_LG	13		/* Floating Point enable */
+#define MSR_ME_LG	12		/* Machine Check Enable */
+#define MSR_FE0_LG	11		/* Floating Exception mode 0 */
+#define MSR_SE_LG	10		/* Single Step */
+#define MSR_BE_LG	9		/* Branch Trace */
+#define MSR_DE_LG	9 		/* Debug Exception Enable */
+#define MSR_FE1_LG	8		/* Floating Exception mode 1 */
+#define MSR_IP_LG	6		/* Exception prefix 0x000/0xFFF */
+#define MSR_IR_LG	5 		/* Instruction Relocate */
+#define MSR_DR_LG	4 		/* Data Relocate */
+#define MSR_PE_LG	3		/* Protection Enable */
+#define MSR_PX_LG	2		/* Protection Exclusive Mode */
+#define MSR_PMM_LG	2		/* Performance monitor */
+#define MSR_RI_LG	1		/* Recoverable Exception */
+#define MSR_LE_LG	0 		/* Little Endian */
+
+#ifdef __ASSEMBLY__
+#define __MASK(X)	(1<<(X))
+#else
+#define __MASK(X)	(1UL<<(X))
+#endif
+
+#ifdef CONFIG_PPC64
+#define MSR_SF		__MASK(MSR_SF_LG)	/* Enable 64 bit mode */
+#define MSR_ISF		__MASK(MSR_ISF_LG)	/* Interrupt 64b mode valid on 630 */
+#define MSR_HV 		__MASK(MSR_HV_LG)	/* Hypervisor state */
+#else
+/* so tests for these bits fail on 32-bit */
+#define MSR_SF		0
+#define MSR_ISF		0
+#define MSR_HV		0
+#endif
+
+#define MSR_VEC		__MASK(MSR_VEC_LG)	/* Enable AltiVec */
+#define MSR_VSX		__MASK(MSR_VSX_LG)	/* Enable VSX */
+#define MSR_POW		__MASK(MSR_POW_LG)	/* Enable Power Management */
+#define MSR_WE		__MASK(MSR_WE_LG)	/* Wait State Enable */
+#define MSR_TGPR	__MASK(MSR_TGPR_LG)	/* TLB Update registers in use */
+#define MSR_CE		__MASK(MSR_CE_LG)	/* Critical Interrupt Enable */
+#define MSR_ILE		__MASK(MSR_ILE_LG)	/* Interrupt Little Endian */
+#define MSR_EE		__MASK(MSR_EE_LG)	/* External Interrupt Enable */
+#define MSR_PR		__MASK(MSR_PR_LG)	/* Problem State / Privilege Level */
+#define MSR_FP		__MASK(MSR_FP_LG)	/* Floating Point enable */
+#define MSR_ME		__MASK(MSR_ME_LG)	/* Machine Check Enable */
+#define MSR_FE0		__MASK(MSR_FE0_LG)	/* Floating Exception mode 0 */
+#define MSR_SE		__MASK(MSR_SE_LG)	/* Single Step */
+#define MSR_BE		__MASK(MSR_BE_LG)	/* Branch Trace */
+#define MSR_DE		__MASK(MSR_DE_LG)	/* Debug Exception Enable */
+#define MSR_FE1		__MASK(MSR_FE1_LG)	/* Floating Exception mode 1 */
+#define MSR_IP		__MASK(MSR_IP_LG)	/* Exception prefix 0x000/0xFFF */
+#define MSR_IR		__MASK(MSR_IR_LG)	/* Instruction Relocate */
+#define MSR_DR		__MASK(MSR_DR_LG)	/* Data Relocate */
+#define MSR_PE		__MASK(MSR_PE_LG)	/* Protection Enable */
+#define MSR_PX		__MASK(MSR_PX_LG)	/* Protection Exclusive Mode */
+#ifndef MSR_PMM
+#define MSR_PMM		__MASK(MSR_PMM_LG)	/* Performance monitor */
+#endif
+#define MSR_RI		__MASK(MSR_RI_LG)	/* Recoverable Exception */
+#define MSR_LE		__MASK(MSR_LE_LG)	/* Little Endian */
+
+#ifdef CONFIG_PPC64
+#define MSR_		MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV
+#define MSR_KERNEL      MSR_ | MSR_SF
+
+#define MSR_USER32	MSR_ | MSR_PR | MSR_EE
+#define MSR_USER64	MSR_USER32 | MSR_SF
+
+#else /* 32-bit */
+/* Default MSR for kernel mode. */
+#ifndef MSR_KERNEL	/* reg_booke.h also defines this */
+#define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR)
+#endif
+
+#define MSR_USER	(MSR_KERNEL|MSR_PR|MSR_EE)
+#endif
+
+/* Floating Point Status and Control Register (FPSCR) Fields */
+#define FPSCR_FX	0x80000000	/* FPU exception summary */
+#define FPSCR_FEX	0x40000000	/* FPU enabled exception summary */
+#define FPSCR_VX	0x20000000	/* Invalid operation summary */
+#define FPSCR_OX	0x10000000	/* Overflow exception summary */
+#define FPSCR_UX	0x08000000	/* Underflow exception summary */
+#define FPSCR_ZX	0x04000000	/* Zero-divide exception summary */
+#define FPSCR_XX	0x02000000	/* Inexact exception summary */
+#define FPSCR_VXSNAN	0x01000000	/* Invalid op for SNaN */
+#define FPSCR_VXISI	0x00800000	/* Invalid op for Inv - Inv */
+#define FPSCR_VXIDI	0x00400000	/* Invalid op for Inv / Inv */
+#define FPSCR_VXZDZ	0x00200000	/* Invalid op for Zero / Zero */
+#define FPSCR_VXIMZ	0x00100000	/* Invalid op for Inv * Zero */
+#define FPSCR_VXVC	0x00080000	/* Invalid op for Compare */
+#define FPSCR_FR	0x00040000	/* Fraction rounded */
+#define FPSCR_FI	0x00020000	/* Fraction inexact */
+#define FPSCR_FPRF	0x0001f000	/* FPU Result Flags */
+#define FPSCR_FPCC	0x0000f000	/* FPU Condition Codes */
+#define FPSCR_VXSOFT	0x00000400	/* Invalid op for software request */
+#define FPSCR_VXSQRT	0x00000200	/* Invalid op for square root */
+#define FPSCR_VXCVI	0x00000100	/* Invalid op for integer convert */
+#define FPSCR_VE	0x00000080	/* Invalid op exception enable */
+#define FPSCR_OE	0x00000040	/* IEEE overflow exception enable */
+#define FPSCR_UE	0x00000020	/* IEEE underflow exception enable */
+#define FPSCR_ZE	0x00000010	/* IEEE zero divide exception enable */
+#define FPSCR_XE	0x00000008	/* FP inexact exception enable */
+#define FPSCR_NI	0x00000004	/* FPU non IEEE-Mode */
+#define FPSCR_RN	0x00000003	/* FPU rounding control */
+
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_CTR	0x009	/* Count Register */
+#define SPRN_DSCR	0x11
+#define SPRN_CTRLF	0x088
+#define SPRN_CTRLT	0x098
+#define   CTRL_CT	0xc0000000	/* current thread */
+#define   CTRL_CT0	0x80000000	/* thread 0 */
+#define   CTRL_CT1	0x40000000	/* thread 1 */
+#define   CTRL_TE	0x00c00000	/* thread enable */
+#define   CTRL_RUNLATCH	0x1
+#define SPRN_DABR	0x3F5	/* Data Address Breakpoint Register */
+#define   DABR_TRANSLATION	(1UL << 2)
+#define SPRN_DABR2	0x13D	/* e300 */
+#define SPRN_DABRX	0x3F7	/* Data Address Breakpoint Register Extension */
+#define   DABRX_USER	(1UL << 0)
+#define   DABRX_KERNEL	(1UL << 1)
+#define SPRN_DAR	0x013	/* Data Address Register */
+#define SPRN_DBCR	0x136	/* e300 Data Breakpoint Control Reg */
+#define SPRN_DSISR	0x012	/* Data Storage Interrupt Status Register */
+#define   DSISR_NOHPTE		0x40000000	/* no translation found */
+#define   DSISR_PROTFAULT	0x08000000	/* protection fault */
+#define   DSISR_ISSTORE		0x02000000	/* access was a store */
+#define   DSISR_DABRMATCH	0x00400000	/* hit data breakpoint */
+#define   DSISR_NOSEGMENT	0x00200000	/* STAB/SLB miss */
+#define SPRN_TBRL	0x10C	/* Time Base Read Lower Register (user, R/O) */
+#define SPRN_TBRU	0x10D	/* Time Base Read Upper Register (user, R/O) */
+#define SPRN_TBWL	0x11C	/* Time Base Lower Register (super, R/W) */
+#define SPRN_TBWU	0x11D	/* Time Base Upper Register (super, R/W) */
+#define SPRN_SPURR	0x134	/* Scaled PURR */
+#define SPRN_HIOR	0x137	/* 970 Hypervisor interrupt offset */
+#define SPRN_LPCR	0x13E	/* LPAR Control Register */
+#define SPRN_DBAT0L	0x219	/* Data BAT 0 Lower Register */
+#define SPRN_DBAT0U	0x218	/* Data BAT 0 Upper Register */
+#define SPRN_DBAT1L	0x21B	/* Data BAT 1 Lower Register */
+#define SPRN_DBAT1U	0x21A	/* Data BAT 1 Upper Register */
+#define SPRN_DBAT2L	0x21D	/* Data BAT 2 Lower Register */
+#define SPRN_DBAT2U	0x21C	/* Data BAT 2 Upper Register */
+#define SPRN_DBAT3L	0x21F	/* Data BAT 3 Lower Register */
+#define SPRN_DBAT3U	0x21E	/* Data BAT 3 Upper Register */
+#define SPRN_DBAT4L	0x239	/* Data BAT 4 Lower Register */
+#define SPRN_DBAT4U	0x238	/* Data BAT 4 Upper Register */
+#define SPRN_DBAT5L	0x23B	/* Data BAT 5 Lower Register */
+#define SPRN_DBAT5U	0x23A	/* Data BAT 5 Upper Register */
+#define SPRN_DBAT6L	0x23D	/* Data BAT 6 Lower Register */
+#define SPRN_DBAT6U	0x23C	/* Data BAT 6 Upper Register */
+#define SPRN_DBAT7L	0x23F	/* Data BAT 7 Lower Register */
+#define SPRN_DBAT7U	0x23E	/* Data BAT 7 Upper Register */
+
+#define SPRN_DEC	0x016		/* Decrement Register */
+#define SPRN_DER	0x095		/* Debug Enable Regsiter */
+#define DER_RSTE	0x40000000	/* Reset Interrupt */
+#define DER_CHSTPE	0x20000000	/* Check Stop */
+#define DER_MCIE	0x10000000	/* Machine Check Interrupt */
+#define DER_EXTIE	0x02000000	/* External Interrupt */
+#define DER_ALIE	0x01000000	/* Alignment Interrupt */
+#define DER_PRIE	0x00800000	/* Program Interrupt */
+#define DER_FPUVIE	0x00400000	/* FP Unavailable Interrupt */
+#define DER_DECIE	0x00200000	/* Decrementer Interrupt */
+#define DER_SYSIE	0x00040000	/* System Call Interrupt */
+#define DER_TRE		0x00020000	/* Trace Interrupt */
+#define DER_SEIE	0x00004000	/* FP SW Emulation Interrupt */
+#define DER_ITLBMSE	0x00002000	/* Imp. Spec. Instruction TLB Miss */
+#define DER_ITLBERE	0x00001000	/* Imp. Spec. Instruction TLB Error */
+#define DER_DTLBMSE	0x00000800	/* Imp. Spec. Data TLB Miss */
+#define DER_DTLBERE	0x00000400	/* Imp. Spec. Data TLB Error */
+#define DER_LBRKE	0x00000008	/* Load/Store Breakpoint Interrupt */
+#define DER_IBRKE	0x00000004	/* Instruction Breakpoint Interrupt */
+#define DER_EBRKE	0x00000002	/* External Breakpoint Interrupt */
+#define DER_DPIE	0x00000001	/* Dev. Port Nonmaskable Request */
+#define SPRN_DMISS	0x3D0		/* Data TLB Miss Register */
+#define SPRN_EAR	0x11A		/* External Address Register */
+#define SPRN_HASH1	0x3D2		/* Primary Hash Address Register */
+#define SPRN_HASH2	0x3D3		/* Secondary Hash Address Resgister */
+#define SPRN_HID0	0x3F0		/* Hardware Implementation Register 0 */
+#define HID0_EMCP	(1<<31)		/* Enable Machine Check pin */
+#define HID0_EBA	(1<<29)		/* Enable Bus Address Parity */
+#define HID0_EBD	(1<<28)		/* Enable Bus Data Parity */
+#define HID0_SBCLK	(1<<27)
+#define HID0_EICE	(1<<26)
+#define HID0_TBEN	(1<<26)		/* Timebase enable - 745x */
+#define HID0_ECLK	(1<<25)
+#define HID0_PAR	(1<<24)
+#define HID0_STEN	(1<<24)		/* Software table search enable - 745x */
+#define HID0_HIGH_BAT	(1<<23)		/* Enable high BATs - 7455 */
+#define HID0_DOZE	(1<<23)
+#define HID0_NAP	(1<<22)
+#define HID0_SLEEP	(1<<21)
+#define HID0_DPM	(1<<20)
+#define HID0_BHTCLR	(1<<18)		/* Clear branch history table - 7450 */
+#define HID0_XAEN	(1<<17)		/* Extended addressing enable - 7450 */
+#define HID0_NHR	(1<<16)		/* Not hard reset (software bit-7450)*/
+#define HID0_ICE	(1<<15)		/* Instruction Cache Enable */
+#define HID0_DCE	(1<<14)		/* Data Cache Enable */
+#define HID0_ILOCK	(1<<13)		/* Instruction Cache Lock */
+#define HID0_DLOCK	(1<<12)		/* Data Cache Lock */
+#define HID0_ICFI	(1<<11)		/* Instr. Cache Flash Invalidate */
+#define HID0_DCI	(1<<10)		/* Data Cache Invalidate */
+#define HID0_SPD	(1<<9)		/* Speculative disable */
+#define HID0_DAPUEN	(1<<8)		/* Debug APU enable */
+#define HID0_SGE	(1<<7)		/* Store Gathering Enable */
+#define HID0_SIED	(1<<7)		/* Serial Instr. Execution [Disable] */
+#define HID0_DCFA	(1<<6)		/* Data Cache Flush Assist */
+#define HID0_LRSTK	(1<<4)		/* Link register stack - 745x */
+#define HID0_BTIC	(1<<5)		/* Branch Target Instr Cache Enable */
+#define HID0_ABE	(1<<3)		/* Address Broadcast Enable */
+#define HID0_FOLD	(1<<3)		/* Branch Folding enable - 745x */
+#define HID0_BHTE	(1<<2)		/* Branch History Table Enable */
+#define HID0_BTCD	(1<<1)		/* Branch target cache disable */
+#define HID0_NOPDST	(1<<1)		/* No-op dst, dstt, etc. instr. */
+#define HID0_NOPTI	(1<<0)		/* No-op dcbt and dcbst instr. */
+
+#define SPRN_HID1	0x3F1		/* Hardware Implementation Register 1 */
+#define HID1_EMCP	(1<<31)		/* 7450 Machine Check Pin Enable */
+#define HID1_DFS	(1<<22)		/* 7447A Dynamic Frequency Scaling */
+#define HID1_PC0	(1<<16)		/* 7450 PLL_CFG[0] */
+#define HID1_PC1	(1<<15)		/* 7450 PLL_CFG[1] */
+#define HID1_PC2	(1<<14)		/* 7450 PLL_CFG[2] */
+#define HID1_PC3	(1<<13)		/* 7450 PLL_CFG[3] */
+#define HID1_SYNCBE	(1<<11)		/* 7450 ABE for sync, eieio */
+#define HID1_ABE	(1<<10)		/* 7450 Address Broadcast Enable */
+#define HID1_PS		(1<<16)		/* 750FX PLL selection */
+#define SPRN_HID2	0x3F8		/* Hardware Implementation Register 2 */
+#define SPRN_IABR	0x3F2	/* Instruction Address Breakpoint Register */
+#define SPRN_IABR2	0x3FA		/* 83xx */
+#define SPRN_IBCR	0x135		/* 83xx Insn Breakpoint Control Reg */
+#define SPRN_HID4	0x3F4		/* 970 HID4 */
+#define SPRN_HID5	0x3F6		/* 970 HID5 */
+#define SPRN_HID6	0x3F9	/* BE HID 6 */
+#define   HID6_LB	(0x0F<<12) /* Concurrent Large Page Modes */
+#define   HID6_DLP	(1<<20)	/* Disable all large page modes (4K only) */
+#define SPRN_TSC_CELL	0x399	/* Thread switch control on Cell */
+#define   TSC_CELL_DEC_ENABLE_0	0x400000 /* Decrementer Interrupt */
+#define   TSC_CELL_DEC_ENABLE_1	0x200000 /* Decrementer Interrupt */
+#define   TSC_CELL_EE_ENABLE	0x100000 /* External Interrupt */
+#define   TSC_CELL_EE_BOOST	0x080000 /* External Interrupt Boost */
+#define SPRN_TSC 	0x3FD	/* Thread switch control on others */
+#define SPRN_TST 	0x3FC	/* Thread switch timeout on others */
+#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2)
+#define SPRN_IAC1	0x3F4		/* Instruction Address Compare 1 */
+#define SPRN_IAC2	0x3F5		/* Instruction Address Compare 2 */
+#endif
+#define SPRN_IBAT0L	0x211		/* Instruction BAT 0 Lower Register */
+#define SPRN_IBAT0U	0x210		/* Instruction BAT 0 Upper Register */
+#define SPRN_IBAT1L	0x213		/* Instruction BAT 1 Lower Register */
+#define SPRN_IBAT1U	0x212		/* Instruction BAT 1 Upper Register */
+#define SPRN_IBAT2L	0x215		/* Instruction BAT 2 Lower Register */
+#define SPRN_IBAT2U	0x214		/* Instruction BAT 2 Upper Register */
+#define SPRN_IBAT3L	0x217		/* Instruction BAT 3 Lower Register */
+#define SPRN_IBAT3U	0x216		/* Instruction BAT 3 Upper Register */
+#define SPRN_IBAT4L	0x231		/* Instruction BAT 4 Lower Register */
+#define SPRN_IBAT4U	0x230		/* Instruction BAT 4 Upper Register */
+#define SPRN_IBAT5L	0x233		/* Instruction BAT 5 Lower Register */
+#define SPRN_IBAT5U	0x232		/* Instruction BAT 5 Upper Register */
+#define SPRN_IBAT6L	0x235		/* Instruction BAT 6 Lower Register */
+#define SPRN_IBAT6U	0x234		/* Instruction BAT 6 Upper Register */
+#define SPRN_IBAT7L	0x237		/* Instruction BAT 7 Lower Register */
+#define SPRN_IBAT7U	0x236		/* Instruction BAT 7 Upper Register */
+#define SPRN_ICMP	0x3D5		/* Instruction TLB Compare Register */
+#define SPRN_ICTC	0x3FB	/* Instruction Cache Throttling Control Reg */
+#define SPRN_ICTRL	0x3F3	/* 1011 7450 icache and interrupt ctrl */
+#define ICTRL_EICE	0x08000000	/* enable icache parity errs */
+#define ICTRL_EDC	0x04000000	/* enable dcache parity errs */
+#define ICTRL_EICP	0x00000100	/* enable icache par. check */
+#define SPRN_IMISS	0x3D4		/* Instruction TLB Miss Register */
+#define SPRN_IMMR	0x27E		/* Internal Memory Map Register */
+#define SPRN_L2CR	0x3F9		/* Level 2 Cache Control Regsiter */
+#define SPRN_L2CR2	0x3f8
+#define L2CR_L2E		0x80000000	/* L2 enable */
+#define L2CR_L2PE		0x40000000	/* L2 parity enable */
+#define L2CR_L2SIZ_MASK		0x30000000	/* L2 size mask */
+#define L2CR_L2SIZ_256KB	0x10000000	/* L2 size 256KB */
+#define L2CR_L2SIZ_512KB	0x20000000	/* L2 size 512KB */
+#define L2CR_L2SIZ_1MB		0x30000000	/* L2 size 1MB */
+#define L2CR_L2CLK_MASK		0x0e000000	/* L2 clock mask */
+#define L2CR_L2CLK_DISABLED	0x00000000	/* L2 clock disabled */
+#define L2CR_L2CLK_DIV1		0x02000000	/* L2 clock / 1 */
+#define L2CR_L2CLK_DIV1_5	0x04000000	/* L2 clock / 1.5 */
+#define L2CR_L2CLK_DIV2		0x08000000	/* L2 clock / 2 */
+#define L2CR_L2CLK_DIV2_5	0x0a000000	/* L2 clock / 2.5 */
+#define L2CR_L2CLK_DIV3		0x0c000000	/* L2 clock / 3 */
+#define L2CR_L2RAM_MASK		0x01800000	/* L2 RAM type mask */
+#define L2CR_L2RAM_FLOW		0x00000000	/* L2 RAM flow through */
+#define L2CR_L2RAM_PIPE		0x01000000	/* L2 RAM pipelined */
+#define L2CR_L2RAM_PIPE_LW	0x01800000	/* L2 RAM pipelined latewr */
+#define L2CR_L2DO		0x00400000	/* L2 data only */
+#define L2CR_L2I		0x00200000	/* L2 global invalidate */
+#define L2CR_L2CTL		0x00100000	/* L2 RAM control */
+#define L2CR_L2WT		0x00080000	/* L2 write-through */
+#define L2CR_L2TS		0x00040000	/* L2 test support */
+#define L2CR_L2OH_MASK		0x00030000	/* L2 output hold mask */
+#define L2CR_L2OH_0_5		0x00000000	/* L2 output hold 0.5 ns */
+#define L2CR_L2OH_1_0		0x00010000	/* L2 output hold 1.0 ns */
+#define L2CR_L2SL		0x00008000	/* L2 DLL slow */
+#define L2CR_L2DF		0x00004000	/* L2 differential clock */
+#define L2CR_L2BYP		0x00002000	/* L2 DLL bypass */
+#define L2CR_L2IP		0x00000001	/* L2 GI in progress */
+#define L2CR_L2IO_745x		0x00100000	/* L2 instr. only (745x) */
+#define L2CR_L2DO_745x		0x00010000	/* L2 data only (745x) */
+#define L2CR_L2REP_745x		0x00001000	/* L2 repl. algorithm (745x) */
+#define L2CR_L2HWF_745x		0x00000800	/* L2 hardware flush (745x) */
+#define SPRN_L3CR		0x3FA	/* Level 3 Cache Control Regsiter */
+#define L3CR_L3E		0x80000000	/* L3 enable */
+#define L3CR_L3PE		0x40000000	/* L3 data parity enable */
+#define L3CR_L3APE		0x20000000	/* L3 addr parity enable */
+#define L3CR_L3SIZ		0x10000000	/* L3 size */
+#define L3CR_L3CLKEN		0x08000000	/* L3 clock enable */
+#define L3CR_L3RES		0x04000000	/* L3 special reserved bit */
+#define L3CR_L3CLKDIV		0x03800000	/* L3 clock divisor */
+#define L3CR_L3IO		0x00400000	/* L3 instruction only */
+#define L3CR_L3SPO		0x00040000	/* L3 sample point override */
+#define L3CR_L3CKSP		0x00030000	/* L3 clock sample point */
+#define L3CR_L3PSP		0x0000e000	/* L3 P-clock sample point */
+#define L3CR_L3REP		0x00001000	/* L3 replacement algorithm */
+#define L3CR_L3HWF		0x00000800	/* L3 hardware flush */
+#define L3CR_L3I		0x00000400	/* L3 global invalidate */
+#define L3CR_L3RT		0x00000300	/* L3 SRAM type */
+#define L3CR_L3NIRCA		0x00000080	/* L3 non-integer ratio clock adj. */
+#define L3CR_L3DO		0x00000040	/* L3 data only mode */
+#define L3CR_PMEN		0x00000004	/* L3 private memory enable */
+#define L3CR_PMSIZ		0x00000001	/* L3 private memory size */
+
+#define SPRN_MSSCR0	0x3f6	/* Memory Subsystem Control Register 0 */
+#define SPRN_MSSSR0	0x3f7	/* Memory Subsystem Status Register 1 */
+#define SPRN_LDSTCR	0x3f8	/* Load/Store control register */
+#define SPRN_LDSTDB	0x3f4	/* */
+#define SPRN_LR		0x008	/* Link Register */
+#ifndef SPRN_PIR
+#define SPRN_PIR	0x3FF	/* Processor Identification Register */
+#endif
+#define SPRN_PTEHI	0x3D5	/* 981 7450 PTE HI word (S/W TLB load) */
+#define SPRN_PTELO	0x3D6	/* 982 7450 PTE LO word (S/W TLB load) */
+#define SPRN_PURR	0x135	/* Processor Utilization of Resources Reg */
+#define SPRN_PVR	0x11F	/* Processor Version Register */
+#define SPRN_RPA	0x3D6	/* Required Physical Address Register */
+#define SPRN_SDA	0x3BF	/* Sampled Data Address Register */
+#define SPRN_SDR1	0x019	/* MMU Hash Base Register */
+#define SPRN_ASR	0x118   /* Address Space Register */
+#define SPRN_SIA	0x3BB	/* Sampled Instruction Address Register */
+#define SPRN_SPRG0	0x110	/* Special Purpose Register General 0 */
+#define SPRN_SPRG1	0x111	/* Special Purpose Register General 1 */
+#define SPRN_SPRG2	0x112	/* Special Purpose Register General 2 */
+#define SPRN_SPRG3	0x113	/* Special Purpose Register General 3 */
+#define SPRN_SPRG4	0x114	/* Special Purpose Register General 4 */
+#define SPRN_SPRG5	0x115	/* Special Purpose Register General 5 */
+#define SPRN_SPRG6	0x116	/* Special Purpose Register General 6 */
+#define SPRN_SPRG7	0x117	/* Special Purpose Register General 7 */
+#define SPRN_SRR0	0x01A	/* Save/Restore Register 0 */
+#define SPRN_SRR1	0x01B	/* Save/Restore Register 1 */
+#define   SRR1_WAKEMASK		0x00380000 /* reason for wakeup */
+#define   SRR1_WAKERESET	0x00380000 /* System reset */
+#define   SRR1_WAKESYSERR	0x00300000 /* System error */
+#define   SRR1_WAKEEE		0x00200000 /* External interrupt */
+#define   SRR1_WAKEMT		0x00280000 /* mtctrl */
+#define   SRR1_WAKEDEC		0x00180000 /* Decrementer interrupt */
+#define   SRR1_WAKETHERM	0x00100000 /* Thermal management interrupt */
+#define SPRN_HSRR0	0x13A	/* Save/Restore Register 0 */
+#define SPRN_HSRR1	0x13B	/* Save/Restore Register 1 */
+
+#define SPRN_TBCTL	0x35f	/* PA6T Timebase control register */
+#define   TBCTL_FREEZE		0x0000000000000000ull /* Freeze all tbs */
+#define   TBCTL_RESTART		0x0000000100000000ull /* Restart all tbs */
+#define   TBCTL_UPDATE_UPPER	0x0000000200000000ull /* Set upper 32 bits */
+#define   TBCTL_UPDATE_LOWER	0x0000000300000000ull /* Set lower 32 bits */
+
+#ifndef SPRN_SVR
+#define SPRN_SVR	0x11E	/* System Version Register */
+#endif
+#define SPRN_THRM1	0x3FC		/* Thermal Management Register 1 */
+/* these bits were defined in inverted endian sense originally, ugh, confusing */
+#define THRM1_TIN	(1 << 31)
+#define THRM1_TIV	(1 << 30)
+#define THRM1_THRES(x)	((x&0x7f)<<23)
+#define THRM3_SITV(x)	((x&0x3fff)<<1)
+#define THRM1_TID	(1<<2)
+#define THRM1_TIE	(1<<1)
+#define THRM1_V		(1<<0)
+#define SPRN_THRM2	0x3FD		/* Thermal Management Register 2 */
+#define SPRN_THRM3	0x3FE		/* Thermal Management Register 3 */
+#define THRM3_E		(1<<0)
+#define SPRN_TLBMISS	0x3D4		/* 980 7450 TLB Miss Register */
+#define SPRN_UMMCR0	0x3A8	/* User Monitor Mode Control Register 0 */
+#define SPRN_UMMCR1	0x3AC	/* User Monitor Mode Control Register 0 */
+#define SPRN_UPMC1	0x3A9	/* User Performance Counter Register 1 */
+#define SPRN_UPMC2	0x3AA	/* User Performance Counter Register 2 */
+#define SPRN_UPMC3	0x3AD	/* User Performance Counter Register 3 */
+#define SPRN_UPMC4	0x3AE	/* User Performance Counter Register 4 */
+#define SPRN_USIA	0x3AB	/* User Sampled Instruction Address Register */
+#define SPRN_VRSAVE	0x100	/* Vector Register Save Register */
+#define SPRN_XER	0x001	/* Fixed Point Exception Register */
+
+#define SPRN_SCOMC	0x114	/* SCOM Access Control */
+#define SPRN_SCOMD	0x115	/* SCOM Access DATA */
+
+/* Performance monitor SPRs */
+#ifdef CONFIG_PPC64
+#define SPRN_MMCR0	795
+#define   MMCR0_FC	0x80000000UL /* freeze counters */
+#define   MMCR0_FCS	0x40000000UL /* freeze in supervisor state */
+#define   MMCR0_KERNEL_DISABLE MMCR0_FCS
+#define   MMCR0_FCP	0x20000000UL /* freeze in problem state */
+#define   MMCR0_PROBLEM_DISABLE MMCR0_FCP
+#define   MMCR0_FCM1	0x10000000UL /* freeze counters while MSR mark = 1 */
+#define   MMCR0_FCM0	0x08000000UL /* freeze counters while MSR mark = 0 */
+#define   MMCR0_PMXE	0x04000000UL /* performance monitor exception enable */
+#define   MMCR0_FCECE	0x02000000UL /* freeze ctrs on enabled cond or event */
+#define   MMCR0_TBEE	0x00400000UL /* time base exception enable */
+#define   MMCR0_PMC1CE	0x00008000UL /* PMC1 count enable*/
+#define   MMCR0_PMCjCE	0x00004000UL /* PMCj count enable*/
+#define   MMCR0_TRIGGER	0x00002000UL /* TRIGGER enable */
+#define   MMCR0_PMAO	0x00000080UL /* performance monitor alert has occurred, set to 0 after handling exception */
+#define   MMCR0_SHRFC	0x00000040UL /* SHRre freeze conditions between threads */
+#define   MMCR0_FCTI	0x00000008UL /* freeze counters in tags inactive mode */
+#define   MMCR0_FCTA	0x00000004UL /* freeze counters in tags active mode */
+#define   MMCR0_FCWAIT	0x00000002UL /* freeze counter in WAIT state */
+#define   MMCR0_FCHV	0x00000001UL /* freeze conditions in hypervisor mode */
+#define SPRN_MMCR1	798
+#define SPRN_MMCRA	0x312
+#define   MMCRA_SIHV	0x10000000UL /* state of MSR HV when SIAR set */
+#define   MMCRA_SIPR	0x08000000UL /* state of MSR PR when SIAR set */
+#define   MMCRA_SLOT	0x07000000UL /* SLOT bits (37-39) */
+#define   MMCRA_SLOT_SHIFT	24
+#define   MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */
+#define   POWER6_MMCRA_SIHV   0x0000040000000000ULL
+#define   POWER6_MMCRA_SIPR   0x0000020000000000ULL
+#define   POWER6_MMCRA_THRM	0x00000020UL
+#define   POWER6_MMCRA_OTHER	0x0000000EUL
+#define SPRN_PMC1	787
+#define SPRN_PMC2	788
+#define SPRN_PMC3	789
+#define SPRN_PMC4	790
+#define SPRN_PMC5	791
+#define SPRN_PMC6	792
+#define SPRN_PMC7	793
+#define SPRN_PMC8	794
+#define SPRN_SIAR	780
+#define SPRN_SDAR	781
+
+#define SPRN_PA6T_MMCR0 795
+#define   PA6T_MMCR0_EN0	0x0000000000000001UL
+#define   PA6T_MMCR0_EN1	0x0000000000000002UL
+#define   PA6T_MMCR0_EN2	0x0000000000000004UL
+#define   PA6T_MMCR0_EN3	0x0000000000000008UL
+#define   PA6T_MMCR0_EN4	0x0000000000000010UL
+#define   PA6T_MMCR0_EN5	0x0000000000000020UL
+#define   PA6T_MMCR0_SUPEN	0x0000000000000040UL
+#define   PA6T_MMCR0_PREN	0x0000000000000080UL
+#define   PA6T_MMCR0_HYPEN	0x0000000000000100UL
+#define   PA6T_MMCR0_FCM0	0x0000000000000200UL
+#define   PA6T_MMCR0_FCM1	0x0000000000000400UL
+#define   PA6T_MMCR0_INTGEN	0x0000000000000800UL
+#define   PA6T_MMCR0_INTEN0	0x0000000000001000UL
+#define   PA6T_MMCR0_INTEN1	0x0000000000002000UL
+#define   PA6T_MMCR0_INTEN2	0x0000000000004000UL
+#define   PA6T_MMCR0_INTEN3	0x0000000000008000UL
+#define   PA6T_MMCR0_INTEN4	0x0000000000010000UL
+#define   PA6T_MMCR0_INTEN5	0x0000000000020000UL
+#define   PA6T_MMCR0_DISCNT	0x0000000000040000UL
+#define   PA6T_MMCR0_UOP	0x0000000000080000UL
+#define   PA6T_MMCR0_TRG	0x0000000000100000UL
+#define   PA6T_MMCR0_TRGEN	0x0000000000200000UL
+#define   PA6T_MMCR0_TRGREG	0x0000000001600000UL
+#define   PA6T_MMCR0_SIARLOG	0x0000000002000000UL
+#define   PA6T_MMCR0_SDARLOG	0x0000000004000000UL
+#define   PA6T_MMCR0_PROEN	0x0000000008000000UL
+#define   PA6T_MMCR0_PROLOG	0x0000000010000000UL
+#define   PA6T_MMCR0_DAMEN2	0x0000000020000000UL
+#define   PA6T_MMCR0_DAMEN3	0x0000000040000000UL
+#define   PA6T_MMCR0_DAMEN4	0x0000000080000000UL
+#define   PA6T_MMCR0_DAMEN5	0x0000000100000000UL
+#define   PA6T_MMCR0_DAMSEL2	0x0000000200000000UL
+#define   PA6T_MMCR0_DAMSEL3	0x0000000400000000UL
+#define   PA6T_MMCR0_DAMSEL4	0x0000000800000000UL
+#define   PA6T_MMCR0_DAMSEL5	0x0000001000000000UL
+#define   PA6T_MMCR0_HANDDIS	0x0000002000000000UL
+#define   PA6T_MMCR0_PCTEN	0x0000004000000000UL
+#define   PA6T_MMCR0_SOCEN	0x0000008000000000UL
+#define   PA6T_MMCR0_SOCMOD	0x0000010000000000UL
+
+#define SPRN_PA6T_MMCR1 798
+#define   PA6T_MMCR1_ES2	0x00000000000000ffUL
+#define   PA6T_MMCR1_ES3	0x000000000000ff00UL
+#define   PA6T_MMCR1_ES4	0x0000000000ff0000UL
+#define   PA6T_MMCR1_ES5	0x00000000ff000000UL
+
+#define SPRN_PA6T_UPMC0 771	/* User PerfMon Counter 0 */
+#define SPRN_PA6T_UPMC1 772	/* ... */
+#define SPRN_PA6T_UPMC2 773
+#define SPRN_PA6T_UPMC3 774
+#define SPRN_PA6T_UPMC4 775
+#define SPRN_PA6T_UPMC5 776
+#define SPRN_PA6T_UMMCR0 779	/* User Monitor Mode Control Register 0 */
+#define SPRN_PA6T_SIAR	780	/* Sampled Instruction Address */
+#define SPRN_PA6T_UMMCR1 782	/* User Monitor Mode Control Register 1 */
+#define SPRN_PA6T_SIER	785	/* Sampled Instruction Event Register */
+#define SPRN_PA6T_PMC0	787
+#define SPRN_PA6T_PMC1	788
+#define SPRN_PA6T_PMC2	789
+#define SPRN_PA6T_PMC3	790
+#define SPRN_PA6T_PMC4	791
+#define SPRN_PA6T_PMC5	792
+#define SPRN_PA6T_TSR0	793	/* Timestamp Register 0 */
+#define SPRN_PA6T_TSR1	794	/* Timestamp Register 1 */
+#define SPRN_PA6T_TSR2	799	/* Timestamp Register 2 */
+#define SPRN_PA6T_TSR3	784	/* Timestamp Register 3 */
+
+#define SPRN_PA6T_IER	981	/* Icache Error Register */
+#define SPRN_PA6T_DER	982	/* Dcache Error Register */
+#define SPRN_PA6T_BER	862	/* BIU Error Address Register */
+#define SPRN_PA6T_MER	849	/* MMU Error Register */
+
+#define SPRN_PA6T_IMA0	880	/* Instruction Match Array 0 */
+#define SPRN_PA6T_IMA1	881	/* ... */
+#define SPRN_PA6T_IMA2	882
+#define SPRN_PA6T_IMA3	883
+#define SPRN_PA6T_IMA4	884
+#define SPRN_PA6T_IMA5	885
+#define SPRN_PA6T_IMA6	886
+#define SPRN_PA6T_IMA7	887
+#define SPRN_PA6T_IMA8	888
+#define SPRN_PA6T_IMA9	889
+#define SPRN_PA6T_BTCR	978	/* Breakpoint and Tagging Control Register */
+#define SPRN_PA6T_IMAAT	979	/* Instruction Match Array Action Table */
+#define SPRN_PA6T_PCCR	1019	/* Power Counter Control Register */
+#define SPRN_BKMK	1020	/* Cell Bookmark Register */
+#define SPRN_PA6T_RPCCR	1021	/* Retire PC Trace Control Register */
+
+
+#else /* 32-bit */
+#define SPRN_MMCR0	952	/* Monitor Mode Control Register 0 */
+#define   MMCR0_FC	0x80000000UL /* freeze counters */
+#define   MMCR0_FCS	0x40000000UL /* freeze in supervisor state */
+#define   MMCR0_FCP	0x20000000UL /* freeze in problem state */
+#define   MMCR0_FCM1	0x10000000UL /* freeze counters while MSR mark = 1 */
+#define   MMCR0_FCM0	0x08000000UL /* freeze counters while MSR mark = 0 */
+#define   MMCR0_PMXE	0x04000000UL /* performance monitor exception enable */
+#define   MMCR0_FCECE	0x02000000UL /* freeze ctrs on enabled cond or event */
+#define   MMCR0_TBEE	0x00400000UL /* time base exception enable */
+#define   MMCR0_PMC1CE	0x00008000UL /* PMC1 count enable*/
+#define   MMCR0_PMCnCE	0x00004000UL /* count enable for all but PMC 1*/
+#define   MMCR0_TRIGGER	0x00002000UL /* TRIGGER enable */
+#define   MMCR0_PMC1SEL	0x00001fc0UL /* PMC 1 Event */
+#define   MMCR0_PMC2SEL	0x0000003fUL /* PMC 2 Event */
+
+#define SPRN_MMCR1	956
+#define   MMCR1_PMC3SEL	0xf8000000UL /* PMC 3 Event */
+#define   MMCR1_PMC4SEL	0x07c00000UL /* PMC 4 Event */
+#define   MMCR1_PMC5SEL	0x003e0000UL /* PMC 5 Event */
+#define   MMCR1_PMC6SEL 0x0001f800UL /* PMC 6 Event */
+#define SPRN_MMCR2	944
+#define SPRN_PMC1	953	/* Performance Counter Register 1 */
+#define SPRN_PMC2	954	/* Performance Counter Register 2 */
+#define SPRN_PMC3	957	/* Performance Counter Register 3 */
+#define SPRN_PMC4	958	/* Performance Counter Register 4 */
+#define SPRN_PMC5	945	/* Performance Counter Register 5 */
+#define SPRN_PMC6	946	/* Performance Counter Register 6 */
+
+#define SPRN_SIAR	955	/* Sampled Instruction Address Register */
+
+/* Bit definitions for MMCR0 and PMC1 / PMC2. */
+#define MMCR0_PMC1_CYCLES	(1 << 7)
+#define MMCR0_PMC1_ICACHEMISS	(5 << 7)
+#define MMCR0_PMC1_DTLB		(6 << 7)
+#define MMCR0_PMC2_DCACHEMISS	0x6
+#define MMCR0_PMC2_CYCLES	0x1
+#define MMCR0_PMC2_ITLB		0x7
+#define MMCR0_PMC2_LOADMISSTIME	0x5
+#endif
+
+/*
+ * An mtfsf instruction with the L bit set. On CPUs that support this a
+ * full 64bits of FPSCR is restored and on other CPUs the L bit is ignored.
+ *
+ * Until binutils gets the new form of mtfsf, hardwire the instruction.
+ */
+#ifdef CONFIG_PPC64
+#define MTFSF_L(REG) \
+	.long (0xfc00058e | ((0xff) << 17) | ((REG) << 11) | (1 << 25))
+#else
+#define MTFSF_L(REG)	mtfsf	0xff, (REG)
+#endif
+
+/* Processor Version Register (PVR) field extraction */
+
+#define PVR_VER(pvr)	(((pvr) >>  16) & 0xFFFF)	/* Version field */
+#define PVR_REV(pvr)	(((pvr) >>   0) & 0xFFFF)	/* Revison field */
+
+#define __is_processor(pv)	(PVR_VER(mfspr(SPRN_PVR)) == (pv))
+
+/*
+ * IBM has further subdivided the standard PowerPC 16-bit version and
+ * revision subfields of the PVR for the PowerPC 403s into the following:
+ */
+
+#define PVR_FAM(pvr)	(((pvr) >> 20) & 0xFFF)	/* Family field */
+#define PVR_MEM(pvr)	(((pvr) >> 16) & 0xF)	/* Member field */
+#define PVR_CORE(pvr)	(((pvr) >> 12) & 0xF)	/* Core field */
+#define PVR_CFG(pvr)	(((pvr) >>  8) & 0xF)	/* Configuration field */
+#define PVR_MAJ(pvr)	(((pvr) >>  4) & 0xF)	/* Major revision field */
+#define PVR_MIN(pvr)	(((pvr) >>  0) & 0xF)	/* Minor revision field */
+
+/* Processor Version Numbers */
+
+#define PVR_403GA	0x00200000
+#define PVR_403GB	0x00200100
+#define PVR_403GC	0x00200200
+#define PVR_403GCX	0x00201400
+#define PVR_405GP	0x40110000
+#define PVR_STB03XXX	0x40310000
+#define PVR_NP405H	0x41410000
+#define PVR_NP405L	0x41610000
+#define PVR_601		0x00010000
+#define PVR_602		0x00050000
+#define PVR_603		0x00030000
+#define PVR_603e	0x00060000
+#define PVR_603ev	0x00070000
+#define PVR_603r	0x00071000
+#define PVR_604		0x00040000
+#define PVR_604e	0x00090000
+#define PVR_604r	0x000A0000
+#define PVR_620		0x00140000
+#define PVR_740		0x00080000
+#define PVR_750		PVR_740
+#define PVR_740P	0x10080000
+#define PVR_750P	PVR_740P
+#define PVR_7400	0x000C0000
+#define PVR_7410	0x800C0000
+#define PVR_7450	0x80000000
+#define PVR_8540	0x80200000
+#define PVR_8560	0x80200000
+/*
+ * For the 8xx processors, all of them report the same PVR family for
+ * the PowerPC core. The various versions of these processors must be
+ * differentiated by the version number in the Communication Processor
+ * Module (CPM).
+ */
+#define PVR_821		0x00500000
+#define PVR_823		PVR_821
+#define PVR_850		PVR_821
+#define PVR_860		PVR_821
+#define PVR_8240	0x00810100
+#define PVR_8245	0x80811014
+#define PVR_8260	PVR_8240
+
+/* 64-bit processors */
+/* XXX the prefix should be PVR_, we'll do a global sweep to fix it one day */
+#define PV_NORTHSTAR	0x0033
+#define PV_PULSAR	0x0034
+#define PV_POWER4	0x0035
+#define PV_ICESTAR	0x0036
+#define PV_SSTAR	0x0037
+#define PV_POWER4p	0x0038
+#define PV_970		0x0039
+#define PV_POWER5	0x003A
+#define PV_POWER5p	0x003B
+#define PV_970FX	0x003C
+#define PV_630		0x0040
+#define PV_630p	0x0041
+#define PV_970MP	0x0044
+#define PV_970GX	0x0045
+#define PV_BE		0x0070
+#define PV_PA6T		0x0090
+
+/* Macros for setting and retrieving special purpose registers */
+#ifndef __ASSEMBLY__
+#define mfmsr()		({unsigned long rval; \
+			asm volatile("mfmsr %0" : "=r" (rval)); rval;})
+#ifdef CONFIG_PPC64
+#define __mtmsrd(v, l)	asm volatile("mtmsrd %0," __stringify(l) \
+				     : : "r" (v))
+#define mtmsrd(v)	__mtmsrd((v), 0)
+#define mtmsr(v)	mtmsrd(v)
+#else
+#define mtmsr(v)	asm volatile("mtmsr %0" : : "r" (v))
+#endif
+
+#define mfspr(rn)	({unsigned long rval; \
+			asm volatile("mfspr %0," __stringify(rn) \
+				: "=r" (rval)); rval;})
+#define mtspr(rn, v)	asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v))
+
+#ifdef __powerpc64__
+#ifdef CONFIG_PPC_CELL
+#define mftb()		({unsigned long rval;				\
+			asm volatile(					\
+				"90:	mftb %0;\n"			\
+				"97:	cmpwi %0,0;\n"			\
+				"	beq- 90b;\n"			\
+				"99:\n"					\
+				".section __ftr_fixup,\"a\"\n"		\
+				".align 3\n"				\
+				"98:\n"					\
+				"	.llong %1\n"			\
+				"	.llong %1\n"			\
+				"	.llong 97b-98b\n"		\
+				"	.llong 99b-98b\n"		\
+				"	.llong 0\n"			\
+				"	.llong 0\n"			\
+				".previous"				\
+			: "=r" (rval) : "i" (CPU_FTR_CELL_TB_BUG)); rval;})
+#else
+#define mftb()		({unsigned long rval;	\
+			asm volatile("mftb %0" : "=r" (rval)); rval;})
+#endif /* !CONFIG_PPC_CELL */
+
+#else /* __powerpc64__ */
+
+#define mftbl()		({unsigned long rval;	\
+			asm volatile("mftbl %0" : "=r" (rval)); rval;})
+#define mftbu()		({unsigned long rval;	\
+			asm volatile("mftbu %0" : "=r" (rval)); rval;})
+#endif /* !__powerpc64__ */
+
+#define mttbl(v)	asm volatile("mttbl %0":: "r"(v))
+#define mttbu(v)	asm volatile("mttbu %0":: "r"(v))
+
+#ifdef CONFIG_PPC32
+#define mfsrin(v)	({unsigned int rval; \
+			asm volatile("mfsrin %0,%1" : "=r" (rval) : "r" (v)); \
+					rval;})
+#endif
+
+#define proc_trap()	asm volatile("trap")
+
+#ifdef CONFIG_PPC64
+
+extern void ppc64_runlatch_on(void);
+extern void ppc64_runlatch_off(void);
+
+extern unsigned long scom970_read(unsigned int address);
+extern void scom970_write(unsigned int address, unsigned long value);
+
+#else
+#define ppc64_runlatch_on()
+#define ppc64_runlatch_off()
+
+#endif /* CONFIG_PPC64 */
+
+#define __get_SP()	({unsigned long sp; \
+			asm volatile("mr %0,1": "=r" (sp)); sp;})
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_REG_H */
diff --git a/arch/powerpc/include/asm/reg_8xx.h b/arch/powerpc/include/asm/reg_8xx.h
new file mode 100644
index 000000000000..e8ea346b21d3
--- /dev/null
+++ b/arch/powerpc/include/asm/reg_8xx.h
@@ -0,0 +1,42 @@
+/*
+ * Contains register definitions common to PowerPC 8xx CPUs.  Notice
+ */
+#ifndef _ASM_POWERPC_REG_8xx_H
+#define _ASM_POWERPC_REG_8xx_H
+
+/* Cache control on the MPC8xx is provided through some additional
+ * special purpose registers.
+ */
+#define SPRN_IC_CST	560	/* Instruction cache control/status */
+#define SPRN_IC_ADR	561	/* Address needed for some commands */
+#define SPRN_IC_DAT	562	/* Read-only data register */
+#define SPRN_DC_CST	568	/* Data cache control/status */
+#define SPRN_DC_ADR	569	/* Address needed for some commands */
+#define SPRN_DC_DAT	570	/* Read-only data register */
+
+/* Commands.  Only the first few are available to the instruction cache.
+*/
+#define	IDC_ENABLE	0x02000000	/* Cache enable */
+#define IDC_DISABLE	0x04000000	/* Cache disable */
+#define IDC_LDLCK	0x06000000	/* Load and lock */
+#define IDC_UNLINE	0x08000000	/* Unlock line */
+#define IDC_UNALL	0x0a000000	/* Unlock all */
+#define IDC_INVALL	0x0c000000	/* Invalidate all */
+
+#define DC_FLINE	0x0e000000	/* Flush data cache line */
+#define DC_SFWT		0x01000000	/* Set forced writethrough mode */
+#define DC_CFWT		0x03000000	/* Clear forced writethrough mode */
+#define DC_SLES		0x05000000	/* Set little endian swap mode */
+#define DC_CLES		0x07000000	/* Clear little endian swap mode */
+
+/* Status.
+*/
+#define IDC_ENABLED	0x80000000	/* Cache is enabled */
+#define IDC_CERR1	0x00200000	/* Cache error 1 */
+#define IDC_CERR2	0x00100000	/* Cache error 2 */
+#define IDC_CERR3	0x00080000	/* Cache error 3 */
+
+#define DC_DFWT		0x40000000	/* Data cache is forced write through */
+#define DC_LES		0x20000000	/* Caches are little endian mode */
+
+#endif /* _ASM_POWERPC_REG_8xx_H */
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
new file mode 100644
index 000000000000..be980f4ee495
--- /dev/null
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -0,0 +1,501 @@
+/*
+ * Contains register definitions common to the Book E PowerPC
+ * specification.  Notice that while the IBM-40x series of CPUs
+ * are not true Book E PowerPCs, they borrowed a number of features
+ * before Book E was finalized, and are included here as well.  Unfortunatly,
+ * they sometimes used different locations than true Book E CPUs did.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_REG_BOOKE_H__
+#define __ASM_POWERPC_REG_BOOKE_H__
+
+/* Machine State Register (MSR) Fields */
+#define MSR_UCLE	(1<<26)	/* User-mode cache lock enable */
+#define MSR_SPE		(1<<25)	/* Enable SPE */
+#define MSR_DWE		(1<<10)	/* Debug Wait Enable */
+#define MSR_UBLE	(1<<10)	/* BTB lock enable (e500) */
+#define MSR_IS		MSR_IR	/* Instruction Space */
+#define MSR_DS		MSR_DR	/* Data Space */
+#define MSR_PMM		(1<<2)	/* Performance monitor mark bit */
+
+/* Default MSR for kernel mode. */
+#if defined (CONFIG_40x)
+#define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_IR|MSR_DR|MSR_CE)
+#elif defined(CONFIG_BOOKE)
+#define MSR_KERNEL	(MSR_ME|MSR_RI|MSR_CE)
+#endif
+
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_DECAR	0x036	/* Decrementer Auto Reload Register */
+#define SPRN_IVPR	0x03F	/* Interrupt Vector Prefix Register */
+#define SPRN_USPRG0	0x100	/* User Special Purpose Register General 0 */
+#define SPRN_SPRG4R	0x104	/* Special Purpose Register General 4 Read */
+#define SPRN_SPRG5R	0x105	/* Special Purpose Register General 5 Read */
+#define SPRN_SPRG6R	0x106	/* Special Purpose Register General 6 Read */
+#define SPRN_SPRG7R	0x107	/* Special Purpose Register General 7 Read */
+#define SPRN_SPRG4W	0x114	/* Special Purpose Register General 4 Write */
+#define SPRN_SPRG5W	0x115	/* Special Purpose Register General 5 Write */
+#define SPRN_SPRG6W	0x116	/* Special Purpose Register General 6 Write */
+#define SPRN_SPRG7W	0x117	/* Special Purpose Register General 7 Write */
+#define SPRN_DBCR2	0x136	/* Debug Control Register 2 */
+#define SPRN_IAC3	0x13A	/* Instruction Address Compare 3 */
+#define SPRN_IAC4	0x13B	/* Instruction Address Compare 4 */
+#define SPRN_DVC1	0x13E	/* Data Value Compare Register 1 */
+#define SPRN_DVC2	0x13F	/* Data Value Compare Register 2 */
+#define SPRN_IVOR0	0x190	/* Interrupt Vector Offset Register 0 */
+#define SPRN_IVOR1	0x191	/* Interrupt Vector Offset Register 1 */
+#define SPRN_IVOR2	0x192	/* Interrupt Vector Offset Register 2 */
+#define SPRN_IVOR3	0x193	/* Interrupt Vector Offset Register 3 */
+#define SPRN_IVOR4	0x194	/* Interrupt Vector Offset Register 4 */
+#define SPRN_IVOR5	0x195	/* Interrupt Vector Offset Register 5 */
+#define SPRN_IVOR6	0x196	/* Interrupt Vector Offset Register 6 */
+#define SPRN_IVOR7	0x197	/* Interrupt Vector Offset Register 7 */
+#define SPRN_IVOR8	0x198	/* Interrupt Vector Offset Register 8 */
+#define SPRN_IVOR9	0x199	/* Interrupt Vector Offset Register 9 */
+#define SPRN_IVOR10	0x19A	/* Interrupt Vector Offset Register 10 */
+#define SPRN_IVOR11	0x19B	/* Interrupt Vector Offset Register 11 */
+#define SPRN_IVOR12	0x19C	/* Interrupt Vector Offset Register 12 */
+#define SPRN_IVOR13	0x19D	/* Interrupt Vector Offset Register 13 */
+#define SPRN_IVOR14	0x19E	/* Interrupt Vector Offset Register 14 */
+#define SPRN_IVOR15	0x19F	/* Interrupt Vector Offset Register 15 */
+#define SPRN_SPEFSCR	0x200	/* SPE & Embedded FP Status & Control */
+#define SPRN_BBEAR	0x201	/* Branch Buffer Entry Address Register */
+#define SPRN_BBTAR	0x202	/* Branch Buffer Target Address Register */
+#define SPRN_L1CFG0	0x203	/* L1 Cache Configure Register 0 */
+#define SPRN_L1CFG1	0x204	/* L1 Cache Configure Register 1 */
+#define SPRN_ATB	0x20E	/* Alternate Time Base */
+#define SPRN_ATBL	0x20E	/* Alternate Time Base Lower */
+#define SPRN_ATBU	0x20F	/* Alternate Time Base Upper */
+#define SPRN_IVOR32	0x210	/* Interrupt Vector Offset Register 32 */
+#define SPRN_IVOR33	0x211	/* Interrupt Vector Offset Register 33 */
+#define SPRN_IVOR34	0x212	/* Interrupt Vector Offset Register 34 */
+#define SPRN_IVOR35	0x213	/* Interrupt Vector Offset Register 35 */
+#define SPRN_IVOR36	0x214	/* Interrupt Vector Offset Register 36 */
+#define SPRN_IVOR37	0x215	/* Interrupt Vector Offset Register 37 */
+#define SPRN_MCSRR0	0x23A	/* Machine Check Save and Restore Register 0 */
+#define SPRN_MCSRR1	0x23B	/* Machine Check Save and Restore Register 1 */
+#define SPRN_MCSR	0x23C	/* Machine Check Status Register */
+#define SPRN_MCAR	0x23D	/* Machine Check Address Register */
+#define SPRN_DSRR0	0x23E	/* Debug Save and Restore Register 0 */
+#define SPRN_DSRR1	0x23F	/* Debug Save and Restore Register 1 */
+#define SPRN_SPRG8	0x25C	/* Special Purpose Register General 8 */
+#define SPRN_SPRG9	0x25D	/* Special Purpose Register General 9 */
+#define SPRN_L1CSR2	0x25E	/* L1 Cache Control and Status Register 2 */
+#define SPRN_MAS0	0x270	/* MMU Assist Register 0 */
+#define SPRN_MAS1	0x271	/* MMU Assist Register 1 */
+#define SPRN_MAS2	0x272	/* MMU Assist Register 2 */
+#define SPRN_MAS3	0x273	/* MMU Assist Register 3 */
+#define SPRN_MAS4	0x274	/* MMU Assist Register 4 */
+#define SPRN_MAS5	0x275	/* MMU Assist Register 5 */
+#define SPRN_MAS6	0x276	/* MMU Assist Register 6 */
+#define SPRN_PID1	0x279	/* Process ID Register 1 */
+#define SPRN_PID2	0x27A	/* Process ID Register 2 */
+#define SPRN_TLB0CFG	0x2B0	/* TLB 0 Config Register */
+#define SPRN_TLB1CFG	0x2B1	/* TLB 1 Config Register */
+#define SPRN_EPR	0x2BE	/* External Proxy Register */
+#define SPRN_CCR1	0x378	/* Core Configuration Register 1 */
+#define SPRN_ZPR	0x3B0	/* Zone Protection Register (40x) */
+#define SPRN_MAS7	0x3B0	/* MMU Assist Register 7 */
+#define SPRN_MMUCR	0x3B2	/* MMU Control Register */
+#define SPRN_CCR0	0x3B3	/* Core Configuration Register 0 */
+#define SPRN_EPLC	0x3B3	/* External Process ID Load Context */
+#define SPRN_EPSC	0x3B4	/* External Process ID Store Context */
+#define SPRN_SGR	0x3B9	/* Storage Guarded Register */
+#define SPRN_DCWR	0x3BA	/* Data Cache Write-thru Register */
+#define SPRN_SLER	0x3BB	/* Little-endian real mode */
+#define SPRN_SU0R	0x3BC	/* "User 0" real mode (40x) */
+#define SPRN_DCMP	0x3D1	/* Data TLB Compare Register */
+#define SPRN_ICDBDR	0x3D3	/* Instruction Cache Debug Data Register */
+#define SPRN_EVPR	0x3D6	/* Exception Vector Prefix Register */
+#define SPRN_L1CSR0	0x3F2	/* L1 Cache Control and Status Register 0 */
+#define SPRN_L1CSR1	0x3F3	/* L1 Cache Control and Status Register 1 */
+#define SPRN_PIT	0x3DB	/* Programmable Interval Timer */
+#define SPRN_BUCSR	0x3F5	/* Branch Unit Control and Status */
+#define SPRN_L2CSR0	0x3F9	/* L2 Data Cache Control and Status Register 0 */
+#define SPRN_L2CSR1	0x3FA	/* L2 Data Cache Control and Status Register 1 */
+#define SPRN_DCCR	0x3FA	/* Data Cache Cacheability Register */
+#define SPRN_ICCR	0x3FB	/* Instruction Cache Cacheability Register */
+#define SPRN_SVR	0x3FF	/* System Version Register */
+
+/*
+ * SPRs which have conflicting definitions on true Book E versus classic,
+ * or IBM 40x.
+ */
+#ifdef CONFIG_BOOKE
+#define SPRN_PID	0x030	/* Process ID */
+#define SPRN_PID0	SPRN_PID/* Process ID Register 0 */
+#define SPRN_CSRR0	0x03A	/* Critical Save and Restore Register 0 */
+#define SPRN_CSRR1	0x03B	/* Critical Save and Restore Register 1 */
+#define SPRN_DEAR	0x03D	/* Data Error Address Register */
+#define SPRN_ESR	0x03E	/* Exception Syndrome Register */
+#define SPRN_PIR	0x11E	/* Processor Identification Register */
+#define SPRN_DBSR	0x130	/* Debug Status Register */
+#define SPRN_DBCR0	0x134	/* Debug Control Register 0 */
+#define SPRN_DBCR1	0x135	/* Debug Control Register 1 */
+#define SPRN_IAC1	0x138	/* Instruction Address Compare 1 */
+#define SPRN_IAC2	0x139	/* Instruction Address Compare 2 */
+#define SPRN_DAC1	0x13C	/* Data Address Compare 1 */
+#define SPRN_DAC2	0x13D	/* Data Address Compare 2 */
+#define SPRN_TSR	0x150	/* Timer Status Register */
+#define SPRN_TCR	0x154	/* Timer Control Register */
+#endif /* Book E */
+#ifdef CONFIG_40x
+#define SPRN_PID	0x3B1	/* Process ID */
+#define SPRN_DBCR1	0x3BD	/* Debug Control Register 1 */		
+#define SPRN_ESR	0x3D4	/* Exception Syndrome Register */
+#define SPRN_DEAR	0x3D5	/* Data Error Address Register */
+#define SPRN_TSR	0x3D8	/* Timer Status Register */
+#define SPRN_TCR	0x3DA	/* Timer Control Register */
+#define SPRN_SRR2	0x3DE	/* Save/Restore Register 2 */
+#define SPRN_SRR3	0x3DF	/* Save/Restore Register 3 */
+#define SPRN_DBSR	0x3F0	/* Debug Status Register */		
+#define SPRN_DBCR0	0x3F2	/* Debug Control Register 0 */
+#define SPRN_DAC1	0x3F6	/* Data Address Compare 1 */
+#define SPRN_DAC2	0x3F7	/* Data Address Compare 2 */
+#define SPRN_CSRR0	SPRN_SRR2 /* Critical Save and Restore Register 0 */
+#define SPRN_CSRR1	SPRN_SRR3 /* Critical Save and Restore Register 1 */
+#endif
+
+/* Bit definitions for CCR1. */
+#define	CCR1_DPC	0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
+#define	CCR1_TCS	0x00000080 /* Timer Clock Select */
+
+/* Bit definitions for the MCSR. */
+#define MCSR_MCS	0x80000000 /* Machine Check Summary */
+#define MCSR_IB		0x40000000 /* Instruction PLB Error */
+#define MCSR_DRB	0x20000000 /* Data Read PLB Error */
+#define MCSR_DWB	0x10000000 /* Data Write PLB Error */
+#define MCSR_TLBP	0x08000000 /* TLB Parity Error */
+#define MCSR_ICP	0x04000000 /* I-Cache Parity Error */
+#define MCSR_DCSP	0x02000000 /* D-Cache Search Parity Error */
+#define MCSR_DCFP	0x01000000 /* D-Cache Flush Parity Error */
+#define MCSR_IMPE	0x00800000 /* Imprecise Machine Check Exception */
+
+#ifdef CONFIG_E500
+#define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
+#define MCSR_ICPERR 	0x40000000UL /* I-Cache Parity Error */
+#define MCSR_DCP_PERR 	0x20000000UL /* D-Cache Push Parity Error */
+#define MCSR_DCPERR 	0x10000000UL /* D-Cache Parity Error */
+#define MCSR_BUS_IAERR 	0x00000080UL /* Instruction Address Error */
+#define MCSR_BUS_RAERR 	0x00000040UL /* Read Address Error */
+#define MCSR_BUS_WAERR 	0x00000020UL /* Write Address Error */
+#define MCSR_BUS_IBERR 	0x00000010UL /* Instruction Data Error */
+#define MCSR_BUS_RBERR 	0x00000008UL /* Read Data Bus Error */
+#define MCSR_BUS_WBERR 	0x00000004UL /* Write Data Bus Error */
+#define MCSR_BUS_IPERR 	0x00000002UL /* Instruction parity Error */
+#define MCSR_BUS_RPERR 	0x00000001UL /* Read parity Error */
+
+/* e500 parts may set unused bits in MCSR; mask these off */
+#define MCSR_MASK	(MCSR_MCP | MCSR_ICPERR | MCSR_DCP_PERR | \
+			MCSR_DCPERR | MCSR_BUS_IAERR | MCSR_BUS_RAERR | \
+			MCSR_BUS_WAERR | MCSR_BUS_IBERR | MCSR_BUS_RBERR | \
+			MCSR_BUS_WBERR | MCSR_BUS_IPERR | MCSR_BUS_RPERR)
+#endif
+#ifdef CONFIG_E200
+#define MCSR_MCP 	0x80000000UL /* Machine Check Input Pin */
+#define MCSR_CP_PERR 	0x20000000UL /* Cache Push Parity Error */
+#define MCSR_CPERR 	0x10000000UL /* Cache Parity Error */
+#define MCSR_EXCP_ERR 	0x08000000UL /* ISI, ITLB, or Bus Error on 1st insn
+					fetch for an exception handler */
+#define MCSR_BUS_IRERR 	0x00000010UL /* Read Bus Error on instruction fetch*/
+#define MCSR_BUS_DRERR 	0x00000008UL /* Read Bus Error on data load */
+#define MCSR_BUS_WRERR 	0x00000004UL /* Write Bus Error on buffered
+					store or cache line push */
+
+/* e200 parts may set unused bits in MCSR; mask these off */
+#define MCSR_MASK	(MCSR_MCP | MCSR_CP_PERR | MCSR_CPERR | \
+			MCSR_EXCP_ERR | MCSR_BUS_IRERR | MCSR_BUS_DRERR | \
+			MCSR_BUS_WRERR)
+#endif
+
+/* Bit definitions for the DBSR. */
+/*
+ * DBSR bits which have conflicting definitions on true Book E versus IBM 40x.
+ */
+#ifdef CONFIG_BOOKE
+#define DBSR_IC		0x08000000	/* Instruction Completion */
+#define DBSR_BT		0x04000000	/* Branch Taken */
+#define DBSR_IRPT	0x02000000	/* Exception Debug Event */
+#define DBSR_TIE	0x01000000	/* Trap Instruction Event */
+#define DBSR_IAC1	0x00800000	/* Instr Address Compare 1 Event */
+#define DBSR_IAC2	0x00400000	/* Instr Address Compare 2 Event */
+#define DBSR_IAC3	0x00200000	/* Instr Address Compare 3 Event */
+#define DBSR_IAC4	0x00100000	/* Instr Address Compare 4 Event */
+#define DBSR_DAC1R	0x00080000	/* Data Addr Compare 1 Read Event */
+#define DBSR_DAC1W	0x00040000	/* Data Addr Compare 1 Write Event */
+#define DBSR_DAC2R	0x00020000	/* Data Addr Compare 2 Read Event */
+#define DBSR_DAC2W	0x00010000	/* Data Addr Compare 2 Write Event */
+#define DBSR_RET	0x00008000	/* Return Debug Event */
+#define DBSR_CIRPT	0x00000040	/* Critical Interrupt Taken Event */
+#define DBSR_CRET	0x00000020	/* Critical Return Debug Event */
+#endif
+#ifdef CONFIG_40x
+#define DBSR_IC		0x80000000	/* Instruction Completion */
+#define DBSR_BT		0x40000000	/* Branch taken */
+#define DBSR_IRPT	0x20000000	/* Exception Debug Event */
+#define DBSR_TIE	0x10000000	/* Trap Instruction debug Event */
+#define DBSR_IAC1	0x04000000	/* Instruction Address Compare 1 Event */
+#define DBSR_IAC2	0x02000000	/* Instruction Address Compare 2 Event */
+#define DBSR_IAC3	0x00080000	/* Instruction Address Compare 3 Event */
+#define DBSR_IAC4	0x00040000	/* Instruction Address Compare 4 Event */
+#define DBSR_DAC1R	0x01000000	/* Data Address Compare 1 Read Event */
+#define DBSR_DAC1W	0x00800000	/* Data Address Compare 1 Write Event */
+#define DBSR_DAC2R	0x00400000	/* Data Address Compare 2 Read Event */
+#define DBSR_DAC2W	0x00200000	/* Data Address Compare 2 Write Event */
+#endif
+
+/* Bit definitions related to the ESR. */
+#define ESR_MCI		0x80000000	/* Machine Check - Instruction */
+#define ESR_IMCP	0x80000000	/* Instr. Machine Check - Protection */
+#define ESR_IMCN	0x40000000	/* Instr. Machine Check - Non-config */
+#define ESR_IMCB	0x20000000	/* Instr. Machine Check - Bus error */
+#define ESR_IMCT	0x10000000	/* Instr. Machine Check - Timeout */
+#define ESR_PIL		0x08000000	/* Program Exception - Illegal */
+#define ESR_PPR		0x04000000	/* Program Exception - Privileged */
+#define ESR_PTR		0x02000000	/* Program Exception - Trap */
+#define ESR_FP		0x01000000	/* Floating Point Operation */
+#define ESR_DST		0x00800000	/* Storage Exception - Data miss */
+#define ESR_DIZ		0x00400000	/* Storage Exception - Zone fault */
+#define ESR_ST		0x00800000	/* Store Operation */
+#define ESR_DLK		0x00200000	/* Data Cache Locking */
+#define ESR_ILK		0x00100000	/* Instr. Cache Locking */
+#define ESR_PUO		0x00040000	/* Unimplemented Operation exception */
+#define ESR_BO		0x00020000	/* Byte Ordering */
+
+/* Bit definitions related to the DBCR0. */
+#if defined(CONFIG_40x)
+#define DBCR0_EDM	0x80000000	/* External Debug Mode */
+#define DBCR0_IDM	0x40000000	/* Internal Debug Mode */
+#define DBCR0_RST	0x30000000	/* all the bits in the RST field */
+#define DBCR0_RST_SYSTEM 0x30000000	/* System Reset */
+#define DBCR0_RST_CHIP	0x20000000	/* Chip Reset */
+#define DBCR0_RST_CORE	0x10000000	/* Core Reset */
+#define DBCR0_RST_NONE	0x00000000	/* No Reset */
+#define DBCR0_IC	0x08000000	/* Instruction Completion */
+#define DBCR0_ICMP	DBCR0_IC
+#define DBCR0_BT	0x04000000	/* Branch Taken */
+#define DBCR0_BRT	DBCR0_BT
+#define DBCR0_EDE	0x02000000	/* Exception Debug Event */
+#define DBCR0_IRPT	DBCR0_EDE
+#define DBCR0_TDE	0x01000000	/* TRAP Debug Event */
+#define DBCR0_IA1	0x00800000	/* Instr Addr compare 1 enable */
+#define DBCR0_IAC1	DBCR0_IA1
+#define DBCR0_IA2	0x00400000	/* Instr Addr compare 2 enable */
+#define DBCR0_IAC2	DBCR0_IA2
+#define DBCR0_IA12	0x00200000	/* Instr Addr 1-2 range enable */
+#define DBCR0_IA12X	0x00100000	/* Instr Addr 1-2 range eXclusive */
+#define DBCR0_IA3	0x00080000	/* Instr Addr compare 3 enable */
+#define DBCR0_IAC3	DBCR0_IA3
+#define DBCR0_IA4	0x00040000	/* Instr Addr compare 4 enable */
+#define DBCR0_IAC4	DBCR0_IA4
+#define DBCR0_IA34	0x00020000	/* Instr Addr 3-4 range Enable */
+#define DBCR0_IA34X	0x00010000	/* Instr Addr 3-4 range eXclusive */
+#define DBCR0_IA12T	0x00008000	/* Instr Addr 1-2 range Toggle */
+#define DBCR0_IA34T	0x00004000	/* Instr Addr 3-4 range Toggle */
+#define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
+#elif defined(CONFIG_BOOKE)
+#define DBCR0_EDM	0x80000000	/* External Debug Mode */
+#define DBCR0_IDM	0x40000000	/* Internal Debug Mode */
+#define DBCR0_RST	0x30000000	/* all the bits in the RST field */
+/* DBCR0_RST_* is 44x specific and not followed in fsl booke */
+#define DBCR0_RST_SYSTEM 0x30000000	/* System Reset */
+#define DBCR0_RST_CHIP	0x20000000	/* Chip Reset */
+#define DBCR0_RST_CORE	0x10000000	/* Core Reset */
+#define DBCR0_RST_NONE	0x00000000	/* No Reset */
+#define DBCR0_ICMP	0x08000000	/* Instruction Completion */
+#define DBCR0_IC	DBCR0_ICMP
+#define DBCR0_BRT	0x04000000	/* Branch Taken */
+#define DBCR0_BT	DBCR0_BRT
+#define DBCR0_IRPT	0x02000000	/* Exception Debug Event */
+#define DBCR0_TDE	0x01000000	/* TRAP Debug Event */
+#define DBCR0_TIE	DBCR0_TDE
+#define DBCR0_IAC1	0x00800000	/* Instr Addr compare 1 enable */
+#define DBCR0_IAC2	0x00400000	/* Instr Addr compare 2 enable */
+#define DBCR0_IAC3	0x00200000	/* Instr Addr compare 3 enable */
+#define DBCR0_IAC4	0x00100000	/* Instr Addr compare 4 enable */
+#define DBCR0_DAC1R	0x00080000	/* DAC 1 Read enable */
+#define DBCR0_DAC1W	0x00040000	/* DAC 1 Write enable */
+#define DBCR0_DAC2R	0x00020000	/* DAC 2 Read enable */
+#define DBCR0_DAC2W	0x00010000	/* DAC 2 Write enable */
+#define DBCR0_RET	0x00008000	/* Return Debug Event */
+#define DBCR0_CIRPT	0x00000040	/* Critical Interrupt Taken Event */
+#define DBCR0_CRET	0x00000020	/* Critical Return Debug Event */
+#define DBCR0_FT	0x00000001	/* Freeze Timers on debug event */
+
+/* Bit definitions related to the DBCR1. */
+#define DBCR1_IAC12M	0x00800000	/* Instr Addr 1-2 range enable */
+#define DBCR1_IAC12MX	0x00C00000	/* Instr Addr 1-2 range eXclusive */
+#define DBCR1_IAC12AT	0x00010000	/* Instr Addr 1-2 range Toggle */
+#define DBCR1_IAC34M	0x00000080	/* Instr Addr 3-4 range enable */
+#define DBCR1_IAC34MX	0x000000C0	/* Instr Addr 3-4 range eXclusive */
+#define DBCR1_IAC34AT	0x00000001	/* Instr Addr 3-4 range Toggle */
+
+/* Bit definitions related to the DBCR2. */
+#define DBCR2_DAC12M	0x00800000	/* DAC 1-2 range enable */
+#define DBCR2_DAC12MX	0x00C00000	/* DAC 1-2 range eXclusive */
+#define DBCR2_DAC12A	0x00200000	/* DAC 1-2 Asynchronous */
+#endif
+
+/* Bit definitions related to the TCR. */
+#define TCR_WP(x)	(((x)&0x3)<<30)	/* WDT Period */
+#define TCR_WP_MASK	TCR_WP(3)
+#define WP_2_17		0		/* 2^17 clocks */
+#define WP_2_21		1		/* 2^21 clocks */
+#define WP_2_25		2		/* 2^25 clocks */
+#define WP_2_29		3		/* 2^29 clocks */
+#define TCR_WRC(x)	(((x)&0x3)<<28)	/* WDT Reset Control */
+#define TCR_WRC_MASK	TCR_WRC(3)
+#define WRC_NONE	0		/* No reset will occur */
+#define WRC_CORE	1		/* Core reset will occur */
+#define WRC_CHIP	2		/* Chip reset will occur */
+#define WRC_SYSTEM	3		/* System reset will occur */
+#define TCR_WIE		0x08000000	/* WDT Interrupt Enable */
+#define TCR_PIE		0x04000000	/* PIT Interrupt Enable */
+#define TCR_DIE		TCR_PIE		/* DEC Interrupt Enable */
+#define TCR_FP(x)	(((x)&0x3)<<24)	/* FIT Period */
+#define TCR_FP_MASK	TCR_FP(3)
+#define FP_2_9		0		/* 2^9 clocks */
+#define FP_2_13		1		/* 2^13 clocks */
+#define FP_2_17		2		/* 2^17 clocks */
+#define FP_2_21		3		/* 2^21 clocks */
+#define TCR_FIE		0x00800000	/* FIT Interrupt Enable */
+#define TCR_ARE		0x00400000	/* Auto Reload Enable */
+
+/* Bit definitions for the TSR. */
+#define TSR_ENW		0x80000000	/* Enable Next Watchdog */
+#define TSR_WIS		0x40000000	/* WDT Interrupt Status */
+#define TSR_WRS(x)	(((x)&0x3)<<28)	/* WDT Reset Status */
+#define WRS_NONE	0		/* No WDT reset occurred */
+#define WRS_CORE	1		/* WDT forced core reset */
+#define WRS_CHIP	2		/* WDT forced chip reset */
+#define WRS_SYSTEM	3		/* WDT forced system reset */
+#define TSR_PIS		0x08000000	/* PIT Interrupt Status */
+#define TSR_DIS		TSR_PIS		/* DEC Interrupt Status */
+#define TSR_FIS		0x04000000	/* FIT Interrupt Status */
+
+/* Bit definitions for the DCCR. */
+#define DCCR_NOCACHE	0		/* Noncacheable */
+#define DCCR_CACHE	1		/* Cacheable */
+
+/* Bit definitions for DCWR. */
+#define DCWR_COPY	0		/* Copy-back */
+#define DCWR_WRITE	1		/* Write-through */
+
+/* Bit definitions for ICCR. */
+#define ICCR_NOCACHE	0		/* Noncacheable */
+#define ICCR_CACHE	1		/* Cacheable */
+
+/* Bit definitions for L1CSR0. */
+#define L1CSR0_CLFC	0x00000100	/* Cache Lock Bits Flash Clear */
+#define L1CSR0_DCFI	0x00000002	/* Data Cache Flash Invalidate */
+#define L1CSR0_CFI	0x00000002	/* Cache Flash Invalidate */
+#define L1CSR0_DCE	0x00000001	/* Data Cache Enable */
+
+/* Bit definitions for L1CSR1. */
+#define L1CSR1_ICLFR	0x00000100	/* Instr Cache Lock Bits Flash Reset */
+#define L1CSR1_ICFI	0x00000002	/* Instr Cache Flash Invalidate */
+#define L1CSR1_ICE	0x00000001	/* Instr Cache Enable */
+
+/* Bit definitions for L2CSR0. */
+#define L2CSR0_L2E	0x80000000	/* L2 Cache Enable */
+#define L2CSR0_L2PE	0x40000000	/* L2 Cache Parity/ECC Enable */
+#define L2CSR0_L2WP	0x1c000000	/* L2 I/D Way Partioning */
+#define L2CSR0_L2CM	0x03000000	/* L2 Cache Coherency Mode */
+#define L2CSR0_L2FI	0x00200000	/* L2 Cache Flash Invalidate */
+#define L2CSR0_L2IO	0x00100000	/* L2 Cache Instruction Only */
+#define L2CSR0_L2DO	0x00010000	/* L2 Cache Data Only */
+#define L2CSR0_L2REP	0x00003000	/* L2 Line Replacement Algo */
+#define L2CSR0_L2FL	0x00000800	/* L2 Cache Flush */
+#define L2CSR0_L2LFC	0x00000400	/* L2 Cache Lock Flash Clear */
+#define L2CSR0_L2LOA	0x00000080	/* L2 Cache Lock Overflow Allocate */
+#define L2CSR0_L2LO	0x00000020	/* L2 Cache Lock Overflow */
+
+/* Bit definitions for SGR. */
+#define SGR_NORMAL	0		/* Speculative fetching allowed. */
+#define SGR_GUARDED	1		/* Speculative fetching disallowed. */
+
+/* Bit definitions for SPEFSCR. */
+#define SPEFSCR_SOVH	0x80000000	/* Summary integer overflow high */
+#define SPEFSCR_OVH	0x40000000	/* Integer overflow high */
+#define SPEFSCR_FGH	0x20000000	/* Embedded FP guard bit high */
+#define SPEFSCR_FXH	0x10000000	/* Embedded FP sticky bit high */
+#define SPEFSCR_FINVH	0x08000000	/* Embedded FP invalid operation high */
+#define SPEFSCR_FDBZH	0x04000000	/* Embedded FP div by zero high */
+#define SPEFSCR_FUNFH	0x02000000	/* Embedded FP underflow high */
+#define SPEFSCR_FOVFH	0x01000000	/* Embedded FP overflow high */
+#define SPEFSCR_FINXS	0x00200000	/* Embedded FP inexact sticky */
+#define SPEFSCR_FINVS	0x00100000	/* Embedded FP invalid op. sticky */
+#define SPEFSCR_FDBZS	0x00080000	/* Embedded FP div by zero sticky */
+#define SPEFSCR_FUNFS	0x00040000	/* Embedded FP underflow sticky */
+#define SPEFSCR_FOVFS	0x00020000	/* Embedded FP overflow sticky */
+#define SPEFSCR_MODE	0x00010000	/* Embedded FP mode */
+#define SPEFSCR_SOV	0x00008000	/* Integer summary overflow */
+#define SPEFSCR_OV	0x00004000	/* Integer overflow */
+#define SPEFSCR_FG	0x00002000	/* Embedded FP guard bit */
+#define SPEFSCR_FX	0x00001000	/* Embedded FP sticky bit */
+#define SPEFSCR_FINV	0x00000800	/* Embedded FP invalid operation */
+#define SPEFSCR_FDBZ	0x00000400	/* Embedded FP div by zero */
+#define SPEFSCR_FUNF	0x00000200	/* Embedded FP underflow */
+#define SPEFSCR_FOVF	0x00000100	/* Embedded FP overflow */
+#define SPEFSCR_FINXE	0x00000040	/* Embedded FP inexact enable */
+#define SPEFSCR_FINVE	0x00000020	/* Embedded FP invalid op. enable */
+#define SPEFSCR_FDBZE	0x00000010	/* Embedded FP div by zero enable */
+#define SPEFSCR_FUNFE	0x00000008	/* Embedded FP underflow enable */
+#define SPEFSCR_FOVFE	0x00000004	/* Embedded FP overflow enable */
+#define SPEFSCR_FRMC 	0x00000003	/* Embedded FP rounding mode control */
+
+/*
+ * The IBM-403 is an even more odd special case, as it is much
+ * older than the IBM-405 series.  We put these down here incase someone
+ * wishes to support these machines again.
+ */
+#ifdef CONFIG_403GCX
+/* Special Purpose Registers (SPRNs)*/
+#define SPRN_TBHU	0x3CC	/* Time Base High User-mode */
+#define SPRN_TBLU	0x3CD	/* Time Base Low User-mode */
+#define SPRN_CDBCR	0x3D7	/* Cache Debug Control Register */
+#define SPRN_TBHI	0x3DC	/* Time Base High */
+#define SPRN_TBLO	0x3DD	/* Time Base Low */
+#define SPRN_DBCR	0x3F2	/* Debug Control Regsiter */
+#define SPRN_PBL1	0x3FC	/* Protection Bound Lower 1 */
+#define SPRN_PBL2	0x3FE	/* Protection Bound Lower 2 */
+#define SPRN_PBU1	0x3FD	/* Protection Bound Upper 1 */
+#define SPRN_PBU2	0x3FF	/* Protection Bound Upper 2 */
+
+
+/* Bit definitions for the DBCR. */
+#define DBCR_EDM	DBCR0_EDM
+#define DBCR_IDM	DBCR0_IDM
+#define DBCR_RST(x)	(((x) & 0x3) << 28)
+#define DBCR_RST_NONE	0
+#define DBCR_RST_CORE	1
+#define DBCR_RST_CHIP	2
+#define DBCR_RST_SYSTEM	3
+#define DBCR_IC		DBCR0_IC	/* Instruction Completion Debug Evnt */
+#define DBCR_BT		DBCR0_BT	/* Branch Taken Debug Event */
+#define DBCR_EDE	DBCR0_EDE	/* Exception Debug Event */
+#define DBCR_TDE	DBCR0_TDE	/* TRAP Debug Event */
+#define DBCR_FER	0x00F80000	/* First Events Remaining Mask */
+#define DBCR_FT		0x00040000	/* Freeze Timers on Debug Event */
+#define DBCR_IA1	0x00020000	/* Instr. Addr. Compare 1 Enable */
+#define DBCR_IA2	0x00010000	/* Instr. Addr. Compare 2 Enable */
+#define DBCR_D1R	0x00008000	/* Data Addr. Compare 1 Read Enable */
+#define DBCR_D1W	0x00004000	/* Data Addr. Compare 1 Write Enable */
+#define DBCR_D1S(x)	(((x) & 0x3) << 12)	/* Data Adrr. Compare 1 Size */
+#define DAC_BYTE	0
+#define DAC_HALF	1
+#define DAC_WORD	2
+#define DAC_QUAD	3
+#define DBCR_D2R	0x00000800	/* Data Addr. Compare 2 Read Enable */
+#define DBCR_D2W	0x00000400	/* Data Addr. Compare 2 Write Enable */
+#define DBCR_D2S(x)	(((x) & 0x3) << 8)	/* Data Addr. Compare 2 Size */
+#define DBCR_SBT	0x00000040	/* Second Branch Taken Debug Event */
+#define DBCR_SED	0x00000020	/* Second Exception Debug Event */
+#define DBCR_STD	0x00000010	/* Second Trap Debug Event */
+#define DBCR_SIA	0x00000008	/* Second IAC Enable */
+#define DBCR_SDA	0x00000004	/* Second DAC Enable */
+#define DBCR_JOI	0x00000002	/* JTAG Serial Outbound Int. Enable */
+#define DBCR_JII	0x00000001	/* JTAG Serial Inbound Int. Enable */
+#endif /* 403GCX */
+#endif /* __ASM_POWERPC_REG_BOOKE_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
new file mode 100644
index 000000000000..1e180a594589
--- /dev/null
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
@@ -0,0 +1,72 @@
+/*
+ * Contains register definitions for the Freescale Embedded Performance
+ * Monitor.
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_POWERPC_REG_FSL_EMB_H__
+#define __ASM_POWERPC_REG_FSL_EMB_H__
+
+#ifndef __ASSEMBLY__
+/* Performance Monitor Registers */
+#define mfpmr(rn)	({unsigned int rval; \
+			asm volatile("mfpmr %0," __stringify(rn) \
+				     : "=r" (rval)); rval;})
+#define mtpmr(rn, v)	asm volatile("mtpmr " __stringify(rn) ",%0" : : "r" (v))
+#endif /* __ASSEMBLY__ */
+
+/* Freescale Book E Performance Monitor APU Registers */
+#define PMRN_PMC0	0x010	/* Performance Monitor Counter 0 */
+#define PMRN_PMC1	0x011	/* Performance Monitor Counter 1 */
+#define PMRN_PMC2	0x012	/* Performance Monitor Counter 1 */
+#define PMRN_PMC3	0x013	/* Performance Monitor Counter 1 */
+#define PMRN_PMLCA0	0x090	/* PM Local Control A0 */
+#define PMRN_PMLCA1	0x091	/* PM Local Control A1 */
+#define PMRN_PMLCA2	0x092	/* PM Local Control A2 */
+#define PMRN_PMLCA3	0x093	/* PM Local Control A3 */
+
+#define PMLCA_FC	0x80000000	/* Freeze Counter */
+#define PMLCA_FCS	0x40000000	/* Freeze in Supervisor */
+#define PMLCA_FCU	0x20000000	/* Freeze in User */
+#define PMLCA_FCM1	0x10000000	/* Freeze when PMM==1 */
+#define PMLCA_FCM0	0x08000000	/* Freeze when PMM==0 */
+#define PMLCA_CE	0x04000000	/* Condition Enable */
+
+#define PMLCA_EVENT_MASK 0x007f0000	/* Event field */
+#define PMLCA_EVENT_SHIFT	16
+
+#define PMRN_PMLCB0	0x110	/* PM Local Control B0 */
+#define PMRN_PMLCB1	0x111	/* PM Local Control B1 */
+#define PMRN_PMLCB2	0x112	/* PM Local Control B2 */
+#define PMRN_PMLCB3	0x113	/* PM Local Control B3 */
+
+#define PMLCB_THRESHMUL_MASK	0x0700	/* Threshhold Multiple Field */
+#define PMLCB_THRESHMUL_SHIFT	8
+
+#define PMLCB_THRESHOLD_MASK	0x003f	/* Threshold Field */
+#define PMLCB_THRESHOLD_SHIFT	0
+
+#define PMRN_PMGC0	0x190	/* PM Global Control 0 */
+
+#define PMGC0_FAC	0x80000000	/* Freeze all Counters */
+#define PMGC0_PMIE	0x40000000	/* Interrupt Enable */
+#define PMGC0_FCECE	0x20000000	/* Freeze countes on
+					   Enabled Condition or
+					   Event */
+
+#define PMRN_UPMC0	0x000	/* User Performance Monitor Counter 0 */
+#define PMRN_UPMC1	0x001	/* User Performance Monitor Counter 1 */
+#define PMRN_UPMC2	0x002	/* User Performance Monitor Counter 1 */
+#define PMRN_UPMC3	0x003	/* User Performance Monitor Counter 1 */
+#define PMRN_UPMLCA0	0x080	/* User PM Local Control A0 */
+#define PMRN_UPMLCA1	0x081	/* User PM Local Control A1 */
+#define PMRN_UPMLCA2	0x082	/* User PM Local Control A2 */
+#define PMRN_UPMLCA3	0x083	/* User PM Local Control A3 */
+#define PMRN_UPMLCB0	0x100	/* User PM Local Control B0 */
+#define PMRN_UPMLCB1	0x101	/* User PM Local Control B1 */
+#define PMRN_UPMLCB2	0x102	/* User PM Local Control B2 */
+#define PMRN_UPMLCB3	0x103	/* User PM Local Control B3 */
+#define PMRN_UPMGC0	0x180	/* User PM Global Control 0 */
+
+
+#endif /* __ASM_POWERPC_REG_FSL_EMB_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/resource.h b/arch/powerpc/include/asm/resource.h
new file mode 100644
index 000000000000..04bc4db8921b
--- /dev/null
+++ b/arch/powerpc/include/asm/resource.h
@@ -0,0 +1 @@
+#include <asm-generic/resource.h>
diff --git a/arch/powerpc/include/asm/rheap.h b/arch/powerpc/include/asm/rheap.h
new file mode 100644
index 000000000000..172381769cfc
--- /dev/null
+++ b/arch/powerpc/include/asm/rheap.h
@@ -0,0 +1,89 @@
+/*
+ * include/asm-ppc/rheap.h
+ *
+ * Header file for the implementation of a remote heap.
+ *
+ * Author: Pantelis Antoniou <panto@intracom.gr>
+ *
+ * 2004 (c) INTRACOM S.A. Greece. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#ifndef __ASM_PPC_RHEAP_H__
+#define __ASM_PPC_RHEAP_H__
+
+#include <linux/list.h>
+
+typedef struct _rh_block {
+	struct list_head list;
+	unsigned long start;
+	int size;
+	const char *owner;
+} rh_block_t;
+
+typedef struct _rh_info {
+	unsigned int alignment;
+	int max_blocks;
+	int empty_slots;
+	rh_block_t *block;
+	struct list_head empty_list;
+	struct list_head free_list;
+	struct list_head taken_list;
+	unsigned int flags;
+} rh_info_t;
+
+#define RHIF_STATIC_INFO	0x1
+#define RHIF_STATIC_BLOCK	0x2
+
+typedef struct _rh_stats {
+	unsigned long start;
+	int size;
+	const char *owner;
+} rh_stats_t;
+
+#define RHGS_FREE	0
+#define RHGS_TAKEN	1
+
+/* Create a remote heap dynamically */
+extern rh_info_t *rh_create(unsigned int alignment);
+
+/* Destroy a remote heap, created by rh_create() */
+extern void rh_destroy(rh_info_t * info);
+
+/* Initialize in place a remote info block */
+extern void rh_init(rh_info_t * info, unsigned int alignment, int max_blocks,
+		    rh_block_t * block);
+
+/* Attach a free region to manage */
+extern int rh_attach_region(rh_info_t * info, unsigned long start, int size);
+
+/* Detach a free region */
+extern unsigned long rh_detach_region(rh_info_t * info, unsigned long start, int size);
+
+/* Allocate the given size from the remote heap (with alignment) */
+extern unsigned long rh_alloc_align(rh_info_t * info, int size, int alignment,
+		const char *owner);
+
+/* Allocate the given size from the remote heap */
+extern unsigned long rh_alloc(rh_info_t * info, int size, const char *owner);
+
+/* Allocate the given size from the given address */
+extern unsigned long rh_alloc_fixed(rh_info_t * info, unsigned long start, int size,
+			    const char *owner);
+
+/* Free the allocated area */
+extern int rh_free(rh_info_t * info, unsigned long start);
+
+/* Get stats for debugging purposes */
+extern int rh_get_stats(rh_info_t * info, int what, int max_stats,
+			rh_stats_t * stats);
+
+/* Simple dump of remote heap info */
+extern void rh_dump(rh_info_t * info);
+
+/* Set owner of taken block */
+extern int rh_set_owner(rh_info_t * info, unsigned long start, const char *owner);
+
+#endif				/* __ASM_PPC_RHEAP_H__ */
diff --git a/arch/powerpc/include/asm/rio.h b/arch/powerpc/include/asm/rio.h
new file mode 100644
index 000000000000..0018bf80cb25
--- /dev/null
+++ b/arch/powerpc/include/asm/rio.h
@@ -0,0 +1,18 @@
+/*
+ * RapidIO architecture support
+ *
+ * Copyright 2005 MontaVista Software, Inc.
+ * Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef ASM_PPC_RIO_H
+#define ASM_PPC_RIO_H
+
+extern void platform_rio_init(void);
+
+#endif				/* ASM_PPC_RIO_H */
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
new file mode 100644
index 000000000000..8eaa7b28d9d0
--- /dev/null
+++ b/arch/powerpc/include/asm/rtas.h
@@ -0,0 +1,247 @@
+#ifndef _POWERPC_RTAS_H
+#define _POWERPC_RTAS_H
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+#include <asm/page.h>
+
+/*
+ * Definitions for talking to the RTAS on CHRP machines.
+ *
+ * Copyright (C) 2001 Peter Bergner
+ * Copyright (C) 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define RTAS_UNKNOWN_SERVICE (-1)
+#define RTAS_INSTANTIATE_MAX (1UL<<30) /* Don't instantiate rtas at/above this value */
+
+/* Buffer size for ppc_rtas system call. */
+#define RTAS_RMOBUF_MAX (64 * 1024)
+
+/* RTAS return status codes */
+#define RTAS_NOT_SUSPENDABLE	-9004
+#define RTAS_BUSY		-2    /* RTAS Busy */
+#define RTAS_EXTENDED_DELAY_MIN	9900
+#define RTAS_EXTENDED_DELAY_MAX	9905
+
+/*
+ * In general to call RTAS use rtas_token("string") to lookup
+ * an RTAS token for the given string (e.g. "event-scan").
+ * To actually perform the call use
+ *    ret = rtas_call(token, n_in, n_out, ...)
+ * Where n_in is the number of input parameters and
+ *       n_out is the number of output parameters
+ *
+ * If the "string" is invalid on this system, RTAS_UNKNOWN_SERVICE
+ * will be returned as a token.  rtas_call() does look for this
+ * token and error out gracefully so rtas_call(rtas_token("str"), ...)
+ * may be safely used for one-shot calls to RTAS.
+ *
+ */
+
+typedef u32 rtas_arg_t;
+
+struct rtas_args {
+	u32 token;
+	u32 nargs;
+	u32 nret; 
+	rtas_arg_t args[16];
+	rtas_arg_t *rets;     /* Pointer to return values in args[]. */
+};  
+
+struct rtas_t {
+	unsigned long entry;		/* physical address pointer */
+	unsigned long base;		/* physical address pointer */
+	unsigned long size;
+	spinlock_t lock;
+	struct rtas_args args;
+	struct device_node *dev;	/* virtual address pointer */
+};
+
+/* RTAS event classes */
+#define RTAS_INTERNAL_ERROR		0x80000000 /* set bit 0 */
+#define RTAS_EPOW_WARNING		0x40000000 /* set bit 1 */
+#define RTAS_POWERMGM_EVENTS		0x20000000 /* set bit 2 */
+#define RTAS_HOTPLUG_EVENTS		0x10000000 /* set bit 3 */
+#define RTAS_EVENT_SCAN_ALL_EVENTS	0xf0000000
+
+/* RTAS event severity */
+#define RTAS_SEVERITY_FATAL		0x5
+#define RTAS_SEVERITY_ERROR		0x4
+#define RTAS_SEVERITY_ERROR_SYNC	0x3
+#define RTAS_SEVERITY_WARNING		0x2
+#define RTAS_SEVERITY_EVENT		0x1
+#define RTAS_SEVERITY_NO_ERROR		0x0
+
+/* RTAS event disposition */
+#define RTAS_DISP_FULLY_RECOVERED	0x0
+#define RTAS_DISP_LIMITED_RECOVERY	0x1
+#define RTAS_DISP_NOT_RECOVERED		0x2
+
+/* RTAS event initiator */
+#define RTAS_INITIATOR_UNKNOWN		0x0
+#define RTAS_INITIATOR_CPU		0x1
+#define RTAS_INITIATOR_PCI		0x2
+#define RTAS_INITIATOR_ISA		0x3
+#define RTAS_INITIATOR_MEMORY		0x4
+#define RTAS_INITIATOR_POWERMGM		0x5
+
+/* RTAS event target */
+#define RTAS_TARGET_UNKNOWN		0x0
+#define RTAS_TARGET_CPU			0x1
+#define RTAS_TARGET_PCI			0x2
+#define RTAS_TARGET_ISA			0x3
+#define RTAS_TARGET_MEMORY		0x4
+#define RTAS_TARGET_POWERMGM		0x5
+
+/* RTAS event type */
+#define RTAS_TYPE_RETRY			0x01
+#define RTAS_TYPE_TCE_ERR		0x02
+#define RTAS_TYPE_INTERN_DEV_FAIL	0x03
+#define RTAS_TYPE_TIMEOUT		0x04
+#define RTAS_TYPE_DATA_PARITY		0x05
+#define RTAS_TYPE_ADDR_PARITY		0x06
+#define RTAS_TYPE_CACHE_PARITY		0x07
+#define RTAS_TYPE_ADDR_INVALID		0x08
+#define RTAS_TYPE_ECC_UNCORR		0x09
+#define RTAS_TYPE_ECC_CORR		0x0a
+#define RTAS_TYPE_EPOW			0x40
+#define RTAS_TYPE_PLATFORM		0xE0
+#define RTAS_TYPE_IO			0xE1
+#define RTAS_TYPE_INFO			0xE2
+#define RTAS_TYPE_DEALLOC		0xE3
+#define RTAS_TYPE_DUMP			0xE4
+/* I don't add PowerMGM events right now, this is a different topic */ 
+#define RTAS_TYPE_PMGM_POWER_SW_ON	0x60
+#define RTAS_TYPE_PMGM_POWER_SW_OFF	0x61
+#define RTAS_TYPE_PMGM_LID_OPEN		0x62
+#define RTAS_TYPE_PMGM_LID_CLOSE	0x63
+#define RTAS_TYPE_PMGM_SLEEP_BTN	0x64
+#define RTAS_TYPE_PMGM_WAKE_BTN		0x65
+#define RTAS_TYPE_PMGM_BATTERY_WARN	0x66
+#define RTAS_TYPE_PMGM_BATTERY_CRIT	0x67
+#define RTAS_TYPE_PMGM_SWITCH_TO_BAT	0x68
+#define RTAS_TYPE_PMGM_SWITCH_TO_AC	0x69
+#define RTAS_TYPE_PMGM_KBD_OR_MOUSE	0x6a
+#define RTAS_TYPE_PMGM_ENCLOS_OPEN	0x6b
+#define RTAS_TYPE_PMGM_ENCLOS_CLOSED	0x6c
+#define RTAS_TYPE_PMGM_RING_INDICATE	0x6d
+#define RTAS_TYPE_PMGM_LAN_ATTENTION	0x6e
+#define RTAS_TYPE_PMGM_TIME_ALARM	0x6f
+#define RTAS_TYPE_PMGM_CONFIG_CHANGE	0x70
+#define RTAS_TYPE_PMGM_SERVICE_PROC	0x71
+
+struct rtas_error_log {
+	unsigned long version:8;		/* Architectural version */
+	unsigned long severity:3;		/* Severity level of error */
+	unsigned long disposition:2;		/* Degree of recovery */
+	unsigned long extended:1;		/* extended log present? */
+	unsigned long /* reserved */ :2;	/* Reserved for future use */
+	unsigned long initiator:4;		/* Initiator of event */
+	unsigned long target:4;			/* Target of failed operation */
+	unsigned long type:8;			/* General event or error*/
+	unsigned long extended_log_length:32;	/* length in bytes */
+	unsigned char buffer[1];
+};
+
+/*
+ * This can be set by the rtas_flash module so that it can get called
+ * as the absolutely last thing before the kernel terminates.
+ */
+extern void (*rtas_flash_term_hook)(int);
+
+extern struct rtas_t rtas;
+
+extern void enter_rtas(unsigned long);
+extern int rtas_token(const char *service);
+extern int rtas_service_present(const char *service);
+extern int rtas_call(int token, int, int, int *, ...);
+extern void rtas_restart(char *cmd);
+extern void rtas_power_off(void);
+extern void rtas_halt(void);
+extern void rtas_os_term(char *str);
+extern int rtas_get_sensor(int sensor, int index, int *state);
+extern int rtas_get_power_level(int powerdomain, int *level);
+extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);
+extern int rtas_set_indicator(int indicator, int index, int new_value);
+extern int rtas_set_indicator_fast(int indicator, int index, int new_value);
+extern void rtas_progress(char *s, unsigned short hex);
+extern void rtas_initialize(void);
+
+struct rtc_time;
+extern unsigned long rtas_get_boot_time(void);
+extern void rtas_get_rtc_time(struct rtc_time *rtc_time);
+extern int rtas_set_rtc_time(struct rtc_time *rtc_time);
+
+extern unsigned int rtas_busy_delay_time(int status);
+extern unsigned int rtas_busy_delay(int status);
+
+extern int early_init_dt_scan_rtas(unsigned long node,
+		const char *uname, int depth, void *data);
+
+extern void pSeries_log_error(char *buf, unsigned int err_type, int fatal);
+
+/* Error types logged.  */
+#define ERR_FLAG_ALREADY_LOGGED	0x0
+#define ERR_FLAG_BOOT		0x1 	/* log was pulled from NVRAM on boot */
+#define ERR_TYPE_RTAS_LOG	0x2	/* from rtas event-scan */
+#define ERR_TYPE_KERNEL_PANIC	0x4	/* from panic() */
+
+/* All the types and not flags */
+#define ERR_TYPE_MASK	(ERR_TYPE_RTAS_LOG | ERR_TYPE_KERNEL_PANIC)
+
+#define RTAS_DEBUG KERN_DEBUG "RTAS: "
+ 
+#define RTAS_ERROR_LOG_MAX 2048
+
+/*
+ * Return the firmware-specified size of the error log buffer
+ *  for all rtas calls that require an error buffer argument.
+ *  This includes 'check-exception' and 'rtas-last-error'.
+ */
+extern int rtas_get_error_log_max(void);
+
+/* Event Scan Parameters */
+#define EVENT_SCAN_ALL_EVENTS	0xf0000000
+#define SURVEILLANCE_TOKEN	9000
+#define LOG_NUMBER		64		/* must be a power of two */
+#define LOG_NUMBER_MASK		(LOG_NUMBER-1)
+
+/* Some RTAS ops require a data buffer and that buffer must be < 4G.
+ * Rather than having a memory allocator, just use this buffer
+ * (get the lock first), make the RTAS call.  Copy the data instead
+ * of holding the buffer for long.
+ */
+
+#define RTAS_DATA_BUF_SIZE 4096
+extern spinlock_t rtas_data_buf_lock;
+extern char rtas_data_buf[RTAS_DATA_BUF_SIZE];
+
+/* RMO buffer reserved for user-space RTAS use */
+extern unsigned long rtas_rmo_buf;
+
+#define GLOBAL_INTERRUPT_QUEUE 9005
+
+/**
+ * rtas_config_addr - Format a busno, devfn and reg for RTAS.
+ * @busno: The bus number.
+ * @devfn: The device and function number as encoded by PCI_DEVFN().
+ * @reg: The register number.
+ *
+ * This function encodes the given busno, devfn and register number as
+ * required for RTAS calls that take a "config_addr" parameter.
+ * See PAPR requirement 7.3.4-1 for more info.
+ */
+static inline u32 rtas_config_addr(int busno, int devfn, int reg)
+{
+	return ((reg & 0xf00) << 20) | ((busno & 0xff) << 16) |
+			(devfn << 8) | (reg & 0xff);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _POWERPC_RTAS_H */
diff --git a/arch/powerpc/include/asm/rtc.h b/arch/powerpc/include/asm/rtc.h
new file mode 100644
index 000000000000..f5802926b6c0
--- /dev/null
+++ b/arch/powerpc/include/asm/rtc.h
@@ -0,0 +1,78 @@
+/*
+ * Real-time clock definitions and interfaces
+ *
+ * Author: Tom Rini <trini@mvista.com>
+ *
+ * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Based on:
+ * include/asm-m68k/rtc.h
+ *
+ * Copyright Richard Zidlicky
+ * implementation details for genrtc/q40rtc driver
+ *
+ * And the old drivers/macintosh/rtc.c which was heavily based on:
+ * Linux/SPARC Real Time Clock Driver
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ *
+ * With additional work by Paul Mackerras and Franz Sirl.
+ */
+
+#ifndef __ASM_POWERPC_RTC_H__
+#define __ASM_POWERPC_RTC_H__
+
+#ifdef __KERNEL__
+
+#include <linux/rtc.h>
+
+#include <asm/machdep.h>
+#include <asm/time.h>
+
+#define RTC_PIE 0x40		/* periodic interrupt enable */
+#define RTC_AIE 0x20		/* alarm interrupt enable */
+#define RTC_UIE 0x10		/* update-finished interrupt enable */
+
+/* some dummy definitions */
+#define RTC_BATT_BAD 0x100	/* battery bad */
+#define RTC_SQWE 0x08		/* enable square-wave output */
+#define RTC_DM_BINARY 0x04	/* all time/date values are BCD if clear */
+#define RTC_24H 0x02		/* 24 hour mode - else hours bit 7 means pm */
+#define RTC_DST_EN 0x01	        /* auto switch DST - works f. USA only */
+
+static inline unsigned int get_rtc_time(struct rtc_time *time)
+{
+	if (ppc_md.get_rtc_time)
+		ppc_md.get_rtc_time(time);
+	return RTC_24H;
+}
+
+/* Set the current date and time in the real time clock. */
+static inline int set_rtc_time(struct rtc_time *time)
+{
+	if (ppc_md.set_rtc_time)
+		return ppc_md.set_rtc_time(time);
+	return -EINVAL;
+}
+
+static inline unsigned int get_rtc_ss(void)
+{
+	struct rtc_time h;
+
+	get_rtc_time(&h);
+	return h.tm_sec;
+}
+
+static inline int get_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+static inline int set_rtc_pll(struct rtc_pll_info *pll)
+{
+	return -EINVAL;
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_RTC_H__ */
diff --git a/arch/powerpc/include/asm/rwsem.h b/arch/powerpc/include/asm/rwsem.h
new file mode 100644
index 000000000000..24cd9281ec37
--- /dev/null
+++ b/arch/powerpc/include/asm/rwsem.h
@@ -0,0 +1,173 @@
+#ifndef _ASM_POWERPC_RWSEM_H
+#define _ASM_POWERPC_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead."
+#endif
+
+#ifdef __KERNEL__
+
+/*
+ * R/W semaphores for PPC using the stuff in lib/rwsem.c.
+ * Adapted largely from include/asm-i386/rwsem.h
+ * by Paul Mackerras <paulus@samba.org>.
+ */
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	/* XXX this should be able to be an atomic_t  -- paulus */
+	signed int		count;
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		(-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	dep_map;
+#endif
+};
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+	{ RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
+	  LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) }
+
+#define DECLARE_RWSEM(name)		\
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+			 struct lock_class_key *key);
+
+#define init_rwsem(sem)					\
+	do {						\
+		static struct lock_class_key __key;	\
+							\
+		__init_rwsem((sem), #sem, &__key);	\
+	} while (0)
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	if (unlikely(atomic_inc_return((atomic_t *)(&sem->count)) <= 0))
+		rwsem_down_read_failed(sem);
+}
+
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	while ((tmp = sem->count) >= 0) {
+		if (tmp == cmpxchg(&sem->count, tmp,
+				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+	int tmp;
+
+	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+				(atomic_t *)(&sem->count));
+	if (unlikely(tmp != RWSEM_ACTIVE_WRITE_BIAS))
+		rwsem_down_write_failed(sem);
+}
+
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	__down_write_nested(sem, 0);
+}
+
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
+		      RWSEM_ACTIVE_WRITE_BIAS);
+	return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_dec_return((atomic_t *)(&sem->count));
+	if (unlikely(tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0))
+		rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	if (unlikely(atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
+			      (atomic_t *)(&sem->count)) < 0))
+		rwsem_wake(sem);
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	atomic_add(delta, (atomic_t *)(&sem->count));
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
+	if (tmp < 0)
+		rwsem_downgrade_wake(sem);
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	return atomic_add_return(delta, (atomic_t *)(&sem->count));
+}
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_RWSEM_H */
diff --git a/arch/powerpc/include/asm/scatterlist.h b/arch/powerpc/include/asm/scatterlist.h
new file mode 100644
index 000000000000..fcf7d55afe45
--- /dev/null
+++ b/arch/powerpc/include/asm/scatterlist.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_POWERPC_SCATTERLIST_H
+#define _ASM_POWERPC_SCATTERLIST_H
+/*
+ * Copyright (C) 2001 PPC64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#include <asm/dma.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long sg_magic;
+#endif
+	unsigned long page_link;
+	unsigned int offset;
+	unsigned int length;
+
+	/* For TCE support */
+	dma_addr_t dma_address;
+	u32 dma_length;
+};
+
+/*
+ * These macros should be used after a dma_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#ifdef __powerpc64__
+#define sg_dma_len(sg)		((sg)->dma_length)
+#else
+#define sg_dma_len(sg)		((sg)->length)
+#endif
+
+#ifdef __powerpc64__
+#define ISA_DMA_THRESHOLD	(~0UL)
+#endif
+
+#define ARCH_HAS_SG_CHAIN
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SCATTERLIST_H */
diff --git a/arch/powerpc/include/asm/seccomp.h b/arch/powerpc/include/asm/seccomp.h
new file mode 100644
index 000000000000..853765eb1f65
--- /dev/null
+++ b/arch/powerpc/include/asm/seccomp.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_POWERPC_SECCOMP_H
+#define _ASM_POWERPC_SECCOMP_H
+
+#ifdef __KERNEL__
+#include <linux/thread_info.h>
+#endif
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#define __NR_seccomp_read_32 __NR_read
+#define __NR_seccomp_write_32 __NR_write
+#define __NR_seccomp_exit_32 __NR_exit
+#define __NR_seccomp_sigreturn_32 __NR_sigreturn
+
+#endif	/* _ASM_POWERPC_SECCOMP_H */
diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h
new file mode 100644
index 000000000000..916018e425c4
--- /dev/null
+++ b/arch/powerpc/include/asm/sections.h
@@ -0,0 +1,22 @@
+#ifndef _ASM_POWERPC_SECTIONS_H
+#define _ASM_POWERPC_SECTIONS_H
+#ifdef __KERNEL__
+
+#include <asm-generic/sections.h>
+
+#ifdef __powerpc64__
+
+extern char _end[];
+
+static inline int in_kernel_text(unsigned long addr)
+{
+	if (addr >= (unsigned long)_stext && addr < (unsigned long)__init_end)
+		return 1;
+
+	return 0;
+}
+
+#endif
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_SECTIONS_H */
diff --git a/arch/powerpc/include/asm/sembuf.h b/arch/powerpc/include/asm/sembuf.h
new file mode 100644
index 000000000000..99a41938ae3d
--- /dev/null
+++ b/arch/powerpc/include/asm/sembuf.h
@@ -0,0 +1,36 @@
+#ifndef _ASM_POWERPC_SEMBUF_H
+#define _ASM_POWERPC_SEMBUF_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * The semid64_ds structure for PPC architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;	/* permissions .. see ipc.h */
+#ifndef __powerpc64__
+	unsigned long	__unused1;
+#endif
+	__kernel_time_t	sem_otime;	/* last semop time */
+#ifndef __powerpc64__
+	unsigned long	__unused2;
+#endif
+	__kernel_time_t	sem_ctime;	/* last change time */
+	unsigned long	sem_nsems;	/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif	/* _ASM_POWERPC_SEMBUF_H */
diff --git a/arch/powerpc/include/asm/serial.h b/arch/powerpc/include/asm/serial.h
new file mode 100644
index 000000000000..3e8589b43cb2
--- /dev/null
+++ b/arch/powerpc/include/asm/serial.h
@@ -0,0 +1,24 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_SERIAL_H
+#define _ASM_POWERPC_SERIAL_H
+
+/*
+ * Serial ports are not listed here, because they are discovered
+ * through the device tree.
+ */
+
+/* Default baud base if not found in device-tree */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#ifdef CONFIG_PPC_UDBG_16550
+extern void find_legacy_serial_ports(void);
+#else
+#define find_legacy_serial_ports()	do { } while (0)
+#endif
+
+#endif /* _PPC64_SERIAL_H */
diff --git a/arch/powerpc/include/asm/setjmp.h b/arch/powerpc/include/asm/setjmp.h
new file mode 100644
index 000000000000..279d03a1eec6
--- /dev/null
+++ b/arch/powerpc/include/asm/setjmp.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright © 2008 Michael Neuling IBM Corporation
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ */
+#ifndef _ASM_POWERPC_SETJMP_H
+#define _ASM_POWERPC_SETJMP_H
+
+#define JMP_BUF_LEN    23
+
+extern long setjmp(long *);
+extern void longjmp(long *, long);
+
+#endif /* _ASM_POWERPC_SETJMP_H */
diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h
new file mode 100644
index 000000000000..817fac0a0714
--- /dev/null
+++ b/arch/powerpc/include/asm/setup.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_POWERPC_SETUP_H
+#define _ASM_POWERPC_SETUP_H
+
+#define COMMAND_LINE_SIZE	512
+
+#endif	/* _ASM_POWERPC_SETUP_H */
diff --git a/arch/powerpc/include/asm/shmbuf.h b/arch/powerpc/include/asm/shmbuf.h
new file mode 100644
index 000000000000..8efa39698b6c
--- /dev/null
+++ b/arch/powerpc/include/asm/shmbuf.h
@@ -0,0 +1,59 @@
+#ifndef _ASM_POWERPC_SHMBUF_H
+#define _ASM_POWERPC_SHMBUF_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/*
+ * The shmid64_ds structure for PPC architecture.
+ *
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+#ifndef __powerpc64__
+	unsigned long		__unused1;
+#endif
+	__kernel_time_t		shm_atime;	/* last attach time */
+#ifndef __powerpc64__
+	unsigned long		__unused2;
+#endif
+	__kernel_time_t		shm_dtime;	/* last detach time */
+#ifndef __powerpc64__
+	unsigned long		__unused3;
+#endif
+	__kernel_time_t		shm_ctime;	/* last change time */
+#ifndef __powerpc64__
+	unsigned long		__unused4;
+#endif
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused5;
+	unsigned long		__unused6;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif	/* _ASM_POWERPC_SHMBUF_H */
diff --git a/arch/powerpc/include/asm/shmparam.h b/arch/powerpc/include/asm/shmparam.h
new file mode 100644
index 000000000000..5cda42a6d39e
--- /dev/null
+++ b/arch/powerpc/include/asm/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_POWERPC_SHMPARAM_H
+#define _ASM_POWERPC_SHMPARAM_H
+
+#define	SHMLBA PAGE_SIZE		 /* attach addr a multiple of this */
+
+#endif	/* _ASM_POWERPC_SHMPARAM_H */
diff --git a/arch/powerpc/include/asm/sigcontext.h b/arch/powerpc/include/asm/sigcontext.h
new file mode 100644
index 000000000000..9c1f24fd5d11
--- /dev/null
+++ b/arch/powerpc/include/asm/sigcontext.h
@@ -0,0 +1,87 @@
+#ifndef _ASM_POWERPC_SIGCONTEXT_H
+#define _ASM_POWERPC_SIGCONTEXT_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/compiler.h>
+#include <asm/ptrace.h>
+#ifdef __powerpc64__
+#include <asm/elf.h>
+#endif
+
+struct sigcontext {
+	unsigned long	_unused[4];
+	int		signal;
+#ifdef __powerpc64__
+	int		_pad0;
+#endif
+	unsigned long	handler;
+	unsigned long	oldmask;
+	struct pt_regs	__user *regs;
+#ifdef __powerpc64__
+	elf_gregset_t	gp_regs;
+	elf_fpregset_t	fp_regs;
+/*
+ * To maintain compatibility with current implementations the sigcontext is
+ * extended by appending a pointer (v_regs) to a quadword type (elf_vrreg_t)
+ * followed by an unstructured (vmx_reserve) field of 69 doublewords.  This
+ * allows the array of vector registers to be quadword aligned independent of
+ * the alignment of the containing sigcontext or ucontext. It is the
+ * responsibility of the code setting the sigcontext to set this pointer to
+ * either NULL (if this processor does not support the VMX feature) or the
+ * address of the first quadword within the allocated (vmx_reserve) area.
+ *
+ * The pointer (v_regs) of vector type (elf_vrreg_t) is type compatible with
+ * an array of 34 quadword entries (elf_vrregset_t).  The entries with
+ * indexes 0-31 contain the corresponding vector registers.  The entry with
+ * index 32 contains the vscr as the last word (offset 12) within the
+ * quadword.  This allows the vscr to be stored as either a quadword (since
+ * it must be copied via a vector register to/from storage) or as a word.
+ * The entry with index 33 contains the vrsave as the first word (offset 0)
+ * within the quadword.
+ *
+ * Part of the VSX data is stored here also by extending vmx_restore
+ * by an additional 32 double words.  Architecturally the layout of
+ * the VSR registers and how they overlap on top of the legacy FPR and
+ * VR registers is shown below:
+ *
+ *                    VSR doubleword 0               VSR doubleword 1
+ *           ----------------------------------------------------------------
+ *   VSR[0]  |             FPR[0]            |                              |
+ *           ----------------------------------------------------------------
+ *   VSR[1]  |             FPR[1]            |                              |
+ *           ----------------------------------------------------------------
+ *           |              ...              |                              |
+ *           |              ...              |                              |
+ *           ----------------------------------------------------------------
+ *   VSR[30] |             FPR[30]           |                              |
+ *           ----------------------------------------------------------------
+ *   VSR[31] |             FPR[31]           |                              |
+ *           ----------------------------------------------------------------
+ *   VSR[32] |                             VR[0]                            |
+ *           ----------------------------------------------------------------
+ *   VSR[33] |                             VR[1]                            |
+ *           ----------------------------------------------------------------
+ *           |                              ...                             |
+ *           |                              ...                             |
+ *           ----------------------------------------------------------------
+ *   VSR[62] |                             VR[30]                           |
+ *           ----------------------------------------------------------------
+ *   VSR[63] |                             VR[31]                           |
+ *           ----------------------------------------------------------------
+ *
+ * FPR/VSR 0-31 doubleword 0 is stored in fp_regs, and VMX/VSR 32-63
+ * is stored at the start of vmx_reserve.  vmx_reserve is extended for
+ * backwards compatility to store VSR 0-31 doubleword 1 after the VMX
+ * registers and vscr/vrsave.
+ */
+	elf_vrreg_t	__user *v_regs;
+	long		vmx_reserve[ELF_NVRREG+ELF_NVRREG+32+1];
+#endif
+};
+
+#endif /* _ASM_POWERPC_SIGCONTEXT_H */
diff --git a/arch/powerpc/include/asm/siginfo.h b/arch/powerpc/include/asm/siginfo.h
new file mode 100644
index 000000000000..12f1bce037be
--- /dev/null
+++ b/arch/powerpc/include/asm/siginfo.h
@@ -0,0 +1,26 @@
+#ifndef _ASM_POWERPC_SIGINFO_H
+#define _ASM_POWERPC_SIGINFO_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __powerpc64__
+#    define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+#    define SI_PAD_SIZE32		((SI_MAX_SIZE/sizeof(int)) - 3)
+#endif
+
+#include <asm-generic/siginfo.h>
+
+/*
+ * SIGTRAP si_codes
+ */
+#define TRAP_BRANCH	(__SI_FAULT|3)	/* process taken branch trap */
+#define TRAP_HWBKPT	(__SI_FAULT|4)	/* hardware breakpoint or watchpoint */
+#undef NSIGTRAP
+#define NSIGTRAP	4
+
+#endif	/* _ASM_POWERPC_SIGINFO_H */
diff --git a/arch/powerpc/include/asm/signal.h b/arch/powerpc/include/asm/signal.h
new file mode 100644
index 000000000000..a7360cdd99eb
--- /dev/null
+++ b/arch/powerpc/include/asm/signal.h
@@ -0,0 +1,150 @@
+#ifndef _ASM_POWERPC_SIGNAL_H
+#define _ASM_POWERPC_SIGNAL_H
+
+#include <linux/types.h>
+
+#define _NSIG		64
+#ifdef __powerpc64__
+#define _NSIG_BPW	64
+#else
+#define _NSIG_BPW	32
+#endif
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK is not currently supported, but will allow sigaltstack(2).
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001U
+#define SA_NOCLDWAIT	0x00000002U
+#define SA_SIGINFO	0x00000004U
+#define SA_ONSTACK	0x08000000U
+#define SA_RESTART	0x10000000U
+#define SA_NODEFER	0x40000000U
+#define SA_RESETHAND	0x80000000U
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000U
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	__sigrestore_t sa_restorer;
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+typedef struct sigaltstack {
+	void __user *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+struct pt_regs;
+extern void do_signal(struct pt_regs *regs, unsigned long thread_info_flags);
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+#endif /* __KERNEL__ */
+
+#ifndef __powerpc64__
+/*
+ * These are parameters to dbg_sigreturn syscall.  They enable or
+ * disable certain debugging things that can be done from signal
+ * handlers.  The dbg_sigreturn syscall *must* be called from a
+ * SA_SIGINFO signal so the ucontext can be passed to it.  It takes an
+ * array of struct sig_dbg_op, which has the debug operations to
+ * perform before returning from the signal.
+ */
+struct sig_dbg_op {
+	int dbg_type;
+	unsigned long dbg_value;
+};
+
+/* Enable or disable single-stepping.  The value sets the state. */
+#define SIG_DBG_SINGLE_STEPPING		1
+
+/* Enable or disable branch tracing.  The value sets the state. */
+#define SIG_DBG_BRANCH_TRACING		2
+#endif /* ! __powerpc64__ */
+
+#endif /* _ASM_POWERPC_SIGNAL_H */
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
new file mode 100644
index 000000000000..4d28e1e4521b
--- /dev/null
+++ b/arch/powerpc/include/asm/smp.h
@@ -0,0 +1,127 @@
+/* 
+ * smp.h: PowerPC-specific SMP code.
+ *
+ * Original was a copy of sparc smp.h.  Now heavily modified
+ * for PPC.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996-2001 Cort Dougan <cort@fsmlabs.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_SMP_H
+#define _ASM_POWERPC_SMP_H
+#ifdef __KERNEL__
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/kernel.h>
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+#endif
+#include <asm/percpu.h>
+
+extern int boot_cpuid;
+
+extern void cpu_die(void);
+
+#ifdef CONFIG_SMP
+
+extern void smp_send_debugger_break(int cpu);
+extern void smp_message_recv(int);
+
+DECLARE_PER_CPU(unsigned int, pvr);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern void fixup_irqs(cpumask_t map);
+int generic_cpu_disable(void);
+int generic_cpu_enable(unsigned int cpu);
+void generic_cpu_die(unsigned int cpu);
+void generic_mach_cpu_die(void);
+#endif
+
+#ifdef CONFIG_PPC64
+#define raw_smp_processor_id()	(local_paca->paca_index)
+#define hard_smp_processor_id() (get_paca()->hw_cpu_id)
+#else
+/* 32-bit */
+extern int smp_hw_index[];
+
+#define raw_smp_processor_id()	(current_thread_info()->cpu)
+#define hard_smp_processor_id() 	(smp_hw_index[smp_processor_id()])
+#define get_hard_smp_processor_id(cpu)	(smp_hw_index[(cpu)])
+#define set_hard_smp_processor_id(cpu, phys)\
+					(smp_hw_index[(cpu)] = (phys))
+#endif
+
+DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+DECLARE_PER_CPU(cpumask_t, cpu_core_map);
+extern int cpu_to_core_id(int cpu);
+
+/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
+ *
+ * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up
+ * in /proc/interrupts will be wrong!!! --Troy */
+#define PPC_MSG_CALL_FUNCTION   0
+#define PPC_MSG_RESCHEDULE      1
+#define PPC_MSG_CALL_FUNC_SINGLE	2
+#define PPC_MSG_DEBUGGER_BREAK  3
+
+void smp_init_iSeries(void);
+void smp_init_pSeries(void);
+void smp_init_cell(void);
+void smp_init_celleb(void);
+void smp_setup_cpu_maps(void);
+void smp_setup_cpu_sibling_map(void);
+
+extern int __cpu_disable(void);
+extern void __cpu_die(unsigned int cpu);
+
+#else
+/* for UP */
+#define hard_smp_processor_id()		0
+#define smp_setup_cpu_maps()
+
+#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_PPC64
+#define get_hard_smp_processor_id(CPU) (paca[(CPU)].hw_cpu_id)
+#define set_hard_smp_processor_id(CPU, VAL) \
+	do { (paca[(CPU)].hw_cpu_id = (VAL)); } while (0)
+
+extern void smp_release_cpus(void);
+
+#else
+/* 32-bit */
+#ifndef CONFIG_SMP
+extern int boot_cpuid_phys;
+#define get_hard_smp_processor_id(cpu) 	boot_cpuid_phys
+#define set_hard_smp_processor_id(cpu, phys)
+#endif
+#endif
+
+extern int smt_enabled_at_boot;
+
+extern int smp_mpic_probe(void);
+extern void smp_mpic_setup_cpu(int cpu);
+extern void smp_generic_kick_cpu(int nr);
+
+extern void smp_generic_give_timebase(void);
+extern void smp_generic_take_timebase(void);
+
+extern struct smp_ops_t *smp_ops;
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SMP_H) */
diff --git a/arch/powerpc/include/asm/smu.h b/arch/powerpc/include/asm/smu.h
new file mode 100644
index 000000000000..7ae2753da565
--- /dev/null
+++ b/arch/powerpc/include/asm/smu.h
@@ -0,0 +1,700 @@
+#ifndef _SMU_H
+#define _SMU_H
+
+/*
+ * Definitions for talking to the SMU chip in newer G5 PowerMacs
+ */
+#ifdef __KERNEL__
+#include <linux/list.h>
+#endif
+#include <linux/types.h>
+
+/*
+ * Known SMU commands
+ *
+ * Most of what is below comes from looking at the Open Firmware driver,
+ * though this is still incomplete and could use better documentation here
+ * or there...
+ */
+
+
+/*
+ * Partition info commands
+ *
+ * These commands are used to retrieve the sdb-partition-XX datas from
+ * the SMU. The length is always 2. First byte is the subcommand code
+ * and second byte is the partition ID.
+ *
+ * The reply is 6 bytes:
+ *
+ *  - 0..1 : partition address
+ *  - 2    : a byte containing the partition ID
+ *  - 3    : length (maybe other bits are rest of header ?)
+ *
+ * The data must then be obtained with calls to another command:
+ * SMU_CMD_MISC_ee_GET_DATABLOCK_REC (described below).
+ */
+#define SMU_CMD_PARTITION_COMMAND		0x3e
+#define   SMU_CMD_PARTITION_LATEST		0x01
+#define   SMU_CMD_PARTITION_BASE		0x02
+#define   SMU_CMD_PARTITION_UPDATE		0x03
+
+
+/*
+ * Fan control
+ *
+ * This is a "mux" for fan control commands. The command seem to
+ * act differently based on the number of arguments. With 1 byte
+ * of argument, this seem to be queries for fans status, setpoint,
+ * etc..., while with 0xe arguments, we will set the fans speeds.
+ *
+ * Queries (1 byte arg):
+ * ---------------------
+ *
+ * arg=0x01: read RPM fans status
+ * arg=0x02: read RPM fans setpoint
+ * arg=0x11: read PWM fans status
+ * arg=0x12: read PWM fans setpoint
+ *
+ * the "status" queries return the current speed while the "setpoint" ones
+ * return the programmed/target speed. It _seems_ that the result is a bit
+ * mask in the first byte of active/available fans, followed by 6 words (16
+ * bits) containing the requested speed.
+ *
+ * Setpoint (14 bytes arg):
+ * ------------------------
+ *
+ * first arg byte is 0 for RPM fans and 0x10 for PWM. Second arg byte is the
+ * mask of fans affected by the command. Followed by 6 words containing the
+ * setpoint value for selected fans in the mask (or 0 if mask value is 0)
+ */
+#define SMU_CMD_FAN_COMMAND			0x4a
+
+
+/*
+ * Battery access
+ *
+ * Same command number as the PMU, could it be same syntax ?
+ */
+#define SMU_CMD_BATTERY_COMMAND			0x6f
+#define   SMU_CMD_GET_BATTERY_INFO		0x00
+
+/*
+ * Real time clock control
+ *
+ * This is a "mux", first data byte contains the "sub" command.
+ * The "RTC" part of the SMU controls the date, time, powerup
+ * timer, but also a PRAM
+ *
+ * Dates are in BCD format on 7 bytes:
+ * [sec] [min] [hour] [weekday] [month day] [month] [year]
+ * with month being 1 based and year minus 100
+ */
+#define SMU_CMD_RTC_COMMAND			0x8e
+#define   SMU_CMD_RTC_SET_PWRUP_TIMER		0x00 /* i: 7 bytes date */
+#define   SMU_CMD_RTC_GET_PWRUP_TIMER		0x01 /* o: 7 bytes date */
+#define   SMU_CMD_RTC_STOP_PWRUP_TIMER		0x02
+#define   SMU_CMD_RTC_SET_PRAM_BYTE_ACC		0x20 /* i: 1 byte (address?) */
+#define   SMU_CMD_RTC_SET_PRAM_AUTOINC		0x21 /* i: 1 byte (data?) */
+#define   SMU_CMD_RTC_SET_PRAM_LO_BYTES 	0x22 /* i: 10 bytes */
+#define   SMU_CMD_RTC_SET_PRAM_HI_BYTES 	0x23 /* i: 10 bytes */
+#define   SMU_CMD_RTC_GET_PRAM_BYTE		0x28 /* i: 1 bytes (address?) */
+#define   SMU_CMD_RTC_GET_PRAM_LO_BYTES 	0x29 /* o: 10 bytes */
+#define   SMU_CMD_RTC_GET_PRAM_HI_BYTES 	0x2a /* o: 10 bytes */
+#define	  SMU_CMD_RTC_SET_DATETIME		0x80 /* i: 7 bytes date */
+#define   SMU_CMD_RTC_GET_DATETIME		0x81 /* o: 7 bytes date */
+
+ /*
+  * i2c commands
+  *
+  * To issue an i2c command, first is to send a parameter block to the
+  * the SMU. This is a command of type 0x9a with 9 bytes of header
+  * eventually followed by data for a write:
+  *
+  * 0: bus number (from device-tree usually, SMU has lots of busses !)
+  * 1: transfer type/format (see below)
+  * 2: device address. For combined and combined4 type transfers, this
+  *    is the "write" version of the address (bit 0x01 cleared)
+  * 3: subaddress length (0..3)
+  * 4: subaddress byte 0 (or only byte for subaddress length 1)
+  * 5: subaddress byte 1
+  * 6: subaddress byte 2
+  * 7: combined address (device address for combined mode data phase)
+  * 8: data length
+  *
+  * The transfer types are the same good old Apple ones it seems,
+  * that is:
+  *   - 0x00: Simple transfer
+  *   - 0x01: Subaddress transfer (addr write + data tx, no restart)
+  *   - 0x02: Combined transfer (addr write + restart + data tx)
+  *
+  * This is then followed by actual data for a write.
+  *
+  * At this point, the OF driver seems to have a limitation on transfer
+  * sizes of 0xd bytes on reads and 0x5 bytes on writes. I do not know
+  * wether this is just an OF limit due to some temporary buffer size
+  * or if this is an SMU imposed limit. This driver has the same limitation
+  * for now as I use a 0x10 bytes temporary buffer as well
+  *
+  * Once that is completed, a response is expected from the SMU. This is
+  * obtained via a command of type 0x9a with a length of 1 byte containing
+  * 0 as the data byte. OF also fills the rest of the data buffer with 0xff's
+  * though I can't tell yet if this is actually necessary. Once this command
+  * is complete, at this point, all I can tell is what OF does. OF tests
+  * byte 0 of the reply:
+  *   - on read, 0xfe or 0xfc : bus is busy, wait (see below) or nak ?
+  *   - on read, 0x00 or 0x01 : reply is in buffer (after the byte 0)
+  *   - on write, < 0 -> failure (immediate exit)
+  *   - else, OF just exists (without error, weird)
+  *
+  * So on read, there is this wait-for-busy thing when getting a 0xfc or
+  * 0xfe result. OF does a loop of up to 64 retries, waiting 20ms and
+  * doing the above again until either the retries expire or the result
+  * is no longer 0xfe or 0xfc
+  *
+  * The Darwin I2C driver is less subtle though. On any non-success status
+  * from the response command, it waits 5ms and tries again up to 20 times,
+  * it doesn't differenciate between fatal errors or "busy" status.
+  *
+  * This driver provides an asynchronous paramblock based i2c command
+  * interface to be used either directly by low level code or by a higher
+  * level driver interfacing to the linux i2c layer. The current
+  * implementation of this relies on working timers & timer interrupts
+  * though, so be careful of calling context for now. This may be "fixed"
+  * in the future by adding a polling facility.
+  */
+#define SMU_CMD_I2C_COMMAND			0x9a
+          /* transfer types */
+#define   SMU_I2C_TRANSFER_SIMPLE	0x00
+#define   SMU_I2C_TRANSFER_STDSUB	0x01
+#define   SMU_I2C_TRANSFER_COMBINED	0x02
+
+/*
+ * Power supply control
+ *
+ * The "sub" command is an ASCII string in the data, the
+ * data length is that of the string.
+ *
+ * The VSLEW command can be used to get or set the voltage slewing.
+ *  - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
+ *    reply at data offset 6, 7 and 8.
+ *  - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is
+ *    used to set the voltage slewing point. The SMU replies with "DONE"
+ * I yet have to figure out their exact meaning of those 3 bytes in
+ * both cases. They seem to be:
+ *  x = processor mask
+ *  y = op. point index
+ *  z = processor freq. step index
+ * I haven't yet decyphered result codes
+ *
+ */
+#define SMU_CMD_POWER_COMMAND			0xaa
+#define   SMU_CMD_POWER_RESTART		       	"RESTART"
+#define   SMU_CMD_POWER_SHUTDOWN		"SHUTDOWN"
+#define   SMU_CMD_POWER_VOLTAGE_SLEW		"VSLEW"
+
+/*
+ * Read ADC sensors
+ *
+ * This command takes one byte of parameter: the sensor ID (or "reg"
+ * value in the device-tree) and returns a 16 bits value
+ */
+#define SMU_CMD_READ_ADC			0xd8
+
+
+/* Misc commands
+ *
+ * This command seem to be a grab bag of various things
+ *
+ * Parameters:
+ *   1: subcommand
+ */
+#define SMU_CMD_MISC_df_COMMAND			0xdf
+
+/*
+ * Sets "system ready" status
+ *
+ * I did not yet understand how it exactly works or what it does.
+ *
+ * Guessing from OF code, 0x02 activates the display backlight. Apple uses/used
+ * the same codebase for all OF versions. On PowerBooks, this command would
+ * enable the backlight. For the G5s, it only activates the front LED. However,
+ * don't take this for granted.
+ *
+ * Parameters:
+ *   2: status [0x00, 0x01 or 0x02]
+ */
+#define   SMU_CMD_MISC_df_SET_DISPLAY_LIT	0x02
+
+/*
+ * Sets mode of power switch.
+ *
+ * What this actually does is not yet known. Maybe it enables some interrupt.
+ *
+ * Parameters:
+ *   2: enable power switch? [0x00 or 0x01]
+ *   3 (optional): enable nmi? [0x00 or 0x01]
+ *
+ * Returns:
+ *   If parameter 2 is 0x00 and parameter 3 is not specified, returns wether
+ *   NMI is enabled. Otherwise unknown.
+ */
+#define   SMU_CMD_MISC_df_NMI_OPTION		0x04
+
+/* Sets LED dimm offset.
+ *
+ * The front LED dimms itself during sleep. Its brightness (or, well, the PWM
+ * frequency) depends on current time. Therefore, the SMU needs to know the
+ * timezone.
+ *
+ * Parameters:
+ *   2-8: unknown (BCD coding)
+ */
+#define   SMU_CMD_MISC_df_DIMM_OFFSET		0x99
+
+
+/*
+ * Version info commands
+ *
+ * Parameters:
+ *   1 (optional): Specifies version part to retrieve
+ *
+ * Returns:
+ *   Version value
+ */
+#define SMU_CMD_VERSION_COMMAND			0xea
+#define   SMU_VERSION_RUNNING			0x00
+#define   SMU_VERSION_BASE			0x01
+#define   SMU_VERSION_UPDATE			0x02
+
+
+/*
+ * Switches
+ *
+ * These are switches whose status seems to be known to the SMU.
+ *
+ * Parameters:
+ *   none
+ *
+ * Result:
+ *   Switch bits (ORed, see below)
+ */
+#define SMU_CMD_SWITCHES			0xdc
+
+/* Switches bits */
+#define SMU_SWITCH_CASE_CLOSED			0x01
+#define SMU_SWITCH_AC_POWER			0x04
+#define SMU_SWITCH_POWER_SWITCH			0x08
+
+
+/*
+ * Misc commands
+ *
+ * This command seem to be a grab bag of various things
+ *
+ * SMU_CMD_MISC_ee_GET_DATABLOCK_REC is used, among others, to
+ * transfer blocks of data from the SMU. So far, I've decrypted it's
+ * usage to retrieve partition data. In order to do that, you have to
+ * break your transfer in "chunks" since that command cannot transfer
+ * more than a chunk at a time. The chunk size used by OF is 0xe bytes,
+ * but it seems that the darwin driver will let you do 0x1e bytes if
+ * your "PMU" version is >= 0x30. You can get the "PMU" version apparently
+ * either in the last 16 bits of property "smu-version-pmu" or as the 16
+ * bytes at offset 1 of "smu-version-info"
+ *
+ * For each chunk, the command takes 7 bytes of arguments:
+ *  byte 0: subcommand code (0x02)
+ *  byte 1: 0x04 (always, I don't know what it means, maybe the address
+ *                space to use or some other nicety. It's hard coded in OF)
+ *  byte 2..5: SMU address of the chunk (big endian 32 bits)
+ *  byte 6: size to transfer (up to max chunk size)
+ *
+ * The data is returned directly
+ */
+#define SMU_CMD_MISC_ee_COMMAND			0xee
+#define   SMU_CMD_MISC_ee_GET_DATABLOCK_REC	0x02
+
+/* Retrieves currently used watts.
+ *
+ * Parameters:
+ *   1: 0x03 (Meaning unknown)
+ */
+#define   SMU_CMD_MISC_ee_GET_WATTS		0x03
+
+#define   SMU_CMD_MISC_ee_LEDS_CTRL		0x04 /* i: 00 (00,01) [00] */
+#define   SMU_CMD_MISC_ee_GET_DATA		0x05 /* i: 00 , o: ?? */
+
+
+/*
+ * Power related commands
+ *
+ * Parameters:
+ *   1: subcommand
+ */
+#define SMU_CMD_POWER_EVENTS_COMMAND		0x8f
+
+/* SMU_POWER_EVENTS subcommands */
+enum {
+	SMU_PWR_GET_POWERUP_EVENTS      = 0x00,
+	SMU_PWR_SET_POWERUP_EVENTS      = 0x01,
+	SMU_PWR_CLR_POWERUP_EVENTS      = 0x02,
+	SMU_PWR_GET_WAKEUP_EVENTS       = 0x03,
+	SMU_PWR_SET_WAKEUP_EVENTS       = 0x04,
+	SMU_PWR_CLR_WAKEUP_EVENTS       = 0x05,
+
+	/*
+	 * Get last shutdown cause
+	 *
+	 * Returns:
+	 *   1 byte (signed char): Last shutdown cause. Exact meaning unknown.
+	 */
+	SMU_PWR_LAST_SHUTDOWN_CAUSE	= 0x07,
+
+	/*
+	 * Sets or gets server ID. Meaning or use is unknown.
+	 *
+	 * Parameters:
+	 *   2 (optional): Set server ID (1 byte)
+	 *
+	 * Returns:
+	 *   1 byte (server ID?)
+	 */
+	SMU_PWR_SERVER_ID		= 0x08,
+};
+
+/* Power events wakeup bits */
+enum {
+	SMU_PWR_WAKEUP_KEY              = 0x01, /* Wake on key press */
+	SMU_PWR_WAKEUP_AC_INSERT        = 0x02, /* Wake on AC adapter plug */
+	SMU_PWR_WAKEUP_AC_CHANGE        = 0x04,
+	SMU_PWR_WAKEUP_LID_OPEN         = 0x08,
+	SMU_PWR_WAKEUP_RING             = 0x10,
+};
+
+
+/*
+ * - Kernel side interface -
+ */
+
+#ifdef __KERNEL__
+
+/*
+ * Asynchronous SMU commands
+ *
+ * Fill up this structure and submit it via smu_queue_command(),
+ * and get notified by the optional done() callback, or because
+ * status becomes != 1
+ */
+
+struct smu_cmd;
+
+struct smu_cmd
+{
+	/* public */
+	u8			cmd;		/* command */
+	int			data_len;	/* data len */
+	int			reply_len;	/* reply len */
+	void			*data_buf;	/* data buffer */
+	void			*reply_buf;	/* reply buffer */
+	int			status;		/* command status */
+	void			(*done)(struct smu_cmd *cmd, void *misc);
+	void			*misc;
+
+	/* private */
+	struct list_head	link;
+};
+
+/*
+ * Queues an SMU command, all fields have to be initialized
+ */
+extern int smu_queue_cmd(struct smu_cmd *cmd);
+
+/*
+ * Simple command wrapper. This structure embeds a small buffer
+ * to ease sending simple SMU commands from the stack
+ */
+struct smu_simple_cmd
+{
+	struct smu_cmd	cmd;
+	u8	       	buffer[16];
+};
+
+/*
+ * Queues a simple command. All fields will be initialized by that
+ * function
+ */
+extern int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command,
+			    unsigned int data_len,
+			    void (*done)(struct smu_cmd *cmd, void *misc),
+			    void *misc,
+			    ...);
+
+/*
+ * Completion helper. Pass it to smu_queue_simple or as 'done'
+ * member to smu_queue_cmd, it will call complete() on the struct
+ * completion passed in the "misc" argument
+ */
+extern void smu_done_complete(struct smu_cmd *cmd, void *misc);
+
+/*
+ * Synchronous helpers. Will spin-wait for completion of a command
+ */
+extern void smu_spinwait_cmd(struct smu_cmd *cmd);
+
+static inline void smu_spinwait_simple(struct smu_simple_cmd *scmd)
+{
+	smu_spinwait_cmd(&scmd->cmd);
+}
+
+/*
+ * Poll routine to call if blocked with irqs off
+ */
+extern void smu_poll(void);
+
+
+/*
+ * Init routine, presence check....
+ */
+extern int smu_init(void);
+extern int smu_present(void);
+struct of_device;
+extern struct of_device *smu_get_ofdev(void);
+
+
+/*
+ * Common command wrappers
+ */
+extern void smu_shutdown(void);
+extern void smu_restart(void);
+struct rtc_time;
+extern int smu_get_rtc_time(struct rtc_time *time, int spinwait);
+extern int smu_set_rtc_time(struct rtc_time *time, int spinwait);
+
+/*
+ * SMU command buffer absolute address, exported by pmac_setup,
+ * this is allocated very early during boot.
+ */
+extern unsigned long smu_cmdbuf_abs;
+
+
+/*
+ * Kenrel asynchronous i2c interface
+ */
+
+#define SMU_I2C_READ_MAX	0x1d
+#define SMU_I2C_WRITE_MAX	0x15
+
+/* SMU i2c header, exactly matches i2c header on wire */
+struct smu_i2c_param
+{
+	u8	bus;		/* SMU bus ID (from device tree) */
+	u8	type;		/* i2c transfer type */
+	u8	devaddr;	/* device address (includes direction) */
+	u8	sublen;		/* subaddress length */
+	u8	subaddr[3];	/* subaddress */
+	u8	caddr;		/* combined address, filled by SMU driver */
+	u8	datalen;	/* length of transfer */
+	u8	data[SMU_I2C_READ_MAX];	/* data */
+};
+
+struct smu_i2c_cmd
+{
+	/* public */
+	struct smu_i2c_param	info;
+	void			(*done)(struct smu_i2c_cmd *cmd, void *misc);
+	void			*misc;
+	int			status; /* 1 = pending, 0 = ok, <0 = fail */
+
+	/* private */
+	struct smu_cmd		scmd;
+	int			read;
+	int			stage;
+	int			retries;
+	u8			pdata[32];
+	struct list_head	link;
+};
+
+/*
+ * Call this to queue an i2c command to the SMU. You must fill info,
+ * including info.data for a write, done and misc.
+ * For now, no polling interface is provided so you have to use completion
+ * callback.
+ */
+extern int smu_queue_i2c(struct smu_i2c_cmd *cmd);
+
+
+#endif /* __KERNEL__ */
+
+
+/*
+ * - SMU "sdb" partitions informations -
+ */
+
+
+/*
+ * Partition header format
+ */
+struct smu_sdbp_header {
+	__u8	id;
+	__u8	len;
+	__u8	version;
+	__u8	flags;
+};
+
+
+ /*
+ * demangle 16 and 32 bits integer in some SMU partitions
+ * (currently, afaik, this concerns only the FVT partition
+ * (0x12)
+ */
+#define SMU_U16_MIX(x)	le16_to_cpu(x);
+#define SMU_U32_MIX(x)  ((((x) & 0xff00ff00u) >> 8)|(((x) & 0x00ff00ffu) << 8))
+
+
+/* This is the definition of the SMU sdb-partition-0x12 table (called
+ * CPU F/V/T operating points in Darwin). The definition for all those
+ * SMU tables should be moved to some separate file
+ */
+#define SMU_SDB_FVT_ID			0x12
+
+struct smu_sdbp_fvt {
+	__u32	sysclk;			/* Base SysClk frequency in Hz for
+					 * this operating point. Value need to
+					 * be unmixed with SMU_U32_MIX()
+					 */
+	__u8	pad;
+	__u8	maxtemp;		/* Max temp. supported by this
+					 * operating point
+					 */
+
+	__u16	volts[3];		/* CPU core voltage for the 3
+					 * PowerTune modes, a mode with
+					 * 0V = not supported. Value need
+					 * to be unmixed with SMU_U16_MIX()
+					 */
+};
+
+/* This partition contains voltage & current sensor calibration
+ * informations
+ */
+#define SMU_SDB_CPUVCP_ID		0x21
+
+struct smu_sdbp_cpuvcp {
+	__u16	volt_scale;		/* u4.12 fixed point */
+	__s16	volt_offset;		/* s4.12 fixed point */
+	__u16	curr_scale;		/* u4.12 fixed point */
+	__s16	curr_offset;		/* s4.12 fixed point */
+	__s32	power_quads[3];		/* s4.28 fixed point */
+};
+
+/* This partition contains CPU thermal diode calibration
+ */
+#define SMU_SDB_CPUDIODE_ID		0x18
+
+struct smu_sdbp_cpudiode {
+	__u16	m_value;		/* u1.15 fixed point */
+	__s16	b_value;		/* s10.6 fixed point */
+
+};
+
+/* This partition contains Slots power calibration
+ */
+#define SMU_SDB_SLOTSPOW_ID		0x78
+
+struct smu_sdbp_slotspow {
+	__u16	pow_scale;		/* u4.12 fixed point */
+	__s16	pow_offset;		/* s4.12 fixed point */
+};
+
+/* This partition contains machine specific version information about
+ * the sensor/control layout
+ */
+#define SMU_SDB_SENSORTREE_ID		0x25
+
+struct smu_sdbp_sensortree {
+	__u8	model_id;
+	__u8	unknown[3];
+};
+
+/* This partition contains CPU thermal control PID informations. So far
+ * only single CPU machines have been seen with an SMU, so we assume this
+ * carries only informations for those
+ */
+#define SMU_SDB_CPUPIDDATA_ID		0x17
+
+struct smu_sdbp_cpupiddata {
+	__u8	unknown1;
+	__u8	target_temp_delta;
+	__u8	unknown2;
+	__u8	history_len;
+	__s16	power_adj;
+	__u16	max_power;
+	__s32	gp,gr,gd;
+};
+
+
+/* Other partitions without known structures */
+#define SMU_SDB_DEBUG_SWITCHES_ID	0x05
+
+#ifdef __KERNEL__
+/*
+ * This returns the pointer to an SMU "sdb" partition data or NULL
+ * if not found. The data format is described below
+ */
+extern const struct smu_sdbp_header *smu_get_sdb_partition(int id,
+					unsigned int *size);
+
+/* Get "sdb" partition data from an SMU satellite */
+extern struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id,
+					int id, unsigned int *size);
+
+
+#endif /* __KERNEL__ */
+
+
+/*
+ * - Userland interface -
+ */
+
+/*
+ * A given instance of the device can be configured for 2 different
+ * things at the moment:
+ *
+ *  - sending SMU commands (default at open() time)
+ *  - receiving SMU events (not yet implemented)
+ *
+ * Commands are written with write() of a command block. They can be
+ * "driver" commands (for example to switch to event reception mode)
+ * or real SMU commands. They are made of a header followed by command
+ * data if any.
+ *
+ * For SMU commands (not for driver commands), you can then read() back
+ * a reply. The reader will be blocked or not depending on how the device
+ * file is opened. poll() isn't implemented yet. The reply will consist
+ * of a header as well, followed by the reply data if any. You should
+ * always provide a buffer large enough for the maximum reply data, I
+ * recommand one page.
+ *
+ * It is illegal to send SMU commands through a file descriptor configured
+ * for events reception
+ *
+ */
+struct smu_user_cmd_hdr
+{
+	__u32		cmdtype;
+#define SMU_CMDTYPE_SMU			0	/* SMU command */
+#define SMU_CMDTYPE_WANTS_EVENTS	1	/* switch fd to events mode */
+#define SMU_CMDTYPE_GET_PARTITION	2	/* retrieve an sdb partition */
+
+	__u8		cmd;			/* SMU command byte */
+	__u8		pad[3];			/* padding */
+	__u32		data_len;		/* Length of data following */
+};
+
+struct smu_user_reply_hdr
+{
+	__u32		status;			/* Command status */
+	__u32		reply_len;		/* Length of data follwing */
+};
+
+#endif /*  _SMU_H */
diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h
new file mode 100644
index 000000000000..f5a4e168e498
--- /dev/null
+++ b/arch/powerpc/include/asm/socket.h
@@ -0,0 +1,64 @@
+#ifndef _ASM_POWERPC_SOCKET_H
+#define _ASM_POWERPC_SOCKET_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_RCVLOWAT	16
+#define SO_SNDLOWAT	17
+#define SO_RCVTIMEO	18
+#define SO_SNDTIMEO	19
+#define SO_PASSCRED	20
+#define SO_PEERCRED	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER	26
+#define SO_DETACH_FILTER	27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#endif	/* _ASM_POWERPC_SOCKET_H */
diff --git a/arch/powerpc/include/asm/sockios.h b/arch/powerpc/include/asm/sockios.h
new file mode 100644
index 000000000000..55cef7675a31
--- /dev/null
+++ b/arch/powerpc/include/asm/sockios.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_POWERPC_SOCKIOS_H
+#define _ASM_POWERPC_SOCKIOS_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif	/* _ASM_POWERPC_SOCKIOS_H */
diff --git a/arch/powerpc/include/asm/sparsemem.h b/arch/powerpc/include/asm/sparsemem.h
new file mode 100644
index 000000000000..54a47ea2c3aa
--- /dev/null
+++ b/arch/powerpc/include/asm/sparsemem.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_POWERPC_SPARSEMEM_H
+#define _ASM_POWERPC_SPARSEMEM_H 1
+#ifdef __KERNEL__
+
+#ifdef CONFIG_SPARSEMEM
+/*
+ * SECTION_SIZE_BITS		2^N: how big each section will be
+ * MAX_PHYSADDR_BITS		2^N: how much physical address space we have
+ * MAX_PHYSMEM_BITS		2^N: how much memory we can have in that space
+ */
+#define SECTION_SIZE_BITS       24
+
+#define MAX_PHYSADDR_BITS       44
+#define MAX_PHYSMEM_BITS        44
+
+#endif /* CONFIG_SPARSEMEM */
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+extern void create_section_mapping(unsigned long start, unsigned long end);
+extern int remove_section_mapping(unsigned long start, unsigned long end);
+#ifdef CONFIG_NUMA
+extern int hot_add_scn_to_nid(unsigned long scn_addr);
+#else
+static inline int hot_add_scn_to_nid(unsigned long scn_addr)
+{
+	return 0;
+}
+#endif /* CONFIG_NUMA */
+#endif /* CONFIG_MEMORY_HOTPLUG */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SPARSEMEM_H */
diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h
new file mode 100644
index 000000000000..f56a843f4705
--- /dev/null
+++ b/arch/powerpc/include/asm/spinlock.h
@@ -0,0 +1,295 @@
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+#ifdef __KERNEL__
+
+/*
+ * Simple spin lock operations.  
+ *
+ * Copyright (C) 2001-2004 Paul Mackerras <paulus@au.ibm.com>, IBM
+ * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
+ * Copyright (C) 2002 Dave Engebretsen <engebret@us.ibm.com>, IBM
+ *	Rework to support virtual processors
+ *
+ * Type of int is used as a full 64b word is not necessary.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * (the type definitions are in asm/spinlock_types.h)
+ */
+#include <linux/irqflags.h>
+#ifdef CONFIG_PPC64
+#include <asm/paca.h>
+#include <asm/hvcall.h>
+#include <asm/iseries/hv_call.h>
+#endif
+#include <asm/asm-compat.h>
+#include <asm/synch.h>
+
+#define __raw_spin_is_locked(x)		((x)->slock != 0)
+
+#ifdef CONFIG_PPC64
+/* use 0x800000yy when locked, where yy == CPU number */
+#define LOCK_TOKEN	(*(u32 *)(&get_paca()->lock_token))
+#else
+#define LOCK_TOKEN	1
+#endif
+
+#if defined(CONFIG_PPC64) && defined(CONFIG_SMP)
+#define CLEAR_IO_SYNC	(get_paca()->io_sync = 0)
+#define SYNC_IO		do {						\
+				if (unlikely(get_paca()->io_sync)) {	\
+					mb();				\
+					get_paca()->io_sync = 0;	\
+				}					\
+			} while (0)
+#else
+#define CLEAR_IO_SYNC
+#define SYNC_IO
+#endif
+
+/*
+ * This returns the old value in the lock, so we succeeded
+ * in getting the lock if the return value is 0.
+ */
+static inline unsigned long __spin_trylock(raw_spinlock_t *lock)
+{
+	unsigned long tmp, token;
+
+	token = LOCK_TOKEN;
+	__asm__ __volatile__(
+"1:	lwarx		%0,0,%2\n\
+	cmpwi		0,%0,0\n\
+	bne-		2f\n\
+	stwcx.		%1,0,%2\n\
+	bne-		1b\n\
+	isync\n\
+2:"	: "=&r" (tmp)
+	: "r" (token), "r" (&lock->slock)
+	: "cr0", "memory");
+
+	return tmp;
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	CLEAR_IO_SYNC;
+	return __spin_trylock(lock) == 0;
+}
+
+/*
+ * On a system with shared processors (that is, where a physical
+ * processor is multiplexed between several virtual processors),
+ * there is no point spinning on a lock if the holder of the lock
+ * isn't currently scheduled on a physical processor.  Instead
+ * we detect this situation and ask the hypervisor to give the
+ * rest of our timeslice to the lock holder.
+ *
+ * So that we can tell which virtual processor is holding a lock,
+ * we put 0x80000000 | smp_processor_id() in the lock when it is
+ * held.  Conveniently, we have a word in the paca that holds this
+ * value.
+ */
+
+#if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES)
+/* We only yield to the hypervisor if we are in shared processor mode */
+#define SHARED_PROCESSOR (get_lppaca()->shared_proc)
+extern void __spin_yield(raw_spinlock_t *lock);
+extern void __rw_yield(raw_rwlock_t *lock);
+#else /* SPLPAR || ISERIES */
+#define __spin_yield(x)	barrier()
+#define __rw_yield(x)	barrier()
+#define SHARED_PROCESSOR	0
+#endif
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	CLEAR_IO_SYNC;
+	while (1) {
+		if (likely(__spin_trylock(lock) == 0))
+			break;
+		do {
+			HMT_low();
+			if (SHARED_PROCESSOR)
+				__spin_yield(lock);
+		} while (unlikely(lock->slock != 0));
+		HMT_medium();
+	}
+}
+
+static inline
+void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
+{
+	unsigned long flags_dis;
+
+	CLEAR_IO_SYNC;
+	while (1) {
+		if (likely(__spin_trylock(lock) == 0))
+			break;
+		local_save_flags(flags_dis);
+		local_irq_restore(flags);
+		do {
+			HMT_low();
+			if (SHARED_PROCESSOR)
+				__spin_yield(lock);
+		} while (unlikely(lock->slock != 0));
+		HMT_medium();
+		local_irq_restore(flags_dis);
+	}
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	SYNC_IO;
+	__asm__ __volatile__("# __raw_spin_unlock\n\t"
+				LWSYNC_ON_SMP: : :"memory");
+	lock->slock = 0;
+}
+
+#ifdef CONFIG_PPC64
+extern void __raw_spin_unlock_wait(raw_spinlock_t *lock);
+#else
+#define __raw_spin_unlock_wait(lock) \
+	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+#endif
+
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+
+#define __raw_read_can_lock(rw)		((rw)->lock >= 0)
+#define __raw_write_can_lock(rw)	(!(rw)->lock)
+
+#ifdef CONFIG_PPC64
+#define __DO_SIGN_EXTEND	"extsw	%0,%0\n"
+#define WRLOCK_TOKEN		LOCK_TOKEN	/* it's negative */
+#else
+#define __DO_SIGN_EXTEND
+#define WRLOCK_TOKEN		(-1)
+#endif
+
+/*
+ * This returns the old value in the lock + 1,
+ * so we got a read lock if the return value is > 0.
+ */
+static inline long __read_trylock(raw_rwlock_t *rw)
+{
+	long tmp;
+
+	__asm__ __volatile__(
+"1:	lwarx		%0,0,%1\n"
+	__DO_SIGN_EXTEND
+"	addic.		%0,%0,1\n\
+	ble-		2f\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.		%0,0,%1\n\
+	bne-		1b\n\
+	isync\n\
+2:"	: "=&r" (tmp)
+	: "r" (&rw->lock)
+	: "cr0", "xer", "memory");
+
+	return tmp;
+}
+
+/*
+ * This returns the old value in the lock,
+ * so we got the write lock if the return value is 0.
+ */
+static inline long __write_trylock(raw_rwlock_t *rw)
+{
+	long tmp, token;
+
+	token = WRLOCK_TOKEN;
+	__asm__ __volatile__(
+"1:	lwarx		%0,0,%2\n\
+	cmpwi		0,%0,0\n\
+	bne-		2f\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.		%1,0,%2\n\
+	bne-		1b\n\
+	isync\n\
+2:"	: "=&r" (tmp)
+	: "r" (token), "r" (&rw->lock)
+	: "cr0", "memory");
+
+	return tmp;
+}
+
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+	while (1) {
+		if (likely(__read_trylock(rw) > 0))
+			break;
+		do {
+			HMT_low();
+			if (SHARED_PROCESSOR)
+				__rw_yield(rw);
+		} while (unlikely(rw->lock < 0));
+		HMT_medium();
+	}
+}
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+	while (1) {
+		if (likely(__write_trylock(rw) == 0))
+			break;
+		do {
+			HMT_low();
+			if (SHARED_PROCESSOR)
+				__rw_yield(rw);
+		} while (unlikely(rw->lock != 0));
+		HMT_medium();
+	}
+}
+
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+	return __read_trylock(rw) > 0;
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+	return __write_trylock(rw) == 0;
+}
+
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+	long tmp;
+
+	__asm__ __volatile__(
+	"# read_unlock\n\t"
+	LWSYNC_ON_SMP
+"1:	lwarx		%0,0,%1\n\
+	addic		%0,%0,-1\n"
+	PPC405_ERR77(0,%1)
+"	stwcx.		%0,0,%1\n\
+	bne-		1b"
+	: "=&r"(tmp)
+	: "r"(&rw->lock)
+	: "cr0", "memory");
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+	__asm__ __volatile__("# write_unlock\n\t"
+				LWSYNC_ON_SMP: : :"memory");
+	rw->lock = 0;
+}
+
+#define _raw_spin_relax(lock)	__spin_yield(lock)
+#define _raw_read_relax(lock)	__rw_yield(lock)
+#define _raw_write_relax(lock)	__rw_yield(lock)
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SPINLOCK_H */
diff --git a/arch/powerpc/include/asm/spinlock_types.h b/arch/powerpc/include/asm/spinlock_types.h
new file mode 100644
index 000000000000..74236c9f05b1
--- /dev/null
+++ b/arch/powerpc/include/asm/spinlock_types.h
@@ -0,0 +1,20 @@
+#ifndef _ASM_POWERPC_SPINLOCK_TYPES_H
+#define _ASM_POWERPC_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	volatile unsigned int slock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	volatile signed int lock;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
+
+#endif
diff --git a/arch/powerpc/include/asm/spu.h b/arch/powerpc/include/asm/spu.h
new file mode 100644
index 000000000000..8b2eb044270a
--- /dev/null
+++ b/arch/powerpc/include/asm/spu.h
@@ -0,0 +1,732 @@
+/*
+ * SPU core / file system interface and HW structures
+ *
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
+ *
+ * Author: Arnd Bergmann <arndb@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPU_H
+#define _SPU_H
+#ifdef __KERNEL__
+
+#include <linux/workqueue.h>
+#include <linux/sysdev.h>
+
+#define LS_SIZE (256 * 1024)
+#define LS_ADDR_MASK (LS_SIZE - 1)
+
+#define MFC_PUT_CMD             0x20
+#define MFC_PUTS_CMD            0x28
+#define MFC_PUTR_CMD            0x30
+#define MFC_PUTF_CMD            0x22
+#define MFC_PUTB_CMD            0x21
+#define MFC_PUTFS_CMD           0x2A
+#define MFC_PUTBS_CMD           0x29
+#define MFC_PUTRF_CMD           0x32
+#define MFC_PUTRB_CMD           0x31
+#define MFC_PUTL_CMD            0x24
+#define MFC_PUTRL_CMD           0x34
+#define MFC_PUTLF_CMD           0x26
+#define MFC_PUTLB_CMD           0x25
+#define MFC_PUTRLF_CMD          0x36
+#define MFC_PUTRLB_CMD          0x35
+
+#define MFC_GET_CMD             0x40
+#define MFC_GETS_CMD            0x48
+#define MFC_GETF_CMD            0x42
+#define MFC_GETB_CMD            0x41
+#define MFC_GETFS_CMD           0x4A
+#define MFC_GETBS_CMD           0x49
+#define MFC_GETL_CMD            0x44
+#define MFC_GETLF_CMD           0x46
+#define MFC_GETLB_CMD           0x45
+
+#define MFC_SDCRT_CMD           0x80
+#define MFC_SDCRTST_CMD         0x81
+#define MFC_SDCRZ_CMD           0x89
+#define MFC_SDCRS_CMD           0x8D
+#define MFC_SDCRF_CMD           0x8F
+
+#define MFC_GETLLAR_CMD         0xD0
+#define MFC_PUTLLC_CMD          0xB4
+#define MFC_PUTLLUC_CMD         0xB0
+#define MFC_PUTQLLUC_CMD        0xB8
+#define MFC_SNDSIG_CMD          0xA0
+#define MFC_SNDSIGB_CMD         0xA1
+#define MFC_SNDSIGF_CMD         0xA2
+#define MFC_BARRIER_CMD         0xC0
+#define MFC_EIEIO_CMD           0xC8
+#define MFC_SYNC_CMD            0xCC
+
+#define MFC_MIN_DMA_SIZE_SHIFT  4       /* 16 bytes */
+#define MFC_MAX_DMA_SIZE_SHIFT  14      /* 16384 bytes */
+#define MFC_MIN_DMA_SIZE        (1 << MFC_MIN_DMA_SIZE_SHIFT)
+#define MFC_MAX_DMA_SIZE        (1 << MFC_MAX_DMA_SIZE_SHIFT)
+#define MFC_MIN_DMA_SIZE_MASK   (MFC_MIN_DMA_SIZE - 1)
+#define MFC_MAX_DMA_SIZE_MASK   (MFC_MAX_DMA_SIZE - 1)
+#define MFC_MIN_DMA_LIST_SIZE   0x0008  /*   8 bytes */
+#define MFC_MAX_DMA_LIST_SIZE   0x4000  /* 16K bytes */
+
+#define MFC_TAGID_TO_TAGMASK(tag_id)  (1 << (tag_id & 0x1F))
+
+/* Events for Channels 0-2 */
+#define MFC_DMA_TAG_STATUS_UPDATE_EVENT     0x00000001
+#define MFC_DMA_TAG_CMD_STALL_NOTIFY_EVENT  0x00000002
+#define MFC_DMA_QUEUE_AVAILABLE_EVENT       0x00000008
+#define MFC_SPU_MAILBOX_WRITTEN_EVENT       0x00000010
+#define MFC_DECREMENTER_EVENT               0x00000020
+#define MFC_PU_INT_MAILBOX_AVAILABLE_EVENT  0x00000040
+#define MFC_PU_MAILBOX_AVAILABLE_EVENT      0x00000080
+#define MFC_SIGNAL_2_EVENT                  0x00000100
+#define MFC_SIGNAL_1_EVENT                  0x00000200
+#define MFC_LLR_LOST_EVENT                  0x00000400
+#define MFC_PRIV_ATTN_EVENT                 0x00000800
+#define MFC_MULTI_SRC_EVENT                 0x00001000
+
+/* Flag indicating progress during context switch. */
+#define SPU_CONTEXT_SWITCH_PENDING	0UL
+#define SPU_CONTEXT_FAULT_PENDING	1UL
+
+struct spu_context;
+struct spu_runqueue;
+struct spu_lscsa;
+struct device_node;
+
+enum spu_utilization_state {
+	SPU_UTIL_USER,
+	SPU_UTIL_SYSTEM,
+	SPU_UTIL_IOWAIT,
+	SPU_UTIL_IDLE_LOADED,
+	SPU_UTIL_MAX
+};
+
+struct spu {
+	const char *name;
+	unsigned long local_store_phys;
+	u8 *local_store;
+	unsigned long problem_phys;
+	struct spu_problem __iomem *problem;
+	struct spu_priv2 __iomem *priv2;
+	struct list_head cbe_list;
+	struct list_head full_list;
+	enum { SPU_FREE, SPU_USED } alloc_state;
+	int number;
+	unsigned int irqs[3];
+	u32 node;
+	u64 flags;
+	u64 class_0_pending;
+	u64 class_0_dar;
+	u64 class_1_dar;
+	u64 class_1_dsisr;
+	size_t ls_size;
+	unsigned int slb_replace;
+	struct mm_struct *mm;
+	struct spu_context *ctx;
+	struct spu_runqueue *rq;
+	unsigned long long timestamp;
+	pid_t pid;
+	pid_t tgid;
+	spinlock_t register_lock;
+
+	void (* wbox_callback)(struct spu *spu);
+	void (* ibox_callback)(struct spu *spu);
+	void (* stop_callback)(struct spu *spu, int irq);
+	void (* mfc_callback)(struct spu *spu);
+
+	char irq_c0[8];
+	char irq_c1[8];
+	char irq_c2[8];
+
+	u64 spe_id;
+
+	void* pdata; /* platform private data */
+
+	/* of based platforms only */
+	struct device_node *devnode;
+
+	/* native only */
+	struct spu_priv1 __iomem *priv1;
+
+	/* beat only */
+	u64 shadow_int_mask_RW[3];
+
+	struct sys_device sysdev;
+
+	int has_mem_affinity;
+	struct list_head aff_list;
+
+	struct {
+		/* protected by interrupt reentrancy */
+		enum spu_utilization_state util_state;
+		unsigned long long tstamp;
+		unsigned long long times[SPU_UTIL_MAX];
+		unsigned long long vol_ctx_switch;
+		unsigned long long invol_ctx_switch;
+		unsigned long long min_flt;
+		unsigned long long maj_flt;
+		unsigned long long hash_flt;
+		unsigned long long slb_flt;
+		unsigned long long class2_intr;
+		unsigned long long libassist;
+	} stats;
+};
+
+struct cbe_spu_info {
+	struct mutex list_mutex;
+	struct list_head spus;
+	int n_spus;
+	int nr_active;
+	atomic_t busy_spus;
+	atomic_t reserved_spus;
+};
+
+extern struct cbe_spu_info cbe_spu_info[];
+
+void spu_init_channels(struct spu *spu);
+void spu_irq_setaffinity(struct spu *spu, int cpu);
+
+void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa,
+		void *code, int code_size);
+
+#ifdef CONFIG_KEXEC
+void crash_register_spus(struct list_head *list);
+#else
+static inline void crash_register_spus(struct list_head *list)
+{
+}
+#endif
+
+extern void spu_invalidate_slbs(struct spu *spu);
+extern void spu_associate_mm(struct spu *spu, struct mm_struct *mm);
+int spu_64k_pages_available(void);
+
+/* Calls from the memory management to the SPU */
+struct mm_struct;
+extern void spu_flush_all_slbs(struct mm_struct *mm);
+
+/* This interface allows a profiler (e.g., OProfile) to store a ref
+ * to spu context information that it creates.	This caching technique
+ * avoids the need to recreate this information after a save/restore operation.
+ *
+ * Assumes the caller has already incremented the ref count to
+ * profile_info; then spu_context_destroy must call kref_put
+ * on prof_info_kref.
+ */
+void spu_set_profile_private_kref(struct spu_context *ctx,
+				  struct kref *prof_info_kref,
+				  void ( * prof_info_release) (struct kref *kref));
+
+void *spu_get_profile_private_kref(struct spu_context *ctx);
+
+/* system callbacks from the SPU */
+struct spu_syscall_block {
+	u64 nr_ret;
+	u64 parm[6];
+};
+extern long spu_sys_callback(struct spu_syscall_block *s);
+
+/* syscalls implemented in spufs */
+struct file;
+struct spufs_calls {
+	long (*create_thread)(const char __user *name,
+					unsigned int flags, mode_t mode,
+					struct file *neighbor);
+	long (*spu_run)(struct file *filp, __u32 __user *unpc,
+						__u32 __user *ustatus);
+	int (*coredump_extra_notes_size)(void);
+	int (*coredump_extra_notes_write)(struct file *file, loff_t *foffset);
+	void (*notify_spus_active)(void);
+	struct module *owner;
+};
+
+/* return status from spu_run, same as in libspe */
+#define SPE_EVENT_DMA_ALIGNMENT		0x0008	/*A DMA alignment error */
+#define SPE_EVENT_SPE_ERROR		0x0010	/*An illegal instruction error*/
+#define SPE_EVENT_SPE_DATA_SEGMENT	0x0020	/*A DMA segmentation error    */
+#define SPE_EVENT_SPE_DATA_STORAGE	0x0040	/*A DMA storage error */
+#define SPE_EVENT_INVALID_DMA		0x0800	/* Invalid MFC DMA */
+
+/*
+ * Flags for sys_spu_create.
+ */
+#define SPU_CREATE_EVENTS_ENABLED	0x0001
+#define SPU_CREATE_GANG			0x0002
+#define SPU_CREATE_NOSCHED		0x0004
+#define SPU_CREATE_ISOLATE		0x0008
+#define SPU_CREATE_AFFINITY_SPU		0x0010
+#define SPU_CREATE_AFFINITY_MEM		0x0020
+
+#define SPU_CREATE_FLAG_ALL		0x003f /* mask of all valid flags */
+
+
+int register_spu_syscalls(struct spufs_calls *calls);
+void unregister_spu_syscalls(struct spufs_calls *calls);
+
+int spu_add_sysdev_attr(struct sysdev_attribute *attr);
+void spu_remove_sysdev_attr(struct sysdev_attribute *attr);
+
+int spu_add_sysdev_attr_group(struct attribute_group *attrs);
+void spu_remove_sysdev_attr_group(struct attribute_group *attrs);
+
+int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea,
+		unsigned long dsisr, unsigned *flt);
+
+/*
+ * Notifier blocks:
+ *
+ * oprofile can get notified when a context switch is performed
+ * on an spe. The notifer function that gets called is passed
+ * a pointer to the SPU structure as well as the object-id that
+ * identifies the binary running on that SPU now.
+ *
+ * For a context save, the object-id that is passed is zero,
+ * identifying that the kernel will run from that moment on.
+ *
+ * For a context restore, the object-id is the value written
+ * to object-id spufs file from user space and the notifer
+ * function can assume that spu->ctx is valid.
+ */
+struct notifier_block;
+int spu_switch_event_register(struct notifier_block * n);
+int spu_switch_event_unregister(struct notifier_block * n);
+
+extern void notify_spus_active(void);
+extern void do_notify_spus_active(void);
+
+/*
+ * This defines the Local Store, Problem Area and Privilege Area of an SPU.
+ */
+
+union mfc_tag_size_class_cmd {
+	struct {
+		u16 mfc_size;
+		u16 mfc_tag;
+		u8  pad;
+		u8  mfc_rclassid;
+		u16 mfc_cmd;
+	} u;
+	struct {
+		u32 mfc_size_tag32;
+		u32 mfc_class_cmd32;
+	} by32;
+	u64 all64;
+};
+
+struct mfc_cq_sr {
+	u64 mfc_cq_data0_RW;
+	u64 mfc_cq_data1_RW;
+	u64 mfc_cq_data2_RW;
+	u64 mfc_cq_data3_RW;
+};
+
+struct spu_problem {
+#define MS_SYNC_PENDING         1L
+	u64 spc_mssync_RW;					/* 0x0000 */
+	u8  pad_0x0008_0x3000[0x3000 - 0x0008];
+
+	/* DMA Area */
+	u8  pad_0x3000_0x3004[0x4];				/* 0x3000 */
+	u32 mfc_lsa_W;						/* 0x3004 */
+	u64 mfc_ea_W;						/* 0x3008 */
+	union mfc_tag_size_class_cmd mfc_union_W;			/* 0x3010 */
+	u8  pad_0x3018_0x3104[0xec];				/* 0x3018 */
+	u32 dma_qstatus_R;					/* 0x3104 */
+	u8  pad_0x3108_0x3204[0xfc];				/* 0x3108 */
+	u32 dma_querytype_RW;					/* 0x3204 */
+	u8  pad_0x3208_0x321c[0x14];				/* 0x3208 */
+	u32 dma_querymask_RW;					/* 0x321c */
+	u8  pad_0x3220_0x322c[0xc];				/* 0x3220 */
+	u32 dma_tagstatus_R;					/* 0x322c */
+#define DMA_TAGSTATUS_INTR_ANY	1u
+#define DMA_TAGSTATUS_INTR_ALL	2u
+	u8  pad_0x3230_0x4000[0x4000 - 0x3230]; 		/* 0x3230 */
+
+	/* SPU Control Area */
+	u8  pad_0x4000_0x4004[0x4];				/* 0x4000 */
+	u32 pu_mb_R;						/* 0x4004 */
+	u8  pad_0x4008_0x400c[0x4];				/* 0x4008 */
+	u32 spu_mb_W;						/* 0x400c */
+	u8  pad_0x4010_0x4014[0x4];				/* 0x4010 */
+	u32 mb_stat_R;						/* 0x4014 */
+	u8  pad_0x4018_0x401c[0x4];				/* 0x4018 */
+	u32 spu_runcntl_RW;					/* 0x401c */
+#define SPU_RUNCNTL_STOP	0L
+#define SPU_RUNCNTL_RUNNABLE	1L
+#define SPU_RUNCNTL_ISOLATE	2L
+	u8  pad_0x4020_0x4024[0x4];				/* 0x4020 */
+	u32 spu_status_R;					/* 0x4024 */
+#define SPU_STOP_STATUS_SHIFT           16
+#define SPU_STATUS_STOPPED		0x0
+#define SPU_STATUS_RUNNING		0x1
+#define SPU_STATUS_STOPPED_BY_STOP	0x2
+#define SPU_STATUS_STOPPED_BY_HALT	0x4
+#define SPU_STATUS_WAITING_FOR_CHANNEL	0x8
+#define SPU_STATUS_SINGLE_STEP		0x10
+#define SPU_STATUS_INVALID_INSTR        0x20
+#define SPU_STATUS_INVALID_CH           0x40
+#define SPU_STATUS_ISOLATED_STATE       0x80
+#define SPU_STATUS_ISOLATED_LOAD_STATUS 0x200
+#define SPU_STATUS_ISOLATED_EXIT_STATUS 0x400
+	u8  pad_0x4028_0x402c[0x4];				/* 0x4028 */
+	u32 spu_spe_R;						/* 0x402c */
+	u8  pad_0x4030_0x4034[0x4];				/* 0x4030 */
+	u32 spu_npc_RW;						/* 0x4034 */
+	u8  pad_0x4038_0x14000[0x14000 - 0x4038];		/* 0x4038 */
+
+	/* Signal Notification Area */
+	u8  pad_0x14000_0x1400c[0xc];				/* 0x14000 */
+	u32 signal_notify1;					/* 0x1400c */
+	u8  pad_0x14010_0x1c00c[0x7ffc];			/* 0x14010 */
+	u32 signal_notify2;					/* 0x1c00c */
+} __attribute__ ((aligned(0x20000)));
+
+/* SPU Privilege 2 State Area */
+struct spu_priv2 {
+	/* MFC Registers */
+	u8  pad_0x0000_0x1100[0x1100 - 0x0000]; 		/* 0x0000 */
+
+	/* SLB Management Registers */
+	u8  pad_0x1100_0x1108[0x8];				/* 0x1100 */
+	u64 slb_index_W;					/* 0x1108 */
+#define SLB_INDEX_MASK				0x7L
+	u64 slb_esid_RW;					/* 0x1110 */
+	u64 slb_vsid_RW;					/* 0x1118 */
+#define SLB_VSID_SUPERVISOR_STATE	(0x1ull << 11)
+#define SLB_VSID_SUPERVISOR_STATE_MASK	(0x1ull << 11)
+#define SLB_VSID_PROBLEM_STATE		(0x1ull << 10)
+#define SLB_VSID_PROBLEM_STATE_MASK	(0x1ull << 10)
+#define SLB_VSID_EXECUTE_SEGMENT	(0x1ull << 9)
+#define SLB_VSID_NO_EXECUTE_SEGMENT	(0x1ull << 9)
+#define SLB_VSID_EXECUTE_SEGMENT_MASK	(0x1ull << 9)
+#define SLB_VSID_4K_PAGE		(0x0 << 8)
+#define SLB_VSID_LARGE_PAGE		(0x1ull << 8)
+#define SLB_VSID_PAGE_SIZE_MASK		(0x1ull << 8)
+#define SLB_VSID_CLASS_MASK		(0x1ull << 7)
+#define SLB_VSID_VIRTUAL_PAGE_SIZE_MASK	(0x1ull << 6)
+	u64 slb_invalidate_entry_W;				/* 0x1120 */
+	u64 slb_invalidate_all_W;				/* 0x1128 */
+	u8  pad_0x1130_0x2000[0x2000 - 0x1130]; 		/* 0x1130 */
+
+	/* Context Save / Restore Area */
+	struct mfc_cq_sr spuq[16];				/* 0x2000 */
+	struct mfc_cq_sr puq[8];				/* 0x2200 */
+	u8  pad_0x2300_0x3000[0x3000 - 0x2300]; 		/* 0x2300 */
+
+	/* MFC Control */
+	u64 mfc_control_RW;					/* 0x3000 */
+#define MFC_CNTL_RESUME_DMA_QUEUE		(0ull << 0)
+#define MFC_CNTL_SUSPEND_DMA_QUEUE		(1ull << 0)
+#define MFC_CNTL_SUSPEND_DMA_QUEUE_MASK		(1ull << 0)
+#define MFC_CNTL_SUSPEND_MASK			(1ull << 4)
+#define MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION	(0ull << 8)
+#define MFC_CNTL_SUSPEND_IN_PROGRESS		(1ull << 8)
+#define MFC_CNTL_SUSPEND_COMPLETE		(3ull << 8)
+#define MFC_CNTL_SUSPEND_DMA_STATUS_MASK	(3ull << 8)
+#define MFC_CNTL_DMA_QUEUES_EMPTY		(1ull << 14)
+#define MFC_CNTL_DMA_QUEUES_EMPTY_MASK		(1ull << 14)
+#define MFC_CNTL_PURGE_DMA_REQUEST		(1ull << 15)
+#define MFC_CNTL_PURGE_DMA_IN_PROGRESS		(1ull << 24)
+#define MFC_CNTL_PURGE_DMA_COMPLETE		(3ull << 24)
+#define MFC_CNTL_PURGE_DMA_STATUS_MASK		(3ull << 24)
+#define MFC_CNTL_RESTART_DMA_COMMAND		(1ull << 32)
+#define MFC_CNTL_DMA_COMMAND_REISSUE_PENDING	(1ull << 32)
+#define MFC_CNTL_DMA_COMMAND_REISSUE_STATUS_MASK (1ull << 32)
+#define MFC_CNTL_MFC_PRIVILEGE_STATE		(2ull << 33)
+#define MFC_CNTL_MFC_PROBLEM_STATE		(3ull << 33)
+#define MFC_CNTL_MFC_KEY_PROTECTION_STATE_MASK	(3ull << 33)
+#define MFC_CNTL_DECREMENTER_HALTED		(1ull << 35)
+#define MFC_CNTL_DECREMENTER_RUNNING		(1ull << 40)
+#define MFC_CNTL_DECREMENTER_STATUS_MASK	(1ull << 40)
+	u8  pad_0x3008_0x4000[0x4000 - 0x3008]; 		/* 0x3008 */
+
+	/* Interrupt Mailbox */
+	u64 puint_mb_R;						/* 0x4000 */
+	u8  pad_0x4008_0x4040[0x4040 - 0x4008]; 		/* 0x4008 */
+
+	/* SPU Control */
+	u64 spu_privcntl_RW;					/* 0x4040 */
+#define SPU_PRIVCNTL_MODE_NORMAL		(0x0ull << 0)
+#define SPU_PRIVCNTL_MODE_SINGLE_STEP		(0x1ull << 0)
+#define SPU_PRIVCNTL_MODE_MASK			(0x1ull << 0)
+#define SPU_PRIVCNTL_NO_ATTENTION_EVENT		(0x0ull << 1)
+#define SPU_PRIVCNTL_ATTENTION_EVENT		(0x1ull << 1)
+#define SPU_PRIVCNTL_ATTENTION_EVENT_MASK	(0x1ull << 1)
+#define SPU_PRIVCNT_LOAD_REQUEST_NORMAL		(0x0ull << 2)
+#define SPU_PRIVCNT_LOAD_REQUEST_ENABLE_MASK	(0x1ull << 2)
+	u8  pad_0x4048_0x4058[0x10];				/* 0x4048 */
+	u64 spu_lslr_RW;					/* 0x4058 */
+	u64 spu_chnlcntptr_RW;					/* 0x4060 */
+	u64 spu_chnlcnt_RW;					/* 0x4068 */
+	u64 spu_chnldata_RW;					/* 0x4070 */
+	u64 spu_cfg_RW;						/* 0x4078 */
+	u8  pad_0x4080_0x5000[0x5000 - 0x4080]; 		/* 0x4080 */
+
+	/* PV2_ImplRegs: Implementation-specific privileged-state 2 regs */
+	u64 spu_pm_trace_tag_status_RW;				/* 0x5000 */
+	u64 spu_tag_status_query_RW;				/* 0x5008 */
+#define TAG_STATUS_QUERY_CONDITION_BITS (0x3ull << 32)
+#define TAG_STATUS_QUERY_MASK_BITS (0xffffffffull)
+	u64 spu_cmd_buf1_RW;					/* 0x5010 */
+#define SPU_COMMAND_BUFFER_1_LSA_BITS (0x7ffffull << 32)
+#define SPU_COMMAND_BUFFER_1_EAH_BITS (0xffffffffull)
+	u64 spu_cmd_buf2_RW;					/* 0x5018 */
+#define SPU_COMMAND_BUFFER_2_EAL_BITS ((0xffffffffull) << 32)
+#define SPU_COMMAND_BUFFER_2_TS_BITS (0xffffull << 16)
+#define SPU_COMMAND_BUFFER_2_TAG_BITS (0x3full)
+	u64 spu_atomic_status_RW;				/* 0x5020 */
+} __attribute__ ((aligned(0x20000)));
+
+/* SPU Privilege 1 State Area */
+struct spu_priv1 {
+	/* Control and Configuration Area */
+	u64 mfc_sr1_RW;						/* 0x000 */
+#define MFC_STATE1_LOCAL_STORAGE_DECODE_MASK	0x01ull
+#define MFC_STATE1_BUS_TLBIE_MASK		0x02ull
+#define MFC_STATE1_REAL_MODE_OFFSET_ENABLE_MASK	0x04ull
+#define MFC_STATE1_PROBLEM_STATE_MASK		0x08ull
+#define MFC_STATE1_RELOCATE_MASK		0x10ull
+#define MFC_STATE1_MASTER_RUN_CONTROL_MASK	0x20ull
+#define MFC_STATE1_TABLE_SEARCH_MASK		0x40ull
+	u64 mfc_lpid_RW;					/* 0x008 */
+	u64 spu_idr_RW;						/* 0x010 */
+	u64 mfc_vr_RO;						/* 0x018 */
+#define MFC_VERSION_BITS		(0xffff << 16)
+#define MFC_REVISION_BITS		(0xffff)
+#define MFC_GET_VERSION_BITS(vr)	(((vr) & MFC_VERSION_BITS) >> 16)
+#define MFC_GET_REVISION_BITS(vr)	((vr) & MFC_REVISION_BITS)
+	u64 spu_vr_RO;						/* 0x020 */
+#define SPU_VERSION_BITS		(0xffff << 16)
+#define SPU_REVISION_BITS		(0xffff)
+#define SPU_GET_VERSION_BITS(vr)	(vr & SPU_VERSION_BITS) >> 16
+#define SPU_GET_REVISION_BITS(vr)	(vr & SPU_REVISION_BITS)
+	u8  pad_0x28_0x100[0x100 - 0x28];			/* 0x28 */
+
+	/* Interrupt Area */
+	u64 int_mask_RW[3];					/* 0x100 */
+#define CLASS0_ENABLE_DMA_ALIGNMENT_INTR		0x1L
+#define CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR		0x2L
+#define CLASS0_ENABLE_SPU_ERROR_INTR			0x4L
+#define CLASS0_ENABLE_MFC_FIR_INTR			0x8L
+#define CLASS1_ENABLE_SEGMENT_FAULT_INTR		0x1L
+#define CLASS1_ENABLE_STORAGE_FAULT_INTR		0x2L
+#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_GET_INTR	0x4L
+#define CLASS1_ENABLE_LS_COMPARE_SUSPEND_ON_PUT_INTR	0x8L
+#define CLASS2_ENABLE_MAILBOX_INTR			0x1L
+#define CLASS2_ENABLE_SPU_STOP_INTR			0x2L
+#define CLASS2_ENABLE_SPU_HALT_INTR			0x4L
+#define CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR	0x8L
+#define CLASS2_ENABLE_MAILBOX_THRESHOLD_INTR		0x10L
+	u8  pad_0x118_0x140[0x28];				/* 0x118 */
+	u64 int_stat_RW[3];					/* 0x140 */
+#define CLASS0_DMA_ALIGNMENT_INTR			0x1L
+#define CLASS0_INVALID_DMA_COMMAND_INTR			0x2L
+#define CLASS0_SPU_ERROR_INTR				0x4L
+#define CLASS0_INTR_MASK				0x7L
+#define CLASS1_SEGMENT_FAULT_INTR			0x1L
+#define CLASS1_STORAGE_FAULT_INTR			0x2L
+#define CLASS1_LS_COMPARE_SUSPEND_ON_GET_INTR		0x4L
+#define CLASS1_LS_COMPARE_SUSPEND_ON_PUT_INTR		0x8L
+#define CLASS1_INTR_MASK				0xfL
+#define CLASS2_MAILBOX_INTR				0x1L
+#define CLASS2_SPU_STOP_INTR				0x2L
+#define CLASS2_SPU_HALT_INTR				0x4L
+#define CLASS2_SPU_DMA_TAG_GROUP_COMPLETE_INTR		0x8L
+#define CLASS2_MAILBOX_THRESHOLD_INTR			0x10L
+#define CLASS2_INTR_MASK				0x1fL
+	u8  pad_0x158_0x180[0x28];				/* 0x158 */
+	u64 int_route_RW;					/* 0x180 */
+
+	/* Interrupt Routing */
+	u8  pad_0x188_0x200[0x200 - 0x188];			/* 0x188 */
+
+	/* Atomic Unit Control Area */
+	u64 mfc_atomic_flush_RW;				/* 0x200 */
+#define mfc_atomic_flush_enable			0x1L
+	u8  pad_0x208_0x280[0x78];				/* 0x208 */
+	u64 resource_allocation_groupID_RW;			/* 0x280 */
+	u64 resource_allocation_enable_RW; 			/* 0x288 */
+	u8  pad_0x290_0x3c8[0x3c8 - 0x290];			/* 0x290 */
+
+	/* SPU_Cache_ImplRegs: Implementation-dependent cache registers */
+
+	u64 smf_sbi_signal_sel;					/* 0x3c8 */
+#define smf_sbi_mask_lsb	56
+#define smf_sbi_shift		(63 - smf_sbi_mask_lsb)
+#define smf_sbi_mask		(0x301LL << smf_sbi_shift)
+#define smf_sbi_bus0_bits	(0x001LL << smf_sbi_shift)
+#define smf_sbi_bus2_bits	(0x100LL << smf_sbi_shift)
+#define smf_sbi2_bus0_bits	(0x201LL << smf_sbi_shift)
+#define smf_sbi2_bus2_bits	(0x300LL << smf_sbi_shift)
+	u64 smf_ato_signal_sel;					/* 0x3d0 */
+#define smf_ato_mask_lsb	35
+#define smf_ato_shift		(63 - smf_ato_mask_lsb)
+#define smf_ato_mask		(0x3LL << smf_ato_shift)
+#define smf_ato_bus0_bits	(0x2LL << smf_ato_shift)
+#define smf_ato_bus2_bits	(0x1LL << smf_ato_shift)
+	u8  pad_0x3d8_0x400[0x400 - 0x3d8];			/* 0x3d8 */
+
+	/* TLB Management Registers */
+	u64 mfc_sdr_RW;						/* 0x400 */
+	u8  pad_0x408_0x500[0xf8];				/* 0x408 */
+	u64 tlb_index_hint_RO;					/* 0x500 */
+	u64 tlb_index_W;					/* 0x508 */
+	u64 tlb_vpn_RW;						/* 0x510 */
+	u64 tlb_rpn_RW;						/* 0x518 */
+	u8  pad_0x520_0x540[0x20];				/* 0x520 */
+	u64 tlb_invalidate_entry_W;				/* 0x540 */
+	u64 tlb_invalidate_all_W;				/* 0x548 */
+	u8  pad_0x550_0x580[0x580 - 0x550];			/* 0x550 */
+
+	/* SPU_MMU_ImplRegs: Implementation-dependent MMU registers */
+	u64 smm_hid;						/* 0x580 */
+#define PAGE_SIZE_MASK		0xf000000000000000ull
+#define PAGE_SIZE_16MB_64KB	0x2000000000000000ull
+	u8  pad_0x588_0x600[0x600 - 0x588];			/* 0x588 */
+
+	/* MFC Status/Control Area */
+	u64 mfc_accr_RW;					/* 0x600 */
+#define MFC_ACCR_EA_ACCESS_GET		(1 << 0)
+#define MFC_ACCR_EA_ACCESS_PUT		(1 << 1)
+#define MFC_ACCR_LS_ACCESS_GET		(1 << 3)
+#define MFC_ACCR_LS_ACCESS_PUT		(1 << 4)
+	u8  pad_0x608_0x610[0x8];				/* 0x608 */
+	u64 mfc_dsisr_RW;					/* 0x610 */
+#define MFC_DSISR_PTE_NOT_FOUND		(1 << 30)
+#define MFC_DSISR_ACCESS_DENIED		(1 << 27)
+#define MFC_DSISR_ATOMIC		(1 << 26)
+#define MFC_DSISR_ACCESS_PUT		(1 << 25)
+#define MFC_DSISR_ADDR_MATCH		(1 << 22)
+#define MFC_DSISR_LS			(1 << 17)
+#define MFC_DSISR_L			(1 << 16)
+#define MFC_DSISR_ADDRESS_OVERFLOW	(1 << 0)
+	u8  pad_0x618_0x620[0x8];				/* 0x618 */
+	u64 mfc_dar_RW;						/* 0x620 */
+	u8  pad_0x628_0x700[0x700 - 0x628];			/* 0x628 */
+
+	/* Replacement Management Table (RMT) Area */
+	u64 rmt_index_RW;					/* 0x700 */
+	u8  pad_0x708_0x710[0x8];				/* 0x708 */
+	u64 rmt_data1_RW;					/* 0x710 */
+	u8  pad_0x718_0x800[0x800 - 0x718];			/* 0x718 */
+
+	/* Control/Configuration Registers */
+	u64 mfc_dsir_R;						/* 0x800 */
+#define MFC_DSIR_Q			(1 << 31)
+#define MFC_DSIR_SPU_QUEUE		MFC_DSIR_Q
+	u64 mfc_lsacr_RW;					/* 0x808 */
+#define MFC_LSACR_COMPARE_MASK		((~0ull) << 32)
+#define MFC_LSACR_COMPARE_ADDR		((~0ull) >> 32)
+	u64 mfc_lscrr_R;					/* 0x810 */
+#define MFC_LSCRR_Q			(1 << 31)
+#define MFC_LSCRR_SPU_QUEUE		MFC_LSCRR_Q
+#define MFC_LSCRR_QI_SHIFT		32
+#define MFC_LSCRR_QI_MASK		((~0ull) << MFC_LSCRR_QI_SHIFT)
+	u8  pad_0x818_0x820[0x8];				/* 0x818 */
+	u64 mfc_tclass_id_RW;					/* 0x820 */
+#define MFC_TCLASS_ID_ENABLE		(1L << 0L)
+#define MFC_TCLASS_SLOT2_ENABLE		(1L << 5L)
+#define MFC_TCLASS_SLOT1_ENABLE		(1L << 6L)
+#define MFC_TCLASS_SLOT0_ENABLE		(1L << 7L)
+#define MFC_TCLASS_QUOTA_2_SHIFT	8L
+#define MFC_TCLASS_QUOTA_1_SHIFT	16L
+#define MFC_TCLASS_QUOTA_0_SHIFT	24L
+#define MFC_TCLASS_QUOTA_2_MASK		(0x1FL << MFC_TCLASS_QUOTA_2_SHIFT)
+#define MFC_TCLASS_QUOTA_1_MASK		(0x1FL << MFC_TCLASS_QUOTA_1_SHIFT)
+#define MFC_TCLASS_QUOTA_0_MASK		(0x1FL << MFC_TCLASS_QUOTA_0_SHIFT)
+	u8  pad_0x828_0x900[0x900 - 0x828];			/* 0x828 */
+
+	/* Real Mode Support Registers */
+	u64 mfc_rm_boundary;					/* 0x900 */
+	u8  pad_0x908_0x938[0x30];				/* 0x908 */
+	u64 smf_dma_signal_sel;					/* 0x938 */
+#define mfc_dma1_mask_lsb	41
+#define mfc_dma1_shift		(63 - mfc_dma1_mask_lsb)
+#define mfc_dma1_mask		(0x3LL << mfc_dma1_shift)
+#define mfc_dma1_bits		(0x1LL << mfc_dma1_shift)
+#define mfc_dma2_mask_lsb	43
+#define mfc_dma2_shift		(63 - mfc_dma2_mask_lsb)
+#define mfc_dma2_mask		(0x3LL << mfc_dma2_shift)
+#define mfc_dma2_bits		(0x1LL << mfc_dma2_shift)
+	u8  pad_0x940_0xa38[0xf8];				/* 0x940 */
+	u64 smm_signal_sel;					/* 0xa38 */
+#define smm_sig_mask_lsb	12
+#define smm_sig_shift		(63 - smm_sig_mask_lsb)
+#define smm_sig_mask		(0x3LL << smm_sig_shift)
+#define smm_sig_bus0_bits	(0x2LL << smm_sig_shift)
+#define smm_sig_bus2_bits	(0x1LL << smm_sig_shift)
+	u8  pad_0xa40_0xc00[0xc00 - 0xa40];			/* 0xa40 */
+
+	/* DMA Command Error Area */
+	u64 mfc_cer_R;						/* 0xc00 */
+#define MFC_CER_Q		(1 << 31)
+#define MFC_CER_SPU_QUEUE	MFC_CER_Q
+	u8  pad_0xc08_0x1000[0x1000 - 0xc08];			/* 0xc08 */
+
+	/* PV1_ImplRegs: Implementation-dependent privileged-state 1 regs */
+	/* DMA Command Error Area */
+	u64 spu_ecc_cntl_RW;					/* 0x1000 */
+#define SPU_ECC_CNTL_E			(1ull << 0ull)
+#define SPU_ECC_CNTL_ENABLE		SPU_ECC_CNTL_E
+#define SPU_ECC_CNTL_DISABLE		(~SPU_ECC_CNTL_E & 1L)
+#define SPU_ECC_CNTL_S			(1ull << 1ull)
+#define SPU_ECC_STOP_AFTER_ERROR	SPU_ECC_CNTL_S
+#define SPU_ECC_CONTINUE_AFTER_ERROR	(~SPU_ECC_CNTL_S & 2L)
+#define SPU_ECC_CNTL_B			(1ull << 2ull)
+#define SPU_ECC_BACKGROUND_ENABLE	SPU_ECC_CNTL_B
+#define SPU_ECC_BACKGROUND_DISABLE	(~SPU_ECC_CNTL_B & 4L)
+#define SPU_ECC_CNTL_I_SHIFT		3ull
+#define SPU_ECC_CNTL_I_MASK		(3ull << SPU_ECC_CNTL_I_SHIFT)
+#define SPU_ECC_WRITE_ALWAYS		(~SPU_ECC_CNTL_I & 12L)
+#define SPU_ECC_WRITE_CORRECTABLE	(1ull << SPU_ECC_CNTL_I_SHIFT)
+#define SPU_ECC_WRITE_UNCORRECTABLE	(3ull << SPU_ECC_CNTL_I_SHIFT)
+#define SPU_ECC_CNTL_D			(1ull << 5ull)
+#define SPU_ECC_DETECTION_ENABLE	SPU_ECC_CNTL_D
+#define SPU_ECC_DETECTION_DISABLE	(~SPU_ECC_CNTL_D & 32L)
+	u64 spu_ecc_stat_RW;					/* 0x1008 */
+#define SPU_ECC_CORRECTED_ERROR		(1ull << 0ul)
+#define SPU_ECC_UNCORRECTED_ERROR	(1ull << 1ul)
+#define SPU_ECC_SCRUB_COMPLETE		(1ull << 2ul)
+#define SPU_ECC_SCRUB_IN_PROGRESS	(1ull << 3ul)
+#define SPU_ECC_INSTRUCTION_ERROR	(1ull << 4ul)
+#define SPU_ECC_DATA_ERROR		(1ull << 5ul)
+#define SPU_ECC_DMA_ERROR		(1ull << 6ul)
+#define SPU_ECC_STATUS_CNT_MASK		(256ull << 8)
+	u64 spu_ecc_addr_RW;					/* 0x1010 */
+	u64 spu_err_mask_RW;					/* 0x1018 */
+#define SPU_ERR_ILLEGAL_INSTR		(1ull << 0ul)
+#define SPU_ERR_ILLEGAL_CHANNEL		(1ull << 1ul)
+	u8  pad_0x1020_0x1028[0x1028 - 0x1020];			/* 0x1020 */
+
+	/* SPU Debug-Trace Bus (DTB) Selection Registers */
+	u64 spu_trig0_sel;					/* 0x1028 */
+	u64 spu_trig1_sel;					/* 0x1030 */
+	u64 spu_trig2_sel;					/* 0x1038 */
+	u64 spu_trig3_sel;					/* 0x1040 */
+	u64 spu_trace_sel;					/* 0x1048 */
+#define spu_trace_sel_mask		0x1f1fLL
+#define spu_trace_sel_bus0_bits		0x1000LL
+#define spu_trace_sel_bus2_bits		0x0010LL
+	u64 spu_event0_sel;					/* 0x1050 */
+	u64 spu_event1_sel;					/* 0x1058 */
+	u64 spu_event2_sel;					/* 0x1060 */
+	u64 spu_event3_sel;					/* 0x1068 */
+	u64 spu_trace_cntl;					/* 0x1070 */
+} __attribute__ ((aligned(0x2000)));
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/powerpc/include/asm/spu_csa.h b/arch/powerpc/include/asm/spu_csa.h
new file mode 100644
index 000000000000..a40fd491250c
--- /dev/null
+++ b/arch/powerpc/include/asm/spu_csa.h
@@ -0,0 +1,266 @@
+/*
+ * spu_csa.h: Definitions for SPU context save area (CSA).
+ *
+ * (C) Copyright IBM 2005
+ *
+ * Author: Mark Nutter <mnutter@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPU_CSA_H_
+#define _SPU_CSA_H_
+#ifdef __KERNEL__
+
+/*
+ * Total number of 128-bit registers.
+ */
+#define NR_SPU_GPRS         	128
+#define NR_SPU_SPRS         	9
+#define NR_SPU_REGS_PAD	    	7
+#define NR_SPU_SPILL_REGS   	144	/* GPRS + SPRS + PAD */
+#define SIZEOF_SPU_SPILL_REGS	NR_SPU_SPILL_REGS * 16
+
+#define SPU_SAVE_COMPLETE      	0x3FFB
+#define SPU_RESTORE_COMPLETE   	0x3FFC
+
+/*
+ * Definitions for various 'stopped' status conditions,
+ * to be recreated during context restore.
+ */
+#define SPU_STOPPED_STATUS_P    1
+#define SPU_STOPPED_STATUS_I    2
+#define SPU_STOPPED_STATUS_H    3
+#define SPU_STOPPED_STATUS_S    4
+#define SPU_STOPPED_STATUS_S_I  5
+#define SPU_STOPPED_STATUS_S_P  6
+#define SPU_STOPPED_STATUS_P_H  7
+#define SPU_STOPPED_STATUS_P_I  8
+#define SPU_STOPPED_STATUS_R    9
+
+/*
+ * Definitions for software decrementer status flag.
+ */
+#define SPU_DECR_STATUS_RUNNING 0x1
+#define SPU_DECR_STATUS_WRAPPED 0x2
+
+#ifndef  __ASSEMBLY__
+/**
+ * spu_reg128 - generic 128-bit register definition.
+ */
+struct spu_reg128 {
+	u32 slot[4];
+};
+
+/**
+ * struct spu_lscsa - Local Store Context Save Area.
+ * @gprs: Array of saved registers.
+ * @fpcr: Saved floating point status control register.
+ * @decr: Saved decrementer value.
+ * @decr_status: Indicates software decrementer status flags.
+ * @ppu_mb: Saved PPU mailbox data.
+ * @ppuint_mb: Saved PPU interrupting mailbox data.
+ * @tag_mask: Saved tag group mask.
+ * @event_mask: Saved event mask.
+ * @srr0: Saved SRR0.
+ * @stopped_status: Conditions to be recreated by restore.
+ * @ls: Saved contents of Local Storage Area.
+ *
+ * The LSCSA represents state that is primarily saved and
+ * restored by SPU-side code.
+ */
+struct spu_lscsa {
+	struct spu_reg128 gprs[128];
+	struct spu_reg128 fpcr;
+	struct spu_reg128 decr;
+	struct spu_reg128 decr_status;
+	struct spu_reg128 ppu_mb;
+	struct spu_reg128 ppuint_mb;
+	struct spu_reg128 tag_mask;
+	struct spu_reg128 event_mask;
+	struct spu_reg128 srr0;
+	struct spu_reg128 stopped_status;
+
+	/*
+	 * 'ls' must be page-aligned on all configurations.
+	 * Since we don't want to rely on having the spu-gcc
+	 * installed to build the kernel and this structure
+	 * is used in the SPU-side code, make it 64k-page
+	 * aligned for now.
+	 */
+	unsigned char ls[LS_SIZE] __attribute__((aligned(65536)));
+};
+
+#ifndef __SPU__
+/*
+ * struct spu_problem_collapsed - condensed problem state area, w/o pads.
+ */
+struct spu_problem_collapsed {
+	u64 spc_mssync_RW;
+	u32 mfc_lsa_W;
+	u32 unused_pad0;
+	u64 mfc_ea_W;
+	union mfc_tag_size_class_cmd mfc_union_W;
+	u32 dma_qstatus_R;
+	u32 dma_querytype_RW;
+	u32 dma_querymask_RW;
+	u32 dma_tagstatus_R;
+	u32 pu_mb_R;
+	u32 spu_mb_W;
+	u32 mb_stat_R;
+	u32 spu_runcntl_RW;
+	u32 spu_status_R;
+	u32 spu_spc_R;
+	u32 spu_npc_RW;
+	u32 signal_notify1;
+	u32 signal_notify2;
+	u32 unused_pad1;
+};
+
+/*
+ * struct spu_priv1_collapsed - condensed privileged 1 area, w/o pads.
+ */
+struct spu_priv1_collapsed {
+	u64 mfc_sr1_RW;
+	u64 mfc_lpid_RW;
+	u64 spu_idr_RW;
+	u64 mfc_vr_RO;
+	u64 spu_vr_RO;
+	u64 int_mask_class0_RW;
+	u64 int_mask_class1_RW;
+	u64 int_mask_class2_RW;
+	u64 int_stat_class0_RW;
+	u64 int_stat_class1_RW;
+	u64 int_stat_class2_RW;
+	u64 int_route_RW;
+	u64 mfc_atomic_flush_RW;
+	u64 resource_allocation_groupID_RW;
+	u64 resource_allocation_enable_RW;
+	u64 mfc_fir_R;
+	u64 mfc_fir_status_or_W;
+	u64 mfc_fir_status_and_W;
+	u64 mfc_fir_mask_R;
+	u64 mfc_fir_mask_or_W;
+	u64 mfc_fir_mask_and_W;
+	u64 mfc_fir_chkstp_enable_RW;
+	u64 smf_sbi_signal_sel;
+	u64 smf_ato_signal_sel;
+	u64 tlb_index_hint_RO;
+	u64 tlb_index_W;
+	u64 tlb_vpn_RW;
+	u64 tlb_rpn_RW;
+	u64 tlb_invalidate_entry_W;
+	u64 tlb_invalidate_all_W;
+	u64 smm_hid;
+	u64 mfc_accr_RW;
+	u64 mfc_dsisr_RW;
+	u64 mfc_dar_RW;
+	u64 rmt_index_RW;
+	u64 rmt_data1_RW;
+	u64 mfc_dsir_R;
+	u64 mfc_lsacr_RW;
+	u64 mfc_lscrr_R;
+	u64 mfc_tclass_id_RW;
+	u64 mfc_rm_boundary;
+	u64 smf_dma_signal_sel;
+	u64 smm_signal_sel;
+	u64 mfc_cer_R;
+	u64 pu_ecc_cntl_RW;
+	u64 pu_ecc_stat_RW;
+	u64 spu_ecc_addr_RW;
+	u64 spu_err_mask_RW;
+	u64 spu_trig0_sel;
+	u64 spu_trig1_sel;
+	u64 spu_trig2_sel;
+	u64 spu_trig3_sel;
+	u64 spu_trace_sel;
+	u64 spu_event0_sel;
+	u64 spu_event1_sel;
+	u64 spu_event2_sel;
+	u64 spu_event3_sel;
+	u64 spu_trace_cntl;
+};
+
+/*
+ * struct spu_priv2_collapsed - condensed privileged 2 area, w/o pads.
+ */
+struct spu_priv2_collapsed {
+	u64 slb_index_W;
+	u64 slb_esid_RW;
+	u64 slb_vsid_RW;
+	u64 slb_invalidate_entry_W;
+	u64 slb_invalidate_all_W;
+	struct mfc_cq_sr spuq[16];
+	struct mfc_cq_sr puq[8];
+	u64 mfc_control_RW;
+	u64 puint_mb_R;
+	u64 spu_privcntl_RW;
+	u64 spu_lslr_RW;
+	u64 spu_chnlcntptr_RW;
+	u64 spu_chnlcnt_RW;
+	u64 spu_chnldata_RW;
+	u64 spu_cfg_RW;
+	u64 spu_tag_status_query_RW;
+	u64 spu_cmd_buf1_RW;
+	u64 spu_cmd_buf2_RW;
+	u64 spu_atomic_status_RW;
+};
+
+/**
+ * struct spu_state
+ * @lscsa: Local Store Context Save Area.
+ * @prob: Collapsed Problem State Area, w/o pads.
+ * @priv1: Collapsed Privileged 1 Area, w/o pads.
+ * @priv2: Collapsed Privileged 2 Area, w/o pads.
+ * @spu_chnlcnt_RW: Array of saved channel counts.
+ * @spu_chnldata_RW: Array of saved channel data.
+ * @suspend_time: Time stamp when decrementer disabled.
+ *
+ * Structure representing the whole of the SPU
+ * context save area (CSA).  This struct contains
+ * all of the state necessary to suspend and then
+ * later optionally resume execution of an SPU
+ * context.
+ *
+ * The @lscsa region is by far the largest, and is
+ * allocated separately so that it may either be
+ * pinned or mapped to/from application memory, as
+ * appropriate for the OS environment.
+ */
+struct spu_state {
+	struct spu_lscsa *lscsa;
+#ifdef CONFIG_SPU_FS_64K_LS
+	int		use_big_pages;
+	/* One struct page per 64k page */
+#define SPU_LSCSA_NUM_BIG_PAGES	(sizeof(struct spu_lscsa) / 0x10000)
+	struct page	*lscsa_pages[SPU_LSCSA_NUM_BIG_PAGES];
+#endif
+	struct spu_problem_collapsed prob;
+	struct spu_priv1_collapsed priv1;
+	struct spu_priv2_collapsed priv2;
+	u64 spu_chnlcnt_RW[32];
+	u64 spu_chnldata_RW[32];
+	u32 spu_mailbox_data[4];
+	u32 pu_mailbox_data[1];
+	u64 class_0_dar, class_0_pending;
+	u64 class_1_dar, class_1_dsisr;
+	unsigned long suspend_time;
+	spinlock_t register_lock;
+};
+
+#endif /* !__SPU__ */
+#endif /* __KERNEL__ */
+#endif /* !__ASSEMBLY__ */
+#endif /* _SPU_CSA_H_ */
diff --git a/arch/powerpc/include/asm/spu_info.h b/arch/powerpc/include/asm/spu_info.h
new file mode 100644
index 000000000000..3545efbf9891
--- /dev/null
+++ b/arch/powerpc/include/asm/spu_info.h
@@ -0,0 +1,54 @@
+/*
+ * SPU info structures
+ *
+ * (C) Copyright 2006 IBM Corp.
+ *
+ * Author: Dwayne Grant McConnell <decimal@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _SPU_INFO_H
+#define _SPU_INFO_H
+
+#ifdef __KERNEL__
+#include <asm/spu.h>
+#include <linux/types.h>
+#else
+struct mfc_cq_sr {
+	__u64 mfc_cq_data0_RW;
+	__u64 mfc_cq_data1_RW;
+	__u64 mfc_cq_data2_RW;
+	__u64 mfc_cq_data3_RW;
+};
+#endif /* __KERNEL__ */
+
+struct spu_dma_info {
+	__u64 dma_info_type;
+	__u64 dma_info_mask;
+	__u64 dma_info_status;
+	__u64 dma_info_stall_and_notify;
+	__u64 dma_info_atomic_command_status;
+	struct mfc_cq_sr dma_info_command_data[16];
+};
+
+struct spu_proxydma_info {
+	__u64 proxydma_info_type;
+	__u64 proxydma_info_mask;
+	__u64 proxydma_info_status;
+	struct mfc_cq_sr proxydma_info_command_data[8];
+};
+
+#endif
diff --git a/arch/powerpc/include/asm/spu_priv1.h b/arch/powerpc/include/asm/spu_priv1.h
new file mode 100644
index 000000000000..25020a34ce7f
--- /dev/null
+++ b/arch/powerpc/include/asm/spu_priv1.h
@@ -0,0 +1,236 @@
+/*
+ * Defines an spu hypervisor abstraction layer.
+ *
+ *  Copyright 2006 Sony Corp.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(_SPU_PRIV1_H)
+#define _SPU_PRIV1_H
+#if defined(__KERNEL__)
+
+#include <linux/types.h>
+
+struct spu;
+struct spu_context;
+
+/* access to priv1 registers */
+
+struct spu_priv1_ops {
+	void (*int_mask_and) (struct spu *spu, int class, u64 mask);
+	void (*int_mask_or) (struct spu *spu, int class, u64 mask);
+	void (*int_mask_set) (struct spu *spu, int class, u64 mask);
+	u64 (*int_mask_get) (struct spu *spu, int class);
+	void (*int_stat_clear) (struct spu *spu, int class, u64 stat);
+	u64 (*int_stat_get) (struct spu *spu, int class);
+	void (*cpu_affinity_set) (struct spu *spu, int cpu);
+	u64 (*mfc_dar_get) (struct spu *spu);
+	u64 (*mfc_dsisr_get) (struct spu *spu);
+	void (*mfc_dsisr_set) (struct spu *spu, u64 dsisr);
+	void (*mfc_sdr_setup) (struct spu *spu);
+	void (*mfc_sr1_set) (struct spu *spu, u64 sr1);
+	u64 (*mfc_sr1_get) (struct spu *spu);
+	void (*mfc_tclass_id_set) (struct spu *spu, u64 tclass_id);
+	u64 (*mfc_tclass_id_get) (struct spu *spu);
+	void (*tlb_invalidate) (struct spu *spu);
+	void (*resource_allocation_groupID_set) (struct spu *spu, u64 id);
+	u64 (*resource_allocation_groupID_get) (struct spu *spu);
+	void (*resource_allocation_enable_set) (struct spu *spu, u64 enable);
+	u64 (*resource_allocation_enable_get) (struct spu *spu);
+};
+
+extern const struct spu_priv1_ops* spu_priv1_ops;
+
+static inline void
+spu_int_mask_and (struct spu *spu, int class, u64 mask)
+{
+	spu_priv1_ops->int_mask_and(spu, class, mask);
+}
+
+static inline void
+spu_int_mask_or (struct spu *spu, int class, u64 mask)
+{
+	spu_priv1_ops->int_mask_or(spu, class, mask);
+}
+
+static inline void
+spu_int_mask_set (struct spu *spu, int class, u64 mask)
+{
+	spu_priv1_ops->int_mask_set(spu, class, mask);
+}
+
+static inline u64
+spu_int_mask_get (struct spu *spu, int class)
+{
+	return spu_priv1_ops->int_mask_get(spu, class);
+}
+
+static inline void
+spu_int_stat_clear (struct spu *spu, int class, u64 stat)
+{
+	spu_priv1_ops->int_stat_clear(spu, class, stat);
+}
+
+static inline u64
+spu_int_stat_get (struct spu *spu, int class)
+{
+	return spu_priv1_ops->int_stat_get (spu, class);
+}
+
+static inline void
+spu_cpu_affinity_set (struct spu *spu, int cpu)
+{
+	spu_priv1_ops->cpu_affinity_set(spu, cpu);
+}
+
+static inline u64
+spu_mfc_dar_get (struct spu *spu)
+{
+	return spu_priv1_ops->mfc_dar_get(spu);
+}
+
+static inline u64
+spu_mfc_dsisr_get (struct spu *spu)
+{
+	return spu_priv1_ops->mfc_dsisr_get(spu);
+}
+
+static inline void
+spu_mfc_dsisr_set (struct spu *spu, u64 dsisr)
+{
+	spu_priv1_ops->mfc_dsisr_set(spu, dsisr);
+}
+
+static inline void
+spu_mfc_sdr_setup (struct spu *spu)
+{
+	spu_priv1_ops->mfc_sdr_setup(spu);
+}
+
+static inline void
+spu_mfc_sr1_set (struct spu *spu, u64 sr1)
+{
+	spu_priv1_ops->mfc_sr1_set(spu, sr1);
+}
+
+static inline u64
+spu_mfc_sr1_get (struct spu *spu)
+{
+	return spu_priv1_ops->mfc_sr1_get(spu);
+}
+
+static inline void
+spu_mfc_tclass_id_set (struct spu *spu, u64 tclass_id)
+{
+	spu_priv1_ops->mfc_tclass_id_set(spu, tclass_id);
+}
+
+static inline u64
+spu_mfc_tclass_id_get (struct spu *spu)
+{
+	return spu_priv1_ops->mfc_tclass_id_get(spu);
+}
+
+static inline void
+spu_tlb_invalidate (struct spu *spu)
+{
+	spu_priv1_ops->tlb_invalidate(spu);
+}
+
+static inline void
+spu_resource_allocation_groupID_set (struct spu *spu, u64 id)
+{
+	spu_priv1_ops->resource_allocation_groupID_set(spu, id);
+}
+
+static inline u64
+spu_resource_allocation_groupID_get (struct spu *spu)
+{
+	return spu_priv1_ops->resource_allocation_groupID_get(spu);
+}
+
+static inline void
+spu_resource_allocation_enable_set (struct spu *spu, u64 enable)
+{
+	spu_priv1_ops->resource_allocation_enable_set(spu, enable);
+}
+
+static inline u64
+spu_resource_allocation_enable_get (struct spu *spu)
+{
+	return spu_priv1_ops->resource_allocation_enable_get(spu);
+}
+
+/* spu management abstraction */
+
+struct spu_management_ops {
+	int (*enumerate_spus)(int (*fn)(void *data));
+	int (*create_spu)(struct spu *spu, void *data);
+	int (*destroy_spu)(struct spu *spu);
+	void (*enable_spu)(struct spu_context *ctx);
+	void (*disable_spu)(struct spu_context *ctx);
+	int (*init_affinity)(void);
+};
+
+extern const struct spu_management_ops* spu_management_ops;
+
+static inline int
+spu_enumerate_spus (int (*fn)(void *data))
+{
+	return spu_management_ops->enumerate_spus(fn);
+}
+
+static inline int
+spu_create_spu (struct spu *spu, void *data)
+{
+	return spu_management_ops->create_spu(spu, data);
+}
+
+static inline int
+spu_destroy_spu (struct spu *spu)
+{
+	return spu_management_ops->destroy_spu(spu);
+}
+
+static inline int
+spu_init_affinity (void)
+{
+	return spu_management_ops->init_affinity();
+}
+
+static inline void
+spu_enable_spu (struct spu_context *ctx)
+{
+	spu_management_ops->enable_spu(ctx);
+}
+
+static inline void
+spu_disable_spu (struct spu_context *ctx)
+{
+	spu_management_ops->disable_spu(ctx);
+}
+
+/*
+ * The declarations folowing are put here for convenience
+ * and only intended to be used by the platform setup code.
+ */
+
+extern const struct spu_priv1_ops spu_priv1_mmio_ops;
+extern const struct spu_priv1_ops spu_priv1_beat_ops;
+
+extern const struct spu_management_ops spu_management_of_ops;
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/powerpc/include/asm/sstep.h b/arch/powerpc/include/asm/sstep.h
new file mode 100644
index 000000000000..f593b0f9b627
--- /dev/null
+++ b/arch/powerpc/include/asm/sstep.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2004 Paul Mackerras <paulus@au.ibm.com>, IBM
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+struct pt_regs;
+
+/*
+ * We don't allow single-stepping an mtmsrd that would clear
+ * MSR_RI, since that would make the exception unrecoverable.
+ * Since we need to single-step to proceed from a breakpoint,
+ * we don't allow putting a breakpoint on an mtmsrd instruction.
+ * Similarly we don't allow breakpoints on rfid instructions.
+ * These macros tell us if an instruction is a mtmsrd or rfid.
+ * Note that IS_MTMSRD returns true for both an mtmsr (32-bit)
+ * and an mtmsrd (64-bit).
+ */
+#define IS_MTMSRD(instr)	(((instr) & 0xfc0007be) == 0x7c000124)
+#define IS_RFID(instr)		(((instr) & 0xfc0007fe) == 0x4c000024)
+#define IS_RFI(instr)		(((instr) & 0xfc0007fe) == 0x4c000064)
+
+/* Emulate instructions that cause a transfer of control. */
+extern int emulate_step(struct pt_regs *regs, unsigned int instr);
diff --git a/arch/powerpc/include/asm/stat.h b/arch/powerpc/include/asm/stat.h
new file mode 100644
index 000000000000..e4edc510b530
--- /dev/null
+++ b/arch/powerpc/include/asm/stat.h
@@ -0,0 +1,81 @@
+#ifndef _ASM_POWERPC_STAT_H
+#define _ASM_POWERPC_STAT_H
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/types.h>
+
+#define STAT_HAVE_NSEC 1
+
+#ifndef __powerpc64__
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+#endif /* !__powerpc64__ */
+
+struct stat {
+	unsigned long	st_dev;
+	ino_t		st_ino;
+#ifdef __powerpc64__
+	nlink_t		st_nlink;
+	mode_t		st_mode;
+#else
+	mode_t		st_mode;
+	nlink_t		st_nlink;
+#endif
+	uid_t		st_uid;
+	gid_t		st_gid;
+	unsigned long	st_rdev;
+	off_t		st_size;
+	unsigned long	st_blksize;
+	unsigned long	st_blocks;
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+	unsigned long	__unused4;
+	unsigned long	__unused5;
+#ifdef __powerpc64__
+	unsigned long	__unused6;
+#endif
+};
+
+/* This matches struct stat64 in glibc2.1. Only used for 32 bit. */
+struct stat64 {
+	unsigned long long st_dev;		/* Device.  */
+	unsigned long long st_ino;		/* File serial number.  */
+	unsigned int	st_mode;	/* File mode.  */
+	unsigned int	st_nlink;	/* Link count.  */
+	unsigned int	st_uid;		/* User ID of the file's owner.  */
+	unsigned int	st_gid;		/* Group ID of the file's group. */
+	unsigned long long st_rdev;	/* Device number, if device.  */
+	unsigned short	__pad2;
+	long long	st_size;	/* Size of file, in bytes.  */
+	int		st_blksize;	/* Optimal block size for I/O.  */
+	long long	st_blocks;	/* Number 512-byte blocks allocated. */
+	int		st_atime;	/* Time of last access.  */
+	unsigned int	st_atime_nsec;
+	int		st_mtime;	/* Time of last modification.  */
+	unsigned int	st_mtime_nsec;
+	int		st_ctime;	/* Time of last status change.  */
+	unsigned int	st_ctime_nsec;
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+
+#endif /* _ASM_POWERPC_STAT_H */
diff --git a/arch/powerpc/include/asm/statfs.h b/arch/powerpc/include/asm/statfs.h
new file mode 100644
index 000000000000..67024026c10d
--- /dev/null
+++ b/arch/powerpc/include/asm/statfs.h
@@ -0,0 +1,60 @@
+#ifndef _ASM_POWERPC_STATFS_H
+#define _ASM_POWERPC_STATFS_H
+
+/* For ppc32 we just use the generic definitions, not so simple on ppc64 */
+
+#ifndef __powerpc64__
+#include <asm-generic/statfs.h>
+#else
+
+#ifndef __KERNEL_STRICT_NAMES
+#include <linux/types.h>
+typedef __kernel_fsid_t	fsid_t;
+#endif
+
+/*
+ * We're already 64-bit, so duplicate the definition
+ */
+struct statfs {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct statfs64 {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+};
+#endif /* ! __powerpc64__ */
+#endif
diff --git a/arch/powerpc/include/asm/string.h b/arch/powerpc/include/asm/string.h
new file mode 100644
index 000000000000..e40010abcaf1
--- /dev/null
+++ b/arch/powerpc/include/asm/string.h
@@ -0,0 +1,32 @@
+#ifndef _ASM_POWERPC_STRING_H
+#define _ASM_POWERPC_STRING_H
+
+#ifdef __KERNEL__
+
+#define __HAVE_ARCH_STRCPY
+#define __HAVE_ARCH_STRNCPY
+#define __HAVE_ARCH_STRLEN
+#define __HAVE_ARCH_STRCMP
+#define __HAVE_ARCH_STRNCMP
+#define __HAVE_ARCH_STRCAT
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+#define __HAVE_ARCH_MEMCMP
+#define __HAVE_ARCH_MEMCHR
+
+extern char * strcpy(char *,const char *);
+extern char * strncpy(char *,const char *, __kernel_size_t);
+extern __kernel_size_t strlen(const char *);
+extern int strcmp(const char *,const char *);
+extern int strncmp(const char *, const char *, __kernel_size_t);
+extern char * strcat(char *, const char *);
+extern void * memset(void *,int,__kernel_size_t);
+extern void * memcpy(void *,const void *,__kernel_size_t);
+extern void * memmove(void *,const void *,__kernel_size_t);
+extern int memcmp(const void *,const void *,__kernel_size_t);
+extern void * memchr(const void *,int,__kernel_size_t);
+
+#endif /* __KERNEL__ */
+
+#endif	/* _ASM_POWERPC_STRING_H */
diff --git a/arch/powerpc/include/asm/suspend.h b/arch/powerpc/include/asm/suspend.h
new file mode 100644
index 000000000000..cbf2c9404c37
--- /dev/null
+++ b/arch/powerpc/include/asm/suspend.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_POWERPC_SUSPEND_H
+#define __ASM_POWERPC_SUSPEND_H
+
+static inline int arch_prepare_suspend(void) { return 0; }
+
+void save_processor_state(void);
+void restore_processor_state(void);
+
+#endif /* __ASM_POWERPC_SUSPEND_H */
diff --git a/arch/powerpc/include/asm/synch.h b/arch/powerpc/include/asm/synch.h
new file mode 100644
index 000000000000..45963e80f557
--- /dev/null
+++ b/arch/powerpc/include/asm/synch.h
@@ -0,0 +1,44 @@
+#ifndef _ASM_POWERPC_SYNCH_H 
+#define _ASM_POWERPC_SYNCH_H 
+#ifdef __KERNEL__
+
+#include <linux/stringify.h>
+#include <asm/feature-fixups.h>
+
+#ifndef __ASSEMBLY__
+extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup;
+extern void do_lwsync_fixups(unsigned long value, void *fixup_start,
+			     void *fixup_end);
+
+static inline void eieio(void)
+{
+	__asm__ __volatile__ ("eieio" : : : "memory");
+}
+
+static inline void isync(void)
+{
+	__asm__ __volatile__ ("isync" : : : "memory");
+}
+#endif /* __ASSEMBLY__ */
+
+#if defined(__powerpc64__)
+#    define LWSYNC	lwsync
+#elif defined(CONFIG_E500)
+#    define LWSYNC					\
+	START_LWSYNC_SECTION(96);			\
+	sync;						\
+	MAKE_LWSYNC_SECTION_ENTRY(96, __lwsync_fixup);
+#else
+#    define LWSYNC	sync
+#endif
+
+#ifdef CONFIG_SMP
+#define ISYNC_ON_SMP	"\n\tisync\n"
+#define LWSYNC_ON_SMP	stringify_in_c(LWSYNC) "\n"
+#else
+#define ISYNC_ON_SMP
+#define LWSYNC_ON_SMP
+#endif
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_SYNCH_H */
diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h
new file mode 100644
index 000000000000..efa7f0b879f3
--- /dev/null
+++ b/arch/powerpc/include/asm/syscall.h
@@ -0,0 +1,84 @@
+/*
+ * Access to user system call parameters and results
+ *
+ * Copyright (C) 2008 Red Hat, Inc.  All rights reserved.
+ *
+ * This copyrighted material is made available to anyone wishing to use,
+ * modify, copy, or redistribute it subject to the terms and conditions
+ * of the GNU General Public License v.2.
+ *
+ * See asm-generic/syscall.h for descriptions of what we must do here.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H	1
+
+#include <linux/sched.h>
+
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	return TRAP(regs) == 0xc00 ? regs->gpr[0] : -1L;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	regs->gpr[3] = regs->orig_gpr3;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	return (regs->ccr & 0x1000) ? -regs->gpr[3] : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->gpr[3];
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error) {
+		regs->ccr |= 0x1000L;
+		regs->gpr[3] = -error;
+	} else {
+		regs->ccr &= ~0x1000L;
+		regs->gpr[3] = val;
+	}
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+#ifdef CONFIG_PPC64
+	if (test_tsk_thread_flag(task, TIF_32BIT)) {
+		/*
+		 * Zero-extend 32-bit argument values.  The high bits are
+		 * garbage ignored by the actual syscall dispatch.
+		 */
+		while (n-- > 0)
+			args[n] = (u32) regs->gpr[3 + i + n];
+		return;
+	}
+#endif
+	memcpy(args, &regs->gpr[3 + i], n * sizeof(args[0]));
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	BUG_ON(i + n > 6);
+	memcpy(&regs->gpr[3 + i], args, n * sizeof(args[0]));
+}
+
+#endif	/* _ASM_SYSCALL_H */
diff --git a/arch/powerpc/include/asm/syscalls.h b/arch/powerpc/include/asm/syscalls.h
new file mode 100644
index 000000000000..eb8eb400c664
--- /dev/null
+++ b/arch/powerpc/include/asm/syscalls.h
@@ -0,0 +1,52 @@
+#ifndef __ASM_POWERPC_SYSCALLS_H
+#define __ASM_POWERPC_SYSCALLS_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <linux/types.h>
+#include <asm/signal.h>
+
+struct new_utsname;
+struct pt_regs;
+struct rtas_args;
+struct sigaction;
+
+asmlinkage unsigned long sys_mmap(unsigned long addr, size_t len,
+		unsigned long prot, unsigned long flags,
+		unsigned long fd, off_t offset);
+asmlinkage unsigned long sys_mmap2(unsigned long addr, size_t len,
+		unsigned long prot, unsigned long flags,
+		unsigned long fd, unsigned long pgoff);
+asmlinkage int sys_execve(unsigned long a0, unsigned long a1,
+		unsigned long a2, unsigned long a3, unsigned long a4,
+		unsigned long a5, struct pt_regs *regs);
+asmlinkage int sys_clone(unsigned long clone_flags, unsigned long usp,
+		int __user *parent_tidp, void __user *child_threadptr,
+		int __user *child_tidp, int p6, struct pt_regs *regs);
+asmlinkage int sys_fork(unsigned long p1, unsigned long p2,
+		unsigned long p3, unsigned long p4, unsigned long p5,
+		unsigned long p6, struct pt_regs *regs);
+asmlinkage int sys_vfork(unsigned long p1, unsigned long p2,
+		unsigned long p3, unsigned long p4, unsigned long p5,
+		unsigned long p6, struct pt_regs *regs);
+asmlinkage long sys_pipe(int __user *fildes);
+asmlinkage long sys_pipe2(int __user *fildes, int flags);
+asmlinkage long sys_rt_sigaction(int sig,
+		const struct sigaction __user *act,
+		struct sigaction __user *oact, size_t sigsetsize);
+asmlinkage int sys_ipc(uint call, int first, unsigned long second,
+		long third, void __user *ptr, long fifth);
+asmlinkage long ppc64_personality(unsigned long personality);
+asmlinkage int ppc_rtas(struct rtas_args __user *uargs);
+asmlinkage time_t sys64_time(time_t __user * tloc);
+asmlinkage long ppc_newuname(struct new_utsname __user * name);
+
+asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset,
+		size_t sigsetsize);
+asmlinkage long sys_sigaltstack(const stack_t __user *uss,
+		stack_t __user *uoss, unsigned long r5, unsigned long r6,
+		unsigned long r7, unsigned long r8, struct pt_regs *regs);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_SYSCALLS_H */
diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h
new file mode 100644
index 000000000000..e084272ed1c2
--- /dev/null
+++ b/arch/powerpc/include/asm/systbl.h
@@ -0,0 +1,324 @@
+/*
+ * List of powerpc syscalls. For the meaning of the _SPU suffix see
+ * arch/powerpc/platforms/cell/spu_callbacks.c
+ */
+
+SYSCALL(restart_syscall)
+SYSCALL(exit)
+PPC_SYS(fork)
+SYSCALL_SPU(read)
+SYSCALL_SPU(write)
+COMPAT_SYS_SPU(open)
+SYSCALL_SPU(close)
+COMPAT_SYS_SPU(waitpid)
+COMPAT_SYS_SPU(creat)
+SYSCALL_SPU(link)
+SYSCALL_SPU(unlink)
+COMPAT_SYS(execve)
+SYSCALL_SPU(chdir)
+COMPAT_SYS_SPU(time)
+SYSCALL_SPU(mknod)
+SYSCALL_SPU(chmod)
+SYSCALL_SPU(lchown)
+SYSCALL(ni_syscall)
+OLDSYS(stat)
+SYSX_SPU(sys_lseek,ppc32_lseek,sys_lseek)
+SYSCALL_SPU(getpid)
+COMPAT_SYS(mount)
+SYSX(sys_ni_syscall,sys_oldumount,sys_oldumount)
+SYSCALL_SPU(setuid)
+SYSCALL_SPU(getuid)
+COMPAT_SYS_SPU(stime)
+COMPAT_SYS(ptrace)
+SYSCALL_SPU(alarm)
+OLDSYS(fstat)
+COMPAT_SYS(pause)
+COMPAT_SYS(utime)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(access)
+COMPAT_SYS_SPU(nice)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(sync)
+COMPAT_SYS_SPU(kill)
+SYSCALL_SPU(rename)
+COMPAT_SYS_SPU(mkdir)
+SYSCALL_SPU(rmdir)
+SYSCALL_SPU(dup)
+SYSCALL_SPU(pipe)
+COMPAT_SYS_SPU(times)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(brk)
+SYSCALL_SPU(setgid)
+SYSCALL_SPU(getgid)
+SYSCALL(signal)
+SYSCALL_SPU(geteuid)
+SYSCALL_SPU(getegid)
+SYSCALL(acct)
+SYSCALL(umount)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(ioctl)
+COMPAT_SYS_SPU(fcntl)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(setpgid)
+SYSCALL(ni_syscall)
+SYSX(sys_ni_syscall,sys_olduname, sys_olduname)
+COMPAT_SYS_SPU(umask)
+SYSCALL_SPU(chroot)
+SYSCALL(ustat)
+SYSCALL_SPU(dup2)
+SYSCALL_SPU(getppid)
+SYSCALL_SPU(getpgrp)
+SYSCALL_SPU(setsid)
+SYS32ONLY(sigaction)
+SYSCALL_SPU(sgetmask)
+COMPAT_SYS_SPU(ssetmask)
+SYSCALL_SPU(setreuid)
+SYSCALL_SPU(setregid)
+SYS32ONLY(sigsuspend)
+COMPAT_SYS(sigpending)
+COMPAT_SYS_SPU(sethostname)
+COMPAT_SYS_SPU(setrlimit)
+COMPAT_SYS(old_getrlimit)
+COMPAT_SYS_SPU(getrusage)
+COMPAT_SYS_SPU(gettimeofday)
+COMPAT_SYS_SPU(settimeofday)
+COMPAT_SYS_SPU(getgroups)
+COMPAT_SYS_SPU(setgroups)
+SYSX(sys_ni_syscall,sys_ni_syscall,ppc_select)
+SYSCALL_SPU(symlink)
+OLDSYS(lstat)
+COMPAT_SYS_SPU(readlink)
+SYSCALL(uselib)
+SYSCALL(swapon)
+SYSCALL(reboot)
+SYSX(sys_ni_syscall,old32_readdir,old_readdir)
+SYSCALL_SPU(mmap)
+SYSCALL_SPU(munmap)
+SYSCALL_SPU(truncate)
+SYSCALL_SPU(ftruncate)
+SYSCALL_SPU(fchmod)
+SYSCALL_SPU(fchown)
+COMPAT_SYS_SPU(getpriority)
+COMPAT_SYS_SPU(setpriority)
+SYSCALL(ni_syscall)
+COMPAT_SYS(statfs)
+COMPAT_SYS(fstatfs)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(socketcall)
+COMPAT_SYS_SPU(syslog)
+COMPAT_SYS_SPU(setitimer)
+COMPAT_SYS_SPU(getitimer)
+COMPAT_SYS_SPU(newstat)
+COMPAT_SYS_SPU(newlstat)
+COMPAT_SYS_SPU(newfstat)
+SYSX(sys_ni_syscall,sys_uname,sys_uname)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(vhangup)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(wait4)
+SYSCALL(swapoff)
+COMPAT_SYS_SPU(sysinfo)
+COMPAT_SYS(ipc)
+SYSCALL_SPU(fsync)
+SYS32ONLY(sigreturn)
+PPC_SYS(clone)
+COMPAT_SYS_SPU(setdomainname)
+PPC_SYS_SPU(newuname)
+SYSCALL(ni_syscall)
+COMPAT_SYS_SPU(adjtimex)
+SYSCALL_SPU(mprotect)
+SYSX(sys_ni_syscall,compat_sys_sigprocmask,sys_sigprocmask)
+SYSCALL(ni_syscall)
+SYSCALL(init_module)
+SYSCALL(delete_module)
+SYSCALL(ni_syscall)
+SYSCALL(quotactl)
+COMPAT_SYS_SPU(getpgid)
+SYSCALL_SPU(fchdir)
+SYSCALL_SPU(bdflush)
+COMPAT_SYS(sysfs)
+SYSX_SPU(ppc64_personality,ppc64_personality,sys_personality)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(setfsuid)
+SYSCALL_SPU(setfsgid)
+SYSCALL_SPU(llseek)
+COMPAT_SYS_SPU(getdents)
+SYSX_SPU(sys_select,ppc32_select,ppc_select)
+SYSCALL_SPU(flock)
+SYSCALL_SPU(msync)
+COMPAT_SYS_SPU(readv)
+COMPAT_SYS_SPU(writev)
+COMPAT_SYS_SPU(getsid)
+SYSCALL_SPU(fdatasync)
+COMPAT_SYS(sysctl)
+SYSCALL_SPU(mlock)
+SYSCALL_SPU(munlock)
+SYSCALL_SPU(mlockall)
+SYSCALL_SPU(munlockall)
+COMPAT_SYS_SPU(sched_setparam)
+COMPAT_SYS_SPU(sched_getparam)
+COMPAT_SYS_SPU(sched_setscheduler)
+COMPAT_SYS_SPU(sched_getscheduler)
+SYSCALL_SPU(sched_yield)
+COMPAT_SYS_SPU(sched_get_priority_max)
+COMPAT_SYS_SPU(sched_get_priority_min)
+COMPAT_SYS_SPU(sched_rr_get_interval)
+COMPAT_SYS_SPU(nanosleep)
+SYSCALL_SPU(mremap)
+SYSCALL_SPU(setresuid)
+SYSCALL_SPU(getresuid)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(poll)
+COMPAT_SYS(nfsservctl)
+SYSCALL_SPU(setresgid)
+SYSCALL_SPU(getresgid)
+COMPAT_SYS_SPU(prctl)
+COMPAT_SYS(rt_sigreturn)
+COMPAT_SYS(rt_sigaction)
+COMPAT_SYS(rt_sigprocmask)
+COMPAT_SYS(rt_sigpending)
+COMPAT_SYS(rt_sigtimedwait)
+COMPAT_SYS(rt_sigqueueinfo)
+COMPAT_SYS(rt_sigsuspend)
+COMPAT_SYS_SPU(pread64)
+COMPAT_SYS_SPU(pwrite64)
+SYSCALL_SPU(chown)
+SYSCALL_SPU(getcwd)
+SYSCALL_SPU(capget)
+SYSCALL_SPU(capset)
+COMPAT_SYS(sigaltstack)
+SYSX_SPU(sys_sendfile64,compat_sys_sendfile,sys_sendfile)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+PPC_SYS(vfork)
+COMPAT_SYS_SPU(getrlimit)
+COMPAT_SYS_SPU(readahead)
+SYS32ONLY(mmap2)
+SYS32ONLY(truncate64)
+SYS32ONLY(ftruncate64)
+SYSX(sys_ni_syscall,sys_stat64,sys_stat64)
+SYSX(sys_ni_syscall,sys_lstat64,sys_lstat64)
+SYSX(sys_ni_syscall,sys_fstat64,sys_fstat64)
+SYSCALL(pciconfig_read)
+SYSCALL(pciconfig_write)
+SYSCALL(pciconfig_iobase)
+SYSCALL(ni_syscall)
+SYSCALL_SPU(getdents64)
+SYSCALL_SPU(pivot_root)
+SYSX(sys_ni_syscall,compat_sys_fcntl64,sys_fcntl64)
+SYSCALL_SPU(madvise)
+SYSCALL_SPU(mincore)
+SYSCALL_SPU(gettid)
+SYSCALL_SPU(tkill)
+SYSCALL_SPU(setxattr)
+SYSCALL_SPU(lsetxattr)
+SYSCALL_SPU(fsetxattr)
+SYSCALL_SPU(getxattr)
+SYSCALL_SPU(lgetxattr)
+SYSCALL_SPU(fgetxattr)
+SYSCALL_SPU(listxattr)
+SYSCALL_SPU(llistxattr)
+SYSCALL_SPU(flistxattr)
+SYSCALL_SPU(removexattr)
+SYSCALL_SPU(lremovexattr)
+SYSCALL_SPU(fremovexattr)
+COMPAT_SYS_SPU(futex)
+COMPAT_SYS_SPU(sched_setaffinity)
+COMPAT_SYS_SPU(sched_getaffinity)
+SYSCALL(ni_syscall)
+SYSCALL(ni_syscall)
+SYS32ONLY(sendfile64)
+COMPAT_SYS_SPU(io_setup)
+SYSCALL_SPU(io_destroy)
+COMPAT_SYS_SPU(io_getevents)
+COMPAT_SYS_SPU(io_submit)
+SYSCALL_SPU(io_cancel)
+SYSCALL(set_tid_address)
+SYSX_SPU(sys_fadvise64,ppc32_fadvise64,sys_fadvise64)
+SYSCALL(exit_group)
+SYSX(sys_lookup_dcookie,ppc32_lookup_dcookie,sys_lookup_dcookie)
+SYSCALL_SPU(epoll_create)
+SYSCALL_SPU(epoll_ctl)
+SYSCALL_SPU(epoll_wait)
+SYSCALL_SPU(remap_file_pages)
+SYSX_SPU(sys_timer_create,compat_sys_timer_create,sys_timer_create)
+COMPAT_SYS_SPU(timer_settime)
+COMPAT_SYS_SPU(timer_gettime)
+SYSCALL_SPU(timer_getoverrun)
+SYSCALL_SPU(timer_delete)
+COMPAT_SYS_SPU(clock_settime)
+COMPAT_SYS_SPU(clock_gettime)
+COMPAT_SYS_SPU(clock_getres)
+COMPAT_SYS_SPU(clock_nanosleep)
+SYSX(ppc64_swapcontext,ppc32_swapcontext,ppc_swapcontext)
+COMPAT_SYS_SPU(tgkill)
+COMPAT_SYS_SPU(utimes)
+COMPAT_SYS_SPU(statfs64)
+COMPAT_SYS_SPU(fstatfs64)
+SYSX(sys_ni_syscall, ppc_fadvise64_64, ppc_fadvise64_64)
+PPC_SYS_SPU(rtas)
+OLDSYS(debug_setcontext)
+SYSCALL(ni_syscall)
+COMPAT_SYS(migrate_pages)
+COMPAT_SYS(mbind)
+COMPAT_SYS(get_mempolicy)
+COMPAT_SYS(set_mempolicy)
+COMPAT_SYS(mq_open)
+SYSCALL(mq_unlink)
+COMPAT_SYS(mq_timedsend)
+COMPAT_SYS(mq_timedreceive)
+COMPAT_SYS(mq_notify)
+COMPAT_SYS(mq_getsetattr)
+COMPAT_SYS(kexec_load)
+COMPAT_SYS(add_key)
+COMPAT_SYS(request_key)
+COMPAT_SYS(keyctl)
+COMPAT_SYS(waitid)
+COMPAT_SYS(ioprio_set)
+COMPAT_SYS(ioprio_get)
+SYSCALL(inotify_init)
+SYSCALL(inotify_add_watch)
+SYSCALL(inotify_rm_watch)
+SYSCALL(spu_run)
+SYSCALL(spu_create)
+COMPAT_SYS(pselect6)
+COMPAT_SYS(ppoll)
+SYSCALL_SPU(unshare)
+SYSCALL_SPU(splice)
+SYSCALL_SPU(tee)
+COMPAT_SYS_SPU(vmsplice)
+COMPAT_SYS_SPU(openat)
+SYSCALL_SPU(mkdirat)
+SYSCALL_SPU(mknodat)
+SYSCALL_SPU(fchownat)
+COMPAT_SYS_SPU(futimesat)
+SYSX_SPU(sys_newfstatat, sys_fstatat64, sys_fstatat64)
+SYSCALL_SPU(unlinkat)
+SYSCALL_SPU(renameat)
+SYSCALL_SPU(linkat)
+SYSCALL_SPU(symlinkat)
+SYSCALL_SPU(readlinkat)
+SYSCALL_SPU(fchmodat)
+SYSCALL_SPU(faccessat)
+COMPAT_SYS_SPU(get_robust_list)
+COMPAT_SYS_SPU(set_robust_list)
+COMPAT_SYS_SPU(move_pages)
+SYSCALL_SPU(getcpu)
+COMPAT_SYS(epoll_pwait)
+COMPAT_SYS_SPU(utimensat)
+COMPAT_SYS_SPU(signalfd)
+SYSCALL_SPU(timerfd_create)
+SYSCALL_SPU(eventfd)
+COMPAT_SYS_SPU(sync_file_range2)
+COMPAT_SYS(fallocate)
+SYSCALL(subpage_prot)
+COMPAT_SYS_SPU(timerfd_settime)
+COMPAT_SYS_SPU(timerfd_gettime)
+COMPAT_SYS_SPU(signalfd4)
+SYSCALL_SPU(eventfd2)
+SYSCALL_SPU(epoll_create1)
+SYSCALL_SPU(dup3)
+SYSCALL_SPU(pipe2)
+SYSCALL(inotify_init1)
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
new file mode 100644
index 000000000000..d6648c143322
--- /dev/null
+++ b/arch/powerpc/include/asm/system.h
@@ -0,0 +1,548 @@
+/*
+ * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
+ */
+#ifndef _ASM_POWERPC_SYSTEM_H
+#define _ASM_POWERPC_SYSTEM_H
+
+#include <linux/kernel.h>
+#include <linux/irqflags.h>
+
+#include <asm/hw_irq.h>
+
+/*
+ * Memory barrier.
+ * The sync instruction guarantees that all memory accesses initiated
+ * by this processor have been performed (with respect to all other
+ * mechanisms that access memory).  The eieio instruction is a barrier
+ * providing an ordering (separately) for (a) cacheable stores and (b)
+ * loads and stores to non-cacheable memory (e.g. I/O devices).
+ *
+ * mb() prevents loads and stores being reordered across this point.
+ * rmb() prevents loads being reordered across this point.
+ * wmb() prevents stores being reordered across this point.
+ * read_barrier_depends() prevents data-dependent loads being reordered
+ *	across this point (nop on PPC).
+ *
+ * We have to use the sync instructions for mb(), since lwsync doesn't
+ * order loads with respect to previous stores.  Lwsync is fine for
+ * rmb(), though. Note that rmb() actually uses a sync on 32-bit
+ * architectures.
+ *
+ * For wmb(), we use sync since wmb is used in drivers to order
+ * stores to system memory with respect to writes to the device.
+ * However, smp_wmb() can be a lighter-weight lwsync or eieio barrier
+ * on SMP since it is only used to order updates to system memory.
+ */
+#define mb()   __asm__ __volatile__ ("sync" : : : "memory")
+#define rmb()  __asm__ __volatile__ ("sync" : : : "memory")
+#define wmb()  __asm__ __volatile__ ("sync" : : : "memory")
+#define read_barrier_depends()  do { } while(0)
+
+#define set_mb(var, value)	do { var = value; mb(); } while (0)
+
+#ifdef __KERNEL__
+#define AT_VECTOR_SIZE_ARCH 6 /* entries in ARCH_DLINFO */
+#ifdef CONFIG_SMP
+
+#ifdef __SUBARCH_HAS_LWSYNC
+#    define SMPWMB      lwsync
+#else
+#    define SMPWMB      eieio
+#endif
+
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	__asm__ __volatile__ (__stringify(SMPWMB) : : :"memory")
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif /* CONFIG_SMP */
+
+/*
+ * This is a barrier which prevents following instructions from being
+ * started until the value of the argument x is known.  For example, if
+ * x is a variable loaded from memory, this prevents following
+ * instructions from being executed until the load has been performed.
+ */
+#define data_barrier(x)	\
+	asm volatile("twi 0,%0,0; isync" : : "r" (x) : "memory");
+
+struct task_struct;
+struct pt_regs;
+
+#if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
+
+extern int (*__debugger)(struct pt_regs *regs);
+extern int (*__debugger_ipi)(struct pt_regs *regs);
+extern int (*__debugger_bpt)(struct pt_regs *regs);
+extern int (*__debugger_sstep)(struct pt_regs *regs);
+extern int (*__debugger_iabr_match)(struct pt_regs *regs);
+extern int (*__debugger_dabr_match)(struct pt_regs *regs);
+extern int (*__debugger_fault_handler)(struct pt_regs *regs);
+
+#define DEBUGGER_BOILERPLATE(__NAME) \
+static inline int __NAME(struct pt_regs *regs) \
+{ \
+	if (unlikely(__ ## __NAME)) \
+		return __ ## __NAME(regs); \
+	return 0; \
+}
+
+DEBUGGER_BOILERPLATE(debugger)
+DEBUGGER_BOILERPLATE(debugger_ipi)
+DEBUGGER_BOILERPLATE(debugger_bpt)
+DEBUGGER_BOILERPLATE(debugger_sstep)
+DEBUGGER_BOILERPLATE(debugger_iabr_match)
+DEBUGGER_BOILERPLATE(debugger_dabr_match)
+DEBUGGER_BOILERPLATE(debugger_fault_handler)
+
+#else
+static inline int debugger(struct pt_regs *regs) { return 0; }
+static inline int debugger_ipi(struct pt_regs *regs) { return 0; }
+static inline int debugger_bpt(struct pt_regs *regs) { return 0; }
+static inline int debugger_sstep(struct pt_regs *regs) { return 0; }
+static inline int debugger_iabr_match(struct pt_regs *regs) { return 0; }
+static inline int debugger_dabr_match(struct pt_regs *regs) { return 0; }
+static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; }
+#endif
+
+extern int set_dabr(unsigned long dabr);
+extern void do_dabr(struct pt_regs *regs, unsigned long address,
+		    unsigned long error_code);
+extern void print_backtrace(unsigned long *);
+extern void show_regs(struct pt_regs * regs);
+extern void flush_instruction_cache(void);
+extern void hard_reset_now(void);
+extern void poweroff_now(void);
+
+#ifdef CONFIG_6xx
+extern long _get_L2CR(void);
+extern long _get_L3CR(void);
+extern void _set_L2CR(unsigned long);
+extern void _set_L3CR(unsigned long);
+#else
+#define _get_L2CR()	0L
+#define _get_L3CR()	0L
+#define _set_L2CR(val)	do { } while(0)
+#define _set_L3CR(val)	do { } while(0)
+#endif
+
+extern void via_cuda_init(void);
+extern void read_rtc_time(void);
+extern void pmac_find_display(void);
+extern void giveup_fpu(struct task_struct *);
+extern void disable_kernel_fp(void);
+extern void enable_kernel_fp(void);
+extern void flush_fp_to_thread(struct task_struct *);
+extern void enable_kernel_altivec(void);
+extern void giveup_altivec(struct task_struct *);
+extern void load_up_altivec(struct task_struct *);
+extern int emulate_altivec(struct pt_regs *);
+extern void __giveup_vsx(struct task_struct *);
+extern void giveup_vsx(struct task_struct *);
+extern void enable_kernel_spe(void);
+extern void giveup_spe(struct task_struct *);
+extern void load_up_spe(struct task_struct *);
+extern int fix_alignment(struct pt_regs *);
+extern void cvt_fd(float *from, double *to, struct thread_struct *thread);
+extern void cvt_df(double *from, float *to, struct thread_struct *thread);
+
+#ifndef CONFIG_SMP
+extern void discard_lazy_cpu_state(void);
+#else
+static inline void discard_lazy_cpu_state(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ALTIVEC
+extern void flush_altivec_to_thread(struct task_struct *);
+#else
+static inline void flush_altivec_to_thread(struct task_struct *t)
+{
+}
+#endif
+
+#ifdef CONFIG_VSX
+extern void flush_vsx_to_thread(struct task_struct *);
+#else
+static inline void flush_vsx_to_thread(struct task_struct *t)
+{
+}
+#endif
+
+#ifdef CONFIG_SPE
+extern void flush_spe_to_thread(struct task_struct *);
+#else
+static inline void flush_spe_to_thread(struct task_struct *t)
+{
+}
+#endif
+
+extern int call_rtas(const char *, int, int, unsigned long *, ...);
+extern void cacheable_memzero(void *p, unsigned int nb);
+extern void *cacheable_memcpy(void *, const void *, unsigned int);
+extern int do_page_fault(struct pt_regs *, unsigned long, unsigned long);
+extern void bad_page_fault(struct pt_regs *, unsigned long, int);
+extern int die(const char *, struct pt_regs *, long);
+extern void _exception(int, struct pt_regs *, int, unsigned long);
+extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val);
+
+#ifdef CONFIG_BOOKE_WDT
+extern u32 booke_wdt_enabled;
+extern u32 booke_wdt_period;
+#endif /* CONFIG_BOOKE_WDT */
+
+struct device_node;
+extern void note_scsi_host(struct device_node *, void *);
+
+extern struct task_struct *__switch_to(struct task_struct *,
+	struct task_struct *);
+#define switch_to(prev, next, last)	((last) = __switch_to((prev), (next)))
+
+struct thread_struct;
+extern struct task_struct *_switch(struct thread_struct *prev,
+				   struct thread_struct *next);
+
+extern unsigned int rtas_data;
+extern int mem_init_done;	/* set on boot once kmalloc can be called */
+extern int init_bootmem_done;	/* set on !NUMA once bootmem is available */
+extern unsigned long memory_limit;
+extern unsigned long klimit;
+
+extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
+extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
+
+extern int powersave_nap;	/* set if nap mode can be used in idle loop */
+
+/*
+ * Atomic exchange
+ *
+ * Changes the memory location '*ptr' to be val and returns
+ * the previous value stored there.
+ */
+static __always_inline unsigned long
+__xchg_u32(volatile void *p, unsigned long val)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%2 \n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%3,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
+	: "r" (p), "r" (val)
+	: "cc", "memory");
+
+	return prev;
+}
+
+/*
+ * Atomic exchange
+ *
+ * Changes the memory location '*ptr' to be val and returns
+ * the previous value stored there.
+ */
+static __always_inline unsigned long
+__xchg_u32_local(volatile void *p, unsigned long val)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__(
+"1:	lwarx	%0,0,%2 \n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%3,0,%2 \n\
+	bne-	1b"
+	: "=&r" (prev), "+m" (*(volatile unsigned int *)p)
+	: "r" (p), "r" (val)
+	: "cc", "memory");
+
+	return prev;
+}
+
+#ifdef CONFIG_PPC64
+static __always_inline unsigned long
+__xchg_u64(volatile void *p, unsigned long val)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__(
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%2 \n"
+	PPC405_ERR77(0,%2)
+"	stdcx.	%3,0,%2 \n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
+	: "r" (p), "r" (val)
+	: "cc", "memory");
+
+	return prev;
+}
+
+static __always_inline unsigned long
+__xchg_u64_local(volatile void *p, unsigned long val)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__(
+"1:	ldarx	%0,0,%2 \n"
+	PPC405_ERR77(0,%2)
+"	stdcx.	%3,0,%2 \n\
+	bne-	1b"
+	: "=&r" (prev), "+m" (*(volatile unsigned long *)p)
+	: "r" (p), "r" (val)
+	: "cc", "memory");
+
+	return prev;
+}
+#endif
+
+/*
+ * This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid xchg().
+ */
+extern void __xchg_called_with_bad_pointer(void);
+
+static __always_inline unsigned long
+__xchg(volatile void *ptr, unsigned long x, unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __xchg_u32(ptr, x);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __xchg_u64(ptr, x);
+#endif
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+static __always_inline unsigned long
+__xchg_local(volatile void *ptr, unsigned long x, unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __xchg_u32_local(ptr, x);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __xchg_u64_local(ptr, x);
+#endif
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+#define xchg(ptr,x)							     \
+  ({									     \
+     __typeof__(*(ptr)) _x_ = (x);					     \
+     (__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, sizeof(*(ptr))); \
+  })
+
+#define xchg_local(ptr,x)						     \
+  ({									     \
+     __typeof__(*(ptr)) _x_ = (x);					     \
+     (__typeof__(*(ptr))) __xchg_local((ptr),				     \
+     		(unsigned long)_x_, sizeof(*(ptr))); 			     \
+  })
+
+/*
+ * Compare and exchange - if *p == old, set it to new,
+ * and return the old value of *p.
+ */
+#define __HAVE_ARCH_CMPXCHG	1
+
+static __always_inline unsigned long
+__cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new)
+{
+	unsigned int prev;
+
+	__asm__ __volatile__ (
+	LWSYNC_ON_SMP
+"1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
+	cmpw	0,%0,%3\n\
+	bne-	2f\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%4,0,%2\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	"\n\
+2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+
+static __always_inline unsigned long
+__cmpxchg_u32_local(volatile unsigned int *p, unsigned long old,
+			unsigned long new)
+{
+	unsigned int prev;
+
+	__asm__ __volatile__ (
+"1:	lwarx	%0,0,%2		# __cmpxchg_u32\n\
+	cmpw	0,%0,%3\n\
+	bne-	2f\n"
+	PPC405_ERR77(0,%2)
+"	stwcx.	%4,0,%2\n\
+	bne-	1b"
+	"\n\
+2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+
+#ifdef CONFIG_PPC64
+static __always_inline unsigned long
+__cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__ (
+	LWSYNC_ON_SMP
+"1:	ldarx	%0,0,%2		# __cmpxchg_u64\n\
+	cmpd	0,%0,%3\n\
+	bne-	2f\n\
+	stdcx.	%4,0,%2\n\
+	bne-	1b"
+	ISYNC_ON_SMP
+	"\n\
+2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+
+static __always_inline unsigned long
+__cmpxchg_u64_local(volatile unsigned long *p, unsigned long old,
+			unsigned long new)
+{
+	unsigned long prev;
+
+	__asm__ __volatile__ (
+"1:	ldarx	%0,0,%2		# __cmpxchg_u64\n\
+	cmpd	0,%0,%3\n\
+	bne-	2f\n\
+	stdcx.	%4,0,%2\n\
+	bne-	1b"
+	"\n\
+2:"
+	: "=&r" (prev), "+m" (*p)
+	: "r" (p), "r" (old), "r" (new)
+	: "cc", "memory");
+
+	return prev;
+}
+#endif
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static __always_inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new,
+	  unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32(ptr, old, new);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __cmpxchg_u64(ptr, old, new);
+#endif
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+static __always_inline unsigned long
+__cmpxchg_local(volatile void *ptr, unsigned long old, unsigned long new,
+	  unsigned int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32_local(ptr, old, new);
+#ifdef CONFIG_PPC64
+	case 8:
+		return __cmpxchg_u64_local(ptr, old, new);
+#endif
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr, o, n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+
+#define cmpxchg_local(ptr, o, n)					 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_,	 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+#ifdef CONFIG_PPC64
+/*
+ * We handle most unaligned accesses in hardware. On the other hand 
+ * unaligned DMA can be very expensive on some ppc64 IO chips (it does
+ * powers of 2 writes until it reaches sufficient alignment).
+ *
+ * Based on this we disable the IP header alignment in network drivers.
+ * We also modify NET_SKB_PAD to be a cacheline in size, thus maintaining
+ * cacheline alignment of buffers.
+ */
+#define NET_IP_ALIGN	0
+#define NET_SKB_PAD	L1_CACHE_BYTES
+
+#define cmpxchg64(ptr, o, n)						\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg((ptr), (o), (n));					\
+  })
+#define cmpxchg64_local(ptr, o, n)					\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+  })
+#else
+#include <asm-generic/cmpxchg-local.h>
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+#endif
+
+#define arch_align_stack(x) (x)
+
+/* Used in very early kernel initialization. */
+extern unsigned long reloc_offset(void);
+extern unsigned long add_reloc_offset(unsigned long);
+extern void reloc_got2(unsigned long);
+
+#define PTRRELOC(x)	((typeof(x)) add_reloc_offset((unsigned long)(x)))
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+extern void account_system_vtime(struct task_struct *);
+#endif
+
+extern struct dentry *powerpc_debugfs_root;
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_SYSTEM_H */
diff --git a/arch/powerpc/include/asm/tce.h b/arch/powerpc/include/asm/tce.h
new file mode 100644
index 000000000000..f663634cccc9
--- /dev/null
+++ b/arch/powerpc/include/asm/tce.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
+ * Rewrite, cleanup:
+ * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_TCE_H
+#define _ASM_POWERPC_TCE_H
+#ifdef __KERNEL__
+
+#include <asm/iommu.h>
+
+/*
+ * Tces come in two formats, one for the virtual bus and a different
+ * format for PCI
+ */
+#define TCE_VB  0
+#define TCE_PCI 1
+
+/* TCE page size is 4096 bytes (1 << 12) */
+
+#define TCE_SHIFT	12
+#define TCE_PAGE_SIZE	(1 << TCE_SHIFT)
+
+#define TCE_ENTRY_SIZE		8		/* each TCE is 64 bits */
+
+#define TCE_RPN_MASK		0xfffffffffful  /* 40-bit RPN (4K pages) */
+#define TCE_RPN_SHIFT		12
+#define TCE_VALID		0x800		/* TCE valid */
+#define TCE_ALLIO		0x400		/* TCE valid for all lpars */
+#define TCE_PCI_WRITE		0x2		/* write from PCI allowed */
+#define TCE_PCI_READ		0x1		/* read from PCI allowed */
+#define TCE_VB_WRITE		0x1		/* write from VB allowed */
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_TCE_H */
diff --git a/arch/powerpc/include/asm/termbits.h b/arch/powerpc/include/asm/termbits.h
new file mode 100644
index 000000000000..6698188ca550
--- /dev/null
+++ b/arch/powerpc/include/asm/termbits.h
@@ -0,0 +1,209 @@
+#ifndef _ASM_POWERPC_TERMBITS_H
+#define _ASM_POWERPC_TERMBITS_H
+
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+/*
+ * termios type and macro definitions.  Be careful about adding stuff
+ * to this file since it's used in GNU libc and there are strict rules
+ * concerning namespace pollution.
+ */
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t c_line;			/* line discipline (== c_cc[19]) */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* For PowerPC the termios and ktermios are the same */
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t c_line;			/* line discipline (== c_cc[19]) */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 	         0
+#define VQUIT 	         1
+#define VERASE 	         2
+#define VKILL	         3
+#define VEOF	         4
+#define VMIN	         5
+#define VEOL	         6
+#define VTIME	         7
+#define VEOL2	         8
+#define VSWTC	         9
+#define VWERASE 	10
+#define VREPRINT	11
+#define VSUSP 		12
+#define VSTART		13
+#define VSTOP		14
+#define VLNEXT		15
+#define VDISCARD	16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IXON	0001000
+#define IXOFF	0002000
+#define IXANY	0004000
+#define IUCLC	0010000
+#define IMAXBEL	0020000
+#define	IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define ONLCR	0000002
+#define OLCUC	0000004
+
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+
+#define OFILL	00000100
+#define OFDEL	00000200
+#define NLDLY	00001400
+#define   NL0	00000000
+#define   NL1	00000400
+#define   NL2	00001000
+#define   NL3	00001400
+#define TABDLY	00006000
+#define   TAB0	00000000
+#define   TAB1	00002000
+#define   TAB2	00004000
+#define   TAB3	00006000
+#define   XTABS	00006000	/* required by POSIX to == TAB3 */
+#define CRDLY	00030000
+#define   CR0	00000000
+#define   CR1	00010000
+#define   CR2	00020000
+#define   CR3	00030000
+#define FFDLY	00040000
+#define   FF0	00000000
+#define   FF1	00040000
+#define BSDLY	00100000
+#define   BS0	00000000
+#define   BS1	00100000
+#define VTDLY	00200000
+#define   VT0	00000000
+#define   VT1	00200000
+
+/* c_cflag bit meaning */
+#define CBAUD	0000377
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define  EXTA   B19200
+#define  EXTB   B38400
+#define  CBAUDEX 0000000
+#define  B57600   00020
+#define  B115200  00021
+#define  B230400  00022
+#define  B460800  00023
+#define  B500000  00024
+#define  B576000  00025
+#define  B921600  00026
+#define B1000000  00027
+#define B1152000  00030
+#define B1500000  00031
+#define B2000000  00032
+#define B2500000  00033
+#define B3000000  00034
+#define B3500000  00035
+#define B4000000  00036
+#define   BOTHER  00037
+
+#define CIBAUD	077600000
+#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
+
+#define CSIZE	00001400
+#define   CS5	00000000
+#define   CS6	00000400
+#define   CS7	00001000
+#define   CS8	00001400
+
+#define CSTOPB	00002000
+#define CREAD	00004000
+#define PARENB	00010000
+#define PARODD	00020000
+#define HUPCL	00040000
+
+#define CLOCAL	00100000
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0x00000080
+#define ICANON	0x00000100
+#define XCASE	0x00004000
+#define ECHO	0x00000008
+#define ECHOE	0x00000002
+#define ECHOK	0x00000004
+#define ECHONL	0x00000010
+#define NOFLSH	0x80000000
+#define TOSTOP	0x00400000
+#define ECHOCTL	0x00000040
+#define ECHOPRT	0x00000020
+#define ECHOKE	0x00000001
+#define FLUSHO	0x00800000
+#define PENDIN	0x20000000
+#define IEXTEN	0x00000400
+
+/* Values for the ACTION argument to `tcflow'.  */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* Values for the QUEUE_SELECTOR argument to `tcflush'.  */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'.  */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif	/* _ASM_POWERPC_TERMBITS_H */
diff --git a/arch/powerpc/include/asm/termios.h b/arch/powerpc/include/asm/termios.h
new file mode 100644
index 000000000000..2c14fea07c8a
--- /dev/null
+++ b/arch/powerpc/include/asm/termios.h
@@ -0,0 +1,85 @@
+#ifndef _ASM_POWERPC_TERMIOS_H
+#define _ASM_POWERPC_TERMIOS_H
+
+/*
+ * Liberally adapted from alpha/termios.h.  In particular, the c_cc[]
+ * fields have been reordered so that termio & termios share the
+ * common subset in the same order (for brain dead programs that don't
+ * know or care about the differences).
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/ioctls.h>
+#include <asm/termbits.h>
+
+struct sgttyb {
+	char	sg_ispeed;
+	char	sg_ospeed;
+	char	sg_erase;
+	char	sg_kill;
+	short	sg_flags;
+};
+
+struct tchars {
+	char	t_intrc;
+	char	t_quitc;
+	char	t_startc;
+	char	t_stopc;
+	char	t_eofc;
+	char	t_brkc;
+};
+
+struct ltchars {
+	char	t_suspc;
+	char	t_dsuspc;
+	char	t_rprntc;
+	char	t_flushc;
+	char	t_werasc;
+	char	t_lnextc;
+};
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 10
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* c_cc characters */
+#define _VINTR	0
+#define _VQUIT	1
+#define _VERASE	2
+#define _VKILL	3
+#define _VEOF	4
+#define _VMIN	5
+#define _VEOL	6
+#define _VTIME	7
+#define _VEOL2	8
+#define _VSWTC	9
+
+#ifdef __KERNEL__
+/*                   ^C  ^\ del  ^U  ^D   1   0   0   0   0  ^W  ^R  ^Z  ^Q  ^S  ^V  ^U  */
+#define INIT_C_CC "\003\034\177\025\004\001\000\000\000\000\027\022\032\021\023\026\025" 
+#endif
+
+#ifdef __KERNEL__
+
+#include <asm-generic/termios.h>
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _ASM_POWERPC_TERMIOS_H */
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
new file mode 100644
index 000000000000..9665a26a253a
--- /dev/null
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -0,0 +1,161 @@
+/* thread_info.h: PowerPC low-level thread information
+ * adapted from the i386 version by Paul Mackerras
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_POWERPC_THREAD_INFO_H
+#define _ASM_POWERPC_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+/* We have 8k stacks on ppc32 and 16k on ppc64 */
+
+#ifdef CONFIG_PPC64
+#define THREAD_SHIFT		14
+#else
+#define THREAD_SHIFT		13
+#endif
+
+#define THREAD_SIZE		(1 << THREAD_SHIFT)
+
+#ifndef __ASSEMBLY__
+#include <linux/cache.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <linux/stringify.h>
+
+/*
+ * low level task data.
+ */
+struct thread_info {
+	struct task_struct *task;		/* main task structure */
+	struct exec_domain *exec_domain;	/* execution domain */
+	int		cpu;			/* cpu we're on */
+	int		preempt_count;		/* 0 => preemptable,
+						   <0 => BUG */
+	struct restart_block restart_block;
+	unsigned long	local_flags;		/* private flags for thread */
+
+	/* low level flags - has atomic operations done on it */
+	unsigned long	flags ____cacheline_aligned_in_smp;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task =		&tsk,			\
+	.exec_domain =	&default_exec_domain,	\
+	.cpu =		0,			\
+	.preempt_count = 1,			\
+	.restart_block = {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+	.flags =	0,			\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* thread information allocation */
+
+#if THREAD_SHIFT >= PAGE_SHIFT
+
+#define THREAD_SIZE_ORDER	(THREAD_SHIFT - PAGE_SHIFT)
+
+#else /* THREAD_SHIFT < PAGE_SHIFT */
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+extern struct thread_info *alloc_thread_info(struct task_struct *tsk);
+extern void free_thread_info(struct thread_info *ti);
+
+#endif /* THREAD_SHIFT < PAGE_SHIFT */
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	register unsigned long sp asm("r1");
+
+	/* gcc4, at least, is smart enough to turn this into a single
+	 * rlwinm for ppc32 and clrrdi for ppc64 */
+	return (struct thread_info *)(sp & ~(THREAD_SIZE-1));
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE		0x10000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	3	/* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_32BIT		4	/* 32 bit binary */
+#define TIF_PERFMON_WORK	5	/* work for pfm_handle_work() */
+#define TIF_PERFMON_CTXSW	6	/* perfmon needs ctxsw calls */
+#define TIF_SYSCALL_AUDIT	7	/* syscall auditing active */
+#define TIF_SINGLESTEP		8	/* singlestepping active */
+#define TIF_MEMDIE		9
+#define TIF_SECCOMP		10	/* secure computing */
+#define TIF_RESTOREALL		11	/* Restore all regs (implies NOERROR) */
+#define TIF_NOERROR		12	/* Force successful syscall return */
+#define TIF_NOTIFY_RESUME	13	/* callback before returning to user */
+#define TIF_FREEZE		14	/* Freezing for suspend */
+#define TIF_RUNLATCH		15	/* Is the runlatch enabled? */
+#define TIF_ABI_PENDING		16	/* 32/64 bit switch needed */
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_32BIT		(1<<TIF_32BIT)
+#define _TIF_PERFMON_WORK	(1<<TIF_PERFMON_WORK)
+#define _TIF_PERFMON_CTXSW	(1<<TIF_PERFMON_CTXSW)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
+#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
+#define _TIF_RESTOREALL		(1<<TIF_RESTOREALL)
+#define _TIF_NOERROR		(1<<TIF_NOERROR)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_FREEZE		(1<<TIF_FREEZE)
+#define _TIF_RUNLATCH		(1<<TIF_RUNLATCH)
+#define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
+#define _TIF_SYSCALL_T_OR_A	(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP)
+
+#define _TIF_USER_WORK_MASK	(_TIF_SIGPENDING | _TIF_NEED_RESCHED | \
+				 _TIF_NOTIFY_RESUME)
+#define _TIF_PERSYSCALL_MASK	(_TIF_RESTOREALL|_TIF_NOERROR)
+
+/* Bits in local_flags */
+/* Don't move TLF_NAPPING without adjusting the code in entry_32.S */
+#define TLF_NAPPING		0	/* idle thread enabled NAP mode */
+#define TLF_SLEEPING		1	/* suspend code enabled SLEEP mode */
+#define TLF_RESTORE_SIGMASK	2	/* Restore signal mask in do_signal */
+
+#define _TLF_NAPPING		(1 << TLF_NAPPING)
+#define _TLF_SLEEPING		(1 << TLF_SLEEPING)
+#define _TLF_RESTORE_SIGMASK	(1 << TLF_RESTORE_SIGMASK)
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK	1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->local_flags |= _TLF_RESTORE_SIGMASK;
+	set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif	/* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_THREAD_INFO_H */
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
new file mode 100644
index 000000000000..febd581ec9b0
--- /dev/null
+++ b/arch/powerpc/include/asm/time.h
@@ -0,0 +1,255 @@
+/*
+ * Common time prototypes and such for all ppc machines.
+ *
+ * Written by Cort Dougan (cort@cs.nmt.edu) to merge
+ * Paul Mackerras' version and mine for PReP and Pmac.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __POWERPC_TIME_H
+#define __POWERPC_TIME_H
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#include <linux/percpu.h>
+
+#include <asm/processor.h>
+#ifdef CONFIG_PPC_ISERIES
+#include <asm/paca.h>
+#include <asm/firmware.h>
+#include <asm/iseries/hv_call.h>
+#endif
+
+/* time.c */
+extern unsigned long tb_ticks_per_jiffy;
+extern unsigned long tb_ticks_per_usec;
+extern unsigned long tb_ticks_per_sec;
+extern u64 tb_to_xs;
+extern unsigned      tb_to_us;
+
+struct rtc_time;
+extern void to_tm(int tim, struct rtc_time * tm);
+extern void GregorianDay(struct rtc_time *tm);
+extern time_t last_rtc_update;
+
+extern void generic_calibrate_decr(void);
+extern void wakeup_decrementer(void);
+extern void snapshot_timebase(void);
+
+extern void set_dec_cpu6(unsigned int val);
+
+/* Some sane defaults: 125 MHz timebase, 1GHz processor */
+extern unsigned long ppc_proc_freq;
+#define DEFAULT_PROC_FREQ	(DEFAULT_TB_FREQ * 8)
+extern unsigned long ppc_tb_freq;
+#define DEFAULT_TB_FREQ		125000000UL
+
+/*
+ * By putting all of this stuff into a single struct we 
+ * reduce the number of cache lines touched by do_gettimeofday.
+ * Both by collecting all of the data in one cache line and
+ * by touching only one TOC entry on ppc64.
+ */
+struct gettimeofday_vars {
+	u64 tb_to_xs;
+	u64 stamp_xsec;
+	u64 tb_orig_stamp;
+};
+
+struct gettimeofday_struct {
+	unsigned long tb_ticks_per_sec;
+	struct gettimeofday_vars vars[2];
+	struct gettimeofday_vars * volatile varp;
+	unsigned      var_idx;
+	unsigned      tb_to_us;
+};
+
+struct div_result {
+	u64 result_high;
+	u64 result_low;
+};
+
+/* Accessor functions for the timebase (RTC on 601) registers. */
+/* If one day CONFIG_POWER is added just define __USE_RTC as 1 */
+#ifdef CONFIG_6xx
+#define __USE_RTC()	(!cpu_has_feature(CPU_FTR_USE_TB))
+#else
+#define __USE_RTC()	0
+#endif
+
+#ifdef CONFIG_PPC64
+
+/* For compatibility, get_tbl() is defined as get_tb() on ppc64 */
+#define get_tbl		get_tb
+
+#else
+
+static inline unsigned long get_tbl(void)
+{
+#if defined(CONFIG_403GCX)
+	unsigned long tbl;
+	asm volatile("mfspr %0, 0x3dd" : "=r" (tbl));
+	return tbl;
+#else
+	return mftbl();
+#endif
+}
+
+static inline unsigned int get_tbu(void)
+{
+#ifdef CONFIG_403GCX
+	unsigned int tbu;
+	asm volatile("mfspr %0, 0x3dc" : "=r" (tbu));
+	return tbu;
+#else
+	return mftbu();
+#endif
+}
+#endif /* !CONFIG_PPC64 */
+
+static inline unsigned int get_rtcl(void)
+{
+	unsigned int rtcl;
+
+	asm volatile("mfrtcl %0" : "=r" (rtcl));
+	return rtcl;
+}
+
+static inline u64 get_rtc(void)
+{
+	unsigned int hi, lo, hi2;
+
+	do {
+		asm volatile("mfrtcu %0; mfrtcl %1; mfrtcu %2"
+			     : "=r" (hi), "=r" (lo), "=r" (hi2));
+	} while (hi2 != hi);
+	return (u64)hi * 1000000000 + lo;
+}
+
+#ifdef CONFIG_PPC64
+static inline u64 get_tb(void)
+{
+	return mftb();
+}
+#else /* CONFIG_PPC64 */
+static inline u64 get_tb(void)
+{
+	unsigned int tbhi, tblo, tbhi2;
+
+	do {
+		tbhi = get_tbu();
+		tblo = get_tbl();
+		tbhi2 = get_tbu();
+	} while (tbhi != tbhi2);
+
+	return ((u64)tbhi << 32) | tblo;
+}
+#endif /* !CONFIG_PPC64 */
+
+static inline u64 get_tb_or_rtc(void)
+{
+	return __USE_RTC() ? get_rtc() : get_tb();
+}
+
+static inline void set_tb(unsigned int upper, unsigned int lower)
+{
+	mtspr(SPRN_TBWL, 0);
+	mtspr(SPRN_TBWU, upper);
+	mtspr(SPRN_TBWL, lower);
+}
+
+/* Accessor functions for the decrementer register.
+ * The 4xx doesn't even have a decrementer.  I tried to use the
+ * generic timer interrupt code, which seems OK, with the 4xx PIT
+ * in auto-reload mode.  The problem is PIT stops counting when it
+ * hits zero.  If it would wrap, we could use it just like a decrementer.
+ */
+static inline unsigned int get_dec(void)
+{
+#if defined(CONFIG_40x)
+	return (mfspr(SPRN_PIT));
+#else
+	return (mfspr(SPRN_DEC));
+#endif
+}
+
+/*
+ * Note: Book E and 4xx processors differ from other PowerPC processors
+ * in when the decrementer generates its interrupt: on the 1 to 0
+ * transition for Book E/4xx, but on the 0 to -1 transition for others.
+ */
+static inline void set_dec(int val)
+{
+#if defined(CONFIG_40x)
+	mtspr(SPRN_PIT, val);
+#elif defined(CONFIG_8xx_CPU6)
+	set_dec_cpu6(val - 1);
+#else
+#ifndef CONFIG_BOOKE
+	--val;
+#endif
+#ifdef CONFIG_PPC_ISERIES
+	if (firmware_has_feature(FW_FEATURE_ISERIES) &&
+			get_lppaca()->shared_proc) {
+		get_lppaca()->virtual_decr = val;
+		if (get_dec() > val)
+			HvCall_setVirtualDecr();
+		return;
+	}
+#endif
+	mtspr(SPRN_DEC, val);
+#endif /* not 40x or 8xx_CPU6 */
+}
+
+static inline unsigned long tb_ticks_since(unsigned long tstamp)
+{
+	if (__USE_RTC()) {
+		int delta = get_rtcl() - (unsigned int) tstamp;
+		return delta < 0 ? delta + 1000000000 : delta;
+	}
+	return get_tbl() - tstamp;
+}
+
+#define mulhwu(x,y) \
+({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
+
+#ifdef CONFIG_PPC64
+#define mulhdu(x,y) \
+({unsigned long z; asm ("mulhdu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
+#else
+extern u64 mulhdu(u64, u64);
+#endif
+
+extern void smp_space_timers(unsigned int);
+
+extern unsigned mulhwu_scale_factor(unsigned, unsigned);
+extern void div128_by_32(u64 dividend_high, u64 dividend_low,
+			 unsigned divisor, struct div_result *dr);
+
+/* Used to store Processor Utilization register (purr) values */
+
+struct cpu_usage {
+        u64 current_tb;  /* Holds the current purr register values */
+};
+
+DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array);
+
+#if defined(CONFIG_VIRT_CPU_ACCOUNTING)
+extern void calculate_steal_time(void);
+extern void snapshot_timebases(void);
+#define account_process_vtime(tsk)		account_process_tick(tsk, 0)
+#else
+#define calculate_steal_time()			do { } while (0)
+#define snapshot_timebases()			do { } while (0)
+#define account_process_vtime(tsk)		do { } while (0)
+#endif
+
+extern void secondary_cpu_time_init(void);
+extern void iSeries_time_init_early(void);
+
+#endif /* __KERNEL__ */
+#endif /* __POWERPC_TIME_H */
diff --git a/arch/powerpc/include/asm/timex.h b/arch/powerpc/include/asm/timex.h
new file mode 100644
index 000000000000..c55e14f7ef44
--- /dev/null
+++ b/arch/powerpc/include/asm/timex.h
@@ -0,0 +1,50 @@
+#ifndef _ASM_POWERPC_TIMEX_H
+#define _ASM_POWERPC_TIMEX_H
+
+#ifdef __KERNEL__
+
+/*
+ * PowerPC architecture timex specifications
+ */
+
+#include <asm/cputable.h>
+#include <asm/reg.h>
+
+#define CLOCK_TICK_RATE	1024000 /* Underlying HZ */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+#ifdef __powerpc64__
+	return mftb();
+#else
+	cycles_t ret;
+
+	/*
+	 * For the "cycle" counter we use the timebase lower half.
+	 * Currently only used on SMP.
+	 */
+
+	ret = 0;
+
+	__asm__ __volatile__(
+		"97:	mftb %0\n"
+		"99:\n"
+		".section __ftr_fixup,\"a\"\n"
+		".align 2\n"
+		"98:\n"
+		"	.long %1\n"
+		"	.long 0\n"
+		"	.long 97b-98b\n"
+		"	.long 99b-98b\n"
+		"	.long 0\n"
+		"	.long 0\n"
+		".previous"
+		: "=r" (ret) : "i" (CPU_FTR_601));
+	return ret;
+#endif
+}
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_TIMEX_H */
diff --git a/arch/powerpc/include/asm/tlb.h b/arch/powerpc/include/asm/tlb.h
new file mode 100644
index 000000000000..e20ff7541f36
--- /dev/null
+++ b/arch/powerpc/include/asm/tlb.h
@@ -0,0 +1,81 @@
+/*
+ *	TLB shootdown specifics for powerpc
+ *
+ * Copyright (C) 2002 Anton Blanchard, IBM Corp.
+ * Copyright (C) 2002 Paul Mackerras, IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_TLB_H
+#define _ASM_POWERPC_TLB_H
+#ifdef __KERNEL__
+
+#ifndef __powerpc64__
+#include <asm/pgtable.h>
+#endif
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#ifndef __powerpc64__
+#include <asm/page.h>
+#include <asm/mmu.h>
+#endif
+
+#include <linux/pagemap.h>
+
+struct mmu_gather;
+
+#define tlb_start_vma(tlb, vma)	do { } while (0)
+#define tlb_end_vma(tlb, vma)	do { } while (0)
+
+#if !defined(CONFIG_PPC_STD_MMU)
+
+#define tlb_flush(tlb)			flush_tlb_mm((tlb)->mm)
+
+#elif defined(__powerpc64__)
+
+extern void pte_free_finish(void);
+
+static inline void tlb_flush(struct mmu_gather *tlb)
+{
+	struct ppc64_tlb_batch *tlbbatch = &__get_cpu_var(ppc64_tlb_batch);
+
+	/* If there's a TLB batch pending, then we must flush it because the
+	 * pages are going to be freed and we really don't want to have a CPU
+	 * access a freed page because it has a stale TLB
+	 */
+	if (tlbbatch->index)
+		__flush_tlb_pending(tlbbatch);
+
+	pte_free_finish();
+}
+
+#else
+
+extern void tlb_flush(struct mmu_gather *tlb);
+
+#endif
+
+/* Get the generic bits... */
+#include <asm-generic/tlb.h>
+
+#if !defined(CONFIG_PPC_STD_MMU) || defined(__powerpc64__)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
+
+#else
+extern void flush_hash_entry(struct mm_struct *mm, pte_t *ptep,
+			     unsigned long address);
+
+static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep,
+					unsigned long address)
+{
+	if (pte_val(*ptep) & _PAGE_HASHPTE)
+		flush_hash_entry(tlb->mm, ptep, address);
+}
+
+#endif
+#endif /* __KERNEL__ */
+#endif /* __ASM_POWERPC_TLB_H */
diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h
new file mode 100644
index 000000000000..361cd5c7a32b
--- /dev/null
+++ b/arch/powerpc/include/asm/tlbflush.h
@@ -0,0 +1,166 @@
+#ifndef _ASM_POWERPC_TLBFLUSH_H
+#define _ASM_POWERPC_TLBFLUSH_H
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+#ifdef __KERNEL__
+
+#if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE)
+/*
+ * TLB flushing for software loaded TLB chips
+ *
+ * TODO: (CONFIG_FSL_BOOKE) determine if flush_tlb_range &
+ * flush_tlb_kernel_range are best implemented as tlbia vs
+ * specific tlbie's
+ */
+
+#include <linux/mm.h>
+
+extern void _tlbie(unsigned long address, unsigned int pid);
+
+#if defined(CONFIG_40x) || defined(CONFIG_8xx)
+#define _tlbia()	asm volatile ("tlbia; sync" : : : "memory")
+#else /* CONFIG_44x || CONFIG_FSL_BOOKE */
+extern void _tlbia(void);
+#endif
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	_tlbia();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				  unsigned long vmaddr)
+{
+	_tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
+}
+
+static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
+					 unsigned long vmaddr)
+{
+	_tlbie(vmaddr, vma ? vma->vm_mm->context.id : 0);
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+	_tlbia();
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+	_tlbia();
+}
+
+#elif defined(CONFIG_PPC32)
+/*
+ * TLB flushing for "classic" hash-MMMU 32-bit CPUs, 6xx, 7xx, 7xxx
+ */
+extern void _tlbie(unsigned long address);
+extern void _tlbia(void);
+
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
+extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			    unsigned long end);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#else
+/*
+ * TLB flushing for 64-bit has-MMU CPUs
+ */
+
+#include <linux/percpu.h>
+#include <asm/page.h>
+
+#define PPC64_TLB_BATCH_NR 192
+
+struct ppc64_tlb_batch {
+	int			active;
+	unsigned long		index;
+	struct mm_struct	*mm;
+	real_pte_t		pte[PPC64_TLB_BATCH_NR];
+	unsigned long		vaddr[PPC64_TLB_BATCH_NR];
+	unsigned int		psize;
+	int			ssize;
+};
+DECLARE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
+
+extern void __flush_tlb_pending(struct ppc64_tlb_batch *batch);
+
+extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
+			    pte_t *ptep, unsigned long pte, int huge);
+
+#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
+
+static inline void arch_enter_lazy_mmu_mode(void)
+{
+	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
+
+	batch->active = 1;
+}
+
+static inline void arch_leave_lazy_mmu_mode(void)
+{
+	struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch);
+
+	if (batch->index)
+		__flush_tlb_pending(batch);
+	batch->active = 0;
+}
+
+#define arch_flush_lazy_mmu_mode()      do {} while (0)
+
+
+extern void flush_hash_page(unsigned long va, real_pte_t pte, int psize,
+			    int ssize, int local);
+extern void flush_hash_range(unsigned long number, int local);
+
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+				  unsigned long vmaddr)
+{
+}
+
+static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
+					 unsigned long vmaddr)
+{
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+}
+
+/* Private function for use by PCI IO mapping code */
+extern void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,
+				     unsigned long end);
+
+
+#endif
+
+#endif /*__KERNEL__ */
+#endif /* _ASM_POWERPC_TLBFLUSH_H */
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
new file mode 100644
index 000000000000..c32da6f97999
--- /dev/null
+++ b/arch/powerpc/include/asm/topology.h
@@ -0,0 +1,117 @@
+#ifndef _ASM_POWERPC_TOPOLOGY_H
+#define _ASM_POWERPC_TOPOLOGY_H
+#ifdef __KERNEL__
+
+
+struct sys_device;
+struct device_node;
+
+#ifdef CONFIG_NUMA
+
+#include <asm/mmzone.h>
+
+static inline int cpu_to_node(int cpu)
+{
+	return numa_cpu_lookup_table[cpu];
+}
+
+#define parent_node(node)	(node)
+
+static inline cpumask_t node_to_cpumask(int node)
+{
+	return numa_cpumask_lookup_table[node];
+}
+
+static inline int node_to_first_cpu(int node)
+{
+	cpumask_t tmp;
+	tmp = node_to_cpumask(node);
+	return first_cpu(tmp);
+}
+
+int of_node_to_nid(struct device_node *device);
+
+struct pci_bus;
+#ifdef CONFIG_PCI
+extern int pcibus_to_node(struct pci_bus *bus);
+#else
+static inline int pcibus_to_node(struct pci_bus *bus)
+{
+	return -1;
+}
+#endif
+
+#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
+					CPU_MASK_ALL : \
+					node_to_cpumask(pcibus_to_node(bus)) \
+				)
+
+/* sched_domains SD_NODE_INIT for PPC64 machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.child			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 1,			\
+	.busy_idx		= 3,			\
+	.idle_idx		= 1,			\
+	.newidle_idx		= 2,			\
+	.wake_idx		= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_EXEC	\
+				| SD_BALANCE_NEWIDLE	\
+				| SD_WAKE_IDLE		\
+				| SD_SERIALIZE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+
+extern void __init dump_numa_cpu_topology(void);
+
+extern int sysfs_add_device_to_node(struct sys_device *dev, int nid);
+extern void sysfs_remove_device_from_node(struct sys_device *dev, int nid);
+
+#else
+
+static inline int of_node_to_nid(struct device_node *device)
+{
+	return 0;
+}
+
+static inline void dump_numa_cpu_topology(void) {}
+
+static inline int sysfs_add_device_to_node(struct sys_device *dev, int nid)
+{
+	return 0;
+}
+
+static inline void sysfs_remove_device_from_node(struct sys_device *dev,
+						int nid)
+{
+}
+
+#endif /* CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#ifdef CONFIG_SMP
+#include <asm/cputable.h>
+#define smt_capable()		(cpu_has_feature(CPU_FTR_SMT))
+
+#ifdef CONFIG_PPC64
+#include <asm/smp.h>
+
+#define topology_thread_siblings(cpu)	(per_cpu(cpu_sibling_map, cpu))
+#define topology_core_siblings(cpu)	(per_cpu(cpu_core_map, cpu))
+#define topology_core_id(cpu)		(cpu_to_core_id(cpu))
+#endif
+#endif
+
+#endif /* __KERNEL__ */
+#endif	/* _ASM_POWERPC_TOPOLOGY_H */
diff --git a/arch/powerpc/include/asm/tsi108.h b/arch/powerpc/include/asm/tsi108.h
new file mode 100644
index 000000000000..f8b60793b7a9
--- /dev/null
+++ b/arch/powerpc/include/asm/tsi108.h
@@ -0,0 +1,121 @@
+/*
+ * common routine and memory layout for Tundra TSI108(Grendel) host bridge
+ * memory controller.
+ *
+ * Author: Jacob Pan (jacob.pan@freescale.com)
+ *	   Alex Bounine (alexandreb@tundra.com)
+ *
+ * Copyright 2004-2006 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef __PPC_KERNEL_TSI108_H
+#define __PPC_KERNEL_TSI108_H
+
+#include <asm/pci-bridge.h>
+
+/* Size of entire register space */
+#define TSI108_REG_SIZE		(0x10000)
+
+/* Sizes of register spaces for individual blocks */
+#define TSI108_HLP_SIZE		0x1000
+#define TSI108_PCI_SIZE		0x1000
+#define TSI108_CLK_SIZE		0x1000
+#define TSI108_PB_SIZE		0x1000
+#define TSI108_SD_SIZE		0x1000
+#define TSI108_DMA_SIZE		0x1000
+#define TSI108_ETH_SIZE		0x1000
+#define TSI108_I2C_SIZE		0x400
+#define TSI108_MPIC_SIZE	0x400
+#define TSI108_UART0_SIZE	0x200
+#define TSI108_GPIO_SIZE	0x200
+#define TSI108_UART1_SIZE	0x200
+
+/* Offsets within Tsi108(A) CSR space for individual blocks */
+#define TSI108_HLP_OFFSET	0x0000
+#define TSI108_PCI_OFFSET	0x1000
+#define TSI108_CLK_OFFSET	0x2000
+#define TSI108_PB_OFFSET	0x3000
+#define TSI108_SD_OFFSET	0x4000
+#define TSI108_DMA_OFFSET	0x5000
+#define TSI108_ETH_OFFSET	0x6000
+#define TSI108_I2C_OFFSET	0x7000
+#define TSI108_MPIC_OFFSET	0x7400
+#define TSI108_UART0_OFFSET	0x7800
+#define TSI108_GPIO_OFFSET	0x7A00
+#define TSI108_UART1_OFFSET	0x7C00
+
+/* Tsi108 registers used by common code components */
+#define TSI108_PCI_CSR		(0x004)
+#define TSI108_PCI_IRP_CFG_CTL	(0x180)
+#define TSI108_PCI_IRP_STAT	(0x184)
+#define TSI108_PCI_IRP_ENABLE	(0x188)
+#define TSI108_PCI_IRP_INTAD	(0x18C)
+
+#define TSI108_PCI_IRP_STAT_P_INT	(0x00400000)
+#define TSI108_PCI_IRP_ENABLE_P_INT	(0x00400000)
+
+#define TSI108_CG_PWRUP_STATUS	(0x234)
+
+#define TSI108_PB_ISR		(0x00C)
+#define TSI108_PB_ERRCS		(0x404)
+#define TSI108_PB_AERR		(0x408)
+
+#define TSI108_PB_ERRCS_ES		(1 << 1)
+#define TSI108_PB_ISR_PBS_RD_ERR	(1 << 8)
+
+#define TSI108_PCI_CFG_SIZE		(0x01000000)
+
+/*
+ * PHY Configuration Options
+ *
+ * Specify "bcm54xx" in the compatible property of your device tree phy
+ * nodes if your board uses the Broadcom PHYs
+ */
+#define TSI108_PHY_MV88E	0	/* Marvel 88Exxxx PHY */
+#define TSI108_PHY_BCM54XX	1	/* Broardcom BCM54xx PHY */
+
+/* Global variables */
+
+extern u32 tsi108_pci_cfg_base;
+/* Exported functions */
+
+extern int tsi108_bridge_init(struct pci_controller *hose, uint phys_csr_base);
+extern unsigned long tsi108_get_mem_size(void);
+extern unsigned long tsi108_get_cpu_clk(void);
+extern unsigned long tsi108_get_sdc_clk(void);
+extern int tsi108_direct_write_config(struct pci_bus *bus, unsigned int devfn,
+				      int offset, int len, u32 val);
+extern int tsi108_direct_read_config(struct pci_bus *bus, unsigned int devfn,
+				     int offset, int len, u32 * val);
+extern void tsi108_clear_pci_error(u32 pci_cfg_base);
+
+extern phys_addr_t get_csrbase(void);
+
+typedef struct {
+	u32 regs;		/* hw registers base address */
+	u32 phyregs;		/* phy registers base address */
+	u16 phy;		/* phy address */
+	u16 irq_num;		/* irq number */
+	u8 mac_addr[6];		/* phy mac address */
+	u16 phy_type;	/* type of phy on board */
+} hw_info;
+
+extern u32 get_vir_csrbase(void);
+extern u32 tsi108_csr_vir_base;
+
+static inline u32 tsi108_read_reg(u32 reg_offset)
+{
+	return in_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset));
+}
+
+static inline void tsi108_write_reg(u32 reg_offset, u32 val)
+{
+	out_be32((volatile u32 *)(tsi108_csr_vir_base + reg_offset), val);
+}
+
+#endif				/* __PPC_KERNEL_TSI108_H */
diff --git a/arch/powerpc/include/asm/tsi108_irq.h b/arch/powerpc/include/asm/tsi108_irq.h
new file mode 100644
index 000000000000..6ed93979fbe4
--- /dev/null
+++ b/arch/powerpc/include/asm/tsi108_irq.h
@@ -0,0 +1,124 @@
+/*
+ * (C) Copyright 2005 Tundra Semiconductor Corp.
+ * Alex Bounine, <alexandreb at tundra.com).
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * definitions for interrupt controller initialization and external interrupt
+ * demultiplexing on TSI108EMU/SVB boards.
+ */
+
+#ifndef _ASM_POWERPC_TSI108_IRQ_H
+#define _ASM_POWERPC_TSI108_IRQ_H
+
+/*
+ * Tsi108 interrupts
+ */
+#ifndef TSI108_IRQ_REG_BASE
+#define TSI108_IRQ_REG_BASE		0
+#endif
+
+#define TSI108_IRQ(x)		(TSI108_IRQ_REG_BASE + (x))
+
+#define TSI108_MAX_VECTORS	(36 + 4)	/* 36 sources + PCI INT demux */
+#define MAX_TASK_PRIO	0xF
+
+#define TSI108_IRQ_SPURIOUS	(TSI108_MAX_VECTORS)
+
+#define DEFAULT_PRIO_LVL	10	/* initial priority level */
+
+/* Interrupt vectors assignment to external and internal
+ * sources of requests. */
+
+/* EXTERNAL INTERRUPT SOURCES */
+
+#define IRQ_TSI108_EXT_INT0	TSI108_IRQ(0)	/* External Source at INT[0] */
+#define IRQ_TSI108_EXT_INT1	TSI108_IRQ(1)	/* External Source at INT[1] */
+#define IRQ_TSI108_EXT_INT2	TSI108_IRQ(2)	/* External Source at INT[2] */
+#define IRQ_TSI108_EXT_INT3	TSI108_IRQ(3)	/* External Source at INT[3] */
+
+/* INTERNAL INTERRUPT SOURCES */
+
+#define IRQ_TSI108_RESERVED0	TSI108_IRQ(4)	/* Reserved IRQ */
+#define IRQ_TSI108_RESERVED1	TSI108_IRQ(5)	/* Reserved IRQ */
+#define IRQ_TSI108_RESERVED2	TSI108_IRQ(6)	/* Reserved IRQ */
+#define IRQ_TSI108_RESERVED3	TSI108_IRQ(7)	/* Reserved IRQ */
+#define IRQ_TSI108_DMA0		TSI108_IRQ(8)	/* DMA0 */
+#define IRQ_TSI108_DMA1		TSI108_IRQ(9)	/* DMA1 */
+#define IRQ_TSI108_DMA2		TSI108_IRQ(10)	/* DMA2 */
+#define IRQ_TSI108_DMA3		TSI108_IRQ(11)	/* DMA3 */
+#define IRQ_TSI108_UART0	TSI108_IRQ(12)	/* UART0 */
+#define IRQ_TSI108_UART1	TSI108_IRQ(13)	/* UART1 */
+#define IRQ_TSI108_I2C		TSI108_IRQ(14)	/* I2C */
+#define IRQ_TSI108_GPIO		TSI108_IRQ(15)	/* GPIO */
+#define IRQ_TSI108_GIGE0	TSI108_IRQ(16)	/* GIGE0 */
+#define IRQ_TSI108_GIGE1	TSI108_IRQ(17)	/* GIGE1 */
+#define IRQ_TSI108_RESERVED4	TSI108_IRQ(18)	/* Reserved IRQ */
+#define IRQ_TSI108_HLP		TSI108_IRQ(19)	/* HLP */
+#define IRQ_TSI108_SDRAM	TSI108_IRQ(20)	/* SDC */
+#define IRQ_TSI108_PROC_IF	TSI108_IRQ(21)	/* Processor IF */
+#define IRQ_TSI108_RESERVED5	TSI108_IRQ(22)	/* Reserved IRQ */
+#define IRQ_TSI108_PCI		TSI108_IRQ(23)	/* PCI/X block */
+
+#define IRQ_TSI108_MBOX0	TSI108_IRQ(24)	/* Mailbox 0 register */
+#define IRQ_TSI108_MBOX1	TSI108_IRQ(25)	/* Mailbox 1 register */
+#define IRQ_TSI108_MBOX2	TSI108_IRQ(26)	/* Mailbox 2 register */
+#define IRQ_TSI108_MBOX3	TSI108_IRQ(27)	/* Mailbox 3 register */
+
+#define IRQ_TSI108_DBELL0	TSI108_IRQ(28)	/* Doorbell 0 */
+#define IRQ_TSI108_DBELL1	TSI108_IRQ(29)	/* Doorbell 1 */
+#define IRQ_TSI108_DBELL2	TSI108_IRQ(30)	/* Doorbell 2 */
+#define IRQ_TSI108_DBELL3	TSI108_IRQ(31)	/* Doorbell 3 */
+
+#define IRQ_TSI108_TIMER0	TSI108_IRQ(32)	/* Global Timer 0 */
+#define IRQ_TSI108_TIMER1	TSI108_IRQ(33)	/* Global Timer 1 */
+#define IRQ_TSI108_TIMER2	TSI108_IRQ(34)	/* Global Timer 2 */
+#define IRQ_TSI108_TIMER3	TSI108_IRQ(35)	/* Global Timer 3 */
+
+/*
+ * PCI bus INTA# - INTD# lines demultiplexor
+ */
+#define IRQ_PCI_INTAD_BASE	TSI108_IRQ(36)
+#define IRQ_PCI_INTA		(IRQ_PCI_INTAD_BASE + 0)
+#define IRQ_PCI_INTB		(IRQ_PCI_INTAD_BASE + 1)
+#define IRQ_PCI_INTC		(IRQ_PCI_INTAD_BASE + 2)
+#define IRQ_PCI_INTD		(IRQ_PCI_INTAD_BASE + 3)
+#define NUM_PCI_IRQS		(4)
+
+/* number of entries in vector dispatch table */
+#define IRQ_TSI108_TAB_SIZE	(TSI108_MAX_VECTORS + 1)
+
+/* Mapping of MPIC outputs to processors' interrupt pins */
+
+#define IDIR_INT_OUT0		0x1
+#define IDIR_INT_OUT1		0x2
+#define IDIR_INT_OUT2		0x4
+#define IDIR_INT_OUT3		0x8
+
+/*---------------------------------------------------------------
+ * IRQ line configuration parameters */
+
+/* Interrupt delivery modes */
+typedef enum {
+	TSI108_IRQ_DIRECTED,
+	TSI108_IRQ_DISTRIBUTED,
+} TSI108_IRQ_MODE;
+#endif				/*  _ASM_POWERPC_TSI108_IRQ_H */
diff --git a/arch/powerpc/include/asm/tsi108_pci.h b/arch/powerpc/include/asm/tsi108_pci.h
new file mode 100644
index 000000000000..5653d7cc3e24
--- /dev/null
+++ b/arch/powerpc/include/asm/tsi108_pci.h
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2007 IBM Corp
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_TSI108_PCI_H
+#define _ASM_POWERPC_TSI108_PCI_H
+
+#include <asm/tsi108.h>
+
+/* Register definitions */
+#define TSI108_PCI_P2O_BAR0 (TSI108_PCI_OFFSET + 0x10)
+#define TSI108_PCI_P2O_BAR0_UPPER (TSI108_PCI_OFFSET + 0x14)
+#define TSI108_PCI_P2O_BAR2 (TSI108_PCI_OFFSET + 0x18)
+#define TSI108_PCI_P2O_BAR2_UPPER (TSI108_PCI_OFFSET + 0x1c)
+#define TSI108_PCI_P2O_PAGE_SIZES (TSI108_PCI_OFFSET + 0x4c)
+#define TSI108_PCI_PFAB_BAR0 (TSI108_PCI_OFFSET + 0x204)
+#define TSI108_PCI_PFAB_BAR0_UPPER (TSI108_PCI_OFFSET + 0x208)
+#define TSI108_PCI_PFAB_IO (TSI108_PCI_OFFSET + 0x20c)
+#define TSI108_PCI_PFAB_IO_UPPER (TSI108_PCI_OFFSET + 0x210)
+#define TSI108_PCI_PFAB_MEM32 (TSI108_PCI_OFFSET + 0x214)
+#define TSI108_PCI_PFAB_PFM3 (TSI108_PCI_OFFSET + 0x220)
+#define TSI108_PCI_PFAB_PFM4 (TSI108_PCI_OFFSET + 0x230)
+
+extern int tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary);
+extern void tsi108_pci_int_init(struct device_node *node);
+extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc);
+extern void tsi108_clear_pci_cfg_error(void);
+
+#endif				/*  _ASM_POWERPC_TSI108_PCI_H */
diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
new file mode 100644
index 000000000000..d3374bc865ba
--- /dev/null
+++ b/arch/powerpc/include/asm/types.h
@@ -0,0 +1,75 @@
+#ifndef _ASM_POWERPC_TYPES_H
+#define _ASM_POWERPC_TYPES_H
+
+#ifdef __powerpc64__
+# include <asm-generic/int-l64.h>
+#else
+# include <asm-generic/int-ll64.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __powerpc64__
+typedef unsigned int umode_t;
+#else
+typedef unsigned short umode_t;
+#endif
+
+typedef struct {
+	__u32 u[4];
+} __attribute__((aligned(16))) __vector128;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __powerpc64__
+#define BITS_PER_LONG 64
+#else
+#define BITS_PER_LONG 32
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef __vector128 vector128;
+
+/* Physical address used by some IO functions */
+#if defined(CONFIG_PPC64) || defined(CONFIG_PHYS_64BIT)
+typedef u64 phys_addr_t;
+#else
+typedef u32 phys_addr_t;
+#endif
+
+#ifdef __powerpc64__
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif
+typedef u64 dma64_addr_t;
+
+typedef struct {
+	unsigned long entry;
+	unsigned long toc;
+	unsigned long env;
+} func_descr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_TYPES_H */
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
new file mode 100644
index 000000000000..bd0fb8495154
--- /dev/null
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -0,0 +1,496 @@
+#ifndef _ARCH_POWERPC_UACCESS_H
+#define _ARCH_POWERPC_UACCESS_H
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <asm/asm-compat.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ *
+ * The fs/ds values are now the highest legal address in the "segment".
+ * This simplifies the checking in the routines below.
+ */
+
+#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })
+
+#define KERNEL_DS	MAKE_MM_SEG(~0UL)
+#ifdef __powerpc64__
+/* We use TASK_SIZE_USER64 as TASK_SIZE is not constant */
+#define USER_DS		MAKE_MM_SEG(TASK_SIZE_USER64 - 1)
+#else
+#define USER_DS		MAKE_MM_SEG(TASK_SIZE - 1)
+#endif
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current->thread.fs)
+#define set_fs(val)	(current->thread.fs = (val))
+
+#define segment_eq(a, b)	((a).seg == (b).seg)
+
+#ifdef __powerpc64__
+/*
+ * This check is sufficient because there is a large enough
+ * gap between user addresses and the kernel addresses
+ */
+#define __access_ok(addr, size, segment)	\
+	(((addr) <= (segment).seg) && ((size) <= (segment).seg))
+
+#else
+
+#define __access_ok(addr, size, segment)	\
+	(((addr) <= (segment).seg) &&		\
+	 (((size) == 0) || (((size) - 1) <= ((segment).seg - (addr)))))
+
+#endif
+
+#define access_ok(type, addr, size)		\
+	(__chk_user_ptr(addr),			\
+	 __access_ok((__force unsigned long)(addr), (size), get_fs()))
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+	unsigned long insn;
+	unsigned long fixup;
+};
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ *
+ * As we use the same address space for kernel and user data on the
+ * PowerPC, we can just do these as direct assignments.  (Of course, the
+ * exception handling means that it's no longer "just"...)
+ *
+ * The "user64" versions of the user access functions are versions that
+ * allow access of 64-bit data. The "get_user" functions do not
+ * properly handle 64-bit data because the value gets down cast to a long.
+ * The "put_user" functions already handle 64-bit data properly but we add
+ * "user64" versions for completeness
+ */
+#define get_user(x, ptr) \
+	__get_user_check((x), (ptr), sizeof(*(ptr)))
+#define put_user(x, ptr) \
+	__put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+#define __get_user(x, ptr) \
+	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __put_user(x, ptr) \
+	__put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+#ifndef __powerpc64__
+#define __get_user64(x, ptr) \
+	__get_user64_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __put_user64(x, ptr) __put_user(x, ptr)
+#endif
+
+#define __get_user_inatomic(x, ptr) \
+	__get_user_nosleep((x), (ptr), sizeof(*(ptr)))
+#define __put_user_inatomic(x, ptr) \
+	__put_user_nosleep((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+#define __get_user_unaligned __get_user
+#define __put_user_unaligned __put_user
+
+extern long __put_user_bad(void);
+
+/*
+ * We don't tell gcc that we are accessing memory, but this is OK
+ * because we do not write to any memory gcc knows about, so there
+ * are no aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, op)			\
+	__asm__ __volatile__(					\
+		"1:	" op " %1,0(%2)	# put_user\n"		\
+		"2:\n"						\
+		".section .fixup,\"ax\"\n"			\
+		"3:	li %0,%3\n"				\
+		"	b 2b\n"					\
+		".previous\n"					\
+		".section __ex_table,\"a\"\n"			\
+			PPC_LONG_ALIGN "\n"			\
+			PPC_LONG "1b,3b\n"			\
+		".previous"					\
+		: "=r" (err)					\
+		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
+
+#ifdef __powerpc64__
+#define __put_user_asm2(x, ptr, retval)				\
+	  __put_user_asm(x, ptr, retval, "std")
+#else /* __powerpc64__ */
+#define __put_user_asm2(x, addr, err)				\
+	__asm__ __volatile__(					\
+		"1:	stw %1,0(%2)\n"				\
+		"2:	stw %1+1,4(%2)\n"			\
+		"3:\n"						\
+		".section .fixup,\"ax\"\n"			\
+		"4:	li %0,%3\n"				\
+		"	b 3b\n"					\
+		".previous\n"					\
+		".section __ex_table,\"a\"\n"			\
+			PPC_LONG_ALIGN "\n"			\
+			PPC_LONG "1b,4b\n"			\
+			PPC_LONG "2b,4b\n"			\
+		".previous"					\
+		: "=r" (err)					\
+		: "r" (x), "b" (addr), "i" (-EFAULT), "0" (err))
+#endif /* __powerpc64__ */
+
+#define __put_user_size(x, ptr, size, retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	  case 1: __put_user_asm(x, ptr, retval, "stb"); break;	\
+	  case 2: __put_user_asm(x, ptr, retval, "sth"); break;	\
+	  case 4: __put_user_asm(x, ptr, retval, "stw"); break;	\
+	  case 8: __put_user_asm2(x, ptr, retval); break;	\
+	  default: __put_user_bad();				\
+	}							\
+} while (0)
+
+#define __put_user_nocheck(x, ptr, size)			\
+({								\
+	long __pu_err;						\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	if (!is_kernel_addr((unsigned long)__pu_addr))		\
+		might_sleep();					\
+	__chk_user_ptr(ptr);					\
+	__put_user_size((x), __pu_addr, (size), __pu_err);	\
+	__pu_err;						\
+})
+
+#define __put_user_check(x, ptr, size)					\
+({									\
+	long __pu_err = -EFAULT;					\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);			\
+	might_sleep();							\
+	if (access_ok(VERIFY_WRITE, __pu_addr, size))			\
+		__put_user_size((x), __pu_addr, (size), __pu_err);	\
+	__pu_err;							\
+})
+
+#define __put_user_nosleep(x, ptr, size)			\
+({								\
+	long __pu_err;						\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	__chk_user_ptr(ptr);					\
+	__put_user_size((x), __pu_addr, (size), __pu_err);	\
+	__pu_err;						\
+})
+
+
+extern long __get_user_bad(void);
+
+#define __get_user_asm(x, addr, err, op)		\
+	__asm__ __volatile__(				\
+		"1:	"op" %1,0(%2)	# get_user\n"	\
+		"2:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"3:	li %0,%3\n"			\
+		"	li %1,0\n"			\
+		"	b 2b\n"				\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+			PPC_LONG_ALIGN "\n"		\
+			PPC_LONG "1b,3b\n"		\
+		".previous"				\
+		: "=r" (err), "=r" (x)			\
+		: "b" (addr), "i" (-EFAULT), "0" (err))
+
+#ifdef __powerpc64__
+#define __get_user_asm2(x, addr, err)			\
+	__get_user_asm(x, addr, err, "ld")
+#else /* __powerpc64__ */
+#define __get_user_asm2(x, addr, err)			\
+	__asm__ __volatile__(				\
+		"1:	lwz %1,0(%2)\n"			\
+		"2:	lwz %1+1,4(%2)\n"		\
+		"3:\n"					\
+		".section .fixup,\"ax\"\n"		\
+		"4:	li %0,%3\n"			\
+		"	li %1,0\n"			\
+		"	li %1+1,0\n"			\
+		"	b 3b\n"				\
+		".previous\n"				\
+		".section __ex_table,\"a\"\n"		\
+			PPC_LONG_ALIGN "\n"		\
+			PPC_LONG "1b,4b\n"		\
+			PPC_LONG "2b,4b\n"		\
+		".previous"				\
+		: "=r" (err), "=&r" (x)			\
+		: "b" (addr), "i" (-EFAULT), "0" (err))
+#endif /* __powerpc64__ */
+
+#define __get_user_size(x, ptr, size, retval)			\
+do {								\
+	retval = 0;						\
+	__chk_user_ptr(ptr);					\
+	if (size > sizeof(x))					\
+		(x) = __get_user_bad();				\
+	switch (size) {						\
+	case 1: __get_user_asm(x, ptr, retval, "lbz"); break;	\
+	case 2: __get_user_asm(x, ptr, retval, "lhz"); break;	\
+	case 4: __get_user_asm(x, ptr, retval, "lwz"); break;	\
+	case 8: __get_user_asm2(x, ptr, retval);  break;	\
+	default: (x) = __get_user_bad();			\
+	}							\
+} while (0)
+
+#define __get_user_nocheck(x, ptr, size)			\
+({								\
+	long __gu_err;						\
+	unsigned long __gu_val;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
+	__chk_user_ptr(ptr);					\
+	if (!is_kernel_addr((unsigned long)__gu_addr))		\
+		might_sleep();					\
+	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+#ifndef __powerpc64__
+#define __get_user64_nocheck(x, ptr, size)			\
+({								\
+	long __gu_err;						\
+	long long __gu_val;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
+	__chk_user_ptr(ptr);					\
+	if (!is_kernel_addr((unsigned long)__gu_addr))		\
+		might_sleep();					\
+	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+#endif /* __powerpc64__ */
+
+#define __get_user_check(x, ptr, size)					\
+({									\
+	long __gu_err = -EFAULT;					\
+	unsigned long  __gu_val = 0;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);		\
+	might_sleep();							\
+	if (access_ok(VERIFY_READ, __gu_addr, (size)))			\
+		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+	__gu_err;							\
+})
+
+#define __get_user_nosleep(x, ptr, size)			\
+({								\
+	long __gu_err;						\
+	unsigned long __gu_val;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
+	__chk_user_ptr(ptr);					\
+	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+
+/* more complex routines */
+
+extern unsigned long __copy_tofrom_user(void __user *to,
+		const void __user *from, unsigned long size);
+
+#ifndef __powerpc64__
+
+static inline unsigned long copy_from_user(void *to,
+		const void __user *from, unsigned long n)
+{
+	unsigned long over;
+
+	if (access_ok(VERIFY_READ, from, n))
+		return __copy_tofrom_user((__force void __user *)to, from, n);
+	if ((unsigned long)from < TASK_SIZE) {
+		over = (unsigned long)from + n - TASK_SIZE;
+		return __copy_tofrom_user((__force void __user *)to, from,
+				n - over) + over;
+	}
+	return n;
+}
+
+static inline unsigned long copy_to_user(void __user *to,
+		const void *from, unsigned long n)
+{
+	unsigned long over;
+
+	if (access_ok(VERIFY_WRITE, to, n))
+		return __copy_tofrom_user(to, (__force void __user *)from, n);
+	if ((unsigned long)to < TASK_SIZE) {
+		over = (unsigned long)to + n - TASK_SIZE;
+		return __copy_tofrom_user(to, (__force void __user *)from,
+				n - over) + over;
+	}
+	return n;
+}
+
+#else /* __powerpc64__ */
+
+#define __copy_in_user(to, from, size) \
+	__copy_tofrom_user((to), (from), (size))
+
+extern unsigned long copy_from_user(void *to, const void __user *from,
+				    unsigned long n);
+extern unsigned long copy_to_user(void __user *to, const void *from,
+				  unsigned long n);
+extern unsigned long copy_in_user(void __user *to, const void __user *from,
+				  unsigned long n);
+
+#endif /* __powerpc64__ */
+
+static inline unsigned long __copy_from_user_inatomic(void *to,
+		const void __user *from, unsigned long n)
+{
+	if (__builtin_constant_p(n) && (n <= 8)) {
+		unsigned long ret = 1;
+
+		switch (n) {
+		case 1:
+			__get_user_size(*(u8 *)to, from, 1, ret);
+			break;
+		case 2:
+			__get_user_size(*(u16 *)to, from, 2, ret);
+			break;
+		case 4:
+			__get_user_size(*(u32 *)to, from, 4, ret);
+			break;
+		case 8:
+			__get_user_size(*(u64 *)to, from, 8, ret);
+			break;
+		}
+		if (ret == 0)
+			return 0;
+	}
+	return __copy_tofrom_user((__force void __user *)to, from, n);
+}
+
+static inline unsigned long __copy_to_user_inatomic(void __user *to,
+		const void *from, unsigned long n)
+{
+	if (__builtin_constant_p(n) && (n <= 8)) {
+		unsigned long ret = 1;
+
+		switch (n) {
+		case 1:
+			__put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret);
+			break;
+		case 2:
+			__put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret);
+			break;
+		case 4:
+			__put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret);
+			break;
+		case 8:
+			__put_user_size(*(u64 *)from, (u64 __user *)to, 8, ret);
+			break;
+		}
+		if (ret == 0)
+			return 0;
+	}
+	return __copy_tofrom_user(to, (__force const void __user *)from, n);
+}
+
+static inline unsigned long __copy_from_user(void *to,
+		const void __user *from, unsigned long size)
+{
+	might_sleep();
+	return __copy_from_user_inatomic(to, from, size);
+}
+
+static inline unsigned long __copy_to_user(void __user *to,
+		const void *from, unsigned long size)
+{
+	might_sleep();
+	return __copy_to_user_inatomic(to, from, size);
+}
+
+extern unsigned long __clear_user(void __user *addr, unsigned long size);
+
+static inline unsigned long clear_user(void __user *addr, unsigned long size)
+{
+	might_sleep();
+	if (likely(access_ok(VERIFY_WRITE, addr, size)))
+		return __clear_user(addr, size);
+	if ((unsigned long)addr < TASK_SIZE) {
+		unsigned long over = (unsigned long)addr + size - TASK_SIZE;
+		return __clear_user(addr, size - over) + over;
+	}
+	return size;
+}
+
+extern int __strncpy_from_user(char *dst, const char __user *src, long count);
+
+static inline long strncpy_from_user(char *dst, const char __user *src,
+		long count)
+{
+	might_sleep();
+	if (likely(access_ok(VERIFY_READ, src, 1)))
+		return __strncpy_from_user(dst, src, count);
+	return -EFAULT;
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 for error
+ */
+extern int __strnlen_user(const char __user *str, long len, unsigned long top);
+
+/*
+ * Returns the length of the string at str (including the null byte),
+ * or 0 if we hit a page we can't access,
+ * or something > len if we didn't find a null byte.
+ *
+ * The `top' parameter to __strnlen_user is to make sure that
+ * we can never overflow from the user area into kernel space.
+ */
+static inline int strnlen_user(const char __user *str, long len)
+{
+	unsigned long top = current->thread.fs.seg;
+
+	if ((unsigned long)str > top)
+		return 0;
+	return __strnlen_user(str, len, top);
+}
+
+#define strlen_user(str)	strnlen_user((str), 0x7ffffffe)
+
+#endif  /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+
+#endif	/* _ARCH_POWERPC_UACCESS_H */
diff --git a/arch/powerpc/include/asm/ucc.h b/arch/powerpc/include/asm/ucc.h
new file mode 100644
index 000000000000..46b09ba6bead
--- /dev/null
+++ b/arch/powerpc/include/asm/ucc.h
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC unit routines.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_H__
+#define __UCC_H__
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#define STATISTICS
+
+#define UCC_MAX_NUM	8
+
+/* Slow or fast type for UCCs.
+*/
+enum ucc_speed_type {
+	UCC_SPEED_TYPE_FAST = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX,
+	UCC_SPEED_TYPE_SLOW = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX
+};
+
+/* ucc_set_type
+ * Sets UCC to slow or fast mode.
+ *
+ * ucc_num - (In) number of UCC (0-7).
+ * speed   - (In) slow or fast mode for UCC.
+ */
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed);
+
+int ucc_set_qe_mux_mii_mng(unsigned int ucc_num);
+
+int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
+	enum comm_dir mode);
+
+int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask);
+
+/* QE MUX clock routing for UCC
+*/
+static inline int ucc_set_qe_mux_grant(unsigned int ucc_num, int set)
+{
+	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_GRANT);
+}
+
+static inline int ucc_set_qe_mux_tsa(unsigned int ucc_num, int set)
+{
+	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_TSA);
+}
+
+static inline int ucc_set_qe_mux_bkpt(unsigned int ucc_num, int set)
+{
+	return ucc_mux_set_grant_tsa_bkpt(ucc_num, set, QE_CMXUCR_BKPT);
+}
+
+#endif				/* __UCC_H__ */
diff --git a/arch/powerpc/include/asm/ucc_fast.h b/arch/powerpc/include/asm/ucc_fast.h
new file mode 100644
index 000000000000..839aab8bf37d
--- /dev/null
+++ b/arch/powerpc/include/asm/ucc_fast.h
@@ -0,0 +1,244 @@
+/*
+ * Internal header file for UCC FAST unit routines.
+ *
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_FAST_H__
+#define __UCC_FAST_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+/* Receive BD's status */
+#define R_E	0x80000000	/* buffer empty */
+#define R_W	0x20000000	/* wrap bit */
+#define R_I	0x10000000	/* interrupt on reception */
+#define R_L	0x08000000	/* last */
+#define R_F	0x04000000	/* first */
+
+/* transmit BD's status */
+#define T_R	0x80000000	/* ready bit */
+#define T_W	0x20000000	/* wrap bit */
+#define T_I	0x10000000	/* interrupt on completion */
+#define T_L	0x08000000	/* last */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases */
+#define UCC_FAST_RX_ALIGN			4
+#define UCC_FAST_MRBLR_ALIGNMENT		4
+#define UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT	8
+
+/* Sizes */
+#define UCC_FAST_URFS_MIN_VAL				0x88
+#define UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR	8
+
+/* ucc_fast_channel_protocol_mode - UCC FAST mode */
+enum ucc_fast_channel_protocol_mode {
+	UCC_FAST_PROTOCOL_MODE_HDLC = 0x00000000,
+	UCC_FAST_PROTOCOL_MODE_RESERVED01 = 0x00000001,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_QMC = 0x00000002,
+	UCC_FAST_PROTOCOL_MODE_RESERVED02 = 0x00000003,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_UART = 0x00000004,
+	UCC_FAST_PROTOCOL_MODE_RESERVED03 = 0x00000005,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_1 = 0x00000006,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_EX_MAC_2 = 0x00000007,
+	UCC_FAST_PROTOCOL_MODE_RESERVED_BISYNC = 0x00000008,
+	UCC_FAST_PROTOCOL_MODE_RESERVED04 = 0x00000009,
+	UCC_FAST_PROTOCOL_MODE_ATM = 0x0000000A,
+	UCC_FAST_PROTOCOL_MODE_RESERVED05 = 0x0000000B,
+	UCC_FAST_PROTOCOL_MODE_ETHERNET = 0x0000000C,
+	UCC_FAST_PROTOCOL_MODE_RESERVED06 = 0x0000000D,
+	UCC_FAST_PROTOCOL_MODE_POS = 0x0000000E,
+	UCC_FAST_PROTOCOL_MODE_RESERVED07 = 0x0000000F
+};
+
+/* ucc_fast_transparent_txrx - UCC Fast Transparent TX & RX */
+enum ucc_fast_transparent_txrx {
+	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_NORMAL = 0x00000000,
+	UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT = 0x18000000
+};
+
+/* UCC fast diagnostic mode */
+enum ucc_fast_diag_mode {
+	UCC_FAST_DIAGNOSTIC_NORMAL = 0x0,
+	UCC_FAST_DIAGNOSTIC_LOCAL_LOOP_BACK = 0x40000000,
+	UCC_FAST_DIAGNOSTIC_AUTO_ECHO = 0x80000000,
+	UCC_FAST_DIAGNOSTIC_LOOP_BACK_AND_ECHO = 0xC0000000
+};
+
+/* UCC fast Sync length (transparent mode only) */
+enum ucc_fast_sync_len {
+	UCC_FAST_SYNC_LEN_NOT_USED = 0x0,
+	UCC_FAST_SYNC_LEN_AUTOMATIC = 0x00004000,
+	UCC_FAST_SYNC_LEN_8_BIT = 0x00008000,
+	UCC_FAST_SYNC_LEN_16_BIT = 0x0000C000
+};
+
+/* UCC fast RTS mode */
+enum ucc_fast_ready_to_send {
+	UCC_FAST_SEND_IDLES_BETWEEN_FRAMES = 0x00000000,
+	UCC_FAST_SEND_FLAGS_BETWEEN_FRAMES = 0x00002000
+};
+
+/* UCC fast receiver decoding mode */
+enum ucc_fast_rx_decoding_method {
+	UCC_FAST_RX_ENCODING_NRZ = 0x00000000,
+	UCC_FAST_RX_ENCODING_NRZI = 0x00000800,
+	UCC_FAST_RX_ENCODING_RESERVED0 = 0x00001000,
+	UCC_FAST_RX_ENCODING_RESERVED1 = 0x00001800
+};
+
+/* UCC fast transmitter encoding mode */
+enum ucc_fast_tx_encoding_method {
+	UCC_FAST_TX_ENCODING_NRZ = 0x00000000,
+	UCC_FAST_TX_ENCODING_NRZI = 0x00000100,
+	UCC_FAST_TX_ENCODING_RESERVED0 = 0x00000200,
+	UCC_FAST_TX_ENCODING_RESERVED1 = 0x00000300
+};
+
+/* UCC fast CRC length */
+enum ucc_fast_transparent_tcrc {
+	UCC_FAST_16_BIT_CRC = 0x00000000,
+	UCC_FAST_CRC_RESERVED0 = 0x00000040,
+	UCC_FAST_32_BIT_CRC = 0x00000080,
+	UCC_FAST_CRC_RESERVED1 = 0x000000C0
+};
+
+/* Fast UCC initialization structure */
+struct ucc_fast_info {
+	int ucc_num;
+	enum qe_clock rx_clock;
+	enum qe_clock tx_clock;
+	u32 regs;
+	int irq;
+	u32 uccm_mask;
+	int bd_mem_part;
+	int brkpt_support;
+	int grant_support;
+	int tsa;
+	int cdp;
+	int cds;
+	int ctsp;
+	int ctss;
+	int tci;
+	int txsy;
+	int rtsm;
+	int revd;
+	int rsyn;
+	u16 max_rx_buf_length;
+	u16 urfs;
+	u16 urfet;
+	u16 urfset;
+	u16 utfs;
+	u16 utfet;
+	u16 utftt;
+	u16 ufpt;
+	enum ucc_fast_channel_protocol_mode mode;
+	enum ucc_fast_transparent_txrx ttx_trx;
+	enum ucc_fast_tx_encoding_method tenc;
+	enum ucc_fast_rx_decoding_method renc;
+	enum ucc_fast_transparent_tcrc tcrc;
+	enum ucc_fast_sync_len synl;
+};
+
+struct ucc_fast_private {
+	struct ucc_fast_info *uf_info;
+	struct ucc_fast __iomem *uf_regs; /* a pointer to the UCC regs. */
+	u32 __iomem *p_ucce;	/* a pointer to the event register in memory. */
+	u32 __iomem *p_uccm;	/* a pointer to the mask register in memory. */
+#ifdef CONFIG_UGETH_TX_ON_DEMAND
+	u16 __iomem *p_utodr;	/* pointer to the transmit on demand register */
+#endif
+	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
+	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
+	int stopped_tx;		/* Whether channel has been stopped for Tx
+				   (STOP_TX, etc.) */
+	int stopped_rx;		/* Whether channel has been stopped for Rx */
+	u32 ucc_fast_tx_virtual_fifo_base_offset;/* pointer to base of Tx
+						    virtual fifo */
+	u32 ucc_fast_rx_virtual_fifo_base_offset;/* pointer to base of Rx
+						    virtual fifo */
+#ifdef STATISTICS
+	u32 tx_frames;		/* Transmitted frames counter. */
+	u32 rx_frames;		/* Received frames counter (only frames
+				   passed to application). */
+	u32 tx_discarded;	/* Discarded tx frames counter (frames that
+				   were discarded by the driver due to errors).
+				   */
+	u32 rx_discarded;	/* Discarded rx frames counter (frames that
+				   were discarded by the driver due to errors).
+				   */
+#endif				/* STATISTICS */
+	u16 mrblr;		/* maximum receive buffer length */
+};
+
+/* ucc_fast_init
+ * Initializes Fast UCC according to user provided parameters.
+ *
+ * uf_info  - (In) pointer to the fast UCC info structure.
+ * uccf_ret - (Out) pointer to the fast UCC structure.
+ */
+int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret);
+
+/* ucc_fast_free
+ * Frees all resources for fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_free(struct ucc_fast_private * uccf);
+
+/* ucc_fast_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode);
+
+/* ucc_fast_irq
+ * Handles interrupts on fast UCC.
+ * Called from the general interrupt routine to handle interrupts on fast UCC.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_irq(struct ucc_fast_private * uccf);
+
+/* ucc_fast_transmit_on_demand
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccf - (In) pointer to the fast UCC structure.
+ */
+void ucc_fast_transmit_on_demand(struct ucc_fast_private * uccf);
+
+u32 ucc_fast_get_qe_cr_subblock(int uccf_num);
+
+void ucc_fast_dump_regs(struct ucc_fast_private * uccf);
+
+#endif				/* __UCC_FAST_H__ */
diff --git a/arch/powerpc/include/asm/ucc_slow.h b/arch/powerpc/include/asm/ucc_slow.h
new file mode 100644
index 000000000000..0980e6ad335b
--- /dev/null
+++ b/arch/powerpc/include/asm/ucc_slow.h
@@ -0,0 +1,290 @@
+/*
+ * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
+ *
+ * Authors: 	Shlomi Gridish <gridish@freescale.com>
+ * 		Li Yang <leoli@freescale.com>
+ *
+ * Description:
+ * Internal header file for UCC SLOW unit routines.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef __UCC_SLOW_H__
+#define __UCC_SLOW_H__
+
+#include <linux/kernel.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+#include "ucc.h"
+
+/* transmit BD's status */
+#define T_R	0x80000000	/* ready bit */
+#define T_PAD	0x40000000	/* add pads to short frames */
+#define T_W	0x20000000	/* wrap bit */
+#define T_I	0x10000000	/* interrupt on completion */
+#define T_L	0x08000000	/* last */
+
+#define T_A	0x04000000	/* Address - the data transmitted as address
+				   chars */
+#define T_TC	0x04000000	/* transmit CRC */
+#define T_CM	0x02000000	/* continuous mode */
+#define T_DEF	0x02000000	/* collision on previous attempt to transmit */
+#define T_P	0x01000000	/* Preamble - send Preamble sequence before
+				   data */
+#define T_HB	0x01000000	/* heartbeat */
+#define T_NS	0x00800000	/* No Stop */
+#define T_LC	0x00800000	/* late collision */
+#define T_RL	0x00400000	/* retransmission limit */
+#define T_UN	0x00020000	/* underrun */
+#define T_CT	0x00010000	/* CTS lost */
+#define T_CSL	0x00010000	/* carrier sense lost */
+#define T_RC	0x003c0000	/* retry count */
+
+/* Receive BD's status */
+#define R_E	0x80000000	/* buffer empty */
+#define R_W	0x20000000	/* wrap bit */
+#define R_I	0x10000000	/* interrupt on reception */
+#define R_L	0x08000000	/* last */
+#define R_C	0x08000000	/* the last byte in this buffer is a cntl
+				   char */
+#define R_F	0x04000000	/* first */
+#define R_A	0x04000000	/* the first byte in this buffer is address
+				   byte */
+#define R_CM	0x02000000	/* continuous mode */
+#define R_ID	0x01000000	/* buffer close on reception of idles */
+#define R_M	0x01000000	/* Frame received because of promiscuous
+				   mode */
+#define R_AM	0x00800000	/* Address match */
+#define R_DE	0x00800000	/* Address match */
+#define R_LG	0x00200000	/* Break received */
+#define R_BR	0x00200000	/* Frame length violation */
+#define R_NO	0x00100000	/* Rx Non Octet Aligned Packet */
+#define R_FR	0x00100000	/* Framing Error (no stop bit) character
+				   received */
+#define R_PR	0x00080000	/* Parity Error character received */
+#define R_AB	0x00080000	/* Frame Aborted */
+#define R_SH	0x00080000	/* frame is too short */
+#define R_CR	0x00040000	/* CRC Error */
+#define R_OV	0x00020000	/* Overrun */
+#define R_CD	0x00010000	/* CD lost */
+#define R_CL	0x00010000	/* this frame is closed because of a
+				   collision */
+
+/* Rx Data buffer must be 4 bytes aligned in most cases.*/
+#define UCC_SLOW_RX_ALIGN		4
+#define UCC_SLOW_MRBLR_ALIGNMENT	4
+#define UCC_SLOW_PRAM_SIZE		0x100
+#define ALIGNMENT_OF_UCC_SLOW_PRAM	64
+
+/* UCC Slow Channel Protocol Mode */
+enum ucc_slow_channel_protocol_mode {
+	UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002,
+	UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004,
+	UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008,
+};
+
+/* UCC Slow Transparent Transmit CRC (TCRC) */
+enum ucc_slow_transparent_tcrc {
+	/* 16-bit CCITT CRC (HDLC).  (X16 + X12 + X5 + 1) */
+	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000,
+	/* CRC16 (BISYNC).  (X16 + X15 + X2 + 1) */
+	UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000,
+	/* 32-bit CCITT CRC (Ethernet and HDLC) */
+	UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000,
+};
+
+/* UCC Slow oversampling rate for transmitter (TDCR) */
+enum ucc_slow_tx_oversampling_rate {
+	/* 1x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000,
+	/* 8x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000,
+	/* 16x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000,
+	/* 32x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000,
+};
+
+/* UCC Slow Oversampling rate for receiver (RDCR)
+*/
+enum ucc_slow_rx_oversampling_rate {
+	/* 1x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000,
+	/* 8x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000,
+	/* 16x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000,
+	/* 32x clock mode */
+	UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000,
+};
+
+/* UCC Slow Transmitter encoding method (TENC)
+*/
+enum ucc_slow_tx_encoding_method {
+	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000,
+	UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100
+};
+
+/* UCC Slow Receiver decoding method (RENC)
+*/
+enum ucc_slow_rx_decoding_method {
+	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000,
+	UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800
+};
+
+/* UCC Slow Diagnostic mode (DIAG)
+*/
+enum ucc_slow_diag_mode {
+	UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000,
+	UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040,
+	UCC_SLOW_DIAG_MODE_ECHO = 0x00000080,
+	UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0
+};
+
+struct ucc_slow_info {
+	int ucc_num;
+	int protocol;			/* QE_CR_PROTOCOL_xxx */
+	enum qe_clock rx_clock;
+	enum qe_clock tx_clock;
+	phys_addr_t regs;
+	int irq;
+	u16 uccm_mask;
+	int data_mem_part;
+	int init_tx;
+	int init_rx;
+	u32 tx_bd_ring_len;
+	u32 rx_bd_ring_len;
+	int rx_interrupts;
+	int brkpt_support;
+	int grant_support;
+	int tsa;
+	int cdp;
+	int cds;
+	int ctsp;
+	int ctss;
+	int rinv;
+	int tinv;
+	int rtsm;
+	int rfw;
+	int tci;
+	int tend;
+	int tfl;
+	int txsy;
+	u16 max_rx_buf_length;
+	enum ucc_slow_transparent_tcrc tcrc;
+	enum ucc_slow_channel_protocol_mode mode;
+	enum ucc_slow_diag_mode diag;
+	enum ucc_slow_tx_oversampling_rate tdcr;
+	enum ucc_slow_rx_oversampling_rate rdcr;
+	enum ucc_slow_tx_encoding_method tenc;
+	enum ucc_slow_rx_decoding_method renc;
+};
+
+struct ucc_slow_private {
+	struct ucc_slow_info *us_info;
+	struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
+	struct ucc_slow_pram *us_pram;	/* a pointer to the parameter RAM */
+	u32 us_pram_offset;
+	int enabled_tx;		/* Whether channel is enabled for Tx (ENT) */
+	int enabled_rx;		/* Whether channel is enabled for Rx (ENR) */
+	int stopped_tx;		/* Whether channel has been stopped for Tx
+				   (STOP_TX, etc.) */
+	int stopped_rx;		/* Whether channel has been stopped for Rx */
+	struct list_head confQ;	/* frames passed to chip waiting for tx */
+	u32 first_tx_bd_mask;	/* mask is used in Tx routine to save status
+				   and length for first BD in a frame */
+	u32 tx_base_offset;	/* first BD in Tx BD table offset (In MURAM) */
+	u32 rx_base_offset;	/* first BD in Rx BD table offset (In MURAM) */
+	struct qe_bd *confBd;	/* next BD for confirm after Tx */
+	struct qe_bd *tx_bd;	/* next BD for new Tx request */
+	struct qe_bd *rx_bd;	/* next BD to collect after Rx */
+	void *p_rx_frame;	/* accumulating receive frame */
+	u16 *p_ucce;		/* a pointer to the event register in memory.
+				 */
+	u16 *p_uccm;		/* a pointer to the mask register in memory */
+	u16 saved_uccm;		/* a saved mask for the RX Interrupt bits */
+#ifdef STATISTICS
+	u32 tx_frames;		/* Transmitted frames counters */
+	u32 rx_frames;		/* Received frames counters (only frames
+				   passed to application) */
+	u32 rx_discarded;	/* Discarded frames counters (frames that
+				   were discarded by the driver due to
+				   errors) */
+#endif				/* STATISTICS */
+};
+
+/* ucc_slow_init
+ * Initializes Slow UCC according to provided parameters.
+ *
+ * us_info  - (In) pointer to the slow UCC info structure.
+ * uccs_ret - (Out) pointer to the slow UCC structure.
+ */
+int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret);
+
+/* ucc_slow_free
+ * Frees all resources for slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_free(struct ucc_slow_private * uccs);
+
+/* ucc_slow_enable
+ * Enables a fast UCC port.
+ * This routine enables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_disable
+ * Disables a fast UCC port.
+ * This routine disables Tx and/or Rx through the General UCC Mode Register.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ * mode - (In) TX, RX, or both.
+ */
+void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode);
+
+/* ucc_slow_poll_transmitter_now
+ * Immediately forces a poll of the transmitter for data to be sent.
+ * Typically, the hardware performs a periodic poll for data that the
+ * transmit routine has set up to be transmitted. In cases where
+ * this polling cycle is not soon enough, this optional routine can
+ * be invoked to force a poll right away, instead. Proper use for
+ * each transmission for which this functionality is desired is to
+ * call the transmit routine and then this routine right after.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs);
+
+/* ucc_slow_graceful_stop_tx
+ * Smoothly stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_stop_tx
+ * Stops transmission on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
+
+/* ucc_slow_restart_tx
+ * Restarts transmitting on a specified slow UCC.
+ *
+ * uccs - (In) pointer to the slow UCC structure.
+ */
+void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
+
+u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
+
+#endif				/* __UCC_SLOW_H__ */
diff --git a/arch/powerpc/include/asm/ucontext.h b/arch/powerpc/include/asm/ucontext.h
new file mode 100644
index 000000000000..d9a4ddf0cc86
--- /dev/null
+++ b/arch/powerpc/include/asm/ucontext.h
@@ -0,0 +1,40 @@
+#ifndef _ASM_POWERPC_UCONTEXT_H
+#define _ASM_POWERPC_UCONTEXT_H
+
+#ifdef __powerpc64__
+#include <asm/sigcontext.h>
+#else
+#include <asm/elf.h>
+#endif
+#include <asm/signal.h>
+
+#ifndef __powerpc64__
+struct mcontext {
+	elf_gregset_t	mc_gregs;
+	elf_fpregset_t	mc_fregs;
+	unsigned long	mc_pad[2];
+	elf_vrregset_t	mc_vregs __attribute__((__aligned__(16)));
+};
+#endif
+
+struct ucontext {
+	unsigned long	uc_flags;
+	struct ucontext __user *uc_link;
+	stack_t		uc_stack;
+#ifndef __powerpc64__
+	int		uc_pad[7];
+	struct mcontext	__user *uc_regs;/* points to uc_mcontext field */
+#endif
+	sigset_t	uc_sigmask;
+	/* glibc has 1024-bit signal masks, ours are 64-bit */
+#ifdef __powerpc64__
+	sigset_t	__unused[15];	/* Allow for uc_sigmask growth */
+	struct sigcontext uc_mcontext;	/* last for extensibility */
+#else
+	int		uc_maskext[30];
+	int		uc_pad2[3];
+	struct mcontext	uc_mcontext;
+#endif
+};
+
+#endif /* _ASM_POWERPC_UCONTEXT_H */
diff --git a/arch/powerpc/include/asm/udbg.h b/arch/powerpc/include/asm/udbg.h
new file mode 100644
index 000000000000..6418ceea44b7
--- /dev/null
+++ b/arch/powerpc/include/asm/udbg.h
@@ -0,0 +1,55 @@
+/*
+ * (c) 2001, 2006 IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_UDBG_H
+#define _ASM_POWERPC_UDBG_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/init.h>
+
+extern void (*udbg_putc)(char c);
+extern int (*udbg_getc)(void);
+extern int (*udbg_getc_poll)(void);
+
+extern void udbg_puts(const char *s);
+extern int udbg_write(const char *s, int n);
+extern int udbg_read(char *buf, int buflen);
+
+extern void register_early_udbg_console(void);
+extern void udbg_printf(const char *fmt, ...)
+	__attribute__ ((format (printf, 1, 2)));
+extern void udbg_progress(char *s, unsigned short hex);
+
+extern void udbg_init_uart(void __iomem *comport, unsigned int speed,
+			   unsigned int clock);
+extern unsigned int udbg_probe_uart_speed(void __iomem *comport,
+					  unsigned int clock);
+
+struct device_node;
+extern void udbg_scc_init(int force_scc);
+extern int udbg_adb_init(int force_btext);
+extern void udbg_adb_init_early(void);
+
+extern void __init udbg_early_init(void);
+extern void __init udbg_init_debug_lpar(void);
+extern void __init udbg_init_pmac_realmode(void);
+extern void __init udbg_init_maple_realmode(void);
+extern void __init udbg_init_pas_realmode(void);
+extern void __init udbg_init_iseries(void);
+extern void __init udbg_init_rtas_panel(void);
+extern void __init udbg_init_rtas_console(void);
+extern void __init udbg_init_debug_beat(void);
+extern void __init udbg_init_btext(void);
+extern void __init udbg_init_44x_as1(void);
+extern void __init udbg_init_40x_realmode(void);
+extern void __init udbg_init_cpm(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_UDBG_H */
diff --git a/arch/powerpc/include/asm/uic.h b/arch/powerpc/include/asm/uic.h
new file mode 100644
index 000000000000..597edfcae3d6
--- /dev/null
+++ b/arch/powerpc/include/asm/uic.h
@@ -0,0 +1,21 @@
+/*
+ * IBM PPC4xx UIC external definitions and structure.
+ *
+ * Maintainer: David Gibson <dwg@au1.ibm.com>
+ * Copyright 2007 IBM Corporation.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_UIC_H
+#define _ASM_POWERPC_UIC_H
+
+#ifdef __KERNEL__
+
+extern void __init uic_init_tree(void);
+extern unsigned int uic_get_irq(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_UIC_H */
diff --git a/arch/powerpc/include/asm/unaligned.h b/arch/powerpc/include/asm/unaligned.h
new file mode 100644
index 000000000000..5f1b1e3c2137
--- /dev/null
+++ b/arch/powerpc/include/asm/unaligned.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_POWERPC_UNALIGNED_H
+#define _ASM_POWERPC_UNALIGNED_H
+
+#ifdef __KERNEL__
+
+/*
+ * The PowerPC can do unaligned accesses itself in big endian mode.
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_UNALIGNED_H */
diff --git a/arch/powerpc/include/asm/uninorth.h b/arch/powerpc/include/asm/uninorth.h
new file mode 100644
index 000000000000..f737732c3861
--- /dev/null
+++ b/arch/powerpc/include/asm/uninorth.h
@@ -0,0 +1,229 @@
+/*
+ * uninorth.h: definitions for using the "UniNorth" host bridge chip
+ *             from Apple. This chip is used on "Core99" machines
+ *	       This also includes U2 used on more recent MacRISC2/3
+ *             machines and U3 (G5) 
+ *
+ */
+#ifdef __KERNEL__
+#ifndef __ASM_UNINORTH_H__
+#define __ASM_UNINORTH_H__
+
+/*
+ * Uni-N and U3 config space reg. definitions
+ *
+ * (Little endian)
+ */
+
+/* Address ranges selection. This one should work with Bandit too */
+/* Not U3 */
+#define UNI_N_ADDR_SELECT		0x48
+#define UNI_N_ADDR_COARSE_MASK		0xffff0000	/* 256Mb regions at *0000000 */
+#define UNI_N_ADDR_FINE_MASK		0x0000ffff	/*  16Mb regions at f*000000 */
+
+/* AGP registers */
+/* Not U3 */
+#define UNI_N_CFG_GART_BASE		0x8c
+#define UNI_N_CFG_AGP_BASE		0x90
+#define UNI_N_CFG_GART_CTRL		0x94
+#define UNI_N_CFG_INTERNAL_STATUS	0x98
+#define UNI_N_CFG_GART_DUMMY_PAGE	0xa4
+
+/* UNI_N_CFG_GART_CTRL bits definitions */
+#define UNI_N_CFG_GART_INVAL		0x00000001
+#define UNI_N_CFG_GART_ENABLE		0x00000100
+#define UNI_N_CFG_GART_2xRESET		0x00010000
+#define UNI_N_CFG_GART_DISSBADET	0x00020000
+/* The following seems to only be used only on U3 <j.glisse@gmail.com> */
+#define U3_N_CFG_GART_SYNCMODE		0x00040000
+#define U3_N_CFG_GART_PERFRD		0x00080000
+#define U3_N_CFG_GART_B2BGNT		0x00200000
+#define U3_N_CFG_GART_FASTDDR		0x00400000
+
+/* My understanding of UniNorth AGP as of UniNorth rev 1.0x,
+ * revision 1.5 (x4 AGP) may need further changes.
+ *
+ * AGP_BASE register contains the base address of the AGP aperture on
+ * the AGP bus. It doesn't seem to be visible to the CPU as of UniNorth 1.x,
+ * even if decoding of this address range is enabled in the address select
+ * register. Apparently, the only supported bases are 256Mb multiples
+ * (high 4 bits of that register).
+ *
+ * GART_BASE register appear to contain the physical address of the GART
+ * in system memory in the high address bits (page aligned), and the
+ * GART size in the low order bits (number of GART pages)
+ *
+ * The GART format itself is one 32bits word per physical memory page.
+ * This word contains, in little-endian format (!!!), the physical address
+ * of the page in the high bits, and what appears to be an "enable" bit
+ * in the LSB bit (0) that must be set to 1 when the entry is valid.
+ *
+ * Obviously, the GART is not cache coherent and so any change to it
+ * must be flushed to memory (or maybe just make the GART space non
+ * cachable). AGP memory itself doens't seem to be cache coherent neither.
+ *
+ * In order to invalidate the GART (which is probably necessary to inval
+ * the bridge internal TLBs), the following sequence has to be written,
+ * in order, to the GART_CTRL register:
+ *
+ *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
+ *   UNI_N_CFG_GART_ENABLE
+ *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_2xRESET
+ *   UNI_N_CFG_GART_ENABLE
+ *
+ * As far as AGP "features" are concerned, it looks like fast write may
+ * not be supported but this has to be confirmed.
+ *
+ * Turning on AGP seem to require a double invalidate operation, one before
+ * setting the AGP command register, on after.
+ *
+ * Turning off AGP seems to require the following sequence: first wait
+ * for the AGP to be idle by reading the internal status register, then
+ * write in that order to the GART_CTRL register:
+ *
+ *   UNI_N_CFG_GART_ENABLE | UNI_N_CFG_GART_INVAL
+ *   0
+ *   UNI_N_CFG_GART_2xRESET
+ *   0
+ */
+
+/*
+ * Uni-N memory mapped reg. definitions
+ *
+ * Those registers are Big-Endian !!
+ *
+ * Their meaning come from either Darwin and/or from experiments I made with
+ * the bootrom, I'm not sure about their exact meaning yet
+ *
+ */
+
+/* Version of the UniNorth chip */
+#define UNI_N_VERSION			0x0000		/* Known versions: 3,7 and 8 */
+
+#define UNI_N_VERSION_107		0x0003		/* 1.0.7 */
+#define UNI_N_VERSION_10A		0x0007		/* 1.0.10 */
+#define UNI_N_VERSION_150		0x0011		/* 1.5 */
+#define UNI_N_VERSION_200		0x0024		/* 2.0 */
+#define UNI_N_VERSION_PANGEA		0x00C0		/* Integrated U1 + K */
+#define UNI_N_VERSION_INTREPID		0x00D2		/* Integrated U2 + K */
+#define UNI_N_VERSION_300		0x0030		/* 3.0 (U3 on G5) */
+
+/* This register is used to enable/disable various clocks */
+#define UNI_N_CLOCK_CNTL		0x0020
+#define UNI_N_CLOCK_CNTL_PCI		0x00000001	/* PCI2 clock control */
+#define UNI_N_CLOCK_CNTL_GMAC		0x00000002	/* GMAC clock control */
+#define UNI_N_CLOCK_CNTL_FW		0x00000004	/* FireWire clock control */
+#define UNI_N_CLOCK_CNTL_ATA100		0x00000010	/* ATA-100 clock control (U2) */
+
+/* Power Management control */
+#define UNI_N_POWER_MGT			0x0030
+#define UNI_N_POWER_MGT_NORMAL		0x00
+#define UNI_N_POWER_MGT_IDLE2		0x01
+#define UNI_N_POWER_MGT_SLEEP		0x02
+
+/* This register is configured by Darwin depending on the UniN
+ * revision
+ */
+#define UNI_N_ARB_CTRL			0x0040
+#define UNI_N_ARB_CTRL_QACK_DELAY_SHIFT	15
+#define UNI_N_ARB_CTRL_QACK_DELAY_MASK	0x0e1f8000
+#define UNI_N_ARB_CTRL_QACK_DELAY	0x30
+#define UNI_N_ARB_CTRL_QACK_DELAY105	0x00
+
+/* This one _might_ return the CPU number of the CPU reading it;
+ * the bootROM decides whether to boot or to sleep/spinloop depending
+ * on this register beeing 0 or not
+ */
+#define UNI_N_CPU_NUMBER		0x0050
+
+/* This register appear to be read by the bootROM to decide what
+ *  to do on a non-recoverable reset (powerup or wakeup)
+ */
+#define UNI_N_HWINIT_STATE		0x0070
+#define UNI_N_HWINIT_STATE_SLEEPING	0x01
+#define UNI_N_HWINIT_STATE_RUNNING	0x02
+/* This last bit appear to be used by the bootROM to know the second
+ * CPU has started and will enter it's sleep loop with IP=0
+ */
+#define UNI_N_HWINIT_STATE_CPU1_FLAG	0x10000000
+
+/* This register controls AACK delay, which is set when 2004 iBook/PowerBook
+ * is in low speed mode.
+ */
+#define UNI_N_AACK_DELAY		0x0100
+#define UNI_N_AACK_DELAY_ENABLE		0x00000001
+
+/* Clock status for Intrepid */
+#define UNI_N_CLOCK_STOP_STATUS0	0x0150
+#define UNI_N_CLOCK_STOPPED_EXTAGP	0x00200000
+#define UNI_N_CLOCK_STOPPED_AGPDEL	0x00100000
+#define UNI_N_CLOCK_STOPPED_I2S0_45_49	0x00080000
+#define UNI_N_CLOCK_STOPPED_I2S0_18	0x00040000
+#define UNI_N_CLOCK_STOPPED_I2S1_45_49	0x00020000
+#define UNI_N_CLOCK_STOPPED_I2S1_18	0x00010000
+#define UNI_N_CLOCK_STOPPED_TIMER	0x00008000
+#define UNI_N_CLOCK_STOPPED_SCC_RTCLK18	0x00004000
+#define UNI_N_CLOCK_STOPPED_SCC_RTCLK32	0x00002000
+#define UNI_N_CLOCK_STOPPED_SCC_VIA32	0x00001000
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT0	0x00000800
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT1	0x00000400
+#define UNI_N_CLOCK_STOPPED_SCC_SLOT2	0x00000200
+#define UNI_N_CLOCK_STOPPED_PCI_FBCLKO	0x00000100
+#define UNI_N_CLOCK_STOPPED_VEO0	0x00000080
+#define UNI_N_CLOCK_STOPPED_VEO1	0x00000040
+#define UNI_N_CLOCK_STOPPED_USB0	0x00000020
+#define UNI_N_CLOCK_STOPPED_USB1	0x00000010
+#define UNI_N_CLOCK_STOPPED_USB2	0x00000008
+#define UNI_N_CLOCK_STOPPED_32		0x00000004
+#define UNI_N_CLOCK_STOPPED_45		0x00000002
+#define UNI_N_CLOCK_STOPPED_49		0x00000001
+
+#define UNI_N_CLOCK_STOP_STATUS1	0x0160
+#define UNI_N_CLOCK_STOPPED_PLL4REF	0x00080000
+#define UNI_N_CLOCK_STOPPED_CPUDEL	0x00040000
+#define UNI_N_CLOCK_STOPPED_CPU		0x00020000
+#define UNI_N_CLOCK_STOPPED_BUF_REFCKO	0x00010000
+#define UNI_N_CLOCK_STOPPED_PCI2	0x00008000
+#define UNI_N_CLOCK_STOPPED_FW		0x00004000
+#define UNI_N_CLOCK_STOPPED_GB		0x00002000
+#define UNI_N_CLOCK_STOPPED_ATA66	0x00001000
+#define UNI_N_CLOCK_STOPPED_ATA100	0x00000800
+#define UNI_N_CLOCK_STOPPED_MAX		0x00000400
+#define UNI_N_CLOCK_STOPPED_PCI1	0x00000200
+#define UNI_N_CLOCK_STOPPED_KLPCI	0x00000100
+#define UNI_N_CLOCK_STOPPED_USB0PCI	0x00000080
+#define UNI_N_CLOCK_STOPPED_USB1PCI	0x00000040
+#define UNI_N_CLOCK_STOPPED_USB2PCI	0x00000020
+#define UNI_N_CLOCK_STOPPED_7PCI1	0x00000008
+#define UNI_N_CLOCK_STOPPED_AGP		0x00000004
+#define UNI_N_CLOCK_STOPPED_PCI0	0x00000002
+#define UNI_N_CLOCK_STOPPED_18		0x00000001
+
+/* Intrepid registe to OF do-platform-clockspreading */
+#define UNI_N_CLOCK_SPREADING		0x190
+
+/* Uninorth 1.5 rev. has additional perf. monitor registers at 0xf00-0xf50 */
+
+
+/*
+ * U3 specific registers
+ */
+
+
+/* U3 Toggle */
+#define U3_TOGGLE_REG			0x00e0
+#define U3_PMC_START_STOP		0x0001
+#define U3_MPIC_RESET			0x0002
+#define U3_MPIC_OUTPUT_ENABLE		0x0004
+
+/* U3 API PHY Config 1 */
+#define U3_API_PHY_CONFIG_1		0x23030
+
+/* U3 HyperTransport registers */
+#define U3_HT_CONFIG_BASE      		0x70000
+#define U3_HT_LINK_COMMAND		0x100
+#define U3_HT_LINK_CONFIG		0x110
+#define U3_HT_LINK_FREQ			0x120
+
+#endif /* __ASM_UNINORTH_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
new file mode 100644
index 000000000000..e07d0c76ed77
--- /dev/null
+++ b/arch/powerpc/include/asm/unistd.h
@@ -0,0 +1,398 @@
+#ifndef _ASM_POWERPC_UNISTD_H_
+#define _ASM_POWERPC_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_query_module	166
+#define __NR_poll		167
+#define __NR_nfsservctl		168
+#define __NR_setresgid		169
+#define __NR_getresgid		170
+#define __NR_prctl		171
+#define __NR_rt_sigreturn	172
+#define __NR_rt_sigaction	173
+#define __NR_rt_sigprocmask	174
+#define __NR_rt_sigpending	175
+#define __NR_rt_sigtimedwait	176
+#define __NR_rt_sigqueueinfo	177
+#define __NR_rt_sigsuspend	178
+#define __NR_pread64		179
+#define __NR_pwrite64		180
+#define __NR_chown		181
+#define __NR_getcwd		182
+#define __NR_capget		183
+#define __NR_capset		184
+#define __NR_sigaltstack	185
+#define __NR_sendfile		186
+#define __NR_getpmsg		187	/* some people actually want streams */
+#define __NR_putpmsg		188	/* some people actually want streams */
+#define __NR_vfork		189
+#define __NR_ugetrlimit		190	/* SuS compliant getrlimit */
+#define __NR_readahead		191
+#ifndef __powerpc64__			/* these are 32-bit only */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#endif
+#define __NR_pciconfig_read	198
+#define __NR_pciconfig_write	199
+#define __NR_pciconfig_iobase	200
+#define __NR_multiplexer	201
+#define __NR_getdents64		202
+#define __NR_pivot_root		203
+#ifndef __powerpc64__
+#define __NR_fcntl64		204
+#endif
+#define __NR_madvise		205
+#define __NR_mincore		206
+#define __NR_gettid		207
+#define __NR_tkill		208
+#define __NR_setxattr		209
+#define __NR_lsetxattr		210
+#define __NR_fsetxattr		211
+#define __NR_getxattr		212
+#define __NR_lgetxattr		213
+#define __NR_fgetxattr		214
+#define __NR_listxattr		215
+#define __NR_llistxattr		216
+#define __NR_flistxattr		217
+#define __NR_removexattr	218
+#define __NR_lremovexattr	219
+#define __NR_fremovexattr	220
+#define __NR_futex		221
+#define __NR_sched_setaffinity	222
+#define __NR_sched_getaffinity	223
+/* 224 currently unused */
+#define __NR_tuxcall		225
+#ifndef __powerpc64__
+#define __NR_sendfile64		226
+#endif
+#define __NR_io_setup		227
+#define __NR_io_destroy		228
+#define __NR_io_getevents	229
+#define __NR_io_submit		230
+#define __NR_io_cancel		231
+#define __NR_set_tid_address	232
+#define __NR_fadvise64		233
+#define __NR_exit_group		234
+#define __NR_lookup_dcookie	235
+#define __NR_epoll_create	236
+#define __NR_epoll_ctl		237
+#define __NR_epoll_wait		238
+#define __NR_remap_file_pages	239
+#define __NR_timer_create	240
+#define __NR_timer_settime	241
+#define __NR_timer_gettime	242
+#define __NR_timer_getoverrun	243
+#define __NR_timer_delete	244
+#define __NR_clock_settime	245
+#define __NR_clock_gettime	246
+#define __NR_clock_getres	247
+#define __NR_clock_nanosleep	248
+#define __NR_swapcontext	249
+#define __NR_tgkill		250
+#define __NR_utimes		251
+#define __NR_statfs64		252
+#define __NR_fstatfs64		253
+#ifndef __powerpc64__
+#define __NR_fadvise64_64	254
+#endif
+#define __NR_rtas		255
+#define __NR_sys_debug_setcontext 256
+/* Number 257 is reserved for vserver */
+#define __NR_migrate_pages	258
+#define __NR_mbind		259
+#define __NR_get_mempolicy	260
+#define __NR_set_mempolicy	261
+#define __NR_mq_open		262
+#define __NR_mq_unlink		263
+#define __NR_mq_timedsend	264
+#define __NR_mq_timedreceive	265
+#define __NR_mq_notify		266
+#define __NR_mq_getsetattr	267
+#define __NR_kexec_load		268
+#define __NR_add_key		269
+#define __NR_request_key	270
+#define __NR_keyctl		271
+#define __NR_waitid		272
+#define __NR_ioprio_set		273
+#define __NR_ioprio_get		274
+#define __NR_inotify_init	275
+#define __NR_inotify_add_watch	276
+#define __NR_inotify_rm_watch	277
+#define __NR_spu_run		278
+#define __NR_spu_create		279
+#define __NR_pselect6		280
+#define __NR_ppoll		281
+#define __NR_unshare		282
+#define __NR_splice		283
+#define __NR_tee		284
+#define __NR_vmsplice		285
+#define __NR_openat		286
+#define __NR_mkdirat		287
+#define __NR_mknodat		288
+#define __NR_fchownat		289
+#define __NR_futimesat		290
+#ifdef __powerpc64__
+#define __NR_newfstatat		291
+#else
+#define __NR_fstatat64		291
+#endif
+#define __NR_unlinkat		292
+#define __NR_renameat		293
+#define __NR_linkat		294
+#define __NR_symlinkat		295
+#define __NR_readlinkat		296
+#define __NR_fchmodat		297
+#define __NR_faccessat		298
+#define __NR_get_robust_list	299
+#define __NR_set_robust_list	300
+#define __NR_move_pages		301
+#define __NR_getcpu		302
+#define __NR_epoll_pwait	303
+#define __NR_utimensat		304
+#define __NR_signalfd		305
+#define __NR_timerfd_create	306
+#define __NR_eventfd		307
+#define __NR_sync_file_range2	308
+#define __NR_fallocate		309
+#define __NR_subpage_prot	310
+#define __NR_timerfd_settime	311
+#define __NR_timerfd_gettime	312
+#define __NR_signalfd4		313
+#define __NR_eventfd2		314
+#define __NR_epoll_create1	315
+#define __NR_dup3		316
+#define __NR_pipe2		317
+#define __NR_inotify_init1	318
+
+#ifdef __KERNEL__
+
+#define __NR_syscalls		319
+
+#define __NR__exit __NR_exit
+#define NR_syscalls	__NR_syscalls
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#ifdef CONFIG_PPC32
+#define __ARCH_WANT_OLD_STAT
+#endif
+#ifdef CONFIG_PPC64
+#define __ARCH_WANT_COMPAT_SYS_TIME
+#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_SYS_NEWFSTATAT
+#endif
+
+/*
+ * "Conditional" syscalls
+ */
+#define cond_syscall(x) \
+	asmlinkage long x (void) __attribute__((weak,alias("sys_ni_syscall")))
+
+#endif		/* __ASSEMBLY__ */
+#endif		/* __KERNEL__ */
+
+#endif /* _ASM_POWERPC_UNISTD_H_ */
diff --git a/arch/powerpc/include/asm/user.h b/arch/powerpc/include/asm/user.h
new file mode 100644
index 000000000000..3fd4545dd74e
--- /dev/null
+++ b/arch/powerpc/include/asm/user.h
@@ -0,0 +1,51 @@
+#ifndef _ASM_POWERPC_USER_H
+#define _ASM_POWERPC_USER_H
+
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Adapted from <asm-alpha/user.h>
+ *
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd, NOT the osf-core).  The file contents
+ * are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+struct user {
+	struct pt_regs	regs;			/* entire machine state */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	unsigned long	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+#endif	/* _ASM_POWERPC_USER_H */
diff --git a/arch/powerpc/include/asm/vdso.h b/arch/powerpc/include/asm/vdso.h
new file mode 100644
index 000000000000..26fc449bd989
--- /dev/null
+++ b/arch/powerpc/include/asm/vdso.h
@@ -0,0 +1,78 @@
+#ifndef __PPC64_VDSO_H__
+#define __PPC64_VDSO_H__
+
+#ifdef __KERNEL__
+
+/* Default link addresses for the vDSOs */
+#define VDSO32_LBASE	0x100000
+#define VDSO64_LBASE	0x100000
+
+/* Default map addresses */
+#define VDSO32_MBASE	VDSO32_LBASE
+#define VDSO64_MBASE	VDSO64_LBASE
+
+#define VDSO_VERSION_STRING	LINUX_2.6.15
+
+/* Define if 64 bits VDSO has procedure descriptors */
+#undef VDS64_HAS_DESCRIPTORS
+
+#ifndef __ASSEMBLY__
+
+/* Offsets relative to thread->vdso_base */
+extern unsigned long vdso64_rt_sigtramp;
+extern unsigned long vdso32_sigtramp;
+extern unsigned long vdso32_rt_sigtramp;
+
+#else /* __ASSEMBLY__ */
+
+#ifdef __VDSO64__
+#ifdef VDS64_HAS_DESCRIPTORS
+#define V_FUNCTION_BEGIN(name)		\
+	.globl name;			\
+        .section ".opd","a";		\
+        .align 3;			\
+	name:				\
+	.quad .name,.TOC.@tocbase,0;	\
+	.previous;			\
+	.globl .name;			\
+	.type .name,@function; 		\
+	.name:				\
+
+#define V_FUNCTION_END(name)		\
+	.size .name,.-.name;
+
+#define V_LOCAL_FUNC(name) (.name)
+
+#else /* VDS64_HAS_DESCRIPTORS */
+
+#define V_FUNCTION_BEGIN(name)		\
+	.globl name;			\
+	name:				\
+
+#define V_FUNCTION_END(name)		\
+	.size name,.-name;
+
+#define V_LOCAL_FUNC(name) (name)
+
+#endif /* VDS64_HAS_DESCRIPTORS */
+#endif /* __VDSO64__ */
+
+#ifdef __VDSO32__
+
+#define V_FUNCTION_BEGIN(name)		\
+	.globl name;			\
+	.type name,@function; 		\
+	name:				\
+
+#define V_FUNCTION_END(name)		\
+	.size name,.-name;
+
+#define V_LOCAL_FUNC(name) (name)
+
+#endif /* __VDSO32__ */
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* __PPC64_VDSO_H__ */
diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h
new file mode 100644
index 000000000000..f01393224b52
--- /dev/null
+++ b/arch/powerpc/include/asm/vdso_datapage.h
@@ -0,0 +1,121 @@
+#ifndef _VDSO_DATAPAGE_H
+#define _VDSO_DATAPAGE_H
+#ifdef __KERNEL__
+
+/*
+ * Copyright (C) 2002 Peter Bergner <bergner@vnet.ibm.com>, IBM
+ * Copyright (C) 2005 Benjamin Herrenschmidy <benh@kernel.crashing.org>,
+ * 		      IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+/*
+ * Note about this structure:
+ *
+ * This structure was historically called systemcfg and exposed to
+ * userland via /proc/ppc64/systemcfg. Unfortunately, this became an
+ * ABI issue as some proprietary software started relying on being able
+ * to mmap() it, thus we have to keep the base layout at least for a
+ * few kernel versions.
+ *
+ * However, since ppc32 doesn't suffer from this backward handicap,
+ * a simpler version of the data structure is used there with only the
+ * fields actually used by the vDSO.
+ *
+ */
+
+/*
+ * If the major version changes we are incompatible.
+ * Minor version changes are a hint.
+ */
+#define SYSTEMCFG_MAJOR 1
+#define SYSTEMCFG_MINOR 1
+
+#ifndef __ASSEMBLY__
+
+#include <linux/unistd.h>
+
+#define SYSCALL_MAP_SIZE      ((__NR_syscalls + 31) / 32)
+
+/*
+ * So here is the ppc64 backward compatible version
+ */
+
+#ifdef CONFIG_PPC64
+
+struct vdso_data {
+	__u8  eye_catcher[16];		/* Eyecatcher: SYSTEMCFG:PPC64	0x00 */
+	struct {			/* Systemcfg version numbers	     */
+		__u32 major;		/* Major number			0x10 */
+		__u32 minor;		/* Minor number			0x14 */
+	} version;
+
+	/* Note about the platform flags: it now only contains the lpar
+	 * bit. The actual platform number is dead and burried
+	 */
+	__u32 platform;			/* Platform flags		0x18 */
+	__u32 processor;		/* Processor type		0x1C */
+	__u64 processorCount;		/* # of physical processors	0x20 */
+	__u64 physicalMemorySize;	/* Size of real memory(B)	0x28 */
+	__u64 tb_orig_stamp;		/* Timebase at boot		0x30 */
+	__u64 tb_ticks_per_sec;		/* Timebase tics / sec		0x38 */
+	__u64 tb_to_xs;			/* Inverse of TB to 2^20	0x40 */
+	__u64 stamp_xsec;		/*				0x48 */
+	__u64 tb_update_count;		/* Timebase atomicity ctr	0x50 */
+	__u32 tz_minuteswest;		/* Minutes west of Greenwich	0x58 */
+	__u32 tz_dsttime;		/* Type of dst correction	0x5C */
+	__u32 dcache_size;		/* L1 d-cache size		0x60 */
+	__u32 dcache_line_size;		/* L1 d-cache line size		0x64 */
+	__u32 icache_size;		/* L1 i-cache size		0x68 */
+	__u32 icache_line_size;		/* L1 i-cache line size		0x6C */
+
+	/* those additional ones don't have to be located anywhere
+	 * special as they were not part of the original systemcfg
+	 */
+	__u32 dcache_block_size;		/* L1 d-cache block size     */
+	__u32 icache_block_size;		/* L1 i-cache block size     */
+	__u32 dcache_log_block_size;		/* L1 d-cache log block size */
+	__u32 icache_log_block_size;		/* L1 i-cache log block size */
+	__s32 wtom_clock_sec;			/* Wall to monotonic clock */
+	__s32 wtom_clock_nsec;
+   	__u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls  */
+   	__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
+};
+
+#else /* CONFIG_PPC64 */
+
+/*
+ * And here is the simpler 32 bits version
+ */
+struct vdso_data {
+	__u64 tb_orig_stamp;		/* Timebase at boot		0x30 */
+	__u64 tb_ticks_per_sec;		/* Timebase tics / sec		0x38 */
+	__u64 tb_to_xs;			/* Inverse of TB to 2^20	0x40 */
+	__u64 stamp_xsec;		/*				0x48 */
+	__u32 tb_update_count;		/* Timebase atomicity ctr	0x50 */
+	__u32 tz_minuteswest;		/* Minutes west of Greenwich	0x58 */
+	__u32 tz_dsttime;		/* Type of dst correction	0x5C */
+	__s32 wtom_clock_sec;			/* Wall to monotonic clock */
+	__s32 wtom_clock_nsec;
+   	__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
+	__u32 dcache_block_size;	/* L1 d-cache block size     */
+	__u32 icache_block_size;	/* L1 i-cache block size     */
+	__u32 dcache_log_block_size;	/* L1 d-cache log block size */
+	__u32 icache_log_block_size;	/* L1 i-cache log block size */
+};
+
+#endif /* CONFIG_PPC64 */
+
+#ifdef __KERNEL__
+extern struct vdso_data *vdso_data;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#endif /* _SYSTEMCFG_H */
diff --git a/arch/powerpc/include/asm/vga.h b/arch/powerpc/include/asm/vga.h
new file mode 100644
index 000000000000..a2eac409c1ec
--- /dev/null
+++ b/arch/powerpc/include/asm/vga.h
@@ -0,0 +1,53 @@
+#ifndef _ASM_POWERPC_VGA_H_
+#define _ASM_POWERPC_VGA_H_
+
+#ifdef __KERNEL__
+
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+
+#include <asm/io.h>
+
+
+#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE)
+
+#define VT_BUF_HAVE_RW
+/*
+ *  These are only needed for supporting VGA or MDA text mode, which use little
+ *  endian byte ordering.
+ *  In other cases, we can optimize by using native byte ordering and
+ *  <linux/vt_buffer.h> has already done the right job for us.
+ */
+
+static inline void scr_writew(u16 val, volatile u16 *addr)
+{
+    st_le16(addr, val);
+}
+
+static inline u16 scr_readw(volatile const u16 *addr)
+{
+    return ld_le16(addr);
+}
+
+#define VT_BUF_HAVE_MEMCPYW
+#define scr_memcpyw	memcpy
+
+#endif /* !CONFIG_VGA_CONSOLE && !CONFIG_MDA_CONSOLE */
+
+extern unsigned long vgacon_remap_base;
+
+#ifdef __powerpc64__
+#define VGA_MAP_MEM(x,s) ((unsigned long) ioremap((x), s))
+#else
+#define VGA_MAP_MEM(x,s) (x + vgacon_remap_base)
+#endif
+
+#define vga_readb(x) (*(x))
+#define vga_writeb(x,y) (*(y) = (x))
+
+#endif	/* __KERNEL__ */
+#endif	/* _ASM_POWERPC_VGA_H_ */
diff --git a/arch/powerpc/include/asm/vio.h b/arch/powerpc/include/asm/vio.h
new file mode 100644
index 000000000000..0a290a195946
--- /dev/null
+++ b/arch/powerpc/include/asm/vio.h
@@ -0,0 +1,118 @@
+/*
+ * IBM PowerPC Virtual I/O Infrastructure Support.
+ *
+ * Copyright (c) 2003 IBM Corp.
+ *  Dave Engebretsen engebret@us.ibm.com
+ *  Santiago Leon santil@us.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_POWERPC_VIO_H
+#define _ASM_POWERPC_VIO_H
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/mod_devicetable.h>
+
+#include <asm/hvcall.h>
+#include <asm/scatterlist.h>
+
+/*
+ * Architecture-specific constants for drivers to
+ * extract attributes of the device using vio_get_attribute()
+ */
+#define VETH_MAC_ADDR "local-mac-address"
+#define VETH_MCAST_FILTER_SIZE "ibm,mac-address-filters"
+
+/* End architecture-specific constants */
+
+#define h_vio_signal(ua, mode) \
+  plpar_hcall_norets(H_VIO_SIGNAL, ua, mode)
+
+#define VIO_IRQ_DISABLE		0UL
+#define VIO_IRQ_ENABLE		1UL
+
+/*
+ * VIO CMO minimum entitlement for all devices and spare entitlement
+ */
+#define VIO_CMO_MIN_ENT 1562624
+
+struct iommu_table;
+
+/**
+ * vio_dev - This structure is used to describe virtual I/O devices.
+ *
+ * @desired: set from return of driver's get_desired_dma() function
+ * @entitled: bytes of IO data that has been reserved for this device.
+ * @allocated: bytes of IO data currently in use by the device.
+ * @allocs_failed: number of DMA failures due to insufficient entitlement.
+ */
+struct vio_dev {
+	const char *name;
+	const char *type;
+	uint32_t unit_address;
+	unsigned int irq;
+	struct {
+		size_t desired;
+		size_t entitled;
+		size_t allocated;
+		atomic_t allocs_failed;
+	} cmo;
+	struct device dev;
+};
+
+struct vio_driver {
+	const struct vio_device_id *id_table;
+	int (*probe)(struct vio_dev *dev, const struct vio_device_id *id);
+	int (*remove)(struct vio_dev *dev);
+	/* A driver must have a get_desired_dma() function to
+	 * be loaded in a CMO environment if it uses DMA.
+	 */
+	unsigned long (*get_desired_dma)(struct vio_dev *dev);
+	struct device_driver driver;
+};
+
+extern int vio_register_driver(struct vio_driver *drv);
+extern void vio_unregister_driver(struct vio_driver *drv);
+
+extern int vio_cmo_entitlement_update(size_t);
+extern void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired);
+
+extern void __devinit vio_unregister_device(struct vio_dev *dev);
+
+struct device_node;
+
+extern struct vio_dev *vio_register_device_node(
+		struct device_node *node_vdev);
+extern const void *vio_get_attribute(struct vio_dev *vdev, char *which,
+		int *length);
+#ifdef CONFIG_PPC_PSERIES
+extern struct vio_dev *vio_find_node(struct device_node *vnode);
+extern int vio_enable_interrupts(struct vio_dev *dev);
+extern int vio_disable_interrupts(struct vio_dev *dev);
+#else
+static inline int vio_enable_interrupts(struct vio_dev *dev)
+{
+	return 0;
+}
+#endif
+
+static inline struct vio_driver *to_vio_driver(struct device_driver *drv)
+{
+	return container_of(drv, struct vio_driver, driver);
+}
+
+static inline struct vio_dev *to_vio_dev(struct device *dev)
+{
+	return container_of(dev, struct vio_dev, dev);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_VIO_H */
diff --git a/arch/powerpc/include/asm/xilinx_intc.h b/arch/powerpc/include/asm/xilinx_intc.h
new file mode 100644
index 000000000000..343612f8fece
--- /dev/null
+++ b/arch/powerpc/include/asm/xilinx_intc.h
@@ -0,0 +1,20 @@
+/*
+ * Xilinx intc external definitions
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#ifndef _ASM_POWERPC_XILINX_INTC_H
+#define _ASM_POWERPC_XILINX_INTC_H
+
+#ifdef __KERNEL__
+
+extern void __init xilinx_intc_init_tree(void);
+extern unsigned int xilinx_intc_get_irq(void);
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_XILINX_INTC_H */
diff --git a/arch/powerpc/include/asm/xmon.h b/arch/powerpc/include/asm/xmon.h
new file mode 100644
index 000000000000..5eb8e599e5cc
--- /dev/null
+++ b/arch/powerpc/include/asm/xmon.h
@@ -0,0 +1,33 @@
+#ifndef __ASM_POWERPC_XMON_H
+#define __ASM_POWERPC_XMON_H
+
+/*
+ * Copyrignt (C) 2006 IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifdef __KERNEL__
+
+#include <linux/irqreturn.h>
+
+#ifdef CONFIG_XMON
+extern void xmon_setup(void);
+extern void xmon_register_spus(struct list_head *list);
+struct pt_regs;
+extern int xmon(struct pt_regs *excp);
+extern irqreturn_t xmon_irq(int, void *);
+#else
+static inline void xmon_setup(void) { };
+static inline void xmon_register_spus(struct list_head *list) { };
+#endif
+
+#if defined(CONFIG_XMON) && defined(CONFIG_SMP)
+extern int cpus_are_in_xmon(void);
+#endif
+
+#endif /* __KERNEL __ */
+#endif /* __ASM_POWERPC_XMON_H */
diff --git a/arch/powerpc/include/asm/xor.h b/arch/powerpc/include/asm/xor.h
new file mode 100644
index 000000000000..c82eb12a5b18
--- /dev/null
+++ b/arch/powerpc/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index f3f5e2641432..64f5948ebc9d 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -50,16 +50,15 @@ obj-$(CONFIG_IBMVIO)		+= vio.o
 obj-$(CONFIG_IBMEBUS)           += ibmebus.o
 obj-$(CONFIG_GENERIC_TBSYNC)	+= smp-tbsync.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
+obj-$(CONFIG_E500)		+= idle_e500.o
 obj-$(CONFIG_6xx)		+= idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
 obj-$(CONFIG_TAU)		+= tau_6xx.o
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o suspend.o \
 				   swsusp_$(CONFIG_WORD_SIZE).o
 obj64-$(CONFIG_HIBERNATION)	+= swsusp_asm64.o
-obj-$(CONFIG_MODULES)		+= module_$(CONFIG_WORD_SIZE).o
+obj-$(CONFIG_MODULES)		+= module.o module_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_44x)		+= cpu_setup_44x.o
 
-ifeq ($(CONFIG_PPC_MERGE),y)
-
 extra-$(CONFIG_PPC_STD_MMU)	:= head_32.o
 extra-$(CONFIG_PPC64)		:= head_64.o
 extra-$(CONFIG_40x)		:= head_40x.o
@@ -73,6 +72,7 @@ obj-y				+= time.o prom.o traps.o setup-common.o \
 				   misc_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o
 obj-$(CONFIG_PPC64)		+= dma_64.o iommu.o
+obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_PPC_MULTIPLATFORM)	+= prom_init.o
 obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
 obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
@@ -98,12 +98,6 @@ ifneq ($(CONFIG_PPC_INDIRECT_IO),y)
 obj-y				+= iomap.o
 endif
 
-else
-# stuff used from here for ARCH=ppc
-smpobj-$(CONFIG_SMP)		+= smp.o
-
-endif
-
 obj-$(CONFIG_PPC64)		+= $(obj64-y)
 
 extra-$(CONFIG_PPC_FPU)		+= fpu.o
@@ -119,9 +113,6 @@ PHONY += systbl_chk
 systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
 	$(call cmd,systbl_chk)
 
-
-ifeq ($(CONFIG_PPC_MERGE),y)
-
 $(obj)/built-in.o:		prom_init_check
 
 quiet_cmd_prom_init_check = CALL    $<
@@ -131,7 +122,4 @@ PHONY += prom_init_check
 prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
 	$(call cmd,prom_init_check)
 
-endif
-
-
 clean-files := vmlinux.lds
diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c
index e06f75daeba3..367129789cc0 100644
--- a/arch/powerpc/kernel/align.c
+++ b/arch/powerpc/kernel/align.c
@@ -48,6 +48,7 @@ struct aligninfo {
 #define HARD	0x80	/* string, stwcx. */
 #define E4	0x40	/* SPE endianness is word */
 #define E8	0x80	/* SPE endianness is double word */
+#define SPLT	0x80	/* VSX SPLAT load */
 
 /* DSISR bits reported for a DCBZ instruction: */
 #define DCBZ	0x5f	/* 8xx/82xx dcbz faults when cache not enabled */
@@ -363,10 +364,10 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr,
  * Only POWER6 has these instructions, and it does true little-endian,
  * so we don't need the address swizzling.
  */
-static int emulate_fp_pair(struct pt_regs *regs, unsigned char __user *addr,
-			   unsigned int reg, unsigned int flags)
+static int emulate_fp_pair(unsigned char __user *addr, unsigned int reg,
+			   unsigned int flags)
 {
-	char *ptr = (char *) &current->thread.fpr[reg];
+	char *ptr = (char *) &current->thread.TS_FPR(reg);
 	int i, ret;
 
 	if (!(flags & F))
@@ -637,6 +638,36 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg,
 }
 #endif /* CONFIG_SPE */
 
+#ifdef CONFIG_VSX
+/*
+ * Emulate VSX instructions...
+ */
+static int emulate_vsx(unsigned char __user *addr, unsigned int reg,
+		       unsigned int areg, struct pt_regs *regs,
+		       unsigned int flags, unsigned int length)
+{
+	char *ptr = (char *) &current->thread.TS_FPR(reg);
+	int ret;
+
+	flush_vsx_to_thread(current);
+
+	if (flags & ST)
+		ret = __copy_to_user(addr, ptr, length);
+        else {
+		if (flags & SPLT){
+			ret = __copy_from_user(ptr, addr, length);
+			ptr += length;
+		}
+		ret |= __copy_from_user(ptr, addr, length);
+	}
+	if (flags & U)
+		regs->gpr[areg] = regs->dar;
+	if (ret)
+		return -EFAULT;
+	return 1;
+}
+#endif
+
 /*
  * Called on alignment exception. Attempts to fixup
  *
@@ -647,7 +678,7 @@ static int emulate_spe(struct pt_regs *regs, unsigned int reg,
 
 int fix_alignment(struct pt_regs *regs)
 {
-	unsigned int instr, nb, flags;
+	unsigned int instr, nb, flags, instruction = 0;
 	unsigned int reg, areg;
 	unsigned int dsisr;
 	unsigned char __user *addr;
@@ -689,6 +720,7 @@ int fix_alignment(struct pt_regs *regs)
 		if (cpu_has_feature(CPU_FTR_REAL_LE) && (regs->msr & MSR_LE))
 			instr = cpu_to_le32(instr);
 		dsisr = make_dsisr(instr);
+		instruction = instr;
 	}
 
 	/* extract the operation and registers from the dsisr */
@@ -728,6 +760,30 @@ int fix_alignment(struct pt_regs *regs)
 	/* DAR has the operand effective address */
 	addr = (unsigned char __user *)regs->dar;
 
+#ifdef CONFIG_VSX
+	if ((instruction & 0xfc00003e) == 0x7c000018) {
+		/* Additional register addressing bit (64 VSX vs 32 FPR/GPR */
+		reg |= (instruction & 0x1) << 5;
+		/* Simple inline decoder instead of a table */
+		if (instruction & 0x200)
+			nb = 16;
+		else if (instruction & 0x080)
+			nb = 8;
+		else
+			nb = 4;
+		flags = 0;
+		if (instruction & 0x100)
+			flags |= ST;
+		if (instruction & 0x040)
+			flags |= U;
+		/* splat load needs a special decoder */
+		if ((instruction & 0x400) == 0){
+			flags |= SPLT;
+			nb = 8;
+		}
+		return emulate_vsx(addr, reg, areg, regs, flags, nb);
+	}
+#endif
 	/* A size of 0 indicates an instruction we don't support, with
 	 * the exception of DCBZ which is handled as a special case here
 	 */
@@ -759,7 +815,7 @@ int fix_alignment(struct pt_regs *regs)
 
 	/* Special case for 16-byte FP loads and stores */
 	if (nb == 16)
-		return emulate_fp_pair(regs, addr, reg, flags);
+		return emulate_fp_pair(addr, reg, flags);
 
 	/* If we are loading, get the data from user space, else
 	 * get it from register values
@@ -784,7 +840,7 @@ int fix_alignment(struct pt_regs *regs)
 				return -EFAULT;
 		}
 	} else if (flags & F) {
-		data.dd = current->thread.fpr[reg];
+		data.dd = current->thread.TS_FPR(reg);
 		if (flags & S) {
 			/* Single-precision FP store requires conversion... */
 #ifdef CONFIG_PPC_FPU
@@ -862,7 +918,7 @@ int fix_alignment(struct pt_regs *regs)
 		if (unlikely(ret))
 			return -EFAULT;
 	} else if (flags & F)
-		current->thread.fpr[reg] = data.dd;
+		current->thread.TS_FPR(reg) = data.dd;
 	else
 		regs->gpr[reg] = data.ll;
 
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index ec9228d687b0..92768d3006f7 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -52,6 +52,10 @@
 #include <asm/iseries/alpaca.h>
 #endif
 
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+#include "head_booke.h"
+#endif
+
 int main(void)
 {
 	DEFINE(THREAD, offsetof(struct task_struct, thread));
@@ -74,6 +78,10 @@ int main(void)
 	DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr));
 	DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr));
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	DEFINE(THREAD_VSR0, offsetof(struct thread_struct, fpr));
+	DEFINE(THREAD_USED_VSR, offsetof(struct thread_struct, used_vsr));
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_PPC64
 	DEFINE(KSP_VSID, offsetof(struct thread_struct, ksp_vsid));
 #else /* CONFIG_PPC64 */
@@ -242,6 +250,25 @@ int main(void)
 	DEFINE(_SRR1, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)+8);
 #endif /* CONFIG_PPC64 */
 
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+	DEFINE(EXC_LVL_SIZE, STACK_EXC_LVL_FRAME_SIZE);
+	DEFINE(MAS0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0));
+	/* we overload MMUCR for 44x on MAS0 since they are mutually exclusive */
+	DEFINE(MMUCR, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas0));
+	DEFINE(MAS1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas1));
+	DEFINE(MAS2, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas2));
+	DEFINE(MAS3, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas3));
+	DEFINE(MAS6, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas6));
+	DEFINE(MAS7, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, mas7));
+	DEFINE(_SRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, srr0));
+	DEFINE(_SRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, srr1));
+	DEFINE(_CSRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, csrr0));
+	DEFINE(_CSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, csrr1));
+	DEFINE(_DSRR0, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr0));
+	DEFINE(_DSRR1, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, dsrr1));
+	DEFINE(SAVED_KSP_LIMIT, STACK_INT_FRAME_SIZE+offsetof(struct exception_regs, saved_ksp_limit));
+#endif
+
 	DEFINE(CLONE_VM, CLONE_VM);
 	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
 
diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S
index e3623e3e3451..80cac984d85d 100644
--- a/arch/powerpc/kernel/cpu_setup_44x.S
+++ b/arch/powerpc/kernel/cpu_setup_44x.S
@@ -33,17 +33,12 @@ _GLOBAL(__setup_cpu_440grx)
 	mtlr	r4
 	blr
 _GLOBAL(__setup_cpu_460ex)
+_GLOBAL(__setup_cpu_460gt)
 	b	__init_fpu_44x
 _GLOBAL(__setup_cpu_440gx)
 _GLOBAL(__setup_cpu_440spe)
 	b	__fixup_440A_mcheck
 
- /* Temporary fixup for arch/ppc until we kill the whole thing */
-#ifndef CONFIG_PPC_MERGE
-_GLOBAL(__fixup_440A_mcheck)
-	blr
-#endif
-
 /* enable APU between CPU and FPU */
 _GLOBAL(__init_fpu_44x)
 	mfspr	r3,SPRN_CCR0
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index e44d5530f0a6..25c273c761d1 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -23,6 +23,9 @@
 struct cpu_spec* cur_cpu_spec = NULL;
 EXPORT_SYMBOL(cur_cpu_spec);
 
+/* The platform string corresponding to the real PVR */
+const char *powerpc_base_platform;
+
 /* NOTE:
  * Unlike ppc32, ppc64 will only call this once for the boot CPU, it's
  * the responsibility of the appropriate CPU save/restore functions to
@@ -37,6 +40,7 @@ extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_460ex(unsigned long offset, struct cpu_spec* spec);
+extern void __setup_cpu_460gt(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec);
@@ -52,6 +56,8 @@ extern void __setup_cpu_ppc970MP(unsigned long offset, struct cpu_spec* spec);
 extern void __setup_cpu_pa6t(unsigned long offset, struct cpu_spec* spec);
 extern void __restore_cpu_pa6t(void);
 extern void __restore_cpu_ppc970(void);
+extern void __setup_cpu_power7(unsigned long offset, struct cpu_spec* spec);
+extern void __restore_cpu_power7(void);
 #endif /* CONFIG_PPC64 */
 
 /* This table only contains "desktop" CPUs, it need to be filled with embedded
@@ -67,7 +73,12 @@ extern void __restore_cpu_ppc970(void);
 				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
 #define COMMON_USER_POWER6	(COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_05 |\
 				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \
-				 PPC_FEATURE_TRUE_LE)
+				 PPC_FEATURE_TRUE_LE | \
+				 PPC_FEATURE_PSERIES_PERFMON_COMPAT)
+#define COMMON_USER_POWER7	(COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_06 |\
+				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP | \
+				 PPC_FEATURE_TRUE_LE | \
+				 PPC_FEATURE_PSERIES_PERFMON_COMPAT)
 #define COMMON_USER_PA6T	(COMMON_USER_PPC64 | PPC_FEATURE_PA6T |\
 				 PPC_FEATURE_TRUE_LE | \
 				 PPC_FEATURE_HAS_ALTIVEC_COMP)
@@ -347,6 +358,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.machine_check		= machine_check_generic,
+		.oprofile_cpu_type	= "ppc64/compat-power5+",
 		.platform		= "power5+",
 	},
 	{	/* Power6 */
@@ -378,8 +390,41 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.icache_bsize		= 128,
 		.dcache_bsize		= 128,
 		.machine_check		= machine_check_generic,
+		.oprofile_cpu_type	= "ppc64/compat-power6",
 		.platform		= "power6",
 	},
+	{	/* 2.06-compliant processor, i.e. Power7 "architected" mode */
+		.pvr_mask		= 0xffffffff,
+		.pvr_value		= 0x0f000003,
+		.cpu_name		= "POWER7 (architected)",
+		.cpu_features		= CPU_FTRS_POWER7,
+		.cpu_user_features	= COMMON_USER_POWER7,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.machine_check		= machine_check_generic,
+		.oprofile_cpu_type	= "ppc64/compat-power7",
+		.platform		= "power7",
+	},
+	{	/* Power7 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x003f0000,
+		.cpu_name		= "POWER7 (raw)",
+		.cpu_features		= CPU_FTRS_POWER7,
+		.cpu_user_features	= COMMON_USER_POWER7,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 6,
+		.pmc_type		= PPC_PMC_IBM,
+		.cpu_setup		= __setup_cpu_power7,
+		.cpu_restore		= __restore_cpu_power7,
+		.oprofile_cpu_type	= "ppc64/power7",
+		.oprofile_type		= PPC_OPROFILE_POWER4,
+		.oprofile_mmcra_sihv	= POWER6_MMCRA_SIHV,
+		.oprofile_mmcra_sipr	= POWER6_MMCRA_SIPR,
+		.oprofile_mmcra_clear	= POWER6_MMCRA_THRM |
+			POWER6_MMCRA_OTHER,
+		.platform		= "power7",
+	},
 	{	/* Cell Broadband Engine */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00700000,
@@ -1410,6 +1455,16 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_440A,
 		.platform		= "ppc440",
 	},
+	{ /* 440 in Xilinx Virtex-5 FXT */
+		.pvr_mask		= 0xfffffff0,
+		.pvr_value		= 0x7ff21910,
+		.cpu_name		= "440 in Virtex-5 FXT",
+		.cpu_features		= CPU_FTRS_44X,
+		.cpu_user_features	= COMMON_USER_BOOKE,
+		.icache_bsize		= 32,
+		.dcache_bsize		= 32,
+		.platform		= "ppc440",
+	},
 	{ /* 460EX */
 		.pvr_mask		= 0xffff0002,
 		.pvr_value		= 0x13020002,
@@ -1427,9 +1482,10 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pvr_value		= 0x13020000,
 		.cpu_name		= "460GT",
 		.cpu_features		= CPU_FTRS_44X,
-		.cpu_user_features	= COMMON_USER_BOOKE,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
+		.cpu_setup		= __setup_cpu_460gt,
 		.machine_check		= machine_check_440A,
 		.platform		= "ppc440",
 	},
@@ -1491,7 +1547,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x80200000,
 		.cpu_name		= "e500",
-		/* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
 		.cpu_features		= CPU_FTRS_E500,
 		.cpu_user_features	= COMMON_USER_BOOKE |
 			PPC_FEATURE_HAS_SPE_COMP |
@@ -1508,7 +1563,6 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x80210000,
 		.cpu_name		= "e500v2",
-		/* xxx - galak: add CPU_FTR_MAYBE_CAN_DOZE */
 		.cpu_features		= CPU_FTRS_E500_2,
 		.cpu_user_features	= COMMON_USER_BOOKE |
 			PPC_FEATURE_HAS_SPE_COMP |
@@ -1522,6 +1576,20 @@ static struct cpu_spec __initdata cpu_specs[] = {
 		.machine_check		= machine_check_e500,
 		.platform		= "ppc8548",
 	},
+	{	/* e500mc */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x80230000,
+		.cpu_name		= "e500mc",
+		.cpu_features		= CPU_FTRS_E500MC,
+		.cpu_user_features	= COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+		.icache_bsize		= 64,
+		.dcache_bsize		= 64,
+		.num_pmcs		= 4,
+		.oprofile_cpu_type	= "ppc/e500", /* xxx - galak, e500mc? */
+		.oprofile_type		= PPC_OPROFILE_FSL_EMB,
+		.machine_check		= machine_check_e500,
+		.platform		= "ppce500mc",
+	},
 	{	/* default match */
 		.pvr_mask		= 0x00000000,
 		.pvr_value		= 0x00000000,
@@ -1567,9 +1635,34 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr)
 				t->cpu_setup = s->cpu_setup;
 				t->cpu_restore = s->cpu_restore;
 				t->platform = s->platform;
+				/*
+				 * If we have passed through this logic once
+				 * before and have pulled the default case
+				 * because the real PVR was not found inside
+				 * cpu_specs[], then we are possibly running in
+				 * compatibility mode. In that case, let the
+				 * oprofiler know which set of compatibility
+				 * counters to pull from by making sure the
+				 * oprofile_cpu_type string is set to that of
+				 * compatibility mode. If the oprofile_cpu_type
+				 * already has a value, then we are possibly
+				 * overriding a real PVR with a logical one, and,
+				 * in that case, keep the current value for
+				 * oprofile_cpu_type.
+				 */
+				if (t->oprofile_cpu_type == NULL)
+					t->oprofile_cpu_type = s->oprofile_cpu_type;
 			} else
 				*t = *s;
 			*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
+
+			/*
+			 * Set the base platform string once; assumes
+			 * we're called with real pvr first.
+			 */
+			if (*PTRRELOC(&powerpc_base_platform) == NULL)
+				*PTRRELOC(&powerpc_base_platform) = t->platform;
+
 #if defined(CONFIG_PPC64) || defined(CONFIG_BOOKE)
 			/* ppc64 and booke expect identify_cpu to also call
 			 * setup_cpu for that processor. I will consolidate
@@ -1587,38 +1680,3 @@ struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr)
 	BUG();
 	return NULL;
 }
-
-void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end)
-{
-	struct fixup_entry {
-		unsigned long	mask;
-		unsigned long	value;
-		long		start_off;
-		long		end_off;
-	} *fcur, *fend;
-
-	fcur = fixup_start;
-	fend = fixup_end;
-
-	for (; fcur < fend; fcur++) {
-		unsigned int *pstart, *pend, *p;
-
-		if ((value & fcur->mask) == fcur->value)
-			continue;
-
-		/* These PTRRELOCs will disappear once the new scheme for
-		 * modules and vdso is implemented
-		 */
-		pstart = ((unsigned int *)fcur) + (fcur->start_off / 4);
-		pend = ((unsigned int *)fcur) + (fcur->end_off / 4);
-
-		for (p = pstart; p < pend; p++) {
-			*p = 0x60000000u;
-			asm volatile ("dcbst 0, %0" : : "r" (p));
-		}
-		asm volatile ("sync" : : : "memory");
-		for (p = pstart; p < pend; p++)
-			asm volatile ("icbi 0,%0" : : "r" (p));
-		asm volatile ("sync; isync" : : : "memory");
-	}
-}
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index eae401de3f76..0a8439aafdd1 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -48,7 +48,7 @@ int crashing_cpu = -1;
 static cpumask_t cpus_in_crash = CPU_MASK_NONE;
 cpumask_t cpus_in_sr = CPU_MASK_NONE;
 
-#define CRASH_HANDLER_MAX 1
+#define CRASH_HANDLER_MAX 2
 /* NULL terminated list of shutdown handles */
 static crash_shutdown_t crash_shutdown_handles[CRASH_HANDLER_MAX+1];
 static DEFINE_SPINLOCK(crash_handlers_lock);
diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c
index 9ee3c5278db0..e0debcca0bfa 100644
--- a/arch/powerpc/kernel/crash_dump.c
+++ b/arch/powerpc/kernel/crash_dump.c
@@ -14,6 +14,7 @@
 #include <linux/crash_dump.h>
 #include <linux/bootmem.h>
 #include <linux/lmb.h>
+#include <asm/code-patching.h>
 #include <asm/kdump.h>
 #include <asm/prom.h>
 #include <asm/firmware.h>
@@ -33,6 +34,8 @@ void __init reserve_kdump_trampoline(void)
 
 static void __init create_trampoline(unsigned long addr)
 {
+	unsigned int *p = (unsigned int *)addr;
+
 	/* The maximum range of a single instruction branch, is the current
 	 * instruction's address + (32 MB - 4) bytes. For the trampoline we
 	 * need to branch to current address + 32 MB. So we insert a nop at
@@ -41,8 +44,8 @@ static void __init create_trampoline(unsigned long addr)
 	 * branch to "addr" we jump to ("addr" + 32 MB). Although it requires
 	 * two instructions it doesn't require any registers.
 	 */
-	create_instruction(addr, 0x60000000); /* nop */
-	create_branch(addr + 4, addr + PHYSICAL_START, 0);
+	patch_instruction(p, PPC_NOP_INSTR);
+	patch_branch(++p, addr + PHYSICAL_START, 0);
 }
 
 void __init setup_kdump_trampoline(void)
diff --git a/arch/powerpc/kernel/dma_64.c b/arch/powerpc/kernel/dma_64.c
index 3a317cb0636a..ae5708e3a312 100644
--- a/arch/powerpc/kernel/dma_64.c
+++ b/arch/powerpc/kernel/dma_64.c
@@ -15,15 +15,6 @@
  * Generic iommu implementation
  */
 
-static inline unsigned long device_to_mask(struct device *dev)
-{
-	if (dev->dma_mask && *dev->dma_mask)
-		return *dev->dma_mask;
-	/* Assume devices without mask can take 32 bit addresses */
-	return 0xfffffffful;
-}
-
-
 /* Allocates a contiguous real buffer and creates mappings over it.
  * Returns the virtual address of the buffer and sets dma_handle
  * to the dma address (mapping) of the first page.
@@ -50,32 +41,38 @@ static void dma_iommu_free_coherent(struct device *dev, size_t size,
  */
 static dma_addr_t dma_iommu_map_single(struct device *dev, void *vaddr,
 				       size_t size,
-				       enum dma_data_direction direction)
+				       enum dma_data_direction direction,
+				       struct dma_attrs *attrs)
 {
 	return iommu_map_single(dev, dev->archdata.dma_data, vaddr, size,
-			        device_to_mask(dev), direction);
+				device_to_mask(dev), direction, attrs);
 }
 
 
 static void dma_iommu_unmap_single(struct device *dev, dma_addr_t dma_handle,
 				   size_t size,
-				   enum dma_data_direction direction)
+				   enum dma_data_direction direction,
+				   struct dma_attrs *attrs)
 {
-	iommu_unmap_single(dev->archdata.dma_data, dma_handle, size, direction);
+	iommu_unmap_single(dev->archdata.dma_data, dma_handle, size, direction,
+			   attrs);
 }
 
 
 static int dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
-			    int nelems, enum dma_data_direction direction)
+			    int nelems, enum dma_data_direction direction,
+			    struct dma_attrs *attrs)
 {
-	return iommu_map_sg(dev, sglist, nelems,
-			    device_to_mask(dev), direction);
+	return iommu_map_sg(dev, dev->archdata.dma_data, sglist, nelems,
+			    device_to_mask(dev), direction, attrs);
 }
 
 static void dma_iommu_unmap_sg(struct device *dev, struct scatterlist *sglist,
-		int nelems, enum dma_data_direction direction)
+		int nelems, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
-	iommu_unmap_sg(dev->archdata.dma_data, sglist, nelems, direction);
+	iommu_unmap_sg(dev->archdata.dma_data, sglist, nelems, direction,
+		       attrs);
 }
 
 /* We support DMA to/from any memory page via the iommu */
@@ -148,19 +145,22 @@ static void dma_direct_free_coherent(struct device *dev, size_t size,
 
 static dma_addr_t dma_direct_map_single(struct device *dev, void *ptr,
 					size_t size,
-					enum dma_data_direction direction)
+					enum dma_data_direction direction,
+					struct dma_attrs *attrs)
 {
 	return virt_to_abs(ptr) + get_dma_direct_offset(dev);
 }
 
 static void dma_direct_unmap_single(struct device *dev, dma_addr_t dma_addr,
 				    size_t size,
-				    enum dma_data_direction direction)
+				    enum dma_data_direction direction,
+				    struct dma_attrs *attrs)
 {
 }
 
 static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
-			     int nents, enum dma_data_direction direction)
+			     int nents, enum dma_data_direction direction,
+			     struct dma_attrs *attrs)
 {
 	struct scatterlist *sg;
 	int i;
@@ -174,7 +174,8 @@ static int dma_direct_map_sg(struct device *dev, struct scatterlist *sgl,
 }
 
 static void dma_direct_unmap_sg(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction direction)
+				int nents, enum dma_data_direction direction,
+				struct dma_attrs *attrs)
 {
 }
 
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 7231a708af0d..1cbbf7033641 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -45,29 +45,54 @@
 #endif
 
 #ifdef CONFIG_BOOKE
-#include "head_booke.h"
-#define TRANSFER_TO_HANDLER_EXC_LEVEL(exc_level)	\
-	mtspr	exc_level##_SPRG,r8;			\
-	BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);		\
-	lwz	r0,GPR10-INT_FRAME_SIZE(r8);		\
-	stw	r0,GPR10(r11);				\
-	lwz	r0,GPR11-INT_FRAME_SIZE(r8);		\
-	stw	r0,GPR11(r11);				\
-	mfspr	r8,exc_level##_SPRG
-
 	.globl	mcheck_transfer_to_handler
 mcheck_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(MCHECK)
-	b	transfer_to_handler_full
+	mfspr	r0,SPRN_DSRR0
+	stw	r0,_DSRR0(r11)
+	mfspr	r0,SPRN_DSRR1
+	stw	r0,_DSRR1(r11)
+	/* fall through */
 
 	.globl	debug_transfer_to_handler
 debug_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(DEBUG)
-	b	transfer_to_handler_full
+	mfspr	r0,SPRN_CSRR0
+	stw	r0,_CSRR0(r11)
+	mfspr	r0,SPRN_CSRR1
+	stw	r0,_CSRR1(r11)
+	/* fall through */
 
 	.globl	crit_transfer_to_handler
 crit_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(CRIT)
+#ifdef CONFIG_FSL_BOOKE
+	mfspr	r0,SPRN_MAS0
+	stw	r0,MAS0(r11)
+	mfspr	r0,SPRN_MAS1
+	stw	r0,MAS1(r11)
+	mfspr	r0,SPRN_MAS2
+	stw	r0,MAS2(r11)
+	mfspr	r0,SPRN_MAS3
+	stw	r0,MAS3(r11)
+	mfspr	r0,SPRN_MAS6
+	stw	r0,MAS6(r11)
+#ifdef CONFIG_PHYS_64BIT
+	mfspr	r0,SPRN_MAS7
+	stw	r0,MAS7(r11)
+#endif /* CONFIG_PHYS_64BIT */
+#endif /* CONFIG_FSL_BOOKE */
+#ifdef CONFIG_44x
+	mfspr	r0,SPRN_MMUCR
+	stw	r0,MMUCR(r11)
+#endif
+	mfspr	r0,SPRN_SRR0
+	stw	r0,_SRR0(r11)
+	mfspr	r0,SPRN_SRR1
+	stw	r0,_SRR1(r11)
+
+	mfspr	r8,SPRN_SPRG3
+	lwz	r0,KSP_LIMIT(r8)
+	stw	r0,SAVED_KSP_LIMIT(r11)
+	rlwimi	r0,r1,0,0,(31-THREAD_SHIFT)
+	stw	r0,KSP_LIMIT(r8)
 	/* fall through */
 #endif
 
@@ -78,6 +103,16 @@ crit_transfer_to_handler:
 	stw	r0,GPR10(r11)
 	lwz	r0,crit_r11@l(0)
 	stw	r0,GPR11(r11)
+	mfspr	r0,SPRN_SRR0
+	stw	r0,crit_srr0@l(0)
+	mfspr	r0,SPRN_SRR1
+	stw	r0,crit_srr1@l(0)
+
+	mfspr	r8,SPRN_SPRG3
+	lwz	r0,KSP_LIMIT(r8)
+	stw	r0,saved_ksp_limit@l(0)
+	rlwimi	r0,r1,0,0,(31-THREAD_SHIFT)
+	stw	r0,KSP_LIMIT(r8)
 	/* fall through */
 #endif
 
@@ -142,13 +177,14 @@ transfer_to_handler:
 	cmplw	r1,r9			/* if r1 <= ksp_limit */
 	ble-	stack_ovf		/* then the kernel stack overflowed */
 5:
-#ifdef CONFIG_6xx
+#if defined(CONFIG_6xx) || defined(CONFIG_E500)
 	rlwinm	r9,r1,0,0,31-THREAD_SHIFT
 	tophys(r9,r9)			/* check local flags */
 	lwz	r12,TI_LOCAL_FLAGS(r9)
 	mtcrf	0x01,r12
 	bt-	31-TLF_NAPPING,4f
-#endif /* CONFIG_6xx */
+	bt-	31-TLF_SLEEPING,7f
+#endif /* CONFIG_6xx || CONFIG_E500 */
 	.globl transfer_to_handler_cont
 transfer_to_handler_cont:
 3:
@@ -161,10 +197,17 @@ transfer_to_handler_cont:
 	SYNC
 	RFI				/* jump to handler, enable MMU */
 
-#ifdef CONFIG_6xx
+#if defined (CONFIG_6xx) || defined(CONFIG_E500)
 4:	rlwinm	r12,r12,0,~_TLF_NAPPING
 	stw	r12,TI_LOCAL_FLAGS(r9)
-	b	power_save_6xx_restore
+	b	power_save_ppc32_restore
+
+7:	rlwinm	r12,r12,0,~_TLF_SLEEPING
+	stw	r12,TI_LOCAL_FLAGS(r9)
+	lwz	r9,_MSR(r11)		/* if sleeping, clear MSR.EE */
+	rlwinm	r9,r9,0,~MSR_EE
+	lwz	r12,_LINK(r11)		/* and return to address in LR */
+	b	fast_exception_return
 #endif
 
 /*
@@ -300,7 +343,12 @@ syscall_dotrace:
 	stw	r0,_TRAP(r1)
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	do_syscall_trace_enter
-	lwz	r0,GPR0(r1)	/* Restore original registers */
+	/*
+	 * Restore argument registers possibly just changed.
+	 * We use the return value of do_syscall_trace_enter
+	 * for call number to look up in the table (r0).
+	 */
+	mr	r0,r3
 	lwz	r3,GPR3(r1)
 	lwz	r4,GPR4(r1)
 	lwz	r5,GPR5(r1)
@@ -669,7 +717,7 @@ user_exc_return:		/* r10 contains MSR_KERNEL here */
 	/* Check current_thread_info()->flags */
 	rlwinm	r9,r1,0,0,(31-THREAD_SHIFT)
 	lwz	r9,TI_FLAGS(r9)
-	andi.	r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED)
+	andi.	r0,r9,_TIF_USER_WORK_MASK
 	bne	do_work
 
 restore_user:
@@ -860,17 +908,90 @@ exc_exit_restart_end:
 	exc_lvl_rfi;							\
 	b	.;		/* prevent prefetch past exc_lvl_rfi */
 
+#define	RESTORE_xSRR(exc_lvl_srr0, exc_lvl_srr1)			\
+	lwz	r9,_##exc_lvl_srr0(r1);					\
+	lwz	r10,_##exc_lvl_srr1(r1);				\
+	mtspr	SPRN_##exc_lvl_srr0,r9;					\
+	mtspr	SPRN_##exc_lvl_srr1,r10;
+
+#if defined(CONFIG_FSL_BOOKE)
+#ifdef CONFIG_PHYS_64BIT
+#define	RESTORE_MAS7							\
+	lwz	r11,MAS7(r1);						\
+	mtspr	SPRN_MAS7,r11;
+#else
+#define	RESTORE_MAS7
+#endif /* CONFIG_PHYS_64BIT */
+#define RESTORE_MMU_REGS						\
+	lwz	r9,MAS0(r1);						\
+	lwz	r10,MAS1(r1);						\
+	lwz	r11,MAS2(r1);						\
+	mtspr	SPRN_MAS0,r9;						\
+	lwz	r9,MAS3(r1);						\
+	mtspr	SPRN_MAS1,r10;						\
+	lwz	r10,MAS6(r1);						\
+	mtspr	SPRN_MAS2,r11;						\
+	mtspr	SPRN_MAS3,r9;						\
+	mtspr	SPRN_MAS6,r10;						\
+	RESTORE_MAS7;
+#elif defined(CONFIG_44x)
+#define RESTORE_MMU_REGS						\
+	lwz	r9,MMUCR(r1);						\
+	mtspr	SPRN_MMUCR,r9;
+#else
+#define RESTORE_MMU_REGS
+#endif
+
+#ifdef CONFIG_40x
 	.globl	ret_from_crit_exc
 ret_from_crit_exc:
+	mfspr	r9,SPRN_SPRG3
+	lis	r10,saved_ksp_limit@ha;
+	lwz	r10,saved_ksp_limit@l(r10);
+	tovirt(r9,r9);
+	stw	r10,KSP_LIMIT(r9)
+	lis	r9,crit_srr0@ha;
+	lwz	r9,crit_srr0@l(r9);
+	lis	r10,crit_srr1@ha;
+	lwz	r10,crit_srr1@l(r10);
+	mtspr	SPRN_SRR0,r9;
+	mtspr	SPRN_SRR1,r10;
 	RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI)
+#endif /* CONFIG_40x */
 
 #ifdef CONFIG_BOOKE
+	.globl	ret_from_crit_exc
+ret_from_crit_exc:
+	mfspr	r9,SPRN_SPRG3
+	lwz	r10,SAVED_KSP_LIMIT(r1)
+	stw	r10,KSP_LIMIT(r9)
+	RESTORE_xSRR(SRR0,SRR1);
+	RESTORE_MMU_REGS;
+	RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI)
+
 	.globl	ret_from_debug_exc
 ret_from_debug_exc:
+	mfspr	r9,SPRN_SPRG3
+	lwz	r10,SAVED_KSP_LIMIT(r1)
+	stw	r10,KSP_LIMIT(r9)
+	lwz	r9,THREAD_INFO-THREAD(r9)
+	rlwinm	r10,r1,0,0,(31-THREAD_SHIFT)
+	lwz	r10,TI_PREEMPT(r10)
+	stw	r10,TI_PREEMPT(r9)
+	RESTORE_xSRR(SRR0,SRR1);
+	RESTORE_xSRR(CSRR0,CSRR1);
+	RESTORE_MMU_REGS;
 	RET_FROM_EXC_LEVEL(SPRN_DSRR0, SPRN_DSRR1, RFDI)
 
 	.globl	ret_from_mcheck_exc
 ret_from_mcheck_exc:
+	mfspr	r9,SPRN_SPRG3
+	lwz	r10,SAVED_KSP_LIMIT(r1)
+	stw	r10,KSP_LIMIT(r9)
+	RESTORE_xSRR(SRR0,SRR1);
+	RESTORE_xSRR(CSRR0,CSRR1);
+	RESTORE_xSRR(DSRR0,DSRR1);
+	RESTORE_MMU_REGS;
 	RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, RFMCI)
 #endif /* CONFIG_BOOKE */
 
@@ -926,7 +1047,7 @@ recheck:
 	lwz	r9,TI_FLAGS(r9)
 	andi.	r0,r9,_TIF_NEED_RESCHED
 	bne-	do_resched
-	andi.	r0,r9,_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK
+	andi.	r0,r9,_TIF_USER_WORK_MASK
 	beq	restore_user
 do_user_signal:			/* r10 contains MSR_KERNEL here */
 	ori	r10,r10,MSR_EE
@@ -939,8 +1060,8 @@ do_user_signal:			/* r10 contains MSR_KERNEL here */
 	SAVE_NVGPRS(r1)
 	rlwinm	r3,r3,0,0,30
 	stw	r3,_TRAP(r1)
-2:	li	r3,0
-	addi	r4,r1,STACK_FRAME_OVERHEAD
+2:	addi	r3,r1,STACK_FRAME_OVERHEAD
+	mr	r4,r9
 	bl	do_signal
 	REST_NVGPRS(r1)
 	b	recheck
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 2f511a969d2c..2d802e97097c 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -214,7 +214,12 @@ syscall_dotrace:
 	bl	.save_nvgprs
 	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.do_syscall_trace_enter
-	ld	r0,GPR0(r1)	/* Restore original registers */
+	/*
+	 * Restore argument registers possibly just changed.
+	 * We use the return value of do_syscall_trace_enter
+	 * for the call number to look up in the table (r0).
+	 */
+	mr	r0,r3
 	ld	r3,GPR3(r1)
 	ld	r4,GPR4(r1)
 	ld	r5,GPR5(r1)
@@ -354,6 +359,11 @@ _GLOBAL(_switch)
 	mflr	r20		/* Return to switch caller */
 	mfmsr	r22
 	li	r0, MSR_FP
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	oris	r0,r0,MSR_VSX@h	/* Disable VSX */
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_ALTIVEC
 BEGIN_FTR_SECTION
 	oris	r0,r0,MSR_VEC@h	/* Disable altivec */
@@ -384,16 +394,16 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 
 	ld	r8,KSP(r4)	/* new stack pointer */
 BEGIN_FTR_SECTION
-	b	2f
-END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
-BEGIN_FTR_SECTION
+  BEGIN_FTR_SECTION_NESTED(95)
 	clrrdi	r6,r8,28	/* get its ESID */
 	clrrdi	r9,r1,28	/* get current sp ESID */
-END_FTR_SECTION_IFCLR(CPU_FTR_1T_SEGMENT)
-BEGIN_FTR_SECTION
+  FTR_SECTION_ELSE_NESTED(95)
 	clrrdi	r6,r8,40	/* get its 1T ESID */
 	clrrdi	r9,r1,40	/* get current sp 1T ESID */
-END_FTR_SECTION_IFSET(CPU_FTR_1T_SEGMENT)
+  ALT_FTR_SECTION_END_NESTED_IFCLR(CPU_FTR_1T_SEGMENT, 95)
+FTR_SECTION_ELSE
+	b	2f
+ALT_FTR_SECTION_END_IFSET(CPU_FTR_SLB)
 	clrldi.	r0,r6,2		/* is new ESID c00000000? */
 	cmpd	cr1,r6,r9	/* or is new ESID the same as current ESID? */
 	cror	eq,4*cr1+eq,eq
@@ -633,8 +643,7 @@ user_work:
 	b	.ret_from_except_lite
 
 1:	bl	.save_nvgprs
-	li	r3,0
-	addi	r4,r1,STACK_FRAME_OVERHEAD
+	addi	r3,r1,STACK_FRAME_OVERHEAD
 	bl	.do_signal
 	b	.ret_from_except
 
diff --git a/arch/powerpc/kernel/fpu.S b/arch/powerpc/kernel/fpu.S
index 821e152e093c..a088c064ae40 100644
--- a/arch/powerpc/kernel/fpu.S
+++ b/arch/powerpc/kernel/fpu.S
@@ -24,6 +24,29 @@
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
 
+#ifdef CONFIG_VSX
+#define REST_32FPVSRS(n,c,base)						\
+BEGIN_FTR_SECTION							\
+	b	2f;							\
+END_FTR_SECTION_IFSET(CPU_FTR_VSX);					\
+	REST_32FPRS(n,base);						\
+	b	3f;							\
+2:	REST_32VSRS(n,c,base);						\
+3:
+
+#define SAVE_32FPVSRS(n,c,base)						\
+BEGIN_FTR_SECTION							\
+	b	2f;							\
+END_FTR_SECTION_IFSET(CPU_FTR_VSX);					\
+	SAVE_32FPRS(n,base);						\
+	b	3f;							\
+2:	SAVE_32VSRS(n,c,base);						\
+3:
+#else
+#define REST_32FPVSRS(n,b,base)	REST_32FPRS(n, base)
+#define SAVE_32FPVSRS(n,b,base)	SAVE_32FPRS(n, base)
+#endif
+
 /*
  * This task wants to use the FPU now.
  * On UP, disable FP for the task which had the FPU previously,
@@ -34,6 +57,11 @@
 _GLOBAL(load_up_fpu)
 	mfmsr	r5
 	ori	r5,r5,MSR_FP
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	oris	r5,r5,MSR_VSX@h
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
 	SYNC
 	MTMSRD(r5)			/* enable use of fpu now */
 	isync
@@ -50,7 +78,7 @@ _GLOBAL(load_up_fpu)
 	beq	1f
 	toreal(r4)
 	addi	r4,r4,THREAD		/* want last_task_used_math->thread */
-	SAVE_32FPRS(0, r4)
+	SAVE_32FPVSRS(0, r5, r4)
 	mffs	fr0
 	stfd	fr0,THREAD_FPSCR(r4)
 	PPC_LL	r5,PT_REGS(r4)
@@ -77,7 +105,7 @@ _GLOBAL(load_up_fpu)
 #endif
 	lfd	fr0,THREAD_FPSCR(r5)
 	MTFSF_L(fr0)
-	REST_32FPRS(0, r5)
+	REST_32FPVSRS(0, r4, r5)
 #ifndef CONFIG_SMP
 	subi	r4,r5,THREAD
 	fromreal(r4)
@@ -85,7 +113,7 @@ _GLOBAL(load_up_fpu)
 #endif /* CONFIG_SMP */
 	/* restore registers and return */
 	/* we haven't used ctr or xer or lr */
-	b	fast_exception_return
+	blr
 
 /*
  * giveup_fpu(tsk)
@@ -96,6 +124,11 @@ _GLOBAL(load_up_fpu)
 _GLOBAL(giveup_fpu)
 	mfmsr	r5
 	ori	r5,r5,MSR_FP
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	oris	r5,r5,MSR_VSX@h
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
 	SYNC_601
 	ISYNC_601
 	MTMSRD(r5)			/* enable use of fpu now */
@@ -106,7 +139,7 @@ _GLOBAL(giveup_fpu)
 	addi	r3,r3,THREAD	        /* want THREAD of task */
 	PPC_LL	r5,PT_REGS(r3)
 	PPC_LCMPI	0,r5,0
-	SAVE_32FPRS(0, r3)
+	SAVE_32FPVSRS(0, r4 ,r3)
 	mffs	fr0
 	stfd	fr0,THREAD_FPSCR(r3)
 	beq	1f
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 785af9b56591..99ee2f0f0f2b 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -421,8 +421,10 @@ BEGIN_FTR_SECTION
 	b 	ProgramCheck
 END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE)
 	EXCEPTION_PROLOG
-	bne	load_up_fpu		/* if from user, just load it up */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
+	beq	1f
+	bl	load_up_fpu		/* if from user, just load it up */
+	b	fast_exception_return
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
 
 /* Decrementer */
diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S
index 8552e67e3a8b..56d8e5d90c5b 100644
--- a/arch/powerpc/kernel/head_40x.S
+++ b/arch/powerpc/kernel/head_40x.S
@@ -93,6 +93,12 @@ _ENTRY(crit_r10)
 	.space	4
 _ENTRY(crit_r11)
 	.space	4
+_ENTRY(crit_srr0)
+	.space	4
+_ENTRY(crit_srr1)
+	.space	4
+_ENTRY(saved_ksp_limit)
+	.space	4
 
 /*
  * Exception vector entry code. This code runs with address translation
@@ -148,14 +154,14 @@ _ENTRY(crit_r11)
 	mfcr	r10;			/* save CR in r10 for now	   */\
 	mfspr	r11,SPRN_SRR3;		/* check whether user or kernel    */\
 	andi.	r11,r11,MSR_PR;						     \
-	lis	r11,critical_stack_top@h;				     \
-	ori	r11,r11,critical_stack_top@l;				     \
+	lis	r11,critirq_ctx@ha;					     \
+	tophys(r11,r11);						     \
+	lwz	r11,critirq_ctx@l(r11);					     \
 	beq	1f;							     \
 	/* COMING FROM USER MODE */					     \
 	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
 	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
-	addi	r11,r11,THREAD_SIZE;					     \
-1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
+1:	addi	r11,r11,THREAD_SIZE-INT_FRAME_SIZE; /* Alloc an excpt frm  */\
 	tophys(r11,r11);						     \
 	stw	r10,_CCR(r11);          /* save various registers	   */\
 	stw	r12,GPR12(r11);						     \
@@ -996,16 +1002,6 @@ empty_zero_page:
 swapper_pg_dir:
 	.space	PGD_TABLE_SIZE
 
-
-/* Stack for handling critical exceptions from kernel mode */
-	.section .bss
-        .align 12
-exception_stack_bottom:
-	.space	4096
-critical_stack_top:
-	.globl	exception_stack_top
-exception_stack_top:
-
 /* Room for two PTE pointers, usually the kernel and current user pointers
  * to their respective root page table.
  */
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index 22b5d2c459a3..f3a1ea9d7fe4 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -293,119 +293,9 @@ interrupt_base:
 	MCHECK_EXCEPTION(0x0210, MachineCheckA, machine_check_exception)
 
 	/* Data Storage Interrupt */
-	START_EXCEPTION(DataStorage)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-
-	/*
-	 * Check if it was a store fault, if not then bail
-	 * because a user tried to access a kernel or
-	 * read-protected page.  Otherwise, get the
-	 * offending address and handle it.
-	 */
-	mfspr	r10, SPRN_ESR
-	andis.	r10, r10, ESR_ST@h
-	beq	2f
-
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, PAGE_OFFSET@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-
-	mfspr   r12,SPRN_MMUCR
-	rlwinm	r12,r12,0,0,23		/* Clear TID */
-
-	b	4f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-
-	/* Load PID into MMUCR TID */
-	mfspr	r12,SPRN_MMUCR		/* Get MMUCR */
-	mfspr   r13,SPRN_PID		/* Get PID */
-	rlwimi	r12,r13,0,24,31		/* Set TID */
-
-4:
-	mtspr   SPRN_MMUCR,r12
-
-	rlwinm  r12, r10, 13, 19, 29    /* Compute pgdir/pmd offset */
-	lwzx    r11, r12, r11           /* Get pgd/pmd entry */
-	rlwinm. r12, r11, 0, 0, 20      /* Extract pt base address */
-	beq     2f                      /* Bail if no table */
-
-	rlwimi  r12, r10, 23, 20, 28    /* Compute pte address */
-	lwz     r11, 4(r12)             /* Get pte entry */
-
-	andi.	r13, r11, _PAGE_RW	/* Is it writeable? */
-	beq	2f			/* Bail if not */
-
-	/* Update 'changed'.
-	*/
-	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-	stw	r11, 4(r12)		/* Update Linux page table */
-
-	li	r13, PPC44x_TLB_SR@l	/* Set SR */
-	rlwimi	r13, r11, 29, 29, 29	/* SX = _PAGE_HWEXEC */
-	rlwimi	r13, r11, 0, 30, 30	/* SW = _PAGE_RW */
-	rlwimi	r13, r11, 29, 28, 28	/* UR = _PAGE_USER */
-	rlwimi	r12, r11, 31, 26, 26	/* (_PAGE_USER>>1)->r12 */
-	rlwimi	r12, r11, 29, 30, 30	/* (_PAGE_USER>>3)->r12 */
-	and	r12, r12, r11		/* HWEXEC/RW & USER */
-	rlwimi	r13, r12, 0, 26, 26	/* UX = HWEXEC & USER */
-	rlwimi	r13, r12, 3, 27, 27	/* UW = RW & USER */
-
-	rlwimi	r11,r13,0,26,31		/* Insert static perms */
-
-	/*
-	 * Clear U0-U3 and WL1 IL1I IL1D IL2I IL2D bits which are added
-	 * on newer 440 cores like the 440x6 used on AMCC 460EX/460GT (see
-	 * include/asm-powerpc/pgtable-ppc32.h for details).
-	 */
-	rlwinm	r11,r11,0,20,10
-
-	/* find the TLB index that caused the fault.  It has to be here. */
-	tlbsx	r10, 0, r10
-
-	tlbwe	r11, r10, PPC44x_TLB_ATTRIB	/* Write ATTRIB */
-
-	/* Done...restore registers and get out of here.
-	*/
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
+	DATA_STORAGE_EXCEPTION
 
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	rfi			/* Force context change */
-
-2:
-	/*
-	 * The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	data_access
-
-	/* Instruction Storage Interrupt */
+		/* Instruction Storage Interrupt */
 	INSTRUCTION_STORAGE_EXCEPTION
 
 	/* External Input Interrupt */
@@ -423,7 +313,6 @@ interrupt_base:
 #else
 	EXCEPTION(0x2010, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE)
 #endif
-
 	/* System Call Interrupt */
 	START_EXCEPTION(SystemCall)
 	NORMAL_EXCEPTION_PROLOG
@@ -484,18 +373,57 @@ interrupt_base:
 4:
 	mtspr	SPRN_MMUCR,r12
 
+	/* Mask of required permission bits. Note that while we
+	 * do copy ESR:ST to _PAGE_RW position as trying to write
+	 * to an RO page is pretty common, we don't do it with
+	 * _PAGE_DIRTY. We could do it, but it's a fairly rare
+	 * event so I'd rather take the overhead when it happens
+	 * rather than adding an instruction here. We should measure
+	 * whether the whole thing is worth it in the first place
+	 * as we could avoid loading SPRN_ESR completely in the first
+	 * place...
+	 *
+	 * TODO: Is it worth doing that mfspr & rlwimi in the first
+	 *       place or can we save a couple of instructions here ?
+	 */
+	mfspr	r12,SPRN_ESR
+	li	r13,_PAGE_PRESENT|_PAGE_ACCESSED
+	rlwimi	r13,r12,10,30,30
+
+	/* Load the PTE */
 	rlwinm 	r12, r10, 13, 19, 29	/* Compute pgdir/pmd offset */
 	lwzx	r11, r12, r11		/* Get pgd/pmd entry */
 	rlwinm.	r12, r11, 0, 0, 20	/* Extract pt base address */
 	beq	2f			/* Bail if no table */
 
 	rlwimi	r12, r10, 23, 20, 28	/* Compute pte address */
-	lwz	r11, 4(r12)		/* Get pte entry */
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
+	lwz	r11, 0(r12)		/* Get high word of pte entry */
+	lwz	r12, 4(r12)		/* Get low word of pte entry */
 
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 4(r12)
+	lis	r10,tlb_44x_index@ha
+
+	andc.	r13,r13,r12		/* Check permission */
+
+	/* Load the next available TLB index */
+	lwz	r13,tlb_44x_index@l(r10)
+
+	bne	2f			/* Bail if permission mismach */
+
+	/* Increment, rollover, and store TLB index */
+	addi	r13,r13,1
+
+	/* Compare with watermark (instruction gets patched) */
+	.globl tlb_44x_patch_hwater_D
+tlb_44x_patch_hwater_D:
+	cmpwi	0,r13,1			/* reserve entries */
+	ble	5f
+	li	r13,0
+5:
+	/* Store the next available TLB index */
+	stw	r13,tlb_44x_index@l(r10)
+
+	/* Re-load the faulting address */
+	mfspr	r10,SPRN_DEAR
 
 	 /* Jump to common tlb load */
 	b	finish_tlb_load
@@ -510,7 +438,7 @@ interrupt_base:
 	mfspr	r12, SPRN_SPRG4R
 	mfspr	r11, SPRN_SPRG1
 	mfspr	r10, SPRN_SPRG0
-	b	data_access
+	b	DataStorage
 
 	/* Instruction TLB Error Interrupt */
 	/*
@@ -554,18 +482,42 @@ interrupt_base:
 4:
 	mtspr	SPRN_MMUCR,r12
 
+	/* Make up the required permissions */
+	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC
+
 	rlwinm	r12, r10, 13, 19, 29	/* Compute pgdir/pmd offset */
 	lwzx	r11, r12, r11		/* Get pgd/pmd entry */
 	rlwinm.	r12, r11, 0, 0, 20	/* Extract pt base address */
 	beq	2f			/* Bail if no table */
 
 	rlwimi	r12, r10, 23, 20, 28	/* Compute pte address */
-	lwz	r11, 4(r12)		/* Get pte entry */
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
+	lwz	r11, 0(r12)		/* Get high word of pte entry */
+	lwz	r12, 4(r12)		/* Get low word of pte entry */
 
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 4(r12)
+	lis	r10,tlb_44x_index@ha
+
+	andc.	r13,r13,r12		/* Check permission */
+
+	/* Load the next available TLB index */
+	lwz	r13,tlb_44x_index@l(r10)
+
+	bne	2f			/* Bail if permission mismach */
+
+	/* Increment, rollover, and store TLB index */
+	addi	r13,r13,1
+
+	/* Compare with watermark (instruction gets patched) */
+	.globl tlb_44x_patch_hwater_I
+tlb_44x_patch_hwater_I:
+	cmpwi	0,r13,1			/* reserve entries */
+	ble	5f
+	li	r13,0
+5:
+	/* Store the next available TLB index */
+	stw	r13,tlb_44x_index@l(r10)
+
+	/* Re-load the faulting address */
+	mfspr	r10,SPRN_SRR0
 
 	/* Jump to common TLB load point */
 	b	finish_tlb_load
@@ -587,86 +539,40 @@ interrupt_base:
 
 /*
  * Local functions
- */
-	/*
-	 * Data TLB exceptions will bail out to this point
-	 * if they can't resolve the lightweight TLB fault.
-	 */
-data_access:
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
-	stw	r5,_ESR(r11)
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
-	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
+  */
 
 /*
 
  * Both the instruction and data TLB miss get to this
  * point to load the TLB.
  * 	r10 - EA of fault
- * 	r11 - available to use
- *	r12 - Pointer to the 64-bit PTE
- *	r13 - available to use
+ * 	r11 - PTE high word value
+ *	r12 - PTE low word value
+ *	r13 - TLB index
  *	MMUCR - loaded with proper value when we get here
  *	Upon exit, we reload everything and RFI.
  */
 finish_tlb_load:
-	/*
-	 * We set execute, because we don't have the granularity to
-	 * properly set this at the page level (Linux problem).
-	 * If shared is set, we cause a zero PID->TID load.
-	 * Many of these bits are software only.  Bits we don't set
-	 * here we (properly should) assume have the appropriate value.
-	 */
-
-	/* Load the next available TLB index */
-	lis	r13, tlb_44x_index@ha
-	lwz	r13, tlb_44x_index@l(r13)
-	/* Load the TLB high watermark */
-	lis	r11, tlb_44x_hwater@ha
-	lwz	r11, tlb_44x_hwater@l(r11)
-
-	/* Increment, rollover, and store TLB index */
-	addi	r13, r13, 1
-	cmpw	0, r13, r11			/* reserve entries */
-	ble	7f
-	li	r13, 0
-7:
-	/* Store the next available TLB index */
-	lis	r11, tlb_44x_index@ha
-	stw	r13, tlb_44x_index@l(r11)
-
-	lwz	r11, 0(r12)			/* Get MS word of PTE */
-	lwz	r12, 4(r12)			/* Get LS word of PTE */
-	rlwimi	r11, r12, 0, 0 , 19		/* Insert RPN */
-	tlbwe	r11, r13, PPC44x_TLB_XLAT	/* Write XLAT */
+	/* Combine RPN & ERPN an write WS 0 */
+	rlwimi	r11,r12,0,0,19
+	tlbwe	r11,r13,PPC44x_TLB_XLAT
 
 	/*
-	 * Create PAGEID. This is the faulting address,
+	 * Create WS1. This is the faulting address (EPN),
 	 * page size, and valid flag.
 	 */
-	li	r11, PPC44x_TLB_VALID | PPC44x_TLB_4K
-	rlwimi	r10, r11, 0, 20, 31		/* Insert valid and page size */
-	tlbwe	r10, r13, PPC44x_TLB_PAGEID	/* Write PAGEID */
-
-	li	r10, PPC44x_TLB_SR@l		/* Set SR */
-	rlwimi	r10, r12, 0, 30, 30		/* Set SW = _PAGE_RW */
-	rlwimi	r10, r12, 29, 29, 29		/* SX = _PAGE_HWEXEC */
-	rlwimi	r10, r12, 29, 28, 28		/* UR = _PAGE_USER */
-	rlwimi	r11, r12, 31, 26, 26		/* (_PAGE_USER>>1)->r12 */
-	and	r11, r12, r11			/* HWEXEC & USER */
-	rlwimi	r10, r11, 0, 26, 26		/* UX = HWEXEC & USER */
-
-	rlwimi	r12, r10, 0, 26, 31		/* Insert static perms */
-
-	/*
-	 * Clear U0-U3 and WL1 IL1I IL1D IL2I IL2D bits which are added
-	 * on newer 440 cores like the 440x6 used on AMCC 460EX/460GT (see
-	 * include/asm-powerpc/pgtable-ppc32.h for details).
-	 */
-	rlwinm	r12, r12, 0, 20, 10
-
-	tlbwe	r12, r13, PPC44x_TLB_ATTRIB	/* Write ATTRIB */
+	li	r11,PPC44x_TLB_VALID | PPC44x_TLB_4K
+	rlwimi	r10,r11,0,20,31			/* Insert valid and page size*/
+	tlbwe	r10,r13,PPC44x_TLB_PAGEID	/* Write PAGEID */
+
+	/* And WS 2 */
+	li	r10,0xf85			/* Mask to apply from PTE */
+	rlwimi	r10,r12,29,30,30		/* DIRTY -> SW position */
+	and	r11,r12,r10			/* Mask PTE bits to keep */
+	andi.	r10,r12,_PAGE_USER		/* User page ? */
+	beq	1f				/* nope, leave U bits empty */
+	rlwimi	r11,r11,3,26,28			/* yes, copy S bits to U */
+1:	tlbwe	r11,r13,PPC44x_TLB_ATTRIB	/* Write ATTRIB */
 
 	/* Done...restore registers and get out of here.
 	*/
@@ -742,15 +648,6 @@ empty_zero_page:
 swapper_pg_dir:
 	.space	PGD_TABLE_SIZE
 
-/* Reserved 4k for the critical exception stack & 4k for the machine
- * check stack per CPU for kernel mode exceptions */
-	.section .bss
-        .align 12
-exception_stack_bottom:
-	.space	BOOKE_EXCEPTION_STACK_SIZE
-	.globl	exception_stack_top
-exception_stack_top:
-
 /*
  * Room for two PTE pointers, usually the kernel and current user pointers
  * to their respective root page table.
diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S
index 25e84c0e1166..cc8fb474d520 100644
--- a/arch/powerpc/kernel/head_64.S
+++ b/arch/powerpc/kernel/head_64.S
@@ -275,7 +275,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 	. = 0xf00
 	b	performance_monitor_pSeries
 
-	STD_EXCEPTION_PSERIES(0xf20, altivec_unavailable)
+	. = 0xf20
+	b	altivec_unavailable_pSeries
+
+	. = 0xf40
+	b	vsx_unavailable_pSeries
 
 #ifdef CONFIG_CBE_RAS
 	HSTD_EXCEPTION_PSERIES(0x1200, cbe_system_error)
@@ -295,6 +299,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
 
 	/* moved from 0xf00 */
 	STD_EXCEPTION_PSERIES(., performance_monitor)
+	STD_EXCEPTION_PSERIES(., altivec_unavailable)
+	STD_EXCEPTION_PSERIES(., vsx_unavailable)
 
 /*
  * An interrupt came in while soft-disabled; clear EE in SRR1,
@@ -739,7 +745,8 @@ fp_unavailable_common:
 	ENABLE_INTS
 	bl	.kernel_fp_unavailable_exception
 	BUG_OPCODE
-1:	b	.load_up_fpu
+1:	bl	.load_up_fpu
+	b	fast_exception_return
 
 	.align	7
 	.globl altivec_unavailable_common
@@ -747,7 +754,10 @@ altivec_unavailable_common:
 	EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN)
 #ifdef CONFIG_ALTIVEC
 BEGIN_FTR_SECTION
-	bne	.load_up_altivec	/* if from user, just load it up */
+	beq	1f
+	bl	.load_up_altivec
+	b	fast_exception_return
+1:
 END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
 #endif
 	bl	.save_nvgprs
@@ -827,9 +837,70 @@ _STATIC(load_up_altivec)
 	std	r4,0(r3)
 #endif /* CONFIG_SMP */
 	/* restore registers and return */
-	b	fast_exception_return
+	blr
 #endif /* CONFIG_ALTIVEC */
 
+	.align	7
+	.globl vsx_unavailable_common
+vsx_unavailable_common:
+	EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN)
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+	bne	.load_up_vsx
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
+	bl	.save_nvgprs
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	ENABLE_INTS
+	bl	.vsx_unavailable_exception
+	b	.ret_from_except
+
+#ifdef CONFIG_VSX
+/*
+ * load_up_vsx(unused, unused, tsk)
+ * Disable VSX for the task which had it previously,
+ * and save its vector registers in its thread_struct.
+ * Reuse the fp and vsx saves, but first check to see if they have
+ * been saved already.
+ * On entry: r13 == 'current' && last_task_used_vsx != 'current'
+ */
+_STATIC(load_up_vsx)
+/* Load FP and VSX registers if they haven't been done yet */
+	andi.	r5,r12,MSR_FP
+	beql+	load_up_fpu		/* skip if already loaded */
+	andis.	r5,r12,MSR_VEC@h
+	beql+	load_up_altivec		/* skip if already loaded */
+
+#ifndef CONFIG_SMP
+	ld	r3,last_task_used_vsx@got(r2)
+	ld	r4,0(r3)
+	cmpdi	0,r4,0
+	beq	1f
+	/* Disable VSX for last_task_used_vsx */
+	addi	r4,r4,THREAD
+	ld	r5,PT_REGS(r4)
+	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r6,MSR_VSX@h
+	andc	r6,r4,r6
+	std	r6,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#endif /* CONFIG_SMP */
+	ld	r4,PACACURRENT(r13)
+	addi	r4,r4,THREAD		/* Get THREAD */
+	li	r6,1
+	stw	r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */
+	/* enable use of VSX after return */
+	oris	r12,r12,MSR_VSX@h
+	std	r12,_MSR(r1)
+#ifndef CONFIG_SMP
+	/* Update last_task_used_math to 'current' */
+	ld	r4,PACACURRENT(r13)
+	std	r4,0(r3)
+#endif /* CONFIG_SMP */
+	b	fast_exception_return
+#endif /* CONFIG_VSX */
+
 /*
  * Hash table stuff
  */
@@ -1127,7 +1198,6 @@ _GLOBAL(generic_secondary_smp_init)
 3:	HMT_LOW
 	lbz	r23,PACAPROCSTART(r13)	/* Test if this processor should */
 					/* start.			 */
-	sync
 
 #ifndef CONFIG_SMP
 	b	3b			/* Never go on non-SMP		 */
@@ -1135,6 +1205,8 @@ _GLOBAL(generic_secondary_smp_init)
 	cmpwi	0,r23,0
 	beq	3b			/* Loop until told to go	 */
 
+	sync				/* order paca.run and cur_cpu_spec */
+
 	/* See if we need to call a cpu state restore handler */
 	LOAD_REG_IMMEDIATE(r23, cur_cpu_spec)
 	ld	r23,0(r23)
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index aefafc6330c9..fce2df988504 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -43,9 +43,7 @@
 	SAVE_2GPRS(7, r11)
 
 /* To handle the additional exception priority levels on 40x and Book-E
- * processors we allocate a 4k stack per additional priority level. The various
- * head_xxx.S files allocate space (exception_stack_top) for each priority's
- * stack times the number of CPUs
+ * processors we allocate a stack per additional priority level.
  *
  * On 40x critical is the only additional level
  * On 44x/e500 we have critical and machine check
@@ -61,36 +59,37 @@
  * going to critical or their own debug level we aren't currently
  * providing configurations that micro-optimize space usage.
  */
-#ifdef CONFIG_44x
-#define NUM_EXCEPTION_LVLS	2
-#else
-#define NUM_EXCEPTION_LVLS	3
-#endif
-#define BOOKE_EXCEPTION_STACK_SIZE	(4096 * NUM_EXCEPTION_LVLS)
 
 /* CRIT_SPRG only used in critical exception handling */
 #define CRIT_SPRG	SPRN_SPRG2
 /* MCHECK_SPRG only used in machine check exception handling */
 #define MCHECK_SPRG	SPRN_SPRG6W
 
-#define MCHECK_STACK_TOP	(exception_stack_top - 4096)
-#define CRIT_STACK_TOP		(exception_stack_top)
+#define MCHECK_STACK_BASE	mcheckirq_ctx
+#define CRIT_STACK_BASE		critirq_ctx
 
-/* only on e200 for now */
-#define DEBUG_STACK_TOP		(exception_stack_top - 8192)
+/* only on e500mc/e200 */
+#define DEBUG_STACK_BASE	dbgirq_ctx
+#ifdef CONFIG_PPC_E500MC
+#define DEBUG_SPRG		SPRN_SPRG9
+#else
 #define DEBUG_SPRG		SPRN_SPRG6W
+#endif
+
+#define EXC_LVL_FRAME_OVERHEAD	(THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE)
 
 #ifdef CONFIG_SMP
 #define BOOKE_LOAD_EXC_LEVEL_STACK(level)		\
 	mfspr	r8,SPRN_PIR;				\
-	mulli	r8,r8,BOOKE_EXCEPTION_STACK_SIZE;	\
-	neg	r8,r8;					\
-	addis	r8,r8,level##_STACK_TOP@ha;		\
-	addi	r8,r8,level##_STACK_TOP@l
+	slwi	r8,r8,2;				\
+	addis	r8,r8,level##_STACK_BASE@ha;		\
+	lwz	r8,level##_STACK_BASE@l(r8);		\
+	addi	r8,r8,EXC_LVL_FRAME_OVERHEAD;
 #else
 #define BOOKE_LOAD_EXC_LEVEL_STACK(level)		\
-	lis	r8,level##_STACK_TOP@h;			\
-	ori	r8,r8,level##_STACK_TOP@l
+	lis	r8,level##_STACK_BASE@ha;		\
+	lwz	r8,level##_STACK_BASE@l(r8);		\
+	addi	r8,r8,EXC_LVL_FRAME_OVERHEAD;
 #endif
 
 /*
@@ -104,22 +103,36 @@
 #define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \
 	mtspr	exc_level##_SPRG,r8;					     \
 	BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
-	stw	r10,GPR10-INT_FRAME_SIZE(r8);				     \
-	stw	r11,GPR11-INT_FRAME_SIZE(r8);				     \
-	mfcr	r10;			/* save CR in r10 for now	   */\
-	mfspr	r11,exc_level_srr1;	/* check whether user or kernel    */\
-	andi.	r11,r11,MSR_PR;						     \
-	mr	r11,r8;							     \
-	mfspr	r8,exc_level##_SPRG;					     \
-	beq	1f;							     \
-	/* COMING FROM USER MODE */					     \
+	stw	r9,GPR9(r8);		/* save various registers	   */\
+	mfcr	r9;			/* save CR in r9 for now	   */\
+	stw	r10,GPR10(r8);						     \
+	stw	r11,GPR11(r8);						     \
+	stw	r9,_CCR(r8);		/* save CR on stack		   */\
+	mfspr	r10,exc_level_srr1;	/* check whether user or kernel    */\
+	andi.	r10,r10,MSR_PR;						     \
 	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
 	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
-	addi	r11,r11,THREAD_SIZE;					     \
-1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
-	stw	r10,_CCR(r11);          /* save various registers	   */\
-	stw	r12,GPR12(r11);						     \
+	addi	r11,r11,EXC_LVL_FRAME_OVERHEAD;	/* allocate stack frame    */\
+	beq	1f;							     \
+	/* COMING FROM USER MODE */					     \
+	stw	r9,_CCR(r11);		/* save CR			   */\
+	lwz	r10,GPR10(r8);		/* copy regs from exception stack  */\
+	lwz	r9,GPR9(r8);						     \
+	stw	r10,GPR10(r11);						     \
+	lwz	r10,GPR11(r8);						     \
 	stw	r9,GPR9(r11);						     \
+	stw	r10,GPR11(r11);						     \
+	b	2f;							     \
+	/* COMING FROM PRIV MODE */					     \
+1:	lwz	r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r11);		     \
+	lwz	r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r11);		     \
+	stw	r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r8);			     \
+	stw	r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r8);		     \
+	lwz	r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r11);			     \
+	stw	r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r8);			     \
+	mr	r11,r8;							     \
+2:	mfspr	r8,exc_level##_SPRG;					     \
+	stw	r12,GPR12(r11);		/* save various registers	   */\
 	mflr	r10;							     \
 	stw	r10,_LINK(r11);						     \
 	mfspr	r12,SPRN_DEAR;		/* save DEAR and ESR in the frame  */\
@@ -231,7 +244,7 @@ label:
 	 * the code where the exception occurred (since exception entry	      \
 	 * doesn't turn off DE automatically).  We simulate the effect	      \
 	 * of turning off DE on entry to an exception handler by turning      \
-	 * off DE in the CSRR1 value and clearing the debug status.	      \
+	 * off DE in the DSRR1 value and clearing the debug status.	      \
 	 */								      \
 	mfspr	r10,SPRN_DBSR;		/* check single-step/branch taken */  \
 	andis.	r10,r10,DBSR_IC@h;					      \
@@ -262,17 +275,17 @@ label:
 	lwz	r12,GPR12(r11);						      \
 	mtspr	DEBUG_SPRG,r8;						      \
 	BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \
-	lwz	r10,GPR10-INT_FRAME_SIZE(r8);				      \
-	lwz	r11,GPR11-INT_FRAME_SIZE(r8);				      \
+	lwz	r10,GPR10(r8);						      \
+	lwz	r11,GPR11(r8);						      \
 	mfspr	r8,DEBUG_SPRG;						      \
 									      \
 	RFDI;								      \
 	b	.;							      \
 									      \
-	/* continue normal handling for a critical exception... */	      \
+	/* continue normal handling for a debug exception... */		      \
 2:	mfspr	r4,SPRN_DBSR;						      \
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
+	EXC_XFER_TEMPLATE(DebugException, 0x2008, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
 
 #define DEBUG_CRIT_EXCEPTION						      \
 	START_EXCEPTION(DebugCrit);					      \
@@ -315,8 +328,8 @@ label:
 	lwz	r12,GPR12(r11);						      \
 	mtspr	CRIT_SPRG,r8;						      \
 	BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */  \
-	lwz	r10,GPR10-INT_FRAME_SIZE(r8);				      \
-	lwz	r11,GPR11-INT_FRAME_SIZE(r8);				      \
+	lwz	r10,GPR10(r8);						      \
+	lwz	r11,GPR11(r8);						      \
 	mfspr	r8,CRIT_SPRG;						      \
 									      \
 	rfci;								      \
@@ -327,6 +340,14 @@ label:
 	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
 	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
 
+#define DATA_STORAGE_EXCEPTION						      \
+	START_EXCEPTION(DataStorage)					      \
+	NORMAL_EXCEPTION_PROLOG;					      \
+	mfspr	r5,SPRN_ESR;		/* Grab the ESR and save it */	      \
+	stw	r5,_ESR(r11);						      \
+	mfspr	r4,SPRN_DEAR;		/* Grab the DEAR */		      \
+	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
+
 #define INSTRUCTION_STORAGE_EXCEPTION					      \
 	START_EXCEPTION(InstructionStorage)				      \
 	NORMAL_EXCEPTION_PROLOG;					      \
@@ -363,8 +384,31 @@ label:
 #define FP_UNAVAILABLE_EXCEPTION					      \
 	START_EXCEPTION(FloatingPointUnavailable)			      \
 	NORMAL_EXCEPTION_PROLOG;					      \
-	bne	load_up_fpu;		/* if from user, just load it up */   \
-	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
+	beq	1f;							      \
+	bl	load_up_fpu;		/* if from user, just load it up */   \
+	b	fast_exception_return;					      \
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
 	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
 
+#ifndef __ASSEMBLY__
+struct exception_regs {
+	unsigned long mas0;
+	unsigned long mas1;
+	unsigned long mas2;
+	unsigned long mas3;
+	unsigned long mas6;
+	unsigned long mas7;
+	unsigned long srr0;
+	unsigned long srr1;
+	unsigned long csrr0;
+	unsigned long csrr1;
+	unsigned long dsrr0;
+	unsigned long dsrr1;
+	unsigned long saved_ksp_limit;
+};
+
+/* ensure this structure is always sized to a multiple of the stack alignment */
+#define STACK_EXC_LVL_FRAME_SIZE	_ALIGN_UP(sizeof (struct exception_regs), 16)
+
+#endif /* __ASSEMBLY__ */
 #endif /* __HEAD_BOOKE_H__ */
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index e581524d85bc..3cb52fa0eda3 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -39,6 +39,7 @@
 #include <asm/thread_info.h>
 #include <asm/ppc_asm.h>
 #include <asm/asm-offsets.h>
+#include <asm/cache.h>
 #include "head_booke.h"
 
 /* As with the other PowerPC ports, it is expected that when code
@@ -150,16 +151,11 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	/* Invalidate TLB0 */
 	li	r6,0x04
 	tlbivax 0,r6
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
+	TLBSYNC
 	/* Invalidate TLB1 */
 	li	r6,0x0c
 	tlbivax 0,r6
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
-	msync
+	TLBSYNC
 
 /* 3. Setup a temp mapping and jump to it */
 	andi.	r5, r3, 0x1	/* Find an entry not used and is non-zero */
@@ -237,10 +233,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	/* Invalidate TLB1 */
 	li	r9,0x0c
 	tlbivax 0,r9
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
-	msync
+	TLBSYNC
 
 /* 6. Setup KERNELBASE mapping in TLB1[0] */
 	lis	r6,0x1000		/* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
@@ -282,10 +275,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	/* Invalidate TLB1 */
 	li	r9,0x0c
 	tlbivax 0,r9
-#ifdef CONFIG_SMP
-	tlbsync
-#endif
-	msync
+	TLBSYNC
 
 	/* Establish the interrupt vector offsets */
 	SET_IVOR(0,  CriticalInput);
@@ -304,7 +294,7 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	SET_IVOR(13, DataTLBError);
 	SET_IVOR(14, InstructionTLBError);
 	SET_IVOR(15, DebugDebug);
-#if defined(CONFIG_E500)
+#if defined(CONFIG_E500) && !defined(CONFIG_PPC_E500MC)
 	SET_IVOR(15, DebugCrit);
 #endif
 	SET_IVOR(32, SPEUnavailable);
@@ -313,6 +303,9 @@ skpinv:	addi	r6,r6,1				/* Increment */
 #ifndef CONFIG_E200
 	SET_IVOR(35, PerformanceMonitor);
 #endif
+#ifdef CONFIG_PPC_E500MC
+	SET_IVOR(36, Doorbell);
+#endif
 
 	/* Establish the interrupt vector base */
 	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
@@ -479,90 +472,16 @@ interrupt_base:
 
 	/* Data Storage Interrupt */
 	START_EXCEPTION(DataStorage)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-
-	/*
-	 * Check if it was a store fault, if not then bail
-	 * because a user tried to access a kernel or
-	 * read-protected page.  Otherwise, get the
-	 * offending address and handle it.
-	 */
-	mfspr	r10, SPRN_ESR
-	andis.	r10, r10, ESR_ST@h
-	beq	2f
-
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, PAGE_OFFSET@h
-	cmplw	0, r10, r11
-	bge	2f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-4:
-	FIND_PTE
-
-	/* Are _PAGE_USER & _PAGE_RW set & _PAGE_HWWRITE not? */
-	andi.	r13, r11, _PAGE_RW|_PAGE_USER|_PAGE_HWWRITE
-	cmpwi	0, r13, _PAGE_RW|_PAGE_USER
-	bne	2f			/* Bail if not */
-
-	/* Update 'changed'. */
-	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-	stw	r11, PTE_FLAGS_OFFSET(r12) /* Update Linux page table */
-
-	/* MAS2 not updated as the entry does exist in the tlb, this
-	   fault taken to detect state transition (eg: COW -> DIRTY)
-	 */
-	andi.	r11, r11, _PAGE_HWEXEC
-	rlwimi	r11, r11, 31, 27, 27	/* SX <- _PAGE_HWEXEC */
-	ori	r11, r11, (MAS3_UW|MAS3_SW|MAS3_UR|MAS3_SR)@l /* set static perms */
-
-	/* update search PID in MAS6, AS = 0 */
-	mfspr	r12, SPRN_PID0
-	slwi	r12, r12, 16
-	mtspr	SPRN_MAS6, r12
-
-	/* find the TLB index that caused the fault.  It has to be here. */
-	tlbsx	0, r10
-
-	/* only update the perm bits, assume the RPN is fine */
-	mfspr	r12, SPRN_MAS3
-	rlwimi	r12, r11, 0, 20, 31
-	mtspr	SPRN_MAS3,r12
-	tlbwe
-
-	/* Done...restore registers and get out of here.  */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	rfi			/* Force context change */
-
-2:
-	/*
-	 * The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	data_access
+	NORMAL_EXCEPTION_PROLOG
+	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
+	stw	r5,_ESR(r11)
+	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
+	andis.	r10,r5,(ESR_ILK|ESR_DLK)@h
+	bne	1f
+	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
+1:
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_EE_LITE(0x0300, CacheLockingException)
 
 	/* Instruction Storage Interrupt */
 	INSTRUCTION_STORAGE_EXCEPTION
@@ -641,15 +560,30 @@ interrupt_base:
 	lwz	r11,PGDIR(r11)
 
 4:
+	/* Mask of required permission bits. Note that while we
+	 * do copy ESR:ST to _PAGE_RW position as trying to write
+	 * to an RO page is pretty common, we don't do it with
+	 * _PAGE_DIRTY. We could do it, but it's a fairly rare
+	 * event so I'd rather take the overhead when it happens
+	 * rather than adding an instruction here. We should measure
+	 * whether the whole thing is worth it in the first place
+	 * as we could avoid loading SPRN_ESR completely in the first
+	 * place...
+	 *
+	 * TODO: Is it worth doing that mfspr & rlwimi in the first
+	 *       place or can we save a couple of instructions here ?
+	 */
+	mfspr	r12,SPRN_ESR
+	li	r13,_PAGE_PRESENT|_PAGE_ACCESSED
+	rlwimi	r13,r12,11,29,29
+
 	FIND_PTE
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
+	andc.	r13,r13,r11		/* Check permission */
+	bne	2f			/* Bail if permission mismach */
 
 #ifdef CONFIG_PTE_64BIT
 	lwz	r13, 0(r12)
 #endif
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, PTE_FLAGS_OFFSET(r12)
 
 	 /* Jump to common tlb load */
 	b	finish_tlb_load
@@ -663,7 +597,7 @@ interrupt_base:
 	mfspr	r12, SPRN_SPRG4R
 	mfspr	r11, SPRN_SPRG1
 	mfspr	r10, SPRN_SPRG0
-	b	data_access
+	b	DataStorage
 
 	/* Instruction TLB Error Interrupt */
 	/*
@@ -701,15 +635,16 @@ interrupt_base:
 	lwz	r11,PGDIR(r11)
 
 4:
+	/* Make up the required permissions */
+	li	r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC
+
 	FIND_PTE
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
+	andc.	r13,r13,r11		/* Check permission */
+	bne	2f			/* Bail if permission mismach */
 
 #ifdef CONFIG_PTE_64BIT
 	lwz	r13, 0(r12)
 #endif
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, PTE_FLAGS_OFFSET(r12)
 
 	/* Jump to common TLB load point */
 	b	finish_tlb_load
@@ -750,10 +685,13 @@ interrupt_base:
 	/* Performance Monitor */
 	EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD)
 
+#ifdef CONFIG_PPC_E500MC
+	EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_EE)
+#endif
 
 	/* Debug Interrupt */
 	DEBUG_DEBUG_EXCEPTION
-#if defined(CONFIG_E500)
+#if defined(CONFIG_E500) && !defined(CONFIG_PPC_E500MC)
 	DEBUG_CRIT_EXCEPTION
 #endif
 
@@ -761,29 +699,13 @@ interrupt_base:
  * Local functions
  */
 
-	/*
-	 * Data TLB exceptions will bail out to this point
-	 * if they can't resolve the lightweight TLB fault.
-	 */
-data_access:
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
-	stw	r5,_ESR(r11)
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
-	andis.	r10,r5,(ESR_ILK|ESR_DLK)@h
-	bne	1f
-	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
-1:
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE_LITE(0x0300, CacheLockingException)
-
 /*
-
  * Both the instruction and data TLB miss get to this
  * point to load the TLB.
  *	r10 - EA of fault
  *	r11 - TLB (info from Linux PTE)
- *	r12, r13 - available to use
+ *	r12 - available to use
+ *	r13 - upper bits of PTE (if PTE_64BIT) or available to use
  *	CR5 - results of addr >= PAGE_OFFSET
  *	MAS0, MAS1 - loaded with proper value when we get here
  *	MAS2, MAS3 - will need additional info from Linux PTE
@@ -805,20 +727,14 @@ finish_tlb_load:
 #endif
 	mtspr	SPRN_MAS2, r12
 
-	bge	5, 1f
-
-	/* is user addr */
-	andi.	r12, r11, (_PAGE_USER | _PAGE_HWWRITE | _PAGE_HWEXEC)
+	li	r10, (_PAGE_HWEXEC | _PAGE_PRESENT)
+	rlwimi	r10, r11, 31, 29, 29	/* extract _PAGE_DIRTY into SW */
+	and	r12, r11, r10
 	andi.	r10, r11, _PAGE_USER	/* Test for _PAGE_USER */
-	srwi	r10, r12, 1
-	or	r12, r12, r10	/* Copy user perms into supervisor */
-	iseleq	r12, 0, r12
-	b	2f
-
-	/* is kernel addr */
-1:	rlwinm	r12, r11, 31, 29, 29	/* Extract _PAGE_HWWRITE into SW */
-	ori	r12, r12, (MAS3_SX | MAS3_SR)
-
+	slwi	r10, r12, 1
+	or	r10, r10, r12
+	iseleq	r12, r12, r10
+	
 #ifdef CONFIG_PTE_64BIT
 2:	rlwimi	r12, r13, 24, 0, 7	/* grab RPN[32:39] */
 	rlwimi	r12, r11, 24, 8, 19	/* grab RPN[40:51] */
@@ -1065,6 +981,52 @@ _GLOBAL(set_context)
 	isync			/* Force context change */
 	blr
 
+_GLOBAL(flush_dcache_L1)
+	mfspr	r3,SPRN_L1CFG0
+
+	rlwinm	r5,r3,9,3	/* Extract cache block size */
+	twlgti	r5,1		/* Only 32 and 64 byte cache blocks
+				 * are currently defined.
+				 */
+	li	r4,32
+	subfic	r6,r5,2		/* r6 = log2(1KiB / cache block size) -
+				 *      log2(number of ways)
+				 */
+	slw	r5,r4,r5	/* r5 = cache block size */
+
+	rlwinm	r7,r3,0,0xff	/* Extract number of KiB in the cache */
+	mulli	r7,r7,13	/* An 8-way cache will require 13
+				 * loads per set.
+				 */
+	slw	r7,r7,r6
+
+	/* save off HID0 and set DCFA */
+	mfspr	r8,SPRN_HID0
+	ori	r9,r8,HID0_DCFA@l
+	mtspr	SPRN_HID0,r9
+	isync
+
+	lis	r4,KERNELBASE@h
+	mtctr	r7
+
+1:	lwz	r3,0(r4)	/* Load... */
+	add	r4,r4,r5
+	bdnz	1b
+
+	msync
+	lis	r4,KERNELBASE@h
+	mtctr	r7
+
+1:	dcbf	0,r4		/* ...and flush. */
+	add	r4,r4,r5
+	bdnz	1b
+	
+	/* restore HID0 */
+	mtspr	SPRN_HID0,r8
+	isync
+
+	blr
+
 /*
  * We put a few things here that have to be page-aligned. This stuff
  * goes at the beginning of the data segment, which is page-aligned.
@@ -1080,15 +1042,6 @@ empty_zero_page:
 swapper_pg_dir:
 	.space	PGD_TABLE_SIZE
 
-/* Reserved 4k for the critical exception stack & 4k for the machine
- * check stack per CPU for kernel mode exceptions */
-	.section .bss
-	.align 12
-exception_stack_bottom:
-	.space	BOOKE_EXCEPTION_STACK_SIZE * NR_CPUS
-	.globl	exception_stack_top
-exception_stack_top:
-
 /*
  * Room for two PTE pointers, usually the kernel and current user pointers
  * to their respective root page table.
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 9971159c8040..9d42eb57aea3 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -53,7 +53,7 @@ static struct device ibmebus_bus_device = { /* fake "parent" device */
 struct bus_type ibmebus_bus_type;
 
 /* These devices will automatically be added to the bus during init */
-static struct of_device_id __initdata builtin_matches[] = {
+static struct of_device_id __initdata ibmebus_matches[] = {
 	{ .compatible = "IBM,lhca" },
 	{ .compatible = "IBM,lhea" },
 	{},
@@ -82,7 +82,8 @@ static void ibmebus_free_coherent(struct device *dev,
 static dma_addr_t ibmebus_map_single(struct device *dev,
 				     void *ptr,
 				     size_t size,
-				     enum dma_data_direction direction)
+				     enum dma_data_direction direction,
+				     struct dma_attrs *attrs)
 {
 	return (dma_addr_t)(ptr);
 }
@@ -90,14 +91,16 @@ static dma_addr_t ibmebus_map_single(struct device *dev,
 static void ibmebus_unmap_single(struct device *dev,
 				 dma_addr_t dma_addr,
 				 size_t size,
-				 enum dma_data_direction direction)
+				 enum dma_data_direction direction,
+				 struct dma_attrs *attrs)
 {
 	return;
 }
 
 static int ibmebus_map_sg(struct device *dev,
 			  struct scatterlist *sgl,
-			  int nents, enum dma_data_direction direction)
+			  int nents, enum dma_data_direction direction,
+			  struct dma_attrs *attrs)
 {
 	struct scatterlist *sg;
 	int i;
@@ -112,7 +115,8 @@ static int ibmebus_map_sg(struct device *dev,
 
 static void ibmebus_unmap_sg(struct device *dev,
 			     struct scatterlist *sg,
-			     int nents, enum dma_data_direction direction)
+			     int nents, enum dma_data_direction direction,
+			     struct dma_attrs *attrs)
 {
 	return;
 }
@@ -350,7 +354,7 @@ static int __init ibmebus_bus_init(void)
 		return err;
 	}
 
-	err = ibmebus_create_devices(builtin_matches);
+	err = ibmebus_create_devices(ibmebus_matches);
 	if (err) {
 		device_unregister(&ibmebus_bus_device);
 		bus_unregister(&ibmebus_bus_type);
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index c3cf0e8f3ac1..d308a9f70f1b 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -60,7 +60,7 @@ void cpu_idle(void)
 
 	set_thread_flag(TIF_POLLING_NRFLAG);
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched() && !cpu_should_die()) {
 			ppc64_runlatch_off();
 
diff --git a/arch/powerpc/kernel/idle_6xx.S b/arch/powerpc/kernel/idle_6xx.S
index 01bcd52bbf8e..019b02d8844f 100644
--- a/arch/powerpc/kernel/idle_6xx.S
+++ b/arch/powerpc/kernel/idle_6xx.S
@@ -153,7 +153,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
  * address of current.  R11 points to the exception frame (physical
  * address).  We have to preserve r10.
  */
-_GLOBAL(power_save_6xx_restore)
+_GLOBAL(power_save_ppc32_restore)
 	lwz	r9,_LINK(r11)		/* interrupted in ppc6xx_idle: */
 	stw	r9,_NIP(r11)		/* make it do a blr */
 
diff --git a/arch/powerpc/kernel/idle_e500.S b/arch/powerpc/kernel/idle_e500.S
new file mode 100644
index 000000000000..06304034b393
--- /dev/null
+++ b/arch/powerpc/kernel/idle_e500.S
@@ -0,0 +1,93 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ * Dave Liu <daveliu@freescale.com>
+ * copy from idle_6xx.S and modify for e500 based processor,
+ * implement the power_save function in idle.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/threads.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+	.text
+
+_GLOBAL(e500_idle)
+	rlwinm	r3,r1,0,0,31-THREAD_SHIFT	/* current thread_info */
+	lwz	r4,TI_LOCAL_FLAGS(r3)	/* set napping bit */
+	ori	r4,r4,_TLF_NAPPING	/* so when we take an exception */
+	stw	r4,TI_LOCAL_FLAGS(r3)	/* it will return to our caller */
+
+	/* Check if we can nap or doze, put HID0 mask in r3 */
+	lis	r3,0
+BEGIN_FTR_SECTION
+	lis	r3,HID0_DOZE@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_DOZE)
+
+BEGIN_FTR_SECTION
+	/* Now check if user enabled NAP mode */
+	lis	r4,powersave_nap@ha
+	lwz	r4,powersave_nap@l(r4)
+	cmpwi	0,r4,0
+	beq	1f
+	stwu	r1,-16(r1)
+	mflr	r0
+	stw	r0,20(r1)
+	bl	flush_dcache_L1
+	lwz	r0,20(r1)
+	addi	r1,r1,16
+	mtlr	r0
+	lis	r3,HID0_NAP@h
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+BEGIN_FTR_SECTION
+	msync
+	li	r7,L2CSR0_L2FL@l
+	mtspr	SPRN_L2CSR0,r7
+2:
+	mfspr	r7,SPRN_L2CSR0
+	andi.	r4,r7,L2CSR0_L2FL@l
+	bne	2b
+END_FTR_SECTION_IFSET(CPU_FTR_L2CSR|CPU_FTR_CAN_NAP)
+1:
+	/* Go to NAP or DOZE now */
+	mfspr	r4,SPRN_HID0
+	rlwinm	r4,r4,0,~(HID0_DOZE|HID0_NAP|HID0_SLEEP)
+	or	r4,r4,r3
+	isync
+	mtspr	SPRN_HID0,r4
+	isync
+
+	mfmsr	r7
+	oris	r7,r7,MSR_WE@h
+	ori	r7,r7,MSR_EE
+	msync
+	mtmsr	r7
+	isync
+2:	b	2b
+
+/*
+ * Return from NAP/DOZE mode, restore some CPU specific registers,
+ * r2 containing physical address of current.
+ * r11 points to the exception frame (physical address).
+ * We have to preserve r10.
+ */
+_GLOBAL(power_save_ppc32_restore)
+	lwz	r9,_LINK(r11)		/* interrupted in e500_idle */
+	stw	r9,_NIP(r11)		/* make it do a blr */
+
+#ifdef CONFIG_SMP
+	mfspr	r12,SPRN_SPRG3
+	lwz	r11,TI_CPU(r12)		/* get cpu number * 4 */
+	slwi	r11,r11,2
+#else
+	li	r11,0
+#endif
+	b	transfer_to_handler_cont
diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c
index 0c663669bc32..550a19399bfa 100644
--- a/arch/powerpc/kernel/iommu.c
+++ b/arch/powerpc/kernel/iommu.c
@@ -49,6 +49,8 @@ static int novmerge = 1;
 
 static int protect4gb = 1;
 
+static void __iommu_free(struct iommu_table *, dma_addr_t, unsigned int);
+
 static inline unsigned long iommu_num_pages(unsigned long vaddr,
 					    unsigned long slen)
 {
@@ -186,10 +188,12 @@ static unsigned long iommu_range_alloc(struct device *dev,
 static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
 			      void *page, unsigned int npages,
 			      enum dma_data_direction direction,
-			      unsigned long mask, unsigned int align_order)
+			      unsigned long mask, unsigned int align_order,
+			      struct dma_attrs *attrs)
 {
 	unsigned long entry, flags;
 	dma_addr_t ret = DMA_ERROR_CODE;
+	int build_fail;
 
 	spin_lock_irqsave(&(tbl->it_lock), flags);
 
@@ -204,9 +208,21 @@ static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
 	ret = entry << IOMMU_PAGE_SHIFT;	/* Set the return dma address */
 
 	/* Put the TCEs in the HW table */
-	ppc_md.tce_build(tbl, entry, npages, (unsigned long)page & IOMMU_PAGE_MASK,
-			 direction);
+	build_fail = ppc_md.tce_build(tbl, entry, npages,
+	                              (unsigned long)page & IOMMU_PAGE_MASK,
+	                              direction, attrs);
+
+	/* ppc_md.tce_build() only returns non-zero for transient errors.
+	 * Clean up the table bitmap in this case and return
+	 * DMA_ERROR_CODE. For all other errors the functionality is
+	 * not altered.
+	 */
+	if (unlikely(build_fail)) {
+		__iommu_free(tbl, ret, npages);
 
+		spin_unlock_irqrestore(&(tbl->it_lock), flags);
+		return DMA_ERROR_CODE;
+	}
 
 	/* Flush/invalidate TLB caches if necessary */
 	if (ppc_md.tce_flush)
@@ -267,15 +283,15 @@ static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
 	spin_unlock_irqrestore(&(tbl->it_lock), flags);
 }
 
-int iommu_map_sg(struct device *dev, struct scatterlist *sglist,
-		 int nelems, unsigned long mask,
-		 enum dma_data_direction direction)
+int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
+		 struct scatterlist *sglist, int nelems,
+		 unsigned long mask, enum dma_data_direction direction,
+		 struct dma_attrs *attrs)
 {
-	struct iommu_table *tbl = dev->archdata.dma_data;
 	dma_addr_t dma_next = 0, dma_addr;
 	unsigned long flags;
 	struct scatterlist *s, *outs, *segstart;
-	int outcount, incount, i;
+	int outcount, incount, i, build_fail = 0;
 	unsigned int align;
 	unsigned long handle;
 	unsigned int max_seg_size;
@@ -336,7 +352,11 @@ int iommu_map_sg(struct device *dev, struct scatterlist *sglist,
 			    npages, entry, dma_addr);
 
 		/* Insert into HW table */
-		ppc_md.tce_build(tbl, entry, npages, vaddr & IOMMU_PAGE_MASK, direction);
+		build_fail = ppc_md.tce_build(tbl, entry, npages,
+		                              vaddr & IOMMU_PAGE_MASK,
+		                              direction, attrs);
+		if(unlikely(build_fail))
+			goto failure;
 
 		/* If we are in an open segment, try merging */
 		if (segstart != s) {
@@ -412,7 +432,8 @@ int iommu_map_sg(struct device *dev, struct scatterlist *sglist,
 
 
 void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
-		int nelems, enum dma_data_direction direction)
+		int nelems, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	struct scatterlist *sg;
 	unsigned long flags;
@@ -554,7 +575,7 @@ void iommu_free_table(struct iommu_table *tbl, const char *node_name)
  */
 dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
 			    void *vaddr, size_t size, unsigned long mask,
-			    enum dma_data_direction direction)
+		enum dma_data_direction direction, struct dma_attrs *attrs)
 {
 	dma_addr_t dma_handle = DMA_ERROR_CODE;
 	unsigned long uaddr;
@@ -572,7 +593,8 @@ dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
 			align = PAGE_SHIFT - IOMMU_PAGE_SHIFT;
 
 		dma_handle = iommu_alloc(dev, tbl, vaddr, npages, direction,
-					 mask >> IOMMU_PAGE_SHIFT, align);
+					 mask >> IOMMU_PAGE_SHIFT, align,
+					 attrs);
 		if (dma_handle == DMA_ERROR_CODE) {
 			if (printk_ratelimit())  {
 				printk(KERN_INFO "iommu_alloc failed, "
@@ -587,7 +609,8 @@ dma_addr_t iommu_map_single(struct device *dev, struct iommu_table *tbl,
 }
 
 void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
-		size_t size, enum dma_data_direction direction)
+		size_t size, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	unsigned int npages;
 
@@ -640,7 +663,7 @@ void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl,
 	nio_pages = size >> IOMMU_PAGE_SHIFT;
 	io_order = get_iommu_order(size);
 	mapping = iommu_alloc(dev, tbl, ret, nio_pages, DMA_BIDIRECTIONAL,
-			      mask >> IOMMU_PAGE_SHIFT, io_order);
+			      mask >> IOMMU_PAGE_SHIFT, io_order, NULL);
 	if (mapping == DMA_ERROR_CODE) {
 		free_pages((unsigned long)ret, order);
 		return NULL;
diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c
index dcc946e67099..d972decf0324 100644
--- a/arch/powerpc/kernel/irq.c
+++ b/arch/powerpc/kernel/irq.c
@@ -77,22 +77,12 @@ static int ppc_spurious_interrupts;
 EXPORT_SYMBOL(__irq_offset_value);
 atomic_t ppc_n_lost_interrupts;
 
-#ifndef CONFIG_PPC_MERGE
-#define NR_MASK_WORDS	((NR_IRQS + 31) / 32)
-unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
-#endif
-
 #ifdef CONFIG_TAU_INT
 extern int tau_initialized;
 extern int tau_interrupts(int);
 #endif
 #endif /* CONFIG_PPC32 */
 
-#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
-extern atomic_t ipi_recv;
-extern atomic_t ipi_sent;
-#endif
-
 #ifdef CONFIG_PPC64
 EXPORT_SYMBOL(irq_desc);
 
@@ -216,21 +206,14 @@ int show_interrupts(struct seq_file *p, void *v)
 skip:
 		spin_unlock_irqrestore(&desc->lock, flags);
 	} else if (i == NR_IRQS) {
-#ifdef CONFIG_PPC32
-#ifdef CONFIG_TAU_INT
+#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT)
 		if (tau_initialized){
 			seq_puts(p, "TAU: ");
 			for_each_online_cpu(j)
 				seq_printf(p, "%10u ", tau_interrupts(j));
 			seq_puts(p, "  PowerPC             Thermal Assist (cpu temp)\n");
 		}
-#endif
-#if defined(CONFIG_SMP) && !defined(CONFIG_PPC_MERGE)
-		/* should this be per processor send/receive? */
-		seq_printf(p, "IPI (recv/sent): %10u/%u\n",
-				atomic_read(&ipi_recv), atomic_read(&ipi_sent));
-#endif
-#endif /* CONFIG_PPC32 */
+#endif /* CONFIG_PPC32 && CONFIG_TAU_INT*/
 		seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts);
 	}
 	return 0;
@@ -356,9 +339,42 @@ void __init init_IRQ(void)
 {
 	if (ppc_md.init_IRQ)
 		ppc_md.init_IRQ();
+
+	exc_lvl_ctx_init();
+
 	irq_ctx_init();
 }
 
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+struct thread_info   *critirq_ctx[NR_CPUS] __read_mostly;
+struct thread_info    *dbgirq_ctx[NR_CPUS] __read_mostly;
+struct thread_info *mcheckirq_ctx[NR_CPUS] __read_mostly;
+
+void exc_lvl_ctx_init(void)
+{
+	struct thread_info *tp;
+	int i;
+
+	for_each_possible_cpu(i) {
+		memset((void *)critirq_ctx[i], 0, THREAD_SIZE);
+		tp = critirq_ctx[i];
+		tp->cpu = i;
+		tp->preempt_count = 0;
+
+#ifdef CONFIG_BOOKE
+		memset((void *)dbgirq_ctx[i], 0, THREAD_SIZE);
+		tp = dbgirq_ctx[i];
+		tp->cpu = i;
+		tp->preempt_count = 0;
+
+		memset((void *)mcheckirq_ctx[i], 0, THREAD_SIZE);
+		tp = mcheckirq_ctx[i];
+		tp->cpu = i;
+		tp->preempt_count = HARDIRQ_OFFSET;
+#endif
+	}
+}
+#endif
 
 #ifdef CONFIG_IRQSTACKS
 struct thread_info *softirq_ctx[NR_CPUS] __read_mostly;
@@ -421,8 +437,6 @@ void do_softirq(void)
  * IRQ controller and virtual interrupts
  */
 
-#ifdef CONFIG_PPC_MERGE
-
 static LIST_HEAD(irq_hosts);
 static DEFINE_SPINLOCK(irq_big_lock);
 static DEFINE_PER_CPU(unsigned int, irq_radix_reader);
@@ -465,7 +479,7 @@ struct irq_host *irq_alloc_host(struct device_node *of_node,
 	host->revmap_type = revmap_type;
 	host->inval_irq = inval_irq;
 	host->ops = ops;
-	host->of_node = of_node;
+	host->of_node = of_node_get(of_node);
 
 	if (host->ops->match == NULL)
 		host->ops->match = default_irq_host_match;
@@ -1081,8 +1095,6 @@ static int __init irq_debugfs_init(void)
 __initcall(irq_debugfs_init);
 #endif /* CONFIG_VIRQ_DEBUG */
 
-#endif /* CONFIG_PPC_MERGE */
-
 #ifdef CONFIG_PPC64
 static int __init setup_noirqdistrib(char *str)
 {
diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c
new file mode 100644
index 000000000000..b4fdf2f2743c
--- /dev/null
+++ b/arch/powerpc/kernel/kgdb.c
@@ -0,0 +1,410 @@
+/*
+ * PowerPC backend to the KGDB stub.
+ *
+ * 1998 (c) Michael AK Tesch (tesch@cs.wisc.edu)
+ * Copyright (C) 2003 Timesys Corporation.
+ * Copyright (C) 2004-2006 MontaVista Software, Inc.
+ * PPC64 Mods (C) 2005 Frank Rowand (frowand@mvista.com)
+ * PPC32 support restored by Vitaly Wool <vwool@ru.mvista.com> and
+ * Sergei Shtylyov <sshtylyov@ru.mvista.com>
+ * Copyright (C) 2007-2008 Wind River Systems, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program as licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/kgdb.h>
+#include <linux/smp.h>
+#include <linux/signal.h>
+#include <linux/ptrace.h>
+#include <asm/current.h>
+#include <asm/processor.h>
+#include <asm/machdep.h>
+
+/*
+ * This table contains the mapping between PowerPC hardware trap types, and
+ * signals, which are primarily what GDB understands.  GDB and the kernel
+ * don't always agree on values, so we use constants taken from gdb-6.2.
+ */
+static struct hard_trap_info
+{
+	unsigned int tt;		/* Trap type code for powerpc */
+	unsigned char signo;		/* Signal that we map this trap into */
+} hard_trap_info[] = {
+	{ 0x0100, 0x02 /* SIGINT */  },		/* system reset */
+	{ 0x0200, 0x0b /* SIGSEGV */ },		/* machine check */
+	{ 0x0300, 0x0b /* SIGSEGV */ },		/* data access */
+	{ 0x0400, 0x0b /* SIGSEGV */ },		/* instruction access */
+	{ 0x0500, 0x02 /* SIGINT */  },		/* external interrupt */
+	{ 0x0600, 0x0a /* SIGBUS */  },		/* alignment */
+	{ 0x0700, 0x05 /* SIGTRAP */ },		/* program check */
+	{ 0x0800, 0x08 /* SIGFPE */  },		/* fp unavailable */
+	{ 0x0900, 0x0e /* SIGALRM */ },		/* decrementer */
+	{ 0x0c00, 0x14 /* SIGCHLD */ },		/* system call */
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+	{ 0x2002, 0x05 /* SIGTRAP */ },		/* debug */
+#if defined(CONFIG_FSL_BOOKE)
+	{ 0x2010, 0x08 /* SIGFPE */  },		/* spe unavailable */
+	{ 0x2020, 0x08 /* SIGFPE */  },		/* spe unavailable */
+	{ 0x2030, 0x08 /* SIGFPE */  },		/* spe fp data */
+	{ 0x2040, 0x08 /* SIGFPE */  },		/* spe fp data */
+	{ 0x2050, 0x08 /* SIGFPE */  },		/* spe fp round */
+	{ 0x2060, 0x0e /* SIGILL */  },		/* performace monitor */
+	{ 0x2900, 0x08 /* SIGFPE */  },		/* apu unavailable */
+	{ 0x3100, 0x0e /* SIGALRM */ },		/* fixed interval timer */
+	{ 0x3200, 0x02 /* SIGINT */  }, 	/* watchdog */
+#else /* ! CONFIG_FSL_BOOKE */
+	{ 0x1000, 0x0e /* SIGALRM */ },		/* prog interval timer */
+	{ 0x1010, 0x0e /* SIGALRM */ },		/* fixed interval timer */
+	{ 0x1020, 0x02 /* SIGINT */  }, 	/* watchdog */
+	{ 0x2010, 0x08 /* SIGFPE */  },		/* fp unavailable */
+	{ 0x2020, 0x08 /* SIGFPE */  },		/* ap unavailable */
+#endif
+#else /* ! (defined(CONFIG_40x) || defined(CONFIG_BOOKE)) */
+	{ 0x0d00, 0x05 /* SIGTRAP */ },		/* single-step */
+#if defined(CONFIG_8xx)
+	{ 0x1000, 0x04 /* SIGILL */  },		/* software emulation */
+#else /* ! CONFIG_8xx */
+	{ 0x0f00, 0x04 /* SIGILL */  },		/* performance monitor */
+	{ 0x0f20, 0x08 /* SIGFPE */  },		/* altivec unavailable */
+	{ 0x1300, 0x05 /* SIGTRAP */ }, 	/* instruction address break */
+#if defined(CONFIG_PPC64)
+	{ 0x1200, 0x05 /* SIGILL */  },		/* system error */
+	{ 0x1500, 0x04 /* SIGILL */  },		/* soft patch */
+	{ 0x1600, 0x04 /* SIGILL */  },		/* maintenance */
+	{ 0x1700, 0x08 /* SIGFPE */  },		/* altivec assist */
+	{ 0x1800, 0x04 /* SIGILL */  },		/* thermal */
+#else /* ! CONFIG_PPC64 */
+	{ 0x1400, 0x02 /* SIGINT */  },		/* SMI */
+	{ 0x1600, 0x08 /* SIGFPE */  },		/* altivec assist */
+	{ 0x1700, 0x04 /* SIGILL */  },		/* TAU */
+	{ 0x2000, 0x05 /* SIGTRAP */ },		/* run mode */
+#endif
+#endif
+#endif
+	{ 0x0000, 0x00 }			/* Must be last */
+};
+
+static int computeSignal(unsigned int tt)
+{
+	struct hard_trap_info *ht;
+
+	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
+		if (ht->tt == tt)
+			return ht->signo;
+
+	return SIGHUP;		/* default for things we don't know about */
+}
+
+static int kgdb_call_nmi_hook(struct pt_regs *regs)
+{
+	kgdb_nmicallback(raw_smp_processor_id(), regs);
+	return 0;
+}
+
+#ifdef CONFIG_SMP
+void kgdb_roundup_cpus(unsigned long flags)
+{
+	smp_send_debugger_break(MSG_ALL_BUT_SELF);
+}
+#endif
+
+/* KGDB functions to use existing PowerPC64 hooks. */
+static int kgdb_debugger(struct pt_regs *regs)
+{
+	return kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs);
+}
+
+static int kgdb_handle_breakpoint(struct pt_regs *regs)
+{
+	if (user_mode(regs))
+		return 0;
+
+	if (kgdb_handle_exception(0, SIGTRAP, 0, regs) != 0)
+		return 0;
+
+	if (*(u32 *) (regs->nip) == *(u32 *) (&arch_kgdb_ops.gdb_bpt_instr))
+		regs->nip += 4;
+
+	return 1;
+}
+
+static int kgdb_singlestep(struct pt_regs *regs)
+{
+	struct thread_info *thread_info, *exception_thread_info;
+
+	if (user_mode(regs))
+		return 0;
+
+	/*
+	 * On Book E and perhaps other processsors, singlestep is handled on
+	 * the critical exception stack.  This causes current_thread_info()
+	 * to fail, since it it locates the thread_info by masking off
+	 * the low bits of the current stack pointer.  We work around
+	 * this issue by copying the thread_info from the kernel stack
+	 * before calling kgdb_handle_exception, and copying it back
+	 * afterwards.  On most processors the copy is avoided since
+	 * exception_thread_info == thread_info.
+	 */
+	thread_info = (struct thread_info *)(regs->gpr[1] & ~(THREAD_SIZE-1));
+	exception_thread_info = current_thread_info();
+
+	if (thread_info != exception_thread_info)
+		memcpy(exception_thread_info, thread_info, sizeof *thread_info);
+
+	kgdb_handle_exception(0, SIGTRAP, 0, regs);
+
+	if (thread_info != exception_thread_info)
+		memcpy(thread_info, exception_thread_info, sizeof *thread_info);
+
+	return 1;
+}
+
+static int kgdb_iabr_match(struct pt_regs *regs)
+{
+	if (user_mode(regs))
+		return 0;
+
+	if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0)
+		return 0;
+	return 1;
+}
+
+static int kgdb_dabr_match(struct pt_regs *regs)
+{
+	if (user_mode(regs))
+		return 0;
+
+	if (kgdb_handle_exception(0, computeSignal(TRAP(regs)), 0, regs) != 0)
+		return 0;
+	return 1;
+}
+
+#define PACK64(ptr, src) do { *(ptr++) = (src); } while (0)
+
+#define PACK32(ptr, src) do {          \
+	u32 *ptr32;                   \
+	ptr32 = (u32 *)ptr;           \
+	*(ptr32++) = (src);           \
+	ptr = (unsigned long *)ptr32; \
+	} while (0)
+
+
+void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	unsigned long *ptr = gdb_regs;
+	int reg;
+
+	memset(gdb_regs, 0, NUMREGBYTES);
+
+	for (reg = 0; reg < 32; reg++)
+		PACK64(ptr, regs->gpr[reg]);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+	for (reg = 0; reg < 32; reg++)
+		PACK64(ptr, current->thread.evr[reg]);
+#else
+	ptr += 32;
+#endif
+#else
+	/* fp registers not used by kernel, leave zero */
+	ptr += 32 * 8 / sizeof(long);
+#endif
+
+	PACK64(ptr, regs->nip);
+	PACK64(ptr, regs->msr);
+	PACK32(ptr, regs->ccr);
+	PACK64(ptr, regs->link);
+	PACK64(ptr, regs->ctr);
+	PACK32(ptr, regs->xer);
+
+	BUG_ON((unsigned long)ptr >
+	       (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+	struct pt_regs *regs = (struct pt_regs *)(p->thread.ksp +
+						  STACK_FRAME_OVERHEAD);
+	unsigned long *ptr = gdb_regs;
+	int reg;
+
+	memset(gdb_regs, 0, NUMREGBYTES);
+
+	/* Regs GPR0-2 */
+	for (reg = 0; reg < 3; reg++)
+		PACK64(ptr, regs->gpr[reg]);
+
+	/* Regs GPR3-13 are caller saved, not in regs->gpr[] */
+	ptr += 11;
+
+	/* Regs GPR14-31 */
+	for (reg = 14; reg < 32; reg++)
+		PACK64(ptr, regs->gpr[reg]);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+	for (reg = 0; reg < 32; reg++)
+		PACK64(ptr, p->thread.evr[reg]);
+#else
+	ptr += 32;
+#endif
+#else
+	/* fp registers not used by kernel, leave zero */
+	ptr += 32 * 8 / sizeof(long);
+#endif
+
+	PACK64(ptr, regs->nip);
+	PACK64(ptr, regs->msr);
+	PACK32(ptr, regs->ccr);
+	PACK64(ptr, regs->link);
+	PACK64(ptr, regs->ctr);
+	PACK32(ptr, regs->xer);
+
+	BUG_ON((unsigned long)ptr >
+	       (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+#define UNPACK64(dest, ptr) do { dest = *(ptr++); } while (0)
+
+#define UNPACK32(dest, ptr) do {       \
+	u32 *ptr32;                   \
+	ptr32 = (u32 *)ptr;           \
+	dest = *(ptr32++);            \
+	ptr = (unsigned long *)ptr32; \
+	} while (0)
+
+void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+	unsigned long *ptr = gdb_regs;
+	int reg;
+#ifdef CONFIG_SPE
+	union {
+		u32 v32[2];
+		u64 v64;
+	} acc;
+#endif
+
+	for (reg = 0; reg < 32; reg++)
+		UNPACK64(regs->gpr[reg], ptr);
+
+#ifdef CONFIG_FSL_BOOKE
+#ifdef CONFIG_SPE
+	for (reg = 0; reg < 32; reg++)
+		UNPACK64(current->thread.evr[reg], ptr);
+#else
+	ptr += 32;
+#endif
+#else
+	/* fp registers not used by kernel, leave zero */
+	ptr += 32 * 8 / sizeof(int);
+#endif
+
+	UNPACK64(regs->nip, ptr);
+	UNPACK64(regs->msr, ptr);
+	UNPACK32(regs->ccr, ptr);
+	UNPACK64(regs->link, ptr);
+	UNPACK64(regs->ctr, ptr);
+	UNPACK32(regs->xer, ptr);
+
+	BUG_ON((unsigned long)ptr >
+	       (unsigned long)(((void *)gdb_regs) + NUMREGBYTES));
+}
+
+/*
+ * This function does PowerPC specific procesing for interfacing to gdb.
+ */
+int kgdb_arch_handle_exception(int vector, int signo, int err_code,
+			       char *remcom_in_buffer, char *remcom_out_buffer,
+			       struct pt_regs *linux_regs)
+{
+	char *ptr = &remcom_in_buffer[1];
+	unsigned long addr;
+
+	switch (remcom_in_buffer[0]) {
+		/*
+		 * sAA..AA   Step one instruction from AA..AA
+		 * This will return an error to gdb ..
+		 */
+	case 's':
+	case 'c':
+		/* handle the optional parameter */
+		if (kgdb_hex2long(&ptr, &addr))
+			linux_regs->nip = addr;
+
+		atomic_set(&kgdb_cpu_doing_single_step, -1);
+		/* set the trace bit if we're stepping */
+		if (remcom_in_buffer[0] == 's') {
+#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+			mtspr(SPRN_DBCR0,
+			      mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
+			linux_regs->msr |= MSR_DE;
+#else
+			linux_regs->msr |= MSR_SE;
+#endif
+			kgdb_single_step = 1;
+			if (kgdb_contthread)
+				atomic_set(&kgdb_cpu_doing_single_step,
+					   raw_smp_processor_id());
+		}
+		return 0;
+	}
+
+	return -1;
+}
+
+/*
+ * Global data
+ */
+struct kgdb_arch arch_kgdb_ops = {
+	.gdb_bpt_instr = {0x7d, 0x82, 0x10, 0x08},
+};
+
+static int kgdb_not_implemented(struct pt_regs *regs)
+{
+	return 0;
+}
+
+static void *old__debugger_ipi;
+static void *old__debugger;
+static void *old__debugger_bpt;
+static void *old__debugger_sstep;
+static void *old__debugger_iabr_match;
+static void *old__debugger_dabr_match;
+static void *old__debugger_fault_handler;
+
+int kgdb_arch_init(void)
+{
+	old__debugger_ipi = __debugger_ipi;
+	old__debugger = __debugger;
+	old__debugger_bpt = __debugger_bpt;
+	old__debugger_sstep = __debugger_sstep;
+	old__debugger_iabr_match = __debugger_iabr_match;
+	old__debugger_dabr_match = __debugger_dabr_match;
+	old__debugger_fault_handler = __debugger_fault_handler;
+
+	__debugger_ipi = kgdb_call_nmi_hook;
+	__debugger = kgdb_debugger;
+	__debugger_bpt = kgdb_handle_breakpoint;
+	__debugger_sstep = kgdb_singlestep;
+	__debugger_iabr_match = kgdb_iabr_match;
+	__debugger_dabr_match = kgdb_dabr_match;
+	__debugger_fault_handler = kgdb_not_implemented;
+
+	return 0;
+}
+
+void kgdb_arch_exit(void)
+{
+	__debugger_ipi = old__debugger_ipi;
+	__debugger = old__debugger;
+	__debugger_bpt = old__debugger_bpt;
+	__debugger_sstep = old__debugger_sstep;
+	__debugger_iabr_match = old__debugger_iabr_match;
+	__debugger_dabr_match = old__debugger_dabr_match;
+	__debugger_fault_handler = old__debugger_fault_handler;
+}
diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c
index c176c513566b..de79915452c8 100644
--- a/arch/powerpc/kernel/kprobes.c
+++ b/arch/powerpc/kernel/kprobes.c
@@ -34,6 +34,13 @@
 #include <asm/cacheflush.h>
 #include <asm/sstep.h>
 #include <asm/uaccess.h>
+#include <asm/system.h>
+
+#ifdef CONFIG_BOOKE
+#define MSR_SINGLESTEP	(MSR_DE)
+#else
+#define MSR_SINGLESTEP	(MSR_SE)
+#endif
 
 DEFINE_PER_CPU(struct kprobe *, current_kprobe) = NULL;
 DEFINE_PER_CPU(struct kprobe_ctlblk, kprobe_ctlblk);
@@ -53,7 +60,8 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p)
 		ret = -EINVAL;
 	}
 
-	/* insn must be on a special executable page on ppc64 */
+	/* insn must be on a special executable page on ppc64.  This is
+	 * not explicitly required on ppc32 (right now), but it doesn't hurt */
 	if (!ret) {
 		p->ainsn.insn = get_insn_slot();
 		if (!p->ainsn.insn)
@@ -95,7 +103,16 @@ void __kprobes arch_remove_kprobe(struct kprobe *p)
 
 static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 {
-	regs->msr |= MSR_SE;
+	/* We turn off async exceptions to ensure that the single step will
+	 * be for the instruction we have the kprobe on, if we dont its
+	 * possible we'd get the single step reported for an exception handler
+	 * like Decrementer or External Interrupt */
+	regs->msr &= ~MSR_EE;
+	regs->msr |= MSR_SINGLESTEP;
+#ifdef CONFIG_BOOKE
+	regs->msr &= ~MSR_CE;
+	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
+#endif
 
 	/*
 	 * On powerpc we should single step on the original
@@ -127,7 +144,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 	kcb->kprobe_saved_msr = regs->msr;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
@@ -158,7 +174,8 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 			kprobe_opcode_t insn = *p->ainsn.insn;
 			if (kcb->kprobe_status == KPROBE_HIT_SS &&
 					is_trap(insn)) {
-				regs->msr &= ~MSR_SE;
+				/* Turn off 'trace' bits */
+				regs->msr &= ~MSR_SINGLESTEP;
 				regs->msr |= kcb->kprobe_saved_msr;
 				goto no_kprobe;
 			}
@@ -294,8 +311,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -334,7 +350,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	regs->nip = orig_ret_address;
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
@@ -376,6 +392,10 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 	if (!cur)
 		return 0;
 
+	/* make sure we got here for instruction we have a kprobe on */
+	if (((unsigned long)cur->ainsn.insn + 4) != regs->nip)
+		return 0;
+
 	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
 		kcb->kprobe_status = KPROBE_HIT_SSDONE;
 		cur->post_handler(cur, regs, 0);
@@ -395,10 +415,10 @@ out:
 
 	/*
 	 * if somebody else is singlestepping across a probe point, msr
-	 * will have SE set, in which case, continue the remaining processing
+	 * will have DE/SE set, in which case, continue the remaining processing
 	 * of do_debug, as if this is not a probe hit.
 	 */
-	if (regs->msr & MSR_SE)
+	if (regs->msr & MSR_SINGLESTEP)
 		return 0;
 
 	return 1;
@@ -421,7 +441,7 @@ int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
 		 * normal page fault.
 		 */
 		regs->nip = (unsigned long)cur->addr;
-		regs->msr &= ~MSR_SE;
+		regs->msr &= ~MSR_SINGLESTEP; /* Turn off 'trace' bits */
 		regs->msr |= kcb->kprobe_saved_msr;
 		if (kcb->kprobe_status == KPROBE_REENTER)
 			restore_previous_kprobe(kcb);
@@ -498,7 +518,7 @@ int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
 #ifdef CONFIG_PPC64
 unsigned long arch_deref_entry_point(void *entry)
 {
-	return (unsigned long)(((func_descr_t *)entry)->entry);
+	return ((func_descr_t *)entry)->entry;
 }
 #endif
 
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 4d96e1db55ee..9ddfaef1a184 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -493,18 +493,18 @@ static int __init serial_dev_init(void)
 device_initcall(serial_dev_init);
 
 
+#ifdef CONFIG_SERIAL_8250_CONSOLE
 /*
  * This is called very early, as part of console_init() (typically just after
  * time_init()). This function is respondible for trying to find a good
  * default console on serial ports. It tries to match the open firmware
- * default output with one of the available serial console drivers, either
- * one of the platform serial ports that have been probed earlier by
- * find_legacy_serial_ports() or some more platform specific ones.
+ * default output with one of the available serial console drivers that have
+ * been probed earlier by find_legacy_serial_ports()
  */
 static int __init check_legacy_serial_console(void)
 {
 	struct device_node *prom_stdout = NULL;
-	int speed = 0, offset = 0;
+	int i, speed = 0, offset = 0;
 	const char *name;
 	const u32 *spd;
 
@@ -548,31 +548,20 @@ static int __init check_legacy_serial_console(void)
 	if (spd)
 		speed = *spd;
 
-	if (0)
-		;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	else if (strcmp(name, "serial") == 0) {
-		int i;
-		/* Look for it in probed array */
-		for (i = 0; i < legacy_serial_count; i++) {
-			if (prom_stdout != legacy_serial_infos[i].np)
-				continue;
-			offset = i;
-			speed = legacy_serial_infos[i].speed;
-			break;
-		}
-		if (i >= legacy_serial_count)
-			goto not_found;
+	if (strcmp(name, "serial") != 0)
+		goto not_found;
+
+	/* Look for it in probed array */
+	for (i = 0; i < legacy_serial_count; i++) {
+		if (prom_stdout != legacy_serial_infos[i].np)
+			continue;
+		offset = i;
+		speed = legacy_serial_infos[i].speed;
+		break;
 	}
-#endif /* CONFIG_SERIAL_8250_CONSOLE */
-#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
-	else if (strcmp(name, "ch-a") == 0)
-		offset = 0;
-	else if (strcmp(name, "ch-b") == 0)
-		offset = 1;
-#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
-	else
+	if (i >= legacy_serial_count)
 		goto not_found;
+
 	of_node_put(prom_stdout);
 
 	DBG("Found serial console at ttyS%d\n", offset);
@@ -591,3 +580,4 @@ static int __init check_legacy_serial_console(void)
 }
 console_initcall(check_legacy_serial_console);
 
+#endif /* CONFIG_SERIAL_8250_CONSOLE */
diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c
index 1e656b43ad7f..1a09719c7628 100644
--- a/arch/powerpc/kernel/lparcfg.c
+++ b/arch/powerpc/kernel/lparcfg.c
@@ -34,8 +34,9 @@
 #include <asm/time.h>
 #include <asm/prom.h>
 #include <asm/vdso_datapage.h>
+#include <asm/vio.h>
 
-#define MODULE_VERS "1.7"
+#define MODULE_VERS "1.8"
 #define MODULE_NAME "lparcfg"
 
 /* #define LPARCFG_DEBUG */
@@ -129,32 +130,46 @@ static int iseries_lparcfg_data(struct seq_file *m, void *v)
 /*
  * Methods used to fetch LPAR data when running on a pSeries platform.
  */
-static void log_plpar_hcall_return(unsigned long rc, char *tag)
+/**
+ * h_get_mpp
+ * H_GET_MPP hcall returns info in 7 parms
+ */
+int h_get_mpp(struct hvcall_mpp_data *mpp_data)
 {
-	switch(rc) {
-	case 0:
-		return;
-	case H_HARDWARE:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Hardware fault\n", tag);
-		return;
-	case H_FUNCTION:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Function not allowed\n", tag);
-		return;
-	case H_AUTHORITY:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Not authorized to this function\n", tag);
-		return;
-	case H_PARAMETER:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Bad parameter(s)\n",tag);
-		return;
-	default:
-		printk(KERN_INFO "plpar-hcall (%s) "
-				"Unexpected rc(0x%lx)\n", tag, rc);
-	}
+	int rc;
+	unsigned long retbuf[PLPAR_HCALL9_BUFSIZE];
+
+	rc = plpar_hcall9(H_GET_MPP, retbuf);
+
+	mpp_data->entitled_mem = retbuf[0];
+	mpp_data->mapped_mem = retbuf[1];
+
+	mpp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
+	mpp_data->pool_num = retbuf[2] & 0xffff;
+
+	mpp_data->mem_weight = (retbuf[3] >> 7 * 8) & 0xff;
+	mpp_data->unallocated_mem_weight = (retbuf[3] >> 6 * 8) & 0xff;
+	mpp_data->unallocated_entitlement = retbuf[3] & 0xffffffffffff;
+
+	mpp_data->pool_size = retbuf[4];
+	mpp_data->loan_request = retbuf[5];
+	mpp_data->backing_mem = retbuf[6];
+
+	return rc;
 }
+EXPORT_SYMBOL(h_get_mpp);
+
+struct hvcall_ppp_data {
+	u64	entitlement;
+	u64	unallocated_entitlement;
+	u16	group_num;
+	u16	pool_num;
+	u8	capped;
+	u8	weight;
+	u8	unallocated_weight;
+	u16	active_procs_in_pool;
+	u16	active_system_procs;
+};
 
 /*
  * H_GET_PPP hcall returns info in 4 parms.
@@ -176,27 +191,30 @@ static void log_plpar_hcall_return(unsigned long rc, char *tag)
  *              XXXX - Active processors in Physical Processor Pool.
  *                  XXXX  - Processors active on platform.
  */
-static unsigned int h_get_ppp(unsigned long *entitled,
-			      unsigned long *unallocated,
-			      unsigned long *aggregation,
-			      unsigned long *resource)
+static unsigned int h_get_ppp(struct hvcall_ppp_data *ppp_data)
 {
 	unsigned long rc;
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
 
 	rc = plpar_hcall(H_GET_PPP, retbuf);
 
-	*entitled = retbuf[0];
-	*unallocated = retbuf[1];
-	*aggregation = retbuf[2];
-	*resource = retbuf[3];
+	ppp_data->entitlement = retbuf[0];
+	ppp_data->unallocated_entitlement = retbuf[1];
 
-	log_plpar_hcall_return(rc, "H_GET_PPP");
+	ppp_data->group_num = (retbuf[2] >> 2 * 8) & 0xffff;
+	ppp_data->pool_num = retbuf[2] & 0xffff;
+
+	ppp_data->capped = (retbuf[3] >> 6 * 8) & 0x01;
+	ppp_data->weight = (retbuf[3] >> 5 * 8) & 0xff;
+	ppp_data->unallocated_weight = (retbuf[3] >> 4 * 8) & 0xff;
+	ppp_data->active_procs_in_pool = (retbuf[3] >> 2 * 8) & 0xffff;
+	ppp_data->active_system_procs = retbuf[3] & 0xffff;
 
 	return rc;
 }
 
-static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
+static unsigned h_pic(unsigned long *pool_idle_time,
+		      unsigned long *num_procs)
 {
 	unsigned long rc;
 	unsigned long retbuf[PLPAR_HCALL_BUFSIZE];
@@ -206,8 +224,87 @@ static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs)
 	*pool_idle_time = retbuf[0];
 	*num_procs = retbuf[1];
 
-	if (rc != H_AUTHORITY)
-		log_plpar_hcall_return(rc, "H_PIC");
+	return rc;
+}
+
+/*
+ * parse_ppp_data
+ * Parse out the data returned from h_get_ppp and h_pic
+ */
+static void parse_ppp_data(struct seq_file *m)
+{
+	struct hvcall_ppp_data ppp_data;
+	int rc;
+
+	rc = h_get_ppp(&ppp_data);
+	if (rc)
+		return;
+
+	seq_printf(m, "partition_entitled_capacity=%ld\n",
+	           ppp_data.entitlement);
+	seq_printf(m, "group=%d\n", ppp_data.group_num);
+	seq_printf(m, "system_active_processors=%d\n",
+	           ppp_data.active_system_procs);
+
+	/* pool related entries are apropriate for shared configs */
+	if (lppaca[0].shared_proc) {
+		unsigned long pool_idle_time, pool_procs;
+
+		seq_printf(m, "pool=%d\n", ppp_data.pool_num);
+
+		/* report pool_capacity in percentage */
+		seq_printf(m, "pool_capacity=%d\n",
+			   ppp_data.active_procs_in_pool * 100);
+
+		h_pic(&pool_idle_time, &pool_procs);
+		seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
+		seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
+	}
+
+	seq_printf(m, "unallocated_capacity_weight=%d\n",
+		   ppp_data.unallocated_weight);
+	seq_printf(m, "capacity_weight=%d\n", ppp_data.weight);
+	seq_printf(m, "capped=%d\n", ppp_data.capped);
+	seq_printf(m, "unallocated_capacity=%ld\n",
+		   ppp_data.unallocated_entitlement);
+}
+
+/**
+ * parse_mpp_data
+ * Parse out data returned from h_get_mpp
+ */
+static void parse_mpp_data(struct seq_file *m)
+{
+	struct hvcall_mpp_data mpp_data;
+	int rc;
+
+	rc = h_get_mpp(&mpp_data);
+	if (rc)
+		return;
+
+	seq_printf(m, "entitled_memory=%ld\n", mpp_data.entitled_mem);
+
+	if (mpp_data.mapped_mem != -1)
+		seq_printf(m, "mapped_entitled_memory=%ld\n",
+		           mpp_data.mapped_mem);
+
+	seq_printf(m, "entitled_memory_group_number=%d\n", mpp_data.group_num);
+	seq_printf(m, "entitled_memory_pool_number=%d\n", mpp_data.pool_num);
+
+	seq_printf(m, "entitled_memory_weight=%d\n", mpp_data.mem_weight);
+	seq_printf(m, "unallocated_entitled_memory_weight=%d\n",
+	           mpp_data.unallocated_mem_weight);
+	seq_printf(m, "unallocated_io_mapping_entitlement=%ld\n",
+	           mpp_data.unallocated_entitlement);
+
+	if (mpp_data.pool_size != -1)
+		seq_printf(m, "entitled_memory_pool_size=%ld bytes\n",
+		           mpp_data.pool_size);
+
+	seq_printf(m, "entitled_memory_loan_request=%ld\n",
+	           mpp_data.loan_request);
+
+	seq_printf(m, "backing_memory=%ld bytes\n", mpp_data.backing_mem);
 }
 
 #define SPLPAR_CHARACTERISTICS_TOKEN 20
@@ -313,6 +410,25 @@ static int lparcfg_count_active_processors(void)
 	return count;
 }
 
+static void pseries_cmo_data(struct seq_file *m)
+{
+	int cpu;
+	unsigned long cmo_faults = 0;
+	unsigned long cmo_fault_time = 0;
+
+	if (!firmware_has_feature(FW_FEATURE_CMO))
+		return;
+
+	for_each_possible_cpu(cpu) {
+		cmo_faults += lppaca[cpu].cmo_faults;
+		cmo_fault_time += lppaca[cpu].cmo_fault_time;
+	}
+
+	seq_printf(m, "cmo_faults=%lu\n", cmo_faults);
+	seq_printf(m, "cmo_fault_time_usec=%lu\n",
+		   cmo_fault_time / tb_ticks_per_usec);
+}
+
 static int pseries_lparcfg_data(struct seq_file *m, void *v)
 {
 	int partition_potential_processors;
@@ -334,60 +450,13 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 	partition_active_processors = lparcfg_count_active_processors();
 
 	if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
-		unsigned long h_entitled, h_unallocated;
-		unsigned long h_aggregation, h_resource;
-		unsigned long pool_idle_time, pool_procs;
-		unsigned long purr;
-
-		h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation,
-			  &h_resource);
-
-		seq_printf(m, "R4=0x%lx\n", h_entitled);
-		seq_printf(m, "R5=0x%lx\n", h_unallocated);
-		seq_printf(m, "R6=0x%lx\n", h_aggregation);
-		seq_printf(m, "R7=0x%lx\n", h_resource);
-
-		purr = get_purr();
-
 		/* this call handles the ibm,get-system-parameter contents */
 		parse_system_parameter_string(m);
+		parse_ppp_data(m);
+		parse_mpp_data(m);
+		pseries_cmo_data(m);
 
-		seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled);
-
-		seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff);
-
-		seq_printf(m, "system_active_processors=%ld\n",
-			   (h_resource >> 0 * 8) & 0xffff);
-
-		/* pool related entries are apropriate for shared configs */
-		if (lppaca[0].shared_proc) {
-
-			h_pic(&pool_idle_time, &pool_procs);
-
-			seq_printf(m, "pool=%ld\n",
-				   (h_aggregation >> 0 * 8) & 0xffff);
-
-			/* report pool_capacity in percentage */
-			seq_printf(m, "pool_capacity=%ld\n",
-				   ((h_resource >> 2 * 8) & 0xffff) * 100);
-
-			seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time);
-
-			seq_printf(m, "pool_num_procs=%ld\n", pool_procs);
-		}
-
-		seq_printf(m, "unallocated_capacity_weight=%ld\n",
-			   (h_resource >> 4 * 8) & 0xFF);
-
-		seq_printf(m, "capacity_weight=%ld\n",
-			   (h_resource >> 5 * 8) & 0xFF);
-
-		seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01);
-
-		seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated);
-
-		seq_printf(m, "purr=%ld\n", purr);
-
+		seq_printf(m, "purr=%ld\n", get_purr());
 	} else {		/* non SPLPAR case */
 
 		seq_printf(m, "system_active_processors=%d\n",
@@ -414,6 +483,83 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 	return 0;
 }
 
+static ssize_t update_ppp(u64 *entitlement, u8 *weight)
+{
+	struct hvcall_ppp_data ppp_data;
+	u8 new_weight;
+	u64 new_entitled;
+	ssize_t retval;
+
+	/* Get our current parameters */
+	retval = h_get_ppp(&ppp_data);
+	if (retval)
+		return retval;
+
+	if (entitlement) {
+		new_weight = ppp_data.weight;
+		new_entitled = *entitlement;
+	} else if (weight) {
+		new_weight = *weight;
+		new_entitled = ppp_data.entitlement;
+	} else
+		return -EINVAL;
+
+	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+	         __FUNCTION__, ppp_data.entitlement, ppp_data.weight);
+
+	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+		 __FUNCTION__, new_entitled, new_weight);
+
+	retval = plpar_hcall_norets(H_SET_PPP, new_entitled, new_weight);
+	return retval;
+}
+
+/**
+ * update_mpp
+ *
+ * Update the memory entitlement and weight for the partition.  Caller must
+ * specify either a new entitlement or weight, not both, to be updated
+ * since the h_set_mpp call takes both entitlement and weight as parameters.
+ */
+static ssize_t update_mpp(u64 *entitlement, u8 *weight)
+{
+	struct hvcall_mpp_data mpp_data;
+	u64 new_entitled;
+	u8 new_weight;
+	ssize_t rc;
+
+	if (entitlement) {
+		/* Check with vio to ensure the new memory entitlement
+		 * can be handled.
+		 */
+		rc = vio_cmo_entitlement_update(*entitlement);
+		if (rc)
+			return rc;
+	}
+
+	rc = h_get_mpp(&mpp_data);
+	if (rc)
+		return rc;
+
+	if (entitlement) {
+		new_weight = mpp_data.mem_weight;
+		new_entitled = *entitlement;
+	} else if (weight) {
+		new_weight = *weight;
+		new_entitled = mpp_data.entitled_mem;
+	} else
+		return -EINVAL;
+
+	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
+	         __FUNCTION__, mpp_data.entitled_mem, mpp_data.mem_weight);
+
+	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
+	         __FUNCTION__, new_entitled, new_weight);
+
+	rc = plpar_hcall_norets(H_SET_MPP, new_entitled, new_weight);
+	return rc;
+}
+
 /*
  * Interface for changing system parameters (variable capacity weight
  * and entitled capacity).  Format of input is "param_name=value";
@@ -427,35 +573,27 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v)
 static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 			     size_t count, loff_t * off)
 {
-	char *kbuf;
+	int kbuf_sz = 64;
+	char kbuf[kbuf_sz];
 	char *tmp;
 	u64 new_entitled, *new_entitled_ptr = &new_entitled;
 	u8 new_weight, *new_weight_ptr = &new_weight;
-
-	unsigned long current_entitled;	/* parameters for h_get_ppp */
-	unsigned long dummy;
-	unsigned long resource;
-	u8 current_weight;
-
-	ssize_t retval = -ENOMEM;
+	ssize_t retval;
 
 	if (!firmware_has_feature(FW_FEATURE_SPLPAR) ||
 			firmware_has_feature(FW_FEATURE_ISERIES))
 		return -EINVAL;
 
-	kbuf = kmalloc(count, GFP_KERNEL);
-	if (!kbuf)
-		goto out;
+	if (count > kbuf_sz)
+		return -EINVAL;
 
-	retval = -EFAULT;
 	if (copy_from_user(kbuf, buf, count))
-		goto out;
+		return -EFAULT;
 
-	retval = -EINVAL;
 	kbuf[count - 1] = '\0';
 	tmp = strchr(kbuf, '=');
 	if (!tmp)
-		goto out;
+		return -EINVAL;
 
 	*tmp++ = '\0';
 
@@ -463,34 +601,32 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 		char *endp;
 		*new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10);
 		if (endp == tmp)
-			goto out;
-		new_weight_ptr = &current_weight;
+			return -EINVAL;
+
+		retval = update_ppp(new_entitled_ptr, NULL);
 	} else if (!strcmp(kbuf, "capacity_weight")) {
 		char *endp;
 		*new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10);
 		if (endp == tmp)
-			goto out;
-		new_entitled_ptr = &current_entitled;
-	} else
-		goto out;
-
-	/* Get our current parameters */
-	retval = h_get_ppp(&current_entitled, &dummy, &dummy, &resource);
-	if (retval) {
-		retval = -EIO;
-		goto out;
-	}
-
-	current_weight = (resource >> 5 * 8) & 0xFF;
+			return -EINVAL;
 
-	pr_debug("%s: current_entitled = %lu, current_weight = %u\n",
-		 __func__, current_entitled, current_weight);
+		retval = update_ppp(NULL, new_weight_ptr);
+	} else if (!strcmp(kbuf, "entitled_memory")) {
+		char *endp;
+		*new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10);
+		if (endp == tmp)
+			return -EINVAL;
 
-	pr_debug("%s: new_entitled = %lu, new_weight = %u\n",
-		 __func__, *new_entitled_ptr, *new_weight_ptr);
+		retval = update_mpp(new_entitled_ptr, NULL);
+	} else if (!strcmp(kbuf, "entitled_memory_weight")) {
+		char *endp;
+		*new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10);
+		if (endp == tmp)
+			return -EINVAL;
 
-	retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr,
-				    *new_weight_ptr);
+		retval = update_mpp(NULL, new_weight_ptr);
+	} else
+		return -EINVAL;
 
 	if (retval == H_SUCCESS || retval == H_CONSTRAINED) {
 		retval = count;
@@ -500,14 +636,8 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf,
 		retval = -EIO;
 	} else if (retval == H_PARAMETER) {
 		retval = -EINVAL;
-	} else {
-		printk(KERN_WARNING "%s: received unknown hv return code %ld",
-		       __func__, retval);
-		retval = -EIO;
 	}
 
-out:
-	kfree(kbuf);
 	return retval;
 }
 
@@ -573,7 +703,7 @@ static int lparcfg_open(struct inode *inode, struct file *file)
 	return single_open(file, lparcfg_data, NULL);
 }
 
-const struct file_operations lparcfg_fops = {
+static const struct file_operations lparcfg_fops = {
 	.owner		= THIS_MODULE,
 	.read		= seq_read,
 	.write		= lparcfg_write,
@@ -581,7 +711,7 @@ const struct file_operations lparcfg_fops = {
 	.release	= single_release,
 };
 
-int __init lparcfg_init(void)
+static int __init lparcfg_init(void)
 {
 	struct proc_dir_entry *ent;
 	mode_t mode = S_IRUSR | S_IRGRP | S_IROTH;
@@ -601,7 +731,7 @@ int __init lparcfg_init(void)
 	return 0;
 }
 
-void __exit lparcfg_cleanup(void)
+static void __exit lparcfg_cleanup(void)
 {
 	if (proc_ppc64_lparcfg)
 		remove_proc_entry("lparcfg", proc_ppc64_lparcfg->parent);
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index 29a0e039d436..aab76887a842 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -48,7 +48,7 @@ void machine_kexec_cleanup(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 	if (ppc_md.machine_kexec)
 		ppc_md.machine_kexec(image);
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 704375bda73a..a168514d8609 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -158,7 +158,7 @@ void kexec_copy_flush(struct kimage *image)
  * on calling the interrupts, but we would like to call it off irq level
  * so that the interrupt controller is clean.
  */
-void kexec_smp_down(void *arg)
+static void kexec_smp_down(void *arg)
 {
 	if (ppc_md.kexec_cpu_down)
 		ppc_md.kexec_cpu_down(0, 1);
@@ -172,7 +172,7 @@ static void kexec_prepare_cpus(void)
 {
 	int my_cpu, i, notified=-1;
 
-	smp_call_function(kexec_smp_down, NULL, 0, /* wait */0);
+	smp_call_function(kexec_smp_down, NULL, /* wait */0);
 	my_cpu = get_cpu();
 
 	/* check the others cpus are now down (via paca hw cpu id == -1) */
@@ -249,7 +249,7 @@ static void kexec_prepare_cpus(void)
  * We could use a smaller stack if we don't care about anything using
  * current, but that audit has not been performed.
  */
-union thread_union kexec_stack
+static union thread_union kexec_stack
 	__attribute__((__section__(".data.init_task"))) = { };
 
 /* Our assembly helper, in kexec_stub.S */
diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S
index 7b9160220698..85cb6f340846 100644
--- a/arch/powerpc/kernel/misc.S
+++ b/arch/powerpc/kernel/misc.S
@@ -116,3 +116,8 @@ _GLOBAL(longjmp)
 	mtlr	r0
 	mr	r3,r4
 	blr
+
+_GLOBAL(__setup_cpu_power7)
+_GLOBAL(__restore_cpu_power7)
+	/* place holder */
+	blr
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 89aaaa6f3561..6321ae36f729 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -489,7 +489,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE)
  *
  * flush_icache_range(unsigned long start, unsigned long stop)
  */
-_GLOBAL(__flush_icache_range)
+_KPROBE(__flush_icache_range)
 BEGIN_FTR_SECTION
 	blr				/* for 601, do nothing */
 END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S
index 942951e76586..4dd70cf7bb4e 100644
--- a/arch/powerpc/kernel/misc_64.S
+++ b/arch/powerpc/kernel/misc_64.S
@@ -506,6 +506,39 @@ _GLOBAL(giveup_altivec)
 
 #endif /* CONFIG_ALTIVEC */
 
+#ifdef CONFIG_VSX
+/*
+ * __giveup_vsx(tsk)
+ * Disable VSX for the task given as the argument.
+ * Does NOT save vsx registers.
+ * Enables the VSX for use in the kernel on return.
+ */
+_GLOBAL(__giveup_vsx)
+	mfmsr	r5
+	oris	r5,r5,MSR_VSX@h
+	mtmsrd	r5			/* enable use of VSX now */
+	isync
+
+	cmpdi	0,r3,0
+	beqlr-				/* if no previous owner, done */
+	addi	r3,r3,THREAD		/* want THREAD of task */
+	ld	r5,PT_REGS(r3)
+	cmpdi	0,r5,0
+	beq	1f
+	ld	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+	lis	r3,MSR_VSX@h
+	andc	r4,r4,r3		/* disable VSX for previous task */
+	std	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
+1:
+#ifndef CONFIG_SMP
+	li	r5,0
+	ld	r4,last_task_used_vsx@got(r2)
+	std	r5,0(r4)
+#endif /* CONFIG_SMP */
+	blr
+
+#endif /* CONFIG_VSX */
+
 /* kexec_wait(phys_cpu)
  *
  * wait for the flag to change, indicating this kernel is going away but
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
new file mode 100644
index 000000000000..af07003573c4
--- /dev/null
+++ b/arch/powerpc/kernel/module.c
@@ -0,0 +1,116 @@
+/*  Kernel module help for powerpc.
+    Copyright (C) 2001, 2003 Rusty Russell IBM Corporation.
+    Copyright (C) 2008 Freescale Semiconductor, Inc.
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+#include <linux/module.h>
+#include <linux/elf.h>
+#include <linux/moduleloader.h>
+#include <linux/err.h>
+#include <linux/vmalloc.h>
+#include <linux/bug.h>
+#include <asm/module.h>
+#include <asm/uaccess.h>
+#include <asm/firmware.h>
+#include <linux/sort.h>
+
+#include "setup.h"
+
+LIST_HEAD(module_bug_list);
+
+void *module_alloc(unsigned long size)
+{
+	if (size == 0)
+		return NULL;
+
+	return vmalloc_exec(size);
+}
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+	vfree(module_region);
+	/* FIXME: If module_region == mod->init_region, trim exception
+           table entries. */
+}
+
+static const Elf_Shdr *find_section(const Elf_Ehdr *hdr,
+				    const Elf_Shdr *sechdrs,
+				    const char *name)
+{
+	char *secstrings;
+	unsigned int i;
+
+	secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+	for (i = 1; i < hdr->e_shnum; i++)
+		if (strcmp(secstrings+sechdrs[i].sh_name, name) == 0)
+			return &sechdrs[i];
+	return NULL;
+}
+
+int module_finalize(const Elf_Ehdr *hdr,
+		const Elf_Shdr *sechdrs, struct module *me)
+{
+	const Elf_Shdr *sect;
+	int err;
+
+	err = module_bug_finalize(hdr, sechdrs, me);
+	if (err)
+		return err;
+
+	/* Apply feature fixups */
+	sect = find_section(hdr, sechdrs, "__ftr_fixup");
+	if (sect != NULL)
+		do_feature_fixups(cur_cpu_spec->cpu_features,
+				  (void *)sect->sh_addr,
+				  (void *)sect->sh_addr + sect->sh_size);
+
+#ifdef CONFIG_PPC64
+	sect = find_section(hdr, sechdrs, "__fw_ftr_fixup");
+	if (sect != NULL)
+		do_feature_fixups(powerpc_firmware_features,
+				  (void *)sect->sh_addr,
+				  (void *)sect->sh_addr + sect->sh_size);
+#endif
+
+	sect = find_section(hdr, sechdrs, "__lwsync_fixup");
+	if (sect != NULL)
+		do_lwsync_fixups(cur_cpu_spec->cpu_features,
+				 (void *)sect->sh_addr,
+				 (void *)sect->sh_addr + sect->sh_size);
+
+	return 0;
+}
+
+void module_arch_cleanup(struct module *mod)
+{
+	module_bug_cleanup(mod);
+}
+
+struct bug_entry *module_find_bug(unsigned long bugaddr)
+{
+	struct mod_arch_specific *mod;
+	unsigned int i;
+	struct bug_entry *bug;
+
+	list_for_each_entry(mod, &module_bug_list, bug_list) {
+		bug = mod->bug_table;
+		for (i = 0; i < mod->num_bugs; ++i, ++bug)
+			if (bugaddr == bug->bug_addr)
+				return bug;
+	}
+	return NULL;
+}
diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c
index eab313858315..2df91a03462a 100644
--- a/arch/powerpc/kernel/module_32.c
+++ b/arch/powerpc/kernel/module_32.c
@@ -34,23 +34,6 @@
 #define DEBUGP(fmt , ...)
 #endif
 
-LIST_HEAD(module_bug_list);
-
-void *module_alloc(unsigned long size)
-{
-	if (size == 0)
-		return NULL;
-	return vmalloc(size);
-}
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
-}
-
 /* Count how many different relocations (different symbol, different
    addend) */
 static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num)
@@ -325,58 +308,3 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
 	}
 	return 0;
 }
-
-static const Elf_Shdr *find_section(const Elf_Ehdr *hdr,
-				    const Elf_Shdr *sechdrs,
-				    const char *name)
-{
-	char *secstrings;
-	unsigned int i;
-
-	secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-	for (i = 1; i < hdr->e_shnum; i++)
-		if (strcmp(secstrings+sechdrs[i].sh_name, name) == 0)
-			return &sechdrs[i];
-	return NULL;
-}
-
-int module_finalize(const Elf_Ehdr *hdr,
-		    const Elf_Shdr *sechdrs,
-		    struct module *me)
-{
-	const Elf_Shdr *sect;
-	int err;
-
-	err = module_bug_finalize(hdr, sechdrs, me);
-	if (err)		/* never true, currently */
-		return err;
-
-	/* Apply feature fixups */
-	sect = find_section(hdr, sechdrs, "__ftr_fixup");
-	if (sect != NULL)
-		do_feature_fixups(cur_cpu_spec->cpu_features,
-				  (void *)sect->sh_addr,
-				  (void *)sect->sh_addr + sect->sh_size);
-
-	return 0;
-}
-
-void module_arch_cleanup(struct module *mod)
-{
-	module_bug_cleanup(mod);
-}
-
-struct bug_entry *module_find_bug(unsigned long bugaddr)
-{
-	struct mod_arch_specific *mod;
-	unsigned int i;
-	struct bug_entry *bug;
-
-	list_for_each_entry(mod, &module_bug_list, bug_list) {
-		bug = mod->bug_table;
-		for (i = 0; i < mod->num_bugs; ++i, ++bug)
-			if (bugaddr == bug->bug_addr)
-				return bug;
-	}
-	return NULL;
-}
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 3a82b02b784b..ee6a2982d567 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -24,6 +24,7 @@
 #include <asm/module.h>
 #include <asm/uaccess.h>
 #include <asm/firmware.h>
+#include <asm/code-patching.h>
 #include <linux/sort.h>
 
 #include "setup.h"
@@ -101,22 +102,6 @@ static unsigned int count_relocs(const Elf64_Rela *rela, unsigned int num)
 	return _count_relocs;
 }
 
-void *module_alloc(unsigned long size)
-{
-	if (size == 0)
-		return NULL;
-
-	return vmalloc_exec(size);
-}
-
-/* Free memory returned from module_alloc */
-void module_free(struct module *mod, void *module_region)
-{
-	vfree(module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
-}
-
 static int relacmp(const void *_x, const void *_y)
 {
 	const Elf64_Rela *x, *y;
@@ -346,7 +331,7 @@ static unsigned long stub_for_addr(Elf64_Shdr *sechdrs,
    restore r2. */
 static int restore_r2(u32 *instruction, struct module *me)
 {
-	if (*instruction != 0x60000000) {
+	if (*instruction != PPC_NOP_INSTR) {
 		printk("%s: Expect noop after relocate, got %08x\n",
 		       me->name, *instruction);
 		return 0;
@@ -466,65 +451,3 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 
 	return 0;
 }
-
-LIST_HEAD(module_bug_list);
-
-static const Elf_Shdr *find_section(const Elf_Ehdr *hdr,
-				    const Elf_Shdr *sechdrs,
-				    const char *name)
-{
-	char *secstrings;
-	unsigned int i;
-
-	secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
-	for (i = 1; i < hdr->e_shnum; i++)
-		if (strcmp(secstrings+sechdrs[i].sh_name, name) == 0)
-			return &sechdrs[i];
-	return NULL;
-}
-
-int module_finalize(const Elf_Ehdr *hdr,
-		const Elf_Shdr *sechdrs, struct module *me)
-{
-	const Elf_Shdr *sect;
-	int err;
-
-	err = module_bug_finalize(hdr, sechdrs, me);
-	if (err)
-		return err;
-
-	/* Apply feature fixups */
-	sect = find_section(hdr, sechdrs, "__ftr_fixup");
-	if (sect != NULL)
-		do_feature_fixups(cur_cpu_spec->cpu_features,
-				  (void *)sect->sh_addr,
-				  (void *)sect->sh_addr + sect->sh_size);
-
-	sect = find_section(hdr, sechdrs, "__fw_ftr_fixup");
-	if (sect != NULL)
-		do_feature_fixups(powerpc_firmware_features,
-				  (void *)sect->sh_addr,
-				  (void *)sect->sh_addr + sect->sh_size);
-
-	return 0;
-}
-
-void module_arch_cleanup(struct module *mod)
-{
-	module_bug_cleanup(mod);
-}
-
-struct bug_entry *module_find_bug(unsigned long bugaddr)
-{
-	struct mod_arch_specific *mod;
-	unsigned int i;
-	struct bug_entry *bug;
-
-	list_for_each_entry(mod, &module_bug_list, bug_list) {
-		bug = mod->bug_table;
-		for (i = 0; i < mod->num_bugs; ++i, ++bug)
-			if (bugaddr == bug->bug_addr)
-				return bug;
-	}
-	return NULL;
-}
diff --git a/arch/powerpc/kernel/msi.c b/arch/powerpc/kernel/msi.c
index c62d1012c013..3bb7d3dd28be 100644
--- a/arch/powerpc/kernel/msi.c
+++ b/arch/powerpc/kernel/msi.c
@@ -34,5 +34,5 @@ int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 
 void arch_teardown_msi_irqs(struct pci_dev *dev)
 {
-	return ppc_md.teardown_msi_irqs(dev);
+	ppc_md.teardown_msi_irqs(dev);
 }
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index 5748ddb47d9f..e9be908f199b 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -89,54 +89,6 @@ struct of_device *of_device_alloc(struct device_node *np,
 }
 EXPORT_SYMBOL(of_device_alloc);
 
-ssize_t of_device_get_modalias(struct of_device *ofdev,
-				char *str, ssize_t len)
-{
-	const char *compat;
-	int cplen, i;
-	ssize_t tsize, csize, repend;
-
-	/* Name & Type */
-	csize = snprintf(str, len, "of:N%sT%s",
-				ofdev->node->name, ofdev->node->type);
-
-	/* Get compatible property if any */
-	compat = of_get_property(ofdev->node, "compatible", &cplen);
-	if (!compat)
-		return csize;
-
-	/* Find true end (we tolerate multiple \0 at the end */
-	for (i=(cplen-1); i>=0 && !compat[i]; i--)
-		cplen--;
-	if (!cplen)
-		return csize;
-	cplen++;
-
-	/* Check space (need cplen+1 chars including final \0) */
-	tsize = csize + cplen;
-	repend = tsize;
-
-	if (csize>=len)		/* @ the limit, all is already filled */
-		return tsize;
-
-	if (tsize>=len) {		/* limit compat list */
-		cplen = len-csize-1;
-		repend = len;
-	}
-
-	/* Copy and do char replacement */
-	memcpy(&str[csize+1], compat, cplen);
-	for (i=csize; i<repend; i++) {
-		char c = str[i];
-		if (c=='\0')
-			str[i] = 'C';
-		else if (c==' ')
-			str[i] = '_';
-	}
-
-	return tsize;
-}
-
 int of_device_uevent(struct device *dev, struct kobj_uevent_env *env)
 {
 	struct of_device *ofdev;
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 063cdd413049..224e9a11765c 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -598,6 +598,7 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			res->start = pci_addr;
 			break;
 		case 2:		/* PCI Memory space */
+		case 3:		/* PCI 64 bits Memory space */
 			printk(KERN_INFO
 			       " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
 			       cpu_addr, cpu_addr + size - 1, pci_addr,
diff --git a/arch/powerpc/kernel/ppc32.h b/arch/powerpc/kernel/ppc32.h
index 90e562771791..dc16aefe1dd0 100644
--- a/arch/powerpc/kernel/ppc32.h
+++ b/arch/powerpc/kernel/ppc32.h
@@ -120,6 +120,7 @@ struct mcontext32 {
 	elf_fpregset_t		mc_fregs;
 	unsigned int		mc_pad[2];
 	elf_vrregset_t32	mc_vregs __attribute__((__aligned__(16)));
+	elf_vsrreghalf_t32      mc_vsregs __attribute__((__aligned__(16)));
 };
 
 struct ucontext32 { 
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index a8d02506468a..e1ea4fe5cfbd 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -107,6 +107,9 @@ EXPORT_SYMBOL(giveup_fpu);
 #ifdef CONFIG_ALTIVEC
 EXPORT_SYMBOL(giveup_altivec);
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+EXPORT_SYMBOL(giveup_vsx);
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 EXPORT_SYMBOL(giveup_spe);
 #endif /* CONFIG_SPE */
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 7de41c3948ec..957bded0020d 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -47,12 +47,15 @@
 #ifdef CONFIG_PPC64
 #include <asm/firmware.h>
 #endif
+#include <linux/kprobes.h>
+#include <linux/kdebug.h>
 
 extern unsigned long _get_SP(void);
 
 #ifndef CONFIG_SMP
 struct task_struct *last_task_used_math = NULL;
 struct task_struct *last_task_used_altivec = NULL;
+struct task_struct *last_task_used_vsx = NULL;
 struct task_struct *last_task_used_spe = NULL;
 #endif
 
@@ -104,17 +107,6 @@ void enable_kernel_fp(void)
 }
 EXPORT_SYMBOL(enable_kernel_fp);
 
-int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpregs)
-{
-	if (!tsk->thread.regs)
-		return 0;
-	flush_fp_to_thread(current);
-
-	memcpy(fpregs, &tsk->thread.fpr[0], sizeof(*fpregs));
-
-	return 1;
-}
-
 #ifdef CONFIG_ALTIVEC
 void enable_kernel_altivec(void)
 {
@@ -148,36 +140,48 @@ void flush_altivec_to_thread(struct task_struct *tsk)
 		preempt_enable();
 	}
 }
+#endif /* CONFIG_ALTIVEC */
 
-int dump_task_altivec(struct task_struct *tsk, elf_vrregset_t *vrregs)
+#ifdef CONFIG_VSX
+#if 0
+/* not currently used, but some crazy RAID module might want to later */
+void enable_kernel_vsx(void)
 {
-	/* ELF_NVRREG includes the VSCR and VRSAVE which we need to save
-	 * separately, see below */
-	const int nregs = ELF_NVRREG - 2;
-	elf_vrreg_t *reg;
-	u32 *dest;
-
-	if (tsk == current)
-		flush_altivec_to_thread(tsk);
-
-	reg = (elf_vrreg_t *)vrregs;
-
-	/* copy the 32 vr registers */
-	memcpy(reg, &tsk->thread.vr[0], nregs * sizeof(*reg));
-	reg += nregs;
+	WARN_ON(preemptible());
 
-	/* copy the vscr */
-	memcpy(reg, &tsk->thread.vscr, sizeof(*reg));
-	reg++;
+#ifdef CONFIG_SMP
+	if (current->thread.regs && (current->thread.regs->msr & MSR_VSX))
+		giveup_vsx(current);
+	else
+		giveup_vsx(NULL);	/* just enable vsx for kernel - force */
+#else
+	giveup_vsx(last_task_used_vsx);
+#endif /* CONFIG_SMP */
+}
+EXPORT_SYMBOL(enable_kernel_vsx);
+#endif
 
-	/* vrsave is stored in the high 32bit slot of the final 128bits */
-	memset(reg, 0, sizeof(*reg));
-	dest = (u32 *)reg;
-	*dest = tsk->thread.vrsave;
+void giveup_vsx(struct task_struct *tsk)
+{
+	giveup_fpu(tsk);
+	giveup_altivec(tsk);
+	__giveup_vsx(tsk);
+}
 
-	return 1;
+void flush_vsx_to_thread(struct task_struct *tsk)
+{
+	if (tsk->thread.regs) {
+		preempt_disable();
+		if (tsk->thread.regs->msr & MSR_VSX) {
+#ifdef CONFIG_SMP
+			BUG_ON(tsk != current);
+#endif
+			giveup_vsx(tsk);
+		}
+		preempt_enable();
+	}
 }
-#endif /* CONFIG_ALTIVEC */
+#endif /* CONFIG_VSX */
 
 #ifdef CONFIG_SPE
 
@@ -209,14 +213,6 @@ void flush_spe_to_thread(struct task_struct *tsk)
 		preempt_enable();
 	}
 }
-
-int dump_spe(struct pt_regs *regs, elf_vrregset_t *evrregs)
-{
-	flush_spe_to_thread(current);
-	/* We copy u32 evr[32] + u64 acc + u32 spefscr -> 35 */
-	memcpy(evrregs, &current->thread.evr[0], sizeof(u32) * 35);
-	return 1;
-}
 #endif /* CONFIG_SPE */
 
 #ifndef CONFIG_SMP
@@ -233,6 +229,10 @@ void discard_lazy_cpu_state(void)
 	if (last_task_used_altivec == current)
 		last_task_used_altivec = NULL;
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	if (last_task_used_vsx == current)
+		last_task_used_vsx = NULL;
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 	if (last_task_used_spe == current)
 		last_task_used_spe = NULL;
@@ -241,21 +241,53 @@ void discard_lazy_cpu_state(void)
 }
 #endif /* CONFIG_SMP */
 
+void do_dabr(struct pt_regs *regs, unsigned long address,
+		    unsigned long error_code)
+{
+	siginfo_t info;
+
+	if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
+			11, SIGSEGV) == NOTIFY_STOP)
+		return;
+
+	if (debugger_dabr_match(regs))
+		return;
+
+	/* Clear the DAC and struct entries.  One shot trigger */
+#if defined(CONFIG_BOOKE)
+	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W
+							| DBCR0_IDM));
+#endif
+
+	/* Clear the DABR */
+	set_dabr(0);
+
+	/* Deliver the signal to userspace */
+	info.si_signo = SIGTRAP;
+	info.si_errno = 0;
+	info.si_code = TRAP_HWBKPT;
+	info.si_addr = (void __user *)address;
+	force_sig_info(SIGTRAP, &info, current);
+}
+
 static DEFINE_PER_CPU(unsigned long, current_dabr);
 
 int set_dabr(unsigned long dabr)
 {
 	__get_cpu_var(current_dabr) = dabr;
 
-#ifdef CONFIG_PPC_MERGE		/* XXX for now */
 	if (ppc_md.set_dabr)
 		return ppc_md.set_dabr(dabr);
-#endif
 
 	/* XXX should we have a CPU_FTR_HAS_DABR ? */
 #if defined(CONFIG_PPC64) || defined(CONFIG_6xx)
 	mtspr(SPRN_DABR, dabr);
 #endif
+
+#if defined(CONFIG_BOOKE)
+	mtspr(SPRN_DAC1, dabr);
+#endif
+
 	return 0;
 }
 
@@ -297,6 +329,11 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	if (prev->thread.regs && (prev->thread.regs->msr & MSR_VEC))
 		giveup_altivec(prev);
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	if (prev->thread.regs && (prev->thread.regs->msr & MSR_VSX))
+		/* VMX and FPU registers are already save here */
+		__giveup_vsx(prev);
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 	/*
 	 * If the previous thread used spe in the last quantum
@@ -317,6 +354,10 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	if (new->thread.regs && last_task_used_altivec == new)
 		new->thread.regs->msr |= MSR_VEC;
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	if (new->thread.regs && last_task_used_vsx == new)
+		new->thread.regs->msr |= MSR_VSX;
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 	/* Avoid the trap.  On smp this this never happens since
 	 * we don't set last_task_used_spe
@@ -330,6 +371,12 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr))
 		set_dabr(new->thread.dabr);
 
+#if defined(CONFIG_BOOKE)
+	/* If new thread DAC (HW breakpoint) is the same then leave it */
+	if (new->thread.dabr)
+		set_dabr(new->thread.dabr);
+#endif
+
 	new_thread = &new->thread;
 	old_thread = &current->thread;
 
@@ -417,6 +464,8 @@ static struct regbit {
 	{MSR_EE,	"EE"},
 	{MSR_PR,	"PR"},
 	{MSR_FP,	"FP"},
+	{MSR_VEC,	"VEC"},
+	{MSR_VSX,	"VSX"},
 	{MSR_ME,	"ME"},
 	{MSR_IR,	"IR"},
 	{MSR_DR,	"DR"},
@@ -484,10 +533,8 @@ void show_regs(struct pt_regs * regs)
 	 * Lookup NIP late so we have the best change of getting the
 	 * above info out without failing
 	 */
-	printk("NIP ["REG"] ", regs->nip);
-	print_symbol("%s\n", regs->nip);
-	printk("LR ["REG"] ", regs->link);
-	print_symbol("%s\n", regs->link);
+	printk("NIP ["REG"] %pS\n", regs->nip, (void *)regs->nip);
+	printk("LR ["REG"] %pS\n", regs->link, (void *)regs->link);
 #endif
 	show_stack(current, (unsigned long *) regs->gpr[1]);
 	if (!user_mode(regs))
@@ -518,6 +565,10 @@ void flush_thread(void)
 	if (current->thread.dabr) {
 		current->thread.dabr = 0;
 		set_dabr(0);
+
+#if defined(CONFIG_BOOKE)
+		current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W);
+#endif
 	}
 }
 
@@ -534,6 +585,7 @@ void prepare_to_copy(struct task_struct *tsk)
 {
 	flush_fp_to_thread(current);
 	flush_altivec_to_thread(current);
+	flush_vsx_to_thread(current);
 	flush_spe_to_thread(current);
 }
 
@@ -689,6 +741,9 @@ void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp)
 #endif
 
 	discard_lazy_cpu_state();
+#ifdef CONFIG_VSX
+	current->thread.used_vsr = 0;
+#endif
 	memset(current->thread.fpr, 0, sizeof(current->thread.fpr));
 	current->thread.fpscr.val = 0;
 #ifdef CONFIG_ALTIVEC
@@ -971,8 +1026,7 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 		newsp = stack[0];
 		ip = stack[STACK_FRAME_LR_SAVE];
 		if (!firstframe || ip != lr) {
-			printk("["REG"] ["REG"] ", sp, ip);
-			print_symbol("%s", ip);
+			printk("["REG"] ["REG"] %pS", sp, ip, (void *)ip);
 			if (firstframe)
 				printk(" (unreliable)");
 			printk("\n");
@@ -987,10 +1041,9 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
 		    && stack[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) {
 			struct pt_regs *regs = (struct pt_regs *)
 				(sp + STACK_FRAME_OVERHEAD);
-			printk("--- Exception: %lx", regs->trap);
-			print_symbol(" at %s\n", regs->nip);
 			lr = regs->link;
-			print_symbol("    LR = %s\n", lr);
+			printk("--- Exception: %lx at %pS\n    LR = %pS\n",
+			       regs->trap, (void *)regs->nip, (void *)lr);
 			firstframe = 1;
 		}
 
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 2aefe2a4129a..87d83c56b31e 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -609,6 +609,10 @@ static struct feature_property {
 	{"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
 	{"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
 #endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	/* Yes, this _really_ is ibm,vmx == 2 to enable VSX */
+	{"ibm,vmx", 2, CPU_FTR_VSX, PPC_FEATURE_HAS_VSX},
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_PPC64
 	{"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP},
 	{"ibm,purr", 1, CPU_FTR_PURR, 0},
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 6d6df1e60325..b72849ac7db3 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -205,8 +205,6 @@ static int __initdata mem_reserve_cnt;
 static cell_t __initdata regbuf[1024];
 
 
-#define MAX_CPU_THREADS 2
-
 /*
  * Error results ... some OF calls will return "-1" on error, some
  * will return 0, some will return either. To simplify, here are
@@ -620,6 +618,7 @@ static void __init early_cmdline_parse(void)
 #define OV1_PPC_2_03		0x10	/* set if we support PowerPC 2.03 */
 #define OV1_PPC_2_04		0x08	/* set if we support PowerPC 2.04 */
 #define OV1_PPC_2_05		0x04	/* set if we support PowerPC 2.05 */
+#define OV1_PPC_2_06		0x02	/* set if we support PowerPC 2.06 */
 
 /* Option vector 2: Open Firmware options supported */
 #define OV2_REAL_MODE		0x20	/* set if we want OF in real mode */
@@ -642,6 +641,11 @@ static void __init early_cmdline_parse(void)
 #else
 #define OV5_MSI			0x00
 #endif /* CONFIG_PCI_MSI */
+#ifdef CONFIG_PPC_SMLPAR
+#define OV5_CMO			0x80	/* Cooperative Memory Overcommitment */
+#else
+#define OV5_CMO			0x00
+#endif
 
 /*
  * The architecture vector has an array of PVR mask/value pairs,
@@ -650,6 +654,8 @@ static void __init early_cmdline_parse(void)
 static unsigned char ibm_architecture_vec[] = {
 	W(0xfffe0000), W(0x003a0000),	/* POWER5/POWER5+ */
 	W(0xffff0000), W(0x003e0000),	/* POWER6 */
+	W(0xffff0000), W(0x003f0000),	/* POWER7 */
+	W(0xffffffff), W(0x0f000003),	/* all 2.06-compliant */
 	W(0xffffffff), W(0x0f000002),	/* all 2.05-compliant */
 	W(0xfffffffe), W(0x0f000001),	/* all 2.04-compliant and earlier */
 	5 - 1,				/* 5 option vectors */
@@ -658,7 +664,7 @@ static unsigned char ibm_architecture_vec[] = {
 	3 - 2,				/* length */
 	0,				/* don't ignore, don't halt */
 	OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 |
-	OV1_PPC_2_04 | OV1_PPC_2_05,
+	OV1_PPC_2_04 | OV1_PPC_2_05 | OV1_PPC_2_06,
 
 	/* option vector 2: Open Firmware options supported */
 	34 - 2,				/* length */
@@ -684,10 +690,12 @@ static unsigned char ibm_architecture_vec[] = {
 	0,				/* don't halt */
 
 	/* option vector 5: PAPR/OF options */
-	3 - 2,				/* length */
+	5 - 2,				/* length */
 	0,				/* don't ignore, don't halt */
 	OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY |
 	OV5_DONATE_DEDICATE_CPU | OV5_MSI,
+	0,
+	OV5_CMO,
 };
 
 /* Old method - ELF header with PT_NOTE sections */
@@ -1329,10 +1337,6 @@ static void __init prom_hold_cpus(void)
 	unsigned int reg;
 	phandle node;
 	char type[64];
-	int cpuid = 0;
-	unsigned int interrupt_server[MAX_CPU_THREADS];
-	unsigned int cpu_threads, hw_cpu_num;
-	int propsize;
 	struct prom_t *_prom = &RELOC(prom);
 	unsigned long *spinloop
 		= (void *) LOW_ADDR(__secondary_hold_spinloop);
@@ -1376,7 +1380,6 @@ static void __init prom_hold_cpus(void)
 		reg = -1;
 		prom_getprop(node, "reg", &reg, sizeof(reg));
 
-		prom_debug("\ncpuid        = 0x%x\n", cpuid);
 		prom_debug("cpu hw idx   = 0x%x\n", reg);
 
 		/* Init the acknowledge var which will be reset by
@@ -1385,28 +1388,9 @@ static void __init prom_hold_cpus(void)
 		 */
 		*acknowledge = (unsigned long)-1;
 
-		propsize = prom_getprop(node, "ibm,ppc-interrupt-server#s",
-					&interrupt_server,
-					sizeof(interrupt_server));
-		if (propsize < 0) {
-			/* no property.  old hardware has no SMT */
-			cpu_threads = 1;
-			interrupt_server[0] = reg; /* fake it with phys id */
-		} else {
-			/* We have a threaded processor */
-			cpu_threads = propsize / sizeof(u32);
-			if (cpu_threads > MAX_CPU_THREADS) {
-				prom_printf("SMT: too many threads!\n"
-					    "SMT: found %x, max is %x\n",
-					    cpu_threads, MAX_CPU_THREADS);
-				cpu_threads = 1; /* ToDo: panic? */
-			}
-		}
-
-		hw_cpu_num = interrupt_server[0];
-		if (hw_cpu_num != _prom->cpu) {
+		if (reg != _prom->cpu) {
 			/* Primary Thread of non-boot cpu */
-			prom_printf("%x : starting cpu hw idx %x... ", cpuid, reg);
+			prom_printf("starting cpu hw idx %x... ", reg);
 			call_prom("start-cpu", 3, 0, node,
 				  secondary_hold, reg);
 
@@ -1421,17 +1405,10 @@ static void __init prom_hold_cpus(void)
 		}
 #ifdef CONFIG_SMP
 		else
-			prom_printf("%x : boot cpu     %x\n", cpuid, reg);
+			prom_printf("boot cpu hw idx %x\n", reg);
 #endif /* CONFIG_SMP */
-
-		/* Reserve cpu #s for secondary threads.   They start later. */
-		cpuid += cpu_threads;
 	}
 
-	if (cpuid > NR_CPUS)
-		prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS)
-			    ") exceeded: ignoring extras\n");
-
 	prom_debug("prom_hold_cpus: end...\n");
 }
 
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 90eb3a3e383e..bc1fb27368af 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -128,12 +128,35 @@ static void of_bus_pci_count_cells(struct device_node *np,
 		*sizec = 2;
 }
 
+static unsigned int of_bus_pci_get_flags(const u32 *addr)
+{
+	unsigned int flags = 0;
+	u32 w = addr[0];
+
+	switch((w >> 24) & 0x03) {
+	case 0x01:
+		flags |= IORESOURCE_IO;
+		break;
+	case 0x02: /* 32 bits */
+	case 0x03: /* 64 bits */
+		flags |= IORESOURCE_MEM;
+		break;
+	}
+	if (w & 0x40000000)
+		flags |= IORESOURCE_PREFETCH;
+	return flags;
+}
+
 static u64 of_bus_pci_map(u32 *addr, const u32 *range, int na, int ns, int pna)
 {
 	u64 cp, s, da;
+	unsigned int af, rf;
+
+	af = of_bus_pci_get_flags(addr);
+	rf = of_bus_pci_get_flags(range);
 
 	/* Check address type match */
-	if ((addr[0] ^ range[0]) & 0x03000000)
+	if ((af ^ rf) & (IORESOURCE_MEM | IORESOURCE_IO))
 		return OF_BAD_ADDR;
 
 	/* Read address values, skipping high cell */
@@ -153,25 +176,6 @@ static int of_bus_pci_translate(u32 *addr, u64 offset, int na)
 	return of_bus_default_translate(addr + 1, offset, na - 1);
 }
 
-static unsigned int of_bus_pci_get_flags(const u32 *addr)
-{
-	unsigned int flags = 0;
-	u32 w = addr[0];
-
-	switch((w >> 24) & 0x03) {
-	case 0x01:
-		flags |= IORESOURCE_IO;
-		break;
-	case 0x02: /* 32 bits */
-	case 0x03: /* 64 bits */
-		flags |= IORESOURCE_MEM;
-		break;
-	}
-	if (w & 0x40000000)
-		flags |= IORESOURCE_PREFETCH;
-	return flags;
-}
-
 const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size,
 			unsigned int *flags)
 {
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 2a9fe97e4521..3635be61f899 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -22,6 +22,7 @@
 #include <linux/errno.h>
 #include <linux/ptrace.h>
 #include <linux/regset.h>
+#include <linux/tracehook.h>
 #include <linux/elf.h>
 #include <linux/user.h>
 #include <linux/security.h>
@@ -215,29 +216,56 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset,
 		   unsigned int pos, unsigned int count,
 		   void *kbuf, void __user *ubuf)
 {
+#ifdef CONFIG_VSX
+	double buf[33];
+	int i;
+#endif
 	flush_fp_to_thread(target);
 
+#ifdef CONFIG_VSX
+	/* copy to local buffer then write that out */
+	for (i = 0; i < 32 ; i++)
+		buf[i] = target->thread.TS_FPR(i);
+	memcpy(&buf[32], &target->thread.fpscr, sizeof(double));
+	return user_regset_copyout(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
+
+#else
 	BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) !=
-		     offsetof(struct thread_struct, fpr[32]));
+		     offsetof(struct thread_struct, TS_FPR(32)));
 
 	return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
 				   &target->thread.fpr, 0, -1);
+#endif
 }
 
 static int fpr_set(struct task_struct *target, const struct user_regset *regset,
 		   unsigned int pos, unsigned int count,
 		   const void *kbuf, const void __user *ubuf)
 {
+#ifdef CONFIG_VSX
+	double buf[33];
+	int i;
+#endif
 	flush_fp_to_thread(target);
 
+#ifdef CONFIG_VSX
+	/* copy to local buffer then write that out */
+	i = user_regset_copyin(&pos, &count, &kbuf, &ubuf, buf, 0, -1);
+	if (i)
+		return i;
+	for (i = 0; i < 32 ; i++)
+		target->thread.TS_FPR(i) = buf[i];
+	memcpy(&target->thread.fpscr, &buf[32], sizeof(double));
+	return 0;
+#else
 	BUILD_BUG_ON(offsetof(struct thread_struct, fpscr) !=
-		     offsetof(struct thread_struct, fpr[32]));
+		     offsetof(struct thread_struct, TS_FPR(32)));
 
 	return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
 				  &target->thread.fpr, 0, -1);
+#endif
 }
 
-
 #ifdef CONFIG_ALTIVEC
 /*
  * Get/set all the altivec registers vr0..vr31, vscr, vrsave, in one go.
@@ -323,6 +351,56 @@ static int vr_set(struct task_struct *target, const struct user_regset *regset,
 }
 #endif /* CONFIG_ALTIVEC */
 
+#ifdef CONFIG_VSX
+/*
+ * Currently to set and and get all the vsx state, you need to call
+ * the fp and VMX calls aswell.  This only get/sets the lower 32
+ * 128bit VSX registers.
+ */
+
+static int vsr_active(struct task_struct *target,
+		      const struct user_regset *regset)
+{
+	flush_vsx_to_thread(target);
+	return target->thread.used_vsr ? regset->n : 0;
+}
+
+static int vsr_get(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   void *kbuf, void __user *ubuf)
+{
+	double buf[32];
+	int ret, i;
+
+	flush_vsx_to_thread(target);
+
+	for (i = 0; i < 32 ; i++)
+		buf[i] = target->thread.fpr[i][TS_VSRLOWOFFSET];
+	ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+				  buf, 0, 32 * sizeof(double));
+
+	return ret;
+}
+
+static int vsr_set(struct task_struct *target, const struct user_regset *regset,
+		   unsigned int pos, unsigned int count,
+		   const void *kbuf, const void __user *ubuf)
+{
+	double buf[32];
+	int ret,i;
+
+	flush_vsx_to_thread(target);
+
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
+				 buf, 0, 32 * sizeof(double));
+	for (i = 0; i < 32 ; i++)
+		target->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+
+
+	return ret;
+}
+#endif /* CONFIG_VSX */
+
 #ifdef CONFIG_SPE
 
 /*
@@ -399,6 +477,9 @@ enum powerpc_regset {
 #ifdef CONFIG_ALTIVEC
 	REGSET_VMX,
 #endif
+#ifdef CONFIG_VSX
+	REGSET_VSX,
+#endif
 #ifdef CONFIG_SPE
 	REGSET_SPE,
 #endif
@@ -422,6 +503,13 @@ static const struct user_regset native_regsets[] = {
 		.active = vr_active, .get = vr_get, .set = vr_set
 	},
 #endif
+#ifdef CONFIG_VSX
+	[REGSET_VSX] = {
+		.core_note_type = NT_PPC_VSX, .n = 32,
+		.size = sizeof(double), .align = sizeof(double),
+		.active = vsr_active, .get = vsr_get, .set = vsr_set
+	},
+#endif
 #ifdef CONFIG_SPE
 	[REGSET_SPE] = {
 		.n = 35,
@@ -616,7 +704,7 @@ void user_enable_single_step(struct task_struct *task)
 
 	if (regs != NULL) {
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-		task->thread.dbcr0 = DBCR0_IDM | DBCR0_IC;
+		task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC;
 		regs->msr |= MSR_DE;
 #else
 		regs->msr |= MSR_SE;
@@ -629,9 +717,16 @@ void user_disable_single_step(struct task_struct *task)
 {
 	struct pt_regs *regs = task->thread.regs;
 
+
+#if defined(CONFIG_BOOKE)
+	/* If DAC then do not single step, skip */
+	if (task->thread.dabr)
+		return;
+#endif
+
 	if (regs != NULL) {
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-		task->thread.dbcr0 = 0;
+		task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_IDM);
 		regs->msr &= ~MSR_DE;
 #else
 		regs->msr &= ~MSR_SE;
@@ -640,22 +735,76 @@ void user_disable_single_step(struct task_struct *task)
 	clear_tsk_thread_flag(task, TIF_SINGLESTEP);
 }
 
-static int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
+int ptrace_set_debugreg(struct task_struct *task, unsigned long addr,
 			       unsigned long data)
 {
-	/* We only support one DABR and no IABRS at the moment */
+	/* For ppc64 we support one DABR and no IABR's at the moment (ppc64).
+	 *  For embedded processors we support one DAC and no IAC's at the
+	 *  moment.
+	 */
 	if (addr > 0)
 		return -EINVAL;
 
-	/* The bottom 3 bits are flags */
+	/* The bottom 3 bits in dabr are flags */
 	if ((data & ~0x7UL) >= TASK_SIZE)
 		return -EIO;
 
-	/* Ensure translation is on */
+#ifndef CONFIG_BOOKE
+
+	/* For processors using DABR (i.e. 970), the bottom 3 bits are flags.
+	 *  It was assumed, on previous implementations, that 3 bits were
+	 *  passed together with the data address, fitting the design of the
+	 *  DABR register, as follows:
+	 *
+	 *  bit 0: Read flag
+	 *  bit 1: Write flag
+	 *  bit 2: Breakpoint translation
+	 *
+	 *  Thus, we use them here as so.
+	 */
+
+	/* Ensure breakpoint translation bit is set */
 	if (data && !(data & DABR_TRANSLATION))
 		return -EIO;
 
+	/* Move contents to the DABR register */
 	task->thread.dabr = data;
+
+#endif
+#if defined(CONFIG_BOOKE)
+
+	/* As described above, it was assumed 3 bits were passed with the data
+	 *  address, but we will assume only the mode bits will be passed
+	 *  as to not cause alignment restrictions for DAC-based processors.
+	 */
+
+	/* DAC's hold the whole address without any mode flags */
+	task->thread.dabr = data & ~0x3UL;
+
+	if (task->thread.dabr == 0) {
+		task->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM);
+		task->thread.regs->msr &= ~MSR_DE;
+		return 0;
+	}
+
+	/* Read or Write bits must be set */
+
+	if (!(data & 0x3UL))
+		return -EINVAL;
+
+	/* Set the Internal Debugging flag (IDM bit 1) for the DBCR0
+	   register */
+	task->thread.dbcr0 = DBCR0_IDM;
+
+	/* Check for write and read flags and set DBCR0
+	   accordingly */
+	if (data & 0x1UL)
+		task->thread.dbcr0 |= DBSR_DAC1R;
+	if (data & 0x2UL)
+		task->thread.dbcr0 |= DBSR_DAC1W;
+
+	task->thread.regs->msr |= MSR_DE;
+#endif
 	return 0;
 }
 
@@ -728,7 +877,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			tmp = ptrace_get_reg(child, (int) index);
 		} else {
 			flush_fp_to_thread(child);
-			tmp = ((unsigned long *)child->thread.fpr)[index - PT_FPR0];
+			tmp = ((unsigned long *)child->thread.fpr)
+				[TS_FPRWIDTH * (index - PT_FPR0)];
 		}
 		ret = put_user(tmp,(unsigned long __user *) data);
 		break;
@@ -755,7 +905,8 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			ret = ptrace_put_reg(child, index, data);
 		} else {
 			flush_fp_to_thread(child);
-			((unsigned long *)child->thread.fpr)[index - PT_FPR0] = data;
+			((unsigned long *)child->thread.fpr)
+				[TS_FPRWIDTH * (index - PT_FPR0)] = data;
 			ret = 0;
 		}
 		break;
@@ -820,6 +971,19 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 						 sizeof(u32)),
 					     (const void __user *) data);
 #endif
+#ifdef CONFIG_VSX
+	case PTRACE_GETVSRREGS:
+		return copy_regset_to_user(child, &user_ppc_native_view,
+					   REGSET_VSX,
+					   0, 32 * sizeof(double),
+					   (void __user *) data);
+
+	case PTRACE_SETVSRREGS:
+		return copy_regset_from_user(child, &user_ppc_native_view,
+					     REGSET_VSX,
+					     0, 32 * sizeof(double),
+					     (const void __user *) data);
+#endif
 #ifdef CONFIG_SPE
 	case PTRACE_GETEVRREGS:
 		/* Get the child spe register state. */
@@ -849,31 +1013,24 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-static void do_syscall_trace(void)
+/*
+ * We must return the syscall number to actually look up in the table.
+ * This can be -1L to skip running any syscall at all.
+ */
+long do_syscall_trace_enter(struct pt_regs *regs)
 {
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
+	long ret = 0;
 
-void do_syscall_trace_enter(struct pt_regs *regs)
-{
 	secure_computing(regs->gpr[0]);
 
-	if (test_thread_flag(TIF_SYSCALL_TRACE)
-	    && (current->ptrace & PT_PTRACED))
-		do_syscall_trace();
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->gpr[0].
+		 */
+		ret = -1L;
 
 	if (unlikely(current->audit_context)) {
 #ifdef CONFIG_PPC64
@@ -891,16 +1048,19 @@ void do_syscall_trace_enter(struct pt_regs *regs)
 					    regs->gpr[5] & 0xffffffff,
 					    regs->gpr[6] & 0xffffffff);
 	}
+
+	return ret ?: regs->gpr[0];
 }
 
 void do_syscall_trace_leave(struct pt_regs *regs)
 {
+	int step;
+
 	if (unlikely(current->audit_context))
 		audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS,
 				   regs->result);
 
-	if ((test_thread_flag(TIF_SYSCALL_TRACE)
-	     || test_thread_flag(TIF_SINGLESTEP))
-	    && (current->ptrace & PT_PTRACED))
-		do_syscall_trace();
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
 }
diff --git a/arch/powerpc/kernel/ptrace32.c b/arch/powerpc/kernel/ptrace32.c
index 4c1de6af4c09..197d49c790ad 100644
--- a/arch/powerpc/kernel/ptrace32.c
+++ b/arch/powerpc/kernel/ptrace32.c
@@ -64,6 +64,11 @@ static long compat_ptrace_old(struct task_struct *child, long request,
 	return -EPERM;
 }
 
+/* Macros to workout the correct index for the FPR in the thread struct */
+#define FPRNUMBER(i) (((i) - PT_FPR0) >> 1)
+#define FPRHALF(i) (((i) - PT_FPR0) & 1)
+#define FPRINDEX(i) TS_FPRWIDTH * FPRNUMBER(i) + FPRHALF(i)
+
 long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			compat_ulong_t caddr, compat_ulong_t cdata)
 {
@@ -122,7 +127,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			 * to be an array of unsigned int (32 bits) - the
 			 * index passed in is based on this assumption.
 			 */
-			tmp = ((unsigned int *)child->thread.fpr)[index - PT_FPR0];
+			tmp = ((unsigned int *)child->thread.fpr)
+				[FPRINDEX(index)];
 		}
 		ret = put_user((unsigned int)tmp, (u32 __user *)data);
 		break;
@@ -162,7 +168,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 		CHECK_FULL_REGS(child->thread.regs);
 		if (numReg >= PT_FPR0) {
 			flush_fp_to_thread(child);
-			tmp = ((unsigned long int *)child->thread.fpr)[numReg - PT_FPR0];
+			tmp = ((unsigned long int *)child->thread.fpr)
+				[FPRINDEX(numReg)];
 		} else { /* register within PT_REGS struct */
 			tmp = ptrace_get_reg(child, numReg);
 		} 
@@ -217,7 +224,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 			 * to be an array of unsigned int (32 bits) - the
 			 * index passed in is based on this assumption.
 			 */
-			((unsigned int *)child->thread.fpr)[index - PT_FPR0] = data;
+			((unsigned int *)child->thread.fpr)
+				[FPRINDEX(index)] = data;
 			ret = 0;
 		}
 		break;
@@ -286,6 +294,8 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 	case PTRACE_SETFPREGS:
 	case PTRACE_GETVRREGS:
 	case PTRACE_SETVRREGS:
+	case PTRACE_GETVSRREGS:
+	case PTRACE_SETVSRREGS:
 	case PTRACE_GETREGS64:
 	case PTRACE_SETREGS64:
 	case PPC_PTRACE_GETFPREGS:
diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c
index f9c6abc84a94..1be9fe38bcb5 100644
--- a/arch/powerpc/kernel/rtas-proc.c
+++ b/arch/powerpc/kernel/rtas-proc.c
@@ -160,7 +160,7 @@ static int sensors_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_sensors_show, NULL);
 }
 
-const struct file_operations ppc_rtas_sensors_operations = {
+static const struct file_operations ppc_rtas_sensors_operations = {
 	.open		= sensors_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -172,7 +172,7 @@ static int poweron_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_poweron_show, NULL);
 }
 
-const struct file_operations ppc_rtas_poweron_operations = {
+static const struct file_operations ppc_rtas_poweron_operations = {
 	.open		= poweron_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -185,7 +185,7 @@ static int progress_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_progress_show, NULL);
 }
 
-const struct file_operations ppc_rtas_progress_operations = {
+static const struct file_operations ppc_rtas_progress_operations = {
 	.open		= progress_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -198,7 +198,7 @@ static int clock_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_clock_show, NULL);
 }
 
-const struct file_operations ppc_rtas_clock_operations = {
+static const struct file_operations ppc_rtas_clock_operations = {
 	.open		= clock_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -211,7 +211,7 @@ static int tone_freq_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_tone_freq_show, NULL);
 }
 
-const struct file_operations ppc_rtas_tone_freq_operations = {
+static const struct file_operations ppc_rtas_tone_freq_operations = {
 	.open		= tone_freq_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -224,7 +224,7 @@ static int tone_volume_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_tone_volume_show, NULL);
 }
 
-const struct file_operations ppc_rtas_tone_volume_operations = {
+static const struct file_operations ppc_rtas_tone_volume_operations = {
 	.open		= tone_volume_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -237,7 +237,7 @@ static int rmo_buf_open(struct inode *inode, struct file *file)
 	return single_open(file, ppc_rtas_rmo_buf_show, NULL);
 }
 
-const struct file_operations ppc_rtas_rmo_buf_ops = {
+static const struct file_operations ppc_rtas_rmo_buf_ops = {
 	.open		= rmo_buf_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 34843c318419..c680f1bbd387 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -340,8 +340,8 @@ int rtas_get_error_log_max(void)
 EXPORT_SYMBOL(rtas_get_error_log_max);
 
 
-char rtas_err_buf[RTAS_ERROR_LOG_MAX];
-int rtas_last_error_token;
+static char rtas_err_buf[RTAS_ERROR_LOG_MAX];
+static int rtas_last_error_token;
 
 /** Return a copy of the detailed error text associated with the
  *  most recent failed call to rtas.  Because the error text
@@ -484,7 +484,7 @@ unsigned int rtas_busy_delay(int status)
 }
 EXPORT_SYMBOL(rtas_busy_delay);
 
-int rtas_error_rc(int rtas_rc)
+static int rtas_error_rc(int rtas_rc)
 {
 	int rc;
 
@@ -747,7 +747,7 @@ static int rtas_ibm_suspend_me(struct rtas_args *args)
 	/* Call function on all CPUs.  One of us will make the
 	 * rtas call
 	 */
-	if (on_each_cpu(rtas_percpu_suspend_me, &data, 1, 0))
+	if (on_each_cpu(rtas_percpu_suspend_me, &data, 0))
 		data.error = -EINVAL;
 
 	wait_for_completion(&done);
diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c
index 0a5e22b22729..149cb112cd1a 100644
--- a/arch/powerpc/kernel/rtas_flash.c
+++ b/arch/powerpc/kernel/rtas_flash.c
@@ -286,7 +286,7 @@ static ssize_t rtas_flash_read(struct file *file, char __user *buf,
 }
 
 /* constructor for flash_block_cache */
-void rtas_block_ctor(struct kmem_cache *cache, void *ptr)
+void rtas_block_ctor(void *ptr)
 {
 	memset(ptr, 0, RTAS_BLK_SIZE);
 }
@@ -731,7 +731,7 @@ static const struct file_operations validate_flash_operations = {
 	.release	= validate_flash_release,
 };
 
-int __init rtas_flash_init(void)
+static int __init rtas_flash_init(void)
 {
 	int rc;
 
@@ -817,7 +817,7 @@ cleanup:
 	return rc;
 }
 
-void __exit rtas_flash_cleanup(void)
+static void __exit rtas_flash_cleanup(void)
 {
 	rtas_flash_term_hook = NULL;
 
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 3ab88a9dc70d..589a2797eac2 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -155,12 +155,12 @@ static int rtas_pci_write_config(struct pci_bus *bus,
 	return PCIBIOS_DEVICE_NOT_FOUND;
 }
 
-struct pci_ops rtas_pci_ops = {
+static struct pci_ops rtas_pci_ops = {
 	.read = rtas_pci_read_config,
 	.write = rtas_pci_write_config,
 };
 
-int is_python(struct device_node *dev)
+static int is_python(struct device_node *dev)
 {
 	const char *model = of_get_property(dev, "model", NULL);
 
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index db540eab09f4..9cc5a52711e5 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -367,7 +367,6 @@ static void __init cpu_init_thread_core_maps(int tpc)
  * setup_cpu_maps - initialize the following cpu maps:
  *                  cpu_possible_map
  *                  cpu_present_map
- *                  cpu_sibling_map
  *
  * Having the possible map set up early allows us to restrict allocations
  * of things like irqstacks to num_possible_cpus() rather than NR_CPUS.
@@ -475,31 +474,9 @@ void __init smp_setup_cpu_maps(void)
 	 */
 	cpu_init_thread_core_maps(nthreads);
 }
-
-/*
- * Being that cpu_sibling_map is now a per_cpu array, then it cannot
- * be initialized until the per_cpu areas have been created.  This
- * function is now called from setup_per_cpu_areas().
- */
-void __init smp_setup_cpu_sibling_map(void)
-{
-#ifdef CONFIG_PPC64
-	int i, cpu, base;
-
-	for_each_possible_cpu(cpu) {
-		DBG("Sibling map for CPU %d:", cpu);
-		base = cpu_first_thread_in_core(cpu);
-		for (i = 0; i < threads_per_core; i++) {
-			cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
-			DBG(" %d", base + i);
-		}
-		DBG("\n");
-	}
-
-#endif /* CONFIG_PPC64 */
-}
 #endif /* CONFIG_SMP */
 
+#ifdef CONFIG_PCSPKR_PLATFORM
 static __init int add_pcspkr(void)
 {
 	struct device_node *np;
@@ -522,6 +499,7 @@ static __init int add_pcspkr(void)
 	return ret;
 }
 device_initcall(add_pcspkr);
+#endif	/* CONFIG_PCSPKR_PLATFORM */
 
 void probe_machine(void)
 {
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index 19e8fcb9cea8..066e65c59b58 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -43,10 +43,6 @@
 
 #define DBG(fmt...)
 
-#if defined CONFIG_KGDB
-#include <asm/kgdb.h>
-#endif
-
 extern void bootx_init(unsigned long r4, unsigned long phys);
 
 int boot_cpuid;
@@ -101,6 +97,10 @@ notrace unsigned long __init early_init(unsigned long dt_ptr)
 			  PTRRELOC(&__start___ftr_fixup),
 			  PTRRELOC(&__stop___ftr_fixup));
 
+	do_lwsync_fixups(spec->cpu_features,
+			 PTRRELOC(&__start___lwsync_fixup),
+			 PTRRELOC(&__stop___lwsync_fixup));
+
 	return KERNELBASE + offset;
 }
 
@@ -127,6 +127,11 @@ notrace void __init machine_init(unsigned long dt_ptr, unsigned long phys)
 		ppc_md.power_save = ppc6xx_idle;
 #endif
 
+#ifdef CONFIG_E500
+	if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
+	    cpu_has_feature(CPU_FTR_CAN_NAP))
+		ppc_md.power_save = e500_idle;
+#endif
 	if (ppc_md.progress)
 		ppc_md.progress("id mach(): done", 0x200);
 }
@@ -248,6 +253,28 @@ static void __init irqstack_early_init(void)
 #define irqstack_early_init()
 #endif
 
+#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
+static void __init exc_lvl_early_init(void)
+{
+	unsigned int i;
+
+	/* interrupt stacks must be in lowmem, we get that for free on ppc32
+	 * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
+	for_each_possible_cpu(i) {
+		critirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+#ifdef CONFIG_BOOKE
+		dbgirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+		mcheckirq_ctx[i] = (struct thread_info *)
+			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+#endif
+	}
+}
+#else
+#define exc_lvl_early_init()
+#endif
+
 /* Warning, IO base is not yet inited */
 void __init setup_arch(char **cmdline_p)
 {
@@ -271,18 +298,6 @@ void __init setup_arch(char **cmdline_p)
 
 	xmon_setup();
 
-#if defined(CONFIG_KGDB)
-	if (ppc_md.kgdb_map_scc)
-		ppc_md.kgdb_map_scc();
-	set_debug_traps();
-	if (strstr(cmd_line, "gdb")) {
-		if (ppc_md.progress)
-			ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
-		printk("kgdb breakpoint activated\n");
-		breakpoint();
-	}
-#endif
-
 	/*
 	 * Set cache line size based on type of cpu as a default.
 	 * Systems with OF can look in the properties on the cpu node(s)
@@ -305,6 +320,8 @@ void __init setup_arch(char **cmdline_p)
 	init_mm.end_data = (unsigned long) _edata;
 	init_mm.brk = klimit;
 
+	exc_lvl_early_init();
+
 	irqstack_early_init();
 
 	/* set up the bootmem stuff with available memory */
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 098fd96a394a..8b25f51f03bf 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -363,6 +363,8 @@ void __init setup_system(void)
 			  &__start___ftr_fixup, &__stop___ftr_fixup);
 	do_feature_fixups(powerpc_firmware_features,
 			  &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
+	do_lwsync_fixups(cur_cpu_spec->cpu_features,
+			 &__start___lwsync_fixup, &__stop___lwsync_fixup);
 
 	/*
 	 * Unflatten the device-tree passed by prom_init or kexec
@@ -609,9 +611,6 @@ void __init setup_per_cpu_areas(void)
 		paca[i].data_offset = ptr - __per_cpu_start;
 		memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
 	}
-
-	/* Now that per_cpu is setup, initialize cpu_sibling_map */
-	smp_setup_cpu_sibling_map();
 }
 #endif
 
diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c
index a65a44fbe523..a54405ebd7b0 100644
--- a/arch/powerpc/kernel/signal.c
+++ b/arch/powerpc/kernel/signal.c
@@ -9,7 +9,7 @@
  * this archive for more details.
  */
 
-#include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/signal.h>
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
@@ -112,7 +112,7 @@ static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka,
 	}
 }
 
-int do_signal(sigset_t *oldset, struct pt_regs *regs)
+static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs)
 {
 	siginfo_t info;
 	int signr;
@@ -120,7 +120,7 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 	int ret;
 	int is32 = is_32bit_task();
 
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+	if (current_thread_info()->local_flags & _TLF_RESTORE_SIGMASK)
 		oldset = &current->saved_sigmask;
 	else if (!oldset)
 		oldset = &current->blocked;
@@ -131,9 +131,10 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 	check_syscall_restart(regs, &ka, signr > 0);
 
 	if (signr <= 0) {
+		struct thread_info *ti = current_thread_info();
 		/* No signal to deliver -- put the saved sigmask back */
-		if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-			clear_thread_flag(TIF_RESTORE_SIGMASK);
+		if (ti->local_flags & _TLF_RESTORE_SIGMASK) {
+			ti->local_flags &= ~_TLF_RESTORE_SIGMASK;
 			sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
 		}
 		return 0;               /* no signals delivered */
@@ -144,8 +145,12 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 	 * user space. The DABR will have been cleared if it
 	 * triggered inside the kernel.
 	 */
-	if (current->thread.dabr)
+	if (current->thread.dabr) {
 		set_dabr(current->thread.dabr);
+#if defined(CONFIG_BOOKE)
+		mtspr(SPRN_DBCR0, current->thread.dbcr0);
+#endif
+	}
 
 	if (is32) {
         	if (ka.sa.sa_flags & SA_SIGINFO)
@@ -169,15 +174,31 @@ int do_signal(sigset_t *oldset, struct pt_regs *regs)
 
 		/*
 		 * A signal was successfully delivered; the saved sigmask is in
-		 * its frame, and we can clear the TIF_RESTORE_SIGMASK flag.
+		 * its frame, and we can clear the TLF_RESTORE_SIGMASK flag.
 		 */
-		if (test_thread_flag(TIF_RESTORE_SIGMASK))
-			clear_thread_flag(TIF_RESTORE_SIGMASK);
+		current_thread_info()->local_flags &= ~_TLF_RESTORE_SIGMASK;
+
+		/*
+		 * Let tracing know that we've done the handler setup.
+		 */
+		tracehook_signal_handler(signr, &info, &ka, regs,
+					 test_thread_flag(TIF_SINGLESTEP));
 	}
 
 	return ret;
 }
 
+void do_signal(struct pt_regs *regs, unsigned long thread_info_flags)
+{
+	if (thread_info_flags & _TIF_SIGPENDING)
+		do_signal_pending(NULL, regs);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+}
+
 long sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 		unsigned long r5, unsigned long r6, unsigned long r7,
 		unsigned long r8, struct pt_regs *regs)
diff --git a/arch/powerpc/kernel/signal.h b/arch/powerpc/kernel/signal.h
index 77efb3d5465a..28f4b9f5fe5e 100644
--- a/arch/powerpc/kernel/signal.h
+++ b/arch/powerpc/kernel/signal.h
@@ -24,6 +24,16 @@ extern int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka,
 			      siginfo_t *info, sigset_t *oldset,
 			      struct pt_regs *regs);
 
+extern unsigned long copy_fpr_to_user(void __user *to,
+				      struct task_struct *task);
+extern unsigned long copy_fpr_from_user(struct task_struct *task,
+					void __user *from);
+#ifdef CONFIG_VSX
+extern unsigned long copy_vsx_to_user(void __user *to,
+				      struct task_struct *task);
+extern unsigned long copy_vsx_from_user(struct task_struct *task,
+					void __user *from);
+#endif
 
 #ifdef CONFIG_PPC64
 
diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index ad6943468ee9..3e80aa32b8b0 100644
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -68,6 +68,13 @@
 #define ucontext	ucontext32
 
 /*
+ * Userspace code may pass a ucontext which doesn't include VSX added
+ * at the end.  We need to check for this case.
+ */
+#define UCONTEXTSIZEWITHOUTVSX \
+		(sizeof(struct ucontext) - sizeof(elf_vsrreghalf_t32))
+
+/*
  * Returning 0 means we return to userspace via
  * ret_from_except and thus restore all user
  * registers from *regs.  This is what we need
@@ -243,7 +250,7 @@ long sys_sigsuspend(old_sigset_t mask)
 
  	current->state = TASK_INTERRUPTIBLE;
  	schedule();
- 	set_thread_flag(TIF_RESTORE_SIGMASK);
+	set_restore_sigmask();
  	return -ERESTARTNOHAND;
 }
 
@@ -328,6 +335,75 @@ struct rt_sigframe {
 	int			abigap[56];
 };
 
+#ifdef CONFIG_VSX
+unsigned long copy_fpr_to_user(void __user *to,
+			       struct task_struct *task)
+{
+	double buf[ELF_NFPREG];
+	int i;
+
+	/* save FPR copy to local buffer then write to the thread_struct */
+	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
+		buf[i] = task->thread.TS_FPR(i);
+	memcpy(&buf[i], &task->thread.fpscr, sizeof(double));
+	return __copy_to_user(to, buf, ELF_NFPREG * sizeof(double));
+}
+
+unsigned long copy_fpr_from_user(struct task_struct *task,
+				 void __user *from)
+{
+	double buf[ELF_NFPREG];
+	int i;
+
+	if (__copy_from_user(buf, from, ELF_NFPREG * sizeof(double)))
+		return 1;
+	for (i = 0; i < (ELF_NFPREG - 1) ; i++)
+		task->thread.TS_FPR(i) = buf[i];
+	memcpy(&task->thread.fpscr, &buf[i], sizeof(double));
+
+	return 0;
+}
+
+unsigned long copy_vsx_to_user(void __user *to,
+			       struct task_struct *task)
+{
+	double buf[ELF_NVSRHALFREG];
+	int i;
+
+	/* save FPR copy to local buffer then write to the thread_struct */
+	for (i = 0; i < ELF_NVSRHALFREG; i++)
+		buf[i] = task->thread.fpr[i][TS_VSRLOWOFFSET];
+	return __copy_to_user(to, buf, ELF_NVSRHALFREG * sizeof(double));
+}
+
+unsigned long copy_vsx_from_user(struct task_struct *task,
+				 void __user *from)
+{
+	double buf[ELF_NVSRHALFREG];
+	int i;
+
+	if (__copy_from_user(buf, from, ELF_NVSRHALFREG * sizeof(double)))
+		return 1;
+	for (i = 0; i < ELF_NVSRHALFREG ; i++)
+		task->thread.fpr[i][TS_VSRLOWOFFSET] = buf[i];
+	return 0;
+}
+#else
+inline unsigned long copy_fpr_to_user(void __user *to,
+				      struct task_struct *task)
+{
+	return __copy_to_user(to, task->thread.fpr,
+			      ELF_NFPREG * sizeof(double));
+}
+
+inline unsigned long copy_fpr_from_user(struct task_struct *task,
+					void __user *from)
+{
+	return __copy_from_user(task->thread.fpr, from,
+			      ELF_NFPREG * sizeof(double));
+}
+#endif
+
 /*
  * Save the current user registers on the user stack.
  * We only save the altivec/spe registers if the process has used
@@ -336,13 +412,13 @@ struct rt_sigframe {
 static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 		int sigret)
 {
+	unsigned long msr = regs->msr;
+
 	/* Make sure floating point registers are stored in regs */
 	flush_fp_to_thread(current);
 
-	/* save general and floating-point registers */
-	if (save_general_regs(regs, frame) ||
-	    __copy_to_user(&frame->mc_fregs, current->thread.fpr,
-		    ELF_NFPREG * sizeof(double)))
+	/* save general registers */
+	if (save_general_regs(regs, frame))
 		return 1;
 
 #ifdef CONFIG_ALTIVEC
@@ -354,8 +430,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 			return 1;
 		/* set MSR_VEC in the saved MSR value to indicate that
 		   frame->mc_vregs contains valid data */
-		if (__put_user(regs->msr | MSR_VEC, &frame->mc_gregs[PT_MSR]))
-			return 1;
+		msr |= MSR_VEC;
 	}
 	/* else assert((regs->msr & MSR_VEC) == 0) */
 
@@ -367,7 +442,22 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 	if (__put_user(current->thread.vrsave, (u32 __user *)&frame->mc_vregs[32]))
 		return 1;
 #endif /* CONFIG_ALTIVEC */
-
+	if (copy_fpr_to_user(&frame->mc_fregs, current))
+		return 1;
+#ifdef CONFIG_VSX
+	/*
+	 * Copy VSR 0-31 upper half from thread_struct to local
+	 * buffer, then write that to userspace.  Also set MSR_VSX in
+	 * the saved MSR value to indicate that frame->mc_vregs
+	 * contains valid data
+	 */
+	if (current->thread.used_vsr) {
+		__giveup_vsx(current);
+		if (copy_vsx_to_user(&frame->mc_vsregs, current))
+			return 1;
+		msr |= MSR_VSX;
+	}
+#endif /* CONFIG_VSX */
 #ifdef CONFIG_SPE
 	/* save spe registers */
 	if (current->thread.used_spe) {
@@ -377,8 +467,7 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 			return 1;
 		/* set MSR_SPE in the saved MSR value to indicate that
 		   frame->mc_vregs contains valid data */
-		if (__put_user(regs->msr | MSR_SPE, &frame->mc_gregs[PT_MSR]))
-			return 1;
+		msr |= MSR_SPE;
 	}
 	/* else assert((regs->msr & MSR_SPE) == 0) */
 
@@ -387,6 +476,8 @@ static int save_user_regs(struct pt_regs *regs, struct mcontext __user *frame,
 		return 1;
 #endif /* CONFIG_SPE */
 
+	if (__put_user(msr, &frame->mc_gregs[PT_MSR]))
+		return 1;
 	if (sigret) {
 		/* Set up the sigreturn trampoline: li r0,sigret; sc */
 		if (__put_user(0x38000000UL + sigret, &frame->tramp[0])
@@ -409,6 +500,9 @@ static long restore_user_regs(struct pt_regs *regs,
 	long err;
 	unsigned int save_r2 = 0;
 	unsigned long msr;
+#ifdef CONFIG_VSX
+	int i;
+#endif
 
 	/*
 	 * restore general registers but not including MSR or SOFTE. Also
@@ -436,16 +530,11 @@ static long restore_user_regs(struct pt_regs *regs,
 	 */
 	discard_lazy_cpu_state();
 
-	/* force the process to reload the FP registers from
-	   current->thread when it next does FP instructions */
-	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1);
-	if (__copy_from_user(current->thread.fpr, &sr->mc_fregs,
-			     sizeof(sr->mc_fregs)))
-		return 1;
-
 #ifdef CONFIG_ALTIVEC
-	/* force the process to reload the altivec registers from
-	   current->thread when it next does altivec instructions */
+	/*
+	 * Force the process to reload the altivec registers from
+	 * current->thread when it next does altivec instructions
+	 */
 	regs->msr &= ~MSR_VEC;
 	if (msr & MSR_VEC) {
 		/* restore altivec registers from the stack */
@@ -459,6 +548,31 @@ static long restore_user_regs(struct pt_regs *regs,
 	if (__get_user(current->thread.vrsave, (u32 __user *)&sr->mc_vregs[32]))
 		return 1;
 #endif /* CONFIG_ALTIVEC */
+	if (copy_fpr_from_user(current, &sr->mc_fregs))
+		return 1;
+
+#ifdef CONFIG_VSX
+	/*
+	 * Force the process to reload the VSX registers from
+	 * current->thread when it next does VSX instruction.
+	 */
+	regs->msr &= ~MSR_VSX;
+	if (msr & MSR_VSX) {
+		/*
+		 * Restore altivec registers from the stack to a local
+		 * buffer, then write this out to the thread_struct
+		 */
+		if (copy_vsx_from_user(current, &sr->mc_vsregs))
+			return 1;
+	} else if (current->thread.used_vsr)
+		for (i = 0; i < 32 ; i++)
+			current->thread.fpr[i][TS_VSRLOWOFFSET] = 0;
+#endif /* CONFIG_VSX */
+	/*
+	 * force the process to reload the FP registers from
+	 * current->thread when it next does FP instructions
+	 */
+	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1);
 
 #ifdef CONFIG_SPE
 	/* force the process to reload the spe registers from
@@ -823,12 +937,42 @@ long sys_swapcontext(struct ucontext __user *old_ctx,
 {
 	unsigned char tmp;
 
+#ifdef CONFIG_PPC64
+	unsigned long new_msr = 0;
+
+	if (new_ctx &&
+	    __get_user(new_msr, &new_ctx->uc_mcontext.mc_gregs[PT_MSR]))
+		return -EFAULT;
+	/*
+	 * Check that the context is not smaller than the original
+	 * size (with VMX but without VSX)
+	 */
+	if (ctx_size < UCONTEXTSIZEWITHOUTVSX)
+		return -EINVAL;
+	/*
+	 * If the new context state sets the MSR VSX bits but
+	 * it doesn't provide VSX state.
+	 */
+	if ((ctx_size < sizeof(struct ucontext)) &&
+	    (new_msr & MSR_VSX))
+		return -EINVAL;
+#ifdef CONFIG_VSX
+	/*
+	 * If userspace doesn't provide enough room for VSX data,
+	 * but current thread has used VSX, we don't have anywhere
+	 * to store the full context back into.
+	 */
+	if ((ctx_size < sizeof(struct ucontext)) &&
+	    (current->thread.used_vsr && old_ctx))
+		return -EINVAL;
+#endif
+#else
 	/* Context size is for future use. Right now, we only make sure
 	 * we are passed something we understand
 	 */
 	if (ctx_size < sizeof(struct ucontext))
 		return -EINVAL;
-
+#endif
 	if (old_ctx != NULL) {
 		struct mcontext __user *mctx;
 
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index da7c058e3731..65ad925c3a8f 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -112,11 +112,29 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
 #else /* CONFIG_ALTIVEC */
 	err |= __put_user(0, &sc->v_regs);
 #endif /* CONFIG_ALTIVEC */
+	flush_fp_to_thread(current);
+	/* copy fpr regs and fpscr */
+	err |= copy_fpr_to_user(&sc->fp_regs, current);
+#ifdef CONFIG_VSX
+	/*
+	 * Copy VSX low doubleword to local buffer for formatting,
+	 * then out to userspace.  Update v_regs to point after the
+	 * VMX data.
+	 */
+	if (current->thread.used_vsr) {
+		__giveup_vsx(current);
+		v_regs += ELF_NVRREG;
+		err |= copy_vsx_to_user(v_regs, current);
+		/* set MSR_VSX in the MSR value in the frame to
+		 * indicate that sc->vs_reg) contains valid data.
+		 */
+		msr |= MSR_VSX;
+	}
+#endif /* CONFIG_VSX */
 	err |= __put_user(&sc->gp_regs, &sc->regs);
 	WARN_ON(!FULL_REGS(regs));
 	err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
 	err |= __put_user(msr, &sc->gp_regs[PT_MSR]);
-	err |= __copy_to_user(&sc->fp_regs, &current->thread.fpr, FP_REGS_SIZE);
 	err |= __put_user(signr, &sc->signal);
 	err |= __put_user(handler, &sc->handler);
 	if (set != NULL)
@@ -137,29 +155,32 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 #endif
 	unsigned long err = 0;
 	unsigned long save_r13 = 0;
-	elf_greg_t *gregs = (elf_greg_t *)regs;
 	unsigned long msr;
+#ifdef CONFIG_VSX
 	int i;
+#endif
 
 	/* If this is not a signal return, we preserve the TLS in r13 */
 	if (!sig)
 		save_r13 = regs->gpr[13];
 
-	/* copy everything before MSR */
-	err |= __copy_from_user(regs, &sc->gp_regs,
-				PT_MSR*sizeof(unsigned long));
-
+	/* copy the GPRs */
+	err |= __copy_from_user(regs->gpr, sc->gp_regs, sizeof(regs->gpr));
+	err |= __get_user(regs->nip, &sc->gp_regs[PT_NIP]);
 	/* get MSR separately, transfer the LE bit if doing signal return */
 	err |= __get_user(msr, &sc->gp_regs[PT_MSR]);
 	if (sig)
 		regs->msr = (regs->msr & ~MSR_LE) | (msr & MSR_LE);
-
+	err |= __get_user(regs->orig_gpr3, &sc->gp_regs[PT_ORIG_R3]);
+	err |= __get_user(regs->ctr, &sc->gp_regs[PT_CTR]);
+	err |= __get_user(regs->link, &sc->gp_regs[PT_LNK]);
+	err |= __get_user(regs->xer, &sc->gp_regs[PT_XER]);
+	err |= __get_user(regs->ccr, &sc->gp_regs[PT_CCR]);
 	/* skip SOFTE */
-	for (i = PT_MSR+1; i <= PT_RESULT; i++) {
-		if (i == PT_SOFTE)
-			continue;
-		err |= __get_user(gregs[i], &sc->gp_regs[i]);
-	}
+	err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]);
+	err |= __get_user(regs->dar, &sc->gp_regs[PT_DAR]);
+	err |= __get_user(regs->dsisr, &sc->gp_regs[PT_DSISR]);
+	err |= __get_user(regs->result, &sc->gp_regs[PT_RESULT]);
 
 	if (!sig)
 		regs->gpr[13] = save_r13;
@@ -180,9 +201,7 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 	 * This has to be done before copying stuff into current->thread.fpr/vr
 	 * for the reasons explained in the previous comment.
 	 */
-	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC);
-
-	err |= __copy_from_user(&current->thread.fpr, &sc->fp_regs, FP_REGS_SIZE);
+	regs->msr &= ~(MSR_FP | MSR_FE0 | MSR_FE1 | MSR_VEC | MSR_VSX);
 
 #ifdef CONFIG_ALTIVEC
 	err |= __get_user(v_regs, &sc->v_regs);
@@ -202,7 +221,23 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig,
 	else
 		current->thread.vrsave = 0;
 #endif /* CONFIG_ALTIVEC */
+	/* restore floating point */
+	err |= copy_fpr_from_user(current, &sc->fp_regs);
+#ifdef CONFIG_VSX
+	/*
+	 * Get additional VSX data. Update v_regs to point after the
+	 * VMX data.  Copy VSX low doubleword from userspace to local
+	 * buffer for formatting, then into the taskstruct.
+	 */
+	v_regs += ELF_NVRREG;
+	if ((msr & MSR_VSX) != 0)
+		err |= copy_vsx_from_user(current, v_regs);
+	else
+		for (i = 0; i < 32 ; i++)
+			current->thread.fpr[i][TS_VSRLOWOFFSET] = 0;
 
+#else
+#endif
 	return err;
 }
 
@@ -233,6 +268,13 @@ static long setup_trampoline(unsigned int syscall, unsigned int __user *tramp)
 }
 
 /*
+ * Userspace code may pass a ucontext which doesn't include VSX added
+ * at the end.  We need to check for this case.
+ */
+#define UCONTEXTSIZEWITHOUTVSX \
+		(sizeof(struct ucontext) - 32*sizeof(long))
+
+/*
  * Handle {get,set,swap}_context operations
  */
 int sys_swapcontext(struct ucontext __user *old_ctx,
@@ -241,13 +283,34 @@ int sys_swapcontext(struct ucontext __user *old_ctx,
 {
 	unsigned char tmp;
 	sigset_t set;
+	unsigned long new_msr = 0;
 
-	/* Context size is for future use. Right now, we only make sure
-	 * we are passed something we understand
+	if (new_ctx &&
+	    __get_user(new_msr, &new_ctx->uc_mcontext.gp_regs[PT_MSR]))
+		return -EFAULT;
+	/*
+	 * Check that the context is not smaller than the original
+	 * size (with VMX but without VSX)
 	 */
-	if (ctx_size < sizeof(struct ucontext))
+	if (ctx_size < UCONTEXTSIZEWITHOUTVSX)
 		return -EINVAL;
-
+	/*
+	 * If the new context state sets the MSR VSX bits but
+	 * it doesn't provide VSX state.
+	 */
+	if ((ctx_size < sizeof(struct ucontext)) &&
+	    (new_msr & MSR_VSX))
+		return -EINVAL;
+#ifdef CONFIG_VSX
+	/*
+	 * If userspace doesn't provide enough room for VSX data,
+	 * but current thread has used VSX, we don't have anywhere
+	 * to store the full context back into.
+	 */
+	if ((ctx_size < sizeof(struct ucontext)) &&
+	    (current->thread.used_vsr && old_ctx))
+		return -EINVAL;
+#endif
 	if (old_ctx != NULL) {
 		if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx))
 		    || setup_sigcontext(&old_ctx->uc_mcontext, regs, 0, NULL, 0)
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 1457aa0a08f1..5337ca7bb649 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -41,6 +41,7 @@
 #include <asm/smp.h>
 #include <asm/time.h>
 #include <asm/machdep.h>
+#include <asm/cputhreads.h>
 #include <asm/cputable.h>
 #include <asm/system.h>
 #include <asm/mpic.h>
@@ -62,22 +63,20 @@ struct thread_info *secondary_ti;
 cpumask_t cpu_possible_map = CPU_MASK_NONE;
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 DEFINE_PER_CPU(cpumask_t, cpu_sibling_map) = CPU_MASK_NONE;
+DEFINE_PER_CPU(cpumask_t, cpu_core_map) = CPU_MASK_NONE;
 
 EXPORT_SYMBOL(cpu_online_map);
 EXPORT_SYMBOL(cpu_possible_map);
 EXPORT_PER_CPU_SYMBOL(cpu_sibling_map);
+EXPORT_PER_CPU_SYMBOL(cpu_core_map);
 
 /* SMP operations for this machine */
 struct smp_ops_t *smp_ops;
 
 static volatile unsigned int cpu_callin_map[NR_CPUS];
 
-void smp_call_function_interrupt(void);
-
 int smt_enabled_at_boot = 1;
 
-static int ipi_fail_ok;
-
 static void (*crash_ipi_function_ptr)(struct pt_regs *) = NULL;
 
 #ifdef CONFIG_PPC64
@@ -99,12 +98,15 @@ void smp_message_recv(int msg)
 {
 	switch(msg) {
 	case PPC_MSG_CALL_FUNCTION:
-		smp_call_function_interrupt();
+		generic_smp_call_function_interrupt();
 		break;
 	case PPC_MSG_RESCHEDULE:
 		/* XXX Do we have to do this? */
 		set_need_resched();
 		break;
+	case PPC_MSG_CALL_FUNC_SINGLE:
+		generic_smp_call_function_single_interrupt();
+		break;
 	case PPC_MSG_DEBUGGER_BREAK:
 		if (crash_ipi_function_ptr) {
 			crash_ipi_function_ptr(get_irq_regs());
@@ -128,6 +130,19 @@ void smp_send_reschedule(int cpu)
 		smp_ops->message_pass(cpu, PPC_MSG_RESCHEDULE);
 }
 
+void arch_send_call_function_single_ipi(int cpu)
+{
+	smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNC_SINGLE);
+}
+
+void arch_send_call_function_ipi(cpumask_t mask)
+{
+	unsigned int cpu;
+
+	for_each_cpu_mask(cpu, mask)
+		smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNCTION);
+}
+
 #ifdef CONFIG_DEBUGGER
 void smp_send_debugger_break(int cpu)
 {
@@ -154,223 +169,13 @@ static void stop_this_cpu(void *dummy)
 		;
 }
 
-/*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
- * Stolen from the i386 version.
- */
-static  __cacheline_aligned_in_smp DEFINE_SPINLOCK(call_lock);
-
-static struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	atomic_t started;
-	atomic_t finished;
-	int wait;
-} *call_data;
-
-/* delay of at least 8 seconds */
-#define SMP_CALL_TIMEOUT	8
-
-/*
- * These functions send a 'generic call function' IPI to other online
- * CPUS in the system.
- *
- * [SUMMARY] Run a function on other CPUs.
- * <func> The function to run. This must be fast and non-blocking.
- * <info> An arbitrary pointer to pass to the function.
- * <nonatomic> currently unused.
- * <wait> If true, wait (atomically) until function has completed on other CPUs.
- * [RETURNS] 0 on success, else a negative status code. Does not return until
- * remote CPUs are nearly ready to execute <<func>> or are or have executed.
- * <map> is a cpu map of the cpus to send IPI to.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-static int __smp_call_function_map(void (*func) (void *info), void *info,
-				   int nonatomic, int wait, cpumask_t map)
-{
-	struct call_data_struct data;
-	int ret = -1, num_cpus;
-	int cpu;
-	u64 timeout;
-
-	if (unlikely(smp_ops == NULL))
-		return ret;
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	/* remove 'self' from the map */
-	if (cpu_isset(smp_processor_id(), map))
-		cpu_clear(smp_processor_id(), map);
-
-	/* sanity check the map, remove any non-online processors. */
-	cpus_and(map, map, cpu_online_map);
-
-	num_cpus = cpus_weight(map);
-	if (!num_cpus)
-		goto done;
-
-	call_data = &data;
-	smp_wmb();
-	/* Send a message to all CPUs in the map */
-	for_each_cpu_mask(cpu, map)
-		smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNCTION);
-
-	timeout = get_tb() + (u64) SMP_CALL_TIMEOUT * tb_ticks_per_sec;
-
-	/* Wait for indication that they have received the message */
-	while (atomic_read(&data.started) != num_cpus) {
-		HMT_low();
-		if (get_tb() >= timeout) {
-			printk("smp_call_function on cpu %d: other cpus not "
-				"responding (%d)\n", smp_processor_id(),
-				atomic_read(&data.started));
-			if (!ipi_fail_ok)
-				debugger(NULL);
-			goto out;
-		}
-	}
-
-	/* optionally wait for the CPUs to complete */
-	if (wait) {
-		while (atomic_read(&data.finished) != num_cpus) {
-			HMT_low();
-			if (get_tb() >= timeout) {
-				printk("smp_call_function on cpu %d: other "
-					"cpus not finishing (%d/%d)\n",
-					smp_processor_id(),
-					atomic_read(&data.finished),
-					atomic_read(&data.started));
-				debugger(NULL);
-				goto out;
-			}
-		}
-	}
-
- done:
-	ret = 0;
-
- out:
-	call_data = NULL;
-	HMT_medium();
-	return ret;
-}
-
-static int __smp_call_function(void (*func)(void *info), void *info,
-			       int nonatomic, int wait)
-{
-	int ret;
-	spin_lock(&call_lock);
-	ret =__smp_call_function_map(func, info, nonatomic, wait,
-				       cpu_online_map);
-	spin_unlock(&call_lock);
-	return ret;
-}
-
-int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
-			int wait)
-{
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	return __smp_call_function(func, info, nonatomic, wait);
-}
-EXPORT_SYMBOL(smp_call_function);
-
-int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
-			     int nonatomic, int wait)
-{
-	cpumask_t map = CPU_MASK_NONE;
-	int ret = 0;
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	if (!cpu_online(cpu))
-		return -EINVAL;
-
-	cpu_set(cpu, map);
-	if (cpu != get_cpu()) {
-		spin_lock(&call_lock);
-		ret = __smp_call_function_map(func, info, nonatomic, wait, map);
-		spin_unlock(&call_lock);
-	} else {
-		local_irq_disable();
-		func(info);
-		local_irq_enable();
-	}
-	put_cpu();
-	return ret;
-}
-EXPORT_SYMBOL(smp_call_function_single);
-
 void smp_send_stop(void)
 {
-	int nolock;
-
-	/* It's OK to fail sending the IPI, since the alternative is to
-	 * be stuck forever waiting on the other CPU to take the interrupt.
-	 *
-	 * It's better to at least continue and go through reboot, since this
-	 * function is usually called at panic or reboot time in the first
-	 * place.
-	 */
-	ipi_fail_ok = 1;
-
-	/* Don't deadlock in case we got called through panic */
-	nolock = !spin_trylock(&call_lock);
-	__smp_call_function_map(stop_this_cpu, NULL, 1, 0, cpu_online_map);
-	if (!nolock)
-		spin_unlock(&call_lock);
-}
-
-void smp_call_function_interrupt(void)
-{
-	void (*func) (void *info);
-	void *info;
-	int wait;
-
-	/* call_data will be NULL if the sender timed out while
-	 * waiting on us to receive the call.
-	 */
-	if (!call_data)
-		return;
-
-	func = call_data->func;
-	info = call_data->info;
-	wait = call_data->wait;
-
-	if (!wait)
-		smp_mb__before_atomic_inc();
-
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function
-	 */
-	atomic_inc(&call_data->started);
-	/*
-	 * At this point the info structure may be out of scope unless wait==1
-	 */
-	(*func)(info);
-	if (wait) {
-		smp_mb__before_atomic_inc();
-		atomic_inc(&call_data->finished);
-	}
+	smp_call_function(stop_this_cpu, NULL, 0);
 }
 
-extern struct gettimeofday_struct do_gtod;
-
 struct thread_info *current_set[NR_CPUS];
 
-DECLARE_PER_CPU(unsigned int, pvr);
-
 static void __devinit smp_store_cpu_info(int id)
 {
 	per_cpu(pvr, id) = mfspr(SPRN_PVR);
@@ -426,6 +231,8 @@ void __devinit smp_prepare_boot_cpu(void)
 	BUG_ON(smp_processor_id() != boot_cpuid);
 
 	cpu_set(boot_cpuid, cpu_online_map);
+	cpu_set(boot_cpuid, per_cpu(cpu_sibling_map, boot_cpuid));
+	cpu_set(boot_cpuid, per_cpu(cpu_core_map, boot_cpuid));
 #ifdef CONFIG_PPC64
 	paca[boot_cpuid].__current = current;
 #endif
@@ -573,11 +380,60 @@ int __cpuinit __cpu_up(unsigned int cpu)
 	return 0;
 }
 
+/* Return the value of the reg property corresponding to the given
+ * logical cpu.
+ */
+int cpu_to_core_id(int cpu)
+{
+	struct device_node *np;
+	const int *reg;
+	int id = -1;
+
+	np = of_get_cpu_node(cpu, NULL);
+	if (!np)
+		goto out;
+
+	reg = of_get_property(np, "reg", NULL);
+	if (!reg)
+		goto out;
+
+	id = *reg;
+out:
+	of_node_put(np);
+	return id;
+}
+
+/* Must be called when no change can occur to cpu_present_map,
+ * i.e. during cpu online or offline.
+ */
+static struct device_node *cpu_to_l2cache(int cpu)
+{
+	struct device_node *np;
+	const phandle *php;
+	phandle ph;
+
+	if (!cpu_present(cpu))
+		return NULL;
+
+	np = of_get_cpu_node(cpu, NULL);
+	if (np == NULL)
+		return NULL;
+
+	php = of_get_property(np, "l2-cache", NULL);
+	if (php == NULL)
+		return NULL;
+	ph = *php;
+	of_node_put(np);
+
+	return of_find_node_by_phandle(ph);
+}
 
 /* Activate a secondary processor. */
 int __devinit start_secondary(void *unused)
 {
 	unsigned int cpu = smp_processor_id();
+	struct device_node *l2_cache;
+	int i, base;
 
 	atomic_inc(&init_mm.mm_count);
 	current->active_mm = &init_mm;
@@ -596,9 +452,36 @@ int __devinit start_secondary(void *unused)
 
 	secondary_cpu_time_init();
 
-	spin_lock(&call_lock);
+	ipi_call_lock();
 	cpu_set(cpu, cpu_online_map);
-	spin_unlock(&call_lock);
+	/* Update sibling maps */
+	base = cpu_first_thread_in_core(cpu);
+	for (i = 0; i < threads_per_core; i++) {
+		if (cpu_is_offline(base + i))
+			continue;
+		cpu_set(cpu, per_cpu(cpu_sibling_map, base + i));
+		cpu_set(base + i, per_cpu(cpu_sibling_map, cpu));
+
+		/* cpu_core_map should be a superset of
+		 * cpu_sibling_map even if we don't have cache
+		 * information, so update the former here, too.
+		 */
+		cpu_set(cpu, per_cpu(cpu_core_map, base +i));
+		cpu_set(base + i, per_cpu(cpu_core_map, cpu));
+	}
+	l2_cache = cpu_to_l2cache(cpu);
+	for_each_online_cpu(i) {
+		struct device_node *np = cpu_to_l2cache(i);
+		if (!np)
+			continue;
+		if (np == l2_cache) {
+			cpu_set(cpu, per_cpu(cpu_core_map, i));
+			cpu_set(i, per_cpu(cpu_core_map, cpu));
+		}
+		of_node_put(np);
+	}
+	of_node_put(l2_cache);
+	ipi_call_unlock();
 
 	local_irq_enable();
 
@@ -635,10 +518,42 @@ void __init smp_cpus_done(unsigned int max_cpus)
 #ifdef CONFIG_HOTPLUG_CPU
 int __cpu_disable(void)
 {
-	if (smp_ops->cpu_disable)
-		return smp_ops->cpu_disable();
+	struct device_node *l2_cache;
+	int cpu = smp_processor_id();
+	int base, i;
+	int err;
 
-	return -ENOSYS;
+	if (!smp_ops->cpu_disable)
+		return -ENOSYS;
+
+	err = smp_ops->cpu_disable();
+	if (err)
+		return err;
+
+	/* Update sibling maps */
+	base = cpu_first_thread_in_core(cpu);
+	for (i = 0; i < threads_per_core; i++) {
+		cpu_clear(cpu, per_cpu(cpu_sibling_map, base + i));
+		cpu_clear(base + i, per_cpu(cpu_sibling_map, cpu));
+		cpu_clear(cpu, per_cpu(cpu_core_map, base +i));
+		cpu_clear(base + i, per_cpu(cpu_core_map, cpu));
+	}
+
+	l2_cache = cpu_to_l2cache(cpu);
+	for_each_present_cpu(i) {
+		struct device_node *np = cpu_to_l2cache(i);
+		if (!np)
+			continue;
+		if (np == l2_cache) {
+			cpu_clear(cpu, per_cpu(cpu_core_map, i));
+			cpu_clear(i, per_cpu(cpu_core_map, cpu));
+		}
+		of_node_put(np);
+	}
+	of_node_put(l2_cache);
+
+
+	return 0;
 }
 
 void __cpu_die(unsigned int cpu)
diff --git a/arch/powerpc/kernel/softemu8xx.c b/arch/powerpc/kernel/softemu8xx.c
index 67d6f6890edc..c906c4bf6835 100644
--- a/arch/powerpc/kernel/softemu8xx.c
+++ b/arch/powerpc/kernel/softemu8xx.c
@@ -124,7 +124,7 @@ int Soft_emulate_8xx(struct pt_regs *regs)
 	disp = instword & 0xffff;
 
 	ea = (u32 *)(regs->gpr[idxreg] + disp);
-	ip = (u32 *)&current->thread.fpr[flreg];
+	ip = (u32 *)&current->thread.TS_FPR(flreg);
 
 	switch ( inst )
 	{
@@ -168,7 +168,7 @@ int Soft_emulate_8xx(struct pt_regs *regs)
 		break;
 	case FMR:
 		/* assume this is a fp move -- Cort */
-		memcpy(ip, &current->thread.fpr[(instword>>11)&0x1f],
+		memcpy(ip, &current->thread.TS_FPR((instword>>11)&0x1f),
 		       sizeof(double));
 		break;
 	default:
diff --git a/arch/powerpc/kernel/stacktrace.c b/arch/powerpc/kernel/stacktrace.c
index 3cf0d94ba340..b0dbb1daa4df 100644
--- a/arch/powerpc/kernel/stacktrace.c
+++ b/arch/powerpc/kernel/stacktrace.c
@@ -10,34 +10,34 @@
  *      2 of the License, or (at your option) any later version.
  */
 
+#include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
-#include <linux/module.h>
 #include <asm/ptrace.h>
+#include <asm/processor.h>
 
 /*
  * Save stack-backtrace addresses into a stack_trace buffer.
  */
-void save_stack_trace(struct stack_trace *trace)
+static void save_context_stack(struct stack_trace *trace, unsigned long sp,
+			struct task_struct *tsk, int savesched)
 {
-	unsigned long sp;
-
-	asm("mr %0,1" : "=r" (sp));
-
 	for (;;) {
 		unsigned long *stack = (unsigned long *) sp;
 		unsigned long newsp, ip;
 
-		if (!validate_sp(sp, current, STACK_FRAME_OVERHEAD))
+		if (!validate_sp(sp, tsk, STACK_FRAME_OVERHEAD))
 			return;
 
 		newsp = stack[0];
 		ip = stack[STACK_FRAME_LR_SAVE];
 
-		if (!trace->skip)
-			trace->entries[trace->nr_entries++] = ip;
-		else
-			trace->skip--;
+		if (savesched || !in_sched_functions(ip)) {
+			if (!trace->skip)
+				trace->entries[trace->nr_entries++] = ip;
+			else
+				trace->skip--;
+		}
 
 		if (trace->nr_entries >= trace->max_entries)
 			return;
@@ -45,4 +45,19 @@ void save_stack_trace(struct stack_trace *trace)
 		sp = newsp;
 	}
 }
+
+void save_stack_trace(struct stack_trace *trace)
+{
+	unsigned long sp;
+
+	asm("mr %0,1" : "=r" (sp));
+
+	save_context_stack(trace, sp, current, 1);
+}
 EXPORT_SYMBOL_GPL(save_stack_trace);
+
+void save_stack_trace_tsk(struct task_struct *tsk, struct stack_trace *trace)
+{
+	save_context_stack(trace, tsk->thread.ksp, tsk, 0);
+}
+EXPORT_SYMBOL_GPL(save_stack_trace_tsk);
diff --git a/arch/powerpc/kernel/suspend.c b/arch/powerpc/kernel/suspend.c
index 8cee57107541..6fc6328dc626 100644
--- a/arch/powerpc/kernel/suspend.c
+++ b/arch/powerpc/kernel/suspend.c
@@ -7,6 +7,7 @@
  * Copyright (c) 2001 Patrick Mochel <mochel@osdl.org>
  */
 
+#include <linux/mm.h>
 #include <asm/page.h>
 
 /* References to section boundaries */
diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c
index 4fe69ca24481..c04832c4a02e 100644
--- a/arch/powerpc/kernel/syscalls.c
+++ b/arch/powerpc/kernel/syscalls.c
@@ -143,6 +143,9 @@ static inline unsigned long do_mmap2(unsigned long addr, size_t len,
 	struct file * file = NULL;
 	unsigned long ret = -EINVAL;
 
+	if (!arch_validate_prot(prot))
+		goto out;
+
 	if (shift) {
 		if (off & ((1 << shift) - 1))
 			goto out;
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index c8127f832df0..56d172d16e56 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -22,13 +22,17 @@
 
 static DEFINE_PER_CPU(struct cpu, cpu_devices);
 
+static DEFINE_PER_CPU(struct kobject *, cache_toplevel);
+
 /* SMT stuff */
 
 #ifdef CONFIG_PPC_MULTIPLATFORM
 /* Time in microseconds we delay before sleeping in the idle loop */
 DEFINE_PER_CPU(unsigned long, smt_snooze_delay) = { 100 };
 
-static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf,
+static ssize_t store_smt_snooze_delay(struct sys_device *dev,
+				      struct sysdev_attribute *attr,
+				      const char *buf,
 				      size_t count)
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
@@ -44,7 +48,9 @@ static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf,
 	return count;
 }
 
-static ssize_t show_smt_snooze_delay(struct sys_device *dev, char *buf)
+static ssize_t show_smt_snooze_delay(struct sys_device *dev,
+				     struct sysdev_attribute *attr,
+				     char *buf)
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 
@@ -152,14 +158,17 @@ static unsigned long write_##NAME(unsigned long val) \
 	mtspr(ADDRESS, val); \
 	return 0; \
 } \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+			struct sysdev_attribute *attr, \
+			char *buf) \
 { \
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev); \
 	unsigned long val = run_on_cpu(cpu->sysdev.id, read_##NAME, 0); \
 	return sprintf(buf, "%lx\n", val); \
 } \
 static ssize_t __used \
-	store_##NAME(struct sys_device *dev, const char *buf, size_t count) \
+	store_##NAME(struct sys_device *dev, struct sysdev_attribute *attr, \
+			const char *buf, size_t count) \
 { \
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev); \
 	unsigned long val; \
@@ -290,8 +299,289 @@ static struct sysdev_attribute pa6t_attrs[] = {
 #endif /* CONFIG_DEBUG_KERNEL */
 };
 
+struct cache_desc {
+	struct kobject kobj;
+	struct cache_desc *next;
+	const char *type;	/* Instruction, Data, or Unified */
+	u32 size;		/* total cache size in KB */
+	u32 line_size;		/* in bytes */
+	u32 nr_sets;		/* number of sets */
+	u32 level;		/* e.g. 1, 2, 3... */
+	u32 associativity;	/* e.g. 8-way... 0 is fully associative */
+};
+
+DEFINE_PER_CPU(struct cache_desc *, cache_desc);
+
+static struct cache_desc *kobj_to_cache_desc(struct kobject *k)
+{
+	return container_of(k, struct cache_desc, kobj);
+}
+
+static void cache_desc_release(struct kobject *k)
+{
+	struct cache_desc *desc = kobj_to_cache_desc(k);
+
+	pr_debug("%s: releasing %s\n", __func__, kobject_name(k));
+
+	if (desc->next)
+		kobject_put(&desc->next->kobj);
+
+	kfree(kobj_to_cache_desc(k));
+}
+
+static ssize_t cache_desc_show(struct kobject *k, struct attribute *attr, char *buf)
+{
+	struct kobj_attribute *kobj_attr;
+
+	kobj_attr = container_of(attr, struct kobj_attribute, attr);
+
+	return kobj_attr->show(k, kobj_attr, buf);
+}
+
+static struct sysfs_ops cache_desc_sysfs_ops = {
+	.show = cache_desc_show,
+};
+
+static struct kobj_type cache_desc_type = {
+	.release = cache_desc_release,
+	.sysfs_ops = &cache_desc_sysfs_ops,
+};
+
+static ssize_t cache_size_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%uK\n", cache->size);
+}
+
+static struct kobj_attribute cache_size_attr =
+	__ATTR(size, 0444, cache_size_show, NULL);
+
+static ssize_t cache_line_size_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%u\n", cache->line_size);
+}
+
+static struct kobj_attribute cache_line_size_attr =
+	__ATTR(coherency_line_size, 0444, cache_line_size_show, NULL);
+
+static ssize_t cache_nr_sets_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%u\n", cache->nr_sets);
+}
+
+static struct kobj_attribute cache_nr_sets_attr =
+	__ATTR(number_of_sets, 0444, cache_nr_sets_show, NULL);
+
+static ssize_t cache_type_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%s\n", cache->type);
+}
+
+static struct kobj_attribute cache_type_attr =
+	__ATTR(type, 0444, cache_type_show, NULL);
+
+static ssize_t cache_level_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%u\n", cache->level);
+}
+
+static struct kobj_attribute cache_level_attr =
+	__ATTR(level, 0444, cache_level_show, NULL);
+
+static ssize_t cache_assoc_show(struct kobject *k, struct kobj_attribute *attr, char *buf)
+{
+	struct cache_desc *cache = kobj_to_cache_desc(k);
+
+	return sprintf(buf, "%u\n", cache->associativity);
+}
+
+static struct kobj_attribute cache_assoc_attr =
+	__ATTR(ways_of_associativity, 0444, cache_assoc_show, NULL);
+
+struct cache_desc_info {
+	const char *type;
+	const char *size_prop;
+	const char *line_size_prop;
+	const char *nr_sets_prop;
+};
+
+/* PowerPC Processor binding says the [di]-cache-* must be equal on
+ * unified caches, so just use d-cache properties. */
+static struct cache_desc_info ucache_info = {
+	.type = "Unified",
+	.size_prop = "d-cache-size",
+	.line_size_prop = "d-cache-line-size",
+	.nr_sets_prop = "d-cache-sets",
+};
 
-static void register_cpu_online(unsigned int cpu)
+static struct cache_desc_info dcache_info = {
+	.type = "Data",
+	.size_prop = "d-cache-size",
+	.line_size_prop = "d-cache-line-size",
+	.nr_sets_prop = "d-cache-sets",
+};
+
+static struct cache_desc_info icache_info = {
+	.type = "Instruction",
+	.size_prop = "i-cache-size",
+	.line_size_prop = "i-cache-line-size",
+	.nr_sets_prop = "i-cache-sets",
+};
+
+static struct cache_desc * __cpuinit create_cache_desc(struct device_node *np, struct kobject *parent, int index, int level, struct cache_desc_info *info)
+{
+	const u32 *cache_line_size;
+	struct cache_desc *new;
+	const u32 *cache_size;
+	const u32 *nr_sets;
+	int rc;
+
+	new = kzalloc(sizeof(*new), GFP_KERNEL);
+	if (!new)
+		return NULL;
+
+	rc = kobject_init_and_add(&new->kobj, &cache_desc_type, parent,
+				  "index%d", index);
+	if (rc)
+		goto err;
+
+	/* type */
+	new->type = info->type;
+	rc = sysfs_create_file(&new->kobj, &cache_type_attr.attr);
+	WARN_ON(rc);
+
+	/* level */
+	new->level = level;
+	rc = sysfs_create_file(&new->kobj, &cache_level_attr.attr);
+	WARN_ON(rc);
+
+	/* size */
+	cache_size = of_get_property(np, info->size_prop, NULL);
+	if (cache_size) {
+		new->size = *cache_size / 1024;
+		rc = sysfs_create_file(&new->kobj,
+				       &cache_size_attr.attr);
+		WARN_ON(rc);
+	}
+
+	/* coherency_line_size */
+	cache_line_size = of_get_property(np, info->line_size_prop, NULL);
+	if (cache_line_size) {
+		new->line_size = *cache_line_size;
+		rc = sysfs_create_file(&new->kobj,
+				       &cache_line_size_attr.attr);
+		WARN_ON(rc);
+	}
+
+	/* number_of_sets */
+	nr_sets = of_get_property(np, info->nr_sets_prop, NULL);
+	if (nr_sets) {
+		new->nr_sets = *nr_sets;
+		rc = sysfs_create_file(&new->kobj,
+				       &cache_nr_sets_attr.attr);
+		WARN_ON(rc);
+	}
+
+	/* ways_of_associativity */
+	if (new->nr_sets == 1) {
+		/* fully associative */
+		new->associativity = 0;
+		goto create_assoc;
+	}
+
+	if (new->nr_sets && new->size && new->line_size) {
+		/* If we have values for all of these we can derive
+		 * the associativity. */
+		new->associativity =
+			((new->size * 1024) / new->nr_sets) / new->line_size;
+create_assoc:
+		rc = sysfs_create_file(&new->kobj,
+				       &cache_assoc_attr.attr);
+		WARN_ON(rc);
+	}
+
+	return new;
+err:
+	kfree(new);
+	return NULL;
+}
+
+static bool cache_is_unified(struct device_node *np)
+{
+	return of_get_property(np, "cache-unified", NULL);
+}
+
+static struct cache_desc * __cpuinit create_cache_index_info(struct device_node *np, struct kobject *parent, int index, int level)
+{
+	const phandle *next_cache_phandle;
+	struct device_node *next_cache;
+	struct cache_desc *new, **end;
+
+	pr_debug("%s(node = %s, index = %d)\n", __func__, np->full_name, index);
+
+	if (cache_is_unified(np)) {
+		new = create_cache_desc(np, parent, index, level,
+					&ucache_info);
+	} else {
+		new = create_cache_desc(np, parent, index, level,
+					&dcache_info);
+		if (new) {
+			index++;
+			new->next = create_cache_desc(np, parent, index, level,
+						      &icache_info);
+		}
+	}
+	if (!new)
+		return NULL;
+
+	end = &new->next;
+	while (*end)
+		end = &(*end)->next;
+
+	next_cache_phandle = of_get_property(np, "l2-cache", NULL);
+	if (!next_cache_phandle)
+		goto out;
+
+	next_cache = of_find_node_by_phandle(*next_cache_phandle);
+	if (!next_cache)
+		goto out;
+
+	*end = create_cache_index_info(next_cache, parent, ++index, ++level);
+
+	of_node_put(next_cache);
+out:
+	return new;
+}
+
+static void __cpuinit create_cache_info(struct sys_device *sysdev)
+{
+	struct kobject *cache_toplevel;
+	struct device_node *np = NULL;
+	int cpu = sysdev->id;
+
+	cache_toplevel = kobject_create_and_add("cache", &sysdev->kobj);
+	if (!cache_toplevel)
+		return;
+	per_cpu(cache_toplevel, cpu) = cache_toplevel;
+	np = of_get_cpu_node(cpu, NULL);
+	if (np != NULL) {
+		per_cpu(cache_desc, cpu) =
+			create_cache_index_info(np, cache_toplevel, 0, 1);
+		of_node_put(np);
+	}
+	return;
+}
+
+static void __cpuinit register_cpu_online(unsigned int cpu)
 {
 	struct cpu *c = &per_cpu(cpu_devices, cpu);
 	struct sys_device *s = &c->sysdev;
@@ -339,9 +629,33 @@ static void register_cpu_online(unsigned int cpu)
 
 	if (cpu_has_feature(CPU_FTR_DSCR))
 		sysdev_create_file(s, &attr_dscr);
+
+	create_cache_info(s);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
+static void remove_cache_info(struct sys_device *sysdev)
+{
+	struct kobject *cache_toplevel;
+	struct cache_desc *cache_desc;
+	int cpu = sysdev->id;
+
+	cache_desc = per_cpu(cache_desc, cpu);
+	if (cache_desc != NULL) {
+		sysfs_remove_file(&cache_desc->kobj, &cache_size_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_line_size_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_type_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_level_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_nr_sets_attr.attr);
+		sysfs_remove_file(&cache_desc->kobj, &cache_assoc_attr.attr);
+
+		kobject_put(&cache_desc->kobj);
+	}
+	cache_toplevel = per_cpu(cache_toplevel, cpu);
+	if (cache_toplevel != NULL)
+		kobject_put(cache_toplevel);
+}
+
 static void unregister_cpu_online(unsigned int cpu)
 {
 	struct cpu *c = &per_cpu(cpu_devices, cpu);
@@ -392,6 +706,8 @@ static void unregister_cpu_online(unsigned int cpu)
 
 	if (cpu_has_feature(CPU_FTR_DSCR))
 		sysdev_remove_file(s, &attr_dscr);
+
+	remove_cache_info(s);
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 
@@ -522,7 +838,8 @@ static void register_nodes(void)
 #endif
 
 /* Only valid if CPU is present. */
-static ssize_t show_physical_id(struct sys_device *dev, char *buf)
+static ssize_t show_physical_id(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct cpu *cpu = container_of(dev, struct cpu, sysdev);
 
diff --git a/arch/powerpc/kernel/tau_6xx.c b/arch/powerpc/kernel/tau_6xx.c
index 368a4934f7ee..c3a56d65c5a9 100644
--- a/arch/powerpc/kernel/tau_6xx.c
+++ b/arch/powerpc/kernel/tau_6xx.c
@@ -192,7 +192,7 @@ static void tau_timeout_smp(unsigned long unused)
 
 	/* schedule ourselves to be run again */
 	mod_timer(&tau_timer, jiffies + shrink_timer) ;
-	on_each_cpu(tau_timeout, NULL, 1, 0);
+	on_each_cpu(tau_timeout, NULL, 0);
 }
 
 /*
@@ -234,7 +234,7 @@ int __init TAU_init(void)
 	tau_timer.expires = jiffies + shrink_timer;
 	add_timer(&tau_timer);
 
-	on_each_cpu(TAU_init_smp, NULL, 1, 0);
+	on_each_cpu(TAU_init_smp, NULL, 0);
 
 	printk("Thermal assist unit ");
 #ifdef CONFIG_TAU_INT
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 73401e83739a..e2ee66b5831d 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -129,7 +129,7 @@ static unsigned long __initdata iSeries_recal_titan;
 static signed long __initdata iSeries_recal_tb;
 
 /* Forward declaration is only needed for iSereis compiles */
-void __init clocksource_init(void);
+static void __init clocksource_init(void);
 #endif
 
 #define XSEC_PER_SEC (1024*1024)
@@ -150,8 +150,8 @@ u64 tb_to_xs;
 unsigned tb_to_us;
 
 #define TICKLEN_SCALE	NTP_SCALE_SHIFT
-u64 last_tick_len;	/* units are ns / 2^TICKLEN_SCALE */
-u64 ticklen_to_xs;	/* 0.64 fraction */
+static u64 last_tick_len;	/* units are ns / 2^TICKLEN_SCALE */
+static u64 ticklen_to_xs;	/* 0.64 fraction */
 
 /* If last_tick_len corresponds to about 1/HZ seconds, then
    last_tick_len << TICKLEN_SHIFT will be about 2^63. */
@@ -164,7 +164,7 @@ static u64 tb_to_ns_scale __read_mostly;
 static unsigned tb_to_ns_shift __read_mostly;
 static unsigned long boot_tb __read_mostly;
 
-struct gettimeofday_struct do_gtod;
+static struct gettimeofday_struct do_gtod;
 
 extern struct timezone sys_tz;
 static long timezone_offset;
@@ -322,7 +322,7 @@ void snapshot_timebases(void)
 {
 	if (!cpu_has_feature(CPU_FTR_PURR))
 		return;
-	on_each_cpu(snapshot_tb_and_purr, NULL, 0, 1);
+	on_each_cpu(snapshot_tb_and_purr, NULL, 1);
 }
 
 /*
@@ -742,10 +742,6 @@ void __init generic_calibrate_decr(void)
 	}
 
 #if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
-	/* Set the time base to zero */
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
 	/* Clear any pending timer interrupts */
 	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
 
@@ -832,7 +828,7 @@ void update_vsyscall_tz(void)
 	++vdso_data->tb_update_count;
 }
 
-void __init clocksource_init(void)
+static void __init clocksource_init(void)
 {
 	struct clocksource *clock;
 
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 4b5b7ff4f78b..81ccb8dd1a54 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -967,6 +967,20 @@ void altivec_unavailable_exception(struct pt_regs *regs)
 	die("Unrecoverable VMX/Altivec Unavailable Exception", regs, SIGABRT);
 }
 
+void vsx_unavailable_exception(struct pt_regs *regs)
+{
+	if (user_mode(regs)) {
+		/* A user program has executed an vsx instruction,
+		   but this kernel doesn't support vsx. */
+		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+		return;
+	}
+
+	printk(KERN_EMERG "Unrecoverable VSX Unavailable Exception "
+			"%lx at %lx\n", regs->trap, regs->nip);
+	die("Unrecoverable VSX Unavailable Exception", regs, SIGABRT);
+}
+
 void performance_monitor_exception(struct pt_regs *regs)
 {
 	perf_irq(regs);
@@ -1030,21 +1044,45 @@ void SoftwareEmulation(struct pt_regs *regs)
 
 #if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
 
-void DebugException(struct pt_regs *regs, unsigned long debug_status)
+void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status)
 {
 	if (debug_status & DBSR_IC) {	/* instruction completion */
 		regs->msr &= ~MSR_DE;
+
+		/* Disable instruction completion */
+		mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~DBCR0_IC);
+		/* Clear the instruction completion event */
+		mtspr(SPRN_DBSR, DBSR_IC);
+
+		if (notify_die(DIE_SSTEP, "single_step", regs, 5,
+			       5, SIGTRAP) == NOTIFY_STOP) {
+			return;
+		}
+
+		if (debugger_sstep(regs))
+			return;
+
 		if (user_mode(regs)) {
 			current->thread.dbcr0 &= ~DBCR0_IC;
+		}
+
+		_exception(SIGTRAP, regs, TRAP_TRACE, regs->nip);
+	} else if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) {
+		regs->msr &= ~MSR_DE;
+
+		if (user_mode(regs)) {
+			current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W |
+								DBCR0_IDM);
 		} else {
-			/* Disable instruction completion */
-			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~DBCR0_IC);
-			/* Clear the instruction completion event */
-			mtspr(SPRN_DBSR, DBSR_IC);
-			if (debugger_sstep(regs))
-				return;
+			/* Disable DAC interupts */
+			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R |
+						DBSR_DAC1W | DBCR0_IDM));
+
+			/* Clear the DAC event */
+			mtspr(SPRN_DBSR, (DBSR_DAC1R | DBSR_DAC1W));
 		}
-		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
+		/* Setup and send the trap to the handler */
+		do_dabr(regs, mfspr(SPRN_DAC1), debug_status);
 	}
 }
 #endif /* CONFIG_4xx || CONFIG_BOOKE */
@@ -1091,6 +1129,21 @@ void altivec_assist_exception(struct pt_regs *regs)
 }
 #endif /* CONFIG_ALTIVEC */
 
+#ifdef CONFIG_VSX
+void vsx_assist_exception(struct pt_regs *regs)
+{
+	if (!user_mode(regs)) {
+		printk(KERN_EMERG "VSX assist exception in kernel mode"
+		       " at %lx\n", regs->nip);
+		die("Kernel VSX assist exception", regs, SIGILL);
+	}
+
+	flush_vsx_to_thread(current);
+	printk(KERN_INFO "VSX assist not supported at %lx\n", regs->nip);
+	_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
+}
+#endif /* CONFIG_VSX */
+
 #ifdef CONFIG_FSL_BOOKE
 void CacheLockingException(struct pt_regs *regs, unsigned long address,
 			   unsigned long error_code)
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index ce245a850db2..65639a43e644 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -571,6 +571,11 @@ static __init int vdso_fixup_features(struct lib32_elfinfo *v32,
 	if (start64)
 		do_feature_fixups(powerpc_firmware_features,
 				  start64, start64 + size64);
+
+	start64 = find_section64(v64->hdr, "__lwsync_fixup", &size64);
+	if (start64)
+		do_lwsync_fixups(cur_cpu_spec->cpu_features,
+				 start64, start64 + size64);
 #endif /* CONFIG_PPC64 */
 
 	start32 = find_section32(v32->hdr, "__ftr_fixup", &size32);
@@ -585,6 +590,11 @@ static __init int vdso_fixup_features(struct lib32_elfinfo *v32,
 				  start32, start32 + size32);
 #endif /* CONFIG_PPC64 */
 
+	start32 = find_section32(v32->hdr, "__lwsync_fixup", &size32);
+	if (start32)
+		do_lwsync_fixups(cur_cpu_spec->cpu_features,
+				 start32, start32 + size32);
+
 	return 0;
 }
 
@@ -778,9 +788,7 @@ static int __init vdso_init(void)
 
 	return 0;
 }
-#ifdef CONFIG_PPC_MERGE
 arch_initcall(vdso_init);
-#endif
 
 int in_gate_area_no_task(unsigned long addr)
 {
diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S
index 9352ab5200e5..be3b6a41dc09 100644
--- a/arch/powerpc/kernel/vdso32/vdso32.lds.S
+++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S
@@ -24,7 +24,7 @@ SECTIONS
 
 	. = ALIGN(16);
 	.text		: {
-		*(.text .stub .text.* .gnu.linkonce.t.*)
+		*(.text .stub .text.* .gnu.linkonce.t.* __ftr_alt_*)
 	}
 	PROVIDE(__etext = .);
 	PROVIDE(_etext = .);
@@ -33,6 +33,9 @@ SECTIONS
 	. = ALIGN(8);
 	__ftr_fixup	: { *(__ftr_fixup) }
 
+	. = ALIGN(8);
+	__lwsync_fixup	: { *(__lwsync_fixup) }
+
 #ifdef CONFIG_PPC64
 	. = ALIGN(8);
 	__fw_ftr_fixup	: { *(__fw_ftr_fixup) }
diff --git a/arch/powerpc/kernel/vdso64/vdso64.lds.S b/arch/powerpc/kernel/vdso64/vdso64.lds.S
index 932b3fdb34b9..d0b2526dd38d 100644
--- a/arch/powerpc/kernel/vdso64/vdso64.lds.S
+++ b/arch/powerpc/kernel/vdso64/vdso64.lds.S
@@ -24,7 +24,7 @@ SECTIONS
 
 	. = ALIGN(16);
 	.text		: {
-		*(.text .stub .text.* .gnu.linkonce.t.*)
+		*(.text .stub .text.* .gnu.linkonce.t.* __ftr_alt_*)
 		*(.sfpr .glink)
 	}						:text
 	PROVIDE(__etext = .);
@@ -35,6 +35,9 @@ SECTIONS
 	__ftr_fixup	: { *(__ftr_fixup) }
 
 	. = ALIGN(8);
+	__lwsync_fixup	: { *(__lwsync_fixup) }
+
+	. = ALIGN(8);
 	__fw_ftr_fixup	: { *(__fw_ftr_fixup) }
 
 	/*
@@ -43,15 +46,15 @@ SECTIONS
 	.rodata		: { *(.rodata .rodata.* .gnu.linkonce.r.*) }
 	.rodata1	: { *(.rodata1) }
 
+	.dynamic	: { *(.dynamic) }		:text	:dynamic
+
 	.eh_frame_hdr	: { *(.eh_frame_hdr) }		:text	:eh_frame_hdr
 	.eh_frame	: { KEEP (*(.eh_frame)) }	:text
 	.gcc_except_table : { *(.gcc_except_table) }
+	.rela.dyn ALIGN(8) : { *(.rela.dyn) }
 
 	.opd ALIGN(8)	: { KEEP (*(.opd)) }
 	.got ALIGN(8)	: { *(.got .toc) }
-	.rela.dyn ALIGN(8) : { *(.rela.dyn) }
-
-	.dynamic	: { *(.dynamic) }		:text	:dynamic
 
 	_end = .;
 	PROVIDE(end = .);
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index b77f8af7ddde..22a3c33fd751 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -1,11 +1,12 @@
 /*
  * IBM PowerPC Virtual I/O Infrastructure Support.
  *
- *    Copyright (c) 2003-2005 IBM Corp.
+ *    Copyright (c) 2003,2008 IBM Corp.
  *     Dave Engebretsen engebret@us.ibm.com
  *     Santiago Leon santil@us.ibm.com
  *     Hollis Blanchard <hollisb@us.ibm.com>
  *     Stephen Rothwell
+ *     Robert Jennings <rcjenn@us.ibm.com>
  *
  *      This program is free software; you can redistribute it and/or
  *      modify it under the terms of the GNU General Public License
@@ -46,6 +47,996 @@ static struct vio_dev vio_bus_device  = { /* fake "parent" device */
 	.dev.bus = &vio_bus_type,
 };
 
+#ifdef CONFIG_PPC_SMLPAR
+/**
+ * vio_cmo_pool - A pool of IO memory for CMO use
+ *
+ * @size: The size of the pool in bytes
+ * @free: The amount of free memory in the pool
+ */
+struct vio_cmo_pool {
+	size_t size;
+	size_t free;
+};
+
+/* How many ms to delay queued balance work */
+#define VIO_CMO_BALANCE_DELAY 100
+
+/* Portion out IO memory to CMO devices by this chunk size */
+#define VIO_CMO_BALANCE_CHUNK 131072
+
+/**
+ * vio_cmo_dev_entry - A device that is CMO-enabled and requires entitlement
+ *
+ * @vio_dev: struct vio_dev pointer
+ * @list: pointer to other devices on bus that are being tracked
+ */
+struct vio_cmo_dev_entry {
+	struct vio_dev *viodev;
+	struct list_head list;
+};
+
+/**
+ * vio_cmo - VIO bus accounting structure for CMO entitlement
+ *
+ * @lock: spinlock for entire structure
+ * @balance_q: work queue for balancing system entitlement
+ * @device_list: list of CMO-enabled devices requiring entitlement
+ * @entitled: total system entitlement in bytes
+ * @reserve: pool of memory from which devices reserve entitlement, incl. spare
+ * @excess: pool of excess entitlement not needed for device reserves or spare
+ * @spare: IO memory for device hotplug functionality
+ * @min: minimum necessary for system operation
+ * @desired: desired memory for system operation
+ * @curr: bytes currently allocated
+ * @high: high water mark for IO data usage
+ */
+struct vio_cmo {
+	spinlock_t lock;
+	struct delayed_work balance_q;
+	struct list_head device_list;
+	size_t entitled;
+	struct vio_cmo_pool reserve;
+	struct vio_cmo_pool excess;
+	size_t spare;
+	size_t min;
+	size_t desired;
+	size_t curr;
+	size_t high;
+} vio_cmo;
+
+/**
+ * vio_cmo_OF_devices - Count the number of OF devices that have DMA windows
+ */
+static int vio_cmo_num_OF_devs(void)
+{
+	struct device_node *node_vroot;
+	int count = 0;
+
+	/*
+	 * Count the number of vdevice entries with an
+	 * ibm,my-dma-window OF property
+	 */
+	node_vroot = of_find_node_by_name(NULL, "vdevice");
+	if (node_vroot) {
+		struct device_node *of_node;
+		struct property *prop;
+
+		for_each_child_of_node(node_vroot, of_node) {
+			prop = of_find_property(of_node, "ibm,my-dma-window",
+			                       NULL);
+			if (prop)
+				count++;
+		}
+	}
+	of_node_put(node_vroot);
+	return count;
+}
+
+/**
+ * vio_cmo_alloc - allocate IO memory for CMO-enable devices
+ *
+ * @viodev: VIO device requesting IO memory
+ * @size: size of allocation requested
+ *
+ * Allocations come from memory reserved for the devices and any excess
+ * IO memory available to all devices.  The spare pool used to service
+ * hotplug must be equal to %VIO_CMO_MIN_ENT for the excess pool to be
+ * made available.
+ *
+ * Return codes:
+ *  0 for successful allocation and -ENOMEM for a failure
+ */
+static inline int vio_cmo_alloc(struct vio_dev *viodev, size_t size)
+{
+	unsigned long flags;
+	size_t reserve_free = 0;
+	size_t excess_free = 0;
+	int ret = -ENOMEM;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+
+	/* Determine the amount of free entitlement available in reserve */
+	if (viodev->cmo.entitled > viodev->cmo.allocated)
+		reserve_free = viodev->cmo.entitled - viodev->cmo.allocated;
+
+	/* If spare is not fulfilled, the excess pool can not be used. */
+	if (vio_cmo.spare >= VIO_CMO_MIN_ENT)
+		excess_free = vio_cmo.excess.free;
+
+	/* The request can be satisfied */
+	if ((reserve_free + excess_free) >= size) {
+		vio_cmo.curr += size;
+		if (vio_cmo.curr > vio_cmo.high)
+			vio_cmo.high = vio_cmo.curr;
+		viodev->cmo.allocated += size;
+		size -= min(reserve_free, size);
+		vio_cmo.excess.free -= size;
+		ret = 0;
+	}
+
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+	return ret;
+}
+
+/**
+ * vio_cmo_dealloc - deallocate IO memory from CMO-enable devices
+ * @viodev: VIO device freeing IO memory
+ * @size: size of deallocation
+ *
+ * IO memory is freed by the device back to the correct memory pools.
+ * The spare pool is replenished first from either memory pool, then
+ * the reserve pool is used to reduce device entitlement, the excess
+ * pool is used to increase the reserve pool toward the desired entitlement
+ * target, and then the remaining memory is returned to the pools.
+ *
+ */
+static inline void vio_cmo_dealloc(struct vio_dev *viodev, size_t size)
+{
+	unsigned long flags;
+	size_t spare_needed = 0;
+	size_t excess_freed = 0;
+	size_t reserve_freed = size;
+	size_t tmp;
+	int balance = 0;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	vio_cmo.curr -= size;
+
+	/* Amount of memory freed from the excess pool */
+	if (viodev->cmo.allocated > viodev->cmo.entitled) {
+		excess_freed = min(reserve_freed, (viodev->cmo.allocated -
+		                                   viodev->cmo.entitled));
+		reserve_freed -= excess_freed;
+	}
+
+	/* Remove allocation from device */
+	viodev->cmo.allocated -= (reserve_freed + excess_freed);
+
+	/* Spare is a subset of the reserve pool, replenish it first. */
+	spare_needed = VIO_CMO_MIN_ENT - vio_cmo.spare;
+
+	/*
+	 * Replenish the spare in the reserve pool from the excess pool.
+	 * This moves entitlement into the reserve pool.
+	 */
+	if (spare_needed && excess_freed) {
+		tmp = min(excess_freed, spare_needed);
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.reserve.size += tmp;
+		vio_cmo.spare += tmp;
+		excess_freed -= tmp;
+		spare_needed -= tmp;
+		balance = 1;
+	}
+
+	/*
+	 * Replenish the spare in the reserve pool from the reserve pool.
+	 * This removes entitlement from the device down to VIO_CMO_MIN_ENT,
+	 * if needed, and gives it to the spare pool. The amount of used
+	 * memory in this pool does not change.
+	 */
+	if (spare_needed && reserve_freed) {
+		tmp = min(spare_needed, min(reserve_freed,
+		                            (viodev->cmo.entitled -
+		                             VIO_CMO_MIN_ENT)));
+
+		vio_cmo.spare += tmp;
+		viodev->cmo.entitled -= tmp;
+		reserve_freed -= tmp;
+		spare_needed -= tmp;
+		balance = 1;
+	}
+
+	/*
+	 * Increase the reserve pool until the desired allocation is met.
+	 * Move an allocation freed from the excess pool into the reserve
+	 * pool and schedule a balance operation.
+	 */
+	if (excess_freed && (vio_cmo.desired > vio_cmo.reserve.size)) {
+		tmp = min(excess_freed, (vio_cmo.desired - vio_cmo.reserve.size));
+
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.reserve.size += tmp;
+		excess_freed -= tmp;
+		balance = 1;
+	}
+
+	/* Return memory from the excess pool to that pool */
+	if (excess_freed)
+		vio_cmo.excess.free += excess_freed;
+
+	if (balance)
+		schedule_delayed_work(&vio_cmo.balance_q, VIO_CMO_BALANCE_DELAY);
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+/**
+ * vio_cmo_entitlement_update - Manage system entitlement changes
+ *
+ * @new_entitlement: new system entitlement to attempt to accommodate
+ *
+ * Increases in entitlement will be used to fulfill the spare entitlement
+ * and the rest is given to the excess pool.  Decreases, if they are
+ * possible, come from the excess pool and from unused device entitlement
+ *
+ * Returns: 0 on success, -ENOMEM when change can not be made
+ */
+int vio_cmo_entitlement_update(size_t new_entitlement)
+{
+	struct vio_dev *viodev;
+	struct vio_cmo_dev_entry *dev_ent;
+	unsigned long flags;
+	size_t avail, delta, tmp;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+
+	/* Entitlement increases */
+	if (new_entitlement > vio_cmo.entitled) {
+		delta = new_entitlement - vio_cmo.entitled;
+
+		/* Fulfill spare allocation */
+		if (vio_cmo.spare < VIO_CMO_MIN_ENT) {
+			tmp = min(delta, (VIO_CMO_MIN_ENT - vio_cmo.spare));
+			vio_cmo.spare += tmp;
+			vio_cmo.reserve.size += tmp;
+			delta -= tmp;
+		}
+
+		/* Remaining new allocation goes to the excess pool */
+		vio_cmo.entitled += delta;
+		vio_cmo.excess.size += delta;
+		vio_cmo.excess.free += delta;
+
+		goto out;
+	}
+
+	/* Entitlement decreases */
+	delta = vio_cmo.entitled - new_entitlement;
+	avail = vio_cmo.excess.free;
+
+	/*
+	 * Need to check how much unused entitlement each device can
+	 * sacrifice to fulfill entitlement change.
+	 */
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+		if (avail >= delta)
+			break;
+
+		viodev = dev_ent->viodev;
+		if ((viodev->cmo.entitled > viodev->cmo.allocated) &&
+		    (viodev->cmo.entitled > VIO_CMO_MIN_ENT))
+				avail += viodev->cmo.entitled -
+				         max_t(size_t, viodev->cmo.allocated,
+				               VIO_CMO_MIN_ENT);
+	}
+
+	if (delta <= avail) {
+		vio_cmo.entitled -= delta;
+
+		/* Take entitlement from the excess pool first */
+		tmp = min(vio_cmo.excess.free, delta);
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.excess.free -= tmp;
+		delta -= tmp;
+
+		/*
+		 * Remove all but VIO_CMO_MIN_ENT bytes from devices
+		 * until entitlement change is served
+		 */
+		list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+			if (!delta)
+				break;
+
+			viodev = dev_ent->viodev;
+			tmp = 0;
+			if ((viodev->cmo.entitled > viodev->cmo.allocated) &&
+			    (viodev->cmo.entitled > VIO_CMO_MIN_ENT))
+				tmp = viodev->cmo.entitled -
+				      max_t(size_t, viodev->cmo.allocated,
+				            VIO_CMO_MIN_ENT);
+			viodev->cmo.entitled -= min(tmp, delta);
+			delta -= min(tmp, delta);
+		}
+	} else {
+		spin_unlock_irqrestore(&vio_cmo.lock, flags);
+		return -ENOMEM;
+	}
+
+out:
+	schedule_delayed_work(&vio_cmo.balance_q, 0);
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+	return 0;
+}
+
+/**
+ * vio_cmo_balance - Balance entitlement among devices
+ *
+ * @work: work queue structure for this operation
+ *
+ * Any system entitlement above the minimum needed for devices, or
+ * already allocated to devices, can be distributed to the devices.
+ * The list of devices is iterated through to recalculate the desired
+ * entitlement level and to determine how much entitlement above the
+ * minimum entitlement is allocated to devices.
+ *
+ * Small chunks of the available entitlement are given to devices until
+ * their requirements are fulfilled or there is no entitlement left to give.
+ * Upon completion sizes of the reserve and excess pools are calculated.
+ *
+ * The system minimum entitlement level is also recalculated here.
+ * Entitlement will be reserved for devices even after vio_bus_remove to
+ * accommodate reloading the driver.  The OF tree is walked to count the
+ * number of devices present and this will remove entitlement for devices
+ * that have actually left the system after having vio_bus_remove called.
+ */
+static void vio_cmo_balance(struct work_struct *work)
+{
+	struct vio_cmo *cmo;
+	struct vio_dev *viodev;
+	struct vio_cmo_dev_entry *dev_ent;
+	unsigned long flags;
+	size_t avail = 0, level, chunk, need;
+	int devcount = 0, fulfilled;
+
+	cmo = container_of(work, struct vio_cmo, balance_q.work);
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+
+	/* Calculate minimum entitlement and fulfill spare */
+	cmo->min = vio_cmo_num_OF_devs() * VIO_CMO_MIN_ENT;
+	BUG_ON(cmo->min > cmo->entitled);
+	cmo->spare = min_t(size_t, VIO_CMO_MIN_ENT, (cmo->entitled - cmo->min));
+	cmo->min += cmo->spare;
+	cmo->desired = cmo->min;
+
+	/*
+	 * Determine how much entitlement is available and reset device
+	 * entitlements
+	 */
+	avail = cmo->entitled - cmo->spare;
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+		viodev = dev_ent->viodev;
+		devcount++;
+		viodev->cmo.entitled = VIO_CMO_MIN_ENT;
+		cmo->desired += (viodev->cmo.desired - VIO_CMO_MIN_ENT);
+		avail -= max_t(size_t, viodev->cmo.allocated, VIO_CMO_MIN_ENT);
+	}
+
+	/*
+	 * Having provided each device with the minimum entitlement, loop
+	 * over the devices portioning out the remaining entitlement
+	 * until there is nothing left.
+	 */
+	level = VIO_CMO_MIN_ENT;
+	while (avail) {
+		fulfilled = 0;
+		list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+			viodev = dev_ent->viodev;
+
+			if (viodev->cmo.desired <= level) {
+				fulfilled++;
+				continue;
+			}
+
+			/*
+			 * Give the device up to VIO_CMO_BALANCE_CHUNK
+			 * bytes of entitlement, but do not exceed the
+			 * desired level of entitlement for the device.
+			 */
+			chunk = min_t(size_t, avail, VIO_CMO_BALANCE_CHUNK);
+			chunk = min(chunk, (viodev->cmo.desired -
+			                    viodev->cmo.entitled));
+			viodev->cmo.entitled += chunk;
+
+			/*
+			 * If the memory for this entitlement increase was
+			 * already allocated to the device it does not come
+			 * from the available pool being portioned out.
+			 */
+			need = max(viodev->cmo.allocated, viodev->cmo.entitled)-
+			       max(viodev->cmo.allocated, level);
+			avail -= need;
+
+		}
+		if (fulfilled == devcount)
+			break;
+		level += VIO_CMO_BALANCE_CHUNK;
+	}
+
+	/* Calculate new reserve and excess pool sizes */
+	cmo->reserve.size = cmo->min;
+	cmo->excess.free = 0;
+	cmo->excess.size = 0;
+	need = 0;
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list) {
+		viodev = dev_ent->viodev;
+		/* Calculated reserve size above the minimum entitlement */
+		if (viodev->cmo.entitled)
+			cmo->reserve.size += (viodev->cmo.entitled -
+			                      VIO_CMO_MIN_ENT);
+		/* Calculated used excess entitlement */
+		if (viodev->cmo.allocated > viodev->cmo.entitled)
+			need += viodev->cmo.allocated - viodev->cmo.entitled;
+	}
+	cmo->excess.size = cmo->entitled - cmo->reserve.size;
+	cmo->excess.free = cmo->excess.size - need;
+
+	cancel_delayed_work(container_of(work, struct delayed_work, work));
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+static void *vio_dma_iommu_alloc_coherent(struct device *dev, size_t size,
+                                          dma_addr_t *dma_handle, gfp_t flag)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	void *ret;
+
+	if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) {
+		atomic_inc(&viodev->cmo.allocs_failed);
+		return NULL;
+	}
+
+	ret = dma_iommu_ops.alloc_coherent(dev, size, dma_handle, flag);
+	if (unlikely(ret == NULL)) {
+		vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+		atomic_inc(&viodev->cmo.allocs_failed);
+	}
+
+	return ret;
+}
+
+static void vio_dma_iommu_free_coherent(struct device *dev, size_t size,
+                                        void *vaddr, dma_addr_t dma_handle)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+
+	dma_iommu_ops.free_coherent(dev, size, vaddr, dma_handle);
+
+	vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+}
+
+static dma_addr_t vio_dma_iommu_map_single(struct device *dev, void *vaddr,
+                                           size_t size,
+                                           enum dma_data_direction direction,
+                                           struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	dma_addr_t ret = DMA_ERROR_CODE;
+
+	if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) {
+		atomic_inc(&viodev->cmo.allocs_failed);
+		return ret;
+	}
+
+	ret = dma_iommu_ops.map_single(dev, vaddr, size, direction, attrs);
+	if (unlikely(dma_mapping_error(dev, ret))) {
+		vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+		atomic_inc(&viodev->cmo.allocs_failed);
+	}
+
+	return ret;
+}
+
+static void vio_dma_iommu_unmap_single(struct device *dev,
+		dma_addr_t dma_handle, size_t size,
+		enum dma_data_direction direction,
+		struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+
+	dma_iommu_ops.unmap_single(dev, dma_handle, size, direction, attrs);
+
+	vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE));
+}
+
+static int vio_dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist,
+                                int nelems, enum dma_data_direction direction,
+                                struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	struct scatterlist *sgl;
+	int ret, count = 0;
+	size_t alloc_size = 0;
+
+	for (sgl = sglist; count < nelems; count++, sgl++)
+		alloc_size += roundup(sgl->length, IOMMU_PAGE_SIZE);
+
+	if (vio_cmo_alloc(viodev, alloc_size)) {
+		atomic_inc(&viodev->cmo.allocs_failed);
+		return 0;
+	}
+
+	ret = dma_iommu_ops.map_sg(dev, sglist, nelems, direction, attrs);
+
+	if (unlikely(!ret)) {
+		vio_cmo_dealloc(viodev, alloc_size);
+		atomic_inc(&viodev->cmo.allocs_failed);
+	}
+
+	for (sgl = sglist, count = 0; count < ret; count++, sgl++)
+		alloc_size -= roundup(sgl->dma_length, IOMMU_PAGE_SIZE);
+	if (alloc_size)
+		vio_cmo_dealloc(viodev, alloc_size);
+
+	return ret;
+}
+
+static void vio_dma_iommu_unmap_sg(struct device *dev,
+		struct scatterlist *sglist, int nelems,
+		enum dma_data_direction direction,
+		struct dma_attrs *attrs)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	struct scatterlist *sgl;
+	size_t alloc_size = 0;
+	int count = 0;
+
+	for (sgl = sglist; count < nelems; count++, sgl++)
+		alloc_size += roundup(sgl->dma_length, IOMMU_PAGE_SIZE);
+
+	dma_iommu_ops.unmap_sg(dev, sglist, nelems, direction, attrs);
+
+	vio_cmo_dealloc(viodev, alloc_size);
+}
+
+struct dma_mapping_ops vio_dma_mapping_ops = {
+	.alloc_coherent = vio_dma_iommu_alloc_coherent,
+	.free_coherent  = vio_dma_iommu_free_coherent,
+	.map_single     = vio_dma_iommu_map_single,
+	.unmap_single   = vio_dma_iommu_unmap_single,
+	.map_sg         = vio_dma_iommu_map_sg,
+	.unmap_sg       = vio_dma_iommu_unmap_sg,
+};
+
+/**
+ * vio_cmo_set_dev_desired - Set desired entitlement for a device
+ *
+ * @viodev: struct vio_dev for device to alter
+ * @new_desired: new desired entitlement level in bytes
+ *
+ * For use by devices to request a change to their entitlement at runtime or
+ * through sysfs.  The desired entitlement level is changed and a balancing
+ * of system resources is scheduled to run in the future.
+ */
+void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired)
+{
+	unsigned long flags;
+	struct vio_cmo_dev_entry *dev_ent;
+	int found = 0;
+
+	if (!firmware_has_feature(FW_FEATURE_CMO))
+		return;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	if (desired < VIO_CMO_MIN_ENT)
+		desired = VIO_CMO_MIN_ENT;
+
+	/*
+	 * Changes will not be made for devices not in the device list.
+	 * If it is not in the device list, then no driver is loaded
+	 * for the device and it can not receive entitlement.
+	 */
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list)
+		if (viodev == dev_ent->viodev) {
+			found = 1;
+			break;
+		}
+	if (!found)
+		return;
+
+	/* Increase/decrease in desired device entitlement */
+	if (desired >= viodev->cmo.desired) {
+		/* Just bump the bus and device values prior to a balance*/
+		vio_cmo.desired += desired - viodev->cmo.desired;
+		viodev->cmo.desired = desired;
+	} else {
+		/* Decrease bus and device values for desired entitlement */
+		vio_cmo.desired -= viodev->cmo.desired - desired;
+		viodev->cmo.desired = desired;
+		/*
+		 * If less entitlement is desired than current entitlement, move
+		 * any reserve memory in the change region to the excess pool.
+		 */
+		if (viodev->cmo.entitled > desired) {
+			vio_cmo.reserve.size -= viodev->cmo.entitled - desired;
+			vio_cmo.excess.size += viodev->cmo.entitled - desired;
+			/*
+			 * If entitlement moving from the reserve pool to the
+			 * excess pool is currently unused, add to the excess
+			 * free counter.
+			 */
+			if (viodev->cmo.allocated < viodev->cmo.entitled)
+				vio_cmo.excess.free += viodev->cmo.entitled -
+				                       max(viodev->cmo.allocated, desired);
+			viodev->cmo.entitled = desired;
+		}
+	}
+	schedule_delayed_work(&vio_cmo.balance_q, 0);
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+/**
+ * vio_cmo_bus_probe - Handle CMO specific bus probe activities
+ *
+ * @viodev - Pointer to struct vio_dev for device
+ *
+ * Determine the devices IO memory entitlement needs, attempting
+ * to satisfy the system minimum entitlement at first and scheduling
+ * a balance operation to take care of the rest at a later time.
+ *
+ * Returns: 0 on success, -EINVAL when device doesn't support CMO, and
+ *          -ENOMEM when entitlement is not available for device or
+ *          device entry.
+ *
+ */
+static int vio_cmo_bus_probe(struct vio_dev *viodev)
+{
+	struct vio_cmo_dev_entry *dev_ent;
+	struct device *dev = &viodev->dev;
+	struct vio_driver *viodrv = to_vio_driver(dev->driver);
+	unsigned long flags;
+	size_t size;
+
+	/*
+	 * Check to see that device has a DMA window and configure
+	 * entitlement for the device.
+	 */
+	if (of_get_property(viodev->dev.archdata.of_node,
+	                    "ibm,my-dma-window", NULL)) {
+		/* Check that the driver is CMO enabled and get desired DMA */
+		if (!viodrv->get_desired_dma) {
+			dev_err(dev, "%s: device driver does not support CMO\n",
+			        __func__);
+			return -EINVAL;
+		}
+
+		viodev->cmo.desired = IOMMU_PAGE_ALIGN(viodrv->get_desired_dma(viodev));
+		if (viodev->cmo.desired < VIO_CMO_MIN_ENT)
+			viodev->cmo.desired = VIO_CMO_MIN_ENT;
+		size = VIO_CMO_MIN_ENT;
+
+		dev_ent = kmalloc(sizeof(struct vio_cmo_dev_entry),
+		                  GFP_KERNEL);
+		if (!dev_ent)
+			return -ENOMEM;
+
+		dev_ent->viodev = viodev;
+		spin_lock_irqsave(&vio_cmo.lock, flags);
+		list_add(&dev_ent->list, &vio_cmo.device_list);
+	} else {
+		viodev->cmo.desired = 0;
+		size = 0;
+		spin_lock_irqsave(&vio_cmo.lock, flags);
+	}
+
+	/*
+	 * If the needs for vio_cmo.min have not changed since they
+	 * were last set, the number of devices in the OF tree has
+	 * been constant and the IO memory for this is already in
+	 * the reserve pool.
+	 */
+	if (vio_cmo.min == ((vio_cmo_num_OF_devs() + 1) *
+	                    VIO_CMO_MIN_ENT)) {
+		/* Updated desired entitlement if device requires it */
+		if (size)
+			vio_cmo.desired += (viodev->cmo.desired -
+		                        VIO_CMO_MIN_ENT);
+	} else {
+		size_t tmp;
+
+		tmp = vio_cmo.spare + vio_cmo.excess.free;
+		if (tmp < size) {
+			dev_err(dev, "%s: insufficient free "
+			        "entitlement to add device. "
+			        "Need %lu, have %lu\n", __func__,
+				size, (vio_cmo.spare + tmp));
+			spin_unlock_irqrestore(&vio_cmo.lock, flags);
+			return -ENOMEM;
+		}
+
+		/* Use excess pool first to fulfill request */
+		tmp = min(size, vio_cmo.excess.free);
+		vio_cmo.excess.free -= tmp;
+		vio_cmo.excess.size -= tmp;
+		vio_cmo.reserve.size += tmp;
+
+		/* Use spare if excess pool was insufficient */
+		vio_cmo.spare -= size - tmp;
+
+		/* Update bus accounting */
+		vio_cmo.min += size;
+		vio_cmo.desired += viodev->cmo.desired;
+	}
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+	return 0;
+}
+
+/**
+ * vio_cmo_bus_remove - Handle CMO specific bus removal activities
+ *
+ * @viodev - Pointer to struct vio_dev for device
+ *
+ * Remove the device from the cmo device list.  The minimum entitlement
+ * will be reserved for the device as long as it is in the system.  The
+ * rest of the entitlement the device had been allocated will be returned
+ * to the system.
+ */
+static void vio_cmo_bus_remove(struct vio_dev *viodev)
+{
+	struct vio_cmo_dev_entry *dev_ent;
+	unsigned long flags;
+	size_t tmp;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	if (viodev->cmo.allocated) {
+		dev_err(&viodev->dev, "%s: device had %lu bytes of IO "
+		        "allocated after remove operation.\n",
+		        __func__, viodev->cmo.allocated);
+		BUG();
+	}
+
+	/*
+	 * Remove the device from the device list being maintained for
+	 * CMO enabled devices.
+	 */
+	list_for_each_entry(dev_ent, &vio_cmo.device_list, list)
+		if (viodev == dev_ent->viodev) {
+			list_del(&dev_ent->list);
+			kfree(dev_ent);
+			break;
+		}
+
+	/*
+	 * Devices may not require any entitlement and they do not need
+	 * to be processed.  Otherwise, return the device's entitlement
+	 * back to the pools.
+	 */
+	if (viodev->cmo.entitled) {
+		/*
+		 * This device has not yet left the OF tree, it's
+		 * minimum entitlement remains in vio_cmo.min and
+		 * vio_cmo.desired
+		 */
+		vio_cmo.desired -= (viodev->cmo.desired - VIO_CMO_MIN_ENT);
+
+		/*
+		 * Save min allocation for device in reserve as long
+		 * as it exists in OF tree as determined by later
+		 * balance operation
+		 */
+		viodev->cmo.entitled -= VIO_CMO_MIN_ENT;
+
+		/* Replenish spare from freed reserve pool */
+		if (viodev->cmo.entitled && (vio_cmo.spare < VIO_CMO_MIN_ENT)) {
+			tmp = min(viodev->cmo.entitled, (VIO_CMO_MIN_ENT -
+			                                 vio_cmo.spare));
+			vio_cmo.spare += tmp;
+			viodev->cmo.entitled -= tmp;
+		}
+
+		/* Remaining reserve goes to excess pool */
+		vio_cmo.excess.size += viodev->cmo.entitled;
+		vio_cmo.excess.free += viodev->cmo.entitled;
+		vio_cmo.reserve.size -= viodev->cmo.entitled;
+
+		/*
+		 * Until the device is removed it will keep a
+		 * minimum entitlement; this will guarantee that
+		 * a module unload/load will result in a success.
+		 */
+		viodev->cmo.entitled = VIO_CMO_MIN_ENT;
+		viodev->cmo.desired = VIO_CMO_MIN_ENT;
+		atomic_set(&viodev->cmo.allocs_failed, 0);
+	}
+
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+}
+
+static void vio_cmo_set_dma_ops(struct vio_dev *viodev)
+{
+	vio_dma_mapping_ops.dma_supported = dma_iommu_ops.dma_supported;
+	viodev->dev.archdata.dma_ops = &vio_dma_mapping_ops;
+}
+
+/**
+ * vio_cmo_bus_init - CMO entitlement initialization at bus init time
+ *
+ * Set up the reserve and excess entitlement pools based on available
+ * system entitlement and the number of devices in the OF tree that
+ * require entitlement in the reserve pool.
+ */
+static void vio_cmo_bus_init(void)
+{
+	struct hvcall_mpp_data mpp_data;
+	int err;
+
+	memset(&vio_cmo, 0, sizeof(struct vio_cmo));
+	spin_lock_init(&vio_cmo.lock);
+	INIT_LIST_HEAD(&vio_cmo.device_list);
+	INIT_DELAYED_WORK(&vio_cmo.balance_q, vio_cmo_balance);
+
+	/* Get current system entitlement */
+	err = h_get_mpp(&mpp_data);
+
+	/*
+	 * On failure, continue with entitlement set to 0, will panic()
+	 * later when spare is reserved.
+	 */
+	if (err != H_SUCCESS) {
+		printk(KERN_ERR "%s: unable to determine system IO "\
+		       "entitlement. (%d)\n", __func__, err);
+		vio_cmo.entitled = 0;
+	} else {
+		vio_cmo.entitled = mpp_data.entitled_mem;
+	}
+
+	/* Set reservation and check against entitlement */
+	vio_cmo.spare = VIO_CMO_MIN_ENT;
+	vio_cmo.reserve.size = vio_cmo.spare;
+	vio_cmo.reserve.size += (vio_cmo_num_OF_devs() *
+	                         VIO_CMO_MIN_ENT);
+	if (vio_cmo.reserve.size > vio_cmo.entitled) {
+		printk(KERN_ERR "%s: insufficient system entitlement\n",
+		       __func__);
+		panic("%s: Insufficient system entitlement", __func__);
+	}
+
+	/* Set the remaining accounting variables */
+	vio_cmo.excess.size = vio_cmo.entitled - vio_cmo.reserve.size;
+	vio_cmo.excess.free = vio_cmo.excess.size;
+	vio_cmo.min = vio_cmo.reserve.size;
+	vio_cmo.desired = vio_cmo.reserve.size;
+}
+
+/* sysfs device functions and data structures for CMO */
+
+#define viodev_cmo_rd_attr(name)                                        \
+static ssize_t viodev_cmo_##name##_show(struct device *dev,             \
+                                        struct device_attribute *attr,  \
+                                         char *buf)                     \
+{                                                                       \
+	return sprintf(buf, "%lu\n", to_vio_dev(dev)->cmo.name);        \
+}
+
+static ssize_t viodev_cmo_allocs_failed_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	return sprintf(buf, "%d\n", atomic_read(&viodev->cmo.allocs_failed));
+}
+
+static ssize_t viodev_cmo_allocs_failed_reset(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	atomic_set(&viodev->cmo.allocs_failed, 0);
+	return count;
+}
+
+static ssize_t viodev_cmo_desired_set(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct vio_dev *viodev = to_vio_dev(dev);
+	size_t new_desired;
+	int ret;
+
+	ret = strict_strtoul(buf, 10, &new_desired);
+	if (ret)
+		return ret;
+
+	vio_cmo_set_dev_desired(viodev, new_desired);
+	return count;
+}
+
+viodev_cmo_rd_attr(desired);
+viodev_cmo_rd_attr(entitled);
+viodev_cmo_rd_attr(allocated);
+
+static ssize_t name_show(struct device *, struct device_attribute *, char *);
+static ssize_t devspec_show(struct device *, struct device_attribute *, char *);
+static struct device_attribute vio_cmo_dev_attrs[] = {
+	__ATTR_RO(name),
+	__ATTR_RO(devspec),
+	__ATTR(cmo_desired,       S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+	       viodev_cmo_desired_show, viodev_cmo_desired_set),
+	__ATTR(cmo_entitled,      S_IRUGO, viodev_cmo_entitled_show,      NULL),
+	__ATTR(cmo_allocated,     S_IRUGO, viodev_cmo_allocated_show,     NULL),
+	__ATTR(cmo_allocs_failed, S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+	       viodev_cmo_allocs_failed_show, viodev_cmo_allocs_failed_reset),
+	__ATTR_NULL
+};
+
+/* sysfs bus functions and data structures for CMO */
+
+#define viobus_cmo_rd_attr(name)                                        \
+static ssize_t                                                          \
+viobus_cmo_##name##_show(struct bus_type *bt, char *buf)                \
+{                                                                       \
+	return sprintf(buf, "%lu\n", vio_cmo.name);                     \
+}
+
+#define viobus_cmo_pool_rd_attr(name, var)                              \
+static ssize_t                                                          \
+viobus_cmo_##name##_pool_show_##var(struct bus_type *bt, char *buf)     \
+{                                                                       \
+	return sprintf(buf, "%lu\n", vio_cmo.name.var);                 \
+}
+
+static ssize_t viobus_cmo_high_reset(struct bus_type *bt, const char *buf,
+                                     size_t count)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&vio_cmo.lock, flags);
+	vio_cmo.high = vio_cmo.curr;
+	spin_unlock_irqrestore(&vio_cmo.lock, flags);
+
+	return count;
+}
+
+viobus_cmo_rd_attr(entitled);
+viobus_cmo_pool_rd_attr(reserve, size);
+viobus_cmo_pool_rd_attr(excess, size);
+viobus_cmo_pool_rd_attr(excess, free);
+viobus_cmo_rd_attr(spare);
+viobus_cmo_rd_attr(min);
+viobus_cmo_rd_attr(desired);
+viobus_cmo_rd_attr(curr);
+viobus_cmo_rd_attr(high);
+
+static struct bus_attribute vio_cmo_bus_attrs[] = {
+	__ATTR(cmo_entitled, S_IRUGO, viobus_cmo_entitled_show, NULL),
+	__ATTR(cmo_reserve_size, S_IRUGO, viobus_cmo_reserve_pool_show_size, NULL),
+	__ATTR(cmo_excess_size, S_IRUGO, viobus_cmo_excess_pool_show_size, NULL),
+	__ATTR(cmo_excess_free, S_IRUGO, viobus_cmo_excess_pool_show_free, NULL),
+	__ATTR(cmo_spare,   S_IRUGO, viobus_cmo_spare_show,   NULL),
+	__ATTR(cmo_min,     S_IRUGO, viobus_cmo_min_show,     NULL),
+	__ATTR(cmo_desired, S_IRUGO, viobus_cmo_desired_show, NULL),
+	__ATTR(cmo_curr,    S_IRUGO, viobus_cmo_curr_show,    NULL),
+	__ATTR(cmo_high,    S_IWUSR|S_IRUSR|S_IWGRP|S_IRGRP|S_IROTH,
+	       viobus_cmo_high_show, viobus_cmo_high_reset),
+	__ATTR_NULL
+};
+
+static void vio_cmo_sysfs_init(void)
+{
+	vio_bus_type.dev_attrs = vio_cmo_dev_attrs;
+	vio_bus_type.bus_attrs = vio_cmo_bus_attrs;
+}
+#else /* CONFIG_PPC_SMLPAR */
+/* Dummy functions for iSeries platform */
+int vio_cmo_entitlement_update(size_t new_entitlement) { return 0; }
+void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired) {}
+static int vio_cmo_bus_probe(struct vio_dev *viodev) { return 0; }
+static void vio_cmo_bus_remove(struct vio_dev *viodev) {}
+static void vio_cmo_set_dma_ops(struct vio_dev *viodev) {}
+static void vio_cmo_bus_init(void) {}
+static void vio_cmo_sysfs_init(void) { }
+#endif /* CONFIG_PPC_SMLPAR */
+EXPORT_SYMBOL(vio_cmo_entitlement_update);
+EXPORT_SYMBOL(vio_cmo_set_dev_desired);
+
 static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev)
 {
 	const unsigned char *dma_window;
@@ -114,8 +1105,17 @@ static int vio_bus_probe(struct device *dev)
 		return error;
 
 	id = vio_match_device(viodrv->id_table, viodev);
-	if (id)
+	if (id) {
+		memset(&viodev->cmo, 0, sizeof(viodev->cmo));
+		if (firmware_has_feature(FW_FEATURE_CMO)) {
+			error = vio_cmo_bus_probe(viodev);
+			if (error)
+				return error;
+		}
 		error = viodrv->probe(viodev, id);
+		if (error)
+			vio_cmo_bus_remove(viodev);
+	}
 
 	return error;
 }
@@ -125,12 +1125,23 @@ static int vio_bus_remove(struct device *dev)
 {
 	struct vio_dev *viodev = to_vio_dev(dev);
 	struct vio_driver *viodrv = to_vio_driver(dev->driver);
+	struct device *devptr;
+	int ret = 1;
+
+	/*
+	 * Hold a reference to the device after the remove function is called
+	 * to allow for CMO accounting cleanup for the device.
+	 */
+	devptr = get_device(dev);
 
 	if (viodrv->remove)
-		return viodrv->remove(viodev);
+		ret = viodrv->remove(viodev);
+
+	if (!ret && firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_bus_remove(viodev);
 
-	/* driver can't remove */
-	return 1;
+	put_device(devptr);
+	return ret;
 }
 
 /**
@@ -215,7 +1226,11 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
 			viodev->unit_address = *unit_address;
 	}
 	viodev->dev.archdata.of_node = of_node_get(of_node);
-	viodev->dev.archdata.dma_ops = &dma_iommu_ops;
+
+	if (firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_set_dma_ops(viodev);
+	else
+		viodev->dev.archdata.dma_ops = &dma_iommu_ops;
 	viodev->dev.archdata.dma_data = vio_build_iommu_table(viodev);
 	viodev->dev.archdata.numa_node = of_node_to_nid(of_node);
 
@@ -245,6 +1260,9 @@ static int __init vio_bus_init(void)
 	int err;
 	struct device_node *node_vroot;
 
+	if (firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_sysfs_init();
+
 	err = bus_register(&vio_bus_type);
 	if (err) {
 		printk(KERN_ERR "failed to register VIO bus\n");
@@ -262,6 +1280,9 @@ static int __init vio_bus_init(void)
 		return err;
 	}
 
+	if (firmware_has_feature(FW_FEATURE_CMO))
+		vio_cmo_bus_init();
+
 	node_vroot = of_find_node_by_name(NULL, "vdevice");
 	if (node_vroot) {
 		struct device_node *of_node;
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 53d57d17a894..4a8ce62fe112 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -9,6 +9,25 @@
 
 ENTRY(_stext)
 
+PHDRS {
+	kernel PT_LOAD FLAGS(7); /* RWX */
+	notes PT_NOTE FLAGS(0);
+	dummy PT_NOTE FLAGS(0);
+
+	/* binutils < 2.18 has a bug that makes it misbehave when taking an
+	   ELF file with all segments at load address 0 as input.  This
+	   happens when running "strip" on vmlinux, because of the AT() magic
+	   in this linker script.  People using GCC >= 4.2 won't run into
+	   this problem, because the "build-id" support will put some data
+	   into the "notes" segment (at a non-zero load address).
+
+	   To work around this, we force some data into both the "dummy"
+	   segment and the kernel segment, so the dummy segment will get a
+	   non-zero load address.  It's not enough to always create the
+	   "notes" segment, since if nothing gets assigned to it, its load
+	   address will be zero.  */
+}
+
 #ifdef CONFIG_PPC64
 OUTPUT_ARCH(powerpc:common64)
 jiffies = jiffies_64;
@@ -35,7 +54,7 @@ SECTIONS
 		ALIGN_FUNCTION();
 		*(.text.head)
 		_text = .;
-		*(.text .fixup .text.init.refok .exit.text.refok)
+		*(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*)
 		SCHED_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
@@ -50,7 +69,7 @@ SECTIONS
 		. = ALIGN(PAGE_SIZE);
 		_etext = .;
 		PROVIDE32 (etext = .);
-	}
+	} :kernel
 
 	/* Read-only data */
 	RODATA
@@ -62,7 +81,13 @@ SECTIONS
 		__stop___ex_table = .;
 	}
 
-	NOTES
+	NOTES :kernel :notes
+
+	/* The dummy segment contents for the bug workaround mentioned above
+	   near PHDRS.  */
+	.dummy : AT(ADDR(.dummy) - LOAD_OFFSET) {
+		LONG(0xf177)
+	} :kernel :dummy
 
 /*
  * Init sections discarded at runtime
@@ -74,7 +99,7 @@ SECTIONS
 		_sinittext = .;
 		INIT_TEXT
 		_einittext = .;
-	}
+	} :kernel
 
 	/* .exit.text is discarded at runtime, not link time,
 	 * to deal with references from __bug_table
@@ -125,6 +150,12 @@ SECTIONS
 		*(__ftr_fixup)
 		__stop___ftr_fixup = .;
 	}
+	. = ALIGN(8);
+	__lwsync_fixup : AT(ADDR(__lwsync_fixup) - LOAD_OFFSET) {
+		__start___lwsync_fixup = .;
+		*(__lwsync_fixup)
+		__stop___lwsync_fixup = .;
+	}
 #ifdef CONFIG_PPC64
 	. = ALIGN(8);
 	__fw_ftr_fixup : AT(ADDR(__fw_ftr_fixup) - LOAD_OFFSET) {
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index 75dff7cfa814..5a5602da5091 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -177,7 +177,8 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid,
 	                                            vcpu->arch.msr & MSR_PR);
 }
 
-void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid)
+void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr,
+                           gva_t eend, u32 asid)
 {
 	unsigned int pid = asid & 0xff;
 	int i;
@@ -191,7 +192,7 @@ void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid)
 		if (!get_tlb_v(stlbe))
 			continue;
 
-		if (eaddr < get_tlb_eaddr(stlbe))
+		if (eend < get_tlb_eaddr(stlbe))
 			continue;
 
 		if (eaddr > get_tlb_end(stlbe))
diff --git a/arch/powerpc/kvm/Makefile b/arch/powerpc/kvm/Makefile
index d0d358d367ec..04e3449e1f42 100644
--- a/arch/powerpc/kvm/Makefile
+++ b/arch/powerpc/kvm/Makefile
@@ -4,7 +4,7 @@
 
 EXTRA_CFLAGS += -Ivirt/kvm -Iarch/powerpc/kvm
 
-common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o)
+common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o)
 
 kvm-objs := $(common-objs) powerpc.o emulate.o booke_guest.o
 obj-$(CONFIG_KVM) += kvm.o
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index 000097461283..8c605d0a5488 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -137,7 +137,7 @@ static int kvmppc_emul_tlbwe(struct kvm_vcpu *vcpu, u32 inst)
 	if (tlbe->word0 & PPC44x_TLB_VALID) {
 		eaddr = get_tlb_eaddr(tlbe);
 		asid = (tlbe->word0 & PPC44x_TLB_TS) | tlbe->tid;
-		kvmppc_mmu_invalidate(vcpu, eaddr, asid);
+		kvmppc_mmu_invalidate(vcpu, eaddr, get_tlb_end(tlbe), asid);
 	}
 
 	switch (ws) {
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 777e0f34e0ea..53826a5f6c06 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -145,6 +145,9 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_USER_MEMORY:
 		r = 1;
 		break;
+	case KVM_CAP_COALESCED_MMIO:
+		r = KVM_COALESCED_MMIO_PAGE_OFFSET;
+		break;
 	default:
 		r = 0;
 		break;
@@ -167,6 +170,10 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	return 0;
 }
 
+void kvm_arch_flush_shadow(struct kvm *kvm)
+{
+}
+
 struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id)
 {
 	struct kvm_vcpu *vcpu;
@@ -240,10 +247,6 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
 }
 
-void decache_vcpus_on_cpu(int cpu)
-{
-}
-
 int kvm_arch_vcpu_ioctl_debug_guest(struct kvm_vcpu *vcpu,
                                     struct kvm_debug_guest *dbg)
 {
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index e522b06cc42f..d69912c07ce7 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -6,12 +6,10 @@ ifeq ($(CONFIG_PPC64),y)
 EXTRA_CFLAGS		+= -mno-minimal-toc
 endif
 
-ifeq ($(CONFIG_PPC_MERGE),y)
 obj-y			:= string.o alloc.o \
 			   checksum_$(CONFIG_WORD_SIZE).o
 obj-$(CONFIG_PPC32)	+= div64.o copy_32.o crtsavres.o
 obj-$(CONFIG_HAS_IOMEM)	+= devres.o
-endif
 
 obj-$(CONFIG_PPC64)	+= copypage_64.o copyuser_64.o \
 			   memcpy_64.o usercopy_64.o mem_64.o string.o
@@ -24,3 +22,7 @@ obj-$(CONFIG_SMP)	+= locks.o
 endif
 
 obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o
+
+obj-y			+= code-patching.o
+obj-y			+= feature-fixups.o
+obj-$(CONFIG_FTR_FIXUP_SELFTEST) += feature-fixups-test.o
diff --git a/arch/powerpc/lib/code-patching.c b/arch/powerpc/lib/code-patching.c
new file mode 100644
index 000000000000..7c975d43e3f3
--- /dev/null
+++ b/arch/powerpc/lib/code-patching.c
@@ -0,0 +1,449 @@
+/*
+ *  Copyright 2008 Michael Ellerman, IBM Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/vmalloc.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <asm/page.h>
+#include <asm/code-patching.h>
+
+
+void patch_instruction(unsigned int *addr, unsigned int instr)
+{
+	*addr = instr;
+	asm ("dcbst 0, %0; sync; icbi 0,%0; sync; isync" : : "r" (addr));
+}
+
+void patch_branch(unsigned int *addr, unsigned long target, int flags)
+{
+	patch_instruction(addr, create_branch(addr, target, flags));
+}
+
+unsigned int create_branch(const unsigned int *addr,
+			   unsigned long target, int flags)
+{
+	unsigned int instruction;
+	long offset;
+
+	offset = target;
+	if (! (flags & BRANCH_ABSOLUTE))
+		offset = offset - (unsigned long)addr;
+
+	/* Check we can represent the target in the instruction format */
+	if (offset < -0x2000000 || offset > 0x1fffffc || offset & 0x3)
+		return 0;
+
+	/* Mask out the flags and target, so they don't step on each other. */
+	instruction = 0x48000000 | (flags & 0x3) | (offset & 0x03FFFFFC);
+
+	return instruction;
+}
+
+unsigned int create_cond_branch(const unsigned int *addr,
+				unsigned long target, int flags)
+{
+	unsigned int instruction;
+	long offset;
+
+	offset = target;
+	if (! (flags & BRANCH_ABSOLUTE))
+		offset = offset - (unsigned long)addr;
+
+	/* Check we can represent the target in the instruction format */
+	if (offset < -0x8000 || offset > 0x7FFF || offset & 0x3)
+		return 0;
+
+	/* Mask out the flags and target, so they don't step on each other. */
+	instruction = 0x40000000 | (flags & 0x3FF0003) | (offset & 0xFFFC);
+
+	return instruction;
+}
+
+static unsigned int branch_opcode(unsigned int instr)
+{
+	return (instr >> 26) & 0x3F;
+}
+
+static int instr_is_branch_iform(unsigned int instr)
+{
+	return branch_opcode(instr) == 18;
+}
+
+static int instr_is_branch_bform(unsigned int instr)
+{
+	return branch_opcode(instr) == 16;
+}
+
+int instr_is_relative_branch(unsigned int instr)
+{
+	if (instr & BRANCH_ABSOLUTE)
+		return 0;
+
+	return instr_is_branch_iform(instr) || instr_is_branch_bform(instr);
+}
+
+static unsigned long branch_iform_target(const unsigned int *instr)
+{
+	signed long imm;
+
+	imm = *instr & 0x3FFFFFC;
+
+	/* If the top bit of the immediate value is set this is negative */
+	if (imm & 0x2000000)
+		imm -= 0x4000000;
+
+	if ((*instr & BRANCH_ABSOLUTE) == 0)
+		imm += (unsigned long)instr;
+
+	return (unsigned long)imm;
+}
+
+static unsigned long branch_bform_target(const unsigned int *instr)
+{
+	signed long imm;
+
+	imm = *instr & 0xFFFC;
+
+	/* If the top bit of the immediate value is set this is negative */
+	if (imm & 0x8000)
+		imm -= 0x10000;
+
+	if ((*instr & BRANCH_ABSOLUTE) == 0)
+		imm += (unsigned long)instr;
+
+	return (unsigned long)imm;
+}
+
+unsigned long branch_target(const unsigned int *instr)
+{
+	if (instr_is_branch_iform(*instr))
+		return branch_iform_target(instr);
+	else if (instr_is_branch_bform(*instr))
+		return branch_bform_target(instr);
+
+	return 0;
+}
+
+int instr_is_branch_to_addr(const unsigned int *instr, unsigned long addr)
+{
+	if (instr_is_branch_iform(*instr) || instr_is_branch_bform(*instr))
+		return branch_target(instr) == addr;
+
+	return 0;
+}
+
+unsigned int translate_branch(const unsigned int *dest, const unsigned int *src)
+{
+	unsigned long target;
+
+	target = branch_target(src);
+
+	if (instr_is_branch_iform(*src))
+		return create_branch(dest, target, *src);
+	else if (instr_is_branch_bform(*src))
+		return create_cond_branch(dest, target, *src);
+
+	return 0;
+}
+
+
+#ifdef CONFIG_CODE_PATCHING_SELFTEST
+
+static void __init test_trampoline(void)
+{
+	asm ("nop;\n");
+}
+
+#define check(x)	\
+	if (!(x)) printk("code-patching: test failed at line %d\n", __LINE__);
+
+static void __init test_branch_iform(void)
+{
+	unsigned int instr;
+	unsigned long addr;
+
+	addr = (unsigned long)&instr;
+
+	/* The simplest case, branch to self, no flags */
+	check(instr_is_branch_iform(0x48000000));
+	/* All bits of target set, and flags */
+	check(instr_is_branch_iform(0x4bffffff));
+	/* High bit of opcode set, which is wrong */
+	check(!instr_is_branch_iform(0xcbffffff));
+	/* Middle bits of opcode set, which is wrong */
+	check(!instr_is_branch_iform(0x7bffffff));
+
+	/* Simplest case, branch to self with link */
+	check(instr_is_branch_iform(0x48000001));
+	/* All bits of targets set */
+	check(instr_is_branch_iform(0x4bfffffd));
+	/* Some bits of targets set */
+	check(instr_is_branch_iform(0x4bff00fd));
+	/* Must be a valid branch to start with */
+	check(!instr_is_branch_iform(0x7bfffffd));
+
+	/* Absolute branch to 0x100 */
+	instr = 0x48000103;
+	check(instr_is_branch_to_addr(&instr, 0x100));
+	/* Absolute branch to 0x420fc */
+	instr = 0x480420ff;
+	check(instr_is_branch_to_addr(&instr, 0x420fc));
+	/* Maximum positive relative branch, + 20MB - 4B */
+	instr = 0x49fffffc;
+	check(instr_is_branch_to_addr(&instr, addr + 0x1FFFFFC));
+	/* Smallest negative relative branch, - 4B */
+	instr = 0x4bfffffc;
+	check(instr_is_branch_to_addr(&instr, addr - 4));
+	/* Largest negative relative branch, - 32 MB */
+	instr = 0x4a000000;
+	check(instr_is_branch_to_addr(&instr, addr - 0x2000000));
+
+	/* Branch to self, with link */
+	instr = create_branch(&instr, addr, BRANCH_SET_LINK);
+	check(instr_is_branch_to_addr(&instr, addr));
+
+	/* Branch to self - 0x100, with link */
+	instr = create_branch(&instr, addr - 0x100, BRANCH_SET_LINK);
+	check(instr_is_branch_to_addr(&instr, addr - 0x100));
+
+	/* Branch to self + 0x100, no link */
+	instr = create_branch(&instr, addr + 0x100, 0);
+	check(instr_is_branch_to_addr(&instr, addr + 0x100));
+
+	/* Maximum relative negative offset, - 32 MB */
+	instr = create_branch(&instr, addr - 0x2000000, BRANCH_SET_LINK);
+	check(instr_is_branch_to_addr(&instr, addr - 0x2000000));
+
+	/* Out of range relative negative offset, - 32 MB + 4*/
+	instr = create_branch(&instr, addr - 0x2000004, BRANCH_SET_LINK);
+	check(instr == 0);
+
+	/* Out of range relative positive offset, + 32 MB */
+	instr = create_branch(&instr, addr + 0x2000000, BRANCH_SET_LINK);
+	check(instr == 0);
+
+	/* Unaligned target */
+	instr = create_branch(&instr, addr + 3, BRANCH_SET_LINK);
+	check(instr == 0);
+
+	/* Check flags are masked correctly */
+	instr = create_branch(&instr, addr, 0xFFFFFFFC);
+	check(instr_is_branch_to_addr(&instr, addr));
+	check(instr == 0x48000000);
+}
+
+static void __init test_create_function_call(void)
+{
+	unsigned int *iptr;
+	unsigned long dest;
+
+	/* Check we can create a function call */
+	iptr = (unsigned int *)ppc_function_entry(test_trampoline);
+	dest = ppc_function_entry(test_create_function_call);
+	patch_instruction(iptr, create_branch(iptr, dest, BRANCH_SET_LINK));
+	check(instr_is_branch_to_addr(iptr, dest));
+}
+
+static void __init test_branch_bform(void)
+{
+	unsigned long addr;
+	unsigned int *iptr, instr, flags;
+
+	iptr = &instr;
+	addr = (unsigned long)iptr;
+
+	/* The simplest case, branch to self, no flags */
+	check(instr_is_branch_bform(0x40000000));
+	/* All bits of target set, and flags */
+	check(instr_is_branch_bform(0x43ffffff));
+	/* High bit of opcode set, which is wrong */
+	check(!instr_is_branch_bform(0xc3ffffff));
+	/* Middle bits of opcode set, which is wrong */
+	check(!instr_is_branch_bform(0x7bffffff));
+
+	/* Absolute conditional branch to 0x100 */
+	instr = 0x43ff0103;
+	check(instr_is_branch_to_addr(&instr, 0x100));
+	/* Absolute conditional branch to 0x20fc */
+	instr = 0x43ff20ff;
+	check(instr_is_branch_to_addr(&instr, 0x20fc));
+	/* Maximum positive relative conditional branch, + 32 KB - 4B */
+	instr = 0x43ff7ffc;
+	check(instr_is_branch_to_addr(&instr, addr + 0x7FFC));
+	/* Smallest negative relative conditional branch, - 4B */
+	instr = 0x43fffffc;
+	check(instr_is_branch_to_addr(&instr, addr - 4));
+	/* Largest negative relative conditional branch, - 32 KB */
+	instr = 0x43ff8000;
+	check(instr_is_branch_to_addr(&instr, addr - 0x8000));
+
+	/* All condition code bits set & link */
+	flags = 0x3ff000 | BRANCH_SET_LINK;
+
+	/* Branch to self */
+	instr = create_cond_branch(iptr, addr, flags);
+	check(instr_is_branch_to_addr(&instr, addr));
+
+	/* Branch to self - 0x100 */
+	instr = create_cond_branch(iptr, addr - 0x100, flags);
+	check(instr_is_branch_to_addr(&instr, addr - 0x100));
+
+	/* Branch to self + 0x100 */
+	instr = create_cond_branch(iptr, addr + 0x100, flags);
+	check(instr_is_branch_to_addr(&instr, addr + 0x100));
+
+	/* Maximum relative negative offset, - 32 KB */
+	instr = create_cond_branch(iptr, addr - 0x8000, flags);
+	check(instr_is_branch_to_addr(&instr, addr - 0x8000));
+
+	/* Out of range relative negative offset, - 32 KB + 4*/
+	instr = create_cond_branch(iptr, addr - 0x8004, flags);
+	check(instr == 0);
+
+	/* Out of range relative positive offset, + 32 KB */
+	instr = create_cond_branch(iptr, addr + 0x8000, flags);
+	check(instr == 0);
+
+	/* Unaligned target */
+	instr = create_cond_branch(iptr, addr + 3, flags);
+	check(instr == 0);
+
+	/* Check flags are masked correctly */
+	instr = create_cond_branch(iptr, addr, 0xFFFFFFFC);
+	check(instr_is_branch_to_addr(&instr, addr));
+	check(instr == 0x43FF0000);
+}
+
+static void __init test_translate_branch(void)
+{
+	unsigned long addr;
+	unsigned int *p, *q;
+	void *buf;
+
+	buf = vmalloc(PAGE_ALIGN(0x2000000 + 1));
+	check(buf);
+	if (!buf)
+		return;
+
+	/* Simple case, branch to self moved a little */
+	p = buf;
+	addr = (unsigned long)p;
+	patch_branch(p, addr, 0);
+	check(instr_is_branch_to_addr(p, addr));
+	q = p + 1;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(q, addr));
+
+	/* Maximum negative case, move b . to addr + 32 MB */
+	p = buf;
+	addr = (unsigned long)p;
+	patch_branch(p, addr, 0);
+	q = buf + 0x2000000;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+	check(*q == 0x4a000000);
+
+	/* Maximum positive case, move x to x - 32 MB + 4 */
+	p = buf + 0x2000000;
+	addr = (unsigned long)p;
+	patch_branch(p, addr, 0);
+	q = buf + 4;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+	check(*q == 0x49fffffc);
+
+	/* Jump to x + 16 MB moved to x + 20 MB */
+	p = buf;
+	addr = 0x1000000 + (unsigned long)buf;
+	patch_branch(p, addr, BRANCH_SET_LINK);
+	q = buf + 0x1400000;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+
+	/* Jump to x + 16 MB moved to x - 16 MB + 4 */
+	p = buf + 0x1000000;
+	addr = 0x2000000 + (unsigned long)buf;
+	patch_branch(p, addr, 0);
+	q = buf + 4;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+
+
+	/* Conditional branch tests */
+
+	/* Simple case, branch to self moved a little */
+	p = buf;
+	addr = (unsigned long)p;
+	patch_instruction(p, create_cond_branch(p, addr, 0));
+	check(instr_is_branch_to_addr(p, addr));
+	q = p + 1;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(q, addr));
+
+	/* Maximum negative case, move b . to addr + 32 KB */
+	p = buf;
+	addr = (unsigned long)p;
+	patch_instruction(p, create_cond_branch(p, addr, 0xFFFFFFFC));
+	q = buf + 0x8000;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+	check(*q == 0x43ff8000);
+
+	/* Maximum positive case, move x to x - 32 KB + 4 */
+	p = buf + 0x8000;
+	addr = (unsigned long)p;
+	patch_instruction(p, create_cond_branch(p, addr, 0xFFFFFFFC));
+	q = buf + 4;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+	check(*q == 0x43ff7ffc);
+
+	/* Jump to x + 12 KB moved to x + 20 KB */
+	p = buf;
+	addr = 0x3000 + (unsigned long)buf;
+	patch_instruction(p, create_cond_branch(p, addr, BRANCH_SET_LINK));
+	q = buf + 0x5000;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+
+	/* Jump to x + 8 KB moved to x - 8 KB + 4 */
+	p = buf + 0x2000;
+	addr = 0x4000 + (unsigned long)buf;
+	patch_instruction(p, create_cond_branch(p, addr, 0));
+	q = buf + 4;
+	patch_instruction(q, translate_branch(q, p));
+	check(instr_is_branch_to_addr(p, addr));
+	check(instr_is_branch_to_addr(q, addr));
+
+	/* Free the buffer we were using */
+	vfree(buf);
+}
+
+static int __init test_code_patching(void)
+{
+	printk(KERN_DEBUG "Running code patching self-tests ...\n");
+
+	test_branch_iform();
+	test_branch_bform();
+	test_create_function_call();
+	test_translate_branch();
+
+	return 0;
+}
+late_initcall(test_code_patching);
+
+#endif /* CONFIG_CODE_PATCHING_SELFTEST */
diff --git a/arch/powerpc/lib/dma-noncoherent.c b/arch/powerpc/lib/dma-noncoherent.c
index 6656d47841d0..5d83907f6591 100644
--- a/arch/powerpc/lib/dma-noncoherent.c
+++ b/arch/powerpc/lib/dma-noncoherent.c
@@ -348,8 +348,15 @@ void __dma_sync(void *vaddr, size_t size, int direction)
 	switch (direction) {
 	case DMA_NONE:
 		BUG();
-	case DMA_FROM_DEVICE:	/* invalidate only */
-		invalidate_dcache_range(start, end);
+	case DMA_FROM_DEVICE:
+		/*
+		 * invalidate only when cache-line aligned otherwise there is
+		 * the potential for discarding uncommitted data from the cache
+		 */
+		if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
+			flush_dcache_range(start, end);
+		else
+			invalidate_dcache_range(start, end);
 		break;
 	case DMA_TO_DEVICE:		/* writeback only */
 		clean_dcache_range(start, end);
diff --git a/arch/powerpc/lib/feature-fixups-test.S b/arch/powerpc/lib/feature-fixups-test.S
new file mode 100644
index 000000000000..cb737484c5aa
--- /dev/null
+++ b/arch/powerpc/lib/feature-fixups-test.S
@@ -0,0 +1,742 @@
+/*
+ * Copyright 2008 Michael Ellerman, IBM Corporation.
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/feature-fixups.h>
+#include <asm/ppc_asm.h>
+#include <asm/synch.h>
+
+	.text
+
+#define globl(x)		\
+	.globl x;	\
+x:
+
+globl(ftr_fixup_test1)
+	or	1,1,1
+	or	2,2,2	/* fixup will nop out this instruction */
+	or	3,3,3
+
+globl(end_ftr_fixup_test1)
+
+globl(ftr_fixup_test1_orig)
+	or	1,1,1
+	or	2,2,2
+	or	3,3,3
+
+globl(ftr_fixup_test1_expected)
+	or	1,1,1
+	nop
+	or	3,3,3
+
+globl(ftr_fixup_test2)
+	or	1,1,1
+	or	2,2,2	/* fixup will replace this with ftr_fixup_test2_alt */
+	or	3,3,3
+
+globl(end_ftr_fixup_test2)
+
+globl(ftr_fixup_test2_orig)
+	or	1,1,1
+	or	2,2,2
+	or	3,3,3
+
+globl(ftr_fixup_test2_alt)
+	or	31,31,31
+
+globl(ftr_fixup_test2_expected)
+	or	1,1,1
+	or	31,31,31
+	or	3,3,3
+
+globl(ftr_fixup_test3)
+	or	1,1,1
+	or	2,2,2	/* fixup will fail to replace this */
+	or	3,3,3
+
+globl(end_ftr_fixup_test3)
+
+globl(ftr_fixup_test3_orig)
+	or	1,1,1
+	or	2,2,2
+	or	3,3,3
+
+globl(ftr_fixup_test3_alt)
+	or	31,31,31
+	or	31,31,31
+
+globl(ftr_fixup_test4)
+	or	1,1,1
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	3,3,3
+
+globl(end_ftr_fixup_test4)
+
+globl(ftr_fixup_test4_expected)
+	or	1,1,1
+	or	31,31,31
+	or	31,31,31
+	nop
+	nop
+	or	3,3,3
+
+globl(ftr_fixup_test4_orig)
+	or	1,1,1
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	3,3,3
+
+globl(ftr_fixup_test4_alt)
+	or	31,31,31
+	or	31,31,31
+
+
+globl(ftr_fixup_test5)
+	or	1,1,1
+BEGIN_FTR_SECTION
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+	or	2,2,2
+FTR_SECTION_ELSE
+2:	b	3f
+3:	or	5,5,5
+	beq	3b
+	b	1f
+	or	6,6,6
+	b	2b
+1:	bdnz	3b
+ALT_FTR_SECTION_END(0, 1)
+	or	1,1,1
+
+globl(end_ftr_fixup_test5)
+
+globl(ftr_fixup_test5_expected)
+	or	1,1,1
+2:	b	3f
+3:	or	5,5,5
+	beq	3b
+	b	1f
+	or	6,6,6
+	b	2b
+1:	bdnz	3b
+	or	1,1,1
+
+globl(ftr_fixup_test6)
+1:	or	1,1,1
+BEGIN_FTR_SECTION
+	or	5,5,5
+2:	PPC_LCMPI	r3,0
+	beq	4f
+	blt	2b
+	b	1b
+	b	4f
+FTR_SECTION_ELSE
+2:	or	2,2,2
+	PPC_LCMPI	r3,1
+	beq	3f
+	blt	2b
+	b	3f
+	b	1b
+ALT_FTR_SECTION_END(0, 1)
+3:	or	1,1,1
+	or	2,2,2
+4:	or	3,3,3
+
+globl(end_ftr_fixup_test6)
+
+globl(ftr_fixup_test6_expected)
+1:	or	1,1,1
+2:	or	2,2,2
+	PPC_LCMPI	r3,1
+	beq	3f
+	blt	2b
+	b	3f
+	b	1b
+2:	or	1,1,1
+	or	2,2,2
+3:	or	3,3,3
+
+
+#define	MAKE_MACRO_TEST(TYPE)						\
+globl(ftr_fixup_test_ ##TYPE##_macros)					\
+	or	1,1,1;							\
+	/* Basic test, this section should all be nop'ed */		\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic test, this section should NOT be nop'ed */		\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, inner section should be nop'ed */		\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(80)					\
+	or	3,3,3;							\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 1, 80)					\
+	or	2,2,2;							\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, whole section should be nop'ed */		\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(80)					\
+	or	3,3,3;							\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 0, 80)					\
+	or	2,2,2;							\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, none should be nop'ed */			\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(80)					\
+	or	3,3,3;							\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 0, 80)					\
+	or	2,2,2;							\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic alt section test, default case should be taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	5,5,5;							\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic alt section test, else case should be taken */		\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+	or	31,31,31;						\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt with smaller else case, should be padded with nops */	\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in default case */		\
+	/* Default case should be taken, with nop'ed inner section */	\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	3,3,3;							\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 1, 95)					\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+ALT_##TYPE##_SECTION_END(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in else, default taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	5,5,5;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 1, 95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in else, else taken & nop */	\
+BEGIN_##TYPE##_SECTION							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+##TYPE##_SECTION_ELSE							\
+	or	5,5,5;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	3,3,3;							\
+END_##TYPE##_SECTION_NESTED(0, 1, 95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, default taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95)				\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, else taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95)				\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, all nop'ed */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95)				\
+	or	2,2,2;							\
+END_##TYPE##_SECTION(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, default with inner default taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95)				\
+	or	2,2,2;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+BEGIN_##TYPE##_SECTION_NESTED(94)					\
+	or	5,5,5;							\
+##TYPE##_SECTION_ELSE_NESTED(94)					\
+	or	1,1,1;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94)				\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, default with inner else taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95)				\
+	or	2,2,2;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+BEGIN_##TYPE##_SECTION_NESTED(94)					\
+	or	5,5,5;							\
+##TYPE##_SECTION_ELSE_NESTED(94)					\
+	or	1,1,1;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94)				\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 0)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else with inner default taken */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95)				\
+	or	2,2,2;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+BEGIN_##TYPE##_SECTION_NESTED(94)					\
+	or	5,5,5;							\
+##TYPE##_SECTION_ELSE_NESTED(94)					\
+	or	1,1,1;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94)				\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else with inner else taken */		\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+BEGIN_##TYPE##_SECTION_NESTED(95)					\
+	or	1,1,1;							\
+##TYPE##_SECTION_ELSE_NESTED(95)					\
+	or	5,5,5;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95)				\
+	or	2,2,2;							\
+##TYPE##_SECTION_ELSE							\
+	or	31,31,31;						\
+BEGIN_##TYPE##_SECTION_NESTED(94)					\
+	or	5,5,5;							\
+##TYPE##_SECTION_ELSE_NESTED(94)					\
+	or	1,1,1;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 94)				\
+	or	31,31,31;						\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else can have large else case */	\
+BEGIN_##TYPE##_SECTION							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+##TYPE##_SECTION_ELSE 							\
+BEGIN_##TYPE##_SECTION_NESTED(94) 					\
+	or	5,5,5;							\
+	or	5,5,5;							\
+	or	5,5,5;							\
+	or	5,5,5;							\
+##TYPE##_SECTION_ELSE_NESTED(94) 					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	or	1,1,1;							\
+ALT_##TYPE##_SECTION_END_NESTED(0, 1, 94)				\
+ALT_##TYPE##_SECTION_END(0, 1)						\
+	or	1,1,1;							\
+	or	1,1,1;
+
+#define	MAKE_MACRO_TEST_EXPECTED(TYPE)					\
+globl(ftr_fixup_test_ ##TYPE##_macros_expected)				\
+	or	1,1,1;							\
+	/* Basic test, this section should all be nop'ed */		\
+/* BEGIN_##TYPE##_SECTION */						\
+	nop;								\
+	nop;								\
+	nop;								\
+/* END_##TYPE##_SECTION(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic test, this section should NOT be nop'ed */		\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+	or	2,2,2;							\
+	or	2,2,2;							\
+/* END_##TYPE##_SECTION(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, inner section should be nop'ed */		\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(80) */					\
+	nop;								\
+	nop;								\
+/* END_##TYPE##_SECTION_NESTED(0, 1, 80) */				\
+	or	2,2,2;							\
+	or	2,2,2;							\
+/* END_##TYPE##_SECTION(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, whole section should be nop'ed */		\
+	/* NB. inner section is not nop'ed, but then entire outer is */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	nop;								\
+	nop;								\
+/* BEGIN_##TYPE##_SECTION_NESTED(80) */					\
+	nop;								\
+	nop;								\
+/* END_##TYPE##_SECTION_NESTED(0, 0, 80) */				\
+	nop;								\
+	nop;								\
+/* END_##TYPE##_SECTION(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nesting test, none should be nop'ed */			\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(80) */					\
+	or	3,3,3;							\
+	or	3,3,3;							\
+/* END_##TYPE##_SECTION_NESTED(0, 0, 80) */				\
+	or	2,2,2;							\
+	or	2,2,2;							\
+/* END_##TYPE##_SECTION(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic alt section test, default case should be taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+/* ##TYPE##_SECTION_ELSE */						\
+	/* or	5,5,5; */						\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Basic alt section test, else case should be taken */		\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+	or	31,31,31;						\
+	or	31,31,31;						\
+	or	31,31,31;						\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt with smaller else case, should be padded with nops */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+	or	31,31,31;						\
+	nop;								\
+	nop;								\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in default case */		\
+	/* Default case should be taken, with nop'ed inner section */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	3,3,3;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	nop;								\
+	nop;								\
+/* END_##TYPE##_SECTION_NESTED(0, 1, 95) */				\
+	or	3,3,3;							\
+/* ##TYPE##_SECTION_ELSE */						\
+	/* or	2,2,2; */						\
+	/* or	2,2,2; */						\
+/* ALT_##TYPE##_SECTION_END(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in else, default taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	3,3,3;							\
+	or	3,3,3;							\
+	or	3,3,3;							\
+/* ##TYPE##_SECTION_ELSE */						\
+	/* or	5,5,5; */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	/* or	3,3,3; */						\
+/* END_##TYPE##_SECTION_NESTED(0, 1, 95) */				\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Alt section with nested section in else, else taken & nop */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+	/* or	3,3,3; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+	or	5,5,5;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	nop;								\
+/* END_##TYPE##_SECTION_NESTED(0, 1, 95) */				\
+	or	5,5,5;							\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, default taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	or	1,1,1;							\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95) */				\
+	or	2,2,2;							\
+/* END_##TYPE##_SECTION(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, else taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	/* or	1,1,1; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	or	5,5,5;							\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) */				\
+	or	2,2,2;							\
+/* END_##TYPE##_SECTION(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Feature section with nested alt section, all nop'ed */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	nop;								\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	nop;								\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95) */				\
+	nop;								\
+/* END_##TYPE##_SECTION(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, default with inner default taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	or	1,1,1;							\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 95) */				\
+	or	2,2,2;							\
+/* ##TYPE##_SECTION_ELSE */						\
+	/* or	31,31,31; */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(94) */					\
+	/* or	5,5,5; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(94) */					\
+	/* or	1,1,1; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94) */				\
+	/* or	31,31,31; */						\
+/* ALT_##TYPE##_SECTION_END(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, default with inner else taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	or	2,2,2;							\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	/* or	1,1,1; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	or	5,5,5;							\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) */				\
+	or	2,2,2;							\
+/* ##TYPE##_SECTION_ELSE */						\
+	/* or	31,31,31; */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(94) */					\
+	/* or	5,5,5; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(94) */					\
+	/* or	1,1,1; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94) */				\
+	/* or	31,31,31; */						\
+/* ALT_##TYPE##_SECTION_END(0, 0) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else with inner default taken */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	2,2,2; */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	/* or	1,1,1; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) */				\
+	/* or	2,2,2; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+	or	31,31,31;						\
+/* BEGIN_##TYPE##_SECTION_NESTED(94) */					\
+	or	5,5,5;							\
+/* ##TYPE##_SECTION_ELSE_NESTED(94) */					\
+	/* or	1,1,1; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 0, 94) */				\
+	or	31,31,31;						\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else with inner else taken */		\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	2,2,2; */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(95) */					\
+	/* or	1,1,1; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(95) */					\
+	/* or	5,5,5; */						\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 95) */				\
+	/* or	2,2,2; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+	or	31,31,31;						\
+/* BEGIN_##TYPE##_SECTION_NESTED(94) */					\
+	/* or	5,5,5; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(94) */					\
+	or	1,1,1;							\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 94) */				\
+	or	31,31,31;						\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	/* Nested alt sections, else can have large else case */	\
+/* BEGIN_##TYPE##_SECTION */						\
+	/* or	2,2,2; */						\
+	/* or	2,2,2; */						\
+	/* or	2,2,2; */						\
+	/* or	2,2,2; */						\
+/* ##TYPE##_SECTION_ELSE */						\
+/* BEGIN_##TYPE##_SECTION_NESTED(94) */					\
+	/* or	5,5,5; */						\
+	/* or	5,5,5; */						\
+	/* or	5,5,5; */						\
+	/* or	5,5,5; */						\
+/* ##TYPE##_SECTION_ELSE_NESTED(94) */					\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	or	1,1,1;							\
+	or	1,1,1;							\
+/* ALT_##TYPE##_SECTION_END_NESTED(0, 1, 94) */				\
+/* ALT_##TYPE##_SECTION_END(0, 1) */					\
+	or	1,1,1;							\
+	or	1,1,1;
+
+MAKE_MACRO_TEST(FTR);
+MAKE_MACRO_TEST_EXPECTED(FTR);
+
+#ifdef CONFIG_PPC64
+MAKE_MACRO_TEST(FW_FTR);
+MAKE_MACRO_TEST_EXPECTED(FW_FTR);
+#endif
+
+globl(lwsync_fixup_test)
+1:	or	1,1,1
+	LWSYNC
+globl(end_lwsync_fixup_test)
+
+globl(lwsync_fixup_test_expected_LWSYNC)
+1:	or	1,1,1
+	lwsync
+
+globl(lwsync_fixup_test_expected_SYNC)
+1:	or	1,1,1
+	sync
+
diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c
new file mode 100644
index 000000000000..8c5a03be31e0
--- /dev/null
+++ b/arch/powerpc/lib/feature-fixups.c
@@ -0,0 +1,351 @@
+/*
+ *  Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ *  Modifications for ppc64:
+ *      Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com>
+ *
+ *  Copyright 2008 Michael Ellerman, IBM Corporation.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <asm/cputable.h>
+#include <asm/code-patching.h>
+
+
+struct fixup_entry {
+	unsigned long	mask;
+	unsigned long	value;
+	long		start_off;
+	long		end_off;
+	long		alt_start_off;
+	long		alt_end_off;
+};
+
+static unsigned int *calc_addr(struct fixup_entry *fcur, long offset)
+{
+	/*
+	 * We store the offset to the code as a negative offset from
+	 * the start of the alt_entry, to support the VDSO. This
+	 * routine converts that back into an actual address.
+	 */
+	return (unsigned int *)((unsigned long)fcur + offset);
+}
+
+static int patch_alt_instruction(unsigned int *src, unsigned int *dest,
+				 unsigned int *alt_start, unsigned int *alt_end)
+{
+	unsigned int instr;
+
+	instr = *src;
+
+	if (instr_is_relative_branch(*src)) {
+		unsigned int *target = (unsigned int *)branch_target(src);
+
+		/* Branch within the section doesn't need translating */
+		if (target < alt_start || target >= alt_end) {
+			instr = translate_branch(dest, src);
+			if (!instr)
+				return 1;
+		}
+	}
+
+	patch_instruction(dest, instr);
+
+	return 0;
+}
+
+static int patch_feature_section(unsigned long value, struct fixup_entry *fcur)
+{
+	unsigned int *start, *end, *alt_start, *alt_end, *src, *dest;
+
+	start = calc_addr(fcur, fcur->start_off);
+	end = calc_addr(fcur, fcur->end_off);
+	alt_start = calc_addr(fcur, fcur->alt_start_off);
+	alt_end = calc_addr(fcur, fcur->alt_end_off);
+
+	if ((alt_end - alt_start) > (end - start))
+		return 1;
+
+	if ((value & fcur->mask) == fcur->value)
+		return 0;
+
+	src = alt_start;
+	dest = start;
+
+	for (; src < alt_end; src++, dest++) {
+		if (patch_alt_instruction(src, dest, alt_start, alt_end))
+			return 1;
+	}
+
+	for (; dest < end; dest++)
+		patch_instruction(dest, PPC_NOP_INSTR);
+
+	return 0;
+}
+
+void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end)
+{
+	struct fixup_entry *fcur, *fend;
+
+	fcur = fixup_start;
+	fend = fixup_end;
+
+	for (; fcur < fend; fcur++) {
+		if (patch_feature_section(value, fcur)) {
+			WARN_ON(1);
+			printk("Unable to patch feature section at %p - %p" \
+				" with %p - %p\n",
+				calc_addr(fcur, fcur->start_off),
+				calc_addr(fcur, fcur->end_off),
+				calc_addr(fcur, fcur->alt_start_off),
+				calc_addr(fcur, fcur->alt_end_off));
+		}
+	}
+}
+
+void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end)
+{
+	unsigned int *start, *end, *dest;
+
+	if (!(value & CPU_FTR_LWSYNC))
+		return ;
+
+	start = fixup_start;
+	end = fixup_end;
+
+	for (; start < end; start++) {
+		dest = (void *)start + *start;
+		patch_instruction(dest, PPC_LWSYNC_INSTR);
+	}
+}
+
+#ifdef CONFIG_FTR_FIXUP_SELFTEST
+
+#define check(x)	\
+	if (!(x)) printk("feature-fixups: test failed at line %d\n", __LINE__);
+
+/* This must be after the text it fixes up, vmlinux.lds.S enforces that atm */
+static struct fixup_entry fixup;
+
+static long calc_offset(struct fixup_entry *entry, unsigned int *p)
+{
+	return (unsigned long)p - (unsigned long)entry;
+}
+
+void test_basic_patching(void)
+{
+	extern unsigned int ftr_fixup_test1;
+	extern unsigned int end_ftr_fixup_test1;
+	extern unsigned int ftr_fixup_test1_orig;
+	extern unsigned int ftr_fixup_test1_expected;
+	int size = &end_ftr_fixup_test1 - &ftr_fixup_test1;
+
+	fixup.value = fixup.mask = 8;
+	fixup.start_off = calc_offset(&fixup, &ftr_fixup_test1 + 1);
+	fixup.end_off = calc_offset(&fixup, &ftr_fixup_test1 + 2);
+	fixup.alt_start_off = fixup.alt_end_off = 0;
+
+	/* Sanity check */
+	check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_orig, size) == 0);
+
+	/* Check we don't patch if the value matches */
+	patch_feature_section(8, &fixup);
+	check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_orig, size) == 0);
+
+	/* Check we do patch if the value doesn't match */
+	patch_feature_section(0, &fixup);
+	check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_expected, size) == 0);
+
+	/* Check we do patch if the mask doesn't match */
+	memcpy(&ftr_fixup_test1, &ftr_fixup_test1_orig, size);
+	check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_orig, size) == 0);
+	patch_feature_section(~8, &fixup);
+	check(memcmp(&ftr_fixup_test1, &ftr_fixup_test1_expected, size) == 0);
+}
+
+static void test_alternative_patching(void)
+{
+	extern unsigned int ftr_fixup_test2;
+	extern unsigned int end_ftr_fixup_test2;
+	extern unsigned int ftr_fixup_test2_orig;
+	extern unsigned int ftr_fixup_test2_alt;
+	extern unsigned int ftr_fixup_test2_expected;
+	int size = &end_ftr_fixup_test2 - &ftr_fixup_test2;
+
+	fixup.value = fixup.mask = 0xF;
+	fixup.start_off = calc_offset(&fixup, &ftr_fixup_test2 + 1);
+	fixup.end_off = calc_offset(&fixup, &ftr_fixup_test2 + 2);
+	fixup.alt_start_off = calc_offset(&fixup, &ftr_fixup_test2_alt);
+	fixup.alt_end_off = calc_offset(&fixup, &ftr_fixup_test2_alt + 1);
+
+	/* Sanity check */
+	check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_orig, size) == 0);
+
+	/* Check we don't patch if the value matches */
+	patch_feature_section(0xF, &fixup);
+	check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_orig, size) == 0);
+
+	/* Check we do patch if the value doesn't match */
+	patch_feature_section(0, &fixup);
+	check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_expected, size) == 0);
+
+	/* Check we do patch if the mask doesn't match */
+	memcpy(&ftr_fixup_test2, &ftr_fixup_test2_orig, size);
+	check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_orig, size) == 0);
+	patch_feature_section(~0xF, &fixup);
+	check(memcmp(&ftr_fixup_test2, &ftr_fixup_test2_expected, size) == 0);
+}
+
+static void test_alternative_case_too_big(void)
+{
+	extern unsigned int ftr_fixup_test3;
+	extern unsigned int end_ftr_fixup_test3;
+	extern unsigned int ftr_fixup_test3_orig;
+	extern unsigned int ftr_fixup_test3_alt;
+	int size = &end_ftr_fixup_test3 - &ftr_fixup_test3;
+
+	fixup.value = fixup.mask = 0xC;
+	fixup.start_off = calc_offset(&fixup, &ftr_fixup_test3 + 1);
+	fixup.end_off = calc_offset(&fixup, &ftr_fixup_test3 + 2);
+	fixup.alt_start_off = calc_offset(&fixup, &ftr_fixup_test3_alt);
+	fixup.alt_end_off = calc_offset(&fixup, &ftr_fixup_test3_alt + 2);
+
+	/* Sanity check */
+	check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0);
+
+	/* Expect nothing to be patched, and the error returned to us */
+	check(patch_feature_section(0xF, &fixup) == 1);
+	check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0);
+	check(patch_feature_section(0, &fixup) == 1);
+	check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0);
+	check(patch_feature_section(~0xF, &fixup) == 1);
+	check(memcmp(&ftr_fixup_test3, &ftr_fixup_test3_orig, size) == 0);
+}
+
+static void test_alternative_case_too_small(void)
+{
+	extern unsigned int ftr_fixup_test4;
+	extern unsigned int end_ftr_fixup_test4;
+	extern unsigned int ftr_fixup_test4_orig;
+	extern unsigned int ftr_fixup_test4_alt;
+	extern unsigned int ftr_fixup_test4_expected;
+	int size = &end_ftr_fixup_test4 - &ftr_fixup_test4;
+	unsigned long flag;
+
+	/* Check a high-bit flag */
+	flag = 1UL << ((sizeof(unsigned long) - 1) * 8);
+	fixup.value = fixup.mask = flag;
+	fixup.start_off = calc_offset(&fixup, &ftr_fixup_test4 + 1);
+	fixup.end_off = calc_offset(&fixup, &ftr_fixup_test4 + 5);
+	fixup.alt_start_off = calc_offset(&fixup, &ftr_fixup_test4_alt);
+	fixup.alt_end_off = calc_offset(&fixup, &ftr_fixup_test4_alt + 2);
+
+	/* Sanity check */
+	check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_orig, size) == 0);
+
+	/* Check we don't patch if the value matches */
+	patch_feature_section(flag, &fixup);
+	check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_orig, size) == 0);
+
+	/* Check we do patch if the value doesn't match */
+	patch_feature_section(0, &fixup);
+	check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_expected, size) == 0);
+
+	/* Check we do patch if the mask doesn't match */
+	memcpy(&ftr_fixup_test4, &ftr_fixup_test4_orig, size);
+	check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_orig, size) == 0);
+	patch_feature_section(~flag, &fixup);
+	check(memcmp(&ftr_fixup_test4, &ftr_fixup_test4_expected, size) == 0);
+}
+
+static void test_alternative_case_with_branch(void)
+{
+	extern unsigned int ftr_fixup_test5;
+	extern unsigned int end_ftr_fixup_test5;
+	extern unsigned int ftr_fixup_test5_expected;
+	int size = &end_ftr_fixup_test5 - &ftr_fixup_test5;
+
+	check(memcmp(&ftr_fixup_test5, &ftr_fixup_test5_expected, size) == 0);
+}
+
+static void test_alternative_case_with_external_branch(void)
+{
+	extern unsigned int ftr_fixup_test6;
+	extern unsigned int end_ftr_fixup_test6;
+	extern unsigned int ftr_fixup_test6_expected;
+	int size = &end_ftr_fixup_test6 - &ftr_fixup_test6;
+
+	check(memcmp(&ftr_fixup_test6, &ftr_fixup_test6_expected, size) == 0);
+}
+
+static void test_cpu_macros(void)
+{
+	extern void ftr_fixup_test_FTR_macros;
+	extern void ftr_fixup_test_FTR_macros_expected;
+	unsigned long size = &ftr_fixup_test_FTR_macros_expected -
+			     &ftr_fixup_test_FTR_macros;
+
+	/* The fixups have already been done for us during boot */
+	check(memcmp(&ftr_fixup_test_FTR_macros,
+		     &ftr_fixup_test_FTR_macros_expected, size) == 0);
+}
+
+static void test_fw_macros(void)
+{
+#ifdef CONFIG_PPC64
+	extern void ftr_fixup_test_FW_FTR_macros;
+	extern void ftr_fixup_test_FW_FTR_macros_expected;
+	unsigned long size = &ftr_fixup_test_FW_FTR_macros_expected -
+			     &ftr_fixup_test_FW_FTR_macros;
+
+	/* The fixups have already been done for us during boot */
+	check(memcmp(&ftr_fixup_test_FW_FTR_macros,
+		     &ftr_fixup_test_FW_FTR_macros_expected, size) == 0);
+#endif
+}
+
+static void test_lwsync_macros(void)
+{
+	extern void lwsync_fixup_test;
+	extern void end_lwsync_fixup_test;
+	extern void lwsync_fixup_test_expected_LWSYNC;
+	extern void lwsync_fixup_test_expected_SYNC;
+	unsigned long size = &end_lwsync_fixup_test -
+			     &lwsync_fixup_test;
+
+	/* The fixups have already been done for us during boot */
+	if (cur_cpu_spec->cpu_features & CPU_FTR_LWSYNC) {
+		check(memcmp(&lwsync_fixup_test,
+			     &lwsync_fixup_test_expected_LWSYNC, size) == 0);
+	} else {
+		check(memcmp(&lwsync_fixup_test,
+			     &lwsync_fixup_test_expected_SYNC, size) == 0);
+	}
+}
+
+static int __init test_feature_fixups(void)
+{
+	printk(KERN_DEBUG "Running feature fixup self-tests ...\n");
+
+	test_basic_patching();
+	test_alternative_patching();
+	test_alternative_case_too_big();
+	test_alternative_case_too_small();
+	test_alternative_case_with_branch();
+	test_alternative_case_with_external_branch();
+	test_cpu_macros();
+	test_fw_macros();
+	test_lwsync_macros();
+
+	return 0;
+}
+late_initcall(test_feature_fixups);
+
+#endif /* CONFIG_FTR_FIXUP_SELFTEST */
diff --git a/arch/powerpc/lib/string.S b/arch/powerpc/lib/string.S
index 49eb1f1a2bb4..64e2e499e32a 100644
--- a/arch/powerpc/lib/string.S
+++ b/arch/powerpc/lib/string.S
@@ -13,13 +13,7 @@
 #include <asm/ppc_asm.h>
 
 	.section __ex_table,"a"
-#ifdef CONFIG_PPC64
-	.align	3
-#define EXTBL	.llong
-#else
-	.align	2
-#define EXTBL	.long
-#endif
+	PPC_LONG_ALIGN
 	.text
 	
 _GLOBAL(strcpy)
@@ -160,9 +154,9 @@ _GLOBAL(__clear_user)
 	blr
 
 	.section __ex_table,"a"
-	EXTBL	11b,90b
-	EXTBL	1b,91b
-	EXTBL	8b,92b
+	PPC_LONG	11b,90b
+	PPC_LONG	1b,91b
+	PPC_LONG	8b,92b
 	.text
 
 _GLOBAL(__strncpy_from_user)
@@ -183,7 +177,7 @@ _GLOBAL(__strncpy_from_user)
 	blr
 
 	.section __ex_table,"a"
-	EXTBL	1b,99b
+	PPC_LONG	1b,99b
 	.text
 
 /* r3 = str, r4 = len (> 0), r5 = top (highest addr) */
@@ -208,4 +202,4 @@ _GLOBAL(__strnlen_user)
 	blr
 
 	.section __ex_table,"a"
-	EXTBL	1b,99b
+	PPC_LONG	1b,99b
diff --git a/arch/powerpc/math-emu/math.c b/arch/powerpc/math-emu/math.c
index 381306bb1590..29e545e0272e 100644
--- a/arch/powerpc/math-emu/math.c
+++ b/arch/powerpc/math-emu/math.c
@@ -230,14 +230,14 @@ do_mathemu(struct pt_regs *regs)
 	case LFD:
 		idx = (insn >> 16) & 0x1f;
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
 		lfd(op0, op1, op2, op3);
 		break;
 	case LFDU:
 		idx = (insn >> 16) & 0x1f;
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
 		lfd(op0, op1, op2, op3);
 		regs->gpr[idx] = (unsigned long)op1;
@@ -245,21 +245,21 @@ do_mathemu(struct pt_regs *regs)
 	case STFD:
 		idx = (insn >> 16) & 0x1f;
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
 		stfd(op0, op1, op2, op3);
 		break;
 	case STFDU:
 		idx = (insn >> 16) & 0x1f;
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
 		stfd(op0, op1, op2, op3);
 		regs->gpr[idx] = (unsigned long)op1;
 		break;
 	case OP63:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
 		fmr(op0, op1, op2, op3);
 		break;
 	default:
@@ -356,28 +356,28 @@ do_mathemu(struct pt_regs *regs)
 
 	switch (type) {
 	case AB:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
-		op2 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 16) & 0x1f);
+		op2 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
 		break;
 
 	case AC:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
-		op2 = (void *)&current->thread.fpr[(insn >>  6) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 16) & 0x1f);
+		op2 = (void *)&current->thread.TS_FPR((insn >>  6) & 0x1f);
 		break;
 
 	case ABC:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
-		op2 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
-		op3 = (void *)&current->thread.fpr[(insn >>  6) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 16) & 0x1f);
+		op2 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
+		op3 = (void *)&current->thread.TS_FPR((insn >>  6) & 0x1f);
 		break;
 
 	case D:
 		idx = (insn >> 16) & 0x1f;
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0) + sdisp);
 		break;
 
@@ -387,27 +387,27 @@ do_mathemu(struct pt_regs *regs)
 			goto illegal;
 
 		sdisp = (insn & 0xffff);
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)(regs->gpr[idx] + sdisp);
 		break;
 
 	case X:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		break;
 
 	case XA:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 16) & 0x1f);
 		break;
 
 	case XB:
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
-		op1 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
+		op1 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
 		break;
 
 	case XE:
 		idx = (insn >> 16) & 0x1f;
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		if (!idx) {
 			if (((insn >> 1) & 0x3ff) == STFIWX)
 				op1 = (void *)(regs->gpr[(insn >> 11) & 0x1f]);
@@ -421,7 +421,7 @@ do_mathemu(struct pt_regs *regs)
 
 	case XEU:
 		idx = (insn >> 16) & 0x1f;
-		op0 = (void *)&current->thread.fpr[(insn >> 21) & 0x1f];
+		op0 = (void *)&current->thread.TS_FPR((insn >> 21) & 0x1f);
 		op1 = (void *)((idx ? regs->gpr[idx] : 0)
 				+ regs->gpr[(insn >> 11) & 0x1f]);
 		break;
@@ -429,8 +429,8 @@ do_mathemu(struct pt_regs *regs)
 	case XCR:
 		op0 = (void *)&regs->ccr;
 		op1 = (void *)((insn >> 23) & 0x7);
-		op2 = (void *)&current->thread.fpr[(insn >> 16) & 0x1f];
-		op3 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
+		op2 = (void *)&current->thread.TS_FPR((insn >> 16) & 0x1f);
+		op3 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
 		break;
 
 	case XCRL:
@@ -450,7 +450,7 @@ do_mathemu(struct pt_regs *regs)
 
 	case XFLB:
 		op0 = (void *)((insn >> 17) & 0xff);
-		op1 = (void *)&current->thread.fpr[(insn >> 11) & 0x1f];
+		op1 = (void *)&current->thread.TS_FPR((insn >> 11) & 0x1f);
 		break;
 
 	default:
diff --git a/arch/powerpc/mm/44x_mmu.c b/arch/powerpc/mm/44x_mmu.c
index 953fb919eb06..98052ac96580 100644
--- a/arch/powerpc/mm/44x_mmu.c
+++ b/arch/powerpc/mm/44x_mmu.c
@@ -27,6 +27,7 @@
 #include <asm/mmu.h>
 #include <asm/system.h>
 #include <asm/page.h>
+#include <asm/cacheflush.h>
 
 #include "mmu_decl.h"
 
@@ -37,11 +38,35 @@ unsigned int tlb_44x_index; /* = 0 */
 unsigned int tlb_44x_hwater = PPC44x_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
 int icache_44x_need_flush;
 
+static void __init ppc44x_update_tlb_hwater(void)
+{
+	extern unsigned int tlb_44x_patch_hwater_D[];
+	extern unsigned int tlb_44x_patch_hwater_I[];
+
+	/* The TLB miss handlers hard codes the watermark in a cmpli
+	 * instruction to improve performances rather than loading it
+	 * from the global variable. Thus, we patch the instructions
+	 * in the 2 TLB miss handlers when updating the value
+	 */
+	tlb_44x_patch_hwater_D[0] = (tlb_44x_patch_hwater_D[0] & 0xffff0000) |
+		tlb_44x_hwater;
+	flush_icache_range((unsigned long)&tlb_44x_patch_hwater_D[0],
+			   (unsigned long)&tlb_44x_patch_hwater_D[1]);
+	tlb_44x_patch_hwater_I[0] = (tlb_44x_patch_hwater_I[0] & 0xffff0000) |
+		tlb_44x_hwater;
+	flush_icache_range((unsigned long)&tlb_44x_patch_hwater_I[0],
+			   (unsigned long)&tlb_44x_patch_hwater_I[1]);
+}
+
 /*
  * "Pins" a 256MB TLB entry in AS0 for kernel lowmem
  */
 static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
 {
+	unsigned int entry = tlb_44x_hwater--;
+
+	ppc44x_update_tlb_hwater();
+
 	__asm__ __volatile__(
 		"tlbwe	%2,%3,%4\n"
 		"tlbwe	%1,%3,%5\n"
@@ -50,7 +75,7 @@ static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
 	: "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
 	  "r" (phys),
 	  "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
-	  "r" (tlb_44x_hwater--), /* slot for this TLB entry */
+	  "r" (entry),
 	  "i" (PPC44x_TLB_PAGEID),
 	  "i" (PPC44x_TLB_XLAT),
 	  "i" (PPC44x_TLB_ATTRIB));
@@ -58,6 +83,8 @@ static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
 
 void __init MMU_init_hw(void)
 {
+	ppc44x_update_tlb_hwater();
+
 	flush_instruction_cache();
 }
 
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index 1c00e0196f6c..e7392b45a5ef 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -12,7 +12,8 @@ obj-y				:= fault.o mem.o \
 				   mmu_context_$(CONFIG_WORD_SIZE).o
 hash-$(CONFIG_PPC_NATIVE)	:= hash_native_64.o
 obj-$(CONFIG_PPC64)		+= hash_utils_64.o \
-				   slb_low.o slb.o stab.o mmap.o $(hash-y)
+				   slb_low.o slb.o stab.o \
+				   gup.o mmap.o $(hash-y)
 obj-$(CONFIG_PPC_STD_MMU_32)	+= ppc_mmu_32.o
 obj-$(CONFIG_PPC_STD_MMU)	+= hash_low_$(CONFIG_WORD_SIZE).o \
 				   tlb_$(CONFIG_WORD_SIZE).o
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 7b2510799266..565b7a237c84 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -100,31 +100,6 @@ static int store_updates_sp(struct pt_regs *regs)
 	return 0;
 }
 
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-static void do_dabr(struct pt_regs *regs, unsigned long address,
-		    unsigned long error_code)
-{
-	siginfo_t info;
-
-	if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code,
-			11, SIGSEGV) == NOTIFY_STOP)
-		return;
-
-	if (debugger_dabr_match(regs))
-		return;
-
-	/* Clear the DABR */
-	set_dabr(0);
-
-	/* Deliver the signal to userspace */
-	info.si_signo = SIGTRAP;
-	info.si_errno = 0;
-	info.si_code = TRAP_HWBKPT;
-	info.si_addr = (void __user *)address;
-	force_sig_info(SIGTRAP, &info, current);
-}
-#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
-
 /*
  * For 600- and 800-family processors, the error_code parameter is DSISR
  * for a data fault, SRR1 for an instruction fault. For 400-family processors
@@ -306,7 +281,8 @@ good_area:
 					flush_dcache_icache_page(page);
 					set_bit(PG_arch_1, &page->flags);
 				}
-				pte_update(ptep, 0, _PAGE_HWEXEC);
+				pte_update(ptep, 0, _PAGE_HWEXEC |
+					   _PAGE_ACCESSED);
 				_tlbie(address, mm->context.id);
 				pte_unmap_unlock(ptep, ptl);
 				up_read(&mm->mmap_sem);
diff --git a/arch/powerpc/mm/gup.c b/arch/powerpc/mm/gup.c
new file mode 100644
index 000000000000..9fdf4d6335e4
--- /dev/null
+++ b/arch/powerpc/mm/gup.c
@@ -0,0 +1,280 @@
+/*
+ * Lockless get_user_pages_fast for powerpc
+ *
+ * Copyright (C) 2008 Nick Piggin
+ * Copyright (C) 2008 Novell Inc.
+ */
+#undef DEBUG
+
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/hugetlb.h>
+#include <linux/vmstat.h>
+#include <linux/pagemap.h>
+#include <linux/rwsem.h>
+#include <asm/pgtable.h>
+
+/*
+ * The performance critical leaf functions are made noinline otherwise gcc
+ * inlines everything into a single function which results in too much
+ * register pressure.
+ */
+static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask, result;
+	pte_t *ptep;
+
+	result = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		result |= _PAGE_RW;
+	mask = result | _PAGE_SPECIAL;
+
+	ptep = pte_offset_kernel(&pmd, addr);
+	do {
+		pte_t pte = *ptep;
+		struct page *page;
+
+		if ((pte_val(pte) & mask) != result)
+			return 0;
+		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+		page = pte_page(pte);
+		if (!page_cache_get_speculative(page))
+			return 0;
+		if (unlikely(pte != *ptep)) {
+			put_page(page);
+			return 0;
+		}
+		pages[*nr] = page;
+		(*nr)++;
+
+	} while (ptep++, addr += PAGE_SIZE, addr != end);
+
+	return 1;
+}
+
+#ifdef CONFIG_HUGETLB_PAGE
+static noinline int gup_huge_pte(pte_t *ptep, struct hstate *hstate,
+				 unsigned long *addr, unsigned long end,
+				 int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	unsigned long pte_end;
+	struct page *head, *page;
+	pte_t pte;
+	int refs;
+
+	pte_end = (*addr + huge_page_size(hstate)) & huge_page_mask(hstate);
+	if (pte_end < end)
+		end = pte_end;
+
+	pte = *ptep;
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+	if ((pte_val(pte) & mask) != mask)
+		return 0;
+	/* hugepages are never "special" */
+	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+	refs = 0;
+	head = pte_page(pte);
+	page = head + ((*addr & ~huge_page_mask(hstate)) >> PAGE_SHIFT);
+	do {
+		VM_BUG_ON(compound_head(page) != head);
+		pages[*nr] = page;
+		(*nr)++;
+		page++;
+		refs++;
+	} while (*addr += PAGE_SIZE, *addr != end);
+
+	if (!page_cache_add_speculative(head, refs)) {
+		*nr -= refs;
+		return 0;
+	}
+	if (unlikely(pte != *ptep)) {
+		/* Could be optimized better */
+		while (*nr) {
+			put_page(page);
+			(*nr)--;
+		}
+	}
+
+	return 1;
+}
+#endif /* CONFIG_HUGETLB_PAGE */
+
+static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
+		int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pmd_t *pmdp;
+
+	pmdp = pmd_offset(&pud, addr);
+	do {
+		pmd_t pmd = *pmdp;
+
+		next = pmd_addr_end(addr, end);
+		if (pmd_none(pmd))
+			return 0;
+		if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+			return 0;
+	} while (pmdp++, addr = next, addr != end);
+
+	return 1;
+}
+
+static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
+		int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pud_t *pudp;
+
+	pudp = pud_offset(&pgd, addr);
+	do {
+		pud_t pud = *pudp;
+
+		next = pud_addr_end(addr, end);
+		if (pud_none(pud))
+			return 0;
+		if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+			return 0;
+	} while (pudp++, addr = next, addr != end);
+
+	return 1;
+}
+
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			struct page **pages)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long addr, len, end;
+	unsigned long next;
+	pgd_t *pgdp;
+	int psize, nr = 0;
+	unsigned int shift;
+
+	pr_debug("%s(%lx,%x,%s)\n", __func__, start, nr_pages, write ? "write" : "read");
+
+	start &= PAGE_MASK;
+	addr = start;
+	len = (unsigned long) nr_pages << PAGE_SHIFT;
+	end = start + len;
+
+	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+					start, len)))
+		goto slow_irqon;
+
+	pr_debug("  aligned: %lx .. %lx\n", start, end);
+
+#ifdef CONFIG_HUGETLB_PAGE
+	/* We bail out on slice boundary crossing when hugetlb is
+	 * enabled in order to not have to deal with two different
+	 * page table formats
+	 */
+	if (addr < SLICE_LOW_TOP) {
+		if (end > SLICE_LOW_TOP)
+			goto slow_irqon;
+
+		if (unlikely(GET_LOW_SLICE_INDEX(addr) !=
+			     GET_LOW_SLICE_INDEX(end - 1)))
+			goto slow_irqon;
+	} else {
+		if (unlikely(GET_HIGH_SLICE_INDEX(addr) !=
+			     GET_HIGH_SLICE_INDEX(end - 1)))
+			goto slow_irqon;
+	}
+#endif /* CONFIG_HUGETLB_PAGE */
+
+	/*
+	 * XXX: batch / limit 'nr', to avoid large irq off latency
+	 * needs some instrumenting to determine the common sizes used by
+	 * important workloads (eg. DB2), and whether limiting the batch size
+	 * will decrease performance.
+	 *
+	 * It seems like we're in the clear for the moment. Direct-IO is
+	 * the main guy that batches up lots of get_user_pages, and even
+	 * they are limited to 64-at-a-time which is not so many.
+	 */
+	/*
+	 * This doesn't prevent pagetable teardown, but does prevent
+	 * the pagetables from being freed on powerpc.
+	 *
+	 * So long as we atomically load page table pointers versus teardown,
+	 * we can follow the address down to the the page and take a ref on it.
+	 */
+	local_irq_disable();
+
+	psize = get_slice_psize(mm, addr);
+	shift = mmu_psize_defs[psize].shift;
+
+#ifdef CONFIG_HUGETLB_PAGE
+	if (unlikely(mmu_huge_psizes[psize])) {
+		pte_t *ptep;
+		unsigned long a = addr;
+		unsigned long sz = ((1UL) << shift);
+		struct hstate *hstate = size_to_hstate(sz);
+
+		BUG_ON(!hstate);
+		/*
+		 * XXX: could be optimized to avoid hstate
+		 * lookup entirely (just use shift)
+		 */
+
+		do {
+			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, a)].shift);
+			ptep = huge_pte_offset(mm, a);
+			pr_debug(" %016lx: huge ptep %p\n", a, ptep);
+			if (!ptep || !gup_huge_pte(ptep, hstate, &a, end, write, pages,
+						   &nr))
+				goto slow;
+		} while (a != end);
+	} else
+#endif /* CONFIG_HUGETLB_PAGE */
+	{
+		pgdp = pgd_offset(mm, addr);
+		do {
+			pgd_t pgd = *pgdp;
+
+			VM_BUG_ON(shift != mmu_psize_defs[get_slice_psize(mm, addr)].shift);
+			pr_debug("  %016lx: normal pgd %p\n", addr, (void *)pgd);
+			next = pgd_addr_end(addr, end);
+			if (pgd_none(pgd))
+				goto slow;
+			if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+				goto slow;
+		} while (pgdp++, addr = next, addr != end);
+	}
+	local_irq_enable();
+
+	VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
+	return nr;
+
+	{
+		int ret;
+
+slow:
+		local_irq_enable();
+slow_irqon:
+		pr_debug("  slow path ! nr = %d\n", nr);
+
+		/* Try to get the remaining pages with get_user_pages */
+		start += nr << PAGE_SHIFT;
+		pages += nr;
+
+		down_read(&mm->mmap_sem);
+		ret = get_user_pages(current, mm, start,
+			(end - start) >> PAGE_SHIFT, write, 0, pages, NULL);
+		up_read(&mm->mmap_sem);
+
+		/* Have to be a bit careful with return values */
+		if (nr > 0) {
+			if (ret < 0)
+				ret = nr;
+			else
+				ret += nr;
+		}
+
+		return ret;
+	}
+}
diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S
index 70f4c833fa32..a719f53921a5 100644
--- a/arch/powerpc/mm/hash_low_64.S
+++ b/arch/powerpc/mm/hash_low_64.S
@@ -388,7 +388,7 @@ _GLOBAL(__hash_page_4K)
 	 */
 	rlwinm	r30,r4,32-9+7,31-7,31-7	/* _PAGE_RW -> _PAGE_DIRTY */
 	or	r30,r30,r31
-	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
+	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED
 	oris	r30,r30,_PAGE_COMBO@h
 	/* Write the linux PTE atomically (setting busy) */
 	stdcx.	r30,0,r6
@@ -468,7 +468,7 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
 	 * go to out-of-line code to try to modify the HPTE. We look for
 	 * the bit at (1 >> (index + 32))
 	 */
-	andi.	r0,r31,_PAGE_HASHPTE
+	rldicl.	r0,r31,64-12,48
 	li	r26,0			/* Default hidx */
 	beq	htab_insert_pte
 
@@ -726,11 +726,11 @@ BEGIN_FTR_SECTION
 	bne-	ht64_bail_ok
 END_FTR_SECTION_IFCLR(CPU_FTR_CI_LARGE_PAGE)
 	/* Prepare new PTE value (turn access RW into DIRTY, then
-	 * add BUSY,HASHPTE and ACCESSED)
+	 * add BUSY and ACCESSED)
 	 */
 	rlwinm	r30,r4,32-9+7,31-7,31-7	/* _PAGE_RW -> _PAGE_DIRTY */
 	or	r30,r30,r31
-	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED | _PAGE_HASHPTE
+	ori	r30,r30,_PAGE_BUSY | _PAGE_ACCESSED
 	/* Write the linux PTE atomically (setting busy) */
 	stdcx.	r30,0,r6
 	bne-	1b
@@ -798,18 +798,21 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE)
 	/* Check if we may already be in the hashtable, in this case, we
 	 * go to out-of-line code to try to modify the HPTE
 	 */
-	andi.	r0,r31,_PAGE_HASHPTE
+	rldicl.	r0,r31,64-12,48
 	bne	ht64_modify_pte
 
 ht64_insert_pte:
 	/* Clear hpte bits in new pte (we also clear BUSY btw) and
-	 * add _PAGE_HASHPTE
+	 * add _PAGE_HPTE_SUB0
 	 */
 	lis	r0,_PAGE_HPTEFLAGS@h
 	ori	r0,r0,_PAGE_HPTEFLAGS@l
 	andc	r30,r30,r0
+#ifdef CONFIG_PPC_64K_PAGES
+	oris	r30,r30,_PAGE_HPTE_SUB0@h
+#else
 	ori	r30,r30,_PAGE_HASHPTE
-
+#endif
 	/* Phyical address in r5 */
 	rldicl	r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT
 	sldi	r5,r5,PAGE_SHIFT
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 0f2d239d94c4..5ce5a4dcd008 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -68,6 +68,7 @@
 
 #define KB (1024)
 #define MB (1024*KB)
+#define GB (1024L*MB)
 
 /*
  * Note:  pte   --> Linux PTE
@@ -102,7 +103,6 @@ int mmu_kernel_ssize = MMU_SEGSIZE_256M;
 int mmu_highuser_ssize = MMU_SEGSIZE_256M;
 u16 mmu_slb_size = 64;
 #ifdef CONFIG_HUGETLB_PAGE
-int mmu_huge_psize = MMU_PAGE_16M;
 unsigned int HPAGE_SHIFT;
 #endif
 #ifdef CONFIG_PPC_64K_PAGES
@@ -120,7 +120,7 @@ static DEFINE_SPINLOCK(linear_map_hash_lock);
 
 /* Pre-POWER4 CPUs (4k pages only)
  */
-struct mmu_psize_def mmu_psize_defaults_old[] = {
+static struct mmu_psize_def mmu_psize_defaults_old[] = {
 	[MMU_PAGE_4K] = {
 		.shift	= 12,
 		.sllp	= 0,
@@ -134,7 +134,7 @@ struct mmu_psize_def mmu_psize_defaults_old[] = {
  *
  * Support for 16Mb large pages
  */
-struct mmu_psize_def mmu_psize_defaults_gp[] = {
+static struct mmu_psize_def mmu_psize_defaults_gp[] = {
 	[MMU_PAGE_4K] = {
 		.shift	= 12,
 		.sllp	= 0,
@@ -329,6 +329,44 @@ static int __init htab_dt_scan_page_sizes(unsigned long node,
 	return 0;
 }
 
+/* Scan for 16G memory blocks that have been set aside for huge pages
+ * and reserve those blocks for 16G huge pages.
+ */
+static int __init htab_dt_scan_hugepage_blocks(unsigned long node,
+					const char *uname, int depth,
+					void *data) {
+	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+	unsigned long *addr_prop;
+	u32 *page_count_prop;
+	unsigned int expected_pages;
+	long unsigned int phys_addr;
+	long unsigned int block_size;
+
+	/* We are scanning "memory" nodes only */
+	if (type == NULL || strcmp(type, "memory") != 0)
+		return 0;
+
+	/* This property is the log base 2 of the number of virtual pages that
+	 * will represent this memory block. */
+	page_count_prop = of_get_flat_dt_prop(node, "ibm,expected#pages", NULL);
+	if (page_count_prop == NULL)
+		return 0;
+	expected_pages = (1 << page_count_prop[0]);
+	addr_prop = of_get_flat_dt_prop(node, "reg", NULL);
+	if (addr_prop == NULL)
+		return 0;
+	phys_addr = addr_prop[0];
+	block_size = addr_prop[1];
+	if (block_size != (16 * GB))
+		return 0;
+	printk(KERN_INFO "Huge page(16GB) memory: "
+			"addr = 0x%lX size = 0x%lX pages = %d\n",
+			phys_addr, block_size, expected_pages);
+	lmb_reserve(phys_addr, block_size * expected_pages);
+	add_gpage(phys_addr, block_size, expected_pages);
+	return 0;
+}
+
 static void __init htab_init_page_sizes(void)
 {
 	int rc;
@@ -418,15 +456,18 @@ static void __init htab_init_page_sizes(void)
 	       );
 
 #ifdef CONFIG_HUGETLB_PAGE
-	/* Init large page size. Currently, we pick 16M or 1M depending
+	/* Reserve 16G huge page memory sections for huge pages */
+	of_scan_flat_dt(htab_dt_scan_hugepage_blocks, NULL);
+
+/* Set default large page size. Currently, we pick 16M or 1M depending
 	 * on what is available
 	 */
 	if (mmu_psize_defs[MMU_PAGE_16M].shift)
-		set_huge_psize(MMU_PAGE_16M);
+		HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_16M].shift;
 	/* With 4k/4level pagetables, we can't (for now) cope with a
 	 * huge page size < PMD_SIZE */
 	else if (mmu_psize_defs[MMU_PAGE_1M].shift)
-		set_huge_psize(MMU_PAGE_1M);
+		HPAGE_SHIFT = mmu_psize_defs[MMU_PAGE_1M].shift;
 #endif /* CONFIG_HUGETLB_PAGE */
 }
 
@@ -533,8 +574,6 @@ void __init htab_initialize(void)
 	unsigned long base = 0, size = 0, limit;
 	int i;
 
-	extern unsigned long tce_alloc_start, tce_alloc_end;
-
 	DBG(" -> htab_initialize()\n");
 
 	/* Initialize segment sizes */
@@ -697,6 +736,28 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap)
 	return pp;
 }
 
+#ifdef CONFIG_PPC_MM_SLICES
+unsigned int get_paca_psize(unsigned long addr)
+{
+	unsigned long index, slices;
+
+	if (addr < SLICE_LOW_TOP) {
+		slices = get_paca()->context.low_slices_psize;
+		index = GET_LOW_SLICE_INDEX(addr);
+	} else {
+		slices = get_paca()->context.high_slices_psize;
+		index = GET_HIGH_SLICE_INDEX(addr);
+	}
+	return (slices >> (index * 4)) & 0xF;
+}
+
+#else
+unsigned int get_paca_psize(unsigned long addr)
+{
+	return get_paca()->context.user_psize;
+}
+#endif
+
 /*
  * Demote a segment to using 4k pages.
  * For now this makes the whole process use 4k pages.
@@ -704,13 +765,13 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap)
 #ifdef CONFIG_PPC_64K_PAGES
 void demote_segment_4k(struct mm_struct *mm, unsigned long addr)
 {
-	if (mm->context.user_psize == MMU_PAGE_4K)
+	if (get_slice_psize(mm, addr) == MMU_PAGE_4K)
 		return;
-	slice_set_user_psize(mm, MMU_PAGE_4K);
+	slice_set_range_psize(mm, addr, 1, MMU_PAGE_4K);
 #ifdef CONFIG_SPU_BASE
 	spu_flush_all_slbs(mm);
 #endif
-	if (get_paca()->context.user_psize != MMU_PAGE_4K) {
+	if (get_paca_psize(addr) != MMU_PAGE_4K) {
 		get_paca()->context = mm->context;
 		slb_flush_and_rebolt();
 	}
@@ -794,11 +855,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 			DBG_LOW(" user region with no mm !\n");
 			return 1;
 		}
-#ifdef CONFIG_PPC_MM_SLICES
 		psize = get_slice_psize(mm, ea);
-#else
-		psize = mm->context.user_psize;
-#endif
 		ssize = user_segment_size(ea);
 		vsid = get_vsid(mm->context.id, ea, ssize);
 		break;
@@ -831,7 +888,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 
 #ifdef CONFIG_HUGETLB_PAGE
 	/* Handle hugepage regions */
-	if (HPAGE_SHIFT && psize == mmu_huge_psize) {
+	if (HPAGE_SHIFT && mmu_huge_psizes[psize]) {
 		DBG_LOW(" -> huge page !\n");
 		return hash_huge_page(mm, access, ea, vsid, local, trap);
 	}
@@ -870,7 +927,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 	/* Do actual hashing */
 #ifdef CONFIG_PPC_64K_PAGES
 	/* If _PAGE_4K_PFN is set, make sure this is a 4k segment */
-	if (pte_val(*ptep) & _PAGE_4K_PFN) {
+	if ((pte_val(*ptep) & _PAGE_4K_PFN) && psize == MMU_PAGE_64K) {
 		demote_segment_4k(mm, ea);
 		psize = MMU_PAGE_4K;
 	}
@@ -899,7 +956,7 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 		}
 	}
 	if (user_region) {
-		if (psize != get_paca()->context.user_psize) {
+		if (psize != get_paca_psize(ea)) {
 			get_paca()->context = mm->context;
 			slb_flush_and_rebolt();
 		}
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index a02266dad215..f1c2d55b4377 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -24,21 +24,43 @@
 #include <asm/cputable.h>
 #include <asm/spu.h>
 
-#define HPAGE_SHIFT_64K	16
-#define HPAGE_SHIFT_16M	24
+#define PAGE_SHIFT_64K	16
+#define PAGE_SHIFT_16M	24
+#define PAGE_SHIFT_16G	34
 
 #define NUM_LOW_AREAS	(0x100000000UL >> SID_SHIFT)
 #define NUM_HIGH_AREAS	(PGTABLE_RANGE >> HTLB_AREA_SHIFT)
+#define MAX_NUMBER_GPAGES	1024
 
-unsigned int hugepte_shift;
-#define PTRS_PER_HUGEPTE	(1 << hugepte_shift)
-#define HUGEPTE_TABLE_SIZE	(sizeof(pte_t) << hugepte_shift)
+/* Tracks the 16G pages after the device tree is scanned and before the
+ * huge_boot_pages list is ready.  */
+static unsigned long gpage_freearray[MAX_NUMBER_GPAGES];
+static unsigned nr_gpages;
 
-#define HUGEPD_SHIFT		(HPAGE_SHIFT + hugepte_shift)
-#define HUGEPD_SIZE		(1UL << HUGEPD_SHIFT)
-#define HUGEPD_MASK		(~(HUGEPD_SIZE-1))
+/* Array of valid huge page sizes - non-zero value(hugepte_shift) is
+ * stored for the huge page sizes that are valid.
+ */
+unsigned int mmu_huge_psizes[MMU_PAGE_COUNT] = { }; /* initialize all to 0 */
+
+#define hugepte_shift			mmu_huge_psizes
+#define PTRS_PER_HUGEPTE(psize)		(1 << hugepte_shift[psize])
+#define HUGEPTE_TABLE_SIZE(psize)	(sizeof(pte_t) << hugepte_shift[psize])
+
+#define HUGEPD_SHIFT(psize)		(mmu_psize_to_shift(psize) \
+						+ hugepte_shift[psize])
+#define HUGEPD_SIZE(psize)		(1UL << HUGEPD_SHIFT(psize))
+#define HUGEPD_MASK(psize)		(~(HUGEPD_SIZE(psize)-1))
+
+/* Subtract one from array size because we don't need a cache for 4K since
+ * is not a huge page size */
+#define huge_pgtable_cache(psize)	(pgtable_cache[HUGEPTE_CACHE_NUM \
+							+ psize-1])
+#define HUGEPTE_CACHE_NAME(psize)	(huge_pgtable_cache_name[psize])
 
-#define huge_pgtable_cache	(pgtable_cache[HUGEPTE_CACHE_NUM])
+static const char *huge_pgtable_cache_name[MMU_PAGE_COUNT] = {
+	"unused_4K", "hugepte_cache_64K", "unused_64K_AP",
+	"hugepte_cache_1M", "hugepte_cache_16M", "hugepte_cache_16G"
+};
 
 /* Flag to mark huge PD pointers.  This means pmd_bad() and pud_bad()
  * will choke on pointers to hugepte tables, which is handy for
@@ -49,24 +71,49 @@ typedef struct { unsigned long pd; } hugepd_t;
 
 #define hugepd_none(hpd)	((hpd).pd == 0)
 
+static inline int shift_to_mmu_psize(unsigned int shift)
+{
+	switch (shift) {
+#ifndef CONFIG_PPC_64K_PAGES
+	case PAGE_SHIFT_64K:
+	    return MMU_PAGE_64K;
+#endif
+	case PAGE_SHIFT_16M:
+	    return MMU_PAGE_16M;
+	case PAGE_SHIFT_16G:
+	    return MMU_PAGE_16G;
+	}
+	return -1;
+}
+
+static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize)
+{
+	if (mmu_psize_defs[mmu_psize].shift)
+		return mmu_psize_defs[mmu_psize].shift;
+	BUG();
+}
+
 static inline pte_t *hugepd_page(hugepd_t hpd)
 {
 	BUG_ON(!(hpd.pd & HUGEPD_OK));
 	return (pte_t *)(hpd.pd & ~HUGEPD_OK);
 }
 
-static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr)
+static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr,
+				    struct hstate *hstate)
 {
-	unsigned long idx = ((addr >> HPAGE_SHIFT) & (PTRS_PER_HUGEPTE-1));
+	unsigned int shift = huge_page_shift(hstate);
+	int psize = shift_to_mmu_psize(shift);
+	unsigned long idx = ((addr >> shift) & (PTRS_PER_HUGEPTE(psize)-1));
 	pte_t *dir = hugepd_page(*hpdp);
 
 	return dir + idx;
 }
 
 static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
-			   unsigned long address)
+			   unsigned long address, unsigned int psize)
 {
-	pte_t *new = kmem_cache_alloc(huge_pgtable_cache,
+	pte_t *new = kmem_cache_zalloc(huge_pgtable_cache(psize),
 				      GFP_KERNEL|__GFP_REPEAT);
 
 	if (! new)
@@ -74,7 +121,7 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 
 	spin_lock(&mm->page_table_lock);
 	if (!hugepd_none(*hpdp))
-		kmem_cache_free(huge_pgtable_cache, new);
+		kmem_cache_free(huge_pgtable_cache(psize), new);
 	else
 		hpdp->pd = (unsigned long)new | HUGEPD_OK;
 	spin_unlock(&mm->page_table_lock);
@@ -83,27 +130,60 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
 
 /* Base page size affects how we walk hugetlb page tables */
 #ifdef CONFIG_PPC_64K_PAGES
-#define hpmd_offset(pud, addr)		pmd_offset(pud, addr)
-#define hpmd_alloc(mm, pud, addr)	pmd_alloc(mm, pud, addr)
+#define hpmd_offset(pud, addr, h)	pmd_offset(pud, addr)
+#define hpmd_alloc(mm, pud, addr, h)	pmd_alloc(mm, pud, addr)
 #else
 static inline
-pmd_t *hpmd_offset(pud_t *pud, unsigned long addr)
+pmd_t *hpmd_offset(pud_t *pud, unsigned long addr, struct hstate *hstate)
 {
-	if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
+	if (huge_page_shift(hstate) == PAGE_SHIFT_64K)
 		return pmd_offset(pud, addr);
 	else
 		return (pmd_t *) pud;
 }
 static inline
-pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr)
+pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr,
+		  struct hstate *hstate)
 {
-	if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
+	if (huge_page_shift(hstate) == PAGE_SHIFT_64K)
 		return pmd_alloc(mm, pud, addr);
 	else
 		return (pmd_t *) pud;
 }
 #endif
 
+/* Build list of addresses of gigantic pages.  This function is used in early
+ * boot before the buddy or bootmem allocator is setup.
+ */
+void add_gpage(unsigned long addr, unsigned long page_size,
+	unsigned long number_of_pages)
+{
+	if (!addr)
+		return;
+	while (number_of_pages > 0) {
+		gpage_freearray[nr_gpages] = addr;
+		nr_gpages++;
+		number_of_pages--;
+		addr += page_size;
+	}
+}
+
+/* Moves the gigantic page addresses from the temporary list to the
+ * huge_boot_pages list.
+ */
+int alloc_bootmem_huge_page(struct hstate *hstate)
+{
+	struct huge_bootmem_page *m;
+	if (nr_gpages == 0)
+		return 0;
+	m = phys_to_virt(gpage_freearray[--nr_gpages]);
+	gpage_freearray[nr_gpages] = 0;
+	list_add(&m->list, &huge_boot_pages);
+	m->hstate = hstate;
+	return 1;
+}
+
+
 /* Modelled after find_linux_pte() */
 pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 {
@@ -111,39 +191,52 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 	pud_t *pu;
 	pmd_t *pm;
 
-	BUG_ON(get_slice_psize(mm, addr) != mmu_huge_psize);
+	unsigned int psize;
+	unsigned int shift;
+	unsigned long sz;
+	struct hstate *hstate;
+	psize = get_slice_psize(mm, addr);
+	shift = mmu_psize_to_shift(psize);
+	sz = ((1UL) << shift);
+	hstate = size_to_hstate(sz);
 
-	addr &= HPAGE_MASK;
+	addr &= hstate->mask;
 
 	pg = pgd_offset(mm, addr);
 	if (!pgd_none(*pg)) {
 		pu = pud_offset(pg, addr);
 		if (!pud_none(*pu)) {
-			pm = hpmd_offset(pu, addr);
+			pm = hpmd_offset(pu, addr, hstate);
 			if (!pmd_none(*pm))
-				return hugepte_offset((hugepd_t *)pm, addr);
+				return hugepte_offset((hugepd_t *)pm, addr,
+						      hstate);
 		}
 	}
 
 	return NULL;
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pg;
 	pud_t *pu;
 	pmd_t *pm;
 	hugepd_t *hpdp = NULL;
+	struct hstate *hstate;
+	unsigned int psize;
+	hstate = size_to_hstate(sz);
 
-	BUG_ON(get_slice_psize(mm, addr) != mmu_huge_psize);
+	psize = get_slice_psize(mm, addr);
+	BUG_ON(!mmu_huge_psizes[psize]);
 
-	addr &= HPAGE_MASK;
+	addr &= hstate->mask;
 
 	pg = pgd_offset(mm, addr);
 	pu = pud_alloc(mm, pg, addr);
 
 	if (pu) {
-		pm = hpmd_alloc(mm, pu, addr);
+		pm = hpmd_alloc(mm, pu, addr, hstate);
 		if (pm)
 			hpdp = (hugepd_t *)pm;
 	}
@@ -151,10 +244,10 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
 	if (! hpdp)
 		return NULL;
 
-	if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr))
+	if (hugepd_none(*hpdp) && __hugepte_alloc(mm, hpdp, addr, psize))
 		return NULL;
 
-	return hugepte_offset(hpdp, addr);
+	return hugepte_offset(hpdp, addr, hstate);
 }
 
 int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
@@ -162,19 +255,22 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
 	return 0;
 }
 
-static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp)
+static void free_hugepte_range(struct mmu_gather *tlb, hugepd_t *hpdp,
+			       unsigned int psize)
 {
 	pte_t *hugepte = hugepd_page(*hpdp);
 
 	hpdp->pd = 0;
 	tlb->need_flush = 1;
-	pgtable_free_tlb(tlb, pgtable_free_cache(hugepte, HUGEPTE_CACHE_NUM,
+	pgtable_free_tlb(tlb, pgtable_free_cache(hugepte,
+						 HUGEPTE_CACHE_NUM+psize-1,
 						 PGF_CACHENUM_MASK));
 }
 
 static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 				   unsigned long addr, unsigned long end,
-				   unsigned long floor, unsigned long ceiling)
+				   unsigned long floor, unsigned long ceiling,
+				   unsigned int psize)
 {
 	pmd_t *pmd;
 	unsigned long next;
@@ -186,7 +282,7 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 		next = pmd_addr_end(addr, end);
 		if (pmd_none(*pmd))
 			continue;
-		free_hugepte_range(tlb, (hugepd_t *)pmd);
+		free_hugepte_range(tlb, (hugepd_t *)pmd, psize);
 	} while (pmd++, addr = next, addr != end);
 
 	start &= PUD_MASK;
@@ -212,6 +308,9 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 	pud_t *pud;
 	unsigned long next;
 	unsigned long start;
+	unsigned int shift;
+	unsigned int psize = get_slice_psize(tlb->mm, addr);
+	shift = mmu_psize_to_shift(psize);
 
 	start = addr;
 	pud = pud_offset(pgd, addr);
@@ -220,16 +319,18 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 #ifdef CONFIG_PPC_64K_PAGES
 		if (pud_none_or_clear_bad(pud))
 			continue;
-		hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
+		hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling,
+				       psize);
 #else
-		if (HPAGE_SHIFT == HPAGE_SHIFT_64K) {
+		if (shift == PAGE_SHIFT_64K) {
 			if (pud_none_or_clear_bad(pud))
 				continue;
-			hugetlb_free_pmd_range(tlb, pud, addr, next, floor, ceiling);
+			hugetlb_free_pmd_range(tlb, pud, addr, next, floor,
+					       ceiling, psize);
 		} else {
 			if (pud_none(*pud))
 				continue;
-			free_hugepte_range(tlb, (hugepd_t *)pud);
+			free_hugepte_range(tlb, (hugepd_t *)pud, psize);
 		}
 #endif
 	} while (pud++, addr = next, addr != end);
@@ -255,7 +356,7 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
  *
  * Must be called with pagetable lock held.
  */
-void hugetlb_free_pgd_range(struct mmu_gather **tlb,
+void hugetlb_free_pgd_range(struct mmu_gather *tlb,
 			    unsigned long addr, unsigned long end,
 			    unsigned long floor, unsigned long ceiling)
 {
@@ -297,31 +398,33 @@ void hugetlb_free_pgd_range(struct mmu_gather **tlb,
 	 * now has no other vmas using it, so can be freed, we don't
 	 * bother to round floor or end up - the tests don't need that.
 	 */
+	unsigned int psize = get_slice_psize(tlb->mm, addr);
 
-	addr &= HUGEPD_MASK;
+	addr &= HUGEPD_MASK(psize);
 	if (addr < floor) {
-		addr += HUGEPD_SIZE;
+		addr += HUGEPD_SIZE(psize);
 		if (!addr)
 			return;
 	}
 	if (ceiling) {
-		ceiling &= HUGEPD_MASK;
+		ceiling &= HUGEPD_MASK(psize);
 		if (!ceiling)
 			return;
 	}
 	if (end - 1 > ceiling - 1)
-		end -= HUGEPD_SIZE;
+		end -= HUGEPD_SIZE(psize);
 	if (addr > end - 1)
 		return;
 
 	start = addr;
-	pgd = pgd_offset((*tlb)->mm, addr);
+	pgd = pgd_offset(tlb->mm, addr);
 	do {
-		BUG_ON(get_slice_psize((*tlb)->mm, addr) != mmu_huge_psize);
+		psize = get_slice_psize(tlb->mm, addr);
+		BUG_ON(!mmu_huge_psizes[psize]);
 		next = pgd_addr_end(addr, end);
 		if (pgd_none_or_clear_bad(pgd))
 			continue;
-		hugetlb_free_pud_range(*tlb, pgd, addr, next, floor, ceiling);
+		hugetlb_free_pud_range(tlb, pgd, addr, next, floor, ceiling);
 	} while (pgd++, addr = next, addr != end);
 }
 
@@ -334,7 +437,11 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
 		 * necessary anymore if we make hpte_need_flush() get the
 		 * page size from the slices
 		 */
-		pte_update(mm, addr & HPAGE_MASK, ptep, ~0UL, 1);
+		unsigned int psize = get_slice_psize(mm, addr);
+		unsigned int shift = mmu_psize_to_shift(psize);
+		unsigned long sz = ((1UL) << shift);
+		struct hstate *hstate = size_to_hstate(sz);
+		pte_update(mm, addr & hstate->mask, ptep, ~0UL, 1);
 	}
 	*ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
 }
@@ -351,14 +458,19 @@ follow_huge_addr(struct mm_struct *mm, unsigned long address, int write)
 {
 	pte_t *ptep;
 	struct page *page;
+	unsigned int mmu_psize = get_slice_psize(mm, address);
 
-	if (get_slice_psize(mm, address) != mmu_huge_psize)
+	/* Verify it is a huge page else bail. */
+	if (!mmu_huge_psizes[mmu_psize])
 		return ERR_PTR(-EINVAL);
 
 	ptep = huge_pte_offset(mm, address);
 	page = pte_page(*ptep);
-	if (page)
-		page += (address % HPAGE_SIZE) / PAGE_SIZE;
+	if (page) {
+		unsigned int shift = mmu_psize_to_shift(mmu_psize);
+		unsigned long sz = ((1UL) << shift);
+		page += (address % sz) / PAGE_SIZE;
+	}
 
 	return page;
 }
@@ -368,6 +480,11 @@ int pmd_huge(pmd_t pmd)
 	return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 		pmd_t *pmd, int write)
@@ -381,15 +498,16 @@ unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 					unsigned long len, unsigned long pgoff,
 					unsigned long flags)
 {
-	return slice_get_unmapped_area(addr, len, flags,
-				       mmu_huge_psize, 1, 0);
+	struct hstate *hstate = hstate_file(file);
+	int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
+	return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1, 0);
 }
 
 /*
  * Called by asm hashtable.S for doing lazy icache flush
  */
 static unsigned int hash_huge_page_do_lazy_icache(unsigned long rflags,
-						  pte_t pte, int trap)
+					pte_t pte, int trap, unsigned long sz)
 {
 	struct page *page;
 	int i;
@@ -402,7 +520,7 @@ static unsigned int hash_huge_page_do_lazy_icache(unsigned long rflags,
 	/* page is dirty */
 	if (!test_bit(PG_arch_1, &page->flags) && !PageReserved(page)) {
 		if (trap == 0x400) {
-			for (i = 0; i < (HPAGE_SIZE / PAGE_SIZE); i++)
+			for (i = 0; i < (sz / PAGE_SIZE); i++)
 				__flush_dcache_icache(page_address(page+i));
 			set_bit(PG_arch_1, &page->flags);
 		} else {
@@ -418,11 +536,16 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
 {
 	pte_t *ptep;
 	unsigned long old_pte, new_pte;
-	unsigned long va, rflags, pa;
+	unsigned long va, rflags, pa, sz;
 	long slot;
 	int err = 1;
 	int ssize = user_segment_size(ea);
+	unsigned int mmu_psize;
+	int shift;
+	mmu_psize = get_slice_psize(mm, ea);
 
+	if (!mmu_huge_psizes[mmu_psize])
+		goto out;
 	ptep = huge_pte_offset(mm, ea);
 
 	/* Search the Linux page table for a match with va */
@@ -458,38 +581,39 @@ int hash_huge_page(struct mm_struct *mm, unsigned long access,
 		old_pte = pte_val(*ptep);
 		if (old_pte & _PAGE_BUSY)
 			goto out;
-		new_pte = old_pte | _PAGE_BUSY |
-			_PAGE_ACCESSED | _PAGE_HASHPTE;
+		new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
 	} while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
 					 old_pte, new_pte));
 
 	rflags = 0x2 | (!(new_pte & _PAGE_RW));
  	/* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */
 	rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N);
+	shift = mmu_psize_to_shift(mmu_psize);
+	sz = ((1UL) << shift);
 	if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
 		/* No CPU has hugepages but lacks no execute, so we
 		 * don't need to worry about that case */
 		rflags = hash_huge_page_do_lazy_icache(rflags, __pte(old_pte),
-						       trap);
+						       trap, sz);
 
 	/* Check if pte already has an hpte (case 2) */
 	if (unlikely(old_pte & _PAGE_HASHPTE)) {
 		/* There MIGHT be an HPTE for this pte */
 		unsigned long hash, slot;
 
-		hash = hpt_hash(va, HPAGE_SHIFT, ssize);
+		hash = hpt_hash(va, shift, ssize);
 		if (old_pte & _PAGE_F_SECOND)
 			hash = ~hash;
 		slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
 		slot += (old_pte & _PAGE_F_GIX) >> 12;
 
-		if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_huge_psize,
+		if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_psize,
 					 ssize, local) == -1)
 			old_pte &= ~_PAGE_HPTEFLAGS;
 	}
 
 	if (likely(!(old_pte & _PAGE_HASHPTE))) {
-		unsigned long hash = hpt_hash(va, HPAGE_SHIFT, ssize);
+		unsigned long hash = hpt_hash(va, shift, ssize);
 		unsigned long hpte_group;
 
 		pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
@@ -499,16 +623,18 @@ repeat:
 			      HPTES_PER_GROUP) & ~0x7UL;
 
 		/* clear HPTE slot informations in new PTE */
+#ifdef CONFIG_PPC_64K_PAGES
+		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HPTE_SUB0;
+#else
 		new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
-
+#endif
 		/* Add in WIMG bits */
-		/* XXX We should store these in the pte */
-		/* --BenH: I think they are ... */
-		rflags |= _PAGE_COHERENT;
+		rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE |
+				      _PAGE_COHERENT | _PAGE_GUARDED));
 
 		/* Insert into the hash table, primary slot */
 		slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0,
-					  mmu_huge_psize, ssize);
+					  mmu_psize, ssize);
 
 		/* Primary is full, try the secondary */
 		if (unlikely(slot == -1)) {
@@ -516,7 +642,7 @@ repeat:
 				      HPTES_PER_GROUP) & ~0x7UL; 
 			slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags,
 						  HPTE_V_SECONDARY,
-						  mmu_huge_psize, ssize);
+						  mmu_psize, ssize);
 			if (slot == -1) {
 				if (mftb() & 0x1)
 					hpte_group = ((hash & htab_hash_mask) *
@@ -548,45 +674,54 @@ void set_huge_psize(int psize)
 {
 	/* Check that it is a page size supported by the hardware and
 	 * that it fits within pagetable limits. */
-	if (mmu_psize_defs[psize].shift && mmu_psize_defs[psize].shift < SID_SHIFT &&
+	if (mmu_psize_defs[psize].shift &&
+		mmu_psize_defs[psize].shift < SID_SHIFT_1T &&
 		(mmu_psize_defs[psize].shift > MIN_HUGEPTE_SHIFT ||
-			mmu_psize_defs[psize].shift == HPAGE_SHIFT_64K)) {
-		HPAGE_SHIFT = mmu_psize_defs[psize].shift;
-		mmu_huge_psize = psize;
-#ifdef CONFIG_PPC_64K_PAGES
-		hugepte_shift = (PMD_SHIFT-HPAGE_SHIFT);
-#else
-		if (HPAGE_SHIFT == HPAGE_SHIFT_64K)
-			hugepte_shift = (PMD_SHIFT-HPAGE_SHIFT);
-		else
-			hugepte_shift = (PUD_SHIFT-HPAGE_SHIFT);
-#endif
-
+		 mmu_psize_defs[psize].shift == PAGE_SHIFT_64K ||
+		 mmu_psize_defs[psize].shift == PAGE_SHIFT_16G)) {
+		/* Return if huge page size has already been setup or is the
+		 * same as the base page size. */
+		if (mmu_huge_psizes[psize] ||
+		   mmu_psize_defs[psize].shift == PAGE_SHIFT)
+			return;
+		hugetlb_add_hstate(mmu_psize_defs[psize].shift - PAGE_SHIFT);
+
+		switch (mmu_psize_defs[psize].shift) {
+		case PAGE_SHIFT_64K:
+		    /* We only allow 64k hpages with 4k base page,
+		     * which was checked above, and always put them
+		     * at the PMD */
+		    hugepte_shift[psize] = PMD_SHIFT;
+		    break;
+		case PAGE_SHIFT_16M:
+		    /* 16M pages can be at two different levels
+		     * of pagestables based on base page size */
+		    if (PAGE_SHIFT == PAGE_SHIFT_64K)
+			    hugepte_shift[psize] = PMD_SHIFT;
+		    else /* 4k base page */
+			    hugepte_shift[psize] = PUD_SHIFT;
+		    break;
+		case PAGE_SHIFT_16G:
+		    /* 16G pages are always at PGD level */
+		    hugepte_shift[psize] = PGDIR_SHIFT;
+		    break;
+		}
+		hugepte_shift[psize] -= mmu_psize_defs[psize].shift;
 	} else
-		HPAGE_SHIFT = 0;
+		hugepte_shift[psize] = 0;
 }
 
 static int __init hugepage_setup_sz(char *str)
 {
 	unsigned long long size;
-	int mmu_psize = -1;
+	int mmu_psize;
 	int shift;
 
 	size = memparse(str, &str);
 
 	shift = __ffs(size);
-	switch (shift) {
-#ifndef CONFIG_PPC_64K_PAGES
-	case HPAGE_SHIFT_64K:
-		mmu_psize = MMU_PAGE_64K;
-		break;
-#endif
-	case HPAGE_SHIFT_16M:
-		mmu_psize = MMU_PAGE_16M;
-		break;
-	}
-
-	if (mmu_psize >=0 && mmu_psize_defs[mmu_psize].shift)
+	mmu_psize = shift_to_mmu_psize(shift);
+	if (mmu_psize >= 0 && mmu_psize_defs[mmu_psize].shift)
 		set_huge_psize(mmu_psize);
 	else
 		printk(KERN_WARNING "Invalid huge page size specified(%llu)\n", size);
@@ -595,23 +730,40 @@ static int __init hugepage_setup_sz(char *str)
 }
 __setup("hugepagesz=", hugepage_setup_sz);
 
-static void zero_ctor(struct kmem_cache *cache, void *addr)
-{
-	memset(addr, 0, kmem_cache_size(cache));
-}
-
 static int __init hugetlbpage_init(void)
 {
+	unsigned int psize;
+
 	if (!cpu_has_feature(CPU_FTR_16M_PAGE))
 		return -ENODEV;
 
-	huge_pgtable_cache = kmem_cache_create("hugepte_cache",
-					       HUGEPTE_TABLE_SIZE,
-					       HUGEPTE_TABLE_SIZE,
-					       0,
-					       zero_ctor);
-	if (! huge_pgtable_cache)
-		panic("hugetlbpage_init(): could not create hugepte cache\n");
+	/* Add supported huge page sizes.  Need to change HUGE_MAX_HSTATE
+	 * and adjust PTE_NONCACHE_NUM if the number of supported huge page
+	 * sizes changes.
+	 */
+	set_huge_psize(MMU_PAGE_16M);
+	set_huge_psize(MMU_PAGE_16G);
+
+	/* Temporarily disable support for 64K huge pages when 64K SPU local
+	 * store support is enabled as the current implementation conflicts.
+	 */
+#ifndef CONFIG_SPU_FS_64K_LS
+	set_huge_psize(MMU_PAGE_64K);
+#endif
+
+	for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
+		if (mmu_huge_psizes[psize]) {
+			huge_pgtable_cache(psize) = kmem_cache_create(
+						HUGEPTE_CACHE_NAME(psize),
+						HUGEPTE_TABLE_SIZE(psize),
+						HUGEPTE_TABLE_SIZE(psize),
+						0,
+						NULL);
+			if (!huge_pgtable_cache(psize))
+				panic("hugetlbpage_init(): could not create %s"\
+				      "\n", HUGEPTE_CACHE_NAME(psize));
+		}
+	}
 
 	return 0;
 }
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 1952b4d3fa7f..388ceda632f3 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -43,6 +43,7 @@
 #include <asm/btext.h>
 #include <asm/tlb.h>
 #include <asm/sections.h>
+#include <asm/system.h>
 
 #include "mmu_decl.h"
 
@@ -56,8 +57,8 @@
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
-unsigned long total_memory;
-unsigned long total_lowmem;
+phys_addr_t total_memory;
+phys_addr_t total_lowmem;
 
 phys_addr_t memstart_addr = (phys_addr_t)~0ull;
 EXPORT_SYMBOL(memstart_addr);
@@ -76,8 +77,6 @@ void MMU_init(void);
 /* XXX should be in current.h  -- paulus */
 extern struct task_struct *current_set[NR_CPUS];
 
-extern int init_bootmem_done;
-
 /*
  * this tells the system to map all of ram with the segregs
  * (i.e. page tables) instead of the bats.
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index 6aa65375abf5..4f7df85129d8 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -136,9 +136,14 @@ static int __init setup_kcore(void)
 module_init(setup_kcore);
 #endif
 
-static void zero_ctor(struct kmem_cache *cache, void *addr)
+static void pgd_ctor(void *addr)
 {
-	memset(addr, 0, kmem_cache_size(cache));
+	memset(addr, 0, PGD_TABLE_SIZE);
+}
+
+static void pmd_ctor(void *addr)
+{
+	memset(addr, 0, PMD_TABLE_SIZE);
 }
 
 static const unsigned int pgtable_cache_size[2] = {
@@ -153,29 +158,18 @@ static const char *pgtable_cache_name[ARRAY_SIZE(pgtable_cache_size)] = {
 };
 
 #ifdef CONFIG_HUGETLB_PAGE
-/* Hugepages need one extra cache, initialized in hugetlbpage.c.  We
- * can't put into the tables above, because HPAGE_SHIFT is not compile
- * time constant. */
-struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+1];
+/* Hugepages need an extra cache per hugepagesize, initialized in
+ * hugetlbpage.c.  We can't put into the tables above, because HPAGE_SHIFT
+ * is not compile time constant. */
+struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)+MMU_PAGE_COUNT];
 #else
 struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)];
 #endif
 
 void pgtable_cache_init(void)
 {
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(pgtable_cache_size); i++) {
-		int size = pgtable_cache_size[i];
-		const char *name = pgtable_cache_name[i];
-
-		pr_debug("Allocating page table cache %s (#%d) "
-			"for size: %08x...\n", name, i, size);
-		pgtable_cache[i] = kmem_cache_create(name,
-						     size, size,
-						     SLAB_PANIC,
-						     zero_ctor);
-	}
+	pgtable_cache[0] = kmem_cache_create(pgtable_cache_name[0], PGD_TABLE_SIZE, PGD_TABLE_SIZE, SLAB_PANIC, pgd_ctor);
+	pgtable_cache[1] = kmem_cache_create(pgtable_cache_name[1], PMD_TABLE_SIZE, PMD_TABLE_SIZE, SLAB_PANIC, pmd_ctor);
 }
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
@@ -185,7 +179,7 @@ void pgtable_cache_init(void)
  * do this by hand as the proffered address may not be correctly aligned.
  * Subtraction of non-aligned pointers produces undefined results.
  */
-unsigned long __meminit vmemmap_section_start(unsigned long page)
+static unsigned long __meminit vmemmap_section_start(unsigned long page)
 {
 	unsigned long offset = page - ((unsigned long)(vmemmap));
 
@@ -198,7 +192,7 @@ unsigned long __meminit vmemmap_section_start(unsigned long page)
  * which overlaps this vmemmap page is initialised then this page is
  * initialised already.
  */
-int __meminit vmemmap_populated(unsigned long start, int page_size)
+static int __meminit vmemmap_populated(unsigned long start, int page_size)
 {
 	unsigned long end = start + page_size;
 
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index 51f82d83bf14..1c93c255873b 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -44,6 +44,7 @@
 #include <asm/btext.h>
 #include <asm/tlb.h>
 #include <asm/sections.h>
+#include <asm/sparsemem.h>
 #include <asm/vdso.h>
 #include <asm/fixmap.h>
 
@@ -185,45 +186,6 @@ walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg,
 }
 EXPORT_SYMBOL_GPL(walk_memory_resource);
 
-void show_mem(void)
-{
-	unsigned long total = 0, reserved = 0;
-	unsigned long shared = 0, cached = 0;
-	unsigned long highmem = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-	unsigned long i;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		unsigned long flags;
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			if (!pfn_valid(pgdat->node_start_pfn + i))
-				continue;
-			page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageHighMem(page))
-				highmem++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk("%ld pages of RAM\n", total);
-#ifdef CONFIG_HIGHMEM
-	printk("%ld pages of HIGHMEM\n", highmem);
-#endif
-	printk("%ld reserved pages\n", reserved);
-	printk("%ld pages shared\n", shared);
-	printk("%ld pages swap cached\n", cached);
-}
-
 /*
  * Initialize the bootmem system and give it all the memory we
  * have available.  If we are using highmem, we only put the
@@ -329,7 +291,7 @@ static int __init mark_nonram_nosave(void)
 void __init paging_init(void)
 {
 	unsigned long total_ram = lmb_phys_mem_size();
-	unsigned long top_of_ram = lmb_end_of_DRAM();
+	phys_addr_t top_of_ram = lmb_end_of_DRAM();
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 
 #ifdef CONFIG_PPC32
@@ -348,10 +310,10 @@ void __init paging_init(void)
 	kmap_prot = PAGE_KERNEL;
 #endif /* CONFIG_HIGHMEM */
 
-	printk(KERN_DEBUG "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
-	       top_of_ram, total_ram);
+	printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%lx\n",
+	       (unsigned long long)top_of_ram, total_ram);
 	printk(KERN_DEBUG "Memory hole size: %ldMB\n",
-	       (top_of_ram - total_ram) >> 20);
+	       (long int)((top_of_ram - total_ram) >> 20));
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
 #ifdef CONFIG_HIGHMEM
 	max_zone_pfns[ZONE_DMA] = lowmem_end_addr >> PAGE_SHIFT;
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index 04802252a64f..fab3cfad4099 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -29,7 +29,7 @@ extern void hash_preload(struct mm_struct *mm, unsigned long ea,
 #ifdef CONFIG_PPC32
 extern void mapin_ram(void);
 extern int map_page(unsigned long va, phys_addr_t pa, int flags);
-extern void setbat(int index, unsigned long virt, unsigned long phys,
+extern void setbat(int index, unsigned long virt, phys_addr_t phys,
 		   unsigned int size, int flags);
 extern void settlbcam(int index, unsigned long virt, phys_addr_t phys,
 		      unsigned int size, int flags, unsigned int pid);
@@ -49,8 +49,8 @@ extern unsigned int num_tlbcam_entries;
 extern unsigned long ioremap_bot;
 extern unsigned long __max_low_memory;
 extern phys_addr_t __initial_memory_limit_addr;
-extern unsigned long total_memory;
-extern unsigned long total_lowmem;
+extern phys_addr_t total_memory;
+extern phys_addr_t total_lowmem;
 extern phys_addr_t memstart_addr;
 extern phys_addr_t lowmem_end_addr;
 
diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c
index dc704da363eb..d9a181351332 100644
--- a/arch/powerpc/mm/numa.c
+++ b/arch/powerpc/mm/numa.c
@@ -39,7 +39,6 @@ EXPORT_SYMBOL(numa_cpu_lookup_table);
 EXPORT_SYMBOL(numa_cpumask_lookup_table);
 EXPORT_SYMBOL(node_data);
 
-static bootmem_data_t __initdata plat_node_bdata[MAX_NUMNODES];
 static int min_common_depth;
 static int n_mem_addr_cells, n_mem_size_cells;
 
@@ -268,6 +267,144 @@ static unsigned long __devinit read_n_cells(int n, const unsigned int **buf)
 	return result;
 }
 
+struct of_drconf_cell {
+	u64	base_addr;
+	u32	drc_index;
+	u32	reserved;
+	u32	aa_index;
+	u32	flags;
+};
+
+#define DRCONF_MEM_ASSIGNED	0x00000008
+#define DRCONF_MEM_AI_INVALID	0x00000040
+#define DRCONF_MEM_RESERVED	0x00000080
+
+/*
+ * Read the next lmb list entry from the ibm,dynamic-memory property
+ * and return the information in the provided of_drconf_cell structure.
+ */
+static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp)
+{
+	const u32 *cp;
+
+	drmem->base_addr = read_n_cells(n_mem_addr_cells, cellp);
+
+	cp = *cellp;
+	drmem->drc_index = cp[0];
+	drmem->reserved = cp[1];
+	drmem->aa_index = cp[2];
+	drmem->flags = cp[3];
+
+	*cellp = cp + 4;
+}
+
+/*
+ * Retreive and validate the ibm,dynamic-memory property of the device tree.
+ *
+ * The layout of the ibm,dynamic-memory property is a number N of lmb
+ * list entries followed by N lmb list entries.  Each lmb list entry
+ * contains information as layed out in the of_drconf_cell struct above.
+ */
+static int of_get_drconf_memory(struct device_node *memory, const u32 **dm)
+{
+	const u32 *prop;
+	u32 len, entries;
+
+	prop = of_get_property(memory, "ibm,dynamic-memory", &len);
+	if (!prop || len < sizeof(unsigned int))
+		return 0;
+
+	entries = *prop++;
+
+	/* Now that we know the number of entries, revalidate the size
+	 * of the property read in to ensure we have everything
+	 */
+	if (len < (entries * (n_mem_addr_cells + 4) + 1) * sizeof(unsigned int))
+		return 0;
+
+	*dm = prop;
+	return entries;
+}
+
+/*
+ * Retreive and validate the ibm,lmb-size property for drconf memory
+ * from the device tree.
+ */
+static u64 of_get_lmb_size(struct device_node *memory)
+{
+	const u32 *prop;
+	u32 len;
+
+	prop = of_get_property(memory, "ibm,lmb-size", &len);
+	if (!prop || len < sizeof(unsigned int))
+		return 0;
+
+	return read_n_cells(n_mem_size_cells, &prop);
+}
+
+struct assoc_arrays {
+	u32	n_arrays;
+	u32	array_sz;
+	const u32 *arrays;
+};
+
+/*
+ * Retreive and validate the list of associativity arrays for drconf
+ * memory from the ibm,associativity-lookup-arrays property of the
+ * device tree..
+ *
+ * The layout of the ibm,associativity-lookup-arrays property is a number N
+ * indicating the number of associativity arrays, followed by a number M
+ * indicating the size of each associativity array, followed by a list
+ * of N associativity arrays.
+ */
+static int of_get_assoc_arrays(struct device_node *memory,
+			       struct assoc_arrays *aa)
+{
+	const u32 *prop;
+	u32 len;
+
+	prop = of_get_property(memory, "ibm,associativity-lookup-arrays", &len);
+	if (!prop || len < 2 * sizeof(unsigned int))
+		return -1;
+
+	aa->n_arrays = *prop++;
+	aa->array_sz = *prop++;
+
+	/* Now that we know the number of arrrays and size of each array,
+	 * revalidate the size of the property read in.
+	 */
+	if (len < (aa->n_arrays * aa->array_sz + 2) * sizeof(unsigned int))
+		return -1;
+
+	aa->arrays = prop;
+	return 0;
+}
+
+/*
+ * This is like of_node_to_nid_single() for memory represented in the
+ * ibm,dynamic-reconfiguration-memory node.
+ */
+static int of_drconf_to_nid_single(struct of_drconf_cell *drmem,
+				   struct assoc_arrays *aa)
+{
+	int default_nid = 0;
+	int nid = default_nid;
+	int index;
+
+	if (min_common_depth > 0 && min_common_depth <= aa->array_sz &&
+	    !(drmem->flags & DRCONF_MEM_AI_INVALID) &&
+	    drmem->aa_index < aa->n_arrays) {
+		index = drmem->aa_index * aa->array_sz + min_common_depth - 1;
+		nid = aa->arrays[index];
+
+		if (nid == 0xffff || nid >= MAX_NUMNODES)
+			nid = default_nid;
+	}
+
+	return nid;
+}
+
 /*
  * Figure out to which domain a cpu belongs and stick it there.
  * Return the id of the domain used.
@@ -355,57 +492,50 @@ static unsigned long __init numa_enforce_memory_limit(unsigned long start,
  */
 static void __init parse_drconf_memory(struct device_node *memory)
 {
-	const unsigned int *lm, *dm, *aa;
-	unsigned int ls, ld, la;
-	unsigned int n, aam, aalen;
-	unsigned long lmb_size, size, start;
-	int nid, default_nid = 0;
-	unsigned int ai, flags;
-
-	lm = of_get_property(memory, "ibm,lmb-size", &ls);
-	dm = of_get_property(memory, "ibm,dynamic-memory", &ld);
-	aa = of_get_property(memory, "ibm,associativity-lookup-arrays", &la);
-	if (!lm || !dm || !aa ||
-	    ls < sizeof(unsigned int) || ld < sizeof(unsigned int) ||
-	    la < 2 * sizeof(unsigned int))
+	const u32 *dm;
+	unsigned int n, rc;
+	unsigned long lmb_size, size;
+	int nid;
+	struct assoc_arrays aa;
+
+	n = of_get_drconf_memory(memory, &dm);
+	if (!n)
+		return;
+
+	lmb_size = of_get_lmb_size(memory);
+	if (!lmb_size)
 		return;
 
-	lmb_size = read_n_cells(n_mem_size_cells, &lm);
-	n = *dm++;		/* number of LMBs */
-	aam = *aa++;		/* number of associativity lists */
-	aalen = *aa++;		/* length of each associativity list */
-	if (ld < (n * (n_mem_addr_cells + 4) + 1) * sizeof(unsigned int) ||
-	    la < (aam * aalen + 2) * sizeof(unsigned int))
+	rc = of_get_assoc_arrays(memory, &aa);
+	if (rc)
 		return;
 
 	for (; n != 0; --n) {
-		start = read_n_cells(n_mem_addr_cells, &dm);
-		ai = dm[2];
-		flags = dm[3];
-		dm += 4;
-		/* 0x80 == reserved, 0x8 = assigned to us */
-		if ((flags & 0x80) || !(flags & 0x8))
+		struct of_drconf_cell drmem;
+
+		read_drconf_cell(&drmem, &dm);
+
+		/* skip this block if the reserved bit is set in flags (0x80)
+		   or if the block is not assigned to this partition (0x8) */
+		if ((drmem.flags & DRCONF_MEM_RESERVED)
+		    || !(drmem.flags & DRCONF_MEM_ASSIGNED))
 			continue;
-		nid = default_nid;
-		/* flags & 0x40 means associativity index is invalid */
-		if (min_common_depth > 0 && min_common_depth <= aalen &&
-		    (flags & 0x40) == 0 && ai < aam) {
-			/* this is like of_node_to_nid_single */
-			nid = aa[ai * aalen + min_common_depth - 1];
-			if (nid == 0xffff || nid >= MAX_NUMNODES)
-				nid = default_nid;
-		}
 
-		fake_numa_create_new_node(((start + lmb_size) >> PAGE_SHIFT),
-						&nid);
+		nid = of_drconf_to_nid_single(&drmem, &aa);
+
+		fake_numa_create_new_node(
+				((drmem.base_addr + lmb_size) >> PAGE_SHIFT),
+					   &nid);
+
 		node_set_online(nid);
 
-		size = numa_enforce_memory_limit(start, lmb_size);
+		size = numa_enforce_memory_limit(drmem.base_addr, lmb_size);
 		if (!size)
 			continue;
 
-		add_active_range(nid, start >> PAGE_SHIFT,
-				 (start >> PAGE_SHIFT) + (size >> PAGE_SHIFT));
+		add_active_range(nid, drmem.base_addr >> PAGE_SHIFT,
+				 (drmem.base_addr >> PAGE_SHIFT)
+				 + (size >> PAGE_SHIFT));
 	}
 }
 
@@ -685,7 +815,7 @@ void __init do_init_bootmem(void)
   		dbg("node %d\n", nid);
 		dbg("NODE_DATA() = %p\n", NODE_DATA(nid));
 
-		NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
+		NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 		NODE_DATA(nid)->node_start_pfn = start_pfn;
 		NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
 
@@ -770,6 +900,79 @@ early_param("numa", early_numa);
 
 #ifdef CONFIG_MEMORY_HOTPLUG
 /*
+ * Validate the node associated with the memory section we are
+ * trying to add.
+ */
+int valid_hot_add_scn(int *nid, unsigned long start, u32 lmb_size,
+		      unsigned long scn_addr)
+{
+	nodemask_t nodes;
+
+	if (*nid < 0 || !node_online(*nid))
+		*nid = any_online_node(NODE_MASK_ALL);
+
+	if ((scn_addr >= start) && (scn_addr < (start + lmb_size))) {
+		nodes_setall(nodes);
+		while (NODE_DATA(*nid)->node_spanned_pages == 0) {
+			node_clear(*nid, nodes);
+			*nid = any_online_node(nodes);
+		}
+
+		return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * Find the node associated with a hot added memory section represented
+ * by the ibm,dynamic-reconfiguration-memory node.
+ */
+static int hot_add_drconf_scn_to_nid(struct device_node *memory,
+				     unsigned long scn_addr)
+{
+	const u32 *dm;
+	unsigned int n, rc;
+	unsigned long lmb_size;
+	int default_nid = any_online_node(NODE_MASK_ALL);
+	int nid;
+	struct assoc_arrays aa;
+
+	n = of_get_drconf_memory(memory, &dm);
+	if (!n)
+		return default_nid;;
+
+	lmb_size = of_get_lmb_size(memory);
+	if (!lmb_size)
+		return default_nid;
+
+	rc = of_get_assoc_arrays(memory, &aa);
+	if (rc)
+		return default_nid;
+
+	for (; n != 0; --n) {
+		struct of_drconf_cell drmem;
+
+		read_drconf_cell(&drmem, &dm);
+
+		/* skip this block if it is reserved or not assigned to
+		 * this partition */
+		if ((drmem.flags & DRCONF_MEM_RESERVED)
+		    || !(drmem.flags & DRCONF_MEM_ASSIGNED))
+			continue;
+
+		nid = of_drconf_to_nid_single(&drmem, &aa);
+
+		if (valid_hot_add_scn(&nid, drmem.base_addr, lmb_size,
+				      scn_addr))
+			return nid;
+	}
+
+	BUG();	/* section address should be found above */
+	return 0;
+}
+
+/*
  * Find the node associated with a hot added memory section.  Section
  * corresponds to a SPARSEMEM section, not an LMB.  It is assumed that
  * sections are fully contained within a single LMB.
@@ -777,12 +980,17 @@ early_param("numa", early_numa);
 int hot_add_scn_to_nid(unsigned long scn_addr)
 {
 	struct device_node *memory = NULL;
-	nodemask_t nodes;
-	int default_nid = any_online_node(NODE_MASK_ALL);
 	int nid;
 
 	if (!numa_enabled || (min_common_depth < 0))
-		return default_nid;
+		return any_online_node(NODE_MASK_ALL);
+
+	memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
+	if (memory) {
+		nid = hot_add_drconf_scn_to_nid(memory, scn_addr);
+		of_node_put(memory);
+		return nid;
+	}
 
 	while ((memory = of_find_node_by_type(memory, "memory")) != NULL) {
 		unsigned long start, size;
@@ -801,13 +1009,9 @@ ha_new_range:
 		size = read_n_cells(n_mem_size_cells, &memcell_buf);
 		nid = of_node_to_nid_single(memory);
 
-		/* Domains not present at boot default to 0 */
-		if (nid < 0 || !node_online(nid))
-			nid = default_nid;
-
-		if ((scn_addr >= start) && (scn_addr < (start + size))) {
+		if (valid_hot_add_scn(&nid, start, size, scn_addr)) {
 			of_node_put(memory);
-			goto got_nid;
+			return nid;
 		}
 
 		if (--ranges)		/* process all ranges in cell */
@@ -815,14 +1019,5 @@ ha_new_range:
 	}
 	BUG();	/* section address should be found above */
 	return 0;
-
-	/* Temporary code to ensure that returned node is not empty */
-got_nid:
-	nodes_setall(nodes);
-	while (NODE_DATA(nid)->node_spanned_pages == 0) {
-		node_clear(nid, nodes);
-		nid = any_online_node(nodes);
-	}
-	return nid;
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index e0ff59f21135..2001abdb1912 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -53,9 +53,9 @@ extern void hash_page_sync(void);
 #endif
 
 #ifdef HAVE_BATS
-extern unsigned long v_mapped_by_bats(unsigned long va);
-extern unsigned long p_mapped_by_bats(unsigned long pa);
-void setbat(int index, unsigned long virt, unsigned long phys,
+extern phys_addr_t v_mapped_by_bats(unsigned long va);
+extern unsigned long p_mapped_by_bats(phys_addr_t pa);
+void setbat(int index, unsigned long virt, phys_addr_t phys,
 	    unsigned int size, int flags);
 
 #else /* !HAVE_BATS */
@@ -145,13 +145,20 @@ void pte_free(struct mm_struct *mm, pgtable_t ptepage)
 void __iomem *
 ioremap(phys_addr_t addr, unsigned long size)
 {
-	return __ioremap(addr, size, _PAGE_NO_CACHE);
+	return __ioremap(addr, size, _PAGE_NO_CACHE | _PAGE_GUARDED);
 }
 EXPORT_SYMBOL(ioremap);
 
 void __iomem *
 ioremap_flags(phys_addr_t addr, unsigned long size, unsigned long flags)
 {
+	/* writeable implies dirty for kernel addresses */
+	if (flags & _PAGE_RW)
+		flags |= _PAGE_DIRTY | _PAGE_HWWRITE;
+
+	/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
+	flags &= ~(_PAGE_USER | _PAGE_EXEC | _PAGE_HWEXEC);
+
 	return __ioremap(addr, size, flags);
 }
 EXPORT_SYMBOL(ioremap_flags);
@@ -163,6 +170,14 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
 	phys_addr_t p;
 	int err;
 
+	/* Make sure we have the base flags */
+	if ((flags & _PAGE_PRESENT) == 0)
+		flags |= _PAGE_KERNEL;
+
+	/* Non-cacheable page cannot be coherent */
+	if (flags & _PAGE_NO_CACHE)
+		flags &= ~_PAGE_COHERENT;
+
 	/*
 	 * Choose an address to map it to.
 	 * Once the vmalloc system is running, we use it.
@@ -219,11 +234,6 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
 		v = (ioremap_bot -= size);
 	}
 
-	if ((flags & _PAGE_PRESENT) == 0)
-		flags |= _PAGE_KERNEL;
-	if (flags & _PAGE_NO_CACHE)
-		flags |= _PAGE_GUARDED;
-
 	/*
 	 * Should check if it is a candidate for a BAT mapping
 	 */
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index 3ef0ad2f9ca0..365e61ae5dbc 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -107,9 +107,18 @@ void __iomem * __ioremap_at(phys_addr_t pa, void *ea, unsigned long size,
 {
 	unsigned long i;
 
+	/* Make sure we have the base flags */
 	if ((flags & _PAGE_PRESENT) == 0)
 		flags |= pgprot_val(PAGE_KERNEL);
 
+	/* Non-cacheable page cannot be coherent */
+	if (flags & _PAGE_NO_CACHE)
+		flags &= ~_PAGE_COHERENT;
+
+	/* We don't support the 4K PFN hack with ioremap */
+	if (flags & _PAGE_4K_PFN)
+		return NULL;
+
 	WARN_ON(pa & ~PAGE_MASK);
 	WARN_ON(((unsigned long)ea) & ~PAGE_MASK);
 	WARN_ON(size & ~PAGE_MASK);
@@ -190,6 +199,13 @@ void __iomem * ioremap(phys_addr_t addr, unsigned long size)
 void __iomem * ioremap_flags(phys_addr_t addr, unsigned long size,
 			     unsigned long flags)
 {
+	/* writeable implies dirty for kernel addresses */
+	if (flags & _PAGE_RW)
+		flags |= _PAGE_DIRTY;
+
+	/* we don't want to let _PAGE_USER and _PAGE_EXEC leak out */
+	flags &= ~(_PAGE_USER | _PAGE_EXEC);
+
 	if (ppc_md.ioremap)
 		return ppc_md.ioremap(addr, size, flags);
 	return __ioremap(addr, size, flags);
diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c
index cef9f156874b..6aa120813775 100644
--- a/arch/powerpc/mm/ppc_mmu_32.c
+++ b/arch/powerpc/mm/ppc_mmu_32.c
@@ -38,21 +38,18 @@ struct hash_pte *Hash, *Hash_end;
 unsigned long Hash_size, Hash_mask;
 unsigned long _SDR1;
 
-union ubat {			/* BAT register values to be loaded */
-	struct ppc_bat bat;
-	u32	word[2];
-} BATS[8][2];			/* 8 pairs of IBAT, DBAT */
+struct ppc_bat BATS[8][2];	/* 8 pairs of IBAT, DBAT */
 
 struct batrange {		/* stores address ranges mapped by BATs */
 	unsigned long start;
 	unsigned long limit;
-	unsigned long phys;
+	phys_addr_t phys;
 } bat_addrs[8];
 
 /*
  * Return PA for this VA if it is mapped by a BAT, or 0
  */
-unsigned long v_mapped_by_bats(unsigned long va)
+phys_addr_t v_mapped_by_bats(unsigned long va)
 {
 	int b;
 	for (b = 0; b < 4; ++b)
@@ -64,7 +61,7 @@ unsigned long v_mapped_by_bats(unsigned long va)
 /*
  * Return VA for a given PA or 0 if not mapped
  */
-unsigned long p_mapped_by_bats(unsigned long pa)
+unsigned long p_mapped_by_bats(phys_addr_t pa)
 {
 	int b;
 	for (b = 0; b < 4; ++b)
@@ -119,12 +116,12 @@ unsigned long __init mmu_mapin_ram(void)
  * The parameters are not checked; in particular size must be a power
  * of 2 between 128k and 256M.
  */
-void __init setbat(int index, unsigned long virt, unsigned long phys,
+void __init setbat(int index, unsigned long virt, phys_addr_t phys,
 		   unsigned int size, int flags)
 {
 	unsigned int bl;
 	int wimgxpp;
-	union ubat *bat = BATS[index];
+	struct ppc_bat *bat = BATS[index];
 
 	if (((flags & _PAGE_NO_CACHE) == 0) &&
 	    cpu_has_feature(CPU_FTR_NEED_COHERENT))
@@ -137,15 +134,15 @@ void __init setbat(int index, unsigned long virt, unsigned long phys,
 		wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE
 				   | _PAGE_COHERENT | _PAGE_GUARDED);
 		wimgxpp |= (flags & _PAGE_RW)? BPP_RW: BPP_RX;
-		bat[1].word[0] = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */
-		bat[1].word[1] = phys | wimgxpp;
+		bat[1].batu = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */
+		bat[1].batl = BAT_PHYS_ADDR(phys) | wimgxpp;
 #ifndef CONFIG_KGDB /* want user access for breakpoints */
 		if (flags & _PAGE_USER)
 #endif
-			bat[1].bat.batu.vp = 1;
+			bat[1].batu |= 1; 	/* Vp = 1 */
 		if (flags & _PAGE_GUARDED) {
 			/* G bit must be zero in IBATs */
-			bat[0].word[0] = bat[0].word[1] = 0;
+			bat[0].batu = bat[0].batl = 0;
 		} else {
 			/* make IBAT same as DBAT */
 			bat[0] = bat[1];
@@ -158,8 +155,8 @@ void __init setbat(int index, unsigned long virt, unsigned long phys,
 				   | _PAGE_COHERENT);
 		wimgxpp |= (flags & _PAGE_RW)?
 			((flags & _PAGE_USER)? PP_RWRW: PP_RWXX): PP_RXRX;
-		bat->word[0] = virt | wimgxpp | 4;	/* Ks=0, Ku=1 */
-		bat->word[1] = phys | bl | 0x40;	/* V=1 */
+		bat->batu = virt | wimgxpp | 4;	/* Ks=0, Ku=1 */
+		bat->batl = phys | bl | 0x40;	/* V=1 */
 	}
 
 	bat_addrs[index].start = virt;
@@ -239,8 +236,8 @@ void __init MMU_init_hw(void)
 
 	Hash_end = (struct hash_pte *) ((unsigned long)Hash + Hash_size);
 
-	printk("Total memory = %ldMB; using %ldkB for hash table (at %p)\n",
-	       total_memory >> 20, Hash_size >> 10, Hash);
+	printk("Total memory = %lldMB; using %ldkB for hash table (at %p)\n",
+	       (unsigned long long)(total_memory >> 20), Hash_size >> 10, Hash);
 
 
 	/*
diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index ad928edafb0a..db44e02e045b 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -215,10 +215,7 @@ static void slice_convert(struct mm_struct *mm, struct slice_mask mask, int psiz
 		  mm->context.high_slices_psize);
 
 	spin_unlock_irqrestore(&slice_convert_lock, flags);
-	mb();
 
-	/* XXX this is sub-optimal but will do for now */
-	on_each_cpu(slice_flush_segments, mm, 0, 1);
 #ifdef CONFIG_SPU_BASE
 	spu_flush_all_slbs(mm);
 #endif
@@ -384,17 +381,34 @@ static unsigned long slice_find_area(struct mm_struct *mm, unsigned long len,
 		return slice_find_area_bottomup(mm, len, mask, psize, use_cache);
 }
 
+#define or_mask(dst, src)	do {			\
+	(dst).low_slices |= (src).low_slices;		\
+	(dst).high_slices |= (src).high_slices;		\
+} while (0)
+
+#define andnot_mask(dst, src)	do {			\
+	(dst).low_slices &= ~(src).low_slices;		\
+	(dst).high_slices &= ~(src).high_slices;	\
+} while (0)
+
+#ifdef CONFIG_PPC_64K_PAGES
+#define MMU_PAGE_BASE	MMU_PAGE_64K
+#else
+#define MMU_PAGE_BASE	MMU_PAGE_4K
+#endif
+
 unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 				      unsigned long flags, unsigned int psize,
 				      int topdown, int use_cache)
 {
-	struct slice_mask mask;
+	struct slice_mask mask = {0, 0};
 	struct slice_mask good_mask;
 	struct slice_mask potential_mask = {0,0} /* silence stupid warning */;
-	int pmask_set = 0;
+	struct slice_mask compat_mask = {0, 0};
 	int fixed = (flags & MAP_FIXED);
 	int pshift = max_t(int, mmu_psize_defs[psize].shift, PAGE_SHIFT);
 	struct mm_struct *mm = current->mm;
+	unsigned long newaddr;
 
 	/* Sanity checks */
 	BUG_ON(mm->task_size == 0);
@@ -416,21 +430,48 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 	if (!fixed && addr) {
 		addr = _ALIGN_UP(addr, 1ul << pshift);
 		slice_dbg(" aligned addr=%lx\n", addr);
+		/* Ignore hint if it's too large or overlaps a VMA */
+		if (addr > mm->task_size - len ||
+		    !slice_area_is_free(mm, addr, len))
+			addr = 0;
 	}
 
-	/* First makeup a "good" mask of slices that have the right size
+	/* First make up a "good" mask of slices that have the right size
 	 * already
 	 */
 	good_mask = slice_mask_for_size(mm, psize);
 	slice_print_mask(" good_mask", good_mask);
 
-	/* First check hint if it's valid or if we have MAP_FIXED */
-	if ((addr != 0 || fixed) && (mm->task_size - len) >= addr) {
+	/*
+	 * Here "good" means slices that are already the right page size,
+	 * "compat" means slices that have a compatible page size (i.e.
+	 * 4k in a 64k pagesize kernel), and "free" means slices without
+	 * any VMAs.
+	 *
+	 * If MAP_FIXED:
+	 *	check if fits in good | compat => OK
+	 *	check if fits in good | compat | free => convert free
+	 *	else bad
+	 * If have hint:
+	 *	check if hint fits in good => OK
+	 *	check if hint fits in good | free => convert free
+	 * Otherwise:
+	 *	search in good, found => OK
+	 *	search in good | free, found => convert free
+	 *	search in good | compat | free, found => convert free.
+	 */
 
-		/* Don't bother with hint if it overlaps a VMA */
-		if (!fixed && !slice_area_is_free(mm, addr, len))
-			goto search;
+#ifdef CONFIG_PPC_64K_PAGES
+	/* If we support combo pages, we can allow 64k pages in 4k slices */
+	if (psize == MMU_PAGE_64K) {
+		compat_mask = slice_mask_for_size(mm, MMU_PAGE_4K);
+		if (fixed)
+			or_mask(good_mask, compat_mask);
+	}
+#endif
 
+	/* First check hint if it's valid or if we have MAP_FIXED */
+	if (addr != 0 || fixed) {
 		/* Build a mask for the requested range */
 		mask = slice_range_to_mask(addr, len);
 		slice_print_mask(" mask", mask);
@@ -442,54 +483,66 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 			slice_dbg(" fits good !\n");
 			return addr;
 		}
-
-		/* We don't fit in the good mask, check what other slices are
-		 * empty and thus can be converted
+	} else {
+		/* Now let's see if we can find something in the existing
+		 * slices for that size
 		 */
-		potential_mask = slice_mask_for_free(mm);
-		potential_mask.low_slices |= good_mask.low_slices;
-		potential_mask.high_slices |= good_mask.high_slices;
-		pmask_set = 1;
-		slice_print_mask(" potential", potential_mask);
-		if (slice_check_fit(mask, potential_mask)) {
-			slice_dbg(" fits potential !\n");
-			goto convert;
+		newaddr = slice_find_area(mm, len, good_mask, psize, topdown,
+					  use_cache);
+		if (newaddr != -ENOMEM) {
+			/* Found within the good mask, we don't have to setup,
+			 * we thus return directly
+			 */
+			slice_dbg(" found area at 0x%lx\n", newaddr);
+			return newaddr;
 		}
 	}
 
-	/* If we have MAP_FIXED and failed the above step, then error out */
+	/* We don't fit in the good mask, check what other slices are
+	 * empty and thus can be converted
+	 */
+	potential_mask = slice_mask_for_free(mm);
+	or_mask(potential_mask, good_mask);
+	slice_print_mask(" potential", potential_mask);
+
+	if ((addr != 0 || fixed) && slice_check_fit(mask, potential_mask)) {
+		slice_dbg(" fits potential !\n");
+		goto convert;
+	}
+
+	/* If we have MAP_FIXED and failed the above steps, then error out */
 	if (fixed)
 		return -EBUSY;
 
- search:
 	slice_dbg(" search...\n");
 
-	/* Now let's see if we can find something in the existing slices
-	 * for that size
+	/* If we had a hint that didn't work out, see if we can fit
+	 * anywhere in the good area.
 	 */
-	addr = slice_find_area(mm, len, good_mask, psize, topdown, use_cache);
-	if (addr != -ENOMEM) {
-		/* Found within the good mask, we don't have to setup,
-		 * we thus return directly
-		 */
-		slice_dbg(" found area at 0x%lx\n", addr);
-		return addr;
-	}
-
-	/* Won't fit, check what can be converted */
-	if (!pmask_set) {
-		potential_mask = slice_mask_for_free(mm);
-		potential_mask.low_slices |= good_mask.low_slices;
-		potential_mask.high_slices |= good_mask.high_slices;
-		pmask_set = 1;
-		slice_print_mask(" potential", potential_mask);
+	if (addr) {
+		addr = slice_find_area(mm, len, good_mask, psize, topdown,
+				       use_cache);
+		if (addr != -ENOMEM) {
+			slice_dbg(" found area at 0x%lx\n", addr);
+			return addr;
+		}
 	}
 
 	/* Now let's see if we can find something in the existing slices
-	 * for that size
+	 * for that size plus free slices
 	 */
 	addr = slice_find_area(mm, len, potential_mask, psize, topdown,
 			       use_cache);
+
+#ifdef CONFIG_PPC_64K_PAGES
+	if (addr == -ENOMEM && psize == MMU_PAGE_64K) {
+		/* retry the search with 4k-page slices included */
+		or_mask(potential_mask, compat_mask);
+		addr = slice_find_area(mm, len, potential_mask, psize,
+				       topdown, use_cache);
+	}
+#endif
+
 	if (addr == -ENOMEM)
 		return -ENOMEM;
 
@@ -498,7 +551,13 @@ unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
 	slice_print_mask(" mask", mask);
 
  convert:
-	slice_convert(mm, mask, psize);
+	andnot_mask(mask, good_mask);
+	andnot_mask(mask, compat_mask);
+	if (mask.low_slices || mask.high_slices) {
+		slice_convert(mm, mask, psize);
+		if (psize > MMU_PAGE_BASE)
+			on_each_cpu(slice_flush_segments, mm, 1);
+	}
 	return addr;
 
 }
@@ -598,6 +657,36 @@ void slice_set_user_psize(struct mm_struct *mm, unsigned int psize)
 	spin_unlock_irqrestore(&slice_convert_lock, flags);
 }
 
+void slice_set_psize(struct mm_struct *mm, unsigned long address,
+		     unsigned int psize)
+{
+	unsigned long i, flags;
+	u64 *p;
+
+	spin_lock_irqsave(&slice_convert_lock, flags);
+	if (address < SLICE_LOW_TOP) {
+		i = GET_LOW_SLICE_INDEX(address);
+		p = &mm->context.low_slices_psize;
+	} else {
+		i = GET_HIGH_SLICE_INDEX(address);
+		p = &mm->context.high_slices_psize;
+	}
+	*p = (*p & ~(0xful << (i * 4))) | ((unsigned long) psize << (i * 4));
+	spin_unlock_irqrestore(&slice_convert_lock, flags);
+
+#ifdef CONFIG_SPU_BASE
+	spu_flush_all_slbs(mm);
+#endif
+}
+
+void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
+			   unsigned long len, unsigned int psize)
+{
+	struct slice_mask mask = slice_range_to_mask(start, len);
+
+	slice_convert(mm, mask, psize);
+}
+
 /*
  * is_hugepage_only_range() is used by generic code to verify wether
  * a normal mmap mapping (non hugetlbfs) is valid on a given area.
diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c
index efbbd13d93e5..60e6032a8088 100644
--- a/arch/powerpc/mm/stab.c
+++ b/arch/powerpc/mm/stab.c
@@ -30,8 +30,8 @@ struct stab_entry {
 };
 
 #define NR_STAB_CACHE_ENTRIES 8
-DEFINE_PER_CPU(long, stab_cache_ptr);
-DEFINE_PER_CPU(long, stab_cache[NR_STAB_CACHE_ENTRIES]);
+static DEFINE_PER_CPU(long, stab_cache_ptr);
+static DEFINE_PER_CPU(long, stab_cache[NR_STAB_CACHE_ENTRIES]);
 
 /*
  * Create a segment table entry for the given esid/vsid pair.
diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c
index e2d867ce1c7e..be7dd422c0fa 100644
--- a/arch/powerpc/mm/tlb_64.c
+++ b/arch/powerpc/mm/tlb_64.c
@@ -34,11 +34,11 @@
 DEFINE_PER_CPU(struct ppc64_tlb_batch, ppc64_tlb_batch);
 
 /* This is declared as we are using the more or less generic
- * include/asm-powerpc/tlb.h file -- tgall
+ * arch/powerpc/include/asm/tlb.h file -- tgall
  */
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
-unsigned long pte_freelist_forced_free;
+static DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
+static unsigned long pte_freelist_forced_free;
 
 struct pte_freelist_batch
 {
@@ -47,9 +47,6 @@ struct pte_freelist_batch
 	pgtable_free_t	tables[0];
 };
 
-DEFINE_PER_CPU(struct pte_freelist_batch *, pte_freelist_cur);
-unsigned long pte_freelist_forced_free;
-
 #define PTE_FREELIST_SIZE \
 	((PAGE_SIZE - sizeof(struct pte_freelist_batch)) \
 	  / sizeof(pgtable_free_t))
@@ -66,7 +63,7 @@ static void pgtable_free_now(pgtable_free_t pgf)
 {
 	pte_freelist_forced_free++;
 
-	smp_call_function(pte_free_smp_sync, NULL, 0, 1);
+	smp_call_function(pte_free_smp_sync, NULL, 1);
 
 	pgtable_free(pgf);
 }
@@ -150,7 +147,7 @@ void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 	 */
 	if (huge) {
 #ifdef CONFIG_HUGETLB_PAGE
-		psize = mmu_huge_psize;
+		psize = get_slice_psize(mm, addr);;
 #else
 		BUG();
 		psize = pte_pagesize_index(mm, addr, pte); /* shutup gcc */
diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c
index 4908dc98f9ca..17807acb05d9 100644
--- a/arch/powerpc/oprofile/common.c
+++ b/arch/powerpc/oprofile/common.c
@@ -65,7 +65,7 @@ static int op_powerpc_setup(void)
 
 	/* Configure the registers on all cpus.	 If an error occurs on one
 	 * of the cpus, op_per_cpu_rc will be set to the error */
-	on_each_cpu(op_powerpc_cpu_setup, NULL, 0, 1);
+	on_each_cpu(op_powerpc_cpu_setup, NULL, 1);
 
 out:	if (op_per_cpu_rc) {
 		/* error on setup release the performance counter hardware */
@@ -100,7 +100,7 @@ static int op_powerpc_start(void)
 	if (model->global_start)
 		return model->global_start(ctr);
 	if (model->start) {
-		on_each_cpu(op_powerpc_cpu_start, NULL, 0, 1);
+		on_each_cpu(op_powerpc_cpu_start, NULL, 1);
 		return op_per_cpu_rc;
 	}
 	return -EIO; /* No start function is defined for this
@@ -115,7 +115,7 @@ static inline void op_powerpc_cpu_stop(void *dummy)
 static void op_powerpc_stop(void)
 {
 	if (model->stop)
-		on_each_cpu(op_powerpc_cpu_stop, NULL, 0, 1);
+		on_each_cpu(op_powerpc_cpu_stop, NULL, 1);
         if (model->global_stop)
                 model->global_stop();
 }
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 6abe91357eee..249ba01c6674 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -17,6 +17,15 @@ config EBONY
 	help
 	  This option enables support for the IBM PPC440GP evaluation board.
 
+config SAM440EP
+        bool "Sam440ep"
+	depends on 44x
+        default n
+        select 440EP
+        select PCI
+        help
+          This option enables support for the ACube Sam440ep board.
+
 config SEQUOIA
 	bool "Sequoia"
 	depends on 44x
@@ -102,6 +111,22 @@ config YOSEMITE
 #	help
 #	  This option enables support for the IBM PPC440GX evaluation board.
 
+config XILINX_VIRTEX440_GENERIC_BOARD
+	bool "Generic Xilinx Virtex 440 board"
+	depends on 44x
+	default n
+	select XILINX_VIRTEX_5_FXT
+	help
+	  This option enables generic support for Xilinx Virtex based boards
+	  that use a 440 based processor in the Virtex 5 FXT FPGA architecture.
+
+	  The generic virtex board support matches any device tree which
+	  specifies 'xlnx,virtex440' in its compatible field.  This includes
+	  the Xilinx ML5xx reference designs using the powerpc core.
+
+	  Most Virtex 5 designs should use this unless it needs to do some
+	  special configuration at board probe time.
+
 # 44x specific CPU modules, selected based on the board above.
 config 440EP
 	bool
@@ -152,3 +177,13 @@ config 460EX
 # 44x errata/workaround config symbols, selected by the CPU models above
 config IBM440EP_ERR42
 	bool
+
+# Xilinx specific config options.
+config XILINX_VIRTEX
+	bool
+
+# Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above
+config XILINX_VIRTEX_5_FXT
+	bool
+	select XILINX_VIRTEX
+
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 774165f9acdd..8d0b1a192d62 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -3,9 +3,11 @@ obj-$(CONFIG_EBONY)	+= ebony.o
 obj-$(CONFIG_TAISHAN)	+= taishan.o
 obj-$(CONFIG_BAMBOO)	+= bamboo.o
 obj-$(CONFIG_YOSEMITE)	+= bamboo.o
+obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
 obj-$(CONFIG_SEQUOIA)	+= sequoia.o
 obj-$(CONFIG_KATMAI)	+= katmai.o
 obj-$(CONFIG_RAINIER)	+= rainier.o
 obj-$(CONFIG_WARP)	+= warp.o
 obj-$(CONFIG_WARP)	+= warp-nand.o
 obj-$(CONFIG_CANYONLANDS) += canyonlands.o
+obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
diff --git a/arch/powerpc/platforms/44x/sam440ep.c b/arch/powerpc/platforms/44x/sam440ep.c
new file mode 100644
index 000000000000..47f10e647735
--- /dev/null
+++ b/arch/powerpc/platforms/44x/sam440ep.c
@@ -0,0 +1,79 @@
+/*
+ * Sam440ep board specific routines based off bamboo.c code
+ * original copyrights below
+ *
+ * Wade Farnsworth <wfarnsworth@mvista.com>
+ * Copyright 2004 MontaVista Software Inc.
+ *
+ * Rewritten and ported to the merged powerpc tree:
+ * Josh Boyer <jwboyer@linux.vnet.ibm.com>
+ * Copyright 2007 IBM Corporation
+ *
+ * Modified from bamboo.c for sam440ep:
+ * Copyright 2008 Giuseppe Coviello <gicoviello@gmail.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/time.h>
+#include <asm/uic.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc4xx.h>
+#include <linux/i2c.h>
+
+static __initdata struct of_device_id sam440ep_of_bus[] = {
+	{ .compatible = "ibm,plb4", },
+	{ .compatible = "ibm,opb", },
+	{ .compatible = "ibm,ebc", },
+	{},
+};
+
+static int __init sam440ep_device_probe(void)
+{
+	of_platform_bus_probe(NULL, sam440ep_of_bus, NULL);
+
+	return 0;
+}
+machine_device_initcall(sam440ep, sam440ep_device_probe);
+
+static int __init sam440ep_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "acube,sam440ep"))
+		return 0;
+
+	ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
+
+	return 1;
+}
+
+define_machine(sam440ep) {
+	.name 			= "Sam440ep",
+	.probe 			= sam440ep_probe,
+	.progress 		= udbg_progress,
+	.init_IRQ 		= uic_init_tree,
+	.get_irq 		= uic_get_irq,
+	.restart		= ppc4xx_reset_system,
+	.calibrate_decr 	= generic_calibrate_decr,
+};
+
+static struct i2c_board_info sam440ep_rtc_info = {
+	.type = "m41st85",
+	.addr = 0x68,
+	.irq = -1,
+};
+
+static int sam440ep_setup_rtc(void)
+{
+	return i2c_register_board_info(0, &sam440ep_rtc_info, 1);
+}
+machine_device_initcall(sam440ep, sam440ep_setup_rtc);
diff --git a/arch/powerpc/platforms/44x/virtex.c b/arch/powerpc/platforms/44x/virtex.c
new file mode 100644
index 000000000000..68637faf70ae
--- /dev/null
+++ b/arch/powerpc/platforms/44x/virtex.c
@@ -0,0 +1,60 @@
+/*
+ * Xilinx Virtex 5FXT based board support, derived from
+ * the Xilinx Virtex (IIpro & 4FX) based board support
+ *
+ * Copyright 2007 Secret Lab Technologies Ltd.
+ * Copyright 2008 Xilinx, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/xilinx_intc.h>
+#include <asm/reg.h>
+#include <asm/ppc4xx.h>
+#include "44x.h"
+
+static struct of_device_id xilinx_of_bus_ids[] __initdata = {
+	{ .compatible = "simple-bus", },
+	{ .compatible = "xlnx,plb-v46-1.00.a", },
+	{ .compatible = "xlnx,plb-v46-1.02.a", },
+	{ .compatible = "xlnx,plb-v34-1.01.a", },
+	{ .compatible = "xlnx,plb-v34-1.02.a", },
+	{ .compatible = "xlnx,opb-v20-1.10.c", },
+	{ .compatible = "xlnx,dcr-v29-1.00.a", },
+	{ .compatible = "xlnx,compound", },
+	{}
+};
+
+static int __init virtex_device_probe(void)
+{
+	of_platform_bus_probe(NULL, xilinx_of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(virtex, virtex_device_probe);
+
+static int __init virtex_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "xlnx,virtex440"))
+		return 0;
+
+	return 1;
+}
+
+define_machine(virtex) {
+	.name			= "Xilinx Virtex440",
+	.probe			= virtex_probe,
+	.init_IRQ		= xilinx_intc_init_tree,
+	.get_irq		= xilinx_intc_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+	.restart		= ppc4xx_reset_system,
+};
diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c
index 9150318cfc56..e55746b824b4 100644
--- a/arch/powerpc/platforms/44x/warp-nand.c
+++ b/arch/powerpc/platforms/44x/warp-nand.c
@@ -11,8 +11,10 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/ndfc.h>
+#include <linux/of.h>
 #include <asm/machdep.h>
 
+
 #ifdef CONFIG_MTD_NAND_NDFC
 
 #define CS_NAND_0	1	/* use chip select 1 for NAND device 0 */
@@ -35,13 +37,23 @@ static struct mtd_partition nand_parts[] = {
 	{
 		.name   = "root",
 		.offset = 0x0200000,
-		.size   = 0x3400000
+		.size   = 0x3E00000
+	},
+	{
+		.name   = "persistent",
+		.offset = 0x4000000,
+		.size   = 0x4000000
 	},
 	{
-		.name   = "user",
-		.offset = 0x3600000,
-		.size   = 0x0A00000
+		.name   = "persistent1",
+		.offset = 0x8000000,
+		.size   = 0x4000000
 	},
+	{
+		.name   = "persistent2",
+		.offset = 0xC000000,
+		.size   = 0x4000000
+	}
 };
 
 struct ndfc_controller_settings warp_ndfc_settings = {
@@ -67,27 +79,22 @@ static struct platform_device warp_ndfc_device = {
 	.resource = &warp_ndfc,
 };
 
-static struct nand_ecclayout nand_oob_16 = {
-	.eccbytes = 3,
-	.eccpos = { 0, 1, 2, 3, 6, 7 },
-	.oobfree = { {.offset = 8, .length = 16} }
-};
-
+/* Do NOT set the ecclayout: let it default so it is correct for both
+ * 64M and 256M flash chips.
+ */
 static struct platform_nand_chip warp_nand_chip0 = {
 	.nr_chips = 1,
 	.chip_offset = CS_NAND_0,
 	.nr_partitions = ARRAY_SIZE(nand_parts),
 	.partitions = nand_parts,
-	.chip_delay = 50,
-	.ecclayout = &nand_oob_16,
+	.chip_delay = 20,
 	.priv = &warp_chip0_settings,
 };
 
 static struct platform_device warp_nand_device = {
 	.name = "ndfc-chip",
 	.id = 0,
-	.num_resources = 1,
-	.resource = &warp_ndfc,
+	.num_resources = 0,
 	.dev = {
 		.platform_data = &warp_nand_chip0,
 		.parent = &warp_ndfc_device.dev,
@@ -96,6 +103,28 @@ static struct platform_device warp_nand_device = {
 
 static int warp_setup_nand_flash(void)
 {
+	struct device_node *np;
+
+	/* Try to detect a rev A based on NOR size. */
+	np = of_find_compatible_node(NULL, NULL, "cfi-flash");
+	if (np) {
+		struct property *pp;
+
+		pp = of_find_property(np, "reg", NULL);
+		if (pp && (pp->length == 12)) {
+			u32 *v = pp->value;
+			if (v[2] == 0x4000000) {
+				/* Rev A = 64M NAND */
+				warp_nand_chip0.nr_partitions = 3;
+
+				nand_parts[1].size   = 0x3000000;
+				nand_parts[2].offset = 0x3200000;
+				nand_parts[2].size   = 0x0e00000;
+			}
+		}
+		of_node_put(np);
+	}
+
 	platform_device_register(&warp_ndfc_device);
 	platform_device_register(&warp_nand_device);
 
diff --git a/arch/powerpc/platforms/44x/warp.c b/arch/powerpc/platforms/44x/warp.c
index 39cf6150a72b..9565995cba7f 100644
--- a/arch/powerpc/platforms/44x/warp.c
+++ b/arch/powerpc/platforms/44x/warp.c
@@ -12,6 +12,9 @@
 #include <linux/init.h>
 #include <linux/of_platform.h>
 #include <linux/kthread.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
@@ -27,6 +30,18 @@ static __initdata struct of_device_id warp_of_bus[] = {
 	{},
 };
 
+static __initdata struct i2c_board_info warp_i2c_info[] = {
+	{ I2C_BOARD_INFO("ad7414", 0x4a) }
+};
+
+static int __init warp_arch_init(void)
+{
+	/* This should go away once support is moved to the dts. */
+	i2c_register_board_info(0, warp_i2c_info, ARRAY_SIZE(warp_i2c_info));
+	return 0;
+}
+machine_arch_initcall(warp, warp_arch_init);
+
 static int __init warp_device_probe(void)
 {
 	of_platform_bus_probe(NULL, warp_of_bus, NULL);
@@ -52,61 +67,232 @@ define_machine(warp) {
 };
 
 
-#define LED_GREEN (0x80000000 >> 0)
-#define LED_RED   (0x80000000 >> 1)
+/* I am not sure this is the best place for this... */
+static int __init warp_post_info(void)
+{
+	struct device_node *np;
+	void __iomem *fpga;
+	u32 post1, post2;
+
+	/* Sighhhh... POST information is in the sd area. */
+	np = of_find_compatible_node(NULL, NULL, "pika,fpga-sd");
+	if (np == NULL)
+		return -ENOENT;
+
+	fpga = of_iomap(np, 0);
+	of_node_put(np);
+	if (fpga == NULL)
+		return -ENOENT;
+
+	post1 = in_be32(fpga + 0x40);
+	post2 = in_be32(fpga + 0x44);
+
+	iounmap(fpga);
+
+	if (post1 || post2)
+		printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
+	else
+		printk(KERN_INFO "Warp POST OK\n");
+
+	return 0;
+}
+machine_late_initcall(warp, warp_post_info);
+
+
+#ifdef CONFIG_SENSORS_AD7414
+
+static LIST_HEAD(dtm_shutdown_list);
+static void __iomem *dtm_fpga;
+static void __iomem *gpio_base;
+
+
+struct dtm_shutdown {
+	struct list_head list;
+	void (*func)(void *arg);
+	void *arg;
+};
 
 
-/* This is for the power LEDs 1 = on, 0 = off, -1 = leave alone */
-void warp_set_power_leds(int green, int red)
+int pika_dtm_register_shutdown(void (*func)(void *arg), void *arg)
 {
-	static void __iomem *gpio_base = NULL;
-	unsigned leds;
-
-	if (gpio_base == NULL) {
-		struct device_node *np;
-
-		/* Power LEDS are on the second GPIO controller */
-		np = of_find_compatible_node(NULL, NULL, "ibm,gpio-440EP");
-		if (np)
-			np = of_find_compatible_node(np, NULL, "ibm,gpio-440EP");
-		if (np == NULL) {
-			printk(KERN_ERR __FILE__ ": Unable to find gpio\n");
-			return;
+	struct dtm_shutdown *shutdown;
+
+	shutdown = kmalloc(sizeof(struct dtm_shutdown), GFP_KERNEL);
+	if (shutdown == NULL)
+		return -ENOMEM;
+
+	shutdown->func = func;
+	shutdown->arg = arg;
+
+	list_add(&shutdown->list, &dtm_shutdown_list);
+
+	return 0;
+}
+
+int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
+{
+	struct dtm_shutdown *shutdown;
+
+	list_for_each_entry(shutdown, &dtm_shutdown_list, list)
+		if (shutdown->func == func && shutdown->arg == arg) {
+			list_del(&shutdown->list);
+			kfree(shutdown);
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+static irqreturn_t temp_isr(int irq, void *context)
+{
+	struct dtm_shutdown *shutdown;
+
+	local_irq_disable();
+
+	/* Run through the shutdown list. */
+	list_for_each_entry(shutdown, &dtm_shutdown_list, list)
+		shutdown->func(shutdown->arg);
+
+	printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n");
+
+	while (1) {
+		if (dtm_fpga) {
+			unsigned reset = in_be32(dtm_fpga + 0x14);
+			out_be32(dtm_fpga + 0x14, reset);
 		}
 
-		gpio_base = of_iomap(np, 0);
-		of_node_put(np);
-		if (gpio_base == NULL) {
-			printk(KERN_ERR __FILE__ ": Unable to map gpio");
-			return;
+		if (gpio_base) {
+			unsigned leds = in_be32(gpio_base);
+
+			/* green off, red toggle */
+			leds &= ~0x80000000;
+			leds ^=  0x40000000;
+
+			out_be32(gpio_base, leds);
 		}
+
+		mdelay(500);
+	}
+}
+
+static int pika_setup_leds(void)
+{
+	struct device_node *np;
+	const u32 *gpios;
+	int len;
+
+	np = of_find_compatible_node(NULL, NULL, "linux,gpio-led");
+	if (!np) {
+		printk(KERN_ERR __FILE__ ": Unable to find gpio-led\n");
+		return -ENOENT;
 	}
 
-	leds = in_be32(gpio_base);
+	gpios = of_get_property(np, "gpios", &len);
+	of_node_put(np);
+	if (!gpios || len < 4) {
+		printk(KERN_ERR __FILE__
+		       ": Unable to get gpios property (%d)\n", len);
+		return -ENOENT;
+	}
 
-	switch (green) {
-	case 0: leds &= ~LED_GREEN; break;
-	case 1: leds |=  LED_GREEN; break;
+	np = of_find_node_by_phandle(gpios[0]);
+	if (!np) {
+		printk(KERN_ERR __FILE__ ": Unable to find gpio\n");
+		return -ENOENT;
 	}
-	switch (red) {
-	case 0: leds &= ~LED_RED; break;
-	case 1: leds |=  LED_RED; break;
+
+	gpio_base = of_iomap(np, 0);
+	of_node_put(np);
+	if (!gpio_base) {
+		printk(KERN_ERR __FILE__ ": Unable to map gpio");
+		return -ENOMEM;
 	}
 
-	out_be32(gpio_base, leds);
+	return 0;
 }
-EXPORT_SYMBOL(warp_set_power_leds);
 
+static void pika_setup_critical_temp(struct i2c_client *client)
+{
+	struct device_node *np;
+	int irq, rc;
+
+	/* Do this before enabling critical temp interrupt since we
+	 * may immediately interrupt.
+	 */
+	pika_setup_leds();
+
+	/* These registers are in 1 degree increments. */
+	i2c_smbus_write_byte_data(client, 2, 65); /* Thigh */
+	i2c_smbus_write_byte_data(client, 3, 55); /* Tlow */
+
+	np = of_find_compatible_node(NULL, NULL, "adi,ad7414");
+	if (np == NULL) {
+		printk(KERN_ERR __FILE__ ": Unable to find ad7414\n");
+		return;
+	}
+
+	irq = irq_of_parse_and_map(np, 0);
+	of_node_put(np);
+	if (irq  == NO_IRQ) {
+		printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
+		return;
+	}
+
+	rc = request_irq(irq, temp_isr, 0, "ad7414", NULL);
+	if (rc) {
+		printk(KERN_ERR __FILE__
+		       ": Unable to request ad7414 irq %d = %d\n", irq, rc);
+		return;
+	}
+}
+
+static inline void pika_dtm_check_fan(void __iomem *fpga)
+{
+	static int fan_state;
+	u32 fan = in_be32(fpga + 0x34) & (1 << 14);
+
+	if (fan_state != fan) {
+		fan_state = fan;
+		if (fan)
+			printk(KERN_WARNING "Fan rotation error detected."
+				   " Please check hardware.\n");
+	}
+}
 
-#ifdef CONFIG_SENSORS_AD7414
 static int pika_dtm_thread(void __iomem *fpga)
 {
-	extern int ad7414_get_temp(int index);
+	struct i2c_adapter *adap;
+	struct i2c_client *client;
+
+	/* We loop in case either driver was compiled as a module and
+	 * has not been insmoded yet.
+	 */
+	while (!(adap = i2c_get_adapter(0))) {
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule_timeout(HZ);
+	}
+
+	while (1) {
+		list_for_each_entry(client, &adap->clients, list)
+			if (client->addr == 0x4a)
+				goto found_it;
+
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule_timeout(HZ);
+	}
+
+found_it:
+	i2c_put_adapter(adap);
+
+	pika_setup_critical_temp(client);
+
+	printk(KERN_INFO "PIKA DTM thread running.\n");
 
 	while (!kthread_should_stop()) {
-		int temp = ad7414_get_temp(0);
+		u16 temp = swab16(i2c_smbus_read_word_data(client, 0));
+		out_be32(fpga + 0x20, temp);
 
-		out_be32(fpga, temp);
+		pika_dtm_check_fan(fpga);
 
 		set_current_state(TASK_INTERRUPTIBLE);
 		schedule_timeout(HZ);
@@ -115,37 +301,44 @@ static int pika_dtm_thread(void __iomem *fpga)
 	return 0;
 }
 
+
 static int __init pika_dtm_start(void)
 {
 	struct task_struct *dtm_thread;
 	struct device_node *np;
-	struct resource res;
-	void __iomem *fpga;
 
 	np = of_find_compatible_node(NULL, NULL, "pika,fpga");
 	if (np == NULL)
 		return -ENOENT;
 
-	/* We do not call of_iomap here since it would map in the entire
-	 * fpga space, which is over 8k.
-	 */
-	if (of_address_to_resource(np, 0, &res)) {
-		of_node_put(np);
-		return -ENOENT;
-	}
+	dtm_fpga = of_iomap(np, 0);
 	of_node_put(np);
-
-	fpga = ioremap(res.start, 0x24);
-	if (fpga == NULL)
+	if (dtm_fpga == NULL)
 		return -ENOENT;
 
-	dtm_thread = kthread_run(pika_dtm_thread, fpga + 0x20, "pika-dtm");
+	dtm_thread = kthread_run(pika_dtm_thread, dtm_fpga, "pika-dtm");
 	if (IS_ERR(dtm_thread)) {
-		iounmap(fpga);
+		iounmap(dtm_fpga);
 		return PTR_ERR(dtm_thread);
 	}
 
 	return 0;
 }
-device_initcall(pika_dtm_start);
+machine_late_initcall(warp, pika_dtm_start);
+
+#else /* !CONFIG_SENSORS_AD7414 */
+
+int pika_dtm_register_shutdown(void (*func)(void *arg), void *arg)
+{
+	return 0;
+}
+
+int pika_dtm_unregister_shutdown(void (*func)(void *arg), void *arg)
+{
+	return 0;
+}
+
 #endif
+
+EXPORT_SYMBOL(pika_dtm_register_shutdown);
+EXPORT_SYMBOL(pika_dtm_unregister_shutdown);
diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig
index 4c0da0c079e9..c62f893ede19 100644
--- a/arch/powerpc/platforms/512x/Kconfig
+++ b/arch/powerpc/platforms/512x/Kconfig
@@ -2,18 +2,29 @@ config PPC_MPC512x
 	bool
 	select FSL_SOC
 	select IPIC
-	default n
+	select PPC_CLOCK
 
 config PPC_MPC5121
 	bool
 	select PPC_MPC512x
-	default n
 
 config MPC5121_ADS
 	bool "Freescale MPC5121E ADS"
 	depends on PPC_MULTIPLATFORM && PPC32
 	select DEFAULT_UIMAGE
 	select PPC_MPC5121
+	select MPC5121_ADS_CPLD
 	help
 	  This option enables support for the MPC5121E ADS board.
-	default n
+
+config MPC5121_GENERIC
+	bool "Generic support for simple MPC5121 based boards"
+	depends on PPC_MULTIPLATFORM && PPC32
+	select DEFAULT_UIMAGE
+	select PPC_MPC5121
+	help
+	  This option enables support for simple MPC5121 based boards
+	  which do not need custom platform specific setup.
+
+	  Compatible boards include:  Protonic LVT base boards (ZANMCU
+	  and VICVT2).
diff --git a/arch/powerpc/platforms/512x/Makefile b/arch/powerpc/platforms/512x/Makefile
index 232c89f2039a..90be2f5717e6 100644
--- a/arch/powerpc/platforms/512x/Makefile
+++ b/arch/powerpc/platforms/512x/Makefile
@@ -1,4 +1,6 @@
 #
 # Makefile for the Freescale PowerPC 512x linux kernel.
 #
-obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o
+obj-y				+= clock.o mpc512x_shared.o
+obj-$(CONFIG_MPC5121_ADS)	+= mpc5121_ads.o mpc5121_ads_cpld.o
+obj-$(CONFIG_MPC5121_GENERIC)	+= mpc5121_generic.o
diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c
new file mode 100644
index 000000000000..f416014ee727
--- /dev/null
+++ b/arch/powerpc/platforms/512x/clock.c
@@ -0,0 +1,729 @@
+/*
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby <jrigby@freescale.com>
+ *
+ * Implements the clk api defined in include/linux/clk.h
+ *
+ *    Original based on linux/arch/arm/mach-integrator/clock.c
+ *
+ *    Copyright (C) 2004 ARM Limited.
+ *    Written by Deep Blue Solutions Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <linux/of_platform.h>
+#include <asm/mpc512x.h>
+#include <asm/clk_interface.h>
+
+#undef CLK_DEBUG
+
+static int clocks_initialized;
+
+#define CLK_HAS_RATE	0x1	/* has rate in MHz */
+#define CLK_HAS_CTRL	0x2	/* has control reg and bit */
+
+struct clk {
+	struct list_head node;
+	char name[32];
+	int flags;
+	struct device *dev;
+	unsigned long rate;
+	struct module *owner;
+	void (*calc) (struct clk *);
+	struct clk *parent;
+	int reg, bit;		/* CLK_HAS_CTRL */
+	int div_shift;		/* only used by generic_div_clk_calc */
+};
+
+static LIST_HEAD(clocks);
+static DEFINE_MUTEX(clocks_mutex);
+
+static struct clk *mpc5121_clk_get(struct device *dev, const char *id)
+{
+	struct clk *p, *clk = ERR_PTR(-ENOENT);
+	int dev_match = 0;
+	int id_match = 0;
+
+	if (dev == NULL && id == NULL)
+		return NULL;
+
+	mutex_lock(&clocks_mutex);
+	list_for_each_entry(p, &clocks, node) {
+		if (dev && dev == p->dev)
+			dev_match++;
+		if (strcmp(id, p->name) == 0)
+			id_match++;
+		if ((dev_match || id_match) && try_module_get(p->owner)) {
+			clk = p;
+			break;
+		}
+	}
+	mutex_unlock(&clocks_mutex);
+
+	return clk;
+}
+
+#ifdef CLK_DEBUG
+static void dump_clocks(void)
+{
+	struct clk *p;
+
+	mutex_lock(&clocks_mutex);
+	printk(KERN_INFO "CLOCKS:\n");
+	list_for_each_entry(p, &clocks, node) {
+		printk(KERN_INFO "  %s %ld", p->name, p->rate);
+		if (p->parent)
+			printk(KERN_INFO " %s %ld", p->parent->name,
+			       p->parent->rate);
+		if (p->flags & CLK_HAS_CTRL)
+			printk(KERN_INFO " reg/bit %d/%d", p->reg, p->bit);
+		printk("\n");
+	}
+	mutex_unlock(&clocks_mutex);
+}
+#define	DEBUG_CLK_DUMP() dump_clocks()
+#else
+#define	DEBUG_CLK_DUMP()
+#endif
+
+
+static void mpc5121_clk_put(struct clk *clk)
+{
+	module_put(clk->owner);
+}
+
+#define NRPSC 12
+
+struct mpc512x_clockctl {
+	u32 spmr;		/* System PLL Mode Reg */
+	u32 sccr[2];		/* System Clk Ctrl Reg 1 & 2 */
+	u32 scfr1;		/* System Clk Freq Reg 1 */
+	u32 scfr2;		/* System Clk Freq Reg 2 */
+	u32 reserved;
+	u32 bcr;		/* Bread Crumb Reg */
+	u32 pccr[NRPSC];	/* PSC Clk Ctrl Reg 0-11 */
+	u32 spccr;		/* SPDIF Clk Ctrl Reg */
+	u32 cccr;		/* CFM Clk Ctrl Reg */
+	u32 dccr;		/* DIU Clk Cnfg Reg */
+};
+
+struct mpc512x_clockctl __iomem *clockctl;
+
+static int mpc5121_clk_enable(struct clk *clk)
+{
+	unsigned int mask;
+
+	if (clk->flags & CLK_HAS_CTRL) {
+		mask = in_be32(&clockctl->sccr[clk->reg]);
+		mask |= 1 << clk->bit;
+		out_be32(&clockctl->sccr[clk->reg], mask);
+	}
+	return 0;
+}
+
+static void mpc5121_clk_disable(struct clk *clk)
+{
+	unsigned int mask;
+
+	if (clk->flags & CLK_HAS_CTRL) {
+		mask = in_be32(&clockctl->sccr[clk->reg]);
+		mask &= ~(1 << clk->bit);
+		out_be32(&clockctl->sccr[clk->reg], mask);
+	}
+}
+
+static unsigned long mpc5121_clk_get_rate(struct clk *clk)
+{
+	if (clk->flags & CLK_HAS_RATE)
+		return clk->rate;
+	else
+		return 0;
+}
+
+static long mpc5121_clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	return rate;
+}
+
+static int mpc5121_clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	return 0;
+}
+
+static int clk_register(struct clk *clk)
+{
+	mutex_lock(&clocks_mutex);
+	list_add(&clk->node, &clocks);
+	mutex_unlock(&clocks_mutex);
+	return 0;
+}
+
+static unsigned long spmf_mult(void)
+{
+	/*
+	 * Convert spmf to multiplier
+	 */
+	static int spmf_to_mult[] = {
+		68, 1, 12, 16,
+		20, 24, 28, 32,
+		36, 40, 44, 48,
+		52, 56, 60, 64
+	};
+	int spmf = (clockctl->spmr >> 24) & 0xf;
+	return spmf_to_mult[spmf];
+}
+
+static unsigned long sysdiv_div_x_2(void)
+{
+	/*
+	 * Convert sysdiv to divisor x 2
+	 * Some divisors have fractional parts so
+	 * multiply by 2 then divide by this value
+	 */
+	static int sysdiv_to_div_x_2[] = {
+		4, 5, 6, 7,
+		8, 9, 10, 14,
+		12, 16, 18, 22,
+		20, 24, 26, 30,
+		28, 32, 34, 38,
+		36, 40, 42, 46,
+		44, 48, 50, 54,
+		52, 56, 58, 62,
+		60, 64, 66,
+	};
+	int sysdiv = (clockctl->scfr2 >> 26) & 0x3f;
+	return sysdiv_to_div_x_2[sysdiv];
+}
+
+static unsigned long ref_to_sys(unsigned long rate)
+{
+	rate *= spmf_mult();
+	rate *= 2;
+	rate /= sysdiv_div_x_2();
+
+	return rate;
+}
+
+static unsigned long sys_to_ref(unsigned long rate)
+{
+	rate *= sysdiv_div_x_2();
+	rate /= 2;
+	rate /= spmf_mult();
+
+	return rate;
+}
+
+static long ips_to_ref(unsigned long rate)
+{
+	int ips_div = (clockctl->scfr1 >> 23) & 0x7;
+
+	rate *= ips_div;	/* csb_clk = ips_clk * ips_div */
+	rate *= 2;		/* sys_clk = csb_clk * 2 */
+	return sys_to_ref(rate);
+}
+
+static unsigned long devtree_getfreq(char *clockname)
+{
+	struct device_node *np;
+	const unsigned int *prop;
+	unsigned int val = 0;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-immr");
+	if (np) {
+		prop = of_get_property(np, clockname, NULL);
+		if (prop)
+			val = *prop;
+	    of_node_put(np);
+	}
+	return val;
+}
+
+static void ref_clk_calc(struct clk *clk)
+{
+	unsigned long rate;
+
+	rate = devtree_getfreq("bus-frequency");
+	if (rate == 0) {
+		printk(KERN_ERR "No bus-frequency in dev tree\n");
+		clk->rate = 0;
+		return;
+	}
+	clk->rate = ips_to_ref(rate);
+}
+
+static struct clk ref_clk = {
+	.name = "ref_clk",
+	.calc = ref_clk_calc,
+};
+
+
+static void sys_clk_calc(struct clk *clk)
+{
+	clk->rate = ref_to_sys(ref_clk.rate);
+}
+
+static struct clk sys_clk = {
+	.name = "sys_clk",
+	.calc = sys_clk_calc,
+};
+
+static void diu_clk_calc(struct clk *clk)
+{
+	int diudiv_x_2 = clockctl->scfr1 & 0xff;
+	unsigned long rate;
+
+	rate = sys_clk.rate;
+
+	rate *= 2;
+	rate /= diudiv_x_2;
+
+	clk->rate = rate;
+}
+
+static void half_clk_calc(struct clk *clk)
+{
+	clk->rate = clk->parent->rate / 2;
+}
+
+static void generic_div_clk_calc(struct clk *clk)
+{
+	int div = (clockctl->scfr1 >> clk->div_shift) & 0x7;
+
+	clk->rate = clk->parent->rate / div;
+}
+
+static void unity_clk_calc(struct clk *clk)
+{
+	clk->rate = clk->parent->rate;
+}
+
+static struct clk csb_clk = {
+	.name = "csb_clk",
+	.calc = half_clk_calc,
+	.parent = &sys_clk,
+};
+
+static void e300_clk_calc(struct clk *clk)
+{
+	int spmf = (clockctl->spmr >> 16) & 0xf;
+	int ratex2 = clk->parent->rate * spmf;
+
+	clk->rate = ratex2 / 2;
+}
+
+static struct clk e300_clk = {
+	.name = "e300_clk",
+	.calc = e300_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk ips_clk = {
+	.name = "ips_clk",
+	.calc = generic_div_clk_calc,
+	.parent = &csb_clk,
+	.div_shift = 23,
+};
+
+/*
+ * Clocks controlled by SCCR1 (.reg = 0)
+ */
+static struct clk lpc_clk = {
+	.name = "lpc_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 30,
+	.calc = generic_div_clk_calc,
+	.parent = &ips_clk,
+	.div_shift = 11,
+};
+
+static struct clk nfc_clk = {
+	.name = "nfc_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 29,
+	.calc = generic_div_clk_calc,
+	.parent = &ips_clk,
+	.div_shift = 8,
+};
+
+static struct clk pata_clk = {
+	.name = "pata_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 28,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+/*
+ * PSC clocks (bits 27 - 16)
+ * are setup elsewhere
+ */
+
+static struct clk sata_clk = {
+	.name = "sata_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 14,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk fec_clk = {
+	.name = "fec_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 13,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk pci_clk = {
+	.name = "pci_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 0,
+	.bit = 11,
+	.calc = generic_div_clk_calc,
+	.parent = &csb_clk,
+	.div_shift = 20,
+};
+
+/*
+ * Clocks controlled by SCCR2 (.reg = 1)
+ */
+static struct clk diu_clk = {
+	.name = "diu_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 31,
+	.calc = diu_clk_calc,
+};
+
+static struct clk axe_clk = {
+	.name = "axe_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 30,
+	.calc = unity_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk usb1_clk = {
+	.name = "usb1_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 28,
+	.calc = unity_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk usb2_clk = {
+	.name = "usb2_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 27,
+	.calc = unity_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk i2c_clk = {
+	.name = "i2c_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 26,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk mscan_clk = {
+	.name = "mscan_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 25,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk sdhc_clk = {
+	.name = "sdhc_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 24,
+	.calc = unity_clk_calc,
+	.parent = &ips_clk,
+};
+
+static struct clk mbx_bus_clk = {
+	.name = "mbx_bus_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 22,
+	.calc = half_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk mbx_clk = {
+	.name = "mbx_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 21,
+	.calc = unity_clk_calc,
+	.parent = &csb_clk,
+};
+
+static struct clk mbx_3d_clk = {
+	.name = "mbx_3d_clk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 20,
+	.calc = generic_div_clk_calc,
+	.parent = &mbx_bus_clk,
+	.div_shift = 14,
+};
+
+static void psc_mclk_in_calc(struct clk *clk)
+{
+	clk->rate = devtree_getfreq("psc_mclk_in");
+	if (!clk->rate)
+		clk->rate = 25000000;
+}
+
+static struct clk psc_mclk_in = {
+	.name = "psc_mclk_in",
+	.calc = psc_mclk_in_calc,
+};
+
+static struct clk spdif_txclk = {
+	.name = "spdif_txclk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 23,
+};
+
+static struct clk spdif_rxclk = {
+	.name = "spdif_rxclk",
+	.flags = CLK_HAS_CTRL,
+	.reg = 1,
+	.bit = 23,
+};
+
+static void ac97_clk_calc(struct clk *clk)
+{
+	/* ac97 bit clock is always 24.567 MHz */
+	clk->rate = 24567000;
+}
+
+static struct clk ac97_clk = {
+	.name = "ac97_clk_in",
+	.calc = ac97_clk_calc,
+};
+
+struct clk *rate_clks[] = {
+	&ref_clk,
+	&sys_clk,
+	&diu_clk,
+	&csb_clk,
+	&e300_clk,
+	&ips_clk,
+	&fec_clk,
+	&sata_clk,
+	&pata_clk,
+	&nfc_clk,
+	&lpc_clk,
+	&mbx_bus_clk,
+	&mbx_clk,
+	&mbx_3d_clk,
+	&axe_clk,
+	&usb1_clk,
+	&usb2_clk,
+	&i2c_clk,
+	&mscan_clk,
+	&sdhc_clk,
+	&pci_clk,
+	&psc_mclk_in,
+	&spdif_txclk,
+	&spdif_rxclk,
+	&ac97_clk,
+	NULL
+};
+
+static void rate_clk_init(struct clk *clk)
+{
+	if (clk->calc) {
+		clk->calc(clk);
+		clk->flags |= CLK_HAS_RATE;
+		clk_register(clk);
+	} else {
+		printk(KERN_WARNING
+		       "Could not initialize clk %s without a calc routine\n",
+		       clk->name);
+	}
+}
+
+static void rate_clks_init(void)
+{
+	struct clk **cpp, *clk;
+
+	cpp = rate_clks;
+	while ((clk = *cpp++))
+		rate_clk_init(clk);
+}
+
+/*
+ * There are two clk enable registers with 32 enable bits each
+ * psc clocks and device clocks are all stored in dev_clks
+ */
+struct clk dev_clks[2][32];
+
+/*
+ * Given a psc number return the dev_clk
+ * associated with it
+ */
+static struct clk *psc_dev_clk(int pscnum)
+{
+	int reg, bit;
+	struct clk *clk;
+
+	reg = 0;
+	bit = 27 - pscnum;
+
+	clk = &dev_clks[reg][bit];
+	clk->reg = 0;
+	clk->bit = bit;
+	return clk;
+}
+
+/*
+ * PSC clock rate calculation
+ */
+static void psc_calc_rate(struct clk *clk, int pscnum, struct device_node *np)
+{
+	unsigned long mclk_src = sys_clk.rate;
+	unsigned long mclk_div;
+
+	/*
+	 * Can only change value of mclk divider
+	 * when the divider is disabled.
+	 *
+	 * Zero is not a valid divider so minimum
+	 * divider is 1
+	 *
+	 * disable/set divider/enable
+	 */
+	out_be32(&clockctl->pccr[pscnum], 0);
+	out_be32(&clockctl->pccr[pscnum], 0x00020000);
+	out_be32(&clockctl->pccr[pscnum], 0x00030000);
+
+	if (clockctl->pccr[pscnum] & 0x80) {
+		clk->rate = spdif_rxclk.rate;
+		return;
+	}
+
+	switch ((clockctl->pccr[pscnum] >> 14) & 0x3) {
+	case 0:
+		mclk_src = sys_clk.rate;
+		break;
+	case 1:
+		mclk_src = ref_clk.rate;
+		break;
+	case 2:
+		mclk_src = psc_mclk_in.rate;
+		break;
+	case 3:
+		mclk_src = spdif_txclk.rate;
+		break;
+	}
+
+	mclk_div = ((clockctl->pccr[pscnum] >> 17) & 0x7fff) + 1;
+	clk->rate = mclk_src / mclk_div;
+}
+
+/*
+ * Find all psc nodes in device tree and assign a clock
+ * with name "psc%d_mclk" and dev pointing at the device
+ * returned from of_find_device_by_node
+ */
+static void psc_clks_init(void)
+{
+	struct device_node *np;
+	const u32 *cell_index;
+	struct of_device *ofdev;
+
+	for_each_compatible_node(np, NULL, "fsl,mpc5121-psc") {
+		cell_index = of_get_property(np, "cell-index", NULL);
+		if (cell_index) {
+			int pscnum = *cell_index;
+			struct clk *clk = psc_dev_clk(pscnum);
+
+			clk->flags = CLK_HAS_RATE | CLK_HAS_CTRL;
+			ofdev = of_find_device_by_node(np);
+			clk->dev = &ofdev->dev;
+			/*
+			 * AC97 is special rate clock does
+			 * not go through normal path
+			 */
+			if (strcmp("ac97", np->name) == 0)
+				clk->rate = ac97_clk.rate;
+			else
+				psc_calc_rate(clk, pscnum, np);
+			sprintf(clk->name, "psc%d_mclk", pscnum);
+			clk_register(clk);
+			clk_enable(clk);
+		}
+	}
+}
+
+static struct clk_interface mpc5121_clk_functions = {
+	.clk_get		= mpc5121_clk_get,
+	.clk_enable		= mpc5121_clk_enable,
+	.clk_disable		= mpc5121_clk_disable,
+	.clk_get_rate		= mpc5121_clk_get_rate,
+	.clk_put		= mpc5121_clk_put,
+	.clk_round_rate		= mpc5121_clk_round_rate,
+	.clk_set_rate		= mpc5121_clk_set_rate,
+	.clk_set_parent		= NULL,
+	.clk_get_parent		= NULL,
+};
+
+static int
+mpc5121_clk_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-clock");
+	if (np) {
+		clockctl = of_iomap(np, 0);
+		of_node_put(np);
+	}
+
+	if (!clockctl) {
+		printk(KERN_ERR "Could not map clock control registers\n");
+		return 0;
+	}
+
+	rate_clks_init();
+	psc_clks_init();
+
+	/* leave clockctl mapped forever */
+	/*iounmap(clockctl); */
+	DEBUG_CLK_DUMP();
+	clocks_initialized++;
+	clk_functions = mpc5121_clk_functions;
+	return 0;
+}
+
+
+arch_initcall(mpc5121_clk_init);
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c
index 50bd3a319022..5ebf6939a697 100644
--- a/arch/powerpc/platforms/512x/mpc5121_ads.c
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.c
@@ -1,5 +1,5 @@
 /*
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc. All rights reserved.
  *
  * Author: John Rigby, <jrigby@freescale.com>, Thur Mar 29 2007
  *
@@ -15,7 +15,6 @@
 
 #include <linux/kernel.h>
 #include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/of_platform.h>
 
 #include <asm/machdep.h>
@@ -23,65 +22,22 @@
 #include <asm/prom.h>
 #include <asm/time.h>
 
-/**
- * 	mpc512x_find_ips_freq - Find the IPS bus frequency for a device
- * 	@node:	device node
- *
- * 	Returns IPS bus frequency, or 0 if the bus frequency cannot be found.
- */
-unsigned long
-mpc512x_find_ips_freq(struct device_node *node)
-{
-	struct device_node *np;
-	const unsigned int *p_ips_freq = NULL;
-
-	of_node_get(node);
-	while (node) {
-		p_ips_freq = of_get_property(node, "bus-frequency", NULL);
-		if (p_ips_freq)
-			break;
-
-		np = of_get_parent(node);
-		of_node_put(node);
-		node = np;
-	}
-	if (node)
-		of_node_put(node);
-
-	return p_ips_freq ? *p_ips_freq : 0;
-}
-EXPORT_SYMBOL(mpc512x_find_ips_freq);
-
-static struct of_device_id __initdata of_bus_ids[] = {
-	{ .name = "soc", },
-	{ .name = "localbus", },
-	{},
-};
+#include "mpc512x.h"
+#include "mpc5121_ads.h"
 
-static void __init mpc5121_ads_declare_of_platform_devices(void)
+static void __init mpc5121_ads_setup_arch(void)
 {
-	/* Find every child of the SOC node and add it to of_platform */
-	if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
-		printk(KERN_ERR __FILE__ ": "
-			"Error while probing of_platform bus\n");
+	printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n");
+	/*
+	 * cpld regs are needed early
+	 */
+	mpc5121_ads_cpld_map();
 }
 
 static void __init mpc5121_ads_init_IRQ(void)
 {
-	struct device_node *np;
-
-	np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
-	if (!np)
-		return;
-
-	ipic_init(np, 0);
-	of_node_put(np);
-
-	/*
-	 * Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	ipic_set_default_priority();
+	mpc512x_init_IRQ();
+	mpc5121_ads_cpld_pic_init();
 }
 
 /*
@@ -97,7 +53,8 @@ static int __init mpc5121_ads_probe(void)
 define_machine(mpc5121_ads) {
 	.name			= "MPC5121 ADS",
 	.probe			= mpc5121_ads_probe,
-	.init			= mpc5121_ads_declare_of_platform_devices,
+	.setup_arch		= mpc5121_ads_setup_arch,
+	.init			= mpc512x_declare_of_platform_devices,
 	.init_IRQ		= mpc5121_ads_init_IRQ,
 	.get_irq		= ipic_get_irq,
 	.calibrate_decr		= generic_calibrate_decr,
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.h b/arch/powerpc/platforms/512x/mpc5121_ads.h
new file mode 100644
index 000000000000..662076cfee2f
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_ads.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Prototypes for ADS5121 specific code
+ */
+
+#ifndef __MPC512ADS_H__
+#define __MPC512ADS_H__
+extern void __init mpc5121_ads_cpld_map(void);
+extern void __init mpc5121_ads_cpld_pic_init(void);
+#endif				/* __MPC512ADS_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
new file mode 100644
index 000000000000..a6ce80566625
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
@@ -0,0 +1,204 @@
+/*
+ * Copyright (C) 2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC5121ADS CPLD irq handling
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/prom.h>
+
+static struct device_node *cpld_pic_node;
+static struct irq_host *cpld_pic_host;
+
+/*
+ * Bits to ignore in the misc_status register
+ * 0x10 touch screen pendown is hard routed to irq1
+ * 0x02 pci status is read from pci status register
+ */
+#define MISC_IGNORE 0x12
+
+/*
+ * Nothing to ignore in pci status register
+ */
+#define PCI_IGNORE 0x00
+
+struct cpld_pic {
+	u8 pci_mask;
+	u8 pci_status;
+	u8 route;
+	u8 misc_mask;
+	u8 misc_status;
+	u8 misc_control;
+};
+
+static struct cpld_pic __iomem *cpld_regs;
+
+static void __iomem *
+irq_to_pic_mask(unsigned int irq)
+{
+	return irq <= 7 ? &cpld_regs->pci_mask : &cpld_regs->misc_mask;
+}
+
+static unsigned int
+irq_to_pic_bit(unsigned int irq)
+{
+	return 1 << (irq & 0x7);
+}
+
+static void
+cpld_mask_irq(unsigned int irq)
+{
+	unsigned int cpld_irq = (unsigned int)irq_map[irq].hwirq;
+	void __iomem *pic_mask = irq_to_pic_mask(cpld_irq);
+
+	out_8(pic_mask,
+	      in_8(pic_mask) | irq_to_pic_bit(cpld_irq));
+}
+
+static void
+cpld_unmask_irq(unsigned int irq)
+{
+	unsigned int cpld_irq = (unsigned int)irq_map[irq].hwirq;
+	void __iomem *pic_mask = irq_to_pic_mask(cpld_irq);
+
+	out_8(pic_mask,
+	      in_8(pic_mask) & ~irq_to_pic_bit(cpld_irq));
+}
+
+static struct irq_chip cpld_pic = {
+	.typename = " CPLD PIC ",
+	.mask = cpld_mask_irq,
+	.ack = cpld_mask_irq,
+	.unmask = cpld_unmask_irq,
+};
+
+static int
+cpld_pic_get_irq(int offset, u8 ignore, u8 __iomem *statusp,
+			    u8 __iomem *maskp)
+{
+	int cpld_irq;
+	u8 status = in_8(statusp);
+	u8 mask = in_8(maskp);
+
+	/* ignore don't cares and masked irqs */
+	status |= (ignore | mask);
+
+	if (status == 0xff)
+		return NO_IRQ_IGNORE;
+
+	cpld_irq = ffz(status) + offset;
+
+	return irq_linear_revmap(cpld_pic_host, cpld_irq);
+}
+
+static void
+cpld_pic_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	irq = cpld_pic_get_irq(0, PCI_IGNORE, &cpld_regs->pci_status,
+		&cpld_regs->pci_mask);
+	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
+		generic_handle_irq(irq);
+		return;
+	}
+
+	irq = cpld_pic_get_irq(8, MISC_IGNORE, &cpld_regs->misc_status,
+		&cpld_regs->misc_mask);
+	if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) {
+		generic_handle_irq(irq);
+		return;
+	}
+}
+
+static int
+cpld_pic_host_match(struct irq_host *h, struct device_node *node)
+{
+	return cpld_pic_node == node;
+}
+
+static int
+cpld_pic_host_map(struct irq_host *h, unsigned int virq,
+			     irq_hw_number_t hw)
+{
+	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	set_irq_chip_and_handler(virq, &cpld_pic, handle_level_irq);
+	return 0;
+}
+
+static struct
+irq_host_ops cpld_pic_host_ops = {
+	.match = cpld_pic_host_match,
+	.map = cpld_pic_host_map,
+};
+
+void __init
+mpc5121_ads_cpld_map(void)
+{
+	struct device_node *np = NULL;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld-pic");
+	if (!np) {
+		printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n");
+		return;
+	}
+
+	cpld_regs = of_iomap(np, 0);
+	of_node_put(np);
+}
+
+void __init
+mpc5121_ads_cpld_pic_init(void)
+{
+	unsigned int cascade_irq;
+	struct device_node *np = NULL;
+
+	pr_debug("cpld_ic_init\n");
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld-pic");
+	if (!np) {
+		printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n");
+		return;
+	}
+
+	if (!cpld_regs)
+		goto end;
+
+	cascade_irq = irq_of_parse_and_map(np, 0);
+	if (cascade_irq == NO_IRQ)
+		goto end;
+
+	/*
+	 * statically route touch screen pendown through 1
+	 * and ignore it here
+	 * route all others through our cascade irq
+	 */
+	out_8(&cpld_regs->route, 0xfd);
+	out_8(&cpld_regs->pci_mask, 0xff);
+	/* unmask pci ints in misc mask */
+	out_8(&cpld_regs->misc_mask, ~(MISC_IGNORE));
+
+	cpld_pic_node = of_node_get(np);
+
+	cpld_pic_host =
+	    irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 16, &cpld_pic_host_ops, 16);
+	if (!cpld_pic_host) {
+		printk(KERN_ERR "CPLD PIC: failed to allocate irq host!\n");
+		goto end;
+	}
+
+	set_irq_chained_handler(cascade_irq, cpld_pic_cascade);
+end:
+	of_node_put(np);
+}
diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c
new file mode 100644
index 000000000000..2479de9e2d12
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc5121_generic.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby, <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC5121 SoC setup
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+
+#include "mpc512x.h"
+
+/*
+ * list of supported boards
+ */
+static char *board[] __initdata = {
+	"prt,prtlvt",
+	NULL
+};
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init mpc5121_generic_probe(void)
+{
+	unsigned long node = of_get_flat_dt_root();
+	int i = 0;
+
+	while (board[i]) {
+		if (of_flat_dt_is_compatible(node, board[i]))
+			break;
+		i++;
+	}
+
+	return board[i] != NULL;
+}
+
+define_machine(mpc5121_generic) {
+	.name			= "MPC5121 generic",
+	.probe			= mpc5121_generic_probe,
+	.init			= mpc512x_declare_of_platform_devices,
+	.init_IRQ		= mpc512x_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.calibrate_decr		= generic_calibrate_decr,
+};
diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h
new file mode 100644
index 000000000000..9c03693cb009
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc512x.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Prototypes for MPC512x shared code
+ */
+
+#ifndef __MPC512X_H__
+#define __MPC512X_H__
+extern unsigned long mpc512x_find_ips_freq(struct device_node *node);
+extern void __init mpc512x_init_IRQ(void);
+void __init mpc512x_declare_of_platform_devices(void);
+#endif				/* __MPC512X_H__ */
diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c
new file mode 100644
index 000000000000..d8cd579f3191
--- /dev/null
+++ b/arch/powerpc/platforms/512x/mpc512x_shared.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: John Rigby <jrigby@freescale.com>
+ *
+ * Description:
+ * MPC512x Shared code
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/ipic.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+
+#include "mpc512x.h"
+
+unsigned long
+mpc512x_find_ips_freq(struct device_node *node)
+{
+	struct device_node *np;
+	const unsigned int *p_ips_freq = NULL;
+
+	of_node_get(node);
+	while (node) {
+		p_ips_freq = of_get_property(node, "bus-frequency", NULL);
+		if (p_ips_freq)
+			break;
+
+		np = of_get_parent(node);
+		of_node_put(node);
+		node = np;
+	}
+	if (node)
+		of_node_put(node);
+
+	return p_ips_freq ? *p_ips_freq : 0;
+}
+EXPORT_SYMBOL(mpc512x_find_ips_freq);
+
+void __init mpc512x_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+	of_node_put(np);
+
+	/*
+	 * Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+}
+
+/*
+ * Nodes to do bus probe on, soc and localbus
+ */
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .compatible = "fsl,mpc5121-immr", },
+	{ .compatible = "fsl,mpc5121-localbus", },
+	{},
+};
+
+void __init mpc512x_declare_of_platform_devices(void)
+{
+	if (of_platform_bus_probe(NULL, of_bus_ids, NULL))
+		printk(KERN_ERR __FILE__ ": "
+			"Error while probing of_platform bus\n");
+}
+
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index acd2fc8cf492..696a5ee4962d 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -1,8 +1,8 @@
 config PPC_MPC52xx
 	bool "52xx-based boards"
 	depends on PPC_MULTIPLATFORM && PPC32
-	select FSL_SOC
 	select PPC_CLOCK
+	select PPC_PCI_CHOICE
 
 config PPC_MPC5200_SIMPLE
 	bool "Generic support for simple MPC5200 based boards"
@@ -47,6 +47,7 @@ config PPC_MPC5200_BUGFIX
 config PPC_MPC5200_GPIO
 	bool "MPC5200 GPIO support"
 	depends on PPC_MPC52xx
-	select HAVE_GPIO_LIB
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
 	help
 	  Enable gpiolib support for mpc5200 based boards
diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile
index daf0e1568d6d..b8a52062738a 100644
--- a/arch/powerpc/platforms/52xx/Makefile
+++ b/arch/powerpc/platforms/52xx/Makefile
@@ -1,10 +1,8 @@
 #
 # Makefile for 52xx based boards
 #
-ifeq ($(CONFIG_PPC_MERGE),y)
 obj-y				+= mpc52xx_pic.o mpc52xx_common.o
 obj-$(CONFIG_PCI)		+= mpc52xx_pci.o
-endif
 
 obj-$(CONFIG_PPC_MPC5200_SIMPLE) += mpc5200_simple.o
 obj-$(CONFIG_PPC_EFIKA)		+= efika.o
@@ -15,4 +13,4 @@ ifeq ($(CONFIG_PPC_LITE5200),y)
 	obj-$(CONFIG_PM)	+= lite5200_sleep.o lite5200_pm.o
 endif
 
-obj-$(CONFIG_PPC_MPC5200_GPIO)	+= mpc52xx_gpio.o
\ No newline at end of file
+obj-$(CONFIG_PPC_MPC5200_GPIO)	+= mpc52xx_gpio.o
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
index e3428ddd9040..5a382bb15f62 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c
@@ -63,6 +63,7 @@
 
 #define MPC52xx_PCI_TCR_P		0x01000000
 #define MPC52xx_PCI_TCR_LD		0x00010000
+#define MPC52xx_PCI_TCR_WCT8		0x00000008
 
 #define MPC52xx_PCI_TBATR_DISABLE	0x0
 #define MPC52xx_PCI_TBATR_ENABLE	0x1
@@ -313,7 +314,7 @@ mpc52xx_pci_setup(struct pci_controller *hose,
 	out_be32(&pci_regs->tbatr1,
 		MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM );
 
-	out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD);
+	out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD | MPC52xx_PCI_TCR_WCT8);
 
 	tmp = in_be32(&pci_regs->gscr);
 #if 0
diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig
index 917ac8891555..75eb1ede5497 100644
--- a/arch/powerpc/platforms/82xx/Kconfig
+++ b/arch/powerpc/platforms/82xx/Kconfig
@@ -1,7 +1,8 @@
-choice
-	prompt "82xx Board Type"
-	depends on PPC_82xx
-	default MPC8272_ADS
+menuconfig PPC_82xx
+	bool "82xx-based boards (PQ II)"
+	depends on 6xx && PPC_MULTIPLATFORM
+
+if PPC_82xx
 
 config MPC8272_ADS
 	bool "Freescale MPC8272 ADS"
@@ -29,6 +30,7 @@ config EP8248E
 	select 8272
 	select 8260
 	select FSL_SOC
+	select PHYLIB
 	select MDIO_BITBANG
 	help
 	  This enables support for the Embedded Planet EP8248E board.
@@ -36,7 +38,7 @@ config EP8248E
 	  This board is also resold by Freescale as the QUICCStart
 	  MPC8248 Evaluation System and/or the CWH-PPC-8248N-VE.
 
-endchoice
+endif
 
 config PQ2ADS
 	bool
diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c
index 7d3018751988..8054c685d323 100644
--- a/arch/powerpc/platforms/82xx/mpc8272_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c
@@ -96,6 +96,10 @@ static struct cpm_pin mpc8272_ads_pins[] = {
 	{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 	{2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+	/* I2C */
+	{3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+	{3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
 };
 
 static void __init init_ioports(void)
diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
index a8013816125c..9876d7e072f4 100644
--- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
+++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c
@@ -109,7 +109,7 @@ static int pci_pic_host_map(struct irq_host *h, unsigned int virq,
 {
 	get_irq_desc(virq)->status |= IRQ_LEVEL;
 	set_irq_chip_data(virq, h->host_data);
-	set_irq_chip(virq, &pq2ads_pci_ic);
+	set_irq_chip_and_handler(virq, &pq2ads_pci_ic, handle_level_irq);
 	return 0;
 }
 
diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig
index 13587e2e8680..6159c5d4e5f1 100644
--- a/arch/powerpc/platforms/83xx/Kconfig
+++ b/arch/powerpc/platforms/83xx/Kconfig
@@ -1,10 +1,13 @@
-menuconfig MPC83xx
-	bool "83xx Board Type"
-	depends on PPC_83xx
+menuconfig PPC_83xx
+	bool "83xx-based boards"
+	depends on 6xx && PPC_MULTIPLATFORM
 	select PPC_UDBG_16550
-	select PPC_INDIRECT_PCI
+	select PPC_PCI_CHOICE
+	select FSL_PCI if PCI
+	select FSL_SOC
+	select IPIC
 
-if MPC83xx
+if PPC_83xx
 
 config MPC831x_RDB
 	bool "Freescale MPC831x RDB"
@@ -58,6 +61,17 @@ config MPC836x_MDS
 	help
 	  This option enables support for the MPC836x MDS Processor Board.
 
+config MPC836x_RDK
+	bool "Freescale/Logic MPC836x RDK"
+	select DEFAULT_UIMAGE
+	select QUICC_ENGINE
+	select QE_GPIO
+	select FSL_GTM
+	select FSL_LBC
+	help
+	  This option enables support for the MPC836x RDK Processor Board,
+	  also known as ZOOM PowerQUICC Kit.
+
 config MPC837x_MDS
 	bool "Freescale MPC837x MDS"
 	select DEFAULT_UIMAGE
@@ -79,6 +93,15 @@ config SBC834x
 	help
 	  This option enables support for the Wind River SBC834x board.
 
+config ASP834x
+	bool "Analogue & Micro ASP 834x"
+	select PPC_MPC834x
+	select REDBOOT
+	help
+	  This enables support for the Analogue & Micro ASP 83xx
+	  board.
+
+
 endif
 
 # used for usb
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile
index 7e6dd3e259d8..ba5028e29890 100644
--- a/arch/powerpc/platforms/83xx/Makefile
+++ b/arch/powerpc/platforms/83xx/Makefile
@@ -2,13 +2,15 @@
 # Makefile for the PowerPC 83xx linux kernel.
 #
 obj-y				:= misc.o usb.o
-obj-$(CONFIG_PCI)		+= pci.o
+obj-$(CONFIG_SUSPEND)		+= suspend.o suspend-asm.o
 obj-$(CONFIG_MPC831x_RDB)	+= mpc831x_rdb.o
 obj-$(CONFIG_MPC832x_RDB)	+= mpc832x_rdb.o
 obj-$(CONFIG_MPC834x_MDS)	+= mpc834x_mds.o
 obj-$(CONFIG_MPC834x_ITX)	+= mpc834x_itx.o
 obj-$(CONFIG_MPC836x_MDS)	+= mpc836x_mds.o
+obj-$(CONFIG_MPC836x_RDK)	+= mpc836x_rdk.o
 obj-$(CONFIG_MPC832x_MDS)	+= mpc832x_mds.o
 obj-$(CONFIG_MPC837x_MDS)	+= mpc837x_mds.o
 obj-$(CONFIG_SBC834x)		+= sbc834x.o
 obj-$(CONFIG_MPC837x_RDB)	+= mpc837x_rdb.o
+obj-$(CONFIG_ASP834x)		+= asp834x.o
diff --git a/arch/powerpc/platforms/83xx/asp834x.c b/arch/powerpc/platforms/83xx/asp834x.c
new file mode 100644
index 000000000000..bb30d67ad0a2
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/asp834x.c
@@ -0,0 +1,90 @@
+/*
+ * arch/powerpc/platforms/83xx/asp834x.c
+ *
+ * Analogue & Micro ASP8347 board specific routines
+ * clone of mpc834x_itx
+ *
+ * Copyright 2008 Codehermit
+ *
+ * Maintainer: Bryan O'Donoghue <bodonoghue@codhermit.ie>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+
+#include "mpc83xx.h"
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init asp834x_setup_arch(void)
+{
+	if (ppc_md.progress)
+		ppc_md.progress("asp834x_setup_arch()", 0);
+
+	mpc834x_usb_cfg();
+}
+
+static void __init asp834x_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+
+	of_node_put(np);
+
+	/* Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+}
+
+static struct __initdata of_device_id asp8347_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init asp8347_declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, asp8347_ids, NULL);
+	return 0;
+}
+machine_device_initcall(asp834x, asp8347_declare_of_platform_devices);
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init asp834x_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+	return of_flat_dt_is_compatible(root, "analogue-and-micro,asp8347e");
+}
+
+define_machine(asp834x) {
+	.name			= "ASP8347E",
+	.probe			= asp834x_probe,
+	.setup_arch		= asp834x_setup_arch,
+	.init_IRQ		= asp834x_init_IRQ,
+	.get_irq		= ipic_get_irq,
+	.restart		= mpc83xx_restart,
+	.time_init		= mpc83xx_time_init,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index c4db5172b27a..a428f8d1ac80 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -19,6 +19,7 @@
 #include <asm/time.h>
 #include <asm/ipic.h>
 #include <asm/udbg.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index 6dbc6eabcb02..ec43477caa63 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -36,6 +36,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 
@@ -104,6 +105,7 @@ static void __init mpc832x_sys_setup_arch(void)
 static struct of_device_id mpc832x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index e7f706b624fe..0300268ce5b8 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -27,6 +27,7 @@
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
@@ -114,6 +115,7 @@ static void __init mpc832x_rdb_setup_arch(void)
 static struct of_device_id mpc832x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c
index 50e8f632061c..76092d37c7d9 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_itx.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c
@@ -35,11 +35,13 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
 static struct of_device_id __initdata mpc834x_itx_ids[] = {
 	{ .compatible = "fsl,pq2pro-localbus", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c
index 2b8a0a3f8557..fc3f2ed1f3e9 100644
--- a/arch/powerpc/platforms/83xx/mpc834x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c
@@ -35,6 +35,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
@@ -110,6 +111,7 @@ static void __init mpc834x_mds_init_IRQ(void)
 static struct of_device_id mpc834x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index c2e5de60c055..9d46e5bdd101 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -42,6 +42,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 
@@ -135,6 +136,7 @@ static void __init mpc836x_mds_setup_arch(void)
 static struct of_device_id mpc836x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
new file mode 100644
index 000000000000..a5273bb28e1b
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -0,0 +1,103 @@
+/*
+ * MPC8360E-RDK board file.
+ *
+ * Copyright (c) 2006  Freescale Semicondutor, Inc.
+ * Copyright (c) 2007-2008  MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/ipic.h>
+#include <asm/udbg.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "mpc83xx.h"
+
+static struct of_device_id __initdata mpc836x_rdk_ids[] = {
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init mpc836x_rdk_declare_of_platform_devices(void)
+{
+	return of_platform_bus_probe(NULL, mpc836x_rdk_ids, NULL);
+}
+machine_device_initcall(mpc836x_rdk, mpc836x_rdk_declare_of_platform_devices);
+
+static void __init mpc836x_rdk_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc836x_rdk_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
+		mpc83xx_add_bridge(np);
+#endif
+
+	qe_reset();
+}
+
+static void __init mpc836x_rdk_init_IRQ(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
+	if (!np)
+		return;
+
+	ipic_init(np, 0);
+
+	/*
+	 * Initialize the default interrupt mapping priorities,
+	 * in case the boot rom changed something on us.
+	 */
+	ipic_set_default_priority();
+	of_node_put(np);
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+	if (!np)
+		return;
+
+	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
+	of_node_put(np);
+}
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened.
+ */
+static int __init mpc836x_rdk_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,mpc8360rdk");
+}
+
+define_machine(mpc836x_rdk) {
+	.name		= "MPC836x RDK",
+	.probe		= mpc836x_rdk_probe,
+	.setup_arch	= mpc836x_rdk_setup_arch,
+	.init_IRQ	= mpc836x_rdk_init_IRQ,
+	.get_irq	= ipic_get_irq,
+	.restart	= mpc83xx_restart,
+	.time_init	= mpc83xx_time_init,
+	.calibrate_decr	= generic_calibrate_decr,
+	.progress	= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index 64d17b0d6455..be62de23bead 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -19,6 +19,7 @@
 #include <asm/ipic.h>
 #include <asm/udbg.h>
 #include <asm/prom.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index c00356bdb1dd..da030afa2e2c 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -17,6 +17,7 @@
 #include <asm/time.h>
 #include <asm/ipic.h>
 #include <asm/udbg.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 88a3b5cabb18..2a7cbabb410a 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -26,6 +26,8 @@
 #define MPC834X_SICRL_USB1         0x20000000
 #define MPC831X_SICRL_USB_MASK     0x00000c00
 #define MPC831X_SICRL_USB_ULPI     0x00000800
+#define MPC8315_SICRL_USB_MASK     0x000000fc
+#define MPC8315_SICRL_USB_ULPI     0x00000054
 #define MPC837X_SICRL_USB_MASK     0xf0000000
 #define MPC837X_SICRL_USB_ULPI     0x50000000
 
@@ -34,6 +36,8 @@
 #define MPC834X_SICRH_USB_UTMI     0x00020000
 #define MPC831X_SICRH_USB_MASK     0x000000e0
 #define MPC831X_SICRH_USB_ULPI     0x000000a0
+#define MPC8315_SICRH_USB_MASK     0x0000ff00
+#define MPC8315_SICRH_USB_ULPI     0x00000000
 
 /* USB Control Register */
 #define FSL_USB2_CONTROL_OFFS      0x500
@@ -55,7 +59,6 @@
  * mpc83xx_* files. Mostly for use by mpc83xx_setup
  */
 
-extern int mpc83xx_add_bridge(struct device_node *dev);
 extern void mpc83xx_restart(char *cmd);
 extern long mpc83xx_time_init(void);
 extern int mpc834x_usb_cfg(void);
diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c
deleted file mode 100644
index 14f1080c6c9d..000000000000
--- a/arch/powerpc/platforms/83xx/pci.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * FSL SoC setup code
- *
- * Maintained by Kumar Gala (see MAINTAINERS for contact information)
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/atomic.h>
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/prom.h>
-#include <sysdev/fsl_soc.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-int __init mpc83xx_add_bridge(struct device_node *dev)
-{
-	int len;
-	struct pci_controller *hose;
-	struct resource rsrc;
-	const int *bus_range;
-	int primary = 1, has_address = 0;
-	phys_addr_t immr = get_immrbase();
-
-	DBG("Adding PCI host bridge %s\n", dev->full_name);
-
-	/* Fetch host bridge registers address */
-	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
-
-	/* Get bus range if any */
-	bus_range = of_get_property(dev, "bus-range", &len);
-	if (bus_range == NULL || len < 2 * sizeof(int)) {
-		printk(KERN_WARNING "Can't get bus-range for %s, assume"
-		       " bus 0\n", dev->full_name);
-	}
-
-	ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
-	hose = pcibios_alloc_controller(dev);
-	if (!hose)
-		return -ENOMEM;
-
-	hose->first_busno = bus_range ? bus_range[0] : 0;
-	hose->last_busno = bus_range ? bus_range[1] : 0xff;
-
-	/* MPC83xx supports up to two host controllers one at 0x8500 from immrbar
-	 * the other at 0x8600, we consider the 0x8500 the primary controller
-	 */
-	/* PCI 1 */
-	if ((rsrc.start & 0xfffff) == 0x8500) {
-		setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0);
-	}
-	/* PCI 2 */
-	if ((rsrc.start & 0xfffff) == 0x8600) {
-		setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0);
-		primary = 0;
-	}
-
-	printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. "
-	       "Firmware bus number: %d->%d\n",
-	       (unsigned long long)rsrc.start, hose->first_busno,
-	       hose->last_busno);
-
-	DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
-	    hose, hose->cfg_addr, hose->cfg_data);
-
-	/* Interpret the "ranges" property */
-	/* This also maps the I/O region and sets isa_io/mem_base */
-	pci_process_bridge_OF_ranges(hose, dev, primary);
-
-	return 0;
-}
diff --git a/arch/powerpc/platforms/83xx/sbc834x.c b/arch/powerpc/platforms/83xx/sbc834x.c
index cf382474a83d..156c4e218009 100644
--- a/arch/powerpc/platforms/83xx/sbc834x.c
+++ b/arch/powerpc/platforms/83xx/sbc834x.c
@@ -37,6 +37,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
 
 #include "mpc83xx.h"
 
@@ -82,6 +83,7 @@ static void __init sbc834x_init_IRQ(void)
 static struct __initdata of_device_id sbc834x_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/83xx/suspend-asm.S b/arch/powerpc/platforms/83xx/suspend-asm.S
new file mode 100644
index 000000000000..1930543c98d3
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/suspend-asm.S
@@ -0,0 +1,533 @@
+/*
+ * Enter and leave deep sleep state on MPC83xx
+ *
+ * Copyright (c) 2006-2008 Freescale Semiconductor, Inc.
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
+#include <asm/asm-offsets.h>
+
+#define SS_MEMSAVE	0x00 /* First 8 bytes of RAM */
+#define SS_HID		0x08 /* 3 HIDs */
+#define SS_IABR		0x14 /* 2 IABRs */
+#define SS_IBCR		0x1c
+#define SS_DABR		0x20 /* 2 DABRs */
+#define SS_DBCR		0x28
+#define SS_SP		0x2c
+#define SS_SR		0x30 /* 16 segment registers */
+#define SS_R2		0x70
+#define SS_MSR		0x74
+#define SS_SDR1		0x78
+#define SS_LR		0x7c
+#define SS_SPRG		0x80 /* 4 SPRGs */
+#define SS_DBAT		0x90 /* 8 DBATs */
+#define SS_IBAT		0xd0 /* 8 IBATs */
+#define SS_TB		0x110
+#define SS_CR		0x118
+#define SS_GPREG	0x11c /* r12-r31 */
+#define STATE_SAVE_SIZE 0x16c
+
+	.section .data
+	.align	5
+
+mpc83xx_sleep_save_area:
+	.space	STATE_SAVE_SIZE
+immrbase:
+	.long	0
+
+	.section .text
+	.align	5
+
+	/* r3 = physical address of IMMR */
+_GLOBAL(mpc83xx_enter_deep_sleep)
+	lis	r4, immrbase@ha
+	stw	r3, immrbase@l(r4)
+
+	/* The first 2 words of memory are used to communicate with the
+	 * bootloader, to tell it how to resume.
+	 *
+	 * The first word is the magic number 0xf5153ae5, and the second
+	 * is the pointer to mpc83xx_deep_resume.
+	 *
+	 * The original content of these two words is saved in SS_MEMSAVE.
+	 */
+
+	lis	r3, mpc83xx_sleep_save_area@h
+	ori	r3, r3, mpc83xx_sleep_save_area@l
+
+	lis	r4, KERNELBASE@h
+	lwz	r5, 0(r4)
+	lwz	r6, 4(r4)
+
+	stw	r5, SS_MEMSAVE+0(r3)
+	stw	r6, SS_MEMSAVE+4(r3)
+
+	mfspr	r5, SPRN_HID0
+	mfspr	r6, SPRN_HID1
+	mfspr	r7, SPRN_HID2
+
+	stw	r5, SS_HID+0(r3)
+	stw	r6, SS_HID+4(r3)
+	stw	r7, SS_HID+8(r3)
+
+	mfspr	r4, SPRN_IABR
+	mfspr	r5, SPRN_IABR2
+	mfspr	r6, SPRN_IBCR
+	mfspr	r7, SPRN_DABR
+	mfspr	r8, SPRN_DABR2
+	mfspr	r9, SPRN_DBCR
+
+	stw	r4, SS_IABR+0(r3)
+	stw	r5, SS_IABR+4(r3)
+	stw	r6, SS_IBCR(r3)
+	stw	r7, SS_DABR+0(r3)
+	stw	r8, SS_DABR+4(r3)
+	stw	r9, SS_DBCR(r3)
+
+	mfspr	r4, SPRN_SPRG0
+	mfspr	r5, SPRN_SPRG1
+	mfspr	r6, SPRN_SPRG2
+	mfspr	r7, SPRN_SPRG3
+	mfsdr1	r8
+
+	stw	r4, SS_SPRG+0(r3)
+	stw	r5, SS_SPRG+4(r3)
+	stw	r6, SS_SPRG+8(r3)
+	stw	r7, SS_SPRG+12(r3)
+	stw	r8, SS_SDR1(r3)
+
+	mfspr	r4, SPRN_DBAT0U
+	mfspr	r5, SPRN_DBAT0L
+	mfspr	r6, SPRN_DBAT1U
+	mfspr	r7, SPRN_DBAT1L
+
+	stw	r4, SS_DBAT+0x00(r3)
+	stw	r5, SS_DBAT+0x04(r3)
+	stw	r6, SS_DBAT+0x08(r3)
+	stw	r7, SS_DBAT+0x0c(r3)
+
+	mfspr	r4, SPRN_DBAT2U
+	mfspr	r5, SPRN_DBAT2L
+	mfspr	r6, SPRN_DBAT3U
+	mfspr	r7, SPRN_DBAT3L
+
+	stw	r4, SS_DBAT+0x10(r3)
+	stw	r5, SS_DBAT+0x14(r3)
+	stw	r6, SS_DBAT+0x18(r3)
+	stw	r7, SS_DBAT+0x1c(r3)
+
+	mfspr	r4, SPRN_DBAT4U
+	mfspr	r5, SPRN_DBAT4L
+	mfspr	r6, SPRN_DBAT5U
+	mfspr	r7, SPRN_DBAT5L
+
+	stw	r4, SS_DBAT+0x20(r3)
+	stw	r5, SS_DBAT+0x24(r3)
+	stw	r6, SS_DBAT+0x28(r3)
+	stw	r7, SS_DBAT+0x2c(r3)
+
+	mfspr	r4, SPRN_DBAT6U
+	mfspr	r5, SPRN_DBAT6L
+	mfspr	r6, SPRN_DBAT7U
+	mfspr	r7, SPRN_DBAT7L
+
+	stw	r4, SS_DBAT+0x30(r3)
+	stw	r5, SS_DBAT+0x34(r3)
+	stw	r6, SS_DBAT+0x38(r3)
+	stw	r7, SS_DBAT+0x3c(r3)
+
+	mfspr	r4, SPRN_IBAT0U
+	mfspr	r5, SPRN_IBAT0L
+	mfspr	r6, SPRN_IBAT1U
+	mfspr	r7, SPRN_IBAT1L
+
+	stw	r4, SS_IBAT+0x00(r3)
+	stw	r5, SS_IBAT+0x04(r3)
+	stw	r6, SS_IBAT+0x08(r3)
+	stw	r7, SS_IBAT+0x0c(r3)
+
+	mfspr	r4, SPRN_IBAT2U
+	mfspr	r5, SPRN_IBAT2L
+	mfspr	r6, SPRN_IBAT3U
+	mfspr	r7, SPRN_IBAT3L
+
+	stw	r4, SS_IBAT+0x10(r3)
+	stw	r5, SS_IBAT+0x14(r3)
+	stw	r6, SS_IBAT+0x18(r3)
+	stw	r7, SS_IBAT+0x1c(r3)
+
+	mfspr	r4, SPRN_IBAT4U
+	mfspr	r5, SPRN_IBAT4L
+	mfspr	r6, SPRN_IBAT5U
+	mfspr	r7, SPRN_IBAT5L
+
+	stw	r4, SS_IBAT+0x20(r3)
+	stw	r5, SS_IBAT+0x24(r3)
+	stw	r6, SS_IBAT+0x28(r3)
+	stw	r7, SS_IBAT+0x2c(r3)
+
+	mfspr	r4, SPRN_IBAT6U
+	mfspr	r5, SPRN_IBAT6L
+	mfspr	r6, SPRN_IBAT7U
+	mfspr	r7, SPRN_IBAT7L
+
+	stw	r4, SS_IBAT+0x30(r3)
+	stw	r5, SS_IBAT+0x34(r3)
+	stw	r6, SS_IBAT+0x38(r3)
+	stw	r7, SS_IBAT+0x3c(r3)
+
+	mfmsr	r4
+	mflr	r5
+	mfcr	r6
+
+	stw	r4, SS_MSR(r3)
+	stw	r5, SS_LR(r3)
+	stw	r6, SS_CR(r3)
+	stw	r1, SS_SP(r3)
+	stw	r2, SS_R2(r3)
+
+1:	mftbu	r4
+	mftb	r5
+	mftbu	r6
+	cmpw	r4, r6
+	bne	1b
+
+	stw	r4, SS_TB+0(r3)
+	stw	r5, SS_TB+4(r3)
+
+	stmw	r12, SS_GPREG(r3)
+
+	li	r4, 0
+	addi	r6, r3, SS_SR-4
+1:	mfsrin	r5, r4
+	stwu	r5, 4(r6)
+	addis	r4, r4, 0x1000
+	cmpwi	r4, 0
+	bne	1b
+
+	/* Disable machine checks and critical exceptions */
+	mfmsr	r4
+	rlwinm	r4, r4, 0, ~MSR_CE
+	rlwinm	r4, r4, 0, ~MSR_ME
+	mtmsr	r4
+	isync
+
+#define TMP_VIRT_IMMR		0xf0000000
+#define DEFAULT_IMMR_VALUE	0xff400000
+#define IMMRBAR_BASE		0x0000
+
+	lis	r4, immrbase@ha
+	lwz	r4, immrbase@l(r4)
+
+	/* Use DBAT0 to address the current IMMR space */
+
+	ori	r4, r4, 0x002a
+	mtspr	SPRN_DBAT0L, r4
+	lis	r8, TMP_VIRT_IMMR@h
+	ori	r4, r8, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	mtspr	SPRN_DBAT0U, r4
+	isync
+
+	/* Use DBAT1 to address the original IMMR space */
+
+	lis	r4, DEFAULT_IMMR_VALUE@h
+	ori	r4, r4, 0x002a
+	mtspr	SPRN_DBAT1L, r4
+	lis	r9, (TMP_VIRT_IMMR + 0x01000000)@h
+	ori	r4, r9, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	mtspr	SPRN_DBAT1U, r4
+	isync
+
+	/* Use DBAT2 to address the beginning of RAM.  This isn't done
+	 * using the normal virtual mapping, because with page debugging
+	 * enabled it will be read-only.
+	 */
+
+	li	r4, 0x0002
+	mtspr	SPRN_DBAT2L, r4
+	lis	r4, KERNELBASE@h
+	ori	r4, r4, 0x001e	/* 1 MByte accessable from Kernel Space only */
+	mtspr	SPRN_DBAT2U, r4
+	isync
+
+	/* Flush the cache with our BAT, as there will be TLB misses
+	 * otherwise if page debugging is enabled, and these misses
+	 * will disturb the PLRU algorithm.
+	 */
+
+	bl	__flush_disable_L1
+
+	/* Keep the i-cache enabled, so the hack below for low-boot
+	 * flash will work.
+	 */
+	mfspr	r3, SPRN_HID0
+	ori	r3, r3, HID0_ICE
+	mtspr	SPRN_HID0, r3
+	isync
+
+	lis	r6, 0xf515
+	ori	r6, r6, 0x3ae5
+
+	lis	r7, mpc83xx_deep_resume@h
+	ori	r7, r7, mpc83xx_deep_resume@l
+	tophys(r7, r7)
+
+	lis	r5, KERNELBASE@h
+	stw	r6, 0(r5)
+	stw	r7, 4(r5)
+
+	/* Reset BARs */
+
+	li	r4, 0
+	stw	r4, 0x0024(r8)
+	stw	r4, 0x002c(r8)
+	stw	r4, 0x0034(r8)
+	stw	r4, 0x003c(r8)
+	stw	r4, 0x0064(r8)
+	stw	r4, 0x006c(r8)
+
+	/* Rev 1 of the 8313 has problems with wakeup events that are
+	 * pending during the transition to deep sleep state (such as if
+	 * the PCI host sets the state to D3 and then D0 in rapid
+	 * succession).  This check shrinks the race window somewhat.
+	 *
+	 * See erratum PCI23, though the problem is not limited
+	 * to PCI.
+	 */
+
+	lwz	r3, 0x0b04(r8)
+	andi.	r3, r3, 1
+	bne-	mpc83xx_deep_resume
+
+	/* Move IMMR back to the default location, following the
+	 * procedure specified in the MPC8313 manual.
+	 */
+	lwz	r4, IMMRBAR_BASE(r8)
+	isync
+	lis	r4, DEFAULT_IMMR_VALUE@h
+	stw	r4, IMMRBAR_BASE(r8)
+	lis	r4, KERNELBASE@h
+	lwz	r4, 0(r4)
+	isync
+	lwz	r4, IMMRBAR_BASE(r9)
+	mr	r8, r9
+	isync
+
+	/* Check the Reset Configuration Word to see whether flash needs
+	 * to be mapped at a low address or a high address.
+	 */
+
+	lwz	r4, 0x0904(r8)
+	andis.	r4, r4, 0x0400
+	li	r4, 0
+	beq	boot_low
+	lis	r4, 0xff80
+boot_low:
+	stw	r4, 0x0020(r8)
+	lis	r7, 0x8000
+	ori	r7, r7, 0x0016
+
+	mfspr	r5, SPRN_HID0
+	rlwinm	r5, r5, 0, ~(HID0_DOZE | HID0_NAP)
+	oris	r5, r5, HID0_SLEEP@h
+	mtspr	SPRN_HID0, r5
+	isync
+
+	mfmsr	r5
+	oris	r5, r5, MSR_POW@h
+
+	/* Enable the flash mapping at the appropriate address.  This
+	 * mapping will override the RAM mapping if booting low, so there's
+	 * no need to disable the latter.  This must be done inside the same
+	 * cache line as setting MSR_POW, so that no instruction fetches
+	 * from RAM happen after the flash mapping is turned on.
+	 */
+
+	.align	5
+	stw	r7, 0x0024(r8)
+	sync
+	isync
+	mtmsr	r5
+	isync
+1:	b	1b
+
+mpc83xx_deep_resume:
+	lis	r4, 1f@h
+	ori	r4, r4, 1f@l
+	tophys(r4, r4)
+	mtsrr0	r4
+
+	mfmsr	r4
+	rlwinm	r4, r4, 0, ~(MSR_IR | MSR_DR)
+	mtsrr1	r4
+
+	rfi
+
+1:	tlbia
+	bl	__inval_enable_L1
+
+	lis	r3, mpc83xx_sleep_save_area@h
+	ori	r3, r3, mpc83xx_sleep_save_area@l
+	tophys(r3, r3)
+
+	lwz	r5, SS_MEMSAVE+0(r3)
+	lwz	r6, SS_MEMSAVE+4(r3)
+
+	stw	r5, 0(0)
+	stw	r6, 4(0)
+
+	lwz	r5, SS_HID+0(r3)
+	lwz	r6, SS_HID+4(r3)
+	lwz	r7, SS_HID+8(r3)
+
+	mtspr	SPRN_HID0, r5
+	mtspr	SPRN_HID1, r6
+	mtspr	SPRN_HID2, r7
+
+	lwz	r4, SS_IABR+0(r3)
+	lwz	r5, SS_IABR+4(r3)
+	lwz	r6, SS_IBCR(r3)
+	lwz	r7, SS_DABR+0(r3)
+	lwz	r8, SS_DABR+4(r3)
+	lwz	r9, SS_DBCR(r3)
+
+	mtspr	SPRN_IABR, r4
+	mtspr	SPRN_IABR2, r5
+	mtspr	SPRN_IBCR, r6
+	mtspr	SPRN_DABR, r7
+	mtspr	SPRN_DABR2, r8
+	mtspr	SPRN_DBCR, r9
+
+	li	r4, 0
+	addi	r6, r3, SS_SR-4
+1:	lwzu	r5, 4(r6)
+	mtsrin	r5, r4
+	addis	r4, r4, 0x1000
+	cmpwi	r4, 0
+	bne	1b
+
+	lwz	r4, SS_DBAT+0x00(r3)
+	lwz	r5, SS_DBAT+0x04(r3)
+	lwz	r6, SS_DBAT+0x08(r3)
+	lwz	r7, SS_DBAT+0x0c(r3)
+
+	mtspr	SPRN_DBAT0U, r4
+	mtspr	SPRN_DBAT0L, r5
+	mtspr	SPRN_DBAT1U, r6
+	mtspr	SPRN_DBAT1L, r7
+
+	lwz	r4, SS_DBAT+0x10(r3)
+	lwz	r5, SS_DBAT+0x14(r3)
+	lwz	r6, SS_DBAT+0x18(r3)
+	lwz	r7, SS_DBAT+0x1c(r3)
+
+	mtspr	SPRN_DBAT2U, r4
+	mtspr	SPRN_DBAT2L, r5
+	mtspr	SPRN_DBAT3U, r6
+	mtspr	SPRN_DBAT3L, r7
+
+	lwz	r4, SS_DBAT+0x20(r3)
+	lwz	r5, SS_DBAT+0x24(r3)
+	lwz	r6, SS_DBAT+0x28(r3)
+	lwz	r7, SS_DBAT+0x2c(r3)
+
+	mtspr	SPRN_DBAT4U, r4
+	mtspr	SPRN_DBAT4L, r5
+	mtspr	SPRN_DBAT5U, r6
+	mtspr	SPRN_DBAT5L, r7
+
+	lwz	r4, SS_DBAT+0x30(r3)
+	lwz	r5, SS_DBAT+0x34(r3)
+	lwz	r6, SS_DBAT+0x38(r3)
+	lwz	r7, SS_DBAT+0x3c(r3)
+
+	mtspr	SPRN_DBAT6U, r4
+	mtspr	SPRN_DBAT6L, r5
+	mtspr	SPRN_DBAT7U, r6
+	mtspr	SPRN_DBAT7L, r7
+
+	lwz	r4, SS_IBAT+0x00(r3)
+	lwz	r5, SS_IBAT+0x04(r3)
+	lwz	r6, SS_IBAT+0x08(r3)
+	lwz	r7, SS_IBAT+0x0c(r3)
+
+	mtspr	SPRN_IBAT0U, r4
+	mtspr	SPRN_IBAT0L, r5
+	mtspr	SPRN_IBAT1U, r6
+	mtspr	SPRN_IBAT1L, r7
+
+	lwz	r4, SS_IBAT+0x10(r3)
+	lwz	r5, SS_IBAT+0x14(r3)
+	lwz	r6, SS_IBAT+0x18(r3)
+	lwz	r7, SS_IBAT+0x1c(r3)
+
+	mtspr	SPRN_IBAT2U, r4
+	mtspr	SPRN_IBAT2L, r5
+	mtspr	SPRN_IBAT3U, r6
+	mtspr	SPRN_IBAT3L, r7
+
+	lwz	r4, SS_IBAT+0x20(r3)
+	lwz	r5, SS_IBAT+0x24(r3)
+	lwz	r6, SS_IBAT+0x28(r3)
+	lwz	r7, SS_IBAT+0x2c(r3)
+
+	mtspr	SPRN_IBAT4U, r4
+	mtspr	SPRN_IBAT4L, r5
+	mtspr	SPRN_IBAT5U, r6
+	mtspr	SPRN_IBAT5L, r7
+
+	lwz	r4, SS_IBAT+0x30(r3)
+	lwz	r5, SS_IBAT+0x34(r3)
+	lwz	r6, SS_IBAT+0x38(r3)
+	lwz	r7, SS_IBAT+0x3c(r3)
+
+	mtspr	SPRN_IBAT6U, r4
+	mtspr	SPRN_IBAT6L, r5
+	mtspr	SPRN_IBAT7U, r6
+	mtspr	SPRN_IBAT7L, r7
+
+	lwz	r4, SS_SPRG+0(r3)
+	lwz	r5, SS_SPRG+4(r3)
+	lwz	r6, SS_SPRG+8(r3)
+	lwz	r7, SS_SPRG+12(r3)
+	lwz	r8, SS_SDR1(r3)
+
+	mtspr	SPRN_SPRG0, r4
+	mtspr	SPRN_SPRG1, r5
+	mtspr	SPRN_SPRG2, r6
+	mtspr	SPRN_SPRG3, r7
+	mtsdr1	r8
+
+	lwz	r4, SS_MSR(r3)
+	lwz	r5, SS_LR(r3)
+	lwz	r6, SS_CR(r3)
+	lwz	r1, SS_SP(r3)
+	lwz	r2, SS_R2(r3)
+
+	mtsrr1	r4
+	mtsrr0	r5
+	mtcr	r6
+
+	li	r4, 0
+	mtspr	SPRN_TBWL, r4
+
+	lwz	r4, SS_TB+0(r3)
+	lwz	r5, SS_TB+4(r3)
+
+	mtspr	SPRN_TBWU, r4
+	mtspr	SPRN_TBWL, r5
+
+	lmw	r12, SS_GPREG(r3)
+
+	/* Kick decrementer */
+	li	r0, 1
+	mtdec	r0
+
+	rfi
diff --git a/arch/powerpc/platforms/83xx/suspend.c b/arch/powerpc/platforms/83xx/suspend.c
new file mode 100644
index 000000000000..08e65fc8b98c
--- /dev/null
+++ b/arch/powerpc/platforms/83xx/suspend.c
@@ -0,0 +1,388 @@
+/*
+ * MPC83xx suspend support
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <linux/types.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/suspend.h>
+#include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
+
+#include <asm/reg.h>
+#include <asm/io.h>
+#include <asm/time.h>
+#include <asm/mpc6xx.h>
+
+#include <sysdev/fsl_soc.h>
+
+#define PMCCR1_NEXT_STATE       0x0C /* Next state for power management */
+#define PMCCR1_NEXT_STATE_SHIFT 2
+#define PMCCR1_CURR_STATE       0x03 /* Current state for power management*/
+#define IMMR_RCW_OFFSET         0x900
+#define RCW_PCI_HOST            0x80000000
+
+void mpc83xx_enter_deep_sleep(phys_addr_t immrbase);
+
+struct mpc83xx_pmc {
+	u32 config;
+#define PMCCR_DLPEN 2 /* DDR SDRAM low power enable */
+#define PMCCR_SLPEN 1 /* System low power enable */
+
+	u32 event;
+	u32 mask;
+/* All but PMCI are deep-sleep only */
+#define PMCER_GPIO   0x100
+#define PMCER_PCI    0x080
+#define PMCER_USB    0x040
+#define PMCER_ETSEC1 0x020
+#define PMCER_ETSEC2 0x010
+#define PMCER_TIMER  0x008
+#define PMCER_INT1   0x004
+#define PMCER_INT2   0x002
+#define PMCER_PMCI   0x001
+#define PMCER_ALL    0x1FF
+
+	/* deep-sleep only */
+	u32 config1;
+#define PMCCR1_USE_STATE  0x80000000
+#define PMCCR1_PME_EN     0x00000080
+#define PMCCR1_ASSERT_PME 0x00000040
+#define PMCCR1_POWER_OFF  0x00000020
+
+	/* deep-sleep only */
+	u32 config2;
+};
+
+struct mpc83xx_rcw {
+	u32 rcwlr;
+	u32 rcwhr;
+};
+
+struct mpc83xx_clock {
+	u32 spmr;
+	u32 occr;
+	u32 sccr;
+};
+
+struct pmc_type {
+	int has_deep_sleep;
+};
+
+static struct of_device *pmc_dev;
+static int has_deep_sleep, deep_sleeping;
+static int pmc_irq;
+static struct mpc83xx_pmc __iomem *pmc_regs;
+static struct mpc83xx_clock __iomem *clock_regs;
+static int is_pci_agent, wake_from_pci;
+static phys_addr_t immrbase;
+static int pci_pm_state;
+static DECLARE_WAIT_QUEUE_HEAD(agent_wq);
+
+int fsl_deep_sleep(void)
+{
+	return deep_sleeping;
+}
+
+static int mpc83xx_change_state(void)
+{
+	u32 curr_state;
+	u32 reg_cfg1 = in_be32(&pmc_regs->config1);
+
+	if (is_pci_agent) {
+		pci_pm_state = (reg_cfg1 & PMCCR1_NEXT_STATE) >>
+		               PMCCR1_NEXT_STATE_SHIFT;
+		curr_state = reg_cfg1 & PMCCR1_CURR_STATE;
+
+		if (curr_state != pci_pm_state) {
+			reg_cfg1 &= ~PMCCR1_CURR_STATE;
+			reg_cfg1 |= pci_pm_state;
+			out_be32(&pmc_regs->config1, reg_cfg1);
+
+			wake_up(&agent_wq);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+static irqreturn_t pmc_irq_handler(int irq, void *dev_id)
+{
+	u32 event = in_be32(&pmc_regs->event);
+	int ret = IRQ_NONE;
+
+	if (mpc83xx_change_state())
+		ret = IRQ_HANDLED;
+
+	if (event) {
+		out_be32(&pmc_regs->event, event);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static int mpc83xx_suspend_enter(suspend_state_t state)
+{
+	int ret = -EAGAIN;
+
+	/* Don't go to sleep if there's a race where pci_pm_state changes
+	 * between the agent thread checking it and the PM code disabling
+	 * interrupts.
+	 */
+	if (wake_from_pci) {
+		if (pci_pm_state != (deep_sleeping ? 3 : 2))
+			goto out;
+
+		out_be32(&pmc_regs->config1,
+		         in_be32(&pmc_regs->config1) | PMCCR1_PME_EN);
+	}
+
+	/* Put the system into low-power mode and the RAM
+	 * into self-refresh mode once the core goes to
+	 * sleep.
+	 */
+
+	out_be32(&pmc_regs->config, PMCCR_SLPEN | PMCCR_DLPEN);
+
+	/* If it has deep sleep (i.e. it's an 831x or compatible),
+	 * disable power to the core upon entering sleep mode.  This will
+	 * require going through the boot firmware upon a wakeup event.
+	 */
+
+	if (deep_sleeping) {
+		out_be32(&pmc_regs->mask, PMCER_ALL);
+
+		out_be32(&pmc_regs->config1,
+		         in_be32(&pmc_regs->config1) | PMCCR1_POWER_OFF);
+
+		enable_kernel_fp();
+
+		mpc83xx_enter_deep_sleep(immrbase);
+
+		out_be32(&pmc_regs->config1,
+		         in_be32(&pmc_regs->config1) & ~PMCCR1_POWER_OFF);
+
+		out_be32(&pmc_regs->mask, PMCER_PMCI);
+	} else {
+		out_be32(&pmc_regs->mask, PMCER_PMCI);
+
+		mpc6xx_enter_standby();
+	}
+
+	ret = 0;
+
+out:
+	out_be32(&pmc_regs->config1,
+	         in_be32(&pmc_regs->config1) & ~PMCCR1_PME_EN);
+
+	return ret;
+}
+
+static void mpc83xx_suspend_finish(void)
+{
+	deep_sleeping = 0;
+}
+
+static int mpc83xx_suspend_valid(suspend_state_t state)
+{
+	return state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM;
+}
+
+static int mpc83xx_suspend_begin(suspend_state_t state)
+{
+	switch (state) {
+		case PM_SUSPEND_STANDBY:
+			deep_sleeping = 0;
+			return 0;
+
+		case PM_SUSPEND_MEM:
+			if (has_deep_sleep)
+				deep_sleeping = 1;
+
+			return 0;
+
+		default:
+			return -EINVAL;
+	}
+}
+
+static int agent_thread_fn(void *data)
+{
+	while (1) {
+		wait_event_interruptible(agent_wq, pci_pm_state >= 2);
+		try_to_freeze();
+
+		if (signal_pending(current) || pci_pm_state < 2)
+			continue;
+
+		/* With a preemptible kernel (or SMP), this could race with
+		 * a userspace-driven suspend request.  It's probably best
+		 * to avoid mixing the two with such a configuration (or
+		 * else fix it by adding a mutex to state_store that we can
+		 * synchronize with).
+		 */
+
+		wake_from_pci = 1;
+
+		pm_suspend(pci_pm_state == 3 ? PM_SUSPEND_MEM :
+		                               PM_SUSPEND_STANDBY);
+
+		wake_from_pci = 0;
+	}
+
+	return 0;
+}
+
+static void mpc83xx_set_agent(void)
+{
+	out_be32(&pmc_regs->config1, PMCCR1_USE_STATE);
+	out_be32(&pmc_regs->mask, PMCER_PMCI);
+
+	kthread_run(agent_thread_fn, NULL, "PCI power mgt");
+}
+
+static int mpc83xx_is_pci_agent(void)
+{
+	struct mpc83xx_rcw __iomem *rcw_regs;
+	int ret;
+
+	rcw_regs = ioremap(get_immrbase() + IMMR_RCW_OFFSET,
+	                   sizeof(struct mpc83xx_rcw));
+
+	if (!rcw_regs)
+		return -ENOMEM;
+
+	ret = !(in_be32(&rcw_regs->rcwhr) & RCW_PCI_HOST);
+
+	iounmap(rcw_regs);
+	return ret;
+}
+
+static struct platform_suspend_ops mpc83xx_suspend_ops = {
+	.valid = mpc83xx_suspend_valid,
+	.begin = mpc83xx_suspend_begin,
+	.enter = mpc83xx_suspend_enter,
+	.finish = mpc83xx_suspend_finish,
+};
+
+static int pmc_probe(struct of_device *ofdev,
+                     const struct of_device_id *match)
+{
+	struct device_node *np = ofdev->node;
+	struct resource res;
+	struct pmc_type *type = match->data;
+	int ret = 0;
+
+	if (!of_device_is_available(np))
+		return -ENODEV;
+
+	has_deep_sleep = type->has_deep_sleep;
+	immrbase = get_immrbase();
+	pmc_dev = ofdev;
+
+	is_pci_agent = mpc83xx_is_pci_agent();
+	if (is_pci_agent < 0)
+		return is_pci_agent;
+
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		return -ENODEV;
+
+	pmc_irq = irq_of_parse_and_map(np, 0);
+	if (pmc_irq != NO_IRQ) {
+		ret = request_irq(pmc_irq, pmc_irq_handler, IRQF_SHARED,
+		                  "pmc", ofdev);
+
+		if (ret)
+			return -EBUSY;
+	}
+
+	pmc_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc));
+
+	if (!pmc_regs) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = of_address_to_resource(np, 1, &res);
+	if (ret) {
+		ret = -ENODEV;
+		goto out_pmc;
+	}
+
+	clock_regs = ioremap(res.start, sizeof(struct mpc83xx_pmc));
+
+	if (!clock_regs) {
+		ret = -ENOMEM;
+		goto out_pmc;
+	}
+
+	if (is_pci_agent)
+		mpc83xx_set_agent();
+
+	suspend_set_ops(&mpc83xx_suspend_ops);
+	return 0;
+
+out_pmc:
+	iounmap(pmc_regs);
+out:
+	if (pmc_irq != NO_IRQ)
+		free_irq(pmc_irq, ofdev);
+
+	return ret;
+}
+
+static int pmc_remove(struct of_device *ofdev)
+{
+	return -EPERM;
+};
+
+static struct pmc_type pmc_types[] = {
+	{
+		.has_deep_sleep = 1,
+	},
+	{
+		.has_deep_sleep = 0,
+	}
+};
+
+static struct of_device_id pmc_match[] = {
+	{
+		.compatible = "fsl,mpc8313-pmc",
+		.data = &pmc_types[0],
+	},
+	{
+		.compatible = "fsl,mpc8349-pmc",
+		.data = &pmc_types[1],
+	},
+	{}
+};
+
+static struct of_platform_driver pmc_driver = {
+	.name = "mpc83xx-pmc",
+	.match_table = pmc_match,
+	.probe = pmc_probe,
+	.remove = pmc_remove
+};
+
+static int pmc_init(void)
+{
+	return of_register_platform_driver(&pmc_driver);
+}
+
+module_init(pmc_init);
diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c
index 64bcf0a33c71..cc99c280aad9 100644
--- a/arch/powerpc/platforms/83xx/usb.c
+++ b/arch/powerpc/platforms/83xx/usb.c
@@ -137,15 +137,21 @@ int mpc831x_usb_cfg(void)
 
 	/* Configure pin mux for ULPI.  There is no pin mux for UTMI */
 	if (prop && !strcmp(prop, "ulpi")) {
-		temp = in_be32(immap + MPC83XX_SICRL_OFFS);
-		temp &= ~MPC831X_SICRL_USB_MASK;
-		temp |= MPC831X_SICRL_USB_ULPI;
-		out_be32(immap + MPC83XX_SICRL_OFFS, temp);
-
-		temp = in_be32(immap + MPC83XX_SICRH_OFFS);
-		temp &= ~MPC831X_SICRH_USB_MASK;
-		temp |= MPC831X_SICRH_USB_ULPI;
-		out_be32(immap + MPC83XX_SICRH_OFFS, temp);
+		if (of_device_is_compatible(immr_node, "fsl,mpc8315-immr")) {
+			clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+					MPC8315_SICRL_USB_MASK,
+					MPC8315_SICRL_USB_ULPI);
+			clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+					MPC8315_SICRH_USB_MASK,
+					MPC8315_SICRH_USB_ULPI);
+		} else {
+			clrsetbits_be32(immap + MPC83XX_SICRL_OFFS,
+					MPC831X_SICRL_USB_MASK,
+					MPC831X_SICRL_USB_ULPI);
+			clrsetbits_be32(immap + MPC83XX_SICRH_OFFS,
+					MPC831X_SICRH_USB_MASK,
+					MPC831X_SICRH_USB_ULPI);
+		}
 	}
 
 	iounmap(immap);
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index ecbe580c3f32..291675b0097a 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -2,8 +2,8 @@ menuconfig MPC85xx
 	bool "Machine Type"
 	depends on PPC_85xx
 	select PPC_UDBG_16550
-	select PPC_INDIRECT_PCI if PCI
 	select MPIC
+	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select SERIAL_8250_SHARE_IRQ if SERIAL_8250
 	default y
@@ -38,6 +38,12 @@ config MPC85xx_MDS
 	help
 	  This option enables support for the MPC85xx MDS board
 
+config MPC8536_DS
+	bool "Freescale MPC8536 DS"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the MPC8536 DS board
+
 config MPC85xx_DS
 	bool "Freescale MPC85xx DS"
 	select PPC_I8259
@@ -75,6 +81,13 @@ config TQM8541
 	select TQM85xx
 	select CPM2
 
+config TQM8548
+	bool "TQ Components TQM8548"
+	help
+	  This option enables support for the TQ Components TQM8548 board.
+	select DEFAULT_UIMAGE
+	select TQM85xx
+
 config TQM8555
 	bool "TQ Components TQM8555"
 	help
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 6cea185f62b2..cb3054e1001d 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -4,6 +4,7 @@
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
 obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
+obj-$(CONFIG_MPC8536_DS)  += mpc8536_ds.o
 obj-$(CONFIG_MPC85xx_DS)  += mpc85xx_ds.o
 obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c
index 2145adeb220c..8a3b117b6ce2 100644
--- a/arch/powerpc/platforms/85xx/ksi8560.c
+++ b/arch/powerpc/platforms/85xx/ksi8560.c
@@ -222,6 +222,7 @@ static void ksi8560_show_cpuinfo(struct seq_file *m)
 
 static struct of_device_id __initdata of_bus_ids[] = {
 	{ .type = "soc", },
+	{ .type = "simple-bus", },
 	{ .name = "cpm", },
 	{ .name = "localbus", },
 	{},
diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c
new file mode 100644
index 000000000000..1bf5aefdfeb1
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c
@@ -0,0 +1,126 @@
+/*
+ * MPC8536 DS Board Setup
+ *
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <mm/mmu_decl.h>
+#include <asm/prom.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+void __init mpc8536_ds_pic_init(void)
+{
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (np == NULL) {
+		printk(KERN_ERR "Could not find open-pic node\n");
+		return;
+	}
+
+	if (of_address_to_resource(np, 0, &r)) {
+		printk(KERN_ERR "Failed to map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	mpic = mpic_alloc(np, r.start,
+			  MPIC_PRIMARY | MPIC_WANTS_RESET |
+			  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
+			0, 256, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+	of_node_put(np);
+
+	mpic_init(mpic);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init mpc8536_ds_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("mpc8536_ds_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_node_by_type(np, "pci") {
+		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
+			struct resource rsrc;
+			of_address_to_resource(np, 0, &rsrc);
+			if ((rsrc.start & 0xfffff) == 0x8000)
+				fsl_add_bridge(np, 1);
+			else
+				fsl_add_bridge(np, 0);
+		}
+	}
+
+#endif
+
+	printk("MPC8536 DS board from Freescale Semiconductor\n");
+}
+
+static struct of_device_id __initdata mpc8536_ds_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init mpc8536_ds_publish_devices(void)
+{
+	return of_platform_bus_probe(NULL, mpc8536_ds_ids, NULL);
+}
+machine_device_initcall(mpc8536_ds, mpc8536_ds_publish_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc8536_ds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,mpc8536ds");
+}
+
+define_machine(mpc8536_ds) {
+	.name			= "MPC8536 DS",
+	.probe			= mpc8536_ds_probe,
+	.setup_arch		= mpc8536_ds_setup_arch,
+	.init_IRQ		= mpc8536_ds_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 3582c841844b..d17807a6b89a 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -119,6 +119,8 @@ static const struct cpm_pin mpc8560_ads_pins[] = {
 	{3, 31, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 
 	/* SCC2 */
+	{2, 12, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+	{2, 13, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 	{3, 26, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{3, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{3, 28, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
@@ -145,7 +147,6 @@ static const struct cpm_pin mpc8560_ads_pins[] = {
 	{1, 4, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{1, 5, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{1, 6, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
-	{1, 7, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{1, 8, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 	{1, 9, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 	{1, 10, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
@@ -156,8 +157,9 @@ static const struct cpm_pin mpc8560_ads_pins[] = {
 	{1, 15, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 	{1, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
 	{1, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
-	{2, 16, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK16 */
-	{2, 17, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* CLK15 */
+	{2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK16 */
+	{2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY}, /* CLK15 */
+	{2, 27, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
 };
 
 static void __init init_ioports(void)
@@ -228,6 +230,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
 	{ .type = "soc", },
 	{ .name = "cpm", },
 	{ .name = "localbus", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
index 8b1de7884be6..50d7ea8f922b 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c
@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/fsl_devices.h>
+#include <linux/of_platform.h>
 
 #include <asm/system.h>
 #include <asm/pgtable.h>
@@ -335,6 +336,19 @@ static int __init mpc85xx_cds_probe(void)
         return of_flat_dt_is_compatible(root, "MPC85xxCDS");
 }
 
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .type = "soc", },
+	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	return of_platform_bus_probe(NULL, of_bus_ids, NULL);
+}
+machine_device_initcall(mpc85xx_cds, declare_of_platform_devices);
+
 define_machine(mpc85xx_cds) {
 	.name		= "MPC85xx CDS",
 	.probe		= mpc85xx_cds_probe,
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index dfd8b4ad9b28..483b65cbabae 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -58,14 +58,13 @@ void __init mpc85xx_ds_pic_init(void)
 {
 	struct mpic *mpic;
 	struct resource r;
-	struct device_node *np = NULL;
+	struct device_node *np;
 #ifdef CONFIG_PPC_I8259
 	struct device_node *cascade_node = NULL;
 	int cascade_irq;
 #endif
 
-	np = of_find_node_by_type(np, "open-pic");
-
+	np = of_find_node_by_type(NULL, "open-pic");
 	if (np == NULL) {
 		printk(KERN_ERR "Could not find open-pic node\n");
 		return;
@@ -78,9 +77,11 @@ void __init mpc85xx_ds_pic_init(void)
 	}
 
 	mpic = mpic_alloc(np, r.start,
-			  MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			  MPIC_PRIMARY | MPIC_WANTS_RESET |
+			  MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
 			0, 256, " OpenPIC  ");
 	BUG_ON(mpic == NULL);
+	of_node_put(np);
 
 	mpic_init(mpic);
 
@@ -114,7 +115,6 @@ void __init mpc85xx_ds_pic_init(void)
 
 #ifdef CONFIG_PCI
 static int primary_phb_addr;
-extern int uses_fsl_uli_m1575;
 extern int uli_exclude_device(struct pci_controller *hose,
 				u_char bus, u_char devfn);
 
@@ -160,7 +160,6 @@ static void __init mpc85xx_ds_setup_arch(void)
 		}
 	}
 
-	uses_fsl_uli_m1575 = 1;
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 
@@ -184,9 +183,10 @@ static int __init mpc8544_ds_probe(void)
 	}
 }
 
-static struct of_device_id mpc85xxds_ids[] = {
+static struct of_device_id __initdata mpc85xxds_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
@@ -195,6 +195,7 @@ static int __init mpc85xxds_publish_devices(void)
 	return of_platform_bus_probe(NULL, mpc85xxds_ids, NULL);
 }
 machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
+machine_device_initcall(mpc8572_ds, mpc85xxds_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 43a459f63e31..2494c5155919 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -260,6 +260,7 @@ machine_arch_initcall(mpc85xx_mds, board_fixups);
 static struct of_device_id mpc85xx_ids[] = {
 	{ .type = "soc", },
 	{ .compatible = "soc", },
+	{ .compatible = "simple-bus", },
 	{ .type = "qe", },
 	{ .compatible = "fsl,qe", },
 	{},
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c
index 2c580cd24e4f..6509ade71668 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -217,6 +217,7 @@ static struct of_device_id __initdata of_bus_ids[] = {
 	{ .type = "soc", },
 	{ .name = "cpm", },
 	{ .name = "localbus", },
+	{ .compatible = "simple-bus", },
 	{},
 };
 
diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c
index 77681acf1bae..d850880d6964 100644
--- a/arch/powerpc/platforms/85xx/tqm85xx.c
+++ b/arch/powerpc/platforms/85xx/tqm85xx.c
@@ -120,8 +120,18 @@ static void __init tqm85xx_setup_arch(void)
 #endif
 
 #ifdef CONFIG_PCI
-	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
-		fsl_add_bridge(np, 1);
+	for_each_node_by_type(np, "pci") {
+		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
+		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
+			struct resource rsrc;
+			if (!of_address_to_resource(np, 0, &rsrc)) {
+				if ((rsrc.start & 0xfffff) == 0x8000)
+					fsl_add_bridge(np, 1);
+				else
+					fsl_add_bridge(np, 0);
+			}
+		}
+	}
 #endif
 }
 
@@ -165,10 +175,11 @@ static int __init tqm85xx_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
 
-	if ((of_flat_dt_is_compatible(root, "tqm,8540")) ||
-	    (of_flat_dt_is_compatible(root, "tqm,8541")) ||
-	    (of_flat_dt_is_compatible(root, "tqm,8555")) ||
-	    (of_flat_dt_is_compatible(root, "tqm,8560")))
+	if ((of_flat_dt_is_compatible(root, "tqc,tqm8540")) ||
+	    (of_flat_dt_is_compatible(root, "tqc,tqm8541")) ||
+	    (of_flat_dt_is_compatible(root, "tqc,tqm8548")) ||
+	    (of_flat_dt_is_compatible(root, "tqc,tqm8555")) ||
+	    (of_flat_dt_is_compatible(root, "tqc,tqm8560")))
 		return 1;
 
 	return 0;
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 053f49a1dcae..9355a5269431 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -1,7 +1,13 @@
-choice
-	prompt "86xx Board Type"
-	depends on PPC_86xx
-	default MPC8641_HPCN
+config PPC_86xx
+menuconfig PPC_86xx
+	bool "86xx-based boards"
+	depends on 6xx && PPC_MULTIPLATFORM
+	select FSL_SOC
+	select ALTIVEC
+	help
+	  The Freescale E600 SoCs have 74xx cores.
+
+if PPC_86xx
 
 config MPC8641_HPCN
 	bool "Freescale MPC8641 HPCN"
@@ -21,13 +27,15 @@ config SBC8641D
 config MPC8610_HPCD
 	bool "Freescale MPC8610 HPCD"
 	select DEFAULT_UIMAGE
+	select FSL_ULI1575
 	help
 	  This option enables support for the MPC8610 HPCD board.
 
-endchoice
+endif
 
 config MPC8641
 	bool
+	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
@@ -35,6 +43,7 @@ config MPC8641
 
 config MPC8610
 	bool
+	select PPC_PCI_CHOICE
 	select FSL_PCI if PCI
 	select PPC_UDBG_16550
 	select MPIC
diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile
index 1b9b4a9b2525..8fee37dec795 100644
--- a/arch/powerpc/platforms/86xx/Makefile
+++ b/arch/powerpc/platforms/86xx/Makefile
@@ -2,6 +2,7 @@
 # Makefile for the PowerPC 86xx linux kernel.
 #
 
+obj-y				:= pic.o
 obj-$(CONFIG_SMP)		+= mpc86xx_smp.o
 obj-$(CONFIG_MPC8641_HPCN)	+= mpc86xx_hpcn.o
 obj-$(CONFIG_SBC8641D)		+= sbc8641d.o
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index dea13208bf64..5eedb710896e 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -39,6 +39,8 @@
 #include <sysdev/fsl_pci.h>
 #include <sysdev/fsl_soc.h>
 
+#include "mpc86xx.h"
+
 static unsigned char *pixis_bdcfg0, *pixis_arch;
 
 static struct of_device_id __initdata mpc8610_ids[] = {
@@ -56,114 +58,6 @@ static int __init mpc8610_declare_of_platform_devices(void)
 }
 machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices);
 
-static void __init mpc86xx_hpcd_init_irq(void)
-{
-	struct mpic *mpic1;
-	struct device_node *np;
-	struct resource res;
-
-	/* Determine PIC address. */
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL)
-		return;
-	of_address_to_resource(np, 0, &res);
-
-	/* Alloc mpic structure and per isu has 16 INT entries. */
-	mpic1 = mpic_alloc(np, res.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
-			0, 256, " MPIC     ");
-	BUG_ON(mpic1 == NULL);
-
-	mpic_init(mpic1);
-}
-
-#ifdef CONFIG_PCI
-static void __devinit quirk_uli1575(struct pci_dev *dev)
-{
-	u32 temp32;
-
-	/* Disable INTx */
-	pci_read_config_dword(dev, 0x48, &temp32);
-	pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
-
-	/* Enable sideband interrupt */
-	pci_read_config_dword(dev, 0x90, &temp32);
-	pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
-}
-
-static void __devinit quirk_uli5288(struct pci_dev *dev)
-{
-	unsigned char c;
-	unsigned short temp;
-
-	/* Interrupt Disable, Needed when SATA disabled */
-	pci_read_config_word(dev, PCI_COMMAND, &temp);
-	temp |= 1<<10;
-	pci_write_config_word(dev, PCI_COMMAND, temp);
-
-	pci_read_config_byte(dev, 0x83, &c);
-	c |= 0x80;
-	pci_write_config_byte(dev, 0x83, c);
-
-	pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
-	pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
-
-	pci_read_config_byte(dev, 0x83, &c);
-	c &= 0x7f;
-	pci_write_config_byte(dev, 0x83, c);
-}
-
-/*
- * Since 8259PIC was disabled on the board, the IDE device can not
- * use the legacy IRQ, we need to let the IDE device work under
- * native mode and use the interrupt line like other PCI devices.
- * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
- * as the interrupt for IDE device.
- */
-static void __devinit quirk_uli5229(struct pci_dev *dev)
-{
-	unsigned char c;
-
-	pci_read_config_byte(dev, 0x4b, &c);
-	c |= 0x10;
-	pci_write_config_byte(dev, 0x4b, c);
-}
-
-/*
- * SATA interrupt pin bug fix
- * There's a chip bug for 5288, The interrupt pin should be 2,
- * not the read only value 1, So it use INTB#, not INTA# which
- * actually used by the IDE device 5229.
- * As of this bug, during the PCI initialization, 5288 read the
- * irq of IDE device from the device tree, this function fix this
- * bug by re-assigning a correct irq to 5288.
- *
- */
-static void __devinit final_uli5288(struct pci_dev *dev)
-{
-	struct pci_controller *hose = pci_bus_to_host(dev->bus);
-	struct device_node *hosenode = hose ? hose->dn : NULL;
-	struct of_irq oirq;
-	int virq, pin = 2;
-	u32 laddr[3];
-
-	if (!hosenode)
-		return;
-
-	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
-	laddr[1] = laddr[2] = 0;
-	of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
-	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
-				     oirq.size);
-	dev->irq = virq;
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288);
-#endif /* CONFIG_PCI */
-
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 
 static u32 get_busfreq(void)
@@ -404,7 +298,7 @@ define_machine(mpc86xx_hpcd) {
 	.name			= "MPC86xx HPCD",
 	.probe			= mpc86xx_hpcd_probe,
 	.setup_arch		= mpc86xx_hpcd_setup_arch,
-	.init_IRQ		= mpc86xx_hpcd_init_irq,
+	.init_IRQ		= mpc86xx_init_irq,
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
 	.time_init		= mpc86xx_time_init,
diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h
index 525ffa1904f9..08efb57559d1 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx.h
+++ b/arch/powerpc/platforms/86xx/mpc86xx.h
@@ -15,6 +15,7 @@
  * mpc86xx_* files. Mostly for use by mpc86xx_setup().
  */
 
-extern void __init mpc86xx_smp_init(void);
+extern void mpc86xx_smp_init(void);
+extern void mpc86xx_init_irq(void);
 
 #endif	/* __MPC86XX_H__ */
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index f13704aabbea..f712d9c0991b 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -28,7 +28,6 @@
 #include <asm/prom.h>
 #include <mm/mmu_decl.h>
 #include <asm/udbg.h>
-#include <asm/i8259.h>
 
 #include <asm/mpic.h>
 
@@ -46,68 +45,6 @@
 #endif
 
 #ifdef CONFIG_PCI
-static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned int cascade_irq = i8259_irq();
-	if (cascade_irq != NO_IRQ)
-		generic_handle_irq(cascade_irq);
-	desc->chip->eoi(irq);
-}
-#endif	/* CONFIG_PCI */
-
-static void __init
-mpc86xx_hpcn_init_irq(void)
-{
-	struct mpic *mpic1;
-	struct device_node *np;
-	struct resource res;
-#ifdef CONFIG_PCI
-	struct device_node *cascade_node = NULL;
-	int cascade_irq;
-#endif
-
-	/* Determine PIC address. */
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL)
-		return;
-	of_address_to_resource(np, 0, &res);
-
-	/* Alloc mpic structure and per isu has 16 INT entries. */
-	mpic1 = mpic_alloc(np, res.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
-			0, 256, " MPIC     ");
-	BUG_ON(mpic1 == NULL);
-
-	mpic_init(mpic1);
-
-#ifdef CONFIG_PCI
-	/* Initialize i8259 controller */
-	for_each_node_by_type(np, "interrupt-controller")
-		if (of_device_is_compatible(np, "chrp,iic")) {
-			cascade_node = np;
-			break;
-		}
-	if (cascade_node == NULL) {
-		printk(KERN_DEBUG "mpc86xxhpcn: no ISA interrupt controller\n");
-		return;
-	}
-
-	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
-	if (cascade_irq == NO_IRQ) {
-		printk(KERN_ERR "mpc86xxhpcn: failed to map cascade interrupt");
-		return;
-	}
-	DBG("mpc86xxhpcn: cascade mapped to irq %d\n", cascade_irq);
-
-	i8259_init(cascade_node, 0);
-	of_node_put(cascade_node);
-
-	set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade);
-#endif
-}
-
-#ifdef CONFIG_PCI
-extern int uses_fsl_uli_m1575;
 extern int uli_exclude_device(struct pci_controller *hose,
 				u_char bus, u_char devfn);
 
@@ -149,7 +86,6 @@ mpc86xx_hpcn_setup_arch(void)
 			fsl_add_bridge(np, 0);
 	}
 
-	uses_fsl_uli_m1575 = 1;
 	ppc_md.pci_exclude_device = mpc86xx_exclude_device;
 
 #endif
@@ -237,7 +173,7 @@ define_machine(mpc86xx_hpcn) {
 	.name			= "MPC86xx HPCN",
 	.probe			= mpc86xx_hpcn_probe,
 	.setup_arch		= mpc86xx_hpcn_setup_arch,
-	.init_IRQ		= mpc86xx_hpcn_init_irq,
+	.init_IRQ		= mpc86xx_init_irq,
 	.show_cpuinfo		= mpc86xx_hpcn_show_cpuinfo,
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
index ba55b0ff0f74..014e26cda08d 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_smp.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c
@@ -15,10 +15,11 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 
+#include <asm/code-patching.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/pci-bridge.h>
-#include <asm-powerpc/mpic.h>
+#include <asm/mpic.h>
 #include <asm/mpc86xx.h>
 #include <asm/cacheflush.h>
 
@@ -56,8 +57,7 @@ smp_86xx_kick_cpu(int nr)
 	unsigned int save_vector;
 	unsigned long target, flags;
 	int n = 0;
-	volatile unsigned int *vector
-		 = (volatile unsigned int *)(KERNELBASE + 0x100);
+	unsigned int *vector = (unsigned int *)(KERNELBASE + 0x100);
 
 	if (nr < 0 || nr >= NR_CPUS)
 		return;
@@ -71,7 +71,7 @@ smp_86xx_kick_cpu(int nr)
 
 	/* Setup fake reset vector to call __secondary_start_mpc86xx. */
 	target = (unsigned long) __secondary_start_mpc86xx;
-	create_branch((unsigned long)vector, target, BRANCH_SET_LINK);
+	patch_branch(vector, target, BRANCH_SET_LINK);
 
 	/* Kick that CPU */
 	smp_86xx_release_core(nr);
diff --git a/arch/powerpc/platforms/86xx/pic.c b/arch/powerpc/platforms/86xx/pic.c
new file mode 100644
index 000000000000..8881c5de500d
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/pic.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/mpic.h>
+#include <asm/i8259.h>
+
+#ifdef CONFIG_PPC_I8259
+static void mpc86xx_8259_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int cascade_irq = i8259_irq();
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+	desc->chip->eoi(irq);
+}
+#endif	/* CONFIG_PPC_I8259 */
+
+void __init mpc86xx_init_irq(void)
+{
+	struct mpic *mpic;
+	struct device_node *np;
+	struct resource res;
+#ifdef CONFIG_PPC_I8259
+	struct device_node *cascade_node = NULL;
+	int cascade_irq;
+#endif
+
+	/* Determine PIC address. */
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (np == NULL)
+		return;
+	of_address_to_resource(np, 0, &res);
+
+	mpic = mpic_alloc(np, res.start,
+			MPIC_PRIMARY | MPIC_WANTS_RESET |
+			MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS,
+			0, 256, " MPIC     ");
+	of_node_put(np);
+	BUG_ON(mpic == NULL);
+
+	mpic_init(mpic);
+
+#ifdef CONFIG_PPC_I8259
+	/* Initialize i8259 controller */
+	for_each_node_by_type(np, "interrupt-controller")
+		if (of_device_is_compatible(np, "chrp,iic")) {
+			cascade_node = np;
+			break;
+		}
+
+	if (cascade_node == NULL) {
+		printk(KERN_DEBUG "Could not find i8259 PIC\n");
+		return;
+	}
+
+	cascade_irq = irq_of_parse_and_map(cascade_node, 0);
+	if (cascade_irq == NO_IRQ) {
+		printk(KERN_ERR "Failed to map cascade interrupt\n");
+		return;
+	}
+
+	i8259_init(cascade_node, 0);
+	of_node_put(cascade_node);
+
+	set_irq_chained_handler(cascade_irq, mpc86xx_8259_cascade);
+#endif
+}
diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c
index 510a06ef0b55..00e6fad3b3ca 100644
--- a/arch/powerpc/platforms/86xx/sbc8641d.c
+++ b/arch/powerpc/platforms/86xx/sbc8641d.c
@@ -38,29 +38,6 @@
 #include "mpc86xx.h"
 
 static void __init
-sbc8641_init_irq(void)
-{
-	struct mpic *mpic1;
-	struct device_node *np;
-	struct resource res;
-
-	/* Determine PIC address. */
-	np = of_find_node_by_type(NULL, "open-pic");
-	if (np == NULL)
-		return;
-	of_address_to_resource(np, 0, &res);
-
-	/* Alloc mpic structure and per isu has 16 INT entries. */
-	mpic1 = mpic_alloc(np, res.start,
-			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
-			0, 256, " MPIC     ");
-	of_node_put(np);
-	BUG_ON(mpic1 == NULL);
-
-	mpic_init(mpic1);
-}
-
-static void __init
 sbc8641_setup_arch(void)
 {
 #ifdef CONFIG_PCI
@@ -151,7 +128,7 @@ define_machine(sbc8641) {
 	.name			= "SBC8641D",
 	.probe			= sbc8641_probe,
 	.setup_arch		= sbc8641_setup_arch,
-	.init_IRQ		= sbc8641_init_irq,
+	.init_IRQ		= mpc86xx_init_irq,
 	.show_cpuinfo		= sbc8641_show_cpuinfo,
 	.get_irq		= mpic_get_irq,
 	.restart		= fsl_rstcr_restart,
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 6fc849e51e48..71d7562e190b 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -105,6 +105,16 @@ config 8xx_COPYBACK
 
 	  If in doubt, say Y here.
 
+config 8xx_GPIO
+	bool "GPIO API Support"
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Saying Y here will cause the ports on an MPC8xx processor to be used
+	  with the GPIO API.  If you say N here, the kernel needs less memory.
+
+	  If in doubt, say Y here.
+
 config 8xx_CPU6
 	bool "CPU6 Silicon Errata (860 Pre Rev. C)"
 	help
diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
index c028a5b71bbb..caaec29796b7 100644
--- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
@@ -65,6 +65,10 @@ static struct cpm_pin mpc866ads_pins[] = {
 	{CPM_PORTD, 13, CPM_PIN_OUTPUT},
 	{CPM_PORTD, 14, CPM_PIN_OUTPUT},
 	{CPM_PORTD, 15, CPM_PIN_OUTPUT},
+
+	/* I2C */
+	{CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+	{CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
 };
 
 static void __init init_ioports(void)
diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
index 6e7ded0233f6..45ed6cdc1310 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -158,6 +158,9 @@ static struct cpm_pin mpc885ads_pins[] = {
 	{CPM_PORTE, 28, CPM_PIN_OUTPUT},
 	{CPM_PORTE, 29, CPM_PIN_OUTPUT},
 #endif
+	/* I2C */
+	{CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+	{CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
 };
 
 static void __init init_ioports(void)
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 87454c526973..4c900efa164e 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -1,36 +1,9 @@
 menu "Platform support"
 
-choice
-	prompt "Machine type"
-	depends on PPC64 || 6xx
-	default PPC_MULTIPLATFORM
-
 config PPC_MULTIPLATFORM
-	bool "Generic desktop/server/laptop"
-	help
-	  Select this option if configuring for an IBM pSeries or
-	  RS/6000 machine, an Apple machine, or a PReP, CHRP,
-	  Maple or Cell-based machine.
-
-config PPC_82xx
-	bool "Freescale 82xx"
-	depends on 6xx
-
-config PPC_83xx
-	bool "Freescale 83xx"
-	depends on 6xx
-	select FSL_SOC
-	select MPC83xx
-	select IPIC
-
-config PPC_86xx
-	bool "Freescale 86xx"
-	depends on 6xx
-	select FSL_SOC
-	select ALTIVEC
-	help
-	  The Freescale E600 SoCs have 74xx cores.
-endchoice
+	bool
+	depends on PPC64 || 6xx
+	default y
 
 config CLASSIC32
 	def_bool y
@@ -280,17 +253,15 @@ config CPM2
 	depends on MPC85xx || 8260
 	select CPM
 	select PPC_LIB_RHEAP
+	select PPC_PCI_CHOICE
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_GPIO
 	help
 	  The CPM2 (Communications Processor Module) is a coprocessor on
 	  embedded CPUs made by Freescale.  Selecting this option means that
 	  you wish to build a kernel for a machine with a CPM2 coprocessor
 	  on it (826x, 827x, 8560).
 
-config PPC_CPM_NEW_BINDING
-	bool
-	depends on CPM1 || CPM2
-	default y
-
 config AXON_RAM
 	tristate "Axon DDR2 memory device driver"
 	depends on PPC_IBM_CELL_BLADE
@@ -312,6 +283,7 @@ config FSL_ULI1575
 
 config CPM
 	bool
+	select PPC_CLOCK
 
 config OF_RTC
 	bool
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index f7efaa925a13..7f6512733862 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -42,12 +42,14 @@ config 40x
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
 	select 4xx_SOC
+	select PPC_PCI_CHOICE
 
 config 44x
 	bool "AMCC 44x"
 	select PPC_DCR_NATIVE
 	select PPC_UDBG_16550
 	select 4xx_SOC
+	select PPC_PCI_CHOICE
 
 config E200
 	bool "Freescale e200"
@@ -84,9 +86,6 @@ config TUNE_CELL
 	  machines. When building a kernel that is supposed to run only
 	  on Cell, you should also select the POWER4_ONLY option.
 
-config 6xx
-	bool
-
 # this is temp to handle compat with arch=ppc
 config 8xx
 	bool
@@ -95,6 +94,11 @@ config E500
 	select FSL_EMB_PERFMON
 	bool
 
+config PPC_E500MC
+	bool "e500mc Support"
+	select PPC_FPU
+	depends on E500
+
 config PPC_FPU
 	bool
 	default y if PPC64
@@ -155,9 +159,25 @@ config ALTIVEC
 
 	  If in doubt, say Y here.
 
+config VSX
+	bool "VSX Support"
+	depends on POWER4 && ALTIVEC && PPC_FPU
+	---help---
+
+	  This option enables kernel support for the Vector Scaler extensions
+	  to the PowerPC processor. The kernel currently supports saving and
+	  restoring VSX registers, and turning on the 'VSX enable' bit so user
+	  processes can execute VSX instructions.
+
+	  This option is only useful if you have a processor that supports
+	  VSX (P7 and above), but does not have any affect on a non-VSX
+	  CPUs (it does, however add code to the kernel).
+
+	  If in doubt, say Y here.
+
 config SPE
 	bool "SPE Support"
-	depends on E200 || E500
+	depends on E200 || (E500 && !PPC_E500MC)
 	default y
 	---help---
 	  This option enables kernel support for the Signal Processing
@@ -182,7 +202,7 @@ config PPC_STD_MMU_32
 
 config PPC_MM_SLICES
 	bool
-	default y if HUGETLB_PAGE
+	default y if HUGETLB_PAGE || PPC_64K_PAGES
 	default n
 
 config VIRT_CPU_ACCOUNTING
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 423a0234dc31..8079e0b4fd69 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -1,13 +1,7 @@
 
 obj-$(CONFIG_FSL_ULI1575)	+= fsl_uli1575.o
 
-ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_PMAC)		+= powermac/
-else
-ifeq ($(CONFIG_PPC64),y)
-obj-$(CONFIG_PPC_PMAC)		+= powermac/
-endif
-endif
 obj-$(CONFIG_PPC_CHRP)		+= chrp/
 obj-$(CONFIG_40x)		+= 40x/
 obj-$(CONFIG_44x)		+= 44x/
diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig
index 3959fcfe731c..c14d7d8d96c8 100644
--- a/arch/powerpc/platforms/cell/Kconfig
+++ b/arch/powerpc/platforms/cell/Kconfig
@@ -83,6 +83,22 @@ config CBE_RAS
 	depends on PPC_CELL_NATIVE
 	default y
 
+config PPC_IBM_CELL_RESETBUTTON
+	bool "IBM Cell Blade Pinhole reset button"
+	depends on CBE_RAS && PPC_IBM_CELL_BLADE
+	default y
+	help
+	  Support Pinhole Resetbutton on IBM Cell blades.
+	  This adds a method to trigger system reset via front panel pinhole button.
+
+config PPC_IBM_CELL_POWERBUTTON
+	tristate "IBM Cell Blade power button"
+	depends on PPC_IBM_CELL_BLADE && PPC_PMI && INPUT_EVDEV
+	default y
+	help
+	  Support Powerbutton on IBM Cell blades.
+	  This will enable the powerbutton as an input device.
+
 config CBE_THERM
 	tristate "CBE thermal support"
 	default m
@@ -107,6 +123,15 @@ config CBE_CPUFREQ_PMI
 	  processor will not only be able to run at lower speed,
 	  but also at lower core voltage.
 
+config CBE_CPUFREQ_SPU_GOVERNOR
+	tristate "CBE frequency scaling based on SPU usage"
+	depends on SPU_FS && CPU_FREQ
+	default m
+	help
+	  This governor checks for spu usage to adjust the cpu frequency.
+	  If no spu is running on a given cpu, that cpu will be throttled to
+	  the minimal possible frequency.
+
 endmenu
 
 config OPROFILE_CELL
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index c2a7e4e5ddf9..7fd830872c43 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -8,6 +8,9 @@ obj-$(CONFIG_CBE_THERM)			+= cbe_thermal.o
 obj-$(CONFIG_CBE_CPUFREQ_PMI)		+= cbe_cpufreq_pmi.o
 obj-$(CONFIG_CBE_CPUFREQ)		+= cbe-cpufreq.o
 cbe-cpufreq-y				+= cbe_cpufreq_pervasive.o cbe_cpufreq.o
+obj-$(CONFIG_CBE_CPUFREQ_SPU_GOVERNOR)	+= cpufreq_spudemand.o
+
+obj-$(CONFIG_PPC_IBM_CELL_POWERBUTTON)	+= cbe_powerbutton.o
 
 ifeq ($(CONFIG_SMP),y)
 obj-$(CONFIG_PPC_CELL_NATIVE)		+= smp.o
diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c
index c39f5c225f2e..896548ba1ca1 100644
--- a/arch/powerpc/platforms/cell/axon_msi.c
+++ b/arch/powerpc/platforms/cell/axon_msi.c
@@ -14,6 +14,7 @@
 #include <linux/pci.h>
 #include <linux/msi.h>
 #include <linux/of_platform.h>
+#include <linux/debugfs.h>
 
 #include <asm/dcr.h>
 #include <asm/machdep.h>
@@ -69,8 +70,19 @@ struct axon_msic {
 	dma_addr_t fifo_phys;
 	dcr_host_t dcr_host;
 	u32 read_offset;
+#ifdef DEBUG
+	u32 __iomem *trigger;
+#endif
 };
 
+#ifdef DEBUG
+void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic);
+#else
+static inline void axon_msi_debug_setup(struct device_node *dn,
+					struct axon_msic *msic) { }
+#endif
+
+
 static void msic_dcr_write(struct axon_msic *msic, unsigned int dcr_n, u32 val)
 {
 	pr_debug("axon_msi: dcr_write(0x%x, 0x%x)\n", val, dcr_n);
@@ -346,7 +358,14 @@ static int axon_msi_probe(struct of_device *device,
 		goto out_free_msic;
 	}
 
-	msic->irq_host = irq_alloc_host(of_node_get(dn), IRQ_HOST_MAP_NOMAP,
+	virq = irq_of_parse_and_map(dn, 0);
+	if (virq == NO_IRQ) {
+		printk(KERN_ERR "axon_msi: irq parse and map failed for %s\n",
+		       dn->full_name);
+		goto out_free_fifo;
+	}
+
+	msic->irq_host = irq_alloc_host(dn, IRQ_HOST_MAP_NOMAP,
 					NR_IRQS, &msic_host_ops, 0);
 	if (!msic->irq_host) {
 		printk(KERN_ERR "axon_msi: couldn't allocate irq_host for %s\n",
@@ -356,13 +375,6 @@ static int axon_msi_probe(struct of_device *device,
 
 	msic->irq_host->host_data = msic;
 
-	virq = irq_of_parse_and_map(dn, 0);
-	if (virq == NO_IRQ) {
-		printk(KERN_ERR "axon_msi: irq parse and map failed for %s\n",
-		       dn->full_name);
-		goto out_free_host;
-	}
-
 	set_irq_data(virq, msic);
 	set_irq_chained_handler(virq, axon_msi_cascade);
 	pr_debug("axon_msi: irq 0x%x setup for axon_msi\n", virq);
@@ -381,12 +393,12 @@ static int axon_msi_probe(struct of_device *device,
 	ppc_md.teardown_msi_irqs = axon_msi_teardown_msi_irqs;
 	ppc_md.msi_check_device = axon_msi_check_device;
 
+	axon_msi_debug_setup(dn, msic);
+
 	printk(KERN_DEBUG "axon_msi: setup MSIC on %s\n", dn->full_name);
 
 	return 0;
 
-out_free_host:
-	kfree(msic->irq_host);
 out_free_fifo:
 	dma_free_coherent(&device->dev, MSIC_FIFO_SIZE_BYTES, msic->fifo_virt,
 			  msic->fifo_phys);
@@ -418,3 +430,47 @@ static int __init axon_msi_init(void)
 	return of_register_platform_driver(&axon_msi_driver);
 }
 subsys_initcall(axon_msi_init);
+
+
+#ifdef DEBUG
+static int msic_set(void *data, u64 val)
+{
+	struct axon_msic *msic = data;
+	out_le32(msic->trigger, val);
+	return 0;
+}
+
+static int msic_get(void *data, u64 *val)
+{
+	*val = 0;
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(fops_msic, msic_get, msic_set, "%llu\n");
+
+void axon_msi_debug_setup(struct device_node *dn, struct axon_msic *msic)
+{
+	char name[8];
+	u64 addr;
+
+	addr = of_translate_address(dn, of_get_property(dn, "reg", NULL));
+	if (addr == OF_BAD_ADDR) {
+		pr_debug("axon_msi: couldn't translate reg property\n");
+		return;
+	}
+
+	msic->trigger = ioremap(addr, 0x4);
+	if (!msic->trigger) {
+		pr_debug("axon_msi: ioremap failed\n");
+		return;
+	}
+
+	snprintf(name, sizeof(name), "msic_%d", of_node_to_nid(dn));
+
+	if (!debugfs_create_file(name, 0600, powerpc_debugfs_root,
+				 msic, &fops_msic)) {
+		pr_debug("axon_msi: debugfs_create_file failed!\n");
+		return;
+	}
+}
+#endif /* DEBUG */
diff --git a/arch/powerpc/platforms/cell/beat_htab.c b/arch/powerpc/platforms/cell/beat_htab.c
index 81467ff055c8..2e67bd840e01 100644
--- a/arch/powerpc/platforms/cell/beat_htab.c
+++ b/arch/powerpc/platforms/cell/beat_htab.c
@@ -112,7 +112,7 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group,
 	if (!(vflags & HPTE_V_BOLTED))
 		DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
 
-	if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE))
+	if (rflags & _PAGE_NO_CACHE)
 		hpte_r &= ~_PAGE_COHERENT;
 
 	spin_lock(&beat_htab_lock);
@@ -334,7 +334,7 @@ static long beat_lpar_hpte_insert_v3(unsigned long hpte_group,
 	if (!(vflags & HPTE_V_BOLTED))
 		DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
 
-	if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE))
+	if (rflags & _PAGE_NO_CACHE)
 		hpte_r &= ~_PAGE_COHERENT;
 
 	/* insert into not-volted entry */
diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
index 69288f653144..3233fe84d158 100644
--- a/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
+++ b/arch/powerpc/platforms/cell/cbe_cpufreq_pmi.c
@@ -96,6 +96,12 @@ static int pmi_notifier(struct notifier_block *nb,
 	struct cpufreq_frequency_table *cbe_freqs;
 	u8 node;
 
+	/* Should this really be called for CPUFREQ_ADJUST, CPUFREQ_INCOMPATIBLE
+	 * and CPUFREQ_NOTIFY policy events?)
+	 */
+	if (event == CPUFREQ_START)
+		return 0;
+
 	cbe_freqs = cpufreq_frequency_get_table(policy->cpu);
 	node = cbe_cpu_to_node(policy->cpu);
 
diff --git a/arch/powerpc/platforms/cell/cbe_powerbutton.c b/arch/powerpc/platforms/cell/cbe_powerbutton.c
new file mode 100644
index 000000000000..dcddaa5fcb66
--- /dev/null
+++ b/arch/powerpc/platforms/cell/cbe_powerbutton.c
@@ -0,0 +1,117 @@
+/*
+ * driver for powerbutton on IBM cell blades
+ *
+ * (C) Copyright IBM Corp. 2005-2008
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <asm/pmi.h>
+#include <asm/prom.h>
+
+static struct input_dev *button_dev;
+static struct platform_device *button_pdev;
+
+static void cbe_powerbutton_handle_pmi(pmi_message_t pmi_msg)
+{
+	BUG_ON(pmi_msg.type != PMI_TYPE_POWER_BUTTON);
+
+	input_report_key(button_dev, KEY_POWER, 1);
+	input_sync(button_dev);
+	input_report_key(button_dev, KEY_POWER, 0);
+	input_sync(button_dev);
+}
+
+static struct pmi_handler cbe_pmi_handler = {
+	.type			= PMI_TYPE_POWER_BUTTON,
+	.handle_pmi_message	= cbe_powerbutton_handle_pmi,
+};
+
+static int __init cbe_powerbutton_init(void)
+{
+	int ret = 0;
+	struct input_dev *dev;
+
+	if (!machine_is_compatible("IBM,CBPLUS-1.0")) {
+		printk(KERN_ERR "%s: Not a cell blade.\n", __func__);
+		ret = -ENODEV;
+		goto out;
+	}
+
+	dev = input_allocate_device();
+	if (!dev) {
+		ret = -ENOMEM;
+		printk(KERN_ERR "%s: Not enough memory.\n", __func__);
+		goto out;
+	}
+
+	set_bit(EV_KEY, dev->evbit);
+	set_bit(KEY_POWER, dev->keybit);
+
+	dev->name = "Power Button";
+	dev->id.bustype = BUS_HOST;
+
+	/* this makes the button look like an acpi power button
+	 * no clue whether anyone relies on that though */
+	dev->id.product = 0x02;
+	dev->phys = "LNXPWRBN/button/input0";
+
+	button_pdev = platform_device_register_simple("power_button", 0, NULL, 0);
+	if (IS_ERR(button_pdev)) {
+		ret = PTR_ERR(button_pdev);
+		goto out_free_input;
+	}
+
+	dev->dev.parent = &button_pdev->dev;
+	ret = input_register_device(dev);
+	if (ret) {
+		printk(KERN_ERR "%s: Failed to register device\n", __func__);
+		goto out_free_pdev;
+	}
+
+	button_dev = dev;
+
+	ret = pmi_register_handler(&cbe_pmi_handler);
+	if (ret) {
+		printk(KERN_ERR "%s: Failed to register with pmi.\n", __func__);
+		goto out_free_pdev;
+	}
+
+	goto out;
+
+out_free_pdev:
+	platform_device_unregister(button_pdev);
+out_free_input:
+	input_free_device(dev);
+out:
+	return ret;
+}
+
+static void __exit cbe_powerbutton_exit(void)
+{
+	pmi_unregister_handler(&cbe_pmi_handler);
+	platform_device_unregister(button_pdev);
+	input_free_device(button_dev);
+}
+
+module_init(cbe_powerbutton_init);
+module_exit(cbe_powerbutton_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c
index 4852bf312d83..4d4c8c169124 100644
--- a/arch/powerpc/platforms/cell/cbe_thermal.c
+++ b/arch/powerpc/platforms/cell/cbe_thermal.c
@@ -97,7 +97,8 @@ static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iom
 	return value.spe[spu->spe_id];
 }
 
-static ssize_t spu_show_temp(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_temp(struct sys_device *sysdev, struct sysdev_attribute *attr,
+			char *buf)
 {
 	u8 value;
 	struct cbe_pmd_regs __iomem *pmd_regs;
@@ -146,32 +147,38 @@ static ssize_t store_throttle(struct cbe_pmd_regs __iomem *pmd_regs, const char
 	return size;
 }
 
-static ssize_t spu_show_throttle_end(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_throttle_end(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(get_pmd_regs(sysdev), buf, 0);
 }
 
-static ssize_t spu_show_throttle_begin(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_throttle_begin(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(get_pmd_regs(sysdev), buf, 8);
 }
 
-static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev, char *buf)
+static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(get_pmd_regs(sysdev), buf, 16);
 }
 
-static ssize_t spu_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t spu_store_throttle_end(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(get_pmd_regs(sysdev), buf, size, 0);
 }
 
-static ssize_t spu_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t spu_store_throttle_begin(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(get_pmd_regs(sysdev), buf, size, 8);
 }
 
-static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(get_pmd_regs(sysdev), buf, size, 16);
 }
@@ -192,43 +199,51 @@ static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos)
 
 /* shows the temperature of the DTS on the PPE,
  * located near the linear thermal sensor */
-static ssize_t ppe_show_temp0(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_temp0(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return ppe_show_temp(sysdev, buf, 32);
 }
 
 /* shows the temperature of the second DTS on the PPE */
-static ssize_t ppe_show_temp1(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_temp1(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return ppe_show_temp(sysdev, buf, 0);
 }
 
-static ssize_t ppe_show_throttle_end(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_throttle_end(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 32);
 }
 
-static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 40);
 }
 
-static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev, char *buf)
+static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 48);
 }
 
-static ssize_t ppe_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_end(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 32);
 }
 
-static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 40);
 }
 
-static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size)
+static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev,
+			struct sysdev_attribute *attr, const char *buf, size_t size)
 {
 	return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 48);
 }
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 0e04f8fb152a..3e7e0f1568ef 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -281,7 +281,7 @@ static int __init scc_pciex_iowa_init(struct iowa_bus *bus, void *data)
 
 	dummy_page_da = dma_map_single(bus->phb->parent, dummy_page_va,
 				       PAGE_SIZE, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dummy_page_da)) {
+	if (dma_mapping_error(bus->phb->parent, dummy_page_da)) {
 		pr_err("PCIEX:Map dummy page failed.\n");
 		kfree(dummy_page_va);
 		return -1;
diff --git a/arch/powerpc/platforms/cell/cpufreq_spudemand.c b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
new file mode 100644
index 000000000000..a3c6c01bd6db
--- /dev/null
+++ b/arch/powerpc/platforms/cell/cpufreq_spudemand.c
@@ -0,0 +1,184 @@
+/*
+ * spu aware cpufreq governor for the cell processor
+ *
+ * © Copyright IBM Corporation 2006-2008
+ *
+ * Author: Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <asm/atomic.h>
+#include <asm/machdep.h>
+#include <asm/spu.h>
+
+#define POLL_TIME	100000		/* in µs */
+#define EXP		753		/* exp(-1) in fixed-point */
+
+struct spu_gov_info_struct {
+	unsigned long busy_spus;	/* fixed-point */
+	struct cpufreq_policy *policy;
+	struct delayed_work work;
+	unsigned int poll_int;		/* µs */
+};
+static DEFINE_PER_CPU(struct spu_gov_info_struct, spu_gov_info);
+
+static struct workqueue_struct *kspugov_wq;
+
+static int calc_freq(struct spu_gov_info_struct *info)
+{
+	int cpu;
+	int busy_spus;
+
+	cpu = info->policy->cpu;
+	busy_spus = atomic_read(&cbe_spu_info[cpu_to_node(cpu)].busy_spus);
+
+	CALC_LOAD(info->busy_spus, EXP, busy_spus * FIXED_1);
+	pr_debug("cpu %d: busy_spus=%d, info->busy_spus=%ld\n",
+			cpu, busy_spus, info->busy_spus);
+
+	return info->policy->max * info->busy_spus / FIXED_1;
+}
+
+static void spu_gov_work(struct work_struct *work)
+{
+	struct spu_gov_info_struct *info;
+	int delay;
+	unsigned long target_freq;
+
+	info = container_of(work, struct spu_gov_info_struct, work.work);
+
+	/* after cancel_delayed_work_sync we unset info->policy */
+	BUG_ON(info->policy == NULL);
+
+	target_freq = calc_freq(info);
+	__cpufreq_driver_target(info->policy, target_freq, CPUFREQ_RELATION_H);
+
+	delay = usecs_to_jiffies(info->poll_int);
+	queue_delayed_work_on(info->policy->cpu, kspugov_wq, &info->work, delay);
+}
+
+static void spu_gov_init_work(struct spu_gov_info_struct *info)
+{
+	int delay = usecs_to_jiffies(info->poll_int);
+	INIT_DELAYED_WORK_DEFERRABLE(&info->work, spu_gov_work);
+	queue_delayed_work_on(info->policy->cpu, kspugov_wq, &info->work, delay);
+}
+
+static void spu_gov_cancel_work(struct spu_gov_info_struct *info)
+{
+	cancel_delayed_work_sync(&info->work);
+}
+
+static int spu_gov_govern(struct cpufreq_policy *policy, unsigned int event)
+{
+	unsigned int cpu = policy->cpu;
+	struct spu_gov_info_struct *info, *affected_info;
+	int i;
+	int ret = 0;
+
+	info = &per_cpu(spu_gov_info, cpu);
+
+	switch (event) {
+	case CPUFREQ_GOV_START:
+		if (!cpu_online(cpu)) {
+			printk(KERN_ERR "cpu %d is not online\n", cpu);
+			ret = -EINVAL;
+			break;
+		}
+
+		if (!policy->cur) {
+			printk(KERN_ERR "no cpu specified in policy\n");
+			ret = -EINVAL;
+			break;
+		}
+
+		/* initialize spu_gov_info for all affected cpus */
+		for_each_cpu_mask(i, policy->cpus) {
+			affected_info = &per_cpu(spu_gov_info, i);
+			affected_info->policy = policy;
+		}
+
+		info->poll_int = POLL_TIME;
+
+		/* setup timer */
+		spu_gov_init_work(info);
+
+		break;
+
+	case CPUFREQ_GOV_STOP:
+		/* cancel timer */
+		spu_gov_cancel_work(info);
+
+		/* clean spu_gov_info for all affected cpus */
+		for_each_cpu_mask (i, policy->cpus) {
+			info = &per_cpu(spu_gov_info, i);
+			info->policy = NULL;
+		}
+
+		break;
+	}
+
+	return ret;
+}
+
+static struct cpufreq_governor spu_governor = {
+	.name = "spudemand",
+	.governor = spu_gov_govern,
+	.owner = THIS_MODULE,
+};
+
+/*
+ * module init and destoy
+ */
+
+static int __init spu_gov_init(void)
+{
+	int ret;
+
+	kspugov_wq = create_workqueue("kspugov");
+	if (!kspugov_wq) {
+		printk(KERN_ERR "creation of kspugov failed\n");
+		ret = -EFAULT;
+		goto out;
+	}
+
+	ret = cpufreq_register_governor(&spu_governor);
+	if (ret) {
+		printk(KERN_ERR "registration of governor failed\n");
+		destroy_workqueue(kspugov_wq);
+		goto out;
+	}
+out:
+	return ret;
+}
+
+static void __exit spu_gov_exit(void)
+{
+	cpufreq_unregister_governor(&spu_governor);
+	destroy_workqueue(kspugov_wq);
+}
+
+
+module_init(spu_gov_init);
+module_exit(spu_gov_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
+
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c
index 5bf7df146022..2d5bb22d6c09 100644
--- a/arch/powerpc/platforms/cell/interrupt.c
+++ b/arch/powerpc/platforms/cell/interrupt.c
@@ -218,6 +218,7 @@ void iic_request_IPIs(void)
 {
 	iic_request_ipi(PPC_MSG_CALL_FUNCTION, "IPI-call");
 	iic_request_ipi(PPC_MSG_RESCHEDULE, "IPI-resched");
+	iic_request_ipi(PPC_MSG_CALL_FUNC_SINGLE, "IPI-call-single");
 #ifdef CONFIG_DEBUGGER
 	iic_request_ipi(PPC_MSG_DEBUGGER_BREAK, "IPI-debug");
 #endif /* CONFIG_DEBUGGER */
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 45646b2b4af4..e06420af5fe9 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -172,8 +172,9 @@ static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte,
 	}
 }
 
-static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
-		unsigned long uaddr, enum dma_data_direction direction)
+static int tce_build_cell(struct iommu_table *tbl, long index, long npages,
+		unsigned long uaddr, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	int i;
 	unsigned long *io_pte, base_pte;
@@ -198,6 +199,8 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
 	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW |
 		(window->ioid & IOPTE_IOID_Mask);
 #endif
+	if (unlikely(dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs)))
+		base_pte &= ~IOPTE_SO_RW;
 
 	io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset);
 
@@ -210,6 +213,7 @@ static void tce_build_cell(struct iommu_table *tbl, long index, long npages,
 
 	pr_debug("tce_build_cell(index=%lx,n=%lx,dir=%d,base_pte=%lx)\n",
 		 index, npages, direction, base_pte);
+	return 0;
 }
 
 static void tce_free_cell(struct iommu_table *tbl, long index, long npages)
@@ -519,7 +523,7 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np,
 
 	__set_bit(0, window->table.it_map);
 	tce_build_cell(&window->table, window->table.it_offset, 1,
-		       (unsigned long)iommu->pad_page, DMA_TO_DEVICE);
+		       (unsigned long)iommu->pad_page, DMA_TO_DEVICE, NULL);
 	window->table.it_hint = window->table.it_blocksize;
 
 	return window;
@@ -538,9 +542,11 @@ static struct cbe_iommu *cell_iommu_for_node(int nid)
 static unsigned long cell_dma_direct_offset;
 
 static unsigned long dma_iommu_fixed_base;
-struct dma_mapping_ops dma_iommu_fixed_ops;
 
-static void cell_dma_dev_setup_iommu(struct device *dev)
+/* iommu_fixed_is_weak is set if booted with iommu_fixed=weak */
+static int iommu_fixed_is_weak;
+
+static struct iommu_table *cell_get_iommu_table(struct device *dev)
 {
 	struct iommu_window *window;
 	struct cbe_iommu *iommu;
@@ -555,13 +561,105 @@ static void cell_dma_dev_setup_iommu(struct device *dev)
 		printk(KERN_ERR "iommu: missing iommu for %s (node %d)\n",
 		       archdata->of_node ? archdata->of_node->full_name : "?",
 		       archdata->numa_node);
-		return;
+		return NULL;
 	}
 	window = list_entry(iommu->windows.next, struct iommu_window, list);
 
-	archdata->dma_data = &window->table;
+	return &window->table;
+}
+
+/* A coherent allocation implies strong ordering */
+
+static void *dma_fixed_alloc_coherent(struct device *dev, size_t size,
+				      dma_addr_t *dma_handle, gfp_t flag)
+{
+	if (iommu_fixed_is_weak)
+		return iommu_alloc_coherent(dev, cell_get_iommu_table(dev),
+					    size, dma_handle,
+					    device_to_mask(dev), flag,
+					    dev->archdata.numa_node);
+	else
+		return dma_direct_ops.alloc_coherent(dev, size, dma_handle,
+						     flag);
+}
+
+static void dma_fixed_free_coherent(struct device *dev, size_t size,
+				    void *vaddr, dma_addr_t dma_handle)
+{
+	if (iommu_fixed_is_weak)
+		iommu_free_coherent(cell_get_iommu_table(dev), size, vaddr,
+				    dma_handle);
+	else
+		dma_direct_ops.free_coherent(dev, size, vaddr, dma_handle);
+}
+
+static dma_addr_t dma_fixed_map_single(struct device *dev, void *ptr,
+				       size_t size,
+				       enum dma_data_direction direction,
+				       struct dma_attrs *attrs)
+{
+	if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+		return dma_direct_ops.map_single(dev, ptr, size, direction,
+						 attrs);
+	else
+		return iommu_map_single(dev, cell_get_iommu_table(dev), ptr,
+					size, device_to_mask(dev), direction,
+					attrs);
 }
 
+static void dma_fixed_unmap_single(struct device *dev, dma_addr_t dma_addr,
+				   size_t size,
+				   enum dma_data_direction direction,
+				   struct dma_attrs *attrs)
+{
+	if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+		dma_direct_ops.unmap_single(dev, dma_addr, size, direction,
+					    attrs);
+	else
+		iommu_unmap_single(cell_get_iommu_table(dev), dma_addr, size,
+				   direction, attrs);
+}
+
+static int dma_fixed_map_sg(struct device *dev, struct scatterlist *sg,
+			   int nents, enum dma_data_direction direction,
+			   struct dma_attrs *attrs)
+{
+	if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+		return dma_direct_ops.map_sg(dev, sg, nents, direction, attrs);
+	else
+		return iommu_map_sg(dev, cell_get_iommu_table(dev), sg, nents,
+				    device_to_mask(dev), direction, attrs);
+}
+
+static void dma_fixed_unmap_sg(struct device *dev, struct scatterlist *sg,
+			       int nents, enum dma_data_direction direction,
+			       struct dma_attrs *attrs)
+{
+	if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
+		dma_direct_ops.unmap_sg(dev, sg, nents, direction, attrs);
+	else
+		iommu_unmap_sg(cell_get_iommu_table(dev), sg, nents, direction,
+			       attrs);
+}
+
+static int dma_fixed_dma_supported(struct device *dev, u64 mask)
+{
+	return mask == DMA_64BIT_MASK;
+}
+
+static int dma_set_mask_and_switch(struct device *dev, u64 dma_mask);
+
+struct dma_mapping_ops dma_iommu_fixed_ops = {
+	.alloc_coherent = dma_fixed_alloc_coherent,
+	.free_coherent  = dma_fixed_free_coherent,
+	.map_single     = dma_fixed_map_single,
+	.unmap_single   = dma_fixed_unmap_single,
+	.map_sg         = dma_fixed_map_sg,
+	.unmap_sg       = dma_fixed_unmap_sg,
+	.dma_supported  = dma_fixed_dma_supported,
+	.set_dma_mask   = dma_set_mask_and_switch,
+};
+
 static void cell_dma_dev_setup_fixed(struct device *dev);
 
 static void cell_dma_dev_setup(struct device *dev)
@@ -572,7 +670,7 @@ static void cell_dma_dev_setup(struct device *dev)
 	if (get_dma_ops(dev) == &dma_iommu_fixed_ops)
 		cell_dma_dev_setup_fixed(dev);
 	else if (get_pci_dma_ops() == &dma_iommu_ops)
-		cell_dma_dev_setup_iommu(dev);
+		archdata->dma_data = cell_get_iommu_table(dev);
 	else if (get_pci_dma_ops() == &dma_direct_ops)
 		archdata->dma_data = (void *)cell_dma_direct_offset;
 	else
@@ -918,9 +1016,16 @@ static void cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu,
 
 	pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase);
 
-	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M | IOPTE_SO_RW
+	base_pte = IOPTE_PP_W | IOPTE_PP_R | IOPTE_M
 		    | (cell_iommu_get_ioid(np) & IOPTE_IOID_Mask);
 
+	if (iommu_fixed_is_weak)
+		pr_info("IOMMU: Using weak ordering for fixed mapping\n");
+	else {
+		pr_info("IOMMU: Using strong ordering for fixed mapping\n");
+		base_pte |= IOPTE_SO_RW;
+	}
+
 	for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) {
 		/* Don't touch the dynamic region */
 		ioaddr = uaddr + fbase;
@@ -1036,9 +1141,6 @@ static int __init cell_iommu_fixed_mapping_init(void)
 		cell_iommu_setup_window(iommu, np, dbase, dsize, 0);
 	}
 
-	dma_iommu_fixed_ops = dma_direct_ops;
-	dma_iommu_fixed_ops.set_dma_mask = dma_set_mask_and_switch;
-
 	dma_iommu_ops.set_dma_mask = dma_set_mask_and_switch;
 	set_pci_dma_ops(&dma_iommu_ops);
 
@@ -1049,9 +1151,23 @@ static int iommu_fixed_disabled;
 
 static int __init setup_iommu_fixed(char *str)
 {
+	struct device_node *pciep;
+
 	if (strcmp(str, "off") == 0)
 		iommu_fixed_disabled = 1;
 
+	/* If we can find a pcie-endpoint in the device tree assume that
+	 * we're on a triblade or a CAB so by default the fixed mapping
+	 * should be set to be weakly ordered; but only if the boot
+	 * option WASN'T set for strong ordering
+	 */
+	pciep = of_find_node_by_type(NULL, "pcie-endpoint");
+
+	if (strcmp(str, "weak") == 0 || (pciep && strcmp(str, "strong") != 0))
+		iommu_fixed_is_weak = 1;
+
+	of_node_put(pciep);
+
 	return 1;
 }
 __setup("iommu_fixed=", setup_iommu_fixed);
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
index 8a3631ce912b..efdacc829576 100644
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -38,8 +38,6 @@
 
 #include "pervasive.h"
 
-static int sysreset_hack;
-
 static void cbe_power_save(void)
 {
 	unsigned long ctrl, thread_switch_control;
@@ -87,9 +85,6 @@ static void cbe_power_save(void)
 
 static int cbe_system_reset_exception(struct pt_regs *regs)
 {
-	int cpu;
-	struct cbe_pmd_regs __iomem *pmd;
-
 	switch (regs->msr & SRR1_WAKEMASK) {
 	case SRR1_WAKEEE:
 		do_IRQ(regs);
@@ -98,19 +93,7 @@ static int cbe_system_reset_exception(struct pt_regs *regs)
 		timer_interrupt(regs);
 		break;
 	case SRR1_WAKEMT:
-		/*
-		 * The BMC can inject user triggered system reset exceptions,
-		 * but cannot set the system reset reason in srr1,
-		 * so check an extra register here.
-		 */
-		if (sysreset_hack && (cpu = smp_processor_id()) == 0) {
-			pmd = cbe_get_cpu_pmd_regs(cpu);
-			if (in_be64(&pmd->ras_esc_0) & 0xffff) {
-				out_be64(&pmd->ras_esc_0, 0);
-				return 0;
-			}
-		}
-		break;
+		return cbe_sysreset_hack();
 #ifdef CONFIG_CBE_RAS
 	case SRR1_WAKESYSERR:
 		cbe_system_error_exception(regs);
@@ -134,8 +117,6 @@ void __init cbe_pervasive_init(void)
 	if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO))
 		return;
 
-	sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
-
 	for_each_possible_cpu(cpu) {
 		struct cbe_pmd_regs __iomem *regs = cbe_get_cpu_pmd_regs(cpu);
 		if (!regs)
@@ -144,12 +125,6 @@ void __init cbe_pervasive_init(void)
 		 /* Enable Pause(0) control bit */
 		out_be64(&regs->pmcr, in_be64(&regs->pmcr) |
 					    CBE_PMD_PAUSE_ZERO_CONTROL);
-
-		/* Enable JTAG system-reset hack */
-		if (sysreset_hack)
-			out_be32(&regs->fir_mode_reg,
-				in_be32(&regs->fir_mode_reg) |
-				CBE_PMD_FIR_MODE_M8);
 	}
 
 	ppc_md.power_save = cbe_power_save;
diff --git a/arch/powerpc/platforms/cell/pervasive.h b/arch/powerpc/platforms/cell/pervasive.h
index 7b50947f8044..fd4d7b7092b4 100644
--- a/arch/powerpc/platforms/cell/pervasive.h
+++ b/arch/powerpc/platforms/cell/pervasive.h
@@ -30,4 +30,13 @@ extern void cbe_system_error_exception(struct pt_regs *regs);
 extern void cbe_maintenance_exception(struct pt_regs *regs);
 extern void cbe_thermal_exception(struct pt_regs *regs);
 
+#ifdef CONFIG_PPC_IBM_CELL_RESETBUTTON
+extern int cbe_sysreset_hack(void);
+#else
+static inline int cbe_sysreset_hack(void)
+{
+	return 1;
+}
+#endif /* CONFIG_PPC_IBM_CELL_RESETBUTTON */
+
 #endif
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 655704ad03cf..2a14b052abcd 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -17,6 +17,7 @@
 #include <asm/reg.h>
 #include <asm/io.h>
 #include <asm/prom.h>
+#include <asm/kexec.h>
 #include <asm/machdep.h>
 #include <asm/rtas.h>
 #include <asm/cell-regs.h>
@@ -226,10 +227,61 @@ static int cbe_ptcal_notify_reboot(struct notifier_block *nb,
 	return cbe_ptcal_disable();
 }
 
+static void cbe_ptcal_crash_shutdown(void)
+{
+	cbe_ptcal_disable();
+}
+
 static struct notifier_block cbe_ptcal_reboot_notifier = {
 	.notifier_call = cbe_ptcal_notify_reboot
 };
 
+#ifdef CONFIG_PPC_IBM_CELL_RESETBUTTON
+static int sysreset_hack;
+
+static int __init cbe_sysreset_init(void)
+{
+	struct cbe_pmd_regs __iomem *regs;
+
+	sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
+	if (!sysreset_hack)
+		return 0;
+
+	regs = cbe_get_cpu_pmd_regs(0);
+	if (!regs)
+		return 0;
+
+	/* Enable JTAG system-reset hack */
+	out_be32(&regs->fir_mode_reg,
+		in_be32(&regs->fir_mode_reg) |
+		CBE_PMD_FIR_MODE_M8);
+
+	return 0;
+}
+device_initcall(cbe_sysreset_init);
+
+int cbe_sysreset_hack(void)
+{
+	struct cbe_pmd_regs __iomem *regs;
+
+	/*
+	 * The BMC can inject user triggered system reset exceptions,
+	 * but cannot set the system reset reason in srr1,
+	 * so check an extra register here.
+	 */
+	if (sysreset_hack && (smp_processor_id() == 0)) {
+		regs = cbe_get_cpu_pmd_regs(0);
+		if (!regs)
+			return 0;
+		if (in_be64(&regs->ras_esc_0) & 0x0000ffff) {
+			out_be64(&regs->ras_esc_0, 0);
+			return 0;
+		}
+	}
+	return 1;
+}
+#endif /* CONFIG_PPC_IBM_CELL_RESETBUTTON */
+
 int __init cbe_ptcal_init(void)
 {
 	int ret;
@@ -241,12 +293,20 @@ int __init cbe_ptcal_init(void)
 		return -ENODEV;
 
 	ret = register_reboot_notifier(&cbe_ptcal_reboot_notifier);
-	if (ret) {
-		printk(KERN_ERR "Can't disable PTCAL, so not enabling\n");
-		return ret;
-	}
+	if (ret)
+		goto out1;
+
+	ret = crash_shutdown_register(&cbe_ptcal_crash_shutdown);
+	if (ret)
+		goto out2;
 
 	return cbe_ptcal_enable();
+
+out2:
+	unregister_reboot_notifier(&cbe_ptcal_reboot_notifier);
+out1:
+	printk(KERN_ERR "Can't disable PTCAL, so not enabling\n");
+	return ret;
 }
 
 arch_initcall(cbe_ptcal_init);
diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c
index 418b605ac35a..5122ec145271 100644
--- a/arch/powerpc/platforms/cell/spider-pci.c
+++ b/arch/powerpc/platforms/cell/spider-pci.c
@@ -111,7 +111,7 @@ static int __init spiderpci_pci_setup_chip(struct pci_controller *phb,
 
 	dummy_page_da = dma_map_single(phb->parent, dummy_page_va,
 				       PAGE_SIZE, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dummy_page_da)) {
+	if (dma_mapping_error(phb->parent, dummy_page_da)) {
 		pr_err("SPIDER-IOWA:Map dummy page filed.\n");
 		kfree(dummy_page_va);
 		return -1;
diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c
index 3f4b4aef756d..4e5655624ae8 100644
--- a/arch/powerpc/platforms/cell/spider-pic.c
+++ b/arch/powerpc/platforms/cell/spider-pic.c
@@ -300,7 +300,7 @@ static void __init spider_init_one(struct device_node *of_node, int chip,
 		panic("spider_pic: can't map registers !");
 
 	/* Allocate a host */
-	pic->host = irq_alloc_host(of_node_get(of_node), IRQ_HOST_MAP_LINEAR,
+	pic->host = irq_alloc_host(of_node, IRQ_HOST_MAP_LINEAR,
 				   SPIDER_SRC_COUNT, &spider_host_ops,
 				   SPIDER_IRQ_INVALID);
 	if (pic->host == NULL)
diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c
index 78f905bc6a42..a5bdb89a17c3 100644
--- a/arch/powerpc/platforms/cell/spu_base.c
+++ b/arch/powerpc/platforms/cell/spu_base.c
@@ -703,7 +703,8 @@ static unsigned long long spu_acct_time(struct spu *spu,
 }
 
 
-static ssize_t spu_stat_show(struct sys_device *sysdev, char *buf)
+static ssize_t spu_stat_show(struct sys_device *sysdev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct spu *spu = container_of(sysdev, struct spu, sysdev);
 
diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c
index 177735f79317..6653ddbed048 100644
--- a/arch/powerpc/platforms/cell/spufs/context.c
+++ b/arch/powerpc/platforms/cell/spufs/context.c
@@ -130,17 +130,17 @@ void spu_unmap_mappings(struct spu_context *ctx)
 	if (ctx->local_store)
 		unmap_mapping_range(ctx->local_store, 0, LS_SIZE, 1);
 	if (ctx->mfc)
-		unmap_mapping_range(ctx->mfc, 0, 0x1000, 1);
+		unmap_mapping_range(ctx->mfc, 0, SPUFS_MFC_MAP_SIZE, 1);
 	if (ctx->cntl)
-		unmap_mapping_range(ctx->cntl, 0, 0x1000, 1);
+		unmap_mapping_range(ctx->cntl, 0, SPUFS_CNTL_MAP_SIZE, 1);
 	if (ctx->signal1)
-		unmap_mapping_range(ctx->signal1, 0, PAGE_SIZE, 1);
+		unmap_mapping_range(ctx->signal1, 0, SPUFS_SIGNAL_MAP_SIZE, 1);
 	if (ctx->signal2)
-		unmap_mapping_range(ctx->signal2, 0, PAGE_SIZE, 1);
+		unmap_mapping_range(ctx->signal2, 0, SPUFS_SIGNAL_MAP_SIZE, 1);
 	if (ctx->mss)
-		unmap_mapping_range(ctx->mss, 0, 0x1000, 1);
+		unmap_mapping_range(ctx->mss, 0, SPUFS_MSS_MAP_SIZE, 1);
 	if (ctx->psmap)
-		unmap_mapping_range(ctx->psmap, 0, 0x20000, 1);
+		unmap_mapping_range(ctx->psmap, 0, SPUFS_PS_MAP_SIZE, 1);
 	mutex_unlock(&ctx->mapping_lock);
 }
 
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index c81341ff75b5..010a51f59796 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -238,11 +238,13 @@ spufs_mem_write(struct file *file, const char __user *buffer,
 	return size;
 }
 
-static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma,
-					  unsigned long address)
+static int
+spufs_mem_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
 	struct spu_context *ctx	= vma->vm_file->private_data;
-	unsigned long pfn, offset, addr0 = address;
+	unsigned long address = (unsigned long)vmf->virtual_address;
+	unsigned long pfn, offset;
+
 #ifdef CONFIG_SPU_FS_64K_LS
 	struct spu_state *csa = &ctx->csa;
 	int psize;
@@ -260,15 +262,15 @@ static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma,
 	}
 #endif /* CONFIG_SPU_FS_64K_LS */
 
-	offset = (address - vma->vm_start) + (vma->vm_pgoff << PAGE_SHIFT);
+	offset = vmf->pgoff << PAGE_SHIFT;
 	if (offset >= LS_SIZE)
-		return NOPFN_SIGBUS;
+		return VM_FAULT_SIGBUS;
 
-	pr_debug("spufs_mem_mmap_nopfn address=0x%lx -> 0x%lx, offset=0x%lx\n",
-		 addr0, address, offset);
+	pr_debug("spufs_mem_mmap_fault address=0x%lx, offset=0x%lx\n",
+			address, offset);
 
 	if (spu_acquire(ctx))
-		return NOPFN_REFAULT;
+		return VM_FAULT_NOPAGE;
 
 	if (ctx->state == SPU_STATE_SAVED) {
 		vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
@@ -283,12 +285,35 @@ static unsigned long spufs_mem_mmap_nopfn(struct vm_area_struct *vma,
 
 	spu_release(ctx);
 
-	return NOPFN_REFAULT;
+	return VM_FAULT_NOPAGE;
 }
 
+static int spufs_mem_mmap_access(struct vm_area_struct *vma,
+				unsigned long address,
+				void *buf, int len, int write)
+{
+	struct spu_context *ctx = vma->vm_file->private_data;
+	unsigned long offset = address - vma->vm_start;
+	char *local_store;
+
+	if (write && !(vma->vm_flags & VM_WRITE))
+		return -EACCES;
+	if (spu_acquire(ctx))
+		return -EINTR;
+	if ((offset + len) > vma->vm_end)
+		len = vma->vm_end - offset;
+	local_store = ctx->ops->get_ls(ctx);
+	if (write)
+		memcpy_toio(local_store + offset, buf, len);
+	else
+		memcpy_fromio(buf, local_store + offset, len);
+	spu_release(ctx);
+	return len;
+}
 
 static struct vm_operations_struct spufs_mem_mmap_vmops = {
-	.nopfn = spufs_mem_mmap_nopfn,
+	.fault = spufs_mem_mmap_fault,
+	.access = spufs_mem_mmap_access,
 };
 
 static int spufs_mem_mmap(struct file *file, struct vm_area_struct *vma)
@@ -351,20 +376,19 @@ static const struct file_operations spufs_mem_fops = {
 #endif
 };
 
-static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
-				    unsigned long address,
+static int spufs_ps_fault(struct vm_area_struct *vma,
+				    struct vm_fault *vmf,
 				    unsigned long ps_offs,
 				    unsigned long ps_size)
 {
 	struct spu_context *ctx = vma->vm_file->private_data;
-	unsigned long area, offset = address - vma->vm_start;
+	unsigned long area, offset = vmf->pgoff << PAGE_SHIFT;
 	int ret = 0;
 
-	spu_context_nospu_trace(spufs_ps_nopfn__enter, ctx);
+	spu_context_nospu_trace(spufs_ps_fault__enter, ctx);
 
-	offset += vma->vm_pgoff << PAGE_SHIFT;
 	if (offset >= ps_size)
-		return NOPFN_SIGBUS;
+		return VM_FAULT_SIGBUS;
 
 	/*
 	 * Because we release the mmap_sem, the context may be destroyed while
@@ -378,7 +402,7 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
 	 * pages to hand out to the user, but we don't want to wait
 	 * with the mmap_sem held.
 	 * It is possible to drop the mmap_sem here, but then we need
-	 * to return NOPFN_REFAULT because the mappings may have
+	 * to return VM_FAULT_NOPAGE because the mappings may have
 	 * hanged.
 	 */
 	if (spu_acquire(ctx))
@@ -386,14 +410,15 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
 
 	if (ctx->state == SPU_STATE_SAVED) {
 		up_read(&current->mm->mmap_sem);
-		spu_context_nospu_trace(spufs_ps_nopfn__sleep, ctx);
+		spu_context_nospu_trace(spufs_ps_fault__sleep, ctx);
 		ret = spufs_wait(ctx->run_wq, ctx->state == SPU_STATE_RUNNABLE);
-		spu_context_trace(spufs_ps_nopfn__wake, ctx, ctx->spu);
+		spu_context_trace(spufs_ps_fault__wake, ctx, ctx->spu);
 		down_read(&current->mm->mmap_sem);
 	} else {
 		area = ctx->spu->problem_phys + ps_offs;
-		vm_insert_pfn(vma, address, (area + offset) >> PAGE_SHIFT);
-		spu_context_trace(spufs_ps_nopfn__insert, ctx, ctx->spu);
+		vm_insert_pfn(vma, (unsigned long)vmf->virtual_address,
+					(area + offset) >> PAGE_SHIFT);
+		spu_context_trace(spufs_ps_fault__insert, ctx, ctx->spu);
 	}
 
 	if (!ret)
@@ -401,18 +426,18 @@ static unsigned long spufs_ps_nopfn(struct vm_area_struct *vma,
 
 refault:
 	put_spu_context(ctx);
-	return NOPFN_REFAULT;
+	return VM_FAULT_NOPAGE;
 }
 
 #if SPUFS_MMAP_4K
-static unsigned long spufs_cntl_mmap_nopfn(struct vm_area_struct *vma,
-					   unsigned long address)
+static int spufs_cntl_mmap_fault(struct vm_area_struct *vma,
+					   struct vm_fault *vmf)
 {
-	return spufs_ps_nopfn(vma, address, 0x4000, 0x1000);
+	return spufs_ps_fault(vma, vmf, 0x4000, SPUFS_CNTL_MAP_SIZE);
 }
 
 static struct vm_operations_struct spufs_cntl_mmap_vmops = {
-	.nopfn = spufs_cntl_mmap_nopfn,
+	.fault = spufs_cntl_mmap_fault,
 };
 
 /*
@@ -1097,23 +1122,23 @@ static ssize_t spufs_signal1_write(struct file *file, const char __user *buf,
 	return 4;
 }
 
-static unsigned long spufs_signal1_mmap_nopfn(struct vm_area_struct *vma,
-					      unsigned long address)
+static int
+spufs_signal1_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
-#if PAGE_SIZE == 0x1000
-	return spufs_ps_nopfn(vma, address, 0x14000, 0x1000);
-#elif PAGE_SIZE == 0x10000
+#if SPUFS_SIGNAL_MAP_SIZE == 0x1000
+	return spufs_ps_fault(vma, vmf, 0x14000, SPUFS_SIGNAL_MAP_SIZE);
+#elif SPUFS_SIGNAL_MAP_SIZE == 0x10000
 	/* For 64k pages, both signal1 and signal2 can be used to mmap the whole
 	 * signal 1 and 2 area
 	 */
-	return spufs_ps_nopfn(vma, address, 0x10000, 0x10000);
+	return spufs_ps_fault(vma, vmf, 0x10000, SPUFS_SIGNAL_MAP_SIZE);
 #else
 #error unsupported page size
 #endif
 }
 
 static struct vm_operations_struct spufs_signal1_mmap_vmops = {
-	.nopfn = spufs_signal1_mmap_nopfn,
+	.fault = spufs_signal1_mmap_fault,
 };
 
 static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma)
@@ -1234,23 +1259,23 @@ static ssize_t spufs_signal2_write(struct file *file, const char __user *buf,
 }
 
 #if SPUFS_MMAP_4K
-static unsigned long spufs_signal2_mmap_nopfn(struct vm_area_struct *vma,
-					      unsigned long address)
+static int
+spufs_signal2_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
-#if PAGE_SIZE == 0x1000
-	return spufs_ps_nopfn(vma, address, 0x1c000, 0x1000);
-#elif PAGE_SIZE == 0x10000
+#if SPUFS_SIGNAL_MAP_SIZE == 0x1000
+	return spufs_ps_fault(vma, vmf, 0x1c000, SPUFS_SIGNAL_MAP_SIZE);
+#elif SPUFS_SIGNAL_MAP_SIZE == 0x10000
 	/* For 64k pages, both signal1 and signal2 can be used to mmap the whole
 	 * signal 1 and 2 area
 	 */
-	return spufs_ps_nopfn(vma, address, 0x10000, 0x10000);
+	return spufs_ps_fault(vma, vmf, 0x10000, SPUFS_SIGNAL_MAP_SIZE);
 #else
 #error unsupported page size
 #endif
 }
 
 static struct vm_operations_struct spufs_signal2_mmap_vmops = {
-	.nopfn = spufs_signal2_mmap_nopfn,
+	.fault = spufs_signal2_mmap_fault,
 };
 
 static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma)
@@ -1362,14 +1387,14 @@ DEFINE_SPUFS_ATTRIBUTE(spufs_signal2_type, spufs_signal2_type_get,
 		       spufs_signal2_type_set, "%llu\n", SPU_ATTR_ACQUIRE);
 
 #if SPUFS_MMAP_4K
-static unsigned long spufs_mss_mmap_nopfn(struct vm_area_struct *vma,
-					  unsigned long address)
+static int
+spufs_mss_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
-	return spufs_ps_nopfn(vma, address, 0x0000, 0x1000);
+	return spufs_ps_fault(vma, vmf, 0x0000, SPUFS_MSS_MAP_SIZE);
 }
 
 static struct vm_operations_struct spufs_mss_mmap_vmops = {
-	.nopfn = spufs_mss_mmap_nopfn,
+	.fault = spufs_mss_mmap_fault,
 };
 
 /*
@@ -1424,14 +1449,14 @@ static const struct file_operations spufs_mss_fops = {
 	.mmap	 = spufs_mss_mmap,
 };
 
-static unsigned long spufs_psmap_mmap_nopfn(struct vm_area_struct *vma,
-					    unsigned long address)
+static int
+spufs_psmap_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
-	return spufs_ps_nopfn(vma, address, 0x0000, 0x20000);
+	return spufs_ps_fault(vma, vmf, 0x0000, SPUFS_PS_MAP_SIZE);
 }
 
 static struct vm_operations_struct spufs_psmap_mmap_vmops = {
-	.nopfn = spufs_psmap_mmap_nopfn,
+	.fault = spufs_psmap_mmap_fault,
 };
 
 /*
@@ -1484,14 +1509,14 @@ static const struct file_operations spufs_psmap_fops = {
 
 
 #if SPUFS_MMAP_4K
-static unsigned long spufs_mfc_mmap_nopfn(struct vm_area_struct *vma,
-					  unsigned long address)
+static int
+spufs_mfc_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
-	return spufs_ps_nopfn(vma, address, 0x3000, 0x1000);
+	return spufs_ps_fault(vma, vmf, 0x3000, SPUFS_MFC_MAP_SIZE);
 }
 
 static struct vm_operations_struct spufs_mfc_mmap_vmops = {
-	.nopfn = spufs_mfc_mmap_nopfn,
+	.fault = spufs_mfc_mmap_fault,
 };
 
 /*
@@ -2553,22 +2578,74 @@ void spu_switch_log_notify(struct spu *spu, struct spu_context *ctx,
 	wake_up(&ctx->switch_log->wait);
 }
 
-struct tree_descr spufs_dir_contents[] = {
+static int spufs_show_ctx(struct seq_file *s, void *private)
+{
+	struct spu_context *ctx = s->private;
+	u64 mfc_control_RW;
+
+	mutex_lock(&ctx->state_mutex);
+	if (ctx->spu) {
+		struct spu *spu = ctx->spu;
+		struct spu_priv2 __iomem *priv2 = spu->priv2;
+
+		spin_lock_irq(&spu->register_lock);
+		mfc_control_RW = in_be64(&priv2->mfc_control_RW);
+		spin_unlock_irq(&spu->register_lock);
+	} else {
+		struct spu_state *csa = &ctx->csa;
+
+		mfc_control_RW = csa->priv2.mfc_control_RW;
+	}
+
+	seq_printf(s, "%c flgs(%lx) sflgs(%lx) pri(%d) ts(%d) spu(%02d)"
+		" %c %lx %lx %lx %lx %x %x\n",
+		ctx->state == SPU_STATE_SAVED ? 'S' : 'R',
+		ctx->flags,
+		ctx->sched_flags,
+		ctx->prio,
+		ctx->time_slice,
+		ctx->spu ? ctx->spu->number : -1,
+		!list_empty(&ctx->rq) ? 'q' : ' ',
+		ctx->csa.class_0_pending,
+		ctx->csa.class_0_dar,
+		ctx->csa.class_1_dsisr,
+		mfc_control_RW,
+		ctx->ops->runcntl_read(ctx),
+		ctx->ops->status_read(ctx));
+
+	mutex_unlock(&ctx->state_mutex);
+
+	return 0;
+}
+
+static int spufs_ctx_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, spufs_show_ctx, SPUFS_I(inode)->i_ctx);
+}
+
+static const struct file_operations spufs_ctx_fops = {
+	.open           = spufs_ctx_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = single_release,
+};
+
+struct spufs_tree_descr spufs_dir_contents[] = {
 	{ "capabilities", &spufs_caps_fops, 0444, },
-	{ "mem",  &spufs_mem_fops,  0666, },
-	{ "regs", &spufs_regs_fops,  0666, },
+	{ "mem",  &spufs_mem_fops,  0666, LS_SIZE, },
+	{ "regs", &spufs_regs_fops,  0666, sizeof(struct spu_reg128[128]), },
 	{ "mbox", &spufs_mbox_fops, 0444, },
 	{ "ibox", &spufs_ibox_fops, 0444, },
 	{ "wbox", &spufs_wbox_fops, 0222, },
-	{ "mbox_stat", &spufs_mbox_stat_fops, 0444, },
-	{ "ibox_stat", &spufs_ibox_stat_fops, 0444, },
-	{ "wbox_stat", &spufs_wbox_stat_fops, 0444, },
+	{ "mbox_stat", &spufs_mbox_stat_fops, 0444, sizeof(u32), },
+	{ "ibox_stat", &spufs_ibox_stat_fops, 0444, sizeof(u32), },
+	{ "wbox_stat", &spufs_wbox_stat_fops, 0444, sizeof(u32), },
 	{ "signal1", &spufs_signal1_fops, 0666, },
 	{ "signal2", &spufs_signal2_fops, 0666, },
 	{ "signal1_type", &spufs_signal1_type, 0666, },
 	{ "signal2_type", &spufs_signal2_type, 0666, },
 	{ "cntl", &spufs_cntl_fops,  0666, },
-	{ "fpcr", &spufs_fpcr_fops, 0666, },
+	{ "fpcr", &spufs_fpcr_fops, 0666, sizeof(struct spu_reg128), },
 	{ "lslr", &spufs_lslr_ops, 0444, },
 	{ "mfc", &spufs_mfc_fops, 0666, },
 	{ "mss", &spufs_mss_fops, 0666, },
@@ -2578,29 +2655,31 @@ struct tree_descr spufs_dir_contents[] = {
 	{ "decr_status", &spufs_decr_status_ops, 0666, },
 	{ "event_mask", &spufs_event_mask_ops, 0666, },
 	{ "event_status", &spufs_event_status_ops, 0444, },
-	{ "psmap", &spufs_psmap_fops, 0666, },
+	{ "psmap", &spufs_psmap_fops, 0666, SPUFS_PS_MAP_SIZE, },
 	{ "phys-id", &spufs_id_ops, 0666, },
 	{ "object-id", &spufs_object_id_ops, 0666, },
-	{ "mbox_info", &spufs_mbox_info_fops, 0444, },
-	{ "ibox_info", &spufs_ibox_info_fops, 0444, },
-	{ "wbox_info", &spufs_wbox_info_fops, 0444, },
-	{ "dma_info", &spufs_dma_info_fops, 0444, },
-	{ "proxydma_info", &spufs_proxydma_info_fops, 0444, },
+	{ "mbox_info", &spufs_mbox_info_fops, 0444, sizeof(u32), },
+	{ "ibox_info", &spufs_ibox_info_fops, 0444, sizeof(u32), },
+	{ "wbox_info", &spufs_wbox_info_fops, 0444, sizeof(u32), },
+	{ "dma_info", &spufs_dma_info_fops, 0444,
+		sizeof(struct spu_dma_info), },
+	{ "proxydma_info", &spufs_proxydma_info_fops, 0444,
+		sizeof(struct spu_proxydma_info)},
 	{ "tid", &spufs_tid_fops, 0444, },
 	{ "stat", &spufs_stat_fops, 0444, },
 	{ "switch_log", &spufs_switch_log_fops, 0444 },
 	{},
 };
 
-struct tree_descr spufs_dir_nosched_contents[] = {
+struct spufs_tree_descr spufs_dir_nosched_contents[] = {
 	{ "capabilities", &spufs_caps_fops, 0444, },
-	{ "mem",  &spufs_mem_fops,  0666, },
+	{ "mem",  &spufs_mem_fops,  0666, LS_SIZE, },
 	{ "mbox", &spufs_mbox_fops, 0444, },
 	{ "ibox", &spufs_ibox_fops, 0444, },
 	{ "wbox", &spufs_wbox_fops, 0222, },
-	{ "mbox_stat", &spufs_mbox_stat_fops, 0444, },
-	{ "ibox_stat", &spufs_ibox_stat_fops, 0444, },
-	{ "wbox_stat", &spufs_wbox_stat_fops, 0444, },
+	{ "mbox_stat", &spufs_mbox_stat_fops, 0444, sizeof(u32), },
+	{ "ibox_stat", &spufs_ibox_stat_fops, 0444, sizeof(u32), },
+	{ "wbox_stat", &spufs_wbox_stat_fops, 0444, sizeof(u32), },
 	{ "signal1", &spufs_signal1_nosched_fops, 0222, },
 	{ "signal2", &spufs_signal2_nosched_fops, 0222, },
 	{ "signal1_type", &spufs_signal1_type, 0666, },
@@ -2609,7 +2688,7 @@ struct tree_descr spufs_dir_nosched_contents[] = {
 	{ "mfc", &spufs_mfc_fops, 0666, },
 	{ "cntl", &spufs_cntl_fops,  0666, },
 	{ "npc", &spufs_npc_ops, 0666, },
-	{ "psmap", &spufs_psmap_fops, 0666, },
+	{ "psmap", &spufs_psmap_fops, 0666, SPUFS_PS_MAP_SIZE, },
 	{ "phys-id", &spufs_id_ops, 0666, },
 	{ "object-id", &spufs_object_id_ops, 0666, },
 	{ "tid", &spufs_tid_fops, 0444, },
@@ -2617,6 +2696,11 @@ struct tree_descr spufs_dir_nosched_contents[] = {
 	{},
 };
 
+struct spufs_tree_descr spufs_dir_debug_contents[] = {
+	{ ".ctx", &spufs_ctx_fops, 0444, },
+	{},
+};
+
 struct spufs_coredump_reader spufs_coredump_read[] = {
 	{ "regs", __spufs_regs_read, NULL, sizeof(struct spu_reg128[128])},
 	{ "fpcr", __spufs_fpcr_read, NULL, sizeof(struct spu_reg128) },
diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c
index f407b2471855..690ca7b0dcf6 100644
--- a/arch/powerpc/platforms/cell/spufs/inode.c
+++ b/arch/powerpc/platforms/cell/spufs/inode.c
@@ -42,10 +42,19 @@
 
 #include "spufs.h"
 
+struct spufs_sb_info {
+	int debug;
+};
+
 static struct kmem_cache *spufs_inode_cache;
 char *isolated_loader;
 static int isolated_loader_size;
 
+static struct spufs_sb_info *spufs_get_sb_info(struct super_block *sb)
+{
+	return sb->s_fs_info;
+}
+
 static struct inode *
 spufs_alloc_inode(struct super_block *sb)
 {
@@ -69,7 +78,7 @@ spufs_destroy_inode(struct inode *inode)
 }
 
 static void
-spufs_init_once(struct kmem_cache *cachep, void *p)
+spufs_init_once(void *p)
 {
 	struct spufs_inode_info *ei = p;
 
@@ -109,7 +118,7 @@ spufs_setattr(struct dentry *dentry, struct iattr *attr)
 static int
 spufs_new_file(struct super_block *sb, struct dentry *dentry,
 		const struct file_operations *fops, int mode,
-		struct spu_context *ctx)
+		size_t size, struct spu_context *ctx)
 {
 	static struct inode_operations spufs_file_iops = {
 		.setattr = spufs_setattr,
@@ -125,6 +134,7 @@ spufs_new_file(struct super_block *sb, struct dentry *dentry,
 	ret = 0;
 	inode->i_op = &spufs_file_iops;
 	inode->i_fop = fops;
+	inode->i_size = size;
 	inode->i_private = SPUFS_I(inode)->i_ctx = get_spu_context(ctx);
 	d_add(dentry, inode);
 out:
@@ -177,7 +187,7 @@ static int spufs_rmdir(struct inode *parent, struct dentry *dir)
 	return simple_rmdir(parent, dir);
 }
 
-static int spufs_fill_dir(struct dentry *dir, struct tree_descr *files,
+static int spufs_fill_dir(struct dentry *dir, struct spufs_tree_descr *files,
 			  int mode, struct spu_context *ctx)
 {
 	struct dentry *dentry, *tmp;
@@ -189,7 +199,7 @@ static int spufs_fill_dir(struct dentry *dir, struct tree_descr *files,
 		if (!dentry)
 			goto out;
 		ret = spufs_new_file(dir->d_sb, dentry, files->ops,
-					files->mode & mode, ctx);
+					files->mode & mode, files->size, ctx);
 		if (ret)
 			goto out;
 		files++;
@@ -279,6 +289,13 @@ spufs_mkdir(struct inode *dir, struct dentry *dentry, unsigned int flags,
 	if (ret)
 		goto out_free_ctx;
 
+	if (spufs_get_sb_info(dir->i_sb)->debug)
+		ret = spufs_fill_dir(dentry, spufs_dir_debug_contents,
+				mode, ctx);
+
+	if (ret)
+		goto out_free_ctx;
+
 	d_instantiate(dentry, inode);
 	dget(dentry);
 	dir->i_nlink++;
@@ -639,18 +656,19 @@ out:
 
 /* File system initialization */
 enum {
-	Opt_uid, Opt_gid, Opt_mode, Opt_err,
+	Opt_uid, Opt_gid, Opt_mode, Opt_debug, Opt_err,
 };
 
 static match_table_t spufs_tokens = {
-	{ Opt_uid,  "uid=%d" },
-	{ Opt_gid,  "gid=%d" },
-	{ Opt_mode, "mode=%o" },
-	{ Opt_err,   NULL  },
+	{ Opt_uid,   "uid=%d" },
+	{ Opt_gid,   "gid=%d" },
+	{ Opt_mode,  "mode=%o" },
+	{ Opt_debug, "debug" },
+	{ Opt_err,    NULL  },
 };
 
 static int
-spufs_parse_options(char *options, struct inode *root)
+spufs_parse_options(struct super_block *sb, char *options, struct inode *root)
 {
 	char *p;
 	substring_t args[MAX_OPT_ARGS];
@@ -678,6 +696,9 @@ spufs_parse_options(char *options, struct inode *root)
 				return 0;
 			root->i_mode = option | S_IFDIR;
 			break;
+		case Opt_debug:
+			spufs_get_sb_info(sb)->debug = 1;
+			break;
 		default:
 			return 0;
 		}
@@ -736,7 +757,7 @@ spufs_create_root(struct super_block *sb, void *data)
 	SPUFS_I(inode)->i_ctx = NULL;
 
 	ret = -EINVAL;
-	if (!spufs_parse_options(data, inode))
+	if (!spufs_parse_options(sb, data, inode))
 		goto out_iput;
 
 	ret = -ENOMEM;
@@ -754,6 +775,7 @@ out:
 static int
 spufs_fill_super(struct super_block *sb, void *data, int silent)
 {
+	struct spufs_sb_info *info;
 	static struct super_operations s_ops = {
 		.alloc_inode = spufs_alloc_inode,
 		.destroy_inode = spufs_destroy_inode,
@@ -765,11 +787,16 @@ spufs_fill_super(struct super_block *sb, void *data, int silent)
 
 	save_mount_options(sb, data);
 
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
 	sb->s_maxbytes = MAX_LFS_FILESIZE;
 	sb->s_blocksize = PAGE_CACHE_SIZE;
 	sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
 	sb->s_magic = SPUFS_MAGIC;
 	sb->s_op = &s_ops;
+	sb->s_fs_info = info;
 
 	return spufs_create_root(sb, data);
 }
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index e929e70a84e3..2deeeba7eccf 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -312,11 +312,28 @@ static struct spu *aff_ref_location(struct spu_context *ctx, int mem_aff,
 	 */
 	node = cpu_to_node(raw_smp_processor_id());
 	for (n = 0; n < MAX_NUMNODES; n++, node++) {
+		int available_spus;
+
 		node = (node < MAX_NUMNODES) ? node : 0;
 		if (!node_allowed(ctx, node))
 			continue;
+
+		available_spus = 0;
 		mutex_lock(&cbe_spu_info[node].list_mutex);
 		list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
+			if (spu->ctx && spu->ctx->gang
+					&& spu->ctx->aff_offset == 0)
+				available_spus -=
+					(spu->ctx->gang->contexts - 1);
+			else
+				available_spus++;
+		}
+		if (available_spus < ctx->gang->contexts) {
+			mutex_unlock(&cbe_spu_info[node].list_mutex);
+			continue;
+		}
+
+		list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) {
 			if ((!mem_aff || spu->has_mem_affinity) &&
 							sched_spu(spu)) {
 				mutex_unlock(&cbe_spu_info[node].list_mutex);
@@ -389,6 +406,9 @@ static int has_affinity(struct spu_context *ctx)
 	if (list_empty(&ctx->aff_list))
 		return 0;
 
+	if (atomic_read(&ctx->gang->aff_sched_count) == 0)
+		ctx->gang->aff_ref_spu = NULL;
+
 	if (!gang->aff_ref_spu) {
 		if (!(gang->aff_flags & AFF_MERGED))
 			aff_merge_remaining_ctxs(gang);
@@ -416,14 +436,8 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
  	if (spu->ctx->flags & SPU_CREATE_NOSCHED)
 		atomic_dec(&cbe_spu_info[spu->node].reserved_spus);
 
-	if (ctx->gang){
-		mutex_lock(&ctx->gang->aff_mutex);
-		if (has_affinity(ctx)) {
-			if (atomic_dec_and_test(&ctx->gang->aff_sched_count))
-				ctx->gang->aff_ref_spu = NULL;
-		}
-		mutex_unlock(&ctx->gang->aff_mutex);
-	}
+	if (ctx->gang)
+		atomic_dec_if_positive(&ctx->gang->aff_sched_count);
 
 	spu_switch_notify(spu, NULL);
 	spu_unmap_mappings(ctx);
@@ -562,10 +576,7 @@ static struct spu *spu_get_idle(struct spu_context *ctx)
 				goto found;
 			mutex_unlock(&cbe_spu_info[node].list_mutex);
 
-			mutex_lock(&ctx->gang->aff_mutex);
-			if (atomic_dec_and_test(&ctx->gang->aff_sched_count))
-				ctx->gang->aff_ref_spu = NULL;
-			mutex_unlock(&ctx->gang->aff_mutex);
+			atomic_dec(&ctx->gang->aff_sched_count);
 			goto not_found;
 		}
 		mutex_unlock(&ctx->gang->aff_mutex);
@@ -899,7 +910,8 @@ static noinline void spusched_tick(struct spu_context *ctx)
 			spu_add_to_rq(ctx);
 	} else {
 		spu_context_nospu_trace(spusched_tick__newslice, ctx);
-		ctx->time_slice++;
+		if (!ctx->time_slice)
+			ctx->time_slice++;
 	}
 out:
 	spu_release(ctx);
@@ -993,6 +1005,7 @@ void spuctx_switch_state(struct spu_context *ctx,
 	struct timespec ts;
 	struct spu *spu;
 	enum spu_utilization_state old_state;
+	int node;
 
 	ktime_get_ts(&ts);
 	curtime = timespec_to_ns(&ts);
@@ -1014,6 +1027,11 @@ void spuctx_switch_state(struct spu_context *ctx,
 		spu->stats.times[old_state] += delta;
 		spu->stats.util_state = new_state;
 		spu->stats.tstamp = curtime;
+		node = spu->node;
+		if (old_state == SPU_UTIL_USER)
+			atomic_dec(&cbe_spu_info[node].busy_spus);
+		if (new_state == SPU_UTIL_USER);
+			atomic_inc(&cbe_spu_info[node].busy_spus);
 	}
 }
 
diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h
index 454c277c1457..8ae8ef9dfc22 100644
--- a/arch/powerpc/platforms/cell/spufs/spufs.h
+++ b/arch/powerpc/platforms/cell/spufs/spufs.h
@@ -32,6 +32,13 @@
 #include <asm/spu_csa.h>
 #include <asm/spu_info.h>
 
+#define SPUFS_PS_MAP_SIZE	0x20000
+#define SPUFS_MFC_MAP_SIZE	0x1000
+#define SPUFS_CNTL_MAP_SIZE	0x1000
+#define SPUFS_CNTL_MAP_SIZE	0x1000
+#define SPUFS_SIGNAL_MAP_SIZE	PAGE_SIZE
+#define SPUFS_MSS_MAP_SIZE	0x1000
+
 /* The magic number for our file system */
 enum {
 	SPUFS_MAGIC = 0x23c9b64e,
@@ -228,8 +235,16 @@ struct spufs_inode_info {
 #define SPUFS_I(inode) \
 	container_of(inode, struct spufs_inode_info, vfs_inode)
 
-extern struct tree_descr spufs_dir_contents[];
-extern struct tree_descr spufs_dir_nosched_contents[];
+struct spufs_tree_descr {
+	const char *name;
+	const struct file_operations *ops;
+	int mode;
+	size_t size;
+};
+
+extern struct spufs_tree_descr spufs_dir_contents[];
+extern struct spufs_tree_descr spufs_dir_nosched_contents[];
+extern struct spufs_tree_descr spufs_dir_debug_contents[];
 
 /* system call implementation */
 extern struct spufs_calls spufs_calls;
diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c
index 53202422ba72..92d20e993ede 100644
--- a/arch/powerpc/platforms/cell/spufs/sputrace.c
+++ b/arch/powerpc/platforms/cell/spufs/sputrace.c
@@ -182,10 +182,10 @@ struct spu_probe spu_probes[] = {
 	{ "spu_yield__enter", "ctx %p", spu_context_nospu_event },
 	{ "spu_deactivate__enter", "ctx %p", spu_context_nospu_event },
 	{ "__spu_deactivate__unload", "ctx %p spu %p", spu_context_event },
-	{ "spufs_ps_nopfn__enter", "ctx %p", spu_context_nospu_event },
-	{ "spufs_ps_nopfn__sleep", "ctx %p", spu_context_nospu_event },
-	{ "spufs_ps_nopfn__wake", "ctx %p spu %p", spu_context_event },
-	{ "spufs_ps_nopfn__insert", "ctx %p spu %p", spu_context_event },
+	{ "spufs_ps_fault__enter", "ctx %p", spu_context_nospu_event },
+	{ "spufs_ps_fault__sleep", "ctx %p", spu_context_nospu_event },
+	{ "spufs_ps_fault__wake", "ctx %p spu %p", spu_context_event },
+	{ "spufs_ps_fault__insert", "ctx %p spu %p", spu_context_event },
 	{ "spu_acquire_saved__enter", "ctx %p", spu_context_nospu_event },
 	{ "destroy_spu_context__enter", "ctx %p", spu_context_nospu_event },
 	{ "spufs_stop_callback__enter", "ctx %p spu %p", spu_context_event },
@@ -196,8 +196,7 @@ static int __init sputrace_init(void)
 	struct proc_dir_entry *entry;
 	int i, error = -ENOMEM;
 
-	sputrace_log = kcalloc(sizeof(struct sputrace),
-				bufsize, GFP_KERNEL);
+	sputrace_log = kcalloc(bufsize, sizeof(struct sputrace), GFP_KERNEL);
 	if (!sputrace_log)
 		goto out;
 
diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c
index 609c46db4a1b..768c262b9368 100644
--- a/arch/powerpc/platforms/chrp/pci.c
+++ b/arch/powerpc/platforms/chrp/pci.c
@@ -367,7 +367,7 @@ static void chrp_pci_fixup_vt8231_ata(struct pci_dev *viaide)
 	viaisa = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL);
 	if (!viaisa)
 		return;
-	printk("Fixing VIA IDE, force legacy mode on '%s'\n", viaide->dev.bus_id);
+	dev_info(&viaide->dev, "Fixing VIA IDE, force legacy mode on\n");
 
 	pci_read_config_byte(viaide, PCI_CLASS_PROG, &progif);
 	pci_write_config_byte(viaide, PCI_CLASS_PROG, progif & ~0x5);
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c
index 116babbaaf81..1ba7ce5aafae 100644
--- a/arch/powerpc/platforms/chrp/setup.c
+++ b/arch/powerpc/platforms/chrp/setup.c
@@ -63,13 +63,6 @@ static struct mpic *chrp_mpic;
 DEFINE_PER_CPU(struct timer_list, heartbeat_timer);
 unsigned long event_scan_interval;
 
-/*
- * XXX this should be in xmon.h, but putting it there means xmon.h
- * has to include <linux/interrupt.h> (to get irqreturn_t), which
- * causes all sorts of problems.  -- paulus
- */
-extern irqreturn_t xmon_irq(int, void *);
-
 extern unsigned long loops_per_jiffy;
 
 /* To be replaced by RTAS when available */
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 429088967813..4f9f8184d164 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -59,6 +59,16 @@ config PPC_PRPMC2800
 	help
 	  This option enables support for the Motorola PrPMC2800 board
 
+config PPC_C2K
+	bool "SBS/GEFanuc C2K board"
+	depends on EMBEDDED6xx
+	select MV64X60
+	select NOT_COHERENT_CACHE
+	select MTD_CFI_I4
+	help
+	  This option enables support for the GE Fanuc C2K board (formerly
+	  an SBS board).
+
 config TSI108_BRIDGE
 	bool
 	select PCI
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
index 06524d3ffd2e..0773c08bd444 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_LINKSTATION)	+= linkstation.o ls_uart.o
 obj-$(CONFIG_STORCENTER)	+= storcenter.o
 obj-$(CONFIG_PPC_HOLLY)		+= holly.o
 obj-$(CONFIG_PPC_PRPMC2800)	+= prpmc2800.o
+obj-$(CONFIG_PPC_C2K)		+= c2k.o
diff --git a/arch/powerpc/platforms/embedded6xx/c2k.c b/arch/powerpc/platforms/embedded6xx/c2k.c
new file mode 100644
index 000000000000..d0b25b8c39d1
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/c2k.c
@@ -0,0 +1,158 @@
+/*
+ * Board setup routines for the GEFanuc C2K board
+ *
+ * Author: Remi Machet <rmachet@slac.stanford.edu>
+ *
+ * Originated from prpmc2800.c
+ *
+ * 2008 (c) Stanford University
+ * 2007 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/seq_file.h>
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/kexec.h>
+
+#include <asm/machdep.h>
+#include <asm/prom.h>
+#include <asm/system.h>
+#include <asm/time.h>
+
+#include <mm/mmu_decl.h>
+
+#include <sysdev/mv64x60.h>
+
+#define MV64x60_MPP_CNTL_0	0x0000
+#define MV64x60_MPP_CNTL_2	0x0008
+
+#define MV64x60_GPP_IO_CNTL	0x0000
+#define MV64x60_GPP_LEVEL_CNTL	0x0010
+#define MV64x60_GPP_VALUE_SET	0x0018
+
+static void __iomem *mv64x60_mpp_reg_base;
+static void __iomem *mv64x60_gpp_reg_base;
+
+static void __init c2k_setup_arch(void)
+{
+	struct device_node *np;
+	phys_addr_t paddr;
+	const unsigned int *reg;
+
+	/*
+	 * ioremap mpp and gpp registers in case they are later
+	 * needed by c2k_reset_board().
+	 */
+	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-mpp");
+	reg = of_get_property(np, "reg", NULL);
+	paddr = of_translate_address(np, reg);
+	of_node_put(np);
+	mv64x60_mpp_reg_base = ioremap(paddr, reg[1]);
+
+	np = of_find_compatible_node(NULL, NULL, "marvell,mv64360-gpp");
+	reg = of_get_property(np, "reg", NULL);
+	paddr = of_translate_address(np, reg);
+	of_node_put(np);
+	mv64x60_gpp_reg_base = ioremap(paddr, reg[1]);
+
+#ifdef CONFIG_PCI
+	mv64x60_pci_init();
+#endif
+}
+
+static void c2k_reset_board(void)
+{
+	u32 temp;
+
+	local_irq_disable();
+
+	temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0);
+	temp &= 0xFFFF0FFF;
+	out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_0, temp);
+
+	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
+	temp |= 0x00000004;
+	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
+
+	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
+	temp |= 0x00000004;
+	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
+
+	temp = in_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2);
+	temp &= 0xFFFF0FFF;
+	out_le32(mv64x60_mpp_reg_base + MV64x60_MPP_CNTL_2, temp);
+
+	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL);
+	temp |= 0x00080000;
+	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_LEVEL_CNTL, temp);
+
+	temp = in_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL);
+	temp |= 0x00080000;
+	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_IO_CNTL, temp);
+
+	out_le32(mv64x60_gpp_reg_base + MV64x60_GPP_VALUE_SET, 0x00080004);
+}
+
+static void c2k_restart(char *cmd)
+{
+	c2k_reset_board();
+	msleep(100);
+	panic("restart failed\n");
+}
+
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define COHERENCY_SETTING "off"
+#else
+#define COHERENCY_SETTING "on"
+#endif
+
+void c2k_show_cpuinfo(struct seq_file *m)
+{
+	uint memsize = total_memory;
+
+	seq_printf(m, "Vendor\t\t: GEFanuc\n");
+	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+	seq_printf(m, "coherency\t: %s\n", COHERENCY_SETTING);
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init c2k_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (!of_flat_dt_is_compatible(root, "GEFanuc,C2K"))
+		return 0;
+
+	printk(KERN_INFO "Detected a GEFanuc C2K board\n");
+
+	_set_L2CR(0);
+	_set_L2CR(L2CR_L2E | L2CR_L2PE | L2CR_L2I);
+	return 1;
+}
+
+define_machine(c2k) {
+	.name			= "C2K",
+	.probe			= c2k_probe,
+	.setup_arch		= c2k_setup_arch,
+	.init_early		= mv64x60_init_early,
+	.show_cpuinfo		= c2k_show_cpuinfo,
+	.init_IRQ		= mv64x60_init_irq,
+	.get_irq		= mv64x60_get_irq,
+	.restart		= c2k_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+#ifdef CONFIG_KEXEC
+	.machine_kexec		= default_machine_kexec,
+	.machine_kexec_prepare	= default_machine_kexec_prepare,
+	.machine_crash_shutdown	= default_machine_crash_shutdown,
+#endif
+};
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index afc9141be63e..ef74a0763ec1 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -51,15 +51,13 @@ u8 uli_pirq_to_irq[8] = {
 	ULI_8259_NONE,		/* PIRQH */
 };
 
-/* set in board code if you want this quirks to do something */
-int uses_fsl_uli_m1575;
-
 /* Bridge */
 static void __devinit early_uli5249(struct pci_dev *dev)
 {
 	unsigned char temp;
 
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO |
@@ -82,7 +80,8 @@ static void __devinit quirk_uli1575(struct pci_dev *dev)
 {
 	int i;
 
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	/*
@@ -150,7 +149,8 @@ static void __devinit quirk_final_uli1575(struct pci_dev *dev)
 	 * IRQ 14: Edge
 	 * IRQ 15: Edge
 	 */
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	outb(0xfa, 0x4d0);
@@ -176,7 +176,8 @@ static void __devinit quirk_uli5288(struct pci_dev *dev)
 	unsigned char c;
 	unsigned int d;
 
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	/* read/write lock */
@@ -200,7 +201,8 @@ static void __devinit quirk_uli5229(struct pci_dev *dev)
 {
 	unsigned short temp;
 
-	if (!uses_fsl_uli_m1575)
+	if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+			!machine_is(mpc8572_ds))
 		return;
 
 	pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE |
@@ -221,7 +223,7 @@ static void __devinit quirk_final_uli5249(struct pci_dev *dev)
 	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
 		if ((bus->resource[i]) &&
 			(bus->resource[i]->flags & IORESOURCE_MEM)) {
-			dummy = ioremap(bus->resource[i]->start, 0x4);
+			dummy = ioremap(bus->resource[i]->end - 3, 0x4);
 			if (dummy) {
 				in_8(dummy);
 				iounmap(dummy);
@@ -238,6 +240,103 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575);
 
+static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
+{
+	u32 temp32;
+
+	if (!machine_is(mpc86xx_hpcd))
+		return;
+
+	/* Disable INTx */
+	pci_read_config_dword(dev, 0x48, &temp32);
+	pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
+
+	/* Enable sideband interrupt */
+	pci_read_config_dword(dev, 0x90, &temp32);
+	pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
+}
+
+static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev)
+{
+	unsigned char c;
+	unsigned short temp;
+
+	if (!machine_is(mpc86xx_hpcd))
+		return;
+
+	/* Interrupt Disable, Needed when SATA disabled */
+	pci_read_config_word(dev, PCI_COMMAND, &temp);
+	temp |= 1<<10;
+	pci_write_config_word(dev, PCI_COMMAND, temp);
+
+	pci_read_config_byte(dev, 0x83, &c);
+	c |= 0x80;
+	pci_write_config_byte(dev, 0x83, c);
+
+	pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
+	pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
+
+	pci_read_config_byte(dev, 0x83, &c);
+	c &= 0x7f;
+	pci_write_config_byte(dev, 0x83, c);
+}
+
+/*
+ * Since 8259PIC was disabled on the board, the IDE device can not
+ * use the legacy IRQ, we need to let the IDE device work under
+ * native mode and use the interrupt line like other PCI devices.
+ * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
+ * as the interrupt for IDE device.
+ */
+static void __devinit hpcd_quirk_uli5229(struct pci_dev *dev)
+{
+	unsigned char c;
+
+	if (!machine_is(mpc86xx_hpcd))
+		return;
+
+	pci_read_config_byte(dev, 0x4b, &c);
+	c |= 0x10;
+	pci_write_config_byte(dev, 0x4b, c);
+}
+
+/*
+ * SATA interrupt pin bug fix
+ * There's a chip bug for 5288, The interrupt pin should be 2,
+ * not the read only value 1, So it use INTB#, not INTA# which
+ * actually used by the IDE device 5229.
+ * As of this bug, during the PCI initialization, 5288 read the
+ * irq of IDE device from the device tree, this function fix this
+ * bug by re-assigning a correct irq to 5288.
+ *
+ */
+static void __devinit hpcd_final_uli5288(struct pci_dev *dev)
+{
+	struct pci_controller *hose = pci_bus_to_host(dev->bus);
+	struct device_node *hosenode = hose ? hose->dn : NULL;
+	struct of_irq oirq;
+	int virq, pin = 2;
+	u32 laddr[3];
+
+	if (!machine_is(mpc86xx_hpcd))
+		return;
+
+	if (!hosenode)
+		return;
+
+	laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
+	laddr[1] = laddr[2] = 0;
+	of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
+	virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+				     oirq.size);
+	dev->irq = virq;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, hpcd_quirk_uli1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, hpcd_quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, hpcd_quirk_uli5229);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288);
+
 int uli_exclude_device(struct pci_controller *hose,
 			u_char bus, u_char devfn)
 {
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index 761d9e971fc4..ea3e541ac74f 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -2,6 +2,7 @@ config PPC_ISERIES
 	bool "IBM Legacy iSeries"
 	depends on PPC_MULTIPLATFORM && PPC64
 	select PPC_INDIRECT_IO
+	select PPC_PCI_CHOICE if EMBEDDED
 
 menu "iSeries device drivers"
 	depends on PPC_ISERIES
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index 11fa3c772ed5..bb464d1211b2 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -41,8 +41,9 @@
 #include <asm/iseries/hv_call_event.h>
 #include <asm/iseries/iommu.h>
 
-static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
-		unsigned long uaddr, enum dma_data_direction direction)
+static int tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
+		unsigned long uaddr, enum dma_data_direction direction,
+		struct dma_attrs *attrs)
 {
 	u64 rc;
 	u64 tce, rpn;
@@ -70,6 +71,7 @@ static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages,
 		index++;
 		uaddr += TCE_PAGE_SIZE;
 	}
+	return 0;
 }
 
 static void tce_free_iSeries(struct iommu_table *tbl, long index, long npages)
@@ -214,13 +216,13 @@ dma_addr_t iseries_hv_map(void *vaddr, size_t size,
 			enum dma_data_direction direction)
 {
 	return iommu_map_single(NULL, &vio_iommu_table, vaddr, size,
-				DMA_32BIT_MASK, direction);
+				DMA_32BIT_MASK, direction, NULL);
 }
 
 void iseries_hv_unmap(dma_addr_t dma_handle, size_t size,
 			enum dma_data_direction direction)
 {
-	iommu_unmap_single(&vio_iommu_table, dma_handle, size, direction);
+	iommu_unmap_single(&vio_iommu_table, dma_handle, size, direction, NULL);
 }
 
 void __init iommu_vio_init(void)
diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c
index 1dc7295746da..731d7b157749 100644
--- a/arch/powerpc/platforms/iseries/mf.c
+++ b/arch/powerpc/platforms/iseries/mf.c
@@ -871,7 +871,7 @@ static int proc_mf_dump_cmdline(char *page, char **start, off_t off,
 		count = 256 - off;
 
 	dma_addr = iseries_hv_map(page, off + count, DMA_FROM_DEVICE);
-	if (dma_mapping_error(dma_addr))
+	if (dma_mapping_error(NULL, dma_addr))
 		return -ENOMEM;
 	memset(page, 0, off + count);
 	memset(&vsp_cmd, 0, sizeof(vsp_cmd));
diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c
index b72120751bbe..70b688c1aefb 100644
--- a/arch/powerpc/platforms/iseries/setup.c
+++ b/arch/powerpc/platforms/iseries/setup.c
@@ -561,7 +561,7 @@ static void yield_shared_processor(void)
 static void iseries_shared_idle(void)
 {
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched() && !hvlpevent_is_pending()) {
 			local_irq_disable();
 			ppc64_runlatch_off();
@@ -591,7 +591,7 @@ static void iseries_dedicated_idle(void)
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		if (!need_resched()) {
 			while (!need_resched()) {
 				ppc64_runlatch_off();
diff --git a/arch/powerpc/platforms/maple/time.c b/arch/powerpc/platforms/maple/time.c
index 9f7579b38c72..53bca132fb48 100644
--- a/arch/powerpc/platforms/maple/time.c
+++ b/arch/powerpc/platforms/maple/time.c
@@ -41,8 +41,6 @@
 #define DBG(x...)
 #endif
 
-extern void GregorianDay(struct rtc_time * tm);
-
 static int maple_rtc_addr;
 
 static int maple_clock_read(int addr)
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index 86967bdd8774..a0ff03a3d8da 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -83,9 +83,10 @@ static u32 *iob_l2_base;
 static struct iommu_table iommu_table_iobmap;
 static int iommu_table_iobmap_inited;
 
-static void iobmap_build(struct iommu_table *tbl, long index,
+static int iobmap_build(struct iommu_table *tbl, long index,
 			 long npages, unsigned long uaddr,
-			 enum dma_data_direction direction)
+			 enum dma_data_direction direction,
+			 struct dma_attrs *attrs)
 {
 	u32 *ip;
 	u32 rpn;
@@ -107,6 +108,7 @@ static void iobmap_build(struct iommu_table *tbl, long index,
 		uaddr += IOBMAP_PAGE_SIZE;
 		bus_addr += IOBMAP_PAGE_SIZE;
 	}
+	return 0;
 }
 
 
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index 89774177b209..58ecdd72630f 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -7,7 +7,7 @@ endif
 
 obj-y				+= pic.o setup.o time.o feature.o pci.o \
 				   sleep.o low_i2c.o cache.o pfunc_core.o \
-				   pfunc_base.o
+				   pfunc_base.o udbg_scc.o udbg_adb.o
 obj-$(CONFIG_PMAC_BACKLIGHT)	+= backlight.o
 obj-$(CONFIG_CPU_FREQ_PMAC)	+= cpufreq_32.o
 obj-$(CONFIG_CPU_FREQ_PMAC64)	+= cpufreq_64.o
@@ -19,4 +19,3 @@ obj-$(CONFIG_NVRAM:m=y)		+= nvram.o
 obj-$(CONFIG_PPC64)		+= nvram.o
 obj-$(CONFIG_PPC32)		+= bootx_init.o
 obj-$(CONFIG_SMP)		+= smp.o
-obj-$(CONFIG_PPC_MERGE)		+= udbg_scc.o udbg_adb.o
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index 829b8b02527b..6d149ae8ffa7 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -34,16 +34,10 @@
 #include <asm/time.h>
 #include <asm/pmac_feature.h>
 #include <asm/mpic.h>
+#include <asm/xmon.h>
 
 #include "pmac.h"
 
-/*
- * XXX this should be in xmon.h, but putting it there means xmon.h
- * has to include <linux/interrupt.h> (to get irqreturn_t), which
- * causes all sorts of problems.  -- paulus
- */
-extern irqreturn_t xmon_irq(int, void *);
-
 #ifdef CONFIG_PPC32
 struct pmac_irq_hw {
         unsigned int    event;
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index 00bd0166d07f..88ccf3a08a9c 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -97,8 +97,6 @@ extern struct machdep_calls pmac_md;
 int sccdbg;
 #endif
 
-extern void zs_kgdb_hook(int tty_num);
-
 sys_ctrler_t sys_ctrler = SYS_CTRLER_UNKNOWN;
 EXPORT_SYMBOL(sys_ctrler);
 
@@ -329,10 +327,6 @@ static void __init pmac_setup_arch(void)
 	l2cr_init();
 #endif /* CONFIG_PPC32 */
 
-#ifdef CONFIG_KGDB
-	zs_kgdb_hook(0);
-#endif
-
 	find_via_cuda();
 	find_via_pmu();
 	smu_init();
@@ -547,6 +541,78 @@ static int __init pmac_declare_of_platform_devices(void)
 }
 machine_device_initcall(powermac, pmac_declare_of_platform_devices);
 
+#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
+/*
+ * This is called very early, as part of console_init() (typically just after
+ * time_init()). This function is respondible for trying to find a good
+ * default console on serial ports. It tries to match the open firmware
+ * default output with one of the available serial console drivers.
+ */
+static int __init check_pmac_serial_console(void)
+{
+	struct device_node *prom_stdout = NULL;
+	int offset = 0;
+	const char *name;
+#ifdef CONFIG_SERIAL_PMACZILOG_TTYS
+	char *devname = "ttyS";
+#else
+	char *devname = "ttyPZ";
+#endif
+
+	pr_debug(" -> check_pmac_serial_console()\n");
+
+	/* The user has requested a console so this is already set up. */
+	if (strstr(boot_command_line, "console=")) {
+		pr_debug(" console was specified !\n");
+		return -EBUSY;
+	}
+
+	if (!of_chosen) {
+		pr_debug(" of_chosen is NULL !\n");
+		return -ENODEV;
+	}
+
+	/* We are getting a weird phandle from OF ... */
+	/* ... So use the full path instead */
+	name = of_get_property(of_chosen, "linux,stdout-path", NULL);
+	if (name == NULL) {
+		pr_debug(" no linux,stdout-path !\n");
+		return -ENODEV;
+	}
+	prom_stdout = of_find_node_by_path(name);
+	if (!prom_stdout) {
+		pr_debug(" can't find stdout package %s !\n", name);
+		return -ENODEV;
+	}
+	pr_debug("stdout is %s\n", prom_stdout->full_name);
+
+	name = of_get_property(prom_stdout, "name", NULL);
+	if (!name) {
+		pr_debug(" stdout package has no name !\n");
+		goto not_found;
+	}
+
+	if (strcmp(name, "ch-a") == 0)
+		offset = 0;
+	else if (strcmp(name, "ch-b") == 0)
+		offset = 1;
+	else
+		goto not_found;
+	of_node_put(prom_stdout);
+
+	pr_debug("Found serial console at %s%d\n", devname, offset);
+
+	return add_preferred_console(devname, offset, NULL);
+
+ not_found:
+	pr_debug("No preferred console found !\n");
+	of_node_put(prom_stdout);
+	return -ENODEV;
+}
+console_initcall(check_pmac_serial_console);
+
+#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
+
 /*
  * Called very early, MMU is off, device-tree isn't unflattened
  */
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index cb2d894541c6..4ae3d00e0bdd 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -36,6 +36,7 @@
 
 #include <asm/ptrace.h>
 #include <asm/atomic.h>
+#include <asm/code-patching.h>
 #include <asm/irq.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
@@ -786,8 +787,7 @@ static void __devinit smp_core99_kick_cpu(int nr)
 {
 	unsigned int save_vector;
 	unsigned long target, flags;
-	volatile unsigned int *vector
-		 = ((volatile unsigned int *)(KERNELBASE+0x100));
+	unsigned int *vector = (unsigned int *)(KERNELBASE+0x100);
 
 	if (nr < 0 || nr > 3)
 		return;
@@ -804,7 +804,7 @@ static void __devinit smp_core99_kick_cpu(int nr)
 	 *   b __secondary_start_pmac_0 + nr*8 - KERNELBASE
 	 */
 	target = (unsigned long) __secondary_start_pmac_0 + nr * 8;
-	create_branch((unsigned long)vector, target, BRANCH_SET_LINK);
+	patch_branch(vector, target, BRANCH_SET_LINK);
 
 	/* Put some life in our friend */
 	pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c
index 47de4d3fc167..572771fd8463 100644
--- a/arch/powerpc/platforms/powermac/udbg_scc.c
+++ b/arch/powerpc/platforms/powermac/udbg_scc.c
@@ -125,13 +125,23 @@ void udbg_scc_init(int force_scc)
 	out_8(sccc, 0xc0);
 
 	/* If SCC was the OF output port, read the BRG value, else
-	 * Setup for 57600 8N1
+	 * Setup for 38400 or 57600 8N1 depending on the machine
 	 */
 	if (ch_def != NULL) {
 		out_8(sccc, 13);
 		scc_inittab[1] = in_8(sccc);
 		out_8(sccc, 12);
 		scc_inittab[3] = in_8(sccc);
+	} else if (machine_is_compatible("RackMac1,1")
+		   || machine_is_compatible("RackMac1,2")
+		   || machine_is_compatible("MacRISC4")) {
+		/* Xserves and G5s default to 57600 */
+		scc_inittab[1] = 0;
+		scc_inittab[3] = 0;
+	} else {
+		/* Others default to 38400 */
+		scc_inittab[1] = 0;
+		scc_inittab[3] = 1;
 	}
 
 	for (i = 0; i < sizeof(scc_inittab); ++i)
diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig
index a5f4e95dfc3d..920cf7a454b1 100644
--- a/arch/powerpc/platforms/ps3/Kconfig
+++ b/arch/powerpc/platforms/ps3/Kconfig
@@ -8,6 +8,7 @@ config PPC_PS3
 	select USB_ARCH_HAS_EHCI
 	select USB_EHCI_BIG_ENDIAN_MMIO
 	select MEMORY_HOTPLUG
+	select PPC_PCI_CHOICE
 	help
 	  This option enables support for the Sony PS3 game console
 	  and other platforms using the PS3 hypervisor.  Enabling this
diff --git a/arch/powerpc/platforms/ps3/device-init.c b/arch/powerpc/platforms/ps3/device-init.c
index 3866debfa3c4..ffdd8e963fbd 100644
--- a/arch/powerpc/platforms/ps3/device-init.c
+++ b/arch/powerpc/platforms/ps3/device-init.c
@@ -486,6 +486,7 @@ static int __init ps3_register_graphics_devices(void)
 		return -ENOMEM;
 
 	p->dev.match_id = PS3_MATCH_ID_GRAPHICS;
+	p->dev.match_sub_id = PS3_MATCH_SUB_ID_FB;
 	p->dev.dev_type = PS3_DEVICE_TYPE_IOC0;
 
 	result = ps3_system_bus_device_register(&p->dev);
diff --git a/arch/powerpc/platforms/ps3/smp.c b/arch/powerpc/platforms/ps3/smp.c
index f0b12f212363..a0927a3bacb7 100644
--- a/arch/powerpc/platforms/ps3/smp.c
+++ b/arch/powerpc/platforms/ps3/smp.c
@@ -105,9 +105,10 @@ static void __init ps3_smp_setup_cpu(int cpu)
 	 * to index needs to be setup.
 	 */
 
-	BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION  != 0);
-	BUILD_BUG_ON(PPC_MSG_RESCHEDULE     != 1);
-	BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK != 3);
+	BUILD_BUG_ON(PPC_MSG_CALL_FUNCTION    != 0);
+	BUILD_BUG_ON(PPC_MSG_RESCHEDULE       != 1);
+	BUILD_BUG_ON(PPC_MSG_CALL_FUNC_SINGLE != 2);
+	BUILD_BUG_ON(PPC_MSG_DEBUGGER_BREAK   != 3);
 
 	for (i = 0; i < MSG_COUNT; i++) {
 		result = ps3_event_receive_port_setup(cpu, &virqs[i]);
diff --git a/arch/powerpc/platforms/ps3/system-bus.c b/arch/powerpc/platforms/ps3/system-bus.c
index 43c493fca2d0..280ee88cb0b0 100644
--- a/arch/powerpc/platforms/ps3/system-bus.c
+++ b/arch/powerpc/platforms/ps3/system-bus.c
@@ -347,11 +347,23 @@ static int ps3_system_bus_match(struct device *_dev,
 	struct ps3_system_bus_driver *drv = ps3_drv_to_system_bus_drv(_drv);
 	struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
 
-	result = dev->match_id == drv->match_id;
+	if (!dev->match_sub_id)
+		result = dev->match_id == drv->match_id;
+	else
+		result = dev->match_sub_id == drv->match_sub_id &&
+			dev->match_id == drv->match_id;
+
+	if (result)
+		pr_info("%s:%d: dev=%u.%u(%s), drv=%u.%u(%s): match\n",
+			__func__, __LINE__,
+			dev->match_id, dev->match_sub_id, dev->core.bus_id,
+			drv->match_id, drv->match_sub_id, drv->core.name);
+	else
+		pr_debug("%s:%d: dev=%u.%u(%s), drv=%u.%u(%s): miss\n",
+			__func__, __LINE__,
+			dev->match_id, dev->match_sub_id, dev->core.bus_id,
+			drv->match_id, drv->match_sub_id, drv->core.name);
 
-	pr_info("%s:%d: dev=%u(%s), drv=%u(%s): %s\n", __func__, __LINE__,
-		dev->match_id, dev->core.bus_id, drv->match_id, drv->core.name,
-		(result ? "match" : "miss"));
 	return result;
 }
 
@@ -362,7 +374,7 @@ static int ps3_system_bus_probe(struct device *_dev)
 	struct ps3_system_bus_driver *drv;
 
 	BUG_ON(!dev);
-	pr_info(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id);
+	pr_debug(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id);
 
 	drv = ps3_system_bus_dev_to_system_bus_drv(dev);
 	BUG_ON(!drv);
@@ -370,10 +382,10 @@ static int ps3_system_bus_probe(struct device *_dev)
 	if (drv->probe)
 		result = drv->probe(dev);
 	else
-		pr_info("%s:%d: %s no probe method\n", __func__, __LINE__,
+		pr_debug("%s:%d: %s no probe method\n", __func__, __LINE__,
 			dev->core.bus_id);
 
-	pr_info(" <- %s:%d: %s\n", __func__, __LINE__, dev->core.bus_id);
+	pr_debug(" <- %s:%d: %s\n", __func__, __LINE__, dev->core.bus_id);
 	return result;
 }
 
@@ -384,7 +396,7 @@ static int ps3_system_bus_remove(struct device *_dev)
 	struct ps3_system_bus_driver *drv;
 
 	BUG_ON(!dev);
-	pr_info(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id);
+	pr_debug(" -> %s:%d: %s\n", __func__, __LINE__, _dev->bus_id);
 
 	drv = ps3_system_bus_dev_to_system_bus_drv(dev);
 	BUG_ON(!drv);
@@ -395,7 +407,7 @@ static int ps3_system_bus_remove(struct device *_dev)
 		dev_dbg(&dev->core, "%s:%d %s: no remove method\n",
 			__func__, __LINE__, drv->core.name);
 
-	pr_info(" <- %s:%d: %s\n", __func__, __LINE__, dev->core.bus_id);
+	pr_debug(" <- %s:%d: %s\n", __func__, __LINE__, dev->core.bus_id);
 	return result;
 }
 
@@ -550,7 +562,7 @@ static void ps3_free_coherent(struct device *_dev, size_t size, void *vaddr,
  */
 
 static dma_addr_t ps3_sb_map_single(struct device *_dev, void *ptr, size_t size,
-	enum dma_data_direction direction)
+	enum dma_data_direction direction, struct dma_attrs *attrs)
 {
 	struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
 	int result;
@@ -570,7 +582,8 @@ static dma_addr_t ps3_sb_map_single(struct device *_dev, void *ptr, size_t size,
 
 static dma_addr_t ps3_ioc0_map_single(struct device *_dev, void *ptr,
 				      size_t size,
-				      enum dma_data_direction direction)
+				      enum dma_data_direction direction,
+				      struct dma_attrs *attrs)
 {
 	struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
 	int result;
@@ -603,7 +616,7 @@ static dma_addr_t ps3_ioc0_map_single(struct device *_dev, void *ptr,
 }
 
 static void ps3_unmap_single(struct device *_dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
+	size_t size, enum dma_data_direction direction, struct dma_attrs *attrs)
 {
 	struct ps3_system_bus_device *dev = ps3_dev_to_system_bus_dev(_dev);
 	int result;
@@ -617,7 +630,7 @@ static void ps3_unmap_single(struct device *_dev, dma_addr_t dma_addr,
 }
 
 static int ps3_sb_map_sg(struct device *_dev, struct scatterlist *sgl,
-	int nents, enum dma_data_direction direction)
+	int nents, enum dma_data_direction direction, struct dma_attrs *attrs)
 {
 #if defined(CONFIG_PS3_DYNAMIC_DMA)
 	BUG_ON("do");
@@ -646,14 +659,15 @@ static int ps3_sb_map_sg(struct device *_dev, struct scatterlist *sgl,
 
 static int ps3_ioc0_map_sg(struct device *_dev, struct scatterlist *sg,
 			   int nents,
-			   enum dma_data_direction direction)
+			   enum dma_data_direction direction,
+			   struct dma_attrs *attrs)
 {
 	BUG();
 	return 0;
 }
 
 static void ps3_sb_unmap_sg(struct device *_dev, struct scatterlist *sg,
-	int nents, enum dma_data_direction direction)
+	int nents, enum dma_data_direction direction, struct dma_attrs *attrs)
 {
 #if defined(CONFIG_PS3_DYNAMIC_DMA)
 	BUG_ON("do");
@@ -661,7 +675,8 @@ static void ps3_sb_unmap_sg(struct device *_dev, struct scatterlist *sg,
 }
 
 static void ps3_ioc0_unmap_sg(struct device *_dev, struct scatterlist *sg,
-			    int nents, enum dma_data_direction direction)
+			    int nents, enum dma_data_direction direction,
+			    struct dma_attrs *attrs)
 {
 	BUG();
 }
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index 07fe5b69b9e2..97619fd51e39 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -7,6 +7,7 @@ config PPC_PSERIES
 	select RTAS_ERROR_LOGGING
 	select PPC_UDBG_16550
 	select PPC_NATIVE
+	select PPC_PCI_CHOICE if EMBEDDED
 	default y
 
 config PPC_SPLPAR
@@ -39,3 +40,26 @@ config PPC_PSERIES_DEBUG
 	depends on PPC_PSERIES && PPC_EARLY_DEBUG
 	bool "Enable extra debug logging in platforms/pseries"
 	default y
+
+config PPC_SMLPAR
+	bool "Support for shared-memory logical partitions"
+	depends on PPC_PSERIES
+	select LPARCFG
+	default n
+	help
+	  Select this option to enable shared memory partition support.
+	  With this option a system running in an LPAR can be given more
+	  memory than physically available and will allow firmware to
+	  balance memory across many LPARs.
+
+config CMM
+	tristate "Collaborative memory management"
+	depends on PPC_SMLPAR
+	default y
+	help
+	  Select this option, if you want to enable the kernel interface
+	  to reduce the memory size of the system. This is accomplished
+	  by allocating pages of memory and put them "on hold". This only
+	  makes sense for a system running in an LPAR where the unused pages
+	  will be reused for other LPARs. The interface allows firmware to
+	  balance memory across many LPARs.
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 554c6e42ef2a..dfe574af2dc0 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -24,3 +24,4 @@ obj-$(CONFIG_HVC_CONSOLE)	+= hvconsole.o
 obj-$(CONFIG_HVCS)		+= hvcserver.o
 obj-$(CONFIG_HCALL_STATS)	+= hvCall_inst.o
 obj-$(CONFIG_PHYP_DUMP)	+= phyp_dump.o
+obj-$(CONFIG_CMM)		+= cmm.o
diff --git a/arch/powerpc/platforms/pseries/cmm.c b/arch/powerpc/platforms/pseries/cmm.c
new file mode 100644
index 000000000000..38fe32a7cc70
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/cmm.c
@@ -0,0 +1,472 @@
+/*
+ * Collaborative memory management interface.
+ *
+ * Copyright (C) 2008 IBM Corporation
+ * Author(s): Brian King (brking@linux.vnet.ibm.com),
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/oom.h>
+#include <linux/sched.h>
+#include <linux/stringify.h>
+#include <linux/swap.h>
+#include <linux/sysdev.h>
+#include <asm/firmware.h>
+#include <asm/hvcall.h>
+#include <asm/mmu.h>
+#include <asm/pgalloc.h>
+#include <asm/uaccess.h>
+
+#include "plpar_wrappers.h"
+
+#define CMM_DRIVER_VERSION	"1.0.0"
+#define CMM_DEFAULT_DELAY	1
+#define CMM_DEBUG			0
+#define CMM_DISABLE		0
+#define CMM_OOM_KB		1024
+#define CMM_MIN_MEM_MB		256
+#define KB2PAGES(_p)		((_p)>>(PAGE_SHIFT-10))
+#define PAGES2KB(_p)		((_p)<<(PAGE_SHIFT-10))
+
+static unsigned int delay = CMM_DEFAULT_DELAY;
+static unsigned int oom_kb = CMM_OOM_KB;
+static unsigned int cmm_debug = CMM_DEBUG;
+static unsigned int cmm_disabled = CMM_DISABLE;
+static unsigned long min_mem_mb = CMM_MIN_MEM_MB;
+static struct sys_device cmm_sysdev;
+
+MODULE_AUTHOR("Brian King <brking@linux.vnet.ibm.com>");
+MODULE_DESCRIPTION("IBM System p Collaborative Memory Manager");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(CMM_DRIVER_VERSION);
+
+module_param_named(delay, delay, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(delay, "Delay (in seconds) between polls to query hypervisor paging requests. "
+		 "[Default=" __stringify(CMM_DEFAULT_DELAY) "]");
+module_param_named(oom_kb, oom_kb, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(oom_kb, "Amount of memory in kb to free on OOM. "
+		 "[Default=" __stringify(CMM_OOM_KB) "]");
+module_param_named(min_mem_mb, min_mem_mb, ulong, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(min_mem_mb, "Minimum amount of memory (in MB) to not balloon. "
+		 "[Default=" __stringify(CMM_MIN_MEM_MB) "]");
+module_param_named(debug, cmm_debug, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable module debugging logging. Set to 1 to enable. "
+		 "[Default=" __stringify(CMM_DEBUG) "]");
+
+#define CMM_NR_PAGES ((PAGE_SIZE - sizeof(void *) - sizeof(unsigned long)) / sizeof(unsigned long))
+
+#define cmm_dbg(...) if (cmm_debug) { printk(KERN_INFO "cmm: "__VA_ARGS__); }
+
+struct cmm_page_array {
+	struct cmm_page_array *next;
+	unsigned long index;
+	unsigned long page[CMM_NR_PAGES];
+};
+
+static unsigned long loaned_pages;
+static unsigned long loaned_pages_target;
+static unsigned long oom_freed_pages;
+
+static struct cmm_page_array *cmm_page_list;
+static DEFINE_SPINLOCK(cmm_lock);
+
+static struct task_struct *cmm_thread_ptr;
+
+/**
+ * cmm_alloc_pages - Allocate pages and mark them as loaned
+ * @nr:	number of pages to allocate
+ *
+ * Return value:
+ * 	number of pages requested to be allocated which were not
+ **/
+static long cmm_alloc_pages(long nr)
+{
+	struct cmm_page_array *pa, *npa;
+	unsigned long addr;
+	long rc;
+
+	cmm_dbg("Begin request for %ld pages\n", nr);
+
+	while (nr) {
+		addr = __get_free_page(GFP_NOIO | __GFP_NOWARN |
+				       __GFP_NORETRY | __GFP_NOMEMALLOC);
+		if (!addr)
+			break;
+		spin_lock(&cmm_lock);
+		pa = cmm_page_list;
+		if (!pa || pa->index >= CMM_NR_PAGES) {
+			/* Need a new page for the page list. */
+			spin_unlock(&cmm_lock);
+			npa = (struct cmm_page_array *)__get_free_page(GFP_NOIO | __GFP_NOWARN |
+								       __GFP_NORETRY | __GFP_NOMEMALLOC);
+			if (!npa) {
+				pr_info("%s: Can not allocate new page list\n", __FUNCTION__);
+				free_page(addr);
+				break;
+			}
+			spin_lock(&cmm_lock);
+			pa = cmm_page_list;
+
+			if (!pa || pa->index >= CMM_NR_PAGES) {
+				npa->next = pa;
+				npa->index = 0;
+				pa = npa;
+				cmm_page_list = pa;
+			} else
+				free_page((unsigned long) npa);
+		}
+
+		if ((rc = plpar_page_set_loaned(__pa(addr)))) {
+			pr_err("%s: Can not set page to loaned. rc=%ld\n", __FUNCTION__, rc);
+			spin_unlock(&cmm_lock);
+			free_page(addr);
+			break;
+		}
+
+		pa->page[pa->index++] = addr;
+		loaned_pages++;
+		totalram_pages--;
+		spin_unlock(&cmm_lock);
+		nr--;
+	}
+
+	cmm_dbg("End request with %ld pages unfulfilled\n", nr);
+	return nr;
+}
+
+/**
+ * cmm_free_pages - Free pages and mark them as active
+ * @nr:	number of pages to free
+ *
+ * Return value:
+ * 	number of pages requested to be freed which were not
+ **/
+static long cmm_free_pages(long nr)
+{
+	struct cmm_page_array *pa;
+	unsigned long addr;
+
+	cmm_dbg("Begin free of %ld pages.\n", nr);
+	spin_lock(&cmm_lock);
+	pa = cmm_page_list;
+	while (nr) {
+		if (!pa || pa->index <= 0)
+			break;
+		addr = pa->page[--pa->index];
+
+		if (pa->index == 0) {
+			pa = pa->next;
+			free_page((unsigned long) cmm_page_list);
+			cmm_page_list = pa;
+		}
+
+		plpar_page_set_active(__pa(addr));
+		free_page(addr);
+		loaned_pages--;
+		nr--;
+		totalram_pages++;
+	}
+	spin_unlock(&cmm_lock);
+	cmm_dbg("End request with %ld pages unfulfilled\n", nr);
+	return nr;
+}
+
+/**
+ * cmm_oom_notify - OOM notifier
+ * @self:	notifier block struct
+ * @dummy:	not used
+ * @parm:	returned - number of pages freed
+ *
+ * Return value:
+ * 	NOTIFY_OK
+ **/
+static int cmm_oom_notify(struct notifier_block *self,
+			  unsigned long dummy, void *parm)
+{
+	unsigned long *freed = parm;
+	long nr = KB2PAGES(oom_kb);
+
+	cmm_dbg("OOM processing started\n");
+	nr = cmm_free_pages(nr);
+	loaned_pages_target = loaned_pages;
+	*freed += KB2PAGES(oom_kb) - nr;
+	oom_freed_pages += KB2PAGES(oom_kb) - nr;
+	cmm_dbg("OOM processing complete\n");
+	return NOTIFY_OK;
+}
+
+/**
+ * cmm_get_mpp - Read memory performance parameters
+ *
+ * Makes hcall to query the current page loan request from the hypervisor.
+ *
+ * Return value:
+ * 	nothing
+ **/
+static void cmm_get_mpp(void)
+{
+	int rc;
+	struct hvcall_mpp_data mpp_data;
+	unsigned long active_pages_target;
+	signed long page_loan_request;
+
+	rc = h_get_mpp(&mpp_data);
+
+	if (rc != H_SUCCESS)
+		return;
+
+	page_loan_request = div_s64((s64)mpp_data.loan_request, PAGE_SIZE);
+	loaned_pages_target = page_loan_request + loaned_pages;
+	if (loaned_pages_target > oom_freed_pages)
+		loaned_pages_target -= oom_freed_pages;
+	else
+		loaned_pages_target = 0;
+
+	active_pages_target = totalram_pages + loaned_pages - loaned_pages_target;
+
+	if ((min_mem_mb * 1024 * 1024) > (active_pages_target * PAGE_SIZE))
+		loaned_pages_target = totalram_pages + loaned_pages -
+			((min_mem_mb * 1024 * 1024) / PAGE_SIZE);
+
+	cmm_dbg("delta = %ld, loaned = %lu, target = %lu, oom = %lu, totalram = %lu\n",
+		page_loan_request, loaned_pages, loaned_pages_target,
+		oom_freed_pages, totalram_pages);
+}
+
+static struct notifier_block cmm_oom_nb = {
+	.notifier_call = cmm_oom_notify
+};
+
+/**
+ * cmm_thread - CMM task thread
+ * @dummy:	not used
+ *
+ * Return value:
+ * 	0
+ **/
+static int cmm_thread(void *dummy)
+{
+	unsigned long timeleft;
+
+	while (1) {
+		timeleft = msleep_interruptible(delay * 1000);
+
+		if (kthread_should_stop() || timeleft) {
+			loaned_pages_target = loaned_pages;
+			break;
+		}
+
+		cmm_get_mpp();
+
+		if (loaned_pages_target > loaned_pages) {
+			if (cmm_alloc_pages(loaned_pages_target - loaned_pages))
+				loaned_pages_target = loaned_pages;
+		} else if (loaned_pages_target < loaned_pages)
+			cmm_free_pages(loaned_pages - loaned_pages_target);
+	}
+	return 0;
+}
+
+#define CMM_SHOW(name, format, args...)			\
+	static ssize_t show_##name(struct sys_device *dev,	\
+				   struct sysdev_attribute *attr,	\
+				   char *buf)			\
+	{							\
+		return sprintf(buf, format, ##args);		\
+	}							\
+	static SYSDEV_ATTR(name, S_IRUGO, show_##name, NULL)
+
+CMM_SHOW(loaned_kb, "%lu\n", PAGES2KB(loaned_pages));
+CMM_SHOW(loaned_target_kb, "%lu\n", PAGES2KB(loaned_pages_target));
+
+static ssize_t show_oom_pages(struct sys_device *dev,
+			      struct sysdev_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%lu\n", PAGES2KB(oom_freed_pages));
+}
+
+static ssize_t store_oom_pages(struct sys_device *dev,
+			       struct sysdev_attribute *attr,
+			       const char *buf, size_t count)
+{
+	unsigned long val = simple_strtoul (buf, NULL, 10);
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+	if (val != 0)
+		return -EBADMSG;
+
+	oom_freed_pages = 0;
+	return count;
+}
+
+static SYSDEV_ATTR(oom_freed_kb, S_IWUSR| S_IRUGO,
+		   show_oom_pages, store_oom_pages);
+
+static struct sysdev_attribute *cmm_attrs[] = {
+	&attr_loaned_kb,
+	&attr_loaned_target_kb,
+	&attr_oom_freed_kb,
+};
+
+static struct sysdev_class cmm_sysdev_class = {
+	.name = "cmm",
+};
+
+/**
+ * cmm_sysfs_register - Register with sysfs
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int cmm_sysfs_register(struct sys_device *sysdev)
+{
+	int i, rc;
+
+	if ((rc = sysdev_class_register(&cmm_sysdev_class)))
+		return rc;
+
+	sysdev->id = 0;
+	sysdev->cls = &cmm_sysdev_class;
+
+	if ((rc = sysdev_register(sysdev)))
+		goto class_unregister;
+
+	for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++) {
+		if ((rc = sysdev_create_file(sysdev, cmm_attrs[i])))
+			goto fail;
+	}
+
+	return 0;
+
+fail:
+	while (--i >= 0)
+		sysdev_remove_file(sysdev, cmm_attrs[i]);
+	sysdev_unregister(sysdev);
+class_unregister:
+	sysdev_class_unregister(&cmm_sysdev_class);
+	return rc;
+}
+
+/**
+ * cmm_unregister_sysfs - Unregister from sysfs
+ *
+ **/
+static void cmm_unregister_sysfs(struct sys_device *sysdev)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cmm_attrs); i++)
+		sysdev_remove_file(sysdev, cmm_attrs[i]);
+	sysdev_unregister(sysdev);
+	sysdev_class_unregister(&cmm_sysdev_class);
+}
+
+/**
+ * cmm_init - Module initialization
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int cmm_init(void)
+{
+	int rc = -ENOMEM;
+
+	if (!firmware_has_feature(FW_FEATURE_CMO))
+		return -EOPNOTSUPP;
+
+	if ((rc = register_oom_notifier(&cmm_oom_nb)) < 0)
+		return rc;
+
+	if ((rc = cmm_sysfs_register(&cmm_sysdev)))
+		goto out_oom_notifier;
+
+	if (cmm_disabled)
+		return rc;
+
+	cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
+	if (IS_ERR(cmm_thread_ptr)) {
+		rc = PTR_ERR(cmm_thread_ptr);
+		goto out_unregister_sysfs;
+	}
+
+	return rc;
+
+out_unregister_sysfs:
+	cmm_unregister_sysfs(&cmm_sysdev);
+out_oom_notifier:
+	unregister_oom_notifier(&cmm_oom_nb);
+	return rc;
+}
+
+/**
+ * cmm_exit - Module exit
+ *
+ * Return value:
+ * 	nothing
+ **/
+static void cmm_exit(void)
+{
+	if (cmm_thread_ptr)
+		kthread_stop(cmm_thread_ptr);
+	unregister_oom_notifier(&cmm_oom_nb);
+	cmm_free_pages(loaned_pages);
+	cmm_unregister_sysfs(&cmm_sysdev);
+}
+
+/**
+ * cmm_set_disable - Disable/Enable CMM
+ *
+ * Return value:
+ * 	0 on success / other on failure
+ **/
+static int cmm_set_disable(const char *val, struct kernel_param *kp)
+{
+	int disable = simple_strtoul(val, NULL, 10);
+
+	if (disable != 0 && disable != 1)
+		return -EINVAL;
+
+	if (disable && !cmm_disabled) {
+		if (cmm_thread_ptr)
+			kthread_stop(cmm_thread_ptr);
+		cmm_thread_ptr = NULL;
+		cmm_free_pages(loaned_pages);
+	} else if (!disable && cmm_disabled) {
+		cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread");
+		if (IS_ERR(cmm_thread_ptr))
+			return PTR_ERR(cmm_thread_ptr);
+	}
+
+	cmm_disabled = disable;
+	return 0;
+}
+
+module_param_call(disable, cmm_set_disable, param_get_uint,
+		  &cmm_disabled, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(disable, "Disable CMM. Set to 1 to disable. "
+		 "[Default=" __stringify(CMM_DISABLE) "]");
+
+module_init(cmm_init);
+module_exit(cmm_exit);
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 6f544ba4b37f..54816d75b578 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -75,9 +75,9 @@
  */
 
 /* If a device driver keeps reading an MMIO register in an interrupt
- * handler after a slot isolation event has occurred, we assume it
- * is broken and panic.  This sets the threshold for how many read
- * attempts we allow before panicking.
+ * handler after a slot isolation event, it might be broken.
+ * This sets the threshold for how many read attempts we allow
+ * before printing an error message.
  */
 #define EEH_MAX_FAILS	2100000
 
@@ -470,6 +470,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	unsigned long flags;
 	struct pci_dn *pdn;
 	int rc = 0;
+	const char *location;
 
 	total_mmio_ffs++;
 
@@ -509,18 +510,15 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 	rc = 1;
 	if (pdn->eeh_mode & EEH_MODE_ISOLATED) {
 		pdn->eeh_check_count ++;
-		if (pdn->eeh_check_count >= EEH_MAX_FAILS) {
-			printk (KERN_ERR "EEH: Device driver ignored %d bad reads, panicing\n",
-			        pdn->eeh_check_count);
+		if (pdn->eeh_check_count % EEH_MAX_FAILS == 0) {
+			location = of_get_property(dn, "ibm,loc-code", NULL);
+			printk (KERN_ERR "EEH: %d reads ignored for recovering device at "
+				"location=%s driver=%s pci addr=%s\n",
+				pdn->eeh_check_count, location,
+				dev->driver->name, pci_name(dev));
+			printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n",
+				dev->driver->name);
 			dump_stack();
-			msleep(5000);
-			
-			/* re-read the slot reset state */
-			if (read_slot_reset_state(pdn, rets) != 0)
-				rets[0] = -1;	/* reset state unknown */
-
-			/* If we are here, then we hit an infinite loop. Stop. */
-			panic("EEH: MMIO halt (%d) on device:%s\n", rets[0], pci_name(dev));
 		}
 		goto dn_unlock;
 	}
@@ -812,6 +810,7 @@ int rtas_set_slot_reset(struct pci_dn *pdn)
 static inline void __restore_bars (struct pci_dn *pdn)
 {
 	int i;
+	u32 cmd;
 
 	if (NULL==pdn->phb) return;
 	for (i=4; i<10; i++) {
@@ -832,6 +831,19 @@ static inline void __restore_bars (struct pci_dn *pdn)
 
 	/* max latency, min grant, interrupt pin and line */
 	rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]);
+
+	/* Restore PERR & SERR bits, some devices require it,
+	   don't touch the other command bits */
+	rtas_read_config(pdn, PCI_COMMAND, 4, &cmd);
+	if (pdn->config_space[1] & PCI_COMMAND_PARITY)
+		cmd |= PCI_COMMAND_PARITY;
+	else
+		cmd &= ~PCI_COMMAND_PARITY;
+	if (pdn->config_space[1] & PCI_COMMAND_SERR)
+		cmd |= PCI_COMMAND_SERR;
+	else
+		cmd &= ~PCI_COMMAND_SERR;
+	rtas_write_config(pdn, PCI_COMMAND, 4, cmd);
 }
 
 /**
diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c
index 9d3a40f45974..5a707da3f5c2 100644
--- a/arch/powerpc/platforms/pseries/firmware.c
+++ b/arch/powerpc/platforms/pseries/firmware.c
@@ -26,6 +26,7 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 
+#include "pseries.h"
 
 typedef struct {
     unsigned long val;
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 3c5727dd5aa5..a1a368dd2d99 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -15,34 +15,13 @@
 #include <asm/machdep.h>
 #include <asm/pSeries_reconfig.h>
 
-static int pseries_remove_memory(struct device_node *np)
+static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size)
 {
-	const char *type;
-	const unsigned int *my_index;
-	const unsigned int *regs;
-	u64 start_pfn, start;
+	unsigned long start, start_pfn;
 	struct zone *zone;
-	int ret = -EINVAL;
-
-	/*
-	 * Check to see if we are actually removing memory
-	 */
-	type = of_get_property(np, "device_type", NULL);
-	if (type == NULL || strcmp(type, "memory") != 0)
-		return 0;
+	int ret;
 
-	/*
-	 * Find the memory index and size of the removing section
-	 */
-	my_index = of_get_property(np, "ibm,my-drc-index", NULL);
-	if (!my_index)
-		return ret;
-
-	regs = of_get_property(np, "reg", NULL);
-	if (!regs)
-		return ret;
-
-	start_pfn = section_nr_to_pfn(*my_index & 0xffff);
+	start_pfn = base >> PFN_SECTION_SHIFT;
 	zone = page_zone(pfn_to_page(start_pfn));
 
 	/*
@@ -54,56 +33,111 @@ static int pseries_remove_memory(struct device_node *np)
 	 * to sysfs "state" file and we can't remove sysfs entries
 	 * while writing to it. So we have to defer it to here.
 	 */
-	ret = __remove_pages(zone, start_pfn, regs[3] >> PAGE_SHIFT);
+	ret = __remove_pages(zone, start_pfn, lmb_size >> PAGE_SHIFT);
 	if (ret)
 		return ret;
 
 	/*
 	 * Update memory regions for memory remove
 	 */
-	lmb_remove(start_pfn << PAGE_SHIFT, regs[3]);
+	lmb_remove(base, lmb_size);
 
 	/*
 	 * Remove htab bolted mappings for this section of memory
 	 */
-	start = (unsigned long)__va(start_pfn << PAGE_SHIFT);
-	ret = remove_section_mapping(start, start + regs[3]);
+	start = (unsigned long)__va(base);
+	ret = remove_section_mapping(start, start + lmb_size);
 	return ret;
 }
 
-static int pseries_add_memory(struct device_node *np)
+static int pseries_remove_memory(struct device_node *np)
 {
 	const char *type;
-	const unsigned int *my_index;
 	const unsigned int *regs;
-	u64 start_pfn;
+	unsigned long base;
+	unsigned int lmb_size;
 	int ret = -EINVAL;
 
 	/*
-	 * Check to see if we are actually adding memory
+	 * Check to see if we are actually removing memory
 	 */
 	type = of_get_property(np, "device_type", NULL);
 	if (type == NULL || strcmp(type, "memory") != 0)
 		return 0;
 
 	/*
-	 * Find the memory index and size of the added section
+	 * Find the bae address and size of the lmb
 	 */
-	my_index = of_get_property(np, "ibm,my-drc-index", NULL);
-	if (!my_index)
+	regs = of_get_property(np, "reg", NULL);
+	if (!regs)
 		return ret;
 
+	base = *(unsigned long *)regs;
+	lmb_size = regs[3];
+
+	ret = pseries_remove_lmb(base, lmb_size);
+	return ret;
+}
+
+static int pseries_add_memory(struct device_node *np)
+{
+	const char *type;
+	const unsigned int *regs;
+	unsigned long base;
+	unsigned int lmb_size;
+	int ret = -EINVAL;
+
+	/*
+	 * Check to see if we are actually adding memory
+	 */
+	type = of_get_property(np, "device_type", NULL);
+	if (type == NULL || strcmp(type, "memory") != 0)
+		return 0;
+
+	/*
+	 * Find the base and size of the lmb
+	 */
 	regs = of_get_property(np, "reg", NULL);
 	if (!regs)
 		return ret;
 
-	start_pfn = section_nr_to_pfn(*my_index & 0xffff);
+	base = *(unsigned long *)regs;
+	lmb_size = regs[3];
 
 	/*
 	 * Update memory region to represent the memory add
 	 */
-	lmb_add(start_pfn << PAGE_SHIFT, regs[3]);
-	return 0;
+	ret = lmb_add(base, lmb_size);
+	return (ret < 0) ? -EINVAL : 0;
+}
+
+static int pseries_drconf_memory(unsigned long *base, unsigned int action)
+{
+	struct device_node *np;
+	const unsigned long *lmb_size;
+	int rc;
+
+	np = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
+	if (!np)
+		return -EINVAL;
+
+	lmb_size = of_get_property(np, "ibm,lmb-size", NULL);
+	if (!lmb_size) {
+		of_node_put(np);
+		return -EINVAL;
+	}
+
+	if (action == PSERIES_DRCONF_MEM_ADD) {
+		rc = lmb_add(*base, *lmb_size);
+		rc = (rc < 0) ? -EINVAL : 0;
+	} else if (action == PSERIES_DRCONF_MEM_REMOVE) {
+		rc = pseries_remove_lmb(*base, *lmb_size);
+	} else {
+		rc = -EINVAL;
+	}
+
+	of_node_put(np);
+	return rc;
 }
 
 static int pseries_memory_notifier(struct notifier_block *nb,
@@ -120,6 +154,11 @@ static int pseries_memory_notifier(struct notifier_block *nb,
 		if (pseries_remove_memory(node))
 			err = NOTIFY_BAD;
 		break;
+	case PSERIES_DRCONF_MEM_ADD:
+	case PSERIES_DRCONF_MEM_REMOVE:
+		if (pseries_drconf_memory(node, action))
+			err = NOTIFY_BAD;
+		break;
 	default:
 		err = NOTIFY_DONE;
 		break;
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 176f1f39d2d5..a8c446697f9e 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -48,9 +48,10 @@
 #include "plpar_wrappers.h"
 
 
-static void tce_build_pSeries(struct iommu_table *tbl, long index,
+static int tce_build_pSeries(struct iommu_table *tbl, long index,
 			      long npages, unsigned long uaddr,
-			      enum dma_data_direction direction)
+			      enum dma_data_direction direction,
+			      struct dma_attrs *attrs)
 {
 	u64 proto_tce;
 	u64 *tcep;
@@ -71,6 +72,7 @@ static void tce_build_pSeries(struct iommu_table *tbl, long index,
 		uaddr += TCE_PAGE_SIZE;
 		tcep++;
 	}
+	return 0;
 }
 
 
@@ -93,13 +95,19 @@ static unsigned long tce_get_pseries(struct iommu_table *tbl, long index)
 	return *tcep;
 }
 
-static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
+static void tce_free_pSeriesLP(struct iommu_table*, long, long);
+static void tce_freemulti_pSeriesLP(struct iommu_table*, long, long);
+
+static int tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 				long npages, unsigned long uaddr,
-				enum dma_data_direction direction)
+				enum dma_data_direction direction,
+				struct dma_attrs *attrs)
 {
-	u64 rc;
+	u64 rc = 0;
 	u64 proto_tce, tce;
 	u64 rpn;
+	int ret = 0;
+	long tcenum_start = tcenum, npages_start = npages;
 
 	rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT;
 	proto_tce = TCE_PCI_READ;
@@ -110,6 +118,13 @@ static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tce = proto_tce | (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT;
 		rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, tce);
 
+		if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
+			ret = (int)rc;
+			tce_free_pSeriesLP(tbl, tcenum_start,
+			                   (npages_start - (npages + 1)));
+			break;
+		}
+
 		if (rc && printk_ratelimit()) {
 			printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
 			printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
@@ -121,23 +136,28 @@ static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tcenum++;
 		rpn++;
 	}
+	return ret;
 }
 
 static DEFINE_PER_CPU(u64 *, tce_page) = NULL;
 
-static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
+static int tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 				     long npages, unsigned long uaddr,
-				     enum dma_data_direction direction)
+				     enum dma_data_direction direction,
+				     struct dma_attrs *attrs)
 {
-	u64 rc;
+	u64 rc = 0;
 	u64 proto_tce;
 	u64 *tcep;
 	u64 rpn;
 	long l, limit;
+	long tcenum_start = tcenum, npages_start = npages;
+	int ret = 0;
 
-	if (npages == 1)
+	if (npages == 1) {
 		return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
-					   direction);
+		                           direction, attrs);
+	}
 
 	tcep = __get_cpu_var(tce_page);
 
@@ -147,9 +167,10 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 	if (!tcep) {
 		tcep = (u64 *)__get_free_page(GFP_ATOMIC);
 		/* If allocation fails, fall back to the loop implementation */
-		if (!tcep)
-			return tce_build_pSeriesLP(tbl, tcenum, npages,
-						   uaddr, direction);
+		if (!tcep) {
+			return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr,
+					    direction, attrs);
+		}
 		__get_cpu_var(tce_page) = tcep;
 	}
 
@@ -180,6 +201,13 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		tcenum += limit;
 	} while (npages > 0 && !rc);
 
+	if (unlikely(rc == H_NOT_ENOUGH_RESOURCES)) {
+		ret = (int)rc;
+		tce_freemulti_pSeriesLP(tbl, tcenum_start,
+		                        (npages_start - (npages + limit)));
+		return ret;
+	}
+
 	if (rc && printk_ratelimit()) {
 		printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%ld\n", rc);
 		printk("\tindex   = 0x%lx\n", (u64)tbl->it_index);
@@ -187,6 +215,7 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum,
 		printk("\ttce[0] val = 0x%lx\n", tcep[0]);
 		show_stack(current, (unsigned long *)__get_SP());
 	}
+	return ret;
 }
 
 static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages)
diff --git a/arch/powerpc/platforms/pseries/kexec.c b/arch/powerpc/platforms/pseries/kexec.c
index e9dd5fe081c9..53cbd53d8740 100644
--- a/arch/powerpc/platforms/pseries/kexec.c
+++ b/arch/powerpc/platforms/pseries/kexec.c
@@ -70,4 +70,4 @@ static int __init pseries_kexec_setup(void)
 
 	return 0;
 }
-__initcall(pseries_kexec_setup);
+machine_device_initcall(pseries, pseries_kexec_setup);
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 2cbaedb17f3e..52a80e5840e8 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -52,7 +52,7 @@ EXPORT_SYMBOL(plpar_hcall_norets);
 extern void pSeries_find_serial_port(void);
 
 
-int vtermno;	/* virtual terminal# for udbg  */
+static int vtermno;	/* virtual terminal# for udbg  */
 
 #define __ALIGNED__ __attribute__((__aligned__(sizeof(long))))
 static void udbg_hvsi_putc(char c)
@@ -305,7 +305,7 @@ static long pSeries_lpar_hpte_insert(unsigned long hpte_group,
 	flags = 0;
 
 	/* Make pHyp happy */
-	if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE))
+	if ((rflags & _PAGE_NO_CACHE) & !(rflags & _PAGE_WRITETHRU))
 		hpte_r &= ~_PAGE_COHERENT;
 
 	lpar_rc = plpar_pte_enter(flags, hpte_group, hpte_v, hpte_r, &slot);
diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h
index d8680b589dc9..a437267c6bf8 100644
--- a/arch/powerpc/platforms/pseries/plpar_wrappers.h
+++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h
@@ -42,6 +42,16 @@ static inline long register_slb_shadow(unsigned long cpu, unsigned long vpa)
 	return vpa_call(0x3, cpu, vpa);
 }
 
+static inline long plpar_page_set_loaned(unsigned long vpa)
+{
+	return plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_LOANED, vpa, 0);
+}
+
+static inline long plpar_page_set_active(unsigned long vpa)
+{
+	return plpar_hcall_norets(H_PAGE_INIT, H_PAGE_SET_ACTIVE, vpa, 0);
+}
+
 extern void vpa_init(int cpu);
 
 static inline long plpar_pte_enter(unsigned long flags,
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index 2b548afd1003..d20b96e22c2e 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -55,7 +55,7 @@
 static unsigned char ras_log_buf[RTAS_ERROR_LOG_MAX];
 static DEFINE_SPINLOCK(ras_log_buf_lock);
 
-char mce_data_buf[RTAS_ERROR_LOG_MAX];
+static char mce_data_buf[RTAS_ERROR_LOG_MAX];
 
 static int ras_get_sensor_state_token;
 static int ras_check_exception_token;
diff --git a/arch/powerpc/platforms/pseries/reconfig.c b/arch/powerpc/platforms/pseries/reconfig.c
index 75769aae41d5..7637bd38c795 100644
--- a/arch/powerpc/platforms/pseries/reconfig.c
+++ b/arch/powerpc/platforms/pseries/reconfig.c
@@ -365,7 +365,7 @@ static char *parse_node(char *buf, size_t bufsize, struct device_node **npp)
 	*buf = '\0';
 	buf++;
 
-	handle = simple_strtoul(handle_str, NULL, 10);
+	handle = simple_strtoul(handle_str, NULL, 0);
 
 	*npp = of_find_node_by_phandle(handle);
 	return buf;
@@ -422,8 +422,8 @@ static int do_update_property(char *buf, size_t bufsize)
 {
 	struct device_node *np;
 	unsigned char *value;
-	char *name, *end;
-	int length;
+	char *name, *end, *next_prop;
+	int rc, length;
 	struct property *newprop, *oldprop;
 	buf = parse_node(buf, bufsize, &np);
 	end = buf + bufsize;
@@ -431,7 +431,8 @@ static int do_update_property(char *buf, size_t bufsize)
 	if (!np)
 		return -ENODEV;
 
-	if (parse_next_property(buf, end, &name, &length, &value) == NULL)
+	next_prop = parse_next_property(buf, end, &name, &length, &value);
+	if (!next_prop)
 		return -EINVAL;
 
 	newprop = new_property(name, length, value, NULL);
@@ -442,7 +443,34 @@ static int do_update_property(char *buf, size_t bufsize)
 	if (!oldprop)
 		return -ENODEV;
 
-	return prom_update_property(np, newprop, oldprop);
+	rc = prom_update_property(np, newprop, oldprop);
+	if (rc)
+		return rc;
+
+	/* For memory under the ibm,dynamic-reconfiguration-memory node
+	 * of the device tree, adding and removing memory is just an update
+	 * to the ibm,dynamic-memory property instead of adding/removing a
+	 * memory node in the device tree.  For these cases we still need to
+	 * involve the notifier chain.
+	 */
+	if (!strcmp(name, "ibm,dynamic-memory")) {
+		int action;
+
+		next_prop = parse_next_property(next_prop, end, &name,
+						&length, &value);
+		if (!next_prop)
+			return -EINVAL;
+
+		if (!strcmp(name, "add"))
+			action = PSERIES_DRCONF_MEM_ADD;
+		else
+			action = PSERIES_DRCONF_MEM_REMOVE;
+
+		blocking_notifier_call_chain(&pSeries_reconfig_chain,
+					     action, value);
+	}
+
+	return 0;
 }
 
 /**
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
index 7d3e2b0bd4d2..c9ffd8c225f1 100644
--- a/arch/powerpc/platforms/pseries/rtasd.c
+++ b/arch/powerpc/platforms/pseries/rtasd.c
@@ -32,7 +32,7 @@
 
 static DEFINE_SPINLOCK(rtasd_log_lock);
 
-DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait);
+static DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait);
 
 static char *rtas_log_buf;
 static unsigned long rtas_log_start;
@@ -329,7 +329,7 @@ static unsigned int rtas_log_poll(struct file *file, poll_table * wait)
 	return 0;
 }
 
-const struct file_operations proc_rtas_log_operations = {
+static const struct file_operations proc_rtas_log_operations = {
 	.read =		rtas_log_read,
 	.poll =		rtas_log_poll,
 	.open =		rtas_log_open,
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index f5d29f5b13c1..063a0d2fba30 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -109,7 +109,7 @@ static void __init fwnmi_init(void)
 		fwnmi_active = 1;
 }
 
-void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc)
+static void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned int cascade_irq = i8259_irq();
 	if (cascade_irq != NO_IRQ)
@@ -314,6 +314,76 @@ static int pseries_set_xdabr(unsigned long dabr)
 			H_DABRX_KERNEL | H_DABRX_USER);
 }
 
+#define CMO_CHARACTERISTICS_TOKEN 44
+#define CMO_MAXLENGTH 1026
+
+/**
+ * fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions,
+ * handle that here. (Stolen from parse_system_parameter_string)
+ */
+void pSeries_cmo_feature_init(void)
+{
+	char *ptr, *key, *value, *end;
+	int call_status;
+	int PrPSP = -1;
+	int SecPSP = -1;
+
+	pr_debug(" -> fw_cmo_feature_init()\n");
+	spin_lock(&rtas_data_buf_lock);
+	memset(rtas_data_buf, 0, RTAS_DATA_BUF_SIZE);
+	call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,
+				NULL,
+				CMO_CHARACTERISTICS_TOKEN,
+				__pa(rtas_data_buf),
+				RTAS_DATA_BUF_SIZE);
+
+	if (call_status != 0) {
+		spin_unlock(&rtas_data_buf_lock);
+		pr_debug("CMO not available\n");
+		pr_debug(" <- fw_cmo_feature_init()\n");
+		return;
+	}
+
+	end = rtas_data_buf + CMO_MAXLENGTH - 2;
+	ptr = rtas_data_buf + 2;	/* step over strlen value */
+	key = value = ptr;
+
+	while (*ptr && (ptr <= end)) {
+		/* Separate the key and value by replacing '=' with '\0' and
+		 * point the value at the string after the '='
+		 */
+		if (ptr[0] == '=') {
+			ptr[0] = '\0';
+			value = ptr + 1;
+		} else if (ptr[0] == '\0' || ptr[0] == ',') {
+			/* Terminate the string containing the key/value pair */
+			ptr[0] = '\0';
+
+			if (key == value) {
+				pr_debug("Malformed key/value pair\n");
+				/* Never found a '=', end processing */
+				break;
+			}
+
+			if (0 == strcmp(key, "PrPSP"))
+				PrPSP = simple_strtol(value, NULL, 10);
+			else if (0 == strcmp(key, "SecPSP"))
+				SecPSP = simple_strtol(value, NULL, 10);
+			value = key = ptr + 1;
+		}
+		ptr++;
+	}
+
+	if (PrPSP != -1 || SecPSP != -1) {
+		pr_info("CMO enabled\n");
+		pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", PrPSP, SecPSP);
+		powerpc_firmware_features |= FW_FEATURE_CMO;
+	} else
+		pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", PrPSP, SecPSP);
+	spin_unlock(&rtas_data_buf_lock);
+	pr_debug(" <- fw_cmo_feature_init()\n");
+}
+
 /*
  * Early initialization.  Relocation is on but do not reference unbolted pages
  */
@@ -329,6 +399,7 @@ static void __init pSeries_init_early(void)
 	else if (firmware_has_feature(FW_FEATURE_XDABR))
 		ppc_md.set_dabr = pseries_set_xdabr;
 
+	pSeries_cmo_feature_init();
 	iommu_init_early_pSeries();
 
 	pr_debug(" <- pSeries_init_early()\n");
@@ -482,7 +553,7 @@ static int pSeries_pci_probe_mode(struct pci_bus *bus)
  * possible with power button press. If ibm,power-off-ups token is used
  * it will allow auto poweron after power is restored.
  */
-void pSeries_power_off(void)
+static void pSeries_power_off(void)
 {
 	int rc;
 	int rtas_poweroff_ups_token = rtas_token("ibm,power-off-ups");
diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c
index ebebc28fe895..0fc830f576f5 100644
--- a/arch/powerpc/platforms/pseries/xics.c
+++ b/arch/powerpc/platforms/pseries/xics.c
@@ -383,13 +383,11 @@ static irqreturn_t xics_ipi_dispatch(int cpu)
 			mb();
 			smp_message_recv(PPC_MSG_RESCHEDULE);
 		}
-#if 0
-		if (test_and_clear_bit(PPC_MSG_MIGRATE_TASK,
+		if (test_and_clear_bit(PPC_MSG_CALL_FUNC_SINGLE,
 				       &xics_ipi_message[cpu].value)) {
 			mb();
-			smp_message_recv(PPC_MSG_MIGRATE_TASK);
+			smp_message_recv(PPC_MSG_CALL_FUNC_SINGLE);
 		}
-#endif
 #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC)
 		if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK,
 				       &xics_ipi_message[cpu].value)) {
diff --git a/arch/powerpc/sysdev/6xx-suspend.S b/arch/powerpc/sysdev/6xx-suspend.S
new file mode 100644
index 000000000000..21cda085d926
--- /dev/null
+++ b/arch/powerpc/sysdev/6xx-suspend.S
@@ -0,0 +1,52 @@
+/*
+ * Enter and leave sleep state on chips with 6xx-style HID0
+ * power management bits, which don't leave sleep state via reset.
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2006-2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
+#include <asm/thread_info.h>
+#include <asm/asm-offsets.h>
+
+_GLOBAL(mpc6xx_enter_standby)
+	mflr	r4
+
+	mfspr	r5, SPRN_HID0
+	rlwinm	r5, r5, 0, ~(HID0_DOZE | HID0_NAP)
+	oris	r5, r5, HID0_SLEEP@h
+	mtspr	SPRN_HID0, r5
+	isync
+
+	lis	r5, ret_from_standby@h
+	ori	r5, r5, ret_from_standby@l
+	mtlr	r5
+
+	rlwinm	r5, r1, 0, 0, 31-THREAD_SHIFT
+	lwz	r6, TI_LOCAL_FLAGS(r5)
+	ori	r6, r6, _TLF_SLEEPING
+	stw	r6, TI_LOCAL_FLAGS(r5)
+
+	mfmsr	r5
+	ori	r5, r5, MSR_EE
+	oris	r5, r5, MSR_POW@h
+	sync
+	mtmsr	r5
+	isync
+
+1:	b	1b
+
+ret_from_standby:
+	mfspr	r5, SPRN_HID0
+	rlwinm	r5, r5, 0, ~HID0_SLEEP
+	mtspr	SPRN_HID0, r5
+
+	mtlr	r4
+	blr
diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
index 6d386d0071a0..a90054b56d5c 100644
--- a/arch/powerpc/sysdev/Makefile
+++ b/arch/powerpc/sysdev/Makefile
@@ -4,6 +4,7 @@ endif
 
 mpic-msi-obj-$(CONFIG_PCI_MSI)	+= mpic_msi.o mpic_u3msi.o mpic_pasemi_msi.o
 obj-$(CONFIG_MPIC)		+= mpic.o $(mpic-msi-obj-y)
+fsl-msi-obj-$(CONFIG_PCI_MSI)	+= fsl_msi.o
 
 obj-$(CONFIG_PPC_MPC106)	+= grackle.o
 obj-$(CONFIG_PPC_DCR_NATIVE)	+= dcr-low.o
@@ -11,8 +12,9 @@ obj-$(CONFIG_PPC_PMI)		+= pmi.o
 obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o
-obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o
+obj-$(CONFIG_FSL_PCI)		+= fsl_pci.o $(fsl-msi-obj-y)
 obj-$(CONFIG_FSL_LBC)		+= fsl_lbc.o
+obj-$(CONFIG_FSL_GTM)		+= fsl_gtm.o
 obj-$(CONFIG_RAPIDIO)		+= fsl_rio.o
 obj-$(CONFIG_TSI108_BRIDGE)	+= tsi108_pci.o tsi108_dev.o
 obj-$(CONFIG_QUICC_ENGINE)	+= qe_lib/
@@ -23,7 +25,6 @@ obj-$(CONFIG_MV64X60)		+= $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \
 obj-$(CONFIG_RTC_DRV_CMOS)	+= rtc_cmos_setup.o
 obj-$(CONFIG_AXON_RAM)		+= axonram.o
 
-ifeq ($(CONFIG_PPC_MERGE),y)
 obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
 obj-$(CONFIG_PPC_I8259)		+= i8259.o
 obj-$(CONFIG_IPIC)		+= ipic.o
@@ -34,13 +35,17 @@ obj-$(CONFIG_OF_RTC)		+= of_rtc.o
 ifeq ($(CONFIG_PCI),y)
 obj-$(CONFIG_4xx)		+= ppc4xx_pci.o
 endif
-endif
 
 # Temporary hack until we have migrated to asm-powerpc
 ifeq ($(ARCH),powerpc)
 obj-$(CONFIG_CPM)		+= cpm_common.o
 obj-$(CONFIG_CPM2)		+= cpm2.o cpm2_pic.o
+obj-$(CONFIG_QUICC_ENGINE)	+= cpm_common.o
 obj-$(CONFIG_PPC_DCR)		+= dcr.o
 obj-$(CONFIG_8xx)		+= mpc8xx_pic.o cpm1.o
 obj-$(CONFIG_UCODE_PATCH)	+= micropatch.o
 endif
+
+ifeq ($(CONFIG_SUSPEND),y)
+obj-$(CONFIG_6xx)		+= 6xx-suspend.o
+endif
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 7f59188cd9a1..9e105cbc5e5f 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -57,6 +57,8 @@
 #define AXON_RAM_SECTOR_SIZE		1 << AXON_RAM_SECTOR_SHIFT
 #define AXON_RAM_IRQ_FLAGS		IRQF_SHARED | IRQF_TRIGGER_RISING
 
+static int azfs_major, azfs_minor;
+
 struct axon_ram_bank {
 	struct of_device	*device;
 	struct gendisk		*disk;
@@ -148,7 +150,10 @@ axon_ram_direct_access(struct block_device *device, sector_t sector,
 	struct axon_ram_bank *bank = device->bd_disk->private_data;
 	loff_t offset;
 
-	offset = sector << AXON_RAM_SECTOR_SHIFT;
+	offset = sector;
+	if (device->bd_part != NULL)
+		offset += device->bd_part->start_sect;
+	offset <<= AXON_RAM_SECTOR_SHIFT;
 	if (offset >= bank->size) {
 		dev_err(&bank->device->dev, "Access outside of address space\n");
 		return -ERANGE;
@@ -227,19 +232,14 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
 		goto failed;
 	}
 
-	bank->disk->first_minor = 0;
+	bank->disk->major = azfs_major;
+	bank->disk->first_minor = azfs_minor;
 	bank->disk->fops = &axon_ram_devops;
 	bank->disk->private_data = bank;
 	bank->disk->driverfs_dev = &device->dev;
 
 	sprintf(bank->disk->disk_name, "%s%d",
 			AXON_RAM_DEVICE_NAME, axon_ram_bank_id);
-	bank->disk->major = register_blkdev(0, bank->disk->disk_name);
-	if (bank->disk->major < 0) {
-		dev_err(&device->dev, "Cannot register block device\n");
-		rc = -EFAULT;
-		goto failed;
-	}
 
 	bank->disk->queue = blk_alloc_queue(GFP_KERNEL);
 	if (bank->disk->queue == NULL) {
@@ -276,6 +276,8 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
 		goto failed;
 	}
 
+	azfs_minor += bank->disk->minors;
+
 	return 0;
 
 failed:
@@ -310,7 +312,6 @@ axon_ram_remove(struct of_device *device)
 
 	device_remove_file(&device->dev, &dev_attr_ecc);
 	free_irq(bank->irq_id, device);
-	unregister_blkdev(bank->disk->major, bank->disk->disk_name);
 	del_gendisk(bank->disk);
 	iounmap((void __iomem *) bank->io_addr);
 	kfree(bank);
@@ -341,6 +342,14 @@ static struct of_platform_driver axon_ram_driver = {
 static int __init
 axon_ram_init(void)
 {
+	azfs_major = register_blkdev(azfs_major, AXON_RAM_DEVICE_NAME);
+	if (azfs_major < 0) {
+		printk(KERN_ERR "%s cannot become block device major number\n",
+				AXON_RAM_MODULE_NAME);
+		return -EFAULT;
+	}
+	azfs_minor = 0;
+
 	return of_register_platform_driver(&axon_ram_driver);
 }
 
@@ -351,6 +360,7 @@ static void __exit
 axon_ram_exit(void)
 {
 	of_unregister_platform_driver(&axon_ram_driver);
+	unregister_blkdev(azfs_major, AXON_RAM_DEVICE_NAME);
 }
 
 module_init(axon_ram_init);
diff --git a/arch/powerpc/sysdev/bestcomm/bestcomm.c b/arch/powerpc/sysdev/bestcomm/bestcomm.c
index 64ec7d629363..446c9ea85b30 100644
--- a/arch/powerpc/sysdev/bestcomm/bestcomm.c
+++ b/arch/powerpc/sysdev/bestcomm/bestcomm.c
@@ -443,7 +443,7 @@ mpc52xx_bcom_probe(struct of_device *op, const struct of_device_id *match)
 
 	/* Done ! */
 	printk(KERN_INFO "DMA: MPC52xx BestComm engine @%08lx ok !\n",
-		bcom_eng->regs_base);
+		(long)bcom_eng->regs_base);
 
 	return 0;
 
diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.c b/arch/powerpc/sysdev/bestcomm/gen_bd.c
index 8d33eafbb3f4..a3a134c35b0a 100644
--- a/arch/powerpc/sysdev/bestcomm/gen_bd.c
+++ b/arch/powerpc/sysdev/bestcomm/gen_bd.c
@@ -20,6 +20,7 @@
 #include <asm/io.h>
 
 #include <asm/mpc52xx.h>
+#include <asm/mpc52xx_psc.h>
 
 #include "bestcomm.h"
 #include "bestcomm_priv.h"
@@ -253,6 +254,100 @@ bcom_gen_bd_tx_release(struct bcom_task *tsk)
 }
 EXPORT_SYMBOL_GPL(bcom_gen_bd_tx_release);
 
+/* ---------------------------------------------------------------------
+ * PSC support code
+ */
+
+/**
+ * bcom_psc_parameters - Bestcomm initialization value table for PSC devices
+ *
+ * This structure is only used internally.  It is a lookup table for PSC
+ * specific parameters to bestcomm tasks.
+ */
+static struct bcom_psc_params {
+	int rx_initiator;
+	int rx_ipr;
+	int tx_initiator;
+	int tx_ipr;
+} bcom_psc_params[] = {
+	[0] = {
+		.rx_initiator = BCOM_INITIATOR_PSC1_RX,
+		.rx_ipr = BCOM_IPR_PSC1_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC1_TX,
+		.tx_ipr = BCOM_IPR_PSC1_TX,
+	},
+	[1] = {
+		.rx_initiator = BCOM_INITIATOR_PSC2_RX,
+		.rx_ipr = BCOM_IPR_PSC2_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC2_TX,
+		.tx_ipr = BCOM_IPR_PSC2_TX,
+	},
+	[2] = {
+		.rx_initiator = BCOM_INITIATOR_PSC3_RX,
+		.rx_ipr = BCOM_IPR_PSC3_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC3_TX,
+		.tx_ipr = BCOM_IPR_PSC3_TX,
+	},
+	[3] = {
+		.rx_initiator = BCOM_INITIATOR_PSC4_RX,
+		.rx_ipr = BCOM_IPR_PSC4_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC4_TX,
+		.tx_ipr = BCOM_IPR_PSC4_TX,
+	},
+	[4] = {
+		.rx_initiator = BCOM_INITIATOR_PSC5_RX,
+		.rx_ipr = BCOM_IPR_PSC5_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC5_TX,
+		.tx_ipr = BCOM_IPR_PSC5_TX,
+	},
+	[5] = {
+		.rx_initiator = BCOM_INITIATOR_PSC6_RX,
+		.rx_ipr = BCOM_IPR_PSC6_RX,
+		.tx_initiator = BCOM_INITIATOR_PSC6_TX,
+		.tx_ipr = BCOM_IPR_PSC6_TX,
+	},
+};
+
+/**
+ * bcom_psc_gen_bd_rx_init - Allocate a receive bcom_task for a PSC port
+ * @psc_num:	Number of the PSC to allocate a task for
+ * @queue_len:	number of buffer descriptors to allocate for the task
+ * @fifo:	physical address of FIFO register
+ * @maxbufsize:	Maximum receive data size in bytes.
+ *
+ * Allocate a bestcomm task structure for receiving data from a PSC.
+ */
+struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len,
+					   phys_addr_t fifo, int maxbufsize)
+{
+	if (psc_num >= MPC52xx_PSC_MAXNUM)
+		return NULL;
+
+	return bcom_gen_bd_rx_init(queue_len, fifo,
+				   bcom_psc_params[psc_num].rx_initiator,
+				   bcom_psc_params[psc_num].rx_ipr,
+				   maxbufsize);
+}
+EXPORT_SYMBOL_GPL(bcom_psc_gen_bd_rx_init);
+
+/**
+ * bcom_psc_gen_bd_tx_init - Allocate a transmit bcom_task for a PSC port
+ * @psc_num:	Number of the PSC to allocate a task for
+ * @queue_len:	number of buffer descriptors to allocate for the task
+ * @fifo:	physical address of FIFO register
+ *
+ * Allocate a bestcomm task structure for transmitting data to a PSC.
+ */
+struct bcom_task *
+bcom_psc_gen_bd_tx_init(unsigned psc_num, int queue_len, phys_addr_t fifo)
+{
+	struct psc;
+	return bcom_gen_bd_tx_init(queue_len, fifo,
+				   bcom_psc_params[psc_num].tx_initiator,
+				   bcom_psc_params[psc_num].tx_ipr);
+}
+EXPORT_SYMBOL_GPL(bcom_psc_gen_bd_tx_init);
+
 
 MODULE_DESCRIPTION("BestComm General Buffer Descriptor tasks driver");
 MODULE_AUTHOR("Jeff Gibbons <jeff.gibbons@appspec.com>");
diff --git a/arch/powerpc/sysdev/bestcomm/gen_bd.h b/arch/powerpc/sysdev/bestcomm/gen_bd.h
index 5b6fa803c6aa..de47260e69da 100644
--- a/arch/powerpc/sysdev/bestcomm/gen_bd.h
+++ b/arch/powerpc/sysdev/bestcomm/gen_bd.h
@@ -44,5 +44,10 @@ extern void
 bcom_gen_bd_tx_release(struct bcom_task *tsk);
 
 
+/* PSC support utility wrappers */
+struct bcom_task * bcom_psc_gen_bd_rx_init(unsigned psc_num, int queue_len,
+					   phys_addr_t fifo, int maxbufsize);
+struct bcom_task * bcom_psc_gen_bd_tx_init(unsigned psc_num, int queue_len,
+					   phys_addr_t fifo);
 #endif  /* __BESTCOMM_GEN_BD_H__ */
 
diff --git a/arch/powerpc/sysdev/bestcomm/sram.c b/arch/powerpc/sysdev/bestcomm/sram.c
index 99784383a843..5d74ef7a651f 100644
--- a/arch/powerpc/sysdev/bestcomm/sram.c
+++ b/arch/powerpc/sysdev/bestcomm/sram.c
@@ -86,7 +86,7 @@ int bcom_sram_init(struct device_node *sram_node, char *owner)
 	if (!bcom_sram->base_virt) {
 		printk(KERN_ERR "%s: bcom_sram_init: "
 			"Map error SRAM zone 0x%08lx (0x%0x)!\n",
-			owner, bcom_sram->base_phys, bcom_sram->size );
+			owner, (long)bcom_sram->base_phys, bcom_sram->size );
 		rv = -ENOMEM;
 		goto error_release;
 	}
diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c
index 58292a086c16..4a04823e8423 100644
--- a/arch/powerpc/sysdev/cpm1.c
+++ b/arch/powerpc/sysdev/cpm1.c
@@ -30,6 +30,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/module.h>
+#include <linux/spinlock.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
 #include <asm/8xx_immap.h>
@@ -42,6 +43,10 @@
 
 #include <asm/fs_pd.h>
 
+#ifdef CONFIG_8xx_GPIO
+#include <linux/of_gpio.h>
+#endif
+
 #define CPM_MAP_SIZE    (0x4000)
 
 cpm8xx_t __iomem *cpmp;  /* Pointer to comm processor space */
@@ -159,7 +164,7 @@ unsigned int cpm_pic_init(void)
 
 	out_be32(&cpic_reg->cpic_cimr, 0);
 
-	cpm_pic_host = irq_alloc_host(of_node_get(np), IRQ_HOST_MAP_LINEAR,
+	cpm_pic_host = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR,
 				      64, &cpm_pic_host_ops, 64);
 	if (cpm_pic_host == NULL) {
 		printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
@@ -290,20 +295,24 @@ struct cpm_ioport16 {
 	__be16 res[3];
 };
 
-struct cpm_ioport32 {
-	__be32 dir, par, sor;
+struct cpm_ioport32b {
+	__be32 dir, par, odr, dat;
+};
+
+struct cpm_ioport32e {
+	__be32 dir, par, sor, odr, dat;
 };
 
 static void cpm1_set_pin32(int port, int pin, int flags)
 {
-	struct cpm_ioport32 __iomem *iop;
+	struct cpm_ioport32e __iomem *iop;
 	pin = 1 << (31 - pin);
 
 	if (port == CPM_PORTB)
-		iop = (struct cpm_ioport32 __iomem *)
+		iop = (struct cpm_ioport32e __iomem *)
 		      &mpc8xx_immr->im_cpm.cp_pbdir;
 	else
-		iop = (struct cpm_ioport32 __iomem *)
+		iop = (struct cpm_ioport32e __iomem *)
 		      &mpc8xx_immr->im_cpm.cp_pedir;
 
 	if (flags & CPM_PIN_OUTPUT)
@@ -498,3 +507,251 @@ int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
 
 	return 0;
 }
+
+/*
+ * GPIO LIB API implementation
+ */
+#ifdef CONFIG_8xx_GPIO
+
+struct cpm1_gpio16_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u16 cpdata;
+};
+
+static inline struct cpm1_gpio16_chip *
+to_cpm1_gpio16_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc);
+}
+
+static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+
+	cpm1_gc->cpdata = in_be16(&iop->dat);
+}
+
+static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	u16 pin_mask;
+
+	pin_mask = 1 << (15 - gpio);
+
+	return !!(in_be16(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio16_chip *cpm1_gc = to_cpm1_gpio16_chip(mm_gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u16 pin_mask = 1 << (15 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	if (value)
+		cpm1_gc->cpdata |= pin_mask;
+	else
+		cpm1_gc->cpdata &= ~pin_mask;
+
+	out_be16(&iop->dat, cpm1_gc->cpdata);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	u16 pin_mask;
+
+	pin_mask = 1 << (15 - gpio);
+
+	setbits16(&iop->dir, pin_mask);
+
+	cpm1_gpio16_set(gc, gpio, val);
+
+	return 0;
+}
+
+static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	u16 pin_mask;
+
+	pin_mask = 1 << (15 - gpio);
+
+	clrbits16(&iop->dir, pin_mask);
+
+	return 0;
+}
+
+int cpm1_gpiochip_add16(struct device_node *np)
+{
+	struct cpm1_gpio16_chip *cpm1_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct of_gpio_chip *of_gc;
+	struct gpio_chip *gc;
+
+	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+	if (!cpm1_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm1_gc->lock);
+
+	mm_gc = &cpm1_gc->mm_gc;
+	of_gc = &mm_gc->of_gc;
+	gc = &of_gc->gc;
+
+	mm_gc->save_regs = cpm1_gpio16_save_regs;
+	of_gc->gpio_cells = 2;
+	gc->ngpio = 16;
+	gc->direction_input = cpm1_gpio16_dir_in;
+	gc->direction_output = cpm1_gpio16_dir_out;
+	gc->get = cpm1_gpio16_get;
+	gc->set = cpm1_gpio16_set;
+
+	return of_mm_gpiochip_add(np, mm_gc);
+}
+
+struct cpm1_gpio32_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u32 cpdata;
+};
+
+static inline struct cpm1_gpio32_chip *
+to_cpm1_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc);
+}
+
+static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+
+	cpm1_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio32_chip *cpm1_gc = to_cpm1_gpio32_chip(mm_gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	if (value)
+		cpm1_gc->cpdata |= pin_mask;
+	else
+		cpm1_gc->cpdata &= ~pin_mask;
+
+	out_be32(&iop->dat, cpm1_gc->cpdata);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	setbits32(&iop->dir, pin_mask);
+
+	cpm1_gpio32_set(gc, gpio, val);
+
+	return 0;
+}
+
+static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	clrbits32(&iop->dir, pin_mask);
+
+	return 0;
+}
+
+int cpm1_gpiochip_add32(struct device_node *np)
+{
+	struct cpm1_gpio32_chip *cpm1_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct of_gpio_chip *of_gc;
+	struct gpio_chip *gc;
+
+	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+	if (!cpm1_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm1_gc->lock);
+
+	mm_gc = &cpm1_gc->mm_gc;
+	of_gc = &mm_gc->of_gc;
+	gc = &of_gc->gc;
+
+	mm_gc->save_regs = cpm1_gpio32_save_regs;
+	of_gc->gpio_cells = 2;
+	gc->ngpio = 32;
+	gc->direction_input = cpm1_gpio32_dir_in;
+	gc->direction_output = cpm1_gpio32_dir_out;
+	gc->get = cpm1_gpio32_get;
+	gc->set = cpm1_gpio32_set;
+
+	return of_mm_gpiochip_add(np, mm_gc);
+}
+
+static int cpm_init_par_io(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-a")
+		cpm1_gpiochip_add16(np);
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-b")
+		cpm1_gpiochip_add32(np);
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-c")
+		cpm1_gpiochip_add16(np);
+
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-d")
+		cpm1_gpiochip_add16(np);
+
+	/* Port E uses CPM2 layout */
+	for_each_compatible_node(np, NULL, "fsl,cpm1-pario-bank-e")
+		cpm2_gpiochip_add32(np);
+	return 0;
+}
+arch_initcall(cpm_init_par_io);
+
+#endif /* CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c
index 5a6c5dfc53ef..f1c3395633b9 100644
--- a/arch/powerpc/sysdev/cpm2.c
+++ b/arch/powerpc/sysdev/cpm2.c
@@ -115,16 +115,10 @@ EXPORT_SYMBOL(cpm_command);
  * Baud rate clocks are zero-based in the driver code (as that maps
  * to port numbers).  Documentation uses 1-based numbering.
  */
-#define BRG_INT_CLK	(get_brgfreq())
-#define BRG_UART_CLK	(BRG_INT_CLK/16)
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-cpm_setbrg(uint brg, uint rate)
+void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src)
 {
 	u32 __iomem *bp;
+	u32 val;
 
 	/* This is good enough to get SMCs running.....
 	*/
@@ -135,34 +129,14 @@ cpm_setbrg(uint brg, uint rate)
 		brg -= 4;
 	}
 	bp += brg;
-	out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
-
-	cpm2_unmap(bp);
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-cpm2_fastbrg(uint brg, uint rate, int div16)
-{
-	u32 __iomem *bp;
-	u32 val;
-
-	if (brg < 4) {
-		bp = cpm2_map_size(im_brgc1, 16);
-	} else {
-		bp = cpm2_map_size(im_brgc5, 16);
-		brg -= 4;
-	}
-	bp += brg;
-	val = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
+	val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src;
 	if (div16)
 		val |= CPM_BRG_DIV16;
 
 	out_be32(bp, val);
 	cpm2_unmap(bp);
 }
+EXPORT_SYMBOL(__cpm2_setbrg);
 
 int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode)
 {
@@ -377,3 +351,14 @@ void cpm2_set_pin(int port, int pin, int flags)
 	else
 		clrbits32(&iop[port].odr, pin);
 }
+
+static int cpm_init_par_io(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,cpm2-pario-bank")
+		cpm2_gpiochip_add32(np);
+	return 0;
+}
+arch_initcall(cpm_init_par_io);
+
diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c
index 5fe65b2f8f3a..b16ca3ed65d2 100644
--- a/arch/powerpc/sysdev/cpm2_pic.c
+++ b/arch/powerpc/sysdev/cpm2_pic.c
@@ -266,7 +266,7 @@ void cpm2_pic_init(struct device_node *node)
 	out_be32(&cpm2_intctl->ic_scprrl, 0x05309770);
 
 	/* create a legacy host */
-	cpm2_pic_host = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR,
+	cpm2_pic_host = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				       64, &cpm2_pic_host_ops, 64);
 	if (cpm2_pic_host == NULL) {
 		printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index cb7df2dce44f..53da8a079f96 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -19,6 +19,8 @@
 
 #include <linux/init.h>
 #include <linux/of_device.h>
+#include <linux/spinlock.h>
+#include <linux/of.h>
 
 #include <asm/udbg.h>
 #include <asm/io.h>
@@ -28,6 +30,10 @@
 
 #include <mm/mmu_decl.h>
 
+#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
+#include <linux/of_gpio.h>
+#endif
+
 #ifdef CONFIG_PPC_EARLY_DEBUG_CPM
 static u32 __iomem *cpm_udbg_txdesc =
 	(u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR;
@@ -37,7 +43,7 @@ static void udbg_putc_cpm(char c)
 	u8 __iomem *txbuf = (u8 __iomem __force *)in_be32(&cpm_udbg_txdesc[1]);
 
 	if (c == '\n')
-		udbg_putc('\r');
+		udbg_putc_cpm('\r');
 
 	while (in_be32(&cpm_udbg_txdesc[0]) & 0x80000000)
 		;
@@ -53,7 +59,6 @@ void __init udbg_init_cpm(void)
 		setbat(1, 0xf0000000, 0xf0000000, 1024*1024, _PAGE_IO);
 #endif
 		udbg_putc = udbg_putc_cpm;
-		udbg_putc('X');
 	}
 }
 #endif
@@ -85,9 +90,13 @@ int __init cpm_muram_init(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,cpm-muram-data");
 	if (!np) {
-		printk(KERN_ERR "Cannot find CPM muram data node");
-		ret = -ENODEV;
-		goto out;
+		/* try legacy bindings */
+		np = of_find_node_by_name(NULL, "data-only");
+		if (!np) {
+			printk(KERN_ERR "Cannot find CPM muram data node");
+			ret = -ENODEV;
+			goto out;
+		}
 	}
 
 	muram_pbase = of_translate_address(np, zero);
@@ -189,6 +198,12 @@ void __iomem *cpm_muram_addr(unsigned long offset)
 }
 EXPORT_SYMBOL(cpm_muram_addr);
 
+unsigned long cpm_muram_offset(void __iomem *addr)
+{
+	return addr - (void __iomem *)muram_vbase;
+}
+EXPORT_SYMBOL(cpm_muram_offset);
+
 /**
  * cpm_muram_dma - turn a muram virtual address into a DMA address
  * @offset: virtual address from cpm_muram_addr() to convert
@@ -198,3 +213,120 @@ dma_addr_t cpm_muram_dma(void __iomem *addr)
 	return muram_pbase + ((u8 __iomem *)addr - muram_vbase);
 }
 EXPORT_SYMBOL(cpm_muram_dma);
+
+#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
+
+struct cpm2_ioports {
+	u32 dir, par, sor, odr, dat;
+	u32 res[3];
+};
+
+struct cpm2_gpio32_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u32 cpdata;
+};
+
+static inline struct cpm2_gpio32_chip *
+to_cpm2_gpio32_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct cpm2_gpio32_chip, mm_gc);
+}
+
+static void cpm2_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+
+	cpm2_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_gpio32_chip *cpm2_gc = to_cpm2_gpio32_chip(mm_gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm2_gc->lock, flags);
+
+	if (value)
+		cpm2_gc->cpdata |= pin_mask;
+	else
+		cpm2_gc->cpdata &= ~pin_mask;
+
+	out_be32(&iop->dat, cpm2_gc->cpdata);
+
+	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
+}
+
+static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	setbits32(&iop->dir, pin_mask);
+
+	cpm2_gpio32_set(gc, gpio, val);
+
+	return 0;
+}
+
+static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	clrbits32(&iop->dir, pin_mask);
+
+	return 0;
+}
+
+int cpm2_gpiochip_add32(struct device_node *np)
+{
+	struct cpm2_gpio32_chip *cpm2_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct of_gpio_chip *of_gc;
+	struct gpio_chip *gc;
+
+	cpm2_gc = kzalloc(sizeof(*cpm2_gc), GFP_KERNEL);
+	if (!cpm2_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm2_gc->lock);
+
+	mm_gc = &cpm2_gc->mm_gc;
+	of_gc = &mm_gc->of_gc;
+	gc = &of_gc->gc;
+
+	mm_gc->save_regs = cpm2_gpio32_save_regs;
+	of_gc->gpio_cells = 2;
+	gc->ngpio = 32;
+	gc->direction_input = cpm2_gpio32_dir_in;
+	gc->direction_output = cpm2_gpio32_dir_out;
+	gc->get = cpm2_gpio32_get;
+	gc->set = cpm2_gpio32_set;
+
+	return of_mm_gpiochip_add(np, mm_gc);
+}
+#endif /* CONFIG_CPM2 || CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 005c2ecf976f..89639ecbf381 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -147,9 +147,10 @@ static void dart_flush(struct iommu_table *tbl)
 	}
 }
 
-static void dart_build(struct iommu_table *tbl, long index,
+static int dart_build(struct iommu_table *tbl, long index,
 		       long npages, unsigned long uaddr,
-		       enum dma_data_direction direction)
+		       enum dma_data_direction direction,
+		       struct dma_attrs *attrs)
 {
 	unsigned int *dp;
 	unsigned int rpn;
@@ -183,6 +184,7 @@ static void dart_build(struct iommu_table *tbl, long index,
 	} else {
 		dart_dirty = 1;
 	}
+	return 0;
 }
 
 
diff --git a/arch/powerpc/sysdev/dcr.c b/arch/powerpc/sysdev/dcr.c
index 437e48d3ae33..a8ba9983dd5a 100644
--- a/arch/powerpc/sysdev/dcr.c
+++ b/arch/powerpc/sysdev/dcr.c
@@ -23,6 +23,107 @@
 #include <asm/prom.h>
 #include <asm/dcr.h>
 
+#ifdef CONFIG_PPC_DCR_MMIO
+static struct device_node *find_dcr_parent(struct device_node *node)
+{
+	struct device_node *par, *tmp;
+	const u32 *p;
+
+	for (par = of_node_get(node); par;) {
+		if (of_get_property(par, "dcr-controller", NULL))
+			break;
+		p = of_get_property(par, "dcr-parent", NULL);
+		tmp = par;
+		if (p == NULL)
+			par = of_get_parent(par);
+		else
+			par = of_find_node_by_phandle(*p);
+		of_node_put(tmp);
+	}
+	return par;
+}
+#endif
+
+#if defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO)
+
+bool dcr_map_ok_generic(dcr_host_t host)
+{
+	if (host.type == DCR_HOST_NATIVE)
+		return dcr_map_ok_native(host.host.native);
+	else if (host.type == DCR_HOST_MMIO)
+		return dcr_map_ok_mmio(host.host.mmio);
+	else
+		return 0;
+}
+EXPORT_SYMBOL_GPL(dcr_map_ok_generic);
+
+dcr_host_t dcr_map_generic(struct device_node *dev,
+			   unsigned int dcr_n,
+			   unsigned int dcr_c)
+{
+	dcr_host_t host;
+	struct device_node *dp;
+	const char *prop;
+
+	host.type = DCR_HOST_INVALID;
+
+	dp = find_dcr_parent(dev);
+	if (dp == NULL)
+		return host;
+
+	prop = of_get_property(dp, "dcr-access-method", NULL);
+
+	pr_debug("dcr_map_generic(dcr-access-method = %s)\n", prop);
+
+	if (!strcmp(prop, "native")) {
+		host.type = DCR_HOST_NATIVE;
+		host.host.native = dcr_map_native(dev, dcr_n, dcr_c);
+	} else if (!strcmp(prop, "mmio")) {
+		host.type = DCR_HOST_MMIO;
+		host.host.mmio = dcr_map_mmio(dev, dcr_n, dcr_c);
+	}
+
+	of_node_put(dp);
+	return host;
+}
+EXPORT_SYMBOL_GPL(dcr_map_generic);
+
+void dcr_unmap_generic(dcr_host_t host, unsigned int dcr_c)
+{
+	if (host.type == DCR_HOST_NATIVE)
+		dcr_unmap_native(host.host.native, dcr_c);
+	else if (host.type == DCR_HOST_MMIO)
+		dcr_unmap_mmio(host.host.mmio, dcr_c);
+	else /* host.type == DCR_HOST_INVALID */
+		WARN_ON(true);
+}
+EXPORT_SYMBOL_GPL(dcr_unmap_generic);
+
+u32 dcr_read_generic(dcr_host_t host, unsigned int dcr_n)
+{
+	if (host.type == DCR_HOST_NATIVE)
+		return dcr_read_native(host.host.native, dcr_n);
+	else if (host.type == DCR_HOST_MMIO)
+		return dcr_read_mmio(host.host.mmio, dcr_n);
+	else /* host.type == DCR_HOST_INVALID */
+		WARN_ON(true);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dcr_read_generic);
+
+void dcr_write_generic(dcr_host_t host, unsigned int dcr_n, u32 value)
+{
+	if (host.type == DCR_HOST_NATIVE)
+		dcr_write_native(host.host.native, dcr_n, value);
+	else if (host.type == DCR_HOST_MMIO)
+		dcr_write_mmio(host.host.mmio, dcr_n, value);
+	else /* host.type == DCR_HOST_INVALID */
+		WARN_ON(true);
+}
+EXPORT_SYMBOL_GPL(dcr_write_generic);
+
+#endif /* defined(CONFIG_PPC_DCR_NATIVE) && defined(CONFIG_PPC_DCR_MMIO) */
+
 unsigned int dcr_resource_start(struct device_node *np, unsigned int index)
 {
 	unsigned int ds;
@@ -47,26 +148,7 @@ unsigned int dcr_resource_len(struct device_node *np, unsigned int index)
 }
 EXPORT_SYMBOL_GPL(dcr_resource_len);
 
-#ifndef CONFIG_PPC_DCR_NATIVE
-
-static struct device_node * find_dcr_parent(struct device_node * node)
-{
-	struct device_node *par, *tmp;
-	const u32 *p;
-
-	for (par = of_node_get(node); par;) {
-		if (of_get_property(par, "dcr-controller", NULL))
-			break;
-		p = of_get_property(par, "dcr-parent", NULL);
-		tmp = par;
-		if (p == NULL)
-			par = of_get_parent(par);
-		else
-			par = of_find_node_by_phandle(*p);
-		of_node_put(tmp);
-	}
-	return par;
-}
+#ifdef CONFIG_PPC_DCR_MMIO
 
 u64 of_translate_dcr_address(struct device_node *dev,
 			     unsigned int dcr_n,
@@ -75,7 +157,7 @@ u64 of_translate_dcr_address(struct device_node *dev,
 	struct device_node *dp;
 	const u32 *p;
 	unsigned int stride;
-	u64 ret;
+	u64 ret = OF_BAD_ADDR;
 
 	dp = find_dcr_parent(dev);
 	if (dp == NULL)
@@ -90,7 +172,7 @@ u64 of_translate_dcr_address(struct device_node *dev,
 	if (p == NULL)
 		p = of_get_property(dp, "dcr-mmio-space", NULL);
 	if (p == NULL)
-		return OF_BAD_ADDR;
+		goto done;
 
 	/* Maybe could do some better range checking here */
 	ret = of_translate_address(dp, p);
@@ -98,21 +180,25 @@ u64 of_translate_dcr_address(struct device_node *dev,
 		ret += (u64)(stride) * (u64)dcr_n;
 	if (out_stride)
 		*out_stride = stride;
+
+ done:
+	of_node_put(dp);
 	return ret;
 }
 
-dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n,
-		   unsigned int dcr_c)
+dcr_host_mmio_t dcr_map_mmio(struct device_node *dev,
+			     unsigned int dcr_n,
+			     unsigned int dcr_c)
 {
-	dcr_host_t ret = { .token = NULL, .stride = 0, .base = dcr_n };
+	dcr_host_mmio_t ret = { .token = NULL, .stride = 0, .base = dcr_n };
 	u64 addr;
 
 	pr_debug("dcr_map(%s, 0x%x, 0x%x)\n",
 		 dev->full_name, dcr_n, dcr_c);
 
 	addr = of_translate_dcr_address(dev, dcr_n, &ret.stride);
-	pr_debug("translates to addr: 0x%lx, stride: 0x%x\n",
-		 addr, ret.stride);
+	pr_debug("translates to addr: 0x%llx, stride: 0x%x\n",
+		 (unsigned long long) addr, ret.stride);
 	if (addr == OF_BAD_ADDR)
 		return ret;
 	pr_debug("mapping 0x%x bytes\n", dcr_c * ret.stride);
@@ -124,11 +210,11 @@ dcr_host_t dcr_map(struct device_node *dev, unsigned int dcr_n,
 	ret.token -= dcr_n * ret.stride;
 	return ret;
 }
-EXPORT_SYMBOL_GPL(dcr_map);
+EXPORT_SYMBOL_GPL(dcr_map_mmio);
 
-void dcr_unmap(dcr_host_t host, unsigned int dcr_c)
+void dcr_unmap_mmio(dcr_host_mmio_t host, unsigned int dcr_c)
 {
-	dcr_host_t h = host;
+	dcr_host_mmio_t h = host;
 
 	if (h.token == NULL)
 		return;
@@ -136,7 +222,11 @@ void dcr_unmap(dcr_host_t host, unsigned int dcr_c)
 	iounmap(h.token);
 	h.token = NULL;
 }
-EXPORT_SYMBOL_GPL(dcr_unmap);
-#else	/* defined(CONFIG_PPC_DCR_NATIVE) */
+EXPORT_SYMBOL_GPL(dcr_unmap_mmio);
+
+#endif /* defined(CONFIG_PPC_DCR_MMIO) */
+
+#ifdef CONFIG_PPC_DCR_NATIVE
 DEFINE_SPINLOCK(dcr_ind_lock);
-#endif	/* !defined(CONFIG_PPC_DCR_NATIVE) */
+#endif	/* defined(CONFIG_PPC_DCR_NATIVE) */
+
diff --git a/arch/powerpc/sysdev/fsl_gtm.c b/arch/powerpc/sysdev/fsl_gtm.c
new file mode 100644
index 000000000000..714ec02fed2e
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_gtm.c
@@ -0,0 +1,434 @@
+/*
+ * Freescale General-purpose Timers Module
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/spinlock.h>
+#include <linux/bitops.h>
+#include <asm/fsl_gtm.h>
+
+#define GTCFR_STP(x)		((x) & 1 ? 1 << 5 : 1 << 1)
+#define GTCFR_RST(x)		((x) & 1 ? 1 << 4 : 1 << 0)
+
+#define GTMDR_ICLK_MASK		(3 << 1)
+#define GTMDR_ICLK_ICAS		(0 << 1)
+#define GTMDR_ICLK_ICLK		(1 << 1)
+#define GTMDR_ICLK_SLGO		(2 << 1)
+#define GTMDR_FRR		(1 << 3)
+#define GTMDR_ORI		(1 << 4)
+#define GTMDR_SPS(x)		((x) << 8)
+
+struct gtm_timers_regs {
+	u8	gtcfr1;		/* Timer 1, Timer 2 global config register */
+	u8	res0[0x3];
+	u8	gtcfr2;		/* Timer 3, timer 4 global config register */
+	u8	res1[0xB];
+	__be16	gtmdr1;		/* Timer 1 mode register */
+	__be16	gtmdr2;		/* Timer 2 mode register */
+	__be16	gtrfr1;		/* Timer 1 reference register */
+	__be16	gtrfr2;		/* Timer 2 reference register */
+	__be16	gtcpr1;		/* Timer 1 capture register */
+	__be16	gtcpr2;		/* Timer 2 capture register */
+	__be16	gtcnr1;		/* Timer 1 counter */
+	__be16	gtcnr2;		/* Timer 2 counter */
+	__be16	gtmdr3;		/* Timer 3 mode register */
+	__be16	gtmdr4;		/* Timer 4 mode register */
+	__be16	gtrfr3;		/* Timer 3 reference register */
+	__be16	gtrfr4;		/* Timer 4 reference register */
+	__be16	gtcpr3;		/* Timer 3 capture register */
+	__be16	gtcpr4;		/* Timer 4 capture register */
+	__be16	gtcnr3;		/* Timer 3 counter */
+	__be16	gtcnr4;		/* Timer 4 counter */
+	__be16	gtevr1;		/* Timer 1 event register */
+	__be16	gtevr2;		/* Timer 2 event register */
+	__be16	gtevr3;		/* Timer 3 event register */
+	__be16	gtevr4;		/* Timer 4 event register */
+	__be16	gtpsr1;		/* Timer 1 prescale register */
+	__be16	gtpsr2;		/* Timer 2 prescale register */
+	__be16	gtpsr3;		/* Timer 3 prescale register */
+	__be16	gtpsr4;		/* Timer 4 prescale register */
+	u8 res2[0x40];
+} __attribute__ ((packed));
+
+struct gtm {
+	unsigned int clock;
+	struct gtm_timers_regs __iomem *regs;
+	struct gtm_timer timers[4];
+	spinlock_t lock;
+	struct list_head list_node;
+};
+
+static LIST_HEAD(gtms);
+
+/**
+ * gtm_get_timer - request GTM timer to use it with the rest of GTM API
+ * Context:	non-IRQ
+ *
+ * This function reserves GTM timer for later use. It returns gtm_timer
+ * structure to use with the rest of GTM API, you should use timer->irq
+ * to manage timer interrupt.
+ */
+struct gtm_timer *gtm_get_timer16(void)
+{
+	struct gtm *gtm = NULL;
+	int i;
+
+	list_for_each_entry(gtm, &gtms, list_node) {
+		spin_lock_irq(&gtm->lock);
+
+		for (i = 0; i < ARRAY_SIZE(gtm->timers); i++) {
+			if (!gtm->timers[i].requested) {
+				gtm->timers[i].requested = true;
+				spin_unlock_irq(&gtm->lock);
+				return &gtm->timers[i];
+			}
+		}
+
+		spin_unlock_irq(&gtm->lock);
+	}
+
+	if (gtm)
+		return ERR_PTR(-EBUSY);
+	return ERR_PTR(-ENODEV);
+}
+EXPORT_SYMBOL(gtm_get_timer16);
+
+/**
+ * gtm_get_specific_timer - request specific GTM timer
+ * @gtm:	specific GTM, pass here GTM's device_node->data
+ * @timer:	specific timer number, Timer1 is 0.
+ * Context:	non-IRQ
+ *
+ * This function reserves GTM timer for later use. It returns gtm_timer
+ * structure to use with the rest of GTM API, you should use timer->irq
+ * to manage timer interrupt.
+ */
+struct gtm_timer *gtm_get_specific_timer16(struct gtm *gtm,
+					   unsigned int timer)
+{
+	struct gtm_timer *ret = ERR_PTR(-EBUSY);
+
+	if (timer > 3)
+		return ERR_PTR(-EINVAL);
+
+	spin_lock_irq(&gtm->lock);
+
+	if (gtm->timers[timer].requested)
+		goto out;
+
+	ret = &gtm->timers[timer];
+	ret->requested = true;
+
+out:
+	spin_unlock_irq(&gtm->lock);
+	return ret;
+}
+EXPORT_SYMBOL(gtm_get_specific_timer16);
+
+/**
+ * gtm_put_timer16 - release 16 bits GTM timer
+ * @tmr:	pointer to the gtm_timer structure obtained from gtm_get_timer
+ * Context:	any
+ *
+ * This function releases GTM timer so others may request it.
+ */
+void gtm_put_timer16(struct gtm_timer *tmr)
+{
+	gtm_stop_timer16(tmr);
+
+	spin_lock_irq(&tmr->gtm->lock);
+	tmr->requested = false;
+	spin_unlock_irq(&tmr->gtm->lock);
+}
+EXPORT_SYMBOL(gtm_put_timer16);
+
+/*
+ * This is back-end for the exported functions, it's used to reset single
+ * timer in reference mode.
+ */
+static int gtm_set_ref_timer16(struct gtm_timer *tmr, int frequency,
+			       int reference_value, bool free_run)
+{
+	struct gtm *gtm = tmr->gtm;
+	int num = tmr - &gtm->timers[0];
+	unsigned int prescaler;
+	u8 iclk = GTMDR_ICLK_ICLK;
+	u8 psr;
+	u8 sps;
+	unsigned long flags;
+	int max_prescaler = 256 * 256 * 16;
+
+	/* CPM2 doesn't have primary prescaler */
+	if (!tmr->gtpsr)
+		max_prescaler /= 256;
+
+	prescaler = gtm->clock / frequency;
+	/*
+	 * We have two 8 bit prescalers -- primary and secondary (psr, sps),
+	 * plus "slow go" mode (clk / 16). So, total prescale value is
+	 * 16 * (psr + 1) * (sps + 1). Though, for CPM2 GTMs we losing psr.
+	 */
+	if (prescaler > max_prescaler)
+		return -EINVAL;
+
+	if (prescaler > max_prescaler / 16) {
+		iclk = GTMDR_ICLK_SLGO;
+		prescaler /= 16;
+	}
+
+	if (prescaler <= 256) {
+		psr = 0;
+		sps = prescaler - 1;
+	} else {
+		psr = 256 - 1;
+		sps = prescaler / 256 - 1;
+	}
+
+	spin_lock_irqsave(&gtm->lock, flags);
+
+	/*
+	 * Properly reset timers: stop, reset, set up prescalers, reference
+	 * value and clear event register.
+	 */
+	clrsetbits_8(tmr->gtcfr, ~(GTCFR_STP(num) | GTCFR_RST(num)),
+				 GTCFR_STP(num) | GTCFR_RST(num));
+
+	setbits8(tmr->gtcfr, GTCFR_STP(num));
+
+	if (tmr->gtpsr)
+		out_be16(tmr->gtpsr, psr);
+	clrsetbits_be16(tmr->gtmdr, 0xFFFF, iclk | GTMDR_SPS(sps) |
+			GTMDR_ORI | (free_run ? GTMDR_FRR : 0));
+	out_be16(tmr->gtcnr, 0);
+	out_be16(tmr->gtrfr, reference_value);
+	out_be16(tmr->gtevr, 0xFFFF);
+
+	/* Let it be. */
+	clrbits8(tmr->gtcfr, GTCFR_STP(num));
+
+	spin_unlock_irqrestore(&gtm->lock, flags);
+
+	return 0;
+}
+
+/**
+ * gtm_set_timer16 - (re)set 16 bit timer with arbitrary precision
+ * @tmr:	pointer to the gtm_timer structure obtained from gtm_get_timer
+ * @usec:	timer interval in microseconds
+ * @reload:	if set, the timer will reset upon expiry rather than
+ *         	continue running free.
+ * Context:	any
+ *
+ * This function (re)sets the GTM timer so that it counts up to the requested
+ * interval value, and fires the interrupt when the value is reached. This
+ * function will reduce the precision of the timer as needed in order for the
+ * requested timeout to fit in a 16-bit register.
+ */
+int gtm_set_timer16(struct gtm_timer *tmr, unsigned long usec, bool reload)
+{
+	/* quite obvious, frequency which is enough for µSec precision */
+	int freq = 1000000;
+	unsigned int bit;
+
+	bit = fls_long(usec);
+	if (bit > 15) {
+		freq >>= bit - 15;
+		usec >>= bit - 15;
+	}
+
+	if (!freq)
+		return -EINVAL;
+
+	return gtm_set_ref_timer16(tmr, freq, usec, reload);
+}
+EXPORT_SYMBOL(gtm_set_timer16);
+
+/**
+ * gtm_set_exact_utimer16 - (re)set 16 bits timer
+ * @tmr:	pointer to the gtm_timer structure obtained from gtm_get_timer
+ * @usec:	timer interval in microseconds
+ * @reload:	if set, the timer will reset upon expiry rather than
+ *         	continue running free.
+ * Context:	any
+ *
+ * This function (re)sets GTM timer so that it counts up to the requested
+ * interval value, and fires the interrupt when the value is reached. If reload
+ * flag was set, timer will also reset itself upon reference value, otherwise
+ * it continues to increment.
+ *
+ * The _exact_ bit in the function name states that this function will not
+ * crop precision of the "usec" argument, thus usec is limited to 16 bits
+ * (single timer width).
+ */
+int gtm_set_exact_timer16(struct gtm_timer *tmr, u16 usec, bool reload)
+{
+	/* quite obvious, frequency which is enough for µSec precision */
+	const int freq = 1000000;
+
+	/*
+	 * We can lower the frequency (and probably power consumption) by
+	 * dividing both frequency and usec by 2 until there is no remainder.
+	 * But we won't bother with this unless savings are measured, so just
+	 * run the timer as is.
+	 */
+
+	return gtm_set_ref_timer16(tmr, freq, usec, reload);
+}
+EXPORT_SYMBOL(gtm_set_exact_timer16);
+
+/**
+ * gtm_stop_timer16 - stop single timer
+ * @tmr:	pointer to the gtm_timer structure obtained from gtm_get_timer
+ * Context:	any
+ *
+ * This function simply stops the GTM timer.
+ */
+void gtm_stop_timer16(struct gtm_timer *tmr)
+{
+	struct gtm *gtm = tmr->gtm;
+	int num = tmr - &gtm->timers[0];
+	unsigned long flags;
+
+	spin_lock_irqsave(&gtm->lock, flags);
+
+	setbits8(tmr->gtcfr, GTCFR_STP(num));
+	out_be16(tmr->gtevr, 0xFFFF);
+
+	spin_unlock_irqrestore(&gtm->lock, flags);
+}
+EXPORT_SYMBOL(gtm_stop_timer16);
+
+/**
+ * gtm_ack_timer16 - acknowledge timer event (free-run timers only)
+ * @tmr:	pointer to the gtm_timer structure obtained from gtm_get_timer
+ * @events:	events mask to ack
+ * Context:	any
+ *
+ * Thus function used to acknowledge timer interrupt event, use it inside the
+ * interrupt handler.
+ */
+void gtm_ack_timer16(struct gtm_timer *tmr, u16 events)
+{
+	out_be16(tmr->gtevr, events);
+}
+EXPORT_SYMBOL(gtm_ack_timer16);
+
+static void __init gtm_set_shortcuts(struct device_node *np,
+				     struct gtm_timer *timers,
+				     struct gtm_timers_regs __iomem *regs)
+{
+	/*
+	 * Yeah, I don't like this either, but timers' registers a bit messed,
+	 * so we have to provide shortcuts to write timer independent code.
+	 * Alternative option is to create gt*() accessors, but that will be
+	 * even uglier and cryptic.
+	 */
+	timers[0].gtcfr = &regs->gtcfr1;
+	timers[0].gtmdr = &regs->gtmdr1;
+	timers[0].gtcnr = &regs->gtcnr1;
+	timers[0].gtrfr = &regs->gtrfr1;
+	timers[0].gtevr = &regs->gtevr1;
+
+	timers[1].gtcfr = &regs->gtcfr1;
+	timers[1].gtmdr = &regs->gtmdr2;
+	timers[1].gtcnr = &regs->gtcnr2;
+	timers[1].gtrfr = &regs->gtrfr2;
+	timers[1].gtevr = &regs->gtevr2;
+
+	timers[2].gtcfr = &regs->gtcfr2;
+	timers[2].gtmdr = &regs->gtmdr3;
+	timers[2].gtcnr = &regs->gtcnr3;
+	timers[2].gtrfr = &regs->gtrfr3;
+	timers[2].gtevr = &regs->gtevr3;
+
+	timers[3].gtcfr = &regs->gtcfr2;
+	timers[3].gtmdr = &regs->gtmdr4;
+	timers[3].gtcnr = &regs->gtcnr4;
+	timers[3].gtrfr = &regs->gtrfr4;
+	timers[3].gtevr = &regs->gtevr4;
+
+	/* CPM2 doesn't have primary prescaler */
+	if (!of_device_is_compatible(np, "fsl,cpm2-gtm")) {
+		timers[0].gtpsr = &regs->gtpsr1;
+		timers[1].gtpsr = &regs->gtpsr2;
+		timers[2].gtpsr = &regs->gtpsr3;
+		timers[3].gtpsr = &regs->gtpsr4;
+	}
+}
+
+static int __init fsl_gtm_init(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,gtm") {
+		int i;
+		struct gtm *gtm;
+		const u32 *clock;
+		int size;
+
+		gtm = kzalloc(sizeof(*gtm), GFP_KERNEL);
+		if (!gtm) {
+			pr_err("%s: unable to allocate memory\n",
+				np->full_name);
+			continue;
+		}
+
+		spin_lock_init(&gtm->lock);
+
+		clock = of_get_property(np, "clock-frequency", &size);
+		if (!clock || size != sizeof(*clock)) {
+			pr_err("%s: no clock-frequency\n", np->full_name);
+			goto err;
+		}
+		gtm->clock = *clock;
+
+		for (i = 0; i < ARRAY_SIZE(gtm->timers); i++) {
+			int ret;
+			struct resource irq;
+
+			ret = of_irq_to_resource(np, i, &irq);
+			if (ret == NO_IRQ) {
+				pr_err("%s: not enough interrupts specified\n",
+				       np->full_name);
+				goto err;
+			}
+			gtm->timers[i].irq = irq.start;
+			gtm->timers[i].gtm = gtm;
+		}
+
+		gtm->regs = of_iomap(np, 0);
+		if (!gtm->regs) {
+			pr_err("%s: unable to iomap registers\n",
+			       np->full_name);
+			goto err;
+		}
+
+		gtm_set_shortcuts(np, gtm->timers, gtm->regs);
+		list_add(&gtm->list_node, &gtms);
+
+		/* We don't want to lose the node and its ->data */
+		np->data = gtm;
+		of_node_get(np);
+
+		continue;
+err:
+		kfree(gtm);
+	}
+	return 0;
+}
+arch_initcall(fsl_gtm_init);
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
new file mode 100644
index 000000000000..2c5187cc8a24
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -0,0 +1,429 @@
+/*
+ * Copyright (C) 2007-2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Tony Li <tony.li@freescale.com>
+ *	   Jason Jin <Jason.jin@freescale.com>
+ *
+ * The hwirq alloc and free code reuse from sysdev/mpic_msi.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+#include <linux/irq.h>
+#include <linux/bootmem.h>
+#include <linux/bitmap.h>
+#include <linux/msi.h>
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+#include <sysdev/fsl_soc.h>
+#include <asm/prom.h>
+#include <asm/hw_irq.h>
+#include <asm/ppc-pci.h>
+#include "fsl_msi.h"
+
+struct fsl_msi_feature {
+	u32 fsl_pic_ip;
+	u32 msiir_offset;
+};
+
+static struct fsl_msi *fsl_msi;
+
+static inline u32 fsl_msi_read(u32 __iomem *base, unsigned int reg)
+{
+	return in_be32(base + (reg >> 2));
+}
+
+/*
+ * We do not need this actually. The MSIR register has been read once
+ * in the cascade interrupt. So, this MSI interrupt has been acked
+*/
+static void fsl_msi_end_irq(unsigned int virq)
+{
+}
+
+static struct irq_chip fsl_msi_chip = {
+	.mask		= mask_msi_irq,
+	.unmask		= unmask_msi_irq,
+	.ack		= fsl_msi_end_irq,
+	.typename	= " FSL-MSI  ",
+};
+
+static int fsl_msi_host_map(struct irq_host *h, unsigned int virq,
+				irq_hw_number_t hw)
+{
+	struct irq_chip *chip = &fsl_msi_chip;
+
+	get_irq_desc(virq)->status |= IRQ_TYPE_EDGE_FALLING;
+
+	set_irq_chip_and_handler(virq, chip, handle_edge_irq);
+
+	return 0;
+}
+
+static struct irq_host_ops fsl_msi_host_ops = {
+	.map = fsl_msi_host_map,
+};
+
+static irq_hw_number_t fsl_msi_alloc_hwirqs(struct fsl_msi *msi, int num)
+{
+	unsigned long flags;
+	int order = get_count_order(num);
+	int offset;
+
+	spin_lock_irqsave(&msi->bitmap_lock, flags);
+
+	offset = bitmap_find_free_region(msi->fsl_msi_bitmap,
+					NR_MSI_IRQS, order);
+
+	spin_unlock_irqrestore(&msi->bitmap_lock, flags);
+
+	pr_debug("%s: allocated 0x%x (2^%d) at offset 0x%x\n",
+		__func__, num, order, offset);
+
+	return offset;
+}
+
+static void fsl_msi_free_hwirqs(struct fsl_msi *msi, int offset, int num)
+{
+	unsigned long flags;
+	int order = get_count_order(num);
+
+	pr_debug("%s: freeing 0x%x (2^%d) at offset 0x%x\n",
+		__func__, num, order, offset);
+
+	spin_lock_irqsave(&msi->bitmap_lock, flags);
+	bitmap_release_region(msi->fsl_msi_bitmap, offset, order);
+	spin_unlock_irqrestore(&msi->bitmap_lock, flags);
+}
+
+static int fsl_msi_free_dt_hwirqs(struct fsl_msi *msi)
+{
+	int i;
+	int len;
+	const u32 *p;
+
+	bitmap_allocate_region(msi->fsl_msi_bitmap, 0,
+		       get_count_order(NR_MSI_IRQS));
+
+	p = of_get_property(msi->of_node, "msi-available-ranges", &len);
+
+	if (!p) {
+		/* No msi-available-ranges property,
+		 * All the 256 MSI interrupts can be used
+		 */
+		fsl_msi_free_hwirqs(msi, 0, 0x100);
+		return 0;
+	}
+
+	if ((len % (2 * sizeof(u32))) != 0) {
+		printk(KERN_WARNING "fsl_msi: Malformed msi-available-ranges "
+		       "property on %s\n", msi->of_node->full_name);
+		return -EINVAL;
+	}
+
+	/* Format is: (<u32 start> <u32 count>)+ */
+	len /= 2 * sizeof(u32);
+	for (i = 0; i < len; i++, p += 2)
+		fsl_msi_free_hwirqs(msi, *p, *(p + 1));
+
+	return 0;
+}
+
+static int fsl_msi_init_allocator(struct fsl_msi *msi_data)
+{
+	int rc;
+	int size = BITS_TO_LONGS(NR_MSI_IRQS) * sizeof(u32);
+
+	msi_data->fsl_msi_bitmap = kzalloc(size, GFP_KERNEL);
+
+	if (msi_data->fsl_msi_bitmap == NULL) {
+		pr_debug("%s: ENOMEM allocating allocator bitmap!\n",
+				__func__);
+		return -ENOMEM;
+	}
+
+	rc = fsl_msi_free_dt_hwirqs(msi_data);
+	if (rc)
+		goto out_free;
+
+	return 0;
+out_free:
+	kfree(msi_data->fsl_msi_bitmap);
+
+	msi_data->fsl_msi_bitmap = NULL;
+	return rc;
+
+}
+
+static int fsl_msi_check_device(struct pci_dev *pdev, int nvec, int type)
+{
+	if (type == PCI_CAP_ID_MSIX)
+		pr_debug("fslmsi: MSI-X untested, trying anyway.\n");
+
+	return 0;
+}
+
+static void fsl_teardown_msi_irqs(struct pci_dev *pdev)
+{
+	struct msi_desc *entry;
+	struct fsl_msi *msi_data = fsl_msi;
+
+	list_for_each_entry(entry, &pdev->msi_list, list) {
+		if (entry->irq == NO_IRQ)
+			continue;
+		set_irq_msi(entry->irq, NULL);
+		fsl_msi_free_hwirqs(msi_data, virq_to_hw(entry->irq), 1);
+		irq_dispose_mapping(entry->irq);
+	}
+
+	return;
+}
+
+static void fsl_compose_msi_msg(struct pci_dev *pdev, int hwirq,
+				  struct msi_msg *msg)
+{
+	struct fsl_msi *msi_data = fsl_msi;
+
+	msg->address_lo = msi_data->msi_addr_lo;
+	msg->address_hi = msi_data->msi_addr_hi;
+	msg->data = hwirq;
+
+	pr_debug("%s: allocated srs: %d, ibs: %d\n",
+		__func__, hwirq / IRQS_PER_MSI_REG, hwirq % IRQS_PER_MSI_REG);
+}
+
+static int fsl_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
+{
+	irq_hw_number_t hwirq;
+	int rc;
+	unsigned int virq;
+	struct msi_desc *entry;
+	struct msi_msg msg;
+	struct fsl_msi *msi_data = fsl_msi;
+
+	list_for_each_entry(entry, &pdev->msi_list, list) {
+		hwirq = fsl_msi_alloc_hwirqs(msi_data, 1);
+		if (hwirq < 0) {
+			rc = hwirq;
+			pr_debug("%s: fail allocating msi interrupt\n",
+					__func__);
+			goto out_free;
+		}
+
+		virq = irq_create_mapping(msi_data->irqhost, hwirq);
+
+		if (virq == NO_IRQ) {
+			pr_debug("%s: fail mapping hwirq 0x%lx\n",
+					__func__, hwirq);
+			fsl_msi_free_hwirqs(msi_data, hwirq, 1);
+			rc = -ENOSPC;
+			goto out_free;
+		}
+		set_irq_msi(virq, entry);
+
+		fsl_compose_msi_msg(pdev, hwirq, &msg);
+		write_msi_msg(virq, &msg);
+	}
+	return 0;
+
+out_free:
+	return rc;
+}
+
+static void fsl_msi_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int cascade_irq;
+	struct fsl_msi *msi_data = fsl_msi;
+	int msir_index = -1;
+	u32 msir_value = 0;
+	u32 intr_index;
+	u32 have_shift = 0;
+
+	spin_lock(&desc->lock);
+	if ((msi_data->feature &  FSL_PIC_IP_MASK) == FSL_PIC_IP_IPIC) {
+		if (desc->chip->mask_ack)
+			desc->chip->mask_ack(irq);
+		else {
+			desc->chip->mask(irq);
+			desc->chip->ack(irq);
+		}
+	}
+
+	if (unlikely(desc->status & IRQ_INPROGRESS))
+		goto unlock;
+
+	msir_index = (int)desc->handler_data;
+
+	if (msir_index >= NR_MSI_REG)
+		cascade_irq = NO_IRQ;
+
+	desc->status |= IRQ_INPROGRESS;
+	switch (fsl_msi->feature & FSL_PIC_IP_MASK) {
+	case FSL_PIC_IP_MPIC:
+		msir_value = fsl_msi_read(msi_data->msi_regs,
+			msir_index * 0x10);
+		break;
+	case FSL_PIC_IP_IPIC:
+		msir_value = fsl_msi_read(msi_data->msi_regs, msir_index * 0x4);
+		break;
+	}
+
+	while (msir_value) {
+		intr_index = ffs(msir_value) - 1;
+
+		cascade_irq = irq_linear_revmap(msi_data->irqhost,
+				msir_index * IRQS_PER_MSI_REG +
+					intr_index + have_shift);
+		if (cascade_irq != NO_IRQ)
+			generic_handle_irq(cascade_irq);
+		have_shift += intr_index + 1;
+		msir_value = msir_value >> (intr_index + 1);
+	}
+	desc->status &= ~IRQ_INPROGRESS;
+
+	switch (msi_data->feature & FSL_PIC_IP_MASK) {
+	case FSL_PIC_IP_MPIC:
+		desc->chip->eoi(irq);
+		break;
+	case FSL_PIC_IP_IPIC:
+		if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
+			desc->chip->unmask(irq);
+		break;
+	}
+unlock:
+	spin_unlock(&desc->lock);
+}
+
+static int __devinit fsl_of_msi_probe(struct of_device *dev,
+				const struct of_device_id *match)
+{
+	struct fsl_msi *msi;
+	struct resource res;
+	int err, i, count;
+	int rc;
+	int virt_msir;
+	const u32 *p;
+	struct fsl_msi_feature *features = match->data;
+
+	printk(KERN_DEBUG "Setting up Freescale MSI support\n");
+
+	msi = kzalloc(sizeof(struct fsl_msi), GFP_KERNEL);
+	if (!msi) {
+		dev_err(&dev->dev, "No memory for MSI structure\n");
+		err = -ENOMEM;
+		goto error_out;
+	}
+
+	msi->of_node = of_node_get(dev->node);
+
+	msi->irqhost = irq_alloc_host(of_node_get(dev->node),
+				IRQ_HOST_MAP_LINEAR,
+				NR_MSI_IRQS, &fsl_msi_host_ops, 0);
+	if (msi->irqhost == NULL) {
+		dev_err(&dev->dev, "No memory for MSI irqhost\n");
+		of_node_put(dev->node);
+		err = -ENOMEM;
+		goto error_out;
+	}
+
+	/* Get the MSI reg base */
+	err = of_address_to_resource(dev->node, 0, &res);
+	if (err) {
+		dev_err(&dev->dev, "%s resource error!\n",
+				dev->node->full_name);
+		goto error_out;
+	}
+
+	msi->msi_regs = ioremap(res.start, res.end - res.start + 1);
+	if (!msi->msi_regs) {
+		dev_err(&dev->dev, "ioremap problem failed\n");
+		goto error_out;
+	}
+
+	msi->feature = features->fsl_pic_ip;
+
+	msi->irqhost->host_data = msi;
+
+	msi->msi_addr_hi = 0x0;
+	msi->msi_addr_lo = res.start + features->msiir_offset;
+
+	rc = fsl_msi_init_allocator(msi);
+	if (rc) {
+		dev_err(&dev->dev, "Error allocating MSI bitmap\n");
+		goto error_out;
+	}
+
+	p = of_get_property(dev->node, "interrupts", &count);
+	if (!p) {
+		dev_err(&dev->dev, "no interrupts property found on %s\n",
+				dev->node->full_name);
+		err = -ENODEV;
+		goto error_out;
+	}
+	if (count % 8 != 0) {
+		dev_err(&dev->dev, "Malformed interrupts property on %s\n",
+				dev->node->full_name);
+		err = -EINVAL;
+		goto error_out;
+	}
+
+	count /= sizeof(u32);
+	for (i = 0; i < count / 2; i++) {
+		if (i > NR_MSI_REG)
+			break;
+		virt_msir = irq_of_parse_and_map(dev->node, i);
+		if (virt_msir != NO_IRQ) {
+			set_irq_data(virt_msir, (void *)i);
+			set_irq_chained_handler(virt_msir, fsl_msi_cascade);
+		}
+	}
+
+	fsl_msi = msi;
+
+	WARN_ON(ppc_md.setup_msi_irqs);
+	ppc_md.setup_msi_irqs = fsl_setup_msi_irqs;
+	ppc_md.teardown_msi_irqs = fsl_teardown_msi_irqs;
+	ppc_md.msi_check_device = fsl_msi_check_device;
+	return 0;
+error_out:
+	kfree(msi);
+	return err;
+}
+
+static const struct fsl_msi_feature mpic_msi_feature = {
+	.fsl_pic_ip = FSL_PIC_IP_MPIC,
+	.msiir_offset = 0x140,
+};
+
+static const struct fsl_msi_feature ipic_msi_feature = {
+	.fsl_pic_ip = FSL_PIC_IP_IPIC,
+	.msiir_offset = 0x38,
+};
+
+static const struct of_device_id fsl_of_msi_ids[] = {
+	{
+		.compatible = "fsl,mpic-msi",
+		.data = (void *)&mpic_msi_feature,
+	},
+	{
+		.compatible = "fsl,ipic-msi",
+		.data = (void *)&ipic_msi_feature,
+	},
+	{}
+};
+
+static struct of_platform_driver fsl_of_msi_driver = {
+	.name = "fsl-msi",
+	.match_table = fsl_of_msi_ids,
+	.probe = fsl_of_msi_probe,
+};
+
+static __init int fsl_of_msi_init(void)
+{
+	return of_register_platform_driver(&fsl_of_msi_driver);
+}
+
+subsys_initcall(fsl_of_msi_init);
diff --git a/arch/powerpc/sysdev/fsl_msi.h b/arch/powerpc/sysdev/fsl_msi.h
new file mode 100644
index 000000000000..a653468521fa
--- /dev/null
+++ b/arch/powerpc/sysdev/fsl_msi.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2007-2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Tony Li <tony.li@freescale.com>
+ *	   Jason Jin <Jason.jin@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ */
+#ifndef _POWERPC_SYSDEV_FSL_MSI_H
+#define _POWERPC_SYSDEV_FSL_MSI_H
+
+#define NR_MSI_REG		8
+#define IRQS_PER_MSI_REG	32
+#define NR_MSI_IRQS	(NR_MSI_REG * IRQS_PER_MSI_REG)
+
+#define FSL_PIC_IP_MASK	0x0000000F
+#define FSL_PIC_IP_MPIC	0x00000001
+#define FSL_PIC_IP_IPIC	0x00000002
+
+struct fsl_msi {
+	/* Device node of the MSI interrupt*/
+	struct device_node *of_node;
+
+	struct irq_host *irqhost;
+
+	unsigned long cascade_irq;
+
+	u32 msi_addr_lo;
+	u32 msi_addr_hi;
+	void __iomem *msi_regs;
+	u32 feature;
+
+	unsigned long *fsl_msi_bitmap;
+	spinlock_t bitmap_lock;
+};
+
+#endif /* _POWERPC_SYSDEV_FSL_MSI_H */
+
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index bf13c2174a4e..61e6d77efa4f 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -27,6 +27,7 @@
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
 
+#if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx)
 /* atmu setup for fsl pci/pcie controller */
 void __init setup_pci_atmu(struct pci_controller *hose, struct resource *rsrc)
 {
@@ -106,6 +107,16 @@ void __init setup_pci_cmd(struct pci_controller *hose)
 	}
 }
 
+static void __init setup_pci_pcsrbar(struct pci_controller *hose)
+{
+#ifdef CONFIG_PCI_MSI
+	phys_addr_t immr_base;
+
+	immr_base = get_immrbase();
+	early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, immr_base);
+#endif
+}
+
 static int fsl_pcie_bus_fixup;
 
 static void __init quirk_fsl_pcie_header(struct pci_dev *dev)
@@ -211,6 +222,8 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
 	/* Setup PEX window registers */
 	setup_pci_atmu(hose, &rsrc);
 
+	/* Setup PEXCSRBAR */
+	setup_pci_pcsrbar(hose);
 	return 0;
 }
 
@@ -231,6 +244,68 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572E, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8572, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
+#endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
+
+#if defined(CONFIG_PPC_83xx)
+int __init mpc83xx_add_bridge(struct device_node *dev)
+{
+	int len;
+	struct pci_controller *hose;
+	struct resource rsrc;
+	const int *bus_range;
+	int primary = 1, has_address = 0;
+	phys_addr_t immr = get_immrbase();
+
+	pr_debug("Adding PCI host bridge %s\n", dev->full_name);
+
+	/* Fetch host bridge registers address */
+	has_address = (of_address_to_resource(dev, 0, &rsrc) == 0);
+
+	/* Get bus range if any */
+	bus_range = of_get_property(dev, "bus-range", &len);
+	if (bus_range == NULL || len < 2 * sizeof(int)) {
+		printk(KERN_WARNING "Can't get bus-range for %s, assume"
+		       " bus 0\n", dev->full_name);
+	}
+
+	ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
+	hose = pcibios_alloc_controller(dev);
+	if (!hose)
+		return -ENOMEM;
+
+	hose->first_busno = bus_range ? bus_range[0] : 0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	/* MPC83xx supports up to two host controllers one at 0x8500 from immrbar
+	 * the other at 0x8600, we consider the 0x8500 the primary controller
+	 */
+	/* PCI 1 */
+	if ((rsrc.start & 0xfffff) == 0x8500) {
+		setup_indirect_pci(hose, immr + 0x8300, immr + 0x8304, 0);
+	}
+	/* PCI 2 */
+	if ((rsrc.start & 0xfffff) == 0x8600) {
+		setup_indirect_pci(hose, immr + 0x8380, immr + 0x8384, 0);
+		primary = 0;
+	}
+
+	printk(KERN_INFO "Found MPC83xx PCI host bridge at 0x%016llx. "
+	       "Firmware bus number: %d->%d\n",
+	       (unsigned long long)rsrc.start, hose->first_busno,
+	       hose->last_busno);
+
+	pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+	    hose, hose->cfg_addr, hose->cfg_data);
+
+	/* Interpret the "ranges" property */
+	/* This also maps the I/O region and sets isa_io/mem_base */
+	pci_process_bridge_OF_ranges(hose, dev, primary);
+
+	return 0;
+}
+#endif /* CONFIG_PPC_83xx */
diff --git a/arch/powerpc/sysdev/fsl_pci.h b/arch/powerpc/sysdev/fsl_pci.h
index 37b04ad26571..13f30c2a61e7 100644
--- a/arch/powerpc/sysdev/fsl_pci.h
+++ b/arch/powerpc/sysdev/fsl_pci.h
@@ -83,6 +83,7 @@ struct ccsr_pci {
 
 extern int fsl_add_bridge(struct device_node *dev, int is_primary);
 extern void fsl_pcibios_fixup_bus(struct pci_bus *bus);
+extern int mpc83xx_add_bridge(struct device_node *dev);
 
 #endif /* __POWERPC_FSL_PCI_H */
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 019657c110b6..214388e11807 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -207,66 +207,58 @@ static int __init of_add_fixed_phys(void)
 arch_initcall(of_add_fixed_phys);
 #endif /* CONFIG_FIXED_PHY */
 
-static int __init gfar_mdio_of_init(void)
+static int gfar_mdio_of_init_one(struct device_node *np)
 {
-	struct device_node *np = NULL;
+	int k;
+	struct device_node *child = NULL;
+	struct gianfar_mdio_data mdio_data;
 	struct platform_device *mdio_dev;
 	struct resource res;
 	int ret;
 
-	np = of_find_compatible_node(np, NULL, "fsl,gianfar-mdio");
-
-	/* try the deprecated version */
-	if (!np)
-		np = of_find_compatible_node(np, "mdio", "gianfar");
+	memset(&res, 0, sizeof(res));
+	memset(&mdio_data, 0, sizeof(mdio_data));
 
-	if (np) {
-		int k;
-		struct device_node *child = NULL;
-		struct gianfar_mdio_data mdio_data;
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		return ret;
 
-		memset(&res, 0, sizeof(res));
-		memset(&mdio_data, 0, sizeof(mdio_data));
+	mdio_dev = platform_device_register_simple("fsl-gianfar_mdio",
+			res.start&0xfffff, &res, 1);
+	if (IS_ERR(mdio_dev))
+		return PTR_ERR(mdio_dev);
 
-		ret = of_address_to_resource(np, 0, &res);
-		if (ret)
-			goto err;
+	for (k = 0; k < 32; k++)
+		mdio_data.irq[k] = PHY_POLL;
 
-		mdio_dev =
-		    platform_device_register_simple("fsl-gianfar_mdio",
-						    res.start, &res, 1);
-		if (IS_ERR(mdio_dev)) {
-			ret = PTR_ERR(mdio_dev);
-			goto err;
+	while ((child = of_get_next_child(np, child)) != NULL) {
+		int irq = irq_of_parse_and_map(child, 0);
+		if (irq != NO_IRQ) {
+			const u32 *id = of_get_property(child, "reg", NULL);
+			mdio_data.irq[*id] = irq;
 		}
+	}
 
-		for (k = 0; k < 32; k++)
-			mdio_data.irq[k] = PHY_POLL;
+	ret = platform_device_add_data(mdio_dev, &mdio_data,
+				sizeof(struct gianfar_mdio_data));
+	if (ret)
+		platform_device_unregister(mdio_dev);
 
-		while ((child = of_get_next_child(np, child)) != NULL) {
-			int irq = irq_of_parse_and_map(child, 0);
-			if (irq != NO_IRQ) {
-				const u32 *id = of_get_property(child,
-							"reg", NULL);
-				mdio_data.irq[*id] = irq;
-			}
-		}
+	return ret;
+}
 
-		ret =
-		    platform_device_add_data(mdio_dev, &mdio_data,
-					     sizeof(struct gianfar_mdio_data));
-		if (ret)
-			goto unreg;
-	}
+static int __init gfar_mdio_of_init(void)
+{
+	struct device_node *np = NULL;
 
-	of_node_put(np);
-	return 0;
+	for_each_compatible_node(np, NULL, "fsl,gianfar-mdio")
+		gfar_mdio_of_init_one(np);
 
-unreg:
-	platform_device_unregister(mdio_dev);
-err:
-	of_node_put(np);
-	return ret;
+	/* try the deprecated version */
+	for_each_compatible_node(np, "mdio", "gianfar");
+		gfar_mdio_of_init_one(np);
+
+	return 0;
 }
 
 arch_initcall(gfar_mdio_of_init);
@@ -296,6 +288,9 @@ static int __init gfar_of_init(void)
 		const phandle *ph;
 		int n_res = 2;
 
+		if (!of_device_is_available(np))
+			continue;
+
 		memset(r, 0, sizeof(r));
 		memset(&gfar_data, 0, sizeof(gfar_data));
 
@@ -357,6 +352,9 @@ static int __init gfar_of_init(void)
 		else
 			gfar_data.interface = PHY_INTERFACE_MODE_MII;
 
+		if (of_get_property(np, "fsl,magic-packet", NULL))
+			gfar_data.device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
+
 		ph = of_get_property(np, "phy-handle", NULL);
 		if (ph == NULL) {
 			u32 *fixed_link;
@@ -390,7 +388,7 @@ static int __init gfar_of_init(void)
 
 			gfar_data.phy_id = *id;
 			snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%llx",
-				 (unsigned long long)res.start);
+				 (unsigned long long)res.start&0xfffff);
 
 			of_node_put(phy);
 			of_node_put(mdio);
@@ -414,128 +412,6 @@ err:
 
 arch_initcall(gfar_of_init);
 
-#ifdef CONFIG_I2C_BOARDINFO
-#include <linux/i2c.h>
-struct i2c_driver_device {
-	char	*of_device;
-	char	*i2c_type;
-};
-
-static struct i2c_driver_device i2c_devices[] __initdata = {
-	{"ricoh,rs5c372a", "rs5c372a"},
-	{"ricoh,rs5c372b", "rs5c372b"},
-	{"ricoh,rv5c386",  "rv5c386"},
-	{"ricoh,rv5c387a", "rv5c387a"},
-	{"dallas,ds1307",  "ds1307"},
-	{"dallas,ds1337",  "ds1337"},
-	{"dallas,ds1338",  "ds1338"},
-	{"dallas,ds1339",  "ds1339"},
-	{"dallas,ds1340",  "ds1340"},
-	{"stm,m41t00",     "m41t00"},
-	{"dallas,ds1374",  "ds1374"},
-};
-
-static int __init of_find_i2c_driver(struct device_node *node,
-				     struct i2c_board_info *info)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) {
-		if (!of_device_is_compatible(node, i2c_devices[i].of_device))
-			continue;
-		if (strlcpy(info->type, i2c_devices[i].i2c_type,
-			    I2C_NAME_SIZE) >= I2C_NAME_SIZE)
-			return -ENOMEM;
-		return 0;
-	}
-	return -ENODEV;
-}
-
-static void __init of_register_i2c_devices(struct device_node *adap_node,
-					   int bus_num)
-{
-	struct device_node *node = NULL;
-
-	while ((node = of_get_next_child(adap_node, node))) {
-		struct i2c_board_info info = {};
-		const u32 *addr;
-		int len;
-
-		addr = of_get_property(node, "reg", &len);
-		if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) {
-			printk(KERN_WARNING "fsl_soc.c: invalid i2c device entry\n");
-			continue;
-		}
-
-		info.irq = irq_of_parse_and_map(node, 0);
-		if (info.irq == NO_IRQ)
-			info.irq = -1;
-
-		if (of_find_i2c_driver(node, &info) < 0)
-			continue;
-
-		info.addr = *addr;
-
-		i2c_register_board_info(bus_num, &info, 1);
-	}
-}
-
-static int __init fsl_i2c_of_init(void)
-{
-	struct device_node *np;
-	unsigned int i = 0;
-	struct platform_device *i2c_dev;
-	int ret;
-
-	for_each_compatible_node(np, NULL, "fsl-i2c") {
-		struct resource r[2];
-		struct fsl_i2c_platform_data i2c_data;
-		const unsigned char *flags = NULL;
-
-		memset(&r, 0, sizeof(r));
-		memset(&i2c_data, 0, sizeof(i2c_data));
-
-		ret = of_address_to_resource(np, 0, &r[0]);
-		if (ret)
-			goto err;
-
-		of_irq_to_resource(np, 0, &r[1]);
-
-		i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2);
-		if (IS_ERR(i2c_dev)) {
-			ret = PTR_ERR(i2c_dev);
-			goto err;
-		}
-
-		i2c_data.device_flags = 0;
-		flags = of_get_property(np, "dfsrr", NULL);
-		if (flags)
-			i2c_data.device_flags |= FSL_I2C_DEV_SEPARATE_DFSRR;
-
-		flags = of_get_property(np, "fsl5200-clocking", NULL);
-		if (flags)
-			i2c_data.device_flags |= FSL_I2C_DEV_CLOCK_5200;
-
-		ret =
-		    platform_device_add_data(i2c_dev, &i2c_data,
-					     sizeof(struct
-						    fsl_i2c_platform_data));
-		if (ret)
-			goto unreg;
-
-		of_register_i2c_devices(np, i++);
-	}
-
-	return 0;
-
-unreg:
-	platform_device_unregister(i2c_dev);
-err:
-	return ret;
-}
-
-arch_initcall(fsl_i2c_of_init);
-#endif
 
 #ifdef CONFIG_PPC_83xx
 static int __init mpc83xx_wdt_init(void)
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 52c831fa1886..024299887352 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -10,6 +10,7 @@ extern u32 get_baudrate(void);
 extern u32 fsl_get_sys_freq(void);
 
 struct spi_board_info;
+struct device_node;
 
 extern int fsl_spi_init(struct spi_board_info *board_infos,
 			unsigned int num_board_infos,
diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c
index 216c0f5680d2..a96584ab33dd 100644
--- a/arch/powerpc/sysdev/i8259.c
+++ b/arch/powerpc/sysdev/i8259.c
@@ -276,7 +276,7 @@ void i8259_init(struct device_node *node, unsigned long intack_addr)
 	spin_unlock_irqrestore(&i8259_lock, flags);
 
 	/* create a legacy host */
-	i8259_host = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LEGACY,
+	i8259_host = irq_alloc_host(node, IRQ_HOST_MAP_LEGACY,
 				    0, &i8259_host_ops, 0);
 	if (i8259_host == NULL) {
 		printk(KERN_ERR "i8259: failed to allocate irq host !\n");
diff --git a/arch/powerpc/sysdev/indirect_pci.c b/arch/powerpc/sysdev/indirect_pci.c
index cfbd2aae93e8..7fd49c97501a 100644
--- a/arch/powerpc/sysdev/indirect_pci.c
+++ b/arch/powerpc/sysdev/indirect_pci.c
@@ -123,6 +123,12 @@ indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
 			(bus->number == hose->first_busno))
 		val &= 0xffffff00;
 
+	/* Workaround for PCI_28 Errata in 440EPx/GRx */
+	if ((hose->indirect_type & PPC_INDIRECT_TYPE_BROKEN_MRM) &&
+			offset == PCI_CACHE_LINE_SIZE) {
+		val = 0;
+	}
+
 	/*
 	 * Note: the caller has already checked that offset is
 	 * suitably aligned and that len is 1, 2 or 4.
diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c
index 0f2dfb0aaa6a..88a983ece5c9 100644
--- a/arch/powerpc/sysdev/ipic.c
+++ b/arch/powerpc/sysdev/ipic.c
@@ -22,6 +22,7 @@
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/spinlock.h>
+#include <linux/fsl_devices.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -725,25 +726,21 @@ struct ipic * __init ipic_init(struct device_node *node, unsigned int flags)
 	struct resource res;
 	u32 temp = 0, ret;
 
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret)
+		return NULL;
+
 	ipic = alloc_bootmem(sizeof(struct ipic));
 	if (ipic == NULL)
 		return NULL;
 
 	memset(ipic, 0, sizeof(struct ipic));
 
-	ipic->irqhost = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR,
+	ipic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				       NR_IPIC_INTS,
 				       &ipic_host_ops, 0);
-	if (ipic->irqhost == NULL) {
-		of_node_put(node);
-		return NULL;
-	}
-
-	ret = of_address_to_resource(node, 0, &res);
-	if (ret) {
-		of_node_put(node);
+	if (ipic->irqhost == NULL)
 		return NULL;
-	}
 
 	ipic->regs = ioremap(res.start, res.end - res.start + 1);
 
@@ -893,8 +890,78 @@ unsigned int ipic_get_irq(void)
 	return irq_linear_revmap(primary_ipic->irqhost, irq);
 }
 
+#ifdef CONFIG_PM
+static struct {
+	u32 sicfr;
+	u32 siprr[2];
+	u32 simsr[2];
+	u32 sicnr;
+	u32 smprr[2];
+	u32 semsr;
+	u32 secnr;
+	u32 sermr;
+	u32 sercr;
+} ipic_saved_state;
+
+static int ipic_suspend(struct sys_device *sdev, pm_message_t state)
+{
+	struct ipic *ipic = primary_ipic;
+
+	ipic_saved_state.sicfr = ipic_read(ipic->regs, IPIC_SICFR);
+	ipic_saved_state.siprr[0] = ipic_read(ipic->regs, IPIC_SIPRR_A);
+	ipic_saved_state.siprr[1] = ipic_read(ipic->regs, IPIC_SIPRR_D);
+	ipic_saved_state.simsr[0] = ipic_read(ipic->regs, IPIC_SIMSR_H);
+	ipic_saved_state.simsr[1] = ipic_read(ipic->regs, IPIC_SIMSR_L);
+	ipic_saved_state.sicnr = ipic_read(ipic->regs, IPIC_SICNR);
+	ipic_saved_state.smprr[0] = ipic_read(ipic->regs, IPIC_SMPRR_A);
+	ipic_saved_state.smprr[1] = ipic_read(ipic->regs, IPIC_SMPRR_B);
+	ipic_saved_state.semsr = ipic_read(ipic->regs, IPIC_SEMSR);
+	ipic_saved_state.secnr = ipic_read(ipic->regs, IPIC_SECNR);
+	ipic_saved_state.sermr = ipic_read(ipic->regs, IPIC_SERMR);
+	ipic_saved_state.sercr = ipic_read(ipic->regs, IPIC_SERCR);
+
+	if (fsl_deep_sleep()) {
+		/* In deep sleep, make sure there can be no
+		 * pending interrupts, as this can cause
+		 * problems on 831x.
+		 */
+		ipic_write(ipic->regs, IPIC_SIMSR_H, 0);
+		ipic_write(ipic->regs, IPIC_SIMSR_L, 0);
+		ipic_write(ipic->regs, IPIC_SEMSR, 0);
+		ipic_write(ipic->regs, IPIC_SERMR, 0);
+	}
+
+	return 0;
+}
+
+static int ipic_resume(struct sys_device *sdev)
+{
+	struct ipic *ipic = primary_ipic;
+
+	ipic_write(ipic->regs, IPIC_SICFR, ipic_saved_state.sicfr);
+	ipic_write(ipic->regs, IPIC_SIPRR_A, ipic_saved_state.siprr[0]);
+	ipic_write(ipic->regs, IPIC_SIPRR_D, ipic_saved_state.siprr[1]);
+	ipic_write(ipic->regs, IPIC_SIMSR_H, ipic_saved_state.simsr[0]);
+	ipic_write(ipic->regs, IPIC_SIMSR_L, ipic_saved_state.simsr[1]);
+	ipic_write(ipic->regs, IPIC_SICNR, ipic_saved_state.sicnr);
+	ipic_write(ipic->regs, IPIC_SMPRR_A, ipic_saved_state.smprr[0]);
+	ipic_write(ipic->regs, IPIC_SMPRR_B, ipic_saved_state.smprr[1]);
+	ipic_write(ipic->regs, IPIC_SEMSR, ipic_saved_state.semsr);
+	ipic_write(ipic->regs, IPIC_SECNR, ipic_saved_state.secnr);
+	ipic_write(ipic->regs, IPIC_SERMR, ipic_saved_state.sermr);
+	ipic_write(ipic->regs, IPIC_SERCR, ipic_saved_state.sercr);
+
+	return 0;
+}
+#else
+#define ipic_suspend NULL
+#define ipic_resume NULL
+#endif
+
 static struct sysdev_class ipic_sysclass = {
 	.name = "ipic",
+	.suspend = ipic_suspend,
+	.resume = ipic_resume,
 };
 
 static struct sys_device device_ipic = {
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 7680001676a6..8e3478c995ef 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1016,13 +1016,11 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	memset(mpic, 0, sizeof(struct mpic));
 	mpic->name = name;
 
-	mpic->irqhost = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR,
+	mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				       isu_size, &mpic_host_ops,
 				       flags & MPIC_LARGE_VECTORS ? 2048 : 256);
-	if (mpic->irqhost == NULL) {
-		of_node_put(node);
+	if (mpic->irqhost == NULL)
 		return NULL;
-	}
 
 	mpic->irqhost->host_data = mpic;
 	mpic->hc_irq = mpic_irq_chip;
@@ -1143,10 +1141,14 @@ struct mpic * __init mpic_alloc(struct device_node *node,
 	greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0));
 	mpic->num_cpus = ((greg_feature & MPIC_GREG_FEATURE_LAST_CPU_MASK)
 			  >> MPIC_GREG_FEATURE_LAST_CPU_SHIFT) + 1;
-	if (isu_size == 0)
-		mpic->num_sources =
-			((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
-			 >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
+	if (isu_size == 0) {
+		if (flags & MPIC_BROKEN_FRR_NIRQS)
+			mpic->num_sources = mpic->irq_count;
+		else
+			mpic->num_sources =
+				((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK)
+				 >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1;
+	}
 
 	/* Map the per-CPU registers */
 	for (i = 0; i < mpic->num_cpus; i++) {
@@ -1494,7 +1496,7 @@ void mpic_request_ipis(void)
 	static char *ipi_names[] = {
 		"IPI0 (call function)",
 		"IPI1 (reschedule)",
-		"IPI2 (unused)",
+		"IPI2 (call function single)",
 		"IPI3 (debugger break)",
 	};
 	BUG_ON(mpic == NULL);
diff --git a/arch/powerpc/sysdev/mpic_msi.c b/arch/powerpc/sysdev/mpic_msi.c
index d272a52ecd24..de3e5e8bc324 100644
--- a/arch/powerpc/sysdev/mpic_msi.c
+++ b/arch/powerpc/sysdev/mpic_msi.c
@@ -16,6 +16,7 @@
 #include <asm/hw_irq.h>
 #include <asm/ppc-pci.h>
 
+#include <sysdev/mpic.h>
 
 static void __mpic_msi_reserve_hwirq(struct mpic *mpic, irq_hw_number_t hwirq)
 {
diff --git a/arch/powerpc/sysdev/mpic_pasemi_msi.c b/arch/powerpc/sysdev/mpic_pasemi_msi.c
index 33cbfb22ce3e..68aff6076675 100644
--- a/arch/powerpc/sysdev/mpic_pasemi_msi.c
+++ b/arch/powerpc/sysdev/mpic_pasemi_msi.c
@@ -95,6 +95,7 @@ static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 	unsigned int virq;
 	struct msi_desc *entry;
 	struct msi_msg msg;
+	int ret;
 
 	pr_debug("pasemi_msi_setup_msi_irqs, pdev %p nvec %d type %d\n",
 		 pdev, nvec, type);
@@ -108,8 +109,9 @@ static int pasemi_msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 		 * few MSIs for someone, but restrictions will apply to how the
 		 * sources can be changed independently.
 		 */
-		hwirq = mpic_msi_alloc_hwirqs(msi_mpic, ALLOC_CHUNK);
-		if (hwirq < 0) {
+		ret = mpic_msi_alloc_hwirqs(msi_mpic, ALLOC_CHUNK);
+		hwirq = ret;
+		if (ret < 0) {
 			pr_debug("pasemi_msi: failed allocating hwirq\n");
 			return hwirq;
 		}
diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c
index 1d5a40899b74..6e2f8686fdfc 100644
--- a/arch/powerpc/sysdev/mpic_u3msi.c
+++ b/arch/powerpc/sysdev/mpic_u3msi.c
@@ -115,17 +115,19 @@ static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 	struct msi_desc *entry;
 	struct msi_msg msg;
 	u64 addr;
+	int ret;
 
 	addr = find_ht_magic_addr(pdev);
 	msg.address_lo = addr & 0xFFFFFFFF;
 	msg.address_hi = addr >> 32;
 
 	list_for_each_entry(entry, &pdev->msi_list, list) {
-		hwirq = mpic_msi_alloc_hwirqs(msi_mpic, 1);
-		if (hwirq < 0) {
+		ret = mpic_msi_alloc_hwirqs(msi_mpic, 1);
+		if (ret < 0) {
 			pr_debug("u3msi: failed allocating hwirq\n");
-			return hwirq;
+			return ret;
 		}
+		hwirq = ret;
 
 		virq = irq_create_mapping(msi_mpic->irqhost, hwirq);
 		if (virq == NO_IRQ) {
diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c
index a132e0de8ca5..32e0ad0ebea8 100644
--- a/arch/powerpc/sysdev/mv64x60_dev.c
+++ b/arch/powerpc/sysdev/mv64x60_dev.c
@@ -15,6 +15,7 @@
 #include <linux/console.h>
 #include <linux/mv643xx.h>
 #include <linux/platform_device.h>
+#include <linux/of_platform.h>
 
 #include <asm/prom.h>
 
@@ -25,6 +26,11 @@
  * PowerPC of_platform_bus_type.  They support platform_bus_type instead.
  */
 
+static struct of_device_id __initdata of_mv64x60_devices[] = {
+	{ .compatible = "marvell,mv64306-devctrl", },
+	{}
+};
+
 /*
  * Create MPSC platform devices
  */
@@ -484,6 +490,10 @@ static int __init mv64x60_device_setup(void)
 		of_node_put(np);
 	}
 
+	/* Now add every node that is on the device bus */
+	for_each_compatible_node(np, NULL, "marvell,mv64360")
+		of_platform_bus_probe(np, of_mv64x60_devices, NULL);
+
 	return 0;
 }
 arch_initcall(mv64x60_device_setup);
diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index b4a54c52e880..fb368dfde5d4 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -75,6 +75,11 @@ static void fixup_ppc4xx_pci_bridge(struct pci_dev *dev)
 	    !of_device_is_compatible(hose->dn, "ibm,plb-pci"))
 		return;
 
+	if (of_device_is_compatible(hose->dn, "ibm,plb440epx-pci") ||
+		of_device_is_compatible(hose->dn, "ibm,plb440grx-pci")) {
+		hose->indirect_type |= PPC_INDIRECT_TYPE_BROKEN_MRM;
+	}
+
 	/* Hide the PCI host BARs from the kernel as their content doesn't
 	 * fit well in the resource management
 	 */
@@ -1634,6 +1639,15 @@ static void __init ppc4xx_probe_pciex_bridge(struct device_node *np)
 	}
 	port = &ppc4xx_pciex_ports[portno];
 	port->index = portno;
+
+	/*
+	 * Check if device is enabled
+	 */
+	if (!of_device_is_available(np)) {
+		printk(KERN_INFO "PCIE%d: Port disabled via device-tree\n", port->index);
+		return;
+	}
+
 	port->node = of_node_get(np);
 	pval = of_get_property(np, "sdr-base", NULL);
 	if (pval == NULL) {
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index adc66212a419..1ce546462be5 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -20,3 +20,16 @@ config UCC
 	bool
 	default y if UCC_FAST || UCC_SLOW
 
+config QE_USB
+	bool
+	help
+	  QE USB Host Controller support
+
+config QE_GPIO
+	bool "QE GPIO support"
+	depends on QUICC_ENGINE
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Say Y here if you're going to use hardware that connects to the
+	  QE GPIOs.
diff --git a/arch/powerpc/sysdev/qe_lib/Makefile b/arch/powerpc/sysdev/qe_lib/Makefile
index 874fe1a5b1cf..f1855c185291 100644
--- a/arch/powerpc/sysdev/qe_lib/Makefile
+++ b/arch/powerpc/sysdev/qe_lib/Makefile
@@ -6,3 +6,5 @@ obj-$(CONFIG_QUICC_ENGINE)+= qe.o qe_ic.o qe_io.o
 obj-$(CONFIG_UCC)	+= ucc.o
 obj-$(CONFIG_UCC_SLOW)	+= ucc_slow.o
 obj-$(CONFIG_UCC_FAST)	+= ucc_fast.o
+obj-$(CONFIG_QE_USB)	+= usb.o
+obj-$(CONFIG_QE_GPIO)	+= gpio.o
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
new file mode 100644
index 000000000000..8e5a0bc36d0b
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/gpio.c
@@ -0,0 +1,149 @@
+/*
+ * QUICC Engine GPIOs
+ *
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <asm/qe.h>
+
+struct qe_gpio_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u32 cpdata;
+};
+
+static inline struct qe_gpio_chip *
+to_qe_gpio_chip(struct of_mm_gpio_chip *mm_gc)
+{
+	return container_of(mm_gc, struct qe_gpio_chip, mm_gc);
+}
+
+static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+	struct qe_pio_regs __iomem *regs = mm_gc->regs;
+
+	qe_gc->cpdata = in_be32(&regs->cpdata);
+}
+
+static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct qe_pio_regs __iomem *regs = mm_gc->regs;
+	u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
+
+	return in_be32(&regs->cpdata) & pin_mask;
+}
+
+static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+	struct qe_pio_regs __iomem *regs = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
+
+	spin_lock_irqsave(&qe_gc->lock, flags);
+
+	if (val)
+		qe_gc->cpdata |= pin_mask;
+	else
+		qe_gc->cpdata &= ~pin_mask;
+
+	out_be32(&regs->cpdata, qe_gc->cpdata);
+
+	spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+
+static int qe_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&qe_gc->lock, flags);
+
+	__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_IN, 0, 0, 0);
+
+	spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+	return 0;
+}
+
+static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&qe_gc->lock, flags);
+
+	__par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0);
+
+	spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+	qe_gpio_set(gc, gpio, val);
+
+	return 0;
+}
+
+static int __init qe_add_gpiochips(void)
+{
+	struct device_node *np;
+
+	for_each_compatible_node(np, NULL, "fsl,mpc8323-qe-pario-bank") {
+		int ret;
+		struct qe_gpio_chip *qe_gc;
+		struct of_mm_gpio_chip *mm_gc;
+		struct of_gpio_chip *of_gc;
+		struct gpio_chip *gc;
+
+		qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL);
+		if (!qe_gc) {
+			ret = -ENOMEM;
+			goto err;
+		}
+
+		spin_lock_init(&qe_gc->lock);
+
+		mm_gc = &qe_gc->mm_gc;
+		of_gc = &mm_gc->of_gc;
+		gc = &of_gc->gc;
+
+		mm_gc->save_regs = qe_gpio_save_regs;
+		of_gc->gpio_cells = 2;
+		gc->ngpio = QE_PIO_PINS;
+		gc->direction_input = qe_gpio_dir_in;
+		gc->direction_output = qe_gpio_dir_out;
+		gc->get = qe_gpio_get;
+		gc->set = qe_gpio_set;
+
+		ret = of_mm_gpiochip_add(np, mm_gc);
+		if (ret)
+			goto err;
+		continue;
+err:
+		pr_err("%s: registration failed with status %d\n",
+		       np->full_name, ret);
+		kfree(qe_gc);
+		/* try others anyway */
+	}
+	return 0;
+}
+arch_initcall(qe_add_gpiochips);
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index cff550eec7e8..b3b73ae57d6d 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -35,7 +35,6 @@
 #include <asm/rheap.h>
 
 static void qe_snums_init(void);
-static void qe_muram_init(void);
 static int qe_sdma_init(void);
 
 static DEFINE_SPINLOCK(qe_lock);
@@ -65,7 +64,7 @@ static phys_addr_t qebase = -1;
 phys_addr_t get_qe_base(void)
 {
 	struct device_node *qe;
-	unsigned int size;
+	int size;
 	const u32 *prop;
 
 	if (qebase != -1)
@@ -88,7 +87,7 @@ phys_addr_t get_qe_base(void)
 
 EXPORT_SYMBOL(get_qe_base);
 
-void qe_reset(void)
+void __init qe_reset(void)
 {
 	if (qe_immr == NULL)
 		qe_immr = ioremap(get_qe_base(), QE_IMMAP_SIZE);
@@ -159,7 +158,7 @@ static unsigned int brg_clk = 0;
 unsigned int qe_get_brg_clk(void)
 {
 	struct device_node *qe;
-	unsigned int size;
+	int size;
 	const u32 *prop;
 
 	if (brg_clk)
@@ -306,7 +305,7 @@ EXPORT_SYMBOL(qe_put_snum);
 
 static int qe_sdma_init(void)
 {
-	struct sdma *sdma = &qe_immr->sdma;
+	struct sdma __iomem *sdma = &qe_immr->sdma;
 	unsigned long sdma_buf_offset;
 
 	if (!sdma)
@@ -325,97 +324,6 @@ static int qe_sdma_init(void)
 	return 0;
 }
 
-/*
- * muram_alloc / muram_free bits.
- */
-static DEFINE_SPINLOCK(qe_muram_lock);
-
-/* 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up... */
-static rh_block_t qe_boot_muram_rh_block[16];
-static rh_info_t qe_muram_info;
-
-static void qe_muram_init(void)
-{
-	struct device_node *np;
-	const u32 *address;
-	u64 size;
-	unsigned int flags;
-
-	/* initialize the info header */
-	rh_init(&qe_muram_info, 1,
-		sizeof(qe_boot_muram_rh_block) /
-		sizeof(qe_boot_muram_rh_block[0]), qe_boot_muram_rh_block);
-
-	/* Attach the usable muram area */
-	/* XXX: This is a subset of the available muram. It
-	 * varies with the processor and the microcode patches activated.
-	 */
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe-muram-data");
-	if (!np) {
-		np = of_find_node_by_name(NULL, "data-only");
-		if (!np) {
-			WARN_ON(1);
-			return;
-		}
-	}
-
-	address = of_get_address(np, 0, &size, &flags);
-	WARN_ON(!address);
-
-	of_node_put(np);
-	if (address)
-		rh_attach_region(&qe_muram_info, *address, (int)size);
-}
-
-/* This function returns an index into the MURAM area.
- */
-unsigned long qe_muram_alloc(int size, int align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_muram_lock, flags);
-	start = rh_alloc_align(&qe_muram_info, size, align, "QE");
-	spin_unlock_irqrestore(&qe_muram_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(qe_muram_alloc);
-
-int qe_muram_free(unsigned long offset)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_muram_lock, flags);
-	ret = rh_free(&qe_muram_info, offset);
-	spin_unlock_irqrestore(&qe_muram_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(qe_muram_free);
-
-/* not sure if this is ever needed */
-unsigned long qe_muram_alloc_fixed(unsigned long offset, int size)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&qe_muram_lock, flags);
-	start = rh_alloc_fixed(&qe_muram_info, offset, size, "commproc");
-	spin_unlock_irqrestore(&qe_muram_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(qe_muram_alloc_fixed);
-
-void qe_muram_dump(void)
-{
-	rh_dump(&qe_muram_info);
-}
-EXPORT_SYMBOL(qe_muram_dump);
-
 /* The maximum number of RISCs we support */
 #define MAX_QE_RISC     2
 
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index f59444d3be75..63cdf9887f36 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -329,21 +329,19 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags,
 	struct resource res;
 	u32 temp = 0, ret, high_active = 0;
 
+	ret = of_address_to_resource(node, 0, &res);
+	if (ret)
+		return;
+
 	qe_ic = alloc_bootmem(sizeof(struct qe_ic));
 	if (qe_ic == NULL)
 		return;
 
 	memset(qe_ic, 0, sizeof(struct qe_ic));
 
-	qe_ic->irqhost = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR,
+	qe_ic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 					NR_QE_IC_INTS, &qe_ic_host_ops, 0);
-	if (qe_ic->irqhost == NULL) {
-		of_node_put(node);
-		return;
-	}
-
-	ret = of_address_to_resource(node, 0, &res);
-	if (ret)
+	if (qe_ic->irqhost == NULL)
 		return;
 
 	qe_ic->regs = ioremap(res.start, res.end - res.start + 1);
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
index 93916a48afec..7c87460179ef 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -28,21 +28,7 @@
 
 #undef DEBUG
 
-#define NUM_OF_PINS	32
-
-struct port_regs {
-	__be32	cpodr;		/* Open drain register */
-	__be32	cpdata;		/* Data register */
-	__be32	cpdir1;		/* Direction register */
-	__be32	cpdir2;		/* Direction register */
-	__be32	cppar1;		/* Pin assignment register */
-	__be32	cppar2;		/* Pin assignment register */
-#ifdef CONFIG_PPC_85xx
-	u8	pad[8];
-#endif
-};
-
-static struct port_regs __iomem *par_io;
+static struct qe_pio_regs __iomem *par_io;
 static int num_par_io_ports = 0;
 
 int par_io_init(struct device_node *np)
@@ -64,69 +50,79 @@ int par_io_init(struct device_node *np)
 	return 0;
 }
 
-int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
-		      int assignment, int has_irq)
+void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir,
+			 int open_drain, int assignment, int has_irq)
 {
-	u32 pin_mask1bit, pin_mask2bits, new_mask2bits, tmp_val;
-
-	if (!par_io)
-		return -1;
+	u32 pin_mask1bit;
+	u32 pin_mask2bits;
+	u32 new_mask2bits;
+	u32 tmp_val;
 
 	/* calculate pin location for single and 2 bits information */
-	pin_mask1bit = (u32) (1 << (NUM_OF_PINS - (pin + 1)));
+	pin_mask1bit = (u32) (1 << (QE_PIO_PINS - (pin + 1)));
 
 	/* Set open drain, if required */
-	tmp_val = in_be32(&par_io[port].cpodr);
+	tmp_val = in_be32(&par_io->cpodr);
 	if (open_drain)
-		out_be32(&par_io[port].cpodr, pin_mask1bit | tmp_val);
+		out_be32(&par_io->cpodr, pin_mask1bit | tmp_val);
 	else
-		out_be32(&par_io[port].cpodr, ~pin_mask1bit & tmp_val);
+		out_be32(&par_io->cpodr, ~pin_mask1bit & tmp_val);
 
 	/* define direction */
-	tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
-		in_be32(&par_io[port].cpdir2) :
-		in_be32(&par_io[port].cpdir1);
+	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
+		in_be32(&par_io->cpdir2) :
+		in_be32(&par_io->cpdir1);
 
 	/* get all bits mask for 2 bit per port */
-	pin_mask2bits = (u32) (0x3 << (NUM_OF_PINS -
-				(pin % (NUM_OF_PINS / 2) + 1) * 2));
+	pin_mask2bits = (u32) (0x3 << (QE_PIO_PINS -
+				(pin % (QE_PIO_PINS / 2) + 1) * 2));
 
 	/* Get the final mask we need for the right definition */
-	new_mask2bits = (u32) (dir << (NUM_OF_PINS -
-				(pin % (NUM_OF_PINS / 2) + 1) * 2));
+	new_mask2bits = (u32) (dir << (QE_PIO_PINS -
+				(pin % (QE_PIO_PINS / 2) + 1) * 2));
 
 	/* clear and set 2 bits mask */
-	if (pin > (NUM_OF_PINS / 2) - 1) {
-		out_be32(&par_io[port].cpdir2,
+	if (pin > (QE_PIO_PINS / 2) - 1) {
+		out_be32(&par_io->cpdir2,
 			 ~pin_mask2bits & tmp_val);
 		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io[port].cpdir2, new_mask2bits | tmp_val);
+		out_be32(&par_io->cpdir2, new_mask2bits | tmp_val);
 	} else {
-		out_be32(&par_io[port].cpdir1,
+		out_be32(&par_io->cpdir1,
 			 ~pin_mask2bits & tmp_val);
 		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io[port].cpdir1, new_mask2bits | tmp_val);
+		out_be32(&par_io->cpdir1, new_mask2bits | tmp_val);
 	}
 	/* define pin assignment */
-	tmp_val = (pin > (NUM_OF_PINS / 2) - 1) ?
-		in_be32(&par_io[port].cppar2) :
-		in_be32(&par_io[port].cppar1);
+	tmp_val = (pin > (QE_PIO_PINS / 2) - 1) ?
+		in_be32(&par_io->cppar2) :
+		in_be32(&par_io->cppar1);
 
-	new_mask2bits = (u32) (assignment << (NUM_OF_PINS -
-			(pin % (NUM_OF_PINS / 2) + 1) * 2));
+	new_mask2bits = (u32) (assignment << (QE_PIO_PINS -
+			(pin % (QE_PIO_PINS / 2) + 1) * 2));
 	/* clear and set 2 bits mask */
-	if (pin > (NUM_OF_PINS / 2) - 1) {
-		out_be32(&par_io[port].cppar2,
+	if (pin > (QE_PIO_PINS / 2) - 1) {
+		out_be32(&par_io->cppar2,
 			 ~pin_mask2bits & tmp_val);
 		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io[port].cppar2, new_mask2bits | tmp_val);
+		out_be32(&par_io->cppar2, new_mask2bits | tmp_val);
 	} else {
-		out_be32(&par_io[port].cppar1,
+		out_be32(&par_io->cppar1,
 			 ~pin_mask2bits & tmp_val);
 		tmp_val &= ~pin_mask2bits;
-		out_be32(&par_io[port].cppar1, new_mask2bits | tmp_val);
+		out_be32(&par_io->cppar1, new_mask2bits | tmp_val);
 	}
+}
+EXPORT_SYMBOL(__par_io_config_pin);
+
+int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain,
+		      int assignment, int has_irq)
+{
+	if (!par_io || port >= num_par_io_ports)
+		return -EINVAL;
 
+	__par_io_config_pin(&par_io[port], pin, dir, open_drain, assignment,
+			    has_irq);
 	return 0;
 }
 EXPORT_SYMBOL(par_io_config_pin);
@@ -137,10 +133,10 @@ int par_io_data_set(u8 port, u8 pin, u8 val)
 
 	if (port >= num_par_io_ports)
 		return -EINVAL;
-	if (pin >= NUM_OF_PINS)
+	if (pin >= QE_PIO_PINS)
 		return -EINVAL;
 	/* calculate pin location */
-	pin_mask = (u32) (1 << (NUM_OF_PINS - 1 - pin));
+	pin_mask = (u32) (1 << (QE_PIO_PINS - 1 - pin));
 
 	tmp_val = in_be32(&par_io[port].cpdata);
 
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
index 0e348d9af8a6..1d78071aad7d 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -26,7 +26,8 @@
 #include <asm/qe.h>
 #include <asm/ucc.h>
 
-static DEFINE_SPINLOCK(ucc_lock);
+DEFINE_SPINLOCK(cmxgcr_lock);
+EXPORT_SYMBOL(cmxgcr_lock);
 
 int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
 {
@@ -35,10 +36,10 @@ int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
 	if (ucc_num > UCC_MAX_NUM - 1)
 		return -EINVAL;
 
-	spin_lock_irqsave(&ucc_lock, flags);
+	spin_lock_irqsave(&cmxgcr_lock, flags);
 	clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
 		ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
-	spin_unlock_irqrestore(&ucc_lock, flags);
+	spin_unlock_irqrestore(&cmxgcr_lock, flags);
 
 	return 0;
 }
@@ -87,7 +88,7 @@ int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
 	return 0;
 }
 
-static void get_cmxucr_reg(unsigned int ucc_num, __be32 **cmxucr,
+static void get_cmxucr_reg(unsigned int ucc_num, __be32 __iomem **cmxucr,
 	unsigned int *reg_num, unsigned int *shift)
 {
 	unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3);
@@ -99,7 +100,7 @@ static void get_cmxucr_reg(unsigned int ucc_num, __be32 **cmxucr,
 
 int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
 {
-	__be32 *cmxucr;
+	__be32 __iomem *cmxucr;
 	unsigned int reg_num;
 	unsigned int shift;
 
@@ -120,7 +121,7 @@ int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
 int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
 	enum comm_dir mode)
 {
-	__be32 *cmxucr;
+	__be32 __iomem *cmxucr;
 	unsigned int reg_num;
 	unsigned int shift;
 	u32 clock_bits = 0;
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index bcf88e6ce962..1aecb075a72e 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -46,7 +46,7 @@ void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
 	printk(KERN_INFO "uccm  : addr=0x%p, val=0x%08x\n",
 		  &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
 	printk(KERN_INFO "uccs  : addr=0x%p, val=0x%02x\n",
-		  &uccf->uf_regs->uccs, uccf->uf_regs->uccs);
+		  &uccf->uf_regs->uccs, in_8(&uccf->uf_regs->uccs));
 	printk(KERN_INFO "urfb  : addr=0x%p, val=0x%08x\n",
 		  &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
 	printk(KERN_INFO "urfs  : addr=0x%p, val=0x%04x\n",
@@ -68,7 +68,7 @@ void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
 	printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
 		  &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
 	printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
-		  &uccf->uf_regs->guemr, uccf->uf_regs->guemr);
+		  &uccf->uf_regs->guemr, in_8(&uccf->uf_regs->guemr));
 }
 EXPORT_SYMBOL(ucc_fast_dump_regs);
 
@@ -96,7 +96,7 @@ EXPORT_SYMBOL(ucc_fast_transmit_on_demand);
 
 void ucc_fast_enable(struct ucc_fast_private * uccf, enum comm_dir mode)
 {
-	struct ucc_fast *uf_regs;
+	struct ucc_fast __iomem *uf_regs;
 	u32 gumr;
 
 	uf_regs = uccf->uf_regs;
@@ -117,7 +117,7 @@ EXPORT_SYMBOL(ucc_fast_enable);
 
 void ucc_fast_disable(struct ucc_fast_private * uccf, enum comm_dir mode)
 {
-	struct ucc_fast *uf_regs;
+	struct ucc_fast __iomem *uf_regs;
 	u32 gumr;
 
 	uf_regs = uccf->uf_regs;
@@ -139,7 +139,7 @@ EXPORT_SYMBOL(ucc_fast_disable);
 int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** uccf_ret)
 {
 	struct ucc_fast_private *uccf;
-	struct ucc_fast *uf_regs;
+	struct ucc_fast __iomem *uf_regs;
 	u32 gumr;
 	int ret;
 
@@ -216,10 +216,10 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
 	uccf->stopped_tx = 0;
 	uccf->stopped_rx = 0;
 	uf_regs = uccf->uf_regs;
-	uccf->p_ucce = (u32 *) & (uf_regs->ucce);
-	uccf->p_uccm = (u32 *) & (uf_regs->uccm);
+	uccf->p_ucce = &uf_regs->ucce;
+	uccf->p_uccm = &uf_regs->uccm;
 #ifdef CONFIG_UGETH_TX_ON_DEMAND
-	uccf->p_utodr = (u16 *) & (uf_regs->utodr);
+	uccf->p_utodr = &uf_regs->utodr;
 #endif
 #ifdef STATISTICS
 	uccf->tx_frames = 0;
diff --git a/arch/powerpc/sysdev/qe_lib/usb.c b/arch/powerpc/sysdev/qe_lib/usb.c
new file mode 100644
index 000000000000..8105462078eb
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/usb.c
@@ -0,0 +1,55 @@
+/*
+ * QE USB routines
+ *
+ * Copyright (c) Freescale Semicondutor, Inc. 2006.
+ *               Shlomi Gridish <gridish@freescale.com>
+ *               Jerry Huang <Chang-Ming.Huang@freescale.com>
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *               Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+
+int qe_usb_clock_set(enum qe_clock clk, int rate)
+{
+	struct qe_mux __iomem *mux = &qe_immr->qmx;
+	unsigned long flags;
+	u32 val;
+
+	switch (clk) {
+	case QE_CLK3:  val = QE_CMXGCR_USBCS_CLK3;  break;
+	case QE_CLK5:  val = QE_CMXGCR_USBCS_CLK5;  break;
+	case QE_CLK7:  val = QE_CMXGCR_USBCS_CLK7;  break;
+	case QE_CLK9:  val = QE_CMXGCR_USBCS_CLK9;  break;
+	case QE_CLK13: val = QE_CMXGCR_USBCS_CLK13; break;
+	case QE_CLK17: val = QE_CMXGCR_USBCS_CLK17; break;
+	case QE_CLK19: val = QE_CMXGCR_USBCS_CLK19; break;
+	case QE_CLK21: val = QE_CMXGCR_USBCS_CLK21; break;
+	case QE_BRG9:  val = QE_CMXGCR_USBCS_BRG9;  break;
+	case QE_BRG10: val = QE_CMXGCR_USBCS_BRG10; break;
+	default:
+		pr_err("%s: requested unknown clock %d\n", __func__, clk);
+		return -EINVAL;
+	}
+
+	if (qe_clock_is_brg(clk))
+		qe_setbrg(clk, rate, 1);
+
+	spin_lock_irqsave(&cmxgcr_lock, flags);
+
+	clrsetbits_be32(&mux->cmxgcr, QE_CMXGCR_USBCS, val);
+
+	spin_unlock_irqrestore(&cmxgcr_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(qe_usb_clock_set);
diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c
index c09ddc0dbeb3..c1879ebfd4f4 100644
--- a/arch/powerpc/sysdev/rtc_cmos_setup.c
+++ b/arch/powerpc/sysdev/rtc_cmos_setup.c
@@ -21,6 +21,7 @@ static int  __init add_rtc(void)
 	struct device_node *np;
 	struct platform_device *pd;
 	struct resource res[2];
+	unsigned int num_res = 1;
 	int ret;
 
 	memset(&res, 0, sizeof(res));
@@ -41,14 +42,24 @@ static int  __init add_rtc(void)
 	if (res[0].start != RTC_PORT(0))
 		return -EINVAL;
 
-	/* Use a fixed interrupt value of 8 since on PPC if we are using this
-	 * its off an i8259 which we ensure has interrupt numbers 0..15. */
-	res[1].start = 8;
-	res[1].end = 8;
-	res[1].flags = IORESOURCE_IRQ;
+	np = of_find_compatible_node(NULL, NULL, "chrp,iic");
+	if (!np)
+		np = of_find_compatible_node(NULL, NULL, "pnpPNP,000");
+	if (np) {
+		of_node_put(np);
+		/*
+		 * Use a fixed interrupt value of 8 since on PPC if we are
+		 * using this its off an i8259 which we ensure has interrupt
+		 * numbers 0..15.
+		 */
+		res[1].start = 8;
+		res[1].end = 8;
+		res[1].flags = IORESOURCE_IRQ;
+		num_res++;
+	}
 
 	pd = platform_device_register_simple("rtc_cmos", -1,
-					     &res[0], 2);
+					     &res[0], num_res);
 
 	if (IS_ERR(pd))
 		return PTR_ERR(pd);
diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c
index ac1a72dc21e5..24e1f5a197ae 100644
--- a/arch/powerpc/sysdev/tsi108_pci.c
+++ b/arch/powerpc/sysdev/tsi108_pci.c
@@ -426,11 +426,10 @@ void __init tsi108_pci_int_init(struct device_node *node)
 {
 	DBG("Tsi108_pci_int_init: initializing PCI interrupts\n");
 
-	pci_irq_host = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LEGACY,
+	pci_irq_host = irq_alloc_host(node, IRQ_HOST_MAP_LEGACY,
 				      0, &pci_irq_host_ops, 0);
 	if (pci_irq_host == NULL) {
 		printk(KERN_ERR "pci_irq_host: failed to allocate irq host !\n");
-		of_node_put(node);
 		return;
 	}
 
diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c
index 625b275c3795..d35405c59434 100644
--- a/arch/powerpc/sysdev/uic.c
+++ b/arch/powerpc/sysdev/uic.c
@@ -280,12 +280,10 @@ static struct uic * __init uic_init_one(struct device_node *node)
 	}
 	uic->dcrbase = *dcrreg;
 
-	uic->irqhost = irq_alloc_host(of_node_get(node), IRQ_HOST_MAP_LINEAR,
+	uic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
 				      NR_UIC_INTS, &uic_host_ops, -1);
-	if (! uic->irqhost) {
-		of_node_put(node);
+	if (! uic->irqhost)
 		return NULL; /* FIXME: panic? */
-	}
 
 	uic->irqhost->host_data = uic;
 
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index bfcf70ee8959..34c3d0688fe0 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -54,7 +54,7 @@
 #define skipbl	xmon_skipbl
 
 #ifdef CONFIG_SMP
-cpumask_t cpus_in_xmon = CPU_MASK_NONE;
+static cpumask_t cpus_in_xmon = CPU_MASK_NONE;
 static unsigned long xmon_taken = 1;
 static int xmon_owner;
 static int xmon_gate;
@@ -154,7 +154,7 @@ static int do_spu_cmd(void);
 static void dump_tlb_44x(void);
 #endif
 
-int xmon_no_auto_backtrace;
+static int xmon_no_auto_backtrace;
 
 extern void xmon_enter(void);
 extern void xmon_leave(void);
@@ -327,6 +327,11 @@ static void release_output_lock(void)
 {
 	xmon_speaker = 0;
 }
+
+int cpus_are_in_xmon(void)
+{
+	return !cpus_empty(cpus_in_xmon);
+}
 #endif
 
 static int xmon_core(struct pt_regs *regs, int fromipi)
@@ -593,7 +598,7 @@ static int xmon_iabr_match(struct pt_regs *regs)
 {
 	if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) != (MSR_IR|MSR_SF))
 		return 0;
-	if (iabr == 0)
+	if (iabr == NULL)
 		return 0;
 	xmon_core(regs, 0);
 	return 1;
@@ -1142,7 +1147,7 @@ bpt_cmds(void)
 		} else {
 			/* assume a breakpoint address */
 			bp = at_breakpoint(a);
-			if (bp == 0) {
+			if (bp == NULL) {
 				printf("No breakpoint at %x\n", a);
 				break;
 			}
@@ -1370,7 +1375,7 @@ static void print_bug_trap(struct pt_regs *regs)
 #endif
 }
 
-void excprint(struct pt_regs *fp)
+static void excprint(struct pt_regs *fp)
 {
 	unsigned long trap;
 
@@ -1408,7 +1413,7 @@ void excprint(struct pt_regs *fp)
 		print_bug_trap(fp);
 }
 
-void prregs(struct pt_regs *fp)
+static void prregs(struct pt_regs *fp)
 {
 	int n, trap;
 	unsigned long base;
@@ -1463,7 +1468,7 @@ void prregs(struct pt_regs *fp)
 		printf("dar = "REG"   dsisr = %.8lx\n", fp->dar, fp->dsisr);
 }
 
-void cacheflush(void)
+static void cacheflush(void)
 {
 	int cmd;
 	unsigned long nflush;
@@ -1495,7 +1500,7 @@ void cacheflush(void)
 	catch_memory_errors = 0;
 }
 
-unsigned long
+static unsigned long
 read_spr(int n)
 {
 	unsigned int instrs[2];
@@ -1533,7 +1538,7 @@ read_spr(int n)
 	return ret;
 }
 
-void
+static void
 write_spr(int n, unsigned long val)
 {
 	unsigned int instrs[2];
@@ -1571,7 +1576,7 @@ static unsigned long regno;
 extern char exc_prolog;
 extern char dec_exc;
 
-void super_regs(void)
+static void super_regs(void)
 {
 	int cmd;
 	unsigned long val;
@@ -1629,7 +1634,7 @@ void super_regs(void)
 /*
  * Stuff for reading and writing memory safely
  */
-int
+static int
 mread(unsigned long adrs, void *buf, int size)
 {
 	volatile int n;
@@ -1666,7 +1671,7 @@ mread(unsigned long adrs, void *buf, int size)
 	return n;
 }
 
-int
+static int
 mwrite(unsigned long adrs, void *buf, int size)
 {
 	volatile int n;
@@ -1731,7 +1736,7 @@ static int handle_fault(struct pt_regs *regs)
 
 #define SWAP(a, b, t)	((t) = (a), (a) = (b), (b) = (t))
 
-void
+static void
 byterev(unsigned char *val, int size)
 {
 	int t;
@@ -1793,7 +1798,7 @@ static char *memex_subcmd_help_string =
     "  x        exit this mode\n"
     "";
 
-void
+static void
 memex(void)
 {
 	int cmd, inc, i, nslash;
@@ -1944,7 +1949,7 @@ memex(void)
 	}
 }
 
-int
+static int
 bsesc(void)
 {
 	int c;
@@ -1984,7 +1989,7 @@ static void xmon_rawdump (unsigned long adrs, long ndump)
 #define isxdigit(c)	(('0' <= (c) && (c) <= '9') \
 			 || ('a' <= (c) && (c) <= 'f') \
 			 || ('A' <= (c) && (c) <= 'F'))
-void
+static void
 dump(void)
 {
 	int c;
@@ -2022,7 +2027,7 @@ dump(void)
 	}
 }
 
-void
+static void
 prdump(unsigned long adrs, long ndump)
 {
 	long n, m, c, r, nr;
@@ -2066,7 +2071,7 @@ prdump(unsigned long adrs, long ndump)
 
 typedef int (*instruction_dump_func)(unsigned long inst, unsigned long addr);
 
-int
+static int
 generic_inst_dump(unsigned long adr, long count, int praddr,
 			instruction_dump_func dump_func)
 {
@@ -2104,7 +2109,7 @@ generic_inst_dump(unsigned long adr, long count, int praddr,
 	return adr - first_adr;
 }
 
-int
+static int
 ppc_inst_dump(unsigned long adr, long count, int praddr)
 {
 	return generic_inst_dump(adr, count, praddr, print_insn_powerpc);
@@ -2126,7 +2131,7 @@ static unsigned long mval;		/* byte value to set memory to */
 static unsigned long mcount;		/* # bytes to affect */
 static unsigned long mdiffs;		/* max # differences to print */
 
-void
+static void
 memops(int cmd)
 {
 	scanhex((void *)&mdest);
@@ -2152,7 +2157,7 @@ memops(int cmd)
 	}
 }
 
-void
+static void
 memdiffs(unsigned char *p1, unsigned char *p2, unsigned nb, unsigned maxpr)
 {
 	unsigned n, prt;
@@ -2170,7 +2175,7 @@ memdiffs(unsigned char *p1, unsigned char *p2, unsigned nb, unsigned maxpr)
 static unsigned mend;
 static unsigned mask;
 
-void
+static void
 memlocate(void)
 {
 	unsigned a, n;
@@ -2203,7 +2208,7 @@ memlocate(void)
 static unsigned long mskip = 0x1000;
 static unsigned long mlim = 0xffffffff;
 
-void
+static void
 memzcan(void)
 {
 	unsigned char v;
@@ -2230,7 +2235,7 @@ memzcan(void)
 		printf("%.8x\n", a - mskip);
 }
 
-void proccall(void)
+static void proccall(void)
 {
 	unsigned long args[8];
 	unsigned long ret;
@@ -2388,7 +2393,7 @@ scanhex(unsigned long *vp)
 	return 1;
 }
 
-void
+static void
 scannl(void)
 {
 	int c;
@@ -2399,7 +2404,7 @@ scannl(void)
 		c = inchar();
 }
 
-int hexdigit(int c)
+static int hexdigit(int c)
 {
 	if( '0' <= c && c <= '9' )
 		return c - '0';
@@ -2430,13 +2435,13 @@ getstring(char *s, int size)
 static char line[256];
 static char *lineptr;
 
-void
+static void
 flush_input(void)
 {
 	lineptr = NULL;
 }
 
-int
+static int
 inchar(void)
 {
 	if (lineptr == NULL || *lineptr == 0) {
@@ -2449,7 +2454,7 @@ inchar(void)
 	return *lineptr++;
 }
 
-void
+static void
 take_input(char *str)
 {
 	lineptr = str;
@@ -2618,7 +2623,8 @@ static void dump_tlb_44x(void)
 	}
 }
 #endif /* CONFIG_44x */
-void xmon_init(int enable)
+
+static void xmon_init(int enable)
 {
 #ifdef CONFIG_PPC_ISERIES
 	if (firmware_has_feature(FW_FEATURE_ISERIES))
diff --git a/arch/ppc/.gitignore b/arch/ppc/.gitignore
deleted file mode 100644
index 1e79a0ae4473..000000000000
--- a/arch/ppc/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/include
diff --git a/arch/ppc/4xx_io/Makefile b/arch/ppc/4xx_io/Makefile
deleted file mode 100644
index 6a8cd575f382..000000000000
--- a/arch/ppc/4xx_io/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the linux MPC4xx ppc-specific parts
-#
-
-
-obj-$(CONFIG_SERIAL_SICC)		+= serial_sicc.o
diff --git a/arch/ppc/4xx_io/serial_sicc.c b/arch/ppc/4xx_io/serial_sicc.c
deleted file mode 100644
index efa0a56e230b..000000000000
--- a/arch/ppc/4xx_io/serial_sicc.c
+++ /dev/null
@@ -1,2005 +0,0 @@
-/*
- *  Driver for IBM STB3xxx SICC serial port
- *
- *  Based on drivers/char/serial_amba.c, by ARM Ltd.
- *
- *  Copyright 2001 IBM Corp.
- *  Author: IBM China Research Lab
- *            Yudong Yang <yangyud@cn.ibm.com>
- *            Yi Ge       <geyi@cn.ibm.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- *
- * This is a driver for SICC serial port on IBM Redwood 4 evaluation board.
- * The driver support both as a console device and normal serial device and
- * is compatible with normal ttyS* devices.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/capability.h>
-#include <linux/circ_buf.h>
-#include <linux/serial.h>
-#include <linux/console.h>
-#include <linux/sysrq.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/serial.h>
-
-
-#include <linux/serialP.h>
-
-
-/* -----------------------------------------------------------------------------
- *  From STB03xxx SICC UART Specification
- * -----------------------------------------------------------------------------
- *  UART Register Offsets.
- */
-
-#define BL_SICC_LSR   0x0000000      /* line status register read/clear */
-#define BL_SICC_LSRS  0x0000001      /* set line status register read/set */
-#define BL_SICC_HSR   0x0000002      /* handshake status register r/clear */
-#define BL_SICC_HSRS  0x0000003      /* set handshake status register r/set */
-#define BL_SICC_BRDH  0x0000004      /* baudrate divisor high reg r/w */
-#define BL_SICC_BRDL  0x0000005      /* baudrate divisor low reg r/w */
-#define BL_SICC_LCR   0x0000006      /* control register r/w */
-#define BL_SICC_RCR   0x0000007      /* receiver command register r/w */
-#define BL_SICC_TxCR  0x0000008      /* transmitter command register r/w */
-#define BL_SICC_RBR   0x0000009      /* receive buffer r */
-#define BL_SICC_TBR   0x0000009      /* transmit buffer w */
-#define BL_SICC_CTL2  0x000000A      /* added for Vesta */
-#define BL_SICC_IrCR  0x000000B      /* added for Vesta IR */
-
-/* masks and definitions for serial port control register */
-
-#define _LCR_LM_MASK  0xc0            /* loop back modes */
-#define _LCR_DTR_MASK 0x20            /* data terminal ready 0-inactive */
-#define _LCR_RTS_MASK 0x10            /* request to send 0-inactive */
-#define _LCR_DB_MASK  0x08            /* data bits mask */
-#define _LCR_PE_MASK  0x04            /* parity enable */
-#define _LCR_PTY_MASK 0x02            /* parity */
-#define _LCR_SB_MASK  0x01            /* stop bit mask */
-
-#define _LCR_LM_NORM  0x00            /* normal operation */
-#define _LCR_LM_LOOP  0x40            /* internal loopback mode */
-#define _LCR_LM_ECHO  0x80            /* automatic echo mode */
-#define _LCR_LM_RES   0xc0            /* reserved */
-
-#define _LCR_DTR_ACTIVE       _LCR_DTR_MASK /* DTR is active */
-#define _LCR_RTS_ACTIVE       _LCR_RTS_MASK /* RTS is active */
-#define _LCR_DB_8_BITS        _LCR_DB_MASK  /*  8 data bits */
-#define _LCR_DB_7_BITS        0x00          /*  7 data bits */
-#define _LCR_PE_ENABLE        _LCR_PE_MASK  /* parity enabled */
-#define _LCR_PE_DISABLE       0x00          /* parity disabled */
-#define _LCR_PTY_EVEN         0x00          /* even parity */
-#define _LCR_PTY_ODD          _LCR_PTY_MASK /* odd parity */
-#define _LCR_SB_1_BIT         0x00          /* one stop bit */
-#define _LCR_SB_2_BIT         _LCR_SB_MASK  /* two stop bit */
-
-/* serial port handshake register */
-
-#define _HSR_DIS_MASK  0x80            /* DSR input inactive error mask */
-#define _HSR_CS_MASK   0x40            /* CTS input inactive error mask */
-#define _HSR_DIS_ACT   0x00            /* dsr input is active */
-#define _HSR_DIS_INACT _HSR_DIS_MASK   /* dsr input is inactive */
-#define _HSR_CS_ACT    0x00            /* cts input is active */
-#define _HSR_CS_INACT  _HSR_CS_MASK    /* cts input is active */
-
-/* serial port line status register */
-
-#define _LSR_RBR_MASK  0x80            /* receive buffer ready mask */
-#define _LSR_FE_MASK   0x40            /* framing error */
-#define _LSR_OE_MASK   0x20            /* overrun error */
-#define _LSR_PE_MASK   0x10            /* parity error */
-#define _LSR_LB_MASK   0x08            /* line break */
-#define _LSR_TBR_MASK  0x04            /* transmit buffer ready */
-#define _LSR_TSR_MASK  0x02            /* transmit shift register ready */
-
-#define _LSR_RBR_FULL  _LSR_RBR_MASK  /* receive buffer is full */
-#define _LSR_FE_ERROR  _LSR_FE_MASK   /* framing error detected */
-#define _LSR_OE_ERROR  _LSR_OE_MASK   /* overrun error detected */
-#define _LSR_PE_ERROR  _LSR_PE_MASK   /* parity error detected */
-#define _LSR_LB_BREAK  _LSR_LB_MASK   /* line break detected */
-#define _LSR_TBR_EMPTY _LSR_TBR_MASK  /* transmit buffer is ready */
-#define _LSR_TSR_EMPTY _LSR_TSR_MASK  /* transmit shift register is empty */
-#define _LSR_TX_ALL    0x06           /* all physical transmit is done */
-
-#define _LSR_RX_ERR    (_LSR_LB_BREAK | _LSR_FE_MASK | _LSR_OE_MASK | \
-			 _LSR_PE_MASK )
-
-/* serial port receiver command register */
-
-#define _RCR_ER_MASK   0x80           /* enable receiver mask */
-#define _RCR_DME_MASK  0x60           /* dma mode */
-#define _RCR_EIE_MASK  0x10           /* error interrupt enable mask */
-#define _RCR_PME_MASK  0x08           /* pause mode mask */
-
-#define _RCR_ER_ENABLE _RCR_ER_MASK   /* receiver enabled */
-#define _RCR_DME_DISABLE 0x00         /* dma disabled */
-#define _RCR_DME_RXRDY 0x20           /* dma disabled, RxRDY interrupt enabled*/
-#define _RCR_DME_ENABLE2 0x40         /* dma enabled,receiver src channel 2 */
-#define _RCR_DME_ENABLE3 0x60         /* dma enabled,receiver src channel 3 */
-#define _RCR_PME_HARD  _RCR_PME_MASK  /* RTS controlled by hardware */
-#define _RCR_PME_SOFT  0x00           /* RTS controlled by software */
-
-/* serial port transmit command register */
-
-#define _TxCR_ET_MASK   0x80           /* transmitter enable mask */
-#define _TxCR_DME_MASK  0x60           /* dma mode mask */
-#define _TxCR_TIE_MASK  0x10           /* empty interrupt enable mask */
-#define _TxCR_EIE_MASK  0x08           /* error interrupt enable mask */
-#define _TxCR_SPE_MASK  0x04           /* stop/pause mask */
-#define _TxCR_TB_MASK   0x02           /* transmit break mask */
-
-#define _TxCR_ET_ENABLE _TxCR_ET_MASK  /* transmitter enabled */
-#define _TxCR_DME_DISABLE 0x00         /* transmitter disabled, TBR intr disabled */
-#define _TxCR_DME_TBR   0x20           /* transmitter disabled, TBR intr enabled */
-#define _TxCR_DME_CHAN_2 0x40          /* dma enabled, destination chann 2 */
-#define _TxCR_DME_CHAN_3 0x60          /* dma enabled, destination chann 3 */
-
-/* serial ctl reg 2 - added for Vesta */
-
-#define _CTL2_EXTERN  0x80            /*  */
-#define _CTL2_USEFIFO 0x40            /*  */
-#define _CTL2_RESETRF 0x08            /*  */
-#define _CTL2_RESETTF 0x04            /*  */
-
-
-
-#define SERIAL_SICC_NAME    "ttySICC"
-#define SERIAL_SICC_MAJOR   150
-#define SERIAL_SICC_MINOR   1
-#define SERIAL_SICC_NR      1
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-/*
- * Things needed by tty driver
- */
-static struct tty_driver *siccnormal_driver;
-
-#if defined(CONFIG_SERIAL_SICC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
-#define SUPPORT_SYSRQ
-#endif
-
-/*
- * Things needed internally to this driver
- */
-
-/*
- * tmp_buf is used as a temporary buffer by serial_write.  We need to
- * lock it in case the copy_from_user blocks while swapping in a page,
- * and some other program tries to do a serial write at the same time.
- * Since the lock will only come under contention when the system is
- * swapping and available memory is low, it makes sense to share one
- * buffer across all the serial ports, since it significantly saves
- * memory if large numbers of serial ports are open.
- */
-static u_char *tmp_buf;
-
-#define HIGH_BITS_OFFSET    ((sizeof(long)-sizeof(int))*8)
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS        256
-#define SICC_ISR_PASS_LIMIT 256
-
-#define EVT_WRITE_WAKEUP    0
-
-struct SICC_icount {
-    __u32   cts;
-    __u32   dsr;
-    __u32   rng;
-    __u32   dcd;
-    __u32   rx;
-    __u32   tx;
-    __u32   frame;
-    __u32   overrun;
-    __u32   parity;
-    __u32   brk;
-    __u32   buf_overrun;
-};
-
-/*
- * Static information about the port
- */
-struct SICC_port {
-    unsigned int        uart_base;
-    unsigned int        uart_base_phys;
-    unsigned int        irqrx;
-    unsigned int        irqtx;
-    unsigned int        uartclk;
-    unsigned int        fifosize;
-    unsigned int        tiocm_support;
-    void (*set_mctrl)(struct SICC_port *, u_int mctrl);
-};
-
-/*
- * This is the state information which is persistent across opens
- */
-struct SICC_state {
-    struct SICC_icount  icount;
-    unsigned int        line;
-    unsigned int        close_delay;
-    unsigned int        closing_wait;
-    unsigned int        custom_divisor;
-    unsigned int        flags;
-    int         count;
-    struct SICC_info    *info;
-    spinlock_t		sicc_lock;
-};
-
-#define SICC_XMIT_SIZE 1024
-/*
- * This is the state information which is only valid when the port is open.
- */
-struct SICC_info {
-    struct SICC_port    *port;
-    struct SICC_state   *state;
-    struct tty_struct   *tty;
-    unsigned char       x_char;
-    unsigned char       old_status;
-    unsigned char       read_status_mask;
-    unsigned char       ignore_status_mask;
-    struct circ_buf     xmit;
-    unsigned int        flags;
-#ifdef SUPPORT_SYSRQ
-    unsigned long       sysrq;
-#endif
-
-    unsigned int        event;
-    unsigned int        timeout;
-    unsigned int        lcr_h;
-    unsigned int        mctrl;
-    int         blocked_open;
-
-    struct tasklet_struct   tlet;
-
-    wait_queue_head_t   open_wait;
-    wait_queue_head_t   close_wait;
-    wait_queue_head_t   delta_msr_wait;
-};
-
-#ifdef CONFIG_SERIAL_SICC_CONSOLE
-static struct console siccuart_cons;
-#endif
-static void siccuart_change_speed(struct SICC_info *info, struct termios *old_termios);
-static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout);
-
-
-
-static void powerpcMtcic_cr(unsigned long value)
-{
-    mtdcr(DCRN_CICCR, value);
-}
-
-static unsigned long powerpcMfcic_cr(void)
-{
-    return mfdcr(DCRN_CICCR);
-}
-
-static unsigned long powerpcMfclkgpcr(void)
-{
-    return mfdcr(DCRN_SCCR);
-}
-
-static void sicc_set_mctrl_null(struct SICC_port *port, u_int mctrl)
-{
-}
-
-static struct SICC_port sicc_ports[SERIAL_SICC_NR] = {
-    {
-        .uart_base = 0,
-        .uart_base_phys = SICC0_IO_BASE,
-        .irqrx =    SICC0_INTRX,
-        .irqtx =    SICC0_INTTX,
-//      .uartclk =    0,
-        .fifosize = 1,
-        .set_mctrl = sicc_set_mctrl_null,
-    }
-};
-
-static struct SICC_state sicc_state[SERIAL_SICC_NR];
-
-static void siccuart_enable_rx_interrupt(struct SICC_info *info)
-{
-    unsigned char cr;
-
-    cr = readb(info->port->uart_base+BL_SICC_RCR);
-    cr &= ~_RCR_DME_MASK;
-    cr |= _RCR_DME_RXRDY;
-    writeb(cr, info->port->uart_base+BL_SICC_RCR);
-}
-
-static void siccuart_disable_rx_interrupt(struct SICC_info *info)
-{
-    unsigned char cr;
-
-    cr = readb(info->port->uart_base+BL_SICC_RCR);
-    cr &= ~_RCR_DME_MASK;
-    cr |=  _RCR_DME_DISABLE;
-    writeb(cr, info->port->uart_base+BL_SICC_RCR);
-}
-
-
-static void siccuart_enable_tx_interrupt(struct SICC_info *info)
-{
-    unsigned char cr;
-
-    cr = readb(info->port->uart_base+BL_SICC_TxCR);
-    cr &= ~_TxCR_DME_MASK;
-    cr |= _TxCR_DME_TBR;
-    writeb(cr, info->port->uart_base+BL_SICC_TxCR);
-}
-
-static void siccuart_disable_tx_interrupt(struct SICC_info *info)
-{
-    unsigned char cr;
-
-    cr = readb(info->port->uart_base+BL_SICC_TxCR);
-    cr &= ~_TxCR_DME_MASK;
-    cr |=  _TxCR_DME_DISABLE;
-    writeb(cr, info->port->uart_base+BL_SICC_TxCR);
-}
-
-
-static void siccuart_stop(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    /* disable interrupts while stopping serial port interrupts */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    siccuart_disable_tx_interrupt(info);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-static void siccuart_start(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    /* disable interrupts while starting serial port interrupts */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    if (info->xmit.head != info->xmit.tail
-        && info->xmit.buf)
-        siccuart_enable_tx_interrupt(info);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-
-/*
- * This routine is used by the interrupt handler to schedule
- * processing in the software interrupt portion of the driver.
- */
-static void siccuart_event(struct SICC_info *info, int event)
-{
-    info->event |= 1 << event;
-    tasklet_schedule(&info->tlet);
-}
-
-static void
-siccuart_rx_chars(struct SICC_info *info)
-{
-    struct tty_struct *tty = info->tty;
-    unsigned int status, ch, rsr, flg, ignored = 0;
-    struct SICC_icount *icount = &info->state->icount;
-    struct SICC_port *port = info->port;
-
-    status = readb(port->uart_base+BL_SICC_LSR );
-    while (status & _LSR_RBR_FULL) {
-        ch = readb(port->uart_base+BL_SICC_RBR);
-
-        if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-            goto ignore_char;
-        icount->rx++;
-
-        flg = TTY_NORMAL;
-
-        /*
-         * Note that the error handling code is
-         * out of the main execution path
-         */
-        rsr = readb(port->uart_base+BL_SICC_LSR);
-        if (rsr & _LSR_RX_ERR)
-            goto handle_error;
-#ifdef SUPPORT_SYSRQ
-        if (info->sysrq) {
-            if (ch && time_before(jiffies, info->sysrq)) {
-                handle_sysrq(ch, NULL);
-                info->sysrq = 0;
-                goto ignore_char;
-            }
-            info->sysrq = 0;
-        }
-#endif
-    error_return:
-        *tty->flip.flag_buf_ptr++ = flg;
-        *tty->flip.char_buf_ptr++ = ch;
-        tty->flip.count++;
-    ignore_char:
-        status = readb(port->uart_base+BL_SICC_LSR );
-    }
-out:
-    tty_flip_buffer_push(tty);
-    return;
-
-handle_error:
-    if (rsr & _LSR_LB_BREAK) {
-        rsr &= ~(_LSR_FE_MASK | _LSR_PE_MASK);
-        icount->brk++;
-
-#ifdef SUPPORT_SYSRQ
-        if (info->state->line == siccuart_cons.index) {
-            if (!info->sysrq) {
-                info->sysrq = jiffies + HZ*5;
-                goto ignore_char;
-            }
-        }
-#endif
-    } else if (rsr & _LSR_PE_MASK)
-        icount->parity++;
-    else if (rsr & _LSR_FE_MASK)
-        icount->frame++;
-    if (rsr & _LSR_OE_MASK)
-        icount->overrun++;
-
-    if (rsr & info->ignore_status_mask) {
-        if (++ignored > 100)
-            goto out;
-        goto ignore_char;
-    }
-    rsr &= info->read_status_mask;
-
-    if (rsr & _LSR_LB_BREAK)
-        flg = TTY_BREAK;
-    else if (rsr &  _LSR_PE_MASK)
-        flg = TTY_PARITY;
-    else if (rsr &  _LSR_FE_MASK)
-        flg = TTY_FRAME;
-
-    if (rsr &  _LSR_OE_MASK) {
-        /*
-         * CHECK: does overrun affect the current character?
-         * ASSUMPTION: it does not.
-         */
-        *tty->flip.flag_buf_ptr++ = flg;
-        *tty->flip.char_buf_ptr++ = ch;
-        tty->flip.count++;
-        if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-            goto ignore_char;
-        ch = 0;
-        flg = TTY_OVERRUN;
-    }
-#ifdef SUPPORT_SYSRQ
-    info->sysrq = 0;
-#endif
-    goto error_return;
-}
-
-static void siccuart_tx_chars(struct SICC_info *info)
-{
-    struct SICC_port *port = info->port;
-    int count;
-        unsigned char status;
-
-
-    if (info->x_char) {
-        writeb(info->x_char, port->uart_base+ BL_SICC_TBR);
-        info->state->icount.tx++;
-        info->x_char = 0;
-        return;
-    }
-    if (info->xmit.head == info->xmit.tail
-        || info->tty->stopped
-        || info->tty->hw_stopped) {
-        siccuart_disable_tx_interrupt(info);
-                writeb(status&(~_LSR_RBR_MASK),port->uart_base+BL_SICC_LSR);
-        return;
-    }
-
-    count = port->fifosize;
-    do {
-        writeb(info->xmit.buf[info->xmit.tail], port->uart_base+ BL_SICC_TBR);
-        info->xmit.tail = (info->xmit.tail + 1) & (SICC_XMIT_SIZE - 1);
-        info->state->icount.tx++;
-        if (info->xmit.head == info->xmit.tail)
-            break;
-    } while (--count > 0);
-
-    if (CIRC_CNT(info->xmit.head,
-             info->xmit.tail,
-             SICC_XMIT_SIZE) < WAKEUP_CHARS)
-        siccuart_event(info, EVT_WRITE_WAKEUP);
-
-    if (info->xmit.head == info->xmit.tail) {
-        siccuart_disable_tx_interrupt(info);
-    }
-}
-
-
-static irqreturn_t siccuart_int_rx(int irq, void *dev_id)
-{
-    struct SICC_info *info = dev_id;
-    siccuart_rx_chars(info)
-    return IRQ_HANDLED;
-}
-
-
-static irqreturn_t siccuart_int_tx(int irq, void *dev_id)
-{
-    struct SICC_info *info = dev_id;
-    siccuart_tx_chars(info);
-    return IRQ_HANDLED;
-}
-
-static void siccuart_tasklet_action(unsigned long data)
-{
-    struct SICC_info *info = (struct SICC_info *)data;
-    struct tty_struct *tty;
-
-    tty = info->tty;
-    if (!tty || !test_and_clear_bit(EVT_WRITE_WAKEUP, &info->event))
-        return;
-
-    if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-        tty->ldisc.write_wakeup)
-        (tty->ldisc.write_wakeup)(tty);
-    wake_up_interruptible(&tty->write_wait);
-}
-
-static int siccuart_startup(struct SICC_info *info)
-{
-    unsigned long flags;
-    unsigned long page;
-    int retval = 0;
-
-    if (info->flags & ASYNC_INITIALIZED) {
-        return 0;
-    }
-
-    page = get_zeroed_page(GFP_KERNEL);
-    if (!page)
-        return -ENOMEM;
-
-    if (info->port->uart_base == 0)
-	info->port->uart_base = (int)ioremap(info->port->uart_base_phys, PAGE_SIZE);
-    if (info->port->uart_base == 0) {
-	free_page(page);
-	return -ENOMEM;
-    }
-
-    /* lock access to info while doing setup */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-
-    if (info->xmit.buf)
-        free_page(page);
-    else
-        info->xmit.buf = (unsigned char *) page;
-
-
-    info->mctrl = 0;
-    if (info->tty->termios->c_cflag & CBAUD)
-        info->mctrl = TIOCM_RTS | TIOCM_DTR;
-    info->port->set_mctrl(info->port, info->mctrl);
-
-    /*
-     * initialise the old status of the modem signals
-     */
-    info->old_status = 0; // UART_GET_FR(info->port) & AMBA_UARTFR_MODEM_ANY;
-
-
-    if (info->tty)
-        clear_bit(TTY_IO_ERROR, &info->tty->flags);
-    info->xmit.head = info->xmit.tail = 0;
-
-    /*
-     * Set up the tty->alt_speed kludge
-     */
-    if (info->tty) {
-        if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-            info->tty->alt_speed = 57600;
-        if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-            info->tty->alt_speed = 115200;
-        if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-            info->tty->alt_speed = 230400;
-        if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-            info->tty->alt_speed = 460800;
-    }
-
-
-    writeb( 0x00, info->port->uart_base + BL_SICC_IrCR );  // disable IrDA
-
-
-    /*
-     * and set the speed of the serial port
-     */
-    siccuart_change_speed(info, 0);
-
-    // enable rx/tx ports
-    writeb(_RCR_ER_ENABLE /*| _RCR_PME_HARD*/, info->port->uart_base + BL_SICC_RCR);
-    writeb(_TxCR_ET_ENABLE               , info->port->uart_base + BL_SICC_TxCR);
-
-    readb(info->port->uart_base + BL_SICC_RBR); // clear rx port
-
-    writeb(0xf8, info->port->uart_base + BL_SICC_LSR);   /* reset bits 0-4 of LSR */
-
-    /*
-     * Finally, enable interrupts
-     */
-
-     /*
-     * Allocate the IRQ
-     */
-        retval = request_irq(info->port->irqrx, siccuart_int_rx, 0, "SICC rx", info);
-        if (retval) {
-             if (capable(CAP_SYS_ADMIN)) {
-                   if (info->tty)
-                          set_bit(TTY_IO_ERROR, &info->tty->flags);
-                   retval = 0;
-             }
-              goto errout;
-         }
-    retval = request_irq(info->port->irqtx, siccuart_int_tx, 0, "SICC tx", info);
-    if (retval) {
-        if (capable(CAP_SYS_ADMIN)) {
-            if (info->tty)
-                set_bit(TTY_IO_ERROR, &info->tty->flags);
-            retval = 0;
-        }
-        free_irq(info->port->irqrx, info);
-        goto errout;
-    }
-
-    siccuart_enable_rx_interrupt(info);
-
-    info->flags |= ASYNC_INITIALIZED;
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    return 0;
-
-
-errout:
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    return retval;
-}
-
-/*
- * This routine will shutdown a serial port; interrupts are disabled, and
- * DTR is dropped if the hangup on close termio flag is on.
- */
-static void siccuart_shutdown(struct SICC_info *info)
-{
-    unsigned long flags;
-
-    if (!(info->flags & ASYNC_INITIALIZED))
-        return;
-
-    /* lock while shutting down port */
-    spin_lock_irqsave(&info->state->sicc_lock,flags); /* Disable interrupts */
-
-    /*
-     * clear delta_msr_wait queue to avoid mem leaks: we may free the irq
-     * here so the queue might never be woken up
-     */
-    wake_up_interruptible(&info->delta_msr_wait);
-
-    /*
-     * disable all interrupts, disable the port
-     */
-    siccuart_disable_rx_interrupt(info);
-    siccuart_disable_tx_interrupt(info);
-
-    /*
-     * Free the IRQ
-     */
-    free_irq(info->port->irqtx, info);
-    free_irq(info->port->irqrx, info);
-
-    if (info->xmit.buf) {
-        unsigned long pg = (unsigned long) info->xmit.buf;
-        info->xmit.buf = NULL;
-        free_page(pg);
-    }
-
-
-    if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
-        info->mctrl &= ~(TIOCM_DTR|TIOCM_RTS);
-    info->port->set_mctrl(info->port, info->mctrl);
-
-    /* kill off our tasklet */
-    tasklet_kill(&info->tlet);
-    if (info->tty)
-        set_bit(TTY_IO_ERROR, &info->tty->flags);
-
-    info->flags &= ~ASYNC_INITIALIZED;
-
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-
-static void siccuart_change_speed(struct SICC_info *info, struct termios *old_termios)
-{
-    unsigned int lcr_h, baud, quot, cflag, old_rcr, old_tcr, bits;
-    unsigned long flags;
-
-    if (!info->tty || !info->tty->termios)
-        return;
-
-    cflag = info->tty->termios->c_cflag;
-
-    pr_debug("siccuart_set_cflag(0x%x) called\n", cflag);
-    /* byte size and parity */
-    switch (cflag & CSIZE) {
-    case CS7: lcr_h =   _LCR_PE_DISABLE | _LCR_DB_7_BITS | _LCR_SB_1_BIT; bits = 9;  break;
-    default:  lcr_h =   _LCR_PE_DISABLE | _LCR_DB_8_BITS | _LCR_SB_1_BIT; bits = 10; break; // CS8
-    }
-    if (cflag & CSTOPB) {
-        lcr_h |= _LCR_SB_2_BIT;
-        bits ++;
-    }
-    if (cflag & PARENB) {
-        lcr_h |=  _LCR_PE_ENABLE;
-        bits++;
-        if (!(cflag & PARODD))
-            lcr_h |=  _LCR_PTY_ODD;
-        else
-            lcr_h |=  _LCR_PTY_EVEN;
-    }
-
-    do {
-        /* Determine divisor based on baud rate */
-        baud = tty_get_baud_rate(info->tty);
-        if (!baud)
-            baud = 9600;
-
-
-        {
-           // here is ppc403SetBaud(com_port, baud);
-           unsigned long divisor, clockSource, temp;
-
-           /* Ensure CICCR[7] is 0 to select Internal Baud Clock */
-           powerpcMtcic_cr((unsigned long)(powerpcMfcic_cr() & 0xFEFFFFFF));
-
-           /* Determine Internal Baud Clock Frequency */
-           /* powerpcMfclkgpcr() reads DCR 0x120 - the*/
-           /* SCCR (Serial Clock Control Register) on Vesta */
-           temp = powerpcMfclkgpcr();
-
-           if(temp & 0x00000080) {
-               clockSource = 324000000;
-           }
-           else {
-               clockSource = 216000000;
-           }
-           clockSource = clockSource/(unsigned long)((temp&0x00FC0000)>>18);
-           divisor = clockSource/(16*baud) - 1;
-           /* divisor has only 12 bits of resolution */
-           if(divisor>0x00000FFF){
-               divisor=0x00000FFF;
-           }
-
-           quot = divisor;
-        }
-
-        if (baud == 38400 &&
-            ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
-            quot = info->state->custom_divisor;
-
-        if (!quot && old_termios) {
-            info->tty->termios->c_cflag &= ~CBAUD;
-            info->tty->termios->c_cflag |= (old_termios->c_cflag & CBAUD);
-            old_termios = NULL;
-        }
-    } while (quot == 0 && old_termios);
-
-    /* As a last resort, if the quotient is zero, default to 9600 bps */
-    if (!quot)
-        quot = (info->port->uartclk / (16 * 9600)) - 1;
-
-    info->timeout = info->port->fifosize * HZ * bits / baud;
-    info->timeout += HZ/50;     /* Add .02 seconds of slop */
-
-    if (cflag & CRTSCTS)
-        info->flags |= ASYNC_CTS_FLOW;
-    else
-        info->flags &= ~ASYNC_CTS_FLOW;
-    if (cflag & CLOCAL)
-        info->flags &= ~ASYNC_CHECK_CD;
-    else
-        info->flags |= ASYNC_CHECK_CD;
-
-    /*
-     * Set up parity check flag
-     */
-#define RELEVENT_IFLAG(iflag)   ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
-    info->read_status_mask = _LSR_OE_MASK;
-    if (I_INPCK(info->tty))
-        info->read_status_mask |= _LSR_FE_MASK | _LSR_PE_MASK;
-    if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
-        info->read_status_mask |= _LSR_LB_MASK;
-
-    /*
-     * Characters to ignore
-     */
-    info->ignore_status_mask = 0;
-    if (I_IGNPAR(info->tty))
-        info->ignore_status_mask |= _LSR_FE_MASK | _LSR_PE_MASK;
-    if (I_IGNBRK(info->tty)) {
-        info->ignore_status_mask |=  _LSR_LB_MASK;
-        /*
-         * If we're ignoring parity and break indicators,
-         * ignore overruns to (for real raw support).
-         */
-        if (I_IGNPAR(info->tty))
-            info->ignore_status_mask |=  _LSR_OE_MASK;
-    }
-
-    /* disable interrupts while reading and clearing registers */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-
-    old_rcr = readb(info->port->uart_base + BL_SICC_RCR);
-    old_tcr = readb(info->port->uart_base + BL_SICC_TxCR);
-
-
-    writeb(0, info->port->uart_base + BL_SICC_RCR);
-    writeb(0, info->port->uart_base + BL_SICC_TxCR);
-
-    /*RLBtrace (&ppc403Chan0, 0x2000000c, 0, 0);*/
-
-
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-
-
-    /* Set baud rate */
-    writeb((quot & 0x00000F00)>>8, info->port->uart_base + BL_SICC_BRDH );
-    writeb( quot & 0x00000FF,      info->port->uart_base + BL_SICC_BRDL );
-
-    /* Set CTL2 reg to use external clock (ExtClk) and enable FIFOs. */
-    /* For now, do NOT use FIFOs since 403 UART did not have this    */
-    /* capability and this driver was inherited from 403UART.        */
-    writeb(_CTL2_EXTERN, info->port->uart_base + BL_SICC_CTL2);
-
-    writeb(lcr_h, info->port->uart_base + BL_SICC_LCR);
-
-    writeb(old_rcr, info->port->uart_base + BL_SICC_RCR);  // restore rcr
-    writeb(old_tcr, info->port->uart_base + BL_SICC_TxCR); // restore txcr
-
-}
-
-
-static void siccuart_put_char(struct tty_struct *tty, u_char ch)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    if (!tty || !info->xmit.buf)
-        return;
-
-    /* lock info->xmit while adding character to tx buffer */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE) != 0) {
-        info->xmit.buf[info->xmit.head] = ch;
-        info->xmit.head = (info->xmit.head + 1) & (SICC_XMIT_SIZE - 1);
-    }
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-static void siccuart_flush_chars(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    if (info->xmit.head == info->xmit.tail
-        || tty->stopped
-        || tty->hw_stopped
-        || !info->xmit.buf)
-        return;
-
-    /* disable interrupts while transmitting characters */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    siccuart_enable_tx_interrupt(info);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-static int siccuart_write(struct tty_struct *tty,
-              const u_char * buf, int count)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-    int c, ret = 0;
-
-    if (!tty || !info->xmit.buf || !tmp_buf)
-        return 0;
-
-    /* lock info->xmit while removing characters from buffer */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    while (1) {
-        c = CIRC_SPACE_TO_END(info->xmit.head,
-                      info->xmit.tail,
-                      SICC_XMIT_SIZE);
-        if (count < c)
-            c = count;
-        if (c <= 0)
-            break;
-        memcpy(info->xmit.buf + info->xmit.head, buf, c);
-        info->xmit.head = (info->xmit.head + c) &
-                  (SICC_XMIT_SIZE - 1);
-        buf += c;
-        count -= c;
-        ret += c;
-    }
-    if (info->xmit.head != info->xmit.tail
-        && !tty->stopped
-        && !tty->hw_stopped)
-        siccuart_enable_tx_interrupt(info);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    return ret;
-}
-
-static int siccuart_write_room(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-
-    return CIRC_SPACE(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE);
-}
-
-static int siccuart_chars_in_buffer(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-
-    return CIRC_CNT(info->xmit.head, info->xmit.tail, SICC_XMIT_SIZE);
-}
-
-static void siccuart_flush_buffer(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    pr_debug("siccuart_flush_buffer(%d) called\n", tty->index);
-    /* lock info->xmit while zeroing buffer counts */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    info->xmit.head = info->xmit.tail = 0;
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    wake_up_interruptible(&tty->write_wait);
-    if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
-        tty->ldisc.write_wakeup)
-        (tty->ldisc.write_wakeup)(tty);
-}
-
-/*
- * This function is used to send a high-priority XON/XOFF character to
- * the device
- */
-static void siccuart_send_xchar(struct tty_struct *tty, char ch)
-{
-    struct SICC_info *info = tty->driver_data;
-
-    info->x_char = ch;
-    if (ch)
-       siccuart_enable_tx_interrupt(info);
-}
-
-static void siccuart_throttle(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-
-    if (I_IXOFF(tty))
-        siccuart_send_xchar(tty, STOP_CHAR(tty));
-
-    if (tty->termios->c_cflag & CRTSCTS) {
-        /* disable interrupts while setting modem control lines */
-        spin_lock_irqsave(&info->state->sicc_lock,flags);
-        info->mctrl &= ~TIOCM_RTS;
-        info->port->set_mctrl(info->port, info->mctrl);
-        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    }
-}
-
-static void siccuart_unthrottle(struct tty_struct *tty)
-{
-    struct SICC_info *info = (struct SICC_info *) tty->driver_data;
-    unsigned long flags;
-
-    if (I_IXOFF(tty)) {
-        if (info->x_char)
-            info->x_char = 0;
-        else
-            siccuart_send_xchar(tty, START_CHAR(tty));
-    }
-
-    if (tty->termios->c_cflag & CRTSCTS) {
-        /* disable interrupts while setting modem control lines */
-        spin_lock_irqsave(&info->state->sicc_lock,flags);
-        info->mctrl |= TIOCM_RTS;
-        info->port->set_mctrl(info->port, info->mctrl);
-        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    }
-}
-
-static int get_serial_info(struct SICC_info *info, struct serial_struct *retinfo)
-{
-    struct SICC_state *state = info->state;
-    struct SICC_port *port = info->port;
-    struct serial_struct tmp;
-
-    memset(&tmp, 0, sizeof(tmp));
-    tmp.type       = 0;
-    tmp.line       = state->line;
-    tmp.port       = port->uart_base;
-    if (HIGH_BITS_OFFSET)
-        tmp.port_high = port->uart_base >> HIGH_BITS_OFFSET;
-    tmp.irq        = port->irqrx;
-    tmp.flags      = 0;
-    tmp.xmit_fifo_size = port->fifosize;
-    tmp.baud_base      = port->uartclk / 16;
-    tmp.close_delay    = state->close_delay;
-    tmp.closing_wait   = state->closing_wait;
-    tmp.custom_divisor = state->custom_divisor;
-
-    if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
-        return -EFAULT;
-    return 0;
-}
-
-static int set_serial_info(struct SICC_info *info,
-               struct serial_struct *newinfo)
-{
-    struct serial_struct new_serial;
-    struct SICC_state *state, old_state;
-    struct SICC_port *port;
-    unsigned long new_port;
-    unsigned int i, change_irq, change_port;
-    int retval = 0;
-
-    if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
-        return -EFAULT;
-
-    state = info->state;
-    old_state = *state;
-    port = info->port;
-
-    new_port = new_serial.port;
-    if (HIGH_BITS_OFFSET)
-        new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET;
-
-    change_irq  = new_serial.irq != port->irqrx;
-    change_port = new_port != port->uart_base;
-
-    if (!capable(CAP_SYS_ADMIN)) {
-        if (change_irq || change_port ||
-            (new_serial.baud_base != port->uartclk / 16) ||
-            (new_serial.close_delay != state->close_delay) ||
-            (new_serial.xmit_fifo_size != port->fifosize) ||
-            ((new_serial.flags & ~ASYNC_USR_MASK) !=
-             (state->flags & ~ASYNC_USR_MASK)))
-            return -EPERM;
-        state->flags = ((state->flags & ~ASYNC_USR_MASK) |
-                (new_serial.flags & ASYNC_USR_MASK));
-        info->flags = ((info->flags & ~ASYNC_USR_MASK) |
-                   (new_serial.flags & ASYNC_USR_MASK));
-        state->custom_divisor = new_serial.custom_divisor;
-        goto check_and_exit;
-    }
-
-    if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) ||
-        (new_serial.baud_base < 9600))
-        return -EINVAL;
-
-    if (new_serial.type && change_port) {
-        for (i = 0; i < SERIAL_SICC_NR; i++)
-            if ((port != sicc_ports + i) &&
-                sicc_ports[i].uart_base != new_port)
-                return -EADDRINUSE;
-    }
-
-    if ((change_port || change_irq) && (state->count > 1))
-        return -EBUSY;
-
-    /*
-     * OK, past this point, all the error checking has been done.
-     * At this point, we start making changes.....
-     */
-    port->uartclk = new_serial.baud_base * 16;
-    state->flags = ((state->flags & ~ASYNC_FLAGS) |
-            (new_serial.flags & ASYNC_FLAGS));
-    info->flags = ((state->flags & ~ASYNC_INTERNAL_FLAGS) |
-               (info->flags & ASYNC_INTERNAL_FLAGS));
-    state->custom_divisor = new_serial.custom_divisor;
-    state->close_delay = msecs_to_jiffies(10 * new_serial.close_delay);
-    state->closing_wait = msecs_to_jiffies(10 * new_serial.closing_wait);
-    info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-    port->fifosize = new_serial.xmit_fifo_size;
-
-    if (change_port || change_irq) {
-        /*
-         * We need to shutdown the serial port at the old
-         * port/irq combination.
-         */
-        siccuart_shutdown(info);
-        port->irqrx = new_serial.irq;
-        port->uart_base = new_port;
-    }
-
-check_and_exit:
-    if (!port->uart_base)
-        return 0;
-    if (info->flags & ASYNC_INITIALIZED) {
-        if ((old_state.flags & ASYNC_SPD_MASK) !=
-            (state->flags & ASYNC_SPD_MASK) ||
-            (old_state.custom_divisor != state->custom_divisor)) {
-            if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-                info->tty->alt_speed = 57600;
-            if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-                info->tty->alt_speed = 115200;
-            if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-                info->tty->alt_speed = 230400;
-            if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-                info->tty->alt_speed = 460800;
-            siccuart_change_speed(info, NULL);
-        }
-    } else
-        retval = siccuart_startup(info);
-    return retval;
-}
-
-
-/*
- * get_lsr_info - get line status register info
- */
-static int get_lsr_info(struct SICC_info *info, unsigned int *value)
-{
-    unsigned int result, status;
-    unsigned long flags;
-
-    /* disable interrupts while reading status from port */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    status = readb(info->port->uart_base +  BL_SICC_LSR);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    result = status & _LSR_TSR_EMPTY ? TIOCSER_TEMT : 0;
-
-    /*
-     * If we're about to load something into the transmit
-     * register, we'll pretend the transmitter isn't empty to
-     * avoid a race condition (depending on when the transmit
-     * interrupt happens).
-     */
-    if (info->x_char ||
-        ((CIRC_CNT(info->xmit.head, info->xmit.tail,
-               SICC_XMIT_SIZE) > 0) &&
-         !info->tty->stopped && !info->tty->hw_stopped))
-        result &= TIOCSER_TEMT;
-
-    return put_user(result, value);
-}
-
-static int get_modem_info(struct SICC_info *info, unsigned int *value)
-{
-    unsigned int result = info->mctrl;
-
-    return put_user(result, value);
-}
-
-static int set_modem_info(struct SICC_info *info, unsigned int cmd,
-              unsigned int *value)
-{
-    unsigned int arg, old;
-    unsigned long flags;
-
-    if (get_user(arg, value))
-        return -EFAULT;
-
-    old = info->mctrl;
-    switch (cmd) {
-    case TIOCMBIS:
-        info->mctrl |= arg;
-        break;
-
-    case TIOCMBIC:
-        info->mctrl &= ~arg;
-        break;
-
-    case TIOCMSET:
-        info->mctrl = arg;
-        break;
-
-    default:
-        return -EINVAL;
-    }
-    /* disable interrupts while setting modem control lines */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    if (old != info->mctrl)
-        info->port->set_mctrl(info->port, info->mctrl);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    return 0;
-}
-
-static void siccuart_break_ctl(struct tty_struct *tty, int break_state)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-    unsigned int lcr_h;
-
-
-    /* disable interrupts while setting break state */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    lcr_h = readb(info->port + BL_SICC_LSR);
-    if (break_state == -1)
-        lcr_h |=  _LSR_LB_MASK;
-    else
-        lcr_h &= ~_LSR_LB_MASK;
-    writeb(lcr_h, info->port + BL_SICC_LSRS);
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-}
-
-static int siccuart_ioctl(struct tty_struct *tty, struct file *file,
-               unsigned int cmd, unsigned long arg)
-{
-    struct SICC_info *info = tty->driver_data;
-    struct SICC_icount cnow;
-    struct serial_icounter_struct icount;
-    unsigned long flags;
-
-    if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
-        (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
-        (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
-        if (tty->flags & (1 << TTY_IO_ERROR))
-            return -EIO;
-    }
-
-    switch (cmd) {
-        case TIOCMGET:
-            return get_modem_info(info, (unsigned int *)arg);
-        case TIOCMBIS:
-        case TIOCMBIC:
-        case TIOCMSET:
-            return set_modem_info(info, cmd, (unsigned int *)arg);
-        case TIOCGSERIAL:
-            return get_serial_info(info,
-                           (struct serial_struct *)arg);
-        case TIOCSSERIAL:
-            return set_serial_info(info,
-                           (struct serial_struct *)arg);
-        case TIOCSERGETLSR: /* Get line status register */
-            return get_lsr_info(info, (unsigned int *)arg);
-        /*
-         * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
-         * - mask passed in arg for lines of interest
-         *   (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
-         * Caller should use TIOCGICOUNT to see which one it was
-         */
-        case TIOCMIWAIT:
-            return 0;
-        /*
-         * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
-         * Return: write counters to the user passed counter struct
-         * NB: both 1->0 and 0->1 transitions are counted except for
-         *     RI where only 0->1 is counted.
-         */
-        case TIOCGICOUNT:
-            /* disable interrupts while getting interrupt count */
-            spin_lock_irqsave(&info->state->sicc_lock,flags);
-            cnow = info->state->icount;
-            spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-            icount.cts = cnow.cts;
-            icount.dsr = cnow.dsr;
-            icount.rng = cnow.rng;
-            icount.dcd = cnow.dcd;
-            icount.rx  = cnow.rx;
-            icount.tx  = cnow.tx;
-            icount.frame = cnow.frame;
-            icount.overrun = cnow.overrun;
-            icount.parity = cnow.parity;
-            icount.brk = cnow.brk;
-            icount.buf_overrun = cnow.buf_overrun;
-
-            return copy_to_user((void *)arg, &icount, sizeof(icount))
-                    ? -EFAULT : 0;
-
-        default:
-            return -ENOIOCTLCMD;
-    }
-    return 0;
-}
-
-static void siccuart_set_termios(struct tty_struct *tty, struct termios *old_termios)
-{
-    struct SICC_info *info = tty->driver_data;
-    unsigned long flags;
-    unsigned int cflag = tty->termios->c_cflag;
-
-    if ((cflag ^ old_termios->c_cflag) == 0 &&
-        RELEVENT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0)
-        return;
-
-    siccuart_change_speed(info, old_termios);
-
-    /* Handle transition to B0 status */
-    if ((old_termios->c_cflag & CBAUD) &&
-        !(cflag & CBAUD)) {
-        /* disable interrupts while setting break state */
-        spin_lock_irqsave(&info->state->sicc_lock,flags);
-        info->mctrl &= ~(TIOCM_RTS | TIOCM_DTR);
-        info->port->set_mctrl(info->port, info->mctrl);
-        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    }
-
-    /* Handle transition away from B0 status */
-    if (!(old_termios->c_cflag & CBAUD) &&
-        (cflag & CBAUD)) {
-        /* disable interrupts while setting break state */
-        spin_lock_irqsave(&info->state->sicc_lock,flags);
-        info->mctrl |= TIOCM_DTR;
-        if (!(cflag & CRTSCTS) ||
-            !test_bit(TTY_THROTTLED, &tty->flags))
-            info->mctrl |= TIOCM_RTS;
-        info->port->set_mctrl(info->port, info->mctrl);
-        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    }
-
-    /* Handle turning off CRTSCTS */
-    if ((old_termios->c_cflag & CRTSCTS) &&
-        !(cflag & CRTSCTS)) {
-        tty->hw_stopped = 0;
-        siccuart_start(tty);
-    }
-
-#if 0
-    /*
-     * No need to wake up processes in open wait, since they
-     * sample the CLOCAL flag once, and don't recheck it.
-     * XXX  It's not clear whether the current behavior is correct
-     * or not.  Hence, this may change.....
-     */
-    if (!(old_termios->c_cflag & CLOCAL) &&
-        (tty->termios->c_cflag & CLOCAL))
-        wake_up_interruptible(&info->open_wait);
-#endif
-}
-
-static void siccuart_close(struct tty_struct *tty, struct file *filp)
-{
-    struct SICC_info *info = tty->driver_data;
-    struct SICC_state *state;
-    unsigned long flags;
-
-    if (!info)
-        return;
-
-    state = info->state;
-
-    //pr_debug("siccuart_close() called\n");
-
-    /* lock tty->driver_data while closing port */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-
-    if (tty_hung_up_p(filp)) {
-        goto quick_close;
-    }
-
-    if ((tty->count == 1) && (state->count != 1)) {
-        /*
-         * Uh, oh.  tty->count is 1, which means that the tty
-         * structure will be freed.  state->count should always
-         * be one in these conditions.  If it's greater than
-         * one, we've got real problems, since it means the
-         * serial port won't be shutdown.
-         */
-        printk("siccuart_close: bad serial port count; tty->count is 1, state->count is %d\n", state->count);
-        state->count = 1;
-    }
-    if (--state->count < 0) {
-        printk("rs_close: bad serial port count for %s: %d\n", tty->name, state->count);
-        state->count = 0;
-    }
-    if (state->count) {
-        goto quick_close;
-    }
-    info->flags |= ASYNC_CLOSING;
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    /*
-     * Now we wait for the transmit buffer to clear; and we notify
-     * the line discipline to only process XON/XOFF characters.
-     */
-    tty->closing = 1;
-    if (info->state->closing_wait != ASYNC_CLOSING_WAIT_NONE)
-        tty_wait_until_sent(tty, info->state->closing_wait);
-    /*
-     * At this point, we stop accepting input.  To do this, we
-     * disable the receive line status interrupts.
-     */
-    if (info->flags & ASYNC_INITIALIZED) {
-        siccuart_disable_rx_interrupt(info);
-        /*
-         * Before we drop DTR, make sure the UART transmitter
-         * has completely drained; this is especially
-         * important if there is a transmit FIFO!
-         */
-        siccuart_wait_until_sent(tty, info->timeout);
-    }
-    siccuart_shutdown(info);
-    if (tty->driver->flush_buffer)
-        tty->driver->flush_buffer(tty);
-    if (tty->ldisc.flush_buffer)
-        tty->ldisc.flush_buffer(tty);
-    tty->closing = 0;
-    info->event = 0;
-    info->tty = NULL;
-    if (info->blocked_open) {
-        if (info->state->close_delay)
-            schedule_timeout_interruptible(info->state->close_delay);
-        wake_up_interruptible(&info->open_wait);
-    }
-    info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-    wake_up_interruptible(&info->close_wait);
-    return;
-
-quick_close:
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    return;
-}
-
-static void siccuart_wait_until_sent(struct tty_struct *tty, int timeout)
-{
-    struct SICC_info *info = (struct SICC_info *) tty->driver_data;
-    unsigned long char_time, expire;
-
-    if (info->port->fifosize == 0)
-        return;
-
-    /*
-     * Set the check interval to be 1/5 of the estimated time to
-     * send a single character, and make it at least 1.  The check
-     * interval should also be less than the timeout.
-     *
-     * Note: we have to use pretty tight timings here to satisfy
-     * the NIST-PCTS.
-     */
-    char_time = (info->timeout - msecs_to_jiffies(20)) / info->port->fifosize;
-    char_time = char_time / 5;
-    if (char_time == 0)
-        char_time = 1;
-
-    // Crazy!!   sometimes the input arg 'timeout' can be negtive numbers  :-(
-    if (timeout >= 0 && timeout < char_time)
-        char_time = timeout;
-    /*
-     * If the transmitter hasn't cleared in twice the approximate
-     * amount of time to send the entire FIFO, it probably won't
-     * ever clear.  This assumes the UART isn't doing flow
-     * control, which is currently the case.  Hence, if it ever
-     * takes longer than info->timeout, this is probably due to a
-     * UART bug of some kind.  So, we clamp the timeout parameter at
-     * 2*info->timeout.
-     */
-    if (!timeout || timeout > 2 * info->timeout)
-        timeout = 2 * info->timeout;
-
-    expire = jiffies + timeout;
-    pr_debug("siccuart_wait_until_sent(%d), jiff=%lu, expire=%lu  char_time=%lu...\n",
-           tty->index, jiffies,
-           expire, char_time);
-    while ((readb(info->port->uart_base + BL_SICC_LSR) & _LSR_TX_ALL) != _LSR_TX_ALL) {
-        schedule_timeout_interruptible(char_time);
-        if (signal_pending(current))
-            break;
-        if (timeout && time_after(jiffies, expire))
-            break;
-    }
-    set_current_state(TASK_RUNNING);
-}
-
-static void siccuart_hangup(struct tty_struct *tty)
-{
-    struct SICC_info *info = tty->driver_data;
-    struct SICC_state *state = info->state;
-
-    siccuart_flush_buffer(tty);
-    if (info->flags & ASYNC_CLOSING)
-        return;
-    siccuart_shutdown(info);
-    info->event = 0;
-    state->count = 0;
-    info->flags &= ~ASYNC_NORMAL_ACTIVE;
-    info->tty = NULL;
-    wake_up_interruptible(&info->open_wait);
-}
-
-static int block_til_ready(struct tty_struct *tty, struct file *filp,
-               struct SICC_info *info)
-{
-    DECLARE_WAITQUEUE(wait, current);
-    struct SICC_state *state = info->state;
-    unsigned long flags;
-    int do_clocal = 0, extra_count = 0, retval;
-
-    /*
-     * If the device is in the middle of being closed, then block
-     * until it's done, and then try again.
-     */
-    if (tty_hung_up_p(filp) ||
-        (info->flags & ASYNC_CLOSING)) {
-        if (info->flags & ASYNC_CLOSING)
-            interruptible_sleep_on(&info->close_wait);
-        return (info->flags & ASYNC_HUP_NOTIFY) ?
-            -EAGAIN : -ERESTARTSYS;
-    }
-
-    /*
-     * If non-blocking mode is set, or the port is not enabled,
-     * then make the check up front and then exit.
-     */
-    if ((filp->f_flags & O_NONBLOCK) ||
-        (tty->flags & (1 << TTY_IO_ERROR))) {
-        info->flags |= ASYNC_NORMAL_ACTIVE;
-        return 0;
-    }
-
-    if (tty->termios->c_cflag & CLOCAL)
-	do_clocal = 1;
-
-    /*
-     * Block waiting for the carrier detect and the line to become
-     * free (i.e., not in use by the callout).  While we are in
-     * this loop, state->count is dropped by one, so that
-     * rs_close() knows when to free things.  We restore it upon
-     * exit, either normal or abnormal.
-     */
-    retval = 0;
-    add_wait_queue(&info->open_wait, &wait);
-    /* lock while decrementing state->count */
-    spin_lock_irqsave(&info->state->sicc_lock,flags);
-    if (!tty_hung_up_p(filp)) {
-        extra_count = 1;
-        state->count--;
-    }
-    spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-    info->blocked_open++;
-    while (1) {
-        /* disable interrupts while setting modem control lines */
-        spin_lock_irqsave(&info->state->sicc_lock,flags);
-        if (tty->termios->c_cflag & CBAUD) {
-            info->mctrl = TIOCM_DTR | TIOCM_RTS;
-            info->port->set_mctrl(info->port, info->mctrl);
-        }
-        spin_unlock_irqrestore(&info->state->sicc_lock,flags);
-        set_current_state(TASK_INTERRUPTIBLE);
-        if (tty_hung_up_p(filp) ||
-            !(info->flags & ASYNC_INITIALIZED)) {
-            if (info->flags & ASYNC_HUP_NOTIFY)
-                retval = -EAGAIN;
-            else
-                retval = -ERESTARTSYS;
-            break;
-        }
-        if (!(info->flags & ASYNC_CLOSING) &&
-            (do_clocal /*|| (UART_GET_FR(info->port) & SICC_UARTFR_DCD)*/))
-            break;
-        if (signal_pending(current)) {
-            retval = -ERESTARTSYS;
-            break;
-        }
-        schedule();
-    }
-    set_current_state(TASK_RUNNING);
-    remove_wait_queue(&info->open_wait, &wait);
-    if (extra_count)
-        state->count++;
-    info->blocked_open--;
-    if (retval)
-        return retval;
-    info->flags |= ASYNC_NORMAL_ACTIVE;
-    return 0;
-}
-
-static struct SICC_info *siccuart_get(int line)
-{
-    struct SICC_info *info;
-    struct SICC_state *state = sicc_state + line;
-
-    state->count++;
-    if (state->info)
-        return state->info;
-    info = kzalloc(sizeof(struct SICC_info), GFP_KERNEL);
-    if (info) {
-        init_waitqueue_head(&info->open_wait);
-        init_waitqueue_head(&info->close_wait);
-        init_waitqueue_head(&info->delta_msr_wait);
-        info->flags = state->flags;
-        info->state = state;
-        info->port  = sicc_ports + line;
-        tasklet_init(&info->tlet, siccuart_tasklet_action,
-                 (unsigned long)info);
-    }
-    if (state->info) {
-        kfree(info);
-        return state->info;
-    }
-    state->info = info;
-    return info;
-}
-
-static int siccuart_open(struct tty_struct *tty, struct file *filp)
-{
-    struct SICC_info *info;
-    int retval, line = tty->index;
-
-
-    // is this a line that we've got?
-    if (line >= SERIAL_SICC_NR) {
-        return -ENODEV;
-    }
-
-    info = siccuart_get(line);
-    if (!info)
-        return -ENOMEM;
-
-    tty->driver_data = info;
-    info->tty = tty;
-    info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
-    /*
-     * Make sure we have the temporary buffer allocated
-     */
-    if (!tmp_buf) {
-        unsigned long page = get_zeroed_page(GFP_KERNEL);
-        if (tmp_buf)
-            free_page(page);
-        else if (!page) {
-            return -ENOMEM;
-        }
-        tmp_buf = (u_char *)page;
-    }
-
-    /*
-     * If the port is in the middle of closing, bail out now.
-     */
-    if (tty_hung_up_p(filp) ||
-        (info->flags & ASYNC_CLOSING)) {
-        if (info->flags & ASYNC_CLOSING)
-            interruptible_sleep_on(&info->close_wait);
-        return -EAGAIN;
-    }
-
-    /*
-     * Start up the serial port
-     */
-    retval = siccuart_startup(info);
-    if (retval) {
-        return retval;
-    }
-
-    retval = block_til_ready(tty, filp, info);
-    if (retval) {
-        return retval;
-    }
-
-#ifdef CONFIG_SERIAL_SICC_CONSOLE
-    if (siccuart_cons.cflag && siccuart_cons.index == line) {
-        tty->termios->c_cflag = siccuart_cons.cflag;
-        siccuart_cons.cflag = 0;
-        siccuart_change_speed(info, NULL);
-    }
-#endif
-    return 0;
-}
-
-static const struct tty_operations sicc_ops = {
-	.open = siccuart_open,
-	.close = siccuart_close,
-	.write = siccuart_write,
-	.put_char = siccuart_put_char,
-	.flush_chars = siccuart_flush_chars,
-	.write_room = siccuart_write_room,
-	.chars_in_buffer = siccuart_chars_in_buffer,
-	.flush_buffer  = siccuart_flush_buffer,
-	.ioctl = siccuart_ioctl,
-	.throttle = siccuart_throttle,
-	.unthrottle = siccuart_unthrottle,
-	.send_xchar = siccuart_send_xchar,
-	.set_termios = siccuart_set_termios,
-	.stop = siccuart_stop,
-	.start = siccuart_start,
-	.hangup = siccuart_hangup,
-	.break_ctl = siccuart_break_ctl,
-	.wait_until_sent = siccuart_wait_until_sent,
-};
-
-int __init siccuart_init(void)
-{
-    int i;
-    siccnormal_driver = alloc_tty_driver(SERIAL_SICC_NR);
-    if (!siccnormal_driver)
-	return -ENOMEM;
-    printk("IBM Vesta SICC serial port driver V 0.1 by Yudong Yang and Yi Ge / IBM CRL .\n");
-    siccnormal_driver->driver_name = "serial_sicc";
-    siccnormal_driver->owner = THIS_MODULE;
-    siccnormal_driver->name = SERIAL_SICC_NAME;
-    siccnormal_driver->major = SERIAL_SICC_MAJOR;
-    siccnormal_driver->minor_start = SERIAL_SICC_MINOR;
-    siccnormal_driver->type = TTY_DRIVER_TYPE_SERIAL;
-    siccnormal_driver->subtype = SERIAL_TYPE_NORMAL;
-    siccnormal_driver->init_termios = tty_std_termios;
-    siccnormal_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-    siccnormal_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
-    tty_set_operations(siccnormal_driver, &sicc_ops);
-
-    if (tty_register_driver(siccnormal_driver))
-        panic("Couldn't register SICC serial driver\n");
-
-    for (i = 0; i < SERIAL_SICC_NR; i++) {
-        struct SICC_state *state = sicc_state + i;
-        state->line     = i;
-        state->close_delay  = msecs_to_jiffies(500);
-        state->closing_wait = 30 * HZ;
-	spin_lock_init(&state->sicc_lock);
-    }
-
-
-    return 0;
-}
-
-__initcall(siccuart_init);
-
-#ifdef CONFIG_SERIAL_SICC_CONSOLE
-/************** console driver *****************/
-
-/*
- * This code is currently never used; console->read is never called.
- * Therefore, although we have an implementation, we don't use it.
- * FIXME: the "const char *s" should be fixed to "char *s" some day.
- * (when the definition in include/linux/console.h is also fixed)
- */
-#ifdef used_and_not_const_char_pointer
-static int siccuart_console_read(struct console *co, const char *s, u_int count)
-{
-    struct SICC_port *port = &sicc_ports[co->index];
-    unsigned int status;
-    char *w;
-    int c;
-
-    pr_debug("siccuart_console_read() called\n");
-
-    c = 0;
-    w = s;
-    while (c < count) {
-        if(readb(port->uart_base +  BL_SICC_LSR) & _LSR_RBR_FULL) {
-            *w++ = readb(port->uart_base +  BL_SICC_RBR);
-            c++;
-        } else {
-            // nothing more to get, return
-            return c;
-        }
-    }
-    // return the count
-    return c;
-}
-#endif
-
-/*
- *  Print a string to the serial port trying not to disturb
- *  any possible real use of the port...
- *
- *  The console_lock must be held when we get here.
- */
-static void siccuart_console_write(struct console *co, const char *s, u_int count)
-{
-    struct SICC_port *port = &sicc_ports[co->index];
-    unsigned int old_cr;
-    int i;
-
-    /*
-     *  First save the CR then disable the interrupts
-     */
-    old_cr = readb(port->uart_base +  BL_SICC_TxCR);
-    writeb(old_cr & ~_TxCR_DME_MASK, port->uart_base +  BL_SICC_TxCR);
-
-    /*
-     *  Now, do each character
-     */
-    for (i = 0; i < count; i++) {
-        while ((readb(port->uart_base +  BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
-        writeb(s[i], port->uart_base +  BL_SICC_TBR);
-        if (s[i] == '\n') {
-            while ((readb(port->uart_base +  BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
-            writeb('\r', port->uart_base +  BL_SICC_TBR);
-        }
-    }
-
-    /*
-     *  Finally, wait for transmitter to become empty
-     *  and restore the TCR
-     */
-    while ((readb(port->uart_base +  BL_SICC_LSR)&_LSR_TX_ALL) != _LSR_TX_ALL);
-    writeb(old_cr, port->uart_base +  BL_SICC_TxCR);
-}
-
-/*
- *  Receive character from the serial port
- */
-static int siccuart_console_wait_key(struct console *co)
-{
-    struct SICC_port *port = &sicc_ports[co->index];
-    int c;
-
-    while(!(readb(port->uart_base +  BL_SICC_LSR) & _LSR_RBR_FULL));
-    c = readb(port->uart_base +  BL_SICC_RBR);
-    return c;
-}
-
-static struct tty_driver *siccuart_console_device(struct console *c, int *index)
-{
-	*index = c->index;
-	return siccnormal_driver;
-}
-
-static int __init siccuart_console_setup(struct console *co, char *options)
-{
-    struct SICC_port *port;
-    int baud = 9600;
-    int bits = 8;
-    int parity = 'n';
-    u_int cflag = CREAD | HUPCL | CLOCAL;
-    u_int lcr_h, quot;
-
-
-    if (co->index >= SERIAL_SICC_NR)
-        co->index = 0;
-
-    port = &sicc_ports[co->index];
-
-    if (port->uart_base == 0)
-	port->uart_base = (int)ioremap(port->uart_base_phys, PAGE_SIZE);
-
-    if (options) {
-        char *s = options;
-        baud = simple_strtoul(s, NULL, 10);
-        while (*s >= '0' && *s <= '9')
-            s++;
-        if (*s) parity = *s++;
-        if (*s) bits = *s - '0';
-    }
-
-    /*
-     *    Now construct a cflag setting.
-     */
-    switch (baud) {
-    case 1200:  cflag |= B1200;         break;
-    case 2400:  cflag |= B2400;         break;
-    case 4800:  cflag |= B4800;         break;
-    default:    cflag |= B9600;   baud = 9600;  break;
-    case 19200: cflag |= B19200;        break;
-    case 38400: cflag |= B38400;        break;
-    case 57600: cflag |= B57600;        break;
-    case 115200:    cflag |= B115200;       break;
-    }
-    switch (bits) {
-    case 7:   cflag |= CS7; lcr_h = _LCR_PE_DISABLE | _LCR_DB_7_BITS | _LCR_SB_1_BIT;   break;
-    default:  cflag |= CS8; lcr_h = _LCR_PE_DISABLE | _LCR_DB_8_BITS | _LCR_SB_1_BIT;   break;
-    }
-    switch (parity) {
-    case 'o':
-    case 'O': cflag |= PARODD; lcr_h |= _LCR_PTY_ODD;   break;
-    case 'e':
-    case 'E': cflag |= PARENB; lcr_h |= _LCR_PE_ENABLE |  _LCR_PTY_ODD; break;
-    }
-
-    co->cflag = cflag;
-
-
-       {
-           // a copy of is inserted here ppc403SetBaud(com_port, (int)9600);
-           unsigned long divisor, clockSource, temp;
-           unsigned int rate = baud;
-
-          /* Ensure CICCR[7] is 0 to select Internal Baud Clock */
-          powerpcMtcic_cr((unsigned long)(powerpcMfcic_cr() & 0xFEFFFFFF));
-
-          /* Determine Internal Baud Clock Frequency */
-          /* powerpcMfclkgpcr() reads DCR 0x120 - the*/
-          /* SCCR (Serial Clock Control Register) on Vesta */
-          temp = powerpcMfclkgpcr();
-
-          if(temp & 0x00000080) {
-              clockSource = 324000000;
-          }
-          else {
-              clockSource = 216000000;
-          }
-          clockSource = clockSource/(unsigned long)((temp&0x00FC0000)>>18);
-          divisor = clockSource/(16*rate) - 1;
-          /* divisor has only 12 bits of resolution */
-          if(divisor>0x00000FFF){
-               divisor=0x00000FFF;
-          }
-
-          quot = divisor;
-       }
-
-    writeb((quot & 0x00000F00)>>8, port->uart_base + BL_SICC_BRDH );
-    writeb( quot & 0x00000FF,      port->uart_base   + BL_SICC_BRDL );
-
-    /* Set CTL2 reg to use external clock (ExtClk) and enable FIFOs. */
-    /* For now, do NOT use FIFOs since 403 UART did not have this    */
-    /* capability and this driver was inherited from 403UART.        */
-    writeb(_CTL2_EXTERN, port->uart_base  + BL_SICC_CTL2);
-
-    writeb(lcr_h, port->uart_base + BL_SICC_LCR);
-    writeb(_RCR_ER_ENABLE | _RCR_PME_HARD, port->uart_base + BL_SICC_RCR);
-    writeb( _TxCR_ET_ENABLE , port->uart_base + BL_SICC_TxCR);
-
-    // writeb(, info->port->uart_base + BL_SICC_RCR );
-    /*
-     * Transmitter Command Register: Transmitter enabled & DMA + TBR interrupt
-     * + Transmitter Empty interrupt + Transmitter error interrupt disabled &
-     * Stop mode when CTS active enabled & Transmit Break + Pattern Generation
-     * mode disabled.
-     */
-
-    writeb( 0x00, port->uart_base + BL_SICC_IrCR );  // disable IrDA
-
-    readb(port->uart_base + BL_SICC_RBR);
-
-    writeb(0xf8, port->uart_base + BL_SICC_LSR);   /* reset bits 0-4 of LSR */
-
-    /* we will enable the port as we need it */
-
-    return 0;
-}
-
-static struct console siccuart_cons =
-{
-    .name =     SERIAL_SICC_NAME,
-    .write =    siccuart_console_write,
-#ifdef used_and_not_const_char_pointer
-    .read =     siccuart_console_read,
-#endif
-    .device =   siccuart_console_device,
-    .wait_key = siccuart_console_wait_key,
-    .setup =    siccuart_console_setup,
-    .flags =    CON_PRINTBUFFER,
-    .index =    -1,
-};
-
-void __init sicc_console_init(void)
-{
-    register_console(&siccuart_cons);
-}
-
-#endif /* CONFIG_SERIAL_SICC_CONSOLE */
diff --git a/arch/ppc/8260_io/Kconfig b/arch/ppc/8260_io/Kconfig
deleted file mode 100644
index ea9651e2dd6a..000000000000
--- a/arch/ppc/8260_io/Kconfig
+++ /dev/null
@@ -1,65 +0,0 @@
-#
-# CPM2 Communication options
-#
-
-menu "CPM2 Options"
-	depends on CPM2
-
-config SCC_ENET
-	bool "CPM SCC Ethernet"
-	depends on NET_ETHERNET
-
-#
-#  CONFIG_FEC_ENET is only used to get netdevices to call our init
-#    function.  Any combination of FCC1,2,3 are supported.
-#
-config FEC_ENET
-	bool "FCC Ethernet"
-	depends on NET_ETHERNET
-
-config FCC1_ENET
-	bool "Ethernet on FCC1"
-	depends on FEC_ENET
-	help
-	  Use CPM2 fast Ethernet controller 1 to drive Ethernet (default).
-
-config FCC2_ENET
-	bool "Ethernet on FCC2"
-	depends on FEC_ENET
-	help
-	  Use CPM2 fast Ethernet controller 2 to drive Ethernet.
-
-config FCC3_ENET
-	bool "Ethernet on FCC3"
-	depends on FEC_ENET
-	help
-	  Use CPM2 fast Ethernet controller 3 to drive Ethernet.
-
-config USE_MDIO
-	bool "Use MDIO for PHY configuration"
-	depends on FEC_ENET
-
-choice
-	prompt "Type of PHY"
-	depends on 8260 && USE_MDIO
-	default FCC_GENERIC_PHY
-
-config FCC_LXT970
-	bool "LXT970"
-
-config FCC_LXT971
-	bool "LXT971"
-
-config FCC_QS6612
-	bool "QS6612"
-
-config FCC_DM9131
-	bool "DM9131"
-
-config FCC_DM9161
-	bool "DM9161"
-
-config FCC_GENERIC_PHY
-	bool "Generic"
-endchoice
-endmenu
diff --git a/arch/ppc/8260_io/Makefile b/arch/ppc/8260_io/Makefile
deleted file mode 100644
index 971f292c5d48..000000000000
--- a/arch/ppc/8260_io/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile for the linux ppc-specific parts of comm processor (v2)
-#
-
-obj-$(CONFIG_FEC_ENET)	+= fcc_enet.o
-obj-$(CONFIG_SCC_ENET)	+= enet.o
diff --git a/arch/ppc/8260_io/enet.c b/arch/ppc/8260_io/enet.c
deleted file mode 100644
index ec1defea9c1e..000000000000
--- a/arch/ppc/8260_io/enet.c
+++ /dev/null
@@ -1,865 +0,0 @@
-/*
- * Ethernet driver for Motorola MPC8260.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- * Copyright (c) 2000 MontaVista Software Inc. (source@mvista.com)
- *	2.3.99 Updates
- *
- * I copied this from the 8xx CPM Ethernet driver, so follow the
- * credits back through that.
- *
- * This version of the driver is somewhat selectable for the different
- * processor/board combinations.  It works for the boards I know about
- * now, and should be easily modified to include others.  Some of the
- * configuration information is contained in <asm/cpm1.h> and the
- * remainder is here.
- *
- * Buffer descriptors are kept in the CPM dual port RAM, and the frame
- * buffers are in the host memory.
- *
- * Right now, I am very watseful with the buffers.  I allocate memory
- * pages and then divide them into 2K frame buffers.  This way I know I
- * have buffers large enough to hold one frame within one buffer descriptor.
- * Once I get this working, I will use 64 or 128 byte CPM buffers, which
- * will be much more memory efficient and will easily handle lots of
- * small packets.
- *
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/bitops.h>
-
-#include <asm/immap_cpm2.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8260.h>
-#include <asm/uaccess.h>
-#include <asm/cpm2.h>
-#include <asm/irq.h>
-
-/*
- *				Theory of Operation
- *
- * The MPC8260 CPM performs the Ethernet processing on an SCC.  It can use
- * an aribtrary number of buffers on byte boundaries, but must have at
- * least two receive buffers to prevent constant overrun conditions.
- *
- * The buffer descriptors are allocated from the CPM dual port memory
- * with the data buffers allocated from host memory, just like all other
- * serial communication protocols.  The host memory buffers are allocated
- * from the free page pool, and then divided into smaller receive and
- * transmit buffers.  The size of the buffers should be a power of two,
- * since that nicely divides the page.  This creates a ring buffer
- * structure similar to the LANCE and other controllers.
- *
- * Like the LANCE driver:
- * The driver runs as two independent, single-threaded flows of control.  One
- * is the send-packet routine, which enforces single-threaded use by the
- * cep->tx_busy flag.  The other thread is the interrupt handler, which is
- * single threaded by the hardware and other software.
- */
-
-/* The transmitter timeout
- */
-#define TX_TIMEOUT	(2*HZ)
-
-/* The number of Tx and Rx buffers.  These are allocated from the page
- * pool.  The code may assume these are power of two, so it is best
- * to keep them that size.
- * We don't need to allocate pages for the transmitter.  We just use
- * the skbuffer directly.
- */
-#define CPM_ENET_RX_PAGES	4
-#define CPM_ENET_RX_FRSIZE	2048
-#define CPM_ENET_RX_FRPPG	(PAGE_SIZE / CPM_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(CPM_ENET_RX_FRPPG * CPM_ENET_RX_PAGES)
-#define TX_RING_SIZE		8	/* Must be power of two */
-#define TX_RING_MOD_MASK	7	/*   for this to work */
-
-/* The CPM stores dest/src/type, data, and checksum for receive packets.
- */
-#define PKT_MAXBUF_SIZE		1518
-#define PKT_MINBUF_SIZE		64
-#define PKT_MAXBLR_SIZE		1520
-
-/* The CPM buffer descriptors track the ring buffers.  The rx_bd_base and
- * tx_bd_base always point to the base of the buffer descriptors.  The
- * cur_rx and cur_tx point to the currently available buffer.
- * The dirty_tx tracks the current buffer that is being sent by the
- * controller.  The cur_tx and dirty_tx are equal under both completely
- * empty and completely full conditions.  The empty/ready indicator in
- * the buffer descriptor determines the actual condition.
- */
-struct scc_enet_private {
-	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
-	struct	sk_buff* tx_skbuff[TX_RING_SIZE];
-	ushort	skb_cur;
-	ushort	skb_dirty;
-
-	/* CPM dual port RAM relative addresses.
-	*/
-	cbd_t	*rx_bd_base;		/* Address of Rx and Tx buffers. */
-	cbd_t	*tx_bd_base;
-	cbd_t	*cur_rx, *cur_tx;		/* The next free ring entry */
-	cbd_t	*dirty_tx;	/* The ring entries to be free()ed. */
-	scc_t	*sccp;
-	struct	net_device_stats stats;
-	uint	tx_full;
-	spinlock_t lock;
-};
-
-static int scc_enet_open(struct net_device *dev);
-static int scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int scc_enet_rx(struct net_device *dev);
-static irqreturn_t scc_enet_interrupt(int irq, void *dev_id);
-static int scc_enet_close(struct net_device *dev);
-static struct net_device_stats *scc_enet_get_stats(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-
-/* These will be configurable for the SCC choice.
-*/
-#define CPM_ENET_BLOCK	CPM_CR_SCC1_SBLOCK
-#define CPM_ENET_PAGE	CPM_CR_SCC1_PAGE
-#define PROFF_ENET	PROFF_SCC1
-#define SCC_ENET	0
-#define SIU_INT_ENET	SIU_INT_SCC1
-
-/* These are both board and SCC dependent....
-*/
-#define PD_ENET_RXD	((uint)0x00000001)
-#define PD_ENET_TXD	((uint)0x00000002)
-#define PD_ENET_TENA	((uint)0x00000004)
-#define PC_ENET_RENA	((uint)0x00020000)
-#define PC_ENET_CLSN	((uint)0x00000004)
-#define PC_ENET_TXCLK	((uint)0x00000800)
-#define PC_ENET_RXCLK	((uint)0x00000400)
-#define CMX_CLK_ROUTE	((uint)0x25000000)
-#define CMX_CLK_MASK	((uint)0xff000000)
-
-/* Specific to a board.
-*/
-#define PC_EST8260_ENET_LOOPBACK	((uint)0x80000000)
-#define PC_EST8260_ENET_SQE		((uint)0x40000000)
-#define PC_EST8260_ENET_NOTFD		((uint)0x20000000)
-
-static int
-scc_enet_open(struct net_device *dev)
-{
-
-	/* I should reset the ring buffers here, but I don't yet know
-	 * a simple way to do that.
-	 */
-	netif_start_queue(dev);
-	return 0;					/* Always succeed */
-}
-
-static int
-scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-	volatile cbd_t	*bdp;
-
-
-	/* Fill in a Tx ring entry */
-	bdp = cep->cur_tx;
-
-#ifndef final_version
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		/* Ooops.  All transmit buffers are full.  Bail out.
-		 * This should not happen, since cep->tx_full should be set.
-		 */
-		printk("%s: tx queue full!.\n", dev->name);
-		return 1;
-	}
-#endif
-
-	/* Clear all of the status flags.
-	 */
-	bdp->cbd_sc &= ~BD_ENET_TX_STATS;
-
-	/* If the frame is short, tell CPM to pad it.
-	*/
-	if (skb->len <= ETH_ZLEN)
-		bdp->cbd_sc |= BD_ENET_TX_PAD;
-	else
-		bdp->cbd_sc &= ~BD_ENET_TX_PAD;
-
-	/* Set buffer length and buffer pointer.
-	*/
-	bdp->cbd_datlen = skb->len;
-	bdp->cbd_bufaddr = __pa(skb->data);
-
-	/* Save skb pointer.
-	*/
-	cep->tx_skbuff[cep->skb_cur] = skb;
-
-	cep->stats.tx_bytes += skb->len;
-	cep->skb_cur = (cep->skb_cur+1) & TX_RING_MOD_MASK;
-
-	spin_lock_irq(&cep->lock);
-
-	/* Send it on its way.  Tell CPM its ready, interrupt when done,
-	 * its the last BD of the frame, and to put the CRC on the end.
-	 */
-	bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC);
-
-	dev->trans_start = jiffies;
-
-	/* If this was the last BD in the ring, start at the beginning again.
-	*/
-	if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-		bdp = cep->tx_bd_base;
-	else
-		bdp++;
-
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		netif_stop_queue(dev);
-		cep->tx_full = 1;
-	}
-
-	cep->cur_tx = (cbd_t *)bdp;
-
-	spin_unlock_irq(&cep->lock);
-
-	return 0;
-}
-
-static void
-scc_enet_timeout(struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-
-	printk("%s: transmit timed out.\n", dev->name);
-	cep->stats.tx_errors++;
-#ifndef final_version
-	{
-		int	i;
-		cbd_t	*bdp;
-		printk(" Ring data dump: cur_tx %p%s cur_rx %p.\n",
-		       cep->cur_tx, cep->tx_full ? " (full)" : "",
-		       cep->cur_rx);
-		bdp = cep->tx_bd_base;
-		printk(" Tx @base %p :\n", bdp);
-		for (i = 0 ; i < TX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-		bdp = cep->rx_bd_base;
-		printk(" Rx @base %p :\n", bdp);
-		for (i = 0 ; i < RX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-	}
-#endif
-	if (!cep->tx_full)
-		netif_wake_queue(dev);
-}
-
-/* The interrupt handler.
- * This is called from the CPM handler, not the MPC core interrupt.
- */
-static irqreturn_t
-scc_enet_interrupt(int irq, void *dev_id)
-{
-	struct	net_device *dev = dev_id;
-	volatile struct	scc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	ushort	int_events;
-	int	must_restart;
-
-	cep = dev->priv;
-
-	/* Get the interrupt events that caused us to be here.
-	*/
-	int_events = cep->sccp->scc_scce;
-	cep->sccp->scc_scce = int_events;
-	must_restart = 0;
-
-	/* Handle receive event in its own function.
-	*/
-	if (int_events & SCCE_ENET_RXF)
-		scc_enet_rx(dev_id);
-
-	/* Check for a transmit error.  The manual is a little unclear
-	 * about this, so the debug code until I get it figured out.  It
-	 * appears that if TXE is set, then TXB is not set.  However,
-	 * if carrier sense is lost during frame transmission, the TXE
-	 * bit is set, "and continues the buffer transmission normally."
-	 * I don't know if "normally" implies TXB is set when the buffer
-	 * descriptor is closed.....trial and error :-).
-	 */
-
-	/* Transmit OK, or non-fatal error.  Update the buffer descriptors.
-	*/
-	if (int_events & (SCCE_ENET_TXE | SCCE_ENET_TXB)) {
-	    spin_lock(&cep->lock);
-	    bdp = cep->dirty_tx;
-	    while ((bdp->cbd_sc&BD_ENET_TX_READY)==0) {
-		if ((bdp==cep->cur_tx) && (cep->tx_full == 0))
-		    break;
-
-		if (bdp->cbd_sc & BD_ENET_TX_HB)	/* No heartbeat */
-			cep->stats.tx_heartbeat_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_LC)	/* Late collision */
-			cep->stats.tx_window_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_RL)	/* Retrans limit */
-			cep->stats.tx_aborted_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_UN)	/* Underrun */
-			cep->stats.tx_fifo_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_CSL)	/* Carrier lost */
-			cep->stats.tx_carrier_errors++;
-
-
-		/* No heartbeat or Lost carrier are not really bad errors.
-		 * The others require a restart transmit command.
-		 */
-		if (bdp->cbd_sc &
-		    (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) {
-			must_restart = 1;
-			cep->stats.tx_errors++;
-		}
-
-		cep->stats.tx_packets++;
-
-		/* Deferred means some collisions occurred during transmit,
-		 * but we eventually sent the packet OK.
-		 */
-		if (bdp->cbd_sc & BD_ENET_TX_DEF)
-			cep->stats.collisions++;
-
-		/* Free the sk buffer associated with this last transmit.
-		*/
-		dev_kfree_skb_irq(cep->tx_skbuff[cep->skb_dirty]);
-		cep->skb_dirty = (cep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
-		/* Update pointer to next buffer descriptor to be transmitted.
-		*/
-		if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-			bdp = cep->tx_bd_base;
-		else
-			bdp++;
-
-		/* I don't know if we can be held off from processing these
-		 * interrupts for more than one frame time.  I really hope
-		 * not.  In such a case, we would now want to check the
-		 * currently available BD (cur_tx) and determine if any
-		 * buffers between the dirty_tx and cur_tx have also been
-		 * sent.  We would want to process anything in between that
-		 * does not have BD_ENET_TX_READY set.
-		 */
-
-		/* Since we have freed up a buffer, the ring is no longer
-		 * full.
-		 */
-		if (cep->tx_full) {
-			cep->tx_full = 0;
-			if (netif_queue_stopped(dev)) {
-				netif_wake_queue(dev);
-			}
-		}
-
-		cep->dirty_tx = (cbd_t *)bdp;
-	    }
-
-	    if (must_restart) {
-		volatile cpm_cpm2_t *cp;
-
-		/* Some transmit errors cause the transmitter to shut
-		 * down.  We now issue a restart transmit.  Since the
-		 * errors close the BD and update the pointers, the restart
-		 * _should_ pick up without having to reset any of our
-		 * pointers either.
-		 */
-
-		cp = cpmp;
-		cp->cp_cpcr =
-		    mk_cr_cmd(CPM_ENET_PAGE, CPM_ENET_BLOCK, 0,
-		    			CPM_CR_RESTART_TX) | CPM_CR_FLG;
-		while (cp->cp_cpcr & CPM_CR_FLG);
-	    }
-	    spin_unlock(&cep->lock);
-	}
-
-	/* Check for receive busy, i.e. packets coming but no place to
-	 * put them.  This "can't happen" because the receive interrupt
-	 * is tossing previous frames.
-	 */
-	if (int_events & SCCE_ENET_BSY) {
-		cep->stats.rx_dropped++;
-		printk("SCC ENET: BSY can't happen.\n");
-	}
-
-	return IRQ_HANDLED;
-}
-
-/* During a receive, the cur_rx points to the current incoming buffer.
- * When we update through the ring, if the next incoming buffer has
- * not been given to the system, we just set the empty indicator,
- * effectively tossing the packet.
- */
-static int
-scc_enet_rx(struct net_device *dev)
-{
-	struct	scc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	struct	sk_buff *skb;
-	ushort	pkt_len;
-
-	cep = dev->priv;
-
-	/* First, grab all of the stats for the incoming packet.
-	 * These get messed up if we get called due to a busy condition.
-	 */
-	bdp = cep->cur_rx;
-
-for (;;) {
-	if (bdp->cbd_sc & BD_ENET_RX_EMPTY)
-		break;
-
-#ifndef final_version
-	/* Since we have allocated space to hold a complete frame, both
-	 * the first and last indicators should be set.
-	 */
-	if ((bdp->cbd_sc & (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) !=
-		(BD_ENET_RX_FIRST | BD_ENET_RX_LAST))
-			printk("CPM ENET: rcv is not first+last\n");
-#endif
-
-	/* Frame too long or too short.
-	*/
-	if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
-		cep->stats.rx_length_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_NO)	/* Frame alignment */
-		cep->stats.rx_frame_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_CR)	/* CRC Error */
-		cep->stats.rx_crc_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_OV)	/* FIFO overrun */
-		cep->stats.rx_crc_errors++;
-
-	/* Report late collisions as a frame error.
-	 * On this error, the BD is closed, but we don't know what we
-	 * have in the buffer.  So, just drop this frame on the floor.
-	 */
-	if (bdp->cbd_sc & BD_ENET_RX_CL) {
-		cep->stats.rx_frame_errors++;
-	}
-	else {
-
-		/* Process the incoming frame.
-		*/
-		cep->stats.rx_packets++;
-		pkt_len = bdp->cbd_datlen;
-		cep->stats.rx_bytes += pkt_len;
-
-		/* This does 16 byte alignment, much more than we need.
-		 * The packet length includes FCS, but we don't want to
-		 * include that when passing upstream as it messes up
-		 * bridging applications.
-		 */
-		skb = dev_alloc_skb(pkt_len-4);
-
-		if (skb == NULL) {
-			printk("%s: Memory squeeze, dropping packet.\n", dev->name);
-			cep->stats.rx_dropped++;
-		}
-		else {
-			skb_put(skb,pkt_len-4);	/* Make room */
-			skb_copy_to_linear_data(skb,
-				(unsigned char *)__va(bdp->cbd_bufaddr),
-				pkt_len-4);
-			skb->protocol=eth_type_trans(skb,dev);
-			netif_rx(skb);
-		}
-	}
-
-	/* Clear the status flags for this buffer.
-	*/
-	bdp->cbd_sc &= ~BD_ENET_RX_STATS;
-
-	/* Mark the buffer empty.
-	*/
-	bdp->cbd_sc |= BD_ENET_RX_EMPTY;
-
-	/* Update BD pointer to next entry.
-	*/
-	if (bdp->cbd_sc & BD_ENET_RX_WRAP)
-		bdp = cep->rx_bd_base;
-	else
-		bdp++;
-
-   }
-	cep->cur_rx = (cbd_t *)bdp;
-
-	return 0;
-}
-
-static int
-scc_enet_close(struct net_device *dev)
-{
-	/* Don't know what to do yet.
-	*/
-	netif_stop_queue(dev);
-
-	return 0;
-}
-
-static struct net_device_stats *scc_enet_get_stats(struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-
-	return &cep->stats;
-}
-
-/* Set or clear the multicast filter for this adaptor.
- * Skeleton taken from sunlance driver.
- * The CPM Ethernet implementation allows Multicast as well as individual
- * MAC address filtering.  Some of the drivers check to make sure it is
- * a group multicast address, and discard those that are not.  I guess I
- * will do the same for now, but just remove the test if you want
- * individual filtering as well (do the upper net layers want or support
- * this kind of feature?).
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
-	struct	scc_enet_private *cep;
-	struct	dev_mc_list *dmi;
-	u_char	*mcptr, *tdptr;
-	volatile scc_enet_t *ep;
-	int	i, j;
-	cep = (struct scc_enet_private *)dev->priv;
-
-	/* Get pointer to SCC area in parameter RAM.
-	*/
-	ep = (scc_enet_t *)dev->base_addr;
-
-	if (dev->flags&IFF_PROMISC) {
-	
-		/* Log any net taps. */
-		printk("%s: Promiscuous mode enabled.\n", dev->name);
-		cep->sccp->scc_psmr |= SCC_PSMR_PRO;
-	} else {
-
-		cep->sccp->scc_psmr &= ~SCC_PSMR_PRO;
-
-		if (dev->flags & IFF_ALLMULTI) {
-			/* Catch all multicast addresses, so set the
-			 * filter to all 1's.
-			 */
-			ep->sen_gaddr1 = 0xffff;
-			ep->sen_gaddr2 = 0xffff;
-			ep->sen_gaddr3 = 0xffff;
-			ep->sen_gaddr4 = 0xffff;
-		}
-		else {
-			/* Clear filter and add the addresses in the list.
-			*/
-			ep->sen_gaddr1 = 0;
-			ep->sen_gaddr2 = 0;
-			ep->sen_gaddr3 = 0;
-			ep->sen_gaddr4 = 0;
-
-			dmi = dev->mc_list;
-
-			for (i=0; i<dev->mc_count; i++) {
-		
-				/* Only support group multicast for now.
-				*/
-				if (!(dmi->dmi_addr[0] & 1))
-					continue;
-
-				/* The address in dmi_addr is LSB first,
-				 * and taddr is MSB first.  We have to
-				 * copy bytes MSB first from dmi_addr.
-				 */
-				mcptr = (u_char *)dmi->dmi_addr + 5;
-				tdptr = (u_char *)&ep->sen_taddrh;
-				for (j=0; j<6; j++)
-					*tdptr++ = *mcptr--;
-
-				/* Ask CPM to run CRC and set bit in
-				 * filter mask.
-				 */
-				cpmp->cp_cpcr = mk_cr_cmd(CPM_ENET_PAGE,
-						CPM_ENET_BLOCK, 0,
-						CPM_CR_SET_GADDR) | CPM_CR_FLG;
-				/* this delay is necessary here -- Cort */
-				udelay(10);
-				while (cpmp->cp_cpcr & CPM_CR_FLG);
-			}
-		}
-	}
-}
-
-/* Initialize the CPM Ethernet on SCC.
- */
-static int __init scc_enet_init(void)
-{
-	struct net_device *dev;
-	struct scc_enet_private *cep;
-	int i, j, err;
-	uint dp_offset;
-	unsigned char	*eap;
-	unsigned long	mem_addr;
-	bd_t		*bd;
-	volatile	cbd_t		*bdp;
-	volatile	cpm_cpm2_t	*cp;
-	volatile	scc_t		*sccp;
-	volatile	scc_enet_t	*ep;
-	volatile	cpm2_map_t		*immap;
-	volatile	iop_cpm2_t	*io;
-
-	cp = cpmp;	/* Get pointer to Communication Processor */
-
-	immap = (cpm2_map_t *)CPM_MAP_ADDR;	/* and to internal registers */
-	io = &immap->im_ioport;
-
-	bd = (bd_t *)__res;
-
-	/* Create an Ethernet device instance.
-	*/
-	dev = alloc_etherdev(sizeof(*cep));
-	if (!dev)
-		return -ENOMEM;
-
-	cep = dev->priv;
-	spin_lock_init(&cep->lock);
-
-	/* Get pointer to SCC area in parameter RAM.
-	*/
-	ep = (scc_enet_t *)(&immap->im_dprambase[PROFF_ENET]);
-
-	/* And another to the SCC register area.
-	*/
-	sccp = (volatile scc_t *)(&immap->im_scc[SCC_ENET]);
-	cep->sccp = (scc_t *)sccp;		/* Keep the pointer handy */
-
-	/* Disable receive and transmit in case someone left it running.
-	*/
-	sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	/* Configure port C and D pins for SCC Ethernet.  This
-	 * won't work for all SCC possibilities....it will be
-	 * board/port specific.
-	 */
-	io->iop_pparc |=
-		(PC_ENET_RENA | PC_ENET_CLSN | PC_ENET_TXCLK | PC_ENET_RXCLK);
-	io->iop_pdirc &=
-		~(PC_ENET_RENA | PC_ENET_CLSN | PC_ENET_TXCLK | PC_ENET_RXCLK);
-	io->iop_psorc &=
-		~(PC_ENET_RENA | PC_ENET_TXCLK | PC_ENET_RXCLK);
-	io->iop_psorc |= PC_ENET_CLSN;
-
-	io->iop_ppard |= (PD_ENET_RXD | PD_ENET_TXD | PD_ENET_TENA);
-	io->iop_pdird |= (PD_ENET_TXD | PD_ENET_TENA);
-	io->iop_pdird &= ~PD_ENET_RXD;
-	io->iop_psord |= PD_ENET_TXD;
-	io->iop_psord &= ~(PD_ENET_RXD | PD_ENET_TENA);
-
-	/* Configure Serial Interface clock routing.
-	 * First, clear all SCC bits to zero, then set the ones we want.
-	 */
-	immap->im_cpmux.cmx_scr &= ~CMX_CLK_MASK;
-	immap->im_cpmux.cmx_scr |= CMX_CLK_ROUTE;
-
-	/* Allocate space for the buffer descriptors in the DP ram.
-	 * These are relative offsets in the DP ram address space.
-	 * Initialize base addresses for the buffer descriptors.
-	 */
-	dp_offset = cpm_dpalloc(sizeof(cbd_t) * RX_RING_SIZE, 8);
-	ep->sen_genscc.scc_rbase = dp_offset;
-	cep->rx_bd_base = (cbd_t *)cpm_dpram_addr(dp_offset);
-
-	dp_offset = cpm_dpalloc(sizeof(cbd_t) * TX_RING_SIZE, 8);
-	ep->sen_genscc.scc_tbase = dp_offset;
-	cep->tx_bd_base = (cbd_t *)cpm_dpram_addr(dp_offset);
-
-	cep->dirty_tx = cep->cur_tx = cep->tx_bd_base;
-	cep->cur_rx = cep->rx_bd_base;
-
-	ep->sen_genscc.scc_rfcr = CPMFCR_GBL | CPMFCR_EB;
-	ep->sen_genscc.scc_tfcr = CPMFCR_GBL | CPMFCR_EB;
-
-	/* Set maximum bytes per receive buffer.
-	 * This appears to be an Ethernet frame size, not the buffer
-	 * fragment size.  It must be a multiple of four.
-	 */
-	ep->sen_genscc.scc_mrblr = PKT_MAXBLR_SIZE;
-
-	/* Set CRC preset and mask.
-	*/
-	ep->sen_cpres = 0xffffffff;
-	ep->sen_cmask = 0xdebb20e3;
-
-	ep->sen_crcec = 0;	/* CRC Error counter */
-	ep->sen_alec = 0;	/* alignment error counter */
-	ep->sen_disfc = 0;	/* discard frame counter */
-
-	ep->sen_pads = 0x8888;	/* Tx short frame pad character */
-	ep->sen_retlim = 15;	/* Retry limit threshold */
-
-	ep->sen_maxflr = PKT_MAXBUF_SIZE;   /* maximum frame length register */
-	ep->sen_minflr = PKT_MINBUF_SIZE;  /* minimum frame length register */
-
-	ep->sen_maxd1 = PKT_MAXBLR_SIZE;	/* maximum DMA1 length */
-	ep->sen_maxd2 = PKT_MAXBLR_SIZE;	/* maximum DMA2 length */
-
-	/* Clear hash tables.
-	*/
-	ep->sen_gaddr1 = 0;
-	ep->sen_gaddr2 = 0;
-	ep->sen_gaddr3 = 0;
-	ep->sen_gaddr4 = 0;
-	ep->sen_iaddr1 = 0;
-	ep->sen_iaddr2 = 0;
-	ep->sen_iaddr3 = 0;
-	ep->sen_iaddr4 = 0;
-
-	/* Set Ethernet station address.
-	 *
-	 * This is supplied in the board information structure, so we
-	 * copy that into the controller.
-	 */
-	eap = (unsigned char *)&(ep->sen_paddrh);
-	for (i=5; i>=0; i--)
-		*eap++ = dev->dev_addr[i] = bd->bi_enetaddr[i];
-
-	ep->sen_pper = 0;	/* 'cause the book says so */
-	ep->sen_taddrl = 0;	/* temp address (LSB) */
-	ep->sen_taddrm = 0;
-	ep->sen_taddrh = 0;	/* temp address (MSB) */
-
-	/* Now allocate the host memory pages and initialize the
-	 * buffer descriptors.
-	 */
-	bdp = cep->tx_bd_base;
-	for (i=0; i<TX_RING_SIZE; i++) {
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		bdp->cbd_sc = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	bdp = cep->rx_bd_base;
-	for (i=0; i<CPM_ENET_RX_PAGES; i++) {
-
-		/* Allocate a page.
-		*/
-		mem_addr = __get_free_page(GFP_KERNEL);
-		/* BUG: no check for failure */
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		for (j=0; j<CPM_ENET_RX_FRPPG; j++) {
-			bdp->cbd_sc = BD_ENET_RX_EMPTY | BD_ENET_RX_INTR;
-			bdp->cbd_bufaddr = __pa(mem_addr);
-			mem_addr += CPM_ENET_RX_FRSIZE;
-			bdp++;
-		}
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* Let's re-initialize the channel now.  We have to do it later
-	 * than the manual describes because we have just now finished
-	 * the BD initialization.
-	 */
-	cpmp->cp_cpcr = mk_cr_cmd(CPM_ENET_PAGE, CPM_ENET_BLOCK, 0,
-			CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	cep->skb_cur = cep->skb_dirty = 0;
-
-	sccp->scc_scce = 0xffff;	/* Clear any pending events */
-
-	/* Enable interrupts for transmit error, complete frame
-	 * received, and any transmit buffer we have also set the
-	 * interrupt flag.
-	 */
-	sccp->scc_sccm = (SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB);
-
-	/* Install our interrupt handler.
-	*/
-	request_irq(SIU_INT_ENET, scc_enet_interrupt, 0, "enet", dev);
-	/* BUG: no check for failure */
-
-	/* Set GSMR_H to enable all normal operating modes.
-	 * Set GSMR_L to enable Ethernet to MC68160.
-	 */
-	sccp->scc_gsmrh = 0;
-	sccp->scc_gsmrl = (SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 | SCC_GSMRL_TPP_10 | SCC_GSMRL_MODE_ENET);
-
-	/* Set sync/delimiters.
-	*/
-	sccp->scc_dsr = 0xd555;
-
-	/* Set processing mode.  Use Ethernet CRC, catch broadcast, and
-	 * start frame search 22 bit times after RENA.
-	 */
-	sccp->scc_psmr = (SCC_PSMR_ENCRC | SCC_PSMR_NIB22);
-
-	/* It is now OK to enable the Ethernet transmitter.
-	 * Unfortunately, there are board implementation differences here.
-	 */
-	io->iop_pparc &= ~(PC_EST8260_ENET_LOOPBACK |
-				PC_EST8260_ENET_SQE | PC_EST8260_ENET_NOTFD);
-	io->iop_psorc &= ~(PC_EST8260_ENET_LOOPBACK |
-				PC_EST8260_ENET_SQE | PC_EST8260_ENET_NOTFD);
-	io->iop_pdirc |= (PC_EST8260_ENET_LOOPBACK |
-				PC_EST8260_ENET_SQE | PC_EST8260_ENET_NOTFD);
-	io->iop_pdatc &= ~(PC_EST8260_ENET_LOOPBACK | PC_EST8260_ENET_SQE);
-	io->iop_pdatc |= PC_EST8260_ENET_NOTFD;
-
-	dev->base_addr = (unsigned long)ep;
-
-	/* The CPM Ethernet specific entries in the device structure. */
-	dev->open = scc_enet_open;
-	dev->hard_start_xmit = scc_enet_start_xmit;
-	dev->tx_timeout = scc_enet_timeout;
-	dev->watchdog_timeo = TX_TIMEOUT;
-	dev->stop = scc_enet_close;
-	dev->get_stats = scc_enet_get_stats;
-	dev->set_multicast_list = set_multicast_list;
-
-	/* And last, enable the transmit and receive processing.
-	*/
-	sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	err = register_netdev(dev);
-	if (err) {
-		free_netdev(dev);
-		return err;
-	}
-
-	printk("%s: SCC ENET Version 0.1, ", dev->name);
-	for (i=0; i<5; i++)
-		printk("%02x:", dev->dev_addr[i]);
-	printk("%02x\n", dev->dev_addr[5]);
-
-	return 0;
-}
-
-module_init(scc_enet_init);
diff --git a/arch/ppc/8260_io/fcc_enet.c b/arch/ppc/8260_io/fcc_enet.c
deleted file mode 100644
index d38b57e24cee..000000000000
--- a/arch/ppc/8260_io/fcc_enet.c
+++ /dev/null
@@ -1,2379 +0,0 @@
-/*
- * Fast Ethernet Controller (FCC) driver for Motorola MPC8260.
- * Copyright (c) 2000 MontaVista Software, Inc.   Dan Malek (dmalek@jlc.net)
- *
- * This version of the driver is a combination of the 8xx fec and
- * 8260 SCC Ethernet drivers.  This version has some additional
- * configuration options, which should probably be moved out of
- * here.  This driver currently works for the EST SBC8260,
- * SBS Diablo/BCM, Embedded Planet RPX6, TQM8260, and others.
- *
- * Right now, I am very watseful with the buffers.  I allocate memory
- * pages and then divide them into 2K frame buffers.  This way I know I
- * have buffers large enough to hold one frame within one buffer descriptor.
- * Once I get this working, I will use 64 or 128 byte CPM buffers, which
- * will be much more memory efficient and will easily handle lots of
- * small packets.  Since this is a cache coherent processor and CPM,
- * I could also preallocate SKB's and use them directly on the interface.
- *
- * 2004-12	Leo Li (leoli@freescale.com)
- * - Rework the FCC clock configuration part, make it easier to configure.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/mii.h>
-#include <linux/workqueue.h>
-#include <linux/bitops.h>
-
-#include <asm/immap_cpm2.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8260.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/signal.h>
-
-/* We can't use the PHY interrupt if we aren't using MDIO. */
-#if !defined(CONFIG_USE_MDIO)
-#undef PHY_INTERRUPT
-#endif
-
-/* If we have a PHY interrupt, we will advertise both full-duplex and half-
- * duplex capabilities.  If we don't have a PHY interrupt, then we will only
- * advertise half-duplex capabilities.
- */
-#define MII_ADVERTISE_HALF	(ADVERTISE_100HALF | ADVERTISE_10HALF | \
-				 ADVERTISE_CSMA)
-#define MII_ADVERTISE_ALL	(ADVERTISE_100FULL | ADVERTISE_10FULL | \
-				 MII_ADVERTISE_HALF)
-#ifdef PHY_INTERRUPT
-#define MII_ADVERTISE_DEFAULT	MII_ADVERTISE_ALL
-#else
-#define MII_ADVERTISE_DEFAULT	MII_ADVERTISE_HALF
-#endif
-#include <asm/cpm2.h>
-
-/* The transmitter timeout
- */
-#define TX_TIMEOUT	(2*HZ)
-
-#ifdef	CONFIG_USE_MDIO
-/* Forward declarations of some structures to support different PHYs */
-
-typedef struct {
-	uint mii_data;
-	void (*funct)(uint mii_reg, struct net_device *dev);
-} phy_cmd_t;
-
-typedef struct {
-	uint id;
-	char *name;
-
-	const phy_cmd_t *config;
-	const phy_cmd_t *startup;
-	const phy_cmd_t *ack_int;
-	const phy_cmd_t *shutdown;
-} phy_info_t;
-
-/* values for phy_status */
-
-#define PHY_CONF_ANE	0x0001  /* 1 auto-negotiation enabled */
-#define PHY_CONF_LOOP	0x0002  /* 1 loopback mode enabled */
-#define PHY_CONF_SPMASK	0x00f0  /* mask for speed */
-#define PHY_CONF_10HDX	0x0010  /* 10 Mbit half duplex supported */
-#define PHY_CONF_10FDX	0x0020  /* 10 Mbit full duplex supported */
-#define PHY_CONF_100HDX	0x0040  /* 100 Mbit half duplex supported */
-#define PHY_CONF_100FDX	0x0080  /* 100 Mbit full duplex supported */
-
-#define PHY_STAT_LINK	0x0100  /* 1 up - 0 down */
-#define PHY_STAT_FAULT	0x0200  /* 1 remote fault */
-#define PHY_STAT_ANC	0x0400  /* 1 auto-negotiation complete	*/
-#define PHY_STAT_SPMASK	0xf000  /* mask for speed */
-#define PHY_STAT_10HDX	0x1000  /* 10 Mbit half duplex selected	*/
-#define PHY_STAT_10FDX	0x2000  /* 10 Mbit full duplex selected	*/
-#define PHY_STAT_100HDX	0x4000  /* 100 Mbit half duplex selected */
-#define PHY_STAT_100FDX	0x8000  /* 100 Mbit full duplex selected */
-#endif	/* CONFIG_USE_MDIO */
-
-/* The number of Tx and Rx buffers.  These are allocated from the page
- * pool.  The code may assume these are power of two, so it is best
- * to keep them that size.
- * We don't need to allocate pages for the transmitter.  We just use
- * the skbuffer directly.
- */
-#define FCC_ENET_RX_PAGES	16
-#define FCC_ENET_RX_FRSIZE	2048
-#define FCC_ENET_RX_FRPPG	(PAGE_SIZE / FCC_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(FCC_ENET_RX_FRPPG * FCC_ENET_RX_PAGES)
-#define TX_RING_SIZE		16	/* Must be power of two */
-#define TX_RING_MOD_MASK	15	/*   for this to work */
-
-/* The FCC stores dest/src/type, data, and checksum for receive packets.
- * size includes support for VLAN
- */
-#define PKT_MAXBUF_SIZE		1522
-#define PKT_MINBUF_SIZE		64
-
-/* Maximum input DMA size.  Must be a should(?) be a multiple of 4.
- * size includes support for VLAN
- */
-#define PKT_MAXDMA_SIZE		1524
-
-/* Maximum input buffer size.  Must be a multiple of 32.
-*/
-#define PKT_MAXBLR_SIZE		1536
-
-static int fcc_enet_open(struct net_device *dev);
-static int fcc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int fcc_enet_rx(struct net_device *dev);
-static irqreturn_t fcc_enet_interrupt(int irq, void *dev_id);
-static int fcc_enet_close(struct net_device *dev);
-static struct net_device_stats *fcc_enet_get_stats(struct net_device *dev);
-/* static void set_multicast_list(struct net_device *dev); */
-static void fcc_restart(struct net_device *dev, int duplex);
-static void fcc_stop(struct net_device *dev);
-static int fcc_enet_set_mac_address(struct net_device *dev, void *addr);
-
-/* These will be configurable for the FCC choice.
- * Multiple ports can be configured.  There is little choice among the
- * I/O pins to the PHY, except the clocks.  We will need some board
- * dependent clock selection.
- * Why in the hell did I put these inside #ifdef's?  I dunno, maybe to
- * help show what pins are used for each device.
- */
-
-/* Since the CLK setting changes greatly from board to board, I changed
- * it to a easy way.  You just need to specify which CLK number to use.
- * Note that only limited choices can be make on each port.
- */
-
-/* FCC1 Clock Source Configuration.  There are board specific.
-   Can only choose from CLK9-12 */
-#ifdef CONFIG_SBC82xx
-#define F1_RXCLK	9
-#define F1_TXCLK	10
-#else
-#define F1_RXCLK	12
-#define F1_TXCLK	11
-#endif
-
-/* FCC2 Clock Source Configuration.  There are board specific.
-   Can only choose from CLK13-16 */
-#define F2_RXCLK	13
-#define F2_TXCLK	14
-
-/* FCC3 Clock Source Configuration.  There are board specific.
-   Can only choose from CLK13-16 */
-#define F3_RXCLK	15
-#define F3_TXCLK	16
-
-/* Automatically generates register configurations */
-#define PC_CLK(x)	((uint)(1<<(x-1)))	/* FCC CLK I/O ports */
-
-#define CMXFCR_RF1CS(x)	((uint)((x-5)<<27))	/* FCC1 Receive Clock Source */
-#define CMXFCR_TF1CS(x)	((uint)((x-5)<<24))	/* FCC1 Transmit Clock Source */
-#define CMXFCR_RF2CS(x)	((uint)((x-9)<<19))	/* FCC2 Receive Clock Source */
-#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16))	/* FCC2 Transmit Clock Source */
-#define CMXFCR_RF3CS(x)	((uint)((x-9)<<11))	/* FCC3 Receive Clock Source */
-#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8))	/* FCC3 Transmit Clock Source */
-
-#define PC_F1RXCLK	PC_CLK(F1_RXCLK)
-#define PC_F1TXCLK	PC_CLK(F1_TXCLK)
-#define CMX1_CLK_ROUTE	(CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
-#define CMX1_CLK_MASK	((uint)0xff000000)
-
-#define PC_F2RXCLK	PC_CLK(F2_RXCLK)
-#define PC_F2TXCLK	PC_CLK(F2_TXCLK)
-#define CMX2_CLK_ROUTE	(CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
-#define CMX2_CLK_MASK	((uint)0x00ff0000)
-
-#define PC_F3RXCLK	PC_CLK(F3_RXCLK)
-#define PC_F3TXCLK	PC_CLK(F3_TXCLK)
-#define CMX3_CLK_ROUTE	(CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
-#define CMX3_CLK_MASK	((uint)0x0000ff00)
-
-
-/* I/O Pin assignment for FCC1.  I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PA1_COL		((uint)0x00000001)
-#define PA1_CRS		((uint)0x00000002)
-#define PA1_TXER	((uint)0x00000004)
-#define PA1_TXEN	((uint)0x00000008)
-#define PA1_RXDV	((uint)0x00000010)
-#define PA1_RXER	((uint)0x00000020)
-#define PA1_TXDAT	((uint)0x00003c00)
-#define PA1_RXDAT	((uint)0x0003c000)
-#define PA1_PSORA_BOUT	(PA1_RXDAT | PA1_TXDAT)
-#define PA1_PSORA_BIN	(PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
-				PA1_RXDV | PA1_RXER)
-#define PA1_DIRA_BOUT	(PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
-#define PA1_DIRA_BIN	(PA1_TXDAT | PA1_TXEN | PA1_TXER)
-
-
-/* I/O Pin assignment for FCC2.  I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB2_TXER	((uint)0x00000001)
-#define PB2_RXDV	((uint)0x00000002)
-#define PB2_TXEN	((uint)0x00000004)
-#define PB2_RXER	((uint)0x00000008)
-#define PB2_COL		((uint)0x00000010)
-#define PB2_CRS		((uint)0x00000020)
-#define PB2_TXDAT	((uint)0x000003c0)
-#define PB2_RXDAT	((uint)0x00003c00)
-#define PB2_PSORB_BOUT	(PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
-				PB2_RXER | PB2_RXDV | PB2_TXER)
-#define PB2_PSORB_BIN	(PB2_TXEN)
-#define PB2_DIRB_BOUT	(PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
-#define PB2_DIRB_BIN	(PB2_TXDAT | PB2_TXEN | PB2_TXER)
-
-
-/* I/O Pin assignment for FCC3.  I don't yet know the best way to do this,
- * but there is little variation among the choices.
- */
-#define PB3_RXDV	((uint)0x00004000)
-#define PB3_RXER	((uint)0x00008000)
-#define PB3_TXER	((uint)0x00010000)
-#define PB3_TXEN	((uint)0x00020000)
-#define PB3_COL		((uint)0x00040000)
-#define PB3_CRS		((uint)0x00080000)
-#ifndef CONFIG_RPX8260
-#define PB3_TXDAT	((uint)0x0f000000)
-#define PC3_TXDAT	((uint)0x00000000)
-#else
-#define PB3_TXDAT	((uint)0x0f000000)
-#define PC3_TXDAT	0
-#endif
-#define PB3_RXDAT	((uint)0x00f00000)
-#define PB3_PSORB_BOUT	(PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
-				PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
-#define PB3_PSORB_BIN	(0)
-#define PB3_DIRB_BOUT	(PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
-#define PB3_DIRB_BIN	(PB3_TXDAT | PB3_TXEN | PB3_TXER)
-
-#define PC3_PSORC_BOUT	(PC3_TXDAT)
-#define PC3_PSORC_BIN	(0)
-#define PC3_DIRC_BOUT	(0)
-#define PC3_DIRC_BIN	(PC3_TXDAT)
-
-
-/* MII status/control serial interface.
-*/
-#if defined(CONFIG_RPX8260)
-/* The EP8260 doesn't use Port C for MDIO */
-#define PC_MDIO		((uint)0x00000000)
-#define PC_MDCK		((uint)0x00000000)
-#elif defined(CONFIG_TQM8260)
-/* TQM8260 has MDIO and MDCK on PC30 and PC31 respectively */
-#define PC_MDIO		((uint)0x00000002)
-#define PC_MDCK		((uint)0x00000001)
-#elif defined(CONFIG_EST8260) || defined(CONFIG_ADS8260)
-#define PC_MDIO		((uint)0x00400000)
-#define PC_MDCK		((uint)0x00200000)
-#else
-#define PC_MDIO		((uint)0x00000004)
-#define PC_MDCK		((uint)0x00000020)
-#endif
-
-#if defined(CONFIG_USE_MDIO) && (!defined(PC_MDIO) || !defined(PC_MDCK))
-#error "Must define PC_MDIO and PC_MDCK if using MDIO"
-#endif
-
-/* PHY addresses */
-/* default to dynamic config of phy addresses */
-#define FCC1_PHY_ADDR 0
-#ifdef CONFIG_PQ2FADS
-#define FCC2_PHY_ADDR 0
-#else
-#define FCC2_PHY_ADDR 2
-#endif
-#define FCC3_PHY_ADDR 3
-
-/* A table of information for supporting FCCs.  This does two things.
- * First, we know how many FCCs we have and they are always externally
- * numbered from zero.  Second, it holds control register and I/O
- * information that could be different among board designs.
- */
-typedef struct fcc_info {
-	uint	fc_fccnum;
-	uint	fc_phyaddr;
-	uint	fc_cpmblock;
-	uint	fc_cpmpage;
-	uint	fc_proff;
-	uint	fc_interrupt;
-	uint	fc_trxclocks;
-	uint	fc_clockroute;
-	uint	fc_clockmask;
-	uint	fc_mdio;
-	uint	fc_mdck;
-} fcc_info_t;
-
-static fcc_info_t fcc_ports[] = {
-#ifdef CONFIG_FCC1_ENET
-	{ 0, FCC1_PHY_ADDR, CPM_CR_FCC1_SBLOCK, CPM_CR_FCC1_PAGE, PROFF_FCC1, SIU_INT_FCC1,
-		(PC_F1RXCLK | PC_F1TXCLK), CMX1_CLK_ROUTE, CMX1_CLK_MASK,
-		PC_MDIO, PC_MDCK },
-#endif
-#ifdef CONFIG_FCC2_ENET
-	{ 1, FCC2_PHY_ADDR, CPM_CR_FCC2_SBLOCK, CPM_CR_FCC2_PAGE, PROFF_FCC2, SIU_INT_FCC2,
-		(PC_F2RXCLK | PC_F2TXCLK), CMX2_CLK_ROUTE, CMX2_CLK_MASK,
-		PC_MDIO, PC_MDCK },
-#endif
-#ifdef CONFIG_FCC3_ENET
-	{ 2, FCC3_PHY_ADDR, CPM_CR_FCC3_SBLOCK, CPM_CR_FCC3_PAGE, PROFF_FCC3, SIU_INT_FCC3,
-		(PC_F3RXCLK | PC_F3TXCLK), CMX3_CLK_ROUTE, CMX3_CLK_MASK,
-		PC_MDIO, PC_MDCK },
-#endif
-};
-
-/* The FCC buffer descriptors track the ring buffers.  The rx_bd_base and
- * tx_bd_base always point to the base of the buffer descriptors.  The
- * cur_rx and cur_tx point to the currently available buffer.
- * The dirty_tx tracks the current buffer that is being sent by the
- * controller.  The cur_tx and dirty_tx are equal under both completely
- * empty and completely full conditions.  The empty/ready indicator in
- * the buffer descriptor determines the actual condition.
- */
-struct fcc_enet_private {
-	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
-	struct	sk_buff* tx_skbuff[TX_RING_SIZE];
-	ushort	skb_cur;
-	ushort	skb_dirty;
-
-	/* CPM dual port RAM relative addresses.
-	*/
-	cbd_t	*rx_bd_base;		/* Address of Rx and Tx buffers. */
-	cbd_t	*tx_bd_base;
-	cbd_t	*cur_rx, *cur_tx;		/* The next free ring entry */
-	cbd_t	*dirty_tx;	/* The ring entries to be free()ed. */
-	volatile fcc_t	*fccp;
-	volatile fcc_enet_t	*ep;
-	struct	net_device_stats stats;
-	uint	tx_free;
-	spinlock_t lock;
-
-#ifdef	CONFIG_USE_MDIO
-	uint	phy_id;
-	uint	phy_id_done;
-	uint	phy_status;
-	phy_info_t	*phy;
-	struct work_struct phy_relink;
-	struct work_struct phy_display_config;
-	struct net_device *dev;
-
-	uint	sequence_done;
-
-	uint	phy_addr;
-#endif	/* CONFIG_USE_MDIO */
-
-	int	link;
-	int	old_link;
-	int	full_duplex;
-
-	fcc_info_t	*fip;
-};
-
-static void init_fcc_shutdown(fcc_info_t *fip, struct fcc_enet_private *cep,
-	volatile cpm2_map_t *immap);
-static void init_fcc_startup(fcc_info_t *fip, struct net_device *dev);
-static void init_fcc_ioports(fcc_info_t *fip, volatile iop_cpm2_t *io,
-	volatile cpm2_map_t *immap);
-static void init_fcc_param(fcc_info_t *fip, struct net_device *dev,
-	volatile cpm2_map_t *immap);
-
-#ifdef	CONFIG_USE_MDIO
-static int	mii_queue(struct net_device *dev, int request, void (*func)(uint, struct net_device *));
-static uint	mii_send_receive(fcc_info_t *fip, uint cmd);
-static void	mii_do_cmd(struct net_device *dev, const phy_cmd_t *c);
-
-/* Make MII read/write commands for the FCC.
-*/
-#define mk_mii_read(REG)	(0x60020000 | (((REG) & 0x1f) << 18))
-#define mk_mii_write(REG, VAL)	(0x50020000 | (((REG) & 0x1f) << 18) | \
-						((VAL) & 0xffff))
-#define mk_mii_end	0
-#endif	/* CONFIG_USE_MDIO */
-
-
-static int
-fcc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct fcc_enet_private *cep = (struct fcc_enet_private *)dev->priv;
-	volatile cbd_t	*bdp;
-
-	/* Fill in a Tx ring entry */
-	bdp = cep->cur_tx;
-
-#ifndef final_version
-	if (!cep->tx_free || (bdp->cbd_sc & BD_ENET_TX_READY)) {
-		/* Ooops.  All transmit buffers are full.  Bail out.
-		 * This should not happen, since the tx queue should be stopped.
-		 */
-		printk("%s: tx queue full!.\n", dev->name);
-		return 1;
-	}
-#endif
-
-	/* Clear all of the status flags. */
-	bdp->cbd_sc &= ~BD_ENET_TX_STATS;
-
-	/* If the frame is short, tell CPM to pad it. */
-	if (skb->len <= ETH_ZLEN)
-		bdp->cbd_sc |= BD_ENET_TX_PAD;
-	else
-		bdp->cbd_sc &= ~BD_ENET_TX_PAD;
-
-	/* Set buffer length and buffer pointer. */
-	bdp->cbd_datlen = skb->len;
-	bdp->cbd_bufaddr = __pa(skb->data);
-
-	spin_lock_irq(&cep->lock);
-
-	/* Save skb pointer. */
-	cep->tx_skbuff[cep->skb_cur] = skb;
-
-	cep->stats.tx_bytes += skb->len;
-	cep->skb_cur = (cep->skb_cur+1) & TX_RING_MOD_MASK;
-
-	/* Send it on its way.  Tell CPM its ready, interrupt when done,
-	 * its the last BD of the frame, and to put the CRC on the end.
-	 */
-	bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC);
-
-#if 0
-	/* Errata says don't do this. */
-	cep->fccp->fcc_ftodr = 0x8000;
-#endif
-	dev->trans_start = jiffies;
-
-	/* If this was the last BD in the ring, start at the beginning again. */
-	if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-		bdp = cep->tx_bd_base;
-	else
-		bdp++;
-
-	if (!--cep->tx_free)
-		netif_stop_queue(dev);
-
-	cep->cur_tx = (cbd_t *)bdp;
-
-	spin_unlock_irq(&cep->lock);
-
-	return 0;
-}
-
-
-static void
-fcc_enet_timeout(struct net_device *dev)
-{
-	struct fcc_enet_private *cep = (struct fcc_enet_private *)dev->priv;
-
-	printk("%s: transmit timed out.\n", dev->name);
-	cep->stats.tx_errors++;
-#ifndef final_version
-	{
-		int	i;
-		cbd_t	*bdp;
-		printk(" Ring data dump: cur_tx %p tx_free %d cur_rx %p.\n",
-		       cep->cur_tx, cep->tx_free,
-		       cep->cur_rx);
-		bdp = cep->tx_bd_base;
-		printk(" Tx @base %p :\n", bdp);
-		for (i = 0 ; i < TX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-		bdp = cep->rx_bd_base;
-		printk(" Rx @base %p :\n", bdp);
-		for (i = 0 ; i < RX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-	}
-#endif
-	if (cep->tx_free)
-		netif_wake_queue(dev);
-}
-
-/* The interrupt handler. */
-static irqreturn_t
-fcc_enet_interrupt(int irq, void *dev_id)
-{
-	struct	net_device *dev = dev_id;
-	volatile struct	fcc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	ushort	int_events;
-	int	must_restart;
-
-	cep = dev->priv;
-
-	/* Get the interrupt events that caused us to be here.
-	*/
-	int_events = cep->fccp->fcc_fcce;
-	cep->fccp->fcc_fcce = (int_events & cep->fccp->fcc_fccm);
-	must_restart = 0;
-
-#ifdef PHY_INTERRUPT
-	/* We have to be careful here to make sure that we aren't
-	 * interrupted by a PHY interrupt.
-	 */
-	disable_irq_nosync(PHY_INTERRUPT);
-#endif
-
-	/* Handle receive event in its own function.
-	*/
-	if (int_events & FCC_ENET_RXF)
-		fcc_enet_rx(dev_id);
-
-	/* Check for a transmit error.  The manual is a little unclear
-	 * about this, so the debug code until I get it figured out.  It
-	 * appears that if TXE is set, then TXB is not set.  However,
-	 * if carrier sense is lost during frame transmission, the TXE
-	 * bit is set, "and continues the buffer transmission normally."
-	 * I don't know if "normally" implies TXB is set when the buffer
-	 * descriptor is closed.....trial and error :-).
-	 */
-
-	/* Transmit OK, or non-fatal error.  Update the buffer descriptors.
-	*/
-	if (int_events & (FCC_ENET_TXE | FCC_ENET_TXB)) {
-	    spin_lock(&cep->lock);
-	    bdp = cep->dirty_tx;
-	    while ((bdp->cbd_sc&BD_ENET_TX_READY)==0) {
-		if (cep->tx_free == TX_RING_SIZE)
-		    break;
-
-		if (bdp->cbd_sc & BD_ENET_TX_HB)	/* No heartbeat */
-			cep->stats.tx_heartbeat_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_LC)	/* Late collision */
-			cep->stats.tx_window_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_RL)	/* Retrans limit */
-			cep->stats.tx_aborted_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_UN)	/* Underrun */
-			cep->stats.tx_fifo_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_CSL)	/* Carrier lost */
-			cep->stats.tx_carrier_errors++;
-
-
-		/* No heartbeat or Lost carrier are not really bad errors.
-		 * The others require a restart transmit command.
-		 */
-		if (bdp->cbd_sc &
-		    (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) {
-			must_restart = 1;
-			cep->stats.tx_errors++;
-		}
-
-		cep->stats.tx_packets++;
-
-		/* Deferred means some collisions occurred during transmit,
-		 * but we eventually sent the packet OK.
-		 */
-		if (bdp->cbd_sc & BD_ENET_TX_DEF)
-			cep->stats.collisions++;
-
-		/* Free the sk buffer associated with this last transmit. */
-		dev_kfree_skb_irq(cep->tx_skbuff[cep->skb_dirty]);
-		cep->tx_skbuff[cep->skb_dirty] = NULL;
-		cep->skb_dirty = (cep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
-		/* Update pointer to next buffer descriptor to be transmitted. */
-		if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-			bdp = cep->tx_bd_base;
-		else
-			bdp++;
-
-		/* I don't know if we can be held off from processing these
-		 * interrupts for more than one frame time.  I really hope
-		 * not.  In such a case, we would now want to check the
-		 * currently available BD (cur_tx) and determine if any
-		 * buffers between the dirty_tx and cur_tx have also been
-		 * sent.  We would want to process anything in between that
-		 * does not have BD_ENET_TX_READY set.
-		 */
-
-		/* Since we have freed up a buffer, the ring is no longer
-		 * full.
-		 */
-		if (!cep->tx_free++) {
-			if (netif_queue_stopped(dev)) {
-				netif_wake_queue(dev);
-			}
-		}
-
-		cep->dirty_tx = (cbd_t *)bdp;
-	    }
-
-	    if (must_restart) {
-		volatile cpm_cpm2_t *cp;
-
-		/* Some transmit errors cause the transmitter to shut
-		 * down.  We now issue a restart transmit.  Since the
-		 * errors close the BD and update the pointers, the restart
-		 * _should_ pick up without having to reset any of our
-		 * pointers either.  Also, To workaround 8260 device erratum
-		 * CPM37, we must disable and then re-enable the transmitter
-		 * following a Late Collision, Underrun, or Retry Limit error.
-		 */
-		cep->fccp->fcc_gfmr &= ~FCC_GFMR_ENT;
-		udelay(10); /* wait a few microseconds just on principle */
-		cep->fccp->fcc_gfmr |=  FCC_GFMR_ENT;
-
-		cp = cpmp;
-		cp->cp_cpcr =
-		    mk_cr_cmd(cep->fip->fc_cpmpage, cep->fip->fc_cpmblock,
-		    		0x0c, CPM_CR_RESTART_TX) | CPM_CR_FLG;
-		while (cp->cp_cpcr & CPM_CR_FLG);
-	    }
-	    spin_unlock(&cep->lock);
-	}
-
-	/* Check for receive busy, i.e. packets coming but no place to
-	 * put them.
-	 */
-	if (int_events & FCC_ENET_BSY) {
-		cep->fccp->fcc_fcce = FCC_ENET_BSY;
-		cep->stats.rx_dropped++;
-	}
-
-#ifdef PHY_INTERRUPT
-	enable_irq(PHY_INTERRUPT);
-#endif
-	return IRQ_HANDLED;
-}
-
-/* During a receive, the cur_rx points to the current incoming buffer.
- * When we update through the ring, if the next incoming buffer has
- * not been given to the system, we just set the empty indicator,
- * effectively tossing the packet.
- */
-static int
-fcc_enet_rx(struct net_device *dev)
-{
-	struct	fcc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	struct	sk_buff *skb;
-	ushort	pkt_len;
-
-	cep = dev->priv;
-
-	/* First, grab all of the stats for the incoming packet.
-	 * These get messed up if we get called due to a busy condition.
-	 */
-	bdp = cep->cur_rx;
-
-for (;;) {
-	if (bdp->cbd_sc & BD_ENET_RX_EMPTY)
-		break;
-
-#ifndef final_version
-	/* Since we have allocated space to hold a complete frame, both
-	 * the first and last indicators should be set.
-	 */
-	if ((bdp->cbd_sc & (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) !=
-		(BD_ENET_RX_FIRST | BD_ENET_RX_LAST))
-			printk("CPM ENET: rcv is not first+last\n");
-#endif
-
-	/* Frame too long or too short. */
-	if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
-		cep->stats.rx_length_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_NO)	/* Frame alignment */
-		cep->stats.rx_frame_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_CR)	/* CRC Error */
-		cep->stats.rx_crc_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_OV)	/* FIFO overrun */
-		cep->stats.rx_crc_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_CL)	/* Late Collision */
-		cep->stats.rx_frame_errors++;
-
-	if (!(bdp->cbd_sc &
-	      (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO | BD_ENET_RX_CR
-	       | BD_ENET_RX_OV | BD_ENET_RX_CL)))
-	{
-		/* Process the incoming frame. */
-		cep->stats.rx_packets++;
-
-		/* Remove the FCS from the packet length. */
-		pkt_len = bdp->cbd_datlen - 4;
-		cep->stats.rx_bytes += pkt_len;
-
-		/* This does 16 byte alignment, much more than we need. */
-		skb = dev_alloc_skb(pkt_len);
-
-		if (skb == NULL) {
-			printk("%s: Memory squeeze, dropping packet.\n", dev->name);
-			cep->stats.rx_dropped++;
-		}
-		else {
-			skb_put(skb,pkt_len);	/* Make room */
-			skb_copy_to_linear_data(skb,
-				(unsigned char *)__va(bdp->cbd_bufaddr),
-				pkt_len);
-			skb->protocol=eth_type_trans(skb,dev);
-			netif_rx(skb);
-		}
-	}
-
-	/* Clear the status flags for this buffer. */
-	bdp->cbd_sc &= ~BD_ENET_RX_STATS;
-
-	/* Mark the buffer empty. */
-	bdp->cbd_sc |= BD_ENET_RX_EMPTY;
-
-	/* Update BD pointer to next entry. */
-	if (bdp->cbd_sc & BD_ENET_RX_WRAP)
-		bdp = cep->rx_bd_base;
-	else
-		bdp++;
-
-   }
-	cep->cur_rx = (cbd_t *)bdp;
-
-	return 0;
-}
-
-static int
-fcc_enet_close(struct net_device *dev)
-{
-#ifdef	CONFIG_USE_MDIO
-	struct fcc_enet_private *fep = dev->priv;
-#endif
-
-	netif_stop_queue(dev);
-	fcc_stop(dev);
-#ifdef	CONFIG_USE_MDIO
-	if (fep->phy)
-		mii_do_cmd(dev, fep->phy->shutdown);
-#endif
-
-	return 0;
-}
-
-static struct net_device_stats *fcc_enet_get_stats(struct net_device *dev)
-{
-	struct fcc_enet_private *cep = (struct fcc_enet_private *)dev->priv;
-
-	return &cep->stats;
-}
-
-#ifdef	CONFIG_USE_MDIO
-
-/* NOTE: Most of the following comes from the FEC driver for 860. The
- * overall structure of MII code has been retained (as it's proved stable
- * and well-tested), but actual transfer requests are processed "at once"
- * instead of being queued (there's no interrupt-driven MII transfer
- * mechanism, one has to toggle the data/clock bits manually).
- */
-static int
-mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_device *))
-{
-	struct fcc_enet_private *fep;
-	int		retval, tmp;
-
-	/* Add PHY address to register command. */
-	fep = dev->priv;
-	regval |= fep->phy_addr << 23;
-
-	retval = 0;
-
-	tmp = mii_send_receive(fep->fip, regval);
-	if (func)
-		func(tmp, dev);
-
-	return retval;
-}
-
-static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
-{
-	int k;
-
-	if(!c)
-		return;
-
-	for(k = 0; (c+k)->mii_data != mk_mii_end; k++)
-		mii_queue(dev, (c+k)->mii_data, (c+k)->funct);
-}
-
-static void mii_parse_sr(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC);
-
-	if (mii_reg & BMSR_LSTATUS)
-		s |= PHY_STAT_LINK;
-	if (mii_reg & BMSR_RFAULT)
-		s |= PHY_STAT_FAULT;
-	if (mii_reg & BMSR_ANEGCOMPLETE)
-		s |= PHY_STAT_ANC;
-
-	fep->phy_status = s;
-}
-
-static void mii_parse_cr(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_CONF_ANE | PHY_CONF_LOOP);
-
-	if (mii_reg & BMCR_ANENABLE)
-		s |= PHY_CONF_ANE;
-	if (mii_reg & BMCR_LOOPBACK)
-		s |= PHY_CONF_LOOP;
-
-	fep->phy_status = s;
-}
-
-static void mii_parse_anar(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_CONF_SPMASK);
-
-	if (mii_reg & ADVERTISE_10HALF)
-		s |= PHY_CONF_10HDX;
-	if (mii_reg & ADVERTISE_10FULL)
-		s |= PHY_CONF_10FDX;
-	if (mii_reg & ADVERTISE_100HALF)
-		s |= PHY_CONF_100HDX;
-	if (mii_reg & ADVERTISE_100FULL)
-		s |= PHY_CONF_100FDX;
-
-	fep->phy_status = s;
-}
-
-/* ------------------------------------------------------------------------- */
-/* Generic PHY support.  Should work for all PHYs, but does not support link
- * change interrupts.
- */
-#ifdef CONFIG_FCC_GENERIC_PHY
-
-static phy_info_t phy_info_generic = {
-	0x00000000, /* 0-->match any PHY */
-	"GENERIC",
-
-	(const phy_cmd_t []) {  /* config */
-		/* advertise only half-duplex capabilities */
-		{ mk_mii_write(MII_ADVERTISE, MII_ADVERTISE_HALF),
-			mii_parse_anar },
-
-		/* enable auto-negotiation */
-		{ mk_mii_write(MII_BMCR, BMCR_ANENABLE), mii_parse_cr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup */
-		/* restart auto-negotiation */
-		{ mk_mii_write(MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART),
-			NULL },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* We don't actually use the ack_int table with a generic
-		 * PHY, but putting a reference to mii_parse_sr here keeps
-		 * us from getting a compiler warning about unused static
-		 * functions in the case where we only compile in generic
-		 * PHY support.
-		 */
-		{ mk_mii_read(MII_BMSR), mii_parse_sr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown */
-		{ mk_mii_end, }
-	},
-};
-#endif	/* ifdef CONFIG_FCC_GENERIC_PHY */
-
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT970 is used by many boards				     */
-
-#ifdef CONFIG_FCC_LXT970
-
-#define MII_LXT970_MIRROR    16  /* Mirror register           */
-#define MII_LXT970_IER       17  /* Interrupt Enable Register */
-#define MII_LXT970_ISR       18  /* Interrupt Status Register */
-#define MII_LXT970_CONFIG    19  /* Configuration Register    */
-#define MII_LXT970_CSR       20  /* Chip Status Register      */
-
-static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-
-	if (mii_reg & 0x0800) {
-		if (mii_reg & 0x1000)
-			s |= PHY_STAT_100FDX;
-		else
-			s |= PHY_STAT_100HDX;
-	} else {
-		if (mii_reg & 0x1000)
-			s |= PHY_STAT_10FDX;
-		else
-			s |= PHY_STAT_10HDX;
-	}
-
-	fep->phy_status = s;
-}
-
-static phy_info_t phy_info_lxt970 = {
-	0x07810000,
-	"LXT970",
-
-	(const phy_cmd_t []) {  /* config */
-#if 0
-//		{ mk_mii_write(MII_ADVERTISE, 0x0021), NULL },
-
-		/* Set default operation of 100-TX....for some reason
-		 * some of these bits are set on power up, which is wrong.
-		 */
-		{ mk_mii_write(MII_LXT970_CONFIG, 0), NULL },
-#endif
-		{ mk_mii_read(MII_BMCR), mii_parse_cr },
-		{ mk_mii_read(MII_ADVERTISE), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_LXT970_IER, 0x0002), NULL },
-		{ mk_mii_write(MII_BMCR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* read SR and ISR to acknowledge */
-
-		{ mk_mii_read(MII_BMSR), mii_parse_sr },
-		{ mk_mii_read(MII_LXT970_ISR), NULL },
-
-		/* find out the current status */
-
-		{ mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_LXT970_IER, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FEC_LXT970 */
-
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT971 is used on some of my custom boards                  */
-
-#ifdef CONFIG_FCC_LXT971
-
-/* register definitions for the 971 */
-
-#define MII_LXT971_PCR       16  /* Port Control Register     */
-#define MII_LXT971_SR2       17  /* Status Register 2         */
-#define MII_LXT971_IER       18  /* Interrupt Enable Register */
-#define MII_LXT971_ISR       19  /* Interrupt Status Register */
-#define MII_LXT971_LCR       20  /* LED Control Register      */
-#define MII_LXT971_TCR       30  /* Transmit Control Register */
-
-/*
- * I had some nice ideas of running the MDIO faster...
- * The 971 should support 8MHz and I tried it, but things acted really
- * weird, so 2.5 MHz ought to be enough for anyone...
- */
-
-static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-
-	if (mii_reg & 0x4000) {
-		if (mii_reg & 0x0200)
-			s |= PHY_STAT_100FDX;
-		else
-			s |= PHY_STAT_100HDX;
-	} else {
-		if (mii_reg & 0x0200)
-			s |= PHY_STAT_10FDX;
-		else
-			s |= PHY_STAT_10HDX;
-	}
-	if (mii_reg & 0x0008)
-		s |= PHY_STAT_FAULT;
-
-	fep->phy_status = s;
-}
-
-static phy_info_t phy_info_lxt971 = {
-	0x0001378e,
-	"LXT971",
-
-	(const phy_cmd_t []) {  /* config */
-		/* configure link capabilities to advertise */
-		{ mk_mii_write(MII_ADVERTISE, MII_ADVERTISE_DEFAULT),
-			mii_parse_anar },
-
-		/* enable auto-negotiation */
-		{ mk_mii_write(MII_BMCR, BMCR_ANENABLE), mii_parse_cr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_LXT971_IER, 0x00f2), NULL },
-
-		/* restart auto-negotiation */
-		{ mk_mii_write(MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART),
-			NULL },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* find out the current status */
-		{ mk_mii_read(MII_BMSR), NULL },
-		{ mk_mii_read(MII_BMSR), mii_parse_sr },
-		{ mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 },
-
-		/* we only need to read ISR to acknowledge */
-		{ mk_mii_read(MII_LXT971_ISR), NULL },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_LXT971_IER, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FCC_LXT971 */
-
-/* ------------------------------------------------------------------------- */
-/* The Quality Semiconductor QS6612 is used on the RPX CLLF                  */
-
-#ifdef CONFIG_FCC_QS6612
-
-/* register definitions */
-
-#define MII_QS6612_MCR       17  /* Mode Control Register      */
-#define MII_QS6612_FTR       27  /* Factory Test Register      */
-#define MII_QS6612_MCO       28  /* Misc. Control Register     */
-#define MII_QS6612_ISR       29  /* Interrupt Source Register  */
-#define MII_QS6612_IMR       30  /* Interrupt Mask Register    */
-#define MII_QS6612_PCR       31  /* 100BaseTx PHY Control Reg. */
-
-static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-
-	switch((mii_reg >> 2) & 7) {
-	case 1: s |= PHY_STAT_10HDX;  break;
-	case 2: s |= PHY_STAT_100HDX; break;
-	case 5: s |= PHY_STAT_10FDX;  break;
-	case 6: s |= PHY_STAT_100FDX; break;
-	}
-
-	fep->phy_status = s;
-}
-
-static phy_info_t phy_info_qs6612 = {
-	0x00181440,
-	"QS6612",
-
-	(const phy_cmd_t []) {  /* config */
-//	{ mk_mii_write(MII_ADVERTISE, 0x061), NULL }, /* 10  Mbps */
-
-		/* The PHY powers up isolated on the RPX,
-		 * so send a command to allow operation.
-		 */
-
-		{ mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL },
-
-		/* parse cr and anar to get some info */
-
-		{ mk_mii_read(MII_BMCR), mii_parse_cr },
-		{ mk_mii_read(MII_ADVERTISE), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_QS6612_IMR, 0x003a), NULL },
-		{ mk_mii_write(MII_BMCR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-
-		/* we need to read ISR, SR and ANER to acknowledge */
-
-		{ mk_mii_read(MII_QS6612_ISR), NULL },
-		{ mk_mii_read(MII_BMSR), mii_parse_sr },
-		{ mk_mii_read(MII_EXPANSION), NULL },
-
-		/* read pcr to get info */
-
-		{ mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_QS6612_IMR, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-
-#endif /* CONFIG_FEC_QS6612 */
-
-
-/* ------------------------------------------------------------------------- */
-/* The Davicom DM9131 is used on the HYMOD board			     */
-
-#ifdef CONFIG_FCC_DM9131
-
-/* register definitions */
-
-#define MII_DM9131_ACR		16	/* Aux. Config Register		*/
-#define MII_DM9131_ACSR		17	/* Aux. Config/Status Register	*/
-#define MII_DM9131_10TCSR	18	/* 10BaseT Config/Status Reg.	*/
-#define MII_DM9131_INTR		21	/* Interrupt Register		*/
-#define MII_DM9131_RECR		22	/* Receive Error Counter Reg.	*/
-#define MII_DM9131_DISCR	23	/* Disconnect Counter Register	*/
-
-static void mii_parse_dm9131_acsr(uint mii_reg, struct net_device *dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-
-	switch ((mii_reg >> 12) & 0xf) {
-	case 1: s |= PHY_STAT_10HDX;  break;
-	case 2: s |= PHY_STAT_10FDX;  break;
-	case 4: s |= PHY_STAT_100HDX; break;
-	case 8: s |= PHY_STAT_100FDX; break;
-	}
-
-	fep->phy_status = s;
-}
-
-static phy_info_t phy_info_dm9131 = {
-	0x00181b80,
-	"DM9131",
-
-	(const phy_cmd_t []) {  /* config */
-		/* parse cr and anar to get some info */
-		{ mk_mii_read(MII_BMCR), mii_parse_cr },
-		{ mk_mii_read(MII_ADVERTISE), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_DM9131_INTR, 0x0002), NULL },
-		{ mk_mii_write(MII_BMCR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-
-		/* we need to read INTR, SR and ANER to acknowledge */
-
-		{ mk_mii_read(MII_DM9131_INTR), NULL },
-		{ mk_mii_read(MII_BMSR), mii_parse_sr },
-		{ mk_mii_read(MII_EXPANSION), NULL },
-
-		/* read acsr to get info */
-
-		{ mk_mii_read(MII_DM9131_ACSR), mii_parse_dm9131_acsr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_DM9131_INTR, 0x0f00), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-
-#endif /* CONFIG_FEC_DM9131 */
-#ifdef CONFIG_FCC_DM9161
-/* ------------------------------------------------------------------------- */
-/* DM9161 Control register values */
-#define MIIM_DM9161_CR_STOP     0x0400
-#define MIIM_DM9161_CR_RSTAN    0x1200
-
-#define MIIM_DM9161_SCR         0x10
-#define MIIM_DM9161_SCR_INIT    0x0610
-
-/* DM9161 Specified Configuration and Status Register */
-#define MIIM_DM9161_SCSR        0x11
-#define MIIM_DM9161_SCSR_100F   0x8000
-#define MIIM_DM9161_SCSR_100H   0x4000
-#define MIIM_DM9161_SCSR_10F    0x2000
-#define MIIM_DM9161_SCSR_10H    0x1000
-/* DM9161 10BT register */
-#define MIIM_DM9161_10BTCSR 	0x12
-#define MIIM_DM9161_10BTCSR_INIT 0x7800
-/* DM9161 Interrupt Register */
-#define MIIM_DM9161_INTR        0x15
-#define MIIM_DM9161_INTR_PEND           0x8000
-#define MIIM_DM9161_INTR_DPLX_MASK      0x0800
-#define MIIM_DM9161_INTR_SPD_MASK       0x0400
-#define MIIM_DM9161_INTR_LINK_MASK      0x0200
-#define MIIM_DM9161_INTR_MASK           0x0100
-#define MIIM_DM9161_INTR_DPLX_CHANGE    0x0010
-#define MIIM_DM9161_INTR_SPD_CHANGE     0x0008
-#define MIIM_DM9161_INTR_LINK_CHANGE    0x0004
-#define MIIM_DM9161_INTR_INIT           0x0000
-#define MIIM_DM9161_INTR_STOP   \
-(MIIM_DM9161_INTR_DPLX_MASK | MIIM_DM9161_INTR_SPD_MASK \
-  | MIIM_DM9161_INTR_LINK_MASK | MIIM_DM9161_INTR_MASK)
-
-static void mii_parse_dm9161_sr(uint mii_reg, struct net_device * dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint regstat,  timeout=0xffff;
-
-	while(!(mii_reg & 0x0020) && timeout--)
-	{
-		regstat=mk_mii_read(MII_BMSR);
-	        regstat |= fep->phy_addr <<23;
-	        mii_reg = mii_send_receive(fep->fip,regstat);
-	}
-
-	mii_parse_sr(mii_reg, dev);
-}
-
-static void mii_parse_dm9161_scsr(uint mii_reg, struct net_device * dev)
-{
-	volatile struct fcc_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-	switch((mii_reg >>12) & 0xf) {
-		case 1:
-		{
-			s |= PHY_STAT_10HDX;
-			printk("10BaseT Half Duplex\n");
-			break;
-		}
-		case 2:
-		{
-			s |= PHY_STAT_10FDX;
-		        printk("10BaseT Full Duplex\n");
-			break;
-		}
-		case 4:
-	        {
-			s |= PHY_STAT_100HDX;
-		        printk("100BaseT Half Duplex\n");
-			break;
-		}
-		case 8:
-		{
-			s |= PHY_STAT_100FDX;
-			printk("100BaseT Full Duplex\n");
-			break;
-		}
-	}
-
-	fep->phy_status = s;
-
-}
-
-static void mii_dm9161_wait(uint mii_reg, struct net_device *dev)
-{
-	int timeout = HZ;
-
-	/* Davicom takes a bit to come up after a reset,
-	 * so wait here for a bit */
-	schedule_timeout_uninterruptible(timeout);
-}
-
-static phy_info_t phy_info_dm9161 = {
-        0x00181b88,
-        "Davicom DM9161E",
-        (const phy_cmd_t[]) { /* config */
-                { mk_mii_write(MII_BMCR, MIIM_DM9161_CR_STOP), NULL},
-                /* Do not bypass the scrambler/descrambler */
-                { mk_mii_write(MIIM_DM9161_SCR, MIIM_DM9161_SCR_INIT), NULL},
-		/* Configure 10BTCSR register */
-		{ mk_mii_write(MIIM_DM9161_10BTCSR, MIIM_DM9161_10BTCSR_INIT),NULL},
-                /* Configure some basic stuff */
-                { mk_mii_write(MII_BMCR, 0x1000), NULL},
-		{ mk_mii_read(MII_BMCR), mii_parse_cr },
-		{ mk_mii_read(MII_ADVERTISE), mii_parse_anar },
-		{ mk_mii_end,}
-        },
-       (const phy_cmd_t[]) { /* startup */
-                /* Restart Auto Negotiation */
-                { mk_mii_write(MII_BMCR, MIIM_DM9161_CR_RSTAN), NULL},
-                /* Status is read once to clear old link state */
-                { mk_mii_read(MII_BMSR), mii_dm9161_wait},
-                /* Auto-negotiate */
-                { mk_mii_read(MII_BMSR), mii_parse_dm9161_sr},
-                /* Read the status */
-                { mk_mii_read(MIIM_DM9161_SCSR), mii_parse_dm9161_scsr},
-                /* Clear any pending interrupts */
-                { mk_mii_read(MIIM_DM9161_INTR), NULL},
-                /* Enable Interrupts */
-                { mk_mii_write(MIIM_DM9161_INTR, MIIM_DM9161_INTR_INIT), NULL},
-                { mk_mii_end,}
-        },
-       (const phy_cmd_t[]) { /* ack_int */
-                { mk_mii_read(MIIM_DM9161_INTR), NULL},
-#if 0
-		{ mk_mii_read(MII_BMSR), NULL},
-		{ mk_mii_read(MII_BMSR), mii_parse_dm9161_sr},
-		{ mk_mii_read(MIIM_DM9161_SCSR), mii_parse_dm9161_scsr},
-#endif
-                { mk_mii_end,}
-        },
-        (const phy_cmd_t[]) { /* shutdown */
-	        { mk_mii_read(MIIM_DM9161_INTR),NULL},
-                { mk_mii_write(MIIM_DM9161_INTR, MIIM_DM9161_INTR_STOP), NULL},
-	        { mk_mii_end,}
-	},
-};
-#endif /* CONFIG_FCC_DM9161 */
-
-static phy_info_t *phy_info[] = {
-
-#ifdef CONFIG_FCC_LXT970
-	&phy_info_lxt970,
-#endif /* CONFIG_FEC_LXT970 */
-
-#ifdef CONFIG_FCC_LXT971
-	&phy_info_lxt971,
-#endif /* CONFIG_FEC_LXT971 */
-
-#ifdef CONFIG_FCC_QS6612
-	&phy_info_qs6612,
-#endif /* CONFIG_FEC_QS6612 */
-
-#ifdef CONFIG_FCC_DM9131
-	&phy_info_dm9131,
-#endif /* CONFIG_FEC_DM9131 */
-
-#ifdef CONFIG_FCC_DM9161
-	&phy_info_dm9161,
-#endif /* CONFIG_FCC_DM9161 */
-
-#ifdef CONFIG_FCC_GENERIC_PHY
-	/* Generic PHY support.  This must be the last PHY in the table.
-	 * It will be used to support any PHY that doesn't match a previous
-	 * entry in the table.
-	 */
-	&phy_info_generic,
-#endif /* CONFIG_FCC_GENERIC_PHY */
-
-	NULL
-};
-
-static void mii_display_status(struct work_struct *work)
-{
-	volatile struct fcc_enet_private *fep =
-		container_of(work, struct fcc_enet_private, phy_relink);
-	struct net_device *dev = fep->dev;
-	uint s = fep->phy_status;
-
-	if (!fep->link && !fep->old_link) {
-		/* Link is still down - don't print anything */
-		return;
-	}
-
-	printk("%s: status: ", dev->name);
-
-	if (!fep->link) {
-		printk("link down");
-	} else {
-		printk("link up");
-
-		switch(s & PHY_STAT_SPMASK) {
-		case PHY_STAT_100FDX: printk(", 100 Mbps Full Duplex"); break;
-		case PHY_STAT_100HDX: printk(", 100 Mbps Half Duplex"); break;
-		case PHY_STAT_10FDX:  printk(", 10 Mbps Full Duplex");  break;
-		case PHY_STAT_10HDX:  printk(", 10 Mbps Half Duplex");  break;
-		default:
-			printk(", Unknown speed/duplex");
-		}
-
-		if (s & PHY_STAT_ANC)
-			printk(", auto-negotiation complete");
-	}
-
-	if (s & PHY_STAT_FAULT)
-		printk(", remote fault");
-
-	printk(".\n");
-}
-
-static void mii_display_config(struct work_struct *work)
-{
-	volatile struct fcc_enet_private *fep =
-		container_of(work, struct fcc_enet_private,
-			     phy_display_config);
-	struct net_device *dev = fep->dev;
-	uint s = fep->phy_status;
-
-	printk("%s: config: auto-negotiation ", dev->name);
-
-	if (s & PHY_CONF_ANE)
-		printk("on");
-	else
-		printk("off");
-
-	if (s & PHY_CONF_100FDX)
-		printk(", 100FDX");
-	if (s & PHY_CONF_100HDX)
-		printk(", 100HDX");
-	if (s & PHY_CONF_10FDX)
-		printk(", 10FDX");
-	if (s & PHY_CONF_10HDX)
-		printk(", 10HDX");
-	if (!(s & PHY_CONF_SPMASK))
-		printk(", No speed/duplex selected?");
-
-	if (s & PHY_CONF_LOOP)
-		printk(", loopback enabled");
-
-	printk(".\n");
-
-	fep->sequence_done = 1;
-}
-
-static void mii_relink(struct net_device *dev)
-{
-	struct fcc_enet_private *fep = dev->priv;
-	int duplex = 0;
-
-	fep->old_link = fep->link;
-	fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0;
-
-#ifdef MDIO_DEBUG
-	printk("  mii_relink:  link=%d\n", fep->link);
-#endif
-
-	if (fep->link) {
-		if (fep->phy_status
-		    & (PHY_STAT_100FDX | PHY_STAT_10FDX))
-			duplex = 1;
-		fcc_restart(dev, duplex);
-#ifdef MDIO_DEBUG
-		printk("  mii_relink:  duplex=%d\n", duplex);
-#endif
-	}
-}
-
-static void mii_queue_relink(uint mii_reg, struct net_device *dev)
-{
-	struct fcc_enet_private *fep = dev->priv;
-
-	mii_relink(dev);
-
-	schedule_work(&fep->phy_relink);
-}
-
-static void mii_queue_config(uint mii_reg, struct net_device *dev)
-{
-	struct fcc_enet_private *fep = dev->priv;
-
-	schedule_work(&fep->phy_display_config);
-}
-
-phy_cmd_t phy_cmd_relink[] = { { mk_mii_read(MII_BMCR), mii_queue_relink },
-			       { mk_mii_end, } };
-phy_cmd_t phy_cmd_config[] = { { mk_mii_read(MII_BMCR), mii_queue_config },
-			       { mk_mii_end, } };
-
-
-/* Read remainder of PHY ID.
-*/
-static void
-mii_discover_phy3(uint mii_reg, struct net_device *dev)
-{
-	struct fcc_enet_private *fep;
-	int	i;
-
-	fep = dev->priv;
-	printk("mii_reg: %08x\n", mii_reg);
-	fep->phy_id |= (mii_reg & 0xffff);
-
-	for(i = 0; phy_info[i]; i++)
-		if((phy_info[i]->id == (fep->phy_id >> 4)) || !phy_info[i]->id)
-			break;
-
-	if(!phy_info[i])
-		panic("%s: PHY id 0x%08x is not supported!\n",
-		      dev->name, fep->phy_id);
-
-	fep->phy = phy_info[i];
-	fep->phy_id_done = 1;
-
-	printk("%s: Phy @ 0x%x, type %s (0x%08x)\n",
-		dev->name, fep->phy_addr, fep->phy->name, fep->phy_id);
-}
-
-/* Scan all of the MII PHY addresses looking for someone to respond
- * with a valid ID.  This usually happens quickly.
- */
-static void
-mii_discover_phy(uint mii_reg, struct net_device *dev)
-{
-	struct fcc_enet_private *fep;
-	uint	phytype;
-
-	fep = dev->priv;
-
-	if ((phytype = (mii_reg & 0xffff)) != 0xffff) {
-
-		/* Got first part of ID, now get remainder. */
-		fep->phy_id = phytype << 16;
-		mii_queue(dev, mk_mii_read(MII_PHYSID2), mii_discover_phy3);
-	} else {
-		fep->phy_addr++;
-		if (fep->phy_addr < 32) {
-			mii_queue(dev, mk_mii_read(MII_PHYSID1),
-							mii_discover_phy);
-		} else {
-			printk("fec: No PHY device found.\n");
-		}
-	}
-}
-#endif	/* CONFIG_USE_MDIO */
-
-#ifdef PHY_INTERRUPT
-/* This interrupt occurs when the PHY detects a link change. */
-static irqreturn_t
-mii_link_interrupt(int irq, void * dev_id)
-{
-	struct	net_device *dev = dev_id;
-	struct fcc_enet_private *fep = dev->priv;
-	fcc_info_t *fip = fep->fip;
-
-	if (fep->phy) {
-		/* We don't want to be interrupted by an FCC
-		 * interrupt here.
-		 */
-		disable_irq_nosync(fip->fc_interrupt);
-
-		mii_do_cmd(dev, fep->phy->ack_int);
-		/* restart and display status */
-		mii_do_cmd(dev, phy_cmd_relink);
-
-		enable_irq(fip->fc_interrupt);
-	}
-	return IRQ_HANDLED;
-}
-#endif	/* ifdef PHY_INTERRUPT */
-
-#if 0 /* This should be fixed someday */
-/* Set or clear the multicast filter for this adaptor.
- * Skeleton taken from sunlance driver.
- * The CPM Ethernet implementation allows Multicast as well as individual
- * MAC address filtering.  Some of the drivers check to make sure it is
- * a group multicast address, and discard those that are not.  I guess I
- * will do the same for now, but just remove the test if you want
- * individual filtering as well (do the upper net layers want or support
- * this kind of feature?).
- */
-static void
-set_multicast_list(struct net_device *dev)
-{
-	struct	fcc_enet_private *cep;
-	struct	dev_mc_list *dmi;
-	u_char	*mcptr, *tdptr;
-	volatile fcc_enet_t *ep;
-	int	i, j;
-
-	cep = (struct fcc_enet_private *)dev->priv;
-
-return;
-	/* Get pointer to FCC area in parameter RAM.
-	*/
-	ep = (fcc_enet_t *)dev->base_addr;
-
-	if (dev->flags&IFF_PROMISC) {
-	
-		/* Log any net taps. */
-		printk("%s: Promiscuous mode enabled.\n", dev->name);
-		cep->fccp->fcc_fpsmr |= FCC_PSMR_PRO;
-	} else {
-
-		cep->fccp->fcc_fpsmr &= ~FCC_PSMR_PRO;
-
-		if (dev->flags & IFF_ALLMULTI) {
-			/* Catch all multicast addresses, so set the
-			 * filter to all 1's.
-			 */
-			ep->fen_gaddrh = 0xffffffff;
-			ep->fen_gaddrl = 0xffffffff;
-		}
-		else {
-			/* Clear filter and add the addresses in the list.
-			*/
-			ep->fen_gaddrh = 0;
-			ep->fen_gaddrl = 0;
-
-			dmi = dev->mc_list;
-
-			for (i=0; i<dev->mc_count; i++, dmi = dmi->next) {
-
-				/* Only support group multicast for now.
-				*/
-				if (!(dmi->dmi_addr[0] & 1))
-					continue;
-
-				/* The address in dmi_addr is LSB first,
-				 * and taddr is MSB first.  We have to
-				 * copy bytes MSB first from dmi_addr.
-				 */
-				mcptr = (u_char *)dmi->dmi_addr + 5;
-				tdptr = (u_char *)&ep->fen_taddrh;
-				for (j=0; j<6; j++)
-					*tdptr++ = *mcptr--;
-
-				/* Ask CPM to run CRC and set bit in
-				 * filter mask.
-				 */
-				cpmp->cp_cpcr = mk_cr_cmd(cep->fip->fc_cpmpage,
-						cep->fip->fc_cpmblock, 0x0c,
-						CPM_CR_SET_GADDR) | CPM_CR_FLG;
-				udelay(10);
-				while (cpmp->cp_cpcr & CPM_CR_FLG);
-			}
-		}
-	}
-}
-#endif /* if 0 */
-
-
-/* Set the individual MAC address.
- */
-int fcc_enet_set_mac_address(struct net_device *dev, void *p)
-{
-	struct sockaddr *addr= (struct sockaddr *) p;
-	struct fcc_enet_private *cep;
-	volatile fcc_enet_t *ep;
-	unsigned char *eap;
-	int i;
-
-	cep = (struct fcc_enet_private *)(dev->priv);
-	ep = cep->ep;
-
-        if (netif_running(dev))
-                return -EBUSY;
-
-        memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-
-	eap = (unsigned char *) &(ep->fen_paddrh);
-	for (i=5; i>=0; i--)
-		*eap++ = addr->sa_data[i];
-
-        return 0;
-}
-
-
-/* Initialize the CPM Ethernet on FCC.
- */
-static int __init fec_enet_init(void)
-{
-	struct net_device *dev;
-	struct fcc_enet_private *cep;
-	fcc_info_t	*fip;
-	int	i, np, err;
-	volatile	cpm2_map_t		*immap;
-	volatile	iop_cpm2_t	*io;
-
-	immap = (cpm2_map_t *)CPM_MAP_ADDR;	/* and to internal registers */
-	io = &immap->im_ioport;
-
-	np = sizeof(fcc_ports) / sizeof(fcc_info_t);
-	fip = fcc_ports;
-
-	while (np-- > 0) {
-		/* Create an Ethernet device instance.
-		*/
-		dev = alloc_etherdev(sizeof(*cep));
-		if (!dev)
-			return -ENOMEM;
-
-		cep = dev->priv;
-		spin_lock_init(&cep->lock);
-		cep->fip = fip;
-
-		init_fcc_shutdown(fip, cep, immap);
-		init_fcc_ioports(fip, io, immap);
-		init_fcc_param(fip, dev, immap);
-
-		dev->base_addr = (unsigned long)(cep->ep);
-
-		/* The CPM Ethernet specific entries in the device
-		 * structure.
-		 */
-		dev->open = fcc_enet_open;
-		dev->hard_start_xmit = fcc_enet_start_xmit;
-		dev->tx_timeout = fcc_enet_timeout;
-		dev->watchdog_timeo = TX_TIMEOUT;
-		dev->stop = fcc_enet_close;
-		dev->get_stats = fcc_enet_get_stats;
-		/* dev->set_multicast_list = set_multicast_list; */
-		dev->set_mac_address = fcc_enet_set_mac_address;
-
-		init_fcc_startup(fip, dev);
-
-		err = register_netdev(dev);
-		if (err) {
-			free_netdev(dev);
-			return err;
-		}
-
-		printk("%s: FCC ENET Version 0.3, ", dev->name);
-		for (i=0; i<5; i++)
-			printk("%02x:", dev->dev_addr[i]);
-		printk("%02x\n", dev->dev_addr[5]);
-
-#ifdef	CONFIG_USE_MDIO
-		/* Queue up command to detect the PHY and initialize the
-	 	* remainder of the interface.
-	 	*/
-		cep->phy_id_done = 0;
-		cep->phy_addr = fip->fc_phyaddr;
-		mii_queue(dev, mk_mii_read(MII_PHYSID1), mii_discover_phy);
-		INIT_WORK(&cep->phy_relink, mii_display_status);
-		INIT_WORK(&cep->phy_display_config, mii_display_config);
-		cep->dev = dev;
-#endif	/* CONFIG_USE_MDIO */
-
-		fip++;
-	}
-
-	return 0;
-}
-module_init(fec_enet_init);
-
-/* Make sure the device is shut down during initialization.
-*/
-static void __init
-init_fcc_shutdown(fcc_info_t *fip, struct fcc_enet_private *cep,
-						volatile cpm2_map_t *immap)
-{
-	volatile	fcc_enet_t	*ep;
-	volatile	fcc_t		*fccp;
-
-	/* Get pointer to FCC area in parameter RAM.
-	*/
-	ep = (fcc_enet_t *)(&immap->im_dprambase[fip->fc_proff]);
-
-	/* And another to the FCC register area.
-	*/
-	fccp = (volatile fcc_t *)(&immap->im_fcc[fip->fc_fccnum]);
-	cep->fccp = fccp;		/* Keep the pointers handy */
-	cep->ep = ep;
-
-	/* Disable receive and transmit in case someone left it running.
-	*/
-	fccp->fcc_gfmr &= ~(FCC_GFMR_ENR | FCC_GFMR_ENT);
-}
-
-/* Initialize the I/O pins for the FCC Ethernet.
-*/
-static void __init
-init_fcc_ioports(fcc_info_t *fip, volatile iop_cpm2_t *io,
-						volatile cpm2_map_t *immap)
-{
-
-	/* FCC1 pins are on port A/C.  FCC2/3 are port B/C.
-	*/
-	if (fip->fc_proff == PROFF_FCC1) {
-		/* Configure port A and C pins for FCC1 Ethernet.
-		 */
-		io->iop_pdira &= ~PA1_DIRA_BOUT;
-		io->iop_pdira |= PA1_DIRA_BIN;
-		io->iop_psora &= ~PA1_PSORA_BOUT;
-		io->iop_psora |= PA1_PSORA_BIN;
-		io->iop_ppara |= (PA1_DIRA_BOUT | PA1_DIRA_BIN);
-	}
-	if (fip->fc_proff == PROFF_FCC2) {
-		/* Configure port B and C pins for FCC Ethernet.
-		 */
-		io->iop_pdirb &= ~PB2_DIRB_BOUT;
-		io->iop_pdirb |= PB2_DIRB_BIN;
-		io->iop_psorb &= ~PB2_PSORB_BOUT;
-		io->iop_psorb |= PB2_PSORB_BIN;
-		io->iop_pparb |= (PB2_DIRB_BOUT | PB2_DIRB_BIN);
-	}
-	if (fip->fc_proff == PROFF_FCC3) {
-		/* Configure port B and C pins for FCC Ethernet.
-		 */
-		io->iop_pdirb &= ~PB3_DIRB_BOUT;
-		io->iop_pdirb |= PB3_DIRB_BIN;
-		io->iop_psorb &= ~PB3_PSORB_BOUT;
-		io->iop_psorb |= PB3_PSORB_BIN;
-		io->iop_pparb |= (PB3_DIRB_BOUT | PB3_DIRB_BIN);
-
-		io->iop_pdirc &= ~PC3_DIRC_BOUT;
-		io->iop_pdirc |= PC3_DIRC_BIN;
-		io->iop_psorc &= ~PC3_PSORC_BOUT;
-		io->iop_psorc |= PC3_PSORC_BIN;
-		io->iop_pparc |= (PC3_DIRC_BOUT | PC3_DIRC_BIN);
-
-	}
-
-	/* Port C has clocks......
-	*/
-	io->iop_psorc &= ~(fip->fc_trxclocks);
-	io->iop_pdirc &= ~(fip->fc_trxclocks);
-	io->iop_pparc |= fip->fc_trxclocks;
-
-#ifdef	CONFIG_USE_MDIO
-	/* ....and the MII serial clock/data.
-	*/
-	io->iop_pdatc |= (fip->fc_mdio | fip->fc_mdck);
-	io->iop_podrc &= ~(fip->fc_mdio | fip->fc_mdck);
-	io->iop_pdirc |= (fip->fc_mdio | fip->fc_mdck);
-	io->iop_pparc &= ~(fip->fc_mdio | fip->fc_mdck);
-#endif	/* CONFIG_USE_MDIO */
-
-	/* Configure Serial Interface clock routing.
-	 * First, clear all FCC bits to zero,
-	 * then set the ones we want.
-	 */
-	immap->im_cpmux.cmx_fcr &= ~(fip->fc_clockmask);
-	immap->im_cpmux.cmx_fcr |= fip->fc_clockroute;
-}
-
-static void __init
-init_fcc_param(fcc_info_t *fip, struct net_device *dev,
-						volatile cpm2_map_t *immap)
-{
-	unsigned char	*eap;
-	unsigned long	mem_addr;
-	bd_t		*bd;
-	int		i, j;
-	struct		fcc_enet_private *cep;
-	volatile	fcc_enet_t	*ep;
-	volatile	cbd_t		*bdp;
-	volatile	cpm_cpm2_t	*cp;
-
-	cep = (struct fcc_enet_private *)(dev->priv);
-	ep = cep->ep;
-	cp = cpmp;
-
-	bd = (bd_t *)__res;
-
-	/* Zero the whole thing.....I must have missed some individually.
-	 * It works when I do this.
-	 */
-	memset((char *)ep, 0, sizeof(fcc_enet_t));
-
-	/* Allocate space for the buffer descriptors from regular memory.
-	 * Initialize base addresses for the buffer descriptors.
-	 */
-	cep->rx_bd_base = kmalloc(sizeof(cbd_t) * RX_RING_SIZE,
-			GFP_KERNEL | GFP_DMA);
-	ep->fen_genfcc.fcc_rbase = __pa(cep->rx_bd_base);
-	cep->tx_bd_base = kmalloc(sizeof(cbd_t) * TX_RING_SIZE,
-			GFP_KERNEL | GFP_DMA);
-	ep->fen_genfcc.fcc_tbase = __pa(cep->tx_bd_base);
-
-	cep->dirty_tx = cep->cur_tx = cep->tx_bd_base;
-	cep->cur_rx = cep->rx_bd_base;
-
-	ep->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
-	ep->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
-
-	/* Set maximum bytes per receive buffer.
-	 * It must be a multiple of 32.
-	 */
-	ep->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE;
-
-	/* Allocate space in the reserved FCC area of DPRAM for the
-	 * internal buffers.  No one uses this space (yet), so we
-	 * can do this.  Later, we will add resource management for
-	 * this area.
-	 */
-	mem_addr = CPM_FCC_SPECIAL_BASE + (fip->fc_fccnum * 128);
-	ep->fen_genfcc.fcc_riptr = mem_addr;
-	ep->fen_genfcc.fcc_tiptr = mem_addr+32;
-	ep->fen_padptr = mem_addr+64;
-	memset((char *)(&(immap->im_dprambase[(mem_addr+64)])), 0x88, 32);
-
-	ep->fen_genfcc.fcc_rbptr = 0;
-	ep->fen_genfcc.fcc_tbptr = 0;
-	ep->fen_genfcc.fcc_rcrc = 0;
-	ep->fen_genfcc.fcc_tcrc = 0;
-	ep->fen_genfcc.fcc_res1 = 0;
-	ep->fen_genfcc.fcc_res2 = 0;
-
-	ep->fen_camptr = 0;	/* CAM isn't used in this driver */
-
-	/* Set CRC preset and mask.
-	*/
-	ep->fen_cmask = 0xdebb20e3;
-	ep->fen_cpres = 0xffffffff;
-
-	ep->fen_crcec = 0;	/* CRC Error counter */
-	ep->fen_alec = 0;	/* alignment error counter */
-	ep->fen_disfc = 0;	/* discard frame counter */
-	ep->fen_retlim = 15;	/* Retry limit threshold */
-	ep->fen_pper = 0;	/* Normal persistence */
-
-	/* Clear hash filter tables.
-	*/
-	ep->fen_gaddrh = 0;
-	ep->fen_gaddrl = 0;
-	ep->fen_iaddrh = 0;
-	ep->fen_iaddrl = 0;
-
-	/* Clear the Out-of-sequence TxBD.
-	*/
-	ep->fen_tfcstat = 0;
-	ep->fen_tfclen = 0;
-	ep->fen_tfcptr = 0;
-
-	ep->fen_mflr = PKT_MAXBUF_SIZE;   /* maximum frame length register */
-	ep->fen_minflr = PKT_MINBUF_SIZE;  /* minimum frame length register */
-
-	/* Set Ethernet station address.
-	 *
-	 * This is supplied in the board information structure, so we
-	 * copy that into the controller.
-	 * So, far we have only been given one Ethernet address. We make
-	 * it unique by setting a few bits in the upper byte of the
-	 * non-static part of the address.
-	 */
-	eap = (unsigned char *)&(ep->fen_paddrh);
-	for (i=5; i>=0; i--) {
-
-/*
- * The EP8260 only uses FCC3, so we can safely give it the real
- * MAC address.
- */
-#ifdef CONFIG_SBC82xx
-		if (i == 5) {
-			/* bd->bi_enetaddr holds the SCC0 address; the FCC
-			   devices count up from there */
-			dev->dev_addr[i] = bd->bi_enetaddr[i] & ~3;
-			dev->dev_addr[i] += 1 + fip->fc_fccnum;
-			*eap++ = dev->dev_addr[i];
-		}
-#else
-#ifndef CONFIG_RPX8260
-		if (i == 3) {
-			dev->dev_addr[i] = bd->bi_enetaddr[i];
-			dev->dev_addr[i] |= (1 << (7 - fip->fc_fccnum));
-			*eap++ = dev->dev_addr[i];
-		} else
-#endif
-		{
-			*eap++ = dev->dev_addr[i] = bd->bi_enetaddr[i];
-		}
-#endif
-	}
-
-	ep->fen_taddrh = 0;
-	ep->fen_taddrm = 0;
-	ep->fen_taddrl = 0;
-
-	ep->fen_maxd1 = PKT_MAXDMA_SIZE;	/* maximum DMA1 length */
-	ep->fen_maxd2 = PKT_MAXDMA_SIZE;	/* maximum DMA2 length */
-
-	/* Clear stat counters, in case we ever enable RMON.
-	*/
-	ep->fen_octc = 0;
-	ep->fen_colc = 0;
-	ep->fen_broc = 0;
-	ep->fen_mulc = 0;
-	ep->fen_uspc = 0;
-	ep->fen_frgc = 0;
-	ep->fen_ospc = 0;
-	ep->fen_jbrc = 0;
-	ep->fen_p64c = 0;
-	ep->fen_p65c = 0;
-	ep->fen_p128c = 0;
-	ep->fen_p256c = 0;
-	ep->fen_p512c = 0;
-	ep->fen_p1024c = 0;
-
-	ep->fen_rfthr = 0;	/* Suggested by manual */
-	ep->fen_rfcnt = 0;
-	ep->fen_cftype = 0;
-
-	/* Now allocate the host memory pages and initialize the
-	 * buffer descriptors.
-	 */
-	bdp = cep->tx_bd_base;
-	for (i=0; i<TX_RING_SIZE; i++) {
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		bdp->cbd_sc = 0;
-		bdp->cbd_datlen = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	bdp = cep->rx_bd_base;
-	for (i=0; i<FCC_ENET_RX_PAGES; i++) {
-
-		/* Allocate a page.
-		*/
-		mem_addr = __get_free_page(GFP_KERNEL);
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		for (j=0; j<FCC_ENET_RX_FRPPG; j++) {
-			bdp->cbd_sc = BD_ENET_RX_EMPTY | BD_ENET_RX_INTR;
-			bdp->cbd_datlen = 0;
-			bdp->cbd_bufaddr = __pa(mem_addr);
-			mem_addr += FCC_ENET_RX_FRSIZE;
-			bdp++;
-		}
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* Let's re-initialize the channel now.  We have to do it later
-	 * than the manual describes because we have just now finished
-	 * the BD initialization.
-	 */
-	cp->cp_cpcr = mk_cr_cmd(fip->fc_cpmpage, fip->fc_cpmblock, 0x0c,
-			CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	cep->skb_cur = cep->skb_dirty = 0;
-}
-
-/* Let 'er rip.
-*/
-static void __init
-init_fcc_startup(fcc_info_t *fip, struct net_device *dev)
-{
-	volatile fcc_t	*fccp;
-	struct fcc_enet_private *cep;
-
-	cep = (struct fcc_enet_private *)(dev->priv);
-	fccp = cep->fccp;
-
-#ifdef CONFIG_RPX8260
-#ifdef PHY_INTERRUPT
-	/* Route PHY interrupt to IRQ.  The following code only works for
-	 * IRQ1 - IRQ7.  It does not work for Port C interrupts.
-	 */
-	*((volatile u_char *) (RPX_CSR_ADDR + 13)) &= ~BCSR13_FETH_IRQMASK;
-	*((volatile u_char *) (RPX_CSR_ADDR + 13)) |=
-		((PHY_INTERRUPT - SIU_INT_IRQ1 + 1) << 4);
-#endif
-	/* Initialize MDIO pins. */
-	*((volatile u_char *) (RPX_CSR_ADDR + 4)) &= ~BCSR4_MII_MDC;
-	*((volatile u_char *) (RPX_CSR_ADDR + 4)) |=
-		BCSR4_MII_READ | BCSR4_MII_MDIO;
-	/* Enable external LXT971 PHY. */
-	*((volatile u_char *) (RPX_CSR_ADDR + 4)) |= BCSR4_EN_PHY;
-	udelay(1000);
-	*((volatile u_char *) (RPX_CSR_ADDR+ 4)) |= BCSR4_EN_MII;
-	udelay(1000);
-#endif	/* ifdef CONFIG_RPX8260 */
-
-	fccp->fcc_fcce = 0xffff;	/* Clear any pending events */
-
-	/* Leave FCC interrupts masked for now.  Will be unmasked by
-	 * fcc_restart().
-	 */
-	fccp->fcc_fccm = 0;
-
-	/* Install our interrupt handler.
-	*/
-	if (request_irq(fip->fc_interrupt, fcc_enet_interrupt, 0, "fenet",
-				dev) < 0)
-		printk("Can't get FCC IRQ %d\n", fip->fc_interrupt);
-
-#ifdef	PHY_INTERRUPT
-	/* Make IRQn edge triggered.  This does not work if PHY_INTERRUPT is
-	 * on Port C.
-	 */
-	((volatile cpm2_map_t *) CPM_MAP_ADDR)->im_intctl.ic_siexr |=
-		(1 << (14 - (PHY_INTERRUPT - SIU_INT_IRQ1)));
-
-	if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0,
-							"mii", dev) < 0)
-		printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT);
-#endif	/* PHY_INTERRUPT */
-
-	/* Set GFMR to enable Ethernet operating mode.
-	 */
-	fccp->fcc_gfmr = (FCC_GFMR_TCI | FCC_GFMR_MODE_ENET);
-
-	/* Set sync/delimiters.
-	*/
-	fccp->fcc_fdsr = 0xd555;
-
-	/* Set protocol specific processing mode for Ethernet.
-	 * This has to be adjusted for Full Duplex operation after we can
-	 * determine how to detect that.
-	 */
-	fccp->fcc_fpsmr = FCC_PSMR_ENCRC;
-
-#ifdef CONFIG_PQ2ADS
-	/* Enable the PHY. */
-	*(volatile uint *)(BCSR_ADDR + 4) &= ~BCSR1_FETHIEN;
-	*(volatile uint *)(BCSR_ADDR + 4) |=  BCSR1_FETH_RST;
-#endif
-#if defined(CONFIG_PQ2ADS) || defined(CONFIG_PQ2FADS)
-	/* Enable the 2nd PHY. */
-	*(volatile uint *)(BCSR_ADDR + 12) &= ~BCSR3_FETHIEN2;
-	*(volatile uint *)(BCSR_ADDR + 12) |=  BCSR3_FETH2_RST;
-#endif
-
-#if defined(CONFIG_USE_MDIO) || defined(CONFIG_TQM8260)
-	/* start in full duplex mode, and negotiate speed
-	 */
-	fcc_restart (dev, 1);
-#else
-	/* start in half duplex mode
-	 */
-	fcc_restart (dev, 0);
-#endif
-}
-
-#ifdef	CONFIG_USE_MDIO
-/* MII command/status interface.
- * I'm not going to describe all of the details.  You can find the
- * protocol definition in many other places, including the data sheet
- * of most PHY parts.
- * I wonder what "they" were thinking (maybe weren't) when they leave
- * the I2C in the CPM but I have to toggle these bits......
- */
-#ifdef CONFIG_RPX8260
-	/* The EP8260 has the MDIO pins in a BCSR instead of on Port C
-	 * like most other boards.
-	 */
-#define MDIO_ADDR ((volatile u_char *)(RPX_CSR_ADDR + 4))
-#define MAKE_MDIO_OUTPUT *MDIO_ADDR &= ~BCSR4_MII_READ
-#define MAKE_MDIO_INPUT  *MDIO_ADDR |=  BCSR4_MII_READ | BCSR4_MII_MDIO
-#define OUT_MDIO(bit)				\
-	if (bit)				\
-		*MDIO_ADDR |=  BCSR4_MII_MDIO;	\
-	else					\
-		*MDIO_ADDR &= ~BCSR4_MII_MDIO;
-#define IN_MDIO (*MDIO_ADDR & BCSR4_MII_MDIO)
-#define OUT_MDC(bit)				\
-	if (bit)				\
-		*MDIO_ADDR |=  BCSR4_MII_MDC;	\
-	else					\
-		*MDIO_ADDR &= ~BCSR4_MII_MDC;
-#else	/* ifdef CONFIG_RPX8260 */
-	/* This is for the usual case where the MDIO pins are on Port C.
-	 */
-#define MDIO_ADDR (((volatile cpm2_map_t *)CPM_MAP_ADDR)->im_ioport)
-#define MAKE_MDIO_OUTPUT MDIO_ADDR.iop_pdirc |= fip->fc_mdio
-#define MAKE_MDIO_INPUT MDIO_ADDR.iop_pdirc &= ~fip->fc_mdio
-#define OUT_MDIO(bit)				\
-	if (bit)				\
-		MDIO_ADDR.iop_pdatc |= fip->fc_mdio;	\
-	else					\
-		MDIO_ADDR.iop_pdatc &= ~fip->fc_mdio;
-#define IN_MDIO ((MDIO_ADDR.iop_pdatc) & fip->fc_mdio)
-#define OUT_MDC(bit)				\
-	if (bit)				\
-		MDIO_ADDR.iop_pdatc |= fip->fc_mdck;	\
-	else					\
-		MDIO_ADDR.iop_pdatc &= ~fip->fc_mdck;
-#endif	/* ifdef CONFIG_RPX8260 */
-
-static uint
-mii_send_receive(fcc_info_t *fip, uint cmd)
-{
-	uint		retval;
-	int		read_op, i, off;
-	const int	us = 1;
-
-	read_op = ((cmd & 0xf0000000) == 0x60000000);
-
-	/* Write preamble
-	 */
-	OUT_MDIO(1);
-	MAKE_MDIO_OUTPUT;
-	OUT_MDIO(1);
-	for (i = 0; i < 32; i++)
-	{
-		udelay(us);
-		OUT_MDC(1);
-		udelay(us);
-		OUT_MDC(0);
-	}
-
-	/* Write data
-	 */
-	for (i = 0, off = 31; i < (read_op ? 14 : 32); i++, --off)
-	{
-		OUT_MDIO((cmd >> off) & 0x00000001);
-		udelay(us);
-		OUT_MDC(1);
-		udelay(us);
-		OUT_MDC(0);
-	}
-
-	retval = cmd;
-
-	if (read_op)
-	{
-		retval >>= 16;
-
-		MAKE_MDIO_INPUT;
-		udelay(us);
-		OUT_MDC(1);
-		udelay(us);
-		OUT_MDC(0);
-
-		for (i = 0; i < 16; i++)
-		{
-			udelay(us);
-			OUT_MDC(1);
-			udelay(us);
-			retval <<= 1;
-			if (IN_MDIO)
-				retval++;
-			OUT_MDC(0);
-		}
-	}
-
-	MAKE_MDIO_INPUT;
-	udelay(us);
-	OUT_MDC(1);
-	udelay(us);
-	OUT_MDC(0);
-
-	return retval;
-}
-#endif	/* CONFIG_USE_MDIO */
-
-static void
-fcc_stop(struct net_device *dev)
-{
-	struct fcc_enet_private	*fep= (struct fcc_enet_private *)(dev->priv);
-	volatile fcc_t	*fccp = fep->fccp;
-	fcc_info_t *fip = fep->fip;
-	volatile fcc_enet_t *ep = fep->ep;
-	volatile cpm_cpm2_t *cp = cpmp;
-	volatile cbd_t *bdp;
-	int i;
-
-	if ((fccp->fcc_gfmr & (FCC_GFMR_ENR | FCC_GFMR_ENT)) == 0)
-		return;	/* already down */
-
-	fccp->fcc_fccm = 0;
-
-	/* issue the graceful stop tx command */
-	while (cp->cp_cpcr & CPM_CR_FLG);
-	cp->cp_cpcr = mk_cr_cmd(fip->fc_cpmpage, fip->fc_cpmblock,
-				0x0c, CPM_CR_GRA_STOP_TX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* Disable transmit/receive */
-	fccp->fcc_gfmr &= ~(FCC_GFMR_ENR | FCC_GFMR_ENT);
-
-	/* issue the restart tx command */
-	fccp->fcc_fcce = FCC_ENET_GRA;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-	cp->cp_cpcr = mk_cr_cmd(fip->fc_cpmpage, fip->fc_cpmblock,
-				0x0c, CPM_CR_RESTART_TX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* free tx buffers */
-	fep->skb_cur = fep->skb_dirty = 0;
-	for (i=0; i<=TX_RING_MOD_MASK; i++) {
-		if (fep->tx_skbuff[i] != NULL) {
-			dev_kfree_skb(fep->tx_skbuff[i]);
-			fep->tx_skbuff[i] = NULL;
-		}
-	}
-	fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
-	fep->tx_free = TX_RING_SIZE;
-	ep->fen_genfcc.fcc_tbptr = ep->fen_genfcc.fcc_tbase;
-
-	/* Initialize the tx buffer descriptors. */
-	bdp = fep->tx_bd_base;
-	for (i=0; i<TX_RING_SIZE; i++) {
-		bdp->cbd_sc = 0;
-		bdp->cbd_datlen = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-	/* Set the last buffer to wrap. */
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-}
-
-static void
-fcc_restart(struct net_device *dev, int duplex)
-{
-	struct fcc_enet_private	*fep = (struct fcc_enet_private *)(dev->priv);
-	volatile fcc_t	*fccp = fep->fccp;
-
-	/* stop any transmissions in progress */
-	fcc_stop(dev);
-
-	if (duplex)
-		fccp->fcc_fpsmr |= FCC_PSMR_FDE | FCC_PSMR_LPB;
-	else
-		fccp->fcc_fpsmr &= ~(FCC_PSMR_FDE | FCC_PSMR_LPB);
-
-	/* Enable interrupts for transmit error, complete frame
-	 * received, and any transmit buffer we have also set the
-	 * interrupt flag.
-	 */
-	fccp->fcc_fccm = (FCC_ENET_TXE | FCC_ENET_RXF | FCC_ENET_TXB);
-
-	/* Enable transmit/receive */
-	fccp->fcc_gfmr |= FCC_GFMR_ENR | FCC_GFMR_ENT;
-}
-
-static int
-fcc_enet_open(struct net_device *dev)
-{
-	struct fcc_enet_private *fep = dev->priv;
-
-#ifdef	CONFIG_USE_MDIO
-	fep->sequence_done = 0;
-	fep->link = 0;
-
-	if (fep->phy) {
-		fcc_restart(dev, 0);	/* always start in half-duplex */
-		mii_do_cmd(dev, fep->phy->ack_int);
-		mii_do_cmd(dev, fep->phy->config);
-		mii_do_cmd(dev, phy_cmd_config);  /* display configuration */
-		while(!fep->sequence_done)
-			schedule();
-
-		mii_do_cmd(dev, fep->phy->startup);
-		netif_start_queue(dev);
-		return 0;		/* Success */
-	}
-	return -ENODEV;		/* No PHY we understand */
-#else
-	fep->link = 1;
-	fcc_restart(dev, 0);	/* always start in half-duplex */
-	netif_start_queue(dev);
-	return 0;					/* Always succeed */
-#endif	/* CONFIG_USE_MDIO */
-}
-
diff --git a/arch/ppc/8xx_io/Kconfig b/arch/ppc/8xx_io/Kconfig
deleted file mode 100644
index c623e44f01ad..000000000000
--- a/arch/ppc/8xx_io/Kconfig
+++ /dev/null
@@ -1,134 +0,0 @@
-#
-# MPC8xx Communication options
-#
-
-menu "MPC8xx CPM Options"
-	depends on 8xx
-
-config SCC_ENET
-	bool "CPM SCC Ethernet"
-	depends on NET_ETHERNET
-	help
-	  Enable Ethernet support via the Motorola MPC8xx serial
-	  communications controller.
-
-choice
-	prompt "SCC used for Ethernet"
-	depends on SCC_ENET
-	default SCC1_ENET
-
-config SCC1_ENET
-	bool "SCC1"
-	help
-	  Use MPC8xx serial communications controller 1 to drive Ethernet
-	  (default).
-
-config SCC2_ENET
-	bool "SCC2"
-	help
-	  Use MPC8xx serial communications controller 2 to drive Ethernet.
-
-config SCC3_ENET
-	bool "SCC3"
-	help
-	  Use MPC8xx serial communications controller 3 to drive Ethernet.
-
-endchoice
-
-config FEC_ENET
-	bool "860T FEC Ethernet"
-	depends on NET_ETHERNET
-	help
-	  Enable Ethernet support via the Fast Ethernet Controller (FCC) on
-	  the Motorola MPC8260.
-
-config USE_MDIO
-	bool "Use MDIO for PHY configuration"
-	depends on FEC_ENET
-	help
-	  On some boards the hardware configuration of the ethernet PHY can be
-	  used without any software interaction over the MDIO interface, so
-	  all MII code can be omitted. Say N here if unsure or if you don't
-	  need link status reports.
-
-config  FEC_AM79C874
-	bool "Support AMD79C874 PHY"
-	depends on USE_MDIO
-
-config FEC_LXT970
-	bool "Support LXT970 PHY"
-	depends on USE_MDIO
-
-config FEC_LXT971
-	bool "Support LXT971 PHY"
-	depends on USE_MDIO
-	
-config FEC_QS6612
-	bool "Support QS6612 PHY"
-	depends on USE_MDIO
-	
-config ENET_BIG_BUFFERS
-	bool "Use Big CPM Ethernet Buffers"
-	depends on SCC_ENET || FEC_ENET
-	help
-	  Allocate large buffers for MPC8xx Ethernet. Increases throughput
-	  and decreases the likelihood of dropped packets, but costs memory.
-
-# This doesn't really belong here, but it is convenient to ask
-# 8xx specific questions.
-comment "Generic MPC8xx Options"
-
-config 8xx_COPYBACK
-	bool "Copy-Back Data Cache (else Writethrough)"
-	help
-	  Saying Y here will cause the cache on an MPC8xx processor to be used
-	  in Copy-Back mode.  If you say N here, it is used in Writethrough
-	  mode.
-
-	  If in doubt, say Y here.
-
-config 8xx_CPU6
-	bool "CPU6 Silicon Errata (860 Pre Rev. C)"
-	help
-	  MPC860 CPUs, prior to Rev C have some bugs in the silicon, which
-	  require workarounds for Linux (and most other OSes to work).  If you
-	  get a BUG() very early in boot, this might fix the problem.  For
-	  more details read the document entitled "MPC860 Family Device Errata
-	  Reference" on Motorola's website.  This option also incurs a
-	  performance hit.
-
-	  If in doubt, say N here.
-
-choice
-	prompt "Microcode patch selection"
-	default NO_UCODE_PATCH
-	help
-	  Help not implemented yet, coming soon.
-
-config NO_UCODE_PATCH
-	bool "None"
-
-config USB_SOF_UCODE_PATCH
-	bool "USB SOF patch"
-	help
-	  Help not implemented yet, coming soon.
-
-config I2C_SPI_UCODE_PATCH
-	bool "I2C/SPI relocation patch"
-	help
-	  Help not implemented yet, coming soon.
-
-config I2C_SPI_SMC1_UCODE_PATCH
-	bool "I2C/SPI/SMC1 relocation patch"
-	help
-	  Help not implemented yet, coming soon.
-
-endchoice
-
-config UCODE_PATCH
-	bool
-	default y
-	depends on !NO_UCODE_PATCH
-
-endmenu
-
diff --git a/arch/ppc/8xx_io/Makefile b/arch/ppc/8xx_io/Makefile
deleted file mode 100644
index 1051a06df7e0..000000000000
--- a/arch/ppc/8xx_io/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for the linux MPC8xx ppc-specific parts of comm processor
-#
-
-obj-y			:= commproc.o
-
-obj-$(CONFIG_FEC_ENET)	+= fec.o
-obj-$(CONFIG_SCC_ENET)	+= enet.o
-obj-$(CONFIG_UCODE_PATCH) += micropatch.o
diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c
deleted file mode 100644
index 752443df5ecf..000000000000
--- a/arch/ppc/8xx_io/commproc.c
+++ /dev/null
@@ -1,432 +0,0 @@
-/*
- * General Purpose functions for the global management of the
- * Communication Processor Module.
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * In addition to the individual control of the communication
- * channels, there are a few functions that globally affect the
- * communication processor.
- *
- * Buffer descriptors must be allocated from the dual ported memory
- * space.  The allocator for that is here.  When the communication
- * process is reset, we reclaim the memory available.  There is
- * currently no deallocator for this memory.
- * The amount of space available is platform dependent.  On the
- * MBX, the EPPC software loads additional microcode into the
- * communication processor, and uses some of the DP ram for this
- * purpose.  Current, the first 512 bytes and the last 256 bytes of
- * memory are used.  Right now I am conservative and only use the
- * memory that can never be used for microcode.  If there are
- * applications that require more DP ram, we can expand the boundaries
- * but then we have to be careful of any downloaded microcode.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/module.h>
-#include <asm/mpc8xx.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/8xx_immap.h>
-#include <asm/cpm1.h>
-#include <asm/io.h>
-#include <asm/tlbflush.h>
-#include <asm/rheap.h>
-
-#define immr_map(member)						\
-({									\
-	u32 offset = offsetof(immap_t, member);				\
-	void *addr = ioremap (IMAP_ADDR + offset,			\
-			      FIELD_SIZEOF(immap_t, member));		\
-	addr;								\
-})
-
-#define immr_map_size(member, size)					\
-({									\
-	u32 offset = offsetof(immap_t, member);				\
-	void *addr = ioremap (IMAP_ADDR + offset, size);		\
-	addr;								\
-})
-
-static void m8xx_cpm_dpinit(void);
-cpm8xx_t	*cpmp;		/* Pointer to comm processor space */
-
-/* CPM interrupt vector functions.
-*/
-struct	cpm_action {
-	void	(*handler)(void *);
-	void	*dev_id;
-};
-static	struct	cpm_action cpm_vecs[CPMVEC_NR];
-static	irqreturn_t cpm_interrupt(int irq, void * dev);
-static	irqreturn_t cpm_error_interrupt(int irq, void *dev);
-/* Define a table of names to identify CPM interrupt handlers in
- * /proc/interrupts.
- */
-const char *cpm_int_name[] =
-	{ "error",	"PC4",		"PC5",		"SMC2",
-	  "SMC1",	"SPI",		"PC6",		"Timer 4",
-	  "",		"PC7",		"PC8",		"PC9",
-	  "Timer 3",	"",		"PC10",		"PC11",
-	  "I2C",	"RISC Timer",	"Timer 2",	"",
-	  "IDMA2",	"IDMA1",	"SDMA error",	"PC12",
-	  "PC13",	"Timer 1",	"PC14",		"SCC4",
-	  "SCC3",	"SCC2",		"SCC1",		"PC15"
-	};
-
-static void
-cpm_mask_irq(unsigned int irq)
-{
-	int cpm_vec = irq - CPM_IRQ_OFFSET;
-
-	clrbits32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, (1 << cpm_vec));
-}
-
-static void
-cpm_unmask_irq(unsigned int irq)
-{
-	int cpm_vec = irq - CPM_IRQ_OFFSET;
-
-	setbits32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, (1 << cpm_vec));
-}
-
-static void
-cpm_ack(unsigned int irq)
-{
-	/* We do not need to do anything here. */
-}
-
-static void
-cpm_eoi(unsigned int irq)
-{
-	int cpm_vec = irq - CPM_IRQ_OFFSET;
-
-	out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cisr, (1 << cpm_vec));
-}
-
-struct hw_interrupt_type cpm_pic = {
-	.typename	= " CPM      ",
-	.enable		= cpm_unmask_irq,
-	.disable	= cpm_mask_irq,
-	.ack		= cpm_ack,
-	.end		= cpm_eoi,
-};
-
-void
-m8xx_cpm_reset(void)
-{
-	volatile immap_t	 *imp;
-	volatile cpm8xx_t	*commproc;
-
-	imp = (immap_t *)IMAP_ADDR;
-	commproc = (cpm8xx_t *)&imp->im_cpm;
-
-#ifdef CONFIG_UCODE_PATCH
-	/* Perform a reset.
-	*/
-	commproc->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG);
-
-	/* Wait for it.
-	*/
-	while (commproc->cp_cpcr & CPM_CR_FLG);
-
-	cpm_load_patch(imp);
-#endif
-
-	/* Set SDMA Bus Request priority 5.
-	 * On 860T, this also enables FEC priority 6.  I am not sure
-	 * this is what we really want for some applications, but the
-	 * manual recommends it.
-	 * Bit 25, FAM can also be set to use FEC aggressive mode (860T).
-	 */
-	out_be32(&imp->im_siu_conf.sc_sdcr, 1),
-
-	/* Reclaim the DP memory for our use. */
-	m8xx_cpm_dpinit();
-
-	/* Tell everyone where the comm processor resides.
-	*/
-	cpmp = (cpm8xx_t *)commproc;
-}
-
-/* This is called during init_IRQ.  We used to do it above, but this
- * was too early since init_IRQ was not yet called.
- */
-static struct irqaction cpm_error_irqaction = {
-	.handler = cpm_error_interrupt,
-	.mask = CPU_MASK_NONE,
-};
-static struct irqaction cpm_interrupt_irqaction = {
-	.handler = cpm_interrupt,
-	.mask = CPU_MASK_NONE,
-	.name = "CPM cascade",
-};
-
-void
-cpm_interrupt_init(void)
-{
-	int i;
-
-	/* Initialize the CPM interrupt controller.
-	*/
-	out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr,
-	    (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
-		((CPM_INTERRUPT/2) << 13) | CICR_HP_MASK);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cimr, 0);
-
-        /* install the CPM interrupt controller routines for the CPM
-         * interrupt vectors
-         */
-        for ( i = CPM_IRQ_OFFSET ; i < CPM_IRQ_OFFSET + NR_CPM_INTS ; i++ )
-                irq_desc[i].chip = &cpm_pic;
-
-	/* Set our interrupt handler with the core CPU.	*/
-	if (setup_irq(CPM_INTERRUPT, &cpm_interrupt_irqaction))
-		panic("Could not allocate CPM IRQ!");
-
-	/* Install our own error handler. */
-	cpm_error_irqaction.name = cpm_int_name[CPMVEC_ERROR];
-	if (setup_irq(CPM_IRQ_OFFSET + CPMVEC_ERROR, &cpm_error_irqaction))
-		panic("Could not allocate CPM error IRQ!");
-
-	setbits32(&((immap_t *)IMAP_ADDR)->im_cpic.cpic_cicr, CICR_IEN);
-}
-
-/*
- * Get the CPM interrupt vector.
- */
-int
-cpm_get_irq(void)
-{
-	int cpm_vec;
-
-	/* Get the vector by setting the ACK bit and then reading
-	 * the register.
-	 */
-	out_be16(&((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr, 1);
-	cpm_vec = in_be16(&((volatile immap_t *)IMAP_ADDR)->im_cpic.cpic_civr);
-	cpm_vec >>= 11;
-
-	return cpm_vec;
-}
-
-/* CPM interrupt controller cascade interrupt.
-*/
-static	irqreturn_t
-cpm_interrupt(int irq, void * dev)
-{
-	/* This interrupt handler never actually gets called.  It is
-	 * installed only to unmask the CPM cascade interrupt in the SIU
-	 * and to make the CPM cascade interrupt visible in /proc/interrupts.
-	 */
-	return IRQ_HANDLED;
-}
-
-/* The CPM can generate the error interrupt when there is a race condition
- * between generating and masking interrupts.  All we have to do is ACK it
- * and return.  This is a no-op function so we don't need any special
- * tests in the interrupt handler.
- */
-static	irqreturn_t
-cpm_error_interrupt(int irq, void *dev)
-{
-	return IRQ_HANDLED;
-}
-
-/* A helper function to translate the handler prototype required by
- * request_irq() to the handler prototype required by cpm_install_handler().
- */
-static irqreturn_t
-cpm_handler_helper(int irq, void *dev_id)
-{
-	int cpm_vec = irq - CPM_IRQ_OFFSET;
-
-	(*cpm_vecs[cpm_vec].handler)(dev_id);
-
-	return IRQ_HANDLED;
-}
-
-/* Install a CPM interrupt handler.
- * This routine accepts a CPM interrupt vector in the range 0 to 31.
- * This routine is retained for backward compatibility.  Rather than using
- * this routine to install a CPM interrupt handler, you can now use
- * request_irq() with an IRQ in the range CPM_IRQ_OFFSET to
- * CPM_IRQ_OFFSET + NR_CPM_INTS - 1 (16 to 47).
- *
- * Notice that the prototype of the interrupt handler function must be
- * different depending on whether you install the handler with
- * request_irq() or cpm_install_handler().
- */
-void
-cpm_install_handler(int cpm_vec, void (*handler)(void *), void *dev_id)
-{
-	int err;
-
-	/* If null handler, assume we are trying to free the IRQ.
-	*/
-	if (!handler) {
-		free_irq(CPM_IRQ_OFFSET + cpm_vec, dev_id);
-		return;
-	}
-
-	if (cpm_vecs[cpm_vec].handler != 0)
-		printk(KERN_INFO "CPM interrupt %x replacing %x\n",
-			(uint)handler, (uint)cpm_vecs[cpm_vec].handler);
-	cpm_vecs[cpm_vec].handler = handler;
-	cpm_vecs[cpm_vec].dev_id = dev_id;
-
-	if ((err = request_irq(CPM_IRQ_OFFSET + cpm_vec, cpm_handler_helper,
-					0, cpm_int_name[cpm_vec], dev_id)))
-		printk(KERN_ERR "request_irq() returned %d for CPM vector %d\n",
-				err, cpm_vec);
-}
-
-/* Free a CPM interrupt handler.
- * This routine accepts a CPM interrupt vector in the range 0 to 31.
- * This routine is retained for backward compatibility.
- */
-void
-cpm_free_handler(int cpm_vec)
-{
-	request_irq(CPM_IRQ_OFFSET + cpm_vec, NULL, 0, 0,
-		cpm_vecs[cpm_vec].dev_id);
-
-	cpm_vecs[cpm_vec].handler = NULL;
-	cpm_vecs[cpm_vec].dev_id = NULL;
-}
-
-/* Set a baud rate generator.  This needs lots of work.  There are
- * four BRGs, any of which can be wired to any channel.
- * The internal baud rate clock is the system clock divided by 16.
- * This assumes the baudrate is 16x oversampled by the uart.
- */
-#define BRG_INT_CLK		(((bd_t *)__res)->bi_intfreq)
-#define BRG_UART_CLK		(BRG_INT_CLK/16)
-#define BRG_UART_CLK_DIV16	(BRG_UART_CLK/16)
-
-void
-cpm_setbrg(uint brg, uint rate)
-{
-	volatile uint	*bp;
-
-	/* This is good enough to get SMCs running.....
-	*/
-	bp = (uint *)&cpmp->cp_brgc1;
-	bp += brg;
-	/* The BRG has a 12-bit counter.  For really slow baud rates (or
-	 * really fast processors), we may have to further divide by 16.
-	 */
-	if (((BRG_UART_CLK / rate) - 1) < 4096)
-		*bp = (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN;
-	else
-		*bp = (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) |
-						CPM_BRG_EN | CPM_BRG_DIV16;
-}
-
-/*
- * dpalloc / dpfree bits.
- */
-static spinlock_t cpm_dpmem_lock;
-/*
- * 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up...
- */
-static rh_block_t cpm_boot_dpmem_rh_block[16];
-static rh_info_t cpm_dpmem_info;
-
-#define CPM_DPMEM_ALIGNMENT	8
-static u8* dpram_vbase;
-static uint dpram_pbase;
-
-void m8xx_cpm_dpinit(void)
-{
-	spin_lock_init(&cpm_dpmem_lock);
-
-	dpram_vbase = immr_map_size(im_cpm.cp_dpmem, CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE);
-	dpram_pbase = (uint)&((immap_t *)IMAP_ADDR)->im_cpm.cp_dpmem;
-
-	/* Initialize the info header */
-	rh_init(&cpm_dpmem_info, CPM_DPMEM_ALIGNMENT,
-			sizeof(cpm_boot_dpmem_rh_block) /
-			sizeof(cpm_boot_dpmem_rh_block[0]),
-			cpm_boot_dpmem_rh_block);
-
-	/*
-	 * Attach the usable dpmem area.
-	 * XXX: This is actually crap.  CPM_DATAONLY_BASE and
-	 * CPM_DATAONLY_SIZE are a subset of the available dparm.  It varies
-	 * with the processor and the microcode patches applied / activated.
-	 * But the following should be at least safe.
-	 */
-	rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
-}
-
-/*
- * Allocate the requested size worth of DP memory.
- * This function returns an offset into the DPRAM area.
- * Use cpm_dpram_addr() to get the virtual address of the area.
- */
-unsigned long cpm_dpalloc(uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc);
-
-int cpm_dpfree(unsigned long offset)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	ret = rh_free(&cpm_dpmem_info, offset);
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(cpm_dpfree);
-
-unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc_fixed);
-
-void cpm_dpdump(void)
-{
-	rh_dump(&cpm_dpmem_info);
-}
-EXPORT_SYMBOL(cpm_dpdump);
-
-void *cpm_dpram_addr(unsigned long offset)
-{
-	return (void *)(dpram_vbase + offset);
-}
-EXPORT_SYMBOL(cpm_dpram_addr);
-
-uint cpm_dpram_phys(u8* addr)
-{
-	return (dpram_pbase + (uint)(addr - dpram_vbase));
-}
-EXPORT_SYMBOL(cpm_dpram_phys);
diff --git a/arch/ppc/8xx_io/enet.c b/arch/ppc/8xx_io/enet.c
deleted file mode 100644
index 5899aea1644b..000000000000
--- a/arch/ppc/8xx_io/enet.c
+++ /dev/null
@@ -1,982 +0,0 @@
-/*
- * Ethernet driver for Motorola MPC8xx.
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * I copied the basic skeleton from the lance driver, because I did not
- * know how to write the Linux driver, but I did know how the LANCE worked.
- *
- * This version of the driver is somewhat selectable for the different
- * processor/board combinations.  It works for the boards I know about
- * now, and should be easily modified to include others.  Some of the
- * configuration information is contained in <asm/cpm1.h> and the
- * remainder is here.
- *
- * Buffer descriptors are kept in the CPM dual port RAM, and the frame
- * buffers are in the host memory.
- *
- * Right now, I am very watseful with the buffers.  I allocate memory
- * pages and then divide them into 2K frame buffers.  This way I know I
- * have buffers large enough to hold one frame within one buffer descriptor.
- * Once I get this working, I will use 64 or 128 byte CPM buffers, which
- * will be much more memory efficient and will easily handle lots of
- * small packets.
- *
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/dma-mapping.h>
-#include <linux/bitops.h>
-
-#include <asm/8xx_immap.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8xx.h>
-#include <asm/uaccess.h>
-#include <asm/cpm1.h>
-#include <asm/cacheflush.h>
-
-/*
- *				Theory of Operation
- *
- * The MPC8xx CPM performs the Ethernet processing on SCC1.  It can use
- * an aribtrary number of buffers on byte boundaries, but must have at
- * least two receive buffers to prevent constant overrun conditions.
- *
- * The buffer descriptors are allocated from the CPM dual port memory
- * with the data buffers allocated from host memory, just like all other
- * serial communication protocols.  The host memory buffers are allocated
- * from the free page pool, and then divided into smaller receive and
- * transmit buffers.  The size of the buffers should be a power of two,
- * since that nicely divides the page.  This creates a ring buffer
- * structure similar to the LANCE and other controllers.
- *
- * Like the LANCE driver:
- * The driver runs as two independent, single-threaded flows of control.  One
- * is the send-packet routine, which enforces single-threaded use by the
- * cep->tx_busy flag.  The other thread is the interrupt handler, which is
- * single threaded by the hardware and other software.
- *
- * The send packet thread has partial control over the Tx ring and the
- * 'cep->tx_busy' flag.  It sets the tx_busy flag whenever it's queuing a Tx
- * packet. If the next queue slot is empty, it clears the tx_busy flag when
- * finished otherwise it sets the 'lp->tx_full' flag.
- *
- * The MBX has a control register external to the MPC8xx that has some
- * control of the Ethernet interface.  Information is in the manual for
- * your board.
- *
- * The RPX boards have an external control/status register.  Consult the
- * programming documents for details unique to your board.
- *
- * For the TQM8xx(L) modules, there is no control register interface.
- * All functions are directly controlled using I/O pins.  See <asm/cpm1.h>.
- */
-
-/* The transmitter timeout
- */
-#define TX_TIMEOUT	(2*HZ)
-
-/* The number of Tx and Rx buffers.  These are allocated from the page
- * pool.  The code may assume these are power of two, so it is best
- * to keep them that size.
- * We don't need to allocate pages for the transmitter.  We just use
- * the skbuffer directly.
- */
-#ifdef CONFIG_ENET_BIG_BUFFERS
-#define CPM_ENET_RX_PAGES	32
-#define CPM_ENET_RX_FRSIZE	2048
-#define CPM_ENET_RX_FRPPG	(PAGE_SIZE / CPM_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(CPM_ENET_RX_FRPPG * CPM_ENET_RX_PAGES)
-#define TX_RING_SIZE		64	/* Must be power of two */
-#define TX_RING_MOD_MASK	63	/*   for this to work */
-#else
-#define CPM_ENET_RX_PAGES	4
-#define CPM_ENET_RX_FRSIZE	2048
-#define CPM_ENET_RX_FRPPG	(PAGE_SIZE / CPM_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(CPM_ENET_RX_FRPPG * CPM_ENET_RX_PAGES)
-#define TX_RING_SIZE		8	/* Must be power of two */
-#define TX_RING_MOD_MASK	7	/*   for this to work */
-#endif
-
-/* The CPM stores dest/src/type, data, and checksum for receive packets.
- */
-#define PKT_MAXBUF_SIZE		1518
-#define PKT_MINBUF_SIZE		64
-#define PKT_MAXBLR_SIZE		1520
-
-/* The CPM buffer descriptors track the ring buffers.  The rx_bd_base and
- * tx_bd_base always point to the base of the buffer descriptors.  The
- * cur_rx and cur_tx point to the currently available buffer.
- * The dirty_tx tracks the current buffer that is being sent by the
- * controller.  The cur_tx and dirty_tx are equal under both completely
- * empty and completely full conditions.  The empty/ready indicator in
- * the buffer descriptor determines the actual condition.
- */
-struct scc_enet_private {
-	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
-	struct	sk_buff* tx_skbuff[TX_RING_SIZE];
-	ushort	skb_cur;
-	ushort	skb_dirty;
-
-	/* CPM dual port RAM relative addresses.
-	*/
-	cbd_t	*rx_bd_base;		/* Address of Rx and Tx buffers. */
-	cbd_t	*tx_bd_base;
-	cbd_t	*cur_rx, *cur_tx;		/* The next free ring entry */
-	cbd_t	*dirty_tx;	/* The ring entries to be free()ed. */
-	scc_t	*sccp;
-
-	/* Virtual addresses for the receive buffers because we can't
-	 * do a __va() on them anymore.
-	 */
-	unsigned char *rx_vaddr[RX_RING_SIZE];
-	struct	net_device_stats stats;
-	uint	tx_full;
-	spinlock_t lock;
-};
-
-static int scc_enet_open(struct net_device *dev);
-static int scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
-static int scc_enet_rx(struct net_device *dev);
-static void scc_enet_interrupt(void *dev_id);
-static int scc_enet_close(struct net_device *dev);
-static struct net_device_stats *scc_enet_get_stats(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-
-/* Get this from various configuration locations (depends on board).
-*/
-/*static	ushort	my_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };*/
-
-/* Typically, 860(T) boards use SCC1 for Ethernet, and other 8xx boards
- * use SCC2. Some even may use SCC3.
- * This is easily extended if necessary.
- */
-#if defined(CONFIG_SCC3_ENET)
-#define CPM_CR_ENET	CPM_CR_CH_SCC3
-#define PROFF_ENET	PROFF_SCC3
-#define SCC_ENET	2		/* Index, not number! */
-#define CPMVEC_ENET	CPMVEC_SCC3
-#elif defined(CONFIG_SCC2_ENET)
-#define CPM_CR_ENET	CPM_CR_CH_SCC2
-#define PROFF_ENET	PROFF_SCC2
-#define SCC_ENET	1		/* Index, not number! */
-#define CPMVEC_ENET	CPMVEC_SCC2
-#elif defined(CONFIG_SCC1_ENET)
-#define CPM_CR_ENET	CPM_CR_CH_SCC1
-#define PROFF_ENET	PROFF_SCC1
-#define SCC_ENET	0		/* Index, not number! */
-#define CPMVEC_ENET	CPMVEC_SCC1
-#else
-#error CONFIG_SCCx_ENET not defined
-#endif
-
-static int
-scc_enet_open(struct net_device *dev)
-{
-
-	/* I should reset the ring buffers here, but I don't yet know
-	 * a simple way to do that.
-	 */
-
-	netif_start_queue(dev);
-	return 0;					/* Always succeed */
-}
-
-static int
-scc_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-	volatile cbd_t	*bdp;
-
-	/* Fill in a Tx ring entry */
-	bdp = cep->cur_tx;
-
-#ifndef final_version
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		/* Ooops.  All transmit buffers are full.  Bail out.
-		 * This should not happen, since cep->tx_busy should be set.
-		 */
-		printk("%s: tx queue full!.\n", dev->name);
-		return 1;
-	}
-#endif
-
-	/* Clear all of the status flags.
-	 */
-	bdp->cbd_sc &= ~BD_ENET_TX_STATS;
-
-	/* If the frame is short, tell CPM to pad it.
-	*/
-	if (skb->len <= ETH_ZLEN)
-		bdp->cbd_sc |= BD_ENET_TX_PAD;
-	else
-		bdp->cbd_sc &= ~BD_ENET_TX_PAD;
-
-	/* Set buffer length and buffer pointer.
-	*/
-	bdp->cbd_datlen = skb->len;
-	bdp->cbd_bufaddr = __pa(skb->data);
-
-	/* Save skb pointer.
-	*/
-	cep->tx_skbuff[cep->skb_cur] = skb;
-
-	cep->stats.tx_bytes += skb->len;
-	cep->skb_cur = (cep->skb_cur+1) & TX_RING_MOD_MASK;
-
-	/* Push the data cache so the CPM does not get stale memory
-	 * data.
-	 */
-	flush_dcache_range((unsigned long)(skb->data),
-					(unsigned long)(skb->data + skb->len));
-
-	spin_lock_irq(&cep->lock);
-
-	/* Send it on its way.  Tell CPM its ready, interrupt when done,
-	 * its the last BD of the frame, and to put the CRC on the end.
-	 */
-	bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR | BD_ENET_TX_LAST | BD_ENET_TX_TC);
-
-	dev->trans_start = jiffies;
-
-	/* If this was the last BD in the ring, start at the beginning again.
-	*/
-	if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-		bdp = cep->tx_bd_base;
-	else
-		bdp++;
-
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		netif_stop_queue(dev);
-		cep->tx_full = 1;
-	}
-
-	cep->cur_tx = (cbd_t *)bdp;
-
-	spin_unlock_irq(&cep->lock);
-
-	return 0;
-}
-
-static void
-scc_enet_timeout(struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-
-	printk("%s: transmit timed out.\n", dev->name);
-	cep->stats.tx_errors++;
-#ifndef final_version
-	{
-		int	i;
-		cbd_t	*bdp;
-		printk(" Ring data dump: cur_tx %p%s cur_rx %p.\n",
-		       cep->cur_tx, cep->tx_full ? " (full)" : "",
-		       cep->cur_rx);
-		bdp = cep->tx_bd_base;
-		for (i = 0 ; i < TX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-		bdp = cep->rx_bd_base;
-		for (i = 0 ; i < RX_RING_SIZE; i++, bdp++)
-			printk("%04x %04x %08x\n",
-			       bdp->cbd_sc,
-			       bdp->cbd_datlen,
-			       bdp->cbd_bufaddr);
-	}
-#endif
-	if (!cep->tx_full)
-		netif_wake_queue(dev);
-}
-
-/* The interrupt handler.
- * This is called from the CPM handler, not the MPC core interrupt.
- */
-static void
-scc_enet_interrupt(void *dev_id)
-{
-	struct	net_device *dev = dev_id;
-	volatile struct	scc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	ushort	int_events;
-	int	must_restart;
-
-	cep = (struct scc_enet_private *)dev->priv;
-
-	/* Get the interrupt events that caused us to be here.
-	*/
-	int_events = cep->sccp->scc_scce;
-	cep->sccp->scc_scce = int_events;
-	must_restart = 0;
-
-	/* Handle receive event in its own function.
-	*/
-	if (int_events & SCCE_ENET_RXF)
-		scc_enet_rx(dev_id);
-
-	/* Check for a transmit error.  The manual is a little unclear
-	 * about this, so the debug code until I get it figured out.  It
-	 * appears that if TXE is set, then TXB is not set.  However,
-	 * if carrier sense is lost during frame transmission, the TXE
-	 * bit is set, "and continues the buffer transmission normally."
-	 * I don't know if "normally" implies TXB is set when the buffer
-	 * descriptor is closed.....trial and error :-).
-	 */
-
-	/* Transmit OK, or non-fatal error.  Update the buffer descriptors.
-	*/
-	if (int_events & (SCCE_ENET_TXE | SCCE_ENET_TXB)) {
-	    spin_lock(&cep->lock);
-	    bdp = cep->dirty_tx;
-	    while ((bdp->cbd_sc&BD_ENET_TX_READY)==0) {
-		if ((bdp==cep->cur_tx) && (cep->tx_full == 0))
-		    break;
-
-		if (bdp->cbd_sc & BD_ENET_TX_HB)	/* No heartbeat */
-			cep->stats.tx_heartbeat_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_LC)	/* Late collision */
-			cep->stats.tx_window_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_RL)	/* Retrans limit */
-			cep->stats.tx_aborted_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_UN)	/* Underrun */
-			cep->stats.tx_fifo_errors++;
-		if (bdp->cbd_sc & BD_ENET_TX_CSL)	/* Carrier lost */
-			cep->stats.tx_carrier_errors++;
-
-
-		/* No heartbeat or Lost carrier are not really bad errors.
-		 * The others require a restart transmit command.
-		 */
-		if (bdp->cbd_sc &
-		    (BD_ENET_TX_LC | BD_ENET_TX_RL | BD_ENET_TX_UN)) {
-			must_restart = 1;
-			cep->stats.tx_errors++;
-		}
-
-		cep->stats.tx_packets++;
-
-		/* Deferred means some collisions occurred during transmit,
-		 * but we eventually sent the packet OK.
-		 */
-		if (bdp->cbd_sc & BD_ENET_TX_DEF)
-			cep->stats.collisions++;
-
-		/* Free the sk buffer associated with this last transmit.
-		*/
-		dev_kfree_skb_irq(cep->tx_skbuff[cep->skb_dirty]);
-		cep->skb_dirty = (cep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
-		/* Update pointer to next buffer descriptor to be transmitted.
-		*/
-		if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-			bdp = cep->tx_bd_base;
-		else
-			bdp++;
-
-		/* I don't know if we can be held off from processing these
-		 * interrupts for more than one frame time.  I really hope
-		 * not.  In such a case, we would now want to check the
-		 * currently available BD (cur_tx) and determine if any
-		 * buffers between the dirty_tx and cur_tx have also been
-		 * sent.  We would want to process anything in between that
-		 * does not have BD_ENET_TX_READY set.
-		 */
-
-		/* Since we have freed up a buffer, the ring is no longer
-		 * full.
-		 */
-		if (cep->tx_full) {
-			cep->tx_full = 0;
-			if (netif_queue_stopped(dev))
-				netif_wake_queue(dev);
-		}
-
-		cep->dirty_tx = (cbd_t *)bdp;
-	    }
-
-	    if (must_restart) {
-		volatile cpm8xx_t *cp;
-
-		/* Some transmit errors cause the transmitter to shut
-		 * down.  We now issue a restart transmit.  Since the
-		 * errors close the BD and update the pointers, the restart
-		 * _should_ pick up without having to reset any of our
-		 * pointers either.
-		 */
-		cp = cpmp;
-		cp->cp_cpcr =
-		    mk_cr_cmd(CPM_CR_ENET, CPM_CR_RESTART_TX) | CPM_CR_FLG;
-		while (cp->cp_cpcr & CPM_CR_FLG);
-	    }
-	    spin_unlock(&cep->lock);
-	}
-
-	/* Check for receive busy, i.e. packets coming but no place to
-	 * put them.  This "can't happen" because the receive interrupt
-	 * is tossing previous frames.
-	 */
-	if (int_events & SCCE_ENET_BSY) {
-		cep->stats.rx_dropped++;
-		printk("CPM ENET: BSY can't happen.\n");
-	}
-
-	return;
-}
-
-/* During a receive, the cur_rx points to the current incoming buffer.
- * When we update through the ring, if the next incoming buffer has
- * not been given to the system, we just set the empty indicator,
- * effectively tossing the packet.
- */
-static int
-scc_enet_rx(struct net_device *dev)
-{
-	struct	scc_enet_private *cep;
-	volatile cbd_t	*bdp;
-	struct	sk_buff *skb;
-	ushort	pkt_len;
-
-	cep = (struct scc_enet_private *)dev->priv;
-
-	/* First, grab all of the stats for the incoming packet.
-	 * These get messed up if we get called due to a busy condition.
-	 */
-	bdp = cep->cur_rx;
-
-for (;;) {
-	if (bdp->cbd_sc & BD_ENET_RX_EMPTY)
-		break;
-
-#ifndef final_version
-	/* Since we have allocated space to hold a complete frame, both
-	 * the first and last indicators should be set.
-	 */
-	if ((bdp->cbd_sc & (BD_ENET_RX_FIRST | BD_ENET_RX_LAST)) !=
-		(BD_ENET_RX_FIRST | BD_ENET_RX_LAST))
-			printk("CPM ENET: rcv is not first+last\n");
-#endif
-
-	/* Frame too long or too short.
-	*/
-	if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH))
-		cep->stats.rx_length_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_NO)	/* Frame alignment */
-		cep->stats.rx_frame_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_CR)	/* CRC Error */
-		cep->stats.rx_crc_errors++;
-	if (bdp->cbd_sc & BD_ENET_RX_OV)	/* FIFO overrun */
-		cep->stats.rx_crc_errors++;
-
-	/* Report late collisions as a frame error.
-	 * On this error, the BD is closed, but we don't know what we
-	 * have in the buffer.  So, just drop this frame on the floor.
-	 */
-	if (bdp->cbd_sc & BD_ENET_RX_CL) {
-		cep->stats.rx_frame_errors++;
-	}
-	else {
-
-		/* Process the incoming frame.
-		*/
-		cep->stats.rx_packets++;
-		pkt_len = bdp->cbd_datlen;
-		cep->stats.rx_bytes += pkt_len;
-
-		/* This does 16 byte alignment, much more than we need.
-		 * The packet length includes FCS, but we don't want to
-		 * include that when passing upstream as it messes up
-		 * bridging applications.
-		 */
-		skb = dev_alloc_skb(pkt_len-4);
-
-		if (skb == NULL) {
-			printk("%s: Memory squeeze, dropping packet.\n", dev->name);
-			cep->stats.rx_dropped++;
-		}
-		else {
-			skb_put(skb,pkt_len-4);	/* Make room */
-			skb_copy_to_linear_data(skb,
-				cep->rx_vaddr[bdp - cep->rx_bd_base],
-				pkt_len-4);
-			skb->protocol=eth_type_trans(skb,dev);
-			netif_rx(skb);
-		}
-	}
-
-	/* Clear the status flags for this buffer.
-	*/
-	bdp->cbd_sc &= ~BD_ENET_RX_STATS;
-
-	/* Mark the buffer empty.
-	*/
-	bdp->cbd_sc |= BD_ENET_RX_EMPTY;
-
-	/* Update BD pointer to next entry.
-	*/
-	if (bdp->cbd_sc & BD_ENET_RX_WRAP)
-		bdp = cep->rx_bd_base;
-	else
-		bdp++;
-
-   }
-	cep->cur_rx = (cbd_t *)bdp;
-
-	return 0;
-}
-
-static int
-scc_enet_close(struct net_device *dev)
-{
-	/* Don't know what to do yet.
-	*/
-	netif_stop_queue(dev);
-
-	return 0;
-}
-
-static struct net_device_stats *scc_enet_get_stats(struct net_device *dev)
-{
-	struct scc_enet_private *cep = (struct scc_enet_private *)dev->priv;
-
-	return &cep->stats;
-}
-
-/* Set or clear the multicast filter for this adaptor.
- * Skeleton taken from sunlance driver.
- * The CPM Ethernet implementation allows Multicast as well as individual
- * MAC address filtering.  Some of the drivers check to make sure it is
- * a group multicast address, and discard those that are not.  I guess I
- * will do the same for now, but just remove the test if you want
- * individual filtering as well (do the upper net layers want or support
- * this kind of feature?).
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
-	struct	scc_enet_private *cep;
-	struct	dev_mc_list *dmi;
-	u_char	*mcptr, *tdptr;
-	volatile scc_enet_t *ep;
-	int	i, j;
-	cep = (struct scc_enet_private *)dev->priv;
-
-	/* Get pointer to SCC area in parameter RAM.
-	*/
-	ep = (scc_enet_t *)dev->base_addr;
-
-	if (dev->flags&IFF_PROMISC) {
-	
-		/* Log any net taps. */
-		printk("%s: Promiscuous mode enabled.\n", dev->name);
-		cep->sccp->scc_psmr |= SCC_PSMR_PRO;
-	} else {
-
-		cep->sccp->scc_psmr &= ~SCC_PSMR_PRO;
-
-		if (dev->flags & IFF_ALLMULTI) {
-			/* Catch all multicast addresses, so set the
-			 * filter to all 1's.
-			 */
-			ep->sen_gaddr1 = 0xffff;
-			ep->sen_gaddr2 = 0xffff;
-			ep->sen_gaddr3 = 0xffff;
-			ep->sen_gaddr4 = 0xffff;
-		}
-		else {
-			/* Clear filter and add the addresses in the list.
-			*/
-			ep->sen_gaddr1 = 0;
-			ep->sen_gaddr2 = 0;
-			ep->sen_gaddr3 = 0;
-			ep->sen_gaddr4 = 0;
-
-			dmi = dev->mc_list;
-
-			for (i=0; i<dev->mc_count; i++) {
-		
-				/* Only support group multicast for now.
-				*/
-				if (!(dmi->dmi_addr[0] & 1))
-					continue;
-
-				/* The address in dmi_addr is LSB first,
-				 * and taddr is MSB first.  We have to
-				 * copy bytes MSB first from dmi_addr.
-				 */
-				mcptr = (u_char *)dmi->dmi_addr + 5;
-				tdptr = (u_char *)&ep->sen_taddrh;
-				for (j=0; j<6; j++)
-					*tdptr++ = *mcptr--;
-
-				/* Ask CPM to run CRC and set bit in
-				 * filter mask.
-				 */
-				cpmp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_SET_GADDR) | CPM_CR_FLG;
-				/* this delay is necessary here -- Cort */
-				udelay(10);
-				while (cpmp->cp_cpcr & CPM_CR_FLG);
-			}
-		}
-	}
-}
-
-/* Initialize the CPM Ethernet on SCC.  If EPPC-Bug loaded us, or performed
- * some other network I/O, a whole bunch of this has already been set up.
- * It is no big deal if we do it again, we just have to disable the
- * transmit and receive to make sure we don't catch the CPM with some
- * inconsistent control information.
- */
-static int __init scc_enet_init(void)
-{
-	struct net_device *dev;
-	struct scc_enet_private *cep;
-	int i, j, k, err;
-	uint dp_offset;
-	unsigned char	*eap, *ba;
-	dma_addr_t	mem_addr;
-	bd_t		*bd;
-	volatile	cbd_t		*bdp;
-	volatile	cpm8xx_t	*cp;
-	volatile	scc_t		*sccp;
-	volatile	scc_enet_t	*ep;
-	volatile	immap_t		*immap;
-
-	cp = cpmp;	/* Get pointer to Communication Processor */
-
-	immap = (immap_t *)(mfspr(SPRN_IMMR) & 0xFFFF0000);	/* and to internal registers */
-
-	bd = (bd_t *)__res;
-
-	dev = alloc_etherdev(sizeof(*cep));
-	if (!dev)
-		return -ENOMEM;
-
-	cep = dev->priv;
-	spin_lock_init(&cep->lock);
-
-	/* Get pointer to SCC area in parameter RAM.
-	*/
-	ep = (scc_enet_t *)(&cp->cp_dparam[PROFF_ENET]);
-
-	/* And another to the SCC register area.
-	*/
-	sccp = (volatile scc_t *)(&cp->cp_scc[SCC_ENET]);
-	cep->sccp = (scc_t *)sccp;		/* Keep the pointer handy */
-
-	/* Disable receive and transmit in case EPPC-Bug started it.
-	*/
-	sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	/* Cookbook style from the MPC860 manual.....
-	 * Not all of this is necessary if EPPC-Bug has initialized
-	 * the network.
-	 * So far we are lucky, all board configurations use the same
-	 * pins, or at least the same I/O Port for these functions.....
-	 * It can't last though......
-	 */
-
-#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
-	/* Configure port A pins for Txd and Rxd.
-	*/
-	immap->im_ioport.iop_papar |=  (PA_ENET_RXD | PA_ENET_TXD);
-	immap->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
-	immap->im_ioport.iop_paodr &=                ~PA_ENET_TXD;
-#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
-	/* Configure port B pins for Txd and Rxd.
-	*/
-	immap->im_cpm.cp_pbpar |=  (PB_ENET_RXD | PB_ENET_TXD);
-	immap->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
-	immap->im_cpm.cp_pbodr &=		 ~PB_ENET_TXD;
-#else
-#error Exactly ONE pair of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
-#endif
-
-#if defined(PC_ENET_LBK)
-	/* Configure port C pins to disable External Loopback
-	 */
-	immap->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
-	immap->im_ioport.iop_pcdir |=  PC_ENET_LBK;
-	immap->im_ioport.iop_pcso  &= ~PC_ENET_LBK;
-	immap->im_ioport.iop_pcdat &= ~PC_ENET_LBK;	/* Disable Loopback */
-#endif	/* PC_ENET_LBK */
-
-#ifdef PE_ENET_TCLK
-	/* Configure port E for TCLK and RCLK.
-	*/
-	cp->cp_pepar |=  (PE_ENET_TCLK | PE_ENET_RCLK);
-	cp->cp_pedir &= ~(PE_ENET_TCLK | PE_ENET_RCLK);
-	cp->cp_peso  &= ~(PE_ENET_TCLK | PE_ENET_RCLK);
-#else
-	/* Configure port A for TCLK and RCLK.
-	*/
-	immap->im_ioport.iop_papar |=  (PA_ENET_TCLK | PA_ENET_RCLK);
-	immap->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
-#endif
-
-	/* Configure port C pins to enable CLSN and RENA.
-	*/
-	immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
-	immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
-	immap->im_ioport.iop_pcso  |=  (PC_ENET_CLSN | PC_ENET_RENA);
-
-	/* Configure Serial Interface clock routing.
-	 * First, clear all SCC bits to zero, then set the ones we want.
-	 */
-	cp->cp_sicr &= ~SICR_ENET_MASK;
-	cp->cp_sicr |=  SICR_ENET_CLKRT;
-
-	/* Manual says set SDDR, but I can't find anything with that
-	 * name.  I think it is a misprint, and should be SDCR.  This
-	 * has already been set by the communication processor initialization.
-	 */
-
-	/* Allocate space for the buffer descriptors in the DP ram.
-	 * These are relative offsets in the DP ram address space.
-	 * Initialize base addresses for the buffer descriptors.
-	 */
-	dp_offset = cpm_dpalloc(sizeof(cbd_t) * RX_RING_SIZE, 8);
-	ep->sen_genscc.scc_rbase = dp_offset;
-	cep->rx_bd_base = cpm_dpram_addr(dp_offset);
-
-	dp_offset = cpm_dpalloc(sizeof(cbd_t) * TX_RING_SIZE, 8);
-	ep->sen_genscc.scc_tbase = dp_offset;
-	cep->tx_bd_base = cpm_dpram_addr(dp_offset);
-
-	cep->dirty_tx = cep->cur_tx = cep->tx_bd_base;
-	cep->cur_rx = cep->rx_bd_base;
-
-	/* Issue init Rx BD command for SCC.
-	 * Manual says to perform an Init Rx parameters here.  We have
-	 * to perform both Rx and Tx because the SCC may have been
-	 * already running.
-	 * In addition, we have to do it later because we don't yet have
-	 * all of the BD control/status set properly.
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_INIT_RX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-	 */
-
-	/* Initialize function code registers for big-endian.
-	*/
-	ep->sen_genscc.scc_rfcr = SCC_EB;
-	ep->sen_genscc.scc_tfcr = SCC_EB;
-
-	/* Set maximum bytes per receive buffer.
-	 * This appears to be an Ethernet frame size, not the buffer
-	 * fragment size.  It must be a multiple of four.
-	 */
-	ep->sen_genscc.scc_mrblr = PKT_MAXBLR_SIZE;
-
-	/* Set CRC preset and mask.
-	*/
-	ep->sen_cpres = 0xffffffff;
-	ep->sen_cmask = 0xdebb20e3;
-
-	ep->sen_crcec = 0;	/* CRC Error counter */
-	ep->sen_alec = 0;	/* alignment error counter */
-	ep->sen_disfc = 0;	/* discard frame counter */
-
-	ep->sen_pads = 0x8888;	/* Tx short frame pad character */
-	ep->sen_retlim = 15;	/* Retry limit threshold */
-
-	ep->sen_maxflr = PKT_MAXBUF_SIZE;   /* maximum frame length register */
-	ep->sen_minflr = PKT_MINBUF_SIZE;  /* minimum frame length register */
-
-	ep->sen_maxd1 = PKT_MAXBLR_SIZE;	/* maximum DMA1 length */
-	ep->sen_maxd2 = PKT_MAXBLR_SIZE;	/* maximum DMA2 length */
-
-	/* Clear hash tables.
-	*/
-	ep->sen_gaddr1 = 0;
-	ep->sen_gaddr2 = 0;
-	ep->sen_gaddr3 = 0;
-	ep->sen_gaddr4 = 0;
-	ep->sen_iaddr1 = 0;
-	ep->sen_iaddr2 = 0;
-	ep->sen_iaddr3 = 0;
-	ep->sen_iaddr4 = 0;
-
-	/* Set Ethernet station address.
-	 */
-	eap = (unsigned char *)&(ep->sen_paddrh);
-	for (i=5; i>=0; i--)
-		*eap++ = dev->dev_addr[i] = bd->bi_enetaddr[i];
-
-	ep->sen_pper = 0;	/* 'cause the book says so */
-	ep->sen_taddrl = 0;	/* temp address (LSB) */
-	ep->sen_taddrm = 0;
-	ep->sen_taddrh = 0;	/* temp address (MSB) */
-
-	/* Now allocate the host memory pages and initialize the
-	 * buffer descriptors.
-	 */
-	bdp = cep->tx_bd_base;
-	for (i=0; i<TX_RING_SIZE; i++) {
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		bdp->cbd_sc = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	bdp = cep->rx_bd_base;
-	k = 0;
-	for (i=0; i<CPM_ENET_RX_PAGES; i++) {
-
-		/* Allocate a page.
-		*/
-		ba = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE,
-				&mem_addr, GFP_KERNEL);
-		/* BUG: no check for failure */
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		for (j=0; j<CPM_ENET_RX_FRPPG; j++) {
-			bdp->cbd_sc = BD_ENET_RX_EMPTY | BD_ENET_RX_INTR;
-			bdp->cbd_bufaddr = mem_addr;
-			cep->rx_vaddr[k++] = ba;
-			mem_addr += CPM_ENET_RX_FRSIZE;
-			ba += CPM_ENET_RX_FRSIZE;
-			bdp++;
-		}
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* Let's re-initialize the channel now.  We have to do it later
-	 * than the manual describes because we have just now finished
-	 * the BD initialization.
-	 */
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	cep->skb_cur = cep->skb_dirty = 0;
-
-	sccp->scc_scce = 0xffff;	/* Clear any pending events */
-
-	/* Enable interrupts for transmit error, complete frame
-	 * received, and any transmit buffer we have also set the
-	 * interrupt flag.
-	 */
-	sccp->scc_sccm = (SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB);
-
-	/* Install our interrupt handler.
-	*/
-	cpm_install_handler(CPMVEC_ENET, scc_enet_interrupt, dev);
-
-	/* Set GSMR_H to enable all normal operating modes.
-	 * Set GSMR_L to enable Ethernet to MC68160.
-	 */
-	sccp->scc_gsmrh = 0;
-	sccp->scc_gsmrl = (SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 | SCC_GSMRL_TPP_10 | SCC_GSMRL_MODE_ENET);
-
-	/* Set sync/delimiters.
-	*/
-	sccp->scc_dsr = 0xd555;
-
-	/* Set processing mode.  Use Ethernet CRC, catch broadcast, and
-	 * start frame search 22 bit times after RENA.
-	 */
-	sccp->scc_psmr = (SCC_PSMR_ENCRC | SCC_PSMR_NIB22);
-
-	/* It is now OK to enable the Ethernet transmitter.
-	 * Unfortunately, there are board implementation differences here.
-	 */
-#if   (!defined (PB_ENET_TENA) &&  defined (PC_ENET_TENA) && !defined (PE_ENET_TENA))
-	immap->im_ioport.iop_pcpar |=  PC_ENET_TENA;
-	immap->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
-#elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && !defined (PE_ENET_TENA))
-	cp->cp_pbpar |= PB_ENET_TENA;
-	cp->cp_pbdir |= PB_ENET_TENA;
-#elif ( !defined (PB_ENET_TENA) && !defined (PC_ENET_TENA) && defined (PE_ENET_TENA))
-	cp->cp_pepar |=  PE_ENET_TENA;
-	cp->cp_pedir &= ~PE_ENET_TENA;
-	cp->cp_peso  |=  PE_ENET_TENA;
-#else
-#error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA, PE_ENET_TENA
-#endif
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
-	/* And while we are here, set the configuration to enable ethernet.
-	*/
-	*((volatile uint *)RPX_CSR_ADDR) &= ~BCSR0_ETHLPBK;
-	*((volatile uint *)RPX_CSR_ADDR) |=
-			(BCSR0_ETHEN | BCSR0_COLTESTDIS | BCSR0_FULLDPLXDIS);
-#endif
-
-#ifdef CONFIG_BSEIP
-	/* BSE uses port B and C for PHY control.
-	*/
-	cp->cp_pbpar &= ~(PB_BSE_POWERUP | PB_BSE_FDXDIS);
-	cp->cp_pbdir |= (PB_BSE_POWERUP | PB_BSE_FDXDIS);
-	cp->cp_pbdat |= (PB_BSE_POWERUP | PB_BSE_FDXDIS);
-
-	immap->im_ioport.iop_pcpar &= ~PC_BSE_LOOPBACK;
-	immap->im_ioport.iop_pcdir |= PC_BSE_LOOPBACK;
-	immap->im_ioport.iop_pcso &= ~PC_BSE_LOOPBACK;
-	immap->im_ioport.iop_pcdat &= ~PC_BSE_LOOPBACK;
-#endif
-
-#ifdef CONFIG_FADS
-	cp->cp_pbpar |= PB_ENET_TENA;
-	cp->cp_pbdir |= PB_ENET_TENA;
-
-	/* Enable the EEST PHY.
-	*/
-	*((volatile uint *)BCSR1) &= ~BCSR1_ETHEN;
-#endif
-
-	dev->base_addr = (unsigned long)ep;
-#if 0
-	dev->name = "CPM_ENET";
-#endif
-
-	/* The CPM Ethernet specific entries in the device structure. */
-	dev->open = scc_enet_open;
-	dev->hard_start_xmit = scc_enet_start_xmit;
-	dev->tx_timeout = scc_enet_timeout;
-	dev->watchdog_timeo = TX_TIMEOUT;
-	dev->stop = scc_enet_close;
-	dev->get_stats = scc_enet_get_stats;
-	dev->set_multicast_list = set_multicast_list;
-
-	err = register_netdev(dev);
-	if (err) {
-		free_netdev(dev);
-		return err;
-	}
-
-	/* And last, enable the transmit and receive processing.
-	*/
-	sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	printk("%s: CPM ENET Version 0.2 on SCC%d, ", dev->name, SCC_ENET+1);
-	for (i=0; i<5; i++)
-		printk("%02x:", dev->dev_addr[i]);
-	printk("%02x\n", dev->dev_addr[5]);
-
-	return 0;
-}
-
-module_init(scc_enet_init);
-
diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c
deleted file mode 100644
index 2c604d4f6e8b..000000000000
--- a/arch/ppc/8xx_io/fec.c
+++ /dev/null
@@ -1,1983 +0,0 @@
-/*
- * Fast Ethernet Controller (FEC) driver for Motorola MPC8xx.
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- *
- * This version of the driver is specific to the FADS implementation,
- * since the board contains control registers external to the processor
- * for the control of the LevelOne LXT970 transceiver.  The MPC860T manual
- * describes connections using the internal parallel port I/O, which
- * is basically all of Port D.
- *
- * Includes support for the following PHYs: QS6612, LXT970, LXT971/2.
- *
- * Right now, I am very wasteful with the buffers.  I allocate memory
- * pages and then divide them into 2K frame buffers.  This way I know I
- * have buffers large enough to hold one frame within one buffer descriptor.
- * Once I get this working, I will use 64 or 128 byte CPM buffers, which
- * will be much more memory efficient and will easily handle lots of
- * small packets.
- *
- * Much better multiple PHY support by Magnus Damm.
- * Copyright (c) 2000 Ericsson Radio Systems AB.
- *
- * Make use of MII for PHY control configurable.
- * Some fixes.
- * Copyright (c) 2000-2002 Wolfgang Denk, DENX Software Engineering.
- *
- * Support for AMD AM79C874 added.
- * Thomas Lange, thomas@corelatus.com
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/ptrace.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/spinlock.h>
-#include <linux/bitops.h>
-#ifdef CONFIG_FEC_PACKETHOOK
-#include <linux/pkthook.h>
-#endif
-
-#include <asm/8xx_immap.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8xx.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/cpm1.h>
-
-#ifdef	CONFIG_USE_MDIO
-/* Forward declarations of some structures to support different PHYs
-*/
-
-typedef struct {
-	uint mii_data;
-	void (*funct)(uint mii_reg, struct net_device *dev);
-} phy_cmd_t;
-
-typedef struct {
-	uint id;
-	char *name;
-
-	const phy_cmd_t *config;
-	const phy_cmd_t *startup;
-	const phy_cmd_t *ack_int;
-	const phy_cmd_t *shutdown;
-} phy_info_t;
-#endif	/* CONFIG_USE_MDIO */
-
-/* The number of Tx and Rx buffers.  These are allocated from the page
- * pool.  The code may assume these are power of two, so it is best
- * to keep them that size.
- * We don't need to allocate pages for the transmitter.  We just use
- * the skbuffer directly.
- */
-#ifdef CONFIG_ENET_BIG_BUFFERS
-#define FEC_ENET_RX_PAGES	16
-#define FEC_ENET_RX_FRSIZE	2048
-#define FEC_ENET_RX_FRPPG	(PAGE_SIZE / FEC_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES)
-#define TX_RING_SIZE		16	/* Must be power of two */
-#define TX_RING_MOD_MASK	15	/*   for this to work */
-#else
-#define FEC_ENET_RX_PAGES	4
-#define FEC_ENET_RX_FRSIZE	2048
-#define FEC_ENET_RX_FRPPG	(PAGE_SIZE / FEC_ENET_RX_FRSIZE)
-#define RX_RING_SIZE		(FEC_ENET_RX_FRPPG * FEC_ENET_RX_PAGES)
-#define TX_RING_SIZE		8	/* Must be power of two */
-#define TX_RING_MOD_MASK	7	/*   for this to work */
-#endif
-
-/* Interrupt events/masks.
-*/
-#define FEC_ENET_HBERR	((uint)0x80000000)	/* Heartbeat error */
-#define FEC_ENET_BABR	((uint)0x40000000)	/* Babbling receiver */
-#define FEC_ENET_BABT	((uint)0x20000000)	/* Babbling transmitter */
-#define FEC_ENET_GRA	((uint)0x10000000)	/* Graceful stop complete */
-#define FEC_ENET_TXF	((uint)0x08000000)	/* Full frame transmitted */
-#define FEC_ENET_TXB	((uint)0x04000000)	/* A buffer was transmitted */
-#define FEC_ENET_RXF	((uint)0x02000000)	/* Full frame received */
-#define FEC_ENET_RXB	((uint)0x01000000)	/* A buffer was received */
-#define FEC_ENET_MII	((uint)0x00800000)	/* MII interrupt */
-#define FEC_ENET_EBERR	((uint)0x00400000)	/* SDMA bus error */
-
-/*
-*/
-#define FEC_ECNTRL_PINMUX	0x00000004
-#define FEC_ECNTRL_ETHER_EN	0x00000002
-#define FEC_ECNTRL_RESET	0x00000001
-
-#define FEC_RCNTRL_BC_REJ	0x00000010
-#define FEC_RCNTRL_PROM		0x00000008
-#define FEC_RCNTRL_MII_MODE	0x00000004
-#define FEC_RCNTRL_DRT		0x00000002
-#define FEC_RCNTRL_LOOP		0x00000001
-
-#define FEC_TCNTRL_FDEN		0x00000004
-#define FEC_TCNTRL_HBC		0x00000002
-#define FEC_TCNTRL_GTS		0x00000001
-
-/* Delay to wait for FEC reset command to complete (in us)
-*/
-#define FEC_RESET_DELAY		50
-
-/* The FEC stores dest/src/type, data, and checksum for receive packets.
- */
-#define PKT_MAXBUF_SIZE		1518
-#define PKT_MINBUF_SIZE		64
-#define PKT_MAXBLR_SIZE		1520
-
-/* The FEC buffer descriptors track the ring buffers.  The rx_bd_base and
- * tx_bd_base always point to the base of the buffer descriptors.  The
- * cur_rx and cur_tx point to the currently available buffer.
- * The dirty_tx tracks the current buffer that is being sent by the
- * controller.  The cur_tx and dirty_tx are equal under both completely
- * empty and completely full conditions.  The empty/ready indicator in
- * the buffer descriptor determines the actual condition.
- */
-struct fec_enet_private {
-	/* The saved address of a sent-in-place packet/buffer, for skfree(). */
-	struct	sk_buff* tx_skbuff[TX_RING_SIZE];
-	ushort	skb_cur;
-	ushort	skb_dirty;
-
-	/* CPM dual port RAM relative addresses.
-	*/
-	cbd_t	*rx_bd_base;		/* Address of Rx and Tx buffers. */
-	cbd_t	*tx_bd_base;
-	cbd_t	*cur_rx, *cur_tx;		/* The next free ring entry */
-	cbd_t	*dirty_tx;	/* The ring entries to be free()ed. */
-
-	/* Virtual addresses for the receive buffers because we can't
-	 * do a __va() on them anymore.
-	 */
-	unsigned char *rx_vaddr[RX_RING_SIZE];
-
-	struct	net_device_stats stats;
-	uint	tx_full;
-	spinlock_t lock;
-
-#ifdef	CONFIG_USE_MDIO
-	uint	phy_id;
-	uint	phy_id_done;
-	uint	phy_status;
-	uint	phy_speed;
-	phy_info_t	*phy;
-	struct work_struct phy_task;
-	struct net_device *dev;
-
-	uint	sequence_done;
-
-	uint	phy_addr;
-#endif	/* CONFIG_USE_MDIO */
-
-	int	link;
-	int	old_link;
-	int	full_duplex;
-
-#ifdef CONFIG_FEC_PACKETHOOK
-	unsigned long	ph_lock;
-	fec_ph_func	*ph_rxhandler;
-	fec_ph_func	*ph_txhandler;
-	__u16		ph_proto;
-	volatile __u32	*ph_regaddr;
-	void 		*ph_priv;
-#endif
-};
-
-static int fec_enet_open(struct net_device *dev);
-static int fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev);
-#ifdef	CONFIG_USE_MDIO
-static void fec_enet_mii(struct net_device *dev);
-#endif	/* CONFIG_USE_MDIO */
-#ifdef CONFIG_FEC_PACKETHOOK
-static void  fec_enet_tx(struct net_device *dev, __u32 regval);
-static void  fec_enet_rx(struct net_device *dev, __u32 regval);
-#else
-static void  fec_enet_tx(struct net_device *dev);
-static void  fec_enet_rx(struct net_device *dev);
-#endif
-static int fec_enet_close(struct net_device *dev);
-static struct net_device_stats *fec_enet_get_stats(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-static void fec_restart(struct net_device *dev, int duplex);
-static void fec_stop(struct net_device *dev);
-static	ushort	my_enet_addr[3];
-
-#ifdef	CONFIG_USE_MDIO
-/* MII processing.  We keep this as simple as possible.  Requests are
- * placed on the list (if there is room).  When the request is finished
- * by the MII, an optional function may be called.
- */
-typedef struct mii_list {
-	uint	mii_regval;
-	void	(*mii_func)(uint val, struct net_device *dev);
-	struct	mii_list *mii_next;
-} mii_list_t;
-
-#define		NMII	20
-mii_list_t	mii_cmds[NMII];
-mii_list_t	*mii_free;
-mii_list_t	*mii_head;
-mii_list_t	*mii_tail;
-
-static int	mii_queue(struct net_device *dev, int request,
-				void (*func)(uint, struct net_device *));
-
-/* Make MII read/write commands for the FEC.
-*/
-#define mk_mii_read(REG)	(0x60020000 | ((REG & 0x1f) << 18))
-#define mk_mii_write(REG, VAL)	(0x50020000 | ((REG & 0x1f) << 18) | \
-						(VAL & 0xffff))
-#define mk_mii_end	0
-#endif	/* CONFIG_USE_MDIO */
-
-/* Transmitter timeout.
-*/
-#define TX_TIMEOUT (2*HZ)
-
-#ifdef	CONFIG_USE_MDIO
-/* Register definitions for the PHY.
-*/
-
-#define MII_REG_CR          0  /* Control Register                         */
-#define MII_REG_SR          1  /* Status Register                          */
-#define MII_REG_PHYIR1      2  /* PHY Identification Register 1            */
-#define MII_REG_PHYIR2      3  /* PHY Identification Register 2            */
-#define MII_REG_ANAR        4  /* A-N Advertisement Register               */
-#define MII_REG_ANLPAR      5  /* A-N Link Partner Ability Register        */
-#define MII_REG_ANER        6  /* A-N Expansion Register                   */
-#define MII_REG_ANNPTR      7  /* A-N Next Page Transmit Register          */
-#define MII_REG_ANLPRNPR    8  /* A-N Link Partner Received Next Page Reg. */
-
-/* values for phy_status */
-
-#define PHY_CONF_ANE	0x0001  /* 1 auto-negotiation enabled */
-#define PHY_CONF_LOOP	0x0002  /* 1 loopback mode enabled */
-#define PHY_CONF_SPMASK	0x00f0  /* mask for speed */
-#define PHY_CONF_10HDX	0x0010  /* 10 Mbit half duplex supported */
-#define PHY_CONF_10FDX	0x0020  /* 10 Mbit full duplex supported */
-#define PHY_CONF_100HDX	0x0040  /* 100 Mbit half duplex supported */
-#define PHY_CONF_100FDX	0x0080  /* 100 Mbit full duplex supported */
-
-#define PHY_STAT_LINK	0x0100  /* 1 up - 0 down */
-#define PHY_STAT_FAULT	0x0200  /* 1 remote fault */
-#define PHY_STAT_ANC	0x0400  /* 1 auto-negotiation complete	*/
-#define PHY_STAT_SPMASK	0xf000  /* mask for speed */
-#define PHY_STAT_10HDX	0x1000  /* 10 Mbit half duplex selected	*/
-#define PHY_STAT_10FDX	0x2000  /* 10 Mbit full duplex selected	*/
-#define PHY_STAT_100HDX	0x4000  /* 100 Mbit half duplex selected */
-#define PHY_STAT_100FDX	0x8000  /* 100 Mbit full duplex selected */
-#endif	/* CONFIG_USE_MDIO */
-
-#ifdef CONFIG_FEC_PACKETHOOK
-int
-fec_register_ph(struct net_device *dev, fec_ph_func *rxfun, fec_ph_func *txfun,
-		__u16 proto, volatile __u32 *regaddr, void *priv)
-{
-	struct fec_enet_private *fep;
-	int retval = 0;
-
-	fep = dev->priv;
-
-	if (test_and_set_bit(0, (void*)&fep->ph_lock) != 0) {
-		/* Someone is messing with the packet hook */
-		return -EAGAIN;
-	}
-	if (fep->ph_rxhandler != NULL || fep->ph_txhandler != NULL) {
-		retval = -EBUSY;
-		goto out;
-	}
-	fep->ph_rxhandler = rxfun;
-	fep->ph_txhandler = txfun;
-	fep->ph_proto = proto;
-	fep->ph_regaddr = regaddr;
-	fep->ph_priv = priv;
-
-	out:
-	fep->ph_lock = 0;
-
-	return retval;
-}
-
-
-int
-fec_unregister_ph(struct net_device *dev)
-{
-	struct fec_enet_private *fep;
-	int retval = 0;
-
-	fep = dev->priv;
-
-	if (test_and_set_bit(0, (void*)&fep->ph_lock) != 0) {
-		/* Someone is messing with the packet hook */
-		return -EAGAIN;
-	}
-
-	fep->ph_rxhandler = fep->ph_txhandler = NULL;
-	fep->ph_proto = 0;
-	fep->ph_regaddr = NULL;
-	fep->ph_priv = NULL;
-
-	fep->ph_lock = 0;
-
-	return retval;
-}
-
-EXPORT_SYMBOL(fec_register_ph);
-EXPORT_SYMBOL(fec_unregister_ph);
-
-#endif /* CONFIG_FEC_PACKETHOOK */
-
-static int
-fec_enet_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
-	struct fec_enet_private *fep;
-	volatile fec_t	*fecp;
-	volatile cbd_t	*bdp;
-
-	fep = dev->priv;
-	fecp = (volatile fec_t*)dev->base_addr;
-
-	if (!fep->link) {
-		/* Link is down or autonegotiation is in progress. */
-		return 1;
-	}
-
-	/* Fill in a Tx ring entry */
-	bdp = fep->cur_tx;
-
-#ifndef final_version
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		/* Ooops.  All transmit buffers are full.  Bail out.
-		 * This should not happen, since dev->tbusy should be set.
-		 */
-		printk("%s: tx queue full!.\n", dev->name);
-		return 1;
-	}
-#endif
-
-	/* Clear all of the status flags.
-	 */
-	bdp->cbd_sc &= ~BD_ENET_TX_STATS;
-
-	/* Set buffer length and buffer pointer.
-	*/
-	bdp->cbd_bufaddr = __pa(skb->data);
-	bdp->cbd_datlen = skb->len;
-
-	/* Save skb pointer.
-	*/
-	fep->tx_skbuff[fep->skb_cur] = skb;
-
-	fep->stats.tx_bytes += skb->len;
-	fep->skb_cur = (fep->skb_cur+1) & TX_RING_MOD_MASK;
-
-	/* Push the data cache so the CPM does not get stale memory
-	 * data.
-	 */
-	flush_dcache_range((unsigned long)skb->data,
-			   (unsigned long)skb->data + skb->len);
-
-	/* disable interrupts while triggering transmit */
-	spin_lock_irq(&fep->lock);
-
-	/* Send it on its way.  Tell FEC its ready, interrupt when done,
-	 * its the last BD of the frame, and to put the CRC on the end.
-	 */
-
-	bdp->cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_INTR
-			| BD_ENET_TX_LAST | BD_ENET_TX_TC);
-
-	dev->trans_start = jiffies;
-
-	/* Trigger transmission start */
-	fecp->fec_x_des_active = 0x01000000;
-
-	/* If this was the last BD in the ring, start at the beginning again.
-	*/
-	if (bdp->cbd_sc & BD_ENET_TX_WRAP) {
-		bdp = fep->tx_bd_base;
-	} else {
-		bdp++;
-	}
-
-	if (bdp->cbd_sc & BD_ENET_TX_READY) {
-		netif_stop_queue(dev);
-		fep->tx_full = 1;
-	}
-
-	fep->cur_tx = (cbd_t *)bdp;
-
-	spin_unlock_irq(&fep->lock);
-
-	return 0;
-}
-
-static void
-fec_timeout(struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-
-	printk("%s: transmit timed out.\n", dev->name);
-	fep->stats.tx_errors++;
-#ifndef final_version
-	{
-	int	i;
-	cbd_t	*bdp;
-
-	printk("Ring data dump: cur_tx %lx%s, dirty_tx %lx cur_rx: %lx\n",
-	       (unsigned long)fep->cur_tx, fep->tx_full ? " (full)" : "",
-	       (unsigned long)fep->dirty_tx,
-	       (unsigned long)fep->cur_rx);
-
-	bdp = fep->tx_bd_base;
-	printk(" tx: %u buffers\n",  TX_RING_SIZE);
-	for (i = 0 ; i < TX_RING_SIZE; i++) {
-		printk("  %08x: %04x %04x %08x\n",
-		       (uint) bdp,
-		       bdp->cbd_sc,
-		       bdp->cbd_datlen,
-		       bdp->cbd_bufaddr);
-		bdp++;
-	}
-
-	bdp = fep->rx_bd_base;
-	printk(" rx: %lu buffers\n",  RX_RING_SIZE);
-	for (i = 0 ; i < RX_RING_SIZE; i++) {
-		printk("  %08x: %04x %04x %08x\n",
-		       (uint) bdp,
-		       bdp->cbd_sc,
-		       bdp->cbd_datlen,
-		       bdp->cbd_bufaddr);
-		bdp++;
-	}
-	}
-#endif
-	if (!fep->tx_full)
-		netif_wake_queue(dev);
-}
-
-/* The interrupt handler.
- * This is called from the MPC core interrupt.
- */
-static	irqreturn_t
-fec_enet_interrupt(int irq, void *dev_id)
-{
-	struct	net_device *dev = dev_id;
-	volatile fec_t	*fecp;
-	uint	int_events;
-#ifdef CONFIG_FEC_PACKETHOOK
-	struct	fec_enet_private *fep = dev->priv;
-	__u32 regval;
-
-	if (fep->ph_regaddr) regval = *fep->ph_regaddr;
-#endif
-	fecp = (volatile fec_t*)dev->base_addr;
-
-	/* Get the interrupt events that caused us to be here.
-	*/
-	while ((int_events = fecp->fec_ievent) != 0) {
-		fecp->fec_ievent = int_events;
-		if ((int_events & (FEC_ENET_HBERR | FEC_ENET_BABR |
-				   FEC_ENET_BABT | FEC_ENET_EBERR)) != 0) {
-			printk("FEC ERROR %x\n", int_events);
-		}
-
-		/* Handle receive event in its own function.
-		 */
-		if (int_events & FEC_ENET_RXF) {
-#ifdef CONFIG_FEC_PACKETHOOK
-			fec_enet_rx(dev, regval);
-#else
-			fec_enet_rx(dev);
-#endif
-		}
-
-		/* Transmit OK, or non-fatal error. Update the buffer
-		   descriptors. FEC handles all errors, we just discover
-		   them as part of the transmit process.
-		*/
-		if (int_events & FEC_ENET_TXF) {
-#ifdef CONFIG_FEC_PACKETHOOK
-			fec_enet_tx(dev, regval);
-#else
-			fec_enet_tx(dev);
-#endif
-		}
-
-		if (int_events & FEC_ENET_MII) {
-#ifdef	CONFIG_USE_MDIO
-			fec_enet_mii(dev);
-#else
-printk("%s[%d] %s: unexpected FEC_ENET_MII event\n", __FILE__, __LINE__, __func__);
-#endif	/* CONFIG_USE_MDIO */
-		}
-
-	}
-	return IRQ_RETVAL(IRQ_HANDLED);
-}
-
-
-static void
-#ifdef CONFIG_FEC_PACKETHOOK
-fec_enet_tx(struct net_device *dev, __u32 regval)
-#else
-fec_enet_tx(struct net_device *dev)
-#endif
-{
-	struct	fec_enet_private *fep;
-	volatile cbd_t	*bdp;
-	struct	sk_buff	*skb;
-
-	fep = dev->priv;
-	/* lock while transmitting */
-	spin_lock(&fep->lock);
-	bdp = fep->dirty_tx;
-
-	while ((bdp->cbd_sc&BD_ENET_TX_READY) == 0) {
-		if (bdp == fep->cur_tx && fep->tx_full == 0) break;
-
-		skb = fep->tx_skbuff[fep->skb_dirty];
-		/* Check for errors. */
-		if (bdp->cbd_sc & (BD_ENET_TX_HB | BD_ENET_TX_LC |
-				   BD_ENET_TX_RL | BD_ENET_TX_UN |
-				   BD_ENET_TX_CSL)) {
-			fep->stats.tx_errors++;
-			if (bdp->cbd_sc & BD_ENET_TX_HB)  /* No heartbeat */
-				fep->stats.tx_heartbeat_errors++;
-			if (bdp->cbd_sc & BD_ENET_TX_LC)  /* Late collision */
-				fep->stats.tx_window_errors++;
-			if (bdp->cbd_sc & BD_ENET_TX_RL)  /* Retrans limit */
-				fep->stats.tx_aborted_errors++;
-			if (bdp->cbd_sc & BD_ENET_TX_UN)  /* Underrun */
-				fep->stats.tx_fifo_errors++;
-			if (bdp->cbd_sc & BD_ENET_TX_CSL) /* Carrier lost */
-				fep->stats.tx_carrier_errors++;
-		} else {
-#ifdef CONFIG_FEC_PACKETHOOK
-			/* Packet hook ... */
-			if (fep->ph_txhandler &&
-			    ((struct ethhdr *)skb->data)->h_proto
-			    == fep->ph_proto) {
-				fep->ph_txhandler((__u8*)skb->data, skb->len,
-						  regval, fep->ph_priv);
-			}
-#endif
-			fep->stats.tx_packets++;
-		}
-
-#ifndef final_version
-		if (bdp->cbd_sc & BD_ENET_TX_READY)
-			printk("HEY! Enet xmit interrupt and TX_READY.\n");
-#endif
-		/* Deferred means some collisions occurred during transmit,
-		 * but we eventually sent the packet OK.
-		 */
-		if (bdp->cbd_sc & BD_ENET_TX_DEF)
-			fep->stats.collisions++;
-
-		/* Free the sk buffer associated with this last transmit.
-		 */
-#if 0
-printk("TXI: %x %x %x\n", bdp, skb, fep->skb_dirty);
-#endif
-		dev_kfree_skb_irq (skb/*, FREE_WRITE*/);
-		fep->tx_skbuff[fep->skb_dirty] = NULL;
-		fep->skb_dirty = (fep->skb_dirty + 1) & TX_RING_MOD_MASK;
-
-		/* Update pointer to next buffer descriptor to be transmitted.
-		 */
-		if (bdp->cbd_sc & BD_ENET_TX_WRAP)
-			bdp = fep->tx_bd_base;
-		else
-			bdp++;
-
-		/* Since we have freed up a buffer, the ring is no longer
-		 * full.
-		 */
-		if (fep->tx_full) {
-			fep->tx_full = 0;
-			if (netif_queue_stopped(dev))
-				netif_wake_queue(dev);
-		}
-#ifdef CONFIG_FEC_PACKETHOOK
-		/* Re-read register. Not exactly guaranteed to be correct,
-		   but... */
-		if (fep->ph_regaddr) regval = *fep->ph_regaddr;
-#endif
-	}
-	fep->dirty_tx = (cbd_t *)bdp;
-	spin_unlock(&fep->lock);
-}
-
-
-/* During a receive, the cur_rx points to the current incoming buffer.
- * When we update through the ring, if the next incoming buffer has
- * not been given to the system, we just set the empty indicator,
- * effectively tossing the packet.
- */
-static void
-#ifdef CONFIG_FEC_PACKETHOOK
-fec_enet_rx(struct net_device *dev, __u32 regval)
-#else
-fec_enet_rx(struct net_device *dev)
-#endif
-{
-	struct	fec_enet_private *fep;
-	volatile fec_t	*fecp;
-	volatile cbd_t *bdp;
-	struct	sk_buff	*skb;
-	ushort	pkt_len;
-	__u8 *data;
-
-	fep = dev->priv;
-	fecp = (volatile fec_t*)dev->base_addr;
-
-	/* First, grab all of the stats for the incoming packet.
-	 * These get messed up if we get called due to a busy condition.
-	 */
-	bdp = fep->cur_rx;
-
-while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) {
-
-#ifndef final_version
-	/* Since we have allocated space to hold a complete frame,
-	 * the last indicator should be set.
-	 */
-	if ((bdp->cbd_sc & BD_ENET_RX_LAST) == 0)
-		printk("FEC ENET: rcv is not +last\n");
-#endif
-
-	/* Check for errors. */
-	if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH | BD_ENET_RX_NO |
-			   BD_ENET_RX_CR | BD_ENET_RX_OV)) {
-		fep->stats.rx_errors++;
-		if (bdp->cbd_sc & (BD_ENET_RX_LG | BD_ENET_RX_SH)) {
-		/* Frame too long or too short. */
-			fep->stats.rx_length_errors++;
-		}
-		if (bdp->cbd_sc & BD_ENET_RX_NO)	/* Frame alignment */
-			fep->stats.rx_frame_errors++;
-		if (bdp->cbd_sc & BD_ENET_RX_CR)	/* CRC Error */
-			fep->stats.rx_crc_errors++;
-		if (bdp->cbd_sc & BD_ENET_RX_OV)	/* FIFO overrun */
-			fep->stats.rx_crc_errors++;
-	}
-
-	/* Report late collisions as a frame error.
-	 * On this error, the BD is closed, but we don't know what we
-	 * have in the buffer.  So, just drop this frame on the floor.
-	 */
-	if (bdp->cbd_sc & BD_ENET_RX_CL) {
-		fep->stats.rx_errors++;
-		fep->stats.rx_frame_errors++;
-		goto rx_processing_done;
-	}
-
-	/* Process the incoming frame.
-	 */
-	fep->stats.rx_packets++;
-	pkt_len = bdp->cbd_datlen;
-	fep->stats.rx_bytes += pkt_len;
-	data = fep->rx_vaddr[bdp - fep->rx_bd_base];
-
-#ifdef CONFIG_FEC_PACKETHOOK
-	/* Packet hook ... */
-	if (fep->ph_rxhandler) {
-		if (((struct ethhdr *)data)->h_proto == fep->ph_proto) {
-			switch (fep->ph_rxhandler(data, pkt_len, regval,
-						  fep->ph_priv)) {
-			case 1:
-				goto rx_processing_done;
-				break;
-			case 0:
-				break;
-			default:
-				fep->stats.rx_errors++;
-				goto rx_processing_done;
-			}
-		}
-	}
-
-	/* If it wasn't filtered - copy it to an sk buffer. */
-#endif
-
-	/* This does 16 byte alignment, exactly what we need.
-	 * The packet length includes FCS, but we don't want to
-	 * include that when passing upstream as it messes up
-	 * bridging applications.
-	 */
-	skb = dev_alloc_skb(pkt_len-4);
-
-	if (skb == NULL) {
-		printk("%s: Memory squeeze, dropping packet.\n", dev->name);
-		fep->stats.rx_dropped++;
-	} else {
-		skb_put(skb,pkt_len-4);	/* Make room */
-		skb_copy_to_linear_data(skb, data, pkt_len-4);
-		skb->protocol=eth_type_trans(skb,dev);
-		netif_rx(skb);
-	}
-  rx_processing_done:
-
-	/* Clear the status flags for this buffer.
-	*/
-	bdp->cbd_sc &= ~BD_ENET_RX_STATS;
-
-	/* Mark the buffer empty.
-	*/
-	bdp->cbd_sc |= BD_ENET_RX_EMPTY;
-
-	/* Update BD pointer to next entry.
-	*/
-	if (bdp->cbd_sc & BD_ENET_RX_WRAP)
-		bdp = fep->rx_bd_base;
-	else
-		bdp++;
-
-#if 1
-	/* Doing this here will keep the FEC running while we process
-	 * incoming frames.  On a heavily loaded network, we should be
-	 * able to keep up at the expense of system resources.
-	 */
-	fecp->fec_r_des_active = 0x01000000;
-#endif
-#ifdef CONFIG_FEC_PACKETHOOK
-	/* Re-read register. Not exactly guaranteed to be correct,
-	   but... */
-	if (fep->ph_regaddr) regval = *fep->ph_regaddr;
-#endif
-   } /* while (!(bdp->cbd_sc & BD_ENET_RX_EMPTY)) */
-	fep->cur_rx = (cbd_t *)bdp;
-
-#if 0
-	/* Doing this here will allow us to process all frames in the
-	 * ring before the FEC is allowed to put more there.  On a heavily
-	 * loaded network, some frames may be lost.  Unfortunately, this
-	 * increases the interrupt overhead since we can potentially work
-	 * our way back to the interrupt return only to come right back
-	 * here.
-	 */
-	fecp->fec_r_des_active = 0x01000000;
-#endif
-}
-
-
-#ifdef	CONFIG_USE_MDIO
-static void
-fec_enet_mii(struct net_device *dev)
-{
-	struct	fec_enet_private *fep;
-	volatile fec_t	*ep;
-	mii_list_t	*mip;
-	uint		mii_reg;
-
-	fep = (struct fec_enet_private *)dev->priv;
-	ep = &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec);
-	mii_reg = ep->fec_mii_data;
-
-	if ((mip = mii_head) == NULL) {
-		printk("MII and no head!\n");
-		return;
-	}
-
-	if (mip->mii_func != NULL)
-		(*(mip->mii_func))(mii_reg, dev);
-
-	mii_head = mip->mii_next;
-	mip->mii_next = mii_free;
-	mii_free = mip;
-
-	if ((mip = mii_head) != NULL) {
-		ep->fec_mii_data = mip->mii_regval;
-
-	}
-}
-
-static int
-mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_device *))
-{
-	struct fec_enet_private *fep;
-	unsigned long	flags;
-	mii_list_t	*mip;
-	int		retval;
-
-	/* Add PHY address to register command.
-	*/
-	fep = dev->priv;
-	regval |= fep->phy_addr << 23;
-
-	retval = 0;
-
-	/* lock while modifying mii_list */
-	spin_lock_irqsave(&fep->lock, flags);
-
-	if ((mip = mii_free) != NULL) {
-		mii_free = mip->mii_next;
-		mip->mii_regval = regval;
-		mip->mii_func = func;
-		mip->mii_next = NULL;
-		if (mii_head) {
-			mii_tail->mii_next = mip;
-			mii_tail = mip;
-		} else {
-			mii_head = mii_tail = mip;
-			(&(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec))->fec_mii_data = regval;
-		}
-	} else {
-		retval = 1;
-	}
-
-	spin_unlock_irqrestore(&fep->lock, flags);
-
-	return(retval);
-}
-
-static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c)
-{
-	int k;
-
-	if(!c)
-		return;
-
-	for(k = 0; (c+k)->mii_data != mk_mii_end; k++)
-		mii_queue(dev, (c+k)->mii_data, (c+k)->funct);
-}
-
-static void mii_parse_sr(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_STAT_LINK | PHY_STAT_FAULT | PHY_STAT_ANC);
-
-	if (mii_reg & 0x0004)
-		*s |= PHY_STAT_LINK;
-	if (mii_reg & 0x0010)
-		*s |= PHY_STAT_FAULT;
-	if (mii_reg & 0x0020)
-		*s |= PHY_STAT_ANC;
-
-	fep->link = (*s & PHY_STAT_LINK) ? 1 : 0;
-}
-
-static void mii_parse_cr(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_CONF_ANE | PHY_CONF_LOOP);
-
-	if (mii_reg & 0x1000)
-		*s |= PHY_CONF_ANE;
-	if (mii_reg & 0x4000)
-		*s |= PHY_CONF_LOOP;
-}
-
-static void mii_parse_anar(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_CONF_SPMASK);
-
-	if (mii_reg & 0x0020)
-		*s |= PHY_CONF_10HDX;
-	if (mii_reg & 0x0040)
-		*s |= PHY_CONF_10FDX;
-	if (mii_reg & 0x0080)
-		*s |= PHY_CONF_100HDX;
-	if (mii_reg & 0x00100)
-		*s |= PHY_CONF_100FDX;
-}
-#if 0
-static void mii_disp_reg(uint mii_reg, struct net_device *dev)
-{
-	printk("reg %u = 0x%04x\n", (mii_reg >> 18) & 0x1f, mii_reg & 0xffff);
-}
-#endif
-
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT970 is used by many boards				     */
-
-#ifdef CONFIG_FEC_LXT970
-
-#define MII_LXT970_MIRROR    16  /* Mirror register           */
-#define MII_LXT970_IER       17  /* Interrupt Enable Register */
-#define MII_LXT970_ISR       18  /* Interrupt Status Register */
-#define MII_LXT970_CONFIG    19  /* Configuration Register    */
-#define MII_LXT970_CSR       20  /* Chip Status Register      */
-
-static void mii_parse_lxt970_csr(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_STAT_SPMASK);
-
-	if (mii_reg & 0x0800) {
-		if (mii_reg & 0x1000)
-			*s |= PHY_STAT_100FDX;
-		else
-			*s |= PHY_STAT_100HDX;
-	}
-	else {
-		if (mii_reg & 0x1000)
-			*s |= PHY_STAT_10FDX;
-		else
-			*s |= PHY_STAT_10HDX;
-	}
-}
-
-static phy_info_t phy_info_lxt970 = {
-	0x07810000,
-	"LXT970",
-
-	(const phy_cmd_t []) {  /* config */
-#if 0
-//		{ mk_mii_write(MII_REG_ANAR, 0x0021), NULL },
-
-		/* Set default operation of 100-TX....for some reason
-		 * some of these bits are set on power up, which is wrong.
-		 */
-		{ mk_mii_write(MII_LXT970_CONFIG, 0), NULL },
-#endif
-		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
-		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_LXT970_IER, 0x0002), NULL },
-		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* read SR and ISR to acknowledge */
-
-		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
-		{ mk_mii_read(MII_LXT970_ISR), NULL },
-
-		/* find out the current status */
-
-		{ mk_mii_read(MII_LXT970_CSR), mii_parse_lxt970_csr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_LXT970_IER, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FEC_LXT970 */
-
-/* ------------------------------------------------------------------------- */
-/* The Level one LXT971 is used on some of my custom boards                  */
-
-#ifdef CONFIG_FEC_LXT971
-
-/* register definitions for the 971 */
-
-#define MII_LXT971_PCR       16  /* Port Control Register     */
-#define MII_LXT971_SR2       17  /* Status Register 2         */
-#define MII_LXT971_IER       18  /* Interrupt Enable Register */
-#define MII_LXT971_ISR       19  /* Interrupt Status Register */
-#define MII_LXT971_LCR       20  /* LED Control Register      */
-#define MII_LXT971_TCR       30  /* Transmit Control Register */
-
-/*
- * I had some nice ideas of running the MDIO faster...
- * The 971 should support 8MHz and I tried it, but things acted really
- * weird, so 2.5 MHz ought to be enough for anyone...
- */
-
-static void mii_parse_lxt971_sr2(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_STAT_SPMASK);
-
-	if (mii_reg & 0x4000) {
-		if (mii_reg & 0x0200)
-			*s |= PHY_STAT_100FDX;
-		else
-			*s |= PHY_STAT_100HDX;
-	}
-	else {
-		if (mii_reg & 0x0200)
-			*s |= PHY_STAT_10FDX;
-		else
-			*s |= PHY_STAT_10HDX;
-	}
-	if (mii_reg & 0x0008)
-		*s |= PHY_STAT_FAULT;
-}
-
-static phy_info_t phy_info_lxt971 = {
-	0x0001378e,
-	"LXT971",
-
-	(const phy_cmd_t []) {  /* config */
-//		{ mk_mii_write(MII_REG_ANAR, 0x021), NULL }, /* 10  Mbps, HD */
-		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
-		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_LXT971_IER, 0x00f2), NULL },
-		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
-
-		/* Somehow does the 971 tell me that the link is down
-		 * the first read after power-up.
-		 * read here to get a valid value in ack_int */
-
-		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* find out the current status */
-
-		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
-		{ mk_mii_read(MII_LXT971_SR2), mii_parse_lxt971_sr2 },
-
-		/* we only need to read ISR to acknowledge */
-
-		{ mk_mii_read(MII_LXT971_ISR), NULL },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_LXT971_IER, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FEC_LXT970 */
-
-
-/* ------------------------------------------------------------------------- */
-/* The Quality Semiconductor QS6612 is used on the RPX CLLF                  */
-
-#ifdef CONFIG_FEC_QS6612
-
-/* register definitions */
-
-#define MII_QS6612_MCR       17  /* Mode Control Register      */
-#define MII_QS6612_FTR       27  /* Factory Test Register      */
-#define MII_QS6612_MCO       28  /* Misc. Control Register     */
-#define MII_QS6612_ISR       29  /* Interrupt Source Register  */
-#define MII_QS6612_IMR       30  /* Interrupt Mask Register    */
-#define MII_QS6612_PCR       31  /* 100BaseTx PHY Control Reg. */
-
-static void mii_parse_qs6612_pcr(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	*s &= ~(PHY_STAT_SPMASK);
-
-	switch((mii_reg >> 2) & 7) {
-	case 1: *s |= PHY_STAT_10HDX; break;
-	case 2: *s |= PHY_STAT_100HDX; break;
-	case 5: *s |= PHY_STAT_10FDX; break;
-	case 6: *s |= PHY_STAT_100FDX; break;
-	}
-}
-
-static phy_info_t phy_info_qs6612 = {
-	0x00181440,
-	"QS6612",
-
-	(const phy_cmd_t []) {  /* config */
-//	{ mk_mii_write(MII_REG_ANAR, 0x061), NULL }, /* 10  Mbps */
-
-		/* The PHY powers up isolated on the RPX,
-		 * so send a command to allow operation.
-		 */
-
-		{ mk_mii_write(MII_QS6612_PCR, 0x0dc0), NULL },
-
-		/* parse cr and anar to get some info */
-
-		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
-		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_QS6612_IMR, 0x003a), NULL },
-		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-
-		/* we need to read ISR, SR and ANER to acknowledge */
-
-		{ mk_mii_read(MII_QS6612_ISR), NULL },
-		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
-		{ mk_mii_read(MII_REG_ANER), NULL },
-
-		/* read pcr to get info */
-
-		{ mk_mii_read(MII_QS6612_PCR), mii_parse_qs6612_pcr },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_QS6612_IMR, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FEC_QS6612 */
-
-/* ------------------------------------------------------------------------- */
-/* The Advanced Micro Devices AM79C874 is used on the ICU862		     */
-
-#ifdef CONFIG_FEC_AM79C874
-
-/* register definitions for the 79C874 */
-
-#define MII_AM79C874_MFR	16  /* Miscellaneous Features Register      */
-#define MII_AM79C874_ICSR	17  /* Interrupt Control/Status Register    */
-#define MII_AM79C874_DR		18  /* Diagnostic Register		    */
-#define MII_AM79C874_PMLR	19  /* Power Management & Loopback Register */
-#define MII_AM79C874_MCR	21  /* Mode Control Register		    */
-#define MII_AM79C874_DC		23  /* Disconnect Counter		    */
-#define MII_AM79C874_REC	24  /* Receiver Error Counter		    */
-
-static void mii_parse_amd79c874_dr(uint mii_reg, struct net_device *dev, uint data)
-{
-	volatile struct fec_enet_private *fep = dev->priv;
-	uint s = fep->phy_status;
-
-	s &= ~(PHY_STAT_SPMASK);
-
-	/* Register 18: Bit 10 is data rate, 11 is Duplex */
-	switch ((mii_reg >> 10) & 3) {
-	case 0:	s |= PHY_STAT_10HDX;	break;
-	case 1:	s |= PHY_STAT_100HDX;	break;
-	case 2:	s |= PHY_STAT_10FDX;	break;
-	case 3:	s |= PHY_STAT_100FDX;	break;
-	}
-
-	fep->phy_status = s;
-}
-
-static phy_info_t phy_info_amd79c874 = {
-	0x00022561,
-	"AM79C874",
-
-	(const phy_cmd_t []) {  /* config */
-//		{ mk_mii_write(MII_REG_ANAR, 0x021), NULL }, /* 10  Mbps, HD */
-		{ mk_mii_read(MII_REG_CR), mii_parse_cr },
-		{ mk_mii_read(MII_REG_ANAR), mii_parse_anar },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* startup - enable interrupts */
-		{ mk_mii_write(MII_AM79C874_ICSR, 0xff00), NULL },
-		{ mk_mii_write(MII_REG_CR, 0x1200), NULL }, /* autonegotiate */
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) { /* ack_int */
-		/* find out the current status */
-
-		{ mk_mii_read(MII_REG_SR), mii_parse_sr },
-		{ mk_mii_read(MII_AM79C874_DR), mii_parse_amd79c874_dr },
-
-		/* we only need to read ICSR to acknowledge */
-
-		{ mk_mii_read(MII_AM79C874_ICSR), NULL },
-		{ mk_mii_end, }
-	},
-	(const phy_cmd_t []) {  /* shutdown - disable interrupts */
-		{ mk_mii_write(MII_AM79C874_ICSR, 0x0000), NULL },
-		{ mk_mii_end, }
-	},
-};
-
-#endif /* CONFIG_FEC_AM79C874 */
-
-static phy_info_t *phy_info[] = {
-
-#ifdef CONFIG_FEC_LXT970
-	&phy_info_lxt970,
-#endif /* CONFIG_FEC_LXT970 */
-
-#ifdef CONFIG_FEC_LXT971
-	&phy_info_lxt971,
-#endif /* CONFIG_FEC_LXT971 */
-
-#ifdef CONFIG_FEC_QS6612
-	&phy_info_qs6612,
-#endif /* CONFIG_FEC_QS6612 */
-
-#ifdef CONFIG_FEC_AM79C874
-	&phy_info_amd79c874,
-#endif /* CONFIG_FEC_AM79C874 */
-
-	NULL
-};
-
-static void mii_display_status(struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-	volatile uint *s = &(fep->phy_status);
-
-	if (!fep->link && !fep->old_link) {
-		/* Link is still down - don't print anything */
-		return;
-	}
-
-	printk("%s: status: ", dev->name);
-
-	if (!fep->link) {
-		printk("link down");
-	} else {
-		printk("link up");
-
-		switch(*s & PHY_STAT_SPMASK) {
-		case PHY_STAT_100FDX: printk(", 100 Mbps Full Duplex"); break;
-		case PHY_STAT_100HDX: printk(", 100 Mbps Half Duplex"); break;
-		case PHY_STAT_10FDX: printk(", 10 Mbps Full Duplex"); break;
-		case PHY_STAT_10HDX: printk(", 10 Mbps Half Duplex"); break;
-		default:
-			printk(", Unknown speed/duplex");
-		}
-
-		if (*s & PHY_STAT_ANC)
-			printk(", auto-negotiation complete");
-	}
-
-	if (*s & PHY_STAT_FAULT)
-		printk(", remote fault");
-
-	printk(".\n");
-}
-
-static void mii_display_config(struct work_struct *work)
-{
-	struct fec_enet_private *fep =
-		container_of(work, struct fec_enet_private, phy_task);
-	struct net_device *dev = fep->dev;
-	volatile uint *s = &(fep->phy_status);
-
-	printk("%s: config: auto-negotiation ", dev->name);
-
-	if (*s & PHY_CONF_ANE)
-		printk("on");
-	else
-		printk("off");
-
-	if (*s & PHY_CONF_100FDX)
-		printk(", 100FDX");
-	if (*s & PHY_CONF_100HDX)
-		printk(", 100HDX");
-	if (*s & PHY_CONF_10FDX)
-		printk(", 10FDX");
-	if (*s & PHY_CONF_10HDX)
-		printk(", 10HDX");
-	if (!(*s & PHY_CONF_SPMASK))
-		printk(", No speed/duplex selected?");
-
-	if (*s & PHY_CONF_LOOP)
-		printk(", loopback enabled");
-
-	printk(".\n");
-
-	fep->sequence_done = 1;
-}
-
-static void mii_relink(struct work_struct *work)
-{
-	struct fec_enet_private *fep =
-		container_of(work, struct fec_enet_private, phy_task);
-	struct net_device *dev = fep->dev;
-	int duplex;
-
-	fep->link = (fep->phy_status & PHY_STAT_LINK) ? 1 : 0;
-	mii_display_status(dev);
-	fep->old_link = fep->link;
-
-	if (fep->link) {
-		duplex = 0;
-		if (fep->phy_status
-		    & (PHY_STAT_100FDX | PHY_STAT_10FDX))
-			duplex = 1;
-		fec_restart(dev, duplex);
-	}
-	else
-		fec_stop(dev);
-
-#if 0
-	enable_irq(fep->mii_irq);
-#endif
-
-}
-
-static void mii_queue_relink(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-
-	fep->dev = dev;
-	INIT_WORK(&fep->phy_task, mii_relink);
-	schedule_work(&fep->phy_task);
-}
-
-static void mii_queue_config(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-
-	fep->dev = dev;
-	INIT_WORK(&fep->phy_task, mii_display_config);
-	schedule_work(&fep->phy_task);
-}
-
-
-
-phy_cmd_t phy_cmd_relink[] = { { mk_mii_read(MII_REG_CR), mii_queue_relink },
-			       { mk_mii_end, } };
-phy_cmd_t phy_cmd_config[] = { { mk_mii_read(MII_REG_CR), mii_queue_config },
-			       { mk_mii_end, } };
-
-
-
-/* Read remainder of PHY ID.
-*/
-static void
-mii_discover_phy3(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep;
-	int	i;
-
-	fep = dev->priv;
-	fep->phy_id |= (mii_reg & 0xffff);
-
-	for(i = 0; phy_info[i]; i++)
-		if(phy_info[i]->id == (fep->phy_id >> 4))
-			break;
-
-	if(!phy_info[i])
-		panic("%s: PHY id 0x%08x is not supported!\n",
-		      dev->name, fep->phy_id);
-
-	fep->phy = phy_info[i];
-	fep->phy_id_done = 1;
-
-	printk("%s: Phy @ 0x%x, type %s (0x%08x)\n",
-		dev->name, fep->phy_addr, fep->phy->name, fep->phy_id);
-}
-
-/* Scan all of the MII PHY addresses looking for someone to respond
- * with a valid ID.  This usually happens quickly.
- */
-static void
-mii_discover_phy(uint mii_reg, struct net_device *dev)
-{
-	struct fec_enet_private *fep;
-	uint	phytype;
-
-	fep = dev->priv;
-
-	if ((phytype = (mii_reg & 0xffff)) != 0xffff) {
-
-		/* Got first part of ID, now get remainder.
-		*/
-		fep->phy_id = phytype << 16;
-		mii_queue(dev, mk_mii_read(MII_REG_PHYIR2), mii_discover_phy3);
-	} else {
-		fep->phy_addr++;
-		if (fep->phy_addr < 32) {
-			mii_queue(dev, mk_mii_read(MII_REG_PHYIR1),
-							mii_discover_phy);
-		} else {
-			printk("fec: No PHY device found.\n");
-		}
-	}
-}
-#endif	/* CONFIG_USE_MDIO */
-
-/* This interrupt occurs when the PHY detects a link change.
-*/
-static
-#ifdef CONFIG_RPXCLASSIC
-void mii_link_interrupt(void *dev_id)
-#else
-irqreturn_t mii_link_interrupt(int irq, void * dev_id)
-#endif
-{
-#ifdef	CONFIG_USE_MDIO
-	struct	net_device *dev = dev_id;
-	struct fec_enet_private *fep = dev->priv;
-	volatile immap_t *immap = (immap_t *)IMAP_ADDR;
-	volatile fec_t *fecp = &(immap->im_cpm.cp_fec);
-	unsigned int ecntrl = fecp->fec_ecntrl;
-
-	/* We need the FEC enabled to access the MII
-	*/
-	if ((ecntrl & FEC_ECNTRL_ETHER_EN) == 0) {
-		fecp->fec_ecntrl |= FEC_ECNTRL_ETHER_EN;
-	}
-#endif	/* CONFIG_USE_MDIO */
-
-#if 0
-	disable_irq(fep->mii_irq);  /* disable now, enable later */
-#endif
-
-
-#ifdef	CONFIG_USE_MDIO
-	mii_do_cmd(dev, fep->phy->ack_int);
-	mii_do_cmd(dev, phy_cmd_relink);  /* restart and display status */
-
-	if ((ecntrl & FEC_ECNTRL_ETHER_EN) == 0) {
-		fecp->fec_ecntrl = ecntrl;	/* restore old settings */
-	}
-#else
-printk("%s[%d] %s: unexpected Link interrupt\n", __FILE__, __LINE__, __func__);
-#endif	/* CONFIG_USE_MDIO */
-
-#ifndef CONFIG_RPXCLASSIC
-	return IRQ_RETVAL(IRQ_HANDLED);
-#endif	/* CONFIG_RPXCLASSIC */
-}
-
-static int
-fec_enet_open(struct net_device *dev)
-{
-	struct fec_enet_private *fep = dev->priv;
-
-	/* I should reset the ring buffers here, but I don't yet know
-	 * a simple way to do that.
-	 */
-
-#ifdef	CONFIG_USE_MDIO
-	fep->sequence_done = 0;
-	fep->link = 0;
-
-	if (fep->phy) {
-		mii_do_cmd(dev, fep->phy->ack_int);
-		mii_do_cmd(dev, fep->phy->config);
-		mii_do_cmd(dev, phy_cmd_config);  /* display configuration */
-		while(!fep->sequence_done)
-			schedule();
-
-		mii_do_cmd(dev, fep->phy->startup);
-		netif_start_queue(dev);
-		return 0;		/* Success */
-	}
-	return -ENODEV;		/* No PHY we understand */
-#else
-	fep->link = 1;
-	netif_start_queue(dev);
-	return 0;	/* Success */
-#endif	/* CONFIG_USE_MDIO */
-
-}
-
-static int
-fec_enet_close(struct net_device *dev)
-{
-	/* Don't know what to do yet.
-	*/
-	netif_stop_queue(dev);
-	fec_stop(dev);
-
-	return 0;
-}
-
-static struct net_device_stats *fec_enet_get_stats(struct net_device *dev)
-{
-	struct fec_enet_private *fep = (struct fec_enet_private *)dev->priv;
-
-	return &fep->stats;
-}
-
-/* Set or clear the multicast filter for this adaptor.
- * Skeleton taken from sunlance driver.
- * The CPM Ethernet implementation allows Multicast as well as individual
- * MAC address filtering.  Some of the drivers check to make sure it is
- * a group multicast address, and discard those that are not.  I guess I
- * will do the same for now, but just remove the test if you want
- * individual filtering as well (do the upper net layers want or support
- * this kind of feature?).
- */
-
-static void set_multicast_list(struct net_device *dev)
-{
-	struct	fec_enet_private *fep;
-	volatile fec_t *ep;
-
-	fep = (struct fec_enet_private *)dev->priv;
-	ep = &(((immap_t *)IMAP_ADDR)->im_cpm.cp_fec);
-
-	if (dev->flags&IFF_PROMISC) {
-
-		/* Log any net taps. */
-		printk("%s: Promiscuous mode enabled.\n", dev->name);
-		ep->fec_r_cntrl |= FEC_RCNTRL_PROM;
-	} else {
-
-		ep->fec_r_cntrl &= ~FEC_RCNTRL_PROM;
-
-		if (dev->flags & IFF_ALLMULTI) {
-			/* Catch all multicast addresses, so set the
-			 * filter to all 1's.
-			 */
-			ep->fec_hash_table_high = 0xffffffff;
-			ep->fec_hash_table_low = 0xffffffff;
-		}
-#if 0
-		else {
-			/* Clear filter and add the addresses in the list.
-			*/
-			ep->sen_gaddr1 = 0;
-			ep->sen_gaddr2 = 0;
-			ep->sen_gaddr3 = 0;
-			ep->sen_gaddr4 = 0;
-
-			dmi = dev->mc_list;
-
-			for (i=0; i<dev->mc_count; i++) {
-
-				/* Only support group multicast for now.
-				*/
-				if (!(dmi->dmi_addr[0] & 1))
-					continue;
-
-				/* The address in dmi_addr is LSB first,
-				 * and taddr is MSB first.  We have to
-				 * copy bytes MSB first from dmi_addr.
-				 */
-				mcptr = (u_char *)dmi->dmi_addr + 5;
-				tdptr = (u_char *)&ep->sen_taddrh;
-				for (j=0; j<6; j++)
-					*tdptr++ = *mcptr--;
-
-				/* Ask CPM to run CRC and set bit in
-				 * filter mask.
-				 */
-				cpmp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SCC1, CPM_CR_SET_GADDR) | CPM_CR_FLG;
-				/* this delay is necessary here -- Cort */
-				udelay(10);
-				while (cpmp->cp_cpcr & CPM_CR_FLG);
-			}
-		}
-#endif
-	}
-}
-
-/* Initialize the FEC Ethernet on 860T.
- */
-static int __init fec_enet_init(void)
-{
-	struct net_device *dev;
-	struct fec_enet_private *fep;
-	int i, j, k, err;
-	unsigned char	*eap, *iap, *ba;
-	dma_addr_t	mem_addr;
-	volatile	cbd_t	*bdp;
-	cbd_t		*cbd_base;
-	volatile	immap_t	*immap;
-	volatile	fec_t	*fecp;
-	bd_t		*bd;
-#ifdef CONFIG_SCC_ENET
-	unsigned char	tmpaddr[6];
-#endif
-
-	immap = (immap_t *)IMAP_ADDR;	/* pointer to internal registers */
-
-	bd = (bd_t *)__res;
-
-	dev = alloc_etherdev(sizeof(*fep));
-	if (!dev)
-		return -ENOMEM;
-
-	fep = dev->priv;
-
-	fecp = &(immap->im_cpm.cp_fec);
-
-	/* Whack a reset.  We should wait for this.
-	*/
-	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
-	for (i = 0;
-	     (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
-	     ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printk ("FEC Reset timeout!\n");
-	}
-
-	/* Set the Ethernet address.  If using multiple Enets on the 8xx,
-	 * this needs some work to get unique addresses.
-	 */
-	eap = (unsigned char *)my_enet_addr;
-	iap = bd->bi_enetaddr;
-
-#ifdef CONFIG_SCC_ENET
-	/*
-         * If a board has Ethernet configured both on a SCC and the
-         * FEC, it needs (at least) 2 MAC addresses (we know that Sun
-         * disagrees, but anyway). For the FEC port, we create
-         * another address by setting one of the address bits above
-         * something that would have (up to now) been allocated.
-	 */
-	for (i=0; i<6; i++)
-		tmpaddr[i] = *iap++;
-	tmpaddr[3] |= 0x80;
-	iap = tmpaddr;
-#endif
-
-	for (i=0; i<6; i++) {
-		dev->dev_addr[i] = *eap++ = *iap++;
-	}
-
-	/* Allocate memory for buffer descriptors.
-	*/
-	if (((RX_RING_SIZE + TX_RING_SIZE) * sizeof(cbd_t)) > PAGE_SIZE) {
-		printk("FEC init error.  Need more space.\n");
-		printk("FEC initialization failed.\n");
-		return 1;
-	}
-	cbd_base = (cbd_t *)dma_alloc_coherent(dev->class_dev.dev, PAGE_SIZE,
-					       &mem_addr, GFP_KERNEL);
-
-	/* Set receive and transmit descriptor base.
-	*/
-	fep->rx_bd_base = cbd_base;
-	fep->tx_bd_base = cbd_base + RX_RING_SIZE;
-
-	fep->skb_cur = fep->skb_dirty = 0;
-
-	/* Initialize the receive buffer descriptors.
-	*/
-	bdp = fep->rx_bd_base;
-	k = 0;
-	for (i=0; i<FEC_ENET_RX_PAGES; i++) {
-
-		/* Allocate a page.
-		*/
-		ba = (unsigned char *)dma_alloc_coherent(dev->class_dev.dev,
-							 PAGE_SIZE,
-							 &mem_addr,
-							 GFP_KERNEL);
-		/* BUG: no check for failure */
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		for (j=0; j<FEC_ENET_RX_FRPPG; j++) {
-			bdp->cbd_sc = BD_ENET_RX_EMPTY;
-			bdp->cbd_bufaddr = mem_addr;
-			fep->rx_vaddr[k++] = ba;
-			mem_addr += FEC_ENET_RX_FRSIZE;
-			ba += FEC_ENET_RX_FRSIZE;
-			bdp++;
-		}
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-#ifdef CONFIG_FEC_PACKETHOOK
-	fep->ph_lock = 0;
-	fep->ph_rxhandler = fep->ph_txhandler = NULL;
-	fep->ph_proto = 0;
-	fep->ph_regaddr = NULL;
-	fep->ph_priv = NULL;
-#endif
-
-	/* Install our interrupt handler.
-	*/
-	if (request_irq(FEC_INTERRUPT, fec_enet_interrupt, 0, "fec", dev) != 0)
-		panic("Could not allocate FEC IRQ!");
-
-#ifdef CONFIG_RPXCLASSIC
-	/* Make Port C, bit 15 an input that causes interrupts.
-	*/
-	immap->im_ioport.iop_pcpar &= ~0x0001;
-	immap->im_ioport.iop_pcdir &= ~0x0001;
-	immap->im_ioport.iop_pcso  &= ~0x0001;
-	immap->im_ioport.iop_pcint |=  0x0001;
-	cpm_install_handler(CPMVEC_PIO_PC15, mii_link_interrupt, dev);
-
-	/* Make LEDS reflect Link status.
-	*/
-	*((uint *) RPX_CSR_ADDR) &= ~BCSR2_FETHLEDMODE;
-#endif
-
-#ifdef PHY_INTERRUPT
-	((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel |=
-		(0x80000000 >> PHY_INTERRUPT);
-
-	if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0, "mii", dev) != 0)
-		panic("Could not allocate MII IRQ!");
-#endif
-
-	dev->base_addr = (unsigned long)fecp;
-
-	/* The FEC Ethernet specific entries in the device structure. */
-	dev->open = fec_enet_open;
-	dev->hard_start_xmit = fec_enet_start_xmit;
-	dev->tx_timeout = fec_timeout;
-	dev->watchdog_timeo = TX_TIMEOUT;
-	dev->stop = fec_enet_close;
-	dev->get_stats = fec_enet_get_stats;
-	dev->set_multicast_list = set_multicast_list;
-
-#ifdef	CONFIG_USE_MDIO
-	for (i=0; i<NMII-1; i++)
-		mii_cmds[i].mii_next = &mii_cmds[i+1];
-	mii_free = mii_cmds;
-#endif	/* CONFIG_USE_MDIO */
-
-	/* Configure all of port D for MII.
-	*/
-	immap->im_ioport.iop_pdpar = 0x1fff;
-
-	/* Bits moved from Rev. D onward.
-	*/
-	if ((mfspr(SPRN_IMMR) & 0xffff) < 0x0501)
-		immap->im_ioport.iop_pddir = 0x1c58;	/* Pre rev. D */
-	else
-		immap->im_ioport.iop_pddir = 0x1fff;	/* Rev. D and later */
-
-#ifdef	CONFIG_USE_MDIO
-	/* Set MII speed to 2.5 MHz
-	*/
-	fecp->fec_mii_speed = fep->phy_speed =
-		(( (bd->bi_intfreq + 500000) / 2500000 / 2 ) & 0x3F ) << 1;
-#else
-	fecp->fec_mii_speed = 0;	/* turn off MDIO */
-#endif	/* CONFIG_USE_MDIO */
-
-	err = register_netdev(dev);
-	if (err) {
-		free_netdev(dev);
-		return err;
-	}
-
-	printk ("%s: FEC ENET Version 0.2, FEC irq %d"
-#ifdef PHY_INTERRUPT
-		", MII irq %d"
-#endif
-		", addr ",
-		dev->name, FEC_INTERRUPT
-#ifdef PHY_INTERRUPT
-		, PHY_INTERRUPT
-#endif
-	);
-	for (i=0; i<6; i++)
-		printk("%02x%c", dev->dev_addr[i], (i==5) ? '\n' : ':');
-
-#ifdef	CONFIG_USE_MDIO	/* start in full duplex mode, and negotiate speed */
-	fec_restart (dev, 1);
-#else			/* always use half duplex mode only */
-	fec_restart (dev, 0);
-#endif
-
-#ifdef	CONFIG_USE_MDIO
-	/* Queue up command to detect the PHY and initialize the
-	 * remainder of the interface.
-	 */
-	fep->phy_id_done = 0;
-	fep->phy_addr = 0;
-	mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy);
-#endif	/* CONFIG_USE_MDIO */
-
-	return 0;
-}
-module_init(fec_enet_init);
-
-/* This function is called to start or restart the FEC during a link
- * change.  This only happens when switching between half and full
- * duplex.
- */
-static void
-fec_restart(struct net_device *dev, int duplex)
-{
-	struct fec_enet_private *fep;
-	int i;
-	volatile	cbd_t	*bdp;
-	volatile	immap_t	*immap;
-	volatile	fec_t	*fecp;
-
-	immap = (immap_t *)IMAP_ADDR;	/* pointer to internal registers */
-
-	fecp = &(immap->im_cpm.cp_fec);
-
-	fep = dev->priv;
-
-	/* Whack a reset.  We should wait for this.
-	*/
-	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
-	for (i = 0;
-	     (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
-	     ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printk ("FEC Reset timeout!\n");
-	}
-
-	/* Set station address.
-	*/
-	fecp->fec_addr_low  = (my_enet_addr[0] << 16) | my_enet_addr[1];
-	fecp->fec_addr_high =  my_enet_addr[2];
-
-	/* Reset all multicast.
-	*/
-	fecp->fec_hash_table_high = 0;
-	fecp->fec_hash_table_low  = 0;
-
-	/* Set maximum receive buffer size.
-	*/
-	fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
-	fecp->fec_r_hash = PKT_MAXBUF_SIZE;
-
-	/* Set receive and transmit descriptor base.
-	*/
-	fecp->fec_r_des_start = iopa((uint)(fep->rx_bd_base));
-	fecp->fec_x_des_start = iopa((uint)(fep->tx_bd_base));
-
-	fep->dirty_tx = fep->cur_tx = fep->tx_bd_base;
-	fep->cur_rx = fep->rx_bd_base;
-
-	/* Reset SKB transmit buffers.
-	*/
-	fep->skb_cur = fep->skb_dirty = 0;
-	for (i=0; i<=TX_RING_MOD_MASK; i++) {
-		if (fep->tx_skbuff[i] != NULL) {
-			dev_kfree_skb(fep->tx_skbuff[i]);
-			fep->tx_skbuff[i] = NULL;
-		}
-	}
-
-	/* Initialize the receive buffer descriptors.
-	*/
-	bdp = fep->rx_bd_base;
-	for (i=0; i<RX_RING_SIZE; i++) {
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		bdp->cbd_sc = BD_ENET_RX_EMPTY;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* ...and the same for transmit.
-	*/
-	bdp = fep->tx_bd_base;
-	for (i=0; i<TX_RING_SIZE; i++) {
-
-		/* Initialize the BD for every fragment in the page.
-		*/
-		bdp->cbd_sc = 0;
-		bdp->cbd_bufaddr = 0;
-		bdp++;
-	}
-
-	/* Set the last buffer to wrap.
-	*/
-	bdp--;
-	bdp->cbd_sc |= BD_SC_WRAP;
-
-	/* Enable MII mode.
-	*/
-	if (duplex) {
-		fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;	/* MII enable */
-		fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;		/* FD enable */
-	}
-	else {
-		fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
-		fecp->fec_x_cntrl = 0;
-	}
-	fep->full_duplex = duplex;
-
-	/* Enable big endian and don't care about SDMA FC.
-	*/
-	fecp->fec_fun_code = 0x78000000;
-
-#ifdef	CONFIG_USE_MDIO
-	/* Set MII speed.
-	*/
-	fecp->fec_mii_speed = fep->phy_speed;
-#endif	/* CONFIG_USE_MDIO */
-
-	/* Clear any outstanding interrupt.
-	*/
-	fecp->fec_ievent = 0xffc0;
-
-	fecp->fec_ivec = (FEC_INTERRUPT/2) << 29;
-
-	/* Enable interrupts we wish to service.
-	*/
-	fecp->fec_imask = ( FEC_ENET_TXF | FEC_ENET_TXB |
-			    FEC_ENET_RXF | FEC_ENET_RXB | FEC_ENET_MII );
-
-	/* And last, enable the transmit and receive processing.
-	*/
-	fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
-	fecp->fec_r_des_active = 0x01000000;
-}
-
-static void
-fec_stop(struct net_device *dev)
-{
-	volatile	immap_t	*immap;
-	volatile	fec_t	*fecp;
-	struct fec_enet_private *fep;
-	int i;
-
-	immap = (immap_t *)IMAP_ADDR;	/* pointer to internal registers */
-
-	fecp = &(immap->im_cpm.cp_fec);
-
-	if ((fecp->fec_ecntrl & FEC_ECNTRL_ETHER_EN) == 0)
-		return;	/* already down */
-
-	fep = dev->priv;
-
-
-	fecp->fec_x_cntrl = 0x01;	/* Graceful transmit stop */
-
-	for (i = 0;
-	     ((fecp->fec_ievent & 0x10000000) == 0) && (i < FEC_RESET_DELAY);
-	     ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printk ("FEC timeout on graceful transmit stop\n");
-	}
-
-	/* Clear outstanding MII command interrupts.
-	*/
-	fecp->fec_ievent = FEC_ENET_MII;
-
-	/* Enable MII command finished interrupt
-	*/
-	fecp->fec_ivec = (FEC_INTERRUPT/2) << 29;
-	fecp->fec_imask = FEC_ENET_MII;
-
-#ifdef	CONFIG_USE_MDIO
-	/* Set MII speed.
-	*/
-	fecp->fec_mii_speed = fep->phy_speed;
-#endif	/* CONFIG_USE_MDIO */
-
-	/* Disable FEC
-	*/
-	fecp->fec_ecntrl &= ~(FEC_ECNTRL_ETHER_EN);
-}
diff --git a/arch/ppc/8xx_io/micropatch.c b/arch/ppc/8xx_io/micropatch.c
deleted file mode 100644
index 9a5d95da7c28..000000000000
--- a/arch/ppc/8xx_io/micropatch.c
+++ /dev/null
@@ -1,743 +0,0 @@
-
-/* Microcode patches for the CPM as supplied by Motorola.
- * This is the one for IIC/SPI.  There is a newer one that
- * also relocates SMC2, but this would require additional changes
- * to uart.c, so I am holding off on that for a moment.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/mpc8xx.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/8xx_immap.h>
-#include <asm/cpm1.h>
-
-/*
- * I2C/SPI relocation patch arrays.
- */
-
-#ifdef CONFIG_I2C_SPI_UCODE_PATCH
-
-uint patch_2000[] = {
-	0x7FFFEFD9,
-	0x3FFD0000,
-	0x7FFB49F7,
-	0x7FF90000,
-	0x5FEFADF7,
-	0x5F89ADF7,
-	0x5FEFAFF7,
-	0x5F89AFF7,
-	0x3A9CFBC8,
-	0xE7C0EDF0,
-	0x77C1E1BB,
-	0xF4DC7F1D,
-	0xABAD932F,
-	0x4E08FDCF,
-	0x6E0FAFF8,
-	0x7CCF76CF,
-	0xFD1FF9CF,
-	0xABF88DC6,
-	0xAB5679F7,
-	0xB0937383,
-	0xDFCE79F7,
-	0xB091E6BB,
-	0xE5BBE74F,
-	0xB3FA6F0F,
-	0x6FFB76CE,
-	0xEE0DF9CF,
-	0x2BFBEFEF,
-	0xCFEEF9CF,
-	0x76CEAD24,
-	0x90B2DF9A,
-	0x7FDDD0BF,
-	0x4BF847FD,
-	0x7CCF76CE,
-	0xCFEF7E1F,
-	0x7F1D7DFD,
-	0xF0B6EF71,
-	0x7FC177C1,
-	0xFBC86079,
-	0xE722FBC8,
-	0x5FFFDFFF,
-	0x5FB2FFFB,
-	0xFBC8F3C8,
-	0x94A67F01,
-	0x7F1D5F39,
-	0xAFE85F5E,
-	0xFFDFDF96,
-	0xCB9FAF7D,
-	0x5FC1AFED,
-	0x8C1C5FC1,
-	0xAFDD5FC3,
-	0xDF9A7EFD,
-	0xB0B25FB2,
-	0xFFFEABAD,
-	0x5FB2FFFE,
-	0x5FCE600B,
-	0xE6BB600B,
-	0x5FCEDFC6,
-	0x27FBEFDF,
-	0x5FC8CFDE,
-	0x3A9CE7C0,
-	0xEDF0F3C8,
-	0x7F0154CD,
-	0x7F1D2D3D,
-	0x363A7570,
-	0x7E0AF1CE,
-	0x37EF2E68,
-	0x7FEE10EC,
-	0xADF8EFDE,
-	0xCFEAE52F,
-	0x7D0FE12B,
-	0xF1CE5F65,
-	0x7E0A4DF8,
-	0xCFEA5F72,
-	0x7D0BEFEE,
-	0xCFEA5F74,
-	0xE522EFDE,
-	0x5F74CFDA,
-	0x0B627385,
-	0xDF627E0A,
-	0x30D8145B,
-	0xBFFFF3C8,
-	0x5FFFDFFF,
-	0xA7F85F5E,
-	0xBFFE7F7D,
-	0x10D31450,
-	0x5F36BFFF,
-	0xAF785F5E,
-	0xBFFDA7F8,
-	0x5F36BFFE,
-	0x77FD30C0,
-	0x4E08FDCF,
-	0xE5FF6E0F,
-	0xAFF87E1F,
-	0x7E0FFD1F,
-	0xF1CF5F1B,
-	0xABF80D5E,
-	0x5F5EFFEF,
-	0x79F730A2,
-	0xAFDD5F34,
-	0x47F85F34,
-	0xAFED7FDD,
-	0x50B24978,
-	0x47FD7F1D,
-	0x7DFD70AD,
-	0xEF717EC1,
-	0x6BA47F01,
-	0x2D267EFD,
-	0x30DE5F5E,
-	0xFFFD5F5E,
-	0xFFEF5F5E,
-	0xFFDF0CA0,
-	0xAFED0A9E,
-	0xAFDD0C3A,
-	0x5F3AAFBD,
-	0x7FBDB082,
-	0x5F8247F8
-};
-
-uint patch_2f00[] = {
-	0x3E303430,
-	0x34343737,
-	0xABF7BF9B,
-	0x994B4FBD,
-	0xBD599493,
-	0x349FFF37,
-	0xFB9B177D,
-	0xD9936956,
-	0xBBFDD697,
-	0xBDD2FD11,
-	0x31DB9BB3,
-	0x63139637,
-	0x93733693,
-	0x193137F7,
-	0x331737AF,
-	0x7BB9B999,
-	0xBB197957,
-	0x7FDFD3D5,
-	0x73B773F7,
-	0x37933B99,
-	0x1D115316,
-	0x99315315,
-	0x31694BF4,
-	0xFBDBD359,
-	0x31497353,
-	0x76956D69,
-	0x7B9D9693,
-	0x13131979,
-	0x79376935
-};
-#endif
-
-/*
- * I2C/SPI/SMC1 relocation patch arrays.
- */
-
-#ifdef CONFIG_I2C_SPI_SMC1_UCODE_PATCH
-
-uint patch_2000[] = {
-	0x3fff0000,
-	0x3ffd0000,
-	0x3ffb0000,
-	0x3ff90000,
-	0x5f13eff8,
-	0x5eb5eff8,
-	0x5f88adf7,
-	0x5fefadf7,
-	0x3a9cfbc8,
-	0x77cae1bb,
-	0xf4de7fad,
-	0xabae9330,
-	0x4e08fdcf,
-	0x6e0faff8,
-	0x7ccf76cf,
-	0xfdaff9cf,
-	0xabf88dc8,
-	0xab5879f7,
-	0xb0925d8d,
-	0xdfd079f7,
-	0xb090e6bb,
-	0xe5bbe74f,
-	0x9e046f0f,
-	0x6ffb76ce,
-	0xee0cf9cf,
-	0x2bfbefef,
-	0xcfeef9cf,
-	0x76cead23,
-	0x90b3df99,
-	0x7fddd0c1,
-	0x4bf847fd,
-	0x7ccf76ce,
-	0xcfef77ca,
-	0x7eaf7fad,
-	0x7dfdf0b7,
-	0xef7a7fca,
-	0x77cafbc8,
-	0x6079e722,
-	0xfbc85fff,
-	0xdfff5fb3,
-	0xfffbfbc8,
-	0xf3c894a5,
-	0xe7c9edf9,
-	0x7f9a7fad,
-	0x5f36afe8,
-	0x5f5bffdf,
-	0xdf95cb9e,
-	0xaf7d5fc3,
-	0xafed8c1b,
-	0x5fc3afdd,
-	0x5fc5df99,
-	0x7efdb0b3,
-	0x5fb3fffe,
-	0xabae5fb3,
-	0xfffe5fd0,
-	0x600be6bb,
-	0x600b5fd0,
-	0xdfc827fb,
-	0xefdf5fca,
-	0xcfde3a9c,
-	0xe7c9edf9,
-	0xf3c87f9e,
-	0x54ca7fed,
-	0x2d3a3637,
-	0x756f7e9a,
-	0xf1ce37ef,
-	0x2e677fee,
-	0x10ebadf8,
-	0xefdecfea,
-	0xe52f7d9f,
-	0xe12bf1ce,
-	0x5f647e9a,
-	0x4df8cfea,
-	0x5f717d9b,
-	0xefeecfea,
-	0x5f73e522,
-	0xefde5f73,
-	0xcfda0b61,
-	0x5d8fdf61,
-	0xe7c9edf9,
-	0x7e9a30d5,
-	0x1458bfff,
-	0xf3c85fff,
-	0xdfffa7f8,
-	0x5f5bbffe,
-	0x7f7d10d0,
-	0x144d5f33,
-	0xbfffaf78,
-	0x5f5bbffd,
-	0xa7f85f33,
-	0xbffe77fd,
-	0x30bd4e08,
-	0xfdcfe5ff,
-	0x6e0faff8,
-	0x7eef7e9f,
-	0xfdeff1cf,
-	0x5f17abf8,
-	0x0d5b5f5b,
-	0xffef79f7,
-	0x309eafdd,
-	0x5f3147f8,
-	0x5f31afed,
-	0x7fdd50af,
-	0x497847fd,
-	0x7f9e7fed,
-	0x7dfd70a9,
-	0xef7e7ece,
-	0x6ba07f9e,
-	0x2d227efd,
-	0x30db5f5b,
-	0xfffd5f5b,
-	0xffef5f5b,
-	0xffdf0c9c,
-	0xafed0a9a,
-	0xafdd0c37,
-	0x5f37afbd,
-	0x7fbdb081,
-	0x5f8147f8,
-	0x3a11e710,
-	0xedf0ccdd,
-	0xf3186d0a,
-	0x7f0e5f06,
-	0x7fedbb38,
-	0x3afe7468,
-	0x7fedf4fc,
-	0x8ffbb951,
-	0xb85f77fd,
-	0xb0df5ddd,
-	0xdefe7fed,
-	0x90e1e74d,
-	0x6f0dcbf7,
-	0xe7decfed,
-	0xcb74cfed,
-	0xcfeddf6d,
-	0x91714f74,
-	0x5dd2deef,
-	0x9e04e7df,
-	0xefbb6ffb,
-	0xe7ef7f0e,
-	0x9e097fed,
-	0xebdbeffa,
-	0xeb54affb,
-	0x7fea90d7,
-	0x7e0cf0c3,
-	0xbffff318,
-	0x5fffdfff,
-	0xac59efea,
-	0x7fce1ee5,
-	0xe2ff5ee1,
-	0xaffbe2ff,
-	0x5ee3affb,
-	0xf9cc7d0f,
-	0xaef8770f,
-	0x7d0fb0c6,
-	0xeffbbfff,
-	0xcfef5ede,
-	0x7d0fbfff,
-	0x5ede4cf8,
-	0x7fddd0bf,
-	0x49f847fd,
-	0x7efdf0bb,
-	0x7fedfffd,
-	0x7dfdf0b7,
-	0xef7e7e1e,
-	0x5ede7f0e,
-	0x3a11e710,
-	0xedf0ccab,
-	0xfb18ad2e,
-	0x1ea9bbb8,
-	0x74283b7e,
-	0x73c2e4bb,
-	0x2ada4fb8,
-	0xdc21e4bb,
-	0xb2a1ffbf,
-	0x5e2c43f8,
-	0xfc87e1bb,
-	0xe74ffd91,
-	0x6f0f4fe8,
-	0xc7ba32e2,
-	0xf396efeb,
-	0x600b4f78,
-	0xe5bb760b,
-	0x53acaef8,
-	0x4ef88b0e,
-	0xcfef9e09,
-	0xabf8751f,
-	0xefef5bac,
-	0x741f4fe8,
-	0x751e760d,
-	0x7fdbf081,
-	0x741cafce,
-	0xefcc7fce,
-	0x751e70ac,
-	0x741ce7bb,
-	0x3372cfed,
-	0xafdbefeb,
-	0xe5bb760b,
-	0x53f2aef8,
-	0xafe8e7eb,
-	0x4bf8771e,
-	0x7e247fed,
-	0x4fcbe2cc,
-	0x7fbc30a9,
-	0x7b0f7a0f,
-	0x34d577fd,
-	0x308b5db7,
-	0xde553e5f,
-	0xaf78741f,
-	0x741f30f0,
-	0xcfef5e2c,
-	0x741f3eac,
-	0xafb8771e,
-	0x5e677fed,
-	0x0bd3e2cc,
-	0x741ccfec,
-	0xe5ca53cd,
-	0x6fcb4f74,
-	0x5dadde4b,
-	0x2ab63d38,
-	0x4bb3de30,
-	0x751f741c,
-	0x6c42effa,
-	0xefea7fce,
-	0x6ffc30be,
-	0xefec3fca,
-	0x30b3de2e,
-	0xadf85d9e,
-	0xaf7daefd,
-	0x5d9ede2e,
-	0x5d9eafdd,
-	0x761f10ac,
-	0x1da07efd,
-	0x30adfffe,
-	0x4908fb18,
-	0x5fffdfff,
-	0xafbb709b,
-	0x4ef85e67,
-	0xadf814ad,
-	0x7a0f70ad,
-	0xcfef50ad,
-	0x7a0fde30,
-	0x5da0afed,
-	0x3c12780f,
-	0xefef780f,
-	0xefef790f,
-	0xa7f85e0f,
-	0xffef790f,
-	0xefef790f,
-	0x14adde2e,
-	0x5d9eadfd,
-	0x5e2dfffb,
-	0xe79addfd,
-	0xeff96079,
-	0x607ae79a,
-	0xddfceff9,
-	0x60795dff,
-	0x607acfef,
-	0xefefefdf,
-	0xefbfef7f,
-	0xeeffedff,
-	0xebffe7ff,
-	0xafefafdf,
-	0xafbfaf7f,
-	0xaeffadff,
-	0xabffa7ff,
-	0x6fef6fdf,
-	0x6fbf6f7f,
-	0x6eff6dff,
-	0x6bff67ff,
-	0x2fef2fdf,
-	0x2fbf2f7f,
-	0x2eff2dff,
-	0x2bff27ff,
-	0x4e08fd1f,
-	0xe5ff6e0f,
-	0xaff87eef,
-	0x7e0ffdef,
-	0xf11f6079,
-	0xabf8f542,
-	0x7e0af11c,
-	0x37cfae3a,
-	0x7fec90be,
-	0xadf8efdc,
-	0xcfeae52f,
-	0x7d0fe12b,
-	0xf11c6079,
-	0x7e0a4df8,
-	0xcfea5dc4,
-	0x7d0befec,
-	0xcfea5dc6,
-	0xe522efdc,
-	0x5dc6cfda,
-	0x4e08fd1f,
-	0x6e0faff8,
-	0x7c1f761f,
-	0xfdeff91f,
-	0x6079abf8,
-	0x761cee24,
-	0xf91f2bfb,
-	0xefefcfec,
-	0xf91f6079,
-	0x761c27fb,
-	0xefdf5da7,
-	0xcfdc7fdd,
-	0xd09c4bf8,
-	0x47fd7c1f,
-	0x761ccfcf,
-	0x7eef7fed,
-	0x7dfdf093,
-	0xef7e7f1e,
-	0x771efb18,
-	0x6079e722,
-	0xe6bbe5bb,
-	0xae0ae5bb,
-	0x600bae85,
-	0xe2bbe2bb,
-	0xe2bbe2bb,
-	0xaf02e2bb,
-	0xe2bb2ff9,
-	0x6079e2bb
-};
-
-uint patch_2f00[] = {
-	0x30303030,
-	0x3e3e3434,
-	0xabbf9b99,
-	0x4b4fbdbd,
-	0x59949334,
-	0x9fff37fb,
-	0x9b177dd9,
-	0x936956bb,
-	0xfbdd697b,
-	0xdd2fd113,
-	0x1db9f7bb,
-	0x36313963,
-	0x79373369,
-	0x3193137f,
-	0x7331737a,
-	0xf7bb9b99,
-	0x9bb19795,
-	0x77fdfd3d,
-	0x573b773f,
-	0x737933f7,
-	0xb991d115,
-	0x31699315,
-	0x31531694,
-	0xbf4fbdbd,
-	0x35931497,
-	0x35376956,
-	0xbd697b9d,
-	0x96931313,
-	0x19797937,
-	0x6935af78,
-	0xb9b3baa3,
-	0xb8788683,
-	0x368f78f7,
-	0x87778733,
-	0x3ffffb3b,
-	0x8e8f78b8,
-	0x1d118e13,
-	0xf3ff3f8b,
-	0x6bd8e173,
-	0xd1366856,
-	0x68d1687b,
-	0x3daf78b8,
-	0x3a3a3f87,
-	0x8f81378f,
-	0xf876f887,
-	0x77fd8778,
-	0x737de8d6,
-	0xbbf8bfff,
-	0xd8df87f7,
-	0xfd876f7b,
-	0x8bfff8bd,
-	0x8683387d,
-	0xb873d87b,
-	0x3b8fd7f8,
-	0xf7338883,
-	0xbb8ee1f8,
-	0xef837377,
-	0x3337b836,
-	0x817d11f8,
-	0x7378b878,
-	0xd3368b7d,
-	0xed731b7d,
-	0x833731f3,
-	0xf22f3f23
-};
-
-uint patch_2e00[] = {
-	0x27eeeeee,
-	0xeeeeeeee,
-	0xeeeeeeee,
-	0xeeeeeeee,
-	0xee4bf4fb,
-	0xdbd259bb,
-	0x1979577f,
-	0xdfd2d573,
-	0xb773f737,
-	0x4b4fbdbd,
-	0x25b9b177,
-	0xd2d17376,
-	0x956bbfdd,
-	0x697bdd2f,
-	0xff9f79ff,
-	0xff9ff22f
-};
-#endif
-
-/*
- *  USB SOF patch arrays.
- */
-
-#ifdef CONFIG_USB_SOF_UCODE_PATCH
-
-uint patch_2000[] = {
-	0x7fff0000,
-	0x7ffd0000,
-	0x7ffb0000,
-	0x49f7ba5b,
-	0xba383ffb,
-	0xf9b8b46d,
-	0xe5ab4e07,
-	0xaf77bffe,
-	0x3f7bbf79,
-	0xba5bba38,
-	0xe7676076,
-	0x60750000
-};
-
-uint patch_2f00[] = {
-	0x3030304c,
-	0xcab9e441,
-	0xa1aaf220
-};
-#endif
-
-void
-cpm_load_patch(volatile immap_t *immr)
-{
-	volatile uint		*dp;		/* Dual-ported RAM. */
-	volatile cpm8xx_t	*commproc;
-	volatile iic_t		*iip;
-	volatile spi_t		*spp;
-	volatile smc_uart_t	*smp;
-	int	i;
-
-	commproc = (cpm8xx_t *)&immr->im_cpm;
-
-#ifdef CONFIG_USB_SOF_UCODE_PATCH
-	commproc->cp_rccr = 0;
-
-	dp = (uint *)(commproc->cp_dpmem);
-	for (i=0; i<(sizeof(patch_2000)/4); i++)
-		*dp++ = patch_2000[i];
-
-	dp = (uint *)&(commproc->cp_dpmem[0x0f00]);
-	for (i=0; i<(sizeof(patch_2f00)/4); i++)
-		*dp++ = patch_2f00[i];
-
-	commproc->cp_rccr = 0x0009;
-
-	printk("USB SOF microcode patch installed\n");
-#endif /* CONFIG_USB_SOF_UCODE_PATCH */
-
-#if defined(CONFIG_I2C_SPI_UCODE_PATCH) || \
-    defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
-
-	commproc->cp_rccr = 0;
-
-	dp = (uint *)(commproc->cp_dpmem);
-	for (i=0; i<(sizeof(patch_2000)/4); i++)
-		*dp++ = patch_2000[i];
-
-	dp = (uint *)&(commproc->cp_dpmem[0x0f00]);
-	for (i=0; i<(sizeof(patch_2f00)/4); i++)
-		*dp++ = patch_2f00[i];
-
-	iip = (iic_t *)&commproc->cp_dparam[PROFF_IIC];
-# define RPBASE 0x0500
-	iip->iic_rpbase = RPBASE;
-
-	/* Put SPI above the IIC, also 32-byte aligned.
-	*/
-	i = (RPBASE + sizeof(iic_t) + 31) & ~31;
-	spp = (spi_t *)&commproc->cp_dparam[PROFF_SPI];
-	spp->spi_rpbase = i;
-
-# if defined(CONFIG_I2C_SPI_UCODE_PATCH)
-	commproc->cp_cpmcr1 = 0x802a;
-	commproc->cp_cpmcr2 = 0x8028;
-	commproc->cp_cpmcr3 = 0x802e;
-	commproc->cp_cpmcr4 = 0x802c;
-	commproc->cp_rccr = 1;
-
-	printk("I2C/SPI microcode patch installed.\n");
-# endif /* CONFIG_I2C_SPI_UCODE_PATCH */
-
-# if defined(CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
-
-	dp = (uint *)&(commproc->cp_dpmem[0x0e00]);
-	for (i=0; i<(sizeof(patch_2e00)/4); i++)
-		*dp++ = patch_2e00[i];
-
-	commproc->cp_cpmcr1 = 0x8080;
-	commproc->cp_cpmcr2 = 0x808a;
-	commproc->cp_cpmcr3 = 0x8028;
-	commproc->cp_cpmcr4 = 0x802a;
-	commproc->cp_rccr = 3;
-
-	smp = (smc_uart_t *)&commproc->cp_dparam[PROFF_SMC1];
-	smp->smc_rpbase = 0x1FC0;
-
-	printk("I2C/SPI/SMC1 microcode patch installed.\n");
-# endif /* CONFIG_I2C_SPI_SMC1_UCODE_PATCH) */
-
-#endif /* some variation of the I2C/SPI patch was selected */
-}
-
-/*
- *  Take this entire routine out, since no one calls it and its 
- * logic is suspect.
- */
-
-#if 0
-void
-verify_patch(volatile immap_t *immr)
-{
-	volatile uint		*dp;
-	volatile cpm8xx_t	*commproc;
-	int i;
-
-	commproc = (cpm8xx_t *)&immr->im_cpm;
-
-	printk("cp_rccr %x\n", commproc->cp_rccr);
-	commproc->cp_rccr = 0;
-
-	dp = (uint *)(commproc->cp_dpmem);
-	for (i=0; i<(sizeof(patch_2000)/4); i++)
-		if (*dp++ != patch_2000[i]) {
-			printk("patch_2000 bad at %d\n", i);
-			dp--;
-			printk("found 0x%X, wanted 0x%X\n", *dp, patch_2000[i]);
-			break;
-		}
-
-	dp = (uint *)&(commproc->cp_dpmem[0x0f00]);
-	for (i=0; i<(sizeof(patch_2f00)/4); i++)
-		if (*dp++ != patch_2f00[i]) {
-			printk("patch_2f00 bad at %d\n", i);
-			dp--;
-			printk("found 0x%X, wanted 0x%X\n", *dp, patch_2f00[i]);
-			break;
-		}
-
-	commproc->cp_rccr = 0x0009;
-}
-#endif
diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
deleted file mode 100644
index 0f1863ed9c1c..000000000000
--- a/arch/ppc/Kconfig
+++ /dev/null
@@ -1,1186 +0,0 @@
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-
-mainmenu "Linux/PowerPC Kernel Configuration"
-
-config WORD_SIZE
-	int
-	default 32
-
-config MMU
-	bool
-	default y
-
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config RWSEM_GENERIC_SPINLOCK
-	bool
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default y
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default y
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-config GENERIC_HWEIGHT
-	bool
-	default y
-
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config PPC
-	bool
-	default y
-	select HAVE_IDE
-	select HAVE_OPROFILE
-	select HAVE_KPROBES
-
-config PPC32
-	bool
-	default y
-
-# All PPCs use generic nvram driver through ppc_md
-config GENERIC_NVRAM
-	bool
-	default y
-
-config GENERIC_FIND_NEXT_BIT
-	bool
-	default y
-
-config SCHED_NO_NO_OMIT_FRAME_POINTER
-	bool
-	default y
-
-config ARCH_MAY_HAVE_PC_FDC
-	bool
-	default y
-
-config GENERIC_BUG
-	bool
-	default y
-	depends on BUG
-
-source "init/Kconfig"
-
-menu "Processor"
-
-choice
-	prompt "Processor Type"
-	default 6xx
-
-config 6xx
-	bool "6xx/7xx/74xx/52xx/82xx"
-	select PPC_FPU
-	help
-	  There are four types of PowerPC chips supported.  The more common
-	  types (601, 603, 604, 740, 750, 7400), the older Freescale
-	  (formerly Motorola) embedded versions (821, 823, 850, 855, 860,
-	  52xx, 82xx), the IBM embedded versions (403 and 405) and
-	  the Book E embedded processors from IBM (44x) and Freescale (85xx).
-	  For support for 64-bit processors, set ARCH=powerpc.
-	  Unless you are building a kernel for one of the embedded processor
-	  systems, choose 6xx.
-	  Also note that because the 52xx, 82xx family have a 603e
-	  core, specific support for that chipset is asked later on.
-
-config 40x
-	bool "40x"
-	select PPC_DCR_NATIVE
-
-config 44x
-	bool "44x"
-	select PPC_DCR_NATIVE
-
-config 8xx
-	bool "8xx"
-	select PPC_LIB_RHEAP
-
-endchoice
-
-config PPC_FPU
-	bool
-
-config PPC_DCR_NATIVE
-	bool
-	default n
-
-config PPC_DCR
-	bool
-	depends on PPC_DCR_NATIVE
-	default y
-
-config PTE_64BIT
-	bool
-	depends on 44x
-	default y if 44x
-
-config PHYS_64BIT
-	bool
-	depends on 44x
-	default y if 44x
-	---help---
-	  This option enables kernel support for larger than 32-bit physical
-	  addresses.  This features is not be available on all e500 cores.
-
-	  If in doubt, say N here.
-
-config ALTIVEC
-	bool "AltiVec Support"
-	depends on 6xx
-	depends on !8260
-	---help---
-	  This option enables kernel support for the Altivec extensions to the
-	  PowerPC processor. The kernel currently supports saving and restoring
-	  altivec registers, and turning on the 'altivec enable' bit so user
-	  processes can execute altivec instructions.
-
-	  This option is only usefully if you have a processor that supports
-	  altivec (G4, otherwise known as 74xx series), but does not have
-	  any affect on a non-altivec cpu (it does, however add code to the
-	  kernel).
-
-	  If in doubt, say Y here.
-
-config TAU
-	bool "Thermal Management Support"
-	depends on 6xx && !8260
-	help
-	  G3 and G4 processors have an on-chip temperature sensor called the
-	  'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
-	  temperature within 2-4 degrees Celsius. This option shows the current
-	  on-die temperature in /proc/cpuinfo if the cpu supports it.
-
-	  Unfortunately, on some chip revisions, this sensor is very inaccurate
-	  and in some cases, does not work at all, so don't assume the cpu
-	  temp is actually what /proc/cpuinfo says it is.
-
-config TAU_INT
-	bool "Interrupt driven TAU driver (DANGEROUS)"
-	depends on TAU
-	---help---
-	  The TAU supports an interrupt driven mode which causes an interrupt
-	  whenever the temperature goes out of range. This is the fastest way
-	  to get notified the temp has exceeded a range. With this option off,
-	  a timer is used to re-check the temperature periodically.
-
-	  However, on some cpus it appears that the TAU interrupt hardware
-	  is buggy and can cause a situation which would lead unexplained hard
-	  lockups.
-
-	  Unless you are extending the TAU driver, or enjoy kernel/hardware
-	  debugging, leave this option off.
-
-config TAU_AVERAGE
-	bool "Average high and low temp"
-	depends on TAU
-	---help---
-	  The TAU hardware can compare the temperature to an upper and lower
-	  bound.  The default behavior is to show both the upper and lower
-	  bound in /proc/cpuinfo. If the range is large, the temperature is
-	  either changing a lot, or the TAU hardware is broken (likely on some
-	  G4's). If the range is small (around 4 degrees), the temperature is
-	  relatively stable.  If you say Y here, a single temperature value,
-	  halfway between the upper and lower bounds, will be reported in
-	  /proc/cpuinfo.
-
-	  If in doubt, say N here.
-
-config MATH_EMULATION
-	bool "Math emulation"
-	depends on 4xx || 8xx
-	---help---
-	  Some PowerPC chips designed for embedded applications do not have
-	  a floating-point unit and therefore do not implement the
-	  floating-point instructions in the PowerPC instruction set.  If you
-	  say Y here, the kernel will include code to emulate a floating-point
-	  unit, which will allow programs that use floating-point
-	  instructions to run.
-
-	  If you have an Apple machine or an IBM RS/6000 or pSeries machine,
-	  or any machine with a 6xx, 7xx or 7xxx series processor, say N
-	  here.  Saying Y here will not hurt performance (on any machine) but
-	  will increase the size of the kernel.
-
-config KEXEC
-	bool "kexec system call (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	help
-	  kexec is a system call that implements the ability to shutdown your
-	  current kernel, and to start another kernel.  It is like a reboot
-	  but it is independent of the system firmware.   And like a reboot
-	  you can start any kernel with it, not just Linux.
-
-	  The name comes from the similarity to the exec system call.
-
-	  It is an ongoing process to be certain the hardware in a machine
-	  is properly shutdown, so do not be surprised if this code does not
-	  initially work for you.  It may help to enable device hotplugging
-	  support.  As of this writing the exact hardware interface is
-	  strongly in flux, so no good recommendation can be made.
-
-	  In the GameCube implementation, kexec allows you to load and
-	  run DOL files, including kernel and homebrew DOLs.
-
-source "drivers/cpufreq/Kconfig"
-
-config PPC601_SYNC_FIX
-	bool "Workarounds for PPC601 bugs"
-	depends on 6xx && PPC_PREP
-	help
-	  Some versions of the PPC601 (the first PowerPC chip) have bugs which
-	  mean that extra synchronization instructions are required near
-	  certain instructions, typically those that make major changes to the
-	  CPU state.  These extra instructions reduce performance slightly.
-	  If you say N here, these extra instructions will not be included,
-	  resulting in a kernel which will run faster but may not run at all
-	  on some systems with the PPC601 chip.
-
-	  If in doubt, say Y here.
-
-source arch/ppc/platforms/4xx/Kconfig
-
-config PPC_STD_MMU
-	bool
-	depends on 6xx
-	default y
-
-config NOT_COHERENT_CACHE
-	bool
-	depends on 4xx || 8xx
-	default y
-
-endmenu
-
-menu "Platform options"
-
-config FADS
-	bool
-
-choice
-	prompt "8xx Machine Type"
-	depends on 8xx
-	default RPXLITE
-
-config RPXLITE
-	bool "RPX-Lite"
-	---help---
-	  Single-board computers based around the PowerPC MPC8xx chips and
-	  intended for embedded applications.  The following types are
-	  supported:
-
-	  RPX-Lite:
-	  Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823.
-
-	  RPX-Classic:
-	  Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on
-	  the MPC 860
-
-	  BSE-IP:
-	  Bright Star Engineering ip-Engine.
-
-	  TQM823L:
-	  TQM850L:
-	  TQM855L:
-	  TQM860L:
-	  MPC8xx based family of mini modules, half credit card size,
-	  up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports,
-	  2 x CAN bus interface, ...
-	  Manufacturer: TQ Components, www.tq-group.de
-	  Date of Release: October (?) 1999
-	  End of Life: not yet :-)
-	  URL:
-	  - module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>
-	  - starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf>
-	  - images: <http://www.denx.de/embedded-ppc-en.html>
-
-	  FPS850L:
-	  FingerPrint Sensor System (based on TQM850L)
-	  Manufacturer: IKENDI AG, <http://www.ikendi.com/>
-	  Date of Release: November 1999
-	  End of life: end 2000 ?
-	  URL: see TQM850L
-
-	  IVMS8:
-	  MPC860 based board used in the "Integrated Voice Mail System",
-	  Small Version (8 voice channels)
-	  Manufacturer: Speech Design, <http://www.speech-design.de/>
-	  Date of Release: December 2000 (?)
-	  End of life: -
-	  URL: <http://www.speech-design.de/>
-
-	  IVML24:
-	  MPC860 based board used in the "Integrated Voice Mail System",
-	  Large Version (24 voice channels)
-	  Manufacturer: Speech Design, <http://www.speech-design.de/>
-	  Date of Release: March 2001  (?)
-	  End of life: -
-	  URL: <http://www.speech-design.de/>
-
-	  HERMES:
-	  Hermes-Pro ISDN/LAN router with integrated 8 x hub
-	  Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
-	  <http://www.multidata.de/>
-	  Date of Release: 2000 (?)
-	  End of life: -
-	  URL: <http://www.multidata.de/english/products/hpro.htm>
-
-	  IP860:
-	  VMEBus IP (Industry Pack) carrier board with MPC860
-	  Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
-	  Date of Release: ?
-	  End of life: -
-	  URL: <http://www.microsys.de/html/ip860.html>
-
-	  PCU_E:
-	  PCU = Peripheral Controller Unit, Extended
-	  Manufacturer: Siemens AG, ICN (Information and Communication Networks)
-	  	<http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html>
-	  Date of Release: April 2001
-	  End of life: August 2001
-	  URL: n. a.
-
-config RPXCLASSIC
-	bool "RPX-Classic"
-	help
-	  The RPX-Classic is a single-board computer based on the Motorola
-	  MPC860.  It features 16MB of DRAM and a variable amount of flash,
-	  I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two
-	  LEDs.  Variants with Ethernet ports exist.  Say Y here to support it
-	  directly.
-
-config BSEIP
-	bool "BSE-IP"
-	help
-	  Say Y here to support the Bright Star Engineering ipEngine SBC.
-	  This is a credit-card-sized device featuring a MPC823 processor,
-	  26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
-	  controller, and two RS232 ports.
-
-config MPC8XXFADS
-	bool "FADS"
-	select FADS
-
-config TQM823L
-	bool "TQM823L"
-	help
-	  Say Y here to support the TQM823L, one of an MPC8xx-based family of
-	  mini SBCs (half credit-card size) from TQ Components first released
-	  in late 1999.  Technical references are at
-	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-	  <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM850L
-	bool "TQM850L"
-	help
-	  Say Y here to support the TQM850L, one of an MPC8xx-based family of
-	  mini SBCs (half credit-card size) from TQ Components first released
-	  in late 1999.  Technical references are at
-	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-	  <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM855L
-	bool "TQM855L"
-	help
-	  Say Y here to support the TQM855L, one of an MPC8xx-based family of
-	  mini SBCs (half credit-card size) from TQ Components first released
-	  in late 1999.  Technical references are at
-	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-	  <http://www.denx.de/embedded-ppc-en.html>.
-
-config TQM860L
-	bool "TQM860L"
-	help
-	  Say Y here to support the TQM860L, one of an MPC8xx-based family of
-	  mini SBCs (half credit-card size) from TQ Components first released
-	  in late 1999.  Technical references are at
-	  <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
-	  <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
-	  <http://www.denx.de/embedded-ppc-en.html>.
-
-config FPS850L
-	bool "FPS850L"
-
-config IVMS8
-	bool "IVMS8"
-	help
-	  Say Y here to support the Integrated Voice-Mail Small 8-channel SBC
-	  from Speech Design, released March 2001.  The manufacturer's website
-	  is at <http://www.speech-design.de/>.
-
-config IVML24
-	bool "IVML24"
-	help
-	  Say Y here to support the Integrated Voice-Mail Large 24-channel SBC
-	  from Speech Design, released March 2001.  The manufacturer's website
-	  is at <http://www.speech-design.de/>.
-
-config HERMES_PRO
-	bool "HERMES"
-
-config IP860
-	bool "IP860"
-
-config LWMON
-	bool "LWMON"
-
-config PCU_E
-	bool "PCU_E"
-
-config CCM
-	bool "CCM"
-
-config LANTEC
-	bool "LANTEC"
-
-config MBX
-	bool "MBX"
-	help
-	  MBX is a line of Motorola single-board computer based around the
-	  MPC821 and MPC860 processors, and intended for embedded-controller
-	  applications.  Say Y here to support these boards directly.
-
-config WINCEPT
-	bool "WinCept"
-	help
-	  The Wincept 100/110 is a Motorola single-board computer based on the
-	  MPC821 PowerPC, introduced in 1998 and designed to be used in
-	  thin-client machines.  Say Y to support it directly.
-
-endchoice
-
-choice
-	prompt "Machine Type"
-	depends on 6xx
-	default PPC_PREP
-	---help---
-	  Linux currently supports several different kinds of PowerPC-based
-	  machines: Apple Power Macintoshes and clones (such as the Motorola
-	  Starmax series), PReP (PowerPC Reference Platform) machines (such
-	  as the Motorola PowerStacks, Motorola cPCI/VME embedded systems,
-	  and some IBM RS/6000 systems), CHRP (Common Hardware Reference
-	  Platform) machines (including all of the recent IBM RS/6000 and
-	  pSeries machines), and several embedded PowerPC systems containing
-	  4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors.  Currently, the
-	  default option is to build a kernel which works on PReP.
-
-	  Note that support for Apple and CHRP machines is now only available
-	  with ARCH=powerpc, and has been removed from this menu.  If you
-	  wish to build a kernel for an Apple or CHRP machine, exit this
-	  configuration process and re-run it with ARCH=powerpc.
-
-	  Select PReP if configuring for a PReP machine.
-
-config PPC_PREP
-	bool "PReP"
-
-config KATANA
-	bool "Artesyn-Katana"
-	help
-	  Select KATANA if configuring an Artesyn KATANA 750i or 3750
-	  cPCI board.
-
-config WILLOW
-	bool "Cogent-Willow"
-
-config CPCI690
-	bool "Force-CPCI690"
-	help
-	  Select CPCI690 if configuring a Force CPCI690 cPCI board.
-
-config POWERPMC250
-	bool "Force-PowerPMC250"
-
-config CHESTNUT
-	bool "IBM 750FX Eval board or 750GX Eval board"
-	help
-	  Select CHESTNUT if configuring an IBM 750FX Eval Board or a
-	  IBM 750GX Eval board.
-
-config SPRUCE
-	bool "IBM-Spruce"
-	select PPC_INDIRECT_PCI
-
-config HDPU
-	bool "Sky-HDPU"
-	help
-	  Select HDPU if configuring a Sky Computers Compute Blade.
-
-config HDPU_FEATURES
-	depends on HDPU
-	tristate "HDPU-Features"
-	help
-	  Select to enable HDPU enhanced features.
-
-config EV64260
-	bool "Marvell-EV64260BP"
-	help
-	  Select EV64260 if configuring a Marvell (formerly Galileo)
-	  EV64260BP Evaluation platform.
-
-config LOPEC
-	bool "Motorola-LoPEC"
-	select PPC_I8259
-
-config MVME5100
-	bool "Motorola-MVME5100"
-	select PPC_INDIRECT_PCI
-
-config PPLUS
-	bool "Motorola-PowerPlus"
-	select PPC_I8259
-	select PPC_INDIRECT_PCI
-
-config PRPMC750
-	bool "Motorola-PrPMC750"
-	select PPC_INDIRECT_PCI
-
-config PRPMC800
-	bool "Motorola-PrPMC800"
-	select PPC_INDIRECT_PCI
-
-config SANDPOINT
-	bool "Motorola-Sandpoint"
-	select PPC_I8259
-	help
-	  Select SANDPOINT if configuring for a Motorola Sandpoint X3
-	  (any flavor).
-
-config RADSTONE_PPC7D
-	bool "Radstone Technology PPC7D board"
-	select PPC_I8259
-
-config PAL4
-	bool "SBS-Palomar4"
-
-config EST8260
-	bool "EST8260"
-	---help---
-	  The EST8260 is a single-board computer manufactured by Wind River
-	  Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
-	  the MPC8260.  Wind River Systems has a website at
-	  <http://www.windriver.com/>, but the EST8260 cannot be found on it
-	  and has probably been discontinued or rebadged.
-
-config SBC82xx
-	bool "SBC82xx"
-	---help---
-	  SBC PowerQUICC II, single-board computer with MPC82xx CPU
-	  Manufacturer: Wind River Systems, Inc.
-	  Date of Release: May 2003
-	  End of Life: -
-	  URL: <http://www.windriver.com/>
-
-config SBS8260
-	bool "SBS8260"
-
-config RPX8260
-	bool "RPXSUPER"
-
-config TQM8260
-	bool "TQM8260"
-	---help---
-	  MPC8260 based module, little larger than credit card,
-	  up to 128 MB global + 64 MB local RAM, 32 MB Flash,
-	  32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
-	  2 x serial ports, ...
-	  Manufacturer: TQ Components, www.tq-group.de
-	  Date of Release: June 2001
-	  End of Life: not yet :-)
-	  URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
-
-config PQ2FADS
-	bool "Freescale-PQ2FADS"
-	help
-	  Select PQ2FADS if you wish to configure for a Freescale
-	  PQ2FADS board (-VR or -ZU).
-
-config LITE5200
-	bool "Freescale LITE5200 / (IceCube)"
-	select PPC_MPC52xx
-	help
-	  Support for the LITE5200 dev board for the MPC5200 from Freescale.
-	  This is for the LITE5200 version 2.0 board. Don't know if it changes
-	  much but it's only been tested on this board version. I think this
-	  board is also known as IceCube.
-
-config LITE5200B
-	bool "Freescale LITE5200B"
-	depends on LITE5200
-	help
-	  Support for the LITE5200B dev board for the MPC5200 from Freescale.
-	  This is the new board with 2 PCI slots.
-
-config EV64360
-	bool "Marvell-EV64360BP"
-	help
-	  Select EV64360 if configuring a Marvell EV64360BP Evaluation
-	  platform.
-endchoice
-
-config TQM8xxL
-	bool
-	depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
-	default y
-
-config EMBEDDEDBOOT
-	bool
-	depends on 8xx || 8260
-	default y
-
-config PPC_MPC52xx
-	bool
-
-config 8260
-	bool "CPM2 Support" if WILLOW
-	depends on 6xx
-	default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
-	help
-	  The MPC8260 is a typical embedded CPU made by Motorola.  Selecting
-	  this option means that you wish to build a kernel for a machine with
-	  an 8260 class CPU.
-
-config CPM1
-	bool
-	depends on 8xx
-	default y
-	help
-	  The CPM1 (Communications Processor Module) is a coprocessor on
-	  embedded CPUs made by Motorola.  Selecting this option means that
-	  you wish to build a kernel for a machine with a CPM1 coprocessor
-	  on it (8xx, 827x, 8560).
-
-config CPM2
-	bool
-	depends on 8260 || MPC8560 || MPC8555
-	select PPC_LIB_RHEAP
-	default y
-	help
-	  The CPM2 (Communications Processor Module) is a coprocessor on
-	  embedded CPUs made by Motorola.  Selecting this option means that
-	  you wish to build a kernel for a machine with a CPM2 coprocessor
-	  on it (826x, 827x, 8560).
-
-config PPC_GEN550
-	bool
-	depends on SANDPOINT || SPRUCE || PPLUS || \
-		PRPMC750 || PRPMC800 || LOPEC || \
-		(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D
-	default y
-
-config FORCE
-	bool
-	depends on 6xx && POWERPMC250
-	default y
-
-config GT64260
-	bool
-	depends on EV64260 || CPCI690
-	default y
-
-config MV64360		# Really MV64360 & MV64460
-	bool
-	depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
-	default y
-
-config MV64X60
-	bool
-	depends on (GT64260 || MV64360)
-	select PPC_INDIRECT_PCI
-	default y
-
-config MV643XX_ETH_0
-	bool
-	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360 || HDPU)
-	default y
-
-config MV643XX_ETH_1
-	bool
-	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
-	default y
-
-config MV643XX_ETH_2
-	bool
-	depends on MV643XX_ETH && (KATANA || RADSTONE_PPC7D || EV64360)
-	default y
-
-menu "Set bridge options"
-	depends on MV64X60
-
-config NOT_COHERENT_CACHE
-	bool "Turn off Cache Coherency"
-	default n
-	help
-	  Some 64x60 bridges lock up when trying to enforce cache coherency.
-	  When this option is selected, cache coherency will be turned off.
-	  Note that this can cause other problems (e.g., stale data being
-	  speculatively loaded via a cached mapping).  Use at your own risk.
-
-config MV64X60_BASE
-	hex "Set bridge base used by firmware"
-	default "0xf1000000"
-	help
-	  A firmware can leave the base address of the bridge's registers at
-	  a non-standard location.  If so, set this value to reflect the
-	  address of that non-standard location.
-
-config MV64X60_NEW_BASE
-	hex "Set bridge base used by kernel"
-	default "0xf1000000"
-	help
-	  If the current base address of the bridge's registers is not where
-	  you want it, set this value to the address that you want it moved to.
-
-endmenu
-
-config NONMONARCH_SUPPORT
-	bool "Enable Non-Monarch Support"
-	depends on PRPMC800
-
-config HARRIER
-	bool
-	depends on PRPMC800
-	default y
-
-config EPIC_SERIAL_MODE
-	bool
-	depends on 6xx && (LOPEC || SANDPOINT)
-	default y
-
-config MPC10X_BRIDGE
-	bool
-	depends on POWERPMC250 || LOPEC || SANDPOINT
-	select PPC_INDIRECT_PCI
-	default y
-
-config MPC10X_OPENPIC
-	bool
-	depends on POWERPMC250 || LOPEC || SANDPOINT
-	default y
-
-config MPC10X_STORE_GATHERING
-	bool "Enable MPC10x store gathering"
-	depends on MPC10X_BRIDGE
-
-config SANDPOINT_ENABLE_UART1
-	bool "Enable DUART mode on Sandpoint"
-	depends on SANDPOINT
-	help
-	  If this option is enabled then the MPC824x processor will run
-	  in DUART mode instead of UART mode.
-
-config HARRIER_STORE_GATHERING
-	bool "Enable Harrier store gathering"
-	depends on HARRIER
-
-config MVME5100_IPMC761_PRESENT
-	bool "MVME5100 configured with an IPMC761"
-	depends on MVME5100
-	select PPC_I8259
-
-config SPRUCE_BAUD_33M
-	bool "Spruce baud clock support"
-	depends on SPRUCE
-
-config PC_KEYBOARD
-	bool "PC PS/2 style Keyboard"
-	depends on 4xx || CPM2
-
-config PPCBUG_NVRAM
-	bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
-	default y if PPC_PREP
-
-config SMP
-	depends on PPC_STD_MMU
-	bool "Symmetric multi-processing support"
-	---help---
-	  This enables support for systems with more than one CPU. If you have
-	  a system with only one CPU, say N. If you have a system with more
-	  than one CPU, say Y.  Note that the kernel does not currently
-	  support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
-	  since they have inadequate hardware support for multiprocessor
-	  operation.
-
-	  If you say N here, the kernel will run on single and multiprocessor
-	  machines, but will use only one CPU of a multiprocessor machine. If
-	  you say Y here, the kernel will run on single-processor machines.
-	  On a single-processor machine, the kernel will run faster if you say
-	  N here.
-
-	  If you don't know what to do here, say N.
-
-config IRQ_ALL_CPUS
-	bool "Distribute interrupts on all CPUs by default"
-	depends on SMP && !MV64360
-	help
-	  This option gives the kernel permission to distribute IRQs across
-	  multiple CPUs.  Saying N here will route all IRQs to the first
-	  CPU.  Generally saying Y is safe, although some problems have been
-	  reported with SMP Power Macintoshes with this option enabled.
-
-config NR_CPUS
-	int "Maximum number of CPUs (2-32)"
-	range 2 32
-	depends on SMP
-	default "4"
-
-config HIGHMEM
-	bool "High memory support"
-
-config ARCH_POPULATES_NODE_MAP
-	def_bool y
-
-source kernel/Kconfig.hz
-source kernel/Kconfig.preempt
-source "mm/Kconfig"
-
-source "fs/Kconfig.binfmt"
-
-config PREP_RESIDUAL
-	bool "Support for PReP Residual Data"
-	depends on PPC_PREP
-	help
-	  Some PReP systems have residual data passed to the kernel by the
-	  firmware.  This allows detection of memory size, devices present and
-	  other useful pieces of information.  Sometimes this information is
-	  not present or incorrect, in which case it could lead to the machine 
-	  behaving incorrectly.  If this happens, either disable PREP_RESIDUAL
-	  or pass the 'noresidual' option to the kernel.
-
-	  If you are running a PReP system, say Y here, otherwise say N.
-
-config PROC_PREPRESIDUAL
-	bool "Support for reading of PReP Residual Data in /proc"
-	depends on PREP_RESIDUAL && PROC_FS
-	help
-	  Enabling this option will create a /proc/residual file which allows
-	  you to get at the residual data on PReP systems.  You will need a tool
-	  (lsresidual) to parse it.  If you aren't on a PReP system, you don't
-	  want this.
-
-config CMDLINE_BOOL
-	bool "Default bootloader kernel arguments"
-
-config CMDLINE
-	string "Initial kernel command string"
-	depends on CMDLINE_BOOL
-	default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
-	help
-	  On some platforms, there is currently no way for the boot loader to
-	  pass arguments to the kernel. For these platforms, you can supply
-	  some command-line options at build time by entering them here.  In
-	  most cases you will need to specify the root device here.
-
-if BROKEN
-source kernel/power/Kconfig
-endif
-
-config SECCOMP
-	bool "Enable seccomp to safely compute untrusted bytecode"
-	depends on PROC_FS
-	default y
-	help
-	  This kernel feature is useful for number crunching applications
-	  that may need to compute untrusted bytecode during their
-	  execution. By using pipes or other transports made available to
-	  the process as file descriptors supporting the read/write
-	  syscalls, it's possible to isolate those applications in
-	  their own address space using seccomp. Once seccomp is
-	  enabled via /proc/<pid>/seccomp, it cannot be disabled
-	  and the task is only allowed to execute a few safe syscalls
-	  defined by each seccomp mode.
-
-	  If unsure, say Y. Only embedded should say N here.
-
-endmenu
-
-config ISA_DMA_API
-	bool
-	default y
-
-menu "Bus options"
-
-config ISA
-	bool "Support for ISA-bus hardware"
-	depends on PPC_PREP
-	help
-	  Find out whether you have ISA slots on your motherboard.  ISA is the
-	  name of a bus system, i.e. the way the CPU talks to the other stuff
-	  inside your box.  If you have an Apple machine, say N here; if you
-	  have an IBM RS/6000 or pSeries machine or a PReP machine, say Y.  If
-	  you have an embedded board, consult your board documentation.
-
-config ZONE_DMA
-	bool
-	default y
-
-config GENERIC_ISA_DMA
-	bool
-	depends on 6xx && !CPM2
-	default y
-
-config PPC_I8259
-	bool
-	default y if PPC_PREP
-	default n
-
-config PPC_INDIRECT_PCI
-	bool
-	depends on PCI
-	default y if 40x || 44x || PPC_PREP
-	default n
-
-config EISA
-	bool
-	help
-	  The Extended Industry Standard Architecture (EISA) bus is a bus
-	  architecture used on some older intel-based PCs.
-
-config SBUS
-	bool
-
-# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
-config MCA
-	bool
-
-config PCI
-	bool "PCI support" if 40x || CPM2 || PPC_MPC52xx
-	default y if !40x && !CPM2 && !8xx
-	default PCI_QSPAN if !4xx && !CPM2 && 8xx
-	help
-	  Find out whether your system includes a PCI bus. PCI is the name of
-	  a bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box.  If you say Y here, the kernel will include drivers and
-	  infrastructure code to support PCI bus devices.
-
-config PCI_DOMAINS
-	def_bool PCI
-
-config PCI_SYSCALL
-	def_bool PCI
-
-config PCI_QSPAN
-	bool "QSpan PCI"
-	depends on !4xx && !CPM2 && 8xx
-	select PPC_I8259
-	help
-	  Say Y here if you have a system based on a Motorola 8xx-series
-	  embedded processor with a QSPAN PCI interface, otherwise say N.
-
-config PCI_8260
-	bool
-	depends on PCI && 8260
-	select PPC_INDIRECT_PCI
-	default y
-
-config 8260_PCI9
-	bool "Enable workaround for MPC826x erratum PCI 9"
-	depends on PCI_8260
-	default y
-
-choice
-	prompt "IDMA channel for PCI 9 workaround"
-	depends on 8260_PCI9
-
-config 8260_PCI9_IDMA1
-	bool "IDMA1"
-
-config 8260_PCI9_IDMA2
-	bool "IDMA2"
-
-config 8260_PCI9_IDMA3
-	bool "IDMA3"
-
-config 8260_PCI9_IDMA4
-	bool "IDMA4"
-
-endchoice
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-config RAPIDIO
-	bool "RapidIO support" if MPC8540 || MPC8560
-	help
-	  If you say Y here, the kernel will include drivers and
-	  infrastructure code to support RapidIO interconnect devices.
-
-source "drivers/rapidio/Kconfig"
-
-endmenu
-
-menu "Advanced setup"
-
-config ADVANCED_OPTIONS
-	bool "Prompt for advanced kernel configuration options"
-	help
-	  This option will enable prompting for a variety of advanced kernel
-	  configuration options.  These options can cause the kernel to not
-	  work if they are set incorrectly, but can be used to optimize certain
-	  aspects of kernel memory management.
-
-	  Unless you know what you are doing, say N here.
-
-comment "Default settings for advanced configuration options are used"
-	depends on !ADVANCED_OPTIONS
-
-config HIGHMEM_START_BOOL
-	bool "Set high memory pool address"
-	depends on ADVANCED_OPTIONS && HIGHMEM
-	help
-	  This option allows you to set the base address of the kernel virtual
-	  area used to map high memory pages.  This can be useful in
-	  optimizing the layout of kernel virtual memory.
-
-	  Say N here unless you know what you are doing.
-
-config HIGHMEM_START
-	hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
-	default "0xfe000000"
-
-config LOWMEM_SIZE_BOOL
-	bool "Set maximum low memory"
-	depends on ADVANCED_OPTIONS
-	help
-	  This option allows you to set the maximum amount of memory which
-	  will be used as "low memory", that is, memory which the kernel can
-	  access directly, without having to set up a kernel virtual mapping.
-	  This can be useful in optimizing the layout of kernel virtual
-	  memory.
-
-	  Say N here unless you know what you are doing.
-
-config LOWMEM_SIZE
-	hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
-	default "0x30000000"
-
-config KERNEL_START_BOOL
-	bool "Set custom kernel base address"
-	depends on ADVANCED_OPTIONS
-	help
-	  This option allows you to set the kernel virtual address at which
-	  the kernel will map low memory (the kernel image will be linked at
-	  this address).  This can be useful in optimizing the virtual memory
-	  layout of the system.
-
-	  Say N here unless you know what you are doing.
-
-config KERNEL_START
-	hex "Virtual address of kernel base" if KERNEL_START_BOOL
-	default "0xc0000000"
-
-config TASK_SIZE_BOOL
-	bool "Set custom user task size"
-	depends on ADVANCED_OPTIONS
-	help
-	  This option allows you to set the amount of virtual address space
-	  allocated to user tasks.  This can be useful in optimizing the
-	  virtual memory layout of the system.
-
-	  Say N here unless you know what you are doing.
-
-config TASK_SIZE
-	hex "Size of user task space" if TASK_SIZE_BOOL
-	default "0x80000000"
-
-config CONSISTENT_START_BOOL
-	bool "Set custom consistent memory pool address"
-	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
-	help
-	  This option allows you to set the base virtual address
-	  of the consistent memory pool.  This pool of virtual
-	  memory is used to make consistent memory allocations.
-
-config CONSISTENT_START
-	hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
-	default "0xff100000" if NOT_COHERENT_CACHE
-
-config CONSISTENT_SIZE_BOOL
-	bool "Set custom consistent memory pool size"
-	depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
-	help
-	  This option allows you to set the size of the
-	  consistent memory pool.  This pool of virtual memory
-	  is used to make consistent memory allocations.
-
-config CONSISTENT_SIZE
-	hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
-	default "0x00200000" if NOT_COHERENT_CACHE
-
-config BOOT_LOAD_BOOL
-	bool "Set the boot link/load address"
-	depends on ADVANCED_OPTIONS && !PPC_PREP
-	help
-	  This option allows you to set the initial load address of the zImage
-	  or zImage.initrd file.  This can be useful if you are on a board
-	  which has a small amount of memory.
-
-	  Say N here unless you know what you are doing.
-
-config BOOT_LOAD
-	hex "Link/load address for booting" if BOOT_LOAD_BOOL
-	default "0x00400000" if 40x || 8xx || 8260
-	default "0x01000000" if 44x
-	default "0x00800000"
-
-config PIN_TLB
-	bool "Pinned Kernel TLBs (860 ONLY)"
-	depends on ADVANCED_OPTIONS && 8xx
-
-config PPC_LIB_RHEAP
-	bool
-
-endmenu
-
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/ppc/8xx_io/Kconfig"
-
-source "arch/ppc/8260_io/Kconfig"
-
-
-menu "IBM 40x options"
-	depends on 40x
-
-config SERIAL_SICC
-	bool "SICC Serial port"
-	depends on STB03xxx
-
-config UART1_DFLT_CONSOLE
-	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
-
-config SERIAL_SICC_CONSOLE
-	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
-
-endmenu
-
-source "lib/Kconfig"
-
-source "arch/ppc/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
diff --git a/arch/ppc/Kconfig.debug b/arch/ppc/Kconfig.debug
deleted file mode 100644
index f94b87740973..000000000000
--- a/arch/ppc/Kconfig.debug
+++ /dev/null
@@ -1,66 +0,0 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config KGDB
-	bool "Include kgdb kernel debugger"
-	depends on DEBUG_KERNEL && (BROKEN || PPC_GEN550 || 4xx)
-	select DEBUG_INFO
-	help
-	  Include in-kernel hooks for kgdb, the Linux kernel source level
-	  debugger.  See <http://kgdb.sourceforge.net/> for more information.
-	  Unless you are intending to debug the kernel, say N here.
-
-choice
-	prompt "Serial Port"
-	depends on KGDB
-	default KGDB_TTYS1
-
-config KGDB_TTYS0
-	bool "ttyS0"
-
-config KGDB_TTYS1
-	bool "ttyS1"
-
-config KGDB_TTYS2
-	bool "ttyS2"
-
-config KGDB_TTYS3
-	bool "ttyS3"
-
-endchoice
-
-config KGDB_CONSOLE
-	bool "Enable serial console thru kgdb port"
-	depends on KGDB && 8xx || CPM2
-	help
-	  If you enable this, all serial console messages will be sent
-	  over the gdb stub.
-	  If unsure, say N.
-
-config XMON
-	bool "Include xmon kernel debugger"
-	depends on DEBUG_KERNEL
-	help
-	  Include in-kernel hooks for the xmon kernel monitor/debugger.
-	  Unless you are intending to debug the kernel, say N here.
-
-config BDI_SWITCH
-	bool "Include BDI-2000 user context switcher"
-	depends on DEBUG_KERNEL
-	help
-	  Include in-kernel support for the Abatron BDI2000 debugger.
-	  Unless you are intending to debug the kernel with one of these
-	  machines, say N here.
-
-config SERIAL_TEXT_DEBUG
-	bool "Support for early boot texts over serial port"
-	depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \
-		PPC_GEN550 || PPC_MPC52xx
-
-config PPC_OCP
-	bool
-	depends on IBM_OCP
-	default y
-
-endmenu
diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
deleted file mode 100644
index 2352d139b262..000000000000
--- a/arch/ppc/Makefile
+++ /dev/null
@@ -1,135 +0,0 @@
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies.
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-# Changes for PPC by Gary Thomas
-# Rewritten by Cort Dougan and Paul Mackerras
-#
-
-# This must match PAGE_OFFSET in include/asm-ppc/page.h.
-KERNELLOAD	:= $(CONFIG_KERNEL_START)
-
-HAS_BIARCH	:= $(call cc-option-yn, -m32)
-ifeq ($(HAS_BIARCH),y)
-AS		:= $(AS) -a32
-LD		:= $(LD) -m elf32ppc
-CC		:= $(CC) -m32
-endif
-
-LDFLAGS_vmlinux	:= -Ttext $(KERNELLOAD) -Bstatic
-# The -Iarch/$(ARCH)/include is temporary while we are merging
-KBUILD_CPPFLAGS	+= -Iarch/$(ARCH) -Iarch/$(ARCH)/include
-KBUILD_AFLAGS	+= -Iarch/$(ARCH)
-KBUILD_CFLAGS	+= -Iarch/$(ARCH) -msoft-float -pipe \
-		-ffixed-r2 -mmultiple
-
-# No AltiVec instruction when building kernel
-KBUILD_CFLAGS	+= $(call cc-option, -mno-altivec)
-
-CPP		= $(CC) -E $(KBUILD_CFLAGS)
-# Temporary hack until we have migrated to asm-powerpc
-LINUXINCLUDE    += -Iarch/$(ARCH)/include
-
-CHECKFLAGS	+= -D__powerpc__
-
-cpu-as-$(CONFIG_4xx)		+= -Wa,-m405
-cpu-as-$(CONFIG_6xx)		+= -Wa,-maltivec
-
-KBUILD_AFLAGS += $(cpu-as-y)
-KBUILD_CFLAGS += $(cpu-as-y)
-
-# Default to the common case.
-KBUILD_DEFCONFIG := ebony_defconfig
-
-head-y				:= arch/ppc/kernel/head.o
-head-$(CONFIG_8xx)		:= arch/ppc/kernel/head_8xx.o
-head-$(CONFIG_4xx)		:= arch/ppc/kernel/head_4xx.o
-head-$(CONFIG_44x)		:= arch/ppc/kernel/head_44x.o
-
-head-$(CONFIG_PPC_FPU)		+= arch/powerpc/kernel/fpu.o
-
-core-y				+= arch/ppc/kernel/ arch/powerpc/kernel/ \
-				   arch/ppc/platforms/ \
-				   arch/ppc/mm/ arch/ppc/lib/ \
-				   arch/ppc/syslib/ arch/powerpc/sysdev/ \
-				   arch/powerpc/lib/
-core-$(CONFIG_4xx)		+= arch/ppc/platforms/4xx/
-core-$(CONFIG_MATH_EMULATION)	+= arch/powerpc/math-emu/
-core-$(CONFIG_XMON)		+= arch/ppc/xmon/
-drivers-$(CONFIG_8xx)		+= arch/ppc/8xx_io/
-drivers-$(CONFIG_4xx)		+= arch/ppc/4xx_io/
-drivers-$(CONFIG_CPM2)		+= arch/ppc/8260_io/
-
-drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
-
-BOOT_TARGETS = zImage zImage.initrd znetboot znetboot.initrd vmlinux.sm
-
-PHONY += $(BOOT_TARGETS)
-
-all: uImage zImage
-
-CPPFLAGS_vmlinux.lds	:= -Upowerpc
-
-# All the instructions talk about "make bzImage".
-bzImage: zImage
-
-boot := arch/$(ARCH)/boot
-
-$(BOOT_TARGETS): vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) $@
-
-uImage: vmlinux
-	$(Q)$(MAKE) $(build)=$(boot)/images $(boot)/images/$@
-
-define archhelp
-  @echo '* zImage          - Compressed kernel image (arch/$(ARCH)/boot/images/zImage.*)'
-  @echo '  uImage          - Create a bootable image for U-Boot / PPCBoot'
-  @echo '  install         - Install kernel using'
-  @echo '                    (your) ~/bin/installkernel or'
-  @echo '                    (distribution) /sbin/installkernel or'
-  @echo '                    install to $$(INSTALL_PATH) and run lilo'
-  @echo '  *_defconfig     - Select default config from arch/$(ARCH)/ppc/configs'
-endef
-
-archclean:
-	$(Q)$(MAKE) $(clean)=arch/ppc/boot
-	# Temporary hack until we have migrated to asm-powerpc
-	$(Q)rm -rf arch/$(ARCH)/include
-
-archprepare: checkbin
-
-# Temporary hack until we have migrated to asm-powerpc
-include/asm: arch/$(ARCH)/include/asm
-arch/$(ARCH)/include/asm:
-	$(Q)if [ ! -d arch/$(ARCH)/include ]; then mkdir -p arch/$(ARCH)/include; fi
-	$(Q)ln -fsn $(srctree)/include/asm-powerpc arch/$(ARCH)/include/asm
-
-# Use the file '.tmp_gas_check' for binutils tests, as gas won't output
-# to stdout and these checks are run even on install targets.
-TOUT	:= .tmp_gas_check
-# Ensure this is binutils 2.12.1 (or 2.12.90.0.7) or later for altivec
-# instructions.
-# gcc-3.4 and binutils-2.14 are a fatal combination.
-
-checkbin:
-	@if test "$(call cc-version)" = "0304" ; then \
-		if ! /bin/echo mftb 5 | $(AS) -v -mppc -many -o $(TOUT) >/dev/null 2>&1 ; then \
-			echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build '; \
-			echo 'correctly with gcc-3.4 and your version of binutils.'; \
-			echo '*** Please upgrade your binutils or downgrade your gcc'; \
-			false; \
-		fi ; \
-	fi
-	@if ! /bin/echo dssall | $(AS) -many -o $(TOUT) >/dev/null 2>&1 ; then \
-		echo -n '*** ${VERSION}.${PATCHLEVEL} kernels no longer build ' ; \
-		echo 'correctly with old versions of binutils.' ; \
-		echo '*** Please upgrade your binutils to 2.12.1 or newer' ; \
-		false ; \
-	fi
-
-CLEAN_FILES += $(TOUT)
-
diff --git a/arch/ppc/boot/Makefile b/arch/ppc/boot/Makefile
deleted file mode 100644
index 500497e3c72d..000000000000
--- a/arch/ppc/boot/Makefile
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# arch/ppc/boot/Makefile
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies.
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-# Adapted for PowerPC by Gary Thomas
-# modified by Cort (cort@cs.nmt.edu)
-#
-
-# KBUILD_CFLAGS used when building rest of boot (takes effect recursively)
-KBUILD_CFLAGS 	+= -fno-builtin -D__BOOTER__ -Iarch/$(ARCH)/boot/include
-HOSTCFLAGS	+= -Iarch/$(ARCH)/boot/include
-
-BOOT_TARGETS	= zImage zImage.initrd znetboot znetboot.initrd
-
-bootdir-y			:= simple
-subdir-y			:= lib common images
-subdir-$(CONFIG_PPC_PREP)	+= of1275
-
-# for cleaning
-subdir-				+= simple
-
-hostprogs-y := $(addprefix utils/, mkprep mkbugboot mktree)
-
-PHONY += $(BOOT_TARGETS) $(bootdir-y)
-
-$(BOOT_TARGETS): $(bootdir-y)
-
-$(bootdir-y): $(addprefix $(obj)/,$(subdir-y)) \
-		$(addprefix $(obj)/,$(hostprogs-y))
-	$(Q)$(MAKE) $(build)=$(obj)/$@ $(MAKECMDGOALS)
diff --git a/arch/ppc/boot/common/Makefile b/arch/ppc/boot/common/Makefile
deleted file mode 100644
index a2e85e3beb88..000000000000
--- a/arch/ppc/boot/common/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Tom Rini	January 2001
-#
-
-lib-y					:= string.o util.o misc-common.o \
-						serial_stub.o bootinfo.o
-lib-$(CONFIG_SERIAL_8250_CONSOLE)	+= ns16550.o
diff --git a/arch/ppc/boot/common/bootinfo.c b/arch/ppc/boot/common/bootinfo.c
deleted file mode 100644
index f4dc9b9fab9c..000000000000
--- a/arch/ppc/boot/common/bootinfo.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * General bootinfo record utilities
- * Author: Randy Vinson <rvinson@mvista.com>
- *
- * 2002 (c) MontaVista Software, Inc. This file is licensed under the terms
- * of the GNU General Public License version 2. This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/bootinfo.h>
-
-#include "nonstdio.h"
-
-static struct bi_record * birec = NULL;
-
-static struct bi_record *
-__bootinfo_build(struct bi_record *rec, unsigned long tag, unsigned long size,
-		 void *data)
-{
-	/* set the tag */
-	rec->tag = tag;
-
-	/* if the caller has any data, copy it */
-	if (size)
-		memcpy(rec->data, (char *)data, size);
-
-	/* set the record size */
-	rec->size = sizeof(struct bi_record) + size;
-
-	/* advance to the next available space */
-	rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
-	return rec;
-}
-
-void
-bootinfo_init(struct bi_record *rec)
-{
-
-	/* save start of birec area */
-	birec = rec;
-
-	/* create an empty list */
-	rec = __bootinfo_build(rec, BI_FIRST, 0, NULL);
-	(void) __bootinfo_build(rec, BI_LAST, 0, NULL);
-
-}
-
-void
-bootinfo_append(unsigned long tag, unsigned long size, void * data)
-{
-
-	struct bi_record *rec = birec;
-
-	/* paranoia */
-	if ((rec == NULL) || (rec->tag != BI_FIRST))
-		return;
-
-	/* find the last entry in the list */
-	while (rec->tag != BI_LAST)
-		rec = (struct bi_record *)((ulong)rec + rec->size);
-
-	/* overlay BI_LAST record with new one and tag on a new BI_LAST */
-	rec = __bootinfo_build(rec, tag, size, data);
-	(void) __bootinfo_build(rec, BI_LAST, 0, NULL);
-}
diff --git a/arch/ppc/boot/common/crt0.S b/arch/ppc/boot/common/crt0.S
deleted file mode 100644
index 8f0ef04b8de5..000000000000
--- a/arch/ppc/boot/common/crt0.S
+++ /dev/null
@@ -1,80 +0,0 @@
-/*    Copyright (c) 1997 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Initial Power Macintosh COFF version.
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *      Modifications for IBM PowerPC 400-class processor evaluation
- *      boards.
- *
- *    Module name: crt0.S
- *
- *    Description:
- *      Boot loader execution entry point. Clears out .bss section as per
- *      ANSI C requirements. Invalidates and flushes the caches over the
- *      range covered by the boot loader's .text section. Sets up a stack
- *      below the .text section entry point.
- *
- *    This program is free software; you can redistribute it and/or
- *    modify it under the terms of the GNU General Public License
- *    as published by the Free Software Foundation; either version
- *    2 of the License, or (at your option) any later version.
- */
-
-#include <asm/ppc_asm.h>
-
-	.text
-
-	.globl	_start
-_start:
-#ifdef XCOFF
-	.long	__start,0,0
-
-	.globl	__start
-__start:
-#endif
-
-	## Flush and invalidate the caches for the range in memory covering
-	## the .text section of the boot loader
-
-	lis	r9,_start@h		# r9 = &_start
-	lis	r8,_etext@ha		#
-	addi	r8,r8,_etext@l		# r8 = &_etext
-3:	dcbf	r0,r9			# Flush the data cache
-	icbi	r0,r9			# Invalidate the instruction cache
-	addi	r9,r9,0x10		# Increment by one cache line
-	cmplw	cr0,r9,r8		# Are we at the end yet?
-	blt	3b			# No, keep flushing and invalidating
-	sync				# sync ; isync after flushing the icache
-	isync
-
-	## Clear out the BSS as per ANSI C requirements
-
-	lis	r7,_end@ha
-	addi	r7,r7,_end@l		# r7 = &_end
-	lis	r8,__bss_start@ha	#
-	addi	r8,r8,__bss_start@l	# r8 = &_bss_start
-
-	## Determine how large an area, in number of words, to clear
-
-	subf	r7,r8,r7		# r7 = &_end - &_bss_start + 1
-	addi	r7,r7,3			# r7 += 3
-	srwi.	r7,r7,2			# r7 = size in words.
-	beq	2f			# If the size is zero, do not bother
-	addi	r8,r8,-4		# r8 -= 4
-	mtctr	r7			# SPRN_CTR = number of words to clear
-	li	r0,0			# r0 = 0
-1:	stwu	r0,4(r8)		# Clear out a word
-	bdnz	1b			# If we are not done yet, keep clearing
-2:
-
-#ifdef CONFIG_40x
-	## Set up the stack
-
-	lis	r9,_start@h		# r9 = &_start (text section entry)
-	ori	r9,r9,_start@l
-	subi	r1,r9,64		# Start the stack 64 bytes below _start
-	clrrwi	r1,r1,4			# Make sure it is aligned on 16 bytes.
-	li	r0,0
-	stwu	r0,-16(r1)
-	mtlr	r9
-#endif
-
-	b	start			# All done, start the real work.
diff --git a/arch/ppc/boot/common/misc-common.c b/arch/ppc/boot/common/misc-common.c
deleted file mode 100644
index 9589969cec72..000000000000
--- a/arch/ppc/boot/common/misc-common.c
+++ /dev/null
@@ -1,555 +0,0 @@
-/*
- * Misc. bootloader code (almost) all platforms can use
- *
- * Author: Johnnie Peters <jpeters@mvista.com>
- * Editor: Tom Rini <trini@mvista.com>
- *
- * Derived from arch/ppc/boot/prep/misc.c
- *
- * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <stdarg.h>	/* for va_ bits */
-#include <linux/string.h>
-#include <linux/zlib.h>
-#include "nonstdio.h"
-
-/* If we're on a PReP, assume we have a keyboard controller
- * Also note, if we're not PReP, we assume you are a serial
- * console - Tom */
-#if defined(CONFIG_PPC_PREP) && defined(CONFIG_VGA_CONSOLE)
-extern void cursor(int x, int y);
-extern void scroll(void);
-extern char *vidmem;
-extern int lines, cols;
-extern int orig_x, orig_y;
-extern int keyb_present;
-extern int CRT_tstc(void);
-extern int CRT_getc(void);
-#else
-int cursor(int x, int y) {return 0;}
-void scroll(void) {}
-char vidmem[1];
-#define lines 0
-#define cols 0
-int orig_x = 0;
-int orig_y = 0;
-#define keyb_present 0
-int CRT_tstc(void) {return 0;}
-int CRT_getc(void) {return 0;}
-#endif
-
-extern char *avail_ram;
-extern char *end_avail;
-extern char _end[];
-
-void puts(const char *);
-void putc(const char c);
-void puthex(unsigned long val);
-void gunzip(void *, int, unsigned char *, int *);
-static int _cvt(unsigned long val, char *buf, long radix, char *digits);
-
-void _vprintk(void(*putc)(const char), const char *fmt0, va_list ap);
-unsigned char *ISA_io = NULL;
-
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
-	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-extern unsigned long com_port;
-
-extern int serial_tstc(unsigned long com_port);
-extern unsigned char serial_getc(unsigned long com_port);
-extern void serial_putc(unsigned long com_port, unsigned char c);
-#endif
-
-void pause(void)
-{
-	puts("pause\n");
-}
-
-void exit(void)
-{
-	puts("exit\n");
-	while(1);
-}
-
-int tstc(void)
-{
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
-	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-	if(keyb_present)
-		return (CRT_tstc() || serial_tstc(com_port));
-	else
-		return (serial_tstc(com_port));
-#else
-	return CRT_tstc();
-#endif
-}
-
-int getc(void)
-{
-	while (1) {
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
-	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-		if (serial_tstc(com_port))
-			return (serial_getc(com_port));
-#endif /* serial console */
-		if (keyb_present)
-			if(CRT_tstc())
-				return (CRT_getc());
-	}
-}
-
-void
-putc(const char c)
-{
-	int x,y;
-
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
-	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-	serial_putc(com_port, c);
-	if ( c == '\n' )
-		serial_putc(com_port, '\r');
-#endif /* serial console */
-
-	x = orig_x;
-	y = orig_y;
-
-	if ( c == '\n' ) {
-		x = 0;
-		if ( ++y >= lines ) {
-			scroll();
-			y--;
-		}
-	} else if (c == '\r') {
-		x = 0;
-	} else if (c == '\b') {
-		if (x > 0) {
-			x--;
-		}
-	} else {
-		vidmem [ ( x + cols * y ) * 2 ] = c;
-		if ( ++x >= cols ) {
-			x = 0;
-			if ( ++y >= lines ) {
-				scroll();
-				y--;
-			}
-		}
-	}
-
-	cursor(x, y);
-
-	orig_x = x;
-	orig_y = y;
-}
-
-void puts(const char *s)
-{
-	int x,y;
-	char c;
-
-	x = orig_x;
-	y = orig_y;
-
-	while ( ( c = *s++ ) != '\0' ) {
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE) \
-	|| defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-	        serial_putc(com_port, c);
-	        if ( c == '\n' ) serial_putc(com_port, '\r');
-#endif /* serial console */
-
-		if ( c == '\n' ) {
-			x = 0;
-			if ( ++y >= lines ) {
-				scroll();
-				y--;
-			}
-		} else if (c == '\b') {
-		  if (x > 0) {
-		    x--;
-		  }
-		} else {
-			vidmem [ ( x + cols * y ) * 2 ] = c;
-			if ( ++x >= cols ) {
-				x = 0;
-				if ( ++y >= lines ) {
-					scroll();
-					y--;
-				}
-			}
-		}
-	}
-
-	cursor(x, y);
-
-	orig_x = x;
-	orig_y = y;
-}
-
-void error(char *x)
-{
-	puts("\n\n");
-	puts(x);
-	puts("\n\n -- System halted");
-
-	while(1);	/* Halt */
-}
-
-static void *zalloc(unsigned size)
-{
-	void *p = avail_ram;
-
-	size = (size + 7) & -8;
-	avail_ram += size;
-	if (avail_ram > end_avail) {
-		puts("oops... out of memory\n");
-		pause();
-	}
-	return p;
-}
-
-#define HEAD_CRC	2
-#define EXTRA_FIELD	4
-#define ORIG_NAME	8
-#define COMMENT		0x10
-#define RESERVED	0xe0
-
-void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
-{
-	z_stream s;
-	int r, i, flags;
-
-	/* skip header */
-	i = 10;
-	flags = src[3];
-	if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) {
-		puts("bad gzipped data\n");
-		exit();
-	}
-	if ((flags & EXTRA_FIELD) != 0)
-		i = 12 + src[10] + (src[11] << 8);
-	if ((flags & ORIG_NAME) != 0)
-		while (src[i++] != 0)
-			;
-	if ((flags & COMMENT) != 0)
-		while (src[i++] != 0)
-			;
-	if ((flags & HEAD_CRC) != 0)
-		i += 2;
-	if (i >= *lenp) {
-		puts("gunzip: ran out of data in header\n");
-		exit();
-	}
-
-	/* Initialize ourself. */
-	s.workspace = zalloc(zlib_inflate_workspacesize());
-	r = zlib_inflateInit2(&s, -MAX_WBITS);
-	if (r != Z_OK) {
-		puts("zlib_inflateInit2 returned "); puthex(r); puts("\n");
-		exit();
-	}
-	s.next_in = src + i;
-	s.avail_in = *lenp - i;
-	s.next_out = dst;
-	s.avail_out = dstlen;
-	r = zlib_inflate(&s, Z_FINISH);
-	if (r != Z_OK && r != Z_STREAM_END) {
-		puts("inflate returned "); puthex(r); puts("\n");
-		exit();
-	}
-	*lenp = s.next_out - (unsigned char *) dst;
-	zlib_inflateEnd(&s);
-}
-
-void
-puthex(unsigned long val)
-{
-
-	unsigned char buf[10];
-	int i;
-	for (i = 7;  i >= 0;  i--)
-	{
-		buf[i] = "0123456789ABCDEF"[val & 0x0F];
-		val >>= 4;
-	}
-	buf[8] = '\0';
-	puts(buf);
-}
-
-#define FALSE 0
-#define TRUE  1
-
-void
-_printk(char const *fmt, ...)
-{
-	va_list ap;
-
-	va_start(ap, fmt);
-	_vprintk(putc, fmt, ap);
-	va_end(ap);
-	return;
-}
-
-#define is_digit(c) ((c >= '0') && (c <= '9'))
-
-void
-_vprintk(void(*putc)(const char), const char *fmt0, va_list ap)
-{
-	char c, sign, *cp = 0;
-	int left_prec, right_prec, zero_fill, length = 0, pad, pad_on_right;
-	char buf[32];
-	long val;
-	while ((c = *fmt0++))
-	{
-		if (c == '%')
-		{
-			c = *fmt0++;
-			left_prec = right_prec = pad_on_right = 0;
-			if (c == '-')
-			{
-				c = *fmt0++;
-				pad_on_right++;
-			}
-			if (c == '0')
-			{
-				zero_fill = TRUE;
-				c = *fmt0++;
-			} else
-			{
-				zero_fill = FALSE;
-			}
-			while (is_digit(c))
-			{
-				left_prec = (left_prec * 10) + (c - '0');
-				c = *fmt0++;
-			}
-			if (c == '.')
-			{
-				c = *fmt0++;
-				zero_fill++;
-				while (is_digit(c))
-				{
-					right_prec = (right_prec * 10) + (c - '0');
-					c = *fmt0++;
-				}
-			} else
-			{
-				right_prec = left_prec;
-			}
-			sign = '\0';
-			switch (c)
-			{
-			case 'd':
-			case 'x':
-			case 'X':
-				val = va_arg(ap, long);
-				switch (c)
-				{
-				case 'd':
-					if (val < 0)
-					{
-						sign = '-';
-						val = -val;
-					}
-					length = _cvt(val, buf, 10, "0123456789");
-					break;
-				case 'x':
-					length = _cvt(val, buf, 16, "0123456789abcdef");
-					break;
-				case 'X':
-					length = _cvt(val, buf, 16, "0123456789ABCDEF");
-					break;
-				}
-				cp = buf;
-				break;
-			case 's':
-				cp = va_arg(ap, char *);
-				length = strlen(cp);
-				break;
-			case 'c':
-				c = va_arg(ap, long /*char*/);
-				(*putc)(c);
-				continue;
-			default:
-				(*putc)('?');
-			}
-			pad = left_prec - length;
-			if (sign != '\0')
-			{
-				pad--;
-			}
-			if (zero_fill)
-			{
-				c = '0';
-				if (sign != '\0')
-				{
-					(*putc)(sign);
-					sign = '\0';
-				}
-			} else
-			{
-				c = ' ';
-			}
-			if (!pad_on_right)
-			{
-				while (pad-- > 0)
-				{
-					(*putc)(c);
-				}
-			}
-			if (sign != '\0')
-			{
-				(*putc)(sign);
-			}
-			while (length-- > 0)
-			{
-				(*putc)(c = *cp++);
-				if (c == '\n')
-				{
-					(*putc)('\r');
-				}
-			}
-			if (pad_on_right)
-			{
-				while (pad-- > 0)
-				{
-					(*putc)(c);
-				}
-			}
-		} else
-		{
-			(*putc)(c);
-			if (c == '\n')
-			{
-				(*putc)('\r');
-			}
-		}
-	}
-}
-
-int
-_cvt(unsigned long val, char *buf, long radix, char *digits)
-{
-	char temp[80];
-	char *cp = temp;
-	int length = 0;
-	if (val == 0)
-	{ /* Special case */
-		*cp++ = '0';
-	} else
-		while (val)
-		{
-			*cp++ = digits[val % radix];
-			val /= radix;
-		}
-	while (cp != temp)
-	{
-		*buf++ = *--cp;
-		length++;
-	}
-	*buf = '\0';
-	return (length);
-}
-
-void
-_dump_buf_with_offset(unsigned char *p, int s, unsigned char *base)
-{
-	int i, c;
-	if ((unsigned int)s > (unsigned int)p)
-	{
-		s = (unsigned int)s - (unsigned int)p;
-	}
-	while (s > 0)
-	{
-		if (base)
-		{
-			_printk("%06X: ", (int)p - (int)base);
-		} else
-		{
-			_printk("%06X: ", p);
-		}
-		for (i = 0;  i < 16;  i++)
-		{
-			if (i < s)
-			{
-				_printk("%02X", p[i] & 0xFF);
-			} else
-			{
-				_printk("  ");
-			}
-			if ((i % 2) == 1) _printk(" ");
-			if ((i % 8) == 7) _printk(" ");
-		}
-		_printk(" |");
-		for (i = 0;  i < 16;  i++)
-		{
-			if (i < s)
-			{
-				c = p[i] & 0xFF;
-				if ((c < 0x20) || (c >= 0x7F)) c = '.';
-			} else
-			{
-				c = ' ';
-			}
-			_printk("%c", c);
-		}
-		_printk("|\n");
-		s -= 16;
-		p += 16;
-	}
-}
-
-void
-_dump_buf(unsigned char *p, int s)
-{
-	_printk("\n");
-	_dump_buf_with_offset(p, s, 0);
-}
-
-/* Very simple inb/outb routines.  We declare ISA_io to be 0 above, and
- * then modify it on platforms which need to.  We do it like this
- * because on some platforms we give inb/outb an exact location, and
- * on others it's an offset from a given location. -- Tom
- */
-
-void ISA_init(unsigned long base)
-{
-	ISA_io = (unsigned char *)base;
-}
-
-void
-outb(int port, unsigned char val)
-{
-	/* Ensure I/O operations complete */
-	__asm__ volatile("eieio");
-	ISA_io[port] = val;
-}
-
-unsigned char
-inb(int port)
-{
-	/* Ensure I/O operations complete */
-	__asm__ volatile("eieio");
-	return (ISA_io[port]);
-}
-
-/*
- * Local variables:
- *  c-indent-level: 8
- *  c-basic-offset: 8
- *  tab-width: 8
- * End:
- */
diff --git a/arch/ppc/boot/common/ns16550.c b/arch/ppc/boot/common/ns16550.c
deleted file mode 100644
index fc5b72041948..000000000000
--- a/arch/ppc/boot/common/ns16550.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * COM1 NS16550 support
- */
-
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serial_reg.h>
-#include <asm/serial.h>
-
-#if defined(CONFIG_XILINX_VIRTEX)
-#include <platforms/4xx/xparameters/xparameters.h>
-#endif
-#include "nonstdio.h"
-#include "serial.h"
-
-#define SERIAL_BAUD	9600
-
-extern unsigned long ISA_io;
-
-static struct serial_state rs_table[RS_TABLE_SIZE] = {
-	SERIAL_PORT_DFNS	/* Defined in <asm/serial.h> */
-};
-
-static int shift;
-
-unsigned long serial_init(int chan, void *ignored)
-{
-	unsigned long com_port, base_baud;
-	unsigned char lcr, dlm;
-
-	/* We need to find out which type io we're expecting.  If it's
-	 * 'SERIAL_IO_PORT', we get an offset from the isa_io_base.
-	 * If it's 'SERIAL_IO_MEM', we can the exact location.  -- Tom */
-	switch (rs_table[chan].io_type) {
-		case SERIAL_IO_PORT:
-			com_port = rs_table[chan].port;
-			break;
-		case SERIAL_IO_MEM:
-			com_port = (unsigned long)rs_table[chan].iomem_base;
-			break;
-		default:
-			/* We can't deal with it. */
-			return -1;
-	}
-
-	/* How far apart the registers are. */
-	shift = rs_table[chan].iomem_reg_shift;
-	/* Base baud.. */
-	base_baud = rs_table[chan].baud_base;
-	
-	/* save the LCR */
-	lcr = inb(com_port + (UART_LCR << shift));
-	/* Access baud rate */
-	outb(com_port + (UART_LCR << shift), 0x80);
-	dlm = inb(com_port + (UART_DLM << shift));
-	/*
-	 * Test if serial port is unconfigured.
-	 * We assume that no-one uses less than 110 baud or
-	 * less than 7 bits per character these days.
-	 *  -- paulus.
-	 */
-
-	if ((dlm <= 4) && (lcr & 2))
-		/* port is configured, put the old LCR back */
-		outb(com_port + (UART_LCR << shift), lcr);
-	else {
-		/* Input clock. */
-		outb(com_port + (UART_DLL << shift),
-		     (base_baud / SERIAL_BAUD) & 0xFF);
-		outb(com_port + (UART_DLM << shift),
-		     (base_baud / SERIAL_BAUD) >> 8);
-		/* 8 data, 1 stop, no parity */
-		outb(com_port + (UART_LCR << shift), 0x03);
-		/* RTS/DTR */
-		outb(com_port + (UART_MCR << shift), 0x03);
-	}
-	/* Clear & enable FIFOs */
-	outb(com_port + (UART_FCR << shift), 0x07);
-
-	return (com_port);
-}
-
-void
-serial_putc(unsigned long com_port, unsigned char c)
-{
-	while ((inb(com_port + (UART_LSR << shift)) & UART_LSR_THRE) == 0)
-		;
-	outb(com_port, c);
-}
-
-unsigned char
-serial_getc(unsigned long com_port)
-{
-	while ((inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) == 0)
-		;
-	return inb(com_port);
-}
-
-int
-serial_tstc(unsigned long com_port)
-{
-	return ((inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) != 0);
-}
diff --git a/arch/ppc/boot/common/serial_stub.c b/arch/ppc/boot/common/serial_stub.c
deleted file mode 100644
index 5cc9ae66a8ba..000000000000
--- a/arch/ppc/boot/common/serial_stub.c
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * This is a few stub routines to make the boot code cleaner looking when
- * there is no serial port support doesn't need to be closed, for example.
- *
- * Author: Tom Rini <trini@mvista.com>
- *
- * 2003 (c) MontaVista, Software, Inc.  This file is licensed under the terms
- * of the GNU General Public License version 2.  This program is licensed "as
- * is" without any warranty of any kind, whether express or implied.
- */
-
-unsigned long __attribute__ ((weak))
-serial_init(int chan, void *ignored)
-{
-	return 0;
-}
-
-void __attribute__ ((weak))
-serial_close(unsigned long com_port)
-{
-}
diff --git a/arch/ppc/boot/common/string.S b/arch/ppc/boot/common/string.S
deleted file mode 100644
index 8016e43c4771..000000000000
--- a/arch/ppc/boot/common/string.S
+++ /dev/null
@@ -1,150 +0,0 @@
-/*
- * String handling functions for PowerPC.
- *
- * Copyright (C) 1996 Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#define r0	0
-#define r3	3
-#define r4	4
-#define r5	5
-#define r6	6
-#define r7	7
-#define r8	8
-
-	.globl	strlen
-strlen:
-	addi	r4,r3,-1
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	bne	1b
-	subf	r3,r3,r4
-	blr
-
-	.globl	memset
-memset:
-	rlwimi	r4,r4,8,16,23
-	rlwimi	r4,r4,16,0,15
-	addi	r6,r3,-4
-	cmplwi	0,r5,4
-	blt	7f
-	stwu	r4,4(r6)
-	beqlr
-	andi.	r0,r6,3
-	add	r5,r0,r5
-	subf	r6,r0,r6
-	rlwinm	r0,r5,32-2,2,31
-	mtctr	r0
-	bdz	6f
-1:	stwu	r4,4(r6)
-	bdnz	1b
-6:	andi.	r5,r5,3
-7:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r6,r6,3
-8:	stbu	r4,1(r6)
-	bdnz	8b
-	blr
-
-	.globl	memmove
-memmove:
-	cmplw	0,r3,r4
-	bgt	backwards_memcpy
-	/* fall through */
-
-	.globl	memcpy
-memcpy:
-	rlwinm.	r7,r5,32-3,3,31		/* r0 = r5 >> 3 */
-	addi	r6,r3,-4
-	addi	r4,r4,-4
-	beq	2f			/* if less than 8 bytes to do */
-	andi.	r0,r6,3			/* get dest word aligned */
-	mtctr	r7
-	bne	5f
-1:	lwz	r7,4(r4)
-	lwzu	r8,8(r4)
-	stw	r7,4(r6)
-	stwu	r8,8(r6)
-	bdnz	1b
-	andi.	r5,r5,7
-2:	cmplwi	0,r5,4
-	blt	3f
-	lwzu	r0,4(r4)
-	addi	r5,r5,-4
-	stwu	r0,4(r6)
-3:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r4,r4,3
-	addi	r6,r6,3
-4:	lbzu	r0,1(r4)
-	stbu	r0,1(r6)
-	bdnz	4b
-	blr
-5:	subfic	r0,r0,4
-	mtctr	r0
-6:	lbz	r7,4(r4)
-	addi	r4,r4,1
-	stb	r7,4(r6)
-	addi	r6,r6,1
-	bdnz	6b
-	subf	r5,r0,r5
-	rlwinm.	r7,r5,32-3,3,31
-	beq	2b
-	mtctr	r7
-	b	1b
-
-	.globl	backwards_memcpy
-backwards_memcpy:
-	rlwinm.	r7,r5,32-3,3,31		/* r0 = r5 >> 3 */
-	add	r6,r3,r5
-	add	r4,r4,r5
-	beq	2f
-	andi.	r0,r6,3
-	mtctr	r7
-	bne	5f
-1:	lwz	r7,-4(r4)
-	lwzu	r8,-8(r4)
-	stw	r7,-4(r6)
-	stwu	r8,-8(r6)
-	bdnz	1b
-	andi.	r5,r5,7
-2:	cmplwi	0,r5,4
-	blt	3f
-	lwzu	r0,-4(r4)
-	subi	r5,r5,4
-	stwu	r0,-4(r6)
-3:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-4:	lbzu	r0,-1(r4)
-	stbu	r0,-1(r6)
-	bdnz	4b
-	blr
-5:	mtctr	r0
-6:	lbzu	r7,-1(r4)
-	stbu	r7,-1(r6)
-	bdnz	6b
-	subf	r5,r0,r5
-	rlwinm.	r7,r5,32-3,3,31
-	beq	2b
-	mtctr	r7
-	b	1b
-
-	.globl	memcmp
-memcmp:
-	cmpwi	0,r5,0
-	blelr
-	mtctr	r5
-	addi	r6,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r3,1(r6)
-	lbzu	r0,1(r4)
-	subf.	r3,r0,r3
-	bdnzt	2,1b
-	blr
diff --git a/arch/ppc/boot/common/util.S b/arch/ppc/boot/common/util.S
deleted file mode 100644
index 0c5e43c4ae06..000000000000
--- a/arch/ppc/boot/common/util.S
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * Useful bootup functions, which are more easily done in asm than C.
- *
- * NOTE:  Be very very careful about the registers you use here.
- *	We don't follow any ABI calling convention among the
- *	assembler functions that call each other, especially early
- *	in the initialization.  Please preserve at least r3 and r4
- *	for these early functions, as they often contain information
- *	passed from boot roms into the C decompress function.
- *
- * Author: Tom Rini
- *	   trini@mvista.com
- * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others).
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/ppc_asm.h>
-
-
-	.text
-
-#ifdef CONFIG_6xx
-	.globl	disable_6xx_mmu
-disable_6xx_mmu:
-	/* Establish default MSR value, exception prefix 0xFFF.
-	 * If necessary, this function must fix up the LR if we
-	 * return to a different address space once the MMU is
-	 * disabled.
-	 */
-	li	r8,MSR_IP|MSR_FP
-	mtmsr	r8
-	isync
-
-	/* Test for a 601 */
-	mfpvr	r10
-	srwi	r10,r10,16
-	cmpwi	0,r10,1		/* 601 ? */
-	beq	.clearbats_601
-
-	/* Clear BATs */
-	li	r8,0
-	mtspr	SPRN_DBAT0U,r8
-	mtspr	SPRN_DBAT0L,r8
-	mtspr	SPRN_DBAT1U,r8
-	mtspr	SPRN_DBAT1L,r8
-	mtspr	SPRN_DBAT2U,r8
-	mtspr	SPRN_DBAT2L,r8
-	mtspr	SPRN_DBAT3U,r8
-	mtspr	SPRN_DBAT3L,r8
-.clearbats_601:
-	mtspr	SPRN_IBAT0U,r8
-	mtspr	SPRN_IBAT0L,r8
-	mtspr	SPRN_IBAT1U,r8
-	mtspr	SPRN_IBAT1L,r8
-	mtspr	SPRN_IBAT2U,r8
-	mtspr	SPRN_IBAT2L,r8
-	mtspr	SPRN_IBAT3U,r8
-	mtspr	SPRN_IBAT3L,r8
-	isync
-	sync
-	sync
-
-	/* Set segment registers */
-	li	r8,16		/* load up segment register values */
-	mtctr	r8		/* for context 0 */
-	lis	r8,0x2000	/* Ku = 1, VSID = 0 */
-	li	r10,0
-3:	mtsrin	r8,r10
-	addi	r8,r8,0x111	/* increment VSID */
-	addis	r10,r10,0x1000	/* address of next segment */
-	bdnz	3b
-	blr
-
-	.globl	disable_6xx_l1cache
-disable_6xx_l1cache:
-	/* Enable, invalidate and then disable the L1 icache/dcache. */
-	li	r8,0
-	ori	r8,r8,(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI)
-	mfspr	r11,SPRN_HID0
-	or	r11,r11,r8
-	andc	r10,r11,r8
-	isync
-	mtspr	SPRN_HID0,r8
-	sync
-	isync
-	mtspr	SPRN_HID0,r10
-	sync
-	isync
-	blr
-#endif
-
-	.globl	_setup_L2CR
-_setup_L2CR:
-/*
- * We should be skipping this section on CPUs where this results in an
- * illegal instruction.  If not, please send trini@kernel.crashing.org
- * the PVR of your CPU.
- */
-	/* Invalidate/disable L2 cache */
-	sync
-	isync
-	mfspr	r8,SPRN_L2CR
-	rlwinm	r8,r8,0,1,31
-	oris	r8,r8,L2CR_L2I@h
-	sync
-	isync
-	mtspr	SPRN_L2CR,r8
-	sync
-	isync
-
-	/* Wait for the invalidation to complete */
-	mfspr   r8,SPRN_PVR
-	srwi    r8,r8,16
-	cmplwi	cr0,r8,0x8000			/* 7450 */
-	cmplwi	cr1,r8,0x8001			/* 7455 */
-	cmplwi	cr2,r8,0x8002			/* 7457 */
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq	/* Now test if any are true. */
-	cror	4*cr0+eq,4*cr0+eq,4*cr2+eq
-	bne     2f
-
-1:	mfspr	r8,SPRN_L2CR	/* On 745x, poll L2I bit (bit 10) */
-	rlwinm.	r9,r8,0,10,10
-	bne	1b
-	b	3f
-
-2:      mfspr   r8,SPRN_L2CR	/* On 75x & 74[01]0, poll L2IP bit (bit 31) */
-	rlwinm. r9,r8,0,31,31
-	bne     2b
-
-3:	rlwinm	r8,r8,0,11,9	/* Turn off L2I bit */
-	sync
-	isync
-	mtspr	SPRN_L2CR,r8
-	sync
-	isync
-	blr
-
-	.globl	_setup_L3CR
-_setup_L3CR:
-	/* Invalidate/disable L3 cache */
-	sync
-	isync
-	mfspr	r8,SPRN_L3CR
-	rlwinm	r8,r8,0,1,31
-	ori	r8,r8,L3CR_L3I@l
-	sync
-	isync
-	mtspr	SPRN_L3CR,r8
-	sync
-	isync
-
-	/* Wait for the invalidation to complete */
-1:	mfspr	r8,SPRN_L3CR
-	rlwinm.	r9,r8,0,21,21
-	bne	1b
-
-	rlwinm	r8,r8,0,22,20		/* Turn off L3I bit */
-	sync
-	isync
-	mtspr	SPRN_L3CR,r8
-	sync
-	isync
-	blr
-
-
-/* udelay (on non-601 processors) needs to know the period of the
- * timebase in nanoseconds.  This used to be hardcoded to be 60ns
- * (period of 66MHz/4).  Now a variable is used that is initialized to
- * 60 for backward compatibility, but it can be overridden as necessary
- * with code something like this:
- *    extern unsigned long timebase_period_ns;
- *    timebase_period_ns = 1000000000 / bd->bi_tbfreq;
- */
-	.data
-	.globl timebase_period_ns
-timebase_period_ns:
-	.long	60
-
-	.text
-/*
- * Delay for a number of microseconds
- */
-	.globl	udelay
-udelay:
-	mfspr	r4,SPRN_PVR
-	srwi	r4,r4,16
-	cmpwi	0,r4,1		/* 601 ? */
-	bne	.udelay_not_601
-00:	li	r0,86	/* Instructions / microsecond? */
-	mtctr	r0
-10:	addi	r0,r0,0 /* NOP */
-	bdnz	10b
-	subic.	r3,r3,1
-	bne	00b
-	blr
-
-.udelay_not_601:
-	mulli	r4,r3,1000	/* nanoseconds */
-	/*  Change r4 to be the number of ticks using:	
-	 *	(nanoseconds + (timebase_period_ns - 1 )) / timebase_period_ns
-	 *  timebase_period_ns defaults to 60 (16.6MHz) */
-	lis	r5,timebase_period_ns@ha
-	lwz	r5,timebase_period_ns@l(r5)
-	add	r4,r4,r5
-	addi	r4,r4,-1
-	divw	r4,r4,r5	/* BUS ticks */
-1:	mftbu	r5
-	mftb	r6
-	mftbu	r7
-	cmpw	0,r5,r7
-	bne	1b		/* Get [synced] base time */
-	addc	r9,r6,r4	/* Compute end time */
-	addze	r8,r5
-2:	mftbu	r5
-	cmpw	0,r5,r8
-	blt	2b
-	bgt	3f
-	mftb	r6
-	cmpw	0,r6,r9
-	blt	2b
-3:	blr
-
-	.section ".relocate_code","xa"
-/*
- * Flush and enable instruction cache
- * First, flush the data cache in case it was enabled and may be
- * holding instructions for copy back.
- */
-        .globl flush_instruction_cache
-flush_instruction_cache:        
-	mflr	r6
-	bl	flush_data_cache
-
-#ifdef CONFIG_8xx
-	lis	r3, IDC_INVALL@h
-	mtspr	SPRN_IC_CST, r3
-	lis	r3, IDC_ENABLE@h
-	mtspr	SPRN_IC_CST, r3
-	lis	r3, IDC_DISABLE@h
-	mtspr	SPRN_DC_CST, r3
-#elif CONFIG_4xx
-	lis	r3,start@h		# r9 = &_start
-	lis	r4,_etext@ha
-	addi	r4,r4,_etext@l		# r8 = &_etext
-1:	dcbf	r0,r3			# Flush the data cache
-	icbi	r0,r3			# Invalidate the instruction cache
-	addi	r3,r3,0x10		# Increment by one cache line
-	cmplw	cr0,r3,r4		# Are we at the end yet?
-	blt	1b			# No, keep flushing and invalidating
-#else
-	/* Enable, invalidate and then disable the L1 icache/dcache. */
-	li	r3,0
-	ori	r3,r3,(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI)
-	mfspr	r4,SPRN_HID0
-	or	r5,r4,r3
-	isync
-	mtspr	SPRN_HID0,r5
-	sync
-	isync
-	ori	r5,r4,HID0_ICE	/* Enable cache */
-	mtspr	SPRN_HID0,r5
-	sync
-	isync
-#endif
-	mtlr	r6
-	blr
-
-#define NUM_CACHE_LINES 128*8
-#define cache_flush_buffer 0x1000
-
-/*
- * Flush data cache
- * Do this by just reading lots of stuff into the cache.
- */
-        .globl flush_data_cache
-flush_data_cache:       
-	lis	r3,cache_flush_buffer@h
-	ori	r3,r3,cache_flush_buffer@l
-	li	r4,NUM_CACHE_LINES
-	mtctr	r4
-00:	lwz	r4,0(r3)
-	addi	r3,r3,L1_CACHE_BYTES	/* Next line, please */
-	bdnz	00b
-10:	blr
-
-	.previous
-
diff --git a/arch/ppc/boot/images/.gitignore b/arch/ppc/boot/images/.gitignore
deleted file mode 100644
index 21c2dc5b6b78..000000000000
--- a/arch/ppc/boot/images/.gitignore
+++ /dev/null
@@ -1,6 +0,0 @@
-sImage
-vmapus
-vmlinux*
-miboot*
-zImage*
-uImage
diff --git a/arch/ppc/boot/images/Makefile b/arch/ppc/boot/images/Makefile
deleted file mode 100644
index 58415d5718e3..000000000000
--- a/arch/ppc/boot/images/Makefile
+++ /dev/null
@@ -1,34 +0,0 @@
-#
-# This dir holds all of the images for PPC machines.
-# Tom Rini	January 2001
-
-MKIMAGE		:= $(srctree)/scripts/mkuboot.sh
-
-extra-y		:= vmlinux.bin vmlinux.gz
-
-# two make processes may write to vmlinux.gz at the same time with make -j
-quiet_cmd_mygzip = GZIP    $@
-cmd_mygzip = gzip -f -9 < $< > $@.$$$$ && mv $@.$$$$ $@
-
-
-OBJCOPYFLAGS_vmlinux.bin := -O binary
-$(obj)/vmlinux.bin: vmlinux FORCE
-	$(call if_changed,objcopy)
-
-$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
-	$(call if_changed,mygzip)
-
-quiet_cmd_uimage = UIMAGE  $@
-      cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \
-               -C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \
-               -d $< $@
-
-targets += uImage
-$(obj)/uImage: $(obj)/vmlinux.gz
-	$(Q)rm -f $@
-	$(call cmd,uimage)
-	@echo -n '  Image: $@ '
-	@if [ -f $@ ]; then echo 'is ready' ; else echo 'not made'; fi
-
-# Files generated that shall be removed upon make clean
-clean-files	:= sImage vmapus vmlinux* miboot* zImage* uImage
diff --git a/arch/ppc/boot/include/cpc700.h b/arch/ppc/boot/include/cpc700.h
deleted file mode 100644
index 28cfcde44909..000000000000
--- a/arch/ppc/boot/include/cpc700.h
+++ /dev/null
@@ -1,26 +0,0 @@
-
-#ifndef __PPC_BOOT_CPC700_H
-#define __PPC_BOOT_CPC700_H
-
-#define CPC700_MEM_CFGADDR    0xff500008
-#define CPC700_MEM_CFGDATA    0xff50000c
-
-#define CPC700_MB0SA            0x38
-#define CPC700_MB0EA            0x58
-#define CPC700_MB1SA            0x3c
-#define CPC700_MB1EA            0x5c
-#define CPC700_MB2SA            0x40
-#define CPC700_MB2EA            0x60
-#define CPC700_MB3SA            0x44
-#define CPC700_MB3EA            0x64
-#define CPC700_MB4SA            0x48
-#define CPC700_MB4EA            0x68
-
-static inline long
-cpc700_read_memreg(int reg)
-{
-	out_be32((volatile unsigned int *) CPC700_MEM_CFGADDR, reg);
-	return in_be32((volatile unsigned int *) CPC700_MEM_CFGDATA);
-}
-
-#endif
diff --git a/arch/ppc/boot/include/iso_font.h b/arch/ppc/boot/include/iso_font.h
deleted file mode 100644
index bff050e002b7..000000000000
--- a/arch/ppc/boot/include/iso_font.h
+++ /dev/null
@@ -1,257 +0,0 @@
-static const unsigned char font[] = {
-/* 0x00 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x01 */ 0x00,0x00,0x7E,0x81,0xA5,0x81,0x81,0xBD,0x99,0x81,0x81,0x7E,0x00,0x00,0x00,0x00,
-/* 0x02 */ 0x00,0x00,0x7E,0xFF,0xDB,0xFF,0xFF,0xC3,0xC3,0xE7,0xFF,0x7E,0x00,0x00,0x00,0x00,
-/* 0x03 */ 0x00,0x00,0x00,0x00,0x6C,0xFE,0xFE,0xFE,0xFE,0x7C,0x38,0x10,0x00,0x00,0x00,0x00,
-/* 0x04 */ 0x00,0x00,0x00,0x00,0x10,0x38,0x7C,0xFE,0x7C,0x38,0x10,0x00,0x00,0x00,0x00,0x00,
-/* 0x05 */ 0x00,0x00,0x00,0x18,0x3C,0x3C,0xE7,0xE7,0xE7,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x06 */ 0x00,0x00,0x00,0x18,0x3C,0x7E,0xFF,0xFF,0x7E,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x07 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x3C,0x3C,0x18,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x08 */ 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE7,0xC3,0xC3,0xE7,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-/* 0x09 */ 0x00,0x00,0x00,0x00,0x00,0x3C,0x66,0x42,0x42,0x66,0x3C,0x00,0x00,0x00,0x00,0x00,
-/* 0x0A */ 0xFF,0xFF,0xFF,0xFF,0xFF,0xC3,0x99,0xBD,0xBD,0x99,0xC3,0xFF,0xFF,0xFF,0xFF,0xFF,
-/* 0x0B */ 0x00,0x00,0x3E,0x0E,0x1A,0x32,0x78,0xCC,0xCC,0xCC,0xCC,0x78,0x00,0x00,0x00,0x00,
-/* 0x0C */ 0x00,0x00,0x3C,0x66,0x66,0x66,0x66,0x3C,0x18,0x7E,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x0D */ 0x00,0x00,0x30,0x38,0x3C,0x36,0x33,0x30,0x30,0x70,0xF0,0xE0,0x00,0x00,0x00,0x00,
-/* 0x0E */ 0x00,0x00,0x7F,0x63,0x7F,0x63,0x63,0x63,0x63,0x67,0xE7,0xE6,0xC0,0x00,0x00,0x00,
-/* 0x0F */ 0x00,0x00,0x00,0x18,0x18,0xDB,0x3C,0xE7,0x3C,0xDB,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x10 */ 0x00,0x80,0xC0,0xE0,0xF0,0xF8,0xFE,0xF8,0xF0,0xE0,0xC0,0x80,0x00,0x00,0x00,0x00,
-/* 0x11 */ 0x00,0x02,0x06,0x0E,0x1E,0x3E,0xFE,0x3E,0x1E,0x0E,0x06,0x02,0x00,0x00,0x00,0x00,
-/* 0x12 */ 0x00,0x00,0x18,0x3C,0x7E,0x18,0x18,0x18,0x7E,0x3C,0x18,0x00,0x00,0x00,0x00,0x00,
-/* 0x13 */ 0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x66,0x66,0x00,0x00,0x00,0x00,
-/* 0x14 */ 0x00,0x00,0x7F,0xDB,0xDB,0xDB,0x7B,0x1B,0x1B,0x1B,0x1B,0x1B,0x00,0x00,0x00,0x00,
-/* 0x15 */ 0x00,0x7C,0xC6,0x60,0x38,0x6C,0xC6,0xC6,0x6C,0x38,0x0C,0xC6,0x7C,0x00,0x00,0x00,
-/* 0x16 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0xFE,0xFE,0x00,0x00,0x00,0x00,
-/* 0x17 */ 0x00,0x00,0x18,0x3C,0x7E,0x18,0x18,0x18,0x7E,0x3C,0x18,0x7E,0x00,0x00,0x00,0x00,
-/* 0x18 */ 0x00,0x00,0x18,0x3C,0x7E,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x19 */ 0x00,0x00,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x7E,0x3C,0x18,0x00,0x00,0x00,0x00,
-/* 0x1A */ 0x00,0x00,0x00,0x00,0x00,0x18,0x0C,0xFE,0x0C,0x18,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x1B */ 0x00,0x00,0x00,0x00,0x00,0x30,0x60,0xFE,0x60,0x30,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x1C */ 0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xC0,0xC0,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x1D */ 0x00,0x00,0x00,0x00,0x00,0x28,0x6C,0xFE,0x6C,0x28,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x1E */ 0x00,0x00,0x00,0x00,0x10,0x38,0x38,0x7C,0x7C,0xFE,0xFE,0x00,0x00,0x00,0x00,0x00,
-/* 0x1F */ 0x00,0x00,0x00,0x00,0xFE,0xFE,0x7C,0x7C,0x38,0x38,0x10,0x00,0x00,0x00,0x00,0x00,
-/* 0x20 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x21 */ 0x00,0x00,0x18,0x3C,0x3C,0x3C,0x18,0x18,0x18,0x00,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x22 */ 0x00,0x66,0x66,0x66,0x24,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x23 */ 0x00,0x00,0x00,0x6C,0x6C,0xFE,0x6C,0x6C,0x6C,0xFE,0x6C,0x6C,0x00,0x00,0x00,0x00,
-/* 0x24 */ 0x18,0x18,0x7C,0xC6,0xC2,0xC0,0x7C,0x06,0x06,0x86,0xC6,0x7C,0x18,0x18,0x00,0x00,
-/* 0x25 */ 0x00,0x00,0x00,0x00,0xC2,0xC6,0x0C,0x18,0x30,0x60,0xC6,0x86,0x00,0x00,0x00,0x00,
-/* 0x26 */ 0x00,0x00,0x38,0x6C,0x6C,0x38,0x76,0xDC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x27 */ 0x00,0x30,0x30,0x30,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x28 */ 0x00,0x00,0x0C,0x18,0x30,0x30,0x30,0x30,0x30,0x30,0x18,0x0C,0x00,0x00,0x00,0x00,
-/* 0x29 */ 0x00,0x00,0x30,0x18,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x18,0x30,0x00,0x00,0x00,0x00,
-/* 0x2A */ 0x00,0x00,0x00,0x00,0x00,0x66,0x3C,0xFF,0x3C,0x66,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x2B */ 0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x7E,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x2C */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x18,0x30,0x00,0x00,0x00,
-/* 0x2D */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x2E */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x2F */ 0x00,0x00,0x00,0x00,0x02,0x06,0x0C,0x18,0x30,0x60,0xC0,0x80,0x00,0x00,0x00,0x00,
-/* 0x30 */ 0x00,0x00,0x38,0x6C,0xC6,0xC6,0xD6,0xD6,0xC6,0xC6,0x6C,0x38,0x00,0x00,0x00,0x00,
-/* 0x31 */ 0x00,0x00,0x18,0x38,0x78,0x18,0x18,0x18,0x18,0x18,0x18,0x7E,0x00,0x00,0x00,0x00,
-/* 0x32 */ 0x00,0x00,0x7C,0xC6,0x06,0x0C,0x18,0x30,0x60,0xC0,0xC6,0xFE,0x00,0x00,0x00,0x00,
-/* 0x33 */ 0x00,0x00,0x7C,0xC6,0x06,0x06,0x3C,0x06,0x06,0x06,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x34 */ 0x00,0x00,0x0C,0x1C,0x3C,0x6C,0xCC,0xFE,0x0C,0x0C,0x0C,0x1E,0x00,0x00,0x00,0x00,
-/* 0x35 */ 0x00,0x00,0xFE,0xC0,0xC0,0xC0,0xFC,0x06,0x06,0x06,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x36 */ 0x00,0x00,0x38,0x60,0xC0,0xC0,0xFC,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x37 */ 0x00,0x00,0xFE,0xC6,0x06,0x06,0x0C,0x18,0x30,0x30,0x30,0x30,0x00,0x00,0x00,0x00,
-/* 0x38 */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0x7C,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x39 */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0x7E,0x06,0x06,0x06,0x0C,0x78,0x00,0x00,0x00,0x00,
-/* 0x3A */ 0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00,
-/* 0x3B */ 0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x18,0x18,0x30,0x00,0x00,0x00,0x00,
-/* 0x3C */ 0x00,0x00,0x00,0x06,0x0C,0x18,0x30,0x60,0x30,0x18,0x0C,0x06,0x00,0x00,0x00,0x00,
-/* 0x3D */ 0x00,0x00,0x00,0x00,0x00,0x7E,0x00,0x00,0x7E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x3E */ 0x00,0x00,0x00,0x60,0x30,0x18,0x0C,0x06,0x0C,0x18,0x30,0x60,0x00,0x00,0x00,0x00,
-/* 0x3F */ 0x00,0x00,0x7C,0xC6,0xC6,0x0C,0x18,0x18,0x18,0x00,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x40 */ 0x00,0x00,0x00,0x7C,0xC6,0xC6,0xDE,0xDE,0xDE,0xDC,0xC0,0x7C,0x00,0x00,0x00,0x00,
-/* 0x41 */ 0x00,0x00,0x10,0x38,0x6C,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x42 */ 0x00,0x00,0xFC,0x66,0x66,0x66,0x7C,0x66,0x66,0x66,0x66,0xFC,0x00,0x00,0x00,0x00,
-/* 0x43 */ 0x00,0x00,0x3C,0x66,0xC2,0xC0,0xC0,0xC0,0xC0,0xC2,0x66,0x3C,0x00,0x00,0x00,0x00,
-/* 0x44 */ 0x00,0x00,0xF8,0x6C,0x66,0x66,0x66,0x66,0x66,0x66,0x6C,0xF8,0x00,0x00,0x00,0x00,
-/* 0x45 */ 0x00,0x00,0xFE,0x66,0x62,0x68,0x78,0x68,0x60,0x62,0x66,0xFE,0x00,0x00,0x00,0x00,
-/* 0x46 */ 0x00,0x00,0xFE,0x66,0x62,0x68,0x78,0x68,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00,
-/* 0x47 */ 0x00,0x00,0x3C,0x66,0xC2,0xC0,0xC0,0xDE,0xC6,0xC6,0x66,0x3A,0x00,0x00,0x00,0x00,
-/* 0x48 */ 0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x49 */ 0x00,0x00,0x3C,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x4A */ 0x00,0x00,0x1E,0x0C,0x0C,0x0C,0x0C,0x0C,0xCC,0xCC,0xCC,0x78,0x00,0x00,0x00,0x00,
-/* 0x4B */ 0x00,0x00,0xE6,0x66,0x66,0x6C,0x78,0x78,0x6C,0x66,0x66,0xE6,0x00,0x00,0x00,0x00,
-/* 0x4C */ 0x00,0x00,0xF0,0x60,0x60,0x60,0x60,0x60,0x60,0x62,0x66,0xFE,0x00,0x00,0x00,0x00,
-/* 0x4D */ 0x00,0x00,0xC6,0xEE,0xFE,0xFE,0xD6,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x4E */ 0x00,0x00,0xC6,0xE6,0xF6,0xFE,0xDE,0xCE,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x4F */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x50 */ 0x00,0x00,0xFC,0x66,0x66,0x66,0x7C,0x60,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00,
-/* 0x51 */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xD6,0xDE,0x7C,0x0C,0x0E,0x00,0x00,
-/* 0x52 */ 0x00,0x00,0xFC,0x66,0x66,0x66,0x7C,0x6C,0x66,0x66,0x66,0xE6,0x00,0x00,0x00,0x00,
-/* 0x53 */ 0x00,0x00,0x7C,0xC6,0xC6,0x60,0x38,0x0C,0x06,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x54 */ 0x00,0x00,0x7E,0x7E,0x5A,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x55 */ 0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x56 */ 0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x6C,0x38,0x10,0x00,0x00,0x00,0x00,
-/* 0x57 */ 0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xD6,0xD6,0xD6,0xFE,0xEE,0x6C,0x00,0x00,0x00,0x00,
-/* 0x58 */ 0x00,0x00,0xC6,0xC6,0x6C,0x7C,0x38,0x38,0x7C,0x6C,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x59 */ 0x00,0x00,0x66,0x66,0x66,0x66,0x3C,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x5A */ 0x00,0x00,0xFE,0xC6,0x86,0x0C,0x18,0x30,0x60,0xC2,0xC6,0xFE,0x00,0x00,0x00,0x00,
-/* 0x5B */ 0x00,0x00,0x3C,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x3C,0x00,0x00,0x00,0x00,
-/* 0x5C */ 0x00,0x00,0x00,0x80,0xC0,0xE0,0x70,0x38,0x1C,0x0E,0x06,0x02,0x00,0x00,0x00,0x00,
-/* 0x5D */ 0x00,0x00,0x3C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x0C,0x3C,0x00,0x00,0x00,0x00,
-/* 0x5E */ 0x10,0x38,0x6C,0xC6,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x5F */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,
-/* 0x60 */ 0x30,0x30,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x61 */ 0x00,0x00,0x00,0x00,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x62 */ 0x00,0x00,0xE0,0x60,0x60,0x78,0x6C,0x66,0x66,0x66,0x66,0x7C,0x00,0x00,0x00,0x00,
-/* 0x63 */ 0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0xC0,0xC0,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x64 */ 0x00,0x00,0x1C,0x0C,0x0C,0x3C,0x6C,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x65 */ 0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0xFE,0xC0,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x66 */ 0x00,0x00,0x38,0x6C,0x64,0x60,0xF0,0x60,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00,
-/* 0x67 */ 0x00,0x00,0x00,0x00,0x00,0x3E,0x66,0x66,0x66,0x66,0x66,0x3E,0x06,0x66,0x3C,0x00,
-/* 0x68 */ 0x00,0x00,0xE0,0x60,0x60,0x6C,0x76,0x66,0x66,0x66,0x66,0xE6,0x00,0x00,0x00,0x00,
-/* 0x69 */ 0x00,0x00,0x18,0x18,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x6A */ 0x00,0x00,0x06,0x06,0x00,0x0E,0x06,0x06,0x06,0x06,0x06,0x06,0x66,0x66,0x3C,0x00,
-/* 0x6B */ 0x00,0x00,0xE0,0x60,0x60,0x66,0x6C,0x78,0x78,0x6C,0x66,0xE6,0x00,0x00,0x00,0x00,
-/* 0x6C */ 0x00,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x6D */ 0x00,0x00,0x00,0x00,0x00,0x6C,0xFE,0xD6,0xD6,0xD6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x6E */ 0x00,0x00,0x00,0x00,0x00,0xDC,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x00,0x00,0x00,
-/* 0x6F */ 0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x70 */ 0x00,0x00,0x00,0x00,0x00,0xFC,0x66,0x66,0x66,0x66,0x66,0x7C,0x60,0x60,0xF0,0x00,
-/* 0x71 */ 0x00,0x00,0x00,0x00,0x00,0x7E,0xCC,0xCC,0xCC,0xCC,0xCC,0x7C,0x0C,0x0C,0x1E,0x00,
-/* 0x72 */ 0x00,0x00,0x00,0x00,0x00,0xDC,0x76,0x66,0x60,0x60,0x60,0xF0,0x00,0x00,0x00,0x00,
-/* 0x73 */ 0x00,0x00,0x00,0x00,0x00,0x7C,0xC6,0x60,0x38,0x0C,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x74 */ 0x00,0x00,0x10,0x30,0x30,0xFC,0x30,0x30,0x30,0x30,0x36,0x1C,0x00,0x00,0x00,0x00,
-/* 0x75 */ 0x00,0x00,0x00,0x00,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x76 */ 0x00,0x00,0x00,0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x3C,0x18,0x00,0x00,0x00,0x00,
-/* 0x77 */ 0x00,0x00,0x00,0x00,0x00,0xC6,0xC6,0xD6,0xD6,0xD6,0xFE,0x6C,0x00,0x00,0x00,0x00,
-/* 0x78 */ 0x00,0x00,0x00,0x00,0x00,0xC6,0x6C,0x38,0x38,0x38,0x6C,0xC6,0x00,0x00,0x00,0x00,
-/* 0x79 */ 0x00,0x00,0x00,0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7E,0x06,0x0C,0xF8,0x00,
-/* 0x7A */ 0x00,0x00,0x00,0x00,0x00,0xFE,0xCC,0x18,0x30,0x60,0xC6,0xFE,0x00,0x00,0x00,0x00,
-/* 0x7B */ 0x00,0x00,0x0E,0x18,0x18,0x18,0x70,0x18,0x18,0x18,0x18,0x0E,0x00,0x00,0x00,0x00,
-/* 0x7C */ 0x00,0x00,0x18,0x18,0x18,0x18,0x00,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x7D */ 0x00,0x00,0x70,0x18,0x18,0x18,0x0E,0x18,0x18,0x18,0x18,0x70,0x00,0x00,0x00,0x00,
-/* 0x7E */ 0x00,0x00,0x76,0xDC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0x7F */ 0x00,0x00,0x00,0x00,0x10,0x38,0x6C,0xC6,0xC6,0xC6,0xFE,0x00,0x00,0x00,0x00,0x00,
-/* 0x80 */ 0x00,0x00,0x3C,0x66,0xC2,0xC0,0xC0,0xC0,0xC2,0x66,0x3C,0x0C,0x06,0x7C,0x00,0x00,
-/* 0x81 */ 0x00,0x00,0xCC,0x00,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x82 */ 0x00,0x0C,0x18,0x30,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x83 */ 0x00,0x10,0x38,0x6C,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x84 */ 0x00,0x00,0xCC,0x00,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x85 */ 0x00,0x60,0x30,0x18,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x86 */ 0x00,0x38,0x6C,0x38,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x87 */ 0x00,0x00,0x00,0x00,0x3C,0x66,0x60,0x60,0x66,0x3C,0x0C,0x06,0x3C,0x00,0x00,0x00,
-/* 0x88 */ 0x00,0x10,0x38,0x6C,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x89 */ 0x00,0x00,0xC6,0x00,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x8A */ 0x00,0x60,0x30,0x18,0x00,0x7C,0xC6,0xC6,0xFE,0xC0,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x8B */ 0x00,0x00,0x66,0x00,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x8C */ 0x00,0x18,0x3C,0x66,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x8D */ 0x00,0x60,0x30,0x18,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0x8E */ 0x00,0xC6,0x00,0x10,0x38,0x6C,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x8F */ 0x38,0x6C,0x38,0x00,0x38,0x6C,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0x90 */ 0x18,0x30,0x60,0x00,0xFE,0x66,0x60,0x7C,0x60,0x60,0x66,0xFE,0x00,0x00,0x00,0x00,
-/* 0x91 */ 0x00,0x00,0x00,0x00,0x00,0xCC,0x76,0x36,0x7E,0xD8,0xD8,0x6E,0x00,0x00,0x00,0x00,
-/* 0x92 */ 0x00,0x00,0x3E,0x6C,0xCC,0xCC,0xFE,0xCC,0xCC,0xCC,0xCC,0xCE,0x00,0x00,0x00,0x00,
-/* 0x93 */ 0x00,0x10,0x38,0x6C,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x94 */ 0x00,0x00,0xC6,0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x95 */ 0x00,0x60,0x30,0x18,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x96 */ 0x00,0x30,0x78,0xCC,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x97 */ 0x00,0x60,0x30,0x18,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0x98 */ 0x00,0x00,0xC6,0x00,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7E,0x06,0x0C,0x78,0x00,
-/* 0x99 */ 0x00,0xC6,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x9A */ 0x00,0xC6,0x00,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0x9B */ 0x00,0x18,0x18,0x3C,0x66,0x60,0x60,0x60,0x66,0x3C,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x9C */ 0x00,0x38,0x6C,0x64,0x60,0xF8,0x60,0x60,0x60,0x60,0xE6,0xFC,0x00,0x00,0x00,0x00,
-/* 0x9D */ 0x00,0x00,0x66,0x66,0x3C,0x18,0x7E,0x18,0x7E,0x18,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0x9E */ 0x00,0xF8,0xCC,0xCC,0xF8,0xC4,0xCC,0xDE,0xCC,0xCC,0xCC,0xC6,0x00,0x00,0x00,0x00,
-/* 0x9F */ 0x00,0x0E,0x1B,0x18,0x18,0x18,0x7E,0x18,0x18,0x18,0x18,0x18,0xD8,0x70,0x00,0x00,
-/* 0xA0 */ 0x00,0x18,0x30,0x60,0x00,0x78,0x0C,0x7C,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0xA1 */ 0x00,0x0C,0x18,0x30,0x00,0x38,0x18,0x18,0x18,0x18,0x18,0x3C,0x00,0x00,0x00,0x00,
-/* 0xA2 */ 0x00,0x18,0x30,0x60,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0xA3 */ 0x00,0x18,0x30,0x60,0x00,0xCC,0xCC,0xCC,0xCC,0xCC,0xCC,0x76,0x00,0x00,0x00,0x00,
-/* 0xA4 */ 0x00,0x00,0x76,0xDC,0x00,0xDC,0x66,0x66,0x66,0x66,0x66,0x66,0x00,0x00,0x00,0x00,
-/* 0xA5 */ 0x76,0xDC,0x00,0xC6,0xE6,0xF6,0xFE,0xDE,0xCE,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0xA6 */ 0x00,0x3C,0x6C,0x6C,0x3E,0x00,0x7E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xA7 */ 0x00,0x38,0x6C,0x6C,0x38,0x00,0x7C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xA8 */ 0x00,0x00,0x30,0x30,0x00,0x30,0x30,0x60,0xC0,0xC6,0xC6,0x7C,0x00,0x00,0x00,0x00,
-/* 0xA9 */ 0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xC0,0xC0,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,
-/* 0xAA */ 0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x06,0x06,0x06,0x06,0x00,0x00,0x00,0x00,0x00,
-/* 0xAB */ 0x00,0xC0,0xC0,0xC2,0xC6,0xCC,0x18,0x30,0x60,0xDC,0x86,0x0C,0x18,0x3E,0x00,0x00,
-/* 0xAC */ 0x00,0xC0,0xC0,0xC2,0xC6,0xCC,0x18,0x30,0x66,0xCE,0x9E,0x3E,0x06,0x06,0x00,0x00,
-/* 0xAD */ 0x00,0x00,0x18,0x18,0x00,0x18,0x18,0x18,0x3C,0x3C,0x3C,0x18,0x00,0x00,0x00,0x00,
-/* 0xAE */ 0x00,0x00,0x00,0x00,0x00,0x36,0x6C,0xD8,0x6C,0x36,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xAF */ 0x00,0x00,0x00,0x00,0x00,0xD8,0x6C,0x36,0x6C,0xD8,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xB0 */ 0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,0x11,0x44,
-/* 0xB1 */ 0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,0x55,0xAA,
-/* 0xB2 */ 0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,0xDD,0x77,
-/* 0xB3 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xB4 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xB5 */ 0x18,0x18,0x18,0x18,0x18,0xF8,0x18,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xB6 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xF6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xB7 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xB8 */ 0x00,0x00,0x00,0x00,0x00,0xF8,0x18,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xB9 */ 0x36,0x36,0x36,0x36,0x36,0xF6,0x06,0xF6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xBA */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xBB */ 0x00,0x00,0x00,0x00,0x00,0xFE,0x06,0xF6,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xBC */ 0x36,0x36,0x36,0x36,0x36,0xF6,0x06,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xBD */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xBE */ 0x18,0x18,0x18,0x18,0x18,0xF8,0x18,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xBF */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xC0 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xC1 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xC2 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xC3 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xC4 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xC5 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xC6 */ 0x18,0x18,0x18,0x18,0x18,0x1F,0x18,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xC7 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xC8 */ 0x36,0x36,0x36,0x36,0x36,0x37,0x30,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xC9 */ 0x00,0x00,0x00,0x00,0x00,0x3F,0x30,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xCA */ 0x36,0x36,0x36,0x36,0x36,0xF7,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xCB */ 0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0xF7,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xCC */ 0x36,0x36,0x36,0x36,0x36,0x37,0x30,0x37,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xCD */ 0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xCE */ 0x36,0x36,0x36,0x36,0x36,0xF7,0x00,0xF7,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xCF */ 0x18,0x18,0x18,0x18,0x18,0xFF,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xD0 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xD1 */ 0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xD2 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xD3 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xD4 */ 0x18,0x18,0x18,0x18,0x18,0x1F,0x18,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xD5 */ 0x00,0x00,0x00,0x00,0x00,0x1F,0x18,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xD6 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xD7 */ 0x36,0x36,0x36,0x36,0x36,0x36,0x36,0xFF,0x36,0x36,0x36,0x36,0x36,0x36,0x36,0x36,
-/* 0xD8 */ 0x18,0x18,0x18,0x18,0x18,0xFF,0x18,0xFF,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xD9 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xDA */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xDB */ 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-/* 0xDC */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-/* 0xDD */ 0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,
-/* 0xDE */ 0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,0x0F,
-/* 0xDF */ 0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xE0 */ 0x00,0x00,0x00,0x00,0x00,0x76,0xDC,0xD8,0xD8,0xD8,0xDC,0x76,0x00,0x00,0x00,0x00,
-/* 0xE1 */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xFC,0xC6,0xC6,0xC6,0xC6,0xDC,0xC0,0xC0,0x00,0x00,
-/* 0xE2 */ 0x00,0x00,0xFE,0xC6,0xC6,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0,0x00,0x00,0x00,0x00,
-/* 0xE3 */ 0x00,0x00,0x00,0x00,0x00,0xFE,0x6C,0x6C,0x6C,0x6C,0x6C,0x6C,0x00,0x00,0x00,0x00,
-/* 0xE4 */ 0x00,0x00,0xFE,0xC6,0x60,0x30,0x18,0x18,0x30,0x60,0xC6,0xFE,0x00,0x00,0x00,0x00,
-/* 0xE5 */ 0x00,0x00,0x00,0x00,0x00,0x7E,0xD8,0xD8,0xD8,0xD8,0xD8,0x70,0x00,0x00,0x00,0x00,
-/* 0xE6 */ 0x00,0x00,0x00,0x00,0x00,0x66,0x66,0x66,0x66,0x66,0x7C,0x60,0xC0,0x00,0x00,0x00,
-/* 0xE7 */ 0x00,0x00,0x00,0x00,0x00,0x76,0xDC,0x18,0x18,0x18,0x18,0x18,0x00,0x00,0x00,0x00,
-/* 0xE8 */ 0x00,0x00,0x7E,0x18,0x3C,0x66,0x66,0x66,0x66,0x3C,0x18,0x7E,0x00,0x00,0x00,0x00,
-/* 0xE9 */ 0x00,0x00,0x38,0x6C,0xC6,0xC6,0xFE,0xC6,0xC6,0xC6,0x6C,0x38,0x00,0x00,0x00,0x00,
-/* 0xEA */ 0x00,0x00,0x38,0x6C,0xC6,0xC6,0xC6,0x6C,0x6C,0x6C,0x6C,0xEE,0x00,0x00,0x00,0x00,
-/* 0xEB */ 0x00,0x00,0x1E,0x30,0x18,0x0C,0x3E,0x66,0x66,0x66,0x66,0x3C,0x00,0x00,0x00,0x00,
-/* 0xEC */ 0x00,0x00,0x00,0x00,0x00,0x7E,0xDB,0xDB,0xDB,0x7E,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xED */ 0x00,0x00,0x00,0x03,0x06,0x7E,0xDB,0xDB,0xF3,0x7E,0x60,0xC0,0x00,0x00,0x00,0x00,
-/* 0xEE */ 0x00,0x00,0x1C,0x30,0x60,0x60,0x7C,0x60,0x60,0x60,0x30,0x1C,0x00,0x00,0x00,0x00,
-/* 0xEF */ 0x00,0x00,0x7C,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0xC6,0x00,0x00,0x00,0x00,
-/* 0xF0 */ 0x00,0x00,0x00,0x00,0xFE,0x00,0x00,0xFE,0x00,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,
-/* 0xF1 */ 0x00,0x00,0x00,0x00,0x18,0x18,0x7E,0x18,0x18,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,
-/* 0xF2 */ 0x00,0x00,0x00,0x30,0x18,0x0C,0x06,0x0C,0x18,0x30,0x00,0x7E,0x00,0x00,0x00,0x00,
-/* 0xF3 */ 0x00,0x00,0x00,0x0C,0x18,0x30,0x60,0x30,0x18,0x0C,0x00,0x7E,0x00,0x00,0x00,0x00,
-/* 0xF4 */ 0x00,0x0E,0x1B,0x1B,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,
-/* 0xF5 */ 0x18,0x18,0x18,0x18,0x18,0x18,0x18,0x18,0xD8,0xD8,0xD8,0x70,0x00,0x00,0x00,0x00,
-/* 0xF6 */ 0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x7E,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00,
-/* 0xF7 */ 0x00,0x00,0x00,0x00,0x00,0x76,0xDC,0x00,0x76,0xDC,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xF8 */ 0x00,0x38,0x6C,0x6C,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xF9 */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xFA */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xFB */ 0x00,0x0F,0x0C,0x0C,0x0C,0x0C,0x0C,0xEC,0x6C,0x6C,0x3C,0x1C,0x00,0x00,0x00,0x00,
-/* 0xFC */ 0x00,0xD8,0x6C,0x6C,0x6C,0x6C,0x6C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xFD */ 0x00,0x70,0xD8,0x30,0x60,0xC8,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-/* 0xFE */ 0x00,0x00,0x00,0x00,0x7C,0x7C,0x7C,0x7C,0x7C,0x7C,0x7C,0x00,0x00,0x00,0x00,0x00,
-};
diff --git a/arch/ppc/boot/include/mpc10x.h b/arch/ppc/boot/include/mpc10x.h
deleted file mode 100644
index 6e5d540d8d3e..000000000000
--- a/arch/ppc/boot/include/mpc10x.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Common defines for the Motorola SPS MPC106/8240/107 Host bridge/Mem
- * ctrl/EPIC/etc.
- *
- * Author: Tom Rini <trini@mvista.com>
- *
- * This is a heavily stripped down version of:
- * include/asm-ppc/mpc10x.h
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __BOOT_MPC10X_H__
-#define __BOOT_MPC10X_H__
-
-/*
- * The values here don't completely map everything but should work in most
- * cases.
- *
- * MAP A (PReP Map)
- *   Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff
- *   Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff
- *   PCI MEM:   0x80000000 -> Processor System Memory: 0x00000000
- *   EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
- *
- * MAP B (CHRP Map)
- *   Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff
- *   Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff
- *   PCI MEM:   0x00000000 -> Processor System Memory: 0x00000000
- *   EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB)
- */
-
-/* Define the type of map to use */
-#define	MPC10X_MEM_MAP_A		1
-#define	MPC10X_MEM_MAP_B		2
-
-/* Map A (PReP Map) Defines */
-#define	MPC10X_MAPA_CNFG_ADDR		0x80000cf8
-#define	MPC10X_MAPA_CNFG_DATA		0x80000cfc
-
-/* Map B (CHRP Map) Defines */
-#define	MPC10X_MAPB_CNFG_ADDR		0xfec00000
-#define	MPC10X_MAPB_CNFG_DATA		0xfee00000
-
-/* Define offsets for the memory controller registers in the config space */
-#define MPC10X_MCTLR_MEM_START_1	0x80	/* Banks 0-3 */
-#define MPC10X_MCTLR_MEM_START_2	0x84	/* Banks 4-7 */
-#define MPC10X_MCTLR_EXT_MEM_START_1	0x88	/* Banks 0-3 */
-#define MPC10X_MCTLR_EXT_MEM_START_2	0x8c	/* Banks 4-7 */
-
-#define MPC10X_MCTLR_MEM_END_1		0x90	/* Banks 0-3 */
-#define MPC10X_MCTLR_MEM_END_2		0x94	/* Banks 4-7 */
-#define MPC10X_MCTLR_EXT_MEM_END_1	0x98	/* Banks 0-3 */
-#define MPC10X_MCTLR_EXT_MEM_END_2	0x9c	/* Banks 4-7 */
-
-#define MPC10X_MCTLR_MEM_BANK_ENABLES	0xa0
-
-#endif	/* __BOOT_MPC10X_H__ */
diff --git a/arch/ppc/boot/include/mpsc_defs.h b/arch/ppc/boot/include/mpsc_defs.h
deleted file mode 100644
index 9f37e1355b17..000000000000
--- a/arch/ppc/boot/include/mpsc_defs.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * arch/ppc/boot/include/mpsc_defs.h
- *
- * Register definitions for the Marvell Multi-Protocol Serial Controller (MPSC),
- * Serial DMA Controller (SDMA), and Baud Rate Generator (BRG).
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef	_PPC_BOOT_MPSC_DEFS_H__
-#define	_PPC_BOOT_MPSC_DEFS_H__
-
-#define	MPSC_NUM_CTLRS		2
-
-/*
- *****************************************************************************
- *
- *	Multi-Protocol Serial Controller Interface Registers
- *
- *****************************************************************************
- */
-
-/* Main Configuratino Register Offsets */
-#define	MPSC_MMCRL			0x0000
-#define	MPSC_MMCRH			0x0004
-#define	MPSC_MPCR			0x0008
-#define	MPSC_CHR_1			0x000c
-#define	MPSC_CHR_2			0x0010
-#define	MPSC_CHR_3			0x0014
-#define	MPSC_CHR_4			0x0018
-#define	MPSC_CHR_5			0x001c
-#define	MPSC_CHR_6			0x0020
-#define	MPSC_CHR_7			0x0024
-#define	MPSC_CHR_8			0x0028
-#define	MPSC_CHR_9			0x002c
-#define	MPSC_CHR_10			0x0030
-#define	MPSC_CHR_11			0x0034
-
-#define	MPSC_MPCR_CL_5			0
-#define	MPSC_MPCR_CL_6			1
-#define	MPSC_MPCR_CL_7			2
-#define	MPSC_MPCR_CL_8			3
-#define	MPSC_MPCR_SBL_1			0
-#define	MPSC_MPCR_SBL_2			3
-
-#define	MPSC_CHR_2_TEV			(1<<1)
-#define	MPSC_CHR_2_TA			(1<<7)
-#define	MPSC_CHR_2_TTCS			(1<<9)
-#define	MPSC_CHR_2_REV			(1<<17)
-#define	MPSC_CHR_2_RA			(1<<23)
-#define	MPSC_CHR_2_CRD			(1<<25)
-#define	MPSC_CHR_2_EH			(1<<31)
-#define	MPSC_CHR_2_PAR_ODD		0
-#define	MPSC_CHR_2_PAR_SPACE		1
-#define	MPSC_CHR_2_PAR_EVEN		2
-#define	MPSC_CHR_2_PAR_MARK		3
-
-/* MPSC Signal Routing */
-#define	MPSC_MRR			0x0000
-#define	MPSC_RCRR			0x0004
-#define	MPSC_TCRR			0x0008
-
-/*
- *****************************************************************************
- *
- *	Serial DMA Controller Interface Registers
- *
- *****************************************************************************
- */
-
-#define	SDMA_SDC			0x0000
-#define	SDMA_SDCM			0x0008
-#define	SDMA_RX_DESC			0x0800
-#define	SDMA_RX_BUF_PTR			0x0808
-#define	SDMA_SCRDP			0x0810
-#define	SDMA_TX_DESC			0x0c00
-#define	SDMA_SCTDP			0x0c10
-#define	SDMA_SFTDP			0x0c14
-
-#define	SDMA_DESC_CMDSTAT_PE		(1<<0)
-#define	SDMA_DESC_CMDSTAT_CDL		(1<<1)
-#define	SDMA_DESC_CMDSTAT_FR		(1<<3)
-#define	SDMA_DESC_CMDSTAT_OR		(1<<6)
-#define	SDMA_DESC_CMDSTAT_BR		(1<<9)
-#define	SDMA_DESC_CMDSTAT_MI		(1<<10)
-#define	SDMA_DESC_CMDSTAT_A		(1<<11)
-#define	SDMA_DESC_CMDSTAT_AM		(1<<12)
-#define	SDMA_DESC_CMDSTAT_CT		(1<<13)
-#define	SDMA_DESC_CMDSTAT_C		(1<<14)
-#define	SDMA_DESC_CMDSTAT_ES		(1<<15)
-#define	SDMA_DESC_CMDSTAT_L		(1<<16)
-#define	SDMA_DESC_CMDSTAT_F		(1<<17)
-#define	SDMA_DESC_CMDSTAT_P		(1<<18)
-#define	SDMA_DESC_CMDSTAT_EI		(1<<23)
-#define	SDMA_DESC_CMDSTAT_O		(1<<31)
-
-#define SDMA_DESC_DFLT			(SDMA_DESC_CMDSTAT_O |	\
-					SDMA_DESC_CMDSTAT_EI)
-
-#define	SDMA_SDC_RFT			(1<<0)
-#define	SDMA_SDC_SFM			(1<<1)
-#define	SDMA_SDC_BLMR			(1<<6)
-#define	SDMA_SDC_BLMT			(1<<7)
-#define	SDMA_SDC_POVR			(1<<8)
-#define	SDMA_SDC_RIFB			(1<<9)
-
-#define	SDMA_SDCM_ERD			(1<<7)
-#define	SDMA_SDCM_AR			(1<<15)
-#define	SDMA_SDCM_STD			(1<<16)
-#define	SDMA_SDCM_TXD			(1<<23)
-#define	SDMA_SDCM_AT			(1<<31)
-
-#define	SDMA_0_CAUSE_RXBUF		(1<<0)
-#define	SDMA_0_CAUSE_RXERR		(1<<1)
-#define	SDMA_0_CAUSE_TXBUF		(1<<2)
-#define	SDMA_0_CAUSE_TXEND		(1<<3)
-#define	SDMA_1_CAUSE_RXBUF		(1<<8)
-#define	SDMA_1_CAUSE_RXERR		(1<<9)
-#define	SDMA_1_CAUSE_TXBUF		(1<<10)
-#define	SDMA_1_CAUSE_TXEND		(1<<11)
-
-#define	SDMA_CAUSE_RX_MASK	(SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR | \
-	SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR)
-#define	SDMA_CAUSE_TX_MASK	(SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND | \
-	SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND)
-
-/* SDMA Interrupt registers */
-#define	SDMA_INTR_CAUSE			0x0000
-#define	SDMA_INTR_MASK			0x0080
-
-/*
- *****************************************************************************
- *
- *	Baud Rate Generator Interface Registers
- *
- *****************************************************************************
- */
-
-#define	BRG_BCR				0x0000
-#define	BRG_BTR				0x0004
-
-#endif /*_PPC_BOOT_MPSC_DEFS_H__ */
diff --git a/arch/ppc/boot/include/nonstdio.h b/arch/ppc/boot/include/nonstdio.h
deleted file mode 100644
index f2b5526faef3..000000000000
--- a/arch/ppc/boot/include/nonstdio.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * This is sort of a catchall for I/O related functions.  Stuff that
- * wouldn't be in 'stdio.h' normally is here, and it's 'nonstdio.h'
- * for a reason.  -- Tom
- */
-typedef int FILE;
-extern FILE *stdin, *stdout;
-#define NULL ((void *)0)
-#define EOF (-1)
-#define fopen(n, m) NULL
-#define fflush(f) 0
-#define fclose(f) 0
-#define perror(s) printf("%s: no files!\n", (s))
-
-extern int getc(void);
-extern int printf(const char *format, ...);
-extern int sprintf(char *str, const char *format, ...);
-extern int tstc(void);
-extern void exit(void);
-extern void outb(int port, unsigned char val);
-extern void putc(const char c);
-extern void puthex(unsigned long val);
-extern void puts(const char *);
-extern void udelay(long delay);
-extern unsigned char inb(int port);
-extern void board_isa_init(void);
-extern void ISA_init(unsigned long base);
diff --git a/arch/ppc/boot/include/of1275.h b/arch/ppc/boot/include/of1275.h
deleted file mode 100644
index 4ed88acfa73a..000000000000
--- a/arch/ppc/boot/include/of1275.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-typedef void *prom_handle;
-typedef void *ihandle;
-typedef void *phandle;
-typedef int (*prom_entry)(void *);
-
-#define OF_INVALID_HANDLE	((prom_handle)-1UL)
-
-extern prom_entry of_prom_entry;
-
-/* function declarations */
-
-int	call_prom(const char *service, int nargs, int nret, ...);
-int	call_prom_ret(const char *service, int nargs, int nret,
-		      unsigned int *rets, ...);
-void *	claim(unsigned int virt, unsigned int size, unsigned int align);
-int	map(unsigned int phys, unsigned int virt, unsigned int size);
-void	enter(void);
-void	exit(void);
-phandle	finddevice(const char *name);
-int	getprop(phandle node, const char *name, void *buf, int buflen);
-void	ofinit(prom_entry entry);
-int	ofstdio(ihandle *stdin, ihandle *stdout, ihandle *stderr);
-int	read(ihandle instance, void *buf, int buflen);
-void	release(void *virt, unsigned int size);
-int	write(ihandle instance, void *buf, int buflen);
-
-/* inlines */
-
-extern inline void pause(void)
-{
-	enter();
-}
diff --git a/arch/ppc/boot/include/rs6000.h b/arch/ppc/boot/include/rs6000.h
deleted file mode 100644
index 433f45084e41..000000000000
--- a/arch/ppc/boot/include/rs6000.h
+++ /dev/null
@@ -1,243 +0,0 @@
-/* IBM RS/6000 "XCOFF" file definitions for BFD.
-   Copyright (C) 1990, 1991 Free Software Foundation, Inc.
-   FIXME: Can someone provide a transliteration of this name into ASCII?
-   Using the following chars caused a compiler warning on HIUX (so I replaced
-   them with octal escapes), and isn't useful without an understanding of what
-   character set it is.
-   Written by Mimi Ph\373\364ng-Th\345o V\365 of IBM
-   and John Gilmore of Cygnus Support.  */
-
-/********************** FILE HEADER **********************/
-
-struct external_filehdr {
-	char f_magic[2];	/* magic number			*/
-	char f_nscns[2];	/* number of sections		*/
-	char f_timdat[4];	/* time & date stamp		*/
-	char f_symptr[4];	/* file pointer to symtab	*/
-	char f_nsyms[4];	/* number of symtab entries	*/
-	char f_opthdr[2];	/* sizeof(optional hdr)		*/
-	char f_flags[2];	/* flags			*/
-};
-
-        /* IBM RS/6000 */
-#define U802WRMAGIC     0730    /* writeable text segments **chh**      */
-#define U802ROMAGIC     0735    /* readonly sharable text segments      */
-#define U802TOCMAGIC    0737    /* readonly text segments and TOC       */
-
-#define BADMAG(x)	\
-	((x).f_magic != U802ROMAGIC && (x).f_magic != U802WRMAGIC && \
-	 (x).f_magic != U802TOCMAGIC)
-
-#define	FILHDR	struct external_filehdr
-#define	FILHSZ	20
-
-
-/********************** AOUT "OPTIONAL HEADER" **********************/
-
-
-typedef struct
-{
-  unsigned char	magic[2];	/* type of file			*/
-  unsigned char	vstamp[2];	/* version stamp		*/
-  unsigned char	tsize[4];	/* text size in bytes, padded to FW bdry */
-  unsigned char	dsize[4];	/* initialized data "  "	*/
-  unsigned char	bsize[4];	/* uninitialized data "   "	*/
-  unsigned char	entry[4];	/* entry pt.			*/
-  unsigned char	text_start[4];	/* base of text used for this file */
-  unsigned char	data_start[4];	/* base of data used for this file */
-  unsigned char	o_toc[4];	/* address of TOC */
-  unsigned char	o_snentry[2];	/* section number of entry point */
-  unsigned char	o_sntext[2];	/* section number of .text section */
-  unsigned char	o_sndata[2];	/* section number of .data section */
-  unsigned char	o_sntoc[2];	/* section number of TOC */
-  unsigned char	o_snloader[2];	/* section number of .loader section */
-  unsigned char	o_snbss[2];	/* section number of .bss section */
-  unsigned char	o_algntext[2];	/* .text alignment */
-  unsigned char	o_algndata[2];	/* .data alignment */
-  unsigned char	o_modtype[2];	/* module type (??) */
-  unsigned char o_cputype[2];	/* cpu type */
-  unsigned char	o_maxstack[4];	/* max stack size (??) */
-  unsigned char o_maxdata[4];	/* max data size (??) */
-  unsigned char	o_resv2[12];	/* reserved */
-}
-AOUTHDR;
-
-#define AOUTSZ 72
-#define SMALL_AOUTSZ (28)
-#define AOUTHDRSZ 72
-
-#define	RS6K_AOUTHDR_OMAGIC	0x0107	/* old: text & data writeable */
-#define	RS6K_AOUTHDR_NMAGIC	0x0108	/* new: text r/o, data r/w */
-#define	RS6K_AOUTHDR_ZMAGIC	0x010B	/* paged: text r/o, both page-aligned */
-
-
-/********************** SECTION HEADER **********************/
-
-
-struct external_scnhdr {
-	char		s_name[8];	/* section name			*/
-	char		s_paddr[4];	/* physical address, aliased s_nlib */
-	char		s_vaddr[4];	/* virtual address		*/
-	char		s_size[4];	/* section size			*/
-	char		s_scnptr[4];	/* file ptr to raw data for section */
-	char		s_relptr[4];	/* file ptr to relocation	*/
-	char		s_lnnoptr[4];	/* file ptr to line numbers	*/
-	char		s_nreloc[2];	/* number of relocation entries	*/
-	char		s_nlnno[2];	/* number of line number entries*/
-	char		s_flags[4];	/* flags			*/
-};
-
-/*
- * names of "special" sections
- */
-#define _TEXT	".text"
-#define _DATA	".data"
-#define _BSS	".bss"
-#define _PAD	".pad"
-#define _LOADER	".loader"
-
-#define	SCNHDR	struct external_scnhdr
-#define	SCNHSZ	40
-
-/* XCOFF uses a special .loader section with type STYP_LOADER.  */
-#define STYP_LOADER 0x1000
-
-/* XCOFF uses a special .debug section with type STYP_DEBUG.  */
-#define STYP_DEBUG 0x2000
-
-/* XCOFF handles line number or relocation overflow by creating
-   another section header with STYP_OVRFLO set.  */
-#define STYP_OVRFLO 0x8000
-
-/********************** LINE NUMBERS **********************/
-
-/* 1 line number entry for every "breakpointable" source line in a section.
- * Line numbers are grouped on a per function basis; first entry in a function
- * grouping will have l_lnno = 0 and in place of physical address will be the
- * symbol table index of the function name.
- */
-struct external_lineno {
-	union {
-		char l_symndx[4];	/* function name symbol index, iff l_lnno == 0*/
-		char l_paddr[4];	/* (physical) address of line number	*/
-	} l_addr;
-	char l_lnno[2];	/* line number		*/
-};
-
-
-#define	LINENO	struct external_lineno
-#define	LINESZ	6
-
-
-/********************** SYMBOLS **********************/
-
-#define E_SYMNMLEN	8	/* # characters in a symbol name	*/
-#define E_FILNMLEN	14	/* # characters in a file name		*/
-#define E_DIMNUM	4	/* # array dimensions in auxiliary entry */
-
-struct external_syment
-{
-  union {
-    char e_name[E_SYMNMLEN];
-    struct {
-      char e_zeroes[4];
-      char e_offset[4];
-    } e;
-  } e;
-  char e_value[4];
-  char e_scnum[2];
-  char e_type[2];
-  char e_sclass[1];
-  char e_numaux[1];
-};
-
-
-
-#define N_BTMASK	(017)
-#define N_TMASK		(060)
-#define N_BTSHFT	(4)
-#define N_TSHIFT	(2)
-
-
-union external_auxent {
-	struct {
-		char x_tagndx[4];	/* str, un, or enum tag indx */
-		union {
-			struct {
-			    char  x_lnno[2]; /* declaration line number */
-			    char  x_size[2]; /* str/union/array size */
-			} x_lnsz;
-			char x_fsize[4];	/* size of function */
-		} x_misc;
-		union {
-			struct {		/* if ISFCN, tag, or .bb */
-			    char x_lnnoptr[4];	/* ptr to fcn line # */
-			    char x_endndx[4];	/* entry ndx past block end */
-			} x_fcn;
-			struct {		/* if ISARY, up to 4 dimen. */
-			    char x_dimen[E_DIMNUM][2];
-			} x_ary;
-		} x_fcnary;
-		char x_tvndx[2];		/* tv index */
-	} x_sym;
-
-	union {
-		char x_fname[E_FILNMLEN];
-		struct {
-			char x_zeroes[4];
-			char x_offset[4];
-		} x_n;
-	} x_file;
-
-	struct {
-		char x_scnlen[4];			/* section length */
-		char x_nreloc[2];	/* # relocation entries */
-		char x_nlinno[2];	/* # line numbers */
-	} x_scn;
-
-        struct {
-		char x_tvfill[4];	/* tv fill value */
-		char x_tvlen[2];	/* length of .tv */
-		char x_tvran[2][2];	/* tv range */
-	} x_tv;		/* info about .tv section (in auxent of symbol .tv)) */
-
-	struct {
-		unsigned char x_scnlen[4];
-		unsigned char x_parmhash[4];
-		unsigned char x_snhash[2];
-		unsigned char x_smtyp[1];
-		unsigned char x_smclas[1];
-		unsigned char x_stab[4];
-		unsigned char x_snstab[2];
-	} x_csect;
-
-};
-
-#define	SYMENT	struct external_syment
-#define	SYMESZ	18
-#define	AUXENT	union external_auxent
-#define	AUXESZ	18
-#define DBXMASK 0x80		/* for dbx storage mask */
-#define SYMNAME_IN_DEBUG(symptr) ((symptr)->n_sclass & DBXMASK)
-
-
-
-/********************** RELOCATION DIRECTIVES **********************/
-
-
-struct external_reloc {
-  char r_vaddr[4];
-  char r_symndx[4];
-  char r_size[1];
-  char r_type[1];
-};
-
-
-#define RELOC struct external_reloc
-#define RELSZ 10
-
-#define DEFAULT_DATA_SECTION_ALIGNMENT 4
-#define DEFAULT_BSS_SECTION_ALIGNMENT 4
-#define DEFAULT_TEXT_SECTION_ALIGNMENT 4
-/* For new sections we havn't heard of before */
-#define DEFAULT_SECTION_ALIGNMENT 4
diff --git a/arch/ppc/boot/include/serial.h b/arch/ppc/boot/include/serial.h
deleted file mode 100644
index d710eabb4256..000000000000
--- a/arch/ppc/boot/include/serial.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * A really private header file for the (dumb) serial driver in arch/ppc/boot
- *
- * Shamelessly taken from include/linux/serialP.h:
- *
- * Copyright (C) 1997 by Theodore Ts'o.
- *
- * Redistribution of this file is permitted under the terms of the GNU
- * Public License (GPL)
- */
-
-#ifndef _PPC_BOOT_SERIALP_H
-#define _PPC_BOOT_SERIALP_H
-
-/*
- * This is our internal structure for each serial port's state.
- *
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * Given that this is how SERIAL_PORT_DFNS are done, and that we need
- * to use a few of their fields, we need to have our own copy of it.
- */
-struct serial_state {
-	int	magic;
-	int	baud_base;
-	unsigned long	port;
-	int	irq;
-	int	flags;
-	int	hub6;
-	int	type;
-	int	line;
-	int	revision;	/* Chip revision (950) */
-	int	xmit_fifo_size;
-	int	custom_divisor;
-	int	count;
-	u8	*iomem_base;
-	u16	iomem_reg_shift;
-	unsigned short	close_delay;
-	unsigned short	closing_wait; /* time to wait before closing */
-	unsigned long	icount;
-	int	io_type;
-	void    *info;
-	void    *dev;
-};
-#endif /* _PPC_BOOT_SERIAL_H */
diff --git a/arch/ppc/boot/ld.script b/arch/ppc/boot/ld.script
deleted file mode 100644
index d4dd8f15395e..000000000000
--- a/arch/ppc/boot/ld.script
+++ /dev/null
@@ -1,85 +0,0 @@
-OUTPUT_ARCH(powerpc:common)
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    *(.text)
-    *(.fixup)
-    __relocate_start = .;
-    *(.relocate_code)
-    __relocate_end = .;
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-
-  /* Read-write section, merged into data segment: */
-  . = ALIGN(4096);
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.data.boot)
-    *(.sdata)
-    *(.sdata2)
-    *(.got.plt) *(.got)
-    *(.dynamic)
-    *(.rodata)
-    *(.rodata.*)
-    *(.rodata1)
-    *(.got1)
-    __image_begin = .;
-    *(.image)
-    __image_end = .;
-    . = ALIGN(4096);
-    __ramdisk_begin = .;
-    *(.ramdisk)
-    __ramdisk_end = .;
-    . = ALIGN(4096);
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = ALIGN(4096);
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-
-  /DISCARD/ : {
-    *(__ksymtab)
-    *(__ksymtab_strings)
-    *(__bug_table)
-    *(__kcrctab)
-  }
-
-}
diff --git a/arch/ppc/boot/lib/.gitignore b/arch/ppc/boot/lib/.gitignore
deleted file mode 100644
index 1629a6167755..000000000000
--- a/arch/ppc/boot/lib/.gitignore
+++ /dev/null
@@ -1,3 +0,0 @@
-inffast.c
-inflate.c
-inftrees.c
diff --git a/arch/ppc/boot/lib/Makefile b/arch/ppc/boot/lib/Makefile
deleted file mode 100644
index 2f995f712ec5..000000000000
--- a/arch/ppc/boot/lib/Makefile
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# Makefile for some libs needed by zImage.
-#
-
-CFLAGS_kbd.o	:= -Idrivers/char
-CFLAGS_vreset.o := -Iarch/ppc/boot/include
-
-zlib  := inffast.c inflate.c inftrees.c
-	 
-lib-y += $(zlib:.c=.o) div64.o
-lib-$(CONFIG_VGA_CONSOLE) += vreset.o kbd.o
-
-
-# zlib files needs header from their original place
-EXTRA_CFLAGS += -Ilib/zlib_inflate
-
-quiet_cmd_copy_zlib = COPY    $@
-      cmd_copy_zlib = cat $< > $@
-
-$(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
-	$(call cmd,copy_zlib)
-
-clean-files := $(zlib)
diff --git a/arch/ppc/boot/lib/div64.S b/arch/ppc/boot/lib/div64.S
deleted file mode 100644
index 3527569e9926..000000000000
--- a/arch/ppc/boot/lib/div64.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Divide a 64-bit unsigned number by a 32-bit unsigned number.
- * This routine assumes that the top 32 bits of the dividend are
- * non-zero to start with.
- * On entry, r3 points to the dividend, which get overwritten with
- * the 64-bit quotient, and r4 contains the divisor.
- * On exit, r3 contains the remainder.
- *
- * Copyright (C) 2002 Paul Mackerras, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <asm/ppc_asm.h>
-#include <asm/processor.h>
-
-_GLOBAL(__div64_32)
-	lwz	r5,0(r3)	# get the dividend into r5/r6
-	lwz	r6,4(r3)
-	cmplw	r5,r4
-	li	r7,0
-	li	r8,0
-	blt	1f
-	divwu	r7,r5,r4	# if dividend.hi >= divisor,
-	mullw	r0,r7,r4	# quotient.hi = dividend.hi / divisor
-	subf.	r5,r0,r5	# dividend.hi %= divisor
-	beq	3f
-1:	mr	r11,r5		# here dividend.hi != 0
-	andis.	r0,r5,0xc000
-	bne	2f
-	cntlzw	r0,r5		# we are shifting the dividend right
-	li	r10,-1		# to make it < 2^32, and shifting
-	srw	r10,r10,r0	# the divisor right the same amount,
-	add	r9,r4,r10	# rounding up (so the estimate cannot
-	andc	r11,r6,r10	# ever be too large, only too small)
-	andc	r9,r9,r10
-	or	r11,r5,r11
-	rotlw	r9,r9,r0
-	rotlw	r11,r11,r0
-	divwu	r11,r11,r9	# then we divide the shifted quantities
-2:	mullw	r10,r11,r4	# to get an estimate of the quotient,
-	mulhwu	r9,r11,r4	# multiply the estimate by the divisor,
-	subfc	r6,r10,r6	# take the product from the divisor,
-	add	r8,r8,r11	# and add the estimate to the accumulated
-	subfe.	r5,r9,r5	# quotient
-	bne	1b
-3:	cmplw	r6,r4
-	blt	4f
-	divwu	r0,r6,r4	# perform the remaining 32-bit division
-	mullw	r10,r0,r4	# and get the remainder
-	add	r8,r8,r0
-	subf	r6,r10,r6
-4:	stw	r7,0(r3)	# return the quotient in *r3
-	stw	r8,4(r3)
-	mr	r3,r6		# return the remainder in r3
-	blr
diff --git a/arch/ppc/boot/lib/kbd.c b/arch/ppc/boot/lib/kbd.c
deleted file mode 100644
index 3931727434de..000000000000
--- a/arch/ppc/boot/lib/kbd.c
+++ /dev/null
@@ -1,248 +0,0 @@
-#include <linux/keyboard.h>
-
-#include "defkeymap.c"	/* yeah I know it's bad -- Cort */
-
-
-unsigned char shfts, ctls, alts, caps;
-
-#define	KBDATAP		0x60	/* kbd data port */
-#define	KBSTATUSPORT	0x61	/* kbd status */
-#define	KBSTATP		0x64	/* kbd status port */
-#define	KBINRDY		0x01
-#define	KBOUTRDY	0x02
-
-extern unsigned char inb(int port);
-extern void outb(int port, char val);
-extern void puts(const char *);
-extern void puthex(unsigned long val);
-extern void udelay(long x);
-
-static int kbd(int noblock)
-{
-	unsigned char dt, brk, val;
-	unsigned code;
-loop:
-	if (noblock) {
-	    if ((inb(KBSTATP) & KBINRDY) == 0)
-		return (-1);
-	} else while((inb(KBSTATP) & KBINRDY) == 0) ;
-
-	dt = inb(KBDATAP);
-
-	brk = dt & 0x80;	/* brk == 1 on key release */
-	dt = dt & 0x7f;		/* keycode */
-
-	if (shfts)
-	    code = shift_map[dt];
-	else if (ctls)
-	    code = ctrl_map[dt];
-	else
-	    code = plain_map[dt];
-
-	val = KVAL(code);
-	switch (KTYP(code) & 0x0f) {
-	    case KT_LATIN:
-		if (brk)
-		    break;
-		if (alts)
-		    val |= 0x80;
-		if (val == 0x7f)	/* map delete to backspace */
-		    val = '\b';
-		return val;
-
-	    case KT_LETTER:
-		if (brk)
-		    break;
-		if (caps)
-		    val -= 'a'-'A';
-		return val;
-
-	    case KT_SPEC:
-		if (brk)
-		    break;
-		if (val == KVAL(K_CAPS))
-		    caps = !caps;
-		else if (val == KVAL(K_ENTER)) {
-enter:		    /* Wait for key up */
-		    while (1) {
-			while((inb(KBSTATP) & KBINRDY) == 0) ;
-			dt = inb(KBDATAP);
-			if (dt & 0x80) /* key up */ break;
-		    }
-		    return 10;
-		}
-		break;
-
-	    case KT_PAD:
-		if (brk)
-		    break;
-		if (val < 10)
-		    return val;
-		if (val == KVAL(K_PENTER))
-		    goto enter;
-		break;
-
-	    case KT_SHIFT:
-		switch (val) {
-		    case KG_SHIFT:
-		    case KG_SHIFTL:
-		    case KG_SHIFTR:
-			shfts = brk ? 0 : 1;
-			break;
-		    case KG_ALT:
-		    case KG_ALTGR:
-			alts = brk ? 0 : 1;
-			break;
-		    case KG_CTRL:
-		    case KG_CTRLL:
-		    case KG_CTRLR:
-			ctls = brk ? 0 : 1;
-			break;
-		}
-		break;
-
-	    case KT_LOCK:
-		switch (val) {
-		    case KG_SHIFT:
-		    case KG_SHIFTL:
-		    case KG_SHIFTR:
-			if (brk)
-			    shfts = !shfts;
-			break;
-		    case KG_ALT:
-		    case KG_ALTGR:
-			if (brk)
-			    alts = !alts;
-			break;
-		    case KG_CTRL:
-		    case KG_CTRLL:
-		    case KG_CTRLR:
-			if (brk)
-			    ctls = !ctls;
-			break;
-		}
-		break;
-	}
-	if (brk) return (-1);  /* Ignore initial 'key up' codes */
-	goto loop;
-}
-
-static int __kbdreset(void)
-{
-	unsigned char c;
-	int i, t;
-
-	/* flush input queue */
-	t = 2000;
-	while ((inb(KBSTATP) & KBINRDY))
-	{
-		(void)inb(KBDATAP);
-		if (--t == 0)
-			return 1;
-	}
-	/* Send self-test */
-	t = 20000;
-	while (inb(KBSTATP) & KBOUTRDY)
-		if (--t == 0)
-			return 2;
-	outb(KBSTATP,0xAA);
-	t = 200000;
-	while ((inb(KBSTATP) & KBINRDY) == 0)	/* wait input ready */
-		if (--t == 0)
-			return 3;
-	if ((c = inb(KBDATAP)) != 0x55)
-	{
-		puts("Keyboard self test failed - result:");
-		puthex(c);
-		puts("\n");
-	}
-	/* Enable interrupts and keyboard controller */
-	t = 20000;
-	while (inb(KBSTATP) & KBOUTRDY)
-		if (--t == 0) return 4;
-	outb(KBSTATP,0x60);
-	t = 20000;
-	while (inb(KBSTATP) & KBOUTRDY)
-		if (--t == 0) return 5;
-	outb(KBDATAP,0x45);
-	for (i = 0;  i < 10000;  i++) udelay(1);
-
-	t = 20000;
-	while (inb(KBSTATP) & KBOUTRDY)
-		if (--t == 0) return 6;
-	outb(KBSTATP,0x20);
-	t = 200000;
-	while ((inb(KBSTATP) & KBINRDY) == 0)	/* wait input ready */
-		if (--t == 0) return 7;
-	if (! (inb(KBDATAP) & 0x40)) {
-		/*
-		 * Quote from PS/2 System Reference Manual:
-		 *
-		 * "Address hex 0060 and address hex 0064 should be
-		 * written only when the input-buffer-full bit and
-		 * output-buffer-full bit in the Controller Status
-		 * register are set 0." (KBINRDY and KBOUTRDY)
-		 */
-		t = 200000;
-		while (inb(KBSTATP) & (KBINRDY | KBOUTRDY))
-			if (--t == 0) return 8;
-		outb(KBDATAP,0xF0);
-		t = 200000;
-		while (inb(KBSTATP) & (KBINRDY | KBOUTRDY))
-			if (--t == 0) return 9;
-		outb(KBDATAP,0x01);
-	}
-	t = 20000;
-	while (inb(KBSTATP) & KBOUTRDY)
-		if (--t == 0) return 10;
-	outb(KBSTATP,0xAE);
-	return 0;
-}
-
-static void kbdreset(void)
-{
-	int ret = __kbdreset();
-
-	if (ret) {
-		puts("__kbdreset failed: ");
-		puthex(ret);
-		puts("\n");
-	}
-}
-
-/* We have to actually read the keyboard when CRT_tstc is called,
- * since the pending data might be a key release code, and therefore
- * not valid data.  In this case, kbd() will return -1, even though there's
- * data to be read.  Of course, we might actually read a valid key press,
- * in which case it gets queued into key_pending for use by CRT_getc.
- */
-
-static int kbd_reset = 0;
-
-static int key_pending = -1;
-
-int CRT_getc(void)
-{
-	int c;
-	if (!kbd_reset) {kbdreset(); kbd_reset++; }
-
-        if (key_pending != -1) {
-                c = key_pending;
-                key_pending = -1;
-                return c;
-        } else {
-	while ((c = kbd(0)) == 0) ;
-                return c;
-        }
-}
-
-int CRT_tstc(void)
-{
-	if (!kbd_reset) {kbdreset(); kbd_reset++; }
-
-        while (key_pending == -1 && ((inb(KBSTATP) & KBINRDY) != 0)) {
-                key_pending = kbd(1);
-        }
-
-        return (key_pending != -1);
-}
diff --git a/arch/ppc/boot/lib/vreset.c b/arch/ppc/boot/lib/vreset.c
deleted file mode 100644
index 98539e9f7f96..000000000000
--- a/arch/ppc/boot/lib/vreset.c
+++ /dev/null
@@ -1,805 +0,0 @@
-/*
- * vreset.c
- *
- * Initialize the VGA control registers to 80x25 text mode.
- *
- * Adapted from a program by:
- *                                      Steve Sellgren
- *                                      San Francisco Indigo Company
- *                                      sfindigo!sellgren@uunet.uu.net
- *
- * Original concept by:
- *                                      Gary Thomas <gdt@linuxppc.org>
- * Adapted for Moto boxes by:
- *                                      Pat Kane & Mark Scott, 1996
- * Adapted for IBM portables by:
- *                                      Takeshi Ishimoto
- * Multi-console support:
- *                                      Terje Malmedal <terje.malmedal@usit.uio.no>
- */
-
-#include "iso_font.h"
-#include "nonstdio.h"
-
-extern char *vidmem;
-extern int lines, cols;
-struct VaRegs;
-
-/*
- * VGA Register
- */
-struct VgaRegs
-{
-	unsigned short io_port;
-	unsigned char  io_index;
-	unsigned char  io_value;
-};
-
-void unlockVideo(int slot);
-void setTextRegs(struct VgaRegs *svp);
-void setTextCLUT(int shift);
-void clearVideoMemory(void);
-void loadFont(unsigned char *ISA_mem);
-
-static void mdelay(int ms)
-{
-	for (; ms > 0; --ms)
-		udelay(1000);
-}
-
-/*
- * Default console text mode registers  used to reset
- * graphics adapter.
- */
-#define NREGS 54
-#define ENDMK  0xFFFF  /* End marker */
-
-#define S3Vendor	0x5333
-#define CirrusVendor    0x1013
-#define DiamondVendor   0x100E
-#define MatroxVendor    0x102B
-#define ParadiseVendor  0x101C
-
-struct VgaRegs GenVgaTextRegs[NREGS+1] = {
-	/* port		index	value  */
-	/* SR Regs */
-	{ 0x3c4,	0x1,	0x0 },
-	{ 0x3c4,	0x2,	0x3 },
-	{ 0x3c4,	0x3,	0x0 },
-	{ 0x3c4,	0x4,	0x2 },
-	 /* CR Regs */
-	{ 0x3d4,	0x0,	0x5f },
-	{ 0x3d4,	0x1,	0x4f },
-	{ 0x3d4,	0x2,	0x50 },
-	{ 0x3d4,	0x3,	0x82 },
-	{ 0x3d4,	0x4,	0x55 },
-	{ 0x3d4,	0x5,	0x81 },
-	{ 0x3d4,	0x6,	0xbf },
-	{ 0x3d4,	0x7,	0x1f },
-	{ 0x3d4,	0x8,	0x00 },
-	{ 0x3d4,	0x9,	0x4f },
-	{ 0x3d4,	0xa,	0x0d },
-	{ 0x3d4,	0xb,	0x0e },
-	{ 0x3d4,	0xc,	0x00 },
-	{ 0x3d4,	0xd,	0x00 },
-	{ 0x3d4,	0xe,	0x00 },
-	{ 0x3d4,	0xf,	0x00 },
-	{ 0x3d4,	0x10,	0x9c },
-	{ 0x3d4,	0x11,	0x8e },
-	{ 0x3d4,	0x12,	0x8f },
-	{ 0x3d4,	0x13,	0x28 },
-	{ 0x3d4,	0x14,	0x1f },
-	{ 0x3d4,	0x15,	0x96 },
-	{ 0x3d4,	0x16,	0xb9 },
-	{ 0x3d4,	0x17,	0xa3 },
-	 /* GR Regs */
-	{ 0x3ce,	0x0,	0x0 },
-	{ 0x3ce,	0x1,	0x0 },
-	{ 0x3ce,	0x2,	0x0 },
-	{ 0x3ce,	0x3,	0x0 },
-	{ 0x3ce,	0x4,	0x0 },
-	{ 0x3ce,	0x5,	0x10 },
-	{ 0x3ce,	0x6,	0xe },
-	{ 0x3ce,	0x7,	0x0 },
-	{ 0x3ce,	0x8,	0xff },
-	{ ENDMK }
-};
-
-struct RGBColors
-{
-  unsigned char r, g, b;
-};
-
-/*
- * Default console text mode color table.
- * These values were obtained by booting Linux with
- * text mode firmware & then dumping the registers.
- */
-struct RGBColors TextCLUT[256] =
-{
-	/* red	green	blue  */
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x2a },
-	{ 0x0,	0x2a,	0x0 },
-	{ 0x0,	0x2a,	0x2a },
-	{ 0x2a,	0x0,	0x0 },
-	{ 0x2a,	0x0,	0x2a },
-	{ 0x2a,	0x2a,	0x0 },
-	{ 0x2a,	0x2a,	0x2a },
-	{ 0x0,	0x0,	0x15 },
-	{ 0x0,	0x0,	0x3f },
-	{ 0x0,	0x2a,	0x15 },
-	{ 0x0,	0x2a,	0x3f },
-	{ 0x2a,	0x0,	0x15 },
-	{ 0x2a,	0x0,	0x3f },
-	{ 0x2a,	0x2a,	0x15 },
-	{ 0x2a,	0x2a,	0x3f },
-	{ 0x0,	0x15,	0x0 },
-	{ 0x0,	0x15,	0x2a },
-	{ 0x0,	0x3f,	0x0 },
-	{ 0x0,	0x3f,	0x2a },
-	{ 0x2a,	0x15,	0x0 },
-	{ 0x2a,	0x15,	0x2a },
-	{ 0x2a,	0x3f,	0x0 },
-	{ 0x2a,	0x3f,	0x2a },
-	{ 0x0,	0x15,	0x15 },
-	{ 0x0,	0x15,	0x3f },
-	{ 0x0,	0x3f,	0x15 },
-	{ 0x0,	0x3f,	0x3f },
-	{ 0x2a,	0x15,	0x15 },
-	{ 0x2a,	0x15,	0x3f },
-	{ 0x2a,	0x3f,	0x15 },
-	{ 0x2a,	0x3f,	0x3f },
-	{ 0x15,	0x0,	0x0 },
-	{ 0x15,	0x0,	0x2a },
-	{ 0x15,	0x2a,	0x0 },
-	{ 0x15,	0x2a,	0x2a },
-	{ 0x3f,	0x0,	0x0 },
-	{ 0x3f,	0x0,	0x2a },
-	{ 0x3f,	0x2a,	0x0 },
-	{ 0x3f,	0x2a,	0x2a },
-	{ 0x15,	0x0,	0x15 },
-	{ 0x15,	0x0,	0x3f },
-	{ 0x15,	0x2a,	0x15 },
-	{ 0x15,	0x2a,	0x3f },
-	{ 0x3f,	0x0,	0x15 },
-	{ 0x3f,	0x0,	0x3f },
-	{ 0x3f,	0x2a,	0x15 },
-	{ 0x3f,	0x2a,	0x3f },
-	{ 0x15,	0x15,	0x0 },
-	{ 0x15,	0x15,	0x2a },
-	{ 0x15,	0x3f,	0x0 },
-	{ 0x15,	0x3f,	0x2a },
-	{ 0x3f,	0x15,	0x0 },
-	{ 0x3f,	0x15,	0x2a },
-	{ 0x3f,	0x3f,	0x0 },
-	{ 0x3f,	0x3f,	0x2a },
-	{ 0x15,	0x15,	0x15 },
-	{ 0x15,	0x15,	0x3f },
-	{ 0x15,	0x3f,	0x15 },
-	{ 0x15,	0x3f,	0x3f },
-	{ 0x3f,	0x15,	0x15 },
-	{ 0x3f,	0x15,	0x3f },
-	{ 0x3f,	0x3f,	0x15 },
-	{ 0x3f,	0x3f,	0x3f },
-	{ 0x39,	0xc,	0x5 },
-	{ 0x15,	0x2c,	0xf },
-	{ 0x26,	0x10,	0x3d },
-	{ 0x29,	0x29,	0x38 },
-	{ 0x4,	0x1a,	0xe },
-	{ 0x2,	0x1e,	0x3a },
-	{ 0x3c,	0x25,	0x33 },
-	{ 0x3c,	0xc,	0x2c },
-	{ 0x3f,	0x3,	0x2b },
-	{ 0x1c,	0x9,	0x13 },
-	{ 0x25,	0x2a,	0x35 },
-	{ 0x1e,	0xa,	0x38 },
-	{ 0x24,	0x8,	0x3 },
-	{ 0x3,	0xe,	0x36 },
-	{ 0xc,	0x6,	0x2a },
-	{ 0x26,	0x3,	0x32 },
-	{ 0x5,	0x2f,	0x33 },
-	{ 0x3c,	0x35,	0x2f },
-	{ 0x2d,	0x26,	0x3e },
-	{ 0xd,	0xa,	0x10 },
-	{ 0x25,	0x3c,	0x11 },
-	{ 0xd,	0x4,	0x2e },
-	{ 0x5,	0x19,	0x3e },
-	{ 0xc,	0x13,	0x34 },
-	{ 0x2b,	0x6,	0x24 },
-	{ 0x4,	0x3,	0xd },
-	{ 0x2f,	0x3c,	0xc },
-	{ 0x2a,	0x37,	0x1f },
-	{ 0xf,	0x12,	0x38 },
-	{ 0x38,	0xe,	0x2a },
-	{ 0x12,	0x2f,	0x19 },
-	{ 0x29,	0x2e,	0x31 },
-	{ 0x25,	0x13,	0x3e },
-	{ 0x33,	0x3e,	0x33 },
-	{ 0x1d,	0x2c,	0x25 },
-	{ 0x15,	0x15,	0x5 },
-	{ 0x32,	0x25,	0x39 },
-	{ 0x1a,	0x7,	0x1f },
-	{ 0x13,	0xe,	0x1d },
-	{ 0x36,	0x17,	0x34 },
-	{ 0xf,	0x15,	0x23 },
-	{ 0x2,	0x35,	0xd },
-	{ 0x15,	0x3f,	0xc },
-	{ 0x14,	0x2f,	0xf },
-	{ 0x19,	0x21,	0x3e },
-	{ 0x27,	0x11,	0x2f },
-	{ 0x38,	0x3f,	0x3c },
-	{ 0x36,	0x2d,	0x15 },
-	{ 0x16,	0x17,	0x2 },
-	{ 0x1,	0xa,	0x3d },
-	{ 0x1b,	0x11,	0x3f },
-	{ 0x21,	0x3c,	0xd },
-	{ 0x1a,	0x39,	0x3d },
-	{ 0x8,	0xe,	0xe },
-	{ 0x22,	0x21,	0x23 },
-	{ 0x1e,	0x30,	0x5 },
-	{ 0x1f,	0x22,	0x3d },
-	{ 0x1e,	0x2f,	0xa },
-	{ 0x0,	0x1c,	0xe },
-	{ 0x0,	0x1c,	0x15 },
-	{ 0x0,	0x1c,	0x1c },
-	{ 0x0,	0x15,	0x1c },
-	{ 0x0,	0xe,	0x1c },
-	{ 0x0,	0x7,	0x1c },
-	{ 0xe,	0xe,	0x1c },
-	{ 0x11,	0xe,	0x1c },
-	{ 0x15,	0xe,	0x1c },
-	{ 0x18,	0xe,	0x1c },
-	{ 0x1c,	0xe,	0x1c },
-	{ 0x1c,	0xe,	0x18 },
-	{ 0x1c,	0xe,	0x15 },
-	{ 0x1c,	0xe,	0x11 },
-	{ 0x1c,	0xe,	0xe },
-	{ 0x1c,	0x11,	0xe },
-	{ 0x1c,	0x15,	0xe },
-	{ 0x1c,	0x18,	0xe },
-	{ 0x1c,	0x1c,	0xe },
-	{ 0x18,	0x1c,	0xe },
-	{ 0x15,	0x1c,	0xe },
-	{ 0x11,	0x1c,	0xe },
-	{ 0xe,	0x1c,	0xe },
-	{ 0xe,	0x1c,	0x11 },
-	{ 0xe,	0x1c,	0x15 },
-	{ 0xe,	0x1c,	0x18 },
-	{ 0xe,	0x1c,	0x1c },
-	{ 0xe,	0x18,	0x1c },
-	{ 0xe,	0x15,	0x1c },
-	{ 0xe,	0x11,	0x1c },
-	{ 0x14,	0x14,	0x1c },
-	{ 0x16,	0x14,	0x1c },
-	{ 0x18,	0x14,	0x1c },
-	{ 0x1a,	0x14,	0x1c },
-	{ 0x1c,	0x14,	0x1c },
-	{ 0x1c,	0x14,	0x1a },
-	{ 0x1c,	0x14,	0x18 },
-	{ 0x1c,	0x14,	0x16 },
-	{ 0x1c,	0x14,	0x14 },
-	{ 0x1c,	0x16,	0x14 },
-	{ 0x1c,	0x18,	0x14 },
-	{ 0x1c,	0x1a,	0x14 },
-	{ 0x1c,	0x1c,	0x14 },
-	{ 0x1a,	0x1c,	0x14 },
-	{ 0x18,	0x1c,	0x14 },
-	{ 0x16,	0x1c,	0x14 },
-	{ 0x14,	0x1c,	0x14 },
-	{ 0x14,	0x1c,	0x16 },
-	{ 0x14,	0x1c,	0x18 },
-	{ 0x14,	0x1c,	0x1a },
-	{ 0x14,	0x1c,	0x1c },
-	{ 0x14,	0x1a,	0x1c },
-	{ 0x14,	0x18,	0x1c },
-	{ 0x14,	0x16,	0x1c },
-	{ 0x0,	0x0,	0x10 },
-	{ 0x4,	0x0,	0x10 },
-	{ 0x8,	0x0,	0x10 },
-	{ 0xc,	0x0,	0x10 },
-	{ 0x10,	0x0,	0x10 },
-	{ 0x10,	0x0,	0xc },
-	{ 0x10,	0x0,	0x8 },
-	{ 0x10,	0x0,	0x4 },
-	{ 0x10,	0x0,	0x0 },
-	{ 0x10,	0x4,	0x0 },
-	{ 0x10,	0x8,	0x0 },
-	{ 0x10,	0xc,	0x0 },
-	{ 0x10,	0x10,	0x0 },
-	{ 0xc,	0x10,	0x0 },
-	{ 0x8,	0x10,	0x0 },
-	{ 0x4,	0x10,	0x0 },
-	{ 0x0,	0x10,	0x0 },
-	{ 0x0,	0x10,	0x4 },
-	{ 0x0,	0x10,	0x8 },
-	{ 0x0,	0x10,	0xc },
-	{ 0x0,	0x10,	0x10 },
-	{ 0x0,	0xc,	0x10 },
-	{ 0x0,	0x8,	0x10 },
-	{ 0x0,	0x4,	0x10 },
-	{ 0x8,	0x8,	0x10 },
-	{ 0xa,	0x8,	0x10 },
-	{ 0xc,	0x8,	0x10 },
-	{ 0xe,	0x8,	0x10 },
-	{ 0x10,	0x8,	0x10 },
-	{ 0x10,	0x8,	0xe },
-	{ 0x10,	0x8,	0xc },
-	{ 0x10,	0x8,	0xa },
-	{ 0x10,	0x8,	0x8 },
-	{ 0x10,	0xa,	0x8 },
-	{ 0x10,	0xc,	0x8 },
-	{ 0x10,	0xe,	0x8 },
-	{ 0x10,	0x10,	0x8 },
-	{ 0xe,	0x10,	0x8 },
-	{ 0xc,	0x10,	0x8 },
-	{ 0xa,	0x10,	0x8 },
-	{ 0x8,	0x10,	0x8 },
-	{ 0x8,	0x10,	0xa },
-	{ 0x8,	0x10,	0xc },
-	{ 0x8,	0x10,	0xe },
-	{ 0x8,	0x10,	0x10 },
-	{ 0x8,	0xe,	0x10 },
-	{ 0x8,	0xc,	0x10 },
-	{ 0x8,	0xa,	0x10 },
-	{ 0xb,	0xb,	0x10 },
-	{ 0xc,	0xb,	0x10 },
-	{ 0xd,	0xb,	0x10 },
-	{ 0xf,	0xb,	0x10 },
-	{ 0x10,	0xb,	0x10 },
-	{ 0x10,	0xb,	0xf },
-	{ 0x10,	0xb,	0xd },
-	{ 0x10,	0xb,	0xc },
-	{ 0x10,	0xb,	0xb },
-	{ 0x10,	0xc,	0xb },
-	{ 0x10,	0xd,	0xb },
-	{ 0x10,	0xf,	0xb },
-	{ 0x10,	0x10,	0xb },
-	{ 0xf,	0x10,	0xb },
-	{ 0xd,	0x10,	0xb },
-	{ 0xc,	0x10,	0xb },
-	{ 0xb,	0x10,	0xb },
-	{ 0xb,	0x10,	0xc },
-	{ 0xb,	0x10,	0xd },
-	{ 0xb,	0x10,	0xf },
-	{ 0xb,	0x10,	0x10 },
-	{ 0xb,	0xf,	0x10 },
-	{ 0xb,	0xd,	0x10 },
-	{ 0xb,	0xc,	0x10 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 },
-	{ 0x0,	0x0,	0x0 }
-};
-
-unsigned char AC[21] = {
-    0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07,
-    0x38, 0x39, 0x3A, 0x3B, 0x3C, 0x3D, 0x3E, 0x3F,
-    0x0C, 0x00, 0x0F, 0x08, 0x00};
-
-static int scanPCI(int start_slt);
-static int PCIVendor(int);
-#ifdef DEBUG
-static void printslots(void);
-#endif
-extern void puthex(unsigned long);
-extern void puts(const char *);
-static void unlockS3(void);
-
-static inline void
-outw(int port, unsigned short val)
-{
-	outb(port, val >> 8);
-	outb(port+1, val);
-}
-
-int
-vga_init(unsigned char *ISA_mem)
-{
-	int slot;
-	struct VgaRegs *VgaTextRegs;
-
-	/* See if VGA already in TEXT mode - exit if so! */
-	outb(0x3CE, 0x06);
-	if ((inb(0x3CF) & 0x01) == 0){
-		puts("VGA already in text mode\n");
-		return 0;
-	}
-
-	/* If no VGA responding in text mode, then we have some work to do...
-	 */
-	slot = -1;
-	while((slot = scanPCI(slot)) > -1) { /* find video card in use  */
-		unlockVideo(slot);           /* enable I/O to card      */
-		VgaTextRegs = GenVgaTextRegs;
-
-		switch (PCIVendor(slot)) {
-		default:
-			break;
-		case(S3Vendor):
-			unlockS3();
-			break;
-
-		case(CirrusVendor):
-			outw(0x3C4, 0x0612);       /* unlock ext regs */
-			outw(0x3C4, 0x0700);       /* reset ext sequence mode */
-			break;
-
-		case(ParadiseVendor):                 /* IBM Portable 850 */
-			outw(0x3ce, 0x0f05);      /* unlock pardise registers */
-			outw(0x3c4, 0x0648);
-			outw(0x3d4, 0x2985);
-			outw(0x3d4, 0x34a6);
-			outb(0x3ce, 0x0b);       /* disable linear addressing */
-			outb(0x3cf, inb(0x3cf) & ~0x30);
-			outw(0x3c4, 0x1400);
-			outb(0x3ce, 0x0e);       /* disable 256 color mode */
-			outb(0x3cf, inb(0x3cf) & ~0x01);
-			outb(0xd00, 0xff);       /* enable auto-centering */
-			if (!(inb(0xd01) & 0x03)) {
-				outb(0x3d4, 0x33);
-				outb(0x3d5, inb(0x3d5) & ~0x90);
-				outb(0x3d4, 0x32);
-				outb(0x3d5, inb(0x3d5) | 0x04);
-				outw(0x3d4, 0x0250);
-				outw(0x3d4, 0x07ba);
-				outw(0x3d4, 0x0900);
-				outw(0x3d4, 0x15e7);
-				outw(0x3d4, 0x2a95);
-			}
-			outw(0x3d4, 0x34a0);
-			break;
-
-	#if 0 /* Untested - probably doesn't work */
-		case(MatroxVendor):
-		case(DiamondVendor):
-			puts("VGA Chip Vendor ID: ");
-			puthex(PCIVendor(slot));
-			puts("\n");
-			mdelay(1000);
-	#endif
-		};
-
-		outw(0x3C4, 0x0120);           /* disable video              */
-		setTextRegs(VgaTextRegs);      /* initial register setup     */
-		setTextCLUT(0);                /* load color lookup table    */
-		loadFont(ISA_mem);             /* load font                  */
-		setTextRegs(VgaTextRegs);      /* reload registers           */
-		outw(0x3C4, 0x0100);           /* re-enable video            */
-		clearVideoMemory();
-
-		if (PCIVendor(slot) == S3Vendor) {
-			outb(0x3c2, 0x63);                  /* MISC */
-		} /* endif */
-
-	#ifdef DEBUG
-		printslots();
-		mdelay(5000);
-	#endif
-
-		mdelay(1000);	/* give time for the video monitor to come up */
-        }
-	return (1);  /* 'CRT' I/O supported */
-}
-
-/*
- * Write to VGA Attribute registers.
- */
-void
-writeAttr(unsigned char index, unsigned char data, unsigned char videoOn)
-{
-	unsigned char v;
-	v = inb(0x3da);   /* reset attr. address toggle */
-	if (videoOn)
-		outb(0x3c0, (index & 0x1F) | 0x20);
-	else
-		outb(0x3c0, (index & 0x1F));
-	outb(0x3c0, data);
-}
-
-void
-setTextRegs(struct VgaRegs *svp)
-{
-	int i;
-
-	/*
-	 *  saved settings
-	 */
-	while( svp->io_port != ENDMK ) {
-		outb(svp->io_port,   svp->io_index);
-		outb(svp->io_port+1, svp->io_value);
-		svp++;
-	}
-
-	outb(0x3c2, 0x67);  /* MISC */
-	outb(0x3c6, 0xff);  /* MASK */
-
-	for ( i = 0; i < 0x10; i++)
-		writeAttr(i, AC[i], 0);  /* palette */
-	writeAttr(0x10, 0x0c, 0);    /* text mode */
-	writeAttr(0x11, 0x00, 0);    /* overscan color (border) */
-	writeAttr(0x12, 0x0f, 0);    /* plane enable */
-	writeAttr(0x13, 0x08, 0);    /* pixel panning */
-	writeAttr(0x14, 0x00, 1);    /* color select; video on  */
-}
-
-void
-setTextCLUT(int shift)
-{
-	int i;
-
-	outb(0x3C6, 0xFF);
-	i = inb(0x3C7);
-	outb(0x3C8, 0);
-	i = inb(0x3C7);
-
-	for ( i = 0; i < 256; i++) {
-		outb(0x3C9, TextCLUT[i].r << shift);
-		outb(0x3C9, TextCLUT[i].g << shift);
-		outb(0x3C9, TextCLUT[i].b << shift);
-	}
-}
-
-void
-loadFont(unsigned char *ISA_mem)
-{
-	int i, j;
-	unsigned char *font_page = (unsigned char *) &ISA_mem[0xA0000];
-
-	outb(0x3C2, 0x67);
-	/*
-	 * Load font
-	 */
-	i = inb(0x3DA);  /* Reset Attr toggle */
-
-	outb(0x3C0,0x30);
-	outb(0x3C0, 0x01);      /* graphics mode */
-
-	outw(0x3C4, 0x0001);    /* reset sequencer */
-	outw(0x3C4, 0x0204);    /* write to plane 2 */
-	outw(0x3C4, 0x0406);    /* enable plane graphics */
-	outw(0x3C4, 0x0003);    /* reset sequencer */
-	outw(0x3CE, 0x0402);    /* read plane 2 */
-	outw(0x3CE, 0x0500);    /* write mode 0, read mode 0 */
-	outw(0x3CE, 0x0605);    /* set graphics mode */
-
-	for (i = 0;  i < sizeof(font);  i += 16) {
-		for (j = 0;  j < 16;  j++) {
-			__asm__ volatile("eieio");
-			font_page[(2*i)+j] = font[i+j];
-		}
-	}
-}
-
-static void
-unlockS3(void)
-{
-        int s3_device_id;
-	outw(0x3d4, 0x3848);
-	outw(0x3d4, 0x39a5);
-	outb(0x3d4, 0x2d);
-	s3_device_id = inb(0x3d5) << 8;
-	outb(0x3d4, 0x2e);
-	s3_device_id |= inb(0x3d5);
-
-	if (s3_device_id != 0x8812) {
-		/* From the S3 manual */
-		outb(0x46E8, 0x10);  /* Put into setup mode */
-		outb(0x3C3, 0x10);
-		outb(0x102, 0x01);   /* Enable registers */
-		outb(0x46E8, 0x08);  /* Enable video */
-		outb(0x3C3, 0x08);
-		outb(0x4AE8, 0x00);
-
-#if 0
-		outb(0x42E8, 0x80);  /* Reset graphics engine? */
-#endif
-
-		outb(0x3D4, 0x38);  /* Unlock all registers */
-		outb(0x3D5, 0x48);
-		outb(0x3D4, 0x39);
-		outb(0x3D5, 0xA5);
-		outb(0x3D4, 0x40);
-		outb(0x3D5, inb(0x3D5)|0x01);
-		outb(0x3D4, 0x33);
-		outb(0x3D5, inb(0x3D5)&~0x52);
-		outb(0x3D4, 0x35);
-		outb(0x3D5, inb(0x3D5)&~0x30);
-		outb(0x3D4, 0x3A);
-		outb(0x3D5, 0x00);
-		outb(0x3D4, 0x53);
-		outb(0x3D5, 0x00);
-		outb(0x3D4, 0x31);
-		outb(0x3D5, inb(0x3D5)&~0x4B);
-		outb(0x3D4, 0x58);
-
-		outb(0x3D5, 0);
-
-		outb(0x3D4, 0x54);
-		outb(0x3D5, 0x38);
-		outb(0x3D4, 0x60);
-		outb(0x3D5, 0x07);
-		outb(0x3D4, 0x61);
-		outb(0x3D5, 0x80);
-		outb(0x3D4, 0x62);
-		outb(0x3D5, 0xA1);
-		outb(0x3D4, 0x69);  /* High order bits for cursor address */
-		outb(0x3D5, 0);
-
-		outb(0x3D4, 0x32);
-		outb(0x3D5, inb(0x3D5)&~0x10);
-	} else {
-                outw(0x3c4, 0x0806);            /* IBM Portable 860 */
-                outw(0x3c4, 0x1041);
-                outw(0x3c4, 0x1128);
-                outw(0x3d4, 0x4000);
-                outw(0x3d4, 0x3100);
-                outw(0x3d4, 0x3a05);
-                outw(0x3d4, 0x6688);
-                outw(0x3d4, 0x5800);            /* disable linear addressing */
-                outw(0x3d4, 0x4500);            /* disable H/W cursor */
-                outw(0x3c4, 0x5410);            /* enable auto-centering */
-                outw(0x3c4, 0x561f);
-                outw(0x3c4, 0x1b80);            /* lock DCLK selection */
-                outw(0x3d4, 0x3900);            /* lock S3 registers */
-                outw(0x3d4, 0x3800);
-	} /* endif */
-}
-
-/*
- * cursor() sets an offset (0-1999) into the 80x25 text area.
- */
-void
-cursor(int x, int y)
-{
-	int pos = (y*cols)+x;
-	outb(0x3D4, 14);
-	outb(0x3D5, pos >> 8);
-	outb(0x3D4, 15);
-	outb(0x3D5, pos);
-}
-
-void
-clearVideoMemory(void)
-{
-	int i, j;
-	for (i = 0;  i < lines;  i++) {
-		for (j = 0;  j < cols;  j++) {
-			vidmem[((i*cols)+j)*2] = 0x20;	/* fill with space character */
-			vidmem[((i*cols)+j)*2+1] = 0x07;  /* set bg & fg attributes */
-		}
-	}
-}
-
-/* ============ */
-
-
-#define NSLOTS 8
-#define NPCIREGS  5
-
-
-/*
- should use devfunc number/indirect method to be totally safe on
- all machines, this works for now on 3 slot Moto boxes
-*/
-
-struct PCI_ConfigInfo {
-  unsigned long * config_addr;
-  unsigned long regs[NPCIREGS];
-} PCI_slots [NSLOTS] = {
-
-    { (unsigned long *)0x80808000, {0xDEADBEEF,} },   /* onboard */
-    { (unsigned long *)0x80800800, {0xDEADBEEF,} },   /* onboard */
-    { (unsigned long *)0x80801000, {0xDEADBEEF,} },   /* onboard */
-    { (unsigned long *)0x80802000, {0xDEADBEEF,} },   /* onboard */
-    { (unsigned long *)0x80804000, {0xDEADBEEF,} },   /* onboard */
-    { (unsigned long *)0x80810000, {0xDEADBEEF,} },   /* slot A/1 */
-    { (unsigned long *)0x80820000, {0xDEADBEEF,} },   /* slot B/2 */
-    { (unsigned long *)0x80840000, {0xDEADBEEF,} }    /* slot C/3 */
-};
-
-
-
-/*
- * The following code modifies the PCI Command register
- * to enable memory and I/O accesses.
- */
-void
-unlockVideo(int slot)
-{
-       volatile unsigned char * ppci;
-
-        ppci =  (unsigned char * )PCI_slots[slot].config_addr;
-	ppci[4] = 0x0003;         /* enable memory and I/O accesses */
-	ppci[0x10] = 0x00000;     /* turn off memory mapping */
-	ppci[0x11] = 0x00000;     /* mem_base = 0 */
-	ppci[0x12] = 0x00000;
-	ppci[0x13] = 0x00000;
-	__asm__ volatile("eieio");
-
-	outb(0x3d4, 0x11);
-	outb(0x3d5, 0x0e);   /* unlock CR0-CR7 */
-}
-
-long
-SwapBytes(long lv)   /* turn little endian into big indian long */
-{
-    long t;
-    t  = (lv&0x000000FF) << 24;
-    t |= (lv&0x0000FF00) << 8;
-    t |= (lv&0x00FF0000) >> 8;
-    t |= (lv&0xFF000000) >> 24;
-    return(t);
-}
-
-
-#define DEVID   0
-#define CMD     1
-#define CLASS   2
-#define MEMBASE 4
-
-int
-scanPCI(int start_slt)
-{
-	int slt, r;
-	struct PCI_ConfigInfo *pslot;
-	int theSlot = -1;
-	int highVgaSlot = 0;
-
-	for ( slt = start_slt + 1; slt < NSLOTS; slt++) {
-		pslot = &PCI_slots[slt];
-		for ( r = 0; r < NPCIREGS; r++) {
-			pslot->regs[r] = SwapBytes ( pslot->config_addr[r] );
-		}
-		/* card in slot ? */
-		if ( pslot->regs[DEVID] != 0xFFFFFFFF ) {
-			/* VGA ? */
-			if ( ((pslot->regs[CLASS] & 0xFFFFFF00) == 0x03000000) ||
-			     ((pslot->regs[CLASS] & 0xFFFFFF00) == 0x00010000)) {
-				highVgaSlot = slt;
-				/* did firmware enable it ? */
-				if ( (pslot->regs[CMD] & 0x03) ) {
-					theSlot = slt;
-					break;
-				}
-			}
-		}
-	}
-
-	return ( theSlot );
-}
-
-/* return Vendor ID of card in the slot */
-static
-int PCIVendor(int slotnum) {
- struct PCI_ConfigInfo *pslot;
-
- pslot = &PCI_slots[slotnum];
-
-return (pslot->regs[DEVID] & 0xFFFF);
-}
-
-#ifdef DEBUG
-static
-void printslots(void)
-{
-	int i;
-#if 0
-	struct PCI_ConfigInfo *pslot;
-#endif
-	for(i=0; i < NSLOTS; i++) {
-#if 0
-		pslot = &PCI_slots[i];
-		printf("Slot: %d, Addr: %x, Vendor: %08x, Class: %08x\n",
-		       i, pslot->config_addr, pslot->regs[0], pslot->regs[2]);
-#else
-		puts("PCI Slot number: "); puthex(i);
-		puts(" Vendor ID: ");
-		puthex(PCIVendor(i)); puts("\n");
-#endif
-	}
-}
-#endif /* DEBUG */
diff --git a/arch/ppc/boot/of1275/Makefile b/arch/ppc/boot/of1275/Makefile
deleted file mode 100644
index 0b979c004972..000000000000
--- a/arch/ppc/boot/of1275/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# Makefile of1275 stuff
-#
-
-lib-y := claim.o enter.o exit.o finddevice.o getprop.o ofinit.o	\
-	 ofstdio.o read.o release.o write.o map.o call_prom.o
diff --git a/arch/ppc/boot/of1275/call_prom.c b/arch/ppc/boot/of1275/call_prom.c
deleted file mode 100644
index 9479a3a2b8c7..000000000000
--- a/arch/ppc/boot/of1275/call_prom.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) 1996-2005 Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-#include <stdarg.h>
-
-int call_prom(const char *service, int nargs, int nret, ...)
-{
-	int i;
-	struct prom_args {
-		const char *service;
-		int nargs;
-		int nret;
-		unsigned int args[12];
-	} args;
-	va_list list;
-
-	args.service = service;
-	args.nargs = nargs;
-	args.nret = nret;
-
-	va_start(list, nret);
-	for (i = 0; i < nargs; i++)
-		args.args[i] = va_arg(list, unsigned int);
-	va_end(list);
-
-	for (i = 0; i < nret; i++)
-		args.args[nargs+i] = 0;
-
-	if (of_prom_entry(&args) < 0)
-		return -1;
-
-	return (nret > 0)? args.args[nargs]: 0;
-}
-
-int call_prom_ret(const char *service, int nargs, int nret,
-		  unsigned int *rets, ...)
-{
-	int i;
-	struct prom_args {
-		const char *service;
-		int nargs;
-		int nret;
-		unsigned int args[12];
-	} args;
-	va_list list;
-
-	args.service = service;
-	args.nargs = nargs;
-	args.nret = nret;
-
-	va_start(list, rets);
-	for (i = 0; i < nargs; i++)
-		args.args[i] = va_arg(list, unsigned int);
-	va_end(list);
-
-	for (i = 0; i < nret; i++)
-		args.args[nargs+i] = 0;
-
-	if (of_prom_entry(&args) < 0)
-		return -1;
-
-	if (rets != (void *) 0)
-		for (i = 1; i < nret; ++i)
-			rets[i-1] = args.args[nargs+i];
-
-	return (nret > 0)? args.args[nargs]: 0;
-}
diff --git a/arch/ppc/boot/of1275/claim.c b/arch/ppc/boot/of1275/claim.c
deleted file mode 100644
index 1ed3aeeff8ae..000000000000
--- a/arch/ppc/boot/of1275/claim.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-#include "nonstdio.h"
-
-/*
- * Older OF's require that when claiming a specific range of addresses,
- * we claim the physical space in the /memory node and the virtual
- * space in the chosen mmu node, and then do a map operation to
- * map virtual to physical.
- */
-static int need_map = -1;
-static ihandle chosen_mmu;
-static phandle memory;
-
-/* returns true if s2 is a prefix of s1 */
-static int string_match(const char *s1, const char *s2)
-{
-	for (; *s2; ++s2)
-		if (*s1++ != *s2)
-			return 0;
-	return 1;
-}
-
-static int check_of_version(void)
-{
-	phandle oprom, chosen;
-	char version[64];
-
-	oprom = finddevice("/openprom");
-	if (oprom == OF_INVALID_HANDLE)
-		return 0;
-	if (getprop(oprom, "model", version, sizeof(version)) <= 0)
-		return 0;
-	version[sizeof(version)-1] = 0;
-	printf("OF version = '%s'\n", version);
-	if (!string_match(version, "Open Firmware, 1.")
-	    && !string_match(version, "FirmWorks,3."))
-		return 0;
-	chosen = finddevice("/chosen");
-	if (chosen == OF_INVALID_HANDLE) {
-		chosen = finddevice("/chosen@0");
-		if (chosen == OF_INVALID_HANDLE) {
-			printf("no chosen\n");
-			return 0;
-		}
-	}
-	if (getprop(chosen, "mmu", &chosen_mmu, sizeof(chosen_mmu)) <= 0) {
-		printf("no mmu\n");
-		return 0;
-	}
-	memory = (ihandle) call_prom("open", 1, 1, "/memory");
-	if (memory == OF_INVALID_HANDLE) {
-		memory = (ihandle) call_prom("open", 1, 1, "/memory@0");
-		if (memory == OF_INVALID_HANDLE) {
-			printf("no memory node\n");
-			return 0;
-		}
-	}
-	printf("old OF detected\n");
-	return 1;
-}
-
-void *claim(unsigned int virt, unsigned int size, unsigned int align)
-{
-	int ret;
-	unsigned int result;
-
-	if (need_map < 0)
-		need_map = check_of_version();
-	if (align || !need_map)
-		return (void *) call_prom("claim", 3, 1, virt, size, align);
-	
-	ret = call_prom_ret("call-method", 5, 2, &result, "claim", memory,
-			    align, size, virt);
-	if (ret != 0 || result == -1)
-		return (void *) -1;
-	ret = call_prom_ret("call-method", 5, 2, &result, "claim", chosen_mmu,
-			    align, size, virt);
-	/* 0x12 == coherent + read/write */
-	ret = call_prom("call-method", 6, 1, "map", chosen_mmu,
-			0x12, size, virt, virt);
-	return virt;
-}
diff --git a/arch/ppc/boot/of1275/enter.c b/arch/ppc/boot/of1275/enter.c
deleted file mode 100644
index abe87a8fe2db..000000000000
--- a/arch/ppc/boot/of1275/enter.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-void
-enter(void)
-{
-    struct prom_args {
-	char *service;
-    } args;
-
-    args.service = "enter";
-    (*of_prom_entry)(&args);
-}
diff --git a/arch/ppc/boot/of1275/exit.c b/arch/ppc/boot/of1275/exit.c
deleted file mode 100644
index b9f89b6a8b45..000000000000
--- a/arch/ppc/boot/of1275/exit.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-void
-exit(void)
-{
-    struct prom_args {
-	char *service;
-    } args;
-
-    for (;;) {
-	args.service = "exit";
-	(*of_prom_entry)(&args);
-    }
-}
diff --git a/arch/ppc/boot/of1275/finddevice.c b/arch/ppc/boot/of1275/finddevice.c
deleted file mode 100644
index 0dcb1201b772..000000000000
--- a/arch/ppc/boot/of1275/finddevice.c
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-phandle finddevice(const char *name)
-{
-	return (phandle) call_prom("finddevice", 1, 1, name);
-}
diff --git a/arch/ppc/boot/of1275/getprop.c b/arch/ppc/boot/of1275/getprop.c
deleted file mode 100644
index 0cf75f035e4e..000000000000
--- a/arch/ppc/boot/of1275/getprop.c
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-int
-getprop(phandle node, const char *name, void *buf, int buflen)
-{
-    struct prom_args {
-	char *service;
-	int nargs;
-	int nret;
-	phandle node;
-	const char *name;
-	void *buf;
-	int buflen;
-	int size;
-    } args;
-
-    args.service = "getprop";
-    args.nargs = 4;
-    args.nret = 1;
-    args.node = node;
-    args.name = name;
-    args.buf = buf;
-    args.buflen = buflen;
-    args.size = -1;
-    (*of_prom_entry)(&args);
-    return args.size;
-}
diff --git a/arch/ppc/boot/of1275/map.c b/arch/ppc/boot/of1275/map.c
deleted file mode 100644
index 443256c6f6d6..000000000000
--- a/arch/ppc/boot/of1275/map.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-#include "nonstdio.h"
-
-extern ihandle of_prom_mmu;
-
-int
-map(unsigned int phys, unsigned int virt, unsigned int size)
-{
-    struct prom_args {
-	char *service;
-	int nargs;
-	int nret;
-	char *method;
-	ihandle mmu_ihandle;
-	int misc;
-	unsigned int size;
-	unsigned int virt;
-	unsigned int phys;
-	int ret0;
-    } args;
-
-    if (of_prom_mmu == 0) {
-    	printf("map() called, no MMU found\n");
-    	return -1;
-    }
-    args.service = "call-method";
-    args.nargs = 6;
-    args.nret = 1;
-    args.method = "map";
-    args.mmu_ihandle = of_prom_mmu;
-    args.misc = 0;
-    args.phys = phys;
-    args.virt = virt;
-    args.size = size;
-    (*of_prom_entry)(&args);
-
-    return (int)args.ret0;
-}
diff --git a/arch/ppc/boot/of1275/ofinit.c b/arch/ppc/boot/of1275/ofinit.c
deleted file mode 100644
index 0ee8af7639e9..000000000000
--- a/arch/ppc/boot/of1275/ofinit.c
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-prom_entry of_prom_entry;
-ihandle of_prom_mmu;
-
-void
-ofinit(prom_entry prom_ptr)
-{
-    phandle chosen;
-
-    of_prom_entry = prom_ptr;
-
-    if ((chosen = finddevice("/chosen")) == OF_INVALID_HANDLE)
-	return;
-    if (getprop(chosen, "mmu", &of_prom_mmu, sizeof(ihandle)) != 4)
-	return;
-}
diff --git a/arch/ppc/boot/of1275/ofstdio.c b/arch/ppc/boot/of1275/ofstdio.c
deleted file mode 100644
index 10abbe32b31f..000000000000
--- a/arch/ppc/boot/of1275/ofstdio.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-int
-ofstdio(ihandle *stdin, ihandle *stdout, ihandle *stderr)
-{
-    ihandle in, out;
-    phandle chosen;
-
-    if ((chosen = finddevice("/chosen")) == OF_INVALID_HANDLE)
-	goto err;
-    if (getprop(chosen, "stdout", &out, sizeof(out)) != 4)
-	goto err;
-    if (getprop(chosen, "stdin", &in, sizeof(in)) != 4)
-	goto err;
-
-    *stdin  = in;
-    *stdout = out;
-    *stderr = out;
-    return 0;
-err:
-    return -1;
-}
diff --git a/arch/ppc/boot/of1275/read.c b/arch/ppc/boot/of1275/read.c
deleted file mode 100644
index 122813649fce..000000000000
--- a/arch/ppc/boot/of1275/read.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-int
-read(ihandle instance, void *buf, int buflen)
-{
-    struct prom_args {
-	char *service;
-	int nargs;
-	int nret;
-	ihandle instance;
-	void *buf;
-	int buflen;
-	int actual;
-    } args;
-
-    args.service = "read";
-    args.nargs = 3;
-    args.nret = 1;
-    args.instance = instance;
-    args.buf = buf;
-    args.buflen = buflen;
-    args.actual = -1;
-    (*of_prom_entry)(&args);
-    return args.actual;
-}
diff --git a/arch/ppc/boot/of1275/release.c b/arch/ppc/boot/of1275/release.c
deleted file mode 100644
index 28032d37145d..000000000000
--- a/arch/ppc/boot/of1275/release.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-void
-release(void *virt, unsigned int size)
-{
-    struct prom_args {
-	char *service;
-	int nargs;
-	int nret;
-	void *virt;
-	unsigned int size;
-    } args;
-
-    args.service = "release";
-    args.nargs = 2;
-    args.nret = 0;
-    args.virt = virt;
-    args.size = size;
-    (*of_prom_entry)(&args);
-}
diff --git a/arch/ppc/boot/of1275/write.c b/arch/ppc/boot/of1275/write.c
deleted file mode 100644
index 7361b9b2fca5..000000000000
--- a/arch/ppc/boot/of1275/write.c
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) Paul Mackerras 1997.
- * Copyright (C) Leigh Brown 2002.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include "of1275.h"
-
-int
-write(ihandle instance, void *buf, int buflen)
-{
-    struct prom_args {
-	char *service;
-	int nargs;
-	int nret;
-	ihandle instance;
-	void *buf;
-	int buflen;
-	int actual;
-    } args;
-
-    args.service = "write";
-    args.nargs = 3;
-    args.nret = 1;
-    args.instance = instance;
-    args.buf = buf;
-    args.buflen = buflen;
-    args.actual = -1;
-    (*of_prom_entry)(&args);
-    return args.actual;
-}
diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile
deleted file mode 100644
index 5b877792d14f..000000000000
--- a/arch/ppc/boot/simple/Makefile
+++ /dev/null
@@ -1,277 +0,0 @@
-# This is far from simple, but I couldn't think of a good name.  This is
-# for making the 'zImage' or 'zImage.initrd' on a number of targets.
-#
-# Author: Tom Rini <trini@mvista.com>
-#
-# Notes:
-# (1) For machines that do not want to use the ELF image directly (including
-# stripping just the ELF header off), they must set the variables
-# zimage-$(CONFIG_MACHINE) and zimagerd-$(CONFIG_MACHINE) to the target
-# that produces the desired image and they must set end-$(CONFIG_MACHINE)
-# to what will be suffixed to the image filename.
-# (2) Regardless of (1), to have the resulting image be something other
-# than 'zImage.elf', set end-$(CONFIG_MACHINE) to be the suffix used for
-# the zImage, znetboot, and znetbootrd targets.
-# (3) For machine targets which use the mktree program, you can optionally
-# set entrypoint-$(CONFIG_MACHINE) to the location which the image should be
-# loaded at.  The optimal setting for entrypoint-$(CONFIG_MACHINE) is the link
-# address.
-# (4) It is advisable to pass in the memory size using BI_MEMSIZE and
-# get_mem_size(), which is memory controller dependent.  Add in the correct
-# XXX_memory.o file for this to work, as well as editing the
-# misc-$(CONFIG_MACHINE) variable.
-
-boot				:= arch/ppc/boot
-common				:= $(boot)/common
-utils				:= $(boot)/utils
-bootlib				:= $(boot)/lib
-images				:= $(boot)/images
-of1275				:= $(boot)/of1275
-tftpboot			:= /tftpboot
-
-# Normally, we use the 'misc.c' file for decompress_kernel and
-# whatnot.  Sometimes we need to override this however.
-misc-y	:= misc.o
-
-# Normally, we have our images end in .elf, but something we want to
-# change this.
-end-y := elf
-
-# Additionally, we normally don't need to mess with the L2 / L3 caches
-# if present on 'classic' PPC.
-cacheflag-y	:= -DCLEAR_CACHES=""
-# This file will flush / disable the L2, and L3 if present.
-clear_L2_L3	:= $(srctree)/$(boot)/simple/clear.S
-
-#
-# See arch/ppc/kconfig and arch/ppc/platforms/Kconfig
-# for definition of what platform each config option refer to.
-#----------------------------------------------------------------------------
-      zimage-$(CONFIG_CPCI690)		:= zImage-STRIPELF
-zimageinitrd-$(CONFIG_CPCI690)		:= zImage.initrd-STRIPELF
-     extra.o-$(CONFIG_CPCI690)		:= misc-cpci690.o
-         end-$(CONFIG_CPCI690)		:= cpci690
-   cacheflag-$(CONFIG_CPCI690)		:= -include $(clear_L2_L3)
-
-      zimage-$(CONFIG_IBM_OPENBIOS)	:= zImage-TREE
-zimageinitrd-$(CONFIG_IBM_OPENBIOS)	:= zImage.initrd-TREE
-         end-$(CONFIG_IBM_OPENBIOS)	:= treeboot
-        misc-$(CONFIG_IBM_OPENBIOS)	:= misc-embedded.o
-
-         end-$(CONFIG_EMBEDDEDBOOT)	:= embedded
-        misc-$(CONFIG_EMBEDDEDBOOT)	:= misc-embedded.o
-
-      zimage-$(CONFIG_BAMBOO)		:= zImage-TREE
-zimageinitrd-$(CONFIG_BAMBOO)		:= zImage.initrd-TREE
-         end-$(CONFIG_BAMBOO)		:= bamboo
-  entrypoint-$(CONFIG_BAMBOO)		:= 0x01000000
-     extra.o-$(CONFIG_BAMBOO)		:= pibs.o
-
-      zimage-$(CONFIG_BUBINGA)		:= zImage-TREE
-zimageinitrd-$(CONFIG_BUBINGA)		:= zImage.initrd-TREE
-         end-$(CONFIG_BUBINGA)		:= bubinga
-  entrypoint-$(CONFIG_BUBINGA)		:= 0x01000000
-     extra.o-$(CONFIG_BUBINGA)		:= openbios.o
-
-      zimage-$(CONFIG_EBONY)		:= zImage-TREE
-zimageinitrd-$(CONFIG_EBONY)		:= zImage.initrd-TREE
-         end-$(CONFIG_EBONY)		:= ebony
-  entrypoint-$(CONFIG_EBONY)		:= 0x01000000
-     extra.o-$(CONFIG_EBONY)		:= openbios.o
-
-      zimage-$(CONFIG_LUAN)		:= zImage-TREE
-zimageinitrd-$(CONFIG_LUAN)		:= zImage.initrd-TREE
-         end-$(CONFIG_LUAN)		:= luan
-  entrypoint-$(CONFIG_LUAN)		:= 0x01000000
-     extra.o-$(CONFIG_LUAN)		:= pibs.o
-
-      zimage-$(CONFIG_YUCCA)		:= zImage-TREE
-zimageinitrd-$(CONFIG_YUCCA)		:= zImage.initrd-TREE
-         end-$(CONFIG_YUCCA)		:= yucca
-  entrypoint-$(CONFIG_YUCCA)		:= 0x01000000
-     extra.o-$(CONFIG_YUCCA)		:= pibs.o
-
-      zimage-$(CONFIG_OCOTEA)		:= zImage-TREE
-zimageinitrd-$(CONFIG_OCOTEA)		:= zImage.initrd-TREE
-         end-$(CONFIG_OCOTEA)		:= ocotea
-  entrypoint-$(CONFIG_OCOTEA)		:= 0x01000000
-     extra.o-$(CONFIG_OCOTEA)		:= pibs.o
-
-      zimage-$(CONFIG_SYCAMORE)		:= zImage-TREE
-zimageinitrd-$(CONFIG_SYCAMORE)		:= zImage.initrd-TREE
-         end-$(CONFIG_SYCAMORE)		:= sycamore
-  entrypoint-$(CONFIG_SYCAMORE)		:= 0x01000000
-     extra.o-$(CONFIG_SYCAMORE)		:= openbios.o
-
-      zimage-$(CONFIG_WALNUT)		:= zImage-TREE
-zimageinitrd-$(CONFIG_WALNUT)		:= zImage.initrd-TREE
-         end-$(CONFIG_WALNUT)		:= walnut
-  entrypoint-$(CONFIG_WALNUT)		:= 0x01000000
-     extra.o-$(CONFIG_WALNUT)		:= openbios.o
-
-     extra.o-$(CONFIG_EV64260)		:= misc-ev64260.o
-         end-$(CONFIG_EV64260)		:= ev64260
-   cacheflag-$(CONFIG_EV64260)		:= -include $(clear_L2_L3)
-
-     extra.o-$(CONFIG_CHESTNUT)		:= misc-chestnut.o
-         end-$(CONFIG_CHESTNUT)		:= chestnut
-
-     extra.o-$(CONFIG_KATANA)		:= misc-katana.o
-         end-$(CONFIG_KATANA)		:= katana
-   cacheflag-$(CONFIG_KATANA)		:= -include $(clear_L2_L3)
-
-     extra.o-$(CONFIG_RADSTONE_PPC7D)	:= misc-radstone_ppc7d.o
-         end-$(CONFIG_RADSTONE_PPC7D)	:= radstone_ppc7d
-   cacheflag-$(CONFIG_RADSTONE_PPC7D)	:= -include $(clear_L2_L3)
-
-     extra.o-$(CONFIG_EV64360)          := misc-ev64360.o
-         end-$(CONFIG_EV64360)          := ev64360
-   cacheflag-$(CONFIG_EV64360)          := -include $(clear_L2_L3)
-
-# kconfig 'feature', only one of these will ever be 'y' at a time.
-# The rest will be unset.
-motorola := $(CONFIG_MVME5100)$(CONFIG_PRPMC750) \
-$(CONFIG_PRPMC800)$(CONFIG_LOPEC)$(CONFIG_PPLUS)
-motorola := $(strip $(motorola))
-
-      zimage-$(motorola)		:= zImage-PPLUS
-zimageinitrd-$(motorola)		:= zImage.initrd-PPLUS
-         end-$(motorola)		:= pplus
-
-# Overrides previous assingment
-     extra.o-$(CONFIG_PPLUS)		:= prepmap.o
-     extra.o-$(CONFIG_LOPEC)		:= mpc10x_memory.o
-
-# Really only valid if CONFIG_6xx=y
-      zimage-$(CONFIG_PPC_PREP)		:= zImage-PPLUS
-zimageinitrd-$(CONFIG_PPC_PREP)		:= zImage.initrd-PPLUS
-ifeq ($(CONFIG_6xx),y)
-     extra.o-$(CONFIG_PPC_PREP)		:= prepmap.o
-        misc-$(CONFIG_PPC_PREP)		+= misc-prep.o mpc10x_memory.o
-endif
-         end-$(CONFIG_PPC_PREP)		:= prep
-
-         end-$(CONFIG_SANDPOINT)	:= sandpoint
-   cacheflag-$(CONFIG_SANDPOINT)	:= -include $(clear_L2_L3)
-
-      zimage-$(CONFIG_SPRUCE)		:= zImage-TREE
-zimageinitrd-$(CONFIG_SPRUCE)		:= zImage.initrd-TREE
-         end-$(CONFIG_SPRUCE)		:= spruce
-  entrypoint-$(CONFIG_SPRUCE)		:= 0x00800000
-        misc-$(CONFIG_SPRUCE)		+= misc-spruce.o
-
-      zimage-$(CONFIG_LITE5200)		:= zImage-STRIPELF
-zimageinitrd-$(CONFIG_LITE5200)		:= zImage.initrd-STRIPELF
-         end-$(CONFIG_LITE5200)		:= lite5200
-   cacheflag-$(CONFIG_LITE5200)		:= -include $(clear_L2_L3)
-
-
-# SMP images should have a '.smp' suffix.
-         end-$(CONFIG_SMP)             := $(end-y).smp
-
-# This is a treeboot that needs init functions until the
-# boot rom is sorted out (i.e. this is short lived)
-EXTRA_AFLAGS := $(extra-aflags-y)
-# head.o needs to get the cacheflags defined.
-AFLAGS_head.o				+= $(cacheflag-y)
-
-# Linker args.  This specifies where the image will be run at.
-LD_ARGS					:= -T $(srctree)/$(boot)/ld.script \
-				   -Ttext $(CONFIG_BOOT_LOAD) -Bstatic
-OBJCOPY_ARGS			:= -O elf32-powerpc
-
-# head.o and relocate.o must be at the start.
-boot-y				:= head.o relocate.o $(extra.o-y) $(misc-y)
-boot-$(CONFIG_REDWOOD_5)	+= embed_config.o
-boot-$(CONFIG_REDWOOD_6)	+= embed_config.o
-boot-$(CONFIG_8xx)		+= embed_config.o
-boot-$(CONFIG_8260)		+= embed_config.o
-boot-$(CONFIG_EP405)		+= embed_config.o
-boot-$(CONFIG_XILINX_ML300)	+= embed_config.o
-boot-$(CONFIG_XILINX_ML403)	+= embed_config.o
-boot-$(CONFIG_BSEIP)		+= iic.o
-boot-$(CONFIG_MBX)		+= iic.o pci.o qspan_pci.o
-boot-$(CONFIG_MV64X60)		+= misc-mv64x60.o
-boot-$(CONFIG_RPXCLASSIC)	+= iic.o pci.o qspan_pci.o
-boot-$(CONFIG_RPXLITE)		+= iic.o
-# Different boards need different serial implementations.
-ifeq ($(CONFIG_SERIAL_CPM_CONSOLE),y)
-boot-$(CONFIG_8xx)		+= m8xx_tty.o
-boot-$(CONFIG_8260)		+= m8260_tty.o
-endif
-boot-$(CONFIG_SERIAL_MPC52xx_CONSOLE)	+= mpc52xx_tty.o
-boot-$(CONFIG_SERIAL_MPSC_CONSOLE)	+= mv64x60_tty.o
-boot-$(CONFIG_SERIAL_UARTLITE_CONSOLE)	+= uartlite_tty.o
-
-LIBS				:= $(common)/lib.a $(bootlib)/lib.a
-ifeq ($(CONFIG_PPC_PREP),y)
-LIBS 				+= $(of1275)/lib.a
-endif
-
-OBJS				:= $(addprefix $(obj)/,$(boot-y))
-
-# Tools
-MKBUGBOOT			:= $(utils)/mkbugboot
-MKPREP				:= $(utils)/mkprep
-MKTREE				:= $(utils)/mktree
-
-targets := dummy.o
-
-$(obj)/zvmlinux: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \
-		$(images)/vmlinux.gz $(obj)/dummy.o
-	$(OBJCOPY) $(OBJCOPY_ARGS) \
-		--add-section=.image=$(images)/vmlinux.gz \
-		--set-section-flags=.image=contents,alloc,load,readonly,data \
-		$(obj)/dummy.o $(obj)/image.o
-	$(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS)
-	$(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \
-		-R .stabstr -R .ramdisk
-
-$(obj)/zvmlinux.initrd: $(OBJS) $(LIBS) $(srctree)/$(boot)/ld.script \
-		$(images)/vmlinux.gz $(obj)/dummy.o
-	$(OBJCOPY) $(OBJCOPY_ARGS) \
-		--add-section=.ramdisk=$(images)/ramdisk.image.gz \
-		--set-section-flags=.ramdisk=contents,alloc,load,readonly,data \
-		--add-section=.image=$(images)/vmlinux.gz \
-		--set-section-flags=.image=contents,alloc,load,readonly,data \
-		$(obj)/dummy.o $(obj)/image.o
-	$(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/image.o $(LIBS)
-	$(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab \
-		-R .stabstr
-
-# Sort-of dummy rules, that let us format the image we want.
-zImage: $(images)/$(zimage-y) $(obj)/zvmlinux
-	cp -f $(obj)/zvmlinux $(images)/zImage.elf
-	rm -f $(obj)/zvmlinux
-
-zImage.initrd: $(images)/$(zimageinitrd-y) $(obj)/zvmlinux.initrd
-	cp -f $(obj)/zvmlinux.initrd $(images)/zImage.initrd.elf
-	rm -f $(obj)/zvmlinux.initrd
-
-znetboot: zImage
-	cp $(images)/zImage.$(end-y) $(tftpboot)/zImage.$(end-y)
-
-znetboot.initrd: zImage.initrd
-	cp $(images)/zImage.initrd.$(end-y) $(tftpboot)/zImage.initrd.$(end-y)
-
-$(images)/zImage-STRIPELF: $(obj)/zvmlinux
-	dd if=$(obj)/zvmlinux of=$(images)/zImage.$(end-y) skip=64 bs=1k
-
-$(images)/zImage.initrd-STRIPELF: $(obj)/zvmlinux.initrd
-	dd if=$(obj)/zvmlinux.initrd of=$(images)/zImage.initrd.$(end-y) \
-		skip=64 bs=1k
-
-$(images)/zImage-TREE: $(obj)/zvmlinux $(MKTREE)
-	$(MKTREE) $(obj)/zvmlinux $(images)/zImage.$(end-y) $(entrypoint-y)
-
-$(images)/zImage.initrd-TREE: $(obj)/zvmlinux.initrd $(MKTREE)
-	$(MKTREE) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y) \
-		$(entrypoint-y)
-
-$(images)/zImage-PPLUS: $(obj)/zvmlinux $(MKPREP) $(MKBUGBOOT)
-	$(MKPREP) -pbp $(obj)/zvmlinux $(images)/zImage.$(end-y)
-	$(MKBUGBOOT) $(obj)/zvmlinux $(images)/zImage.bugboot
-
-$(images)/zImage.initrd-PPLUS: $(obj)/zvmlinux.initrd $(MKPREP) $(MKBUGBOOT)
-	$(MKPREP) -pbp $(obj)/zvmlinux.initrd $(images)/zImage.initrd.$(end-y)
-	$(MKBUGBOOT) $(obj)/zvmlinux.initrd $(images)/zImage.initrd.bugboot
diff --git a/arch/ppc/boot/simple/chrpmap.c b/arch/ppc/boot/simple/chrpmap.c
deleted file mode 100644
index 14d9e05d98bb..000000000000
--- a/arch/ppc/boot/simple/chrpmap.c
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * 2004 (C) IBM. This file is licensed under the terms of the GNU General
- * Public License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <nonstdio.h>
-
-void board_isa_init(void)
-{
-	ISA_init(0xFE000000);
-}
diff --git a/arch/ppc/boot/simple/clear.S b/arch/ppc/boot/simple/clear.S
deleted file mode 100644
index 95c5647a0f51..000000000000
--- a/arch/ppc/boot/simple/clear.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Code to call _setup_L2CR to flus, invalidate and disable the L2,
- * and if present, do the same to the L3.
- */
-
-#define CLEAR_CACHES						\
-	bl	_setup_L2CR;					\
-								\
-	/* If 745x, turn off L3CR as well */			\
-	mfspr	r8,SPRN_PVR;					\
-	srwi	r8,r8,16;					\
-								\
-	cmpli	cr0,r8,0x8000;			/* 7450 */	\
-	cmpli	cr1,r8,0x8001;			/* 7455 */	\
-	cmpli	cr2,r8,0x8002;			/* 7457 */	\
-	/* Now test if any are true. */				\
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq;			\
-	cror	4*cr0+eq,4*cr0+eq,4*cr2+eq;			\
-	beql	_setup_L3CR
diff --git a/arch/ppc/boot/simple/cpc700_memory.c b/arch/ppc/boot/simple/cpc700_memory.c
deleted file mode 100644
index d75420a45a59..000000000000
--- a/arch/ppc/boot/simple/cpc700_memory.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * Find memory based upon settings in the CPC700 bridge
- *
- * Author: Dan Cox
- *
- * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <asm/types.h>
-#include <asm/io.h>
-#include "cpc700.h"
-
-unsigned long
-cpc700_get_mem_size(void)
-{
-	int i;
-	unsigned long len, amt;
-
-	/* Start at MB1EA, since MB0EA will most likely be the ending address
-	   for ROM space. */
-	for(len = 0, i = CPC700_MB1EA; i <= CPC700_MB4EA; i+=4) {
-		amt = cpc700_read_memreg(i);
-		if (amt == 0)
-			break;
-		len = amt;
-	}
-
-	return len;
-}
-
-
diff --git a/arch/ppc/boot/simple/dummy.c b/arch/ppc/boot/simple/dummy.c
deleted file mode 100644
index 31dbf45bf99c..000000000000
--- a/arch/ppc/boot/simple/dummy.c
+++ /dev/null
@@ -1,4 +0,0 @@
-int main(void)
-{
-	return 0;
-}
diff --git a/arch/ppc/boot/simple/embed_config.c b/arch/ppc/boot/simple/embed_config.c
deleted file mode 100644
index 3b46792d7b8b..000000000000
--- a/arch/ppc/boot/simple/embed_config.c
+++ /dev/null
@@ -1,938 +0,0 @@
-/* Board specific functions for those embedded 8xx boards that do
- * not have boot monitor support for board information.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/reg.h>
-#ifdef CONFIG_8xx
-#include <asm/mpc8xx.h>
-#endif
-#ifdef CONFIG_8260
-#include <asm/mpc8260.h>
-#include <asm/immap_cpm2.h>
-#endif
-#ifdef CONFIG_40x
-#include <asm/io.h>
-#endif
-#ifdef CONFIG_XILINX_VIRTEX
-#include <platforms/4xx/xparameters/xparameters.h>
-#endif
-extern unsigned long timebase_period_ns;
-
-/* For those boards that don't provide one.
-*/
-#if !defined(CONFIG_MBX)
-static	bd_t	bdinfo;
-#endif
-
-/* IIC functions.
- * These are just the basic master read/write operations so we can
- * examine serial EEPROM.
- */
-extern void	iic_read(uint devaddr, u_char *buf, uint offset, uint count);
-
-/* Supply a default Ethernet address for those eval boards that don't
- * ship with one.  This is an address from the MBX board I have, so
- * it is unlikely you will find it on your network.
- */
-static	ushort	def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };
-
-#if defined(CONFIG_MBX)
-
-/* The MBX hands us a pretty much ready to go board descriptor.  This
- * is where the idea started in the first place.
- */
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*mp;
-	u_char	eebuf[128];
-	int i = 8;
-	bd_t    *bd;
-
-	bd = *bdp;
-
-	/* Read the first 128 bytes of the EEPROM.  There is more,
-	 * but this is all we need.
-	 */
-	iic_read(0xa4, eebuf, 0, 128);
-
-	/* All we are looking for is the Ethernet MAC address.  The
-	 * first 8 bytes are 'MOTOROLA', so check for part of that.
-	 * Next, the VPD describes a MAC 'packet' as being of type 08
-	 * and size 06.  So we look for that and the MAC must follow.
-	 * If there are more than one, we still only care about the first.
-	 * If it's there, assume we have a valid MAC address.  If not,
-	 * grab our default one.
-	 */
-	if ((*(uint *)eebuf) == 0x4d4f544f) {
-		while (i < 127 && !(eebuf[i] == 0x08 && eebuf[i + 1] == 0x06))
-			 i += eebuf[i + 1] + 2;  /* skip this packet */
-
-		if (i == 127)	/* Couldn't find. */
-			mp = (u_char *)def_enet_addr;
-		else
-			mp = &eebuf[i + 2];
-	}
-	else
-		mp = (u_char *)def_enet_addr;
-
-	for (i=0; i<6; i++)
-		bd->bi_enetaddr[i] = *mp++;
-
-	/* The boot rom passes these to us in MHz.  Linux now expects
-	 * them to be in Hz.
-	 */
-	bd->bi_intfreq *= 1000000;
-	bd->bi_busfreq *= 1000000;
-
-	/* Stuff a baud rate here as well.
-	*/
-	bd->bi_baudrate = 9600;
-}
-#endif /* CONFIG_MBX */
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) || \
-	defined(CONFIG_RPX8260) || defined(CONFIG_EP405)
-/* Helper functions for Embedded Planet boards.
-*/
-/* Because I didn't find anything that would do this.......
-*/
-u_char
-aschex_to_byte(u_char *cp)
-{
-	u_char	byte, c;
-
-	c = *cp++;
-
-	if ((c >= 'A') && (c <= 'F')) {
-		c -= 'A';
-		c += 10;
-	} else if ((c >= 'a') && (c <= 'f')) {
-		c -= 'a';
-		c += 10;
-	} else
-		c -= '0';
-
-	byte = c * 16;
-
-	c = *cp;
-
-	if ((c >= 'A') && (c <= 'F')) {
-		c -= 'A';
-		c += 10;
-	} else if ((c >= 'a') && (c <= 'f')) {
-		c -= 'a';
-		c += 10;
-	} else
-		c -= '0';
-
-	byte += c;
-
-	return(byte);
-}
-
-static void
-rpx_eth(bd_t *bd, u_char *cp)
-{
-	int	i;
-
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = aschex_to_byte(cp);
-		cp += 2;
-	}
-}
-
-#ifdef CONFIG_RPX8260
-static uint
-rpx_baseten(u_char *cp)
-{
-	uint	retval;
-
-	retval = 0;
-
-	while (*cp != '\n') {
-		retval *= 10;
-		retval += (*cp) - '0';
-		cp++;
-	}
-	return(retval);
-}
-#endif
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
-static void
-rpx_brate(bd_t *bd, u_char *cp)
-{
-	uint	rate;
-
-	rate = 0;
-
-	while (*cp != '\n') {
-		rate *= 10;
-		rate += (*cp) - '0';
-		cp++;
-	}
-
-	bd->bi_baudrate = rate * 100;
-}
-
-static void
-rpx_cpuspeed(bd_t *bd, u_char *cp)
-{
-	uint	num, den;
-
-	num = den = 0;
-
-	while (*cp != '\n') {
-		num *= 10;
-		num += (*cp) - '0';
-		cp++;
-		if (*cp == '/') {
-			cp++;
-			den = (*cp) - '0';
-			break;
-		}
-	}
-
-	/* I don't know why the RPX just can't state the actual
-	 * CPU speed.....
-	 */
-	if (den) {
-		num /= den;
-		num *= den;
-	}
-	bd->bi_intfreq = bd->bi_busfreq = num * 1000000;
-
-	/* The 8xx can only run a maximum 50 MHz bus speed (until
-	 * Motorola changes this :-).  Greater than 50 MHz parts
-	 * run internal/2 for bus speed.
-	 */
-	if (num > 50)
-		bd->bi_busfreq /= 2;
-}
-#endif
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC) || defined(CONFIG_EP405)
-static void
-rpx_memsize(bd_t *bd, u_char *cp)
-{
-	uint	size;
-
-	size = 0;
-
-	while (*cp != '\n') {
-		size *= 10;
-		size += (*cp) - '0';
-		cp++;
-	}
-
-	bd->bi_memsize = size * 1024 * 1024;
-}
-#endif /* LITE || CLASSIC || EP405 */
-#if defined(CONFIG_EP405)
-static void
-rpx_nvramsize(bd_t *bd, u_char *cp)
-{
-	uint	size;
-
-	size = 0;
-
-	while (*cp != '\n') {
-		size *= 10;
-		size += (*cp) - '0';
-		cp++;
-	}
-
-	bd->bi_nvramsize = size * 1024;
-}
-#endif /* CONFIG_EP405 */
-
-#endif	/* Embedded Planet boards */
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
-
-/* Read the EEPROM on the RPX-Lite board.
-*/
-void
-embed_config(bd_t **bdp)
-{
-	u_char	eebuf[256], *cp;
-	bd_t	*bd;
-
-	/* Read the first 256 bytes of the EEPROM.  I think this
-	 * is really all there is, and I hope if it gets bigger the
-	 * info we want is still up front.
-	 */
-	bd = &bdinfo;
-	*bdp = bd;
-
-#if 1
-	iic_read(0xa8, eebuf, 0, 128);
-	iic_read(0xa8, &eebuf[128], 128, 128);
-
-	/* We look for two things, the Ethernet address and the
-	 * serial baud rate.  The records are separated by
-	 * newlines.
-	 */
-	cp = eebuf;
-	for (;;) {
-		if (*cp == 'E') {
-			cp++;
-			if (*cp == 'A') {
-				cp += 2;
-				rpx_eth(bd, cp);
-			}
-		}
-		if (*cp == 'S') {
-			cp++;
-			if (*cp == 'B') {
-				cp += 2;
-				rpx_brate(bd, cp);
-			}
-		}
-		if (*cp == 'D') {
-			cp++;
-			if (*cp == '1') {
-				cp += 2;
-				rpx_memsize(bd, cp);
-			}
-		}
-		if (*cp == 'H') {
-			cp++;
-			if (*cp == 'Z') {
-				cp += 2;
-				rpx_cpuspeed(bd, cp);
-			}
-		}
-
-		/* Scan to the end of the record.
-		*/
-		while ((*cp != '\n') && (*cp != 0xff))
-			cp++;
-
-		/* If the next character is a 0 or ff, we are done.
-		*/
-		cp++;
-		if ((*cp == 0) || (*cp == 0xff))
-			break;
-	}
-	bd->bi_memstart = 0;
-#else
-	/* For boards without initialized EEPROM.
-	*/
-	bd->bi_memstart = 0;
-	bd->bi_memsize = (8 * 1024 * 1024);
-	bd->bi_intfreq = 48000000;
-	bd->bi_busfreq = 48000000;
-	bd->bi_baudrate = 9600;
-#endif
-}
-#endif /* RPXLITE || RPXCLASSIC */
-
-#ifdef CONFIG_BSEIP
-/* Build a board information structure for the BSE ip-Engine.
- * There is more to come since we will add some environment
- * variables and a function to read them.
- */
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	bd = &bdinfo;
-	*bdp = bd;
-
-	/* Baud rate and processor speed will eventually come
-	 * from the environment variables.
-	 */
-	bd->bi_baudrate = 9600;
-
-	/* Get the Ethernet station address from the Flash ROM.
-	*/
-	cp = (u_char *)0xfe003ffa;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-
-	/* The rest of this should come from the environment as well.
-	*/
-	bd->bi_memstart = 0;
-	bd->bi_memsize = (16 * 1024 * 1024);
-	bd->bi_intfreq = 48000000;
-	bd->bi_busfreq = 48000000;
-}
-#endif /* BSEIP */
-
-#ifdef CONFIG_FADS
-/* Build a board information structure for the FADS.
- */
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	bd = &bdinfo;
-	*bdp = bd;
-
-	/* Just fill in some known values.
-	 */
-	bd->bi_baudrate = 9600;
-
-	/* Use default enet.
-	*/
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-
-	bd->bi_memstart = 0;
-	bd->bi_memsize = (8 * 1024 * 1024);
-	bd->bi_intfreq = 40000000;
-	bd->bi_busfreq = 40000000;
-}
-#endif /* FADS */
-
-#ifdef CONFIG_8260
-/* Compute 8260 clock values if the rom doesn't provide them.
- */
-static unsigned char bus2core_8260[] = {
-/*      0   1   2   3   4   5   6   7   8   9   a   b   c   d   e   f */
-	3,  2,  2,  2,  4,  4,  5,  9,  6, 11,  8, 10,  3, 12,  7,  2,
-	6,  5, 13,  2, 14,  4, 15,  2,  3, 11,  8, 10, 16, 12,  7,  2,
-};
-
-static void
-clk_8260(bd_t *bd)
-{
-	uint	scmr, vco_out, clkin;
-	uint	plldf, pllmf, corecnf;
-	volatile cpm2_map_t	*ip;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-	scmr = ip->im_clkrst.car_scmr;
-
-	/* The clkin is always bus frequency.
-	*/
-	clkin = bd->bi_busfreq;
-
-	/* Collect the bits from the scmr.
-	*/
-	plldf = (scmr >> 12) & 1;
-	pllmf = scmr & 0xfff;
-	corecnf = (scmr >> 24) &0x1f;
-
-	/* This is arithmetic from the 8260 manual.
-	*/
-	vco_out = clkin / (plldf + 1);
-	vco_out *= 2 * (pllmf + 1);
-	bd->bi_vco = vco_out;		/* Save for later */
-
-	bd->bi_cpmfreq = vco_out / 2;	/* CPM Freq, in MHz */
-	bd->bi_intfreq = bd->bi_busfreq * bus2core_8260[corecnf] / 2;
-
-	/* Set Baud rate divisor.  The power up default is divide by 16,
-	 * but we set it again here in case it was changed.
-	 */
-	ip->im_clkrst.car_sccr = 1;	/* DIV 16 BRG */
-	bd->bi_brgfreq = vco_out / 16;
-}
-
-static unsigned char bus2core_8280[] = {
-/*      0   1   2   3   4   5   6   7   8   9   a   b   c   d   e   f */
-	3,  2,  2,  2,  4,  4,  5,  9,  6, 11,  8, 10,  3, 12,  7,  2,
-	6,  5, 13,  2, 14,  2, 15,  2,  3,  2,  2,  2, 16,  2,  2,  2,
-};
-
-static void
-clk_8280(bd_t *bd)
-{
-	uint	scmr, main_clk, clkin;
-	uint	pllmf, corecnf;
-	volatile cpm2_map_t	*ip;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-	scmr = ip->im_clkrst.car_scmr;
-
-	/* The clkin is always bus frequency.
-	*/
-	clkin = bd->bi_busfreq;
-
-	/* Collect the bits from the scmr.
-	*/
-	pllmf = scmr & 0xf;
-	corecnf = (scmr >> 24) & 0x1f;
-
-	/* This is arithmetic from the 8280 manual.
-	*/
-	main_clk = clkin * (pllmf + 1);
-
-	bd->bi_cpmfreq = main_clk / 2;	/* CPM Freq, in MHz */
-	bd->bi_intfreq = bd->bi_busfreq * bus2core_8280[corecnf] / 2;
-
-	/* Set Baud rate divisor.  The power up default is divide by 16,
-	 * but we set it again here in case it was changed.
-	 */
-	ip->im_clkrst.car_sccr = (ip->im_clkrst.car_sccr & 0x3) | 0x1;
-	bd->bi_brgfreq = main_clk / 16;
-}
-#endif
-
-#ifdef CONFIG_SBC82xx
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-	unsigned long pvr;
-
-	bd = *bdp;
-
-	bd = &bdinfo;
-	*bdp = bd;
-	bd->bi_baudrate = 9600;
-	bd->bi_memsize = 256 * 1024 * 1024;	/* just a guess */
-
-	cp = (void*)SBC82xx_MACADDR_NVRAM_SCC1;
-	memcpy(bd->bi_enetaddr, cp, 6);
-
-	/* can busfreq be calculated? */
-	pvr = mfspr(SPRN_PVR);
-	if ((pvr & 0xffff0000) == 0x80820000) {
-		bd->bi_busfreq = 100000000;
-		clk_8280(bd);
-	} else {
-		bd->bi_busfreq = 66000000;
-		clk_8260(bd);
-	}
-
-}
-#endif /* SBC82xx */
-
-#if defined(CONFIG_EST8260) || defined(CONFIG_TQM8260)
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	bd = *bdp;
-#if 0
-	/* This is actually provided by my boot rom.  I have it
-	 * here for those people that may load the kernel with
-	 * a JTAG/COP tool and not the rom monitor.
-	 */
-	bd->bi_baudrate = 115200;
-	bd->bi_intfreq = 200000000;
-	bd->bi_busfreq = 66666666;
-	bd->bi_cpmfreq = 66666666;
-	bd->bi_brgfreq = 33333333;
-	bd->bi_memsize = 16 * 1024 * 1024;
-#else
-	/* The boot rom passes these to us in MHz.  Linux now expects
-	 * them to be in Hz.
-	 */
-	bd->bi_intfreq *= 1000000;
-	bd->bi_busfreq *= 1000000;
-	bd->bi_cpmfreq *= 1000000;
-	bd->bi_brgfreq *= 1000000;
-#endif
-
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-}
-#endif /* EST8260 */
-
-#ifdef CONFIG_SBS8260
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	/* This should provided by the boot rom.
-	 */
-	bd = &bdinfo;
-	*bdp = bd;
-	bd->bi_baudrate = 9600;
-	bd->bi_memsize = 64 * 1024 * 1024;
-
-	/* Set all of the clocks.  We have to know the speed of the
-	 * external clock.  The development board had 66 MHz.
-	 */
-	bd->bi_busfreq = 66666666;
-	clk_8260(bd);
-
-	/* I don't know how to compute this yet.
-	*/
-	bd->bi_intfreq = 133000000;
-
-
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-}
-#endif /* SBS8260 */
-
-#ifdef CONFIG_RPX8260
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp, *keyvals;
-	int	i;
-	bd_t	*bd;
-
-	keyvals = (u_char *)*bdp;
-
-	bd = &bdinfo;
-	*bdp = bd;
-
-	/* This is almost identical to the RPX-Lite/Classic functions
-	 * on the 8xx boards.  It would be nice to have a key lookup
-	 * function in a string, but the format of all of the fields
-	 * is slightly different.
-	 */
-	cp = keyvals;
-	for (;;) {
-		if (*cp == 'E') {
-			cp++;
-			if (*cp == 'A') {
-				cp += 2;
-				rpx_eth(bd, cp);
-			}
-		}
-		if (*cp == 'S') {
-			cp++;
-			if (*cp == 'B') {
-				cp += 2;
-				bd->bi_baudrate = rpx_baseten(cp);
-			}
-		}
-		if (*cp == 'D') {
-			cp++;
-			if (*cp == '1') {
-				cp += 2;
-				bd->bi_memsize = rpx_baseten(cp) * 1024 * 1024;
-			}
-		}
-		if (*cp == 'X') {
-			cp++;
-			if (*cp == 'T') {
-				cp += 2;
-				bd->bi_busfreq = rpx_baseten(cp);
-			}
-		}
-		if (*cp == 'N') {
-			cp++;
-			if (*cp == 'V') {
-				cp += 2;
-				bd->bi_nvsize = rpx_baseten(cp) * 1024 * 1024;
-			}
-		}
-
-		/* Scan to the end of the record.
-		*/
-		while ((*cp != '\n') && (*cp != 0xff))
-			cp++;
-
-		/* If the next character is a 0 or ff, we are done.
-		*/
-		cp++;
-		if ((*cp == 0) || (*cp == 0xff))
-			break;
-	}
-	bd->bi_memstart = 0;
-
-	/* The memory size includes both the 60x and local bus DRAM.
-	 * I don't want to use the local bus DRAM for real memory,
-	 * so subtract it out.  It would be nice if they were separate
-	 * keys.
-	 */
-	bd->bi_memsize -= 32 * 1024 * 1024;
-
-	/* Set all of the clocks.  We have to know the speed of the
-	 * external clock.
-	 */
-	clk_8260(bd);
-
-	/* I don't know how to compute this yet.
-	*/
-	bd->bi_intfreq = 200000000;
-}
-#endif /* RPX6 for testing */
-
-#ifdef CONFIG_ADS8260
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	/* This should provided by the boot rom.
-	 */
-	bd = &bdinfo;
-	*bdp = bd;
-	bd->bi_baudrate = 9600;
-	bd->bi_memsize = 16 * 1024 * 1024;
-
-	/* Set all of the clocks.  We have to know the speed of the
-	 * external clock.  The development board had 66 MHz.
-	 */
-	bd->bi_busfreq = 66666666;
-	clk_8260(bd);
-
-	/* I don't know how to compute this yet.
-	*/
-	bd->bi_intfreq = 200000000;
-
-
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-}
-#endif /* ADS8260 */
-
-#ifdef CONFIG_WILLOW
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd;
-
-	/* Willow has Open Firmware....I should learn how to get this
-	 * information from it.
-	 */
-	bd = &bdinfo;
-	*bdp = bd;
-	bd->bi_baudrate = 9600;
-	bd->bi_memsize = 32 * 1024 * 1024;
-
-	/* Set all of the clocks.  We have to know the speed of the
-	 * external clock.  The development board had 66 MHz.
-	 */
-	bd->bi_busfreq = 66666666;
-	clk_8260(bd);
-
-	/* I don't know how to compute this yet.
-	*/
-	bd->bi_intfreq = 200000000;
-
-
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++) {
-		bd->bi_enetaddr[i] = *cp++;
-	}
-}
-#endif /* WILLOW */
-
-#if defined(CONFIG_XILINX_ML300) || defined(CONFIG_XILINX_ML403)
-void
-embed_config(bd_t ** bdp)
-{
-	static const unsigned long line_size = 32;
-	static const unsigned long congruence_classes = 256;
-	unsigned long addr;
-	unsigned long dccr;
-	uint8_t* cp;
-	bd_t *bd;
-	int i;
-
-	/*
-	 * Invalidate the data cache if the data cache is turned off.
-	 * - The 405 core does not invalidate the data cache on power-up
-	 *   or reset but does turn off the data cache. We cannot assume
-	 *   that the cache contents are valid.
-	 * - If the data cache is turned on this must have been done by
-	 *   a bootloader and we assume that the cache contents are
-	 *   valid.
-	 */
-	__asm__("mfdccr %0": "=r" (dccr));
-	if (dccr == 0) {
-		for (addr = 0;
-		     addr < (congruence_classes * line_size);
-		     addr += line_size) {
-			__asm__("dccci 0,%0": :"b"(addr));
-		}
-	}
-
-	bd = &bdinfo;
-	*bdp = bd;
-	bd->bi_memsize = XPAR_DDR_0_SIZE;
-	bd->bi_intfreq = XPAR_CORE_CLOCK_FREQ_HZ;
-	bd->bi_busfreq = XPAR_PLB_CLOCK_FREQ_HZ;
-	bd->bi_pci_busfreq = XPAR_PCI_0_CLOCK_FREQ_HZ;
-
-	/* Copy the default ethernet address */
-	cp = (u_char *)def_enet_addr;
-	for (i=0; i<6; i++)
-		bd->bi_enetaddr[i] = *cp++;
-
-	timebase_period_ns = 1000000000 / bd->bi_tbfreq;
-	/* see bi_tbfreq definition in arch/ppc/platforms/4xx/xilinx_ml300.h */
-}
-#endif /* CONFIG_XILINX_ML300 || CONFIG_XILINX_ML403 */
-
-#ifdef CONFIG_IBM_OPENBIOS
-/* This could possibly work for all treeboot roms.
-*/
-#if defined(CONFIG_BUBINGA)
-#define BOARD_INFO_VECTOR       0xFFF80B50 /* openbios 1.19 moved this vector down  - armin */
-#else
-#define BOARD_INFO_VECTOR	0xFFFE0B50
-#endif
-
-void
-embed_config(bd_t **bdp)
-{
-	u_char	*cp;
-	int	i;
-	bd_t	*bd, *treeboot_bd;
-	bd_t *(*get_board_info)(void) =
-	    (bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR);
-#if !defined(CONFIG_STB03xxx)
-
-	/* shut down the Ethernet controller that the boot rom
-	 * sometimes leaves running.
-	 */
-	mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);     /* 1st reset MAL */
-	while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; /* wait for the reset */	
-	out_be32((volatile u32*)EMAC0_BASE,0x20000000);        /* then reset EMAC */
-#endif
-
-	bd = &bdinfo;
-	*bdp = bd;
-	if ((treeboot_bd = get_board_info()) != NULL) {
-		memcpy(bd, treeboot_bd, sizeof(bd_t));
-	}
-	else {
-		/* Hmmm...better try to stuff some defaults.
-		*/
-		bd->bi_memsize = 16 * 1024 * 1024;
-		cp = (u_char *)def_enet_addr;
-		for (i=0; i<6; i++) {
-			/* I should probably put different ones here,
-			 * hopefully only one is used.
-			 */
-			bd->BD_EMAC_ADDR(0,i) = *cp;
-
-#ifdef CONFIG_PCI
-			bd->bi_pci_enetaddr[i] = *cp++;
-#endif
-		}
-		bd->bi_tbfreq = 200 * 1000 * 1000;
-		bd->bi_intfreq = 200000000;
-		bd->bi_busfreq = 100000000;
-#ifdef CONFIG_PCI
-		bd->bi_pci_busfreq = 66666666;
-#endif
-	}
-	/* Yeah, this look weird, but on Redwood 4 they are
-	 * different object in the structure.  Sincr Redwwood 5
-	 * and Redwood 6 use OpenBIOS, it requires a special value.
-	 */
-#if defined(CONFIG_REDWOOD_5) || defined (CONFIG_REDWOOD_6)
-	bd->bi_tbfreq = 27 * 1000 * 1000;
-#endif
-	timebase_period_ns = 1000000000 / bd->bi_tbfreq;
-}
-#endif /* CONFIG_IBM_OPENBIOS */
-
-#ifdef CONFIG_EP405
-#include <linux/serial_reg.h>
-
-void
-embed_config(bd_t **bdp)
-{
-	u32 chcr0;
-	u_char *cp;
-	bd_t	*bd;
-
-	/* Different versions of the PlanetCore firmware vary in how
-	   they set up the serial port - in particular whether they
-	   use the internal or external serial clock for UART0.  Make
-	   sure the UART is in a known state. */
-	/* FIXME: We should use the board's 11.0592MHz external serial
-	   clock - it will be more accurate for serial rates.  For
-	   now, however the baud rates in ep405.h are for the internal
-	   clock. */
-	chcr0 = mfdcr(DCRN_CHCR0);
-	if ( (chcr0 & 0x1fff) != 0x103e ) {
-		mtdcr(DCRN_CHCR0, (chcr0 & 0xffffe000) | 0x103e);
-		/* The following tricks serial_init() into resetting the baud rate */
-		writeb(0, UART0_IO_BASE + UART_LCR);
-	}
-
-	/* We haven't seen actual problems with the EP405 leaving the
-	 * EMAC running (as we have on Walnut).  But the registers
-	 * suggest it may not be left completely quiescent.  Reset it
-	 * just to be sure. */
-	mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);     /* 1st reset MAL */
-	while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {}; /* wait for the reset */	
-	out_be32((unsigned *)EMAC0_BASE,0x20000000);        /* then reset EMAC */
-
-	bd = &bdinfo;
-	*bdp = bd;
-#if 1
-	        cp = (u_char *)0xF0000EE0;
-	        for (;;) {
-	                if (*cp == 'E') {
-	                        cp++;
-	                        if (*cp == 'A') {
-                                  cp += 2;
-                                  rpx_eth(bd, cp);
-	                        }
-		         }
-
-	         	if (*cp == 'D') {
-	                        	cp++;
-	                        	if (*cp == '1') {
-		                                cp += 2;
-		                                rpx_memsize(bd, cp);
-	        	                }
-                	}
-
-			if (*cp == 'N') {
-				cp++;
-				if (*cp == 'V') {
-					cp += 2;
-					rpx_nvramsize(bd, cp);
-				}
-			}
-			while ((*cp != '\n') && (*cp != 0xff))
-			      cp++;
-
-	                cp++;
-	                if ((*cp == 0) || (*cp == 0xff))
-	                   break;
-	       }
-	bd->bi_intfreq   = 200000000;
-	bd->bi_busfreq   = 100000000;
-	bd->bi_pci_busfreq= 33000000 ;
-#else
-
-	bd->bi_memsize   = 64000000;
-	bd->bi_intfreq   = 200000000;
-	bd->bi_busfreq   = 100000000;
-	bd->bi_pci_busfreq= 33000000 ;
-#endif
-}
-#endif
diff --git a/arch/ppc/boot/simple/head.S b/arch/ppc/boot/simple/head.S
deleted file mode 100644
index 1b4d7b1d4ec1..000000000000
--- a/arch/ppc/boot/simple/head.S
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Initial board bringup code for many different boards.
- *
- * Author: Tom Rini
- *	   trini@mvista.com
- * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others).
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <asm/reg.h>
-#include <asm/cache.h>
-#include <asm/ppc_asm.h>
-
-	.text
-
-/*
- *      Begin at some arbitrary location in RAM or Flash
- *	  Initialize core registers
- *	  Configure memory controller (Not executing from RAM)
- *	Move the boot code to the link address (8M)
- *	  Setup C stack
- *	  Initialize UART
- *      Decompress the kernel to 0x0
- *      Jump to the kernel entry
- *
- */
-
-	.globl	start
-start:
-	bl	start_
-#ifdef CONFIG_IBM_OPENBIOS
-	/* The IBM "Tree" bootrom knows that the address of the bootrom
-	 * read only structure is 4 bytes after _start.
-	 */
-	.long	0x62726f6d		# structure ID - "brom"
-	.long	0x5f726f00		#              - "_ro\0"
-	.long	1			# structure version
-	.long	bootrom_cmdline		# address of *bootrom_cmdline
-#endif
-
-start_:
-#ifdef CONFIG_FORCE
-	/* We have some really bad firmware.  We must disable the L1
-	 * icache/dcache now or the board won't boot.
-	 */
-	li	r4,0x0000
-	isync
-	mtspr	SPRN_HID0,r4
-	sync
-	isync
-#endif
-
-#if defined(CONFIG_MBX) || defined(CONFIG_RPX8260) || defined(CONFIG_PPC_PREP)
-	mr	r29,r3	/* On the MBX860, r3 is the board info pointer.
-			 * On the RPXSUPER, r3 points to the NVRAM
-			 * configuration keys.
-			 * On PReP, r3 is the pointer to the residual data.
-			 */
-#endif
-
-#if defined(CONFIG_XILINX_VIRTEX_4_FX)
-	/* PPC errata 213: only for Virtex-4 FX */
-	mfccr0  0
-	oris    0,0,0x50000000@h
-	mtccr0  0
-#endif
-
-	mflr	r3	/* Save our actual starting address. */
-
-	/* The following functions we call must not modify r3 or r4.....
-	*/
-#ifdef CONFIG_6xx
-	/* On PReP we must look at the OpenFirmware pointer and sanity
-	 * test it.  On other platforms, we disable the MMU right now
-	 * and other bits.
-	 */
-#ifdef CONFIG_PPC_PREP
-/*
- * Save the OF pointer to r25, but only if the entry point is in a sane
- * location; if not we store 0.  If there is no entry point, or it is
- * invalid, we establish the default MSR value immediately.  Otherwise,
- * we defer doing that, to allow OF functions to be called, until we
- * begin uncompressing the kernel.
- */
-	lis	r8,0x0fff		/* r8 = 0x0fffffff */
-	ori	r8,r8,0xffff
-
-	subc	r8,r8,r5		/* r8 = (r5 <= r8) ? ~0 : 0 */
-	subfe	r8,r8,r8
-	nand	r8,r8,r8
-
-	and.	r5,r5,r8		/* r5 will be cleared if (r5 > r8) */
-	bne+	haveOF
-
-	li	r8,MSR_IP|MSR_FP	/* Not OF: set MSR immediately */
-  	mtmsr	r8
-	isync
-haveOF:
-	mr	r25,r5
-#else
-	bl	disable_6xx_mmu
-#endif
-	bl	disable_6xx_l1cache
-
-	CLEAR_CACHES
-#endif
-
-#ifdef CONFIG_8xx
-	mfmsr	r8		/* Turn off interrupts */
-	li	r9,0
-	ori	r9,r9,MSR_EE
-	andc	r8,r8,r9
-	mtmsr	r8
-
-	/* We do this because some boot roms don't initialize the
-	 * processor correctly. Don't do this if you want to debug
-	 * using a BDM device.
-	 */
-	li	r4,0		/* Zero DER to prevent FRZ */
-	mtspr	SPRN_DER,r4
-#endif
-
-#if defined(CONFIG_MBX) || defined(CONFIG_RPX8260) || defined(CONFIG_PPC_PREP)
-	mr	r4,r29	/* put the board info pointer where the relocate
-			 * routine will find it
-			 */
-#endif
-
-	/* Get the load address.
-	*/
-	subi	r3, r3, 4	/* Get the actual IP, not NIP */
-	b	relocate
-
diff --git a/arch/ppc/boot/simple/iic.c b/arch/ppc/boot/simple/iic.c
deleted file mode 100644
index 5e91489426b4..000000000000
--- a/arch/ppc/boot/simple/iic.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/* Minimal support functions to read configuration from IIC EEPROMS
- * on MPC8xx boards.  Originally written for RPGC RPX-Lite.
- * Dan Malek (dmalek@jlc.net).
- */
-#include <linux/types.h>
-#include <asm/uaccess.h>
-#include <asm/mpc8xx.h>
-#include <asm/cpm1.h>
-
-
-/* IIC functions.
- * These are just the basic master read/write operations so we can
- * examine serial EEPROM.
- */
-void	iic_read(uint devaddr, u_char *buf, uint offset, uint count);
-
-static	int	iic_init_done;
-
-static void
-iic_init(void)
-{
-	volatile iic_t *iip;
-	volatile i2c8xx_t *i2c;
-	volatile cpm8xx_t	*cp;
-	volatile immap_t	*immap;
-	uint	dpaddr;
-
-	immap = (immap_t *)IMAP_ADDR;
-	cp = (cpm8xx_t *)&(immap->im_cpm);
-
-	/* Reset the CPM.  This is necessary on the 860 processors
-	 * that may have started the SCC1 ethernet without relocating
-	 * the IIC.
-	 * This also stops the Ethernet in case we were loaded by a
-	 * BOOTP rom monitor.
-	 */
-	cp->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG);
-
-	/* Wait for it.
-	*/
-	while (cp->cp_cpcr & (CPM_CR_RST | CPM_CR_FLG));
-
-	/* Remove any microcode patches.  We will install our own
-	 * later.
-	 */
-	cp->cp_cpmcr1 = 0;
-	cp->cp_cpmcr2 = 0;
-	cp->cp_cpmcr3 = 0;
-	cp->cp_cpmcr4 = 0;
-	cp->cp_rccr = 0;
-
-	iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
-	i2c = (i2c8xx_t *)&(immap->im_i2c);
-
-	/* Initialize Port B IIC pins.
-	*/
-	cp->cp_pbpar |= 0x00000030;
-	cp->cp_pbdir |= 0x00000030;
-	cp->cp_pbodr |= 0x00000030;
-
-	/* Initialize the parameter ram.
-	*/
-
-	/* Allocate space for a two transmit and one receive buffer
-	 * descriptor in the DP ram.
-	 * For now, this address seems OK, but it may have to
-	 * change with newer versions of the firmware.
-	 */
-	dpaddr = 0x0840;
-
-	/* Set up the IIC parameters in the parameter ram.
-	*/
-	iip->iic_tbase = dpaddr;
-	iip->iic_rbase = dpaddr + (2 * sizeof(cbd_t));
-
-	iip->iic_tfcr = SMC_EB;
-	iip->iic_rfcr = SMC_EB;
-
-	/* This should really be done by the reader/writer.
-	*/
-	iip->iic_mrblr = 128;
-
-	/* Initialize Tx/Rx parameters.
-	*/
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_I2C, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* Select an arbitrary address.  Just make sure it is unique.
-	*/
-	i2c->i2c_i2add = 0x34;
-
-	/* Make clock run maximum slow.
-	*/
-	i2c->i2c_i2brg = 7;
-
-	/* Disable interrupts.
-	*/
-	i2c->i2c_i2cmr = 0;
-	i2c->i2c_i2cer = 0xff;
-
-	/* Enable SDMA.
-	*/
-	immap->im_siu_conf.sc_sdcr = 1;
-
-	iic_init_done = 1;
-}
-
-/* Read from IIC.
- * Caller provides device address, memory buffer, and byte count.
- */
-static	u_char	iitemp[32];
-
-void
-iic_read(uint devaddr, u_char *buf, uint offset, uint count)
-{
-	volatile iic_t		*iip;
-	volatile i2c8xx_t	*i2c;
-	volatile cbd_t		*tbdf, *rbdf;
-	volatile cpm8xx_t	*cp;
-	volatile immap_t	*immap;
-	u_char			*tb;
-	uint			temp;
-
-	/* If the interface has not been initialized, do that now.
-	*/
-	if (!iic_init_done)
-		iic_init();
-
-	immap = (immap_t *)IMAP_ADDR;
-	cp = (cpm8xx_t *)&(immap->im_cpm);
-
-	iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
-	i2c = (i2c8xx_t *)&(immap->im_i2c);
-
-	tbdf = (cbd_t *)&cp->cp_dpmem[iip->iic_tbase];
-	rbdf = (cbd_t *)&cp->cp_dpmem[iip->iic_rbase];
-
-	/* Send a "dummy write" operation.  This is a write request with
-	 * only the offset sent, followed by another start condition.
-	 * This will ensure we start reading from the first location
-	 * of the EEPROM.
-	 */
-	tb = iitemp;
-	tb = (u_char *)(((uint)tb + 15) & ~15);
-	tbdf->cbd_bufaddr = (int)tb;
-	*tb = devaddr & 0xfe;	/* Device address */
-	*(tb+1) = offset;		/* Offset */
-	tbdf->cbd_datlen = 2;		/* Length */
-	tbdf->cbd_sc =
-	      BD_SC_READY | BD_SC_LAST | BD_SC_WRAP | BD_IIC_START;
-
-	i2c->i2c_i2mod = 1;	/* Enable */
-	i2c->i2c_i2cer = 0xff;
-	i2c->i2c_i2com = 0x81;	/* Start master */
-
-	/* Wait for IIC transfer.
-	*/
-#if 0
-	while ((i2c->i2c_i2cer & 3) == 0);
-
-	if (tbdf->cbd_sc & BD_SC_READY)
-		printf("IIC ra complete but tbuf ready\n");
-#else
-	temp = 10000000;
-	while ((tbdf->cbd_sc & BD_SC_READY) && (temp != 0))
-		temp--;
-#if 0
-	/* We can't do this...there is no serial port yet!
-	*/
-	if (temp == 0) {
-		printf("Timeout reading EEPROM\n");
-		return;
-	}
-#endif
-#endif
-	
-	/* Chip errata, clear enable.
-	*/
-	i2c->i2c_i2mod = 0;
-
-	/* To read, we need an empty buffer of the proper length.
-	 * All that is used is the first byte for address, the remainder
-	 * is just used for timing (and doesn't really have to exist).
-	 */
-	tbdf->cbd_bufaddr = (int)tb;
-	*tb = devaddr | 1;	/* Device address */
-	rbdf->cbd_bufaddr = (uint)buf;		/* Desination buffer */
-	tbdf->cbd_datlen = rbdf->cbd_datlen = count + 1;	/* Length */
-	tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP | BD_IIC_START;
-	rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
-
-	/* Chip bug, set enable here.
-	*/
-	i2c->i2c_i2mod = 1;	/* Enable */
-	i2c->i2c_i2cer = 0xff;
-	i2c->i2c_i2com = 0x81;	/* Start master */
-
-	/* Wait for IIC transfer.
-	*/
-#if 0
-	while ((i2c->i2c_i2cer & 1) == 0);
-
-	if (rbdf->cbd_sc & BD_SC_EMPTY)
-		printf("IIC read complete but rbuf empty\n");
-#else
-	temp = 10000000;
-	while ((tbdf->cbd_sc & BD_SC_READY) && (temp != 0))
-		temp--;
-#endif
-	
-	/* Chip errata, clear enable.
-	*/
-	i2c->i2c_i2mod = 0;
-}
diff --git a/arch/ppc/boot/simple/m8260_tty.c b/arch/ppc/boot/simple/m8260_tty.c
deleted file mode 100644
index d770947e9b8f..000000000000
--- a/arch/ppc/boot/simple/m8260_tty.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/* Minimal serial functions needed to send messages out the serial
- * port on SMC1.
- */
-#include <linux/types.h>
-#include <asm/mpc8260.h>
-#include <asm/cpm2.h>
-#include <asm/immap_cpm2.h>
-
-uint	no_print;
-extern char	*params[];
-extern int	nparams;
-static		u_char	cons_hold[128], *sgptr;
-static		int	cons_hold_cnt;
-
-/* If defined, enables serial console.  The value (1 through 4)
- * should designate which SCC is used, but this isn't complete.  Only
- * SCC1 is known to work at this time.
- * We're only linked if SERIAL_CPM_CONSOLE=y, so we only need to test
- * SERIAL_CPM_SCC1.
- */
-#ifdef CONFIG_SERIAL_CPM_SCC1
-#define SCC_CONSOLE 1
-#endif
-
-unsigned long
-serial_init(int ignored, bd_t *bd)
-{
-#ifdef SCC_CONSOLE
-	volatile scc_t		*sccp;
-	volatile scc_uart_t	*sup;
-#else
-	volatile smc_t		*sp;
-	volatile smc_uart_t	*up;
-#endif
-	volatile cbd_t	*tbdf, *rbdf;
-	volatile cpm2_map_t	*ip;
-	volatile iop_cpm2_t	*io;
-	volatile cpm_cpm2_t	*cp;
-	uint	dpaddr, memaddr;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-	cp = &ip->im_cpm;
-	io = &ip->im_ioport;
-
-	/* Perform a reset.
-	*/
-	cp->cp_cpcr = (CPM_CR_RST | CPM_CR_FLG);
-
-	/* Wait for it.
-	*/
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-#ifdef CONFIG_ADS8260
-	/* Enable the RS-232 transceivers.
-	*/
-	*(volatile uint *)(BCSR_ADDR + 4) &=
-					~(BCSR1_RS232_EN1 | BCSR1_RS232_EN2);
-#endif
-
-#ifdef SCC_CONSOLE
-	sccp = (scc_t *)&(ip->im_scc[SCC_CONSOLE-1]);
-	sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)];
-	sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
-	sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-	/* Use Port D for SCC1 instead of other functions.
-	*/
-	io->iop_ppard |= 0x00000003;
-	io->iop_psord &= ~0x00000001;	/* Rx */
-	io->iop_psord |= 0x00000002;	/* Tx */
-	io->iop_pdird &= ~0x00000001;	/* Rx */
-	io->iop_pdird |= 0x00000002;	/* Tx */
-
-#else
-	sp = (smc_t*)&(ip->im_smc[0]);
-	*(ushort *)(&ip->im_dprambase[PROFF_SMC1_BASE]) = PROFF_SMC1;
-	up = (smc_uart_t *)&ip->im_dprambase[PROFF_SMC1];
-
-	/* Disable transmitter/receiver.
-	*/
-	sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
-	/* Use Port D for SMC1 instead of other functions.
-	*/
-	io->iop_ppard |= 0x00c00000;
-	io->iop_pdird |= 0x00400000;
-	io->iop_pdird &= ~0x00800000;
-	io->iop_psord &= ~0x00c00000;
-#endif
-
-	/* Allocate space for two buffer descriptors in the DP ram.
-	 * For now, this address seems OK, but it may have to
-	 * change with newer versions of the firmware.
-	 */
-	dpaddr = 0x0800;
-
-	/* Grab a few bytes from the top of memory.
-	 */
-	memaddr = (bd->bi_memsize - 256) & ~15;
-
-	/* Set the physical address of the host memory buffers in
-	 * the buffer descriptors.
-	 */
-	rbdf = (cbd_t *)&ip->im_dprambase[dpaddr];
-	rbdf->cbd_bufaddr = memaddr;
-	rbdf->cbd_sc = 0;
-	tbdf = rbdf + 1;
-	tbdf->cbd_bufaddr = memaddr+128;
-	tbdf->cbd_sc = 0;
-
-	/* Set up the uart parameters in the parameter ram.
-	*/
-#ifdef SCC_CONSOLE
-	sup->scc_genscc.scc_rbase = dpaddr;
-	sup->scc_genscc.scc_tbase = dpaddr + sizeof(cbd_t);
-
-	/* Set up the uart parameters in the
-	 * parameter ram.
-	 */
-	sup->scc_genscc.scc_rfcr = CPMFCR_GBL | CPMFCR_EB;
-	sup->scc_genscc.scc_tfcr = CPMFCR_GBL | CPMFCR_EB;
-
-	sup->scc_genscc.scc_mrblr = 128;
-	sup->scc_maxidl = 8;
-	sup->scc_brkcr = 1;
-	sup->scc_parec = 0;
-	sup->scc_frmec = 0;
-	sup->scc_nosec = 0;
-	sup->scc_brkec = 0;
-	sup->scc_uaddr1 = 0;
-	sup->scc_uaddr2 = 0;
-	sup->scc_toseq = 0;
-	sup->scc_char1 = 0x8000;
-	sup->scc_char2 = 0x8000;
-	sup->scc_char3 = 0x8000;
-	sup->scc_char4 = 0x8000;
-	sup->scc_char5 = 0x8000;
-	sup->scc_char6 = 0x8000;
-	sup->scc_char7 = 0x8000;
-	sup->scc_char8 = 0x8000;
-	sup->scc_rccm = 0xc0ff;
-
-	/* Send the CPM an initialize command.
-	*/
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_SCC1_PAGE, CPM_CR_SCC1_SBLOCK, 0,
-			CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* Set UART mode, 8 bit, no parity, one stop.
-	 * Enable receive and transmit.
-	 */
-	sccp->scc_gsmrh = 0;
-	sccp->scc_gsmrl =
-		(SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
-
-	/* Disable all interrupts and clear all pending
-	 * events.
-	 */
-	sccp->scc_sccm = 0;
-	sccp->scc_scce = 0xffff;
-	sccp->scc_dsr = 0x7e7e;
-	sccp->scc_psmr = 0x3000;
-
-	/* Wire BRG1 to SCC1.  The console driver will take care of
-	 * others.
-	 */
-	ip->im_cpmux.cmx_scr = 0;
-#else
-	up->smc_rbase = dpaddr;
-	up->smc_tbase = dpaddr+sizeof(cbd_t);
-	up->smc_rfcr = CPMFCR_EB;
-	up->smc_tfcr = CPMFCR_EB;
-	up->smc_brklen = 0;
-	up->smc_brkec = 0;
-	up->smc_brkcr = 0;
-	up->smc_mrblr = 128;
-	up->smc_maxidl = 8;
-
-	/* Set UART mode, 8 bit, no parity, one stop.
-	 * Enable receive and transmit.
-	 */
-	sp->smc_smcmr = smcr_mk_clen(9) |  SMCMR_SM_UART;
-
-	/* Mask all interrupts and remove anything pending.
-	*/
-	sp->smc_smcm = 0;
-	sp->smc_smce = 0xff;
-
-	/* Set up the baud rate generator.
-	 */
-	ip->im_cpmux.cmx_smr = 0;
-#endif
-
-	/* The baud rate divisor needs to be coordinated with clk_8260().
-	*/
-	ip->im_brgc1 =
-		(((bd->bi_brgfreq/16) / bd->bi_baudrate) << 1) |
-								CPM_BRG_EN;
-
-	/* Make the first buffer the only buffer.
-	*/
-	tbdf->cbd_sc |= BD_SC_WRAP;
-	rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
-	/* Initialize Tx/Rx parameters.
-	*/
-#ifdef SCC_CONSOLE
-	sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-#else
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_SMC1_PAGE, CPM_CR_SMC1_SBLOCK, 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* Enable transmitter/receiver.
-	*/
-	sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-#endif
-
-	/* This is ignored.
-	*/
-	return 0;
-}
-
-int
-serial_readbuf(u_char *cbuf)
-{
-	volatile cbd_t		*rbdf;
-	volatile char		*buf;
-#ifdef SCC_CONSOLE
-	volatile scc_uart_t	*sup;
-#else
-	volatile smc_uart_t	*up;
-#endif
-	volatile cpm2_map_t	*ip;
-	int	i, nc;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-
-#ifdef SCC_CONSOLE
-	sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)];
-	rbdf = (cbd_t *)&ip->im_dprambase[sup->scc_genscc.scc_rbase];
-#else
-	up = (smc_uart_t *)&(ip->im_dprambase[PROFF_SMC1]);
-	rbdf = (cbd_t *)&ip->im_dprambase[up->smc_rbase];
-#endif
-
-	/* Wait for character to show up.
-	*/
-	buf = (char *)rbdf->cbd_bufaddr;
-	while (rbdf->cbd_sc & BD_SC_EMPTY);
-	nc = rbdf->cbd_datlen;
-	for (i=0; i<nc; i++)
-		*cbuf++ = *buf++;
-	rbdf->cbd_sc |= BD_SC_EMPTY;
-
-	return(nc);
-}
-
-void
-serial_putc(void *ignored, const char c)
-{
-	volatile cbd_t		*tbdf;
-	volatile char		*buf;
-#ifdef SCC_CONSOLE
-	volatile scc_uart_t	*sup;
-#else
-	volatile smc_uart_t	*up;
-#endif
-	volatile cpm2_map_t	*ip;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-#ifdef SCC_CONSOLE
-	sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)];
-	tbdf = (cbd_t *)&ip->im_dprambase[sup->scc_genscc.scc_tbase];
-#else
-	up = (smc_uart_t *)&(ip->im_dprambase[PROFF_SMC1]);
-	tbdf = (cbd_t *)&ip->im_dprambase[up->smc_tbase];
-#endif
-
-	/* Wait for last character to go.
-	*/
-	buf = (char *)tbdf->cbd_bufaddr;
-	while (tbdf->cbd_sc & BD_SC_READY);
-
-	*buf = c;
-	tbdf->cbd_datlen = 1;
-	tbdf->cbd_sc |= BD_SC_READY;
-}
-
-char
-serial_getc(void *ignored)
-{
-	char	c;
-
-	if (cons_hold_cnt <= 0) {
-		cons_hold_cnt = serial_readbuf(cons_hold);
-		sgptr = cons_hold;
-	}
-	c = *sgptr++;
-	cons_hold_cnt--;
-
-	return(c);
-}
-
-int
-serial_tstc(void *ignored)
-{
-	volatile cbd_t		*rbdf;
-#ifdef SCC_CONSOLE
-	volatile scc_uart_t	*sup;
-#else
-	volatile smc_uart_t	*up;
-#endif
-	volatile cpm2_map_t	*ip;
-
-	ip = (cpm2_map_t *)CPM_MAP_ADDR;
-#ifdef SCC_CONSOLE
-	sup = (scc_uart_t *)&ip->im_dprambase[PROFF_SCC1 + ((SCC_CONSOLE-1) << 8)];
-	rbdf = (cbd_t *)&ip->im_dprambase[sup->scc_genscc.scc_rbase];
-#else
-	up = (smc_uart_t *)&(ip->im_dprambase[PROFF_SMC1]);
-	rbdf = (cbd_t *)&ip->im_dprambase[up->smc_rbase];
-#endif
-
-	return(!(rbdf->cbd_sc & BD_SC_EMPTY));
-}
diff --git a/arch/ppc/boot/simple/m8xx_tty.c b/arch/ppc/boot/simple/m8xx_tty.c
deleted file mode 100644
index f28924e6aeb4..000000000000
--- a/arch/ppc/boot/simple/m8xx_tty.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/* Minimal serial functions needed to send messages out the serial
- * port on the MBX console.
- *
- * The MBX uses SMC1 for the serial port.  We reset the port and use
- * only the first BD that EPPC-Bug set up as a character FIFO.
- *
- * Later versions (at least 1.4, maybe earlier) of the MBX EPPC-Bug
- * use COM1 instead of SMC1 as the console port.  This kinda sucks
- * for the rest of the kernel, so here we force the use of SMC1 again.
- */
-#include <linux/types.h>
-#include <asm/uaccess.h>
-#include <asm/mpc8xx.h>
-#include <asm/cpm1.h>
-
-#ifdef CONFIG_MBX
-#define MBX_CSR1	((volatile u_char *)0xfa100000)
-#define CSR1_COMEN	(u_char)0x02
-#endif
-
-#ifdef TQM_SMC2_CONSOLE
-#define PROFF_CONS	PROFF_SMC2
-#define CPM_CR_CH_CONS	CPM_CR_CH_SMC2
-#define SMC_INDEX	1
-static volatile iop8xx_t *iopp = (iop8xx_t *)&(((immap_t *)IMAP_ADDR)->im_ioport);
-#else
-#define PROFF_CONS	PROFF_SMC1
-#define CPM_CR_CH_CONS	CPM_CR_CH_SMC1
-#define SMC_INDEX	0
-#endif
-
-static cpm8xx_t	*cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
-
-unsigned long
-serial_init(int ignored, bd_t *bd)
-{
-	volatile smc_t		*sp;
-	volatile smc_uart_t	*up;
-	volatile cbd_t	*tbdf, *rbdf;
-	volatile cpm8xx_t	*cp;
-	uint	dpaddr, memaddr;
-#ifndef CONFIG_MBX
-	uint	ui;
-#endif
-
-	cp = cpmp;
-	sp = (smc_t*)&(cp->cp_smc[SMC_INDEX]);
-	up = (smc_uart_t *)&cp->cp_dparam[PROFF_CONS];
-
-	/* Disable transmitter/receiver.
-	*/
-	sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
-#ifdef CONFIG_FADS
-	/* Enable SMC1/2 transceivers.
-	*/
-	*((volatile uint *)BCSR1) &= ~(BCSR1_RS232EN_1|BCSR1_RS232EN_2);
-#endif
-
-#ifndef CONFIG_MBX
-	{
-	/* Initialize SMCx and use it for the console port.
-	 */
-
-	/* Enable SDMA.
-	*/
-	((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sdcr = 1;
-
-#ifdef TQM_SMC2_CONSOLE
-	/* Use Port A for SMC2 instead of other functions.
-	*/
-	iopp->iop_papar |=  0x00c0;
-	iopp->iop_padir &= ~0x00c0;
-	iopp->iop_paodr &= ~0x00c0;
-#else
-	/* Use Port B for SMCs instead of other functions.
-	*/
-	cp->cp_pbpar |= 0x00000cc0;
-	cp->cp_pbdir &= ~0x00000cc0;
-	cp->cp_pbodr &= ~0x00000cc0;
-#endif
-
-	/* Allocate space for two buffer descriptors in the DP ram.
-	 * For now, this address seems OK, but it may have to
-	 * change with newer versions of the firmware.
-	 */
-	dpaddr = 0x0800;
-
-	/* Grab a few bytes from the top of memory for SMC FIFOs.
-	 */
-	memaddr = (bd->bi_memsize - 32) & ~15;
-
-	/* Set the physical address of the host memory buffers in
-	 * the buffer descriptors.
-	 */
-	rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
-	rbdf->cbd_bufaddr = memaddr;
-	rbdf->cbd_sc = 0;
-	tbdf = rbdf + 1;
-	tbdf->cbd_bufaddr = memaddr+4;
-	tbdf->cbd_sc = 0;
-
-	/* Set up the uart parameters in the parameter ram.
-	*/
-	up->smc_rbase = dpaddr;
-	up->smc_tbase = dpaddr+sizeof(cbd_t);
-	up->smc_rfcr = SMC_EB;
-	up->smc_tfcr = SMC_EB;
-
-	/* Set UART mode, 8 bit, no parity, one stop.
-	 * Enable receive and transmit.
-	 */
-	sp->smc_smcmr = smcr_mk_clen(9) |  SMCMR_SM_UART;
-
-	/* Mask all interrupts and remove anything pending.
-	*/
-	sp->smc_smcm = 0;
-	sp->smc_smce = 0xff;
-
-	/* Set up the baud rate generator.
-	 * See 8xx_io/commproc.c for details.
-	 * This wires BRG1 to SMC1 and BRG2 to SMC2;
-	 */
-	cp->cp_simode = 0x10000000;
-	ui = bd->bi_intfreq / 16 / bd->bi_baudrate;
-#ifdef TQM_SMC2_CONSOLE
-	cp->cp_brgc2 =
-#else
-	cp->cp_brgc1 =
-#endif
-		((ui - 1) < 4096)
-		? (((ui - 1) << 1) | CPM_BRG_EN)
-		: ((((ui / 16) - 1) << 1) | CPM_BRG_EN | CPM_BRG_DIV16);
-
-#else /* CONFIG_MBX */
-	if (*MBX_CSR1 & CSR1_COMEN) {
-		/* COM1 is enabled.  Initialize SMC1 and use it for
-		 * the console port.
-		 */
-
-		/* Enable SDMA.
-		*/
-		((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sdcr = 1;
-
-		/* Use Port B for SMCs instead of other functions.
-		*/
-		cp->cp_pbpar |= 0x00000cc0;
-		cp->cp_pbdir &= ~0x00000cc0;
-		cp->cp_pbodr &= ~0x00000cc0;
-
-		/* Allocate space for two buffer descriptors in the DP ram.
-		 * For now, this address seems OK, but it may have to
-		 * change with newer versions of the firmware.
-		 */
-		dpaddr = 0x0800;
-
-		/* Grab a few bytes from the top of memory.  EPPC-Bug isn't
-		 * running any more, so we can do this.
-		 */
-		memaddr = (bd->bi_memsize - 32) & ~15;
-
-		/* Set the physical address of the host memory buffers in
-		 * the buffer descriptors.
-		 */
-		rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
-		rbdf->cbd_bufaddr = memaddr;
-		rbdf->cbd_sc = 0;
-		tbdf = rbdf + 1;
-		tbdf->cbd_bufaddr = memaddr+4;
-		tbdf->cbd_sc = 0;
-
-		/* Set up the uart parameters in the parameter ram.
-		*/
-		up->smc_rbase = dpaddr;
-		up->smc_tbase = dpaddr+sizeof(cbd_t);
-		up->smc_rfcr = SMC_EB;
-		up->smc_tfcr = SMC_EB;
-
-		/* Set UART mode, 8 bit, no parity, one stop.
-		 * Enable receive and transmit.
-		 */
-		sp->smc_smcmr = smcr_mk_clen(9) |  SMCMR_SM_UART;
-
-		/* Mask all interrupts and remove anything pending.
-		*/
-		sp->smc_smcm = 0;
-		sp->smc_smce = 0xff;
-
-		/* Set up the baud rate generator.
-		 * See 8xx_io/commproc.c for details.
-		 */
-		cp->cp_simode = 0x10000000;
-		cp->cp_brgc1 =
-			(((bd->bi_intfreq/16) / 9600) << 1) | CPM_BRG_EN;
-
-		/* Enable SMC1 for console output.
-		*/
-		*MBX_CSR1 &= ~CSR1_COMEN;
-	}
-	else {
-#endif /* ndef CONFIG_MBX */
-		/* SMCx is used as console port.
-		*/
-		tbdf = (cbd_t *)&cp->cp_dpmem[up->smc_tbase];
-		rbdf = (cbd_t *)&cp->cp_dpmem[up->smc_rbase];
-
-		/* Issue a stop transmit, and wait for it.
-		*/
-		cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_CONS,
-					CPM_CR_STOP_TX) | CPM_CR_FLG;
-		while (cp->cp_cpcr & CPM_CR_FLG);
-	}
-
-	/* Make the first buffer the only buffer.
-	*/
-	tbdf->cbd_sc |= BD_SC_WRAP;
-	rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
-	/* Single character receive.
-	*/
-	up->smc_mrblr = 1;
-	up->smc_maxidl = 0;
-
-	/* Initialize Tx/Rx parameters.
-	*/
-	cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_CONS, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-	while (cp->cp_cpcr & CPM_CR_FLG);
-
-	/* Enable transmitter/receiver.
-	*/
-	sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-
-	/* This is ignored.
-	*/
-	return 0;
-}
-
-void
-serial_putc(void *ignored, const char c)
-{
-	volatile cbd_t		*tbdf;
-	volatile char		*buf;
-	volatile smc_uart_t	*up;
-
-	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS];
-	tbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_tbase];
-
-	/* Wait for last character to go.
-	*/
-	buf = (char *)tbdf->cbd_bufaddr;
-	while (tbdf->cbd_sc & BD_SC_READY);
-
-	*buf = c;
-	tbdf->cbd_datlen = 1;
-	tbdf->cbd_sc |= BD_SC_READY;
-}
-
-char
-serial_getc(void *ignored)
-{
-	volatile cbd_t		*rbdf;
-	volatile char		*buf;
-	volatile smc_uart_t	*up;
-	char			c;
-
-	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS];
-	rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
-	/* Wait for character to show up.
-	*/
-	buf = (char *)rbdf->cbd_bufaddr;
-	while (rbdf->cbd_sc & BD_SC_EMPTY);
-	c = *buf;
-	rbdf->cbd_sc |= BD_SC_EMPTY;
-
-	return(c);
-}
-
-int
-serial_tstc(void *ignored)
-{
-	volatile cbd_t		*rbdf;
-	volatile smc_uart_t	*up;
-
-	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_CONS];
-	rbdf = (cbd_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
-	return(!(rbdf->cbd_sc & BD_SC_EMPTY));
-}
diff --git a/arch/ppc/boot/simple/misc-chestnut.c b/arch/ppc/boot/simple/misc-chestnut.c
deleted file mode 100644
index 14a4b56d4f84..000000000000
--- a/arch/ppc/boot/simple/misc-chestnut.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Setup for the IBM Chestnut (ibm-750fxgx_eval)
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-#include <platforms/chestnut.h>
-
-/* Not in the kernel so won't include kernel.h to get its 'max' definition */
-#define max(a,b)	(((a) > (b)) ? (a) : (b))
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	/*
-	 * Change device bus 2 window so that bootoader can do I/O thru
-	 * 8250/16550 UART that's mapped in that window.
-	 */
-	out_le32(new_base + MV64x60_CPU2DEV_2_BASE, CHESTNUT_UART_BASE >> 16);
-	out_le32(new_base + MV64x60_CPU2DEV_2_SIZE, CHESTNUT_UART_SIZE >> 16);
-	__asm__ __volatile__("sync");
-#endif
-}
diff --git a/arch/ppc/boot/simple/misc-cpci690.c b/arch/ppc/boot/simple/misc-cpci690.c
deleted file mode 100644
index 8a8614d11a32..000000000000
--- a/arch/ppc/boot/simple/misc-cpci690.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Add birec data for Force CPCI690 board.
- *
- * Author: Mark A. Greer <source@mvista.com>
- *
- * 2003 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <platforms/cpci690.h>
-
-#define	KB	(1024UL)
-#define	MB	(1024UL*KB)
-#define	GB	(1024UL*MB)
-
-extern u32 mv64x60_console_baud;
-extern u32 mv64x60_mpsc_clk_src;
-extern u32 mv64x60_mpsc_clk_freq;
-
-u32 mag = 0xffff;
-
-unsigned long
-get_mem_size(void)
-{
-	u32	size;
-
-	switch (in_8(((void __iomem *)CPCI690_BR_BASE + CPCI690_BR_MEM_CTLR))
-			& 0x07) {
-	case 0x01:
-		size = 256*MB;
-		break;
-	case 0x02:
-		size = 512*MB;
-		break;
-	case 0x03:
-		size = 768*MB;
-		break;
-	case 0x04:
-		size = 1*GB;
-		break;
-	case 0x05:
-		size = 1*GB + 512*MB;
-		break;
-	case 0x06:
-		size = 2*GB;
-		break;
-	default:
-		size = 0;
-	}
-
-	return size;
-}
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-	mv64x60_console_baud = CPCI690_MPSC_BAUD;
-	mv64x60_mpsc_clk_src = CPCI690_MPSC_CLK_SRC;
-	mv64x60_mpsc_clk_freq =
-		(get_mem_size() >= (1*GB)) ? 100000000 : 133333333;
-}
diff --git a/arch/ppc/boot/simple/misc-embedded.c b/arch/ppc/boot/simple/misc-embedded.c
deleted file mode 100644
index d5a00eb0e4eb..000000000000
--- a/arch/ppc/boot/simple/misc-embedded.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * Originally adapted by Gary Thomas.  Much additional work by
- * Cort Dougan <cort@fsmlabs.com>.  On top of that still more work by
- * Dan Malek <dmalek@jlc.net>.
- *
- * Currently maintained by: Tom Rini <trini@kernel.crashing.org>
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/bootinfo.h>
-#include <asm/mmu.h>
-#include <asm/page.h>
-#include <asm/residual.h>
-#if defined(CONFIG_4xx)
-#include <asm/ibm4xx.h>
-#elif defined(CONFIG_8xx)
-#include <asm/mpc8xx.h>
-#elif defined(CONFIG_8260)
-#include <asm/mpc8260.h>
-#endif
-
-#include "nonstdio.h"
-
-/* The linker tells us where the image is. */
-extern char __image_begin, __image_end;
-extern char __ramdisk_begin, __ramdisk_end;
-extern char _end[];
-
-/* Because of the limited amount of memory on embedded, it presents
- * loading problems.  The biggest is that we load this boot program
- * into a relatively low memory address, and the Linux kernel Bss often
- * extends into this space when it get loaded.  When the kernel starts
- * and zeros the BSS space, it also writes over the information we
- * save here and pass to the kernel (usually board info).
- * On these boards, we grab some known memory holes to hold this information.
- */
-char cmd_buf[256];
-char *cmd_line = cmd_buf;
-char *avail_ram;
-char *end_avail;
-char *zimage_start;
-
-/* This is for 4xx treeboot.  It provides a place for the bootrom
- * give us a pointer to a rom environment command line.
- */
-char *bootrom_cmdline = "";
-
-/* This is the default cmdline that will be given to the user at boot time..
- * If none was specified at compile time, we'll give it one that should work.
- * -- Tom */
-#ifdef CONFIG_CMDLINE_BOOL
-char compiled_string[] = CONFIG_CMDLINE;
-#endif
-char ramroot_string[] = "root=/dev/ram";
-char netroot_string[] = "root=/dev/nfs rw ip=on";
-
-/* Serial port to use. */
-unsigned long com_port;
-
-/* We need to make sure that this is before the images to ensure
- * that it's in a mapped location. - Tom */
-bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));
-bd_t *hold_residual = &hold_resid_buf;
-
-extern unsigned long serial_init(int chan, bd_t *bp);
-extern void serial_close(unsigned long com_port);
-extern unsigned long start;
-extern void flush_instruction_cache(void);
-extern void gunzip(void *, int, unsigned char *, int *);
-extern void embed_config(bd_t **bp);
-
-/* Weak function for boards which don't need to build the
- * board info struct because they are using PPCBoot/U-Boot.
- */
-void __attribute__ ((weak))
-embed_config(bd_t **bdp)
-{
-}
-
-unsigned long
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum, bd_t *bp)
-{
-	char *cp, ch;
-	int timer = 0, zimage_size;
-	unsigned long initrd_size;
-
-	/* First, capture the embedded board information.  Then
-	 * initialize the serial console port.
-	 */
-	embed_config(&bp);
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || \
-    defined(CONFIG_SERIAL_8250_CONSOLE) || \
-    defined(CONFIG_SERIAL_UARTLITE_CONSOLE)
-	com_port = serial_init(0, bp);
-#endif
-
-	/* Grab some space for the command line and board info.  Since
-	 * we no longer use the ELF header, but it was loaded, grab
-	 * that space.
-	 */
-#ifdef CONFIG_MBX
-	/* Because of the way the MBX loads the ELF image, we can't
-	 * tell where we started.  We read a magic variable from the NVRAM
-	 * that gives us the intermediate buffer load address.
-	 */
-	load_addr = *(uint *)0xfa000020;
-	load_addr += 0x10000;		/* Skip ELF header */
-#endif
-	/* copy board data */
-	if (bp)
-		memcpy(hold_residual,bp,sizeof(bd_t));
-
-	/* Set end of memory available to us.  It is always the highest
-	 * memory address provided by the board information.
-	 */
-	end_avail = (char *)(bp->bi_memsize);
-
-	puts("\nloaded at:     "); puthex(load_addr);
-	puts(" "); puthex((unsigned long)(load_addr + (4*num_words))); puts("\n");
-	if ( (unsigned long)load_addr != (unsigned long)&start ) {
-		puts("relocated to:  "); puthex((unsigned long)&start);
-		puts(" ");
-		puthex((unsigned long)((unsigned long)&start + (4*num_words)));
-		puts("\n");
-	}
-
-	if ( bp ) {
-		puts("board data at: "); puthex((unsigned long)bp);
-		puts(" ");
-		puthex((unsigned long)((unsigned long)bp + sizeof(bd_t)));
-		puts("\nrelocated to:  ");
-		puthex((unsigned long)hold_residual);
-		puts(" ");
-		puthex((unsigned long)((unsigned long)hold_residual + sizeof(bd_t)));
-		puts("\n");
-	}
-
-	/*
-	 * We link ourself to an arbitrary low address.  When we run, we
-	 * relocate ourself to that address.  __image_being points to
-	 * the part of the image where the zImage is. -- Tom
-	 */
-	zimage_start = (char *)(unsigned long)(&__image_begin);
-	zimage_size = (unsigned long)(&__image_end) -
-			(unsigned long)(&__image_begin);
-
-	initrd_size = (unsigned long)(&__ramdisk_end) -
-		(unsigned long)(&__ramdisk_begin);
-
-	/*
-	 * The zImage and initrd will be between start and _end, so they've
-	 * already been moved once.  We're good to go now. -- Tom
-	 */
-	puts("zimage at:     "); puthex((unsigned long)zimage_start);
-	puts(" "); puthex((unsigned long)(zimage_size+zimage_start));
-	puts("\n");
-
-	if ( initrd_size ) {
-		puts("initrd at:     ");
-		puthex((unsigned long)(&__ramdisk_begin));
-		puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");
-	}
-
-	/*
-	 * setup avail_ram - this is the first part of ram usable
-	 * by the uncompress code.  Anything after this program in RAM
-	 * is now fair game. -- Tom
-	 */
-	avail_ram = (char *)PAGE_ALIGN((unsigned long)_end);
-
-	puts("avail ram:     "); puthex((unsigned long)avail_ram); puts(" ");
-	puthex((unsigned long)end_avail); puts("\n");
-	puts("\nLinux/PPC load: ");
-	cp = cmd_line;
-	/* This is where we try and pick the right command line for booting.
-	 * If we were given one at compile time, use it.  It Is Right.
-	 * If we weren't, see if we have a ramdisk.  If so, thats root.
-	 * When in doubt, give them the netroot (root=/dev/nfs rw) -- Tom
-	 */
-#ifdef CONFIG_CMDLINE_BOOL
-	memcpy (cmd_line, compiled_string, sizeof(compiled_string));
-#else
-	if ( initrd_size )
-		memcpy (cmd_line, ramroot_string, sizeof(ramroot_string));
-	else
-		memcpy (cmd_line, netroot_string, sizeof(netroot_string));
-#endif
-	while ( *cp )
-		putc(*cp++);
-	while (timer++ < 5*1000) {
-		if (tstc()) {
-			while ((ch = getc()) != '\n' && ch != '\r') {
-				if (ch == '\b' || ch == '\177') {
-					if (cp != cmd_line) {
-						cp--;
-						puts("\b \b");
-					}
-				} else if (ch == '\030'		/* ^x */
-					   || ch == '\025') {	/* ^u */
-					while (cp != cmd_line) {
-						cp--;
-						puts("\b \b");
-					}
-				} else {
-					*cp++ = ch;
-					putc(ch);
-				}
-			}
-			break;  /* Exit 'timer' loop */
-		}
-		udelay(1000);  /* 1 msec */
-	}
-	*cp = 0;
-	puts("\nUncompressing Linux...");
-
-	gunzip(0, 0x400000, zimage_start, &zimage_size);
-	flush_instruction_cache();
-	puts("done.\n");
-	{
-		struct bi_record *rec;
-		unsigned long initrd_loc = 0;
-		unsigned long rec_loc = _ALIGN((unsigned long)(zimage_size) +
-				(1 << 20) - 1, (1 << 20));
-		rec = (struct bi_record *)rec_loc;
-
-		/* We need to make sure that the initrd and bi_recs do not
-		 * overlap. */
-		if ( initrd_size ) {
-			initrd_loc = (unsigned long)(&__ramdisk_begin);
-			/* If the bi_recs are in the middle of the current
-			 * initrd, move the initrd to the next MB
-			 * boundary. */
-			if ((rec_loc > initrd_loc) &&
-					((initrd_loc + initrd_size)
-					 > rec_loc)) {
-				initrd_loc = _ALIGN((unsigned long)(zimage_size)
-						+ (2 << 20) - 1, (2 << 20));
-			 	memmove((void *)initrd_loc, &__ramdisk_begin,
-					 initrd_size);
-		         	puts("initrd moved:  "); puthex(initrd_loc);
-			 	puts(" "); puthex(initrd_loc + initrd_size);
-			 	puts("\n");
-			}
-		}
-
-		rec->tag = BI_FIRST;
-		rec->size = sizeof(struct bi_record);
-		rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
-		rec->tag = BI_CMD_LINE;
-		memcpy( (char *)rec->data, cmd_line, strlen(cmd_line)+1);
-		rec->size = sizeof(struct bi_record) + strlen(cmd_line) + 1;
-		rec = (struct bi_record *)((unsigned long)rec + rec->size);
-
-		if ( initrd_size ) {
-			rec->tag = BI_INITRD;
-			rec->data[0] = initrd_loc;
-			rec->data[1] = initrd_size;
-			rec->size = sizeof(struct bi_record) + 2 *
-				sizeof(unsigned long);
-			rec = (struct bi_record *)((unsigned long)rec +
-					rec->size);
-		}
-
-		rec->tag = BI_LAST;
-		rec->size = sizeof(struct bi_record);
-		rec = (struct bi_record *)((unsigned long)rec + rec->size);
-	}
-	puts("Now booting the kernel\n");
-#if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE)
-	serial_close(com_port);
-#endif
-
-	return (unsigned long)hold_residual;
-}
diff --git a/arch/ppc/boot/simple/misc-ev64260.c b/arch/ppc/boot/simple/misc-ev64260.c
deleted file mode 100644
index 0b3978632aca..000000000000
--- a/arch/ppc/boot/simple/misc-ev64260.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Host bridge init code for the Marvell/Galileo EV-64260-BP evaluation board
- * with a GT64260 onboard.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <asm/reg.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-#include <platforms/ev64260.h>
-
-#ifdef CONFIG_SERIAL_MPSC_CONSOLE
-extern u32 mv64x60_console_baud;
-extern u32 mv64x60_mpsc_clk_src;
-extern u32 mv64x60_mpsc_clk_freq;
-#endif
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-	u32	p, v;
-
-	/* DINK doesn't enable 745x timebase, so enable here (Adrian Cox) */
-	p = mfspr(SPRN_PVR);
-	p >>= 16;
-
-	/* Reasonable SWAG at a 745x PVR value */
-	if (((p & 0xfff0) == 0x8000) && (p != 0x800c)) {
-		v = mfspr(SPRN_HID0);
-		v |= HID0_TBEN;
-		mtspr(SPRN_HID0, v);
-	}
-
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-	/*
-	 * Change device bus 2 window so that bootoader can do I/O thru
-	 * 8250/16550 UART that's mapped in that window.
-	 */
-	out_le32(new_base + MV64x60_CPU2DEV_2_BASE, EV64260_UART_BASE >> 20);
-	out_le32(new_base + MV64x60_CPU2DEV_2_SIZE, EV64260_UART_END >> 20);
-	__asm__ __volatile__("sync");
-#elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	mv64x60_console_baud = EV64260_DEFAULT_BAUD;
-	mv64x60_mpsc_clk_src = EV64260_MPSC_CLK_SRC;
-	mv64x60_mpsc_clk_freq = EV64260_MPSC_CLK_FREQ;
-#endif
-}
diff --git a/arch/ppc/boot/simple/misc-ev64360.c b/arch/ppc/boot/simple/misc-ev64360.c
deleted file mode 100644
index 96eaebb78df5..000000000000
--- a/arch/ppc/boot/simple/misc-ev64360.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2005 Lee Nicks <allinux@gmail.com>
- *
- * Based on arch/ppc/boot/simple/misc-katana.c from:
- * Mark A. Greer <source@mvista.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-#include <platforms/ev64360.h>
-
-extern u32 mv64x60_console_baud;
-extern u32 mv64x60_mpsc_clk_src;
-extern u32 mv64x60_mpsc_clk_freq;
-
-/* Not in the kernel so won't include kernel.h to get its 'min' definition */
-#ifndef min
-#define	min(a,b)	(((a) < (b)) ? (a) : (b))
-#endif
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-	mv64x60_console_baud  = EV64360_DEFAULT_BAUD;
-	mv64x60_mpsc_clk_src  = EV64360_MPSC_CLK_SRC;
-	mv64x60_mpsc_clk_freq = EV64360_MPSC_CLK_FREQ;
-}
diff --git a/arch/ppc/boot/simple/misc-katana.c b/arch/ppc/boot/simple/misc-katana.c
deleted file mode 100644
index 79a1bbcbc6c5..000000000000
--- a/arch/ppc/boot/simple/misc-katana.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Set up MPSC values to bootwrapper can prompt user.
- *
- * Author: Mark A. Greer <source@mvista.com>
- *
- * 2004 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-#include <platforms/katana.h>
-
-extern u32 mv64x60_console_baud;
-extern u32 mv64x60_mpsc_clk_src;
-extern u32 mv64x60_mpsc_clk_freq;
-
-/* Not in the kernel so won't include kernel.h to get its 'min' definition */
-#ifndef min
-#define	min(a,b)	(((a) < (b)) ? (a) : (b))
-#endif
-
-unsigned long mv64360_get_mem_size(void);
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-	mv64x60_console_baud = KATANA_DEFAULT_BAUD;
-	mv64x60_mpsc_clk_src = KATANA_MPSC_CLK_SRC;
-	mv64x60_mpsc_clk_freq =
-		min(katana_bus_freq((void __iomem *)KATANA_CPLD_BASE),
-			MV64x60_TCLK_FREQ_MAX);
-}
-
-unsigned long
-get_mem_size(void)
-{
-	return mv64360_get_mem_size();
-}
diff --git a/arch/ppc/boot/simple/misc-mv64x60.c b/arch/ppc/boot/simple/misc-mv64x60.c
deleted file mode 100644
index 28b3108083ed..000000000000
--- a/arch/ppc/boot/simple/misc-mv64x60.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Relocate bridge's register base and call board specific routine.
- *
- * Author: Mark A. Greer <source@mvista.com>
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-
-extern struct bi_record *decompress_kernel(unsigned long load_addr,
-	int num_words, unsigned long cksum);
-
-
-u32 size_reg[MV64x60_CPU2MEM_WINDOWS] = {
-	MV64x60_CPU2MEM_0_SIZE, MV64x60_CPU2MEM_1_SIZE,
-	MV64x60_CPU2MEM_2_SIZE, MV64x60_CPU2MEM_3_SIZE
-};
-
-/* Read mem ctlr to get the amount of mem in system */
-unsigned long
-mv64360_get_mem_size(void)
-{
-	u32	enables, i, v;
-	u32	mem = 0;
-
-	enables = in_le32((void __iomem *)CONFIG_MV64X60_NEW_BASE +
-		MV64360_CPU_BAR_ENABLE) & 0xf;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++)
-		if (!(enables & (1<<i))) {
-			v = in_le32((void __iomem *)CONFIG_MV64X60_NEW_BASE
-				+ size_reg[i]) & 0xffff;
-			v = (v + 1) << 16;
-			mem += v;
-		}
-
-	return mem;
-}
-
-void
-mv64x60_move_base(void __iomem *old_base, void __iomem *new_base)
-{
-	u32	bits, mask, b;
-
-	if (old_base != new_base) {
-#ifdef CONFIG_GT64260
-		bits = 12;
-		mask = 0x07000000;
-#else /* Must be mv64[34]60 */
-		bits = 16;
-		mask = 0x03000000;
-#endif
-		b = in_le32(old_base + MV64x60_INTERNAL_SPACE_DECODE);
-		b &= mask;
-		b |= ((u32)new_base >> (32 - bits));
-		out_le32(old_base + MV64x60_INTERNAL_SPACE_DECODE, b);
-
-		__asm__ __volatile__("sync");
-
-		/* Wait for change to happen (in accordance with the manual) */
-		while (in_le32(new_base + MV64x60_INTERNAL_SPACE_DECODE) != b);
-	}
-}
-
-void __attribute__ ((weak))
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-}
-
-void *
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		void *ign1, void *ign2)
-{
-	mv64x60_move_base((void __iomem *)CONFIG_MV64X60_BASE,
-		(void __iomem *)CONFIG_MV64X60_NEW_BASE);
-	mv64x60_board_init((void __iomem *)CONFIG_MV64X60_BASE,
-		(void __iomem *)CONFIG_MV64X60_NEW_BASE);
-	return decompress_kernel(load_addr, num_words, cksum);
-}
diff --git a/arch/ppc/boot/simple/misc-prep.c b/arch/ppc/boot/simple/misc-prep.c
deleted file mode 100644
index 0086e1cfb48c..000000000000
--- a/arch/ppc/boot/simple/misc-prep.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Maintainer: Tom Rini <trini@kernel.crashing.org>
- *
- * In the past: Gary Thomas, Cort Dougan <cort@cs.nmt.edu>
- */
-
-#include <linux/pci_ids.h>
-#include <linux/types.h>
-#include <asm/residual.h>
-#include <asm/string.h>
-#include <asm/byteorder.h>
-#include "mpc10x.h"
-#include "of1275.h"
-#include "nonstdio.h"
-
-extern int keyb_present;	/* keyboard controller is present by default */
-RESIDUAL hold_resid_buf;
-RESIDUAL *hold_residual = &hold_resid_buf;
-static void *OFW_interface;	/* Pointer to OF, if available. */
-
-#ifdef CONFIG_VGA_CONSOLE
-char *vidmem = (char *)0xC00B8000;
-int lines = 25, cols = 80;
-int orig_x, orig_y = 24;
-#endif /* CONFIG_VGA_CONSOLE */
-
-extern int CRT_tstc(void);
-extern int vga_init(unsigned char *ISA_mem);
-extern void gunzip(void *, int, unsigned char *, int *);
-extern unsigned long serial_init(int chan, void *ignored);
-extern void serial_fixups(void);
-extern struct bi_record *decompress_kernel(unsigned long load_addr,
-		int num_words, unsigned long cksum);
-extern void disable_6xx_mmu(void);
-extern unsigned long mpc10x_get_mem_size(void);
-
-static void
-writel(unsigned int val, unsigned int address)
-{
-	/* Ensure I/O operations complete */
-	__asm__ volatile("eieio");
-	*(unsigned int *)address = cpu_to_le32(val);
-}
-
-#define PCI_CFG_ADDR(dev,off)	((0x80<<24) | (dev<<8) | (off&0xfc))
-#define PCI_CFG_DATA(off)	(MPC10X_MAPA_CNFG_DATA+(off&3))
-
-static void
-pci_read_config_32(unsigned char devfn,
-		unsigned char offset,
-		unsigned int *val)
-{
-	/* Ensure I/O operations complete */
-	__asm__ volatile("eieio");
-	*(unsigned int *)PCI_CFG_ADDR(devfn,offset) =
-		cpu_to_le32(MPC10X_MAPA_CNFG_ADDR);
-	/* Ensure I/O operations complete */
-	__asm__ volatile("eieio");
-	*val = le32_to_cpu(*(unsigned int *)PCI_CFG_DATA(offset));
-	return;
-}
-
-#ifdef CONFIG_VGA_CONSOLE
-void
-scroll(void)
-{
-	int i;
-
-	memcpy ( vidmem, vidmem + cols * 2, ( lines - 1 ) * cols * 2 );
-	for ( i = ( lines - 1 ) * cols * 2; i < lines * cols * 2; i += 2 )
-		vidmem[i] = ' ';
-}
-#endif /* CONFIG_VGA_CONSOLE */
-
-unsigned long
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		  RESIDUAL *residual, void *OFW)
-{
-	int start_multi = 0;
-	unsigned int pci_viddid, pci_did, tulip_pci_base, tulip_base;
-
-	/* If we have Open Firmware, initialise it immediately */
-	if (OFW) {
-		OFW_interface = OFW;
-		ofinit(OFW_interface);
-	}
-
-	board_isa_init();
-#if defined(CONFIG_VGA_CONSOLE)
-	vga_init((unsigned char *)0xC0000000);
-#endif /* CONFIG_VGA_CONSOLE */
-
-	if (residual) {
-		/* Is this Motorola PPCBug? */
-		if ((1 & residual->VitalProductData.FirmwareSupports) &&
-		    (1 == residual->VitalProductData.FirmwareSupplier)) {
-			unsigned char base_mod;
-			unsigned char board_type = inb(0x801) & 0xF0;
-
-			/*
-			 * Reset the onboard 21x4x Ethernet
-			 * Motorola Ethernet is at IDSEL 14 (devfn 0x70)
-			 */
-			pci_read_config_32(0x70, 0x00, &pci_viddid);
-			pci_did = (pci_viddid & 0xffff0000) >> 16;
-			/* Be sure we've really found a 21x4x chip */
-			if (((pci_viddid & 0xffff) == PCI_VENDOR_ID_DEC) &&
-				((pci_did == PCI_DEVICE_ID_DEC_TULIP_FAST) ||
-				(pci_did == PCI_DEVICE_ID_DEC_TULIP) ||
-				(pci_did == PCI_DEVICE_ID_DEC_TULIP_PLUS) ||
-				(pci_did == PCI_DEVICE_ID_DEC_21142))) {
-				pci_read_config_32(0x70,
-						0x10,
-						&tulip_pci_base);
-				/* Get the physical base address */
-				tulip_base =
-					(tulip_pci_base & ~0x03UL) + 0x80000000;
-				/* Strobe the 21x4x reset bit in CSR0 */
-				writel(0x1, tulip_base);
-			}
-
-			/* If this is genesis 2 board then check for no
-			 * keyboard controller and more than one processor.
-			 */
-			if (board_type == 0xe0) {
-				base_mod = inb(0x803);
-				/* if a MVME2300/2400 or a Sitka then no keyboard */
-				if((base_mod == 0xFA) || (base_mod == 0xF9) ||
-				   (base_mod == 0xE1)) {
-					keyb_present = 0;	/* no keyboard */
-				}
-			}
-			/* If this is a multiprocessor system then
-			 * park the other processor so that the
-			 * kernel knows where to find them.
-			 */
-			if (residual->MaxNumCpus > 1)
-				start_multi = 1;
-		}
-		memcpy(hold_residual,residual,sizeof(RESIDUAL));
-        }
-
-	/* Call decompress_kernel */
-	decompress_kernel(load_addr, num_words, cksum);
-
-	if (start_multi) {
-		residual->VitalProductData.SmpIar = (unsigned long)0xc0;
-		residual->Cpus[1].CpuState = CPU_GOOD;
-		hold_residual->VitalProductData.Reserved5 = 0xdeadbeef;
-	}
-
-	/* Now go and clear out the BATs and ensure that our MSR is
-	 * correct .*/
-	disable_6xx_mmu();
-
-	/* Make r3 be a pointer to the residual data. */
-	return (unsigned long)hold_residual;
-}
-
-unsigned long
-get_mem_size(void)
-{
-	unsigned int pci_viddid, pci_did;
-
-	/* First, figure out what kind of host bridge we are on.  If it's
-	 * an MPC10x, we can ask it directly how much memory it has.
-	 * Otherwise, see if the residual data has anything.  This isn't
-	 * the best way, but it can be the only way.  If there's nothing,
-	 * assume 32MB. -- Tom.
-	 */
-	/* See what our host bridge is. */
-	pci_read_config_32(0x00, 0x00, &pci_viddid);
-	pci_did = (pci_viddid & 0xffff0000) >> 16;
-	/* See if we are on an MPC10x. */
-	if (((pci_viddid & 0xffff) == PCI_VENDOR_ID_MOTOROLA)
-			&& ((pci_did == PCI_DEVICE_ID_MOTOROLA_MPC105)
-				|| (pci_did == PCI_DEVICE_ID_MOTOROLA_MPC106)
-				|| (pci_did == PCI_DEVICE_ID_MOTOROLA_MPC107)))
-		return mpc10x_get_mem_size();
-	/* If it's not, see if we have anything in the residual data. */
-	else if (hold_residual && hold_residual->TotalMemory)
-		return hold_residual->TotalMemory;
-	else if (OFW_interface) {
-		/*
-		 * This is a 'best guess' check.  We want to make sure
-		 * we don't try this on a PReP box without OF
-		 *     -- Cort
-		 */
-		while (OFW_interface)
-		{
-			phandle dev_handle;
-			int mem_info[2];
-
-			/* get handle to memory description */
-			if (!(dev_handle = finddevice("/memory@0")))
-				break;
-
-			/* get the info */
-			if (getprop(dev_handle, "reg", mem_info,
-						sizeof(mem_info)) != 8)
-				break;
-
-			return mem_info[1];
-		}
-	}
-
-	/* Fall back to hard-coding 32MB. */
-	return 32*1024*1024;
-}
diff --git a/arch/ppc/boot/simple/misc-radstone_ppc7d.c b/arch/ppc/boot/simple/misc-radstone_ppc7d.c
deleted file mode 100644
index 0f302ea9c3d1..000000000000
--- a/arch/ppc/boot/simple/misc-radstone_ppc7d.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Misc data for Radstone PPC7D board.
- *
- * Author: James Chapman <jchapman@katalix.com>
- */
-
-#include <linux/types.h>
-#include <platforms/radstone_ppc7d.h>
-
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-extern u32 mv64x60_console_baud;
-extern u32 mv64x60_mpsc_clk_src;
-extern u32 mv64x60_mpsc_clk_freq;
-#endif
-
-void
-mv64x60_board_init(void __iomem *old_base, void __iomem *new_base)
-{
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	mv64x60_console_baud = PPC7D_DEFAULT_BAUD;
-	mv64x60_mpsc_clk_src = PPC7D_MPSC_CLK_SRC;
-	mv64x60_mpsc_clk_freq = PPC7D_MPSC_CLK_FREQ;
-#endif
-}
diff --git a/arch/ppc/boot/simple/misc-spruce.c b/arch/ppc/boot/simple/misc-spruce.c
deleted file mode 100644
index 5b3a6c6f113b..000000000000
--- a/arch/ppc/boot/simple/misc-spruce.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * Misc. bootloader code for IBM Spruce reference platform
- *
- * Authors: Johnnie Peters <jpeters@mvista.com>
- *	    Matt Porter <mporter@mvista.com>
- *
- * Derived from arch/ppc/boot/prep/misc.c
- *
- * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#include <asm/bootinfo.h>
-
-extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
-				       unsigned long cksum);
-
-/* Define some important locations of the Spruce. */
-#define SPRUCE_PCI_CONFIG_ADDR	0xfec00000
-#define SPRUCE_PCI_CONFIG_DATA	0xfec00004
-
-/* PCI configuration space access routines. */
-unsigned int *pci_config_address = (unsigned int *)SPRUCE_PCI_CONFIG_ADDR;
-unsigned char *pci_config_data   = (unsigned char *)SPRUCE_PCI_CONFIG_DATA;
-
-void cpc700_pcibios_read_config_byte(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned char *val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	*val= (in_le32((unsigned *)pci_config_data) >> (8 * (offset & 3))) & 0xff;
-}
-
-void cpc700_pcibios_write_config_byte(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned char val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	out_8(pci_config_data + (offset&3), val);
-}
-
-void cpc700_pcibios_read_config_word(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned short *val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	*val= in_le16((unsigned short *)(pci_config_data + (offset&3)));
-}
-
-void cpc700_pcibios_write_config_word(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned short val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	out_le16((unsigned short *)(pci_config_data + (offset&3)), val);
-}
-
-void cpc700_pcibios_read_config_dword(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned int *val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	*val= in_le32((unsigned *)pci_config_data);
-}
-
-void cpc700_pcibios_write_config_dword(unsigned char bus, unsigned char dev_fn,
-			     unsigned char offset, unsigned int val)
-{
-	out_le32(pci_config_address,
-		 (((bus & 0xff)<<16) | (dev_fn<<8) | (offset&0xfc) | 0x80000000));
-
-	out_le32((unsigned *)pci_config_data, val);
-}
-
-#define PCNET32_WIO_RDP		0x10
-#define PCNET32_WIO_RAP		0x12
-#define PCNET32_WIO_RESET	0x14
-
-#define PCNET32_DWIO_RDP	0x10
-#define PCNET32_DWIO_RAP	0x14
-#define PCNET32_DWIO_RESET	0x18
-
-/* Processor interface config register access */
-#define PIFCFGADDR 0xff500000
-#define PIFCFGDATA 0xff500004
-
-#define PLBMIFOPT 0x18 /* PLB Master Interface Options */
-
-#define MEM_MBEN	0x24
-#define MEM_TYPE	0x28
-#define MEM_B1SA	0x3c
-#define MEM_B1EA	0x5c
-#define MEM_B2SA	0x40
-#define MEM_B2EA	0x60
-
-unsigned long
-get_mem_size(void)
-{
-	int loop;
-	unsigned long mem_size = 0;
-	unsigned long mem_mben;
-	unsigned long mem_type;
-	unsigned long mem_start;
-	unsigned long mem_end;
-	volatile int *mem_addr = (int *)0xff500008;
-	volatile int *mem_data = (int *)0xff50000c;
-
-	/* Get the size of memory from the memory controller. */
-	*mem_addr = MEM_MBEN;
-	asm("sync");
-	mem_mben = *mem_data;
-	asm("sync");
-	for(loop = 0; loop < 1000; loop++);
-
-	*mem_addr = MEM_TYPE;
-	asm("sync");
-	mem_type = *mem_data;
-	asm("sync");
-	for(loop = 0; loop < 1000; loop++);
-
-	*mem_addr = MEM_TYPE;
-	/* Confirm bank 1 has DRAM memory */
-	if ((mem_mben & 0x40000000) &&
-				((mem_type & 0x30000000) == 0x10000000)) {
-		*mem_addr = MEM_B1SA;
-		asm("sync");
-		mem_start = *mem_data;
-		asm("sync");
-		for(loop = 0; loop < 1000; loop++);
-
-		*mem_addr = MEM_B1EA;
-		asm("sync");
-		mem_end = *mem_data;
-		asm("sync");
-		for(loop = 0; loop < 1000; loop++);
-
-		mem_size = mem_end - mem_start + 0x100000;
-	}
-
-	/* Confirm bank 2 has DRAM memory */
-	if ((mem_mben & 0x20000000) &&
-				((mem_type & 0xc000000) == 0x4000000)) {
-		*mem_addr = MEM_B2SA;
-		asm("sync");
-		mem_start = *mem_data;
-		asm("sync");
-		for(loop = 0; loop < 1000; loop++);
-
-		*mem_addr = MEM_B2EA;
-		asm("sync");
-		mem_end = *mem_data;
-		asm("sync");
-		for(loop = 0; loop < 1000; loop++);
-
-		mem_size += mem_end - mem_start + 0x100000;
-	}
-	return mem_size;
-}
-
-unsigned long
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		void *ign1, void *ign2)
-{
-	int csr0;
-	int csr_id;
-	int pci_devfn;
-	int found_multi = 0;
-	unsigned short vendor;
-	unsigned short device;
-	unsigned short command;
-	unsigned char header_type;
-	unsigned int bar0;
-	volatile int *pif_addr = (int *)0xff500000;
-	volatile int *pif_data = (int *)0xff500004;
-
-	/*
-	 * Gah, these firmware guys need to learn that hardware
-	 * byte swapping is evil! Disable all hardware byte
-	 * swapping so it doesn't hurt anyone.
-	 */
-	*pif_addr = PLBMIFOPT;
-	asm("sync");
-	*pif_data = 0x00000000;
-	asm("sync");
-
-	/* Search out and turn off the PcNet ethernet boot device. */
-	for (pci_devfn = 1; pci_devfn < 0xff; pci_devfn++) {
-		if (PCI_FUNC(pci_devfn) && !found_multi)
-			continue;
-
-		cpc700_pcibios_read_config_byte(0, pci_devfn,
-				PCI_HEADER_TYPE, &header_type);
-
-		if (!PCI_FUNC(pci_devfn))
-			found_multi = header_type & 0x80;
-
-		cpc700_pcibios_read_config_word(0, pci_devfn, PCI_VENDOR_ID,
-				&vendor);
-
-		if (vendor != 0xffff) {
-			cpc700_pcibios_read_config_word(0, pci_devfn,
-						PCI_DEVICE_ID, &device);
-
-			/* If this PCI device is the Lance PCNet board then turn it off */
-			if ((vendor == PCI_VENDOR_ID_AMD) &&
-					(device == PCI_DEVICE_ID_AMD_LANCE)) {
-
-				/* Turn on I/O Space on the board. */
-				cpc700_pcibios_read_config_word(0, pci_devfn,
-						PCI_COMMAND, &command);
-				command |= 0x1;
-				cpc700_pcibios_write_config_word(0, pci_devfn,
-						PCI_COMMAND, command);
-
-				/* Get the I/O space address */
-				cpc700_pcibios_read_config_dword(0, pci_devfn,
-						PCI_BASE_ADDRESS_0, &bar0);
-				bar0 &= 0xfffffffe;
-
-				/* Reset the PCNet Board */
-				inl (bar0+PCNET32_DWIO_RESET);
-				inw (bar0+PCNET32_WIO_RESET);
-
-				/* First do a work oriented read of csr0.  If the value is
-				 * 4 then this is the correct mode to access the board.
-				 * If not try a double word ortiented read.
-				 */
-				outw(0, bar0 + PCNET32_WIO_RAP);
-				csr0 = inw(bar0 + PCNET32_WIO_RDP);
-
-				if (csr0 == 4) {
-					/* Check the Chip id register */
-					outw(88, bar0 + PCNET32_WIO_RAP);
-					csr_id = inw(bar0 + PCNET32_WIO_RDP);
-
-					if (csr_id) {
-						/* This is the valid mode - set the stop bit */
-						outw(0, bar0 + PCNET32_WIO_RAP);
-						outw(csr0, bar0 + PCNET32_WIO_RDP);
-					}
-				} else {
-					outl(0, bar0 + PCNET32_DWIO_RAP);
-					csr0 = inl(bar0 + PCNET32_DWIO_RDP);
-					if (csr0 == 4) {
-						/* Check the Chip id register */
-						outl(88, bar0 + PCNET32_WIO_RAP);
-						csr_id = inl(bar0 + PCNET32_WIO_RDP);
-
-						if (csr_id) {
-							/* This is the valid mode  - set the stop bit*/
-							outl(0, bar0 + PCNET32_WIO_RAP);
-							outl(csr0, bar0 + PCNET32_WIO_RDP);
-						}
-					}
-				}
-			}
-		}
-	}
-
-	return decompress_kernel(load_addr, num_words, cksum);
-}
diff --git a/arch/ppc/boot/simple/misc.c b/arch/ppc/boot/simple/misc.c
deleted file mode 100644
index c3d3305eb5ca..000000000000
--- a/arch/ppc/boot/simple/misc.c
+++ /dev/null
@@ -1,278 +0,0 @@
-/*
- * Misc. bootloader code for many machines.  This assumes you have are using
- * a 6xx/7xx/74xx CPU in your machine.  This assumes the chunk of memory
- * below 8MB is free.  Finally, it assumes you have a NS16550-style uart for
- * your serial console.  If a machine meets these requirements, it can quite
- * likely use this code during boot.
- *
- * Author: Matt Porter <mporter@mvista.com>
- * Derived from arch/ppc/boot/prep/misc.c
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/bootinfo.h>
-#ifdef CONFIG_4xx
-#include <asm/ibm4xx.h>
-#endif
-#include <asm/reg.h>
-
-#include "nonstdio.h"
-
-/* Default cmdline */
-#ifdef CONFIG_CMDLINE
-#define CMDLINE CONFIG_CMDLINE
-#else
-#define CMDLINE ""
-#endif
-
-/* Keyboard (and VGA console)? */
-#ifdef CONFIG_VGA_CONSOLE
-#define HAS_KEYB 1
-#else
-#define HAS_KEYB 0
-#endif
-
-/* Will / Can the user give input?
- */
-#if (defined(CONFIG_SERIAL_8250_CONSOLE) \
-	|| defined(CONFIG_VGA_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \
-	|| defined(CONFIG_SERIAL_MPSC_CONSOLE))
-#define INTERACTIVE_CONSOLE	1
-#endif
-
-char *avail_ram;
-char *end_avail;
-char *zimage_start;
-char cmd_preset[] = CMDLINE;
-char cmd_buf[256];
-char *cmd_line = cmd_buf;
-int keyb_present = HAS_KEYB;
-int zimage_size;
-
-unsigned long com_port;
-unsigned long initrd_size = 0;
-
-/* The linker tells us various locations in the image */
-extern char __image_begin, __image_end;
-extern char __ramdisk_begin, __ramdisk_end;
-extern char _end[];
-/* Original location */
-extern unsigned long start;
-
-extern int CRT_tstc(void);
-extern unsigned long serial_init(int chan, void *ignored);
-extern void serial_close(unsigned long com_port);
-extern void gunzip(void *, int, unsigned char *, int *);
-extern void serial_fixups(void);
-
-/* Allow get_mem_size to be hooked into.  This is the default. */
-unsigned long __attribute__ ((weak))
-get_mem_size(void)
-{
-	return 0;
-}
-
-#if defined(CONFIG_40x)
-#define PPC4xx_EMAC0_MR0	EMAC0_BASE
-#endif
-
-#if defined(CONFIG_44x) && defined(PPC44x_EMAC0_MR0)
-#define PPC4xx_EMAC0_MR0	PPC44x_EMAC0_MR0
-#endif
-
-struct bi_record *
-decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
-{
-#ifdef INTERACTIVE_CONSOLE
-	int timer = 0;
-	char ch;
-#endif
-	char *cp;
-	struct bi_record *rec;
-	unsigned long initrd_loc = 0, TotalMemory = 0;
-
-#if defined(CONFIG_SERIAL_8250_CONSOLE) || defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	com_port = serial_init(0, NULL);
-#endif
-
-#if defined(PPC4xx_EMAC0_MR0)
-	/* Reset MAL */
-	mtdcr(DCRN_MALCR(DCRN_MAL_BASE), MALCR_MMSR);
-	/* Wait for reset */
-	while (mfdcr(DCRN_MALCR(DCRN_MAL_BASE)) & MALCR_MMSR) {};
-	/* Reset EMAC */
-	*(volatile unsigned long *)PPC4xx_EMAC0_MR0 = 0x20000000;
-	__asm__ __volatile__("eieio");
-#endif
-
-	/*
-	 * Call get_mem_size(), which is memory controller dependent,
-	 * and we must have the correct file linked in here.
-	 */
-	TotalMemory = get_mem_size();
-
-	/* assume the chunk below 8M is free */
-	end_avail = (char *)0x00800000;
-
-	/*
-	 * Reveal where we were loaded at and where we
-	 * were relocated to.
-	 */
-	puts("loaded at:     "); puthex(load_addr);
-	puts(" "); puthex((unsigned long)(load_addr + (4*num_words)));
-	puts("\n");
-	if ( (unsigned long)load_addr != (unsigned long)&start )
-	{
-		puts("relocated to:  "); puthex((unsigned long)&start);
-		puts(" ");
-		puthex((unsigned long)((unsigned long)&start + (4*num_words)));
-		puts("\n");
-	}
-
-	/*
-	 * We link ourself to 0x00800000.  When we run, we relocate
-	 * ourselves there.  So we just need __image_begin for the
-	 * start. -- Tom
-	 */
-	zimage_start = (char *)(unsigned long)(&__image_begin);
-	zimage_size = (unsigned long)(&__image_end) -
-			(unsigned long)(&__image_begin);
-
-	initrd_size = (unsigned long)(&__ramdisk_end) -
-		(unsigned long)(&__ramdisk_begin);
-
-	/*
-	 * The zImage and initrd will be between start and _end, so they've
-	 * already been moved once.  We're good to go now. -- Tom
-	 */
-	avail_ram = (char *)PAGE_ALIGN((unsigned long)_end);
-	puts("zimage at:     "); puthex((unsigned long)zimage_start);
-	puts(" "); puthex((unsigned long)(zimage_size+zimage_start));
-	puts("\n");
-
-	if ( initrd_size ) {
-		puts("initrd at:     ");
-		puthex((unsigned long)(&__ramdisk_begin));
-		puts(" "); puthex((unsigned long)(&__ramdisk_end));puts("\n");
-	}
-
-#ifndef CONFIG_40x /* don't overwrite the 40x image located at 0x00400000! */
-	avail_ram = (char *)0x00400000;
-#endif
-	end_avail = (char *)0x00800000;
-	puts("avail ram:     "); puthex((unsigned long)avail_ram); puts(" ");
-	puthex((unsigned long)end_avail); puts("\n");
-
-	if (keyb_present)
-		CRT_tstc();  /* Forces keyboard to be initialized */
-
-	/* Display standard Linux/PPC boot prompt for kernel args */
-	puts("\nLinux/PPC load: ");
-	cp = cmd_line;
-	memcpy (cmd_line, cmd_preset, sizeof(cmd_preset));
-	while ( *cp ) putc(*cp++);
-
-#ifdef INTERACTIVE_CONSOLE
-	/*
-	 * If they have a console, allow them to edit the command line.
-	 * Otherwise, don't bother wasting the five seconds.
-	 */
-	while (timer++ < 5*1000) {
-		if (tstc()) {
-			while ((ch = getc()) != '\n' && ch != '\r') {
-				/* Test for backspace/delete */
-				if (ch == '\b' || ch == '\177') {
-					if (cp != cmd_line) {
-						cp--;
-						puts("\b \b");
-					}
-				/* Test for ^x/^u (and wipe the line) */
-				} else if (ch == '\030' || ch == '\025') {
-					while (cp != cmd_line) {
-						cp--;
-						puts("\b \b");
-					}
-				} else {
-					*cp++ = ch;
-					putc(ch);
-				}
-			}
-			break;  /* Exit 'timer' loop */
-		}
-		udelay(1000);  /* 1 msec */
-	}
-	*cp = 0;
-#endif
-	puts("\n");
-
-	puts("Uncompressing Linux...");
-	gunzip(NULL, 0x400000, zimage_start, &zimage_size);
-	puts("done.\n");
-
-	/* get the bi_rec address */
-	rec = bootinfo_addr(zimage_size);
-
-	/* We need to make sure that the initrd and bi_recs do not
-	 * overlap. */
-	if ( initrd_size ) {
-		unsigned long rec_loc = (unsigned long) rec;
-		initrd_loc = (unsigned long)(&__ramdisk_begin);
-		/* If the bi_recs are in the middle of the current
-		 * initrd, move the initrd to the next MB
-		 * boundary. */
-		if ((rec_loc > initrd_loc) &&
-				((initrd_loc + initrd_size) > rec_loc)) {
-			initrd_loc = _ALIGN((unsigned long)(zimage_size)
-					+ (2 << 20) - 1, (2 << 20));
-		 	memmove((void *)initrd_loc, &__ramdisk_begin,
-				 initrd_size);
-	         	puts("initrd moved:  "); puthex(initrd_loc);
-		 	puts(" "); puthex(initrd_loc + initrd_size);
-		 	puts("\n");
-		}
-	}
-
-	bootinfo_init(rec);
-	if ( TotalMemory )
-		bootinfo_append(BI_MEMSIZE, sizeof(int), (void*)&TotalMemory);
-
-	bootinfo_append(BI_CMD_LINE, strlen(cmd_line)+1, (void*)cmd_line);
-
-	/* add a bi_rec for the initrd if it exists */
-	if (initrd_size) {
-		unsigned long initrd[2];
-
-		initrd[0] = initrd_loc;
-		initrd[1] = initrd_size;
-
-		bootinfo_append(BI_INITRD, sizeof(initrd), &initrd);
-	}
-	puts("Now booting the kernel\n");
-	serial_close(com_port);
-
-	return rec;
-}
-
-void __attribute__ ((weak))
-board_isa_init(void)
-{
-}
-
-/* Allow decompress_kernel to be hooked into.  This is the default. */
-void * __attribute__ ((weak))
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		void *ign1, void *ign2)
-{
-		board_isa_init();
-		return decompress_kernel(load_addr, num_words, cksum);
-}
diff --git a/arch/ppc/boot/simple/mpc10x_memory.c b/arch/ppc/boot/simple/mpc10x_memory.c
deleted file mode 100644
index 8da8f576031d..000000000000
--- a/arch/ppc/boot/simple/mpc10x_memory.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- * A routine to find out how much memory the machine has.
- *
- * Based on:
- * arch/ppc/kernel/mpc10x_common.c
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/pci.h>
-#include <asm/types.h>
-#include <asm/io.h>
-#include "mpc10x.h"
-
-/*
- * *** WARNING - A BAT MUST be set to access the PCI config addr/data regs ***
- */
-
-/*
- * PCI config space macros, similar to indirect_xxx and early_xxx macros.
- * We assume bus 0.
- */
-#define MPC10X_CFG_read(val, addr, type, op)	*val = op((type)(addr))
-#define MPC10X_CFG_write(val, addr, type, op)	op((type *)(addr), (val))
-
-#define MPC10X_PCI_OP(rw, size, type, op, mask)			 	\
-static void								\
-mpc10x_##rw##_config_##size(unsigned int __iomem *cfg_addr, 			\
-		unsigned int *cfg_data, int devfn, int offset,		\
-		type val)						\
-{									\
-	out_be32(cfg_addr, 						\
-		 ((offset & 0xfc) << 24) | (devfn << 16)		\
-		 | (0 << 8) | 0x80);					\
-	MPC10X_CFG_##rw(val, cfg_data + (offset & mask), type, op);	\
-	return;    					 		\
-}
-
-MPC10X_PCI_OP(read, byte,  u8 *, in_8, 3)
-MPC10X_PCI_OP(read, dword, u32 *, in_le32, 0)
-
-/*
- * Read the memory controller registers to determine the amount of memory in
- * the system.  This assumes that the firmware has correctly set up the memory
- * controller registers.  On CONFIG_PPC_PREP, we know we are being called
- * under a PReP memory map. On all other machines, we assume we are under
- * a CHRP memory map.  Further, on CONFIG_PPC_PREP we must rename
- * this function.
- */
-#ifdef CONFIG_PPC_PREP
-#define get_mem_size mpc10x_get_mem_size
-#endif
-unsigned long
-get_mem_size(void)
-{
-	unsigned int *config_addr, *config_data, val;
-	unsigned long start, end, total, offset;
-	int i;
-	unsigned char bank_enables;
-
-#ifdef CONFIG_PPC_PREP
-	config_addr = (unsigned int *)MPC10X_MAPA_CNFG_ADDR;
-	config_data = (unsigned int *)MPC10X_MAPA_CNFG_DATA;
-#else
-	config_addr = (unsigned int *)MPC10X_MAPB_CNFG_ADDR;
-	config_data = (unsigned int *)MPC10X_MAPB_CNFG_DATA;
-#endif
-
-	mpc10x_read_config_byte(config_addr, config_data, PCI_DEVFN(0,0),
-			MPC10X_MCTLR_MEM_BANK_ENABLES, &bank_enables);
-
-	total = 0;
-
-	for (i = 0; i < 8; i++) {
-		if (bank_enables & (1 << i)) {
-			offset = MPC10X_MCTLR_MEM_START_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr, config_data,
-					PCI_DEVFN(0,0), offset, &val);
-			start = (val >> ((i & 3) << 3)) & 0xff;
-
-			offset = MPC10X_MCTLR_EXT_MEM_START_1 + ((i>3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr, config_data,
-					PCI_DEVFN(0,0), offset, &val);
-			val = (val >> ((i & 3) << 3)) & 0x03;
-			start = (val << 28) | (start << 20);
-
-			offset = MPC10X_MCTLR_MEM_END_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr, config_data,
-					PCI_DEVFN(0,0), offset, &val);
-			end = (val >> ((i & 3) << 3)) & 0xff;
-
-			offset = MPC10X_MCTLR_EXT_MEM_END_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr, config_data,
-					PCI_DEVFN(0,0), offset, &val);
-			val = (val >> ((i & 3) << 3)) & 0x03;
-			end = (val << 28) | (end << 20) | 0xfffff;
-
-			total += (end - start + 1);
-		}
-	}
-
-	return total;
-}
diff --git a/arch/ppc/boot/simple/mpc52xx_tty.c b/arch/ppc/boot/simple/mpc52xx_tty.c
deleted file mode 100644
index 6955891fb031..000000000000
--- a/arch/ppc/boot/simple/mpc52xx_tty.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Minimal serial functions needed to send messages out a MPC52xx
- * Programmable Serial Controller (PSC).
- *
- * Author: Dale Farnsworth <dfarnsworth@mvista.com>
- *
- * 2003-2004 (c) MontaVista, Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <asm/uaccess.h>
-#include <asm/mpc52xx.h>
-#include <asm/mpc52xx_psc.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-#include <asm/time.h>
-
-
-#ifdef MPC52xx_PF_CONSOLE_PORT
-#define MPC52xx_CONSOLE MPC52xx_PSCx_OFFSET(MPC52xx_PF_CONSOLE_PORT)
-#define MPC52xx_PSC_CONFIG_SHIFT ((MPC52xx_PF_CONSOLE_PORT-1)<<2)
-#else
-#error "MPC52xx_PF_CONSOLE_PORT not defined"
-#endif
-
-static struct mpc52xx_psc __iomem *psc =
-	(struct mpc52xx_psc __iomem *) MPC52xx_PA(MPC52xx_CONSOLE);
-
-/* The decrementer counts at the system bus clock frequency
- * divided by four.  The most accurate time base is connected to the
- * rtc.  We read the decrementer change during one rtc tick
- * and multiply by 4 to get the system bus clock frequency. Since a
- * rtc tick is one seconds, and that's pretty long, we change the rtc
- * dividers temporarily to set them 64x faster ;)
- */
-static int
-mpc52xx_ipbfreq(void)
-{
-	struct mpc52xx_rtc __iomem *rtc =
-		(struct mpc52xx_rtc __iomem *) MPC52xx_PA(MPC52xx_RTC_OFFSET);
-	struct mpc52xx_cdm __iomem *cdm =
-		(struct mpc52xx_cdm __iomem *) MPC52xx_PA(MPC52xx_CDM_OFFSET);
-	int current_time, previous_time;
-	int tbl_start, tbl_end;
-	int xlbfreq, ipbfreq;
-
-	out_be32(&rtc->dividers, 0x8f1f0000);	/* Set RTC 64x faster */
-	previous_time = in_be32(&rtc->time);
-	while ((current_time = in_be32(&rtc->time)) == previous_time) ;
-	tbl_start = get_tbl();
-	previous_time = current_time;
-	while ((current_time = in_be32(&rtc->time)) == previous_time) ;
-	tbl_end = get_tbl();
-	out_be32(&rtc->dividers, 0xffff0000);   /* Restore RTC */
-
-	xlbfreq = (tbl_end - tbl_start) << 8;
-	ipbfreq = (in_8(&cdm->ipb_clk_sel) & 1) ? xlbfreq / 2 : xlbfreq;
-
-	return ipbfreq;
-}
-
-unsigned long
-serial_init(int ignored, void *ignored2)
-{
-	struct mpc52xx_gpio __iomem *gpio =
-		(struct mpc52xx_gpio __iomem *) MPC52xx_PA(MPC52xx_GPIO_OFFSET);
-	int divisor;
-	int mode1;
-	int mode2;
-	u32 val32;
-
-	static int been_here = 0;
-
-	if (been_here)
-		return 0;
-
-	been_here = 1;
-
-	val32 = in_be32(&gpio->port_config);
-	val32 &= ~(0x7 << MPC52xx_PSC_CONFIG_SHIFT);
-	val32 |= MPC52xx_GPIO_PSC_CONFIG_UART_WITHOUT_CD
-				<< MPC52xx_PSC_CONFIG_SHIFT;
-	out_be32(&gpio->port_config, val32);
-
-	out_8(&psc->command, MPC52xx_PSC_RST_TX
-			| MPC52xx_PSC_RX_DISABLE | MPC52xx_PSC_TX_ENABLE);
-	out_8(&psc->command, MPC52xx_PSC_RST_RX);
-
-	out_be32(&psc->sicr, 0x0);
-	out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00);
-	out_be16(&psc->tfalarm, 0xf8);
-
-	out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1
-			| MPC52xx_PSC_RX_ENABLE
-			| MPC52xx_PSC_TX_ENABLE);
-
-	divisor = ((mpc52xx_ipbfreq()
-			/ (CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD * 16)) + 1) >> 1;
-
-	mode1 = MPC52xx_PSC_MODE_8_BITS | MPC52xx_PSC_MODE_PARNONE
-			| MPC52xx_PSC_MODE_ERR;
-	mode2 = MPC52xx_PSC_MODE_ONE_STOP;
-
-	out_8(&psc->ctur, divisor>>8);
-	out_8(&psc->ctlr, divisor);
-	out_8(&psc->command, MPC52xx_PSC_SEL_MODE_REG_1);
-	out_8(&psc->mode, mode1);
-	out_8(&psc->mode, mode2);
-
-	return 0;	/* ignored */
-}
-
-void
-serial_putc(void *ignored, const char c)
-{
-	serial_init(0, NULL);
-
-	while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP)) ;
-	out_8(&psc->mpc52xx_psc_buffer_8, c);
-	while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP)) ;
-}
-
-char
-serial_getc(void *ignored)
-{
-	while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY)) ;
-
-	return in_8(&psc->mpc52xx_psc_buffer_8);
-}
-
-int
-serial_tstc(void *ignored)
-{
-	return (in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY) != 0;
-}
diff --git a/arch/ppc/boot/simple/mv64x60_tty.c b/arch/ppc/boot/simple/mv64x60_tty.c
deleted file mode 100644
index 8a735787a6e9..000000000000
--- a/arch/ppc/boot/simple/mv64x60_tty.c
+++ /dev/null
@@ -1,364 +0,0 @@
-/*
- * Bootloader version of the embedded MPSC/UART driver for the Marvell 64x60.
- * Note: Due to a GT64260A erratum, DMA will be used for UART input (via SDMA).
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/* This code assumes that the data cache has been disabled (L1, L2, L3). */
-
-#include <linux/types.h>
-#include <linux/serial_reg.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-#include <asm/mv64x60_defs.h>
-#include <mpsc_defs.h>
-
-#ifdef CONFIG_EV64360
-#include <platforms/ev64360.h>
-u32	mv64x60_console_baud = EV64360_DEFAULT_BAUD;
-u32	mv64x60_mpsc_clk_src = EV64360_MPSC_CLK_SRC; /* TCLK */
-u32	mv64x60_mpsc_clk_freq = EV64360_MPSC_CLK_FREQ;
-#else
-u32	mv64x60_console_baud = 9600;
-u32	mv64x60_mpsc_clk_src = 8; /* TCLK */
-u32	mv64x60_mpsc_clk_freq = 100000000;
-#endif
-
-extern void udelay(long);
-static void stop_dma(int chan);
-
-static void __iomem *mv64x60_base = (void __iomem *)CONFIG_MV64X60_NEW_BASE;
-
-struct sdma_regs {
-	u32	sdc;
-	u32	sdcm;
-	u32	rx_desc;
-	u32	rx_buf_ptr;
-	u32	scrdp;
-	u32	tx_desc;
-	u32	sctdp;
-	u32	sftdp;
-};
-
-static struct sdma_regs	sdma_regs[2];
-
-#define	SDMA_REGS_INIT(s, reg_base) {			\
-	(s)->sdc	= (reg_base) + SDMA_SDC;	\
-	(s)->sdcm	= (reg_base) + SDMA_SDCM;	\
-	(s)->rx_desc	= (reg_base) + SDMA_RX_DESC;	\
-	(s)->rx_buf_ptr = (reg_base) + SDMA_RX_BUF_PTR;	\
-	(s)->scrdp	= (reg_base) + SDMA_SCRDP;	\
-	(s)->tx_desc	= (reg_base) + SDMA_TX_DESC;	\
-	(s)->sctdp	= (reg_base) + SDMA_SCTDP;	\
-	(s)->sftdp	= (reg_base) + SDMA_SFTDP;	\
-}
-
-static u32	mpsc_base[2] = { MV64x60_MPSC_0_OFFSET, MV64x60_MPSC_1_OFFSET };
-
-struct mv64x60_rx_desc {
-	u16	bufsize;
-	u16	bytecnt;
-	u32	cmd_stat;
-	u32	next_desc_ptr;
-	u32	buffer;
-};
-
-struct mv64x60_tx_desc {
-	u16	bytecnt;
-	u16	shadow;
-	u32	cmd_stat;
-	u32	next_desc_ptr;
-	u32	buffer;
-};
-
-#define	MAX_RESET_WAIT	10000
-#define	MAX_TX_WAIT	10000
-
-#define	RX_NUM_DESC	2
-#define	TX_NUM_DESC	2
-
-#define	RX_BUF_SIZE	32
-#define	TX_BUF_SIZE	32
-
-static struct mv64x60_rx_desc rd[2][RX_NUM_DESC] __attribute__ ((aligned(32)));
-static struct mv64x60_tx_desc td[2][TX_NUM_DESC] __attribute__ ((aligned(32)));
-
-static char rx_buf[2][RX_NUM_DESC * RX_BUF_SIZE] __attribute__ ((aligned(32)));
-static char tx_buf[2][TX_NUM_DESC * TX_BUF_SIZE] __attribute__ ((aligned(32)));
-
-static int cur_rd[2] = { 0, 0 };
-static int cur_td[2] = { 0, 0 };
-
-static char chan_initialized[2] = { 0, 0 };
-
-
-#define	RX_INIT_RDP(rdp) {			\
-	(rdp)->bufsize = 2;			\
-	(rdp)->bytecnt = 0;			\
-	(rdp)->cmd_stat = SDMA_DESC_CMDSTAT_L | SDMA_DESC_CMDSTAT_F |	\
-		SDMA_DESC_CMDSTAT_O;	\
-}
-
-#ifdef CONFIG_MV64360
-static u32 cpu2mem_tab[MV64x60_CPU2MEM_WINDOWS][2] = {
-		{ MV64x60_CPU2MEM_0_BASE, MV64x60_CPU2MEM_0_SIZE },
-		{ MV64x60_CPU2MEM_1_BASE, MV64x60_CPU2MEM_1_SIZE },
-		{ MV64x60_CPU2MEM_2_BASE, MV64x60_CPU2MEM_2_SIZE },
-		{ MV64x60_CPU2MEM_3_BASE, MV64x60_CPU2MEM_3_SIZE }
-};
-
-static u32 com2mem_tab[MV64x60_CPU2MEM_WINDOWS][2] = {
-		{ MV64360_MPSC2MEM_0_BASE, MV64360_MPSC2MEM_0_SIZE },
-		{ MV64360_MPSC2MEM_1_BASE, MV64360_MPSC2MEM_1_SIZE },
-		{ MV64360_MPSC2MEM_2_BASE, MV64360_MPSC2MEM_2_SIZE },
-		{ MV64360_MPSC2MEM_3_BASE, MV64360_MPSC2MEM_3_SIZE }
-};
-
-static u32 dram_selects[MV64x60_CPU2MEM_WINDOWS] = { 0xe, 0xd, 0xb, 0x7 };
-#endif
-
-unsigned long
-serial_init(int chan, void *ignored)
-{
-	u32		mpsc_routing_base, sdma_base, brg_bcr, cdv;
-	int		i;
-
-	chan = (chan == 1); /* default to chan 0 if anything but 1 */
-
-	if (chan_initialized[chan])
-		return chan;
-
-	chan_initialized[chan] = 1;
-
-	if (chan == 0) {
-		sdma_base = MV64x60_SDMA_0_OFFSET;
-		brg_bcr = MV64x60_BRG_0_OFFSET + BRG_BCR;
-		SDMA_REGS_INIT(&sdma_regs[0], MV64x60_SDMA_0_OFFSET);
-	} else {
-		sdma_base = MV64x60_SDMA_1_OFFSET;
-		brg_bcr = MV64x60_BRG_1_OFFSET + BRG_BCR;
-		SDMA_REGS_INIT(&sdma_regs[0], MV64x60_SDMA_1_OFFSET);
-	}
-
-	mpsc_routing_base = MV64x60_MPSC_ROUTING_OFFSET;
-
-	stop_dma(chan);
-
-	/* Set up ring buffers */
-	for (i=0; i<RX_NUM_DESC; i++) {
-		RX_INIT_RDP(&rd[chan][i]);
-		rd[chan][i].buffer = (u32)&rx_buf[chan][i * RX_BUF_SIZE];
-		rd[chan][i].next_desc_ptr = (u32)&rd[chan][i+1];
-	}
-	rd[chan][RX_NUM_DESC - 1].next_desc_ptr = (u32)&rd[chan][0];
-
-	for (i=0; i<TX_NUM_DESC; i++) {
-		td[chan][i].bytecnt = 0;
-		td[chan][i].shadow = 0;
-		td[chan][i].buffer = (u32)&tx_buf[chan][i * TX_BUF_SIZE];
-		td[chan][i].cmd_stat = SDMA_DESC_CMDSTAT_F|SDMA_DESC_CMDSTAT_L;
-		td[chan][i].next_desc_ptr = (u32)&td[chan][i+1];
-	}
-	td[chan][TX_NUM_DESC - 1].next_desc_ptr = (u32)&td[chan][0];
-
-	/* Set MPSC Routing */
-	out_le32(mv64x60_base + mpsc_routing_base + MPSC_MRR, 0x3ffffe38);
-
-#ifdef CONFIG_GT64260
-	out_le32(mv64x60_base + GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102);
-#else /* Must be MV64360 or MV64460 */
-	{
-	u32	enables, prot_bits, v;
-
-	/* Set up comm unit to memory mapping windows */
-	/* Note: Assumes MV64x60_CPU2MEM_WINDOWS == 4 */
-
-	enables = in_le32(mv64x60_base + MV64360_CPU_BAR_ENABLE) & 0xf;
-	prot_bits = 0;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
-		if (!(enables & (1 << i))) {
-			v = in_le32(mv64x60_base + cpu2mem_tab[i][0]);
-			v = ((v & 0xffff) << 16) | (dram_selects[i] << 8);
-			out_le32(mv64x60_base + com2mem_tab[i][0], v);
-
-			v = in_le32(mv64x60_base + cpu2mem_tab[i][1]);
-			v = (v & 0xffff) << 16;
-			out_le32(mv64x60_base + com2mem_tab[i][1], v);
-
-			prot_bits |= (0x3 << (i << 1)); /* r/w access */
-		}
-	}
-
-	out_le32(mv64x60_base + MV64360_MPSC_0_REMAP, 0);
-	out_le32(mv64x60_base + MV64360_MPSC_1_REMAP, 0);
-	out_le32(mv64x60_base + MV64360_MPSC2MEM_ACC_PROT_0, prot_bits);
-	out_le32(mv64x60_base + MV64360_MPSC2MEM_ACC_PROT_1, prot_bits);
-	out_le32(mv64x60_base + MV64360_MPSC2MEM_BAR_ENABLE, enables);
-	}
-#endif
-
-	/* MPSC 0/1 Rx & Tx get clocks BRG0/1 */
-	out_le32(mv64x60_base + mpsc_routing_base + MPSC_RCRR, 0x00000100);
-	out_le32(mv64x60_base + mpsc_routing_base + MPSC_TCRR, 0x00000100);
-
-	/* clear pending interrupts */
-	out_le32(mv64x60_base + MV64x60_SDMA_INTR_OFFSET + SDMA_INTR_MASK, 0);
-
-	out_le32(mv64x60_base + SDMA_SCRDP + sdma_base, (int)&rd[chan][0]);
-	out_le32(mv64x60_base + SDMA_SCTDP + sdma_base,
-		(int)&td[chan][TX_NUM_DESC - 1]);
-	out_le32(mv64x60_base + SDMA_SFTDP + sdma_base,
-		(int)&td[chan][TX_NUM_DESC - 1]);
-
-	out_le32(mv64x60_base + SDMA_SDC + sdma_base,
-		SDMA_SDC_RFT | SDMA_SDC_SFM | SDMA_SDC_BLMR | SDMA_SDC_BLMT |
-		(3 << 12));
-
-	cdv = ((mv64x60_mpsc_clk_freq/(32*mv64x60_console_baud))-1);
-	out_le32(mv64x60_base + brg_bcr,
-		((mv64x60_mpsc_clk_src << 18) | (1 << 16) | cdv));
-
-	/* Put MPSC into UART mode, no null modem, 16x clock mode */
-	out_le32(mv64x60_base + MPSC_MMCRL + mpsc_base[chan], 0x000004c4);
-	out_le32(mv64x60_base + MPSC_MMCRH + mpsc_base[chan], 0x04400400);
-
-	out_le32(mv64x60_base + MPSC_CHR_1 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_9 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_10 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_3 + mpsc_base[chan], 4);
-	out_le32(mv64x60_base + MPSC_CHR_4 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_5 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_6 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_7 + mpsc_base[chan], 0);
-	out_le32(mv64x60_base + MPSC_CHR_8 + mpsc_base[chan], 0);
-
-	/* 8 data bits, 1 stop bit */
-	out_le32(mv64x60_base + MPSC_MPCR + mpsc_base[chan], (3 << 12));
-	out_le32(mv64x60_base + SDMA_SDCM + sdma_base, SDMA_SDCM_ERD);
-	out_le32(mv64x60_base + MPSC_CHR_2 + mpsc_base[chan], MPSC_CHR_2_EH);
-
-	udelay(100);
-
-	return chan;
-}
-
-static void
-stop_dma(int chan)
-{
-	int	i;
-
-	/* Abort MPSC Rx (aborting Tx messes things up) */
-	out_le32(mv64x60_base + MPSC_CHR_2 + mpsc_base[chan], MPSC_CHR_2_RA);
-
-	/* Abort SDMA Rx, Tx */
-	out_le32(mv64x60_base + sdma_regs[chan].sdcm,
-		SDMA_SDCM_AR | SDMA_SDCM_STD);
-
-	for (i=0; i<MAX_RESET_WAIT; i++) {
-		if ((in_le32(mv64x60_base + sdma_regs[chan].sdcm) &
-				(SDMA_SDCM_AR | SDMA_SDCM_AT)) == 0)
-			break;
-
-		udelay(100);
-	}
-}
-
-static int
-wait_for_ownership(int chan)
-{
-	int	i;
-
-	for (i=0; i<MAX_TX_WAIT; i++) {
-		if ((in_le32(mv64x60_base + sdma_regs[chan].sdcm) &
-				SDMA_SDCM_TXD) == 0)
-			break;
-
-		udelay(1000);
-	}
-
-	return (i < MAX_TX_WAIT);
-}
-
-void
-serial_putc(unsigned long com_port, unsigned char c)
-{
-	struct mv64x60_tx_desc	*tdp;
-
-	if (wait_for_ownership(com_port) == 0)
-		return;
-
-	tdp = &td[com_port][cur_td[com_port]];
-	if (++cur_td[com_port] >= TX_NUM_DESC)
-		cur_td[com_port] = 0;
-
-	*(unchar *)(tdp->buffer ^ 7) = c;
-	tdp->bytecnt = 1;
-	tdp->shadow = 1;
-	tdp->cmd_stat = SDMA_DESC_CMDSTAT_L | SDMA_DESC_CMDSTAT_F |
-		SDMA_DESC_CMDSTAT_O;
-
-	out_le32(mv64x60_base + sdma_regs[com_port].sctdp, (int)tdp);
-	out_le32(mv64x60_base + sdma_regs[com_port].sftdp, (int)tdp);
-	out_le32(mv64x60_base + sdma_regs[com_port].sdcm,
-		in_le32(mv64x60_base + sdma_regs[com_port].sdcm) |
-			SDMA_SDCM_TXD);
-}
-
-unsigned char
-serial_getc(unsigned long com_port)
-{
-	struct mv64x60_rx_desc	*rdp;
-	unchar			c = '\0';
-
-	rdp = &rd[com_port][cur_rd[com_port]];
-
-	if ((rdp->cmd_stat & (SDMA_DESC_CMDSTAT_O|SDMA_DESC_CMDSTAT_ES)) == 0) {
-		c = *(unchar *)(rdp->buffer ^ 7);
-		RX_INIT_RDP(rdp);
-		if (++cur_rd[com_port] >= RX_NUM_DESC)
-			cur_rd[com_port] = 0;
-	}
-
-	return c;
-}
-
-int
-serial_tstc(unsigned long com_port)
-{
-	struct mv64x60_rx_desc	*rdp;
-	int			loop_count = 0;
-	int			rc = 0;
-
-	rdp = &rd[com_port][cur_rd[com_port]];
-
-	/* Go through rcv descs until empty looking for one with data (no error)*/
-	while (((rdp->cmd_stat & SDMA_DESC_CMDSTAT_O) == 0) &&
-		(loop_count++ < RX_NUM_DESC)) {
-
-		/* If there was an error, reinit the desc & continue */
-		if ((rdp->cmd_stat & SDMA_DESC_CMDSTAT_ES) != 0) {
-			RX_INIT_RDP(rdp);
-			if (++cur_rd[com_port] >= RX_NUM_DESC)
-				cur_rd[com_port] = 0;
-			rdp = (struct mv64x60_rx_desc *)rdp->next_desc_ptr;
-		} else {
-			rc = 1;
-			break;
-		}
-	}
-
-	return rc;
-}
-
-void
-serial_close(unsigned long com_port)
-{
-	stop_dma(com_port);
-}
diff --git a/arch/ppc/boot/simple/openbios.c b/arch/ppc/boot/simple/openbios.c
deleted file mode 100644
index 6ff2701598f2..000000000000
--- a/arch/ppc/boot/simple/openbios.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright (c) 2005 DENX Software Engineering
- * Stefan Roese <sr@denx.de>
- *
- * Based on original work by
- *      2005 (c) SYSGO AG - g.jaeger@sysgo.com
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- *
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/ppcboot.h>
-#include <asm/ibm4xx.h>
-#include <asm/reg.h>
-#ifdef CONFIG_40x
-#include <asm/io.h>
-#endif
-
-#if defined(CONFIG_BUBINGA)
-#define BOARD_INFO_VECTOR       0xFFF80B50 /* openbios 1.19 moved this vector down  - armin */
-#else
-#define BOARD_INFO_VECTOR	0xFFFE0B50
-#endif
-
-#ifdef CONFIG_40x
-/* Supply a default Ethernet address for those eval boards that don't
- * ship with one.  This is an address from the MBX board I have, so
- * it is unlikely you will find it on your network.
- */
-static	ushort	def_enet_addr[] = { 0x0800, 0x3e26, 0x1559 };
-
-extern unsigned long timebase_period_ns;
-#endif /* CONFIG_40x */
-
-extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
-				       unsigned long cksum);
-
-/* We need to make sure that this is before the images to ensure
- * that it's in a mapped location. */
-bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));
-bd_t *hold_residual = &hold_resid_buf;
-
-typedef struct openbios_board_info {
-        unsigned char    bi_s_version[4];       /* Version of this structure */
-        unsigned char    bi_r_version[30];      /* Version of the IBM ROM */
-        unsigned int     bi_memsize;            /* DRAM installed, in bytes */
-#ifdef CONFIG_405EP
-        unsigned char    bi_enetaddr[2][6];     /* Local Ethernet MAC address */
-#else /* CONFIG_405EP */
-        unsigned char    bi_enetaddr[6];        /* Local Ethernet MAC address */
-#endif /* CONFIG_405EP */
-        unsigned char    bi_pci_enetaddr[6];    /* PCI Ethernet MAC address */
-        unsigned int     bi_intfreq;            /* Processor speed, in Hz */
-        unsigned int     bi_busfreq;            /* PLB Bus speed, in Hz */
-        unsigned int     bi_pci_busfreq;        /* PCI Bus speed, in Hz */
-#ifdef CONFIG_405EP
-        unsigned int     bi_opb_busfreq;        /* OPB Bus speed, in Hz */
-        unsigned int     bi_pllouta_freq;       /* PLL OUTA speed, in Hz */
-#endif /* CONFIG_405EP */
-} openbios_bd_t;
-
-void *
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		void *ign1, void *ign2)
-{
-#ifdef CONFIG_40x
-	openbios_bd_t *openbios_bd = NULL;
-	openbios_bd_t *(*get_board_info)(void) =
-		(openbios_bd_t *(*)(void))(*(unsigned long *)BOARD_INFO_VECTOR);
-
-	/*
-	 * On 40x platforms we not only need the MAC-addresses, but also the
-	 * clocks and memsize. Now try to get all values using the OpenBIOS
-	 * "get_board_info()" callback.
-	 */
-	if ((openbios_bd = get_board_info()) != NULL) {
-		/*
-		 * Copy bd_info from OpenBIOS struct into U-Boot struct
-		 * used by kernel
-		 */
-	        hold_residual->bi_memsize = openbios_bd->bi_memsize;
-	        hold_residual->bi_intfreq = openbios_bd->bi_intfreq;
-	        hold_residual->bi_busfreq = openbios_bd->bi_busfreq;
-	        hold_residual->bi_pci_busfreq = openbios_bd->bi_pci_busfreq;
-		memcpy(hold_residual->bi_pci_enetaddr, openbios_bd->bi_pci_enetaddr, 6);
-#ifdef CONFIG_405EP
-		memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr[0], 6);
-		memcpy(hold_residual->bi_enet1addr, openbios_bd->bi_enetaddr[1], 6);
-	        hold_residual->bi_opbfreq = openbios_bd->bi_opb_busfreq;
-	        hold_residual->bi_procfreq = openbios_bd->bi_pllouta_freq;
-#else /* CONFIG_405EP */
-		memcpy(hold_residual->bi_enetaddr, openbios_bd->bi_enetaddr, 6);
-#endif /* CONFIG_405EP */
-	} else {
-		/* Hmmm...better try to stuff some defaults.
-		 */
-		hold_residual->bi_memsize = 16 * 1024 * 1024;
-		hold_residual->bi_intfreq = 200000000;
-		hold_residual->bi_busfreq = 100000000;
-		hold_residual->bi_pci_busfreq = 66666666;
-
-		/*
-		 * Only supply one mac-address in this fallback
-		 */
-		memcpy(hold_residual->bi_enetaddr, (void *)def_enet_addr, 6);
-#ifdef CONFIG_405EP
-	        hold_residual->bi_opbfreq = 50000000;
-	        hold_residual->bi_procfreq = 200000000;
-#endif /* CONFIG_405EP */
-	}
-
-	timebase_period_ns = 1000000000 / hold_residual->bi_intfreq;
-#endif /* CONFIG_40x */
-
-#ifdef CONFIG_440GP
-	/* simply copy the MAC addresses */
-	memcpy(hold_residual->bi_enetaddr,  (char *)OPENBIOS_MAC_BASE, 6);
-	memcpy(hold_residual->bi_enet1addr, (char *)(OPENBIOS_MAC_BASE+OPENBIOS_MAC_OFFSET), 6);
-#endif /* CONFIG_440GP */
-
-	decompress_kernel(load_addr, num_words, cksum);
-
-	return (void *)hold_residual;
-}
diff --git a/arch/ppc/boot/simple/pci.c b/arch/ppc/boot/simple/pci.c
deleted file mode 100644
index b0f673c8b7d9..000000000000
--- a/arch/ppc/boot/simple/pci.c
+++ /dev/null
@@ -1,274 +0,0 @@
-/* Stand alone funtions for QSpan Tundra support.
- */
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/mpc8xx.h>
-
-extern void puthex(unsigned long val);
-extern void puts(const char *);
-
-/* To map PCI devices, you first write 0xffffffff into the device
- * base address registers.  When the register is read back, the
- * number of most significant '1' bits describes the amount of address
- * space needed for mapping.  If the most significant bit is not set,
- * either the device does not use that address register, or it has
- * a fixed address that we can't change.  After the address is assigned,
- * the command register has to be written to enable the card.
- */
-typedef struct {
-	u_char	pci_bus;
-	u_char	pci_devfn;
-	ushort	pci_command;
-	uint	pci_addrs[6];
-} pci_map_t;
-
-/* We should probably dynamically allocate these structures.
-*/
-#define MAX_PCI_DEVS	32
-int	pci_dev_cnt;
-pci_map_t	pci_map[MAX_PCI_DEVS];
-
-void pci_conf_write(int bus, int device, int func, int reg, uint writeval);
-void pci_conf_read(int bus, int device, int func, int reg, void *readval);
-void probe_addresses(int bus, int devfn);
-void map_pci_addrs(void);
-
-extern int
-qs_pci_read_config_byte(unsigned char bus, unsigned char dev_fn,
-			unsigned char offset, unsigned char *val);
-extern int
-qs_pci_read_config_word(unsigned char bus, unsigned char dev_fn,
-			unsigned char offset, unsigned short *val);
-extern int
-qs_pci_read_config_dword(unsigned char bus, unsigned char dev_fn,
-			 unsigned char offset, unsigned int *val);
-extern int
-qs_pci_write_config_byte(unsigned char bus, unsigned char dev_fn,
-			 unsigned char offset, unsigned char val);
-extern int
-qs_pci_write_config_word(unsigned char bus, unsigned char dev_fn,
-			 unsigned char offset, unsigned short val);
-extern int
-qs_pci_write_config_dword(unsigned char bus, unsigned char dev_fn,
-			  unsigned char offset, unsigned int val);
-
-
-/* This is a really stripped version of PCI bus scan.  All we are
- * looking for are devices that exist.
- */
-void
-pci_scanner(int addr_probe)
-{
-	unsigned int devfn, l, class, bus_number;
-	unsigned char hdr_type, is_multi;
-
-	is_multi = 0;
-	bus_number = 0;
-	for (devfn = 0; devfn < 0xff; ++devfn) {
-		/* The device numbers are comprised of upper 5 bits of
-		 * device number and lower 3 bits of multi-function number.
-		 */
-		if ((devfn & 7) && !is_multi) {
-			/* Don't scan multifunction addresses if this is
-			 * not a multifunction device.
-			 */
-			continue;
-		}
-
-		/* Read the header to determine card type.
-		*/
-		qs_pci_read_config_byte(bus_number, devfn, PCI_HEADER_TYPE,
-								&hdr_type);
-
-		/* If this is a base device number, check the header to
-		 * determine if it is mulifunction.
-		 */
-		if ((devfn & 7) == 0)
-			is_multi = hdr_type & 0x80;
-
-		/* Check to see if the board is really in the slot.
-		*/
-		qs_pci_read_config_dword(bus_number, devfn, PCI_VENDOR_ID, &l);
-		/* some broken boards return 0 if a slot is empty: */
-		if (l == 0xffffffff || l == 0x00000000 || l == 0x0000ffff ||
-							l == 0xffff0000) {
-			/* Nothing there.
-			*/
-			is_multi = 0;
-			continue;
-		}
-
-		/* If we are not performing an address probe,
-		 * just simply print out some information.
-		 */
-		if (!addr_probe) {
-			qs_pci_read_config_dword(bus_number, devfn,
-						PCI_CLASS_REVISION, &class);
-
-			class >>= 8;	    /* upper 3 bytes */
-
-#if 0
-			printf("Found (%3d:%d): vendor 0x%04x, device 0x%04x, class 0x%06x\n",
-				(devfn >> 3), (devfn & 7),
-				(l & 0xffff),  (l >> 16) & 0xffff, class);
-#else
-			puts("Found ("); puthex(devfn >> 3);
-			puts(":"); puthex(devfn & 7);
-			puts("): vendor "); puthex(l & 0xffff);
-			puts(", device "); puthex((l >> 16) & 0xffff);
-			puts(", class "); puthex(class); puts("\n");
-#endif
-		}
-		else {
-			/* If this is a "normal" device, build address list.
-			*/
-			if ((hdr_type & 0x7f) == PCI_HEADER_TYPE_NORMAL)
-				probe_addresses(bus_number, devfn);
-		}
-	}
-
-	/* Now map the boards.
-	*/
-	if (addr_probe)
-		map_pci_addrs();
-}
-
-/* Probe addresses for the specified device.  This is a destructive
- * operation because it writes the registers.
- */
-void
-probe_addresses(bus, devfn)
-{
-	int	i;
-	uint	pciaddr;
-	ushort	pcicmd;
-	pci_map_t	*pm;
-
-	if (pci_dev_cnt >= MAX_PCI_DEVS) {
-		puts("Too many PCI devices\n");
-		return;
-	}
-
-	pm = &pci_map[pci_dev_cnt++];
-
-	pm->pci_bus = bus;
-	pm->pci_devfn = devfn;
-
-	for (i=0; i<6; i++) {
-		qs_pci_write_config_dword(bus, devfn, PCI_BASE_ADDRESS_0 + (i * 4), -1);
-		qs_pci_read_config_dword(bus, devfn, PCI_BASE_ADDRESS_0 + (i * 4),
-								&pciaddr);
-		pm->pci_addrs[i] = pciaddr;
-		qs_pci_read_config_word(bus, devfn, PCI_COMMAND, &pcicmd);
-		pm->pci_command = pcicmd;
-	}
-}
-
-/* Map the cards into the PCI space.  The PCI has separate memory
- * and I/O spaces.  In addition, some memory devices require mapping
- * below 1M.  The least significant 4 bits of the address register
- * provide information.  If this is an I/O device, only the LS bit
- * is used to indicate that, so I/O devices can be mapped to a two byte
- * boundard.  Memory addresses can be mapped to a 32 byte boundary.
- * The QSpan implementations usually have a 1Gbyte space for each
- * memory and I/O spaces.
- *
- * This isn't a terribly fancy algorithm.  I just map the spaces from
- * the top starting with the largest address space.  When finished,
- * the registers are written and the card enabled.
- *
- * While the Tundra can map a large address space on most boards, we
- * need to be careful because it may overlap other devices (like IMMR).
- */
-#define MEMORY_SPACE_SIZE	0x20000000
-#define IO_SPACE_SIZE		0x20000000
-
-void
-map_pci_addrs()
-{
-	uint	pci_mem_top, pci_mem_low;
-	uint	pci_io_top;
-	uint	addr_mask, reg_addr, space;
-	int	i, j;
-	pci_map_t *pm;
-
-	pci_mem_top = MEMORY_SPACE_SIZE;
-	pci_io_top = IO_SPACE_SIZE;
-	pci_mem_low = (1 * 1024 * 1024);	/* Below one meg addresses */
-
-	/* We can't map anything more than the maximum space, but test
-	 * for it anyway to catch devices out of range.
-	 */
-	addr_mask = 0x80000000;
-
-	do {
-		space = (~addr_mask) + 1;	/* Size of the space */
-		for (i=0; i<pci_dev_cnt; i++) {
-			pm = &pci_map[i];
-			for (j=0; j<6; j++) {
-				/* If the MS bit is not set, this has either
-				 * already been mapped, or is not used.
-				 */
-				reg_addr = pm->pci_addrs[j];
-				if ((reg_addr & 0x80000000) == 0)
-					continue;
-				if (reg_addr & PCI_BASE_ADDRESS_SPACE_IO) {
-					if ((reg_addr & PCI_BASE_ADDRESS_IO_MASK) != addr_mask)
-						continue;
-					if (pci_io_top < space) {
-						puts("Out of PCI I/O space\n");
-					}
-					else {
-						pci_io_top -= space;
-						pm->pci_addrs[j] = pci_io_top;
-						pm->pci_command |= PCI_COMMAND_IO;
-					}
-				}
-				else {
-					if ((reg_addr & PCI_BASE_ADDRESS_MEM_MASK) != addr_mask)
-						continue;
-
-					/* Memory space.  Test if below 1M.
-					*/
-					if (reg_addr & PCI_BASE_ADDRESS_MEM_TYPE_1M) {
-						if (pci_mem_low < space) {
-							puts("Out of PCI 1M space\n");
-						}
-						else {
-							pci_mem_low -= space;
-							pm->pci_addrs[j] = pci_mem_low;
-						}
-					}
-					else {
-						if (pci_mem_top < space) {
-							puts("Out of PCI Mem space\n");
-						}
-						else {
-							pci_mem_top -= space;
-							pm->pci_addrs[j] = pci_mem_top;
-						}
-					}
-					pm->pci_command |= PCI_COMMAND_MEMORY;
-				}
-			}
-		}
-		addr_mask >>= 1;
-		addr_mask |= 0x80000000;
-	} while (addr_mask != 0xfffffffe);
-	
-	/* Now, run the list one more time and map everything.
-	*/
-	for (i=0; i<pci_dev_cnt; i++) {
-		pm = &pci_map[i];
-		for (j=0; j<6; j++) {
-			qs_pci_write_config_dword(pm->pci_bus, pm->pci_devfn,
-				PCI_BASE_ADDRESS_0 + (j * 4), pm->pci_addrs[j]);
-		}
-
-		/* Enable memory or address mapping.
-		*/
-		qs_pci_write_config_word(pm->pci_bus, pm->pci_devfn, PCI_COMMAND,
-			pm->pci_command);
-	}
-}
-
diff --git a/arch/ppc/boot/simple/pibs.c b/arch/ppc/boot/simple/pibs.c
deleted file mode 100644
index f39d01e0619d..000000000000
--- a/arch/ppc/boot/simple/pibs.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * 2004-2005 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <asm/ppcboot.h>
-#include <asm/ibm4xx.h>
-
-extern unsigned long decompress_kernel(unsigned long load_addr, int num_words,
-				       unsigned long cksum);
-
-/* We need to make sure that this is before the images to ensure
- * that it's in a mapped location. - Tom */
-bd_t hold_resid_buf __attribute__ ((__section__ (".data.boot")));
-bd_t *hold_residual = &hold_resid_buf;
-
-/* String functions lifted from lib/vsprintf.c and lib/ctype.c */
-unsigned char _ctype[] = {
-_C,_C,_C,_C,_C,_C,_C,_C,			/* 0-7 */
-_C,_C|_S,_C|_S,_C|_S,_C|_S,_C|_S,_C,_C,		/* 8-15 */
-_C,_C,_C,_C,_C,_C,_C,_C,			/* 16-23 */
-_C,_C,_C,_C,_C,_C,_C,_C,			/* 24-31 */
-_S|_SP,_P,_P,_P,_P,_P,_P,_P,			/* 32-39 */
-_P,_P,_P,_P,_P,_P,_P,_P,			/* 40-47 */
-_D,_D,_D,_D,_D,_D,_D,_D,			/* 48-55 */
-_D,_D,_P,_P,_P,_P,_P,_P,			/* 56-63 */
-_P,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U|_X,_U,	/* 64-71 */
-_U,_U,_U,_U,_U,_U,_U,_U,			/* 72-79 */
-_U,_U,_U,_U,_U,_U,_U,_U,			/* 80-87 */
-_U,_U,_U,_P,_P,_P,_P,_P,			/* 88-95 */
-_P,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L|_X,_L,	/* 96-103 */
-_L,_L,_L,_L,_L,_L,_L,_L,			/* 104-111 */
-_L,_L,_L,_L,_L,_L,_L,_L,			/* 112-119 */
-_L,_L,_L,_P,_P,_P,_P,_C,			/* 120-127 */
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,		/* 128-143 */
-0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,		/* 144-159 */
-_S|_SP,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,   /* 160-175 */
-_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,_P,       /* 176-191 */
-_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,_U,       /* 192-207 */
-_U,_U,_U,_U,_U,_U,_U,_P,_U,_U,_U,_U,_U,_U,_U,_L,       /* 208-223 */
-_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,_L,       /* 224-239 */
-_L,_L,_L,_L,_L,_L,_L,_P,_L,_L,_L,_L,_L,_L,_L,_L};      /* 240-255 */
-
-/**
- * simple_strtoull - convert a string to an unsigned long long
- * @cp: The start of the string
- * @endp: A pointer to the end of the parsed string will be placed here
- * @base: The number base to use
- */
-unsigned long long simple_strtoull(const char *cp,char **endp,unsigned int base)
-{
-	unsigned long long result = 0,value;
-
-	if (!base) {
-		base = 10;
-		if (*cp == '0') {
-			base = 8;
-			cp++;
-			if ((toupper(*cp) == 'X') && isxdigit(cp[1])) {
-				cp++;
-				base = 16;
-			}
-		}
-	} else if (base == 16) {
-		if (cp[0] == '0' && toupper(cp[1]) == 'X')
-			cp += 2;
-	}
-	while (isxdigit(*cp) && (value = isdigit(*cp) ? *cp-'0' : (islower(*cp)
-	    ? toupper(*cp) : *cp)-'A'+10) < base) {
-		result = result*base + value;
-		cp++;
-	}
-	if (endp)
-		*endp = (char *)cp;
-	return result;
-}
-
-void *
-load_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
-		void *ign1, void *ign2)
-{
-	unsigned long long mac64;
-
-	decompress_kernel(load_addr, num_words, cksum);
-
-	mac64 = simple_strtoull((char *)PIBS_MAC_BASE, 0, 16);
-	memcpy(hold_residual->bi_enetaddr, (char *)&mac64+2, 6);
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP)
-	mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET), 0, 16);
-	memcpy(hold_residual->bi_enet1addr, (char *)&mac64+2, 6);
-#endif
-#ifdef CONFIG_440GX
-	mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*2), 0, 16);
-	memcpy(hold_residual->bi_enet2addr, (char *)&mac64+2, 6);
-	mac64 = simple_strtoull((char *)(PIBS_MAC_BASE+PIBS_MAC_OFFSET*3), 0, 16);
-	memcpy(hold_residual->bi_enet3addr, (char *)&mac64+2, 6);
-#endif
-	return (void *)hold_residual;
-}
diff --git a/arch/ppc/boot/simple/prepmap.c b/arch/ppc/boot/simple/prepmap.c
deleted file mode 100644
index c871a4db6e8c..000000000000
--- a/arch/ppc/boot/simple/prepmap.c
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * 2004 (C) IBM. This file is licensed under the terms of the GNU General
- * Public License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <nonstdio.h>
-
-void board_isa_init(void)
-{
-	ISA_init(0x80000000);
-}
diff --git a/arch/ppc/boot/simple/qspan_pci.c b/arch/ppc/boot/simple/qspan_pci.c
deleted file mode 100644
index d2966d032a4c..000000000000
--- a/arch/ppc/boot/simple/qspan_pci.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * LinuxPPC arch/ppc/kernel/qspan_pci.c   Dan Malek (dmalek@jlc.net)
- *
- * QSpan Motorola bus to PCI bridge.  The config address register
- * is located 0x500 from the base of the bridge control/status registers.
- * The data register is located at 0x504.
- * This is a two step operation.  First, the address register is written,
- * then the data register is read/written as required.
- * I don't know what to do about interrupts (yet).
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <asm/mpc8xx.h>
-
-/*
- * When reading the configuration space, if something does not respond
- * the bus times out and we get a machine check interrupt.  So, the
- * good ol' exception tables come to mind to trap it and return some
- * value.
- *
- * On an error we just return a -1, since that is what the caller wants
- * returned if nothing is present.  I copied this from __get_user_asm,
- * with the only difference of returning -1 instead of EFAULT.
- * There is an associated hack in the machine check trap code.
- *
- * The QSPAN is also a big endian device, that is it makes the PCI
- * look big endian to us.  This presents a problem for the Linux PCI
- * functions, which assume little endian.  For example, we see the
- * first 32-bit word like this:
- *	------------------------
- *	| Device ID | Vendor ID |
- *	------------------------
- * If we read/write as a double word, that's OK.  But in our world,
- * when read as a word, device ID is at location 0, not location 2 as
- * the little endian PCI would believe.  We have to switch bits in
- * the PCI addresses given to us to get the data to/from the correct
- * byte lanes.
- *
- * The QSPAN only supports 4 bits of "slot" in the dev_fn instead of 5.
- * It always forces the MS bit to zero.  Therefore, dev_fn values
- * greater than 128 are returned as "no device found" errors.
- *
- * The QSPAN can only perform long word (32-bit) configuration cycles.
- * The "offset" must have the two LS bits set to zero.  Read operations
- * require we read the entire word and then sort out what should be
- * returned.  Write operations other than long word require that we
- * read the long word, update the proper word or byte, then write the
- * entire long word back.
- *
- * PCI Bridge hack.  We assume (correctly) that bus 0 is the primary
- * PCI bus from the QSPAN.  If we are called with a bus number other
- * than zero, we create a Type 1 configuration access that a downstream
- * PCI bridge will interpret.
- */
-
-#define __get_pci_config(x, addr, op)		\
-	__asm__ __volatile__(				\
-		"1:	"op" %0,0(%1)\n"		\
-		"	eieio\n"			\
-		"2:\n"					\
-		".section .fixup,\"ax\"\n"		\
-		"3:	li %0,-1\n"			\
-		"	b 2b\n"				\
-		".section __ex_table,\"a\"\n"		\
-		"	.align 2\n"			\
-		"	.long 1b,3b\n"			\
-		".text"					\
-		: "=r"(x) : "r"(addr))
-
-#define QS_CONFIG_ADDR	((volatile uint *)(PCI_CSR_ADDR + 0x500))
-#define QS_CONFIG_DATA	((volatile uint *)(PCI_CSR_ADDR + 0x504))
-
-#define mk_config_addr(bus, dev, offset) \
-	(((bus)<<16) | ((dev)<<8) | (offset & 0xfc))
-
-#define mk_config_type1(bus, dev, offset) \
-	mk_config_addr(bus, dev, offset) | 1;
-
-/* Initialize the QSpan device registers after power up.
-*/
-void
-qspan_init(void)
-{
-	uint	*qptr;
-
-
-
-	qptr = (uint *)PCI_CSR_ADDR;
-
-	/* PCI Configuration/status.  Upper bits written to clear
-	 * pending interrupt or status.  Lower bits enable QSPAN as
-	 * PCI master, enable memory and I/O cycles, and enable PCI
-	 * parity error checking.
-	 * IMPORTANT:  The last two bits of this word enable PCI
-	 * master cycles into the QBus.  The QSpan is broken and can't
-	 * meet the timing specs of the PQ bus for this to work.  Therefore,
-	 * if you don't have external bus arbitration, you can't use
-	 * this function.
-	 */
-#ifdef EXTERNAL_PQ_ARB
-	qptr[1] = 0xf9000147;
-#else
-	qptr[1] = 0xf9000144;
-#endif
-
-	/* PCI Misc configuration.  Set PCI latency timer resolution
-	 * of 8 cycles, set cache size to 4 x 32.
-	 */
-	qptr[3] = 0;
-
-	/* Set up PCI Target address mapping.  Enable, Posted writes,
-	 * 2Gbyte space (processor memory controller determines actual size).
-	 */
-	qptr[64] = 0x8f000080;
-
-	/* Map processor 0x80000000 to PCI 0x00000000.
-	 * Processor address bit 1 determines I/O type access (0x80000000)
-	 * or memory type access (0xc0000000).
-	 */
-	qptr[65] = 0x80000000;
-
-	/* Enable error logging and clear any pending error status.
-	*/
-	qptr[80] = 0x90000000;
-
-	qptr[512] = 0x000c0003;
-
-	/* Set up Qbus slave image.
-	*/
-	qptr[960] = 0x01000000;
-	qptr[961] = 0x000000d1;
-	qptr[964] = 0x00000000;
-	qptr[965] = 0x000000d1;
-
-}
-
-/* Functions to support PCI bios-like features to read/write configuration
- * space.  If the function fails for any reason, a -1 (0xffffffff) value
- * must be returned.
- */
-#define DEVICE_NOT_FOUND	(-1)
-#define SUCCESSFUL		0
-
-int qs_pci_read_config_byte(unsigned char bus, unsigned char dev_fn,
-				  unsigned char offset, unsigned char *val)
-{
-	uint	temp;
-	u_char	*cp;
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xff;
-		return DEVICE_NOT_FOUND;
-	}
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_pci_config(temp, QS_CONFIG_DATA, "lwz");
-
-	offset ^= 0x03;
-	cp = ((u_char *)&temp) + (offset & 0x03);
-	*val = *cp;
-	return SUCCESSFUL;
-}
-
-int qs_pci_read_config_word(unsigned char bus, unsigned char dev_fn,
-				  unsigned char offset, unsigned short *val)
-{
-	uint	temp;
-	ushort	*sp;
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xffff;
-		return DEVICE_NOT_FOUND;
-	}
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_pci_config(temp, QS_CONFIG_DATA, "lwz");
-	offset ^= 0x02;
-
-	sp = ((ushort *)&temp) + ((offset >> 1) & 1);
-	*val = *sp;
-	return SUCCESSFUL;
-}
-
-int qs_pci_read_config_dword(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned int *val)
-{
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xffffffff;
-		return DEVICE_NOT_FOUND;
-	}
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_pci_config(*val, QS_CONFIG_DATA, "lwz");
-	return SUCCESSFUL;
-}
-
-int qs_pci_write_config_byte(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned char val)
-{
-	uint	temp;
-	u_char	*cp;
-
-	if ((bus > 7) || (dev_fn > 127))
-		return DEVICE_NOT_FOUND;
-
-	qs_pci_read_config_dword(bus, dev_fn, offset, &temp);
-
-	offset ^= 0x03;
-	cp = ((u_char *)&temp) + (offset & 0x03);
-	*cp = val;
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*QS_CONFIG_DATA = temp;
-
-	return SUCCESSFUL;
-}
-
-int qs_pci_write_config_word(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned short val)
-{
-	uint	temp;
-	ushort	*sp;
-
-	if ((bus > 7) || (dev_fn > 127))
-		return DEVICE_NOT_FOUND;
-
-	qs_pci_read_config_dword(bus, dev_fn, offset, &temp);
-
-	offset ^= 0x02;
-	sp = ((ushort *)&temp) + ((offset >> 1) & 1);
-	*sp = val;
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*QS_CONFIG_DATA = temp;
-
-	return SUCCESSFUL;
-}
-
-int qs_pci_write_config_dword(unsigned char bus, unsigned char dev_fn,
-				    unsigned char offset, unsigned int val)
-{
-	if ((bus > 7) || (dev_fn > 127))
-		return DEVICE_NOT_FOUND;
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*(unsigned int *)QS_CONFIG_DATA = val;
-
-	return SUCCESSFUL;
-}
-
diff --git a/arch/ppc/boot/simple/relocate.S b/arch/ppc/boot/simple/relocate.S
deleted file mode 100644
index 1bbbcd2f2bcb..000000000000
--- a/arch/ppc/boot/simple/relocate.S
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * This is the common part of the loader relocation and initialization
- * process.  All of the board/processor specific initialization is
- * done before we get here.
- *
- * Author: Tom Rini
- *	   trini@mvista.com
- * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others).
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <asm/cache.h>
-#include <asm/ppc_asm.h>
-
-#define GETSYM(reg, sym)	\
-	lis	reg, sym@h; ori	reg, reg, sym@l
-
-	.text
-	/* We get called from the early initialization code.
-	 * Register 3 has the address where we were loaded,
-	 * Register 4 contains any residual data passed from the
-	 * boot rom.
-	 */
-	.globl	relocate
-relocate:
-	/* Save r3, r4 for later.
-	 * The r8/r11 are legacy registers so I don't have to
-	 * rewrite the code below :-).
-	 */
-	mr	r8, r3
-	mr	r11, r4
-
-	/* compute the size of the whole image in words. */
-	GETSYM(r4,start)
-	GETSYM(r5,end)
-
-	addi	r5,r5,3		/* round up */
-	sub	r5,r5,r4	/* end - start */
-	srwi	r5,r5,2
-	mr	r7,r5		/* Save for later use. */
-
-	/*
-	 * Check if we need to relocate ourselves to the link addr or were
-	 * we loaded there to begin with.
-	 */
-	cmpw	cr0,r3,r4
-	beq	start_ldr	/* If 0, we don't need to relocate */
-
-	/* Move this code somewhere safe.  This is max(load + size, end)
-	 * r8 == load address
-	 */
-	GETSYM(r4, start)
-	GETSYM(r5, end)
-
-	sub	r6,r5,r4
-	add	r6,r8,r6	/* r6 == phys(load + size) */
-
-	cmpw	r5,r6
-	bgt	1f
-	b	2f
-1:
-	mr	r6, r5
-2:
-	/* dest is in r6 */
-	/* Ensure alignment --- this code is precautionary */
-	addi	r6,r6,4
-	li	r5,0x0003
-	andc	r6,r6,r5
-
-	/* Find physical address and size of do_relocate */
-	GETSYM(r5, __relocate_start)
-	GETSYM(r4, __relocate_end)
-	GETSYM(r3, start)
-
-	/* Size to copy */
-	sub	r4,r4,r5
-	srwi	r4,r4,2
-
-	/* Src addr to copy (= __relocate_start - start + where_loaded) */
-	sub	r3,r5,r3
-	add	r5,r8,r3
-
-	/* Save dest */
-	mr	r3, r6
-
-	/* Do the copy */
-	mtctr	r4
-3:	lwz	r4,0(r5)
-	stw	r4,0(r3)
-	addi	r3,r3,4
-	addi	r5,r5,4
-	bdnz	3b
-
-	GETSYM(r4, __relocate_start)
-	GETSYM(r5, do_relocate)
-
-	sub	r4,r5,r4	/* Get entry point for do_relocate in */
-	add	r6,r6,r4	/* relocated section */
-
-	/* This will return to the relocated do_relocate */
-	mtlr	r6
-	b	flush_instruction_cache
-
-	.section ".relocate_code","xa"
-	
-do_relocate:
-	/* We have 2 cases --- start < load, or start > load
-	 * This determines whether we copy from the end, or the start.
-	 * Its easier to have 2 loops than to have paramaterised
-	 * loops.  Sigh.
-	 */
-	li	r6,0		/* Clear checksum */
-	mtctr	r7		/* Setup for a loop */
-	
-	GETSYM(r4, start)
-	mr	r3,r8		/* Get the load addr */
-
-	cmpw	cr0,r4,r3	/* If we need to copy from the end, do so */
-	bgt	do_relocate_from_end
-
-do_relocate_from_start:
-1:	lwz	r5,0(r3)	/* Load and decrement */
-	stw	r5,0(r4)	/* Store and decrement */
-	addi	r3,r3,4
-	addi	r4,r4,4
-	xor	r6,r6,r5	/* Update checksum */
-	bdnz	1b		/* Are we done? */
-	b	do_relocate_out	/* Finished */
-
-do_relocate_from_end:
-	GETSYM(r3, end)
-	slwi	r4,r7,2
-	add	r4,r8,r4	/* Get the physical end */
-1:	lwzu	r5,-4(r4)
-	stwu	r5, -4(r3)
-	xor	r6,r6,r5
-	bdnz	1b
-
-do_relocate_out:
-	GETSYM(r3,start_ldr)
-	mtlr	r3		/* Easiest way to do an absolute jump */
-/* Some boards don't boot up with the I-cache enabled.  Do that
- * now because the decompress runs much faster that way.
- * As a side effect, we have to ensure the data cache is not enabled
- * so we can access the serial I/O without trouble.
- */
-	b	flush_instruction_cache
-
-	.previous
-
-start_ldr:
-/* Clear all of BSS and set up stack for C calls */
-	lis	r3,__bss_start@h
-	ori	r3,r3,__bss_start@l
-	lis	r4,end@h
-	ori	r4,r4,end@l
-	subi	r3,r3,4
-	subi	r4,r4,4
-	li	r0,0
-50:	stwu	r0,4(r3)
-	cmpw	cr0,r3,r4
-	blt	50b
-90:	mr	r9,r1		/* Save old stack pointer (in case it matters) */
-	lis	r1,.stack@h
-	ori	r1,r1,.stack@l
-	addi	r1,r1,4096*2
-	subi	r1,r1,256
-	li	r2,0x000F	/* Mask pointer to 16-byte boundary */
-	andc	r1,r1,r2
-
-	/*
-	 * Exec kernel loader
-	 */
-	mr	r3,r8		/* Load point */
-	mr	r4,r7		/* Program length */
-	mr	r5,r6		/* Checksum */
-	mr	r6,r11		/* Residual data */
-	mr	r7,r25		/* Validated OFW interface */
-	bl	load_kernel
-
-	/*
-	 * Make sure the kernel knows we don't have things set in
-	 * registers.  -- Tom
-	 */
-	li	r4,0
-	li	r5,0
-	li	r6,0
-
-	/*
-	 * Start at the begining.
-	 */
-#ifdef CONFIG_PPC_PREP
-	li	r9,0xc
-	mtlr	r9
-	/* tell kernel we're prep, by putting 0xdeadc0de at KERNELLOAD,
-	 * and tell the kernel to start on the 4th instruction since we
-	 * overwrite the first 3 sometimes (which are 'nop').
-	 */
-	lis	r10,0xdeadc0de@h
-	ori	r10,r10,0xdeadc0de@l
-	li	r9,0
-	stw	r10,0(r9)
-#else
-	li	r9,0
-	mtlr	r9
-#endif
-	blr
-
-	.comm	.stack,4096*2,4
diff --git a/arch/ppc/boot/simple/rw4/ppc_40x.h b/arch/ppc/boot/simple/rw4/ppc_40x.h
deleted file mode 100644
index 561fb26f5a93..000000000000
--- a/arch/ppc/boot/simple/rw4/ppc_40x.h
+++ /dev/null
@@ -1,664 +0,0 @@
-/*----------------------------------------------------------------------------+
-|       This source code has been made available to you by IBM on an AS-IS
-|       basis.  Anyone receiving this source is licensed under IBM
-|       copyrights to use it in any way he or she deems fit, including
-|       copying it, modifying it, compiling it, and redistributing it either
-|       with or without modifications.  No license under IBM patents or
-|       patent applications is to be implied by the copyright license.
-|
-|       Any user of this software should understand that IBM cannot provide
-|       technical support for this software and will not be responsible for
-|       any consequences resulting from the use of this software.
-|
-|       Any person who transfers this source code or any derivative work
-|       must include the IBM copyright notice, this paragraph, and the
-|       preceding two paragraphs in the transferred software.
-|
-|       COPYRIGHT   I B M   CORPORATION 1997
-|       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
-+----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
-| Author:    Tony J. Cerreto
-| Component: Assembler include file.
-| File:      ppc_40x.h
-| Purpose:   Include file containing PPC DCR defines.
-|
-| Changes:
-| Date       Author  Comment
-| ---------  ------  --------------------------------------------------------
-| 01-Mar-00  tjc     Created
-+----------------------------------------------------------------------------*/
-/* added by linguohui*/
-#define MW
-/*----------------------------------------------------------------------------+
-| PPC Special purpose registers Numbers
-+----------------------------------------------------------------------------*/
-#define ccr0            0x3b3               /* core configuration reg        */
-#define ctr             0x009               /* count register                */
-#define ctrreg          0x009               /* count register                */
-#define dbcr0           0x3f2               /* debug control register 0      */
-#define dbcr1           0x3bd               /* debug control register 1      */
-#define dbsr            0x3f0               /* debug status register         */
-#define dccr            0x3fa               /* data cache control reg.       */
-#define dcwr            0x3ba               /* data cache write-thru reg     */
-#define dear            0x3d5               /* data exception address reg    */
-#define esr             0x3d4               /* exception syndrome register   */
-#define evpr            0x3d6               /* exception vector prefix reg   */
-#define iccr            0x3fb               /* instruction cache cntrl re    */
-#define icdbdr          0x3d3               /* instr cache dbug data reg     */
-#define lrreg           0x008               /* link register                 */
-#define pid             0x3b1               /* process id reg                */
-#define pit             0x3db               /* programmable interval time    */
-#define pvr             0x11f               /* processor version register    */
-#define sgr             0x3b9               /* storage guarded reg           */
-#define sler            0x3bb               /* storage little endian reg     */
-#define sprg0           0x110               /* special general purpose 0     */
-#define sprg1           0x111               /* special general purpose 1     */
-#define sprg2           0x112               /* special general purpose 2     */
-#define sprg3           0x113               /* special general purpose 3     */
-#define sprg4           0x114               /* special general purpose 4     */
-#define sprg5           0x115               /* special general purpose 5     */
-#define sprg6           0x116               /* special general purpose 6     */
-#define sprg7           0x117               /* special general purpose 7     */
-#define srr0            0x01a               /* save/restore register 0       */
-#define srr1            0x01b               /* save/restore register 1       */
-#define srr2            0x3de               /* save/restore register 2       */
-#define srr3            0x3df               /* save/restore register 3       */
-#define tbhi            0x11D
-#define tblo            0x11C
-#define tcr             0x3da               /* timer control register        */
-#define tsr             0x3d8               /* timer status register         */
-#define xerreg          0x001               /* fixed point exception         */
-#define xer             0x001               /* fixed point exception         */
-#define zpr             0x3b0               /* zone protection reg           */
-
-/*----------------------------------------------------------------------------+
-| Decompression Controller
-+----------------------------------------------------------------------------*/
-#define kiar            0x014               /* Decompression cntl addr reg   */
-#define kidr            0x015               /* Decompression cntl data reg   */
-#define kitor0          0x00                /* index table origin Reg 0      */
-#define kitor1          0x01                /* index table origin Reg 1      */
-#define kitor2          0x02                /* index table origin Reg 2      */
-#define kitor3          0x03                /* index table origin Reg 3      */
-#define kaddr0          0x04                /* addr decode Definition Reg 0  */
-#define kaddr1          0x05                /* addr decode Definition Reg 1  */
-#define kconf           0x40                /* Decompression cntl config reg */
-#define kid             0x41                /* Decompression cntl id reg     */
-#define kver            0x42                /* Decompression cntl ver number */
-#define kpear           0x50                /* bus error addr reg (PLB)      */
-#define kbear           0x51                /* bus error addr reg (DCP-EBC)  */
-#define kesr0           0x52                /* bus error status reg 0        */
-
-/*----------------------------------------------------------------------------+
-| Romeo Specific Device Control Register Numbers.
-+----------------------------------------------------------------------------*/
-#ifndef VESTA
-#define cdbcr           0x3d7                   /* cache debug cntrl reg     */
-
-#define a_latcnt        0x1a9                   /* PLB Latency count         */
-#define a_tgval         0x1ac                   /* tone generation value     */
-#define a_plb_pr        0x1bf                   /* PLB priority              */
-
-#define cic_sel1        0x031                   /* select register 1         */
-#define cic_sel2        0x032                   /* select register 2         */
-
-#define clkgcrst        0x122                   /* chip reset register */
-
-#define cp_cpmsr        0x100                   /*rstatus register           */
-#define cp_cpmer        0x101                   /* enable register           */
-
-#define dcp_kiar        0x190                   /* indirect address register */
-#define dcp_kidr        0x191                   /* indirect data register    */
-
-#define hsmc_mcgr       0x1c0                   /* HSMC global register      */
-#define hsmc_mcbesr     0x1c1                   /* bus error status register */
-#define hsmc_mcbear     0x1c2                   /* bus error address register*/
-#define hsmc_mcbr0      0x1c4                   /* SDRAM sub-ctrl bank reg 0 */
-#define hsmc_mccr0      0x1c5                   /* SDRAM sub-ctrl ctrl reg 0 */
-#define hsmc_mcbr1      0x1c7                   /* SDRAM sub-ctrl bank reg 1 */
-#define hsmc_mccr1      0x1c8                   /* SDRAM sub-ctrl ctrl reg 1 */
-#define hsmc_sysr       0x1d1                   /* system register           */
-#define hsmc_data       0x1d2                   /* data register             */
-#define hsmc_mccrr      0x1d3                   /* refresh register          */
-
-#define ocm_pbar        0x1E0                   /* base address register     */
-
-#define plb0_pacr0      0x057                   /* PLB arbiter control reg   */
-#define plb1_pacr1      0x067                   /* PLB arbiter control reg   */
-
-#define v_displb        0x157                   /* set left border of display*/
-#define v_disptb        0x158                   /* top border of display     */
-#define v_osd_la        0x159                   /* first link address for OSD*/
-#define v_ptsdlta       0x15E                   /* PTS delta register        */
-#define v_v0base        0x16C                   /* base mem add for VBI-0    */
-#define v_v1base        0x16D                   /* base mem add for VBI-1    */
-#define v_osbase        0x16E                   /* base mem add for OSD data */
-#endif
-
-/*----------------------------------------------------------------------------+
-| Vesta Device Control Register Numbers.
-+----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
-| Cross bar switch.
-+----------------------------------------------------------------------------*/
-#define cbs0_cr         0x010               /* CBS configuration register    */
-
-/*----------------------------------------------------------------------------+
-| DCR external master (DCRX).
-+----------------------------------------------------------------------------*/
-#define dcrx0_icr       0x020               /* internal control register     */
-#define dcrx0_isr       0x021               /* internal status register      */
-#define dcrx0_ecr       0x022               /* external control register     */
-#define dcrx0_esr       0x023               /* external status register      */
-#define dcrx0_tar       0x024               /* target address register       */
-#define dcrx0_tdr       0x025               /* target data register          */
-#define dcrx0_igr       0x026               /* interrupt generation register */
-#define dcrx0_bcr       0x027               /* buffer control register       */
-
-/*----------------------------------------------------------------------------+
-| Chip interconnect configuration.
-+----------------------------------------------------------------------------*/
-#define cic0_cr         0x030               /* CIC control register          */
-#define cic0_vcr        0x033               /* video macro control reg       */
-#define cic0_sel3       0x035               /* select register 3             */
-
-/*----------------------------------------------------------------------------+
-| Chip interconnect configuration.
-+----------------------------------------------------------------------------*/
-#define sgpo0_sgpO      0x036               /* simplified GPIO output        */
-#define sgpo0_gpod      0x037               /* simplified GPIO open drain    */
-#define sgpo0_gptc      0x038               /* simplified GPIO tristate cntl */
-#define sgpo0_gpi       0x039               /* simplified GPIO input         */
-
-/*----------------------------------------------------------------------------+
-| Universal interrupt controller.
-+----------------------------------------------------------------------------*/
-#define uic0_sr         0x040               /* status register               */
-#define uic0_srs        0x041               /* status register set           */
-#define uic0_er         0x042               /* enable register               */
-#define uic0_cr         0x043               /* critical register             */
-#define uic0_pr         0x044               /* parity register               */
-#define uic0_tr         0x045               /* triggering register           */
-#define uic0_msr        0x046               /* masked status register        */
-#define uic0_vr         0x047               /* vector register               */
-#define uic0_vcr        0x048               /* enable config register        */
-
-/*----------------------------------------------------------------------------+
-| PLB 0 and 1.
-+----------------------------------------------------------------------------*/
-#define pb0_pesr        0x054               /* PLB error status reg 0        */
-#define pb0_pesrs       0x055               /* PLB error status reg 0 set    */
-#define pb0_pear        0x056               /* PLB error address reg         */
-
-#define pb1_pesr        0x064               /* PLB error status reg 1        */
-#define pb1_pesrs       0x065               /* PLB error status reg 1 set    */
-#define pb1_pear        0x066               /* PLB error address reg         */
-
-/*----------------------------------------------------------------------------+
-| EBIU DCR registers.
-+----------------------------------------------------------------------------*/
-#define ebiu0_brcrh0    0x070               /* bus region register 0 high    */
-#define ebiu0_brcrh1    0x071               /* bus region register 1 high    */
-#define ebiu0_brcrh2    0x072               /* bus region register 2 high    */
-#define ebiu0_brcrh3    0x073               /* bus region register 3 high    */
-#define ebiu0_brcrh4    0x074               /* bus region register 4 high    */
-#define ebiu0_brcrh5    0x075               /* bus region register 5 high    */
-#define ebiu0_brcrh6    0x076               /* bus region register 6 high    */
-#define ebiu0_brcrh7    0x077               /* bus region register 7 high    */
-#define ebiu0_brcr0     0x080               /* bus region register 0         */
-#define ebiu0_brcr1     0x081               /* bus region register 1         */
-#define ebiu0_brcr2     0x082               /* bus region register 2         */
-#define ebiu0_brcr3     0x083               /* bus region register 3         */
-#define ebiu0_brcr4     0x084               /* bus region register 4         */
-#define ebiu0_brcr5     0x085               /* bus region register 5         */
-#define ebiu0_brcr6     0x086               /* bus region register 6         */
-#define ebiu0_brcr7     0x087               /* bus region register 7         */
-#define ebiu0_bear      0x090               /* bus error address register    */
-#define ebiu0_besr      0x091               /* bus error syndrome reg        */
-#define ebiu0_besr0s    0x093               /* bus error syndrome reg        */
-#define ebiu0_biucr     0x09a               /* bus interface control reg     */
-
-/*----------------------------------------------------------------------------+
-| OPB bridge.
-+----------------------------------------------------------------------------*/
-#define opbw0_gesr      0x0b0               /* error status reg              */
-#define opbw0_gesrs     0x0b1               /* error status reg              */
-#define opbw0_gear      0x0b2               /* error address reg             */
-
-/*----------------------------------------------------------------------------+
-| DMA.
-+----------------------------------------------------------------------------*/
-#define dma0_cr0        0x0c0               /* DMA channel control reg 0     */
-#define dma0_ct0        0x0c1               /* DMA count register 0          */
-#define dma0_da0        0x0c2               /* DMA destination addr reg 0    */
-#define dma0_sa0        0x0c3               /* DMA source addr register 0    */
-#define dma0_cc0        0x0c4               /* DMA chained count 0           */
-#define dma0_cr1        0x0c8               /* DMA channel control reg 1     */
-#define dma0_ct1        0x0c9               /* DMA count register 1          */
-#define dma0_da1        0x0ca               /* DMA destination addr reg 1    */
-#define dma0_sa1        0x0cb               /* DMA source addr register 1    */
-#define dma0_cc1        0x0cc               /* DMA chained count 1           */
-#define dma0_cr2        0x0d0               /* DMA channel control reg 2     */
-#define dma0_ct2        0x0d1               /* DMA count register 2          */
-#define dma0_da2        0x0d2               /* DMA destination addr reg 2    */
-#define dma0_sa2        0x0d3               /* DMA source addr register 2    */
-#define dma0_cc2        0x0d4               /* DMA chained count 2           */
-#define dma0_cr3        0x0d8               /* DMA channel control reg 3     */
-#define dma0_ct3        0x0d9               /* DMA count register 3          */
-#define dma0_da3        0x0da               /* DMA destination addr reg 3    */
-#define dma0_sa3        0x0db               /* DMA source addr register 3    */
-#define dma0_cc3        0x0dc               /* DMA chained count 3           */
-#define dma0_sr         0x0e0               /* DMA status register           */
-#define dma0_srs        0x0e1               /* DMA status register           */
-#define dma0_s1         0x031               /* DMA select1 register          */
-#define dma0_s2         0x032               /* DMA select2 register          */
-
-/*---------------------------------------------------------------------------+
-| Clock and power management.
-+----------------------------------------------------------------------------*/
-#define cpm0_fr         0x102               /* force register                */
-
-/*----------------------------------------------------------------------------+
-| Serial Clock Control.
-+----------------------------------------------------------------------------*/
-#define ser0_ccr        0x120               /* serial clock control register */
-
-/*----------------------------------------------------------------------------+
-| Audio Clock Control.
-+----------------------------------------------------------------------------*/
-#define aud0_apcr       0x121               /* audio clock ctrl register     */
-
-/*----------------------------------------------------------------------------+
-| DENC.
-+----------------------------------------------------------------------------*/
-#define denc0_idr       0x130               /* DENC ID register              */
-#define denc0_cr1       0x131               /* control register 1            */
-#define denc0_rr1       0x132               /* microvision 1 (reserved 1)    */
-#define denc0_cr2       0x133               /* control register 2            */
-#define denc0_rr2       0x134               /* microvision 2 (reserved 2)    */
-#define denc0_rr3       0x135               /* microvision 3 (reserved 3)    */
-#define denc0_rr4       0x136               /* microvision 4 (reserved 4)    */
-#define denc0_rr5       0x137               /* microvision 5 (reserved 5)    */
-#define denc0_ccdr      0x138               /* closed caption data           */
-#define denc0_cccr      0x139               /* closed caption control        */
-#define denc0_trr       0x13A               /* teletext request register     */
-#define denc0_tosr      0x13B               /* teletext odd field line se    */
-#define denc0_tesr      0x13C               /* teletext even field line s    */
-#define denc0_rlsr      0x13D               /* RGB rhift left register       */
-#define denc0_vlsr      0x13E               /* video level shift register    */
-#define denc0_vsr       0x13F               /* video scaling register        */
-
-/*----------------------------------------------------------------------------+
-| Video decoder.  Suspect 0x179, 0x169, 0x16a, 0x152 (rc).
-+----------------------------------------------------------------------------*/
-#define vid0_ccntl      0x140               /* control decoder operation     */
-#define vid0_cmode      0x141               /* video operational mode        */
-#define vid0_sstc0      0x142               /* STC high order bits 31:0      */
-#define vid0_sstc1      0x143               /* STC low order bit 32          */
-#define vid0_spts0      0x144               /* PTS high order bits 31:0      */
-#define vid0_spts1      0x145               /* PTS low order bit 32          */
-#define vid0_fifo       0x146               /* FIFO data port                */
-#define vid0_fifos      0x147               /* FIFO status                   */
-#define vid0_cmd        0x148               /* send command to decoder       */
-#define vid0_cmdd       0x149               /* port for command params       */
-#define vid0_cmdst      0x14A               /* command status                */
-#define vid0_cmdad      0x14B               /* command address               */
-#define vid0_procia     0x14C               /* instruction store             */
-#define vid0_procid     0x14D               /* data port for I_Store         */
-#define vid0_osdm       0x151               /* OSD mode control              */
-#define vid0_hosti      0x152               /* base interrupt register       */
-#define vid0_mask       0x153               /* interrupt mask register       */
-#define vid0_dispm      0x154               /* operational mode for Disp     */
-#define vid0_dispd      0x155               /* setting for 'Sync' delay      */
-#define vid0_vbctl      0x156               /* VBI                           */
-#define vid0_ttxctl     0x157               /* teletext control              */
-#define vid0_disptb     0x158               /* display left/top border       */
-#define vid0_osdgla     0x159               /* Graphics plane link addr      */
-#define vid0_osdila     0x15A               /* Image plane link addr         */
-#define vid0_rbthr      0x15B               /* rate buffer threshold         */
-#define vid0_osdcla     0x15C               /* Cursor link addr              */
-#define vid0_stcca      0x15D               /* STC common address            */
-#define vid0_ptsctl     0x15F               /* PTS Control                   */
-#define vid0_wprot      0x165               /* write protect for I_Store     */
-#define vid0_vcqa       0x167               /* video clip queued block Ad    */
-#define vid0_vcql       0x168               /* video clip queued block Le    */
-#define vid0_blksz      0x169               /* block size bytes for copy op  */
-#define vid0_srcad      0x16a               /* copy source address bits 6-31 */
-#define vid0_udbas      0x16B               /* base mem add for user data    */
-#define vid0_vbibas     0x16C               /* base mem add for VBI 0/1      */
-#define vid0_osdibas    0x16D               /* Image plane base address      */
-#define vid0_osdgbas    0x16E               /* Graphic plane base address    */
-#define vid0_rbbase     0x16F               /* base mem add for video buf    */
-#define vid0_dramad     0x170               /* DRAM address                  */
-#define vid0_dramdt     0x171               /* data port for DRAM access     */
-#define vid0_dramcs     0x172               /* DRAM command and statusa      */
-#define vid0_vcwa       0x173               /* v clip work address           */
-#define vid0_vcwl       0x174               /* v clip work length            */
-#define vid0_mseg0      0x175               /* segment address 0             */
-#define vid0_mseg1      0x176               /* segment address 1             */
-#define vid0_mseg2      0x177               /* segment address 2             */
-#define vid0_mseg3      0x178               /* segment address 3             */
-#define vid0_fbbase     0x179               /* frame buffer base memory      */
-#define vid0_osdcbas    0x17A               /* Cursor base addr              */
-#define vid0_lboxtb     0x17B               /* top left border               */
-#define vid0_trdly      0x17C               /* transparency gate delay       */
-#define vid0_sbord      0x17D               /* left/top small pict. bord.    */
-#define vid0_zoffs      0x17E               /* hor/ver zoom window           */
-#define vid0_rbsz       0x17F               /* rate buffer size read         */
-
-/*----------------------------------------------------------------------------+
-| Transport demultiplexer.
-+----------------------------------------------------------------------------*/
-#define xpt0_lr         0x180               /* demux location register       */
-#define xpt0_data       0x181               /* demux data register           */
-#define xpt0_ir         0x182               /* demux interrupt register      */
-
-#define xpt0_config1    0x0000              /* configuration 1               */
-#define xpt0_control1   0x0001              /* control 1                     */
-#define xpt0_festat     0x0002              /* Front-end status              */
-#define xpt0_feimask    0x0003              /* Front_end interrupt Mask      */
-#define xpt0_ocmcnfg    0x0004              /* OCM Address                   */
-#define xpt0_settapi    0x0005              /* Set TAP Interrupt             */
-
-#define xpt0_pcrhi      0x0010              /* PCR High                      */
-#define xpt0_pcrlow     0x0011              /* PCR Low                       */
-#define xpt0_lstchi     0x0012              /* Latched STC High              */
-#define xpt0_lstclow    0x0013              /* Latched STC Low               */
-#define xpt0_stchi      0x0014              /* STC High                      */
-#define xpt0_stclow     0x0015              /* STC Low                       */
-#define xpt0_pwm        0x0016              /* PWM                           */
-#define xpt0_pcrstct    0x0017              /* PCR-STC Threshold             */
-#define xpt0_pcrstcd    0x0018              /* PCR-STC Delta                 */
-#define xpt0_stccomp    0x0019              /* STC Compare                   */
-#define xpt0_stccmpd    0x001a              /* STC Compare Disarm            */
-
-#define xpt0_dsstat     0x0048              /* Descrambler Status            */
-#define xpt0_dsimask    0x0049              /* Descrambler Interrupt Mask    */
-
-#define xpt0_vcchng     0x01f0              /* Video Channel Change          */
-#define xpt0_acchng     0x01f1              /* Audio Channel Change          */
-#define xpt0_axenable   0x01fe              /* Aux PID Enables               */
-#define xpt0_pcrpid     0x01ff              /* PCR PID                       */
-
-#define xpt0_config2    0x1000              /* Configuration 2               */
-#define xpt0_pbuflvl    0x1002              /* Packet Buffer Level           */
-#define xpt0_intmask    0x1003              /* Interrupt Mask                */
-#define xpt0_plbcnfg    0x1004              /* PLB Configuration             */
-
-#define xpt0_qint       0x1010              /* Queues Interrupts             */
-#define xpt0_qintmsk    0x1011              /* Queues Interrupts Mask        */
-#define xpt0_astatus    0x1012              /* Audio Status                  */
-#define xpt0_aintmask   0x1013              /* Audio Interrupt Mask          */
-#define xpt0_vstatus    0x1014              /* Video Status                  */
-#define xpt0_vintmask   0x1015              /* Video Interrupt Mask          */
-
-#define xpt0_qbase      0x1020              /* Queue Base                    */
-#define xpt0_bucketq    0x1021              /* Bucket Queue                  */
-#define xpt0_qstops     0x1024              /* Queue Stops                   */
-#define xpt0_qresets    0x1025              /* Queue Resets                  */
-#define xpt0_sfchng     0x1026              /* Section Filter Change         */
-
-/*----------------------------------------------------------------------------+
-| Audio decoder. Suspect 0x1ad, 0x1b4, 0x1a3, 0x1a5 (read/write status)
-+----------------------------------------------------------------------------*/
-#define aud0_ctrl0      0x1a0               /* control 0                     */
-#define aud0_ctrl1      0x1a1               /* control 1                     */
-#define aud0_ctrl2      0x1a2               /* control 2                     */
-#define aud0_cmd        0x1a3               /* command register              */
-#define aud0_isr        0x1a4               /* interrupt status register     */
-#define aud0_imr        0x1a5               /* interrupt mask register       */
-#define aud0_dsr        0x1a6               /* decoder status register       */
-#define aud0_stc        0x1a7               /* system time clock             */
-#define aud0_csr        0x1a8               /* channel status register       */
-#define aud0_lcnt       0x1a9               /* queued address register 2     */
-#define aud0_pts        0x1aa               /* presentation time stamp       */
-#define aud0_tgctrl     0x1ab               /* tone generation control       */
-#define aud0_qlr2       0x1ac               /* queued length register 2      */
-#define aud0_auxd       0x1ad               /* aux data                      */
-#define aud0_strmid     0x1ae               /* stream ID                     */
-#define aud0_qar        0x1af               /* queued address register       */
-#define aud0_dsps       0x1b0               /* DSP status                    */
-#define aud0_qlr        0x1b1               /* queued len address            */
-#define aud0_dspc       0x1b2               /* DSP control                   */
-#define aud0_wlr2       0x1b3               /* working length register 2     */
-#define aud0_instd      0x1b4               /* instruction download          */
-#define aud0_war        0x1b5               /* working address register      */
-#define aud0_seg1       0x1b6               /* segment 1 base register       */
-#define aud0_seg2       0x1b7               /* segment 2 base register       */
-#define aud0_avf        0x1b9               /* audio att value front         */
-#define aud0_avr        0x1ba               /* audio att value rear          */
-#define aud0_avc        0x1bb               /* audio att value center        */
-#define aud0_seg3       0x1bc               /* segment 3 base register       */
-#define aud0_offset     0x1bd               /* offset address                */
-#define aud0_wrl        0x1be               /* working length register       */
-#define aud0_war2       0x1bf               /* working address register 2    */
-
-/*----------------------------------------------------------------------------+
-| High speed memory controller 0 and 1.
-+----------------------------------------------------------------------------*/
-#define hsmc0_gr        0x1e0               /* HSMC global register          */
-#define hsmc0_besr      0x1e1               /* bus error status register     */
-#define hsmc0_bear      0x1e2               /* bus error address register    */
-#define hsmc0_br0       0x1e4               /* SDRAM sub-ctrl bank reg 0     */
-#define hsmc0_cr0       0x1e5               /* SDRAM sub-ctrl ctrl reg 0     */
-#define hsmc0_br1       0x1e7               /* SDRAM sub-ctrl bank reg 1     */
-#define hsmc0_cr1       0x1e8               /* SDRAM sub-ctrl ctrl reg 1     */
-#define hsmc0_sysr      0x1f1               /* system register               */
-#define hsmc0_data      0x1f2               /* data register                 */
-#define hsmc0_crr       0x1f3               /* refresh register              */
-
-#define hsmc1_gr        0x1c0               /* HSMC global register          */
-#define hsmc1_besr      0x1c1               /* bus error status register     */
-#define hsmc1_bear      0x1c2               /* bus error address register    */
-#define hsmc1_br0       0x1c4               /* SDRAM sub-ctrl bank reg 0     */
-#define hsmc1_cr0       0x1c5               /* SDRAM sub-ctrl ctrl reg 0     */
-#define hsmc1_br1       0x1c7               /* SDRAM sub-ctrl bank reg 1     */
-#define hsmc1_cr1       0x1c8               /* SDRAM sub-ctrl ctrl reg 1     */
-#define hsmc1_sysr      0x1d1               /* system register               */
-#define hsmc1_data      0x1d2               /* data register                 */
-#define hsmc1_crr       0x1d3               /* refresh register              */
-
-/*----------------------------------------------------------------------------+
-| Machine State Register bit definitions.
-+----------------------------------------------------------------------------*/
-#define msr_ape         0x00100000
-#define msr_apa         0x00080000
-#define msr_we          0x00040000
-#define msr_ce          0x00020000
-#define msr_ile         0x00010000
-#define msr_ee          0x00008000
-#define msr_pr          0x00004000
-#define msr_me          0x00001000
-#define msr_de          0x00000200
-#define msr_ir          0x00000020
-#define msr_dr          0x00000010
-#define msr_le          0x00000001
-
-/*----------------------------------------------------------------------------+
-| Used during interrupt processing.
-+----------------------------------------------------------------------------*/
-#define stack_reg_image_size            160
-
-/*----------------------------------------------------------------------------+
-| Function prolog definition and other Metaware (EABI) defines.
-+----------------------------------------------------------------------------*/
-#ifdef MW
-
-#define r0              0
-#define r1              1
-#define r2              2
-#define r3              3
-#define r4              4
-#define r5              5
-#define r6              6
-#define r7              7
-#define r8              8
-#define r9              9
-#define r10             10
-#define r11             11
-#define r12             12
-#define r13             13
-#define r14             14
-#define r15             15
-#define r16             16
-#define r17             17
-#define r18             18
-#define r19             19
-#define r20             20
-#define r21             21
-#define r22             22
-#define r23             23
-#define r24             24
-#define r25             25
-#define r26             26
-#define r27             27
-#define r28             28
-#define r29             29
-#define r30             30
-#define r31             31
-
-#define cr0             0
-#define cr1             1
-#define cr2             2
-#define cr3             3
-#define cr4             4
-#define cr5             5
-#define cr6             6
-#define cr7             7
-
-#define function_prolog(func_name)      .text; \
-                                        .align  2; \
-                                        .globl  func_name; \
-                                        func_name:
-#define function_epilog(func_name)      .type func_name,@function; \
-                                        .size func_name,.-func_name
-
-#define function_call(func_name)        bl func_name
-
-#define stack_frame_min                 8
-#define stack_frame_bc                  0
-#define stack_frame_lr                  4
-#define stack_neg_off                   0
-
-#endif
-
-/*----------------------------------------------------------------------------+
-| Function prolog definition and other DIAB (Elf) defines.
-+----------------------------------------------------------------------------*/
-#ifdef ELF_DIAB
-
-fprolog:        macro   f_name
-                .text
-                .align  2
-                .globl  f_name
-f_name:
-                endm
-
-fepilog:        macro   f_name
-                .type   f_name,@function
-                .size   f_name,.-f_name
-                endm
-
-#define function_prolog(func_name)      fprolog func_name
-#define function_epilog(func_name)      fepilog func_name
-#define function_call(func_name)        bl func_name
-
-#define stack_frame_min                 8
-#define stack_frame_bc                  0
-#define stack_frame_lr                  4
-#define stack_neg_off                   0
-
-#endif
-
-/*----------------------------------------------------------------------------+
-| Function prolog definition and other Xlc (XCOFF) defines.
-+----------------------------------------------------------------------------*/
-#ifdef XCOFF
-
-.machine "403ga"
-
-#define r0              0
-#define r1              1
-#define r2              2
-#define r3              3
-#define r4              4
-#define r5              5
-#define r6              6
-#define r7              7
-#define r8              8
-#define r9              9
-#define r10             10
-#define r11             11
-#define r12             12
-#define r13             13
-#define r14             14
-#define r15             15
-#define r16             16
-#define r17             17
-#define r18             18
-#define r19             19
-#define r20             20
-#define r21             21
-#define r22             22
-#define r23             23
-#define r24             24
-#define r25             25
-#define r26             26
-#define r27             27
-#define r28             28
-#define r29             29
-#define r30             30
-#define r31             31
-
-#define cr0             0
-#define cr1             1
-#define cr2             2
-#define cr3             3
-#define cr4             4
-#define cr5             5
-#define cr6             6
-#define cr7             7
-
-#define function_prolog(func_name)      .csect .func_name[PR]; \
-                                        .globl .func_name[PR]; \
-                                        func_name:
-
-#define function_epilog(func_name)      .toc; \
-                                        .csect  func_name[DS]; \
-                                        .globl  func_name[DS]; \
-                                        .long   .func_name[PR]; \
-                                        .long   TOC[tc0]
-
-#define function_call(func_name)        .extern .func_name[PR]; \
-                                        stw     r2,stack_frame_toc(r1); \
-                                        mfspr   r2,sprg0; \
-                                        bl      .func_name[PR]; \
-                                        lwz     r2,stack_frame_toc(r1)
-
-#define stack_frame_min                 56
-#define stack_frame_bc                  0
-#define stack_frame_lr                  8
-#define stack_frame_toc                 20
-#define stack_neg_off                   276
-
-#endif
-#define function_prolog(func_name)      .text; \
-                                        .align  2; \
-                                        .globl  func_name; \
-                                        func_name:
-#define function_epilog(func_name)      .type func_name,@function; \
-                                        .size func_name,.-func_name
-
-#define function_call(func_name)        bl func_name
-
-/*----------------------------------------------------------------------------+
-| Function prolog definition for GNU
-+----------------------------------------------------------------------------*/
-#ifdef _GNU_TOOL
-
-#define function_prolog(func_name)      .globl  func_name; \
-                                        func_name:
-#define function_epilog(func_name)
-
-#endif
diff --git a/arch/ppc/boot/simple/rw4/rw4_init.S b/arch/ppc/boot/simple/rw4/rw4_init.S
deleted file mode 100644
index b1061962e46b..000000000000
--- a/arch/ppc/boot/simple/rw4/rw4_init.S
+++ /dev/null
@@ -1,78 +0,0 @@
-#define VESTA
-#include "ppc_40x.h"
-#
-        .align 2
-        .text
-#
-# added by linguohui
-        .extern   initb_ebiu0, initb_config, hdw_init_finish
-        .extern   initb_hsmc0, initb_hsmc1, initb_cache
-# end added
-       .globl    HdwInit
-#
-HdwInit:
-#
-#-----------------------------------------------------------------------*
-# If we are not executing from the FLASH get out                        *
-#-----------------------------------------------------------------------*
-# SAW keep this or comment out a la Hawthorne?
-# r3 contains NIP when used with Linux
-#        rlwinm r28, r3, 8, 24, 31    # if MSB == 0xFF -> FLASH address
-#        cmpwi  r28, 0xff
-#        bne    locn01
-#
-#
-#------------------------------------------------------------------------
-# Init_cpu. Bank registers are setup for the IBM STB.
-#------------------------------------------------------------------------
-#
-# Setup processor core clock to be driven off chip.  This is GPI4 bit
-# twenty.  Setup Open Drain, Output Select, Three-State Control,  and
-# Three-State Select registers.
-#
-
-
-        pb0pesr  =        0x054
-        pb0pear  =        0x056
-
-	mflr	r30
-
-#-----------------------------------------------------------------------------
-# Vectors will be at 0x1F000000
-# Dummy Machine check handler just does RFI before true handler gets installed
-#-----------------------------------------------------------------------------
-#if 1  /* xuwentao added*/
-#ifdef SDRAM16MB
-         lis     r10,0x0000
-	addi 	r10,r10,0x0000
-#else
-        lis      r10,0x1F00
-	addi	r10,r10,0x0000
-#endif
-
-        mtspr   evpr,r10              #EVPR: 0x0 or 0x1f000000 depending
-        isync                         # on SDRAM memory model used.
-
-        lis     r10,0xFFFF                # clear PB0_PESR because some
-        ori    r10,r10,0xFFFF            #  transitions from flash,changed by linguohui
-        mtdcr   pb0pesr,r10               #  to load RAM image via RiscWatch
-        lis     r10,0x0000                #  cause PB0_PESR machine checks
-        mtdcr   pb0pear,r10
-        addis   r10,r10,0x0000            # clear the
-        mtxer   r10                       #           XER just in case...
-#endif /* xuwentao*/
-
-        bl      initb_ebiu0                      # init EBIU
-
-        bl      initb_config                     # config PPC and board
-
-
-
-
-#------------------------------------------------------------------------
-# EVPR  setup moved to top of this function.
-#------------------------------------------------------------------------
-#
-	mtlr	r30
-	blr
-        .end
diff --git a/arch/ppc/boot/simple/rw4/rw4_init_brd.S b/arch/ppc/boot/simple/rw4/rw4_init_brd.S
deleted file mode 100644
index 386afdaad6c7..000000000000
--- a/arch/ppc/boot/simple/rw4/rw4_init_brd.S
+++ /dev/null
@@ -1,1125 +0,0 @@
-/*----------------------------------------------------------------------------+
-|       This source code has been made available to you by IBM on an AS-IS
-|       basis.  Anyone receiving this source is licensed under IBM
-|       copyrights to use it in any way he or she deems fit, including
-|       copying it, modifying it, compiling it, and redistributing it either
-|       with or without modifications.  No license under IBM patents or
-|       patent applications is to be implied by the copyright license.
-|
-|       Any user of this software should understand that IBM cannot provide
-|       technical support for this software and will not be responsible for
-|       any consequences resulting from the use of this software.
-|
-|       Any person who transfers this source code or any derivative work
-|       must include the IBM copyright notice, this paragraph, and the
-|       preceding two paragraphs in the transferred software.
-|
-|       COPYRIGHT   I B M   CORPORATION 1997
-|       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
-+----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
-| Author:    Tony J. Cerreto
-| Component: BSPS
-| File:      init_brd.s
-| Purpose:   Vesta Evaluation Board initialization subroutines.  The following
-|            routines are available:
-|              1. INITB_EBIU0:    Initialize EBIU0.
-|              2. INITB_CONFIG:   Configure board.
-|              3. INITB_HSMC0:    Initialize HSMC0 (SDRAM).
-|              4. INITB_HSMC1:    Initialize HSMC1 (SDRAM).
-|              5. INITB_CACHE:    Initialize Data and Instruction Cache.
-|              6. INITB_DCACHE:   Initialize Data Cache.
-|              7. INITB_ICACHE:   Initialize Instruction Cache.
-|              8. INITB_GET_CSPD: Get CPU Speed (Bus Speed and Processor Speed)
-|
-| Changes:
-| Date:      Author  Comment:
-| ---------  ------  --------
-| 01-Mar-00  tjc     Created
-| 04-Mar-00  jfh     Modified CIC_SEL3_VAL to support 1284 (Mux3 & GPIO 21-28)
-| 04-Mar-00  jfh     Modified XILINIX Reg 0 to support 1284 (Mux3 & GPIO 21-28)
-| 04-Mar-00  jfh     Modified XILINIX Reg 1 to support 1284 (Mux3 & GPIO 21-28)
-| 04-Mar-00  jfh     Modified XILINIX Reg 4 to support 1284 (Mux3 & GPIO 21-28)
-| 19-May-00  rlb     Relcoated HSMC0 to 0x1F000000 to support 32MB of contiguous
-|                    SDRAM space.  Changed cache ctl regs to reflect this.
-| 22-May-00  tjc     Changed initb_get_cspd interface and eliminated
-|                    initb_get_bspd routines.
-| 26-May-00  tjc     Added two nop instructions after all mtxxx/mfxxx
-|                    instructions due to PPC405 bug.
-+----------------------------------------------------------------------------*/
-#define VESTA
-#include "ppc_40x.h"
-#include "stb.h"
-
-/*----------------------------------------------------------------------------+
-| BOARD CONFIGURATION DEFINES
-+----------------------------------------------------------------------------*/
-#define CBS0_CR_VAL          0x00000002          /* CBS control reg value    */
-#define CIC0_CR_VAL          0xD0800448          /* CIC control reg value    */
-#define CIC0_SEL3_VAL        0x11500000          /* CIC select 3 reg value   */
-#define CIC0_VCR_VAL         0x00631700          /* CIC video cntl reg value */
-
-/*----------------------------------------------------------------------------+
-| EBIU0 BANK REGISTERS DEFINES
-+----------------------------------------------------------------------------*/
-#define EBIU0_BRCRH0_VAL     0x00000000          /* BR High 0 (Extension Reg)*/
-#define EBIU0_BRCRH1_VAL     0x00000000          /* BR High 1 (Extension Reg)*/
-#define EBIU0_BRCRH2_VAL     0x40000000          /* BR High 2 (Extension Reg)*/
-#define EBIU0_BRCRH3_VAL     0x40000000          /* BR High 3 (Extension Reg)*/
-#define EBIU0_BRCRH4_VAL     0x00000000          /* BR High 4 (Extension Reg)*/
-#define EBIU0_BRCRH5_VAL     0x00000000          /* BR High 5 (Extension Reg)*/
-#define EBIU0_BRCRH6_VAL     0x00000000          /* BR High 6 (Extension Reg)*/
-#define EBIU0_BRCRH7_VAL     0x40000000          /* BR High 7 (Extension Reg)*/
-
-#define EBIU0_BRCR0_VAL      0xFC58BFFE          /* BR 0: 16 bit Flash  4 MB */
-#define EBIU0_BRCR1_VAL      0xFF00BFFE          /* BR 1: Ext Connector 1 MB */
-#if 1
-#define EBIU0_BRCR2_VAL      0x207CFFBE          /* BR 2: Xilinx        8 MB */
-                                                 /* twt == 0x3f              */
-#else
-#define EBIU0_BRCR2_VAL      0x207CCFBE          /* BR 2: Xilinx        8 MB */
-                                                 /* twt == 0x0f              */
-#endif
-#define EBIU0_BRCR3_VAL      0x407CBFBE          /* BR 3: IDE Drive     8 MB */
-#define EBIU0_BRCR4_VAL      0xFF00BFFF          /* BR 4: Disabled.     0 MB */
-#define EBIU0_BRCR5_VAL      0xFF00BFFF          /* BR 5: Disabled.     0 MB */
-#define EBIU0_BRCR6_VAL      0xFF00BFFF          /* BR 6: Disabled.     0 MB */
-#define EBIU0_BRCR7_VAL      0xCE3F0003          /* BR 7: Line Mode DMA 2 MB */
-
-/*----------------------------------------------------------------------------+
-| GPIO DEFINES
-+----------------------------------------------------------------------------*/
-#define STB_GPIO0_OUTPUT     (STB_GPIO0_BASE_ADDRESS+ 0x00)
-#define STB_GPIO0_TC         (STB_GPIO0_BASE_ADDRESS+ 0x04)
-#define STB_GPIO0_OS_0_31    (STB_GPIO0_BASE_ADDRESS+ 0x08)
-#define STB_GPIO0_OS_32_63   (STB_GPIO0_BASE_ADDRESS+ 0x0C)
-#define STB_GPIO0_TS_0_31    (STB_GPIO0_BASE_ADDRESS+ 0x10)
-#define STB_GPIO0_TS_32_63   (STB_GPIO0_BASE_ADDRESS+ 0x14)
-#define STB_GPIO0_OD         (STB_GPIO0_BASE_ADDRESS+ 0x18)
-#define STB_GPIO0_INPUT      (STB_GPIO0_BASE_ADDRESS+ 0x1C)
-#define STB_GPIO0_R1         (STB_GPIO0_BASE_ADDRESS+ 0x20)
-#define STB_GPIO0_R2         (STB_GPIO0_BASE_ADDRESS+ 0x24)
-#define STB_GPIO0_R3         (STB_GPIO0_BASE_ADDRESS+ 0x28)
-#define STB_GPIO0_IS_1_0_31  (STB_GPIO0_BASE_ADDRESS+ 0x30)
-#define STB_GPIO0_IS_1_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x34)
-#define STB_GPIO0_IS_2_0_31  (STB_GPIO0_BASE_ADDRESS+ 0x38)
-#define STB_GPIO0_IS_2_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x3C)
-#define STB_GPIO0_IS_3_0_31  (STB_GPIO0_BASE_ADDRESS+ 0x40)
-#define STB_GPIO0_IS_3_32_63 (STB_GPIO0_BASE_ADDRESS+ 0x44)
-#define STB_GPIO0_SS_1       (STB_GPIO0_BASE_ADDRESS+ 0x50)
-#define STB_GPIO0_SS_2       (STB_GPIO0_BASE_ADDRESS+ 0x54)
-#define STB_GPIO0_SS_3       (STB_GPIO0_BASE_ADDRESS+ 0x58)
-
-#define GPIO0_TC_VAL         0x0C020004          /* three-state control val  */
-#define GPIO0_OS_0_31_VAL    0x51A00004          /* output select 0-31  val  */
-#define GPIO0_OS_32_63_VAL   0x0000002F          /* output select 32-63 val  */
-#define GPIO0_TS_0_31_VAL    0x51A00000          /* three-state sel 0-31  val*/
-#define GPIO0_TS_32_63_VAL   0x0000000F          /* three-state sel 32-63 val*/
-#define GPIO0_OD_VAL         0xC0000004          /* open drain val           */
-#define GPIO0_IS_1_0_31_VAL  0x50000151          /* input select 1 0-31  val */
-#define GPIO0_IS_1_32_63_VAL 0x00000000          /* input select 1 32-63 val */
-#define GPIO0_IS_2_0_31_VAL  0x00000000          /* input select 2 0-31  val */
-#define GPIO0_IS_2_32_63_VAL 0x00000000          /* input select 2 32-63 val */
-#define GPIO0_IS_3_0_31_VAL  0x00000440          /* input select 3 0-31  val */
-#define GPIO0_IS_3_32_63_VAL 0x00000000          /* input select 3 32-63 val */
-#define GPIO0_SS_1_VAL       0x00000000          /* sync select 1 val        */
-#define GPIO0_SS_2_VAL       0x00000000          /* sync select 2 val        */
-#define GPIO0_SS_3_VAL       0x00000000          /* sync select 3 val        */
-
-/*----------------------------------------------------------------------------+
-| XILINX DEFINES
-+----------------------------------------------------------------------------*/
-#define STB_XILINX_LED       (STB_FPGA_BASE_ADDRESS+ 0x0100)
-#define STB_XILINX1_REG0     (STB_FPGA_BASE_ADDRESS+ 0x40000)
-#define STB_XILINX1_REG1     (STB_FPGA_BASE_ADDRESS+ 0x40002)
-#define STB_XILINX1_REG2     (STB_FPGA_BASE_ADDRESS+ 0x40004)
-#define STB_XILINX1_REG3     (STB_FPGA_BASE_ADDRESS+ 0x40006)
-#define STB_XILINX1_REG4     (STB_FPGA_BASE_ADDRESS+ 0x40008)
-#define STB_XILINX1_REG5     (STB_FPGA_BASE_ADDRESS+ 0x4000A)
-#define STB_XILINX1_REG6     (STB_FPGA_BASE_ADDRESS+ 0x4000C)
-#define STB_XILINX1_ID       (STB_FPGA_BASE_ADDRESS+ 0x4000E)
-#define STB_XILINX1_FLUSH    (STB_FPGA_BASE_ADDRESS+ 0x4000E)
-#define STB_XILINX2_REG0     (STB_FPGA_BASE_ADDRESS+ 0x80000)
-#define STB_XILINX2_REG1     (STB_FPGA_BASE_ADDRESS+ 0x80002)
-#define STB_XILINX2_REG2     (STB_FPGA_BASE_ADDRESS+ 0x80004)
-
-#define XILINX1_R0_VAL       0x2440              /* Xilinx 1 Register 0 Val  */
-#define XILINX1_R1_VAL       0x0025              /* Xilinx 1 Register 1 Val  */
-#define XILINX1_R2_VAL       0x0441              /* Xilinx 1 Register 2 Val  */
-#define XILINX1_R3_VAL       0x0008              /* Xilinx 1 Register 3 Val  */
-#define XILINX1_R4_VAL       0x0100              /* Xilinx 1 Register 4 Val  */
-#define XILINX1_R5_VAL       0x6810              /* Xilinx 1 Register 5 Val  */
-#define XILINX1_R6_VAL       0x0000              /* Xilinx 1 Register 6 Val  */
-#if 0
-#define XILINX2_R0_VAL       0x0008              /* Xilinx 2 Register 0 Val  */
-#define XILINX2_R1_VAL       0x0000              /* Xilinx 2 Register 1 Val  */
-#else
-#define XILINX2_R0_VAL       0x0018              /* disable IBM IrDA RxD     */
-#define XILINX2_R1_VAL       0x0008              /* enable SICC MAX chip     */
-#endif
-#define XILINX2_R2_VAL       0x0000              /* Xilinx 2 Register 2 Val  */
-
-/*----------------------------------------------------------------------------+
-| HSMC BANK REGISTERS DEFINES
-+----------------------------------------------------------------------------*/
-#ifdef SDRAM16MB
-#define HSMC0_BR0_VAL        0x000D2D55          /* 0x1F000000-007FFFFF R/W  */
-#define HSMC0_BR1_VAL        0x008D2D55          /* 0x1F800000-1FFFFFFF R/W  */
-#else
-#define HSMC0_BR0_VAL        0x1F0D2D55          /* 0x1F000000-007FFFFF R/W  */
-#define HSMC0_BR1_VAL        0x1F8D2D55          /* 0x1F800000-1FFFFFFF R/W  */
-#endif
-#define HSMC1_BR0_VAL        0xA00D2D55          /* 0xA0000000-A07FFFFF R/W  */
-#define HSMC1_BR1_VAL        0xA08D2D55          /* 0xA0800000-A0FFFFFF R/W  */
-
-/*----------------------------------------------------------------------------+
-| CACHE DEFINES
-+----------------------------------------------------------------------------*/
-#define DCACHE_NLINES               128          /* no. D-cache lines        */
-#define DCACHE_NBYTES                32          /* no. bytes/ D-cache line  */
-#define ICACHE_NLINES               256          /* no. I-cache lines        */
-#define ICACHE_NBYTES                32          /* no. bytes/ I-cache line  */
-#ifdef SDRAM16MB
-#define DCACHE_ENABLE        0x80000000          /* D-cache regions to enable*/
-#define ICACHE_ENABLE        0x80000001          /* I-cache regions to enable*/
-#else
-#define DCACHE_ENABLE        0x18000000          /* D-cache regions to enable*/
-#define ICACHE_ENABLE        0x18000001          /* I-cache regions to enable*/
-#endif
-
-/*----------------------------------------------------------------------------+
-| CPU CORE SPEED CALCULATION DEFINES
-+----------------------------------------------------------------------------*/
-#define GCS_LCNT                 500000          /* CPU speed loop count     */
-#define GCS_TROW_BYTES                8          /* no. bytes in table row   */
-#define GCS_CTICK_TOL               100          /* allowable clock tick tol */
-#define GCS_NMULT                     4          /* no. of core speed mults  */
-
-        /*--------------------------------------------------------------------+
-        |        No. 13.5Mhz
-        |        Clock Ticks
-        |        based on a
-        |        loop count    Bus
-        |        of 100,000    Speed
-        +--------------------------------------------------------------------*/
-gcs_lookup_table:
-        .int           50000,  54000000          /* 54.0 Mhz                 */
-        .int           66667,  40500000          /* 40.5 Mhz                 */
-        .int           54545,  49500000          /* 49.5 Mhz                 */
-        .int           46154,  58500000          /* 58.5 Mhz                 */
-        .int               0,         0          /* end of table flag        */
-
-
-/*****************************************************************************+
-| XXXXXXX  XXX XXX   XXXXXX  XXXXXXX  XXXXXX   XX   XX     XX    XXXX
-|  XX   X   XX XX    X XX X   XX   X   XX  XX  XXX  XX    XXXX    XX
-|  XX X      XXX       XX     XX X     XX  XX  XXXX XX   XX  XX   XX
-|  XXXX       X        XX     XXXX     XXXXX   XX XXXX   XX  XX   XX
-|  XX X      XXX       XX     XX X     XX XX   XX  XXX   XXXXXX   XX
-|  XX   X   XX XX      XX     XX   X   XX  XX  XX   XX   XX  XX   XX  XX
-| XXXXXXX  XXX XXX    XXXX   XXXXXXX  XXX  XX  XX   XX   XX  XX  XXXXXXX
-+*****************************************************************************/
-/******************************************************************************
-|
-| Routine:    INITB_EBIU0.
-|
-| Purpose:    Initialize all the EBIU0 Bank Registers
-| Parameters: None.
-| Returns:    None.
-|
-******************************************************************************/
-        function_prolog(initb_ebiu0)
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 0
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR0_VAL@h
-        ori     r10,r10,EBIU0_BRCR0_VAL@l
-        mtdcr   ebiu0_brcr0,r10
-        lis     r10,EBIU0_BRCRH0_VAL@h
-        ori     r10,r10,EBIU0_BRCRH0_VAL@l
-        mtdcr   ebiu0_brcrh0,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 1
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR1_VAL@h
-        ori     r10,r10,EBIU0_BRCR1_VAL@l
-        mtdcr   ebiu0_brcr1,r10
-        lis     r10,EBIU0_BRCRH1_VAL@h
-        ori     r10,r10,EBIU0_BRCRH1_VAL@l
-        mtdcr   ebiu0_brcrh1,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 2
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR2_VAL@h
-        ori     r10,r10,EBIU0_BRCR2_VAL@l
-        mtdcr   ebiu0_brcr2,r10
-        lis     r10,EBIU0_BRCRH2_VAL@h
-        ori     r10,r10,EBIU0_BRCRH2_VAL@l
-        mtdcr   ebiu0_brcrh2,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 3
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR3_VAL@h
-        ori     r10,r10,EBIU0_BRCR3_VAL@l
-        mtdcr   ebiu0_brcr3,r10
-        lis     r10,EBIU0_BRCRH3_VAL@h
-        ori     r10,r10,EBIU0_BRCRH3_VAL@l
-        mtdcr   ebiu0_brcrh3,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 4
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR4_VAL@h
-        ori     r10,r10,EBIU0_BRCR4_VAL@l
-        mtdcr   ebiu0_brcr4,r10
-        lis     r10,EBIU0_BRCRH4_VAL@h
-        ori     r10,r10,EBIU0_BRCRH4_VAL@l
-        mtdcr   ebiu0_brcrh4,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 5
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR5_VAL@h
-        ori     r10,r10,EBIU0_BRCR5_VAL@l
-        mtdcr   ebiu0_brcr5,r10
-        lis     r10,EBIU0_BRCRH5_VAL@h
-        ori     r10,r10,EBIU0_BRCRH5_VAL@l
-        mtdcr   ebiu0_brcrh5,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 6
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR6_VAL@h
-        ori     r10,r10,EBIU0_BRCR6_VAL@l
-        mtdcr   ebiu0_brcr6,r10
-        lis     r10,EBIU0_BRCRH6_VAL@h
-        ori     r10,r10,EBIU0_BRCRH6_VAL@l
-        mtdcr   ebiu0_brcrh6,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set EBIU0 Bank 7
-        +--------------------------------------------------------------------*/
-        lis     r10,EBIU0_BRCR7_VAL@h
-        ori     r10,r10,EBIU0_BRCR7_VAL@l
-        mtdcr   ebiu0_brcr7,r10
-        lis     r10,EBIU0_BRCRH7_VAL@h
-        ori     r10,r10,EBIU0_BRCRH7_VAL@l
-        mtdcr   ebiu0_brcrh7,r10
-
-        blr
-        function_epilog(initb_ebiu0)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_CONFIG
-|
-| Purpose:    Configure the Vesta Evaluation Board.  The following items
-|             will be configured:
-|               1.  Cross-Bar Switch.
-|               2.  Chip Interconnect.
-|               3.  Clear/reset key PPC registers.
-|               4.  Xilinx and GPIO Registers.
-|
-| Returns:    None.
-|
-******************************************************************************/
-        function_prolog(initb_config)
-        /*--------------------------------------------------------------------+
-        |  Init CROSS-BAR SWITCH
-        +--------------------------------------------------------------------*/
-        lis     r10,CBS0_CR_VAL@h                /* r10 <- CBS Cntl Reg val  */
-        ori     r10,r10,CBS0_CR_VAL@l
-        mtdcr   cbs0_cr,r10
-
-        /*--------------------------------------------------------------------+
-        |  Init Chip-Interconnect (CIC) Registers
-        +--------------------------------------------------------------------*/
-        lis     r10,CIC0_CR_VAL@h                /* r10 <- CIC Cntl Reg val  */
-        ori     r10,r10,CIC0_CR_VAL@l
-        mtdcr   cic0_cr,r10
-
-        lis     r10,CIC0_SEL3_VAL@h              /* r10 <- CIC SEL3 Reg val  */
-        ori     r10,r10,CIC0_SEL3_VAL@l
-        mtdcr   cic0_sel3,r10
-
-        lis     r10,CIC0_VCR_VAL@h               /* r10 <- CIC Vid C-Reg val */
-        ori     r10,r10,CIC0_VCR_VAL@l
-        mtdcr   cic0_vcr,r10
-
-        /*--------------------------------------------------------------------+
-        | Clear SGR and DCWR
-        +--------------------------------------------------------------------*/
-        li      r10,0x0000
-        mtspr   sgr,r10
-        mtspr   dcwr,r10
-
-        /*--------------------------------------------------------------------+
-        | Clear/set up some machine state registers.
-        +--------------------------------------------------------------------*/
-        li      r10,0x0000                       /* r10 <- 0                 */
-        mtdcr   ebiu0_besr,r10                   /* clr Bus Err Syndrome Reg */
-        mtspr   esr,r10                          /* clr Exceptn Syndrome Reg */
-        mttcr   r10                              /* timer control register   */
-
-        mtdcr   uic0_er,r10                      /* disable all interrupts   */
-
-	/* UIC_IIC0 | UIC_IIC1 | UIC_U0 | UIC_IR_RCV | UIC_IR_XMIT */
-	lis	r10,    0x00600e00@h
-	ori	r10,r10,0x00600e00@l
-	mtdcr	uic0_pr,r10
-
-	li	r10,0x00000020			/* UIC_EIR1 */
-	mtdcr	uic0_tr,r10
-
-        lis     r10,0xFFFF                       /* r10 <- 0xFFFFFFFF        */
-        ori     r10,r10,0xFFFF                   /*                          */
-        mtdbsr  r10                              /* clear/reset the dbsr     */
-        mtdcr   uic0_sr,r10                      /* clear pending interrupts */
-
-        li      r10,0x1000                       /* set Machine Exception bit*/
-        oris    r10,r10,0x2                      /* set Criticl Exception bit*/
-        mtmsr   r10                              /* change MSR               */
-
-        /*--------------------------------------------------------------------+
-        |  Clear XER.
-        +--------------------------------------------------------------------*/
-        li      r10,0x0000
-        mtxer   r10
-
-        /*--------------------------------------------------------------------+
-        |  Init GPIO0 Registers
-        +--------------------------------------------------------------------*/
-        lis     r10,    STB_GPIO0_TC@h           /* Three-state control      */
-        ori     r10,r10,STB_GPIO0_TC@l
-        lis     r11,    GPIO0_TC_VAL@h
-        ori     r11,r11,GPIO0_TC_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_OS_0_31@h      /* output select 0-31       */
-        ori     r10,r10,STB_GPIO0_OS_0_31@l
-        lis     r11,    GPIO0_OS_0_31_VAL@h
-        ori     r11,r11,GPIO0_OS_0_31_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_OS_32_63@h     /* output select 32-63      */
-        ori     r10,r10,STB_GPIO0_OS_32_63@l
-        lis     r11,    GPIO0_OS_32_63_VAL@h
-        ori     r11,r11,GPIO0_OS_32_63_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_TS_0_31@h      /* three-state select 0-31  */
-        ori     r10,r10,STB_GPIO0_TS_0_31@l
-        lis     r11,    GPIO0_TS_0_31_VAL@h
-        ori     r11,r11,GPIO0_TS_0_31_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_TS_32_63@h     /* three-state select 32-63 */
-        ori     r10,r10,STB_GPIO0_TS_32_63@l
-        lis     r11,    GPIO0_TS_32_63_VAL@h
-        ori     r11,r11,GPIO0_TS_32_63_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_OD@h           /* open drain               */
-        ori     r10,r10,STB_GPIO0_OD@l
-        lis     r11,    GPIO0_OD_VAL@h
-        ori     r11,r11,GPIO0_OD_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_1_0_31@h    /* input select 1, 0-31     */
-        ori     r10,r10,STB_GPIO0_IS_1_0_31@l
-        lis     r11,    GPIO0_IS_1_0_31_VAL@h
-        ori     r11,r11,GPIO0_IS_1_0_31_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_1_32_63@h   /* input select 1, 32-63    */
-        ori     r10,r10,STB_GPIO0_IS_1_32_63@l
-        lis     r11,    GPIO0_IS_1_32_63_VAL@h
-        ori     r11,r11,GPIO0_IS_1_32_63_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_2_0_31@h    /* input select 2, 0-31     */
-        ori     r10,r10,STB_GPIO0_IS_2_0_31@l
-        lis     r11,    GPIO0_IS_2_0_31_VAL@h
-        ori     r11,r11,GPIO0_IS_2_0_31_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_2_32_63@h   /* input select 2, 32-63    */
-        ori     r10,r10,STB_GPIO0_IS_2_32_63@l
-        lis     r11,    GPIO0_IS_2_32_63_VAL@h
-        ori     r11,r11,GPIO0_IS_2_32_63_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_3_0_31@h    /* input select 3, 0-31     */
-        ori     r10,r10,STB_GPIO0_IS_3_0_31@l
-        lis     r11,    GPIO0_IS_3_0_31_VAL@h
-        ori     r11,r11,GPIO0_IS_3_0_31_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_IS_3_32_63@h   /* input select 3, 32-63    */
-        ori     r10,r10,STB_GPIO0_IS_3_32_63@l
-        lis     r11,    GPIO0_IS_3_32_63_VAL@h
-        ori     r11,r11,GPIO0_IS_3_32_63_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_SS_1@h         /* sync select 1            */
-        ori     r10,r10,STB_GPIO0_SS_1@l
-        lis     r11,    GPIO0_SS_1_VAL@h
-        ori     r11,r11,GPIO0_SS_1_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_SS_2@h         /* sync select 2            */
-        ori     r10,r10,STB_GPIO0_SS_2@l
-        lis     r11,    GPIO0_SS_2_VAL@h
-        ori     r11,r11,GPIO0_SS_2_VAL@l
-        stw     r11,0(r10)
-
-        lis     r10,    STB_GPIO0_SS_3@h         /* sync select 3            */
-        ori     r10,r10,STB_GPIO0_SS_3@l
-        lis     r11,    GPIO0_SS_3_VAL@h
-        ori     r11,r11,GPIO0_SS_3_VAL@l
-        stw     r11,0(r10)
-
-        /*--------------------------------------------------------------------+
-        |  Init Xilinx #1 Registers
-        +--------------------------------------------------------------------*/
-        lis     r10,    STB_XILINX1_REG0@h       /* init Xilinx1 Reg 0       */
-        ori     r10,r10,STB_XILINX1_REG0@l
-        li      r11,XILINX1_R0_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG1@h       /* init Xilinx1 Reg 1       */
-        ori     r10,r10,STB_XILINX1_REG1@l
-        li      r11,XILINX1_R1_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG2@h       /* init Xilinx1 Reg 2       */
-        ori     r10,r10,STB_XILINX1_REG2@l
-        li      r11,XILINX1_R2_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG3@h       /* init Xilinx1 Reg 3       */
-        ori     r10,r10,STB_XILINX1_REG3@l
-        li      r11,XILINX1_R3_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG4@h       /* init Xilinx1 Reg 4       */
-        ori     r10,r10,STB_XILINX1_REG4@l
-        li      r11,XILINX1_R4_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG5@h       /* init Xilinx1 Reg 5       */
-        ori     r10,r10,STB_XILINX1_REG5@l
-        li      r11,XILINX1_R5_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_REG6@h       /* init Xilinx1 Reg 6       */
-        ori     r10,r10,STB_XILINX1_REG6@l
-        li      r11,XILINX1_R6_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX1_FLUSH@h      /* latch registers in Xilinx*/
-        ori     r10,r10,STB_XILINX1_FLUSH@l
-        li      r11,0x0000
-        sth     r11,0(r10)
-
-        /*--------------------------------------------------------------------+
-        |  Init Xilinx #2 Registers
-        +--------------------------------------------------------------------*/
-        lis     r10,    STB_XILINX2_REG0@h       /* init Xilinx2 Reg 0       */
-        ori     r10,r10,STB_XILINX2_REG0@l
-        li      r11,XILINX2_R0_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX2_REG1@h       /* init Xilinx2 Reg 1       */
-        ori     r10,r10,STB_XILINX2_REG1@l
-        li      r11,XILINX2_R1_VAL
-        sth     r11,0(r10)
-
-        lis     r10,    STB_XILINX2_REG2@h       /* init Xilinx2 Reg 2       */
-        ori     r10,r10,STB_XILINX2_REG2@l
-        li      r11,XILINX2_R2_VAL
-        sth     r11,0(r10)
-
-        blr
-        function_epilog(initb_config)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_HSMC0.
-|
-| Purpose:    Initialize the HSMC0 Registers for SDRAM
-| Parameters: None.
-| Returns:    R3 =  0: Successful
-|                = -1: Unsuccessful, SDRAM did not reset properly.
-|
-******************************************************************************/
-        function_prolog(initb_hsmc0)
-        mflr    r0                               /* Save return addr         */
-
-        /*--------------------------------------------------------------------+
-        |  Set Global SDRAM Controller to recommended default
-        +--------------------------------------------------------------------*/
-        lis     r10,0x6C00
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_gr,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC0 Data Register to recommended default
-        +--------------------------------------------------------------------*/
-        lis     r10,0x0037
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_data,r10
-
-        /*--------------------------------------------------------------------+
-        |  Init HSMC0 Bank Register 0
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC0_BR0_VAL@h
-        ori     r10,r10,HSMC0_BR0_VAL@l
-        mtdcr   hsmc0_br0,r10
-
-        /*--------------------------------------------------------------------+
-        |  Init HSMC0 Bank Register 1
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC0_BR1_VAL@h
-        ori     r10,r10,HSMC0_BR1_VAL@l
-        mtdcr   hsmc0_br1,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC0 Control Reg 0
-        +--------------------------------------------------------------------*/
-        lis     r10,0x8077                       /* PRECHARGE ALL DEVICE BKS */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_cr0,r10
-        li      r3,0x0000
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     cr0,hsmc0_err
-
-        lis     r10,0x8078                       /* AUTO-REFRESH             */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_cr0,r10
-        li      r3,0x0000
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     cr0,hsmc0_err
-
-        lis     r10,0x8070                       /* PROG MODE W/DATA REG VAL */
-        ori     r10,r10,0x8000
-        mtdcr   hsmc0_cr0,r10
-        li      r3,0x0000
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc0_err
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC0 Control Reg 1
-        +--------------------------------------------------------------------*/
-        lis     r10,0x8077                       /* PRECHARGE ALL DEVICE BKS */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_cr1,r10
-        li      r3,0x0001
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     cr0,hsmc0_err
-
-        lis     r10,0x8078                       /* AUTO-REFRESH             */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_cr1,r10
-        li      r3,0x0001
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     cr0,hsmc0_err
-
-        lis     r10,0x8070                       /* PROG MODE W/DATA REG VAL */
-        ori     r10,r10,0x8000
-        mtdcr   hsmc0_cr1,r10
-        li      r3,0x0001
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     cr0,hsmc0_err
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC0 Refresh Register
-        +--------------------------------------------------------------------*/
-        lis     r10,0x0FE1
-        ori     r10,r10,0x0000
-        mtdcr   hsmc0_crr,r10
-        li      r3,0
-
-hsmc0_err:
-        mtlr    r0
-        blr
-        function_epilog(initb_hsmc0)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_HSMC1.
-|
-| Purpose:    Initialize the HSMC1 Registers for SDRAM
-| Parameters: None.
-| Returns:    R3 =  0: Successful
-|                = -1: Unsuccessful, SDRAM did not reset properly.
-|
-******************************************************************************/
-        function_prolog(initb_hsmc1)
-        mflr    r0                               /* Save return addr         */
-
-        /*--------------------------------------------------------------------+
-        |  Set Global SDRAM Controller to recommended default
-        +--------------------------------------------------------------------*/
-        lis     r10,0x6C00
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_gr,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC1 Data Register to recommended default
-        +--------------------------------------------------------------------*/
-        lis     r10,0x0037
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_data,r10
-
-        /*--------------------------------------------------------------------+
-        |  Init HSMC1 Bank Register 0
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC1_BR0_VAL@h
-        ori     r10,r10,HSMC1_BR0_VAL@l
-        mtdcr   hsmc1_br0,r10
-
-        /*--------------------------------------------------------------------+
-        |  Init HSMC1 Bank Register 1
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC1_BR1_VAL@h
-        ori     r10,r10,HSMC1_BR1_VAL@l
-        mtdcr   hsmc1_br1,r10
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC1 Control Reg 0
-        +--------------------------------------------------------------------*/
-        lis     r10,0x8077                       /* PRECHARGE ALL DEVICE BANKS    */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_cr0,r10
-        li      r3,0x0002
-        bl      hsmc_cr_wait                     /* wait for operation completion */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        lis     r10,0x8078                       /* AUTO-REFRESH                  */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_cr0,r10
-        li      r3,0x0002
-        bl      hsmc_cr_wait                     /* wait for operation completion */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        lis     r10,0x8070                       /* PROGRAM MODE W/DATA REG VALUE */
-        ori     r10,r10,0x8000
-        mtdcr   hsmc1_cr0,r10
-        li      r3,0x0002
-        bl      hsmc_cr_wait                     /* wait for operation completion */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC1 Control Reg 1
-        +--------------------------------------------------------------------*/
-        lis     r10,0x8077                       /* PRECHARGE ALL DEVICE BKS */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_cr1,r10
-        li      r3,0x0003
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        lis     r10,0x8078                       /* AUTO-REFRESH             */
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_cr1,r10
-        li      r3,0x0003
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        lis     r10,0x8070                       /* PROG MODE W/DATA REG VAL */
-        ori     r10,r10,0x8000
-        mtdcr   hsmc1_cr1,r10
-        li      r3,0x0003
-        bl      hsmc_cr_wait                     /* wait for op completion   */
-        cmpwi   cr0,r3,0x0000
-        bne     hsmc1_err
-
-        /*--------------------------------------------------------------------+
-        |  Set HSMC1 Refresh Register
-        +--------------------------------------------------------------------*/
-        lis     r10,0x0FE1
-        ori     r10,r10,0x0000
-        mtdcr   hsmc1_crr,r10
-        xor     r3,r3,r3
-
-hsmc1_err:
-        mtlr    r0
-        blr
-        function_epilog(initb_hsmc1)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_CACHE
-|
-| Purpose:    This routine will enable Data and Instruction Cache.
-|             The Data Cache is an 8K two-way set associative and the
-|             Instruction Cache is an 16K two-way set associative cache.
-|
-| Parameters: None.
-|
-| Returns:    None.
-|
-******************************************************************************/
-        function_prolog(initb_cache)
-        mflr    r0                               /* Save return addr         */
-
-        bl      initb_Dcache                     /* enable D-Cache           */
-        bl      initb_Icache                     /* enable I-Cache           */
-
-        mtlr    r0
-        blr
-       function_epilog(initb_cache)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_DCACHE
-|
-| Purpose:    This routine will invalidate all data in the Data Cache and
-|             then enable D-Cache.  If cache is enabled already, the D-Cache
-|             will be flushed before the data is invalidated.
-|
-| Parameters: None.
-|
-| Returns:    None.
-|
-******************************************************************************/
-        function_prolog(initb_Dcache)
-        /*--------------------------------------------------------------------+
-        |  Flush Data Cache if enabled
-        +--------------------------------------------------------------------*/
-        mfdccr  r10                              /* r10 <- DCCR              */
-        isync                                    /* ensure prev insts done   */
-        cmpwi   r10,0x00
-        beq     ic_dcinv                         /* D-cache off, invalidate  */
-
-        /*--------------------------------------------------------------------+
-        |  Data Cache enabled, force known memory addresses to be Cached
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC0_BR0_VAL@h              /* r10 <- first memory loc  */
-        andis.  r10,r10,0xFFF0
-        li      r11,DCACHE_NLINES                /* r11 <- # A-way addresses */
-        addi    r11,r11,DCACHE_NLINES            /* r11 <- # B-way addresses */
-        mtctr   r11                              /* set loop counter         */
-
-ic_dcload:
-        lwz     r12,0(r10)                       /* force cache of address   */
-        addi    r10,r10,DCACHE_NBYTES            /* r10 <- next memory loc   */
-        bdnz    ic_dcload
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Flush the known memory addresses from Cache
-        +--------------------------------------------------------------------*/
-        lis     r10,HSMC0_BR0_VAL@h              /* r10 <- first memory loc  */
-        andis.  r10,r10,0xFFF0
-        mtctr   r11                              /* set loop counter         */
-
-ic_dcflush:
-        dcbf    0,r10                            /* flush D-cache line       */
-        addi    r10,r10,DCACHE_NBYTES            /* r10 <- next memory loc   */
-        bdnz    ic_dcflush
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Disable then invalidate Data Cache
-        +--------------------------------------------------------------------*/
-        li      r10,0                            /* r10 <- 0                 */
-        mtdccr  r10                              /* disable the D-Cache      */
-        isync                                    /* ensure prev insts done   */
-
-ic_dcinv:
-        li      r10,0                            /* r10 <- line address      */
-        li      r11,DCACHE_NLINES                /* r11 <- # lines in cache  */
-        mtctr   r11                              /* set loop counter         */
-
-ic_dcloop:
-        dccci   0,r10                            /* invalidate A/B cache lns */
-        addi    r10,r10,DCACHE_NBYTES            /* bump to next line        */
-        bdnz    ic_dcloop
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Enable Data Cache
-        +--------------------------------------------------------------------*/
-        lis     r10,DCACHE_ENABLE@h              /* r10 <- D-cache enable msk*/
-        ori     r10,r10,DCACHE_ENABLE@l
-        mtdccr  r10
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        blr
-        function_epilog(initb_Dcache)
-
-
-/******************************************************************************
-|
-| Routine:    INITB_ICACHE
-|
-| Purpose:    This routine will invalidate all data in the Instruction
-|             Cache then enable I-Cache.
-|
-| Parameters: None.
-|
-| Returns:    None.
-|
-******************************************************************************/
-        function_prolog(initb_Icache)
-        /*--------------------------------------------------------------------+
-        |  Invalidate Instruction Cache
-        +--------------------------------------------------------------------*/
-        li      r10,0                            /* r10 <- lines address     */
-        iccci   0,r10                            /* invalidate all I-cache   */
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Enable Instruction Cache
-        +--------------------------------------------------------------------*/
-        lis     r10,ICACHE_ENABLE@h              /* r10 <- I-cache enable msk*/
-        ori     r10,r10,ICACHE_ENABLE@l
-        mticcr  r10
-        sync                                     /* ensure prev insts done   */
-        isync
-
-        blr
-        function_epilog(initb_Icache)
-
-#if 0
-/******************************************************************************
-|
-| Routine:    INITB_GET_CSPD
-|
-| Purpose:    Determine the CPU Core Speed.  The 13.5 Mhz Time Base
-|             Counter (TBC) is used to measure a conditional branch
-|             instruction.
-|
-| Parameters: R3 = Address of Bus Speed
-|             R4 = Address of Core Speed
-|
-| Returns:    (R3) = >0: Bus Speed.
-|                     0: Bus Speed not found in Look-Up Table.
-|             (R4) = >0: Core Speed.
-|                     0: Core Speed not found in Look-Up Table.
-|
-| Note:       1. This routine assumes the bdnz branch instruction takes
-|                two instruction cycles to complete.
-|             2. This routine must be called before interrupts are enabled.
-|
-******************************************************************************/
-        function_prolog(initb_get_cspd)
-        mflr    r0                               /* Save return address      */
-        /*--------------------------------------------------------------------+
-        |  Set-up timed loop
-        +--------------------------------------------------------------------*/
-        lis     r9,gcs_time_loop@h               /* r9  <- addr loop instr   */
-        ori     r9,r9,gcs_time_loop@l
-        lis     r10,GCS_LCNT@h                   /* r10 <- loop count        */
-        ori     r10,r10,GCS_LCNT@l
-        mtctr   r10                              /* ctr <- loop count        */
-        lis     r11,STB_TIMERS_TBC@h             /* r11 <- TBC register addr */
-        ori     r11,r11,STB_TIMERS_TBC@l
-        li      r12,0                            /* r12 <- 0                 */
-
-        /*--------------------------------------------------------------------+
-        |  Cache timed-loop instruction
-        +--------------------------------------------------------------------*/
-        icbt    0,r9
-        sync
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Get number of 13.5 Mhz cycles to execute time-loop
-        +--------------------------------------------------------------------*/
-        stw     r12,0(r11)                       /* reset TBC                */
-gcs_time_loop:
-        bdnz+   gcs_time_loop                    /* force branch pred taken  */
-        lwz     r5,0(r11)                        /* r5 <- num 13.5 Mhz ticks */
-        li      r6,5                             /* LUT based on 1/5th the...*/
-        divw    r5,r5,r6                         /*..loop count used         */
-        sync
-        isync
-
-        /*--------------------------------------------------------------------+
-        |  Look-up core speed based on TBC value
-        +--------------------------------------------------------------------*/
-        lis     r6,gcs_lookup_table@h            /* r6 <- pts at core spd LUT*/
-        ori     r6,r6,gcs_lookup_table@l
-        bl      gcs_cspd_lookup                  /* find core speed in LUT   */
-
-        mtlr    r0                               /* set return address       */
-        blr
-        function_epilog(initb_get_cspd)
-
-#endif
-/*****************************************************************************+
-| XXXX   XX   XX   XXXXXX  XXXXXXX  XXXXXX   XX   XX     XX    XXXX
-|  XX    XXX  XX   X XX X   XX   X   XX  XX  XXX  XX    XXXX    XX
-|  XX    XXXX XX     XX     XX X     XX  XX  XXXX XX   XX  XX   XX
-|  XX    XX XXXX     XX     XXXX     XXXXX   XX XXXX   XX  XX   XX
-|  XX    XX  XXX     XX     XX X     XX XX   XX  XXX   XXXXXX   XX
-|  XX    XX   XX     XX     XX   X   XX  XX  XX   XX   XX  XX   XX  XX
-| XXXX   XX   XX    XXXX   XXXXXXX  XXX  XX  XX   XX   XX  XX  XXXXXXX
-+*****************************************************************************/
-/******************************************************************************
-|
-| Routine:    HSMC_CR_WAIT
-|
-| Purpose:    Wait for the HSMC Control Register (bits 12-16) to be reset
-|             after an auto-refresh, pre-charge or program mode register
-|             command execution.
-|
-| Parameters: R3 = HSMC Control Register ID.
-|                  0: HSMC0 CR0
-|                  1: HSMC0 CR1
-|                  2: HSMC1 CR0
-|                  3: HSMC1 CR1
-|
-| Returns:    R3 = 0: Successful
-|                 -1: Unsuccessful
-|
-******************************************************************************/
-hsmc_cr_wait:
-
-        li      r11,10                           /* r11 <- retry counter     */
-        mtctr   r11                              /* set retry counter        */
-        mr      r11,r3                           /* r11 <- HSMC CR reg id    */
-
-hsmc_cr_rep:
-        bdz     hsmc_cr_err                      /* branch if max retries hit*/
-
-        /*--------------------------------------------------------------------+
-        |  GET HSMCx_CRx value based on HSMC Control Register ID
-        +--------------------------------------------------------------------*/
-try_hsmc0_cr0:                                   /* CHECK IF ID=HSMC0 CR0 REG*/
-        cmpwi   cr0,r11,0x0000
-        bne     cr0,try_hsmc0_cr1
-        mfdcr   r10,hsmc0_cr0                    /* r11 <- HSMC0 CR0 value   */
-        b       hsmc_cr_read
-
-try_hsmc0_cr1:                                   /* CHECK IF ID=HSMC0 CR1 REG*/
-        cmpwi   cr0,r11,0x0001
-        bne     cr0,try_hsmc1_cr0
-        mfdcr   r10,hsmc0_cr1                    /* r10 <- HSMC0 CR1 value   */
-        b       hsmc_cr_read
-
-try_hsmc1_cr0:                                   /* CHECK IF ID=HSMC1 CR0 REG*/
-        cmpwi   cr0,r11,0x0002
-        bne     cr0,try_hsmc1_cr1
-        mfdcr   r10,hsmc1_cr0                    /* r10 <- HSMC1 CR0 value   */
-        b       hsmc_cr_read
-
-try_hsmc1_cr1:                                   /* CHECK IF ID=HSMC1 CR1 REG*/
-        cmpwi   cr0,r11,0x0003
-        bne     cr0,hsmc_cr_err
-        mfdcr   r10,hsmc1_cr1                    /* r10 <- HSMC1 CR1 value   */
-
-        /*--------------------------------------------------------------------+
-        |  Check if HSMC CR register was reset after command execution
-        +--------------------------------------------------------------------*/
-hsmc_cr_read:
-        lis     r12,0x000F                       /* create "AND" mask        */
-        ori     r12,r12,0x8000
-        and.    r10,r10,r12                      /* r10 <- HSMC CR bits 12-16*/
-        bne     cr0,hsmc_cr_rep                  /* wait for bits to reset   */
-        li      r3,0                             /* set return code = success*/
-        b       hsmc_cr_done
-
-hsmc_cr_err:                                     /* ERROR: SDRAM didn't reset*/
-        li      r3,-1                            /* set RC=unsuccessful      */
-
-hsmc_cr_done:
-        blr
-
-#if 0
-/******************************************************************************
-|
-| Routine:    GCS_CSPD_LOOKUP
-|
-| Purpose:    Uses the number of 13.5 Mhz clock ticks found after executing
-|             the branch instruction time loop to look-up the CPU Core Speed
-|             in the Core Speed Look-up Table.
-|
-| Parameters: R3 = Address of Bus Speed
-|             R4 = Address of Core Speed
-|             R5 = Number of 13.5 Mhz clock ticks found in time loop.
-|             R6 = Pointer to Core-Speed Look-Up Table
-|
-| Returns:    (R3) = >0: Bus Speed.
-|                     0: Bus Speed not found in Look-Up Table.
-|             (R4) = >0: Core Speed.
-|                     0: Core Speed not found in Look-Up Table.
-|
-| Note:       Core Speed = Bus Speed * Mult Factor (1-4x).
-|
-******************************************************************************/
-gcs_cspd_lookup:
-
-        li      r9,1                             /* r9 <- core speed mult    */
-        /*--------------------------------------------------------------------+
-        |  Get theoritical number 13.5 Mhz ticks for a given Bus Speed from
-        |  Look-up Table.  Check all mult factors to determine if calculated
-        |  value matches theoretical value (within a tolerance).
-        +--------------------------------------------------------------------*/
-gcs_cspd_loop:
-        lwz     r10,0(r6)                        /* r10 <- no. ticks from LUT*/
-        divw    r10,r10,r9                       /* r10 <- div mult (1-4x)   */
-        subi    r11,r10,GCS_CTICK_TOL            /* r11 <- no. tks low range */
-        addi    r12,r10,GCS_CTICK_TOL            /* r12 <- no. tks high range*/
-
-        cmpw    cr0,r5,r11                       /* calc value within range? */
-        blt     gcs_cspd_retry                   /* less than low range      */
-        cmpw    cr0,r5,r12
-        bgt     gcs_cspd_retry                   /* greater than high range  */
-        b       gcs_cspd_fnd                     /* calc value within range  */
-
-        /*--------------------------------------------------------------------+
-        |  SO FAR CORE SPEED NOT FOUND: Check next mult factor
-        +--------------------------------------------------------------------*/
-gcs_cspd_retry:
-        addi    r9,r9,1                          /* bump mult factor (1-4x)  */
-        cmpwi   cr0,r9,GCS_NMULT
-        ble     gcs_cspd_loop
-
-        /*--------------------------------------------------------------------+
-        |  SO FAR CORE SPEED NOT FOUND: Point at next Bus Speed in LUT
-        +--------------------------------------------------------------------*/
-        li      r9,1                             /* reset mult factor        */
-        addi    r6,r6,GCS_TROW_BYTES             /* point at next table entry*/
-        lwz     r10,0(r6)
-        cmpwi   cr0,r10,0                        /* check for EOT flag       */
-        bne     gcs_cspd_loop
-
-        /*--------------------------------------------------------------------+
-        |  COMPUTE CORE SPEED AND GET BUS SPEED FROM LOOK-UP TABLE
-        +--------------------------------------------------------------------*/
-gcs_cspd_fnd:
-        lwz     r5,4(r6)                         /*  r5  <- Bus Speed in LUT */
-        mullw   r6,r5,r9                         /*  r6  <- Core speed       */
-        stw     r5,0(r3)                         /* (r3) <- Bus Speed        */
-        stw     r6,0(r4)                         /* (r4) <- Core Speed       */
-
-        blr
-#endif
diff --git a/arch/ppc/boot/simple/rw4/stb.h b/arch/ppc/boot/simple/rw4/stb.h
deleted file mode 100644
index 9afa5ab24d26..000000000000
--- a/arch/ppc/boot/simple/rw4/stb.h
+++ /dev/null
@@ -1,239 +0,0 @@
-/*----------------------------------------------------------------------------+
-|       This source code has been made available to you by IBM on an AS-IS
-|       basis.  Anyone receiving this source is licensed under IBM
-|       copyrights to use it in any way he or she deems fit, including
-|       copying it, modifying it, compiling it, and redistributing it either
-|       with or without modifications.  No license under IBM patents or
-|       patent applications is to be implied by the copyright license.
-|
-|       Any user of this software should understand that IBM cannot provide
-|       technical support for this software and will not be responsible for
-|       any consequences resulting from the use of this software.
-|
-|       Any person who transfers this source code or any derivative work
-|       must include the IBM copyright notice, this paragraph, and the
-|       preceding two paragraphs in the transferred software.
-|
-|       COPYRIGHT   I B M   CORPORATION 1999
-|       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M
-+----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
-| Author: Maciej P. Tyrlik
-| Component: Include file.
-| File: stb.h
-| Purpose: Common Set-tob-box definitions.
-| Changes:
-| Date:         Comment:
-| -----         --------
-| 14-Jan-97     Created for ElPaso pass 1                                   MPT
-| 13-May-97     Added function prototype and global variables               MPT
-| 08-Dec-98     Added RAW IR task information                               MPT
-| 19-Jan-99     Port to Romeo                                               MPT
-| 19-May-00     Changed SDRAM to 32MB contiguous 0x1F000000 - 0x20FFFFFF    RLB
-+----------------------------------------------------------------------------*/
-
-#ifndef _stb_h_
-#define _stb_h_
-
-/*----------------------------------------------------------------------------+
-| Read/write from I/O macros.
-+----------------------------------------------------------------------------*/
-#define inbyte(port)            (*((unsigned char volatile *)(port)))
-#define outbyte(port,data)      *(unsigned char volatile *)(port)=\
-                                (unsigned char)(data)
-
-#define inshort(port)           (*((unsigned short volatile *)(port)))
-#define outshort(port,data)     *(unsigned short volatile *)(port)=\
-                                (unsigned short)(data)
-
-#define inword(port)            (*((unsigned long volatile *)(port)))
-#define outword(port,data)      *(unsigned long volatile *)(port)=\
-                                (unsigned long)(data)
-
-/*----------------------------------------------------------------------------+
-| STB interrupts.
-+----------------------------------------------------------------------------*/
-#define STB_XP_TP_INT           0
-#define STB_XP_APP_INT          1
-#define STB_AUD_INT             2
-#define STB_VID_INT             3
-#define STB_DMA0_INT            4
-#define STB_DMA1_INT            5
-#define STB_DMA2_INT            6
-#define STB_DMA3_INT            7
-#define STB_SCI_INT             8
-#define STB_I2C1_INT            9
-#define STB_I2C2_INT            10
-#define STB_GPT_PWM0            11
-#define STB_GPT_PWM1            12
-#define STB_SCP_INT             13
-#define STB_SSP_INT             14
-#define STB_GPT_PWM2            15
-#define STB_EXT5_INT            16
-#define STB_EXT6_INT            17
-#define STB_EXT7_INT            18
-#define STB_EXT8_INT            19
-#define STB_SCC_INT             20
-#define STB_SICC_RECV_INT       21
-#define STB_SICC_TRAN_INT       22
-#define STB_PPU_INT             23
-#define STB_DCRX_INT            24
-#define STB_EXT0_INT            25
-#define STB_EXT1_INT            26
-#define STB_EXT2_INT            27
-#define STB_EXT3_INT            28
-#define STB_EXT4_INT            29
-#define STB_REDWOOD_ENET_INT    STB_EXT1_INT
-
-/*----------------------------------------------------------------------------+
-| STB tasks, task stack sizes, and task priorities.  The actual task priority
-| is 1 more than the specified number since priority 0 is reserved (system
-| internally adds 1 to supplied priority number).
-+----------------------------------------------------------------------------*/
-#define STB_IDLE_TASK_SS        (5* 1024)
-#define STB_IDLE_TASK_PRIO      0
-#define STB_LEDTEST_SS          (2* 1024)
-#define STB_LEDTEST_PRIO        0
-#define STB_CURSOR_TASK_SS      (10* 1024)
-#define STB_CURSOR_TASK_PRIO    7
-#define STB_MPEG_TASK_SS        (10* 1024)
-#define STB_MPEG_TASK_PRIO      9
-#define STB_DEMUX_TASK_SS       (10* 1024)
-#define STB_DEMUX_TASK_PRIO     20
-#define RAW_STB_IR_TASK_SS      (10* 1024)
-#define RAW_STB_IR_TASK_PRIO    20
-
-#define STB_SERIAL_ER_TASK_SS   (10* 1024)
-#define STB_SERIAL_ER_TASK_PRIO 1
-#define STB_CA_TASK_SS          (10* 1024)
-#define STB_CA_TASK_PRIO        8
-
-#define INIT_DEFAULT_VIDEO_SS   (10* 1024)
-#define INIT_DEFAULT_VIDEO_PRIO 8
-#define INIT_DEFAULT_SERVI_SS   (10* 1024)
-#define INIT_DEFAULT_SERVI_PRIO 8
-#define INIT_DEFAULT_POST_SS    (10* 1024)
-#define INIT_DEFAULT_POST_PRIO  8
-#define INIT_DEFAULT_INTER_SS   (10* 1024)
-#define INIT_DEFAULT_INTER_PRIO 8
-#define INIT_DEFAULT_BR_SS      (10* 1024)
-#define INIT_DEFAULT_BR_PRIO    8
-#define INITIAL_TASK_STACK_SIZE (32* 1024)
-
-#ifdef VESTA
-/*----------------------------------------------------------------------------+
-| Vesta Overall Address Map (all addresses are double mapped, bit 0 of the
-| address is not decoded.  Numbers below are dependent on board configuration.
-| FLASH, SDRAM, DRAM numbers can be affected by actual board setup.
-|
-|    FFE0,0000 - FFFF,FFFF        FLASH
-|    F200,0000 - F210,FFFF        FPGA logic
-|                                   Ethernet       = F200,0000
-|                                   LED Display    = F200,0100
-|                                   Xilinx #1 Regs = F204,0000
-|                                   Xilinx #2 Regs = F208,0000
-|                                   Spare          = F20C,0000
-|                                   IDE CS0        = F210,0000
-|    F410,0000 - F410,FFFF        IDE CS1
-|    C000,0000 - C7FF,FFFF        OBP
-|    C000,0000 - C000,0014        SICC  (16550 + infra red)
-|    C001,0000 - C001,0018        PPU   (Parallel Port)
-|    C002,0000 - C002,001B        SC0   (Smart Card 0)
-|    C003,0000 - C003,000F        I2C0
-|    C004,0000 - C004,0009        SCC   (16550 UART)
-|    C005,0000 - C005,0124        GPT   (Timers)
-|    C006,0000 - C006,0058        GPIO0
-|    C007,0000 - C007,001b        SC1   (Smart Card 1)
-|    C008,0000 - C008,FFFF        Unused
-|    C009,0000 - C009,FFFF        Unused
-|    C00A,0000 - C00A,FFFF        Unused
-|    C00B,0000 - C00B,000F        I2C1
-|    C00C,0000 - C00C,0006        SCP
-|    C00D,0000 - C00D,0010        SSP
-|    A000,0000 - A0FF,FFFF        SDRAM1  (16M)
-|    0000,0000 - 00FF,FFFF        SDRAM0  (16M)
-+----------------------------------------------------------------------------*/
-#define STB_FLASH_BASE_ADDRESS  0xFFE00000
-#define STB_FPGA_BASE_ADDRESS   0xF2000000
-#define STB_SICC_BASE_ADDRESS   0xC0000000
-#define STB_PPU_BASE_ADDR       0xC0010000
-#define STB_SC0_BASE_ADDRESS    0xC0020000
-#define STB_I2C1_BASE_ADDRESS   0xC0030000
-#define STB_SCC_BASE_ADDRESS    0xC0040000
-#define STB_TIMERS_BASE_ADDRESS 0xC0050000
-#define STB_GPIO0_BASE_ADDRESS  0xC0060000
-#define STB_SC1_BASE_ADDRESS    0xC0070000
-#define STB_I2C2_BASE_ADDRESS   0xC00B0000
-#define STB_SCP_BASE_ADDRESS    0xC00C0000
-#define STB_SSP_BASE_ADDRESS    0xC00D0000
-/*----------------------------------------------------------------------------+
-|The following are used by the IBM RTOS SW.
-|15-May-00 Changed these values to reflect movement of base addresses in
-|order to support 32MB of contiguous SDRAM space.
-|Points to the cacheable region since these values are used in IBM RTOS
-|to establish the vector address.
-+----------------------------------------------------------------------------*/
-#define STB_SDRAM1_BASE_ADDRESS 0x20000000
-#define STB_SDRAM1_SIZE         0x01000000
-#define STB_SDRAM0_BASE_ADDRESS 0x1F000000
-#define STB_SDRAM0_SIZE         0x01000000
-
-#else
-/*----------------------------------------------------------------------------+
-| ElPaso Overall Address Map (all addresses are double mapped, bit 0 of the
-| address is not decoded.  Numbers below are dependent on board configuration.
-| FLASH, SDRAM, DRAM numbers can be affected by actual board setup.  OPB
-| devices are inside the ElPaso chip.
-|    FFE0,0000 - FFFF,FFFF        FLASH
-|    F144,0000 - F104,FFFF        FPGA logic
-|    F140,0000 - F100,0000        ethernet (through FPGA logic)
-|    C000,0000 - C7FF,FFFF        OBP
-|    C000,0000 - C000,0014        SICC (16550+ infra red)
-|    C001,0000 - C001,0016        PPU (parallel port)
-|    C002,0000 - C002,001B        SC (smart card)
-|    C003,0000 - C003,000F        I2C 1
-|    C004,0000 - C004,0009        SCC (16550 UART)
-|    C005,0000 - C005,0124        Timers
-|    C006,0000 - C006,0058        GPIO0
-|    C007,0000 - C007,0058        GPIO1
-|    C008,0000 - C008,0058        GPIO2
-|    C009,0000 - C009,0058        GPIO3
-|    C00A,0000 - C00A,0058        GPIO4
-|    C00B,0000 - C00B,000F        I2C 2
-|    C00C,0000 - C00C,0006        SCP
-|    C00D,0000 - C00D,0006        SSP
-|    A000,0000 - A0FF,FFFF        SDRAM 16M
-|    0000,0000 - 00FF,FFFF        DRAM 16M
-+----------------------------------------------------------------------------*/
-#define STB_FLASH_BASE_ADDRESS  0xFFE00000
-#define STB_FPGA_BASE_ADDRESS   0xF1440000
-#define STB_ENET_BASE_ADDRESS   0xF1400000
-#define STB_SICC_BASE_ADDRESS   0xC0000000
-#define STB_PPU_BASE_ADDR       0xC0010000
-#define STB_SC_BASE_ADDRESS     0xC0020000
-#define STB_I2C1_BASE_ADDRESS   0xC0030000
-#define STB_SCC_BASE_ADDRESS    0xC0040000
-#define STB_TIMERS_BASE_ADDRESS 0xC0050000
-#define STB_GPIO0_BASE_ADDRESS  0xC0060000
-#define STB_GPIO1_BASE_ADDRESS  0xC0070000
-#define STB_GPIO2_BASE_ADDRESS  0xC0080000
-#define STB_GPIO3_BASE_ADDRESS  0xC0090000
-#define STB_GPIO4_BASE_ADDRESS  0xC00A0000
-#define STB_I2C2_BASE_ADDRESS   0xC00B0000
-#define STB_SCP_BASE_ADDRESS    0xC00C0000
-#define STB_SSP_BASE_ADDRESS    0xC00D0000
-#define STB_SDRAM_BASE_ADDRESS  0xA0000000
-#endif
-
-/*----------------------------------------------------------------------------+
-| Other common defines.
-+----------------------------------------------------------------------------*/
-#ifndef TRUE
-#define TRUE    1
-#endif
-
-#ifndef FALSE
-#define FALSE   0
-#endif
-
-#endif /* _stb_h_ */
diff --git a/arch/ppc/boot/simple/uartlite_tty.c b/arch/ppc/boot/simple/uartlite_tty.c
deleted file mode 100644
index ca1743e3e912..000000000000
--- a/arch/ppc/boot/simple/uartlite_tty.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * Xilinx UARTLITE bootloader driver
- *
- * Copyright (c) 2007 Secret Lab Technologies Ltd.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/types.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-
-#define UARTLITE_BASEADDR ((void*)(XPAR_UARTLITE_0_BASEADDR))
-
-unsigned long
-serial_init(int chan, void *ignored)
-{
-	/* Clear the RX FIFO */
-	out_be32(UARTLITE_BASEADDR + 0x0C, 0x2);
-	return 0;
-}
-
-void
-serial_putc(unsigned long com_port, unsigned char c)
-{
-	while ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x08) != 0); /* spin */
-	out_be32(UARTLITE_BASEADDR + 0x4, c);
-}
-
-unsigned char
-serial_getc(unsigned long com_port)
-{
-	while ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x01) == 0); /* spin */
-	return in_be32(UARTLITE_BASEADDR);
-}
-
-int
-serial_tstc(unsigned long com_port)
-{
-	return ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x01) != 0);
-}
diff --git a/arch/ppc/boot/utils/.gitignore b/arch/ppc/boot/utils/.gitignore
deleted file mode 100644
index bbdfb3b9c532..000000000000
--- a/arch/ppc/boot/utils/.gitignore
+++ /dev/null
@@ -1,3 +0,0 @@
-mkprep
-mkbugboot
-mktree
diff --git a/arch/ppc/boot/utils/elf.pl b/arch/ppc/boot/utils/elf.pl
deleted file mode 100644
index d3e9d9d5b84e..000000000000
--- a/arch/ppc/boot/utils/elf.pl
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# ELF header field numbers
-#
-
-$e_ident	=  0;	# Identification bytes / magic number
-$e_type		=  1;	# ELF file type
-$e_machine	=  2;	# Target machine type
-$e_version	=  3;	# File version
-$e_entry	=  4;	# Start address
-$e_phoff	=  5;	# Program header file offset
-$e_shoff	=  6;	# Section header file offset
-$e_flags	=  7;	# File flags
-$e_ehsize	=  8;	# Size of ELF header
-$e_phentsize	=  9;	# Size of program header
-$e_phnum	= 10;	# Number of program header entries
-$e_shentsize	= 11;	# Size of section header
-$e_shnum	= 12;	# Number of section header entries
-$e_shstrndx	= 13;	# Section header table string index
-
-#
-# Section header field numbers
-#
-
-$sh_name	=  0;	# Section name
-$sh_type	=  1;	# Section header type
-$sh_flags	=  2;	# Section header flags
-$sh_addr	=  3;	# Virtual address
-$sh_offset	=  4;	# File offset
-$sh_size	=  5;	# Section size
-$sh_link	=  6;	# Miscellaneous info
-$sh_info	=  7;	# More miscellaneous info
-$sh_addralign	=  8;	# Memory alignment
-$sh_entsize	=  9;	# Entry size if this is a table
diff --git a/arch/ppc/boot/utils/mkbugboot.c b/arch/ppc/boot/utils/mkbugboot.c
deleted file mode 100644
index 1640c4199ca6..000000000000
--- a/arch/ppc/boot/utils/mkbugboot.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Makes a Motorola PPCBUG ROM bootable image which can be flashed
- * into one of the FLASH banks on a Motorola PowerPlus board.
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#define ELF_HEADER_SIZE	65536
-
-#include <unistd.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <fcntl.h>
-#include <netinet/in.h>
-#ifdef __sun__
-#include <inttypes.h>
-#else
-#include <stdint.h>
-#endif
-
-/* size of read buffer */
-#define SIZE 0x1000
-
-/* PPCBUG ROM boot header */
-typedef struct bug_boot_header {
-  uint8_t	magic_word[4];		/* "BOOT" */
-  uint32_t	entry_offset;		/* Offset from top of header to code */
-  uint32_t	routine_length;		/* Length of code */
-  uint8_t	routine_name[8];	/* Name of the boot code */
-} bug_boot_header_t;
-
-#define HEADER_SIZE	sizeof(bug_boot_header_t)
-
-void update_checksum(void *buf, size_t size, uint16_t *sum)
-{
-	uint32_t csum = *sum;
-
-	while (size) {
-		csum += *(uint16_t *)buf;
-		if (csum > 0xffff)
-			csum -= 0xffff;
-		buf = (uint16_t *)buf + 1;
-		size -= 2;
-	}
-	*sum = csum;
-}
-
-uint32_t copy_image(int in_fd, int out_fd, uint16_t *sum)
-{
-	uint8_t buf[SIZE];
-	int offset = 0;
-	int n;
-	uint32_t image_size = 0;
-
-	lseek(in_fd, ELF_HEADER_SIZE, SEEK_SET);
-
-	/* Copy an image while recording its size */
-	while ( (n = read(in_fd, buf + offset, SIZE - offset)) > 0 ) {
-		n += offset;
-		offset = n & 1;
-		n -= offset;
-		image_size = image_size + n;
-		/* who's going to deal with short writes? */
-		write(out_fd, buf, n);
-		update_checksum(buf, n, sum);
-		if (offset)
-			buf[0] = buf[n];
-	}
-
-	/* BUG romboot requires that our size is divisible by 2 */
-	/* align image to 2 byte boundary */
-	if (offset) {
-		image_size += 2;
-		buf[1] = '\0';
-		write(out_fd, buf, 2);
-		update_checksum(buf, 2, sum);
-	}
-	return image_size;
-}
-
-void write_bugboot_header(int out_fd, uint32_t boot_size, uint16_t *sum)
-{
-	static bug_boot_header_t bbh = {
-		.magic_word = "BOOT",
-		.routine_name = "LINUXROM"
-	};
-
-	/* Fill in the PPCBUG ROM boot header */
-	bbh.entry_offset = htonl(HEADER_SIZE);	/* Entry address */
-	bbh.routine_length= htonl(HEADER_SIZE+boot_size+2);	/* Routine length */
-
-	/* Output the header and bootloader to the file */
-	write(out_fd, &bbh, sizeof(bug_boot_header_t));
-	update_checksum(&bbh, sizeof(bug_boot_header_t), sum);
-}
-
-int main(int argc, char *argv[])
-{
-	int image_fd, bugboot_fd;
-	uint32_t kernel_size = 0;
-	uint16_t checksum = 0;
-
-	if (argc != 3) {
-		fprintf(stderr, "usage: %s <kernel_image> <bugboot>\n",argv[0]);
-		exit(-1);
-	}
-
-	/* Get file args */
-
-	/* kernel image file */
-	if ((image_fd = open(argv[1] , 0)) < 0)
-		exit(-1);
-
-	/* bugboot file */
-	if (!strcmp(argv[2], "-"))
-		bugboot_fd = 1;			/* stdout */
-	else if ((bugboot_fd = creat(argv[2] , 0755)) < 0)
-		exit(-1);
-
-	/* Set file position after ROM header block where zImage will be written */
-	lseek(bugboot_fd, HEADER_SIZE, SEEK_SET);
-
-	/* Copy kernel image into bugboot image */
-	kernel_size = copy_image(image_fd, bugboot_fd, &checksum);
-
-	/* Set file position to beginning where header/romboot will be written */
-	lseek(bugboot_fd, 0, SEEK_SET);
-
-	/* Write out BUG header/romboot */
-	write_bugboot_header(bugboot_fd, kernel_size, &checksum);
-
-	/* Write out the calculated checksum */
-	lseek(bugboot_fd, 0, SEEK_END);
-	write(bugboot_fd, &checksum, 2);
-
-	/* Close bugboot file */
-	close(bugboot_fd);
-	return 0;
-}
diff --git a/arch/ppc/boot/utils/mkprep.c b/arch/ppc/boot/utils/mkprep.c
deleted file mode 100644
index 192bb397126f..000000000000
--- a/arch/ppc/boot/utils/mkprep.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * Makes a prep bootable image which can be dd'd onto
- * a disk device to make a bootdisk.  Will take
- * as input a elf executable, strip off the header
- * and write out a boot image as:
- * 1) default - strips elf header
- *      suitable as a network boot image
- * 2) -pbp - strips elf header and writes out prep boot partition image
- *      cat or dd onto disk for booting
- * 3) -asm - strips elf header and writes out as asm data
- *      useful for generating data for a compressed image
- *                  -- Cort
- *
- * Modified for x86 hosted builds by Matt Porter <porter@neta.com>
- * Modified for Sparc hosted builds by Peter Wahl <PeterWahl@web.de>
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-/* size of read buffer */
-#define SIZE 0x1000
-
-/*
- * Partition table entry
- *  - from the PReP spec
- */
-typedef struct partition_entry {
-	unsigned char boot_indicator;
-	unsigned char starting_head;
-	unsigned char starting_sector;
-	unsigned char starting_cylinder;
-
-	unsigned char system_indicator;
-	unsigned char ending_head;
-	unsigned char ending_sector;
-	unsigned char ending_cylinder;
-
-	unsigned char beginning_sector[4];
-	unsigned char number_of_sectors[4];
-} partition_entry_t;
-
-#define BootActive	0x80
-#define SystemPrep	0x41
-
-void copy_image(FILE *, FILE *);
-void write_prep_partition(FILE *, FILE *);
-void write_asm_data(FILE *, FILE *);
-
-unsigned int elfhdr_size = 65536;
-
-int main(int argc, char *argv[])
-{
-	FILE *in, *out;
-	int argptr = 1;
-	int prep = 0;
-	int asmoutput = 0;
-
-	if (argc < 3 || argc > 4) {
-		fprintf(stderr, "usage: %s [-pbp] [-asm] <boot-file> <image>\n",
-			argv[0]);
-		exit(-1);
-	}
-
-/* needs to handle args more elegantly -- but this is a small/simple program */
-
-	/* check for -pbp */
-	if (!strcmp(argv[argptr], "-pbp")) {
-		prep = 1;
-		argptr++;
-	}
-
-	/* check for -asm */
-	if (!strcmp(argv[argptr], "-asm")) {
-		asmoutput = 1;
-		argptr++;
-	}
-
-	/* input file */
-	if (!strcmp(argv[argptr], "-"))
-		in = stdin;
-	else if (!(in = fopen(argv[argptr], "r")))
-		exit(-1);
-	argptr++;
-
-	/* output file */
-	if (!strcmp(argv[argptr], "-"))
-		out = stdout;
-	else if (!(out = fopen(argv[argptr], "w")))
-		exit(-1);
-	argptr++;
-
-	/* skip elf header in input file */
-	/*if ( !prep )*/
-	fseek(in, elfhdr_size, SEEK_SET);
-
-	/* write prep partition if necessary */
-	if (prep)
-		write_prep_partition(in, out);
-
-	/* write input image to bootimage */
-	if (asmoutput)
-		write_asm_data(in, out);
-	else
-		copy_image(in, out);
-
-	return 0;
-}
-
-void store_le32(unsigned int v, unsigned char *p)
-{
-	p[0] = v;
-	p[1] = v >>= 8;
-	p[2] = v >>= 8;
-	p[3] = v >> 8;
-}
-
-void write_prep_partition(FILE *in, FILE *out)
-{
-	unsigned char block[512];
-	partition_entry_t pe;
-	unsigned char *entry  = block;
-	unsigned char *length = block + 4;
-	long pos = ftell(in), size;
-
-	if (fseek(in, 0, SEEK_END) < 0) {
-		fprintf(stderr,"info failed\n");
-		exit(-1);
-	}
-	size = ftell(in);
-	if (fseek(in, pos, SEEK_SET) < 0) {
-		fprintf(stderr,"info failed\n");
-		exit(-1);
-	}
-
-	memset(block, '\0', sizeof(block));
-
-	/* set entry point and boot image size skipping over elf header */
-	store_le32(0x400/*+65536*/, entry);
-	store_le32(size-elfhdr_size+0x400, length);
-
-	/* sets magic number for msdos partition (used by linux) */
-	block[510] = 0x55;
-	block[511] = 0xAA;
-
-	/*
-	* Build a "PReP" partition table entry in the boot record
-	*  - "PReP" may only look at the system_indicator
-	*/
-	pe.boot_indicator   = BootActive;
-	pe.system_indicator = SystemPrep;
-	/*
-	* The first block of the diskette is used by this "boot record" which
-	* actually contains the partition table. (The first block of the
-	* partition contains the boot image, but I digress...)  We'll set up
-	* one partition on the diskette and it shall contain the rest of the
-	* diskette.
-	*/
-	pe.starting_head     = 0;	/* zero-based			     */
-	pe.starting_sector   = 2;	/* one-based			     */
-	pe.starting_cylinder = 0;	/* zero-based			     */
-	pe.ending_head       = 1;	/* assumes two heads		     */
-	pe.ending_sector     = 18;	/* assumes 18 sectors/track	     */
-	pe.ending_cylinder   = 79;	/* assumes 80 cylinders/diskette     */
-
-	/*
-	* The "PReP" software ignores the above fields and just looks at
-	* the next two.
-	*   - size of the diskette is (assumed to be)
-	*     (2 tracks/cylinder)(18 sectors/tracks)(80 cylinders/diskette)
-	*   - unlike the above sector numbers, the beginning sector is zero-based!
-	*/
-#if 0
-	store_le32(1, pe.beginning_sector);
-#else
-	/* This has to be 0 on the PowerStack? */
-	store_le32(0, pe.beginning_sector);
-#endif
-
-	store_le32(2*18*80-1, pe.number_of_sectors);
-
-	memcpy(&block[0x1BE], &pe, sizeof(pe));
-
-	fwrite(block, sizeof(block), 1, out);
-	fwrite(entry, 4, 1, out);
-	fwrite(length, 4, 1, out);
-	/* set file position to 2nd sector where image will be written */
-	fseek( out, 0x400, SEEK_SET );
-}
-
-
-
-void copy_image(FILE *in, FILE *out)
-{
-	char buf[SIZE];
-	int n;
-
-	while ( (n = fread(buf, 1, SIZE, in)) > 0 )
-		fwrite(buf, 1, n, out);
-}
-
-
-void
-write_asm_data(FILE *in, FILE *out)
-{
-	int i, cnt, pos = 0;
-	unsigned int cksum = 0, val;
-	unsigned char *lp;
-	unsigned char buf[SIZE];
-	size_t len;
-
-	fputs("\t.data\n\t.globl input_data\ninput_data:\n", out);
-	while ((len = fread(buf, 1, sizeof(buf), in)) > 0) {
-		cnt = 0;
-		lp = buf;
-		/* Round up to longwords */
-		while (len & 3)
-			buf[len++] = '\0';
-		for (i = 0;  i < len;  i += 4) {
-			if (cnt == 0)
-				fputs("\t.long\t", out);
-			fprintf(out, "0x%02X%02X%02X%02X",
-				lp[0], lp[1], lp[2], lp[3]);
-			val = *(unsigned long *)lp;
-			cksum ^= val;
-			lp += 4;
-			if (++cnt == 4) {
-				cnt = 0;
-				fprintf(out, " # %x \n", pos+i-12);
-			} else {
-				fputs(",", out);
-			}
-		}
-		if (cnt)
-			fputs("0\n", out);
-		pos += len;
-	}
-	fprintf(out, "\t.globl input_len\ninput_len:\t.long\t0x%x\n", pos);
-	fprintf(stderr, "cksum = %x\n", cksum);
-}
diff --git a/arch/ppc/boot/utils/mktree.c b/arch/ppc/boot/utils/mktree.c
deleted file mode 100644
index 2be22e28f2b3..000000000000
--- a/arch/ppc/boot/utils/mktree.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * Makes a tree bootable image for IBM Evaluation boards.
- * Basically, just take a zImage, skip the ELF header, and stuff
- * a 32 byte header on the front.
- *
- * We use htonl, which is a network macro, to make sure we're doing
- * The Right Thing on an LE machine.  It's non-obvious, but it should
- * work on anything BSD'ish.
- */
-
-#include <fcntl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/stat.h>
-#include <unistd.h>
-#include <netinet/in.h>
-#ifdef __sun__
-#include <inttypes.h>
-#else
-#include <stdint.h>
-#endif
-
-/* This gets tacked on the front of the image.  There are also a few
- * bytes allocated after the _start label used by the boot rom (see
- * head.S for details).
- */
-typedef struct boot_block {
-	uint32_t bb_magic;		/* 0x0052504F */
-	uint32_t bb_dest;		/* Target address of the image */
-	uint32_t bb_num_512blocks;	/* Size, rounded-up, in 512 byte blks */
-	uint32_t bb_debug_flag;	/* Run debugger or image after load */
-	uint32_t bb_entry_point;	/* The image address to start */
-	uint32_t bb_checksum;	/* 32 bit checksum including header */
-	uint32_t reserved[2];
-} boot_block_t;
-
-#define IMGBLK	512
-char	tmpbuf[IMGBLK];
-
-int main(int argc, char *argv[])
-{
-	int	in_fd, out_fd;
-	int	nblks, i;
-	uint	cksum, *cp;
-	struct	stat	st;
-	boot_block_t	bt;
-
-	if (argc < 3) {
-		fprintf(stderr, "usage: %s <zImage-file> <boot-image> [entry-point]\n",argv[0]);
-		exit(1);
-	}
-
-	if (stat(argv[1], &st) < 0) {
-		perror("stat");
-		exit(2);
-	}
-
-	nblks = (st.st_size + IMGBLK) / IMGBLK;
-
-	bt.bb_magic = htonl(0x0052504F);
-
-	/* If we have the optional entry point parameter, use it */
-	if (argc == 4)
-		bt.bb_dest = bt.bb_entry_point = htonl(strtoul(argv[3], NULL, 0));
-	else
-		bt.bb_dest = bt.bb_entry_point = htonl(0x500000);
-
-	/* We know these from the linker command.
-	 * ...and then move it up into memory a little more so the
-	 * relocation can happen.
-	 */
-	bt.bb_num_512blocks = htonl(nblks);
-	bt.bb_debug_flag = 0;
-
-	bt.bb_checksum = 0;
-
-	/* To be neat and tidy :-).
-	*/
-	bt.reserved[0] = 0;
-	bt.reserved[1] = 0;
-
-	if ((in_fd = open(argv[1], O_RDONLY)) < 0) {
-		perror("zImage open");
-		exit(3);
-	}
-
-	if ((out_fd = open(argv[2], (O_RDWR | O_CREAT | O_TRUNC), 0666)) < 0) {
-		perror("bootfile open");
-		exit(3);
-	}
-
-	cksum = 0;
-	cp = (void *)&bt;
-	for (i=0; i<sizeof(bt)/sizeof(uint); i++)
-		cksum += *cp++;
-	
-	/* Assume zImage is an ELF file, and skip the 64K header.
-	*/
-	if (read(in_fd, tmpbuf, IMGBLK) != IMGBLK) {
-		fprintf(stderr, "%s is too small to be an ELF image\n",
-				argv[1]);
-		exit(4);
-	}
-
-	if ((*(uint *)tmpbuf) != htonl(0x7f454c46)) {
-		fprintf(stderr, "%s is not an ELF image\n", argv[1]);
-		exit(4);
-	}
-
-	if (lseek(in_fd, (64 * 1024), SEEK_SET) < 0) {
-		fprintf(stderr, "%s failed to seek in ELF image\n", argv[1]);
-		exit(4);
-	}
-
-	nblks -= (64 * 1024) / IMGBLK;
-
-	/* And away we go......
-	*/
-	if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
-		perror("boot-image write");
-		exit(5);
-	}
-
-	while (nblks-- > 0) {
-		if (read(in_fd, tmpbuf, IMGBLK) < 0) {
-			perror("zImage read");
-			exit(5);
-		}
-		cp = (uint *)tmpbuf;
-		for (i=0; i<sizeof(tmpbuf)/sizeof(uint); i++)
-			cksum += *cp++;
-		if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
-			perror("boot-image write");
-			exit(5);
-		}
-	}
-
-	/* rewrite the header with the computed checksum.
-	*/
-	bt.bb_checksum = htonl(cksum);
-	if (lseek(out_fd, 0, SEEK_SET) < 0) {
-		perror("rewrite seek");
-		exit(1);
-	}
-	if (write(out_fd, &bt, sizeof(bt)) != sizeof(bt)) {
-		perror("boot-image rewrite");
-		exit(1);
-	}
-
-	exit(0);
-}
diff --git a/arch/ppc/configs/FADS_defconfig b/arch/ppc/configs/FADS_defconfig
deleted file mode 100644
index c1934f828a4b..000000000000
--- a/arch/ppc/configs/FADS_defconfig
+++ /dev/null
@@ -1,520 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-CONFIG_FADS=y
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-# CONFIG_SERIAL_CPM_ALT_SMC2 is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-CONFIG_SCC1_ENET=y
-# CONFIG_SCC2_ENET is not set
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/IVMS8_defconfig b/arch/ppc/configs/IVMS8_defconfig
deleted file mode 100644
index 66bbefe8e9b3..000000000000
--- a/arch/ppc/configs/IVMS8_defconfig
+++ /dev/null
@@ -1,548 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-CONFIG_IVMS8=y
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_IDEDISK_STROKE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_BLK_DEV_MPC8xx_IDE=y
-CONFIG_IDE_8xx_PCCARD=y
-# CONFIG_IDE_8xx_DIRECT is not set
-# CONFIG_IDE_EXT_DIRECT is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-# CONFIG_SERIAL_CPM_SMC2 is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-# CONFIG_SCC_ENET is not set
-CONFIG_FEC_ENET=y
-CONFIG_USE_MDIO=y
-CONFIG_FEC_AM79C874=y
-CONFIG_FEC_LXT970=y
-CONFIG_FEC_LXT971=y
-CONFIG_FEC_QS6612=y
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/TQM823L_defconfig b/arch/ppc/configs/TQM823L_defconfig
deleted file mode 100644
index 3b44f3d79bf6..000000000000
--- a/arch/ppc/configs/TQM823L_defconfig
+++ /dev/null
@@ -1,521 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-CONFIG_TQM823L=y
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-CONFIG_TQM8xxL=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_SERIAL_CPM_ALT_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-# CONFIG_SCC1_ENET is not set
-CONFIG_SCC2_ENET=y
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/TQM8260_defconfig b/arch/ppc/configs/TQM8260_defconfig
deleted file mode 100644
index 57cfa83d12d9..000000000000
--- a/arch/ppc/configs/TQM8260_defconfig
+++ /dev/null
@@ -1,499 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_8xx is not set
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_8260=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_SERIAL_CONSOLE=y
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-CONFIG_TQM8260=y
-# CONFIG_WILLOW_1 is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PC_KEYBOARD is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=32
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_SCC_ENET is not set
-CONFIG_FEC_ENET=y
-# CONFIG_USE_MDIO is not set
-
-#
-# MPC8260 CPM Options
-#
-CONFIG_SCC_CONSOLE=y
-# CONFIG_FCC1_ENET is not set
-CONFIG_FCC2_ENET=y
-# CONFIG_FCC3_ENET is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/TQM850L_defconfig b/arch/ppc/configs/TQM850L_defconfig
deleted file mode 100644
index b02d19630e31..000000000000
--- a/arch/ppc/configs/TQM850L_defconfig
+++ /dev/null
@@ -1,521 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-CONFIG_TQM850L=y
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-CONFIG_TQM8xxL=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_SERIAL_CPM_ALT_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-# CONFIG_SCC1_ENET is not set
-CONFIG_SCC2_ENET=y
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-CONFIG_8xx_CPU6=y
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/TQM860L_defconfig b/arch/ppc/configs/TQM860L_defconfig
deleted file mode 100644
index 857e4ab28011..000000000000
--- a/arch/ppc/configs/TQM860L_defconfig
+++ /dev/null
@@ -1,549 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-CONFIG_TQM860L=y
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-CONFIG_TQM8xxL=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-CONFIG_IDE=y
-
-#
-# IDE, ATA and ATAPI Block devices
-#
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_BLK_DEV_MPC8xx_IDE=y
-CONFIG_IDE_8xx_PCCARD=y
-# CONFIG_IDE_8xx_DIRECT is not set
-# CONFIG_IDE_EXT_DIRECT is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-CONFIG_SCC1_ENET=y
-# CONFIG_SCC2_ENET is not set
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/bamboo_defconfig b/arch/ppc/configs/bamboo_defconfig
deleted file mode 100644
index 41fd3938fa5c..000000000000
--- a/arch/ppc/configs/bamboo_defconfig
+++ /dev/null
@@ -1,944 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12
-# Tue Jun 28 15:24:25 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-CONFIG_44x=y
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_BAMBOO=y
-# CONFIG_EBONY is not set
-# CONFIG_LUAN is not set
-# CONFIG_OCOTEA is not set
-CONFIG_440EP=y
-CONFIG_440=y
-CONFIG_IBM440EP_ERR42=y
-CONFIG_IBM_OCP=y
-# CONFIG_PPC4xx_DMA is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_PM is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_IDEDMA_PCI_AUTO is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-CONFIG_BLK_DEV_CMD64X=y
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=64
-CONFIG_IBM_EMAC_TXB=8
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=y
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-
-#
-# Miscellaneous USB options
-#
-# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Input Devices
-#
-# CONFIG_USB_HID is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=y
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-CONFIG_BDI_SWITCH=y
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/bseip_defconfig b/arch/ppc/configs/bseip_defconfig
deleted file mode 100644
index ce9f9f77f2ee..000000000000
--- a/arch/ppc/configs/bseip_defconfig
+++ /dev/null
@@ -1,517 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-CONFIG_BSEIP=y
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-# CONFIG_SCC1_ENET is not set
-CONFIG_SCC2_ENET=y
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-# CONFIG_ENET_BIG_BUFFERS is not set
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/bubinga_defconfig b/arch/ppc/configs/bubinga_defconfig
deleted file mode 100644
index ebec8013102c..000000000000
--- a/arch/ppc/configs/bubinga_defconfig
+++ /dev/null
@@ -1,592 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-CONFIG_BUBINGA=y
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_BIOS_FIXUP=y
-CONFIG_405EP=y
-CONFIG_IBM_OPENBIOS=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=64
-CONFIG_IBM_EMAC_TXB=8
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/chestnut_defconfig b/arch/ppc/configs/chestnut_defconfig
deleted file mode 100644
index e219aad4d0e3..000000000000
--- a/arch/ppc/configs/chestnut_defconfig
+++ /dev/null
@@ -1,794 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Fri Mar 11 14:32:49 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_GEN550=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-CONFIG_CHESTNUT=y
-# CONFIG_SPRUCE is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-CONFIG_MV64360=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf1000000
-CONFIG_MV64X60_NEW_BASE=0xf1000000
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,115200 ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-# CONFIG_CONSISTENT_START_BOOL is not set
-CONFIG_CONSISTENT_START=0xff100000
-# CONFIG_CONSISTENT_SIZE_BOOL is not set
-CONFIG_CONSISTENT_SIZE=0x00200000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfc000000
-CONFIG_MTD_PHYSMAP_LEN=0x02000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_MV643XX_ETH_0=y
-CONFIG_MV643XX_ETH_1=y
-# CONFIG_MV643XX_ETH_2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_MPSC is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-CONFIG_DEVFS_MOUNT=y
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/cpci405_defconfig b/arch/ppc/configs/cpci405_defconfig
deleted file mode 100644
index a336ffa8ff41..000000000000
--- a/arch/ppc/configs/cpci405_defconfig
+++ /dev/null
@@ -1,631 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-CONFIG_CPCI405=y
-# CONFIG_EP405 is not set
-# CONFIG_EVB405EP is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_PPC_OCP=y
-CONFIG_405GP=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=64
-CONFIG_IBM_EMAC_TXB=8
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/cpci690_defconfig b/arch/ppc/configs/cpci690_defconfig
deleted file mode 100644
index ff3f7e02ab0f..000000000000
--- a/arch/ppc/configs/cpci690_defconfig
+++ /dev/null
@@ -1,798 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-mm1
-# Thu Sep  1 17:10:37 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_STD_MMU=y
-# CONFIG_NOT_COHERENT_CACHE is not set
-
-#
-# Performance-monitoring counters support
-#
-# CONFIG_PERFCTR is not set
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-CONFIG_CPCI690=y
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-# CONFIG_EV64360 is not set
-CONFIG_GT64260=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf1000000
-CONFIG_MV64X60_NEW_BASE=0xf1000000
-# CONFIG_SMP is not set
-CONFIG_HIGHMEM=y
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyMM0 ip=on"
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_KGDBOE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MPSC=y
-CONFIG_SERIAL_MPSC_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Speakup console speech
-#
-# CONFIG_SPEAKUP is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISER4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ASFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/ebony_defconfig b/arch/ppc/configs/ebony_defconfig
deleted file mode 100644
index c8deca3b4545..000000000000
--- a/arch/ppc/configs/ebony_defconfig
+++ /dev/null
@@ -1,585 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-CONFIG_44x=y
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EBONY=y
-# CONFIG_OCOTEA is not set
-CONFIG_440GP=y
-CONFIG_440=y
-CONFIG_IBM_OCP=y
-# CONFIG_PM is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_LBD=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=64
-CONFIG_IBM_EMAC_TXB=8
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-CONFIG_BDI_SWITCH=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/ep405_defconfig b/arch/ppc/configs/ep405_defconfig
deleted file mode 100644
index 880b5f8d30c3..000000000000
--- a/arch/ppc/configs/ep405_defconfig
+++ /dev/null
@@ -1,572 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_BUBINGA is not set
-# CONFIG_CPCI405 is not set
-CONFIG_EP405=y
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-# CONFIG_EP405PC is not set
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_BIOS_FIXUP=y
-CONFIG_405GP=y
-CONFIG_EMBEDDEDBOOT=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/est8260_defconfig b/arch/ppc/configs/est8260_defconfig
deleted file mode 100644
index b3f6446bb083..000000000000
--- a/arch/ppc/configs/est8260_defconfig
+++ /dev/null
@@ -1,491 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_8xx is not set
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_8260=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_EST8260=y
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_WILLOW_1 is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PC_KEYBOARD is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_PPC601_SYNC_FIX is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-CONFIG_SCC_ENET=y
-# CONFIG_FEC_ENET is not set
-
-#
-# MPC8260 CPM Options
-#
-CONFIG_SCC_CONSOLE=y
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/ev64260_defconfig b/arch/ppc/configs/ev64260_defconfig
deleted file mode 100644
index 587e9a3b9491..000000000000
--- a/arch/ppc/configs/ev64260_defconfig
+++ /dev/null
@@ -1,758 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc2
-# Fri Nov 19 11:17:02 2004
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_ALTIVEC=y
-CONFIG_TAU=y
-# CONFIG_TAU_INT is not set
-# CONFIG_TAU_AVERAGE is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_GEN550=y
-CONFIG_PPC_STD_MMU=y
-# CONFIG_NOT_COHERENT_CACHE is not set
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_SPRUCE is not set
-CONFIG_EV64260=y
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_LITE5200 is not set
-CONFIG_GT64260=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf1000000
-CONFIG_MV64X60_NEW_BASE=0xfbe00000
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,115200 ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-CONFIG_SYSFS=y
-CONFIG_DEVFS_FS=y
-# CONFIG_DEVFS_MOUNT is not set
-# CONFIG_DEVFS_DEBUG is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/ev64360_defconfig b/arch/ppc/configs/ev64360_defconfig
deleted file mode 100644
index f297c4bb632b..000000000000
--- a/arch/ppc/configs/ev64360_defconfig
+++ /dev/null
@@ -1,817 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.14
-# Fri Oct 28 19:15:34 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-CONFIG_TAU=y
-# CONFIG_TAU_INT is not set
-# CONFIG_TAU_AVERAGE is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-CONFIG_EV64360=y
-CONFIG_MV64360=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf1000000
-CONFIG_MV64X60_NEW_BASE=0xf1000000
-# CONFIG_SMP is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyMM0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2"
-# CONFIG_PM is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-# CONFIG_CONSISTENT_START_BOOL is not set
-CONFIG_CONSISTENT_START=0xff100000
-# CONFIG_CONSISTENT_SIZE_BOOL is not set
-CONFIG_CONSISTENT_SIZE=0x00200000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xff000000
-CONFIG_MTD_PHYSMAP_LEN=0x01000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-CONFIG_MTD_PHRAM=y
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_MV643XX_ETH_0=y
-# CONFIG_MV643XX_ETH_1 is not set
-# CONFIG_MV643XX_ETH_2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MPSC=y
-CONFIG_SERIAL_MPSC_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_MV64X60_WDT=y
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/hdpu_defconfig b/arch/ppc/configs/hdpu_defconfig
deleted file mode 100644
index 956a17897e33..000000000000
--- a/arch/ppc/configs/hdpu_defconfig
+++ /dev/null
@@ -1,890 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11
-# Wed Mar 16 12:43:19 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_LOCK_KERNEL=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-# CONFIG_CPUSETS is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_STOP_MACHINE=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_PM is not set
-CONFIG_PPC_STD_MMU=y
-# CONFIG_NOT_COHERENT_CACHE is not set
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-CONFIG_HDPU=y
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-CONFIG_MV64360=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf1000000
-CONFIG_MV64X60_NEW_BASE=0xf1000000
-# CONFIG_SMP is not set
-# CONFIG_IRQ_ALL_CPUS is not set
-# CONFIG_NR_CPUS is not set
-CONFIG_PREEMPT=y
-CONFIG_HIGHMEM=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="root=/dev/nfs ip=auto"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-# CONFIG_HIGHMEM_START_BOOL is not set
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START_BOOL=y
-CONFIG_KERNEL_START=0x80000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xfc000000
-CONFIG_MTD_PHYSMAP_LEN=0x04000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-CONFIG_SCSI_AIC7XXX=y
-CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
-CONFIG_AIC7XXX_RESET_DELAY_MS=15000
-# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
-CONFIG_AIC7XXX_DEBUG_MASK=0
-# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_MV643XX_ETH_0=y
-# CONFIG_MV643XX_ETH_1 is not set
-# CONFIG_MV643XX_ETH_2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MPSC=y
-CONFIG_SERIAL_MPSC_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=y
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-CONFIG_NFSD=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=15
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/katana_defconfig b/arch/ppc/configs/katana_defconfig
deleted file mode 100644
index 7311fe6b42de..000000000000
--- a/arch/ppc/configs/katana_defconfig
+++ /dev/null
@@ -1,948 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-mm1
-# Thu Sep  1 17:16:03 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_STD_MMU=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Performance-monitoring counters support
-#
-# CONFIG_PERFCTR is not set
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-CONFIG_KATANA=y
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-# CONFIG_EV64360 is not set
-CONFIG_MV64360=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xf8100000
-CONFIG_MV64X60_NEW_BASE=0xf8100000
-# CONFIG_SMP is not set
-CONFIG_HIGHMEM=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyMM0 ip=on"
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-# CONFIG_HIGHMEM_START_BOOL is not set
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START_BOOL=y
-CONFIG_CONSISTENT_START=0xf0000000
-CONFIG_CONSISTENT_SIZE_BOOL=y
-CONFIG_CONSISTENT_SIZE=0x00400000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-# CONFIG_MTD_CFI_I1 is not set
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0xe0000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-CONFIG_MTD_PHRAM=y
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-CONFIG_E1000=y
-# CONFIG_E1000_NAPI is not set
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_MV643XX_ETH_0=y
-CONFIG_MV643XX_ETH_1=y
-CONFIG_MV643XX_ETH_2=y
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_KGDBOE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MPSC=y
-CONFIG_SERIAL_MPSC_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_MV64XXX=y
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-CONFIG_SENSORS_M41T00=y
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Speakup console speech
-#
-# CONFIG_SPEAKUP is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISER4_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_RELAYFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_ASFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/lite5200_defconfig b/arch/ppc/configs/lite5200_defconfig
deleted file mode 100644
index 7e7a943d8cfe..000000000000
--- a/arch/ppc/configs/lite5200_defconfig
+++ /dev/null
@@ -1,436 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_KMOD=y
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_FSL_OCP=y
-CONFIG_PPC_STD_MMU=y
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-CONFIG_LITE5200=y
-CONFIG_PPC_MPC52xx=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0 root=/dev/ram0 rw"
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-#
-# Device Drivers
-#
-#
-# Generic Driver Options
-#
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-#
-# Plug and Play support
-#
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-#
-# Fusion MPT device support
-#
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-#
-# Macintosh device drivers
-#
-#
-# Networking support
-#
-# CONFIG_NET is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-#
-# ISDN subsystem
-#
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-#
-# Input device support
-#
-CONFIG_INPUT=y
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_MPC52xx=y
-CONFIG_SERIAL_MPC52xx_CONSOLE=y
-CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-#
-# Misc devices
-#
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-#
-# Digital Video Broadcasting Devices
-#
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-#
-# USB support
-#
-# CONFIG_USB is not set
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-#
-# Library routines
-#
-# CONFIG_CRC16 is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_SPINLOCK_SLEEP=y
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-# CONFIG_BDI_SWITCH is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_SERIAL_TEXT_DEBUG=y
-CONFIG_PPC_OCP=y
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/lopec_defconfig b/arch/ppc/configs/lopec_defconfig
deleted file mode 100644
index 85ea06b3b5c6..000000000000
--- a/arch/ppc/configs/lopec_defconfig
+++ /dev/null
@@ -1,814 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-CONFIG_LOPEC=y
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_EPIC_SERIAL_MODE=y
-CONFIG_MPC10X_BRIDGE=y
-# CONFIG_MPC10X_STORE_GATHERING is not set
-CONFIG_PPCBUG_NVRAM=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-CONFIG_PCI_NAMES=y
-
-#
-# PCMCIA/CardBus support
-#
-# CONFIG_PCMCIA is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=m
-CONFIG_BLK_DEV_RAM_SIZE=4096
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_BLK_DEV_IDEDISK=y
-CONFIG_IDEDISK_MULTI_MODE=y
-# CONFIG_IDEDISK_STROKE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-CONFIG_BLK_DEV_ADMA=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB=m
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_UHCI_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Human Interface Devices (HID)
-#
-CONFIG_USB_HID=m
-
-#
-# Input core support is needed for USB HID input layer or HIDBP support
-#
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network adaptors
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/luan_defconfig b/arch/ppc/configs/luan_defconfig
deleted file mode 100644
index 71d7bf192e0e..000000000000
--- a/arch/ppc/configs/luan_defconfig
+++ /dev/null
@@ -1,668 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc2
-# Mon Jan 31 16:26:31 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-CONFIG_44x=y
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_EBONY is not set
-CONFIG_LUAN=y
-# CONFIG_OCOTEA is not set
-CONFIG_440SP=y
-CONFIG_440=y
-CONFIG_IBM_OCP=y
-CONFIG_IBM_EMAC4=y
-# CONFIG_PPC4xx_DMA is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_PM is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on console=ttyS0,115200"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PC-card bridges
-#
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=128
-CONFIG_IBM_EMAC_TXB=128
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-CONFIG_BDI_SWITCH=y
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/mbx_defconfig b/arch/ppc/configs/mbx_defconfig
deleted file mode 100644
index 52c3799e67ba..000000000000
--- a/arch/ppc/configs/mbx_defconfig
+++ /dev/null
@@ -1,512 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Platform support
-#
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_POWER3 is not set
-CONFIG_8xx=y
-
-#
-# IBM 4xx options
-#
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_SERIAL_CONSOLE=y
-CONFIG_NOT_COHERENT_CACHE=y
-# CONFIG_RPXLITE is not set
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-CONFIG_MBX=y
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-
-#
-# General setup
-#
-# CONFIG_HIGHMEM is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-CONFIG_KCORE_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_KERNEL_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_HOTPLUG is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# ATA/IDE/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI support
-#
-# CONFIG_SCSI is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-# CONFIG_NETFILTER is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_XFRM_USER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices (depends on LLC=y)
-#
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN_BOOL is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-CONFIG_SERIAL_CPM_SCC2=y
-CONFIG_SERIAL_CPM_SCC3=y
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# I2C Hardware Sensors Mainboard support
-#
-
-#
-# I2C Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_TMPFS=y
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-CONFIG_SCC1_ENET=y
-# CONFIG_SCC2_ENET is not set
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-CONFIG_8xx_CPU6=y
-# CONFIG_UCODE_PATCH is not set
-
-#
-# USB support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KALLSYMS is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/ml300_defconfig b/arch/ppc/configs/ml300_defconfig
deleted file mode 100644
index d66cacdb95be..000000000000
--- a/arch/ppc/configs/ml300_defconfig
+++ /dev/null
@@ -1,739 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Wed Jan 18 00:49:20 2006
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_LBD=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-# CONFIG_WANT_EARLY_SERIAL is not set
-
-#
-# IBM 4xx options
-#
-# CONFIG_BUBINGA is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-CONFIG_XILINX_ML300=y
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_XILINX_VIRTEX=y
-CONFIG_EMBEDDEDBOOT=y
-# CONFIG_PPC4xx_DMA is not set
-CONFIG_PPC_GEN550=y
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,9600"
-# CONFIG_PM is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=y
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-# CONFIG_IBM_EMAC is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/ml403_defconfig b/arch/ppc/configs/ml403_defconfig
deleted file mode 100644
index 71bcfa7ab7f7..000000000000
--- a/arch/ppc/configs/ml403_defconfig
+++ /dev/null
@@ -1,740 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc1
-# Wed Jan 18 01:11:41 2006
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_LBD=y
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-# CONFIG_WANT_EARLY_SERIAL is not set
-
-#
-# IBM 4xx options
-#
-# CONFIG_BUBINGA is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-# CONFIG_XILINX_ML300 is not set
-CONFIG_XILINX_ML403=y
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_XILINX_VIRTEX=y
-CONFIG_EMBEDDEDBOOT=y
-# CONFIG_PPC4xx_DMA is not set
-CONFIG_PPC_GEN550=y
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,9600"
-# CONFIG_PM is not set
-# CONFIG_HIBERNATION is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=y
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-# CONFIG_IBM_EMAC is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia Capabilities Port drivers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=y
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=y
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/mvme5100_defconfig b/arch/ppc/configs/mvme5100_defconfig
deleted file mode 100644
index 46776b9c1a33..000000000000
--- a/arch/ppc/configs/mvme5100_defconfig
+++ /dev/null
@@ -1,746 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.9-rc2
-# Wed Sep 22 09:53:26 2004
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_IOMAP=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-# CONFIG_TINY_SHMEM is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-CONFIG_MVME5100=y
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MVME5100_IPMC761_PRESENT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=8
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=32
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-# CONFIG_IP_NF_MATCH_LIMIT is not set
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-# CONFIG_IP_NF_MATCH_MAC is not set
-# CONFIG_IP_NF_MATCH_PKTTYPE is not set
-# CONFIG_IP_NF_MATCH_MARK is not set
-# CONFIG_IP_NF_MATCH_MULTIPORT is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_DSCP is not set
-# CONFIG_IP_NF_MATCH_AH_ESP is not set
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_TCPMSS is not set
-CONFIG_IP_NF_MATCH_HELPER=m
-# CONFIG_IP_NF_MATCH_STATE is not set
-# CONFIG_IP_NF_MATCH_CONNTRACK is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-# CONFIG_IP_NF_NAT is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_VELOCITY is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/ocotea_defconfig b/arch/ppc/configs/ocotea_defconfig
deleted file mode 100644
index 9dcf575c706f..000000000000
--- a/arch/ppc/configs/ocotea_defconfig
+++ /dev/null
@@ -1,599 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-CONFIG_44x=y
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_EBONY is not set
-CONFIG_OCOTEA=y
-CONFIG_440GX=y
-CONFIG_440A=y
-CONFIG_IBM_OCP=y
-CONFIG_IBM_EMAC4=y
-# CONFIG_PM is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on console=ttyS0,115200"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_IP_NF_CONNTRACK is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=128
-CONFIG_IBM_EMAC_TXB=128
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-CONFIG_BDI_SWITCH=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/pplus_defconfig b/arch/ppc/configs/pplus_defconfig
deleted file mode 100644
index 5e459bcbf591..000000000000
--- a/arch/ppc/configs/pplus_defconfig
+++ /dev/null
@@ -1,720 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-CONFIG_PPLUS=y
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_PPCBUG_NVRAM is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=y
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDEFLOPPY=y
-CONFIG_BLK_DEV_IDESCSI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
-CONFIG_SCSI_CONSTANTS=y
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_FTP=m
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_QUEUE is not set
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-# CONFIG_IP_NF_MATCH_IPRANGE is not set
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-# CONFIG_IP_NF_MATCH_RECENT is not set
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-# CONFIG_IP_NF_MATCH_LENGTH is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_TCPMSS is not set
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_FTP=m
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-CONFIG_IP_NF_TARGET_ULOG=m
-# CONFIG_IP_NF_TARGET_TCPMSS is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-# CONFIG_IP_NF_ARP_MANGLE is not set
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-CONFIG_CRC32=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/prep_defconfig b/arch/ppc/configs/prep_defconfig
deleted file mode 100644
index b7cee2d71405..000000000000
--- a/arch/ppc/configs/prep_defconfig
+++ /dev/null
@@ -1,1679 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Wed Sep  6 15:09:32 2006
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION="-prep"
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC601_SYNC_FIX=y
-# CONFIG_WANT_EARLY_SERIAL is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-CONFIG_PPC_PREP=y
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_RADSTONE_PPC7D is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-# CONFIG_EV64360 is not set
-CONFIG_PPCBUG_NVRAM=y
-# CONFIG_SMP is not set
-# CONFIG_HIGHMEM is not set
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_PREP_RESIDUAL=y
-CONFIG_PROC_PREPRESIDUAL=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-CONFIG_HIBERNATION=y
-CONFIG_PM_STD_PARTITION=""
-# CONFIG_SECCOMP is not set
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ISA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_I8259=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA is not set
-CONFIG_CARDBUS=y
-
-#
-# PC-card bridges
-#
-CONFIG_YENTA=m
-CONFIG_YENTA_O2=y
-CONFIG_YENTA_RICOH=y
-CONFIG_YENTA_TI=y
-CONFIG_YENTA_ENE_TUNE=y
-CONFIG_YENTA_TOSHIBA=y
-CONFIG_PCMCIA_PROBE=y
-CONFIG_PCCARD_NONSTATIC=m
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# Core Netfilter Configuration
-#
-CONFIG_NETFILTER_NETLINK=m
-CONFIG_NETFILTER_NETLINK_QUEUE=m
-CONFIG_NETFILTER_NETLINK_LOG=m
-CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CONNTRACK_NETLINK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
-CONFIG_IP_NF_QUEUE=m
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-CONFIG_WIRELESS_EXT=y
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=m
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_SERIAL=m
-CONFIG_PARPORT_PC_FIFO=y
-CONFIG_PARPORT_PC_SUPERIO=y
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_AX88796 is not set
-CONFIG_PARPORT_1284=y
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-CONFIG_BLK_DEV_FD=m
-# CONFIG_BLK_DEV_XD is not set
-# CONFIG_PARIDE is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-CONFIG_BLK_DEV_IDESCSI=y
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
-CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_NCR53C406A is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-CONFIG_IEEE1394=m
-
-#
-# Subsystem Options
-#
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-CONFIG_IEEE1394_OUI_DB=y
-CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
-CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
-# CONFIG_IEEE1394_EXPORT_FULL_API is not set
-
-#
-# Device Drivers
-#
-# CONFIG_IEEE1394_PCILYNX is not set
-CONFIG_IEEE1394_OHCI1394=m
-
-#
-# Protocol Drivers
-#
-CONFIG_IEEE1394_VIDEO1394=m
-CONFIG_IEEE1394_SBP2=m
-CONFIG_IEEE1394_ETH1394=m
-CONFIG_IEEE1394_DV1394=m
-CONFIG_IEEE1394_RAWIO=m
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
-# CONFIG_NET_VENDOR_SMC is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-CONFIG_DE2104X=y
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-CONFIG_DE4X5=m
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
-# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_PCMCIA_XIRTULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_NET_POCKET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-CONFIG_NET_RADIO=y
-# CONFIG_NET_WIRELESS_RTNETLINK is not set
-
-#
-# Obsolete Wireless cards support (pre-802.11)
-#
-# CONFIG_STRIP is not set
-# CONFIG_ARLAN is not set
-# CONFIG_WAVELAN is not set
-
-#
-# Wireless 802.11b ISA/PCI cards support
-#
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
-# CONFIG_AIRO is not set
-CONFIG_HERMES=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_ATMEL is not set
-
-#
-# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
-#
-# CONFIG_PRISM54 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_HOSTAP is not set
-CONFIG_NET_WIRELESS=y
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-# CONFIG_PPP_SYNC_TTY is not set
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPPOE=m
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-CONFIG_NETCONSOLE=m
-CONFIG_NETPOLL=y
-# CONFIG_NETPOLL_RX is not set
-# CONFIG_NETPOLL_TRAP is not set
-CONFIG_NET_POLL_CONTROLLER=y
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=m
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_PCSPKR=m
-CONFIG_INPUT_UINPUT=m
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_PRINTER is not set
-# CONFIG_PPDEV is not set
-# CONFIG_TIPAR is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-CONFIG_NVRAM=y
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_CT65550 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-CONFIG_FB_MATROX=y
-CONFIG_FB_MATROX_MILLENIUM=y
-CONFIG_FB_MATROX_MYSTIQUE=y
-CONFIG_FB_MATROX_G=y
-CONFIG_FB_MATROX_I2C=y
-CONFIG_FB_MATROX_MAVEN=m
-# CONFIG_FB_MATROX_MULTIHEAD is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_HWDEP=m
-CONFIG_SND_RAWMIDI=m
-CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-CONFIG_SND_MPU401_UART=m
-CONFIG_SND_OPL3_LIB=m
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ISA devices
-#
-CONFIG_SND_CS4231_LIB=m
-# CONFIG_SND_ADLIB is not set
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_CS4231 is not set
-CONFIG_SND_CS4232=m
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-# CONFIG_SND_MIRO is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_SGALAXY is not set
-# CONFIG_SND_SSCAPE is not set
-# CONFIG_SND_WAVEFRONT is not set
-
-#
-# PCI devices
-#
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-
-#
-# ALSA PowerMac devices
-#
-
-#
-# Apple Onboard Audio driver
-#
-# CONFIG_SND_AOA is not set
-# CONFIG_SND_AOA_SOUNDBUS is not set
-
-#
-# USB devices
-#
-CONFIG_SND_USB_AUDIO=m
-# CONFIG_SND_USB_USX2Y is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=m
-CONFIG_USB_EHCI_SPLIT_ISO=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-CONFIG_USB_UHCI_HCD=m
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-CONFIG_USB_HIDDEV=y
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-CONFIG_USB_EZUSB=y
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-CONFIG_REISERFS_FS=y
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_JFS_FS=m
-CONFIG_JFS_POSIX_ACL=y
-CONFIG_JFS_SECURITY=y
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
-CONFIG_XFS_POSIX_ACL=y
-# CONFIG_XFS_RT is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=m
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=y
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_XMON is not set
-# CONFIG_BDI_SWITCH is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/prpmc750_defconfig b/arch/ppc/configs/prpmc750_defconfig
deleted file mode 100644
index 82d52f66b742..000000000000
--- a/arch/ppc/configs/prpmc750_defconfig
+++ /dev/null
@@ -1,594 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-CONFIG_PRPMC750=y
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/prpmc800_defconfig b/arch/ppc/configs/prpmc800_defconfig
deleted file mode 100644
index 613c2664d3e8..000000000000
--- a/arch/ppc/configs/prpmc800_defconfig
+++ /dev/null
@@ -1,656 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-CONFIG_PRPMC800=y
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_NONMONARCH_SUPPORT is not set
-CONFIG_HARRIER=y
-# CONFIG_HARRIER_STORE_GATHERING is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-# CONFIG_CHR_DEV_SG is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_EEPRO100_PIO is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/radstone_ppc7d_defconfig b/arch/ppc/configs/radstone_ppc7d_defconfig
deleted file mode 100644
index 9f64532f2a81..000000000000
--- a/arch/ppc/configs/radstone_ppc7d_defconfig
+++ /dev/null
@@ -1,991 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-rc3
-# Tue Jul 26 00:02:09 2005
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_FPU=y
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_GEN550=y
-# CONFIG_PM is not set
-CONFIG_PPC_STD_MMU=y
-# CONFIG_NOT_COHERENT_CACHE is not set
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_KATANA is not set
-# CONFIG_WILLOW is not set
-# CONFIG_CPCI690 is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_CHESTNUT is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_HDPU is not set
-# CONFIG_EV64260 is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-CONFIG_RADSTONE_PPC7D=y
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX8260 is not set
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-# CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
-# CONFIG_MPC834x_SYS is not set
-CONFIG_MV64360=y
-CONFIG_MV64X60=y
-
-#
-# Set bridge options
-#
-CONFIG_MV64X60_BASE=0xfef00000
-CONFIG_MV64X60_NEW_BASE=0xfef00000
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=y
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,9600"
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Advanced setup
-#
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_HIGHMEM_START=0xfe000000
-# CONFIG_LOWMEM_SIZE_BOOL is not set
-CONFIG_LOWMEM_SIZE=0x30000000
-# CONFIG_KERNEL_START_BOOL is not set
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_TASK_SIZE_BOOL is not set
-CONFIG_TASK_SIZE=0x80000000
-# CONFIG_BOOT_LOAD_BOOL is not set
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
-CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
-CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_FC is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-CONFIG_SCSI_QLA2XXX=y
-# CONFIG_SCSI_QLA21XX is not set
-# CONFIG_SCSI_QLA22XX is not set
-# CONFIG_SCSI_QLA2300 is not set
-# CONFIG_SCSI_QLA2322 is not set
-# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-CONFIG_R8169=y
-CONFIG_R8169_NAPI=y
-# CONFIG_SKGE is not set
-CONFIG_SK98LIN=y
-# CONFIG_VIA_VELOCITY is not set
-CONFIG_TIGON3=y
-# CONFIG_BNX2 is not set
-CONFIG_MV643XX_ETH=y
-CONFIG_MV643XX_ETH_0=y
-CONFIG_MV643XX_ETH_1=y
-# CONFIG_MV643XX_ETH_2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=y
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-# CONFIG_VT_CONSOLE is not set
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_MPSC=y
-# CONFIG_SERIAL_MPSC_CONSOLE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-CONFIG_I2C_MV64XXX=y
-CONFIG_I2C_SENSOR=y
-
-#
-# Miscellaneous I2C Chip support
-#
-CONFIG_SENSORS_DS1337=y
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-CONFIG_SENSORS_LM90=y
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# SN Devices
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=y
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/ppc/configs/redwood5_defconfig b/arch/ppc/configs/redwood5_defconfig
deleted file mode 100644
index 4c5486da4139..000000000000
--- a/arch/ppc/configs/redwood5_defconfig
+++ /dev/null
@@ -1,557 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_OAK is not set
-CONFIG_REDWOOD_5=y
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_PPC_OCP=y
-CONFIG_STB03xxx=y
-CONFIG_IBM_OPENBIOS=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-# CONFIG_SERIAL_SICC is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDE_TASKFILE_IO is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IBM_EMAC is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/redwood6_defconfig b/arch/ppc/configs/redwood6_defconfig
deleted file mode 100644
index 5752845c2601..000000000000
--- a/arch/ppc/configs/redwood6_defconfig
+++ /dev/null
@@ -1,535 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-CONFIG_REDWOOD_6=y
-# CONFIG_SYCAMORE is not set
-# CONFIG_WALNUT is not set
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_PPC_OCP=y
-CONFIG_STB03xxx=y
-CONFIG_IBM_OPENBIOS=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-# CONFIG_SERIAL_SICC is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IBM_EMAC is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC32 is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/rpx8260_defconfig b/arch/ppc/configs/rpx8260_defconfig
deleted file mode 100644
index a9c4544ae560..000000000000
--- a/arch/ppc/configs/rpx8260_defconfig
+++ /dev/null
@@ -1,555 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_E500 is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBC82xx is not set
-# CONFIG_SBS8260 is not set
-CONFIG_RPX8260=y
-# CONFIG_TQM8260 is not set
-# CONFIG_ADS8272 is not set
-CONFIG_8260=y
-CONFIG_CPM2=y
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-# CONFIG_SERIAL_CPM_SMC2 is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-# CONFIG_SCC_ENET is not set
-CONFIG_FEC_ENET=y
-# CONFIG_USE_MDIO is not set
-
-#
-# CPM2 Options
-#
-# CONFIG_FCC1_ENET is not set
-# CONFIG_FCC2_ENET is not set
-CONFIG_FCC3_ENET=y
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_KGDB_CONSOLE is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/rpxcllf_defconfig b/arch/ppc/configs/rpxcllf_defconfig
deleted file mode 100644
index cf932f13fa86..000000000000
--- a/arch/ppc/configs/rpxcllf_defconfig
+++ /dev/null
@@ -1,582 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc1
-# Mon Nov  1 16:41:04 2004
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SHMEM is not set
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_TINY_SHMEM=y
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-CONFIG_8xx=y
-# CONFIG_E500 is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_RPXLITE is not set
-CONFIG_RPXCLASSIC=y
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-CONFIG_SERIAL_CPM_SCC2=y
-CONFIG_SERIAL_CPM_SCC3=y
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-CONFIG_SERIAL_CPM_SMC2=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-CONFIG_SCC1_ENET=y
-# CONFIG_SCC2_ENET is not set
-# CONFIG_SCC3_ENET is not set
-CONFIG_FEC_ENET=y
-# CONFIG_USE_MDIO is not set
-CONFIG_ENET_BIG_BUFFERS=y
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-CONFIG_NO_UCODE_PATCH=y
-# CONFIG_USB_SOF_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/rpxlite_defconfig b/arch/ppc/configs/rpxlite_defconfig
deleted file mode 100644
index 828dd6eb5b43..000000000000
--- a/arch/ppc/configs/rpxlite_defconfig
+++ /dev/null
@@ -1,581 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc1
-# Mon Nov  1 16:41:09 2004
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-# CONFIG_CLEAN_COMPILE is not set
-CONFIG_BROKEN=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_KOBJECT_UEVENT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SHMEM is not set
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_TINY_SHMEM=y
-
-#
-# Loadable module support
-#
-# CONFIG_MODULES is not set
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-CONFIG_8xx=y
-# CONFIG_E500 is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_CPU_FREQ is not set
-CONFIG_EMBEDDEDBOOT=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-CONFIG_RPXLITE=y
-# CONFIG_RPXCLASSIC is not set
-# CONFIG_BSEIP is not set
-# CONFIG_FADS is not set
-# CONFIG_TQM823L is not set
-# CONFIG_TQM850L is not set
-# CONFIG_TQM855L is not set
-# CONFIG_TQM860L is not set
-# CONFIG_FPS850L is not set
-# CONFIG_SPD823TS is not set
-# CONFIG_IVMS8 is not set
-# CONFIG_IVML24 is not set
-# CONFIG_SM850 is not set
-# CONFIG_HERMES_PRO is not set
-# CONFIG_IP860 is not set
-# CONFIG_LWMON is not set
-# CONFIG_PCU_E is not set
-# CONFIG_CCM is not set
-# CONFIG_LANTEC is not set
-# CONFIG_MBX is not set
-# CONFIG_WINCEPT is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_CMDLINE_BOOL is not set
-
-#
-# Bus options
-#
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS is not set
-# CONFIG_PCI_QSPAN is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_LBD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_OAKNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CPM=y
-CONFIG_SERIAL_CPM_CONSOLE=y
-# CONFIG_SERIAL_CPM_SCC1 is not set
-# CONFIG_SERIAL_CPM_SCC2 is not set
-# CONFIG_SERIAL_CPM_SCC3 is not set
-# CONFIG_SERIAL_CPM_SCC4 is not set
-CONFIG_SERIAL_CPM_SMC1=y
-# CONFIG_SERIAL_CPM_SMC2 is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# MPC8xx CPM Options
-#
-CONFIG_SCC_ENET=y
-# CONFIG_SCC1_ENET is not set
-CONFIG_SCC2_ENET=y
-# CONFIG_SCC3_ENET is not set
-# CONFIG_FEC_ENET is not set
-# CONFIG_ENET_BIG_BUFFERS is not set
-
-#
-# Generic MPC8xx Options
-#
-CONFIG_8xx_COPYBACK=y
-# CONFIG_8xx_CPU6 is not set
-CONFIG_NO_UCODE_PATCH=y
-# CONFIG_USB_SOF_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_UCODE_PATCH is not set
-# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/sandpoint_defconfig b/arch/ppc/configs/sandpoint_defconfig
deleted file mode 100644
index 9525e34138fc..000000000000
--- a/arch/ppc/configs/sandpoint_defconfig
+++ /dev/null
@@ -1,737 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_HOTPLUG=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-CONFIG_ALTIVEC=y
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-# CONFIG_SPRUCE is not set
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-CONFIG_SANDPOINT=y
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_GEN550=y
-CONFIG_EPIC_SERIAL_MODE=y
-CONFIG_MPC10X_BRIDGE=y
-# CONFIG_MPC10X_STORE_GATHERING is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_MISC=m
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# PCMCIA/CardBus support
-#
-# CONFIG_PCMCIA is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_TASKFILE_IO=y
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_BLK_DEV_SL82C105=y
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_VORTEX=y
-# CONFIG_TYPHOON is not set
-
-#
-# Tulip family network device support
-#
-CONFIG_NET_TULIP=y
-# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-# CONFIG_TULIP_MMIO is not set
-# CONFIG_TULIP_NAPI is not set
-# CONFIG_DE4X5 is not set
-# CONFIG_WINBOND_840 is not set
-# CONFIG_DM9102 is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_E100_NAPI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_I8042 is not set
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_UHCI_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_BLUETOOTH_TTY is not set
-CONFIG_USB_ACM=m
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_STORAGE is not set
-
-#
-# USB Human Interface Devices (HID)
-#
-# CONFIG_USB_HID is not set
-
-#
-# Input core support is needed for USB HID input layer or HIDBP support
-#
-
-#
-# USB HID Boot Protocol drivers
-#
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
-#
-# USB Network adaptors
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-CONFIG_USB_SERIAL=m
-# CONFIG_USB_SERIAL_GENERIC is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-CONFIG_USB_SERIAL_VISOR=m
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_ZLIB_DEFLATE=m
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/spruce_defconfig b/arch/ppc/configs/spruce_defconfig
deleted file mode 100644
index 430dd9c59feb..000000000000
--- a/arch/ppc/configs/spruce_defconfig
+++ /dev/null
@@ -1,577 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-CONFIG_KALLSYMS=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-CONFIG_6xx=y
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_ALTIVEC is not set
-# CONFIG_TAU is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_PPC_STD_MMU=y
-
-#
-# Platform options
-#
-# CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_APUS is not set
-# CONFIG_WILLOW is not set
-# CONFIG_PCORE is not set
-# CONFIG_POWERPMC250 is not set
-# CONFIG_EV64260 is not set
-CONFIG_SPRUCE=y
-# CONFIG_LOPEC is not set
-# CONFIG_MCPN765 is not set
-# CONFIG_MVME5100 is not set
-# CONFIG_PPLUS is not set
-# CONFIG_PRPMC750 is not set
-# CONFIG_PRPMC800 is not set
-# CONFIG_SANDPOINT is not set
-# CONFIG_ADIR is not set
-# CONFIG_K2 is not set
-# CONFIG_PAL4 is not set
-# CONFIG_GEMINI is not set
-# CONFIG_EST8260 is not set
-# CONFIG_SBS8260 is not set
-# CONFIG_RPX6 is not set
-# CONFIG_TQM8260 is not set
-CONFIG_PPC_GEN550=y
-CONFIG_SPRUCE_BAUD_33M=y
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00800000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Userland interfaces
-#
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-CONFIG_SERIO_PCIPS2=y
-
-#
-# Input Device Drivers
-#
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/sycamore_defconfig b/arch/ppc/configs/sycamore_defconfig
deleted file mode 100644
index 6996cca18f3e..000000000000
--- a/arch/ppc/configs/sycamore_defconfig
+++ /dev/null
@@ -1,663 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-CONFIG_MODVERSIONS=y
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_EVB405EP is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-CONFIG_SYCAMORE=y
-# CONFIG_WALNUT is not set
-CONFIG_IBM_OCP=y
-CONFIG_PPC_OCP=y
-CONFIG_BIOS_FIXUP=y
-CONFIG_405GPR=y
-CONFIG_IBM_OPENBIOS=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-CONFIG_NETDEVICES=y
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-CONFIG_IBM_EMAC=y
-# CONFIG_IBM_EMAC_ERRMSG is not set
-CONFIG_IBM_EMAC_RXB=64
-CONFIG_IBM_EMAC_TXB=8
-CONFIG_IBM_EMAC_FGAP=8
-CONFIG_IBM_EMAC_SKBRES=0
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Hardware Sensors Chip support
-#
-# CONFIG_I2C_SENSOR is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-
-#
-# Other I2C Chip support
-#
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/taishan_defconfig b/arch/ppc/configs/taishan_defconfig
deleted file mode 100644
index 1ca0204267b1..000000000000
--- a/arch/ppc/configs/taishan_defconfig
+++ /dev/null
@@ -1,1077 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Mon Feb 12 11:11:58 2007
-#
-CONFIG_MMU=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-# CONFIG_40x is not set
-CONFIG_44x=y
-# CONFIG_8xx is not set
-# CONFIG_E200 is not set
-# CONFIG_E500 is not set
-CONFIG_PPC_DCR_NATIVE=y
-CONFIG_PPC_DCR=y
-CONFIG_BOOKE=y
-CONFIG_PTE_64BIT=y
-CONFIG_PHYS_64BIT=y
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_KEXEC is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-CONFIG_WANT_EARLY_SERIAL=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_BAMBOO is not set
-# CONFIG_EBONY is not set
-# CONFIG_LUAN is not set
-# CONFIG_YUCCA is not set
-# CONFIG_OCOTEA is not set
-CONFIG_TAISHAN=y
-CONFIG_440GX=y
-CONFIG_440A=y
-CONFIG_IBM_OCP=y
-CONFIG_IBM_EMAC4=y
-CONFIG_PPC4xx_DMA=y
-CONFIG_PPC4xx_EDMA=y
-CONFIG_PPC_GEN550=y
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_RESOURCES_64BIT=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on console=ttyS0,115200"
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_PPC_I8259 is not set
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_BOOT_LOAD=0x01000000
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_MULTIPLE_TABLES is not set
-# CONFIG_IP_ROUTE_MULTIPATH is not set
-# CONFIG_IP_ROUTE_VERBOSE is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-CONFIG_BRIDGE=y
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_NAND_CAFE is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_WINDFARM is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-CONFIG_IBM_EMAC=y
-CONFIG_IBM_EMAC_RXB=128
-CONFIG_IBM_EMAC_TXB=128
-CONFIG_IBM_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
-CONFIG_IBM_EMAC_PHY_RX_CLK_FIX=y
-# CONFIG_IBM_EMAC_DEBUG is not set
-CONFIG_IBM_EMAC_ZMII=y
-CONFIG_IBM_EMAC_RGMII=y
-CONFIG_IBM_EMAC_TAH=y
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_B44 is not set
-# CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
-# CONFIG_EEPRO100 is not set
-CONFIG_E100=y
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-CONFIG_PPP=y
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPP_DEFLATE is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPPOE=y
-# CONFIG_SLIP is not set
-CONFIG_SLHC=y
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IBM_IIC=y
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_SENSORS_EEPROM=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_EXT4DEV_FS is not set
-CONFIG_JBD=y
-CONFIG_JBD_DEBUG=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_KGDB is not set
-# CONFIG_XMON is not set
-CONFIG_BDI_SWITCH=y
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/configs/walnut_defconfig b/arch/ppc/configs/walnut_defconfig
deleted file mode 100644
index bf9721a7a818..000000000000
--- a/arch/ppc/configs/walnut_defconfig
+++ /dev/null
@@ -1,578 +0,0 @@
-#
-# Automatically generated make config: don't edit
-#
-CONFIG_MMU=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_HAVE_DEC_LOCK=y
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_GENERIC_NVRAM=y
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
-# CONFIG_STANDALONE is not set
-CONFIG_BROKEN_ON_SMP=y
-
-#
-# General setup
-#
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_FUTEX=y
-# CONFIG_EPOLL is not set
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODVERSIONS is not set
-CONFIG_KMOD=y
-
-#
-# Processor
-#
-# CONFIG_6xx is not set
-CONFIG_40x=y
-# CONFIG_44x is not set
-# CONFIG_POWER3 is not set
-# CONFIG_POWER4 is not set
-# CONFIG_8xx is not set
-# CONFIG_MATH_EMULATION is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_4xx=y
-
-#
-# IBM 4xx options
-#
-# CONFIG_ASH is not set
-# CONFIG_BUBINGA is not set
-# CONFIG_CPCI405 is not set
-# CONFIG_EP405 is not set
-# CONFIG_OAK is not set
-# CONFIG_REDWOOD_5 is not set
-# CONFIG_REDWOOD_6 is not set
-# CONFIG_SYCAMORE is not set
-CONFIG_WALNUT=y
-CONFIG_IBM405_ERR77=y
-CONFIG_IBM405_ERR51=y
-CONFIG_IBM_OCP=y
-CONFIG_BIOS_FIXUP=y
-CONFIG_405GP=y
-CONFIG_IBM_OPENBIOS=y
-# CONFIG_PM is not set
-CONFIG_UART0_TTYS0=y
-# CONFIG_UART0_TTYS1 is not set
-CONFIG_NOT_COHERENT_CACHE=y
-
-#
-# Platform options
-#
-# CONFIG_PC_KEYBOARD is not set
-# CONFIG_SMP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_KERNEL_ELF=y
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="ip=on"
-
-#
-# Bus options
-#
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
-# CONFIG_PCI_NAMES is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_HIGHMEM_START=0xfe000000
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_TASK_SIZE=0x80000000
-CONFIG_BOOT_LOAD=0x00400000
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_CARMEL is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_LBD is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Macintosh device drivers
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_OAKNET is not set
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NET_PCI is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# Misc devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_FAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-# CONFIG_EXPORTFS is not set
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# IBM 40x options
-#
-
-#
-# Library routines
-#
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-CONFIG_PPC_OCP=y
-
-#
-# Security options
-#
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
deleted file mode 100644
index 7b739054968f..000000000000
--- a/arch/ppc/kernel/Makefile
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-extra-$(CONFIG_PPC_STD_MMU)	:= head.o
-extra-$(CONFIG_40x)		:= head_4xx.o
-extra-$(CONFIG_44x)		:= head_44x.o
-extra-$(CONFIG_8xx)		:= head_8xx.o
-extra-y				+= vmlinux.lds
-
-obj-y				:= entry.o traps.o time.o misc.o \
-					setup.o \
-					ppc_htab.o
-obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
-obj-$(CONFIG_PCI)		+= pci.o
-obj-$(CONFIG_KGDB)		+= ppc-stub.o
-obj-$(CONFIG_SMP)		+= smp.o smp-tbsync.o
-obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
-
-ifndef CONFIG_MATH_EMULATION
-obj-$(CONFIG_8xx)		+= softemu8xx.o
-endif
diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c
deleted file mode 100644
index 8dcbdd6c2d2c..000000000000
--- a/arch/ppc/kernel/asm-offsets.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/suspend.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/kbuild.h>
-
-#include <asm/io.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/vdso_datapage.h>
-
-int
-main(void)
-{
-	DEFINE(THREAD, offsetof(struct task_struct, thread));
-	DEFINE(THREAD_INFO, offsetof(struct task_struct, stack));
-	DEFINE(MM, offsetof(struct task_struct, mm));
-	DEFINE(PTRACE, offsetof(struct task_struct, ptrace));
-	DEFINE(KSP, offsetof(struct thread_struct, ksp));
-	DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
-	DEFINE(PT_REGS, offsetof(struct thread_struct, regs));
-	DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode));
-	DEFINE(THREAD_FPR0, offsetof(struct thread_struct, fpr[0]));
-	DEFINE(THREAD_FPSCR, offsetof(struct thread_struct, fpscr));
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0));
-	DEFINE(PT_PTRACED, PT_PTRACED);
-#endif
-#ifdef CONFIG_ALTIVEC
-	DEFINE(THREAD_VR0, offsetof(struct thread_struct, vr[0]));
-	DEFINE(THREAD_VRSAVE, offsetof(struct thread_struct, vrsave));
-	DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr));
-	DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr));
-#endif /* CONFIG_ALTIVEC */
-	/* Interrupt register frame */
-	DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD);
-	DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs));
-	/* in fact we only use gpr0 - gpr9 and gpr20 - gpr23 */
-	DEFINE(GPR0, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[0]));
-	DEFINE(GPR1, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[1]));
-	DEFINE(GPR2, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[2]));
-	DEFINE(GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[3]));
-	DEFINE(GPR4, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[4]));
-	DEFINE(GPR5, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[5]));
-	DEFINE(GPR6, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[6]));
-	DEFINE(GPR7, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[7]));
-	DEFINE(GPR8, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[8]));
-	DEFINE(GPR9, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[9]));
-	DEFINE(GPR10, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[10]));
-	DEFINE(GPR11, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[11]));
-	DEFINE(GPR12, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[12]));
-	DEFINE(GPR13, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[13]));
-	DEFINE(GPR14, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[14]));
-	DEFINE(GPR15, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[15]));
-	DEFINE(GPR16, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[16]));
-	DEFINE(GPR17, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[17]));
-	DEFINE(GPR18, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[18]));
-	DEFINE(GPR19, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[19]));
-	DEFINE(GPR20, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[20]));
-	DEFINE(GPR21, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[21]));
-	DEFINE(GPR22, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[22]));
-	DEFINE(GPR23, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[23]));
-	DEFINE(GPR24, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[24]));
-	DEFINE(GPR25, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[25]));
-	DEFINE(GPR26, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[26]));
-	DEFINE(GPR27, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[27]));
-	DEFINE(GPR28, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[28]));
-	DEFINE(GPR29, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[29]));
-	DEFINE(GPR30, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[30]));
-	DEFINE(GPR31, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[31]));
-	/* Note: these symbols include _ because they overlap with special
-	 * register names
-	 */
-	DEFINE(_NIP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, nip));
-	DEFINE(_MSR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, msr));
-	DEFINE(_CTR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ctr));
-	DEFINE(_LINK, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, link));
-	DEFINE(_CCR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ccr));
-	DEFINE(_MQ, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, mq));
-	DEFINE(_XER, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, xer));
-	DEFINE(_DAR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dar));
-	DEFINE(_DSISR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dsisr));
-	/* The PowerPC 400-class & Book-E processors have neither the DAR nor the DSISR
-	 * SPRs. Hence, we overload them to hold the similar DEAR and ESR SPRs
-	 * for such processors.  For critical interrupts we use them to
-	 * hold SRR0 and SRR1.
-	 */
-	DEFINE(_DEAR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dar));
-	DEFINE(_ESR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dsisr));
-	DEFINE(ORIG_GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, orig_gpr3));
-	DEFINE(RESULT, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, result));
-	DEFINE(TRAP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, trap));
-	DEFINE(CLONE_VM, CLONE_VM);
-	DEFINE(CLONE_UNTRACED, CLONE_UNTRACED);
-	DEFINE(MM_PGD, offsetof(struct mm_struct, pgd));
-
-	/* About the CPU features table */
-	DEFINE(CPU_SPEC_ENTRY_SIZE, sizeof(struct cpu_spec));
-	DEFINE(CPU_SPEC_PVR_MASK, offsetof(struct cpu_spec, pvr_mask));
-	DEFINE(CPU_SPEC_PVR_VALUE, offsetof(struct cpu_spec, pvr_value));
-	DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features));
-	DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup));
-
-	DEFINE(TI_TASK, offsetof(struct thread_info, task));
-	DEFINE(TI_EXECDOMAIN, offsetof(struct thread_info, exec_domain));
-	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
-	DEFINE(TI_LOCAL_FLAGS, offsetof(struct thread_info, local_flags));
-	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
-	DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count));
-
-	DEFINE(pbe_address, offsetof(struct pbe, address));
-	DEFINE(pbe_orig_address, offsetof(struct pbe, orig_address));
-	DEFINE(pbe_next, offsetof(struct pbe, next));
-
-	DEFINE(TASK_SIZE, TASK_SIZE);
-	DEFINE(NUM_USER_SEGMENTS, TASK_SIZE>>28);
-
-	/* datapage offsets for use by vdso */
-	DEFINE(CFG_TB_ORIG_STAMP, offsetof(struct vdso_data, tb_orig_stamp));
-	DEFINE(CFG_TB_TICKS_PER_SEC, offsetof(struct vdso_data, tb_ticks_per_sec));
-	DEFINE(CFG_TB_TO_XS, offsetof(struct vdso_data, tb_to_xs));
-	DEFINE(CFG_STAMP_XSEC, offsetof(struct vdso_data, stamp_xsec));
-	DEFINE(CFG_TB_UPDATE_COUNT, offsetof(struct vdso_data, tb_update_count));
-	DEFINE(CFG_TZ_MINUTEWEST, offsetof(struct vdso_data, tz_minuteswest));
-	DEFINE(CFG_TZ_DSTTIME, offsetof(struct vdso_data, tz_dsttime));
-	DEFINE(CFG_SYSCALL_MAP32, offsetof(struct vdso_data, syscall_map_32));
-	DEFINE(WTOM_CLOCK_SEC, offsetof(struct vdso_data, wtom_clock_sec));
-	DEFINE(WTOM_CLOCK_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
-	DEFINE(TVAL32_TV_SEC, offsetof(struct timeval, tv_sec));
-	DEFINE(TVAL32_TV_USEC, offsetof(struct timeval, tv_usec));
-	DEFINE(TSPEC32_TV_SEC, offsetof(struct timespec, tv_sec));
-	DEFINE(TSPEC32_TV_NSEC, offsetof(struct timespec, tv_nsec));
-
-	/* timeval/timezone offsets for use by vdso */
-	DEFINE(TZONE_TZ_MINWEST, offsetof(struct timezone, tz_minuteswest));
-	DEFINE(TZONE_TZ_DSTTIME, offsetof(struct timezone, tz_dsttime));
-
-	/* Other bits used by the vdso */
-	DEFINE(CLOCK_REALTIME, CLOCK_REALTIME);
-	DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC);
-	DEFINE(NSEC_PER_SEC, NSEC_PER_SEC);
-	DEFINE(CLOCK_REALTIME_RES, TICK_NSEC);
-
-	return 0;
-}
diff --git a/arch/ppc/kernel/cpu_setup_power4.S b/arch/ppc/kernel/cpu_setup_power4.S
deleted file mode 100644
index 6a674e834eeb..000000000000
--- a/arch/ppc/kernel/cpu_setup_power4.S
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * This file contains low level CPU setup functions.
- *    Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/ppc_asm.h>
-#include <asm/cputable.h>
-#include <asm/asm-offsets.h>
-#include <asm/cache.h>
-
-_GLOBAL(__970_cpu_preinit)
-	/*
-	 * Deal only with PPC970 and PPC970FX.
-	 */
-	mfspr	r0,SPRN_PVR
-	srwi	r0,r0,16
-	cmpwi	cr0,r0,0x39
-	cmpwi	cr1,r0,0x3c
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
-	bnelr
-
-	/* Make sure HID4:rm_ci is off before MMU is turned off, that large
-	 * pages are enabled with HID4:61 and clear HID5:DCBZ_size and
-	 * HID5:DCBZ32_ill
-	 */
-	li	r0,0
-	mfspr	r11,SPRN_HID4
-	rldimi	r11,r0,40,23	/* clear bit 23 (rm_ci) */
-	rldimi	r11,r0,2,61	/* clear bit 61 (lg_pg_en) */
-	sync
-	mtspr	SPRN_HID4,r11
-	isync
-	sync
-	mfspr	r11,SPRN_HID5
-	rldimi	r11,r0,6,56	/* clear bits 56 & 57 (DCBZ*) */
-	sync
-	mtspr	SPRN_HID5,r11
-	isync
-	sync
-
-	/* Setup some basic HID1 features */
-	mfspr	r0,SPRN_HID1
-	li	r11,0x1200		/* enable i-fetch cacheability */
-	sldi	r11,r11,44		/* and prefetch */
-	or	r0,r0,r11
-	mtspr	SPRN_HID1,r0
-	mtspr	SPRN_HID1,r0
-	isync
-
-	/* Clear HIOR */
-	li	r0,0
-	sync
-	mtspr	SPRN_HIOR,0		/* Clear interrupt prefix */
-	isync
-	blr
-
-_GLOBAL(__setup_cpu_ppc970)
-	mfspr	r0,SPRN_HID0
-	li	r11,5			/* clear DOZE and SLEEP */
-	rldimi	r0,r11,52,8		/* set NAP and DPM */
-	mtspr	SPRN_HID0,r0
-	mfspr	r0,SPRN_HID0
-	mfspr	r0,SPRN_HID0
-	mfspr	r0,SPRN_HID0
-	mfspr	r0,SPRN_HID0
-	mfspr	r0,SPRN_HID0
-	mfspr	r0,SPRN_HID0
-	sync
-	isync
-	blr
-
-/* Definitions for the table use to save CPU states */
-#define CS_HID0		0
-#define CS_HID1		8
-#define	CS_HID4		16
-#define CS_HID5		24
-#define CS_SIZE		32
-
-	.data
-	.balign	L1_CACHE_BYTES
-cpu_state_storage:	
-	.space	CS_SIZE
-	.balign	L1_CACHE_BYTES,0
-	.text
-	
-/* Called in normal context to backup CPU 0 state. This
- * does not include cache settings. This function is also
- * called for machine sleep. This does not include the MMU
- * setup, BATs, etc... but rather the "special" registers
- * like HID0, HID1, HID4, etc...
- */
-_GLOBAL(__save_cpu_setup)
-	/* Some CR fields are volatile, we back it up all */
-	mfcr	r7
-
-	/* Get storage ptr */
-	lis	r5,cpu_state_storage@h
-	ori	r5,r5,cpu_state_storage@l
-
-	/* We only deal with 970 for now */
-	mfspr	r0,SPRN_PVR
-	srwi	r0,r0,16
-	cmpwi	cr0,r0,0x39
-	cmpwi	cr1,r0,0x3c
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
-	bne	1f
-
-	/* Save HID0,1,4 and 5 */
-	mfspr	r3,SPRN_HID0
-	std	r3,CS_HID0(r5)
-	mfspr	r3,SPRN_HID1
-	std	r3,CS_HID1(r5)
-	mfspr	r3,SPRN_HID4
-	std	r3,CS_HID4(r5)
-	mfspr	r3,SPRN_HID5
-	std	r3,CS_HID5(r5)
-	
-1:
-	mtcr	r7
-	blr
-
-/* Called with no MMU context (typically MSR:IR/DR off) to
- * restore CPU state as backed up by the previous
- * function. This does not include cache setting
- */
-_GLOBAL(__restore_cpu_setup)
-	/* Some CR fields are volatile, we back it up all */
-	mfcr	r7
-
-	/* Get storage ptr */
-	lis	r5,(cpu_state_storage-KERNELBASE)@h
-	ori	r5,r5,cpu_state_storage@l
-
-	/* We only deal with 970 for now */
-	mfspr	r0,SPRN_PVR
-	srwi	r0,r0,16
-	cmpwi	cr0,r0,0x39
-	cmpwi	cr1,r0,0x3c
-	cror	4*cr0+eq,4*cr0+eq,4*cr1+eq
-	bne	1f
-
-	/* Clear interrupt prefix */
-	li	r0,0
-	sync
-	mtspr	SPRN_HIOR,0
-	isync
-
-	/* Restore HID0 */
-	ld	r3,CS_HID0(r5)
-	sync
-	isync
-	mtspr	SPRN_HID0,r3
-	mfspr	r3,SPRN_HID0
-	mfspr	r3,SPRN_HID0
-	mfspr	r3,SPRN_HID0
-	mfspr	r3,SPRN_HID0
-	mfspr	r3,SPRN_HID0
-	mfspr	r3,SPRN_HID0
-	sync
-	isync
-
-	/* Restore HID1 */
-	ld	r3,CS_HID1(r5)
-	sync
-	isync
-	mtspr	SPRN_HID1,r3
-	mtspr	SPRN_HID1,r3
-	sync
-	isync
-	
-	/* Restore HID4 */
-	ld	r3,CS_HID4(r5)
-	sync
-	isync
-	mtspr	SPRN_HID4,r3
-	sync
-	isync
-
-	/* Restore HID5 */
-	ld	r3,CS_HID5(r5)
-	sync
-	isync
-	mtspr	SPRN_HID5,r3
-	sync
-	isync
-1:
-	mtcr	r7
-	blr
-
diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S
deleted file mode 100644
index 5f3a5d068a5c..000000000000
--- a/arch/ppc/kernel/entry.S
+++ /dev/null
@@ -1,960 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *  Rewritten by Cort Dougan (cort@fsmlabs.com) for PReP
- *    Copyright (C) 1996 Cort Dougan <cort@fsmlabs.com>
- *  Adapted for Power Macintosh by Paul Mackerras.
- *  Low-level exception handlers and MMU support
- *  rewritten by Paul Mackerras.
- *    Copyright (C) 1996 Paul Mackerras.
- *  MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
- *
- *  This file contains the system call entry code, context switch
- *  code, and exception/interrupt return code for PowerPC.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/errno.h>
-#include <linux/sys.h>
-#include <linux/threads.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/unistd.h>
-
-#undef SHOW_SYSCALLS
-#undef SHOW_SYSCALLS_TASK
-
-/*
- * MSR_KERNEL is > 0x10000 on 4xx/Book-E since it include MSR_CE.
- */
-#if MSR_KERNEL >= 0x10000
-#define LOAD_MSR_KERNEL(r, x)	lis r,(x)@h; ori r,r,(x)@l
-#else
-#define LOAD_MSR_KERNEL(r, x)	li r,(x)
-#endif
-
-#ifdef CONFIG_BOOKE
-#include "head_booke.h"
-#define TRANSFER_TO_HANDLER_EXC_LEVEL(exc_level)	\
-	mtspr	exc_level##_SPRG,r8;			\
-	BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);		\
-	lwz	r0,GPR10-INT_FRAME_SIZE(r8);		\
-	stw	r0,GPR10(r11);				\
-	lwz	r0,GPR11-INT_FRAME_SIZE(r8);		\
-	stw	r0,GPR11(r11);				\
-	mfspr	r8,exc_level##_SPRG
-
-	.globl	mcheck_transfer_to_handler
-mcheck_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(MCHECK)
-	b	transfer_to_handler_full
-
-	.globl	debug_transfer_to_handler
-debug_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(DEBUG)
-	b	transfer_to_handler_full
-
-	.globl	crit_transfer_to_handler
-crit_transfer_to_handler:
-	TRANSFER_TO_HANDLER_EXC_LEVEL(CRIT)
-	/* fall through */
-#endif
-
-#ifdef CONFIG_40x
-	.globl	crit_transfer_to_handler
-crit_transfer_to_handler:
-	lwz	r0,crit_r10@l(0)
-	stw	r0,GPR10(r11)
-	lwz	r0,crit_r11@l(0)
-	stw	r0,GPR11(r11)
-	/* fall through */
-#endif
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception, turning
- * on address translation.
- * Note that we rely on the caller having set cr0.eq iff the exception
- * occurred in kernel mode (i.e. MSR:PR = 0).
- */
-	.globl	transfer_to_handler_full
-transfer_to_handler_full:
-	SAVE_NVGPRS(r11)
-	/* fall through */
-
-	.globl	transfer_to_handler
-transfer_to_handler:
-	stw	r2,GPR2(r11)
-	stw	r12,_NIP(r11)
-	stw	r9,_MSR(r11)
-	andi.	r2,r9,MSR_PR
-	mfctr	r12
-	mfspr	r2,SPRN_XER
-	stw	r12,_CTR(r11)
-	stw	r2,_XER(r11)
-	mfspr	r12,SPRN_SPRG3
-	addi	r2,r12,-THREAD
-	tovirt(r2,r2)			/* set r2 to current */
-	beq	2f			/* if from user, fix up THREAD.regs */
-	addi	r11,r1,STACK_FRAME_OVERHEAD
-	stw	r11,PT_REGS(r12)
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-	/* Check to see if the dbcr0 register is set up to debug.  Use the
-	   single-step bit to do this. */
-	lwz	r12,THREAD_DBCR0(r12)
-	andis.	r12,r12,DBCR0_IC@h
-	beq+	3f
-	/* From user and task is ptraced - load up global dbcr0 */
-	li	r12,-1			/* clear all pending debug events */
-	mtspr	SPRN_DBSR,r12
-	lis	r11,global_dbcr0@ha
-	tophys(r11,r11)
-	addi	r11,r11,global_dbcr0@l
-	lwz	r12,0(r11)
-	mtspr	SPRN_DBCR0,r12
-	lwz	r12,4(r11)
-	addi	r12,r12,-1
-	stw	r12,4(r11)
-#endif
-	b	3f
-
-2:	/* if from kernel, check interrupted DOZE/NAP mode and
-         * check for stack overflow
-         */
-	lwz	r9,THREAD_INFO-THREAD(r12)
-	cmplw	r1,r9			/* if r1 <= current->thread_info */
-	ble-	stack_ovf		/* then the kernel stack overflowed */
-5:
-#ifdef CONFIG_6xx
-	tophys(r9,r9)			/* check local flags */
-	lwz	r12,TI_LOCAL_FLAGS(r9)
-	mtcrf	0x01,r12
-	bt-	31-TLF_NAPPING,4f
-#endif /* CONFIG_6xx */
-	.globl transfer_to_handler_cont
-transfer_to_handler_cont:
-3:
-	mflr	r9
-	lwz	r11,0(r9)		/* virtual address of handler */
-	lwz	r9,4(r9)		/* where to go when done */
-	mtspr	SPRN_SRR0,r11
-	mtspr	SPRN_SRR1,r10
-	mtlr	r9
-	SYNC
-	RFI				/* jump to handler, enable MMU */
-
-#ifdef CONFIG_6xx
-4:	rlwinm	r12,r12,0,~_TLF_NAPPING
-	stw	r12,TI_LOCAL_FLAGS(r9)
-	b	power_save_6xx_restore
-#endif
-
-/*
- * On kernel stack overflow, load up an initial stack pointer
- * and call StackOverflow(regs), which should not return.
- */
-stack_ovf:
-	/* sometimes we use a statically-allocated stack, which is OK. */
-	lis	r12,_end@h
-	ori	r12,r12,_end@l
-	cmplw	r1,r12
-	ble	5b			/* r1 <= &_end is OK */
-	SAVE_NVGPRS(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	lis	r1,init_thread_union@ha
-	addi	r1,r1,init_thread_union@l
-	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
-	lis	r9,StackOverflow@ha
-	addi	r9,r9,StackOverflow@l
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
-	FIX_SRR1(r10,r12)
-	mtspr	SPRN_SRR0,r9
-	mtspr	SPRN_SRR1,r10
-	SYNC
-	RFI
-
-/*
- * Handle a system call.
- */
-	.stabs	"arch/ppc/kernel/",N_SO,0,0,0f
-	.stabs	"entry.S",N_SO,0,0,0f
-0:
-
-_GLOBAL(DoSyscall)
-	stw	r3,ORIG_GPR3(r1)
-	li	r12,0
-	stw	r12,RESULT(r1)
-	lwz	r11,_CCR(r1)	/* Clear SO bit in CR */
-	rlwinm	r11,r11,0,4,2
-	stw	r11,_CCR(r1)
-#ifdef SHOW_SYSCALLS
-	bl	do_show_syscall
-#endif /* SHOW_SYSCALLS */
-	rlwinm	r10,r1,0,0,18	/* current_thread_info() */
-	lwz	r11,TI_FLAGS(r10)
-	andi.	r11,r11,_TIF_SYSCALL_T_OR_A
-	bne-	syscall_dotrace
-syscall_dotrace_cont:
-	cmplwi	0,r0,NR_syscalls
-	lis	r10,sys_call_table@h
-	ori	r10,r10,sys_call_table@l
-	slwi	r0,r0,2
-	bge-	66f
-	lwzx	r10,r10,r0	/* Fetch system call handler [ptr] */
-	mtlr	r10
-	addi	r9,r1,STACK_FRAME_OVERHEAD
-	PPC440EP_ERR42
-	blrl			/* Call handler */
-	.globl	ret_from_syscall
-ret_from_syscall:
-#ifdef SHOW_SYSCALLS
-	bl	do_show_syscall_exit
-#endif
-	mr	r6,r3
-	rlwinm	r12,r1,0,0,18	/* current_thread_info() */
-	/* disable interrupts so current_thread_info()->flags can't change */
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL)	/* doesn't include MSR_EE */
-	SYNC
-	MTMSRD(r10)
-	lwz	r9,TI_FLAGS(r12)
-	li	r8,-_LAST_ERRNO
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
-	bne-	syscall_exit_work
-	cmplw	0,r3,r8
-	blt+	syscall_exit_cont
-	lwz	r11,_CCR(r1)			/* Load CR */
-	neg	r3,r3
-	oris	r11,r11,0x1000	/* Set SO bit in CR */
-	stw	r11,_CCR(r1)
-syscall_exit_cont:
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	/* If the process has its own DBCR0 value, load it up.  The single
-	   step bit tells us that dbcr0 should be loaded. */
-	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,DBCR0_IC@h
-	bnel-	load_dbcr0
-#endif
-#ifdef CONFIG_44x
-	lis	r4,icache_44x_need_flush@ha
-	lwz	r5,icache_44x_need_flush@l(r4)
-	cmplwi	cr0,r5,0
-	bne-	2f
-1:
-#endif /* CONFIG_44x */
-BEGIN_FTR_SECTION
-	lwarx	r7,0,r1
-END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
-	stwcx.	r0,0,r1			/* to clear the reservation */
-	lwz	r4,_LINK(r1)
-	lwz	r5,_CCR(r1)
-	mtlr	r4
-	mtcr	r5
-	lwz	r7,_NIP(r1)
-	lwz	r8,_MSR(r1)
-	FIX_SRR1(r8, r0)
-	lwz	r2,GPR2(r1)
-	lwz	r1,GPR1(r1)
-	mtspr	SPRN_SRR0,r7
-	mtspr	SPRN_SRR1,r8
-	SYNC
-	RFI
-#ifdef CONFIG_44x
-2:	li	r7,0
-	iccci	r0,r0
-	stw	r7,icache_44x_need_flush@l(r4)
-	b	1b
-#endif  /* CONFIG_44x */
-
-66:	li	r3,-ENOSYS
-	b	ret_from_syscall
-
-	.globl	ret_from_fork
-ret_from_fork:
-	REST_NVGPRS(r1)
-	bl	schedule_tail
-	li	r3,0
-	b	ret_from_syscall
-
-/* Traced system call support */
-syscall_dotrace:
-	SAVE_NVGPRS(r1)
-	li	r0,0xc00
-	stw	r0,TRAP(r1)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	do_syscall_trace_enter
-	lwz	r0,GPR0(r1)	/* Restore original registers */
-	lwz	r3,GPR3(r1)
-	lwz	r4,GPR4(r1)
-	lwz	r5,GPR5(r1)
-	lwz	r6,GPR6(r1)
-	lwz	r7,GPR7(r1)
-	lwz	r8,GPR8(r1)
-	REST_NVGPRS(r1)
-	b	syscall_dotrace_cont
-
-syscall_exit_work:
-	andi.	r0,r9,_TIF_RESTOREALL
-	beq+	0f
-	REST_NVGPRS(r1)
-	b	2f
-0:	cmplw	0,r3,r8
-	blt+	1f
-	andi.	r0,r9,_TIF_NOERROR
-	bne-	1f
-	lwz	r11,_CCR(r1)			/* Load CR */
-	neg	r3,r3
-	oris	r11,r11,0x1000	/* Set SO bit in CR */
-	stw	r11,_CCR(r1)
-
-1:	stw	r6,RESULT(r1)	/* Save result */
-	stw	r3,GPR3(r1)	/* Update return value */
-2:	andi.	r0,r9,(_TIF_PERSYSCALL_MASK)
-	beq	4f
-
-	/* Clear per-syscall TIF flags if any are set.  */
-
-	li	r11,_TIF_PERSYSCALL_MASK
-	addi	r12,r12,TI_FLAGS
-3:	lwarx	r8,0,r12
-	andc	r8,r8,r11
-#ifdef CONFIG_IBM405_ERR77
-	dcbt	0,r12
-#endif
-	stwcx.	r8,0,r12
-	bne-	3b
-	subi	r12,r12,TI_FLAGS
-	
-4:	/* Anything which requires enabling interrupts? */
-	andi.	r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
-	beq	ret_from_except
-
-	/* Re-enable interrupts */
-	ori	r10,r10,MSR_EE
-	SYNC
-	MTMSRD(r10)
-
-	/* Save NVGPRS if they're not saved already */
-	lwz	r4,TRAP(r1)
-	andi.	r4,r4,1
-	beq	5f
-	SAVE_NVGPRS(r1)
-	li	r4,0xc00
-	stw	r4,TRAP(r1)
-5:
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	do_syscall_trace_leave
-	b	ret_from_except_full
-
-#ifdef SHOW_SYSCALLS
-do_show_syscall:
-#ifdef SHOW_SYSCALLS_TASK
-	lis	r11,show_syscalls_task@ha
-	lwz	r11,show_syscalls_task@l(r11)
-	cmp	0,r2,r11
-	bnelr
-#endif
-	stw	r31,GPR31(r1)
-	mflr	r31
-	lis	r3,7f@ha
-	addi	r3,r3,7f@l
-	lwz	r4,GPR0(r1)
-	lwz	r5,GPR3(r1)
-	lwz	r6,GPR4(r1)
-	lwz	r7,GPR5(r1)
-	lwz	r8,GPR6(r1)
-	lwz	r9,GPR7(r1)
-	bl	printk
-	lis	r3,77f@ha
-	addi	r3,r3,77f@l
-	lwz	r4,GPR8(r1)
-	mr	r5,r2
-	bl	printk
-	lwz	r0,GPR0(r1)
-	lwz	r3,GPR3(r1)
-	lwz	r4,GPR4(r1)
-	lwz	r5,GPR5(r1)
-	lwz	r6,GPR6(r1)
-	lwz	r7,GPR7(r1)
-	lwz	r8,GPR8(r1)
-	mtlr	r31
-	lwz	r31,GPR31(r1)
-	blr
-
-do_show_syscall_exit:
-#ifdef SHOW_SYSCALLS_TASK
-	lis	r11,show_syscalls_task@ha
-	lwz	r11,show_syscalls_task@l(r11)
-	cmp	0,r2,r11
-	bnelr
-#endif
-	stw	r31,GPR31(r1)
-	mflr	r31
-	stw	r3,RESULT(r1)	/* Save result */
-	mr	r4,r3
-	lis	r3,79f@ha
-	addi	r3,r3,79f@l
-	bl	printk
-	lwz	r3,RESULT(r1)
-	mtlr	r31
-	lwz	r31,GPR31(r1)
-	blr
-
-7:	.string	"syscall %d(%x, %x, %x, %x, %x, "
-77:	.string	"%x), current=%p\n"
-79:	.string	" -> %x\n"
-	.align	2,0
-
-#ifdef SHOW_SYSCALLS_TASK
-	.data
-	.globl	show_syscalls_task
-show_syscalls_task:
-	.long	-1
-	.text
-#endif
-#endif /* SHOW_SYSCALLS */
-
-/*
- * The fork/clone functions need to copy the full register set into
- * the child process. Therefore we need to save all the nonvolatile
- * registers (r13 - r31) before calling the C code.
- */
-	.globl	ppc_fork
-ppc_fork:
-	SAVE_NVGPRS(r1)
-	lwz	r0,TRAP(r1)
-	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
-	stw	r0,TRAP(r1)		/* register set saved */
-	b	sys_fork
-
-	.globl	ppc_vfork
-ppc_vfork:
-	SAVE_NVGPRS(r1)
-	lwz	r0,TRAP(r1)
-	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
-	stw	r0,TRAP(r1)		/* register set saved */
-	b	sys_vfork
-
-	.globl	ppc_clone
-ppc_clone:
-	SAVE_NVGPRS(r1)
-	lwz	r0,TRAP(r1)
-	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
-	stw	r0,TRAP(r1)		/* register set saved */
-	b	sys_clone
-
-	.globl	ppc_swapcontext
-ppc_swapcontext:
-	SAVE_NVGPRS(r1)
-	lwz	r0,TRAP(r1)
-	rlwinm	r0,r0,0,0,30		/* clear LSB to indicate full */
-	stw	r0,TRAP(r1)		/* register set saved */
-	b	sys_swapcontext
-
-/*
- * Top-level page fault handling.
- * This is in assembler because if do_page_fault tells us that
- * it is a bad kernel page fault, we want to save the non-volatile
- * registers before calling bad_page_fault.
- */
-	.globl	handle_page_fault
-handle_page_fault:
-	stw	r4,_DAR(r1)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	do_page_fault
-	cmpwi	r3,0
-	beq+	ret_from_except
-	SAVE_NVGPRS(r1)
-	lwz	r0,TRAP(r1)
-	clrrwi	r0,r0,1
-	stw	r0,TRAP(r1)
-	mr	r5,r3
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	lwz	r4,_DAR(r1)
-	bl	bad_page_fault
-	b	ret_from_except_full
-
-/*
- * This routine switches between two different tasks.  The process
- * state of one is saved on its kernel stack.  Then the state
- * of the other is restored from its kernel stack.  The memory
- * management hardware is updated to the second process's state.
- * Finally, we can return to the second process.
- * On entry, r3 points to the THREAD for the current task, r4
- * points to the THREAD for the new task.
- *
- * This routine is always called with interrupts disabled.
- *
- * Note: there are two ways to get to the "going out" portion
- * of this code; either by coming in via the entry (_switch)
- * or via "fork" which must set up an environment equivalent
- * to the "_switch" path.  If you change this , you'll have to
- * change the fork code also.
- *
- * The code which creates the new task context is in 'copy_thread'
- * in arch/ppc/kernel/process.c
- */
-_GLOBAL(_switch)
-	stwu	r1,-INT_FRAME_SIZE(r1)
-	mflr	r0
-	stw	r0,INT_FRAME_SIZE+4(r1)
-	/* r3-r12 are caller saved -- Cort */
-	SAVE_NVGPRS(r1)
-	stw	r0,_NIP(r1)	/* Return to switch caller */
-	mfmsr	r11
-	li	r0,MSR_FP	/* Disable floating-point */
-#ifdef CONFIG_ALTIVEC
-BEGIN_FTR_SECTION
-	oris	r0,r0,MSR_VEC@h	/* Disable altivec */
-	mfspr	r12,SPRN_VRSAVE	/* save vrsave register value */
-	stw	r12,THREAD+THREAD_VRSAVE(r2)
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-#endif /* CONFIG_ALTIVEC */
-	and.	r0,r0,r11	/* FP or altivec enabled? */
-	beq+	1f
-	andc	r11,r11,r0
-	MTMSRD(r11)
-	isync
-1:	stw	r11,_MSR(r1)
-	mfcr	r10
-	stw	r10,_CCR(r1)
-	stw	r1,KSP(r3)	/* Set old stack pointer */
-
-#ifdef CONFIG_SMP
-	/* We need a sync somewhere here to make sure that if the
-	 * previous task gets rescheduled on another CPU, it sees all
-	 * stores it has performed on this one.
-	 */
-	sync
-#endif /* CONFIG_SMP */
-
-	tophys(r0,r4)
-	CLR_TOP32(r0)
-	mtspr	SPRN_SPRG3,r0	/* Update current THREAD phys addr */
-	lwz	r1,KSP(r4)	/* Load new stack pointer */
-
-	/* save the old current 'last' for return value */
-	mr	r3,r2
-	addi	r2,r4,-THREAD	/* Update current */
-
-#ifdef CONFIG_ALTIVEC
-BEGIN_FTR_SECTION
-	lwz	r0,THREAD+THREAD_VRSAVE(r2)
-	mtspr	SPRN_VRSAVE,r0		/* if G4, restore VRSAVE reg */
-END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
-#endif /* CONFIG_ALTIVEC */
-	lwz	r0,_CCR(r1)
-	mtcrf	0xFF,r0
-	/* r3-r12 are destroyed -- Cort */
-	REST_NVGPRS(r1)
-
-	lwz	r4,_NIP(r1)	/* Return to _switch caller in new task */
-	mtlr	r4
-	addi	r1,r1,INT_FRAME_SIZE
-	blr
-
-	.globl	fast_exception_return
-fast_exception_return:
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-	andi.	r10,r9,MSR_RI		/* check for recoverable interrupt */
-	beq	1f			/* if not, we've got problems */
-#endif
-
-2:	REST_4GPRS(3, r11)
-	lwz	r10,_CCR(r11)
-	REST_GPR(1, r11)
-	mtcr	r10
-	lwz	r10,_LINK(r11)
-	mtlr	r10
-	REST_GPR(10, r11)
-	mtspr	SPRN_SRR1,r9
-	mtspr	SPRN_SRR0,r12
-	REST_GPR(9, r11)
-	REST_GPR(12, r11)
-	lwz	r11,GPR11(r11)
-	SYNC
-	RFI
-
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-/* check if the exception happened in a restartable section */
-1:	lis	r3,exc_exit_restart_end@ha
-	addi	r3,r3,exc_exit_restart_end@l
-	cmplw	r12,r3
-	bge	3f
-	lis	r4,exc_exit_restart@ha
-	addi	r4,r4,exc_exit_restart@l
-	cmplw	r12,r4
-	blt	3f
-	lis	r3,fee_restarts@ha
-	tophys(r3,r3)
-	lwz	r5,fee_restarts@l(r3)
-	addi	r5,r5,1
-	stw	r5,fee_restarts@l(r3)
-	mr	r12,r4		/* restart at exc_exit_restart */
-	b	2b
-
-	.section .bss
-	.align	2
-fee_restarts:
-	.space	4
-	.previous
-
-/* aargh, a nonrecoverable interrupt, panic */
-/* aargh, we don't know which trap this is */
-/* but the 601 doesn't implement the RI bit, so assume it's OK */
-3:
-BEGIN_FTR_SECTION
-	b	2b
-END_FTR_SECTION_IFSET(CPU_FTR_601)
-	li	r10,-1
-	stw	r10,TRAP(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	lis	r10,MSR_KERNEL@h
-	ori	r10,r10,MSR_KERNEL@l
-	bl	transfer_to_handler_full
-	.long	nonrecoverable_exception
-	.long	ret_from_except
-#endif
-
-	.globl	ret_from_except_full
-ret_from_except_full:
-	REST_NVGPRS(r1)
-	/* fall through */
-
-	.globl	ret_from_except
-ret_from_except:
-	/* Hard-disable interrupts so that current_thread_info()->flags
-	 * can't change between when we test it and when we return
-	 * from the interrupt. */
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
-	SYNC			/* Some chip revs have problems here... */
-	MTMSRD(r10)		/* disable interrupts */
-
-	lwz	r3,_MSR(r1)	/* Returning to user mode? */
-	andi.	r0,r3,MSR_PR
-	beq	resume_kernel
-
-user_exc_return:		/* r10 contains MSR_KERNEL here */
-	/* Check current_thread_info()->flags */
-	rlwinm	r9,r1,0,0,18
-	lwz	r9,TI_FLAGS(r9)
-	andi.	r0,r9,(_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK|_TIF_NEED_RESCHED)
-	bne	do_work
-
-restore_user:
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	/* Check whether this process has its own DBCR0 value.  The single
-	   step bit tells us that dbcr0 should be loaded. */
-	lwz	r0,THREAD+THREAD_DBCR0(r2)
-	andis.	r10,r0,DBCR0_IC@h
-	bnel-	load_dbcr0
-#endif
-
-#ifdef CONFIG_PREEMPT
-	b	restore
-
-/* N.B. the only way to get here is from the beq following ret_from_except. */
-resume_kernel:
-	/* check current_thread_info->preempt_count */
-	rlwinm	r9,r1,0,0,18
-	lwz	r0,TI_PREEMPT(r9)
-	cmpwi	0,r0,0		/* if non-zero, just restore regs and return */
-	bne	restore
-	lwz	r0,TI_FLAGS(r9)
-	andi.	r0,r0,_TIF_NEED_RESCHED
-	beq+	restore
-	andi.	r0,r3,MSR_EE	/* interrupts off? */
-	beq	restore		/* don't schedule if so */
-1:	bl	preempt_schedule_irq
-	rlwinm	r9,r1,0,0,18
-	lwz	r3,TI_FLAGS(r9)
-	andi.	r0,r3,_TIF_NEED_RESCHED
-	bne-	1b
-#else
-resume_kernel:
-#endif /* CONFIG_PREEMPT */
-
-	/* interrupts are hard-disabled at this point */
-restore:
-#ifdef CONFIG_44x
-	lis	r4,icache_44x_need_flush@ha
-	lwz	r5,icache_44x_need_flush@l(r4)
-	cmplwi	cr0,r5,0
-	beq+	1f
-	li	r6,0
-	iccci	r0,r0
-	stw	r6,icache_44x_need_flush@l(r4)
-1:
-#endif  /* CONFIG_44x */
-	lwz	r0,GPR0(r1)
-	lwz	r2,GPR2(r1)
-	REST_4GPRS(3, r1)
-	REST_2GPRS(7, r1)
-
-	lwz	r10,_XER(r1)
-	lwz	r11,_CTR(r1)
-	mtspr	SPRN_XER,r10
-	mtctr	r11
-
-	PPC405_ERR77(0,r1)
-BEGIN_FTR_SECTION
-	lwarx	r11,0,r1
-END_FTR_SECTION_IFSET(CPU_FTR_NEED_PAIRED_STWCX)
-	stwcx.	r0,0,r1			/* to clear the reservation */
-
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-	lwz	r9,_MSR(r1)
-	andi.	r10,r9,MSR_RI		/* check if this exception occurred */
-	beql	nonrecoverable		/* at a bad place (MSR:RI = 0) */
-
-	lwz	r10,_CCR(r1)
-	lwz	r11,_LINK(r1)
-	mtcrf	0xFF,r10
-	mtlr	r11
-
-	/*
-	 * Once we put values in SRR0 and SRR1, we are in a state
-	 * where exceptions are not recoverable, since taking an
-	 * exception will trash SRR0 and SRR1.  Therefore we clear the
-	 * MSR:RI bit to indicate this.  If we do take an exception,
-	 * we can't return to the point of the exception but we
-	 * can restart the exception exit path at the label
-	 * exc_exit_restart below.  -- paulus
-	 */
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL & ~MSR_RI)
-	SYNC
-	MTMSRD(r10)		/* clear the RI bit */
-	.globl exc_exit_restart
-exc_exit_restart:
-	lwz	r9,_MSR(r1)
-	lwz	r12,_NIP(r1)
-	FIX_SRR1(r9,r10)
-	mtspr	SPRN_SRR0,r12
-	mtspr	SPRN_SRR1,r9
-	REST_4GPRS(9, r1)
-	lwz	r1,GPR1(r1)
-	.globl exc_exit_restart_end
-exc_exit_restart_end:
-	SYNC
-	RFI
-
-#else /* !(CONFIG_4xx || CONFIG_BOOKE) */
-	/*
-	 * This is a bit different on 4xx/Book-E because it doesn't have
-	 * the RI bit in the MSR.
-	 * The TLB miss handler checks if we have interrupted
-	 * the exception exit path and restarts it if so
-	 * (well maybe one day it will... :).
-	 */
-	lwz	r11,_LINK(r1)
-	mtlr	r11
-	lwz	r10,_CCR(r1)
-	mtcrf	0xff,r10
-	REST_2GPRS(9, r1)
-	.globl exc_exit_restart
-exc_exit_restart:
-	lwz	r11,_NIP(r1)
-	lwz	r12,_MSR(r1)
-exc_exit_start:
-	mtspr	SPRN_SRR0,r11
-	mtspr	SPRN_SRR1,r12
-	REST_2GPRS(11, r1)
-	lwz	r1,GPR1(r1)
-	.globl exc_exit_restart_end
-exc_exit_restart_end:
-	PPC405_ERR77_SYNC
-	rfi
-	b	.			/* prevent prefetch past rfi */
-
-/*
- * Returning from a critical interrupt in user mode doesn't need
- * to be any different from a normal exception.  For a critical
- * interrupt in the kernel, we just return (without checking for
- * preemption) since the interrupt may have happened at some crucial
- * place (e.g. inside the TLB miss handler), and because we will be
- * running with r1 pointing into critical_stack, not the current
- * process's kernel stack (and therefore current_thread_info() will
- * give the wrong answer).
- * We have to restore various SPRs that may have been in use at the
- * time of the critical interrupt.
- *
- */
-#ifdef CONFIG_40x
-#define PPC_40x_TURN_OFF_MSR_DR						    \
-	/* avoid any possible TLB misses here by turning off MSR.DR, we	    \
-	 * assume the instructions here are mapped by a pinned TLB entry */ \
-	li	r10,MSR_IR;						    \
-	mtmsr	r10;							    \
-	isync;								    \
-	tophys(r1, r1);
-#else
-#define PPC_40x_TURN_OFF_MSR_DR
-#endif
-
-#define RET_FROM_EXC_LEVEL(exc_lvl_srr0, exc_lvl_srr1, exc_lvl_rfi)	\
-	REST_NVGPRS(r1);						\
-	lwz	r3,_MSR(r1);						\
-	andi.	r3,r3,MSR_PR;						\
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL);				\
-	bne	user_exc_return;					\
-	lwz	r0,GPR0(r1);						\
-	lwz	r2,GPR2(r1);						\
-	REST_4GPRS(3, r1);						\
-	REST_2GPRS(7, r1);						\
-	lwz	r10,_XER(r1);						\
-	lwz	r11,_CTR(r1);						\
-	mtspr	SPRN_XER,r10;						\
-	mtctr	r11;							\
-	PPC405_ERR77(0,r1);						\
-	stwcx.	r0,0,r1;		/* to clear the reservation */	\
-	lwz	r11,_LINK(r1);						\
-	mtlr	r11;							\
-	lwz	r10,_CCR(r1);						\
-	mtcrf	0xff,r10;						\
-	PPC_40x_TURN_OFF_MSR_DR;					\
-	lwz	r9,_DEAR(r1);						\
-	lwz	r10,_ESR(r1);						\
-	mtspr	SPRN_DEAR,r9;						\
-	mtspr	SPRN_ESR,r10;						\
-	lwz	r11,_NIP(r1);						\
-	lwz	r12,_MSR(r1);						\
-	mtspr	exc_lvl_srr0,r11;					\
-	mtspr	exc_lvl_srr1,r12;					\
-	lwz	r9,GPR9(r1);						\
-	lwz	r12,GPR12(r1);						\
-	lwz	r10,GPR10(r1);						\
-	lwz	r11,GPR11(r1);						\
-	lwz	r1,GPR1(r1);						\
-	PPC405_ERR77_SYNC;						\
-	exc_lvl_rfi;							\
-	b	.;		/* prevent prefetch past exc_lvl_rfi */
-
-	.globl	ret_from_crit_exc
-ret_from_crit_exc:
-	RET_FROM_EXC_LEVEL(SPRN_CSRR0, SPRN_CSRR1, RFCI)
-
-#ifdef CONFIG_BOOKE
-	.globl	ret_from_debug_exc
-ret_from_debug_exc:
-	RET_FROM_EXC_LEVEL(SPRN_DSRR0, SPRN_DSRR1, RFDI)
-
-	.globl	ret_from_mcheck_exc
-ret_from_mcheck_exc:
-	RET_FROM_EXC_LEVEL(SPRN_MCSRR0, SPRN_MCSRR1, RFMCI)
-#endif /* CONFIG_BOOKE */
-
-/*
- * Load the DBCR0 value for a task that is being ptraced,
- * having first saved away the global DBCR0.  Note that r0
- * has the dbcr0 value to set upon entry to this.
- */
-load_dbcr0:
-	mfmsr	r10		/* first disable debug exceptions */
-	rlwinm	r10,r10,0,~MSR_DE
-	mtmsr	r10
-	isync
-	mfspr	r10,SPRN_DBCR0
-	lis	r11,global_dbcr0@ha
-	addi	r11,r11,global_dbcr0@l
-	stw	r10,0(r11)
-	mtspr	SPRN_DBCR0,r0
-	lwz	r10,4(r11)
-	addi	r10,r10,1
-	stw	r10,4(r11)
-	li	r11,-1
-	mtspr	SPRN_DBSR,r11	/* clear all pending debug events */
-	blr
-
-	.section .bss
-	.align	4
-global_dbcr0:
-	.space	8
-	.previous
-#endif /* !(CONFIG_4xx || CONFIG_BOOKE) */
-
-do_work:			/* r10 contains MSR_KERNEL here */
-	andi.	r0,r9,_TIF_NEED_RESCHED
-	beq	do_user_signal
-
-do_resched:			/* r10 contains MSR_KERNEL here */
-	ori	r10,r10,MSR_EE
-	SYNC
-	MTMSRD(r10)		/* hard-enable interrupts */
-	bl	schedule
-recheck:
-	LOAD_MSR_KERNEL(r10,MSR_KERNEL)
-	SYNC
-	MTMSRD(r10)		/* disable interrupts */
-	rlwinm	r9,r1,0,0,18
-	lwz	r9,TI_FLAGS(r9)
-	andi.	r0,r9,_TIF_NEED_RESCHED
-	bne-	do_resched
-	andi.	r0,r9,_TIF_SIGPENDING
-	beq	restore_user
-do_user_signal:			/* r10 contains MSR_KERNEL here */
-	ori	r10,r10,MSR_EE
-	SYNC
-	MTMSRD(r10)		/* hard-enable interrupts */
-	/* save r13-r31 in the exception frame, if not already done */
-	lwz	r3,TRAP(r1)
-	andi.	r0,r3,1
-	beq	2f
-	SAVE_NVGPRS(r1)
-	rlwinm	r3,r3,0,0,30
-	stw	r3,TRAP(r1)
-2:	li	r3,0
-	addi	r4,r1,STACK_FRAME_OVERHEAD
-	bl	do_signal
-	REST_NVGPRS(r1)
-	b	recheck
-
-/*
- * We come here when we are at the end of handling an exception
- * that occurred at a place where taking an exception will lose
- * state information, such as the contents of SRR0 and SRR1.
- */
-nonrecoverable:
-	lis	r10,exc_exit_restart_end@ha
-	addi	r10,r10,exc_exit_restart_end@l
-	cmplw	r12,r10
-	bge	3f
-	lis	r11,exc_exit_restart@ha
-	addi	r11,r11,exc_exit_restart@l
-	cmplw	r12,r11
-	blt	3f
-	lis	r10,ee_restarts@ha
-	lwz	r12,ee_restarts@l(r10)
-	addi	r12,r12,1
-	stw	r12,ee_restarts@l(r10)
-	mr	r12,r11		/* restart at exc_exit_restart */
-	blr
-3:	/* OK, we can't recover, kill this process */
-	/* but the 601 doesn't implement the RI bit, so assume it's OK */
-BEGIN_FTR_SECTION
-	blr
-END_FTR_SECTION_IFSET(CPU_FTR_601)
-	lwz	r3,TRAP(r1)
-	andi.	r0,r3,1
-	beq	4f
-	SAVE_NVGPRS(r1)
-	rlwinm	r3,r3,0,0,30
-	stw	r3,TRAP(r1)
-4:	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	nonrecoverable_exception
-	/* shouldn't return */
-	b	4b
-
-	.section .bss
-	.align	2
-ee_restarts:
-	.space	4
-	.previous
diff --git a/arch/ppc/kernel/head.S b/arch/ppc/kernel/head.S
deleted file mode 100644
index e7e642b95138..000000000000
--- a/arch/ppc/kernel/head.S
+++ /dev/null
@@ -1,1220 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
- *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
- *  Adapted for Power Macintosh by Paul Mackerras.
- *  Low-level exception handlers and MMU support
- *  rewritten by Paul Mackerras.
- *    Copyright (C) 1996 Paul Mackerras.
- *  MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  This file contains the low-level support and setup for the
- *  PowerPC platform, including trap and interrupt dispatch.
- *  (The PPC 8xx embedded CPUs use head_8xx.S instead.)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/cputable.h>
-#include <asm/cache.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-
-/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
-#define LOAD_BAT(n, reg, RA, RB)	\
-	/* see the comment for clear_bats() -- Cort */ \
-	li	RA,0;			\
-	mtspr	SPRN_IBAT##n##U,RA;	\
-	mtspr	SPRN_DBAT##n##U,RA;	\
-	lwz	RA,(n*16)+0(reg);	\
-	lwz	RB,(n*16)+4(reg);	\
-	mtspr	SPRN_IBAT##n##U,RA;	\
-	mtspr	SPRN_IBAT##n##L,RB;	\
-	beq	1f;			\
-	lwz	RA,(n*16)+8(reg);	\
-	lwz	RB,(n*16)+12(reg);	\
-	mtspr	SPRN_DBAT##n##U,RA;	\
-	mtspr	SPRN_DBAT##n##L,RB;	\
-1:
-
-	.text
-	.stabs	"arch/ppc/kernel/",N_SO,0,0,0f
-	.stabs	"head.S",N_SO,0,0,0f
-0:
-	.globl	_stext
-_stext:
-
-/*
- * _start is defined this way because the XCOFF loader in the OpenFirmware
- * on the powermac expects the entry point to be a procedure descriptor.
- */
-	.text
-	.globl	_start
-_start:
-	/*
-	 * These are here for legacy reasons, the kernel used to
-	 * need to look like a coff function entry for the pmac
-	 * but we're always started by some kind of bootloader now.
-	 *  -- Cort
-	 */
-	nop	/* used by __secondary_hold on prep (mtx) and chrp smp */
-	nop	/* used by __secondary_hold on prep (mtx) and chrp smp */
-	nop
-
-/* PMAC
- * Enter here with the kernel text, data and bss loaded starting at
- * 0, running with virtual == physical mapping.
- * r5 points to the prom entry point (the client interface handler
- * address).  Address translation is turned on, with the prom
- * managing the hash table.  Interrupts are disabled.  The stack
- * pointer (r1) points to just below the end of the half-meg region
- * from 0x380000 - 0x400000, which is mapped in already.
- *
- * If we are booted from MacOS via BootX, we enter with the kernel
- * image loaded somewhere, and the following values in registers:
- *  r3: 'BooX' (0x426f6f58)
- *  r4: virtual address of boot_infos_t
- *  r5: 0
- *
- * APUS
- *   r3: 'APUS'
- *   r4: physical address of memory base
- *   Linux/m68k style BootInfo structure at &_end.
- *
- * PREP
- * This is jumped to on prep systems right after the kernel is relocated
- * to its proper place in memory by the boot loader.  The expected layout
- * of the regs is:
- *   r3: ptr to residual data
- *   r4: initrd_start or if no initrd then 0
- *   r5: initrd_end - unused if r4 is 0
- *   r6: Start of command line string
- *   r7: End of command line string
- *
- * This just gets a minimal mmu environment setup so we can call
- * start_here() to do the real work.
- * -- Cort
- */
-
-	.globl	__start
-__start:
-	mr	r31,r3			/* save parameters */
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
-	li	r24,0			/* cpu # */
-
-/*
- * early_init() does the early machine identification and does
- * the necessary low-level setup and clears the BSS
- *  -- Cort <cort@fsmlabs.com>
- */
-	bl	early_init
-
-/* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains
- * the physical address we are running at, returned by early_init()
- */
- 	bl	mmu_off
-__after_mmu_off:
-	bl	clear_bats
-	bl	flush_tlbs
-
-	bl	initial_bats
-#ifdef CONFIG_BOOTX_TEXT
-	bl	setup_disp_bat
-#endif
-
-/*
- * Call setup_cpu for CPU 0 and initialize 6xx Idle
- */
-	bl	reloc_offset
-	li	r24,0			/* cpu# */
-	bl	call_setup_cpu		/* Call setup_cpu for this CPU */
-#ifdef CONFIG_6xx
-	bl	reloc_offset
-	bl	init_idle_6xx
-#endif /* CONFIG_6xx */
-
-
-/*
- * We need to run with _start at physical address 0.
- * If the MMU is already turned on, we copy stuff to KERNELBASE,
- * otherwise we copy it to 0.
- */
-	bl	reloc_offset
-	mr	r26,r3
-	addis	r4,r3,KERNELBASE@h	/* current address of _start */
-	cmpwi	0,r4,0			/* are we already running at 0? */
-	bne	relocate_kernel
-
-/*
- * we now have the 1st 16M of ram mapped with the bats.
- * prep needs the mmu to be turned on here, but pmac already has it on.
- * this shouldn't bother the pmac since it just gets turned on again
- * as we jump to our code at KERNELBASE. -- Cort
- * Actually no, pmac doesn't have it on any more. BootX enters with MMU
- * off, and in other cases, we now turn it off before changing BATs above.
- */
-turn_on_mmu:
-	mfmsr	r0
-	ori	r0,r0,MSR_DR|MSR_IR
-	mtspr	SPRN_SRR1,r0
-	lis	r0,start_here@h
-	ori	r0,r0,start_here@l
-	mtspr	SPRN_SRR0,r0
-	SYNC
-	RFI				/* enables MMU */
-
-/*
- * We need __secondary_hold as a place to hold the other cpus on
- * an SMP machine, even when we are running a UP kernel.
- */
-	. = 0xc0			/* for prep bootloader */
-	li	r3,1			/* MTX only has 1 cpu */
-	.globl	__secondary_hold
-__secondary_hold:
-	/* tell the master we're here */
-	stw	r3,4(0)
-#ifdef CONFIG_SMP
-100:	lwz	r4,0(0)
-	/* wait until we're told to start */
-	cmpw	0,r4,r3
-	bne	100b
-	/* our cpu # was at addr 0 - go */
-	mr	r24,r3			/* cpu # */
-	b	__secondary_start
-#else
-	b	.
-#endif /* CONFIG_SMP */
-
-/*
- * Exception entry code.  This code runs with address translation
- * turned off, i.e. using physical addresses.
- * We assume sprg3 has the physical address of the current
- * task's thread_struct.
- */
-#define EXCEPTION_PROLOG	\
-	mtspr	SPRN_SPRG0,r10;	\
-	mtspr	SPRN_SPRG1,r11;	\
-	mfcr	r10;		\
-	EXCEPTION_PROLOG_1;	\
-	EXCEPTION_PROLOG_2
-
-#define EXCEPTION_PROLOG_1	\
-	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel */ \
-	andi.	r11,r11,MSR_PR;	\
-	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
-	beq	1f;		\
-	mfspr	r11,SPRN_SPRG3;	\
-	lwz	r11,THREAD_INFO-THREAD(r11);	\
-	addi	r11,r11,THREAD_SIZE;	\
-	tophys(r11,r11);	\
-1:	subi	r11,r11,INT_FRAME_SIZE	/* alloc exc. frame */
-
-
-#define EXCEPTION_PROLOG_2	\
-	CLR_TOP32(r11);		\
-	stw	r10,_CCR(r11);		/* save registers */ \
-	stw	r12,GPR12(r11);	\
-	stw	r9,GPR9(r11);	\
-	mfspr	r10,SPRN_SPRG0;	\
-	stw	r10,GPR10(r11);	\
-	mfspr	r12,SPRN_SPRG1;	\
-	stw	r12,GPR11(r11);	\
-	mflr	r10;		\
-	stw	r10,_LINK(r11);	\
-	mfspr	r12,SPRN_SRR0;	\
-	mfspr	r9,SPRN_SRR1;	\
-	stw	r1,GPR1(r11);	\
-	stw	r1,0(r11);	\
-	tovirt(r1,r11);			/* set new kernel sp */	\
-	li	r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
-	MTMSRD(r10);			/* (except for mach check in rtas) */ \
-	stw	r0,GPR0(r11);	\
-	SAVE_4GPRS(3, r11);	\
-	SAVE_2GPRS(7, r11)
-
-/*
- * Note: code which follows this uses cr0.eq (set if from kernel),
- * r11, r12 (SRR0), and r9 (SRR1).
- *
- * Note2: once we have set r1 we are in a position to take exceptions
- * again, and we could thus set MSR:RI at that point.
- */
-
-/*
- * Exception vectors.
- */
-#define EXCEPTION(n, label, hdlr, xfer)		\
-	. = n;					\
-label:						\
-	EXCEPTION_PROLOG;			\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;	\
-	xfer(n, hdlr)
-
-#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret)	\
-	li	r10,trap;					\
-	stw	r10,TRAP(r11);					\
-	li	r10,MSR_KERNEL;					\
-	copyee(r10, r9);					\
-	bl	tfer;						\
-i##n:								\
-	.long	hdlr;						\
-	.long	ret
-
-#define COPY_EE(d, s)		rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full,	\
-			  ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
-			  ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr)	\
-	EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
-			  ret_from_except)
-
-/* System reset */
-/* core99 pmac starts the seconary here by changing the vector, and
-   putting it back to what it was (unknown_exception) when done.  */
-	EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
-
-/* Machine check */
-	. = 0x200
-	mtspr	SPRN_SPRG0,r10
-	mtspr	SPRN_SPRG1,r11
-	mfcr	r10
-	EXCEPTION_PROLOG_1
-7:	EXCEPTION_PROLOG_2
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_STD(0x200, machine_check_exception)
-
-/* Data access exception. */
-	. = 0x300
-DataAccess:
-	EXCEPTION_PROLOG
-	mfspr	r10,SPRN_DSISR
-	andis.	r0,r10,0xa470		/* weird error? */
-	bne	1f			/* if not, try to put a PTE */
-	mfspr	r4,SPRN_DAR		/* into the hash table */
-	rlwinm	r3,r10,32-15,21,21	/* DSISR_STORE -> _PAGE_RW */
-	bl	hash_page
-1:	stw	r10,_DSISR(r11)
-	mr	r5,r10
-	mfspr	r4,SPRN_DAR
-	EXC_XFER_EE_LITE(0x300, handle_page_fault)
-
-/* Instruction access exception. */
-	. = 0x400
-InstructionAccess:
-	EXCEPTION_PROLOG
-	andis.	r0,r9,0x4000		/* no pte found? */
-	beq	1f			/* if so, try to put a PTE */
-	li	r3,0			/* into the hash table */
-	mr	r4,r12			/* SRR0 is fault address */
-	bl	hash_page
-1:	mr	r4,r12
-	mr	r5,r9
-	EXC_XFER_EE_LITE(0x400, handle_page_fault)
-
-/* External interrupt */
-	EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
-
-/* Alignment exception */
-	. = 0x600
-Alignment:
-	EXCEPTION_PROLOG
-	mfspr	r4,SPRN_DAR
-	stw	r4,_DAR(r11)
-	mfspr	r5,SPRN_DSISR
-	stw	r5,_DSISR(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0x600, alignment_exception)
-
-/* Program check exception */
-	EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
-
-/* Floating-point unavailable */
-	. = 0x800
-FPUnavailable:
-	EXCEPTION_PROLOG
-	bne	load_up_fpu		/* if from user, just load it up */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
-
-/* Decrementer */
-	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
-
-	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
-
-/* System call */
-	. = 0xc00
-SystemCall:
-	EXCEPTION_PROLOG
-	EXC_XFER_EE_LITE(0xc00, DoSyscall)
-
-/* Single step - not used on 601 */
-	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
-	EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
-
-/*
- * The Altivec unavailable trap is at 0x0f20.  Foo.
- * We effectively remap it to 0x3000.
- * We include an altivec unavailable exception vector even if
- * not configured for Altivec, so that you can't panic a
- * non-altivec kernel running on a machine with altivec just
- * by executing an altivec instruction.
- */
-	. = 0xf00
-	b	Trap_0f
-
-	. = 0xf20
-	b	AltiVecUnavailable
-
-Trap_0f:
-	EXCEPTION_PROLOG
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0xf00, unknown_exception)
-
-/*
- * Handle TLB miss for instruction on 603/603e.
- * Note: we get an alternate set of r0 - r3 to use automatically.
- */
-	. = 0x1000
-InstructionTLBMiss:
-/*
- * r0:	stored ctr
- * r1:	linux style pte ( later becomes ppc hardware pte )
- * r2:	ptr to linux-style pte
- * r3:	scratch
- */
-	mfctr	r0
-	/* Get PTE (linux-style) and check access */
-	mfspr	r3,SPRN_IMISS
-	lis	r1,KERNELBASE@h		/* check if kernel address */
-	cmplw	0,r3,r1
-	mfspr	r2,SPRN_SPRG3
-	li	r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
-	lwz	r2,PGDIR(r2)
-	blt+	112f
-	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */
-	addi	r2,r2,swapper_pg_dir@l	/* kernel page table */
-	mfspr	r1,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
-	rlwinm	r1,r1,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
-112:	tophys(r2,r2)
-	rlwimi	r2,r3,12,20,29		/* insert top 10 bits of address */
-	lwz	r2,0(r2)		/* get pmd entry */
-	rlwinm.	r2,r2,0,0,19		/* extract address of pte page */
-	beq-	InstructionAddressInvalid	/* return if no mapping */
-	rlwimi	r2,r3,22,20,29		/* insert next 10 bits of address */
-	lwz	r3,0(r2)		/* get linux-style pte */
-	andc.	r1,r1,r3		/* check access & ~permission */
-	bne-	InstructionAddressInvalid /* return if access not permitted */
-	ori	r3,r3,_PAGE_ACCESSED	/* set _PAGE_ACCESSED in pte */
-	/*
-	 * NOTE! We are assuming this is not an SMP system, otherwise
-	 * we would need to update the pte atomically with lwarx/stwcx.
-	 */
-	stw	r3,0(r2)		/* update PTE (accessed bit) */
-	/* Convert linux-style PTE to low word of PPC-style PTE */
-	rlwinm	r1,r3,32-10,31,31	/* _PAGE_RW -> PP lsb */
-	rlwinm	r2,r3,32-7,31,31	/* _PAGE_DIRTY -> PP lsb */
-	and	r1,r1,r2		/* writable if _RW and _DIRTY */
-	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
-	rlwimi	r3,r3,32-1,31,31	/* _PAGE_USER -> PP lsb */
-	ori	r1,r1,0xe14		/* clear out reserved bits and M */
-	andc	r1,r3,r1		/* PP = user? (rw&dirty? 2: 3): 0 */
-	mtspr	SPRN_RPA,r1
-	mfspr	r3,SPRN_IMISS
-	tlbli	r3
-	mfspr	r3,SPRN_SRR1		/* Need to restore CR0 */
-	mtcrf	0x80,r3
-	rfi
-InstructionAddressInvalid:
-	mfspr	r3,SPRN_SRR1
-	rlwinm	r1,r3,9,6,6	/* Get load/store bit */
-
-	addis	r1,r1,0x2000
-	mtspr	SPRN_DSISR,r1	/* (shouldn't be needed) */
-	mtctr	r0		/* Restore CTR */
-	andi.	r2,r3,0xFFFF	/* Clear upper bits of SRR1 */
-	or	r2,r2,r1
-	mtspr	SPRN_SRR1,r2
-	mfspr	r1,SPRN_IMISS	/* Get failing address */
-	rlwinm.	r2,r2,0,31,31	/* Check for little endian access */
-	rlwimi	r2,r2,1,30,30	/* change 1 -> 3 */
-	xor	r1,r1,r2
-	mtspr	SPRN_DAR,r1	/* Set fault address */
-	mfmsr	r0		/* Restore "normal" registers */
-	xoris	r0,r0,MSR_TGPR>>16
-	mtcrf	0x80,r3		/* Restore CR0 */
-	mtmsr	r0
-	b	InstructionAccess
-
-/*
- * Handle TLB miss for DATA Load operation on 603/603e
- */
-	. = 0x1100
-DataLoadTLBMiss:
-/*
- * r0:	stored ctr
- * r1:	linux style pte ( later becomes ppc hardware pte )
- * r2:	ptr to linux-style pte
- * r3:	scratch
- */
-	mfctr	r0
-	/* Get PTE (linux-style) and check access */
-	mfspr	r3,SPRN_DMISS
-	lis	r1,KERNELBASE@h		/* check if kernel address */
-	cmplw	0,r3,r1
-	mfspr	r2,SPRN_SPRG3
-	li	r1,_PAGE_USER|_PAGE_PRESENT /* low addresses tested as user */
-	lwz	r2,PGDIR(r2)
-	blt+	112f
-	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */
-	addi	r2,r2,swapper_pg_dir@l	/* kernel page table */
-	mfspr	r1,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
-	rlwinm	r1,r1,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
-112:	tophys(r2,r2)
-	rlwimi	r2,r3,12,20,29		/* insert top 10 bits of address */
-	lwz	r2,0(r2)		/* get pmd entry */
-	rlwinm.	r2,r2,0,0,19		/* extract address of pte page */
-	beq-	DataAddressInvalid	/* return if no mapping */
-	rlwimi	r2,r3,22,20,29		/* insert next 10 bits of address */
-	lwz	r3,0(r2)		/* get linux-style pte */
-	andc.	r1,r1,r3		/* check access & ~permission */
-	bne-	DataAddressInvalid	/* return if access not permitted */
-	ori	r3,r3,_PAGE_ACCESSED	/* set _PAGE_ACCESSED in pte */
-	/*
-	 * NOTE! We are assuming this is not an SMP system, otherwise
-	 * we would need to update the pte atomically with lwarx/stwcx.
-	 */
-	stw	r3,0(r2)		/* update PTE (accessed bit) */
-	/* Convert linux-style PTE to low word of PPC-style PTE */
-	rlwinm	r1,r3,32-10,31,31	/* _PAGE_RW -> PP lsb */
-	rlwinm	r2,r3,32-7,31,31	/* _PAGE_DIRTY -> PP lsb */
-	and	r1,r1,r2		/* writable if _RW and _DIRTY */
-	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
-	rlwimi	r3,r3,32-1,31,31	/* _PAGE_USER -> PP lsb */
-	ori	r1,r1,0xe14		/* clear out reserved bits and M */
-	andc	r1,r3,r1		/* PP = user? (rw&dirty? 2: 3): 0 */
-	mtspr	SPRN_RPA,r1
-	mfspr	r3,SPRN_DMISS
-	tlbld	r3
-	mfspr	r3,SPRN_SRR1		/* Need to restore CR0 */
-	mtcrf	0x80,r3
-	rfi
-DataAddressInvalid:
-	mfspr	r3,SPRN_SRR1
-	rlwinm	r1,r3,9,6,6	/* Get load/store bit */
-	addis	r1,r1,0x2000
-	mtspr	SPRN_DSISR,r1
-	mtctr	r0		/* Restore CTR */
-	andi.	r2,r3,0xFFFF	/* Clear upper bits of SRR1 */
-	mtspr	SPRN_SRR1,r2
-	mfspr	r1,SPRN_DMISS	/* Get failing address */
-	rlwinm.	r2,r2,0,31,31	/* Check for little endian access */
-	beq	20f		/* Jump if big endian */
-	xori	r1,r1,3
-20:	mtspr	SPRN_DAR,r1	/* Set fault address */
-	mfmsr	r0		/* Restore "normal" registers */
-	xoris	r0,r0,MSR_TGPR>>16
-	mtcrf	0x80,r3		/* Restore CR0 */
-	mtmsr	r0
-	b	DataAccess
-
-/*
- * Handle TLB miss for DATA Store on 603/603e
- */
-	. = 0x1200
-DataStoreTLBMiss:
-/*
- * r0:	stored ctr
- * r1:	linux style pte ( later becomes ppc hardware pte )
- * r2:	ptr to linux-style pte
- * r3:	scratch
- */
-	mfctr	r0
-	/* Get PTE (linux-style) and check access */
-	mfspr	r3,SPRN_DMISS
-	lis	r1,KERNELBASE@h		/* check if kernel address */
-	cmplw	0,r3,r1
-	mfspr	r2,SPRN_SPRG3
-	li	r1,_PAGE_RW|_PAGE_USER|_PAGE_PRESENT /* access flags */
-	lwz	r2,PGDIR(r2)
-	blt+	112f
-	lis	r2,swapper_pg_dir@ha	/* if kernel address, use */
-	addi	r2,r2,swapper_pg_dir@l	/* kernel page table */
-	mfspr	r1,SPRN_SRR1		/* and MSR_PR bit from SRR1 */
-	rlwinm	r1,r1,32-12,29,29	/* shift MSR_PR to _PAGE_USER posn */
-112:	tophys(r2,r2)
-	rlwimi	r2,r3,12,20,29		/* insert top 10 bits of address */
-	lwz	r2,0(r2)		/* get pmd entry */
-	rlwinm.	r2,r2,0,0,19		/* extract address of pte page */
-	beq-	DataAddressInvalid	/* return if no mapping */
-	rlwimi	r2,r3,22,20,29		/* insert next 10 bits of address */
-	lwz	r3,0(r2)		/* get linux-style pte */
-	andc.	r1,r1,r3		/* check access & ~permission */
-	bne-	DataAddressInvalid	/* return if access not permitted */
-	ori	r3,r3,_PAGE_ACCESSED|_PAGE_DIRTY
-	/*
-	 * NOTE! We are assuming this is not an SMP system, otherwise
-	 * we would need to update the pte atomically with lwarx/stwcx.
-	 */
-	stw	r3,0(r2)		/* update PTE (accessed/dirty bits) */
-	/* Convert linux-style PTE to low word of PPC-style PTE */
-	rlwimi	r3,r3,32-1,30,30	/* _PAGE_USER -> PP msb */
-	li	r1,0xe15		/* clear out reserved bits and M */
-	andc	r1,r3,r1		/* PP = user? 2: 0 */
-	mtspr	SPRN_RPA,r1
-	mfspr	r3,SPRN_DMISS
-	tlbld	r3
-	mfspr	r3,SPRN_SRR1		/* Need to restore CR0 */
-	mtcrf	0x80,r3
-	rfi
-
-#ifndef CONFIG_ALTIVEC
-#define altivec_assist_exception	unknown_exception
-#endif
-
-	EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception, EXC_XFER_EE)
-	EXCEPTION(0x1400, SMI, SMIException, EXC_XFER_EE)
-	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1600, Trap_16, altivec_assist_exception, EXC_XFER_EE)
-	EXCEPTION(0x1700, Trap_17, TAUException, EXC_XFER_STD)
-	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2000, RunMode, RunModeException, EXC_XFER_EE)
-	EXCEPTION(0x2100, Trap_21, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2200, Trap_22, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2300, Trap_23, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2400, Trap_24, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2500, Trap_25, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2600, Trap_26, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2700, Trap_27, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2800, Trap_28, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2900, Trap_29, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2a00, Trap_2a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2b00, Trap_2b, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2c00, Trap_2c, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2d00, Trap_2d, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2e00, Trap_2e, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x2f00, MOLTrampoline, unknown_exception, EXC_XFER_EE_LITE)
-
-	.globl mol_trampoline
-	.set mol_trampoline, i0x2f00
-
-	. = 0x3000
-
-AltiVecUnavailable:
-	EXCEPTION_PROLOG
-#ifdef CONFIG_ALTIVEC
-	bne	load_up_altivec		/* if from user, just load it up */
-#endif /* CONFIG_ALTIVEC */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE_LITE(0xf20, altivec_unavailable_exception)
-
-#ifdef CONFIG_ALTIVEC
-/* Note that the AltiVec support is closely modeled after the FP
- * support.  Changes to one are likely to be applicable to the
- * other!  */
-load_up_altivec:
-/*
- * Disable AltiVec for the task which had AltiVec previously,
- * and save its AltiVec registers in its thread_struct.
- * Enables AltiVec for use in the kernel on return.
- * On SMP we know the AltiVec units are free, since we give it up every
- * switch.  -- Kumar
- */
-	mfmsr	r5
-	oris	r5,r5,MSR_VEC@h
-	MTMSRD(r5)			/* enable use of AltiVec now */
-	isync
-/*
- * For SMP, we don't do lazy AltiVec switching because it just gets too
- * horrendously complex, especially when a task switches from one CPU
- * to another.  Instead we call giveup_altivec in switch_to.
- */
-#ifndef CONFIG_SMP
-	tophys(r6,0)
-	addis	r3,r6,last_task_used_altivec@ha
-	lwz	r4,last_task_used_altivec@l(r3)
-	cmpwi	0,r4,0
-	beq	1f
-	add	r4,r4,r6
-	addi	r4,r4,THREAD	/* want THREAD of last_task_used_altivec */
-	SAVE_32VRS(0,r10,r4)
-	mfvscr	vr0
-	li	r10,THREAD_VSCR
-	stvx	vr0,r10,r4
-	lwz	r5,PT_REGS(r4)
-	add	r5,r5,r6
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r10,MSR_VEC@h
-	andc	r4,r4,r10	/* disable altivec for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#endif /* CONFIG_SMP */
-	/* enable use of AltiVec after return */
-	oris	r9,r9,MSR_VEC@h
-	mfspr	r5,SPRN_SPRG3		/* current task's THREAD (phys) */
-	li	r4,1
-	li	r10,THREAD_VSCR
-	stw	r4,THREAD_USED_VR(r5)
-	lvx	vr0,r10,r5
-	mtvscr	vr0
-	REST_32VRS(0,r10,r5)
-#ifndef CONFIG_SMP
-	subi	r4,r5,THREAD
-	sub	r4,r4,r6
-	stw	r4,last_task_used_altivec@l(r3)
-#endif /* CONFIG_SMP */
-	/* restore registers and return */
-	/* we haven't used ctr or xer or lr */
-	b	fast_exception_return
-
-/*
- * giveup_altivec(tsk)
- * Disable AltiVec for the task given as the argument,
- * and save the AltiVec registers in its thread_struct.
- * Enables AltiVec for use in the kernel on return.
- */
-
-	.globl	giveup_altivec
-giveup_altivec:
-	mfmsr	r5
-	oris	r5,r5,MSR_VEC@h
-	SYNC
-	MTMSRD(r5)			/* enable use of AltiVec now */
-	isync
-	cmpwi	0,r3,0
-	beqlr-				/* if no previous owner, done */
-	addi	r3,r3,THREAD		/* want THREAD of task */
-	lwz	r5,PT_REGS(r3)
-	cmpwi	0,r5,0
-	SAVE_32VRS(0, r4, r3)
-	mfvscr	vr0
-	li	r4,THREAD_VSCR
-	stvx	vr0,r4,r3
-	beq	1f
-	lwz	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-	lis	r3,MSR_VEC@h
-	andc	r4,r4,r3		/* disable AltiVec for previous task */
-	stw	r4,_MSR-STACK_FRAME_OVERHEAD(r5)
-1:
-#ifndef CONFIG_SMP
-	li	r5,0
-	lis	r4,last_task_used_altivec@ha
-	stw	r5,last_task_used_altivec@l(r4)
-#endif /* CONFIG_SMP */
-	blr
-#endif /* CONFIG_ALTIVEC */
-
-/*
- * This code is jumped to from the startup code to copy
- * the kernel image to physical address 0.
- */
-relocate_kernel:
-	addis	r9,r26,klimit@ha	/* fetch klimit */
-	lwz	r25,klimit@l(r9)
-	addis	r25,r25,-KERNELBASE@h
-	li	r3,0			/* Destination base address */
-	li	r6,0			/* Destination offset */
-	li	r5,0x4000		/* # bytes of memory to copy */
-	bl	copy_and_flush		/* copy the first 0x4000 bytes */
-	addi	r0,r3,4f@l		/* jump to the address of 4f */
-	mtctr	r0			/* in copy and do the rest. */
-	bctr				/* jump to the copy */
-4:	mr	r5,r25
-	bl	copy_and_flush		/* copy the rest */
-	b	turn_on_mmu
-
-/*
- * Copy routine used to copy the kernel to start at physical address 0
- * and flush and invalidate the caches as needed.
- * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset
- * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5.
- */
-copy_and_flush:
-	addi	r5,r5,-4
-	addi	r6,r6,-4
-4:	li	r0,L1_CACHE_BYTES/4
-	mtctr	r0
-3:	addi	r6,r6,4			/* copy a cache line */
-	lwzx	r0,r6,r4
-	stwx	r0,r6,r3
-	bdnz	3b
-	dcbst	r6,r3			/* write it to memory */
-	sync
-	icbi	r6,r3			/* flush the icache line */
-	cmplw	0,r6,r5
-	blt	4b
-	sync				/* additional sync needed on g4 */
-	isync
-	addi	r5,r5,4
-	addi	r6,r6,4
-	blr
-
-#ifdef CONFIG_SMP
-	.globl	__secondary_start_pmac_0
-__secondary_start_pmac_0:
-	/* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */
-	li	r24,0
-	b	1f
-	li	r24,1
-	b	1f
-	li	r24,2
-	b	1f
-	li	r24,3
-1:
-	/* on powersurge, we come in here with IR=0 and DR=1, and DBAT 0
-	   set to map the 0xf0000000 - 0xffffffff region */
-	mfmsr	r0
-	rlwinm	r0,r0,0,28,26		/* clear DR (0x10) */
-	SYNC
-	mtmsr	r0
-	isync
-
-	.globl	__secondary_start
-__secondary_start:
-	/* Copy some CPU settings from CPU 0 */
-	bl	__restore_cpu_setup
-
-	lis	r3,-KERNELBASE@h
-	mr	r4,r24
-	bl	call_setup_cpu		/* Call setup_cpu for this CPU */
-#ifdef CONFIG_6xx
-	lis	r3,-KERNELBASE@h
-	bl	init_idle_6xx
-#endif /* CONFIG_6xx */
-
-	/* get current_thread_info and current */
-	lis	r1,secondary_ti@ha
-	tophys(r1,r1)
-	lwz	r1,secondary_ti@l(r1)
-	tophys(r2,r1)
-	lwz	r2,TI_TASK(r2)
-
-	/* stack */
-	addi	r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
-	li	r0,0
-	tophys(r3,r1)
-	stw	r0,0(r3)
-
-	/* load up the MMU */
-	bl	load_up_mmu
-
-	/* ptr to phys current thread */
-	tophys(r4,r2)
-	addi	r4,r4,THREAD	/* phys address of our thread_struct */
-	CLR_TOP32(r4)
-	mtspr	SPRN_SPRG3,r4
-	li	r3,0
-	mtspr	SPRN_SPRG2,r3	/* 0 => not in RTAS */
-
-	/* enable MMU and jump to start_secondary */
-	li	r4,MSR_KERNEL
-	FIX_SRR1(r4,r5)
-	lis	r3,start_secondary@h
-	ori	r3,r3,start_secondary@l
-	mtspr	SPRN_SRR0,r3
-	mtspr	SPRN_SRR1,r4
-	SYNC
-	RFI
-#endif /* CONFIG_SMP */
-
-/*
- * Those generic dummy functions are kept for CPUs not
- * included in CONFIG_6xx
- */
-#if !defined(CONFIG_6xx)
-_GLOBAL(__save_cpu_setup)
-	blr
-_GLOBAL(__restore_cpu_setup)
-	blr
-#endif /* !defined(CONFIG_6xx) */
-
-
-/*
- * Load stuff into the MMU.  Intended to be called with
- * IR=0 and DR=0.
- */
-load_up_mmu:
-	sync			/* Force all PTE updates to finish */
-	isync
-	tlbia			/* Clear all TLB entries */
-	sync			/* wait for tlbia/tlbie to finish */
-	TLBSYNC			/* ... on all CPUs */
-	/* Load the SDR1 register (hash table base & size) */
-	lis	r6,_SDR1@ha
-	tophys(r6,r6)
-	lwz	r6,_SDR1@l(r6)
-	mtspr	SPRN_SDR1,r6
-	li	r0,16		/* load up segment register values */
-	mtctr	r0		/* for context 0 */
-	lis	r3,0x2000	/* Ku = 1, VSID = 0 */
-	li	r4,0
-3:	mtsrin	r3,r4
-	addi	r3,r3,0x111	/* increment VSID */
-	addis	r4,r4,0x1000	/* address of next segment */
-	bdnz	3b
-
-/* Load the BAT registers with the values set up by MMU_init.
-   MMU_init takes care of whether we're on a 601 or not. */
-	mfpvr	r3
-	srwi	r3,r3,16
-	cmpwi	r3,1
-	lis	r3,BATS@ha
-	addi	r3,r3,BATS@l
-	tophys(r3,r3)
-	LOAD_BAT(0,r3,r4,r5)
-	LOAD_BAT(1,r3,r4,r5)
-	LOAD_BAT(2,r3,r4,r5)
-	LOAD_BAT(3,r3,r4,r5)
-
-	blr
-
-/*
- * This is where the main kernel code starts.
- */
-start_here:
-	/* ptr to current */
-	lis	r2,init_task@h
-	ori	r2,r2,init_task@l
-	/* Set up for using our exception vectors */
-	/* ptr to phys current thread */
-	tophys(r4,r2)
-	addi	r4,r4,THREAD	/* init task's THREAD */
-	CLR_TOP32(r4)
-	mtspr	SPRN_SPRG3,r4
-	li	r3,0
-	mtspr	SPRN_SPRG2,r3	/* 0 => not in RTAS */
-
-	/* stack */
-	lis	r1,init_thread_union@ha
-	addi	r1,r1,init_thread_union@l
-	li	r0,0
-	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
-/*
- * Do early bootinfo parsing, platform-specific initialization,
- * and set up the MMU.
- */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
-	bl	machine_init
-	bl	MMU_init
-
-/*
- * Go back to running unmapped so we can load up new values
- * for SDR1 (hash table pointer) and the segment registers
- * and change to using our exception vectors.
- */
-	lis	r4,2f@h
-	ori	r4,r4,2f@l
-	tophys(r4,r4)
-	li	r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
-	FIX_SRR1(r3,r5)
-	mtspr	SPRN_SRR0,r4
-	mtspr	SPRN_SRR1,r3
-	SYNC
-	RFI
-/* Load up the kernel context */
-2:	bl	load_up_mmu
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Add helper information for the Abatron bdiGDB debugger.
-	 * We do this here because we know the mmu is disabled, and
-	 * will be enabled for real in just a few instructions.
-	 */
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	stw	r5, 0xf0(r0)	/* This much match your Abatron config */
-	lis	r6, swapper_pg_dir@h
-	ori	r6, r6, swapper_pg_dir@l
-	tophys(r5, r5)
-	stw	r6, 0(r5)
-#endif /* CONFIG_BDI_SWITCH */
-
-/* Now turn on the MMU for real! */
-	li	r4,MSR_KERNEL
-	FIX_SRR1(r4,r5)
-	lis	r3,start_kernel@h
-	ori	r3,r3,start_kernel@l
-	mtspr	SPRN_SRR0,r3
-	mtspr	SPRN_SRR1,r4
-	SYNC
-	RFI
-
-/*
- * Set up the segment registers for a new context.
- */
-_GLOBAL(set_context)
-	mulli	r3,r3,897	/* multiply context by skew factor */
-	rlwinm	r3,r3,4,8,27	/* VSID = (context & 0xfffff) << 4 */
-	addis	r3,r3,0x6000	/* Set Ks, Ku bits */
-	li	r0,NUM_USER_SEGMENTS
-	mtctr	r0
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Context switch the PTE pointer for the Abatron BDI2000.
-	 * The PGDIR is passed as second argument.
-	 */
-	lis	r5, KERNELBASE@h
-	lwz	r5, 0xf0(r5)
-	stw	r4, 0x4(r5)
-#endif
-	li	r4,0
-	isync
-3:
-	mtsrin	r3,r4
-	addi	r3,r3,0x111	/* next VSID */
-	rlwinm	r3,r3,0,8,3	/* clear out any overflow from VSID field */
-	addis	r4,r4,0x1000	/* address of next segment */
-	bdnz	3b
-	sync
-	isync
-	blr
-
-/*
- * An undocumented "feature" of 604e requires that the v bit
- * be cleared before changing BAT values.
- *
- * Also, newer IBM firmware does not clear bat3 and 4 so
- * this makes sure it's done.
- *  -- Cort
- */
-clear_bats:
-	li	r10,0
-	mfspr	r9,SPRN_PVR
-	rlwinm	r9,r9,16,16,31		/* r9 = 1 for 601, 4 for 604 */
-	cmpwi	r9, 1
-	beq	1f
-
-	mtspr	SPRN_DBAT0U,r10
-	mtspr	SPRN_DBAT0L,r10
-	mtspr	SPRN_DBAT1U,r10
-	mtspr	SPRN_DBAT1L,r10
-	mtspr	SPRN_DBAT2U,r10
-	mtspr	SPRN_DBAT2L,r10
-	mtspr	SPRN_DBAT3U,r10
-	mtspr	SPRN_DBAT3L,r10
-1:
-	mtspr	SPRN_IBAT0U,r10
-	mtspr	SPRN_IBAT0L,r10
-	mtspr	SPRN_IBAT1U,r10
-	mtspr	SPRN_IBAT1L,r10
-	mtspr	SPRN_IBAT2U,r10
-	mtspr	SPRN_IBAT2L,r10
-	mtspr	SPRN_IBAT3U,r10
-	mtspr	SPRN_IBAT3L,r10
-BEGIN_FTR_SECTION
-	/* Here's a tweak: at this point, CPU setup have
-	 * not been called yet, so HIGH_BAT_EN may not be
-	 * set in HID0 for the 745x processors. However, it
-	 * seems that doesn't affect our ability to actually
-	 * write to these SPRs.
-	 */
-	mtspr	SPRN_DBAT4U,r10
-	mtspr	SPRN_DBAT4L,r10
-	mtspr	SPRN_DBAT5U,r10
-	mtspr	SPRN_DBAT5L,r10
-	mtspr	SPRN_DBAT6U,r10
-	mtspr	SPRN_DBAT6L,r10
-	mtspr	SPRN_DBAT7U,r10
-	mtspr	SPRN_DBAT7L,r10
-	mtspr	SPRN_IBAT4U,r10
-	mtspr	SPRN_IBAT4L,r10
-	mtspr	SPRN_IBAT5U,r10
-	mtspr	SPRN_IBAT5L,r10
-	mtspr	SPRN_IBAT6U,r10
-	mtspr	SPRN_IBAT6L,r10
-	mtspr	SPRN_IBAT7U,r10
-	mtspr	SPRN_IBAT7L,r10
-END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS)
-	blr
-
-flush_tlbs:
-	lis	r10, 0x40
-1:	addic.	r10, r10, -0x1000
-	tlbie	r10
-	blt	1b
-	sync
-	blr
-
-mmu_off:
- 	addi	r4, r3, __after_mmu_off - _start
-	mfmsr	r3
-	andi.	r0,r3,MSR_DR|MSR_IR		/* MMU enabled? */
-	beqlr
-	andc	r3,r3,r0
-	mtspr	SPRN_SRR0,r4
-	mtspr	SPRN_SRR1,r3
-	sync
-	RFI
-
-/*
- * Use the first pair of BAT registers to map the 1st 16MB
- * of RAM to KERNELBASE.  From this point on we can't safely
- * call OF any more.
- */
-initial_bats:
-	lis	r11,KERNELBASE@h
-	mfspr	r9,SPRN_PVR
-	rlwinm	r9,r9,16,16,31		/* r9 = 1 for 601, 4 for 604 */
-	cmpwi	0,r9,1
-	bne	4f
-	ori	r11,r11,4		/* set up BAT registers for 601 */
-	li	r8,0x7f			/* valid, block length = 8MB */
-	oris	r9,r11,0x800000@h	/* set up BAT reg for 2nd 8M */
-	oris	r10,r8,0x800000@h	/* set up BAT reg for 2nd 8M */
-	mtspr	SPRN_IBAT0U,r11		/* N.B. 601 has valid bit in */
-	mtspr	SPRN_IBAT0L,r8		/* lower BAT register */
-	mtspr	SPRN_IBAT1U,r9
-	mtspr	SPRN_IBAT1L,r10
-	isync
-	blr
-
-4:	tophys(r8,r11)
-#ifdef CONFIG_SMP
-	ori	r8,r8,0x12		/* R/W access, M=1 */
-#else
-	ori	r8,r8,2			/* R/W access */
-#endif /* CONFIG_SMP */
-	ori	r11,r11,BL_256M<<2|0x2	/* set up BAT registers for 604 */
-
-	mtspr	SPRN_DBAT0L,r8		/* N.B. 6xx (not 601) have valid */
-	mtspr	SPRN_DBAT0U,r11		/* bit in upper BAT register */
-	mtspr	SPRN_IBAT0L,r8
-	mtspr	SPRN_IBAT0U,r11
-	isync
-	blr
-
-#ifdef CONFIG_BOOTX_TEXT
-setup_disp_bat:
-	/*
-	 * setup the display bat prepared for us in prom.c
-	 */
-	mflr	r8
-	bl	reloc_offset
-	mtlr	r8
-	addis	r8,r3,disp_BAT@ha
-	addi	r8,r8,disp_BAT@l
-	lwz	r11,0(r8)
-	lwz	r8,4(r8)
-	mfspr	r9,SPRN_PVR
-	rlwinm	r9,r9,16,16,31		/* r9 = 1 for 601, 4 for 604 */
-	cmpwi	0,r9,1
-	beq	1f
-	mtspr	SPRN_DBAT3L,r8
-	mtspr	SPRN_DBAT3U,r11
-	blr
-1:	mtspr	SPRN_IBAT3L,r8
-	mtspr	SPRN_IBAT3U,r11
-	blr
-
-#endif /* defined(CONFIG_BOOTX_TEXT) */
-
-#ifdef CONFIG_8260
-/* Jump into the system reset for the rom.
- * We first disable the MMU, and then jump to the ROM reset address.
- *
- * r3 is the board info structure, r4 is the location for starting.
- * I use this for building a small kernel that can load other kernels,
- * rather than trying to write or rely on a rom monitor that can tftp load.
- */
-       .globl  m8260_gorom
-m8260_gorom:
-	mfmsr	r0
-	rlwinm	r0,r0,0,17,15	/* clear MSR_EE in r0 */
-	sync
-	mtmsr	r0
-	sync
-	mfspr	r11, SPRN_HID0
-	lis	r10, 0
-	ori	r10,r10,HID0_ICE|HID0_DCE
-	andc	r11, r11, r10
-	mtspr	SPRN_HID0, r11
-	isync
-	li	r5, MSR_ME|MSR_RI
-	lis	r6,2f@h
-	addis	r6,r6,-KERNELBASE@h
-	ori	r6,r6,2f@l
-	mtspr	SPRN_SRR0,r6
-	mtspr	SPRN_SRR1,r5
-	isync
-	sync
-	rfi
-2:
-	mtlr	r4
-	blr
-#endif
-
-
-/*
- * We put a few things here that have to be page-aligned.
- * This stuff goes at the beginning of the data segment,
- * which is page-aligned.
- */
-	.data
-	.globl	sdata
-sdata:
-	.globl	empty_zero_page
-empty_zero_page:
-	.space	4096
-
-	.globl	swapper_pg_dir
-swapper_pg_dir:
-	.space	4096
-
-/*
- * This space gets a copy of optional info passed to us by the bootstrap
- * Used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
-	.globl	cmd_line
-cmd_line:
-	.space	512
-
-	.globl intercept_table
-intercept_table:
-	.long 0, 0, i0x200, i0x300, i0x400, 0, i0x600, i0x700
-	.long i0x800, 0, 0, 0, 0, i0xd00, 0, 0
-	.long 0, 0, 0, i0x1300, 0, 0, 0, 0
-	.long 0, 0, 0, 0, 0, 0, 0, 0
-	.long 0, 0, 0, 0, 0, 0, 0, 0
-	.long 0, 0, 0, 0, 0, 0, 0, 0
-
-/* Room for two PTE pointers, usually the kernel and current user pointers
- * to their respective root page table.
- */
-abatron_pteptrs:
-	.space	8
diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S
deleted file mode 100644
index ebb5a403829f..000000000000
--- a/arch/ppc/kernel/head_44x.S
+++ /dev/null
@@ -1,769 +0,0 @@
-/*
- * Kernel execution entry point code.
- *
- *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
- *      Initial PowerPC version.
- *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
- *      Rewritten for PReP
- *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Low-level exception handers, MMU support, and rewrite.
- *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
- *      PowerPC 8xx modifications.
- *    Copyright (c) 1998-1999 TiVo, Inc.
- *      PowerPC 403GCX modifications.
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *      PowerPC 403GCX/405GP modifications.
- *    Copyright 2000 MontaVista Software Inc.
- *	PPC405 modifications
- *      PowerPC 403GCX/405GP modifications.
- * 	Author: MontaVista Software, Inc.
- *         	frank_rowand@mvista.com or source@mvista.com
- * 	   	debbie_chu@mvista.com
- *    Copyright 2002-2005 MontaVista Software, Inc.
- *      PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/ibm4xx.h>
-#include <asm/ibm44x.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include "head_booke.h"
-
-
-/* As with the other PowerPC ports, it is expected that when code
- * execution begins here, the following registers contain valid, yet
- * optional, information:
- *
- *   r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
- *   r4 - Starting address of the init RAM disk
- *   r5 - Ending address of the init RAM disk
- *   r6 - Start of kernel command line string (e.g. "mem=128")
- *   r7 - End of kernel command line string
- *
- */
-	.text
-_GLOBAL(_stext)
-_GLOBAL(_start)
-	/*
-	 * Reserve a word at a fixed location to store the address
-	 * of abatron_pteptrs
-	 */
-	nop
-/*
- * Save parameters we are passed
- */
-	mr	r31,r3
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
-	li	r24,0		/* CPU number */
-
-/*
- * Set up the initial MMU state
- *
- * We are still executing code at the virtual address
- * mappings set by the firmware for the base of RAM.
- *
- * We first invalidate all TLB entries but the one
- * we are running from.  We then load the KERNELBASE
- * mappings so we can begin to use kernel addresses
- * natively and so the interrupt vector locations are
- * permanently pinned (necessary since Book E
- * implementations always have translation enabled).
- *
- * TODO: Use the known TLB entry we are running from to
- *	 determine which physical region we are located
- *	 in.  This can be used to determine where in RAM
- *	 (on a shared CPU system) or PCI memory space
- *	 (on a DRAMless system) we are located.
- *       For now, we assume a perfect world which means
- *	 we are located at the base of DRAM (physical 0).
- */
-
-/*
- * Search TLB for entry that we are currently using.
- * Invalidate all entries but the one we are using.
- */
-	/* Load our current PID->MMUCR TID and MSR IS->MMUCR STS */
-	mfspr	r3,SPRN_PID			/* Get PID */
-	mfmsr	r4				/* Get MSR */
-	andi.	r4,r4,MSR_IS@l			/* TS=1? */
-	beq	wmmucr				/* If not, leave STS=0 */
-	oris	r3,r3,PPC44x_MMUCR_STS@h	/* Set STS=1 */
-wmmucr:	mtspr	SPRN_MMUCR,r3			/* Put MMUCR */
-	sync
-
-	bl	invstr				/* Find our address */
-invstr:	mflr	r5				/* Make it accessible */
-	tlbsx	r23,0,r5			/* Find entry we are in */
-	li	r4,0				/* Start at TLB entry 0 */
-	li	r3,0				/* Set PAGEID inval value */
-1:	cmpw	r23,r4				/* Is this our entry? */
-	beq	skpinv				/* If so, skip the inval */
-	tlbwe	r3,r4,PPC44x_TLB_PAGEID		/* If not, inval the entry */
-skpinv:	addi	r4,r4,1				/* Increment */
-	cmpwi	r4,64				/* Are we done? */
-	bne	1b				/* If not, repeat */
-	isync					/* If so, context change */
-
-/*
- * Configure and load pinned entry into TLB slot 63.
- */
-
-	lis	r3,KERNELBASE@h		/* Load the kernel virtual address */
-	ori	r3,r3,KERNELBASE@l
-
-	/* Kernel is at the base of RAM */
-	li r4, 0			/* Load the kernel physical address */
-
-	/* Load the kernel PID = 0 */
-	li	r0,0
-	mtspr	SPRN_PID,r0
-	sync
-
-	/* Initialize MMUCR */
-	li	r5,0
-	mtspr	SPRN_MMUCR,r5
-	sync
-
- 	/* pageid fields */
-	clrrwi	r3,r3,10		/* Mask off the effective page number */
-	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_256M
-
-	/* xlat fields */
-	clrrwi	r4,r4,10		/* Mask off the real page number */
-					/* ERPN is 0 for first 4GB page */
-
-	/* attrib fields */
-	/* Added guarded bit to protect against speculative loads/stores */
-	li	r5,0
-	ori	r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G)
-
-        li      r0,63                    /* TLB slot 63 */
-
-	tlbwe	r3,r0,PPC44x_TLB_PAGEID	/* Load the pageid fields */
-	tlbwe	r4,r0,PPC44x_TLB_XLAT	/* Load the translation fields */
-	tlbwe	r5,r0,PPC44x_TLB_ATTRIB	/* Load the attrib/access fields */
-
-	/* Force context change */
-	mfmsr	r0
-	mtspr	SPRN_SRR1, r0
-	lis	r0,3f@h
-	ori	r0,r0,3f@l
-	mtspr	SPRN_SRR0,r0
-	sync
-	rfi
-
-	/* If necessary, invalidate original entry we used */
-3:	cmpwi	r23,63
-	beq	4f
-	li	r6,0
-	tlbwe   r6,r23,PPC44x_TLB_PAGEID
-	isync
-
-4:
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	/*
-	 * Add temporary UART mapping for early debug.
-	 * We can map UART registers wherever we want as long as they don't
-	 * interfere with other system mappings (e.g. with pinned entries).
-	 * For an example of how we handle this - see ocotea.h.       --ebs
-	 */
- 	/* pageid fields */
-	lis	r3,UART0_IO_BASE@h
-	ori	r3,r3,PPC44x_TLB_VALID | PPC44x_TLB_4K
-
-	/* xlat fields */
-	lis	r4,UART0_PHYS_IO_BASE@h		/* RPN depends on SoC */
-#ifdef UART0_PHYS_ERPN
-	ori	r4,r4,UART0_PHYS_ERPN		/* Add ERPN if above 4GB */
-#endif
-
-	/* attrib fields */
-	li	r5,0
-	ori	r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G)
-
-	li	r0,62			/* TLB slot 62 */
-
-	tlbwe	r3,r0,PPC44x_TLB_PAGEID	/* Load the pageid fields */
-	tlbwe	r4,r0,PPC44x_TLB_XLAT	/* Load the translation fields */
-	tlbwe	r5,r0,PPC44x_TLB_ATTRIB	/* Load the attrib/access fields */
-
-	/* Force context change */
-	isync
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
-
-	/* Establish the interrupt vector offsets */
-	SET_IVOR(0,  CriticalInput);
-	SET_IVOR(1,  MachineCheck);
-	SET_IVOR(2,  DataStorage);
-	SET_IVOR(3,  InstructionStorage);
-	SET_IVOR(4,  ExternalInput);
-	SET_IVOR(5,  Alignment);
-	SET_IVOR(6,  Program);
-	SET_IVOR(7,  FloatingPointUnavailable);
-	SET_IVOR(8,  SystemCall);
-	SET_IVOR(9,  AuxillaryProcessorUnavailable);
-	SET_IVOR(10, Decrementer);
-	SET_IVOR(11, FixedIntervalTimer);
-	SET_IVOR(12, WatchdogTimer);
-	SET_IVOR(13, DataTLBError);
-	SET_IVOR(14, InstructionTLBError);
-	SET_IVOR(15, Debug);
-
-	/* Establish the interrupt vector base */
-	lis	r4,interrupt_base@h	/* IVPR only uses the high 16-bits */
-	mtspr	SPRN_IVPR,r4
-
-	/*
-	 * This is where the main kernel code starts.
-	 */
-
-	/* ptr to current */
-	lis	r2,init_task@h
-	ori	r2,r2,init_task@l
-
-	/* ptr to current thread */
-	addi	r4,r2,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
-
-	/* stack */
-	lis	r1,init_thread_union@h
-	ori	r1,r1,init_thread_union@l
-	li	r0,0
-	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
-
-	bl	early_init
-
-/*
- * Decide what sort of machine this is and initialize the MMU.
- */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
-	bl	machine_init
-	bl	MMU_init
-
-	/* Setup PTE pointers for the Abatron bdiGDB */
-	lis	r6, swapper_pg_dir@h
-	ori	r6, r6, swapper_pg_dir@l
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	lis	r4, KERNELBASE@h
-	ori	r4, r4, KERNELBASE@l
-	stw	r5, 0(r4)	/* Save abatron_pteptrs at a fixed location */
-	stw	r6, 0(r5)
-
-	/* Let's move on */
-	lis	r4,start_kernel@h
-	ori	r4,r4,start_kernel@l
-	lis	r3,MSR_KERNEL@h
-	ori	r3,r3,MSR_KERNEL@l
-	mtspr	SPRN_SRR0,r4
-	mtspr	SPRN_SRR1,r3
-	rfi			/* change context and jump to start_kernel */
-
-/*
- * Interrupt vector entry code
- *
- * The Book E MMUs are always on so we don't need to handle
- * interrupts in real mode as with previous PPC processors. In
- * this case we handle interrupts in the kernel virtual address
- * space.
- *
- * Interrupt vectors are dynamically placed relative to the
- * interrupt prefix as determined by the address of interrupt_base.
- * The interrupt vectors offsets are programmed using the labels
- * for each interrupt vector entry.
- *
- * Interrupt vectors must be aligned on a 16 byte boundary.
- * We align on a 32 byte cache line boundary for good measure.
- */
-
-interrupt_base:
-	/* Critical Input Interrupt */
-	CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception)
-
-	/* Machine Check Interrupt */
-#ifdef CONFIG_440A
-	MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-#else
-	CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-#endif
-
-	/* Data Storage Interrupt */
-	START_EXCEPTION(DataStorage)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-
-	/*
-	 * Check if it was a store fault, if not then bail
-	 * because a user tried to access a kernel or
-	 * read-protected page.  Otherwise, get the
-	 * offending address and handle it.
-	 */
-	mfspr	r10, SPRN_ESR
-	andis.	r10, r10, ESR_ST@h
-	beq	2f
-
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-
-	mfspr   r12,SPRN_MMUCR
-	rlwinm	r12,r12,0,0,23		/* Clear TID */
-
-	b	4f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-
-	/* Load PID into MMUCR TID */
-	mfspr	r12,SPRN_MMUCR		/* Get MMUCR */
-	mfspr   r13,SPRN_PID		/* Get PID */
-	rlwimi	r12,r13,0,24,31		/* Set TID */
-
-4:
-	mtspr   SPRN_MMUCR,r12
-
-	rlwinm  r12, r10, 13, 19, 29    /* Compute pgdir/pmd offset */
-	lwzx    r11, r12, r11           /* Get pgd/pmd entry */
-	rlwinm. r12, r11, 0, 0, 20      /* Extract pt base address */
-	beq     2f                      /* Bail if no table */
-
-	rlwimi  r12, r10, 23, 20, 28    /* Compute pte address */
-	lwz     r11, 4(r12)             /* Get pte entry */
-
-	andi.	r13, r11, _PAGE_RW	/* Is it writeable? */
-	beq	2f			/* Bail if not */
-
-	/* Update 'changed'.
-	*/
-	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-	stw	r11, 4(r12)		/* Update Linux page table */
-
-	li	r13, PPC44x_TLB_SR@l	/* Set SR */
-	rlwimi	r13, r11, 29, 29, 29	/* SX = _PAGE_HWEXEC */
-	rlwimi	r13, r11, 0, 30, 30	/* SW = _PAGE_RW */
-	rlwimi	r13, r11, 29, 28, 28	/* UR = _PAGE_USER */
-	rlwimi	r12, r11, 31, 26, 26	/* (_PAGE_USER>>1)->r12 */
-	rlwimi	r12, r11, 29, 30, 30	/* (_PAGE_USER>>3)->r12 */
-	and	r12, r12, r11		/* HWEXEC/RW & USER */
-	rlwimi	r13, r12, 0, 26, 26	/* UX = HWEXEC & USER */
-	rlwimi	r13, r12, 3, 27, 27	/* UW = RW & USER */
-
-	rlwimi	r11,r13,0,26,31		/* Insert static perms */
-
-	rlwinm	r11,r11,0,20,15		/* Clear U0-U3 */
-
-	/* find the TLB index that caused the fault.  It has to be here. */
-	tlbsx	r10, 0, r10
-
-	tlbwe	r11, r10, PPC44x_TLB_ATTRIB	/* Write ATTRIB */
-
-	/* Done...restore registers and get out of here.
-	*/
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	rfi			/* Force context change */
-
-2:
-	/*
-	 * The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	data_access
-
-	/* Instruction Storage Interrupt */
-	INSTRUCTION_STORAGE_EXCEPTION
-
-	/* External Input Interrupt */
-	EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE)
-
-	/* Alignment Interrupt */
-	ALIGNMENT_EXCEPTION
-
-	/* Program Interrupt */
-	PROGRAM_EXCEPTION
-
-	/* Floating Point Unavailable Interrupt */
-#ifdef CONFIG_PPC_FPU
-	FP_UNAVAILABLE_EXCEPTION
-#else
-	EXCEPTION(0x2010, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE)
-#endif
-
-	/* System Call Interrupt */
-	START_EXCEPTION(SystemCall)
-	NORMAL_EXCEPTION_PROLOG
-	EXC_XFER_EE_LITE(0x0c00, DoSyscall)
-
-	/* Auxillary Processor Unavailable Interrupt */
-	EXCEPTION(0x2020, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE)
-
-	/* Decrementer Interrupt */
-	DECREMENTER_EXCEPTION
-
-	/* Fixed Internal Timer Interrupt */
-	/* TODO: Add FIT support */
-	EXCEPTION(0x1010, FixedIntervalTimer, unknown_exception, EXC_XFER_EE)
-
-	/* Watchdog Timer Interrupt */
-	/* TODO: Add watchdog support */
-#ifdef CONFIG_BOOKE_WDT
-	CRITICAL_EXCEPTION(0x1020, WatchdogTimer, WatchdogException)
-#else
-	CRITICAL_EXCEPTION(0x1020, WatchdogTimer, unknown_exception)
-#endif
-
-	/* Data TLB Error Interrupt */
-	START_EXCEPTION(DataTLBError)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-
-	mfspr	r12,SPRN_MMUCR
-	rlwinm	r12,r12,0,0,23		/* Clear TID */
-
-	b	4f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-
-	/* Load PID into MMUCR TID */
-	mfspr	r12,SPRN_MMUCR
-	mfspr   r13,SPRN_PID		/* Get PID */
-	rlwimi	r12,r13,0,24,31		/* Set TID */
-
-4:
-	mtspr	SPRN_MMUCR,r12
-
-	rlwinm 	r12, r10, 13, 19, 29	/* Compute pgdir/pmd offset */
-	lwzx	r11, r12, r11		/* Get pgd/pmd entry */
-	rlwinm.	r12, r11, 0, 0, 20	/* Extract pt base address */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 23, 20, 28	/* Compute pte address */
-	lwz	r11, 4(r12)		/* Get pte entry */
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
-
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 4(r12)
-
-	 /* Jump to common tlb load */
-	b	finish_tlb_load
-
-2:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	data_access
-
-	/* Instruction TLB Error Interrupt */
-	/*
-	 * Nearly the same as above, except we get our
-	 * information from different registers and bailout
-	 * to a different point.
-	 */
-	START_EXCEPTION(InstructionTLBError)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-	mtspr	SPRN_SPRG4W, r12
-	mtspr	SPRN_SPRG5W, r13
-	mfcr	r11
-	mtspr	SPRN_SPRG7W, r11
-	mfspr	r10, SPRN_SRR0		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-
-	mfspr	r12,SPRN_MMUCR
-	rlwinm	r12,r12,0,0,23		/* Clear TID */
-
-	b	4f
-
-	/* Get the PGD for the current thread */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-
-	/* Load PID into MMUCR TID */
-	mfspr	r12,SPRN_MMUCR
-	mfspr   r13,SPRN_PID		/* Get PID */
-	rlwimi	r12,r13,0,24,31		/* Set TID */
-
-4:
-	mtspr	SPRN_MMUCR,r12
-
-	rlwinm	r12, r10, 13, 19, 29	/* Compute pgdir/pmd offset */
-	lwzx	r11, r12, r11		/* Get pgd/pmd entry */
-	rlwinm.	r12, r11, 0, 0, 20	/* Extract pt base address */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 23, 20, 28	/* Compute pte address */
-	lwz	r11, 4(r12)		/* Get pte entry */
-	andi.	r13, r11, _PAGE_PRESENT	/* Is the page present? */
-	beq	2f			/* Bail if not present */
-
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 4(r12)
-
-	/* Jump to common TLB load point */
-	b	finish_tlb_load
-
-2:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	InstructionStorage
-
-	/* Debug Interrupt */
-	DEBUG_EXCEPTION
-
-/*
- * Local functions
- */
-	/*
-	 * Data TLB exceptions will bail out to this point
-	 * if they can't resolve the lightweight TLB fault.
-	 */
-data_access:
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
-	stw	r5,_ESR(r11)
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
-	EXC_XFER_EE_LITE(0x0300, handle_page_fault)
-
-/*
-
- * Both the instruction and data TLB miss get to this
- * point to load the TLB.
- * 	r10 - EA of fault
- * 	r11 - available to use
- *	r12 - Pointer to the 64-bit PTE
- *	r13 - available to use
- *	MMUCR - loaded with proper value when we get here
- *	Upon exit, we reload everything and RFI.
- */
-finish_tlb_load:
-	/*
-	 * We set execute, because we don't have the granularity to
-	 * properly set this at the page level (Linux problem).
-	 * If shared is set, we cause a zero PID->TID load.
-	 * Many of these bits are software only.  Bits we don't set
-	 * here we (properly should) assume have the appropriate value.
-	 */
-
-	/* Load the next available TLB index */
-	lis	r13, tlb_44x_index@ha
-	lwz	r13, tlb_44x_index@l(r13)
-	/* Load the TLB high watermark */
-	lis	r11, tlb_44x_hwater@ha
-	lwz	r11, tlb_44x_hwater@l(r11)
-
-	/* Increment, rollover, and store TLB index */
-	addi	r13, r13, 1
-	cmpw	0, r13, r11			/* reserve entries */
-	ble	7f
-	li	r13, 0
-7:
-	/* Store the next available TLB index */
-	lis	r11, tlb_44x_index@ha
-	stw	r13, tlb_44x_index@l(r11)
-
-	lwz	r11, 0(r12)			/* Get MS word of PTE */
-	lwz	r12, 4(r12)			/* Get LS word of PTE */
-	rlwimi	r11, r12, 0, 0 , 19		/* Insert RPN */
-	tlbwe	r11, r13, PPC44x_TLB_XLAT	/* Write XLAT */
-
-	/*
-	 * Create PAGEID. This is the faulting address,
-	 * page size, and valid flag.
-	 */
-	li	r11, PPC44x_TLB_VALID | PPC44x_TLB_4K
-	rlwimi	r10, r11, 0, 20, 31		/* Insert valid and page size */
-	tlbwe	r10, r13, PPC44x_TLB_PAGEID	/* Write PAGEID */
-
-	li	r10, PPC44x_TLB_SR@l		/* Set SR */
-	rlwimi	r10, r12, 0, 30, 30		/* Set SW = _PAGE_RW */
-	rlwimi	r10, r12, 29, 29, 29		/* SX = _PAGE_HWEXEC */
-	rlwimi	r10, r12, 29, 28, 28		/* UR = _PAGE_USER */
-	rlwimi	r11, r12, 31, 26, 26		/* (_PAGE_USER>>1)->r12 */
-	and	r11, r12, r11			/* HWEXEC & USER */
-	rlwimi	r10, r11, 0, 26, 26		/* UX = HWEXEC & USER */
-
-	rlwimi	r12, r10, 0, 26, 31		/* Insert static perms */
-	rlwinm	r12, r12, 0, 20, 15		/* Clear U0-U3 */
-	tlbwe	r12, r13, PPC44x_TLB_ATTRIB	/* Write ATTRIB */
-
-	/* Done...restore registers and get out of here.
-	*/
-	mfspr	r11, SPRN_SPRG7R
-	mtcr	r11
-	mfspr	r13, SPRN_SPRG5R
-	mfspr	r12, SPRN_SPRG4R
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	rfi					/* Force context change */
-
-/*
- * Global functions
- */
-
-/*
- * extern void giveup_altivec(struct task_struct *prev)
- *
- * The 44x core does not have an AltiVec unit.
- */
-_GLOBAL(giveup_altivec)
-	blr
-
-/*
- * extern void giveup_fpu(struct task_struct *prev)
- *
- * The 44x core does not have an FPU.
- */
-#ifndef CONFIG_PPC_FPU
-_GLOBAL(giveup_fpu)
-	blr
-#endif
-
-/*
- * extern void abort(void)
- *
- * At present, this routine just applies a system reset.
- */
-_GLOBAL(abort)
-        mfspr   r13,SPRN_DBCR0
-        oris    r13,r13,DBCR0_RST_SYSTEM@h
-        mtspr   SPRN_DBCR0,r13
-
-_GLOBAL(set_context)
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Context switch the PTE pointer for the Abatron BDI2000.
-	 * The PGDIR is the second parameter.
-	 */
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	stw	r4, 0x4(r5)
-#endif
-	mtspr	SPRN_PID,r3
-	isync			/* Force context change */
-	blr
-
-/*
- * We put a few things here that have to be page-aligned. This stuff
- * goes at the beginning of the data segment, which is page-aligned.
- */
-	.data
-	.align	12
-	.globl	sdata
-sdata:
-	.globl	empty_zero_page
-empty_zero_page:
-	.space	4096
-
-/*
- * To support >32-bit physical addresses, we use an 8KB pgdir.
- */
-	.globl	swapper_pg_dir
-swapper_pg_dir:
-	.space	8192
-
-/* Reserved 4k for the critical exception stack & 4k for the machine
- * check stack per CPU for kernel mode exceptions */
-	.section .bss
-        .align 12
-exception_stack_bottom:
-	.space	BOOKE_EXCEPTION_STACK_SIZE
-	.globl	exception_stack_top
-exception_stack_top:
-
-/*
- * This space gets a copy of optional info passed to us by the bootstrap
- * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
-	.globl	cmd_line
-cmd_line:
-	.space	512
-
-/*
- * Room for two PTE pointers, usually the kernel and current user pointers
- * to their respective root page table.
- */
-abatron_pteptrs:
-	.space	8
diff --git a/arch/ppc/kernel/head_4xx.S b/arch/ppc/kernel/head_4xx.S
deleted file mode 100644
index 51da157a629e..000000000000
--- a/arch/ppc/kernel/head_4xx.S
+++ /dev/null
@@ -1,1021 +0,0 @@
-/*
- *    Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org>
- *      Initial PowerPC version.
- *    Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu>
- *      Rewritten for PReP
- *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Low-level exception handers, MMU support, and rewrite.
- *    Copyright (c) 1997 Dan Malek <dmalek@jlc.net>
- *      PowerPC 8xx modifications.
- *    Copyright (c) 1998-1999 TiVo, Inc.
- *      PowerPC 403GCX modifications.
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *      PowerPC 403GCX/405GP modifications.
- *    Copyright 2000 MontaVista Software Inc.
- *	PPC405 modifications
- *      PowerPC 403GCX/405GP modifications.
- * 	Author: MontaVista Software, Inc.
- *         	frank_rowand@mvista.com or source@mvista.com
- * 	   	debbie_chu@mvista.com
- *
- *
- *    Module name: head_4xx.S
- *
- *    Description:
- *      Kernel execution entry point code.
- *
- *    This program is free software; you can redistribute it and/or
- *    modify it under the terms of the GNU General Public License
- *    as published by the Free Software Foundation; either version
- *    2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/ibm4xx.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-
-/* As with the other PowerPC ports, it is expected that when code
- * execution begins here, the following registers contain valid, yet
- * optional, information:
- *
- *   r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.)
- *   r4 - Starting address of the init RAM disk
- *   r5 - Ending address of the init RAM disk
- *   r6 - Start of kernel command line string (e.g. "mem=96m")
- *   r7 - End of kernel command line string
- *
- * This is all going to change RSN when we add bi_recs.......  -- Dan
- */
-	.text
-_GLOBAL(_stext)
-_GLOBAL(_start)
-
-	/* Save parameters we are passed.
-	*/
-	mr	r31,r3
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
-
-	/* We have to turn on the MMU right away so we get cache modes
-	 * set correctly.
-	 */
-	bl	initial_mmu
-
-/* We now have the lower 16 Meg mapped into TLB entries, and the caches
- * ready to work.
- */
-turn_on_mmu:
-	lis	r0,MSR_KERNEL@h
-	ori	r0,r0,MSR_KERNEL@l
-	mtspr	SPRN_SRR1,r0
-	lis	r0,start_here@h
-	ori	r0,r0,start_here@l
-	mtspr	SPRN_SRR0,r0
-	SYNC
-	rfi				/* enables MMU */
-	b	.			/* prevent prefetch past rfi */
-
-/*
- * This area is used for temporarily saving registers during the
- * critical exception prolog.
- */
-	. = 0xc0
-crit_save:
-_GLOBAL(crit_r10)
-	.space	4
-_GLOBAL(crit_r11)
-	.space	4
-
-/*
- * Exception vector entry code. This code runs with address translation
- * turned off (i.e. using physical addresses). We assume SPRG3 has the
- * physical address of the current task thread_struct.
- * Note that we have to have decremented r1 before we write to any fields
- * of the exception frame, since a critical interrupt could occur at any
- * time, and it will write to the area immediately below the current r1.
- */
-#define NORMAL_EXCEPTION_PROLOG						     \
-	mtspr	SPRN_SPRG0,r10;		/* save two registers to work with */\
-	mtspr	SPRN_SPRG1,r11;						     \
-	mtspr	SPRN_SPRG2,r1;						     \
-	mfcr	r10;			/* save CR in r10 for now	   */\
-	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel    */\
-	andi.	r11,r11,MSR_PR;						     \
-	beq	1f;							     \
-	mfspr	r1,SPRN_SPRG3;		/* if from user, start at top of   */\
-	lwz	r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack   */\
-	addi	r1,r1,THREAD_SIZE;					     \
-1:	subi	r1,r1,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
-	tophys(r11,r1);							     \
-	stw	r10,_CCR(r11);          /* save various registers	   */\
-	stw	r12,GPR12(r11);						     \
-	stw	r9,GPR9(r11);						     \
-	mfspr	r10,SPRN_SPRG0;						     \
-	stw	r10,GPR10(r11);						     \
-	mfspr	r12,SPRN_SPRG1;						     \
-	stw	r12,GPR11(r11);						     \
-	mflr	r10;							     \
-	stw	r10,_LINK(r11);						     \
-	mfspr	r10,SPRN_SPRG2;						     \
-	mfspr	r12,SPRN_SRR0;						     \
-	stw	r10,GPR1(r11);						     \
-	mfspr	r9,SPRN_SRR1;						     \
-	stw	r10,0(r11);						     \
-	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
-	stw	r0,GPR0(r11);						     \
-	SAVE_4GPRS(3, r11);						     \
-	SAVE_2GPRS(7, r11)
-
-/*
- * Exception prolog for critical exceptions.  This is a little different
- * from the normal exception prolog above since a critical exception
- * can potentially occur at any point during normal exception processing.
- * Thus we cannot use the same SPRG registers as the normal prolog above.
- * Instead we use a couple of words of memory at low physical addresses.
- * This is OK since we don't support SMP on these processors.
- */
-#define CRITICAL_EXCEPTION_PROLOG					     \
-	stw	r10,crit_r10@l(0);	/* save two registers to work with */\
-	stw	r11,crit_r11@l(0);					     \
-	mfcr	r10;			/* save CR in r10 for now	   */\
-	mfspr	r11,SPRN_SRR3;		/* check whether user or kernel    */\
-	andi.	r11,r11,MSR_PR;						     \
-	lis	r11,critical_stack_top@h;				     \
-	ori	r11,r11,critical_stack_top@l;				     \
-	beq	1f;							     \
-	/* COMING FROM USER MODE */					     \
-	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
-	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
-	addi	r11,r11,THREAD_SIZE;					     \
-1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
-	tophys(r11,r11);						     \
-	stw	r10,_CCR(r11);          /* save various registers	   */\
-	stw	r12,GPR12(r11);						     \
-	stw	r9,GPR9(r11);						     \
-	mflr	r10;							     \
-	stw	r10,_LINK(r11);						     \
-	mfspr	r12,SPRN_DEAR;		/* save DEAR and ESR in the frame  */\
-	stw	r12,_DEAR(r11);		/* since they may have had stuff   */\
-	mfspr	r9,SPRN_ESR;		/* in them at the point where the  */\
-	stw	r9,_ESR(r11);		/* exception was taken		   */\
-	mfspr	r12,SPRN_SRR2;						     \
-	stw	r1,GPR1(r11);						     \
-	mfspr	r9,SPRN_SRR3;						     \
-	stw	r1,0(r11);						     \
-	tovirt(r1,r11);							     \
-	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
-	stw	r0,GPR0(r11);						     \
-	SAVE_4GPRS(3, r11);						     \
-	SAVE_2GPRS(7, r11)
-
-	/*
-	 * State at this point:
-	 * r9 saved in stack frame, now saved SRR3 & ~MSR_WE
-	 * r10 saved in crit_r10 and in stack frame, trashed
-	 * r11 saved in crit_r11 and in stack frame,
-	 *	now phys stack/exception frame pointer
-	 * r12 saved in stack frame, now saved SRR2
-	 * CR saved in stack frame, CR0.EQ = !SRR3.PR
-	 * LR, DEAR, ESR in stack frame
-	 * r1 saved in stack frame, now virt stack/excframe pointer
-	 * r0, r3-r8 saved in stack frame
-	 */
-
-/*
- * Exception vectors.
- */
-#define	START_EXCEPTION(n, label)					     \
-	. = n;								     \
-label:
-
-#define EXCEPTION(n, label, hdlr, xfer)				\
-	START_EXCEPTION(n, label);				\
-	NORMAL_EXCEPTION_PROLOG;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
-	xfer(n, hdlr)
-
-#define CRITICAL_EXCEPTION(n, label, hdlr)			\
-	START_EXCEPTION(n, label);				\
-	CRITICAL_EXCEPTION_PROLOG;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
-	EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-			  NOCOPY, crit_transfer_to_handler,	\
-			  ret_from_crit_exc)
-
-#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret)	\
-	li	r10,trap;					\
-	stw	r10,TRAP(r11);					\
-	lis	r10,msr@h;					\
-	ori	r10,r10,msr@l;					\
-	copyee(r10, r9);					\
-	bl	tfer;		 				\
-	.long	hdlr;						\
-	.long	ret
-
-#define COPY_EE(d, s)		rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
-			  ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr)	\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
-			  ret_from_except)
-
-
-/*
- * 0x0100 - Critical Interrupt Exception
- */
-	CRITICAL_EXCEPTION(0x0100, CriticalInterrupt, unknown_exception)
-
-/*
- * 0x0200 - Machine Check Exception
- */
-	CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception)
-
-/*
- * 0x0300 - Data Storage Exception
- * This happens for just a few reasons.  U0 set (but we don't do that),
- * or zone protection fault (user violation, write to protected page).
- * If this is just an update of modified status, we do that quickly
- * and exit.  Otherwise, we call heavywight functions to do the work.
- */
-	START_EXCEPTION(0x0300,	DataStorage)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-#ifdef CONFIG_403GCX
-	stw     r12, 0(r0)
-	stw     r9, 4(r0)
-	mfcr    r11
-	mfspr   r12, SPRN_PID
-	stw     r11, 8(r0)
-	stw     r12, 12(r0)
-#else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
-	mfcr	r11
-	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
-#endif
-
-	/* First, check if it was a zone fault (which means a user
-	* tried to access a kernel or read-protected page - always
-	* a SEGV).  All other faults here must be stores, so no
-	* need to check ESR_DST as well. */
-	mfspr	r10, SPRN_ESR
-	andis.	r10, r10, ESR_DIZ@h
-	bne	2f
-
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	li	r9, 0
-	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
-	b	4f
-
-	/* Get the PGD for the current thread.
-	 */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-4:
-	tophys(r11, r11)
-	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
-	lwz	r11, 0(r11)		/* Get L1 entry */
-	rlwinm.	r12, r11, 0, 0, 19	/* Extract L2 (pte) base address */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
-	lwz	r11, 0(r12)		/* Get Linux PTE */
-
-	andi.	r9, r11, _PAGE_RW	/* Is it writeable? */
-	beq	2f			/* Bail if not */
-
-	/* Update 'changed'.
-	*/
-	ori	r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-	stw	r11, 0(r12)		/* Update Linux page table */
-
-	/* Most of the Linux PTE is ready to load into the TLB LO.
-	 * We set ZSEL, where only the LS-bit determines user access.
-	 * We set execute, because we don't have the granularity to
-	 * properly set this at the page level (Linux problem).
-	 * If shared is set, we cause a zero PID->TID load.
-	 * Many of these bits are software only.  Bits we don't set
-	 * here we (properly should) assume have the appropriate value.
-	 */
-	li	r12, 0x0ce2
-	andc	r11, r11, r12		/* Make sure 20, 21 are zero */
-
-	/* find the TLB index that caused the fault.  It has to be here.
-	*/
-	tlbsx	r9, 0, r10
-
-	tlbwe	r11, r9, TLB_DATA		/* Load TLB LO */
-
-	/* Done...restore registers and get out of here.
-	*/
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	PPC405_ERR77_SYNC
-	rfi			/* Should sync shadow TLBs */
-	b	.		/* prevent prefetch past rfi */
-
-2:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	DataAccess
-
-/*
- * 0x0400 - Instruction Storage Exception
- * This is caused by a fetch from non-execute or guarded pages.
- */
-	START_EXCEPTION(0x0400, InstructionAccess)
-	NORMAL_EXCEPTION_PROLOG
-	mr	r4,r12			/* Pass SRR0 as arg2 */
-	li	r5,0			/* Pass zero as arg3 */
-	EXC_XFER_EE_LITE(0x400, handle_page_fault)
-
-/* 0x0500 - External Interrupt Exception */
-	EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
-
-/* 0x0600 - Alignment Exception */
-	START_EXCEPTION(0x0600, Alignment)
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR and save it */
-	stw	r4,_DEAR(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0x600, alignment_exception)
-
-/* 0x0700 - Program Exception */
-	START_EXCEPTION(0x0700, ProgramCheck)
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r4,SPRN_ESR		/* Grab the ESR and save it */
-	stw	r4,_ESR(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_STD(0x700, program_check_exception)
-
-	EXCEPTION(0x0800, Trap_08, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0900, Trap_09, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0A00, Trap_0A, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0B00, Trap_0B, unknown_exception, EXC_XFER_EE)
-
-/* 0x0C00 - System Call Exception */
-	START_EXCEPTION(0x0C00,	SystemCall)
-	NORMAL_EXCEPTION_PROLOG
-	EXC_XFER_EE_LITE(0xc00, DoSyscall)
-
-	EXCEPTION(0x0D00, Trap_0D, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0E00, Trap_0E, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x0F00, Trap_0F, unknown_exception, EXC_XFER_EE)
-
-/* 0x1000 - Programmable Interval Timer (PIT) Exception */
-	START_EXCEPTION(0x1000, Decrementer)
-	NORMAL_EXCEPTION_PROLOG
-	lis	r0,TSR_PIS@h
-	mtspr	SPRN_TSR,r0		/* Clear the PIT exception */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_LITE(0x1000, timer_interrupt)
-
-#if 0
-/* NOTE:
- * FIT and WDT handlers are not implemented yet.
- */
-
-/* 0x1010 - Fixed Interval Timer (FIT) Exception
-*/
-	STND_EXCEPTION(0x1010,	FITException,		unknown_exception)
-
-/* 0x1020 - Watchdog Timer (WDT) Exception
-*/
-#ifdef CONFIG_BOOKE_WDT
-	CRITICAL_EXCEPTION(0x1020, WDTException, WatchdogException)
-#else
-	CRITICAL_EXCEPTION(0x1020, WDTException, unknown_exception)
-#endif
-#endif
-
-/* 0x1100 - Data TLB Miss Exception
- * As the name implies, translation is not in the MMU, so search the
- * page tables and fix it.  The only purpose of this function is to
- * load TLB entries from the page table if they exist.
- */
-	START_EXCEPTION(0x1100,	DTLBMiss)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-#ifdef CONFIG_403GCX
-	stw     r12, 0(r0)
-	stw     r9, 4(r0)
-	mfcr    r11
-	mfspr   r12, SPRN_PID
-	stw     r11, 8(r0)
-	stw     r12, 12(r0)
-#else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
-	mfcr	r11
-	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
-#endif
-	mfspr	r10, SPRN_DEAR		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	li	r9, 0
-	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
-	b	4f
-
-	/* Get the PGD for the current thread.
-	 */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-4:
-	tophys(r11, r11)
-	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
-	lwz	r12, 0(r11)		/* Get L1 entry */
-	andi.	r9, r12, _PMD_PRESENT	/* Check if it points to a PTE page */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
-	lwz	r11, 0(r12)		/* Get Linux PTE */
-	andi.	r9, r11, _PAGE_PRESENT
-	beq	5f
-
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 0(r12)
-
-	/* Create TLB tag.  This is the faulting address plus a static
-	 * set of bits.  These are size, valid, E, U0.
-	*/
-	li	r12, 0x00c0
-	rlwimi	r10, r12, 0, 20, 31
-
-	b	finish_tlb_load
-
-2:	/* Check for possible large-page pmd entry */
-	rlwinm.	r9, r12, 2, 22, 24
-	beq	5f
-
-	/* Create TLB tag.  This is the faulting address, plus a static
-	 * set of bits (valid, E, U0) plus the size from the PMD.
-	 */
-	ori	r9, r9, 0x40
-	rlwimi	r10, r9, 0, 20, 31
-	mr	r11, r12
-
-	b	finish_tlb_load
-
-5:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	DataAccess
-
-/* 0x1200 - Instruction TLB Miss Exception
- * Nearly the same as above, except we get our information from different
- * registers and bailout to a different point.
- */
-	START_EXCEPTION(0x1200,	ITLBMiss)
-	mtspr	SPRN_SPRG0, r10		/* Save some working registers */
-	mtspr	SPRN_SPRG1, r11
-#ifdef CONFIG_403GCX
-	stw     r12, 0(r0)
-	stw     r9, 4(r0)
-	mfcr    r11
-	mfspr   r12, SPRN_PID
-	stw     r11, 8(r0)
-	stw     r12, 12(r0)
-#else
-	mtspr	SPRN_SPRG4, r12
-	mtspr	SPRN_SPRG5, r9
-	mfcr	r11
-	mfspr	r12, SPRN_PID
-	mtspr	SPRN_SPRG7, r11
-	mtspr	SPRN_SPRG6, r12
-#endif
-	mfspr	r10, SPRN_SRR0		/* Get faulting address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	lis	r11, TASK_SIZE@h
-	cmplw	r10, r11
-	blt+	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	li	r9, 0
-	mtspr	SPRN_PID, r9		/* TLB will have 0 TID */
-	b	4f
-
-	/* Get the PGD for the current thread.
-	 */
-3:
-	mfspr	r11,SPRN_SPRG3
-	lwz	r11,PGDIR(r11)
-4:
-	tophys(r11, r11)
-	rlwimi	r11, r10, 12, 20, 29	/* Create L1 (pgdir/pmd) address */
-	lwz	r12, 0(r11)		/* Get L1 entry */
-	andi.	r9, r12, _PMD_PRESENT	/* Check if it points to a PTE page */
-	beq	2f			/* Bail if no table */
-
-	rlwimi	r12, r10, 22, 20, 29	/* Compute PTE address */
-	lwz	r11, 0(r12)		/* Get Linux PTE */
-	andi.	r9, r11, _PAGE_PRESENT
-	beq	5f
-
-	ori	r11, r11, _PAGE_ACCESSED
-	stw	r11, 0(r12)
-
-	/* Create TLB tag.  This is the faulting address plus a static
-	 * set of bits.  These are size, valid, E, U0.
-	*/
-	li	r12, 0x00c0
-	rlwimi	r10, r12, 0, 20, 31
-
-	b	finish_tlb_load
-
-2:	/* Check for possible large-page pmd entry */
-	rlwinm.	r9, r12, 2, 22, 24
-	beq	5f
-
-	/* Create TLB tag.  This is the faulting address, plus a static
-	 * set of bits (valid, E, U0) plus the size from the PMD.
-	 */
-	ori	r9, r9, 0x40
-	rlwimi	r10, r9, 0, 20, 31
-	mr	r11, r12
-
-	b	finish_tlb_load
-
-5:
-	/* The bailout.  Restore registers to pre-exception conditions
-	 * and call the heavyweights to help us out.
-	 */
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	b	InstructionAccess
-
-	EXCEPTION(0x1300, Trap_13, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1400, Trap_14, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
-#ifdef CONFIG_IBM405_ERR51
-	/* 405GP errata 51 */
-	START_EXCEPTION(0x1700, Trap_17)
-	b DTLBMiss
-#else
-	EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
-#endif
-	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1A00, Trap_1A, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1B00, Trap_1B, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1C00, Trap_1C, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1D00, Trap_1D, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1E00, Trap_1E, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1F00, Trap_1F, unknown_exception, EXC_XFER_EE)
-
-/* Check for a single step debug exception while in an exception
- * handler before state has been saved.  This is to catch the case
- * where an instruction that we are trying to single step causes
- * an exception (eg ITLB/DTLB miss) and thus the first instruction of
- * the exception handler generates a single step debug exception.
- *
- * If we get a debug trap on the first instruction of an exception handler,
- * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
- * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
- * The exception handler was handling a non-critical interrupt, so it will
- * save (and later restore) the MSR via SPRN_SRR1, which will still have
- * the MSR_DE bit set.
- */
-	/* 0x2000 - Debug Exception */
-	START_EXCEPTION(0x2000, DebugTrap)
-	CRITICAL_EXCEPTION_PROLOG
-
-	/*
-	 * If this is a single step or branch-taken exception in an
-	 * exception entry sequence, it was probably meant to apply to
-	 * the code where the exception occurred (since exception entry
-	 * doesn't turn off DE automatically).  We simulate the effect
-	 * of turning off DE on entry to an exception handler by turning
-	 * off DE in the SRR3 value and clearing the debug status.
-	 */
-	mfspr	r10,SPRN_DBSR		/* check single-step/branch taken */
-	andis.	r10,r10,DBSR_IC@h
-	beq+	2f
-
-	andi.	r10,r9,MSR_IR|MSR_PR	/* check supervisor + MMU off */
-	beq	1f			/* branch and fix it up */
-
-	mfspr   r10,SPRN_SRR2		/* Faulting instruction address */
-	cmplwi  r10,0x2100
-	bgt+    2f			/* address above exception vectors */
-
-	/* here it looks like we got an inappropriate debug exception. */
-1:	rlwinm	r9,r9,0,~MSR_DE		/* clear DE in the SRR3 value */
-	lis	r10,DBSR_IC@h		/* clear the IC event */
-	mtspr	SPRN_DBSR,r10
-	/* restore state and get out */
-	lwz	r10,_CCR(r11)
-	lwz	r0,GPR0(r11)
-	lwz	r1,GPR1(r11)
-	mtcrf	0x80,r10
-	mtspr	SPRN_SRR2,r12
-	mtspr	SPRN_SRR3,r9
-	lwz	r9,GPR9(r11)
-	lwz	r12,GPR12(r11)
-	lwz	r10,crit_r10@l(0)
-	lwz	r11,crit_r11@l(0)
-	PPC405_ERR77_SYNC
-	rfci
-	b	.
-
-	/* continue normal handling for a critical exception... */
-2:	mfspr	r4,SPRN_DBSR
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_TEMPLATE(DebugException, 0x2002, \
-		(MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-		NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
-
-/*
- * The other Data TLB exceptions bail out to this point
- * if they can't resolve the lightweight TLB fault.
- */
-DataAccess:
-	NORMAL_EXCEPTION_PROLOG
-	mfspr	r5,SPRN_ESR		/* Grab the ESR, save it, pass arg3 */
-	stw	r5,_ESR(r11)
-	mfspr	r4,SPRN_DEAR		/* Grab the DEAR, save it, pass arg2 */
-	EXC_XFER_EE_LITE(0x300, handle_page_fault)
-
-/* Other PowerPC processors, namely those derived from the 6xx-series
- * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved.
- * However, for the 4xx-series processors these are neither defined nor
- * reserved.
- */
-
-	/* Damn, I came up one instruction too many to fit into the
-	 * exception space :-).  Both the instruction and data TLB
-	 * miss get to this point to load the TLB.
-	 * 	r10 - TLB_TAG value
-	 * 	r11 - Linux PTE
-	 *	r12, r9 - avilable to use
-	 *	PID - loaded with proper value when we get here
-	 *	Upon exit, we reload everything and RFI.
-	 * Actually, it will fit now, but oh well.....a common place
-	 * to load the TLB.
-	 */
-tlb_4xx_index:
-	.long	0
-finish_tlb_load:
-	/* load the next available TLB index.
-	*/
-	lwz	r9, tlb_4xx_index@l(0)
-	addi	r9, r9, 1
-	andi.	r9, r9, (PPC4XX_TLB_SIZE-1)
-	stw	r9, tlb_4xx_index@l(0)
-
-6:
-	/*
-	 * Clear out the software-only bits in the PTE to generate the
-	 * TLB_DATA value.  These are the bottom 2 bits of the RPM, the
-	 * top 3 bits of the zone field, and M.
-	 */
-	li	r12, 0x0ce2
-	andc	r11, r11, r12
-
-	tlbwe	r11, r9, TLB_DATA		/* Load TLB LO */
-	tlbwe	r10, r9, TLB_TAG		/* Load TLB HI */
-
-	/* Done...restore registers and get out of here.
-	*/
-#ifdef CONFIG_403GCX
-	lwz     r12, 12(r0)
-	lwz     r11, 8(r0)
-	mtspr   SPRN_PID, r12
-	mtcr    r11
-	lwz     r9, 4(r0)
-	lwz     r12, 0(r0)
-#else
-	mfspr	r12, SPRN_SPRG6
-	mfspr	r11, SPRN_SPRG7
-	mtspr	SPRN_PID, r12
-	mtcr	r11
-	mfspr	r9, SPRN_SPRG5
-	mfspr	r12, SPRN_SPRG4
-#endif
-	mfspr	r11, SPRN_SPRG1
-	mfspr	r10, SPRN_SPRG0
-	PPC405_ERR77_SYNC
-	rfi			/* Should sync shadow TLBs */
-	b	.		/* prevent prefetch past rfi */
-
-/* extern void giveup_fpu(struct task_struct *prev)
- *
- * The PowerPC 4xx family of processors do not have an FPU, so this just
- * returns.
- */
-_GLOBAL(giveup_fpu)
-	blr
-
-/* This is where the main kernel code starts.
- */
-start_here:
-
-	/* ptr to current */
-	lis	r2,init_task@h
-	ori	r2,r2,init_task@l
-
-	/* ptr to phys current thread */
-	tophys(r4,r2)
-	addi	r4,r4,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
-
-	/* stack */
-	lis	r1,init_thread_union@ha
-	addi	r1,r1,init_thread_union@l
-	li	r0,0
-	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
-
-	bl	early_init	/* We have to do this with MMU on */
-
-/*
- * Decide what sort of machine this is and initialize the MMU.
- */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
-	bl	machine_init
-	bl	MMU_init
-
-/* Go back to running unmapped so we can load up new values
- * and change to using our exception vectors.
- * On the 4xx, all we have to do is invalidate the TLB to clear
- * the old 16M byte TLB mappings.
- */
-	lis	r4,2f@h
-	ori	r4,r4,2f@l
-	tophys(r4,r4)
-	lis	r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@h
-	ori	r3,r3,(MSR_KERNEL & ~(MSR_IR|MSR_DR))@l
-	mtspr	SPRN_SRR0,r4
-	mtspr	SPRN_SRR1,r3
-	rfi
-	b	.		/* prevent prefetch past rfi */
-
-/* Load up the kernel context */
-2:
-	sync			/* Flush to memory before changing TLB */
-	tlbia
-	isync			/* Flush shadow TLBs */
-
-	/* set up the PTE pointers for the Abatron bdiGDB.
-	*/
-	lis	r6, swapper_pg_dir@h
-	ori	r6, r6, swapper_pg_dir@l
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	stw	r5, 0xf0(r0)	/* Must match your Abatron config file */
-	tophys(r5,r5)
-	stw	r6, 0(r5)
-
-/* Now turn on the MMU for real! */
-	lis	r4,MSR_KERNEL@h
-	ori	r4,r4,MSR_KERNEL@l
-	lis	r3,start_kernel@h
-	ori	r3,r3,start_kernel@l
-	mtspr	SPRN_SRR0,r3
-	mtspr	SPRN_SRR1,r4
-	rfi			/* enable MMU and jump to start_kernel */
-	b	.		/* prevent prefetch past rfi */
-
-/* Set up the initial MMU state so we can do the first level of
- * kernel initialization.  This maps the first 16 MBytes of memory 1:1
- * virtual to physical and more importantly sets the cache mode.
- */
-initial_mmu:
-	tlbia			/* Invalidate all TLB entries */
-	isync
-
-	/* We should still be executing code at physical address 0x0000xxxx
-	 * at this point. However, start_here is at virtual address
-	 * 0xC000xxxx. So, set up a TLB mapping to cover this once
-	 * translation is enabled.
-	 */
-
-	lis	r3,KERNELBASE@h		/* Load the kernel virtual address */
-	ori	r3,r3,KERNELBASE@l
-	tophys(r4,r3)			/* Load the kernel physical address */
-
-	iccci	r0,r3			/* Invalidate the i-cache before use */
-
-	/* Load the kernel PID.
-	*/
-	li	r0,0
-	mtspr	SPRN_PID,r0
-	sync
-
-	/* Configure and load two entries into TLB slots 62 and 63.
-	 * In case we are pinning TLBs, these are reserved in by the
-	 * other TLB functions.  If not reserving, then it doesn't
-	 * matter where they are loaded.
-	 */
-	clrrwi	r4,r4,10		/* Mask off the real page number */
-	ori	r4,r4,(TLB_WR | TLB_EX)	/* Set the write and execute bits */
-
-	clrrwi	r3,r3,10		/* Mask off the effective page number */
-	ori	r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M))
-
-        li      r0,63                    /* TLB slot 63 */
-
-	tlbwe	r4,r0,TLB_DATA		/* Load the data portion of the entry */
-	tlbwe	r3,r0,TLB_TAG		/* Load the tag portion of the entry */
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(SERIAL_DEBUG_IO_BASE)
-
-	/* Load a TLB entry for the UART, so that ppc4xx_progress() can use
-	 * the UARTs nice and early.  We use a 4k real==virtual mapping. */
-
-	lis	r3,SERIAL_DEBUG_IO_BASE@h
-	ori	r3,r3,SERIAL_DEBUG_IO_BASE@l
-	mr	r4,r3
-	clrrwi	r4,r4,12
-	ori	r4,r4,(TLB_WR|TLB_I|TLB_M|TLB_G)
-
-	clrrwi	r3,r3,12
-	ori	r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_4K))
-
-	li	r0,0			/* TLB slot 0 */
-	tlbwe	r4,r0,TLB_DATA
-	tlbwe	r3,r0,TLB_TAG
-#endif /* CONFIG_SERIAL_DEBUG_TEXT && SERIAL_DEBUG_IO_BASE */
-
-	isync
-
-	/* Establish the exception vector base
-	*/
-	lis	r4,KERNELBASE@h		/* EVPR only uses the high 16-bits */
-	tophys(r0,r4)			/* Use the physical address */
-	mtspr	SPRN_EVPR,r0
-
-	blr
-
-_GLOBAL(abort)
-        mfspr   r13,SPRN_DBCR0
-        oris    r13,r13,DBCR0_RST_SYSTEM@h
-        mtspr   SPRN_DBCR0,r13
-
-_GLOBAL(set_context)
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Context switch the PTE pointer for the Abatron BDI2000.
-	 * The PGDIR is the second parameter.
-	 */
-	lis	r5, KERNELBASE@h
-	lwz	r5, 0xf0(r5)
-	stw	r4, 0x4(r5)
-#endif
-	sync
-	mtspr	SPRN_PID,r3
-	isync				/* Need an isync to flush shadow */
-					/* TLBs after changing PID */
-	blr
-
-/* We put a few things here that have to be page-aligned. This stuff
- * goes at the beginning of the data segment, which is page-aligned.
- */
-	.data
-	.align	12
-	.globl	sdata
-sdata:
-	.globl	empty_zero_page
-empty_zero_page:
-	.space	4096
-	.globl	swapper_pg_dir
-swapper_pg_dir:
-	.space	4096
-
-
-/* Stack for handling critical exceptions from kernel mode */
-	.section .bss
-        .align 12
-exception_stack_bottom:
-	.space	4096
-critical_stack_top:
-	.globl	exception_stack_top
-exception_stack_top:
-
-/* This space gets a copy of optional info passed to us by the bootstrap
- * which is used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
-	.globl	cmd_line
-cmd_line:
-	.space	512
-
-/* Room for two PTE pointers, usually the kernel and current user pointers
- * to their respective root page table.
- */
-abatron_pteptrs:
-	.space	8
diff --git a/arch/ppc/kernel/head_8xx.S b/arch/ppc/kernel/head_8xx.S
deleted file mode 100644
index 321bda2de2cb..000000000000
--- a/arch/ppc/kernel/head_8xx.S
+++ /dev/null
@@ -1,959 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
- *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
- *  Low-level exception handlers and MMU support
- *  rewritten by Paul Mackerras.
- *    Copyright (C) 1996 Paul Mackerras.
- *  MPC8xx modifications by Dan Malek
- *    Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
- *
- *  This file contains low-level support and setup for PowerPC 8xx
- *  embedded processors, including trap and interrupt dispatch.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-#include <asm/pgtable.h>
-#include <asm/cputable.h>
-#include <asm/thread_info.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-
-/* Macro to make the code more readable. */
-#ifdef CONFIG_8xx_CPU6
-#define DO_8xx_CPU6(val, reg)	\
-	li	reg, val;	\
-	stw	reg, 12(r0);	\
-	lwz	reg, 12(r0);
-#else
-#define DO_8xx_CPU6(val, reg)
-#endif
-	.text
-	.globl	_stext
-_stext:
-	.text
-	.globl	_start
-_start:
-
-/* MPC8xx
- * This port was done on an MBX board with an 860.  Right now I only
- * support an ELF compressed (zImage) boot from EPPC-Bug because the
- * code there loads up some registers before calling us:
- *   r3: ptr to board info data
- *   r4: initrd_start or if no initrd then 0
- *   r5: initrd_end - unused if r4 is 0
- *   r6: Start of command line string
- *   r7: End of command line string
- *
- * I decided to use conditional compilation instead of checking PVR and
- * adding more processor specific branches around code I don't need.
- * Since this is an embedded processor, I also appreciate any memory
- * savings I can get.
- *
- * The MPC8xx does not have any BATs, but it supports large page sizes.
- * We first initialize the MMU to support 8M byte pages, then load one
- * entry into each of the instruction and data TLBs to map the first
- * 8M 1:1.  I also mapped an additional I/O space 1:1 so we can get to
- * the "internal" processor registers before MMU_init is called.
- *
- * The TLB code currently contains a major hack.  Since I use the condition
- * code register, I have to save and restore it.  I am out of registers, so
- * I just store it in memory location 0 (the TLB handlers are not reentrant).
- * To avoid making any decisions, I need to use the "segment" valid bit
- * in the first level table, but that would require many changes to the
- * Linux page directory/table functions that I don't want to do right now.
- *
- * I used to use SPRG2 for a temporary register in the TLB handler, but it
- * has since been put to other uses.  I now use a hack to save a register
- * and the CCR at memory location 0.....Someday I'll fix this.....
- *	-- Dan
- */
-	.globl	__start
-__start:
-	mr	r31,r3			/* save parameters */
-	mr	r30,r4
-	mr	r29,r5
-	mr	r28,r6
-	mr	r27,r7
-
-	/* We have to turn on the MMU right away so we get cache modes
-	 * set correctly.
-	 */
-	bl	initial_mmu
-
-/* We now have the lower 8 Meg mapped into TLB entries, and the caches
- * ready to work.
- */
-
-turn_on_mmu:
-	mfmsr	r0
-	ori	r0,r0,MSR_DR|MSR_IR
-	mtspr	SPRN_SRR1,r0
-	lis	r0,start_here@h
-	ori	r0,r0,start_here@l
-	mtspr	SPRN_SRR0,r0
-	SYNC
-	rfi				/* enables MMU */
-
-/*
- * Exception entry code.  This code runs with address translation
- * turned off, i.e. using physical addresses.
- * We assume sprg3 has the physical address of the current
- * task's thread_struct.
- */
-#define EXCEPTION_PROLOG	\
-	mtspr	SPRN_SPRG0,r10;	\
-	mtspr	SPRN_SPRG1,r11;	\
-	mfcr	r10;		\
-	EXCEPTION_PROLOG_1;	\
-	EXCEPTION_PROLOG_2
-
-#define EXCEPTION_PROLOG_1	\
-	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel */ \
-	andi.	r11,r11,MSR_PR;	\
-	tophys(r11,r1);			/* use tophys(r1) if kernel */ \
-	beq	1f;		\
-	mfspr	r11,SPRN_SPRG3;	\
-	lwz	r11,THREAD_INFO-THREAD(r11);	\
-	addi	r11,r11,THREAD_SIZE;	\
-	tophys(r11,r11);	\
-1:	subi	r11,r11,INT_FRAME_SIZE	/* alloc exc. frame */
-
-
-#define EXCEPTION_PROLOG_2	\
-	CLR_TOP32(r11);		\
-	stw	r10,_CCR(r11);		/* save registers */ \
-	stw	r12,GPR12(r11);	\
-	stw	r9,GPR9(r11);	\
-	mfspr	r10,SPRN_SPRG0;	\
-	stw	r10,GPR10(r11);	\
-	mfspr	r12,SPRN_SPRG1;	\
-	stw	r12,GPR11(r11);	\
-	mflr	r10;		\
-	stw	r10,_LINK(r11);	\
-	mfspr	r12,SPRN_SRR0;	\
-	mfspr	r9,SPRN_SRR1;	\
-	stw	r1,GPR1(r11);	\
-	stw	r1,0(r11);	\
-	tovirt(r1,r11);			/* set new kernel sp */	\
-	li	r10,MSR_KERNEL & ~(MSR_IR|MSR_DR); /* can take exceptions */ \
-	MTMSRD(r10);			/* (except for mach check in rtas) */ \
-	stw	r0,GPR0(r11);	\
-	SAVE_4GPRS(3, r11);	\
-	SAVE_2GPRS(7, r11)
-
-/*
- * Note: code which follows this uses cr0.eq (set if from kernel),
- * r11, r12 (SRR0), and r9 (SRR1).
- *
- * Note2: once we have set r1 we are in a position to take exceptions
- * again, and we could thus set MSR:RI at that point.
- */
-
-/*
- * Exception vectors.
- */
-#define EXCEPTION(n, label, hdlr, xfer)		\
-	. = n;					\
-label:						\
-	EXCEPTION_PROLOG;			\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;	\
-	xfer(n, hdlr)
-
-#define EXC_XFER_TEMPLATE(n, hdlr, trap, copyee, tfer, ret)	\
-	li	r10,trap;					\
-	stw	r10,TRAP(r11);					\
-	li	r10,MSR_KERNEL;					\
-	copyee(r10, r9);					\
-	bl	tfer;						\
-i##n:								\
-	.long	hdlr;						\
-	.long	ret
-
-#define COPY_EE(d, s)		rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n, NOCOPY, transfer_to_handler_full,	\
-			  ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n+1, NOCOPY, transfer_to_handler, \
-			  ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(n, hdlr, n, COPY_EE, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr)	\
-	EXC_XFER_TEMPLATE(n, hdlr, n+1, COPY_EE, transfer_to_handler, \
-			  ret_from_except)
-
-/* System reset */
-	EXCEPTION(0x100, Reset, unknown_exception, EXC_XFER_STD)
-
-/* Machine check */
-	. = 0x200
-MachineCheck:
-	EXCEPTION_PROLOG
-	mfspr r4,SPRN_DAR
-	stw r4,_DAR(r11)
-	mfspr r5,SPRN_DSISR
-	stw r5,_DSISR(r11)
-	addi r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_STD(0x200, machine_check_exception)
-
-/* Data access exception.
- * This is "never generated" by the MPC8xx.  We jump to it for other
- * translation errors.
- */
-	. = 0x300
-DataAccess:
-	EXCEPTION_PROLOG
-	mfspr	r10,SPRN_DSISR
-	stw	r10,_DSISR(r11)
-	mr	r5,r10
-	mfspr	r4,SPRN_DAR
-	EXC_XFER_EE_LITE(0x300, handle_page_fault)
-
-/* Instruction access exception.
- * This is "never generated" by the MPC8xx.  We jump to it for other
- * translation errors.
- */
-	. = 0x400
-InstructionAccess:
-	EXCEPTION_PROLOG
-	mr	r4,r12
-	mr	r5,r9
-	EXC_XFER_EE_LITE(0x400, handle_page_fault)
-
-/* External interrupt */
-	EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE)
-
-/* Alignment exception */
-	. = 0x600
-Alignment:
-	EXCEPTION_PROLOG
-	mfspr	r4,SPRN_DAR
-	stw	r4,_DAR(r11)
-	mfspr	r5,SPRN_DSISR
-	stw	r5,_DSISR(r11)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	EXC_XFER_EE(0x600, alignment_exception)
-
-/* Program check exception */
-	EXCEPTION(0x700, ProgramCheck, program_check_exception, EXC_XFER_STD)
-
-/* No FPU on MPC8xx.  This exception is not supposed to happen.
-*/
-	EXCEPTION(0x800, FPUnavailable, unknown_exception, EXC_XFER_STD)
-
-/* Decrementer */
-	EXCEPTION(0x900, Decrementer, timer_interrupt, EXC_XFER_LITE)
-
-	EXCEPTION(0xa00, Trap_0a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0xb00, Trap_0b, unknown_exception, EXC_XFER_EE)
-
-/* System call */
-	. = 0xc00
-SystemCall:
-	EXCEPTION_PROLOG
-	EXC_XFER_EE_LITE(0xc00, DoSyscall)
-
-/* Single step - not used on 601 */
-	EXCEPTION(0xd00, SingleStep, single_step_exception, EXC_XFER_STD)
-	EXCEPTION(0xe00, Trap_0e, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0xf00, Trap_0f, unknown_exception, EXC_XFER_EE)
-
-/* On the MPC8xx, this is a software emulation interrupt.  It occurs
- * for all unimplemented and illegal instructions.
- */
-	EXCEPTION(0x1000, SoftEmu, SoftwareEmulation, EXC_XFER_STD)
-
-	. = 0x1100
-/*
- * For the MPC8xx, this is a software tablewalk to load the instruction
- * TLB.  It is modelled after the example in the Motorola manual.  The task
- * switch loads the M_TWB register with the pointer to the first level table.
- * If we discover there is no second level table (value is zero) or if there
- * is an invalid pte, we load that into the TLB, which causes another fault
- * into the TLB Error interrupt where we can handle such problems.
- * We have to use the MD_xxx registers for the tablewalk because the
- * equivalent MI_xxx registers only perform the attribute functions.
- */
-InstructionTLBMiss:
-#ifdef CONFIG_8xx_CPU6
-	stw	r3, 8(r0)
-#endif
-	DO_8xx_CPU6(0x3f80, r3)
-	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
-	mfcr	r10
-	stw	r10, 0(r0)
-	stw	r11, 4(r0)
-	mfspr	r10, SPRN_SRR0	/* Get effective address of fault */
-	DO_8xx_CPU6(0x3780, r3)
-	mtspr	SPRN_MD_EPN, r10	/* Have to use MD_EPN for walk, MI_EPN can't */
-	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	andi.	r11, r10, 0x0800	/* Address >= 0x80000000 */
-	beq	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	rlwimi	r10, r11, 0, 2, 19
-3:
-	lwz	r11, 0(r10)	/* Get the level 1 entry */
-	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
-	beq	2f		/* If zero, don't try to find a pte */
-
-	/* We have a pte table, so load the MI_TWC with the attributes
-	 * for this "segment."
-	 */
-	ori	r11,r11,1		/* Set valid bit */
-	DO_8xx_CPU6(0x2b80, r3)
-	mtspr	SPRN_MI_TWC, r11	/* Set segment attributes */
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11	/* Load pte table base address */
-	mfspr	r11, SPRN_MD_TWC	/* ....and get the pte address */
-	lwz	r10, 0(r11)	/* Get the pte */
-
-#ifdef CONFIG_SWAP
-	/* do not set the _PAGE_ACCESSED bit of a non-present page */
-	andi.	r11, r10, _PAGE_PRESENT
-	beq	4f
-	ori	r10, r10, _PAGE_ACCESSED
-	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
-	stw	r10, 0(r11)
-4:
-#else
-	ori	r10, r10, _PAGE_ACCESSED
-	stw	r10, 0(r11)
-#endif
-
-	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 21, 22 and 28 must be clear.
-	 * Software indicator bits 24, 25, 26, and 27 must be
-	 * set.  All other Linux PTE bits control the behavior
-	 * of the MMU.
-	 */
-2:	li	r11, 0x00f0
-	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
-	DO_8xx_CPU6(0x2d80, r3)
-	mtspr	SPRN_MI_RPN, r10	/* Update TLB entry */
-
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
-	lwz	r11, 0(r0)
-	mtcr	r11
-	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
-	lwz	r3, 8(r0)
-#endif
-	rfi
-
-	. = 0x1200
-DataStoreTLBMiss:
-	stw	r3, 8(r0)
-	DO_8xx_CPU6(0x3f80, r3)
-	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
-	mfcr	r10
-	stw	r10, 0(r0)
-	stw	r11, 4(r0)
-	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	andi.	r11, r10, 0x0800
-	beq	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	rlwimi	r10, r11, 0, 2, 19
-	stw	r12, 16(r0)
-	b LoadLargeDTLB
-3:
-	lwz	r11, 0(r10)	/* Get the level 1 entry */
-	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
-	beq	2f		/* If zero, don't try to find a pte */
-
-	/* We have a pte table, so load fetch the pte from the table.
-	 */
-	ori	r11, r11, 1	/* Set valid bit in physical L2 page */
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11	/* Load pte table base address */
-	mfspr	r10, SPRN_MD_TWC	/* ....and get the pte address */
-	lwz	r10, 0(r10)	/* Get the pte */
-
-	/* Insert the Guarded flag into the TWC from the Linux PTE.
-	 * It is bit 27 of both the Linux PTE and the TWC (at least
-	 * I got that right :-).  It will be better when we can put
-	 * this into the Linux pgd/pmd and load it in the operation
-	 * above.
-	 */
-	rlwimi	r11, r10, 0, 27, 27
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11
-
-#ifdef CONFIG_SWAP
-	/* do not set the _PAGE_ACCESSED bit of a non-present page */
-	andi.	r11, r10, _PAGE_PRESENT
-	beq	4f
-	ori	r10, r10, _PAGE_ACCESSED
-4:
-	/* and update pte in table */
-#else
-	ori	r10, r10, _PAGE_ACCESSED
-#endif
-	mfspr	r11, SPRN_MD_TWC	/* get the pte address again */
-	stw	r10, 0(r11)
-
-	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 21, 22 and 28 must be clear.
-	 * Software indicator bits 24, 25, 26, and 27 must be
-	 * set.  All other Linux PTE bits control the behavior
-	 * of the MMU.
-	 */
-2:	li	r11, 0x00f0
-	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
-	DO_8xx_CPU6(0x3d80, r3)
-	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
-
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
-	lwz	r11, 0(r0)
-	mtcr	r11
-	lwz	r11, 4(r0)
-	lwz	r3, 8(r0)
-	rfi
-
-/* This is an instruction TLB error on the MPC8xx.  This could be due
- * to many reasons, such as executing guarded memory or illegal instruction
- * addresses.  There is nothing to do but handle a big time error fault.
- */
-	. = 0x1300
-InstructionTLBError:
-	b	InstructionAccess
-
-LoadLargeDTLB:
-	li	r12, 0
-	lwz	r11, 0(r10)	/* Get the level 1 entry */
-	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
-	beq	3f		/* If zero, don't try to find a pte */
-
-	/* We have a pte table, so load fetch the pte from the table.
-	 */
-	ori	r11, r11, 1	/* Set valid bit in physical L2 page */
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11	/* Load pte table base address */
-	mfspr	r10, SPRN_MD_TWC	/* ....and get the pte address */
-	lwz	r10, 0(r10)	/* Get the pte */
-
-	/* Insert the Guarded flag into the TWC from the Linux PTE.
-	 * It is bit 27 of both the Linux PTE and the TWC (at least
-	 * I got that right :-).  It will be better when we can put
-	 * this into the Linux pgd/pmd and load it in the operation
-	 * above.
-	 */
-	rlwimi	r11, r10, 0, 27, 27
-
-	rlwimi  r12, r10, 0, 0, 9	/* extract phys. addr */
-	mfspr	r3, SPRN_MD_EPN
-	rlwinm	r3, r3, 0, 0, 9		/* extract virtual address */
-	tophys(r3, r3)
-	cmpw	r3, r12			/* only use 8M page if it is a direct 
-					   kernel mapping */
-	bne	1f
-	ori     r11, r11, MD_PS8MEG
-	li	r12, 1
-	b	2f
-1:
-	li	r12, 0		/* can't use 8MB TLB, so zero r12. */
-2:
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11
-
-	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 21, 22 and 28 must be clear.
-	 * Software indicator bits 24, 25, 26, and 27 must be
-	 * set.  All other Linux PTE bits control the behavior
-	 * of the MMU.
-	 */
-3:	li	r11, 0x00f0
-	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
-	cmpwi   r12, 1
-	bne 4f
-	ori     r10, r10, 0x8
-
-	mfspr	r12, SPRN_MD_EPN
-	lis	r3, 0xff80		/* 10-19 must be clear for 8MB TLB */
-	ori	r3, r3, 0x0fff
-	and	r12, r3, r12
-	DO_8xx_CPU6(0x3780, r3)
-	mtspr	SPRN_MD_EPN, r12
-
-	lis	r3, 0xff80		/* 10-19 must be clear for 8MB TLB */
-	ori	r3, r3, 0x0fff
-	and	r10, r3, r10
-4:
-	DO_8xx_CPU6(0x3d80, r3)
-	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
-
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
-	lwz	r11, 0(r0)
-	mtcr	r11
-	lwz	r11, 4(r0)
-
-	lwz	r12, 16(r0)
-	lwz	r3, 8(r0)
-	rfi
-
-/* This is the data TLB error on the MPC8xx.  This could be due to
- * many reasons, including a dirty update to a pte.  We can catch that
- * one here, but anything else is an error.  First, we track down the
- * Linux pte.  If it is valid, write access is allowed, but the
- * page dirty bit is not set, we will set it and reload the TLB.  For
- * any other case, we bail out to a higher level function that can
- * handle it.
- */
-	. = 0x1400
-DataTLBError:
-#ifdef CONFIG_8xx_CPU6
-	stw	r3, 8(r0)
-#endif
-	DO_8xx_CPU6(0x3f80, r3)
-	mtspr	SPRN_M_TW, r10	/* Save a couple of working registers */
-	mfcr	r10
-	stw	r10, 0(r0)
-	stw	r11, 4(r0)
-
-	/* First, make sure this was a store operation.
-	*/
-	mfspr	r10, SPRN_DSISR
-	andis.	r11, r10, 0x0200	/* If set, indicates store op */
-	beq	2f
-
-	/* The EA of a data TLB miss is automatically stored in the MD_EPN
-	 * register.  The EA of a data TLB error is automatically stored in
-	 * the DAR, but not the MD_EPN register.  We must copy the 20 most
-	 * significant bits of the EA from the DAR to MD_EPN before we
-	 * start walking the page tables.  We also need to copy the CASID
-	 * value from the M_CASID register.
-	 * Addendum:  The EA of a data TLB error is _supposed_ to be stored
-	 * in DAR, but it seems that this doesn't happen in some cases, such
-	 * as when the error is due to a dcbi instruction to a page with a
-	 * TLB that doesn't have the changed bit set.  In such cases, there
-	 * does not appear to be any way  to recover the EA of the error
-	 * since it is neither in DAR nor MD_EPN.  As a workaround, the
-	 * _PAGE_HWWRITE bit is set for all kernel data pages when the PTEs
-	 * are initialized in mapin_ram().  This will avoid the problem,
-	 * assuming we only use the dcbi instruction on kernel addresses.
-	 */
-	mfspr	r10, SPRN_DAR
-	rlwinm	r11, r10, 0, 0, 19
-	ori	r11, r11, MD_EVALID
-	mfspr	r10, SPRN_M_CASID
-	rlwimi	r11, r10, 0, 28, 31
-	DO_8xx_CPU6(0x3780, r3)
-	mtspr	SPRN_MD_EPN, r11
-
-	mfspr	r10, SPRN_M_TWB	/* Get level 1 table entry address */
-
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	andi.	r11, r10, 0x0800
-	beq	3f
-	lis	r11, swapper_pg_dir@h
-	ori	r11, r11, swapper_pg_dir@l
-	rlwimi	r10, r11, 0, 2, 19
-3:
-	lwz	r11, 0(r10)	/* Get the level 1 entry */
-	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
-	beq	2f		/* If zero, bail */
-
-	/* We have a pte table, so fetch the pte from the table.
-	 */
-	ori	r11, r11, 1		/* Set valid bit in physical L2 page */
-	DO_8xx_CPU6(0x3b80, r3)
-	mtspr	SPRN_MD_TWC, r11		/* Load pte table base address */
-	mfspr	r11, SPRN_MD_TWC		/* ....and get the pte address */
-	lwz	r10, 0(r11)		/* Get the pte */
-
-	andi.	r11, r10, _PAGE_RW	/* Is it writeable? */
-	beq	2f			/* Bail out if not */
-
-	/* Update 'changed', among others.
-	*/
-#ifdef CONFIG_SWAP
-	ori	r10, r10, _PAGE_DIRTY|_PAGE_HWWRITE
-	/* do not set the _PAGE_ACCESSED bit of a non-present page */
-	andi.	r11, r10, _PAGE_PRESENT
-	beq	4f
-	ori	r10, r10, _PAGE_ACCESSED
-4:
-#else
-	ori	r10, r10, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE
-#endif
-	mfspr	r11, SPRN_MD_TWC		/* Get pte address again */
-	stw	r10, 0(r11)		/* and update pte in table */
-
-	/* The Linux PTE won't go exactly into the MMU TLB.
-	 * Software indicator bits 21, 22 and 28 must be clear.
-	 * Software indicator bits 24, 25, 26, and 27 must be
-	 * set.  All other Linux PTE bits control the behavior
-	 * of the MMU.
-	 */
-	li	r11, 0x00f0
-	rlwimi	r10, r11, 0, 24, 28	/* Set 24-27, clear 28 */
-	DO_8xx_CPU6(0x3d80, r3)
-	mtspr	SPRN_MD_RPN, r10	/* Update TLB entry */
-
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
-	lwz	r11, 0(r0)
-	mtcr	r11
-	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
-	lwz	r3, 8(r0)
-#endif
-	rfi
-2:
-	mfspr	r10, SPRN_M_TW	/* Restore registers */
-	lwz	r11, 0(r0)
-	mtcr	r11
-	lwz	r11, 4(r0)
-#ifdef CONFIG_8xx_CPU6
-	lwz	r3, 8(r0)
-#endif
-	b	DataAccess
-
-	EXCEPTION(0x1500, Trap_15, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1600, Trap_16, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1700, Trap_17, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1800, Trap_18, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1900, Trap_19, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1a00, Trap_1a, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1b00, Trap_1b, unknown_exception, EXC_XFER_EE)
-
-/* On the MPC8xx, these next four traps are used for development
- * support of breakpoints and such.  Someday I will get around to
- * using them.
- */
-	EXCEPTION(0x1c00, Trap_1c, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1d00, Trap_1d, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1e00, Trap_1e, unknown_exception, EXC_XFER_EE)
-	EXCEPTION(0x1f00, Trap_1f, unknown_exception, EXC_XFER_EE)
-
-	. = 0x2000
-
-	.globl	giveup_fpu
-giveup_fpu:
-	blr
-
-/*
- * This is where the main kernel code starts.
- */
-start_here:
-	/* ptr to current */
-	lis	r2,init_task@h
-	ori	r2,r2,init_task@l
-
-	/* ptr to phys current thread */
-	tophys(r4,r2)
-	addi	r4,r4,THREAD	/* init task's THREAD */
-	mtspr	SPRN_SPRG3,r4
-	li	r3,0
-	mtspr	SPRN_SPRG2,r3	/* 0 => r1 has kernel sp */
-
-	/* stack */
-	lis	r1,init_thread_union@ha
-	addi	r1,r1,init_thread_union@l
-	li	r0,0
-	stwu	r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
-
-	bl	early_init	/* We have to do this with MMU on */
-
-/*
- * Decide what sort of machine this is and initialize the MMU.
- */
-	mr	r3,r31
-	mr	r4,r30
-	mr	r5,r29
-	mr	r6,r28
-	mr	r7,r27
-	bl	machine_init
-	bl	MMU_init
-
-/*
- * Go back to running unmapped so we can load up new values
- * and change to using our exception vectors.
- * On the 8xx, all we have to do is invalidate the TLB to clear
- * the old 8M byte TLB mappings and load the page table base register.
- */
-	/* The right way to do this would be to track it down through
-	 * init's THREAD like the context switch code does, but this is
-	 * easier......until someone changes init's static structures.
-	 */
-	lis	r6, swapper_pg_dir@h
-	ori	r6, r6, swapper_pg_dir@l
-	tophys(r6,r6)
-#ifdef CONFIG_8xx_CPU6
-	lis	r4, cpu6_errata_word@h
-	ori	r4, r4, cpu6_errata_word@l
-	li	r3, 0x3980
-	stw	r3, 12(r4)
-	lwz	r3, 12(r4)
-#endif
-	mtspr	SPRN_M_TWB, r6
-	lis	r4,2f@h
-	ori	r4,r4,2f@l
-	tophys(r4,r4)
-	li	r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
-	mtspr	SPRN_SRR0,r4
-	mtspr	SPRN_SRR1,r3
-	rfi
-/* Load up the kernel context */
-2:
-	SYNC			/* Force all PTE updates to finish */
-	tlbia			/* Clear all TLB entries */
-	sync			/* wait for tlbia/tlbie to finish */
-	TLBSYNC			/* ... on all CPUs */
-
-	/* set up the PTE pointers for the Abatron bdiGDB.
-	*/
-	tovirt(r6,r6)
-	lis	r5, abatron_pteptrs@h
-	ori	r5, r5, abatron_pteptrs@l
-	stw	r5, 0xf0(r0)	/* Must match your Abatron config file */
-	tophys(r5,r5)
-	stw	r6, 0(r5)
-
-/* Now turn on the MMU for real! */
-	li	r4,MSR_KERNEL
-	lis	r3,start_kernel@h
-	ori	r3,r3,start_kernel@l
-	mtspr	SPRN_SRR0,r3
-	mtspr	SPRN_SRR1,r4
-	rfi			/* enable MMU and jump to start_kernel */
-
-/* Set up the initial MMU state so we can do the first level of
- * kernel initialization.  This maps the first 8 MBytes of memory 1:1
- * virtual to physical.  Also, set the cache mode since that is defined
- * by TLB entries and perform any additional mapping (like of the IMMR).
- * If configured to pin some TLBs, we pin the first 8 Mbytes of kernel,
- * 24 Mbytes of data, and the 8M IMMR space.  Anything not covered by
- * these mappings is mapped by page tables.
- */
-initial_mmu:
-	tlbia			/* Invalidate all TLB entries */
-#ifdef CONFIG_PIN_TLB
-	lis	r8, MI_RSV4I@h
-	ori	r8, r8, 0x1c00
-#else
-	li	r8, 0
-#endif
-	mtspr	SPRN_MI_CTR, r8	/* Set instruction MMU control */
-
-#ifdef CONFIG_PIN_TLB
-	lis	r10, (MD_RSV4I | MD_RESETVAL)@h
-	ori	r10, r10, 0x1c00
-	mr	r8, r10
-#else
-	lis	r10, MD_RESETVAL@h
-#endif
-#ifndef CONFIG_8xx_COPYBACK
-	oris	r10, r10, MD_WTDEF@h
-#endif
-	mtspr	SPRN_MD_CTR, r10	/* Set data TLB control */
-
-	/* Now map the lower 8 Meg into the TLBs.  For this quick hack,
-	 * we can load the instruction and data TLB registers with the
-	 * same values.
-	 */
-	lis	r8, KERNELBASE@h	/* Create vaddr for TLB */
-	ori	r8, r8, MI_EVALID	/* Mark it valid */
-	mtspr	SPRN_MI_EPN, r8
-	mtspr	SPRN_MD_EPN, r8
-	li	r8, MI_PS8MEG		/* Set 8M byte page */
-	ori	r8, r8, MI_SVALID	/* Make it valid */
-	mtspr	SPRN_MI_TWC, r8
-	mtspr	SPRN_MD_TWC, r8
-	li	r8, MI_BOOTINIT		/* Create RPN for address 0 */
-	mtspr	SPRN_MI_RPN, r8		/* Store TLB entry */
-	mtspr	SPRN_MD_RPN, r8
-	lis	r8, MI_Kp@h		/* Set the protection mode */
-	mtspr	SPRN_MI_AP, r8
-	mtspr	SPRN_MD_AP, r8
-
-	/* Map another 8 MByte at the IMMR to get the processor
-	 * internal registers (among other things).
-	 */
-#ifdef CONFIG_PIN_TLB
-	addi	r10, r10, 0x0100
-	mtspr	SPRN_MD_CTR, r10
-#endif
-	mfspr	r9, 638			/* Get current IMMR */
-	andis.	r9, r9, 0xff80		/* Get 8Mbyte boundary */
-
-	mr	r8, r9			/* Create vaddr for TLB */
-	ori	r8, r8, MD_EVALID	/* Mark it valid */
-	mtspr	SPRN_MD_EPN, r8
-	li	r8, MD_PS8MEG		/* Set 8M byte page */
-	ori	r8, r8, MD_SVALID	/* Make it valid */
-	mtspr	SPRN_MD_TWC, r8
-	mr	r8, r9			/* Create paddr for TLB */
-	ori	r8, r8, MI_BOOTINIT|0x2 /* Inhibit cache -- Cort */
-	mtspr	SPRN_MD_RPN, r8
-
-#ifdef CONFIG_PIN_TLB
-	/* Map two more 8M kernel data pages.
-	*/
-	addi	r10, r10, 0x0100
-	mtspr	SPRN_MD_CTR, r10
-
-	lis	r8, KERNELBASE@h	/* Create vaddr for TLB */
-	addis	r8, r8, 0x0080		/* Add 8M */
-	ori	r8, r8, MI_EVALID	/* Mark it valid */
-	mtspr	SPRN_MD_EPN, r8
-	li	r9, MI_PS8MEG		/* Set 8M byte page */
-	ori	r9, r9, MI_SVALID	/* Make it valid */
-	mtspr	SPRN_MD_TWC, r9
-	li	r11, MI_BOOTINIT	/* Create RPN for address 0 */
-	addis	r11, r11, 0x0080	/* Add 8M */
-	mtspr	SPRN_MD_RPN, r11
-
-	addi	r10, r10, 0x0100
-	mtspr	SPRN_MD_CTR, r10
-
-	addis	r8, r8, 0x0080		/* Add 8M */
-	mtspr	SPRN_MD_EPN, r8
-	mtspr	SPRN_MD_TWC, r9
-	addis	r11, r11, 0x0080	/* Add 8M */
-	mtspr	SPRN_MD_RPN, r11
-#endif
-
-	/* Since the cache is enabled according to the information we
-	 * just loaded into the TLB, invalidate and enable the caches here.
-	 * We should probably check/set other modes....later.
-	 */
-	lis	r8, IDC_INVALL@h
-	mtspr	SPRN_IC_CST, r8
-	mtspr	SPRN_DC_CST, r8
-	lis	r8, IDC_ENABLE@h
-	mtspr	SPRN_IC_CST, r8
-#ifdef CONFIG_8xx_COPYBACK
-	mtspr	SPRN_DC_CST, r8
-#else
-	/* For a debug option, I left this here to easily enable
-	 * the write through cache mode
-	 */
-	lis	r8, DC_SFWT@h
-	mtspr	SPRN_DC_CST, r8
-	lis	r8, IDC_ENABLE@h
-	mtspr	SPRN_DC_CST, r8
-#endif
-	blr
-
-
-/*
- * Set up to use a given MMU context.
- * r3 is context number, r4 is PGD pointer.
- *
- * We place the physical address of the new task page directory loaded
- * into the MMU base register, and set the ASID compare register with
- * the new "context."
- */
-_GLOBAL(set_context)
-
-#ifdef CONFIG_BDI_SWITCH
-	/* Context switch the PTE pointer for the Abatron BDI2000.
-	 * The PGDIR is passed as second argument.
-	 */
-	lis	r5, KERNELBASE@h
-	lwz	r5, 0xf0(r5)
-	stw	r4, 0x4(r5)
-#endif
-
-#ifdef CONFIG_8xx_CPU6
-	lis	r6, cpu6_errata_word@h
-	ori	r6, r6, cpu6_errata_word@l
-	tophys	(r4, r4)
-	li	r7, 0x3980
-	stw	r7, 12(r6)
-	lwz	r7, 12(r6)
-        mtspr   SPRN_M_TWB, r4               /* Update MMU base address */
-	li	r7, 0x3380
-	stw	r7, 12(r6)
-	lwz	r7, 12(r6)
-        mtspr   SPRN_M_CASID, r3             /* Update context */
-#else
-        mtspr   SPRN_M_CASID,r3		/* Update context */
-	tophys	(r4, r4)
-	mtspr	SPRN_M_TWB, r4		/* and pgd */
-#endif
-	SYNC
-	blr
-
-#ifdef CONFIG_8xx_CPU6
-/* It's here because it is unique to the 8xx.
- * It is important we get called with interrupts disabled.  I used to
- * do that, but it appears that all code that calls this already had
- * interrupt disabled.
- */
-	.globl	set_dec_cpu6
-set_dec_cpu6:
-	lis	r7, cpu6_errata_word@h
-	ori	r7, r7, cpu6_errata_word@l
-	li	r4, 0x2c00
-	stw	r4, 8(r7)
-	lwz	r4, 8(r7)
-        mtspr   22, r3		/* Update Decrementer */
-	SYNC
-	blr
-#endif
-
-/*
- * We put a few things here that have to be page-aligned.
- * This stuff goes at the beginning of the data segment,
- * which is page-aligned.
- */
-	.data
-	.globl	sdata
-sdata:
-	.globl	empty_zero_page
-empty_zero_page:
-	.space	4096
-
-	.globl	swapper_pg_dir
-swapper_pg_dir:
-	.space	4096
-
-/*
- * This space gets a copy of optional info passed to us by the bootstrap
- * Used to pass parameters into the kernel like root=/dev/sda1, etc.
- */
-	.globl	cmd_line
-cmd_line:
-	.space	512
-
-/* Room for two PTE table poiners, usually the kernel and current user
- * pointer to their respective root page table (pgdir).
- */
-abatron_pteptrs:
-	.space	8
-
-#ifdef CONFIG_8xx_CPU6
-	.globl	cpu6_errata_word
-cpu6_errata_word:
-	.space	16
-#endif
-
diff --git a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h
deleted file mode 100644
index 166d597b6db2..000000000000
--- a/arch/ppc/kernel/head_booke.h
+++ /dev/null
@@ -1,308 +0,0 @@
-#ifndef __HEAD_BOOKE_H__
-#define __HEAD_BOOKE_H__
-
-/*
- * Macros used for common Book-e exception handling
- */
-
-#define SET_IVOR(vector_number, vector_label)		\
-		li	r26,vector_label@l; 		\
-		mtspr	SPRN_IVOR##vector_number,r26;	\
-		sync
-
-#define NORMAL_EXCEPTION_PROLOG						     \
-	mtspr	SPRN_SPRG0,r10;		/* save two registers to work with */\
-	mtspr	SPRN_SPRG1,r11;						     \
-	mtspr	SPRN_SPRG4W,r1;						     \
-	mfcr	r10;			/* save CR in r10 for now	   */\
-	mfspr	r11,SPRN_SRR1;		/* check whether user or kernel    */\
-	andi.	r11,r11,MSR_PR;						     \
-	beq	1f;							     \
-	mfspr	r1,SPRN_SPRG3;		/* if from user, start at top of   */\
-	lwz	r1,THREAD_INFO-THREAD(r1); /* this thread's kernel stack   */\
-	addi	r1,r1,THREAD_SIZE;					     \
-1:	subi	r1,r1,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
-	mr	r11,r1;							     \
-	stw	r10,_CCR(r11);          /* save various registers	   */\
-	stw	r12,GPR12(r11);						     \
-	stw	r9,GPR9(r11);						     \
-	mfspr	r10,SPRN_SPRG0;						     \
-	stw	r10,GPR10(r11);						     \
-	mfspr	r12,SPRN_SPRG1;						     \
-	stw	r12,GPR11(r11);						     \
-	mflr	r10;							     \
-	stw	r10,_LINK(r11);						     \
-	mfspr	r10,SPRN_SPRG4R;					     \
-	mfspr	r12,SPRN_SRR0;						     \
-	stw	r10,GPR1(r11);						     \
-	mfspr	r9,SPRN_SRR1;						     \
-	stw	r10,0(r11);						     \
-	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
-	stw	r0,GPR0(r11);						     \
-	SAVE_4GPRS(3, r11);						     \
-	SAVE_2GPRS(7, r11)
-
-/* To handle the additional exception priority levels on 40x and Book-E
- * processors we allocate a 4k stack per additional priority level. The various
- * head_xxx.S files allocate space (exception_stack_top) for each priority's
- * stack times the number of CPUs
- *
- * On 40x critical is the only additional level
- * On 44x/e500 we have critical and machine check
- * On e200 we have critical and debug (machine check occurs via critical)
- *
- * Additionally we reserve a SPRG for each priority level so we can free up a
- * GPR to use as the base for indirect access to the exception stacks.  This
- * is necessary since the MMU is always on, for Book-E parts, and the stacks
- * are offset from KERNELBASE.
- *
- */
-#define BOOKE_EXCEPTION_STACK_SIZE	(8192)
-
-/* CRIT_SPRG only used in critical exception handling */
-#define CRIT_SPRG	SPRN_SPRG2
-/* MCHECK_SPRG only used in machine check exception handling */
-#define MCHECK_SPRG	SPRN_SPRG6W
-
-#define MCHECK_STACK_TOP	(exception_stack_top - 4096)
-#define CRIT_STACK_TOP		(exception_stack_top)
-
-/* only on e200 for now */
-#define DEBUG_STACK_TOP		(exception_stack_top - 4096)
-#define DEBUG_SPRG		SPRN_SPRG6W
-
-#ifdef CONFIG_SMP
-#define BOOKE_LOAD_EXC_LEVEL_STACK(level)		\
-	mfspr	r8,SPRN_PIR;				\
-	mulli	r8,r8,BOOKE_EXCEPTION_STACK_SIZE;	\
-	neg	r8,r8;					\
-	addis	r8,r8,level##_STACK_TOP@ha;		\
-	addi	r8,r8,level##_STACK_TOP@l
-#else
-#define BOOKE_LOAD_EXC_LEVEL_STACK(level)		\
-	lis	r8,level##_STACK_TOP@h;			\
-	ori	r8,r8,level##_STACK_TOP@l
-#endif
-
-/*
- * Exception prolog for critical/machine check exceptions.  This is a
- * little different from the normal exception prolog above since a
- * critical/machine check exception can potentially occur at any point
- * during normal exception processing. Thus we cannot use the same SPRG
- * registers as the normal prolog above. Instead we use a portion of the
- * critical/machine check exception stack at low physical addresses.
- */
-#define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, exc_level_srr0, exc_level_srr1) \
-	mtspr	exc_level##_SPRG,r8;					     \
-	BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
-	stw	r10,GPR10-INT_FRAME_SIZE(r8);				     \
-	stw	r11,GPR11-INT_FRAME_SIZE(r8);				     \
-	mfcr	r10;			/* save CR in r10 for now	   */\
-	mfspr	r11,exc_level_srr1;	/* check whether user or kernel    */\
-	andi.	r11,r11,MSR_PR;						     \
-	mr	r11,r8;							     \
-	mfspr	r8,exc_level##_SPRG;					     \
-	beq	1f;							     \
-	/* COMING FROM USER MODE */					     \
-	mfspr	r11,SPRN_SPRG3;		/* if from user, start at top of   */\
-	lwz	r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
-	addi	r11,r11,THREAD_SIZE;					     \
-1:	subi	r11,r11,INT_FRAME_SIZE;	/* Allocate an exception frame     */\
-	stw	r10,_CCR(r11);          /* save various registers	   */\
-	stw	r12,GPR12(r11);						     \
-	stw	r9,GPR9(r11);						     \
-	mflr	r10;							     \
-	stw	r10,_LINK(r11);						     \
-	mfspr	r12,SPRN_DEAR;		/* save DEAR and ESR in the frame  */\
-	stw	r12,_DEAR(r11);		/* since they may have had stuff   */\
-	mfspr	r9,SPRN_ESR;		/* in them at the point where the  */\
-	stw	r9,_ESR(r11);		/* exception was taken		   */\
-	mfspr	r12,exc_level_srr0;					     \
-	stw	r1,GPR1(r11);						     \
-	mfspr	r9,exc_level_srr1;					     \
-	stw	r1,0(r11);						     \
-	mr	r1,r11;							     \
-	rlwinm	r9,r9,0,14,12;		/* clear MSR_WE (necessary?)	   */\
-	stw	r0,GPR0(r11);						     \
-	SAVE_4GPRS(3, r11);						     \
-	SAVE_2GPRS(7, r11)
-
-#define CRITICAL_EXCEPTION_PROLOG \
-		EXC_LEVEL_EXCEPTION_PROLOG(CRIT, SPRN_CSRR0, SPRN_CSRR1)
-#define DEBUG_EXCEPTION_PROLOG \
-		EXC_LEVEL_EXCEPTION_PROLOG(DEBUG, SPRN_DSRR0, SPRN_DSRR1)
-#define MCHECK_EXCEPTION_PROLOG \
-		EXC_LEVEL_EXCEPTION_PROLOG(MCHECK, SPRN_MCSRR0, SPRN_MCSRR1)
-
-/*
- * Exception vectors.
- */
-#define	START_EXCEPTION(label)						     \
-        .align 5;              						     \
-label:
-
-#define FINISH_EXCEPTION(func)					\
-	bl	transfer_to_handler_full;			\
-	.long	func;						\
-	.long	ret_from_except_full
-
-#define EXCEPTION(n, label, hdlr, xfer)				\
-	START_EXCEPTION(label);					\
-	NORMAL_EXCEPTION_PROLOG;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
-	xfer(n, hdlr)
-
-#define CRITICAL_EXCEPTION(n, label, hdlr)			\
-	START_EXCEPTION(label);					\
-	CRITICAL_EXCEPTION_PROLOG;				\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
-	EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-			  NOCOPY, crit_transfer_to_handler, \
-			  ret_from_crit_exc)
-
-#define MCHECK_EXCEPTION(n, label, hdlr)			\
-	START_EXCEPTION(label);					\
-	MCHECK_EXCEPTION_PROLOG;				\
-	mfspr	r5,SPRN_ESR;					\
-	stw	r5,_ESR(r11);					\
-	addi	r3,r1,STACK_FRAME_OVERHEAD;			\
-	EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
-			  NOCOPY, mcheck_transfer_to_handler,   \
-			  ret_from_mcheck_exc)
-
-#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret)	\
-	li	r10,trap;					\
-	stw	r10,TRAP(r11);					\
-	lis	r10,msr@h;					\
-	ori	r10,r10,msr@l;					\
-	copyee(r10, r9);					\
-	bl	tfer;		 				\
-	.long	hdlr;						\
-	.long	ret
-
-#define COPY_EE(d, s)		rlwimi d,s,0,16,16
-#define NOCOPY(d, s)
-
-#define EXC_XFER_STD(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_LITE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
-			  ret_from_except)
-
-#define EXC_XFER_EE(n, hdlr)		\
-	EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
-			  ret_from_except_full)
-
-#define EXC_XFER_EE_LITE(n, hdlr)	\
-	EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
-			  ret_from_except)
-
-/* Check for a single step debug exception while in an exception
- * handler before state has been saved.  This is to catch the case
- * where an instruction that we are trying to single step causes
- * an exception (eg ITLB/DTLB miss) and thus the first instruction of
- * the exception handler generates a single step debug exception.
- *
- * If we get a debug trap on the first instruction of an exception handler,
- * we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
- * a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
- * The exception handler was handling a non-critical interrupt, so it will
- * save (and later restore) the MSR via SPRN_CSRR1, which will still have
- * the MSR_DE bit set.
- */
-#define DEBUG_EXCEPTION							      \
-	START_EXCEPTION(Debug);						      \
-	CRITICAL_EXCEPTION_PROLOG;					      \
-									      \
-	/*								      \
-	 * If there is a single step or branch-taken exception in an	      \
-	 * exception entry sequence, it was probably meant to apply to	      \
-	 * the code where the exception occurred (since exception entry	      \
-	 * doesn't turn off DE automatically).  We simulate the effect	      \
-	 * of turning off DE on entry to an exception handler by turning      \
-	 * off DE in the CSRR1 value and clearing the debug status.	      \
-	 */								      \
-	mfspr	r10,SPRN_DBSR;		/* check single-step/branch taken */  \
-	andis.	r10,r10,DBSR_IC@h;					      \
-	beq+	2f;							      \
-									      \
-	lis	r10,KERNELBASE@h;	/* check if exception in vectors */   \
-	ori	r10,r10,KERNELBASE@l;					      \
-	cmplw	r12,r10;						      \
-	blt+	2f;			/* addr below exception vectors */    \
-									      \
-	lis	r10,Debug@h;						      \
-	ori	r10,r10,Debug@l;					      \
-	cmplw	r12,r10;						      \
-	bgt+	2f;			/* addr above exception vectors */    \
-									      \
-	/* here it looks like we got an inappropriate debug exception. */     \
-1:	rlwinm	r9,r9,0,~MSR_DE;	/* clear DE in the CSRR1 value */     \
-	lis	r10,DBSR_IC@h;		/* clear the IC event */	      \
-	mtspr	SPRN_DBSR,r10;						      \
-	/* restore state and get out */					      \
-	lwz	r10,_CCR(r11);						      \
-	lwz	r0,GPR0(r11);						      \
-	lwz	r1,GPR1(r11);						      \
-	mtcrf	0x80,r10;						      \
-	mtspr	SPRN_CSRR0,r12;						      \
-	mtspr	SPRN_CSRR1,r9;						      \
-	lwz	r9,GPR9(r11);						      \
-	lwz	r12,GPR12(r11);						      \
-	mtspr	CRIT_SPRG,r8;						      \
-	BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */  \
-	lwz	r10,GPR10-INT_FRAME_SIZE(r8);				      \
-	lwz	r11,GPR11-INT_FRAME_SIZE(r8);				      \
-	mfspr	r8,CRIT_SPRG;						      \
-									      \
-	rfci;								      \
-	b	.;							      \
-									      \
-	/* continue normal handling for a critical exception... */	      \
-2:	mfspr	r4,SPRN_DBSR;						      \
-	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
-
-#define INSTRUCTION_STORAGE_EXCEPTION					      \
-	START_EXCEPTION(InstructionStorage)				      \
-	NORMAL_EXCEPTION_PROLOG;					      \
-	mfspr	r5,SPRN_ESR;		/* Grab the ESR and save it */	      \
-	stw	r5,_ESR(r11);						      \
-	mr      r4,r12;                 /* Pass SRR0 as arg2 */		      \
-	li      r5,0;                   /* Pass zero as arg3 */		      \
-	EXC_XFER_EE_LITE(0x0400, handle_page_fault)
-
-#define ALIGNMENT_EXCEPTION						      \
-	START_EXCEPTION(Alignment)					      \
-	NORMAL_EXCEPTION_PROLOG;					      \
-	mfspr   r4,SPRN_DEAR;           /* Grab the DEAR and save it */	      \
-	stw     r4,_DEAR(r11);						      \
-	addi    r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_EE(0x0600, alignment_exception)
-
-#define PROGRAM_EXCEPTION						      \
-	START_EXCEPTION(Program)					      \
-	NORMAL_EXCEPTION_PROLOG;					      \
-	mfspr	r4,SPRN_ESR;		/* Grab the ESR and save it */	      \
-	stw	r4,_ESR(r11);						      \
-	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_STD(0x0700, program_check_exception)
-
-#define DECREMENTER_EXCEPTION						      \
-	START_EXCEPTION(Decrementer)					      \
-	NORMAL_EXCEPTION_PROLOG;					      \
-	lis     r0,TSR_DIS@h;           /* Setup the DEC interrupt mask */    \
-	mtspr   SPRN_TSR,r0;		/* Clear the DEC interrupt */	      \
-	addi    r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_LITE(0x0900, timer_interrupt)
-
-#define FP_UNAVAILABLE_EXCEPTION					      \
-	START_EXCEPTION(FloatingPointUnavailable)			      \
-	NORMAL_EXCEPTION_PROLOG;					      \
-	bne	load_up_fpu;		/* if from user, just load it up */   \
-	addi	r3,r1,STACK_FRAME_OVERHEAD;				      \
-	EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
-
-#endif /* __HEAD_BOOKE_H__ */
diff --git a/arch/ppc/kernel/machine_kexec.c b/arch/ppc/kernel/machine_kexec.c
deleted file mode 100644
index a469ba438cbe..000000000000
--- a/arch/ppc/kernel/machine_kexec.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * machine_kexec.c - handle transition of Linux booting another kernel
- * Copyright (C) 2002-2003 Eric Biederman  <ebiederm@xmission.com>
- *
- * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
- *
- * This source code is licensed under the GNU General Public License,
- * Version 2.  See the file COPYING for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/kexec.h>
-#include <linux/delay.h>
-#include <linux/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/mmu_context.h>
-#include <asm/io.h>
-#include <asm/hw_irq.h>
-#include <asm/cacheflush.h>
-#include <asm/machdep.h>
-
-typedef NORET_TYPE void (*relocate_new_kernel_t)(
-				unsigned long indirection_page,
-				unsigned long reboot_code_buffer,
-				unsigned long start_address) ATTRIB_NORET;
-
-extern const unsigned char relocate_new_kernel[];
-extern const unsigned int relocate_new_kernel_size;
-
-void machine_shutdown(void)
-{
-	if (ppc_md.machine_shutdown)
-		ppc_md.machine_shutdown();
-}
-
-void machine_crash_shutdown(struct pt_regs *regs)
-{
-	if (ppc_md.machine_crash_shutdown)
-		ppc_md.machine_crash_shutdown();
-}
-
-/*
- * Do what every setup is needed on image and the
- * reboot code buffer to allow us to avoid allocations
- * later.
- */
-int machine_kexec_prepare(struct kimage *image)
-{
-	if (ppc_md.machine_kexec_prepare)
-		return ppc_md.machine_kexec_prepare(image);
-	/*
-	 * Fail if platform doesn't provide its own machine_kexec_prepare
-	 * implementation.
-	 */
-	return -ENOSYS;
-}
-
-void machine_kexec_cleanup(struct kimage *image)
-{
-	if (ppc_md.machine_kexec_cleanup)
-		ppc_md.machine_kexec_cleanup(image);
-}
-
-/*
- * Do not allocate memory (or fail in any way) in machine_kexec().
- * We are past the point of no return, committed to rebooting now.
- */
-NORET_TYPE void machine_kexec(struct kimage *image)
-{
-	if (ppc_md.machine_kexec)
-		ppc_md.machine_kexec(image);
-	else {
-		/*
-		 * Fall back to normal restart if platform doesn't provide
-		 * its own kexec function, and user insist to kexec...
-		 */
-		machine_restart(NULL);
-	}
-	for(;;);
-}
-
-/*
- * This is a generic machine_kexec function suitable at least for
- * non-OpenFirmware embedded platforms.
- * It merely copies the image relocation code to the control page and
- * jumps to it.
- * A platform specific function may just call this one.
- */
-void machine_kexec_simple(struct kimage *image)
-{
-	unsigned long page_list;
-	unsigned long reboot_code_buffer, reboot_code_buffer_phys;
-	relocate_new_kernel_t rnk;
-
-	/* Interrupts aren't acceptable while we reboot */
-	local_irq_disable();
-
-	page_list = image->head;
-
-	/* we need both effective and real address here */
-	reboot_code_buffer =
-			(unsigned long)page_address(image->control_code_page);
-	reboot_code_buffer_phys = virt_to_phys((void *)reboot_code_buffer);
-
-	/* copy our kernel relocation code to the control code page */
-	memcpy((void *)reboot_code_buffer, relocate_new_kernel,
-						relocate_new_kernel_size);
-
-	flush_icache_range(reboot_code_buffer,
-				reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE);
-	printk(KERN_INFO "Bye!\n");
-
-	/* now call it */
-	rnk = (relocate_new_kernel_t) reboot_code_buffer;
-	(*rnk)(page_list, reboot_code_buffer_phys, image->start);
-}
-
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
deleted file mode 100644
index d5e0dfc9ffec..000000000000
--- a/arch/ppc/kernel/misc.S
+++ /dev/null
@@ -1,868 +0,0 @@
-/*
- * This file contains miscellaneous low-level functions.
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/sys.h>
-#include <asm/unistd.h>
-#include <asm/errno.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/cache.h>
-#include <asm/cputable.h>
-#include <asm/mmu.h>
-#include <asm/ppc_asm.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-
-#ifdef CONFIG_8xx
-#define ISYNC_8xx isync
-#else
-#define ISYNC_8xx
-#endif
-	.text
-
-	.align	5
-_GLOBAL(__delay)
-	cmpwi	0,r3,0
-	mtctr	r3
-	beqlr
-1:	bdnz	1b
-	blr
-
-/*
- * Returns (address we're running at) - (address we were linked at)
- * for use before the text and data are mapped to KERNELBASE.
- */
-_GLOBAL(reloc_offset)
-	mflr	r0
-	bl	1f
-1:	mflr	r3
-	lis	r4,1b@ha
-	addi	r4,r4,1b@l
-	subf	r3,r4,r3
-	mtlr	r0
-	blr
-
-/*
- * add_reloc_offset(x) returns x + reloc_offset().
- */
-_GLOBAL(add_reloc_offset)
-	mflr	r0
-	bl	1f
-1:	mflr	r5
-	lis	r4,1b@ha
-	addi	r4,r4,1b@l
-	subf	r5,r4,r5
-	add	r3,r3,r5
-	mtlr	r0
-	blr
-
-/*
- * sub_reloc_offset(x) returns x - reloc_offset().
- */
-_GLOBAL(sub_reloc_offset)
-	mflr	r0
-	bl	1f
-1:	mflr	r5
-	lis	r4,1b@ha
-	addi	r4,r4,1b@l
-	subf	r5,r4,r5
-	subf	r3,r5,r3
-	mtlr	r0
-	blr
-
-/*
- * reloc_got2 runs through the .got2 section adding an offset
- * to each entry.
- */
-_GLOBAL(reloc_got2)
-	mflr	r11
-	lis	r7,__got2_start@ha
-	addi	r7,r7,__got2_start@l
-	lis	r8,__got2_end@ha
-	addi	r8,r8,__got2_end@l
-	subf	r8,r7,r8
-	srwi.	r8,r8,2
-	beqlr
-	mtctr	r8
-	bl	1f
-1:	mflr	r0
-	lis	r4,1b@ha
-	addi	r4,r4,1b@l
-	subf	r0,r4,r0
-	add	r7,r0,r7
-2:	lwz	r0,0(r7)
-	add	r0,r0,r3
-	stw	r0,0(r7)
-	addi	r7,r7,4
-	bdnz	2b
-	mtlr	r11
-	blr
-
-/*
- * call_setup_cpu - call the setup_cpu function for this cpu
- * r3 = data offset, r24 = cpu number
- *
- * Setup function is called with:
- *   r3 = data offset
- *   r4 = ptr to CPU spec (relocated)
- */
-_GLOBAL(call_setup_cpu)
-	addis	r4,r3,cur_cpu_spec@ha
-	addi	r4,r4,cur_cpu_spec@l
-	lwz	r4,0(r4)
-	add	r4,r4,r3
-	lwz	r5,CPU_SPEC_SETUP(r4)
-	cmpi	0,r5,0
-	add	r5,r5,r3
-	beqlr
-	mtctr	r5
-	bctr
-
-/*
- * complement mask on the msr then "or" some values on.
- *     _nmask_and_or_msr(nmask, value_to_or)
- */
-_GLOBAL(_nmask_and_or_msr)
-	mfmsr	r0		/* Get current msr */
-	andc	r0,r0,r3	/* And off the bits set in r3 (first parm) */
-	or	r0,r0,r4	/* Or on the bits in r4 (second parm) */
-	SYNC			/* Some chip revs have problems here... */
-	mtmsr	r0		/* Update machine state */
-	isync
-	blr			/* Done */
-
-
-/*
- * Flush MMU TLB
- */
-_GLOBAL(_tlbia)
-#if defined(CONFIG_40x)
-	sync			/* Flush to memory before changing mapping */
-	tlbia
-	isync			/* Flush shadow TLB */
-#elif defined(CONFIG_44x)
-	li	r3,0
-	sync
-
-	/* Load high watermark */
-	lis	r4,tlb_44x_hwater@ha
-	lwz	r5,tlb_44x_hwater@l(r4)
-
-1:	tlbwe	r3,r3,PPC44x_TLB_PAGEID
-	addi	r3,r3,1
-	cmpw	0,r3,r5
-	ble	1b
-
-	isync
-#else /* !(CONFIG_40x || CONFIG_44x) */
-#if defined(CONFIG_SMP)
-	rlwinm	r8,r1,0,0,18
-	lwz	r8,TI_CPU(r8)
-	oris	r8,r8,10
-	mfmsr	r10
-	SYNC
-	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
-	rlwinm	r0,r0,0,28,26		/* clear DR */
-	mtmsr	r0
-	SYNC_601
-	isync
-	lis	r9,mmu_hash_lock@h
-	ori	r9,r9,mmu_hash_lock@l
-	tophys(r9,r9)
-10:	lwarx	r7,0,r9
-	cmpwi	0,r7,0
-	bne-	10b
-	stwcx.	r8,0,r9
-	bne-	10b
-	sync
-	tlbia
-	sync
-	TLBSYNC
-	li	r0,0
-	stw	r0,0(r9)		/* clear mmu_hash_lock */
-	mtmsr	r10
-	SYNC_601
-	isync
-#else /* CONFIG_SMP */
-	sync
-	tlbia
-	sync
-#endif /* CONFIG_SMP */
-#endif /* ! defined(CONFIG_40x) */
-	blr
-
-/*
- * Flush MMU TLB for a particular address
- */
-_GLOBAL(_tlbie)
-#if defined(CONFIG_40x)
-	/* We run the search with interrupts disabled because we have to change
-	 * the PID and I don't want to preempt when that happens.
-	 */
-	mfmsr	r5
-	mfspr	r6,SPRN_PID
-	wrteei	0
-	mtspr	SPRN_PID,r4
-	tlbsx.	r3, 0, r3
-	mtspr	SPRN_PID,r6
-	wrtee	r5
-	bne	10f
-	sync
-	/* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear.
-	 * Since 25 is the V bit in the TLB_TAG, loading this value will invalidate
-	 * the TLB entry. */
-	tlbwe	r3, r3, TLB_TAG
-	isync
-10:
-#elif defined(CONFIG_44x)
-	mfspr	r5,SPRN_MMUCR
-	rlwimi	r5,r4,0,24,31			/* Set TID */
-
-	/* We have to run the search with interrupts disabled, even critical
-	 * and debug interrupts (in fact the only critical exceptions we have
-	 * are debug and machine check).  Otherwise  an interrupt which causes
-	 * a TLB miss can clobber the MMUCR between the mtspr and the tlbsx. */
-	mfmsr	r4
-	lis	r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@ha
-	addi	r6,r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l
-	andc	r6,r4,r6
-	mtmsr	r6
-	mtspr	SPRN_MMUCR,r5
-	tlbsx.	r3, 0, r3
-	mtmsr	r4
-	bne	10f
-	sync
-	/* There are only 64 TLB entries, so r3 < 64,
-	 * which means bit 22, is clear.  Since 22 is
-	 * the V bit in the TLB_PAGEID, loading this
-	 * value will invalidate the TLB entry.
-	 */
-	tlbwe	r3, r3, PPC44x_TLB_PAGEID
-	isync
-10:
-#else /* !(CONFIG_40x || CONFIG_44x) */
-#if defined(CONFIG_SMP)
-	rlwinm	r8,r1,0,0,18
-	lwz	r8,TI_CPU(r8)
-	oris	r8,r8,11
-	mfmsr	r10
-	SYNC
-	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
-	rlwinm	r0,r0,0,28,26		/* clear DR */
-	mtmsr	r0
-	SYNC_601
-	isync
-	lis	r9,mmu_hash_lock@h
-	ori	r9,r9,mmu_hash_lock@l
-	tophys(r9,r9)
-10:	lwarx	r7,0,r9
-	cmpwi	0,r7,0
-	bne-	10b
-	stwcx.	r8,0,r9
-	bne-	10b
-	eieio
-	tlbie	r3
-	sync
-	TLBSYNC
-	li	r0,0
-	stw	r0,0(r9)		/* clear mmu_hash_lock */
-	mtmsr	r10
-	SYNC_601
-	isync
-#else /* CONFIG_SMP */
-	tlbie	r3
-	sync
-#endif /* CONFIG_SMP */
-#endif /* ! CONFIG_40x */
-	blr
-
-/*
- * Flush instruction cache.
- * This is a no-op on the 601.
- */
-_GLOBAL(flush_instruction_cache)
-#if defined(CONFIG_8xx)
-	isync
-	lis	r5, IDC_INVALL@h
-	mtspr	SPRN_IC_CST, r5
-#elif defined(CONFIG_4xx)
-#ifdef CONFIG_403GCX
-	li      r3, 512
-	mtctr   r3
-	lis     r4, KERNELBASE@h
-1:	iccci   0, r4
-	addi    r4, r4, 16
-	bdnz    1b
-#else
-	lis	r3, KERNELBASE@h
-	iccci	0,r3
-#endif
-#else
-	mfspr	r3,SPRN_PVR
-	rlwinm	r3,r3,16,16,31
-	cmpwi	0,r3,1
-	beqlr			/* for 601, do nothing */
-	/* 603/604 processor - use invalidate-all bit in HID0 */
-	mfspr	r3,SPRN_HID0
-	ori	r3,r3,HID0_ICFI
-	mtspr	SPRN_HID0,r3
-#endif /* CONFIG_8xx/4xx */
-	isync
-	blr
-
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- * This is a no-op on the 601.
- *
- * __flush_icache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(__flush_icache_range)
-BEGIN_FTR_SECTION
-	blr				/* for 601, do nothing */
-END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-	mr	r6,r3
-1:	dcbst	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbst's to get to ram */
-	mtctr	r4
-2:	icbi	0,r6
-	addi	r6,r6,L1_CACHE_BYTES
-	bdnz	2b
-	sync				/* additional sync needed on g4 */
-	isync
-	blr
-/*
- * Write any modified data cache blocks out to memory.
- * Does not invalidate the corresponding cache lines (especially for
- * any corresponding instruction cache).
- *
- * clean_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(clean_dcache_range)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-
-1:	dcbst	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbst's to get to ram */
-	blr
-
-/*
- * Write any modified data cache blocks out to memory and invalidate them.
- * Does not invalidate the corresponding instruction cache blocks.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_dcache_range)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-
-1:	dcbf	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbst's to get to ram */
-	blr
-
-/*
- * Like above, but invalidate the D-cache.  This is used by the 8xx
- * to invalidate the cache so the PPC core doesn't get stale data
- * from the CPM (no cache snooping here :-).
- *
- * invalidate_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(invalidate_dcache_range)
-	li	r5,L1_CACHE_BYTES-1
-	andc	r3,r3,r5
-	subf	r4,r3,r4
-	add	r4,r4,r5
-	srwi.	r4,r4,L1_CACHE_SHIFT
-	beqlr
-	mtctr	r4
-
-1:	dcbi	0,r3
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	sync				/* wait for dcbi's to get to ram */
-	blr
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-/*
- * 40x cores have 8K or 16K dcache and 32 byte line size.
- * 44x has a 32K dcache and 32 byte line size.
- * 8xx has 1, 2, 4, 8K variants.
- * For now, cover the worst case of the 44x.
- * Must be called with external interrupts disabled.
- */
-#define CACHE_NWAYS	64
-#define CACHE_NLINES	16
-
-_GLOBAL(flush_dcache_all)
-	li	r4, (2 * CACHE_NWAYS * CACHE_NLINES)
-	mtctr	r4
-	lis     r5, KERNELBASE@h
-1:	lwz	r3, 0(r5)		/* Load one word from every line */
-	addi	r5, r5, L1_CACHE_BYTES
-	bdnz    1b
-	blr
-#endif /* CONFIG_NOT_COHERENT_CACHE */
-
-/*
- * Flush a particular page from the data cache to RAM.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- * This is a no-op on the 601 which has a unified cache.
- *
- *	void __flush_dcache_icache(void *page)
- */
-_GLOBAL(__flush_dcache_icache)
-BEGIN_FTR_SECTION
-	blr					/* for 601, do nothing */
-END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
-	rlwinm	r3,r3,0,0,19			/* Get page base address */
-	li	r4,4096/L1_CACHE_BYTES	/* Number of lines in a page */
-	mtctr	r4
-	mr	r6,r3
-0:	dcbst	0,r3				/* Write line to ram */
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	0b
-	sync
-#ifndef CONFIG_44x
-	/* We don't flush the icache on 44x. Those have a virtual icache
-	 * and we don't have access to the virtual address here (it's
-	 * not the page vaddr but where it's mapped in user space). The
-	 * flushing of the icache on these is handled elsewhere, when
-	 * a change in the address space occurs, before returning to
-	 * user space
-	 */
-	mtctr	r4
-1:	icbi	0,r6
-	addi	r6,r6,L1_CACHE_BYTES
-	bdnz	1b
-	sync
-	isync
-#endif /* CONFIG_44x */
-	blr
-
-/*
- * Flush a particular page from the data cache to RAM, identified
- * by its physical address.  We turn off the MMU so we can just use
- * the physical address (this may be a highmem page without a kernel
- * mapping).
- *
- *	void __flush_dcache_icache_phys(unsigned long physaddr)
- */
-_GLOBAL(__flush_dcache_icache_phys)
-BEGIN_FTR_SECTION
-	blr					/* for 601, do nothing */
-END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
-	mfmsr	r10
-	rlwinm	r0,r10,0,28,26			/* clear DR */
-	mtmsr	r0
-	isync
-	rlwinm	r3,r3,0,0,19			/* Get page base address */
-	li	r4,4096/L1_CACHE_BYTES	/* Number of lines in a page */
-	mtctr	r4
-	mr	r6,r3
-0:	dcbst	0,r3				/* Write line to ram */
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	0b
-	sync
-	mtctr	r4
-1:	icbi	0,r6
-	addi	r6,r6,L1_CACHE_BYTES
-	bdnz	1b
-	sync
-	mtmsr	r10				/* restore DR */
-	isync
-	blr
-
-/*
- * Clear pages using the dcbz instruction, which doesn't cause any
- * memory traffic (except to write out any cache lines which get
- * displaced).  This only works on cacheable memory.
- *
- * void clear_pages(void *page, int order) ;
- */
-_GLOBAL(clear_pages)
-	li	r0,4096/L1_CACHE_BYTES
-	slw	r0,r0,r4
-	mtctr	r0
-#ifdef CONFIG_8xx
-	li	r4, 0
-1:	stw	r4, 0(r3)
-	stw	r4, 4(r3)
-	stw	r4, 8(r3)
-	stw	r4, 12(r3)
-#else
-1:	dcbz	0,r3
-#endif
-	addi	r3,r3,L1_CACHE_BYTES
-	bdnz	1b
-	blr
-
-/*
- * Copy a whole page.  We use the dcbz instruction on the destination
- * to reduce memory traffic (it eliminates the unnecessary reads of
- * the destination into cache).  This requires that the destination
- * is cacheable.
- */
-#define COPY_16_BYTES		\
-	lwz	r6,4(r4);	\
-	lwz	r7,8(r4);	\
-	lwz	r8,12(r4);	\
-	lwzu	r9,16(r4);	\
-	stw	r6,4(r3);	\
-	stw	r7,8(r3);	\
-	stw	r8,12(r3);	\
-	stwu	r9,16(r3)
-
-_GLOBAL(copy_page)
-	addi	r3,r3,-4
-	addi	r4,r4,-4
-
-#ifdef CONFIG_8xx
-	/* don't use prefetch on 8xx */
-    	li	r0,4096/L1_CACHE_BYTES
-	mtctr	r0
-1:	COPY_16_BYTES
-	bdnz	1b
-	blr
-
-#else	/* not 8xx, we can prefetch */
-	li	r5,4
-
-#if MAX_COPY_PREFETCH > 1
-	li	r0,MAX_COPY_PREFETCH
-	li	r11,4
-	mtctr	r0
-11:	dcbt	r11,r4
-	addi	r11,r11,L1_CACHE_BYTES
-	bdnz	11b
-#else /* MAX_COPY_PREFETCH == 1 */
-	dcbt	r5,r4
-	li	r11,L1_CACHE_BYTES+4
-#endif /* MAX_COPY_PREFETCH */
-	li	r0,4096/L1_CACHE_BYTES - MAX_COPY_PREFETCH
-	crclr	4*cr0+eq
-2:
-	mtctr	r0
-1:
-	dcbt	r11,r4
-	dcbz	r5,r3
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 32
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 64
-	COPY_16_BYTES
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 128
-	COPY_16_BYTES
-	COPY_16_BYTES
-	COPY_16_BYTES
-	COPY_16_BYTES
-#endif
-#endif
-#endif
-	bdnz	1b
-	beqlr
-	crnot	4*cr0+eq,4*cr0+eq
-	li	r0,MAX_COPY_PREFETCH
-	li	r11,4
-	b	2b
-#endif	/* CONFIG_8xx */
-
-/*
- * void atomic_clear_mask(atomic_t mask, atomic_t *addr)
- * void atomic_set_mask(atomic_t mask, atomic_t *addr);
- */
-_GLOBAL(atomic_clear_mask)
-10:	lwarx	r5,0,r4
-	andc	r5,r5,r3
-	PPC405_ERR77(0,r4)
-	stwcx.	r5,0,r4
-	bne-	10b
-	blr
-_GLOBAL(atomic_set_mask)
-10:	lwarx	r5,0,r4
-	or	r5,r5,r3
-	PPC405_ERR77(0,r4)
-	stwcx.	r5,0,r4
-	bne-	10b
-	blr
-
-/*
- * I/O string operations
- *
- * insb(port, buf, len)
- * outsb(port, buf, len)
- * insw(port, buf, len)
- * outsw(port, buf, len)
- * insl(port, buf, len)
- * outsl(port, buf, len)
- * insw_ns(port, buf, len)
- * outsw_ns(port, buf, len)
- * insl_ns(port, buf, len)
- * outsl_ns(port, buf, len)
- *
- * The *_ns versions don't do byte-swapping.
- */
-_GLOBAL(_insb)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,1
-	blelr-
-00:	lbz	r5,0(r3)
-01:	eieio
-02:	stbu	r5,1(r4)
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-_GLOBAL(_outsb)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,1
-	blelr-
-00:	lbzu	r5,1(r4)
-01:	stb	r5,0(r3)
-02:	eieio
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-_GLOBAL(_insw_ns)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,2
-	blelr-
-00:	lhz	r5,0(r3)
-01:	eieio
-02:	sthu	r5,2(r4)
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-_GLOBAL(_outsw_ns)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,2
-	blelr-
-00:	lhzu	r5,2(r4)
-01:	sth	r5,0(r3)
-02:	eieio
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-_GLOBAL(_insl_ns)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,4
-	blelr-
-00:	lwz	r5,0(r3)
-01:	eieio
-02:	stwu	r5,4(r4)
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-_GLOBAL(_outsl_ns)
-	cmpwi	0,r5,0
-	mtctr	r5
-	subi	r4,r4,4
-	blelr-
-00:	lwzu	r5,4(r4)
-01:	stw	r5,0(r3)
-02:	eieio
-	ISYNC_8xx
-	.section .fixup,"ax"
-03:	blr
-	.text
-	.section __ex_table, "a"
-		.align 2
-		.long 00b, 03b
-		.long 01b, 03b
-		.long 02b, 03b
-	.text
-	bdnz	00b
-	blr
-
-/*
- * Extended precision shifts.
- *
- * Updated to be valid for shift counts from 0 to 63 inclusive.
- * -- Gabriel
- *
- * R3/R4 has 64 bit value
- * R5    has shift count
- * result in R3/R4
- *
- *  ashrdi3: arithmetic right shift (sign propagation)	
- *  lshrdi3: logical right shift
- *  ashldi3: left shift
- */
-_GLOBAL(__ashrdi3)
-	subfic	r6,r5,32
-	srw	r4,r4,r5	# LSW = count > 31 ? 0 : LSW >> count
-	addi	r7,r5,32	# could be xori, or addi with -32
-	slw	r6,r3,r6	# t1 = count > 31 ? 0 : MSW << (32-count)
-	rlwinm	r8,r7,0,32	# t3 = (count < 32) ? 32 : 0
-	sraw	r7,r3,r7	# t2 = MSW >> (count-32)
-	or	r4,r4,r6	# LSW |= t1
-	slw	r7,r7,r8	# t2 = (count < 32) ? 0 : t2
-	sraw	r3,r3,r5	# MSW = MSW >> count
-	or	r4,r4,r7	# LSW |= t2
-	blr
-
-_GLOBAL(__ashldi3)
-	subfic	r6,r5,32
-	slw	r3,r3,r5	# MSW = count > 31 ? 0 : MSW << count
-	addi	r7,r5,32	# could be xori, or addi with -32
-	srw	r6,r4,r6	# t1 = count > 31 ? 0 : LSW >> (32-count)
-	slw	r7,r4,r7	# t2 = count < 32 ? 0 : LSW << (count-32)
-	or	r3,r3,r6	# MSW |= t1
-	slw	r4,r4,r5	# LSW = LSW << count
-	or	r3,r3,r7	# MSW |= t2
-	blr
-
-_GLOBAL(__lshrdi3)
-	subfic	r6,r5,32
-	srw	r4,r4,r5	# LSW = count > 31 ? 0 : LSW >> count
-	addi	r7,r5,32	# could be xori, or addi with -32
-	slw	r6,r3,r6	# t1 = count > 31 ? 0 : MSW << (32-count)
-	srw	r7,r3,r7	# t2 = count < 32 ? 0 : MSW >> (count-32)
-	or	r4,r4,r6	# LSW |= t1
-	srw	r3,r3,r5	# MSW = MSW >> count
-	or	r4,r4,r7	# LSW |= t2
-	blr
-
-_GLOBAL(abs)
-	srawi	r4,r3,31
-	xor	r3,r3,r4
-	sub	r3,r3,r4
-	blr
-
-_GLOBAL(_get_SP)
-	mr	r3,r1		/* Close enough */
-	blr
-
-/*
- * Create a kernel thread
- *   kernel_thread(fn, arg, flags)
- */
-_GLOBAL(kernel_thread)
-	stwu	r1,-16(r1)
-	stw	r30,8(r1)
-	stw	r31,12(r1)
-	mr	r30,r3		/* function */
-	mr	r31,r4		/* argument */
-	ori	r3,r5,CLONE_VM	/* flags */
-	oris	r3,r3,CLONE_UNTRACED>>16
-	li	r4,0		/* new sp (unused) */
-	li	r0,__NR_clone
-	sc
-	cmpwi	0,r3,0		/* parent or child? */
-	bne	1f		/* return if parent */
-	li	r0,0		/* make top-level stack frame */
-	stwu	r0,-16(r1)
-	mtlr	r30		/* fn addr in lr */
-	mr	r3,r31		/* load arg and call fn */
-	PPC440EP_ERR42
-	blrl
-	li	r0,__NR_exit	/* exit if function returns */
-	li	r3,0
-	sc
-1:	lwz	r30,8(r1)
-	lwz	r31,12(r1)
-	addi	r1,r1,16
-	blr
-
-_GLOBAL(kernel_execve)
-	li	r0,__NR_execve
-	sc
-	bnslr
-	neg	r3,r3
-	blr
-
-/*
- * This routine is just here to keep GCC happy - sigh...
- */
-_GLOBAL(__main)
-	blr
-
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
deleted file mode 100644
index df3ef6db072c..000000000000
--- a/arch/ppc/kernel/pci.c
+++ /dev/null
@@ -1,1233 +0,0 @@
-/*
- * Common prep/chrp pci routines. -- Cort
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/capability.h>
-#include <linux/sched.h>
-#include <linux/errno.h>
-#include <linux/bootmem.h>
-
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/sections.h>
-#include <asm/pci-bridge.h>
-#include <asm/byteorder.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-unsigned long isa_io_base     = 0;
-unsigned long isa_mem_base    = 0;
-unsigned long pci_dram_offset = 0;
-int pcibios_assign_bus_offset = 1;
-
-void pcibios_make_OF_bus_map(void);
-
-static int pci_relocate_bridge_resource(struct pci_bus *bus, int i);
-static int probe_resource(struct pci_bus *parent, struct resource *pr,
-			  struct resource *res, struct resource **conflict);
-static void update_bridge_base(struct pci_bus *bus, int i);
-static void pcibios_fixup_resources(struct pci_dev* dev);
-static void fixup_broken_pcnet32(struct pci_dev* dev);
-static int reparent_resources(struct resource *parent, struct resource *res);
-static void fixup_cpc710_pci64(struct pci_dev* dev);
-
-/* By default, we don't re-assign bus numbers.
- */
-int pci_assign_all_buses;
-
-struct pci_controller* hose_head;
-struct pci_controller** hose_tail = &hose_head;
-
-static int pci_bus_count;
-
-static void
-fixup_broken_pcnet32(struct pci_dev* dev)
-{
-	if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
-		dev->vendor = PCI_VENDOR_ID_AMD;
-		pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
-	}
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT,	PCI_ANY_ID,			fixup_broken_pcnet32);
-
-static void
-fixup_cpc710_pci64(struct pci_dev* dev)
-{
-	/* Hide the PCI64 BARs from the kernel as their content doesn't
-	 * fit well in the resource management
-	 */
-	dev->resource[0].start = dev->resource[0].end = 0;
-	dev->resource[0].flags = 0;
-	dev->resource[1].start = dev->resource[1].end = 0;
-	dev->resource[1].flags = 0;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM,	PCI_DEVICE_ID_IBM_CPC710_PCI64,	fixup_cpc710_pci64);
-
-static void
-pcibios_fixup_resources(struct pci_dev *dev)
-{
-	struct pci_controller* hose = (struct pci_controller *)dev->sysdata;
-	int i;
-	unsigned long offset;
-
-	if (!hose) {
-		printk(KERN_ERR "No hose for PCI dev %s!\n", pci_name(dev));
-		return;
-	}
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		struct resource *res = dev->resource + i;
-		if (!res->flags)
-			continue;
-		if (res->end == 0xffffffff) {
-			DBG("PCI:%s Resource %d [%016llx-%016llx] is unassigned\n",
-				pci_name(dev), i,
-				(unsigned long long)res->start,
-				(unsigned long long)res->end);
-			res->end -= res->start;
-			res->start = 0;
-			res->flags |= IORESOURCE_UNSET;
-			continue;
-		}
-		offset = 0;
-		if (res->flags & IORESOURCE_MEM) {
-			offset = hose->pci_mem_offset;
-		} else if (res->flags & IORESOURCE_IO) {
-			offset = (unsigned long) hose->io_base_virt
-				- isa_io_base;
-		}
-		if (offset != 0) {
-			res->start += offset;
-			res->end += offset;
-#ifdef DEBUG
-			printk("Fixup res %d (%lx) of dev %s: %lx -> %lx\n",
-			       i, res->flags, pci_name(dev),
-			       res->start - offset, res->start);
-#endif
-		}
-	}
-
-	/* Call machine specific resource fixup */
-	if (ppc_md.pcibios_fixup_resources)
-		ppc_md.pcibios_fixup_resources(dev);
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID,		PCI_ANY_ID,			pcibios_fixup_resources);
-
-void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-			struct resource *res)
-{
-	unsigned long offset = 0;
-	struct pci_controller *hose = dev->sysdata;
-
-	if (hose && res->flags & IORESOURCE_IO)
-		offset = (unsigned long)hose->io_base_virt - isa_io_base;
-	else if (hose && res->flags & IORESOURCE_MEM)
-		offset = hose->pci_mem_offset;
-	region->start = res->start - offset;
-	region->end = res->end - offset;
-}
-EXPORT_SYMBOL(pcibios_resource_to_bus);
-
-void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
-			     struct pci_bus_region *region)
-{
-	unsigned long offset = 0;
-	struct pci_controller *hose = dev->sysdata;
-
-	if (hose && res->flags & IORESOURCE_IO)
-		offset = (unsigned long)hose->io_base_virt - isa_io_base;
-	else if (hose && res->flags & IORESOURCE_MEM)
-		offset = hose->pci_mem_offset;
-	res->start = region->start + offset;
-	res->end = region->end + offset;
-}
-EXPORT_SYMBOL(pcibios_bus_to_resource);
-
-/*
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- *
- * Why? Because some silly external IO cards only decode
- * the low 10 bits of the IO address. The 0x00-0xff region
- * is reserved for motherboard devices that decode all 16
- * bits, so it's ok to allocate at, say, 0x2800-0x28ff,
- * but we want to try to avoid allocating at 0x2900-0x2bff
- * which might have be mirrored at 0x0100-0x03ff..
- */
-void pcibios_align_resource(void *data, struct resource *res,
-				resource_size_t size, resource_size_t align)
-{
-	struct pci_dev *dev = data;
-
-	if (res->flags & IORESOURCE_IO) {
-		resource_size_t start = res->start;
-
-		if (size > 0x100) {
-			printk(KERN_ERR "PCI: I/O Region %s/%d too large"
-			       " (%lld bytes)\n", pci_name(dev),
-			       dev->resource - res, (unsigned long long)size);
-		}
-
-		if (start & 0x300) {
-			start = (start + 0x3ff) & ~0x3ff;
-			res->start = start;
-		}
-	}
-}
-EXPORT_SYMBOL(pcibios_align_resource);
-
-/*
- *  Handle resources of PCI devices.  If the world were perfect, we could
- *  just allocate all the resource regions and do nothing more.  It isn't.
- *  On the other hand, we cannot just re-allocate all devices, as it would
- *  require us to know lots of host bridge internals.  So we attempt to
- *  keep as much of the original configuration as possible, but tweak it
- *  when it's found to be wrong.
- *
- *  Known BIOS problems we have to work around:
- *	- I/O or memory regions not configured
- *	- regions configured, but not enabled in the command register
- *	- bogus I/O addresses above 64K used
- *	- expansion ROMs left enabled (this may sound harmless, but given
- *	  the fact the PCI specs explicitly allow address decoders to be
- *	  shared between expansion ROMs and other resource regions, it's
- *	  at least dangerous)
- *
- *  Our solution:
- *	(1) Allocate resources for all buses behind PCI-to-PCI bridges.
- *	    This gives us fixed barriers on where we can allocate.
- *	(2) Allocate resources for all enabled devices.  If there is
- *	    a collision, just mark the resource as unallocated. Also
- *	    disable expansion ROMs during this step.
- *	(3) Try to allocate resources for disabled devices.  If the
- *	    resources were assigned correctly, everything goes well,
- *	    if they weren't, they won't disturb allocation of other
- *	    resources.
- *	(4) Assign new addresses to resources which were either
- *	    not configured at all or misconfigured.  If explicitly
- *	    requested by the user, configure expansion ROM address
- *	    as well.
- */
-
-static void __init
-pcibios_allocate_bus_resources(struct list_head *bus_list)
-{
-	struct pci_bus *bus;
-	int i;
-	struct resource *res, *pr;
-
-	/* Depth-First Search on bus tree */
-	list_for_each_entry(bus, bus_list, node) {
-		for (i = 0; i < 4; ++i) {
-			if ((res = bus->resource[i]) == NULL || !res->flags
-			    || res->start > res->end)
-				continue;
-			if (bus->parent == NULL)
-				pr = (res->flags & IORESOURCE_IO)?
-					&ioport_resource: &iomem_resource;
-			else {
-				pr = pci_find_parent_resource(bus->self, res);
-				if (pr == res) {
-					/* this happens when the generic PCI
-					 * code (wrongly) decides that this
-					 * bridge is transparent  -- paulus
-					 */
-					continue;
-				}
-			}
-
-			DBG("PCI: bridge rsrc %llx..%llx (%lx), parent %p\n",
-				(unsigned long long)res->start,
-				(unsigned long long)res->end, res->flags, pr);
-			if (pr) {
-				if (request_resource(pr, res) == 0)
-					continue;
-				/*
-				 * Must be a conflict with an existing entry.
-				 * Move that entry (or entries) under the
-				 * bridge resource and try again.
-				 */
-				if (reparent_resources(pr, res) == 0)
-					continue;
-			}
-			printk(KERN_ERR "PCI: Cannot allocate resource region "
-			       "%d of PCI bridge %d\n", i, bus->number);
-			if (pci_relocate_bridge_resource(bus, i))
-				bus->resource[i] = NULL;
-		}
-		pcibios_allocate_bus_resources(&bus->children);
-	}
-}
-
-/*
- * Reparent resource children of pr that conflict with res
- * under res, and make res replace those children.
- */
-static int __init
-reparent_resources(struct resource *parent, struct resource *res)
-{
-	struct resource *p, **pp;
-	struct resource **firstpp = NULL;
-
-	for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
-		if (p->end < res->start)
-			continue;
-		if (res->end < p->start)
-			break;
-		if (p->start < res->start || p->end > res->end)
-			return -1;	/* not completely contained */
-		if (firstpp == NULL)
-			firstpp = pp;
-	}
-	if (firstpp == NULL)
-		return -1;	/* didn't find any conflicting entries? */
-	res->parent = parent;
-	res->child = *firstpp;
-	res->sibling = *pp;
-	*firstpp = res;
-	*pp = NULL;
-	for (p = res->child; p != NULL; p = p->sibling) {
-		p->parent = res;
-		DBG(KERN_INFO "PCI: reparented %s [%llx..%llx] under %s\n",
-			p->name, (unsigned long long)p->start,
-			(unsigned long long)p->end, res->name);
-	}
-	return 0;
-}
-
-/*
- * A bridge has been allocated a range which is outside the range
- * of its parent bridge, so it needs to be moved.
- */
-static int __init
-pci_relocate_bridge_resource(struct pci_bus *bus, int i)
-{
-	struct resource *res, *pr, *conflict;
-	unsigned long try, size;
-	int j;
-	struct pci_bus *parent = bus->parent;
-
-	if (parent == NULL) {
-		/* shouldn't ever happen */
-		printk(KERN_ERR "PCI: can't move host bridge resource\n");
-		return -1;
-	}
-	res = bus->resource[i];
-	if (res == NULL)
-		return -1;
-	pr = NULL;
-	for (j = 0; j < 4; j++) {
-		struct resource *r = parent->resource[j];
-		if (!r)
-			continue;
-		if ((res->flags ^ r->flags) & (IORESOURCE_IO | IORESOURCE_MEM))
-			continue;
-		if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH)) {
-			pr = r;
-			break;
-		}
-		if (res->flags & IORESOURCE_PREFETCH)
-			pr = r;
-	}
-	if (pr == NULL)
-		return -1;
-	size = res->end - res->start;
-	if (pr->start > pr->end || size > pr->end - pr->start)
-		return -1;
-	try = pr->end;
-	for (;;) {
-		res->start = try - size;
-		res->end = try;
-		if (probe_resource(bus->parent, pr, res, &conflict) == 0)
-			break;
-		if (conflict->start <= pr->start + size)
-			return -1;
-		try = conflict->start - 1;
-	}
-	if (request_resource(pr, res)) {
-		DBG(KERN_ERR "PCI: huh? couldn't move to %llx..%llx\n",
-			(unsigned long long)res->start,
-			(unsigned long long)res->end);
-		return -1;		/* "can't happen" */
-	}
-	update_bridge_base(bus, i);
-	printk(KERN_INFO "PCI: bridge %d resource %d moved to %llx..%llx\n",
-		bus->number, i, (unsigned long long)res->start,
-		(unsigned long long)res->end);
-	return 0;
-}
-
-static int __init
-probe_resource(struct pci_bus *parent, struct resource *pr,
-	       struct resource *res, struct resource **conflict)
-{
-	struct pci_bus *bus;
-	struct pci_dev *dev;
-	struct resource *r;
-	int i;
-
-	for (r = pr->child; r != NULL; r = r->sibling) {
-		if (r->end >= res->start && res->end >= r->start) {
-			*conflict = r;
-			return 1;
-		}
-	}
-	list_for_each_entry(bus, &parent->children, node) {
-		for (i = 0; i < 4; ++i) {
-			if ((r = bus->resource[i]) == NULL)
-				continue;
-			if (!r->flags || r->start > r->end || r == res)
-				continue;
-			if (pci_find_parent_resource(bus->self, r) != pr)
-				continue;
-			if (r->end >= res->start && res->end >= r->start) {
-				*conflict = r;
-				return 1;
-			}
-		}
-	}
-	list_for_each_entry(dev, &parent->devices, bus_list) {
-		for (i = 0; i < 6; ++i) {
-			r = &dev->resource[i];
-			if (!r->flags || (r->flags & IORESOURCE_UNSET))
-				continue;
-			if (pci_find_parent_resource(dev, r) != pr)
-				continue;
-			if (r->end >= res->start && res->end >= r->start) {
-				*conflict = r;
-				return 1;
-			}
-		}
-	}
-	return 0;
-}
-
-static void __init
-update_bridge_base(struct pci_bus *bus, int i)
-{
-	struct resource *res = bus->resource[i];
-	u8 io_base_lo, io_limit_lo;
-	u16 mem_base, mem_limit;
-	u16 cmd;
-	unsigned long start, end, off;
-	struct pci_dev *dev = bus->self;
-	struct pci_controller *hose = dev->sysdata;
-
-	if (!hose) {
-		printk("update_bridge_base: no hose?\n");
-		return;
-	}
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	pci_write_config_word(dev, PCI_COMMAND,
-			      cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY));
-	if (res->flags & IORESOURCE_IO) {
-		off = (unsigned long) hose->io_base_virt - isa_io_base;
-		start = res->start - off;
-		end = res->end - off;
-		io_base_lo = (start >> 8) & PCI_IO_RANGE_MASK;
-		io_limit_lo = (end >> 8) & PCI_IO_RANGE_MASK;
-		if (end > 0xffff) {
-			pci_write_config_word(dev, PCI_IO_BASE_UPPER16,
-					      start >> 16);
-			pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16,
-					      end >> 16);
-			io_base_lo |= PCI_IO_RANGE_TYPE_32;
-		} else
-			io_base_lo |= PCI_IO_RANGE_TYPE_16;
-		pci_write_config_byte(dev, PCI_IO_BASE, io_base_lo);
-		pci_write_config_byte(dev, PCI_IO_LIMIT, io_limit_lo);
-
-	} else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
-		   == IORESOURCE_MEM) {
-		off = hose->pci_mem_offset;
-		mem_base = ((res->start - off) >> 16) & PCI_MEMORY_RANGE_MASK;
-		mem_limit = ((res->end - off) >> 16) & PCI_MEMORY_RANGE_MASK;
-		pci_write_config_word(dev, PCI_MEMORY_BASE, mem_base);
-		pci_write_config_word(dev, PCI_MEMORY_LIMIT, mem_limit);
-
-	} else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
-		   == (IORESOURCE_MEM | IORESOURCE_PREFETCH)) {
-		off = hose->pci_mem_offset;
-		mem_base = ((res->start - off) >> 16) & PCI_PREF_RANGE_MASK;
-		mem_limit = ((res->end - off) >> 16) & PCI_PREF_RANGE_MASK;
-		pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, mem_base);
-		pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, mem_limit);
-
-	} else {
-		DBG(KERN_ERR "PCI: ugh, bridge %s res %d has flags=%lx\n",
-		    pci_name(dev), i, res->flags);
-	}
-	pci_write_config_word(dev, PCI_COMMAND, cmd);
-}
-
-static inline void alloc_resource(struct pci_dev *dev, int idx)
-{
-	struct resource *pr, *r = &dev->resource[idx];
-
-	DBG("PCI:%s: Resource %d: %016llx-%016llx (f=%lx)\n",
-	    pci_name(dev), idx, (unsigned long long)r->start,
-	    (unsigned long long)r->end, r->flags);
-	pr = pci_find_parent_resource(dev, r);
-	if (!pr || request_resource(pr, r) < 0) {
-		printk(KERN_ERR "PCI: Cannot allocate resource region %d"
-		       " of device %s\n", idx, pci_name(dev));
-		if (pr)
-			DBG("PCI:  parent is %p: %016llx-%016llx (f=%lx)\n",
-				pr, (unsigned long long)pr->start,
-				(unsigned long long)pr->end, pr->flags);
-		/* We'll assign a new address later */
-		r->flags |= IORESOURCE_UNSET;
-		r->end -= r->start;
-		r->start = 0;
-	}
-}
-
-static void __init
-pcibios_allocate_resources(int pass)
-{
-	struct pci_dev *dev = NULL;
-	int idx, disabled;
-	u16 command;
-	struct resource *r;
-
-	for_each_pci_dev(dev) {
-		pci_read_config_word(dev, PCI_COMMAND, &command);
-		for (idx = 0; idx < 6; idx++) {
-			r = &dev->resource[idx];
-			if (r->parent)		/* Already allocated */
-				continue;
-			if (!r->flags || (r->flags & IORESOURCE_UNSET))
-				continue;	/* Not assigned at all */
-			if (r->flags & IORESOURCE_IO)
-				disabled = !(command & PCI_COMMAND_IO);
-			else
-				disabled = !(command & PCI_COMMAND_MEMORY);
-			if (pass == disabled)
-				alloc_resource(dev, idx);
-		}
-		if (pass)
-			continue;
-		r = &dev->resource[PCI_ROM_RESOURCE];
-		if (r->flags & IORESOURCE_ROM_ENABLE) {
-			/* Turn the ROM off, leave the resource region, but keep it unregistered. */
-			u32 reg;
-			DBG("PCI: Switching off ROM of %s\n", pci_name(dev));
-			r->flags &= ~IORESOURCE_ROM_ENABLE;
-			pci_read_config_dword(dev, dev->rom_base_reg, &reg);
-			pci_write_config_dword(dev, dev->rom_base_reg,
-					       reg & ~PCI_ROM_ADDRESS_ENABLE);
-		}
-	}
-}
-
-static void __init
-pcibios_assign_resources(void)
-{
-	struct pci_dev *dev = NULL;
-	int idx;
-	struct resource *r;
-
-	for_each_pci_dev(dev) {
-		int class = dev->class >> 8;
-
-		/* Don't touch classless devices and host bridges */
-		if (!class || class == PCI_CLASS_BRIDGE_HOST)
-			continue;
-
-		for (idx = 0; idx < 6; idx++) {
-			r = &dev->resource[idx];
-
-			/*
-			 * We shall assign a new address to this resource,
-			 * either because the BIOS (sic) forgot to do so
-			 * or because we have decided the old address was
-			 * unusable for some reason.
-			 */
-			if ((r->flags & IORESOURCE_UNSET) && r->end &&
-			    (!ppc_md.pcibios_enable_device_hook ||
-			     !ppc_md.pcibios_enable_device_hook(dev, 1))) {
-				r->flags &= ~IORESOURCE_UNSET;
-				pci_assign_resource(dev, idx);
-			}
-		}
-
-#if 0 /* don't assign ROMs */
-		r = &dev->resource[PCI_ROM_RESOURCE];
-		r->end -= r->start;
-		r->start = 0;
-		if (r->end)
-			pci_assign_resource(dev, PCI_ROM_RESOURCE);
-#endif
-	}
-}
-
-
-static int next_controller_index;
-
-struct pci_controller * __init
-pcibios_alloc_controller(void)
-{
-	struct pci_controller *hose;
-
-	hose = (struct pci_controller *)alloc_bootmem(sizeof(*hose));
-	memset(hose, 0, sizeof(struct pci_controller));
-
-	*hose_tail = hose;
-	hose_tail = &hose->next;
-
-	hose->index = next_controller_index++;
-
-	return hose;
-}
-
-void pcibios_make_OF_bus_map(void)
-{
-}
-
-static int __init
-pcibios_init(void)
-{
-	struct pci_controller *hose;
-	struct pci_bus *bus;
-	int next_busno;
-
-	printk(KERN_INFO "PCI: Probing PCI hardware\n");
-
-	/* Scan all of the recorded PCI controllers.  */
-	for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
-		if (pci_assign_all_buses)
-			hose->first_busno = next_busno;
-		hose->last_busno = 0xff;
-		bus = pci_scan_bus(hose->first_busno, hose->ops, hose);
-		hose->last_busno = bus->subordinate;
-		if (pci_assign_all_buses || next_busno <= hose->last_busno)
-			next_busno = hose->last_busno + pcibios_assign_bus_offset;
-	}
-	pci_bus_count = next_busno;
-
-	/* OpenFirmware based machines need a map of OF bus
-	 * numbers vs. kernel bus numbers since we may have to
-	 * remap them.
-	 */
-	if (pci_assign_all_buses && have_of)
-		pcibios_make_OF_bus_map();
-
-	/* Do machine dependent PCI interrupt routing */
-	if (ppc_md.pci_swizzle && ppc_md.pci_map_irq)
-		pci_fixup_irqs(ppc_md.pci_swizzle, ppc_md.pci_map_irq);
-
-	/* Call machine dependent fixup */
-	if (ppc_md.pcibios_fixup)
-		ppc_md.pcibios_fixup();
-
-	/* Allocate and assign resources */
-	pcibios_allocate_bus_resources(&pci_root_buses);
-	pcibios_allocate_resources(0);
-	pcibios_allocate_resources(1);
-	pcibios_assign_resources();
-
-	/* Call machine dependent post-init code */
-	if (ppc_md.pcibios_after_init)
-		ppc_md.pcibios_after_init();
-
-	return 0;
-}
-
-subsys_initcall(pcibios_init);
-
-unsigned char __init
-common_swizzle(struct pci_dev *dev, unsigned char *pinp)
-{
-	struct pci_controller *hose = dev->sysdata;
-
-	if (dev->bus->number != hose->first_busno) {
-		u8 pin = *pinp;
-		do {
-			pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
-			/* Move up the chain of bridges. */
-			dev = dev->bus->self;
-		} while (dev->bus->self);
-		*pinp = pin;
-
-		/* The slot is the idsel of the last bridge. */
-	}
-	return PCI_SLOT(dev->devfn);
-}
-
-unsigned long resource_fixup(struct pci_dev * dev, struct resource * res,
-			     unsigned long start, unsigned long size)
-{
-	return start;
-}
-
-void __init pcibios_fixup_bus(struct pci_bus *bus)
-{
-	struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
-	unsigned long io_offset;
-	struct resource *res;
-	int i;
-
-	io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
-	if (bus->parent == NULL) {
-		/* This is a host bridge - fill in its resources */
-		hose->bus = bus;
-
-		bus->resource[0] = res = &hose->io_resource;
-		if (!res->flags) {
-			if (io_offset)
-				printk(KERN_ERR "I/O resource not set for host"
-				       " bridge %d\n", hose->index);
-			res->start = 0;
-			res->end = IO_SPACE_LIMIT;
-			res->flags = IORESOURCE_IO;
-		}
-		res->start += io_offset;
-		res->end += io_offset;
-
-		for (i = 0; i < 3; ++i) {
-			res = &hose->mem_resources[i];
-			if (!res->flags) {
-				if (i > 0)
-					continue;
-				printk(KERN_ERR "Memory resource not set for "
-				       "host bridge %d\n", hose->index);
-				res->start = hose->pci_mem_offset;
-				res->end = ~0U;
-				res->flags = IORESOURCE_MEM;
-			}
-			bus->resource[i+1] = res;
-		}
-	} else {
-		/* This is a subordinate bridge */
-		pci_read_bridge_bases(bus);
-
-		for (i = 0; i < 4; ++i) {
-			if ((res = bus->resource[i]) == NULL)
-				continue;
-			if (!res->flags)
-				continue;
-			if (io_offset && (res->flags & IORESOURCE_IO)) {
-				res->start += io_offset;
-				res->end += io_offset;
-			} else if (hose->pci_mem_offset
-				   && (res->flags & IORESOURCE_MEM)) {
-				res->start += hose->pci_mem_offset;
-				res->end += hose->pci_mem_offset;
-			}
-		}
-	}
-
-	if (ppc_md.pcibios_fixup_bus)
-		ppc_md.pcibios_fixup_bus(bus);
-}
-
-char __init *pcibios_setup(char *str)
-{
-	return str;
-}
-
-/* the next one is stolen from the alpha port... */
-void __init
-pcibios_update_irq(struct pci_dev *dev, int irq)
-{
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-	/* XXX FIXME - update OF device tree node interrupt property */
-}
-
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
-	if (ppc_md.pcibios_enable_device_hook)
-		if (ppc_md.pcibios_enable_device_hook(dev, 0))
-			return -EINVAL;
-
-	return pci_enable_resources(dev, mask);
-}
-
-struct pci_controller*
-pci_bus_to_hose(int bus)
-{
-	struct pci_controller* hose = hose_head;
-
-	for (; hose; hose = hose->next)
-		if (bus >= hose->first_busno && bus <= hose->last_busno)
-			return hose;
-	return NULL;
-}
-
-void __iomem *
-pci_bus_io_base(unsigned int bus)
-{
-	struct pci_controller *hose;
-
-	hose = pci_bus_to_hose(bus);
-	if (!hose)
-		return NULL;
-	return hose->io_base_virt;
-}
-
-unsigned long
-pci_bus_io_base_phys(unsigned int bus)
-{
-	struct pci_controller *hose;
-
-	hose = pci_bus_to_hose(bus);
-	if (!hose)
-		return 0;
-	return hose->io_base_phys;
-}
-
-unsigned long
-pci_bus_mem_base_phys(unsigned int bus)
-{
-	struct pci_controller *hose;
-
-	hose = pci_bus_to_hose(bus);
-	if (!hose)
-		return 0;
-	return hose->pci_mem_offset;
-}
-
-unsigned long
-pci_resource_to_bus(struct pci_dev *pdev, struct resource *res)
-{
-	/* Hack alert again ! See comments in chrp_pci.c
-	 */
-	struct pci_controller* hose =
-		(struct pci_controller *)pdev->sysdata;
-	if (hose && res->flags & IORESOURCE_MEM)
-		return res->start - hose->pci_mem_offset;
-	/* We may want to do something with IOs here... */
-	return res->start;
-}
-
-
-static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
-					       resource_size_t *offset,
-					       enum pci_mmap_state mmap_state)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-	unsigned long io_offset = 0;
-	int i, res_bit;
-
-	if (hose == 0)
-		return NULL;		/* should never happen */
-
-	/* If memory, add on the PCI bridge address offset */
-	if (mmap_state == pci_mmap_mem) {
-#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
-		*offset += hose->pci_mem_offset;
-#endif
-		res_bit = IORESOURCE_MEM;
-	} else {
-		io_offset = hose->io_base_virt - ___IO_BASE;
-		*offset += io_offset;
-		res_bit = IORESOURCE_IO;
-	}
-
-	/*
-	 * Check that the offset requested corresponds to one of the
-	 * resources of the device.
-	 */
-	for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
-		struct resource *rp = &dev->resource[i];
-		int flags = rp->flags;
-
-		/* treat ROM as memory (should be already) */
-		if (i == PCI_ROM_RESOURCE)
-			flags |= IORESOURCE_MEM;
-
-		/* Active and same type? */
-		if ((flags & res_bit) == 0)
-			continue;
-
-		/* In the range of this resource? */
-		if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end)
-			continue;
-
-		/* found it! construct the final physical address */
-		if (mmap_state == pci_mmap_io)
-			*offset += hose->io_base_phys - io_offset;
-		return rp;
-	}
-
-	return NULL;
-}
-
-/*
- * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
- * device mapping.
- */
-static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
-				      pgprot_t protection,
-				      enum pci_mmap_state mmap_state,
-				      int write_combine)
-{
-	unsigned long prot = pgprot_val(protection);
-
-	/* Write combine is always 0 on non-memory space mappings. On
-	 * memory space, if the user didn't pass 1, we check for a
-	 * "prefetchable" resource. This is a bit hackish, but we use
-	 * this to workaround the inability of /sysfs to provide a write
-	 * combine bit
-	 */
-	if (mmap_state != pci_mmap_mem)
-		write_combine = 0;
-	else if (write_combine == 0) {
-		if (rp->flags & IORESOURCE_PREFETCH)
-			write_combine = 1;
-	}
-
-	/* XXX would be nice to have a way to ask for write-through */
-	prot |= _PAGE_NO_CACHE;
-	if (write_combine)
-		prot &= ~_PAGE_GUARDED;
-	else
-		prot |= _PAGE_GUARDED;
-
-	printk("PCI map for %s:%llx, prot: %lx\n", pci_name(dev),
-		(unsigned long long)rp->start, prot);
-
-	return __pgprot(prot);
-}
-
-/*
- * This one is used by /dev/mem and fbdev who have no clue about the
- * PCI device, it tries to find the PCI device first and calls the
- * above routine
- */
-pgprot_t pci_phys_mem_access_prot(struct file *file,
-				  unsigned long pfn,
-				  unsigned long size,
-				  pgprot_t protection)
-{
-	struct pci_dev *pdev = NULL;
-	struct resource *found = NULL;
-	unsigned long prot = pgprot_val(protection);
-	unsigned long offset = pfn << PAGE_SHIFT;
-	int i;
-
-	if (page_is_ram(pfn))
-		return prot;
-
-	prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
-
-	for_each_pci_dev(pdev) {
-		for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
-			struct resource *rp = &pdev->resource[i];
-			int flags = rp->flags;
-
-			/* Active and same type? */
-			if ((flags & IORESOURCE_MEM) == 0)
-				continue;
-			/* In the range of this resource? */
-			if (offset < (rp->start & PAGE_MASK) ||
-			    offset > rp->end)
-				continue;
-			found = rp;
-			break;
-		}
-		if (found)
-			break;
-	}
-	if (found) {
-		if (found->flags & IORESOURCE_PREFETCH)
-			prot &= ~_PAGE_GUARDED;
-		pci_dev_put(pdev);
-	}
-
-	DBG("non-PCI map for %lx, prot: %lx\n", offset, prot);
-
-	return __pgprot(prot);
-}
-
-
-/*
- * Perform the actual remap of the pages for a PCI device mapping, as
- * appropriate for this architecture.  The region in the process to map
- * is described by vm_start and vm_end members of VMA, the base physical
- * address is found in vm_pgoff.
- * The pci device structure is provided so that architectures may make mapping
- * decisions on a per-device or per-bus basis.
- *
- * Returns a negative error code on failure, zero on success.
- */
-int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state,
-			int write_combine)
-{
-	resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
-	struct resource *rp;
-	int ret;
-
-	rp = __pci_mmap_make_offset(dev, &offset, mmap_state);
-	if (rp == NULL)
-		return -EINVAL;
-
-	vma->vm_pgoff = offset >> PAGE_SHIFT;
-	vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
-						  vma->vm_page_prot,
-						  mmap_state, write_combine);
-
-	ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
-			       vma->vm_end - vma->vm_start, vma->vm_page_prot);
-
-	return ret;
-}
-
-/* Obsolete functions. Should be removed once the symbios driver
- * is fixed
- */
-unsigned long
-phys_to_bus(unsigned long pa)
-{
-	struct pci_controller *hose;
-	int i;
-
-	for (hose = hose_head; hose; hose = hose->next) {
-		for (i = 0; i < 3; ++i) {
-			if (pa >= hose->mem_resources[i].start
-			    && pa <= hose->mem_resources[i].end) {
-				/*
-				 * XXX the hose->pci_mem_offset really
-				 * only applies to mem_resources[0].
-				 * We need a way to store an offset for
-				 * the others.  -- paulus
-				 */
-				if (i == 0)
-					pa -= hose->pci_mem_offset;
-				return pa;
-			}
-		}
-	}
-	/* hmmm, didn't find it */
-	return 0;
-}
-
-unsigned long
-pci_phys_to_bus(unsigned long pa, int busnr)
-{
-	struct pci_controller* hose = pci_bus_to_hose(busnr);
-	if (!hose)
-		return pa;
-	return pa - hose->pci_mem_offset;
-}
-
-unsigned long
-pci_bus_to_phys(unsigned int ba, int busnr)
-{
-	struct pci_controller* hose = pci_bus_to_hose(busnr);
-	if (!hose)
-		return ba;
-	return ba + hose->pci_mem_offset;
-}
-
-/* Provide information on locations of various I/O regions in physical
- * memory.  Do this on a per-card basis so that we choose the right
- * root bridge.
- * Note that the returned IO or memory base is a physical address
- */
-
-long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
-{
-	struct pci_controller* hose;
-	long result = -EOPNOTSUPP;
-
-	hose = pci_bus_to_hose(bus);
-	if (!hose)
-		return -ENODEV;
-
-	switch (which) {
-	case IOBASE_BRIDGE_NUMBER:
-		return (long)hose->first_busno;
-	case IOBASE_MEMORY:
-		return (long)hose->pci_mem_offset;
-	case IOBASE_IO:
-		return (long)hose->io_base_phys;
-	case IOBASE_ISA_IO:
-		return (long)isa_io_base;
-	case IOBASE_ISA_MEM:
-		return (long)isa_mem_base;
-	}
-
-	return result;
-}
-
-void pci_resource_to_user(const struct pci_dev *dev, int bar,
-			  const struct resource *rsrc,
-			  resource_size_t *start, resource_size_t *end)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-	resource_size_t offset = 0;
-
-	if (hose == NULL)
-		return;
-
-	if (rsrc->flags & IORESOURCE_IO)
-		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
-
-	/* We pass a fully fixed up address to userland for MMIO instead of
-	 * a BAR value because X is lame and expects to be able to use that
-	 * to pass to /dev/mem !
-	 *
-	 * That means that we'll have potentially 64 bits values where some
-	 * userland apps only expect 32 (like X itself since it thinks only
-	 * Sparc has 64 bits MMIO) but if we don't do that, we break it on
-	 * 32 bits CHRPs :-(
-	 *
-	 * Hopefully, the sysfs insterface is immune to that gunk. Once X
-	 * has been fixed (and the fix spread enough), we can re-enable the
-	 * 2 lines below and pass down a BAR value to userland. In that case
-	 * we'll also have to re-enable the matching code in
-	 * __pci_mmap_make_offset().
-	 *
-	 * BenH.
-	 */
-#if 0
-	else if (rsrc->flags & IORESOURCE_MEM)
-		offset = hose->pci_mem_offset;
-#endif
-
-	*start = rsrc->start - offset;
-	*end = rsrc->end - offset;
-}
-
-void __init pci_init_resource(struct resource *res, resource_size_t start,
-			      resource_size_t end, int flags, char *name)
-{
-	res->start = start;
-	res->end = end;
-	res->flags = flags;
-	res->name = name;
-	res->parent = NULL;
-	res->sibling = NULL;
-	res->child = NULL;
-}
-
-void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
-{
-	resource_size_t start = pci_resource_start(dev, bar);
-	resource_size_t len = pci_resource_len(dev, bar);
-	unsigned long flags = pci_resource_flags(dev, bar);
-
-	if (!len)
-		return NULL;
-	if (max && len > max)
-		len = max;
-	if (flags & IORESOURCE_IO)
-		return ioport_map(start, len);
-	if (flags & IORESOURCE_MEM)
-		/* Not checking IORESOURCE_CACHEABLE because PPC does
-		 * not currently distinguish between ioremap and
-		 * ioremap_nocache.
-		 */
-		return ioremap(start, len);
-	/* What? */
-	return NULL;
-}
-
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr)
-{
-	/* Nothing to do */
-}
-EXPORT_SYMBOL(pci_iomap);
-EXPORT_SYMBOL(pci_iounmap);
-
-unsigned long pci_address_to_pio(phys_addr_t address)
-{
-	struct pci_controller* hose = hose_head;
-
-	for (; hose; hose = hose->next) {
-		unsigned int size = hose->io_resource.end -
-			hose->io_resource.start + 1;
-		if (address >= hose->io_base_phys &&
-		    address < (hose->io_base_phys + size)) {
-			unsigned long base =
-				(unsigned long)hose->io_base_virt - _IO_BASE;
-			return base + (address - hose->io_base_phys);
-		}
-	}
-	return (unsigned int)-1;
-}
-EXPORT_SYMBOL(pci_address_to_pio);
-
-/*
- * Null PCI config access functions, for the case when we can't
- * find a hose.
- */
-#define NULL_PCI_OP(rw, size, type)					\
-static int								\
-null_##rw##_config_##size(struct pci_dev *dev, int offset, type val)	\
-{									\
-	return PCIBIOS_DEVICE_NOT_FOUND;    				\
-}
-
-static int
-null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		 int len, u32 *val)
-{
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static int
-null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		  int len, u32 val)
-{
-	return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-static struct pci_ops null_pci_ops =
-{
-	null_read_config,
-	null_write_config
-};
-
-/*
- * These functions are used early on before PCI scanning is done
- * and all of the pci_dev and pci_bus structures have been created.
- */
-static struct pci_bus *
-fake_pci_bus(struct pci_controller *hose, int busnr)
-{
-	static struct pci_bus bus;
-
-	if (hose == 0) {
-		hose = pci_bus_to_hose(busnr);
-		if (hose == 0)
-			printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
-	}
-	bus.number = busnr;
-	bus.sysdata = hose;
-	bus.ops = hose? hose->ops: &null_pci_ops;
-	return &bus;
-}
-
-#define EARLY_PCI_OP(rw, size, type)					\
-int early_##rw##_config_##size(struct pci_controller *hose, int bus,	\
-			       int devfn, int offset, type value)	\
-{									\
-	return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus),	\
-					    devfn, offset, value);	\
-}
-
-EARLY_PCI_OP(read, byte, u8 *)
-EARLY_PCI_OP(read, word, u16 *)
-EARLY_PCI_OP(read, dword, u32 *)
-EARLY_PCI_OP(write, byte, u8)
-EARLY_PCI_OP(write, word, u16)
-EARLY_PCI_OP(write, dword, u32)
diff --git a/arch/ppc/kernel/ppc-stub.c b/arch/ppc/kernel/ppc-stub.c
deleted file mode 100644
index 5f9ee7bb67ec..000000000000
--- a/arch/ppc/kernel/ppc-stub.c
+++ /dev/null
@@ -1,866 +0,0 @@
-/*
- * ppc-stub.c:  KGDB support for the Linux kernel.
- *
- * adapted from arch/sparc/kernel/sparc-stub.c for the PowerPC
- * some stuff borrowed from Paul Mackerras' xmon
- * Copyright (C) 1998 Michael AK Tesch (tesch@cs.wisc.edu)
- *
- * Modifications to run under Linux
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- *
- * This file originally came from the gdb sources, and the
- * copyright notices have been retained below.
- */
-
-/****************************************************************************
-
-		THIS SOFTWARE IS NOT COPYRIGHTED
-
-   HP offers the following for use in the public domain.  HP makes no
-   warranty with regard to the software or its performance and the
-   user accepts the software "AS IS" with all faults.
-
-   HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
-   TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-
-****************************************************************************/
-
-/****************************************************************************
- *  Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $
- *
- *  Module name: remcom.c $
- *  Revision: 1.34 $
- *  Date: 91/03/09 12:29:49 $
- *  Contributor:     Lake Stevens Instrument Division$
- *
- *  Description:     low level support for gdb debugger. $
- *
- *  Considerations:  only works on target hardware $
- *
- *  Written by:      Glenn Engel $
- *  ModuleState:     Experimental $
- *
- *  NOTES:           See Below $
- *
- *  Modified for SPARC by Stu Grossman, Cygnus Support.
- *
- *  This code has been extensively tested on the Fujitsu SPARClite demo board.
- *
- *  To enable debugger support, two things need to happen.  One, a
- *  call to set_debug_traps() is necessary in order to allow any breakpoints
- *  or error conditions to be properly intercepted and reported to gdb.
- *  Two, a breakpoint needs to be generated to begin communication.  This
- *  is most easily accomplished by a call to breakpoint().  Breakpoint()
- *  simulates a breakpoint by executing a trap #1.
- *
- *************
- *
- *    The following gdb commands are supported:
- *
- * command          function		          Return value
- *
- *    g             return the value of the CPU registers  hex data or ENN
- *    G             set the value of the CPU registers     OK or ENN
- *    qOffsets      Get section offsets.  Reply is Text=xxx;Data=yyy;Bss=zzz
- *
- *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
- *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
- *
- *    c             Resume at current address              SNN   ( signal NN)
- *    cAA..AA       Continue at address AA..AA             SNN
- *
- *    s             Step one instruction                   SNN
- *    sAA..AA       Step one instruction from AA..AA       SNN
- *
- *    k             kill
- *
- *    ?             What was the last sigval ?             SNN   (signal NN)
- *
- *    bBB..BB	    Set baud rate to BB..BB		   OK or BNN, then sets
- *							   baud rate
- *
- * All commands and responses are sent with a packet which includes a
- * checksum.  A packet consists of
- *
- * $<packet info>#<checksum>.
- *
- * where
- * <packet info> :: <characters representing the command or response>
- * <checksum>    :: <two hex digits computed as modulo 256 sum of <packetinfo>>
- *
- * When a packet is received, it is first acknowledged with either '+' or '-'.
- * '+' indicates a successful transfer.  '-' indicates a failed transfer.
- *
- * Example:
- *
- * Host:                  Reply:
- * $m0,10#2a               +$00010203040506070809101112131415#42
- *
- ****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/init.h>
-#include <linux/sysrq.h>
-
-#include <asm/cacheflush.h>
-#include <asm/system.h>
-#include <asm/signal.h>
-#include <asm/kgdb.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-
-void breakinst(void);
-
-/*
- * BUFMAX defines the maximum number of characters in inbound/outbound buffers
- * at least NUMREGBYTES*2 are needed for register packets
- */
-#define BUFMAX 2048
-static char remcomInBuffer[BUFMAX];
-static char remcomOutBuffer[BUFMAX];
-
-static int initialized;
-static int kgdb_active;
-static int kgdb_started;
-static u_int fault_jmp_buf[100];
-static int kdebug;
-
-
-static const char hexchars[]="0123456789abcdef";
-
-/* Place where we save old trap entries for restoration - sparc*/
-/* struct tt_entry kgdb_savettable[256]; */
-/* typedef void (*trapfunc_t)(void); */
-
-static void kgdb_fault_handler(struct pt_regs *regs);
-static int handle_exception (struct pt_regs *regs);
-
-#if 0
-/* Install an exception handler for kgdb */
-static void exceptionHandler(int tnum, unsigned int *tfunc)
-{
-	/* We are dorking with a live trap table, all irqs off */
-}
-#endif
-
-int
-kgdb_setjmp(long *buf)
-{
-	asm ("mflr 0; stw 0,0(%0);"
-	     "stw 1,4(%0); stw 2,8(%0);"
-	     "mfcr 0; stw 0,12(%0);"
-	     "stmw 13,16(%0)"
-	     : : "r" (buf));
-	/* XXX should save fp regs as well */
-	return 0;
-}
-void
-kgdb_longjmp(long *buf, int val)
-{
-	if (val == 0)
-		val = 1;
-	asm ("lmw 13,16(%0);"
-	     "lwz 0,12(%0); mtcrf 0x38,0;"
-	     "lwz 0,0(%0); lwz 1,4(%0); lwz 2,8(%0);"
-	     "mtlr 0; mr 3,%1"
-	     : : "r" (buf), "r" (val));
-}
-/* Convert ch from a hex digit to an int */
-static int
-hex(unsigned char ch)
-{
-	if (ch >= 'a' && ch <= 'f')
-		return ch-'a'+10;
-	if (ch >= '0' && ch <= '9')
-		return ch-'0';
-	if (ch >= 'A' && ch <= 'F')
-		return ch-'A'+10;
-	return -1;
-}
-
-/* Convert the memory pointed to by mem into hex, placing result in buf.
- * Return a pointer to the last char put in buf (null), in case of mem fault,
- * return 0.
- */
-static unsigned char *
-mem2hex(const char *mem, char *buf, int count)
-{
-	unsigned char ch;
-	unsigned short tmp_s;
-	unsigned long tmp_l;
-
-	if (kgdb_setjmp((long*)fault_jmp_buf) == 0) {
-		debugger_fault_handler = kgdb_fault_handler;
-
-		/* Accessing 16 bit and 32 bit objects in a single
-		** load instruction is required to avoid bad side
-		** effects for some IO registers.
-		*/
-
-		if ((count == 2) && (((long)mem & 1) == 0)) {
-			tmp_s = *(unsigned short *)mem;
-			mem += 2;
-			*buf++ = hexchars[(tmp_s >> 12) & 0xf];
-			*buf++ = hexchars[(tmp_s >> 8) & 0xf];
-			*buf++ = hexchars[(tmp_s >> 4) & 0xf];
-			*buf++ = hexchars[tmp_s & 0xf];
-
-		} else if ((count == 4) && (((long)mem & 3) == 0)) {
-			tmp_l = *(unsigned int *)mem;
-			mem += 4;
-			*buf++ = hexchars[(tmp_l >> 28) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 24) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 20) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 16) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 12) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 8) & 0xf];
-			*buf++ = hexchars[(tmp_l >> 4) & 0xf];
-			*buf++ = hexchars[tmp_l & 0xf];
-
-		} else {
-			while (count-- > 0) {
-				ch = *mem++;
-				*buf++ = hexchars[ch >> 4];
-				*buf++ = hexchars[ch & 0xf];
-			}
-		}
-
-	} else {
-		/* error condition */
-	}
-	debugger_fault_handler = NULL;
-	*buf = 0;
-	return buf;
-}
-
-/* convert the hex array pointed to by buf into binary to be placed in mem
- * return a pointer to the character AFTER the last byte written.
-*/
-static char *
-hex2mem(char *buf, char *mem, int count)
-{
-	unsigned char ch;
-	int i;
-	char *orig_mem;
-	unsigned short tmp_s;
-	unsigned long tmp_l;
-
-	orig_mem = mem;
-
-	if (kgdb_setjmp((long*)fault_jmp_buf) == 0) {
-		debugger_fault_handler = kgdb_fault_handler;
-
-		/* Accessing 16 bit and 32 bit objects in a single
-		** store instruction is required to avoid bad side
-		** effects for some IO registers.
-		*/
-
-		if ((count == 2) && (((long)mem & 1) == 0)) {
-			tmp_s = hex(*buf++) << 12;
-			tmp_s |= hex(*buf++) << 8;
-			tmp_s |= hex(*buf++) << 4;
-			tmp_s |= hex(*buf++);
-
-			*(unsigned short *)mem = tmp_s;
-			mem += 2;
-
-		} else if ((count == 4) && (((long)mem & 3) == 0)) {
-			tmp_l = hex(*buf++) << 28;
-			tmp_l |= hex(*buf++) << 24;
-			tmp_l |= hex(*buf++) << 20;
-			tmp_l |= hex(*buf++) << 16;
-			tmp_l |= hex(*buf++) << 12;
-			tmp_l |= hex(*buf++) << 8;
-			tmp_l |= hex(*buf++) << 4;
-			tmp_l |= hex(*buf++);
-
-			*(unsigned long *)mem = tmp_l;
-			mem += 4;
-
-		} else {
-			for (i=0; i<count; i++) {
-				ch = hex(*buf++) << 4;
-				ch |= hex(*buf++);
-				*mem++ = ch;
-			}
-		}
-
-
-		/*
-		** Flush the data cache, invalidate the instruction cache.
-		*/
-		flush_icache_range((int)orig_mem, (int)orig_mem + count - 1);
-
-	} else {
-		/* error condition */
-	}
-	debugger_fault_handler = NULL;
-	return mem;
-}
-
-/*
- * While we find nice hex chars, build an int.
- * Return number of chars processed.
- */
-static int
-hexToInt(char **ptr, int *intValue)
-{
-	int numChars = 0;
-	int hexValue;
-
-	*intValue = 0;
-
-	if (kgdb_setjmp((long*)fault_jmp_buf) == 0) {
-		debugger_fault_handler = kgdb_fault_handler;
-		while (**ptr) {
-			hexValue = hex(**ptr);
-			if (hexValue < 0)
-				break;
-
-			*intValue = (*intValue << 4) | hexValue;
-			numChars ++;
-
-			(*ptr)++;
-		}
-	} else {
-		/* error condition */
-	}
-	debugger_fault_handler = NULL;
-
-	return (numChars);
-}
-
-/* scan for the sequence $<data>#<checksum> */
-static void
-getpacket(char *buffer)
-{
-	unsigned char checksum;
-	unsigned char xmitcsum;
-	int i;
-	int count;
-	unsigned char ch;
-
-	do {
-		/* wait around for the start character, ignore all other
-		 * characters */
-		while ((ch = (getDebugChar() & 0x7f)) != '$') ;
-
-		checksum = 0;
-		xmitcsum = -1;
-
-		count = 0;
-
-		/* now, read until a # or end of buffer is found */
-		while (count < BUFMAX) {
-			ch = getDebugChar() & 0x7f;
-			if (ch == '#')
-				break;
-			checksum = checksum + ch;
-			buffer[count] = ch;
-			count = count + 1;
-		}
-
-		if (count >= BUFMAX)
-			continue;
-
-		buffer[count] = 0;
-
-		if (ch == '#') {
-			xmitcsum = hex(getDebugChar() & 0x7f) << 4;
-			xmitcsum |= hex(getDebugChar() & 0x7f);
-			if (checksum != xmitcsum)
-				putDebugChar('-');	/* failed checksum */
-			else {
-				putDebugChar('+'); /* successful transfer */
-				/* if a sequence char is present, reply the ID */
-				if (buffer[2] == ':') {
-					putDebugChar(buffer[0]);
-					putDebugChar(buffer[1]);
-					/* remove sequence chars from buffer */
-					count = strlen(buffer);
-					for (i=3; i <= count; i++)
-						buffer[i-3] = buffer[i];
-				}
-			}
-		}
-	} while (checksum != xmitcsum);
-}
-
-/* send the packet in buffer. */
-static void putpacket(unsigned char *buffer)
-{
-	unsigned char checksum;
-	int count;
-	unsigned char ch, recv;
-
-	/* $<packet info>#<checksum>. */
-	do {
-		putDebugChar('$');
-		checksum = 0;
-		count = 0;
-
-		while ((ch = buffer[count])) {
-			putDebugChar(ch);
-			checksum += ch;
-			count += 1;
-		}
-
-		putDebugChar('#');
-		putDebugChar(hexchars[checksum >> 4]);
-		putDebugChar(hexchars[checksum & 0xf]);
-		recv = getDebugChar();
-	} while ((recv & 0x7f) != '+');
-}
-
-static void kgdb_flush_cache_all(void)
-{
-	flush_instruction_cache();
-}
-
-/* Set up exception handlers for tracing and breakpoints
- * [could be called kgdb_init()]
- */
-void set_debug_traps(void)
-{
-#if 0
-	unsigned char c;
-
-	save_and_cli(flags);
-
-	/* In case GDB is started before us, ack any packets (presumably
-	 * "$?#xx") sitting there.
-	 *
-	 * I've found this code causes more problems than it solves,
-	 * so that's why it's commented out.  GDB seems to work fine
-	 * now starting either before or after the kernel   -bwb
-	 */
-
-	while((c = getDebugChar()) != '$');
-	while((c = getDebugChar()) != '#');
-	c = getDebugChar(); /* eat first csum byte */
-	c = getDebugChar(); /* eat second csum byte */
-	putDebugChar('+'); /* ack it */
-#endif
-	debugger = kgdb;
-	debugger_bpt = kgdb_bpt;
-	debugger_sstep = kgdb_sstep;
-	debugger_iabr_match = kgdb_iabr_match;
-	debugger_dabr_match = kgdb_dabr_match;
-
-	initialized = 1;
-}
-
-static void kgdb_fault_handler(struct pt_regs *regs)
-{
-	kgdb_longjmp((long*)fault_jmp_buf, 1);
-}
-
-int kgdb_bpt(struct pt_regs *regs)
-{
-	return handle_exception(regs);
-}
-
-int kgdb_sstep(struct pt_regs *regs)
-{
-	return handle_exception(regs);
-}
-
-void kgdb(struct pt_regs *regs)
-{
-	handle_exception(regs);
-}
-
-int kgdb_iabr_match(struct pt_regs *regs)
-{
-	printk(KERN_ERR "kgdb doesn't support iabr, what?!?\n");
-	return handle_exception(regs);
-}
-
-int kgdb_dabr_match(struct pt_regs *regs)
-{
-	printk(KERN_ERR "kgdb doesn't support dabr, what?!?\n");
-	return handle_exception(regs);
-}
-
-/* Convert the hardware trap type code to a unix signal number. */
-/*
- * This table contains the mapping between PowerPC hardware trap types, and
- * signals, which are primarily what GDB understands.
- */
-static struct hard_trap_info
-{
-	unsigned int tt;		/* Trap type code for powerpc */
-	unsigned char signo;		/* Signal that we map this trap into */
-} hard_trap_info[] = {
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-	{ 0x100, SIGINT  },		/* critical input interrupt */
-	{ 0x200, SIGSEGV },		/* machine check */
-	{ 0x300, SIGSEGV },		/* data storage */
-	{ 0x400, SIGBUS  },		/* instruction storage */
-	{ 0x500, SIGINT  },		/* interrupt */
-	{ 0x600, SIGBUS  },		/* alignment */
-	{ 0x700, SIGILL  },		/* program */
-	{ 0x800, SIGILL  },		/* reserved */
-	{ 0x900, SIGILL  },		/* reserved */
-	{ 0xa00, SIGILL  },		/* reserved */
-	{ 0xb00, SIGILL  },		/* reserved */
-	{ 0xc00, SIGCHLD },		/* syscall */
-	{ 0xd00, SIGILL  },		/* reserved */
-	{ 0xe00, SIGILL  },		/* reserved */
-	{ 0xf00, SIGILL  },		/* reserved */
-	/*
-	** 0x1000  PIT
-	** 0x1010  FIT
-	** 0x1020  watchdog
-	** 0x1100  data TLB miss
-	** 0x1200  instruction TLB miss
-	*/
-	{ 0x2002, SIGTRAP},		/* debug */
-#else
-	{ 0x200, SIGSEGV },		/* machine check */
-	{ 0x300, SIGSEGV },		/* address error (store) */
-	{ 0x400, SIGBUS },		/* instruction bus error */
-	{ 0x500, SIGINT },		/* interrupt */
-	{ 0x600, SIGBUS },		/* alingment */
-	{ 0x700, SIGTRAP },		/* breakpoint trap */
-	{ 0x800, SIGFPE },		/* fpu unavail */
-	{ 0x900, SIGALRM },		/* decrementer */
-	{ 0xa00, SIGILL },		/* reserved */
-	{ 0xb00, SIGILL },		/* reserved */
-	{ 0xc00, SIGCHLD },		/* syscall */
-	{ 0xd00, SIGTRAP },		/* single-step/watch */
-	{ 0xe00, SIGFPE },		/* fp assist */
-#endif
-	{ 0, 0}				/* Must be last */
-
-};
-
-static int computeSignal(unsigned int tt)
-{
-	struct hard_trap_info *ht;
-
-	for (ht = hard_trap_info; ht->tt && ht->signo; ht++)
-		if (ht->tt == tt)
-			return ht->signo;
-
-	return SIGHUP; /* default for things we don't know about */
-}
-
-#define PC_REGNUM 64
-#define SP_REGNUM 1
-
-/*
- * This function does all command processing for interfacing to gdb.
- */
-static int
-handle_exception (struct pt_regs *regs)
-{
-	int sigval;
-	int addr;
-	int length;
-	char *ptr;
-	unsigned int msr;
-
-	/* We don't handle user-mode breakpoints. */
-	if (user_mode(regs))
-		return 0;
-
-	if (debugger_fault_handler) {
-		debugger_fault_handler(regs);
-		panic("kgdb longjump failed!\n");
-	}
-	if (kgdb_active) {
-		printk(KERN_ERR "interrupt while in kgdb, returning\n");
-		return 0;
-	}
-
-	kgdb_active = 1;
-	kgdb_started = 1;
-
-#ifdef KGDB_DEBUG
-	printk("kgdb: entering handle_exception; trap [0x%x]\n",
-			(unsigned int)regs->trap);
-#endif
-
-	kgdb_interruptible(0);
-	lock_kernel();
-	msr = mfmsr();
-	mtmsr(msr & ~MSR_EE);	/* disable interrupts */
-
-	if (regs->nip == (unsigned long)breakinst) {
-		/* Skip over breakpoint trap insn */
-		regs->nip += 4;
-	}
-
-	/* reply to host that an exception has occurred */
-	sigval = computeSignal(regs->trap);
-	ptr = remcomOutBuffer;
-
-	*ptr++ = 'T';
-	*ptr++ = hexchars[sigval >> 4];
-	*ptr++ = hexchars[sigval & 0xf];
-	*ptr++ = hexchars[PC_REGNUM >> 4];
-	*ptr++ = hexchars[PC_REGNUM & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex((char *)&regs->nip, ptr, 4);
-	*ptr++ = ';';
-	*ptr++ = hexchars[SP_REGNUM >> 4];
-	*ptr++ = hexchars[SP_REGNUM & 0xf];
-	*ptr++ = ':';
-	ptr = mem2hex(((char *)regs) + SP_REGNUM*4, ptr, 4);
-	*ptr++ = ';';
-	*ptr++ = 0;
-
-	putpacket(remcomOutBuffer);
-	if (kdebug)
-		printk("remcomOutBuffer: %s\n", remcomOutBuffer);
-
-	/* XXX We may want to add some features dealing with poking the
-	 * XXX page tables, ... (look at sparc-stub.c for more info)
-	 * XXX also required hacking to the gdb sources directly...
-	 */
-
-	while (1) {
-		remcomOutBuffer[0] = 0;
-
-		getpacket(remcomInBuffer);
-		switch (remcomInBuffer[0]) {
-		case '?': /* report most recent signal */
-			remcomOutBuffer[0] = 'S';
-			remcomOutBuffer[1] = hexchars[sigval >> 4];
-			remcomOutBuffer[2] = hexchars[sigval & 0xf];
-			remcomOutBuffer[3] = 0;
-			break;
-#if 0
-		case 'q': /* this screws up gdb for some reason...*/
-		{
-			extern long _start, sdata, __bss_start;
-
-			ptr = &remcomInBuffer[1];
-			if (strncmp(ptr, "Offsets", 7) != 0)
-				break;
-
-			ptr = remcomOutBuffer;
-			sprintf(ptr, "Text=%8.8x;Data=%8.8x;Bss=%8.8x",
-				&_start, &sdata, &__bss_start);
-			break;
-		}
-#endif
-		case 'd':
-			/* toggle debug flag */
-			kdebug ^= 1;
-			break;
-
-		case 'g':	/* return the value of the CPU registers.
-				 * some of them are non-PowerPC names :(
-				 * they are stored in gdb like:
-				 * struct {
-				 *     u32 gpr[32];
-				 *     f64 fpr[32];
-				 *     u32 pc, ps, cnd, lr; (ps=msr)
-				 *     u32 cnt, xer, mq;
-				 * }
-				 */
-		{
-			int i;
-			ptr = remcomOutBuffer;
-			/* General Purpose Regs */
-			ptr = mem2hex((char *)regs, ptr, 32 * 4);
-			/* Floating Point Regs - FIXME */
-			/*ptr = mem2hex((char *), ptr, 32 * 8);*/
-			for(i=0; i<(32*8*2); i++) { /* 2chars/byte */
-				ptr[i] = '0';
-			}
-			ptr += 32*8*2;
-			/* pc, msr, cr, lr, ctr, xer, (mq is unused) */
-			ptr = mem2hex((char *)&regs->nip, ptr, 4);
-			ptr = mem2hex((char *)&regs->msr, ptr, 4);
-			ptr = mem2hex((char *)&regs->ccr, ptr, 4);
-			ptr = mem2hex((char *)&regs->link, ptr, 4);
-			ptr = mem2hex((char *)&regs->ctr, ptr, 4);
-			ptr = mem2hex((char *)&regs->xer, ptr, 4);
-		}
-			break;
-
-		case 'G': /* set the value of the CPU registers */
-		{
-			ptr = &remcomInBuffer[1];
-
-			/*
-			 * If the stack pointer has moved, you should pray.
-			 * (cause only god can help you).
-			 */
-
-			/* General Purpose Regs */
-			hex2mem(ptr, (char *)regs, 32 * 4);
-
-			/* Floating Point Regs - FIXME?? */
-			/*ptr = hex2mem(ptr, ??, 32 * 8);*/
-			ptr += 32*8*2;
-
-			/* pc, msr, cr, lr, ctr, xer, (mq is unused) */
-			ptr = hex2mem(ptr, (char *)&regs->nip, 4);
-			ptr = hex2mem(ptr, (char *)&regs->msr, 4);
-			ptr = hex2mem(ptr, (char *)&regs->ccr, 4);
-			ptr = hex2mem(ptr, (char *)&regs->link, 4);
-			ptr = hex2mem(ptr, (char *)&regs->ctr, 4);
-			ptr = hex2mem(ptr, (char *)&regs->xer, 4);
-
-			strcpy(remcomOutBuffer,"OK");
-		}
-			break;
-		case 'H':
-			/* don't do anything, yet, just acknowledge */
-			hexToInt(&ptr, &addr);
-			strcpy(remcomOutBuffer,"OK");
-			break;
-
-		case 'm':	/* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
-				/* Try to read %x,%x.  */
-
-			ptr = &remcomInBuffer[1];
-
-			if (hexToInt(&ptr, &addr) && *ptr++ == ','
-					&& hexToInt(&ptr, &length)) {
-				if (mem2hex((char *)addr, remcomOutBuffer,
-							length))
-					break;
-				strcpy(remcomOutBuffer, "E03");
-			} else
-				strcpy(remcomOutBuffer, "E01");
-			break;
-
-		case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
-			/* Try to read '%x,%x:'.  */
-
-			ptr = &remcomInBuffer[1];
-
-			if (hexToInt(&ptr, &addr) && *ptr++ == ','
-					&& hexToInt(&ptr, &length)
-					&& *ptr++ == ':') {
-				if (hex2mem(ptr, (char *)addr, length))
-					strcpy(remcomOutBuffer, "OK");
-				else
-					strcpy(remcomOutBuffer, "E03");
-				flush_icache_range(addr, addr+length);
-			} else
-				strcpy(remcomOutBuffer, "E02");
-			break;
-
-
-		case 'k': /* kill the program, actually just continue */
-		case 'c': /* cAA..AA  Continue; address AA..AA optional */
-			/* try to read optional parameter, pc unchanged if no parm */
-
-			ptr = &remcomInBuffer[1];
-			if (hexToInt(&ptr, &addr))
-				regs->nip = addr;
-
-/* Need to flush the instruction cache here, as we may have deposited a
- * breakpoint, and the icache probably has no way of knowing that a data ref to
- * some location may have changed something that is in the instruction cache.
- */
-			kgdb_flush_cache_all();
-			mtmsr(msr);
-
-			kgdb_interruptible(1);
-			unlock_kernel();
-			kgdb_active = 0;
-			if (kdebug) {
-				printk("remcomInBuffer: %s\n", remcomInBuffer);
-				printk("remcomOutBuffer: %s\n", remcomOutBuffer);
-			}
-			return 1;
-
-		case 's':
-			kgdb_flush_cache_all();
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC);
-			regs->msr |= MSR_DE;
-#else
-			regs->msr |= MSR_SE;
-#endif
-			unlock_kernel();
-			kgdb_active = 0;
-			if (kdebug) {
-				printk("remcomInBuffer: %s\n", remcomInBuffer);
-				printk("remcomOutBuffer: %s\n", remcomOutBuffer);
-			}
-			return 1;
-
-		case 'r':		/* Reset (if user process..exit ???)*/
-			panic("kgdb reset.");
-			break;
-		}			/* switch */
-		if (remcomOutBuffer[0] && kdebug) {
-			printk("remcomInBuffer: %s\n", remcomInBuffer);
-			printk("remcomOutBuffer: %s\n", remcomOutBuffer);
-		}
-		/* reply to the request */
-		putpacket(remcomOutBuffer);
-	} /* while(1) */
-}
-
-/* This function will generate a breakpoint exception.  It is used at the
-   beginning of a program to sync up with a debugger and can be used
-   otherwise as a quick means to stop program execution and "break" into
-   the debugger. */
-
-void
-breakpoint(void)
-{
-	if (!initialized) {
-		printk("breakpoint() called b4 kgdb init\n");
-		return;
-	}
-
-	asm("	.globl breakinst	\n\
-	     breakinst: .long 0x7d821008");
-}
-
-#ifdef CONFIG_KGDB_CONSOLE
-/* Output string in GDB O-packet format if GDB has connected. If nothing
-   output, returns 0 (caller must then handle output). */
-int
-kgdb_output_string (const char* s, unsigned int count)
-{
-	char buffer[512];
-
-	if (!kgdb_started)
-		return 0;
-
-	count = (count <= (sizeof(buffer) / 2 - 2))
-		? count : (sizeof(buffer) / 2 - 2);
-
-	buffer[0] = 'O';
-	mem2hex (s, &buffer[1], count);
-	putpacket(buffer);
-
-	return 1;
-}
-#endif
-
-static void sysrq_handle_gdb(int key, struct pt_regs *pt_regs,
-			     struct tty_struct *tty)
-{
-	printk("Entering GDB stub\n");
-	breakpoint();
-}
-static struct sysrq_key_op sysrq_gdb_op = {
-        .handler        = sysrq_handle_gdb,
-        .help_msg       = "Gdb",
-        .action_msg     = "GDB",
-};
-
-static int gdb_register_sysrq(void)
-{
-	printk("Registering GDB sysrq handler\n");
-	register_sysrq_key('g', &sysrq_gdb_op);
-	return 0;
-}
-module_init(gdb_register_sysrq);
diff --git a/arch/ppc/kernel/ppc_htab.c b/arch/ppc/kernel/ppc_htab.c
deleted file mode 100644
index 9ed36dd9cbff..000000000000
--- a/arch/ppc/kernel/ppc_htab.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * PowerPC hash table management proc entry.  Will show information
- * about the current hash table and will allow changes to it.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/stat.h>
-#include <linux/sysctl.h>
-#include <linux/capability.h>
-#include <linux/ctype.h>
-#include <linux/threads.h>
-#include <linux/seq_file.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-
-#include <asm/uaccess.h>
-#include <asm/mmu.h>
-#include <asm/residual.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/cputable.h>
-#include <asm/system.h>
-#include <asm/reg.h>
-
-static int ppc_htab_show(struct seq_file *m, void *v);
-static ssize_t ppc_htab_write(struct file * file, const char __user * buffer,
-			      size_t count, loff_t *ppos);
-extern PTE *Hash, *Hash_end;
-extern unsigned long Hash_size, Hash_mask;
-extern unsigned long _SDR1;
-extern unsigned long htab_reloads;
-extern unsigned long htab_preloads;
-extern unsigned long htab_evicts;
-extern unsigned long pte_misses;
-extern unsigned long pte_errors;
-extern unsigned int primary_pteg_full;
-extern unsigned int htab_hash_searches;
-
-static int ppc_htab_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, ppc_htab_show, NULL);
-}
-
-const struct file_operations ppc_htab_operations = {
-	.open		= ppc_htab_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.write		= ppc_htab_write,
-	.release	= single_release,
-};
-
-static char *pmc1_lookup(unsigned long mmcr0)
-{
-	switch ( mmcr0 & (0x7f<<7) )
-	{
-	case 0x0:
-		return "none";
-	case MMCR0_PMC1_CYCLES:
-		return "cycles";
-	case MMCR0_PMC1_ICACHEMISS:
-		return "ic miss";
-	case MMCR0_PMC1_DTLB:
-		return "dtlb miss";
-	default:
-		return "unknown";
-	}
-}
-
-static char *pmc2_lookup(unsigned long mmcr0)
-{
-	switch ( mmcr0 & 0x3f )
-	{
-	case 0x0:
-		return "none";
-	case MMCR0_PMC2_CYCLES:
-		return "cycles";
-	case MMCR0_PMC2_DCACHEMISS:
-		return "dc miss";
-	case MMCR0_PMC2_ITLB:
-		return "itlb miss";
-	case MMCR0_PMC2_LOADMISSTIME:
-		return "load miss time";
-	default:
-		return "unknown";
-	}
-}
-
-/*
- * print some useful info about the hash table.  This function
- * is _REALLY_ slow (see the nested for loops below) but nothing
- * in here should be really timing critical. -- Cort
- */
-static int ppc_htab_show(struct seq_file *m, void *v)
-{
-	unsigned long mmcr0 = 0, pmc1 = 0, pmc2 = 0;
-#if defined(CONFIG_PPC_STD_MMU)
-	unsigned int kptes = 0, uptes = 0;
-	PTE *ptr;
-#endif /* CONFIG_PPC_STD_MMU */
-
-	if (cpu_has_feature(CPU_FTR_604_PERF_MON)) {
-		mmcr0 = mfspr(SPRN_MMCR0);
-		pmc1 = mfspr(SPRN_PMC1);
-		pmc2 = mfspr(SPRN_PMC2);
-		seq_printf(m,
-			      "604 Performance Monitoring\n"
-			      "MMCR0\t\t: %08lx %s%s ",
-			      mmcr0,
-			      ( mmcr0>>28 & 0x2 ) ? "(user mode counted)" : "",
-			      ( mmcr0>>28 & 0x4 ) ? "(kernel mode counted)" : "");
-		seq_printf(m,
-			      "\nPMC1\t\t: %08lx (%s)\n"
-			      "PMC2\t\t: %08lx (%s)\n",
-			      pmc1, pmc1_lookup(mmcr0),
-			      pmc2, pmc2_lookup(mmcr0));
-	}
-
-#ifdef CONFIG_PPC_STD_MMU
-	/* if we don't have a htab */
-	if ( Hash_size == 0 ) {
-		seq_printf(m, "No Hash Table used\n");
-		return 0;
-	}
-
-	for (ptr = Hash; ptr < Hash_end; ptr++) {
-		unsigned int mctx, vsid;
-
-		if (!ptr->v)
-			continue;
-		/* undo the esid skew */
-		vsid = ptr->vsid;
-		mctx = ((vsid - (vsid & 0xf) * 0x111) >> 4) & 0xfffff;
-		if (mctx == 0)
-			kptes++;
-		else
-			uptes++;
-	}
-
-	seq_printf(m,
-		      "PTE Hash Table Information\n"
-		      "Size\t\t: %luKb\n"
-		      "Buckets\t\t: %lu\n"
- 		      "Address\t\t: %08lx\n"
-		      "Entries\t\t: %lu\n"
-		      "User ptes\t: %u\n"
-		      "Kernel ptes\t: %u\n"
-		      "Percent full\t: %lu%%\n"
-                      , (unsigned long)(Hash_size>>10),
-		      (Hash_size/(sizeof(PTE)*8)),
-		      (unsigned long)Hash,
-		      Hash_size/sizeof(PTE)
-                      , uptes,
-		      kptes,
-		      ((kptes+uptes)*100) / (Hash_size/sizeof(PTE))
-		);
-
-	seq_printf(m,
-		      "Reloads\t\t: %lu\n"
-		      "Preloads\t: %lu\n"
-		      "Searches\t: %u\n"
-		      "Overflows\t: %u\n"
-		      "Evicts\t\t: %lu\n",
-		      htab_reloads, htab_preloads, htab_hash_searches,
-		      primary_pteg_full, htab_evicts);
-#endif /* CONFIG_PPC_STD_MMU */
-
-	seq_printf(m,
-		      "Non-error misses: %lu\n"
-		      "Error misses\t: %lu\n",
-		      pte_misses, pte_errors);
-	return 0;
-}
-
-/*
- * Allow user to define performance counters and resize the hash table
- */
-static ssize_t ppc_htab_write(struct file * file, const char __user * ubuffer,
-			      size_t count, loff_t *ppos)
-{
-#ifdef CONFIG_PPC_STD_MMU
-	unsigned long tmp;
-	char buffer[16];
-
-	if (!capable(CAP_SYS_ADMIN))
-		return -EACCES;
-	if (strncpy_from_user(buffer, ubuffer, 15))
-		return -EFAULT;
-	buffer[15] = 0;
-
-	/* don't set the htab size for now */
-	if ( !strncmp( buffer, "size ", 5) )
-		return -EBUSY;
-
-	if ( !strncmp( buffer, "reset", 5) )
-	{
-		if (cpu_has_feature(CPU_FTR_604_PERF_MON)) {
-			/* reset PMC1 and PMC2 */
-			mtspr(SPRN_PMC1, 0);
-			mtspr(SPRN_PMC2, 0);
-		}
-		htab_reloads = 0;
-		htab_evicts = 0;
-		pte_misses = 0;
-		pte_errors = 0;
-	}
-
-	/* Everything below here requires the performance monitor feature. */
-	if (!cpu_has_feature(CPU_FTR_604_PERF_MON))
-		return count;
-
-	/* turn off performance monitoring */
-	if ( !strncmp( buffer, "off", 3) )
-	{
-		mtspr(SPRN_MMCR0, 0);
-		mtspr(SPRN_PMC1, 0);
-		mtspr(SPRN_PMC2, 0);
-	}
-
-	if ( !strncmp( buffer, "user", 4) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-		tmp = (mfspr(SPRN_MMCR0) & ~(0x60000000)) | 0x20000000;
-		mtspr(SPRN_MMCR0, tmp);
-		mtspr(SPRN_PMC1, 0);
-		mtspr(SPRN_PMC2, 0);
-	}
-
-	if ( !strncmp( buffer, "kernel", 6) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-		tmp = (mfspr(SPRN_MMCR0) & ~(0x60000000)) | 0x40000000;
-		mtspr(SPRN_MMCR0, tmp);
-		mtspr(SPRN_PMC1, 0);
-		mtspr(SPRN_PMC2, 0);
-	}
-
-	/* PMC1 values */
-	if ( !strncmp( buffer, "dtlb", 4) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-		tmp = (mfspr(SPRN_MMCR0) & ~(0x7F << 7)) | MMCR0_PMC1_DTLB;
-		mtspr(SPRN_MMCR0, tmp);
-		mtspr(SPRN_PMC1, 0);
-	}
-
-	if ( !strncmp( buffer, "ic miss", 7) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-		tmp = (mfspr(SPRN_MMCR0) & ~(0x7F<<7)) | MMCR0_PMC1_ICACHEMISS;
-		mtspr(SPRN_MMCR0, tmp);
-		mtspr(SPRN_PMC1, 0);
-	}
-
-	/* PMC2 values */
-	if ( !strncmp( buffer, "load miss time", 14) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-	       asm volatile(
-		       "mfspr %0,%1\n\t"     /* get current mccr0 */
-		       "rlwinm %0,%0,0,0,31-6\n\t"  /* clear bits [26-31] */
-		       "ori   %0,%0,%2 \n\t" /* or in mmcr0 settings */
-		       "mtspr %1,%0 \n\t"    /* set new mccr0 */
-		       "mtspr %3,%4 \n\t"    /* reset the pmc */
-		       : "=r" (tmp)
-		       : "i" (SPRN_MMCR0),
-		       "i" (MMCR0_PMC2_LOADMISSTIME),
-		       "i" (SPRN_PMC2),  "r" (0) );
-	}
-
-	if ( !strncmp( buffer, "itlb", 4) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-	       asm volatile(
-		       "mfspr %0,%1\n\t"     /* get current mccr0 */
-		       "rlwinm %0,%0,0,0,31-6\n\t"  /* clear bits [26-31] */
-		       "ori   %0,%0,%2 \n\t" /* or in mmcr0 settings */
-		       "mtspr %1,%0 \n\t"    /* set new mccr0 */
-		       "mtspr %3,%4 \n\t"    /* reset the pmc */
-		       : "=r" (tmp)
-		       : "i" (SPRN_MMCR0), "i" (MMCR0_PMC2_ITLB),
-		       "i" (SPRN_PMC2),  "r" (0) );
-	}
-
-	if ( !strncmp( buffer, "dc miss", 7) )
-	{
-		/* setup mmcr0 and clear the correct pmc */
-	       asm volatile(
-		       "mfspr %0,%1\n\t"     /* get current mccr0 */
-		       "rlwinm %0,%0,0,0,31-6\n\t"  /* clear bits [26-31] */
-		       "ori   %0,%0,%2 \n\t" /* or in mmcr0 settings */
-		       "mtspr %1,%0 \n\t"    /* set new mccr0 */
-		       "mtspr %3,%4 \n\t"    /* reset the pmc */
-		       : "=r" (tmp)
-		       : "i" (SPRN_MMCR0), "i" (MMCR0_PMC2_DCACHEMISS),
-		       "i" (SPRN_PMC2),  "r" (0) );
-	}
-
-	return count;
-#else /* CONFIG_PPC_STD_MMU */
-	return 0;
-#endif /* CONFIG_PPC_STD_MMU */
-}
-
-int proc_dol2crvec(ctl_table *table, int write, struct file *filp,
-		  void __user *buffer_arg, size_t *lenp, loff_t *ppos)
-{
-	int vleft, first=1, len, left, val;
-	char __user *buffer = (char __user *) buffer_arg;
-	#define TMPBUFLEN 256
-	char buf[TMPBUFLEN], *p;
-	static const char *sizestrings[4] = {
-		"2MB", "256KB", "512KB", "1MB"
-	};
-	static const char *clockstrings[8] = {
-		"clock disabled", "+1 clock", "+1.5 clock", "reserved(3)",
-		"+2 clock", "+2.5 clock", "+3 clock", "reserved(7)"
-	};
-	static const char *typestrings[4] = {
-		"flow-through burst SRAM", "reserved SRAM",
-		"pipelined burst SRAM", "pipelined late-write SRAM"
-	};
-	static const char *holdstrings[4] = {
-		"0.5", "1.0", "(reserved2)", "(reserved3)"
-	};
-
-	if (!cpu_has_feature(CPU_FTR_L2CR))
-		return -EFAULT;
-
-	if ( /*!table->maxlen ||*/ (*ppos && !write)) {
-		*lenp = 0;
-		return 0;
-	}
-
-	vleft = table->maxlen / sizeof(int);
-	left = *lenp;
-
-	for (; left /*&& vleft--*/; first=0) {
-		if (write) {
-			while (left) {
-				char c;
-				if(get_user(c, buffer))
-					return -EFAULT;
-				if (!isspace(c))
-					break;
-				left--;
-				buffer++;
-			}
-			if (!left)
-				break;
-			len = left;
-			if (len > TMPBUFLEN-1)
-				len = TMPBUFLEN-1;
-			if(copy_from_user(buf, buffer, len))
-				return -EFAULT;
-			buf[len] = 0;
-			p = buf;
-			if (*p < '0' || *p > '9')
-				break;
-			val = simple_strtoul(p, &p, 0);
-			len = p-buf;
-			if ((len < left) && *p && !isspace(*p))
-				break;
-			buffer += len;
-			left -= len;
-			_set_L2CR(val);
-		} else {
-			p = buf;
-			if (!first)
-				*p++ = '\t';
-			val = _get_L2CR();
-			p += sprintf(p, "0x%08x: ", val);
-			p += sprintf(p, " %s", (val >> 31) & 1 ? "enabled" :
-				     	"disabled");
-			p += sprintf(p, ", %sparity", (val>>30)&1 ? "" : "no ");
-			p += sprintf(p, ", %s", sizestrings[(val >> 28) & 3]);
-			p += sprintf(p, ", %s", clockstrings[(val >> 25) & 7]);
-			p += sprintf(p, ", %s", typestrings[(val >> 23) & 2]);
-			p += sprintf(p, "%s", (val>>22)&1 ? ", data only" : "");
-			p += sprintf(p, "%s", (val>>20)&1 ? ", ZZ enabled": "");
-			p += sprintf(p, ", %s", (val>>19)&1 ? "write-through" :
-					"copy-back");
-			p += sprintf(p, "%s", (val>>18)&1 ? ", testing" : "");
-			p += sprintf(p, ", %sns hold",holdstrings[(val>>16)&3]);
-			p += sprintf(p, "%s", (val>>15)&1 ? ", DLL slow" : "");
-			p += sprintf(p, "%s", (val>>14)&1 ? ", diff clock" :"");
-			p += sprintf(p, "%s", (val>>13)&1 ? ", DLL bypass" :"");
-
-			p += sprintf(p,"\n");
-
-			len = strlen(buf);
-			if (len > left)
-				len = left;
-			if (copy_to_user(buffer, buf, len))
-				return -EFAULT;
-			left -= len;
-			buffer += len;
-			break;
-		}
-	}
-
-	if (!write && !first && left) {
-		if(put_user('\n', (char __user *) buffer))
-			return -EFAULT;
-		left--, buffer++;
-	}
-	if (write) {
-		char __user *s = (char __user *) buffer;
-		while (left) {
-			char c;
-			if(get_user(c, s++))
-				return -EFAULT;
-			if (!isspace(c))
-				break;
-			left--;
-		}
-	}
-	if (write && first)
-		return -EINVAL;
-	*lenp -= left;
-	*ppos += *lenp;
-	return 0;
-}
-
-#ifdef CONFIG_SYSCTL
-/*
- * Register our sysctl.
- */
-static ctl_table htab_ctl_table[]={
-	{
-		.procname	= "l2cr",
-		.mode		= 0644,
-		.proc_handler	= &proc_dol2crvec,
-	},
-	{}
-};
-static ctl_table htab_sysctl_root[] = {
-	{
-		.ctl_name	= CTL_KERN,
-		.procname	= "kernel",
-		.mode		= 0555,
-		.child		= htab_ctl_table,
-	},
-	{}
-};
-
-static int __init
-register_ppc_htab_sysctl(void)
-{
-	register_sysctl_table(htab_sysctl_root);
-
-	return 0;
-}
-
-__initcall(register_ppc_htab_sysctl);
-#endif
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
deleted file mode 100644
index 5d529bcbeee9..000000000000
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ /dev/null
@@ -1,258 +0,0 @@
-#include <linux/module.h>
-#include <linux/threads.h>
-#include <linux/smp.h>
-#include <linux/sched.h>
-#include <linux/elfcore.h>
-#include <linux/string.h>
-#include <linux/interrupt.h>
-#include <linux/screen_info.h>
-#include <linux/vt_kern.h>
-#include <linux/nvram.h>
-#include <linux/console.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/pm.h>
-#include <linux/bitops.h>
-
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/ide.h>
-#include <asm/atomic.h>
-#include <asm/checksum.h>
-#include <asm/pgtable.h>
-#include <asm/tlbflush.h>
-#include <asm/cacheflush.h>
-#include <linux/adb.h>
-#include <linux/cuda.h>
-#include <linux/pmu.h>
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/irq.h>
-#include <asm/dma.h>
-#include <asm/machdep.h>
-#include <asm/hw_irq.h>
-#include <asm/nvram.h>
-#include <asm/mmu_context.h>
-#include <asm/backlight.h>
-#include <asm/time.h>
-#include <asm/cputable.h>
-#include <asm/btext.h>
-#include <asm/xmon.h>
-#include <asm/signal.h>
-#include <asm/dcr.h>
-
-#ifdef  CONFIG_8xx
-#include <asm/cpm1.h>
-#endif
-
-extern void transfer_to_handler(void);
-extern void do_IRQ(struct pt_regs *regs);
-extern void machine_check_exception(struct pt_regs *regs);
-extern void alignment_exception(struct pt_regs *regs);
-extern void program_check_exception(struct pt_regs *regs);
-extern void single_step_exception(struct pt_regs *regs);
-extern int sys_sigreturn(struct pt_regs *regs);
-
-long long __ashrdi3(long long, int);
-long long __ashldi3(long long, int);
-long long __lshrdi3(long long, int);
-
-EXPORT_SYMBOL(empty_zero_page);
-EXPORT_SYMBOL(clear_pages);
-EXPORT_SYMBOL(clear_user_page);
-EXPORT_SYMBOL(copy_page);
-EXPORT_SYMBOL(transfer_to_handler);
-EXPORT_SYMBOL(do_IRQ);
-EXPORT_SYMBOL(machine_check_exception);
-EXPORT_SYMBOL(alignment_exception);
-EXPORT_SYMBOL(program_check_exception);
-EXPORT_SYMBOL(single_step_exception);
-EXPORT_SYMBOL(sys_sigreturn);
-EXPORT_SYMBOL(ppc_n_lost_interrupts);
-
-EXPORT_SYMBOL(ISA_DMA_THRESHOLD);
-EXPORT_SYMBOL(DMA_MODE_READ);
-EXPORT_SYMBOL(DMA_MODE_WRITE);
-
-#if !defined(__INLINE_BITOPS)
-EXPORT_SYMBOL(set_bit);
-EXPORT_SYMBOL(clear_bit);
-EXPORT_SYMBOL(change_bit);
-EXPORT_SYMBOL(test_and_set_bit);
-EXPORT_SYMBOL(test_and_clear_bit);
-EXPORT_SYMBOL(test_and_change_bit);
-#endif /* __INLINE_BITOPS */
-
-EXPORT_SYMBOL(strcpy);
-EXPORT_SYMBOL(strncpy);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strcmp);
-EXPORT_SYMBOL(strncmp);
-
-EXPORT_SYMBOL(csum_partial);
-EXPORT_SYMBOL(csum_partial_copy_generic);
-EXPORT_SYMBOL(ip_fast_csum);
-EXPORT_SYMBOL(csum_tcpudp_magic);
-
-EXPORT_SYMBOL(__copy_tofrom_user);
-EXPORT_SYMBOL(__clear_user);
-EXPORT_SYMBOL(__strncpy_from_user);
-EXPORT_SYMBOL(__strnlen_user);
-
-/*
-EXPORT_SYMBOL(inb);
-EXPORT_SYMBOL(inw);
-EXPORT_SYMBOL(inl);
-EXPORT_SYMBOL(outb);
-EXPORT_SYMBOL(outw);
-EXPORT_SYMBOL(outl);
-EXPORT_SYMBOL(outsl);*/
-
-EXPORT_SYMBOL(_insb);
-EXPORT_SYMBOL(_outsb);
-EXPORT_SYMBOL(_insw_ns);
-EXPORT_SYMBOL(_outsw_ns);
-EXPORT_SYMBOL(_insl_ns);
-EXPORT_SYMBOL(_outsl_ns);
-EXPORT_SYMBOL(iopa);
-EXPORT_SYMBOL(ioremap);
-#ifdef CONFIG_44x
-EXPORT_SYMBOL(ioremap64);
-#endif
-EXPORT_SYMBOL(__ioremap);
-EXPORT_SYMBOL(iounmap);
-EXPORT_SYMBOL(ioremap_bot);	/* aka VMALLOC_END */
-
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL(isa_io_base);
-EXPORT_SYMBOL(isa_mem_base);
-EXPORT_SYMBOL(pci_dram_offset);
-EXPORT_SYMBOL(pci_alloc_consistent);
-EXPORT_SYMBOL(pci_free_consistent);
-EXPORT_SYMBOL(pci_bus_io_base);
-EXPORT_SYMBOL(pci_bus_io_base_phys);
-EXPORT_SYMBOL(pci_bus_mem_base_phys);
-EXPORT_SYMBOL(pci_bus_to_hose);
-EXPORT_SYMBOL(pci_resource_to_bus);
-EXPORT_SYMBOL(pci_phys_to_bus);
-EXPORT_SYMBOL(pci_bus_to_phys);
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-extern void flush_dcache_all(void);
-EXPORT_SYMBOL(flush_dcache_all);
-#endif
-
-EXPORT_SYMBOL(start_thread);
-EXPORT_SYMBOL(kernel_thread);
-
-EXPORT_SYMBOL(flush_instruction_cache);
-EXPORT_SYMBOL(giveup_fpu);
-EXPORT_SYMBOL(__flush_icache_range);
-EXPORT_SYMBOL(flush_dcache_range);
-EXPORT_SYMBOL(flush_icache_user_range);
-EXPORT_SYMBOL(flush_dcache_page);
-EXPORT_SYMBOL(flush_tlb_kernel_range);
-EXPORT_SYMBOL(flush_tlb_page);
-EXPORT_SYMBOL(_tlbie);
-#ifdef CONFIG_ALTIVEC
-#ifndef CONFIG_SMP
-EXPORT_SYMBOL(last_task_used_altivec);
-#endif
-EXPORT_SYMBOL(giveup_altivec);
-#endif /* CONFIG_ALTIVEC */
-#ifdef CONFIG_SMP
-EXPORT_SYMBOL(smp_call_function);
-EXPORT_SYMBOL(smp_hw_index);
-#endif
-
-EXPORT_SYMBOL(ppc_md);
-
-#ifdef CONFIG_ADB
-EXPORT_SYMBOL(adb_request);
-EXPORT_SYMBOL(adb_register);
-EXPORT_SYMBOL(adb_unregister);
-EXPORT_SYMBOL(adb_poll);
-EXPORT_SYMBOL(adb_try_handler_change);
-#endif /* CONFIG_ADB */
-#ifdef CONFIG_ADB_CUDA
-EXPORT_SYMBOL(cuda_request);
-EXPORT_SYMBOL(cuda_poll);
-#endif /* CONFIG_ADB_CUDA */
-#if defined(CONFIG_BOOTX_TEXT)
-EXPORT_SYMBOL(btext_update_display);
-#endif
-EXPORT_SYMBOL(to_tm);
-
-EXPORT_SYMBOL(pm_power_off);
-
-EXPORT_SYMBOL(__ashrdi3);
-EXPORT_SYMBOL(__ashldi3);
-EXPORT_SYMBOL(__lshrdi3);
-EXPORT_SYMBOL(memcpy);
-EXPORT_SYMBOL(cacheable_memcpy);
-EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(memcmp);
-EXPORT_SYMBOL(memchr);
-
-#if defined(CONFIG_FB_VGA16_MODULE)
-EXPORT_SYMBOL(screen_info);
-#endif
-
-EXPORT_SYMBOL(__delay);
-EXPORT_SYMBOL(timer_interrupt);
-EXPORT_SYMBOL(irq_desc);
-EXPORT_SYMBOL(tb_ticks_per_jiffy);
-EXPORT_SYMBOL(console_drivers);
-#ifdef CONFIG_XMON
-EXPORT_SYMBOL(xmon);
-EXPORT_SYMBOL(xmon_printf);
-#endif
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_XMON)
-extern void (*debugger)(struct pt_regs *regs);
-extern int (*debugger_bpt)(struct pt_regs *regs);
-extern int (*debugger_sstep)(struct pt_regs *regs);
-extern int (*debugger_iabr_match)(struct pt_regs *regs);
-extern int (*debugger_dabr_match)(struct pt_regs *regs);
-extern void (*debugger_fault_handler)(struct pt_regs *regs);
-
-EXPORT_SYMBOL(debugger);
-EXPORT_SYMBOL(debugger_bpt);
-EXPORT_SYMBOL(debugger_sstep);
-EXPORT_SYMBOL(debugger_iabr_match);
-EXPORT_SYMBOL(debugger_dabr_match);
-EXPORT_SYMBOL(debugger_fault_handler);
-#endif
-
-#ifdef  CONFIG_8xx
-EXPORT_SYMBOL(cpm_install_handler);
-EXPORT_SYMBOL(cpm_free_handler);
-#endif /* CONFIG_8xx */
-#if defined(CONFIG_8xx) || defined(CONFIG_40x)
-EXPORT_SYMBOL(__res);
-#endif
-
-EXPORT_SYMBOL(next_mmu_context);
-EXPORT_SYMBOL(set_context);
-EXPORT_SYMBOL(disarm_decr);
-#ifdef CONFIG_PPC_STD_MMU
-extern long mol_trampoline;
-EXPORT_SYMBOL(mol_trampoline); /* For MOL */
-EXPORT_SYMBOL(flush_hash_pages); /* For MOL */
-#ifdef CONFIG_SMP
-extern int mmu_hash_lock;
-EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */
-#endif /* CONFIG_SMP */
-extern long *intercept_table;
-EXPORT_SYMBOL(intercept_table);
-#endif /* CONFIG_PPC_STD_MMU */
-#ifdef CONFIG_PPC_DCR_NATIVE
-EXPORT_SYMBOL(__mtdcr);
-EXPORT_SYMBOL(__mfdcr);
-#endif
diff --git a/arch/ppc/kernel/relocate_kernel.S b/arch/ppc/kernel/relocate_kernel.S
deleted file mode 100644
index 9b2ad48e988c..000000000000
--- a/arch/ppc/kernel/relocate_kernel.S
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * relocate_kernel.S - put the kernel image in place to boot
- * Copyright (C) 2002-2003 Eric Biederman  <ebiederm@xmission.com>
- *
- * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz
- *
- * This source code is licensed under the GNU General Public License,
- * Version 2.  See the file COPYING for more details.
- */
-
-#include <asm/reg.h>
-#include <asm/ppc_asm.h>
-#include <asm/processor.h>
-
-#include <asm/kexec.h>
-
-#define PAGE_SIZE      4096 /* must be same value as in <asm/page.h> */
-
-	/*
-	 * Must be relocatable PIC code callable as a C function.
-	 */
-	.globl relocate_new_kernel
-relocate_new_kernel:
-	/* r3 = page_list   */
-	/* r4 = reboot_code_buffer */
-	/* r5 = start_address      */
-
-	li	r0, 0
-
-	/*
-	 * Set Machine Status Register to a known status,
-	 * switch the MMU off and jump to 1: in a single step.
-	 */
-
-	mr	r8, r0
-	ori     r8, r8, MSR_RI|MSR_ME
-	mtspr	SPRN_SRR1, r8
-	addi	r8, r4, 1f - relocate_new_kernel
-	mtspr	SPRN_SRR0, r8
-	sync
-	rfi
-
-1:
-	/* from this point address translation is turned off */
-	/* and interrupts are disabled */
-
-	/* set a new stack at the bottom of our page... */
-	/* (not really needed now) */
-	addi	r1, r4, KEXEC_CONTROL_CODE_SIZE - 8 /* for LR Save+Back Chain */
-	stw	r0, 0(r1)
-
-	/* Do the copies */
-	li	r6, 0 /* checksum */
-	mr	r0, r3
-	b	1f
-
-0:	/* top, read another word for the indirection page */
-	lwzu	r0, 4(r3)
-
-1:
-	/* is it a destination page? (r8) */
-	rlwinm.	r7, r0, 0, 31, 31 /* IND_DESTINATION (1<<0) */
-	beq	2f
-
-	rlwinm	r8, r0, 0, 0, 19 /* clear kexec flags, page align */
-	b	0b
-
-2:	/* is it an indirection page? (r3) */
-	rlwinm.	r7, r0, 0, 30, 30 /* IND_INDIRECTION (1<<1) */
-	beq	2f
-
-	rlwinm	r3, r0, 0, 0, 19 /* clear kexec flags, page align */
-	subi	r3, r3, 4
-	b	0b
-
-2:	/* are we done? */
-	rlwinm.	r7, r0, 0, 29, 29 /* IND_DONE (1<<2) */
-	beq	2f
-	b	3f
-
-2:	/* is it a source page? (r9) */
-	rlwinm.	r7, r0, 0, 28, 28 /* IND_SOURCE (1<<3) */
-	beq	0b
-
-	rlwinm	r9, r0, 0, 0, 19 /* clear kexec flags, page align */
-
-	li	r7, PAGE_SIZE / 4
-	mtctr   r7
-	subi    r9, r9, 4
-	subi    r8, r8, 4
-9:
-	lwzu    r0, 4(r9)  /* do the copy */
-	xor	r6, r6, r0
-	stwu    r0, 4(r8)
-	dcbst	0, r8
-	sync
-	icbi	0, r8
-	bdnz    9b
-
-	addi    r9, r9, 4
-	addi    r8, r8, 4
-	b	0b
-
-3:
-
-	/* To be certain of avoiding problems with self-modifying code
-	 * execute a serializing instruction here.
-	 */
-	isync
-	sync
-
-	/* jump to the entry point, usually the setup routine */
-	mtlr	r5
-	blrl
-
-1:	b	1b
-
-relocate_new_kernel_end:
-
-	.globl relocate_new_kernel_size
-relocate_new_kernel_size:
-	.long relocate_new_kernel_end - relocate_new_kernel
-
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
deleted file mode 100644
index 51e8094f52d6..000000000000
--- a/arch/ppc/kernel/setup.c
+++ /dev/null
@@ -1,572 +0,0 @@
-/*
- * Common prep boot and setup code.
- */
-
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/screen_info.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/cpu.h>
-#include <linux/console.h>
-
-#include <asm/residual.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/processor.h>
-#include <asm/pgtable.h>
-#include <asm/bootinfo.h>
-#include <asm/setup.h>
-#include <asm/smp.h>
-#include <asm/elf.h>
-#include <asm/cputable.h>
-#include <asm/bootx.h>
-#include <asm/btext.h>
-#include <asm/machdep.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/sections.h>
-#include <asm/nvram.h>
-#include <asm/xmon.h>
-#include <asm/ocp.h>
-#include <asm/irq.h>
-
-#define USES_PPC_SYS (defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \
-		      defined(CONFIG_PPC_MPC52xx))
-
-#if USES_PPC_SYS
-#include <asm/ppc_sys.h>
-#endif
-
-#if defined CONFIG_KGDB
-#include <asm/kgdb.h>
-#endif
-
-extern void platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7);
-extern void reloc_got2(unsigned long offset);
-
-extern void ppc6xx_idle(void);
-extern void power4_idle(void);
-
-extern boot_infos_t *boot_infos;
-
-/* Used with the BI_MEMSIZE bootinfo parameter to store the memory
-   size value reported by the boot loader. */
-unsigned long boot_mem_size;
-
-unsigned long ISA_DMA_THRESHOLD;
-unsigned int DMA_MODE_READ;
-unsigned int DMA_MODE_WRITE;
-
-#ifdef CONFIG_PPC_PREP
-extern void prep_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7);
-
-dev_t boot_dev;
-#endif /* CONFIG_PPC_PREP */
-
-int have_of;
-EXPORT_SYMBOL(have_of);
-
-#ifdef __DO_IRQ_CANON
-int ppc_do_canonicalize_irqs;
-EXPORT_SYMBOL(ppc_do_canonicalize_irqs);
-#endif
-
-#ifdef CONFIG_VGA_CONSOLE
-unsigned long vgacon_remap_base;
-#endif
-
-struct machdep_calls ppc_md;
-
-/*
- * These are used in binfmt_elf.c to put aux entries on the stack
- * for each elf executable being started.
- */
-int dcache_bsize;
-int icache_bsize;
-int ucache_bsize;
-
-#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_FB_VGA16) || \
-    defined(CONFIG_FB_VGA16_MODULE) || defined(CONFIG_FB_VESA)
-struct screen_info screen_info = {
-	0, 25,			/* orig-x, orig-y */
-	0,			/* unused */
-	0,			/* orig-video-page */
-	0,			/* orig-video-mode */
-	80,			/* orig-video-cols */
-	0,0,0,			/* ega_ax, ega_bx, ega_cx */
-	25,			/* orig-video-lines */
-	1,			/* orig-video-isVGA */
-	16			/* orig-video-points */
-};
-#endif /* CONFIG_VGA_CONSOLE || CONFIG_FB_VGA16 || CONFIG_FB_VESA */
-
-void machine_restart(char *cmd)
-{
-#ifdef CONFIG_NVRAM
-	nvram_sync();
-#endif
-	ppc_md.restart(cmd);
-}
-
-static void ppc_generic_power_off(void)
-{
-	ppc_md.power_off();
-}
-
-void machine_halt(void)
-{
-#ifdef CONFIG_NVRAM
-	nvram_sync();
-#endif
-	ppc_md.halt();
-}
-
-void (*pm_power_off)(void) = ppc_generic_power_off;
-
-void machine_power_off(void)
-{
-#ifdef CONFIG_NVRAM
-	nvram_sync();
-#endif
-	if (pm_power_off)
-		pm_power_off();
-	ppc_generic_power_off();
-}
-
-#ifdef CONFIG_TAU
-extern u32 cpu_temp(unsigned long cpu);
-extern u32 cpu_temp_both(unsigned long cpu);
-#endif /* CONFIG_TAU */
-
-int show_cpuinfo(struct seq_file *m, void *v)
-{
-	int i = (int) v - 1;
-	int err = 0;
-	unsigned int pvr;
-	unsigned short maj, min;
-	unsigned long lpj;
-
-	if (i >= NR_CPUS) {
-		/* Show summary information */
-#ifdef CONFIG_SMP
-		unsigned long bogosum = 0;
-		for_each_online_cpu(i)
-			bogosum += cpu_data[i].loops_per_jiffy;
-		seq_printf(m, "total bogomips\t: %lu.%02lu\n",
-			   bogosum/(500000/HZ), bogosum/(5000/HZ) % 100);
-#endif /* CONFIG_SMP */
-
-		if (ppc_md.show_cpuinfo != NULL)
-			err = ppc_md.show_cpuinfo(m);
-		return err;
-	}
-
-#ifdef CONFIG_SMP
-	if (!cpu_online(i))
-		return 0;
-	pvr = cpu_data[i].pvr;
-	lpj = cpu_data[i].loops_per_jiffy;
-#else
-	pvr = mfspr(SPRN_PVR);
-	lpj = loops_per_jiffy;
-#endif
-
-	seq_printf(m, "processor\t: %d\n", i);
-	seq_printf(m, "cpu\t\t: ");
-
-	if (cur_cpu_spec->pvr_mask)
-		seq_printf(m, "%s", cur_cpu_spec->cpu_name);
-	else
-		seq_printf(m, "unknown (%08x)", pvr);
-#ifdef CONFIG_ALTIVEC
-	if (cur_cpu_spec->cpu_features & CPU_FTR_ALTIVEC)
-		seq_printf(m, ", altivec supported");
-#endif
-	seq_printf(m, "\n");
-
-#ifdef CONFIG_TAU
-	if (cur_cpu_spec->cpu_features & CPU_FTR_TAU) {
-#ifdef CONFIG_TAU_AVERAGE
-		/* more straightforward, but potentially misleading */
-		seq_printf(m,  "temperature \t: %u C (uncalibrated)\n",
-			   cpu_temp(i));
-#else
-		/* show the actual temp sensor range */
-		u32 temp;
-		temp = cpu_temp_both(i);
-		seq_printf(m, "temperature \t: %u-%u C (uncalibrated)\n",
-			   temp & 0xff, temp >> 16);
-#endif
-	}
-#endif /* CONFIG_TAU */
-
-	if (ppc_md.show_percpuinfo != NULL) {
-		err = ppc_md.show_percpuinfo(m, i);
-		if (err)
-			return err;
-	}
-
-	/* If we are a Freescale core do a simple check so
-	 * we dont have to keep adding cases in the future */
-	if ((PVR_VER(pvr) & 0x8000) == 0x8000) {
-		maj = PVR_MAJ(pvr);
-		min = PVR_MIN(pvr);
-	} else {
-		switch (PVR_VER(pvr)) {
-			case 0x0020:	/* 403 family */
-				maj = PVR_MAJ(pvr) + 1;
-				min = PVR_MIN(pvr);
-				break;
-			case 0x1008:	/* 740P/750P ?? */
-				maj = ((pvr >> 8) & 0xFF) - 1;
-				min = pvr & 0xFF;
-				break;
-			default:
-				maj = (pvr >> 8) & 0xFF;
-				min = pvr & 0xFF;
-				break;
-		}
-	}
-
-	seq_printf(m, "revision\t: %hd.%hd (pvr %04x %04x)\n",
-		   maj, min, PVR_VER(pvr), PVR_REV(pvr));
-
-	seq_printf(m, "bogomips\t: %lu.%02lu\n",
-		   lpj / (500000/HZ), (lpj / (5000/HZ)) % 100);
-
-#if USES_PPC_SYS
-	if (cur_ppc_sys_spec->ppc_sys_name)
-		seq_printf(m, "chipset\t\t: %s\n",
-			cur_ppc_sys_spec->ppc_sys_name);
-#endif
-
-#ifdef CONFIG_SMP
-	seq_printf(m, "\n");
-#endif
-
-	return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-	int i = *pos;
-
-	return i <= NR_CPUS? (void *) (i + 1): NULL;
-}
-
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return c_start(m, pos);
-}
-
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
-	.start =c_start,
-	.next =	c_next,
-	.stop =	c_stop,
-	.show =	show_cpuinfo,
-};
-
-/*
- * We're called here very early in the boot.  We determine the machine
- * type and call the appropriate low-level setup functions.
- *  -- Cort <cort@fsmlabs.com>
- *
- * Note that the kernel may be running at an address which is different
- * from the address that it was linked at, so we must use RELOC/PTRRELOC
- * to access static data (including strings).  -- paulus
- */
-__init
-unsigned long
-early_init(int r3, int r4, int r5)
-{
- 	unsigned long phys;
-	unsigned long offset = reloc_offset();
-	struct cpu_spec *spec;
-
- 	/* Default */
- 	phys = offset + KERNELBASE;
-
-	/* First zero the BSS -- use memset, some arches don't have
-	 * caches on yet */
-	memset_io(PTRRELOC(&__bss_start), 0, _end - __bss_start);
-
-	/*
-	 * Identify the CPU type and fix up code sections
-	 * that depend on which cpu we have.
-	 */
-#if defined(CONFIG_440EP) && defined(CONFIG_PPC_FPU)
-	/* We pass the virtual PVR here for 440EP as 440EP and 440GR have
-	 * identical PVRs and there is no reliable way to check for the FPU
-	 */
-	spec = identify_cpu(offset, (mfspr(SPRN_PVR) | 0x8));
-#else
-	spec = identify_cpu(offset, mfspr(SPRN_PVR));
-#endif
-	do_feature_fixups(spec->cpu_features,
-			  PTRRELOC(&__start___ftr_fixup),
-			  PTRRELOC(&__stop___ftr_fixup));
-
-	return phys;
-}
-
-#ifdef CONFIG_PPC_PREP
-/*
- * The PPC_PREP version of platform_init...
- */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-#ifdef CONFIG_BOOTX_TEXT
-	if (boot_text_mapped) {
-		btext_clearscreen();
-		btext_welcome();
-	}
-#endif
-
-	parse_bootinfo(find_bootinfo());
-
-	prep_init(r3, r4, r5, r6, r7);
-}
-#endif /* CONFIG_PPC_PREP */
-
-struct bi_record *find_bootinfo(void)
-{
-	struct bi_record *rec;
-
-	rec = (struct bi_record *)_ALIGN((ulong)__bss_start+(1<<20)-1,(1<<20));
-	if ( rec->tag != BI_FIRST ) {
-		/*
-		 * This 0x10000 offset is a terrible hack but it will go away when
-		 * we have the bootloader handle all the relocation and
-		 * prom calls -- Cort
-		 */
-		rec = (struct bi_record *)_ALIGN((ulong)__bss_start+0x10000+(1<<20)-1,(1<<20));
-		if ( rec->tag != BI_FIRST )
-			return NULL;
-	}
-	return rec;
-}
-
-void parse_bootinfo(struct bi_record *rec)
-{
-	if (rec == NULL || rec->tag != BI_FIRST)
-		return;
-	while (rec->tag != BI_LAST) {
-		ulong *data = rec->data;
-		switch (rec->tag) {
-		case BI_CMD_LINE:
-			strlcpy(cmd_line, (void *)data, sizeof(cmd_line));
-			break;
-#ifdef CONFIG_BLK_DEV_INITRD
-		case BI_INITRD:
-			initrd_start = data[0] + KERNELBASE;
-			initrd_end = data[0] + data[1] + KERNELBASE;
-			break;
-#endif /* CONFIG_BLK_DEV_INITRD */
-		case BI_MEMSIZE:
-			boot_mem_size = data[0];
-			break;
-		}
-		rec = (struct bi_record *)((ulong)rec + rec->size);
-	}
-}
-
-/*
- * Find out what kind of machine we're on and save any data we need
- * from the early boot process (devtree is copied on pmac by prom_init()).
- * This is called very early on the boot process, after a minimal
- * MMU environment has been set up but before MMU_init is called.
- */
-void __init
-machine_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	     unsigned long r6, unsigned long r7)
-{
-#ifdef CONFIG_CMDLINE
-	strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
-#endif /* CONFIG_CMDLINE */
-
-#ifdef CONFIG_6xx
-	ppc_md.power_save = ppc6xx_idle;
-#endif
-
-	platform_init(r3, r4, r5, r6, r7);
-
-	if (ppc_md.progress)
-		ppc_md.progress("id mach(): done", 0x200);
-}
-#ifdef CONFIG_BOOKE_WDT
-/* Checks wdt=x and wdt_period=xx command-line option */
-int __init early_parse_wdt(char *p)
-{
-	if (p && strncmp(p, "0", 1) != 0)
-	       booke_wdt_enabled = 1;
-
-	return 0;
-}
-early_param("wdt", early_parse_wdt);
-
-int __init early_parse_wdt_period (char *p)
-{
-	if (p)
-		booke_wdt_period = simple_strtoul(p, NULL, 0);
-
-	return 0;
-}
-early_param("wdt_period", early_parse_wdt_period);
-#endif	/* CONFIG_BOOKE_WDT */
-
-/* Checks "l2cr=xxxx" command-line option */
-int __init ppc_setup_l2cr(char *str)
-{
-	if (cpu_has_feature(CPU_FTR_L2CR)) {
-		unsigned long val = simple_strtoul(str, NULL, 0);
-		printk(KERN_INFO "l2cr set to %lx\n", val);
-		_set_L2CR(0);		/* force invalidate by disable cache */
-		_set_L2CR(val);		/* and enable it */
-	}
-	return 1;
-}
-__setup("l2cr=", ppc_setup_l2cr);
-
-#ifdef CONFIG_GENERIC_NVRAM
-
-/* Generic nvram hooks used by drivers/char/gen_nvram.c */
-unsigned char nvram_read_byte(int addr)
-{
-	if (ppc_md.nvram_read_val)
-		return ppc_md.nvram_read_val(addr);
-	return 0xff;
-}
-EXPORT_SYMBOL(nvram_read_byte);
-
-void nvram_write_byte(unsigned char val, int addr)
-{
-	if (ppc_md.nvram_write_val)
-		ppc_md.nvram_write_val(addr, val);
-}
-EXPORT_SYMBOL(nvram_write_byte);
-
-void nvram_sync(void)
-{
-	if (ppc_md.nvram_sync)
-		ppc_md.nvram_sync();
-}
-EXPORT_SYMBOL(nvram_sync);
-
-#endif /* CONFIG_NVRAM */
-
-static struct cpu cpu_devices[NR_CPUS];
-
-int __init ppc_init(void)
-{
-	int i;
-
-	/* clear the progress line */
-	if ( ppc_md.progress ) ppc_md.progress("             ", 0xffff);
-
-	/* register CPU devices */
-	for_each_possible_cpu(i)
-		register_cpu(&cpu_devices[i], i);
-
-	/* call platform init */
-	if (ppc_md.init != NULL) {
-		ppc_md.init();
-	}
-	return 0;
-}
-
-arch_initcall(ppc_init);
-
-/* Warning, IO base is not yet inited */
-void __init setup_arch(char **cmdline_p)
-{
-	extern char *klimit;
-	extern void do_init_bootmem(void);
-
-	/* so udelay does something sensible, assume <= 1000 bogomips */
-	loops_per_jiffy = 500000000 / HZ;
-
-	if (ppc_md.init_early)
-		ppc_md.init_early();
-
-#ifdef CONFIG_XMON
-	xmon_init(1);
-	if (strstr(cmd_line, "xmon"))
-		xmon(NULL);
-#endif /* CONFIG_XMON */
-	if ( ppc_md.progress ) ppc_md.progress("setup_arch: enter", 0x3eab);
-
-#if defined(CONFIG_KGDB)
-	if (ppc_md.kgdb_map_scc)
-		ppc_md.kgdb_map_scc();
-	set_debug_traps();
-	if (strstr(cmd_line, "gdb")) {
-		if (ppc_md.progress)
-			ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
-		printk("kgdb breakpoint activated\n");
-		breakpoint();
-	}
-#endif
-
-	/*
-	 * Set cache line size based on type of cpu as a default.
-	 * Systems with OF can look in the properties on the cpu node(s)
-	 * for a possibly more accurate value.
-	 */
-	if (! cpu_has_feature(CPU_FTR_UNIFIED_ID_CACHE)) {
-		dcache_bsize = cur_cpu_spec->dcache_bsize;
-		icache_bsize = cur_cpu_spec->icache_bsize;
-		ucache_bsize = 0;
-	} else
-		ucache_bsize = dcache_bsize = icache_bsize
-			= cur_cpu_spec->dcache_bsize;
-
-	/* reboot on panic */
-	panic_timeout = 180;
-
-	init_mm.start_code = PAGE_OFFSET;
-	init_mm.end_code = (unsigned long) _etext;
-	init_mm.end_data = (unsigned long) _edata;
-	init_mm.brk = (unsigned long) klimit;
-
-	/* Save unparsed command line copy for /proc/cmdline */
-	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
-	*cmdline_p = cmd_line;
-
-	parse_early_param();
-
-	/* set up the bootmem stuff with available memory */
-	do_init_bootmem();
-	if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
-
-#ifdef CONFIG_PPC_OCP
-	/* Initialize OCP device list */
-	ocp_early_init();
-	if ( ppc_md.progress ) ppc_md.progress("ocp: exit", 0x3eab);
-#endif
-
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
-	ppc_md.setup_arch();
-	if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
-
-	paging_init();
-}
diff --git a/arch/ppc/kernel/smp-tbsync.c b/arch/ppc/kernel/smp-tbsync.c
deleted file mode 100644
index d0cf3f86931d..000000000000
--- a/arch/ppc/kernel/smp-tbsync.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Smp timebase synchronization for ppc.
- *
- * Copyright (C) 2003 Samuel Rydh (samuel@ibrium.se)
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/unistd.h>
-#include <linux/init.h>
-#include <asm/atomic.h>
-#include <asm/smp.h>
-#include <asm/time.h>
-
-#define NUM_ITER		300
-
-enum {
-	kExit=0, kSetAndTest, kTest
-};
-
-static struct {
-	volatile int		tbu;
-	volatile int		tbl;
-	volatile int		mark;
-	volatile int		cmd;
-	volatile int		handshake;
-	int			filler[3];
-
-	volatile int		ack;
-	int			filler2[7];
-
-	volatile int		race_result;
-} *tbsync;
-
-static volatile int		running;
-
-static void __devinit
-enter_contest( int mark, int add )
-{
-	while( (int)(get_tbl() - mark) < 0 )
-		tbsync->race_result = add;
-}
-
-void __devinit
-smp_generic_take_timebase( void )
-{
-	int cmd, tbl, tbu;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	while( !running )
-		;
-	rmb();
-
-	for( ;; ) {
-		tbsync->ack = 1;
-		while( !tbsync->handshake )
-			;
-		rmb();
-
-		cmd = tbsync->cmd;
-		tbl = tbsync->tbl;
-		tbu = tbsync->tbu;
-		tbsync->ack = 0;
-		if( cmd == kExit )
-			break;
-
-		if( cmd == kSetAndTest ) {
-			while( tbsync->handshake )
-				;
-			asm volatile ("mttbl %0" :: "r" (tbl) );
-			asm volatile ("mttbu %0" :: "r" (tbu) );
-		} else {
-			while( tbsync->handshake )
-				;
-		}
-		enter_contest( tbsync->mark, -1 );
-	}
-	local_irq_restore(flags);
-}
-
-static int __devinit
-start_contest( int cmd, int offset, int num )
-{
-	int i, tbu, tbl, mark, score=0;
-
-	tbsync->cmd = cmd;
-
-	local_irq_disable();
-	for( i=-3; i<num; ) {
-		tbl = get_tbl() + 400;
-		tbsync->tbu = tbu = get_tbu();
-		tbsync->tbl = tbl + offset;
-		tbsync->mark = mark = tbl + 400;
-
-		wmb();
-
-		tbsync->handshake = 1;
-		while( tbsync->ack )
-			;
-
-		while( (int)(get_tbl() - tbl) <= 0 )
-			;
-		tbsync->handshake = 0;
-		enter_contest( mark, 1 );
-
-		while( !tbsync->ack )
-			;
-
-		if( tbsync->tbu != get_tbu() || ((tbsync->tbl ^ get_tbl()) & 0x80000000) )
-			continue;
-		if( i++ > 0 )
-			score += tbsync->race_result;
-	}
-	local_irq_enable();
-	return score;
-}
-
-void __devinit
-smp_generic_give_timebase( void )
-{
-	int i, score, score2, old, min=0, max=5000, offset=1000;
-
-	printk("Synchronizing timebase\n");
-
-	/* if this fails then this kernel won't work anyway... */
-	tbsync = kzalloc( sizeof(*tbsync), GFP_KERNEL );
-	mb();
-	running = 1;
-
-	while( !tbsync->ack )
-		;
-
-	/* binary search */
-	for( old=-1 ; old != offset ; offset=(min+max)/2 ) {
-		score = start_contest( kSetAndTest, offset, NUM_ITER );
-
-		printk("score %d, offset %d\n", score, offset );
-
-		if( score > 0 )
-			max = offset;
-		else
-			min = offset;
-		old = offset;
-	}
-	score = start_contest( kSetAndTest, min, NUM_ITER );
-	score2 = start_contest( kSetAndTest, max, NUM_ITER );
-
-	printk( "Min %d (score %d), Max %d (score %d)\n", min, score, max, score2 );
-	score = abs( score );
-	score2 = abs( score2 );
-	offset = (score < score2) ? min : max;
-
-	/* guard against inaccurate mttb */
-	for( i=0; i<10; i++ ) {
-		start_contest( kSetAndTest, offset, NUM_ITER/10 );
-
-		if( (score2=start_contest(kTest, offset, NUM_ITER)) < 0 )
-			score2 = -score2;
-		if( score2 <= score || score2 < 20 )
-			break;
-	}
-	printk("Final offset: %d (%d/%d)\n", offset, score2, NUM_ITER );
-
-	/* exiting */
-	tbsync->cmd = kExit;
-	wmb();
-	tbsync->handshake = 1;
-	while( tbsync->ack )
-		;
-	tbsync->handshake = 0;
-	kfree( tbsync );
-	tbsync = NULL;
-	running = 0;
-
-	/* all done */
-	smp_tb_synchronized = 1;
-}
diff --git a/arch/ppc/kernel/smp.c b/arch/ppc/kernel/smp.c
deleted file mode 100644
index 055998575cb4..000000000000
--- a/arch/ppc/kernel/smp.c
+++ /dev/null
@@ -1,414 +0,0 @@
-/*
- * Smp support for ppc.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu) borrowing a great
- * deal of code from the sparc and intel versions.
- *
- * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu>
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/cache.h>
-
-#include <asm/ptrace.h>
-#include <asm/atomic.h>
-#include <asm/irq.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/smp.h>
-#include <asm/residual.h>
-#include <asm/time.h>
-#include <asm/thread_info.h>
-#include <asm/tlbflush.h>
-#include <asm/xmon.h>
-#include <asm/machdep.h>
-
-volatile int smp_commenced;
-int smp_tb_synchronized;
-struct cpuinfo_PPC cpu_data[NR_CPUS];
-atomic_t ipi_recv;
-atomic_t ipi_sent;
-cpumask_t cpu_online_map;
-cpumask_t cpu_possible_map;
-int smp_hw_index[NR_CPUS];
-struct thread_info *secondary_ti;
-static struct task_struct *idle_tasks[NR_CPUS];
-
-EXPORT_SYMBOL(cpu_online_map);
-EXPORT_SYMBOL(cpu_possible_map);
-
-/* SMP operations for this machine */
-struct smp_ops_t *smp_ops;
-
-/* all cpu mappings are 1-1 -- Cort */
-volatile unsigned long cpu_callin_map[NR_CPUS];
-
-int start_secondary(void *);
-void smp_call_function_interrupt(void);
-static int __smp_call_function(void (*func) (void *info), void *info,
-			       int wait, int target);
-
-/* Low level assembly function used to backup CPU 0 state */
-extern void __save_cpu_setup(void);
-
-/* Since OpenPIC has only 4 IPIs, we use slightly different message numbers.
- *
- * Make sure this matches openpic_request_IPIs in open_pic.c, or what shows up
- * in /proc/interrupts will be wrong!!! --Troy */
-#define PPC_MSG_CALL_FUNCTION	0
-#define PPC_MSG_RESCHEDULE	1
-#define PPC_MSG_INVALIDATE_TLB	2
-#define PPC_MSG_XMON_BREAK	3
-
-static inline void
-smp_message_pass(int target, int msg)
-{
-	if (smp_ops) {
-		atomic_inc(&ipi_sent);
-		smp_ops->message_pass(target, msg);
-	}
-}
-
-/*
- * Common functions
- */
-void smp_message_recv(int msg)
-{
-	atomic_inc(&ipi_recv);
-
-	switch( msg ) {
-	case PPC_MSG_CALL_FUNCTION:
-		smp_call_function_interrupt();
-		break;
-	case PPC_MSG_RESCHEDULE:
-		set_need_resched();
-		break;
-	case PPC_MSG_INVALIDATE_TLB:
-		_tlbia();
-		break;
-#ifdef CONFIG_XMON
-	case PPC_MSG_XMON_BREAK:
-		xmon(get_irq_regs());
-		break;
-#endif /* CONFIG_XMON */
-	default:
-		printk("SMP %d: smp_message_recv(): unknown msg %d\n",
-		       smp_processor_id(), msg);
-		break;
-	}
-}
-
-/*
- * 750's don't broadcast tlb invalidates so
- * we have to emulate that behavior.
- *   -- Cort
- */
-void smp_send_tlb_invalidate(int cpu)
-{
-	if ( PVR_VER(mfspr(SPRN_PVR)) == 8 )
-		smp_message_pass(MSG_ALL_BUT_SELF, PPC_MSG_INVALIDATE_TLB);
-}
-
-void smp_send_reschedule(int cpu)
-{
-	/*
-	 * This is only used if `cpu' is running an idle task,
-	 * so it will reschedule itself anyway...
-	 *
-	 * This isn't the case anymore since the other CPU could be
-	 * sleeping and won't reschedule until the next interrupt (such
-	 * as the timer).
-	 *  -- Cort
-	 */
-	/* This is only used if `cpu' is running an idle task,
-	   so it will reschedule itself anyway... */
-	smp_message_pass(cpu, PPC_MSG_RESCHEDULE);
-}
-
-#ifdef CONFIG_XMON
-void smp_send_xmon_break(int cpu)
-{
-	smp_message_pass(cpu, PPC_MSG_XMON_BREAK);
-}
-#endif /* CONFIG_XMON */
-
-static void stop_this_cpu(void *dummy)
-{
-	local_irq_disable();
-	while (1)
-		;
-}
-
-void smp_send_stop(void)
-{
-	smp_call_function(stop_this_cpu, NULL, 1, 0);
-}
-
-/*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
- * Stolen from the i386 version.
- */
-static DEFINE_SPINLOCK(call_lock);
-
-static struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	atomic_t started;
-	atomic_t finished;
-	int wait;
-} *call_data;
-
-/*
- * this function sends a 'generic call function' IPI to all other CPUs
- * in the system.
- */
-
-int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
-		      int wait)
-/*
- * [SUMMARY] Run a function on all other CPUs.
- * <func> The function to run. This must be fast and non-blocking.
- * <info> An arbitrary pointer to pass to the function.
- * <nonatomic> currently unused.
- * <wait> If true, wait (atomically) until function has completed on other CPUs.
- * [RETURNS] 0 on success, else a negative status code. Does not return until
- * remote CPUs are nearly ready to execute <<func>> or are or have executed.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-{
-	/* FIXME: get cpu lock with hotplug cpus, or change this to
-           bitmask. --RR */
-	if (num_online_cpus() <= 1)
-		return 0;
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-	return __smp_call_function(func, info, wait, MSG_ALL_BUT_SELF);
-}
-
-static int __smp_call_function(void (*func) (void *info), void *info,
-			       int wait, int target)
-{
-	struct call_data_struct data;
-	int ret = -1;
-	int timeout;
-	int ncpus = 1;
-
-	if (target == MSG_ALL_BUT_SELF)
-		ncpus = num_online_cpus() - 1;
-	else if (target == MSG_ALL)
-		ncpus = num_online_cpus();
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	spin_lock(&call_lock);
-	call_data = &data;
-	/* Send a message to all other CPUs and wait for them to respond */
-	smp_message_pass(target, PPC_MSG_CALL_FUNCTION);
-
-	/* Wait for response */
-	timeout = 1000000;
-	while (atomic_read(&data.started) != ncpus) {
-		if (--timeout == 0) {
-			printk("smp_call_function on cpu %d: other cpus not responding (%d)\n",
-			       smp_processor_id(), atomic_read(&data.started));
-			goto out;
-		}
-		barrier();
-		udelay(1);
-	}
-
-	if (wait) {
-		timeout = 1000000;
-		while (atomic_read(&data.finished) != ncpus) {
-			if (--timeout == 0) {
-				printk("smp_call_function on cpu %d: other cpus not finishing (%d/%d)\n",
-				       smp_processor_id(), atomic_read(&data.finished), atomic_read(&data.started));
-				goto out;
-			}
-			barrier();
-			udelay(1);
-		}
-	}
-	ret = 0;
-
- out:
-	spin_unlock(&call_lock);
-	return ret;
-}
-
-void smp_call_function_interrupt(void)
-{
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
-	int wait = call_data->wait;
-
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function
-	 */
-	atomic_inc(&call_data->started);
-	/*
-	 * At this point the info structure may be out of scope unless wait==1
-	 */
-	(*func)(info);
-	if (wait)
-		atomic_inc(&call_data->finished);
-}
-
-static void __devinit smp_store_cpu_info(int id)
-{
-        struct cpuinfo_PPC *c = &cpu_data[id];
-
-	/* assume bogomips are same for everything */
-        c->loops_per_jiffy = loops_per_jiffy;
-        c->pvr = mfspr(SPRN_PVR);
-}
-
-void __init smp_prepare_cpus(unsigned int max_cpus)
-{
-	int num_cpus, i, cpu;
-	struct task_struct *p;
-
-	/* Fixup boot cpu */
-        smp_store_cpu_info(smp_processor_id());
-	cpu_callin_map[smp_processor_id()] = 1;
-
-	if (smp_ops == NULL) {
-		printk("SMP not supported on this machine.\n");
-		return;
-	}
-
-	/* Probe platform for CPUs: always linear. */
-	num_cpus = smp_ops->probe();
-	
-	if (num_cpus < 2)
-		smp_tb_synchronized = 1;
-	
-	for (i = 0; i < num_cpus; ++i)
-		cpu_set(i, cpu_possible_map);
-
-	/* Backup CPU 0 state */
-	__save_cpu_setup();
-
-	for_each_possible_cpu(cpu) {
-		if (cpu == smp_processor_id())
-			continue;
-		/* create a process for the processor */
-		p = fork_idle(cpu);
-		if (IS_ERR(p))
-			panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
-		task_thread_info(p)->cpu = cpu;
-		idle_tasks[cpu] = p;
-	}
-}
-
-void __devinit smp_prepare_boot_cpu(void)
-{
-	cpu_set(smp_processor_id(), cpu_online_map);
-	cpu_set(smp_processor_id(), cpu_possible_map);
-}
-
-int __init setup_profiling_timer(unsigned int multiplier)
-{
-	return 0;
-}
-
-/* Processor coming up starts here */
-int __devinit start_secondary(void *unused)
-{
-	int cpu;
-
-	atomic_inc(&init_mm.mm_count);
-	current->active_mm = &init_mm;
-
-	cpu = smp_processor_id();
-        smp_store_cpu_info(cpu);
-	set_dec(tb_ticks_per_jiffy);
-	preempt_disable();
-	cpu_callin_map[cpu] = 1;
-
-	printk("CPU %d done callin...\n", cpu);
-	smp_ops->setup_cpu(cpu);
-	printk("CPU %d done setup...\n", cpu);
-	smp_ops->take_timebase();
-	printk("CPU %d done timebase take...\n", cpu);
-
-	spin_lock(&call_lock);
-	cpu_set(cpu, cpu_online_map);
-	spin_unlock(&call_lock);
-
-	local_irq_enable();
-
-	cpu_idle();
-	return 0;
-}
-
-int __cpu_up(unsigned int cpu)
-{
-	char buf[32];
-	int c;
-
-	secondary_ti = task_thread_info(idle_tasks[cpu]);
-	mb();
-
-	/*
-	 * There was a cache flush loop here to flush the cache
-	 * to memory for the first 8MB of RAM.  The cache flush
-	 * has been pushed into the kick_cpu function for those
-	 * platforms that need it.
-	 */
-
-	/* wake up cpu */
-	smp_ops->kick_cpu(cpu);
-	
-	/*
-	 * wait to see if the cpu made a callin (is actually up).
-	 * use this value that I found through experimentation.
-	 * -- Cort
-	 */
-	for (c = 1000; c && !cpu_callin_map[cpu]; c--)
-		udelay(100);
-
-	if (!cpu_callin_map[cpu]) {
-		sprintf(buf, "didn't find cpu %u", cpu);
-		if (ppc_md.progress) ppc_md.progress(buf, 0x360+cpu);
-		printk("Processor %u is stuck.\n", cpu);
-		return -ENOENT;
-	}
-
-	sprintf(buf, "found cpu %u", cpu);
-	if (ppc_md.progress) ppc_md.progress(buf, 0x350+cpu);
-	printk("Processor %d found.\n", cpu);
-
-	smp_ops->give_timebase();
-
-	/* Wait until cpu puts itself in the online map */
-	while (!cpu_online(cpu))
-		cpu_relax();
-
-	return 0;
-}
-
-void smp_cpus_done(unsigned int max_cpus)
-{
-	smp_ops->setup_cpu(0);
-}
diff --git a/arch/ppc/kernel/softemu8xx.c b/arch/ppc/kernel/softemu8xx.c
deleted file mode 100644
index 9bbb6bf7b645..000000000000
--- a/arch/ppc/kernel/softemu8xx.c
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Software emulation of some PPC instructions for the 8xx core.
- *
- * Copyright (C) 1998 Dan Malek (dmalek@jlc.net)
- *
- * Software floating emuation for the MPC8xx processor.  I did this mostly
- * because it was easier than trying to get the libraries compiled for
- * software floating point.  The goal is still to get the libraries done,
- * but I lost patience and needed some hacks to at least get init and
- * shells running.  The first problem is the setjmp/longjmp that save
- * and restore the floating point registers.
- *
- * For this emulation, our working registers are found on the register
- * save area.
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/interrupt.h>
-
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-
-extern void
-print_8xx_pte(struct mm_struct *mm, unsigned long addr);
-extern int
-get_8xx_pte(struct mm_struct *mm, unsigned long addr);
-
-/* Eventually we may need a look-up table, but this works for now.
-*/
-#define LFS	48
-#define LFD	50
-#define LFDU	51
-#define STFD	54
-#define STFDU	55
-#define FMR	63
-
-/*
- * We return 0 on success, 1 on unimplemented instruction, and EFAULT
- * if a load/store faulted.
- */
-int
-Soft_emulate_8xx(struct pt_regs *regs)
-{
-	uint	inst, instword;
-	uint	flreg, idxreg, disp;
-	uint	retval;
-	signed short sdisp;
-	uint	*ea, *ip;
-
-	retval = 0;
-
-	instword = *((uint *)regs->nip);
-	inst = instword >> 26;
-
-	flreg = (instword >> 21) & 0x1f;
-	idxreg = (instword >> 16) & 0x1f;
-	disp = instword & 0xffff;
-
-	ea = (uint *)(regs->gpr[idxreg] + disp);
-	ip = (uint *)&current->thread.fpr[flreg];
-
-	switch ( inst )
-	{
-	case LFD:
-		/* this is a 16 bit quantity that is sign extended
-		 * so use a signed short here -- Cort
-		 */
-		sdisp = (instword & 0xffff);
-		ea = (uint *)(regs->gpr[idxreg] + sdisp);
-		if (copy_from_user(ip, ea, sizeof(double)))
-			retval = -EFAULT;
-		break;
-		
-	case LFDU:
-		if (copy_from_user(ip, ea, sizeof(double)))
-			retval = -EFAULT;
-		else
-			regs->gpr[idxreg] = (uint)ea;
-		break;
-	case LFS:
-		sdisp = (instword & 0xffff);
-		ea = (uint *)(regs->gpr[idxreg] + sdisp);
-		if (copy_from_user(ip, ea, sizeof(float)))
-			retval = -EFAULT;
-		break;
-	case STFD:
-		/* this is a 16 bit quantity that is sign extended
-		 * so use a signed short here -- Cort
-		 */
-		sdisp = (instword & 0xffff);
-		ea = (uint *)(regs->gpr[idxreg] + sdisp);
-		if (copy_to_user(ea, ip, sizeof(double)))
-			retval = -EFAULT;
-		break;
-
-	case STFDU:
-		if (copy_to_user(ea, ip, sizeof(double)))
-			retval = -EFAULT;
-		else
-			regs->gpr[idxreg] = (uint)ea;
-		break;
-	case FMR:
-		/* assume this is a fp move -- Cort */
-		memcpy( ip, &current->thread.fpr[(instword>>11)&0x1f],
-			sizeof(double) );
-		break;
-	default:
-		retval = 1;
-		printk("Bad emulation %s/%d\n"
-		       " NIP: %08lx instruction: %08x opcode: %x "
-		       "A: %x B: %x C: %x code: %x rc: %x\n",
-		       current->comm,current->pid,
-		       regs->nip,
-		       instword,inst,
-		       (instword>>16)&0x1f,
-		       (instword>>11)&0x1f,
-		       (instword>>6)&0x1f,
-		       (instword>>1)&0x3ff,
-		       instword&1);
-		{
-			int pa;
-			print_8xx_pte(current->mm,regs->nip);
-			pa = get_8xx_pte(current->mm,regs->nip) & PAGE_MASK;
-			pa |= (regs->nip & ~PAGE_MASK);
-			pa = (unsigned long)__va(pa);
-			printk("Kernel VA for NIP %x ", pa);
-			print_8xx_pte(current->mm,pa);
-		}
-		
-	}
-
-	if (retval == 0)
-		regs->nip += 4;
-	return(retval);
-}
-
diff --git a/arch/ppc/kernel/time.c b/arch/ppc/kernel/time.c
deleted file mode 100644
index 18ee851e33e3..000000000000
--- a/arch/ppc/kernel/time.c
+++ /dev/null
@@ -1,445 +0,0 @@
-/*
- * Common time routines among all ppc machines.
- *
- * Written by Cort Dougan (cort@cs.nmt.edu) to merge
- * Paul Mackerras' version and mine for PReP and Pmac.
- * MPC8xx/MBX changes by Dan Malek (dmalek@jlc.net).
- *
- * First round of bugfixes by Gabriel Paubert (paubert@iram.es)
- * to make clock more stable (2.4.0-test5). The only thing
- * that this code assumes is that the timebases have been synchronized
- * by firmware on SMP and are never stopped (never do sleep
- * on SMP then, nap and doze are OK).
- *
- * TODO (not necessarily in this file):
- * - improve precision and reproducibility of timebase frequency
- * measurement at boot time.
- * - get rid of xtime_lock for gettimeofday (generic kernel problem
- * to be implemented on all architectures for SMP scalability and
- * eventually implementing gettimeofday without entering the kernel).
- * - put all time/clock related variables in a single structure
- * to minimize number of cache lines touched by gettimeofday()
- * - for astronomical applications: add a new function to get
- * non ambiguous timestamps even around leap seconds. This needs
- * a new timestamp format and a good name.
- *
- *
- * The following comment is partially obsolete (at least the long wait
- * is no more a valid reason):
- * Since the MPC8xx has a programmable interrupt timer, I decided to
- * use that rather than the decrementer.  Two reasons: 1.) the clock
- * frequency is low, causing 2.) a long wait in the timer interrupt
- *		while ((d = get_dec()) == dval)
- * loop.  The MPC8xx can be driven from a variety of input clocks,
- * so a number of assumptions have been made here because the kernel
- * parameter HZ is a constant.  We assume (correctly, today :-) that
- * the MPC8xx on the MBX board is driven from a 32.768 kHz crystal.
- * This is then divided by 4, providing a 8192 Hz clock into the PIT.
- * Since it is not possible to get a nice 100 Hz clock out of this, without
- * creating a software PLL, I have set HZ to 128.  -- Dan
- *
- * 1997-09-10  Updated NTP code according to technical memorandum Jan '96
- *             "A Kernel Model for Precision Timekeeping" by Dave Mills
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/time.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-
-#include <asm/io.h>
-#include <asm/nvram.h>
-#include <asm/cache.h>
-#include <asm/8xx_immap.h>
-#include <asm/machdep.h>
-#include <asm/irq_regs.h>
-
-#include <asm/time.h>
-
-unsigned long disarm_decr[NR_CPUS];
-
-extern struct timezone sys_tz;
-
-/* keep track of when we need to update the rtc */
-time_t last_rtc_update;
-
-/* The decrementer counts down by 128 every 128ns on a 601. */
-#define DECREMENTER_COUNT_601	(1000000000 / HZ)
-
-unsigned tb_ticks_per_jiffy;
-unsigned tb_to_us;
-unsigned tb_last_stamp;
-unsigned long tb_to_ns_scale;
-
-/* used for timezone offset */
-static long timezone_offset;
-
-DEFINE_SPINLOCK(rtc_lock);
-
-EXPORT_SYMBOL(rtc_lock);
-
-/* Timer interrupt helper function */
-static inline int tb_delta(unsigned *jiffy_stamp) {
-	int delta;
-	if (__USE_RTC()) {
-		delta = get_rtcl();
-		if (delta < *jiffy_stamp) *jiffy_stamp -= 1000000000;
-		delta -= *jiffy_stamp;
-	} else {
-		delta = get_tbl() - *jiffy_stamp;
-	}
-	return delta;
-}
-
-#ifdef CONFIG_SMP
-unsigned long profile_pc(struct pt_regs *regs)
-{
-	unsigned long pc = instruction_pointer(regs);
-
-	if (in_lock_functions(pc))
-		return regs->link;
-
-	return pc;
-}
-EXPORT_SYMBOL(profile_pc);
-#endif
-
-void wakeup_decrementer(void)
-{
-	set_dec(tb_ticks_per_jiffy);
-	/* No currently-supported powerbook has a 601,
-	 * so use get_tbl, not native
-	 */
-	last_jiffy_stamp(0) = tb_last_stamp = get_tbl();
-}
-
-/*
- * timer_interrupt - gets called when the decrementer overflows,
- * with interrupts disabled.
- * We set it up to overflow again in 1/HZ seconds.
- */
-void timer_interrupt(struct pt_regs * regs)
-{
-	struct pt_regs *old_regs;
-	int next_dec;
-	unsigned long cpu = smp_processor_id();
-	unsigned jiffy_stamp = last_jiffy_stamp(cpu);
-	extern void do_IRQ(struct pt_regs *);
-
-	if (atomic_read(&ppc_n_lost_interrupts) != 0)
-		do_IRQ(regs);
-
-	old_regs = set_irq_regs(regs);
-	irq_enter();
-
-	while ((next_dec = tb_ticks_per_jiffy - tb_delta(&jiffy_stamp)) <= 0) {
-		jiffy_stamp += tb_ticks_per_jiffy;
-		
-		profile_tick(CPU_PROFILING);
-		update_process_times(user_mode(regs));
-
-	  	if (smp_processor_id())
-			continue;
-
-		/* We are in an interrupt, no need to save/restore flags */
-		write_seqlock(&xtime_lock);
-		tb_last_stamp = jiffy_stamp;
-		do_timer(1);
-
-		/*
-		 * update the rtc when needed, this should be performed on the
-		 * right fraction of a second. Half or full second ?
-		 * Full second works on mk48t59 clocks, others need testing.
-		 * Note that this update is basically only used through
-		 * the adjtimex system calls. Setting the HW clock in
-		 * any other way is a /dev/rtc and userland business.
-		 * This is still wrong by -0.5/+1.5 jiffies because of the
-		 * timer interrupt resolution and possible delay, but here we
-		 * hit a quantization limit which can only be solved by higher
-		 * resolution timers and decoupling time management from timer
-		 * interrupts. This is also wrong on the clocks
-		 * which require being written at the half second boundary.
-		 * We should have an rtc call that only sets the minutes and
-		 * seconds like on Intel to avoid problems with non UTC clocks.
-		 */
-		if ( ppc_md.set_rtc_time && ntp_synced() &&
-		     xtime.tv_sec - last_rtc_update >= 659 &&
-		     abs((xtime.tv_nsec / 1000) - (1000000-1000000/HZ)) < 500000/HZ) {
-		  	if (ppc_md.set_rtc_time(xtime.tv_sec+1 + timezone_offset) == 0)
-				last_rtc_update = xtime.tv_sec+1;
-			else
-				/* Try again one minute later */
-				last_rtc_update += 60;
-		}
-		write_sequnlock(&xtime_lock);
-	}
-	if ( !disarm_decr[smp_processor_id()] )
-		set_dec(next_dec);
-	last_jiffy_stamp(cpu) = jiffy_stamp;
-
-	if (ppc_md.heartbeat && !ppc_md.heartbeat_count--)
-		ppc_md.heartbeat();
-
-	irq_exit();
-	set_irq_regs(old_regs);
-}
-
-/*
- * This version of gettimeofday has microsecond resolution.
- */
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long flags;
-	unsigned long seq;
-	unsigned delta, usec, sec;
-
-	do {
-		seq = read_seqbegin_irqsave(&xtime_lock, flags);
-		sec = xtime.tv_sec;
-		usec = (xtime.tv_nsec / 1000);
-		delta = tb_ticks_since(tb_last_stamp);
-#ifdef CONFIG_SMP
-		/* As long as timebases are not in sync, gettimeofday can only
-		 * have jiffy resolution on SMP.
-		 */
-		if (!smp_tb_synchronized)
-			delta = 0;
-#endif /* CONFIG_SMP */
-	} while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
-	usec += mulhwu(tb_to_us, delta);
-	while (usec >= 1000000) {
-	  	sec++;
-		usec -= 1000000;
-	}
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, new_sec = tv->tv_sec;
-	long wtm_nsec, new_nsec = tv->tv_nsec;
-	unsigned long flags;
-	int tb_delta;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irqsave(&xtime_lock, flags);
-	/* Updating the RTC is not the job of this code. If the time is
-	 * stepped under NTP, the RTC will be update after STA_UNSYNC
-	 * is cleared. Tool like clock/hwclock either copy the RTC
-	 * to the system time, in which case there is no point in writing
-	 * to the RTC again, or write to the RTC but then they don't call
-	 * settimeofday to perform this operation. Note also that
-	 * we don't touch the decrementer since:
-	 * a) it would lose timer interrupt synchronization on SMP
-	 * (if it is working one day)
-	 * b) it could make one jiffy spuriously shorter or longer
-	 * which would introduce another source of uncertainty potentially
-	 * harmful to relatively short timers.
-	 */
-
-	/* This works perfectly on SMP only if the tb are in sync but
-	 * guarantees an error < 1 jiffy even if they are off by eons,
-	 * still reasonable when gettimeofday resolution is 1 jiffy.
-	 */
-	tb_delta = tb_ticks_since(last_jiffy_stamp(smp_processor_id()));
-
-	new_nsec -= 1000 * mulhwu(tb_to_us, tb_delta);
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - new_sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - new_nsec);
-
-	set_normalized_timespec(&xtime, new_sec, new_nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	/* In case of a large backwards jump in time with NTP, we want the
-	 * clock to be updated as soon as the PLL is again in lock.
-	 */
-	last_rtc_update = new_sec - 658;
-
-	ntp_clear();
-	write_sequnlock_irqrestore(&xtime_lock, flags);
-	clock_was_set();
-	return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
-/* This function is only called on the boot processor */
-void __init time_init(void)
-{
-	time_t sec, old_sec;
-	unsigned old_stamp, stamp, elapsed;
-
-        if (ppc_md.time_init != NULL)
-                timezone_offset = ppc_md.time_init();
-
-	if (__USE_RTC()) {
-		/* 601 processor: dec counts down by 128 every 128ns */
-		tb_ticks_per_jiffy = DECREMENTER_COUNT_601;
-		/* mulhwu_scale_factor(1000000000, 1000000) is 0x418937 */
-		tb_to_us = 0x418937;
-        } else {
-                ppc_md.calibrate_decr();
-		tb_to_ns_scale = mulhwu(tb_to_us, 1000 << 10);
-	}
-
-	/* Now that the decrementer is calibrated, it can be used in case the
-	 * clock is stuck, but the fact that we have to handle the 601
-	 * makes things more complex. Repeatedly read the RTC until the
-	 * next second boundary to try to achieve some precision.  If there
-	 * is no RTC, we still need to set tb_last_stamp and
-	 * last_jiffy_stamp(cpu 0) to the current stamp.
-	 */
-	stamp = get_native_tbl();
-	if (ppc_md.get_rtc_time) {
-		sec = ppc_md.get_rtc_time();
-		elapsed = 0;
-		do {
-			old_stamp = stamp;
-			old_sec = sec;
-			stamp = get_native_tbl();
-			if (__USE_RTC() && stamp < old_stamp)
-				old_stamp -= 1000000000;
-			elapsed += stamp - old_stamp;
-			sec = ppc_md.get_rtc_time();
-		} while ( sec == old_sec && elapsed < 2*HZ*tb_ticks_per_jiffy);
-		if (sec==old_sec)
-			printk("Warning: real time clock seems stuck!\n");
-		xtime.tv_sec = sec;
-		xtime.tv_nsec = 0;
-		/* No update now, we just read the time from the RTC ! */
-		last_rtc_update = xtime.tv_sec;
-	}
-	last_jiffy_stamp(0) = tb_last_stamp = stamp;
-
-	/* Not exact, but the timer interrupt takes care of this */
-	set_dec(tb_ticks_per_jiffy);
-
-	/* If platform provided a timezone (pmac), we correct the time */
-        if (timezone_offset) {
-		sys_tz.tz_minuteswest = -timezone_offset / 60;
-		sys_tz.tz_dsttime = 0;
-		xtime.tv_sec -= timezone_offset;
-        }
-        set_normalized_timespec(&wall_to_monotonic,
-                                -xtime.tv_sec, -xtime.tv_nsec);
-}
-
-#define FEBRUARY		2
-#define	STARTOFTIME		1970
-#define SECDAY			86400L
-#define SECYR			(SECDAY * 365)
-
-/*
- * Note: this is wrong for 2100, but our signed 32-bit time_t will
- * have overflowed long before that, so who cares.  -- paulus
- */
-#define	leapyear(year)		((year) % 4 == 0)
-#define	days_in_year(a) 	(leapyear(a) ? 366 : 365)
-#define	days_in_month(a) 	(month_days[(a) - 1])
-
-static int month_days[12] = {
-	31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
-};
-
-void to_tm(int tim, struct rtc_time * tm)
-{
-	register int i;
-	register long hms, day, gday;
-
-	gday = day = tim / SECDAY;
-	hms = tim % SECDAY;
-
-	/* Hours, minutes, seconds are easy */
-	tm->tm_hour = hms / 3600;
-	tm->tm_min = (hms % 3600) / 60;
-	tm->tm_sec = (hms % 3600) % 60;
-
-	/* Number of years in days */
-	for (i = STARTOFTIME; day >= days_in_year(i); i++)
-		day -= days_in_year(i);
-	tm->tm_year = i;
-
-	/* Number of months in days left */
-	if (leapyear(tm->tm_year))
-		days_in_month(FEBRUARY) = 29;
-	for (i = 1; day >= days_in_month(i); i++)
-		day -= days_in_month(i);
-	days_in_month(FEBRUARY) = 28;
-	tm->tm_mon = i;
-
-	/* Days are what is left over (+1) from all that. */
-	tm->tm_mday = day + 1;
-
-	/*
-	 * Determine the day of week. Jan. 1, 1970 was a Thursday.
-	 */
-	tm->tm_wday = (gday + 4) % 7;
-}
-
-/* Auxiliary function to compute scaling factors */
-/* Actually the choice of a timebase running at 1/4 the of the bus
- * frequency giving resolution of a few tens of nanoseconds is quite nice.
- * It makes this computation very precise (27-28 bits typically) which
- * is optimistic considering the stability of most processor clock
- * oscillators and the precision with which the timebase frequency
- * is measured but does not harm.
- */
-unsigned mulhwu_scale_factor(unsigned inscale, unsigned outscale) {
-	unsigned mlt=0, tmp, err;
-	/* No concern for performance, it's done once: use a stupid
-	 * but safe and compact method to find the multiplier.
-	 */
-	for (tmp = 1U<<31; tmp != 0; tmp >>= 1) {
-		if (mulhwu(inscale, mlt|tmp) < outscale) mlt|=tmp;
-	}
-	/* We might still be off by 1 for the best approximation.
-	 * A side effect of this is that if outscale is too large
-	 * the returned value will be zero.
-	 * Many corner cases have been checked and seem to work,
-	 * some might have been forgotten in the test however.
-	 */
-	err = inscale*(mlt+1);
-	if (err <= inscale/2) mlt++;
-	return mlt;
-}
-
-unsigned long long sched_clock(void)
-{
-	unsigned long lo, hi, hi2;
-	unsigned long long tb;
-
-	if (!__USE_RTC()) {
-		do {
-			hi = get_tbu();
-			lo = get_tbl();
-			hi2 = get_tbu();
-		} while (hi2 != hi);
-		tb = ((unsigned long long) hi << 32) | lo;
-		tb = (tb * tb_to_ns_scale) >> 10;
-	} else {
-		do {
-			hi = get_rtcu();
-			lo = get_rtcl();
-			hi2 = get_rtcu();
-		} while (hi2 != hi);
-		tb = ((unsigned long long) hi) * 1000000000 + lo;
-	}
-	return tb;
-}
diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c
deleted file mode 100644
index a467a429c2fe..000000000000
--- a/arch/ppc/kernel/traps.c
+++ /dev/null
@@ -1,826 +0,0 @@
-/*
- *  Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *  and Paul Mackerras (paulus@cs.anu.edu.au)
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/prctl.h>
-#include <linux/bug.h>
-
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/reg.h>
-#include <asm/xmon.h>
-#include <asm/pmc.h>
-
-#ifdef CONFIG_XMON
-extern int xmon_bpt(struct pt_regs *regs);
-extern int xmon_sstep(struct pt_regs *regs);
-extern int xmon_iabr_match(struct pt_regs *regs);
-extern int xmon_dabr_match(struct pt_regs *regs);
-
-int (*debugger)(struct pt_regs *regs) = xmon;
-int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt;
-int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep;
-int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match;
-int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match;
-void (*debugger_fault_handler)(struct pt_regs *regs);
-#else
-#ifdef CONFIG_KGDB
-int (*debugger)(struct pt_regs *regs);
-int (*debugger_bpt)(struct pt_regs *regs);
-int (*debugger_sstep)(struct pt_regs *regs);
-int (*debugger_iabr_match)(struct pt_regs *regs);
-int (*debugger_dabr_match)(struct pt_regs *regs);
-void (*debugger_fault_handler)(struct pt_regs *regs);
-#else
-#define debugger(regs)			do { } while (0)
-#define debugger_bpt(regs)		0
-#define debugger_sstep(regs)		0
-#define debugger_iabr_match(regs)	0
-#define debugger_dabr_match(regs)	0
-#define debugger_fault_handler		((void (*)(struct pt_regs *))0)
-#endif
-#endif
-
-/*
- * Trap & Exception support
- */
-
-DEFINE_SPINLOCK(die_lock);
-
-int die(const char * str, struct pt_regs * fp, long err)
-{
-	static int die_counter;
-	int nl = 0;
-	console_verbose();
-	spin_lock_irq(&die_lock);
-	printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
-#ifdef CONFIG_PREEMPT
-	printk("PREEMPT ");
-	nl = 1;
-#endif
-#ifdef CONFIG_SMP
-	printk("SMP NR_CPUS=%d ", NR_CPUS);
-	nl = 1;
-#endif
-	if (nl)
-		printk("\n");
-	show_regs(fp);
-	add_taint(TAINT_DIE);
-	spin_unlock_irq(&die_lock);
-	/* do_exit() should take care of panic'ing from an interrupt
-	 * context so we don't handle it here
-	 */
-	do_exit(err);
-}
-
-void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
-{
-	siginfo_t info;
-
-	if (!user_mode(regs)) {
-		debugger(regs);
-		die("Exception in kernel mode", regs, signr);
-	}
-	info.si_signo = signr;
-	info.si_errno = 0;
-	info.si_code = code;
-	info.si_addr = (void __user *) addr;
-	force_sig_info(signr, &info, current);
-
-	/*
-	 * Init gets no signals that it doesn't have a handler for.
-	 * That's all very well, but if it has caused a synchronous
-	 * exception and we ignore the resulting signal, it will just
-	 * generate the same exception over and over again and we get
-	 * nowhere.  Better to kill it and let the kernel panic.
-	 */
-	if (is_global_init(current)) {
-		__sighandler_t handler;
-
-		spin_lock_irq(&current->sighand->siglock);
-		handler = current->sighand->action[signr-1].sa.sa_handler;
-		spin_unlock_irq(&current->sighand->siglock);
-		if (handler == SIG_DFL) {
-			/* init has generated a synchronous exception
-			   and it doesn't have a handler for the signal */
-			printk(KERN_CRIT "init has generated signal %d "
-			       "but has no handler for it\n", signr);
-			do_exit(signr);
-		}
-	}
-}
-
-/*
- * I/O accesses can cause machine checks on powermacs.
- * Check if the NIP corresponds to the address of a sync
- * instruction for which there is an entry in the exception
- * table.
- * Note that the 601 only takes a machine check on TEA
- * (transfer error ack) signal assertion, and does not
- * set any of the top 16 bits of SRR1.
- *  -- paulus.
- */
-static inline int check_io_access(struct pt_regs *regs)
-{
-#if defined CONFIG_8xx
-	unsigned long msr = regs->msr;
-	const struct exception_table_entry *entry;
-	unsigned int *nip = (unsigned int *)regs->nip;
-
-	if (((msr & 0xffff0000) == 0 || (msr & (0x80000 | 0x40000)))
-	    && (entry = search_exception_tables(regs->nip)) != NULL) {
-		/*
-		 * Check that it's a sync instruction, or somewhere
-		 * in the twi; isync; nop sequence that inb/inw/inl uses.
-		 * As the address is in the exception table
-		 * we should be able to read the instr there.
-		 * For the debug message, we look at the preceding
-		 * load or store.
-		 */
-		if (*nip == 0x60000000)		/* nop */
-			nip -= 2;
-		else if (*nip == 0x4c00012c)	/* isync */
-			--nip;
-		/* eieio from I/O string functions */
-		else if ((*nip) == 0x7c0006ac || *(nip+1) == 0x7c0006ac)
-			nip += 2;
-		if (*nip == 0x7c0004ac || (*nip >> 26) == 3 ||
-			(*(nip+1) >> 26) == 3) {
-			/* sync or twi */
-			unsigned int rb;
-
-			--nip;
-			rb = (*nip >> 11) & 0x1f;
-			printk(KERN_DEBUG "%s bad port %lx at %p\n",
-			       (*nip & 0x100)? "OUT to": "IN from",
-			       regs->gpr[rb] - _IO_BASE, nip);
-			regs->msr |= MSR_RI;
-			regs->nip = entry->fixup;
-			return 1;
-		}
-	}
-#endif /* CONFIG_8xx */
-	return 0;
-}
-
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-/* On 4xx, the reason for the machine check or program exception
-   is in the ESR. */
-#define get_reason(regs)	((regs)->dsisr)
-#define get_mc_reason(regs)	((regs)->dsisr)
-#define REASON_FP		ESR_FP
-#define REASON_ILLEGAL		(ESR_PIL | ESR_PUO)
-#define REASON_PRIVILEGED	ESR_PPR
-#define REASON_TRAP		ESR_PTR
-
-/* single-step stuff */
-#define single_stepping(regs)	(current->thread.dbcr0 & DBCR0_IC)
-#define clear_single_step(regs)	(current->thread.dbcr0 &= ~DBCR0_IC)
-
-#else
-/* On non-4xx, the reason for the machine check or program
-   exception is in the MSR. */
-#define get_reason(regs)	((regs)->msr)
-#define get_mc_reason(regs)	((regs)->msr)
-#define REASON_FP		0x100000
-#define REASON_ILLEGAL		0x80000
-#define REASON_PRIVILEGED	0x40000
-#define REASON_TRAP		0x20000
-
-#define single_stepping(regs)	((regs)->msr & MSR_SE)
-#define clear_single_step(regs)	((regs)->msr &= ~MSR_SE)
-#endif
-
-/*
- * This is "fall-back" implementation for configurations
- * which don't provide platform-specific machine check info
- */
-void __attribute__ ((weak))
-platform_machine_check(struct pt_regs *regs)
-{
-}
-
-#if defined(CONFIG_4xx)
-int machine_check_4xx(struct pt_regs *regs)
-{
-	unsigned long reason = get_mc_reason(regs);
-
-	if (reason & ESR_IMCP) {
-		printk("Instruction");
-		mtspr(SPRN_ESR, reason & ~ESR_IMCP);
-	} else
-		printk("Data");
-	printk(" machine check in kernel mode.\n");
-
-	return 0;
-}
-
-int machine_check_440A(struct pt_regs *regs)
-{
-	unsigned long reason = get_mc_reason(regs);
-
-	printk("Machine check in kernel mode.\n");
-	if (reason & ESR_IMCP){
-		printk("Instruction Synchronous Machine Check exception\n");
-		mtspr(SPRN_ESR, reason & ~ESR_IMCP);
-	}
-	else {
-		u32 mcsr = mfspr(SPRN_MCSR);
-		if (mcsr & MCSR_IB)
-			printk("Instruction Read PLB Error\n");
-		if (mcsr & MCSR_DRB)
-			printk("Data Read PLB Error\n");
-		if (mcsr & MCSR_DWB)
-			printk("Data Write PLB Error\n");
-		if (mcsr & MCSR_TLBP)
-			printk("TLB Parity Error\n");
-		if (mcsr & MCSR_ICP){
-			flush_instruction_cache();
-			printk("I-Cache Parity Error\n");
-		}
-		if (mcsr & MCSR_DCSP)
-			printk("D-Cache Search Parity Error\n");
-		if (mcsr & MCSR_DCFP)
-			printk("D-Cache Flush Parity Error\n");
-		if (mcsr & MCSR_IMPE)
-			printk("Machine Check exception is imprecise\n");
-
-		/* Clear MCSR */
-		mtspr(SPRN_MCSR, mcsr);
-	}
-	return 0;
-}
-#else
-int machine_check_generic(struct pt_regs *regs)
-{
-	unsigned long reason = get_mc_reason(regs);
-
-	printk("Machine check in kernel mode.\n");
-	printk("Caused by (from SRR1=%lx): ", reason);
-	switch (reason & 0x601F0000) {
-	case 0x80000:
-		printk("Machine check signal\n");
-		break;
-	case 0:		/* for 601 */
-	case 0x40000:
-	case 0x140000:	/* 7450 MSS error and TEA */
-		printk("Transfer error ack signal\n");
-		break;
-	case 0x20000:
-		printk("Data parity error signal\n");
-		break;
-	case 0x10000:
-		printk("Address parity error signal\n");
-		break;
-	case 0x20000000:
-		printk("L1 Data Cache error\n");
-		break;
-	case 0x40000000:
-		printk("L1 Instruction Cache error\n");
-		break;
-	case 0x00100000:
-		printk("L2 data cache parity error\n");
-		break;
-	default:
-		printk("Unknown values in msr\n");
-	}
-	return 0;
-}
-#endif /* everything else */
-
-void machine_check_exception(struct pt_regs *regs)
-{
-	int recover = 0;
-
-	if (cur_cpu_spec->machine_check)
-		recover = cur_cpu_spec->machine_check(regs);
-	if (recover > 0)
-		return;
-
-	if (user_mode(regs)) {
-		regs->msr |= MSR_RI;
-		_exception(SIGBUS, regs, BUS_ADRERR, regs->nip);
-		return;
-	}
-
-#if defined(CONFIG_8xx) && defined(CONFIG_PCI)
-	/* the qspan pci read routines can cause machine checks -- Cort */
-	bad_page_fault(regs, regs->dar, SIGBUS);
-	return;
-#endif
-
-	if (debugger_fault_handler) {
-		debugger_fault_handler(regs);
-		regs->msr |= MSR_RI;
-		return;
-	}
-
-	if (check_io_access(regs))
-		return;
-
-	/*
-	 * Optional platform-provided routine to print out
-	 * additional info, e.g. bus error registers.
-	 */
-	platform_machine_check(regs);
-
-	debugger(regs);
-	die("machine check", regs, SIGBUS);
-}
-
-void SMIException(struct pt_regs *regs)
-{
-	debugger(regs);
-#if !(defined(CONFIG_XMON) || defined(CONFIG_KGDB))
-	show_regs(regs);
-	panic("System Management Interrupt");
-#endif
-}
-
-void unknown_exception(struct pt_regs *regs)
-{
-	printk("Bad trap at PC: %lx, MSR: %lx, vector=%lx    %s\n",
-	       regs->nip, regs->msr, regs->trap, print_tainted());
-	_exception(SIGTRAP, regs, 0, 0);
-}
-
-void instruction_breakpoint_exception(struct pt_regs *regs)
-{
-	if (debugger_iabr_match(regs))
-		return;
-	_exception(SIGTRAP, regs, TRAP_BRKPT, 0);
-}
-
-void RunModeException(struct pt_regs *regs)
-{
-	_exception(SIGTRAP, regs, 0, 0);
-}
-
-/* Illegal instruction emulation support.  Originally written to
- * provide the PVR to user applications using the mfspr rd, PVR.
- * Return non-zero if we can't emulate, or -EFAULT if the associated
- * memory access caused an access fault.  Return zero on success.
- *
- * There are a couple of ways to do this, either "decode" the instruction
- * or directly match lots of bits.  In this case, matching lots of
- * bits is faster and easier.
- *
- */
-#define INST_MFSPR_PVR		0x7c1f42a6
-#define INST_MFSPR_PVR_MASK	0xfc1fffff
-
-#define INST_DCBA		0x7c0005ec
-#define INST_DCBA_MASK		0x7c0007fe
-
-#define INST_MCRXR		0x7c000400
-#define INST_MCRXR_MASK		0x7c0007fe
-
-#define INST_STRING		0x7c00042a
-#define INST_STRING_MASK	0x7c0007fe
-#define INST_STRING_GEN_MASK	0x7c00067e
-#define INST_LSWI		0x7c0004aa
-#define INST_LSWX		0x7c00042a
-#define INST_STSWI		0x7c0005aa
-#define INST_STSWX		0x7c00052a
-
-static int emulate_string_inst(struct pt_regs *regs, u32 instword)
-{
-	u8 rT = (instword >> 21) & 0x1f;
-	u8 rA = (instword >> 16) & 0x1f;
-	u8 NB_RB = (instword >> 11) & 0x1f;
-	u32 num_bytes;
-	unsigned long EA;
-	int pos = 0;
-
-	/* Early out if we are an invalid form of lswx */
-	if ((instword & INST_STRING_MASK) == INST_LSWX)
-		if ((rT == rA) || (rT == NB_RB))
-			return -EINVAL;
-
-	EA = (rA == 0) ? 0 : regs->gpr[rA];
-
-	switch (instword & INST_STRING_MASK) {
-		case INST_LSWX:
-		case INST_STSWX:
-			EA += NB_RB;
-			num_bytes = regs->xer & 0x7f;
-			break;
-		case INST_LSWI:
-		case INST_STSWI:
-			num_bytes = (NB_RB == 0) ? 32 : NB_RB;
-			break;
-		default:
-			return -EINVAL;
-	}
-
-	while (num_bytes != 0)
-	{
-		u8 val;
-		u32 shift = 8 * (3 - (pos & 0x3));
-
-		switch ((instword & INST_STRING_MASK)) {
-			case INST_LSWX:
-			case INST_LSWI:
-				if (get_user(val, (u8 __user *)EA))
-					return -EFAULT;
-				/* first time updating this reg,
-				 * zero it out */
-				if (pos == 0)
-					regs->gpr[rT] = 0;
-				regs->gpr[rT] |= val << shift;
-				break;
-			case INST_STSWI:
-			case INST_STSWX:
-				val = regs->gpr[rT] >> shift;
-				if (put_user(val, (u8 __user *)EA))
-					return -EFAULT;
-				break;
-		}
-		/* move EA to next address */
-		EA += 1;
-		num_bytes--;
-
-		/* manage our position within the register */
-		if (++pos == 4) {
-			pos = 0;
-			if (++rT == 32)
-				rT = 0;
-		}
-	}
-
-	return 0;
-}
-
-static int emulate_instruction(struct pt_regs *regs)
-{
-	u32 instword;
-	u32 rd;
-
-	if (!user_mode(regs))
-		return -EINVAL;
-	CHECK_FULL_REGS(regs);
-
-	if (get_user(instword, (u32 __user *)(regs->nip)))
-		return -EFAULT;
-
-	/* Emulate the mfspr rD, PVR.
-	 */
-	if ((instword & INST_MFSPR_PVR_MASK) == INST_MFSPR_PVR) {
-		rd = (instword >> 21) & 0x1f;
-		regs->gpr[rd] = mfspr(SPRN_PVR);
-		return 0;
-	}
-
-	/* Emulating the dcba insn is just a no-op.  */
-	if ((instword & INST_DCBA_MASK) == INST_DCBA)
-		return 0;
-
-	/* Emulate the mcrxr insn.  */
-	if ((instword & INST_MCRXR_MASK) == INST_MCRXR) {
-		int shift = (instword >> 21) & 0x1c;
-		unsigned long msk = 0xf0000000UL >> shift;
-
-		regs->ccr = (regs->ccr & ~msk) | ((regs->xer >> shift) & msk);
-		regs->xer &= ~0xf0000000UL;
-		return 0;
-	}
-
-	/* Emulate load/store string insn. */
-	if ((instword & INST_STRING_GEN_MASK) == INST_STRING)
-		return emulate_string_inst(regs, instword);
-
-	return -EINVAL;
-}
-
-/*
- * After we have successfully emulated an instruction, we have to
- * check if the instruction was being single-stepped, and if so,
- * pretend we got a single-step exception.  This was pointed out
- * by Kumar Gala.  -- paulus
- */
-static void emulate_single_step(struct pt_regs *regs)
-{
-	if (single_stepping(regs)) {
-		clear_single_step(regs);
-		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
-	}
-}
-
-int is_valid_bugaddr(unsigned long addr)
-{
-	return addr >= PAGE_OFFSET;
-}
-
-void program_check_exception(struct pt_regs *regs)
-{
-	unsigned int reason = get_reason(regs);
-	extern int do_mathemu(struct pt_regs *regs);
-
-#ifdef CONFIG_MATH_EMULATION
-	/* (reason & REASON_ILLEGAL) would be the obvious thing here,
-	 * but there seems to be a hardware bug on the 405GP (RevD)
-	 * that means ESR is sometimes set incorrectly - either to
-	 * ESR_DST (!?) or 0.  In the process of chasing this with the
-	 * hardware people - not sure if it can happen on any illegal
-	 * instruction or only on FP instructions, whether there is a
-	 * pattern to occurrences etc. -dgibson 31/Mar/2003 */
-	if (!(reason & REASON_TRAP) && do_mathemu(regs) == 0) {
-		emulate_single_step(regs);
-		return;
-	}
-#endif /* CONFIG_MATH_EMULATION */
-
-	if (reason & REASON_FP) {
-		/* IEEE FP exception */
-		int code = 0;
-		u32 fpscr;
-
-		/* We must make sure the FP state is consistent with
-		 * our MSR_FP in regs
-		 */
-		preempt_disable();
-		if (regs->msr & MSR_FP)
-			giveup_fpu(current);
-		preempt_enable();
-
-		fpscr = current->thread.fpscr.val;
-		fpscr &= fpscr << 22;	/* mask summary bits with enables */
-		if (fpscr & FPSCR_VX)
-			code = FPE_FLTINV;
-		else if (fpscr & FPSCR_OX)
-			code = FPE_FLTOVF;
-		else if (fpscr & FPSCR_UX)
-			code = FPE_FLTUND;
-		else if (fpscr & FPSCR_ZX)
-			code = FPE_FLTDIV;
-		else if (fpscr & FPSCR_XX)
-			code = FPE_FLTRES;
-		_exception(SIGFPE, regs, code, regs->nip);
-		return;
-	}
-
-	if (reason & REASON_TRAP) {
-		/* trap exception */
-		if (debugger_bpt(regs))
-			return;
-
-		if (!(regs->msr & MSR_PR) &&  /* not user-mode */
-		    report_bug(regs->nip, regs) == BUG_TRAP_TYPE_WARN) {
-			regs->nip += 4;
-			return;
-		}
-		_exception(SIGTRAP, regs, TRAP_BRKPT, 0);
-		return;
-	}
-
-	/* Try to emulate it if we should. */
-	if (reason & (REASON_ILLEGAL | REASON_PRIVILEGED)) {
-		switch (emulate_instruction(regs)) {
-		case 0:
-			regs->nip += 4;
-			emulate_single_step(regs);
-			return;
-		case -EFAULT:
-			_exception(SIGSEGV, regs, SEGV_MAPERR, regs->nip);
-			return;
-		}
-	}
-
-	if (reason & REASON_PRIVILEGED)
-		_exception(SIGILL, regs, ILL_PRVOPC, regs->nip);
-	else
-		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
-}
-
-void single_step_exception(struct pt_regs *regs)
-{
-	regs->msr &= ~(MSR_SE | MSR_BE);  /* Turn off 'trace' bits */
-	if (debugger_sstep(regs))
-		return;
-	_exception(SIGTRAP, regs, TRAP_TRACE, 0);
-}
-
-void alignment_exception(struct pt_regs *regs)
-{
-	int sig, code, fixed = 0;
-
-	fixed = fix_alignment(regs);
-	if (fixed == 1) {
-		regs->nip += 4;	/* skip over emulated instruction */
-		emulate_single_step(regs);
-		return;
-	}
-	if (fixed == -EFAULT) {
-		sig = SIGSEGV;
-		code = SEGV_ACCERR;
-	} else {
-		sig = SIGBUS;
-		code = BUS_ADRALN;
-	}
-	if (user_mode(regs))
-		_exception(sig, regs, code, regs->dar);
-	else
-		bad_page_fault(regs, regs->dar, sig);
-}
-
-void StackOverflow(struct pt_regs *regs)
-{
-	printk(KERN_CRIT "Kernel stack overflow in process %p, r1=%lx\n",
-	       current, regs->gpr[1]);
-	debugger(regs);
-	show_regs(regs);
-	panic("kernel stack overflow");
-}
-
-void nonrecoverable_exception(struct pt_regs *regs)
-{
-	printk(KERN_ERR "Non-recoverable exception at PC=%lx MSR=%lx\n",
-	       regs->nip, regs->msr);
-	debugger(regs);
-	die("nonrecoverable exception", regs, SIGKILL);
-}
-
-void trace_syscall(struct pt_regs *regs)
-{
-	printk("Task: %p(%d), PC: %08lX/%08lX, Syscall: %3ld, Result: %s%ld    %s\n",
-	       current, current->pid, regs->nip, regs->link, regs->gpr[0],
-	       regs->ccr&0x10000000?"Error=":"", regs->gpr[3], print_tainted());
-}
-
-#ifdef CONFIG_8xx
-void SoftwareEmulation(struct pt_regs *regs)
-{
-	extern int do_mathemu(struct pt_regs *);
-	extern int Soft_emulate_8xx(struct pt_regs *);
-	int errcode;
-
-	CHECK_FULL_REGS(regs);
-
-	if (!user_mode(regs)) {
-		debugger(regs);
-		die("Kernel Mode Software FPU Emulation", regs, SIGFPE);
-	}
-
-#ifdef CONFIG_MATH_EMULATION
-	errcode = do_mathemu(regs);
-#else
-	errcode = Soft_emulate_8xx(regs);
-#endif
-	if (errcode) {
-		if (errcode > 0)
-			_exception(SIGFPE, regs, 0, 0);
-		else if (errcode == -EFAULT)
-			_exception(SIGSEGV, regs, 0, 0);
-		else
-			_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
-	} else
-		emulate_single_step(regs);
-}
-#endif /* CONFIG_8xx */
-
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
-
-void DebugException(struct pt_regs *regs, unsigned long debug_status)
-{
-	if (debug_status & DBSR_IC) {	/* instruction completion */
-		regs->msr &= ~MSR_DE;
-		if (user_mode(regs)) {
-			current->thread.dbcr0 &= ~DBCR0_IC;
-		} else {
-			/* Disable instruction completion */
-			mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~DBCR0_IC);
-			/* Clear the instruction completion event */
-			mtspr(SPRN_DBSR, DBSR_IC);
-			if (debugger_sstep(regs))
-				return;
-		}
-		_exception(SIGTRAP, regs, TRAP_TRACE, 0);
-	}
-}
-#endif /* CONFIG_4xx || CONFIG_BOOKE */
-
-#if !defined(CONFIG_TAU_INT)
-void TAUException(struct pt_regs *regs)
-{
-	printk("TAU trap at PC: %lx, MSR: %lx, vector=%lx    %s\n",
-	       regs->nip, regs->msr, regs->trap, print_tainted());
-}
-#endif /* CONFIG_INT_TAU */
-
-/*
- * FP unavailable trap from kernel - print a message, but let
- * the task use FP in the kernel until it returns to user mode.
- */
-void kernel_fp_unavailable_exception(struct pt_regs *regs)
-{
-	regs->msr |= MSR_FP;
-	printk(KERN_ERR "floating point used in kernel (task=%p, pc=%lx)\n",
-	       current, regs->nip);
-}
-
-void altivec_unavailable_exception(struct pt_regs *regs)
-{
-	static int kernel_altivec_count;
-
-#ifndef CONFIG_ALTIVEC
-	if (user_mode(regs)) {
-		/* A user program has executed an altivec instruction,
-		   but this kernel doesn't support altivec. */
-		_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
-		return;
-	}
-#endif
-	/* The kernel has executed an altivec instruction without
-	   first enabling altivec.  Whinge but let it do it. */
-	if (++kernel_altivec_count < 10)
-		printk(KERN_ERR "AltiVec used in kernel (task=%p, pc=%lx)\n",
-		       current, regs->nip);
-	regs->msr |= MSR_VEC;
-}
-
-#ifdef CONFIG_ALTIVEC
-void altivec_assist_exception(struct pt_regs *regs)
-{
-	int err;
-
-	preempt_disable();
-	if (regs->msr & MSR_VEC)
-		giveup_altivec(current);
-	preempt_enable();
-	if (!user_mode(regs)) {
-		printk(KERN_ERR "altivec assist exception in kernel mode"
-		       " at %lx\n", regs->nip);
-		debugger(regs);
-		die("altivec assist exception", regs, SIGFPE);
-		return;
-	}
-
-	err = emulate_altivec(regs);
-	if (err == 0) {
-		regs->nip += 4;		/* skip emulated instruction */
-		emulate_single_step(regs);
-		return;
-	}
-
-	if (err == -EFAULT) {
-		/* got an error reading the instruction */
-		_exception(SIGSEGV, regs, SEGV_ACCERR, regs->nip);
-	} else {
-		/* didn't recognize the instruction */
-		/* XXX quick hack for now: set the non-Java bit in the VSCR */
-		printk(KERN_ERR "unrecognized altivec instruction "
-		       "in %s at %lx\n", current->comm, regs->nip);
-		current->thread.vscr.u[3] |= 0x10000;
-	}
-}
-#endif /* CONFIG_ALTIVEC */
-
-#ifdef CONFIG_BOOKE_WDT
-/*
- * Default handler for a Watchdog exception,
- * spins until a reboot occurs
- */
-void __attribute__ ((weak)) WatchdogHandler(struct pt_regs *regs)
-{
-	/* Generic WatchdogHandler, implement your own */
-	mtspr(SPRN_TCR, mfspr(SPRN_TCR)&(~TCR_WIE));
-	return;
-}
-
-void WatchdogException(struct pt_regs *regs)
-{
-	printk (KERN_EMERG "PowerPC Book-E Watchdog Exception\n");
-	WatchdogHandler(regs);
-}
-#endif
-
-void __init trap_init(void)
-{
-}
diff --git a/arch/ppc/kernel/vmlinux.lds.S b/arch/ppc/kernel/vmlinux.lds.S
deleted file mode 100644
index 8a24bc47eb6c..000000000000
--- a/arch/ppc/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,164 +0,0 @@
-#include <asm-generic/vmlinux.lds.h>
-
-OUTPUT_ARCH(powerpc:common)
-jiffies = jiffies_64 + 4;
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .gnu.hash      : { *(.gnu.hash)	}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-/*  .init          : { *(.init)	} =0*/
-  .plt : { *(.plt) }
-  .text      :
-  {
-    _text = .;
-    TEXT_TEXT
-    SCHED_TEXT
-    LOCK_TEXT
-    *(.fixup)
-    *(.got1)
-    __got2_start = .;
-    *(.got2)
-    __got2_end = .;
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-
-  RODATA
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  .fixup   : { *(.fixup) }
-
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
-
-	__bug_table : {
-		__start___bug_table = .;
-		*(__bug_table)
-		__stop___bug_table = .;
-	}
-
-  /* Read-write section, merged into data segment: */
-  . = ALIGN(4096);
-  .data    :
-  {
-    DATA_DATA
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.got.plt) *(.got)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-
-  . = ALIGN(4096);
-  __nosave_begin = .;
-  .data_nosave : { *(.data.nosave) }
-  . = ALIGN(4096);
-  __nosave_end = .;
-
-  . = ALIGN(32);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = ALIGN(8192);
-  .data.init_task : { *(.data.init_task) }
-
-  NOTES
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  }
-  /* .exit.text is discarded at runtime, not link time,
-     to deal with references from __bug_table */
-  .exit.text : { EXIT_TEXT }
-  .init.data : {
-    INIT_DATA
-    __vtop_table_begin = .;
-    *(.vtop_fixup);
-    __vtop_table_end = .;
-    __ptov_table_begin = .;
-    *(.ptov_fixup);
-    __ptov_table_end = .;
-  }
-  . = ALIGN(16);
-  __setup_start = .;
-  .init.setup : { *(.init.setup) }
-  __setup_end = .;
-  __initcall_start = .;
-  .initcall.init : {
-	INITCALLS
-  }
-  __initcall_end = .;
-
-  __con_initcall_start = .;
-  .con_initcall.init : { *(.con_initcall.init) }
-  __con_initcall_end = .;
-
-  SECURITY_INIT
-
-  __start___ftr_fixup = .;
-  __ftr_fixup : { *(__ftr_fixup) }
-  __stop___ftr_fixup = .;
-
-  PERCPU(4096)
-
-#ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(4096);
-  __initramfs_start = .;
-  .init.ramfs : { *(.init.ramfs) }
-  __initramfs_end = .;
-#endif
-
-  . = ALIGN(4096);
-  __init_end = .;
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_stop = .;
-
-  _end = . ;
-  PROVIDE (end = .);
-
-  /* Sections to be discarded. */
-  /DISCARD/ : {
-    *(.exitcall.exit)
-    EXIT_DATA
-  }
-}
diff --git a/arch/ppc/lib/Makefile b/arch/ppc/lib/Makefile
deleted file mode 100644
index 095e661e79dd..000000000000
--- a/arch/ppc/lib/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for ppc-specific library files..
-#
-
-obj-y			:= checksum.o string.o div64.o
diff --git a/arch/ppc/lib/checksum.S b/arch/ppc/lib/checksum.S
deleted file mode 100644
index 7874e8a80455..000000000000
--- a/arch/ppc/lib/checksum.S
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * This file contains assembly-language implementations
- * of IP-style 1's complement checksum routines.
- *	
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- * Severely hacked about by Paul Mackerras (paulus@cs.anu.edu.au).
- */
-
-#include <linux/sys.h>
-#include <asm/processor.h>
-#include <asm/errno.h>
-#include <asm/ppc_asm.h>
-
-	.text
-
-/*
- * ip_fast_csum(buf, len) -- Optimized for IP header
- * len is in words and is always >= 5.
- */
-_GLOBAL(ip_fast_csum)
-	lwz	r0,0(r3)
-	lwzu	r5,4(r3)
-	addic.	r4,r4,-2
-	addc	r0,r0,r5
-	mtctr	r4
-	blelr-
-1:	lwzu	r4,4(r3)
-	adde	r0,r0,r4
-	bdnz	1b
-	addze	r0,r0		/* add in final carry */
-	rlwinm	r3,r0,16,0,31	/* fold two halves together */
-	add	r3,r0,r3
-	not	r3,r3
-	srwi	r3,r3,16
-	blr
-
-/*
- * Compute checksum of TCP or UDP pseudo-header:
- *   csum_tcpudp_magic(saddr, daddr, len, proto, sum)
- */	
-_GLOBAL(csum_tcpudp_magic)
-	rlwimi	r5,r6,16,0,15	/* put proto in upper half of len */
-	addc	r0,r3,r4	/* add 4 32-bit words together */
-	adde	r0,r0,r5
-	adde	r0,r0,r7
-	addze	r0,r0		/* add in final carry */
-	rlwinm	r3,r0,16,0,31	/* fold two halves together */
-	add	r3,r0,r3
-	not	r3,r3
-	srwi	r3,r3,16
-	blr
-
-/*
- * computes the checksum of a memory block at buff, length len,
- * and adds in "sum" (32-bit)
- *
- * csum_partial(buff, len, sum)
- */
-_GLOBAL(csum_partial)
-	addic	r0,r5,0
-	subi	r3,r3,4
-	srwi.	r6,r4,2
-	beq	3f		/* if we're doing < 4 bytes */
-	andi.	r5,r3,2		/* Align buffer to longword boundary */
-	beq+	1f
-	lhz	r5,4(r3)	/* do 2 bytes to get aligned */
-	addi	r3,r3,2
-	subi	r4,r4,2
-	addc	r0,r0,r5
-	srwi.	r6,r4,2		/* # words to do */
-	beq	3f
-1:	mtctr	r6
-2:	lwzu	r5,4(r3)	/* the bdnz has zero overhead, so it should */
-	adde	r0,r0,r5	/* be unnecessary to unroll this loop */
-	bdnz	2b
-	andi.	r4,r4,3
-3:	cmpwi	0,r4,2
-	blt+	4f
-	lhz	r5,4(r3)
-	addi	r3,r3,2
-	subi	r4,r4,2
-	adde	r0,r0,r5
-4:	cmpwi	0,r4,1
-	bne+	5f
-	lbz	r5,4(r3)
-	slwi	r5,r5,8		/* Upper byte of word */
-	adde	r0,r0,r5
-5:	addze	r3,r0		/* add in final carry */
-	blr
-
-/*
- * Computes the checksum of a memory block at src, length len,
- * and adds in "sum" (32-bit), while copying the block to dst.
- * If an access exception occurs on src or dst, it stores -EFAULT
- * to *src_err or *dst_err respectively, and (for an error on
- * src) zeroes the rest of dst.
- *
- * csum_partial_copy_generic(src, dst, len, sum, src_err, dst_err)
- */
-_GLOBAL(csum_partial_copy_generic)
-	addic	r0,r6,0
-	subi	r3,r3,4
-	subi	r4,r4,4
-	srwi.	r6,r5,2
-	beq	3f		/* if we're doing < 4 bytes */
-	andi.	r9,r4,2		/* Align dst to longword boundary */
-	beq+	1f
-81:	lhz	r6,4(r3)	/* do 2 bytes to get aligned */
-	addi	r3,r3,2
-	subi	r5,r5,2
-91:	sth	r6,4(r4)
-	addi	r4,r4,2
-	addc	r0,r0,r6
-	srwi.	r6,r5,2		/* # words to do */
-	beq	3f
-1:	srwi.	r6,r5,4		/* # groups of 4 words to do */
-	beq	10f
-	mtctr	r6
-71:	lwz	r6,4(r3)
-72:	lwz	r9,8(r3)
-73:	lwz	r10,12(r3)
-74:	lwzu	r11,16(r3)
-	adde	r0,r0,r6
-75:	stw	r6,4(r4)
-	adde	r0,r0,r9
-76:	stw	r9,8(r4)
-	adde	r0,r0,r10
-77:	stw	r10,12(r4)
-	adde	r0,r0,r11
-78:	stwu	r11,16(r4)
-	bdnz	71b
-10:	rlwinm.	r6,r5,30,30,31	/* # words left to do */
-	beq	13f
-	mtctr	r6
-82:	lwzu	r9,4(r3)
-92:	stwu	r9,4(r4)
-	adde	r0,r0,r9
-	bdnz	82b
-13:	andi.	r5,r5,3
-3:	cmpwi	0,r5,2
-	blt+	4f
-83:	lhz	r6,4(r3)
-	addi	r3,r3,2
-	subi	r5,r5,2
-93:	sth	r6,4(r4)
-	addi	r4,r4,2
-	adde	r0,r0,r6
-4:	cmpwi	0,r5,1
-	bne+	5f
-84:	lbz	r6,4(r3)
-94:	stb	r6,4(r4)
-	slwi	r6,r6,8		/* Upper byte of word */
-	adde	r0,r0,r6
-5:	addze	r3,r0		/* add in final carry */
-	blr
-
-/* These shouldn't go in the fixup section, since that would
-   cause the ex_table addresses to get out of order. */
-
-src_error_4:
-	mfctr	r6		/* update # bytes remaining from ctr */
-	rlwimi	r5,r6,4,0,27
-	b	79f
-src_error_1:
-	li	r6,0
-	subi	r5,r5,2
-95:	sth	r6,4(r4)
-	addi	r4,r4,2
-79:	srwi.	r6,r5,2
-	beq	3f
-	mtctr	r6
-src_error_2:
-	li	r6,0
-96:	stwu	r6,4(r4)
-	bdnz	96b
-3:	andi.	r5,r5,3
-	beq	src_error
-src_error_3:
-	li	r6,0
-	mtctr	r5
-	addi	r4,r4,3
-97:	stbu	r6,1(r4)
-	bdnz	97b
-src_error:
-	cmpwi	0,r7,0
-	beq	1f
-	li	r6,-EFAULT
-	stw	r6,0(r7)
-1:	addze	r3,r0
-	blr
-
-dst_error:
-	cmpwi	0,r8,0
-	beq	1f
-	li	r6,-EFAULT
-	stw	r6,0(r8)
-1:	addze	r3,r0
-	blr
-
-.section __ex_table,"a"
-	.long	81b,src_error_1
-	.long	91b,dst_error
-	.long	71b,src_error_4
-	.long	72b,src_error_4
-	.long	73b,src_error_4
-	.long	74b,src_error_4
-	.long	75b,dst_error
-	.long	76b,dst_error
-	.long	77b,dst_error
-	.long	78b,dst_error
-	.long	82b,src_error_2
-	.long	92b,dst_error
-	.long	83b,src_error_3
-	.long	93b,dst_error
-	.long	84b,src_error_3
-	.long	94b,dst_error
-	.long	95b,dst_error
-	.long	96b,dst_error
-	.long	97b,dst_error
diff --git a/arch/ppc/lib/div64.S b/arch/ppc/lib/div64.S
deleted file mode 100644
index 3527569e9926..000000000000
--- a/arch/ppc/lib/div64.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Divide a 64-bit unsigned number by a 32-bit unsigned number.
- * This routine assumes that the top 32 bits of the dividend are
- * non-zero to start with.
- * On entry, r3 points to the dividend, which get overwritten with
- * the 64-bit quotient, and r4 contains the divisor.
- * On exit, r3 contains the remainder.
- *
- * Copyright (C) 2002 Paul Mackerras, IBM Corp.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <asm/ppc_asm.h>
-#include <asm/processor.h>
-
-_GLOBAL(__div64_32)
-	lwz	r5,0(r3)	# get the dividend into r5/r6
-	lwz	r6,4(r3)
-	cmplw	r5,r4
-	li	r7,0
-	li	r8,0
-	blt	1f
-	divwu	r7,r5,r4	# if dividend.hi >= divisor,
-	mullw	r0,r7,r4	# quotient.hi = dividend.hi / divisor
-	subf.	r5,r0,r5	# dividend.hi %= divisor
-	beq	3f
-1:	mr	r11,r5		# here dividend.hi != 0
-	andis.	r0,r5,0xc000
-	bne	2f
-	cntlzw	r0,r5		# we are shifting the dividend right
-	li	r10,-1		# to make it < 2^32, and shifting
-	srw	r10,r10,r0	# the divisor right the same amount,
-	add	r9,r4,r10	# rounding up (so the estimate cannot
-	andc	r11,r6,r10	# ever be too large, only too small)
-	andc	r9,r9,r10
-	or	r11,r5,r11
-	rotlw	r9,r9,r0
-	rotlw	r11,r11,r0
-	divwu	r11,r11,r9	# then we divide the shifted quantities
-2:	mullw	r10,r11,r4	# to get an estimate of the quotient,
-	mulhwu	r9,r11,r4	# multiply the estimate by the divisor,
-	subfc	r6,r10,r6	# take the product from the divisor,
-	add	r8,r8,r11	# and add the estimate to the accumulated
-	subfe.	r5,r9,r5	# quotient
-	bne	1b
-3:	cmplw	r6,r4
-	blt	4f
-	divwu	r0,r6,r4	# perform the remaining 32-bit division
-	mullw	r10,r0,r4	# and get the remainder
-	add	r8,r8,r0
-	subf	r6,r10,r6
-4:	stw	r7,0(r3)	# return the quotient in *r3
-	stw	r8,4(r3)
-	mr	r3,r6		# return the remainder in r3
-	blr
diff --git a/arch/ppc/lib/locks.c b/arch/ppc/lib/locks.c
deleted file mode 100644
index ea4aee6b20e6..000000000000
--- a/arch/ppc/lib/locks.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Locks for smp ppc
- *
- * Written by Cort Dougan (cort@cs.nmt.edu)
- */
-
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/module.h>
-#include <asm/ppc_asm.h>
-#include <asm/smp.h>
-
-#ifdef CONFIG_DEBUG_SPINLOCK
-
-#undef INIT_STUCK
-#define INIT_STUCK 200000000 /*0xffffffff*/
-
-/*
- * Try to acquire a spinlock.
- * Only does the stwcx. if the load returned 0 - the Programming
- * Environments Manual suggests not doing unnecessary stcwx.'s
- * since they may inhibit forward progress by other CPUs in getting
- * a lock.
- */
-static inline unsigned long __spin_trylock(volatile unsigned long *lock)
-{
-	unsigned long ret;
-
-	__asm__ __volatile__ ("\n\
-1:	lwarx	%0,0,%1\n\
-	cmpwi	0,%0,0\n\
-	bne	2f\n"
-	PPC405_ERR77(0,%1)
-"	stwcx.	%2,0,%1\n\
-	bne-	1b\n\
-	isync\n\
-2:"
-	: "=&r"(ret)
-	: "r"(lock), "r"(1)
-	: "cr0", "memory");
-
-	return ret;
-}
-
-void _raw_spin_lock(spinlock_t *lock)
-{
-	int cpu = smp_processor_id();
-	unsigned int stuck = INIT_STUCK;
-	while (__spin_trylock(&lock->lock)) {
-		while ((unsigned volatile long)lock->lock != 0) {
-			if (!--stuck) {
-				printk("_spin_lock(%p) CPU#%d NIP %p"
-				       " holder: cpu %ld pc %08lX\n",
-				       lock, cpu, __builtin_return_address(0),
-				       lock->owner_cpu,lock->owner_pc);
-				stuck = INIT_STUCK;
-				/* steal the lock */
-				/*xchg_u32((void *)&lock->lock,0);*/
-			}
-		}
-	}
-	lock->owner_pc = (unsigned long)__builtin_return_address(0);
-	lock->owner_cpu = cpu;
-}
-EXPORT_SYMBOL(_raw_spin_lock);
-
-int _raw_spin_trylock(spinlock_t *lock)
-{
-	if (__spin_trylock(&lock->lock))
-		return 0;
-	lock->owner_cpu = smp_processor_id();
-	lock->owner_pc = (unsigned long)__builtin_return_address(0);
-	return 1;
-}
-EXPORT_SYMBOL(_raw_spin_trylock);
-
-void _raw_spin_unlock(spinlock_t *lp)
-{
-  	if ( !lp->lock )
-		printk("_spin_unlock(%p): no lock cpu %d curr PC %p %s/%d\n",
-		       lp, smp_processor_id(), __builtin_return_address(0),
-		       current->comm, current->pid);
-	if ( lp->owner_cpu != smp_processor_id() )
-		printk("_spin_unlock(%p): cpu %d trying clear of cpu %d pc %lx val %lx\n",
-		      lp, smp_processor_id(), (int)lp->owner_cpu,
-		      lp->owner_pc,lp->lock);
-	lp->owner_pc = lp->owner_cpu = 0;
-	wmb();
-	lp->lock = 0;
-}
-EXPORT_SYMBOL(_raw_spin_unlock);
-
-/*
- * For rwlocks, zero is unlocked, -1 is write-locked,
- * positive is read-locked.
- */
-static __inline__ int __read_trylock(rwlock_t *rw)
-{
-	signed int tmp;
-
-	__asm__ __volatile__(
-"2:	lwarx	%0,0,%1		# __read_trylock\n\
-	addic.	%0,%0,1\n\
-	ble-	1f\n"
-	PPC405_ERR77(0,%1)
-"	stwcx.	%0,0,%1\n\
-	bne-	2b\n\
-	isync\n\
-1:"
-	: "=&r"(tmp)
-	: "r"(&rw->lock)
-	: "cr0", "memory");
-
-	return tmp;
-}
-
-int _raw_read_trylock(rwlock_t *rw)
-{
-	return __read_trylock(rw) > 0;
-}
-EXPORT_SYMBOL(_raw_read_trylock);
-
-void _raw_read_lock(rwlock_t *rw)
-{
-	unsigned int stuck;
-
-	while (__read_trylock(rw) <= 0) {
-		stuck = INIT_STUCK;
-		while (!read_can_lock(rw)) {
-			if (--stuck == 0) {
-				printk("_read_lock(%p) CPU#%d lock %d\n",
-				       rw, raw_smp_processor_id(), rw->lock);
-				stuck = INIT_STUCK;
-			}
-		}
-	}
-}
-EXPORT_SYMBOL(_raw_read_lock);
-
-void _raw_read_unlock(rwlock_t *rw)
-{
-	if ( rw->lock == 0 )
-		printk("_read_unlock(): %s/%d (nip %08lX) lock %d\n",
-		       current->comm,current->pid,current->thread.regs->nip,
-		      rw->lock);
-	wmb();
-	atomic_dec((atomic_t *) &(rw)->lock);
-}
-EXPORT_SYMBOL(_raw_read_unlock);
-
-void _raw_write_lock(rwlock_t *rw)
-{
-	unsigned int stuck;
-
-	while (cmpxchg(&rw->lock, 0, -1) != 0) {
-		stuck = INIT_STUCK;
-		while (!write_can_lock(rw)) {
-			if (--stuck == 0) {
-				printk("write_lock(%p) CPU#%d lock %d)\n",
-				       rw, raw_smp_processor_id(), rw->lock);
-				stuck = INIT_STUCK;
-			}
-		}
-	}
-	wmb();
-}
-EXPORT_SYMBOL(_raw_write_lock);
-
-int _raw_write_trylock(rwlock_t *rw)
-{
-	if (cmpxchg(&rw->lock, 0, -1) != 0)
-		return 0;
-	wmb();
-	return 1;
-}
-EXPORT_SYMBOL(_raw_write_trylock);
-
-void _raw_write_unlock(rwlock_t *rw)
-{
-	if (rw->lock >= 0)
-		printk("_write_lock(): %s/%d (nip %08lX) lock %d\n",
-		      current->comm,current->pid,current->thread.regs->nip,
-		      rw->lock);
-	wmb();
-	rw->lock = 0;
-}
-EXPORT_SYMBOL(_raw_write_unlock);
-
-#endif
diff --git a/arch/ppc/lib/string.S b/arch/ppc/lib/string.S
deleted file mode 100644
index 927253bfc826..000000000000
--- a/arch/ppc/lib/string.S
+++ /dev/null
@@ -1,732 +0,0 @@
-/*
- * String handling functions for PowerPC.
- *
- * Copyright (C) 1996 Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <asm/processor.h>
-#include <asm/cache.h>
-#include <asm/errno.h>
-#include <asm/ppc_asm.h>
-
-#define COPY_16_BYTES		\
-	lwz	r7,4(r4);	\
-	lwz	r8,8(r4);	\
-	lwz	r9,12(r4);	\
-	lwzu	r10,16(r4);	\
-	stw	r7,4(r6);	\
-	stw	r8,8(r6);	\
-	stw	r9,12(r6);	\
-	stwu	r10,16(r6)
-
-#define COPY_16_BYTES_WITHEX(n)	\
-8 ## n ## 0:			\
-	lwz	r7,4(r4);	\
-8 ## n ## 1:			\
-	lwz	r8,8(r4);	\
-8 ## n ## 2:			\
-	lwz	r9,12(r4);	\
-8 ## n ## 3:			\
-	lwzu	r10,16(r4);	\
-8 ## n ## 4:			\
-	stw	r7,4(r6);	\
-8 ## n ## 5:			\
-	stw	r8,8(r6);	\
-8 ## n ## 6:			\
-	stw	r9,12(r6);	\
-8 ## n ## 7:			\
-	stwu	r10,16(r6)
-
-#define COPY_16_BYTES_EXCODE(n)			\
-9 ## n ## 0:					\
-	addi	r5,r5,-(16 * n);		\
-	b	104f;				\
-9 ## n ## 1:					\
-	addi	r5,r5,-(16 * n);		\
-	b	105f;				\
-.section __ex_table,"a";			\
-	.align	2;				\
-	.long	8 ## n ## 0b,9 ## n ## 0b;	\
-	.long	8 ## n ## 1b,9 ## n ## 0b;	\
-	.long	8 ## n ## 2b,9 ## n ## 0b;	\
-	.long	8 ## n ## 3b,9 ## n ## 0b;	\
-	.long	8 ## n ## 4b,9 ## n ## 1b;	\
-	.long	8 ## n ## 5b,9 ## n ## 1b;	\
-	.long	8 ## n ## 6b,9 ## n ## 1b;	\
-	.long	8 ## n ## 7b,9 ## n ## 1b;	\
-	.text
-
-	.text
-	.stabs	"arch/ppc/lib/",N_SO,0,0,0f
-	.stabs	"string.S",N_SO,0,0,0f
-
-CACHELINE_BYTES = L1_CACHE_BYTES
-LG_CACHELINE_BYTES = L1_CACHE_SHIFT
-CACHELINE_MASK = (L1_CACHE_BYTES-1)
-
-_GLOBAL(strcpy)
-	addi	r5,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	stbu	r0,1(r5)
-	bne	1b
-	blr
-
-/* This clears out any unused part of the destination buffer,
-   just as the libc version does.  -- paulus */
-_GLOBAL(strncpy)
-	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r6,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	stbu	r0,1(r6)
-	bdnzf	2,1b		/* dec ctr, branch if ctr != 0 && !cr0.eq */
-	bnelr			/* if we didn't hit a null char, we're done */
-	mfctr	r5
-	cmpwi	0,r5,0		/* any space left in destination buffer? */
-	beqlr			/* we know r0 == 0 here */
-2:	stbu	r0,1(r6)	/* clear it out if so */
-	bdnz	2b
-	blr
-
-_GLOBAL(strcat)
-	addi	r5,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r0,1(r5)
-	cmpwi	0,r0,0
-	bne	1b
-	addi	r5,r5,-1
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	stbu	r0,1(r5)
-	bne	1b
-	blr
-
-_GLOBAL(strcmp)
-	addi	r5,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r3,1(r5)
-	cmpwi	1,r3,0
-	lbzu	r0,1(r4)
-	subf.	r3,r0,r3
-	beqlr	1
-	beq	1b
-	blr
-
-_GLOBAL(strncmp)
-	PPC_LCMPI r5,0
-	beqlr
-	mtctr	r5
-	addi	r5,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r3,1(r5)
-	cmpwi	1,r3,0
-	lbzu	r0,1(r4)
-	subf.	r3,r0,r3
-	beqlr	1
-	bdnzt	eq,1b
-	blr
-
-_GLOBAL(strlen)
-	addi	r4,r3,-1
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	bne	1b
-	subf	r3,r3,r4
-	blr
-
-/*
- * Use dcbz on the complete cache lines in the destination
- * to set them to zero.  This requires that the destination
- * area is cacheable.  -- paulus
- */
-_GLOBAL(cacheable_memzero)
-	mr	r5,r4
-	li	r4,0
-	addi	r6,r3,-4
-	cmplwi	0,r5,4
-	blt	7f
-	stwu	r4,4(r6)
-	beqlr
-	andi.	r0,r6,3
-	add	r5,r0,r5
-	subf	r6,r0,r6
-	clrlwi	r7,r6,32-LG_CACHELINE_BYTES
-	add	r8,r7,r5
-	srwi	r9,r8,LG_CACHELINE_BYTES
-	addic.	r9,r9,-1	/* total number of complete cachelines */
-	ble	2f
-	xori	r0,r7,CACHELINE_MASK & ~3
-	srwi.	r0,r0,2
-	beq	3f
-	mtctr	r0
-4:	stwu	r4,4(r6)
-	bdnz	4b
-3:	mtctr	r9
-	li	r7,4
-#if !defined(CONFIG_8xx)
-10:	dcbz	r7,r6
-#else
-10:	stw	r4, 4(r6)
-	stw	r4, 8(r6)
-	stw	r4, 12(r6)
-	stw	r4, 16(r6)
-#if CACHE_LINE_SIZE >= 32
-	stw	r4, 20(r6)
-	stw	r4, 24(r6)
-	stw	r4, 28(r6)
-	stw	r4, 32(r6)
-#endif /* CACHE_LINE_SIZE */
-#endif
-	addi	r6,r6,CACHELINE_BYTES
-	bdnz	10b
-	clrlwi	r5,r8,32-LG_CACHELINE_BYTES
-	addi	r5,r5,4
-2:	srwi	r0,r5,2
-	mtctr	r0
-	bdz	6f
-1:	stwu	r4,4(r6)
-	bdnz	1b
-6:	andi.	r5,r5,3
-7:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r6,r6,3
-8:	stbu	r4,1(r6)
-	bdnz	8b
-	blr
-
-_GLOBAL(memset)
-	rlwimi	r4,r4,8,16,23
-	rlwimi	r4,r4,16,0,15
-	addi	r6,r3,-4
-	cmplwi	0,r5,4
-	blt	7f
-	stwu	r4,4(r6)
-	beqlr
-	andi.	r0,r6,3
-	add	r5,r0,r5
-	subf	r6,r0,r6
-	srwi	r0,r5,2
-	mtctr	r0
-	bdz	6f
-1:	stwu	r4,4(r6)
-	bdnz	1b
-6:	andi.	r5,r5,3
-7:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r6,r6,3
-8:	stbu	r4,1(r6)
-	bdnz	8b
-	blr
-
-/*
- * This version uses dcbz on the complete cache lines in the
- * destination area to reduce memory traffic.  This requires that
- * the destination area is cacheable.
- * We only use this version if the source and dest don't overlap.
- * -- paulus.
- */
-_GLOBAL(cacheable_memcpy)
-	add	r7,r3,r5		/* test if the src & dst overlap */
-	add	r8,r4,r5
-	cmplw	0,r4,r7
-	cmplw	1,r3,r8
-	crand	0,0,4			/* cr0.lt &= cr1.lt */
-	blt	memcpy			/* if regions overlap */
-
-	addi	r4,r4,-4
-	addi	r6,r3,-4
-	neg	r0,r3
-	andi.	r0,r0,CACHELINE_MASK	/* # bytes to start of cache line */
-	beq	58f
-
-	cmplw	0,r5,r0			/* is this more than total to do? */
-	blt	63f			/* if not much to do */
-	andi.	r8,r0,3			/* get it word-aligned first */
-	subf	r5,r0,r5
-	mtctr	r8
-	beq+	61f
-70:	lbz	r9,4(r4)		/* do some bytes */
-	stb	r9,4(r6)
-	addi	r4,r4,1
-	addi	r6,r6,1
-	bdnz	70b
-61:	srwi.	r0,r0,2
-	mtctr	r0
-	beq	58f
-72:	lwzu	r9,4(r4)		/* do some words */
-	stwu	r9,4(r6)
-	bdnz	72b
-
-58:	srwi.	r0,r5,LG_CACHELINE_BYTES /* # complete cachelines */
-	clrlwi	r5,r5,32-LG_CACHELINE_BYTES
-	li	r11,4
-	mtctr	r0
-	beq	63f
-53:
-#if !defined(CONFIG_8xx)
-	dcbz	r11,r6
-#endif
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 32
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 64
-	COPY_16_BYTES
-	COPY_16_BYTES
-#if L1_CACHE_BYTES >= 128
-	COPY_16_BYTES
-	COPY_16_BYTES
-	COPY_16_BYTES
-	COPY_16_BYTES
-#endif
-#endif
-#endif
-	bdnz	53b
-
-63:	srwi.	r0,r5,2
-	mtctr	r0
-	beq	64f
-30:	lwzu	r0,4(r4)
-	stwu	r0,4(r6)
-	bdnz	30b
-
-64:	andi.	r0,r5,3
-	mtctr	r0
-	beq+	65f
-40:	lbz	r0,4(r4)
-	stb	r0,4(r6)
-	addi	r4,r4,1
-	addi	r6,r6,1
-	bdnz	40b
-65:	blr
-
-_GLOBAL(memmove)
-	cmplw	0,r3,r4
-	bgt	backwards_memcpy
-	/* fall through */
-
-_GLOBAL(memcpy)
-	srwi.	r7,r5,3
-	addi	r6,r3,-4
-	addi	r4,r4,-4
-	beq	2f			/* if less than 8 bytes to do */
-	andi.	r0,r6,3			/* get dest word aligned */
-	mtctr	r7
-	bne	5f
-1:	lwz	r7,4(r4)
-	lwzu	r8,8(r4)
-	stw	r7,4(r6)
-	stwu	r8,8(r6)
-	bdnz	1b
-	andi.	r5,r5,7
-2:	cmplwi	0,r5,4
-	blt	3f
-	lwzu	r0,4(r4)
-	addi	r5,r5,-4
-	stwu	r0,4(r6)
-3:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-	addi	r4,r4,3
-	addi	r6,r6,3
-4:	lbzu	r0,1(r4)
-	stbu	r0,1(r6)
-	bdnz	4b
-	blr
-5:	subfic	r0,r0,4
-	mtctr	r0
-6:	lbz	r7,4(r4)
-	addi	r4,r4,1
-	stb	r7,4(r6)
-	addi	r6,r6,1
-	bdnz	6b
-	subf	r5,r0,r5
-	rlwinm.	r7,r5,32-3,3,31
-	beq	2b
-	mtctr	r7
-	b	1b
-
-_GLOBAL(backwards_memcpy)
-	rlwinm.	r7,r5,32-3,3,31		/* r0 = r5 >> 3 */
-	add	r6,r3,r5
-	add	r4,r4,r5
-	beq	2f
-	andi.	r0,r6,3
-	mtctr	r7
-	bne	5f
-1:	lwz	r7,-4(r4)
-	lwzu	r8,-8(r4)
-	stw	r7,-4(r6)
-	stwu	r8,-8(r6)
-	bdnz	1b
-	andi.	r5,r5,7
-2:	cmplwi	0,r5,4
-	blt	3f
-	lwzu	r0,-4(r4)
-	subi	r5,r5,4
-	stwu	r0,-4(r6)
-3:	cmpwi	0,r5,0
-	beqlr
-	mtctr	r5
-4:	lbzu	r0,-1(r4)
-	stbu	r0,-1(r6)
-	bdnz	4b
-	blr
-5:	mtctr	r0
-6:	lbzu	r7,-1(r4)
-	stbu	r7,-1(r6)
-	bdnz	6b
-	subf	r5,r0,r5
-	rlwinm.	r7,r5,32-3,3,31
-	beq	2b
-	mtctr	r7
-	b	1b
-
-_GLOBAL(memcmp)
-	cmpwi	0,r5,0
-	ble-	2f
-	mtctr	r5
-	addi	r6,r3,-1
-	addi	r4,r4,-1
-1:	lbzu	r3,1(r6)
-	lbzu	r0,1(r4)
-	subf.	r3,r0,r3
-	bdnzt	2,1b
-	blr
-2:	li	r3,0
-	blr
-
-_GLOBAL(memchr)
-	cmpwi	0,r5,0
-	ble-	2f
-	mtctr	r5
-	addi	r3,r3,-1
-1:	lbzu	r0,1(r3)
-	cmpw	0,r0,r4
-	bdnzf	2,1b
-	beqlr
-2:	li	r3,0
-	blr
-
-_GLOBAL(__copy_tofrom_user)
-	addi	r4,r4,-4
-	addi	r6,r3,-4
-	neg	r0,r3
-	andi.	r0,r0,CACHELINE_MASK	/* # bytes to start of cache line */
-	beq	58f
-
-	cmplw	0,r5,r0			/* is this more than total to do? */
-	blt	63f			/* if not much to do */
-	andi.	r8,r0,3			/* get it word-aligned first */
-	mtctr	r8
-	beq+	61f
-70:	lbz	r9,4(r4)		/* do some bytes */
-71:	stb	r9,4(r6)
-	addi	r4,r4,1
-	addi	r6,r6,1
-	bdnz	70b
-61:	subf	r5,r0,r5
-	srwi.	r0,r0,2
-	mtctr	r0
-	beq	58f
-72:	lwzu	r9,4(r4)		/* do some words */
-73:	stwu	r9,4(r6)
-	bdnz	72b
-
-	.section __ex_table,"a"
-	.align	2
-	.long	70b,100f
-	.long	71b,101f
-	.long	72b,102f
-	.long	73b,103f
-	.text
-
-58:	srwi.	r0,r5,LG_CACHELINE_BYTES /* # complete cachelines */
-	clrlwi	r5,r5,32-LG_CACHELINE_BYTES
-	li	r11,4
-	beq	63f
-
-#ifdef CONFIG_8xx
-	/* Don't use prefetch on 8xx */
-	mtctr	r0
-	li	r0,0
-53:	COPY_16_BYTES_WITHEX(0)
-	bdnz	53b
-
-#else /* not CONFIG_8xx */
-	/* Here we decide how far ahead to prefetch the source */
-	li	r3,4
-	cmpwi	r0,1
-	li	r7,0
-	ble	114f
-	li	r7,1
-#if MAX_COPY_PREFETCH > 1
-	/* Heuristically, for large transfers we prefetch
-	   MAX_COPY_PREFETCH cachelines ahead.  For small transfers
-	   we prefetch 1 cacheline ahead. */
-	cmpwi	r0,MAX_COPY_PREFETCH
-	ble	112f
-	li	r7,MAX_COPY_PREFETCH
-112:	mtctr	r7
-111:	dcbt	r3,r4
-	addi	r3,r3,CACHELINE_BYTES
-	bdnz	111b
-#else
-	dcbt	r3,r4
-	addi	r3,r3,CACHELINE_BYTES
-#endif /* MAX_COPY_PREFETCH > 1 */
-
-114:	subf	r8,r7,r0
-	mr	r0,r7
-	mtctr	r8
-
-53:	dcbt	r3,r4
-54:	dcbz	r11,r6
-	.section __ex_table,"a"
-	.align	2
-	.long	54b,105f
-	.text
-/* the main body of the cacheline loop */
-	COPY_16_BYTES_WITHEX(0)
-#if L1_CACHE_BYTES >= 32
-	COPY_16_BYTES_WITHEX(1)
-#if L1_CACHE_BYTES >= 64
-	COPY_16_BYTES_WITHEX(2)
-	COPY_16_BYTES_WITHEX(3)
-#if L1_CACHE_BYTES >= 128
-	COPY_16_BYTES_WITHEX(4)
-	COPY_16_BYTES_WITHEX(5)
-	COPY_16_BYTES_WITHEX(6)
-	COPY_16_BYTES_WITHEX(7)
-#endif
-#endif
-#endif
-	bdnz	53b
-	cmpwi	r0,0
-	li	r3,4
-	li	r7,0
-	bne	114b
-#endif /* CONFIG_8xx */
-
-63:	srwi.	r0,r5,2
-	mtctr	r0
-	beq	64f
-30:	lwzu	r0,4(r4)
-31:	stwu	r0,4(r6)
-	bdnz	30b
-
-64:	andi.	r0,r5,3
-	mtctr	r0
-	beq+	65f
-40:	lbz	r0,4(r4)
-41:	stb	r0,4(r6)
-	addi	r4,r4,1
-	addi	r6,r6,1
-	bdnz	40b
-65:	li	r3,0
-	blr
-
-/* read fault, initial single-byte copy */
-100:	li	r9,0
-	b	90f
-/* write fault, initial single-byte copy */
-101:	li	r9,1
-90:	subf	r5,r8,r5
-	li	r3,0
-	b	99f
-/* read fault, initial word copy */
-102:	li	r9,0
-	b	91f
-/* write fault, initial word copy */
-103:	li	r9,1
-91:	li	r3,2
-	b	99f
-
-/*
- * this stuff handles faults in the cacheline loop and branches to either
- * 104f (if in read part) or 105f (if in write part), after updating r5
- */
-	COPY_16_BYTES_EXCODE(0)
-#if L1_CACHE_BYTES >= 32
-	COPY_16_BYTES_EXCODE(1)
-#if L1_CACHE_BYTES >= 64
-	COPY_16_BYTES_EXCODE(2)
-	COPY_16_BYTES_EXCODE(3)
-#if L1_CACHE_BYTES >= 128
-	COPY_16_BYTES_EXCODE(4)
-	COPY_16_BYTES_EXCODE(5)
-	COPY_16_BYTES_EXCODE(6)
-	COPY_16_BYTES_EXCODE(7)
-#endif
-#endif
-#endif
-
-/* read fault in cacheline loop */
-104:	li	r9,0
-	b	92f
-/* fault on dcbz (effectively a write fault) */
-/* or write fault in cacheline loop */
-105:	li	r9,1
-92:	li	r3,LG_CACHELINE_BYTES
-	mfctr	r8
-	add	r0,r0,r8
-	b	106f
-/* read fault in final word loop */
-108:	li	r9,0
-	b	93f
-/* write fault in final word loop */
-109:	li	r9,1
-93:	andi.	r5,r5,3
-	li	r3,2
-	b	99f
-/* read fault in final byte loop */
-110:	li	r9,0
-	b	94f
-/* write fault in final byte loop */
-111:	li	r9,1
-94:	li	r5,0
-	li	r3,0
-/*
- * At this stage the number of bytes not copied is
- * r5 + (ctr << r3), and r9 is 0 for read or 1 for write.
- */
-99:	mfctr	r0
-106:	slw	r3,r0,r3
-	add.	r3,r3,r5
-	beq	120f			/* shouldn't happen */
-	cmpwi	0,r9,0
-	bne	120f
-/* for a read fault, first try to continue the copy one byte at a time */
-	mtctr	r3
-130:	lbz	r0,4(r4)
-131:	stb	r0,4(r6)
-	addi	r4,r4,1
-	addi	r6,r6,1
-	bdnz	130b
-/* then clear out the destination: r3 bytes starting at 4(r6) */
-132:	mfctr	r3
-	srwi.	r0,r3,2
-	li	r9,0
-	mtctr	r0
-	beq	113f
-112:	stwu	r9,4(r6)
-	bdnz	112b
-113:	andi.	r0,r3,3
-	mtctr	r0
-	beq	120f
-114:	stb	r9,4(r6)
-	addi	r6,r6,1
-	bdnz	114b
-120:	blr
-
-	.section __ex_table,"a"
-	.align	2
-	.long	30b,108b
-	.long	31b,109b
-	.long	40b,110b
-	.long	41b,111b
-	.long	130b,132b
-	.long	131b,120b
-	.long	112b,120b
-	.long	114b,120b
-	.text
-
-_GLOBAL(__clear_user)
-	addi	r6,r3,-4
-	li	r3,0
-	li	r5,0
-	cmplwi	0,r4,4
-	blt	7f
-	/* clear a single word */
-11:	stwu	r5,4(r6)
-	beqlr
-	/* clear word sized chunks */
-	andi.	r0,r6,3
-	add	r4,r0,r4
-	subf	r6,r0,r6
-	srwi	r0,r4,2
-	andi.	r4,r4,3
-	mtctr	r0
-	bdz	7f
-1:	stwu	r5,4(r6)
-	bdnz	1b
-	/* clear byte sized chunks */
-7:	cmpwi	0,r4,0
-	beqlr
-	mtctr	r4
-	addi	r6,r6,3
-8:	stbu	r5,1(r6)
-	bdnz	8b
-	blr
-90:	mr	r3,r4
-	blr
-91:	mfctr	r3
-	slwi	r3,r3,2
-	add	r3,r3,r4
-	blr
-92:	mfctr	r3
-	blr
-
-	.section __ex_table,"a"
-	.align	2
-	.long	11b,90b
-	.long	1b,91b
-	.long	8b,92b
-	.text
-
-_GLOBAL(__strncpy_from_user)
-	addi	r6,r3,-1
-	addi	r4,r4,-1
-	cmpwi	0,r5,0
-	beq	2f
-	mtctr	r5
-1:	lbzu	r0,1(r4)
-	cmpwi	0,r0,0
-	stbu	r0,1(r6)
-	bdnzf	2,1b		/* dec ctr, branch if ctr != 0 && !cr0.eq */
-	beq	3f
-2:	addi	r6,r6,1
-3:	subf	r3,r3,r6
-	blr
-99:	li	r3,-EFAULT
-	blr
-
-	.section __ex_table,"a"
-	.align	2
-	.long	1b,99b
-	.text
-
-/* r3 = str, r4 = len (> 0), r5 = top (highest addr) */
-_GLOBAL(__strnlen_user)
-	addi	r7,r3,-1
-	subf	r6,r7,r5	/* top+1 - str */
-	cmplw	0,r4,r6
-	bge	0f
-	mr	r6,r4
-0:	mtctr	r6		/* ctr = min(len, top - str) */
-1:	lbzu	r0,1(r7)	/* get next byte */
-	cmpwi	0,r0,0
-	bdnzf	2,1b		/* loop if --ctr != 0 && byte != 0 */
-	addi	r7,r7,1
-	subf	r3,r3,r7	/* number of bytes we have looked at */
-	beqlr			/* return if we found a 0 byte */
-	cmpw	0,r3,r4		/* did we look at all len bytes? */
-	blt	99f		/* if not, must have hit top */
-	addi	r3,r4,1		/* return len + 1 to indicate no null found */
-	blr
-99:	li	r3,0		/* bad address, return 0 */
-	blr
-
-	.section __ex_table,"a"
-	.align	2
-	.long	1b,99b
diff --git a/arch/ppc/mm/44x_mmu.c b/arch/ppc/mm/44x_mmu.c
deleted file mode 100644
index fbb577a0d165..000000000000
--- a/arch/ppc/mm/44x_mmu.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Modifications by Matt Porter (mporter@mvista.com) to support
- * PPC44x Book E processors.
- *
- * This file contains the routines for initializing the MMU
- * on the 4xx series of chips.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/highmem.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-
-#include "mmu_decl.h"
-
-extern char etext[], _stext[];
-
-/* Used by the 44x TLB replacement exception handler.
- * Just needed it declared someplace.
- */
-unsigned int tlb_44x_index = 0;
-unsigned int tlb_44x_hwater = PPC4XX_TLB_SIZE - 1 - PPC44x_EARLY_TLBS;
-int icache_44x_need_flush;
-
-/*
- * "Pins" a 256MB TLB entry in AS0 for kernel lowmem
- */
-static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys)
-{
-	__asm__ __volatile__(
-		"tlbwe	%2,%3,%4\n"
-		"tlbwe	%1,%3,%5\n"
-		"tlbwe	%0,%3,%6\n"
-	:
-	: "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G),
-	  "r" (phys),
-	  "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M),
-	  "r" (tlb_44x_hwater--), /* slot for this TLB entry */
-	  "i" (PPC44x_TLB_PAGEID),
-	  "i" (PPC44x_TLB_XLAT),
-	  "i" (PPC44x_TLB_ATTRIB));
-}
-
-void __init MMU_init_hw(void)
-{
-	flush_instruction_cache();
-}
-
-unsigned long __init mmu_mapin_ram(void)
-{
-	unsigned long addr;
-
-	/* Pin in enough TLBs to cover any lowmem not covered by the
-	 * initial 256M mapping established in head_44x.S */
-	for (addr = PPC_PIN_SIZE; addr < total_lowmem;
-	     addr += PPC_PIN_SIZE)
-		ppc44x_pin_tlb(addr + PAGE_OFFSET, addr);
-
-	return total_lowmem;
-}
diff --git a/arch/ppc/mm/4xx_mmu.c b/arch/ppc/mm/4xx_mmu.c
deleted file mode 100644
index ea785dbaac7c..000000000000
--- a/arch/ppc/mm/4xx_mmu.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * This file contains the routines for initializing the MMU
- * on the 4xx series of chips.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/stddef.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/highmem.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/uaccess.h>
-#include <asm/smp.h>
-#include <asm/bootx.h>
-#include <asm/machdep.h>
-#include <asm/setup.h>
-#include "mmu_decl.h"
-
-extern int __map_without_ltlbs;
-/*
- * MMU_init_hw does the chip-specific initialization of the MMU hardware.
- */
-void __init MMU_init_hw(void)
-{
-	/*
-	 * The Zone Protection Register (ZPR) defines how protection will
-	 * be applied to every page which is a member of a given zone. At
-	 * present, we utilize only two of the 4xx's zones.
-	 * The zone index bits (of ZSEL) in the PTE are used for software
-	 * indicators, except the LSB.  For user access, zone 1 is used,
-	 * for kernel access, zone 0 is used.  We set all but zone 1
-	 * to zero, allowing only kernel access as indicated in the PTE.
-	 * For zone 1, we set a 01 binary (a value of 10 will not work)
-	 * to allow user access as indicated in the PTE.  This also allows
-	 * kernel access as indicated in the PTE.
-	 */
-
-        mtspr(SPRN_ZPR, 0x10000000);
-
-	flush_instruction_cache();
-
-	/*
-	 * Set up the real-mode cache parameters for the exception vector
-	 * handlers (which are run in real-mode).
-	 */
-
-        mtspr(SPRN_DCWR, 0x00000000);	/* All caching is write-back */
-
-        /*
-	 * Cache instruction and data space where the exception
-	 * vectors and the kernel live in real-mode.
-	 */
-
-        mtspr(SPRN_DCCR, 0xF0000000);	/* 512 MB of data space at 0x0. */
-        mtspr(SPRN_ICCR, 0xF0000000);	/* 512 MB of instr. space at 0x0. */
-}
-
-#define LARGE_PAGE_SIZE_16M	(1<<24)
-#define LARGE_PAGE_SIZE_4M	(1<<22)
-
-unsigned long __init mmu_mapin_ram(void)
-{
-	unsigned long v, s;
-	phys_addr_t p;
-
-	v = KERNELBASE;
-	p = PPC_MEMSTART;
-	s = total_lowmem;
-
-	if (__map_without_ltlbs)
-		return 0;
-
-	while (s >= LARGE_PAGE_SIZE_16M) {
-		pmd_t *pmdp;
-		unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
-
-		pmdp = pmd_offset(pgd_offset_k(v), v);
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
-		pmd_val(*pmdp++) = val;
-
-		v += LARGE_PAGE_SIZE_16M;
-		p += LARGE_PAGE_SIZE_16M;
-		s -= LARGE_PAGE_SIZE_16M;
-	}
-
-	while (s >= LARGE_PAGE_SIZE_4M) {
-		pmd_t *pmdp;
-		unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
-
-		pmdp = pmd_offset(pgd_offset_k(v), v);
-		pmd_val(*pmdp) = val;
-
-		v += LARGE_PAGE_SIZE_4M;
-		p += LARGE_PAGE_SIZE_4M;
-		s -= LARGE_PAGE_SIZE_4M;
-	}
-
-	return total_lowmem - s;
-}
diff --git a/arch/ppc/mm/Makefile b/arch/ppc/mm/Makefile
deleted file mode 100644
index 691ba2bae05d..000000000000
--- a/arch/ppc/mm/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Makefile for the linux ppc-specific parts of the memory manager.
-#
-
-obj-y				:= fault.o init.o mem_pieces.o \
-					mmu_context.o pgtable.o
-
-obj-$(CONFIG_PPC_STD_MMU)	+= hashtable.o ppc_mmu.o tlb.o
-obj-$(CONFIG_40x)		+= 4xx_mmu.o
-obj-$(CONFIG_44x)		+= 44x_mmu.o
diff --git a/arch/ppc/mm/fault.c b/arch/ppc/mm/fault.c
deleted file mode 100644
index 36c0e7529edb..000000000000
--- a/arch/ppc/mm/fault.c
+++ /dev/null
@@ -1,436 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Derived from "arch/i386/mm/fault.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  Modified by Cort Dougan and Paul Mackerras.
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/highmem.h>
-#include <linux/module.h>
-
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/mmu_context.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/tlbflush.h>
-
-#if defined(CONFIG_XMON) || defined(CONFIG_KGDB)
-extern void (*debugger)(struct pt_regs *);
-extern void (*debugger_fault_handler)(struct pt_regs *);
-extern int (*debugger_dabr_match)(struct pt_regs *);
-int debugger_kernel_faults = 1;
-#endif
-
-unsigned long htab_reloads;	/* updated by hashtable.S:hash_page() */
-unsigned long htab_evicts; 	/* updated by hashtable.S:hash_page() */
-unsigned long htab_preloads;	/* updated by hashtable.S:add_hash_page() */
-unsigned long pte_misses;	/* updated by do_page_fault() */
-unsigned long pte_errors;	/* updated by do_page_fault() */
-unsigned int probingmem;
-
-/*
- * Check whether the instruction at regs->nip is a store using
- * an update addressing form which will update r1.
- */
-static int store_updates_sp(struct pt_regs *regs)
-{
-	unsigned int inst;
-
-	if (get_user(inst, (unsigned int __user *)regs->nip))
-		return 0;
-	/* check for 1 in the rA field */
-	if (((inst >> 16) & 0x1f) != 1)
-		return 0;
-	/* check major opcode */
-	switch (inst >> 26) {
-	case 37:	/* stwu */
-	case 39:	/* stbu */
-	case 45:	/* sthu */
-	case 53:	/* stfsu */
-	case 55:	/* stfdu */
-		return 1;
-	case 31:
-		/* check minor opcode */
-		switch ((inst >> 1) & 0x3ff) {
-		case 183:	/* stwux */
-		case 247:	/* stbux */
-		case 439:	/* sthux */
-		case 695:	/* stfsux */
-		case 759:	/* stfdux */
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * For 600- and 800-family processors, the error_code parameter is DSISR
- * for a data fault, SRR1 for an instruction fault. For 400-family processors
- * the error_code parameter is ESR for a data fault, 0 for an instruction
- * fault.
- */
-int do_page_fault(struct pt_regs *regs, unsigned long address,
-		  unsigned long error_code)
-{
-	struct vm_area_struct * vma;
-	struct mm_struct *mm = current->mm;
-	siginfo_t info;
-	int code = SEGV_MAPERR;
-	int fault;
-#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE)
-	int is_write = error_code & ESR_DST;
-#else
-	int is_write = 0;
-
-	/*
-	 * Fortunately the bit assignments in SRR1 for an instruction
-	 * fault and DSISR for a data fault are mostly the same for the
-	 * bits we are interested in.  But there are some bits which
-	 * indicate errors in DSISR but can validly be set in SRR1.
-	 */
-	if (TRAP(regs) == 0x400)
-		error_code &= 0x48200000;
-	else
-		is_write = error_code & 0x02000000;
-#endif /* CONFIG_4xx || CONFIG_BOOKE */
-
-#if defined(CONFIG_XMON) || defined(CONFIG_KGDB)
-	if (debugger_fault_handler && TRAP(regs) == 0x300) {
-		debugger_fault_handler(regs);
-		return 0;
-	}
-#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE))
-	if (error_code & 0x00400000) {
-		/* DABR match */
-		if (debugger_dabr_match(regs))
-			return 0;
-	}
-#endif /* !(CONFIG_4xx || CONFIG_BOOKE)*/
-#endif /* CONFIG_XMON || CONFIG_KGDB */
-
-	if (in_atomic() || mm == NULL)
-		return SIGSEGV;
-
-	down_read(&mm->mmap_sem);
-	vma = find_vma(mm, address);
-	if (!vma)
-		goto bad_area;
-	if (vma->vm_start <= address)
-		goto good_area;
-	if (!(vma->vm_flags & VM_GROWSDOWN))
-		goto bad_area;
-	if (!is_write)
-                goto bad_area;
-
-	/*
-	 * N.B. The rs6000/xcoff ABI allows programs to access up to
-	 * a few hundred bytes below the stack pointer.
-	 * The kernel signal delivery code writes up to about 1.5kB
-	 * below the stack pointer (r1) before decrementing it.
-	 * The exec code can write slightly over 640kB to the stack
-	 * before setting the user r1.  Thus we allow the stack to
-	 * expand to 1MB without further checks.
-	 */
-	if (address + 0x100000 < vma->vm_end) {
-		/* get user regs even if this fault is in kernel mode */
-		struct pt_regs *uregs = current->thread.regs;
-		if (uregs == NULL)
-			goto bad_area;
-
-		/*
-		 * A user-mode access to an address a long way below
-		 * the stack pointer is only valid if the instruction
-		 * is one which would update the stack pointer to the
-		 * address accessed if the instruction completed,
-		 * i.e. either stwu rs,n(r1) or stwux rs,r1,rb
-		 * (or the byte, halfword, float or double forms).
-		 *
-		 * If we don't check this then any write to the area
-		 * between the last mapped region and the stack will
-		 * expand the stack rather than segfaulting.
-		 */
-		if (address + 2048 < uregs->gpr[1]
-		    && (!user_mode(regs) || !store_updates_sp(regs)))
-			goto bad_area;
-	}
-	if (expand_stack(vma, address))
-		goto bad_area;
-
-good_area:
-	code = SEGV_ACCERR;
-#if defined(CONFIG_6xx)
-	if (error_code & 0x95700000)
-		/* an error such as lwarx to I/O controller space,
-		   address matching DABR, eciwx, etc. */
-		goto bad_area;
-#endif /* CONFIG_6xx */
-#if defined(CONFIG_8xx)
-        /* The MPC8xx seems to always set 0x80000000, which is
-         * "undefined".  Of those that can be set, this is the only
-         * one which seems bad.
-         */
-	if (error_code & 0x10000000)
-                /* Guarded storage error. */
-		goto bad_area;
-#endif /* CONFIG_8xx */
-
-	/* a write */
-	if (is_write) {
-		if (!(vma->vm_flags & VM_WRITE))
-			goto bad_area;
-#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
-	/* an exec  - 4xx/Book-E allows for per-page execute permission */
-	} else if (TRAP(regs) == 0x400) {
-		pte_t *ptep;
-		pmd_t *pmdp;
-
-#if 0
-		/* It would be nice to actually enforce the VM execute
-		   permission on CPUs which can do so, but far too
-		   much stuff in userspace doesn't get the permissions
-		   right, so we let any page be executed for now. */
-		if (! (vma->vm_flags & VM_EXEC))
-			goto bad_area;
-#endif
-
-		/* Since 4xx/Book-E supports per-page execute permission,
-		 * we lazily flush dcache to icache. */
-		ptep = NULL;
-		if (get_pteptr(mm, address, &ptep, &pmdp)) {
-			spinlock_t *ptl = pte_lockptr(mm, pmdp);
-			spin_lock(ptl);
-			if (pte_present(*ptep)) {
-				struct page *page = pte_page(*ptep);
-
-				if (!test_bit(PG_arch_1, &page->flags)) {
-					flush_dcache_icache_page(page);
-					set_bit(PG_arch_1, &page->flags);
-				}
-				pte_update(ptep, 0, _PAGE_HWEXEC);
-				_tlbie(address, mm->context.id);
-				pte_unmap_unlock(ptep, ptl);
-				up_read(&mm->mmap_sem);
-				return 0;
-			}
-			pte_unmap_unlock(ptep, ptl);
-		}
-#endif
-	/* a read */
-	} else {
-		/* protection fault */
-		if (error_code & 0x08000000)
-			goto bad_area;
-		if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
-			goto bad_area;
-	}
-
-	/*
-	 * If for any reason at all we couldn't handle the fault,
-	 * make sure we exit gracefully rather than endlessly redo
-	 * the fault.
-	 */
- survive:
-	fault = handle_mm_fault(mm, vma, address, is_write);
-	if (unlikely(fault & VM_FAULT_ERROR)) {
-		if (fault & VM_FAULT_OOM)
-			goto out_of_memory;
-		else if (fault & VM_FAULT_SIGBUS)
-			goto do_sigbus;
-		BUG();
-	}
-	if (fault & VM_FAULT_MAJOR)
-		current->maj_flt++;
-	else
-		current->min_flt++;
-
-	up_read(&mm->mmap_sem);
-	/*
-	 * keep track of tlb+htab misses that are good addrs but
-	 * just need pte's created via handle_mm_fault()
-	 * -- Cort
-	 */
-	pte_misses++;
-	return 0;
-
-bad_area:
-	up_read(&mm->mmap_sem);
-	pte_errors++;
-
-	/* User mode accesses cause a SIGSEGV */
-	if (user_mode(regs)) {
-		_exception(SIGSEGV, regs, code, address);
-		return 0;
-	}
-
-	return SIGSEGV;
-
-/*
- * We ran out of memory, or some other thing happened to us that made
- * us unable to handle the page fault gracefully.
- */
-out_of_memory:
-	up_read(&mm->mmap_sem);
-	if (is_global_init(current)) {
-		yield();
-		down_read(&mm->mmap_sem);
-		goto survive;
-	}
-	printk("VM: killing process %s\n", current->comm);
-	if (user_mode(regs))
-		do_group_exit(SIGKILL);
-	return SIGKILL;
-
-do_sigbus:
-	up_read(&mm->mmap_sem);
-	info.si_signo = SIGBUS;
-	info.si_errno = 0;
-	info.si_code = BUS_ADRERR;
-	info.si_addr = (void __user *)address;
-	force_sig_info (SIGBUS, &info, current);
-	if (!user_mode(regs))
-		return SIGBUS;
-	return 0;
-}
-
-/*
- * bad_page_fault is called when we have a bad access from the kernel.
- * It is called from the DSI and ISI handlers in head.S and from some
- * of the procedures in traps.c.
- */
-void
-bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
-{
-	const struct exception_table_entry *entry;
-
-	/* Are we prepared to handle this fault?  */
-	if ((entry = search_exception_tables(regs->nip)) != NULL) {
-		regs->nip = entry->fixup;
-		return;
-	}
-
-	/* kernel has accessed a bad area */
-#if defined(CONFIG_XMON) || defined(CONFIG_KGDB)
-	if (debugger_kernel_faults)
-		debugger(regs);
-#endif
-	die("kernel access of bad area", regs, sig);
-}
-
-#ifdef CONFIG_8xx
-
-/* The pgtable.h claims some functions generically exist, but I
- * can't find them......
- */
-pte_t *va_to_pte(unsigned long address)
-{
-	pgd_t *dir;
-	pmd_t *pmd;
-	pte_t *pte;
-
-	if (address < TASK_SIZE)
-		return NULL;
-
-	dir = pgd_offset(&init_mm, address);
-	if (dir) {
-		pmd = pmd_offset(dir, address & PAGE_MASK);
-		if (pmd && pmd_present(*pmd)) {
-			pte = pte_offset_kernel(pmd, address & PAGE_MASK);
-			if (pte && pte_present(*pte))
-				return(pte);
-		}
-	}
-	return NULL;
-}
-
-unsigned long va_to_phys(unsigned long address)
-{
-	pte_t *pte;
-
-	pte = va_to_pte(address);
-	if (pte)
-		return(((unsigned long)(pte_val(*pte)) & PAGE_MASK) | (address & ~(PAGE_MASK)));
-	return (0);
-}
-
-void
-print_8xx_pte(struct mm_struct *mm, unsigned long addr)
-{
-        pgd_t * pgd;
-        pmd_t * pmd;
-        pte_t * pte;
-
-        printk(" pte @ 0x%8lx: ", addr);
-        pgd = pgd_offset(mm, addr & PAGE_MASK);
-        if (pgd) {
-                pmd = pmd_offset(pgd, addr & PAGE_MASK);
-                if (pmd && pmd_present(*pmd)) {
-                        pte = pte_offset_kernel(pmd, addr & PAGE_MASK);
-                        if (pte) {
-                                printk(" (0x%08lx)->(0x%08lx)->0x%08lx\n",
-                                        (long)pgd, (long)pte, (long)pte_val(*pte));
-#define pp ((long)pte_val(*pte))			
-				printk(" RPN: %05lx PP: %lx SPS: %lx SH: %lx "
-				       "CI: %lx v: %lx\n",
-				       pp>>12,    /* rpn */
-				       (pp>>10)&3, /* pp */
-				       (pp>>3)&1, /* small */
-				       (pp>>2)&1, /* shared */
-				       (pp>>1)&1, /* cache inhibit */
-				       pp&1       /* valid */
-				       );
-#undef pp			
-                        }
-                        else {
-                                printk("no pte\n");
-                        }
-                }
-                else {
-                        printk("no pmd\n");
-                }
-        }
-        else {
-                printk("no pgd\n");
-        }
-}
-
-int
-get_8xx_pte(struct mm_struct *mm, unsigned long addr)
-{
-        pgd_t * pgd;
-        pmd_t * pmd;
-        pte_t * pte;
-        int     retval = 0;
-
-        pgd = pgd_offset(mm, addr & PAGE_MASK);
-        if (pgd) {
-                pmd = pmd_offset(pgd, addr & PAGE_MASK);
-                if (pmd && pmd_present(*pmd)) {
-                        pte = pte_offset_kernel(pmd, addr & PAGE_MASK);
-                        if (pte) {
-				retval = (int)pte_val(*pte);
-                        }
-                }
-        }
-        return(retval);
-}
-#endif /* CONFIG_8xx */
diff --git a/arch/ppc/mm/hashtable.S b/arch/ppc/mm/hashtable.S
deleted file mode 100644
index 5f364dc50154..000000000000
--- a/arch/ppc/mm/hashtable.S
+++ /dev/null
@@ -1,617 +0,0 @@
-/*
- *  $Id: hashtable.S,v 1.6 1999/10/08 01:56:15 paulus Exp $
- *
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *  Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
- *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
- *  Adapted for Power Macintosh by Paul Mackerras.
- *  Low-level exception handlers and MMU support
- *  rewritten by Paul Mackerras.
- *    Copyright (C) 1996 Paul Mackerras.
- *
- *  This file contains low-level assembler routines for managing
- *  the PowerPC MMU hash table.  (PPC 8xx processors don't use a
- *  hash table, so this file is not used on them.)
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/cputable.h>
-#include <asm/ppc_asm.h>
-#include <asm/thread_info.h>
-#include <asm/asm-offsets.h>
-
-#ifdef CONFIG_SMP
-	.section .bss
-	.align	2
-	.globl mmu_hash_lock
-mmu_hash_lock:
-	.space	4
-#endif /* CONFIG_SMP */
-
-/*
- * Sync CPUs with hash_page taking & releasing the hash
- * table lock
- */
-#ifdef CONFIG_SMP
-	.text
-_GLOBAL(hash_page_sync)
-	lis	r8,mmu_hash_lock@h
-	ori	r8,r8,mmu_hash_lock@l
-	lis	r0,0x0fff
-	b	10f
-11:	lwz	r6,0(r8)
-	cmpwi	0,r6,0
-	bne	11b
-10:	lwarx	r6,0,r8
-	cmpwi	0,r6,0
-	bne-	11b
-	stwcx.	r0,0,r8
-	bne-	10b
-	isync
-	eieio
-	li	r0,0
-	stw	r0,0(r8)
-	blr	
-#endif
-
-/*
- * Load a PTE into the hash table, if possible.
- * The address is in r4, and r3 contains an access flag:
- * _PAGE_RW (0x400) if a write.
- * r9 contains the SRR1 value, from which we use the MSR_PR bit.
- * SPRG3 contains the physical address of the current task's thread.
- *
- * Returns to the caller if the access is illegal or there is no
- * mapping for the address.  Otherwise it places an appropriate PTE
- * in the hash table and returns from the exception.
- * Uses r0, r3 - r8, ctr, lr.
- */
-	.text
-_GLOBAL(hash_page)
-	tophys(r7,0)			/* gets -KERNELBASE into r7 */
-#ifdef CONFIG_SMP
-	addis	r8,r7,mmu_hash_lock@h
-	ori	r8,r8,mmu_hash_lock@l
-	lis	r0,0x0fff
-	b	10f
-11:	lwz	r6,0(r8)
-	cmpwi	0,r6,0
-	bne	11b
-10:	lwarx	r6,0,r8
-	cmpwi	0,r6,0
-	bne-	11b
-	stwcx.	r0,0,r8
-	bne-	10b
-	isync
-#endif
-	/* Get PTE (linux-style) and check access */
-	lis	r0,KERNELBASE@h		/* check if kernel address */
-	cmplw	0,r4,r0
-	mfspr	r8,SPRN_SPRG3		/* current task's THREAD (phys) */
-	ori	r3,r3,_PAGE_USER|_PAGE_PRESENT /* test low addresses as user */
-	lwz	r5,PGDIR(r8)		/* virt page-table root */
-	blt+	112f			/* assume user more likely */
-	lis	r5,swapper_pg_dir@ha	/* if kernel address, use */
-	addi	r5,r5,swapper_pg_dir@l	/* kernel page table */
-	rlwimi	r3,r9,32-12,29,29	/* MSR_PR -> _PAGE_USER */
-112:	add	r5,r5,r7		/* convert to phys addr */
-	rlwimi	r5,r4,12,20,29		/* insert top 10 bits of address */
-	lwz	r8,0(r5)		/* get pmd entry */
-	rlwinm.	r8,r8,0,0,19		/* extract address of pte page */
-#ifdef CONFIG_SMP
-	beq-	hash_page_out		/* return if no mapping */
-#else
-	/* XXX it seems like the 601 will give a machine fault on the
-	   rfi if its alignment is wrong (bottom 4 bits of address are
-	   8 or 0xc) and we have had a not-taken conditional branch
-	   to the address following the rfi. */
-	beqlr-
-#endif
-	rlwimi	r8,r4,22,20,29		/* insert next 10 bits of address */
-	rlwinm	r0,r3,32-3,24,24	/* _PAGE_RW access -> _PAGE_DIRTY */
-	ori	r0,r0,_PAGE_ACCESSED|_PAGE_HASHPTE
-
-	/*
-	 * Update the linux PTE atomically.  We do the lwarx up-front
-	 * because almost always, there won't be a permission violation
-	 * and there won't already be an HPTE, and thus we will have
-	 * to update the PTE to set _PAGE_HASHPTE.  -- paulus.
-	 */
-retry:
-	lwarx	r6,0,r8			/* get linux-style pte */
-	andc.	r5,r3,r6		/* check access & ~permission */
-#ifdef CONFIG_SMP
-	bne-	hash_page_out		/* return if access not permitted */
-#else
-	bnelr-
-#endif
-	or	r5,r0,r6		/* set accessed/dirty bits */
-	stwcx.	r5,0,r8			/* attempt to update PTE */
-	bne-	retry			/* retry if someone got there first */
-
-	mfsrin	r3,r4			/* get segment reg for segment */
-	mfctr	r0
-	stw	r0,_CTR(r11)
-	bl	create_hpte		/* add the hash table entry */
-
-/*
- * htab_reloads counts the number of times we have to fault an
- * HPTE into the hash table.  This should only happen after a
- * fork (because fork does a flush_tlb_mm) or a vmalloc or ioremap.
- * Where a page is faulted into a process's address space,
- * update_mmu_cache gets called to put the HPTE into the hash table
- * and those are counted as preloads rather than reloads.
- */
-	addis	r8,r7,htab_reloads@ha
-	lwz	r3,htab_reloads@l(r8)
-	addi	r3,r3,1
-	stw	r3,htab_reloads@l(r8)
-
-#ifdef CONFIG_SMP
-	eieio
-	addis	r8,r7,mmu_hash_lock@ha
-	li	r0,0
-	stw	r0,mmu_hash_lock@l(r8)
-#endif
-
-	/* Return from the exception */
-	lwz	r5,_CTR(r11)
-	mtctr	r5
-	lwz	r0,GPR0(r11)
-	lwz	r7,GPR7(r11)
-	lwz	r8,GPR8(r11)
-	b	fast_exception_return
-
-#ifdef CONFIG_SMP
-hash_page_out:
-	eieio
-	addis	r8,r7,mmu_hash_lock@ha
-	li	r0,0
-	stw	r0,mmu_hash_lock@l(r8)
-	blr
-#endif /* CONFIG_SMP */
-
-/*
- * Add an entry for a particular page to the hash table.
- *
- * add_hash_page(unsigned context, unsigned long va, unsigned long pmdval)
- *
- * We assume any necessary modifications to the pte (e.g. setting
- * the accessed bit) have already been done and that there is actually
- * a hash table in use (i.e. we're not on a 603).
- */
-_GLOBAL(add_hash_page)
-	mflr	r0
-	stw	r0,4(r1)
-
-	/* Convert context and va to VSID */
-	mulli	r3,r3,897*16		/* multiply context by context skew */
-	rlwinm	r0,r4,4,28,31		/* get ESID (top 4 bits of va) */
-	mulli	r0,r0,0x111		/* multiply by ESID skew */
-	add	r3,r3,r0		/* note create_hpte trims to 24 bits */
-
-#ifdef CONFIG_SMP
-	rlwinm	r8,r1,0,0,18		/* use cpu number to make tag */
-	lwz	r8,TI_CPU(r8)		/* to go in mmu_hash_lock */
-	oris	r8,r8,12
-#endif /* CONFIG_SMP */
-
-	/*
-	 * We disable interrupts here, even on UP, because we don't
-	 * want to race with hash_page, and because we want the
-	 * _PAGE_HASHPTE bit to be a reliable indication of whether
-	 * the HPTE exists (or at least whether one did once).
-	 * We also turn off the MMU for data accesses so that we
-	 * we can't take a hash table miss (assuming the code is
-	 * covered by a BAT).  -- paulus
-	 */
-	mfmsr	r10
-	SYNC
-	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
-	rlwinm	r0,r0,0,28,26		/* clear MSR_DR */
-	mtmsr	r0
-	SYNC_601
-	isync
-
-	tophys(r7,0)
-
-#ifdef CONFIG_SMP
-	addis	r9,r7,mmu_hash_lock@ha
-	addi	r9,r9,mmu_hash_lock@l
-10:	lwarx	r0,0,r9			/* take the mmu_hash_lock */
-	cmpi	0,r0,0
-	bne-	11f
-	stwcx.	r8,0,r9
-	beq+	12f
-11:	lwz	r0,0(r9)
-	cmpi	0,r0,0
-	beq	10b
-	b	11b
-12:	isync
-#endif
-
-	/*
-	 * Fetch the linux pte and test and set _PAGE_HASHPTE atomically.
-	 * If _PAGE_HASHPTE was already set, we don't replace the existing
-	 * HPTE, so we just unlock and return.
-	 */
-	mr	r8,r5
-	rlwimi	r8,r4,22,20,29
-1:	lwarx	r6,0,r8
-	andi.	r0,r6,_PAGE_HASHPTE
-	bne	9f			/* if HASHPTE already set, done */
-	ori	r5,r6,_PAGE_HASHPTE
-	stwcx.	r5,0,r8
-	bne-	1b
-
-	bl	create_hpte
-
-	addis	r8,r7,htab_preloads@ha
-	lwz	r3,htab_preloads@l(r8)
-	addi	r3,r3,1
-	stw	r3,htab_preloads@l(r8)
-
-9:
-#ifdef CONFIG_SMP
-	eieio
-	li	r0,0
-	stw	r0,0(r9)		/* clear mmu_hash_lock */
-#endif
-
-	/* reenable interrupts and DR */
-	mtmsr	r10
-	SYNC_601
-	isync
-
-	lwz	r0,4(r1)
-	mtlr	r0
-	blr
-
-/*
- * This routine adds a hardware PTE to the hash table.
- * It is designed to be called with the MMU either on or off.
- * r3 contains the VSID, r4 contains the virtual address,
- * r5 contains the linux PTE, r6 contains the old value of the
- * linux PTE (before setting _PAGE_HASHPTE) and r7 contains the
- * offset to be added to addresses (0 if the MMU is on,
- * -KERNELBASE if it is off).
- * On SMP, the caller should have the mmu_hash_lock held.
- * We assume that the caller has (or will) set the _PAGE_HASHPTE
- * bit in the linux PTE in memory.  The value passed in r6 should
- * be the old linux PTE value; if it doesn't have _PAGE_HASHPTE set
- * this routine will skip the search for an existing HPTE.
- * This procedure modifies r0, r3 - r6, r8, cr0.
- *  -- paulus.
- *
- * For speed, 4 of the instructions get patched once the size and
- * physical address of the hash table are known.  These definitions
- * of Hash_base and Hash_bits below are just an example.
- */
-Hash_base = 0xc0180000
-Hash_bits = 12				/* e.g. 256kB hash table */
-Hash_msk = (((1 << Hash_bits) - 1) * 64)
-
-/* defines for the PTE format for 32-bit PPCs */
-#define PTE_SIZE	8
-#define PTEG_SIZE	64
-#define LG_PTEG_SIZE	6
-#define LDPTEu		lwzu
-#define STPTE		stw
-#define CMPPTE		cmpw
-#define PTE_H		0x40
-#define PTE_V		0x80000000
-#define TST_V(r)	rlwinm. r,r,0,0,0
-#define SET_V(r)	oris r,r,PTE_V@h
-#define CLR_V(r,t)	rlwinm r,r,0,1,31
-
-#define HASH_LEFT	31-(LG_PTEG_SIZE+Hash_bits-1)
-#define HASH_RIGHT	31-LG_PTEG_SIZE
-
-_GLOBAL(create_hpte)
-	/* Convert linux-style PTE (r5) to low word of PPC-style PTE (r8) */
-	rlwinm	r8,r5,32-10,31,31	/* _PAGE_RW -> PP lsb */
-	rlwinm	r0,r5,32-7,31,31	/* _PAGE_DIRTY -> PP lsb */
-	and	r8,r8,r0		/* writable if _RW & _DIRTY */
-	rlwimi	r5,r5,32-1,30,30	/* _PAGE_USER -> PP msb */
-	rlwimi	r5,r5,32-2,31,31	/* _PAGE_USER -> PP lsb */
-	ori	r8,r8,0xe14		/* clear out reserved bits and M */
-	andc	r8,r5,r8		/* PP = user? (rw&dirty? 2: 3): 0 */
-BEGIN_FTR_SECTION
-	ori	r8,r8,_PAGE_COHERENT	/* set M (coherence required) */
-END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT)
-
-	/* Construct the high word of the PPC-style PTE (r5) */
-	rlwinm	r5,r3,7,1,24		/* put VSID in 0x7fffff80 bits */
-	rlwimi	r5,r4,10,26,31		/* put in API (abbrev page index) */
-	SET_V(r5)			/* set V (valid) bit */
-
-	/* Get the address of the primary PTE group in the hash table (r3) */
-_GLOBAL(hash_page_patch_A)
-	addis	r0,r7,Hash_base@h	/* base address of hash table */
-	rlwimi	r0,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT    /* VSID -> hash */
-	rlwinm	r3,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
-	xor	r3,r3,r0		/* make primary hash */
-	li	r0,8			/* PTEs/group */
-
-	/*
-	 * Test the _PAGE_HASHPTE bit in the old linux PTE, and skip the search
-	 * if it is clear, meaning that the HPTE isn't there already...
-	 */
-	andi.	r6,r6,_PAGE_HASHPTE
-	beq+	10f			/* no PTE: go look for an empty slot */
-	tlbie	r4
-
-	addis	r4,r7,htab_hash_searches@ha
-	lwz	r6,htab_hash_searches@l(r4)
-	addi	r6,r6,1			/* count how many searches we do */
-	stw	r6,htab_hash_searches@l(r4)
-
-	/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
-	mtctr	r0
-	addi	r4,r3,-PTE_SIZE
-1:	LDPTEu	r6,PTE_SIZE(r4)		/* get next PTE */
-	CMPPTE	0,r6,r5
-	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
-	beq+	found_slot
-
-	/* Search the secondary PTEG for a matching PTE */
-	ori	r5,r5,PTE_H		/* set H (secondary hash) bit */
-_GLOBAL(hash_page_patch_B)
-	xoris	r4,r3,Hash_msk>>16	/* compute secondary hash */
-	xori	r4,r4,(-PTEG_SIZE & 0xffff)
-	addi	r4,r4,-PTE_SIZE
-	mtctr	r0
-2:	LDPTEu	r6,PTE_SIZE(r4)
-	CMPPTE	0,r6,r5
-	bdnzf	2,2b
-	beq+	found_slot
-	xori	r5,r5,PTE_H		/* clear H bit again */
-
-	/* Search the primary PTEG for an empty slot */
-10:	mtctr	r0
-	addi	r4,r3,-PTE_SIZE		/* search primary PTEG */
-1:	LDPTEu	r6,PTE_SIZE(r4)		/* get next PTE */
-	TST_V(r6)			/* test valid bit */
-	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
-	beq+	found_empty
-
-	/* update counter of times that the primary PTEG is full */
-	addis	r4,r7,primary_pteg_full@ha
-	lwz	r6,primary_pteg_full@l(r4)
-	addi	r6,r6,1
-	stw	r6,primary_pteg_full@l(r4)
-
-	/* Search the secondary PTEG for an empty slot */
-	ori	r5,r5,PTE_H		/* set H (secondary hash) bit */
-_GLOBAL(hash_page_patch_C)
-	xoris	r4,r3,Hash_msk>>16	/* compute secondary hash */
-	xori	r4,r4,(-PTEG_SIZE & 0xffff)
-	addi	r4,r4,-PTE_SIZE
-	mtctr	r0
-2:	LDPTEu	r6,PTE_SIZE(r4)
-	TST_V(r6)
-	bdnzf	2,2b
-	beq+	found_empty
-	xori	r5,r5,PTE_H		/* clear H bit again */
-
-	/*
-	 * Choose an arbitrary slot in the primary PTEG to overwrite.
-	 * Since both the primary and secondary PTEGs are full, and we
-	 * have no information that the PTEs in the primary PTEG are
-	 * more important or useful than those in the secondary PTEG,
-	 * and we know there is a definite (although small) speed
-	 * advantage to putting the PTE in the primary PTEG, we always
-	 * put the PTE in the primary PTEG.
-	 */
-	addis	r4,r7,next_slot@ha
-	lwz	r6,next_slot@l(r4)
-	addi	r6,r6,PTE_SIZE
-	andi.	r6,r6,7*PTE_SIZE
-	stw	r6,next_slot@l(r4)
-	add	r4,r3,r6
-
-	/* update counter of evicted pages */
-	addis	r6,r7,htab_evicts@ha
-	lwz	r3,htab_evicts@l(r6)
-	addi	r3,r3,1
-	stw	r3,htab_evicts@l(r6)
-
-#ifndef CONFIG_SMP
-	/* Store PTE in PTEG */
-found_empty:
-	STPTE	r5,0(r4)
-found_slot:
-	STPTE	r8,PTE_SIZE/2(r4)
-
-#else /* CONFIG_SMP */
-/*
- * Between the tlbie above and updating the hash table entry below,
- * another CPU could read the hash table entry and put it in its TLB.
- * There are 3 cases:
- * 1. using an empty slot
- * 2. updating an earlier entry to change permissions (i.e. enable write)
- * 3. taking over the PTE for an unrelated address
- *
- * In each case it doesn't really matter if the other CPUs have the old
- * PTE in their TLB.  So we don't need to bother with another tlbie here,
- * which is convenient as we've overwritten the register that had the
- * address. :-)  The tlbie above is mainly to make sure that this CPU comes
- * and gets the new PTE from the hash table.
- *
- * We do however have to make sure that the PTE is never in an invalid
- * state with the V bit set.
- */
-found_empty:
-found_slot:
-	CLR_V(r5,r0)		/* clear V (valid) bit in PTE */
-	STPTE	r5,0(r4)
-	sync
-	TLBSYNC
-	STPTE	r8,PTE_SIZE/2(r4) /* put in correct RPN, WIMG, PP bits */
-	sync
-	SET_V(r5)
-	STPTE	r5,0(r4)	/* finally set V bit in PTE */
-#endif /* CONFIG_SMP */
-
-	sync		/* make sure pte updates get to memory */
-	blr
-
-	.section .bss
-	.align	2
-next_slot:
-	.space	4
-	.globl primary_pteg_full
-primary_pteg_full:
-	.space	4
-	.globl htab_hash_searches
-htab_hash_searches:
-	.space	4
-	.previous
-
-/*
- * Flush the entry for a particular page from the hash table.
- *
- * flush_hash_pages(unsigned context, unsigned long va, unsigned long pmdval,
- *		    int count)
- *
- * We assume that there is a hash table in use (Hash != 0).
- */
-_GLOBAL(flush_hash_pages)
-	tophys(r7,0)
-
-	/*
-	 * We disable interrupts here, even on UP, because we want
-	 * the _PAGE_HASHPTE bit to be a reliable indication of
-	 * whether the HPTE exists (or at least whether one did once).
-	 * We also turn off the MMU for data accesses so that we
-	 * we can't take a hash table miss (assuming the code is
-	 * covered by a BAT).  -- paulus
-	 */
-	mfmsr	r10
-	SYNC
-	rlwinm	r0,r10,0,17,15		/* clear bit 16 (MSR_EE) */
-	rlwinm	r0,r0,0,28,26		/* clear MSR_DR */
-	mtmsr	r0
-	SYNC_601
-	isync
-
-	/* First find a PTE in the range that has _PAGE_HASHPTE set */
-	rlwimi	r5,r4,22,20,29
-1:	lwz	r0,0(r5)
-	cmpwi	cr1,r6,1
-	andi.	r0,r0,_PAGE_HASHPTE
-	bne	2f
-	ble	cr1,19f
-	addi	r4,r4,0x1000
-	addi	r5,r5,4
-	addi	r6,r6,-1
-	b	1b
-
-	/* Convert context and va to VSID */
-2:	mulli	r3,r3,897*16		/* multiply context by context skew */
-	rlwinm	r0,r4,4,28,31		/* get ESID (top 4 bits of va) */
-	mulli	r0,r0,0x111		/* multiply by ESID skew */
-	add	r3,r3,r0		/* note code below trims to 24 bits */
-
-	/* Construct the high word of the PPC-style PTE (r11) */
-	rlwinm	r11,r3,7,1,24		/* put VSID in 0x7fffff80 bits */
-	rlwimi	r11,r4,10,26,31		/* put in API (abbrev page index) */
-	SET_V(r11)			/* set V (valid) bit */
-
-#ifdef CONFIG_SMP
-	addis	r9,r7,mmu_hash_lock@ha
-	addi	r9,r9,mmu_hash_lock@l
-	rlwinm	r8,r1,0,0,18
-	add	r8,r8,r7
-	lwz	r8,TI_CPU(r8)
-	oris	r8,r8,9
-10:	lwarx	r0,0,r9
-	cmpi	0,r0,0
-	bne-	11f
-	stwcx.	r8,0,r9
-	beq+	12f
-11:	lwz	r0,0(r9)
-	cmpi	0,r0,0
-	beq	10b
-	b	11b
-12:	isync
-#endif
-
-	/*
-	 * Check the _PAGE_HASHPTE bit in the linux PTE.  If it is
-	 * already clear, we're done (for this pte).  If not,
-	 * clear it (atomically) and proceed.  -- paulus.
-	 */
-33:	lwarx	r8,0,r5			/* fetch the pte */
-	andi.	r0,r8,_PAGE_HASHPTE
-	beq	8f			/* done if HASHPTE is already clear */
-	rlwinm	r8,r8,0,31,29		/* clear HASHPTE bit */
-	stwcx.	r8,0,r5			/* update the pte */
-	bne-	33b
-
-	/* Get the address of the primary PTE group in the hash table (r3) */
-_GLOBAL(flush_hash_patch_A)
-	addis	r8,r7,Hash_base@h	/* base address of hash table */
-	rlwimi	r8,r3,LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT    /* VSID -> hash */
-	rlwinm	r0,r4,20+LG_PTEG_SIZE,HASH_LEFT,HASH_RIGHT /* PI -> hash */
-	xor	r8,r0,r8		/* make primary hash */
-
-	/* Search the primary PTEG for a PTE whose 1st (d)word matches r5 */
-	li	r0,8			/* PTEs/group */
-	mtctr	r0
-	addi	r12,r8,-PTE_SIZE
-1:	LDPTEu	r0,PTE_SIZE(r12)	/* get next PTE */
-	CMPPTE	0,r0,r11
-	bdnzf	2,1b			/* loop while ctr != 0 && !cr0.eq */
-	beq+	3f
-
-	/* Search the secondary PTEG for a matching PTE */
-	ori	r11,r11,PTE_H		/* set H (secondary hash) bit */
-	li	r0,8			/* PTEs/group */
-_GLOBAL(flush_hash_patch_B)
-	xoris	r12,r8,Hash_msk>>16	/* compute secondary hash */
-	xori	r12,r12,(-PTEG_SIZE & 0xffff)
-	addi	r12,r12,-PTE_SIZE
-	mtctr	r0
-2:	LDPTEu	r0,PTE_SIZE(r12)
-	CMPPTE	0,r0,r11
-	bdnzf	2,2b
-	xori	r11,r11,PTE_H		/* clear H again */
-	bne-	4f			/* should rarely fail to find it */
-
-3:	li	r0,0
-	STPTE	r0,0(r12)		/* invalidate entry */
-4:	sync
-	tlbie	r4			/* in hw tlb too */
-	sync
-
-8:	ble	cr1,9f			/* if all ptes checked */
-81:	addi	r6,r6,-1
-	addi	r5,r5,4			/* advance to next pte */
-	addi	r4,r4,0x1000
-	lwz	r0,0(r5)		/* check next pte */
-	cmpwi	cr1,r6,1
-	andi.	r0,r0,_PAGE_HASHPTE
-	bne	33b
-	bgt	cr1,81b
-
-9:
-#ifdef CONFIG_SMP
-	TLBSYNC
-	li	r0,0
-	stw	r0,0(r9)		/* clear mmu_hash_lock */
-#endif
-
-19:	mtmsr	r10
-	SYNC_601
-	isync
-	blr
diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c
deleted file mode 100644
index 1a63711081b5..000000000000
--- a/arch/ppc/mm/init.c
+++ /dev/null
@@ -1,603 +0,0 @@
-/*
- *  PowerPC version
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *  PPC44x/36-bit changes by Matt Porter (mporter@mvista.com)
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/highmem.h>
-#include <linux/initrd.h>
-#include <linux/pagemap.h>
-
-#include <asm/pgalloc.h>
-#include <asm/prom.h>
-#include <asm/io.h>
-#include <asm/mmu_context.h>
-#include <asm/pgtable.h>
-#include <asm/mmu.h>
-#include <asm/smp.h>
-#include <asm/machdep.h>
-#include <asm/btext.h>
-#include <asm/tlb.h>
-#include <asm/bootinfo.h>
-
-#include "mem_pieces.h"
-#include "mmu_decl.h"
-
-#if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
-/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */
-#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - KERNELBASE))
-#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
-#endif
-#endif
-#define MAX_LOW_MEM	CONFIG_LOWMEM_SIZE
-
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
-unsigned long total_memory;
-unsigned long total_lowmem;
-
-unsigned long ppc_memstart;
-unsigned long ppc_memoffset = PAGE_OFFSET;
-
-int mem_init_done;
-int init_bootmem_done;
-int boot_mapsize;
-
-extern char _end[];
-extern char etext[], _stext[];
-extern char __init_begin, __init_end;
-
-#ifdef CONFIG_HIGHMEM
-pte_t *kmap_pte;
-pgprot_t kmap_prot;
-
-EXPORT_SYMBOL(kmap_prot);
-EXPORT_SYMBOL(kmap_pte);
-#endif
-
-void MMU_init(void);
-void set_phys_avail(unsigned long total_ram);
-
-/* XXX should be in current.h  -- paulus */
-extern struct task_struct *current_set[NR_CPUS];
-
-char *klimit = _end;
-struct mem_pieces phys_avail;
-
-/*
- * this tells the system to map all of ram with the segregs
- * (i.e. page tables) instead of the bats.
- * -- Cort
- */
-int __map_without_bats;
-int __map_without_ltlbs;
-
-/* max amount of RAM to use */
-unsigned long __max_memory;
-/* max amount of low RAM to map in */
-unsigned long __max_low_memory = MAX_LOW_MEM;
-
-void show_mem(void)
-{
-	int i,free = 0,total = 0,reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageHighMem(mem_map+i))
-			highmem++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map+i))
-			free++;
-		else
-			shared += page_count(mem_map+i) - 1;
-	}
-	printk("%d pages of RAM\n",total);
-	printk("%d pages of HIGHMEM\n", highmem);
-	printk("%d free pages\n",free);
-	printk("%d reserved pages\n",reserved);
-	printk("%d pages shared\n",shared);
-	printk("%d pages swap cached\n",cached);
-}
-
-/* Free up now-unused memory */
-static void free_sec(unsigned long start, unsigned long end, const char *name)
-{
-	unsigned long cnt = 0;
-
-	while (start < end) {
-		ClearPageReserved(virt_to_page(start));
-		init_page_count(virt_to_page(start));
-		free_page(start);
-		cnt++;
-		start += PAGE_SIZE;
- 	}
-	if (cnt) {
-		printk(" %ldk %s", cnt << (PAGE_SHIFT - 10), name);
-		totalram_pages += cnt;
-	}
-}
-
-void free_initmem(void)
-{
-#define FREESEC(TYPE) \
-	free_sec((unsigned long)(&__ ## TYPE ## _begin), \
-		 (unsigned long)(&__ ## TYPE ## _end), \
-		 #TYPE);
-
-	printk ("Freeing unused kernel memory:");
-	FREESEC(init);
- 	printk("\n");
-	ppc_md.progress = NULL;
-#undef FREESEC
-}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
-{
-	printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10);
-
-	for (; start < end; start += PAGE_SIZE) {
-		ClearPageReserved(virt_to_page(start));
-		init_page_count(virt_to_page(start));
-		free_page(start);
-		totalram_pages++;
-	}
-}
-#endif
-
-/*
- * Check for command-line options that affect what MMU_init will do.
- */
-void MMU_setup(void)
-{
-	/* Check for nobats option (used in mapin_ram). */
-	if (strstr(cmd_line, "nobats")) {
-		__map_without_bats = 1;
-	}
-
-	if (strstr(cmd_line, "noltlbs")) {
-		__map_without_ltlbs = 1;
-	}
-
-	/* Look for mem= option on command line */
-	if (strstr(cmd_line, "mem=")) {
-		char *p, *q;
-		unsigned long maxmem = 0;
-
-		for (q = cmd_line; (p = strstr(q, "mem=")) != 0; ) {
-			q = p + 4;
-			if (p > cmd_line && p[-1] != ' ')
-				continue;
-			maxmem = simple_strtoul(q, &q, 0);
-			if (*q == 'k' || *q == 'K') {
-				maxmem <<= 10;
-				++q;
-			} else if (*q == 'm' || *q == 'M') {
-				maxmem <<= 20;
-				++q;
-			}
-		}
-		__max_memory = maxmem;
-	}
-}
-
-/*
- * MMU_init sets up the basic memory mappings for the kernel,
- * including both RAM and possibly some I/O regions,
- * and sets up the page tables and the MMU hardware ready to go.
- */
-void __init MMU_init(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:enter", 0x111);
-
-	/* parse args from command line */
-	MMU_setup();
-
-	/*
-	 * Figure out how much memory we have, how much
-	 * is lowmem, and how much is highmem.  If we were
-	 * passed the total memory size from the bootloader,
-	 * just use it.
-	 */
-	if (boot_mem_size)
-		total_memory = boot_mem_size;
-	else
-		total_memory = ppc_md.find_end_of_memory();
-
-	if (__max_memory && total_memory > __max_memory)
-		total_memory = __max_memory;
-	total_lowmem = total_memory;
-	if (total_lowmem > __max_low_memory) {
-		total_lowmem = __max_low_memory;
-#ifndef CONFIG_HIGHMEM
-		total_memory = total_lowmem;
-#endif /* CONFIG_HIGHMEM */
-	}
-	set_phys_avail(total_lowmem);
-
-	/* Initialize the MMU hardware */
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:hw init", 0x300);
-	MMU_init_hw();
-
-	/* Map in all of RAM starting at KERNELBASE */
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:mapin", 0x301);
-	mapin_ram();
-
-#ifdef CONFIG_HIGHMEM
-	ioremap_base = PKMAP_BASE;
-#else
-	ioremap_base = 0xfe000000UL;	/* for now, could be 0xfffff000 */
-#endif /* CONFIG_HIGHMEM */
-	ioremap_bot = ioremap_base;
-
-	/* Map in I/O resources */
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:setio", 0x302);
-	if (ppc_md.setup_io_mappings)
-		ppc_md.setup_io_mappings();
-
-	/* Initialize the context management stuff */
-	mmu_context_init();
-
-	if (ppc_md.progress)
-		ppc_md.progress("MMU:exit", 0x211);
-
-#ifdef CONFIG_BOOTX_TEXT
-	/* By default, we are no longer mapped */
-       	boot_text_mapped = 0;
-	/* Must be done last, or ppc_md.progress will die. */
-	map_boot_text();
-#endif
-}
-
-/* This is only called until mem_init is done. */
-void __init *early_get_page(void)
-{
-	void *p;
-
-	if (init_bootmem_done) {
-		p = alloc_bootmem_pages(PAGE_SIZE);
-	} else {
-		p = mem_pieces_find(PAGE_SIZE, PAGE_SIZE);
-	}
-	return p;
-}
-
-/*
- * Initialize the bootmem system and give it all the memory we
- * have available.
- */
-void __init do_init_bootmem(void)
-{
-	unsigned long start, size;
-	int i;
-
-	/*
-	 * Find an area to use for the bootmem bitmap.
-	 * We look for the first area which is at least
-	 * 128kB in length (128kB is enough for a bitmap
-	 * for 4GB of memory, using 4kB pages), plus 1 page
-	 * (in case the address isn't page-aligned).
-	 */
-	start = 0;
-	size = 0;
-	for (i = 0; i < phys_avail.n_regions; ++i) {
-		unsigned long a = phys_avail.regions[i].address;
-		unsigned long s = phys_avail.regions[i].size;
-		if (s <= size)
-			continue;
-		start = a;
-		size = s;
-		if (s >= 33 * PAGE_SIZE)
-			break;
-	}
-	start = PAGE_ALIGN(start);
-
-	min_low_pfn = start >> PAGE_SHIFT;
-	max_low_pfn = (PPC_MEMSTART + total_lowmem) >> PAGE_SHIFT;
-	max_pfn = (PPC_MEMSTART + total_memory) >> PAGE_SHIFT;
-	boot_mapsize = init_bootmem_node(&contig_page_data, min_low_pfn,
-					 PPC_MEMSTART >> PAGE_SHIFT,
-					 max_low_pfn);
-
-	/* remove the bootmem bitmap from the available memory */
-	mem_pieces_remove(&phys_avail, start, boot_mapsize, 1);
-
-	/* add everything in phys_avail into the bootmem map */
-	for (i = 0; i < phys_avail.n_regions; ++i)
-		free_bootmem(phys_avail.regions[i].address,
-			     phys_avail.regions[i].size);
-
-	init_bootmem_done = 1;
-}
-
-/*
- * paging_init() sets up the page tables - in fact we've already done this.
- */
-void __init paging_init(void)
-{
-	unsigned long start_pfn, end_pfn;
-	unsigned long max_zone_pfns[MAX_NR_ZONES];
-#ifdef CONFIG_HIGHMEM
-	map_page(PKMAP_BASE, 0, 0);	/* XXX gross */
-	pkmap_page_table = pte_offset_kernel(pmd_offset(pgd_offset_k
-			(PKMAP_BASE), PKMAP_BASE), PKMAP_BASE);
-	map_page(KMAP_FIX_BEGIN, 0, 0);	/* XXX gross */
-	kmap_pte = pte_offset_kernel(pmd_offset(pgd_offset_k
-			(KMAP_FIX_BEGIN), KMAP_FIX_BEGIN), KMAP_FIX_BEGIN);
-	kmap_prot = PAGE_KERNEL;
-#endif /* CONFIG_HIGHMEM */
-	/* All pages are DMA-able so we put them all in the DMA zone. */
-	start_pfn = __pa(PAGE_OFFSET) >> PAGE_SHIFT;
-	end_pfn = start_pfn + (total_memory >> PAGE_SHIFT);
-	add_active_range(0, start_pfn, end_pfn);
-
-	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-#ifdef CONFIG_HIGHMEM
-	max_zone_pfns[ZONE_DMA] = total_lowmem >> PAGE_SHIFT;
-	max_zone_pfns[ZONE_HIGHMEM] = total_memory >> PAGE_SHIFT;
-#else
-	max_zone_pfns[ZONE_DMA] = total_memory >> PAGE_SHIFT;
-#endif /* CONFIG_HIGHMEM */
-	free_area_init_nodes(max_zone_pfns);
-}
-
-void __init mem_init(void)
-{
-	unsigned long addr;
-	int codepages = 0;
-	int datapages = 0;
-	int initpages = 0;
-#ifdef CONFIG_HIGHMEM
-	unsigned long highmem_mapnr;
-
-	highmem_mapnr = total_lowmem >> PAGE_SHIFT;
-#endif /* CONFIG_HIGHMEM */
-	max_mapnr = total_memory >> PAGE_SHIFT;
-
-	high_memory = (void *) __va(PPC_MEMSTART + total_lowmem);
-	num_physpages = max_mapnr;	/* RAM is assumed contiguous */
-
-	totalram_pages += free_all_bootmem();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* if we are booted from BootX with an initial ramdisk,
-	   make sure the ramdisk pages aren't reserved. */
-	if (initrd_start) {
-		for (addr = initrd_start; addr < initrd_end; addr += PAGE_SIZE)
-			ClearPageReserved(virt_to_page(addr));
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	for (addr = PAGE_OFFSET; addr < (unsigned long)high_memory;
-	     addr += PAGE_SIZE) {
-		if (!PageReserved(virt_to_page(addr)))
-			continue;
-		if (addr < (ulong) etext)
-			codepages++;
-		else if (addr >= (unsigned long)&__init_begin
-			 && addr < (unsigned long)&__init_end)
-			initpages++;
-		else if (addr < (ulong) klimit)
-			datapages++;
-	}
-
-#ifdef CONFIG_HIGHMEM
-	{
-		unsigned long pfn;
-
-		for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
-			struct page *page = mem_map + pfn;
-
-			ClearPageReserved(page);
-			init_page_count(page);
-			__free_page(page);
-			totalhigh_pages++;
-		}
-		totalram_pages += totalhigh_pages;
-	}
-#endif /* CONFIG_HIGHMEM */
-
-        printk("Memory: %luk available (%dk kernel code, %dk data, %dk init, %ldk highmem)\n",
-	       (unsigned long)nr_free_pages()<< (PAGE_SHIFT-10),
-	       codepages<< (PAGE_SHIFT-10), datapages<< (PAGE_SHIFT-10),
-	       initpages<< (PAGE_SHIFT-10),
-	       (unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
-
-	mem_init_done = 1;
-}
-
-/*
- * Set phys_avail to the amount of physical memory,
- * less the kernel text/data/bss.
- */
-void __init
-set_phys_avail(unsigned long total_memory)
-{
-	unsigned long kstart, ksize;
-
-	/*
-	 * Initially, available physical memory is equivalent to all
-	 * physical memory.
-	 */
-
-	phys_avail.regions[0].address = PPC_MEMSTART;
-	phys_avail.regions[0].size = total_memory;
-	phys_avail.n_regions = 1;
-
-	/*
-	 * Map out the kernel text/data/bss from the available physical
-	 * memory.
-	 */
-
-	kstart = __pa(_stext);	/* should be 0 */
-	ksize = PAGE_ALIGN(klimit - _stext);
-
-	mem_pieces_remove(&phys_avail, kstart, ksize, 0);
-	mem_pieces_remove(&phys_avail, 0, 0x4000, 0);
-
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/* Remove the init RAM disk from the available memory. */
-	if (initrd_start) {
-		mem_pieces_remove(&phys_avail, __pa(initrd_start),
-				  initrd_end - initrd_start, 1);
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-}
-
-/* Mark some memory as reserved by removing it from phys_avail. */
-void __init reserve_phys_mem(unsigned long start, unsigned long size)
-{
-	mem_pieces_remove(&phys_avail, start, size, 1);
-}
-
-/*
- * This is called when a page has been modified by the kernel.
- * It just marks the page as not i-cache clean.  We do the i-cache
- * flush later when the page is given to a user process, if necessary.
- */
-void flush_dcache_page(struct page *page)
-{
-	clear_bit(PG_arch_1, &page->flags);
-}
-
-void flush_dcache_icache_page(struct page *page)
-{
-#ifdef CONFIG_BOOKE
-	void *start = kmap_atomic(page, KM_PPC_SYNC_ICACHE);
-	__flush_dcache_icache(start);
-	kunmap_atomic(start, KM_PPC_SYNC_ICACHE);
-#elif defined(CONFIG_8xx)
-	/* On 8xx there is no need to kmap since highmem is not supported */
-	__flush_dcache_icache(page_address(page)); 
-#else
-	__flush_dcache_icache_phys(page_to_pfn(page) << PAGE_SHIFT);
-#endif
-
-}
-void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
-{
-	clear_page(page);
-	clear_bit(PG_arch_1, &pg->flags);
-}
-
-void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-		    struct page *pg)
-{
-	copy_page(vto, vfrom);
-	clear_bit(PG_arch_1, &pg->flags);
-}
-
-void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
-			     unsigned long addr, int len)
-{
-	unsigned long maddr;
-
-	maddr = (unsigned long) kmap(page) + (addr & ~PAGE_MASK);
-	flush_icache_range(maddr, maddr + len);
-	kunmap(page);
-}
-
-/*
- * This is called at the end of handling a user page fault, when the
- * fault has been handled by updating a PTE in the linux page tables.
- * We use it to preload an HPTE into the hash table corresponding to
- * the updated linux PTE.
- */
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
-		      pte_t pte)
-{
-	/* handle i-cache coherency */
-	unsigned long pfn = pte_pfn(pte);
-
-	if (pfn_valid(pfn)) {
-		struct page *page = pfn_to_page(pfn);
-#ifdef CONFIG_8xx
-		/* On 8xx, the TLB handlers work in 2 stages:
-	 	 * First, a zeroed entry is loaded by TLBMiss handler,
-		 * which causes the TLBError handler to be triggered.
-		 * That means the zeroed TLB has to be invalidated
-		 * whenever a page miss occurs.
-		 */
-		_tlbie(address, 0 /* 8xx doesn't care about PID */);
-#endif
-		if (!PageReserved(page)
-		    && !test_bit(PG_arch_1, &page->flags)) {
-			if (vma->vm_mm == current->active_mm)
-				__flush_dcache_icache((void *) address);
-			else
-				flush_dcache_icache_page(page);
-			set_bit(PG_arch_1, &page->flags);
-		}
-	}
-
-#ifdef CONFIG_PPC_STD_MMU
-	/* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */
-	if (Hash != 0 && pte_young(pte)) {
-		struct mm_struct *mm;
-		pmd_t *pmd;
-
-		mm = (address < TASK_SIZE)? vma->vm_mm: &init_mm;
-		pmd = pmd_offset(pgd_offset(mm, address), address);
-		if (!pmd_none(*pmd))
-			add_hash_page(mm->context.id, address, pmd_val(*pmd));
-	}
-#endif
-}
-
-/*
- * This is called by /dev/mem to know if a given address has to
- * be mapped non-cacheable or not
- */
-int page_is_ram(unsigned long pfn)
-{
-	return pfn < max_pfn;
-}
-
-pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
-			      unsigned long size, pgprot_t vma_prot)
-{
-	if (ppc_md.phys_mem_access_prot)
-		return ppc_md.phys_mem_access_prot(file, pfn, size, vma_prot);
-
-	if (!page_is_ram(pfn))
-		vma_prot = __pgprot(pgprot_val(vma_prot)
-				    | _PAGE_GUARDED | _PAGE_NO_CACHE);
-	return vma_prot;
-}
-EXPORT_SYMBOL(phys_mem_access_prot);
diff --git a/arch/ppc/mm/mem_pieces.c b/arch/ppc/mm/mem_pieces.c
deleted file mode 100644
index 6030a0ddfbb4..000000000000
--- a/arch/ppc/mm/mem_pieces.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Changes to accommodate Power Macintoshes.
- *    Cort Dougan <cort@cs.nmt.edu>
- *      Rewrites.
- *    Grant Erickson <grant@lcse.umn.edu>
- *      General rework and split from mm/init.c.
- *
- *    Module name: mem_pieces.c
- *
- *    Description:
- *      Routines and data structures for manipulating and representing
- *      phyiscal memory extents (i.e. address/length pairs).
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <asm/page.h>
-
-#include "mem_pieces.h"
-
-extern struct mem_pieces phys_avail;
-
-static void mem_pieces_print(struct mem_pieces *);
-
-/*
- * Scan a region for a piece of a given size with the required alignment.
- */
-void __init *
-mem_pieces_find(unsigned int size, unsigned int align)
-{
-	int i;
-	unsigned a, e;
-	struct mem_pieces *mp = &phys_avail;
-
-	for (i = 0; i < mp->n_regions; ++i) {
-		a = mp->regions[i].address;
-		e = a + mp->regions[i].size;
-		a = (a + align - 1) & -align;
-		if (a + size <= e) {
-			mem_pieces_remove(mp, a, size, 1);
-			return (void *) __va(a);
-		}
-	}
-	panic("Couldn't find %u bytes at %u alignment\n", size, align);
-
-	return NULL;
-}
-
-/*
- * Remove some memory from an array of pieces
- */
-void __init
-mem_pieces_remove(struct mem_pieces *mp, unsigned int start, unsigned int size,
-		  int must_exist)
-{
-	int i, j;
-	unsigned int end, rs, re;
-	struct reg_property *rp;
-
-	end = start + size;
-	for (i = 0, rp = mp->regions; i < mp->n_regions; ++i, ++rp) {
-		if (end > rp->address && start < rp->address + rp->size)
-			break;
-	}
-	if (i >= mp->n_regions) {
-		if (must_exist)
-			printk("mem_pieces_remove: [%x,%x) not in any region\n",
-			       start, end);
-		return;
-	}
-	for (; i < mp->n_regions && end > rp->address; ++i, ++rp) {
-		rs = rp->address;
-		re = rs + rp->size;
-		if (must_exist && (start < rs || end > re)) {
-			printk("mem_pieces_remove: bad overlap [%x,%x) with",
-			       start, end);
-			mem_pieces_print(mp);
-			must_exist = 0;
-		}
-		if (start > rs) {
-			rp->size = start - rs;
-			if (end < re) {
-				/* need to split this entry */
-				if (mp->n_regions >= MEM_PIECES_MAX)
-					panic("eek... mem_pieces overflow");
-				for (j = mp->n_regions; j > i + 1; --j)
-					mp->regions[j] = mp->regions[j-1];
-				++mp->n_regions;
-				rp[1].address = end;
-				rp[1].size = re - end;
-			}
-		} else {
-			if (end < re) {
-				rp->address = end;
-				rp->size = re - end;
-			} else {
-				/* need to delete this entry */
-				for (j = i; j < mp->n_regions - 1; ++j)
-					mp->regions[j] = mp->regions[j+1];
-				--mp->n_regions;
-				--i;
-				--rp;
-			}
-		}
-	}
-}
-
-static void __init
-mem_pieces_print(struct mem_pieces *mp)
-{
-	int i;
-
-	for (i = 0; i < mp->n_regions; ++i)
-		printk(" [%x, %x)", mp->regions[i].address,
-		       mp->regions[i].address + mp->regions[i].size);
-	printk("\n");
-}
-
-void __init
-mem_pieces_sort(struct mem_pieces *mp)
-{
-	unsigned long a, s;
-	int i, j;
-
-	for (i = 1; i < mp->n_regions; ++i) {
-		a = mp->regions[i].address;
-		s = mp->regions[i].size;
-		for (j = i - 1; j >= 0; --j) {
-			if (a >= mp->regions[j].address)
-				break;
-			mp->regions[j+1] = mp->regions[j];
-		}
-		mp->regions[j+1].address = a;
-		mp->regions[j+1].size = s;
-	}
-}
-
-void __init
-mem_pieces_coalesce(struct mem_pieces *mp)
-{
-	unsigned long a, s, ns;
-	int i, j, d;
-
-	d = 0;
-	for (i = 0; i < mp->n_regions; i = j) {
-		a = mp->regions[i].address;
-		s = mp->regions[i].size;
-		for (j = i + 1; j < mp->n_regions
-			     && mp->regions[j].address - a <= s; ++j) {
-			ns = mp->regions[j].address + mp->regions[j].size - a;
-			if (ns > s)
-				s = ns;
-		}
-		mp->regions[d].address = a;
-		mp->regions[d].size = s;
-		++d;
-	}
-	mp->n_regions = d;
-}
diff --git a/arch/ppc/mm/mem_pieces.h b/arch/ppc/mm/mem_pieces.h
deleted file mode 100644
index e2b700dc7f18..000000000000
--- a/arch/ppc/mm/mem_pieces.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- *    Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
- *      Changes to accommodate Power Macintoshes.
- *    Cort Dougan <cort@cs.nmt.edu>
- *      Rewrites.
- *    Grant Erickson <grant@lcse.umn.edu>
- *      General rework and split from mm/init.c.
- *
- *    Module name: mem_pieces.h
- *
- *    Description:
- *      Routines and data structures for manipulating and representing
- *      phyiscal memory extents (i.e. address/length pairs).
- *
- */
-
-#ifndef __MEM_PIECES_H__
-#define	__MEM_PIECES_H__
-
-#include <asm/prom.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* Type Definitions */
-
-#define	MEM_PIECES_MAX	32
-
-struct mem_pieces {
-    int n_regions;
-    struct reg_property regions[MEM_PIECES_MAX];
-};
-
-/* Function Prototypes */
-
-extern void	*mem_pieces_find(unsigned int size, unsigned int align);
-extern void	 mem_pieces_remove(struct mem_pieces *mp, unsigned int start,
-				   unsigned int size, int must_exist);
-extern void	 mem_pieces_coalesce(struct mem_pieces *mp);
-extern void	 mem_pieces_sort(struct mem_pieces *mp);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __MEM_PIECES_H__ */
diff --git a/arch/ppc/mm/mmu_context.c b/arch/ppc/mm/mmu_context.c
deleted file mode 100644
index dacf45ced473..000000000000
--- a/arch/ppc/mm/mmu_context.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * This file contains the routines for handling the MMU on those
- * PowerPC implementations where the MMU substantially follows the
- * architecture specification.  This includes the 6xx, 7xx, 7xxx,
- * and 8260 implementations but excludes the 8xx and 4xx.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mmu_context.h>
-#include <asm/tlbflush.h>
-
-unsigned long next_mmu_context;
-unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
-#ifdef FEW_CONTEXTS
-atomic_t nr_free_contexts;
-struct mm_struct *context_mm[LAST_CONTEXT+1];
-void steal_context(void);
-#endif /* FEW_CONTEXTS */
-
-/*
- * Initialize the context management stuff.
- */
-void __init
-mmu_context_init(void)
-{
-	/*
-	 * Some processors have too few contexts to reserve one for
-	 * init_mm, and require using context 0 for a normal task.
-	 * Other processors reserve the use of context zero for the kernel.
-	 * This code assumes FIRST_CONTEXT < 32.
-	 */
-	context_map[0] = (1 << FIRST_CONTEXT) - 1;
-	next_mmu_context = FIRST_CONTEXT;
-#ifdef FEW_CONTEXTS
-	atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
-#endif /* FEW_CONTEXTS */
-}
-
-#ifdef FEW_CONTEXTS
-/*
- * Steal a context from a task that has one at the moment.
- * This is only used on 8xx and 4xx and we presently assume that
- * they don't do SMP.  If they do then this will have to check
- * whether the MM we steal is in use.
- * We also assume that this is only used on systems that don't
- * use an MMU hash table - this is true for 8xx and 4xx.
- * This isn't an LRU system, it just frees up each context in
- * turn (sort-of pseudo-random replacement :).  This would be the
- * place to implement an LRU scheme if anyone was motivated to do it.
- *  -- paulus
- */
-void
-steal_context(void)
-{
-	struct mm_struct *mm;
-
-	/* free up context `next_mmu_context' */
-	/* if we shouldn't free context 0, don't... */
-	if (next_mmu_context < FIRST_CONTEXT)
-		next_mmu_context = FIRST_CONTEXT;
-	mm = context_mm[next_mmu_context];
-	flush_tlb_mm(mm);
-	destroy_context(mm);
-}
-#endif /* FEW_CONTEXTS */
diff --git a/arch/ppc/mm/mmu_decl.h b/arch/ppc/mm/mmu_decl.h
deleted file mode 100644
index 5f813e386b87..000000000000
--- a/arch/ppc/mm/mmu_decl.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Declarations of procedures and variables shared between files
- * in arch/ppc/mm/.
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-#include <asm/tlbflush.h>
-#include <asm/mmu.h>
-
-extern void mapin_ram(void);
-extern int map_page(unsigned long va, phys_addr_t pa, int flags);
-extern void setbat(int index, unsigned long virt, unsigned long phys,
-		   unsigned int size, int flags);
-extern void reserve_phys_mem(unsigned long start, unsigned long size);
-extern void settlbcam(int index, unsigned long virt, phys_addr_t phys,
-		      unsigned int size, int flags, unsigned int pid);
-extern void invalidate_tlbcam_entry(int index);
-
-extern int __map_without_bats;
-extern unsigned long ioremap_base;
-extern unsigned long ioremap_bot;
-extern unsigned int rtas_data, rtas_size;
-
-extern unsigned long total_memory;
-extern unsigned long total_lowmem;
-extern int mem_init_done;
-
-extern PTE *Hash, *Hash_end;
-extern unsigned long Hash_size, Hash_mask;
-
-extern unsigned int num_tlbcam_entries;
-
-/* ...and now those things that may be slightly different between processor
- * architectures.  -- Dan
- */
-#if defined(CONFIG_8xx)
-#define flush_HPTE(X, va, pg)	_tlbie(va, 0 /* 8xx doesn't care about PID */)
-#define MMU_init_hw()		do { } while(0)
-#define mmu_mapin_ram()		(0UL)
-
-#elif defined(CONFIG_4xx)
-#define flush_HPTE(pid, va, pg)	_tlbie(va, pid)
-extern void MMU_init_hw(void);
-extern unsigned long mmu_mapin_ram(void);
-
-#else
-/* anything except 4xx or 8xx */
-extern void MMU_init_hw(void);
-extern unsigned long mmu_mapin_ram(void);
-
-/* Be careful....this needs to be updated if we ever encounter 603 SMPs,
- * which includes all new 82xx processors.  We need tlbie/tlbsync here
- * in that case (I think). -- Dan.
- */
-static inline void flush_HPTE(unsigned context, unsigned long va,
-			      unsigned long pdval)
-{
-	if ((Hash != 0) &&
-	    cpu_has_feature(CPU_FTR_HPTE_TABLE))
-		flush_hash_pages(0, va, pdval, 1);
-	else
-		_tlbie(va);
-}
-#endif
diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c
deleted file mode 100644
index 03a79bff1271..000000000000
--- a/arch/ppc/mm/pgtable.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- * This file contains the routines setting up the linux page tables.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/io.h>
-
-#include "mmu_decl.h"
-
-unsigned long ioremap_base;
-unsigned long ioremap_bot;
-int io_bat_index;
-
-#if defined(CONFIG_6xx)
-#define HAVE_BATS	1
-#endif
-
-extern char etext[], _stext[];
-
-#ifdef CONFIG_SMP
-extern void hash_page_sync(void);
-#endif
-
-#ifdef HAVE_BATS
-extern unsigned long v_mapped_by_bats(unsigned long va);
-extern unsigned long p_mapped_by_bats(unsigned long pa);
-void setbat(int index, unsigned long virt, unsigned long phys,
-	    unsigned int size, int flags);
-
-#else /* !HAVE_BATS */
-#define v_mapped_by_bats(x)	(0UL)
-#define p_mapped_by_bats(x)	(0UL)
-#endif /* HAVE_BATS */
-
-#ifdef CONFIG_PTE_64BIT
-/* 44x uses an 8kB pgdir because it has 8-byte Linux PTEs. */
-#define PGDIR_ORDER	1
-#else
-#define PGDIR_ORDER	0
-#endif
-
-pgd_t *pgd_alloc(struct mm_struct *mm)
-{
-	pgd_t *ret;
-
-	ret = (pgd_t *)__get_free_pages(GFP_KERNEL|__GFP_ZERO, PGDIR_ORDER);
-	return ret;
-}
-
-void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	free_pages((unsigned long)pgd, PGDIR_ORDER);
-}
-
-__init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
-{
-	pte_t *pte;
-	extern int mem_init_done;
-	extern void *early_get_page(void);
-
-	if (mem_init_done) {
-		pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
-	} else {
-		pte = (pte_t *)early_get_page();
-		if (pte)
-			clear_page(pte);
-	}
-	return pte;
-}
-
-pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
-{
-	struct page *ptepage;
-
-#ifdef CONFIG_HIGHPTE
-	gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
-#else
-	gfp_t flags = GFP_KERNEL | __GFP_REPEAT;
-#endif
-
-	ptepage = alloc_pages(flags, 0);
-	if (ptepage) {
-		clear_highpage(ptepage);
-		pgtable_page_ctor(ptepage);
-	}
-	return ptepage;
-}
-
-void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-#ifdef CONFIG_SMP
-	hash_page_sync();
-#endif
-	free_page((unsigned long)pte);
-}
-
-void pte_free(struct mm_struct *mm, pgtable_t ptepage)
-{
-#ifdef CONFIG_SMP
-	hash_page_sync();
-#endif
-	pgtable_page_dtor(ptepage);
-	__free_page(ptepage);
-}
-
-#ifndef CONFIG_PHYS_64BIT
-void __iomem *
-ioremap(phys_addr_t addr, unsigned long size)
-{
-	return __ioremap(addr, size, _PAGE_NO_CACHE);
-}
-#else /* CONFIG_PHYS_64BIT */
-void __iomem *
-ioremap64(unsigned long long addr, unsigned long size)
-{
-	return __ioremap(addr, size, _PAGE_NO_CACHE);
-}
-
-void __iomem *
-ioremap(phys_addr_t addr, unsigned long size)
-{
-	phys_addr_t addr64 = fixup_bigphys_addr(addr, size);
-
-	return ioremap64(addr64, size);
-}
-#endif /* CONFIG_PHYS_64BIT */
-
-void __iomem *
-__ioremap(phys_addr_t addr, unsigned long size, unsigned long flags)
-{
-	unsigned long v, i;
-	phys_addr_t p;
-	int err;
-
-	/*
-	 * Choose an address to map it to.
-	 * Once the vmalloc system is running, we use it.
-	 * Before then, we use space going down from ioremap_base
-	 * (ioremap_bot records where we're up to).
-	 */
-	p = addr & PAGE_MASK;
-	size = PAGE_ALIGN(addr + size) - p;
-
-	/*
-	 * If the address lies within the first 16 MB, assume it's in ISA
-	 * memory space
-	 */
-	if (p < 16*1024*1024)
-		p += _ISA_MEM_BASE;
-
-	/*
-	 * Don't allow anybody to remap normal RAM that we're using.
-	 * mem_init() sets high_memory so only do the check after that.
-	 */
-	if ( mem_init_done && (p < virt_to_phys(high_memory)) )
-	{
-		printk("__ioremap(): phys addr "PHYS_FMT" is RAM lr %p\n", p,
-		       __builtin_return_address(0));
-		return NULL;
-	}
-
-	if (size == 0)
-		return NULL;
-
-	/*
-	 * Is it already mapped?  Perhaps overlapped by a previous
-	 * BAT mapping.  If the whole area is mapped then we're done,
-	 * otherwise remap it since we want to keep the virt addrs for
-	 * each request contiguous.
-	 *
-	 * We make the assumption here that if the bottom and top
-	 * of the range we want are mapped then it's mapped to the
-	 * same virt address (and this is contiguous).
-	 *  -- Cort
-	 */
-	if ((v = p_mapped_by_bats(p)) /*&& p_mapped_by_bats(p+size-1)*/ )
-		goto out;
-
-	if (mem_init_done) {
-		struct vm_struct *area;
-		area = get_vm_area(size, VM_IOREMAP);
-		if (area == 0)
-			return NULL;
-		v = (unsigned long) area->addr;
-	} else {
-		v = (ioremap_bot -= size);
-	}
-
-	if ((flags & _PAGE_PRESENT) == 0)
-		flags |= _PAGE_KERNEL;
-	if (flags & _PAGE_NO_CACHE)
-		flags |= _PAGE_GUARDED;
-
-	/*
-	 * Should check if it is a candidate for a BAT mapping
-	 */
-
-	err = 0;
-	for (i = 0; i < size && err == 0; i += PAGE_SIZE)
-		err = map_page(v+i, p+i, flags);
-	if (err) {
-		if (mem_init_done)
-			vunmap((void *)v);
-		return NULL;
-	}
-
-out:
-	return (void __iomem *) (v + ((unsigned long)addr & ~PAGE_MASK));
-}
-
-void iounmap(volatile void __iomem *addr)
-{
-	/*
-	 * If mapped by BATs then there is nothing to do.
-	 * Calling vfree() generates a benign warning.
-	 */
-	if (v_mapped_by_bats((unsigned long)addr)) return;
-
-	if (addr > high_memory && (unsigned long) addr < ioremap_bot)
-		vunmap((void *) (PAGE_MASK & (unsigned long)addr));
-}
-
-void __iomem *ioport_map(unsigned long port, unsigned int len)
-{
-	return (void __iomem *) (port + _IO_BASE);
-}
-
-void ioport_unmap(void __iomem *addr)
-{
-	/* Nothing to do */
-}
-EXPORT_SYMBOL(ioport_map);
-EXPORT_SYMBOL(ioport_unmap);
-
-int
-map_page(unsigned long va, phys_addr_t pa, int flags)
-{
-	pmd_t *pd;
-	pte_t *pg;
-	int err = -ENOMEM;
-
-	/* Use upper 10 bits of VA to index the first level map */
-	pd = pmd_offset(pgd_offset_k(va), va);
-	/* Use middle 10 bits of VA to index the second-level map */
-	pg = pte_alloc_kernel(pd, va);
-	if (pg != 0) {
-		err = 0;
-		set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags)));
-		if (mem_init_done)
-			flush_HPTE(0, va, pmd_val(*pd));
-	}
-	return err;
-}
-
-/*
- * Map in all of physical memory starting at KERNELBASE.
- */
-void __init mapin_ram(void)
-{
-	unsigned long v, p, s, f;
-
-	s = mmu_mapin_ram();
-	v = KERNELBASE + s;
-	p = PPC_MEMSTART + s;
-	for (; s < total_lowmem; s += PAGE_SIZE) {
-		if ((char *) v >= _stext && (char *) v < etext)
-			f = _PAGE_RAM_TEXT;
-		else
-			f = _PAGE_RAM;
-		map_page(v, p, f);
-		v += PAGE_SIZE;
-		p += PAGE_SIZE;
-	}
-}
-
-/* is x a power of 4? */
-#define is_power_of_4(x)	is_power_of_2(x) && (ffs(x) & 1)
-
-/*
- * Set up a mapping for a block of I/O.
- * virt, phys, size must all be page-aligned.
- * This should only be called before ioremap is called.
- */
-void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
-			     unsigned int size, int flags)
-{
-	int i;
-
-	if (virt > KERNELBASE && virt < ioremap_bot)
-		ioremap_bot = ioremap_base = virt;
-
-#ifdef HAVE_BATS
-	/*
-	 * Use a BAT for this if possible...
-	 */
-	if (io_bat_index < 2 && is_power_of_2(size)
-	    && (virt & (size - 1)) == 0 && (phys & (size - 1)) == 0) {
-		setbat(io_bat_index, virt, phys, size, flags);
-		++io_bat_index;
-		return;
-	}
-#endif /* HAVE_BATS */
-
-	/* No BATs available, put it in the page tables. */
-	for (i = 0; i < size; i += PAGE_SIZE)
-		map_page(virt + i, phys + i, flags);
-}
-
-/* Scan the real Linux page tables and return a PTE pointer for
- * a virtual address in a context.
- * Returns true (1) if PTE was found, zero otherwise.  The pointer to
- * the PTE pointer is unmodified if PTE is not found.
- */
-int
-get_pteptr(struct mm_struct *mm, unsigned long addr, pte_t **ptep, pmd_t **pmdp)
-{
-        pgd_t	*pgd;
-        pmd_t	*pmd;
-        pte_t	*pte;
-        int     retval = 0;
-
-        pgd = pgd_offset(mm, addr & PAGE_MASK);
-        if (pgd) {
-                pmd = pmd_offset(pgd, addr & PAGE_MASK);
-                if (pmd_present(*pmd)) {
-                        pte = pte_offset_map(pmd, addr & PAGE_MASK);
-                        if (pte) {
-				retval = 1;
-				*ptep = pte;
-				if (pmdp)
-					*pmdp = pmd;
-				/* XXX caller needs to do pte_unmap, yuck */
-                        }
-                }
-        }
-        return(retval);
-}
-
-/* Find physical address for this virtual address.  Normally used by
- * I/O functions, but anyone can call it.
- */
-unsigned long iopa(unsigned long addr)
-{
-	unsigned long pa;
-
-	/* I don't know why this won't work on PMacs or CHRP.  It
-	 * appears there is some bug, or there is some implicit
-	 * mapping done not properly represented by BATs or in page
-	 * tables.......I am actively working on resolving this, but
-	 * can't hold up other stuff.  -- Dan
-	 */
-	pte_t *pte;
-	struct mm_struct *mm;
-
-	/* Check the BATs */
-	pa = v_mapped_by_bats(addr);
-	if (pa)
-		return pa;
-
-	/* Allow mapping of user addresses (within the thread)
-	 * for DMA if necessary.
-	 */
-	if (addr < TASK_SIZE)
-		mm = current->mm;
-	else
-		mm = &init_mm;
-
-	pa = 0;
-	if (get_pteptr(mm, addr, &pte, NULL)) {
-		pa = (pte_val(*pte) & PAGE_MASK) | (addr & ~PAGE_MASK);
-		pte_unmap(pte);
-	}
-
-	return(pa);
-}
-
diff --git a/arch/ppc/mm/ppc_mmu.c b/arch/ppc/mm/ppc_mmu.c
deleted file mode 100644
index 0c1dc155996a..000000000000
--- a/arch/ppc/mm/ppc_mmu.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * This file contains the routines for handling the MMU on those
- * PowerPC implementations where the MMU substantially follows the
- * architecture specification.  This includes the 6xx, 7xx, 7xxx,
- * and 8260 implementations but excludes the 8xx and 4xx.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-
-#include <asm/prom.h>
-#include <asm/mmu.h>
-#include <asm/machdep.h>
-
-#include "mmu_decl.h"
-#include "mem_pieces.h"
-
-PTE *Hash, *Hash_end;
-unsigned long Hash_size, Hash_mask;
-unsigned long _SDR1;
-
-union ubat {			/* BAT register values to be loaded */
-	BAT	bat;
-	u32	word[2];
-} BATS[4][2];			/* 4 pairs of IBAT, DBAT */
-
-struct batrange {		/* stores address ranges mapped by BATs */
-	unsigned long start;
-	unsigned long limit;
-	unsigned long phys;
-} bat_addrs[4];
-
-/*
- * Return PA for this VA if it is mapped by a BAT, or 0
- */
-unsigned long v_mapped_by_bats(unsigned long va)
-{
-	int b;
-	for (b = 0; b < 4; ++b)
-		if (va >= bat_addrs[b].start && va < bat_addrs[b].limit)
-			return bat_addrs[b].phys + (va - bat_addrs[b].start);
-	return 0;
-}
-
-/*
- * Return VA for a given PA or 0 if not mapped
- */
-unsigned long p_mapped_by_bats(unsigned long pa)
-{
-	int b;
-	for (b = 0; b < 4; ++b)
-		if (pa >= bat_addrs[b].phys
-	    	    && pa < (bat_addrs[b].limit-bat_addrs[b].start)
-		              +bat_addrs[b].phys)
-			return bat_addrs[b].start+(pa-bat_addrs[b].phys);
-	return 0;
-}
-
-unsigned long __init mmu_mapin_ram(void)
-{
-	unsigned long tot, bl, done;
-	unsigned long max_size = (256<<20);
-	unsigned long align;
-
-	if (__map_without_bats)
-		return 0;
-
-	/* Set up BAT2 and if necessary BAT3 to cover RAM. */
-
-	/* Make sure we don't map a block larger than the
-	   smallest alignment of the physical address. */
-	/* alignment of PPC_MEMSTART */
-	align = ~(PPC_MEMSTART-1) & PPC_MEMSTART;
-	/* set BAT block size to MIN(max_size, align) */
-	if (align && align < max_size)
-		max_size = align;
-
-	tot = total_lowmem;
-	for (bl = 128<<10; bl < max_size; bl <<= 1) {
-		if (bl * 2 > tot)
-			break;
-	}
-
-	setbat(2, KERNELBASE, PPC_MEMSTART, bl, _PAGE_RAM);
-	done = (unsigned long)bat_addrs[2].limit - KERNELBASE + 1;
-	if ((done < tot) && !bat_addrs[3].limit) {
-		/* use BAT3 to cover a bit more */
-		tot -= done;
-		for (bl = 128<<10; bl < max_size; bl <<= 1)
-			if (bl * 2 > tot)
-				break;
-		setbat(3, KERNELBASE+done, PPC_MEMSTART+done, bl, _PAGE_RAM);
-		done = (unsigned long)bat_addrs[3].limit - KERNELBASE + 1;
-	}
-
-	return done;
-}
-
-/*
- * Set up one of the I/D BAT (block address translation) register pairs.
- * The parameters are not checked; in particular size must be a power
- * of 2 between 128k and 256M.
- */
-void __init setbat(int index, unsigned long virt, unsigned long phys,
-		   unsigned int size, int flags)
-{
-	unsigned int bl;
-	int wimgxpp;
-	union ubat *bat = BATS[index];
-
-	if (((flags & _PAGE_NO_CACHE) == 0) &&
-	    cpu_has_feature(CPU_FTR_NEED_COHERENT))
-		flags |= _PAGE_COHERENT;
-
-	bl = (size >> 17) - 1;
-	if (PVR_VER(mfspr(SPRN_PVR)) != 1) {
-		/* 603, 604, etc. */
-		/* Do DBAT first */
-		wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE
-				   | _PAGE_COHERENT | _PAGE_GUARDED);
-		wimgxpp |= (flags & _PAGE_RW)? BPP_RW: BPP_RX;
-		bat[1].word[0] = virt | (bl << 2) | 2; /* Vs=1, Vp=0 */
-		bat[1].word[1] = phys | wimgxpp;
-#ifndef CONFIG_KGDB /* want user access for breakpoints */
-		if (flags & _PAGE_USER)
-#endif
-			bat[1].bat.batu.vp = 1;
-		if (flags & _PAGE_GUARDED) {
-			/* G bit must be zero in IBATs */
-			bat[0].word[0] = bat[0].word[1] = 0;
-		} else {
-			/* make IBAT same as DBAT */
-			bat[0] = bat[1];
-		}
-	} else {
-		/* 601 cpu */
-		if (bl > BL_8M)
-			bl = BL_8M;
-		wimgxpp = flags & (_PAGE_WRITETHRU | _PAGE_NO_CACHE
-				   | _PAGE_COHERENT);
-		wimgxpp |= (flags & _PAGE_RW)?
-			((flags & _PAGE_USER)? PP_RWRW: PP_RWXX): PP_RXRX;
-		bat->word[0] = virt | wimgxpp | 4;	/* Ks=0, Ku=1 */
-		bat->word[1] = phys | bl | 0x40;	/* V=1 */
-	}
-
-	bat_addrs[index].start = virt;
-	bat_addrs[index].limit = virt + ((bl + 1) << 17) - 1;
-	bat_addrs[index].phys = phys;
-}
-
-/*
- * Initialize the hash table and patch the instructions in hashtable.S.
- */
-void __init MMU_init_hw(void)
-{
-	unsigned int hmask, mb, mb2;
-	unsigned int n_hpteg, lg_n_hpteg;
-
-	extern unsigned int hash_page_patch_A[];
-	extern unsigned int hash_page_patch_B[], hash_page_patch_C[];
-	extern unsigned int hash_page[];
-	extern unsigned int flush_hash_patch_A[], flush_hash_patch_B[];
-
-	if (!cpu_has_feature(CPU_FTR_HPTE_TABLE)) {
-		/*
-		 * Put a blr (procedure return) instruction at the
-		 * start of hash_page, since we can still get DSI
-		 * exceptions on a 603.
-		 */
-		hash_page[0] = 0x4e800020;
-		flush_icache_range((unsigned long) &hash_page[0],
-				   (unsigned long) &hash_page[1]);
-		return;
-	}
-
-	if ( ppc_md.progress ) ppc_md.progress("hash:enter", 0x105);
-
-#define LG_HPTEG_SIZE	6		/* 64 bytes per HPTEG */
-#define SDR1_LOW_BITS	((n_hpteg - 1) >> 10)
-#define MIN_N_HPTEG	1024		/* min 64kB hash table */
-
-	/*
-	 * Allow 1 HPTE (1/8 HPTEG) for each page of memory.
-	 * This is less than the recommended amount, but then
-	 * Linux ain't AIX.
-	 */
-	n_hpteg = total_memory / (PAGE_SIZE * 8);
-	if (n_hpteg < MIN_N_HPTEG)
-		n_hpteg = MIN_N_HPTEG;
-	lg_n_hpteg = __ilog2(n_hpteg);
-	if (n_hpteg & (n_hpteg - 1)) {
-		++lg_n_hpteg;		/* round up if not power of 2 */
-		n_hpteg = 1 << lg_n_hpteg;
-	}
-	Hash_size = n_hpteg << LG_HPTEG_SIZE;
-
-	/*
-	 * Find some memory for the hash table.
-	 */
-	if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
-	Hash = mem_pieces_find(Hash_size, Hash_size);
-	cacheable_memzero(Hash, Hash_size);
-	_SDR1 = __pa(Hash) | SDR1_LOW_BITS;
-
-	Hash_end = (PTE *) ((unsigned long)Hash + Hash_size);
-
-	printk("Total memory = %ldMB; using %ldkB for hash table (at %p)\n",
-	       total_memory >> 20, Hash_size >> 10, Hash);
-
-
-	/*
-	 * Patch up the instructions in hashtable.S:create_hpte
-	 */
-	if ( ppc_md.progress ) ppc_md.progress("hash:patch", 0x345);
-	Hash_mask = n_hpteg - 1;
-	hmask = Hash_mask >> (16 - LG_HPTEG_SIZE);
-	mb2 = mb = 32 - LG_HPTEG_SIZE - lg_n_hpteg;
-	if (lg_n_hpteg > 16)
-		mb2 = 16 - LG_HPTEG_SIZE;
-
-	hash_page_patch_A[0] = (hash_page_patch_A[0] & ~0xffff)
-		| ((unsigned int)(Hash) >> 16);
-	hash_page_patch_A[1] = (hash_page_patch_A[1] & ~0x7c0) | (mb << 6);
-	hash_page_patch_A[2] = (hash_page_patch_A[2] & ~0x7c0) | (mb2 << 6);
-	hash_page_patch_B[0] = (hash_page_patch_B[0] & ~0xffff) | hmask;
-	hash_page_patch_C[0] = (hash_page_patch_C[0] & ~0xffff) | hmask;
-
-	/*
-	 * Ensure that the locations we've patched have been written
-	 * out from the data cache and invalidated in the instruction
-	 * cache, on those machines with split caches.
-	 */
-	flush_icache_range((unsigned long) &hash_page_patch_A[0],
-			   (unsigned long) &hash_page_patch_C[1]);
-
-	/*
-	 * Patch up the instructions in hashtable.S:flush_hash_page
-	 */
-	flush_hash_patch_A[0] = (flush_hash_patch_A[0] & ~0xffff)
-		| ((unsigned int)(Hash) >> 16);
-	flush_hash_patch_A[1] = (flush_hash_patch_A[1] & ~0x7c0) | (mb << 6);
-	flush_hash_patch_A[2] = (flush_hash_patch_A[2] & ~0x7c0) | (mb2 << 6);
-	flush_hash_patch_B[0] = (flush_hash_patch_B[0] & ~0xffff) | hmask;
-	flush_icache_range((unsigned long) &flush_hash_patch_A[0],
-			   (unsigned long) &flush_hash_patch_B[1]);
-
-	if ( ppc_md.progress ) ppc_md.progress("hash:done", 0x205);
-}
diff --git a/arch/ppc/mm/tlb.c b/arch/ppc/mm/tlb.c
deleted file mode 100644
index 4ff260bc9dd1..000000000000
--- a/arch/ppc/mm/tlb.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * This file contains the routines for TLB flushing.
- * On machines where the MMU uses a hash table to store virtual to
- * physical translations, these routines flush entries from the
- * hash table also.
- *  -- paulus
- *
- *  Derived from arch/ppc/mm/init.c:
- *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- *  Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- *  and Cort Dougan (PReP) (cort@cs.nmt.edu)
- *    Copyright (C) 1996 Paul Mackerras
- *  Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
- *
- *  Derived from "arch/i386/mm/init.c"
- *    Copyright (C) 1991, 1992, 1993, 1994  Linus Torvalds
- *
- *  This program is free software; you can redistribute it and/or
- *  modify it under the terms of the GNU General Public License
- *  as published by the Free Software Foundation; either version
- *  2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-#include <linux/pagemap.h>
-#include <asm/tlbflush.h>
-#include <asm/tlb.h>
-
-#include "mmu_decl.h"
-
-/*
- * Called when unmapping pages to flush entries from the TLB/hash table.
- */
-void flush_hash_entry(struct mm_struct *mm, pte_t *ptep, unsigned long addr)
-{
-	unsigned long ptephys;
-
-	if (Hash != 0) {
-		ptephys = __pa(ptep) & PAGE_MASK;
-		flush_hash_pages(mm->context.id, addr, ptephys, 1);
-	}
-}
-
-/*
- * Called by ptep_set_access_flags, must flush on CPUs for which the
- * DSI handler can't just "fixup" the TLB on a write fault
- */
-void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr)
-{
-	if (Hash != 0)
-		return;
-	_tlbie(addr);
-}
-
-/*
- * Called at the end of a mmu_gather operation to make sure the
- * TLB flush is completely done.
- */
-void tlb_flush(struct mmu_gather *tlb)
-{
-	if (Hash == 0) {
-		/*
-		 * 603 needs to flush the whole TLB here since
-		 * it doesn't use a hash table.
-		 */
-		_tlbia();
-	}
-}
-
-/*
- * TLB flushing:
- *
- *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
- *  - flush_tlb_page(vma, vmaddr) flushes one page
- *  - flush_tlb_range(vma, start, end) flushes a range of pages
- *  - flush_tlb_kernel_range(start, end) flushes kernel pages
- *
- * since the hardware hash table functions as an extension of the
- * tlb as far as the linux tables are concerned, flush it too.
- *    -- Cort
- */
-
-/*
- * 750 SMP is a Bad Idea because the 750 doesn't broadcast all
- * the cache operations on the bus.  Hence we need to use an IPI
- * to get the other CPU(s) to invalidate their TLBs.
- */
-#ifdef CONFIG_SMP_750
-#define FINISH_FLUSH	smp_send_tlb_invalidate(0)
-#else
-#define FINISH_FLUSH	do { } while (0)
-#endif
-
-static void flush_range(struct mm_struct *mm, unsigned long start,
-			unsigned long end)
-{
-	pmd_t *pmd;
-	unsigned long pmd_end;
-	int count;
-	unsigned int ctx = mm->context.id;
-
-	if (Hash == 0) {
-		_tlbia();
-		return;
-	}
-	start &= PAGE_MASK;
-	if (start >= end)
-		return;
-	end = (end - 1) | ~PAGE_MASK;
-	pmd = pmd_offset(pgd_offset(mm, start), start);
-	for (;;) {
-		pmd_end = ((start + PGDIR_SIZE) & PGDIR_MASK) - 1;
-		if (pmd_end > end)
-			pmd_end = end;
-		if (!pmd_none(*pmd)) {
-			count = ((pmd_end - start) >> PAGE_SHIFT) + 1;
-			flush_hash_pages(ctx, start, pmd_val(*pmd), count);
-		}
-		if (pmd_end == end)
-			break;
-		start = pmd_end + 1;
-		++pmd;
-	}
-}
-
-/*
- * Flush kernel TLB entries in the given range
- */
-void flush_tlb_kernel_range(unsigned long start, unsigned long end)
-{
-	flush_range(&init_mm, start, end);
-	FINISH_FLUSH;
-}
-
-/*
- * Flush all the (user) entries for the address space described by mm.
- */
-void flush_tlb_mm(struct mm_struct *mm)
-{
-	struct vm_area_struct *mp;
-
-	if (Hash == 0) {
-		_tlbia();
-		return;
-	}
-
-	for (mp = mm->mmap; mp != NULL; mp = mp->vm_next)
-		flush_range(mp->vm_mm, mp->vm_start, mp->vm_end);
-	FINISH_FLUSH;
-}
-
-void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr)
-{
-	struct mm_struct *mm;
-	pmd_t *pmd;
-
-	if (Hash == 0) {
-		_tlbie(vmaddr);
-		return;
-	}
-	mm = (vmaddr < TASK_SIZE)? vma->vm_mm: &init_mm;
-	pmd = pmd_offset(pgd_offset(mm, vmaddr), vmaddr);
-	if (!pmd_none(*pmd))
-		flush_hash_pages(mm->context.id, vmaddr, pmd_val(*pmd), 1);
-	FINISH_FLUSH;
-}
-
-/*
- * For each address in the range, find the pte for the address
- * and check _PAGE_HASHPTE bit; if it is set, find and destroy
- * the corresponding HPTE.
- */
-void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
-		     unsigned long end)
-{
-	flush_range(vma->vm_mm, start, end);
-	FINISH_FLUSH;
-}
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
deleted file mode 100644
index 76551b679030..000000000000
--- a/arch/ppc/platforms/4xx/Kconfig
+++ /dev/null
@@ -1,285 +0,0 @@
-config 4xx
-	bool
-	depends on 40x || 44x
-	default y
-
-config WANT_EARLY_SERIAL
-	bool
-	select SERIAL_8250
-	default n
-
-menu "IBM 4xx options"
-	depends on 4xx
-
-choice
-	prompt "Machine Type"
-	depends on 40x
-	default WALNUT
-
-config BUBINGA
-	bool "Bubinga"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM 405EP evaluation board.
-
-config CPCI405
-	bool "CPCI405"
-	help
-	  This option enables support for the CPCI405 board.
-
-config EP405
-	bool "EP405/EP405PC"
-	select EMBEDDEDBOOT
-	help
-	  This option enables support for the EP405/EP405PC boards.
-
-config REDWOOD_5
-	bool "Redwood-5"
-	help
-	  This option enables support for the IBM STB04 evaluation board.
-
-config REDWOOD_6
-	bool "Redwood-6"
-	help
-	  This option enables support for the IBM STBx25xx evaluation board.
-
-config SYCAMORE
-	bool "Sycamore"
-	help
-	  This option enables support for the IBM PPC405GPr evaluation board.
-
-config WALNUT
-	bool "Walnut"
-	help
-	  This option enables support for the IBM PPC405GP evaluation board.
-
-config XILINX_ML300
-	bool "Xilinx-ML300"
-	select XILINX_VIRTEX_II_PRO
-	select EMBEDDEDBOOT
-	help
-	  This option enables support for the Xilinx ML300 evaluation board.
-
-config XILINX_ML403
-	bool "Xilinx-ML403"
-	select XILINX_VIRTEX_4_FX
-	select EMBEDDEDBOOT
-	help
-	  This option enables support for the Xilinx ML403 evaluation board.
-endchoice
-
-choice
-	prompt "Machine Type"
-	depends on 44x
-	default EBONY
-
-config BAMBOO
-	bool "Bamboo"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440EP evaluation board.
-
-config EBONY
-	bool "Ebony"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440GP evaluation board.
-
-config LUAN
-	bool "Luan"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440SP evaluation board.
-
-config YUCCA
-	bool "Yucca"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the AMCC PPC440SPe evaluation board.
-
-config OCOTEA
-	bool "Ocotea"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the IBM PPC440GX evaluation board.
-
-config TAISHAN
-	bool "Taishan"
-	select WANT_EARLY_SERIAL
-	help
-	  This option enables support for the AMCC PPC440GX evaluation board.
-
-endchoice
-
-config EP405PC
-	bool "EP405PC Support"
-	depends on EP405
-
-
-# It's often necessary to know the specific 4xx processor type.
-# Fortunately, it is impled (so far) from the board type, so we
-# don't need to ask more redundant questions.
-config NP405H
-	bool
-	depends on ASH
-	default y
-
-config 440EP
-	bool
-	depends on BAMBOO
-	select PPC_FPU
-	default y
-
-config 440GP
-	bool
-	depends on EBONY
-	default y
-
-config 440GX
-	bool
-	depends on OCOTEA || TAISHAN
-	default y
-
-config 440SP
-	bool
-	depends on LUAN
-	default y
-
-config 440SPE
-	bool
-	depends on YUCCA
-	default y
-
-config 440
-	bool
-	depends on 440GP || 440SP || 440SPE || 440EP
-	default y
-
-config 440A
-	bool
-	depends on 440GX
-	default y
-
-config IBM440EP_ERR42
-	bool
-	depends on 440EP
-	default y
-
-# All 405-based cores up until the 405GPR and 405EP have this errata.
-config IBM405_ERR77
-	bool
-	depends on 40x && !403GCX && !405GPR && !405EP
-	default y
-
-# All 40x-based cores, up until the 405GPR and 405EP have this errata.
-config IBM405_ERR51
-	bool
-	depends on 40x && !405GPR && !405EP
-	default y
-
-config BOOKE
-	bool
-	depends on 44x
-	default y
-
-config IBM_OCP
-	bool
-	depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || YUCCA || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || TAISHAN || WALNUT
-	default y
-
-config IBM_EMAC4
-	bool
-	depends on 440GX || 440SP || 440SPE
-	default y
-
-config BIOS_FIXUP
-	bool
-	depends on BUBINGA || EP405 || SYCAMORE || WALNUT || CPCI405
-	default y
-
-# OAK doesn't exist but wanted to keep this around for any future 403GCX boards
-config 403GCX
-	bool
-	depends on OAK
-	default y
-
-config 405EP
-	bool
-	depends on BUBINGA
-	default y
-
-config 405GP
-	bool
-	depends on CPCI405 || EP405 || WALNUT
-	default y
-
-config 405GPR
-	bool
-	depends on SYCAMORE
-	default y
-
-config XILINX_VIRTEX_II_PRO
-	bool
-	select XILINX_VIRTEX
-
-config XILINX_VIRTEX_4_FX
-	bool
-	select XILINX_VIRTEX
-
-config XILINX_VIRTEX
-	bool
-
-config STB03xxx
-	bool
-	depends on REDWOOD_5 || REDWOOD_6
-	default y
-
-config EMBEDDEDBOOT
-	bool
-
-config IBM_OPENBIOS
-	bool
-	depends on ASH || REDWOOD_5 || REDWOOD_6
-	default y
-
-config PPC4xx_DMA
-	bool "PPC4xx DMA controller support"
-	depends on 4xx
-
-config PPC4xx_EDMA
-	bool
-	depends on !STB03xxx && PPC4xx_DMA
-	default y
-
-config PPC_GEN550
-	bool
-	depends on 4xx
-	default y
-
-choice
-	prompt "TTYS0 device and default console"
-	depends on 40x
-	default UART0_TTYS0
-
-config UART0_TTYS0
-	bool "UART0"
-
-config UART0_TTYS1
-	bool "UART1"
-
-endchoice
-
-config SERIAL_SICC
-	bool "SICC Serial port support"
-	depends on STB03xxx
-
-config UART1_DFLT_CONSOLE
-	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
-
-config SERIAL_SICC_CONSOLE
-	bool
-	depends on SERIAL_SICC && UART0_TTYS1
-	default y
-endmenu
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
deleted file mode 100644
index 723ad7985cc6..000000000000
--- a/arch/ppc/platforms/4xx/Makefile
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# Makefile for the PowerPC 4xx linux kernel.
-
-obj-$(CONFIG_BAMBOO)		+= bamboo.o
-obj-$(CONFIG_CPCI405)		+= cpci405.o
-obj-$(CONFIG_EBONY)		+= ebony.o
-obj-$(CONFIG_EP405)		+= ep405.o
-obj-$(CONFIG_BUBINGA)		+= bubinga.o
-obj-$(CONFIG_LUAN)		+= luan.o
-obj-$(CONFIG_YUCCA)		+= yucca.o
-obj-$(CONFIG_OCOTEA)		+= ocotea.o
-obj-$(CONFIG_REDWOOD_5)		+= redwood5.o
-obj-$(CONFIG_REDWOOD_6)		+= redwood6.o
-obj-$(CONFIG_SYCAMORE)		+= sycamore.o
-obj-$(CONFIG_TAISHAN)		+= taishan.o
-obj-$(CONFIG_WALNUT)		+= walnut.o
-obj-$(CONFIG_XILINX_ML300)	+= xilinx_ml300.o
-obj-$(CONFIG_XILINX_ML403)	+= xilinx_ml403.o
-
-obj-$(CONFIG_405GP)		+= ibm405gp.o
-obj-$(CONFIG_REDWOOD_5)		+= ibmstb4.o
-obj-$(CONFIG_NP405H)		+= ibmnp405h.o
-obj-$(CONFIG_REDWOOD_6)		+= ibmstbx25.o
-obj-$(CONFIG_440EP)		+= ibm440ep.o
-obj-$(CONFIG_440GP)		+= ibm440gp.o
-obj-$(CONFIG_440GX)		+= ibm440gx.o
-obj-$(CONFIG_440SP)		+= ibm440sp.o
-obj-$(CONFIG_440SPE)		+= ppc440spe.o
-obj-$(CONFIG_405EP)		+= ibm405ep.o
-obj-$(CONFIG_405GPR)		+= ibm405gpr.o
-
diff --git a/arch/ppc/platforms/4xx/bamboo.c b/arch/ppc/platforms/4xx/bamboo.c
deleted file mode 100644
index 01f20f4c14fe..000000000000
--- a/arch/ppc/platforms/4xx/bamboo.c
+++ /dev/null
@@ -1,442 +0,0 @@
-/*
- * Bamboo board specific routines
- *
- * Wade Farnsworth <wfarnsworth@mvista.com>
- * Copyright 2004 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/ethtool.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/pci-bridge.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/gen550.h>
-#include <syslib/ibm440gx_common.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-/*
- * Bamboo external IRQ triggering/polarity settings
- */
-unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ0: Ethernet transceiver */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* IRQ1: Expansion connector */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ2: PCI slot 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ3: PCI slot 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ4: PCI slot 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ5: PCI slot 3 */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE), /* IRQ6: SMI pushbutton */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ7: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ8: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* IRQ9: EXT */
-};
-
-static void __init
-bamboo_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	if (mfspr(SPRN_CCR1) & CCR1_TCS)
-		freq = BAMBOO_TMRCLK;
-	else
-		freq = clocks.cpu;
-
-	ibm44x_calibrate_decr(freq);
-
-}
-
-static int
-bamboo_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: PPC440EP EVB (Bamboo)\n");
-
-	return 0;
-}
-
-static inline int
-bamboo_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 28, 28, 28, 28 },	/* IDSEL 1 - PCI Slot 0 */
-		{ 27, 27, 27, 27 },	/* IDSEL 2 - PCI Slot 1 */
-		{ 26, 26, 26, 26 },	/* IDSEL 3 - PCI Slot 2 */
-		{ 25, 25, 25, 25 },	/* IDSEL 4 - PCI Slot 3 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __init bamboo_set_emacdata(void)
-{
-	u8 * base_addr;
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-	u8 val;
-	int mode;
-	u32 excluded = 0;
-
-	base_addr = ioremap64(BAMBOO_FPGA_SELECTION1_REG_ADDR, 16);
-	val = readb(base_addr);
-	iounmap((void *) base_addr);
-	if (BAMBOO_SEL_MII(val))
-		mode = PHY_MODE_MII;
-	else if (BAMBOO_SEL_RMII(val))
-		mode = PHY_MODE_RMII;
-	else
-		mode = PHY_MODE_SMII;
-
-	/*
-	 * SW2 on the Bamboo is used for ethernet configuration and is accessed
-	 * via the CONFIG2 register in the FPGA.  If the ANEG pin is set,
-	 * overwrite the supported features with the settings in SW2.
-	 *
-	 * This is used as a workaround for the improperly biased RJ-45 sockets
-	 * on the Rev. 0 Bamboo.  By default only 10baseT is functional.
-	 * Removing inductors L17 and L18 from the board allows 100baseT, but
-	 * disables 10baseT.  The Rev. 1 has no such limitations.
-	 */
-
-	base_addr = ioremap64(BAMBOO_FPGA_CONFIG2_REG_ADDR, 8);
-	val = readb(base_addr);
-	iounmap((void *) base_addr);
-	if (!BAMBOO_AUTONEGOTIATE(val)) {
-		excluded |= SUPPORTED_Autoneg;
-		if (BAMBOO_FORCE_100Mbps(val)) {
-			excluded |= SUPPORTED_10baseT_Full;
-			excluded |= SUPPORTED_10baseT_Half;
-			if (BAMBOO_FULL_DUPLEX_EN(val))
-				excluded |= SUPPORTED_100baseT_Half;
-			else
-				excluded |= SUPPORTED_100baseT_Full;
-		} else {
-			excluded |= SUPPORTED_100baseT_Full;
-			excluded |= SUPPORTED_100baseT_Half;
-			if (BAMBOO_FULL_DUPLEX_EN(val))
-				excluded |= SUPPORTED_10baseT_Half;
-			else
-				excluded |= SUPPORTED_10baseT_Full;
-		}
-	}
-
-	/* Set mac_addr, phy mode and unsupported phy features for each EMAC */
-
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
-	emacdata = def->additions;
-	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-	emacdata->phy_mode = mode;
-	emacdata->phy_feat_exc = excluded;
-
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1);
-	emacdata = def->additions;
-	memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
-	emacdata->phy_mode = mode;
-	emacdata->phy_feat_exc = excluded;
-}
-
-static int
-bamboo_exclude_device(unsigned char bus, unsigned char devfn)
-{
-	return (bus == 0 && devfn == 0);
-}
-
-#define PCI_READW(offset) \
-        (readw((void *)((u32)pci_reg_base+offset)))
-
-#define PCI_WRITEW(value, offset) \
-	(writew(value, (void *)((u32)pci_reg_base+offset)))
-
-#define PCI_WRITEL(value, offset) \
-	(writel(value, (void *)((u32)pci_reg_base+offset)))
-
-static void __init
-bamboo_setup_pci(void)
-{
-	void *pci_reg_base;
-	unsigned long memory_size;
-	memory_size = ppc_md.find_end_of_memory();
-
-	pci_reg_base = ioremap64(BAMBOO_PCIL0_BASE, BAMBOO_PCIL0_SIZE);
-
-	/* Enable PCI I/O, Mem, and Busmaster cycles */
-	PCI_WRITEW(PCI_READW(PCI_COMMAND) |
-		   PCI_COMMAND_MEMORY |
-		   PCI_COMMAND_MASTER, PCI_COMMAND);
-
-	/* Disable region first */
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM0MA);
-
-	/* PLB starting addr: 0x00000000A0000000 */
-	PCI_WRITEL(BAMBOO_PCI_PHY_MEM_BASE, BAMBOO_PCIL0_PMM0LA);
-
-	/* PCI start addr, 0xA0000000 (PCI Address) */
-	PCI_WRITEL(BAMBOO_PCI_MEM_BASE, BAMBOO_PCIL0_PMM0PCILA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM0PCIHA);
-
-	/* Enable no pre-fetch, enable region */
-	PCI_WRITEL(((0xffffffff -
-		     (BAMBOO_PCI_UPPER_MEM - BAMBOO_PCI_MEM_BASE)) | 0x01),
-		      BAMBOO_PCIL0_PMM0MA);
-
-	/* Disable region one */
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1LA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCILA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1PCIHA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM1MA);
-
-	/* Disable region two */
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2LA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCILA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2PCIHA);
-	PCI_WRITEL(0, BAMBOO_PCIL0_PMM2MA);
-
-	/* Now configure the PCI->PLB windows, we only use PTM1
-	 *
-	 * For Inbound flow, set the window size to all available memory
-	 * This is required because if size is smaller,
-	 * then Eth/PCI DD would fail as PCI card not able to access
-	 * the memory allocated by DD.
-	 */
-
-	PCI_WRITEL(0, BAMBOO_PCIL0_PTM1MS);	/* disabled region 1 */
-	PCI_WRITEL(0, BAMBOO_PCIL0_PTM1LA);	/* begin of address map */
-
-	memory_size = 1 << fls(memory_size - 1);
-
-	/* Size low + Enabled */
-	PCI_WRITEL((0xffffffff - (memory_size - 1)) | 0x1, BAMBOO_PCIL0_PTM1MS);
-
-	eieio();
-	iounmap(pci_reg_base);
-}
-
-static void __init
-bamboo_setup_hose(void)
-{
-	unsigned int bar_response, bar;
-	struct pci_controller *hose;
-
-	bamboo_setup_pci();
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	hose->pci_mem_offset = BAMBOO_PCI_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			BAMBOO_PCI_LOWER_IO,
-			BAMBOO_PCI_UPPER_IO,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			BAMBOO_PCI_LOWER_MEM,
-			BAMBOO_PCI_UPPER_MEM,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	ppc_md.pci_exclude_device = bamboo_exclude_device;
-
-	hose->io_space.start = BAMBOO_PCI_LOWER_IO;
-	hose->io_space.end = BAMBOO_PCI_UPPER_IO;
-	hose->mem_space.start = BAMBOO_PCI_LOWER_MEM;
-	hose->mem_space.end = BAMBOO_PCI_UPPER_MEM;
-	isa_io_base =
-		(unsigned long)ioremap64(BAMBOO_PCI_IO_BASE, BAMBOO_PCI_IO_SIZE);
-	hose->io_base_virt = (void *)isa_io_base;
-
-	setup_indirect_pci(hose,
-			BAMBOO_PCI_CFGA_PLB32,
-			BAMBOO_PCI_CFGD_PLB32);
-	hose->set_cfg_type = 1;
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-	}
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = bamboo_map_irq;
-}
-
-TODC_ALLOC();
-
-static void __init
-bamboo_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440EP_UART0_ADDR, 8);
-	port.irq = 0;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(0, &port);
-#endif
-
-	port.membase = ioremap64(PPC440EP_UART1_ADDR, 8);
-	port.irq = 1;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(1, &port);
-#endif
-
-	port.membase = ioremap64(PPC440EP_UART2_ADDR, 8);
-	port.irq = 3;
-	port.uartclk = clocks.uart2;
-	port.line = 2;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 2 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(2, &port);
-#endif
-
-	port.membase = ioremap64(PPC440EP_UART3_ADDR, 8);
-	port.irq = 4;
-	port.uartclk = clocks.uart3;
-	port.line = 3;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 3 failed\n");
-	}
-}
-
-static void __init
-bamboo_setup_arch(void)
-{
-
-	bamboo_set_emacdata();
-
-	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* Setup TODC access */
-	TODC_INIT(TODC_TYPE_DS1743,
-			0,
-			0,
-			ioremap64(BAMBOO_RTC_ADDR, BAMBOO_RTC_SIZE),
-			8);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-        loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCI host bridge */
-	bamboo_setup_hose();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	bamboo_early_serial_map();
-
-	/* Identify the system */
-	printk("IBM Bamboo port (MontaVista Software, Inc. (source@mvista.com))\n");
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = bamboo_setup_arch;
-	ppc_md.show_cpuinfo = bamboo_show_cpuinfo;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = bamboo_calibrate_decr;
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = bamboo_early_serial_map;
-#endif
-}
-
diff --git a/arch/ppc/platforms/4xx/bamboo.h b/arch/ppc/platforms/4xx/bamboo.h
deleted file mode 100644
index dcd3d09a0a71..000000000000
--- a/arch/ppc/platforms/4xx/bamboo.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Bamboo board definitions
- *
- * Wade Farnsworth <wfarnsworth@mvista.com>
- *
- * Copyright 2004 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_BAMBOO_H__
-#define __ASM_BAMBOO_H__
-
-#include <platforms/4xx/ibm440ep.h>
-
-/* F/W TLB mapping used in bootloader glue to reset EMAC */
-#define PPC44x_EMAC0_MR0		0x0EF600E00
-
-/* Location of MAC addresses in PIBS image */
-#define PIBS_FLASH_BASE			0xfff00000
-#define PIBS_MAC_BASE			(PIBS_FLASH_BASE+0xc0400)
-#define PIBS_MAC_SIZE			0x200
-#define PIBS_MAC_OFFSET			0x100
-
-/* Default clock rate */
-#define BAMBOO_TMRCLK			25000000
-
-/* RTC/NVRAM location */
-#define BAMBOO_RTC_ADDR			0x080000000ULL
-#define BAMBOO_RTC_SIZE			0x2000
-
-/* FPGA Registers */
-#define BAMBOO_FPGA_ADDR		0x080002000ULL
-
-#define BAMBOO_FPGA_CONFIG2_REG_ADDR	(BAMBOO_FPGA_ADDR + 0x1)
-#define BAMBOO_FULL_DUPLEX_EN(x)	(x & 0x08)
-#define BAMBOO_FORCE_100Mbps(x)		(x & 0x04)
-#define BAMBOO_AUTONEGOTIATE(x)		(x & 0x02)
-
-#define BAMBOO_FPGA_SETTING_REG_ADDR	(BAMBOO_FPGA_ADDR + 0x3)
-#define BAMBOO_BOOT_SMALL_FLASH(x)	(!(x & 0x80))
-#define BAMBOO_LARGE_FLASH_EN(x)	(!(x & 0x40))
-#define BAMBOO_BOOT_NAND_FLASH(x)	(!(x & 0x20))
-
-#define BAMBOO_FPGA_SELECTION1_REG_ADDR (BAMBOO_FPGA_ADDR + 0x4)
-#define BAMBOO_SEL_MII(x)		(x & 0x80)
-#define BAMBOO_SEL_RMII(x)		(x & 0x40)
-#define BAMBOO_SEL_SMII(x)		(x & 0x20)
-
-/* Flash */
-#define BAMBOO_SMALL_FLASH_LOW		0x087f00000ULL
-#define BAMBOO_SMALL_FLASH_HIGH		0x0fff00000ULL
-#define BAMBOO_SMALL_FLASH_SIZE		0x100000
-#define BAMBOO_LARGE_FLASH_LOW		0x087800000ULL
-#define BAMBOO_LARGE_FLASH_HIGH1	0x0ff800000ULL
-#define BAMBOO_LARGE_FLASH_HIGH2	0x0ffc00000ULL
-#define BAMBOO_LARGE_FLASH_SIZE		0x400000
-#define BAMBOO_SRAM_LOW			0x087f00000ULL
-#define BAMBOO_SRAM_HIGH1		0x0fff00000ULL
-#define BAMBOO_SRAM_HIGH2		0x0ff800000ULL
-#define BAMBOO_SRAM_SIZE		0x100000
-#define BAMBOO_NAND_FLASH_REG_ADDR	0x090000000ULL
-#define BAMBOO_NAND_FLASH_REG_SIZE	0x2000
-
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE			4
-
-#define UART0_IO_BASE			0xEF600300
-#define UART1_IO_BASE			0xEF600400
-#define UART2_IO_BASE			0xEF600500
-#define UART3_IO_BASE			0xEF600600
-
-#define BASE_BAUD			33177600/3/16
-#define UART0_INT			0
-#define UART1_INT			1
-#define UART2_INT			3
-#define UART3_INT			4
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)		\
-	STD_UART_OP(2)		\
-	STD_UART_OP(3)
-
-/* PCI support */
-#define BAMBOO_PCI_CFGA_PLB32		0xeec00000
-#define BAMBOO_PCI_CFGD_PLB32		0xeec00004
-
-#define BAMBOO_PCI_IO_BASE		0x00000000e8000000ULL
-#define BAMBOO_PCI_IO_SIZE		0x00010000
-#define BAMBOO_PCI_MEM_OFFSET		0x00000000
-#define BAMBOO_PCI_PHY_MEM_BASE		0x00000000a0000000ULL
-
-#define BAMBOO_PCI_LOWER_IO		0x00000000
-#define BAMBOO_PCI_UPPER_IO		0x0000ffff
-#define BAMBOO_PCI_LOWER_MEM		0xa0000000
-#define BAMBOO_PCI_UPPER_MEM		0xafffffff
-#define BAMBOO_PCI_MEM_BASE		0xa0000000
-
-#define BAMBOO_PCIL0_BASE		0x00000000ef400000ULL
-#define BAMBOO_PCIL0_SIZE		0x40
-
-#define BAMBOO_PCIL0_PMM0LA		0x000
-#define BAMBOO_PCIL0_PMM0MA		0x004
-#define BAMBOO_PCIL0_PMM0PCILA		0x008
-#define BAMBOO_PCIL0_PMM0PCIHA		0x00C
-#define BAMBOO_PCIL0_PMM1LA		0x010
-#define BAMBOO_PCIL0_PMM1MA		0x014
-#define BAMBOO_PCIL0_PMM1PCILA		0x018
-#define BAMBOO_PCIL0_PMM1PCIHA		0x01C
-#define BAMBOO_PCIL0_PMM2LA		0x020
-#define BAMBOO_PCIL0_PMM2MA		0x024
-#define BAMBOO_PCIL0_PMM2PCILA		0x028
-#define BAMBOO_PCIL0_PMM2PCIHA		0x02C
-#define BAMBOO_PCIL0_PTM1MS		0x030
-#define BAMBOO_PCIL0_PTM1LA		0x034
-#define BAMBOO_PCIL0_PTM2MS		0x038
-#define BAMBOO_PCIL0_PTM2LA		0x03C
-
-#endif                          /* __ASM_BAMBOO_H__ */
-#endif                          /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/bubinga.c b/arch/ppc/platforms/4xx/bubinga.c
deleted file mode 100644
index cd696be55aca..000000000000
--- a/arch/ppc/platforms/4xx/bubinga.c
+++ /dev/null
@@ -1,265 +0,0 @@
-/*
- * Support for IBM PPC 405EP evaluation board (Bubinga).
- *
- * Author: SAW (IBM), derived from walnut.c.
- *         Maintained by MontaVista Software <source@mvista.com>
- *
- * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/blkdev.h>
-#include <linux/pci.h>
-#include <linux/rtc.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/processor.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/todc.h>
-#include <asm/kgdb.h>
-#include <asm/ocp.h>
-#include <asm/ibm_ocp_pci.h>
-
-#include <platforms/4xx/ibm405ep.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-extern bd_t __res;
-
-void *bubinga_rtc_base;
-
-/* Some IRQs unique to the board
- * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
- */
-int __init
-ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *      A       B       C       D
-	     */
-	{
-		{28, 28, 28, 28},	/* IDSEL 1 - PCI slot 1 */
-		{29, 29, 29, 29},	/* IDSEL 2 - PCI slot 2 */
-		{30, 30, 30, 30},	/* IDSEL 3 - PCI slot 3 */
-		{31, 31, 31, 31},	/* IDSEL 4 - PCI slot 4 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-/* The serial clock for the chip is an internal clock determined by
- * different clock speeds/dividers.
- * Calculate the proper input baud rate and setup the serial driver.
- */
-static void __init
-bubinga_early_serial_map(void)
-{
-	u32 uart_div;
-	int uart_clock;
-	struct uart_port port;
-
-         /* Calculate the serial clock input frequency
-          *
-          * The base baud is the PLL OUTA (provided in the board info
-          * structure) divided by the external UART Divisor, divided
-          * by 16.
-          */
-	uart_div = (mfdcr(DCRN_CPC0_UCR_BASE) & DCRN_CPC0_UCR_U0DIV);
-	uart_clock = __res.bi_procfreq / uart_div;
-
-	/* Setup serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = (void*)ACTING_UART0_IO_BASE;
-	port.irq = ACTING_UART0_INT;
-	port.uartclk = uart_clock;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-	port.membase = (void*)ACTING_UART1_IO_BASE;
-	port.irq = ACTING_UART1_INT;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
-#ifdef CONFIG_PCI
-
-	unsigned int bar_response, bar;
-	/*
-	 * Expected PCI mapping:
-	 *
-	 *  PLB addr             PCI memory addr
-	 *  ---------------------       ---------------------
-	 *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
-	 *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
-	 *
-	 *  PLB addr             PCI io addr
-	 *  ---------------------       ---------------------
-	 *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
-	 *
-	 * The following code is simplified by assuming that the bootrom
-	 * has been well behaved in following this mapping.
-	 */
-
-#ifdef DEBUG
-	int i;
-
-	printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
-	printk("PCI bridge regs before fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-
-	/* added for IBM boot rom version 1.15 bios bar changes  -AK */
-
-	/* Disable region first */
-	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
-	/* PLB starting addr, PCI: 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
-	/* PCI start addr, 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
-	/* 512MB range of PLB to PCI */
-	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
-	/* Enable no pre-fetch, enable region */
-	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
-						(PPC405_PCI_UPPER_MEM -
-						 PPC405_PCI_MEM_BASE)) | 0x01));
-
-	/* Disable region one */
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm1ms), 0x00000001);
-
-	/* Disable region two */
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-	out_le32((void *) &(pcip->ptm2la), 0x00000000);
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-		DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
-		    hose->first_busno, PCI_SLOT(hose->first_busno),
-		    PCI_FUNC(hose->first_busno), bar, bar_response);
-	}
-	/* end workaround */
-
-#ifdef DEBUG
-	printk("PCI bridge regs after fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-#endif
-}
-
-void __init
-bubinga_setup_arch(void)
-{
-	ppc4xx_setup_arch();
-
-	ibm_ocp_set_emac(0, 1);
-
-        bubinga_early_serial_map();
-
-        /* RTC step for the evb405ep */
-        bubinga_rtc_base = (void *) BUBINGA_RTC_VADDR;
-        TODC_INIT(TODC_TYPE_DS1743, bubinga_rtc_base, bubinga_rtc_base,
-                  bubinga_rtc_base, 8);
-        /* Identify the system */
-        printk("IBM Bubinga port (MontaVista Software, Inc. <source@mvista.com>)\n");
-}
-
-void __init
-bubinga_map_io(void)
-{
-	ppc4xx_map_io();
-     	io_block_mapping(BUBINGA_RTC_VADDR,
-                         BUBINGA_RTC_PADDR, BUBINGA_RTC_SIZE, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = bubinga_setup_arch;
-	ppc_md.setup_io_mappings = bubinga_map_io;
-
-#ifdef CONFIG_GEN_RTC
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#endif
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = bubinga_early_serial_map;
-#endif
-}
-
diff --git a/arch/ppc/platforms/4xx/bubinga.h b/arch/ppc/platforms/4xx/bubinga.h
deleted file mode 100644
index 5c408060eb35..000000000000
--- a/arch/ppc/platforms/4xx/bubinga.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Bubinga board definitions
- *
- * Copyright (c) 2005 DENX Software Engineering
- * Stefan Roese <sr@denx.de>
- *
- * Based on original work by
- *	SAW (IBM)
- *	2003 (c) MontaVista Softare Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __BUBINGA_H__
-#define __BUBINGA_H__
-
-#include <platforms/4xx/ibm405ep.h>
-#include <asm/ppcboot.h>
-
-/* Memory map for the Bubinga board.
- * Generic 4xx plus RTC.
- */
-
-#define BUBINGA_RTC_PADDR	((uint)0xf0000000)
-#define BUBINGA_RTC_VADDR	BUBINGA_RTC_PADDR
-#define BUBINGA_RTC_SIZE	((uint)8*1024)
-
-/* The UART clock is based off an internal clock -
- * define BASE_BAUD based on the internal clock and divider(s).
- * Since BASE_BAUD must be a constant, we will initialize it
- * using clock/divider values which OpenBIOS initializes
- * for typical configurations at various CPU speeds.
- * The base baud is calculated as (FWDA / EXT UART DIV / 16)
- */
-#define BASE_BAUD		0
-
-/* Flash */
-#define PPC40x_FPGA_BASE	0xF0300000
-#define PPC40x_FPGA_REG_OFFS	1	/* offset to flash map reg */
-#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
-#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
-#define PPC40x_FLASH_LOW	0xFFF00000
-#define PPC40x_FLASH_HIGH	0xFFF80000
-#define PPC40x_FLASH_SIZE	0x80000
-
-#define PPC4xx_MACHINE_NAME	"IBM Bubinga"
-
-#endif /* __BUBINGA_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/cpci405.c b/arch/ppc/platforms/4xx/cpci405.c
deleted file mode 100644
index 2e7e25dd84cb..000000000000
--- a/arch/ppc/platforms/4xx/cpci405.c
+++ /dev/null
@@ -1,201 +0,0 @@
-/*
- * Board setup routines for the esd CPCI-405 cPCI Board.
- *
- * Copyright 2001-2006 esd electronic system design - hannover germany
- *
- * Authors: Matthias Fuchs
- *          matthias.fuchs@esd-electronics.com
- *          Stefan Roese
- *          stefan.roese@esd-electronics.com
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/todc.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <asm/ocp.h>
-#include <asm/ibm_ocp_pci.h>
-#include <platforms/4xx/ibm405gp.h>
-
-#ifdef CONFIG_GEN_RTC
-void *cpci405_nvram;
-#endif
-
-extern bd_t __res;
-
-/*
- * Some IRQs unique to CPCI-405.
- */
-int __init
-ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *      PCI IDSEL/INTPIN->INTLINE
-	 *      A       B       C       D
-	 */
-	{
-		{28,	29,	30,	27},	/* IDSEL 15 - cPCI slot 8 */
-		{29,	30,	27,	28},	/* IDSEL 16 - cPCI slot 7 */
-		{30,	27,	28,	29},	/* IDSEL 17 - cPCI slot 6 */
-		{27,	28,	29,	30},	/* IDSEL 18 - cPCI slot 5 */
-		{28,	29,	30,	27},	/* IDSEL 19 - cPCI slot 4 */
-		{29,	30,	27,	28},	/* IDSEL 20 - cPCI slot 3 */
-		{30,	27,	28,	29},	/* IDSEL 21 - cPCI slot 2 */
-        };
-	const long min_idsel = 15, max_idsel = 21, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-/* The serial clock for the chip is an internal clock determined by
- * different clock speeds/dividers.
- * Calculate the proper input baud rate and setup the serial driver.
- */
-static void __init
-cpci405_early_serial_map(void)
-{
-	u32 uart_div;
-	int uart_clock;
-	struct uart_port port;
-
-         /* Calculate the serial clock input frequency
-          *
-          * The uart clock is the cpu frequency (provided in the board info
-          * structure) divided by the external UART Divisor.
-          */
-	uart_div = ((mfdcr(DCRN_CHCR_BASE) & CHR0_UDIV) >> 1) + 1;
-	uart_clock = __res.bi_procfreq / uart_div;
-
-	/* Setup serial port access */
-	memset(&port, 0, sizeof(port));
-#if defined(CONFIG_UART0_TTYS0)
-	port.membase = (void*)UART0_IO_BASE;
-	port.irq = UART0_INT;
-#else
-	port.membase = (void*)UART1_IO_BASE;
-	port.irq = UART1_INT;
-#endif
-	port.uartclk = uart_clock;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-#if defined(CONFIG_UART0_TTYS0)
-	port.membase = (void*)UART1_IO_BASE;
-	port.irq = UART1_INT;
-#else
-	port.membase = (void*)UART0_IO_BASE;
-	port.irq = UART0_INT;
-#endif
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-}
-
-void __init
-cpci405_setup_arch(void)
-{
-	ppc4xx_setup_arch();
-
-	ibm_ocp_set_emac(0, 0);
-
-        cpci405_early_serial_map();
-
-#ifdef CONFIG_GEN_RTC
-	TODC_INIT(TODC_TYPE_MK48T35,
-		  cpci405_nvram, cpci405_nvram, cpci405_nvram, 8);
-#endif
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
-#ifdef CONFIG_PCI
-	unsigned int bar_response, bar;
-
-	/* Disable region first */
-	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
-	/* PLB starting addr, PCI: 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
-	/* PCI start addr, 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
-	/* 512MB range of PLB to PCI */
-	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
-	/* Enable no pre-fetch, enable region */
-	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
-						(PPC405_PCI_UPPER_MEM -
-						 PPC405_PCI_MEM_BASE)) | 0x01));
-
-	/* Disable region one */
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm1ms), 0x00000001);
-
-	/* Disable region two */
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-	out_le32((void *) &(pcip->ptm2la), 0x00000000);
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-	}
-#endif
-}
-
-void __init
-cpci405_map_io(void)
-{
-	ppc4xx_map_io();
-
-#ifdef CONFIG_GEN_RTC
-	cpci405_nvram = ioremap(CPCI405_NVRAM_PADDR, CPCI405_NVRAM_SIZE);
-#endif
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = cpci405_setup_arch;
-	ppc_md.setup_io_mappings = cpci405_map_io;
-
-#ifdef CONFIG_GEN_RTC
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#endif
-}
diff --git a/arch/ppc/platforms/4xx/cpci405.h b/arch/ppc/platforms/4xx/cpci405.h
deleted file mode 100644
index a6c0a138b0d7..000000000000
--- a/arch/ppc/platforms/4xx/cpci405.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * CPCI-405 board specific definitions
- *
- * Copyright 2001-2006 esd electronic system design - hannover germany
- *
- * Authors: Matthias Fuchs
- *          matthias.fuchs@esd-electronics.com
- *          Stefan Roese
- *          stefan.roese@esd-electronics.com
- */
-
-#ifdef __KERNEL__
-#ifndef __CPCI405_H__
-#define __CPCI405_H__
-
-#include <platforms/4xx/ibm405gp.h>
-#include <asm/ppcboot.h>
-
-/* Map for the NVRAM space */
-#define CPCI405_NVRAM_PADDR	((uint)0xf0200000)
-#define CPCI405_NVRAM_SIZE	((uint)32*1024)
-
-#define BASE_BAUD		0
-
-#define PPC4xx_MACHINE_NAME     "esd CPCI-405"
-
-#endif	/* __CPCI405_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ebony.c b/arch/ppc/platforms/4xx/ebony.c
deleted file mode 100644
index 8027a36fc5bb..000000000000
--- a/arch/ppc/platforms/4xx/ebony.c
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
- * Ebony board specific routines
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003-2005 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/pci-bridge.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/ppcboot.h>
-#include <asm/tlbflush.h>
-
-#include <syslib/gen550.h>
-#include <syslib/ibm440gp_common.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-/*
- * Ebony external IRQ triggering/polarity settings
- */
-unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ0: PCI slot 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ1: PCI slot 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ2: PCI slot 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ3: PCI slot 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ4: IRDA */
-	(IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE),	/* IRQ5: SMI pushbutton */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ6: PHYs */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ7: AUX */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ8: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ9: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ10: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ11: EXT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ12: EXT */
-};
-
-static void __init
-ebony_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	/*
-	 * Determine system clock speed
-	 *
-	 * If we are on Rev. B silicon, then use
-	 * default external system clock.  If we are
-	 * on Rev. C silicon then errata forces us to
-	 * use the internal clock.
-	 */
-	if (strcmp(cur_cpu_spec->cpu_name, "440GP Rev. B") == 0)
-		freq = EBONY_440GP_RB_SYSCLK;
-	else
-		freq = EBONY_440GP_RC_SYSCLK;
-
-	ibm44x_calibrate_decr(freq);
-}
-
-static int
-ebony_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: Ebony\n");
-
-	return 0;
-}
-
-static inline int
-ebony_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 23, 23, 23, 23 },	/* IDSEL 1 - PCI Slot 0 */
-		{ 24, 24, 24, 24 },	/* IDSEL 2 - PCI Slot 1 */
-		{ 25, 25, 25, 25 },	/* IDSEL 3 - PCI Slot 2 */
-		{ 26, 26, 26, 26 },	/* IDSEL 4 - PCI Slot 3 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-#define PCIX_WRITEL(value, offset) \
-	(writel(value, pcix_reg_base + offset))
-
-/*
- * FIXME: This is only here to "make it work".  This will move
- * to a ibm_pcix.c which will contain a generic IBM PCIX bridge
- * configuration library. -Matt
- */
-static void __init
-ebony_setup_pcix(void)
-{
-	void __iomem *pcix_reg_base;
-
-	pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE);
-
-	/* Disable all windows */
-	PCIX_WRITEL(0, PCIX0_POM0SA);
-	PCIX_WRITEL(0, PCIX0_POM1SA);
-	PCIX_WRITEL(0, PCIX0_POM2SA);
-	PCIX_WRITEL(0, PCIX0_PIM0SA);
-	PCIX_WRITEL(0, PCIX0_PIM1SA);
-	PCIX_WRITEL(0, PCIX0_PIM2SA);
-
-	/* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
-	PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
-	PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
-	PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
-
-	/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
-	PCIX_WRITEL(0x80000007, PCIX0_PIM0SA);
-
-	eieio();
-}
-
-static void __init
-ebony_setup_hose(void)
-{
-	struct pci_controller *hose;
-
-	/* Configure windows on the PCI-X host bridge */
-	ebony_setup_pcix();
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	hose->pci_mem_offset = EBONY_PCI_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			EBONY_PCI_LOWER_IO,
-			EBONY_PCI_UPPER_IO,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			EBONY_PCI_LOWER_MEM,
-			EBONY_PCI_UPPER_MEM,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = EBONY_PCI_LOWER_IO;
-	hose->io_space.end = EBONY_PCI_UPPER_IO;
-	hose->mem_space.start = EBONY_PCI_LOWER_MEM;
-	hose->mem_space.end = EBONY_PCI_UPPER_MEM;
-	hose->io_base_virt = ioremap64(EBONY_PCI_IO_BASE, EBONY_PCI_IO_SIZE);
-	isa_io_base = (unsigned long)hose->io_base_virt;
-
-	setup_indirect_pci(hose,
-			EBONY_PCI_CFGA_PLB32,
-			EBONY_PCI_CFGD_PLB32);
-	hose->set_cfg_type = 1;
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ebony_map_irq;
-}
-
-TODC_ALLOC();
-
-static void __init
-ebony_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440GP_UART0_ADDR, 8);
-	port.irq = 0;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(0, &port);
-
-	/* Purge TLB entry added in head_44x.S for early serial access */
-	_tlbie(UART0_IO_BASE, 0);
-#endif
-
-	port.membase = ioremap64(PPC440GP_UART1_ADDR, 8);
-	port.irq = 1;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(1, &port);
-#endif
-}
-
-static void __init
-ebony_setup_arch(void)
-{
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-
-	/* Set mac_addr for each EMAC */
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
-	emacdata = def->additions;
-	emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-	emacdata->phy_mode = PHY_MODE_RMII;
-	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 1);
-	emacdata = def->additions;
-	emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-	emacdata->phy_mode = PHY_MODE_RMII;
-	memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	ibm440gp_get_clocks(&clocks, 33333333, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* Setup TODC access */
-	TODC_INIT(TODC_TYPE_DS1743,
-			0,
-			0,
-			ioremap64(EBONY_RTC_ADDR, EBONY_RTC_SIZE),
-			8);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-        loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCI host bridge */
-	ebony_setup_hose();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	ebony_early_serial_map();
-
-	/* Identify the system */
-	printk("IBM Ebony port (MontaVista Software, Inc. (source@mvista.com))\n");
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = ebony_setup_arch;
-	ppc_md.show_cpuinfo = ebony_show_cpuinfo;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = ebony_calibrate_decr;
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = ebony_early_serial_map;
-#endif
-}
-
diff --git a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h
deleted file mode 100644
index f40e33d39d76..000000000000
--- a/arch/ppc/platforms/4xx/ebony.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * Ebony board definitions
- *
- * Matt Porter <mporter@mvista.com>
- *
- * Copyright 2002 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_EBONY_H__
-#define __ASM_EBONY_H__
-
-#include <platforms/4xx/ibm440gp.h>
-
-/* F/W TLB mapping used in bootloader glue to reset EMAC */
-#define PPC44x_EMAC0_MR0	0xE0000800
-
-/* Where to find the MAC info */
-#define OPENBIOS_MAC_BASE	0xfffffe0c
-#define OPENBIOS_MAC_OFFSET	0x0c
-
-/* Default clock rates for Rev. B and Rev. C silicon */
-#define EBONY_440GP_RB_SYSCLK	33000000
-#define EBONY_440GP_RC_SYSCLK	400000000
-
-/* RTC/NVRAM location */
-#define EBONY_RTC_ADDR		0x0000000148000000ULL
-#define EBONY_RTC_SIZE		0x2000
-
-/* Flash */
-#define EBONY_FPGA_ADDR		0x0000000148300000ULL
-#define EBONY_BOOT_SMALL_FLASH(x)	(x & 0x20)
-#define EBONY_ONBRD_FLASH_EN(x)		(x & 0x02)
-#define EBONY_FLASH_SEL(x)		(x & 0x01)
-#define EBONY_SMALL_FLASH_LOW1	0x00000001ff800000ULL
-#define EBONY_SMALL_FLASH_LOW2	0x00000001ff880000ULL
-#define EBONY_SMALL_FLASH_HIGH1	0x00000001fff00000ULL
-#define EBONY_SMALL_FLASH_HIGH2	0x00000001fff80000ULL
-#define EBONY_SMALL_FLASH_SIZE	0x80000
-#define EBONY_LARGE_FLASH_LOW	0x00000001ff800000ULL
-#define EBONY_LARGE_FLASH_HIGH	0x00000001ffc00000ULL
-#define EBONY_LARGE_FLASH_SIZE	0x400000
-
-#define EBONY_SMALL_FLASH_BASE	0x00000001fff80000ULL
-#define EBONY_LARGE_FLASH_BASE	0x00000001ff800000ULL
-
-/*
- * Serial port defines
- */
-
-#if defined(__BOOTER__)
-/* OpenBIOS defined UART mappings, used by bootloader shim */
-#define UART0_IO_BASE	0xE0000200
-#define UART1_IO_BASE	0xE0000300
-#else
-/* head_44x.S created UART mapping, used before early_serial_setup.
- * We cannot use default OpenBIOS UART mappings because they
- * don't work for configurations with more than 512M RAM.    --ebs
- */
-#define UART0_IO_BASE	0xF0000200
-#define UART1_IO_BASE	0xF0000300
-#endif
-
-/* external Epson SG-615P */
-#define BASE_BAUD	691200
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-
-/* PCI support */
-#define EBONY_PCI_LOWER_IO	0x00000000
-#define EBONY_PCI_UPPER_IO	0x0000ffff
-#define EBONY_PCI_LOWER_MEM	0x80002000
-#define EBONY_PCI_UPPER_MEM	0xffffefff
-
-#define EBONY_PCI_CFGREGS_BASE	0x000000020ec00000
-#define EBONY_PCI_CFGA_PLB32	0x0ec00000
-#define EBONY_PCI_CFGD_PLB32	0x0ec00004
-
-#define EBONY_PCI_IO_BASE	0x0000000208000000ULL
-#define EBONY_PCI_IO_SIZE	0x00010000
-#define EBONY_PCI_MEM_OFFSET	0x00000000
-
-#endif				/* __ASM_EBONY_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ep405.c b/arch/ppc/platforms/4xx/ep405.c
deleted file mode 100644
index 5aa295022804..000000000000
--- a/arch/ppc/platforms/4xx/ep405.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Embedded Planet 405GP board
- * http://www.embeddedplanet.com
- *
- * Author: Matthew Locke <mlocke@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/todc.h>
-#include <asm/ocp.h>
-#include <asm/ibm_ocp_pci.h>
-
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-u8 *ep405_bcsr;
-u8 *ep405_nvram;
-
-static struct {
-	u8 cpld_xirq_select;
-	int pci_idsel;
-	int irq;
-} ep405_devtable[] = {
-#ifdef CONFIG_EP405PC
-	{0x07, 0x0E, 25},		/* EP405PC: USB */
-#endif
-};
-
-int __init
-ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	int i;
-
-	/* AFAICT this is only called a few times during PCI setup, so
-	   performance is not critical */
-	for (i = 0; i < ARRAY_SIZE(ep405_devtable); i++) {
-		if (idsel == ep405_devtable[i].pci_idsel)
-			return ep405_devtable[i].irq;
-	}
-	return -1;
-};
-
-void __init
-ep405_setup_arch(void)
-{
-	ppc4xx_setup_arch();
-
-	ibm_ocp_set_emac(0, 0);
-
-	if (__res.bi_nvramsize == 512*1024) {
-		/* FIXME: we should properly handle NVRTCs of different sizes */
-		TODC_INIT(TODC_TYPE_DS1557, ep405_nvram, ep405_nvram, ep405_nvram, 8);
-	}
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
-#ifdef CONFIG_PCI
-	unsigned int bar_response, bar;
-	/*
-	 * Expected PCI mapping:
-	 *
-	 *  PLB addr             PCI memory addr
-	 *  ---------------------       ---------------------
-	 *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
-	 *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
-	 *
-	 *  PLB addr             PCI io addr
-	 *  ---------------------       ---------------------
-	 *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
-	 *
-	 */
-
-	/* Disable region zero first */
-	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
-	/* PLB starting addr, PCI: 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
-	/* PCI start addr, 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
-	/* 512MB range of PLB to PCI */
-	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
-	/* Enable no pre-fetch, enable region */
-	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
-						(PPC405_PCI_UPPER_MEM -
-						 PPC405_PCI_MEM_BASE)) | 0x01));
-
-	/* Disable region one */
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm1ms), 0x00000000);
-
-	/* Disable region two */
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-
-	/* Configure PTM (PCI->PLB) region 1 */
-	out_le32((void *) &(pcip->ptm1la), 0x00000000); /* PLB base address */
-	/* Disable PTM region 2 */
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-		DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
-		    hose->first_busno, PCI_SLOT(hose->first_busno),
-		    PCI_FUNC(hose->first_busno), bar, bar_response);
-	}
-	/* end workaround */
-#endif
-}
-
-void __init
-ep405_map_io(void)
-{
-	bd_t *bip = &__res;
-
-	ppc4xx_map_io();
-
-	ep405_bcsr = ioremap(EP405_BCSR_PADDR, EP405_BCSR_SIZE);
-
-	if (bip->bi_nvramsize > 0) {
-		ep405_nvram = ioremap(EP405_NVRAM_PADDR, bip->bi_nvramsize);
-	}
-}
-
-void __init
-ep405_init_IRQ(void)
-{
-	int i;
-
-	ppc4xx_init_IRQ();
-
-	/* Workaround for a bug in the firmware it incorrectly sets
-	   the IRQ polarities for XIRQ0 and XIRQ1 */
-	mtdcr(DCRN_UIC_PR(DCRN_UIC0_BASE), 0xffffff80); /* set the polarity */
-	mtdcr(DCRN_UIC_SR(DCRN_UIC0_BASE), 0x00000060); /* clear bogus interrupts */
-
-	/* Activate the XIRQs from the CPLD */
-	writeb(0xf0, ep405_bcsr+10);
-
-	/* Set up IRQ routing */
-	for (i = 0; i < ARRAY_SIZE(ep405_devtable); i++) {
-		if ( (ep405_devtable[i].irq >= 25)
-		     && (ep405_devtable[i].irq) <= 31) {
-			writeb(ep405_devtable[i].cpld_xirq_select, ep405_bcsr+5);
-			writeb(ep405_devtable[i].irq - 25, ep405_bcsr+6);
-		}
-	}
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = ep405_setup_arch;
-	ppc_md.setup_io_mappings = ep405_map_io;
-	ppc_md.init_IRQ = ep405_init_IRQ;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-
-	if (__res.bi_nvramsize == 512*1024) {
-		ppc_md.time_init = todc_time_init;
-		ppc_md.set_rtc_time = todc_set_rtc_time;
-		ppc_md.get_rtc_time = todc_get_rtc_time;
-	} else {
-		printk("EP405: NVRTC size is not 512k (not a DS1557).  Not sure what to do with it\n");
-	}
-}
diff --git a/arch/ppc/platforms/4xx/ep405.h b/arch/ppc/platforms/4xx/ep405.h
deleted file mode 100644
index 9814fc431725..000000000000
--- a/arch/ppc/platforms/4xx/ep405.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Embedded Planet 405GP board
- * http://www.embeddedplanet.com
- *
- * Author: Matthew Locke <mlocke@mvista.com>
- *
- * 2000 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_EP405_H__
-#define __ASM_EP405_H__
-
-/* We have a 405GP core */
-#include <platforms/4xx/ibm405gp.h>
-
-#ifndef __ASSEMBLY__
-
-#include <linux/types.h>
-
-typedef struct board_info {
-	unsigned int	 bi_memsize;		/* DRAM installed, in bytes */
-	unsigned char	 bi_enetaddr[6];	/* Local Ethernet MAC address */
-	unsigned int	 bi_intfreq;		/* Processor speed, in Hz */
-	unsigned int	 bi_busfreq;		/* PLB Bus speed, in Hz */
-	unsigned int	 bi_pci_busfreq;	/* PCI Bus speed, in Hz */
-	unsigned int	 bi_nvramsize;		/* Size of the NVRAM/RTC */
-} bd_t;
-
-/* Some 4xx parts use a different timebase frequency from the internal clock.
-*/
-#define bi_tbfreq bi_intfreq
-
-extern u8 *ep405_bcsr;
-extern u8 *ep405_nvram;
-
-/* Map for the BCSR and NVRAM space */
-#define EP405_BCSR_PADDR	((uint)0xf4000000)
-#define EP405_BCSR_SIZE		((uint)16)
-#define EP405_NVRAM_PADDR	((uint)0xf4200000)
-
-/* serial defines */
-#define BASE_BAUD		399193
-
-#define PPC4xx_MACHINE_NAME "Embedded Planet 405GP"
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __ASM_EP405_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm405ep.c b/arch/ppc/platforms/4xx/ibm405ep.c
deleted file mode 100644
index fb3630a1608d..000000000000
--- a/arch/ppc/platforms/4xx/ibm405ep.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * Support for IBM PPC 405EP processors.
- *
- * Author: SAW (IBM), derived from ibmnp405l.c.
- *         Maintained by MontaVista Software <source@mvista.com>
- *
- * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-
-#include <asm/ibm4xx.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-#include <platforms/4xx/ibm405ep.h>
-
-static struct ocp_func_mal_data ibm405ep_mal0_def = {
-	.num_tx_chans	= 4,		/* Number of TX channels */
-	.num_rx_chans	= 2,		/* Number of RX channels */
-	.txeob_irq	= 11,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 12,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 13,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 14,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 10,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_emac_data ibm405ep_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= -1,		/* ZMII device index */
-	.zmii_mux	= 0,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 0,		/* MAL rx channel number */
-	.mal_tx_chan	= 0,		/* MAL tx channel number */
-	.wol_irq	= 9,		/* WOL interrupt number */
-	.mdio_idx	= 0,		/* MDIO via EMAC0 */
-	.tah_idx	= -1,		/* No TAH */
-};
-
-static struct ocp_func_emac_data ibm405ep_emac1_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= -1,		/* ZMII device index */
-	.zmii_mux	= 0,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 1,		/* MAL rx channel number */
-	.mal_tx_chan	= 2,		/* MAL tx channel number */
-	.wol_irq	= 9,		/* WOL interrupt number */
-	.mdio_idx	= 0,		/* MDIO via EMAC0 */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_iic_data ibm405ep_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0xEF600000,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= 0xEF600500,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm405ep_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= 0xEF600700,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm405ep_mal0_def,
-	  .show		= &ocp_show_mal_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= EMAC0_BASE,
-	  .irq		= 15,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm405ep_emac0_def,
-	  .show		= &ocp_show_emac_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 1,
-	  .paddr	= 0xEF600900,
-	  .irq		= 17,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm405ep_emac1_def,
-	  .show		= &ocp_show_emac_data
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xffff7f80,
-	  .triggering	= 0x00000000,
-	  .ext_irq_mask	= 0x0000007f,	/* IRQ0 - IRQ6 */
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibm405ep.h b/arch/ppc/platforms/4xx/ibm405ep.h
deleted file mode 100644
index 3ef20a547080..000000000000
--- a/arch/ppc/platforms/4xx/ibm405ep.h
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * IBM PPC 405EP processor defines.
- *
- * Author: SAW (IBM), derived from ibm405gp.h.
- *         Maintained by MontaVista Software <source@mvista.com>
- *
- * 2003 (c) MontaVista Softare Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM405EP_H__
-#define __ASM_IBM405EP_H__
-
-
-/* ibm405.h at bottom of this file */
-
-/* PCI
- * PCI Bridge config reg definitions
- * see 17-19 of manual
- */
-
-#define PPC405_PCI_CONFIG_ADDR	0xeec00000
-#define PPC405_PCI_CONFIG_DATA	0xeec00004
-
-#define PPC405_PCI_PHY_MEM_BASE	0x80000000	/* hose_a->pci_mem_offset */
-						/* setbat */
-#define PPC405_PCI_MEM_BASE	PPC405_PCI_PHY_MEM_BASE	/* setbat */
-#define PPC405_PCI_PHY_IO_BASE	0xe8000000	/* setbat */
-#define PPC405_PCI_IO_BASE	PPC405_PCI_PHY_IO_BASE	/* setbat */
-
-#define PPC405_PCI_LOWER_MEM	0x80000000	/* hose_a->mem_space.start */
-#define PPC405_PCI_UPPER_MEM	0xBfffffff	/* hose_a->mem_space.end */
-#define PPC405_PCI_LOWER_IO	0x00000000	/* hose_a->io_space.start */
-#define PPC405_PCI_UPPER_IO	0x0000ffff	/* hose_a->io_space.end */
-
-#define PPC405_ISA_IO_BASE	PPC405_PCI_IO_BASE
-
-#define PPC4xx_PCI_IO_PADDR	((uint)PPC405_PCI_PHY_IO_BASE)
-#define PPC4xx_PCI_IO_VADDR	PPC4xx_PCI_IO_PADDR
-#define PPC4xx_PCI_IO_SIZE	((uint)64*1024)
-#define PPC4xx_PCI_CFG_PADDR	((uint)PPC405_PCI_CONFIG_ADDR)
-#define PPC4xx_PCI_CFG_VADDR	PPC4xx_PCI_CFG_PADDR
-#define PPC4xx_PCI_CFG_SIZE	((uint)4*1024)
-#define PPC4xx_PCI_LCFG_PADDR	((uint)0xef400000)
-#define PPC4xx_PCI_LCFG_VADDR	PPC4xx_PCI_LCFG_PADDR
-#define PPC4xx_PCI_LCFG_SIZE	((uint)4*1024)
-#define PPC4xx_ONB_IO_PADDR	((uint)0xef600000)
-#define PPC4xx_ONB_IO_VADDR	PPC4xx_ONB_IO_PADDR
-#define PPC4xx_ONB_IO_SIZE	((uint)4*1024)
-
-/* serial port defines */
-#define RS_TABLE_SIZE	2
-
-#define UART0_INT	0
-#define UART1_INT	1
-
-#define PCIL0_BASE	0xEF400000
-#define UART0_IO_BASE	0xEF600300
-#define UART1_IO_BASE	0xEF600400
-#define EMAC0_BASE	0xEF600800
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i]
-
-#if defined(CONFIG_UART0_TTYS0)
-#define ACTING_UART0_IO_BASE	UART0_IO_BASE
-#define ACTING_UART1_IO_BASE	UART1_IO_BASE
-#define ACTING_UART0_INT	UART0_INT
-#define ACTING_UART1_INT	UART1_INT
-#else
-#define ACTING_UART0_IO_BASE	UART1_IO_BASE
-#define ACTING_UART1_IO_BASE	UART0_IO_BASE
-#define ACTING_UART0_INT	UART1_INT
-#define ACTING_UART1_INT	UART0_INT
-#endif
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, ACTING_UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (u8 *)ACTING_UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_DEBUG_IO_BASE	ACTING_UART0_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-
-/* DCR defines */
-#define DCRN_CPMSR_BASE         0x0BA
-#define DCRN_CPMFR_BASE         0x0B9
-
-#define DCRN_CPC0_PLLMR0_BASE   0x0F0
-#define DCRN_CPC0_BOOT_BASE     0x0F1
-#define DCRN_CPC0_CR1_BASE      0x0F2
-#define DCRN_CPC0_EPRCSR_BASE   0x0F3
-#define DCRN_CPC0_PLLMR1_BASE   0x0F4
-#define DCRN_CPC0_UCR_BASE      0x0F5
-#define DCRN_CPC0_UCR_U0DIV     0x07F
-#define DCRN_CPC0_SRR_BASE      0x0F6
-#define DCRN_CPC0_JTAGID_BASE   0x0F7
-#define DCRN_CPC0_SPARE_BASE    0x0F8
-#define DCRN_CPC0_PCI_BASE      0x0F9
-
-
-#define IBM_CPM_GPT             0x80000000      /* GPT interface */
-#define IBM_CPM_PCI             0x40000000      /* PCI bridge */
-#define IBM_CPM_UIC             0x00010000      /* Universal Int Controller */
-#define IBM_CPM_CPU             0x00008000      /* processor core */
-#define IBM_CPM_EBC             0x00002000      /* EBC controller */
-#define IBM_CPM_SDRAM0          0x00004000      /* SDRAM memory controller */
-#define IBM_CPM_GPIO0           0x00001000      /* General Purpose IO */
-#define IBM_CPM_TMRCLK          0x00000400      /* CPU timers */
-#define IBM_CPM_PLB             0x00000100      /* PLB bus arbiter */
-#define IBM_CPM_OPB             0x00000080      /* PLB to OPB bridge */
-#define IBM_CPM_DMA             0x00000040      /* DMA controller */
-#define IBM_CPM_IIC0            0x00000010      /* IIC interface */
-#define IBM_CPM_UART1           0x00000002      /* serial port 0 */
-#define IBM_CPM_UART0           0x00000001      /* serial port 1 */
-#define DFLT_IBM4xx_PM          ~(IBM_CPM_PCI | IBM_CPM_CPU | IBM_CPM_DMA \
-                                        | IBM_CPM_OPB | IBM_CPM_EBC \
-                                        | IBM_CPM_SDRAM0 | IBM_CPM_PLB \
-                                        | IBM_CPM_UIC | IBM_CPM_TMRCLK)
-#define DCRN_DMA0_BASE          0x100
-#define DCRN_DMA1_BASE          0x108
-#define DCRN_DMA2_BASE          0x110
-#define DCRN_DMA3_BASE          0x118
-#define DCRNCAP_DMA_SG          1       /* have DMA scatter/gather capability */
-#define DCRN_DMASR_BASE         0x120
-#define DCRN_EBC_BASE           0x012
-#define DCRN_DCP0_BASE          0x014
-#define DCRN_MAL_BASE           0x180
-#define DCRN_OCM0_BASE          0x018
-#define DCRN_PLB0_BASE          0x084
-#define DCRN_PLLMR_BASE         0x0B0
-#define DCRN_POB0_BASE          0x0A0
-#define DCRN_SDRAM0_BASE        0x010
-#define DCRN_UIC0_BASE          0x0C0
-#define UIC0 DCRN_UIC0_BASE
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBM405EP_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm405gp.c b/arch/ppc/platforms/4xx/ibm405gp.c
deleted file mode 100644
index 2ac67a2f0ba6..000000000000
--- a/arch/ppc/platforms/4xx/ibm405gp.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- *
- *    Copyright 2000-2001 MontaVista Software Inc.
- *      Original author: Armin Kuster akuster@mvista.com
- *
- *    Module name: ibm405gp.c
- *
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <platforms/4xx/ibm405gp.h>
-#include <asm/ibm4xx.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ibm405gp_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= -1,		/* ZMII device index */
-	.zmii_mux	= 0,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 0,		/* MAL rx channel number */
-	.mal_tx_chan	= 0,		/* MAL tx channel number */
-	.wol_irq	= 9,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm405gp_mal0_def = {
-	.num_tx_chans	= 1,		/* Number of TX channels */
-	.num_rx_chans	= 1,		/* Number of RX channels */
-	.txeob_irq	= 11,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 12,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 13,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 14,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 10,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm405gp_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0xEF600000,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= 0xEF600500,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm405gp_iic0_def,
-	  .show		= &ocp_show_iic_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= 0xEF600700,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm405gp_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= EMAC0_BASE,
-	  .irq		= 15,
-	  .pm		= IBM_CPM_EMAC0,
-	  .additions	= &ibm405gp_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xffffff80,
-	  .triggering	= 0x10000000,
-	  .ext_irq_mask	= 0x0000007f,	/* IRQ0 - IRQ6 */
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibm405gp.h b/arch/ppc/platforms/4xx/ibm405gp.h
deleted file mode 100644
index 9f15e5518719..000000000000
--- a/arch/ppc/platforms/4xx/ibm405gp.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Author: Armin Kuster akuster@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM405GP_H__
-#define __ASM_IBM405GP_H__
-
-
-/* ibm405.h at bottom of this file */
-
-/* PCI
- * PCI Bridge config reg definitions
- * see 17-19 of manual
- */
-
-#define PPC405_PCI_CONFIG_ADDR	0xeec00000
-#define PPC405_PCI_CONFIG_DATA	0xeec00004
-
-#define PPC405_PCI_PHY_MEM_BASE	0x80000000	/* hose_a->pci_mem_offset */
-						/* setbat */
-#define PPC405_PCI_MEM_BASE	PPC405_PCI_PHY_MEM_BASE	/* setbat */
-#define PPC405_PCI_PHY_IO_BASE	0xe8000000	/* setbat */
-#define PPC405_PCI_IO_BASE	PPC405_PCI_PHY_IO_BASE	/* setbat */
-
-#define PPC405_PCI_LOWER_MEM	0x80000000	/* hose_a->mem_space.start */
-#define PPC405_PCI_UPPER_MEM	0xBfffffff	/* hose_a->mem_space.end */
-#define PPC405_PCI_LOWER_IO	0x00000000	/* hose_a->io_space.start */
-#define PPC405_PCI_UPPER_IO	0x0000ffff	/* hose_a->io_space.end */
-
-#define PPC405_ISA_IO_BASE	PPC405_PCI_IO_BASE
-
-#define PPC4xx_PCI_IO_PADDR	((uint)PPC405_PCI_PHY_IO_BASE)
-#define PPC4xx_PCI_IO_VADDR	PPC4xx_PCI_IO_PADDR
-#define PPC4xx_PCI_IO_SIZE	((uint)64*1024)
-#define PPC4xx_PCI_CFG_PADDR	((uint)PPC405_PCI_CONFIG_ADDR)
-#define PPC4xx_PCI_CFG_VADDR	PPC4xx_PCI_CFG_PADDR
-#define PPC4xx_PCI_CFG_SIZE	((uint)4*1024)
-#define PPC4xx_PCI_LCFG_PADDR	((uint)0xef400000)
-#define PPC4xx_PCI_LCFG_VADDR	PPC4xx_PCI_LCFG_PADDR
-#define PPC4xx_PCI_LCFG_SIZE	((uint)4*1024)
-#define PPC4xx_ONB_IO_PADDR	((uint)0xef600000)
-#define PPC4xx_ONB_IO_VADDR	PPC4xx_ONB_IO_PADDR
-#define PPC4xx_ONB_IO_SIZE	((uint)4*1024)
-
-/* serial port defines */
-#define RS_TABLE_SIZE	2
-
-#define UART0_INT	0
-#define UART1_INT	1
-
-#define PCIL0_BASE	0xEF400000
-#define UART0_IO_BASE	0xEF600300
-#define UART1_IO_BASE	0xEF600400
-#define EMAC0_BASE	0xEF600800
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (u8 *)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART1_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(1)		\
-	STD_UART_OP(0)
-#endif
-
-/* DCR defines */
-#define DCRN_CHCR_BASE		0x0B1
-#define DCRN_CHPSR_BASE		0x0B4
-#define DCRN_CPMSR_BASE		0x0B8
-#define DCRN_CPMFR_BASE		0x0BA
-
-#define CHR0_U0EC	0x00000080	/* Select external clock for UART0 */
-#define CHR0_U1EC	0x00000040	/* Select external clock for UART1 */
-#define CHR0_UDIV	0x0000003E	/* UART internal clock divisor */
-#define CHR1_CETE	0x00800000	/* CPU external timer enable */
-
-#define DCRN_CHPSR_BASE         0x0B4
-#define  PSR_PLL_FWD_MASK        0xC0000000
-#define  PSR_PLL_FDBACK_MASK     0x30000000
-#define  PSR_PLL_TUNING_MASK     0x0E000000
-#define  PSR_PLB_CPU_MASK        0x01800000
-#define  PSR_OPB_PLB_MASK        0x00600000
-#define  PSR_PCI_PLB_MASK        0x00180000
-#define  PSR_EB_PLB_MASK         0x00060000
-#define  PSR_ROM_WIDTH_MASK      0x00018000
-#define  PSR_ROM_LOC             0x00004000
-#define  PSR_PCI_ASYNC_EN        0x00001000
-#define  PSR_PCI_ARBIT_EN        0x00000400
-
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_PCI		0x40000000	/* PCI bridge */
-#define IBM_CPM_CPU		0x20000000	/* processor core */
-#define IBM_CPM_DMA		0x10000000	/* DMA controller */
-#define IBM_CPM_OPB		0x08000000	/* PLB to OPB bridge */
-#define IBM_CPM_DCP		0x04000000	/* CodePack */
-#define IBM_CPM_EBC		0x02000000	/* ROM/SRAM peripheral controller */
-#define IBM_CPM_SDRAM0		0x01000000	/* SDRAM memory controller */
-#define IBM_CPM_PLB		0x00800000	/* PLB bus arbiter */
-#define IBM_CPM_GPIO0		0x00400000	/* General Purpose IO (??) */
-#define IBM_CPM_UART0		0x00200000	/* serial port 0 */
-#define IBM_CPM_UART1		0x00100000	/* serial port 1 */
-#define IBM_CPM_UIC		0x00080000	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00040000	/* CPU timers */
-#define IBM_CPM_EMAC0		0x00020000	/* on-chip ethernet MM unit */
-#define DFLT_IBM4xx_PM		~(IBM_CPM_PCI | IBM_CPM_CPU | IBM_CPM_DMA \
-					| IBM_CPM_OPB | IBM_CPM_EBC \
-					| IBM_CPM_SDRAM0 | IBM_CPM_PLB \
-					| IBM_CPM_UIC | IBM_CPM_TMRCLK)
-
-#define DCRN_DMA0_BASE		0x100
-#define DCRN_DMA1_BASE		0x108
-#define DCRN_DMA2_BASE		0x110
-#define DCRN_DMA3_BASE		0x118
-#define DCRNCAP_DMA_SG		1	/* have DMA scatter/gather capability */
-#define DCRN_DMASR_BASE		0x120
-#define DCRN_EBC_BASE		0x012
-#define DCRN_DCP0_BASE		0x014
-#define DCRN_MAL_BASE		0x180
-#define DCRN_OCM0_BASE		0x018
-#define DCRN_PLB0_BASE		0x084
-#define DCRN_PLLMR_BASE		0x0B0
-#define DCRN_POB0_BASE		0x0A0
-#define DCRN_SDRAM0_BASE	0x010
-#define DCRN_UIC0_BASE		0x0C0
-#define UIC0 DCRN_UIC0_BASE
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBM405GP_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm405gpr.c b/arch/ppc/platforms/4xx/ibm405gpr.c
deleted file mode 100644
index 9f4dacffdbb3..000000000000
--- a/arch/ppc/platforms/4xx/ibm405gpr.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <platforms/4xx/ibm405gpr.h>
-#include <asm/ibm4xx.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ibm405gpr_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= -1,		/* ZMII device index */
-	.zmii_mux	= 0,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 0,		/* MAL rx channel number */
-	.mal_tx_chan	= 0,		/* MAL tx channel number */
-	.wol_irq	= 9,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm405gpr_mal0_def = {
-	.num_tx_chans	= 1,		/* Number of TX channels */
-	.num_rx_chans	= 1,		/* Number of RX channels */
-	.txeob_irq	= 11,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 12,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 13,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 14,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 10,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm405gpr_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0xEF600000,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= 0xEF600500,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm405gpr_iic0_def,
-	  .show		= &ocp_show_iic_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= 0xEF600700,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm405gpr_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= EMAC0_BASE,
-	  .irq		= 15,
-	  .pm		= IBM_CPM_EMAC0,
-	  .additions	= &ibm405gpr_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xffffe000,
-	  .triggering	= 0x10000000,
-	  .ext_irq_mask	= 0x00001fff,	/* IRQ7 - IRQ12, IRQ0 - IRQ6 */
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibm405gpr.h b/arch/ppc/platforms/4xx/ibm405gpr.h
deleted file mode 100644
index 9e01f1515de3..000000000000
--- a/arch/ppc/platforms/4xx/ibm405gpr.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBM405GPR_H__
-#define __ASM_IBM405GPR_H__
-
-
-/* ibm405.h at bottom of this file */
-
-/* PCI
- * PCI Bridge config reg definitions
- * see 17-19 of manual
- */
-
-#define PPC405_PCI_CONFIG_ADDR	0xeec00000
-#define PPC405_PCI_CONFIG_DATA	0xeec00004
-
-#define PPC405_PCI_PHY_MEM_BASE	0x80000000	/* hose_a->pci_mem_offset */
-						/* setbat */
-#define PPC405_PCI_MEM_BASE	PPC405_PCI_PHY_MEM_BASE	/* setbat */
-#define PPC405_PCI_PHY_IO_BASE	0xe8000000	/* setbat */
-#define PPC405_PCI_IO_BASE	PPC405_PCI_PHY_IO_BASE	/* setbat */
-
-#define PPC405_PCI_LOWER_MEM	0x80000000	/* hose_a->mem_space.start */
-#define PPC405_PCI_UPPER_MEM	0xBfffffff	/* hose_a->mem_space.end */
-#define PPC405_PCI_LOWER_IO	0x00000000	/* hose_a->io_space.start */
-#define PPC405_PCI_UPPER_IO	0x0000ffff	/* hose_a->io_space.end */
-
-#define PPC405_ISA_IO_BASE	PPC405_PCI_IO_BASE
-
-#define PPC4xx_PCI_IO_PADDR	((uint)PPC405_PCI_PHY_IO_BASE)
-#define PPC4xx_PCI_IO_VADDR	PPC4xx_PCI_IO_PADDR
-#define PPC4xx_PCI_IO_SIZE	((uint)64*1024)
-#define PPC4xx_PCI_CFG_PADDR	((uint)PPC405_PCI_CONFIG_ADDR)
-#define PPC4xx_PCI_CFG_VADDR	PPC4xx_PCI_CFG_PADDR
-#define PPC4xx_PCI_CFG_SIZE	((uint)4*1024)
-#define PPC4xx_PCI_LCFG_PADDR	((uint)0xef400000)
-#define PPC4xx_PCI_LCFG_VADDR	PPC4xx_PCI_LCFG_PADDR
-#define PPC4xx_PCI_LCFG_SIZE	((uint)4*1024)
-#define PPC4xx_ONB_IO_PADDR	((uint)0xef600000)
-#define PPC4xx_ONB_IO_VADDR	PPC4xx_ONB_IO_PADDR
-#define PPC4xx_ONB_IO_SIZE	((uint)4*1024)
-
-/* serial port defines */
-#define RS_TABLE_SIZE	2
-
-#define UART0_INT	0
-#define UART1_INT	1
-
-#define PCIL0_BASE	0xEF400000
-#define UART0_IO_BASE	0xEF600300
-#define UART1_IO_BASE	0xEF600400
-#define EMAC0_BASE	0xEF600800
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (u8 *)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART1_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(1)		\
-	STD_UART_OP(0)
-#endif
-
-/* DCR defines */
-#define DCRN_CHCR_BASE		0x0B1
-#define DCRN_CHPSR_BASE		0x0B4
-#define DCRN_CPMSR_BASE		0x0B8
-#define DCRN_CPMFR_BASE		0x0BA
-
-#define CHR0_U0EC	0x00000080	/* Select external clock for UART0 */
-#define CHR0_U1EC	0x00000040	/* Select external clock for UART1 */
-#define CHR0_UDIV	0x0000003E	/* UART internal clock divisor */
-#define CHR1_CETE	0x00800000	/* CPU external timer enable */
-
-#define DCRN_CHPSR_BASE         0x0B4
-#define  PSR_PLL_FWD_MASK        0xC0000000
-#define  PSR_PLL_FDBACK_MASK     0x30000000
-#define  PSR_PLL_TUNING_MASK     0x0E000000
-#define  PSR_PLB_CPU_MASK        0x01800000
-#define  PSR_OPB_PLB_MASK        0x00600000
-#define  PSR_PCI_PLB_MASK        0x00180000
-#define  PSR_EB_PLB_MASK         0x00060000
-#define  PSR_ROM_WIDTH_MASK      0x00018000
-#define  PSR_ROM_LOC             0x00004000
-#define  PSR_PCI_ASYNC_EN        0x00001000
-#define  PSR_PCI_ARBIT_EN        0x00000400
-
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_PCI		0x40000000	/* PCI bridge */
-#define IBM_CPM_CPU		0x20000000	/* processor core */
-#define IBM_CPM_DMA		0x10000000	/* DMA controller */
-#define IBM_CPM_OPB		0x08000000	/* PLB to OPB bridge */
-#define IBM_CPM_DCP		0x04000000	/* CodePack */
-#define IBM_CPM_EBC		0x02000000	/* ROM/SRAM peripheral controller */
-#define IBM_CPM_SDRAM0		0x01000000	/* SDRAM memory controller */
-#define IBM_CPM_PLB		0x00800000	/* PLB bus arbiter */
-#define IBM_CPM_GPIO0		0x00400000	/* General Purpose IO (??) */
-#define IBM_CPM_UART0		0x00200000	/* serial port 0 */
-#define IBM_CPM_UART1		0x00100000	/* serial port 1 */
-#define IBM_CPM_UIC		0x00080000	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00040000	/* CPU timers */
-#define IBM_CPM_EMAC0		0x00020000	/* on-chip ethernet MM unit */
-#define DFLT_IBM4xx_PM		~(IBM_CPM_PCI | IBM_CPM_CPU | IBM_CPM_DMA \
-					| IBM_CPM_OPB | IBM_CPM_EBC \
-					| IBM_CPM_SDRAM0 | IBM_CPM_PLB \
-					| IBM_CPM_UIC | IBM_CPM_TMRCLK)
-
-#define DCRN_DMA0_BASE		0x100
-#define DCRN_DMA1_BASE		0x108
-#define DCRN_DMA2_BASE		0x110
-#define DCRN_DMA3_BASE		0x118
-#define DCRNCAP_DMA_SG		1	/* have DMA scatter/gather capability */
-#define DCRN_DMASR_BASE		0x120
-#define DCRN_EBC_BASE		0x012
-#define DCRN_DCP0_BASE		0x014
-#define DCRN_MAL_BASE		0x180
-#define DCRN_OCM0_BASE		0x018
-#define DCRN_PLB0_BASE		0x084
-#define DCRN_PLLMR_BASE		0x0B0
-#define DCRN_POB0_BASE		0x0A0
-#define DCRN_SDRAM0_BASE	0x010
-#define DCRN_UIC0_BASE		0x0C0
-#define UIC0 DCRN_UIC0_BASE
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBM405GPR_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm440ep.c b/arch/ppc/platforms/4xx/ibm440ep.c
deleted file mode 100644
index 0de91532aabb..000000000000
--- a/arch/ppc/platforms/4xx/ibm440ep.c
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * PPC440EP I/O descriptions
- *
- * Wade Farnsworth <wfarnsworth@mvista.com>
- * Copyright 2004 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <platforms/4xx/ibm440ep.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ibm440ep_emac0_def = {
-	.rgmii_idx	= -1,           /* No RGMII */
-	.rgmii_mux	= -1,           /* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 0,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 0,            /* MAL rx channel number */
-	.mal_tx_chan    = 0,            /* MAL tx channel number */
-	.wol_irq        = 61,		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,           /* No TAH */
-};
-
-static struct ocp_func_emac_data ibm440ep_emac1_def = {
-	.rgmii_idx	= -1,           /* No RGMII */
-	.rgmii_mux	= -1,           /* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 1,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 1,            /* MAL rx channel number */
-	.mal_tx_chan    = 2,            /* MAL tx channel number */
-	.wol_irq        = 63,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,           /* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm440ep_mal0_def = {
-	.num_tx_chans   = 4,  		/* Number of TX channels */
-	.num_rx_chans   = 2,    	/* Number of RX channels */
-	.txeob_irq	= 10,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 11,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 33,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 34,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 32,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm440ep_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ibm440ep_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0x0EF600000ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= PPC440EP_UART0_ADDR,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= PPC440EP_UART1_ADDR,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 2,
-	  .paddr	= PPC440EP_UART2_ADDR,
-	  .irq		= UART2_INT,
-	  .pm		= IBM_CPM_UART2,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 3,
-	  .paddr	= PPC440EP_UART3_ADDR,
-	  .irq		= UART3_INT,
-	  .pm		= IBM_CPM_UART3,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 0,
-	  .paddr	= 0x0EF600700ULL,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm440ep_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 1,
-	  .paddr	= 0x0EF600800ULL,
-	  .irq		= 7,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ibm440ep_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 0,
-	  .paddr	= 0x0EF600B00ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 1,
-	  .paddr	= 0x0EF600C00ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440ep_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= 0x0EF600E00ULL,
-	  .irq		= 60,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440ep_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 1,
-	  .paddr	= 0x0EF600F00ULL,
-	  .irq		= 62,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440ep_emac1_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_ZMII,
-	  .paddr	= 0x0EF600D00ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity	= 0xffbffe03,
-	  .triggering   = 0x00000000,
-	  .ext_irq_mask = 0x000001fc,	/* IRQ0 - IRQ6 */
-	},
-	{ .polarity	= 0xffffc6af,
-	  .triggering	= 0x06000140,
-	  .ext_irq_mask = 0x00003800,	/* IRQ7 - IRQ9 */
-	},
-};
-
-static struct resource usb_gadget_resources[] = {
-	[0] = {
-		.start	= 0x050000100ULL,
-		.end 	= 0x05000017FULL,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 55,
-		.end	= 55,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 dma_mask = 0xffffffffULL;
-
-static struct platform_device usb_gadget_device = {
-	.name		= "musbhsfc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(usb_gadget_resources),
-	.resource       = usb_gadget_resources,
-	.dev		= {
-		.dma_mask = &dma_mask,
-		.coherent_dma_mask = 0xffffffffULL,
-	}
-};
-
-static struct platform_device *ibm440ep_devs[] __initdata = {
-	&usb_gadget_device,
-};
-
-static int __init
-ibm440ep_platform_add_devices(void)
-{
-	return platform_add_devices(ibm440ep_devs, ARRAY_SIZE(ibm440ep_devs));
-}
-arch_initcall(ibm440ep_platform_add_devices);
-
diff --git a/arch/ppc/platforms/4xx/ibm440ep.h b/arch/ppc/platforms/4xx/ibm440ep.h
deleted file mode 100644
index d92572727d20..000000000000
--- a/arch/ppc/platforms/4xx/ibm440ep.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * PPC440EP definitions
- *
- * Wade Farnsworth <wfarnsworth@mvista.com>
- *
- * Copyright 2002 Roland Dreier
- * Copyright 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __PPC_PLATFORMS_IBM440EP_H
-#define __PPC_PLATFORMS_IBM440EP_H
-
-#include <asm/ibm44x.h>
-
-/* UART */
-#define PPC440EP_UART0_ADDR		0x0EF600300
-#define PPC440EP_UART1_ADDR		0x0EF600400
-#define PPC440EP_UART2_ADDR		0x0EF600500
-#define PPC440EP_UART3_ADDR		0x0EF600600
-#define UART0_INT			0
-#define UART1_INT			1
-#define UART2_INT			3
-#define UART3_INT			4
-
-/* Clock and Power Management */
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
-#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
-#define IBM_CPM_USB1H		0x08000000	/* USB 1.1 Host */
-#define IBM_CPM_FPU		0x04000000	/* floating point unit */
-#define IBM_CPM_CPU		0x02000000	/* processor core */
-#define IBM_CPM_DMA		0x01000000	/* DMA controller */
-#define IBM_CPM_BGO		0x00800000	/* PLB to OPB bus arbiter */
-#define IBM_CPM_BGI		0x00400000	/* OPB to PLB bridge */
-#define IBM_CPM_EBC		0x00200000	/* External Bus Controller */
-#define IBM_CPM_EBM		0x00100000	/* Ext Bus Master Interface */
-#define IBM_CPM_DMC		0x00080000	/* SDRAM peripheral controller */
-#define IBM_CPM_PLB4		0x00040000	/* PLB4 bus arbiter */
-#define IBM_CPM_PLB4x3		0x00020000	/* PLB4 to PLB3 bridge controller */
-#define IBM_CPM_PLB3x4		0x00010000	/* PLB3 to PLB4 bridge controller */
-#define IBM_CPM_PLB3		0x00008000	/* PLB3 bus arbiter */
-#define IBM_CPM_PPM		0x00002000	/* PLB Performance Monitor */
-#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
-#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
-#define IBM_CPM_GPT		0x00000400	/* General Purpose Timers  */
-#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
-#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
-#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
-#define IBM_CPM_EMAC0		0x00000020	/* ethernet port 0 */
-#define IBM_CPM_EMAC1		0x00000010	/* ethernet port 1 */
-#define IBM_CPM_UART2		0x00000008	/* serial port 2 */
-#define IBM_CPM_UART3		0x00000004	/* serial port 3 */
-#define IBM_CPM_USB2D		0x00000002	/* USB 2.0 Device */
-#define IBM_CPM_USB2H		0x00000001	/* USB 2.0 Host */
-
-#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU \
-				| IBM_CPM_EBC | IBM_CPM_BGO | IBM_CPM_FPU \
-				| IBM_CPM_EBM | IBM_CPM_PLB4 | IBM_CPM_3x4 \
-				| IBM_CPM_PLB3 | IBM_CPM_PLB4x3 \
-				| IBM_CPM_EMAC0 | IBM_CPM_TMRCLK \
-				| IBM_CPM_DMA | IBM_CPM_PCI | IBM_CPM_EMAC1)
-
-
-#endif /* __PPC_PLATFORMS_IBM440EP_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm440gp.c b/arch/ppc/platforms/4xx/ibm440gp.c
deleted file mode 100644
index b67a72e5c6fe..000000000000
--- a/arch/ppc/platforms/4xx/ibm440gp.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * PPC440GP I/O descriptions
- *
- * Matt Porter <mporter@mvista.com>
- * Copyright 2002-2004 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <platforms/4xx/ibm440gp.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ibm440gp_emac0_def = {
-	.rgmii_idx	= -1,           /* No RGMII */
-	.rgmii_mux	= -1,           /* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 0,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 0,            /* MAL rx channel number */
-	.mal_tx_chan    = 0,            /* MAL tx channel number */
-	.wol_irq        = 61,		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,           /* No TAH */
-};
-
-static struct ocp_func_emac_data ibm440gp_emac1_def = {
-	.rgmii_idx	= -1,           /* No RGMII */
-	.rgmii_mux	= -1,           /* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 1,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 1,            /* MAL rx channel number */
-	.mal_tx_chan    = 2,            /* MAL tx channel number */
-	.wol_irq        = 63,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,           /* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm440gp_mal0_def = {
-	.num_tx_chans   = 4,  		/* Number of TX channels */
-	.num_rx_chans   = 2,    	/* Number of RX channels */
-	.txeob_irq	= 10,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 11,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 33,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 34,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 32,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm440gp_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ibm440gp_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000000ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= PPC440GP_UART0_ADDR,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= PPC440GP_UART1_ADDR,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000400ULL,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm440gp_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 1,
-	  .paddr	= 0x0000000140000500ULL,
-	  .irq		= 3,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ibm440gp_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000700ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gp_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000800ULL,
-	  .irq		= 60,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gp_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 1,
-	  .paddr	= 0x0000000140000900ULL,
-	  .irq		= 62,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gp_emac1_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_ZMII,
-	  .paddr	= 0x0000000140000780ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xfffffe03,
-	  .triggering	= 0x01c00000,
-	  .ext_irq_mask	= 0x000001fc,	/* IRQ0 - IRQ6 */
-	},
-	{ .polarity 	= 0xffffc0ff,
-	  .triggering	= 0x00ff8000,
-	  .ext_irq_mask	= 0x00003f00,	/* IRQ7 - IRQ12 */
-	},
-};
diff --git a/arch/ppc/platforms/4xx/ibm440gp.h b/arch/ppc/platforms/4xx/ibm440gp.h
deleted file mode 100644
index 391c90e1f5ea..000000000000
--- a/arch/ppc/platforms/4xx/ibm440gp.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * PPC440GP definitions
- *
- * Roland Dreier <roland@digitalvampire.org>
- *
- * Copyright 2002 Roland Dreier
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * This file contains code that was originally in the files ibm44x.h
- * and ebony.h, which were written by Matt Porter of MontaVista Software Inc.
- */
-
-#ifdef __KERNEL__
-#ifndef __PPC_PLATFORMS_IBM440GP_H
-#define __PPC_PLATFORMS_IBM440GP_H
-
-
-/* UART */
-#define PPC440GP_UART0_ADDR	0x0000000140000200ULL
-#define PPC440GP_UART1_ADDR	0x0000000140000300ULL
-#define UART0_INT		0
-#define UART1_INT		1
-
-/* Clock and Power Management */
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
-#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
-#define IBM_CPM_CPU		0x02000000	/* processor core */
-#define IBM_CPM_DMA		0x01000000	/* DMA controller */
-#define IBM_CPM_BGO		0x00800000	/* PLB to OPB bus arbiter */
-#define IBM_CPM_BGI		0x00400000	/* OPB to PLB bridge */
-#define IBM_CPM_EBC		0x00200000	/* External Bux Controller */
-#define IBM_CPM_EBM		0x00100000	/* Ext Bus Master Interface */
-#define IBM_CPM_DMC		0x00080000	/* SDRAM peripheral controller */
-#define IBM_CPM_PLB		0x00040000	/* PLB bus arbiter */
-#define IBM_CPM_SRAM		0x00020000	/* SRAM memory controller */
-#define IBM_CPM_PPM		0x00002000	/* PLB Performance Monitor */
-#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
-#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
-#define IBM_CPM_GPT		0x00000400	/* General Purpose Timers  */
-#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
-#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
-#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
-
-#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
-				| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
-				| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
-				| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI)
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	2
-
-#include <asm/ibm44x.h>
-#include <syslib/ibm440gp_common.h>
-
-#endif /* __PPC_PLATFORMS_IBM440GP_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm440gx.c b/arch/ppc/platforms/4xx/ibm440gx.c
deleted file mode 100644
index 685abffcb6ce..000000000000
--- a/arch/ppc/platforms/4xx/ibm440gx.c
+++ /dev/null
@@ -1,231 +0,0 @@
-/*
- * PPC440GX I/O descriptions
- *
- * Matt Porter <mporter@mvista.com>
- * Copyright 2002-2004 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <platforms/4xx/ibm440gx.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ibm440gx_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 0,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 0,            /* MAL rx channel number */
-	.mal_tx_chan    = 0,            /* MAL tx channel number */
-	.wol_irq        = 61,   	/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-
-static struct ocp_func_emac_data ibm440gx_emac1_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 1,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 1,            /* MAL rx channel number */
-	.mal_tx_chan    = 1,            /* MAL tx channel number */
-	.wol_irq        = 63,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-
-static struct ocp_func_emac_data ibm440gx_emac2_def = {
-	.rgmii_idx	= 0,		/* RGMII device index */
-	.rgmii_mux	= 0,		/* RGMII input of this EMAC */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 2,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 2,            /* MAL rx channel number */
-	.mal_tx_chan    = 2,            /* MAL tx channel number */
-	.wol_irq        = 65,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= 0,		/* TAH device index */
-};
-
-static struct ocp_func_emac_data ibm440gx_emac3_def = {
-	.rgmii_idx	= 0,		/* RGMII device index */
-	.rgmii_mux	= 1,		/* RGMII input of this EMAC */
-	.zmii_idx       = 0,            /* ZMII device index */
-	.zmii_mux       = 3,            /* ZMII input of this EMAC */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 3,            /* MAL rx channel number */
-	.mal_tx_chan    = 3,            /* MAL tx channel number */
-	.wol_irq        = 67,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= 1,		/* TAH device index */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm440gx_mal0_def = {
-	.num_tx_chans   = 4,    	/* Number of TX channels */
-	.num_rx_chans   = 4,    	/* Number of RX channels */
-	.txeob_irq	= 10,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 11,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 33,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 34,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 32,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm440gx_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ibm440gx_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000000ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= PPC440GX_UART0_ADDR,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= PPC440GX_UART1_ADDR,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000400ULL,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm440gx_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 1,
-	  .paddr	= 0x0000000140000500ULL,
-	  .irq		= 3,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ibm440gx_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000700ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gx_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000800ULL,
-	  .irq		= 60,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gx_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 1,
-	  .paddr	= 0x0000000140000900ULL,
-	  .irq		= 62,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gx_emac1_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 2,
-	  .paddr	= 0x0000000140000C00ULL,
-	  .irq		= 64,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gx_emac2_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 3,
-	  .paddr	= 0x0000000140000E00ULL,
-	  .irq		= 66,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440gx_emac3_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_RGMII,
-	  .paddr	= 0x0000000140000790ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_ZMII,
-	  .paddr	= 0x0000000140000780ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_TAH,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000b50ULL,
-	  .irq		= 68,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_TAH,
-	  .index	= 1,
-	  .paddr	= 0x0000000140000d50ULL,
-	  .irq		= 69,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xfffffe03,
-	  .triggering	= 0x01c00000,
-	  .ext_irq_mask	= 0x000001fc,	/* IRQ0 - IRQ6 */
-	},
-	{ .polarity 	= 0xffffc0ff,
-	  .triggering	= 0x00ff8000,
-	  .ext_irq_mask	= 0x00003f00,	/* IRQ7 - IRQ12 */
-	},
-	{ .polarity 	= 0xffff83ff,
-	  .triggering	= 0x000f83c0,
-	  .ext_irq_mask	= 0x00007c00,	/* IRQ13 - IRQ17 */
-	},
-};
diff --git a/arch/ppc/platforms/4xx/ibm440gx.h b/arch/ppc/platforms/4xx/ibm440gx.h
deleted file mode 100644
index 599c4289b9c2..000000000000
--- a/arch/ppc/platforms/4xx/ibm440gx.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * PPC440GX definitions
- *
- * Matt Porter <mporter@mvista.com>
- *
- * Copyright 2002 Roland Dreier
- * Copyright 2003 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __PPC_PLATFORMS_IBM440GX_H
-#define __PPC_PLATFORMS_IBM440GX_H
-
-
-#include <asm/ibm44x.h>
-
-/* UART */
-#define PPC440GX_UART0_ADDR	0x0000000140000200ULL
-#define PPC440GX_UART1_ADDR	0x0000000140000300ULL
-#define UART0_INT		0
-#define UART1_INT		1
-
-/* Clock and Power Management */
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
-#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
-#define IBM_CPM_RGMII		0x10000000	/* RGMII */
-#define IBM_CPM_TAHOE0		0x08000000	/* TAHOE 0 */
-#define IBM_CPM_TAHOE1		0x04000000	/* TAHOE 1 */
-#define IBM_CPM_CPU		    0x02000000	/* processor core */
-#define IBM_CPM_DMA		    0x01000000	/* DMA controller */
-#define IBM_CPM_BGO		    0x00800000	/* PLB to OPB bus arbiter */
-#define IBM_CPM_BGI		    0x00400000	/* OPB to PLB bridge */
-#define IBM_CPM_EBC		    0x00200000	/* External Bux Controller */
-#define IBM_CPM_EBM		    0x00100000	/* Ext Bus Master Interface */
-#define IBM_CPM_DMC		    0x00080000	/* SDRAM peripheral controller */
-#define IBM_CPM_PLB		    0x00040000	/* PLB bus arbiter */
-#define IBM_CPM_SRAM		0x00020000	/* SRAM memory controller */
-#define IBM_CPM_PPM		    0x00002000	/* PLB Performance Monitor */
-#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
-#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
-#define IBM_CPM_GPT		    0x00000400	/* General Purpose Timers  */
-#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
-#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
-#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
-#define IBM_CPM_EMAC0  		0x00000020	/* EMAC 0     */
-#define IBM_CPM_EMAC1  		0x00000010	/* EMAC 1     */
-#define IBM_CPM_EMAC2  		0x00000008	/* EMAC 2     */
-#define IBM_CPM_EMAC3  		0x00000004	/* EMAC 3     */
-
-#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
-				| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
-				| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
-				| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \
-				| IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \
-				| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \
-			  	| IBM_CPM_EMAC2 | IBM_CPM_EMAC3 )
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	2
-
-#endif /* __PPC_PLATFORMS_IBM440GX_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibm440sp.c b/arch/ppc/platforms/4xx/ibm440sp.c
deleted file mode 100644
index de8f7ac5623c..000000000000
--- a/arch/ppc/platforms/4xx/ibm440sp.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * PPC440SP I/O descriptions
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <platforms/4xx/ibm440sp.h>
-#include <asm/ocp.h>
-
-static struct ocp_func_emac_data ibm440sp_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx       = -1,           /* No ZMII */
-	.zmii_mux       = -1,           /* No ZMII */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 0,            /* MAL rx channel number */
-	.mal_tx_chan    = 0,            /* MAL tx channel number */
-	.wol_irq        = 61,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibm440sp_mal0_def = {
-	.num_tx_chans   = 1,    	/* Number of TX channels */
-	.num_rx_chans   = 1,    	/* Number of RX channels */
-	.txeob_irq	= 38,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 39,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 34,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 35,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 33,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibm440sp_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ibm440sp_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0x0000000140000000ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= PPC440SP_UART0_ADDR,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= PPC440SP_UART1_ADDR,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 2,
-	  .paddr	= PPC440SP_UART2_ADDR,
-	  .irq		= UART2_INT,
-	  .pm		= IBM_CPM_UART2,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 0,
-	  .paddr	= 0x00000001f0000400ULL,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibm440sp_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 1,
-	  .paddr	= 0x00000001f0000500ULL,
-	  .irq		= 3,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ibm440sp_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 0,
-	  .paddr	= 0x00000001f0000700ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440sp_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= 0x00000001f0000800ULL,
-	  .irq		= 60,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibm440sp_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibm440sp.h b/arch/ppc/platforms/4xx/ibm440sp.h
deleted file mode 100644
index 2978682f1720..000000000000
--- a/arch/ppc/platforms/4xx/ibm440sp.h
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * PPC440SP definitions
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2004-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __PPC_PLATFORMS_IBM440SP_H
-#define __PPC_PLATFORMS_IBM440SP_H
-
-
-#include <asm/ibm44x.h>
-
-/* UART */
-#define PPC440SP_UART0_ADDR	0x00000001f0000200ULL
-#define PPC440SP_UART1_ADDR	0x00000001f0000300ULL
-#define PPC440SP_UART2_ADDR	0x00000001f0000600ULL
-#define UART0_INT		0
-#define UART1_INT		1
-#define UART2_INT		2
-
-/* Clock and Power Management */
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
-#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
-#define IBM_CPM_CPU		    0x02000000	/* processor core */
-#define IBM_CPM_DMA		    0x01000000	/* DMA controller */
-#define IBM_CPM_BGO		    0x00800000	/* PLB to OPB bus arbiter */
-#define IBM_CPM_BGI		    0x00400000	/* OPB to PLB bridge */
-#define IBM_CPM_EBC		    0x00200000	/* External Bux Controller */
-#define IBM_CPM_EBM		    0x00100000	/* Ext Bus Master Interface */
-#define IBM_CPM_DMC		    0x00080000	/* SDRAM peripheral controller */
-#define IBM_CPM_PLB		    0x00040000	/* PLB bus arbiter */
-#define IBM_CPM_SRAM		0x00020000	/* SRAM memory controller */
-#define IBM_CPM_PPM		    0x00002000	/* PLB Performance Monitor */
-#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
-#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
-#define IBM_CPM_GPT		    0x00000400	/* General Purpose Timers  */
-#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
-#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
-#define IBM_CPM_UART2		0x00000100	/* serial port 1 */
-#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
-#define IBM_CPM_EMAC0  		0x00000020	/* EMAC 0     */
-
-#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
-				| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
-				| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
-				| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \
-				| IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \
-				| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \
-			  	| IBM_CPM_EMAC2 | IBM_CPM_EMAC3 )
-#endif /* __PPC_PLATFORMS_IBM440SP_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibmnp405h.c b/arch/ppc/platforms/4xx/ibmnp405h.c
deleted file mode 100644
index 1afc3642e5b1..000000000000
--- a/arch/ppc/platforms/4xx/ibmnp405h.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <asm/ocp.h>
-#include <platforms/4xx/ibmnp405h.h>
-
-static struct ocp_func_emac_data ibmnp405h_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= 0,		/* ZMII device index */
-	.zmii_mux	= 0,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 0,		/* MAL rx channel number */
-	.mal_tx_chan	= 0,		/* MAL tx channel number */
-	.wol_irq	= 41,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-
-static struct ocp_func_emac_data ibmnp405h_emac1_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= 0,		/* ZMII device index */
-	.zmii_mux	= 1,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 1,		/* MAL rx channel number */
-	.mal_tx_chan	= 2,		/* MAL tx channel number */
-	.wol_irq	= 41,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-static struct ocp_func_emac_data ibmnp405h_emac2_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= 0,		/* ZMII device index */
-	.zmii_mux	= 2,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 2,		/* MAL rx channel number */
-	.mal_tx_chan	= 4,		/* MAL tx channel number */
-	.wol_irq	= 41,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-static struct ocp_func_emac_data ibmnp405h_emac3_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx	= 0,		/* ZMII device index */
-	.zmii_mux	= 3,		/* ZMII input of this EMAC */
-	.mal_idx	= 0,		/* MAL device index */
-	.mal_rx_chan	= 3,		/* MAL rx channel number */
-	.mal_tx_chan	= 6,		/* MAL tx channel number */
-	.wol_irq	= 41,		/* WOL interrupt number */
-	.mdio_idx	= -1,		/* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ibmnp405h_mal0_def = {
-	.num_tx_chans	= 8,		/* Number of TX channels */
-	.num_rx_chans	= 4,		/* Number of RX channels */
-	.txeob_irq	= 17,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 18,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 46,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 47,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 45,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ibmnp405h_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_OPB,
-	  .index	= 0,
-	  .paddr	= 0xEF600000,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= 0xEF600500,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibmnp405h_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= 0xEF600700,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ibmnp405h_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= EMAC0_BASE,
-	  .irq		= 37,
-	  .pm		= IBM_CPM_EMAC0,
-	  .additions	= &ibmnp405h_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 1,
-	  .paddr	= 0xEF600900,
-	  .irq		= 38,
-	  .pm		= IBM_CPM_EMAC1,
-	  .additions	= &ibmnp405h_emac1_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 2,
-	  .paddr	= 0xEF600a00,
-	  .irq		= 39,
-	  .pm		= IBM_CPM_EMAC2,
-	  .additions	= &ibmnp405h_emac2_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 3,
-	  .paddr	= 0xEF600b00,
-	  .irq		= 40,
-	  .pm		= IBM_CPM_EMAC3,
-	  .additions	= &ibmnp405h_emac3_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_ZMII,
-	  .paddr	= 0xEF600C10,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibmnp405h.h b/arch/ppc/platforms/4xx/ibmnp405h.h
deleted file mode 100644
index 08a6a7791903..000000000000
--- a/arch/ppc/platforms/4xx/ibmnp405h.h
+++ /dev/null
@@ -1,154 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBMNP405H_H__
-#define __ASM_IBMNP405H_H__
-
-
-/* ibm405.h at bottom of this file */
-
-#define PPC405_PCI_CONFIG_ADDR	0xeec00000
-#define PPC405_PCI_CONFIG_DATA	0xeec00004
-#define PPC405_PCI_PHY_MEM_BASE	0x80000000	/* hose_a->pci_mem_offset */
-						/* setbat */
-#define PPC405_PCI_MEM_BASE	PPC405_PCI_PHY_MEM_BASE	/* setbat */
-#define PPC405_PCI_PHY_IO_BASE	0xe8000000	/* setbat */
-#define PPC405_PCI_IO_BASE	PPC405_PCI_PHY_IO_BASE	/* setbat */
-
-#define PPC405_PCI_LOWER_MEM	0x00000000	/* hose_a->mem_space.start */
-#define PPC405_PCI_UPPER_MEM	0xBfffffff	/* hose_a->mem_space.end */
-#define PPC405_PCI_LOWER_IO	0x00000000	/* hose_a->io_space.start */
-#define PPC405_PCI_UPPER_IO	0x0000ffff	/* hose_a->io_space.end */
-
-#define PPC405_ISA_IO_BASE	PPC405_PCI_IO_BASE
-
-#define PPC4xx_PCI_IO_ADDR	((uint)PPC405_PCI_PHY_IO_BASE)
-#define PPC4xx_PCI_IO_SIZE	((uint)64*1024)
-#define PPC4xx_PCI_CFG_ADDR	((uint)PPC405_PCI_CONFIG_ADDR)
-#define PPC4xx_PCI_CFG_SIZE	((uint)4*1024)
-#define PPC4xx_PCI_LCFG_ADDR	((uint)0xef400000)
-#define PPC4xx_PCI_LCFG_SIZE	((uint)4*1024)
-#define PPC4xx_ONB_IO_ADDR	((uint)0xef600000)
-#define PPC4xx_ONB_IO_SIZE	((uint)4*1024)
-
-/* serial port defines */
-#define RS_TABLE_SIZE	4
-
-#define UART0_INT	0
-#define UART1_INT	1
-#define PCIL0_BASE	0xEF400000
-#define UART0_IO_BASE	0xEF600300
-#define UART1_IO_BASE	0xEF600400
-#define OPB0_BASE	0xEF600600
-#define EMAC0_BASE	0xEF600800
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[e][i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base:(u8 *) UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS        \
-        STD_UART_OP(0)          \
-        STD_UART_OP(1)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS        \
-        STD_UART_OP(1)          \
-        STD_UART_OP(0)
-#endif
-
-/* DCR defines */
-/* ------------------------------------------------------------------------- */
-
-#define DCRN_CHCR_BASE	0x0F1
-#define DCRN_CHPSR_BASE	0x0B4
-#define DCRN_CPMSR_BASE	0x0BA
-#define DCRN_CPMFR_BASE	0x0B9
-#define DCRN_CPMER_BASE	0x0B8
-
-/* CPM Clocking & Power Management defines */
-#define IBM_CPM_PCI		0x40000000	/* PCI */
-#define IBM_CPM_EMAC2	0x20000000	/* EMAC 2 MII */
-#define IBM_CPM_EMAC3	0x04000000	/* EMAC 3 MII */
-#define IBM_CPM_EMAC0	0x00800000	/* EMAC 0 MII */
-#define IBM_CPM_EMAC1	0x00100000	/* EMAC 1 MII */
-#define IBM_CPM_EMMII	0	/* Shift value for MII */
-#define IBM_CPM_EMRX	1	/* Shift value for recv */
-#define IBM_CPM_EMTX	2	/* Shift value for MAC */
-#define IBM_CPM_UIC1	0x00020000	/* Universal Interrupt Controller */
-#define IBM_CPM_UIC0	0x00010000	/* Universal Interrupt Controller */
-#define IBM_CPM_CPU	0x00008000	/* processor core */
-#define IBM_CPM_EBC	0x00004000	/* ROM/SRAM peripheral controller */
-#define IBM_CPM_SDRAM0	0x00002000	/* SDRAM memory controller */
-#define IBM_CPM_GPIO0	0x00001000	/* General Purpose IO (??) */
-#define IBM_CPM_HDLC	0x00000800	/* HDCL */
-#define IBM_CPM_TMRCLK	0x00000400	/* CPU timers */
-#define IBM_CPM_PLB	0x00000100	/* PLB bus arbiter */
-#define IBM_CPM_OPB	0x00000080	/* PLB to OPB bridge */
-#define IBM_CPM_DMA	0x00000040	/* DMA controller */
-#define IBM_CPM_IIC0	0x00000010	/* IIC interface */
-#define IBM_CPM_UART0	0x00000002	/* serial port 0 */
-#define IBM_CPM_UART1	0x00000001	/* serial port 1 */
-/* this is the default setting for devices put to sleep when booting */
-
-#define DFLT_IBM4xx_PM	~(IBM_CPM_UIC0 | IBM_CPM_UIC1 | IBM_CPM_CPU 	\
-			| IBM_CPM_EBC | IBM_CPM_SDRAM0 | IBM_CPM_PLB 	\
-			| IBM_CPM_OPB | IBM_CPM_TMRCLK | IBM_CPM_DMA	\
-			| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 | IBM_CPM_EMAC2	\
-			| IBM_CPM_EMAC3 | IBM_CPM_PCI)
-
-#define DCRN_DMA0_BASE	0x100
-#define DCRN_DMA1_BASE	0x108
-#define DCRN_DMA2_BASE	0x110
-#define DCRN_DMA3_BASE	0x118
-#define DCRNCAP_DMA_SG	1	/* have DMA scatter/gather capability */
-#define DCRN_DMASR_BASE	0x120
-#define DCRN_EBC_BASE	0x012
-#define DCRN_DCP0_BASE	0x014
-#define DCRN_MAL_BASE	0x180
-#define DCRN_OCM0_BASE	0x018
-#define DCRN_PLB0_BASE	0x084
-#define DCRN_PLLMR_BASE	0x0B0
-#define DCRN_POB0_BASE	0x0A0
-#define DCRN_SDRAM0_BASE 0x010
-#define DCRN_UIC0_BASE	0x0C0
-#define DCRN_UIC1_BASE	0x0D0
-#define DCRN_CPC0_EPRCSR 0x0F3
-
-#define UIC0_UIC1NC	0x00000002
-
-#define CHR1_CETE	0x00000004	/* CPU external timer enable */
-#define UIC0	DCRN_UIC0_BASE
-#define UIC1	DCRN_UIC1_BASE
-
-#undef NR_UICS
-#define NR_UICS	2
-
-/* EMAC DCRN's FIXME: armin */
-#define DCRN_MALRXCTP2R(base)	((base) + 0x42)	/* Channel Rx 2 Channel Table Pointer */
-#define DCRN_MALRXCTP3R(base)	((base) + 0x43)	/* Channel Rx 3 Channel Table Pointer */
-#define DCRN_MALTXCTP4R(base)	((base) + 0x24)	/* Channel Tx 4 Channel Table Pointer */
-#define DCRN_MALTXCTP5R(base)	((base) + 0x25)	/* Channel Tx 5 Channel Table Pointer */
-#define DCRN_MALTXCTP6R(base)	((base) + 0x26)	/* Channel Tx 6 Channel Table Pointer */
-#define DCRN_MALTXCTP7R(base)	((base) + 0x27)	/* Channel Tx 7 Channel Table Pointer */
-#define DCRN_MALRCBS2(base)	((base) + 0x62)	/* Channel Rx 2 Channel Buffer Size */
-#define DCRN_MALRCBS3(base)	((base) + 0x63)	/* Channel Rx 3 Channel Buffer Size */
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBMNP405H_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibmstb4.c b/arch/ppc/platforms/4xx/ibmstb4.c
deleted file mode 100644
index 799a2eccccc3..000000000000
--- a/arch/ppc/platforms/4xx/ibmstb4.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-#include <platforms/4xx/ibmstb4.h>
-
-static struct ocp_func_iic_data ibmstb4_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ibmstb4_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] __initdata = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 2,
-	  .paddr	= UART2_IO_BASE,
-	  .irq		= UART2_INT,
-	  .pm		= IBM_CPM_UART2,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= IIC0_BASE,
-	  .irq		= IIC0_IRQ,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibmstb4_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= IIC1_BASE,
-	  .irq		= IIC1_IRQ,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ibmstb4_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= GPIO0_BASE,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IDE,
-	  .paddr	= IDE0_BASE,
-	  .irq		= IDE0_IRQ,
-	  .pm		= OCP_CPM_NA,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID,
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0x7fffff01,
-	  .triggering	= 0x00000000,
-	  .ext_irq_mask	= 0x0000007e,	/* IRQ0 - IRQ5 */
-	}
-};
-
-static struct resource ohci_usb_resources[] = {
-	[0] = {
-		.start	= USB0_BASE,
-		.end	= USB0_BASE + USB0_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= USB0_IRQ,
-		.end	= USB0_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static u64 dma_mask = 0xffffffffULL;
-
-static struct platform_device ohci_usb_device = {
-	.name		= "ppc-soc-ohci",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(ohci_usb_resources),
-	.resource	= ohci_usb_resources,
-	.dev		= {
-		.dma_mask = &dma_mask,
-		.coherent_dma_mask = 0xffffffffULL,
-	}
-};
-
-static struct platform_device *ibmstb4_devs[] __initdata = {
-	&ohci_usb_device,
-};
-
-static int __init
-ibmstb4_platform_add_devices(void)
-{
-	return platform_add_devices(ibmstb4_devs, ARRAY_SIZE(ibmstb4_devs));
-}
-arch_initcall(ibmstb4_platform_add_devices);
diff --git a/arch/ppc/platforms/4xx/ibmstb4.h b/arch/ppc/platforms/4xx/ibmstb4.h
deleted file mode 100644
index 31a08abaa4a2..000000000000
--- a/arch/ppc/platforms/4xx/ibmstb4.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBMSTB4_H__
-#define __ASM_IBMSTB4_H__
-
-
-/* serial port defines */
-#define STB04xxx_IO_BASE	((uint)0xe0000000)
-#define PPC4xx_PCI_IO_ADDR	STB04xxx_IO_BASE
-#define PPC4xx_ONB_IO_PADDR	STB04xxx_IO_BASE
-#define PPC4xx_ONB_IO_VADDR	((uint)0xe0000000)
-#define PPC4xx_ONB_IO_SIZE	((uint)14*64*1024)
-
-/*
- * map STB04xxx internal i/o address (0x400x00xx) to an address
- * which is below the 2GB limit...
- *
- * 4000 000x	uart1		-> 0xe000 000x
- * 4001 00xx	ppu
- * 4002 00xx	smart card
- * 4003 000x	iic
- * 4004 000x	uart0
- * 4005 0xxx	timer
- * 4006 00xx	gpio
- * 4007 00xx	smart card
- * 400b 000x	iic
- * 400c 000x	scp
- * 400d 000x	modem
- * 400e 000x	uart2
-*/
-#define STB04xxx_MAP_IO_ADDR(a)	(((uint)(a)) + (STB04xxx_IO_BASE - 0x40000000))
-
-#define RS_TABLE_SIZE		3
-#define UART0_INT		20
-
-#ifdef __BOOTER__
-#define UART0_IO_BASE		0x40040000
-#else
-#define UART0_IO_BASE		0xe0040000
-#endif
-
-#define UART1_INT		21
-
-#ifdef __BOOTER__
-#define UART1_IO_BASE		0x40000000
-#else
-#define UART1_IO_BASE		0xe0000000
-#endif
-
-#define UART2_INT		31
-#ifdef __BOOTER__
-#define UART2_IO_BASE		0x400e0000
-#else
-#define UART2_IO_BASE		0xe00e0000
-#endif
-
-#define IDE0_BASE	0x400F0000
-#define IDE0_SIZE	0x200
-#define IDE0_IRQ	25
-#define IIC0_BASE	0x40030000
-#define IIC1_BASE	0x400b0000
-#define OPB0_BASE	0x40000000
-#define GPIO0_BASE	0x40060000
-
-#define USB0_BASE	0x40010000
-#define USB0_SIZE	0xA0
-#define USB0_IRQ	18
-
-#define IIC_NUMS 2
-#define UART_NUMS	3
-#define IIC0_IRQ	9
-#define IIC1_IRQ	10
-#define IIC_OWN		0x55
-#define IIC_CLOCK	50
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (u8 *)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)		\
-	STD_UART_OP(2)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART2_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(1)		\
-	STD_UART_OP(0)		\
-	STD_UART_OP(2)
-#endif
-
-#if defined(CONFIG_UART0_TTYS2)
-#define SERIAL_DEBUG_IO_BASE	UART2_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(2)		\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-#endif
-
-#define DCRN_BE_BASE		0x090
-#define DCRN_DMA0_BASE		0x0C0
-#define DCRN_DMA1_BASE		0x0C8
-#define DCRN_DMA2_BASE		0x0D0
-#define DCRN_DMA3_BASE		0x0D8
-#define DCRNCAP_DMA_CC		1	/* have DMA chained count capability */
-#define DCRN_DMASR_BASE		0x0E0
-#define DCRN_PLB0_BASE		0x054
-#define DCRN_PLB1_BASE		0x064
-#define DCRN_POB0_BASE		0x0B0
-#define DCRN_SCCR_BASE		0x120
-#define DCRN_UIC0_BASE		0x040
-#define DCRN_BE_BASE		0x090
-#define DCRN_DMA0_BASE		0x0C0
-#define DCRN_DMA1_BASE		0x0C8
-#define DCRN_DMA2_BASE		0x0D0
-#define DCRN_DMA3_BASE		0x0D8
-#define DCRN_CIC_BASE 		0x030
-#define DCRN_DMASR_BASE		0x0E0
-#define DCRN_EBIMC_BASE		0x070
-#define DCRN_DCRX_BASE		0x020
-#define DCRN_CPMFR_BASE		0x102
-#define DCRN_SCCR_BASE		0x120
-#define UIC0 DCRN_UIC0_BASE
-
-#define IBM_CPM_IIC0	0x80000000	/* IIC 0 interface */
-#define IBM_CPM_USB0	0x40000000	/* IEEE-1284 */
-#define IBM_CPM_IIC1	0x20000000	/* IIC 1 interface */
-#define IBM_CPM_CPU	0x10000000	/* PPC405B3 clock control */
-#define IBM_CPM_AUD	0x08000000	/* Audio Decoder */
-#define IBM_CPM_EBIU	0x04000000	/* External Bus Interface Unit */
-#define IBM_CPM_SDRAM1	0x02000000	/* SDRAM 1 memory controller */
-#define IBM_CPM_DMA	0x01000000	/* DMA controller */
-#define IBM_CPM_DMA1	0x00800000	/* reserved */
-#define IBM_CPM_XPT1	0x00400000	/* reserved */
-#define IBM_CPM_XPT2	0x00200000	/* reserved */
-#define IBM_CPM_UART1	0x00100000	/* Serial 1 / Infrared */
-#define IBM_CPM_UART0	0x00080000	/* Serial 0 / 16550 */
-#define IBM_CPM_EPI	0x00040000	/* DCR Extension */
-#define IBM_CPM_SC0	0x00020000	/* Smart Card 0 */
-#define IBM_CPM_VID	0x00010000	/* reserved */
-#define IBM_CPM_SC1	0x00008000	/* Smart Card 1 */
-#define IBM_CPM_USBSDRA	0x00004000	/* SDRAM 0 memory controller */
-#define IBM_CPM_XPT0	0x00002000	/* Transport - 54 Mhz */
-#define IBM_CPM_CBS	0x00001000	/* Cross Bar Switch */
-#define IBM_CPM_GPT	0x00000800	/* GPTPWM */
-#define IBM_CPM_GPIO0	0x00000400	/* General Purpose IO 0 */
-#define IBM_CPM_DENC	0x00000200	/* Digital video Encoder */
-#define IBM_CPM_TMRCLK	0x00000100	/* CPU timers */
-#define IBM_CPM_XPT27	0x00000080	/* Transport - 27 Mhz */
-#define IBM_CPM_UIC	0x00000040	/* Universal Interrupt Controller */
-#define IBM_CPM_SSP	0x00000010	/* Modem Serial Interface (SSP) */
-#define IBM_CPM_UART2	0x00000008	/* Serial Control Port */
-#define IBM_CPM_DDIO	0x00000004	/* Descrambler */
-#define IBM_CPM_VID2	0x00000002	/* Video Decoder clock domain 2 */
-
-#define DFLT_IBM4xx_PM	~(IBM_CPM_CPU | IBM_CPM_EBIU | IBM_CPM_SDRAM1 \
-			| IBM_CPM_DMA | IBM_CPM_DMA1 | IBM_CPM_CBS \
-			| IBM_CPM_USBSDRA | IBM_CPM_XPT0 | IBM_CPM_TMRCLK \
-			| IBM_CPM_XPT27 | IBM_CPM_UIC )
-
-#define DCRN_BEAR	(DCRN_BE_BASE + 0x0)	/* Bus Error Address Register */
-#define DCRN_BESR	(DCRN_BE_BASE + 0x1)	/* Bus Error Syndrome Register */
-/* DCRN_BESR */
-#define BESR_DSES	0x80000000	/* Data-Side Error Status */
-#define BESR_DMES	0x40000000	/* DMA Error Status */
-#define BESR_RWS	0x20000000	/* Read/Write Status */
-#define BESR_ETMASK	0x1C000000	/* Error Type */
-#define ET_PROT		0
-#define ET_PARITY	1
-#define ET_NCFG		2
-#define ET_BUSERR	4
-#define ET_BUSTO	6
-
-#define CHR1_CETE	0x00800000	/* CPU external timer enable */
-#define CHR1_PCIPW	0x00008000	/* PCI Int enable/Peripheral Write enable */
-
-#define DCRN_CICCR	(DCRN_CIC_BASE + 0x0)	/* CIC Control Register */
-#define DCRN_DMAS1	(DCRN_CIC_BASE + 0x1)	/* DMA Select1 Register */
-#define DCRN_DMAS2	(DCRN_CIC_BASE + 0x2)	/* DMA Select2 Register */
-#define DCRN_CICVCR	(DCRN_CIC_BASE + 0x3)	/* CIC Video COntro Register */
-#define DCRN_CICSEL3	(DCRN_CIC_BASE + 0x5)	/* CIC Select 3 Register */
-#define DCRN_SGPO	(DCRN_CIC_BASE + 0x6)	/* CIC GPIO Output Register */
-#define DCRN_SGPOD	(DCRN_CIC_BASE + 0x7)	/* CIC GPIO OD Register */
-#define DCRN_SGPTC	(DCRN_CIC_BASE + 0x8)	/* CIC GPIO Tristate Ctrl Reg */
-#define DCRN_SGPI	(DCRN_CIC_BASE + 0x9)	/* CIC GPIO Input Reg */
-
-#define DCRN_DCRXICR	(DCRN_DCRX_BASE + 0x0)	/* Internal Control Register */
-#define DCRN_DCRXISR	(DCRN_DCRX_BASE + 0x1)	/* Internal Status Register */
-#define DCRN_DCRXECR	(DCRN_DCRX_BASE + 0x2)	/* External Control Register */
-#define DCRN_DCRXESR	(DCRN_DCRX_BASE + 0x3)	/* External Status Register */
-#define DCRN_DCRXTAR	(DCRN_DCRX_BASE + 0x4)	/* Target Address Register */
-#define DCRN_DCRXTDR	(DCRN_DCRX_BASE + 0x5)	/* Target Data Register */
-#define DCRN_DCRXIGR	(DCRN_DCRX_BASE + 0x6)	/* Interrupt Generation Register */
-#define DCRN_DCRXBCR	(DCRN_DCRX_BASE + 0x7)	/* Line Buffer Control Register */
-
-#define DCRN_BRCRH0	(DCRN_EBIMC_BASE + 0x0)	/* Bus Region Config High 0 */
-#define DCRN_BRCRH1	(DCRN_EBIMC_BASE + 0x1)	/* Bus Region Config High 1 */
-#define DCRN_BRCRH2	(DCRN_EBIMC_BASE + 0x2)	/* Bus Region Config High 2 */
-#define DCRN_BRCRH3	(DCRN_EBIMC_BASE + 0x3)	/* Bus Region Config High 3 */
-#define DCRN_BRCRH4	(DCRN_EBIMC_BASE + 0x4)	/* Bus Region Config High 4 */
-#define DCRN_BRCRH5	(DCRN_EBIMC_BASE + 0x5)	/* Bus Region Config High 5 */
-#define DCRN_BRCRH6	(DCRN_EBIMC_BASE + 0x6)	/* Bus Region Config High 6 */
-#define DCRN_BRCRH7	(DCRN_EBIMC_BASE + 0x7)	/* Bus Region Config High 7 */
-#define DCRN_BRCR0	(DCRN_EBIMC_BASE + 0x10)	/* BRC 0 */
-#define DCRN_BRCR1	(DCRN_EBIMC_BASE + 0x11)	/* BRC 1 */
-#define DCRN_BRCR2	(DCRN_EBIMC_BASE + 0x12)	/* BRC 2 */
-#define DCRN_BRCR3	(DCRN_EBIMC_BASE + 0x13)	/* BRC 3 */
-#define DCRN_BRCR4	(DCRN_EBIMC_BASE + 0x14)	/* BRC 4 */
-#define DCRN_BRCR5	(DCRN_EBIMC_BASE + 0x15)	/* BRC 5 */
-#define DCRN_BRCR6	(DCRN_EBIMC_BASE + 0x16)	/* BRC 6 */
-#define DCRN_BRCR7	(DCRN_EBIMC_BASE + 0x17)	/* BRC 7 */
-#define DCRN_BEAR0	(DCRN_EBIMC_BASE + 0x20)	/* Bus Error Address Register */
-#define DCRN_BESR0	(DCRN_EBIMC_BASE + 0x21)	/* Bus Error Status Register */
-#define DCRN_BIUCR	(DCRN_EBIMC_BASE + 0x2A)	/* Bus Interfac Unit Ctrl Reg */
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBMSTB4_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ibmstbx25.c b/arch/ppc/platforms/4xx/ibmstbx25.c
deleted file mode 100644
index 090ddcbecc5e..000000000000
--- a/arch/ppc/platforms/4xx/ibmstbx25.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <asm/ocp.h>
-#include <platforms/4xx/ibmstbx25.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_iic_data ibmstbx25_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] __initdata = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index        = 0,
-	  .paddr	= UART0_IO_BASE,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= UART1_IO_BASE,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 2,
-	  .paddr	= UART2_IO_BASE,
-	  .irq		= UART2_INT,
-	  .pm		= IBM_CPM_UART2,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .paddr	= IIC0_BASE,
-	  .irq		= IIC0_IRQ,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ibmstbx25_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .paddr	= GPIO0_BASE,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity 	= 0xffff8f80,
-	  .triggering	= 0x00000000,
-	  .ext_irq_mask	= 0x0000707f,	/* IRQ7 - IRQ9, IRQ0 - IRQ6 */
-	}
-};
diff --git a/arch/ppc/platforms/4xx/ibmstbx25.h b/arch/ppc/platforms/4xx/ibmstbx25.h
deleted file mode 100644
index 31b63343e641..000000000000
--- a/arch/ppc/platforms/4xx/ibmstbx25.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBMSTBX25_H__
-#define __ASM_IBMSTBX25_H__
-
-
-/* serial port defines */
-#define STBx25xx_IO_BASE	((uint)0xe0000000)
-#define PPC4xx_ONB_IO_PADDR	STBx25xx_IO_BASE
-#define PPC4xx_ONB_IO_VADDR	((uint)0xe0000000)
-#define PPC4xx_ONB_IO_SIZE	((uint)14*64*1024)
-
-/*
- * map STBxxxx internal i/o address (0x400x00xx) to an address
- * which is below the 2GB limit...
- *
- * 4000 000x	uart1		-> 0xe000 000x
- * 4001 00xx	uart2
- * 4002 00xx	smart card
- * 4003 000x	iic
- * 4004 000x	uart0
- * 4005 0xxx	timer
- * 4006 00xx	gpio
- * 4007 00xx	smart card
- * 400b 000x	iic
- * 400c 000x	scp
- * 400d 000x	modem
- * 400e 000x	uart2
-*/
-#define STBx25xx_MAP_IO_ADDR(a)	(((uint)(a)) + (STBx25xx_IO_BASE - 0x40000000))
-
-#define RS_TABLE_SIZE	3
-
-#define OPB_BASE_START	0x40000000
-#define EBIU_BASE_START	0xF0100000
-#define DCR_BASE_START  0x0000
-
-#ifdef __BOOTER__
-#define UART1_IO_BASE	0x40000000
-#define UART2_IO_BASE	0x40010000
-#else
-#define UART1_IO_BASE	0xe0000000
-#define UART2_IO_BASE	0xe0010000
-#endif
-#define SC0_BASE	0x40020000	/* smart card #0 */
-#define IIC0_BASE	0x40030000
-#ifdef __BOOTER__
-#define UART0_IO_BASE	0x40040000
-#else
-#define UART0_IO_BASE	0xe0040000
-#endif
-#define SCC0_BASE	0x40040000	/* Serial 0 controller IrdA */
-#define GPT0_BASE	0x40050000	/* General purpose timers */
-#define GPIO0_BASE	0x40060000
-#define SC1_BASE	0x40070000	/* smart card #1 */
-#define SCP0_BASE	0x400C0000	/* Serial Controller Port */
-#define SSP0_BASE	0x400D0000	/* Sync serial port */
-
-#define IDE0_BASE		0xf0100000
-#define REDWOOD_IDE_CTRL	0xf1100000
-
-#define RTCFPC_IRQ	0
-#define XPORT_IRQ	1
-#define AUD_IRQ		2
-#define AID_IRQ		3
-#define DMA0		4
-#define DMA1_IRQ	5
-#define DMA2_IRQ	6
-#define DMA3_IRQ	7
-#define SC0_IRQ		8
-#define IIC0_IRQ	9
-#define IIR0_IRQ	10
-#define GPT0_IRQ	11
-#define GPT1_IRQ	12
-#define SCP0_IRQ	13
-#define SSP0_IRQ	14
-#define GPT2_IRQ	15	/* count down timer */
-#define SC1_IRQ		16
-/* IRQ 17 - 19  external */
-#define UART0_INT	20
-#define UART1_INT	21
-#define UART2_INT	22
-#define XPTDMA_IRQ	23
-#define DCRIDE_IRQ	24
-/* IRQ 25 - 30 external */
-#define IDE0_IRQ	26
-
-#define IIC_NUMS	1
-#define UART_NUMS	3
-#define IIC_OWN		0x55
-#define IIC_CLOCK	50
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
-
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (u8 *)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE	UART0_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)		\
-	STD_UART_OP(2)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE	UART2_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(1)		\
-	STD_UART_OP(0)		\
-	STD_UART_OP(2)
-#endif
-
-#if defined(CONFIG_UART0_TTYS2)
-#define SERIAL_DEBUG_IO_BASE	UART2_IO_BASE
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(2)		\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-#endif
-
-#define DCRN_BE_BASE		0x090
-#define DCRN_DMA0_BASE		0x0C0
-#define DCRN_DMA1_BASE		0x0C8
-#define DCRN_DMA2_BASE		0x0D0
-#define DCRN_DMA3_BASE		0x0D8
-#define DCRNCAP_DMA_CC		1	/* have DMA chained count capability */
-#define DCRN_DMASR_BASE		0x0E0
-#define DCRN_PLB0_BASE		0x054
-#define DCRN_PLB1_BASE		0x064
-#define DCRN_POB0_BASE		0x0B0
-#define DCRN_SCCR_BASE		0x120
-#define DCRN_UIC0_BASE		0x040
-#define DCRN_BE_BASE		0x090
-#define DCRN_DMA0_BASE		0x0C0
-#define DCRN_DMA1_BASE		0x0C8
-#define DCRN_DMA2_BASE		0x0D0
-#define DCRN_DMA3_BASE		0x0D8
-#define DCRN_CIC_BASE 		0x030
-#define DCRN_DMASR_BASE		0x0E0
-#define DCRN_EBIMC_BASE		0x070
-#define DCRN_DCRX_BASE		0x020
-#define DCRN_CPMFR_BASE		0x102
-#define DCRN_SCCR_BASE		0x120
-#define DCRN_RTCFP_BASE		0x310
-
-#define UIC0 DCRN_UIC0_BASE
-
-#define IBM_CPM_IIC0	0x80000000	/* IIC 0 interface */
-#define IBM_CPM_CPU	0x10000000	/* PPC405B3 clock control */
-#define IBM_CPM_AUD	0x08000000	/* Audio Decoder */
-#define IBM_CPM_EBIU	0x04000000	/* External Bus Interface Unit */
-#define IBM_CPM_IRR	0x02000000	/* Infrared receiver */
-#define IBM_CPM_DMA	0x01000000	/* DMA controller */
-#define IBM_CPM_UART2	0x00200000	/* Serial Control Port */
-#define IBM_CPM_UART1	0x00100000	/* Serial 1 / Infrared */
-#define IBM_CPM_UART0	0x00080000	/* Serial 0 / 16550 */
-#define IBM_PM_DCRIDE	0x00040000	/* DCR timeout & IDE line Mode clock */
-#define IBM_CPM_SC0	0x00020000	/* Smart Card 0 */
-#define IBM_CPM_VID	0x00010000	/* reserved */
-#define IBM_CPM_SC1	0x00008000	/* Smart Card 0 */
-#define IBM_CPM_XPT0	0x00002000	/* Transport - 54 Mhz */
-#define IBM_CPM_CBS	0x00001000	/* Cross Bar Switch */
-#define IBM_CPM_GPT	0x00000800	/* GPTPWM */
-#define IBM_CPM_GPIO0	0x00000400	/* General Purpose IO 0 */
-#define IBM_CPM_DENC	0x00000200	/* Digital video Encoder */
-#define IBM_CPM_C405T	0x00000100	/* CPU timers */
-#define IBM_CPM_XPT27	0x00000080	/* Transport - 27 Mhz */
-#define IBM_CPM_UIC	0x00000040	/* Universal Interrupt Controller */
-#define IBM_CPM_RTCFPC	0x00000020	/* Realtime clock and front panel */
-#define IBM_CPM_SSP	0x00000010	/* Modem Serial Interface (SSP) */
-#define IBM_CPM_VID2	0x00000002	/* Video Decoder clock domain 2 */
-#define DFLT_IBM4xx_PM	~(IBM_CPM_CPU | IBM_CPM_EBIU | IBM_CPM_DMA	\
-			| IBM_CPM_CBS | IBM_CPM_XPT0 | IBM_CPM_C405T 	\
-			| IBM_CPM_XPT27 | IBM_CPM_UIC)
-
-#define DCRN_BEAR	(DCRN_BE_BASE + 0x0)	/* Bus Error Address Register */
-#define DCRN_BESR	(DCRN_BE_BASE + 0x1)	/* Bus Error Syndrome Register */
-/* DCRN_BESR */
-#define BESR_DSES	0x80000000	/* Data-Side Error Status */
-#define BESR_DMES	0x40000000	/* DMA Error Status */
-#define BESR_RWS	0x20000000	/* Read/Write Status */
-#define BESR_ETMASK	0x1C000000	/* Error Type */
-#define ET_PROT		0
-#define ET_PARITY	1
-#define ET_NCFG		2
-#define ET_BUSERR	4
-#define ET_BUSTO	6
-
-#define CHR1_CETE	0x00800000	/* CPU external timer enable */
-#define CHR1_PCIPW	0x00008000	/* PCI Int enable/Peripheral Write enable */
-
-#define DCRN_CICCR	(DCRN_CIC_BASE + 0x0)	/* CIC Control Register */
-#define DCRN_DMAS1	(DCRN_CIC_BASE + 0x1)	/* DMA Select1 Register */
-#define DCRN_DMAS2	(DCRN_CIC_BASE + 0x2)	/* DMA Select2 Register */
-#define DCRN_CICVCR	(DCRN_CIC_BASE + 0x3)	/* CIC Video COntro Register */
-#define DCRN_CICSEL3	(DCRN_CIC_BASE + 0x5)	/* CIC Select 3 Register */
-#define DCRN_SGPO	(DCRN_CIC_BASE + 0x6)	/* CIC GPIO Output Register */
-#define DCRN_SGPOD	(DCRN_CIC_BASE + 0x7)	/* CIC GPIO OD Register */
-#define DCRN_SGPTC	(DCRN_CIC_BASE + 0x8)	/* CIC GPIO Tristate Ctrl Reg */
-#define DCRN_SGPI	(DCRN_CIC_BASE + 0x9)	/* CIC GPIO Input Reg */
-
-#define DCRN_DCRXICR	(DCRN_DCRX_BASE + 0x0)	/* Internal Control Register */
-#define DCRN_DCRXISR	(DCRN_DCRX_BASE + 0x1)	/* Internal Status Register */
-#define DCRN_DCRXECR	(DCRN_DCRX_BASE + 0x2)	/* External Control Register */
-#define DCRN_DCRXESR	(DCRN_DCRX_BASE + 0x3)	/* External Status Register */
-#define DCRN_DCRXTAR	(DCRN_DCRX_BASE + 0x4)	/* Target Address Register */
-#define DCRN_DCRXTDR	(DCRN_DCRX_BASE + 0x5)	/* Target Data Register */
-#define DCRN_DCRXIGR	(DCRN_DCRX_BASE + 0x6)	/* Interrupt Generation Register */
-#define DCRN_DCRXBCR	(DCRN_DCRX_BASE + 0x7)	/* Line Buffer Control Register */
-
-#define DCRN_BRCRH0	(DCRN_EBIMC_BASE + 0x0)	/* Bus Region Config High 0 */
-#define DCRN_BRCRH1	(DCRN_EBIMC_BASE + 0x1)	/* Bus Region Config High 1 */
-#define DCRN_BRCRH2	(DCRN_EBIMC_BASE + 0x2)	/* Bus Region Config High 2 */
-#define DCRN_BRCRH3	(DCRN_EBIMC_BASE + 0x3)	/* Bus Region Config High 3 */
-#define DCRN_BRCRH4	(DCRN_EBIMC_BASE + 0x4)	/* Bus Region Config High 4 */
-#define DCRN_BRCRH5	(DCRN_EBIMC_BASE + 0x5)	/* Bus Region Config High 5 */
-#define DCRN_BRCRH6	(DCRN_EBIMC_BASE + 0x6)	/* Bus Region Config High 6 */
-#define DCRN_BRCRH7	(DCRN_EBIMC_BASE + 0x7)	/* Bus Region Config High 7 */
-#define DCRN_BRCR0	(DCRN_EBIMC_BASE + 0x10)	/* BRC 0 */
-#define DCRN_BRCR1	(DCRN_EBIMC_BASE + 0x11)	/* BRC 1 */
-#define DCRN_BRCR2	(DCRN_EBIMC_BASE + 0x12)	/* BRC 2 */
-#define DCRN_BRCR3	(DCRN_EBIMC_BASE + 0x13)	/* BRC 3 */
-#define DCRN_BRCR4	(DCRN_EBIMC_BASE + 0x14)	/* BRC 4 */
-#define DCRN_BRCR5	(DCRN_EBIMC_BASE + 0x15)	/* BRC 5 */
-#define DCRN_BRCR6	(DCRN_EBIMC_BASE + 0x16)	/* BRC 6 */
-#define DCRN_BRCR7	(DCRN_EBIMC_BASE + 0x17)	/* BRC 7 */
-#define DCRN_BEAR0	(DCRN_EBIMC_BASE + 0x20)	/* Bus Error Address Register */
-#define DCRN_BESR0	(DCRN_EBIMC_BASE + 0x21)	/* Bus Error Status Register */
-#define DCRN_BIUCR	(DCRN_EBIMC_BASE + 0x2A)	/* Bus Interfac Unit Ctrl Reg */
-
-#define DCRN_RTC_FPC0_CNTL 	(DCRN_RTCFP_BASE + 0x00)	/* RTC cntl */
-#define DCRN_RTC_FPC0_INT 	(DCRN_RTCFP_BASE + 0x01)	/* RTC Interrupt */
-#define DCRN_RTC_FPC0_TIME 	(DCRN_RTCFP_BASE + 0x02)	/* RTC time reg */
-#define DCRN_RTC_FPC0_ALRM 	(DCRN_RTCFP_BASE + 0x03)	/* RTC Alarm reg */
-#define DCRN_RTC_FPC0_D1 	(DCRN_RTCFP_BASE + 0x04)	/* LED Data 1 */
-#define DCRN_RTC_FPC0_D2 	(DCRN_RTCFP_BASE + 0x05)	/* LED Data 2 */
-#define DCRN_RTC_FPC0_D3 	(DCRN_RTCFP_BASE + 0x06)	/* LED Data 3 */
-#define DCRN_RTC_FPC0_D4 	(DCRN_RTCFP_BASE + 0x07)	/* LED Data 4 */
-#define DCRN_RTC_FPC0_D5 	(DCRN_RTCFP_BASE + 0x08)	/* LED Data 5 */
-#define DCRN_RTC_FPC0_FCNTL 	(DCRN_RTCFP_BASE + 0x09)	/* LED control */
-#define DCRN_RTC_FPC0_BRT 	(DCRN_RTCFP_BASE + 0x0A)	/* Brightness cntl */
-
-#include <asm/ibm405.h>
-
-#endif				/* __ASM_IBMSTBX25_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/luan.c b/arch/ppc/platforms/4xx/luan.c
deleted file mode 100644
index f6d8c2e8b6b7..000000000000
--- a/arch/ppc/platforms/4xx/luan.c
+++ /dev/null
@@ -1,371 +0,0 @@
-/*
- * Luan board specific routines
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2004-2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/pci-bridge.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/ibm44x_common.h>
-#include <syslib/ibm440gx_common.h>
-#include <syslib/ibm440sp_common.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-static void __init
-luan_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	if (mfspr(SPRN_CCR1) & CCR1_TCS)
-		freq = LUAN_TMR_CLK;
-	else
-		freq = clocks.cpu;
-
-	ibm44x_calibrate_decr(freq);
-}
-
-static int
-luan_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: PPC440SP EVB (Luan)\n");
-
-	return 0;
-}
-
-static inline int
-luan_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-
-	/* PCIX0 in adapter mode, no host interrupt routing */
-
-	/* PCIX1 */
-	if (hose->index == 0) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 49, 49, 49, 49 },	/* IDSEL 1 - PCIX1 Slot 0 */
-			{ 49, 49, 49, 49 },	/* IDSEL 2 - PCIX1 Slot 1 */
-			{ 49, 49, 49, 49 },	/* IDSEL 3 - PCIX1 Slot 2 */
-			{ 49, 49, 49, 49 },	/* IDSEL 4 - PCIX1 Slot 3 */
-		};
-		const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	/* PCIX2 */
-	} else if (hose->index == 1) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 50, 50, 50, 50 },	/* IDSEL 1 - PCIX2 Slot 0 */
-			{ 50, 50, 50, 50 },	/* IDSEL 2 - PCIX2 Slot 1 */
-			{ 50, 50, 50, 50 },	/* IDSEL 3 - PCIX2 Slot 2 */
-			{ 50, 50, 50, 50 },	/* IDSEL 4 - PCIX2 Slot 3 */
-		};
-		const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-	return -1;
-}
-
-static void __init luan_set_emacdata(void)
-{
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-
-	/* Set phy_map, phy_mode, and mac_addr for the EMAC */
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
-	emacdata = def->additions;
-	emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-	emacdata->phy_mode = PHY_MODE_GMII;
-	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-}
-
-#define PCIX_READW(offset) \
-	(readw((void *)((u32)pcix_reg_base+offset)))
-
-#define PCIX_WRITEW(value, offset) \
-	(writew(value, (void *)((u32)pcix_reg_base+offset)))
-
-#define PCIX_WRITEL(value, offset) \
-	(writel(value, (void *)((u32)pcix_reg_base+offset)))
-
-static void __init
-luan_setup_pcix(void)
-{
-	int i;
-	void *pcix_reg_base;
-
-	for (i=0;i<3;i++) {
-		pcix_reg_base = ioremap64(PCIX0_REG_BASE + i*PCIX_REG_OFFSET, PCIX_REG_SIZE);
-
-		/* Enable PCIX0 I/O, Mem, and Busmaster cycles */
-		PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
-
-		/* Disable all windows */
-		PCIX_WRITEL(0, PCIX0_POM0SA);
-		PCIX_WRITEL(0, PCIX0_POM1SA);
-		PCIX_WRITEL(0, PCIX0_POM2SA);
-		PCIX_WRITEL(0, PCIX0_PIM0SA);
-		PCIX_WRITEL(0, PCIX0_PIM0SAH);
-		PCIX_WRITEL(0, PCIX0_PIM1SA);
-		PCIX_WRITEL(0, PCIX0_PIM2SA);
-		PCIX_WRITEL(0, PCIX0_PIM2SAH);
-
-		/*
-		 * Setup 512MB PLB->PCI outbound mem window
-		 * (a_n000_0000->0_n000_0000)
-		 * */
-		PCIX_WRITEL(0x0000000a, PCIX0_POM0LAH);
-		PCIX_WRITEL(0x80000000 | i*LUAN_PCIX_MEM_SIZE, PCIX0_POM0LAL);
-		PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
-		PCIX_WRITEL(0x80000000 | i*LUAN_PCIX_MEM_SIZE, PCIX0_POM0PCIAL);
-		PCIX_WRITEL(0xe0000001, PCIX0_POM0SA);
-
-		/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
-		PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
-		PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
-		PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA);
-		PCIX_WRITEL(0xffffffff, PCIX0_PIM0SAH);
-
-		iounmap(pcix_reg_base);
-	}
-
-	eieio();
-}
-
-static void __init
-luan_setup_hose(struct pci_controller *hose,
-		int lower_mem,
-		int upper_mem,
-		int cfga,
-		int cfgd,
-		u64 pcix_io_base)
-{
-	char name[20];
-
-	sprintf(name, "PCIX%d host bridge", hose->index);
-
-	hose->pci_mem_offset = LUAN_PCIX_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			LUAN_PCIX_LOWER_IO,
-			LUAN_PCIX_UPPER_IO,
-			IORESOURCE_IO,
-			name);
-
-	pci_init_resource(&hose->mem_resources[0],
-			lower_mem,
-			upper_mem,
-			IORESOURCE_MEM,
-			name);
-
-	hose->io_space.start = LUAN_PCIX_LOWER_IO;
-	hose->io_space.end = LUAN_PCIX_UPPER_IO;
-	hose->mem_space.start = lower_mem;
-	hose->mem_space.end = upper_mem;
-	hose->io_base_virt = ioremap64(pcix_io_base, PCIX_IO_SIZE);
-	isa_io_base = (unsigned long) hose->io_base_virt;
-
-	setup_indirect_pci(hose, cfga, cfgd);
-	hose->set_cfg_type = 1;
-}
-
-static void __init
-luan_setup_hoses(void)
-{
-	struct pci_controller *hose1, *hose2;
-
-	/* Configure windows on the PCI-X host bridge */
-	luan_setup_pcix();
-
-	/* Allocate hoses for PCIX1 and PCIX2 */
-	hose1 = pcibios_alloc_controller();
-	if (!hose1)
-		return;
-
-	hose2 = pcibios_alloc_controller();
-	if (!hose2) {
-		pcibios_free_controller(hose1);
-		return;
-	}
-
-	/* Setup PCIX1 */
-	hose1->first_busno = 0;
-	hose1->last_busno = 0xff;
-
-	luan_setup_hose(hose1,
-			LUAN_PCIX1_LOWER_MEM,
-			LUAN_PCIX1_UPPER_MEM,
-			PCIX1_CFGA,
-			PCIX1_CFGD,
-			PCIX1_IO_BASE);
-
-	hose1->last_busno = pciauto_bus_scan(hose1, hose1->first_busno);
-
-	/* Setup PCIX2 */
-	hose2->first_busno = hose1->last_busno + 1;
-	hose2->last_busno = 0xff;
-
-	luan_setup_hose(hose2,
-			LUAN_PCIX2_LOWER_MEM,
-			LUAN_PCIX2_UPPER_MEM,
-			PCIX2_CFGA,
-			PCIX2_CFGD,
-			PCIX2_IO_BASE);
-
-	hose2->last_busno = pciauto_bus_scan(hose2, hose2->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = luan_map_irq;
-}
-
-TODC_ALLOC();
-
-static void __init
-luan_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440SP_UART0_ADDR, 8);
-	port.irq = UART0_INT;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-	port.membase = ioremap64(PPC440SP_UART1_ADDR, 8);
-	port.irq = UART1_INT;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-
-	port.membase = ioremap64(PPC440SP_UART2_ADDR, 8);
-	port.irq = UART2_INT;
-	port.uartclk = BASE_BAUD;
-	port.line = 2;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 2 failed\n");
-	}
-}
-
-static void __init
-luan_setup_arch(void)
-{
-	luan_set_emacdata();
-
-#if !defined(CONFIG_BDI_SWITCH)
-	/*
-	 * The Abatron BDI JTAG debugger does not tolerate others
-	 * mucking with the debug registers.
-	 */
-        mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM));
-#endif
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	/* 440GX and 440SP clocking is the same -mdp */
-	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* init to some ~sane value until calibrate_delay() runs */
-        loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCIXn host bridges */
-	luan_setup_hoses();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	luan_early_serial_map();
-
-	/* Identify the system */
-	printk("Luan port (MontaVista Software, Inc. <source@mvista.com>)\n");
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = luan_setup_arch;
-	ppc_md.show_cpuinfo = luan_show_cpuinfo;
-	ppc_md.find_end_of_memory = ibm440sp_find_end_of_memory;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = luan_calibrate_decr;
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = luan_early_serial_map;
-#endif
-}
diff --git a/arch/ppc/platforms/4xx/luan.h b/arch/ppc/platforms/4xx/luan.h
deleted file mode 100644
index 68dd46b0a5c4..000000000000
--- a/arch/ppc/platforms/4xx/luan.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Luan board definitions
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2004-2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_LUAN_H__
-#define __ASM_LUAN_H__
-
-#include <platforms/4xx/ibm440sp.h>
-
-/* F/W TLB mapping used in bootloader glue to reset EMAC */
-#define PPC44x_EMAC0_MR0	0xa0000800
-
-/* Location of MAC addresses in PIBS image */
-#define PIBS_FLASH_BASE		0xffe00000
-#define PIBS_MAC_BASE		(PIBS_FLASH_BASE+0x1b0400)
-
-/* External timer clock frequency */
-#define LUAN_TMR_CLK		25000000
-
-/* Flash */
-#define LUAN_FPGA_REG_0			0x0000000148300000ULL
-#define LUAN_BOOT_LARGE_FLASH(x)	(x & 0x40)
-#define LUAN_SMALL_FLASH_LOW		0x00000001ff900000ULL
-#define LUAN_SMALL_FLASH_HIGH		0x00000001ffe00000ULL
-#define LUAN_SMALL_FLASH_SIZE		0x100000
-#define LUAN_LARGE_FLASH_LOW		0x00000001ff800000ULL
-#define LUAN_LARGE_FLASH_HIGH		0x00000001ffc00000ULL
-#define LUAN_LARGE_FLASH_SIZE		0x400000
-
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	3
-
-/* PIBS defined UART mappings, used before early_serial_setup */
-#define UART0_IO_BASE	0xa0000200
-#define UART1_IO_BASE	0xa0000300
-#define UART2_IO_BASE	0xa0000600
-
-#define BASE_BAUD	11059200
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)		\
-	STD_UART_OP(2)
-
-/* PCI support */
-#define LUAN_PCIX_LOWER_IO	0x00000000
-#define LUAN_PCIX_UPPER_IO	0x0000ffff
-#define LUAN_PCIX0_LOWER_MEM	0x80000000
-#define LUAN_PCIX0_UPPER_MEM	0x9fffffff
-#define LUAN_PCIX1_LOWER_MEM	0xa0000000
-#define LUAN_PCIX1_UPPER_MEM	0xbfffffff
-#define LUAN_PCIX2_LOWER_MEM	0xc0000000
-#define LUAN_PCIX2_UPPER_MEM	0xdfffffff
-
-#define LUAN_PCIX_MEM_SIZE	0x20000000
-#define LUAN_PCIX_MEM_OFFSET	0x00000000
-
-#endif				/* __ASM_LUAN_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c
deleted file mode 100644
index 308386ef6f77..000000000000
--- a/arch/ppc/platforms/4xx/ocotea.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * Ocotea board specific routines
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2003-2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/pci-bridge.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/ppcboot.h>
-#include <asm/tlbflush.h>
-
-#include <syslib/gen550.h>
-#include <syslib/ibm440gx_common.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-static void __init
-ocotea_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	if (mfspr(SPRN_CCR1) & CCR1_TCS)
-		freq = OCOTEA_TMR_CLK;
-	else
-		freq = clocks.cpu;
-
-	ibm44x_calibrate_decr(freq);
-}
-
-static int
-ocotea_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: PPC440GX EVB (Ocotea)\n");
-	ibm440gx_show_cpuinfo(m);
-	return 0;
-}
-
-static inline int
-ocotea_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 23, 23, 23, 23 },	/* IDSEL 1 - PCI Slot 0 */
-		{ 24, 24, 24, 24 },	/* IDSEL 2 - PCI Slot 1 */
-		{ 25, 25, 25, 25 },	/* IDSEL 3 - PCI Slot 2 */
-		{ 26, 26, 26, 26 },	/* IDSEL 4 - PCI Slot 3 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __init ocotea_set_emacdata(void)
-{
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-	int i;
-
-	/*
-	 * Note: Current rev. board only operates in Group 4a
-	 * mode, so we always set EMAC0-1 for SMII and EMAC2-3
-	 * for RGMII (though these could run in RTBI just the same).
-	 *
-	 * The FPGA reg 3 information isn't even suitable for
-	 * determining the phy_mode, so if the board becomes
-	 * usable in !4a, it will be necessary to parse an environment
-	 * variable from the firmware or similar to properly configure
-	 * the phy_map/phy_mode.
-	 */
-	/* Set phy_map, phy_mode, and mac_addr for each EMAC */
-	for (i=0; i<4; i++) {
-		def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
-		emacdata = def->additions;
-		if (i < 2) {
-			emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-			emacdata->phy_mode = PHY_MODE_SMII;
-		}
-		else {
-			emacdata->phy_map = 0x0000ffff; /* Skip 0x00-0x0f */
-			emacdata->phy_mode = PHY_MODE_RGMII;
-		}
-		if (i == 0)
-			memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-		else if (i == 1)
-			memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
-		else if (i == 2)
-			memcpy(emacdata->mac_addr, __res.bi_enet2addr, 6);
-		else if (i == 3)
-			memcpy(emacdata->mac_addr, __res.bi_enet3addr, 6);
-	}
-}
-
-#define PCIX_READW(offset) \
-	(readw(pcix_reg_base+offset))
-
-#define PCIX_WRITEW(value, offset) \
-	(writew(value, pcix_reg_base+offset))
-
-#define PCIX_WRITEL(value, offset) \
-	(writel(value, pcix_reg_base+offset))
-
-/*
- * FIXME: This is only here to "make it work".  This will move
- * to a ibm_pcix.c which will contain a generic IBM PCIX bridge
- * configuration library. -Matt
- */
-static void __init
-ocotea_setup_pcix(void)
-{
-	void *pcix_reg_base;
-
-	pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE);
-
-	/* Enable PCIX0 I/O, Mem, and Busmaster cycles */
-	PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
-
-	/* Disable all windows */
-	PCIX_WRITEL(0, PCIX0_POM0SA);
-	PCIX_WRITEL(0, PCIX0_POM1SA);
-	PCIX_WRITEL(0, PCIX0_POM2SA);
-	PCIX_WRITEL(0, PCIX0_PIM0SA);
-	PCIX_WRITEL(0, PCIX0_PIM0SAH);
-	PCIX_WRITEL(0, PCIX0_PIM1SA);
-	PCIX_WRITEL(0, PCIX0_PIM2SA);
-	PCIX_WRITEL(0, PCIX0_PIM2SAH);
-
-	/* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
-	PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
-	PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
-	PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
-
-	/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
-	PCIX_WRITEL(0x80000007, PCIX0_PIM0SA);
-
-	eieio();
-}
-
-static void __init
-ocotea_setup_hose(void)
-{
-	struct pci_controller *hose;
-
-	/* Configure windows on the PCI-X host bridge */
-	ocotea_setup_pcix();
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	hose->pci_mem_offset = OCOTEA_PCI_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			OCOTEA_PCI_LOWER_IO,
-			OCOTEA_PCI_UPPER_IO,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			OCOTEA_PCI_LOWER_MEM,
-			OCOTEA_PCI_UPPER_MEM,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = OCOTEA_PCI_LOWER_IO;
-	hose->io_space.end = OCOTEA_PCI_UPPER_IO;
-	hose->mem_space.start = OCOTEA_PCI_LOWER_MEM;
-	hose->mem_space.end = OCOTEA_PCI_UPPER_MEM;
-	hose->io_base_virt = ioremap64(OCOTEA_PCI_IO_BASE, OCOTEA_PCI_IO_SIZE);
-	isa_io_base = (unsigned long) hose->io_base_virt;
-
-	setup_indirect_pci(hose,
-			OCOTEA_PCI_CFGA_PLB32,
-			OCOTEA_PCI_CFGD_PLB32);
-	hose->set_cfg_type = 1;
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ocotea_map_irq;
-}
-
-
-TODC_ALLOC();
-
-static void __init
-ocotea_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440GX_UART0_ADDR, 8);
-	port.irq = UART0_INT;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(0, &port);
-
-	/* Purge TLB entry added in head_44x.S for early serial access */
-	_tlbie(UART0_IO_BASE, 0);
-#endif
-
-	port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
-	port.irq = UART1_INT;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(1, &port);
-#endif
-}
-
-static void __init
-ocotea_setup_arch(void)
-{
-	ocotea_set_emacdata();
-
-	ibm440gx_tah_enable();
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	ibm440gx_get_clocks(&clocks, 33300000, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* Setup TODC access */
-	TODC_INIT(TODC_TYPE_DS1743,
-			0,
-			0,
-			ioremap64(OCOTEA_RTC_ADDR, OCOTEA_RTC_SIZE),
-			8);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-        loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCI host bridge */
-	ocotea_setup_hose();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	ocotea_early_serial_map();
-
-	/* Identify the system */
-	printk("IBM Ocotea port (MontaVista Software, Inc. <source@mvista.com>)\n");
-}
-
-static void __init ocotea_init(void)
-{
-	ibm440gx_l2c_setup(&clocks);
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm440gx_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = ocotea_setup_arch;
-	ppc_md.show_cpuinfo = ocotea_show_cpuinfo;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = ocotea_calibrate_decr;
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = ocotea_early_serial_map;
-#endif
-	ppc_md.init = ocotea_init;
-}
diff --git a/arch/ppc/platforms/4xx/ocotea.h b/arch/ppc/platforms/4xx/ocotea.h
deleted file mode 100644
index 89730ce2322c..000000000000
--- a/arch/ppc/platforms/4xx/ocotea.h
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Ocotea board definitions
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Copyright 2003-2005 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_OCOTEA_H__
-#define __ASM_OCOTEA_H__
-
-#include <platforms/4xx/ibm440gx.h>
-
-/* F/W TLB mapping used in bootloader glue to reset EMAC */
-#define PPC44x_EMAC0_MR0	0xe0000800
-
-/* Location of MAC addresses in PIBS image */
-#define PIBS_FLASH_BASE		0xfff00000
-#define PIBS_MAC_BASE		(PIBS_FLASH_BASE+0xb0500)
-#define PIBS_MAC_SIZE		0x200
-#define PIBS_MAC_OFFSET		0x100
-
-/* External timer clock frequency */
-#define OCOTEA_TMR_CLK	25000000
-
-/* RTC/NVRAM location */
-#define OCOTEA_RTC_ADDR		0x0000000148000000ULL
-#define OCOTEA_RTC_SIZE		0x2000
-
-/* Flash */
-#define OCOTEA_FPGA_REG_0		0x0000000148300000ULL
-#define OCOTEA_BOOT_LARGE_FLASH(x)	(x & 0x40)
-#define OCOTEA_SMALL_FLASH_LOW		0x00000001ff900000ULL
-#define OCOTEA_SMALL_FLASH_HIGH		0x00000001fff00000ULL
-#define OCOTEA_SMALL_FLASH_SIZE		0x100000
-#define OCOTEA_LARGE_FLASH_LOW		0x00000001ff800000ULL
-#define OCOTEA_LARGE_FLASH_HIGH		0x00000001ffc00000ULL
-#define OCOTEA_LARGE_FLASH_SIZE		0x400000
-
-/* FPGA_REG_3 (Ethernet Groups) */
-#define OCOTEA_FPGA_REG_3		0x0000000148300003ULL
-
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	2
-
-#if defined(__BOOTER__)
-/* OpenBIOS defined UART mappings, used by bootloader shim */
-#define UART0_IO_BASE	0xE0000200
-#define UART1_IO_BASE	0xE0000300
-#else
-/* head_44x.S created UART mapping, used before early_serial_setup.
- * We cannot use default OpenBIOS UART mappings because they
- * don't work for configurations with more than 512M RAM.    --ebs
- */
-#define UART0_IO_BASE	0xF0000200
-#define UART1_IO_BASE	0xF0000300
-#endif
-
-#define BASE_BAUD	11059200/16
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-
-/* PCI support */
-#define OCOTEA_PCI_LOWER_IO	0x00000000
-#define OCOTEA_PCI_UPPER_IO	0x0000ffff
-#define OCOTEA_PCI_LOWER_MEM	0x80000000
-#define OCOTEA_PCI_UPPER_MEM	0xffffefff
-
-#define OCOTEA_PCI_CFGREGS_BASE	0x000000020ec00000ULL
-#define OCOTEA_PCI_CFGA_PLB32	0x0ec00000
-#define OCOTEA_PCI_CFGD_PLB32	0x0ec00004
-
-#define OCOTEA_PCI_IO_BASE	0x0000000208000000ULL
-#define OCOTEA_PCI_IO_SIZE	0x00010000
-#define OCOTEA_PCI_MEM_OFFSET	0x00000000
-
-#endif				/* __ASM_OCOTEA_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/ppc440spe.c b/arch/ppc/platforms/4xx/ppc440spe.c
deleted file mode 100644
index 1be5d1c8e266..000000000000
--- a/arch/ppc/platforms/4xx/ppc440spe.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * PPC440SPe I/O descriptions
- *
- * Roland Dreier <rolandd@cisco.com>
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <platforms/4xx/ppc440spe.h>
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-
-static struct ocp_func_emac_data ppc440spe_emac0_def = {
-	.rgmii_idx	= -1,		/* No RGMII */
-	.rgmii_mux	= -1,		/* No RGMII */
-	.zmii_idx       = -1,           /* No ZMII */
-	.zmii_mux       = -1,           /* No ZMII */
-	.mal_idx        = 0,            /* MAL device index */
-	.mal_rx_chan    = 0,            /* MAL rx channel number */
-	.mal_tx_chan    = 0,            /* MAL tx channel number */
-	.wol_irq        = 61,  		/* WOL interrupt number */
-	.mdio_idx       = -1,           /* No shared MDIO */
-	.tah_idx	= -1,		/* No TAH */
-};
-OCP_SYSFS_EMAC_DATA()
-
-static struct ocp_func_mal_data ppc440spe_mal0_def = {
-	.num_tx_chans   = 1,    	/* Number of TX channels */
-	.num_rx_chans   = 1,    	/* Number of RX channels */
-	.txeob_irq	= 38,		/* TX End Of Buffer IRQ  */
-	.rxeob_irq	= 39,		/* RX End Of Buffer IRQ  */
-	.txde_irq	= 34,		/* TX Descriptor Error IRQ */
-	.rxde_irq	= 35,		/* RX Descriptor Error IRQ */
-	.serr_irq	= 33,		/* MAL System Error IRQ    */
-	.dcr_base	= DCRN_MAL_BASE /* MAL0_CFG DCR number */
-};
-OCP_SYSFS_MAL_DATA()
-
-static struct ocp_func_iic_data ppc440spe_iic0_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-
-static struct ocp_func_iic_data ppc440spe_iic1_def = {
-	.fast_mode	= 0,		/* Use standad mode (100Khz) */
-};
-OCP_SYSFS_IIC_DATA()
-
-struct ocp_def core_ocp[] = {
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 0,
-	  .paddr	= PPC440SPE_UART0_ADDR,
-	  .irq		= UART0_INT,
-	  .pm		= IBM_CPM_UART0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 1,
-	  .paddr	= PPC440SPE_UART1_ADDR,
-	  .irq		= UART1_INT,
-	  .pm		= IBM_CPM_UART1,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_16550,
-	  .index	= 2,
-	  .paddr	= PPC440SPE_UART2_ADDR,
-	  .irq		= UART2_INT,
-	  .pm		= IBM_CPM_UART2,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 0,
-	  .paddr	= 0x00000004f0000400ULL,
-	  .irq		= 2,
-	  .pm		= IBM_CPM_IIC0,
-	  .additions	= &ppc440spe_iic0_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_IIC,
-	  .index	= 1,
-	  .paddr	= 0x00000004f0000500ULL,
-	  .irq		= 3,
-	  .pm		= IBM_CPM_IIC1,
-	  .additions	= &ppc440spe_iic1_def,
-	  .show		= &ocp_show_iic_data
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_GPIO,
-	  .index	= 0,
-	  .paddr	= 0x00000004f0000700ULL,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= IBM_CPM_GPIO0,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_MAL,
-	  .paddr	= OCP_PADDR_NA,
-	  .irq		= OCP_IRQ_NA,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ppc440spe_mal0_def,
-	  .show		= &ocp_show_mal_data,
-	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_EMAC,
-	  .index	= 0,
-	  .paddr	= 0x00000004f0000800ULL,
-	  .irq		= 60,
-	  .pm		= OCP_CPM_NA,
-	  .additions	= &ppc440spe_emac0_def,
-	  .show		= &ocp_show_emac_data,
-	},
-	{ .vendor	= OCP_VENDOR_INVALID
-	}
-};
-
-/* Polarity and triggering settings for internal interrupt sources */
-struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
-	{ .polarity     = 0xffffffff,
-	  .triggering   = 0x010f0004,
-	  .ext_irq_mask = 0x00000000,
-	},
-	{ .polarity     = 0xffffffff,
-	  .triggering   = 0x001f8040,
-	  .ext_irq_mask = 0x00007c30,   /* IRQ6 - IRQ7, IRQ8 - IRQ12 */
-	},
-	{ .polarity     = 0xffffffff,
-	  .triggering   = 0x00000000,
-	  .ext_irq_mask = 0x000000fc,   /* IRQ0 - IRQ5 */
-	},
-	{ .polarity     = 0xffffffff,
-	  .triggering   = 0x00000000,
-	  .ext_irq_mask = 0x00000000,
-	},
-};
diff --git a/arch/ppc/platforms/4xx/ppc440spe.h b/arch/ppc/platforms/4xx/ppc440spe.h
deleted file mode 100644
index f1e867c4c9fc..000000000000
--- a/arch/ppc/platforms/4xx/ppc440spe.h
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * PPC440SPe definitions
- *
- * Roland Dreier <rolandd@cisco.com>
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2004-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifdef __KERNEL__
-#ifndef __PPC_PLATFORMS_PPC440SPE_H
-#define __PPC_PLATFORMS_PPC440SPE_H
-
-
-#include <asm/ibm44x.h>
-
-/* UART */
-#define PPC440SPE_UART0_ADDR	0x00000004f0000200ULL
-#define PPC440SPE_UART1_ADDR	0x00000004f0000300ULL
-#define PPC440SPE_UART2_ADDR	0x00000004f0000600ULL
-#define UART0_INT		0
-#define UART1_INT		1
-#define UART2_INT		37
-
-/* Clock and Power Management */
-#define IBM_CPM_IIC0		0x80000000	/* IIC interface */
-#define IBM_CPM_IIC1		0x40000000	/* IIC interface */
-#define IBM_CPM_PCI		0x20000000	/* PCI bridge */
-#define IBM_CPM_CPU		    0x02000000	/* processor core */
-#define IBM_CPM_DMA		    0x01000000	/* DMA controller */
-#define IBM_CPM_BGO		    0x00800000	/* PLB to OPB bus arbiter */
-#define IBM_CPM_BGI		    0x00400000	/* OPB to PLB bridge */
-#define IBM_CPM_EBC		    0x00200000	/* External Bux Controller */
-#define IBM_CPM_EBM		    0x00100000	/* Ext Bus Master Interface */
-#define IBM_CPM_DMC		    0x00080000	/* SDRAM peripheral controller */
-#define IBM_CPM_PLB		    0x00040000	/* PLB bus arbiter */
-#define IBM_CPM_SRAM		0x00020000	/* SRAM memory controller */
-#define IBM_CPM_PPM		    0x00002000	/* PLB Performance Monitor */
-#define IBM_CPM_UIC1		0x00001000	/* Universal Interrupt Controller */
-#define IBM_CPM_GPIO0		0x00000800	/* General Purpose IO (??) */
-#define IBM_CPM_GPT		    0x00000400	/* General Purpose Timers  */
-#define IBM_CPM_UART0		0x00000200	/* serial port 0 */
-#define IBM_CPM_UART1		0x00000100	/* serial port 1 */
-#define IBM_CPM_UART2		0x00000100	/* serial port 1 */
-#define IBM_CPM_UIC0		0x00000080	/* Universal Interrupt Controller */
-#define IBM_CPM_TMRCLK		0x00000040	/* CPU timers */
-#define IBM_CPM_EMAC0  		0x00000020	/* EMAC 0     */
-
-#define DFLT_IBM4xx_PM		~(IBM_CPM_UIC | IBM_CPM_UIC1 | IBM_CPM_CPU \
-				| IBM_CPM_EBC | IBM_CPM_SRAM | IBM_CPM_BGO \
-				| IBM_CPM_EBM | IBM_CPM_PLB | IBM_CPM_OPB \
-				| IBM_CPM_TMRCLK | IBM_CPM_DMA | IBM_CPM_PCI \
-				| IBM_CPM_TAHOE0 | IBM_CPM_TAHOE1 \
-				| IBM_CPM_EMAC0 | IBM_CPM_EMAC1 \
-			  	| IBM_CPM_EMAC2 | IBM_CPM_EMAC3 )
-#endif /* __PPC_PLATFORMS_PPC440SP_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/redwood5.c b/arch/ppc/platforms/4xx/redwood5.c
deleted file mode 100644
index edf4d37d1a52..000000000000
--- a/arch/ppc/platforms/4xx/redwood5.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Support for the IBM redwood5 eval board file
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/pagemap.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ppc4xx_pic.h>
-
-/*
- * Define external IRQ senses and polarities.
- */
-unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 4 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 5 */
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= SMC91111_BASE_ADDR,
-		.end	= SMC91111_BASE_ADDR + SMC91111_REG_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= SMC91111_IRQ,
-		.end	= SMC91111_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *redwood5_devs[] __initdata = {
-	&smc91x_device,
-};
-
-static int __init
-redwood5_platform_add_devices(void)
-{
-	return platform_add_devices(redwood5_devs, ARRAY_SIZE(redwood5_devs));
-}
-
-void __init
-redwood5_setup_arch(void)
-{
-	ppc4xx_setup_arch();
-
-#ifdef CONFIG_DEBUG_BRINGUP
-	printk("\n");
-	printk("machine\t: %s\n", PPC4xx_MACHINE_NAME);
-	printk("\n");
-	printk("bi_s_version\t %s\n",      bip->bi_s_version);
-	printk("bi_r_version\t %s\n",      bip->bi_r_version);
-	printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize,bip->bi_memsize/(1024*1000));
-	printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0,
-	bip->bi_enetaddr[0], bip->bi_enetaddr[1],
-	bip->bi_enetaddr[2], bip->bi_enetaddr[3],
-	bip->bi_enetaddr[4], bip->bi_enetaddr[5]);
-
-	printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n",
-	       bip->bi_intfreq, bip->bi_intfreq/ 1000000);
-
-	printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n",
-		bip->bi_busfreq, bip->bi_busfreq / 1000000 );
-	printk("bi_tbfreq\t 0x%8.8x\t TB freq:\t %dMHz\n",
-	       bip->bi_tbfreq, bip->bi_tbfreq/1000000);
-
-	printk("\n");
-#endif
-	device_initcall(redwood5_platform_add_devices);
-}
-
-void __init
-redwood5_map_io(void)
-{
-	int i;
-
-	ppc4xx_map_io();
-	for (i = 0; i < 16; i++) {
-	 unsigned long v, p;
-
-	/* 0x400x0000 -> 0xe00x0000 */
-	p = 0x40000000 | (i << 16);
-	v = STB04xxx_IO_BASE | (i << 16);
-
-	io_block_mapping(v, p, PAGE_SIZE,
-		 _PAGE_NO_CACHE | pgprot_val(PAGE_KERNEL) | _PAGE_GUARDED);
-	}
-
-
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = redwood5_setup_arch;
-	ppc_md.setup_io_mappings = redwood5_map_io;
-}
diff --git a/arch/ppc/platforms/4xx/redwood5.h b/arch/ppc/platforms/4xx/redwood5.h
deleted file mode 100644
index 49edd4818970..000000000000
--- a/arch/ppc/platforms/4xx/redwood5.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Macros, definitions, and data structures specific to the IBM PowerPC
- * STB03xxx "Redwood" evaluation board.
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_REDWOOD5_H__
-#define __ASM_REDWOOD5_H__
-
-/* Redwood5 has an STB04xxx core */
-#include <platforms/4xx/ibmstb4.h>
-
-#ifndef __ASSEMBLY__
-typedef struct board_info {
-	unsigned char	bi_s_version[4];	/* Version of this structure */
-	unsigned char	bi_r_version[30];	/* Version of the IBM ROM */
-	unsigned int	bi_memsize;		/* DRAM installed, in bytes */
-	unsigned int	bi_dummy;		/* field shouldn't exist */
-	unsigned char	bi_enetaddr[6];		/* Ethernet MAC address */
-	unsigned int	bi_intfreq;		/* Processor speed, in Hz */
-	unsigned int	bi_busfreq;		/* Bus speed, in Hz */
-	unsigned int	bi_tbfreq;		/* Software timebase freq */
-} bd_t;
-#endif /* !__ASSEMBLY__ */
-
-
-#define SMC91111_BASE_ADDR	0xf2000300
-#define SMC91111_REG_SIZE	16
-#define SMC91111_IRQ		28
-
-#ifdef MAX_HWIFS
-#undef MAX_HWIFS
-#endif
-#define MAX_HWIFS		1
-
-#define _IO_BASE	0
-#define _ISA_MEM_BASE	0
-#define PCI_DRAM_OFFSET	0
-
-#define BASE_BAUD		(378000000 / 18 / 16)
-
-#define PPC4xx_MACHINE_NAME	"IBM Redwood5"
-
-#endif /* __ASM_REDWOOD5_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/redwood6.c b/arch/ppc/platforms/4xx/redwood6.c
deleted file mode 100644
index 006e29f83a1a..000000000000
--- a/arch/ppc/platforms/4xx/redwood6.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/pagemap.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <asm/io.h>
-#include <asm/ppc4xx_pic.h>
-#include <linux/delay.h>
-#include <asm/machdep.h>
-
-/*
- * Define external IRQ senses and polarities.
- */
-unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 7 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 8 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 9 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 4 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 5 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 6 */
-};
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= SMC91111_BASE_ADDR,
-		.end	= SMC91111_BASE_ADDR + SMC91111_REG_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= SMC91111_IRQ,
-		.end	= SMC91111_IRQ,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct platform_device *redwood6_devs[] __initdata = {
-	&smc91x_device,
-};
-
-static int __init
-redwood6_platform_add_devices(void)
-{
-	return platform_add_devices(redwood6_devs, ARRAY_SIZE(redwood6_devs));
-}
-
-
-void __init
-redwood6_setup_arch(void)
-{
-#ifdef CONFIG_IDE
-	void *xilinx, *xilinx_1, *xilinx_2;
-	unsigned short us_reg5;
-#endif
-
-	ppc4xx_setup_arch();
-
-#ifdef CONFIG_IDE
-	xilinx = (unsigned long) ioremap(IDE_XLINUX_MUX_BASE, 0x10);
-	/* init xilinx control registers - enable ide mux, clear reset bit */
-	if (!xilinx) {
-		printk(KERN_CRIT
-		       "redwood6_setup_arch() xilinxi ioremap failed\n");
-		return;
-	}
-	xilinx_1 = xilinx + 0xa;
-	xilinx_2 = xilinx + 0xe;
-
-	us_reg5 = readb(xilinx_1);
-	writeb(0x01d1, xilinx_1);
-	writeb(0x0008, xilinx_2);
-
-	udelay(10 * 1000);
-
-	writeb(0x01d1, xilinx_1);
-	writeb(0x0008, xilinx_2);
-#endif
-
-#ifdef DEBUG_BRINGUP
-	bd_t *bip = (bd_t *) __res;
-	printk("\n");
-	printk("machine\t: %s\n", PPC4xx_MACHINE_NAME);
-	printk("\n");
-	printk("bi_s_version\t %s\n", bip->bi_s_version);
-	printk("bi_r_version\t %s\n", bip->bi_r_version);
-	printk("bi_memsize\t 0x%8.8x\t %dMBytes\n", bip->bi_memsize,
-	       bip->bi_memsize / (1024 * 1000));
-	printk("bi_enetaddr %d\t %2.2x%2.2x%2.2x-%2.2x%2.2x%2.2x\n", 0,
-	       bip->bi_enetaddr[0], bip->bi_enetaddr[1], bip->bi_enetaddr[2],
-	       bip->bi_enetaddr[3], bip->bi_enetaddr[4], bip->bi_enetaddr[5]);
-
-	printk("bi_intfreq\t 0x%8.8x\t clock:\t %dMhz\n",
-	       bip->bi_intfreq, bip->bi_intfreq / 1000000);
-
-	printk("bi_busfreq\t 0x%8.8x\t plb bus clock:\t %dMHz\n",
-	       bip->bi_busfreq, bip->bi_busfreq / 1000000);
-	printk("bi_tbfreq\t 0x%8.8x\t TB freq:\t %dMHz\n",
-	       bip->bi_tbfreq, bip->bi_tbfreq / 1000000);
-
-	printk("\n");
-#endif
-
-	/* Identify the system */
-	printk(KERN_INFO "IBM Redwood6 (STBx25XX) Platform\n");
-	printk(KERN_INFO
-	       "Port by MontaVista Software, Inc. (source@mvista.com)\n");
-
-	device_initcall(redwood6_platform_add_devices);
-}
-
-void __init
-redwood6_map_io(void)
-{
-	int i;
-
-	ppc4xx_map_io();
-	for (i = 0; i < 16; i++) {
-		unsigned long v, p;
-
-		/* 0x400x0000 -> 0xe00x0000 */
-		p = 0x40000000 | (i << 16);
-		v = STBx25xx_IO_BASE | (i << 16);
-
-		io_block_mapping(v, p, PAGE_SIZE,
-				 _PAGE_NO_CACHE | pgprot_val(PAGE_KERNEL) |
-				 _PAGE_GUARDED);
-	}
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = redwood6_setup_arch;
-	ppc_md.setup_io_mappings = redwood6_map_io;
-}
diff --git a/arch/ppc/platforms/4xx/redwood6.h b/arch/ppc/platforms/4xx/redwood6.h
deleted file mode 100644
index 1edcbe5c51c7..000000000000
--- a/arch/ppc/platforms/4xx/redwood6.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Macros, definitions, and data structures specific to the IBM PowerPC
- * STBx25xx "Redwood6" evaluation board.
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_REDWOOD5_H__
-#define __ASM_REDWOOD5_H__
-
-/* Redwood6 has an STBx25xx core */
-#include <platforms/4xx/ibmstbx25.h>
-
-#ifndef __ASSEMBLY__
-typedef struct board_info {
-	unsigned char bi_s_version[4];	/* Version of this structure */
-	unsigned char bi_r_version[30];	/* Version of the IBM ROM */
-	unsigned int bi_memsize;	/* DRAM installed, in bytes */
-	unsigned int bi_dummy;	/* field shouldn't exist */
-	unsigned char bi_enetaddr[6];	/* Ethernet MAC address */
-	unsigned int bi_intfreq;	/* Processor speed, in Hz */
-	unsigned int bi_busfreq;	/* Bus speed, in Hz */
-	unsigned int bi_tbfreq;	/* Software timebase freq */
-} bd_t;
-#endif				/* !__ASSEMBLY__ */
-
-#define SMC91111_BASE_ADDR	0xf2030300
-#define SMC91111_REG_SIZE	16
-#define SMC91111_IRQ		27
-#define IDE_XLINUX_MUX_BASE        0xf2040000
-#define IDE_DMA_ADDR	0xfce00000
-
-#ifdef MAX_HWIFS
-#undef MAX_HWIFS
-#endif
-#define MAX_HWIFS		1
-
-#define _IO_BASE	0
-#define _ISA_MEM_BASE	0
-#define PCI_DRAM_OFFSET	0
-
-#define BASE_BAUD		(378000000 / 18 / 16)
-
-#define PPC4xx_MACHINE_NAME	"IBM Redwood6"
-
-#endif				/* __ASM_REDWOOD5_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/sycamore.c b/arch/ppc/platforms/4xx/sycamore.c
deleted file mode 100644
index 8689f3e8ef3a..000000000000
--- a/arch/ppc/platforms/4xx/sycamore.c
+++ /dev/null
@@ -1,272 +0,0 @@
-/*
- * Architecture- / platform-specific boot-time initialization code for
- * IBM PowerPC 4xx based boards.
- *
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2000-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/rtc.h>
-
-#include <asm/ocp.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/ibm_ocp_pci.h>
-#include <asm/todc.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-void *kb_cs;
-void *kb_data;
-void *sycamore_rtc_base;
-
-/*
- * Define external IRQ senses and polarities.
- */
-unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 7 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 8 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 9 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 10 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 11 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 12 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 4 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 5 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 6 */
-};
-
-
-/* Some IRQs unique to Sycamore.
- * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
- */
-int __init
-ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *      A       B       C       D
-	     */
-	{
-		{28, 28, 28, 28},	/* IDSEL 1 - PCI slot 1 */
-		{29, 29, 29, 29},	/* IDSEL 2 - PCI slot 2 */
-		{30, 30, 30, 30},	/* IDSEL 3 - PCI slot 3 */
-		{31, 31, 31, 31},	/* IDSEL 4 - PCI slot 4 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-void __init
-sycamore_setup_arch(void)
-{
-	void *fpga_brdc;
-	unsigned char fpga_brdc_data;
-	void *fpga_enable;
-	void *fpga_polarity;
-	void *fpga_status;
-	void *fpga_trigger;
-
-	ppc4xx_setup_arch();
-
-	ibm_ocp_set_emac(0, 0);
-
-	kb_data = ioremap(SYCAMORE_PS2_BASE, 8);
-	if (!kb_data) {
-		printk(KERN_CRIT
-		       "sycamore_setup_arch() kb_data ioremap failed\n");
-		return;
-	}
-
-	kb_cs = kb_data + 1;
-
-	fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
-	if (!fpga_status) {
-		printk(KERN_CRIT
-		       "sycamore_setup_arch() fpga_status ioremap failed\n");
-		return;
-	}
-
-	fpga_enable = fpga_status + 1;
-	fpga_polarity = fpga_status + 2;
-	fpga_trigger = fpga_status + 3;
-	fpga_brdc = fpga_status + 4;
-
-	/* split the keyboard and mouse interrupts */
-	fpga_brdc_data = readb(fpga_brdc);
-	fpga_brdc_data |= 0x80;
-	writeb(fpga_brdc_data, fpga_brdc);
-
-	writeb(0x3, fpga_enable);
-
-	writeb(0x3, fpga_polarity);
-
-	writeb(0x3, fpga_trigger);
-
-	/* RTC step for the sycamore */
-	sycamore_rtc_base = (void *) SYCAMORE_RTC_VADDR;
-	TODC_INIT(TODC_TYPE_DS1743, sycamore_rtc_base, sycamore_rtc_base,
-		  sycamore_rtc_base, 8);
-
-	/* Identify the system */
-	printk(KERN_INFO "IBM Sycamore (IBM405GPr) Platform\n");
-	printk(KERN_INFO
-	       "Port by MontaVista Software, Inc. (source@mvista.com)\n");
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
-#ifdef CONFIG_PCI
-	unsigned int bar_response, bar;
-	/*
-	 * Expected PCI mapping:
-	 *
-	 *  PLB addr             PCI memory addr
-	 *  ---------------------       ---------------------
-	 *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
-	 *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
-	 *
-	 *  PLB addr             PCI io addr
-	 *  ---------------------       ---------------------
-	 *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
-	 *
-	 * The following code is simplified by assuming that the bootrom
-	 * has been well behaved in following this mapping.
-	 */
-
-#ifdef DEBUG
-	int i;
-
-	printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
-	printk("PCI bridge regs before fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-
-	/* added for IBM boot rom version 1.15 bios bar changes  -AK */
-
-	/* Disable region first */
-	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
-	/* PLB starting addr, PCI: 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
-	/* PCI start addr, 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
-	/* 512MB range of PLB to PCI */
-	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
-	/* Enable no pre-fetch, enable region */
-	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
-						(PPC405_PCI_UPPER_MEM -
-						 PPC405_PCI_MEM_BASE)) | 0x01));
-
-	/* Enable inbound region one - 1GB size */
-	out_le32((void *) &(pcip->ptm1ms), 0xc0000001);
-
-	/* Disable outbound region one */
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-
-	/* Disable inbound region two */
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-
-	/* Disable outbound region two */
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-		DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
-		    hose->first_busno, PCI_SLOT(hose->first_busno),
-		    PCI_FUNC(hose->first_busno), bar, bar_response);
-	}
-	/* end workaround */
-
-#ifdef DEBUG
-	printk("PCI bridge regs after fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-#endif
-
-}
-
-void __init
-sycamore_map_io(void)
-{
-	ppc4xx_map_io();
-	io_block_mapping(SYCAMORE_RTC_VADDR,
-			 SYCAMORE_RTC_PADDR, SYCAMORE_RTC_SIZE, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = sycamore_setup_arch;
-	ppc_md.setup_io_mappings = sycamore_map_io;
-
-#ifdef CONFIG_GEN_RTC
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#endif
-}
diff --git a/arch/ppc/platforms/4xx/sycamore.h b/arch/ppc/platforms/4xx/sycamore.h
deleted file mode 100644
index 69b169eac053..000000000000
--- a/arch/ppc/platforms/4xx/sycamore.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * Sycamore board definitions
- *
- * Copyright (c) 2005 DENX Software Engineering
- * Stefan Roese <sr@denx.de>
- *
- * Based on original work by
- * 	Armin Kuster <akuster@mvista.com>
- *	2000 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_SYCAMORE_H__
-#define __ASM_SYCAMORE_H__
-
-#include <platforms/4xx/ibm405gpr.h>
-#include <asm/ppcboot.h>
-
-/* Memory map for the IBM "Sycamore" 405GPr evaluation board.
- * Generic 4xx plus RTC.
- */
-
-#define SYCAMORE_RTC_PADDR	((uint)0xf0000000)
-#define SYCAMORE_RTC_VADDR	SYCAMORE_RTC_PADDR
-#define SYCAMORE_RTC_SIZE	((uint)8*1024)
-
-#define BASE_BAUD		691200
-
-#define SYCAMORE_PS2_BASE	0xF0100000
-
-/* Flash */
-#define PPC40x_FPGA_BASE	0xF0300000
-#define PPC40x_FPGA_REG_OFFS	5	/* offset to flash map reg */
-#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
-#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
-#define PPC40x_FLASH_LOW	0xFFF00000
-#define PPC40x_FLASH_HIGH	0xFFF80000
-#define PPC40x_FLASH_SIZE	0x80000
-
-#define PPC4xx_MACHINE_NAME	"IBM Sycamore"
-
-#endif /* __ASM_SYCAMORE_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c
deleted file mode 100644
index 115694275083..000000000000
--- a/arch/ppc/platforms/4xx/taishan.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/taishan.c
- *
- * AMCC Taishan board specific routines
- *
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/ndfc.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/bootinfo.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/gen550.h>
-#include <syslib/ibm440gx_common.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-/*
- * NOR FLASH configuration (using mtd physmap driver)
- */
-
-/* start will be added dynamically, end is always fixed */
-static struct resource taishan_nor_resource = {
-	.start = TAISHAN_FLASH_ADDR,
-	.end   = 0x1ffffffffULL,
-	.flags = IORESOURCE_MEM,
-};
-
-#define RW_PART0_OF	0
-#define RW_PART0_SZ	0x180000
-#define RW_PART1_SZ	0x200000
-/* Partition 2 will be autosized dynamically... */
-#define RW_PART3_SZ	0x80000
-#define RW_PART4_SZ	0x40000
-
-static struct mtd_partition taishan_nor_parts[] = {
-	{
-		.name = "kernel",
-		.offset = 0,
-		.size = RW_PART0_SZ
-	},
-	{
-		.name = "root",
-		.offset = MTDPART_OFS_APPEND,
-		.size = RW_PART1_SZ,
-	},
-	{
-		.name = "user",
-		.offset = MTDPART_OFS_APPEND,
-/*		.size = RW_PART2_SZ */ /* will be adjusted dynamically */
-	},
-	{
-		.name = "env",
-		.offset = MTDPART_OFS_APPEND,
-		.size = RW_PART3_SZ,
-	},
-	{
-		.name = "u-boot",
-		.offset = MTDPART_OFS_APPEND,
-		.size = RW_PART4_SZ,
-	}
-};
-
-static struct physmap_flash_data taishan_nor_data = {
-	.width		= 4,
-	.parts		= taishan_nor_parts,
-	.nr_parts	= ARRAY_SIZE(taishan_nor_parts),
-};
-
-static struct platform_device taishan_nor_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-			.platform_data = &taishan_nor_data,
-		},
-	.num_resources	= 1,
-	.resource	= &taishan_nor_resource,
-};
-
-static int taishan_setup_flash(void)
-{
-	/*
-	 * Adjust partition 2 to flash size
-	 */
-	taishan_nor_parts[2].size = __res.bi_flashsize -
-		RW_PART0_SZ - RW_PART1_SZ - RW_PART3_SZ - RW_PART4_SZ;
-
-	platform_device_register(&taishan_nor_device);
-
-	return 0;
-}
-arch_initcall(taishan_setup_flash);
-
-static void __init
-taishan_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	if (mfspr(SPRN_CCR1) & CCR1_TCS)
-		freq = TAISHAN_TMR_CLK;
-	else
-		freq = clocks.cpu;
-
-	ibm44x_calibrate_decr(freq);
-}
-
-static int
-taishan_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: AMCC\n");
-	seq_printf(m, "machine\t\t: PPC440GX EVB (Taishan)\n");
-	ibm440gx_show_cpuinfo(m);
-	return 0;
-}
-
-static inline int
-taishan_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 23, 24, 25, 26 },	/* IDSEL 1 - PCI Slot 0 */
-		{ 24, 25, 26, 23 },	/* IDSEL 2 - PCI Slot 1 */
-	};
-
-	const long min_idsel = 1, max_idsel = 2, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __init taishan_set_emacdata(void)
-{
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-	int i;
-
-	/* Set phy_map, phy_mode, and mac_addr for each EMAC */
-	for (i=2; i<4; i++) {
-		def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, i);
-		emacdata = def->additions;
-		if (i < 2) {
-			emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-			emacdata->phy_mode = PHY_MODE_SMII;
-		} else {
-			emacdata->phy_map = 0x00000001; /* Skip 0x00 */
-			emacdata->phy_mode = PHY_MODE_RGMII;
-		}
-		if (i == 0)
-			memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6);
-		else if (i == 1)
-			memcpy(emacdata->mac_addr, "\0\0\0\0\0\0", 6);
-		else if (i == 2)
-			memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-		else if (i == 3)
-			memcpy(emacdata->mac_addr, __res.bi_enet1addr, 6);
-	}
-}
-
-#define PCIX_READW(offset) \
-	(readw(pcix_reg_base+offset))
-
-#define PCIX_WRITEW(value, offset) \
-	(writew(value, pcix_reg_base+offset))
-
-#define PCIX_WRITEL(value, offset) \
-	(writel(value, pcix_reg_base+offset))
-
-/*
- * FIXME: This is only here to "make it work".  This will move
- * to a ibm_pcix.c which will contain a generic IBM PCIX bridge
- * configuration library. -Matt
- */
-static void __init
-taishan_setup_pcix(void)
-{
-	void *pcix_reg_base;
-
-	pcix_reg_base = ioremap64(PCIX0_REG_BASE, PCIX_REG_SIZE);
-
-	/* Enable PCIX0 I/O, Mem, and Busmaster cycles */
-	PCIX_WRITEW(PCIX_READW(PCIX0_COMMAND) | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER, PCIX0_COMMAND);
-
-	/* Disable all windows */
-	PCIX_WRITEL(0, PCIX0_POM0SA);
-	PCIX_WRITEL(0, PCIX0_POM1SA);
-	PCIX_WRITEL(0, PCIX0_POM2SA);
-	PCIX_WRITEL(0, PCIX0_PIM0SA);
-	PCIX_WRITEL(0, PCIX0_PIM0SAH);
-	PCIX_WRITEL(0, PCIX0_PIM1SA);
-	PCIX_WRITEL(0, PCIX0_PIM2SA);
-	PCIX_WRITEL(0, PCIX0_PIM2SAH);
-
-	/* Setup 2GB PLB->PCI outbound mem window (3_8000_0000->0_8000_0000) */
-	PCIX_WRITEL(0x00000003, PCIX0_POM0LAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0LAL);
-	PCIX_WRITEL(0x00000000, PCIX0_POM0PCIAH);
-	PCIX_WRITEL(0x80000000, PCIX0_POM0PCIAL);
-	PCIX_WRITEL(0x80000001, PCIX0_POM0SA);
-
-	/* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH);
-	PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL);
-	PCIX_WRITEL(0x80000007, PCIX0_PIM0SA);
-	PCIX_WRITEL(0xffffffff, PCIX0_PIM0SAH);
-
-	iounmap(pcix_reg_base);
-
-	eieio();
-}
-
-static void __init
-taishan_setup_hose(void)
-{
-	struct pci_controller *hose;
-
-	/* Configure windows on the PCI-X host bridge */
-	taishan_setup_pcix();
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	hose->pci_mem_offset = TAISHAN_PCI_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			TAISHAN_PCI_LOWER_IO,
-			TAISHAN_PCI_UPPER_IO,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			TAISHAN_PCI_LOWER_MEM,
-			TAISHAN_PCI_UPPER_MEM,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = TAISHAN_PCI_LOWER_IO;
-	hose->io_space.end = TAISHAN_PCI_UPPER_IO;
-	hose->mem_space.start = TAISHAN_PCI_LOWER_MEM;
-	hose->mem_space.end = TAISHAN_PCI_UPPER_MEM;
-	hose->io_base_virt = ioremap64(TAISHAN_PCI_IO_BASE, TAISHAN_PCI_IO_SIZE);
-	isa_io_base = (unsigned long) hose->io_base_virt;
-
-	setup_indirect_pci(hose,
-			TAISHAN_PCI_CFGA_PLB32,
-			TAISHAN_PCI_CFGD_PLB32);
-	hose->set_cfg_type = 1;
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = taishan_map_irq;
-}
-
-
-static void __init
-taishan_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440GX_UART0_ADDR, 8);
-	port.irq = UART0_INT;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0)
-		printk("Early serial init of port 0 failed\n");
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(0, &port);
-
-	/* Purge TLB entry added in head_44x.S for early serial access */
-	_tlbie(UART0_IO_BASE, 0);
-#endif
-
-	port.membase = ioremap64(PPC440GX_UART1_ADDR, 8);
-	port.irq = UART1_INT;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0)
-		printk("Early serial init of port 1 failed\n");
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	/* Configure debug serial access */
-	gen550_init(1, &port);
-#endif
-}
-
-static void __init
-taishan_setup_arch(void)
-{
-	taishan_set_emacdata();
-
-	ibm440gx_tah_enable();
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* init to some ~sane value until calibrate_delay() runs */
-        loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCI host bridge */
-	taishan_setup_hose();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	taishan_early_serial_map();
-
-	/* Identify the system */
-	printk("AMCC PowerPC 440GX Taishan Platform\n");
-}
-
-static void __init taishan_init(void)
-{
-	ibm440gx_l2c_setup(&clocks);
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = taishan_setup_arch;
-	ppc_md.show_cpuinfo = taishan_show_cpuinfo;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = taishan_calibrate_decr;
-
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = taishan_early_serial_map;
-#endif
-	ppc_md.init = taishan_init;
-}
-
diff --git a/arch/ppc/platforms/4xx/taishan.h b/arch/ppc/platforms/4xx/taishan.h
deleted file mode 100644
index ea7561a80457..000000000000
--- a/arch/ppc/platforms/4xx/taishan.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/taishan.h
- *
- * AMCC Taishan board definitions
- *
- * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_TAISHAN_H__
-#define __ASM_TAISHAN_H__
-
-#include <platforms/4xx/ibm440gx.h>
-
-/* External timer clock frequency */
-#define TAISHAN_TMR_CLK	25000000
-
-/* Flash */
-#define TAISHAN_FPGA_ADDR		0x0000000141000000ULL
-#define TAISHAN_LCM_ADDR		0x0000000142000000ULL
-#define TAISHAN_FLASH_ADDR		0x00000001fc000000ULL
-#define TAISHAN_FLASH_SIZE		0x4000000
-
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	2
-
-/* head_44x.S created UART mapping, used before early_serial_setup.
- * We cannot use default OpenBIOS UART mappings because they
- * don't work for configurations with more than 512M RAM.    --ebs
- */
-#define UART0_IO_BASE	0xF0000200
-#define UART1_IO_BASE	0xF0000300
-
-#define BASE_BAUD	11059200/16
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-
-/* PCI support */
-#define TAISHAN_PCI_LOWER_IO	0x00000000
-#define TAISHAN_PCI_UPPER_IO	0x0000ffff
-#define TAISHAN_PCI_LOWER_MEM	0x80000000
-#define TAISHAN_PCI_UPPER_MEM	0xffffefff
-
-#define TAISHAN_PCI_CFGA_PLB32	0x0ec00000
-#define TAISHAN_PCI_CFGD_PLB32	0x0ec00004
-
-#define TAISHAN_PCI_IO_BASE	0x0000000208000000ULL
-#define TAISHAN_PCI_IO_SIZE	0x00010000
-#define TAISHAN_PCI_MEM_OFFSET	0x00000000
-
-#endif				/* __ASM_TAISHAN_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h
deleted file mode 100644
index 738280420be5..000000000000
--- a/arch/ppc/platforms/4xx/virtex.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Basic Virtex platform defines, included by <asm/ibm4xx.h>
- *
- * 2005-2007 (c) Secret Lab Technologies Ltd.
- * 2002-2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_VIRTEX_H__
-#define __ASM_VIRTEX_H__
-
-#include <asm/ibm405.h>
-#include <asm/ppcboot.h>
-
-/* Ugly, ugly, ugly! BASE_BAUD defined here to keep 8250.c happy. */
-#if !defined(BASE_BAUD)
- #define BASE_BAUD		(0) /* dummy value; not used */
-#endif
-
-#ifndef __ASSEMBLY__
-extern const char* virtex_machine_name;
-#define PPC4xx_MACHINE_NAME (virtex_machine_name)
-#endif /* !__ASSEMBLY__ */
-
-/* We don't need anything mapped.  Size of zero will accomplish that. */
-#define PPC4xx_ONB_IO_PADDR	0u
-#define PPC4xx_ONB_IO_VADDR	0u
-#define PPC4xx_ONB_IO_SIZE	0u
-
-#endif				/* __ASM_VIRTEX_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/walnut.c b/arch/ppc/platforms/4xx/walnut.c
deleted file mode 100644
index 2f9772340854..000000000000
--- a/arch/ppc/platforms/4xx/walnut.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * Architecture- / platform-specific boot-time initialization code for
- * IBM PowerPC 4xx based boards. Adapted from original
- * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek
- * <dan@net4x.com>.
- *
- * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/pci.h>
-#include <linux/rtc.h>
-
-#include <asm/system.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/ocp.h>
-#include <asm/ibm_ocp_pci.h>
-#include <asm/todc.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
-void *kb_cs;
-void *kb_data;
-void *walnut_rtc_base;
-
-/* Some IRQs unique to Walnut.
- * Used by the generic 405 PCI setup functions in ppc4xx_pci.c
- */
-int __init
-ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *      A       B       C       D
-	     */
-	{
-		{28, 28, 28, 28},	/* IDSEL 1 - PCI slot 1 */
-		{29, 29, 29, 29},	/* IDSEL 2 - PCI slot 2 */
-		{30, 30, 30, 30},	/* IDSEL 3 - PCI slot 3 */
-		{31, 31, 31, 31},	/* IDSEL 4 - PCI slot 4 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-void __init
-walnut_setup_arch(void)
-{
-
-	void *fpga_brdc;
-	unsigned char fpga_brdc_data;
-	void *fpga_enable;
-	void *fpga_polarity;
-	void *fpga_status;
-	void *fpga_trigger;
-
-	ppc4xx_setup_arch();
-
-	ibm_ocp_set_emac(0, 0);
-
-	kb_data = ioremap(WALNUT_PS2_BASE, 8);
-	if (!kb_data) {
-		printk(KERN_CRIT
-		       "walnut_setup_arch() kb_data ioremap failed\n");
-		return;
-	}
-
-	kb_cs = kb_data + 1;
-
-	fpga_status = ioremap(PPC40x_FPGA_BASE, 8);
-	if (!fpga_status) {
-		printk(KERN_CRIT
-		       "walnut_setup_arch() fpga_status ioremap failed\n");
-		return;
-	}
-
-	fpga_enable = fpga_status + 1;
-	fpga_polarity = fpga_status + 2;
-	fpga_trigger = fpga_status + 3;
-	fpga_brdc = fpga_status + 4;
-
-	/* split the keyboard and mouse interrupts */
-	fpga_brdc_data = readb(fpga_brdc);
-	fpga_brdc_data |= 0x80;
-	writeb(fpga_brdc_data, fpga_brdc);
-
-	writeb(0x3, fpga_enable);
-
-	writeb(0x3, fpga_polarity);
-
-	writeb(0x3, fpga_trigger);
-
-	/* RTC step for the walnut */
-	walnut_rtc_base = (void *) WALNUT_RTC_VADDR;
-	TODC_INIT(TODC_TYPE_DS1743, walnut_rtc_base, walnut_rtc_base,
-		  walnut_rtc_base, 8);
-	/* Identify the system */
-	printk("IBM Walnut port (C) 2000-2002 MontaVista Software, Inc. (source@mvista.com)\n");
-}
-
-void __init
-bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip)
-{
-#ifdef CONFIG_PCI
-	unsigned int bar_response, bar;
-	/*
-	 * Expected PCI mapping:
-	 *
-	 *  PLB addr             PCI memory addr
-	 *  ---------------------       ---------------------
-	 *  0000'0000 - 7fff'ffff <---  0000'0000 - 7fff'ffff
-	 *  8000'0000 - Bfff'ffff --->  8000'0000 - Bfff'ffff
-	 *
-	 *  PLB addr             PCI io addr
-	 *  ---------------------       ---------------------
-	 *  e800'0000 - e800'ffff --->  0000'0000 - 0001'0000
-	 *
-	 * The following code is simplified by assuming that the bootrom
-	 * has been well behaved in following this mapping.
-	 */
-
-#ifdef DEBUG
-	int i;
-
-	printk("ioremap PCLIO_BASE = 0x%x\n", pcip);
-	printk("PCI bridge regs before fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-
-	/* added for IBM boot rom version 1.15 bios bar changes  -AK */
-
-	/* Disable region first */
-	out_le32((void *) &(pcip->pmm[0].ma), 0x00000000);
-	/* PLB starting addr, PCI: 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].la), 0x80000000);
-	/* PCI start addr, 0x80000000 */
-	out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE);
-	/* 512MB range of PLB to PCI */
-	out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000);
-	/* Enable no pre-fetch, enable region */
-	out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff -
-						(PPC405_PCI_UPPER_MEM -
-						 PPC405_PCI_MEM_BASE)) | 0x01));
-
-	/* Disable region one */
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[1].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm1ms), 0x00000000);
-
-	/* Disable region two */
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].la), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000);
-	out_le32((void *) &(pcip->pmm[2].ma), 0x00000000);
-	out_le32((void *) &(pcip->ptm2ms), 0x00000000);
-
-	/* Zero config bars */
-	for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) {
-		early_write_config_dword(hose, hose->first_busno,
-					 PCI_FUNC(hose->first_busno), bar,
-					 0x00000000);
-		early_read_config_dword(hose, hose->first_busno,
-					PCI_FUNC(hose->first_busno), bar,
-					&bar_response);
-		DBG("BUS %d, device %d, Function %d bar 0x%8.8x is 0x%8.8x\n",
-		    hose->first_busno, PCI_SLOT(hose->first_busno),
-		    PCI_FUNC(hose->first_busno), bar, bar_response);
-	}
-	/* end work around */
-
-#ifdef DEBUG
-	printk("PCI bridge regs after fixup \n");
-	for (i = 0; i <= 3; i++) {
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].ma)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].la)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pcila)));
-		printk(" pmm%dma\t0x%x\n", i, in_le32(&(pcip->pmm[i].pciha)));
-	}
-	printk(" ptm1ms\t0x%x\n", in_le32(&(pcip->ptm1ms)));
-	printk(" ptm1la\t0x%x\n", in_le32(&(pcip->ptm1la)));
-	printk(" ptm2ms\t0x%x\n", in_le32(&(pcip->ptm2ms)));
-	printk(" ptm2la\t0x%x\n", in_le32(&(pcip->ptm2la)));
-
-#endif
-#endif
-}
-
-void __init
-walnut_map_io(void)
-{
-	ppc4xx_map_io();
-	io_block_mapping(WALNUT_RTC_VADDR,
-			 WALNUT_RTC_PADDR, WALNUT_RTC_SIZE, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = walnut_setup_arch;
-	ppc_md.setup_io_mappings = walnut_map_io;
-
-#ifdef CONFIG_GEN_RTC
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-#endif
-}
diff --git a/arch/ppc/platforms/4xx/walnut.h b/arch/ppc/platforms/4xx/walnut.h
deleted file mode 100644
index d9c4eb788940..000000000000
--- a/arch/ppc/platforms/4xx/walnut.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Walnut board definitions
- *
- * Copyright (c) 2005 DENX Software Engineering
- * Stefan Roese <sr@denx.de>
- *
- * Based on original work by
- * 	Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *	Frank Rowand <frank_rowand@mvista.com>
- *	Debbie Chu <debbie_chu@mvista.com>
- *	2000 (c) MontaVista, Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_WALNUT_H__
-#define __ASM_WALNUT_H__
-
-#include <platforms/4xx/ibm405gp.h>
-#include <asm/ppcboot.h>
-
-/* Memory map for the IBM "Walnut" 405GP evaluation board.
- * Generic 4xx plus RTC.
- */
-
-#define WALNUT_RTC_PADDR	((uint)0xf0000000)
-#define WALNUT_RTC_VADDR	WALNUT_RTC_PADDR
-#define WALNUT_RTC_SIZE		((uint)8*1024)
-
-#define BASE_BAUD		691200
-
-#define WALNUT_PS2_BASE		0xF0100000
-
-/* Flash */
-#define PPC40x_FPGA_BASE	0xF0300000
-#define PPC40x_FPGA_REG_OFFS	5	/* offset to flash map reg */
-#define PPC40x_FLASH_ONBD_N(x)	(x & 0x02)
-#define PPC40x_FLASH_SRAM_SEL(x) (x & 0x01)
-#define PPC40x_FLASH_LOW	0xFFF00000
-#define PPC40x_FLASH_HIGH	0xFFF80000
-#define PPC40x_FLASH_SIZE	0x80000
-#define WALNUT_FPGA_BASE	PPC40x_FPGA_BASE
-
-#define PPC4xx_MACHINE_NAME	"IBM Walnut"
-
-#endif /* __ASM_WALNUT_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c
deleted file mode 100644
index 6e522fefc26f..000000000000
--- a/arch/ppc/platforms/4xx/xilinx_ml300.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * Xilinx ML300 evaluation board initialization
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * 2002-2004 (c) MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/serialP.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-
-#include <syslib/gen550.h>
-#include <syslib/virtex_devices.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-
-/*
- * As an overview of how the following functions (platform_init,
- * ml300_map_io, ml300_setup_arch and ml300_init_IRQ) fit into the
- * kernel startup procedure, here's a call tree:
- *
- * start_here					arch/ppc/kernel/head_4xx.S
- *  early_init					arch/ppc/kernel/setup.c
- *  machine_init				arch/ppc/kernel/setup.c
- *    platform_init				this file
- *      ppc4xx_init				arch/ppc/syslib/ppc4xx_setup.c
- *        parse_bootinfo
- *          find_bootinfo
- *        "setup some default ppc_md pointers"
- *  MMU_init					arch/ppc/mm/init.c
- *    *ppc_md.setup_io_mappings == ml300_map_io	this file
- *      ppc4xx_map_io				arch/ppc/syslib/ppc4xx_setup.c
- *  start_kernel				init/main.c
- *    setup_arch				arch/ppc/kernel/setup.c
- * #if defined(CONFIG_KGDB)
- *      *ppc_md.kgdb_map_scc() == gen550_kgdb_map_scc
- * #endif
- *      *ppc_md.setup_arch == ml300_setup_arch	this file
- *        ppc4xx_setup_arch			arch/ppc/syslib/ppc4xx_setup.c
- *          ppc4xx_find_bridges			arch/ppc/syslib/ppc405_pci.c
- *    init_IRQ					arch/ppc/kernel/irq.c
- *      *ppc_md.init_IRQ == ml300_init_IRQ	this file
- *        ppc4xx_init_IRQ			arch/ppc/syslib/ppc4xx_setup.c
- *          ppc4xx_pic_init			arch/ppc/syslib/xilinx_pic.c
- */
-
-const char* virtex_machine_name = "ML300 Reference Design";
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-static volatile unsigned *powerdown_base =
-    (volatile unsigned *) XPAR_POWER_0_POWERDOWN_BASEADDR;
-
-static void
-xilinx_power_off(void)
-{
-	local_irq_disable();
-	out_be32(powerdown_base, XPAR_POWER_0_POWERDOWN_VALUE);
-	while (1) ;
-}
-#endif
-
-void __init
-ml300_map_io(void)
-{
-	ppc4xx_map_io();
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-	powerdown_base = ioremap((unsigned long) powerdown_base,
-				 XPAR_POWER_0_POWERDOWN_HIGHADDR -
-				 XPAR_POWER_0_POWERDOWN_BASEADDR + 1);
-#endif
-}
-
-void __init
-ml300_setup_arch(void)
-{
-	virtex_early_serial_map();
-	ppc4xx_setup_arch();	/* calls ppc4xx_find_bridges() */
-
-	/* Identify the system */
-	printk(KERN_INFO "Xilinx ML300 Reference System (Virtex-II Pro)\n");
-}
-
-/* Called after board_setup_irq from ppc4xx_init_IRQ(). */
-void __init
-ml300_init_irq(void)
-{
-	ppc4xx_init_IRQ();
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = ml300_setup_arch;
-	ppc_md.setup_io_mappings = ml300_map_io;
-	ppc_md.init_IRQ = ml300_init_irq;
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-	ppc_md.power_off = xilinx_power_off;
-#endif
-
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = virtex_early_serial_map;
-#endif
-}
-
diff --git a/arch/ppc/platforms/4xx/xilinx_ml403.c b/arch/ppc/platforms/4xx/xilinx_ml403.c
deleted file mode 100644
index bc3ace3762e7..000000000000
--- a/arch/ppc/platforms/4xx/xilinx_ml403.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Xilinx ML403 evaluation board initialization
- *
- * Author: Grant Likely <grant.likely@secretlab.ca>
- *
- * 2005-2007 (c) Secret Lab Technologies Ltd.
- * 2002-2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/serialP.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-
-#include <syslib/gen550.h>
-#include <syslib/virtex_devices.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-
-/*
- * As an overview of how the following functions (platform_init,
- * ml403_map_io, ml403_setup_arch and ml403_init_IRQ) fit into the
- * kernel startup procedure, here's a call tree:
- *
- * start_here					arch/ppc/kernel/head_4xx.S
- *  early_init					arch/ppc/kernel/setup.c
- *  machine_init				arch/ppc/kernel/setup.c
- *    platform_init				this file
- *      ppc4xx_init				arch/ppc/syslib/ppc4xx_setup.c
- *        parse_bootinfo
- *          find_bootinfo
- *        "setup some default ppc_md pointers"
- *  MMU_init					arch/ppc/mm/init.c
- *    *ppc_md.setup_io_mappings == ml403_map_io	this file
- *      ppc4xx_map_io				arch/ppc/syslib/ppc4xx_setup.c
- *  start_kernel				init/main.c
- *    setup_arch				arch/ppc/kernel/setup.c
- * #if defined(CONFIG_KGDB)
- *      *ppc_md.kgdb_map_scc() == gen550_kgdb_map_scc
- * #endif
- *      *ppc_md.setup_arch == ml403_setup_arch	this file
- *        ppc4xx_setup_arch			arch/ppc/syslib/ppc4xx_setup.c
- *          ppc4xx_find_bridges			arch/ppc/syslib/ppc405_pci.c
- *    init_IRQ					arch/ppc/kernel/irq.c
- *      *ppc_md.init_IRQ == ml403_init_IRQ	this file
- *        ppc4xx_init_IRQ			arch/ppc/syslib/ppc4xx_setup.c
- *          ppc4xx_pic_init			arch/ppc/syslib/xilinx_pic.c
- */
-
-const char* virtex_machine_name = "ML403 Reference Design";
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-static volatile unsigned *powerdown_base =
-    (volatile unsigned *) XPAR_POWER_0_POWERDOWN_BASEADDR;
-
-static void
-xilinx_power_off(void)
-{
-	local_irq_disable();
-	out_be32(powerdown_base, XPAR_POWER_0_POWERDOWN_VALUE);
-	while (1) ;
-}
-#endif
-
-void __init
-ml403_map_io(void)
-{
-	ppc4xx_map_io();
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-	powerdown_base = ioremap((unsigned long) powerdown_base,
-				 XPAR_POWER_0_POWERDOWN_HIGHADDR -
-				 XPAR_POWER_0_POWERDOWN_BASEADDR + 1);
-#endif
-}
-
-void __init
-ml403_setup_arch(void)
-{
-	virtex_early_serial_map();
-	ppc4xx_setup_arch();	/* calls ppc4xx_find_bridges() */
-
-	/* Identify the system */
-	printk(KERN_INFO "Xilinx ML403 Reference System (Virtex-4 FX)\n");
-}
-
-/* Called after board_setup_irq from ppc4xx_init_IRQ(). */
-void __init
-ml403_init_irq(void)
-{
-	ppc4xx_init_IRQ();
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	ppc4xx_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = ml403_setup_arch;
-	ppc_md.setup_io_mappings = ml403_map_io;
-	ppc_md.init_IRQ = ml403_init_irq;
-
-#if defined(XPAR_POWER_0_POWERDOWN_BASEADDR)
-	ppc_md.power_off = xilinx_power_off;
-#endif
-
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = virtex_early_serial_map;
-#endif
-}
-
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h
deleted file mode 100644
index 650888b00fb0..000000000000
--- a/arch/ppc/platforms/4xx/xparameters/xparameters.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/xparameters/xparameters.h
- *
- * This file includes the correct xparameters.h for the CONFIG'ed board plus
- * fixups to translate board specific XPAR values to a common set of names
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * 2004 (c) MontaVista Software, Inc.  This file is licensed under the terms
- * of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-
-#if defined(CONFIG_XILINX_ML300)
-  #include "xparameters_ml300.h"
-  #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_PLAYBACK_VEC_ID \
-	XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR
-  #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_RECORD_VEC_ID \
-	XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR
-#elif defined(CONFIG_XILINX_ML403)
-  #include "xparameters_ml403.h"
-  #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_PLAYBACK_VEC_ID \
-	XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR
-  #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_RECORD_VEC_ID \
-	XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR
-#else
-  /* Add other board xparameter includes here before the #else */
-  #error No xparameters_*.h file included
-#endif
-
-#ifndef SERIAL_PORT_DFNS
-  /* zImage serial port definitions */
-  #define RS_TABLE_SIZE 1
-  #define SERIAL_PORT_DFNS {						\
-	.baud_base	 = XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16,		\
-	.irq		 = XPAR_INTC_0_UARTNS550_0_VEC_ID,		\
-	.flags		 = ASYNC_BOOT_AUTOCONF,				\
-	.iomem_base	 = (u8 *)XPAR_UARTNS550_0_BASEADDR + 3,		\
-	.iomem_reg_shift = 2,						\
-	.io_type	 = SERIAL_IO_MEM,				\
-  },
-#endif
-
-/*
- * A few reasonable defaults for the #defines which could be missing depending
- * on the IP version or variant (e.g. OPB vs PLB)
- */
-
-#ifndef XPAR_EMAC_0_CAM_EXIST
-#define XPAR_EMAC_0_CAM_EXIST 0
-#endif
-#ifndef XPAR_EMAC_0_JUMBO_EXIST
-#define XPAR_EMAC_0_JUMBO_EXIST 0
-#endif
-#ifndef XPAR_EMAC_0_TX_DRE_TYPE
-#define XPAR_EMAC_0_TX_DRE_TYPE 0
-#endif
-#ifndef XPAR_EMAC_0_RX_DRE_TYPE
-#define XPAR_EMAC_0_RX_DRE_TYPE 0
-#endif
-#ifndef XPAR_EMAC_0_TX_INCLUDE_CSUM
-#define XPAR_EMAC_0_TX_INCLUDE_CSUM 0
-#endif
-#ifndef XPAR_EMAC_0_RX_INCLUDE_CSUM
-#define XPAR_EMAC_0_RX_INCLUDE_CSUM 0
-#endif
-
-#ifndef XPAR_EMAC_1_CAM_EXIST
-#define XPAR_EMAC_1_CAM_EXIST 0
-#endif
-#ifndef XPAR_EMAC_1_JUMBO_EXIST
-#define XPAR_EMAC_1_JUMBO_EXIST 0
-#endif
-#ifndef XPAR_EMAC_1_TX_DRE_TYPE
-#define XPAR_EMAC_1_TX_DRE_TYPE 0
-#endif
-#ifndef XPAR_EMAC_1_RX_DRE_TYPE
-#define XPAR_EMAC_1_RX_DRE_TYPE 0
-#endif
-#ifndef XPAR_EMAC_1_TX_INCLUDE_CSUM
-#define XPAR_EMAC_1_TX_INCLUDE_CSUM 0
-#endif
-#ifndef XPAR_EMAC_1_RX_INCLUDE_CSUM
-#define XPAR_EMAC_1_RX_INCLUDE_CSUM 0
-#endif
-
-#ifndef XPAR_GPIO_0_IS_DUAL
-#define XPAR_GPIO_0_IS_DUAL 0
-#endif
-#ifndef XPAR_GPIO_1_IS_DUAL
-#define XPAR_GPIO_1_IS_DUAL 0
-#endif
-#ifndef XPAR_GPIO_2_IS_DUAL
-#define XPAR_GPIO_2_IS_DUAL 0
-#endif
-#ifndef XPAR_GPIO_3_IS_DUAL
-#define XPAR_GPIO_3_IS_DUAL 0
-#endif
-#ifndef XPAR_GPIO_4_IS_DUAL
-#define XPAR_GPIO_4_IS_DUAL 0
-#endif
-
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters_ml300.h b/arch/ppc/platforms/4xx/xparameters/xparameters_ml300.h
deleted file mode 100644
index 97e3f4d4bd54..000000000000
--- a/arch/ppc/platforms/4xx/xparameters/xparameters_ml300.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*******************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-* Description: Driver parameters
-*
-*******************************************************************/
-
-#define XPAR_XPCI_NUM_INSTANCES 1
-#define XPAR_XPCI_CLOCK_HZ 33333333
-#define XPAR_OPB_PCI_REF_0_DEVICE_ID 0
-#define XPAR_OPB_PCI_REF_0_BASEADDR 0x20000000
-#define XPAR_OPB_PCI_REF_0_HIGHADDR 0x3FFFFFFF
-#define XPAR_OPB_PCI_REF_0_CONFIG_ADDR 0x3C000000
-#define XPAR_OPB_PCI_REF_0_CONFIG_DATA 0x3C000004
-#define XPAR_OPB_PCI_REF_0_LCONFIG_ADDR 0x3E000000
-#define XPAR_OPB_PCI_REF_0_MEM_BASEADDR 0x20000000
-#define XPAR_OPB_PCI_REF_0_MEM_HIGHADDR 0x37FFFFFF
-#define XPAR_OPB_PCI_REF_0_IO_BASEADDR 0x38000000
-#define XPAR_OPB_PCI_REF_0_IO_HIGHADDR 0x3BFFFFFF
-
-/******************************************************************/
-
-#define XPAR_XEMAC_NUM_INSTANCES 1
-#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000
-#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF
-#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
-#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
-#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
-#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
-
-/******************************************************************/
-
-#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_0 0
-#define XPAR_MY_OPB_GPIO_0_BASEADDR_0 0x90000000
-#define XPAR_MY_OPB_GPIO_0_HIGHADDR_0 (0x90000000+0x7)
-#define XPAR_MY_OPB_GPIO_0_DEVICE_ID_1 1
-#define XPAR_MY_OPB_GPIO_0_BASEADDR_1 (0x90000000+0x8)
-#define XPAR_MY_OPB_GPIO_0_HIGHADDR_1 (0x90000000+0x1F)
-#define XPAR_XGPIO_NUM_INSTANCES 2
-
-/******************************************************************/
-
-#define XPAR_XIIC_NUM_INSTANCES 1
-#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000
-#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF
-#define XPAR_OPB_IIC_0_DEVICE_ID 0
-#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0
-
-/******************************************************************/
-
-#define XPAR_XUARTNS550_NUM_INSTANCES 2
-#define XPAR_XUARTNS550_CLOCK_HZ 100000000
-#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000
-#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF
-#define XPAR_OPB_UART16550_0_DEVICE_ID 0
-#define XPAR_OPB_UART16550_1_BASEADDR 0xA0010000
-#define XPAR_OPB_UART16550_1_HIGHADDR 0xA0011FFF
-#define XPAR_OPB_UART16550_1_DEVICE_ID 1
-
-/******************************************************************/
-
-#define XPAR_XSPI_NUM_INSTANCES 1
-#define XPAR_OPB_SPI_0_BASEADDR 0xA4000000
-#define XPAR_OPB_SPI_0_HIGHADDR 0xA400007F
-#define XPAR_OPB_SPI_0_DEVICE_ID 0
-#define XPAR_OPB_SPI_0_FIFO_EXIST 1
-#define XPAR_OPB_SPI_0_SPI_SLAVE_ONLY 0
-#define XPAR_OPB_SPI_0_NUM_SS_BITS 1
-
-/******************************************************************/
-
-#define XPAR_XPS2_NUM_INSTANCES 2
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 0
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 0xA9000000
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 (0xA9000000+0x3F)
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 1
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 (0xA9000000+0x1000)
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 (0xA9000000+0x103F)
-
-/******************************************************************/
-
-#define XPAR_XTOUCHSCREEN_NUM_INSTANCES 1
-#define XPAR_OPB_TSD_REF_0_BASEADDR 0xAA000000
-#define XPAR_OPB_TSD_REF_0_HIGHADDR 0xAA000007
-#define XPAR_OPB_TSD_REF_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR 0xA6000000
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_HIGHADDR 0xA60000FF
-#define XPAR_OPB_PAR_PORT_REF_0_BASEADDR 0x90010000
-#define XPAR_OPB_PAR_PORT_REF_0_HIGHADDR 0x900100FF
-#define XPAR_PLB_DDR_0_BASEADDR 0x00000000
-#define XPAR_PLB_DDR_0_HIGHADDR 0x0FFFFFFF
-
-/******************************************************************/
-
-#define XPAR_XINTC_HAS_IPR 1
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS 18
-#define XPAR_XINTC_USE_DCR 0
-#define XPAR_XINTC_NUM_INSTANCES 1
-#define XPAR_DCR_INTC_0_BASEADDR 0xD0000FC0
-#define XPAR_DCR_INTC_0_HIGHADDR 0xD0000FDF
-#define XPAR_DCR_INTC_0_DEVICE_ID 0
-#define XPAR_DCR_INTC_0_KIND_OF_INTR 0x00038000
-
-/******************************************************************/
-
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_PHY_MII_INT_INTR 0
-#define XPAR_DCR_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR 1
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_TEMP_CRIT_INTR 2
-#define XPAR_DCR_INTC_0_MISC_LOGIC_0_IIC_IRQ_INTR 3
-#define XPAR_DCR_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 4
-#define XPAR_DCR_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 5
-#define XPAR_DCR_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 6
-#define XPAR_DCR_INTC_0_OPB_UART16550_1_IP2INTC_IRPT_INTR 7
-#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR 8
-#define XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR 9
-#define XPAR_DCR_INTC_0_OPB_SPI_0_IP2INTC_IRPT_INTR 10
-#define XPAR_DCR_INTC_0_OPB_TSD_REF_0_INTR_INTR 11
-#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR 12
-#define XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR 13
-#define XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR 14
-#define XPAR_DCR_INTC_0_PLB2OPB_BRIDGE_0_BUS_ERROR_DET_INTR 15
-#define XPAR_DCR_INTC_0_PLB_V34_0_BUS_ERROR_DET_INTR 16
-#define XPAR_DCR_INTC_0_OPB2PLB_BRIDGE_0_BUS_ERROR_DET_INTR 17
-
-/******************************************************************/
-
-#define XPAR_XTFT_NUM_INSTANCES 1
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR 0xD0000200
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_HIGHADDR 0xD0000207
-#define XPAR_PLB_TFT_CNTLR_REF_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_XSYSACE_MEM_WIDTH 8
-#define XPAR_XSYSACE_NUM_INSTANCES 1
-#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000
-#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF
-#define XPAR_OPB_SYSACE_0_DEVICE_ID 0
-#define XPAR_OPB_SYSACE_0_MEM_WIDTH 8
-
-/******************************************************************/
-
-#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000
-
-/******************************************************************/
-
-/******************************************************************/
-
-/* Linux Redefines */
-
-/******************************************************************/
-
-#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000)
-#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR
-#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
-#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID
-#define XPAR_UARTNS550_1_BASEADDR (XPAR_OPB_UART16550_1_BASEADDR+0x1000)
-#define XPAR_UARTNS550_1_HIGHADDR XPAR_OPB_UART16550_1_HIGHADDR
-#define XPAR_UARTNS550_1_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
-#define XPAR_UARTNS550_1_DEVICE_ID XPAR_OPB_UART16550_1_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_GPIO_0_BASEADDR XPAR_MY_OPB_GPIO_0_BASEADDR_0
-#define XPAR_GPIO_0_HIGHADDR XPAR_MY_OPB_GPIO_0_HIGHADDR_0
-#define XPAR_GPIO_0_DEVICE_ID XPAR_MY_OPB_GPIO_0_DEVICE_ID_0
-#define XPAR_GPIO_1_BASEADDR XPAR_MY_OPB_GPIO_0_BASEADDR_1
-#define XPAR_GPIO_1_HIGHADDR XPAR_MY_OPB_GPIO_0_HIGHADDR_1
-#define XPAR_GPIO_1_DEVICE_ID XPAR_MY_OPB_GPIO_0_DEVICE_ID_1
-
-/******************************************************************/
-
-#define XPAR_IIC_0_BASEADDR XPAR_OPB_IIC_0_BASEADDR
-#define XPAR_IIC_0_HIGHADDR XPAR_OPB_IIC_0_HIGHADDR
-#define XPAR_IIC_0_TEN_BIT_ADR XPAR_OPB_IIC_0_TEN_BIT_ADR
-#define XPAR_IIC_0_DEVICE_ID XPAR_OPB_IIC_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_SYSACE_0_BASEADDR XPAR_OPB_SYSACE_0_BASEADDR
-#define XPAR_SYSACE_0_HIGHADDR XPAR_OPB_SYSACE_0_HIGHADDR
-#define XPAR_SYSACE_0_DEVICE_ID XPAR_OPB_SYSACE_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_INTC_0_BASEADDR XPAR_DCR_INTC_0_BASEADDR
-#define XPAR_INTC_0_HIGHADDR XPAR_DCR_INTC_0_HIGHADDR
-#define XPAR_INTC_0_KIND_OF_INTR XPAR_DCR_INTC_0_KIND_OF_INTR
-#define XPAR_INTC_0_DEVICE_ID XPAR_DCR_INTC_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_INTC_0_EMAC_0_VEC_ID XPAR_DCR_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_IIC_0_VEC_ID XPAR_DCR_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_SYSACE_0_VEC_ID XPAR_DCR_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR
-#define XPAR_INTC_0_UARTNS550_0_VEC_ID XPAR_DCR_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_UARTNS550_1_VEC_ID XPAR_DCR_INTC_0_OPB_UART16550_1_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_PS2_0_VEC_ID XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR
-#define XPAR_INTC_0_PS2_1_VEC_ID XPAR_DCR_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR
-#define XPAR_INTC_0_SPI_0_VEC_ID XPAR_DCR_INTC_0_OPB_SPI_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_TOUCHSCREEN_0_VEC_ID XPAR_DCR_INTC_0_OPB_TSD_REF_0_INTR_INTR
-#define XPAR_INTC_0_PCI_0_VEC_ID_A XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR
-#define XPAR_INTC_0_PCI_0_VEC_ID_B XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR
-#define XPAR_INTC_0_PCI_0_VEC_ID_C XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR
-#define XPAR_INTC_0_PCI_0_VEC_ID_D XPAR_DCR_INTC_0_OPB_PCI_REF_0_INTR_OUT_INTR
-
-/******************************************************************/
-
-#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR
-#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR
-#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT
-#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST
-#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST
-#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_SPI_0_BASEADDR XPAR_OPB_SPI_0_BASEADDR
-#define XPAR_SPI_0_HIGHADDR XPAR_OPB_SPI_0_HIGHADDR
-#define XPAR_SPI_0_DEVICE_ID XPAR_OPB_SPI_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_TOUCHSCREEN_0_BASEADDR XPAR_OPB_TSD_REF_0_BASEADDR
-#define XPAR_TOUCHSCREEN_0_HIGHADDR XPAR_OPB_TSD_REF_0_HIGHADDR
-#define XPAR_TOUCHSCREEN_0_DEVICE_ID XPAR_OPB_TSD_REF_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_TFT_0_BASEADDR XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR
-
-/******************************************************************/
-
-#define XPAR_PCI_0_BASEADDR XPAR_OPB_PCI_REF_0_BASEADDR
-#define XPAR_PCI_0_HIGHADDR XPAR_OPB_PCI_REF_0_HIGHADDR
-#define XPAR_PCI_0_CONFIG_ADDR XPAR_OPB_PCI_REF_0_CONFIG_ADDR
-#define XPAR_PCI_0_CONFIG_DATA XPAR_OPB_PCI_REF_0_CONFIG_DATA
-#define XPAR_PCI_0_LCONFIG_ADDR XPAR_OPB_PCI_REF_0_LCONFIG_ADDR
-#define XPAR_PCI_0_MEM_BASEADDR XPAR_OPB_PCI_REF_0_MEM_BASEADDR
-#define XPAR_PCI_0_MEM_HIGHADDR XPAR_OPB_PCI_REF_0_MEM_HIGHADDR
-#define XPAR_PCI_0_IO_BASEADDR XPAR_OPB_PCI_REF_0_IO_BASEADDR
-#define XPAR_PCI_0_IO_HIGHADDR XPAR_OPB_PCI_REF_0_IO_HIGHADDR
-#define XPAR_PCI_0_CLOCK_FREQ_HZ XPAR_XPCI_CLOCK_HZ
-#define XPAR_PCI_0_DEVICE_ID XPAR_OPB_PCI_REF_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_PS2_0_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0
-#define XPAR_PS2_0_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0
-#define XPAR_PS2_0_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0
-#define XPAR_PS2_1_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1
-#define XPAR_PS2_1_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1
-#define XPAR_PS2_1_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1
-
-/******************************************************************/
-
-#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
-#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ
-#define XPAR_DDR_0_SIZE 0x08000000
-
-/******************************************************************/
-
-#define XPAR_PERSISTENT_0_IIC_0_BASEADDR 0x00000400
-#define XPAR_PERSISTENT_0_IIC_0_HIGHADDR 0x000007FF
-#define XPAR_PERSISTENT_0_IIC_0_EEPROMADDR 0xA0
-
-/******************************************************************/
-
-#define XPAR_POWER_0_POWERDOWN_BASEADDR 0x90000004
-#define XPAR_POWER_0_POWERDOWN_HIGHADDR 0x90000007
-#define XPAR_POWER_0_POWERDOWN_VALUE 0xFF
-
-/******************************************************************/
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h b/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h
deleted file mode 100644
index 5cacdcb3964d..000000000000
--- a/arch/ppc/platforms/4xx/xparameters/xparameters_ml403.h
+++ /dev/null
@@ -1,243 +0,0 @@
-
-/*******************************************************************
-*
-* CAUTION: This file is automatically generated by libgen.
-* Version: Xilinx EDK 7.1.2 EDK_H.12.5.1
-* DO NOT EDIT.
-*
-* Copyright (c) 2005 Xilinx, Inc.  All rights reserved. 
-* 
-* Description: Driver parameters
-*
-*******************************************************************/
-
-#define XPAR_PLB_BRAM_IF_CNTLR_0_BASEADDR 0xFFFF0000
-#define XPAR_PLB_BRAM_IF_CNTLR_0_HIGHADDR 0xFFFFFFFF
-
-/******************************************************************/
-
-#define XPAR_OPB_EMC_0_MEM0_BASEADDR 0x20000000
-#define XPAR_OPB_EMC_0_MEM0_HIGHADDR 0x200FFFFF
-#define XPAR_OPB_EMC_0_MEM1_BASEADDR 0x28000000
-#define XPAR_OPB_EMC_0_MEM1_HIGHADDR 0x287FFFFF
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR 0xA6000000
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_HIGHADDR 0xA60000FF
-#define XPAR_OPB_EMC_USB_0_MEM0_BASEADDR 0xA5000000
-#define XPAR_OPB_EMC_USB_0_MEM0_HIGHADDR 0xA50000FF
-#define XPAR_PLB_DDR_0_MEM0_BASEADDR 0x00000000
-#define XPAR_PLB_DDR_0_MEM0_HIGHADDR 0x0FFFFFFF
-
-/******************************************************************/
-
-#define XPAR_XEMAC_NUM_INSTANCES 1
-#define XPAR_OPB_ETHERNET_0_BASEADDR 0x60000000
-#define XPAR_OPB_ETHERNET_0_HIGHADDR 0x60003FFF
-#define XPAR_OPB_ETHERNET_0_DEVICE_ID 0
-#define XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST 1
-#define XPAR_OPB_ETHERNET_0_DMA_PRESENT 1
-#define XPAR_OPB_ETHERNET_0_MII_EXIST 1
-
-/******************************************************************/
-
-#define XPAR_XUARTNS550_NUM_INSTANCES 1
-#define XPAR_XUARTNS550_CLOCK_HZ 100000000
-#define XPAR_OPB_UART16550_0_BASEADDR 0xA0000000
-#define XPAR_OPB_UART16550_0_HIGHADDR 0xA0001FFF
-#define XPAR_OPB_UART16550_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_XGPIO_NUM_INSTANCES 3
-#define XPAR_OPB_GPIO_0_BASEADDR 0x90000000
-#define XPAR_OPB_GPIO_0_HIGHADDR 0x900001FF
-#define XPAR_OPB_GPIO_0_DEVICE_ID 0
-#define XPAR_OPB_GPIO_0_INTERRUPT_PRESENT 0
-#define XPAR_OPB_GPIO_0_IS_DUAL 1
-#define XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR 0x90001000
-#define XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR 0x900011FF
-#define XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID 1
-#define XPAR_OPB_GPIO_EXP_HDR_0_INTERRUPT_PRESENT 0
-#define XPAR_OPB_GPIO_EXP_HDR_0_IS_DUAL 1
-#define XPAR_OPB_GPIO_CHAR_LCD_0_BASEADDR 0x90002000
-#define XPAR_OPB_GPIO_CHAR_LCD_0_HIGHADDR 0x900021FF
-#define XPAR_OPB_GPIO_CHAR_LCD_0_DEVICE_ID 2
-#define XPAR_OPB_GPIO_CHAR_LCD_0_INTERRUPT_PRESENT 0
-#define XPAR_OPB_GPIO_CHAR_LCD_0_IS_DUAL 0
-
-/******************************************************************/
-
-#define XPAR_XPS2_NUM_INSTANCES 2
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0 0
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0 0xA9000000
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0 (0xA9000000+0x3F)
-#define XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1 1
-#define XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1 (0xA9000000+0x1000)
-#define XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1 (0xA9000000+0x103F)
-
-/******************************************************************/
-
-#define XPAR_XIIC_NUM_INSTANCES 1
-#define XPAR_OPB_IIC_0_BASEADDR 0xA8000000
-#define XPAR_OPB_IIC_0_HIGHADDR 0xA80001FF
-#define XPAR_OPB_IIC_0_DEVICE_ID 0
-#define XPAR_OPB_IIC_0_TEN_BIT_ADR 0
-#define XPAR_OPB_IIC_0_GPO_WIDTH 1
-
-/******************************************************************/
-
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS 10
-#define XPAR_XINTC_HAS_IPR 1
-#define XPAR_XINTC_USE_DCR 0
-#define XPAR_XINTC_NUM_INSTANCES 1
-#define XPAR_OPB_INTC_0_BASEADDR 0xD1000FC0
-#define XPAR_OPB_INTC_0_HIGHADDR 0xD1000FDF
-#define XPAR_OPB_INTC_0_DEVICE_ID 0
-#define XPAR_OPB_INTC_0_KIND_OF_INTR 0x00000000
-
-/******************************************************************/
-
-#define XPAR_INTC_SINGLE_BASEADDR 0xD1000FC0
-#define XPAR_INTC_SINGLE_HIGHADDR 0xD1000FDF
-#define XPAR_INTC_SINGLE_DEVICE_ID XPAR_OPB_INTC_0_DEVICE_ID
-#define XPAR_OPB_ETHERNET_0_IP2INTC_IRPT_MASK 0X000001
-#define XPAR_OPB_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR 0
-#define XPAR_SYSTEM_USB_HPI_INT_MASK 0X000002
-#define XPAR_OPB_INTC_0_SYSTEM_USB_HPI_INT_INTR 1
-#define XPAR_MISC_LOGIC_0_PHY_MII_INT_MASK 0X000004
-#define XPAR_OPB_INTC_0_MISC_LOGIC_0_PHY_MII_INT_INTR 2
-#define XPAR_OPB_SYSACE_0_SYSACE_IRQ_MASK 0X000008
-#define XPAR_OPB_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR 3
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_MASK 0X000010
-#define XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR 4
-#define XPAR_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_MASK 0X000020
-#define XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR 5
-#define XPAR_OPB_IIC_0_IP2INTC_IRPT_MASK 0X000040
-#define XPAR_OPB_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR 6
-#define XPAR_OPB_PS2_DUAL_REF_0_SYS_INTR2_MASK 0X000080
-#define XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR 7
-#define XPAR_OPB_PS2_DUAL_REF_0_SYS_INTR1_MASK 0X000100
-#define XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR 8
-#define XPAR_OPB_UART16550_0_IP2INTC_IRPT_MASK 0X000200
-#define XPAR_OPB_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR 9
-
-/******************************************************************/
-
-#define XPAR_XTFT_NUM_INSTANCES 1
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR 0xD0000200
-#define XPAR_PLB_TFT_CNTLR_REF_0_DCR_HIGHADDR 0xD0000207
-#define XPAR_PLB_TFT_CNTLR_REF_0_DEVICE_ID 0
-
-/******************************************************************/
-
-#define XPAR_XSYSACE_MEM_WIDTH 16
-#define XPAR_XSYSACE_NUM_INSTANCES 1
-#define XPAR_OPB_SYSACE_0_BASEADDR 0xCF000000
-#define XPAR_OPB_SYSACE_0_HIGHADDR 0xCF0001FF
-#define XPAR_OPB_SYSACE_0_DEVICE_ID 0
-#define XPAR_OPB_SYSACE_0_MEM_WIDTH 16
-
-/******************************************************************/
-
-#define XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ 300000000
-
-/******************************************************************/
-
-
-/******************************************************************/
-
-/* Linux Redefines */
-
-/******************************************************************/
-
-#define XPAR_UARTNS550_0_BASEADDR (XPAR_OPB_UART16550_0_BASEADDR+0x1000)
-#define XPAR_UARTNS550_0_HIGHADDR XPAR_OPB_UART16550_0_HIGHADDR
-#define XPAR_UARTNS550_0_CLOCK_FREQ_HZ XPAR_XUARTNS550_CLOCK_HZ
-#define XPAR_UARTNS550_0_DEVICE_ID XPAR_OPB_UART16550_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_INTC_0_BASEADDR XPAR_OPB_INTC_0_BASEADDR
-#define XPAR_INTC_0_HIGHADDR XPAR_OPB_INTC_0_HIGHADDR
-#define XPAR_INTC_0_KIND_OF_INTR XPAR_OPB_INTC_0_KIND_OF_INTR
-#define XPAR_INTC_0_DEVICE_ID XPAR_OPB_INTC_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_INTC_0_EMAC_0_VEC_ID XPAR_OPB_INTC_0_OPB_ETHERNET_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_SYSACE_0_VEC_ID XPAR_OPB_INTC_0_OPB_SYSACE_0_SYSACE_IRQ_INTR
-#define XPAR_INTC_0_IIC_0_VEC_ID XPAR_OPB_INTC_0_OPB_IIC_0_IP2INTC_IRPT_INTR
-#define XPAR_INTC_0_PS2_1_VEC_ID XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR2_INTR
-#define XPAR_INTC_0_PS2_0_VEC_ID XPAR_OPB_INTC_0_OPB_PS2_DUAL_REF_0_SYS_INTR1_INTR
-#define XPAR_INTC_0_UARTNS550_0_VEC_ID XPAR_OPB_INTC_0_OPB_UART16550_0_IP2INTC_IRPT_INTR
-
-/******************************************************************/
-
-#define XPAR_TFT_0_BASEADDR XPAR_PLB_TFT_CNTLR_REF_0_DCR_BASEADDR
-
-/******************************************************************/
-
-#define XPAR_EMAC_0_BASEADDR XPAR_OPB_ETHERNET_0_BASEADDR
-#define XPAR_EMAC_0_HIGHADDR XPAR_OPB_ETHERNET_0_HIGHADDR
-#define XPAR_EMAC_0_DMA_PRESENT XPAR_OPB_ETHERNET_0_DMA_PRESENT
-#define XPAR_EMAC_0_MII_EXIST XPAR_OPB_ETHERNET_0_MII_EXIST
-#define XPAR_EMAC_0_ERR_COUNT_EXIST XPAR_OPB_ETHERNET_0_ERR_COUNT_EXIST
-#define XPAR_EMAC_0_DEVICE_ID XPAR_OPB_ETHERNET_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_GPIO_0_BASEADDR XPAR_OPB_GPIO_0_BASEADDR_0
-#define XPAR_GPIO_0_HIGHADDR XPAR_OPB_GPIO_0_HIGHADDR_0
-#define XPAR_GPIO_0_DEVICE_ID XPAR_OPB_GPIO_0_DEVICE_ID_0
-#define XPAR_GPIO_1_BASEADDR XPAR_OPB_GPIO_0_BASEADDR_1
-#define XPAR_GPIO_1_HIGHADDR XPAR_OPB_GPIO_0_HIGHADDR_1
-#define XPAR_GPIO_1_DEVICE_ID XPAR_OPB_GPIO_0_DEVICE_ID_1
-#define XPAR_GPIO_2_BASEADDR XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR_0
-#define XPAR_GPIO_2_HIGHADDR XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR_0
-#define XPAR_GPIO_2_DEVICE_ID XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID_0
-#define XPAR_GPIO_3_BASEADDR XPAR_OPB_GPIO_EXP_HDR_0_BASEADDR_1
-#define XPAR_GPIO_3_HIGHADDR XPAR_OPB_GPIO_EXP_HDR_0_HIGHADDR_1
-#define XPAR_GPIO_3_DEVICE_ID XPAR_OPB_GPIO_EXP_HDR_0_DEVICE_ID_1
-#define XPAR_GPIO_4_BASEADDR XPAR_OPB_GPIO_CHAR_LCD_0_BASEADDR
-#define XPAR_GPIO_4_HIGHADDR XPAR_OPB_GPIO_CHAR_LCD_0_HIGHADDR
-#define XPAR_GPIO_4_DEVICE_ID XPAR_OPB_GPIO_CHAR_LCD_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_PS2_0_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_0
-#define XPAR_PS2_0_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_0
-#define XPAR_PS2_0_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_0
-#define XPAR_PS2_1_BASEADDR XPAR_OPB_PS2_DUAL_REF_0_BASEADDR_1
-#define XPAR_PS2_1_HIGHADDR XPAR_OPB_PS2_DUAL_REF_0_HIGHADDR_1
-#define XPAR_PS2_1_DEVICE_ID XPAR_OPB_PS2_DUAL_REF_0_DEVICE_ID_1
-
-/******************************************************************/
-
-#define XPAR_SYSACE_0_BASEADDR XPAR_OPB_SYSACE_0_BASEADDR
-#define XPAR_SYSACE_0_HIGHADDR XPAR_OPB_SYSACE_0_HIGHADDR
-#define XPAR_SYSACE_0_DEVICE_ID XPAR_OPB_SYSACE_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_IIC_0_BASEADDR XPAR_OPB_IIC_0_BASEADDR
-#define XPAR_IIC_0_HIGHADDR XPAR_OPB_IIC_0_HIGHADDR
-#define XPAR_IIC_0_TEN_BIT_ADR XPAR_OPB_IIC_0_TEN_BIT_ADR
-#define XPAR_IIC_0_DEVICE_ID XPAR_OPB_IIC_0_DEVICE_ID
-
-/******************************************************************/
-
-#define XPAR_PLB_CLOCK_FREQ_HZ 100000000
-#define XPAR_CORE_CLOCK_FREQ_HZ XPAR_CPU_PPC405_CORE_CLOCK_FREQ_HZ
-#define XPAR_DDR_0_SIZE 0x4000000
-
-/******************************************************************/
-
-#define XPAR_PERSISTENT_0_IIC_0_BASEADDR 0x00000400
-#define XPAR_PERSISTENT_0_IIC_0_HIGHADDR 0x000007FF
-#define XPAR_PERSISTENT_0_IIC_0_EEPROMADDR 0xA0
-
-/******************************************************************/
-
-#define XPAR_PCI_0_CLOCK_FREQ_HZ    0
-
-/******************************************************************/
-
diff --git a/arch/ppc/platforms/4xx/yucca.c b/arch/ppc/platforms/4xx/yucca.c
deleted file mode 100644
index f6cfd44281fc..000000000000
--- a/arch/ppc/platforms/4xx/yucca.c
+++ /dev/null
@@ -1,393 +0,0 @@
-/*
- * Yucca board specific routines
- *
- * Roland Dreier <rolandd@cisco.com> (based on luan.c by Matt Porter)
- *
- * Copyright 2004-2005 MontaVista Software Inc.
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/ocp.h>
-#include <asm/pci-bridge.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/ibm44x_common.h>
-#include <syslib/ibm440gx_common.h>
-#include <syslib/ibm440sp_common.h>
-#include <syslib/ppc440spe_pcie.h>
-
-extern bd_t __res;
-
-static struct ibm44x_clocks clocks __initdata;
-
-static void __init
-yucca_calibrate_decr(void)
-{
-	unsigned int freq;
-
-	if (mfspr(SPRN_CCR1) & CCR1_TCS)
-		freq = YUCCA_TMR_CLK;
-	else
-		freq = clocks.cpu;
-
-	ibm44x_calibrate_decr(freq);
-}
-
-static int
-yucca_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: AMCC\n");
-	seq_printf(m, "machine\t\t: PPC440SPe EVB (Yucca)\n");
-
-	return 0;
-}
-
-static enum {
-	HOSE_UNKNOWN,
-	HOSE_PCIX,
-	HOSE_PCIE0,
-	HOSE_PCIE1,
-	HOSE_PCIE2
-} hose_type[4];
-
-static inline int
-yucca_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-
-	if (hose_type[hose->index] == HOSE_PCIX) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 81, -1, -1, -1 },	/* IDSEL 1 - PCIX0 Slot 0 */
-		};
-		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else if (hose_type[hose->index] == HOSE_PCIE0) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 96, 97, 98, 99 },
-		};
-		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else if (hose_type[hose->index] == HOSE_PCIE1) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 100, 101, 102, 103 },
-		};
-		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else if (hose_type[hose->index] == HOSE_PCIE2) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 *	  A   B   C   D
-		 */
-		{
-			{ 104, 105, 106, 107 },
-		};
-		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-	return -1;
-}
-
-static void __init yucca_set_emacdata(void)
-{
-	struct ocp_def *def;
-	struct ocp_func_emac_data *emacdata;
-
-	/* Set phy_map, phy_mode, and mac_addr for the EMAC */
-	def = ocp_get_one_device(OCP_VENDOR_IBM, OCP_FUNC_EMAC, 0);
-	emacdata = def->additions;
-	emacdata->phy_map = 0x00000001;	/* Skip 0x00 */
-	emacdata->phy_mode = PHY_MODE_GMII;
-	memcpy(emacdata->mac_addr, __res.bi_enetaddr, 6);
-}
-
-static int __init yucca_pcie_card_present(int port)
-{
-   void __iomem *pcie_fpga_base;
-   u16 reg;
-
-   pcie_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE);
-   reg = in_be16(pcie_fpga_base + FPGA_REG1C);
-   iounmap(pcie_fpga_base);
-
-   switch(port) {
-   case 0: return !(reg & FPGA_REG1C_PE0_PRSNT);
-   case 1: return !(reg & FPGA_REG1C_PE1_PRSNT);
-   case 2: return !(reg & FPGA_REG1C_PE2_PRSNT);
-   default: return 0;
-   }
-}
-
-/*
- * For the given slot, set rootpoint mode, send power to the slot,
- * turn on the green LED and turn off the yellow LED, enable the clock
- * and turn off reset.
- */
-static void __init yucca_setup_pcie_fpga_rootpoint(int port)
-{
-	void __iomem *pcie_reg_fpga_base;
-	u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
-
-	pcie_reg_fpga_base = ioremap64(YUCCA_FPGA_REG_BASE, YUCCA_FPGA_REG_SIZE);
-
-	switch(port) {
-	case 0:
-		rootpoint   = FPGA_REG1C_PE0_ROOTPOINT;
-		endpoint    = 0;
-		power 	    = FPGA_REG1A_PE0_PWRON;
-		green_led   = FPGA_REG1A_PE0_GLED;
-		clock 	    = FPGA_REG1A_PE0_REFCLK_ENABLE;
-		yellow_led  = FPGA_REG1A_PE0_YLED;
-		reset_off   = FPGA_REG1C_PE0_PERST;
-		break;
-	case 1:
-		rootpoint   = 0;
-		endpoint    = FPGA_REG1C_PE1_ENDPOINT;
-		power 	    = FPGA_REG1A_PE1_PWRON;
-		green_led   = FPGA_REG1A_PE1_GLED;
-		clock 	    = FPGA_REG1A_PE1_REFCLK_ENABLE;
-		yellow_led  = FPGA_REG1A_PE1_YLED;
-		reset_off   = FPGA_REG1C_PE1_PERST;
-		break;
-	case 2:
-		rootpoint   = 0;
-		endpoint    = FPGA_REG1C_PE2_ENDPOINT;
-		power 	    = FPGA_REG1A_PE2_PWRON;
-		green_led   = FPGA_REG1A_PE2_GLED;
-		clock 	    = FPGA_REG1A_PE2_REFCLK_ENABLE;
-		yellow_led  = FPGA_REG1A_PE2_YLED;
-		reset_off   = FPGA_REG1C_PE2_PERST;
-		break;
-
-	default:
-		iounmap(pcie_reg_fpga_base);
-		return;
-	}
-
-	out_be16(pcie_reg_fpga_base + FPGA_REG1A,
-		 ~(power | clock | green_led) &
-		 (yellow_led | in_be16(pcie_reg_fpga_base + FPGA_REG1A)));
-	out_be16(pcie_reg_fpga_base + FPGA_REG1C,
-		 ~(endpoint | reset_off) &
-		 (rootpoint | in_be16(pcie_reg_fpga_base + FPGA_REG1C)));
-
-	/*
-	 * Leave device in reset for a while after powering on the
-	 * slot to give it a chance to initialize.
-	 */
-	mdelay(250);
-
-	out_be16(pcie_reg_fpga_base + FPGA_REG1C,
-		 reset_off | in_be16(pcie_reg_fpga_base + FPGA_REG1C));
-
-	iounmap(pcie_reg_fpga_base);
-}
-
-static void __init
-yucca_setup_hoses(void)
-{
-	struct pci_controller *hose;
-	char name[20];
-	int i;
-
-	if (0 && ppc440spe_init_pcie()) {
-		printk(KERN_WARNING "PPC440SPe PCI Express initialization failed\n");
-		return;
-	}
-
-	for (i = 0; i <= 2; ++i) {
-		if (!yucca_pcie_card_present(i))
-			continue;
-
-		printk(KERN_INFO "PCIE%d: card present\n", i);
-		yucca_setup_pcie_fpga_rootpoint(i);
-		if (ppc440spe_init_pcie_rootport(i)) {
-			printk(KERN_WARNING "PCIE%d: initialization failed\n", i);
-			continue;
-		}
-
-		hose = pcibios_alloc_controller();
-		if (!hose)
-			return;
-
-		sprintf(name, "PCIE%d host bridge", i);
-		pci_init_resource(&hose->io_resource,
-				  YUCCA_PCIX_LOWER_IO,
-				  YUCCA_PCIX_UPPER_IO,
-				  IORESOURCE_IO,
-				  name);
-
-		hose->mem_space.start = YUCCA_PCIE_LOWER_MEM +
-			i * YUCCA_PCIE_MEM_SIZE;
-		hose->mem_space.end   = hose->mem_space.start +
-			YUCCA_PCIE_MEM_SIZE - 1;
-
-		pci_init_resource(&hose->mem_resources[0],
-				  hose->mem_space.start,
-				  hose->mem_space.end,
-				  IORESOURCE_MEM,
-				  name);
-
-		hose->first_busno = 0;
-		hose->last_busno  = 15;
-		hose_type[hose->index] = HOSE_PCIE0 + i;
-
-		ppc440spe_setup_pcie(hose, i);
-		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-	}
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = yucca_map_irq;
-}
-
-TODC_ALLOC();
-
-static void __init
-yucca_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup ioremapped serial port access */
-	memset(&port, 0, sizeof(port));
-	port.membase = ioremap64(PPC440SPE_UART0_ADDR, 8);
-	port.irq = UART0_INT;
-	port.uartclk = clocks.uart0;
-	port.regshift = 0;
-	port.iotype = UPIO_MEM;
-	port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
-	port.line = 0;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 0 failed\n");
-	}
-
-	port.membase = ioremap64(PPC440SPE_UART1_ADDR, 8);
-	port.irq = UART1_INT;
-	port.uartclk = clocks.uart1;
-	port.line = 1;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 1 failed\n");
-	}
-
-	port.membase = ioremap64(PPC440SPE_UART2_ADDR, 8);
-	port.irq = UART2_INT;
-	port.uartclk = BASE_BAUD;
-	port.line = 2;
-
-	if (early_serial_setup(&port) != 0) {
-		printk("Early serial init of port 2 failed\n");
-	}
-}
-
-static void __init
-yucca_setup_arch(void)
-{
-	yucca_set_emacdata();
-
-#if !defined(CONFIG_BDI_SWITCH)
-	/*
-	 * The Abatron BDI JTAG debugger does not tolerate others
-	 * mucking with the debug registers.
-	 */
-	mtspr(SPRN_DBCR0, (DBCR0_TDE | DBCR0_IDM));
-#endif
-
-	/*
-	 * Determine various clocks.
-	 * To be completely correct we should get SysClk
-	 * from FPGA, because it can be changed by on-board switches
-	 * --ebs
-	 */
-	/* 440GX and 440SPe clocking is the same - rd */
-	ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200);
-	ocp_sys_info.opb_bus_freq = clocks.opb;
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000/HZ;
-
-	/* Setup PCIXn host bridges */
-	yucca_setup_hoses();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	yucca_early_serial_map();
-
-	/* Identify the system */
-	printk("Yucca port (Roland Dreier <rolandd@cisco.com>)\n");
-}
-
-void __init platform_init(unsigned long r3, unsigned long r4,
-		unsigned long r5, unsigned long r6, unsigned long r7)
-{
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-
-	ppc_md.setup_arch = yucca_setup_arch;
-	ppc_md.show_cpuinfo = yucca_show_cpuinfo;
-	ppc_md.find_end_of_memory = ibm440sp_find_end_of_memory;
-	ppc_md.get_irq = NULL;		/* Set in ppc4xx_pic_init() */
-
-	ppc_md.calibrate_decr = yucca_calibrate_decr;
-#ifdef CONFIG_KGDB
-	ppc_md.early_serial_map = yucca_early_serial_map;
-#endif
-}
diff --git a/arch/ppc/platforms/4xx/yucca.h b/arch/ppc/platforms/4xx/yucca.h
deleted file mode 100644
index bc9684e66a84..000000000000
--- a/arch/ppc/platforms/4xx/yucca.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Yucca board definitions
- *
- * Roland Dreier <rolandd@cisco.com> (based on luan.h by Matt Porter)
- *
- * Copyright 2004-2005 MontaVista Software Inc.
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_YUCCA_H__
-#define __ASM_YUCCA_H__
-
-#include <platforms/4xx/ppc440spe.h>
-
-/* F/W TLB mapping used in bootloader glue to reset EMAC */
-#define PPC44x_EMAC0_MR0	0xa0000800
-
-/* Location of MAC addresses in PIBS image */
-#define PIBS_FLASH_BASE		0xffe00000
-#define PIBS_MAC_BASE		(PIBS_FLASH_BASE+0x1b0400)
-
-/* External timer clock frequency */
-#define YUCCA_TMR_CLK		25000000
-
-/*
- * FPGA registers
- */
-#define YUCCA_FPGA_REG_BASE			0x00000004e2000000ULL
-#define YUCCA_FPGA_REG_SIZE			0x24
-
-#define FPGA_REG1A				0x1a
-
-#define FPGA_REG1A_PE0_GLED			0x8000
-#define FPGA_REG1A_PE1_GLED			0x4000
-#define FPGA_REG1A_PE2_GLED			0x2000
-#define FPGA_REG1A_PE0_YLED			0x1000
-#define FPGA_REG1A_PE1_YLED			0x0800
-#define FPGA_REG1A_PE2_YLED			0x0400
-#define FPGA_REG1A_PE0_PWRON			0x0200
-#define FPGA_REG1A_PE1_PWRON			0x0100
-#define FPGA_REG1A_PE2_PWRON			0x0080
-#define FPGA_REG1A_PE0_REFCLK_ENABLE		0x0040
-#define FPGA_REG1A_PE1_REFCLK_ENABLE		0x0020
-#define FPGA_REG1A_PE2_REFCLK_ENABLE		0x0010
-#define FPGA_REG1A_PE_SPREAD0			0x0008
-#define FPGA_REG1A_PE_SPREAD1			0x0004
-#define FPGA_REG1A_PE_SELSOURCE_0		0x0002
-#define FPGA_REG1A_PE_SELSOURCE_1		0x0001
-
-#define FPGA_REG1C				0x1c
-
-#define FPGA_REG1C_PE0_ROOTPOINT		0x8000
-#define FPGA_REG1C_PE1_ENDPOINT			0x4000
-#define FPGA_REG1C_PE2_ENDPOINT			0x2000
-#define FPGA_REG1C_PE0_PRSNT			0x1000
-#define FPGA_REG1C_PE1_PRSNT			0x0800
-#define FPGA_REG1C_PE2_PRSNT			0x0400
-#define FPGA_REG1C_PE0_WAKE			0x0080
-#define FPGA_REG1C_PE1_WAKE			0x0040
-#define FPGA_REG1C_PE2_WAKE			0x0020
-#define FPGA_REG1C_PE0_PERST			0x0010
-#define FPGA_REG1C_PE1_PERST			0x0008
-#define FPGA_REG1C_PE2_PERST			0x0004
-
-/*
- * Serial port defines
- */
-#define RS_TABLE_SIZE	3
-
-/* PIBS defined UART mappings, used before early_serial_setup */
-#define UART0_IO_BASE	0xa0000200
-#define UART1_IO_BASE	0xa0000300
-#define UART2_IO_BASE	0xa0000600
-
-#define BASE_BAUD	11059200
-#define STD_UART_OP(num)					\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,			\
-		(ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST),	\
-		iomem_base: (void*)UART##num##_IO_BASE,		\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)		\
-	STD_UART_OP(2)
-
-/* PCI support */
-#define YUCCA_PCIX_LOWER_IO	0x00000000
-#define YUCCA_PCIX_UPPER_IO	0x0000ffff
-#define YUCCA_PCIX_LOWER_MEM	0x80000000
-#define YUCCA_PCIX_UPPER_MEM	0x8fffffff
-#define YUCCA_PCIE_LOWER_MEM	0x90000000
-#define YUCCA_PCIE_MEM_SIZE	0x10000000
-
-#define YUCCA_PCIX_MEM_SIZE	0x10000000
-#define YUCCA_PCIX_MEM_OFFSET	0x00000000
-#define YUCCA_PCIE_MEM_SIZE	0x10000000
-#define YUCCA_PCIE_MEM_OFFSET	0x00000000
-
-#endif				/* __ASM_YUCCA_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile
deleted file mode 100644
index 6260231987cb..000000000000
--- a/arch/ppc/platforms/Makefile
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-$(CONFIG_PPC_PREP)		+= prep_pci.o prep_setup.o
-obj-$(CONFIG_PREP_RESIDUAL)	+= residual.o
-obj-$(CONFIG_TQM8260)		+= tqm8260_setup.o
-obj-$(CONFIG_CPCI690)		+= cpci690.o
-obj-$(CONFIG_EV64260)		+= ev64260.o
-obj-$(CONFIG_CHESTNUT)		+= chestnut.o
-obj-$(CONFIG_LOPEC)		+= lopec.o
-obj-$(CONFIG_KATANA)		+= katana.o
-obj-$(CONFIG_HDPU)		+= hdpu.o
-obj-$(CONFIG_MVME5100)		+= mvme5100.o
-obj-$(CONFIG_PAL4)		+= pal4_setup.o pal4_pci.o
-obj-$(CONFIG_POWERPMC250)	+= powerpmc250.o
-obj-$(CONFIG_PPLUS)		+= pplus.o
-obj-$(CONFIG_PRPMC750)		+= prpmc750.o
-obj-$(CONFIG_PRPMC800)		+= prpmc800.o
-obj-$(CONFIG_RADSTONE_PPC7D)	+= radstone_ppc7d.o
-obj-$(CONFIG_SANDPOINT)		+= sandpoint.o
-obj-$(CONFIG_SBC82xx)		+= sbc82xx.o
-obj-$(CONFIG_SPRUCE)		+= spruce.o
-obj-$(CONFIG_LITE5200)		+= lite5200.o
-obj-$(CONFIG_EV64360)		+= ev64360.o
diff --git a/arch/ppc/platforms/bseip.h b/arch/ppc/platforms/bseip.h
deleted file mode 100644
index 691f4a52b0a5..000000000000
--- a/arch/ppc/platforms/bseip.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Bright Star Engineering ip-Engine board.  Copied from the MBX stuff.
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- */
-#ifndef __MACH_BSEIP_DEFS
-#define __MACH_BSEIP_DEFS
-
-#ifndef __ASSEMBLY__
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
-	unsigned char	bi_enetaddr[6];
-	unsigned int	bi_baudrate;
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-/* Memory map is configured by the PROM startup.
- * All we need to get started is the IMMR.
- */
-#define IMAP_ADDR		((uint)0xff000000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-#define PCMCIA_MEM_ADDR		((uint)0x04000000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-#endif	/* !__ASSEMBLY__ */
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif
diff --git a/arch/ppc/platforms/ccm.h b/arch/ppc/platforms/ccm.h
deleted file mode 100644
index 69000b1c7a4c..000000000000
--- a/arch/ppc/platforms/ccm.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Siemens Card Controller Module specific definitions
- *
- * Copyright (C) 2001-2002 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_CCM_H
-#define __MACH_CCM_H
-
-
-#include <asm/ppcboot.h>
-
-#define	CCM_IMMR_BASE    0xF0000000	/* phys. addr of IMMR			*/
-#define	CCM_IMAP_SIZE   (64 * 1024)	/* size of mapped area			*/
-
-#define	IMAP_ADDR     CCM_IMMR_BASE	/* physical base address of IMMR area	*/
-#define IMAP_SIZE     CCM_IMAP_SIZE	/* mapped size of IMMR area		*/
-
-#define	FEC_INTERRUPT	13		/* = SIU_LEVEL6				*/
-#define	DEC_INTERRUPT	11		/* = SIU_LEVEL5				*/
-#define	CPM_INTERRUPT	 9		/* = SIU_LEVEL4				*/
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_CCM_H */
diff --git a/arch/ppc/platforms/chestnut.c b/arch/ppc/platforms/chestnut.c
deleted file mode 100644
index 27c140f218ed..000000000000
--- a/arch/ppc/platforms/chestnut.c
+++ /dev/null
@@ -1,574 +0,0 @@
-/*
- * Board setup routines for IBM Chestnut
- *
- * Author: <source@mvista.com>
- *
- * <2004> (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/blkdev.h>
-#include <linux/console.h>
-#include <linux/root_dev.h>
-#include <linux/initrd.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/physmap.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/hw_irq.h>
-#include <asm/machdep.h>
-#include <asm/kgdb.h>
-#include <asm/bootinfo.h>
-#include <asm/mv64x60.h>
-#include <platforms/chestnut.h>
-
-static void __iomem *sram_base; /* Virtual addr of Internal SRAM */
-static void __iomem *cpld_base; /* Virtual addr of CPLD Regs */
-
-static mv64x60_handle_t	bh;
-
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_init(int, struct uart_port *);
-extern void mv64360_pcibios_fixup(mv64x60_handle_t *bh);
-
-#define CHESTNUT_PRESERVE_MASK (BIT(MV64x60_CPU2DEV_0_WIN) | \
-				BIT(MV64x60_CPU2DEV_1_WIN) | \
-				BIT(MV64x60_CPU2DEV_2_WIN) | \
-				BIT(MV64x60_CPU2DEV_3_WIN) | \
-				BIT(MV64x60_CPU2BOOT_WIN))
-/**************************************************************************
- * FUNCTION: chestnut_calibrate_decr
- *
- * DESCRIPTION: initialize decrementer interrupt frequency (used as system
- *              timer)
- *
- ****/
-static void __init
-chestnut_calibrate_decr(void)
-{
-	ulong freq;
-
-	freq = CHESTNUT_BUS_SPEED / 4;
-
-	printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-		freq/1000000, freq%1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
-
-static int
-chestnut_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: 750FX/GX Eval Board (Chestnut/Buckeye)\n");
-
-	return 0;
-}
-
-/**************************************************************************
- * FUNCTION: chestnut_find_end_of_memory
- *
- * DESCRIPTION: ppc_md memory size callback
- *
- ****/
-unsigned long __init
-chestnut_find_end_of_memory(void)
-{
-   	static int  mem_size = 0;
-
-   	if (mem_size == 0) {
-      		mem_size = mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
-				MV64x60_TYPE_MV64460);
-   	}
-   	return mem_size;
-}
-
-#if defined(CONFIG_SERIAL_8250)
-static void __init
-chestnut_early_serial_map(void)
-{
-	struct uart_port port;
-
-	/* Setup serial port access */
-	memset(&port, 0, sizeof(port));
-	port.uartclk = BASE_BAUD * 16;
-	port.irq = UART0_INT;
-	port.flags = STD_COM_FLAGS | UPF_IOREMAP;
-	port.iotype = UPIO_MEM;
-	port.mapbase = CHESTNUT_UART0_IO_BASE;
-	port.regshift = 0;
-
-	if (early_serial_setup(&port) != 0)
-		printk("Early serial init of port 0 failed\n");
-
-	/* Assume early_serial_setup() doesn't modify serial_req */
-	port.line = 1;
-	port.irq = UART1_INT;
-	port.mapbase = CHESTNUT_UART1_IO_BASE;
-
-	if (early_serial_setup(&port) != 0)
-		printk("Early serial init of port 1 failed\n");
-}
-#endif
-
-/**************************************************************************
- * FUNCTION: chestnut_map_irq
- *
- * DESCRIPTION: 0 return since PCI IRQs not needed
- *
- ****/
-static int __init
-chestnut_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] = {
-		{CHESTNUT_PCI_SLOT0_IRQ, CHESTNUT_PCI_SLOT0_IRQ,
-		 CHESTNUT_PCI_SLOT0_IRQ, CHESTNUT_PCI_SLOT0_IRQ},
-		{CHESTNUT_PCI_SLOT1_IRQ, CHESTNUT_PCI_SLOT1_IRQ,
-		 CHESTNUT_PCI_SLOT1_IRQ, CHESTNUT_PCI_SLOT1_IRQ},
-		{CHESTNUT_PCI_SLOT2_IRQ, CHESTNUT_PCI_SLOT2_IRQ,
-		 CHESTNUT_PCI_SLOT2_IRQ, CHESTNUT_PCI_SLOT2_IRQ},
-		{CHESTNUT_PCI_SLOT3_IRQ, CHESTNUT_PCI_SLOT3_IRQ,
-		 CHESTNUT_PCI_SLOT3_IRQ, CHESTNUT_PCI_SLOT3_IRQ},
-	};
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-
-/**************************************************************************
- * FUNCTION: chestnut_setup_bridge
- *
- * DESCRIPTION: initalize board-specific settings on the MV64360
- *
- ****/
-static void __init
-chestnut_setup_bridge(void)
-{
-	struct mv64x60_setup_info	si;
-	int i;
-
-   	if ( ppc_md.progress )
-		ppc_md.progress("chestnut_setup_bridge: enter", 0);
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	/* setup only PCI bus 0 (bus 1 not used) */
-	si.pci_0.enable_bus = 1;
-	si.pci_0.pci_io.cpu_base = CHESTNUT_PCI0_IO_PROC_ADDR;
-	si.pci_0.pci_io.pci_base_hi = 0;
-	si.pci_0.pci_io.pci_base_lo = CHESTNUT_PCI0_IO_PCI_ADDR;
-	si.pci_0.pci_io.size = CHESTNUT_PCI0_IO_SIZE;
-	si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE; /* no swapping */
-	si.pci_0.pci_mem[0].cpu_base = CHESTNUT_PCI0_MEM_PROC_ADDR;
-	si.pci_0.pci_mem[0].pci_base_hi = CHESTNUT_PCI0_MEM_PCI_HI_ADDR;
-	si.pci_0.pci_mem[0].pci_base_lo = CHESTNUT_PCI0_MEM_PCI_LO_ADDR;
-	si.pci_0.pci_mem[0].size = CHESTNUT_PCI0_MEM_SIZE;
-	si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE; /* no swapping */
-	si.pci_0.pci_cmd_bits = 0;
-	si.pci_0.latency_timer = 0x80;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-#else
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
-#endif
-	}
-
-   	/* Lookup host bridge - on CPU 0 - no SMP support */
-   	if (mv64x60_init(&bh, &si)) {
-        	printk("\n\nPCI Bridge initialization failed!\n");
-   	}
-
-	pci_dram_offset = 0;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = chestnut_map_irq;
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
-}
-
-void __init
-chestnut_setup_peripherals(void)
-{
-   	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-			CHESTNUT_BOOT_8BIT_BASE, CHESTNUT_BOOT_8BIT_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
-			CHESTNUT_32BIT_BASE, CHESTNUT_32BIT_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
-			CHESTNUT_CPLD_BASE, CHESTNUT_CPLD_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-	cpld_base = ioremap(CHESTNUT_CPLD_BASE, CHESTNUT_CPLD_SIZE);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
-			CHESTNUT_UART_BASE, CHESTNUT_UART_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
-			CHESTNUT_FRAM_BASE, CHESTNUT_FRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-
-   	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-			CHESTNUT_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-
-#ifdef CONFIG_NOT_COHERENT_CACHE
-   	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b0);
-#else
-   	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
-#endif
-	sram_base = ioremap(CHESTNUT_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE);
-   	memset(sram_base, 0, MV64360_SRAM_SIZE);
-
-	/*
-	 * Configure MPP pins for PCI DMA
-	 *
-	 * PCI Slot	GNT pin		REQ pin
-	 *	0	MPP16		MPP17
-	 *	1	MPP18		MPP19
-	 *	2	MPP20		MPP21
-	 *	3	MPP22		MPP23
-	 */
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_2,
-			(0x1 << 0)  |	/* MPPSel16 PCI0_GNT[0] */
-			(0x1 << 4)  |	/* MPPSel17 PCI0_REQ[0] */
-			(0x1 << 8)  |	/* MPPSel18 PCI0_GNT[1] */
-			(0x1 << 12) |	/* MPPSel19 PCI0_REQ[1] */
-			(0x1 << 16) |	/* MPPSel20 PCI0_GNT[2] */
-			(0x1 << 20) |	/* MPPSel21 PCI0_REQ[2] */
-			(0x1 << 24) |	/* MPPSel22 PCI0_GNT[3] */
-			(0x1 << 28));	/* MPPSel23 PCI0_REQ[3] */
-	/*
-	 * Set unused MPP pins for output, as per schematic note
-	 *
-	 * Unused Pins: MPP01, MPP02, MPP04, MPP05, MPP06
-	 *		MPP09, MPP10, MPP13, MPP14, MPP15
-	 */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_0,
-			(0xf << 4)  |	/* MPPSel01 GPIO[1] */
-			(0xf << 8)  |	/* MPPSel02 GPIO[2] */
-			(0xf << 16) |	/* MPPSel04 GPIO[4] */
-			(0xf << 20) |	/* MPPSel05 GPIO[5] */
-			(0xf << 24));	/* MPPSel06 GPIO[6] */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1,
-			(0xf << 4)  |	/* MPPSel09 GPIO[9] */
-			(0xf << 8)  |	/* MPPSel10 GPIO[10] */
-			(0xf << 20) |	/* MPPSel13 GPIO[13] */
-			(0xf << 24) |	/* MPPSel14 GPIO[14] */
-			(0xf << 28));	/* MPPSel15 GPIO[15] */
-	mv64x60_set_bits(&bh, MV64x60_GPP_IO_CNTL, /* Output */
-			BIT(1)  | BIT(2)  | BIT(4)  | BIT(5)  | BIT(6)  |
-			BIT(9)  | BIT(10) | BIT(13) | BIT(14) | BIT(15));
-
-   	/*
-    	 * Configure the following MPP pins to indicate a level
-    	 * triggered interrupt
-    	 *
-       	 * MPP24 - Board Reset (just map the MPP & GPP for chestnut_reset)
-       	 * MPP25 - UART A  (high)
-       	 * MPP26 - UART B  (high)
-	 * MPP28 - PCI Slot 3 (low)
-	 * MPP29 - PCI Slot 2 (low)
-	 * MPP30 - PCI Slot 1 (low)
-	 * MPP31 - PCI Slot 0 (low)
-    	 */
-        mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_3,
-                        BIT(3) | BIT(2) | BIT(1) | BIT(0)	 | /* MPP 24 */
-                        BIT(7) | BIT(6) | BIT(5) | BIT(4)	 | /* MPP 25 */
-                        BIT(11) | BIT(10) | BIT(9) | BIT(8)	 | /* MPP 26 */
-			BIT(19) | BIT(18) | BIT(17) | BIT(16)	 | /* MPP 28 */
-			BIT(23) | BIT(22) | BIT(21) | BIT(20)	 | /* MPP 29 */
-			BIT(27) | BIT(26) | BIT(25) | BIT(24)	 | /* MPP 30 */
-			BIT(31) | BIT(30) | BIT(29) | BIT(28));    /* MPP 31 */
-
-   	/*
-	 * Define GPP 25 (high), 26 (high), 28 (low), 29 (low), 30 (low),
-	 * 31 (low) interrupt polarity input signal and level triggered
-    	 */
-   	mv64x60_clr_bits(&bh, MV64x60_GPP_LEVEL_CNTL, BIT(25) | BIT(26));
-   	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL,
-			BIT(28) | BIT(29) | BIT(30) | BIT(31));
-   	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL,
-			BIT(25) | BIT(26) | BIT(28) | BIT(29) | BIT(30) |
-			BIT(31));
-
-   	/* Config GPP interrupt controller to respond to level trigger */
-   	mv64x60_set_bits(&bh, MV64360_COMM_ARBITER_CNTL, BIT(10));
-
-   	/*
-    	 * Dismiss and then enable interrupt on GPP interrupt cause for CPU #0
-    	 */
-   	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE,
-			~(BIT(25) | BIT(26) | BIT(28) | BIT(29) | BIT(30) |
-			  BIT(31)));
-   	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK,
-			BIT(25) | BIT(26) | BIT(28) | BIT(29) | BIT(30) |
-			BIT(31));
-
-   	/*
-    	 * Dismiss and then enable interrupt on CPU #0 high cause register
-    	 * BIT27 summarizes GPP interrupts 24-31
-    	 */
-   	mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, BIT(27));
-
-   	if (ppc_md.progress)
-		ppc_md.progress("chestnut_setup_bridge: exit", 0);
-}
-
-/**************************************************************************
- * FUNCTION: chestnut_setup_arch
- *
- * DESCRIPTION: ppc_md machine configuration callback
- *
- ****/
-static void __init
-chestnut_setup_arch(void)
-{
-	if (ppc_md.progress)
-      		ppc_md.progress("chestnut_setup_arch: enter", 0);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000 / HZ;
-
-   	/* if the time base value is greater than bus freq/4 (the TB and
-    	* decrementer tick rate) + signed integer rollover value, we
-    	* can spend a fair amount of time waiting for the rollover to
-    	* happen.  To get around this, initialize the time base register
-    	* to a "safe" value.
-    	*/
-   	set_tb(0, 0);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-   	/*
-    	* Set up the L2CR register.
-    	*/
- 	_set_L2CR(_get_L2CR() | L2CR_L2E);
-
-	chestnut_setup_bridge();
-	chestnut_setup_peripherals();
-
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
-#if defined(CONFIG_SERIAL_8250)
-	chestnut_early_serial_map();
-#endif
-
-	/* Identify the system */
-	printk(KERN_INFO "System Identification: IBM 750FX/GX Eval Board\n");
-	printk(KERN_INFO "IBM 750FX/GX port (C) 2004 MontaVista Software, Inc."
-		" (source@mvista.com)\n");
-
-	if (ppc_md.progress)
-      		ppc_md.progress("chestnut_setup_arch: exit", 0);
-}
-
-#ifdef CONFIG_MTD_PHYSMAP
-static struct mtd_partition ptbl;
-
-static int __init
-chestnut_setup_mtd(void)
-{
-	memset(&ptbl, 0, sizeof(ptbl));
-
-	ptbl.name = "User FS";
-	ptbl.size = CHESTNUT_32BIT_SIZE;
-
-	physmap_map.size = CHESTNUT_32BIT_SIZE;
-	physmap_set_partitions(&ptbl, 1);
-	return 0;
-}
-
-arch_initcall(chestnut_setup_mtd);
-#endif
-
-/**************************************************************************
- * FUNCTION: chestnut_restart
- *
- * DESCRIPTION: ppc_md machine reset callback
- *              reset the board via the CPLD command register
- *
- ****/
-static void
-chestnut_restart(char *cmd)
-{
-	volatile ulong i = 10000000;
-
-	local_irq_disable();
-
-        /*
-         * Set CPLD Reg 3 bit 0 to 1 to allow MPP signals on reset to work
-         *
-         * MPP24 - board reset
-         */
-   	writeb(0x1, cpld_base + 3);
-
-	/* GPP pin tied to MPP earlier */
-        mv64x60_set_bits(&bh, MV64x60_GPP_VALUE_SET, BIT(24));
-
-   	while (i-- > 0);
-   	panic("restart failed\n");
-}
-
-static void
-chestnut_halt(void)
-{
-	local_irq_disable();
-	for (;;);
-	/* NOTREACHED */
-}
-
-static void
-chestnut_power_off(void)
-{
-	chestnut_halt();
-	/* NOTREACHED */
-}
-
-/**************************************************************************
- * FUNCTION: chestnut_map_io
- *
- * DESCRIPTION: configure fixed memory-mapped IO
- *
- ****/
-static void __init
-chestnut_map_io(void)
-{
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	io_block_mapping(CHESTNUT_UART_BASE, CHESTNUT_UART_BASE, 0x100000,
-		_PAGE_IO);
-#endif
-}
-
-/**************************************************************************
- * FUNCTION: chestnut_set_bat
- *
- * DESCRIPTION: configures a (temporary) bat mapping for early access to
- *              device I/O
- *
- ****/
-static __inline__ void
-chestnut_set_bat(void)
-{
-        mb();
-        mtspr(SPRN_DBAT3U, 0xf0001ffe);
-        mtspr(SPRN_DBAT3L, 0xf000002a);
-        mb();
-}
-
-/**************************************************************************
- * FUNCTION: platform_init
- *
- * DESCRIPTION: main entry point for configuring board-specific machine
- *              callbacks
- *
- ****/
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-        /* Copy the kernel command line arguments to a safe place. */
-
-        if (r6) {
-                *(char *) (r7 + KERNELBASE) = 0;
-                strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-        }
-
-	isa_mem_base = 0;
-
-	ppc_md.setup_arch = chestnut_setup_arch;
-	ppc_md.show_cpuinfo = chestnut_show_cpuinfo;
-	ppc_md.init_IRQ = mv64360_init_irq;
-	ppc_md.get_irq = mv64360_get_irq;
-	ppc_md.init = NULL;
-
-	ppc_md.find_end_of_memory = chestnut_find_end_of_memory;
-	ppc_md.setup_io_mappings  = chestnut_map_io;
-
-	ppc_md.restart = chestnut_restart;
-   	ppc_md.power_off = chestnut_power_off;
-   	ppc_md.halt = chestnut_halt;
-
-	ppc_md.time_init = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.calibrate_decr = chestnut_calibrate_decr;
-
-	ppc_md.nvram_read_val = NULL;
-	ppc_md.nvram_write_val = NULL;
-
-	ppc_md.heartbeat = NULL;
-
-	bh.p_base = CONFIG_MV64X60_NEW_BASE;
-
-	chestnut_set_bat();
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG)
-	ppc_md.progress = gen550_progress;
-#endif
-#if defined(CONFIG_KGDB)
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-
-	if (ppc_md.progress)
-                ppc_md.progress("chestnut_init(): exit", 0);
-}
diff --git a/arch/ppc/platforms/chestnut.h b/arch/ppc/platforms/chestnut.h
deleted file mode 100644
index e00fd9f8bbd0..000000000000
--- a/arch/ppc/platforms/chestnut.h
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * Definitions for IBM 750FXGX Eval (Chestnut)
- *
- * Author: <source@mvista.com>
- *
- * Based on Artesyn Katana code done by Tim Montgomery <timm@artesyncp.com>
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by Mark A. Greer <mgreer@mvista.com>
- *
- * <2004> (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * This is the CPU physical memory map (windows must be at least 1MB and start
- * on a boundary that is a multiple of the window size):
- *
- * Seems on the IBM 750FXGX Eval board, the MV64460 Registers can be in
- * only 2 places per switch U17 0x14000000 or 0xf1000000 easily - chose to
- * implement at 0xf1000000 only at this time
- *
- *    0xfff00000-0xffffffff      - 8 Flash
- *    0xffe00000-0xffefffff      - BOOT SRAM
- *    0xffd00000-0xffd00004      - CPLD
- *    0xffc00000-0xffc0000f      - UART
- *    0xffb00000-0xffb07fff      - FRAM
- *    0xff840000-0xffafffff      - *** HOLE ***
- *    0xff800000-0xff83ffff      - MV64460 Integrated SRAM
- *    0xfe000000-0xff8fffff      - *** HOLE ***
- *    0xfc000000-0xfdffffff      - 32bit Flash
- *    0xf1010000-0xfbffffff      - *** HOLE ***
- *    0xf1000000-0xf100ffff      - MV64460 Registers
- */
-
-#ifndef __PPC_PLATFORMS_CHESTNUT_H__
-#define __PPC_PLATFORMS_CHESTNUT_H__
-
-#define CHESTNUT_BOOT_8BIT_BASE			0xfff00000
-#define CHESTNUT_BOOT_8BIT_SIZE_ACTUAL		(1024*1024)
-#define CHESTNUT_BOOT_SRAM_BASE			0xffe00000
-#define CHESTNUT_BOOT_SRAM_SIZE_ACTUAL		(1024*1024)
-#define CHESTNUT_CPLD_BASE			0xffd00000
-#define CHESTNUT_CPLD_SIZE_ACTUAL		5
-#define CHESTNUT_CPLD_REG3			(CHESTNUT_CPLD_BASE+3)
-#define CHESTNUT_UART_BASE			0xffc00000
-#define CHESTNUT_UART_SIZE_ACTUAL		16
-#define CHESTNUT_FRAM_BASE			0xffb00000
-#define CHESTNUT_FRAM_SIZE_ACTUAL		(32*1024)
-#define CHESTNUT_INTERNAL_SRAM_BASE		0xff800000
-#define CHESTNUT_32BIT_BASE			0xfc000000
-#define CHESTNUT_32BIT_SIZE			(32*1024*1024)
-
-#define CHESTNUT_BOOT_8BIT_SIZE		max(MV64360_WINDOW_SIZE_MIN, \
-					CHESTNUT_BOOT_8BIT_SIZE_ACTUAL)
-#define CHESTNUT_BOOT_SRAM_SIZE		max(MV64360_WINDOW_SIZE_MIN, \
-					CHESTNUT_BOOT_SRAM_SIZE_ACTUAL)
-#define CHESTNUT_CPLD_SIZE		max(MV64360_WINDOW_SIZE_MIN, \
-					CHESTNUT_CPLD_SIZE_ACTUAL)
-#define CHESTNUT_UART_SIZE		max(MV64360_WINDOW_SIZE_MIN, \
-					CHESTNUT_UART_SIZE_ACTUAL)
-#define CHESTNUT_FRAM_SIZE		max(MV64360_WINDOW_SIZE_MIN, \
-					CHESTNUT_FRAM_SIZE_ACTUAL)
-
-#define CHESTNUT_BUS_SPEED		200000000
-#define CHESTNUT_PIBS_DATABASE		0xf0000 /* from PIBS src code */
-
-#define	KATANA_ETH0_PHY_ADDR			12
-#define	KATANA_ETH1_PHY_ADDR			11
-#define	KATANA_ETH2_PHY_ADDR			4
-
-#define CHESTNUT_ETH_TX_QUEUE_SIZE		800
-#define CHESTNUT_ETH_RX_QUEUE_SIZE		400
-
-/*
- * PCI windows
- */
-
-#define CHESTNUT_PCI0_MEM_PROC_ADDR	0x80000000
-#define CHESTNUT_PCI0_MEM_PCI_HI_ADDR	0x00000000
-#define CHESTNUT_PCI0_MEM_PCI_LO_ADDR	0x80000000
-#define CHESTNUT_PCI0_MEM_SIZE		0x10000000
-#define CHESTNUT_PCI0_IO_PROC_ADDR	0xa0000000
-#define CHESTNUT_PCI0_IO_PCI_ADDR	0x00000000
-#define CHESTNUT_PCI0_IO_SIZE		0x01000000
-
-/*
- * Board-specific IRQ info
- */
-#define CHESTNUT_PCI_SLOT0_IRQ	(64 + 31)
-#define CHESTNUT_PCI_SLOT1_IRQ	(64 + 30)
-#define CHESTNUT_PCI_SLOT2_IRQ	(64 + 29)
-#define CHESTNUT_PCI_SLOT3_IRQ	(64 + 28)
-
-/* serial port definitions */
-#define CHESTNUT_UART0_IO_BASE  (CHESTNUT_UART_BASE + 8)
-#define CHESTNUT_UART1_IO_BASE  CHESTNUT_UART_BASE
-
-#define UART0_INT           	(64 + 25)
-#define UART1_INT        	(64 + 26)
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define RS_TABLE_SIZE  64
-#else
-#define RS_TABLE_SIZE  2
-#endif
-
-/* Rate for the 3.6864 Mhz clock for the onboard serial chip */
-#define BASE_BAUD 		(3686400 / 16)
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
-#endif
-
-#define STD_UART_OP(num)						\
-        { 0, BASE_BAUD, 0, UART##num##_INT, STD_COM_FLAGS,		\
-                iomem_base: (u8 *)CHESTNUT_UART##num##_IO_BASE,	\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS        \
-        STD_UART_OP(0)          \
-        STD_UART_OP(1)
-
-#endif /* __PPC_PLATFORMS_CHESTNUT_H__ */
diff --git a/arch/ppc/platforms/cpci690.c b/arch/ppc/platforms/cpci690.c
deleted file mode 100644
index 07f672d58767..000000000000
--- a/arch/ppc/platforms/cpci690.c
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- * Board setup routines for the Force CPCI690 board.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2003 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This programr
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/seq_file.h>
-#include <linux/console.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-#include <asm/bootinfo.h>
-#include <asm/machdep.h>
-#include <asm/todc.h>
-#include <asm/time.h>
-#include <asm/mv64x60.h>
-#include <platforms/cpci690.h>
-
-#define BOARD_VENDOR	"Force"
-#define BOARD_MACHINE	"CPCI690"
-
-/* Set IDE controllers into Native mode? */
-#define SET_PCI_IDE_NATIVE
-
-static struct mv64x60_handle	bh;
-static void __iomem *cpci690_br_base;
-
-TODC_ALLOC();
-
-static int __init
-cpci690_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller	*hose = pci_bus_to_hose(dev->bus->number);
-
-	if (hose->index == 0) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 * 	   A   B   C   D
-		 */
-		{
-			{ 90, 91, 88, 89 }, /* IDSEL 30/20 - Sentinel */
-		};
-
-		const long min_idsel = 20, max_idsel = 20, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 * 	   A   B   C   D
-		 */
-		{
-			{ 93, 94, 95, 92 }, /* IDSEL 28/18 - PMC slot 2 */
-			{  0,  0,  0,  0 }, /* IDSEL 29/19 - Not used */
-			{ 94, 95, 92, 93 }, /* IDSEL 30/20 - PMC slot 1 */
-		};
-
-		const long min_idsel = 18, max_idsel = 20, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-}
-
-#define	GB	(1024UL * 1024UL * 1024UL)
-
-static u32
-cpci690_get_bus_freq(void)
-{
-	if (boot_mem_size >= (1*GB)) /* bus speed based on mem size */
-		return 100000000;
-	else
-		return 133333333;
-}
-
-static const unsigned int cpu_750xx[32] = { /* 750FX & 750GX */
-	 0,  0,  2,  2,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,/* 0-15*/
-	16, 17, 18, 19, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40,  0 /*16-31*/
-};
-
-static int
-cpci690_get_cpu_freq(void)
-{
-	unsigned long	pll_cfg;
-
-	pll_cfg = (mfspr(SPRN_HID1) & 0xf8000000) >> 27;
-	return cpci690_get_bus_freq() * cpu_750xx[pll_cfg]/2;
-}
-
-static void __init
-cpci690_setup_bridge(void)
-{
-	struct mv64x60_setup_info	si;
-	int				i;
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	si.pci_0.enable_bus = 1;
-	si.pci_0.pci_io.cpu_base = CPCI690_PCI0_IO_START_PROC_ADDR;
-	si.pci_0.pci_io.pci_base_hi = 0;
-	si.pci_0.pci_io.pci_base_lo = CPCI690_PCI0_IO_START_PCI_ADDR;
-	si.pci_0.pci_io.size = CPCI690_PCI0_IO_SIZE;
-	si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_mem[0].cpu_base = CPCI690_PCI0_MEM_START_PROC_ADDR;
-	si.pci_0.pci_mem[0].pci_base_hi = CPCI690_PCI0_MEM_START_PCI_HI_ADDR;
-	si.pci_0.pci_mem[0].pci_base_lo = CPCI690_PCI0_MEM_START_PCI_LO_ADDR;
-	si.pci_0.pci_mem[0].size = CPCI690_PCI0_MEM_SIZE;
-	si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_cmd_bits = 0;
-	si.pci_0.latency_timer = 0x80;
-
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = CPCI690_PCI1_IO_START_PROC_ADDR;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = CPCI690_PCI1_IO_START_PCI_ADDR;
-	si.pci_1.pci_io.size = CPCI690_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = CPCI690_PCI1_MEM_START_PROC_ADDR;
-	si.pci_1.pci_mem[0].pci_base_hi = CPCI690_PCI1_MEM_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[0].pci_base_lo = CPCI690_PCI1_MEM_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[0].size = CPCI690_PCI1_MEM_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x80;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
-		si.cpu_prot_options[i] = 0;
-		si.cpu_snoop_options[i] = GT64260_CPU_SNOOP_WB;
-		si.pci_0.acc_cntl_options[i] =
-			GT64260_PCI_ACC_CNTL_DREADEN |
-			GT64260_PCI_ACC_CNTL_RDPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
-			GT64260_PCI_ACC_CNTL_SWAP_NONE |
-			GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
-		si.pci_0.snoop_options[i] = GT64260_PCI_SNOOP_WB;
-		si.pci_1.acc_cntl_options[i] =
-			GT64260_PCI_ACC_CNTL_DREADEN |
-			GT64260_PCI_ACC_CNTL_RDPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
-			GT64260_PCI_ACC_CNTL_SWAP_NONE |
-			GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
-		si.pci_1.snoop_options[i] = GT64260_PCI_SNOOP_WB;
-	}
-
-        /* Lookup PCI host bridges */
-        if (mv64x60_init(&bh, &si))
-                printk(KERN_ERR "Bridge initialization failed.\n");
-
-	pci_dram_offset = 0; /* System mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = cpci690_map_irq;
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
-
-	bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
-	mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
-	bh.hose_b->last_busno = 0xff;
-	bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
-		bh.hose_b->first_busno);
-}
-
-static void __init
-cpci690_setup_peripherals(void)
-{
-	/* Set up windows to CPLD, RTC/TODC, IPMI. */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, CPCI690_BR_BASE,
-		CPCI690_BR_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-	cpci690_br_base = ioremap(CPCI690_BR_BASE, CPCI690_BR_SIZE);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, CPCI690_TODC_BASE,
-		CPCI690_TODC_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-	TODC_INIT(TODC_TYPE_MK48T35, 0, 0,
-			ioremap(CPCI690_TODC_BASE, CPCI690_TODC_SIZE), 8);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN, CPCI690_IPMI_BASE,
-		CPCI690_IPMI_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-
-	mv64x60_set_bits(&bh, MV64x60_PCI0_ARBITER_CNTL, (1<<31));
-	mv64x60_set_bits(&bh, MV64x60_PCI1_ARBITER_CNTL, (1<<31));
-
-        mv64x60_set_bits(&bh, MV64x60_CPU_MASTER_CNTL, (1<<9)); /* Only 1 cpu */
-
-	/*
-	 * Turn off timer/counters.  Not turning off watchdog timer because
-	 * can't read its reg on the 64260A so don't know if we'll be enabling
-	 * or disabling.
-	 */
-	mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
-			((1<<0) | (1<<8) | (1<<16) | (1<<24)));
-	mv64x60_clr_bits(&bh, GT64260_TIMR_CNTR_4_7_CNTL,
-			((1<<0) | (1<<8) | (1<<16) | (1<<24)));
-
-	/*
-	 * Set MPSC Multiplex RMII
-	 * NOTE: ethernet driver modifies bit 0 and 1
-	 */
-	mv64x60_write(&bh, GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102);
-
-#define GPP_EXTERNAL_INTERRUPTS \
-		((1<<24) | (1<<25) | (1<<26) | (1<<27) | \
-		 (1<<28) | (1<<29) | (1<<30) | (1<<31))
-	/* PCI interrupts are inputs */
-	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, GPP_EXTERNAL_INTERRUPTS);
-	/* PCI interrupts are active low */
-	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, GPP_EXTERNAL_INTERRUPTS);
-
-	/* Clear any pending interrupts for these inputs and enable them. */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~GPP_EXTERNAL_INTERRUPTS);
-	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, GPP_EXTERNAL_INTERRUPTS);
-
-	/* Route MPP interrupt inputs to GPP */
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_2, 0x00000000);
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_3, 0x00000000);
-}
-
-static void __init
-cpci690_setup_arch(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("cpci690_setup_arch: enter", 0);
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef   CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	if (ppc_md.progress)
-		ppc_md.progress("cpci690_setup_arch: Enabling L2 cache", 0);
-
-	/* Enable L2 and L3 caches (if 745x) */
-	_set_L2CR(_get_L2CR() | L2CR_L2E);
-	_set_L3CR(_get_L3CR() | L3CR_L3E);
-
-	if (ppc_md.progress)
-		ppc_md.progress("cpci690_setup_arch: Initializing bridge", 0);
-
-	cpci690_setup_bridge();		/* set up PCI bridge(s) */
-	cpci690_setup_peripherals();	/* set up chip selects/GPP/MPP etc */
-
-	if (ppc_md.progress)
-		ppc_md.progress("cpci690_setup_arch: bridge init complete", 0);
-
-	printk(KERN_INFO "%s %s port (C) 2003 MontaVista Software, Inc. "
-		"(source@mvista.com)\n", BOARD_VENDOR, BOARD_MACHINE);
-
-	if (ppc_md.progress)
-		ppc_md.progress("cpci690_setup_arch: exit", 0);
-}
-
-/* Platform device data fixup routines. */
-#if defined(CONFIG_SERIAL_MPSC)
-static void __init
-cpci690_fixup_mpsc_pdata(struct platform_device *pdev)
-{
-	struct mpsc_pdata *pdata;
-
-	pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
-
-	pdata->max_idle = 40;
-	pdata->default_baud = CPCI690_MPSC_BAUD;
-	pdata->brg_clk_src = CPCI690_MPSC_CLK_SRC;
-	pdata->brg_clk_freq = cpci690_get_bus_freq();
-}
-
-static int
-cpci690_platform_notify(struct device *dev)
-{
-	static struct {
-		char	*bus_id;
-		void	((*rtn)(struct platform_device *pdev));
-	} dev_map[] = {
-		{ MPSC_CTLR_NAME ".0", cpci690_fixup_mpsc_pdata },
-		{ MPSC_CTLR_NAME ".1", cpci690_fixup_mpsc_pdata },
-	};
-	struct platform_device	*pdev;
-	int	i;
-
-	if (dev && dev->bus_id)
-		for (i=0; i<ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-				BUS_ID_SIZE)) {
-
-				pdev = container_of(dev,
-					struct platform_device, dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-#endif
-
-static void
-cpci690_reset_board(void)
-{
-	u32	i = 10000;
-
-	local_irq_disable();
-	out_8((cpci690_br_base + CPCI690_BR_SW_RESET), 0x11);
-
-	while (i != 0) i++;
-	panic("restart failed\n");
-}
-
-static void
-cpci690_restart(char *cmd)
-{
-	cpci690_reset_board();
-}
-
-static void
-cpci690_halt(void)
-{
-	while (1);
-	/* NOTREACHED */
-}
-
-static void
-cpci690_power_off(void)
-{
-	cpci690_halt();
-	/* NOTREACHED */
-}
-
-static int
-cpci690_show_cpuinfo(struct seq_file *m)
-{
-	char	*s;
-
-	seq_printf(m, "cpu MHz\t\t: %d\n",
-		(cpci690_get_cpu_freq() + 500000) / 1000000);
-	seq_printf(m, "bus MHz\t\t: %d\n",
-		(cpci690_get_bus_freq() + 500000) / 1000000);
-	seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
-	seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
-	seq_printf(m, "FPGA Revision\t: %d\n",
-		in_8(cpci690_br_base + CPCI690_BR_MEM_CTLR) >> 5);
-
-	switch(bh.type) {
-	case MV64x60_TYPE_GT64260A:
-		s = "gt64260a";
-		break;
-	case MV64x60_TYPE_GT64260B:
-		s = "gt64260b";
-		break;
-	case MV64x60_TYPE_MV64360:
-		s = "mv64360";
-		break;
-	case MV64x60_TYPE_MV64460:
-		s = "mv64460";
-		break;
-	default:
-		s = "Unknown";
-	}
-	seq_printf(m, "bridge type\t: %s\n", s);
-	seq_printf(m, "bridge rev\t: 0x%x\n", bh.rev);
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-	seq_printf(m, "coherency\t: %s\n", "off");
-#else
-	seq_printf(m, "coherency\t: %s\n", "on");
-#endif
-
-	return 0;
-}
-
-static void __init
-cpci690_calibrate_decr(void)
-{
-	ulong freq;
-
-	freq = cpci690_get_bus_freq() / 4;
-
-	printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       freq/1000000, freq%1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB_MPSC)
-static void __init
-cpci690_map_io(void)
-{
-	io_block_mapping(CONFIG_MV64X60_NEW_BASE, CONFIG_MV64X60_NEW_BASE,
-		128 * 1024, _PAGE_IO);
-}
-#endif
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	isa_mem_base = 0;
-
-	ppc_md.setup_arch = cpci690_setup_arch;
-	ppc_md.show_cpuinfo = cpci690_show_cpuinfo;
-	ppc_md.init_IRQ = gt64260_init_irq;
-	ppc_md.get_irq = gt64260_get_irq;
-	ppc_md.restart = cpci690_restart;
-	ppc_md.power_off = cpci690_power_off;
-	ppc_md.halt = cpci690_halt;
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-	ppc_md.calibrate_decr = cpci690_calibrate_decr;
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB_MPSC)
-	ppc_md.setup_io_mappings = cpci690_map_io;
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = mv64x60_mpsc_progress;
-	mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
-#endif	/* CONFIG_SERIAL_TEXT_DEBUG */
-#endif	/* defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB_MPSC) */
-
-#if defined(CONFIG_SERIAL_MPSC)
-	platform_notify = cpci690_platform_notify;
-#endif
-}
diff --git a/arch/ppc/platforms/cpci690.h b/arch/ppc/platforms/cpci690.h
deleted file mode 100644
index 0fa5a4c31b67..000000000000
--- a/arch/ppc/platforms/cpci690.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Definitions for Force CPCI690
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2003 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * The GT64260 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- */
-
-#ifndef __PPC_PLATFORMS_CPCI690_H
-#define __PPC_PLATFORMS_CPCI690_H
-
-/*
- * Define bd_t to pass in the MAC addresses used by the GT64260's enet ctlrs.
- */
-#define	CPCI690_BI_MAGIC		0xFE8765DC
-
-typedef struct board_info {
-	u32	bi_magic;
-	u8	bi_enetaddr[3][6];
-} bd_t;
-
-/* PCI bus Resource setup */
-#define CPCI690_PCI0_MEM_START_PROC_ADDR	0x80000000
-#define CPCI690_PCI0_MEM_START_PCI_HI_ADDR	0x00000000
-#define CPCI690_PCI0_MEM_START_PCI_LO_ADDR	0x80000000
-#define CPCI690_PCI0_MEM_SIZE			0x10000000
-#define CPCI690_PCI0_IO_START_PROC_ADDR		0xa0000000
-#define CPCI690_PCI0_IO_START_PCI_ADDR		0x00000000
-#define CPCI690_PCI0_IO_SIZE			0x01000000
-
-#define CPCI690_PCI1_MEM_START_PROC_ADDR	0x90000000
-#define CPCI690_PCI1_MEM_START_PCI_HI_ADDR	0x00000000
-#define CPCI690_PCI1_MEM_START_PCI_LO_ADDR	0x90000000
-#define CPCI690_PCI1_MEM_SIZE			0x10000000
-#define CPCI690_PCI1_IO_START_PROC_ADDR		0xa1000000
-#define CPCI690_PCI1_IO_START_PCI_ADDR		0x01000000
-#define CPCI690_PCI1_IO_SIZE			0x01000000
-
-/* Board Registers */
-#define	CPCI690_BR_BASE				0xf0000000
-#define	CPCI690_BR_SIZE_ACTUAL			0x8
-#define	CPCI690_BR_SIZE			max(GT64260_WINDOW_SIZE_MIN,	\
-						CPCI690_BR_SIZE_ACTUAL)
-#define	CPCI690_BR_LED_CNTL			0x00
-#define	CPCI690_BR_SW_RESET			0x01
-#define	CPCI690_BR_MISC_STATUS			0x02
-#define	CPCI690_BR_SWITCH_STATUS		0x03
-#define	CPCI690_BR_MEM_CTLR			0x04
-#define	CPCI690_BR_LAST_RESET_1			0x05
-#define	CPCI690_BR_LAST_RESET_2			0x06
-
-#define	CPCI690_TODC_BASE			0xf0100000
-#define	CPCI690_TODC_SIZE_ACTUAL		0x8000 /* Size or NVRAM + RTC */
-#define	CPCI690_TODC_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						CPCI690_TODC_SIZE_ACTUAL)
-#define	CPCI690_MAC_OFFSET			0x7c10 /* MAC in RTC NVRAM */
-
-#define	CPCI690_IPMI_BASE			0xf0200000
-#define	CPCI690_IPMI_SIZE_ACTUAL		0x10 /* 16 bytes of IPMI */
-#define	CPCI690_IPMI_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						CPCI690_IPMI_SIZE_ACTUAL)
-
-#define	CPCI690_MPSC_BAUD			9600
-#define	CPCI690_MPSC_CLK_SRC			8 /* TCLK */
-
-#endif /* __PPC_PLATFORMS_CPCI690_H */
diff --git a/arch/ppc/platforms/est8260.h b/arch/ppc/platforms/est8260.h
deleted file mode 100644
index adba68ecf57b..000000000000
--- a/arch/ppc/platforms/est8260.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* Board information for the EST8260, which should be generic for
- * all 8260 boards.  The IMMR is now given to us so the hard define
- * will soon be removed.  All of the clock values are computed from
- * the configuration SCMR and the Power-On-Reset word.
- */
-#ifndef __EST8260_PLATFORM
-#define __EST8260_PLATFORM
-
-#define CPM_MAP_ADDR		((uint)0xf0000000)
-
-#define BOOTROM_RESTART_ADDR	((uint)0xff000104)
-
-/* For our show_cpuinfo hooks. */
-#define CPUINFO_VENDOR		"EST Corporation"
-#define CPUINFO_MACHINE		"SBC8260 PowerPC"
-
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in MHz */
-	unsigned int	bi_cpmfreq;	/* CPM Freq, in MHz */
-	unsigned int	bi_brgfreq;	/* BRG Freq, in MHz */
-	unsigned int	bi_vco;		/* VCO Out from PLL */
-	unsigned int	bi_baudrate;	/* Default console baud rate */
-	unsigned int	bi_immr;	/* IMMR when called from boot rom */
-	unsigned char	bi_enetaddr[6];
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-#endif 	/* __EST8260_PLATFORM */
diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c
deleted file mode 100644
index f522b31c46d7..000000000000
--- a/arch/ppc/platforms/ev64260.c
+++ /dev/null
@@ -1,649 +0,0 @@
-/*
- * Board setup routines for the Marvell/Galileo EV-64260-BP Evaluation Board.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001-2003 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * The EV-64260-BP port is the result of hard work from many people from
- * many companies.  In particular, employees of Marvell/Galileo, Mission
- * Critical Linux, Xyterra, and MontaVista Software were heavily involved.
- *
- * Note: I have not been able to get *all* PCI slots to work reliably
- *	at 66 MHz.  I recommend setting jumpers J15 & J16 to short pins 1&2
- *	so that 33 MHz is used. --MAG
- * Note: The 750CXe and 7450 are not stable with a 125MHz or 133MHz TCLK/SYSCLK.
- * 	At 100MHz, they are solid.
- */
-
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/seq_file.h>
-#include <linux/console.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/platform_device.h>
-#if !defined(CONFIG_SERIAL_MPSC_CONSOLE)
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#else
-#include <linux/mv643xx.h>
-#endif
-#include <asm/bootinfo.h>
-#include <asm/machdep.h>
-#include <asm/mv64x60.h>
-#include <asm/todc.h>
-#include <asm/time.h>
-
-#include <platforms/ev64260.h>
-
-#define BOARD_VENDOR	"Marvell/Galileo"
-#define BOARD_MACHINE	"EV-64260-BP"
-
-static struct mv64x60_handle	bh;
-
-#if !defined(CONFIG_SERIAL_MPSC_CONSOLE)
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_init(int, struct uart_port *);
-#endif
-
-static const unsigned int cpu_7xx[16] = { /* 7xx & 74xx (but not 745x) */
-	18, 15, 14, 2, 4, 13, 5, 9, 6, 11, 8, 10, 16, 12, 7, 0
-};
-static const unsigned int cpu_745x[2][16] = { /* PLL_EXT 0 & 1 */
-	{ 1, 15, 14,  2,  4, 13,  5,  9,  6, 11,  8, 10, 16, 12,  7,  0 },
-	{ 0, 30,  0,  2,  0, 26,  0, 18,  0, 22, 20, 24, 28, 32,  0,  0 }
-};
-
-
-TODC_ALLOC();
-
-static int
-ev64260_get_bus_speed(void)
-{
-	return 100000000;
-}
-
-static int
-ev64260_get_cpu_speed(void)
-{
-	unsigned long	pvr, hid1, pll_ext;
-
-	pvr = PVR_VER(mfspr(SPRN_PVR));
-
-	if (pvr != PVR_VER(PVR_7450)) {
-		hid1 = mfspr(SPRN_HID1) >> 28;
-		return ev64260_get_bus_speed() * cpu_7xx[hid1]/2;
-	}
-	else {
-		hid1 = (mfspr(SPRN_HID1) & 0x0001e000) >> 13;
-		pll_ext = 0; /* No way to read; must get from schematic */
-		return ev64260_get_bus_speed() * cpu_745x[pll_ext][hid1]/2;
-	}
-}
-
-unsigned long __init
-ev64260_find_end_of_memory(void)
-{
-	return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
-		MV64x60_TYPE_GT64260A);
-}
-
-/*
- * Marvell/Galileo EV-64260-BP Evaluation Board PCI interrupt routing.
- * Note: By playing with J8 and JP1-4, you can get 2 IRQ's from the first
- *	PCI bus (in which cast, INTPIN B would be EV64260_PCI_1_IRQ).
- *	This is the most IRQs you can get from one bus with this board, though.
- */
-static int __init
-ev64260_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller	*hose = pci_bus_to_hose(dev->bus->number);
-
-	if (hose->index == 0) {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 * 	   A   B   C   D
-		 */
-		{
-			{EV64260_PCI_0_IRQ,0,0,0}, /* IDSEL 7 - PCI bus 0 */
-			{EV64260_PCI_0_IRQ,0,0,0}, /* IDSEL 8 - PCI bus 0 */
-		};
-
-		const long min_idsel = 7, max_idsel = 8, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-	else {
-		static char pci_irq_table[][4] =
-		/*
-		 *	PCI IDSEL/INTPIN->INTLINE
-		 * 	   A   B   C   D
-		 */
-		{
-			{ EV64260_PCI_1_IRQ,0,0,0}, /* IDSEL 7 - PCI bus 1 */
-			{ EV64260_PCI_1_IRQ,0,0,0}, /* IDSEL 8 - PCI bus 1 */
-		};
-
-		const long min_idsel = 7, max_idsel = 8, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-}
-
-static void __init
-ev64260_setup_peripherals(void)
-{
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-		EV64260_EMB_FLASH_BASE, EV64260_EMB_FLASH_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
-		EV64260_EXT_SRAM_BASE, EV64260_EXT_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
-		EV64260_TODC_BASE, EV64260_TODC_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
-		EV64260_UART_BASE, EV64260_UART_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
-		EV64260_EXT_FLASH_BASE, EV64260_EXT_FLASH_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-
-	TODC_INIT(TODC_TYPE_DS1501, 0, 0,
-			ioremap(EV64260_TODC_BASE, EV64260_TODC_SIZE), 8);
-
-	mv64x60_clr_bits(&bh, MV64x60_CPU_CONFIG,((1<<12) | (1<<28) | (1<<29)));
-	mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1<<27));
-
-	if (ev64260_get_bus_speed() > 100000000)
-		mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1<<23));
-
-	mv64x60_set_bits(&bh, MV64x60_PCI0_PCI_DECODE_CNTL, ((1<<0) | (1<<3)));
-	mv64x60_set_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, ((1<<0) | (1<<3)));
-
-        /*
-         * Enabling of PCI internal-vs-external arbitration
-         * is a platform- and errata-dependent decision.
-         */
-        if (bh.type == MV64x60_TYPE_GT64260A )  {
-                mv64x60_set_bits(&bh, MV64x60_PCI0_ARBITER_CNTL, (1<<31));
-                mv64x60_set_bits(&bh, MV64x60_PCI1_ARBITER_CNTL, (1<<31));
-        }
-
-        mv64x60_set_bits(&bh, MV64x60_CPU_MASTER_CNTL, (1<<9)); /* Only 1 cpu */
-
-	/*
-	 * Turn off timer/counters.  Not turning off watchdog timer because
-	 * can't read its reg on the 64260A so don't know if we'll be enabling
-	 * or disabling.
-	 */
-	mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
-			((1<<0) | (1<<8) | (1<<16) | (1<<24)));
-	mv64x60_clr_bits(&bh, GT64260_TIMR_CNTR_4_7_CNTL,
-			((1<<0) | (1<<8) | (1<<16) | (1<<24)));
-
-	/*
-	 * Set MPSC Multiplex RMII
-	 * NOTE: ethernet driver modifies bit 0 and 1
-	 */
-	mv64x60_write(&bh, GT64260_MPP_SERIAL_PORTS_MULTIPLEX, 0x00001102);
-
-	/*
-	 * The EV-64260-BP uses several Multi-Purpose Pins (MPP) on the 64260
-	 * bridge as interrupt inputs (via the General Purpose Ports (GPP)
-	 * register).  Need to route the MPP inputs to the GPP and set the
-	 * polarity correctly.
-	 *
-	 * In MPP Control 2 Register
-	 *   MPP 21 -> GPP 21 (DUART channel A intr) bits 20-23 -> 0
-	 *   MPP 22 -> GPP 22 (DUART channel B intr) bits 24-27 -> 0
-	 */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_2, (0xf<<20) | (0xf<<24) );
-
-	/*
-	 * In MPP Control 3 Register
-	 *   MPP 26 -> GPP 26 (RTC INT)		bits  8-11 -> 0
-	 *   MPP 27 -> GPP 27 (PCI 0 INTA)	bits 12-15 -> 0
-	 *   MPP 29 -> GPP 29 (PCI 1 INTA)	bits 20-23 -> 0
-	 */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_3, (0xf<<8)|(0xf<<12)|(0xf<<20));
-
-#define GPP_EXTERNAL_INTERRUPTS \
-		((1<<21) | (1<<22) | (1<<26) | (1<<27) | (1<<29))
-	/* DUART & PCI interrupts are inputs */
-	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, GPP_EXTERNAL_INTERRUPTS);
-	/* DUART & PCI interrupts are active low */
-	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, GPP_EXTERNAL_INTERRUPTS);
-
-	/* Clear any pending interrupts for these inputs and enable them. */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~GPP_EXTERNAL_INTERRUPTS);
-	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, GPP_EXTERNAL_INTERRUPTS);
-
-	return;
-}
-
-static void __init
-ev64260_setup_bridge(void)
-{
-	struct mv64x60_setup_info	si;
-	int				i;
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	si.pci_0.enable_bus = 1;
-	si.pci_0.pci_io.cpu_base = EV64260_PCI0_IO_CPU_BASE;
-	si.pci_0.pci_io.pci_base_hi = 0;
-	si.pci_0.pci_io.pci_base_lo = EV64260_PCI0_IO_PCI_BASE;
-	si.pci_0.pci_io.size = EV64260_PCI0_IO_SIZE;
-	si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_mem[0].cpu_base = EV64260_PCI0_MEM_CPU_BASE;
-	si.pci_0.pci_mem[0].pci_base_hi = 0;
-	si.pci_0.pci_mem[0].pci_base_lo = EV64260_PCI0_MEM_PCI_BASE;
-	si.pci_0.pci_mem[0].size = EV64260_PCI0_MEM_SIZE;
-	si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_cmd_bits = 0;
-	si.pci_0.latency_timer = 0x8;
-
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = EV64260_PCI1_IO_CPU_BASE;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = EV64260_PCI1_IO_PCI_BASE;
-	si.pci_1.pci_io.size = EV64260_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = EV64260_PCI1_MEM_CPU_BASE;
-	si.pci_1.pci_mem[0].pci_base_hi = 0;
-	si.pci_1.pci_mem[0].pci_base_lo = EV64260_PCI1_MEM_PCI_BASE;
-	si.pci_1.pci_mem[0].size = EV64260_PCI1_MEM_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x8;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++) {
-		si.cpu_prot_options[i] = 0;
-		si.cpu_snoop_options[i] = GT64260_CPU_SNOOP_WB;
-		si.pci_0.acc_cntl_options[i] =
-			GT64260_PCI_ACC_CNTL_DREADEN |
-			GT64260_PCI_ACC_CNTL_RDPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
-			GT64260_PCI_ACC_CNTL_SWAP_NONE |
-			GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
-		si.pci_0.snoop_options[i] = GT64260_PCI_SNOOP_WB;
-		si.pci_1.acc_cntl_options[i] =
-			GT64260_PCI_ACC_CNTL_DREADEN |
-			GT64260_PCI_ACC_CNTL_RDPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDLINEPREFETCH |
-			GT64260_PCI_ACC_CNTL_RDMULPREFETCH |
-			GT64260_PCI_ACC_CNTL_SWAP_NONE |
-			GT64260_PCI_ACC_CNTL_MBURST_32_BTYES;
-		si.pci_1.snoop_options[i] = GT64260_PCI_SNOOP_WB;
-	}
-
-        /* Lookup PCI host bridges */
-        if (mv64x60_init(&bh, &si))
-                printk(KERN_ERR "Bridge initialization failed.\n");
-
-	pci_dram_offset = 0; /* System mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ev64260_map_irq;
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
-
-	bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
-	mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
-	bh.hose_b->last_busno = 0xff;
-	bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
-		bh.hose_b->first_busno);
-
-	return;
-}
-
-#if defined(CONFIG_SERIAL_8250) && !defined(CONFIG_SERIAL_MPSC_CONSOLE)
-static void __init
-ev64260_early_serial_map(void)
-{
-	struct uart_port	port;
-	static char		first_time = 1;
-
-	if (first_time) {
-		memset(&port, 0, sizeof(port));
-
-		port.membase = ioremap(EV64260_SERIAL_0, EV64260_UART_SIZE);
-		port.irq = EV64260_UART_0_IRQ;
-		port.uartclk = BASE_BAUD * 16;
-		port.regshift = 2;
-		port.iotype = UPIO_MEM;
-		port.flags = STD_COM_FLAGS;
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-		gen550_init(0, &port);
-#endif
-
-		if (early_serial_setup(&port) != 0)
-			printk(KERN_WARNING "Early serial init of port 0 "
-				"failed\n");
-
-		first_time = 0;
-	}
-
-	return;
-}
-#elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
-static void __init
-ev64260_early_serial_map(void)
-{
-}
-#endif
-
-static void __init
-ev64260_setup_arch(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("ev64260_setup_arch: enter", 0);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	if (ppc_md.progress)
-		ppc_md.progress("ev64260_setup_arch: Enabling L2 cache", 0);
-
-	/* Enable L2 and L3 caches (if 745x) */
-	_set_L2CR(_get_L2CR() | L2CR_L2E);
-	_set_L3CR(_get_L3CR() | L3CR_L3E);
-
-	if (ppc_md.progress)
-		ppc_md.progress("ev64260_setup_arch: Initializing bridge", 0);
-
-	ev64260_setup_bridge();		/* set up PCI bridge(s) */
-	ev64260_setup_peripherals();	/* set up chip selects/GPP/MPP etc */
-
-	if (ppc_md.progress)
-		ppc_md.progress("ev64260_setup_arch: bridge init complete", 0);
-
-#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	ev64260_early_serial_map();
-#endif
-
-	printk(KERN_INFO "%s %s port (C) 2001 MontaVista Software, Inc. "
-		"(source@mvista.com)\n", BOARD_VENDOR, BOARD_MACHINE);
-
-	if (ppc_md.progress)
-		ppc_md.progress("ev64260_setup_arch: exit", 0);
-
-	return;
-}
-
-/* Platform device data fixup routines. */
-#if defined(CONFIG_SERIAL_MPSC)
-static void __init
-ev64260_fixup_mpsc_pdata(struct platform_device *pdev)
-{
-	struct mpsc_pdata *pdata;
-
-	pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
-
-	pdata->max_idle = 40;
-	pdata->default_baud = EV64260_DEFAULT_BAUD;
-	pdata->brg_clk_src = EV64260_MPSC_CLK_SRC;
-	pdata->brg_clk_freq = EV64260_MPSC_CLK_FREQ;
-
-	return;
-}
-
-static int
-ev64260_platform_notify(struct device *dev)
-{
-	static struct {
-		char	*bus_id;
-		void	((*rtn)(struct platform_device *pdev));
-	} dev_map[] = {
-		{ MPSC_CTLR_NAME ".0", ev64260_fixup_mpsc_pdata },
-		{ MPSC_CTLR_NAME ".1", ev64260_fixup_mpsc_pdata },
-	};
-	struct platform_device	*pdev;
-	int	i;
-
-	if (dev && dev->bus_id)
-		for (i=0; i<ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-				BUS_ID_SIZE)) {
-
-				pdev = container_of(dev,
-					struct platform_device, dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-#endif
-
-static void
-ev64260_reset_board(void *addr)
-{
-	local_irq_disable();
-
-	/* disable and invalidate the L2 cache */
-	_set_L2CR(0);
-	_set_L2CR(0x200000);
-
-	/* flush and disable L1 I/D cache */
-	__asm__ __volatile__
-	("mfspr   3,1008\n\t"
-	 "ori	5,5,0xcc00\n\t"
-	 "ori	4,3,0xc00\n\t"
-	 "andc	5,3,5\n\t"
-	 "sync\n\t"
-	 "mtspr	1008,4\n\t"
-	 "isync\n\t"
-	 "sync\n\t"
-	 "mtspr	1008,5\n\t"
-	 "isync\n\t"
-	 "sync\n\t");
-
-	/* unmap any other random cs's that might overlap with bootcs */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, 0, 0, 0);
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, 0, 0, 0);
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN, 0, 0, 0);
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN, 0, 0, 0);
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-
-	/* map bootrom back in to gt @ reset defaults */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-						0xff800000, 8*1024*1024, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	/* move reg base back to default, setup default pci0 */
-	mv64x60_write(&bh, MV64x60_INTERNAL_SPACE_DECODE,
-		(1<<24) | CONFIG_MV64X60_BASE >> 20);
-
-	/* NOTE: FROM NOW ON no more GT_REGS accesses.. 0x1 is not mapped
-	 * via BAT or MMU, and MSR IR/DR is ON */
-	/* SRR0 has system reset vector, SRR1 has default MSR value */
-	/* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
-	/* NOTE: assumes reset vector is at 0xfff00100 */
-	__asm__ __volatile__
-	("mtspr   26, %0\n\t"
-	 "li      4,(1<<6)\n\t"
-	 "mtspr   27,4\n\t"
-	 "rfi\n\t"
-	 :: "r" (addr):"r4");
-
-	return;
-}
-
-static void
-ev64260_restart(char *cmd)
-{
-	volatile ulong	i = 10000000;
-
-	ev64260_reset_board((void *)0xfff00100);
-
-	while (i-- > 0);
-	panic("restart failed\n");
-}
-
-static void
-ev64260_halt(void)
-{
-	local_irq_disable();
-	while (1);
-	/* NOTREACHED */
-}
-
-static void
-ev64260_power_off(void)
-{
-	ev64260_halt();
-	/* NOTREACHED */
-}
-
-static int
-ev64260_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid;
-
-	pvid = mfspr(SPRN_PVR);
-	seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
-	seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
-	seq_printf(m, "cpu MHz\t\t: %d\n", ev64260_get_cpu_speed()/1000/1000);
-	seq_printf(m, "bus MHz\t\t: %d\n", ev64260_get_bus_speed()/1000/1000);
-
-	return 0;
-}
-
-/* DS1501 RTC has too much variation to use RTC for calibration */
-static void __init
-ev64260_calibrate_decr(void)
-{
-	ulong freq;
-
-	freq = ev64260_get_bus_speed()/4;
-
-	printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       freq/1000000, freq%1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	return;
-}
-
-/*
- * Set BAT 3 to map 0xfb000000 to 0xfc000000 of physical memory space.
- */
-static __inline__ void
-ev64260_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xfb0001fe);
-	mtspr(SPRN_DBAT1L, 0xfb00002a);
-	mb();
-
-	return;
-}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-static void __init
-ev64260_map_io(void)
-{
-	io_block_mapping(0xfb000000, 0xfb000000, 0x01000000, _PAGE_IO);
-}
-#endif
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-#ifdef CONFIG_BLK_DEV_INITRD
-	extern int	initrd_below_start_ok;
-
-	initrd_start=initrd_end=0;
-	initrd_below_start_ok=0;
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	parse_bootinfo(find_bootinfo());
-
-	isa_mem_base = 0;
-	isa_io_base = EV64260_PCI0_IO_CPU_BASE;
-	pci_dram_offset = EV64260_PCI0_MEM_CPU_BASE;
-
-	loops_per_jiffy = ev64260_get_cpu_speed() / HZ;
-
-	ppc_md.setup_arch = ev64260_setup_arch;
-	ppc_md.show_cpuinfo = ev64260_show_cpuinfo;
-	ppc_md.init_IRQ = gt64260_init_irq;
-	ppc_md.get_irq = gt64260_get_irq;
-
-	ppc_md.restart = ev64260_restart;
-	ppc_md.power_off = ev64260_power_off;
-	ppc_md.halt = ev64260_halt;
-
-	ppc_md.find_end_of_memory = ev64260_find_end_of_memory;
-
-	ppc_md.init = NULL;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-	ppc_md.calibrate_decr = ev64260_calibrate_decr;
-
-	bh.p_base = CONFIG_MV64X60_NEW_BASE;
-
-	ev64260_set_bat();
-
-#ifdef	CONFIG_SERIAL_8250
-#if defined(CONFIG_SERIAL_TEXT_DEBUG)
-	ppc_md.setup_io_mappings = ev64260_map_io;
-	ppc_md.progress = gen550_progress;
-#endif
-#if defined(CONFIG_KGDB)
-	ppc_md.setup_io_mappings = ev64260_map_io;
-	ppc_md.early_serial_map = ev64260_early_serial_map;
-#endif
-#elif defined(CONFIG_SERIAL_MPSC_CONSOLE)
-#ifdef	CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.setup_io_mappings = ev64260_map_io;
-	ppc_md.progress = mv64x60_mpsc_progress;
-	mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
-#endif	/* CONFIG_SERIAL_TEXT_DEBUG */
-#ifdef	CONFIG_KGDB
-	ppc_md.setup_io_mappings = ev64260_map_io;
-	ppc_md.early_serial_map = ev64260_early_serial_map;
-#endif	/* CONFIG_KGDB */
-
-#endif
-
-#if defined(CONFIG_SERIAL_MPSC)
-	platform_notify = ev64260_platform_notify;
-#endif
-
-	return;
-}
diff --git a/arch/ppc/platforms/ev64260.h b/arch/ppc/platforms/ev64260.h
deleted file mode 100644
index 44d90d56745a..000000000000
--- a/arch/ppc/platforms/ev64260.h
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * Definitions for Marvell/Galileo EV-64260-BP Evaluation Board.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * The MV64x60 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- * We'll only use one PCI MEM window on each PCI bus.
- *
- * This is the CPU physical memory map (windows must be at least 1MB and start
- * on a boundary that is a multiple of the window size):
- *
- * 	0xfc000000-0xffffffff		- External FLASH on device module
- * 	0xfbf00000-0xfbffffff		- Embedded (on board) FLASH
- * 	0xfbe00000-0xfbefffff		- GT64260 Registers (preferably)
- * 					  but really a config option
- * 	0xfbd00000-0xfbdfffff		- External SRAM on device module
- * 	0xfbc00000-0xfbcfffff		- TODC chip on device module
- * 	0xfbb00000-0xfbbfffff		- External UART on device module
- * 	0xa2000000-0xfbafffff		- <hole>
- * 	0xa1000000-0xa1ffffff		- PCI 1 I/O (defined in gt64260.h)
- * 	0xa0000000-0xa0ffffff		- PCI 0 I/O (defined in gt64260.h)
- * 	0x90000000-0x9fffffff		- PCI 1 MEM (defined in gt64260.h)
- * 	0x80000000-0x8fffffff		- PCI 0 MEM (defined in gt64260.h)
- */
-
-#ifndef __PPC_PLATFORMS_EV64260_H
-#define __PPC_PLATFORMS_EV64260_H
-
-/* PCI mappings */
-#define	EV64260_PCI0_IO_CPU_BASE	0xa0000000
-#define	EV64260_PCI0_IO_PCI_BASE	0x00000000
-#define	EV64260_PCI0_IO_SIZE		0x01000000
-
-#define	EV64260_PCI0_MEM_CPU_BASE	0x80000000
-#define	EV64260_PCI0_MEM_PCI_BASE	0x80000000
-#define	EV64260_PCI0_MEM_SIZE		0x10000000
-
-#define	EV64260_PCI1_IO_CPU_BASE	(EV64260_PCI0_IO_CPU_BASE + \
-						EV64260_PCI0_IO_SIZE)
-#define	EV64260_PCI1_IO_PCI_BASE	(EV64260_PCI0_IO_PCI_BASE + \
-						EV64260_PCI0_IO_SIZE)
-#define	EV64260_PCI1_IO_SIZE		0x01000000
-
-#define	EV64260_PCI1_MEM_CPU_BASE	(EV64260_PCI0_MEM_CPU_BASE + \
-						EV64260_PCI0_MEM_SIZE)
-#define	EV64260_PCI1_MEM_PCI_BASE	(EV64260_PCI0_MEM_PCI_BASE + \
-						EV64260_PCI0_MEM_SIZE)
-#define	EV64260_PCI1_MEM_SIZE		0x10000000
-
-/* CPU Physical Memory Map setup (other than PCI) */
-#define	EV64260_EXT_FLASH_BASE		0xfc000000
-#define	EV64260_EMB_FLASH_BASE		0xfbf00000
-#define	EV64260_EXT_SRAM_BASE		0xfbd00000
-#define	EV64260_TODC_BASE		0xfbc00000
-#define	EV64260_UART_BASE		0xfbb00000
-
-#define	EV64260_EXT_FLASH_SIZE_ACTUAL	0x04000000  /* <= 64MB Extern FLASH */
-#define	EV64260_EMB_FLASH_SIZE_ACTUAL	0x00080000  /* 512KB of Embed FLASH */
-#define	EV64260_EXT_SRAM_SIZE_ACTUAL	0x00100000  /* 1MB SDRAM */
-#define	EV64260_TODC_SIZE_ACTUAL	0x00000020  /* 32 bytes for TODC */
-#define	EV64260_UART_SIZE_ACTUAL	0x00000040  /* 64 bytes for DUART */
-
-#define	EV64260_EXT_FLASH_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						EV64260_EXT_FLASH_SIZE_ACTUAL)
-#define	EV64260_EMB_FLASH_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						EV64260_EMB_FLASH_SIZE_ACTUAL)
-#define	EV64260_EXT_SRAM_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						EV64260_EXT_SRAM_SIZE_ACTUAL)
-#define	EV64260_TODC_SIZE		max(GT64260_WINDOW_SIZE_MIN,	\
-						EV64260_TODC_SIZE_ACTUAL)
-/* Assembler in bootwrapper blows up if 'max' is used */
-#define	EV64260_UART_SIZE		GT64260_WINDOW_SIZE_MIN
-#define	EV64260_UART_END		((EV64260_UART_BASE +		\
-					EV64260_UART_SIZE - 1) & 0xfff00000)
-
-/* Board-specific IRQ info */
-#define	EV64260_UART_0_IRQ		85
-#define	EV64260_UART_1_IRQ		86
-#define	EV64260_PCI_0_IRQ		91
-#define	EV64260_PCI_1_IRQ		93
-
-/* Serial port setup */
-#define	EV64260_DEFAULT_BAUD		115200
-
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-#define SERIAL_PORT_DFNS
-
-#define	EV64260_MPSC_CLK_SRC		8		/* TCLK */
-#define	EV64260_MPSC_CLK_FREQ		100000000	/* 100MHz clk */
-#else
-#define EV64260_SERIAL_0		(EV64260_UART_BASE + 0x20)
-#define EV64260_SERIAL_1		EV64260_UART_BASE
-
-#define BASE_BAUD	(EV64260_DEFAULT_BAUD * 2)
-
-#ifdef CONFIG_SERIAL_MANY_PORTS
-#define RS_TABLE_SIZE	64
-#else
-#define RS_TABLE_SIZE	2
-#endif
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
-#endif
-
-/* Required for bootloader's ns16550.c code */
-#define STD_SERIAL_PORT_DFNS 						\
-        { 0, BASE_BAUD, EV64260_SERIAL_0, EV64260_UART_0_IRQ, STD_COM_FLAGS, \
-	iomem_base: (u8 *)EV64260_SERIAL_0,	/* ttyS0 */		\
-	iomem_reg_shift: 2,						\
-	io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-#endif
-#endif /* __PPC_PLATFORMS_EV64260_H */
diff --git a/arch/ppc/platforms/ev64360.c b/arch/ppc/platforms/ev64360.c
deleted file mode 100644
index 6765676a5c6b..000000000000
--- a/arch/ppc/platforms/ev64360.c
+++ /dev/null
@@ -1,517 +0,0 @@
-/*
- * Board setup routines for the Marvell EV-64360-BP Evaluation Board.
- *
- * Author: Lee Nicks <allinux@gmail.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by - Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/console.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/bootmem.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/smp.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppcboot.h>
-#include <asm/mv64x60.h>
-#include <asm/machdep.h>
-#include <platforms/ev64360.h>
-
-#define BOARD_VENDOR    "Marvell"
-#define BOARD_MACHINE   "EV-64360-BP"
-
-static struct		mv64x60_handle bh;
-static void __iomem	*sram_base;
-
-static u32		ev64360_flash_size_0;
-static u32		ev64360_flash_size_1;
-
-static u32		ev64360_bus_frequency;
-
-unsigned char	__res[sizeof(bd_t)];
-
-TODC_ALLOC();
-
-static int __init
-ev64360_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	return 0;
-}
-
-static void __init
-ev64360_setup_bridge(void)
-{
-	struct mv64x60_setup_info si;
-	int i;
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	#ifdef CONFIG_PCI
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = EV64360_PCI1_IO_START_PROC_ADDR;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = EV64360_PCI1_IO_START_PCI_ADDR;
-	si.pci_1.pci_io.size = EV64360_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = EV64360_PCI1_MEM_START_PROC_ADDR;
-	si.pci_1.pci_mem[0].pci_base_hi = EV64360_PCI1_MEM_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[0].pci_base_lo = EV64360_PCI1_MEM_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[0].size = EV64360_PCI1_MEM_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x80;
-	#else
-	si.pci_0.enable_bus = 0;
-	si.pci_1.enable_bus = 0;
-	#endif
-
-	for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) {
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-#else
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
-#endif
-	}
-
-	if (mv64x60_init(&bh, &si))
-		printk(KERN_WARNING "Bridge initialization failed.\n");
-
-	#ifdef CONFIG_PCI
-	pci_dram_offset = 0; /* sys mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ev64360_map_irq;
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 1, 0);
-	bh.hose_b->first_busno = 0;
-	bh.hose_b->last_busno = 0xff;
-	#endif
-}
-
-/* Bridge & platform setup routines */
-void __init
-ev64360_intr_setup(void)
-{
-	/* MPP 8, 9, and 10 */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0xfff);
-
-	/*
-	 * Define GPP 8,9,and 10 interrupt polarity as active low
-	 * input signal and level triggered
-	 */
-	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, 0x700);
-	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, 0x700);
-
-	/* Config GPP intr ctlr to respond to level trigger */
-	mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10));
-
-	/* Erranum FEr PCI-#8 */
-	mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1<<5) | (1<<9));
-	mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<5) | (1<<9));
-
-	/*
-	 * Dismiss and then enable interrupt on GPP interrupt cause
-	 * for CPU #0
-	 */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~0x700);
-	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, 0x700);
-
-	/*
-	 * Dismiss and then enable interrupt on CPU #0 high cause reg
-	 * BIT25 summarizes GPP interrupts 8-15
-	 */
-	mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, (1<<25));
-}
-
-void __init
-ev64360_setup_peripherals(void)
-{
-	u32 base;
-
-	/* Set up window for boot CS */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-		 EV64360_BOOT_WINDOW_BASE, EV64360_BOOT_WINDOW_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	/* We only use the 32-bit flash */
-	mv64x60_get_32bit_window(&bh, MV64x60_CPU2BOOT_WIN, &base,
-		&ev64360_flash_size_0);
-	ev64360_flash_size_1 = 0;
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
-		 EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-
-	TODC_INIT(TODC_TYPE_DS1501, 0, 0,
-		ioremap(EV64360_RTC_WINDOW_BASE, EV64360_RTC_WINDOW_SIZE), 8);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-		 EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-	sram_base = ioremap(EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE);
-
-	/* Set up Enet->SRAM window */
-	mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN,
-		EV64360_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0x2);
-	bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN);
-
-	/* Give enet r/w access to memory region */
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_0, (0x3 << (4 << 1)));
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_1, (0x3 << (4 << 1)));
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_2, (0x3 << (4 << 1)));
-
-	mv64x60_clr_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, (1 << 3));
-	mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
-			 ((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24)));
-
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x00160000);
-#else
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
-#endif
-
-	/*
-	 * Setting the SRAM to 0. Note that this generates parity errors on
-	 * internal data path in SRAM since it's first time accessing it
-	 * while after reset it's not configured.
-	 */
-	memset(sram_base, 0, MV64360_SRAM_SIZE);
-
-	/* set up PCI interrupt controller */
-	ev64360_intr_setup();
-}
-
-static void __init
-ev64360_setup_arch(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("ev64360_setup_arch: enter", 0);
-
-	set_tb(0, 0);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef   CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	/*
-	 * Set up the L2CR register.
-	 */
-	_set_L2CR(L2CR_L2E | L2CR_L2PE);
-
-	if (ppc_md.progress)
-		ppc_md.progress("ev64360_setup_arch: calling setup_bridge", 0);
-
-	ev64360_setup_bridge();
-	ev64360_setup_peripherals();
-	ev64360_bus_frequency = ev64360_bus_freq();
-
-	printk(KERN_INFO "%s %s port (C) 2005 Lee Nicks "
-		"(allinux@gmail.com)\n", BOARD_VENDOR, BOARD_MACHINE);
-	if (ppc_md.progress)
-		ppc_md.progress("ev64360_setup_arch: exit", 0);
-}
-
-/* Platform device data fixup routines. */
-#if defined(CONFIG_SERIAL_MPSC)
-static void __init
-ev64360_fixup_mpsc_pdata(struct platform_device *pdev)
-{
-	struct mpsc_pdata *pdata;
-
-	pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
-
-	pdata->max_idle = 40;
-	pdata->default_baud = EV64360_DEFAULT_BAUD;
-	pdata->brg_clk_src = EV64360_MPSC_CLK_SRC;
-	/*
-	 * TCLK (not SysCLk) is routed to BRG, then to the MPSC.  On most parts,
-	 * TCLK == SysCLK but on 64460, they are separate pins.
-	 * SysCLK can go up to 200 MHz but TCLK can only go up to 133 MHz.
-	 */
-	pdata->brg_clk_freq = min(ev64360_bus_frequency, MV64x60_TCLK_FREQ_MAX);
-}
-#endif
-
-#if defined(CONFIG_MV643XX_ETH)
-static void __init
-ev64360_fixup_eth_pdata(struct platform_device *pdev)
-{
-	struct mv643xx_eth_platform_data *eth_pd;
-	static u16 phy_addr[] = {
-		EV64360_ETH0_PHY_ADDR,
-		EV64360_ETH1_PHY_ADDR,
-		EV64360_ETH2_PHY_ADDR,
-	};
-
-	eth_pd = pdev->dev.platform_data;
-	eth_pd->force_phy_addr = 1;
-	eth_pd->phy_addr = phy_addr[pdev->id];
-	eth_pd->tx_queue_size = EV64360_ETH_TX_QUEUE_SIZE;
-	eth_pd->rx_queue_size = EV64360_ETH_RX_QUEUE_SIZE;
-}
-#endif
-
-static int
-ev64360_platform_notify(struct device *dev)
-{
-	static struct {
-		char	*bus_id;
-		void	((*rtn)(struct platform_device *pdev));
-	} dev_map[] = {
-#if defined(CONFIG_SERIAL_MPSC)
-		{ MPSC_CTLR_NAME ".0", ev64360_fixup_mpsc_pdata },
-		{ MPSC_CTLR_NAME ".1", ev64360_fixup_mpsc_pdata },
-#endif
-#if defined(CONFIG_MV643XX_ETH)
-		{ MV643XX_ETH_NAME ".0", ev64360_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".1", ev64360_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".2", ev64360_fixup_eth_pdata },
-#endif
-	};
-	struct platform_device	*pdev;
-	int	i;
-
-	if (dev && dev->bus_id)
-		for (i=0; i<ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-				BUS_ID_SIZE)) {
-
-				pdev = container_of(dev,
-					struct platform_device, dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-
-#ifdef CONFIG_MTD_PHYSMAP
-
-#ifndef MB
-#define MB	(1 << 20)
-#endif
-
-/*
- * MTD Layout.
- *
- * FLASH Amount:	0xff000000 - 0xffffffff
- * -------------	-----------------------
- * Reserved:		0xff000000 - 0xff03ffff
- * JFFS2 file system:	0xff040000 - 0xffefffff
- * U-boot:		0xfff00000 - 0xffffffff
- */
-static int __init
-ev64360_setup_mtd(void)
-{
-	u32	size;
-	int	ptbl_entries;
-	static struct mtd_partition	*ptbl;
-
-	size = ev64360_flash_size_0 + ev64360_flash_size_1;
-	if (!size)
-		return -ENOMEM;
-
-	ptbl_entries = 3;
-
-	if ((ptbl = kzalloc(ptbl_entries * sizeof(struct mtd_partition),
-		GFP_KERNEL)) == NULL) {
-
-		printk(KERN_WARNING "Can't alloc MTD partition table\n");
-		return -ENOMEM;
-	}
-
-	ptbl[0].name = "reserved";
-	ptbl[0].offset = 0;
-	ptbl[0].size = EV64360_MTD_RESERVED_SIZE;
-	ptbl[1].name = "jffs2";
-	ptbl[1].offset = EV64360_MTD_RESERVED_SIZE;
-	ptbl[1].size = EV64360_MTD_JFFS2_SIZE;
-	ptbl[2].name = "U-BOOT";
-	ptbl[2].offset = EV64360_MTD_RESERVED_SIZE + EV64360_MTD_JFFS2_SIZE;
-	ptbl[2].size = EV64360_MTD_UBOOT_SIZE;
-
-	physmap_map.size = size;
-	physmap_set_partitions(ptbl, ptbl_entries);
-	return 0;
-}
-
-arch_initcall(ev64360_setup_mtd);
-#endif
-
-static void
-ev64360_restart(char *cmd)
-{
-	ulong	i = 0xffffffff;
-	volatile unsigned char * rtc_base = ioremap(EV64360_RTC_WINDOW_BASE,0x4000);
-
-	/* issue hard reset */
-	rtc_base[0xf] = 0x80;
-	rtc_base[0xc] = 0x00;
-	rtc_base[0xd] = 0x01;
-	rtc_base[0xf] = 0x83;
-
-	while (i-- > 0) ;
-	panic("restart failed\n");
-}
-
-static void
-ev64360_halt(void)
-{
-	while (1) ;
-	/* NOTREACHED */
-}
-
-static void
-ev64360_power_off(void)
-{
-	ev64360_halt();
-	/* NOTREACHED */
-}
-
-static int
-ev64360_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: " BOARD_VENDOR "\n");
-	seq_printf(m, "machine\t\t: " BOARD_MACHINE "\n");
-	seq_printf(m, "bus speed\t: %dMHz\n", ev64360_bus_frequency/1000/1000);
-
-	return 0;
-}
-
-static void __init
-ev64360_calibrate_decr(void)
-{
-	u32 freq;
-
-	freq = ev64360_bus_frequency / 4;
-
-	printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       (long)freq / 1000000, (long)freq % 1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
-
-unsigned long __init
-ev64360_find_end_of_memory(void)
-{
-	return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
-		MV64x60_TYPE_MV64360);
-}
-
-static inline void
-ev64360_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT2U, 0xf0001ffe);
-	mtspr(SPRN_DBAT2L, 0xf000002a);
-	mb();
-}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
-static void __init
-ev64360_map_io(void)
-{
-	io_block_mapping(CONFIG_MV64X60_NEW_BASE, \
-			 CONFIG_MV64X60_NEW_BASE, \
-			 0x00020000, _PAGE_IO);
-}
-#endif
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* ASSUMPTION:  If both r3 (bd_t pointer) and r6 (cmdline pointer)
-	 * are non-zero, then we should use the board info from the bd_t
-	 * structure and the cmdline pointed to by r6 instead of the
-	 * information from birecs, if any.  Otherwise, use the information
-	 * from birecs as discovered by the preceding call to
-	 * parse_bootinfo().  This rule should work with both PPCBoot, which
-	 * uses a bd_t board info structure, and the kernel boot wrapper,
-	 * which uses birecs.
-	 */
-	if (r3 && r6) {
-		/* copy board info structure */
-		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
-		/* copy command line */
-		*(char *)(r7+KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6+KERNELBASE));
-	}
-	#ifdef CONFIG_ISA
-	isa_mem_base = 0;
-	#endif
-
-	ppc_md.setup_arch = ev64360_setup_arch;
-	ppc_md.show_cpuinfo = ev64360_show_cpuinfo;
-	ppc_md.init_IRQ = mv64360_init_irq;
-	ppc_md.get_irq = mv64360_get_irq;
-	ppc_md.restart = ev64360_restart;
-	ppc_md.power_off = ev64360_power_off;
-	ppc_md.halt = ev64360_halt;
-	ppc_md.find_end_of_memory = ev64360_find_end_of_memory;
-	ppc_md.init = NULL;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-	ppc_md.calibrate_decr = ev64360_calibrate_decr;
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	ppc_md.setup_io_mappings = ev64360_map_io;
-	ppc_md.progress = mv64x60_mpsc_progress;
-	mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
-#endif
-
-#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH)
-	platform_notify = ev64360_platform_notify;
-#endif
-
-	ev64360_set_bat(); /* Need for ev64360_find_end_of_memory and progress */
-}
diff --git a/arch/ppc/platforms/ev64360.h b/arch/ppc/platforms/ev64360.h
deleted file mode 100644
index b30f4722690a..000000000000
--- a/arch/ppc/platforms/ev64360.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Definitions for Marvell EV-64360-BP Evaluation Board.
- *
- * Author: Lee Nicks <allinux@gmail.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/*
- * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- * We'll only use one PCI MEM window on each PCI bus.
- *
- * This is the CPU physical memory map (windows must be at least 64KB and start
- * on a boundary that is a multiple of the window size):
- *
- *    0x42000000-0x4203ffff      - Internal SRAM
- *    0xf1000000-0xf100ffff      - MV64360 Registers (CONFIG_MV64X60_NEW_BASE)
- *    0xfc800000-0xfcffffff      - RTC
- *    0xff000000-0xffffffff      - Boot window, 16 MB flash
- *    0xc0000000-0xc3ffffff      - PCI I/O (second hose)
- *    0x80000000-0xbfffffff      - PCI MEM (second hose)
- */
-
-#ifndef __PPC_PLATFORMS_EV64360_H
-#define __PPC_PLATFORMS_EV64360_H
-
-/* CPU Physical Memory Map setup. */
-#define EV64360_BOOT_WINDOW_BASE		0xff000000
-#define EV64360_BOOT_WINDOW_SIZE		0x01000000 /* 16 MB */
-#define EV64360_INTERNAL_SRAM_BASE		0x42000000
-#define EV64360_RTC_WINDOW_BASE			0xfc800000
-#define EV64360_RTC_WINDOW_SIZE			0x00800000 /* 8 MB */
-
-#define EV64360_PCI1_MEM_START_PROC_ADDR	0x80000000
-#define EV64360_PCI1_MEM_START_PCI_HI_ADDR	0x00000000
-#define EV64360_PCI1_MEM_START_PCI_LO_ADDR	0x80000000
-#define EV64360_PCI1_MEM_SIZE			0x40000000 /* 1 GB */
-#define EV64360_PCI1_IO_START_PROC_ADDR		0xc0000000
-#define EV64360_PCI1_IO_START_PCI_ADDR		0x00000000
-#define EV64360_PCI1_IO_SIZE			0x04000000 /* 64 MB */
-
-#define	EV64360_DEFAULT_BAUD			115200
-#define	EV64360_MPSC_CLK_SRC			8	  /* TCLK */
-#define EV64360_MPSC_CLK_FREQ			133333333
-
-#define	EV64360_MTD_RESERVED_SIZE		0x40000
-#define EV64360_MTD_JFFS2_SIZE			0xec0000
-#define EV64360_MTD_UBOOT_SIZE			0x100000
-
-#define	EV64360_ETH0_PHY_ADDR			8
-#define	EV64360_ETH1_PHY_ADDR			9
-#define	EV64360_ETH2_PHY_ADDR			10
-
-#define EV64360_ETH_TX_QUEUE_SIZE		800
-#define EV64360_ETH_RX_QUEUE_SIZE		400
-
-#define	EV64360_ETH_PORT_CONFIG_VALUE			\
-	ETH_UNICAST_NORMAL_MODE			|	\
-	ETH_DEFAULT_RX_QUEUE_0			|	\
-	ETH_DEFAULT_RX_ARP_QUEUE_0		|	\
-	ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP		|	\
-	ETH_RECEIVE_BC_IF_IP			|	\
-	ETH_RECEIVE_BC_IF_ARP			|	\
-	ETH_CAPTURE_TCP_FRAMES_DIS		|	\
-	ETH_CAPTURE_UDP_FRAMES_DIS		|	\
-	ETH_DEFAULT_RX_TCP_QUEUE_0		|	\
-	ETH_DEFAULT_RX_UDP_QUEUE_0		|	\
-	ETH_DEFAULT_RX_BPDU_QUEUE_0
-
-#define	EV64360_ETH_PORT_CONFIG_EXTEND_VALUE		\
-	ETH_SPAN_BPDU_PACKETS_AS_NORMAL		|	\
-	ETH_PARTITION_DISABLE
-
-#define	GT_ETH_IPG_INT_RX(value)			\
-	((value & 0x3fff) << 8)
-
-#define	EV64360_ETH_PORT_SDMA_CONFIG_VALUE		\
-	ETH_RX_BURST_SIZE_4_64BIT		|	\
-	GT_ETH_IPG_INT_RX(0)			|	\
-	ETH_TX_BURST_SIZE_4_64BIT
-
-#define	EV64360_ETH_PORT_SERIAL_CONTROL_VALUE		\
-	ETH_FORCE_LINK_PASS			|	\
-	ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
-	ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
-	ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
-	ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
-	ETH_FORCE_BP_MODE_NO_JAM		|	\
-	BIT9					|	\
-	ETH_DO_NOT_FORCE_LINK_FAIL		|	\
-	ETH_RETRANSMIT_16_ATTEMPTS		|	\
-	ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
-	ETH_DTE_ADV_0				|	\
-	ETH_DISABLE_AUTO_NEG_BYPASS		|	\
-	ETH_AUTO_NEG_NO_CHANGE			|	\
-	ETH_MAX_RX_PACKET_9700BYTE		|	\
-	ETH_CLR_EXT_LOOPBACK			|	\
-	ETH_SET_FULL_DUPLEX_MODE		|	\
-	ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
-
-static inline u32
-ev64360_bus_freq(void)
-{
-	return 133333333;
-}
-
-#endif	/* __PPC_PLATFORMS_EV64360_H */
diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h
deleted file mode 100644
index 5219366667b3..000000000000
--- a/arch/ppc/platforms/fads.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Motorola 860T FADS board.  Copied from the MBX stuff.
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- *
- * Added MPC86XADS support.
- * The MPC86xADS manual says the board "is compatible with the MPC8xxFADS
- * for SW point of view". This is 99% correct.
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- * 2005 (c) MontaVista Software, Inc.  This file is licensed under the
- * terms of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_FADS_H__
-#define __ASM_FADS_H__
-
-
-#include <asm/ppcboot.h>
-
-/* Memory map is configured by the PROM startup.
- * I tried to follow the FADS manual, although the startup PROM
- * dictates this and we simply have to move some of the physical
- * addresses for Linux.
- */
-#define BCSR_ADDR		((uint)0xff010000)
-
-/* PHY link change interrupt */
-#define PHY_INTERRUPT	SIU_IRQ2
-
-#define BCSR_SIZE		((uint)(64 * 1024))
-#define BCSR0			((uint)(BCSR_ADDR + 0x00))
-#define BCSR1			((uint)(BCSR_ADDR + 0x04))
-#define BCSR2			((uint)(BCSR_ADDR + 0x08))
-#define BCSR3			((uint)(BCSR_ADDR + 0x0c))
-#define BCSR4			((uint)(BCSR_ADDR + 0x10))
-
-#define IMAP_ADDR		((uint)0xff000000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-
-#define PCMCIA_MEM_ADDR		((uint)0xff020000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-
-/* Bits of interest in the BCSRs.
- */
-#define BCSR1_ETHEN		((uint)0x20000000)
-#define BCSR1_IRDAEN		((uint)0x10000000)
-#define BCSR1_RS232EN_1		((uint)0x01000000)
-#define BCSR1_PCCEN		((uint)0x00800000)
-#define BCSR1_PCCVCC0		((uint)0x00400000)
-#define BCSR1_PCCVPP0		((uint)0x00200000)
-#define BCSR1_PCCVPP1		((uint)0x00100000)
-#define BCSR1_PCCVPP_MASK	(BCSR1_PCCVPP0 | BCSR1_PCCVPP1)
-#define BCSR1_RS232EN_2		((uint)0x00040000)
-#define BCSR1_PCCVCC1		((uint)0x00010000)
-#define BCSR1_PCCVCC_MASK	(BCSR1_PCCVCC0 | BCSR1_PCCVCC1)
-
-#define BCSR4_ETHLOOP		((uint)0x80000000)	/* EEST Loopback */
-#define BCSR4_EEFDX		((uint)0x40000000)	/* EEST FDX enable */
-#define BCSR4_FETH_EN		((uint)0x08000000)	/* PHY enable */
-#define BCSR4_FETHCFG0		((uint)0x04000000)	/* PHY autoneg mode */
-#define BCSR4_FETHCFG1		((uint)0x00400000)	/* PHY autoneg mode */
-#define BCSR4_FETHFDE		((uint)0x02000000)	/* PHY FDX advertise */
-#define BCSR4_FETHRST		((uint)0x00200000)	/* PHY Reset */
-
-/* IO_BASE definition for pcmcia.
- */
-#define _IO_BASE	0x80000000
-#define _IO_BASE_SIZE	0x1000
-
-#ifdef CONFIG_IDE
-#define MAX_HWIFS 1
-#endif
-
-/* Interrupt level assignments.
- */
-#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
-
-/* We don't use the 8259.
- */
-#define NR_8259_INTS	0
-
-/* CPM Ethernet through SCC1 or SCC2 */
-
-#if defined(CONFIG_SCC1_ENET) || defined(CONFIG_MPC8xx_SECOND_ETH_SCC1)		/* Probably 860 variant */
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- * TCLK - CLK1, RCLK - CLK2.
- */
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0100)
-#define PA_ENET_RCLK	((ushort)0x0200)
-#define PB_ENET_TENA	((uint)0x00001000)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000002c)
-#endif /* CONFIG_SCC1_ENET */
-
-#ifdef CONFIG_SCC2_ENET		/* Probably 823/850 variant */
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- * TCLK - CLK1, RCLK - CLK2.
- */
-#define PA_ENET_RXD	((ushort)0x0004)
-#define PA_ENET_TXD	((ushort)0x0008)
-#define PA_ENET_TCLK	((ushort)0x0400)
-#define PA_ENET_RCLK	((ushort)0x0200)
-#define PB_ENET_TENA	((uint)0x00002000)
-#define PC_ENET_CLSN	((ushort)0x0040)
-#define PC_ENET_RENA	((ushort)0x0080)
-
-/* Control bits in the SICR to route TCLK and RCLK to
- * SCC2.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00002e00)
-#endif /* CONFIG_SCC2_ENET */
-
-#endif /* __ASM_FADS_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/hdpu.c b/arch/ppc/platforms/hdpu.c
deleted file mode 100644
index 904b518c152e..000000000000
--- a/arch/ppc/platforms/hdpu.c
+++ /dev/null
@@ -1,1015 +0,0 @@
-/*
- * Board setup routines for the Sky Computers HDPU Compute Blade.
- *
- * Written by Brian Waite <waite@skycomputers.com>
- *
- * Based on code done by - Mark A. Greer <mgreer@mvista.com>
- *                         Rabeeh Khoury - rabeeh@galileo.co.il
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/seq_file.h>
-#include <linux/platform_device.h>
-
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/smp.h>
-
-#include <asm/time.h>
-#include <asm/machdep.h>
-#include <asm/todc.h>
-#include <asm/mv64x60.h>
-#include <asm/ppcboot.h>
-#include <platforms/hdpu.h>
-#include <linux/mv643xx.h>
-#include <linux/hdpu_features.h>
-#include <linux/device.h>
-#include <linux/mtd/physmap.h>
-
-#define BOARD_VENDOR	"Sky Computers"
-#define BOARD_MACHINE	"HDPU-CB-A"
-
-bd_t ppcboot_bd;
-int ppcboot_bd_valid = 0;
-
-static mv64x60_handle_t bh;
-
-extern char cmd_line[];
-
-unsigned long hdpu_find_end_of_memory(void);
-void hdpu_mpsc_progress(char *s, unsigned short hex);
-void hdpu_heartbeat(void);
-
-static void parse_bootinfo(unsigned long r3,
-			   unsigned long r4, unsigned long r5,
-			   unsigned long r6, unsigned long r7);
-static void hdpu_set_l1pe(void);
-static void hdpu_cpustate_set(unsigned char new_state);
-#ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(timebase_lock);
-static unsigned int timebase_upper = 0, timebase_lower = 0;
-extern int smp_tb_synchronized;
-
-void __devinit hdpu_tben_give(void);
-void __devinit hdpu_tben_take(void);
-#endif
-
-static int __init
-hdpu_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-
-	if (hose->index == 0) {
-		static char pci_irq_table[][4] = {
-			{HDPU_PCI_0_IRQ, 0, 0, 0},
-			{HDPU_PCI_0_IRQ, 0, 0, 0},
-		};
-
-		const long min_idsel = 1, max_idsel = 2, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	} else {
-		static char pci_irq_table[][4] = {
-			{HDPU_PCI_1_IRQ, 0, 0, 0},
-		};
-
-		const long min_idsel = 1, max_idsel = 1, irqs_per_slot = 4;
-		return PCI_IRQ_TABLE_LOOKUP;
-	}
-}
-
-static void __init hdpu_intr_setup(void)
-{
-	mv64x60_write(&bh, MV64x60_GPP_IO_CNTL,
-		      (1 | (1 << 2) | (1 << 3) | (1 << 4) | (1 << 5) |
-		       (1 << 6) | (1 << 7) | (1 << 12) | (1 << 16) |
-		       (1 << 18) | (1 << 19) | (1 << 20) | (1 << 21) |
-		       (1 << 22) | (1 << 23) | (1 << 24) | (1 << 25) |
-		       (1 << 26) | (1 << 27) | (1 << 28) | (1 << 29)));
-
-	/* XXXX Erranum FEr PCI-#8 */
-	mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1 << 5) | (1 << 9));
-	mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1 << 5) | (1 << 9));
-
-	/*
-	 * Dismiss and then enable interrupt on GPP interrupt cause
-	 * for CPU #0
-	 */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~((1 << 8) | (1 << 13)));
-	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, (1 << 8) | (1 << 13));
-
-	/*
-	 * Dismiss and then enable interrupt on CPU #0 high cause reg
-	 * BIT25 summarizes GPP interrupts 8-15
-	 */
-	mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, (1 << 25));
-}
-
-static void __init hdpu_setup_peripherals(void)
-{
-	unsigned int val;
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-				 HDPU_EMB_FLASH_BASE, HDPU_EMB_FLASH_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
-				 HDPU_TBEN_BASE, HDPU_TBEN_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
-				 HDPU_NEXUS_ID_BASE, HDPU_NEXUS_ID_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-				 HDPU_INTERNAL_SRAM_BASE,
-				 HDPU_INTERNAL_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-
-	bh.ci->disable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN, 0, 0, 0);
-
-	mv64x60_clr_bits(&bh, MV64x60_PCI0_PCI_DECODE_CNTL, (1 << 3));
-	mv64x60_clr_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, (1 << 3));
-	mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
-			 ((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24)));
-
-	/* Enable pipelining */
-	mv64x60_set_bits(&bh, MV64x60_CPU_CONFIG, (1 << 13));
-	/* Enable Snoop Pipelining */
-	mv64x60_set_bits(&bh, MV64360_D_UNIT_CONTROL_HIGH, (1 << 24));
-
-	/*
-	 * Change DRAM read buffer assignment.
-	 * Assign read buffer 0 dedicated only for CPU,
-	 * and the rest read buffer 1.
-	 */
-	val = mv64x60_read(&bh, MV64360_SDRAM_CONFIG);
-	val = val & 0x03ffffff;
-	val = val | 0xf8000000;
-	mv64x60_write(&bh, MV64360_SDRAM_CONFIG, val);
-
-	/*
-	 * Configure internal SRAM -
-	 * Cache coherent write back, if CONFIG_MV64360_SRAM_CACHE_COHERENT set
-	 * Parity enabled.
-	 * Parity error propagation
-	 * Arbitration not parked for CPU only
-	 * Other bits are reserved.
-	 */
-#ifdef CONFIG_MV64360_SRAM_CACHE_COHERENT
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
-#else
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b0);
-#endif
-
-	hdpu_intr_setup();
-}
-
-static void __init hdpu_setup_bridge(void)
-{
-	struct mv64x60_setup_info si;
-	int i;
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = HDPU_BRIDGE_REG_BASE;
-	si.pci_0.enable_bus = 1;
-	si.pci_0.pci_io.cpu_base = HDPU_PCI0_IO_START_PROC_ADDR;
-	si.pci_0.pci_io.pci_base_hi = 0;
-	si.pci_0.pci_io.pci_base_lo = HDPU_PCI0_IO_START_PCI_ADDR;
-	si.pci_0.pci_io.size = HDPU_PCI0_IO_SIZE;
-	si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_mem[0].cpu_base = HDPU_PCI0_MEM_START_PROC_ADDR;
-	si.pci_0.pci_mem[0].pci_base_hi = HDPU_PCI0_MEM_START_PCI_HI_ADDR;
-	si.pci_0.pci_mem[0].pci_base_lo = HDPU_PCI0_MEM_START_PCI_LO_ADDR;
-	si.pci_0.pci_mem[0].size = HDPU_PCI0_MEM_SIZE;
-	si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_cmd_bits = 0;
-	si.pci_0.latency_timer = 0x80;
-
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = HDPU_PCI1_IO_START_PROC_ADDR;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = HDPU_PCI1_IO_START_PCI_ADDR;
-	si.pci_1.pci_io.size = HDPU_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = HDPU_PCI1_MEM_START_PROC_ADDR;
-	si.pci_1.pci_mem[0].pci_base_hi = HDPU_PCI1_MEM_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[0].pci_base_lo = HDPU_PCI1_MEM_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[0].size = HDPU_PCI1_MEM_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x80;
-
-	for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) {
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
-		si.pci_0.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
-#else
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_WB;	/* errata */
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_WB;	/* errata */
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_WB;	/* errata */
-
-		si.pci_0.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-#endif
-	}
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_INIT_PCI);
-
-	/* Lookup PCI host bridges */
-	mv64x60_init(&bh, &si);
-	pci_dram_offset = 0;	/* System mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = hdpu_map_irq;
-
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
-
-	bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
-	mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
-	bh.hose_b->last_busno = 0xff;
-	bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
-		bh.hose_b->first_busno);
-
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_INIT_REG);
-	/*
-	 * Enabling of PCI internal-vs-external arbitration
-	 * is a platform- and errata-dependent decision.
-	 */
-	return;
-}
-
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-static void __init hdpu_early_serial_map(void)
-{
-#ifdef	CONFIG_KGDB
-	static char first_time = 1;
-
-#if defined(CONFIG_KGDB_TTYS0)
-#define KGDB_PORT 0
-#elif defined(CONFIG_KGDB_TTYS1)
-#define KGDB_PORT 1
-#else
-#error "Invalid kgdb_tty port"
-#endif
-
-	if (first_time) {
-		gt_early_mpsc_init(KGDB_PORT,
-				   B9600 | CS8 | CREAD | HUPCL | CLOCAL);
-		first_time = 0;
-	}
-
-	return;
-#endif
-}
-#endif
-
-static void hdpu_init2(void)
-{
-	return;
-}
-
-#if defined(CONFIG_MV643XX_ETH)
-static void __init hdpu_fixup_eth_pdata(struct platform_device *pd)
-{
-
-	struct mv643xx_eth_platform_data *eth_pd;
-	eth_pd = pd->dev.platform_data;
-
-	eth_pd->force_phy_addr = 1;
-	eth_pd->phy_addr = pd->id;
-	eth_pd->speed = SPEED_100;
-	eth_pd->duplex = DUPLEX_FULL;
-	eth_pd->tx_queue_size = 400;
-	eth_pd->rx_queue_size = 800;
-}
-#endif
-
-static void __init hdpu_fixup_mpsc_pdata(struct platform_device *pd)
-{
-
-	struct mpsc_pdata *pdata;
-
-	pdata = (struct mpsc_pdata *)pd->dev.platform_data;
-
-	pdata->max_idle = 40;
-	if (ppcboot_bd_valid)
-		pdata->default_baud = ppcboot_bd.bi_baudrate;
-	else
-		pdata->default_baud = HDPU_DEFAULT_BAUD;
-	pdata->brg_clk_src = HDPU_MPSC_CLK_SRC;
-	pdata->brg_clk_freq = HDPU_MPSC_CLK_FREQ;
-}
-
-#if defined(CONFIG_HDPU_FEATURES)
-static void __init hdpu_fixup_cpustate_pdata(struct platform_device *pd)
-{
-	struct platform_device *pds[1];
-	pds[0] = pd;
-	mv64x60_pd_fixup(&bh, pds, 1);
-}
-#endif
-
-static int hdpu_platform_notify(struct device *dev)
-{
-	static struct {
-		char *bus_id;
-		void ((*rtn) (struct platform_device * pdev));
-	} dev_map[] = {
-		{
-		MPSC_CTLR_NAME ".0", hdpu_fixup_mpsc_pdata},
-#if defined(CONFIG_MV643XX_ETH)
-		{
-		MV643XX_ETH_NAME ".0", hdpu_fixup_eth_pdata},
-#endif
-#if defined(CONFIG_HDPU_FEATURES)
-		{
-		HDPU_CPUSTATE_NAME ".0", hdpu_fixup_cpustate_pdata},
-#endif
-	};
-	struct platform_device *pdev;
-	int i;
-
-	if (dev && dev->bus_id)
-		for (i = 0; i < ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-				     BUS_ID_SIZE)) {
-
-				pdev = container_of(dev,
-						    struct platform_device,
-						    dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-
-static void __init hdpu_setup_arch(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("hdpu_setup_arch: enter", 0);
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	ppc_md.heartbeat = hdpu_heartbeat;
-
-	ppc_md.heartbeat_reset = HZ;
-	ppc_md.heartbeat_count = 1;
-
-	if (ppc_md.progress)
-		ppc_md.progress("hdpu_setup_arch: Enabling L2 cache", 0);
-
-	/* Enable L1 Parity Bits */
-	hdpu_set_l1pe();
-
-	/* Enable L2 and L3 caches (if 745x) */
-	_set_L2CR(0x80080000);
-
-	if (ppc_md.progress)
-		ppc_md.progress("hdpu_setup_arch: enter", 0);
-
-	hdpu_setup_bridge();
-
-	hdpu_setup_peripherals();
-
-#ifdef CONFIG_SERIAL_MPSC_CONSOLE
-	hdpu_early_serial_map();
-#endif
-
-	printk("SKY HDPU Compute Blade \n");
-
-	if (ppc_md.progress)
-		ppc_md.progress("hdpu_setup_arch: exit", 0);
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_OK);
-	return;
-}
-static void __init hdpu_init_irq(void)
-{
-	mv64360_init_irq();
-}
-
-static void __init hdpu_set_l1pe()
-{
-	unsigned long ictrl;
-	asm volatile ("mfspr %0, 1011":"=r" (ictrl):);
-	ictrl |= ICTRL_EICE | ICTRL_EDC | ICTRL_EICP;
-	asm volatile ("mtspr 1011, %0"::"r" (ictrl));
-}
-
-/*
- * Set BAT 1 to map 0xf1000000 to end of physical memory space.
- */
-static __inline__ void hdpu_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf10001fe);
-	mtspr(SPRN_DBAT1L, 0xf100002a);
-	mb();
-
-	return;
-}
-
-unsigned long __init hdpu_find_end_of_memory(void)
-{
-	return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
-				    MV64x60_TYPE_MV64360);
-}
-
-static void hdpu_reset_board(void)
-{
-	volatile int infinite = 1;
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_RESET);
-
-	local_irq_disable();
-
-	/* Clear all the LEDs */
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, ((1 << 4) |
-						   (1 << 5) | (1 << 6)));
-
-	/* disable and invalidate the L2 cache */
-	_set_L2CR(0);
-	_set_L2CR(0x200000);
-
-	/* flush and disable L1 I/D cache */
-	__asm__ __volatile__
-	    ("\n"
-	     "mfspr   3,1008\n"
-	     "ori	5,5,0xcc00\n"
-	     "ori	4,3,0xc00\n"
-	     "andc	5,3,5\n"
-	     "sync\n"
-	     "mtspr	1008,4\n"
-	     "isync\n" "sync\n" "mtspr	1008,5\n" "isync\n" "sync\n");
-
-	/* Hit the reset bit */
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, (1 << 3));
-
-	while (infinite)
-		infinite = infinite;
-
-	return;
-}
-
-static void hdpu_restart(char *cmd)
-{
-	volatile ulong i = 10000000;
-
-	hdpu_reset_board();
-
-	while (i-- > 0) ;
-	panic("restart failed\n");
-}
-
-static void hdpu_halt(void)
-{
-	local_irq_disable();
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_HALT);
-
-	/* Clear all the LEDs */
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, ((1 << 4) | (1 << 5) |
-						   (1 << 6)));
-	while (1) ;
-	/* NOTREACHED */
-}
-
-static void hdpu_power_off(void)
-{
-	hdpu_halt();
-	/* NOTREACHED */
-}
-
-static int hdpu_show_cpuinfo(struct seq_file *m)
-{
-	uint pvid;
-
-	pvid = mfspr(SPRN_PVR);
-	seq_printf(m, "vendor\t\t: Sky Computers\n");
-	seq_printf(m, "machine\t\t: HDPU Compute Blade\n");
-	seq_printf(m, "PVID\t\t: 0x%x, vendor: %s\n",
-		   pvid, (pvid & (1 << 15) ? "IBM" : "Motorola"));
-
-	return 0;
-}
-
-static void __init hdpu_calibrate_decr(void)
-{
-	ulong freq;
-
-	if (ppcboot_bd_valid)
-		freq = ppcboot_bd.bi_busfreq / 4;
-	else
-		freq = 133000000;
-
-	printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       freq / 1000000, freq % 1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	return;
-}
-
-static void parse_bootinfo(unsigned long r3,
-			   unsigned long r4, unsigned long r5,
-			   unsigned long r6, unsigned long r7)
-{
-	bd_t *bd = NULL;
-	char *cmdline_start = NULL;
-	int cmdline_len = 0;
-
-	if (r3) {
-		if ((r3 & 0xf0000000) == 0)
-			r3 += KERNELBASE;
-		if ((r3 & 0xf0000000) == KERNELBASE) {
-			bd = (void *)r3;
-
-			memcpy(&ppcboot_bd, bd, sizeof(ppcboot_bd));
-			ppcboot_bd_valid = 1;
-		}
-	}
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (r4 && r5 && r5 > r4) {
-		if ((r4 & 0xf0000000) == 0)
-			r4 += KERNELBASE;
-		if ((r5 & 0xf0000000) == 0)
-			r5 += KERNELBASE;
-		if ((r4 & 0xf0000000) == KERNELBASE) {
-			initrd_start = r4;
-			initrd_end = r5;
-			initrd_below_start_ok = 1;
-		}
-	}
-#endif				/* CONFIG_BLK_DEV_INITRD */
-
-	if (r6 && r7 && r7 > r6) {
-		if ((r6 & 0xf0000000) == 0)
-			r6 += KERNELBASE;
-		if ((r7 & 0xf0000000) == 0)
-			r7 += KERNELBASE;
-		if ((r6 & 0xf0000000) == KERNELBASE) {
-			cmdline_start = (void *)r6;
-			cmdline_len = (r7 - r6);
-			strncpy(cmd_line, cmdline_start, cmdline_len);
-		}
-	}
-}
-
-void hdpu_heartbeat(void)
-{
-	if (mv64x60_read(&bh, MV64x60_GPP_VALUE) & (1 << 5))
-		mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, (1 << 5));
-	else
-		mv64x60_write(&bh, MV64x60_GPP_VALUE_SET, (1 << 5));
-
-	ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
-
-}
-
-static void __init hdpu_map_io(void)
-{
-	io_block_mapping(0xf1000000, 0xf1000000, 0x20000, _PAGE_IO);
-}
-
-#ifdef CONFIG_SMP
-char hdpu_smp0[] = "SMP Cpu #0";
-char hdpu_smp1[] = "SMP Cpu #1";
-
-static irqreturn_t hdpu_smp_cpu0_int_handler(int irq, void *dev_id)
-{
-	volatile unsigned int doorbell;
-
-	doorbell = mv64x60_read(&bh, MV64360_CPU0_DOORBELL);
-
-	/* Ack the doorbell interrupts */
-	mv64x60_write(&bh, MV64360_CPU0_DOORBELL_CLR, doorbell);
-
-	if (doorbell & 1) {
-		smp_message_recv(0);
-	}
-	if (doorbell & 2) {
-		smp_message_recv(1);
-	}
-	if (doorbell & 4) {
-		smp_message_recv(2);
-	}
-	if (doorbell & 8) {
-		smp_message_recv(3);
-	}
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t hdpu_smp_cpu1_int_handler(int irq, void *dev_id)
-{
-	volatile unsigned int doorbell;
-
-	doorbell = mv64x60_read(&bh, MV64360_CPU1_DOORBELL);
-
-	/* Ack the doorbell interrupts */
-	mv64x60_write(&bh, MV64360_CPU1_DOORBELL_CLR, doorbell);
-
-	if (doorbell & 1) {
-		smp_message_recv(0);
-	}
-	if (doorbell & 2) {
-		smp_message_recv(1);
-	}
-	if (doorbell & 4) {
-		smp_message_recv(2);
-	}
-	if (doorbell & 8) {
-		smp_message_recv(3);
-	}
-	return IRQ_HANDLED;
-}
-
-static void smp_hdpu_CPU_two(void)
-{
-	__asm__ __volatile__
-	    ("\n"
-	     "lis     3,0x0000\n"
-	     "ori     3,3,0x00c0\n"
-	     "mtspr   26, 3\n" "li      4,0\n" "mtspr   27,4\n" "rfi");
-
-}
-
-static int smp_hdpu_probe(void)
-{
-	int *cpu_count_reg;
-	int num_cpus = 0;
-
-	cpu_count_reg = ioremap(HDPU_NEXUS_ID_BASE, HDPU_NEXUS_ID_SIZE);
-	if (cpu_count_reg) {
-		num_cpus = (*cpu_count_reg >> 20) & 0x3;
-		iounmap(cpu_count_reg);
-	}
-
-	/* Validate the bits in the CPLD. If we could not map the reg, return 2.
-	 * If the register reported 0 or 3, return 2.
-	 * Older CPLD revisions set these bits to all ones (val = 3).
-	 */
-	if ((num_cpus < 1) || (num_cpus > 2)) {
-		printk
-		    ("Unable to determine the number of processors %d . deafulting to 2.\n",
-		     num_cpus);
-		num_cpus = 2;
-	}
-	return num_cpus;
-}
-
-static void
-smp_hdpu_message_pass(int target, int msg)
-{
-	if (msg > 0x3) {
-		printk("SMP %d: smp_message_pass: unknown msg %d\n",
-		       smp_processor_id(), msg);
-		return;
-	}
-	switch (target) {
-	case MSG_ALL:
-		mv64x60_write(&bh, MV64360_CPU0_DOORBELL, 1 << msg);
-		mv64x60_write(&bh, MV64360_CPU1_DOORBELL, 1 << msg);
-		break;
-	case MSG_ALL_BUT_SELF:
-		if (smp_processor_id())
-			mv64x60_write(&bh, MV64360_CPU0_DOORBELL, 1 << msg);
-		else
-			mv64x60_write(&bh, MV64360_CPU1_DOORBELL, 1 << msg);
-		break;
-	default:
-		if (target == 0)
-			mv64x60_write(&bh, MV64360_CPU0_DOORBELL, 1 << msg);
-		else
-			mv64x60_write(&bh, MV64360_CPU1_DOORBELL, 1 << msg);
-		break;
-	}
-}
-
-static void smp_hdpu_kick_cpu(int nr)
-{
-	volatile unsigned int *bootaddr;
-
-	if (ppc_md.progress)
-		ppc_md.progress("smp_hdpu_kick_cpu", 0);
-
-	hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR | CPUSTATE_KERNEL_CPU1_KICK);
-
-       /* Disable BootCS. Must also reduce the windows size to zero. */
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN, 0, 0, 0);
-
-	bootaddr = ioremap(HDPU_INTERNAL_SRAM_BASE, HDPU_INTERNAL_SRAM_SIZE);
-	if (!bootaddr) {
-		if (ppc_md.progress)
-			ppc_md.progress("smp_hdpu_kick_cpu: ioremap failed", 0);
-		return;
-	}
-
-	memcpy((void *)(bootaddr + 0x40), (void *)&smp_hdpu_CPU_two, 0x20);
-
-	/* map SRAM to 0xfff00000 */
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-				 0xfff00000, HDPU_INTERNAL_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-
-	/* Enable CPU1 arbitration */
-	mv64x60_clr_bits(&bh, MV64x60_CPU_MASTER_CNTL, (1 << 9));
-
-	/*
-	 * Wait 100mSecond until other CPU has reached __secondary_start.
-	 * When it reaches, it is permittable to rever the SRAM mapping etc...
-	 */
-	mdelay(100);
-	*(unsigned long *)KERNELBASE = nr;
-	asm volatile ("dcbf 0,%0"::"r" (KERNELBASE):"memory");
-
-	iounmap(bootaddr);
-
-	/* Set up window for internal sram (256KByte insize) */
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-				 HDPU_INTERNAL_SRAM_BASE,
-				 HDPU_INTERNAL_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-	/*
-	 * Set up windows for embedded FLASH (using boot CS window).
-	 */
-
-	bh.ci->disable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-				 HDPU_EMB_FLASH_BASE, HDPU_EMB_FLASH_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-}
-
-static void smp_hdpu_setup_cpu(int cpu_nr)
-{
-	if (cpu_nr == 0) {
-		if (ppc_md.progress)
-			ppc_md.progress("smp_hdpu_setup_cpu 0", 0);
-		mv64x60_write(&bh, MV64360_CPU0_DOORBELL_CLR, 0xff);
-		mv64x60_write(&bh, MV64360_CPU0_DOORBELL_MASK, 0xff);
-		request_irq(60, hdpu_smp_cpu0_int_handler,
-			    IRQF_DISABLED, hdpu_smp0, 0);
-	}
-
-	if (cpu_nr == 1) {
-		if (ppc_md.progress)
-			ppc_md.progress("smp_hdpu_setup_cpu 1", 0);
-
-		hdpu_cpustate_set(CPUSTATE_KERNEL_MAJOR |
-				  CPUSTATE_KERNEL_CPU1_OK);
-
-		/* Enable L1 Parity Bits */
-		hdpu_set_l1pe();
-
-		/* Enable L2 cache */
-		_set_L2CR(0);
-		_set_L2CR(0x80080000);
-
-		mv64x60_write(&bh, MV64360_CPU1_DOORBELL_CLR, 0x0);
-		mv64x60_write(&bh, MV64360_CPU1_DOORBELL_MASK, 0xff);
-		request_irq(28, hdpu_smp_cpu1_int_handler,
-			    IRQF_DISABLED, hdpu_smp1, 0);
-	}
-
-}
-
-void __devinit hdpu_tben_give()
-{
-	volatile unsigned long *val = 0;
-
-	/* By writing 0 to the TBEN_BASE, the timebases is frozen */
-	val = ioremap(HDPU_TBEN_BASE, 4);
-	*val = 0;
-	mb();
-
-	spin_lock(&timebase_lock);
-	timebase_upper = get_tbu();
-	timebase_lower = get_tbl();
-	spin_unlock(&timebase_lock);
-
-	while (timebase_upper || timebase_lower)
-		barrier();
-
-	/* By writing 1 to the TBEN_BASE, the timebases is thawed */
-	*val = 1;
-	mb();
-
-	iounmap(val);
-
-}
-
-void __devinit hdpu_tben_take()
-{
-	while (!(timebase_upper || timebase_lower))
-		barrier();
-
-	spin_lock(&timebase_lock);
-	set_tb(timebase_upper, timebase_lower);
-	timebase_upper = 0;
-	timebase_lower = 0;
-	spin_unlock(&timebase_lock);
-}
-
-static struct smp_ops_t hdpu_smp_ops = {
-	.message_pass = smp_hdpu_message_pass,
-	.probe = smp_hdpu_probe,
-	.kick_cpu = smp_hdpu_kick_cpu,
-	.setup_cpu = smp_hdpu_setup_cpu,
-	.give_timebase = hdpu_tben_give,
-	.take_timebase = hdpu_tben_take,
-};
-#endif				/* CONFIG_SMP */
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(r3, r4, r5, r6, r7);
-
-	isa_mem_base = 0;
-
-	ppc_md.setup_arch = hdpu_setup_arch;
-	ppc_md.init = hdpu_init2;
-	ppc_md.show_cpuinfo = hdpu_show_cpuinfo;
-	ppc_md.init_IRQ = hdpu_init_irq;
-	ppc_md.get_irq = mv64360_get_irq;
-	ppc_md.restart = hdpu_restart;
-	ppc_md.power_off = hdpu_power_off;
-	ppc_md.halt = hdpu_halt;
-	ppc_md.find_end_of_memory = hdpu_find_end_of_memory;
-	ppc_md.calibrate_decr = hdpu_calibrate_decr;
-	ppc_md.setup_io_mappings = hdpu_map_io;
-
-	bh.p_base = CONFIG_MV64X60_NEW_BASE;
-	bh.v_base = (unsigned long *)bh.p_base;
-
-	hdpu_set_bat();
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG)
-	ppc_md.progress = hdpu_mpsc_progress;	/* embedded UART */
-	mv64x60_progress_init(bh.p_base);
-#endif				/* CONFIG_SERIAL_TEXT_DEBUG */
-
-#ifdef CONFIG_SMP
-	smp_ops = &hdpu_smp_ops;
-#endif				/* CONFIG_SMP */
-
-#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH)
-	platform_notify = hdpu_platform_notify;
-#endif
-	return;
-}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
-/* SMP safe version of the serial text debug routine. Uses Semaphore 0 */
-void hdpu_mpsc_progress(char *s, unsigned short hex)
-{
-	while (mv64x60_read(&bh, MV64360_WHO_AM_I) !=
-	       mv64x60_read(&bh, MV64360_SEMAPHORE_0)) {
-	}
-	mv64x60_mpsc_progress(s, hex);
-	mv64x60_write(&bh, MV64360_SEMAPHORE_0, 0xff);
-}
-#endif
-
-static void hdpu_cpustate_set(unsigned char new_state)
-{
-	unsigned int state = (new_state << 21);
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, (0xff << 21));
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, state);
-}
-
-#ifdef CONFIG_MTD_PHYSMAP
-static struct mtd_partition hdpu_partitions[] = {
-	{
-	 .name = "Root FS",
-	 .size = 0x03400000,
-	 .offset = 0,
-	 .mask_flags = 0,
-	 },{
-	 .name = "User FS",
-	 .size = 0x00800000,
-	 .offset = 0x03400000,
-	 .mask_flags = 0,
-	 },{
-	 .name = "Kernel Image",
-	 .size = 0x002C0000,
-	 .offset = 0x03C00000,
-	 .mask_flags = 0,
-	 },{
-	 .name = "bootEnv",
-	 .size = 0x00040000,
-	 .offset = 0x03EC0000,
-	 .mask_flags = 0,
-	 },{
-	 .name = "bootROM",
-	 .size = 0x00100000,
-	 .offset = 0x03F00000,
-	 .mask_flags = 0,
-	 }
-};
-
-static int __init hdpu_setup_mtd(void)
-{
-
-	physmap_set_partitions(hdpu_partitions, 5);
-	return 0;
-}
-
-arch_initcall(hdpu_setup_mtd);
-#endif
-
-#ifdef CONFIG_HDPU_FEATURES
-
-static struct resource hdpu_cpustate_resources[] = {
-	[0] = {
-	       .name = "addr base",
-	       .start = MV64x60_GPP_VALUE_SET,
-	       .end = MV64x60_GPP_VALUE_CLR + 1,
-	       .flags = IORESOURCE_MEM,
-	       },
-};
-
-static struct resource hdpu_nexus_resources[] = {
-	[0] = {
-	       .name = "nexus register",
-	       .start = HDPU_NEXUS_ID_BASE,
-	       .end = HDPU_NEXUS_ID_BASE + HDPU_NEXUS_ID_SIZE,
-	       .flags = IORESOURCE_MEM,
-	       },
-};
-
-static struct platform_device hdpu_cpustate_device = {
-	.name = HDPU_CPUSTATE_NAME,
-	.id = 0,
-	.num_resources = ARRAY_SIZE(hdpu_cpustate_resources),
-	.resource = hdpu_cpustate_resources,
-};
-
-static struct platform_device hdpu_nexus_device = {
-	.name = HDPU_NEXUS_NAME,
-	.id = 0,
-	.num_resources = ARRAY_SIZE(hdpu_nexus_resources),
-	.resource = hdpu_nexus_resources,
-};
-
-static int __init hdpu_add_pds(void)
-{
-	platform_device_register(&hdpu_cpustate_device);
-	platform_device_register(&hdpu_nexus_device);
-	return 0;
-}
-
-arch_initcall(hdpu_add_pds);
-#endif
diff --git a/arch/ppc/platforms/hdpu.h b/arch/ppc/platforms/hdpu.h
deleted file mode 100644
index f9e020b6970c..000000000000
--- a/arch/ppc/platforms/hdpu.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * Definitions for Sky Computers HDPU board.
- *
- * Brian Waite <waite@skycomputers.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by Mark A. Greer <mgreer@mvista.com>
- * Based on code done by  Tim Montgomery <timm@artesyncp.com>
- *
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/*
- * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- * We'll only use one PCI MEM window on each PCI bus.
- *
- * This is the CPU physical memory map (windows must be at least 64K and start
- * on a boundary that is a multiple of the window size):
- *
- *    0x80000000-0x8fffffff	 - PCI 0 MEM
- *    0xa0000000-0xafffffff	 - PCI 1 MEM
- *    0xc0000000-0xc0ffffff	 - PCI 0 I/O
- *    0xc1000000-0xc1ffffff	 - PCI 1 I/O
-
- *    0xf1000000-0xf100ffff      - MV64360 Registers
- *    0xf1010000-0xfb9fffff      - HOLE
- *    0xfbfa0000-0xfbfaffff      - TBEN
- *    0xfbf00000-0xfbfbffff      - NEXUS
- *    0xfbfc0000-0xfbffffff      - Internal SRAM
- *    0xfc000000-0xffffffff      - Boot window
- */
-
-#ifndef __PPC_PLATFORMS_HDPU_H
-#define __PPC_PLATFORMS_HDPU_H
-
-/* CPU Physical Memory Map setup. */
-#define	HDPU_BRIDGE_REG_BASE		     0xf1000000
-
-#define HDPU_TBEN_BASE                        0xfbfa0000
-#define HDPU_TBEN_SIZE                        0x00010000
-#define HDPU_NEXUS_ID_BASE                    0xfbfb0000
-#define HDPU_NEXUS_ID_SIZE                    0x00010000
-#define HDPU_INTERNAL_SRAM_BASE               0xfbfc0000
-#define HDPU_INTERNAL_SRAM_SIZE               0x00040000
-#define	HDPU_EMB_FLASH_BASE		      0xfc000000
-#define	HDPU_EMB_FLASH_SIZE      	      0x04000000
-
-/* PCI Mappings */
-
-#define HDPU_PCI0_MEM_START_PROC_ADDR         0x80000000
-#define HDPU_PCI0_MEM_START_PCI_HI_ADDR       0x00000000
-#define HDPU_PCI0_MEM_START_PCI_LO_ADDR       HDPU_PCI0_MEM_START_PROC_ADDR
-#define HDPU_PCI0_MEM_SIZE                    0x10000000
-
-#define HDPU_PCI1_MEM_START_PROC_ADDR         0xc0000000
-#define HDPU_PCI1_MEM_START_PCI_HI_ADDR       0x00000000
-#define HDPU_PCI1_MEM_START_PCI_LO_ADDR       HDPU_PCI1_MEM_START_PROC_ADDR
-#define HDPU_PCI1_MEM_SIZE                    0x20000000
-
-#define HDPU_PCI0_IO_START_PROC_ADDR          0xc0000000
-#define HDPU_PCI0_IO_START_PCI_ADDR           0x00000000
-#define HDPU_PCI0_IO_SIZE                     0x01000000
-
-#define HDPU_PCI1_IO_START_PROC_ADDR          0xc1000000
-#define HDPU_PCI1_IO_START_PCI_ADDR           0x01000000
-#define HDPU_PCI1_IO_SIZE                     0x01000000
-
-#define HDPU_DEFAULT_BAUD 115200
-#define HDPU_MPSC_CLK_SRC 8	/* TCLK */
-#define HDPU_MPSC_CLK_FREQ 133000000	/* 133 Mhz */
-
-#define	HDPU_PCI_0_IRQ		(8+64)
-#define	HDPU_PCI_1_IRQ		(13+64)
-
-#endif				/* __PPC_PLATFORMS_HDPU_H */
diff --git a/arch/ppc/platforms/hermes.h b/arch/ppc/platforms/hermes.h
deleted file mode 100644
index de91afff8ca1..000000000000
--- a/arch/ppc/platforms/hermes.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Multidata HERMES-PRO ( / SL ) board specific definitions
- *
- * Copyright (c) 2000, 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_HERMES_H
-#define __MACH_HERMES_H
-
-
-#include <asm/ppcboot.h>
-
-#define	HERMES_IMMR_BASE    0xFF000000	/* phys. addr of IMMR			*/
-#define	HERMES_IMAP_SIZE   (64 * 1024)	/* size of mapped area			*/
-
-#define	IMAP_ADDR     HERMES_IMMR_BASE	/* physical base address of IMMR area	*/
-#define IMAP_SIZE     HERMES_IMAP_SIZE	/* mapped size of IMMR area		*/
-
-#define	FEC_INTERRUPT	 9		/* = SIU_LEVEL4				*/
-#define	CPM_INTERRUPT	11		/* = SIU_LEVEL5 (was: SIU_LEVEL2)	*/
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_HERMES_H */
diff --git a/arch/ppc/platforms/ip860.h b/arch/ppc/platforms/ip860.h
deleted file mode 100644
index 2f1f86ce1447..000000000000
--- a/arch/ppc/platforms/ip860.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * MicroSys IP860 VMEBus board specific definitions
- *
- * Copyright (c) 2000, 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_IP860_H
-#define __MACH_IP860_H
-
-
-#include <asm/ppcboot.h>
-
-#define	IP860_IMMR_BASE	0xF1000000	/* phys. addr of IMMR			*/
-#define	IP860_IMAP_SIZE	(64 * 1024)	/* size of mapped area			*/
-
-#define	IMAP_ADDR	IP860_IMMR_BASE	/* physical base address of IMMR area	*/
-#define IMAP_SIZE	IP860_IMAP_SIZE	/* mapped size of IMMR area		*/
-
-/*
- * MPC8xx Chip Select Usage
- */
-#define	IP860_BOOT_CS		0	/* Boot (VMEBus or Flash) Chip Select 0	*/
-#define IP860_FLASH_CS		1	/* Flash	    is on Chip Select 1	*/
-#define IP860_SDRAM_CS		2	/* SDRAM	    is on Chip Select 2	*/
-#define	IP860_SRAM_CS		3	/* SRAM		    is on Chip Select 3	*/
-#define IP860_BCSR_CS		4	/* BCSR		    is on Chip Select 4	*/
-#define IP860_IP_CS		5	/* IP Slots	   are on Chip Select 5	*/
-#define IP860_VME_STD_CS	6	/* VME Standard I/O is on Chip Select 6	*/
-#define IP860_VME_SHORT_CS	7	/* VME Short    I/O is on Chip Select 7	*/
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_IP860_H */
diff --git a/arch/ppc/platforms/ivms8.h b/arch/ppc/platforms/ivms8.h
deleted file mode 100644
index 9109e684ad9b..000000000000
--- a/arch/ppc/platforms/ivms8.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Speech Design Integrated Voicemail board specific definitions
- * - IVMS8  (small,  8 channels)
- * - IVML24 (large, 24 channels)
- *
- * In 2.5 when we force a new bootloader, we can merge these two, and add
- * in _MACH_'s for them. -- Tom
- *
- * Copyright (c) 2000, 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IVMS8_H__
-#define __ASM_IVMS8_H__
-
-
-#include <asm/ppcboot.h>
-
-#define IVMS_IMMR_BASE	0xFFF00000	/* phys. addr of IMMR */
-#define IVMS_IMAP_SIZE	(64 * 1024)	/* size of mapped area */
-
-#define IMAP_ADDR	IVMS_IMMR_BASE	/* phys. base address of IMMR area */
-#define IMAP_SIZE	IVMS_IMAP_SIZE	/* mapped size of IMMR area */
-
-#define PCMCIA_MEM_ADDR	((uint)0xFE100000)
-#define PCMCIA_MEM_SIZE	((uint)(64 * 1024))
-
-#define FEC_INTERRUPT	 9		/* = SIU_LEVEL4 */
-#define IDE0_INTERRUPT	10		/* = IRQ5 */
-#define CPM_INTERRUPT	11		/* = SIU_LEVEL5 (was: SIU_LEVEL2) */
-#define PHY_INTERRUPT	12		/* = IRQ6 */
-
-/* override the default number of IDE hardware interfaces */
-#define MAX_HWIFS	1
-
-/*
- * Definitions for IDE0 Interface
- */
-#define IDE0_BASE_OFFSET		0x0000	/* Offset in PCMCIA memory */
-#define IDE0_DATA_REG_OFFSET		0x0000
-#define IDE0_ERROR_REG_OFFSET		0x0081
-#define IDE0_NSECTOR_REG_OFFSET		0x0082
-#define IDE0_SECTOR_REG_OFFSET		0x0083
-#define IDE0_LCYL_REG_OFFSET		0x0084
-#define IDE0_HCYL_REG_OFFSET		0x0085
-#define IDE0_SELECT_REG_OFFSET		0x0086
-#define IDE0_STATUS_REG_OFFSET		0x0087
-#define IDE0_CONTROL_REG_OFFSET		0x0106
-#define IDE0_IRQ_REG_OFFSET		0x000A	/* not used */
-
-/* We don't use the 8259. */
-#define NR_8259_INTS	0
-
-#endif /* __ASM_IVMS8_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c
deleted file mode 100644
index fe6e88cdb1cd..000000000000
--- a/arch/ppc/platforms/katana.c
+++ /dev/null
@@ -1,902 +0,0 @@
-/*
- * Board setup routines for the Artesyn Katana cPCI boards.
- *
- * Author: Tim Montgomery <timm@artesyncp.com>
- * Maintained by: Mark A. Greer <mgreer@mvista.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by - Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-/*
- * Supports the Artesyn 750i, 752i, and 3750.  The 752i is virtually identical
- * to the 750i except that it has an mv64460 bridge.
- */
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/console.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-#include <asm/io.h>
-#include <asm/unistd.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/smp.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/ppcboot.h>
-#include <asm/mv64x60.h>
-#include <platforms/katana.h>
-#include <asm/machdep.h>
-
-static struct mv64x60_handle	bh;
-static katana_id_t		katana_id;
-static void __iomem		*cpld_base;
-static void __iomem		*sram_base;
-static u32			katana_flash_size_0;
-static u32			katana_flash_size_1;
-static u32			katana_bus_frequency;
-static struct pci_controller	katana_hose_a;
-
-unsigned char	__res[sizeof(bd_t)];
-
-/* PCI Interrupt routing */
-static int __init
-katana_irq_lookup_750i(unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 *       A   B   C   D
-		 */
-		/* IDSEL 4  (PMC 1) */
-		{ KATANA_PCI_INTB_IRQ_750i, KATANA_PCI_INTC_IRQ_750i,
-			KATANA_PCI_INTD_IRQ_750i, KATANA_PCI_INTA_IRQ_750i },
-		/* IDSEL 5  (PMC 2) */
-		{ KATANA_PCI_INTC_IRQ_750i, KATANA_PCI_INTD_IRQ_750i,
-			KATANA_PCI_INTA_IRQ_750i, KATANA_PCI_INTB_IRQ_750i },
-		/* IDSEL 6 (T8110) */
-		{KATANA_PCI_INTD_IRQ_750i, 0, 0, 0 },
-		/* IDSEL 7 (unused) */
-		{0, 0, 0, 0 },
-		/* IDSEL 8 (Intel 82544) (752i only but doesn't harm 750i) */
-		{KATANA_PCI_INTD_IRQ_750i, 0, 0, 0 },
-	};
-	const long min_idsel = 4, max_idsel = 8, irqs_per_slot = 4;
-
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static int __init
-katana_irq_lookup_3750(unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 *       A   B   C   D
-		 */
-		{ KATANA_PCI_INTA_IRQ_3750, 0, 0, 0 }, /* IDSEL 3 (BCM5691) */
-		{ KATANA_PCI_INTB_IRQ_3750, 0, 0, 0 }, /* IDSEL 4 (MV64360 #2)*/
-		{ KATANA_PCI_INTC_IRQ_3750, 0, 0, 0 }, /* IDSEL 5 (MV64360 #3)*/
-	};
-	const long min_idsel = 3, max_idsel = 5, irqs_per_slot = 4;
-
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static int __init
-katana_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	switch (katana_id) {
-	case KATANA_ID_750I:
-	case KATANA_ID_752I:
-		return katana_irq_lookup_750i(idsel, pin);
-
-	case KATANA_ID_3750:
-		return katana_irq_lookup_3750(idsel, pin);
-
-	default:
-		printk(KERN_ERR "Bogus board ID\n");
-		return 0;
-	}
-}
-
-/* Board info retrieval routines */
-void __init
-katana_get_board_id(void)
-{
-	switch (in_8(cpld_base + KATANA_CPLD_PRODUCT_ID)) {
-	case KATANA_PRODUCT_ID_3750:
-		katana_id = KATANA_ID_3750;
-		break;
-
-	case KATANA_PRODUCT_ID_750i:
-		katana_id = KATANA_ID_750I;
-		break;
-
-	case KATANA_PRODUCT_ID_752i:
-		katana_id = KATANA_ID_752I;
-		break;
-
-	default:
-		printk(KERN_ERR "Unsupported board\n");
-	}
-}
-
-int __init
-katana_get_proc_num(void)
-{
-	u16		val;
-	u8		save_exclude;
-	static int	proc = -1;
-	static u8	first_time = 1;
-
-	if (first_time) {
-		if (katana_id != KATANA_ID_3750)
-			proc = 0;
-		else {
-			save_exclude = mv64x60_pci_exclude_bridge;
-			mv64x60_pci_exclude_bridge = 0;
-
-			early_read_config_word(bh.hose_b, 0,
-				PCI_DEVFN(0,0), PCI_DEVICE_ID, &val);
-
-			mv64x60_pci_exclude_bridge = save_exclude;
-
-			switch(val) {
-			case PCI_DEVICE_ID_KATANA_3750_PROC0:
-				proc = 0;
-				break;
-
-			case PCI_DEVICE_ID_KATANA_3750_PROC1:
-				proc = 1;
-				break;
-
-			case PCI_DEVICE_ID_KATANA_3750_PROC2:
-				proc = 2;
-				break;
-
-			default:
-				printk(KERN_ERR "Bogus Device ID\n");
-			}
-		}
-
-		first_time = 0;
-	}
-
-	return proc;
-}
-
-static inline int
-katana_is_monarch(void)
-{
-	return in_8(cpld_base + KATANA_CPLD_BD_CFG_3) &
-		KATANA_CPLD_BD_CFG_3_MONARCH;
-}
-
-static void __init
-katana_setup_bridge(void)
-{
-	struct pci_controller hose;
-	struct mv64x60_setup_info si;
-	void __iomem *vaddr;
-	int i;
-	u32 v;
-	u16 val, type;
-	u8 save_exclude;
-
-	/*
-	 * Some versions of the Katana firmware mistakenly change the vendor
-	 * & device id fields in the bridge's pci device (visible via pci
-	 * config accesses).  This breaks mv64x60_init() because those values
-	 * are used to identify the type of bridge that's there.  Artesyn
-	 * claims that the subsystem vendor/device id's will have the correct
-	 * Marvell values so this code puts back the correct values from there.
-	 */
-	memset(&hose, 0, sizeof(hose));
-	vaddr = ioremap(CONFIG_MV64X60_NEW_BASE, MV64x60_INTERNAL_SPACE_SIZE);
-	setup_indirect_pci_nomap(&hose, vaddr + MV64x60_PCI0_CONFIG_ADDR,
-		vaddr + MV64x60_PCI0_CONFIG_DATA);
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID, &val);
-
-	if (val != PCI_VENDOR_ID_MARVELL) {
-		early_read_config_word(&hose, 0, PCI_DEVFN(0, 0),
-			PCI_SUBSYSTEM_VENDOR_ID, &val);
-		early_write_config_word(&hose, 0, PCI_DEVFN(0, 0),
-			PCI_VENDOR_ID, val);
-		early_read_config_word(&hose, 0, PCI_DEVFN(0, 0),
-			PCI_SUBSYSTEM_ID, &val);
-		early_write_config_word(&hose, 0, PCI_DEVFN(0, 0),
-			PCI_DEVICE_ID, val);
-	}
-
-	/*
-	 * While we're in here, set the hotswap register correctly.
-	 * Turn off blue LED; mask ENUM#, clear insertion & extraction bits.
-	 */
-	early_read_config_dword(&hose, 0, PCI_DEVFN(0, 0),
-		MV64360_PCICFG_CPCI_HOTSWAP, &v);
-	v &= ~(1<<19);
-	v |= ((1<<17) | (1<<22) | (1<<23));
-	early_write_config_dword(&hose, 0, PCI_DEVFN(0, 0),
-		MV64360_PCICFG_CPCI_HOTSWAP, v);
-
-	/* While we're at it, grab the bridge type for later */
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_DEVICE_ID, &type);
-
-	mv64x60_pci_exclude_bridge = save_exclude;
-	iounmap(vaddr);
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = KATANA_PCI1_IO_START_PROC_ADDR;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = KATANA_PCI1_IO_START_PCI_ADDR;
-	si.pci_1.pci_io.size = KATANA_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = KATANA_PCI1_MEM_START_PROC_ADDR;
-	si.pci_1.pci_mem[0].pci_base_hi = KATANA_PCI1_MEM_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[0].pci_base_lo = KATANA_PCI1_MEM_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[0].size = KATANA_PCI1_MEM_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x80;
-
-	for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) {
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
-
-		si.pci_1.acc_cntl_options[i] =
-			MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-			MV64360_PCI_ACC_CNTL_SWAP_NONE |
-			MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-			MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-#else
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_WB;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_WB;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_WB;
-
-		si.pci_1.acc_cntl_options[i] =
-			MV64360_PCI_ACC_CNTL_SNOOP_WB |
-			MV64360_PCI_ACC_CNTL_SWAP_NONE |
-			MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-			((type == PCI_DEVICE_ID_MARVELL_MV64360) ?
-				MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES :
-				MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES);
-#endif
-	}
-
-	/* Lookup PCI host bridges */
-	if (mv64x60_init(&bh, &si))
-		printk(KERN_WARNING "Bridge initialization failed.\n");
-
-	pci_dram_offset = 0; /* sys mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = katana_map_irq;
-	ppc_md.pci_exclude_device = mv64x60_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 1, 0);
-	bh.hose_b->first_busno = 0;
-	bh.hose_b->last_busno = 0xff;
-
-	/*
-	 * Need to access hotswap reg which is in the pci config area of the
-	 * bridge's hose 0.  Note that pcibios_alloc_controller() can't be used
-	 * to alloc hose_a b/c that would make hose 0 known to the generic
-	 * pci code which we don't want.
-	 */
-	bh.hose_a = &katana_hose_a;
-	setup_indirect_pci_nomap(bh.hose_a,
-		bh.v_base + MV64x60_PCI0_CONFIG_ADDR,
-		bh.v_base + MV64x60_PCI0_CONFIG_DATA);
-}
-
-/* Bridge & platform setup routines */
-void __init
-katana_intr_setup(void)
-{
-	if (bh.type == MV64x60_TYPE_MV64460) /* As per instns from Marvell */
-		mv64x60_clr_bits(&bh, MV64x60_CPU_MASTER_CNTL, 1 << 15);
-
-	/* MPP 8, 9, and 10 */
-	mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0xfff);
-
-	/* MPP 14 */
-	if ((katana_id == KATANA_ID_750I) || (katana_id == KATANA_ID_752I))
-		mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0x0f000000);
-
-	/*
-	 * Define GPP 8,9,and 10 interrupt polarity as active low
-	 * input signal and level triggered
-	 */
-	mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, 0x700);
-	mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, 0x700);
-
-	if ((katana_id == KATANA_ID_750I) || (katana_id == KATANA_ID_752I)) {
-		mv64x60_set_bits(&bh, MV64x60_GPP_LEVEL_CNTL, (1<<14));
-		mv64x60_clr_bits(&bh, MV64x60_GPP_IO_CNTL, (1<<14));
-	}
-
-	/* Config GPP intr ctlr to respond to level trigger */
-	mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10));
-
-	if (bh.type == MV64x60_TYPE_MV64360) {
-		/* Erratum FEr PCI-#9 */
-		mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD,
-				(1<<4) | (1<<5) | (1<<6) | (1<<7));
-		mv64x60_set_bits(&bh, MV64x60_PCI1_CMD, (1<<8) | (1<<9));
-	} else {
-		mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<6) | (1<<7));
-		mv64x60_set_bits(&bh, MV64x60_PCI1_CMD,
-				(1<<4) | (1<<5) | (1<<8) | (1<<9));
-	}
-
-	/*
-	 * Dismiss and then enable interrupt on GPP interrupt cause
-	 * for CPU #0
-	 */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~0x700);
-	mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, 0x700);
-
-	if ((katana_id == KATANA_ID_750I) || (katana_id == KATANA_ID_752I)) {
-		mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~(1<<14));
-		mv64x60_set_bits(&bh, MV64x60_GPP_INTR_MASK, (1<<14));
-	}
-
-	/*
-	 * Dismiss and then enable interrupt on CPU #0 high cause reg
-	 * BIT25 summarizes GPP interrupts 8-15
-	 */
-	mv64x60_set_bits(&bh, MV64360_IC_CPU0_INTR_MASK_HI, (1<<25));
-}
-
-void __init
-katana_setup_peripherals(void)
-{
-	u32 base;
-
-	/* Set up windows for boot CS, soldered & socketed flash, and CPLD */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-		 KATANA_BOOT_WINDOW_BASE, KATANA_BOOT_WINDOW_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	/* Assume firmware set up window sizes correctly for dev 0 & 1 */
-	mv64x60_get_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN, &base,
-		&katana_flash_size_0);
-
-	if (katana_flash_size_0 > 0) {
-		mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_0_WIN,
-			 KATANA_SOLDERED_FLASH_BASE, katana_flash_size_0, 0);
-		bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_0_WIN);
-	}
-
-	mv64x60_get_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN, &base,
-		&katana_flash_size_1);
-
-	if (katana_flash_size_1 > 0) {
-		mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_1_WIN,
-			 (KATANA_SOLDERED_FLASH_BASE + katana_flash_size_0),
-			 katana_flash_size_1, 0);
-		bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_1_WIN);
-	}
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
-		 KATANA_SOCKET_BASE, KATANA_SOCKETED_FLASH_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
-		 KATANA_CPLD_BASE, KATANA_CPLD_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-	cpld_base = ioremap(KATANA_CPLD_BASE, KATANA_CPLD_SIZE);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-		 KATANA_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-	sram_base = ioremap(KATANA_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE);
-
-	/* Set up Enet->SRAM window */
-	mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN,
-		KATANA_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE, 0x2);
-	bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN);
-
-	/* Give enet r/w access to memory region */
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_0, (0x3 << (4 << 1)));
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_1, (0x3 << (4 << 1)));
-	mv64x60_set_bits(&bh, MV64360_ENET2MEM_ACC_PROT_2, (0x3 << (4 << 1)));
-
-	mv64x60_clr_bits(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, (1 << 3));
-	mv64x60_clr_bits(&bh, MV64x60_TIMR_CNTR_0_3_CNTL,
-			 ((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24)));
-
-	/* Must wait until window set up before retrieving board id */
-	katana_get_board_id();
-
-	/* Enumerate pci bus (must know board id before getting proc number) */
-	if (katana_get_proc_num() == 0)
-		bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b, 0);
-
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x00160000);
-#else
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, 0x001600b2);
-#endif
-
-	/*
-	 * Setting the SRAM to 0. Note that this generates parity errors on
-	 * internal data path in SRAM since it's first time accessing it
-	 * while after reset it's not configured.
-	 */
-	memset(sram_base, 0, MV64360_SRAM_SIZE);
-
-	/* Only processor zero [on 3750] is an PCI interrupt controller */
-	if (katana_get_proc_num() == 0)
-		katana_intr_setup();
-}
-
-static void __init
-katana_enable_ipmi(void)
-{
-	u8 reset_out;
-
-	/* Enable access to IPMI ctlr by clearing IPMI PORTSEL bit in CPLD */
-	reset_out = in_8(cpld_base + KATANA_CPLD_RESET_OUT);
-	reset_out &= ~KATANA_CPLD_RESET_OUT_PORTSEL;
-	out_8(cpld_base + KATANA_CPLD_RESET_OUT, reset_out);
-}
-
-static void __init
-katana_setup_arch(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("katana_setup_arch: enter", 0);
-
-	set_tb(0, 0);
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef   CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	/*
-	 * Set up the L2CR register.
-	 *
-	 * 750FX has only L2E, L2PE (bits 2-8 are reserved)
-	 * DD2.0 has bug that requires the L2 to be in WRT mode
-	 * avoid dirty data in cache
-	 */
-	if (PVR_REV(mfspr(SPRN_PVR)) == 0x0200) {
-		printk(KERN_INFO "DD2.0 detected. Setting L2 cache"
-			"to Writethrough mode\n");
-		_set_L2CR(L2CR_L2E | L2CR_L2PE | L2CR_L2WT);
-	} else
-		_set_L2CR(L2CR_L2E | L2CR_L2PE);
-
-	if (ppc_md.progress)
-		ppc_md.progress("katana_setup_arch: calling setup_bridge", 0);
-
-	katana_setup_bridge();
-	katana_setup_peripherals();
-	katana_enable_ipmi();
-
-	katana_bus_frequency = katana_bus_freq(cpld_base);
-
-	printk(KERN_INFO "Artesyn Communication Products, LLC - Katana(TM)\n");
-	if (ppc_md.progress)
-		ppc_md.progress("katana_setup_arch: exit", 0);
-}
-
-void
-katana_fixup_resources(struct pci_dev *dev)
-{
-	u16	v16;
-
-	pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, L1_CACHE_BYTES>>2);
-
-	pci_read_config_word(dev, PCI_COMMAND, &v16);
-	v16 |= PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK;
-	pci_write_config_word(dev, PCI_COMMAND, v16);
-}
-
-static const unsigned int cpu_750xx[32] = { /* 750FX & 750GX */
-	 0,  0,  2,  2,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,/* 0-15*/
-	16, 17, 18, 19, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40,  0 /*16-31*/
-};
-
-static int
-katana_get_cpu_freq(void)
-{
-	unsigned long	pll_cfg;
-
-	pll_cfg = (mfspr(SPRN_HID1) & 0xf8000000) >> 27;
-	return katana_bus_frequency * cpu_750xx[pll_cfg]/2;
-}
-
-/* Platform device data fixup routines. */
-#if defined(CONFIG_SERIAL_MPSC)
-static void __init
-katana_fixup_mpsc_pdata(struct platform_device *pdev)
-{
-	struct mpsc_pdata *pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
-	bd_t *bdp = (bd_t *)__res;
-
-	if (bdp->bi_baudrate)
-		pdata->default_baud = bdp->bi_baudrate;
-	else
-		pdata->default_baud = KATANA_DEFAULT_BAUD;
-
-	pdata->max_idle = 40;
-	pdata->brg_clk_src = KATANA_MPSC_CLK_SRC;
-	/*
-	 * TCLK (not SysCLk) is routed to BRG, then to the MPSC.  On most parts,
-	 * TCLK == SysCLK but on 64460, they are separate pins.
-	 * SysCLK can go up to 200 MHz but TCLK can only go up to 133 MHz.
-	 */
-	pdata->brg_clk_freq = min(katana_bus_frequency, MV64x60_TCLK_FREQ_MAX);
-}
-#endif
-
-#if defined(CONFIG_MV643XX_ETH)
-static void __init
-katana_fixup_eth_pdata(struct platform_device *pdev)
-{
-	struct mv643xx_eth_platform_data *eth_pd;
-	static u16 phy_addr[] = {
-		KATANA_ETH0_PHY_ADDR,
-		KATANA_ETH1_PHY_ADDR,
-		KATANA_ETH2_PHY_ADDR,
-	};
-
-	eth_pd = pdev->dev.platform_data;
-	eth_pd->force_phy_addr = 1;
-	eth_pd->phy_addr = phy_addr[pdev->id];
-	eth_pd->tx_queue_size = KATANA_ETH_TX_QUEUE_SIZE;
-	eth_pd->rx_queue_size = KATANA_ETH_RX_QUEUE_SIZE;
-}
-#endif
-
-#if defined(CONFIG_SYSFS)
-static void __init
-katana_fixup_mv64xxx_pdata(struct platform_device *pdev)
-{
-	struct mv64xxx_pdata *pdata = (struct mv64xxx_pdata *)
-		pdev->dev.platform_data;
-
-	/* Katana supports the mv64xxx hotswap register */
-	pdata->hs_reg_valid = 1;
-}
-#endif
-
-static int
-katana_platform_notify(struct device *dev)
-{
-	static struct {
-		char	*bus_id;
-		void	((*rtn)(struct platform_device *pdev));
-	} dev_map[] = {
-#if defined(CONFIG_SERIAL_MPSC)
-		{ MPSC_CTLR_NAME ".0", katana_fixup_mpsc_pdata },
-		{ MPSC_CTLR_NAME ".1", katana_fixup_mpsc_pdata },
-#endif
-#if defined(CONFIG_MV643XX_ETH)
-		{ MV643XX_ETH_NAME ".0", katana_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".1", katana_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".2", katana_fixup_eth_pdata },
-#endif
-#if defined(CONFIG_SYSFS)
-		{ MV64XXX_DEV_NAME ".0", katana_fixup_mv64xxx_pdata },
-#endif
-	};
-	struct platform_device	*pdev;
-	int	i;
-
-	if (dev && dev->bus_id)
-		for (i=0; i<ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-					BUS_ID_SIZE)) {
-				pdev = container_of(dev,
-					struct platform_device, dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-
-#ifdef CONFIG_MTD_PHYSMAP
-
-#ifndef MB
-#define MB	(1 << 20)
-#endif
-
-/*
- * MTD Layout depends on amount of soldered FLASH in system. Sizes in MB.
- *
- * FLASH Amount:	128	64	32	16
- * -------------	---	--	--	--
- * Monitor:		1	1	1	1
- * Primary Kernel:	1.5	1.5	1.5	1.5
- * Primary fs:		30	30	<end>	<end>
- * Secondary Kernel:	1.5	1.5	N/A	N/A
- * Secondary fs:	<end>	<end>	N/A	N/A
- * User: 		<overlays entire FLASH except for "Monitor" section>
- */
-static int __init
-katana_setup_mtd(void)
-{
-	u32	size;
-	int	ptbl_entries;
-	static struct mtd_partition	*ptbl;
-
-	size = katana_flash_size_0 + katana_flash_size_1;
-	if (!size)
-		return -ENOMEM;
-
-	ptbl_entries = (size >= (64*MB)) ? 6 : 4;
-
-	if ((ptbl = kcalloc(ptbl_entries, sizeof(struct mtd_partition),
-			GFP_KERNEL)) == NULL) {
-		printk(KERN_WARNING "Can't alloc MTD partition table\n");
-		return -ENOMEM;
-	}
-
-	ptbl[0].name = "Monitor";
-	ptbl[0].size = KATANA_MTD_MONITOR_SIZE;
-	ptbl[1].name = "Primary Kernel";
-	ptbl[1].offset = MTDPART_OFS_NXTBLK;
-	ptbl[1].size = 0x00180000; /* 1.5 MB */
-	ptbl[2].name = "Primary Filesystem";
-	ptbl[2].offset = MTDPART_OFS_APPEND;
-	ptbl[2].size = MTDPART_SIZ_FULL; /* Correct for 16 & 32 MB */
-	ptbl[ptbl_entries-1].name = "User FLASH";
-	ptbl[ptbl_entries-1].offset = KATANA_MTD_MONITOR_SIZE;
-	ptbl[ptbl_entries-1].size = MTDPART_SIZ_FULL;
-
-	if (size >= (64*MB)) {
-		ptbl[2].size = 30*MB;
-		ptbl[3].name = "Secondary Kernel";
-		ptbl[3].offset = MTDPART_OFS_NXTBLK;
-		ptbl[3].size = 0x00180000; /* 1.5 MB */
-		ptbl[4].name = "Secondary Filesystem";
-		ptbl[4].offset = MTDPART_OFS_APPEND;
-		ptbl[4].size = MTDPART_SIZ_FULL;
-	}
-
-	physmap_map.size = size;
-	physmap_set_partitions(ptbl, ptbl_entries);
-	return 0;
-}
-arch_initcall(katana_setup_mtd);
-#endif
-
-static void
-katana_restart(char *cmd)
-{
-	ulong	i = 10000000;
-
-	/* issue hard reset to the reset command register */
-	out_8(cpld_base + KATANA_CPLD_RST_CMD, KATANA_CPLD_RST_CMD_HR);
-
-	while (i-- > 0) ;
-	panic("restart failed\n");
-}
-
-static void
-katana_halt(void)
-{
-	u8	v;
-
-	/* Turn on blue LED to indicate its okay to remove */
-	if (katana_id == KATANA_ID_750I) {
-		u32	v;
-		u8	save_exclude;
-
-		/* Set LOO bit in cPCI HotSwap reg of hose 0 to turn on LED. */
-		save_exclude = mv64x60_pci_exclude_bridge;
-		mv64x60_pci_exclude_bridge = 0;
-		early_read_config_dword(bh.hose_a, 0, PCI_DEVFN(0, 0),
-			MV64360_PCICFG_CPCI_HOTSWAP, &v);
-		v &= 0xff;
-		v |= (1 << 19);
-		early_write_config_dword(bh.hose_a, 0, PCI_DEVFN(0, 0),
-			MV64360_PCICFG_CPCI_HOTSWAP, v);
-		mv64x60_pci_exclude_bridge = save_exclude;
-	} else if (katana_id == KATANA_ID_752I) {
-		   v = in_8(cpld_base + HSL_PLD_BASE + HSL_PLD_HOT_SWAP_OFF);
-		   v |= HSL_PLD_HOT_SWAP_LED_BIT;
-		   out_8(cpld_base + HSL_PLD_BASE + HSL_PLD_HOT_SWAP_OFF, v);
-	}
-
-	while (1) ;
-	/* NOTREACHED */
-}
-
-static void
-katana_power_off(void)
-{
-	katana_halt();
-	/* NOTREACHED */
-}
-
-static int
-katana_show_cpuinfo(struct seq_file *m)
-{
-	char	*s;
-
-	seq_printf(m, "cpu freq\t: %dMHz\n",
-		(katana_get_cpu_freq() + 500000) / 1000000);
-	seq_printf(m, "bus freq\t: %ldMHz\n",
-		((long)katana_bus_frequency + 500000) / 1000000);
-	seq_printf(m, "vendor\t\t: Artesyn Communication Products, LLC\n");
-
-	seq_printf(m, "board\t\t: ");
-	switch (katana_id) {
-	case KATANA_ID_3750:
-		seq_printf(m, "Katana 3750");
-		break;
-
-	case KATANA_ID_750I:
-		seq_printf(m, "Katana 750i");
-		break;
-
-	case KATANA_ID_752I:
-		seq_printf(m, "Katana 752i");
-		break;
-
-	default:
-		seq_printf(m, "Unknown");
-		break;
-	}
-	seq_printf(m, " (product id: 0x%x)\n",
-		   in_8(cpld_base + KATANA_CPLD_PRODUCT_ID));
-
-	seq_printf(m, "pci mode\t: %sMonarch\n",
-		katana_is_monarch()? "" : "Non-");
-	seq_printf(m, "hardware rev\t: 0x%x\n",
-		   in_8(cpld_base+KATANA_CPLD_HARDWARE_VER));
-	seq_printf(m, "pld rev\t\t: 0x%x\n",
-		   in_8(cpld_base + KATANA_CPLD_PLD_VER));
-
-	switch(bh.type) {
-	case MV64x60_TYPE_GT64260A:
-		s = "gt64260a";
-		break;
-	case MV64x60_TYPE_GT64260B:
-		s = "gt64260b";
-		break;
-	case MV64x60_TYPE_MV64360:
-		s = "mv64360";
-		break;
-	case MV64x60_TYPE_MV64460:
-		s = "mv64460";
-		break;
-	default:
-		s = "Unknown";
-	}
-	seq_printf(m, "bridge type\t: %s\n", s);
-	seq_printf(m, "bridge rev\t: 0x%x\n", bh.rev);
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-	seq_printf(m, "coherency\t: %s\n", "off");
-#else
-	seq_printf(m, "coherency\t: %s\n", "on");
-#endif
-
-	return 0;
-}
-
-static void __init
-katana_calibrate_decr(void)
-{
-	u32 freq;
-
-	freq = katana_bus_frequency / 4;
-
-	printk(KERN_INFO "time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       (long)freq / 1000000, (long)freq % 1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
-
-/*
- * The katana supports both uImage and zImage.  If uImage, get the mem size
- * from the bd info.  If zImage, the bootwrapper adds a BI_MEMSIZE entry in
- * the bi_rec data which is sucked out and put into boot_mem_size by
- * parse_bootinfo().  MMU_init() will then use the boot_mem_size for the mem
- * size and not call this routine.  The only way this will fail is when a uImage
- * is used but the fw doesn't pass in a valid bi_memsize.  This should never
- * happen, though.
- */
-unsigned long __init
-katana_find_end_of_memory(void)
-{
-	bd_t *bdp = (bd_t *)__res;
-	return bdp->bi_memsize;
-}
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
-static void __init
-katana_map_io(void)
-{
-	io_block_mapping(0xf8100000, 0xf8100000, 0x00020000, _PAGE_IO);
-}
-#endif
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* ASSUMPTION:  If both r3 (bd_t pointer) and r6 (cmdline pointer)
-	 * are non-zero, then we should use the board info from the bd_t
-	 * structure and the cmdline pointed to by r6 instead of the
-	 * information from birecs, if any.  Otherwise, use the information
-	 * from birecs as discovered by the preceding call to
-	 * parse_bootinfo().  This rule should work with both PPCBoot, which
-	 * uses a bd_t board info structure, and the kernel boot wrapper,
-	 * which uses birecs.
-	 */
-	if (r3 && r6) {
-		/* copy board info structure */
-		memcpy((void *)__res, (void *)(r3+KERNELBASE), sizeof(bd_t));
-		/* copy command line */
-		*(char *)(r7+KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6+KERNELBASE));
-	}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	isa_mem_base = 0;
-
-	ppc_md.setup_arch = katana_setup_arch;
-	ppc_md.pcibios_fixup_resources = katana_fixup_resources;
-	ppc_md.show_cpuinfo = katana_show_cpuinfo;
-	ppc_md.init_IRQ = mv64360_init_irq;
-	ppc_md.get_irq = mv64360_get_irq;
-	ppc_md.restart = katana_restart;
-	ppc_md.power_off = katana_power_off;
-	ppc_md.halt = katana_halt;
-	ppc_md.find_end_of_memory = katana_find_end_of_memory;
-	ppc_md.calibrate_decr = katana_calibrate_decr;
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	ppc_md.setup_io_mappings = katana_map_io;
-	ppc_md.progress = mv64x60_mpsc_progress;
-	mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
-#endif
-
-#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH)
-	platform_notify = katana_platform_notify;
-#endif
-}
diff --git a/arch/ppc/platforms/katana.h b/arch/ppc/platforms/katana.h
deleted file mode 100644
index 0a9b036526b1..000000000000
--- a/arch/ppc/platforms/katana.h
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Definitions for Artesyn Katana750i/3750 board.
- *
- * Author: Tim Montgomery <timm@artesyncp.com>
- * Maintained by: Mark A. Greer <mgreer@mvista.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/*
- * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- * We'll only use one PCI MEM window on each PCI bus.
- *
- * This is the CPU physical memory map (windows must be at least 64 KB and start
- * on a boundary that is a multiple of the window size):
- *
- *    0xff800000-0xffffffff      - Boot window
- *    0xf8400000-0xf843ffff      - Internal SRAM
- *    0xf8200000-0xf83fffff      - CPLD
- *    0xf8100000-0xf810ffff      - MV64360 Registers (CONFIG_MV64X60_NEW_BASE)
- *    0xf8000000-0xf80fffff      - Socketed FLASH
- *    0xe0000000-0xefffffff      - Soldered FLASH
- *    0xc0000000-0xc3ffffff      - PCI I/O (second hose)
- *    0x80000000-0xbfffffff      - PCI MEM (second hose)
- */
-
-#ifndef __PPC_PLATFORMS_KATANA_H
-#define __PPC_PLATFORMS_KATANA_H
-
-/* CPU Physical Memory Map setup. */
-#define KATANA_BOOT_WINDOW_BASE			0xff800000
-#define KATANA_BOOT_WINDOW_SIZE			0x00800000 /* 8 MB */
-#define KATANA_INTERNAL_SRAM_BASE		0xf8400000
-#define KATANA_CPLD_BASE			0xf8200000
-#define KATANA_CPLD_SIZE			0x00200000 /* 2 MB */
-#define KATANA_SOCKET_BASE			0xf8000000
-#define KATANA_SOCKETED_FLASH_SIZE		0x00100000 /* 1 MB */
-#define KATANA_SOLDERED_FLASH_BASE		0xe0000000
-#define KATANA_SOLDERED_FLASH_SIZE		0x10000000 /* 256 MB */
-
-#define KATANA_PCI1_MEM_START_PROC_ADDR         0x80000000
-#define KATANA_PCI1_MEM_START_PCI_HI_ADDR       0x00000000
-#define KATANA_PCI1_MEM_START_PCI_LO_ADDR       0x80000000
-#define KATANA_PCI1_MEM_SIZE                    0x40000000 /* 1 GB */
-#define KATANA_PCI1_IO_START_PROC_ADDR          0xc0000000
-#define KATANA_PCI1_IO_START_PCI_ADDR           0x00000000
-#define KATANA_PCI1_IO_SIZE                     0x04000000 /* 64 MB */
-
-/* Board-specific IRQ info */
-#define  KATANA_PCI_INTA_IRQ_3750		(64+8)
-#define  KATANA_PCI_INTB_IRQ_3750		(64+9)
-#define  KATANA_PCI_INTC_IRQ_3750		(64+10)
-
-#define  KATANA_PCI_INTA_IRQ_750i		(64+8)
-#define  KATANA_PCI_INTB_IRQ_750i		(64+9)
-#define  KATANA_PCI_INTC_IRQ_750i		(64+10)
-#define  KATANA_PCI_INTD_IRQ_750i		(64+14)
-
-#define KATANA_CPLD_RST_EVENT			0x00000000
-#define KATANA_CPLD_RST_CMD			0x00001000
-#define KATANA_CPLD_PCI_ERR_INT_EN		0x00002000
-#define KATANA_CPLD_PCI_ERR_INT_PEND		0x00003000
-#define KATANA_CPLD_PRODUCT_ID			0x00004000
-#define KATANA_CPLD_EREADY			0x00005000
-
-#define KATANA_CPLD_HARDWARE_VER		0x00007000
-#define KATANA_CPLD_PLD_VER			0x00008000
-#define KATANA_CPLD_BD_CFG_0			0x00009000
-#define KATANA_CPLD_BD_CFG_1			0x0000a000
-#define KATANA_CPLD_BD_CFG_3			0x0000c000
-#define KATANA_CPLD_LED				0x0000d000
-#define KATANA_CPLD_RESET_OUT			0x0000e000
-
-#define KATANA_CPLD_RST_EVENT_INITACT		0x80
-#define KATANA_CPLD_RST_EVENT_SW		0x40
-#define KATANA_CPLD_RST_EVENT_WD		0x20
-#define KATANA_CPLD_RST_EVENT_COPS		0x10
-#define KATANA_CPLD_RST_EVENT_COPH		0x08
-#define KATANA_CPLD_RST_EVENT_CPCI		0x02
-#define KATANA_CPLD_RST_EVENT_FP		0x01
-
-#define KATANA_CPLD_RST_CMD_SCL			0x80
-#define KATANA_CPLD_RST_CMD_SDA			0x40
-#define KATANA_CPLD_RST_CMD_I2C			0x10
-#define KATANA_CPLD_RST_CMD_FR			0x08
-#define KATANA_CPLD_RST_CMD_SR			0x04
-#define KATANA_CPLD_RST_CMD_HR			0x01
-
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_MASK	0xc0
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_200		0x00
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_166		0x80
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_133		0xc0
-#define KATANA_CPLD_BD_CFG_0_SYSCLK_100		0x40
-
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_MASK	0x03
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_16MB	0x00
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_32MB	0x01
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_64MB	0x02
-#define KATANA_CPLD_BD_CFG_1_FL_BANK_128MB	0x03
-
-#define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_MASK	0x04
-#define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_ONE	0x00
-#define KATANA_CPLD_BD_CFG_1_FL_NUM_BANKS_TWO	0x04
-
-#define KATANA_CPLD_BD_CFG_3_MONARCH		0x04
-
-#define KATANA_CPLD_RESET_OUT_PORTSEL		0x80
-#define KATANA_CPLD_RESET_OUT_WD		0x20
-#define KATANA_CPLD_RESET_OUT_COPH		0x08
-#define KATANA_CPLD_RESET_OUT_PCI_RST_PCI	0x02
-#define KATANA_CPLD_RESET_OUT_PCI_RST_FP	0x01
-
-#define KATANA_MBOX_RESET_REQUEST		0xC83A
-#define KATANA_MBOX_RESET_ACK			0xE430
-#define KATANA_MBOX_RESET_DONE			0x32E5
-
-#define HSL_PLD_BASE				0x00010000
-#define HSL_PLD_J4SGA_REG_OFF			0
-#define HSL_PLD_J4GA_REG_OFF			1
-#define HSL_PLD_J2GA_REG_OFF			2
-#define HSL_PLD_HOT_SWAP_OFF			6
-#define HSL_PLD_HOT_SWAP_LED_BIT		0x1
-#define GA_MASK					0x1f
-#define HSL_PLD_SIZE				0x1000
-#define K3750_GPP_GEO_ADDR_PINS			0xf8000000
-#define K3750_GPP_GEO_ADDR_SHIFT		27
-
-#define K3750_GPP_EVENT_PROC_0			(1 << 21)
-#define K3750_GPP_EVENT_PROC_1_2		(1 << 2)
-
-#define PCI_VENDOR_ID_ARTESYN			0x1223
-#define PCI_DEVICE_ID_KATANA_3750_PROC0		0x0041
-#define PCI_DEVICE_ID_KATANA_3750_PROC1		0x0042
-#define PCI_DEVICE_ID_KATANA_3750_PROC2		0x0043
-
-#define COPROC_MEM_FUNCTION			0
-#define COPROC_MEM_BAR				0
-#define COPROC_REGS_FUNCTION			0
-#define COPROC_REGS_BAR				4
-#define COPROC_FLASH_FUNCTION			2
-#define COPROC_FLASH_BAR			4
-
-#define KATANA_IPMB_LOCAL_I2C_ADDR		0x08
-
-#define	KATANA_DEFAULT_BAUD			9600
-#define	KATANA_MPSC_CLK_SRC			8	  /* TCLK */
-
-#define	KATANA_MTD_MONITOR_SIZE			(1 << 20) /* 1 MB */
-
-#define	KATANA_ETH0_PHY_ADDR			12
-#define	KATANA_ETH1_PHY_ADDR			11
-#define	KATANA_ETH2_PHY_ADDR			4
-
-#define KATANA_PRODUCT_ID_3750			0x01
-#define KATANA_PRODUCT_ID_750i			0x02
-#define KATANA_PRODUCT_ID_752i			0x04
-
-#define KATANA_ETH_TX_QUEUE_SIZE		800
-#define KATANA_ETH_RX_QUEUE_SIZE		400
-
-#define	KATANA_ETH_PORT_CONFIG_VALUE			\
-	ETH_UNICAST_NORMAL_MODE			|	\
-	ETH_DEFAULT_RX_QUEUE_0			|	\
-	ETH_DEFAULT_RX_ARP_QUEUE_0		|	\
-	ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP		|	\
-	ETH_RECEIVE_BC_IF_IP			|	\
-	ETH_RECEIVE_BC_IF_ARP			|	\
-	ETH_CAPTURE_TCP_FRAMES_DIS		|	\
-	ETH_CAPTURE_UDP_FRAMES_DIS		|	\
-	ETH_DEFAULT_RX_TCP_QUEUE_0		|	\
-	ETH_DEFAULT_RX_UDP_QUEUE_0		|	\
-	ETH_DEFAULT_RX_BPDU_QUEUE_0
-
-#define	KATANA_ETH_PORT_CONFIG_EXTEND_VALUE		\
-	ETH_SPAN_BPDU_PACKETS_AS_NORMAL		|	\
-	ETH_PARTITION_DISABLE
-
-#define	GT_ETH_IPG_INT_RX(value)			\
-	((value & 0x3fff) << 8)
-
-#define	KATANA_ETH_PORT_SDMA_CONFIG_VALUE		\
-	ETH_RX_BURST_SIZE_4_64BIT		|	\
-	GT_ETH_IPG_INT_RX(0)			|	\
-	ETH_TX_BURST_SIZE_4_64BIT
-
-#define	KATANA_ETH_PORT_SERIAL_CONTROL_VALUE		\
-	ETH_FORCE_LINK_PASS			|	\
-	ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
-	ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
-	ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
-	ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
-	ETH_FORCE_BP_MODE_NO_JAM		|	\
-	BIT9					|	\
-	ETH_DO_NOT_FORCE_LINK_FAIL		|	\
-	ETH_RETRANSMIT_16_ATTEMPTS		|	\
-	ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
-	ETH_DTE_ADV_0				|	\
-	ETH_DISABLE_AUTO_NEG_BYPASS		|	\
-	ETH_AUTO_NEG_NO_CHANGE			|	\
-	ETH_MAX_RX_PACKET_9700BYTE		|	\
-	ETH_CLR_EXT_LOOPBACK			|	\
-	ETH_SET_FULL_DUPLEX_MODE		|	\
-	ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
-
-#ifndef __ASSEMBLY__
-
-typedef enum {
-	KATANA_ID_3750,
-	KATANA_ID_750I,
-	KATANA_ID_752I,
-	KATANA_ID_MAX
-} katana_id_t;
-
-#endif
-
-static inline u32
-katana_bus_freq(void __iomem *cpld_base)
-{
-	u8 bd_cfg_0;
-
-	bd_cfg_0 = in_8(cpld_base + KATANA_CPLD_BD_CFG_0);
-
-	switch (bd_cfg_0 & KATANA_CPLD_BD_CFG_0_SYSCLK_MASK) {
-	case KATANA_CPLD_BD_CFG_0_SYSCLK_200:
-		return 200000000;
-		break;
-
-	case KATANA_CPLD_BD_CFG_0_SYSCLK_166:
-		return 166666666;
-		break;
-
-	case KATANA_CPLD_BD_CFG_0_SYSCLK_133:
-		return 133333333;
-		break;
-
-	case KATANA_CPLD_BD_CFG_0_SYSCLK_100:
-		return 100000000;
-		break;
-
-	default:
-		return 133333333;
-		break;
-	}
-}
-
-#endif	/* __PPC_PLATFORMS_KATANA_H */
diff --git a/arch/ppc/platforms/lantec.h b/arch/ppc/platforms/lantec.h
deleted file mode 100644
index 5e5eb6d0f6aa..000000000000
--- a/arch/ppc/platforms/lantec.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * LANTEC board specific definitions
- *
- * Copyright (c) 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_LANTEC_H
-#define __MACH_LANTEC_H
-
-
-#include <asm/ppcboot.h>
-
-#define	IMAP_ADDR	0xFFF00000	/* physical base address of IMMR area	*/
-#define IMAP_SIZE	(64 * 1024)	/* mapped size of IMMR area		*/
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_LANTEC_H */
diff --git a/arch/ppc/platforms/lite5200.c b/arch/ppc/platforms/lite5200.c
deleted file mode 100644
index b9e9db63f65b..000000000000
--- a/arch/ppc/platforms/lite5200.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * Platform support file for the Freescale LITE5200 based on MPC52xx.
- * A maximum of this file should be moved to syslib/mpc52xx_?????
- * so that new platform based on MPC52xx need a minimal platform file
- * ( avoid code duplication )
- *
- * 
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Based on the 2.4 code written by Kent Borg,
- * Dale Farnsworth <dale.farnsworth@mvista.com> and
- * Wolfgang Denk <wd@denx.de>
- * 
- * Copyright 2004-2005 Sylvain Munaut <tnt@246tNt.com>
- * Copyright 2003 Motorola Inc.
- * Copyright 2003 MontaVista Software Inc.
- * Copyright 2003 DENX Software Engineering (wd@denx.de)
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/initrd.h>
-#include <linux/seq_file.h>
-#include <linux/kdev_t.h>
-#include <linux/root_dev.h>
-#include <linux/console.h>
-#include <linux/module.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mpc52xx.h>
-#include <asm/ppc_sys.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-
-
-extern int powersave_nap;
-
-/* Board data given by U-Boot */
-bd_t __res;
-EXPORT_SYMBOL(__res);	/* For modules */
-
-
-/* ======================================================================== */
-/* Platform specific code                                                   */
-/* ======================================================================== */
-
-/* Supported PSC function in "preference" order */
-struct mpc52xx_psc_func mpc52xx_psc_functions[] = {
-		{       .id     = 0,
-			.func   = "uart",
-		},
-		{       .id     = -1,   /* End entry */
-			.func   = NULL,
-		}
-	};
-
-
-static int
-lite5200_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "machine\t\t: Freescale LITE5200\n");
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-#ifdef CONFIG_LITE5200B
-static int
-lite5200_map_irq(struct pci_dev *dev, unsigned char idsel,
-		    unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *      PCI IDSEL/INTPIN->INTLINE
-	 *        A             B             C             D
-	 */
-	{
-		{MPC52xx_IRQ0, MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3},
-		{MPC52xx_IRQ1, MPC52xx_IRQ2, MPC52xx_IRQ3, MPC52xx_IRQ0},
-	};
-
-	const long min_idsel = 24, max_idsel = 25, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-#else /* Original Lite */
-static int
-lite5200_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	return (pin == 1) && (idsel==24) ? MPC52xx_IRQ0 : -1;
-}
-#endif
-#endif
-
-static void __init
-lite5200_setup_cpu(void)
-{
-	struct mpc52xx_gpio __iomem *gpio;
-	struct mpc52xx_intr __iomem *intr;
-
-	u32 port_config;
-	u32 intr_ctrl;
-
-	/* Map zones */
-	gpio = ioremap(MPC52xx_PA(MPC52xx_GPIO_OFFSET), MPC52xx_GPIO_SIZE);
-	intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
-
-	if (!gpio || !intr) {
-		printk(KERN_ERR __FILE__ ": "
-			"Error while mapping GPIO/INTR during "
-			"lite5200_setup_cpu\n");
-		goto unmap_regs;
-	}
-
-	/* Get port mux config */
-	port_config = in_be32(&gpio->port_config);
-
-	/* 48Mhz internal, pin is GPIO */
-	port_config &= ~0x00800000;
-
-	/* USB port */
-	port_config &= ~0x00007000;	/* Differential mode - USB1 only */
-	port_config |=  0x00001000;
-
-	/* ATA CS is on csb_4/5 */
-	port_config &= ~0x03000000;
-	port_config |=  0x01000000;
-
-	/* Commit port config */
-	out_be32(&gpio->port_config, port_config);
-
-	/* IRQ[0-3] setup */
-	intr_ctrl = in_be32(&intr->ctrl);
-	intr_ctrl &= ~0x00ff0000;
-#ifdef CONFIG_LITE5200B
-	/* IRQ[0-3] Level Active Low */
-	intr_ctrl |=  0x00ff0000;
-#else
-	/* IRQ0 Level Active Low
-	 * IRQ[1-3] Level Active High */
- 	intr_ctrl |=  0x00c00000;
-#endif
-	out_be32(&intr->ctrl, intr_ctrl);
-
-	/* Unmap reg zone */
-unmap_regs:
-	if (gpio) iounmap(gpio);
-	if (intr) iounmap(intr);
-}
-
-static void __init
-lite5200_setup_arch(void)
-{
-	/* CPU & Port mux setup */
-	mpc52xx_setup_cpu();	/* Generic */
-	lite5200_setup_cpu();	/* Platform specific */
-
-#ifdef CONFIG_PCI
-	/* PCI Bridge setup */
-	mpc52xx_find_bridges();
-#endif
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-              unsigned long r6, unsigned long r7)
-{
-	/* Generic MPC52xx platform initialization */
-	/* TODO Create one and move a max of stuff in it.
-	   Put this init in the syslib */
-
-	struct bi_record *bootinfo = find_bootinfo();
-
-	if (bootinfo)
-		parse_bootinfo(bootinfo);
-	else {
-		/* Load the bd_t board info structure */
-		if (r3)
-			memcpy((void*)&__res,(void*)(r3+KERNELBASE),
-					sizeof(bd_t));
-
-#ifdef CONFIG_BLK_DEV_INITRD
-		/* Load the initrd */
-		if (r4) {
-			initrd_start = r4 + KERNELBASE;
-			initrd_end = r5 + KERNELBASE;
-		}
-#endif
-
-		/* Load the command line */
-		if (r6) {
-			*(char *)(r7+KERNELBASE) = 0;
-			strcpy(cmd_line, (char *)(r6+KERNELBASE));
-		}
-	}
-
-	/* PPC Sys identification */
-	identify_ppc_sys_by_id(mfspr(SPRN_SVR));
-
-	/* BAT setup */
-	mpc52xx_set_bat();
-
-	/* No ISA bus by default */
-#ifdef CONFIG_PCI
-	isa_io_base		= 0;
-	isa_mem_base		= 0;
-#endif
-
-	/* Powersave */
-	/* This is provided as an example on how to do it. But you
-	   need to be aware that NAP disable bus snoop and that may
-	   be required for some devices to work properly, like USB ... */
-	/* powersave_nap = 1; */
-
-
-	/* Setup the ppc_md struct */
-	ppc_md.setup_arch	= lite5200_setup_arch;
-	ppc_md.show_cpuinfo	= lite5200_show_cpuinfo;
-	ppc_md.show_percpuinfo	= NULL;
-	ppc_md.init_IRQ		= mpc52xx_init_irq;
-	ppc_md.get_irq		= mpc52xx_get_irq;
-
-#ifdef CONFIG_PCI
-	ppc_md.pci_map_irq	= lite5200_map_irq;
-#endif
-
-	ppc_md.find_end_of_memory = mpc52xx_find_end_of_memory;
-	ppc_md.setup_io_mappings  = mpc52xx_map_io;
-
-	ppc_md.restart		= mpc52xx_restart;
-	ppc_md.power_off	= mpc52xx_power_off;
-	ppc_md.halt		= mpc52xx_halt;
-
-		/* No time keeper on the LITE5200 */
-	ppc_md.time_init	= NULL;
-	ppc_md.get_rtc_time	= NULL;
-	ppc_md.set_rtc_time	= NULL;
-
-	ppc_md.calibrate_decr	= mpc52xx_calibrate_decr;
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress		= mpc52xx_progress;
-#endif
-}
-
diff --git a/arch/ppc/platforms/lite5200.h b/arch/ppc/platforms/lite5200.h
deleted file mode 100644
index 852a18e24d0b..000000000000
--- a/arch/ppc/platforms/lite5200.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * Definitions for Freescale LITE5200 : MPC52xx Standard Development
- * Platform board support
- * 
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- * 
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __PLATFORMS_LITE5200_H__
-#define __PLATFORMS_LITE5200_H__
-
-/* Serial port used for low-level debug */
-#define MPC52xx_PF_CONSOLE_PORT 1	/* PSC1 */
-
-
-#endif /* __PLATFORMS_LITE5200_H__ */
diff --git a/arch/ppc/platforms/lopec.c b/arch/ppc/platforms/lopec.c
deleted file mode 100644
index 1e3aa6e9b6c7..000000000000
--- a/arch/ppc/platforms/lopec.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Setup routines for the Motorola LoPEC.
- *
- * Author: Dan Cox
- * Maintainer: Tom Rini <trini@kernel.crashing.org>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/pci_ids.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/root_dev.h>
-#include <linux/pci.h>
-
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/io.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/mpc10x.h>
-#include <asm/hw_irq.h>
-#include <asm/prep_nvram.h>
-#include <asm/kgdb.h>
-
-/*
- * Define all of the IRQ senses and polarities.  Taken from the
- * LoPEC Programmer's Reference Guide.
- */
-static u_char lopec_openpic_initsenses[16] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 4 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 5 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 6 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 7 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 8 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 9 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 10 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 11 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* IRQ 12 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE),	/* IRQ 13 */
-	(IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE),	/* IRQ 14 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE)	/* IRQ 15 */
-};
-
-static inline int __init
-lopec_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	int irq;
-	static char pci_irq_table[][4] = {
-		{16, 0, 0, 0}, /* ID 11 - Winbond */
-		{22, 0, 0, 0}, /* ID 12 - SCSI */
-		{0, 0, 0, 0}, /* ID 13 - nothing */
-		{17, 0, 0, 0}, /* ID 14 - 82559 Ethernet */
-		{27, 0, 0, 0}, /* ID 15 - USB */
-		{23, 0, 0, 0}, /* ID 16 - PMC slot 1 */
-		{24, 0, 0, 0}, /* ID 17 - PMC slot 2 */
-		{25, 0, 0, 0}, /* ID 18 - PCI slot */
-		{0, 0, 0, 0}, /* ID 19 - nothing */
-		{0, 0, 0, 0}, /* ID 20 - nothing */
-		{0, 0, 0, 0}, /* ID 21 - nothing */
-		{0, 0, 0, 0}, /* ID 22 - nothing */
-		{0, 0, 0, 0}, /* ID 23 - nothing */
-		{0, 0, 0, 0}, /* ID 24 - PMC slot 1b */
-		{0, 0, 0, 0}, /* ID 25 - nothing */
-		{0, 0, 0, 0}  /* ID 26 - PMC Slot 2b */
-	};
-	const long min_idsel = 11, max_idsel = 26, irqs_per_slot = 4;
-
-	irq = PCI_IRQ_TABLE_LOOKUP;
-	if (!irq)
-		return 0;
-
-	return irq;
-}
-
-static void __init
-lopec_setup_winbond_83553(struct pci_controller *hose)
-{
-	int devfn;
-
-	devfn = PCI_DEVFN(11,0);
-
-	/* IDE interrupt routing (primary 14, secondary 15) */
-	early_write_config_byte(hose, 0, devfn, 0x43, 0xef);
-	/* PCI interrupt routing */
-	early_write_config_word(hose, 0, devfn, 0x44, 0x0000);
-
-	/* ISA-PCI address decoder */
-	early_write_config_byte(hose, 0, devfn, 0x48, 0xf0);
-
-	/* RTC, kb, not used in PPC */
-	early_write_config_byte(hose, 0, devfn, 0x4d, 0x00);
-	early_write_config_byte(hose, 0, devfn, 0x4e, 0x04);
-	devfn = PCI_DEVFN(11, 1);
-	early_write_config_byte(hose, 0, devfn, 0x09, 0x8f);
-	early_write_config_dword(hose, 0, devfn, 0x40, 0x00ff0011);
-}
-
-static void __init
-lopec_find_bridges(void)
-{
-	struct pci_controller *hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	if (mpc10x_bridge_init(hose, MPC10X_MEM_MAP_B, MPC10X_MEM_MAP_B,
-				MPC10X_MAPB_EUMB_BASE) == 0) {
-
-		hose->mem_resources[0].end = 0xffffffff;
-		lopec_setup_winbond_83553(hose);
-		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-		ppc_md.pci_swizzle = common_swizzle;
-		ppc_md.pci_map_irq = lopec_map_irq;
-	}
-}
-
-static int
-lopec_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "machine\t\t: Motorola LoPEC\n");
-	return 0;
-}
-
-static void
-lopec_restart(char *cmd)
-{
-#define LOPEC_SYSSTAT1 0xffe00000
-	/* force a hard reset, if possible */
-	unsigned char reg = *((unsigned char *) LOPEC_SYSSTAT1);
-	reg |= 0x80;
-	*((unsigned char *) LOPEC_SYSSTAT1) = reg;
-
-	local_irq_disable();
-	while(1);
-#undef LOPEC_SYSSTAT1
-}
-
-static void
-lopec_halt(void)
-{
-	local_irq_disable();
-	while(1);
-}
-
-static void
-lopec_power_off(void)
-{
-	lopec_halt();
-}
-
-static void __init
-lopec_init_IRQ(void)
-{
-	int i;
-
-	/*
-	 * Provide the open_pic code with the correct table of interrupts.
-	 */
-	OpenPIC_InitSenses = lopec_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(lopec_openpic_initsenses);
-
-	mpc10x_set_openpic();
-
-	/* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
-	openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
-			&i8259_irq);
-
-	/*
-	 * The EPIC allows for a read in the range of 0xFEF00000 ->
-	 * 0xFEFFFFFF to generate a PCI interrupt-acknowledge transaction.
-	 */
-	i8259_init(0xfef00000, 0);
-}
-
-static int __init
-lopec_request_io(void)
-{
-	outb(0x00, 0x4d0);
-	outb(0xc0, 0x4d1);
-
-	request_region(0x00, 0x20, "dma1");
-	request_region(0x20, 0x20, "pic1");
-	request_region(0x40, 0x20, "timer");
-	request_region(0x80, 0x10, "dma page reg");
-	request_region(0xa0, 0x20, "pic2");
-	request_region(0xc0, 0x20, "dma2");
-
-	return 0;
-}
-
-device_initcall(lopec_request_io);
-
-static void __init
-lopec_map_io(void)
-{
-	io_block_mapping(0xf0000000, 0xf0000000, 0x10000000, _PAGE_IO);
-	io_block_mapping(0xb0000000, 0xb0000000, 0x10000000, _PAGE_IO);
-}
-
-/*
- * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1.
- */
-static __inline__ void
-lopec_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf8000ffe);
-	mtspr(SPRN_DBAT1L, 0xf800002a);
-	mb();
-}
-
-TODC_ALLOC();
-
-static void __init
-lopec_setup_arch(void)
-{
-
-	TODC_INIT(TODC_TYPE_MK48T37, 0, 0,
-		  ioremap(0xffe80000, 0x8000), 8);
-
-	loops_per_jiffy = 100000000/HZ;
-
-	lopec_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#elif defined(CONFIG_ROOT_NFS)
-        	ROOT_DEV = Root_NFS;
-#elif defined(CONFIG_BLK_DEV_IDEDISK)
-	        ROOT_DEV = Root_HDA1;
-#else
-        	ROOT_DEV = Root_SDA1;
-#endif
-
-#ifdef CONFIG_PPCBUG_NVRAM
-	/* Read in NVRAM data */
-	init_prep_nvram();
-
-	/* if no bootargs, look in NVRAM */
-	if ( cmd_line[0] == '\0' ) {
-		char *bootargs;
-		 bootargs = prep_nvram_get_var("bootargs");
-		 if (bootargs != NULL) {
-			 strcpy(cmd_line, bootargs);
-			 /* again.. */
-			 strcpy(boot_command_line, cmd_line);
-		}
-	}
-#endif
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-	lopec_set_bat();
-
-	isa_io_base = MPC10X_MAPB_ISA_IO_BASE;
-	isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE;
-	pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-	ppc_do_canonicalize_irqs = 1;
-
-	ppc_md.setup_arch = lopec_setup_arch;
-	ppc_md.show_cpuinfo = lopec_show_cpuinfo;
-	ppc_md.init_IRQ = lopec_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.restart = lopec_restart;
-	ppc_md.power_off = lopec_power_off;
-	ppc_md.halt = lopec_halt;
-
-	ppc_md.setup_io_mappings = lopec_map_io;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif
-}
diff --git a/arch/ppc/platforms/lopec.h b/arch/ppc/platforms/lopec.h
deleted file mode 100644
index d597b6878693..000000000000
--- a/arch/ppc/platforms/lopec.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/ppc/platforms/lopec.h
- *
- * Definitions for Motorola LoPEC board.
- *
- * Author: Dan Cox
- *         danc@mvista.com (or, alternately, source@mvista.com)
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __H_LOPEC_SERIAL
-#define __H_LOPEC_SERIAL
-
-#define RS_TABLE_SIZE 3
-
-#define BASE_BAUD (1843200 / 16)
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
-#endif
-
-#define SERIAL_PORT_DFNS \
-         { 0, BASE_BAUD, 0xffe10000, 29, STD_COM_FLAGS, \
-           iomem_base: (u8 *) 0xffe10000, \
-           io_type: SERIAL_IO_MEM }, \
-         { 0, BASE_BAUD, 0xffe11000, 20, STD_COM_FLAGS, \
-           iomem_base: (u8 *) 0xffe11000, \
-           io_type: SERIAL_IO_MEM }, \
-         { 0, BASE_BAUD, 0xffe12000, 21, STD_COM_FLAGS, \
-           iomem_base: (u8 *) 0xffe12000, \
-           io_type: SERIAL_IO_MEM }
-
-#endif
diff --git a/arch/ppc/platforms/lwmon.h b/arch/ppc/platforms/lwmon.h
deleted file mode 100644
index e63f3b07a5db..000000000000
--- a/arch/ppc/platforms/lwmon.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Liebherr LWMON board specific definitions
- *
- * Copyright (c) 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_LWMON_H
-#define __MACH_LWMON_H
-
-
-#include <asm/ppcboot.h>
-
-#define	IMAP_ADDR	0xFFF00000	/* physical base address of IMMR area	*/
-#define IMAP_SIZE	(64 * 1024)	/* mapped size of IMMR area		*/
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define PCMCIA_MEM_SIZE		( 64 << 20 )
-
-#define	MAX_HWIFS	1	/* overwrite default in include/asm-ppc/ide.h	*/
-
-/*
- * Definitions for IDE0 Interface
- */
-#define IDE0_BASE_OFFSET		0
-#define IDE0_DATA_REG_OFFSET		(PCMCIA_MEM_SIZE + 0x320)
-#define IDE0_ERROR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 1)
-#define IDE0_NSECTOR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 2)
-#define IDE0_SECTOR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 3)
-#define IDE0_LCYL_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 4)
-#define IDE0_HCYL_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 5)
-#define IDE0_SELECT_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 6)
-#define IDE0_STATUS_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 7)
-#define IDE0_CONTROL_REG_OFFSET		0x0106
-#define IDE0_IRQ_REG_OFFSET		0x000A	/* not used			*/
-
-#define	IDE0_INTERRUPT			13
-
-/*
- * Definitions for I2C devices
- */
-#define I2C_ADDR_AUDIO		0x28	/* Audio volume control			*/
-#define I2C_ADDR_SYSMON		0x2E	/* LM87 System Monitor			*/
-#define I2C_ADDR_RTC		0x51	/* PCF8563 RTC				*/
-#define I2C_ADDR_POWER_A	0x52	/* PCMCIA/USB power switch, channel A	*/
-#define I2C_ADDR_POWER_B	0x53	/* PCMCIA/USB power switch, channel B	*/
-#define I2C_ADDR_KEYBD		0x56	/* PIC LWE keyboard			*/
-#define I2C_ADDR_PICIO		0x57	/* PIC IO Expander			*/
-#define I2C_ADDR_EEPROM		0x58	/* EEPROM AT24C164			*/
-
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_LWMON_H */
diff --git a/arch/ppc/platforms/mbx.h b/arch/ppc/platforms/mbx.h
deleted file mode 100644
index 1cf36fa3592d..000000000000
--- a/arch/ppc/platforms/mbx.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Motorola MBX boards.  This was originally created for the
- * MBX860, and probably needs revisions for other boards (like the 821).
- * When this file gets out of control, we can split it up into more
- * meaningful pieces.
- *
- * Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
- */
-#ifdef __KERNEL__
-#ifndef __MACH_MBX_DEFS
-#define __MACH_MBX_DEFS
-
-#ifndef __ASSEMBLY__
-/* A Board Information structure that is given to a program when
- * EPPC-Bug starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_tag;		/* Should be 0x42444944 "BDID" */
-	unsigned int	bi_size;	/* Size of this structure */
-	unsigned int	bi_revision;	/* revision of this structure */
-	unsigned int	bi_bdate;	/* EPPCbug date, i.e. 0x11061997 */
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
-	unsigned int	bi_clun;	/* Boot device controller */
-	unsigned int	bi_dlun;	/* Boot device logical dev */
-
-	/* These fields are not part of the board information structure
-	 * provided by the boot rom.  They are filled in by embed_config.c
-	 * so we have the information consistent with other platforms.
-	 */
-	unsigned char	bi_enetaddr[6];
-	unsigned int	bi_baudrate;
-} bd_t;
-
-/* Memory map for the MBX as configured by EPPC-Bug.  We could reprogram
- * The SIU and PCI bridge, and try to use larger MMU pages, but the
- * performance gain is not measurable and it certainly complicates the
- * generic MMU model.
- *
- * In a effort to minimize memory usage for embedded applications, any
- * PCI driver or ISA driver must request or map the region required by
- * the device.  For convenience (and since we can map up to 4 Mbytes with
- * a single page table page), the MMU initialization will map the
- * NVRAM, Status/Control registers, CPM Dual Port RAM, and the PCI
- * Bridge CSRs 1:1 into the kernel address space.
- */
-#define PCI_ISA_IO_ADDR		((unsigned)0x80000000)
-#define PCI_ISA_IO_SIZE		((uint)(512 * 1024 * 1024))
-#define PCI_IDE_ADDR		((unsigned)0x81000000)
-#define PCI_ISA_MEM_ADDR	((unsigned)0xc0000000)
-#define PCI_ISA_MEM_SIZE	((uint)(512 * 1024 * 1024))
-#define PCMCIA_MEM_ADDR		((uint)0xe0000000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024 * 1024))
-#define PCMCIA_DMA_ADDR		((uint)0xe4000000)
-#define PCMCIA_DMA_SIZE		((uint)(64 * 1024 * 1024))
-#define PCMCIA_ATTRB_ADDR	((uint)0xe8000000)
-#define PCMCIA_ATTRB_SIZE	((uint)(64 * 1024 * 1024))
-#define PCMCIA_IO_ADDR		((uint)0xec000000)
-#define PCMCIA_IO_SIZE		((uint)(64 * 1024 * 1024))
-#define NVRAM_ADDR		((uint)0xfa000000)
-#define NVRAM_SIZE		((uint)(1 * 1024 * 1024))
-#define MBX_CSR_ADDR		((uint)0xfa100000)
-#define MBX_CSR_SIZE		((uint)(1 * 1024 * 1024))
-#define IMAP_ADDR		((uint)0xfa200000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-#define PCI_CSR_ADDR		((uint)0xfa210000)
-#define PCI_CSR_SIZE		((uint)(64 * 1024))
-
-/* Map additional physical space into well known virtual addresses.  Due
- * to virtual address mapping, these physical addresses are not accessible
- * in a 1:1 virtual to physical mapping.
- */
-#define ISA_IO_VIRT_ADDR	((uint)0xfa220000)
-#define ISA_IO_VIRT_SIZE	((uint)64 * 1024)
-
-/* Interrupt assignments.
- * These are defined (and fixed) by the MBX hardware implementation.
- */
-#define POWER_FAIL_INT	SIU_IRQ0	/* Power fail */
-#define TEMP_HILO_INT	SIU_IRQ1	/* Temperature sensor */
-#define QSPAN_INT	SIU_IRQ2	/* PCI Bridge (DMA CTLR?) */
-#define ISA_BRIDGE_INT	SIU_IRQ3	/* All those PC things */
-#define COMM_L_INT	SIU_IRQ6	/* MBX Comm expansion connector pin */
-#define STOP_ABRT_INT	SIU_IRQ7	/* Stop/Abort header pin */
-
-/* CPM Ethernet through SCCx.
- *
- * Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.  The TCLK and RCLK seem unique
- * to the MBX860 board.  Any two of the four available clocks could be
- * used, and the MPC860 cookbook manual has an example using different
- * clock pins.
- */
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PC_ENET_TENA	((ushort)0x0001)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000003d)
-
-/* The MBX uses the 8259.
-*/
-#define NR_8259_INTS	16
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __MACH_MBX_DEFS */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c
deleted file mode 100644
index 62370f4a5a0f..000000000000
--- a/arch/ppc/platforms/mpc866ads_setup.c
+++ /dev/null
@@ -1,413 +0,0 @@
-/*arch/ppc/platforms/mpc866ads_setup.c
- *
- * Platform setup for the Freescale mpc866ads board
- *
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * Copyright 2005-2006 MontaVista Software Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-
-#include <linux/fs_enet_pd.h>
-#include <linux/fs_uart_pd.h>
-#include <linux/mii.h>
-#include <linux/phy.h>
-
-#include <asm/delay.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/time.h>
-#include <asm/ppcboot.h>
-#include <asm/8xx_immap.h>
-#include <asm/cpm1.h>
-#include <asm/ppc_sys.h>
-#include <asm/mpc8xx.h>
-
-extern unsigned char __res[];
-
-static void setup_fec1_ioports(struct fs_platform_info*);
-static void setup_scc1_ioports(struct fs_platform_info*);
-static void setup_smc1_ioports(struct fs_uart_platform_info*);
-static void setup_smc2_ioports(struct fs_uart_platform_info*);
-
-static struct fs_mii_fec_platform_info	mpc8xx_mdio_fec_pdata;
-
-static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata;
-
-static struct fs_platform_info mpc8xx_enet_pdata[] = {
-	[fsid_fec1] = {
-		.rx_ring = 128,
-		.tx_ring = 16,
-		.rx_copybreak = 240,
-
-		.use_napi = 1,
-		.napi_weight = 17,
-
-		.init_ioports = setup_fec1_ioports,
-
-		.bus_id = "0:0f",
-		.has_phy = 1,
-	},
-	[fsid_scc1] = {
-		.rx_ring = 64,
-		.tx_ring = 8,
-		.rx_copybreak = 240,
-		.use_napi = 1,
-		.napi_weight = 17,
-
-
-		.init_ioports = setup_scc1_ioports,
-
-		.bus_id = "fixed@100:1",
-	},
-};
-
-static struct fs_uart_platform_info mpc866_uart_pdata[] = {
-	[fsid_smc1_uart] = {
-		.brg		= 1,
- 		.fs_no 		= fsid_smc1_uart,
- 		.init_ioports	= setup_smc1_ioports,
-		.tx_num_fifo	= 4,
-		.tx_buf_size	= 32,
-		.rx_num_fifo	= 4,
-		.rx_buf_size	= 32,
- 	},
- 	[fsid_smc2_uart] = {
- 		.brg		= 2,
- 		.fs_no 		= fsid_smc2_uart,
- 		.init_ioports	= setup_smc2_ioports,
-		.tx_num_fifo	= 4,
-		.tx_buf_size	= 32,
-		.rx_num_fifo	= 4,
-		.rx_buf_size	= 32,
- 	},
-};
-
-void __init board_init(void)
-{
-	volatile cpm8xx_t *cp = cpmp;
-	unsigned *bcsr_io;
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
-	if (bcsr_io == NULL) {
-		printk(KERN_CRIT "Could not remap BCSR1\n");
-		return;
-	}
-
-#ifdef CONFIG_SERIAL_CPM_SMC1
-	cp->cp_simode &= ~(0xe0000000 >> 17);	/* brg1 */
-	clrbits32(bcsr_io,(0x80000000 >> 7));
-	cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX);
-	cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-#else
-	setbits32(bcsr_io,(0x80000000 >> 7));
-
-	cp->cp_pbpar &= ~(0x000000c0);
-	cp->cp_pbdir |= 0x000000c0;
-	cp->cp_smc[0].smc_smcmr = 0;
-	cp->cp_smc[0].smc_smce = 0;
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SMC2
-	cp->cp_simode &= ~(0xe0000000 >> 1);
-	cp->cp_simode |= (0x20000000 >> 1);	/* brg2 */
-	clrbits32(bcsr_io,(0x80000000 >> 13));
-	cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX);
-	cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-#else
-	clrbits32(bcsr_io,(0x80000000 >> 13));
-	cp->cp_pbpar &= ~(0x00000c00);
-	cp->cp_pbdir |= 0x00000c00;
-	cp->cp_smc[1].smc_smcmr = 0;
-	cp->cp_smc[1].smc_smce = 0;
-#endif
-	iounmap(bcsr_io);
-}
-
-static void setup_fec1_ioports(struct fs_platform_info* pdata)
-{
-	immap_t *immap = (immap_t *) IMAP_ADDR;
-
-	setbits16(&immap->im_ioport.iop_pdpar, 0x1fff);
-	setbits16(&immap->im_ioport.iop_pddir, 0x1fff);
-}
-
-static void setup_scc1_ioports(struct fs_platform_info* pdata)
-{
-	immap_t *immap = (immap_t *) IMAP_ADDR;
-	unsigned *bcsr_io;
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
-	if (bcsr_io == NULL) {
-		printk(KERN_CRIT "Could not remap BCSR1\n");
-		return;
-	}
-
-	/* Enable the PHY.
-	 */
-	clrbits32(bcsr_io,BCSR1_ETHEN);
-
-	/* Configure port A pins for Txd and Rxd.
-	 */
-	/* Disable receive and transmit in case EPPC-Bug started it.
-	 */
-	setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD);
-	clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD);
-	clrbits16(&immap->im_ioport.iop_paodr, PA_ENET_TXD);
-
-	/* Configure port C pins to enable CLSN and RENA.
-	 */
-	clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
-	clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
-	setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
-	/* Configure port A for TCLK and RCLK.
-	 */
-	setbits16(&immap->im_ioport.iop_papar, PA_ENET_TCLK | PA_ENET_RCLK);
-	clrbits16(&immap->im_ioport.iop_padir, PA_ENET_TCLK | PA_ENET_RCLK);
-	clrbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA);
-	clrbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA);
-
-	/* Configure Serial Interface clock routing.
-	 * First, clear all SCC bits to zero, then set the ones we want.
-	 */
-	clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK);
-	setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT);
-
-	/* In the original SCC enet driver the following code is placed at
-	the end of the initialization */
-	setbits32(&immap->im_cpm.cp_pbpar, PB_ENET_TENA);
-	setbits32(&immap->im_cpm.cp_pbdir, PB_ENET_TENA);
-
-}
-
-static void setup_smc1_ioports(struct fs_uart_platform_info* pdata)
-{
-	immap_t *immap = (immap_t *) IMAP_ADDR;
-	unsigned *bcsr_io;
-	unsigned int iobits = 0x000000c0;
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
-	if (bcsr_io == NULL) {
-		printk(KERN_CRIT "Could not remap BCSR1\n");
-		return;
-	}
-
-	clrbits32(bcsr_io,BCSR1_RS232EN_1);
-	iounmap(bcsr_io);
-
-	setbits32(&immap->im_cpm.cp_pbpar, iobits);
-	clrbits32(&immap->im_cpm.cp_pbdir, iobits);
-	clrbits16(&immap->im_cpm.cp_pbodr, iobits);
-
-}
-
-static void setup_smc2_ioports(struct fs_uart_platform_info* pdata)
-{
-	immap_t *immap = (immap_t *) IMAP_ADDR;
-	unsigned *bcsr_io;
-	unsigned int iobits = 0x00000c00;
-
-	bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
-
-	if (bcsr_io == NULL) {
-		printk(KERN_CRIT "Could not remap BCSR1\n");
-		return;
-	}
-
-	clrbits32(bcsr_io,BCSR1_RS232EN_2);
-
-	iounmap(bcsr_io);
-
-#ifndef CONFIG_SERIAL_CPM_ALT_SMC2
-	setbits32(&immap->im_cpm.cp_pbpar, iobits);
-	clrbits32(&immap->im_cpm.cp_pbdir, iobits);
-	clrbits16(&immap->im_cpm.cp_pbodr, iobits);
-#else
-	setbits16(&immap->im_ioport.iop_papar, iobits);
-	clrbits16(&immap->im_ioport.iop_padir, iobits);
-	clrbits16(&immap->im_ioport.iop_paodr, iobits);
-#endif
-
-}
-
-static int ma_count = 0;
-
-static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
-{
-	struct fs_platform_info *fpi;
-
-	volatile cpm8xx_t *cp;
-	bd_t *bd = (bd_t *) __res;
-	char *e;
-	int i;
-
-	/* Get pointer to Communication Processor */
-	cp = cpmp;
-
-	if(fs_no >= ARRAY_SIZE(mpc8xx_enet_pdata)) {
-		printk(KERN_ERR"No network-suitable #%d device on bus", fs_no);
-		return;
-	}
-
-
-	fpi = &mpc8xx_enet_pdata[fs_no];
-	fpi->fs_no = fs_no;
-	pdev->dev.platform_data = fpi;
-
-	e = (unsigned char *)&bd->bi_enetaddr;
-	for (i = 0; i < 6; i++)
-		fpi->macaddr[i] = *e++;
-
-	fpi->macaddr[5] += ma_count++;
-}
-
-static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev,
-					   int idx)
-{
-	/* This is for FEC devices only */
-	if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec")))
-		return;
-	mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1);
-}
-
-static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev,
-					   int idx)
-{
-	/* This is for SCC devices only */
-	if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc")))
-		return;
-
-	mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
-}
-
-static void __init mpc866ads_fixup_uart_pdata(struct platform_device *pdev,
-                                              int idx)
-{
-	bd_t *bd = (bd_t *) __res;
-	struct fs_uart_platform_info *pinfo;
-	int num = ARRAY_SIZE(mpc866_uart_pdata);
-
-	int id = fs_uart_id_smc2fsid(idx);
-
-	/* no need to alter anything if console */
-	if ((id < num) && (!pdev->dev.platform_data)) {
-		pinfo = &mpc866_uart_pdata[id];
-		pinfo->uart_clk = bd->bi_intfreq;
-		pdev->dev.platform_data = pinfo;
-	}
-}
-
-static int mpc866ads_platform_notify(struct device *dev)
-{
-	static const struct platform_notify_dev_map dev_map[] = {
-		{
-			.bus_id = "fsl-cpm-fec",
-			.rtn = mpc866ads_fixup_fec_enet_pdata,
-		},
-		{
-			.bus_id = "fsl-cpm-scc",
-			.rtn = mpc866ads_fixup_scc_enet_pdata,
-		},
-		{
-			.bus_id = "fsl-cpm-smc:uart",
-			.rtn = mpc866ads_fixup_uart_pdata
-		},
-		{
-			.bus_id = NULL
-		}
-	};
-
-	platform_notify_map(dev_map,dev);
-
-	return 0;
-}
-
-int __init mpc866ads_init(void)
-{
-	bd_t *bd = (bd_t *) __res;
-	struct fs_mii_fec_platform_info* fmpi;
-
-	printk(KERN_NOTICE "mpc866ads: Init\n");
-
-	platform_notify = mpc866ads_platform_notify;
-
-	ppc_sys_device_initfunc();
-	ppc_sys_device_disable_all();
-
-#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC1
-	ppc_sys_device_enable(MPC8xx_CPM_SCC1);
-#endif
-	ppc_sys_device_enable(MPC8xx_CPM_FEC1);
-
-	ppc_sys_device_enable(MPC8xx_MDIO_FEC);
-
-	fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
-		&mpc8xx_mdio_fec_pdata;
-
-	fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;
-	/* No PHY interrupt line here */
-	fmpi->irq[0xf] = PHY_POLL;
-
-/* Since either of the uarts could be used as console, they need to ready */
-#ifdef CONFIG_SERIAL_CPM_SMC1
-	ppc_sys_device_enable(MPC8xx_CPM_SMC1);
-	ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART);
-#endif
-
-#ifdef CONFIG_SERIAL_CPM_SMC2
-	ppc_sys_device_enable(MPC8xx_CPM_SMC2);
-	ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
-#endif
-	ppc_sys_device_enable(MPC8xx_MDIO_FEC);
-
-	fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
-		&mpc8xx_mdio_fec_pdata;
-
-	fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;
-	/* No PHY interrupt line here */
-	fmpi->irq[0xf] = PHY_POLL;
-
-	return 0;
-}
-
-/*
-   To prevent confusion, console selection is gross:
-   by 0 assumed SMC1 and by 1 assumed SMC2
- */
-struct platform_device* early_uart_get_pdev(int index)
-{
-	bd_t *bd = (bd_t *) __res;
-	struct fs_uart_platform_info *pinfo;
-
-	struct platform_device* pdev = NULL;
-	if(index) { /*assume SMC2 here*/
-		pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2];
-		pinfo = &mpc866_uart_pdata[1];
-	} else { /*over SMC1*/
-		pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1];
-		pinfo = &mpc866_uart_pdata[0];
-	}
-
-	pinfo->uart_clk = bd->bi_intfreq;
-	pdev->dev.platform_data = pinfo;
-	ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR);
-	return NULL;
-}
-
-arch_initcall(mpc866ads_init);
diff --git a/arch/ppc/platforms/mvme5100.c b/arch/ppc/platforms/mvme5100.c
deleted file mode 100644
index 053b54ac88f2..000000000000
--- a/arch/ppc/platforms/mvme5100.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * Board setup routines for the Motorola MVME5100.
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/kdev_t.h>
-#include <linux/root_dev.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/todc.h>
-#include <asm/pci-bridge.h>
-#include <asm/bootinfo.h>
-#include <asm/hawk.h>
-
-#include <platforms/pplus.h>
-#include <platforms/mvme5100.h>
-
-static u_char mvme5100_openpic_initsenses[16] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* i8259 cascade */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* TL16C550 UART 1,2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Enet1 front panel or P2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Hawk Watchdog 1,2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* DS1621 thermal alarm */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT0# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT1# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT2# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Universe II LINT3# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTA#, PMC2 INTB# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTB#, PMC2 INTC# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTC#, PMC2 INTD# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* PMC1 INTD#, PMC2 INTA# */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Enet 2 (front panel) */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Abort Switch */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* RTC Alarm */
-};
-
-static inline int
-mvme5100_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	int irq;
-
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{  0,  0,  0,  0 },	/* IDSEL 11 - Winbond */
-		{  0,  0,  0,  0 },	/* IDSEL 12 - unused */
-		{ 21, 22, 23, 24 },	/* IDSEL 13 - Universe II */
-		{ 18,  0,  0,  0 },	/* IDSEL 14 - Enet 1 */
-		{  0,  0,  0,  0 },	/* IDSEL 15 - unused */
-		{ 25, 26, 27, 28 },	/* IDSEL 16 - PMC Slot 1 */
-		{ 28, 25, 26, 27 },	/* IDSEL 17 - PMC Slot 2 */
-		{  0,  0,  0,  0 },	/* IDSEL 18 - unused */
-		{ 29,  0,  0,  0 },	/* IDSEL 19 - Enet 2 */
-		{  0,  0,  0,  0 },	/* IDSEL 20 - PMCSPAN */
-	};
-
-	const long min_idsel = 11, max_idsel = 20, irqs_per_slot = 4;
-	irq = PCI_IRQ_TABLE_LOOKUP;
-	/* If lookup is zero, always return 0 */
-	if (!irq)
-		return 0;
-	else
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-	/* If IPMC761 present, return table value */
-	return irq;
-#else
-	/* If IPMC761 not present, we don't have an i8259 so adjust */
-	return (irq - NUM_8259_INTERRUPTS);
-#endif
-}
-
-static void
-mvme5100_pcibios_fixup_resources(struct pci_dev *dev)
-{
-	int i;
-
-	if ((dev->vendor == PCI_VENDOR_ID_MOTOROLA) &&
-			(dev->device == PCI_DEVICE_ID_MOTOROLA_HAWK))
-		for (i=0; i<DEVICE_COUNT_RESOURCE; i++)
-		{
-			dev->resource[i].start = 0;
-			dev->resource[i].end = 0;
-		}
-}
-
-static void __init
-mvme5100_setup_bridge(void)
-{
-	struct pci_controller*	hose;
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->pci_mem_offset = MVME5100_PCI_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource, MVME5100_PCI_LOWER_IO,
-			MVME5100_PCI_UPPER_IO, IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0], MVME5100_PCI_LOWER_MEM,
-			MVME5100_PCI_UPPER_MEM, IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = MVME5100_PCI_LOWER_IO;
-	hose->io_space.end = MVME5100_PCI_UPPER_IO;
-	hose->mem_space.start = MVME5100_PCI_LOWER_MEM;
-	hose->mem_space.end = MVME5100_PCI_UPPER_MEM;
-	hose->io_base_virt = (void *)MVME5100_ISA_IO_BASE;
-
-	/* Use indirect method of Hawk */
-	setup_indirect_pci(hose, MVME5100_PCI_CONFIG_ADDR,
-			MVME5100_PCI_CONFIG_DATA);
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pcibios_fixup_resources = mvme5100_pcibios_fixup_resources;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = mvme5100_map_irq;
-}
-
-static void __init
-mvme5100_setup_arch(void)
-{
-	if ( ppc_md.progress )
-		ppc_md.progress("mvme5100_setup_arch: enter", 0);
-
-	loops_per_jiffy = 50000000 / HZ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	if ( ppc_md.progress )
-		ppc_md.progress("mvme5100_setup_arch: find_bridges", 0);
-
-	/* Setup PCI host bridge */
-	mvme5100_setup_bridge();
-
-	/* Find and map our OpenPIC */
-	hawk_mpic_init(MVME5100_PCI_MEM_OFFSET);
-	OpenPIC_InitSenses = mvme5100_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(mvme5100_openpic_initsenses);
-
-	printk("MVME5100 port (C) 2001 MontaVista Software, Inc. (source@mvista.com)\n");
-
-	if ( ppc_md.progress )
-		ppc_md.progress("mvme5100_setup_arch: exit", 0);
-
-	return;
-}
-
-static void __init
-mvme5100_init2(void)
-{
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-		request_region(0x00,0x20,"dma1");
-		request_region(0x20,0x20,"pic1");
-		request_region(0x40,0x20,"timer");
-		request_region(0x80,0x10,"dma page reg");
-		request_region(0xa0,0x20,"pic2");
-		request_region(0xc0,0x20,"dma2");
-#endif
-	return;
-}
-
-/*
- * Interrupt setup and service.
- * Have MPIC on HAWK and cascaded 8259s on Winbond cascaded to MPIC.
- */
-static void __init
-mvme5100_init_IRQ(void)
-{
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-	int i;
-#endif
-
-	if ( ppc_md.progress )
-		ppc_md.progress("init_irq: enter", 0);
-
-	openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000);
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-	openpic_init(NUM_8259_INTERRUPTS);
-	openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
-			&i8259_irq);
-
-	i8259_init(0, 0);
-#else
-	openpic_init(0);
-#endif
-
-	if ( ppc_md.progress )
-		ppc_md.progress("init_irq: exit", 0);
-
-	return;
-}
-
-/*
- * Set BAT 3 to map 0xf0000000 to end of physical memory space.
- */
-static __inline__ void
-mvme5100_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf0001ffe);
-	mtspr(SPRN_DBAT1L, 0xf000002a);
-	mb();
-}
-
-static unsigned long __init
-mvme5100_find_end_of_memory(void)
-{
-	return hawk_get_mem_size(MVME5100_HAWK_SMC_BASE);
-}
-
-static void __init
-mvme5100_map_io(void)
-{
-	io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO);
-	ioremap_base = 0xfe000000;
-}
-
-static void
-mvme5100_reset_board(void)
-{
-	local_irq_disable();
-
-	/* Set exception prefix high - to the firmware */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	out_8((u_char *)MVME5100_BOARD_MODRST_REG, 0x01);
-
-	return;
-}
-
-static void
-mvme5100_restart(char *cmd)
-{
-	volatile ulong i = 10000000;
-
-	mvme5100_reset_board();
-
-	while (i-- > 0);
-	panic("restart failed\n");
-}
-
-static void
-mvme5100_halt(void)
-{
-	local_irq_disable();
-	while (1);
-}
-
-static void
-mvme5100_power_off(void)
-{
-	mvme5100_halt();
-}
-
-static int
-mvme5100_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: Motorola\n");
-	seq_printf(m, "machine\t\t: MVME5100\n");
-
-	return 0;
-}
-
-TODC_ALLOC();
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-	mvme5100_set_bat();
-
-	isa_io_base = MVME5100_ISA_IO_BASE;
-	isa_mem_base = MVME5100_ISA_MEM_BASE;
-	pci_dram_offset = MVME5100_PCI_DRAM_OFFSET;
-
-	ppc_md.setup_arch = mvme5100_setup_arch;
-	ppc_md.show_cpuinfo = mvme5100_show_cpuinfo;
-	ppc_md.init_IRQ = mvme5100_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-	ppc_md.init = mvme5100_init2;
-
-	ppc_md.restart = mvme5100_restart;
-	ppc_md.power_off = mvme5100_power_off;
-	ppc_md.halt = mvme5100_halt;
-
-	ppc_md.find_end_of_memory = mvme5100_find_end_of_memory;
-	ppc_md.setup_io_mappings = mvme5100_map_io;
-
-	TODC_INIT(TODC_TYPE_MK48T37, MVME5100_NVRAM_AS0, MVME5100_NVRAM_AS1,
-			MVME5100_NVRAM_DATA, 8);
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_m48txx_read_val;
-	ppc_md.nvram_write_val = todc_m48txx_write_val;
-}
diff --git a/arch/ppc/platforms/mvme5100.h b/arch/ppc/platforms/mvme5100.h
deleted file mode 100644
index fbb5495165c7..000000000000
--- a/arch/ppc/platforms/mvme5100.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * arch/ppc/platforms/mvme5100.h
- *
- * Definitions for Motorola MVME5100.
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_MVME5100_H__
-#define __ASM_MVME5100_H__
-
-#define MVME5100_HAWK_SMC_BASE		0xfef80000
-
-#define	MVME5100_PCI_CONFIG_ADDR	0xfe000cf8
-#define	MVME5100_PCI_CONFIG_DATA	0xfe000cfc
-
-#define MVME5100_PCI_IO_BASE		0xfe000000
-#define MVME5100_PCI_MEM_BASE		0x80000000
-
-#define MVME5100_PCI_MEM_OFFSET		0x00000000
-
-#define MVME5100_PCI_DRAM_OFFSET	0x00000000
-#define MVME5100_ISA_MEM_BASE		0x00000000
-#define MVME5100_ISA_IO_BASE		MVME5100_PCI_IO_BASE
-
-#define MVME5100_PCI_LOWER_MEM		0x80000000
-#define MVME5100_PCI_UPPER_MEM		0xf3f7ffff
-#define MVME5100_PCI_LOWER_IO		0x00000000
-#define MVME5100_PCI_UPPER_IO		0x0077ffff
-
-/* MVME5100 board register addresses. */
-#define	MVME5100_BOARD_STATUS_REG	0xfef88080
-#define	MVME5100_BOARD_MODFAIL_REG	0xfef88090
-#define	MVME5100_BOARD_MODRST_REG	0xfef880a0
-#define	MVME5100_BOARD_TBEN_REG		0xfef880c0
-#define MVME5100_BOARD_SW_READ_REG	0xfef880e0
-#define	MVME5100_BOARD_GEO_ADDR_REG	0xfef880e8
-#define	MVME5100_BOARD_EXT_FEATURE1_REG	0xfef880f0
-#define	MVME5100_BOARD_EXT_FEATURE2_REG	0xfef88100
-
-/* Define the NVRAM/RTC address strobe & data registers */
-#define MVME5100_PHYS_NVRAM_AS0		0xfef880c8
-#define MVME5100_PHYS_NVRAM_AS1		0xfef880d0
-#define MVME5100_PHYS_NVRAM_DATA	0xfef880d8
-
-#define MVME5100_NVRAM_AS0	(MVME5100_PHYS_NVRAM_AS0 - MVME5100_ISA_IO_BASE)
-#define MVME5100_NVRAM_AS1	(MVME5100_PHYS_NVRAM_AS1 - MVME5100_ISA_IO_BASE)
-#define MVME5100_NVRAM_DATA	(MVME5100_PHYS_NVRAM_DATA - MVME5100_ISA_IO_BASE)
-
-/* UART clock, addresses, and irq */
-#define MVME5100_BASE_BAUD		1843200
-#define	MVME5100_SERIAL_1		0xfef88000
-#define	MVME5100_SERIAL_2		0xfef88200
-#ifdef CONFIG_MVME5100_IPMC761_PRESENT
-#define MVME5100_SERIAL_IRQ		17
-#else
-#define MVME5100_SERIAL_IRQ		1
-#endif
-
-#define RS_TABLE_SIZE  4
-
-#define BASE_BAUD ( MVME5100_BASE_BAUD / 16 )
-
-#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
-
-/* All UART IRQs are wire-OR'd to one MPIC IRQ */
-#define STD_SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, MVME5100_SERIAL_1, \
-		MVME5100_SERIAL_IRQ, \
-		STD_COM_FLAGS, /* ttyS0 */ \
-		iomem_base: (unsigned char *)MVME5100_SERIAL_1,		\
-		iomem_reg_shift: 4,					\
-		io_type: SERIAL_IO_MEM },				\
-        { 0, BASE_BAUD, MVME5100_SERIAL_2, \
-		MVME5100_SERIAL_IRQ, \
-		STD_COM_FLAGS, /* ttyS1 */ \
-		iomem_base: (unsigned char *)MVME5100_SERIAL_2,		\
-		iomem_reg_shift: 4,					\
-		io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-
-#endif /* __ASM_MVME5100_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/pal4.h b/arch/ppc/platforms/pal4.h
deleted file mode 100644
index 8569c423d887..000000000000
--- a/arch/ppc/platforms/pal4.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Definitions for SBS Palomar IV board
- *
- * Author: Dan Cox
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PPC_PLATFORMS_PAL4_H
-#define __PPC_PLATFORMS_PAL4_H
-
-#define PAL4_NVRAM             0xfffc0000
-#define PAL4_NVRAM_SIZE        0x8000
-
-#define PAL4_DRAM              0xfff80000
-#define  PAL4_DRAM_BR_MASK     0xc0
-#define  PAL4_DRAM_BR_SHIFT    6
-#define  PAL4_DRAM_RESET       0x10
-#define  PAL4_DRAM_EREADY      0x40
-
-#define PAL4_MISC              0xfff80004
-#define  PAL4_MISC_FB_MASK     0xc0
-#define  PAL4_MISC_FLASH       0x20  /* StratFlash mapping: 1->0xff80, 0->0xfff0 */
-#define  PAL4_MISC_MISC        0x08
-#define  PAL4_MISC_BITF        0x02
-#define  PAL4_MISC_NVKS        0x01
-
-#define PAL4_L2                0xfff80008
-#define  PAL4_L2_MASK          0x07
-
-#define PAL4_PLDR              0xfff8000c
-
-/* Only two Ethernet devices on the board... */
-#define PAL4_ETH               31
-#define PAL4_INTA              20
-
-#endif /* __PPC_PLATFORMS_PAL4_H */
diff --git a/arch/ppc/platforms/pal4_pci.c b/arch/ppc/platforms/pal4_pci.c
deleted file mode 100644
index d81ae1c7e1cf..000000000000
--- a/arch/ppc/platforms/pal4_pci.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * PCI support for SBS Palomar IV
- *
- * Author: Dan Cox
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/byteorder.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/uaccess.h>
-
-#include <syslib/cpc700.h>
-
-#include "pal4.h"
-
-/* not much to this.... */
-static inline int __init
-pal4_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	if (idsel == 9)
-		return PAL4_ETH;
-	else
-		return PAL4_INTA + (idsel - 3);
-}
-
-void __init
-pal4_find_bridges(void)
-{
-	struct pci_controller *hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->pci_mem_offset = 0;
-
-	/* Could snatch these from the CPC700.... */
-	pci_init_resource(&hose->io_resource,
-			  0x0,
-			  0x03ffffff,
-			  IORESOURCE_IO,
-			  "PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			  0x90000000,
-			  0x9fffffff,
-			  IORESOURCE_MEM,
-			  "PCI host bridge");
-
-	hose->io_space.start = 0x00800000;
-	hose->io_space.end = 0x03ffffff;
-	hose->mem_space.start = 0x90000000;
-	hose->mem_space.end = 0x9fffffff;
-	hose->io_base_virt = (void *) 0xf8000000;
-
-	setup_indirect_pci(hose, CPC700_PCI_CONFIG_ADDR,
-			   CPC700_PCI_CONFIG_DATA);
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = pal4_map_irq;
-}
diff --git a/arch/ppc/platforms/pal4_serial.h b/arch/ppc/platforms/pal4_serial.h
deleted file mode 100644
index a75343224cfd..000000000000
--- a/arch/ppc/platforms/pal4_serial.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * Definitions for SBS PalomarIV serial support
- *
- * Author: Dan Cox
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PPC_PAL4_SERIAL_H
-#define __PPC_PAL4_SERIAL_H
-
-#define CPC700_SERIAL_1       0xff600300
-#define CPC700_SERIAL_2       0xff600400
-
-#define RS_TABLE_SIZE     2
-#define BASE_BAUD         (33333333 / 4 / 16)
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST)
-#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF)
-#endif
-
-#define SERIAL_PORT_DFNS \
-      {0, BASE_BAUD, CPC700_SERIAL_1, 3, STD_COM_FLAGS, \
-       iomem_base: (unsigned char *) CPC700_SERIAL_1, \
-       io_type: SERIAL_IO_MEM},   /* ttyS0 */ \
-      {0, BASE_BAUD, CPC700_SERIAL_2, 4, STD_COM_FLAGS, \
-       iomem_base: (unsigned char *) CPC700_SERIAL_2, \
-       io_type: SERIAL_IO_MEM}
-
-#endif
diff --git a/arch/ppc/platforms/pal4_setup.c b/arch/ppc/platforms/pal4_setup.c
deleted file mode 100644
index 3da47d9ec7a2..000000000000
--- a/arch/ppc/platforms/pal4_setup.c
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Board setup routines for the SBS PalomarIV.
- *
- * Author: Dan Cox
- *
- * 2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/time.h>
-#include <linux/irq.h>
-#include <linux/kdev_t.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/io.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/machdep.h>
-
-#include <syslib/cpc700.h>
-
-#include "pal4.h"
-
-extern void pal4_find_bridges(void);
-
-unsigned int cpc700_irq_assigns[][2] = {
-        {1, 1},    /* IRQ 0: ECC correctable error */
-        {1, 1},    /* IRQ 1: PCI write to memory range */
-        {0, 1},    /* IRQ 2: PCI write to command register */
-        {0, 1},    /* IRQ 3: UART 0 */
-        {0, 1},    /* IRQ 4: UART 1 */
-        {0, 1},    /* IRQ 5: ICC 0 */
-        {0, 1},    /* IRQ 6: ICC 1 */
-        {0, 1},    /* IRQ 7: GPT compare 0 */
-        {0, 1},    /* IRQ 8: GPT compare 1 */
-        {0, 1},    /* IRQ 9: GPT compare 2 */
-        {0, 1},    /* IRQ 10: GPT compare 3 */
-        {0, 1},    /* IRQ 11: GPT compare 4 */
-        {0, 1},    /* IRQ 12: GPT capture 0 */
-        {0, 1},    /* IRQ 13: GPT capture 1 */
-        {0, 1},    /* IRQ 14: GPT capture 2 */
-        {0, 1},    /* IRQ 15: GPT capture 3 */
-        {0, 1},    /* IRQ 16: GPT capture 4 */
-        {0, 0},    /* IRQ 17: reserved */
-        {0, 0},    /* IRQ 18: reserved */
-        {0, 0},    /* IRQ 19: reserved */
-        {0, 0},    /* IRQ 20: reserved */
-        {0, 1},    /* IRQ 21: Ethernet */
-        {0, 0},    /* IRQ 22: reserved */
-        {0, 0},    /* IRQ 23: reserved */
-        {0, 0},    /* IRQ 24: resreved */
-        {0, 0},    /* IRQ 25: reserved */
-        {0, 0},    /* IRQ 26: reserved */
-        {0, 0},    /* IRQ 27: reserved */
-        {0, 0},    /* IRQ 28: reserved */
-        {0, 0},    /* IRQ 29: reserved */
-        {0, 0},    /* IRQ 30: reserved */
-        {0, 0},    /* IRQ 31: reserved */
-};
-
-static int
-pal4_show_cpuinfo(struct seq_file *m)
-{
-        seq_printf(m, "board\t\t: SBS Palomar IV\n");
-
-        return 0;
-}
-
-static void
-pal4_restart(char *cmd)
-{
-        local_irq_disable();
-        __asm__ __volatile__("lis  3,0xfff0\n \
-                              ori  3,3,0x100\n \
-                              mtspr 26,3\n \
-                              li   3,0\n \
-                              mtspr 27,3\n \
-                              rfi");
-
-        for(;;);
-}
-
-static void
-pal4_power_off(void)
-{
-	local_irq_disable();
-	for(;;);
-}
-
-static void
-pal4_halt(void)
-{
-	pal4_power_off();
-}
-
-TODC_ALLOC();
-
-static void __init
-pal4_setup_arch(void)
-{
-	unsigned long l2;
-
-	TODC_INIT(TODC_TYPE_MK48T37, 0, 0,
-		  ioremap(PAL4_NVRAM, PAL4_NVRAM_SIZE), 8);
-
-	pal4_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-		ROOT_DEV = Root_NFS;
-
-	/* The L2 gets disabled in the bootloader, but all the proper
-	   bits should be present from the fw, so just re-enable it */
-	l2 = _get_L2CR();
-	if (!(l2 & L2CR_L2E)) {
-		/* presume that it was initially set if the size is
-		   still present. */
-		if (l2 ^ L2CR_L2SIZ_MASK)
-			_set_L2CR(l2 | L2CR_L2E);
-		else
-			printk("L2 not set by firmware; left disabled.\n");
-	}
-}
-
-static void __init
-pal4_map_io(void)
-{
-	io_block_mapping(0xf0000000, 0xf0000000, 0x10000000, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	isa_io_base = 0 /*PAL4_ISA_IO_BASE*/;
-	pci_dram_offset = 0 /*PAL4_PCI_SYS_MEM_BASE*/;
-
-	ppc_md.setup_arch = pal4_setup_arch;
-	ppc_md.show_cpuinfo = pal4_show_cpuinfo;
-
-	ppc_md.setup_io_mappings = pal4_map_io;
-
-	ppc_md.init_IRQ = cpc700_init_IRQ;
-	ppc_md.get_irq = cpc700_get_irq;
-
-	ppc_md.restart = pal4_restart;
-	ppc_md.halt = pal4_halt;
-	ppc_md.power_off = pal4_power_off;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-}
-
diff --git a/arch/ppc/platforms/pcu_e.h b/arch/ppc/platforms/pcu_e.h
deleted file mode 100644
index a2c03a22875e..000000000000
--- a/arch/ppc/platforms/pcu_e.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Siemens PCU E board specific definitions
- *
- * Copyright (c) 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __MACH_PCU_E_H
-#define __MACH_PCU_E_H
-
-
-#include <asm/ppcboot.h>
-
-#define	PCU_E_IMMR_BASE    0xFE000000	/* phys. addr of IMMR			*/
-#define	PCU_E_IMAP_SIZE   (64 * 1024)	/* size of mapped area			*/
-
-#define	IMAP_ADDR     PCU_E_IMMR_BASE	/* physical base address of IMMR area	*/
-#define IMAP_SIZE     PCU_E_IMAP_SIZE	/* mapped size of IMMR area		*/
-
-#define	FEC_INTERRUPT	15		/* = SIU_LEVEL7				*/
-#define	DEC_INTERRUPT	13		/* = SIU_LEVEL6				*/
-#define	CPM_INTERRUPT	11		/* = SIU_LEVEL5 (was: SIU_LEVEL2)	*/
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif	/* __MACH_PCU_E_H */
diff --git a/arch/ppc/platforms/powerpmc250.c b/arch/ppc/platforms/powerpmc250.c
deleted file mode 100644
index 162dc85ff7be..000000000000
--- a/arch/ppc/platforms/powerpmc250.c
+++ /dev/null
@@ -1,378 +0,0 @@
-/*
- * Board setup routines for Force PowerPMC-250 Processor PMC
- *
- * Author: Troy Benjegerdes <tbenjegerdes@mvista.com>
- * Borrowed heavily from prpmc750_*.c by
- * 	Matt Porter <mporter@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/byteorder.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <platforms/powerpmc250.h>
-#include <asm/open_pic.h>
-#include <asm/pci-bridge.h>
-#include <asm/mpc10x.h>
-#include <asm/uaccess.h>
-#include <asm/bootinfo.h>
-
-extern void powerpmc250_find_bridges(void);
-extern unsigned long loops_per_jiffy;
-
-static u_char powerpmc250_openpic_initsenses[] __initdata =
-{
-    0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-    1,	/* PMC INTA (also MPC107 output interrupt INTA) */
-    1,	/* PMC INTB (also I82559 Ethernet controller) */
-    1,	/* PMC INTC */
-    1,	/* PMC INTD */
-    0,	/* DUART interrupt (active high) */
-};
-
-static int
-powerpmc250_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m,"machine\t\t: Force PowerPMC250\n");
-
-	return 0;
-}
-
-static void __init
-powerpmc250_setup_arch(void)
-{
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000/HZ;
-
-	/* Lookup PCI host bridges */
-	powerpmc250_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	printk("Force PowerPMC250 port (C) 2001 MontaVista Software, Inc. (source@mvista.com)\n");
-}
-
-#if 0
-/*
- * Compute the PrPMC750's bus speed using the baud clock as a
- * reference.
- */
-unsigned long __init powerpmc250_get_bus_speed(void)
-{
-	unsigned long tbl_start, tbl_end;
-	unsigned long current_state, old_state, bus_speed;
-	unsigned char lcr, dll, dlm;
-	int baud_divisor, count;
-
-	/* Read the UART's baud clock divisor */
-	lcr = readb(PRPMC750_SERIAL_0_LCR);
-	writeb(lcr | UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR);
-	dll = readb(PRPMC750_SERIAL_0_DLL);
-	dlm = readb(PRPMC750_SERIAL_0_DLM);
-	writeb(lcr & ~UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR);
-	baud_divisor = (dlm << 8) | dll;
-
-	/*
-	 * Use the baud clock divisor and base baud clock
-	 * to determine the baud rate and use that as
-	 * the number of baud clock edges we use for
-	 * the time base sample.  Make it half the baud
-	 * rate.
-	 */
-	count = PRPMC750_BASE_BAUD / (baud_divisor * 16);
-
-	/* Find the first edge of the baud clock */
-	old_state = readb(PRPMC750_STATUS_REG) & PRPMC750_BAUDOUT_MASK;
-	do {
-		current_state = readb(PRPMC750_STATUS_REG) &
-			PRPMC750_BAUDOUT_MASK;
-	} while(old_state == current_state);
-
-	old_state = current_state;
-
-	/* Get the starting time base value */
-	tbl_start = get_tbl();
-
-	/*
-	 * Loop until we have found a number of edges equal
-	 * to half the count (half the baud rate)
-	 */
-	do {
-		do {
-			current_state = readb(PRPMC750_STATUS_REG) &
-				PRPMC750_BAUDOUT_MASK;
-		} while(old_state == current_state);
-		old_state = current_state;
-	} while (--count);
-
-	/* Get the ending time base value */
-	tbl_end = get_tbl();
-
-	/* Compute bus speed */
-	bus_speed = (tbl_end-tbl_start)*128;
-
-	return bus_speed;
-}
-#endif
-
-static void __init
-powerpmc250_calibrate_decr(void)
-{
-	unsigned long freq;
-	int divisor = 4;
-
-	//freq = powerpmc250_get_bus_speed();
-#warning hardcoded bus freq
-	freq = 100000000;
-
-	tb_ticks_per_jiffy = freq / (HZ * divisor);
-	tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000);
-}
-
-static void
-powerpmc250_restart(char *cmd)
-{
-	local_irq_disable();
-	/* Hard reset */
-	writeb(0x11, 0xfe000332);
-	while(1);
-}
-
-static void
-powerpmc250_halt(void)
-{
-	local_irq_disable();
-	while (1);
-}
-
-static void
-powerpmc250_power_off(void)
-{
-	powerpmc250_halt();
-}
-
-static void __init
-powerpmc250_init_IRQ(void)
-{
-
-	OpenPIC_InitSenses = powerpmc250_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(powerpmc250_openpic_initsenses);
-	mpc10x_set_openpic();
-}
-
-/*
- * Set BAT 3 to map 0xf0000000 to end of physical memory space.
- */
-static __inline__ void
-powerpmc250_set_bat(void)
-{
-	unsigned long   bat3u, bat3l;
-	static int	mapping_set = 0;
-
-	if (!mapping_set)
-	{
-		__asm__ __volatile__(
-				" lis %0,0xf000\n \
-				ori %1,%0,0x002a\n \
-				ori %0,%0,0x1ffe\n \
-				mtspr 0x21e,%0\n \
-				mtspr 0x21f,%1\n \
-				isync\n \
-				sync "
-				: "=r" (bat3u), "=r" (bat3l));
-
-		mapping_set = 1;
-	}
-	return;
-}
-
-static unsigned long __init
-powerpmc250_find_end_of_memory(void)
-{
-	/* Cover I/O space with a BAT */
-	/* yuck, better hope your ram size is a power of 2  -- paulus */
-	powerpmc250_set_bat();
-
-	return mpc10x_get_mem_size(MPC10X_MEM_MAP_B);
-}
-
-static void __init
-powerpmc250_map_io(void)
-{
-	io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if ( r4 )
-	{
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif
-
-	/* Copy cmd_line parameters */
-	if ( r6)
-	{
-		*(char *)(r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6 + KERNELBASE));
-	}
-
-	isa_io_base = MPC10X_MAPB_ISA_IO_BASE;
-	isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE;
-	pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET;
-
-	ppc_md.setup_arch	= powerpmc250_setup_arch;
-	ppc_md.show_cpuinfo	= powerpmc250_show_cpuinfo;
-	ppc_md.init_IRQ		= powerpmc250_init_IRQ;
-	ppc_md.get_irq		= openpic_get_irq;
-
-	ppc_md.find_end_of_memory = powerpmc250_find_end_of_memory;
-	ppc_md.setup_io_mappings = powerpmc250_map_io;
-
-	ppc_md.restart		= powerpmc250_restart;
-	ppc_md.power_off	= powerpmc250_power_off;
-	ppc_md.halt		= powerpmc250_halt;
-
-	/* PowerPMC250 has no timekeeper part */
-	ppc_md.time_init	= NULL;
-	ppc_md.get_rtc_time	= NULL;
-	ppc_md.set_rtc_time	= NULL;
-	ppc_md.calibrate_decr	= powerpmc250_calibrate_decr;
-}
-
-
-/*
- * (This used to be arch/ppc/platforms/powerpmc250_pci.c)
- *
- * PCI support for Force PowerPMC250
- *
- */
-
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif /* DEBUG */
-
-static inline int __init
-powerpmc250_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *      PCI IDSEL/INTPIN->INTLINE
-	 *      A       B       C       D
-	 */
-	{
-		{17,	0,	0,	0},	/* Device 11 - 82559 */
-		{0,	0,	0,	0},	/* 12 */
-		{0,	0,	0,	0},	/* 13 */
-		{0,	0,	0,	0},	/* 14 */
-		{0,	0,	0,	0},	/* 15 */
-		{16,	17,	18,	19},	/* Device 16 - PMC A1?? */
-		};
-	const long min_idsel = 11, max_idsel = 16, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-static int
-powerpmc250_exclude_device(u_char bus, u_char devfn)
-{
-	/*
-	 * While doing PCI Scan  the MPC107 will 'detect' itself as
-	 * device on the PCI Bus, will create an incorrect response and
-	 * later will respond incorrectly to Configuration read coming
-	 * from another device.
-	 *
-	 * The work around is that when doing a PCI Scan one
-	 * should skip its own device number in the scan.
-	 *
-	 * The top IDsel is AD13 and the middle is AD14.
-	 *
-	 * -- Note from force
-	 */
-
-	if ((bus == 0) && (PCI_SLOT(devfn) == 13 || PCI_SLOT(devfn) == 14)) {
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-	else {
-		return PCIBIOS_SUCCESSFUL;
-	}
-}
-
-void __init
-powerpmc250_find_bridges(void)
-{
-	struct pci_controller* hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose){
-		printk("Can't allocate PCI 'hose' structure!!!\n");
-		return;
-	}
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	if (mpc10x_bridge_init(hose,
-			MPC10X_MEM_MAP_B,
-			MPC10X_MEM_MAP_B,
-			MPC10X_MAPB_EUMB_BASE) == 0) {
-
-		hose->mem_resources[0].end = 0xffffffff;
-
-		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-		/* ppc_md.pcibios_fixup = pcore_pcibios_fixup; */
-		ppc_md.pci_swizzle = common_swizzle;
-
-		ppc_md.pci_exclude_device = powerpmc250_exclude_device;
-		ppc_md.pci_map_irq = powerpmc250_map_irq;
-	} else {
-		if (ppc_md.progress)
-			ppc_md.progress("Bridge init failed", 0x100);
-		printk("Host bridge init failed\n");
-	}
-
-}
diff --git a/arch/ppc/platforms/powerpmc250.h b/arch/ppc/platforms/powerpmc250.h
deleted file mode 100644
index d33ad8dc0439..000000000000
--- a/arch/ppc/platforms/powerpmc250.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * arch/ppc/platforms/powerpmc250.h
- *
- * Definitions for Force PowerPMC-250 board support
- *
- * Author: Troy Benjegerdes <tbenjegerdes@mvista.com>
- *
- * Borrowed heavily from prpmc750.h by Matt Porter <mporter@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __ASMPPC_POWERPMC250_H
-#define __ASMPPC_POWERPMC250_H
-
-#define POWERPMC250_PCI_CONFIG_ADDR	0x80000cf8
-#define POWERPMC250_PCI_CONFIG_DATA	0x80000cfc
-
-#define POWERPMC250_PCI_PHY_MEM_BASE	0xc0000000
-#define POWERPMC250_PCI_MEM_BASE		0xf0000000
-#define POWERPMC250_PCI_IO_BASE		0x80000000
-
-#define POWERPMC250_ISA_IO_BASE		POWERPMC250_PCI_IO_BASE
-#define POWERPMC250_ISA_MEM_BASE		POWERPMC250_PCI_MEM_BASE
-#define POWERPMC250_PCI_MEM_OFFSET		POWERPMC250_PCI_PHY_MEM_BASE
-
-#define POWERPMC250_SYS_MEM_BASE		0x80000000
-
-#define POWERPMC250_HAWK_SMC_BASE		0xfef80000
-
-#define POWERPMC250_BASE_BAUD		12288000
-#define POWERPMC250_SERIAL		0xff000000
-#define POWERPMC250_SERIAL_IRQ		20
-
-/* UART Defines. */
-#define RS_TABLE_SIZE  1
-
-#define BASE_BAUD  (POWERPMC250_BASE_BAUD / 16)
-
-#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
-
-#define SERIAL_PORT_DFNS \
-	{ 0, BASE_BAUD, POWERPMC250_SERIAL, POWERPMC250_SERIAL_IRQ,	\
-		STD_COM_FLAGS, 				/* ttyS0 */	\
-		iomem_base: (u8 *)POWERPMC250_SERIAL,			\
-		iomem_reg_shift: 0,					\
-		io_type: SERIAL_IO_MEM }
-
-#endif /* __ASMPPC_POWERPMC250_H */
diff --git a/arch/ppc/platforms/pplus.c b/arch/ppc/platforms/pplus.c
deleted file mode 100644
index cbcac85c7a78..000000000000
--- a/arch/ppc/platforms/pplus.c
+++ /dev/null
@@ -1,844 +0,0 @@
-/*
- * Board and PCI setup routines for MCG PowerPlus
- *
- * Author: Randy Vinson <rvinson@mvista.com>
- *
- * Derived from original PowerPlus PReP work by
- * Cort Dougan, Johnnie Peters, Matt Porter, and
- * Troy Benjegerdes.
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/console.h>
-#include <linux/pci.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/dma.h>
-#include <asm/machdep.h>
-#include <asm/prep_nvram.h>
-#include <asm/vga.h>
-#include <asm/i8259.h>
-#include <asm/open_pic.h>
-#include <asm/hawk.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/kgdb.h>
-#include <asm/reg.h>
-
-#include "pplus.h"
-
-#undef DUMP_DBATS
-
-TODC_ALLOC();
-
-extern void pplus_setup_hose(void);
-extern void pplus_set_VIA_IDE_native(void);
-
-extern unsigned long loops_per_jiffy;
-unsigned char *Motherboard_map_name;
-
-/* Tables for known hardware */
-
-/* Motorola Mesquite */
-static inline int
-mesquite_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet 0 */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{19, 19, 19, 19},	/* IDSEL 16 - PMC Slot 1 */
-		{ 0,  0,  0,  0},	/* IDSEL 17 - unused */
-		{ 0,  0,  0,  0},	/* IDSEL 18 - unused */
-		{ 0,  0,  0,  0},	/* IDSEL 19 - unused */
-		{24, 25, 26, 27},	/* IDSEL 20 - P2P bridge (to cPCI 1) */
-		{ 0,  0,  0,  0},	/* IDSEL 21 - unused */
-		{28, 29, 30, 31}	/* IDSEL 22 - P2P bridge (to cPCI 2) */
-	};
-
-	const long min_idsel = 14, max_idsel = 22, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-/* Motorola Sitka */
-static inline int
-sitka_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet 0 */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{25, 26, 27, 28},	/* IDSEL 16 - PMC Slot 1 */
-		{28, 25, 26, 27},	/* IDSEL 17 - PMC Slot 2 */
-		{ 0,  0,  0,  0},	/* IDSEL 18 - unused */
-		{ 0,  0,  0,  0},	/* IDSEL 19 - unused */
-		{20,  0,  0,  0}	/* IDSEL 20 - P2P bridge (to cPCI) */
-	};
-
-	const long min_idsel = 14, max_idsel = 20, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-/* Motorola MTX */
-static inline int
-MTX_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{19,  0,  0,  0},	/* IDSEL 12 - SCSI   */
-		{ 0,  0,  0,  0},	/* IDSEL 13 - unused */
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet   */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{25, 26, 27, 28},	/* IDSEL 16 - PMC Slot 1 */
-		{26, 27, 28, 25},	/* IDSEL 17 - PMC Slot 2 */
-		{27, 28, 25, 26}	/* IDSEL 18 - PCI Slot 3 */
-	};
-
-	const long min_idsel = 12, max_idsel = 18, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-/* Motorola MTX Plus */
-/* Secondary bus interrupt routing is not supported yet */
-static inline int
-MTXplus_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{19,  0,  0,  0},	/* IDSEL 12 - SCSI   */
-		{ 0,  0,  0,  0},	/* IDSEL 13 - unused */
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet 1 */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{25, 26, 27, 28},	/* IDSEL 16 - PCI Slot 1P */
-		{26, 27, 28, 25},	/* IDSEL 17 - PCI Slot 2P */
-		{27, 28, 25, 26},	/* IDSEL 18 - PCI Slot 3P */
-		{26,  0,  0,  0},	/* IDSEL 19 - Enet 2 */
-		{ 0,  0,  0,  0}	/* IDSEL 20 - P2P Bridge */
-	};
-
-	const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static inline int
-Genesis2_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	/* 2600
-	 * Raven 31
-	 * ISA   11
-	 * SCSI  12 - IRQ3
-	 * Univ  13
-	 * eth   14 - IRQ2
-	 * VGA   15 - IRQ4
-	 * PMC1  16 - IRQ9,10,11,12 = PMC1 A-D
-	 * PMC2  17 - IRQ12,9,10,11 = A-D
-	 * SCSI2 18 - IRQ11
-	 * eth2  19 - IRQ10
-	 * PCIX  20 - IRQ9,10,11,12 = PCI A-D
-	 */
-
-	/* 2400
-	 * Hawk 31
-	 * ISA  11
-	 * Univ 13
-	 * eth  14 - IRQ2
-	 * PMC1 16 - IRQ9,10,11,12 = PMC A-D
-	 * PMC2 17 - IRQ12,9,10,11 = PMC A-D
-	 * PCIX 20 - IRQ9,10,11,12 = PMC A-D
-	 */
-
-	/* 2300
-	 * Raven 31
-	 * ISA   11
-	 * Univ  13
-	 * eth   14 - IRQ2
-	 * PMC1  16 - 9,10,11,12 = A-D
-	 * PMC2  17 - 9,10,11,12 = B,C,D,A
-	 */
-
-	static char pci_irq_table[][4] =
-	    /*
-	     *      MPIC interrupts for various IDSEL values (MPIC IRQ0 =
-	     *      Linux IRQ16 (to leave room for ISA IRQs at 0-15).
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{19,  0,  0,  0},	/* IDSEL 12 - SCSI   */
-		{ 0,  0,  0,  0},	/* IDSEL 13 - Universe PCI - VME */
-		{18,  0,  0,  0},	/* IDSEL 14 - Enet 1 */
-		{ 0,  0,  0,  0},	/* IDSEL 15 - unused */
-		{25, 26, 27, 28},	/* IDSEL 16 - PCI/PMC Slot 1P */
-		{28, 25, 26, 27},	/* IDSEL 17 - PCI/PMC Slot 2P */
-		{27, 28, 25, 26},	/* IDSEL 18 - PCI Slot 3P */
-		{26,  0,  0,  0},	/* IDSEL 19 - Enet 2 */
-		{25, 26, 27, 28}	/* IDSEL 20 - P2P Bridge */
-	};
-
-	const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-#define MOTOROLA_CPUTYPE_REG	0x800
-#define MOTOROLA_BASETYPE_REG	0x803
-#define MPIC_RAVEN_ID		0x48010000
-#define	MPIC_HAWK_ID		0x48030000
-#define	MOT_PROC2_BIT		0x800
-
-static u_char pplus_openpic_initsenses[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* MVME2600_INT_SIO */
-	(IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_FALCN_ECC_ERR */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_ETHERNET */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_SCSI */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_GRAPHICS */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTA */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTB */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTC */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTD */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG0 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),
-};
-
-int mot_entry = -1;
-int prep_keybd_present = 1;
-int mot_multi = 0;
-
-struct brd_info {
-	/* 0x100 mask assumes for Raven and Hawk boards that the level/edge
-	 * are set */
-	int cpu_type;
-	/* 0x200 if this board has a Hawk chip. */
-	int base_type;
-	/* or'ed with 0x80 if this board should be checked for multi CPU */
-	int max_cpu;
-	const char *name;
-	int (*map_irq) (struct pci_dev *, unsigned char, unsigned char);
-};
-struct brd_info mot_info[] = {
-	{0x300, 0x00, 0x00, "MVME 2400", Genesis2_map_irq},
-	{0x1E0, 0xE0, 0x00, "Mesquite cPCI (MCP750)", mesquite_map_irq},
-	{0x1E0, 0xE1, 0x00, "Sitka cPCI (MCPN750)", sitka_map_irq},
-	{0x1E0, 0xE2, 0x00, "Mesquite cPCI (MCP750) w/ HAC", mesquite_map_irq},
-	{0x1E0, 0xF6, 0x80, "MTX Plus", MTXplus_map_irq},
-	{0x1E0, 0xF6, 0x81, "Dual MTX Plus", MTXplus_map_irq},
-	{0x1E0, 0xF7, 0x80, "MTX wo/ Parallel Port", MTX_map_irq},
-	{0x1E0, 0xF7, 0x81, "Dual MTX wo/ Parallel Port", MTX_map_irq},
-	{0x1E0, 0xF8, 0x80, "MTX w/ Parallel Port", MTX_map_irq},
-	{0x1E0, 0xF8, 0x81, "Dual MTX w/ Parallel Port", MTX_map_irq},
-	{0x1E0, 0xF9, 0x00, "MVME 2300", Genesis2_map_irq},
-	{0x1E0, 0xFA, 0x00, "MVME 2300SC/2600", Genesis2_map_irq},
-	{0x1E0, 0xFB, 0x00, "MVME 2600 with MVME712M", Genesis2_map_irq},
-	{0x1E0, 0xFC, 0x00, "MVME 2600/2700 with MVME761", Genesis2_map_irq},
-	{0x1E0, 0xFD, 0x80, "MVME 3600 with MVME712M", Genesis2_map_irq},
-	{0x1E0, 0xFD, 0x81, "MVME 4600 with MVME712M", Genesis2_map_irq},
-	{0x1E0, 0xFE, 0x80, "MVME 3600 with MVME761", Genesis2_map_irq},
-	{0x1E0, 0xFE, 0x81, "MVME 4600 with MVME761", Genesis2_map_irq},
-	{0x000, 0x00, 0x00, "", NULL}
-};
-
-void __init pplus_set_board_type(void)
-{
-	unsigned char cpu_type;
-	unsigned char base_mod;
-	int entry;
-	unsigned short devid;
-	unsigned long *ProcInfo = NULL;
-
-	cpu_type = inb(MOTOROLA_CPUTYPE_REG) & 0xF0;
-	base_mod = inb(MOTOROLA_BASETYPE_REG);
-	early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid);
-
-	for (entry = 0; mot_info[entry].cpu_type != 0; entry++) {
-		/* Check for Hawk chip */
-		if (mot_info[entry].cpu_type & 0x200) {
-			if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK)
-				continue;
-		} else {
-			/* store the system config register for later use. */
-			ProcInfo =
-			    (unsigned long *)ioremap(PPLUS_SYS_CONFIG_REG, 4);
-
-			/* Check non hawk boards */
-			if ((mot_info[entry].cpu_type & 0xff) != cpu_type)
-				continue;
-
-			if (mot_info[entry].base_type == 0) {
-				mot_entry = entry;
-				break;
-			}
-
-			if (mot_info[entry].base_type != base_mod)
-				continue;
-		}
-
-		if (!(mot_info[entry].max_cpu & 0x80)) {
-			mot_entry = entry;
-			break;
-		}
-
-		/* processor 1 not present and max processor zero indicated */
-		if ((*ProcInfo & MOT_PROC2_BIT)
-		    && !(mot_info[entry].max_cpu & 0x7f)) {
-			mot_entry = entry;
-			break;
-		}
-
-		/* processor 1 present and max processor zero indicated */
-		if (!(*ProcInfo & MOT_PROC2_BIT)
-		    && (mot_info[entry].max_cpu & 0x7f)) {
-			mot_entry = entry;
-			break;
-		}
-
-		/* Indicate to system if this is a multiprocessor board */
-		if (!(*ProcInfo & MOT_PROC2_BIT))
-			mot_multi = 1;
-	}
-
-	if (mot_entry == -1)
-		/* No particular cpu type found - assume Mesquite (MCP750) */
-		mot_entry = 1;
-
-	Motherboard_map_name = (unsigned char *)mot_info[mot_entry].name;
-	ppc_md.pci_map_irq = mot_info[mot_entry].map_irq;
-}
-void __init pplus_pib_init(void)
-{
-	unsigned char reg;
-	unsigned short short_reg;
-
-	struct pci_dev *dev = NULL;
-
-	/*
-	 * Perform specific configuration for the Via Tech or
-	 * or Winbond PCI-ISA-Bridge part.
-	 */
-	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-				   PCI_DEVICE_ID_VIA_82C586_1, dev))) {
-		/*
-		 * PPCBUG does not set the enable bits
-		 * for the IDE device. Force them on here.
-		 */
-		pci_read_config_byte(dev, 0x40, &reg);
-
-		reg |= 0x03;	/* IDE: Chip Enable Bits */
-		pci_write_config_byte(dev, 0x40, reg);
-	}
-
-	if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-				   PCI_DEVICE_ID_VIA_82C586_2,
-				   dev)) && (dev->devfn = 0x5a)) {
-		/* Force correct USB interrupt */
-		dev->irq = 11;
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-	}
-
-	if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
-				   PCI_DEVICE_ID_WINBOND_83C553, dev))) {
-		/* Clear PCI Interrupt Routing Control Register. */
-		short_reg = 0x0000;
-		pci_write_config_word(dev, 0x44, short_reg);
-		/* Route IDE interrupts to IRQ 14 */
-		reg = 0xEE;
-		pci_write_config_byte(dev, 0x43, reg);
-	}
-
-	if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
-				   PCI_DEVICE_ID_WINBOND_82C105, dev))) {
-		/*
-		 * Disable LEGIRQ mode so PCI INTS are routed
-		 * directly to the 8259 and enable both channels
-		 */
-		pci_write_config_dword(dev, 0x40, 0x10ff0033);
-
-		/* Force correct IDE interrupt */
-		dev->irq = 14;
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-	}
-	pci_dev_put(dev);
-}
-
-void __init pplus_set_VIA_IDE_legacy(void)
-{
-	unsigned short vend, dev;
-
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
-
-	if ((vend == PCI_VENDOR_ID_VIA) &&
-			(dev == PCI_DEVICE_ID_VIA_82C586_1)) {
-		unsigned char temp;
-
-		/* put back original "standard" port base addresses */
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_0, 0x1f1);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_1, 0x3f5);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_2, 0x171);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_3, 0x375);
-		early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1),
-					 PCI_BASE_ADDRESS_4, 0xcc01);
-
-		/* put into legacy mode */
-		early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-				       &temp);
-		temp &= ~0x05;
-		early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-					temp);
-	}
-}
-
-void pplus_set_VIA_IDE_native(void)
-{
-	unsigned short vend, dev;
-
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend);
-	early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev);
-
-	if ((vend == PCI_VENDOR_ID_VIA) &&
-			(dev == PCI_DEVICE_ID_VIA_82C586_1)) {
-		unsigned char temp;
-
-		/* put into native mode */
-		early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-				       &temp);
-		temp |= 0x05;
-		early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG,
-					temp);
-	}
-}
-
-void __init pplus_pcibios_fixup(void)
-{
-
-	unsigned char reg;
-	unsigned short devid;
-	unsigned char base_mod;
-
-	printk(KERN_INFO "Setting PCI interrupts for a \"%s\"\n",
-			Motherboard_map_name);
-
-	/* Setup the Winbond or Via PIB */
-	pplus_pib_init();
-
-	/* Set up floppy in PS/2 mode */
-	outb(0x09, SIO_CONFIG_RA);
-	reg = inb(SIO_CONFIG_RD);
-	reg = (reg & 0x3F) | 0x40;
-	outb(reg, SIO_CONFIG_RD);
-	outb(reg, SIO_CONFIG_RD);	/* Have to write twice to change! */
-
-	/* This is a hack.  If this is a 2300 or 2400 mot board then there is
-	 * no keyboard controller and we have to indicate that.
-	 */
-
-	early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid);
-	base_mod = inb(MOTOROLA_BASETYPE_REG);
-	if ((devid == PCI_DEVICE_ID_MOTOROLA_HAWK) ||
-	    (base_mod == 0xF9) || (base_mod == 0xFA) || (base_mod == 0xE1))
-		prep_keybd_present = 0;
-}
-
-void __init pplus_find_bridges(void)
-{
-	struct pci_controller *hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	hose->pci_mem_offset = PREP_ISA_MEM_BASE;
-	hose->io_base_virt = (void *)PREP_ISA_IO_BASE;
-
-	pci_init_resource(&hose->io_resource, PPLUS_PCI_IO_START,
-			  PPLUS_PCI_IO_END, IORESOURCE_IO, "PCI host bridge");
-	pci_init_resource(&hose->mem_resources[0], PPLUS_PROC_PCI_MEM_START,
-			  PPLUS_PROC_PCI_MEM_END, IORESOURCE_MEM,
-			  "PCI host bridge");
-
-	hose->io_space.start = PPLUS_PCI_IO_START;
-	hose->io_space.end = PPLUS_PCI_IO_END;
-	hose->mem_space.start = PPLUS_PCI_MEM_START;
-	hose->mem_space.end = PPLUS_PCI_MEM_END - HAWK_MPIC_SIZE;
-
-	if (hawk_init(hose, PPLUS_HAWK_PPC_REG_BASE, PPLUS_PROC_PCI_MEM_START,
-				PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE,
-				PPLUS_PROC_PCI_IO_START, PPLUS_PROC_PCI_IO_END,
-				PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE + 1)
-			!= 0) {
-		printk(KERN_CRIT "Could not initialize host bridge\n");
-
-	}
-
-	pplus_set_VIA_IDE_legacy();
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pcibios_fixup = pplus_pcibios_fixup;
-	ppc_md.pci_swizzle = common_swizzle;
-}
-
-static int pplus_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: Motorola MCG\n");
-	seq_printf(m, "machine\t\t: %s\n", Motherboard_map_name);
-
-	return 0;
-}
-
-static void __init pplus_setup_arch(void)
-{
-	struct pci_controller *hose;
-
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_setup_arch: enter", 0);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000;
-
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_setup_arch: find_bridges", 0);
-
-	/* Setup PCI host bridge */
-	pplus_find_bridges();
-
-	hose = pci_bus_to_hose(0);
-	isa_io_base = (ulong) hose->io_base_virt;
-
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_setup_arch: set_board_type", 0);
-
-	pplus_set_board_type();
-
-	/* Enable L2.  Assume we don't need to flush -- Cort */
-	*(unsigned char *)(PPLUS_L2_CONTROL_REG) |= 3;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	printk(KERN_INFO "Motorola PowerPlus Platform\n");
-	printk(KERN_INFO
-	       "Port by MontaVista Software, Inc. (source@mvista.com)\n");
-
-#ifdef CONFIG_VGA_CONSOLE
-	/* remap the VGA memory */
-	vgacon_remap_base = (unsigned long)ioremap(PPLUS_ISA_MEM_BASE,
-						   0x08000000);
-	conswitchp = &vga_con;
-#endif
-#ifdef CONFIG_PPCBUG_NVRAM
-	/* Read in NVRAM data */
-	init_prep_nvram();
-
-	/* if no bootargs, look in NVRAM */
-	if (cmd_line[0] == '\0') {
-		char *bootargs;
-		bootargs = prep_nvram_get_var("bootargs");
-		if (bootargs != NULL) {
-			strcpy(cmd_line, bootargs);
-			/* again.. */
-			strcpy(boot_command_line, cmd_line);
-		}
-	}
-#endif
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_setup_arch: exit", 0);
-}
-
-static void pplus_restart(char *cmd)
-{
-	unsigned long i = 10000;
-
-	local_irq_disable();
-
-	/* set VIA IDE controller into native mode */
-	pplus_set_VIA_IDE_native();
-
-	/* set exception prefix high - to the prom */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	/* make sure bit 0 (reset) is a 0 */
-	outb(inb(0x92) & ~1L, 0x92);
-	/* signal a reset to system control port A - soft reset */
-	outb(inb(0x92) | 1, 0x92);
-
-	while (i != 0)
-		i++;
-	panic("restart failed\n");
-}
-
-static void pplus_halt(void)
-{
-	/* set exception prefix high - to the prom */
-	_nmask_and_or_msr(MSR_EE, MSR_IP);
-
-	/* make sure bit 0 (reset) is a 0 */
-	outb(inb(0x92) & ~1L, 0x92);
-	/* signal a reset to system control port A - soft reset */
-	outb(inb(0x92) | 1, 0x92);
-
-	while (1) ;
-	/*
-	 * Not reached
-	 */
-}
-
-static void pplus_power_off(void)
-{
-	pplus_halt();
-}
-
-static void __init pplus_init_IRQ(void)
-{
-	int i;
-
-	if (ppc_md.progress)
-		ppc_md.progress("init_irq: enter", 0);
-
-	OpenPIC_InitSenses = pplus_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(pplus_openpic_initsenses);
-
-	if (OpenPIC_Addr != NULL) {
-
-		openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000);
-		openpic_init(NUM_8259_INTERRUPTS);
-		openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
-					i8259_irq);
-		ppc_md.get_irq = openpic_get_irq;
-	}
-
-	i8259_init(0, 0);
-
-	if (ppc_md.progress)
-		ppc_md.progress("init_irq: exit", 0);
-}
-
-#ifdef CONFIG_SMP
-/* PowerPlus (MTX) support */
-static int __init smp_pplus_probe(void)
-{
-	extern int mot_multi;
-
-	if (mot_multi) {
-		openpic_request_IPIs();
-		smp_hw_index[1] = 1;
-		return 2;
-	}
-
-	return 1;
-}
-
-static void __init smp_pplus_kick_cpu(int nr)
-{
-	*(unsigned long *)KERNELBASE = nr;
-	asm volatile ("dcbf 0,%0"::"r" (KERNELBASE):"memory");
-	printk(KERN_INFO "CPU1 reset, waiting\n");
-}
-
-static void __init smp_pplus_setup_cpu(int cpu_nr)
-{
-	if (OpenPIC_Addr)
-		do_openpic_setup_cpu();
-}
-
-static struct smp_ops_t pplus_smp_ops = {
-	smp_openpic_message_pass,
-	smp_pplus_probe,
-	smp_pplus_kick_cpu,
-	smp_pplus_setup_cpu,
-	.give_timebase = smp_generic_give_timebase,
-	.take_timebase = smp_generic_take_timebase,
-};
-#endif				/* CONFIG_SMP */
-
-#ifdef DUMP_DBATS
-static void print_dbat(int idx, u32 bat)
-{
-
-	char str[64];
-
-	sprintf(str, "DBAT%c%c = 0x%08x\n",
-		(char)((idx - DBAT0U) / 2) + '0', (idx & 1) ? 'L' : 'U', bat);
-	ppc_md.progress(str, 0);
-}
-
-#define DUMP_DBAT(x) \
-	do { \
-	u32 __temp = mfspr(x);\
-	print_dbat(x, __temp); \
-	} while (0)
-
-static void dump_dbats(void)
-{
-	if (ppc_md.progress) {
-		DUMP_DBAT(DBAT0U);
-		DUMP_DBAT(DBAT0L);
-		DUMP_DBAT(DBAT1U);
-		DUMP_DBAT(DBAT1L);
-		DUMP_DBAT(DBAT2U);
-		DUMP_DBAT(DBAT2L);
-		DUMP_DBAT(DBAT3U);
-		DUMP_DBAT(DBAT3L);
-	}
-}
-#endif
-
-static unsigned long __init pplus_find_end_of_memory(void)
-{
-	unsigned long total;
-
-	if (ppc_md.progress)
-		ppc_md.progress("pplus_find_end_of_memory", 0);
-
-#ifdef DUMP_DBATS
-	dump_dbats();
-#endif
-
-	total = hawk_get_mem_size(PPLUS_HAWK_SMC_BASE);
-	return (total);
-}
-
-static void __init pplus_map_io(void)
-{
-	io_block_mapping(PPLUS_ISA_IO_BASE, PPLUS_ISA_IO_BASE, 0x10000000,
-			 _PAGE_IO);
-	io_block_mapping(0xfef80000, 0xfef80000, 0x00080000, _PAGE_IO);
-}
-
-static void __init pplus_init2(void)
-{
-#ifdef CONFIG_NVRAM
-	request_region(PREP_NVRAM_AS0, 0x8, "nvram");
-#endif
-	request_region(0x20, 0x20, "pic1");
-	request_region(0xa0, 0x20, "pic2");
-	request_region(0x00, 0x20, "dma1");
-	request_region(0x40, 0x20, "timer");
-	request_region(0x80, 0x10, "dma page reg");
-	request_region(0xc0, 0x20, "dma2");
-}
-
-/*
- * Set BAT 2 to access 0x8000000 so progress messages will work and set BAT 3
- * to 0xf0000000 to access Falcon/Raven or Hawk registers
- */
-static __inline__ void pplus_set_bat(void)
-{
-	/* wait for all outstanding memory accesses to complete */
-	mb();
-
-	/* setup DBATs */
-	mtspr(SPRN_DBAT2U, 0x80001ffe);
-	mtspr(SPRN_DBAT2L, 0x8000002a);
-	mtspr(SPRN_DBAT3U, 0xf0001ffe);
-	mtspr(SPRN_DBAT3L, 0xf000002a);
-
-	/* wait for updates */
-	mb();
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* Map in board regs, etc. */
-	pplus_set_bat();
-
-	isa_io_base = PREP_ISA_IO_BASE;
-	isa_mem_base = PREP_ISA_MEM_BASE;
-	pci_dram_offset = PREP_PCI_DRAM_OFFSET;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-	ppc_do_canonicalize_irqs = 1;
-
-	ppc_md.setup_arch = pplus_setup_arch;
-	ppc_md.show_cpuinfo = pplus_show_cpuinfo;
-	ppc_md.init_IRQ = pplus_init_IRQ;
-	/* this gets changed later on if we have an OpenPIC -- Cort */
-	ppc_md.get_irq = i8259_irq;
-	ppc_md.init = pplus_init2;
-
-	ppc_md.restart = pplus_restart;
-	ppc_md.power_off = pplus_power_off;
-	ppc_md.halt = pplus_halt;
-
-	TODC_INIT(TODC_TYPE_MK48T59, PREP_NVRAM_AS0, PREP_NVRAM_AS1,
-		  PREP_NVRAM_DATA, 8);
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-	ppc_md.nvram_read_val = todc_m48txx_read_val;
-	ppc_md.nvram_write_val = todc_m48txx_write_val;
-
-	ppc_md.find_end_of_memory = pplus_find_end_of_memory;
-	ppc_md.setup_io_mappings = pplus_map_io;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif				/* CONFIG_SERIAL_TEXT_DEBUG */
-#ifdef CONFIG_KGDB
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-#ifdef CONFIG_SMP
-	smp_ops = &pplus_smp_ops;
-#endif				/* CONFIG_SMP */
-}
diff --git a/arch/ppc/platforms/pplus.h b/arch/ppc/platforms/pplus.h
deleted file mode 100644
index a4bbaa8d858f..000000000000
--- a/arch/ppc/platforms/pplus.h
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Definitions for Motorola MCG Falcon/Raven & HAWK North Bridge & Memory ctlr.
- *
- * Author: Mark A. Greerinclude/asm-ppc/hawk.h
- *         mgreer@mvista.com
- *
- * Modified by Randy Vinson (rvinson@mvista.com)
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifndef __PPC_PPLUS_H
-#define __PPC_PPLUS_H
-
-#include <asm/io.h>
-
-/*
- * Due to limitations imposed by legacy hardware (primarily IDE controllers),
- * the PPLUS boards operate using a PReP address map.
- *
- * From Processor (physical) -> PCI:
- *   PCI Mem Space: 0xc0000000 - 0xfe000000 -> 0x00000000 - 0x3e000000 (768 MB)
- *   PCI I/O Space: 0x80000000 - 0x90000000 -> 0x00000000 - 0x10000000 (256 MB)
- *	Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area
- *
- * From PCI -> Processor (physical):
- *   System Memory: 0x80000000 -> 0x00000000
- */
-
-#define PPLUS_ISA_MEM_BASE		PREP_ISA_MEM_BASE
-#define PPLUS_ISA_IO_BASE		PREP_ISA_IO_BASE
-
-/* PCI Memory space mapping info */
-#define PPLUS_PCI_MEM_SIZE		0x30000000U
-#define PPLUS_PROC_PCI_MEM_START	PPLUS_ISA_MEM_BASE
-#define PPLUS_PROC_PCI_MEM_END		(PPLUS_PROC_PCI_MEM_START +	\
-					 PPLUS_PCI_MEM_SIZE - 1)
-#define PPLUS_PCI_MEM_START		0x00000000U
-#define PPLUS_PCI_MEM_END		(PPLUS_PCI_MEM_START +	\
-					 PPLUS_PCI_MEM_SIZE - 1)
-
-/* PCI I/O space mapping info */
-#define PPLUS_PCI_IO_SIZE		0x10000000U
-#define PPLUS_PROC_PCI_IO_START		PPLUS_ISA_IO_BASE
-#define PPLUS_PROC_PCI_IO_END		(PPLUS_PROC_PCI_IO_START +	\
-					 PPLUS_PCI_IO_SIZE - 1)
-#define PPLUS_PCI_IO_START		0x00000000U
-#define PPLUS_PCI_IO_END		(PPLUS_PCI_IO_START + 	\
-					 PPLUS_PCI_IO_SIZE - 1)
-/* System memory mapping info */
-#define PPLUS_PCI_DRAM_OFFSET		PREP_PCI_DRAM_OFFSET
-#define PPLUS_PCI_PHY_MEM_OFFSET	(PPLUS_ISA_MEM_BASE-PPLUS_PCI_MEM_START)
-
-/* Define base addresses for important sets of registers */
-#define PPLUS_HAWK_SMC_BASE		0xfef80000U
-#define PPLUS_HAWK_PPC_REG_BASE		0xfeff0000U
-#define PPLUS_SYS_CONFIG_REG		0xfef80400U
-#define PPLUS_L2_CONTROL_REG		0x8000081cU
-
-#define PPLUS_VGA_MEM_BASE		0xf0000000U
-
-#endif	/* __PPC_PPLUS_H */
diff --git a/arch/ppc/platforms/prep_pci.c b/arch/ppc/platforms/prep_pci.c
deleted file mode 100644
index 8ed433e2a5c7..000000000000
--- a/arch/ppc/platforms/prep_pci.c
+++ /dev/null
@@ -1,1339 +0,0 @@
-/*
- * PReP pci functions.
- * Originally by Gary Thomas
- * rewritten and updated by Cort Dougan (cort@cs.nmt.edu)
- *
- * The motherboard routes/maps will disappear shortly. -- Cort
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/sections.h>
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/ptrace.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/residual.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/open_pic.h>
-
-extern void (*setup_ibm_pci)(char *irq_lo, char *irq_hi);
-
-/* Which PCI interrupt line does a given device [slot] use? */
-/* Note: This really should be two dimensional based in slot/pin used */
-static unsigned char *Motherboard_map;
-unsigned char *Motherboard_map_name;
-
-/* How is the 82378 PIRQ mapping setup? */
-static unsigned char *Motherboard_routes;
-
-static void (*Motherboard_non0)(struct pci_dev *);
-
-static void Powerplus_Map_Non0(struct pci_dev *);
-
-/* Used for Motorola to store system config register */
-static unsigned long	*ProcInfo;
-
-/* Tables for known hardware */
-
-/* Motorola PowerStackII - Utah */
-static char Utah_pci_IRQ_map[23] =
-{
-        0,   /* Slot 0  - unused */
-        0,   /* Slot 1  - unused */
-        5,   /* Slot 2  - SCSI - NCR825A  */
-        0,   /* Slot 3  - unused */
-        3,   /* Slot 4  - Ethernet - DEC2114x */
-        0,   /* Slot 5  - unused */
-        2,   /* Slot 6  - PCI Card slot #1 */
-        3,   /* Slot 7  - PCI Card slot #2 */
-        5,   /* Slot 8  - PCI Card slot #3 */
-        5,   /* Slot 9  - PCI Bridge */
-             /* added here in case we ever support PCI bridges */
-             /* Secondary PCI bus cards are at slot-9,6 & slot-9,7 */
-        0,   /* Slot 10 - unused */
-        0,   /* Slot 11 - unused */
-        5,   /* Slot 12 - SCSI - NCR825A */
-        0,   /* Slot 13 - unused */
-        3,   /* Slot 14 - enet */
-        0,   /* Slot 15 - unused */
-        2,   /* Slot 16 - unused */
-        3,   /* Slot 17 - unused */
-        5,   /* Slot 18 - unused */
-        0,   /* Slot 19 - unused */
-        0,   /* Slot 20 - unused */
-        0,   /* Slot 21 - unused */
-        0,   /* Slot 22 - unused */
-};
-
-static char Utah_pci_IRQ_routes[] =
-{
-        0,   /* Line 0 - Unused */
-        9,   /* Line 1 */
-	10,  /* Line 2 */
-        11,  /* Line 3 */
-        14,  /* Line 4 */
-        15,  /* Line 5 */
-};
-
-/* Motorola PowerStackII - Omaha */
-/* no integrated SCSI or ethernet */
-static char Omaha_pci_IRQ_map[23] =
-{
-        0,   /* Slot 0  - unused */
-        0,   /* Slot 1  - unused */
-        3,   /* Slot 2  - Winbond EIDE */
-        0,   /* Slot 3  - unused */
-        0,   /* Slot 4  - unused */
-        0,   /* Slot 5  - unused */
-        1,   /* Slot 6  - PCI slot 1 */
-        2,   /* Slot 7  - PCI slot 2  */
-        3,   /* Slot 8  - PCI slot 3 */
-        4,   /* Slot 9  - PCI slot 4 */ /* needs indirect access */
-        0,   /* Slot 10 - unused */
-        0,   /* Slot 11 - unused */
-        0,   /* Slot 12 - unused */
-        0,   /* Slot 13 - unused */
-        0,   /* Slot 14 - unused */
-        0,   /* Slot 15 - unused */
-        1,   /* Slot 16  - PCI slot 1 */
-        2,   /* Slot 17  - PCI slot 2  */
-        3,   /* Slot 18  - PCI slot 3 */
-        4,   /* Slot 19  - PCI slot 4 */ /* needs indirect access */
-        0,
-        0,
-        0,
-};
-
-static char Omaha_pci_IRQ_routes[] =
-{
-        0,   /* Line 0 - Unused */
-        9,   /* Line 1 */
-        11,  /* Line 2 */
-        14,  /* Line 3 */
-        15   /* Line 4 */
-};
-
-/* Motorola PowerStack */
-static char Blackhawk_pci_IRQ_map[19] =
-{
-  	0,	/* Slot 0  - unused */
-  	0,	/* Slot 1  - unused */
-  	0,	/* Slot 2  - unused */
-  	0,	/* Slot 3  - unused */
-  	0,	/* Slot 4  - unused */
-  	0,	/* Slot 5  - unused */
-  	0,	/* Slot 6  - unused */
-  	0,	/* Slot 7  - unused */
-  	0,	/* Slot 8  - unused */
-  	0,	/* Slot 9  - unused */
-  	0,	/* Slot 10 - unused */
-  	0,	/* Slot 11 - unused */
-  	3,	/* Slot 12 - SCSI */
-  	0,	/* Slot 13 - unused */
-  	1,	/* Slot 14 - Ethernet */
-  	0,	/* Slot 15 - unused */
- 	1,	/* Slot P7 */
- 	2,	/* Slot P6 */
- 	3,	/* Slot P5 */
-};
-
-static char Blackhawk_pci_IRQ_routes[] =
-{
-   	0,	/* Line 0 - Unused */
-   	9,	/* Line 1 */
-   	11,	/* Line 2 */
-   	15,	/* Line 3 */
-   	15	/* Line 4 */
-};
-
-/* Motorola Mesquite */
-static char Mesquite_pci_IRQ_map[23] =
-{
-	0,	/* Slot 0  - unused */
-	0,	/* Slot 1  - unused */
-	0,	/* Slot 2  - unused */
-	0,	/* Slot 3  - unused */
-	0,	/* Slot 4  - unused */
-	0,	/* Slot 5  - unused */
-	0,	/* Slot 6  - unused */
-	0,	/* Slot 7  - unused */
-	0,	/* Slot 8  - unused */
-	0,	/* Slot 9  - unused */
-	0,	/* Slot 10 - unused */
-	0,	/* Slot 11 - unused */
-	0,	/* Slot 12 - unused */
-	0,	/* Slot 13 - unused */
-	2,	/* Slot 14 - Ethernet */
-	0,	/* Slot 15 - unused */
-	3,	/* Slot 16 - PMC */
-	0,	/* Slot 17 - unused */
-	0,	/* Slot 18 - unused */
-	0,	/* Slot 19 - unused */
-	0,	/* Slot 20 - unused */
-	0,	/* Slot 21 - unused */
-	0,	/* Slot 22 - unused */
-};
-
-/* Motorola Sitka */
-static char Sitka_pci_IRQ_map[21] =
-{
-	0,      /* Slot 0  - unused */
-	0,      /* Slot 1  - unused */
-	0,      /* Slot 2  - unused */
-	0,      /* Slot 3  - unused */
-	0,      /* Slot 4  - unused */
-	0,      /* Slot 5  - unused */
-	0,      /* Slot 6  - unused */
-	0,      /* Slot 7  - unused */
-	0,      /* Slot 8  - unused */
-	0,      /* Slot 9  - unused */
-	0,      /* Slot 10 - unused */
-	0,      /* Slot 11 - unused */
-	0,      /* Slot 12 - unused */
-	0,      /* Slot 13 - unused */
-	2,      /* Slot 14 - Ethernet */
-	0,      /* Slot 15 - unused */
-	9,      /* Slot 16 - PMC 1  */
-	12,     /* Slot 17 - PMC 2  */
-	0,      /* Slot 18 - unused */
-	0,      /* Slot 19 - unused */
-	4,      /* Slot 20 - NT P2P bridge */
-};
-
-/* Motorola MTX */
-static char MTX_pci_IRQ_map[23] =
-{
-	0,	/* Slot 0  - unused */
-	0,	/* Slot 1  - unused */
-	0,	/* Slot 2  - unused */
-	0,	/* Slot 3  - unused */
-	0,	/* Slot 4  - unused */
-	0,	/* Slot 5  - unused */
-	0,	/* Slot 6  - unused */
-	0,	/* Slot 7  - unused */
-	0,	/* Slot 8  - unused */
-	0,	/* Slot 9  - unused */
-	0,	/* Slot 10 - unused */
-	0,	/* Slot 11 - unused */
-	3,	/* Slot 12 - SCSI */
-	0,	/* Slot 13 - unused */
-	2,	/* Slot 14 - Ethernet */
-	0,	/* Slot 15 - unused */
-	9,      /* Slot 16 - PCI/PMC slot 1 */
-	10,     /* Slot 17 - PCI/PMC slot 2 */
-	11,     /* Slot 18 - PCI slot 3 */
-	0,	/* Slot 19 - unused */
-	0,	/* Slot 20 - unused */
-	0,	/* Slot 21 - unused */
-	0,	/* Slot 22 - unused */
-};
-
-/* Motorola MTX Plus */
-/* Secondary bus interrupt routing is not supported yet */
-static char MTXplus_pci_IRQ_map[23] =
-{
-        0,      /* Slot 0  - unused */
-        0,      /* Slot 1  - unused */
-        0,      /* Slot 2  - unused */
-        0,      /* Slot 3  - unused */
-        0,      /* Slot 4  - unused */
-        0,      /* Slot 5  - unused */
-        0,      /* Slot 6  - unused */
-        0,      /* Slot 7  - unused */
-        0,      /* Slot 8  - unused */
-        0,      /* Slot 9  - unused */
-        0,      /* Slot 10 - unused */
-        0,      /* Slot 11 - unused */
-        3,      /* Slot 12 - SCSI */
-        0,      /* Slot 13 - unused */
-        2,      /* Slot 14 - Ethernet 1 */
-        0,      /* Slot 15 - unused */
-        9,      /* Slot 16 - PCI slot 1P */
-        10,     /* Slot 17 - PCI slot 2P */
-        11,     /* Slot 18 - PCI slot 3P */
-        10,     /* Slot 19 - Ethernet 2 */
-        0,      /* Slot 20 - P2P Bridge */
-        0,      /* Slot 21 - unused */
-        0,      /* Slot 22 - unused */
-};
-
-static char Raven_pci_IRQ_routes[] =
-{
-   	0,	/* This is a dummy structure */
-};
-
-/* Motorola MVME16xx */
-static char Genesis_pci_IRQ_map[16] =
-{
-  	0,	/* Slot 0  - unused */
-  	0,	/* Slot 1  - unused */
-  	0,	/* Slot 2  - unused */
-  	0,	/* Slot 3  - unused */
-  	0,	/* Slot 4  - unused */
-  	0,	/* Slot 5  - unused */
-  	0,	/* Slot 6  - unused */
-  	0,	/* Slot 7  - unused */
-  	0,	/* Slot 8  - unused */
-  	0,	/* Slot 9  - unused */
-  	0,	/* Slot 10 - unused */
-  	0,	/* Slot 11 - unused */
-  	3,	/* Slot 12 - SCSI */
-  	0,	/* Slot 13 - unused */
-  	1,	/* Slot 14 - Ethernet */
-  	0,	/* Slot 15 - unused */
-};
-
-static char Genesis_pci_IRQ_routes[] =
-{
-   	0,	/* Line 0 - Unused */
-   	10,	/* Line 1 */
-   	11,	/* Line 2 */
-   	14,	/* Line 3 */
-   	15	/* Line 4 */
-};
-
-static char Genesis2_pci_IRQ_map[23] =
-{
-	0,	/* Slot 0  - unused */
-	0,	/* Slot 1  - unused */
-	0,	/* Slot 2  - unused */
-	0,	/* Slot 3  - unused */
-	0,	/* Slot 4  - unused */
-	0,	/* Slot 5  - unused */
-	0,	/* Slot 6  - unused */
-	0,	/* Slot 7  - unused */
-	0,	/* Slot 8  - unused */
-	0,	/* Slot 9  - unused */
-	0,	/* Slot 10 - unused */
-	0,	/* Slot 11 - IDE */
-	3,	/* Slot 12 - SCSI */
-	5,	/* Slot 13 - Universe PCI - VME Bridge */
-	2,	/* Slot 14 - Ethernet */
-	0,	/* Slot 15 - unused */
-	9,	/* Slot 16 - PMC 1 */
-	12,	/* Slot 17 - pci */
-	11,	/* Slot 18 - pci */
-	10,	/* Slot 19 - pci */
-	0,	/* Slot 20 - pci */
-	0,	/* Slot 21 - unused */
-	0,	/* Slot 22 - unused */
-};
-
-/* Motorola Series-E */
-static char Comet_pci_IRQ_map[23] =
-{
-  	0,	/* Slot 0  - unused */
-  	0,	/* Slot 1  - unused */
-  	0,	/* Slot 2  - unused */
-  	0,	/* Slot 3  - unused */
-  	0,	/* Slot 4  - unused */
-  	0,	/* Slot 5  - unused */
-  	0,	/* Slot 6  - unused */
-  	0,	/* Slot 7  - unused */
-  	0,	/* Slot 8  - unused */
-  	0,	/* Slot 9  - unused */
-  	0,	/* Slot 10 - unused */
-  	0,	/* Slot 11 - unused */
-  	3,	/* Slot 12 - SCSI */
-  	0,	/* Slot 13 - unused */
-  	1,	/* Slot 14 - Ethernet */
-  	0,	/* Slot 15 - unused */
-	1,	/* Slot 16 - PCI slot 1 */
-	2,	/* Slot 17 - PCI slot 2 */
-	3,	/* Slot 18 - PCI slot 3 */
-	4,	/* Slot 19 - PCI bridge */
-	0,
-	0,
-	0,
-};
-
-static char Comet_pci_IRQ_routes[] =
-{
-   	0,	/* Line 0 - Unused */
-   	10,	/* Line 1 */
-   	11,	/* Line 2 */
-   	14,	/* Line 3 */
-   	15	/* Line 4 */
-};
-
-/* Motorola Series-EX */
-static char Comet2_pci_IRQ_map[23] =
-{
-	0,	/* Slot 0  - unused */
-	0,	/* Slot 1  - unused */
-	3,	/* Slot 2  - SCSI - NCR825A */
-	0,	/* Slot 3  - unused */
-	1,	/* Slot 4  - Ethernet - DEC2104X */
-	0,	/* Slot 5  - unused */
-	1,	/* Slot 6  - PCI slot 1 */
-	2,	/* Slot 7  - PCI slot 2 */
-	3,	/* Slot 8  - PCI slot 3 */
-	4,	/* Slot 9  - PCI bridge  */
-	0,	/* Slot 10 - unused */
-	0,	/* Slot 11 - unused */
-	3,	/* Slot 12 - SCSI - NCR825A */
-	0,	/* Slot 13 - unused */
-	1,	/* Slot 14 - Ethernet - DEC2104X */
-	0,	/* Slot 15 - unused */
-	1,	/* Slot 16 - PCI slot 1 */
-	2,	/* Slot 17 - PCI slot 2 */
-	3,	/* Slot 18 - PCI slot 3 */
-	4,	/* Slot 19 - PCI bridge */
-	0,
-	0,
-	0,
-};
-
-static char Comet2_pci_IRQ_routes[] =
-{
-	0,	/* Line 0 - Unused */
-	10,	/* Line 1 */
-	11,	/* Line 2 */
-	14,	/* Line 3 */
-	15,	/* Line 4 */
-};
-
-/*
- * ibm 830 (and 850?).
- * This is actually based on the Carolina motherboard
- * -- Cort
- */
-static char ibm8xx_pci_IRQ_map[23] = {
-        0, /* Slot 0  - unused */
-        0, /* Slot 1  - unused */
-        0, /* Slot 2  - unused */
-        0, /* Slot 3  - unused */
-        0, /* Slot 4  - unused */
-        0, /* Slot 5  - unused */
-        0, /* Slot 6  - unused */
-        0, /* Slot 7  - unused */
-        0, /* Slot 8  - unused */
-        0, /* Slot 9  - unused */
-        0, /* Slot 10 - unused */
-        0, /* Slot 11 - FireCoral */
-        4, /* Slot 12 - Ethernet  PCIINTD# */
-        2, /* Slot 13 - PCI Slot #2 */
-        2, /* Slot 14 - S3 Video PCIINTD# */
-        0, /* Slot 15 - onboard SCSI (INDI) [1] */
-        3, /* Slot 16 - NCR58C810 RS6000 Only PCIINTC# */
-        0, /* Slot 17 - unused */
-        2, /* Slot 18 - PCI Slot 2 PCIINTx# (See below) */
-        0, /* Slot 19 - unused */
-        0, /* Slot 20 - unused */
-        0, /* Slot 21 - unused */
-        2, /* Slot 22 - PCI slot 1 PCIINTx# (See below) */
-};
-
-static char ibm8xx_pci_IRQ_routes[] = {
-        0,      /* Line 0 - unused */
-        15,     /* Line 1 */
-        15,     /* Line 2 */
-        15,     /* Line 3 */
-        15,     /* Line 4 */
-};
-
-/*
- * a 6015 ibm board
- * -- Cort
- */
-static char ibm6015_pci_IRQ_map[23] = {
-        0, /* Slot 0  - unused */
-        0, /* Slot 1  - unused */
-        0, /* Slot 2  - unused */
-        0, /* Slot 3  - unused */
-        0, /* Slot 4  - unused */
-        0, /* Slot 5  - unused */
-        0, /* Slot 6  - unused */
-        0, /* Slot 7  - unused */
-        0, /* Slot 8  - unused */
-        0, /* Slot 9  - unused */
-        0, /* Slot 10 - unused */
-        0, /* Slot 11 -  */
-        1, /* Slot 12 - SCSI */
-        2, /* Slot 13 -  */
-        2, /* Slot 14 -  */
-        1, /* Slot 15 -  */
-        1, /* Slot 16 -  */
-        0, /* Slot 17 -  */
-        2, /* Slot 18 -  */
-        0, /* Slot 19 -  */
-        0, /* Slot 20 -  */
-        0, /* Slot 21 -  */
-        2, /* Slot 22 -  */
-};
-
-static char ibm6015_pci_IRQ_routes[] = {
-        0,      /* Line 0 - unused */
-        13,     /* Line 1 */
-        15,     /* Line 2 */
-        15,     /* Line 3 */
-        15,     /* Line 4 */
-};
-
-
-/* IBM Nobis and Thinkpad 850 */
-static char Nobis_pci_IRQ_map[23] ={
-        0, /* Slot 0  - unused */
-        0, /* Slot 1  - unused */
-        0, /* Slot 2  - unused */
-        0, /* Slot 3  - unused */
-        0, /* Slot 4  - unused */
-        0, /* Slot 5  - unused */
-        0, /* Slot 6  - unused */
-        0, /* Slot 7  - unused */
-        0, /* Slot 8  - unused */
-        0, /* Slot 9  - unused */
-        0, /* Slot 10 - unused */
-        0, /* Slot 11 - unused */
-        3, /* Slot 12 - SCSI */
-        0, /* Slot 13 - unused */
-        0, /* Slot 14 - unused */
-        0, /* Slot 15 - unused */
-};
-
-static char Nobis_pci_IRQ_routes[] = {
-        0, /* Line 0 - Unused */
-        13, /* Line 1 */
-        13, /* Line 2 */
-        13, /* Line 3 */
-        13      /* Line 4 */
-};
-
-/*
- * IBM RS/6000 43p/140  -- paulus
- * XXX we should get all this from the residual data
- */
-static char ibm43p_pci_IRQ_map[23] = {
-        0, /* Slot 0  - unused */
-        0, /* Slot 1  - unused */
-        0, /* Slot 2  - unused */
-        0, /* Slot 3  - unused */
-        0, /* Slot 4  - unused */
-        0, /* Slot 5  - unused */
-        0, /* Slot 6  - unused */
-        0, /* Slot 7  - unused */
-        0, /* Slot 8  - unused */
-        0, /* Slot 9  - unused */
-        0, /* Slot 10 - unused */
-        0, /* Slot 11 - FireCoral ISA bridge */
-        6, /* Slot 12 - Ethernet  */
-        0, /* Slot 13 - openpic */
-        0, /* Slot 14 - unused */
-        0, /* Slot 15 - unused */
-        7, /* Slot 16 - NCR58C825a onboard scsi */
-        0, /* Slot 17 - unused */
-        2, /* Slot 18 - PCI Slot 2 PCIINTx# (See below) */
-        0, /* Slot 19 - unused */
-        0, /* Slot 20 - unused */
-        0, /* Slot 21 - unused */
-        1, /* Slot 22 - PCI slot 1 PCIINTx# (See below) */
-};
-
-static char ibm43p_pci_IRQ_routes[] = {
-        0,      /* Line 0 - unused */
-        15,     /* Line 1 */
-        15,     /* Line 2 */
-        15,     /* Line 3 */
-        15,     /* Line 4 */
-};
-
-/* Motorola PowerPlus architecture PCI IRQ tables */
-/* Interrupt line values for INTA-D on primary/secondary MPIC inputs */
-
-struct powerplus_irq_list
-{
-	unsigned char primary[4];       /* INT A-D */
-	unsigned char secondary[4];     /* INT A-D */
-};
-
-/*
- * For standard PowerPlus boards, bus 0 PCI INTs A-D are routed to
- * OpenPIC inputs 9-12.  PCI INTs A-D from the on board P2P bridge
- * are routed to OpenPIC inputs 5-8.  These values are offset by
- * 16 in the table to reflect the Linux kernel interrupt value.
- */
-struct powerplus_irq_list Powerplus_pci_IRQ_list =
-{
-	{25, 26, 27, 28},
-	{21, 22, 23, 24}
-};
-
-/*
- * For the MCP750 (system slot board), cPCI INTs A-D are routed to
- * OpenPIC inputs 8-11 and the PMC INTs A-D are routed to OpenPIC
- * input 3.  On a hot swap MCP750, the companion card PCI INTs A-D
- * are routed to OpenPIC inputs 12-15. These values are offset by
- * 16 in the table to reflect the Linux kernel interrupt value.
- */
-struct powerplus_irq_list Mesquite_pci_IRQ_list =
-{
-	{24, 25, 26, 27},
-	{28, 29, 30, 31}
-};
-
-/*
- * This table represents the standard PCI swizzle defined in the
- * PCI bus specification.
- */
-static unsigned char prep_pci_intpins[4][4] =
-{
-	{ 1, 2, 3, 4},  /* Buses 0, 4, 8, ... */
-	{ 2, 3, 4, 1},  /* Buses 1, 5, 9, ... */
-	{ 3, 4, 1, 2},  /* Buses 2, 6, 10 ... */
-	{ 4, 1, 2, 3},  /* Buses 3, 7, 11 ... */
-};
-
-/* We have to turn on LEVEL mode for changed IRQs */
-/* All PCI IRQs need to be level mode, so this should be something
- * other than hard-coded as well... IRQs are individually mappable
- * to either edge or level.
- */
-
-/*
- * 8259 edge/level control definitions
- */
-#define ISA8259_M_ELCR 0x4d0
-#define ISA8259_S_ELCR 0x4d1
-
-#define ELCRS_INT15_LVL         0x80
-#define ELCRS_INT14_LVL         0x40
-#define ELCRS_INT12_LVL         0x10
-#define ELCRS_INT11_LVL         0x08
-#define ELCRS_INT10_LVL         0x04
-#define ELCRS_INT9_LVL          0x02
-#define ELCRS_INT8_LVL          0x01
-#define ELCRM_INT7_LVL          0x80
-#define ELCRM_INT5_LVL          0x20
-
-#if 0
-/*
- * PCI config space access.
- */
-#define CFGADDR(dev)	((1<<(dev>>3)) | ((dev&7)<<8))
-#define DEVNO(dev)	(dev>>3)
-
-#define MIN_DEVNR	11
-#define MAX_DEVNR	22
-
-static int
-prep_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		 int len, u32 *val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	volatile void __iomem *cfg_data;
-
-	if (bus->number != 0 || DEVNO(devfn) < MIN_DEVNR
-	    || DEVNO(devfn) > MAX_DEVNR)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + CFGADDR(devfn) + offset;
-	switch (len) {
-	case 1:
-		*val = in_8(cfg_data);
-		break;
-	case 2:
-		*val = in_le16(cfg_data);
-		break;
-	default:
-		*val = in_le32(cfg_data);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-prep_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		  int len, u32 val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	volatile void __iomem *cfg_data;
-
-	if (bus->number != 0 || DEVNO(devfn) < MIN_DEVNR
-	    || DEVNO(devfn) > MAX_DEVNR)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + CFGADDR(devfn) + offset;
-	switch (len) {
-	case 1:
-		out_8(cfg_data, val);
-		break;
-	case 2:
-		out_le16(cfg_data, val);
-		break;
-	default:
-		out_le32(cfg_data, val);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops prep_pci_ops =
-{
-	prep_read_config,
-	prep_write_config
-};
-#endif
-
-#define MOTOROLA_CPUTYPE_REG	0x800
-#define MOTOROLA_BASETYPE_REG	0x803
-#define MPIC_RAVEN_ID		0x48010000
-#define	MPIC_HAWK_ID		0x48030000
-#define	MOT_PROC2_BIT		0x800
-
-static u_char prep_openpic_initsenses[] __initdata = {
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* MVME2600_INT_SIO */
-    (IRQ_SENSE_EDGE  | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_FALCN_ECC_ERR */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_ETHERNET */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_SCSI */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_GRAPHICS */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME0 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME1 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME2 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME3 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTA */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTB */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTC */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTD */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG0 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG1 */
-};
-
-#define MOT_RAVEN_PRESENT	0x1
-#define MOT_HAWK_PRESENT	0x2
-
-int mot_entry = -1;
-int prep_keybd_present = 1;
-int MotMPIC;
-int mot_multi;
-
-int __init
-raven_init(void)
-{
-	unsigned int	devid;
-	unsigned int	pci_membase;
-	unsigned char	base_mod;
-
-	/* Check to see if the Raven chip exists. */
-	if ( _prep_type != _PREP_Motorola) {
-		OpenPIC_Addr = NULL;
-		return 0;
-	}
-
-	/* Check to see if this board is a type that might have a Raven. */
-	if ((inb(MOTOROLA_CPUTYPE_REG) & 0xF0) != 0xE0) {
-		OpenPIC_Addr = NULL;
-		return 0;
-	}
-
-	/* Check the first PCI device to see if it is a Raven. */
-	early_read_config_dword(NULL, 0, 0, PCI_VENDOR_ID, &devid);
-
-	switch (devid & 0xffff0000) {
-	case MPIC_RAVEN_ID:
-		MotMPIC = MOT_RAVEN_PRESENT;
-		break;
-	case MPIC_HAWK_ID:
-		MotMPIC = MOT_HAWK_PRESENT;
-		break;
-	default:
-		OpenPIC_Addr = NULL;
-		return 0;
-	}
-
-
-	/* Read the memory base register. */
-	early_read_config_dword(NULL, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
-
-	if (pci_membase == 0) {
-		OpenPIC_Addr = NULL;
-		return 0;
-	}
-
-	/* Map the Raven MPIC registers to virtual memory. */
-	OpenPIC_Addr = ioremap(pci_membase+0xC0000000, 0x22000);
-
-	OpenPIC_InitSenses = prep_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(prep_openpic_initsenses);
-
-	ppc_md.get_irq = openpic_get_irq;
-
-	/* If raven is present on Motorola store the system config register
-	 * for later use.
-	 */
-	ProcInfo = (unsigned long *)ioremap(0xfef80400, 4);
-
-	/* Indicate to system if this is a multiprocessor board */
-	if (!(*ProcInfo & MOT_PROC2_BIT)) {
-		mot_multi = 1;
-	}
-
-	/* This is a hack.  If this is a 2300 or 2400 mot board then there is
-	 * no keyboard controller and we have to indicate that.
-	 */
-	base_mod = inb(MOTOROLA_BASETYPE_REG);
-	if ((MotMPIC == MOT_HAWK_PRESENT) || (base_mod == 0xF9) ||
-	    (base_mod == 0xFA) || (base_mod == 0xE1))
-		prep_keybd_present = 0;
-
-	return 1;
-}
-
-struct mot_info {
-	int		cpu_type;	/* 0x100 mask assumes for Raven and Hawk boards that the level/edge are set */
-					/* 0x200 if this board has a Hawk chip. */
-	int		base_type;
-	int		max_cpu;	/* ored with 0x80 if this board should be checked for multi CPU */
-	const char	*name;
-	unsigned char	*map;
-	unsigned char	*routes;
-	void            (*map_non0_bus)(struct pci_dev *);      /* For boards with more than bus 0 devices. */
-	struct powerplus_irq_list *pci_irq_list; /* List of PCI MPIC inputs */
-	unsigned char   secondary_bridge_devfn; /* devfn of secondary bus transparent bridge */
-} mot_info[] = {
-	{0x300, 0x00, 0x00, "MVME 2400",			Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x010, 0x00, 0x00, "Genesis",				Genesis_pci_IRQ_map,	Genesis_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x020, 0x00, 0x00, "Powerstack (Series E)",		Comet_pci_IRQ_map,	Comet_pci_IRQ_routes, NULL, NULL, 0x00},
-	{0x040, 0x00, 0x00, "Blackhawk (Powerstack)",		Blackhawk_pci_IRQ_map,	Blackhawk_pci_IRQ_routes, NULL, NULL, 0x00},
-	{0x050, 0x00, 0x00, "Omaha (PowerStack II Pro3000)",	Omaha_pci_IRQ_map,	Omaha_pci_IRQ_routes, NULL, NULL, 0x00},
-	{0x060, 0x00, 0x00, "Utah (Powerstack II Pro4000)",	Utah_pci_IRQ_map,	Utah_pci_IRQ_routes, NULL, NULL, 0x00},
-	{0x0A0, 0x00, 0x00, "Powerstack (Series EX)",		Comet2_pci_IRQ_map,	Comet2_pci_IRQ_routes, NULL, NULL, 0x00},
-	{0x1E0, 0xE0, 0x00, "Mesquite cPCI (MCP750)",		Mesquite_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Mesquite_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xE1, 0x00, "Sitka cPCI (MCPN750)",		Sitka_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xE2, 0x00, "Mesquite cPCI (MCP750) w/ HAC",	Mesquite_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Mesquite_pci_IRQ_list, 0xC0},
-	{0x1E0, 0xF6, 0x80, "MTX Plus",				MTXplus_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xA0},
-	{0x1E0, 0xF6, 0x81, "Dual MTX Plus",			MTXplus_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xA0},
-	{0x1E0, 0xF7, 0x80, "MTX wo/ Parallel Port",		MTX_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x1E0, 0xF7, 0x81, "Dual MTX wo/ Parallel Port",	MTX_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x1E0, 0xF8, 0x80, "MTX w/ Parallel Port",		MTX_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x1E0, 0xF8, 0x81, "Dual MTX w/ Parallel Port",	MTX_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x1E0, 0xF9, 0x00, "MVME 2300",			Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFA, 0x00, "MVME 2300SC/2600",			Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFB, 0x00, "MVME 2600 with MVME712M",		Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFC, 0x00, "MVME 2600/2700 with MVME761",	Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFD, 0x80, "MVME 3600 with MVME712M",		Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0x00},
-	{0x1E0, 0xFD, 0x81, "MVME 4600 with MVME712M",		Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFE, 0x80, "MVME 3600 with MVME761",		Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFE, 0x81, "MVME 4600 with MVME761",		Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x1E0, 0xFF, 0x00, "MVME 1600-001 or 1600-011",	Genesis2_pci_IRQ_map,	Raven_pci_IRQ_routes, Powerplus_Map_Non0, &Powerplus_pci_IRQ_list, 0xFF},
-	{0x000, 0x00, 0x00, "",					NULL,			NULL, NULL, NULL, 0x00}
-};
-
-void __init
-ibm_prep_init(void)
-{
-	if (have_residual_data) {
-		u32 addr, real_addr, len, offset;
-		PPC_DEVICE *mpic;
-		PnP_TAG_PACKET *pkt;
-
-		/* Use the PReP residual data to determine if an OpenPIC is
-		 * present.  If so, get the large vendor packet which will
-		 * tell us the base address and length in memory.
-		 * If we are successful, ioremap the memory area and set
-		 * OpenPIC_Addr (this indicates that the OpenPIC was found).
-		 */
-		mpic = residual_find_device(-1, NULL, SystemPeripheral,
-				    ProgrammableInterruptController, MPIC, 0);
-		if (!mpic)
-			return;
-
-		pkt = PnP_find_large_vendor_packet(res->DevicePnPHeap +
-				mpic->AllocatedOffset, 9, 0);
-
-		if (!pkt)
-			return;
-
-#define p pkt->L4_Pack.L4_Data.L4_PPCPack
-	 	if (p.PPCData[1] == 32) {
-			switch (p.PPCData[0]) {
-				case 1:  offset = PREP_ISA_IO_BASE;  break;
-				case 2:  offset = PREP_ISA_MEM_BASE; break;
-				default: return; /* Not I/O or memory?? */
-			}
-		}
-		else
-			return; /* Not a 32-bit address */
-
-		real_addr = ld_le32((unsigned int *) (p.PPCData + 4));
-		if (real_addr == 0xffffffff)
-			return;
-
-		/* Adjust address to be as seen by CPU */
-		addr = real_addr + offset;
-
-		len = ld_le32((unsigned int *) (p.PPCData + 12));
-		if (!len)
-			return;
-#undef p
-		OpenPIC_Addr = ioremap(addr, len);
-		ppc_md.get_irq = openpic_get_irq;
-
-		OpenPIC_InitSenses = prep_openpic_initsenses;
-		OpenPIC_NumInitSenses = sizeof(prep_openpic_initsenses);
-
-		printk(KERN_INFO "MPIC at 0x%08x (0x%08x), length 0x%08x "
-		       "mapped to 0x%p\n", addr, real_addr, len, OpenPIC_Addr);
-	}
-}
-
-static void __init
-ibm43p_pci_map_non0(struct pci_dev *dev)
-{
-	unsigned char intpin;
-	static unsigned char bridge_intrs[4] = { 3, 4, 5, 8 };
-
-	if (dev == NULL)
-		return;
-	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &intpin);
-	if (intpin < 1 || intpin > 4)
-		return;
-	intpin = (PCI_SLOT(dev->devfn) + intpin - 1) & 3;
-	dev->irq = openpic_to_irq(bridge_intrs[intpin]);
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-}
-
-void __init
-prep_residual_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	if (have_residual_data) {
-		Motherboard_map_name = res->VitalProductData.PrintableModel;
-		Motherboard_map = NULL;
-		Motherboard_routes = NULL;
-		residual_irq_mask(irq_edge_mask_lo, irq_edge_mask_hi);
-	}
-}
-
-void __init
-prep_sandalfoot_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	Motherboard_map_name = "IBM 6015/7020 (Sandalfoot/Sandalbow)";
-	Motherboard_map = ibm6015_pci_IRQ_map;
-	Motherboard_routes = ibm6015_pci_IRQ_routes;
-	*irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */
-	*irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */
-}
-
-void __init
-prep_thinkpad_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	Motherboard_map_name = "IBM Thinkpad 850/860";
-	Motherboard_map = Nobis_pci_IRQ_map;
-	Motherboard_routes = Nobis_pci_IRQ_routes;
-	*irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */
-	*irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */
-}
-
-void __init
-prep_carolina_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	Motherboard_map_name = "IBM 7248, PowerSeries 830/850 (Carolina)";
-	Motherboard_map = ibm8xx_pci_IRQ_map;
-	Motherboard_routes = ibm8xx_pci_IRQ_routes;
-	*irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */
-	*irq_edge_mask_hi = 0xA4; /* IRQs 10, 13, 15 level-triggered */
-}
-
-void __init
-prep_tiger1_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	Motherboard_map_name = "IBM 43P-140 (Tiger1)";
-	Motherboard_map = ibm43p_pci_IRQ_map;
-	Motherboard_routes = ibm43p_pci_IRQ_routes;
-	Motherboard_non0 = ibm43p_pci_map_non0;
-	*irq_edge_mask_lo = 0x00; /* IRQs 0-7 all edge-triggered */
-	*irq_edge_mask_hi = 0xA0; /* IRQs 13, 15 level-triggered */
-}
-
-void __init
-prep_route_pci_interrupts(void)
-{
-	unsigned char *ibc_pirq = (unsigned char *)0x80800860;
-	unsigned char *ibc_pcicon = (unsigned char *)0x80800840;
-	int i;
-
-	if ( _prep_type == _PREP_Motorola)
-	{
-		unsigned short irq_mode;
-		unsigned char  cpu_type;
-		unsigned char  base_mod;
-		int	       entry;
-
-		cpu_type = inb(MOTOROLA_CPUTYPE_REG) & 0xF0;
-		base_mod = inb(MOTOROLA_BASETYPE_REG);
-
-		for (entry = 0; mot_info[entry].cpu_type != 0; entry++) {
-			if (mot_info[entry].cpu_type & 0x200) {		 	/* Check for Hawk chip */
-				if (!(MotMPIC & MOT_HAWK_PRESENT))
-					continue;
-			} else {						/* Check non hawk boards */
-				if ((mot_info[entry].cpu_type & 0xff) != cpu_type)
-					continue;
-
-				if (mot_info[entry].base_type == 0) {
-					mot_entry = entry;
-					break;
-				}
-
-				if (mot_info[entry].base_type != base_mod)
-					continue;
-			}
-
-			if (!(mot_info[entry].max_cpu & 0x80)) {
-				mot_entry = entry;
-				break;
-			}
-
-			/* processor 1 not present and max processor zero indicated */
-			if ((*ProcInfo & MOT_PROC2_BIT) && !(mot_info[entry].max_cpu & 0x7f)) {
-				mot_entry = entry;
-				break;
-			}
-
-			/* processor 1 present and max processor zero indicated */
-			if (!(*ProcInfo & MOT_PROC2_BIT) && (mot_info[entry].max_cpu & 0x7f)) {
-				mot_entry = entry;
-				break;
-			}
-		}
-
-		if (mot_entry == -1) 	/* No particular cpu type found - assume Blackhawk */
-			mot_entry = 3;
-
-		Motherboard_map_name = (unsigned char *)mot_info[mot_entry].name;
-		Motherboard_map = mot_info[mot_entry].map;
-		Motherboard_routes = mot_info[mot_entry].routes;
-		Motherboard_non0 = mot_info[mot_entry].map_non0_bus;
-
-		if (!(mot_info[entry].cpu_type & 0x100)) {
-			/* AJF adjust level/edge control according to routes */
-			irq_mode = 0;
-			for (i = 1;  i <= 4;  i++)
-				irq_mode |= ( 1 << Motherboard_routes[i] );
-			outb( irq_mode & 0xff, 0x4d0 );
-			outb( (irq_mode >> 8) & 0xff, 0x4d1 );
-		}
-	} else if ( _prep_type == _PREP_IBM ) {
-		unsigned char irq_edge_mask_lo, irq_edge_mask_hi;
-		unsigned short irq_edge_mask;
-		int i;
-
-		setup_ibm_pci(&irq_edge_mask_lo, &irq_edge_mask_hi);
-
-		outb(inb(0x04d0)|irq_edge_mask_lo, 0x4d0); /* primary 8259 */
-		outb(inb(0x04d1)|irq_edge_mask_hi, 0x4d1); /* cascaded 8259 */
-
-		irq_edge_mask = (irq_edge_mask_hi << 8) | irq_edge_mask_lo;
-		for (i = 0; i < 16; ++i, irq_edge_mask >>= 1)
-			if (irq_edge_mask & 1)
-				irq_desc[i].status |= IRQ_LEVEL;
-	} else {
-		printk("No known machine pci routing!\n");
-		return;
-	}
-
-	/* Set up mapping from slots */
-	if (Motherboard_routes) {
-		for (i = 1;  i <= 4;  i++)
-			ibc_pirq[i-1] = Motherboard_routes[i];
-
-		/* Enable PCI interrupts */
-		*ibc_pcicon |= 0x20;
-	}
-}
-
-void __init
-prep_pib_init(void)
-{
-	unsigned char   reg;
-	unsigned short  short_reg;
-
-	struct pci_dev *dev = NULL;
-
-	if (( _prep_type == _PREP_Motorola) && (OpenPIC_Addr)) {
-		/*
-		 * Perform specific configuration for the Via Tech or
-		 * or Winbond PCI-ISA-Bridge part.
-		 */
-		if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-					PCI_DEVICE_ID_VIA_82C586_1, dev))) {
-			/*
-			 * PPCBUG does not set the enable bits
-			 * for the IDE device. Force them on here.
-			 */
-			pci_read_config_byte(dev, 0x40, &reg);
-
-			reg |= 0x03; /* IDE: Chip Enable Bits */
-			pci_write_config_byte(dev, 0x40, reg);
-		}
-		if ((dev = pci_get_device(PCI_VENDOR_ID_VIA,
-						PCI_DEVICE_ID_VIA_82C586_2,
-						dev)) && (dev->devfn = 0x5a)) {
-			/* Force correct USB interrupt */
-			dev->irq = 11;
-			pci_write_config_byte(dev,
-					PCI_INTERRUPT_LINE,
-					dev->irq);
-		}
-		if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
-					PCI_DEVICE_ID_WINBOND_83C553, dev))) {
-			 /* Clear PCI Interrupt Routing Control Register. */
-			short_reg = 0x0000;
-			pci_write_config_word(dev, 0x44, short_reg);
-			if (OpenPIC_Addr){
-				/* Route IDE interrupts to IRQ 14 */
-				reg = 0xEE;
-				pci_write_config_byte(dev, 0x43, reg);
-			}
-		}
-	}
-
-	if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
-				   PCI_DEVICE_ID_WINBOND_82C105, dev))){
-		if (OpenPIC_Addr){
-			/*
-			 * Disable LEGIRQ mode so PCI INTS are routed
-			 * directly to the 8259 and enable both channels
-			 */
-			pci_write_config_dword(dev, 0x40, 0x10ff0033);
-
-			/* Force correct IDE interrupt */
-			dev->irq = 14;
-			pci_write_config_byte(dev,
-					PCI_INTERRUPT_LINE,
-					dev->irq);
-		} else {
-			/* Enable LEGIRQ for PCI INT -> 8259 IRQ routing */
-			pci_write_config_dword(dev, 0x40, 0x10ff08a1);
-		}
-	}
-	pci_dev_put(dev);
-}
-
-static void __init
-Powerplus_Map_Non0(struct pci_dev *dev)
-{
-	struct pci_bus  *pbus;          /* Parent bus structure pointer */
-	struct pci_dev  *tdev = dev;    /* Temporary device structure */
-	unsigned int    devnum;         /* Accumulated device number */
-	unsigned char   intline;        /* Linux interrupt value */
-	unsigned char   intpin;         /* PCI interrupt pin */
-
-	/* Check for valid PCI dev pointer */
-	if (dev == NULL) return;
-
-	/* Initialize bridge IDSEL variable */
-	devnum = PCI_SLOT(tdev->devfn);
-
-	/* Read the interrupt pin of the device and adjust for indexing */
-	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &intpin);
-
-	/* If device doesn't request an interrupt, return */
-	if ( (intpin < 1) || (intpin > 4) )
-		return;
-
-	intpin--;
-
-	/*
-	 * Walk up to bus 0, adjusting the interrupt pin for the standard
-	 * PCI bus swizzle.
-	 */
-	do {
-		intpin = (prep_pci_intpins[devnum % 4][intpin]) - 1;
-		pbus = tdev->bus;        /* up one level */
-		tdev = pbus->self;
-		devnum = PCI_SLOT(tdev->devfn);
-	} while(tdev->bus->number);
-
-	/* Use the primary interrupt inputs by default */
-	intline = mot_info[mot_entry].pci_irq_list->primary[intpin];
-
-	/*
-	 * If the board has secondary interrupt inputs, walk the bus and
-	 * note the devfn of the bridge from bus 0.  If it is the same as
-	 * the devfn of the bus bridge with secondary inputs, use those.
-	 * Otherwise, assume it's a PMC site and get the interrupt line
-	 * value from the interrupt routing table.
-	 */
-	if (mot_info[mot_entry].secondary_bridge_devfn) {
-		pbus = dev->bus;
-
-		while (pbus->primary != 0)
-			pbus = pbus->parent;
-
-		if ((pbus->self)->devfn != 0xA0) {
-			if ((pbus->self)->devfn == mot_info[mot_entry].secondary_bridge_devfn)
-				intline = mot_info[mot_entry].pci_irq_list->secondary[intpin];
-			else {
-				if ((char *)(mot_info[mot_entry].map) == (char *)Mesquite_pci_IRQ_map)
-					intline = mot_info[mot_entry].map[((pbus->self)->devfn)/8] + 16;
-				else {
-					int i;
-					for (i=0;i<3;i++)
-						intpin = (prep_pci_intpins[devnum % 4][intpin]) - 1;
-					intline = mot_info[mot_entry].pci_irq_list->primary[intpin];
-				}
-			}
-		}
-	}
-
-	/* Write calculated interrupt value to header and device list */
-	dev->irq = intline;
-	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, (u8)dev->irq);
-}
-
-void __init
-prep_pcibios_fixup(void)
-{
-        struct pci_dev *dev = NULL;
-	int irq;
-	int have_openpic = (OpenPIC_Addr != NULL);
-
-	prep_route_pci_interrupts();
-
-	printk("Setting PCI interrupts for a \"%s\"\n", Motherboard_map_name);
-
-	/* Iterate through all the PCI devices, setting the IRQ */
-	for_each_pci_dev(dev) {
-		/*
-		 * If we have residual data, then this is easy: query the
-		 * residual data for the IRQ line allocated to the device.
-		 * This works the same whether we have an OpenPic or not.
-		 */
-		if (have_residual_data) {
-			irq = residual_pcidev_irq(dev);
-			dev->irq = have_openpic ? openpic_to_irq(irq) : irq;
-		}
-		/*
-		 * If we don't have residual data, then we need to use
-		 * tables to determine the IRQ.  The table organisation
-		 * is different depending on whether there is an OpenPIC
-		 * or not.  The tables are only used for bus 0, so check
-		 * this first.
-		 */
-		else if (dev->bus->number == 0) {
-			irq = Motherboard_map[PCI_SLOT(dev->devfn)];
-			dev->irq = have_openpic ? openpic_to_irq(irq)
-						: Motherboard_routes[irq];
-		}
-		/*
-		 * Finally, if we don't have residual data and the bus is
-		 * non-zero, use the callback (if provided)
-		 */
-		else {
-			if (Motherboard_non0 != NULL)
-				Motherboard_non0(dev);
-
-			continue;
-		}
-
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-	}
-
-	/* Setup the Winbond or Via PIB - prep_pib_init() is coded for
-	 * the non-openpic case, but it breaks (at least) the Utah
-	 * (Powerstack II Pro4000), so only call it if we have an
-	 * openpic.
-	 */
-	if (have_openpic)
-		prep_pib_init();
-}
-
-static void __init
-prep_pcibios_after_init(void)
-{
-#if 0
-	struct pci_dev *dev;
-
-	/* If there is a WD 90C, reset the IO BAR to 0x0 (it started that
-	 * way, but the PCI layer relocated it because it thought 0x0 was
-	 * invalid for a BAR).
-	 * If you don't do this, the card's VGA base will be <IO BAR>+0xc0000
-	 * instead of 0xc0000. vgacon.c (for example) is completely unaware of
-	 * this little quirk.
-	 */
-	dev = pci_get_device(PCI_VENDOR_ID_WD, PCI_DEVICE_ID_WD_90C, NULL);
-	if (dev) {
-		dev->resource[1].end -= dev->resource[1].start;
-		dev->resource[1].start = 0;
-		/* tell the hardware */
-		pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0x0);
-		pci_dev_put(dev);
-	}
-#endif
-}
-
-static void __init
-prep_init_resource(struct resource *res, unsigned long start,
-		   unsigned long end, int flags)
-{
-	res->flags = flags;
-	res->start = start;
-	res->end = end;
-	res->name = "PCI host bridge";
-	res->parent = NULL;
-	res->sibling = NULL;
-	res->child = NULL;
-}
-
-void __init
-prep_find_bridges(void)
-{
-	struct pci_controller* hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->pci_mem_offset = PREP_ISA_MEM_BASE;
-	hose->io_base_phys = PREP_ISA_IO_BASE;
-	hose->io_base_virt = ioremap(PREP_ISA_IO_BASE, 0x800000);
-	prep_init_resource(&hose->io_resource, 0, 0x007fffff, IORESOURCE_IO);
-	prep_init_resource(&hose->mem_resources[0], 0xc0000000, 0xfeffffff,
-			   IORESOURCE_MEM);
-	setup_indirect_pci(hose, PREP_ISA_IO_BASE + 0xcf8,
-			   PREP_ISA_IO_BASE + 0xcfc);
-
-	printk("PReP architecture\n");
-
-	if (have_residual_data) {
-		PPC_DEVICE *hostbridge;
-
-		hostbridge = residual_find_device(PROCESSORDEVICE, NULL,
-			BridgeController, PCIBridge, -1, 0);
-		if (hostbridge &&
-			((hostbridge->DeviceId.Interface == PCIBridgeIndirect) ||
-			 (hostbridge->DeviceId.Interface == PCIBridgeRS6K))) {
-			PnP_TAG_PACKET * pkt;
-			pkt = PnP_find_large_vendor_packet(
-				res->DevicePnPHeap+hostbridge->AllocatedOffset,
-				3, 0);
-			if(pkt) {
-#define p pkt->L4_Pack.L4_Data.L4_PPCPack
-				setup_indirect_pci(hose,
-					ld_le32((unsigned *) (p.PPCData)),
-					ld_le32((unsigned *) (p.PPCData+8)));
-#undef p
-			} else
-				setup_indirect_pci(hose, 0x80000cf8, 0x80000cfc);
-		}
-	}
-
-	ppc_md.pcibios_fixup = prep_pcibios_fixup;
-	ppc_md.pcibios_after_init = prep_pcibios_after_init;
-}
diff --git a/arch/ppc/platforms/prep_setup.c b/arch/ppc/platforms/prep_setup.c
deleted file mode 100644
index 465b658c927d..000000000000
--- a/arch/ppc/platforms/prep_setup.c
+++ /dev/null
@@ -1,1043 +0,0 @@
-/*
- *  Copyright (C) 1995  Linus Torvalds
- *  Adapted from 'alpha' version by Gary Thomas
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *
- * Support for PReP (Motorola MTX/MVME)
- * by Troy Benjegerdes (hozer@drgw.net)
- */
-
-/*
- * bootup setup stuff..
- */
-
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/screen_info.h>
-#include <linux/major.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/ioport.h>
-#include <linux/console.h>
-#include <linux/timex.h>
-#include <linux/pci.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#include <asm/sections.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <asm/residual.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/cache.h>
-#include <asm/dma.h>
-#include <asm/machdep.h>
-#include <asm/mc146818rtc.h>
-#include <asm/mk48t59.h>
-#include <asm/prep_nvram.h>
-#include <asm/raven.h>
-#include <asm/vga.h>
-#include <asm/time.h>
-#include <asm/mpc10x.h>
-#include <asm/i8259.h>
-#include <asm/open_pic.h>
-#include <asm/pci-bridge.h>
-#include <asm/todc.h>
-
-/* prep registers for L2 */
-#define CACHECRBA       0x80000823      /* Cache configuration register address */
-#define L2CACHE_MASK	0x03	/* Mask for 2 L2 Cache bits */
-#define L2CACHE_512KB	0x00	/* 512KB */
-#define L2CACHE_256KB	0x01	/* 256KB */
-#define L2CACHE_1MB	0x02	/* 1MB */
-#define L2CACHE_NONE	0x03	/* NONE */
-#define L2CACHE_PARITY  0x08    /* Mask for L2 Cache Parity Protected bit */
-
-TODC_ALLOC();
-
-extern unsigned char prep_nvram_read_val(int addr);
-extern void prep_nvram_write_val(int addr,
-				 unsigned char val);
-extern unsigned char rs_nvram_read_val(int addr);
-extern void rs_nvram_write_val(int addr,
-				 unsigned char val);
-extern void ibm_prep_init(void);
-
-extern void prep_find_bridges(void);
-
-int _prep_type;
-
-extern void prep_residual_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
-extern void prep_sandalfoot_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
-extern void prep_thinkpad_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
-extern void prep_carolina_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
-extern void prep_tiger1_setup_pci(char *irq_edge_mask_lo, char *irq_edge_mask_hi);
-
-
-#define cached_21	(((char *)(ppc_cached_irq_mask))[3])
-#define cached_A1	(((char *)(ppc_cached_irq_mask))[2])
-
-extern PTE *Hash, *Hash_end;
-extern unsigned long Hash_size, Hash_mask;
-extern int probingmem;
-extern unsigned long loops_per_jiffy;
-
-/* useful ISA ports */
-#define PREP_SYSCTL	0x81c
-/* present in the IBM reference design; possibly identical in Mot boxes: */
-#define PREP_IBM_SIMM_ID	0x803	/* SIMM size: 32 or 8 MiB */
-#define PREP_IBM_SIMM_PRESENCE	0x804
-#define PREP_IBM_EQUIPMENT	0x80c
-#define PREP_IBM_L2INFO	0x80d
-#define PREP_IBM_PM1	0x82a	/* power management register 1 */
-#define PREP_IBM_PLANAR	0x852	/* planar ID - identifies the motherboard */
-#define PREP_IBM_DISP	0x8c0	/* 4-digit LED display */
-
-/* Equipment Present Register masks: */
-#define PREP_IBM_EQUIPMENT_RESERVED	0x80
-#define PREP_IBM_EQUIPMENT_SCSIFUSE	0x40
-#define PREP_IBM_EQUIPMENT_L2_COPYBACK	0x08
-#define PREP_IBM_EQUIPMENT_L2_256	0x04
-#define PREP_IBM_EQUIPMENT_CPU	0x02
-#define PREP_IBM_EQUIPMENT_L2	0x01
-
-/* planar ID values: */
-/* Sandalfoot/Sandalbow (6015/7020) */
-#define PREP_IBM_SANDALFOOT	0xfc
-/* Woodfield, Thinkpad 850/860 (6042/7249) */
-#define PREP_IBM_THINKPAD	0xff /* planar ID unimplemented */
-/* PowerSeries 830/850 (6050/6070) */
-#define PREP_IBM_CAROLINA_IDE_0	0xf0
-#define PREP_IBM_CAROLINA_IDE_1	0xf1
-#define PREP_IBM_CAROLINA_IDE_2	0xf2
-#define PREP_IBM_CAROLINA_IDE_3	0xf3
-/* 7248-43P */
-#define PREP_IBM_CAROLINA_SCSI_0	0xf4
-#define PREP_IBM_CAROLINA_SCSI_1	0xf5
-#define PREP_IBM_CAROLINA_SCSI_2	0xf6
-#define PREP_IBM_CAROLINA_SCSI_3	0xf7 /* missing from Carolina Tech Spec */
-/* Tiger1 (7043-140) */
-#define PREP_IBM_TIGER1_133		0xd1
-#define PREP_IBM_TIGER1_166		0xd2
-#define PREP_IBM_TIGER1_180		0xd3
-#define PREP_IBM_TIGER1_xxx		0xd4 /* unknown, but probably exists */
-#define PREP_IBM_TIGER1_333		0xd5 /* missing from Tiger Tech Spec */
-
-/* setup_ibm_pci:
- * 	set Motherboard_map_name, Motherboard_map, Motherboard_routes.
- * 	return 8259 edge/level masks.
- */
-void (*setup_ibm_pci)(char *irq_lo, char *irq_hi);
-
-extern char *Motherboard_map_name; /* for use in *_cpuinfo */
-
-/*
- * As found in the PReP reference implementation.
- * Used by Thinkpad, Sandalfoot (6015/7020), and all Motorola PReP.
- */
-static void __init
-prep_gen_enable_l2(void)
-{
-	outb(inb(PREP_SYSCTL) | 0x3, PREP_SYSCTL);
-}
-
-/* Used by Carolina and Tiger1 */
-static void __init
-prep_carolina_enable_l2(void)
-{
-	outb(inb(PREP_SYSCTL) | 0xc0, PREP_SYSCTL);
-}
-
-/* cpuinfo code common to all IBM PReP */
-static void
-prep_ibm_cpuinfo(struct seq_file *m)
-{
-	unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT);
-
-	seq_printf(m, "machine\t\t: PReP %s\n", Motherboard_map_name);
-
-	seq_printf(m, "upgrade cpu\t: ");
-	if (equip_reg & PREP_IBM_EQUIPMENT_CPU) {
-		seq_printf(m, "not ");
-	}
-	seq_printf(m, "present\n");
-
-	/* print info about the SCSI fuse */
-	seq_printf(m, "scsi fuse\t: ");
-	if (equip_reg & PREP_IBM_EQUIPMENT_SCSIFUSE)
-		seq_printf(m, "ok");
-	else
-		seq_printf(m, "bad");
-	seq_printf(m, "\n");
-
-	/* print info about SIMMs */
-	if (have_residual_data) {
-		int i;
-		seq_printf(m, "simms\t\t: ");
-		for (i = 0; (res->ActualNumMemories) && (i < MAX_MEMS); i++) {
-			if (res->Memories[i].SIMMSize != 0)
-				seq_printf(m, "%d:%ldMiB ", i,
-					(res->Memories[i].SIMMSize > 1024) ?
-					res->Memories[i].SIMMSize>>20 :
-					res->Memories[i].SIMMSize);
-		}
-		seq_printf(m, "\n");
-	}
-}
-
-static int
-prep_gen_cpuinfo(struct seq_file *m)
-{
-	prep_ibm_cpuinfo(m);
-	return 0;
-}
-
-static int
-prep_sandalfoot_cpuinfo(struct seq_file *m)
-{
-	unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT);
-
-	prep_ibm_cpuinfo(m);
-
-	/* report amount and type of L2 cache present */
-	seq_printf(m, "L2 cache\t: ");
-	if (equip_reg & PREP_IBM_EQUIPMENT_L2) {
-		seq_printf(m, "not present");
-	} else {
-		if (equip_reg & PREP_IBM_EQUIPMENT_L2_256)
-			seq_printf(m, "256KiB");
-		else
-			seq_printf(m, "unknown size");
-
-		if (equip_reg & PREP_IBM_EQUIPMENT_L2_COPYBACK)
-			seq_printf(m, ", copy-back");
-		else
-			seq_printf(m, ", write-through");
-	}
-	seq_printf(m, "\n");
-
-	return 0;
-}
-
-static int
-prep_thinkpad_cpuinfo(struct seq_file *m)
-{
-	unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT);
-	char *cpubus_speed, *pci_speed;
-
-	prep_ibm_cpuinfo(m);
-
-	/* report amount and type of L2 cache present */
-	seq_printf(m, "l2 cache\t: ");
-	if ((equip_reg & 0x1) == 0) {
-		switch ((equip_reg & 0xc) >> 2) {
-			case 0x0:
-				seq_printf(m, "128KiB look-aside 2-way write-through\n");
-				break;
-			case 0x1:
-				seq_printf(m, "512KiB look-aside direct-mapped write-back\n");
-				break;
-			case 0x2:
-				seq_printf(m, "256KiB look-aside 2-way write-through\n");
-				break;
-			case 0x3:
-				seq_printf(m, "256KiB look-aside direct-mapped write-back\n");
-				break;
-		}
-	} else {
-		seq_printf(m, "not present\n");
-	}
-
-	/* report bus speeds because we can */
-	if ((equip_reg & 0x80) == 0) {
-		switch ((equip_reg & 0x30) >> 4) {
-			case 0x1:
-				cpubus_speed = "50";
-				pci_speed = "25";
-				break;
-			case 0x3:
-				cpubus_speed = "66";
-				pci_speed = "33";
-				break;
-			default:
-				cpubus_speed = "unknown";
-				pci_speed = "unknown";
-				break;
-		}
-	} else {
-		switch ((equip_reg & 0x30) >> 4) {
-			case 0x1:
-				cpubus_speed = "25";
-				pci_speed = "25";
-				break;
-			case 0x2:
-				cpubus_speed = "60";
-				pci_speed = "30";
-				break;
-			case 0x3:
-				cpubus_speed = "33";
-				pci_speed = "33";
-				break;
-			default:
-				cpubus_speed = "unknown";
-				pci_speed = "unknown";
-				break;
-		}
-	}
-	seq_printf(m, "60x bus\t\t: %sMHz\n", cpubus_speed);
-	seq_printf(m, "pci bus\t\t: %sMHz\n", pci_speed);
-
-	return 0;
-}
-
-static int
-prep_carolina_cpuinfo(struct seq_file *m)
-{
-	unsigned int equip_reg = inb(PREP_IBM_EQUIPMENT);
-
-	prep_ibm_cpuinfo(m);
-
-	/* report amount and type of L2 cache present */
-	seq_printf(m, "l2 cache\t: ");
-	if ((equip_reg & 0x1) == 0) {
-		unsigned int l2_reg = inb(PREP_IBM_L2INFO);
-
-		/* L2 size */
-		if ((l2_reg & 0x60) == 0)
-			seq_printf(m, "256KiB");
-		else if ((l2_reg & 0x60) == 0x20)
-			seq_printf(m, "512KiB");
-		else
-			seq_printf(m, "unknown size");
-
-		/* L2 type */
-		if ((l2_reg & 0x3) == 0)
-			seq_printf(m, ", async");
-		else if ((l2_reg & 0x3) == 1)
-			seq_printf(m, ", sync");
-		else
-			seq_printf(m, ", unknown type");
-
-		seq_printf(m, "\n");
-	} else {
-		seq_printf(m, "not present\n");
-	}
-
-	return 0;
-}
-
-static int
-prep_tiger1_cpuinfo(struct seq_file *m)
-{
-	unsigned int l2_reg = inb(PREP_IBM_L2INFO);
-
-	prep_ibm_cpuinfo(m);
-
-	/* report amount and type of L2 cache present */
-	seq_printf(m, "l2 cache\t: ");
-	if ((l2_reg & 0xf) == 0xf) {
-		seq_printf(m, "not present\n");
-	} else {
-		if (l2_reg & 0x8)
-			seq_printf(m, "async, ");
-		else
-			seq_printf(m, "sync burst, ");
-	
-		if (l2_reg & 0x4)
-			seq_printf(m, "parity, ");
-		else
-			seq_printf(m, "no parity, ");
-	
-		switch (l2_reg & 0x3) {
-			case 0x0:
-				seq_printf(m, "256KiB\n");
-				break;
-			case 0x1:
-				seq_printf(m, "512KiB\n");
-				break;
-			case 0x2:
-				seq_printf(m, "1MiB\n");
-				break;
-			default:
-				seq_printf(m, "unknown size\n");
-				break;
-		}
-	}
-
-	return 0;
-}
-
-
-/* Used by all Motorola PReP */
-static int
-prep_mot_cpuinfo(struct seq_file *m)
-{
-	unsigned int cachew = *((unsigned char *)CACHECRBA);
-
-	seq_printf(m, "machine\t\t: PReP %s\n", Motherboard_map_name);
-
-	/* report amount and type of L2 cache present */
-	seq_printf(m, "l2 cache\t: ");
-	switch (cachew & L2CACHE_MASK) {
-		case L2CACHE_512KB:
-			seq_printf(m, "512KiB");
-			break;
-		case L2CACHE_256KB:
-			seq_printf(m, "256KiB");
-			break;
-		case L2CACHE_1MB:
-			seq_printf(m, "1MiB");
-			break;
-		case L2CACHE_NONE:
-			seq_printf(m, "none\n");
-			goto no_l2;
-			break;
-		default:
-			seq_printf(m, "%x\n", cachew);
-	}
-
-	seq_printf(m, ", parity %s",
-			(cachew & L2CACHE_PARITY)? "enabled" : "disabled");
-
-	seq_printf(m, " SRAM:");
-
-	switch ( ((cachew & 0xf0) >> 4) & ~(0x3) ) {
-		case 1: seq_printf(m, "synchronous, parity, flow-through\n");
-				break;
-		case 2: seq_printf(m, "asynchronous, no parity\n");
-				break;
-		case 3: seq_printf(m, "asynchronous, parity\n");
-				break;
-		default:seq_printf(m, "synchronous, pipelined, no parity\n");
-				break;
-	}
-
-no_l2:
-	/* print info about SIMMs */
-	if (have_residual_data) {
-		int i;
-		seq_printf(m, "simms\t\t: ");
-		for (i = 0; (res->ActualNumMemories) && (i < MAX_MEMS); i++) {
-			if (res->Memories[i].SIMMSize != 0)
-				seq_printf(m, "%d:%ldM ", i,
-					(res->Memories[i].SIMMSize > 1024) ?
-					res->Memories[i].SIMMSize>>20 :
-					res->Memories[i].SIMMSize);
-		}
-		seq_printf(m, "\n");
-	}
-
-	return 0;
-}
-
-static void
-prep_restart(char *cmd)
-{
-#define PREP_SP92	0x92	/* Special Port 92 */
-	local_irq_disable(); /* no interrupts */
-
-	/* set exception prefix high - to the prom */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	/* make sure bit 0 (reset) is a 0 */
-	outb( inb(PREP_SP92) & ~1L , PREP_SP92);
-	/* signal a reset to system control port A - soft reset */
-	outb( inb(PREP_SP92) | 1 , PREP_SP92);
-
-	while ( 1 ) ;
-	/* not reached */
-#undef PREP_SP92
-}
-
-static void
-prep_halt(void)
-{
-	local_irq_disable(); /* no interrupts */
-
-	/* set exception prefix high - to the prom */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	while ( 1 ) ;
-	/* not reached */
-}
-
-/* Carrera is the power manager in the Thinkpads. Unfortunately not much is
- * known about it, so we can't power down.
- */
-static void
-prep_carrera_poweroff(void)
-{
-	prep_halt();
-}
-
-/*
- * On most IBM PReP's, power management is handled by a Signetics 87c750
- * behind the Utah component on the ISA bus. To access the 750 you must write
- * a series of nibbles to port 0x82a (decoded by the Utah). This is described
- * somewhat in the IBM Carolina Technical Specification.
- * -Hollis
- */
-static void
-utah_sig87c750_setbit(unsigned int bytenum, unsigned int bitnum, int value)
-{
-	/*
-	 * byte1: 0 0 0 1 0  d  a5 a4
-	 * byte2: 0 0 0 1 a3 a2 a1 a0
-	 *
-	 * d = the bit's value, enabled or disabled
-	 * (a5 a4 a3) = the byte number, minus 20
-	 * (a2 a1 a0) = the bit number
-	 *
-	 * example: set the 5th bit of byte 21 (21.5)
-	 *     a5 a4 a3 = 001 (byte 1)
-	 *     a2 a1 a0 = 101 (bit 5)
-	 *
-	 *     byte1 = 0001 0100 (0x14)
-	 *     byte2 = 0001 1101 (0x1d)
-	 */
-	unsigned char byte1=0x10, byte2=0x10;
-
-	/* the 750's '20.0' is accessed as '0.0' through Utah (which adds 20) */
-	bytenum -= 20;
-
-	byte1 |= (!!value) << 2;		/* set d */
-	byte1 |= (bytenum >> 1) & 0x3;	/* set a5, a4 */
-
-	byte2 |= (bytenum & 0x1) << 3;	/* set a3 */
-	byte2 |= bitnum & 0x7;			/* set a2, a1, a0 */
-
-	outb(byte1, PREP_IBM_PM1);	/* first nibble */
-	mb();
-	udelay(100);				/* important: let controller recover */
-
-	outb(byte2, PREP_IBM_PM1);	/* second nibble */
-	mb();
-	udelay(100);				/* important: let controller recover */
-}
-
-static void
-prep_sig750_poweroff(void)
-{
-	/* tweak the power manager found in most IBM PRePs (except Thinkpads) */
-
-	local_irq_disable();
-	/* set exception prefix high - to the prom */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	utah_sig87c750_setbit(21, 5, 1); /* set bit 21.5, "PMEXEC_OFF" */
-
-	while (1) ;
-	/* not reached */
-}
-
-static int
-prep_show_percpuinfo(struct seq_file *m, int i)
-{
-	/* PREP's without residual data will give incorrect values here */
-	seq_printf(m, "clock\t\t: ");
-	if (have_residual_data)
-		seq_printf(m, "%ldMHz\n",
-			   (res->VitalProductData.ProcessorHz > 1024) ?
-			   res->VitalProductData.ProcessorHz / 1000000 :
-			   res->VitalProductData.ProcessorHz);
-	else
-		seq_printf(m, "???\n");
-
-	return 0;
-}
-
-/*
- * Fill out screen_info according to the residual data. This allows us to use
- * at least vesafb.
- */
-static void __init
-prep_init_vesa(void)
-{
-#if     (defined(CONFIG_FB_VGA16) || defined(CONFIG_FB_VGA16_MODULE) || \
-	 defined(CONFIG_FB_VESA))
-	PPC_DEVICE *vgadev = NULL;
-
-	if (have_residual_data)
-		vgadev = residual_find_device(~0, NULL, DisplayController,
-							SVGAController, -1, 0);
-
-	if (vgadev != NULL) {
-		PnP_TAG_PACKET *pkt;
-
-		pkt = PnP_find_large_vendor_packet(
-				(unsigned char *)&res->DevicePnPHeap[vgadev->AllocatedOffset],
-				0x04, 0); /* 0x04 = Display Tag */
-		if (pkt != NULL) {
-			unsigned char *ptr = (unsigned char *)pkt;
-
-			if (ptr[4]) {
-				/* graphics mode */
-				screen_info.orig_video_isVGA = VIDEO_TYPE_VLFB;
-
-				screen_info.lfb_depth = ptr[4] * 8;
-
-				screen_info.lfb_width = swab16(*(short *)(ptr+6));
-				screen_info.lfb_height = swab16(*(short *)(ptr+8));
-				screen_info.lfb_linelength = swab16(*(short *)(ptr+10));
-
-				screen_info.lfb_base = swab32(*(long *)(ptr+12));
-				screen_info.lfb_size = swab32(*(long *)(ptr+20)) / 65536;
-			}
-		}
-	}
-#endif
-}
-
-/*
- * Set DBAT 2 to access 0x80000000 so early progress messages will work
- */
-static __inline__ void
-prep_set_bat(void)
-{
-	/* wait for all outstanding memory access to complete */
-	mb();
-
-	/* setup DBATs */
-	mtspr(SPRN_DBAT2U, 0x80001ffe);
-	mtspr(SPRN_DBAT2L, 0x8000002a);
-
-	/* wait for updates */
-	mb();
-}
-
-/*
- * IBM 3-digit status LED
- */
-static unsigned int ibm_statusled_base;
-
-static void
-ibm_statusled_progress(char *s, unsigned short hex);
-
-static int
-ibm_statusled_panic(struct notifier_block *dummy1, unsigned long dummy2,
-		    void * dummy3)
-{
-	ibm_statusled_progress(NULL, 0x505); /* SOS */
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block ibm_statusled_block = {
-	ibm_statusled_panic,
-	NULL,
-	INT_MAX /* try to do it first */
-};
-
-static void
-ibm_statusled_progress(char *s, unsigned short hex)
-{
-	static int notifier_installed;
-	/*
-	 * Progress uses 4 digits and we have only 3.  So, we map 0xffff to
-	 * 0xfff for display switch off.  Out of range values are mapped to
-	 * 0xeff, as I'm told 0xf00 and above are reserved for hardware codes.
-	 * Install the panic notifier when the display is first switched off.
-	 */
-	if (hex == 0xffff) {
-		hex = 0xfff;
-		if (!notifier_installed) {
-			++notifier_installed;
-			atomic_notifier_chain_register(&panic_notifier_list,
-						&ibm_statusled_block);
-		}
-	}
-	else
-		if (hex > 0xfff)
-			hex = 0xeff;
-
-	mb();
-	outw(hex, ibm_statusled_base);
-}
-
-static void __init
-ibm_statusled_init(void)
-{
-	/*
-	 * The IBM 3-digit LED display is specified in the residual data
-	 * as an operator panel device, type "System Status LED".  Find
-	 * that device and determine its address.  We validate all the
-	 * other parameters on the off-chance another, similar device
-	 * exists.
-	 */
-	if (have_residual_data) {
-		PPC_DEVICE *led;
-		PnP_TAG_PACKET *pkt;
-
-		led = residual_find_device(~0, NULL, SystemPeripheral,
-					   OperatorPanel, SystemStatusLED, 0);
-		if (!led)
-			return;
-
-		pkt = PnP_find_packet((unsigned char *)
-		       &res->DevicePnPHeap[led->AllocatedOffset], S8_Packet, 0);
-		if (!pkt)
-			return;
-
-		if (pkt->S8_Pack.IOInfo != ISAAddr16bit)
-			return;
-		if (*(unsigned short *)pkt->S8_Pack.RangeMin !=
-		    *(unsigned short *)pkt->S8_Pack.RangeMax)
-			return;
-		if (pkt->S8_Pack.IOAlign != 2)
-			return;
-		if (pkt->S8_Pack.IONum != 2)
-			return;
-
-		ibm_statusled_base = ld_le16((unsigned short *)
-					     (pkt->S8_Pack.RangeMin));
-		ppc_md.progress = ibm_statusled_progress;
-	}
-}
-
-static void __init
-prep_setup_arch(void)
-{
-	unsigned char reg;
-	int is_ide=0;
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000;
-
-	/* Lookup PCI host bridges */
-	prep_find_bridges();
-
-	/* Set up floppy in PS/2 mode */
-	outb(0x09, SIO_CONFIG_RA);
-	reg = inb(SIO_CONFIG_RD);
-	reg = (reg & 0x3F) | 0x40;
-	outb(reg, SIO_CONFIG_RD);
-	outb(reg, SIO_CONFIG_RD);	/* Have to write twice to change! */
-
-	switch ( _prep_type )
-	{
-	case _PREP_IBM:
-		reg = inb(PREP_IBM_PLANAR);
-		printk(KERN_INFO "IBM planar ID: %02x", reg);
-		switch (reg) {
-			case PREP_IBM_SANDALFOOT:
-				prep_gen_enable_l2();
-				setup_ibm_pci = prep_sandalfoot_setup_pci;
-				ppc_md.power_off = prep_sig750_poweroff;
-				ppc_md.show_cpuinfo = prep_sandalfoot_cpuinfo;
-				break;
-			case PREP_IBM_THINKPAD:
-				prep_gen_enable_l2();
-				setup_ibm_pci = prep_thinkpad_setup_pci;
-				ppc_md.power_off = prep_carrera_poweroff;
-				ppc_md.show_cpuinfo = prep_thinkpad_cpuinfo;
-				break;
-			default:
-				if (have_residual_data) {
-					prep_gen_enable_l2();
-					setup_ibm_pci = prep_residual_setup_pci;
-					ppc_md.power_off = prep_halt;
-					ppc_md.show_cpuinfo = prep_gen_cpuinfo;
-					break;
-				}
-				else
-					printk(" - unknown! Assuming Carolina");
-					/* fall through */
-			case PREP_IBM_CAROLINA_IDE_0:
-			case PREP_IBM_CAROLINA_IDE_1:
-			case PREP_IBM_CAROLINA_IDE_2:
-			case PREP_IBM_CAROLINA_IDE_3:
-				is_ide = 1;
-			case PREP_IBM_CAROLINA_SCSI_0:
-			case PREP_IBM_CAROLINA_SCSI_1:
-			case PREP_IBM_CAROLINA_SCSI_2:
-			case PREP_IBM_CAROLINA_SCSI_3:
-				prep_carolina_enable_l2();
-				setup_ibm_pci = prep_carolina_setup_pci;
-				ppc_md.power_off = prep_sig750_poweroff;
-				ppc_md.show_cpuinfo = prep_carolina_cpuinfo;
-				break;
-			case PREP_IBM_TIGER1_133:
-			case PREP_IBM_TIGER1_166:
-			case PREP_IBM_TIGER1_180:
-			case PREP_IBM_TIGER1_xxx:
-			case PREP_IBM_TIGER1_333:
-				prep_carolina_enable_l2();
-				setup_ibm_pci = prep_tiger1_setup_pci;
-				ppc_md.power_off = prep_sig750_poweroff;
-				ppc_md.show_cpuinfo = prep_tiger1_cpuinfo;
-				break;
-		}
-		printk("\n");
-
-		/* default root device */
-		if (is_ide)
-			ROOT_DEV = MKDEV(IDE0_MAJOR, 3);
-		else
-			ROOT_DEV = MKDEV(SCSI_DISK0_MAJOR, 3);
-
-		break;
-	case _PREP_Motorola:
-		prep_gen_enable_l2();
-		ppc_md.power_off = prep_halt;
-		ppc_md.show_cpuinfo = prep_mot_cpuinfo;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-		if (initrd_start)
-			ROOT_DEV = Root_RAM0;
-		else
-#endif
-#ifdef CONFIG_ROOT_NFS
-			ROOT_DEV = Root_NFS;
-#else
-			ROOT_DEV = Root_SDA2;
-#endif
-		break;
-	}
-
-	/* Read in NVRAM data */
-	init_prep_nvram();
-
-	/* if no bootargs, look in NVRAM */
-	if ( cmd_line[0] == '\0' ) {
-		char *bootargs;
-		 bootargs = prep_nvram_get_var("bootargs");
-		 if (bootargs != NULL) {
-			 strcpy(cmd_line, bootargs);
-			 /* again.. */
-			 strcpy(boot_command_line, cmd_line);
-		}
-	}
-
-	prep_init_vesa();
-
-	switch (_prep_type) {
-	case _PREP_Motorola:
-		raven_init();
-		break;
-	case _PREP_IBM:
-		ibm_prep_init();
-		break;
-	}
-
-#ifdef CONFIG_VGA_CONSOLE
-	/* vgacon.c needs to know where we mapped IO memory in io_block_mapping() */
-	vgacon_remap_base = 0xf0000000;
-	conswitchp = &vga_con;
-#endif
-}
-
-/*
- * First, see if we can get this information from the residual data.
- * This is important on some IBM PReP systems.  If we cannot, we let the
- * TODC code handle doing this.
- */
-static void __init
-prep_calibrate_decr(void)
-{
-	if (have_residual_data) {
-		unsigned long freq, divisor = 4;
-
-		if ( res->VitalProductData.ProcessorBusHz ) {
-			freq = res->VitalProductData.ProcessorBusHz;
-			printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-					(freq/divisor)/1000000,
-					(freq/divisor)%1000000);
-			tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000);
-			tb_ticks_per_jiffy = freq / HZ / divisor;
-		}
-	}
-	else
-		todc_calibrate_decr();
-}
-
-static void __init
-prep_init_IRQ(void)
-{
-	unsigned int pci_viddid, pci_did;
-
-	if (OpenPIC_Addr != NULL) {
-		openpic_init(NUM_8259_INTERRUPTS);
-		/* We have a cascade on OpenPIC IRQ 0, Linux IRQ 16 */
-		openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade",
-				       i8259_irq);
-	}
-
-	if (have_residual_data) {
-		i8259_init(residual_isapic_addr(), 0);
-		return;
-	}
-
-	/* If we have a Raven PCI bridge or a Hawk PCI bridge / Memory
-	 * controller, we poll (as they have a different int-ack address). */
-	early_read_config_dword(NULL, 0, 0, PCI_VENDOR_ID, &pci_viddid);
-	pci_did = (pci_viddid & 0xffff0000) >> 16;
-	if (((pci_viddid & 0xffff) == PCI_VENDOR_ID_MOTOROLA)
-			&& ((pci_did == PCI_DEVICE_ID_MOTOROLA_RAVEN)
-				|| (pci_did == PCI_DEVICE_ID_MOTOROLA_HAWK)))
-		i8259_init(0, 0);
-	else
-		/* PCI interrupt ack address given in section 6.1.8 of the
-		 * PReP specification. */
-		i8259_init(MPC10X_MAPA_PCI_INTACK_ADDR, 0);
-}
-
-#ifdef CONFIG_SMP
-/* PReP (MTX) support */
-static int __init
-smp_prep_probe(void)
-{
-	extern int mot_multi;
-
-	if (mot_multi) {
-		openpic_request_IPIs();
-		smp_hw_index[1] = 1;
-		return 2;
-	}
-
-	return 1;
-}
-
-static void __init
-smp_prep_kick_cpu(int nr)
-{
-	*(unsigned long *)KERNELBASE = nr;
-	asm volatile("dcbf 0,%0"::"r"(KERNELBASE):"memory");
-	printk("CPU1 released, waiting\n");
-}
-
-static void __init
-smp_prep_setup_cpu(int cpu_nr)
-{
-	if (OpenPIC_Addr)
-		do_openpic_setup_cpu();
-}
-
-static struct smp_ops_t prep_smp_ops = {
-	smp_openpic_message_pass,
-	smp_prep_probe,
-	smp_prep_kick_cpu,
-	smp_prep_setup_cpu,
-	.give_timebase = smp_generic_give_timebase,
-	.take_timebase = smp_generic_take_timebase,
-};
-#endif /* CONFIG_SMP */
-
-/*
- * Setup the bat mappings we're going to load that cover
- * the io areas.  RAM was mapped by mapin_ram().
- * -- Cort
- */
-static void __init
-prep_map_io(void)
-{
-	io_block_mapping(0x80000000, PREP_ISA_IO_BASE, 0x10000000, _PAGE_IO);
-	io_block_mapping(0xf0000000, PREP_ISA_MEM_BASE, 0x08000000, _PAGE_IO);
-}
-
-static int __init
-prep_request_io(void)
-{
-#ifdef CONFIG_NVRAM
-	request_region(PREP_NVRAM_AS0, 0x8, "nvram");
-#endif
-	request_region(0x00,0x20,"dma1");
-	request_region(0x40,0x20,"timer");
-	request_region(0x80,0x10,"dma page reg");
-	request_region(0xc0,0x20,"dma2");
-
-	return 0;
-}
-
-device_initcall(prep_request_io);
-
-void __init
-prep_init(unsigned long r3, unsigned long r4, unsigned long r5,
-		unsigned long r6, unsigned long r7)
-{
-#ifdef CONFIG_PREP_RESIDUAL
-	/* make a copy of residual data */
-	if ( r3 ) {
-		memcpy((void *)res,(void *)(r3+KERNELBASE),
-			 sizeof(RESIDUAL));
-	}
-#endif
-
-	isa_io_base = PREP_ISA_IO_BASE;
-	isa_mem_base = PREP_ISA_MEM_BASE;
-	pci_dram_offset = PREP_PCI_DRAM_OFFSET;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-	ppc_do_canonicalize_irqs = 1;
-
-	/* figure out what kind of prep workstation we are */
-	if (have_residual_data) {
-		if ( !strncmp(res->VitalProductData.PrintableModel,"IBM",3) )
-			_prep_type = _PREP_IBM;
-		else
-			_prep_type = _PREP_Motorola;
-	}
-	else {
-		/* assume motorola if no residual (netboot?) */
-		_prep_type = _PREP_Motorola;
-	}
-
-#ifdef CONFIG_PREP_RESIDUAL
-	/* Switch off all residual data processing if the user requests it */
-	if (strstr(cmd_line, "noresidual") != NULL)
-			res = NULL;
-#endif
-
-	/* Initialise progress early to get maximum benefit */
-	prep_set_bat();
-	ibm_statusled_init();
-
-	ppc_md.setup_arch     = prep_setup_arch;
-	ppc_md.show_percpuinfo = prep_show_percpuinfo;
-	ppc_md.show_cpuinfo   = NULL; /* set in prep_setup_arch() */
-	ppc_md.init_IRQ       = prep_init_IRQ;
-	/* this gets changed later on if we have an OpenPIC -- Cort */
-	ppc_md.get_irq        = i8259_irq;
-
-	ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
-
-	ppc_md.restart        = prep_restart;
-	ppc_md.power_off      = NULL; /* set in prep_setup_arch() */
-	ppc_md.halt           = prep_halt;
-
-	ppc_md.nvram_read_val = prep_nvram_read_val;
-	ppc_md.nvram_write_val = prep_nvram_write_val;
-
-	ppc_md.time_init      = todc_time_init;
-	if (_prep_type == _PREP_IBM) {
-		ppc_md.rtc_read_val = todc_mc146818_read_val;
-		ppc_md.rtc_write_val = todc_mc146818_write_val;
-		TODC_INIT(TODC_TYPE_MC146818, RTC_PORT(0), NULL, RTC_PORT(1),
-				8);
-	} else {
-		TODC_INIT(TODC_TYPE_MK48T59, PREP_NVRAM_AS0, PREP_NVRAM_AS1,
-				PREP_NVRAM_DATA, 8);
-	}
-
-	ppc_md.calibrate_decr = prep_calibrate_decr;
-	ppc_md.set_rtc_time   = todc_set_rtc_time;
-	ppc_md.get_rtc_time   = todc_get_rtc_time;
-
-	ppc_md.setup_io_mappings = prep_map_io;
-
-#ifdef CONFIG_SMP
-	smp_ops			 = &prep_smp_ops;
-#endif /* CONFIG_SMP */
-}
diff --git a/arch/ppc/platforms/prpmc750.c b/arch/ppc/platforms/prpmc750.c
deleted file mode 100644
index 93bd593cf957..000000000000
--- a/arch/ppc/platforms/prpmc750.c
+++ /dev/null
@@ -1,360 +0,0 @@
-/*
- * Board setup routines for Motorola PrPMC750
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/slab.h>
-#include <linux/serial_reg.h>
-
-#include <asm/byteorder.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/uaccess.h>
-#include <asm/time.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/hawk.h>
-
-#include "prpmc750.h"
-
-extern unsigned long loops_per_jiffy;
-
-extern void gen550_progress(char *, unsigned short);
-
-static u_char prpmc750_openpic_initsenses[] __initdata =
-{
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HOSTINT0 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UART */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_DEBUGINT */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HAWK_WDT */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UNUSED */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_ABORT */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HOSTINT1 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HOSTINT2 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_HOSTINT3 */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_PMC_INTA */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_PMC_INTB */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_PMC_INTC */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_PMC_INTD */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UNUSED */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UNUSED */
-    (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC750_INT_UNUSED */
-};
-
-/*
- * Motorola PrPMC750/PrPMC800 in PrPMCBASE or PrPMC-Carrier
- * Combined irq tables.  Only Base has IDSEL 14, only Carrier has 21 and 22.
- */
-static inline int
-prpmc_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *      PCI IDSEL/INTPIN->INTLINE
-	 *      A       B       C       D
-	 */
-	{
-		{12,	0,	0,	0},  /* IDSEL 14 - Ethernet, base */
-		{0,	0,	0,	0},  /* IDSEL 15 - unused */
-		{10,	11,	12,	9},  /* IDSEL 16 - PMC A1, PMC1 */
-		{10,	11,	12,	9},  /* IDSEL 17 - PrPMC-A-B, PMC2-B */
-		{11,	12,	9,	10}, /* IDSEL 18 - PMC A1-B, PMC1-B */
-		{0,	0,	0,	0},  /* IDSEL 19 - unused */
-		{9,	10,	11,	12}, /* IDSEL 20 - P2P Bridge */
-		{11,	12,	9,	10}, /* IDSEL 21 - PMC A2, carrier */
-		{12,	9,	10,	11}, /* IDSEL 22 - PMC A2-B, carrier */
-	};
-	const long min_idsel = 14, max_idsel = 22, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-static void __init prpmc750_pcibios_fixup(void)
-{
-	struct pci_dev *dev;
-	unsigned short wtmp;
-
-	/*
-	 * Kludge to clean up after PPC6BUG which doesn't
-	 * configure the CL5446 VGA card.  Also the
-	 * resource subsystem doesn't fixup the
-	 * PCI mem resources on the CL5446.
-	 */
-	if ((dev = pci_get_device(PCI_VENDOR_ID_CIRRUS,
-				   PCI_DEVICE_ID_CIRRUS_5446, 0))) {
-		dev->resource[0].start += PRPMC750_PCI_PHY_MEM_OFFSET;
-		dev->resource[0].end += PRPMC750_PCI_PHY_MEM_OFFSET;
-		pci_read_config_word(dev, PCI_COMMAND, &wtmp);
-		pci_write_config_word(dev, PCI_COMMAND, wtmp | 3);
-		/* Enable Color mode in MISC reg */
-		outb(0x03, 0x3c2);
-		/* Select DRAM config reg */
-		outb(0x0f, 0x3c4);
-		/* Set proper DRAM config */
-		outb(0xdf, 0x3c5);
-		pci_dev_put(dev);
-	}
-}
-
-void __init prpmc750_find_bridges(void)
-{
-	struct pci_controller *hose;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->io_base_virt = (void *)PRPMC750_ISA_IO_BASE;
-	hose->pci_mem_offset = PRPMC750_PCI_PHY_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			  PRPMC750_PCI_IO_START,
-			  PRPMC750_PCI_IO_END,
-			  IORESOURCE_IO, "PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			  PRPMC750_PROC_PCI_MEM_START,
-			  PRPMC750_PROC_PCI_MEM_END,
-			  IORESOURCE_MEM, "PCI host bridge");
-
-	hose->io_space.start = PRPMC750_PCI_IO_START;
-	hose->io_space.end = PRPMC750_PCI_IO_END;
-	hose->mem_space.start = PRPMC750_PCI_MEM_START;
-	hose->mem_space.end = PRPMC750_PCI_MEM_END - HAWK_MPIC_SIZE;
-
-	if (hawk_init(hose, PRPMC750_HAWK_PPC_REG_BASE,
-		      PRPMC750_PROC_PCI_MEM_START,
-		      PRPMC750_PROC_PCI_MEM_END - HAWK_MPIC_SIZE,
-		      PRPMC750_PROC_PCI_IO_START, PRPMC750_PROC_PCI_IO_END,
-		      PRPMC750_PROC_PCI_MEM_END - HAWK_MPIC_SIZE + 1)
-	    != 0) {
-		printk(KERN_CRIT "Could not initialize host bridge\n");
-	}
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pcibios_fixup = prpmc750_pcibios_fixup;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = prpmc_map_irq;
-}
-static int prpmc750_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "machine\t\t: PrPMC750\n");
-
-	return 0;
-}
-
-static void __init prpmc750_setup_arch(void)
-{
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000 / HZ;
-
-	/* Lookup PCI host bridges */
-	prpmc750_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	OpenPIC_InitSenses = prpmc750_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(prpmc750_openpic_initsenses);
-
-	printk(KERN_INFO "Port by MontaVista Software, Inc. "
-			"(source@mvista.com)\n");
-}
-
-/*
- * Compute the PrPMC750's bus speed using the baud clock as a
- * reference.
- */
-static unsigned long __init prpmc750_get_bus_speed(void)
-{
-	unsigned long tbl_start, tbl_end;
-	unsigned long current_state, old_state, bus_speed;
-	unsigned char lcr, dll, dlm;
-	int baud_divisor, count;
-
-	/* Read the UART's baud clock divisor */
-	lcr = readb(PRPMC750_SERIAL_0_LCR);
-	writeb(lcr | UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR);
-	dll = readb(PRPMC750_SERIAL_0_DLL);
-	dlm = readb(PRPMC750_SERIAL_0_DLM);
-	writeb(lcr & ~UART_LCR_DLAB, PRPMC750_SERIAL_0_LCR);
-	baud_divisor = (dlm << 8) | dll;
-
-	/*
-	 * Use the baud clock divisor and base baud clock
-	 * to determine the baud rate and use that as
-	 * the number of baud clock edges we use for
-	 * the time base sample.  Make it half the baud
-	 * rate.
-	 */
-	count = PRPMC750_BASE_BAUD / (baud_divisor * 16);
-
-	/* Find the first edge of the baud clock */
-	old_state = readb(PRPMC750_STATUS_REG) & PRPMC750_BAUDOUT_MASK;
-	do {
-		current_state = readb(PRPMC750_STATUS_REG) &
-		    PRPMC750_BAUDOUT_MASK;
-	} while (old_state == current_state);
-
-	old_state = current_state;
-
-	/* Get the starting time base value */
-	tbl_start = get_tbl();
-
-	/*
-	 * Loop until we have found a number of edges equal
-	 * to half the count (half the baud rate)
-	 */
-	do {
-		do {
-			current_state = readb(PRPMC750_STATUS_REG) &
-			    PRPMC750_BAUDOUT_MASK;
-		} while (old_state == current_state);
-		old_state = current_state;
-	} while (--count);
-
-	/* Get the ending time base value */
-	tbl_end = get_tbl();
-
-	/* Compute bus speed */
-	bus_speed = (tbl_end - tbl_start) * 128;
-
-	return bus_speed;
-}
-
-static void __init prpmc750_calibrate_decr(void)
-{
-	unsigned long freq;
-	int divisor = 4;
-
-	freq = prpmc750_get_bus_speed();
-
-	tb_ticks_per_jiffy = freq / (HZ * divisor);
-	tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
-}
-
-static void prpmc750_restart(char *cmd)
-{
-	local_irq_disable();
-	writeb(PRPMC750_MODRST_MASK, PRPMC750_MODRST_REG);
-	while (1) ;
-}
-
-static void prpmc750_halt(void)
-{
-	local_irq_disable();
-	while (1) ;
-}
-
-static void prpmc750_power_off(void)
-{
-	prpmc750_halt();
-}
-
-static void __init prpmc750_init_IRQ(void)
-{
-	openpic_init(0);
-}
-
-/*
- * Set BAT 3 to map 0xf0000000 to end of physical memory space.
- */
-static __inline__ void prpmc750_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf0001ffe);
-	mtspr(SPRN_DBAT1L, 0xf000002a);
-	mb();
-}
-
-/*
- * We need to read the Falcon/Hawk memory controller
- * to properly determine this value
- */
-static unsigned long __init prpmc750_find_end_of_memory(void)
-{
-	/* Read the memory size from the Hawk SMC */
-	return hawk_get_mem_size(PRPMC750_HAWK_SMC_BASE);
-}
-
-static void __init prpmc750_map_io(void)
-{
-	io_block_mapping(PRPMC750_ISA_IO_BASE, PRPMC750_ISA_IO_BASE,
-			 0x10000000, _PAGE_IO);
-#if 0
-	io_block_mapping(0xf0000000, 0xc0000000, 0x08000000, _PAGE_IO);
-#endif
-	io_block_mapping(0xf8000000, 0xf8000000, 0x08000000, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* Cover the Hawk registers with a BAT */
-	prpmc750_set_bat();
-
-	isa_io_base = PRPMC750_ISA_IO_BASE;
-	isa_mem_base = PRPMC750_ISA_MEM_BASE;
-	pci_dram_offset = PRPMC750_PCI_DRAM_OFFSET;
-
-	ppc_md.setup_arch = prpmc750_setup_arch;
-	ppc_md.show_cpuinfo = prpmc750_show_cpuinfo;
-	ppc_md.init_IRQ = prpmc750_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.find_end_of_memory = prpmc750_find_end_of_memory;
-	ppc_md.setup_io_mappings = prpmc750_map_io;
-
-	ppc_md.restart = prpmc750_restart;
-	ppc_md.power_off = prpmc750_power_off;
-	ppc_md.halt = prpmc750_halt;
-
-	/* PrPMC750 has no timekeeper part */
-	ppc_md.time_init = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.calibrate_decr = prpmc750_calibrate_decr;
-
-#ifdef  CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif				/* CONFIG_SERIAL_TEXT_DEBUG */
-}
diff --git a/arch/ppc/platforms/prpmc750.h b/arch/ppc/platforms/prpmc750.h
deleted file mode 100644
index c4dcff09d7ca..000000000000
--- a/arch/ppc/platforms/prpmc750.h
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * arch/ppc/platforms/prpmc750.h
- *
- * Definitions for Motorola PrPMC750 board support
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_PRPMC750_H__
-#define __ASM_PRPMC750_H__
-
-/*
- * Due to limitations imposed by legacy hardware (primarily IDE controllers),
- * the PrPMC750 carrier board operates using a PReP address map.
- *
- * From Processor (physical) -> PCI:
- *   PCI Mem Space: 0xc0000000 - 0xfe000000 -> 0x00000000 - 0x3e000000 (768 MB)
- *   PCI I/O Space: 0x80000000 - 0x90000000 -> 0x00000000 - 0x10000000 (256 MB)
- *	Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area
- *
- * From PCI -> Processor (physical):
- *   System Memory: 0x80000000 -> 0x00000000
- */
-
-#define PRPMC750_ISA_IO_BASE		PREP_ISA_IO_BASE
-#define PRPMC750_ISA_MEM_BASE		PREP_ISA_MEM_BASE
-
-/* PCI Memory space mapping info */
-#define PRPMC750_PCI_MEM_SIZE		0x30000000U
-#define PRPMC750_PROC_PCI_MEM_START	PRPMC750_ISA_MEM_BASE
-#define PRPMC750_PROC_PCI_MEM_END	(PRPMC750_PROC_PCI_MEM_START +	\
-					 PRPMC750_PCI_MEM_SIZE - 1)
-#define PRPMC750_PCI_MEM_START		0x00000000U
-#define PRPMC750_PCI_MEM_END		(PRPMC750_PCI_MEM_START +	\
-					 PRPMC750_PCI_MEM_SIZE - 1)
-
-/* PCI I/O space mapping info */
-#define PRPMC750_PCI_IO_SIZE		0x10000000U
-#define PRPMC750_PROC_PCI_IO_START	PRPMC750_ISA_IO_BASE
-#define PRPMC750_PROC_PCI_IO_END	(PRPMC750_PROC_PCI_IO_START +	\
-					 PRPMC750_PCI_IO_SIZE - 1)
-#define PRPMC750_PCI_IO_START		0x00000000U
-#define PRPMC750_PCI_IO_END		(PRPMC750_PCI_IO_START + 	\
-					 PRPMC750_PCI_IO_SIZE - 1)
-
-/* System memory mapping info */
-#define PRPMC750_PCI_DRAM_OFFSET	PREP_PCI_DRAM_OFFSET
-#define PRPMC750_PCI_PHY_MEM_OFFSET	(PRPMC750_ISA_MEM_BASE-PRPMC750_PCI_MEM_START)
-
-/* Register address definitions */
-#define PRPMC750_HAWK_SMC_BASE		0xfef80000U
-#define PRPMC750_HAWK_PPC_REG_BASE	0xfeff0000U
-
-#define PRPMC750_BASE_BAUD		1843200
-#define PRPMC750_SERIAL_0		0xfef88000
-#define PRPMC750_SERIAL_0_DLL		(PRPMC750_SERIAL_0 + (UART_DLL << 4))
-#define PRPMC750_SERIAL_0_DLM		(PRPMC750_SERIAL_0 + (UART_DLM << 4))
-#define PRPMC750_SERIAL_0_LCR		(PRPMC750_SERIAL_0 + (UART_LCR << 4))
-
-#define PRPMC750_STATUS_REG		0xfef88080
-#define PRPMC750_BAUDOUT_MASK		0x02
-#define PRPMC750_MONARCH_MASK		0x01
-
-#define PRPMC750_MODRST_REG		0xfef880a0
-#define PRPMC750_MODRST_MASK		0x01
-
-#define PRPMC750_PIRQ_REG		0xfef880b0
-#define PRPMC750_SEL1_MASK		0x02
-#define PRPMC750_SEL0_MASK		0x01
-
-#define PRPMC750_TBEN_REG		0xfef880c0
-#define PRPMC750_TBEN_MASK		0x01
-
-/* UART Defines. */
-#define RS_TABLE_SIZE  4
-
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define BASE_BAUD  (PRPMC750_BASE_BAUD / 16)
-
-#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
-
-#define SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, PRPMC750_SERIAL_0, 1, STD_COM_FLAGS, \
-		iomem_base: (unsigned char *)PRPMC750_SERIAL_0, \
-		iomem_reg_shift: 4, \
-		io_type: SERIAL_IO_MEM } /* ttyS0 */
-
-#endif				/* __ASM_PRPMC750_H__ */
-#endif				/* __KERNEL__ */
diff --git a/arch/ppc/platforms/prpmc800.c b/arch/ppc/platforms/prpmc800.c
deleted file mode 100644
index 5bcda7f92cd0..000000000000
--- a/arch/ppc/platforms/prpmc800.c
+++ /dev/null
@@ -1,472 +0,0 @@
-/*
- * Author: Dale Farnsworth <dale.farnsworth@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/harrier_defs.h>
-
-#include <asm/byteorder.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/bootinfo.h>
-#include <asm/harrier.h>
-
-#include "prpmc800.h"
-
-#define HARRIER_REVI_REG	(PRPMC800_HARRIER_XCSR_BASE+HARRIER_REVI_OFF)
-#define HARRIER_UCTL_REG	(PRPMC800_HARRIER_XCSR_BASE+HARRIER_UCTL_OFF)
-#define HARRIER_MISC_CSR_REG   (PRPMC800_HARRIER_XCSR_BASE+HARRIER_MISC_CSR_OFF)
-#define HARRIER_IFEVP_REG    (PRPMC800_HARRIER_MPIC_BASE+HARRIER_MPIC_IFEVP_OFF)
-#define HARRIER_IFEDE_REG    (PRPMC800_HARRIER_MPIC_BASE+HARRIER_MPIC_IFEDE_OFF)
-#define HARRIER_FEEN_REG	(PRPMC800_HARRIER_XCSR_BASE+HARRIER_FEEN_OFF)
-#define HARRIER_FEMA_REG	(PRPMC800_HARRIER_XCSR_BASE+HARRIER_FEMA_OFF)
-
-#define HARRIER_VENI_REG	(PRPMC800_HARRIER_XCSR_BASE + HARRIER_VENI_OFF)
-#define HARRIER_MISC_CSR	(PRPMC800_HARRIER_XCSR_BASE + \
-				 HARRIER_MISC_CSR_OFF)
-
-#define MONARCH	(monarch != 0)
-#define NON_MONARCH (monarch == 0)
-
-extern int mpic_init(void);
-extern unsigned long loops_per_jiffy;
-extern void gen550_progress(char *, unsigned short);
-
-static int monarch = 0;
-static int found_self = 0;
-static int self = 0;
-
-static u_char prpmc800_openpic_initsenses[] __initdata =
-{
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HOSTINT0 */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_DEBUGINT */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HARRIER_WDT */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HOSTINT1 */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HOSTINT2 */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HOSTINT3 */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_PMC_INTA */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_PMC_INTB */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_PMC_INTC */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_PMC_INTD */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_UNUSED */
-   (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* PRPMC800_INT_HARRIER_INT (UARTS, ABORT, DMA) */
-};
-
-/*
- * Motorola PrPMC750/PrPMC800 in PrPMCBASE or PrPMC-Carrier
- * Combined irq tables.  Only Base has IDSEL 14, only Carrier has 21 and 22.
- */
-static inline int
-prpmc_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *      PCI IDSEL/INTPIN->INTLINE
-	 *      A       B       C       D
-	 */
-	{
-		{12,	0,	0,	0},  /* IDSEL 14 - Ethernet, base */
-		{0,	0,	0,	0},  /* IDSEL 15 - unused */
-		{10,	11,	12,	9},  /* IDSEL 16 - PMC A1, PMC1 */
-		{10,	11,	12,	9},  /* IDSEL 17 - PrPMC-A-B, PMC2-B */
-		{11,	12,	9,	10}, /* IDSEL 18 - PMC A1-B, PMC1-B */
-		{0,	0,	0,	0},  /* IDSEL 19 - unused */
-		{9,	10,	11,	12}, /* IDSEL 20 - P2P Bridge */
-		{11,	12,	9,	10}, /* IDSEL 21 - PMC A2, carrier */
-		{12,	9,	10,	11}, /* IDSEL 22 - PMC A2-B, carrier */
-	};
-	const long min_idsel = 14, max_idsel = 22, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-};
-
-static int
-prpmc_read_config_dword(struct pci_controller *hose, u8 bus, u8 devfn,
-			int offset, u32 * val)
-{
-	/* paranoia */
-	if ((hose == NULL) ||
-	    (hose->cfg_addr == NULL) || (hose->cfg_data == NULL))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	out_be32(hose->cfg_addr, ((offset & 0xfc) << 24) | (devfn << 16)
-		 | ((bus - hose->bus_offset) << 8) | 0x80);
-	*val = in_le32((u32 *) (hose->cfg_data + (offset & 3)));
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-#define HARRIER_PCI_VEND_DEV_ID	(PCI_VENDOR_ID_MOTOROLA | \
-				 (PCI_DEVICE_ID_MOTOROLA_HARRIER << 16))
-static int prpmc_self(u8 bus, u8 devfn)
-{
-	/*
-	 * Harriers always view themselves as being on bus 0. If we're not
-	 * looking at bus 0, we're not going to find ourselves.
-	 */
-	if (bus != 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else {
-		int result;
-		int val;
-		struct pci_controller *hose;
-
-		hose = pci_bus_to_hose(bus);
-
-		/* See if target device is a Harrier */
-		result = prpmc_read_config_dword(hose, bus, devfn,
-						 PCI_VENDOR_ID, &val);
-		if ((result != PCIBIOS_SUCCESSFUL) ||
-		    (val != HARRIER_PCI_VEND_DEV_ID))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-		/*
-		 * LBA bit is set if target Harrier == initiating Harrier
-		 * (i.e. if we are reading our own PCI header).
-		 */
-		result = prpmc_read_config_dword(hose, bus, devfn,
-						 HARRIER_LBA_OFF, &val);
-		if ((result != PCIBIOS_SUCCESSFUL) ||
-		    ((val & HARRIER_LBA_MSK) != HARRIER_LBA_MSK))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-		/* It's us, save our location for later */
-		self = devfn;
-		found_self = 1;
-		return PCIBIOS_SUCCESSFUL;
-	}
-}
-
-static int prpmc_exclude_device(u8 bus, u8 devfn)
-{
-	/*
-	 * Monarch is allowed to access all PCI devices. Non-monarch is
-	 * only allowed to access its own Harrier.
-	 */
-
-	if (MONARCH)
-		return PCIBIOS_SUCCESSFUL;
-	if (found_self)
-		if ((bus == 0) && (devfn == self))
-			return PCIBIOS_SUCCESSFUL;
-		else
-			return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return prpmc_self(bus, devfn);
-}
-
-void __init prpmc800_find_bridges(void)
-{
-	struct pci_controller *hose;
-	int host_bridge;
-
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	ppc_md.pci_exclude_device = prpmc_exclude_device;
-	ppc_md.pcibios_fixup = NULL;
-	ppc_md.pcibios_fixup_bus = NULL;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = prpmc_map_irq;
-
-	setup_indirect_pci(hose,
-			   PRPMC800_PCI_CONFIG_ADDR, PRPMC800_PCI_CONFIG_DATA);
-
-	/* Get host bridge vendor/dev id */
-
-	host_bridge = in_be32((uint *) (HARRIER_VENI_REG));
-
-	if (host_bridge != HARRIER_VEND_DEV_ID) {
-		printk(KERN_CRIT "Host bridge 0x%x not supported\n",
-				host_bridge);
-		return;
-	}
-
-	monarch = in_be32((uint *) HARRIER_MISC_CSR) & HARRIER_SYSCON;
-
-	printk(KERN_INFO "Running as %s.\n",
-			MONARCH ? "Monarch" : "Non-Monarch");
-
-	hose->io_space.start = PRPMC800_PCI_IO_START;
-	hose->io_space.end = PRPMC800_PCI_IO_END;
-	hose->io_base_virt = (void *)PRPMC800_ISA_IO_BASE;
-	hose->pci_mem_offset = PRPMC800_PCI_PHY_MEM_OFFSET;
-
-	pci_init_resource(&hose->io_resource,
-			  PRPMC800_PCI_IO_START, PRPMC800_PCI_IO_END,
-			  IORESOURCE_IO, "PCI host bridge");
-
-	if (MONARCH) {
-		hose->mem_space.start = PRPMC800_PCI_MEM_START;
-		hose->mem_space.end = PRPMC800_PCI_MEM_END;
-
-		pci_init_resource(&hose->mem_resources[0],
-				  PRPMC800_PCI_MEM_START,
-				  PRPMC800_PCI_MEM_END,
-				  IORESOURCE_MEM, "PCI host bridge");
-
-		if (harrier_init(hose,
-				 PRPMC800_HARRIER_XCSR_BASE,
-				 PRPMC800_PROC_PCI_MEM_START,
-				 PRPMC800_PROC_PCI_MEM_END,
-				 PRPMC800_PROC_PCI_IO_START,
-				 PRPMC800_PROC_PCI_IO_END,
-				 PRPMC800_HARRIER_MPIC_BASE) != 0)
-			printk(KERN_CRIT "Could not initialize HARRIER "
-					 "bridge\n");
-
-		harrier_release_eready(PRPMC800_HARRIER_XCSR_BASE);
-		harrier_wait_eready(PRPMC800_HARRIER_XCSR_BASE);
-		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	} else {
-		pci_init_resource(&hose->mem_resources[0],
-				  PRPMC800_NM_PCI_MEM_START,
-				  PRPMC800_NM_PCI_MEM_END,
-				  IORESOURCE_MEM, "PCI host bridge");
-
-		hose->mem_space.start = PRPMC800_NM_PCI_MEM_START;
-		hose->mem_space.end = PRPMC800_NM_PCI_MEM_END;
-
-		if (harrier_init(hose,
-				 PRPMC800_HARRIER_XCSR_BASE,
-				 PRPMC800_NM_PROC_PCI_MEM_START,
-				 PRPMC800_NM_PROC_PCI_MEM_END,
-				 PRPMC800_PROC_PCI_IO_START,
-				 PRPMC800_PROC_PCI_IO_END,
-				 PRPMC800_HARRIER_MPIC_BASE) != 0)
-			printk(KERN_CRIT "Could not initialize HARRIER "
-					 "bridge\n");
-
-		harrier_setup_nonmonarch(PRPMC800_HARRIER_XCSR_BASE,
-					 HARRIER_ITSZ_1MB);
-		harrier_release_eready(PRPMC800_HARRIER_XCSR_BASE);
-	}
-}
-
-static int prpmc800_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "machine\t\t: PrPMC800\n");
-
-	return 0;
-}
-
-static void __init prpmc800_setup_arch(void)
-{
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000 / HZ;
-
-	/* Lookup PCI host bridges */
-	prpmc800_find_bridges();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA2;
-#endif
-
-	printk(KERN_INFO "Port by MontaVista Software, Inc. "
-			 "(source@mvista.com)\n");
-}
-
-/*
- * Compute the PrPMC800's tbl frequency using the baud clock as a reference.
- */
-static void __init prpmc800_calibrate_decr(void)
-{
-	unsigned long tbl_start, tbl_end;
-	unsigned long current_state, old_state, tb_ticks_per_second;
-	unsigned int count;
-	unsigned int harrier_revision;
-
-	harrier_revision = readb(HARRIER_REVI_REG);
-	if (harrier_revision < 2) {
-		/* XTAL64 was broken in harrier revision 1 */
-		printk(KERN_INFO "time_init: Harrier revision %d, assuming "
-				 "100 Mhz bus\n", harrier_revision);
-		tb_ticks_per_second = 100000000 / 4;
-		tb_ticks_per_jiffy = tb_ticks_per_second / HZ;
-		tb_to_us = mulhwu_scale_factor(tb_ticks_per_second, 1000000);
-		return;
-	}
-
-	/*
-	 * The XTAL64 bit oscillates at the 1/64 the base baud clock
-	 * Set count to XTAL64 cycles per second.  Since we'll count
-	 * half-cycles, we'll reach the count in half a second.
-	 */
-	count = PRPMC800_BASE_BAUD / 64;
-
-	/* Find the first edge of the baud clock */
-	old_state = readb(HARRIER_UCTL_REG) & HARRIER_XTAL64_MASK;
-	do {
-		current_state = readb(HARRIER_UCTL_REG) & HARRIER_XTAL64_MASK;
-	} while (old_state == current_state);
-
-	old_state = current_state;
-
-	/* Get the starting time base value */
-	tbl_start = get_tbl();
-
-	/*
-	 * Loop until we have found a number of edges (half-cycles)
-	 * equal to the count (half a second)
-	 */
-	do {
-		do {
-			current_state = readb(HARRIER_UCTL_REG) &
-			    HARRIER_XTAL64_MASK;
-		} while (old_state == current_state);
-		old_state = current_state;
-	} while (--count);
-
-	/* Get the ending time base value */
-	tbl_end = get_tbl();
-
-	/* We only counted for half a second, so double to get ticks/second */
-	tb_ticks_per_second = (tbl_end - tbl_start) * 2;
-	tb_ticks_per_jiffy = tb_ticks_per_second / HZ;
-	tb_to_us = mulhwu_scale_factor(tb_ticks_per_second, 1000000);
-}
-
-static void prpmc800_restart(char *cmd)
-{
-	ulong temp;
-
-	local_irq_disable();
-	temp = in_be32((uint *) HARRIER_MISC_CSR_REG);
-	temp |= HARRIER_RSTOUT;
-	out_be32((uint *) HARRIER_MISC_CSR_REG, temp);
-	while (1) ;
-}
-
-static void prpmc800_halt(void)
-{
-	local_irq_disable();
-	while (1) ;
-}
-
-static void prpmc800_power_off(void)
-{
-	prpmc800_halt();
-}
-
-static void __init prpmc800_init_IRQ(void)
-{
-	OpenPIC_InitSenses = prpmc800_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(prpmc800_openpic_initsenses);
-
-	/* Setup external interrupt sources. */
-	openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000);
-	/* Setup internal UART interrupt source. */
-	openpic_set_sources(16, 1, OpenPIC_Addr + 0x10200);
-
-	/* Do the MPIC initialization based on the above settings. */
-	openpic_init(0);
-
-	/* enable functional exceptions for uarts and abort */
-	out_8((u8 *) HARRIER_FEEN_REG, (HARRIER_FE_UA0 | HARRIER_FE_UA1));
-	out_8((u8 *) HARRIER_FEMA_REG, ~(HARRIER_FE_UA0 | HARRIER_FE_UA1));
-}
-
-/*
- * Set BAT 3 to map 0xf0000000 to end of physical memory space.
- */
-static __inline__ void prpmc800_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf0001ffe);
-	mtspr(SPRN_DBAT1L, 0xf000002a);
-	mb();
-}
-
-/*
- * We need to read the Harrier memory controller
- * to properly determine this value
- */
-static unsigned long __init prpmc800_find_end_of_memory(void)
-{
-	/* Read the memory size from the Harrier XCSR */
-	return harrier_get_mem_size(PRPMC800_HARRIER_XCSR_BASE);
-}
-
-static void __init prpmc800_map_io(void)
-{
-	io_block_mapping(0x80000000, 0x80000000, 0x10000000, _PAGE_IO);
-	io_block_mapping(0xf0000000, 0xf0000000, 0x10000000, _PAGE_IO);
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	prpmc800_set_bat();
-
-	isa_io_base = PRPMC800_ISA_IO_BASE;
-	isa_mem_base = PRPMC800_ISA_MEM_BASE;
-	pci_dram_offset = PRPMC800_PCI_DRAM_OFFSET;
-
-	ppc_md.setup_arch = prpmc800_setup_arch;
-	ppc_md.show_cpuinfo = prpmc800_show_cpuinfo;
-	ppc_md.init_IRQ = prpmc800_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.find_end_of_memory = prpmc800_find_end_of_memory;
-	ppc_md.setup_io_mappings = prpmc800_map_io;
-
-	ppc_md.restart = prpmc800_restart;
-	ppc_md.power_off = prpmc800_power_off;
-	ppc_md.halt = prpmc800_halt;
-
-	/* PrPMC800 has no timekeeper part */
-	ppc_md.time_init = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.calibrate_decr = prpmc800_calibrate_decr;
-#ifdef  CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#else				/* !CONFIG_SERIAL_TEXT_DEBUG */
-	ppc_md.progress = NULL;
-#endif				/* CONFIG_SERIAL_TEXT_DEBUG */
-}
diff --git a/arch/ppc/platforms/prpmc800.h b/arch/ppc/platforms/prpmc800.h
deleted file mode 100644
index 26f604e05cfa..000000000000
--- a/arch/ppc/platforms/prpmc800.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * arch/ppc/platforms/prpmc800.h
- *
- * Definitions for Motorola PrPMC800 board support
- *
- * Author: Dale Farnsworth <dale.farnsworth@mvista.com>
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
- /*
-  * From Processor to PCI:
-  *   PCI Mem Space: 0x80000000 - 0xa0000000 -> 0x80000000 - 0xa0000000 (512 MB)
-  *   PCI I/O Space: 0xfe400000 - 0xfeef0000 -> 0x00000000 - 0x00b00000 (11 MB)
-  *      Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area
-  *
-  * From PCI to Processor:
-  *   System Memory: 0x00000000 -> 0x00000000
-  */
-
-#ifndef __ASMPPC_PRPMC800_H
-#define __ASMPPC_PRPMC800_H
-
-#define PRPMC800_PCI_CONFIG_ADDR		0xfe000cf8
-#define PRPMC800_PCI_CONFIG_DATA		0xfe000cfc
-
-#define PRPMC800_PROC_PCI_IO_START		0xfe400000U
-#define PRPMC800_PROC_PCI_IO_END		0xfeefffffU
-#define PRPMC800_PCI_IO_START			0x00000000U
-#define PRPMC800_PCI_IO_END			0x00afffffU
-
-#define PRPMC800_PROC_PCI_MEM_START		0x80000000U
-#define PRPMC800_PROC_PCI_MEM_END		0x9fffffffU
-#define PRPMC800_PCI_MEM_START			0x80000000U
-#define PRPMC800_PCI_MEM_END			0x9fffffffU
-
-#define PRPMC800_NM_PROC_PCI_MEM_START		0x40000000U
-#define PRPMC800_NM_PROC_PCI_MEM_END		0xdfffffffU
-#define PRPMC800_NM_PCI_MEM_START		0x40000000U
-#define PRPMC800_NM_PCI_MEM_END			0xdfffffffU
-
-#define PRPMC800_PCI_DRAM_OFFSET		0x00000000U
-#define PRPMC800_PCI_PHY_MEM_OFFSET		0x00000000U
-
-#define PRPMC800_ISA_IO_BASE			PRPMC800_PROC_PCI_IO_START
-#define PRPMC800_ISA_MEM_BASE			0x00000000U
-
-#define PRPMC800_HARRIER_XCSR_BASE		HARRIER_DEFAULT_XCSR_BASE
-#define PRPMC800_HARRIER_MPIC_BASE		0xff000000
-
-#define PRPMC800_SERIAL_1			0xfeff00c0
-
-#define PRPMC800_BASE_BAUD			1843200
-
-/*
- * interrupt vector number and priority for harrier internal interrupt
- * sources
- */
-#define PRPMC800_INT_IRQ			16
-#define PRPMC800_INT_PRI			15
-
-/* UART Defines. */
-#define RS_TABLE_SIZE  4
-
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define BASE_BAUD (PRPMC800_BASE_BAUD / 16)
-
-#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF
-
-/* UARTS are at IRQ 16 */
-#define STD_SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, PRPMC800_SERIAL_1, 16, STD_COM_FLAGS, /* ttyS0 */\
-		iomem_base: (unsigned char *)PRPMC800_SERIAL_1,		\
-		iomem_reg_shift: 0,					\
-		io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-
-#endif				/* __ASMPPC_PRPMC800_H */
diff --git a/arch/ppc/platforms/radstone_ppc7d.c b/arch/ppc/platforms/radstone_ppc7d.c
deleted file mode 100644
index f1dee1e87809..000000000000
--- a/arch/ppc/platforms/radstone_ppc7d.c
+++ /dev/null
@@ -1,1492 +0,0 @@
-/*
- * Board setup routines for the Radstone PPC7D boards.
- *
- * Author: James Chapman <jchapman@katalix.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by - Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/* Radstone PPC7D boards are rugged VME boards with PPC 7447A CPUs,
- * Discovery-II, dual gigabit ethernet, dual PMC, USB, keyboard/mouse,
- * 4 serial ports, 2 high speed serial ports (MPSCs) and optional
- * SCSI / VGA.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h>		/* for linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-#include <linux/mv643xx.h>
-#include <linux/netdevice.h>
-#include <linux/platform_device.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/smp.h>
-#include <asm/vga.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/mpc10x.h>
-#include <asm/pci-bridge.h>
-#include <asm/mv64x60.h>
-
-#include "radstone_ppc7d.h"
-
-#undef DEBUG
-
-#define PPC7D_RST_PIN			17 	/* GPP17 */
-
-extern u32 mv64360_irq_base;
-extern spinlock_t rtc_lock;
-
-static struct mv64x60_handle bh;
-static int ppc7d_has_alma;
-
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_init(int, struct uart_port *);
-
-/* FIXME - move to h file */
-extern int ds1337_do_command(int id, int cmd, void *arg);
-#define DS1337_GET_DATE         0
-#define DS1337_SET_DATE         1
-
-/* residual data */
-unsigned char __res[sizeof(bd_t)];
-
-/*****************************************************************************
- * Serial port code
- *****************************************************************************/
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG)
-static void __init ppc7d_early_serial_map(void)
-{
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	mv64x60_progress_init(CONFIG_MV64X60_NEW_BASE);
-#elif defined(CONFIG_SERIAL_8250)
-	struct uart_port serial_req;
-
-	/* Setup serial port access */
-	memset(&serial_req, 0, sizeof(serial_req));
-	serial_req.uartclk = UART_CLK;
-	serial_req.irq = 4;
-	serial_req.flags = STD_COM_FLAGS;
-	serial_req.iotype = UPIO_MEM;
-	serial_req.membase = (u_char *) PPC7D_SERIAL_0;
-
-	gen550_init(0, &serial_req);
-	if (early_serial_setup(&serial_req) != 0)
-		printk(KERN_ERR "Early serial init of port 0 failed\n");
-
-	/* Assume early_serial_setup() doesn't modify serial_req */
-	serial_req.line = 1;
-	serial_req.irq = 3;
-	serial_req.membase = (u_char *) PPC7D_SERIAL_1;
-
-	gen550_init(1, &serial_req);
-	if (early_serial_setup(&serial_req) != 0)
-		printk(KERN_ERR "Early serial init of port 1 failed\n");
-#else
-#error CONFIG_KGDB || CONFIG_SERIAL_TEXT_DEBUG has no supported CONFIG_SERIAL_XXX
-#endif
-}
-#endif /* CONFIG_KGDB || CONFIG_SERIAL_TEXT_DEBUG */
-
-/*****************************************************************************
- * Low-level board support code
- *****************************************************************************/
-
-static unsigned long __init ppc7d_find_end_of_memory(void)
-{
-	bd_t *bp = (bd_t *) __res;
-
-	if (bp->bi_memsize)
-		return bp->bi_memsize;
-
-	return (256 * 1024 * 1024);
-}
-
-static void __init ppc7d_map_io(void)
-{
-	/* remove temporary mapping */
-	mtspr(SPRN_DBAT3U, 0x00000000);
-	mtspr(SPRN_DBAT3L, 0x00000000);
-
-	io_block_mapping(0xe8000000, 0xe8000000, 0x08000000, _PAGE_IO);
-	io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO);
-}
-
-static void ppc7d_restart(char *cmd)
-{
-	u32 data;
-
-	/* Disable GPP17 interrupt */
-	data = mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	data &= ~(1 << PPC7D_RST_PIN);
-	mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, data);
-
-	/* Configure MPP17 as GPP */
-	data = mv64x60_read(&bh, MV64x60_MPP_CNTL_2);
-	data &= ~(0x0000000f << 4);
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_2, data);
-
-	/* Enable pin GPP17 for output */
-	data = mv64x60_read(&bh, MV64x60_GPP_IO_CNTL);
-	data |= (1 << PPC7D_RST_PIN);
-	mv64x60_write(&bh, MV64x60_GPP_IO_CNTL, data);
-
-	/* Toggle GPP9 pin to reset the board */
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_CLR, 1 << PPC7D_RST_PIN);
-	mv64x60_write(&bh, MV64x60_GPP_VALUE_SET, 1 << PPC7D_RST_PIN);
-
-	for (;;) ;		/* Spin until reset happens */
-	/* NOTREACHED */
-}
-
-static void ppc7d_power_off(void)
-{
-	u32 data;
-
-	local_irq_disable();
-
-	/* Ensure that internal MV643XX watchdog is disabled.
-	 * The Disco watchdog uses MPP17 on this hardware.
-	 */
-	data = mv64x60_read(&bh, MV64x60_MPP_CNTL_2);
-	data &= ~(0x0000000f << 4);
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_2, data);
-
-	data = mv64x60_read(&bh, MV64x60_WDT_WDC);
-	if (data & 0x80000000) {
-		mv64x60_write(&bh, MV64x60_WDT_WDC, 1 << 24);
-		mv64x60_write(&bh, MV64x60_WDT_WDC, 2 << 24);
-	}
-
-	for (;;) ;		/* No way to shut power off with software */
-	/* NOTREACHED */
-}
-
-static void ppc7d_halt(void)
-{
-	ppc7d_power_off();
-	/* NOTREACHED */
-}
-
-static unsigned long ppc7d_led_no_pulse;
-
-static int __init ppc7d_led_pulse_disable(char *str)
-{
-	ppc7d_led_no_pulse = 1;
-	return 1;
-}
-
-/* This kernel option disables the heartbeat pulsing of a board LED */
-__setup("ledoff", ppc7d_led_pulse_disable);
-
-static void ppc7d_heartbeat(void)
-{
-	u32 data32;
-	u8 data8;
-	static int max706_wdog = 0;
-
-	/* Unfortunately we can't access the LED control registers
-	 * during early init because they're on the CPLD which is the
-	 * other side of a PCI bridge which goes unreachable during
-	 * PCI scan. So write the LEDs only if the MV64360 watchdog is
-	 * enabled (i.e. userspace apps are running so kernel is up)..
-	 */
-	data32 = mv64x60_read(&bh, MV64x60_WDT_WDC);
-	if (data32 & 0x80000000) {
-		/* Enable MAX706 watchdog if not done already */
-		if (!max706_wdog) {
-			outb(3, PPC7D_CPLD_RESET);
-			max706_wdog = 1;
-		}
-
-		/* Hit the MAX706 watchdog */
-		outb(0, PPC7D_CPLD_WATCHDOG_TRIG);
-
-		/* Pulse LED DS219 if not disabled */
-		if (!ppc7d_led_no_pulse) {
-			static int led_on = 0;
-
-			data8 = inb(PPC7D_CPLD_LEDS);
-			if (led_on)
-				data8 &= ~PPC7D_CPLD_LEDS_DS219_MASK;
-			else
-				data8 |= PPC7D_CPLD_LEDS_DS219_MASK;
-
-			outb(data8, PPC7D_CPLD_LEDS);
-			led_on = !led_on;
-		}
-	}
-	ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
-}
-
-static int ppc7d_show_cpuinfo(struct seq_file *m)
-{
-	u8 val;
-	u8 val1, val2;
-	static int flash_sizes[4] = { 64, 32, 0, 16 };
-	static int flash_banks[4] = { 4, 3, 2, 1 };
-	static int sdram_bank_sizes[4] = { 128, 256, 512, 1 };
-	int sdram_num_banks = 2;
-	static char *pci_modes[] = { "PCI33", "PCI66",
-		"Unknown", "Unknown",
-		"PCIX33", "PCIX66",
-		"PCIX100", "PCIX133"
-	};
-
-	seq_printf(m, "vendor\t\t: Radstone Technology\n");
-	seq_printf(m, "machine\t\t: PPC7D\n");
-
-	val = inb(PPC7D_CPLD_BOARD_REVISION);
-	val1 = (val & PPC7D_CPLD_BOARD_REVISION_NUMBER_MASK) >> 5;
-	val2 = (val & PPC7D_CPLD_BOARD_REVISION_LETTER_MASK);
-	seq_printf(m, "revision\t: %hd%c%c\n",
-		   val1,
-		   (val2 <= 0x18) ? 'A' + val2 : 'Y',
-		   (val2 > 0x18) ? 'A' + (val2 - 0x19) : ' ');
-
-	val = inb(PPC7D_CPLD_MOTHERBOARD_TYPE);
-	val1 = val & PPC7D_CPLD_MB_TYPE_PLL_MASK;
-	val2 = val & (PPC7D_CPLD_MB_TYPE_ECC_FITTED_MASK |
-		      PPC7D_CPLD_MB_TYPE_ECC_ENABLE_MASK);
-	seq_printf(m, "bus speed\t: %dMHz\n",
-		   (val1 == PPC7D_CPLD_MB_TYPE_PLL_133) ? 133 :
-		   (val1 == PPC7D_CPLD_MB_TYPE_PLL_100) ? 100 :
-		   (val1 == PPC7D_CPLD_MB_TYPE_PLL_64) ? 64 : 0);
-
-	val = inb(PPC7D_CPLD_MEM_CONFIG);
-	if (val & PPC7D_CPLD_SDRAM_BANK_NUM_MASK) sdram_num_banks--;
-
-	val = inb(PPC7D_CPLD_MEM_CONFIG_EXTEND);
-	val1 = (val & PPC7D_CPLD_SDRAM_BANK_SIZE_MASK) >> 6;
-	seq_printf(m, "SDRAM\t\t: %d banks of %d%c, total %d%c",
-		   sdram_num_banks,
-		   sdram_bank_sizes[val1],
-		   (sdram_bank_sizes[val1] < 128) ? 'G' : 'M',
-		   sdram_num_banks * sdram_bank_sizes[val1],
-		   (sdram_bank_sizes[val1] < 128) ? 'G' : 'M');
-	if (val2 & PPC7D_CPLD_MB_TYPE_ECC_FITTED_MASK) {
-		seq_printf(m, " [ECC %sabled]",
-			   (val2 & PPC7D_CPLD_MB_TYPE_ECC_ENABLE_MASK) ? "en" :
-			   "dis");
-	}
-	seq_printf(m, "\n");
-
-	val1 = (val & PPC7D_CPLD_FLASH_DEV_SIZE_MASK);
-	val2 = (val & PPC7D_CPLD_FLASH_BANK_NUM_MASK) >> 2;
-	seq_printf(m, "FLASH\t\t: %d banks of %dM, total %dM\n",
-		   flash_banks[val2], flash_sizes[val1],
-		   flash_banks[val2] * flash_sizes[val1]);
-
-	val = inb(PPC7D_CPLD_FLASH_WRITE_CNTL);
-	val1 = inb(PPC7D_CPLD_SW_FLASH_WRITE_PROTECT);
-	seq_printf(m, "  write links\t: %s%s%s%s\n",
-		   (val & PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK) ? "WRITE " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK) ? "BOOT " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK) ? "USER " : "",
-		   (val & (PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK |
-			   PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK |
-			   PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK)) ==
-		   0 ? "NONE" : "");
-	seq_printf(m, "  write sector h/w enables: %s%s%s%s%s\n",
-		   (val & PPD7D_CPLD_FLASH_CNTL_RECO_WR_MASK) ? "RECOVERY " :
-		   "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_BOOT_WR_MASK) ? "BOOT " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_USER_WR_MASK) ? "USER " : "",
-		   (val1 & PPC7D_CPLD_FLASH_CNTL_NVRAM_PROT_MASK) ? "NVRAM " :
-		   "",
-		   (((val &
-		      (PPD7D_CPLD_FLASH_CNTL_RECO_WR_MASK |
-		       PPD7D_CPLD_FLASH_CNTL_BOOT_WR_MASK |
-		       PPD7D_CPLD_FLASH_CNTL_BOOT_WR_MASK)) == 0)
-		    && ((val1 & PPC7D_CPLD_FLASH_CNTL_NVRAM_PROT_MASK) ==
-			0)) ? "NONE" : "");
-	val1 =
-	    inb(PPC7D_CPLD_SW_FLASH_WRITE_PROTECT) &
-	    (PPC7D_CPLD_SW_FLASH_WRPROT_SYSBOOT_MASK |
-	     PPC7D_CPLD_SW_FLASH_WRPROT_USER_MASK);
-	seq_printf(m, "  software sector enables: %s%s%s\n",
-		   (val1 & PPC7D_CPLD_SW_FLASH_WRPROT_SYSBOOT_MASK) ? "SYSBOOT "
-		   : "",
-		   (val1 & PPC7D_CPLD_SW_FLASH_WRPROT_USER_MASK) ? "USER " : "",
-		   (val1 == 0) ? "NONE " : "");
-
-	seq_printf(m, "Boot options\t: %s%s%s%s\n",
-		   (val & PPC7D_CPLD_FLASH_CNTL_ALTBOOT_LINK_MASK) ?
-		   "ALTERNATE " : "",
-		   (val & PPC7D_CPLD_FLASH_CNTL_VMEBOOT_LINK_MASK) ? "VME " :
-		   "",
-		   (val & PPC7D_CPLD_FLASH_CNTL_RECBOOT_LINK_MASK) ? "RECOVERY "
-		   : "",
-		   ((val &
-		     (PPC7D_CPLD_FLASH_CNTL_ALTBOOT_LINK_MASK |
-		      PPC7D_CPLD_FLASH_CNTL_VMEBOOT_LINK_MASK |
-		      PPC7D_CPLD_FLASH_CNTL_RECBOOT_LINK_MASK)) ==
-		    0) ? "NONE" : "");
-
-	val = inb(PPC7D_CPLD_EQUIPMENT_PRESENT_1);
-	seq_printf(m, "Fitted modules\t: %s%s%s%s\n",
-		   (val & PPC7D_CPLD_EQPT_PRES_1_PMC1_MASK) ? "" : "PMC1 ",
-		   (val & PPC7D_CPLD_EQPT_PRES_1_PMC2_MASK) ? "" : "PMC2 ",
-		   (val & PPC7D_CPLD_EQPT_PRES_1_AFIX_MASK) ? "AFIX " : "",
-		   ((val & (PPC7D_CPLD_EQPT_PRES_1_PMC1_MASK |
-			    PPC7D_CPLD_EQPT_PRES_1_PMC2_MASK |
-			    PPC7D_CPLD_EQPT_PRES_1_AFIX_MASK)) ==
-		    (PPC7D_CPLD_EQPT_PRES_1_PMC1_MASK |
-		     PPC7D_CPLD_EQPT_PRES_1_PMC2_MASK)) ? "NONE" : "");
-
-	if (val & PPC7D_CPLD_EQPT_PRES_1_AFIX_MASK) {
-		static const char *ids[] = {
-			"unknown",
-			"1553 (Dual Channel)",
-			"1553 (Single Channel)",
-			"8-bit SCSI + VGA",
-			"16-bit SCSI + VGA",
-			"1553 (Single Channel with sideband)",
-			"1553 (Dual Channel with sideband)",
-			NULL
-		};
-		u8 id = __raw_readb((void *)PPC7D_AFIX_REG_BASE + 0x03);
-		seq_printf(m, "AFIX module\t: 0x%hx [%s]\n", id,
-			   id < 7 ? ids[id] : "unknown");
-	}
-
-	val = inb(PPC7D_CPLD_PCI_CONFIG);
-	val1 = (val & PPC7D_CPLD_PCI_CONFIG_PCI0_MASK) >> 4;
-	val2 = (val & PPC7D_CPLD_PCI_CONFIG_PCI1_MASK);
-	seq_printf(m, "PCI#0\t\t: %s\nPCI#1\t\t: %s\n",
-		   pci_modes[val1], pci_modes[val2]);
-
-	val = inb(PPC7D_CPLD_EQUIPMENT_PRESENT_2);
-	seq_printf(m, "PMC1\t\t: %s\nPMC2\t\t: %s\n",
-		   (val & PPC7D_CPLD_EQPT_PRES_3_PMC1_V_MASK) ? "3.3v" : "5v",
-		   (val & PPC7D_CPLD_EQPT_PRES_3_PMC2_V_MASK) ? "3.3v" : "5v");
-	seq_printf(m, "PMC power source: %s\n",
-		   (val & PPC7D_CPLD_EQPT_PRES_3_PMC_POWER_MASK) ? "VME" :
-		   "internal");
-
-	val = inb(PPC7D_CPLD_EQUIPMENT_PRESENT_4);
-	val2 = inb(PPC7D_CPLD_EQUIPMENT_PRESENT_2);
-	seq_printf(m, "Fit options\t: %s%s%s%s%s%s%s\n",
-		   (val & PPC7D_CPLD_EQPT_PRES_4_LPT_MASK) ? "LPT " : "",
-		   (val & PPC7D_CPLD_EQPT_PRES_4_PS2_FITTED) ? "PS2 " : "",
-		   (val & PPC7D_CPLD_EQPT_PRES_4_USB2_FITTED) ? "USB2 " : "",
-		   (val2 & PPC7D_CPLD_EQPT_PRES_2_UNIVERSE_MASK) ? "VME " : "",
-		   (val2 & PPC7D_CPLD_EQPT_PRES_2_COM36_MASK) ? "COM3-6 " : "",
-		   (val2 & PPC7D_CPLD_EQPT_PRES_2_GIGE_MASK) ? "eth0 " : "",
-		   (val2 & PPC7D_CPLD_EQPT_PRES_2_DUALGIGE_MASK) ? "eth1 " :
-		   "");
-
-	val = inb(PPC7D_CPLD_ID_LINK);
-	val1 = val & (PPC7D_CPLD_ID_LINK_E6_MASK |
-		      PPC7D_CPLD_ID_LINK_E7_MASK |
-		      PPC7D_CPLD_ID_LINK_E12_MASK |
-		      PPC7D_CPLD_ID_LINK_E13_MASK);
-
-	val = inb(PPC7D_CPLD_FLASH_WRITE_CNTL) &
-	    (PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK |
-	     PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK |
-	     PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK);
-
-	seq_printf(m, "Board links present: %s%s%s%s%s%s%s%s\n",
-		   (val1 & PPC7D_CPLD_ID_LINK_E6_MASK) ? "E6 " : "",
-		   (val1 & PPC7D_CPLD_ID_LINK_E7_MASK) ? "E7 " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK) ? "E9 " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK) ? "E10 " : "",
-		   (val & PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK) ? "E11 " : "",
-		   (val1 & PPC7D_CPLD_ID_LINK_E12_MASK) ? "E12 " : "",
-		   (val1 & PPC7D_CPLD_ID_LINK_E13_MASK) ? "E13 " : "",
-		   ((val == 0) && (val1 == 0)) ? "NONE" : "");
-
-	val = inb(PPC7D_CPLD_WDOG_RESETSW_MASK);
-	seq_printf(m, "Front panel reset switch: %sabled\n",
-		   (val & PPC7D_CPLD_WDOG_RESETSW_MASK) ? "dis" : "en");
-
-	return 0;
-}
-
-static void __init ppc7d_calibrate_decr(void)
-{
-	ulong freq;
-
-	freq = 100000000 / 4;
-
-	pr_debug("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-		 freq / 1000000, freq % 1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-}
-
-/*****************************************************************************
- * Interrupt stuff
- *****************************************************************************/
-
-static irqreturn_t ppc7d_i8259_intr(int irq, void *dev_id)
-{
-	u32 temp = mv64x60_read(&bh, MV64x60_GPP_INTR_CAUSE);
-	if (temp & (1 << 28)) {
-		i8259_irq();
-		mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, temp & (~(1 << 28)));
-		return IRQ_HANDLED;
-	}
-
-	return IRQ_NONE;
-}
-
-/*
- * Each interrupt cause is assigned an IRQ number.
- * Southbridge has 16*2 (two 8259's) interrupts.
- * Discovery-II has 96 interrupts (cause-hi, cause-lo, gpp x 32).
- * If multiple interrupts are pending, get_irq() returns the
- * lowest pending irq number first.
- *
- *
- * IRQ #   Source                              Trig   Active
- * =============================================================
- *
- * Southbridge
- * -----------
- * IRQ #   Source                              Trig
- * =============================================================
- * 0       ISA High Resolution Counter         Edge
- * 1       Keyboard                            Edge
- * 2       Cascade From (IRQ 8-15)             Edge
- * 3       Com 2 (Uart 2)                      Edge
- * 4       Com 1 (Uart 1)                      Edge
- * 5       PCI Int D/AFIX IRQZ ID4 (2,7)       Level
- * 6       GPIO                                Level
- * 7       LPT                                 Edge
- * 8       RTC Alarm                           Edge
- * 9       PCI Int A/PMC 2/AFIX IRQW ID1 (2,0) Level
- * 10      PCI Int B/PMC 1/AFIX IRQX ID2 (2,1) Level
- * 11      USB2                                Level
- * 12      Mouse                               Edge
- * 13      Reserved internally by Ali M1535+
- * 14      PCI Int C/VME/AFIX IRQY ID3 (2,6)   Level
- * 15      COM 5/6                             Level
- *
- * 16..112 Discovery-II...
- *
- * MPP28   Southbridge                         Edge   High
- *
- *
- * Interrupts are cascaded through to the Discovery-II.
- *
- *  PCI ---
- *         \
- * CPLD --> ALI1535 -------> DISCOVERY-II
- *        INTF           MPP28
- */
-static void __init ppc7d_init_irq(void)
-{
-	int irq;
-
-	pr_debug("%s\n", __func__);
-	i8259_init(0, 0);
-	mv64360_init_irq();
-
-	/* IRQs 5,6,9,10,11,14,15 are level sensitive */
-	irq_desc[5].status |= IRQ_LEVEL;
-	irq_desc[6].status |= IRQ_LEVEL;
-	irq_desc[9].status |= IRQ_LEVEL;
-	irq_desc[10].status |= IRQ_LEVEL;
-	irq_desc[11].status |= IRQ_LEVEL;
-	irq_desc[14].status |= IRQ_LEVEL;
-	irq_desc[15].status |= IRQ_LEVEL;
-
-	/* GPP28 is edge triggered */
-	irq_desc[mv64360_irq_base + MV64x60_IRQ_GPP28].status &= ~IRQ_LEVEL;
-}
-
-static u32 ppc7d_irq_canonicalize(u32 irq)
-{
-	if ((irq >= 16) && (irq < (16 + 96)))
-		irq -= 16;
-
-	return irq;
-}
-
-static int ppc7d_get_irq(void)
-{
-	int irq;
-
-	irq = mv64360_get_irq();
-	if (irq == (mv64360_irq_base + MV64x60_IRQ_GPP28))
-		irq = i8259_irq();
-	return irq;
-}
-
-/*
- * 9       PCI Int A/PMC 2/AFIX IRQW ID1 (2,0) Level
- * 10      PCI Int B/PMC 1/AFIX IRQX ID2 (2,1) Level
- * 14      PCI Int C/VME/AFIX IRQY ID3 (2,6)   Level
- * 5       PCI Int D/AFIX IRQZ ID4 (2,7)       Level
- */
-static int __init ppc7d_map_irq(struct pci_dev *dev, unsigned char idsel,
-				unsigned char pin)
-{
-	static const char pci_irq_table[][4] =
-	    /*
-	     *      PCI IDSEL/INTPIN->INTLINE
-	     *         A   B   C   D
-	     */
-	{
-		{10, 14, 5, 9},	/* IDSEL 10 - PMC2 / AFIX IRQW */
-		{9, 10, 14, 5},	/* IDSEL 11 - PMC1 / AFIX IRQX */
-		{5, 9, 10, 14},	/* IDSEL 12 - AFIX IRQY */
-		{14, 5, 9, 10},	/* IDSEL 13 - AFIX IRQZ */
-	};
-	const long min_idsel = 10, max_idsel = 14, irqs_per_slot = 4;
-
-	pr_debug("%s: %04x/%04x/%x: idsel=%hx pin=%hu\n", __func__,
-		 dev->vendor, dev->device, PCI_FUNC(dev->devfn), idsel, pin);
-
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-void __init ppc7d_intr_setup(void)
-{
-	u32 data;
-
-	/*
-	 * Define GPP 28 interrupt polarity as active high
-	 * input signal and level triggered
-	 */
-	data = mv64x60_read(&bh, MV64x60_GPP_LEVEL_CNTL);
-	data &= ~(1 << 28);
-	mv64x60_write(&bh, MV64x60_GPP_LEVEL_CNTL, data);
-	data = mv64x60_read(&bh, MV64x60_GPP_IO_CNTL);
-	data &= ~(1 << 28);
-	mv64x60_write(&bh, MV64x60_GPP_IO_CNTL, data);
-
-	/* Config GPP intr ctlr to respond to level trigger */
-	data = mv64x60_read(&bh, MV64x60_COMM_ARBITER_CNTL);
-	data |= (1 << 10);
-	mv64x60_write(&bh, MV64x60_COMM_ARBITER_CNTL, data);
-
-	/* XXXX Erranum FEr PCI-#8 */
-	data = mv64x60_read(&bh, MV64x60_PCI0_CMD);
-	data &= ~((1 << 5) | (1 << 9));
-	mv64x60_write(&bh, MV64x60_PCI0_CMD, data);
-	data = mv64x60_read(&bh, MV64x60_PCI1_CMD);
-	data &= ~((1 << 5) | (1 << 9));
-	mv64x60_write(&bh, MV64x60_PCI1_CMD, data);
-
-	/*
-	 * Dismiss and then enable interrupt on GPP interrupt cause
-	 * for CPU #0
-	 */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, ~(1 << 28));
-	data = mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	data |= (1 << 28);
-	mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, data);
-
-	/*
-	 * Dismiss and then enable interrupt on CPU #0 high cause reg
-	 * BIT27 summarizes GPP interrupts 23-31
-	 */
-	mv64x60_write(&bh, MV64360_IC_MAIN_CAUSE_HI, ~(1 << 27));
-	data = mv64x60_read(&bh, MV64360_IC_CPU0_INTR_MASK_HI);
-	data |= (1 << 27);
-	mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI, data);
-}
-
-/*****************************************************************************
- * Platform device data fixup routines.
- *****************************************************************************/
-
-#if defined(CONFIG_SERIAL_MPSC)
-static void __init ppc7d_fixup_mpsc_pdata(struct platform_device *pdev)
-{
-	struct mpsc_pdata *pdata;
-
-	pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
-
-	pdata->max_idle = 40;
-	pdata->default_baud = PPC7D_DEFAULT_BAUD;
-	pdata->brg_clk_src = PPC7D_MPSC_CLK_SRC;
-	pdata->brg_clk_freq = PPC7D_MPSC_CLK_FREQ;
-
-	return;
-}
-#endif
-
-#if defined(CONFIG_MV643XX_ETH)
-static void __init ppc7d_fixup_eth_pdata(struct platform_device *pdev)
-{
-	struct mv643xx_eth_platform_data *eth_pd;
-	static u16 phy_addr[] = {
-		PPC7D_ETH0_PHY_ADDR,
-		PPC7D_ETH1_PHY_ADDR,
-		PPC7D_ETH2_PHY_ADDR,
-	};
-	int i;
-
-	eth_pd = pdev->dev.platform_data;
-	eth_pd->force_phy_addr = 1;
-	eth_pd->phy_addr = phy_addr[pdev->id];
-	eth_pd->tx_queue_size = PPC7D_ETH_TX_QUEUE_SIZE;
-	eth_pd->rx_queue_size = PPC7D_ETH_RX_QUEUE_SIZE;
-
-	/* Adjust IRQ by mv64360_irq_base */
-	for (i = 0; i < pdev->num_resources; i++) {
-		struct resource *r = &pdev->resource[i];
-
-		if (r->flags & IORESOURCE_IRQ) {
-			r->start += mv64360_irq_base;
-			r->end += mv64360_irq_base;
-			pr_debug("%s, uses IRQ %d\n", pdev->name,
-				 (int)r->start);
-		}
-	}
-
-}
-#endif
-
-#if defined(CONFIG_I2C_MV64XXX)
-static void __init
-ppc7d_fixup_i2c_pdata(struct platform_device *pdev)
-{
-	struct mv64xxx_i2c_pdata *pdata;
-	int i;
-
-	pdata = pdev->dev.platform_data;
-	if (pdata == NULL) {
-		pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
-		if (pdata == NULL)
-			return;
-
-		pdev->dev.platform_data = pdata;
-	}
-
-	/* divisors M=8, N=3 for 100kHz I2C from 133MHz system clock */
-	pdata->freq_m = 8;
-	pdata->freq_n = 3;
-	pdata->timeout = 500;
-	pdata->retries = 3;
-
-	/* Adjust IRQ by mv64360_irq_base */
-	for (i = 0; i < pdev->num_resources; i++) {
-		struct resource *r = &pdev->resource[i];
-
-		if (r->flags & IORESOURCE_IRQ) {
-			r->start += mv64360_irq_base;
-			r->end += mv64360_irq_base;
-			pr_debug("%s, uses IRQ %d\n", pdev->name, (int) r->start);
-		}
-	}
-}
-#endif
-
-static int ppc7d_platform_notify(struct device *dev)
-{
-	static struct {
-		char *bus_id;
-		void ((*rtn) (struct platform_device * pdev));
-	} dev_map[] = {
-#if defined(CONFIG_SERIAL_MPSC)
-		{ MPSC_CTLR_NAME ".0", ppc7d_fixup_mpsc_pdata },
-		{ MPSC_CTLR_NAME ".1", ppc7d_fixup_mpsc_pdata },
-#endif
-#if defined(CONFIG_MV643XX_ETH)
-		{ MV643XX_ETH_NAME ".0", ppc7d_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".1", ppc7d_fixup_eth_pdata },
-		{ MV643XX_ETH_NAME ".2", ppc7d_fixup_eth_pdata },
-#endif
-#if defined(CONFIG_I2C_MV64XXX)
-		{ MV64XXX_I2C_CTLR_NAME ".0", ppc7d_fixup_i2c_pdata },
-#endif
-	};
-	struct platform_device *pdev;
-	int i;
-
-	if (dev && dev->bus_id)
-		for (i = 0; i < ARRAY_SIZE(dev_map); i++)
-			if (!strncmp(dev->bus_id, dev_map[i].bus_id,
-				     BUS_ID_SIZE)) {
-
-				pdev = container_of(dev,
-						    struct platform_device,
-						    dev);
-				dev_map[i].rtn(pdev);
-			}
-
-	return 0;
-}
-
-/*****************************************************************************
- * PCI device fixups.
- * These aren't really fixups per se. They are used to init devices as they
- * are found during PCI scan.
- *
- * The PPC7D has an HB8 PCI-X bridge which must be set up during a PCI
- * scan in order to find other devices on its secondary side.
- *****************************************************************************/
-
-static void __init ppc7d_fixup_hb8(struct pci_dev *dev)
-{
-	u16 val16;
-
-	if (dev->bus->number == 0) {
-		pr_debug("PCI: HB8 init\n");
-
-		pci_write_config_byte(dev, 0x1c,
-				      ((PPC7D_PCI0_IO_START_PCI_ADDR & 0xf000)
-				       >> 8) | 0x01);
-		pci_write_config_byte(dev, 0x1d,
-				      (((PPC7D_PCI0_IO_START_PCI_ADDR +
-					 PPC7D_PCI0_IO_SIZE -
-					 1) & 0xf000) >> 8) | 0x01);
-		pci_write_config_word(dev, 0x30,
-				      PPC7D_PCI0_IO_START_PCI_ADDR >> 16);
-		pci_write_config_word(dev, 0x32,
-				      ((PPC7D_PCI0_IO_START_PCI_ADDR +
-					PPC7D_PCI0_IO_SIZE -
-					1) >> 16) & 0xffff);
-
-		pci_write_config_word(dev, 0x20,
-				      PPC7D_PCI0_MEM0_START_PCI_LO_ADDR >> 16);
-		pci_write_config_word(dev, 0x22,
-				      ((PPC7D_PCI0_MEM0_START_PCI_LO_ADDR +
-					PPC7D_PCI0_MEM0_SIZE -
-					1) >> 16) & 0xffff);
-		pci_write_config_word(dev, 0x24, 0);
-		pci_write_config_word(dev, 0x26, 0);
-		pci_write_config_dword(dev, 0x28, 0);
-		pci_write_config_dword(dev, 0x2c, 0);
-
-		pci_read_config_word(dev, 0x3e, &val16);
-		val16 |= ((1 << 5) | (1 << 1));	/* signal master aborts and
-						 * SERR to primary
-						 */
-		val16 &= ~(1 << 2);		/* ISA disable, so all ISA
-						 * ports forwarded to secondary
-						 */
-		pci_write_config_word(dev, 0x3e, val16);
-	}
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0028, ppc7d_fixup_hb8);
-
-/* This should perhaps be a separate driver as we're actually initializing
- * the chip for this board here. It's hardly a fixup...
- */
-static void __init ppc7d_fixup_ali1535(struct pci_dev *dev)
-{
-	pr_debug("PCI: ALI1535 init\n");
-
-	if (dev->bus->number == 1) {
-		/* Configure the ISA Port Settings */
-		pci_write_config_byte(dev, 0x43, 0x00);
-
-		/* Disable PCI Interrupt polling mode */
-		pci_write_config_byte(dev, 0x45, 0x00);
-
-		/* Multifunction pin select INTFJ -> INTF */
-		pci_write_config_byte(dev, 0x78, 0x00);
-
-		/* Set PCI INT -> IRQ Routing control in for external
-		 * pins south bridge.
-		 */
-		pci_write_config_byte(dev, 0x48, 0x31);	/* [7-4] INT B -> IRQ10
-							 * [3-0] INT A -> IRQ9
-							 */
-		pci_write_config_byte(dev, 0x49, 0x5D);	/* [7-4] INT D -> IRQ5
-							 * [3-0] INT C -> IRQ14
-							 */
-
-		/* PPC7D setup */
-		/* NEC USB device on IRQ 11 (INTE) - INTF disabled */
-		pci_write_config_byte(dev, 0x4A, 0x09);
-
-		/* GPIO on IRQ 6 */
-		pci_write_config_byte(dev, 0x76, 0x07);
-
-		/* SIRQ I (COMS 5/6) use IRQ line 15.
-		 * Positive (not subtractive) address decode.
-		 */
-		pci_write_config_byte(dev, 0x44, 0x0f);
-
-		/* SIRQ II disabled */
-		pci_write_config_byte(dev, 0x75, 0x0);
-
-		/* On board USB and RTC disabled */
-		pci_write_config_word(dev, 0x52, (1 << 14));
-		pci_write_config_byte(dev, 0x74, 0x00);
-
-		/* On board IDE disabled */
-		pci_write_config_byte(dev, 0x58, 0x00);
-
-		/* Decode 32-bit addresses */
-		pci_write_config_byte(dev, 0x5b, 0);
-
-		/* Disable docking IO */
-		pci_write_config_word(dev, 0x5c, 0x0000);
-
-		/* Disable modem, enable sound */
-		pci_write_config_byte(dev, 0x77, (1 << 6));
-
-		/* Disable hot-docking mode */
-		pci_write_config_byte(dev, 0x7d, 0x00);
-	}
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1533, ppc7d_fixup_ali1535);
-
-static int ppc7d_pci_exclude_device(u8 bus, u8 devfn)
-{
-	/* Early versions of this board were fitted with IBM ALMA
-	 * PCI-VME bridge chips. The PCI config space of these devices
-	 * was not set up correctly and causes PCI scan problems.
-	 */
-	if ((bus == 1) && (PCI_SLOT(devfn) == 4) && ppc7d_has_alma)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	return mv64x60_pci_exclude_device(bus, devfn);
-}
-
-/* This hook is called when each PCI bus is probed.
- */
-static void ppc7d_pci_fixup_bus(struct pci_bus *bus)
-{
-	pr_debug("PCI BUS %hu: %lx/%lx %lx/%lx %lx/%lx %lx/%lx\n",
-		 bus->number,
-		 bus->resource[0] ? bus->resource[0]->start : 0,
-		 bus->resource[0] ? bus->resource[0]->end : 0,
-		 bus->resource[1] ? bus->resource[1]->start : 0,
-		 bus->resource[1] ? bus->resource[1]->end : 0,
-		 bus->resource[2] ? bus->resource[2]->start : 0,
-		 bus->resource[2] ? bus->resource[2]->end : 0,
-		 bus->resource[3] ? bus->resource[3]->start : 0,
-		 bus->resource[3] ? bus->resource[3]->end : 0);
-
-	if ((bus->number == 1) && (bus->resource[2] != NULL)) {
-		/* Hide PCI window 2 of Bus 1 which is used only to
-		 * map legacy ISA memory space.
-		 */
-		bus->resource[2]->start = 0;
-		bus->resource[2]->end = 0;
-		bus->resource[2]->flags = 0;
-	}
-}
-
-/*****************************************************************************
- * Board device setup code
- *****************************************************************************/
-
-void __init ppc7d_setup_peripherals(void)
-{
-	u32 val32;
-
-	/* Set up windows for boot CS */
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2BOOT_WIN,
-				 PPC7D_BOOT_WINDOW_BASE, PPC7D_BOOT_WINDOW_SIZE,
-				 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2BOOT_WIN);
-
-	/* Boot firmware configures the following DevCS addresses.
-	 * DevCS0 - board control/status
-	 * DevCS1 - test registers
-	 * DevCS2 - AFIX port/address registers (for identifying)
-	 * DevCS3 - FLASH
-	 *
-	 * We don't use DevCS0, DevCS1.
-	 */
-	val32 = mv64x60_read(&bh, MV64360_CPU_BAR_ENABLE);
-	val32 |= ((1 << 4) | (1 << 5));
-	mv64x60_write(&bh, MV64360_CPU_BAR_ENABLE, val32);
-	mv64x60_write(&bh, MV64x60_CPU2DEV_0_BASE, 0);
-	mv64x60_write(&bh, MV64x60_CPU2DEV_0_SIZE, 0);
-	mv64x60_write(&bh, MV64x60_CPU2DEV_1_BASE, 0);
-	mv64x60_write(&bh, MV64x60_CPU2DEV_1_SIZE, 0);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_2_WIN,
-				 PPC7D_AFIX_REG_BASE, PPC7D_AFIX_REG_SIZE, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_2_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2DEV_3_WIN,
-				 PPC7D_FLASH_BASE, PPC7D_FLASH_SIZE_ACTUAL, 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2DEV_3_WIN);
-
-	mv64x60_set_32bit_window(&bh, MV64x60_CPU2SRAM_WIN,
-				 PPC7D_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE,
-				 0);
-	bh.ci->enable_window_32bit(&bh, MV64x60_CPU2SRAM_WIN);
-
-	/* Set up Enet->SRAM window */
-	mv64x60_set_32bit_window(&bh, MV64x60_ENET2MEM_4_WIN,
-				 PPC7D_INTERNAL_SRAM_BASE, MV64360_SRAM_SIZE,
-				 0x2);
-	bh.ci->enable_window_32bit(&bh, MV64x60_ENET2MEM_4_WIN);
-
-	/* Give enet r/w access to memory region */
-	val32 = mv64x60_read(&bh, MV64360_ENET2MEM_ACC_PROT_0);
-	val32 |= (0x3 << (4 << 1));
-	mv64x60_write(&bh, MV64360_ENET2MEM_ACC_PROT_0, val32);
-	val32 = mv64x60_read(&bh, MV64360_ENET2MEM_ACC_PROT_1);
-	val32 |= (0x3 << (4 << 1));
-	mv64x60_write(&bh, MV64360_ENET2MEM_ACC_PROT_1, val32);
-	val32 = mv64x60_read(&bh, MV64360_ENET2MEM_ACC_PROT_2);
-	val32 |= (0x3 << (4 << 1));
-	mv64x60_write(&bh, MV64360_ENET2MEM_ACC_PROT_2, val32);
-
-	val32 = mv64x60_read(&bh, MV64x60_TIMR_CNTR_0_3_CNTL);
-	val32 &= ~((1 << 0) | (1 << 8) | (1 << 16) | (1 << 24));
-	mv64x60_write(&bh, MV64x60_TIMR_CNTR_0_3_CNTL, val32);
-
-	/* Enumerate pci bus.
-	 *
-	 * We scan PCI#0 first (the bus with the HB8 and other
-	 * on-board peripherals). We must configure the 64360 before
-	 * each scan, according to the bus number assignments.  Busses
-	 * are assigned incrementally, starting at 0.  PCI#0 is
-	 * usually assigned bus#0, the secondary side of the HB8 gets
-	 * bus#1 and PCI#1 (second PMC site) gets bus#2.  However, if
-	 * any PMC card has a PCI bridge, these bus assignments will
-	 * change.
-	 */
-
-	/* Turn off PCI retries */
-	val32 = mv64x60_read(&bh, MV64x60_CPU_CONFIG);
-	val32 |= (1 << 17);
-	mv64x60_write(&bh, MV64x60_CPU_CONFIG, val32);
-
-	/* Scan PCI#0 */
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->last_busno = pciauto_bus_scan(bh.hose_a, 0);
-	printk(KERN_INFO "PCI#0: first=%d last=%d\n",
-	       bh.hose_a->first_busno, bh.hose_a->last_busno);
-
-	/* Scan PCI#1 */
-	bh.hose_b->first_busno = bh.hose_a->last_busno + 1;
-	mv64x60_set_bus(&bh, 1, bh.hose_b->first_busno);
-	bh.hose_b->last_busno = 0xff;
-	bh.hose_b->last_busno = pciauto_bus_scan(bh.hose_b,
-		bh.hose_b->first_busno);
-	printk(KERN_INFO "PCI#1: first=%d last=%d\n",
-	       bh.hose_b->first_busno, bh.hose_b->last_busno);
-
-	/* Turn on PCI retries */
-	val32 = mv64x60_read(&bh, MV64x60_CPU_CONFIG);
-	val32 &= ~(1 << 17);
-	mv64x60_write(&bh, MV64x60_CPU_CONFIG, val32);
-
-	/* Setup interrupts */
-	ppc7d_intr_setup();
-}
-
-static void __init ppc7d_setup_bridge(void)
-{
-	struct mv64x60_setup_info si;
-	int i;
-	u32 temp;
-
-	mv64360_irq_base = 16;	/* first 16 intrs are 2 x 8259's */
-
-	memset(&si, 0, sizeof(si));
-
-	si.phys_reg_base = CONFIG_MV64X60_NEW_BASE;
-
-	si.pci_0.enable_bus = 1;
-	si.pci_0.pci_io.cpu_base = PPC7D_PCI0_IO_START_PROC_ADDR;
-	si.pci_0.pci_io.pci_base_hi = 0;
-	si.pci_0.pci_io.pci_base_lo = PPC7D_PCI0_IO_START_PCI_ADDR;
-	si.pci_0.pci_io.size = PPC7D_PCI0_IO_SIZE;
-	si.pci_0.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_mem[0].cpu_base = PPC7D_PCI0_MEM0_START_PROC_ADDR;
-	si.pci_0.pci_mem[0].pci_base_hi = PPC7D_PCI0_MEM0_START_PCI_HI_ADDR;
-	si.pci_0.pci_mem[0].pci_base_lo = PPC7D_PCI0_MEM0_START_PCI_LO_ADDR;
-	si.pci_0.pci_mem[0].size = PPC7D_PCI0_MEM0_SIZE;
-	si.pci_0.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_mem[1].cpu_base = PPC7D_PCI0_MEM1_START_PROC_ADDR;
-	si.pci_0.pci_mem[1].pci_base_hi = PPC7D_PCI0_MEM1_START_PCI_HI_ADDR;
-	si.pci_0.pci_mem[1].pci_base_lo = PPC7D_PCI0_MEM1_START_PCI_LO_ADDR;
-	si.pci_0.pci_mem[1].size = PPC7D_PCI0_MEM1_SIZE;
-	si.pci_0.pci_mem[1].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_0.pci_cmd_bits = 0;
-	si.pci_0.latency_timer = 0x80;
-
-	si.pci_1.enable_bus = 1;
-	si.pci_1.pci_io.cpu_base = PPC7D_PCI1_IO_START_PROC_ADDR;
-	si.pci_1.pci_io.pci_base_hi = 0;
-	si.pci_1.pci_io.pci_base_lo = PPC7D_PCI1_IO_START_PCI_ADDR;
-	si.pci_1.pci_io.size = PPC7D_PCI1_IO_SIZE;
-	si.pci_1.pci_io.swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[0].cpu_base = PPC7D_PCI1_MEM0_START_PROC_ADDR;
-	si.pci_1.pci_mem[0].pci_base_hi = PPC7D_PCI1_MEM0_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[0].pci_base_lo = PPC7D_PCI1_MEM0_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[0].size = PPC7D_PCI1_MEM0_SIZE;
-	si.pci_1.pci_mem[0].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_mem[1].cpu_base = PPC7D_PCI1_MEM1_START_PROC_ADDR;
-	si.pci_1.pci_mem[1].pci_base_hi = PPC7D_PCI1_MEM1_START_PCI_HI_ADDR;
-	si.pci_1.pci_mem[1].pci_base_lo = PPC7D_PCI1_MEM1_START_PCI_LO_ADDR;
-	si.pci_1.pci_mem[1].size = PPC7D_PCI1_MEM1_SIZE;
-	si.pci_1.pci_mem[1].swap = MV64x60_CPU2PCI_SWAP_NONE;
-	si.pci_1.pci_cmd_bits = 0;
-	si.pci_1.latency_timer = 0x80;
-
-	/* Don't clear the SRAM window since we use it for debug */
-	si.window_preserve_mask_32_lo = (1 << MV64x60_CPU2SRAM_WIN);
-
-	printk(KERN_INFO "PCI: MV64360 PCI#0 IO at %x, size %x\n",
-	       si.pci_0.pci_io.cpu_base, si.pci_0.pci_io.size);
-	printk(KERN_INFO "PCI: MV64360 PCI#1 IO at %x, size %x\n",
-	       si.pci_1.pci_io.cpu_base, si.pci_1.pci_io.size);
-
-	for (i = 0; i < MV64x60_CPU2MEM_WINDOWS; i++) {
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-		si.cpu_prot_options[i] = 0;
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
-
-		si.pci_0.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_NONE |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
-#else
-		si.cpu_prot_options[i] = 0;
-		/* All PPC7D hardware uses B0 or newer MV64360 silicon which
-		 * does not have snoop bugs.
-		 */
-		si.enet_options[i] = MV64360_ENET2MEM_SNOOP_WB;
-		si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_WB;
-		si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_WB;
-
-		si.pci_0.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
-
-		si.pci_1.acc_cntl_options[i] =
-		    MV64360_PCI_ACC_CNTL_SNOOP_WB |
-		    MV64360_PCI_ACC_CNTL_SWAP_NONE |
-		    MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
-		    MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
-#endif
-	}
-
-	/* Lookup PCI host bridges */
-	if (mv64x60_init(&bh, &si))
-		printk(KERN_ERR "MV64360 initialization failed.\n");
-
-	pr_debug("MV64360 regs @ %lx/%p\n", bh.p_base, bh.v_base);
-
-	/* Enable WB Cache coherency on SRAM */
-	temp = mv64x60_read(&bh, MV64360_SRAM_CONFIG);
-	pr_debug("SRAM_CONFIG: %x\n", temp);
-#if defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, temp & ~0x2);
-#else
-	mv64x60_write(&bh, MV64360_SRAM_CONFIG, temp | 0x2);
-#endif
-	/* If system operates with internal bus arbiter (CPU master
-	 * control bit8) clear AACK Delay bit [25] in CPU
-	 * configuration register.
-	 */
-	temp = mv64x60_read(&bh, MV64x60_CPU_MASTER_CNTL);
-	if (temp & (1 << 8)) {
-		temp = mv64x60_read(&bh, MV64x60_CPU_CONFIG);
-		mv64x60_write(&bh, MV64x60_CPU_CONFIG, (temp & ~(1 << 25)));
-	}
-
-	/* Data and address parity is enabled */
-	temp = mv64x60_read(&bh, MV64x60_CPU_CONFIG);
-	mv64x60_write(&bh, MV64x60_CPU_CONFIG,
-		      (temp | (1 << 26) | (1 << 19)));
-
-	pci_dram_offset = 0;	/* sys mem at same addr on PCI & cpu bus */
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ppc7d_map_irq;
-	ppc_md.pci_exclude_device = ppc7d_pci_exclude_device;
-
-	mv64x60_set_bus(&bh, 0, 0);
-	bh.hose_a->first_busno = 0;
-	bh.hose_a->last_busno = 0xff;
-	bh.hose_a->mem_space.start = PPC7D_PCI0_MEM0_START_PCI_LO_ADDR;
-	bh.hose_a->mem_space.end =
-	    PPC7D_PCI0_MEM0_START_PCI_LO_ADDR + PPC7D_PCI0_MEM0_SIZE;
-
-	/* These will be set later, as a result of PCI0 scan */
-	bh.hose_b->first_busno = 0;
-	bh.hose_b->last_busno = 0xff;
-	bh.hose_b->mem_space.start = PPC7D_PCI1_MEM0_START_PCI_LO_ADDR;
-	bh.hose_b->mem_space.end =
-	    PPC7D_PCI1_MEM0_START_PCI_LO_ADDR + PPC7D_PCI1_MEM0_SIZE;
-
-	pr_debug("MV64360: PCI#0 IO decode %08x/%08x IO remap %08x\n",
-		 mv64x60_read(&bh, 0x48), mv64x60_read(&bh, 0x50),
-		 mv64x60_read(&bh, 0xf0));
-}
-
-static void __init ppc7d_setup_arch(void)
-{
-	int port;
-
-	loops_per_jiffy = 100000000 / HZ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	if ((cur_cpu_spec->cpu_features & CPU_FTR_SPEC7450) ||
-	    (cur_cpu_spec->cpu_features & CPU_FTR_L3CR))
-		/* 745x is different.  We only want to pass along enable. */
-		_set_L2CR(L2CR_L2E);
-	else if (cur_cpu_spec->cpu_features & CPU_FTR_L2CR)
-		/* All modules have 1MB of L2.  We also assume that an
-		 * L2 divisor of 3 will work.
-		 */
-		_set_L2CR(L2CR_L2E | L2CR_L2SIZ_1MB | L2CR_L2CLK_DIV3
-			  | L2CR_L2RAM_PIPE | L2CR_L2OH_1_0 | L2CR_L2DF);
-
-	if (cur_cpu_spec->cpu_features & CPU_FTR_L3CR)
-		/* No L3 cache */
-		_set_L3CR(0);
-
-#ifdef CONFIG_DUMMY_CONSOLE
-	conswitchp = &dummy_con;
-#endif
-
-	/* Lookup PCI host bridges */
-	if (ppc_md.progress)
-		ppc_md.progress("ppc7d_setup_arch: calling setup_bridge", 0);
-
-	ppc7d_setup_bridge();
-	ppc7d_setup_peripherals();
-
-	/* Disable ethernet. It might have been setup by the bootrom */
-	for (port = 0; port < 3; port++)
-		mv64x60_write(&bh, MV643XX_ETH_RECEIVE_QUEUE_COMMAND_REG(port),
-			      0x0000ff00);
-
-	/* Clear queue pointers to ensure they are all initialized,
-	 * otherwise since queues 1-7 are unused, they have random
-	 * pointers which look strange in register dumps. Don't bother
-	 * with queue 0 since it will be initialized later.
-	 */
-	for (port = 0; port < 3; port++) {
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_1(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_2(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_3(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_4(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_5(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_6(port),
-			      0x00000000);
-		mv64x60_write(&bh,
-			      MV643XX_ETH_RX_CURRENT_QUEUE_DESC_PTR_7(port),
-			      0x00000000);
-	}
-
-	printk(KERN_INFO "Radstone Technology PPC7D\n");
-	if (ppc_md.progress)
-		ppc_md.progress("ppc7d_setup_arch: exit", 0);
-
-}
-
-/* Real Time Clock support.
- * PPC7D has a DS1337 accessed by I2C.
- */
-static ulong ppc7d_get_rtc_time(void)
-{
-        struct rtc_time tm;
-        int result;
-
-        spin_lock(&rtc_lock);
-        result = ds1337_do_command(0, DS1337_GET_DATE, &tm);
-        spin_unlock(&rtc_lock);
-
-        if (result == 0)
-                result = mktime(tm.tm_year, tm.tm_mon, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec);
-
-        return result;
-}
-
-static int ppc7d_set_rtc_time(unsigned long nowtime)
-{
-        struct rtc_time tm;
-        int result;
-
-        spin_lock(&rtc_lock);
-        to_tm(nowtime, &tm);
-        result = ds1337_do_command(0, DS1337_SET_DATE, &tm);
-        spin_unlock(&rtc_lock);
-
-        return result;
-}
-
-/* This kernel command line parameter can be used to have the target
- * wait for a JTAG debugger to attach. Of course, a JTAG debugger
- * with hardware breakpoint support can have the target stop at any
- * location during init, but this is a convenience feature that makes
- * it easier in the common case of loading the code using the ppcboot
- * bootloader..
- */
-static unsigned long ppc7d_wait_debugger;
-
-static int __init ppc7d_waitdbg(char *str)
-{
-	ppc7d_wait_debugger = 1;
-	return 1;
-}
-
-__setup("waitdbg", ppc7d_waitdbg);
-
-/* Second phase board init, called after other (architecture common)
- * low-level services have been initialized.
- */
-static void ppc7d_init2(void)
-{
-	unsigned long flags;
-	u32 data;
-	u8 data8;
-
-	pr_debug("%s: enter\n", __func__);
-
-	/* Wait for debugger? */
-	if (ppc7d_wait_debugger) {
-		printk("Waiting for debugger...\n");
-
-		while (readl(&ppc7d_wait_debugger)) ;
-	}
-
-	/* Hook up i8259 interrupt which is connected to GPP28 */
-	request_irq(mv64360_irq_base + MV64x60_IRQ_GPP28, ppc7d_i8259_intr,
-		    IRQF_DISABLED, "I8259 (GPP28) interrupt", (void *)0);
-
-	/* Configure MPP16 as watchdog NMI, MPP17 as watchdog WDE */
-	spin_lock_irqsave(&mv64x60_lock, flags);
-	data = mv64x60_read(&bh, MV64x60_MPP_CNTL_2);
-	data &= ~(0x0000000f << 0);
-	data |= (0x00000004 << 0);
-	data &= ~(0x0000000f << 4);
-	data |= (0x00000004 << 4);
-	mv64x60_write(&bh, MV64x60_MPP_CNTL_2, data);
-	spin_unlock_irqrestore(&mv64x60_lock, flags);
-
-	/* All LEDs off */
-	data8 = inb(PPC7D_CPLD_LEDS);
-	data8 &= ~0x08;
-	data8 |= 0x07;
-	outb(data8, PPC7D_CPLD_LEDS);
-
-        /* Hook up RTC. We couldn't do this earlier because we need the I2C subsystem */
-        ppc_md.set_rtc_time = ppc7d_set_rtc_time;
-        ppc_md.get_rtc_time = ppc7d_get_rtc_time;
-
-	pr_debug("%s: exit\n", __func__);
-}
-
-/* Called from machine_init(), early, before any of the __init functions
- * have run. We must init software-configurable pins before other functions
- * such as interrupt controllers are initialised.
- */
-void __init platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-			  unsigned long r6, unsigned long r7)
-{
-	u8 val8;
-	u8 rev_num;
-
-	/* Map 0xe0000000-0xffffffff early because we need access to SRAM
-	 * and the ISA memory space (for serial port) here. This mapping
-	 * is redone properly in ppc7d_map_io() later.
-	 */
-	mtspr(SPRN_DBAT3U, 0xe0003fff);
-	mtspr(SPRN_DBAT3L, 0xe000002a);
-
-	/*
-	 * Zero SRAM. Note that this generates parity errors on
-	 * internal data path in SRAM if it's first time accessing it
-	 * after reset.
-	 *
-	 * We do this ASAP to avoid parity errors when reading
-	 * uninitialized SRAM.
-	 */
-	memset((void *)PPC7D_INTERNAL_SRAM_BASE, 0, MV64360_SRAM_SIZE);
-
-	pr_debug("platform_init: r3-r7: %lx %lx %lx %lx %lx\n",
-		 r3, r4, r5, r6, r7);
-
-	parse_bootinfo(find_bootinfo());
-
-	/* ASSUMPTION:  If both r3 (bd_t pointer) and r6 (cmdline pointer)
-	 * are non-zero, then we should use the board info from the bd_t
-	 * structure and the cmdline pointed to by r6 instead of the
-	 * information from birecs, if any.  Otherwise, use the information
-	 * from birecs as discovered by the preceding call to
-	 * parse_bootinfo().  This rule should work with both PPCBoot, which
-	 * uses a bd_t board info structure, and the kernel boot wrapper,
-	 * which uses birecs.
-	 */
-	if (r3 && r6) {
-		bd_t *bp = (bd_t *) __res;
-
-		/* copy board info structure */
-		memcpy((void *)__res, (void *)(r3 + KERNELBASE), sizeof(bd_t));
-		/* copy command line */
-		*(char *)(r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6 + KERNELBASE));
-
-		printk(KERN_INFO "Board info data:-\n");
-		printk(KERN_INFO "  Internal freq: %lu MHz, bus freq: %lu MHz\n",
-		       bp->bi_intfreq, bp->bi_busfreq);
-		printk(KERN_INFO "  Memory: %lx, size %lx\n", bp->bi_memstart,
-		       bp->bi_memsize);
-		printk(KERN_INFO "  Console baudrate: %lu\n", bp->bi_baudrate);
-		printk(KERN_INFO "  Ethernet address: "
-		       "%02x:%02x:%02x:%02x:%02x:%02x\n",
-		       bp->bi_enetaddr[0], bp->bi_enetaddr[1],
-		       bp->bi_enetaddr[2], bp->bi_enetaddr[3],
-		       bp->bi_enetaddr[4], bp->bi_enetaddr[5]);
-	}
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-		printk(KERN_INFO "INITRD @ %lx/%lx\n", initrd_start, initrd_end);
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	/* Map in board regs, etc. */
-	isa_io_base = 0xe8000000;
-	isa_mem_base = 0xe8000000;
-	pci_dram_offset = 0x00000000;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-
-	ppc_md.setup_arch = ppc7d_setup_arch;
-	ppc_md.init = ppc7d_init2;
-	ppc_md.show_cpuinfo = ppc7d_show_cpuinfo;
-	/* XXX this is broken... */
-	ppc_md.irq_canonicalize = ppc7d_irq_canonicalize;
-	ppc_md.init_IRQ = ppc7d_init_irq;
-	ppc_md.get_irq = ppc7d_get_irq;
-
-	ppc_md.restart = ppc7d_restart;
-	ppc_md.power_off = ppc7d_power_off;
-	ppc_md.halt = ppc7d_halt;
-
-	ppc_md.find_end_of_memory = ppc7d_find_end_of_memory;
-	ppc_md.setup_io_mappings = ppc7d_map_io;
-
-	ppc_md.time_init = NULL;
-	ppc_md.set_rtc_time = NULL;
-	ppc_md.get_rtc_time = NULL;
-	ppc_md.calibrate_decr = ppc7d_calibrate_decr;
-	ppc_md.nvram_read_val = NULL;
-	ppc_md.nvram_write_val = NULL;
-
-	ppc_md.heartbeat = ppc7d_heartbeat;
-	ppc_md.heartbeat_reset = HZ;
-	ppc_md.heartbeat_count = ppc_md.heartbeat_reset;
-
-	ppc_md.pcibios_fixup_bus = ppc7d_pci_fixup_bus;
-
-#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH) || \
-    defined(CONFIG_I2C_MV64XXX)
-	platform_notify = ppc7d_platform_notify;
-#endif
-
-#ifdef CONFIG_SERIAL_MPSC
-	/* On PPC7D, we must configure MPSC support via CPLD control
-	 * registers.
-	 */
-	outb(PPC7D_CPLD_RTS_COM4_SCLK |
-	     PPC7D_CPLD_RTS_COM56_ENABLED, PPC7D_CPLD_RTS);
-	outb(PPC7D_CPLD_COMS_COM3_TCLKEN |
-	     PPC7D_CPLD_COMS_COM3_TXEN |
-	     PPC7D_CPLD_COMS_COM4_TCLKEN |
-	     PPC7D_CPLD_COMS_COM4_TXEN, PPC7D_CPLD_COMS);
-#endif /* CONFIG_SERIAL_MPSC */
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG)
-	ppc7d_early_serial_map();
-#ifdef  CONFIG_SERIAL_TEXT_DEBUG
-#if defined(CONFIG_SERIAL_MPSC_CONSOLE)
-	ppc_md.progress = mv64x60_mpsc_progress;
-#elif defined(CONFIG_SERIAL_8250)
-	ppc_md.progress = gen550_progress;
-#else
-#error CONFIG_KGDB || CONFIG_SERIAL_TEXT_DEBUG has no supported CONFIG_SERIAL_XXX
-#endif /* CONFIG_SERIAL_8250 */
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
-#endif /* CONFIG_KGDB || CONFIG_SERIAL_TEXT_DEBUG */
-
-	/* Enable write access to user flash.  This is necessary for
-	 * flash probe.
-	 */
-	val8 = readb((void *)isa_io_base + PPC7D_CPLD_SW_FLASH_WRITE_PROTECT);
-	writeb(val8 | (PPC7D_CPLD_SW_FLASH_WRPROT_ENABLED &
-		       PPC7D_CPLD_SW_FLASH_WRPROT_USER_MASK),
-	       (void *)isa_io_base + PPC7D_CPLD_SW_FLASH_WRITE_PROTECT);
-
-	/* Determine if this board has IBM ALMA VME devices */
-	val8 = readb((void *)isa_io_base + PPC7D_CPLD_BOARD_REVISION);
-	rev_num = (val8 & PPC7D_CPLD_BOARD_REVISION_NUMBER_MASK) >> 5;
-	if (rev_num <= 1)
-		ppc7d_has_alma = 1;
-
-#ifdef DEBUG
-	console_printk[0] = 8;
-#endif
-}
diff --git a/arch/ppc/platforms/radstone_ppc7d.h b/arch/ppc/platforms/radstone_ppc7d.h
deleted file mode 100644
index 2bb093a0c03e..000000000000
--- a/arch/ppc/platforms/radstone_ppc7d.h
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- * Board definitions for the Radstone PPC7D boards.
- *
- * Author: James Chapman <jchapman@katalix.com>
- *
- * Based on code done by Rabeeh Khoury - rabeeh@galileo.co.il
- * Based on code done by - Mark A. Greer <mgreer@mvista.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/*
- * The MV64360 has 2 PCI buses each with 1 window from the CPU bus to
- * PCI I/O space and 4 windows from the CPU bus to PCI MEM space.
- * We'll only use one PCI MEM window on each PCI bus.
- *
- * This is the CPU physical memory map (windows must be at least 1MB
- * and start on a boundary that is a multiple of the window size):
- *
- *    0xff800000-0xffffffff      - Boot window
- *    0xff000000-0xff000fff	 - AFIX registers (DevCS2)
- *    0xfef00000-0xfef0ffff      - Internal MV64x60 registers
- *    0xfef40000-0xfef7ffff      - Internal SRAM
- *    0xfef00000-0xfef0ffff      - MV64360 Registers
- *    0x70000000-0x7fffffff      - soldered flash (DevCS3)
- *    0xe8000000-0xe9ffffff      - PCI I/O
- *    0x80000000-0xbfffffff      - PCI MEM
- */
-
-#ifndef __PPC_PLATFORMS_PPC7D_H
-#define __PPC_PLATFORMS_PPC7D_H
-
-#include <asm/ppcboot.h>
-
-/*****************************************************************************
- * CPU Physical Memory Map setup.
- *****************************************************************************/
-
-#define PPC7D_BOOT_WINDOW_BASE			0xff800000
-#define PPC7D_AFIX_REG_BASE			0xff000000
-#define PPC7D_INTERNAL_SRAM_BASE		0xfef40000
-#define PPC7D_FLASH_BASE			0x70000000
-
-#define PPC7D_BOOT_WINDOW_SIZE_ACTUAL		0x00800000 /* 8MB */
-#define PPC7D_FLASH_SIZE_ACTUAL			0x10000000 /* 256MB */
-
-#define PPC7D_BOOT_WINDOW_SIZE		max(MV64360_WINDOW_SIZE_MIN,	\
-		PPC7D_BOOT_WINDOW_SIZE_ACTUAL)
-#define PPC7D_FLASH_SIZE		max(MV64360_WINDOW_SIZE_MIN,	\
-		PPC7D_FLASH_SIZE_ACTUAL)
-#define PPC7D_AFIX_REG_SIZE		max(MV64360_WINDOW_SIZE_MIN, 0xff)
-
-
-#define PPC7D_PCI0_MEM0_START_PROC_ADDR        0x80000000UL
-#define PPC7D_PCI0_MEM0_START_PCI_HI_ADDR      0x00000000UL
-#define PPC7D_PCI0_MEM0_START_PCI_LO_ADDR      0x80000000UL
-#define PPC7D_PCI0_MEM0_SIZE                   0x20000000UL
-#define PPC7D_PCI0_MEM1_START_PROC_ADDR        0xe8010000UL
-#define PPC7D_PCI0_MEM1_START_PCI_HI_ADDR      0x00000000UL
-#define PPC7D_PCI0_MEM1_START_PCI_LO_ADDR      0x00000000UL
-#define PPC7D_PCI0_MEM1_SIZE                   0x000f0000UL
-#define PPC7D_PCI0_IO_START_PROC_ADDR          0xe8000000UL
-#define PPC7D_PCI0_IO_START_PCI_ADDR           0x00000000UL
-#define PPC7D_PCI0_IO_SIZE                     0x00010000UL
-
-#define PPC7D_PCI1_MEM0_START_PROC_ADDR        0xa0000000UL
-#define PPC7D_PCI1_MEM0_START_PCI_HI_ADDR      0x00000000UL
-#define PPC7D_PCI1_MEM0_START_PCI_LO_ADDR      0xa0000000UL
-#define PPC7D_PCI1_MEM0_SIZE                   0x20000000UL
-#define PPC7D_PCI1_MEM1_START_PROC_ADDR        0xe9800000UL
-#define PPC7D_PCI1_MEM1_START_PCI_HI_ADDR      0x00000000UL
-#define PPC7D_PCI1_MEM1_START_PCI_LO_ADDR      0x00000000UL
-#define PPC7D_PCI1_MEM1_SIZE                   0x00800000UL
-#define PPC7D_PCI1_IO_START_PROC_ADDR          0xe9000000UL
-#define PPC7D_PCI1_IO_START_PCI_ADDR           0x00000000UL
-#define PPC7D_PCI1_IO_SIZE                     0x00010000UL
-
-#define	PPC7D_DEFAULT_BAUD			9600
-#define	PPC7D_MPSC_CLK_SRC			8	  /* TCLK */
-#define	PPC7D_MPSC_CLK_FREQ			133333333 /* 133.3333... MHz */
-
-#define	PPC7D_ETH0_PHY_ADDR			8
-#define	PPC7D_ETH1_PHY_ADDR			9
-#define	PPC7D_ETH2_PHY_ADDR			0
-
-#define PPC7D_ETH_TX_QUEUE_SIZE			400
-#define PPC7D_ETH_RX_QUEUE_SIZE			400
-
-#define	PPC7D_ETH_PORT_CONFIG_VALUE			\
-	MV64340_ETH_UNICAST_NORMAL_MODE			|	\
-	MV64340_ETH_DEFAULT_RX_QUEUE_0			|	\
-	MV64340_ETH_DEFAULT_RX_ARP_QUEUE_0		|	\
-	MV64340_ETH_RECEIVE_BC_IF_NOT_IP_OR_ARP		|	\
-	MV64340_ETH_RECEIVE_BC_IF_IP			|	\
-	MV64340_ETH_RECEIVE_BC_IF_ARP			|	\
-	MV64340_ETH_CAPTURE_TCP_FRAMES_DIS		|	\
-	MV64340_ETH_CAPTURE_UDP_FRAMES_DIS		|	\
-	MV64340_ETH_DEFAULT_RX_TCP_QUEUE_0		|	\
-	MV64340_ETH_DEFAULT_RX_UDP_QUEUE_0		|	\
-	MV64340_ETH_DEFAULT_RX_BPDU_QUEUE_0
-
-#define	PPC7D_ETH_PORT_CONFIG_EXTEND_VALUE		\
-	MV64340_ETH_SPAN_BPDU_PACKETS_AS_NORMAL		|	\
-	MV64340_ETH_PARTITION_DISABLE
-
-#define	GT_ETH_IPG_INT_RX(value)			\
-	((value & 0x3fff) << 8)
-
-#define	PPC7D_ETH_PORT_SDMA_CONFIG_VALUE		\
-	MV64340_ETH_RX_BURST_SIZE_4_64BIT		|	\
-	GT_ETH_IPG_INT_RX(0)			|	\
-	MV64340_ETH_TX_BURST_SIZE_4_64BIT
-
-#define	PPC7D_ETH_PORT_SERIAL_CONTROL_VALUE		\
-	MV64340_ETH_ENABLE_AUTO_NEG_FOR_DUPLX		|	\
-	MV64340_ETH_DISABLE_AUTO_NEG_FOR_FLOW_CTRL	|	\
-	MV64340_ETH_ADV_SYMMETRIC_FLOW_CTRL		|	\
-	MV64340_ETH_FORCE_FC_MODE_NO_PAUSE_DIS_TX	|	\
-	MV64340_ETH_FORCE_BP_MODE_NO_JAM		|	\
-	(1 << 9)					|	\
-	MV64340_ETH_DO_NOT_FORCE_LINK_FAIL		|	\
-	MV64340_ETH_RETRANSMIT_16_ATTEMPTS		|	\
-	MV64340_ETH_ENABLE_AUTO_NEG_SPEED_GMII		|	\
-	MV64340_ETH_DTE_ADV_0				|	\
-	MV64340_ETH_DISABLE_AUTO_NEG_BYPASS		|	\
-	MV64340_ETH_AUTO_NEG_NO_CHANGE			|	\
-	MV64340_ETH_MAX_RX_PACKET_9700BYTE		|	\
-	MV64340_ETH_CLR_EXT_LOOPBACK			|	\
-	MV64340_ETH_SET_FULL_DUPLEX_MODE		|	\
-	MV64340_ETH_ENABLE_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX
-
-/*****************************************************************************
- * Serial defines.
- *****************************************************************************/
-
-#define PPC7D_SERIAL_0		0xe80003f8
-#define PPC7D_SERIAL_1		0xe80002f8
-
-#define RS_TABLE_SIZE  2
-
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define UART_CLK			1843200
-#define BASE_BAUD			( UART_CLK / 16 )
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF)
-#endif
-
-#define STD_SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, PPC7D_SERIAL_0, 4, STD_COM_FLAGS, /* ttyS0 */ \
-		iomem_base: (u8 *)PPC7D_SERIAL_0,			  \
-		io_type: SERIAL_IO_MEM, },				  \
-        { 0, BASE_BAUD, PPC7D_SERIAL_1, 3, STD_COM_FLAGS, /* ttyS1 */ \
-		iomem_base: (u8 *)PPC7D_SERIAL_1,			  \
-		io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-
-/*****************************************************************************
- * CPLD defines.
- *
- * Register map:-
- *
- * 0000 to 000F 	South Bridge DMA 1 Control
- * 0020 and 0021 	South Bridge Interrupt 1 Control
- * 0040 to 0043 	South Bridge Counter Control
- * 0060 		Keyboard
- * 0061 		South Bridge NMI Status and Control
- * 0064 		Keyboard
- * 0071 and 0072 	RTC R/W
- * 0078 to 007B 	South Bridge BIOS Timer
- * 0080 to 0090 	South Bridge DMA Pages
- * 00A0 and 00A1 	South Bridge Interrupt 2 Control
- * 00C0 to 00DE 	South Bridge DMA 2 Control
- * 02E8 to 02EF 	COM6 R/W
- * 02F8 to 02FF 	South Bridge COM2 R/W
- * 03E8 to 03EF 	COM5 R/W
- * 03F8 to 03FF 	South Bridge COM1 R/W
- * 040A 		South Bridge DMA Scatter/Gather RO
- * 040B 		DMA 1 Extended Mode WO
- * 0410 to 043F 	South Bridge DMA Scatter/Gather
- * 0481 to 048B 	South Bridge DMA High Pages
- * 04D0 and 04D1 	South Bridge Edge/Level Control
- * 04D6 		DMA 2 Extended Mode WO
- * 0804 		Memory Configuration RO
- * 0806 		Memory Configuration Extend RO
- * 0808 		SCSI Activity LED R/W
- * 080C 		Equipment Present 1 RO
- * 080E 		Equipment Present 2 RO
- * 0810 		Equipment Present 3 RO
- * 0812 		Equipment Present 4 RO
- * 0818 		Key Lock RO
- * 0820 		LEDS R/W
- * 0824 		COMs R/W
- * 0826 		RTS R/W
- * 0828 		Reset R/W
- * 082C 		Watchdog Trig R/W
- * 082E 		Interrupt R/W
- * 0830 		Interrupt Status RO
- * 0832 		PCI configuration RO
- * 0854 		Board Revision RO
- * 0858 		Extended ID RO
- * 0864 		ID Link RO
- * 0866 		Motherboard Type RO
- * 0868 		FLASH Write control RO
- * 086A 		Software FLASH write protect R/W
- * 086E 		FLASH Control R/W
- *****************************************************************************/
-
-#define PPC7D_CPLD_MEM_CONFIG			0x0804
-#define PPC7D_CPLD_MEM_CONFIG_EXTEND		0x0806
-#define PPC7D_CPLD_SCSI_ACTIVITY_LED		0x0808
-#define PPC7D_CPLD_EQUIPMENT_PRESENT_1		0x080C
-#define PPC7D_CPLD_EQUIPMENT_PRESENT_2		0x080E
-#define PPC7D_CPLD_EQUIPMENT_PRESENT_3		0x0810
-#define PPC7D_CPLD_EQUIPMENT_PRESENT_4		0x0812
-#define PPC7D_CPLD_KEY_LOCK			0x0818
-#define PPC7D_CPLD_LEDS				0x0820
-#define PPC7D_CPLD_COMS				0x0824
-#define PPC7D_CPLD_RTS				0x0826
-#define PPC7D_CPLD_RESET			0x0828
-#define PPC7D_CPLD_WATCHDOG_TRIG		0x082C
-#define PPC7D_CPLD_INTR				0x082E
-#define PPC7D_CPLD_INTR_STATUS			0x0830
-#define PPC7D_CPLD_PCI_CONFIG			0x0832
-#define PPC7D_CPLD_BOARD_REVISION		0x0854
-#define PPC7D_CPLD_EXTENDED_ID			0x0858
-#define PPC7D_CPLD_ID_LINK			0x0864
-#define PPC7D_CPLD_MOTHERBOARD_TYPE		0x0866
-#define PPC7D_CPLD_FLASH_WRITE_CNTL		0x0868
-#define PPC7D_CPLD_SW_FLASH_WRITE_PROTECT	0x086A
-#define PPC7D_CPLD_FLASH_CNTL			0x086E
-
-/* MEMORY_CONFIG_EXTEND */
-#define PPC7D_CPLD_SDRAM_BANK_NUM_MASK		0x02
-#define PPC7D_CPLD_SDRAM_BANK_SIZE_MASK		0xc0
-#define PPC7D_CPLD_SDRAM_BANK_SIZE_128M		0
-#define PPC7D_CPLD_SDRAM_BANK_SIZE_256M		0x40
-#define PPC7D_CPLD_SDRAM_BANK_SIZE_512M		0x80
-#define PPC7D_CPLD_SDRAM_BANK_SIZE_1G		0xc0
-#define PPC7D_CPLD_FLASH_DEV_SIZE_MASK		0x03
-#define PPC7D_CPLD_FLASH_BANK_NUM_MASK		0x0c
-#define PPC7D_CPLD_FLASH_DEV_SIZE_64M		0
-#define PPC7D_CPLD_FLASH_DEV_SIZE_32M		1
-#define PPC7D_CPLD_FLASH_DEV_SIZE_16M		3
-#define PPC7D_CPLD_FLASH_BANK_NUM_4		0x00
-#define PPC7D_CPLD_FLASH_BANK_NUM_3		0x04
-#define PPC7D_CPLD_FLASH_BANK_NUM_2		0x08
-#define PPC7D_CPLD_FLASH_BANK_NUM_1		0x0c
-
-/* SCSI_LED */
-#define PPC7D_CPLD_SCSI_ACTIVITY_LED_OFF	0
-#define PPC7D_CPLD_SCSI_ACTIVITY_LED_ON		1
-
-/* EQUIPMENT_PRESENT_1 */
-#define PPC7D_CPLD_EQPT_PRES_1_FITTED		0
-#define PPC7D_CPLD_EQPT_PRES_1_PMC2_MASK	(0x80 >> 2)
-#define PPC7D_CPLD_EQPT_PRES_1_PMC1_MASK	(0x80 >> 3)
-#define PPC7D_CPLD_EQPT_PRES_1_AFIX_MASK	(0x80 >> 4)
-
-/* EQUIPMENT_PRESENT_2 */
-#define PPC7D_CPLD_EQPT_PRES_2_FITTED		!0
-#define PPC7D_CPLD_EQPT_PRES_2_UNIVERSE_MASK	(0x80 >> 0)
-#define PPC7D_CPLD_EQPT_PRES_2_COM36_MASK	(0x80 >> 2)
-#define PPC7D_CPLD_EQPT_PRES_2_GIGE_MASK	(0x80 >> 3)
-#define PPC7D_CPLD_EQPT_PRES_2_DUALGIGE_MASK	(0x80 >> 4)
-
-/* EQUIPMENT_PRESENT_3 */
-#define PPC7D_CPLD_EQPT_PRES_3_PMC2_V_MASK	(0x80 >> 3)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC2_5V		(0 >> 3)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC2_3V		(0x80 >> 3)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC1_V_MASK	(0x80 >> 4)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC1_5V		(0 >> 4)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC1_3V		(0x80 >> 4)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC_POWER_MASK	(0x80 >> 5)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC_POWER_INTER	(0 >> 5)
-#define PPC7D_CPLD_EQPT_PRES_3_PMC_POWER_VME	(0x80 >> 5)
-
-/* EQUIPMENT_PRESENT_4 */
-#define PPC7D_CPLD_EQPT_PRES_4_LPT_MASK		(0x80 >> 2)
-#define PPC7D_CPLD_EQPT_PRES_4_LPT_FITTED	(0x80 >> 2)
-#define PPC7D_CPLD_EQPT_PRES_4_PS2_USB2_MASK	(0xc0 >> 6)
-#define PPC7D_CPLD_EQPT_PRES_4_PS2_FITTED	(0x40 >> 6)
-#define PPC7D_CPLD_EQPT_PRES_4_USB2_FITTED	(0x80 >> 6)
-
-/* CPLD_LEDS */
-#define PPC7D_CPLD_LEDS_ON			(!0)
-#define PPC7D_CPLD_LEDS_OFF			(0)
-#define PPC7D_CPLD_LEDS_NVRAM_PAGE_MASK		(0xc0 >> 2)
-#define PPC7D_CPLD_LEDS_DS201_MASK		(0x80 >> 4)
-#define PPC7D_CPLD_LEDS_DS219_MASK		(0x80 >> 5)
-#define PPC7D_CPLD_LEDS_DS220_MASK		(0x80 >> 6)
-#define PPC7D_CPLD_LEDS_DS221_MASK		(0x80 >> 7)
-
-/* CPLD_COMS */
-#define PPC7D_CPLD_COMS_COM3_TCLKEN		(0x80 >> 0)
-#define PPC7D_CPLD_COMS_COM3_RTCLKEN		(0x80 >> 1)
-#define PPC7D_CPLD_COMS_COM3_MODE_MASK		(0x80 >> 2)
-#define PPC7D_CPLD_COMS_COM3_MODE_RS232		(0)
-#define PPC7D_CPLD_COMS_COM3_MODE_RS422		(0x80 >> 2)
-#define PPC7D_CPLD_COMS_COM3_TXEN		(0x80 >> 3)
-#define PPC7D_CPLD_COMS_COM4_TCLKEN		(0x80 >> 4)
-#define PPC7D_CPLD_COMS_COM4_RTCLKEN		(0x80 >> 5)
-#define PPC7D_CPLD_COMS_COM4_MODE_MASK		(0x80 >> 6)
-#define PPC7D_CPLD_COMS_COM4_MODE_RS232		(0)
-#define PPC7D_CPLD_COMS_COM4_MODE_RS422		(0x80 >> 6)
-#define PPC7D_CPLD_COMS_COM4_TXEN		(0x80 >> 7)
-
-/* CPLD_RTS */
-#define PPC7D_CPLD_RTS_COM36_LOOPBACK		(0x80 >> 0)
-#define PPC7D_CPLD_RTS_COM4_SCLK		(0x80 >> 1)
-#define PPC7D_CPLD_RTS_COM3_TXFUNC_MASK		(0xc0 >> 2)
-#define PPC7D_CPLD_RTS_COM3_TXFUNC_DISABLED	(0 >> 2)
-#define PPC7D_CPLD_RTS_COM3_TXFUNC_ENABLED	(0x80 >> 2)
-#define PPC7D_CPLD_RTS_COM3_TXFUNC_ENABLED_RTG3	(0xc0 >> 2)
-#define PPC7D_CPLD_RTS_COM3_TXFUNC_ENABLED_RTG3S (0xc0 >> 2)
-#define PPC7D_CPLD_RTS_COM56_MODE_MASK		(0x80 >> 4)
-#define PPC7D_CPLD_RTS_COM56_MODE_RS232		(0)
-#define PPC7D_CPLD_RTS_COM56_MODE_RS422		(0x80 >> 4)
-#define PPC7D_CPLD_RTS_COM56_ENABLE_MASK	(0x80 >> 5)
-#define PPC7D_CPLD_RTS_COM56_DISABLED		(0)
-#define PPC7D_CPLD_RTS_COM56_ENABLED		(0x80 >> 5)
-#define PPC7D_CPLD_RTS_COM4_TXFUNC_MASK		(0xc0 >> 6)
-#define PPC7D_CPLD_RTS_COM4_TXFUNC_DISABLED	(0 >> 6)
-#define PPC7D_CPLD_RTS_COM4_TXFUNC_ENABLED	(0x80 >> 6)
-#define PPC7D_CPLD_RTS_COM4_TXFUNC_ENABLED_RTG3	(0x40 >> 6)
-#define PPC7D_CPLD_RTS_COM4_TXFUNC_ENABLED_RTG3S (0x40 >> 6)
-
-/* WATCHDOG_TRIG */
-#define PPC7D_CPLD_WDOG_CAUSE_MASK		(0x80 >> 0)
-#define PPC7D_CPLD_WDOG_CAUSE_NORMAL_RESET	(0 >> 0)
-#define PPC7D_CPLD_WDOG_CAUSE_WATCHDOG		(0x80 >> 0)
-#define PPC7D_CPLD_WDOG_ENABLE_MASK		(0x80 >> 6)
-#define PPC7D_CPLD_WDOG_ENABLE_OFF		(0 >> 6)
-#define PPC7D_CPLD_WDOG_ENABLE_ON		(0x80 >> 6)
-#define PPC7D_CPLD_WDOG_RESETSW_MASK		(0x80 >> 7)
-#define PPC7D_CPLD_WDOG_RESETSW_OFF		(0 >> 7)
-#define PPC7D_CPLD_WDOG_RESETSW_ON		(0x80 >> 7)
-
-/* Interrupt mask and status bits */
-#define PPC7D_CPLD_INTR_TEMP_MASK		(0x80 >> 0)
-#define PPC7D_CPLD_INTR_HB8_MASK		(0x80 >> 1)
-#define PPC7D_CPLD_INTR_PHY1_MASK		(0x80 >> 2)
-#define PPC7D_CPLD_INTR_PHY0_MASK		(0x80 >> 3)
-#define PPC7D_CPLD_INTR_ISANMI_MASK		(0x80 >> 5)
-#define PPC7D_CPLD_INTR_CRITTEMP_MASK		(0x80 >> 6)
-
-/* CPLD_INTR */
-#define PPC7D_CPLD_INTR_ENABLE_OFF		(0)
-#define PPC7D_CPLD_INTR_ENABLE_ON		(!0)
-
-/* CPLD_INTR_STATUS */
-#define PPC7D_CPLD_INTR_STATUS_OFF		(0)
-#define PPC7D_CPLD_INTR_STATUS_ON		(!0)
-
-/* CPLD_PCI_CONFIG */
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_MASK		0x70
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCI33	0x00
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCI66	0x10
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCIX33	0x40
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCIX66	0x50
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCIX100      0x60
-#define PPC7D_CPLD_PCI_CONFIG_PCI0_PCIX133	0x70
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_MASK		0x07
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCI33	0x00
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCI66	0x01
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCIX33	0x04
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCIX66	0x05
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCIX100	0x06
-#define PPC7D_CPLD_PCI_CONFIG_PCI1_PCIX133	0x07
-
-/* CPLD_BOARD_REVISION */
-#define PPC7D_CPLD_BOARD_REVISION_NUMBER_MASK	0xe0
-#define PPC7D_CPLD_BOARD_REVISION_LETTER_MASK	0x1f
-
-/* CPLD_EXTENDED_ID */
-#define PPC7D_CPLD_EXTENDED_ID_PPC7D		0x18
-
-/* CPLD_ID_LINK */
-#define PPC7D_CPLD_ID_LINK_VME64_GAP_MASK	(0x80 >> 2)
-#define PPC7D_CPLD_ID_LINK_VME64_GA4_MASK	(0x80 >> 3)
-#define PPC7D_CPLD_ID_LINK_E13_MASK		(0x80 >> 4)
-#define PPC7D_CPLD_ID_LINK_E12_MASK		(0x80 >> 5)
-#define PPC7D_CPLD_ID_LINK_E7_MASK		(0x80 >> 6)
-#define PPC7D_CPLD_ID_LINK_E6_MASK		(0x80 >> 7)
-
-/* CPLD_MOTHERBOARD_TYPE */
-#define PPC7D_CPLD_MB_TYPE_ECC_ENABLE_MASK	(0x80 >> 0)
-#define PPC7D_CPLD_MB_TYPE_ECC_ENABLED		(0x80 >> 0)
-#define PPC7D_CPLD_MB_TYPE_ECC_DISABLED		(0 >> 0)
-#define PPC7D_CPLD_MB_TYPE_ECC_FITTED_MASK	(0x80 >> 3)
-#define PPC7D_CPLD_MB_TYPE_PLL_MASK		0x0c
-#define PPC7D_CPLD_MB_TYPE_PLL_133		0x00
-#define PPC7D_CPLD_MB_TYPE_PLL_100		0x08
-#define PPC7D_CPLD_MB_TYPE_PLL_64		0x04
-#define PPC7D_CPLD_MB_TYPE_HW_ID_MASK		0x03
-
-/* CPLD_FLASH_WRITE_CNTL */
-#define PPD7D_CPLD_FLASH_CNTL_WR_LINK_MASK	(0x80 >> 0)
-#define PPD7D_CPLD_FLASH_CNTL_WR_LINK_FITTED	(0x80 >> 0)
-#define PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_MASK	(0x80 >> 2)
-#define PPD7D_CPLD_FLASH_CNTL_BOOT_LINK_FITTED	(0x80 >> 2)
-#define PPD7D_CPLD_FLASH_CNTL_USER_LINK_MASK	(0x80 >> 3)
-#define PPD7D_CPLD_FLASH_CNTL_USER_LINK_FITTED	(0x80 >> 3)
-#define PPD7D_CPLD_FLASH_CNTL_RECO_WR_MASK	(0x80 >> 5)
-#define PPD7D_CPLD_FLASH_CNTL_RECO_WR_ENABLED	(0x80 >> 5)
-#define PPD7D_CPLD_FLASH_CNTL_BOOT_WR_MASK	(0x80 >> 6)
-#define PPD7D_CPLD_FLASH_CNTL_BOOT_WR_ENABLED	(0x80 >> 6)
-#define PPD7D_CPLD_FLASH_CNTL_USER_WR_MASK	(0x80 >> 7)
-#define PPD7D_CPLD_FLASH_CNTL_USER_WR_ENABLED	(0x80 >> 7)
-
-/* CPLD_SW_FLASH_WRITE_PROTECT */
-#define PPC7D_CPLD_SW_FLASH_WRPROT_ENABLED	(!0)
-#define PPC7D_CPLD_SW_FLASH_WRPROT_DISABLED	(0)
-#define PPC7D_CPLD_SW_FLASH_WRPROT_SYSBOOT_MASK	(0x80 >> 6)
-#define PPC7D_CPLD_SW_FLASH_WRPROT_USER_MASK	(0x80 >> 7)
-
-/* CPLD_FLASH_WRITE_CNTL */
-#define PPC7D_CPLD_FLASH_CNTL_NVRAM_PROT_MASK	(0x80 >> 0)
-#define PPC7D_CPLD_FLASH_CNTL_NVRAM_DISABLED	(0 >> 0)
-#define PPC7D_CPLD_FLASH_CNTL_NVRAM_ENABLED	(0x80 >> 0)
-#define PPC7D_CPLD_FLASH_CNTL_ALTBOOT_LINK_MASK	(0x80 >> 1)
-#define PPC7D_CPLD_FLASH_CNTL_VMEBOOT_LINK_MASK	(0x80 >> 2)
-#define PPC7D_CPLD_FLASH_CNTL_RECBOOT_LINK_MASK	(0x80 >> 3)
-
-
-#endif /* __PPC_PLATFORMS_PPC7D_H */
diff --git a/arch/ppc/platforms/residual.c b/arch/ppc/platforms/residual.c
deleted file mode 100644
index d687b0f8763b..000000000000
--- a/arch/ppc/platforms/residual.c
+++ /dev/null
@@ -1,1034 +0,0 @@
-/*
- * Code to deal with the PReP residual data.
- *
- * Written by: Cort Dougan (cort@cs.nmt.edu)
- * Improved _greatly_ and rewritten by Gabriel Paubert (paubert@iram.es)
- *
- *  This file is based on the following documentation:
- *
- *	IBM Power Personal Systems Architecture
- *	Residual Data
- * 	Document Number: PPS-AR-FW0001
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- *
- */
-
-#include <linux/string.h>
-#include <asm/residual.h>
-#include <asm/pnp.h>
-#include <asm/byteorder.h>
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/tty.h>
-#include <linux/major.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/proc_fs.h>
-
-#include <asm/sections.h>
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/ide.h>
-
-
-unsigned char __res[sizeof(RESIDUAL)] = {0,};
-RESIDUAL *res = (RESIDUAL *)&__res;
-
-char * PnP_BASE_TYPES[] __initdata = {
-  "Reserved",
-  "MassStorageDevice",
-  "NetworkInterfaceController",
-  "DisplayController",
-  "MultimediaController",
-  "MemoryController",
-  "BridgeController",
-  "CommunicationsDevice",
-  "SystemPeripheral",
-  "InputDevice",
-  "ServiceProcessor"
-  };
-
-/* Device Sub Type Codes */
-
-unsigned char * PnP_SUB_TYPES[] __initdata = {
-  "\001\000SCSIController",
-  "\001\001IDEController",
-  "\001\002FloppyController",
-  "\001\003IPIController",
-  "\001\200OtherMassStorageController",
-  "\002\000EthernetController",
-  "\002\001TokenRingController",
-  "\002\002FDDIController",
-  "\002\0x80OtherNetworkController",
-  "\003\000VGAController",
-  "\003\001SVGAController",
-  "\003\002XGAController",
-  "\003\200OtherDisplayController",
-  "\004\000VideoController",
-  "\004\001AudioController",
-  "\004\200OtherMultimediaController",
-  "\005\000RAM",
-  "\005\001FLASH",
-  "\005\200OtherMemoryDevice",
-  "\006\000HostProcessorBridge",
-  "\006\001ISABridge",
-  "\006\002EISABridge",
-  "\006\003MicroChannelBridge",
-  "\006\004PCIBridge",
-  "\006\005PCMCIABridge",
-  "\006\006VMEBridge",
-  "\006\200OtherBridgeDevice",
-  "\007\000RS232Device",
-  "\007\001ATCompatibleParallelPort",
-  "\007\200OtherCommunicationsDevice",
-  "\010\000ProgrammableInterruptController",
-  "\010\001DMAController",
-  "\010\002SystemTimer",
-  "\010\003RealTimeClock",
-  "\010\004L2Cache",
-  "\010\005NVRAM",
-  "\010\006PowerManagement",
-  "\010\007CMOS",
-  "\010\010OperatorPanel",
-  "\010\011ServiceProcessorClass1",
-  "\010\012ServiceProcessorClass2",
-  "\010\013ServiceProcessorClass3",
-  "\010\014GraphicAssist",
-  "\010\017SystemPlanar",
-  "\010\200OtherSystemPeripheral",
-  "\011\000KeyboardController",
-  "\011\001Digitizer",
-  "\011\002MouseController",
-  "\011\003TabletController",
-  "\011\0x80OtherInputController",
-  "\012\000GeneralMemoryController",
-  NULL
-};
-
-/* Device Interface Type Codes */
-
-unsigned char * PnP_INTERFACES[] __initdata = {
-  "\000\000\000General",
-  "\001\000\000GeneralSCSI",
-  "\001\001\000GeneralIDE",
-  "\001\001\001ATACompatible",
-
-  "\001\002\000GeneralFloppy",
-  "\001\002\001Compatible765",
-  "\001\002\002NS398_Floppy",         /* NS Super I/O wired to use index
-                                         register at port 398 and data
-                                         register at port 399               */
-  "\001\002\003NS26E_Floppy",         /* Ports 26E and 26F                  */
-  "\001\002\004NS15C_Floppy",         /* Ports 15C and 15D                  */
-  "\001\002\005NS2E_Floppy",          /* Ports 2E and 2F                    */
-  "\001\002\006CHRP_Floppy",          /* CHRP Floppy in PR*P system         */
-
-  "\001\003\000GeneralIPI",
-
-  "\002\000\000GeneralEther",
-  "\002\001\000GeneralToken",
-  "\002\002\000GeneralFDDI",
-
-  "\003\000\000GeneralVGA",
-  "\003\001\000GeneralSVGA",
-  "\003\002\000GeneralXGA",
-
-  "\004\000\000GeneralVideo",
-  "\004\001\000GeneralAudio",
-  "\004\001\001CS4232Audio",            /* CS 4232 Plug 'n Play Configured    */
-
-  "\005\000\000GeneralRAM",
-  /* This one is obviously wrong ! */
-  "\005\000\000PCIMemoryController",    /* PCI Config Method                  */
-  "\005\000\001RS6KMemoryController",   /* RS6K Config Method                 */
-  "\005\001\000GeneralFLASH",
-
-  "\006\000\000GeneralHostBridge",
-  "\006\001\000GeneralISABridge",
-  "\006\002\000GeneralEISABridge",
-  "\006\003\000GeneralMCABridge",
-  /* GeneralPCIBridge = 0, */
-  "\006\004\000PCIBridgeDirect",
-  "\006\004\001PCIBridgeIndirect",
-  "\006\004\002PCIBridgeRS6K",
-  "\006\005\000GeneralPCMCIABridge",
-  "\006\006\000GeneralVMEBridge",
-
-  "\007\000\000GeneralRS232",
-  "\007\000\001COMx",
-  "\007\000\002Compatible16450",
-  "\007\000\003Compatible16550",
-  "\007\000\004NS398SerPort",         /* NS Super I/O wired to use index
-                                         register at port 398 and data
-                                         register at port 399               */
-  "\007\000\005NS26ESerPort",         /* Ports 26E and 26F                  */
-  "\007\000\006NS15CSerPort",         /* Ports 15C and 15D                  */
-  "\007\000\007NS2ESerPort",          /* Ports 2E and 2F                    */
-
-  "\007\001\000GeneralParPort",
-  "\007\001\001LPTx",
-  "\007\001\002NS398ParPort",         /* NS Super I/O wired to use index
-                                         register at port 398 and data
-                                         register at port 399               */
-  "\007\001\003NS26EParPort",         /* Ports 26E and 26F                  */
-  "\007\001\004NS15CParPort",         /* Ports 15C and 15D                  */
-  "\007\001\005NS2EParPort",          /* Ports 2E and 2F                    */
-
-  "\010\000\000GeneralPIC",
-  "\010\000\001ISA_PIC",
-  "\010\000\002EISA_PIC",
-  "\010\000\003MPIC",
-  "\010\000\004RS6K_PIC",
-
-  "\010\001\000GeneralDMA",
-  "\010\001\001ISA_DMA",
-  "\010\001\002EISA_DMA",
-
-  "\010\002\000GeneralTimer",
-  "\010\002\001ISA_Timer",
-  "\010\002\002EISA_Timer",
-  "\010\003\000GeneralRTC",
-  "\010\003\001ISA_RTC",
-
-  "\010\004\001StoreThruOnly",
-  "\010\004\002StoreInEnabled",
-  "\010\004\003RS6KL2Cache",
-
-  "\010\005\000IndirectNVRAM",        /* Indirectly addressed               */
-  "\010\005\001DirectNVRAM",          /* Memory Mapped                      */
-  "\010\005\002IndirectNVRAM24",      /* Indirectly addressed - 24 bit      */
-
-  "\010\006\000GeneralPowerManagement",
-  "\010\006\001EPOWPowerManagement",
-  "\010\006\002PowerControl",         // d1378
-
-  "\010\007\000GeneralCMOS",
-
-  "\010\010\000GeneralOPPanel",
-  "\010\010\001HarddiskLight",
-  "\010\010\002CDROMLight",
-  "\010\010\003PowerLight",
-  "\010\010\004KeyLock",
-  "\010\010\005ANDisplay",            /* AlphaNumeric Display               */
-  "\010\010\006SystemStatusLED",      /* 3 digit 7 segment LED              */
-  "\010\010\007CHRP_SystemStatusLED", /* CHRP LEDs in PR*P system           */
-
-  "\010\011\000GeneralServiceProcessor",
-  "\010\012\000GeneralServiceProcessor",
-  "\010\013\000GeneralServiceProcessor",
-
-  "\010\014\001TransferData",
-  "\010\014\002IGMC32",
-  "\010\014\003IGMC64",
-
-  "\010\017\000GeneralSystemPlanar",   /* 10/5/95                            */
-  NULL
-  };
-
-static const unsigned char __init *PnP_SUB_TYPE_STR(unsigned char BaseType,
-					     unsigned char SubType) {
-	unsigned char ** s=PnP_SUB_TYPES;
-	while (*s && !((*s)[0]==BaseType
-		       && (*s)[1]==SubType)) s++;
-	if (*s) return *s+2;
-	else return("Unknown !");
-};
-
-static const unsigned char __init *PnP_INTERFACE_STR(unsigned char BaseType,
-					      unsigned char SubType,
-					      unsigned char Interface) {
-	unsigned char ** s=PnP_INTERFACES;
-	while (*s && !((*s)[0]==BaseType
-		       && (*s)[1]==SubType
-		       && (*s)[2]==Interface)) s++;
-	if (*s) return *s+3;
-	else return NULL;
-};
-
-static void __init printsmallvendor(PnP_TAG_PACKET *pkt, int size) {
-	int i, c;
-	char decomp[4];
-#define p pkt->S14_Pack.S14_Data.S14_PPCPack
-	switch(p.Type) {
-	case 1:
-	  /* Decompress first 3 chars */
-	  c = *(unsigned short *)p.PPCData;
-	  decomp[0]='A'-1+((c>>10)&0x1F);
-	  decomp[1]='A'-1+((c>>5)&0x1F);
-	  decomp[2]='A'-1+(c&0x1F);
-	  decomp[3]=0;
-	  printk("    Chip identification: %s%4.4X\n",
-		 decomp, ld_le16((unsigned short *)(p.PPCData+2)));
-	  break;
-	default:
-	  printk("    Small vendor item type 0x%2.2x, data (hex): ",
-		 p.Type);
-	  for(i=0; i<size-2; i++) printk("%2.2x ", p.PPCData[i]);
-	  printk("\n");
-	  break;
-	}
-#undef p
-}
-
-static void __init printsmallpacket(PnP_TAG_PACKET * pkt, int size) {
-	static const unsigned char * intlevel[] = {"high", "low"};
-	static const unsigned char * intsense[] = {"edge", "level"};
-
-	switch (tag_small_item_name(pkt->S1_Pack.Tag)) {
-	case PnPVersion:
-	  printk("    PnPversion 0x%x.%x\n",
-		 pkt->S1_Pack.Version[0], /* How to interpret version ? */
-		 pkt->S1_Pack.Version[1]);
-	  break;
-//	case Logicaldevice:
-	  break;
-//	case CompatibleDevice:
-	  break;
-	case IRQFormat:
-#define p pkt->S4_Pack
-	  printk("    IRQ Mask 0x%4.4x, %s %s sensitive\n",
-		 ld_le16((unsigned short *)p.IRQMask),
-		 intlevel[(size>3) ? !(p.IRQInfo&0x05) : 0],
-		 intsense[(size>3) ? !(p.IRQInfo&0x03) : 0]);
-#undef p
-	  break;
-	case DMAFormat:
-#define p pkt->S5_Pack
-	  printk("    DMA channel mask 0x%2.2x, info 0x%2.2x\n",
-		 p.DMAMask, p.DMAInfo);
-#undef p
-	  break;
-	case StartDepFunc:
-	  printk("Start dependent function:\n");
-	  break;
-	case EndDepFunc:
-	  printk("End dependent function\n");
-	  break;
-	case IOPort:
-#define p pkt->S8_Pack
-	  printk("    Variable (%d decoded bits) I/O port\n"
-		 "      from 0x%4.4x to 0x%4.4x, alignment %d, %d ports\n",
-		 p.IOInfo&ISAAddr16bit?16:10,
-		 ld_le16((unsigned short *)p.RangeMin),
- 		 ld_le16((unsigned short *)p.RangeMax),
-		 p.IOAlign, p.IONum);
-#undef p
-	  break;
-	case FixedIOPort:
-#define p pkt->S9_Pack
-	  printk("    Fixed (10 decoded bits) I/O port from %3.3x to %3.3x\n",
-		 (p.Range[1]<<8)|p.Range[0],
-		 ((p.Range[1]<<8)|p.Range[0])+p.IONum-1);
-#undef p
-	  break;
-	case Res1:
-	case Res2:
-	case Res3:
-	  printk("    Undefined packet type %d!\n",
-		 tag_small_item_name(pkt->S1_Pack.Tag));
-	  break;
-	case SmallVendorItem:
-	  printsmallvendor(pkt,size);
-	  break;
-	default:
-	  printk("    Type 0x2.2x%d, size=%d\n",
-		 pkt->S1_Pack.Tag, size);
-	  break;
-	}
-}
-
-static void __init printlargevendor(PnP_TAG_PACKET * pkt, int size) {
-	static const unsigned char * addrtype[] = {"I/O", "Memory", "System"};
-	static const unsigned char * inttype[] = {"8259", "MPIC", "RS6k BUID %d"};
-	static const unsigned char * convtype[] = {"Bus Memory", "Bus I/O", "DMA"};
-	static const unsigned char * transtype[] = {"direct", "mapped", "direct-store segment"};
-	static const unsigned char * L2type[] = {"WriteThru", "CopyBack"};
-	static const unsigned char * L2assoc[] = {"DirectMapped", "2-way set"};
-
-	int i;
-	char tmpstr[30], *t;
-#define p pkt->L4_Pack.L4_Data.L4_PPCPack
-	switch(p.Type) {
-	case 2:
-	  printk("    %d K %s %s L2 cache, %d/%d bytes line/sector size\n",
-		 ld_le32((unsigned int *)p.PPCData),
-		 L2type[p.PPCData[10]-1],
-		 L2assoc[p.PPCData[4]-1],
-		 ld_le16((unsigned short *)p.PPCData+3),
-		 ld_le16((unsigned short *)p.PPCData+4));
-	  break;
-	case 3:
-	  printk("    PCI Bridge parameters\n"
-		 "      ConfigBaseAddress %0x\n"
-		 "      ConfigBaseData %0x\n"
-		 "      Bus number %d\n",
-		 ld_le32((unsigned int *)p.PPCData),
-		 ld_le32((unsigned int *)(p.PPCData+8)),
-		 p.PPCData[16]);
-	  for(i=20; i<size-4; i+=12) {
-	  	int j, first;
-	  	if(p.PPCData[i]) printk("      PCI Slot %d", p.PPCData[i]);
-		else printk ("      Integrated PCI device");
-		for(j=0, first=1, t=tmpstr; j<4; j++) {
-			int line=ld_le16((unsigned short *)(p.PPCData+i+4)+j);
-			if(line!=0xffff){
-			        if(first) first=0; else *t++='/';
-				*t++='A'+j;
-			}
-		}
-		*t='\0';
-		printk(" DevFunc 0x%x interrupt line(s) %s routed to",
-		       p.PPCData[i+1],tmpstr);
-		sprintf(tmpstr,
-			inttype[p.PPCData[i+2]-1],
-			p.PPCData[i+3]);
-		printk(" %s line(s) ",
-		       tmpstr);
-		for(j=0, first=1, t=tmpstr; j<4; j++) {
-			int line=ld_le16((unsigned short *)(p.PPCData+i+4)+j);
-			if(line!=0xffff){
-				if(first) first=0; else *t++='/';
-				t+=sprintf(t,"%d(%c)",
-					   line&0x7fff,
-					   line&0x8000?'E':'L');
-			}
-		}
-		printk("%s\n",tmpstr);
-	  }
-	  break;
-	case 5:
-	  printk("    Bridge address translation, %s decoding:\n"
-		 "      Processor  Bus        Size       Conversion Translation\n"
-		 "      0x%8.8x 0x%8.8x 0x%8.8x %s %s\n",
-		 p.PPCData[0]&1 ? "positive" : "subtractive",
-		 ld_le32((unsigned int *)p.PPCData+1),
-		 ld_le32((unsigned int *)p.PPCData+3),
-		 ld_le32((unsigned int *)p.PPCData+5),
-		 convtype[p.PPCData[2]-1],
-		 transtype[p.PPCData[1]-1]);
-	  break;
-	case 6:
-	  printk("    Bus speed %d Hz, %d slot(s)\n",
-		 ld_le32((unsigned int *)p.PPCData),
-		 p.PPCData[4]);
-	  break;
-	case 7:
-	  printk("    SCSI buses: %d, id(s):", p.PPCData[0]);
-	  for(i=1; i<=p.PPCData[0]; i++)
-	    printk(" %d%c", p.PPCData[i], i==p.PPCData[0] ? '\n' : ',');
-	  break;
-	case 9:
-	  printk("    %s address (%d bits), at 0x%x size 0x%x bytes\n",
-		 addrtype[p.PPCData[0]-1],
-		 p.PPCData[1],
-		 ld_le32((unsigned int *)(p.PPCData+4)),
-		 ld_le32((unsigned int *)(p.PPCData+12)));
-	  break;
-	case 10:
-	  sprintf(tmpstr,
-		  inttype[p.PPCData[0]-1],
-		  p.PPCData[1]);
-
-	  printk("    ISA interrupts routed to %s\n"
-		 "      lines",
-		 tmpstr);
-	  for(i=0; i<16; i++) {
-	  	int line=ld_le16((unsigned short *)p.PPCData+i+1);
-		if (line!=0xffff) printk(" %d(IRQ%d)", line, i);
-	  }
-	  printk("\n");
-	  break;
-	default:
-	  printk("    Large vendor item type 0x%2.2x\n      Data (hex):",
-		 p.Type);
-	  for(i=0; i<size-4; i++) printk(" %2.2x", p.PPCData[i]);
-	  printk("\n");
-#undef p
-	}
-}
-
-static void __init printlargepacket(PnP_TAG_PACKET * pkt, int size) {
-	switch (tag_large_item_name(pkt->S1_Pack.Tag)) {
-	case LargeVendorItem:
-	  printlargevendor(pkt, size);
-	  break;
-	default:
-	  printk("    Type 0x2.2x%d, size=%d\n",
-		 pkt->S1_Pack.Tag, size);
-	  break;
-	}
-}
-
-static void __init printpackets(PnP_TAG_PACKET * pkt, const char * cat)
-{
-	if (pkt->S1_Pack.Tag== END_TAG) {
-		printk("  No packets describing %s resources.\n", cat);
-		return;
-	}
-	printk(  "  Packets describing %s resources:\n",cat);
-	do {
-		int size;
-		if (tag_type(pkt->S1_Pack.Tag)) {
-		  	size= 3 +
-			  pkt->L1_Pack.Count0 +
-			  pkt->L1_Pack.Count1*256;
-			printlargepacket(pkt, size);
-		} else {
-			size=tag_small_count(pkt->S1_Pack.Tag)+1;
-			printsmallpacket(pkt, size);
-		}
-		pkt = (PnP_TAG_PACKET *)((unsigned char *) pkt + size);
-	} while (pkt->S1_Pack.Tag != END_TAG);
-}
-
-void __init print_residual_device_info(void)
-{
-	int i;
-	PPC_DEVICE *dev;
-#define did dev->DeviceId
-
-	/* make sure we have residual data first */
-	if (!have_residual_data)
-		return;
-
-	printk("Residual: %ld devices\n", res->ActualNumDevices);
-	for ( i = 0;
-	      i < res->ActualNumDevices ;
-	      i++)
-	{
-	  	char decomp[4], sn[20];
-		const char * s;
-		dev = &res->Devices[i];
-		s = PnP_INTERFACE_STR(did.BaseType, did.SubType,
-				      did.Interface);
-		if(!s) {
-			sprintf(sn, "interface %d", did.Interface);
-			s=sn;
-		}
-		if ( did.BusId & PCIDEVICE )
-		  printk("PCI Device, Bus %d, DevFunc 0x%x:",
-			 dev->BusAccess.PCIAccess.BusNumber,
-			 dev->BusAccess.PCIAccess.DevFuncNumber);
-	       	if ( did.BusId & PNPISADEVICE ) printk("PNPISA Device:");
-		if ( did.BusId & ISADEVICE )
-		  printk("ISA Device, Slot %d, LogicalDev %d:",
-			 dev->BusAccess.ISAAccess.SlotNumber,
-			 dev->BusAccess.ISAAccess.LogicalDevNumber);
-		if ( did.BusId & EISADEVICE ) printk("EISA Device:");
-		if ( did.BusId & PROCESSORDEVICE )
-		  printk("ProcBus Device, Bus %d, BUID %d: ",
-			 dev->BusAccess.ProcBusAccess.BusNumber,
-			 dev->BusAccess.ProcBusAccess.BUID);
-		if ( did.BusId & PCMCIADEVICE ) printk("PCMCIA ");
-		if ( did.BusId & VMEDEVICE ) printk("VME ");
-		if ( did.BusId & MCADEVICE ) printk("MCA ");
-		if ( did.BusId & MXDEVICE ) printk("MX ");
-		/* Decompress first 3 chars */
-		decomp[0]='A'-1+((did.DevId>>26)&0x1F);
-		decomp[1]='A'-1+((did.DevId>>21)&0x1F);
-		decomp[2]='A'-1+((did.DevId>>16)&0x1F);
-		decomp[3]=0;
-		printk(" %s%4.4lX, %s, %s, %s\n",
-		       decomp, did.DevId&0xffff,
-		       PnP_BASE_TYPES[did.BaseType],
-		       PnP_SUB_TYPE_STR(did.BaseType,did.SubType),
-		       s);
-		if ( dev->AllocatedOffset )
-			printpackets( (union _PnP_TAG_PACKET *)
-				      &res->DevicePnPHeap[dev->AllocatedOffset],
-				      "allocated");
-		if ( dev->PossibleOffset )
-			printpackets( (union _PnP_TAG_PACKET *)
-				      &res->DevicePnPHeap[dev->PossibleOffset],
-				      "possible");
-		if ( dev->CompatibleOffset )
-			printpackets( (union _PnP_TAG_PACKET *)
-				      &res->DevicePnPHeap[dev->CompatibleOffset],
-				      "compatible");
-	}
-}
-
-
-#if 0
-static void __init printVPD(void) {
-#define vpd res->VitalProductData
-	int ps=vpd.PageSize, i, j;
-	static const char* Usage[]={
-	  "FirmwareStack",  "FirmwareHeap",  "FirmwareCode", "BootImage",
-	  "Free", "Unpopulated", "ISAAddr", "PCIConfig",
-	  "IOMemory", "SystemIO", "SystemRegs", "PCIAddr",
-	  "UnPopSystemRom", "SystemROM", "ResumeBlock", "Other"
-	};
-	static const unsigned char *FWMan[]={
-	  "IBM", "Motorola", "FirmWorks", "Bull"
-	};
-	static const unsigned char *FWFlags[]={
-	  "Conventional", "OpenFirmware", "Diagnostics", "LowDebug",
-	  "MultiBoot", "LowClient", "Hex41", "FAT",
-	  "ISO9660", "SCSI_ID_Override", "Tape_Boot", "FW_Boot_Path"
-	};
-	static const unsigned char *ESM[]={
-	  "Port92", "PCIConfigA8", "FF001030", "????????"
-	};
-	static const unsigned char *SIOM[]={
-	  "Port850", "????????", "PCIConfigA8", "????????"
-	};
-
-	printk("Model: %s\n",vpd.PrintableModel);
-	printk("Serial: %s\n", vpd.Serial);
-	printk("FirmwareSupplier: %s\n", FWMan[vpd.FirmwareSupplier]);
-	printk("FirmwareFlags:");
-	for(j=0; j<12; j++) {
-	  	if (vpd.FirmwareSupports & (1<<j)) {
-			printk(" %s%c", FWFlags[j],
-			       vpd.FirmwareSupports&(-2<<j) ? ',' : '\n');
-		}
-	}
-	printk("NVRamSize: %ld\n", vpd.NvramSize);
-	printk("SIMMslots: %ld\n", vpd.NumSIMMSlots);
-	printk("EndianSwitchMethod: %s\n",
-	       ESM[vpd.EndianSwitchMethod>2 ? 2 : vpd.EndianSwitchMethod]);
-	printk("SpreadIOMethod: %s\n",
-	       SIOM[vpd.SpreadIOMethod>3 ? 3 : vpd.SpreadIOMethod]);
-	printk("Processor/Bus frequencies (Hz): %ld/%ld\n",
-	       vpd.ProcessorHz, vpd.ProcessorBusHz);
-	printk("Time Base Divisor: %ld\n", vpd.TimeBaseDivisor);
-	printk("WordWidth, PageSize: %ld, %d\n", vpd.WordWidth, ps);
-	printk("Cache sector size, Lock granularity: %ld, %ld\n",
-	       vpd.CoherenceBlockSize, vpd.GranuleSize);
-	for (i=0; i<res->ActualNumMemSegs; i++) {
-		int mask=res->Segs[i].Usage, first, j;
-		printk("%8.8lx-%8.8lx ",
-		       res->Segs[i].BasePage*ps,
-		       (res->Segs[i].PageCount+res->Segs[i].BasePage)*ps-1);
-		for(j=15, first=1; j>=0; j--) {
-			if (mask&(1<<j)) {
-				if (first) first=0;
-				else printk(", ");
-				printk("%s", Usage[j]);
-			}
-		}
-		printk("\n");
-	}
-}
-
-/*
- * Spit out some info about residual data
- */
-void print_residual_device_info(void)
-{
-	int i;
-	union _PnP_TAG_PACKET *pkt;
-	PPC_DEVICE *dev;
-#define did dev->DeviceId
-
-	/* make sure we have residual data first */
-	if (!have_residual_data)
-		return;
-	printk("Residual: %ld devices\n", res->ActualNumDevices);
-	for ( i = 0;
-	      i < res->ActualNumDevices ;
-	      i++)
-	{
-		dev = &res->Devices[i];
-		/*
-		 * pci devices
-		 */
-		if ( did.BusId & PCIDEVICE )
-		{
-			printk("PCI Device:");
-			/* unknown vendor */
-			if ( !strncmp( "Unknown", pci_strvendor(did.DevId>>16), 7) )
-				printk(" id %08lx types %d/%d", did.DevId,
-				       did.BaseType, did.SubType);
-			/* known vendor */
-			else
-				printk(" %s %s",
-				       pci_strvendor(did.DevId>>16),
-				       pci_strdev(did.DevId>>16,
-						  did.DevId&0xffff)
-					);
-
-			if ( did.BusId & PNPISADEVICE )
-			{
-				printk(" pnp:");
-				/* get pnp info on the device */
-				pkt = (union _PnP_TAG_PACKET *)
-					&res->DevicePnPHeap[dev->AllocatedOffset];
-				for (; pkt->S1_Pack.Tag != DF_END_TAG;
-				     pkt++ )
-				{
-					if ( (pkt->S1_Pack.Tag == S4_Packet) ||
-					     (pkt->S1_Pack.Tag == S4_Packet_flags) )
-						printk(" irq %02x%02x",
-						       pkt->S4_Pack.IRQMask[0],
-						       pkt->S4_Pack.IRQMask[1]);
-				}
-			}
-			printk("\n");
-			continue;
-		}
-		/*
-		 * isa devices
-		 */
-		if ( did.BusId & ISADEVICE )
-		{
-			printk("ISA Device: basetype: %d subtype: %d",
-			       did.BaseType, did.SubType);
-			printk("\n");
-			continue;
-		}
-		/*
-		 * eisa devices
-		 */
-		if ( did.BusId & EISADEVICE )
-		{
-			printk("EISA Device: basetype: %d subtype: %d",
-			       did.BaseType, did.SubType);
-			printk("\n");
-			continue;
-		}
-		/*
-		 * proc bus devices
-		 */
-		if ( did.BusId & PROCESSORDEVICE )
-		{
-			printk("ProcBus Device: basetype: %d subtype: %d",
-			       did.BaseType, did.SubType);
-			printk("\n");
-			continue;
-		}
-		/*
-		 * pcmcia devices
-		 */
-		if ( did.BusId & PCMCIADEVICE )
-		{
-			printk("PCMCIA Device: basetype: %d subtype: %d",
-			       did.BaseType, did.SubType);
-			printk("\n");
-			continue;
-		}
-		printk("Unknown bus access device: busid %lx\n",
-		       did.BusId);
-	}
-}
-#endif
-
-/* Returns the device index in the residual data,
-   any of the search items may be set as -1 for wildcard,
-   DevID number field (second halfword) is big endian !
-
-   Examples:
-   - search for the Interrupt controller (8259 type), 2 methods:
-     1) i8259 = residual_find_device(~0,
-                                     NULL,
-				     SystemPeripheral,
-				     ProgrammableInterruptController,
-				     ISA_PIC,
-				     0);
-     2) i8259 = residual_find_device(~0, "PNP0000", -1, -1, -1, 0)
-
-   - search for the first two serial devices, whatever their type)
-     iserial1 = residual_find_device(~0,NULL,
-                                     CommunicationsDevice,
-				     RS232Device,
-				     -1, 0)
-     iserial2 = residual_find_device(~0,NULL,
-                                     CommunicationsDevice,
-				     RS232Device,
-				     -1, 1)
-   - but search for typical COM1 and COM2 is not easy due to the
-     fact that the interface may be anything and the name "PNP0500" or
-     "PNP0501". Quite bad.
-
-*/
-
-/* devid are easier to uncompress than to compress, so to minimize bloat
-in this rarely used area we unencode and compare */
-
-/* in residual data number is big endian in the device table and
-little endian in the heap, so we use two parameters to avoid writing
-two very similar functions */
-
-static int __init same_DevID(unsigned short vendor,
-	       unsigned short Number,
-	       char * str)
-{
-	static unsigned const char hexdigit[]="0123456789ABCDEF";
-	if (strlen(str)!=7) return 0;
-	if ( ( ((vendor>>10)&0x1f)+'A'-1 == str[0])  &&
-	     ( ((vendor>>5)&0x1f)+'A'-1 == str[1])   &&
-	     ( (vendor&0x1f)+'A'-1 == str[2])        &&
-	     (hexdigit[(Number>>12)&0x0f] == str[3]) &&
-	     (hexdigit[(Number>>8)&0x0f] == str[4])  &&
-	     (hexdigit[(Number>>4)&0x0f] == str[5])  &&
-	     (hexdigit[Number&0x0f] == str[6]) ) return 1;
-	return 0;
-}
-
-PPC_DEVICE __init *residual_find_device(unsigned long BusMask,
-			 unsigned char * DevID,
-			 int BaseType,
-			 int SubType,
-			 int Interface,
-			 int n)
-{
-	int i;
-	if (!have_residual_data) return NULL;
-	for (i=0; i<res->ActualNumDevices; i++) {
-#define Dev res->Devices[i].DeviceId
-		if ( (Dev.BusId&BusMask)                                  &&
-		     (BaseType==-1 || Dev.BaseType==BaseType)             &&
-		     (SubType==-1 || Dev.SubType==SubType)                &&
-		     (Interface==-1 || Dev.Interface==Interface)          &&
-		     (DevID==NULL || same_DevID((Dev.DevId>>16)&0xffff,
-						Dev.DevId&0xffff, DevID)) &&
-		     !(n--) ) return res->Devices+i;
-#undef Dev
-	}
-	return NULL;
-}
-
-PPC_DEVICE __init *residual_find_device_id(unsigned long BusMask,
-			 unsigned short DevID,
-			 int BaseType,
-			 int SubType,
-			 int Interface,
-			 int n)
-{
-	int i;
-	if (!have_residual_data) return NULL;
-	for (i=0; i<res->ActualNumDevices; i++) {
-#define Dev res->Devices[i].DeviceId
-		if ( (Dev.BusId&BusMask)                                  &&
-		     (BaseType==-1 || Dev.BaseType==BaseType)             &&
-		     (SubType==-1 || Dev.SubType==SubType)                &&
-		     (Interface==-1 || Dev.Interface==Interface)          &&
-		     (DevID==0xffff || (Dev.DevId&0xffff) == DevID)	  &&
-		     !(n--) ) return res->Devices+i;
-#undef Dev
-	}
-	return NULL;
-}
-
-static int __init
-residual_scan_pcibridge(PnP_TAG_PACKET * pkt, struct pci_dev *dev)
-{
-	int irq = -1;
-
-#define data pkt->L4_Pack.L4_Data.L4_PPCPack.PPCData
-	if (dev->bus->number == data[16]) {
-		int i, size;
-
-		size = 3 + ld_le16((u_short *) (&pkt->L4_Pack.Count0));
-		for (i = 20; i < size - 4; i += 12) {
-			unsigned char pin;
-			int line_irq;
-
-			if (dev->devfn != data[i + 1])
-				continue;
-
-			pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
-			if (pin) {
-				line_irq = ld_le16((unsigned short *)
-						(&data[i + 4 + 2 * (pin - 1)]));
-				irq = (line_irq == 0xffff) ? 0
-							   : line_irq & 0x7fff;
-			} else
-				irq = 0;
-
-			break;
-		}
-	}
-#undef data
-
-	return irq;
-}
-
-int __init
-residual_pcidev_irq(struct pci_dev *dev)
-{
-	int i = 0;
-	int irq = -1;
-	PPC_DEVICE *bridge;
-
-	while ((bridge = residual_find_device
-	       (-1, NULL, BridgeController, PCIBridge, -1, i++))) {
-
-		PnP_TAG_PACKET *pkt;
-		if (bridge->AllocatedOffset) {
-			pkt = PnP_find_large_vendor_packet(res->DevicePnPHeap +
-					   bridge->AllocatedOffset, 3, 0);
-			if (!pkt)
-				continue;
-
-			irq = residual_scan_pcibridge(pkt, dev);
-			if (irq != -1)
-				break;
-		}
-	}
-
-	return (irq < 0) ? 0 : irq;
-}
-
-void __init residual_irq_mask(char *irq_edge_mask_lo, char *irq_edge_mask_hi)
-{
-	PPC_DEVICE *dev;
-	int i = 0;
-	unsigned short irq_mask = 0x000; /* default to edge */
-
-	while ((dev = residual_find_device(-1, NULL, -1, -1, -1, i++))) {
-		PnP_TAG_PACKET *pkt;
-		unsigned short mask;
-		int size;
-		int offset = dev->AllocatedOffset;
-
-		if (!offset)
-			continue;
-
-		pkt = PnP_find_packet(res->DevicePnPHeap + offset,
-					      IRQFormat, 0);
-		if (!pkt)
-			continue;
-
-		size = tag_small_count(pkt->S1_Pack.Tag) + 1;
-		mask = ld_le16((unsigned short *)pkt->S4_Pack.IRQMask);
-		if (size > 3 && (pkt->S4_Pack.IRQInfo & 0x0c))
-			irq_mask |= mask;
-	}
-
-	*irq_edge_mask_lo = irq_mask & 0xff;
-	*irq_edge_mask_hi = irq_mask >> 8;
-}
-
-unsigned int __init residual_isapic_addr(void)
-{
-	PPC_DEVICE *isapic;
-	PnP_TAG_PACKET *pkt;
-	unsigned int addr;
-
-	isapic = residual_find_device(~0, NULL, SystemPeripheral,
-				      ProgrammableInterruptController,
-				      ISA_PIC, 0);
-	if (!isapic)
-		goto unknown;
-
-	pkt = PnP_find_large_vendor_packet(res->DevicePnPHeap +
-						isapic->AllocatedOffset, 9, 0);
-	if (!pkt)
-		goto unknown;
-
-#define p pkt->L4_Pack.L4_Data.L4_PPCPack
-	/* Must be 32-bit system address */
-	if (!((p.PPCData[0] == 3) && (p.PPCData[1] == 32)))
-		goto unknown;
-
-	/* It doesn't seem to work where length != 1 (what can I say? :-/ ) */
-	if (ld_le32((unsigned int *)(p.PPCData + 12)) != 1)
-		goto unknown;
-
-	addr = ld_le32((unsigned int *) (p.PPCData + 4));
-#undef p
-	return addr;
-unknown:
-	return 0;
-}
-
-PnP_TAG_PACKET *PnP_find_packet(unsigned char *p,
-				unsigned packet_tag,
-				int n)
-{
-	unsigned mask, masked_tag, size;
-	if(!p) return NULL;
-	if (tag_type(packet_tag)) mask=0xff; else mask=0xF8;
-	masked_tag = packet_tag&mask;
-	for(; *p != END_TAG; p+=size) {
-		if ((*p & mask) == masked_tag && !(n--))
-			return (PnP_TAG_PACKET *) p;
-		if (tag_type(*p))
-			size=ld_le16((unsigned short *)(p+1))+3;
-		else
-			size=tag_small_count(*p)+1;
-	}
-	return NULL; /* not found */
-}
-
-PnP_TAG_PACKET __init *PnP_find_small_vendor_packet(unsigned char *p,
-					     unsigned packet_type,
-					     int n)
-{
-	int next=0;
-	while (p) {
-		p = (unsigned char *) PnP_find_packet(p, 0x70, next);
-		if (p && p[1]==packet_type && !(n--))
-			return (PnP_TAG_PACKET *) p;
-		next = 1;
-	};
-	return NULL; /* not found */
-}
-
-PnP_TAG_PACKET __init *PnP_find_large_vendor_packet(unsigned char *p,
-					   unsigned packet_type,
-					   int n)
-{
-	int next=0;
-	while (p) {
-		p = (unsigned char *) PnP_find_packet(p, 0x84, next);
-		if (p && p[3]==packet_type && !(n--))
-			return (PnP_TAG_PACKET *) p;
-		next = 1;
-	};
-	return NULL; /* not found */
-}
-
-#ifdef CONFIG_PROC_PREPRESIDUAL
-static int proc_prep_residual_read(char * buf, char ** start, off_t off,
-		int count, int *eof, void *data)
-{
-	int n;
-
-	n = res->ResidualLength - off;
-	if (n < 0) {
-		*eof = 1;
-		n = 0;
-	}
-	else {
-		if (n > count)
-			n = count;
-		else
-			*eof = 1;
-
-		memcpy(buf, (char *)res + off, n);
-		*start = buf;
-	}
-
-	return n;
-}
-
-int __init
-proc_prep_residual_init(void)
-{
-	if (have_residual_data)
-		create_proc_read_entry("residual", S_IRUGO, NULL,
-					proc_prep_residual_read, NULL);
-	return 0;
-}
-
-__initcall(proc_prep_residual_init);
-#endif
diff --git a/arch/ppc/platforms/rpx8260.h b/arch/ppc/platforms/rpx8260.h
deleted file mode 100644
index 843494a50ef3..000000000000
--- a/arch/ppc/platforms/rpx8260.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the Embedded Planet RPX6 (or RPX Super) MPC8260 board.
- * Copied from the RPX-Classic and SBS8260 stuff.
- *
- * Copyright (c) 2001 Dan Malek <dan@embeddededge.com>
- */
-#ifdef __KERNEL__
-#ifndef __ASM_PLATFORMS_RPX8260_H__
-#define __ASM_PLATFORMS_RPX8260_H__
-
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_nvsize;	/* NVRAM size in bytes (can be 0) */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in MHz */
-	unsigned int	bi_cpmfreq;	/* CPM Freq, in MHz */
-	unsigned int	bi_brgfreq;	/* BRG Freq, in MHz */
-	unsigned int	bi_vco;		/* VCO Out from PLL */
-	unsigned int	bi_baudrate;	/* Default console baud rate */
-	unsigned int	bi_immr;	/* IMMR when called from boot rom */
-	unsigned char	bi_enetaddr[6];
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-/* Memory map is configured by the PROM startup.
- * We just map a few things we need.  The CSR is actually 4 byte-wide
- * registers that can be accessed as 8-, 16-, or 32-bit values.
- */
-#define CPM_MAP_ADDR		((uint)0xf0000000)
-#define RPX_CSR_ADDR		((uint)0xfa000000)
-#define RPX_CSR_SIZE		((uint)(512 * 1024))
-#define RPX_NVRTC_ADDR		((uint)0xfa080000)
-#define RPX_NVRTC_SIZE		((uint)(512 * 1024))
-
-/* The RPX6 has 16, byte wide control/status registers.
- * Not all are used (yet).
- */
-extern volatile u_char *rpx6_csr_addr;
-
-/* Things of interest in the CSR.
-*/
-#define BCSR0_ID_MASK		((u_char)0xf0)		/* Read only */
-#define BCSR0_SWITCH_MASK	((u_char)0x0f)		/* Read only */
-#define BCSR1_XCVR_SMC1		((u_char)0x80)
-#define BCSR1_XCVR_SMC2		((u_char)0x40)
-#define BCSR2_FLASH_WENABLE	((u_char)0x20)
-#define BCSR2_NVRAM_ENABLE	((u_char)0x10)
-#define BCSR2_ALT_IRQ2		((u_char)0x08)
-#define BCSR2_ALT_IRQ3		((u_char)0x04)
-#define BCSR2_PRST		((u_char)0x02)		/* Force reset */
-#define BCSR2_ENPRST		((u_char)0x01)		/* Enable POR */
-#define BCSR3_MODCLK_MASK	((u_char)0xe0)
-#define BCSR3_ENCLKHDR		((u_char)0x10)
-#define BCSR3_LED5		((u_char)0x04)		/* 0 == on */
-#define BCSR3_LED6		((u_char)0x02)		/* 0 == on */
-#define BCSR3_LED7		((u_char)0x01)		/* 0 == on */
-#define BCSR4_EN_PHY		((u_char)0x80)		/* Enable PHY */
-#define BCSR4_EN_MII		((u_char)0x40)		/* Enable PHY */
-#define BCSR4_MII_READ		((u_char)0x04)
-#define BCSR4_MII_MDC		((u_char)0x02)
-#define BCSR4_MII_MDIO		((u_char)0x01)
-#define BCSR13_FETH_IRQMASK	((u_char)0xf0)
-#define BCSR15_FETH_IRQ		((u_char)0x20)
-
-#define PHY_INTERRUPT	SIU_INT_IRQ7
-
-/* For our show_cpuinfo hooks. */
-#define CPUINFO_VENDOR		"Embedded Planet"
-#define CPUINFO_MACHINE		"EP8260 PowerPC"
-
-/* Warm reset vector. */
-#define BOOTROM_RESTART_ADDR	((uint)0xfff00104)
-
-#endif /* __ASM_PLATFORMS_RPX8260_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/rpxclassic.h b/arch/ppc/platforms/rpxclassic.h
deleted file mode 100644
index a3c1118e5b09..000000000000
--- a/arch/ppc/platforms/rpxclassic.h
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the RPCG RPX-Classic board.  Copied from the RPX-Lite stuff.
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- */
-#ifdef __KERNEL__
-#ifndef __MACH_RPX_DEFS
-#define __MACH_RPX_DEFS
-
-
-#ifndef __ASSEMBLY__
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
-	unsigned char	bi_enetaddr[6];
-	unsigned int	bi_baudrate;
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-/* Memory map is configured by the PROM startup.
- * We just map a few things we need.  The CSR is actually 4 byte-wide
- * registers that can be accessed as 8-, 16-, or 32-bit values.
- */
-#define PCI_ISA_IO_ADDR		((unsigned)0x80000000)
-#define PCI_ISA_IO_SIZE		((uint)(512 * 1024 * 1024))
-#define PCI_ISA_MEM_ADDR	((unsigned)0xc0000000)
-#define PCI_ISA_MEM_SIZE	((uint)(512 * 1024 * 1024))
-#define RPX_CSR_ADDR		((uint)0xfa400000)
-#define RPX_CSR_SIZE		((uint)(4 * 1024))
-#define IMAP_ADDR		((uint)0xfa200000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-#define PCI_CSR_ADDR		((uint)0x80000000)
-#define PCI_CSR_SIZE		((uint)(64 * 1024))
-#define PCMCIA_MEM_ADDR		((uint)0xe0000000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-#define PCMCIA_IO_ADDR		((uint)0xe4000000)
-#define PCMCIA_IO_SIZE		((uint)(4 * 1024))
-#define PCMCIA_ATTRB_ADDR	((uint)0xe8000000)
-#define PCMCIA_ATTRB_SIZE	((uint)(4 * 1024))
-
-/* Things of interest in the CSR.
-*/
-#define BCSR0_ETHEN		((uint)0x80000000)
-#define BCSR0_ETHLPBK		((uint)0x40000000)
-#define BCSR0_COLTESTDIS	((uint)0x20000000)
-#define BCSR0_FULLDPLXDIS	((uint)0x10000000)
-#define BCSR0_ENFLSHSEL		((uint)0x04000000)
-#define BCSR0_FLASH_SEL		((uint)0x02000000)
-#define BCSR0_ENMONXCVR		((uint)0x01000000)
-
-#define BCSR0_PCMCIAVOLT	((uint)0x000f0000)	/* CLLF */
-#define BCSR0_PCMCIA3VOLT	((uint)0x000a0000)	/* CLLF */
-#define BCSR0_PCMCIA5VOLT	((uint)0x00060000)	/* CLLF */
-
-#define BCSR1_IPB5SEL           ((uint)0x00100000)
-#define BCSR1_PCVCTL4           ((uint)0x00080000)
-#define BCSR1_PCVCTL5           ((uint)0x00040000)
-#define BCSR1_PCVCTL6           ((uint)0x00020000)
-#define BCSR1_PCVCTL7           ((uint)0x00010000)
-
-#define BCSR2_EN232XCVR		((uint)0x00008000)
-#define BCSR2_QSPACESEL		((uint)0x00004000)
-#define BCSR2_FETHLEDMODE	((uint)0x00000800)	/* CLLF */
-
-/* define IO_BASE for pcmcia, CLLF only */
-#if !defined(CONFIG_PCI)
-#define _IO_BASE 0x80000000
-#define _IO_BASE_SIZE 0x1000
-
-/* for pcmcia sandisk */
-#ifdef CONFIG_IDE
-# define MAX_HWIFS 1
-#endif
-#endif
-
-/* Interrupt level assignments.
-*/
-#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
-
-
-/* CPM Ethernet through SCCx.
- *
- * Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PB_ENET_TENA	((uint)0x00001000)
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000003d)
-
-/* We don't use the 8259.
-*/
-
-#define NR_8259_INTS	0
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __MACH_RPX_DEFS */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/rpxlite.h b/arch/ppc/platforms/rpxlite.h
deleted file mode 100644
index b615501d55fc..000000000000
--- a/arch/ppc/platforms/rpxlite.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * A collection of structures, addresses, and values associated with
- * the RPCG RPX-Lite board.  Copied from the MBX stuff.
- *
- * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
- */
-#ifdef __KERNEL__
-#ifndef __MACH_RPX_DEFS
-#define __MACH_RPX_DEFS
-
-
-#ifndef __ASSEMBLY__
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in Hz */
-	unsigned char	bi_enetaddr[6];
-	unsigned int	bi_baudrate;
-} bd_t;
-
-extern bd_t m8xx_board_info;
-
-/* Memory map is configured by the PROM startup.
- * We just map a few things we need.  The CSR is actually 4 byte-wide
- * registers that can be accessed as 8-, 16-, or 32-bit values.
- */
-#define RPX_CSR_ADDR		((uint)0xfa400000)
-#define RPX_CSR_SIZE		((uint)(4 * 1024))
-#define IMAP_ADDR		((uint)0xfa200000)
-#define IMAP_SIZE		((uint)(64 * 1024))
-#define PCMCIA_MEM_ADDR		((uint)0x04000000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-#define PCMCIA_IO_ADDR		((uint)0x04400000)
-#define PCMCIA_IO_SIZE		((uint)(4 * 1024))
-
-/* Things of interest in the CSR.
-*/
-#define BCSR0_ETHEN		((uint)0x80000000)
-#define BCSR0_ETHLPBK		((uint)0x40000000)
-#define BCSR0_COLTESTDIS	((uint)0x20000000)
-#define BCSR0_FULLDPLXDIS	((uint)0x10000000)
-#define BCSR0_LEDOFF		((uint)0x08000000)
-#define BCSR0_USBDISABLE	((uint)0x04000000)
-#define BCSR0_USBHISPEED	((uint)0x02000000)
-#define BCSR0_USBPWREN		((uint)0x01000000)
-#define BCSR0_PCMCIAVOLT	((uint)0x000f0000)
-#define BCSR0_PCMCIA3VOLT	((uint)0x000a0000)
-#define BCSR0_PCMCIA5VOLT	((uint)0x00060000)
-
-#define BCSR1_IPB5SEL          ((uint)0x00100000)
-#define BCSR1_PCVCTL4          ((uint)0x00080000)
-#define BCSR1_PCVCTL5          ((uint)0x00040000)
-#define BCSR1_PCVCTL6          ((uint)0x00020000)
-#define BCSR1_PCVCTL7          ((uint)0x00010000)
-
-/* define IO_BASE for pcmcia */
-#define _IO_BASE 0x80000000
-#define _IO_BASE_SIZE 0x1000
-
-#ifdef CONFIG_IDE
-# define MAX_HWIFS 1
-#endif
-
-/* CPM Ethernet through SCCx.
- *
- * This ENET stuff is for the MPC850 with ethernet on SCC2.  Some of
- * this may be unique to the RPX-Lite configuration.
- * Note TENA is on Port B.
- */
-#define PA_ENET_RXD	((ushort)0x0004)
-#define PA_ENET_TXD	((ushort)0x0008)
-#define PA_ENET_TCLK	((ushort)0x0200)
-#define PA_ENET_RCLK	((ushort)0x0800)
-#define PB_ENET_TENA	((uint)0x00002000)
-#define PC_ENET_CLSN	((ushort)0x0040)
-#define PC_ENET_RENA	((ushort)0x0080)
-
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00003d00)
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif /* !__ASSEMBLY__ */
-#endif /* __MACH_RPX_DEFS */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/sandpoint.c b/arch/ppc/platforms/sandpoint.c
deleted file mode 100644
index b4897bdb742a..000000000000
--- a/arch/ppc/platforms/sandpoint.c
+++ /dev/null
@@ -1,651 +0,0 @@
-/*
- * Board setup routines for the Motorola SPS Sandpoint Test Platform.
- *
- * Author: Mark A. Greer
- *	 mgreer@mvista.com
- *
- * 2000-2003 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * This file adds support for the Motorola SPS Sandpoint Test Platform.
- * These boards have a PPMC slot for the processor so any combination
- * of cpu and host bridge can be attached.  This port is for an 8240 PPMC
- * module from Motorola SPS and other closely related cpu/host bridge
- * combinations (e.g., 750/755/7400 with MPC107 host bridge).
- * The sandpoint itself has a Windbond 83c553 (PCI-ISA bridge, 2 DMA ctlrs, 2
- * cascaded 8259 interrupt ctlrs, 8254 Timer/Counter, and an IDE ctlr), a
- * National 87308 (RTC, 2 UARTs, Keyboard & mouse ctlrs, and a floppy ctlr),
- * and 4 PCI slots (only 2 of which are usable; the other 2 are keyed for 3.3V
- * but are really 5V).
- *
- * The firmware on the sandpoint is called DINK (not my acronym :).  This port
- * depends on DINK to do some basic initialization (e.g., initialize the memory
- * ctlr) and to ensure that the processor is using MAP B (CHRP map).
- *
- * The switch settings for the Sandpoint board MUST be as follows:
- * 	S3: down
- * 	S4: up
- * 	S5: up
- * 	S6: down
- *
- * 'down' is in the direction from the PCI slots towards the PPMC slot;
- * 'up' is in the direction from the PPMC slot towards the PCI slots.
- * Be careful, the way the sandpoint board is installed in XT chasses will
- * make the directions reversed.
- *
- * Since Motorola listened to our suggestions for improvement, we now have
- * the Sandpoint X3 board.  All of the PCI slots are available, it uses
- * the serial interrupt interface (just a hardware thing we need to
- * configure properly).
- *
- * Use the default X3 switch settings.  The interrupts are then:
- *		EPIC	Source
- *		  0	SIOINT 		(8259, active low)
- *		  1	PCI #1
- *		  2	PCI #2
- *		  3	PCI #3
- *		  4	PCI #4
- *		  7	Winbond INTC	(IDE interrupt)
- *		  8	Winbond INTD	(IDE interrupt)
- *
- *
- * Motorola has finally released a version of DINK32 that correctly
- * (seemingly) initializes the memory controller correctly, regardless
- * of the amount of memory in the system.  Once a method of determining
- * what version of DINK initializes the system for us, if applicable, is
- * found, we can hopefully stop hardcoding 32MB of RAM.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h>	/* for linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/time.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/prom.h>
-#include <asm/smp.h>
-#include <asm/vga.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/mpc10x.h>
-#include <asm/pci-bridge.h>
-#include <asm/kgdb.h>
-#include <asm/ppc_sys.h>
-
-#include "sandpoint.h"
-
-/* Set non-zero if an X2 Sandpoint detected. */
-static int sandpoint_is_x2;
-
-unsigned char __res[sizeof(bd_t)];
-
-static void sandpoint_halt(void);
-static void sandpoint_probe_type(void);
-
-/*
- * Define all of the IRQ senses and polarities.  Taken from the
- * Sandpoint X3 User's manual.
- */
-static u_char sandpoint_openpic_initsenses[] __initdata = {
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 0: SIOINT */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 2: PCI Slot 1 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 3: PCI Slot 2 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 4: PCI Slot 3 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 5: PCI Slot 4 */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* 8: IDE (INT C) */
-	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE)	/* 9: IDE (INT D) */
-};
-
-/*
- * Motorola SPS Sandpoint interrupt routing.
- */
-static inline int
-x3_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 16,  0,  0,  0 },	/* IDSEL 11 - i8259 on Winbond */
-		{  0,  0,  0,  0 },	/* IDSEL 12 - unused */
-		{ 18, 21, 20, 19 },	/* IDSEL 13 - PCI slot 1 */
-		{ 19, 18, 21, 20 },	/* IDSEL 14 - PCI slot 2 */
-		{ 20, 19, 18, 21 },	/* IDSEL 15 - PCI slot 3 */
-		{ 21, 20, 19, 18 },	/* IDSEL 16 - PCI slot 4 */
-	};
-
-	const long min_idsel = 11, max_idsel = 16, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static inline int
-x2_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	   A   B   C   D
-	 */
-	{
-		{ 18,  0,  0,  0 },	/* IDSEL 11 - i8259 on Windbond */
-		{  0,  0,  0,  0 },	/* IDSEL 12 - unused */
-		{ 16, 17, 18, 19 },	/* IDSEL 13 - PCI slot 1 */
-		{ 17, 18, 19, 16 },	/* IDSEL 14 - PCI slot 2 */
-		{ 18, 19, 16, 17 },	/* IDSEL 15 - PCI slot 3 */
-		{ 19, 16, 17, 18 },	/* IDSEL 16 - PCI slot 4 */
-	};
-
-	const long min_idsel = 11, max_idsel = 16, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __init
-sandpoint_setup_winbond_83553(struct pci_controller *hose)
-{
-	int		devfn;
-
-	/*
-	 * Route IDE interrupts directly to the 8259's IRQ 14 & 15.
-	 * We can't route the IDE interrupt to PCI INTC# or INTD# because those
-	 * woule interfere with the PMC's INTC# and INTD# lines.
-	 */
-	/*
-	 * Winbond Fcn 0
-	 */
-	devfn = PCI_DEVFN(11,0);
-
-	early_write_config_byte(hose,
-				0,
-				devfn,
-				0x43, /* IDE Interrupt Routing Control */
-				0xef);
-	early_write_config_word(hose,
-				0,
-				devfn,
-				0x44, /* PCI Interrupt Routing Control */
-				0x0000);
-
-	/* Want ISA memory cycles to be forwarded to PCI bus */
-	early_write_config_byte(hose,
-				0,
-				devfn,
-				0x48, /* ISA-to-PCI Addr Decoder Control */
-				0xf0);
-
-	/* Enable Port 92.  */
-	early_write_config_byte(hose,
-				0,
-				devfn,
-				0x4e,	/* AT System Control Register */
-				0x06);
-	/*
-	 * Winbond Fcn 1
-	 */
-	devfn = PCI_DEVFN(11,1);
-
-	/* Put IDE controller into native mode. */
-	early_write_config_byte(hose,
-				0,
-				devfn,
-				0x09,	/* Programming interface Register */
-				0x8f);
-
-	/* Init IRQ routing, enable both ports, disable fast 16 */
-	early_write_config_dword(hose,
-				0,
-				devfn,
-				0x40,	/* IDE Control/Status Register */
-				0x00ff0011);
-	return;
-}
-
-/* On the sandpoint X2, we must avoid sending configuration cycles to
- * device #12 (IDSEL addr = AD12).
- */
-static int
-x2_exclude_device(u_char bus, u_char devfn)
-{
-	if ((bus == 0) && (PCI_SLOT(devfn) == SANDPOINT_HOST_BRIDGE_IDSEL))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return PCIBIOS_SUCCESSFUL;
-}
-
-static void __init
-sandpoint_find_bridges(void)
-{
-	struct pci_controller	*hose;
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	if (mpc10x_bridge_init(hose,
-			       MPC10X_MEM_MAP_B,
-			       MPC10X_MEM_MAP_B,
-			       MPC10X_MAPB_EUMB_BASE) == 0) {
-
-		/* Do early winbond init, then scan PCI bus */
-		sandpoint_setup_winbond_83553(hose);
-		hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-		ppc_md.pcibios_fixup = NULL;
-		ppc_md.pcibios_fixup_bus = NULL;
-		ppc_md.pci_swizzle = common_swizzle;
-		if (sandpoint_is_x2) {
-			ppc_md.pci_map_irq = x2_map_irq;
-			ppc_md.pci_exclude_device = x2_exclude_device;
-		} else
-			ppc_md.pci_map_irq = x3_map_irq;
-	}
-	else {
-		if (ppc_md.progress)
-			ppc_md.progress("Bridge init failed", 0x100);
-		printk("Host bridge init failed\n");
-	}
-
-	return;
-}
-
-static void __init
-sandpoint_setup_arch(void)
-{
-	/* Probe for Sandpoint model */
-	sandpoint_probe_type();
-	if (sandpoint_is_x2)
-		epic_serial_mode = 0;
-
-	loops_per_jiffy = 100000000 / HZ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef	CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_HDA1;
-#endif
-
-	/* Lookup PCI host bridges */
-	sandpoint_find_bridges();
-
-	if (strncmp (cur_ppc_sys_spec->ppc_sys_name, "8245", 4) == 0)
-	{
-		bd_t *bp = (bd_t *)__res;
-		struct plat_serial8250_port *pdata;
-
-		pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_UART0);
-		if (pdata)
-		{
-			pdata[0].uartclk = bp->bi_busfreq;
-		}
-
-#ifdef CONFIG_SANDPOINT_ENABLE_UART1
-		pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC10X_UART1);
-		if (pdata)
-		{
-			pdata[0].uartclk = bp->bi_busfreq;
-		}
-#else
-		ppc_sys_device_remove(MPC10X_UART1);
-#endif
-	}
-
-	printk(KERN_INFO "Motorola SPS Sandpoint Test Platform\n");
-	printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n");
-
-	/* DINK32 12.3 and below do not correctly enable any caches.
-	 * We will do this now with good known values.  Future versions
-	 * of DINK32 are supposed to get this correct.
-	 */
-	if (cpu_has_feature(CPU_FTR_SPEC7450))
-		/* 745x is different.  We only want to pass along enable. */
-		_set_L2CR(L2CR_L2E);
-	else if (cpu_has_feature(CPU_FTR_L2CR))
-		/* All modules have 1MB of L2.  We also assume that an
-		 * L2 divisor of 3 will work.
-		 */
-		_set_L2CR(L2CR_L2E | L2CR_L2SIZ_1MB | L2CR_L2CLK_DIV3
-				| L2CR_L2RAM_PIPE | L2CR_L2OH_1_0 | L2CR_L2DF);
-#if 0
-	/* Untested right now. */
-	if (cpu_has_feature(CPU_FTR_L3CR)) {
-		/* Magic value. */
-		_set_L3CR(0x8f032000);
-	}
-#endif
-}
-
-#define	SANDPOINT_87308_CFG_ADDR		0x15c
-#define	SANDPOINT_87308_CFG_DATA		0x15d
-
-#define	SANDPOINT_87308_CFG_INB(addr, byte) {				\
-	outb((addr), SANDPOINT_87308_CFG_ADDR);				\
-	(byte) = inb(SANDPOINT_87308_CFG_DATA);				\
-}
-
-#define	SANDPOINT_87308_CFG_OUTB(addr, byte) {				\
-	outb((addr), SANDPOINT_87308_CFG_ADDR);				\
-	outb((byte), SANDPOINT_87308_CFG_DATA);				\
-}
-
-#define SANDPOINT_87308_SELECT_DEV(dev_num) {				\
-	SANDPOINT_87308_CFG_OUTB(0x07, (dev_num));			\
-}
-
-#define	SANDPOINT_87308_DEV_ENABLE(dev_num) {				\
-	SANDPOINT_87308_SELECT_DEV(dev_num);				\
-	SANDPOINT_87308_CFG_OUTB(0x30, 0x01);				\
-}
-
-/*
- * To probe the Sandpoint type, we need to check for a connection between GPIO
- * pins 6 and 7 on the NS87308 SuperIO.
- */
-static void __init sandpoint_probe_type(void)
-{
-	u8 x;
-	/* First, ensure that the GPIO pins are enabled. */
-	SANDPOINT_87308_SELECT_DEV(0x07); /* Select GPIO logical device */
-	SANDPOINT_87308_CFG_OUTB(0x60, 0x07); /* Base address 0x700 */
-	SANDPOINT_87308_CFG_OUTB(0x61, 0x00);
-	SANDPOINT_87308_CFG_OUTB(0x30, 0x01); /* Enable */
-
-	/* Now, set pin 7 to output and pin 6 to input. */
-	outb((inb(0x701) | 0x80) & 0xbf, 0x701);
-	/* Set push-pull output */
-	outb(inb(0x702) | 0x80, 0x702);
-	/* Set pull-up on input */
-	outb(inb(0x703) | 0x40, 0x703);
-	/* Set output high and check */
-	x = inb(0x700);
-	outb(x | 0x80, 0x700);
-	x = inb(0x700);
-	sandpoint_is_x2 = ! (x & 0x40);
-	if (ppc_md.progress && sandpoint_is_x2)
-		ppc_md.progress("High output says X2", 0);
-	/* Set output low and check */
-	outb(x & 0x7f, 0x700);
-	sandpoint_is_x2 |= inb(0x700) & 0x40;
-	if (ppc_md.progress && sandpoint_is_x2)
-		ppc_md.progress("Low output says X2", 0);
-	if (ppc_md.progress && ! sandpoint_is_x2)
-		ppc_md.progress("Sandpoint is X3", 0);
-}
-
-/*
- * Fix IDE interrupts.
- */
-static int __init
-sandpoint_fix_winbond_83553(void)
-{
-	/* Make some 8259 interrupt level sensitive */
-	outb(0xe0, 0x4d0);
-	outb(0xde, 0x4d1);
-
-	return 0;
-}
-
-arch_initcall(sandpoint_fix_winbond_83553);
-
-/*
- * Initialize the ISA devices on the Nat'l PC87308VUL SuperIO chip.
- */
-static int __init
-sandpoint_setup_natl_87308(void)
-{
-	u_char	reg;
-
-	/*
-	 * Enable all the devices on the Super I/O chip.
-	 */
-	SANDPOINT_87308_SELECT_DEV(0x00); /* Select kbd logical device */
-	SANDPOINT_87308_CFG_OUTB(0xf0, 0x00); /* Set KBC clock to 8 Mhz */
-	SANDPOINT_87308_DEV_ENABLE(0x00); /* Enable keyboard */
-	SANDPOINT_87308_DEV_ENABLE(0x01); /* Enable mouse */
-	SANDPOINT_87308_DEV_ENABLE(0x02); /* Enable rtc */
-	SANDPOINT_87308_DEV_ENABLE(0x03); /* Enable fdc (floppy) */
-	SANDPOINT_87308_DEV_ENABLE(0x04); /* Enable parallel */
-	SANDPOINT_87308_DEV_ENABLE(0x05); /* Enable UART 2 */
-	SANDPOINT_87308_CFG_OUTB(0xf0, 0x82); /* Enable bank select regs */
-	SANDPOINT_87308_DEV_ENABLE(0x06); /* Enable UART 1 */
-	SANDPOINT_87308_CFG_OUTB(0xf0, 0x82); /* Enable bank select regs */
-
-	/* Set up floppy in PS/2 mode */
-	outb(0x09, SIO_CONFIG_RA);
-	reg = inb(SIO_CONFIG_RD);
-	reg = (reg & 0x3F) | 0x40;
-	outb(reg, SIO_CONFIG_RD);
-	outb(reg, SIO_CONFIG_RD);	/* Have to write twice to change! */
-
-	return 0;
-}
-
-arch_initcall(sandpoint_setup_natl_87308);
-
-static int __init
-sandpoint_request_io(void)
-{
-	request_region(0x00,0x20,"dma1");
-	request_region(0x20,0x20,"pic1");
-	request_region(0x40,0x20,"timer");
-	request_region(0x80,0x10,"dma page reg");
-	request_region(0xa0,0x20,"pic2");
-	request_region(0xc0,0x20,"dma2");
-
-	return 0;
-}
-
-arch_initcall(sandpoint_request_io);
-
-/*
- * Interrupt setup and service.  Interrupts on the Sandpoint come
- * from the four PCI slots plus the 8259 in the Winbond Super I/O (SIO).
- * The 8259 is cascaded from EPIC IRQ0, IRQ1-4 map to PCI slots 1-4,
- * IDE is on EPIC 7 and 8.
- */
-static void __init
-sandpoint_init_IRQ(void)
-{
-	int i;
-
-	OpenPIC_InitSenses = sandpoint_openpic_initsenses;
-	OpenPIC_NumInitSenses = sizeof(sandpoint_openpic_initsenses);
-
-	mpc10x_set_openpic();
-	openpic_hookup_cascade(sandpoint_is_x2 ? 17 : NUM_8259_INTERRUPTS, "82c59 cascade",
-			i8259_irq);
-
-	/*
-	 * The EPIC allows for a read in the range of 0xFEF00000 ->
-	 * 0xFEFFFFFF to generate a PCI interrupt-acknowledge transaction.
-	 */
-	i8259_init(0xfef00000, 0);
-}
-
-static unsigned long __init
-sandpoint_find_end_of_memory(void)
-{
-	bd_t *bp = (bd_t *)__res;
-
-	if (bp->bi_memsize)
-		return bp->bi_memsize;
-
-	/* DINK32 13.0 correctly initializes things, so iff you use
-	 * this you _should_ be able to change this instead of a
-	 * hardcoded value. */
-#if 0
-	return mpc10x_get_mem_size(MPC10X_MEM_MAP_B);
-#else
-	return 32*1024*1024;
-#endif
-}
-
-static void __init
-sandpoint_map_io(void)
-{
-	io_block_mapping(0xfe000000, 0xfe000000, 0x02000000, _PAGE_IO);
-}
-
-static void
-sandpoint_restart(char *cmd)
-{
-	local_irq_disable();
-
-	/* Set exception prefix high - to the firmware */
-	_nmask_and_or_msr(0, MSR_IP);
-
-	/* Reset system via Port 92 */
-	outb(0x00, 0x92);
-	outb(0x01, 0x92);
-	for(;;);	/* Spin until reset happens */
-}
-
-static void
-sandpoint_power_off(void)
-{
-	local_irq_disable();
-	for(;;);	/* No way to shut power off with software */
-	/* NOTREACHED */
-}
-
-static void
-sandpoint_halt(void)
-{
-	sandpoint_power_off();
-	/* NOTREACHED */
-}
-
-static int
-sandpoint_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: Motorola SPS\n");
-	seq_printf(m, "machine\t\t: Sandpoint\n");
-
-	return 0;
-}
-
-/*
- * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1.
- */
-static __inline__ void
-sandpoint_set_bat(void)
-{
-	unsigned long bat3u, bat3l;
-
-	__asm__ __volatile__(
-			" lis %0,0xf800\n	\
-			ori %1,%0,0x002a\n	\
-			ori %0,%0,0x0ffe\n	\
-			mtspr 0x21e,%0\n	\
-			mtspr 0x21f,%1\n	\
-			isync\n			\
-			sync "
-			: "=r" (bat3u), "=r" (bat3l));
-}
-
-TODC_ALLOC();
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-		unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* ASSUMPTION:  If both r3 (bd_t pointer) and r6 (cmdline pointer)
-	 * are non-zero, then we should use the board info from the bd_t
-	 * structure and the cmdline pointed to by r6 instead of the
-	 * information from birecs, if any.  Otherwise, use the information
-	 * from birecs as discovered by the preceding call to
-	 * parse_bootinfo().  This rule should work with both PPCBoot, which
-	 * uses a bd_t board info structure, and the kernel boot wrapper,
-	 * which uses birecs.
-	 */
-	if (r3 && r6) {
-		/* copy board info structure */
-		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
-		/* copy command line */
-		*(char *)(r7+KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6+KERNELBASE));
-	}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-
-	/* Map in board regs, etc. */
-	sandpoint_set_bat();
-
-	isa_io_base = MPC10X_MAPB_ISA_IO_BASE;
-	isa_mem_base = MPC10X_MAPB_ISA_MEM_BASE;
-	pci_dram_offset = MPC10X_MAPB_DRAM_OFFSET;
-	ISA_DMA_THRESHOLD = 0x00ffffff;
-	DMA_MODE_READ = 0x44;
-	DMA_MODE_WRITE = 0x48;
-	ppc_do_canonicalize_irqs = 1;
-
-	ppc_md.setup_arch = sandpoint_setup_arch;
-	ppc_md.show_cpuinfo = sandpoint_show_cpuinfo;
-	ppc_md.init_IRQ = sandpoint_init_IRQ;
-	ppc_md.get_irq = openpic_get_irq;
-
-	ppc_md.restart = sandpoint_restart;
-	ppc_md.power_off = sandpoint_power_off;
-	ppc_md.halt = sandpoint_halt;
-
-	ppc_md.find_end_of_memory = sandpoint_find_end_of_memory;
-	ppc_md.setup_io_mappings = sandpoint_map_io;
-
-	TODC_INIT(TODC_TYPE_PC97307, 0x70, 0x00, 0x71, 8);
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = todc_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_mc146818_read_val;
-	ppc_md.nvram_write_val = todc_mc146818_write_val;
-
-#ifdef CONFIG_KGDB
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif
-}
diff --git a/arch/ppc/platforms/sandpoint.h b/arch/ppc/platforms/sandpoint.h
deleted file mode 100644
index ed83759e4044..000000000000
--- a/arch/ppc/platforms/sandpoint.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Definitions for Motorola SPS Sandpoint Test Platform
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2000-2003 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * Sandpoint uses the CHRP map (Map B).
- */
-
-#ifndef __PPC_PLATFORMS_SANDPOINT_H
-#define __PPC_PLATFORMS_SANDPOINT_H
-
-#include <asm/ppcboot.h>
-
-#if 0
-/* The Sandpoint X3 allows the IDE interrupt to be directly connected
- * from the Windbond (PCI INTC or INTD) to the serial EPIC.  Someday
- * we should try this, but it was easier to use the existing 83c553
- * initialization than change it to route the different interrupts :-).
- *	-- Dan
- */
-#define SANDPOINT_IDE_INT0		23	/* EPIC 7 */
-#define SANDPOINT_IDE_INT1		24	/* EPIC 8 */
-#endif
-
-/*
- * The sandpoint boards have processor modules that either have an 8240 or
- * an MPC107 host bridge on them.  These bridges have an IDSEL line that allows
- * them to respond to PCI transactions as if they were a normal PCI devices.
- * However, the processor on the processor side of the bridge can not reach
- * out onto the PCI bus and then select the bridge or bad things will happen
- * (documented in the 8240 and 107 manuals).
- * Because of this, we always skip the bridge PCI device when accessing the
- * PCI bus.  The PCI slot that the bridge occupies is defined by the macro
- * below.
- */
-#define SANDPOINT_HOST_BRIDGE_IDSEL     12
-
-/*
- * Serial defines.
- */
-#define SANDPOINT_SERIAL_0		0xfe0003f8
-#define SANDPOINT_SERIAL_1		0xfe0002f8
-
-#define RS_TABLE_SIZE  2
-
-/* Rate for the 1.8432 Mhz clock for the onboard serial chip */
-#define BASE_BAUD			( 1843200 / 16 )
-#define UART_CLK			1843200
-
-#ifdef CONFIG_SERIAL_DETECT_IRQ
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_AUTO_IRQ)
-#else
-#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF)
-#endif
-
-#define STD_SERIAL_PORT_DFNS \
-        { 0, BASE_BAUD, SANDPOINT_SERIAL_0, 4, STD_COM_FLAGS, /* ttyS0 */ \
-		iomem_base: (u8 *)SANDPOINT_SERIAL_0,			  \
-		io_type: SERIAL_IO_MEM },				  \
-        { 0, BASE_BAUD, SANDPOINT_SERIAL_1, 3, STD_COM_FLAGS, /* ttyS1 */ \
-		iomem_base: (u8 *)SANDPOINT_SERIAL_1,			  \
-		io_type: SERIAL_IO_MEM },
-
-#define SERIAL_PORT_DFNS \
-        STD_SERIAL_PORT_DFNS
-
-#endif /* __PPC_PLATFORMS_SANDPOINT_H */
diff --git a/arch/ppc/platforms/sbc82xx.c b/arch/ppc/platforms/sbc82xx.c
deleted file mode 100644
index 24f6e0694ac1..000000000000
--- a/arch/ppc/platforms/sbc82xx.c
+++ /dev/null
@@ -1,256 +0,0 @@
-/*
- * SBC82XX platform support
- *
- * Author: Guy Streeter <streeter@redhat.com>
- *
- * Derived from: est8260_setup.c by Allen Curtis, ONZ
- *
- * Copyright 2004 Red Hat, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/stddef.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/mpc8260.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/todc.h>
-#include <asm/immap_cpm2.h>
-#include <asm/pci.h>
-
-static void (*callback_init_IRQ)(void);
-
-extern unsigned char __res[sizeof(bd_t)];
-
-#ifdef CONFIG_GEN_RTC
-TODC_ALLOC();
-
-/*
- * Timer init happens before mem_init but after paging init, so we cannot
- * directly use ioremap() at that time.
- * late_time_init() is call after paging init.
- */
-
-static void sbc82xx_time_init(void)
-{
-	volatile memctl_cpm2_t *mc = &cpm2_immr->im_memctl;
-
-	/* Set up CS11 for RTC chip */
-	mc->memc_br11=0;
-	mc->memc_or11=0xffff0836;
-	mc->memc_br11=SBC82xx_TODC_NVRAM_ADDR | 0x0801;
-
-	TODC_INIT(TODC_TYPE_MK48T59, 0, 0, SBC82xx_TODC_NVRAM_ADDR, 0);
-
-	todc_info->nvram_data =
-		(unsigned int)ioremap(todc_info->nvram_data, 0x2000);
-	BUG_ON(!todc_info->nvram_data);
-	ppc_md.get_rtc_time	= todc_get_rtc_time;
-	ppc_md.set_rtc_time	= todc_set_rtc_time;
-	ppc_md.nvram_read_val	= todc_direct_read_val;
-	ppc_md.nvram_write_val	= todc_direct_write_val;
-	todc_time_init();
-}
-#endif /* CONFIG_GEN_RTC */
-
-static volatile char *sbc82xx_i8259_map;
-static char sbc82xx_i8259_mask = 0xff;
-static DEFINE_SPINLOCK(sbc82xx_i8259_lock);
-
-static void sbc82xx_i8259_mask_and_ack_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	irq_nr -= NR_SIU_INTS;
-
-	spin_lock_irqsave(&sbc82xx_i8259_lock, flags);
-	sbc82xx_i8259_mask |= 1 << irq_nr;
-	(void) sbc82xx_i8259_map[1];	/* Dummy read */
-	sbc82xx_i8259_map[1] = sbc82xx_i8259_mask;
-	sbc82xx_i8259_map[0] = 0x20;	/* OCW2: Non-specific EOI */
-	spin_unlock_irqrestore(&sbc82xx_i8259_lock, flags);
-}
-
-static void sbc82xx_i8259_mask_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	irq_nr -= NR_SIU_INTS;
-
-	spin_lock_irqsave(&sbc82xx_i8259_lock, flags);
-	sbc82xx_i8259_mask |= 1 << irq_nr;
-	sbc82xx_i8259_map[1] = sbc82xx_i8259_mask;
-	spin_unlock_irqrestore(&sbc82xx_i8259_lock, flags);
-}
-
-static void sbc82xx_i8259_unmask_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	irq_nr -= NR_SIU_INTS;
-
-	spin_lock_irqsave(&sbc82xx_i8259_lock, flags);
-	sbc82xx_i8259_mask &= ~(1 << irq_nr);
-	sbc82xx_i8259_map[1] = sbc82xx_i8259_mask;
-	spin_unlock_irqrestore(&sbc82xx_i8259_lock, flags);
-}
-
-static void sbc82xx_i8259_end_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-	    && irq_desc[irq].action)
-		sbc82xx_i8259_unmask_irq(irq);
-}
-
-
-struct hw_interrupt_type sbc82xx_i8259_ic = {
-	.typename = " i8259     ",
-	.enable = sbc82xx_i8259_unmask_irq,
-	.disable = sbc82xx_i8259_mask_irq,
-	.ack = sbc82xx_i8259_mask_and_ack_irq,
-	.end = sbc82xx_i8259_end_irq,
-};
-
-static irqreturn_t sbc82xx_i8259_demux(int dummy, void *dev_id)
-{
-	int irq;
-
-	spin_lock(&sbc82xx_i8259_lock);
-
-	sbc82xx_i8259_map[0] = 0x0c;	/* OCW3: Read IR register on RD# pulse */
-	irq = sbc82xx_i8259_map[0] & 7;	/* Read IRR */
-
-	if (irq == 7) {
-		/* Possible spurious interrupt */
-		int isr;
-		sbc82xx_i8259_map[0] = 0x0b;	/* OCW3: Read IS register on RD# pulse */
-		isr = sbc82xx_i8259_map[0];	/* Read ISR */
-
-		if (!(isr & 0x80)) {
-			printk(KERN_INFO "Spurious i8259 interrupt\n");
-			return IRQ_HANDLED;
-		}
-	}
-	__do_IRQ(NR_SIU_INTS + irq);
-	return IRQ_HANDLED;
-}
-
-static struct irqaction sbc82xx_i8259_irqaction = {
-	.handler = sbc82xx_i8259_demux,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "i8259 demux",
-};
-
-void __init sbc82xx_init_IRQ(void)
-{
-	volatile memctl_cpm2_t *mc = &cpm2_immr->im_memctl;
-	volatile intctl_cpm2_t *ic = &cpm2_immr->im_intctl;
-	int i;
-
-	callback_init_IRQ();
-
-	/* u-boot doesn't always set the board up correctly */
-	mc->memc_br5 = 0;
-	mc->memc_or5 = 0xfff00856;
-	mc->memc_br5 = 0x22000801;
-
-	sbc82xx_i8259_map = ioremap(0x22008000, 2);
-	if (!sbc82xx_i8259_map) {
-		printk(KERN_CRIT "Mapping i8259 interrupt controller failed\n");
-		return;
-	}
-	
-	/* Set up the interrupt handlers for the i8259 IRQs */
-	for (i = NR_SIU_INTS; i < NR_SIU_INTS + 8; i++) {
-                irq_desc[i].chip = &sbc82xx_i8259_ic;
-		irq_desc[i].status |= IRQ_LEVEL;
-	}
-
-	/* make IRQ6 level sensitive */
-	ic->ic_siexr &= ~(1 << (14 - (SIU_INT_IRQ6 - SIU_INT_IRQ1)));
-	irq_desc[SIU_INT_IRQ6].status |= IRQ_LEVEL;
-
-	/* Initialise the i8259 */
-	sbc82xx_i8259_map[0] = 0x1b;	/* ICW1: Level, no cascade, ICW4 */
-	sbc82xx_i8259_map[1] = 0x00;	/* ICW2: vector base */
-					/* No ICW3 (no cascade) */
-	sbc82xx_i8259_map[1] = 0x01;	/* ICW4: 8086 mode, normal EOI */
-
-	sbc82xx_i8259_map[0] = 0x0b;	/* OCW3: Read IS register on RD# pulse */
-
-	sbc82xx_i8259_map[1] = sbc82xx_i8259_mask; /* Set interrupt mask */
-
-	/* Request cascade IRQ */
-	if (setup_irq(SIU_INT_IRQ6, &sbc82xx_i8259_irqaction)) {
-		printk("Installation of i8259 IRQ demultiplexer failed.\n");
-	}
-}
-
-static int sbc82xx_pci_map_irq(struct pci_dev *dev, unsigned char idsel,
-			       unsigned char pin)
-{
-	static char pci_irq_table[][4] = {
-		/*
-		 * PCI IDSEL/INTPIN->INTLINE
-		 *  A      B      C      D
-		 */
-		{ SBC82xx_PIRQA, SBC82xx_PIRQB, SBC82xx_PIRQC, SBC82xx_PIRQD },	/* IDSEL 16 - PMC slot */
-		{ SBC82xx_PC_IRQA, SBC82xx_PC_IRQB, -1,  -1  },			/* IDSEL 17 - CardBus */
-		{ SBC82xx_PIRQA, SBC82xx_PIRQB, SBC82xx_PIRQC, SBC82xx_PIRQD }, /* IDSEL 18 - PCI-X bridge */
-	};
-
-	const long min_idsel = 16, max_idsel = 18, irqs_per_slot = 4;
-
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __devinit quirk_sbc8260_cardbus(struct pci_dev *pdev)
-{
-	uint32_t ctrl;
-
-	if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(17, 0))
-		return;
-
-	printk(KERN_INFO "Setting up CardBus controller\n");
-
-	/* Set P2CCLK bit in System Control Register */
-	pci_read_config_dword(pdev, 0x80, &ctrl);
-	ctrl |= (1<<27);
-	pci_write_config_dword(pdev, 0x80, ctrl);
-
-	/* Set MFUNC up for PCI IRQ routing via INTA and INTB, and LEDs. */
-	pci_write_config_dword(pdev, 0x8c, 0x00c01d22);
-
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1420, quirk_sbc8260_cardbus);
-
-void __init
-m82xx_board_init(void)
-{
-	/* u-boot may be using one of the FCC Ethernet devices.
-	   Use the MAC address to the SCC. */
-	__res[offsetof(bd_t, bi_enetaddr[5])] &= ~3;
-
-	/* Anything special for this platform */
-	callback_init_IRQ	= ppc_md.init_IRQ;
-
-	ppc_md.init_IRQ		= sbc82xx_init_IRQ;
-	ppc_md.pci_map_irq	= sbc82xx_pci_map_irq;
-#ifdef CONFIG_GEN_RTC
-	ppc_md.time_init        = NULL;
-	ppc_md.get_rtc_time     = NULL;
-	ppc_md.set_rtc_time     = NULL;
-	ppc_md.nvram_read_val   = NULL;
-	ppc_md.nvram_write_val  = NULL;
-	late_time_init		= sbc82xx_time_init;
-#endif /* CONFIG_GEN_RTC */
-}
diff --git a/arch/ppc/platforms/sbc82xx.h b/arch/ppc/platforms/sbc82xx.h
deleted file mode 100644
index e4042d4995f6..000000000000
--- a/arch/ppc/platforms/sbc82xx.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Board information for the SBCPowerQUICCII, which should be generic for
- * all 8260 boards.  The IMMR is now given to us so the hard define
- * will soon be removed.  All of the clock values are computed from
- * the configuration SCMR and the Power-On-Reset word.
- */
-
-#ifndef __PPC_SBC82xx_H__
-#define __PPC_SBC82xx_H__
-
-#include <asm/ppcboot.h>
-
-#define CPM_MAP_ADDR			0xf0000000
-
-#define SBC82xx_TODC_NVRAM_ADDR		0xd0000000
-
-#define SBC82xx_MACADDR_NVRAM_FCC1	0x220000c9	/* JP6B */
-#define SBC82xx_MACADDR_NVRAM_SCC1	0x220000cf	/* JP6A */
-#define SBC82xx_MACADDR_NVRAM_FCC2	0x220000d5	/* JP7A */
-#define SBC82xx_MACADDR_NVRAM_FCC3	0x220000db	/* JP7B */
-
-/* For our show_cpuinfo hooks. */
-#define CPUINFO_VENDOR		"Wind River"
-#define CPUINFO_MACHINE		"SBC PowerQUICC II"
-
-#define BOOTROM_RESTART_ADDR      ((uint)0x40000104)
-
-#define SBC82xx_PC_IRQA (NR_SIU_INTS+0)
-#define SBC82xx_PC_IRQB (NR_SIU_INTS+1)
-#define SBC82xx_MPC185_IRQ (NR_SIU_INTS+2)
-#define SBC82xx_ATM_IRQ (NR_SIU_INTS+3)
-#define SBC82xx_PIRQA (NR_SIU_INTS+4)
-#define SBC82xx_PIRQB (NR_SIU_INTS+5)
-#define SBC82xx_PIRQC (NR_SIU_INTS+6)
-#define SBC82xx_PIRQD (NR_SIU_INTS+7)
-
-#endif /* __PPC_SBC82xx_H__ */
diff --git a/arch/ppc/platforms/sbs8260.h b/arch/ppc/platforms/sbs8260.h
deleted file mode 100644
index d51427a0f0d4..000000000000
--- a/arch/ppc/platforms/sbs8260.h
+++ /dev/null
@@ -1,28 +0,0 @@
-#ifndef __ASSEMBLY__
-/* Board information for various SBS 8260 cards, which should be generic for
- * all 8260 boards.  The IMMR is now given to us so the hard define
- * will soon be removed.  All of the clock values are computed from
- * the configuration SCMR and the Power-On-Reset word.
- */
-
-#define CPM_MAP_ADDR	((uint)0xfe000000)
-
-
-/* A Board Information structure that is given to a program when
- * prom starts it up.
- */
-typedef struct bd_info {
-	unsigned int	bi_memstart;	/* Memory start address */
-	unsigned int	bi_memsize;	/* Memory (end) size in bytes */
-	unsigned int	bi_intfreq;	/* Internal Freq, in Hz */
-	unsigned int	bi_busfreq;	/* Bus Freq, in MHz */
-	unsigned int	bi_cpmfreq;	/* CPM Freq, in MHz */
-	unsigned int	bi_brgfreq;	/* BRG Freq, in MHz */
-	unsigned int	bi_vco;		/* VCO Out from PLL */
-	unsigned int	bi_baudrate;	/* Default console baud rate */
-	unsigned int	bi_immr;	/* IMMR when called from boot rom */
-	unsigned char	bi_enetaddr[6];
-} bd_t;
-
-extern bd_t m8xx_board_info;
-#endif /* !__ASSEMBLY__ */
diff --git a/arch/ppc/platforms/spruce.c b/arch/ppc/platforms/spruce.c
deleted file mode 100644
index a344134f14b8..000000000000
--- a/arch/ppc/platforms/spruce.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * Board and PCI setup routines for IBM Spruce
- *
- * Author: MontaVista Software <source@mvista.com>
- *
- * 2000-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/reboot.h>
-#include <linux/pci.h>
-#include <linux/kdev_t.h>
-#include <linux/types.h>
-#include <linux/major.h>
-#include <linux/initrd.h>
-#include <linux/console.h>
-#include <linux/delay.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-#include <linux/serial.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/dma.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/bootinfo.h>
-#include <asm/kgdb.h>
-
-#include <syslib/cpc700.h>
-
-#include "spruce.h"
-
-static inline int
-spruce_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-		/*
-		 * 	PCI IDSEL/INTPIN->INTLINE
-		 * 	A	B	C	D
-		 */
-	{
-		{23, 24, 25, 26},	/* IDSEL 1 - PCI slot 3 */
-		{24, 25, 26, 23},	/* IDSEL 2 - PCI slot 2 */
-		{25, 26, 23, 24},	/* IDSEL 3 - PCI slot 1 */
-		{26, 23, 24, 25},	/* IDSEL 4 - PCI slot 0 */
-	};
-
-	const long min_idsel = 1, max_idsel = 4, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void __init
-spruce_setup_hose(void)
-{
-	struct pci_controller *hose;
-
-	/* Setup hose */
-	hose = pcibios_alloc_controller();
-	if (!hose)
-		return;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-
-	pci_init_resource(&hose->io_resource,
-			SPRUCE_PCI_LOWER_IO,
-			SPRUCE_PCI_UPPER_IO,
-			IORESOURCE_IO,
-			"PCI host bridge");
-
-	pci_init_resource(&hose->mem_resources[0],
-			SPRUCE_PCI_LOWER_MEM,
-			SPRUCE_PCI_UPPER_MEM,
-			IORESOURCE_MEM,
-			"PCI host bridge");
-
-	hose->io_space.start = SPRUCE_PCI_LOWER_IO;
-	hose->io_space.end = SPRUCE_PCI_UPPER_IO;
-	hose->mem_space.start = SPRUCE_PCI_LOWER_MEM;
-	hose->mem_space.end = SPRUCE_PCI_UPPER_MEM;
-	hose->io_base_virt = (void *)SPRUCE_ISA_IO_BASE;
-
-	setup_indirect_pci(hose,
-			SPRUCE_PCI_CONFIG_ADDR,
-			SPRUCE_PCI_CONFIG_DATA);
-
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = spruce_map_irq;
-}
-
-/*
- * CPC700 PIC interrupt programming table
- *
- * First entry is the sensitivity (level/edge), second is the polarity.
- */
-unsigned int cpc700_irq_assigns[32][2] = {
-	{ 1, 1 },       /* IRQ  0: ECC Correctable Error - rising edge */
-	{ 1, 1 },       /* IRQ  1: PCI Write Mem Range   - rising edge */
-	{ 0, 1 },       /* IRQ  2: PCI Write Command Reg - active high */
-	{ 0, 1 },       /* IRQ  3: UART 0                - active high */
-	{ 0, 1 },       /* IRQ  4: UART 1                - active high */
-	{ 0, 1 },       /* IRQ  5: ICC 0                 - active high */
-	{ 0, 1 },       /* IRQ  6: ICC 1                 - active high */
-	{ 0, 1 },       /* IRQ  7: GPT Compare 0         - active high */
-	{ 0, 1 },       /* IRQ  8: GPT Compare 1         - active high */
-	{ 0, 1 },       /* IRQ  9: GPT Compare 2         - active high */
-	{ 0, 1 },       /* IRQ 10: GPT Compare 3         - active high */
-	{ 0, 1 },       /* IRQ 11: GPT Compare 4         - active high */
-	{ 0, 1 },       /* IRQ 12: GPT Capture 0         - active high */
-	{ 0, 1 },       /* IRQ 13: GPT Capture 1         - active high */
-	{ 0, 1 },       /* IRQ 14: GPT Capture 2         - active high */
-	{ 0, 1 },       /* IRQ 15: GPT Capture 3         - active high */
-	{ 0, 1 },       /* IRQ 16: GPT Capture 4         - active high */
-	{ 0, 0 },       /* IRQ 17: Reserved */
-	{ 0, 0 },       /* IRQ 18: Reserved */
-	{ 0, 0 },       /* IRQ 19: Reserved */
-	{ 0, 1 },       /* IRQ 20: FPGA EXT_IRQ0         - active high */
-	{ 1, 1 },       /* IRQ 21: Mouse                 - rising edge */
-	{ 1, 1 },       /* IRQ 22: Keyboard              - rising edge */
-	{ 0, 0 },       /* IRQ 23: PCI Slot 3            - active low */
-	{ 0, 0 },       /* IRQ 24: PCI Slot 2            - active low */
-	{ 0, 0 },       /* IRQ 25: PCI Slot 1            - active low */
-	{ 0, 0 },       /* IRQ 26: PCI Slot 0            - active low */
-};
-
-static void __init
-spruce_calibrate_decr(void)
-{
-	int freq, divisor = 4;
-
-	/* determine processor bus speed */
-	freq = SPRUCE_BUS_SPEED;
-	tb_ticks_per_jiffy = freq / HZ / divisor;
-	tb_to_us = mulhwu_scale_factor(freq/divisor, 1000000);
-}
-
-static int
-spruce_show_cpuinfo(struct seq_file *m)
-{
-	seq_printf(m, "vendor\t\t: IBM\n");
-	seq_printf(m, "machine\t\t: Spruce\n");
-
-	return 0;
-}
-
-static void __init
-spruce_early_serial_map(void)
-{
-	u32 uart_clk;
-	struct uart_port serial_req;
-
-	if (SPRUCE_UARTCLK_IS_33M(readb(SPRUCE_FPGA_REG_A)))
-		uart_clk = SPRUCE_BAUD_33M * 16;
-	else
-		uart_clk = SPRUCE_BAUD_30M * 16;
-
-	/* Setup serial port access */
-	memset(&serial_req, 0, sizeof(serial_req));
-	serial_req.uartclk = uart_clk;
-	serial_req.irq = UART0_INT;
-	serial_req.flags = UPF_BOOT_AUTOCONF;
-	serial_req.iotype = UPIO_MEM;
-	serial_req.membase = (u_char *)UART0_IO_BASE;
-	serial_req.regshift = 0;
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG)
-	gen550_init(0, &serial_req);
-#endif
-#ifdef CONFIG_SERIAL_8250
-	if (early_serial_setup(&serial_req) != 0)
-		printk("Early serial init of port 0 failed\n");
-#endif
-
-	/* Assume early_serial_setup() doesn't modify serial_req */
-	serial_req.line = 1;
-	serial_req.irq = UART1_INT;
-	serial_req.membase = (u_char *)UART1_IO_BASE;
-
-#if defined(CONFIG_KGDB) || defined(CONFIG_SERIAL_TEXT_DEBUG)
-	gen550_init(1, &serial_req);
-#endif
-#ifdef CONFIG_SERIAL_8250
-	if (early_serial_setup(&serial_req) != 0)
-		printk("Early serial init of port 1 failed\n");
-#endif
-}
-
-TODC_ALLOC();
-
-static void __init
-spruce_setup_arch(void)
-{
-	/* Setup TODC access */
-	TODC_INIT(TODC_TYPE_DS1643, 0, 0, SPRUCE_RTC_BASE_ADDR, 8);
-
-	/* init to some ~sane value until calibrate_delay() runs */
-	loops_per_jiffy = 50000000 / HZ;
-
-	/* Setup PCI host bridge */
-	spruce_setup_hose();
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-	else
-#endif
-#ifdef CONFIG_ROOT_NFS
-		ROOT_DEV = Root_NFS;
-#else
-		ROOT_DEV = Root_SDA1;
-#endif
-
-	/* Identify the system */
-	printk(KERN_INFO "System Identification: IBM Spruce\n");
-	printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n");
-}
-
-static void
-spruce_restart(char *cmd)
-{
-	local_irq_disable();
-
-	/* SRR0 has system reset vector, SRR1 has default MSR value */
-	/* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
-	__asm__ __volatile__
-	("\n\
-	lis	3,0xfff0	\n\
-	ori	3,3,0x0100	\n\
-	mtspr	26,3		\n\
-	li	3,0		\n\
-	mtspr	27,3		\n\
-	rfi			\n\
-	");
-	for(;;);
-}
-
-static void
-spruce_power_off(void)
-{
-	for(;;);
-}
-
-static void
-spruce_halt(void)
-{
-	spruce_restart(NULL);
-}
-
-static void __init
-spruce_map_io(void)
-{
-	io_block_mapping(SPRUCE_PCI_IO_BASE, SPRUCE_PCI_PHY_IO_BASE,
-			 0x08000000, _PAGE_IO);
-}
-
-/*
- * Set BAT 3 to map 0xf8000000 to end of physical memory space 1-to-1.
- */
-static __inline__ void
-spruce_set_bat(void)
-{
-	mb();
-	mtspr(SPRN_DBAT1U, 0xf8000ffe);
-	mtspr(SPRN_DBAT1L, 0xf800002a);
-	mb();
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/* Map in board regs, etc. */
-	spruce_set_bat();
-
-	isa_io_base = SPRUCE_ISA_IO_BASE;
-	pci_dram_offset = SPRUCE_PCI_SYS_MEM_BASE;
-
-	ppc_md.setup_arch = spruce_setup_arch;
-	ppc_md.show_cpuinfo = spruce_show_cpuinfo;
-	ppc_md.init_IRQ = cpc700_init_IRQ;
-	ppc_md.get_irq = cpc700_get_irq;
-
-	ppc_md.setup_io_mappings = spruce_map_io;
-
-	ppc_md.restart = spruce_restart;
-	ppc_md.power_off = spruce_power_off;
-	ppc_md.halt = spruce_halt;
-
-	ppc_md.time_init = todc_time_init;
-	ppc_md.set_rtc_time = todc_set_rtc_time;
-	ppc_md.get_rtc_time = todc_get_rtc_time;
-	ppc_md.calibrate_decr = spruce_calibrate_decr;
-
-	ppc_md.nvram_read_val = todc_direct_read_val;
-	ppc_md.nvram_write_val = todc_direct_write_val;
-
-	spruce_early_serial_map();
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
-#ifdef CONFIG_KGDB
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-}
diff --git a/arch/ppc/platforms/spruce.h b/arch/ppc/platforms/spruce.h
deleted file mode 100644
index f1f96f1de72a..000000000000
--- a/arch/ppc/platforms/spruce.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * arch/ppc/platforms/spruce.h
- *
- * Definitions for IBM Spruce reference board support
- *
- * Authors: Matt Porter and Johnnie Peters
- *          mporter@mvista.com
- *          jpeters@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_SPRUCE_H__
-#define __ASM_SPRUCE_H__
-
-#define SPRUCE_PCI_CONFIG_ADDR	0xfec00000
-#define SPRUCE_PCI_CONFIG_DATA	0xfec00004
-
-#define SPRUCE_PCI_PHY_IO_BASE	0xf8000000
-#define SPRUCE_PCI_IO_BASE	SPRUCE_PCI_PHY_IO_BASE
-
-#define SPRUCE_PCI_SYS_MEM_BASE	0x00000000
-
-#define SPRUCE_PCI_LOWER_MEM	0x80000000
-#define SPRUCE_PCI_UPPER_MEM	0x9fffffff
-#define SPRUCE_PCI_LOWER_IO	0x00000000
-#define SPRUCE_PCI_UPPER_IO	0x03ffffff
-
-#define	SPRUCE_ISA_IO_BASE	SPRUCE_PCI_IO_BASE
-
-#define SPRUCE_MEM_SIZE		0x04000000
-#define SPRUCE_BUS_SPEED	66666667
-
-#define SPRUCE_NVRAM_BASE_ADDR	0xff800000
-#define SPRUCE_RTC_BASE_ADDR	SPRUCE_NVRAM_BASE_ADDR
-
-/*
- * Serial port defines
- */
-#define SPRUCE_FPGA_REG_A	0xff820000
-#define SPRUCE_UARTCLK_33M	0x02
-#define SPRUCE_UARTCLK_IS_33M(reg)	(reg & SPRUCE_UARTCLK_33M)
-
-#define UART0_IO_BASE	0xff600300
-#define UART1_IO_BASE	0xff600400
-
-#define RS_TABLE_SIZE	2
-
-#define SPRUCE_BAUD_33M	(33000000/64)
-#define SPRUCE_BAUD_30M	(30000000/64)
-#define BASE_BAUD	SPRUCE_BAUD_33M
-
-#define UART0_INT	3
-#define UART1_INT	4
-
-#define STD_UART_OP(num)						\
-	{ 0, BASE_BAUD, 0, UART##num##_INT,				\
-		ASYNC_BOOT_AUTOCONF,					\
-		iomem_base: (unsigned char *) UART##num##_IO_BASE,	\
-		io_type: SERIAL_IO_MEM},
-
-#define SERIAL_PORT_DFNS	\
-	STD_UART_OP(0)		\
-	STD_UART_OP(1)
-
-#endif /* __ASM_SPRUCE_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/tqm8260.h b/arch/ppc/platforms/tqm8260.h
deleted file mode 100644
index 7f8c9a6928f8..000000000000
--- a/arch/ppc/platforms/tqm8260.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * TQM8260 board specific definitions
- *
- * Copyright (c) 2001 Wolfgang Denk (wd@denx.de)
- */
-
-#ifndef __TQM8260_PLATFORM
-#define __TQM8260_PLATFORM
-
-
-#include <asm/ppcboot.h>
-
-#define CPM_MAP_ADDR		((uint)0xFFF00000)
-#define PHY_INTERRUPT		25
-
-/* For our show_cpuinfo hooks. */
-#define CPUINFO_VENDOR		"IN2 Systems"
-#define CPUINFO_MACHINE		"TQM8260 PowerPC"
-
-#define BOOTROM_RESTART_ADDR	((uint)0x40000104)
-
-#endif	/* __TQM8260_PLATFORM */
diff --git a/arch/ppc/platforms/tqm8260_setup.c b/arch/ppc/platforms/tqm8260_setup.c
deleted file mode 100644
index b766339f44ac..000000000000
--- a/arch/ppc/platforms/tqm8260_setup.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * TQM8260 platform support
- *
- * Author: Allen Curtis <acurtis@onz.com>
- * Derived from: m8260_setup.c by Dan Malek, MVista
- *
- * Copyright 2002 Ones and Zeros, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-
-#include <asm/mpc8260.h>
-#include <asm/cpm2.h>
-#include <asm/machdep.h>
-
-static int
-tqm8260_set_rtc_time(unsigned long time)
-{
-	((cpm2_map_t *)CPM_MAP_ADDR)->im_sit.sit_tmcnt = time;
-	((cpm2_map_t *)CPM_MAP_ADDR)->im_sit.sit_tmcntsc = 0x3;
-
-	return(0);
-}
-
-static unsigned long
-tqm8260_get_rtc_time(void)
-{
-	return ((cpm2_map_t *)CPM_MAP_ADDR)->im_sit.sit_tmcnt;
-}
-
-void __init
-m82xx_board_init(void)
-{
-	/* Anything special for this platform */
-	ppc_md.set_rtc_time	= tqm8260_set_rtc_time;
-	ppc_md.get_rtc_time	= tqm8260_get_rtc_time;
-}
diff --git a/arch/ppc/platforms/tqm8xx.h b/arch/ppc/platforms/tqm8xx.h
deleted file mode 100644
index 662131d0eb39..000000000000
--- a/arch/ppc/platforms/tqm8xx.h
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * TQM8xx(L) board specific definitions
- *
- * Copyright (c) 1999-2002 Wolfgang Denk (wd@denx.de)
- */
-
-#ifdef __KERNEL__
-#ifndef __MACH_TQM8xx_H
-#define __MACH_TQM8xx_H
-
-
-#include <asm/ppcboot.h>
-
-#ifndef __ASSEMBLY__
-#define	TQM_IMMR_BASE	0xFFF00000	/* phys. addr of IMMR */
-#define	TQM_IMAP_SIZE	(64 * 1024)	/* size of mapped area */
-
-#define	IMAP_ADDR	TQM_IMMR_BASE	/* physical base address of IMMR area */
-#define IMAP_SIZE	TQM_IMAP_SIZE	/* mapped size of IMMR area */
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define PCMCIA_MEM_SIZE		( 64 << 20 )
-
-#ifndef CONFIG_KUP4K
-# define	MAX_HWIFS	1	/* overwrite default in include/asm-ppc/ide.h	*/
-
-#else	/* CONFIG_KUP4K */
-
-# define	MAX_HWIFS	2	/* overwrite default in include/asm-ppc/ide.h	*/
-# ifndef __ASSEMBLY__
-# include <asm/8xx_immap.h>
-static __inline__ void ide_led(int on)
-{
-	volatile immap_t	*immap = (immap_t *)IMAP_ADDR;
-
-	if (on) {
-		immap->im_ioport.iop_padat &= ~0x80;
-	} else {
-		immap->im_ioport.iop_padat |= 0x80;
-	}
-}
-# endif	/* __ASSEMBLY__ */
-# define IDE_LED(x) ide_led((x))
-#endif	/* CONFIG_KUP4K */
-
-/*
- * Definitions for IDE0 Interface
- */
-#define IDE0_BASE_OFFSET		0
-#define IDE0_DATA_REG_OFFSET		(PCMCIA_MEM_SIZE + 0x320)
-#define IDE0_ERROR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 1)
-#define IDE0_NSECTOR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 2)
-#define IDE0_SECTOR_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 3)
-#define IDE0_LCYL_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 4)
-#define IDE0_HCYL_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 5)
-#define IDE0_SELECT_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 6)
-#define IDE0_STATUS_REG_OFFSET		(2 * PCMCIA_MEM_SIZE + 0x320 + 7)
-#define IDE0_CONTROL_REG_OFFSET		0x0106
-#define IDE0_IRQ_REG_OFFSET		0x000A	/* not used */
-
-/* define IO_BASE for PCMCIA */
-#define _IO_BASE 0x80000000
-#define _IO_BASE_SIZE  (64<<10)
-
-#define	FEC_INTERRUPT		 9	/* = SIU_LEVEL4			*/
-#define PHY_INTERRUPT		12	/* = IRQ6			*/
-#define	IDE0_INTERRUPT		13
-
-#ifdef CONFIG_IDE
-#endif
-
-/*-----------------------------------------------------------------------
- * CPM Ethernet through SCCx.
- *-----------------------------------------------------------------------
- *
- */
-
-/***  TQM823L, TQM850L  ***********************************************/
-
-#if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L)
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
-#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
-#define PA_ENET_RCLK	((ushort)0x0100)	/* PA  7 */
-#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
-
-#define PB_ENET_TENA	((uint)0x00002000)	/* PB 18 */
-
-#define PC_ENET_CLSN	((ushort)0x0040)	/* PC  9 */
-#define PC_ENET_RENA	((ushort)0x0080)	/* PC  8 */
-
-/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
- * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00002600)
-#endif	/* CONFIG_TQM823L, CONFIG_TQM850L */
-
-/***  TQM860L  ********************************************************/
-
-#ifdef CONFIG_TQM860L
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD	((ushort)0x0001)	/* PA 15 */
-#define PA_ENET_TXD	((ushort)0x0002)	/* PA 14 */
-#define PA_ENET_RCLK	((ushort)0x0100)	/* PA  7 */
-#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
-
-#define PC_ENET_TENA	((ushort)0x0001)	/* PC 15 */
-#define PC_ENET_CLSN	((ushort)0x0010)	/* PC 11 */
-#define PC_ENET_RENA	((ushort)0x0020)	/* PC 10 */
-
-/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
- * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x00000026)
-#endif	/* CONFIG_TQM860L */
-
-/***  FPS850L  *********************************************************/
-
-#ifdef CONFIG_FPS850L
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC1 use.
- */
-#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
-#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
-#define PA_ENET_RCLK	((ushort)0x0100)	/* PA  7 */
-#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
-
-#define PC_ENET_TENA	((ushort)0x0002)	/* PC 14 */
-#define PC_ENET_CLSN	((ushort)0x0040)	/* PC  9 */
-#define PC_ENET_RENA	((ushort)0x0080)	/* PC  8 */
-
-/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
- * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x0000ff00)
-#define SICR_ENET_CLKRT	((uint)0x00002600)
-#endif	/* CONFIG_FPS850L */
-
-/* We don't use the 8259.
-*/
-#define NR_8259_INTS	0
-
-#endif /* !__ASSEMBLY__ */
-#endif	/* __MACH_TQM8xx_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
deleted file mode 100644
index 52ddebe6c6d1..000000000000
--- a/arch/ppc/syslib/Makefile
+++ /dev/null
@@ -1,96 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-CFLAGS_prom_init.o      += -fPIC
-CFLAGS_btext.o          += -fPIC
-
-wdt-mpc8xx-$(CONFIG_8xx_WDT)	+= m8xx_wdt.o
-
-obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
-obj-$(CONFIG_PPCBUG_NVRAM)	+= prep_nvram.o
-obj-$(CONFIG_PPC_OCP)		+= ocp.o
-obj-$(CONFIG_IBM_OCP)		+= ibm_ocp.o
-obj-$(CONFIG_44x)		+= ibm44x_common.o
-obj-$(CONFIG_440EP)		+= ibm440gx_common.o
-obj-$(CONFIG_440GP)		+= ibm440gp_common.o
-obj-$(CONFIG_440GX)		+= ibm440gx_common.o
-obj-$(CONFIG_440SP)		+= ibm440gx_common.o ibm440sp_common.o
-obj-$(CONFIG_440SPE)		+= ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o
-ifeq ($(CONFIG_4xx),y)
-ifeq ($(CONFIG_XILINX_VIRTEX),y)
-obj-$(CONFIG_40x)		+= xilinx_pic.o
-obj-y				+= virtex_devices.o
-else
-ifeq ($(CONFIG_403),y)
-obj-$(CONFIG_40x)		+= ppc403_pic.o
-else
-obj-$(CONFIG_40x)		+= ppc4xx_pic.o
-endif
-endif
-obj-$(CONFIG_44x)		+= ppc4xx_pic.o
-obj-$(CONFIG_40x)		+= ppc4xx_setup.o
-obj-$(CONFIG_GEN_RTC)		+= todc_time.o
-obj-$(CONFIG_PPC4xx_DMA)	+= ppc4xx_dma.o
-obj-$(CONFIG_PPC4xx_EDMA)	+= ppc4xx_sgdma.o
-ifeq ($(CONFIG_40x),y)
-obj-$(CONFIG_PCI)		+= pci_auto.o ppc405_pci.o
-endif
-endif
-obj-$(CONFIG_8xx)		+= m8xx_setup.o ppc8xx_pic.o $(wdt-mpc8xx-y) \
-				   ppc_sys.o mpc8xx_devices.o mpc8xx_sys.o
-obj-$(CONFIG_PCI_QSPAN)		+= qspan_pci.o
-obj-$(CONFIG_PPC_PREP)		+= open_pic.o todc_time.o
-obj-$(CONFIG_BAMBOO)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_CPCI690)		+= todc_time.o pci_auto.o
-obj-$(CONFIG_EBONY)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_EV64260)		+= todc_time.o pci_auto.o
-obj-$(CONFIG_EV64360)		+= todc_time.o
-obj-$(CONFIG_CHESTNUT)		+= mv64360_pic.o pci_auto.o
-obj-$(CONFIG_GT64260)		+= gt64260_pic.o
-obj-$(CONFIG_LOPEC)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_HDPU)		+= pci_auto.o
-obj-$(CONFIG_LUAN)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_YUCCA)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_KATANA)		+= pci_auto.o
-obj-$(CONFIG_MV64360)		+= mv64360_pic.o
-obj-$(CONFIG_MV64X60)		+= mv64x60.o mv64x60_win.o
-obj-$(CONFIG_MVME5100)		+= open_pic.o todc_time.o \
-					pci_auto.o hawk_common.o
-obj-$(CONFIG_OCOTEA)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_PAL4)		+= cpc700_pic.o
-obj-$(CONFIG_POWERPMC250)	+= pci_auto.o
-obj-$(CONFIG_PPLUS)		+= hawk_common.o open_pic.o \
-				   todc_time.o pci_auto.o
-obj-$(CONFIG_PRPMC750)		+= open_pic.o pci_auto.o \
-					hawk_common.o
-obj-$(CONFIG_HARRIER)		+= harrier.o
-obj-$(CONFIG_PRPMC800)		+= open_pic.o pci_auto.o
-obj-$(CONFIG_RADSTONE_PPC7D)	+= pci_auto.o
-obj-$(CONFIG_SANDPOINT)		+= pci_auto.o todc_time.o
-obj-$(CONFIG_SBC82xx)		+= todc_time.o
-obj-$(CONFIG_SPRUCE)		+= cpc700_pic.o pci_auto.o \
-				   todc_time.o
-obj-$(CONFIG_TAISHAN)		+= pci_auto.o
-obj-$(CONFIG_8260)		+= m8260_setup.o pq2_devices.o pq2_sys.o \
-				   ppc_sys.o
-obj-$(CONFIG_PCI_8260)		+= m82xx_pci.o pci_auto.o
-obj-$(CONFIG_8260_PCI9)		+= m8260_pci_erratum9.o
-obj-$(CONFIG_CPM2)		+= cpm2_common.o cpm2_pic.o
-ifeq ($(CONFIG_PPC_GEN550),y)
-obj-$(CONFIG_KGDB)		+= gen550_kgdb.o gen550_dbg.o
-obj-$(CONFIG_SERIAL_TEXT_DEBUG)	+= gen550_dbg.o
-endif
-ifeq ($(CONFIG_SERIAL_MPSC_CONSOLE),y)
-obj-$(CONFIG_SERIAL_TEXT_DEBUG)	+= mv64x60_dbg.o
-endif
-obj-$(CONFIG_BOOTX_TEXT)	+= btext.o
-obj-$(CONFIG_MPC10X_BRIDGE)	+= mpc10x_common.o ppc_sys.o
-obj-$(CONFIG_MPC10X_OPENPIC)	+= open_pic.o
-obj-$(CONFIG_PPC_MPC52xx)	+= mpc52xx_setup.o mpc52xx_pic.o \
-					mpc52xx_sys.o mpc52xx_devices.o ppc_sys.o
-ifeq ($(CONFIG_PPC_MPC52xx),y)
-obj-$(CONFIG_PCI)		+= mpc52xx_pci.o
-endif
-
-obj-$(CONFIG_PPC_I8259)		+= i8259.o
diff --git a/arch/ppc/syslib/btext.c b/arch/ppc/syslib/btext.c
deleted file mode 100644
index d11667046f21..000000000000
--- a/arch/ppc/syslib/btext.c
+++ /dev/null
@@ -1,860 +0,0 @@
-/*
- * Procedures for drawing on the screen early on in the boot process.
- *
- * Benjamin Herrenschmidt <benh@kernel.crashing.org>
- */
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/utsrelease.h>
-
-#include <asm/sections.h>
-#include <asm/bootx.h>
-#include <asm/btext.h>
-#include <asm/prom.h>
-#include <asm/page.h>
-#include <asm/mmu.h>
-#include <asm/pgtable.h>
-#include <asm/io.h>
-#include <asm/reg.h>
-
-#define NO_SCROLL
-
-#ifndef NO_SCROLL
-static void scrollscreen(void);
-#endif
-
-static void draw_byte(unsigned char c, long locX, long locY);
-static void draw_byte_32(unsigned char *bits, unsigned long *base, int rb);
-static void draw_byte_16(unsigned char *bits, unsigned long *base, int rb);
-static void draw_byte_8(unsigned char *bits, unsigned long *base, int rb);
-
-static int g_loc_X;
-static int g_loc_Y;
-static int g_max_loc_X;
-static int g_max_loc_Y;
-
-unsigned long disp_BAT[2] __initdata = {0, 0};
-
-#define cmapsz	(16*256)
-
-static unsigned char vga_font[cmapsz];
-
-int boot_text_mapped;
-int force_printk_to_btext = 0;
-
-boot_infos_t disp_bi;
-
-extern char *klimit;
-
-/*
- * Powermac can use btext_* after boot for xmon,
- * chrp only uses it during early boot.
- */
-#ifdef CONFIG_XMON
-#define BTEXT
-#define BTDATA
-#else
-#define BTEXT	__init
-#define BTDATA	__initdata
-#endif /* CONFIG_XMON */
-
-/*
- * This is called only when we are booted via BootX.
- */
-void __init
-btext_init(boot_infos_t *bi)
-{
-	g_loc_X = 0;
-	g_loc_Y = 0;
-	g_max_loc_X = (bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) / 8;
-	g_max_loc_Y = (bi->dispDeviceRect[3] - bi->dispDeviceRect[1]) / 16;
-	disp_bi = *bi;
-	boot_text_mapped = 1;
-}
-
-void __init
-btext_welcome(void)
-{
-	unsigned long flags;
-	unsigned long pvr;
-	boot_infos_t* bi = &disp_bi;
-
-	btext_drawstring("Welcome to Linux, kernel " UTS_RELEASE "\n");
-	btext_drawstring("\nlinked at        : 0x");
-	btext_drawhex(KERNELBASE);
-	btext_drawstring("\nframe buffer at  : 0x");
-	btext_drawhex((unsigned long)bi->dispDeviceBase);
-	btext_drawstring(" (phys), 0x");
-	btext_drawhex((unsigned long)bi->logicalDisplayBase);
-	btext_drawstring(" (log)");
-	btext_drawstring("\nklimit           : 0x");
-	btext_drawhex((unsigned long)klimit);
-	btext_drawstring("\nMSR              : 0x");
-	__asm__ __volatile__ ("mfmsr %0" : "=r" (flags));
-	btext_drawhex(flags);
-	__asm__ __volatile__ ("mfspr %0, 287" : "=r" (pvr));
-	pvr >>= 16;
-	if (pvr > 1) {
-	    btext_drawstring("\nHID0             : 0x");
-	    __asm__ __volatile__ ("mfspr %0, 1008" : "=r" (flags));
-	    btext_drawhex(flags);
-	}
-	if (pvr == 8 || pvr == 12 || pvr == 0x800c) {
-	    btext_drawstring("\nICTC             : 0x");
-	    __asm__ __volatile__ ("mfspr %0, 1019" : "=r" (flags));
-	    btext_drawhex(flags);
-	}
-	btext_drawstring("\n\n");
-}
-
-/* Calc BAT values for mapping the display and store them
- * in disp_BAT.  Those values are then used from head.S to map
- * the display during identify_machine() and MMU_Init()
- *
- * The display is mapped to virtual address 0xD0000000, rather
- * than 1:1, because some some CHRP machines put the frame buffer
- * in the region starting at 0xC0000000 (KERNELBASE).
- * This mapping is temporary and will disappear as soon as the
- * setup done by MMU_Init() is applied.
- *
- * For now, we align the BAT and then map 8Mb on 601 and 16Mb
- * on other PPCs. This may cause trouble if the framebuffer
- * is really badly aligned, but I didn't encounter this case
- * yet.
- */
-void __init
-btext_prepare_BAT(void)
-{
-	boot_infos_t* bi = &disp_bi;
-	unsigned long vaddr = KERNELBASE + 0x10000000;
-	unsigned long addr;
-	unsigned long lowbits;
-
-	addr = (unsigned long)bi->dispDeviceBase;
-	if (!addr) {
-		boot_text_mapped = 0;
-		return;
-	}
-	if (PVR_VER(mfspr(SPRN_PVR)) != 1) {
-		/* 603, 604, G3, G4, ... */
-		lowbits = addr & ~0xFF000000UL;
-		addr &= 0xFF000000UL;
-		disp_BAT[0] = vaddr | (BL_16M<<2) | 2;
-		disp_BAT[1] = addr | (_PAGE_NO_CACHE | _PAGE_GUARDED | BPP_RW);	
-	} else {
-		/* 601 */
-		lowbits = addr & ~0xFF800000UL;
-		addr &= 0xFF800000UL;
-		disp_BAT[0] = vaddr | (_PAGE_NO_CACHE | PP_RWXX) | 4;
-		disp_BAT[1] = addr | BL_8M | 0x40;
-	}
-	bi->logicalDisplayBase = (void *) (vaddr + lowbits);
-}
-
-/* This function will enable the early boot text when doing OF booting. This
- * way, xmon output should work too
- */
-void __init
-btext_setup_display(int width, int height, int depth, int pitch,
-		    unsigned long address)
-{
-	boot_infos_t* bi = &disp_bi;
-
-	g_loc_X = 0;
-	g_loc_Y = 0;
-	g_max_loc_X = width / 8;
-	g_max_loc_Y = height / 16;
-	bi->logicalDisplayBase = (unsigned char *)address;
-	bi->dispDeviceBase = (unsigned char *)address;
-	bi->dispDeviceRowBytes = pitch;
-	bi->dispDeviceDepth = depth;
-	bi->dispDeviceRect[0] = bi->dispDeviceRect[1] = 0;
-	bi->dispDeviceRect[2] = width;
-	bi->dispDeviceRect[3] = height;
-	boot_text_mapped = 1;
-}
-
-/* Here's a small text engine to use during early boot
- * or for debugging purposes
- *
- * todo:
- *
- *  - build some kind of vgacon with it to enable early printk
- *  - move to a separate file
- *  - add a few video driver hooks to keep in sync with display
- *    changes.
- */
-
-void
-map_boot_text(void)
-{
-	unsigned long base, offset, size;
-	boot_infos_t *bi = &disp_bi;
-	unsigned char *vbase;
-
-	/* By default, we are no longer mapped */
-	boot_text_mapped = 0;
-	if (bi->dispDeviceBase == 0)
-		return;
-	base = ((unsigned long) bi->dispDeviceBase) & 0xFFFFF000UL;
-	offset = ((unsigned long) bi->dispDeviceBase) - base;
-	size = bi->dispDeviceRowBytes * bi->dispDeviceRect[3] + offset
-		+ bi->dispDeviceRect[0];
-	vbase = ioremap(base, size);
-	if (vbase == 0)
-		return;
-	bi->logicalDisplayBase = vbase + offset;
-	boot_text_mapped = 1;
-}
-
-/* Calc the base address of a given point (x,y) */
-static unsigned char * BTEXT
-calc_base(boot_infos_t *bi, int x, int y)
-{
-	unsigned char *base;
-
-	base = bi->logicalDisplayBase;
-	if (base == 0)
-		base = bi->dispDeviceBase;
-	base += (x + bi->dispDeviceRect[0]) * (bi->dispDeviceDepth >> 3);
-	base += (y + bi->dispDeviceRect[1]) * bi->dispDeviceRowBytes;
-	return base;
-}
-
-/* Adjust the display to a new resolution */
-void
-btext_update_display(unsigned long phys, int width, int height,
-		     int depth, int pitch)
-{
-	boot_infos_t *bi = &disp_bi;
-
-	if (bi->dispDeviceBase == 0)
-		return;
-
-	/* check it's the same frame buffer (within 256MB) */
-	if ((phys ^ (unsigned long)bi->dispDeviceBase) & 0xf0000000)
-		return;
-
-	bi->dispDeviceBase = (__u8 *) phys;
-	bi->dispDeviceRect[0] = 0;
-	bi->dispDeviceRect[1] = 0;
-	bi->dispDeviceRect[2] = width;
-	bi->dispDeviceRect[3] = height;
-	bi->dispDeviceDepth = depth;
-	bi->dispDeviceRowBytes = pitch;
-	if (boot_text_mapped) {
-		iounmap(bi->logicalDisplayBase);
-		boot_text_mapped = 0;
-	}
-	map_boot_text();
-	g_loc_X = 0;
-	g_loc_Y = 0;
-	g_max_loc_X = width / 8;
-	g_max_loc_Y = height / 16;
-}
-
-void BTEXT btext_clearscreen(void)
-{
-	boot_infos_t* bi	= &disp_bi;
-	unsigned long *base	= (unsigned long *)calc_base(bi, 0, 0);
-	unsigned long width 	= ((bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) *
-					(bi->dispDeviceDepth >> 3)) >> 2;
-	int i,j;
-
-	for (i=0; i<(bi->dispDeviceRect[3] - bi->dispDeviceRect[1]); i++)
-	{
-		unsigned long *ptr = base;
-		for(j=width; j; --j)
-			*(ptr++) = 0;
-		base += (bi->dispDeviceRowBytes >> 2);
-	}
-}
-
-__inline__ void dcbst(const void* addr)
-{
-	__asm__ __volatile__ ("dcbst 0,%0" :: "r" (addr));
-}
-
-void BTEXT btext_flushscreen(void)
-{
-	boot_infos_t* bi	= &disp_bi;
-	unsigned long *base	= (unsigned long *)calc_base(bi, 0, 0);
-	unsigned long width 	= ((bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) *
-					(bi->dispDeviceDepth >> 3)) >> 2;
-	int i,j;
-
-	for (i=0; i<(bi->dispDeviceRect[3] - bi->dispDeviceRect[1]); i++)
-	{
-		unsigned long *ptr = base;
-		for(j=width; j>0; j-=8) {
-			dcbst(ptr);
-			ptr += 8;
-		}
-		base += (bi->dispDeviceRowBytes >> 2);
-	}
-}
-
-#ifndef NO_SCROLL
-static BTEXT void
-scrollscreen(void)
-{
-	boot_infos_t* bi		= &disp_bi;
-	unsigned long *src		= (unsigned long *)calc_base(bi,0,16);
-	unsigned long *dst		= (unsigned long *)calc_base(bi,0,0);
-	unsigned long width		= ((bi->dispDeviceRect[2] - bi->dispDeviceRect[0]) *
-						(bi->dispDeviceDepth >> 3)) >> 2;
-	int i,j;
-
-#ifdef CONFIG_ADB_PMU
-	pmu_suspend();	/* PMU will not shut us down ! */
-#endif
-	for (i=0; i<(bi->dispDeviceRect[3] - bi->dispDeviceRect[1] - 16); i++)
-	{
-		unsigned long *src_ptr = src;
-		unsigned long *dst_ptr = dst;
-		for(j=width; j; --j)
-			*(dst_ptr++) = *(src_ptr++);
-		src += (bi->dispDeviceRowBytes >> 2);
-		dst += (bi->dispDeviceRowBytes >> 2);
-	}
-	for (i=0; i<16; i++)
-	{
-		unsigned long *dst_ptr = dst;
-		for(j=width; j; --j)
-			*(dst_ptr++) = 0;
-		dst += (bi->dispDeviceRowBytes >> 2);
-	}
-#ifdef CONFIG_ADB_PMU
-	pmu_resume();	/* PMU will not shut us down ! */
-#endif
-}
-#endif /* ndef NO_SCROLL */
-
-void BTEXT btext_drawchar(char c)
-{
-	int cline = 0, x;
-
-	if (!boot_text_mapped)
-		return;
-
-	switch (c) {
-	case '\b':
-		if (g_loc_X > 0)
-			--g_loc_X;
-		break;
-	case '\t':
-		g_loc_X = (g_loc_X & -8) + 8;
-		break;
-	case '\r':
-		g_loc_X = 0;
-		break;
-	case '\n':
-		g_loc_X = 0;
-		g_loc_Y++;
-		cline = 1;
-		break;
-	default:
-		draw_byte(c, g_loc_X++, g_loc_Y);
-	}
-	if (g_loc_X >= g_max_loc_X) {
-		g_loc_X = 0;
-		g_loc_Y++;
-		cline = 1;
-	}
-#ifndef NO_SCROLL
-	while (g_loc_Y >= g_max_loc_Y) {
-		scrollscreen();
-		g_loc_Y--;
-	}
-#else
-	/* wrap around from bottom to top of screen so we don't
-	   waste time scrolling each line.  -- paulus. */
-	if (g_loc_Y >= g_max_loc_Y)
-		g_loc_Y = 0;
-	if (cline) {
-		for (x = 0; x < g_max_loc_X; ++x)
-			draw_byte(' ', x, g_loc_Y);
-	}
-#endif
-}
-
-void BTEXT
-btext_drawstring(const char *c)
-{
-	if (!boot_text_mapped)
-		return;
-	while (*c)
-		btext_drawchar(*c++);
-}
-
-void BTEXT
-btext_drawhex(unsigned long v)
-{
-	static char hex_table[] = "0123456789abcdef";
-
-	if (!boot_text_mapped)
-		return;
-	btext_drawchar(hex_table[(v >> 28) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 24) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 20) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 16) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >> 12) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >>  8) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >>  4) & 0x0000000FUL]);
-	btext_drawchar(hex_table[(v >>  0) & 0x0000000FUL]);
-	btext_drawchar(' ');
-}
-
-static void BTEXT
-draw_byte(unsigned char c, long locX, long locY)
-{
-	boot_infos_t* bi	= &disp_bi;
-	unsigned char *base	= calc_base(bi, locX << 3, locY << 4);
-	unsigned char *font	= &vga_font[((unsigned long)c) * 16];
-	int rb			= bi->dispDeviceRowBytes;
-
-	switch(bi->dispDeviceDepth) {
-	case 24:
-	case 32:
-		draw_byte_32(font, (unsigned long *)base, rb);
-		break;
-	case 15:
-	case 16:
-		draw_byte_16(font, (unsigned long *)base, rb);
-		break;
-	case 8:
-		draw_byte_8(font, (unsigned long *)base, rb);
-		break;
-	}
-}
-
-static unsigned long expand_bits_8[16] BTDATA = {
-	0x00000000,
-	0x000000ff,
-	0x0000ff00,
-	0x0000ffff,
-	0x00ff0000,
-	0x00ff00ff,
-	0x00ffff00,
-	0x00ffffff,
-	0xff000000,
-	0xff0000ff,
-	0xff00ff00,
-	0xff00ffff,
-	0xffff0000,
-	0xffff00ff,
-	0xffffff00,
-	0xffffffff
-};
-
-static unsigned long expand_bits_16[4] BTDATA = {
-	0x00000000,
-	0x0000ffff,
-	0xffff0000,
-	0xffffffff
-};
-
-
-static void BTEXT
-draw_byte_32(unsigned char *font, unsigned long *base, int rb)
-{
-	int l, bits;
-	int fg = 0xFFFFFFFFUL;
-	int bg = 0x00000000UL;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (-(bits >> 7) & fg) ^ bg;
-		base[1] = (-((bits >> 6) & 1) & fg) ^ bg;
-		base[2] = (-((bits >> 5) & 1) & fg) ^ bg;
-		base[3] = (-((bits >> 4) & 1) & fg) ^ bg;
-		base[4] = (-((bits >> 3) & 1) & fg) ^ bg;
-		base[5] = (-((bits >> 2) & 1) & fg) ^ bg;
-		base[6] = (-((bits >> 1) & 1) & fg) ^ bg;
-		base[7] = (-(bits & 1) & fg) ^ bg;
-		base = (unsigned long *) ((char *)base + rb);
-	}
-}
-
-static void BTEXT
-draw_byte_16(unsigned char *font, unsigned long *base, int rb)
-{
-	int l, bits;
-	int fg = 0xFFFFFFFFUL;
-	int bg = 0x00000000UL;
-	unsigned long *eb = expand_bits_16;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (eb[bits >> 6] & fg) ^ bg;
-		base[1] = (eb[(bits >> 4) & 3] & fg) ^ bg;
-		base[2] = (eb[(bits >> 2) & 3] & fg) ^ bg;
-		base[3] = (eb[bits & 3] & fg) ^ bg;
-		base = (unsigned long *) ((char *)base + rb);
-	}
-}
-
-static void BTEXT
-draw_byte_8(unsigned char *font, unsigned long *base, int rb)
-{
-	int l, bits;
-	int fg = 0x0F0F0F0FUL;
-	int bg = 0x00000000UL;
-	unsigned long *eb = expand_bits_8;
-
-	for (l = 0; l < 16; ++l)
-	{
-		bits = *font++;
-		base[0] = (eb[bits >> 4] & fg) ^ bg;
-		base[1] = (eb[bits & 0xf] & fg) ^ bg;
-		base = (unsigned long *) ((char *)base + rb);
-	}
-}
-
-static unsigned char vga_font[cmapsz] BTDATA = {
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x81, 0xa5, 0x81, 0x81, 0xbd,
-0x99, 0x81, 0x81, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xff,
-0xdb, 0xff, 0xff, 0xc3, 0xe7, 0xff, 0xff, 0x7e, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x6c, 0xfe, 0xfe, 0xfe, 0xfe, 0x7c, 0x38, 0x10,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x7c, 0xfe,
-0x7c, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18,
-0x3c, 0x3c, 0xe7, 0xe7, 0xe7, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x18, 0x3c, 0x7e, 0xff, 0xff, 0x7e, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c,
-0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff,
-0xff, 0xff, 0xe7, 0xc3, 0xc3, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x42, 0x42, 0x66, 0x3c, 0x00,
-0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc3, 0x99, 0xbd,
-0xbd, 0x99, 0xc3, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x1e, 0x0e,
-0x1a, 0x32, 0x78, 0xcc, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x3c, 0x66, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x33, 0x3f, 0x30, 0x30, 0x30,
-0x30, 0x70, 0xf0, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x63,
-0x7f, 0x63, 0x63, 0x63, 0x63, 0x67, 0xe7, 0xe6, 0xc0, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x18, 0x18, 0xdb, 0x3c, 0xe7, 0x3c, 0xdb, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfe, 0xf8,
-0xf0, 0xe0, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x06, 0x0e,
-0x1e, 0x3e, 0xfe, 0x3e, 0x1e, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66,
-0x66, 0x00, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xdb,
-0xdb, 0xdb, 0x7b, 0x1b, 0x1b, 0x1b, 0x1b, 0x1b, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x7c, 0xc6, 0x60, 0x38, 0x6c, 0xc6, 0xc6, 0x6c, 0x38, 0x0c, 0xc6,
-0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0xfe, 0xfe, 0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c,
-0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x7e, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x18, 0x0c, 0xfe, 0x0c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x60, 0xfe, 0x60, 0x30, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0,
-0xc0, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x24, 0x66, 0xff, 0x66, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x38, 0x7c, 0x7c, 0xfe, 0xfe, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe, 0x7c, 0x7c,
-0x38, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x24, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6c,
-0x6c, 0xfe, 0x6c, 0x6c, 0x6c, 0xfe, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00,
-0x18, 0x18, 0x7c, 0xc6, 0xc2, 0xc0, 0x7c, 0x06, 0x06, 0x86, 0xc6, 0x7c,
-0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc2, 0xc6, 0x0c, 0x18,
-0x30, 0x60, 0xc6, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c,
-0x6c, 0x38, 0x76, 0xdc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x30, 0x30, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x30, 0x30, 0x30,
-0x30, 0x30, 0x18, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x18,
-0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x3c, 0xff, 0x3c, 0x66, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e,
-0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x02, 0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xce, 0xde, 0xf6, 0xe6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x38, 0x78, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
-0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0x06, 0x06, 0x3c, 0x06, 0x06, 0x06, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x1c, 0x3c, 0x6c, 0xcc, 0xfe,
-0x0c, 0x0c, 0x0c, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0,
-0xc0, 0xc0, 0xfc, 0x06, 0x06, 0x06, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x38, 0x60, 0xc0, 0xc0, 0xfc, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0x06, 0x06, 0x0c, 0x18,
-0x30, 0x30, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
-0xc6, 0xc6, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x06, 0x06, 0x0c, 0x78,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00,
-0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x18, 0x18, 0x00, 0x00, 0x00, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x06,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00,
-0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60,
-0x30, 0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0xc6, 0x0c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xde, 0xde,
-0xde, 0xdc, 0xc0, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38,
-0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x66, 0x66, 0x66, 0x66, 0xfc,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0xc2, 0xc0, 0xc0, 0xc0,
-0xc0, 0xc2, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x6c,
-0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x6c, 0xf8, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68, 0x60, 0x62, 0x66, 0xfe,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68,
-0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66,
-0xc2, 0xc0, 0xc0, 0xde, 0xc6, 0xc6, 0x66, 0x3a, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x0c,
-0x0c, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xe6, 0x66, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0x66, 0xe6,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x60, 0x60, 0x60, 0x60, 0x60,
-0x60, 0x62, 0x66, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xe7,
-0xff, 0xff, 0xdb, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6, 0xc6,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66,
-0x66, 0x66, 0x7c, 0x60, 0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xd6, 0xde, 0x7c,
-0x0c, 0x0e, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x6c,
-0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6,
-0xc6, 0x60, 0x38, 0x0c, 0x06, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xff, 0xdb, 0x99, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3,
-0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x66,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x18,
-0x3c, 0x66, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3,
-0xc3, 0x66, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xff, 0xc3, 0x86, 0x0c, 0x18, 0x30, 0x60, 0xc1, 0xc3, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x30, 0x30, 0x30, 0x30, 0x30,
-0x30, 0x30, 0x30, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80,
-0xc0, 0xe0, 0x70, 0x38, 0x1c, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x3c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00,
-0x30, 0x30, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x0c, 0x7c,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x60,
-0x60, 0x78, 0x6c, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc0, 0xc0, 0xc0, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x0c, 0x0c, 0x3c, 0x6c, 0xcc,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xf0,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xcc, 0xcc,
-0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0xcc, 0x78, 0x00, 0x00, 0x00, 0xe0, 0x60,
-0x60, 0x6c, 0x76, 0x66, 0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x18, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x00, 0x0e, 0x06, 0x06,
-0x06, 0x06, 0x06, 0x06, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0xe0, 0x60,
-0x60, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe6, 0xff, 0xdb,
-0xdb, 0xdb, 0xdb, 0xdb, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x66, 0x66,
-0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x76, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0x0c, 0x1e, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x76, 0x66, 0x60, 0x60, 0x60, 0xf0,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0x60,
-0x38, 0x0c, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x30,
-0x30, 0xfc, 0x30, 0x30, 0x30, 0x30, 0x36, 0x1c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0xc3,
-0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0x3c, 0x66, 0xc3,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xfe, 0xcc, 0x18, 0x30, 0x60, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x0e, 0x18, 0x18, 0x18, 0x70, 0x18, 0x18, 0x18, 0x18, 0x0e,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x00, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x18,
-0x18, 0x18, 0x0e, 0x18, 0x18, 0x18, 0x18, 0x70, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6,
-0xc6, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66,
-0xc2, 0xc0, 0xc0, 0xc0, 0xc2, 0x66, 0x3c, 0x0c, 0x06, 0x7c, 0x00, 0x00,
-0x00, 0x00, 0xcc, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x00, 0x7c, 0xc6, 0xfe,
-0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c,
-0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xcc, 0x00, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0x78, 0x0c, 0x7c,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38,
-0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x60, 0x60, 0x66, 0x3c, 0x0c, 0x06,
-0x3c, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xfe,
-0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00,
-0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x60, 0x30, 0x18, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x00, 0x00, 0x38, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, 0x66,
-0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x60, 0x30, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6,
-0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38, 0x00,
-0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
-0x18, 0x30, 0x60, 0x00, 0xfe, 0x66, 0x60, 0x7c, 0x60, 0x60, 0x66, 0xfe,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6e, 0x3b, 0x1b,
-0x7e, 0xd8, 0xdc, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x6c,
-0xcc, 0xcc, 0xfe, 0xcc, 0xcc, 0xcc, 0xcc, 0xce, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x00, 0x7c, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18,
-0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x30, 0x78, 0xcc, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0xcc, 0xcc, 0xcc,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00,
-0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0x78, 0x00,
-0x00, 0xc6, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6,
-0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e,
-0xc3, 0xc0, 0xc0, 0xc0, 0xc3, 0x7e, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xe6, 0xfc,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0xff, 0x18,
-0xff, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66,
-0x7c, 0x62, 0x66, 0x6f, 0x66, 0x66, 0x66, 0xf3, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x0e, 0x1b, 0x18, 0x18, 0x18, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18,
-0xd8, 0x70, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0x78, 0x0c, 0x7c,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30,
-0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x18, 0x30, 0x60, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0xcc, 0xcc, 0xcc,
-0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc,
-0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00,
-0x76, 0xdc, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x6c, 0x6c, 0x3e, 0x00, 0x7e, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c,
-0x38, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x30, 0x30, 0x00, 0x30, 0x30, 0x60, 0xc0, 0xc6, 0xc6, 0x7c,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0,
-0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0xfe, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30, 0x60, 0xce, 0x9b, 0x06,
-0x0c, 0x1f, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30,
-0x66, 0xce, 0x96, 0x3e, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18,
-0x00, 0x18, 0x18, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x6c, 0xd8, 0x6c, 0x36, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd8, 0x6c, 0x36,
-0x6c, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11, 0x44, 0x11, 0x44,
-0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44,
-0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa,
-0x55, 0xaa, 0x55, 0xaa, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77,
-0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x18, 0xf8,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36,
-0x36, 0xf6, 0x06, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x06, 0xf6,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0xf6, 0x06, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xfe, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x37,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x37, 0x30, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xf7, 0x00, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xff, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x37, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36,
-0x36, 0xf7, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xff,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xff, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x3f,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x1f, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f,
-0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x36, 0x36, 0x36, 0xff, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36,
-0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
-0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff,
-0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf0, 0xf0, 0xf0, 0xf0,
-0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0,
-0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f,
-0x0f, 0x0f, 0x0f, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x76, 0xdc, 0xd8, 0xd8, 0xd8, 0xdc, 0x76, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x78, 0xcc, 0xcc, 0xcc, 0xd8, 0xcc, 0xc6, 0xc6, 0xc6, 0xcc,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0xc6, 0xc0, 0xc0, 0xc0,
-0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0xfe, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0xfe, 0xc6, 0x60, 0x30, 0x18, 0x30, 0x60, 0xc6, 0xfe,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xd8, 0xd8,
-0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x66, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xc0, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x18, 0x3c, 0x66, 0x66,
-0x66, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38,
-0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0x6c, 0x38, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0x6c, 0x6c, 0x6c, 0x6c, 0xee,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x30, 0x18, 0x0c, 0x3e, 0x66,
-0x66, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x7e, 0xdb, 0xdb, 0xdb, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x03, 0x06, 0x7e, 0xdb, 0xdb, 0xf3, 0x7e, 0x60, 0xc0,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x30, 0x60, 0x60, 0x7c, 0x60,
-0x60, 0x60, 0x30, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c,
-0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, 0x18,
-0x18, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30,
-0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x00, 0x7e,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x1b, 0x1b, 0x1b, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
-0x18, 0x18, 0x18, 0x18, 0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x7e, 0x00, 0x18, 0x18, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x00,
-0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c,
-0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0c, 0x0c,
-0x0c, 0x0c, 0x0c, 0xec, 0x6c, 0x6c, 0x3c, 0x1c, 0x00, 0x00, 0x00, 0x00,
-0x00, 0xd8, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0xd8, 0x30, 0x60, 0xc8, 0xf8, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-0x00, 0x00, 0x00, 0x00,
-};
diff --git a/arch/ppc/syslib/cpc700.h b/arch/ppc/syslib/cpc700.h
deleted file mode 100644
index 987e9aa0dd45..000000000000
--- a/arch/ppc/syslib/cpc700.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * Header file for IBM CPC700 Host Bridge, et. al.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2000-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * This file contains the defines and macros for the IBM CPC700 host bridge,
- * memory controller, PIC, UARTs, IIC, and Timers.
- */
-
-#ifndef	__PPC_SYSLIB_CPC700_H__
-#define	__PPC_SYSLIB_CPC700_H__
-
-#include <linux/stddef.h>
-#include <linux/types.h>
-#include <linux/init.h>
-
-/* XXX no barriers? not even any volatiles?  -- paulus */
-#define CPC700_OUT_32(a,d)  (*(u_int *)a = d)
-#define CPC700_IN_32(a)     (*(u_int *)a)
-
-/*
- * PCI Section
- */
-#define CPC700_PCI_CONFIG_ADDR          0xfec00000
-#define CPC700_PCI_CONFIG_DATA          0xfec00004
-
-/* CPU -> PCI memory window 0 */
-#define CPC700_PMM0_LOCAL		0xff400000	/* CPU physical addr */
-#define CPC700_PMM0_MASK_ATTR		0xff400004	/* size and attrs */
-#define CPC700_PMM0_PCI_LOW		0xff400008	/* PCI addr, low word */
-#define CPC700_PMM0_PCI_HIGH		0xff40000c	/* PCI addr, high wd */
-/* CPU -> PCI memory window 1 */
-#define CPC700_PMM1_LOCAL		0xff400010
-#define CPC700_PMM1_MASK_ATTR		0xff400014
-#define CPC700_PMM1_PCI_LOW		0xff400018
-#define CPC700_PMM1_PCI_HIGH		0xff40001c
-/* CPU -> PCI memory window 2 */
-#define CPC700_PMM2_LOCAL		0xff400020
-#define CPC700_PMM2_MASK_ATTR		0xff400024
-#define CPC700_PMM2_PCI_LOW		0xff400028
-#define CPC700_PMM2_PCI_HIGH		0xff40002c
-/* PCI memory -> CPU window 1 */
-#define CPC700_PTM1_MEMSIZE		0xff400030	/* window size */
-#define CPC700_PTM1_LOCAL		0xff400034	/* CPU phys addr */
-/* PCI memory -> CPU window 2 */
-#define CPC700_PTM2_MEMSIZE		0xff400038	/* size and enable */
-#define CPC700_PTM2_LOCAL		0xff40003c
-
-/*
- * PIC Section
- *
- * IBM calls the CPC700's programmable interrupt controller the Universal
- * Interrupt Controller or UIC.
- */
-
-/*
- * UIC Register Addresses.
- */
-#define	CPC700_UIC_UICSR		0xff500880	/* Status Reg (Rd/Clr)*/
-#define	CPC700_UIC_UICSRS		0xff500884	/* Status Reg (Set) */
-#define	CPC700_UIC_UICER		0xff500888	/* Enable Reg */
-#define	CPC700_UIC_UICCR		0xff50088c	/* Critical Reg */
-#define	CPC700_UIC_UICPR		0xff500890	/* Polarity Reg */
-#define	CPC700_UIC_UICTR		0xff500894	/* Trigger Reg */
-#define	CPC700_UIC_UICMSR		0xff500898	/* Masked Status Reg */
-#define	CPC700_UIC_UICVR		0xff50089c	/* Vector Reg */
-#define	CPC700_UIC_UICVCR		0xff5008a0	/* Vector Config Reg */
-
-#define	CPC700_UIC_UICER_ENABLE		0x00000001	/* Enable an IRQ */
-
-#define	CPC700_UIC_UICVCR_31_HI		0x00000000	/* IRQ 31 hi priority */
-#define	CPC700_UIC_UICVCR_0_HI		0x00000001	/* IRQ 0 hi priority */
-#define CPC700_UIC_UICVCR_BASE_MASK	0xfffffffc
-#define CPC700_UIC_UICVCR_ORDER_MASK	0x00000001
-
-/* Specify value of a bit for an IRQ. */
-#define	CPC700_UIC_IRQ_BIT(i)		((0x00000001) << (31 - (i)))
-
-/*
- * UIC Exports...
- */
-extern struct hw_interrupt_type cpc700_pic;
-extern unsigned int cpc700_irq_assigns[32][2];
-
-extern void __init cpc700_init_IRQ(void);
-extern int cpc700_get_irq(void);
-
-#endif	/* __PPC_SYSLIB_CPC700_H__ */
diff --git a/arch/ppc/syslib/cpc700_pic.c b/arch/ppc/syslib/cpc700_pic.c
deleted file mode 100644
index d48e8f45c050..000000000000
--- a/arch/ppc/syslib/cpc700_pic.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Interrupt controller support for IBM Spruce
- *
- * Authors: Mark Greer, Matt Porter, and Johnnie Peters
- *	    mgreer@mvista.com
- *          mporter@mvista.com
- *          jpeters@mvista.com
- *
- * 2001-2002 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-
-#include "cpc700.h"
-
-static void
-cpc700_unmask_irq(unsigned int irq)
-{
-	unsigned int tr_bits;
-
-	/*
-	 * IRQ 31 is largest IRQ supported.
-	 * IRQs 17-19 are reserved.
-	 */
-	if ((irq <= 31) && ((irq < 17) || (irq > 19))) {
-		tr_bits = CPC700_IN_32(CPC700_UIC_UICTR);
-
-		if ((tr_bits & (1 << (31 - irq))) == 0) {
-			/* level trigger interrupt, clear bit in status
-			 * register */
-			CPC700_OUT_32(CPC700_UIC_UICSR, 1 << (31 - irq));
-		}
-
-		/* Know IRQ fits in entry 0 of ppc_cached_irq_mask[] */
-		ppc_cached_irq_mask[0] |= CPC700_UIC_IRQ_BIT(irq);
-	
-		CPC700_OUT_32(CPC700_UIC_UICER, ppc_cached_irq_mask[0]);
-	}
-	return;
-}
-
-static void
-cpc700_mask_irq(unsigned int irq)
-{
-	/*
-	 * IRQ 31 is largest IRQ supported.
-	 * IRQs 17-19 are reserved.
-	 */
-	if ((irq <= 31) && ((irq < 17) || (irq > 19))) {
-		/* Know IRQ fits in entry 0 of ppc_cached_irq_mask[] */
-		ppc_cached_irq_mask[0] &=
-			~CPC700_UIC_IRQ_BIT(irq);
-
-		CPC700_OUT_32(CPC700_UIC_UICER, ppc_cached_irq_mask[0]);
-	}
-	return;
-}
-
-static void
-cpc700_mask_and_ack_irq(unsigned int irq)
-{
-	u_int	bit;
-
-	/*
-	 * IRQ 31 is largest IRQ supported.
-	 * IRQs 17-19 are reserved.
-	 */
-	if ((irq <= 31) && ((irq < 17) || (irq > 19))) {
-		/* Know IRQ fits in entry 0 of ppc_cached_irq_mask[] */
-		bit = CPC700_UIC_IRQ_BIT(irq);
-
-		ppc_cached_irq_mask[0] &= ~bit;
-		CPC700_OUT_32(CPC700_UIC_UICER, ppc_cached_irq_mask[0]);
-		CPC700_OUT_32(CPC700_UIC_UICSR, bit); /* Write 1 clears IRQ */
-	}
-	return;
-}
-
-static struct hw_interrupt_type cpc700_pic = {
-	.typename = "CPC700 PIC",
-	.enable = cpc700_unmask_irq,
-	.disable = cpc700_mask_irq,
-	.ack = cpc700_mask_and_ack_irq,
-};
-
-__init static void
-cpc700_pic_init_irq(unsigned int irq)
-{
-	unsigned int tmp;
-
-	/* Set interrupt sense */
-	tmp = CPC700_IN_32(CPC700_UIC_UICTR);
-	if (cpc700_irq_assigns[irq][0] == 0) {
-		tmp &= ~CPC700_UIC_IRQ_BIT(irq);
-	} else {
-		tmp |= CPC700_UIC_IRQ_BIT(irq);
-	}
-	CPC700_OUT_32(CPC700_UIC_UICTR, tmp);
-
-	/* Set interrupt polarity */
-	tmp = CPC700_IN_32(CPC700_UIC_UICPR);
-	if (cpc700_irq_assigns[irq][1]) {
-		tmp |= CPC700_UIC_IRQ_BIT(irq);
-	} else {
-		tmp &= ~CPC700_UIC_IRQ_BIT(irq);
-	}
-	CPC700_OUT_32(CPC700_UIC_UICPR, tmp);
-
-	/* Set interrupt critical */
-	tmp = CPC700_IN_32(CPC700_UIC_UICCR);
-	tmp |= CPC700_UIC_IRQ_BIT(irq);
-	CPC700_OUT_32(CPC700_UIC_UICCR, tmp);
-		
-	return;
-}
-
-__init void
-cpc700_init_IRQ(void)
-{
-	int i;
-
-	ppc_cached_irq_mask[0] = 0;
-	CPC700_OUT_32(CPC700_UIC_UICER, 0x00000000);    /* Disable all irq's */
-	CPC700_OUT_32(CPC700_UIC_UICSR, 0xffffffff);    /* Clear cur intrs */
-	CPC700_OUT_32(CPC700_UIC_UICCR, 0xffffffff);    /* Gen INT not MCP */
-	CPC700_OUT_32(CPC700_UIC_UICPR, 0x00000000);    /* Active low */
-	CPC700_OUT_32(CPC700_UIC_UICTR, 0x00000000);    /* Level Sensitive */
-	CPC700_OUT_32(CPC700_UIC_UICVR, CPC700_UIC_UICVCR_0_HI);
-						        /* IRQ 0 is highest */
-
-	for (i = 0; i < 17; i++) {
-		irq_desc[i].chip = &cpc700_pic;
-		cpc700_pic_init_irq(i);
-	}
-
-	for (i = 20; i < 32; i++) {
-		irq_desc[i].chip = &cpc700_pic;
-		cpc700_pic_init_irq(i);
-	}
-
-	return;
-}
-
-
-
-/*
- * Find the highest IRQ that generating an interrupt, if any.
- */
-int
-cpc700_get_irq(void)
-{
-	int irq = 0;
-	u_int irq_status, irq_test = 1;
-
-	irq_status = CPC700_IN_32(CPC700_UIC_UICMSR);
-
-	do
-	{
-		if (irq_status & irq_test)
-			break;
-		irq++;
-		irq_test <<= 1;
-	} while (irq < NR_IRQS);
-	
-
-	if (irq == NR_IRQS)
-	    irq = 33;
-
-	return (31 - irq);
-}
diff --git a/arch/ppc/syslib/cpm2_common.c b/arch/ppc/syslib/cpm2_common.c
deleted file mode 100644
index 6cd859d7721f..000000000000
--- a/arch/ppc/syslib/cpm2_common.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * General Purpose functions for the global management of the
- * 8260 Communication Processor Module.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
- *	2.3.99 Updates
- *
- * In addition to the individual control of the communication
- * channels, there are a few functions that globally affect the
- * communication processor.
- *
- * Buffer descriptors must be allocated from the dual ported memory
- * space.  The allocator for that is here.  When the communication
- * process is reset, we reclaim the memory available.  There is
- * currently no deallocator for this memory.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/mpc8260.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/cpm2.h>
-#include <asm/rheap.h>
-
-static void cpm2_dpinit(void);
-cpm_cpm2_t	*cpmp;		/* Pointer to comm processor space */
-
-/* We allocate this here because it is used almost exclusively for
- * the communication processor devices.
- */
-cpm2_map_t *cpm2_immr;
-
-#define CPM_MAP_SIZE	(0x40000)	/* 256k - the PQ3 reserve this amount
-					   of space for CPM as it is larger
-					   than on PQ2 */
-
-void
-cpm2_reset(void)
-{
-	cpm2_immr = (cpm2_map_t *)ioremap(CPM_MAP_ADDR, CPM_MAP_SIZE);
-
-	/* Reclaim the DP memory for our use.
-	 */
-	cpm2_dpinit();
-
-	/* Tell everyone where the comm processor resides.
-	 */
-	cpmp = &cpm2_immr->im_cpm;
-}
-
-/* Set a baud rate generator.  This needs lots of work.  There are
- * eight BRGs, which can be connected to the CPM channels or output
- * as clocks.  The BRGs are in two different block of internal
- * memory mapped space.
- * The baud rate clock is the system clock divided by something.
- * It was set up long ago during the initial boot phase and is
- * is given to us.
- * Baud rate clocks are zero-based in the driver code (as that maps
- * to port numbers).  Documentation uses 1-based numbering.
- */
-#define BRG_INT_CLK	(((bd_t *)__res)->bi_brgfreq)
-#define BRG_UART_CLK	(BRG_INT_CLK/16)
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-cpm_setbrg(uint brg, uint rate)
-{
-	volatile uint	*bp;
-
-	/* This is good enough to get SMCs running.....
-	*/
-	if (brg < 4) {
-		bp = (uint *)&cpm2_immr->im_brgc1;
-	}
-	else {
-		bp = (uint *)&cpm2_immr->im_brgc5;
-		brg -= 4;
-	}
-	bp += brg;
-	*bp = ((BRG_UART_CLK / rate) << 1) | CPM_BRG_EN;
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-cpm2_fastbrg(uint brg, uint rate, int div16)
-{
-	volatile uint	*bp;
-
-	if (brg < 4) {
-		bp = (uint *)&cpm2_immr->im_brgc1;
-	}
-	else {
-		bp = (uint *)&cpm2_immr->im_brgc5;
-		brg -= 4;
-	}
-	bp += brg;
-	*bp = ((BRG_INT_CLK / rate) << 1) | CPM_BRG_EN;
-	if (div16)
-		*bp |= CPM_BRG_DIV16;
-}
-
-/*
- * dpalloc / dpfree bits.
- */
-static spinlock_t cpm_dpmem_lock;
-/* 16 blocks should be enough to satisfy all requests
- * until the memory subsystem goes up... */
-static rh_block_t cpm_boot_dpmem_rh_block[16];
-static rh_info_t cpm_dpmem_info;
-
-static void cpm2_dpinit(void)
-{
-	spin_lock_init(&cpm_dpmem_lock);
-
-	/* initialize the info header */
-	rh_init(&cpm_dpmem_info, 1,
-			sizeof(cpm_boot_dpmem_rh_block) /
-			sizeof(cpm_boot_dpmem_rh_block[0]),
-			cpm_boot_dpmem_rh_block);
-
-	/* Attach the usable dpmem area */
-	/* XXX: This is actually crap. CPM_DATAONLY_BASE and
-	 * CPM_DATAONLY_SIZE is only a subset of the available dpram. It
-	 * varies with the processor and the microcode patches activated.
-	 * But the following should be at least safe.
-	 */
-	rh_attach_region(&cpm_dpmem_info, CPM_DATAONLY_BASE, CPM_DATAONLY_SIZE);
-}
-
-/* This function returns an index into the DPRAM area.
- */
-unsigned long cpm_dpalloc(uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc(&cpm_dpmem_info, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc);
-
-int cpm_dpfree(unsigned long offset)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	ret = rh_free(&cpm_dpmem_info, offset);
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return ret;
-}
-EXPORT_SYMBOL(cpm_dpfree);
-
-/* not sure if this is ever needed */
-unsigned long cpm_dpalloc_fixed(unsigned long offset, uint size, uint align)
-{
-	unsigned long start;
-	unsigned long flags;
-
-	spin_lock_irqsave(&cpm_dpmem_lock, flags);
-	cpm_dpmem_info.alignment = align;
-	start = rh_alloc_fixed(&cpm_dpmem_info, offset, size, "commproc");
-	spin_unlock_irqrestore(&cpm_dpmem_lock, flags);
-
-	return start;
-}
-EXPORT_SYMBOL(cpm_dpalloc_fixed);
-
-void cpm_dpdump(void)
-{
-	rh_dump(&cpm_dpmem_info);
-}
-EXPORT_SYMBOL(cpm_dpdump);
-
-void *cpm_dpram_addr(unsigned long offset)
-{
-	return (void *)&cpm2_immr->im_dprambase[offset];
-}
-EXPORT_SYMBOL(cpm_dpram_addr);
diff --git a/arch/ppc/syslib/cpm2_pic.c b/arch/ppc/syslib/cpm2_pic.c
deleted file mode 100644
index fb2d5842641a..000000000000
--- a/arch/ppc/syslib/cpm2_pic.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/* The CPM2 internal interrupt controller.  It is usually
- * the only interrupt controller.
- * There are two 32-bit registers (high/low) for up to 64
- * possible interrupts.
- *
- * Now, the fun starts.....Interrupt Numbers DO NOT MAP
- * in a simple arithmetic fashion to mask or pending registers.
- * That is, interrupt 4 does not map to bit position 4.
- * We create two tables, indexed by vector number, to indicate
- * which register to use and which bit in the register to use.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/irq.h>
-
-#include <asm/immap_cpm2.h>
-#include <asm/mpc8260.h>
-
-#include "cpm2_pic.h"
-
-static	u_char	irq_to_siureg[] = {
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	1, 1, 1, 1, 1, 1, 1, 1,
-	0, 0, 0, 0, 0, 0, 0, 0,
-	0, 0, 0, 0, 0, 0, 0, 0
-};
-
-/* bit numbers do not match the docs, these are precomputed so the bit for
- * a given irq is (1 << irq_to_siubit[irq]) */
-static	u_char	irq_to_siubit[] = {
-	 0, 15, 14, 13, 12, 11, 10,  9,
-	 8,  7,  6,  5,  4,  3,  2,  1,
-	 2,  1,  0, 14, 13, 12, 11, 10,
-	 9,  8,  7,  6,  5,  4,  3,  0,
-	31, 30, 29, 28, 27, 26, 25, 24,
-	23, 22, 21, 20, 19, 18, 17, 16,
-	16, 17, 18, 19, 20, 21, 22, 23,
-	24, 25, 26, 27, 28, 29, 30, 31,
-};
-
-static void cpm2_mask_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-	volatile uint	*simr;
-
-	irq_nr -= CPM_IRQ_OFFSET;
-
-	bit = irq_to_siubit[irq_nr];
-	word = irq_to_siureg[irq_nr];
-
-	simr = &(cpm2_immr->im_intctl.ic_simrh);
-	ppc_cached_irq_mask[word] &= ~(1 << bit);
-	simr[word] = ppc_cached_irq_mask[word];
-}
-
-static void cpm2_unmask_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-	volatile uint	*simr;
-
-	irq_nr -= CPM_IRQ_OFFSET;
-
-	bit = irq_to_siubit[irq_nr];
-	word = irq_to_siureg[irq_nr];
-
-	simr = &(cpm2_immr->im_intctl.ic_simrh);
-	ppc_cached_irq_mask[word] |= 1 << bit;
-	simr[word] = ppc_cached_irq_mask[word];
-}
-
-static void cpm2_mask_and_ack(unsigned int irq_nr)
-{
-	int	bit, word;
-	volatile uint	*simr, *sipnr;
-
-	irq_nr -= CPM_IRQ_OFFSET;
-
-	bit = irq_to_siubit[irq_nr];
-	word = irq_to_siureg[irq_nr];
-
-	simr = &(cpm2_immr->im_intctl.ic_simrh);
-	sipnr = &(cpm2_immr->im_intctl.ic_sipnrh);
-	ppc_cached_irq_mask[word] &= ~(1 << bit);
-	simr[word] = ppc_cached_irq_mask[word];
-	sipnr[word] = 1 << bit;
-}
-
-static void cpm2_end_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-	volatile uint	*simr;
-
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-			&& irq_desc[irq_nr].action) {
-
-		irq_nr -= CPM_IRQ_OFFSET;
-		bit = irq_to_siubit[irq_nr];
-		word = irq_to_siureg[irq_nr];
-
-		simr = &(cpm2_immr->im_intctl.ic_simrh);
-		ppc_cached_irq_mask[word] |= 1 << bit;
-		simr[word] = ppc_cached_irq_mask[word];
-		/*
-		 * Work around large numbers of spurious IRQs on PowerPC 82xx
-		 * systems.
-		 */
-		mb();
-	}
-}
-
-static struct hw_interrupt_type cpm2_pic = {
-	.typename = " CPM2 SIU ",
-	.enable = cpm2_unmask_irq,
-	.disable = cpm2_mask_irq,
-	.ack = cpm2_mask_and_ack,
-	.end = cpm2_end_irq,
-};
-
-int cpm2_get_irq(void)
-{
-	int irq;
-        unsigned long bits;
-
-        /* For CPM2, read the SIVEC register and shift the bits down
-         * to get the irq number.         */
-        bits = cpm2_immr->im_intctl.ic_sivec;
-        irq = bits >> 26;
-
-	if (irq == 0)
-		return(-1);
-	return irq+CPM_IRQ_OFFSET;
-}
-
-void cpm2_init_IRQ(void)
-{
-	int i;
-
-	/* Clear the CPM IRQ controller, in case it has any bits set
-	 * from the bootloader
-	 */
-
-	/* Mask out everything */
-	cpm2_immr->im_intctl.ic_simrh = 0x00000000;
-	cpm2_immr->im_intctl.ic_simrl = 0x00000000;
-	wmb();
-
-	/* Ack everything */
-	cpm2_immr->im_intctl.ic_sipnrh = 0xffffffff;
-	cpm2_immr->im_intctl.ic_sipnrl = 0xffffffff;
-	wmb();
-
-	/* Dummy read of the vector */
-	i = cpm2_immr->im_intctl.ic_sivec;
-	rmb();
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	cpm2_immr->im_intctl.ic_sicr = 0;
-	cpm2_immr->im_intctl.ic_scprrh = 0x05309770;
-	cpm2_immr->im_intctl.ic_scprrl = 0x05309770;
-
-
-	/* Enable chaining to OpenPIC, and make everything level
-	 */
-	for (i = 0; i < NR_CPM_INTS; i++) {
-		irq_desc[i+CPM_IRQ_OFFSET].chip = &cpm2_pic;
-		irq_desc[i+CPM_IRQ_OFFSET].status |= IRQ_LEVEL;
-	}
-}
diff --git a/arch/ppc/syslib/cpm2_pic.h b/arch/ppc/syslib/cpm2_pic.h
deleted file mode 100644
index 467339337a78..000000000000
--- a/arch/ppc/syslib/cpm2_pic.h
+++ /dev/null
@@ -1,8 +0,0 @@
-#ifndef _PPC_KERNEL_CPM2_H
-#define _PPC_KERNEL_CPM2_H
-
-extern int cpm2_get_irq(void);
-
-extern void cpm2_init_IRQ(void);
-
-#endif /* _PPC_KERNEL_CPM2_H */
diff --git a/arch/ppc/syslib/gen550.h b/arch/ppc/syslib/gen550.h
deleted file mode 100644
index 5254d3cdbca6..000000000000
--- a/arch/ppc/syslib/gen550.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * gen550 prototypes
- *
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * 2004 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-extern void gen550_progress(char *, unsigned short);
-extern void gen550_init(int, struct uart_port *);
-extern void gen550_kgdb_map_scc(void);
diff --git a/arch/ppc/syslib/gen550_dbg.c b/arch/ppc/syslib/gen550_dbg.c
deleted file mode 100644
index 9293f5c59099..000000000000
--- a/arch/ppc/syslib/gen550_dbg.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*
- * A library of polled 16550 serial routines.  These are intended to
- * be used to support progress messages, xmon, kgdb, etc. on a
- * variety of platforms.
- *
- * Adapted from lots of code ripped from the arch/ppc/boot/ polled
- * 16550 support.
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2002-2003 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/tty.h>		/* For linux/serial_core.h */
-#include <linux/serial_core.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-#include <asm/machdep.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-
-#define SERIAL_BAUD	9600
-
-/* SERIAL_PORT_DFNS is defined in <asm/serial.h> */
-#ifndef SERIAL_PORT_DFNS
-#define SERIAL_PORT_DFNS
-#endif
-
-static struct serial_state rs_table[RS_TABLE_SIZE] = {
-	SERIAL_PORT_DFNS	/* defined in <asm/serial.h> */
-};
-
-static void (*serial_outb)(unsigned long, unsigned char);
-static unsigned long (*serial_inb)(unsigned long);
-
-static int shift;
-
-unsigned long direct_inb(unsigned long addr)
-{
-	return readb((void __iomem *)addr);
-}
-
-void direct_outb(unsigned long addr, unsigned char val)
-{
-	writeb(val, (void __iomem *)addr);
-}
-
-unsigned long io_inb(unsigned long port)
-{
-	return inb(port);
-}
-
-void io_outb(unsigned long port, unsigned char val)
-{
-	outb(val, port);
-}
-
-unsigned long serial_init(int chan, void *ignored)
-{
-	unsigned long com_port;
-	unsigned char lcr, dlm;
-
-	/* We need to find out which type io we're expecting.  If it's
-	 * 'SERIAL_IO_PORT', we get an offset from the isa_io_base.
-	 * If it's 'SERIAL_IO_MEM', we can the exact location.  -- Tom */
-	switch (rs_table[chan].io_type) {
-		case SERIAL_IO_PORT:
-			com_port = rs_table[chan].port;
-			serial_outb = io_outb;
-			serial_inb = io_inb;
-			break;
-		case SERIAL_IO_MEM:
-			com_port = (unsigned long)rs_table[chan].iomem_base;
-			serial_outb = direct_outb;
-			serial_inb = direct_inb;
-			break;
-		default:
-			/* We can't deal with it. */
-			return -1;
-	}
-
-	/* How far apart the registers are. */
-	shift = rs_table[chan].iomem_reg_shift;
-
-	/* save the LCR */
-	lcr = serial_inb(com_port + (UART_LCR << shift));
-	
-	/* Access baud rate */
-	serial_outb(com_port + (UART_LCR << shift), UART_LCR_DLAB);
-	dlm = serial_inb(com_port + (UART_DLM << shift));
-
-	/*
-	 * Test if serial port is unconfigured
-	 * We assume that no-one uses less than 110 baud or
-	 * less than 7 bits per character these days.
-	 *  -- paulus.
-	 */
-	if ((dlm <= 4) && (lcr & 2)) {
-		/* port is configured, put the old LCR back */
-		serial_outb(com_port + (UART_LCR << shift), lcr);
-	}
-	else {
-		/* Input clock. */
-		serial_outb(com_port + (UART_DLL << shift),
-			(rs_table[chan].baud_base / SERIAL_BAUD) & 0xFF);
-		serial_outb(com_port + (UART_DLM << shift),
-				(rs_table[chan].baud_base / SERIAL_BAUD) >> 8);
-		/* 8 data, 1 stop, no parity */
-		serial_outb(com_port + (UART_LCR << shift), 0x03);
-		/* RTS/DTR */
-		serial_outb(com_port + (UART_MCR << shift), 0x03);
-
-		/* Clear & enable FIFOs */
-		serial_outb(com_port + (UART_FCR << shift), 0x07);
-	}
-
-	return (com_port);
-}
-
-void
-serial_putc(unsigned long com_port, unsigned char c)
-{
-	while ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_THRE) == 0)
-		;
-	serial_outb(com_port, c);
-}
-
-unsigned char
-serial_getc(unsigned long com_port)
-{
-	while ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) == 0)
-		;
-	return serial_inb(com_port);
-}
-
-int
-serial_tstc(unsigned long com_port)
-{
-	return ((serial_inb(com_port + (UART_LSR << shift)) & UART_LSR_DR) != 0);
-}
-
-void
-serial_close(unsigned long com_port)
-{
-}
-
-void
-gen550_init(int i, struct uart_port *serial_req)
-{
-	rs_table[i].io_type = serial_req->iotype;
-	rs_table[i].port = serial_req->iobase;
-	rs_table[i].iomem_base = serial_req->membase;
-	rs_table[i].iomem_reg_shift = serial_req->regshift;
-	rs_table[i].baud_base = serial_req->uartclk ? serial_req->uartclk / 16 : BASE_BAUD;
-}
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-void
-gen550_progress(char *s, unsigned short hex)
-{
-	volatile unsigned int progress_debugport;
-	volatile char c;
-
-	progress_debugport = serial_init(0, NULL);
-
-	serial_putc(progress_debugport, '\r');
-
-	while ((c = *s++) != 0)
-		serial_putc(progress_debugport, c);
-
-	serial_putc(progress_debugport, '\n');
-	serial_putc(progress_debugport, '\r');
-}
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
diff --git a/arch/ppc/syslib/gen550_kgdb.c b/arch/ppc/syslib/gen550_kgdb.c
deleted file mode 100644
index 987cc0414e6e..000000000000
--- a/arch/ppc/syslib/gen550_kgdb.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * Generic 16550 kgdb support intended to be useful on a variety
- * of platforms.  To enable this support, it is necessary to set
- * the CONFIG_GEN550 option.  Any virtual mapping of the serial
- * port(s) to be used can be accomplished by setting
- * ppc_md.early_serial_map to a platform-specific mapping function.
- *
- * Adapted from ppc4xx_kgdb.c.
- *
- * Author: Matt Porter <mporter@kernel.crashing.org>
- *
- * 2002-2004 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <asm/machdep.h>
-
-extern unsigned long serial_init(int, void *);
-extern unsigned long serial_getc(unsigned long);
-extern unsigned long serial_putc(unsigned long, unsigned char);
-
-#if defined(CONFIG_KGDB_TTYS0)
-#define KGDB_PORT 0
-#elif defined(CONFIG_KGDB_TTYS1)
-#define KGDB_PORT 1
-#elif defined(CONFIG_KGDB_TTYS2)
-#define KGDB_PORT 2
-#elif defined(CONFIG_KGDB_TTYS3)
-#define KGDB_PORT 3
-#else
-#error "invalid kgdb_tty port"
-#endif
-
-static volatile unsigned int kgdb_debugport;
-
-void putDebugChar(unsigned char c)
-{
-	if (kgdb_debugport == 0)
-		kgdb_debugport = serial_init(KGDB_PORT, NULL);
-
-	serial_putc(kgdb_debugport, c);
-}
-
-int getDebugChar(void)
-{
-	if (kgdb_debugport == 0)
-		kgdb_debugport = serial_init(KGDB_PORT, NULL);
-
-	return(serial_getc(kgdb_debugport));
-}
-
-void kgdb_interruptible(int enable)
-{
-	return;
-}
-
-void putDebugString(char* str)
-{
-	while (*str != '\0') {
-		putDebugChar(*str);
-		str++;
-	}
-	putDebugChar('\r');
-	return;
-}
-
-/*
- * Note: gen550_init() must be called already on the port we are going
- * to use.
- */
-void
-gen550_kgdb_map_scc(void)
-{
-	printk(KERN_DEBUG "kgdb init\n");
-	if (ppc_md.early_serial_map)
-		ppc_md.early_serial_map();
-	kgdb_debugport = serial_init(KGDB_PORT, NULL);
-}
diff --git a/arch/ppc/syslib/gt64260_pic.c b/arch/ppc/syslib/gt64260_pic.c
deleted file mode 100644
index 3b4fcca5d1e1..000000000000
--- a/arch/ppc/syslib/gt64260_pic.c
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * Interrupt controller support for Galileo's GT64260.
- *
- * Author: Chris Zankel <source@mvista.com>
- * Modified by: Mark A. Greer <mgreer@mvista.com>
- *
- * Based on sources from Rabeeh Khoury / Galileo Technology
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * This file contains the specific functions to support the GT64260
- * interrupt controller.
- *
- * The GT64260 has two main interrupt registers (high and low) that
- * summarizes the interrupts generated by the units of the GT64260.
- * Each bit is assigned to an interrupt number, where the low register
- * are assigned from IRQ0 to IRQ31 and the high cause register
- * from IRQ32 to IRQ63
- * The GPP (General Purpose Port) interrupts are assigned from IRQ64 (GPP0)
- * to IRQ95 (GPP31).
- * get_irq() returns the lowest interrupt number that is currently asserted.
- *
- * Note:
- *  - This driver does not initialize the GPP when used as an interrupt
- *    input.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/mv64x60.h>
-#include <asm/machdep.h>
-
-#define CPU_INTR_STR	"gt64260 cpu interface error"
-#define PCI0_INTR_STR	"gt64260 pci 0 error"
-#define PCI1_INTR_STR	"gt64260 pci 1 error"
-
-/* ========================== forward declaration ========================== */
-
-static void gt64260_unmask_irq(unsigned int);
-static void gt64260_mask_irq(unsigned int);
-
-/* ========================== local declarations =========================== */
-
-struct hw_interrupt_type gt64260_pic = {
-	.typename = " gt64260_pic ",
-	.enable   = gt64260_unmask_irq,
-	.disable  = gt64260_mask_irq,
-	.ack      = gt64260_mask_irq,
-	.end      = gt64260_unmask_irq,
-};
-
-u32 gt64260_irq_base = 0;	/* GT64260 handles the next 96 IRQs from here */
-
-static struct mv64x60_handle bh;
-
-/* gt64260_init_irq()
- *
- *  This function initializes the interrupt controller. It assigns
- *  all interrupts from IRQ0 to IRQ95 to the gt64260 interrupt controller.
- *
- * Note:
- *  We register all GPP inputs as interrupt source, but disable them.
- */
-void __init
-gt64260_init_irq(void)
-{
-	int i;
-
-	if (ppc_md.progress)
-		ppc_md.progress("gt64260_init_irq: enter", 0x0);
-
-	bh.v_base = mv64x60_get_bridge_vbase();
-
-	ppc_cached_irq_mask[0] = 0;
-	ppc_cached_irq_mask[1] = 0x0f000000;	/* Enable GPP intrs */
-	ppc_cached_irq_mask[2] = 0;
-
-	/* disable all interrupts and clear current interrupts */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, ppc_cached_irq_mask[2]);
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, 0);
-	mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO, ppc_cached_irq_mask[0]);
-	mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI, ppc_cached_irq_mask[1]);
-
-	/* use the gt64260 for all (possible) interrupt sources */
-	for (i = gt64260_irq_base; i < (gt64260_irq_base + 96); i++)
-		irq_desc[i].chip = &gt64260_pic;
-
-	if (ppc_md.progress)
-		ppc_md.progress("gt64260_init_irq: exit", 0x0);
-}
-
-/*
- * gt64260_get_irq()
- *
- *  This function returns the lowest interrupt number of all interrupts that
- *  are currently asserted.
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  int	<interrupt number> or -2 (bogus interrupt)
- */
-int
-gt64260_get_irq(void)
-{
-	int irq;
-	int irq_gpp;
-
-	irq = mv64x60_read(&bh, GT64260_IC_MAIN_CAUSE_LO);
-	irq = __ilog2((irq & 0x3dfffffe) & ppc_cached_irq_mask[0]);
-
-	if (irq == -1) {
-		irq = mv64x60_read(&bh, GT64260_IC_MAIN_CAUSE_HI);
-		irq = __ilog2((irq & 0x0f000db7) & ppc_cached_irq_mask[1]);
-
-		if (irq == -1)
-			irq = -2; /* bogus interrupt, should never happen */
-		else {
-			if (irq >= 24) {
-				irq_gpp = mv64x60_read(&bh,
-					MV64x60_GPP_INTR_CAUSE);
-				irq_gpp = __ilog2(irq_gpp &
-					ppc_cached_irq_mask[2]);
-
-				if (irq_gpp == -1)
-					irq = -2;
-				else {
-					irq = irq_gpp + 64;
-					mv64x60_write(&bh,
-						MV64x60_GPP_INTR_CAUSE,
-						~(1 << (irq - 64)));
-				}
-			} else
-				irq += 32;
-		}
-	}
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_CAUSE);
-
-	if (irq < 0)
-		return (irq);
-	else
-		return (gt64260_irq_base + irq);
-}
-
-/* gt64260_unmask_irq()
- *
- *  This function enables an interrupt.
- *
- * Input Variable(s):
- *  unsigned int	interrupt number (IRQ0...IRQ95).
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  void
- */
-static void
-gt64260_unmask_irq(unsigned int irq)
-{
-	irq -= gt64260_irq_base;
-
-	if (irq > 31)
-		if (irq > 63) /* unmask GPP irq */
-			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
-				ppc_cached_irq_mask[2] |= (1 << (irq - 64)));
-		else /* mask high interrupt register */
-			mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI,
-				ppc_cached_irq_mask[1] |= (1 << (irq - 32)));
-	else /* mask low interrupt register */
-		mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO,
-			ppc_cached_irq_mask[0] |= (1 << irq));
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	return;
-}
-
-/* gt64260_mask_irq()
- *
- *  This function disables the requested interrupt.
- *
- * Input Variable(s):
- *  unsigned int	interrupt number (IRQ0...IRQ95).
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  void
- */
-static void
-gt64260_mask_irq(unsigned int irq)
-{
-	irq -= gt64260_irq_base;
-
-	if (irq > 31)
-		if (irq > 63) /* mask GPP irq */
-			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
-				ppc_cached_irq_mask[2] &= ~(1 << (irq - 64)));
-		else /* mask high interrupt register */
-			mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_HI,
-				ppc_cached_irq_mask[1] &= ~(1 << (irq - 32)));
-	else /* mask low interrupt register */
-		mv64x60_write(&bh, GT64260_IC_CPU_INTR_MASK_LO,
-			ppc_cached_irq_mask[0] &= ~(1 << irq));
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	return;
-}
-
-static irqreturn_t
-gt64260_cpu_error_int_handler(int irq, void *dev_id)
-{
-	printk(KERN_ERR "gt64260_cpu_error_int_handler: %s 0x%08x\n",
-		"Error on CPU interface - Cause regiser",
-		mv64x60_read(&bh, MV64x60_CPU_ERR_CAUSE));
-	printk(KERN_ERR "\tCPU error register dump:\n");
-	printk(KERN_ERR "\tAddress low  0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_LO));
-	printk(KERN_ERR "\tAddress high 0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_HI));
-	printk(KERN_ERR "\tData low     0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_LO));
-	printk(KERN_ERR "\tData high    0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_HI));
-	printk(KERN_ERR "\tParity       0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_PARITY));
-	mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t
-gt64260_pci_error_int_handler(int irq, void *dev_id)
-{
-	u32 val;
-	unsigned int pci_bus = (unsigned int)dev_id;
-
-	if (pci_bus == 0) {	/* Error on PCI 0 */
-		val = mv64x60_read(&bh, MV64x60_PCI0_ERR_CAUSE);
-		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
-			"gt64260_pci_error_int_handler", pci_bus);
-		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
-		printk(KERN_ERR "\tCause register 0x%08x\n", val);
-		printk(KERN_ERR "\tAddress Low    0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_LO));
-		printk(KERN_ERR "\tAddress High   0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_HI));
-		printk(KERN_ERR "\tAttribute      0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_DATA_LO));
-		printk(KERN_ERR "\tCommand        0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_CMD));
-		mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, ~val);
-	}
-	if (pci_bus == 1) {	/* Error on PCI 1 */
-		val = mv64x60_read(&bh, MV64x60_PCI1_ERR_CAUSE);
-		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
-			"gt64260_pci_error_int_handler", pci_bus);
-		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
-		printk(KERN_ERR "\tCause register 0x%08x\n", val);
-		printk(KERN_ERR "\tAddress Low    0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_LO));
-		printk(KERN_ERR "\tAddress High   0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_HI));
-		printk(KERN_ERR "\tAttribute      0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_DATA_LO));
-		printk(KERN_ERR "\tCommand        0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_CMD));
-		mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, ~val);
-	}
-	return IRQ_HANDLED;
-}
-
-static int __init
-gt64260_register_hdlrs(void)
-{
-	int rc;
-
-	/* Register CPU interface error interrupt handler */
-	if ((rc = request_irq(MV64x60_IRQ_CPU_ERR,
-		gt64260_cpu_error_int_handler, IRQF_DISABLED, CPU_INTR_STR, 0)))
-		printk(KERN_WARNING "Can't register cpu error handler: %d", rc);
-
-	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0x000000fe);
-
-	/* Register PCI 0 error interrupt handler */
-	if ((rc = request_irq(MV64360_IRQ_PCI0, gt64260_pci_error_int_handler,
-		    IRQF_DISABLED, PCI0_INTR_STR, (void *)0)))
-		printk(KERN_WARNING "Can't register pci 0 error handler: %d",
-			rc);
-
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0x003c0c24);
-
-	/* Register PCI 1 error interrupt handler */
-	if ((rc = request_irq(MV64360_IRQ_PCI1, gt64260_pci_error_int_handler,
-		    IRQF_DISABLED, PCI1_INTR_STR, (void *)1)))
-		printk(KERN_WARNING "Can't register pci 1 error handler: %d",
-			rc);
-
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0x003c0c24);
-
-	return 0;
-}
-
-arch_initcall(gt64260_register_hdlrs);
diff --git a/arch/ppc/syslib/harrier.c b/arch/ppc/syslib/harrier.c
deleted file mode 100644
index 45b797b3a336..000000000000
--- a/arch/ppc/syslib/harrier.c
+++ /dev/null
@@ -1,300 +0,0 @@
-/*
- * Motorola MCG Harrier northbridge/memory controller support
- *
- * Author: Dale Farnsworth
- *         dale.farnsworth@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/harrier_defs.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/harrier.h>
-
-/* define defaults for inbound windows */
-#define HARRIER_ITAT_DEFAULT		(HARRIER_ITAT_ENA | \
-					 HARRIER_ITAT_MEM | \
-					 HARRIER_ITAT_WPE | \
-					 HARRIER_ITAT_GBL)
-
-#define HARRIER_MPAT_DEFAULT		(HARRIER_ITAT_ENA | \
-					 HARRIER_ITAT_MEM | \
-					 HARRIER_ITAT_WPE | \
-					 HARRIER_ITAT_GBL)
-
-/*
- * Initialize the inbound window size on a non-monarch harrier.
- */
-void __init harrier_setup_nonmonarch(uint ppc_reg_base, uint in0_size)
-{
-	u16 temps;
-	u32 temp;
-
-	if (in0_size > HARRIER_ITSZ_2GB) {
-		printk
-		    ("harrier_setup_nonmonarch: Invalid window size code %d\n",
-		     in0_size);
-		return;
-	}
-
-	/* Clear the PCI memory enable bit. If we don't, then when the
-	 * inbound windows are enabled below, the corresponding BARs will be
-	 * "live" and start answering to PCI memory reads from their default
-	 * addresses (0x0), which overlap with system RAM.
-	 */
-	temps = in_le16((u16 *) (ppc_reg_base +
-				 HARRIER_XCSR_CONFIG(PCI_COMMAND)));
-	temps &= ~(PCI_COMMAND_MEMORY);
-	out_le16((u16 *) (ppc_reg_base + HARRIER_XCSR_CONFIG(PCI_COMMAND)),
-		 temps);
-
-	/* Setup a non-prefetchable inbound window */
-	out_le32((u32 *) (ppc_reg_base +
-			  HARRIER_XCSR_CONFIG(HARRIER_ITSZ0_OFF)), in0_size);
-
-	temp = in_le32((u32 *) (ppc_reg_base +
-				HARRIER_XCSR_CONFIG(HARRIER_ITAT0_OFF)));
-	temp &= ~HARRIER_ITAT_PRE;
-	temp |= HARRIER_ITAT_DEFAULT;
-	out_le32((u32 *) (ppc_reg_base +
-			  HARRIER_XCSR_CONFIG(HARRIER_ITAT0_OFF)), temp);
-
-	/* Enable the message passing block */
-	temp = in_le32((u32 *) (ppc_reg_base +
-				HARRIER_XCSR_CONFIG(HARRIER_MPAT_OFF)));
-	temp |= HARRIER_MPAT_DEFAULT;
-	out_le32((u32 *) (ppc_reg_base +
-			  HARRIER_XCSR_CONFIG(HARRIER_MPAT_OFF)), temp);
-}
-
-void __init harrier_release_eready(uint ppc_reg_base)
-{
-	ulong temp;
-
-	/*
-	 * Set EREADY to allow the line to be pulled up after everyone is
-	 * ready.
-	 */
-	temp = in_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF));
-	temp |= HARRIER_EREADY;
-	out_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF), temp);
-}
-
-void __init harrier_wait_eready(uint ppc_reg_base)
-{
-	ulong temp;
-
-	/*
-	 * Poll the ERDYS line until it goes high to indicate that all
-	 * non-monarch PrPMCs are ready for bus enumeration (or that there are
-	 * no PrPMCs present).
-	 */
-
-	/* FIXME: Add a timeout of some kind to prevent endless waits. */
-	do {
-
-		temp = in_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF));
-
-	} while (!(temp & HARRIER_ERDYS));
-}
-
-/*
- * Initialize the Motorola MCG Harrier host bridge.
- *
- * This means setting up the PPC bus to PCI memory and I/O space mappings,
- * setting the PCI memory space address of the MPIC (mapped straight
- * through), and ioremap'ing the mpic registers.
- * 'OpenPIC_Addr' will be set correctly by this routine.
- * This routine will not change the PCI_CONFIG_ADDR or PCI_CONFIG_DATA
- * addresses and assumes that the mapping of PCI memory space back to system
- * memory is set up correctly by PPCBug.
- */
-int __init
-harrier_init(struct pci_controller *hose,
-	     uint ppc_reg_base,
-	     ulong processor_pci_mem_start,
-	     ulong processor_pci_mem_end,
-	     ulong processor_pci_io_start,
-	     ulong processor_pci_io_end, ulong processor_mpic_base)
-{
-	uint addr, offset;
-
-	/*
-	 * Some sanity checks...
-	 */
-	if (((processor_pci_mem_start & 0xffff0000) != processor_pci_mem_start)
-	    || ((processor_pci_io_start & 0xffff0000) !=
-		processor_pci_io_start)) {
-		printk("harrier_init: %s\n",
-		       "PPC to PCI mappings must start on 64 KB boundaries");
-		return -1;
-	}
-
-	if (((processor_pci_mem_end & 0x0000ffff) != 0x0000ffff) ||
-	    ((processor_pci_io_end & 0x0000ffff) != 0x0000ffff)) {
-		printk("harrier_init: PPC to PCI mappings %s\n",
-		       "must end just before a 64 KB boundaries");
-		return -1;
-	}
-
-	if (((processor_pci_mem_end - processor_pci_mem_start) !=
-	     (hose->mem_space.end - hose->mem_space.start)) ||
-	    ((processor_pci_io_end - processor_pci_io_start) !=
-	     (hose->io_space.end - hose->io_space.start))) {
-		printk("harrier_init: %s\n",
-		       "PPC and PCI memory or I/O space sizes don't match");
-		return -1;
-	}
-
-	if ((processor_mpic_base & 0xfffc0000) != processor_mpic_base) {
-		printk("harrier_init: %s\n",
-		       "MPIC address must start on 256 KB boundary");
-		return -1;
-	}
-
-	if ((pci_dram_offset & 0xffff0000) != pci_dram_offset) {
-		printk("harrier_init: %s\n",
-		       "pci_dram_offset must be multiple of 64 KB");
-		return -1;
-	}
-
-	/*
-	 * Program the OTAD/OTOF registers to set up the PCI Mem & I/O
-	 * space mappings.  These are the mappings going from the processor to
-	 * the PCI bus.
-	 *
-	 * Note: Don't need to 'AND' start/end addresses with 0xffff0000
-	 *       because sanity check above ensures that they are properly
-	 *       aligned.
-	 */
-
-	/* Set up PPC->PCI Mem mapping */
-	addr = processor_pci_mem_start | (processor_pci_mem_end >> 16);
-#ifdef CONFIG_HARRIER_STORE_GATHERING
-	offset = (hose->mem_space.start - processor_pci_mem_start) | 0x9a;
-#else
-	offset = (hose->mem_space.start - processor_pci_mem_start) | 0x92;
-#endif
-	out_be32((uint *) (ppc_reg_base + HARRIER_OTAD0_OFF), addr);
-	out_be32((uint *) (ppc_reg_base + HARRIER_OTOF0_OFF), offset);
-
-	/* Set up PPC->PCI I/O mapping -- Contiguous I/O space */
-	addr = processor_pci_io_start | (processor_pci_io_end >> 16);
-	offset = (hose->io_space.start - processor_pci_io_start) | 0x80;
-	out_be32((uint *) (ppc_reg_base + HARRIER_OTAD1_OFF), addr);
-	out_be32((uint *) (ppc_reg_base + HARRIER_OTOF1_OFF), offset);
-
-	/* Enable MPIC */
-	OpenPIC_Addr = (void *)processor_mpic_base;
-	addr = (processor_mpic_base >> 16) | 1;
-	out_be16((ushort *) (ppc_reg_base + HARRIER_MBAR_OFF), addr);
-	out_8((u_char *) (ppc_reg_base + HARRIER_MPIC_CSR_OFF),
-	      HARRIER_MPIC_OPI_ENABLE);
-
-	return 0;
-}
-
-/*
- * Find the amount of RAM present.
- * This assumes that PPCBug has initialized the memory controller (SMC)
- * on the Harrier correctly (i.e., it does no sanity checking).
- * It also assumes that the memory base registers are set to configure the
- * memory as contiguous starting with "RAM A BASE", "RAM B BASE", etc.
- * however, RAM base registers can be skipped (e.g. A, B, C are set,
- * D is skipped but E is set is okay).
- */
-#define	MB	(1024*1024UL)
-
-static uint harrier_size_table[] __initdata = {
-	0 * MB,			/* 0 ==>    0 MB */
-	32 * MB,		/* 1 ==>   32 MB */
-	64 * MB,		/* 2 ==>   64 MB */
-	64 * MB,		/* 3 ==>   64 MB */
-	128 * MB,		/* 4 ==>  128 MB */
-	128 * MB,		/* 5 ==>  128 MB */
-	128 * MB,		/* 6 ==>  128 MB */
-	256 * MB,		/* 7 ==>  256 MB */
-	256 * MB,		/* 8 ==>  256 MB */
-	256 * MB,		/* 9 ==>  256 MB */
-	512 * MB,		/* a ==>  512 MB */
-	512 * MB,		/* b ==>  512 MB */
-	512 * MB,		/* c ==>  512 MB */
-	1024 * MB,		/* d ==> 1024 MB */
-	1024 * MB,		/* e ==> 1024 MB */
-	2048 * MB,		/* f ==> 2048 MB */
-};
-
-/*
- * *** WARNING: You MUST have a BAT set up to map in the XCSR regs ***
- *
- * Read the memory controller's registers to determine the amount of system
- * memory.  Assumes that the memory controller registers are already mapped
- * into virtual memory--too early to use ioremap().
- */
-unsigned long __init harrier_get_mem_size(uint xcsr_base)
-{
-	ulong last_addr;
-	int i;
-	uint vend_dev_id;
-	uint *size_table;
-	uint val;
-	uint *csrp;
-	uint size;
-	int size_table_entries;
-
-	vend_dev_id = in_be32((uint *) xcsr_base + PCI_VENDOR_ID);
-
-	if (((vend_dev_id & 0xffff0000) >> 16) != PCI_VENDOR_ID_MOTOROLA) {
-		printk("harrier_get_mem_size: %s (0x%x)\n",
-		       "Not a Motorola Memory Controller", vend_dev_id);
-		return 0;
-	}
-
-	vend_dev_id &= 0x0000ffff;
-
-	if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_HARRIER) {
-		size_table = harrier_size_table;
-		size_table_entries = sizeof(harrier_size_table) /
-		    sizeof(harrier_size_table[0]);
-	} else {
-		printk("harrier_get_mem_size: %s (0x%x)\n",
-		       "Not a Harrier", vend_dev_id);
-		return 0;
-	}
-
-	last_addr = 0;
-
-	csrp = (uint *) (xcsr_base + HARRIER_SDBA_OFF);
-	for (i = 0; i < 8; i++) {
-		val = in_be32(csrp++);
-
-		if (val & 0x100) {	/* If enabled */
-			size = val >> HARRIER_SDB_SIZE_SHIFT;
-			size &= HARRIER_SDB_SIZE_MASK;
-			if (size >= size_table_entries) {
-				break;	/* Register not set correctly */
-			}
-			size = size_table[size];
-
-			val &= ~(size - 1);
-			val += size;
-
-			if (val > last_addr) {
-				last_addr = val;
-			}
-		}
-	}
-
-	return last_addr;
-}
diff --git a/arch/ppc/syslib/hawk_common.c b/arch/ppc/syslib/hawk_common.c
deleted file mode 100644
index 86821d8753ed..000000000000
--- a/arch/ppc/syslib/hawk_common.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * Common Motorola PowerPlus Platform--really Falcon/Raven or HAWK.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/pci.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/hawk.h>
-
-/*
- * The Falcon/Raven and HAWK has 4 sets of registers:
- *   1) PPC Registers which define the mappings from PPC bus to PCI bus,
- *      etc.
- *   2) PCI Registers which define the mappings from PCI bus to PPC bus and the
- *      MPIC base address.
- *   3) MPIC registers.
- *   4) System Memory Controller (SMC) registers.
- */
-
-/*
- * Initialize the Motorola MCG Raven or HAWK host bridge.
- *
- * This means setting up the PPC bus to PCI memory and I/O space mappings,
- * setting the PCI memory space address of the MPIC (mapped straight
- * through), and ioremap'ing the mpic registers.
- * This routine will set the PCI_CONFIG_ADDR or PCI_CONFIG_DATA
- * addresses based on the PCI I/O address that is passed in.
- * 'OpenPIC_Addr' will be set correctly by this routine.
- */
-int __init
-hawk_init(struct pci_controller *hose,
-	     uint ppc_reg_base,
-	     ulong processor_pci_mem_start,
-	     ulong processor_pci_mem_end,
-	     ulong processor_pci_io_start,
-	     ulong processor_pci_io_end,
-	     ulong processor_mpic_base)
-{
-	uint		addr, offset;
-
-	/*
-	 * Some sanity checks...
-	 */
-	if (((processor_pci_mem_start&0xffff0000) != processor_pci_mem_start) ||
-	    ((processor_pci_io_start &0xffff0000) != processor_pci_io_start)) {
-		printk("hawk_init: %s\n",
-			"PPC to PCI mappings must start on 64 KB boundaries");
-		return -1;
-	}
-
-	if (((processor_pci_mem_end  &0x0000ffff) != 0x0000ffff) ||
-	    ((processor_pci_io_end   &0x0000ffff) != 0x0000ffff)) {
-		printk("hawk_init: PPC to PCI mappings %s\n",
-			"must end just before a 64 KB boundaries");
-		return -1;
-	}
-
-	if (((processor_pci_mem_end - processor_pci_mem_start) !=
-	     (hose->mem_space.end - hose->mem_space.start)) ||
-	    ((processor_pci_io_end - processor_pci_io_start) !=
-	     (hose->io_space.end - hose->io_space.start))) {
-		printk("hawk_init: %s\n",
-			"PPC and PCI memory or I/O space sizes don't match");
-		return -1;
-	}
-
-	if ((processor_mpic_base & 0xfffc0000) != processor_mpic_base) {
-		printk("hawk_init: %s\n",
-			"MPIC address must start on 256 MB boundary");
-		return -1;
-	}
-
-	if ((pci_dram_offset & 0xffff0000) != pci_dram_offset) {
-		printk("hawk_init: %s\n",
-			"pci_dram_offset must be multiple of 64 KB");
-		return -1;
-	}
-
-	/*
-	 * Disable previous PPC->PCI mappings.
-	 */
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF0_OFF), 0x00000000);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF1_OFF), 0x00000000);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF2_OFF), 0x00000000);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF3_OFF), 0x00000000);
-
-	/*
-	 * Program the XSADD/XSOFF registers to set up the PCI Mem & I/O
-	 * space mappings.  These are the mappings going from the processor to
-	 * the PCI bus.
-	 *
-	 * Note: Don't need to 'AND' start/end addresses with 0xffff0000
-	 *	 because sanity check above ensures that they are properly
-	 *	 aligned.
-	 */
-
-	/* Set up PPC->PCI Mem mapping */
-	addr = processor_pci_mem_start | (processor_pci_mem_end >> 16);
-	offset = (hose->mem_space.start - processor_pci_mem_start) | 0xd2;
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD0_OFF), addr);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF0_OFF), offset);
-
-	/* Set up PPC->MPIC mapping on the bridge */
-	addr = processor_mpic_base |
-	        (((processor_mpic_base + HAWK_MPIC_SIZE) >> 16) - 1);
-	/* No write posting for this PCI Mem space */
-	offset = (hose->mem_space.start - processor_pci_mem_start) | 0xc2;
-
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD1_OFF), addr);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF1_OFF), offset);
-
-	/* Set up PPC->PCI I/O mapping -- Contiguous I/O space */
-	addr = processor_pci_io_start | (processor_pci_io_end >> 16);
-	offset = (hose->io_space.start - processor_pci_io_start) | 0xc0;
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSADD3_OFF), addr);
-	out_be32((uint *)(ppc_reg_base + HAWK_PPC_XSOFF3_OFF), offset);
-
-	hose->io_base_virt = (void *)ioremap(processor_pci_io_start,
-			(processor_pci_io_end - processor_pci_io_start + 1));
-
-	/*
-	 * Set up the indirect method of accessing PCI config space.
-	 * The PCI config addr/data pair based on start addr of PCI I/O space.
-	 */
-	setup_indirect_pci(hose,
-			   processor_pci_io_start + HAWK_PCI_CONFIG_ADDR_OFF,
-			   processor_pci_io_start + HAWK_PCI_CONFIG_DATA_OFF);
-
-	/*
-	 * Disable previous PCI->PPC mappings.
-	 */
-
-	/* XXXX Put in mappings from PCI bus to processor bus XXXX */
-
-	/*
-	 * Disable MPIC response to PCI I/O space (BAR 0).
-	 * Make MPIC respond to PCI Mem space at specified address.
-	 * (BAR 1).
-	 */
-	early_write_config_dword(hose,
-			         0,
-			         PCI_DEVFN(0,0),
-			         PCI_BASE_ADDRESS_0,
-			         0x00000000 | 0x1);
-
-	early_write_config_dword(hose,
-			         0,
-			         PCI_DEVFN(0,0),
-			         PCI_BASE_ADDRESS_1,
-			         (processor_mpic_base -
-				 processor_pci_mem_start + 
-				 hose->mem_space.start) | 0x0);
-
-	/* Map MPIC into virtual memory */
-	OpenPIC_Addr = ioremap(processor_mpic_base, HAWK_MPIC_SIZE);
-
-	return 0;
-}
-
-/*
- * Find the amount of RAM present.
- * This assumes that PPCBug has initialized the memory controller (SMC)
- * on the Falcon/HAWK correctly (i.e., it does no sanity checking).
- * It also assumes that the memory base registers are set to configure the
- * memory as contiguous starting with "RAM A BASE", "RAM B BASE", etc.
- * however, RAM base registers can be skipped (e.g. A, B, C are set,
- * D is skipped but E is set is okay).
- */
-#define	MB	(1024*1024)
-
-static uint reg_offset_table[] __initdata = {
-	HAWK_SMC_RAM_A_SIZE_REG_OFF,
-	HAWK_SMC_RAM_B_SIZE_REG_OFF,
-	HAWK_SMC_RAM_C_SIZE_REG_OFF,
-	HAWK_SMC_RAM_D_SIZE_REG_OFF,
-	HAWK_SMC_RAM_E_SIZE_REG_OFF,
-	HAWK_SMC_RAM_F_SIZE_REG_OFF,
-	HAWK_SMC_RAM_G_SIZE_REG_OFF,
-	HAWK_SMC_RAM_H_SIZE_REG_OFF
-};
-
-static uint falcon_size_table[] __initdata = {
-	   0 * MB, /* 0 ==>    0 MB */
-	  16 * MB, /* 1 ==>   16 MB */
-	  32 * MB, /* 2 ==>   32 MB */
-	  64 * MB, /* 3 ==>   64 MB */
-	 128 * MB, /* 4 ==>  128 MB */
-	 256 * MB, /* 5 ==>  256 MB */
-        1024 * MB, /* 6 ==> 1024 MB (1 GB) */
-};
-
-static uint hawk_size_table[] __initdata = {
-	  0 * MB, /* 0 ==>    0 MB */
-	 32 * MB, /* 1 ==>   32 MB */
-	 64 * MB, /* 2 ==>   64 MB */
-	 64 * MB, /* 3 ==>   64 MB */
-	128 * MB, /* 4 ==>  128 MB */
-	128 * MB, /* 5 ==>  128 MB */
-	128 * MB, /* 6 ==>  128 MB */
-	256 * MB, /* 7 ==>  256 MB */
-	256 * MB, /* 8 ==>  256 MB */
-	512 * MB, /* 9 ==>  512 MB */
-};
-
-/*
- * *** WARNING: You MUST have a BAT set up to map in the SMC regs ***
- *
- * Read the memory controller's registers to determine the amount of system
- * memory.  Assumes that the memory controller registers are already mapped
- * into virtual memory--too early to use ioremap().
- */
-unsigned long __init
-hawk_get_mem_size(uint smc_base)
-{
-	unsigned long	total;
-	int		i, size_table_entries, reg_limit;
-	uint		vend_dev_id;
-	uint		*size_table;
-	u_char		val;
-
-
-	vend_dev_id = in_be32((uint *)smc_base + PCI_VENDOR_ID);
-
-	if (((vend_dev_id & 0xffff0000) >> 16) != PCI_VENDOR_ID_MOTOROLA) {
-		printk("hawk_get_mem_size: %s (0x%x)\n",
-			"Not a Motorola Memory Controller", vend_dev_id);
-		return 0;
-	}
-
-	vend_dev_id &= 0x0000ffff;
-
-	if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_FALCON) {
-		size_table = falcon_size_table;
-		size_table_entries = sizeof(falcon_size_table) /
-				     sizeof(falcon_size_table[0]);
-
-		reg_limit = FALCON_SMC_REG_COUNT;
-	}
-	else if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_HAWK) {
-		size_table = hawk_size_table;
-		size_table_entries = sizeof(hawk_size_table) /
-				     sizeof(hawk_size_table[0]);
-		reg_limit = HAWK_SMC_REG_COUNT;
-	}
-	else {
-		printk("hawk_get_mem_size: %s (0x%x)\n",
-			"Not a Falcon or HAWK", vend_dev_id);
-		return 0;
-	}
-
-	total = 0;
-
-	/* Check every reg because PPCBug may skip some */
-	for (i=0; i<reg_limit; i++) {
-		val = in_8((u_char *)(smc_base + reg_offset_table[i]));
-
-		if (val & 0x80) {	/* If enabled */
-			val &= 0x0f;
-
-			/* Don't go past end of size_table */
-			if (val < size_table_entries) {
-				total += size_table[val];
-			}
-			else {	/* Register not set correctly */
-				break;
-			}
-		}
-	}
-
-	return total;
-}
-
-int __init
-hawk_mpic_init(unsigned int pci_mem_offset)
-{
-	unsigned short	devid;
-	unsigned int	pci_membase;
-
-	/* Check the first PCI device to see if it is a Raven or Hawk. */
-	early_read_config_word(0, 0, 0, PCI_DEVICE_ID, &devid);
-
-	switch (devid) {
-	case PCI_DEVICE_ID_MOTOROLA_RAVEN:
-	case PCI_DEVICE_ID_MOTOROLA_HAWK:
-		break;
-	default:
-		OpenPIC_Addr = NULL;
-		return 1;
-	}
-
-	/* Read the memory base register. */
-	early_read_config_dword(0, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
-
-	if (pci_membase == 0) {
-		OpenPIC_Addr = NULL;
-		return 1;
-	}
-
-	/* Map the MPIC registers to virtual memory. */
-	OpenPIC_Addr = ioremap(pci_membase + pci_mem_offset, 0x22000);
-
-	return 0;
-}
diff --git a/arch/ppc/syslib/i8259.c b/arch/ppc/syslib/i8259.c
deleted file mode 100644
index 559f27c6aefe..000000000000
--- a/arch/ppc/syslib/i8259.c
+++ /dev/null
@@ -1,213 +0,0 @@
-/*
- * i8259 interrupt controller driver.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <asm/io.h>
-#include <asm/i8259.h>
-
-static volatile void __iomem *pci_intack; /* RO, gives us the irq vector */
-
-static unsigned char cached_8259[2] = { 0xff, 0xff };
-#define cached_A1 (cached_8259[0])
-#define cached_21 (cached_8259[1])
-
-static DEFINE_SPINLOCK(i8259_lock);
-
-static int i8259_pic_irq_offset;
-
-/*
- * Acknowledge the IRQ using either the PCI host bridge's interrupt
- * acknowledge feature or poll.  How i8259_init() is called determines
- * which is called.  It should be noted that polling is broken on some
- * IBM and Motorola PReP boxes so we must use the int-ack feature on them.
- */
-int i8259_irq(void)
-{
-	int irq;
-
-	spin_lock(&i8259_lock);
-
-	/* Either int-ack or poll for the IRQ */
-	if (pci_intack)
-		irq = readb(pci_intack);
-	else {
-		/* Perform an interrupt acknowledge cycle on controller 1. */
-		outb(0x0C, 0x20);		/* prepare for poll */
-		irq = inb(0x20) & 7;
-		if (irq == 2 ) {
-			/*
-			 * Interrupt is cascaded so perform interrupt
-			 * acknowledge on controller 2.
-			 */
-			outb(0x0C, 0xA0);	/* prepare for poll */
-			irq = (inb(0xA0) & 7) + 8;
-		}
-	}
-
-	if (irq == 7) {
-		/*
-		 * This may be a spurious interrupt.
-		 *
-		 * Read the interrupt status register (ISR). If the most
-		 * significant bit is not set then there is no valid
-		 * interrupt.
-		 */
-		if (!pci_intack)
-			outb(0x0B, 0x20);	/* ISR register */
-		if(~inb(0x20) & 0x80)
-			irq = -1;
-	}
-
-	spin_unlock(&i8259_lock);
-	return irq + i8259_pic_irq_offset;
-}
-
-static void i8259_mask_and_ack_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-	irq_nr -= i8259_pic_irq_offset;
-	if (irq_nr > 7) {
-		cached_A1 |= 1 << (irq_nr-8);
-		inb(0xA1); 	/* DUMMY */
-		outb(cached_A1, 0xA1);
-		outb(0x20, 0xA0);	/* Non-specific EOI */
-		outb(0x20, 0x20);	/* Non-specific EOI to cascade */
-	} else {
-		cached_21 |= 1 << irq_nr;
-		inb(0x21); 	/* DUMMY */
-		outb(cached_21, 0x21);
-		outb(0x20, 0x20);	/* Non-specific EOI */
-	}
-	spin_unlock_irqrestore(&i8259_lock, flags);
-}
-
-static void i8259_set_irq_mask(int irq_nr)
-{
-	outb(cached_A1,0xA1);
-	outb(cached_21,0x21);
-}
-
-static void i8259_mask_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-	irq_nr -= i8259_pic_irq_offset;
-	if (irq_nr < 8)
-		cached_21 |= 1 << irq_nr;
-	else
-		cached_A1 |= 1 << (irq_nr-8);
-	i8259_set_irq_mask(irq_nr);
-	spin_unlock_irqrestore(&i8259_lock, flags);
-}
-
-static void i8259_unmask_irq(unsigned int irq_nr)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-	irq_nr -= i8259_pic_irq_offset;
-	if (irq_nr < 8)
-		cached_21 &= ~(1 << irq_nr);
-	else
-		cached_A1 &= ~(1 << (irq_nr-8));
-	i8259_set_irq_mask(irq_nr);
-	spin_unlock_irqrestore(&i8259_lock, flags);
-}
-
-static struct irq_chip i8259_pic = {
-	.typename	= " i8259    ",
-	.mask		= i8259_mask_irq,
-	.disable	= i8259_mask_irq,
-	.unmask		= i8259_unmask_irq,
-	.mask_ack	= i8259_mask_and_ack_irq,
-};
-
-static struct resource pic1_iores = {
-	.name = "8259 (master)",
-	.start = 0x20,
-	.end = 0x21,
-	.flags = IORESOURCE_BUSY,
-};
-
-static struct resource pic2_iores = {
-	.name = "8259 (slave)",
-	.start = 0xa0,
-	.end = 0xa1,
-	.flags = IORESOURCE_BUSY,
-};
-
-static struct resource pic_edgectrl_iores = {
-	.name = "8259 edge control",
-	.start = 0x4d0,
-	.end = 0x4d1,
-	.flags = IORESOURCE_BUSY,
-};
-
-static struct irqaction i8259_irqaction = {
-	.handler = no_action,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "82c59 secondary cascade",
-};
-
-/*
- * i8259_init()
- * intack_addr - PCI interrupt acknowledge (real) address which will return
- *               the active irq from the 8259
- */
-void __init i8259_init(unsigned long intack_addr, int offset)
-{
-	unsigned long flags;
-	int i;
-
-	spin_lock_irqsave(&i8259_lock, flags);
-	i8259_pic_irq_offset = offset;
-
-	/* init master interrupt controller */
-	outb(0x11, 0x20); /* Start init sequence */
-	outb(0x00, 0x21); /* Vector base */
-	outb(0x04, 0x21); /* edge tiggered, Cascade (slave) on IRQ2 */
-	outb(0x01, 0x21); /* Select 8086 mode */
-
-	/* init slave interrupt controller */
-	outb(0x11, 0xA0); /* Start init sequence */
-	outb(0x08, 0xA1); /* Vector base */
-	outb(0x02, 0xA1); /* edge triggered, Cascade (slave) on IRQ2 */
-	outb(0x01, 0xA1); /* Select 8086 mode */
-
-	/* always read ISR */
-	outb(0x0B, 0x20);
-	outb(0x0B, 0xA0);
-
-	/* Mask all interrupts */
-	outb(cached_A1, 0xA1);
-	outb(cached_21, 0x21);
-
-	spin_unlock_irqrestore(&i8259_lock, flags);
-
-	for (i = 0; i < NUM_ISA_INTERRUPTS; ++i) {
-		set_irq_chip_and_handler(offset + i, &i8259_pic,
-					 handle_level_irq);
-		irq_desc[offset + i].status |= IRQ_LEVEL;
-	}
-
-	/* reserve our resources */
-	setup_irq(offset + 2, &i8259_irqaction);
-	request_resource(&ioport_resource, &pic1_iores);
-	request_resource(&ioport_resource, &pic2_iores);
-	request_resource(&ioport_resource, &pic_edgectrl_iores);
-
-	if (intack_addr != 0)
-		pci_intack = ioremap(intack_addr, 1);
-
-}
diff --git a/arch/ppc/syslib/ibm440gp_common.c b/arch/ppc/syslib/ibm440gp_common.c
deleted file mode 100644
index a3927ec9b5d7..000000000000
--- a/arch/ppc/syslib/ibm440gp_common.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * PPC440GP system library
- *
- * Matt Porter <mporter@mvista.com>
- * Copyright 2002-2003 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/types.h>
-#include <asm/reg.h>
-#include <asm/ibm44x.h>
-#include <asm/mmu.h>
-
-/*
- * Calculate 440GP clocks
- */
-void __init ibm440gp_get_clocks(struct ibm44x_clocks* p,
-				unsigned int sys_clk,
-				unsigned int ser_clk)
-{
-	u32 cpc0_sys0 = mfdcr(DCRN_CPC0_SYS0);
-	u32 cpc0_cr0 = mfdcr(DCRN_CPC0_CR0);
-	u32 opdv = ((cpc0_sys0 >> 10) & 0x3) + 1;
-	u32 epdv = ((cpc0_sys0 >> 8) & 0x3) + 1;
-
-	if (cpc0_sys0 & 0x2){
-		/* Bypass system PLL */
-		p->cpu = p->plb = sys_clk;
-	}
-	else {
-		u32 fbdv, fwdva, fwdvb, m, vco;
-
-		fbdv = (cpc0_sys0 >> 18) & 0x0f;
-		if (!fbdv)
-			fbdv = 16;
-
-		fwdva = 8 - ((cpc0_sys0 >> 15) & 0x7);
-		fwdvb = 8 - ((cpc0_sys0 >> 12) & 0x7);
-
-    		/* Feedback path */	
-		if (cpc0_sys0 & 0x00000080){
-			/* PerClk */
-			m = fwdvb * opdv * epdv;
-		}
-		else {
-			/* CPU clock */
-			m = fbdv * fwdva;
-    		}
-		vco = sys_clk * m;
-		p->cpu = vco / fwdva;
-		p->plb = vco / fwdvb;
-	}
-
-	p->opb = p->plb / opdv;
-	p->ebc = p->opb / epdv;
-
-	if (cpc0_cr0 & 0x00400000){
-		/* External UART clock */
-		p->uart0 = p->uart1 = ser_clk;
-	}
-	else {
-		/* Internal UART clock */
-    		u32 uart_div = ((cpc0_cr0 >> 16) & 0x1f) + 1;
-		p->uart0 = p->uart1 = p->plb / uart_div;
-	}
-}
diff --git a/arch/ppc/syslib/ibm440gp_common.h b/arch/ppc/syslib/ibm440gp_common.h
deleted file mode 100644
index 94d7835038ad..000000000000
--- a/arch/ppc/syslib/ibm440gp_common.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * PPC440GP system library
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __PPC_SYSLIB_IBM440GP_COMMON_H
-#define __PPC_SYSLIB_IBM440GP_COMMON_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/init.h>
-#include <syslib/ibm44x_common.h>
-
-/*
- * Please, refer to the Figure 13.1 in 440GP user manual
- *
- * if internal UART clock is used, ser_clk is ignored
- */
-void ibm440gp_get_clocks(struct ibm44x_clocks*, unsigned int sys_clk,
-	unsigned int ser_clk) __init;
-
-#endif /* __ASSEMBLY__ */
-#endif /* __PPC_SYSLIB_IBM440GP_COMMON_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm440gx_common.c b/arch/ppc/syslib/ibm440gx_common.c
deleted file mode 100644
index 6ad52f4a26e1..000000000000
--- a/arch/ppc/syslib/ibm440gx_common.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * PPC440GX system library
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003 - 2006 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <asm/ibm44x.h>
-#include <asm/mmu.h>
-#include <asm/processor.h>
-#include <syslib/ibm440gx_common.h>
-
-/*
- * Calculate 440GX clocks
- */
-static inline u32 __fix_zero(u32 v, u32 def){
-	return v ? v : def;
-}
-
-void __init ibm440gx_get_clocks(struct ibm44x_clocks* p, unsigned int sys_clk,
-	unsigned int ser_clk)
-{
-	u32 pllc  = CPR_READ(DCRN_CPR_PLLC);
-	u32 plld  = CPR_READ(DCRN_CPR_PLLD);
-	u32 uart0 = SDR_READ(DCRN_SDR_UART0);
-	u32 uart1 = SDR_READ(DCRN_SDR_UART1);
-#ifdef CONFIG_440EP
-	u32 uart2 = SDR_READ(DCRN_SDR_UART2);
-	u32 uart3 = SDR_READ(DCRN_SDR_UART3);
-#endif
-
-	/* Dividers */
-	u32 fbdv   = __fix_zero((plld >> 24) & 0x1f, 32);
-	u32 fwdva  = __fix_zero((plld >> 16) & 0xf, 16);
-	u32 fwdvb  = __fix_zero((plld >> 8) & 7, 8);
-	u32 lfbdv  = __fix_zero(plld & 0x3f, 64);
-	u32 pradv0 = __fix_zero((CPR_READ(DCRN_CPR_PRIMAD) >> 24) & 7, 8);
-	u32 prbdv0 = __fix_zero((CPR_READ(DCRN_CPR_PRIMBD) >> 24) & 7, 8);
-	u32 opbdv0 = __fix_zero((CPR_READ(DCRN_CPR_OPBD) >> 24) & 3, 4);
-	u32 perdv0 = __fix_zero((CPR_READ(DCRN_CPR_PERD) >> 24) & 3, 4);
-
-	/* Input clocks for primary dividers */
-	u32 clk_a, clk_b;
-
-	if (pllc & 0x40000000){
-		u32 m;
-
-		/* Feedback path */
-		switch ((pllc >> 24) & 7){
-		case 0:
-			/* PLLOUTx */
-			m = ((pllc & 0x20000000) ? fwdvb : fwdva) * lfbdv;
-			break;
-		case 1:
-			/* CPU */
-			m = fwdva * pradv0;
-			break;
-		case 5:
-			/* PERClk */
-			m = fwdvb * prbdv0 * opbdv0 * perdv0;
-			break;
-		default:
-			printk(KERN_EMERG "invalid PLL feedback source\n");
-			goto bypass;
-		}
-		m *= fbdv;
-		p->vco = sys_clk * m;
-		clk_a = p->vco / fwdva;
-		clk_b = p->vco / fwdvb;
-	}
-	else {
-bypass:
-		/* Bypass system PLL */
-		p->vco = 0;
-		clk_a = clk_b = sys_clk;
-	}
-
-	p->cpu = clk_a / pradv0;
-	p->plb = clk_b / prbdv0;
-	p->opb = p->plb / opbdv0;
-	p->ebc = p->opb / perdv0;
-
-	/* UARTs clock */
-	if (uart0 & 0x00800000)
-		p->uart0 = ser_clk;
-	else
-		p->uart0 = p->plb / __fix_zero(uart0 & 0xff, 256);
-
-	if (uart1 & 0x00800000)
-		p->uart1 = ser_clk;
-	else
-		p->uart1 = p->plb / __fix_zero(uart1 & 0xff, 256);
-#ifdef CONFIG_440EP
-	if (uart2 & 0x00800000)
-		p->uart2 = ser_clk;
-	else
-		p->uart2 = p->plb / __fix_zero(uart2 & 0xff, 256);
-
-	if (uart3 & 0x00800000)
-		p->uart3 = ser_clk;
-	else
-		p->uart3 = p->plb / __fix_zero(uart3 & 0xff, 256);
-#endif
-}
-
-/* Issue L2C diagnostic command */
-static inline u32 l2c_diag(u32 addr)
-{
-	mtdcr(DCRN_L2C0_ADDR, addr);
-	mtdcr(DCRN_L2C0_CMD, L2C_CMD_DIAG);
-	while (!(mfdcr(DCRN_L2C0_SR) & L2C_SR_CC)) ;
-	return mfdcr(DCRN_L2C0_DATA);
-}
-
-static irqreturn_t l2c_error_handler(int irq, void* dev)
-{
-	u32 sr = mfdcr(DCRN_L2C0_SR);
-	if (sr & L2C_SR_CPE){
-		/* Read cache trapped address */
-		u32 addr = l2c_diag(0x42000000);
-		printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n", addr);
-	}
-	if (sr & L2C_SR_TPE){
-		/* Read tag trapped address */
-		u32 addr = l2c_diag(0x82000000) >> 16;
-		printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n", addr);
-	}
-
-	/* Clear parity errors */
-	if (sr & (L2C_SR_CPE | L2C_SR_TPE)){
-		mtdcr(DCRN_L2C0_ADDR, 0);
-		mtdcr(DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
-	} else
-		printk(KERN_EMERG "L2C: LRU error\n");
-
-	return IRQ_HANDLED;
-}
-
-/* Enable L2 cache */
-void __init ibm440gx_l2c_enable(void){
-	u32 r;
-	unsigned long flags;
-
-	/* Install error handler */
-	if (request_irq(87, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0){
-		printk(KERN_ERR "Cannot install L2C error handler, cache is not enabled\n");
-		return;
-	}
-
-	local_irq_save(flags);
-	asm volatile ("sync" ::: "memory");
-
-	/* Disable SRAM */
-	mtdcr(DCRN_SRAM0_DPC,   mfdcr(DCRN_SRAM0_DPC)   & ~SRAM_DPC_ENABLE);
-	mtdcr(DCRN_SRAM0_SB0CR, mfdcr(DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK);
-	mtdcr(DCRN_SRAM0_SB1CR, mfdcr(DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK);
-	mtdcr(DCRN_SRAM0_SB2CR, mfdcr(DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK);
-	mtdcr(DCRN_SRAM0_SB3CR, mfdcr(DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK);
-
-	/* Enable L2_MODE without ICU/DCU */
-	r = mfdcr(DCRN_L2C0_CFG) & ~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK);
-	r |= L2C_CFG_L2M | L2C_CFG_SS_256;
-	mtdcr(DCRN_L2C0_CFG, r);
-
-	mtdcr(DCRN_L2C0_ADDR, 0);
-
-	/* Hardware Clear Command */
-	mtdcr(DCRN_L2C0_CMD, L2C_CMD_HCC);
-	while (!(mfdcr(DCRN_L2C0_SR) & L2C_SR_CC)) ;
-
-	/* Clear Cache Parity and Tag Errors */
-	mtdcr(DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE);
-
-	/* Enable 64G snoop region starting at 0 */
-	r = mfdcr(DCRN_L2C0_SNP0) & ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
-	r |= L2C_SNP_SSR_32G | L2C_SNP_ESR;
-	mtdcr(DCRN_L2C0_SNP0, r);
-
-	r = mfdcr(DCRN_L2C0_SNP1) & ~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK);
-	r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR;
-	mtdcr(DCRN_L2C0_SNP1, r);
-
-	asm volatile ("sync" ::: "memory");
-
-	/* Enable ICU/DCU ports */
-	r = mfdcr(DCRN_L2C0_CFG);
-	r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM | L2C_CFG_TPEI
-		| L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM);
-	r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN
-		| L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM;
-	mtdcr(DCRN_L2C0_CFG, r);
-
-	asm volatile ("sync; isync" ::: "memory");
-	local_irq_restore(flags);
-}
-
-/* Disable L2 cache */
-void __init ibm440gx_l2c_disable(void){
-	u32 r;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	asm volatile ("sync" ::: "memory");
-
-	/* Disable L2C mode */
-	r = mfdcr(DCRN_L2C0_CFG) & ~(L2C_CFG_L2M | L2C_CFG_ICU | L2C_CFG_DCU);
-	mtdcr(DCRN_L2C0_CFG, r);
-
-	/* Enable SRAM */
-	mtdcr(DCRN_SRAM0_DPC, mfdcr(DCRN_SRAM0_DPC) | SRAM_DPC_ENABLE);
-	mtdcr(DCRN_SRAM0_SB0CR,
-	      SRAM_SBCR_BAS0 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
-	mtdcr(DCRN_SRAM0_SB1CR,
-	      SRAM_SBCR_BAS1 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
-	mtdcr(DCRN_SRAM0_SB2CR,
-	      SRAM_SBCR_BAS2 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
-	mtdcr(DCRN_SRAM0_SB3CR,
-	      SRAM_SBCR_BAS3 | SRAM_SBCR_BS_64KB | SRAM_SBCR_BU_RW);
-
-	asm volatile ("sync; isync" ::: "memory");
-	local_irq_restore(flags);
-}
-
-void __init ibm440gx_l2c_setup(struct ibm44x_clocks* p)
-{
-	/* Disable L2C on rev.A, rev.B and 800MHz version of rev.C,
-	   enable it on all other revisions
-	 */
-	if (strcmp(cur_cpu_spec->cpu_name, "440GX Rev. A") == 0 ||
-			strcmp(cur_cpu_spec->cpu_name, "440GX Rev. B") == 0
-			|| (strcmp(cur_cpu_spec->cpu_name, "440GX Rev. C")
-				== 0 && p->cpu > 667000000))
-		ibm440gx_l2c_disable();
-	else
-		ibm440gx_l2c_enable();
-}
-
-int __init ibm440gx_get_eth_grp(void)
-{
-	return (SDR_READ(DCRN_SDR_PFC1) & DCRN_SDR_PFC1_EPS) >> DCRN_SDR_PFC1_EPS_SHIFT;
-}
-
-void __init ibm440gx_set_eth_grp(int group)
-{
-	SDR_WRITE(DCRN_SDR_PFC1, (SDR_READ(DCRN_SDR_PFC1) & ~DCRN_SDR_PFC1_EPS) | (group << DCRN_SDR_PFC1_EPS_SHIFT));
-}
-
-void __init ibm440gx_tah_enable(void)
-{
-	/* Enable TAH0 and TAH1 */
-	SDR_WRITE(DCRN_SDR_MFR,SDR_READ(DCRN_SDR_MFR) &
-			~DCRN_SDR_MFR_TAH0);
-	SDR_WRITE(DCRN_SDR_MFR,SDR_READ(DCRN_SDR_MFR) &
-			~DCRN_SDR_MFR_TAH1);
-}
-
-int ibm440gx_show_cpuinfo(struct seq_file *m){
-
-	u32 l2c_cfg = mfdcr(DCRN_L2C0_CFG);
-	const char* s;
-	if (l2c_cfg & L2C_CFG_L2M){
-	    switch (l2c_cfg & (L2C_CFG_ICU | L2C_CFG_DCU)){
-		case L2C_CFG_ICU: s = "I-Cache only";    break;
-		case L2C_CFG_DCU: s = "D-Cache only";    break;
-		default:	  s = "I-Cache/D-Cache"; break;
-	    }
-	}
-	else
-	    s = "disabled";
-
-	seq_printf(m, "L2-Cache\t: %s (0x%08x 0x%08x)\n", s,
-	    l2c_cfg, mfdcr(DCRN_L2C0_SR));
-
-	return 0;
-}
-
-void __init ibm440gx_platform_init(unsigned long r3, unsigned long r4,
-				   unsigned long r5, unsigned long r6,
-				   unsigned long r7)
-{
-	/* Erratum 440_43 workaround, disable L1 cache parity checking */
-	if (!strcmp(cur_cpu_spec->cpu_name, "440GX Rev. C") ||
-	    !strcmp(cur_cpu_spec->cpu_name, "440GX Rev. F"))
-		mtspr(SPRN_CCR1, mfspr(SPRN_CCR1) | CCR1_DPC);
-
-	ibm44x_platform_init(r3, r4, r5, r6, r7);
-}
diff --git a/arch/ppc/syslib/ibm440gx_common.h b/arch/ppc/syslib/ibm440gx_common.h
deleted file mode 100644
index 8d6f203e7a1d..000000000000
--- a/arch/ppc/syslib/ibm440gx_common.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * PPC440GX system library
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __PPC_SYSLIB_IBM440GX_COMMON_H
-#define __PPC_SYSLIB_IBM440GX_COMMON_H
-
-#ifndef __ASSEMBLY__
-
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <syslib/ibm44x_common.h>
-
-/*
- * Please, refer to the Figure 14.1 in 440GX user manual
- *
- * if internal UART clock is used, ser_clk is ignored
- */
-void ibm440gx_get_clocks(struct ibm44x_clocks*, unsigned int sys_clk,
-	unsigned int ser_clk) __init;
-
-/* common 440GX platform init */
-void ibm440gx_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-			    unsigned long r6, unsigned long r7) __init;
-
-/* Enable L2 cache */
-void ibm440gx_l2c_enable(void) __init;
-
-/* Disable L2 cache */
-void ibm440gx_l2c_disable(void) __init;
-
-/* Enable/disable L2 cache for a particular chip revision */
-void ibm440gx_l2c_setup(struct ibm44x_clocks*) __init;
-
-/* Get Ethernet Group */
-int ibm440gx_get_eth_grp(void) __init;
-
-/* Set Ethernet Group */
-void ibm440gx_set_eth_grp(int group) __init;
-
-/* Enable TAH devices */
-void ibm440gx_tah_enable(void) __init;
-
-/* Add L2C info to /proc/cpuinfo */
-int ibm440gx_show_cpuinfo(struct seq_file*);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __PPC_SYSLIB_IBM440GX_COMMON_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm440sp_common.c b/arch/ppc/syslib/ibm440sp_common.c
deleted file mode 100644
index 571f8bcf78e6..000000000000
--- a/arch/ppc/syslib/ibm440sp_common.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * PPC440SP/PPC440SPe system library
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-
-#include <asm/param.h>
-#include <asm/ibm44x.h>
-#include <asm/mmu.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/ppc4xx_pic.h>
-
-/*
- * Read the 440SP memory controller to get size of system memory.
- */
-unsigned long __init ibm440sp_find_end_of_memory(void)
-{
-	u32 i;
-	u32 mem_size = 0;
-
-	/* Read two bank sizes and sum */
-	for (i=0; i< MQ0_NUM_BANKS; i++)
-		switch (mfdcr(DCRN_MQ0_BS0BAS + i) & MQ0_CONFIG_SIZE_MASK) {
-			case MQ0_CONFIG_SIZE_8M:
-				mem_size += PPC44x_MEM_SIZE_8M;
-				break;
-			case MQ0_CONFIG_SIZE_16M:
-				mem_size += PPC44x_MEM_SIZE_16M;
-				break;
-			case MQ0_CONFIG_SIZE_32M:
-				mem_size += PPC44x_MEM_SIZE_32M;
-				break;
-			case MQ0_CONFIG_SIZE_64M:
-				mem_size += PPC44x_MEM_SIZE_64M;
-				break;
-			case MQ0_CONFIG_SIZE_128M:
-				mem_size += PPC44x_MEM_SIZE_128M;
-				break;
-			case MQ0_CONFIG_SIZE_256M:
-				mem_size += PPC44x_MEM_SIZE_256M;
-				break;
-			case MQ0_CONFIG_SIZE_512M:
-				mem_size += PPC44x_MEM_SIZE_512M;
-				break;
-			case MQ0_CONFIG_SIZE_1G:
-				mem_size += PPC44x_MEM_SIZE_1G;
-				break;
-			case MQ0_CONFIG_SIZE_2G:
-				mem_size += PPC44x_MEM_SIZE_2G;
-				break;
-			default:
-				break;
-		}
-	return mem_size;
-}
diff --git a/arch/ppc/syslib/ibm440sp_common.h b/arch/ppc/syslib/ibm440sp_common.h
deleted file mode 100644
index 8077bf8ed118..000000000000
--- a/arch/ppc/syslib/ibm440sp_common.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * PPC440SP system library
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2004-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __PPC_SYSLIB_IBM440SP_COMMON_H
-#define __PPC_SYSLIB_IBM440SP_COMMON_H
-
-#ifndef __ASSEMBLY__
-
-extern unsigned long __init ibm440sp_find_end_of_memory(void);
-
-#endif /* __ASSEMBLY__ */
-#endif /* __PPC_SYSLIB_IBM440SP_COMMON_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm44x_common.c b/arch/ppc/syslib/ibm44x_common.c
deleted file mode 100644
index 01f99b4a6649..000000000000
--- a/arch/ppc/syslib/ibm44x_common.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * PPC44x system library
- *
- * Matt Porter <mporter@kernel.crashing.org>
- * Copyright 2002-2005 MontaVista Software Inc.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#include <linux/time.h>
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/module.h>
-#include <linux/initrd.h>
-
-#include <asm/ibm44x.h>
-#include <asm/mmu.h>
-#include <asm/machdep.h>
-#include <asm/time.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/param.h>
-#include <asm/bootinfo.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/gen550.h>
-
-/* Global Variables */
-bd_t __res;
-
-phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size)
-{
-	phys_addr_t page_4gb = 0;
-
-        /*
-	 * Trap the least significant 32-bit portions of an
-	 * address in the 440's 36-bit address space.  Fix
-	 * them up with the appropriate ERPN
-	 */
-	if ((addr >= PPC44x_IO_LO) && (addr <= PPC44x_IO_HI))
-		page_4gb = PPC44x_IO_PAGE;
-	else if ((addr >= PPC44x_PCI0CFG_LO) && (addr <= PPC44x_PCI0CFG_HI))
-		page_4gb = PPC44x_PCICFG_PAGE;
-#ifdef CONFIG_440SP
-	else if ((addr >= PPC44x_PCI1CFG_LO) && (addr <= PPC44x_PCI1CFG_HI))
-		page_4gb = PPC44x_PCICFG_PAGE;
-	else if ((addr >= PPC44x_PCI2CFG_LO) && (addr <= PPC44x_PCI2CFG_HI))
-		page_4gb = PPC44x_PCICFG_PAGE;
-#endif
-	else if ((addr >= PPC44x_PCIMEM_LO) && (addr <= PPC44x_PCIMEM_HI))
-		page_4gb = PPC44x_PCIMEM_PAGE;
-
-	return (page_4gb | addr);
-};
-EXPORT_SYMBOL(fixup_bigphys_addr);
-
-void __init ibm44x_calibrate_decr(unsigned int freq)
-{
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	/* Set the time base to zero */
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
-	/* Clear any pending timer interrupts */
-	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS);
-
-	/* Enable decrementer interrupt */
-	mtspr(SPRN_TCR, TCR_DIE);
-}
-
-extern void abort(void);
-
-static void ibm44x_restart(char *cmd)
-{
-	local_irq_disable();
-	abort();
-}
-
-static void ibm44x_power_off(void)
-{
-	local_irq_disable();
-	for(;;);
-}
-
-static void ibm44x_halt(void)
-{
-	local_irq_disable();
-	for(;;);
-}
-
-/*
- * Read the 44x memory controller to get size of system memory.
- */
-static unsigned long __init ibm44x_find_end_of_memory(void)
-{
-	u32 i, bank_config;
-	u32 mem_size = 0;
-
-	for (i=0; i<4; i++)
-	{
-		switch (i)
-		{
-			case 0:
-				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B0CR);
-				break;
-			case 1:
-				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B1CR);
-				break;
-			case 2:
-				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B2CR);
-				break;
-			case 3:
-				mtdcr(DCRN_SDRAM0_CFGADDR, SDRAM0_B3CR);
-				break;
-		}
-
-		bank_config = mfdcr(DCRN_SDRAM0_CFGDATA);
-
-		if (!(bank_config & SDRAM_CONFIG_BANK_ENABLE))
-			continue;
-		switch (SDRAM_CONFIG_BANK_SIZE(bank_config))
-		{
-			case SDRAM_CONFIG_SIZE_8M:
-				mem_size += PPC44x_MEM_SIZE_8M;
-				break;
-			case SDRAM_CONFIG_SIZE_16M:
-				mem_size += PPC44x_MEM_SIZE_16M;
-				break;
-			case SDRAM_CONFIG_SIZE_32M:
-				mem_size += PPC44x_MEM_SIZE_32M;
-				break;
-			case SDRAM_CONFIG_SIZE_64M:
-				mem_size += PPC44x_MEM_SIZE_64M;
-				break;
-			case SDRAM_CONFIG_SIZE_128M:
-				mem_size += PPC44x_MEM_SIZE_128M;
-				break;
-			case SDRAM_CONFIG_SIZE_256M:
-				mem_size += PPC44x_MEM_SIZE_256M;
-				break;
-			case SDRAM_CONFIG_SIZE_512M:
-				mem_size += PPC44x_MEM_SIZE_512M;
-				break;
-		}
-	}
-	return mem_size;
-}
-
-void __init ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-				 unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3)
-		__res = *(bd_t *)(r3 + KERNELBASE);
-
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/*
-	 * If the init RAM disk has been configured in, and there's a valid
-	 * starting address for it, set it up.
-	 */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif  /* CONFIG_BLK_DEV_INITRD */
-
-	/* Copy the kernel command line arguments to a safe place. */
-
-	if (r6) {
-		*(char *) (r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-	}
-
-	ppc_md.init_IRQ = ppc4xx_pic_init;
-	ppc_md.find_end_of_memory = ibm44x_find_end_of_memory;
-	ppc_md.restart = ibm44x_restart;
-	ppc_md.power_off = ibm44x_power_off;
-	ppc_md.halt = ibm44x_halt;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
-#ifdef CONFIG_KGDB
-	ppc_md.kgdb_map_scc = gen550_kgdb_map_scc;
-#endif
-
-	/*
-	 * The Abatron BDI JTAG debugger does not tolerate others
-	 * mucking with the debug registers.
-	 */
-#if !defined(CONFIG_BDI_SWITCH)
-	/* Enable internal debug mode */
-        mtspr(SPRN_DBCR0, (DBCR0_IDM));
-
-	/* Clear any residual debug events */
-	mtspr(SPRN_DBSR, 0xffffffff);
-#endif
-}
-
-/* Called from machine_check_exception */
-void platform_machine_check(struct pt_regs *regs)
-{
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-	printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x%08x\n",
-	       mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
-	       mfdcr(DCRN_PLB0_ACR), mfdcr(DCRN_PLB0_BESRH),
-	       mfdcr(DCRN_PLB0_BESRL));
-	printk("PLB1: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x%08x\n",
-	       mfdcr(DCRN_PLB1_BEARH), mfdcr(DCRN_PLB1_BEARL),
-	       mfdcr(DCRN_PLB1_ACR), mfdcr(DCRN_PLB1_BESRH),
-	       mfdcr(DCRN_PLB1_BESRL));
-#else
-    	printk("PLB0: BEAR=0x%08x%08x ACR=  0x%08x BESR= 0x%08x\n",
-		mfdcr(DCRN_PLB0_BEARH), mfdcr(DCRN_PLB0_BEARL),
-		mfdcr(DCRN_PLB0_ACR),  mfdcr(DCRN_PLB0_BESR));
-#endif
-	printk("POB0: BEAR=0x%08x%08x BESR0=0x%08x BESR1=0x%08x\n",
-		mfdcr(DCRN_POB0_BEARH), mfdcr(DCRN_POB0_BEARL),
-		mfdcr(DCRN_POB0_BESR0), mfdcr(DCRN_POB0_BESR1));
-	printk("OPB0: BEAR=0x%08x%08x BSTAT=0x%08x\n",
-		mfdcr(DCRN_OPB0_BEARH), mfdcr(DCRN_OPB0_BEARL),
-		mfdcr(DCRN_OPB0_BSTAT));
-}
diff --git a/arch/ppc/syslib/ibm44x_common.h b/arch/ppc/syslib/ibm44x_common.h
deleted file mode 100644
index f179db8634e0..000000000000
--- a/arch/ppc/syslib/ibm44x_common.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * PPC44x system library
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2003, 2004 Zultys Technologies
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- */
-#ifdef __KERNEL__
-#ifndef __PPC_SYSLIB_IBM44x_COMMON_H
-#define __PPC_SYSLIB_IBM44x_COMMON_H
-
-#ifndef __ASSEMBLY__
-
-/*
- * All clocks are in Hz
- */
-struct ibm44x_clocks {
-	unsigned int vco;	/* VCO, 0 if system PLL is bypassed */
-	unsigned int cpu;	/* CPUCoreClk */
-	unsigned int plb;	/* PLBClk */
-	unsigned int opb;	/* OPBClk */
-	unsigned int ebc;	/* PerClk */
-	unsigned int uart0;
-	unsigned int uart1;
-#ifdef CONFIG_440EP
-	unsigned int uart2;
-	unsigned int uart3;
-#endif
-};
-
-/* common 44x platform init */
-void ibm44x_platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-			  unsigned long r6, unsigned long r7) __init;
-
-/* initialize decrementer and tick-related variables */
-void ibm44x_calibrate_decr(unsigned int freq) __init;
-
-#endif /* __ASSEMBLY__ */
-#endif /* __PPC_SYSLIB_IBM44x_COMMON_H */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/syslib/ibm_ocp.c b/arch/ppc/syslib/ibm_ocp.c
deleted file mode 100644
index 2ee176610e7c..000000000000
--- a/arch/ppc/syslib/ibm_ocp.c
+++ /dev/null
@@ -1,10 +0,0 @@
-#include <linux/module.h>
-#include <asm/ibm4xx.h>
-#include <asm/ocp.h>
-
-struct ocp_sys_info_data ocp_sys_info = {
-	.opb_bus_freq	=	50000000,	/* OPB Bus Frequency (Hz) */
-	.ebc_bus_freq	=	33333333,	/* EBC Bus Frequency (Hz) */
-};
-
-EXPORT_SYMBOL(ocp_sys_info);
diff --git a/arch/ppc/syslib/indirect_pci.c b/arch/ppc/syslib/indirect_pci.c
deleted file mode 100644
index 83b323a7d029..000000000000
--- a/arch/ppc/syslib/indirect_pci.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * Support for indirect PCI bridges.
- *
- * Copyright (C) 1998 Gabriel Paubert.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-
-#ifdef CONFIG_PPC_INDIRECT_PCI_BE
-#define PCI_CFG_OUT out_be32
-#else
-#define PCI_CFG_OUT out_le32
-#endif
-
-static int
-indirect_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		     int len, u32 *val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	volatile void __iomem *cfg_data;
-	u8 cfg_type = 0;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (hose->set_cfg_type)
-		if (bus->number != hose->first_busno)
-			cfg_type = 1;
-
-	PCI_CFG_OUT(hose->cfg_addr,
-		 (0x80000000 | ((bus->number - hose->bus_offset) << 16)
-		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + (offset & 3);
-	switch (len) {
-	case 1:
-		*val = in_8(cfg_data);
-		break;
-	case 2:
-		*val = in_le16(cfg_data);
-		break;
-	default:
-		*val = in_le32(cfg_data);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-indirect_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		      int len, u32 val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	volatile void __iomem *cfg_data;
-	u8 cfg_type = 0;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (hose->set_cfg_type)
-		if (bus->number != hose->first_busno)
-			cfg_type = 1;
-
-	PCI_CFG_OUT(hose->cfg_addr,
-		 (0x80000000 | ((bus->number - hose->bus_offset) << 16)
-		  | (devfn << 8) | ((offset & 0xfc) | cfg_type)));
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	cfg_data = hose->cfg_data + (offset & 3);
-	switch (len) {
-	case 1:
-		out_8(cfg_data, val);
-		break;
-	case 2:
-		out_le16(cfg_data, val);
-		break;
-	default:
-		out_le32(cfg_data, val);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops indirect_pci_ops =
-{
-	indirect_read_config,
-	indirect_write_config
-};
-
-void __init
-setup_indirect_pci_nomap(struct pci_controller* hose, void __iomem * cfg_addr,
-	void __iomem * cfg_data)
-{
-	hose->cfg_addr = cfg_addr;
-	hose->cfg_data = cfg_data;
-	hose->ops = &indirect_pci_ops;
-}
-
-void __init
-setup_indirect_pci(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
-{
-	unsigned long base = cfg_addr & PAGE_MASK;
-	void __iomem *mbase, *addr, *data;
-
-	mbase = ioremap(base, PAGE_SIZE);
-	addr = mbase + (cfg_addr & ~PAGE_MASK);
-	if ((cfg_data & PAGE_MASK) != base)
-		mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
-	data = mbase + (cfg_data & ~PAGE_MASK);
-	setup_indirect_pci_nomap(hose, addr, data);
-}
diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c
deleted file mode 100644
index ebb8c8f8f30c..000000000000
--- a/arch/ppc/syslib/m8260_pci_erratum9.c
+++ /dev/null
@@ -1,455 +0,0 @@
-/*
- * Workaround for device erratum PCI 9.
- * See Motorola's "XPC826xA Family Device Errata Reference."
- * The erratum applies to all 8260 family Hip4 processors.  It is scheduled 
- * to be fixed in HiP4 Rev C.  Erratum PCI 9 states that a simultaneous PCI 
- * inbound write transaction and PCI outbound read transaction can result in a 
- * bus deadlock.  The suggested workaround is to use the IDMA controller to 
- * perform all reads from PCI configuration, memory, and I/O space.
- *
- * Author:  andy_lowe@mvista.com
- *
- * 2003 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/io.h>
-#include <asm/pci-bridge.h>
-#include <asm/machdep.h>
-#include <asm/byteorder.h>
-#include <asm/mpc8260.h>
-#include <asm/immap_cpm2.h>
-#include <asm/cpm2.h>
-
-#include "m82xx_pci.h"
-
-#ifdef CONFIG_8260_PCI9
-/*#include <asm/mpc8260_pci9.h>*/ /* included in asm/io.h */
-
-#define IDMA_XFER_BUF_SIZE 64	/* size of the IDMA transfer buffer */
-
-/* define a structure for the IDMA dpram usage */
-typedef struct idma_dpram_s {
-	idma_t pram;				/* IDMA parameter RAM */
-	u_char xfer_buf[IDMA_XFER_BUF_SIZE];	/* IDMA transfer buffer */
-	idma_bd_t bd;				/* buffer descriptor */
-} idma_dpram_t;
-
-/* define offsets relative to start of IDMA dpram */
-#define IDMA_XFER_BUF_OFFSET (sizeof(idma_t))
-#define IDMA_BD_OFFSET (sizeof(idma_t) + IDMA_XFER_BUF_SIZE)
-
-/* define globals */
-static volatile idma_dpram_t *idma_dpram;
-
-/* Exactly one of CONFIG_8260_PCI9_IDMAn must be defined, 
- * where n is 1, 2, 3, or 4.  This selects the IDMA channel used for 
- * the PCI9 workaround.
- */
-#ifdef CONFIG_8260_PCI9_IDMA1
-#define IDMA_CHAN 0
-#define PROFF_IDMA PROFF_IDMA1_BASE
-#define IDMA_PAGE CPM_CR_IDMA1_PAGE
-#define IDMA_SBLOCK CPM_CR_IDMA1_SBLOCK
-#endif
-#ifdef CONFIG_8260_PCI9_IDMA2
-#define IDMA_CHAN 1
-#define PROFF_IDMA PROFF_IDMA2_BASE
-#define IDMA_PAGE CPM_CR_IDMA2_PAGE
-#define IDMA_SBLOCK CPM_CR_IDMA2_SBLOCK
-#endif
-#ifdef CONFIG_8260_PCI9_IDMA3
-#define IDMA_CHAN 2
-#define PROFF_IDMA PROFF_IDMA3_BASE
-#define IDMA_PAGE CPM_CR_IDMA3_PAGE
-#define IDMA_SBLOCK CPM_CR_IDMA3_SBLOCK
-#endif
-#ifdef CONFIG_8260_PCI9_IDMA4
-#define IDMA_CHAN 3
-#define PROFF_IDMA PROFF_IDMA4_BASE
-#define IDMA_PAGE CPM_CR_IDMA4_PAGE
-#define IDMA_SBLOCK CPM_CR_IDMA4_SBLOCK
-#endif
-
-void idma_pci9_init(void)
-{
-	uint dpram_offset;
-	volatile idma_t *pram;
-	volatile im_idma_t *idma_reg;
-	volatile cpm2_map_t *immap = cpm2_immr;
-
-	/* allocate IDMA dpram */
-	dpram_offset = cpm_dpalloc(sizeof(idma_dpram_t), 64);
-	idma_dpram = cpm_dpram_addr(dpram_offset); 
-
-	/* initialize the IDMA parameter RAM */
-	memset((void *)idma_dpram, 0, sizeof(idma_dpram_t));
-	pram = &idma_dpram->pram;
-	pram->ibase = dpram_offset + IDMA_BD_OFFSET;
-	pram->dpr_buf = dpram_offset + IDMA_XFER_BUF_OFFSET;
-	pram->ss_max = 32;
-	pram->dts = 32;
-
-	/* initialize the IDMA_BASE pointer to the IDMA parameter RAM */
-	*((ushort *) &immap->im_dprambase[PROFF_IDMA]) = dpram_offset;
-
-	/* initialize the IDMA registers */
-	idma_reg = (volatile im_idma_t *) &immap->im_sdma.sdma_idsr1;
-	idma_reg[IDMA_CHAN].idmr = 0;		/* mask all IDMA interrupts */
-	idma_reg[IDMA_CHAN].idsr = 0xff;	/* clear all event flags */
-
-	printk(KERN_WARNING
-		"Using IDMA%d for MPC8260 device erratum PCI 9 workaround\n",
-		IDMA_CHAN + 1);
-
-	return;
-}
-
-/* Use the IDMA controller to transfer data from I/O memory to local RAM.
- * The src address must be a physical address suitable for use by the DMA 
- * controller with no translation.  The dst address must be a kernel virtual 
- * address.  The dst address is translated to a physical address via 
- * virt_to_phys().
- * The sinc argument specifies whether or not the source address is incremented
- * by the DMA controller.  The source address is incremented if and only if sinc
- * is non-zero.  The destination address is always incremented since the 
- * destination is always host RAM.
- */
-static void 
-idma_pci9_read(u8 *dst, u8 *src, int bytes, int unit_size, int sinc)
-{
-	unsigned long flags;
-	volatile idma_t *pram = &idma_dpram->pram;
-	volatile idma_bd_t *bd = &idma_dpram->bd;
-	volatile cpm2_map_t *immap = cpm2_immr;
-
-	local_irq_save(flags);
-
-	/* initialize IDMA parameter RAM for this transfer */
-	if (sinc)
-		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC
-			  | IDMA_DCM_DINC | IDMA_DCM_SD_MEM2MEM;
-	else
-		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_DINC 
-			  | IDMA_DCM_SD_MEM2MEM;
-	pram->ibdptr = pram->ibase;
-	pram->sts = unit_size;
-	pram->istate = 0;
-
-	/* initialize the buffer descriptor */
-	bd->dst = virt_to_phys(dst);
-	bd->src = (uint) src;
-	bd->len = bytes;
-	bd->flags = IDMA_BD_V | IDMA_BD_W | IDMA_BD_I | IDMA_BD_L | IDMA_BD_DGBL
-		  | IDMA_BD_DBO_BE | IDMA_BD_SBO_BE | IDMA_BD_SDTB;
-
-	/* issue the START_IDMA command to the CP */
-	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
-	immap->im_cpm.cp_cpcr = mk_cr_cmd(IDMA_PAGE, IDMA_SBLOCK, 0,
-					 CPM_CR_START_IDMA) | CPM_CR_FLG;
-	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
-
-	/* wait for transfer to complete */
-	while(bd->flags & IDMA_BD_V);
-
-	local_irq_restore(flags);
-
-	return;
-}
-
-/* Use the IDMA controller to transfer data from I/O memory to local RAM.
- * The dst address must be a physical address suitable for use by the DMA 
- * controller with no translation.  The src address must be a kernel virtual 
- * address.  The src address is translated to a physical address via 
- * virt_to_phys().
- * The dinc argument specifies whether or not the dest address is incremented
- * by the DMA controller.  The source address is incremented if and only if sinc
- * is non-zero.  The source address is always incremented since the 
- * source is always host RAM.
- */
-static void 
-idma_pci9_write(u8 *dst, u8 *src, int bytes, int unit_size, int dinc)
-{
-	unsigned long flags;
-	volatile idma_t *pram = &idma_dpram->pram;
-	volatile idma_bd_t *bd = &idma_dpram->bd;
-	volatile cpm2_map_t *immap = cpm2_immr;
-
-	local_irq_save(flags);
-
-	/* initialize IDMA parameter RAM for this transfer */
-	if (dinc)
-		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC
-			  | IDMA_DCM_DINC | IDMA_DCM_SD_MEM2MEM;
-	else
-		pram->dcm = IDMA_DCM_DMA_WRAP_64 | IDMA_DCM_SINC 
-			  | IDMA_DCM_SD_MEM2MEM;
-	pram->ibdptr = pram->ibase;
-	pram->sts = unit_size;
-	pram->istate = 0;
-
-	/* initialize the buffer descriptor */
-	bd->dst = (uint) dst;
-	bd->src = virt_to_phys(src);
-	bd->len = bytes;
-	bd->flags = IDMA_BD_V | IDMA_BD_W | IDMA_BD_I | IDMA_BD_L | IDMA_BD_DGBL
-		  | IDMA_BD_DBO_BE | IDMA_BD_SBO_BE | IDMA_BD_SDTB;
-
-	/* issue the START_IDMA command to the CP */
-	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
-	immap->im_cpm.cp_cpcr = mk_cr_cmd(IDMA_PAGE, IDMA_SBLOCK, 0,
-					 CPM_CR_START_IDMA) | CPM_CR_FLG;
-	while (immap->im_cpm.cp_cpcr & CPM_CR_FLG);
-
-	/* wait for transfer to complete */
-	while(bd->flags & IDMA_BD_V);
-
-	local_irq_restore(flags);
-
-	return;
-}
-
-/* Same as idma_pci9_read, but 16-bit little-endian byte swapping is performed
- * if the unit_size is 2, and 32-bit little-endian byte swapping is performed if
- * the unit_size is 4.
- */
-static void 
-idma_pci9_read_le(u8 *dst, u8 *src, int bytes, int unit_size, int sinc)
-{
-	int i;
-	u8 *p;
-
-	idma_pci9_read(dst, src, bytes, unit_size, sinc);
-	switch(unit_size) {
-		case 2:
-			for (i = 0, p = dst; i < bytes; i += 2, p += 2)
-				swab16s((u16 *) p);
-			break;
-		case 4:
-			for (i = 0, p = dst; i < bytes; i += 4, p += 4)
-				swab32s((u32 *) p);
-			break;
-		default:
-			break;
-	}
-}
-EXPORT_SYMBOL(idma_pci9_init);
-EXPORT_SYMBOL(idma_pci9_read);
-EXPORT_SYMBOL(idma_pci9_read_le);
-
-static inline int is_pci_mem(unsigned long addr)
-{
-	if (addr >= M82xx_PCI_LOWER_MMIO &&
-		addr <= M82xx_PCI_UPPER_MMIO)
-		return 1;
-	if (addr >= M82xx_PCI_LOWER_MEM &&
-		addr <= M82xx_PCI_UPPER_MEM)
-		return 1;
-	return 0;
-}
-
-#define is_pci_mem(pa) ( (pa > 0x80000000) && (pa < 0xc0000000))
-int readb(volatile unsigned char *addr)
-{
-	u8 val;
-	unsigned long pa = iopa((unsigned long) addr);
-
-	if (!is_pci_mem(pa))
-		return in_8(addr);
-
-	idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
-	return val;
-}
-
-int readw(volatile unsigned short *addr)
-{
-	u16 val;
-	unsigned long pa = iopa((unsigned long) addr);
-
-	if (!is_pci_mem(pa))
-		return in_le16(addr);
-
-	idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
-	return swab16(val);
-}
-
-unsigned readl(volatile unsigned *addr)
-{
-	u32 val;
-	unsigned long pa = iopa((unsigned long) addr);
-
-	if (!is_pci_mem(pa))
-		return in_le32(addr);
-
-	idma_pci9_read((u8 *)&val, (u8 *)pa, sizeof(val), sizeof(val), 0);
-	return swab32(val);
-}
-
-int inb(unsigned port)
-{
-	u8 val;
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
-	return val;
-}
-
-int inw(unsigned port)
-{
-	u16 val;
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
-	return swab16(val);
-}
-
-unsigned inl(unsigned port)
-{
-	u32 val;
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)&val, (u8 *)addr, sizeof(val), sizeof(val), 0);
-	return swab32(val);
-}
-
-void insb(unsigned port, void *buf, int ns)
-{
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)buf, (u8 *)addr, ns*sizeof(u8), sizeof(u8), 0);
-}
-
-void insw(unsigned port, void *buf, int ns)
-{
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)buf, (u8 *)addr, ns*sizeof(u16), sizeof(u16), 0);
-}
-
-void insl(unsigned port, void *buf, int nl)
-{
-	u8 *addr = (u8 *)(port + _IO_BASE);
-
-	idma_pci9_read((u8 *)buf, (u8 *)addr, nl*sizeof(u32), sizeof(u32), 0);
-}
-
-void *memcpy_fromio(void *dest, unsigned long src, size_t count)
-{
-	unsigned long pa = iopa((unsigned long) src);
-
-	if (is_pci_mem(pa))
-		idma_pci9_read((u8 *)dest, (u8 *)pa, count, 32, 1);
-	else
-		memcpy(dest, (void *)src, count);
-	return dest;
-}
-
-EXPORT_SYMBOL(readb);
-EXPORT_SYMBOL(readw);
-EXPORT_SYMBOL(readl);
-EXPORT_SYMBOL(inb);
-EXPORT_SYMBOL(inw);
-EXPORT_SYMBOL(inl);
-EXPORT_SYMBOL(insb);
-EXPORT_SYMBOL(insw);
-EXPORT_SYMBOL(insl);
-EXPORT_SYMBOL(memcpy_fromio);
-
-#endif	/* ifdef CONFIG_8260_PCI9 */
-
-/* Indirect PCI routines adapted from arch/ppc/kernel/indirect_pci.c.
- * Copyright (C) 1998 Gabriel Paubert.
- */
-#ifndef CONFIG_8260_PCI9
-#define cfg_read(val, addr, type, op)	*val = op((type)(addr))
-#else
-#define cfg_read(val, addr, type, op) \
-	idma_pci9_read_le((u8*)(val),(u8*)(addr),sizeof(*(val)),sizeof(*(val)),0)
-#endif
-
-#define cfg_write(val, addr, type, op)	op((type *)(addr), (val))
-
-static int indirect_write_config(struct pci_bus *pbus, unsigned int devfn, int where,
-			 int size, u32 value)
-{
-	struct pci_controller *hose = pbus->sysdata;
-	u8 cfg_type = 0;
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(pbus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (hose->set_cfg_type)
-		if (pbus->number != hose->first_busno)
-			cfg_type = 1;
-
-	out_be32(hose->cfg_addr,
-		 (((where & 0xfc) | cfg_type) << 24) | (devfn << 16)
-		 | ((pbus->number - hose->bus_offset) << 8) | 0x80);
-
-	switch (size)
-	{
-		case 1:
-			cfg_write(value, hose->cfg_data + (where & 3), u8, out_8);
-			break;
-		case 2:
-			cfg_write(value, hose->cfg_data + (where & 2), u16, out_le16);
-			break;
-		case 4:
-			cfg_write(value, hose->cfg_data + (where & 0), u32, out_le32);
-			break;
-	}		
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int indirect_read_config(struct pci_bus *pbus, unsigned int devfn, int where,
-			 int size, u32 *value)
-{
-	struct pci_controller *hose = pbus->sysdata;
-	u8 cfg_type = 0;
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(pbus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (hose->set_cfg_type)
-		if (pbus->number != hose->first_busno)
-			cfg_type = 1;
-
-	out_be32(hose->cfg_addr,
-		 (((where & 0xfc) | cfg_type) << 24) | (devfn << 16)
-		 | ((pbus->number - hose->bus_offset) << 8) | 0x80);
-
-	switch (size)
-	{
-		case 1:
-			cfg_read(value, hose->cfg_data + (where & 3), u8 *, in_8);
-			break;
-		case 2:
-			cfg_read(value, hose->cfg_data + (where & 2), u16 *, in_le16);
-			break;
-		case 4:
-			cfg_read(value, hose->cfg_data + (where & 0), u32 *, in_le32);
-			break;
-	}		
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops indirect_pci_ops =
-{
-	.read = indirect_read_config,
-	.write = indirect_write_config,
-};
-
-void
-setup_m8260_indirect_pci(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data)
-{
-	hose->ops = &indirect_pci_ops;
-	hose->cfg_addr = (unsigned int *) ioremap(cfg_addr, 4);
-	hose->cfg_data = (unsigned char *) ioremap(cfg_data, 4);
-}
diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c
deleted file mode 100644
index b40583724de3..000000000000
--- a/arch/ppc/syslib/m8260_setup.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- *  Copyright (C) 1995  Linus Torvalds
- *  Adapted from 'alpha' version by Gary Thomas
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *  Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
- *  Further modified for generic 8xx and 8260 by Dan.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/root_dev.h>
-#include <linux/seq_file.h>
-#include <linux/irq.h>
-
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8260.h>
-#include <asm/cpm2.h>
-#include <asm/machdep.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-#include <asm/ppc_sys.h>
-
-#include "cpm2_pic.h"
-
-unsigned char __res[sizeof(bd_t)];
-
-extern void pq2_find_bridges(void);
-extern void pq2pci_init_irq(void);
-extern void idma_pci9_init(void);
-
-/* Place-holder for board-specific init */
-void __attribute__ ((weak)) __init
-m82xx_board_setup(void)
-{
-}
-
-static void __init
-m8260_setup_arch(void)
-{
-	/* Print out Vendor and Machine info. */
-	printk(KERN_INFO "%s %s port\n", CPUINFO_VENDOR, CPUINFO_MACHINE);
-
-	/* Reset the Communication Processor Module. */
-	cpm2_reset();
-#ifdef CONFIG_8260_PCI9
-	/* Initialise IDMA for PCI erratum workaround */
-	idma_pci9_init();
-#endif
-#ifdef CONFIG_PCI_8260
-	pq2_find_bridges();
-#endif
-#ifdef CONFIG_BLK_DEV_INITRD
-	if (initrd_start)
-		ROOT_DEV = Root_RAM0;
-#endif
-
-	identify_ppc_sys_by_name_and_id(BOARD_CHIP_NAME,
-			in_be32((void *)CPM_MAP_ADDR + CPM_IMMR_OFFSET));
-
-	m82xx_board_setup();
-}
-
-/* The decrementer counts at the system (internal) clock frequency
- * divided by four.
- */
-static void __init
-m8260_calibrate_decr(void)
-{
-	bd_t *binfo = (bd_t *)__res;
-	int freq, divisor;
-
-	freq = binfo->bi_busfreq;
-        divisor = 4;
-        tb_ticks_per_jiffy = freq / HZ / divisor;
-	tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
-}
-
-/* The 8260 has an internal 1-second timer update register that
- * we should use for this purpose.
- */
-static uint rtc_time;
-
-static int
-m8260_set_rtc_time(unsigned long time)
-{
-	rtc_time = time;
-
-	return(0);
-}
-
-static unsigned long
-m8260_get_rtc_time(void)
-{
-	/* Get time from the RTC.
-	*/
-	return((unsigned long)rtc_time);
-}
-
-#ifndef BOOTROM_RESTART_ADDR
-#warning "Using default BOOTROM_RESTART_ADDR!"
-#define BOOTROM_RESTART_ADDR	0xff000104
-#endif
-
-static void
-m8260_restart(char *cmd)
-{
-	extern void m8260_gorom(bd_t *bi, uint addr);
-	uint	startaddr;
-
-	/* Most boot roms have a warmstart as the second instruction
-	 * of the reset vector.  If that doesn't work for you, change this
-	 * or the reboot program to send a proper address.
-	 */
-	startaddr = BOOTROM_RESTART_ADDR;
-	if (cmd != NULL) {
-		if (!strncmp(cmd, "startaddr=", 10))
-			startaddr = simple_strtoul(&cmd[10], NULL, 0);
-	}
-
-	m8260_gorom((void*)__pa(__res), startaddr);
-}
-
-static void
-m8260_halt(void)
-{
-	local_irq_disable();
-	while (1);
-}
-
-static void
-m8260_power_off(void)
-{
-	m8260_halt();
-}
-
-static int
-m8260_show_cpuinfo(struct seq_file *m)
-{
-	bd_t *bp = (bd_t *)__res;
-
-	seq_printf(m, "vendor\t\t: %s\n"
-		   "machine\t\t: %s\n"
-		   "\n"
-		   "mem size\t\t: 0x%08lx\n"
-		   "console baud\t\t: %ld\n"
-		   "\n"
-		   "core clock\t: %lu MHz\n"
-		   "CPM  clock\t: %lu MHz\n"
-		   "bus  clock\t: %lu MHz\n",
-		   CPUINFO_VENDOR, CPUINFO_MACHINE, bp->bi_memsize,
-		   bp->bi_baudrate, bp->bi_intfreq / 1000000,
-		   bp->bi_cpmfreq / 1000000, bp->bi_busfreq / 1000000);
-	return 0;
-}
-
-/* Initialize the internal interrupt controller.  The number of
- * interrupts supported can vary with the processor type, and the
- * 8260 family can have up to 64.
- * External interrupts can be either edge or level triggered, and
- * need to be initialized by the appropriate driver.
- */
-static void __init
-m8260_init_IRQ(void)
-{
-	cpm2_init_IRQ();
-
-	/* Initialize the default interrupt mapping priorities,
-	 * in case the boot rom changed something on us.
-	 */
-	cpm2_immr->im_intctl.ic_siprr = 0x05309770;
-}
-
-/*
- * Same hack as 8xx
- */
-static unsigned long __init
-m8260_find_end_of_memory(void)
-{
-	bd_t *binfo = (bd_t *)__res;
-
-	return binfo->bi_memsize;
-}
-
-/* Map the IMMR, plus anything else we can cover
- * in that upper space according to the memory controller
- * chip select mapping.  Grab another bunch of space
- * below that for stuff we can't cover in the upper.
- */
-static void __init
-m8260_map_io(void)
-{
-	uint addr;
-
-	/* Map IMMR region to a 256MB BAT */
-	addr = (cpm2_immr != NULL) ? (uint)cpm2_immr : CPM_MAP_ADDR;
-	io_block_mapping(addr, addr, 0x10000000, _PAGE_IO);
-
-	/* Map I/O region to a 256MB BAT */
-	io_block_mapping(IO_VIRT_ADDR, IO_PHYS_ADDR, 0x10000000, _PAGE_IO);
-}
-
-/* Place-holder for board-specific ppc_md hooking */
-void __attribute__ ((weak)) __init
-m82xx_board_init(void)
-{
-}
-
-/* Inputs:
- *   r3 - Optional pointer to a board information structure.
- *   r4 - Optional pointer to the physical starting address of the init RAM
- *        disk.
- *   r5 - Optional pointer to the physical ending address of the init RAM
- *        disk.
- *   r6 - Optional pointer to the physical starting address of any kernel
- *        command-line parameters.
- *   r7 - Optional pointer to the physical ending address of any kernel
- *        command-line parameters.
- */
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	      unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	if ( r3 )
-		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if ( r4 ) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-	/* take care of cmd line */
-	if ( r6 ) {
-		*(char *)(r7+KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6+KERNELBASE));
-	}
-
-	ppc_md.setup_arch		= m8260_setup_arch;
-	ppc_md.show_cpuinfo		= m8260_show_cpuinfo;
-	ppc_md.init_IRQ			= m8260_init_IRQ;
-	ppc_md.get_irq			= cpm2_get_irq;
-
-	ppc_md.restart			= m8260_restart;
-	ppc_md.power_off		= m8260_power_off;
-	ppc_md.halt			= m8260_halt;
-
-	ppc_md.set_rtc_time		= m8260_set_rtc_time;
-	ppc_md.get_rtc_time		= m8260_get_rtc_time;
-	ppc_md.calibrate_decr		= m8260_calibrate_decr;
-
-	ppc_md.find_end_of_memory	= m8260_find_end_of_memory;
-	ppc_md.setup_io_mappings	= m8260_map_io;
-
-	/* Call back for board-specific settings and overrides. */
-	m82xx_board_init();
-}
diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c
deleted file mode 100644
index 657a1c25a2ab..000000000000
--- a/arch/ppc/syslib/m82xx_pci.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- *
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004 Red Hat, Inc.
- *
- * 2005 (c) MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/immap_cpm2.h>
-#include <asm/mpc8260.h>
-#include <asm/cpm2.h>
-
-#include "m82xx_pci.h"
-
-/*
- * Interrupt routing
- */
-
-static inline int
-pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
-	static char pci_irq_table[][4] =
-	/*
-	 *	PCI IDSEL/INTPIN->INTLINE
-	 * 	  A      B      C      D
-	 */
-	{
-		{ PIRQA, PIRQB, PIRQC, PIRQD },	/* IDSEL 22 - PCI slot 0 */
-		{ PIRQD, PIRQA, PIRQB, PIRQC },	/* IDSEL 23 - PCI slot 1 */
-		{ PIRQC, PIRQD, PIRQA, PIRQB },	/* IDSEL 24 - PCI slot 2 */
-	};
-
-	const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4;
-	return PCI_IRQ_TABLE_LOOKUP;
-}
-
-static void
-pq2pci_mask_irq(unsigned int irq)
-{
-	int bit = irq - NR_CPM_INTS;
-
-	*(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
-	return;
-}
-
-static void
-pq2pci_unmask_irq(unsigned int irq)
-{
-	int bit = irq - NR_CPM_INTS;
-
-	*(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
-	return;
-}
-
-static void
-pq2pci_mask_and_ack(unsigned int irq)
-{
-	int bit = irq - NR_CPM_INTS;
-
-	*(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
-	return;
-}
-
-static void
-pq2pci_end_irq(unsigned int irq)
-{
-	int bit = irq - NR_CPM_INTS;
-
-	*(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
-	return;
-}
-
-struct hw_interrupt_type pq2pci_ic = {
-	"PQ2 PCI",
-	NULL,
-	NULL,
-	pq2pci_unmask_irq,
-	pq2pci_mask_irq,
-	pq2pci_mask_and_ack,
-	pq2pci_end_irq,
-	0
-};
-
-static irqreturn_t
-pq2pci_irq_demux(int irq, void *dev_id)
-{
-	unsigned long stat, mask, pend;
-	int bit;
-
-	for(;;) {
-		stat = *(volatile unsigned long *) PCI_INT_STAT_REG;
-		mask = *(volatile unsigned long *) PCI_INT_MASK_REG;
-		pend = stat & ~mask & 0xf0000000;
-		if (!pend)
-			break;
-		for (bit = 0; pend != 0; ++bit, pend <<= 1) {
-			if (pend & 0x80000000)
-				__do_IRQ(NR_CPM_INTS + bit);
-		}
-	}
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction pq2pci_irqaction = {
-	.handler = pq2pci_irq_demux,
-	.flags 	 = IRQF_DISABLED,
-	.mask	 = CPU_MASK_NONE,
-	.name	 = "PQ2 PCI cascade",
-};
-
-
-void
-pq2pci_init_irq(void)
-{
-	int irq;
-	volatile cpm2_map_t *immap = cpm2_immr;
-	for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++)
-		irq_desc[irq].chip = &pq2pci_ic;
-
-	/* make PCI IRQ level sensitive */
-	immap->im_intctl.ic_siexr &=
-		~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1)));
-
-	/* mask all PCI interrupts */
-	*(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000;
-
-	/* install the demultiplexer for the PCI cascade interrupt */
-	setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction);
-	return;
-}
-
-static int
-pq2pci_exclude_device(u_char bus, u_char devfn)
-{
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/* PCI bus configuration registers.
- */
-static void
-pq2ads_setup_pci(struct pci_controller *hose)
-{
-	__u32 val;
-	volatile cpm2_map_t *immap = cpm2_immr;
-	bd_t* binfo = (bd_t*) __res;
-	u32 sccr = immap->im_clkrst.car_sccr;
-	uint pci_div,freq,time;
-		/* PCI int lowest prio */
-	/* Each 4 bits is a device bus request	and the MS 4bits
-	 is highest priority */
-	/* Bus                4bit value
-	   ---                ----------
-	   CPM high      	0b0000
-	   CPM middle           0b0001
-	   CPM low       	0b0010
-	   PCI request          0b0011
-	   Reserved      	0b0100
-	   Reserved      	0b0101
-	   Internal Core     	0b0110
-	   External Master 1 	0b0111
-	   External Master 2 	0b1000
-	   External Master 3 	0b1001
-	   The rest are reserved
-	 */
-	immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
-	/* park bus on core */
-	immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE;
-	/*
-	 * Set up master windows that allow the CPU to access PCI space. These
-	 * windows are set up using the two SIU PCIBR registers.
-	 */
-
-	immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE;
-	immap->im_memctl.memc_pcibr0  = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE;
-
-#ifdef M82xx_PCI_SEC_WND_SIZE
-	immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE;
-	immap->im_memctl.memc_pcibr1  = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE;
-#endif
-
-	/* Enable PCI  */
-	immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
-
-	pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) *
-			( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1);
-	freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div));
-	time = (int)66666666/freq;
-
-	/* due to PCI Local Bus spec, some devices needs to wait such a long
-	time after RST 	deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */
-	printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq,
-	(time==1) ? "0.5 seconds":"1 second" );
-
-	{
-		int i;
-		for(i=0;i<(500*time);i++)
-			udelay(1000);
-	}
-
-	/* setup ATU registers */
-	immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO |
-				((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT));
-	immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT);
-	immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT);
-
-	/* Set-up non-prefetchable window */
-	immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT));
-	immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT);
-	immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT);
-
-	/* Set-up prefetchable window */
-	immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN |
-		(~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT));
-	immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT);
-	immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT);
-
- 	/* Inbound transactions from PCI memory space */
-	immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN |
-					((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT));
-	immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS  >> PITA_ADDR_SHIFT);
-	immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT);
-
-	/* park bus on PCI */
-	immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
-
-	/* Enable bus mastering and inbound memory transactions */
-	early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val);
-	val &= 0xffff0000;
-	val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER;
-	early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val);
-
-}
-
-void __init pq2_find_bridges(void)
-{
-	extern int pci_assign_all_buses;
-	struct pci_controller * hose;
-	int host_bridge;
-
-	pci_assign_all_buses = 1;
-
-	hose = pcibios_alloc_controller();
-
-	if (!hose)
-		return;
-
-	ppc_md.pci_swizzle = common_swizzle;
-
-	hose->first_busno = 0;
-	hose->bus_offset = 0;
-	hose->last_busno = 0xff;
-
-	setup_m8260_indirect_pci(hose,
-				 (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
-				 (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
-
-	/* Make sure it is a supported bridge */
-	early_read_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-				PCI_VENDOR_ID,
-				&host_bridge);
-	switch (host_bridge) {
-		case PCI_DEVICE_ID_MPC8265:
-			break;
-		case PCI_DEVICE_ID_MPC8272:
-			break;
-		default:
-			printk("Attempting to use unrecognized host bridge ID"
-				" 0x%08x.\n", host_bridge);
-			break;
-	}
-
-	pq2ads_setup_pci(hose);
-
-	hose->io_space.start =	M82xx_PCI_LOWER_IO;
-	hose->io_space.end = M82xx_PCI_UPPER_IO;
-	hose->mem_space.start = M82xx_PCI_LOWER_MEM;
-	hose->mem_space.end = M82xx_PCI_UPPER_MMIO;
-	hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET;
-
-	isa_io_base =
-	(unsigned long) ioremap(M82xx_PCI_IO_BASE,
-					M82xx_PCI_IO_SIZE);
-	hose->io_base_virt = (void *) isa_io_base;
-
-	/* setup resources */
-	pci_init_resource(&hose->mem_resources[0],
-			M82xx_PCI_LOWER_MEM,
-			M82xx_PCI_UPPER_MEM,
-			IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
-
-	pci_init_resource(&hose->mem_resources[1],
-			M82xx_PCI_LOWER_MMIO,
-			M82xx_PCI_UPPER_MMIO,
-			IORESOURCE_MEM, "PCI memory");
-
-	pci_init_resource(&hose->io_resource,
-			M82xx_PCI_LOWER_IO,
-			M82xx_PCI_UPPER_IO,
-			IORESOURCE_IO | 1, "PCI I/O");
-
-	ppc_md.pci_exclude_device = pq2pci_exclude_device;
-	hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
-
-	ppc_md.pci_map_irq = pq2pci_map_irq;
-	ppc_md.pcibios_fixup = NULL;
-	ppc_md.pcibios_fixup_bus = NULL;
-
-}
diff --git a/arch/ppc/syslib/m82xx_pci.h b/arch/ppc/syslib/m82xx_pci.h
deleted file mode 100644
index 924f73f8e595..000000000000
--- a/arch/ppc/syslib/m82xx_pci.h
+++ /dev/null
@@ -1,92 +0,0 @@
-
-#ifndef _PPC_KERNEL_M82XX_PCI_H
-#define _PPC_KERNEL_M82XX_PCI_H
-
-#include <asm/m8260_pci.h>
-/*
- *   Local->PCI map (from CPU)                             controlled by
- *   MPC826x master window
- *
- *   0xF6000000 - 0xF7FFFFFF    IO space
- *   0x80000000 - 0xBFFFFFFF    CPU2PCI memory space       PCIBR0
- *
- *   0x80000000 - 0x9FFFFFFF    PCI Mem with prefetch      (Outbound ATU #1)
- *   0xA0000000 - 0xBFFFFFFF    PCI Mem w/o  prefetch      (Outbound ATU #2)
- *   0xF6000000 - 0xF7FFFFFF    32-bit PCI IO              (Outbound ATU #3)
- *
- *   PCI->Local map (from PCI)
- *   MPC826x slave window                                  controlled by
- *
- *   0x00000000 - 0x07FFFFFF    MPC826x local memory       (Inbound ATU #1)
- */
-
-/*
- * Slave window that allows PCI masters to access MPC826x local memory.
- * This window is set up using the first set of Inbound ATU registers
- */
-
-#ifndef M82xx_PCI_SLAVE_MEM_LOCAL
-#define M82xx_PCI_SLAVE_MEM_LOCAL	(((struct bd_info *)__res)->bi_memstart)
-#define M82xx_PCI_SLAVE_MEM_BUS		(((struct bd_info *)__res)->bi_memstart)
-#define M82xx_PCI_SLAVE_MEM_SIZE	(((struct bd_info *)__res)->bi_memsize)
-#endif
-
-/*
- * This is the window that allows the CPU to access PCI address space.
- * It will be setup with the SIU PCIBR0 register. All three PCI master
- * windows, which allow the CPU to access PCI prefetch, non prefetch,
- * and IO space (see below), must all fit within this window.
- */
-
-#ifndef M82xx_PCI_LOWER_MEM
-#define M82xx_PCI_LOWER_MEM		0x80000000
-#define M82xx_PCI_UPPER_MEM		0x9fffffff
-#define M82xx_PCI_MEM_OFFSET		0x00000000
-#define M82xx_PCI_MEM_SIZE		0x20000000
-#endif
-
-#ifndef M82xx_PCI_LOWER_MMIO
-#define M82xx_PCI_LOWER_MMIO		0xa0000000
-#define M82xx_PCI_UPPER_MMIO		0xafffffff
-#define M82xx_PCI_MMIO_OFFSET		0x00000000
-#define M82xx_PCI_MMIO_SIZE		0x20000000
-#endif
-
-#ifndef M82xx_PCI_LOWER_IO
-#define M82xx_PCI_LOWER_IO		0x00000000
-#define M82xx_PCI_UPPER_IO		0x01ffffff
-#define M82xx_PCI_IO_BASE		0xf6000000
-#define M82xx_PCI_IO_SIZE		0x02000000
-#endif
-
-#ifndef M82xx_PCI_PRIM_WND_SIZE
-#define M82xx_PCI_PRIM_WND_SIZE 	~(M82xx_PCI_IO_SIZE - 1U)
-#define M82xx_PCI_PRIM_WND_BASE		(M82xx_PCI_IO_BASE)
-#endif
-
-#ifndef M82xx_PCI_SEC_WND_SIZE
-#define M82xx_PCI_SEC_WND_SIZE 		~(M82xx_PCI_MEM_SIZE + M82xx_PCI_MMIO_SIZE - 1U)
-#define M82xx_PCI_SEC_WND_BASE 		(M82xx_PCI_LOWER_MEM)
-#endif
-
-#ifndef POTA_ADDR_SHIFT
-#define POTA_ADDR_SHIFT		12
-#endif
-
-#ifndef PITA_ADDR_SHIFT
-#define PITA_ADDR_SHIFT		12
-#endif
-
-#ifndef _IO_BASE
-#define _IO_BASE isa_io_base
-#endif
-
-#ifdef CONFIG_8260_PCI9
-struct pci_controller;
-extern void setup_m8260_indirect_pci(struct pci_controller* hose,
-					u32 cfg_addr, u32 cfg_data);
-#else
-#define setup_m8260_indirect_pci setup_indirect_pci
-#endif
-
-#endif /* _PPC_KERNEL_M8260_PCI_H */
diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c
deleted file mode 100644
index 18da720fc1b0..000000000000
--- a/arch/ppc/syslib/m8xx_setup.c
+++ /dev/null
@@ -1,465 +0,0 @@
-/*
- *  Copyright (C) 1995  Linus Torvalds
- *  Adapted from 'alpha' version by Gary Thomas
- *  Modified by Cort Dougan (cort@cs.nmt.edu)
- *  Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
- *  Further modified for generic 8xx by Dan.
- */
-
-/*
- * bootup setup stuff..
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/tty.h>
-#include <linux/major.h>
-#include <linux/interrupt.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/ioport.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
-
-#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP)
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#endif
-
-#include <asm/mmu.h>
-#include <asm/reg.h>
-#include <asm/residual.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/mpc8xx.h>
-#include <asm/8xx_immap.h>
-#include <asm/machdep.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-#include <asm/xmon.h>
-#include <asm/ppc_sys.h>
-
-#include "ppc8xx_pic.h"
-
-#ifdef CONFIG_MTD_PHYSMAP
-#define MPC8xxADS_BANK_WIDTH 4
-#endif
-
-#define MPC8xxADS_U_BOOT_SIZE          0x80000
-#define MPC8xxADS_FREE_AREA_OFFSET     MPC8xxADS_U_BOOT_SIZE
-
-#if defined(CONFIG_MTD_PARTITIONS)
- /*
-   NOTE: bank width and interleave relative to the installed flash
-   should have been chosen within MTD_CFI_GEOMETRY options.
- */
-static struct mtd_partition mpc8xxads_partitions[] = {
-	{
-		.name = "bootloader",
-		.size = MPC8xxADS_U_BOOT_SIZE,
-		.offset = 0,
-		.mask_flags   = MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name = "User FS",
-		.offset = MPC8xxADS_FREE_AREA_OFFSET
-	}
-};
-
-#define mpc8xxads_part_num ARRAY_SIZE(mpc8xxads_partitions)
-
-#endif
-
-static int m8xx_set_rtc_time(unsigned long time);
-static unsigned long m8xx_get_rtc_time(void);
-void m8xx_calibrate_decr(void);
-
-unsigned char __res[sizeof(bd_t)];
-
-extern unsigned long find_available_memory(void);
-extern void m8xx_cpm_reset(void);
-extern void m8xx_wdt_handler_install(bd_t *bp);
-extern void rpxfb_alloc_pages(void);
-extern void cpm_interrupt_init(void);
-
-void __attribute__ ((weak))
-board_init(void)
-{
-}
-
-void __init
-m8xx_setup_arch(void)
-{
-#if defined(CONFIG_MTD) && defined(CONFIG_MTD_PHYSMAP)
-	bd_t *binfo = (bd_t *)__res;
-#endif
-
-	/* Reset the Communication Processor Module.
-	*/
-	m8xx_cpm_reset();
-
-#ifdef CONFIG_FB_RPX
-	rpxfb_alloc_pages();
-#endif
-
-#ifdef notdef
-	ROOT_DEV = Root_HDA1; /* hda1 */
-#endif
-
-#ifdef CONFIG_BLK_DEV_INITRD
-#if 0
-	ROOT_DEV = Root_FD0; /* floppy */
-	rd_prompt = 1;
-	rd_doload = 1;
-	rd_image_start = 0;
-#endif
-#if 0	/* XXX this may need to be updated for the new bootmem stuff,
-	   or possibly just deleted (see set_phys_avail() in init.c).
-	   - paulus. */
-	/* initrd_start and size are setup by boot/head.S and kernel/head.S */
-	if ( initrd_start )
-	{
-		if (initrd_end > *memory_end_p)
-		{
-			printk("initrd extends beyond end of memory "
-			       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
-			       initrd_end,*memory_end_p);
-			initrd_start = 0;
-		}
-	}
-#endif
-#endif
-
-	board_init();
-}
-
-void
-abort(void)
-{
-#ifdef CONFIG_XMON
-	xmon(0);
-#endif
-	machine_restart(NULL);
-
-	/* not reached */
-	for (;;);
-}
-
-/* A place holder for time base interrupts, if they are ever enabled. */
-irqreturn_t timebase_interrupt(int irq, void * dev)
-{
-	printk ("timebase_interrupt()\n");
-
-	return IRQ_HANDLED;
-}
-
-static struct irqaction tbint_irqaction = {
-	.handler = timebase_interrupt,
-	.mask = CPU_MASK_NONE,
-	.name = "tbint",
-};
-
-/* per-board overridable init_internal_rtc() function. */
-void __init __attribute__ ((weak))
-init_internal_rtc(void)
-{
-	/* Disable the RTC one second and alarm interrupts. */
-	clrbits16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, (RTCSC_SIE | RTCSC_ALE));
-
-	/* Enable the RTC */
-	setbits16(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc, (RTCSC_RTF | RTCSC_RTE));
-
-}
-
-/* The decrementer counts at the system (internal) clock frequency divided by
- * sixteen, or external oscillator divided by four.  We force the processor
- * to use system clock divided by sixteen.
- */
-void __init m8xx_calibrate_decr(void)
-{
-	bd_t	*binfo = (bd_t *)__res;
-	int freq, fp, divisor;
-
-	/* Unlock the SCCR. */
-	out_be32(&((immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk, ~KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk, KAPWR_KEY);
-
-	/* Force all 8xx processors to use divide by 16 processor clock. */
-	setbits32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_sccr, 0x02000000);
-	/* Processor frequency is MHz.
-	 * The value 'fp' is the number of decrementer ticks per second.
-	 */
-	fp = binfo->bi_intfreq / 16;
-	freq = fp*60;	/* try to make freq/1e6 an integer */
-        divisor = 60;
-        printk("Decrementer Frequency = %d/%d\n", freq, divisor);
-        tb_ticks_per_jiffy = freq / HZ / divisor;
-	tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000);
-
-	/* Perform some more timer/timebase initialization.  This used
-	 * to be done elsewhere, but other changes caused it to get
-	 * called more than once....that is a bad thing.
-	 *
-	 * First, unlock all of the registers we are going to modify.
-	 * To protect them from corruption during power down, registers
-	 * that are maintained by keep alive power are "locked".  To
-	 * modify these registers we have to write the key value to
-	 * the key location associated with the register.
-	 * Some boards power up with these unlocked, while others
-	 * are locked.  Writing anything (including the unlock code?)
-	 * to the unlocked registers will lock them again.  So, here
-	 * we guarantee the registers are locked, then we unlock them
-	 * for our use.
-	 */
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk, ~KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck, ~KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk, ~KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk, KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck, KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk, KAPWR_KEY);
-
-	init_internal_rtc();
-
-	/* Enabling the decrementer also enables the timebase interrupts
-	 * (or from the other point of view, to get decrementer interrupts
-	 * we have to enable the timebase).  The decrementer interrupt
-	 * is wired into the vector table, nothing to do here for that.
-	 */
-	out_be16(&((immap_t *)IMAP_ADDR)->im_sit.sit_tbscr, (mk_int_int_mask(DEC_INTERRUPT) << 8) | (TBSCR_TBF | TBSCR_TBE));
-
-	if (setup_irq(DEC_INTERRUPT, &tbint_irqaction))
-		panic("Could not allocate timer IRQ!");
-
-#ifdef CONFIG_8xx_WDT
-	/* Install watchdog timer handler early because it might be
-	 * already enabled by the bootloader
-	 */
-	m8xx_wdt_handler_install(binfo);
-#endif
-}
-
-/* The RTC on the MPC8xx is an internal register.
- * We want to protect this during power down, so we need to unlock,
- * modify, and re-lock.
- */
-static int
-m8xx_set_rtc_time(unsigned long time)
-{
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck, KAPWR_KEY);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtc, time);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck, ~KAPWR_KEY);
-	return(0);
-}
-
-static unsigned long
-m8xx_get_rtc_time(void)
-{
-	/* Get time from the RTC. */
-	return (unsigned long) in_be32(&((immap_t *)IMAP_ADDR)->im_sit.sit_rtc);
-}
-
-static void
-m8xx_restart(char *cmd)
-{
-	__volatile__ unsigned char dummy;
-
-	local_irq_disable();
-
-	setbits32(&((immap_t *)IMAP_ADDR)->im_clkrst.car_plprcr, 0x00000080);
-	/* Clear the ME bit in MSR to cause checkstop on machine check
-	*/
-	mtmsr(mfmsr() & ~0x1000);
-
-	dummy = in_8(&((immap_t *)IMAP_ADDR)->im_clkrst.res[0]);
-	printk("Restart failed\n");
-	while(1);
-}
-
-static void
-m8xx_power_off(void)
-{
-   m8xx_restart(NULL);
-}
-
-static void
-m8xx_halt(void)
-{
-   m8xx_restart(NULL);
-}
-
-
-static int
-m8xx_show_percpuinfo(struct seq_file *m, int i)
-{
-	bd_t	*bp;
-
-	bp = (bd_t *)__res;
-
-	seq_printf(m, "clock\t\t: %uMHz\n"
-		   "bus clock\t: %uMHz\n",
-		   bp->bi_intfreq / 1000000,
-		   bp->bi_busfreq / 1000000);
-
-	return 0;
-}
-
-#ifdef CONFIG_PCI
-static struct irqaction mbx_i8259_irqaction = {
-	.handler = mbx_i8259_action,
-	.mask = CPU_MASK_NONE,
-	.name = "i8259 cascade",
-};
-#endif
-
-/* Initialize the internal interrupt controller.  The number of
- * interrupts supported can vary with the processor type, and the
- * 82xx family can have up to 64.
- * External interrupts can be either edge or level triggered, and
- * need to be initialized by the appropriate driver.
- */
-static void __init
-m8xx_init_IRQ(void)
-{
-	int i;
-
-	for (i = SIU_IRQ_OFFSET ; i < SIU_IRQ_OFFSET + NR_SIU_INTS ; i++)
-		irq_desc[i].chip = &ppc8xx_pic;
-
-	cpm_interrupt_init();
-
-#if defined(CONFIG_PCI)
-	for (i = I8259_IRQ_OFFSET ; i < I8259_IRQ_OFFSET + NR_8259_INTS ; i++)
-		irq_desc[i].chip = &i8259_pic;
-
-	i8259_pic_irq_offset = I8259_IRQ_OFFSET;
-	i8259_init(0);
-
-	/* The i8259 cascade interrupt must be level sensitive. */
-
-	clrbits32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_siel, (0x80000000 >> ISA_BRIDGE_INT));
-	if (setup_irq(ISA_BRIDGE_INT, &mbx_i8259_irqaction))
-		enable_irq(ISA_BRIDGE_INT);
-#endif	/* CONFIG_PCI */
-}
-
-/* -------------------------------------------------------------------- */
-
-/*
- * This is a big hack right now, but it may turn into something real
- * someday.
- *
- * For the 8xx boards (at this time anyway), there is nothing to initialize
- * associated the PROM.  Rather than include all of the prom.c
- * functions in the image just to get prom_init, all we really need right
- * now is the initialization of the physical memory region.
- */
-static unsigned long __init
-m8xx_find_end_of_memory(void)
-{
-	bd_t	*binfo;
-	extern unsigned char __res[];
-
-	binfo = (bd_t *)__res;
-
-	return binfo->bi_memsize;
-}
-
-/*
- * Now map in some of the I/O space that is generically needed
- * or shared with multiple devices.
- * All of this fits into the same 4Mbyte region, so it only
- * requires one page table page.  (or at least it used to  -- paulus)
- */
-static void __init
-m8xx_map_io(void)
-{
-        io_block_mapping(IMAP_ADDR, IMAP_ADDR, IMAP_SIZE, _PAGE_IO);
-#ifdef CONFIG_MBX
-        io_block_mapping(NVRAM_ADDR, NVRAM_ADDR, NVRAM_SIZE, _PAGE_IO);
-        io_block_mapping(MBX_CSR_ADDR, MBX_CSR_ADDR, MBX_CSR_SIZE, _PAGE_IO);
-        io_block_mapping(PCI_CSR_ADDR, PCI_CSR_ADDR, PCI_CSR_SIZE, _PAGE_IO);
-
-	/* Map some of the PCI/ISA I/O space to get the IDE interface.
-	*/
-        io_block_mapping(PCI_ISA_IO_ADDR, PCI_ISA_IO_ADDR, 0x4000, _PAGE_IO);
-        io_block_mapping(PCI_IDE_ADDR, PCI_IDE_ADDR, 0x4000, _PAGE_IO);
-#endif
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
-	io_block_mapping(RPX_CSR_ADDR, RPX_CSR_ADDR, RPX_CSR_SIZE, _PAGE_IO);
-#if !defined(CONFIG_PCI)
-	io_block_mapping(_IO_BASE,_IO_BASE,_IO_BASE_SIZE, _PAGE_IO);
-#endif
-#endif
-#if defined(CONFIG_RPXTOUCH) || defined(CONFIG_FB_RPX)
-	io_block_mapping(HIOX_CSR_ADDR, HIOX_CSR_ADDR, HIOX_CSR_SIZE, _PAGE_IO);
-#endif
-#ifdef CONFIG_FADS
-	io_block_mapping(BCSR_ADDR, BCSR_ADDR, BCSR_SIZE, _PAGE_IO);
-#endif
-#ifdef CONFIG_PCI
-        io_block_mapping(PCI_CSR_ADDR, PCI_CSR_ADDR, PCI_CSR_SIZE, _PAGE_IO);
-#endif
-#if defined(CONFIG_NETTA)
-	io_block_mapping(_IO_BASE,_IO_BASE,_IO_BASE_SIZE, _PAGE_IO);
-#endif
-}
-
-void __init
-platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
-		unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	if ( r3 )
-		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
-
-#ifdef CONFIG_PCI
-	m8xx_setup_pci_ptrs();
-#endif
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	/* take care of initrd if we have one */
-	if ( r4 )
-	{
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif /* CONFIG_BLK_DEV_INITRD */
-	/* take care of cmd line */
-	if ( r6 )
-	{
-		*(char *)(r7+KERNELBASE) = 0;
-		strcpy(cmd_line, (char *)(r6+KERNELBASE));
-	}
-
-	identify_ppc_sys_by_name(BOARD_CHIP_NAME);
-
-	ppc_md.setup_arch		= m8xx_setup_arch;
-	ppc_md.show_percpuinfo		= m8xx_show_percpuinfo;
-	ppc_md.init_IRQ			= m8xx_init_IRQ;
-	ppc_md.get_irq			= m8xx_get_irq;
-	ppc_md.init			= NULL;
-
-	ppc_md.restart			= m8xx_restart;
-	ppc_md.power_off		= m8xx_power_off;
-	ppc_md.halt			= m8xx_halt;
-
-	ppc_md.time_init		= NULL;
-	ppc_md.set_rtc_time		= m8xx_set_rtc_time;
-	ppc_md.get_rtc_time		= m8xx_get_rtc_time;
-	ppc_md.calibrate_decr		= m8xx_calibrate_decr;
-
-	ppc_md.find_end_of_memory	= m8xx_find_end_of_memory;
-	ppc_md.setup_io_mappings	= m8xx_map_io;
-}
diff --git a/arch/ppc/syslib/m8xx_wdt.c b/arch/ppc/syslib/m8xx_wdt.c
deleted file mode 100644
index fffac8cbeb51..000000000000
--- a/arch/ppc/syslib/m8xx_wdt.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * m8xx_wdt.c - MPC8xx watchdog driver
- *
- * Author: Florian Schirmer <jolt@tuxbox.org>
- *
- * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <asm/io.h>
-#include <asm/8xx_immap.h>
-#include <syslib/m8xx_wdt.h>
-
-static int wdt_timeout;
-int m8xx_has_internal_rtc = 0;
-
-static irqreturn_t m8xx_wdt_interrupt(int, void *);
-static struct irqaction m8xx_wdt_irqaction = {
-	.handler = m8xx_wdt_interrupt,
-	.name = "watchdog",
-};
-
-void m8xx_wdt_reset(void)
-{
-	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
-
-	out_be16(&imap->im_siu_conf.sc_swsr, 0x556c);	/* write magic1 */
-	out_be16(&imap->im_siu_conf.sc_swsr, 0xaa39);	/* write magic2 */
-}
-
-static irqreturn_t m8xx_wdt_interrupt(int irq, void *dev)
-{
-	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
-
-	m8xx_wdt_reset();
-
-	setbits16(&imap->im_sit.sit_piscr, PISCR_PS);
-	return IRQ_HANDLED;
-}
-
-#define SYPCR_SWP 0x1
-#define SYPCR_SWE 0x4
-
-
-void __init m8xx_wdt_install_irq(volatile immap_t *imap, bd_t *binfo)
-{
-	u32 pitc;
-	u32 pitrtclk;
-
-	/*
-	 * Fire trigger if half of the wdt ticked down 
-	 */
-
-	if (imap->im_sit.sit_rtcsc & RTCSC_38K)
-		pitrtclk = 9600;
-	else
-		pitrtclk = 8192;
-
-	if ((wdt_timeout) > (UINT_MAX / pitrtclk))
-		pitc = wdt_timeout / binfo->bi_intfreq * pitrtclk / 2;
-	else
-		pitc = pitrtclk * wdt_timeout / binfo->bi_intfreq / 2;
-
-	out_be32(&imap->im_sit.sit_pitc, pitc << 16);
-
-	out_be16(&imap->im_sit.sit_piscr, (mk_int_int_mask(PIT_INTERRUPT) << 8) | PISCR_PIE | PISCR_PTE);
-
-	if (setup_irq(PIT_INTERRUPT, &m8xx_wdt_irqaction))
-		panic("m8xx_wdt: error setting up the watchdog irq!");
-
-	printk(KERN_NOTICE
-	       "m8xx_wdt: keep-alive trigger installed (PITC: 0x%04X)\n", pitc);
-
-}
-
-static void m8xx_wdt_timer_func(unsigned long data);
-
-static struct timer_list m8xx_wdt_timer =
-	TIMER_INITIALIZER(m8xx_wdt_timer_func, 0, 0);
-
-void m8xx_wdt_stop_timer(void)
-{
-	del_timer(&m8xx_wdt_timer);
-}
-
-void m8xx_wdt_install_timer(void)
-{
-	m8xx_wdt_timer.expires = jiffies + (HZ/2);
-	add_timer(&m8xx_wdt_timer);
-}
-
-static void m8xx_wdt_timer_func(unsigned long data)
-{
-	m8xx_wdt_reset();
-	m8xx_wdt_install_timer();
-}
-
-void __init m8xx_wdt_handler_install(bd_t * binfo)
-{
-	volatile immap_t *imap = (volatile immap_t *)IMAP_ADDR;
-	u32 sypcr;
-
-	sypcr = in_be32(&imap->im_siu_conf.sc_sypcr);
-
-	if (!(sypcr & SYPCR_SWE)) {
-		printk(KERN_NOTICE "m8xx_wdt: wdt disabled (SYPCR: 0x%08X)\n",
-		       sypcr);
-		return;
-	}
-
-	m8xx_wdt_reset();
-
-	printk(KERN_NOTICE
-	       "m8xx_wdt: active wdt found (SWTC: 0x%04X, SWP: 0x%01X)\n",
-	       (sypcr >> 16), sypcr & SYPCR_SWP);
-
-	wdt_timeout = (sypcr >> 16) & 0xFFFF;
-
-	if (!wdt_timeout)
-		wdt_timeout = 0xFFFF;
-
-	if (sypcr & SYPCR_SWP)
-		wdt_timeout *= 2048;
-
-	m8xx_has_internal_rtc = in_be16(&imap->im_sit.sit_rtcsc) & RTCSC_RTE;
-
-	/* if the internal RTC is off use a kernel timer */
-	if (!m8xx_has_internal_rtc) {
-		if (wdt_timeout < (binfo->bi_intfreq/HZ))
-			printk(KERN_ERR "m8xx_wdt: timeout too short for ktimer!\n");
-		m8xx_wdt_install_timer();
-	} else
-		m8xx_wdt_install_irq(imap, binfo);
-
-	wdt_timeout /= binfo->bi_intfreq;
-}
-
-int m8xx_wdt_get_timeout(void)
-{
-	return wdt_timeout;
-}
diff --git a/arch/ppc/syslib/m8xx_wdt.h b/arch/ppc/syslib/m8xx_wdt.h
deleted file mode 100644
index e75835f0012b..000000000000
--- a/arch/ppc/syslib/m8xx_wdt.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Author: Florian Schirmer <jolt@tuxbox.org>
- *
- * 2002 (c) Florian Schirmer <jolt@tuxbox.org> This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef _PPC_SYSLIB_M8XX_WDT_H
-#define _PPC_SYSLIB_M8XX_WDT_H
-
-extern int m8xx_has_internal_rtc;
-
-extern void m8xx_wdt_handler_install(bd_t * binfo);
-extern int m8xx_wdt_get_timeout(void);
-extern void m8xx_wdt_reset(void);
-extern void m8xx_wdt_install_timer(void);
-extern void m8xx_wdt_stop_timer(void);
-
-#endif				/* _PPC_SYSLIB_M8XX_WDT_H */
diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c
deleted file mode 100644
index 437a294527a9..000000000000
--- a/arch/ppc/syslib/mpc10x_common.c
+++ /dev/null
@@ -1,654 +0,0 @@
-/*
- * Common routines for the Motorola SPS MPC106, MPC107 and MPC8240 Host bridge,
- * Mem ctlr, EPIC, etc.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * *** WARNING - A BAT MUST be set to access the PCI config addr/data regs ***
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/serial_8250.h>
-#include <linux/fsl_devices.h>
-#include <linux/device.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
-#include <asm/mpc10x.h>
-#include <asm/ppc_sys.h>
-
-#ifdef CONFIG_MPC10X_OPENPIC
-#ifdef CONFIG_EPIC_SERIAL_MODE
-#define EPIC_IRQ_BASE (epic_serial_mode ? 16 : 5)
-#else
-#define EPIC_IRQ_BASE 5
-#endif
-#define MPC10X_I2C_IRQ (EPIC_IRQ_BASE + NUM_8259_INTERRUPTS)
-#define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS)
-#define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS)
-#define MPC10X_UART0_IRQ (EPIC_IRQ_BASE + 4 + NUM_8259_INTERRUPTS)
-#define MPC10X_UART1_IRQ (EPIC_IRQ_BASE + 5 + NUM_8259_INTERRUPTS)
-#else
-#define MPC10X_I2C_IRQ -1
-#define MPC10X_DMA0_IRQ -1
-#define MPC10X_DMA1_IRQ -1
-#define MPC10X_UART0_IRQ -1
-#define MPC10X_UART1_IRQ -1
-#endif
-
-static struct fsl_i2c_platform_data mpc10x_i2c_pdata = {
-	.device_flags		= 0,
-};
-
-static struct plat_serial8250_port serial_plat_uart0[] = {
-	[0] = {
-		.mapbase	= 0x4500,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-static struct plat_serial8250_port serial_plat_uart1[] = {
-	[0] = {
-		.mapbase	= 0x4600,
-		.iotype		= UPIO_MEM,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-	},
-	{ },
-};
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[MPC10X_IIC1] = {
-		.name 	= "fsl-i2c",
-		.id	= 1,
-		.dev.platform_data = &mpc10x_i2c_pdata,
-		.num_resources = 2,
-		.resource = (struct resource[]) {
-			{
-				.start 	= MPC10X_EUMB_I2C_OFFSET,
-				.end	= MPC10X_EUMB_I2C_OFFSET +
-		                            MPC10X_EUMB_I2C_SIZE - 1,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.flags 	= IORESOURCE_IRQ
-			},
-		},
-	},
-	[MPC10X_DMA0] = {
-		.name	= "fsl-dma",
-		.id	= 0,
-		.num_resources = 2,
-		.resource = (struct resource[]) {
-			{
-				.start 	= MPC10X_EUMB_DMA_OFFSET + 0x10,
-				.end	= MPC10X_EUMB_DMA_OFFSET + 0x1f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC10X_DMA1] = {
-		.name	= "fsl-dma",
-		.id	= 1,
-		.num_resources = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC10X_EUMB_DMA_OFFSET + 0x20,
-				.end	= MPC10X_EUMB_DMA_OFFSET + 0x2f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC10X_DMA1] = {
-		.name	= "fsl-dma",
-		.id	= 1,
-		.num_resources = 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= MPC10X_EUMB_DMA_OFFSET + 0x20,
-				.end	= MPC10X_EUMB_DMA_OFFSET + 0x2f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC10X_UART0] = {
-		.name = "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM,
-		.dev.platform_data = serial_plat_uart0,
-	},
-	[MPC10X_UART1] = {
-		.name = "serial8250",
-		.id	= PLAT8250_DEV_PLATFORM1,
-		.dev.platform_data = serial_plat_uart1,
-	},
-
-};
-
-/* We use the PCI ID to match on */
-struct ppc_sys_spec *cur_ppc_sys_spec;
-struct ppc_sys_spec ppc_sys_specs[] = {
-	{
-		.ppc_sys_name 	= "8245",
-		.mask		= 0xFFFFFFFF,
-		.value		= MPC10X_BRIDGE_8245,
-		.num_devices	= 5,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, MPC10X_UART0, MPC10X_UART1,
-		},
-	},
-	{
-		.ppc_sys_name 	= "8240",
-		.mask		= 0xFFFFFFFF,
-		.value		= MPC10X_BRIDGE_8240,
-		.num_devices	= 3,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1,
-		},
-	},
-	{
-		.ppc_sys_name	= "107",
-		.mask		= 0xFFFFFFFF,
-		.value		= MPC10X_BRIDGE_107,
-		.num_devices	= 3,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1,
-		},
-	},
-	{       /* default match */
-		.ppc_sys_name   = "",
-		.mask           = 0x00000000,
-		.value          = 0x00000000,
-	},
-};
-
-/*
- * mach_mpc10x_fixup: This function enables DUART mode if it detects
- * if it detects two UARTS in the platform device entries.
- */
-static int __init mach_mpc10x_fixup(struct platform_device *pdev)
-{
-	if (strncmp (pdev->name, "serial8250", 10) == 0 && pdev->id == 1)
-		writeb(readb(serial_plat_uart1[0].membase + 0x11) | 0x1,
-				serial_plat_uart1[0].membase + 0x11);
-	return 0;
-}
-
-static int __init mach_mpc10x_init(void)
-{
-	ppc_sys_device_fixup = mach_mpc10x_fixup;
-	return 0;
-}
-postcore_initcall(mach_mpc10x_init);
-
-/* Set resources to match bridge memory map */
-void __init
-mpc10x_bridge_set_resources(int map, struct pci_controller *hose)
-{
-
-	switch (map) {
-		case MPC10X_MEM_MAP_A:
-			pci_init_resource(&hose->io_resource,
-					0x00000000,
-					0x3f7fffff,
-					IORESOURCE_IO,
-					"PCI host bridge");
-
-			pci_init_resource (&hose->mem_resources[0],
-					0xc0000000,
-					0xfeffffff,
-					IORESOURCE_MEM,
-					"PCI host bridge");
-			break;
-		case MPC10X_MEM_MAP_B:
-			pci_init_resource(&hose->io_resource,
-					0x00000000,
-					0x00bfffff,
-					IORESOURCE_IO,
-					"PCI host bridge");
-
-			pci_init_resource (&hose->mem_resources[0],
-					0x80000000,
-					0xfcffffff,
-					IORESOURCE_MEM,
-					"PCI host bridge");
-			break;
-		default:
-			printk("mpc10x_bridge_set_resources: "
-					"Invalid map specified\n");
-			if (ppc_md.progress)
-				ppc_md.progress("mpc10x:exit1", 0x100);
-	}
-}
-
-/*
- * Do some initialization and put the EUMB registers at the specified address
- * (also map the EPIC registers into virtual space--OpenPIC_Addr will be set).
- *
- * The EPIC is not on the 106, only the 8240 and 107.
- */
-int __init
-mpc10x_bridge_init(struct pci_controller *hose,
-		   uint current_map,
-		   uint new_map,
-		   uint phys_eumb_base)
-{
-	int	host_bridge, picr1, picr1_bit, i;
-	ulong	pci_config_addr, pci_config_data;
-	u_char	pir, byte;
-
-	if (ppc_md.progress) ppc_md.progress("mpc10x:enter", 0x100);
-
-	/* Set up for current map so we can get at config regs */
-	switch (current_map) {
-		case MPC10X_MEM_MAP_A:
-			setup_indirect_pci(hose,
-					   MPC10X_MAPA_CNFG_ADDR,
-					   MPC10X_MAPA_CNFG_DATA);
-			break;
-		case MPC10X_MEM_MAP_B:
-			setup_indirect_pci(hose,
-					   MPC10X_MAPB_CNFG_ADDR,
-					   MPC10X_MAPB_CNFG_DATA);
-			break;
-		default:
-			printk("mpc10x_bridge_init: %s\n",
-				"Invalid current map specified");
-			if (ppc_md.progress)
-				ppc_md.progress("mpc10x:exit1", 0x100);
-			return -1;
-	}
-
-	/* Make sure it's a supported bridge */
-	early_read_config_dword(hose,
-			        0,
-			        PCI_DEVFN(0,0),
-			        PCI_VENDOR_ID,
-			        &host_bridge);
-
-	switch (host_bridge) {
-		case MPC10X_BRIDGE_106:
-		case MPC10X_BRIDGE_8240:
-		case MPC10X_BRIDGE_107:
-		case MPC10X_BRIDGE_8245:
-			break;
-		default:
-			if (ppc_md.progress)
-				ppc_md.progress("mpc10x:exit2", 0x100);
-			return -1;
-	}
-
-	switch (new_map) {
-		case MPC10X_MEM_MAP_A:
-			MPC10X_SETUP_HOSE(hose, A);
-			pci_config_addr = MPC10X_MAPA_CNFG_ADDR;
-			pci_config_data = MPC10X_MAPA_CNFG_DATA;
-			picr1_bit = MPC10X_CFG_PICR1_ADDR_MAP_A;
-			break;
-		case MPC10X_MEM_MAP_B:
-			MPC10X_SETUP_HOSE(hose, B);
-			pci_config_addr = MPC10X_MAPB_CNFG_ADDR;
-			pci_config_data = MPC10X_MAPB_CNFG_DATA;
-			picr1_bit = MPC10X_CFG_PICR1_ADDR_MAP_B;
-			break;
-		default:
-			printk("mpc10x_bridge_init: %s\n",
-				"Invalid new map specified");
-			if (ppc_md.progress)
-				ppc_md.progress("mpc10x:exit3", 0x100);
-			return -1;
-	}
-
-	/* Make bridge use the 'new_map', if not already usng it */
-	if (current_map != new_map) {
-		early_read_config_dword(hose,
-					0,
-					PCI_DEVFN(0,0),
-					MPC10X_CFG_PICR1_REG,
-					&picr1);
-
-		picr1 = (picr1 & ~MPC10X_CFG_PICR1_ADDR_MAP_MASK) |
-			 picr1_bit;
-
-		early_write_config_dword(hose,
-					 0,
-					 PCI_DEVFN(0,0),
-					 MPC10X_CFG_PICR1_REG,
-					 picr1);
-
-		asm volatile("sync");
-
-		/* Undo old mappings & map in new cfg data/addr regs */
-		iounmap((void *)hose->cfg_addr);
-		iounmap((void *)hose->cfg_data);
-
-		setup_indirect_pci(hose,
-				   pci_config_addr,
-				   pci_config_data);
-	}
-
-	/* Setup resources to match map */
-	mpc10x_bridge_set_resources(new_map, hose);
-
-	/*
-	 * Want processor accesses of 0xFDxxxxxx to be mapped
-	 * to PCI memory space at 0x00000000.  Do not want
-	 * host bridge to respond to PCI memory accesses of
-	 * 0xFDxxxxxx.  Do not want host bridge to respond
-	 * to PCI memory addresses 0xFD000000-0xFDFFFFFF;
-	 * want processor accesses from 0x000A0000-0x000BFFFF
-	 * to be forwarded to system memory.
-	 *
-	 * Only valid if not in agent mode and using MAP B.
-	 */
-	if (new_map == MPC10X_MEM_MAP_B) {
-		early_read_config_byte(hose,
-				       0,
-				       PCI_DEVFN(0,0),
-				       MPC10X_CFG_MAPB_OPTIONS_REG,
-				       &byte);
-
-		byte &= ~(MPC10X_CFG_MAPB_OPTIONS_PFAE  |
-			  MPC10X_CFG_MAPB_OPTIONS_PCICH |
-			  MPC10X_CFG_MAPB_OPTIONS_PROCCH);
-
-		if (host_bridge != MPC10X_BRIDGE_106) {
-			byte |= MPC10X_CFG_MAPB_OPTIONS_CFAE;
-		}
-
-		early_write_config_byte(hose,
-					0,
-					PCI_DEVFN(0,0),
-					MPC10X_CFG_MAPB_OPTIONS_REG,
-					byte);
-	}
-
-	if (host_bridge != MPC10X_BRIDGE_106) {
-		early_read_config_byte(hose,
-				       0,
-				       PCI_DEVFN(0,0),
-				       MPC10X_CFG_PIR_REG,
-				       &pir);
-
-		if (pir != MPC10X_CFG_PIR_HOST_BRIDGE) {
-			printk("Host bridge in Agent mode\n");
-			/* Read or Set LMBAR & PCSRBAR? */
-		}
-
-		/* Set base addr of the 8240/107 EUMB.  */
-		early_write_config_dword(hose,
-					 0,
-					 PCI_DEVFN(0,0),
-					 MPC10X_CFG_EUMBBAR,
-					 phys_eumb_base);
-#ifdef CONFIG_MPC10X_OPENPIC
-		/* Map EPIC register part of EUMB into vitual memory  - PCORE
-		   uses an i8259 instead of EPIC. */
-		OpenPIC_Addr =
-			ioremap(phys_eumb_base + MPC10X_EUMB_EPIC_OFFSET,
-				MPC10X_EUMB_EPIC_SIZE);
-#endif
-	}
-
-#ifdef CONFIG_MPC10X_STORE_GATHERING
-	mpc10x_enable_store_gathering(hose);
-#else
-	mpc10x_disable_store_gathering(hose);
-#endif
-
-	/* setup platform devices for MPC10x bridges */
-	identify_ppc_sys_by_id (host_bridge);
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		unsigned int dev_id = cur_ppc_sys_spec->device_list[i];
-		ppc_sys_fixup_mem_resource(&ppc_sys_platform_devices[dev_id],
-			phys_eumb_base);
-	}
-
-	/* IRQs are determined at runtime */
-	ppc_sys_platform_devices[MPC10X_IIC1].resource[1].start = MPC10X_I2C_IRQ;
-	ppc_sys_platform_devices[MPC10X_IIC1].resource[1].end = MPC10X_I2C_IRQ;
-	ppc_sys_platform_devices[MPC10X_DMA0].resource[1].start = MPC10X_DMA0_IRQ;
-	ppc_sys_platform_devices[MPC10X_DMA0].resource[1].end = MPC10X_DMA0_IRQ;
-	ppc_sys_platform_devices[MPC10X_DMA1].resource[1].start = MPC10X_DMA1_IRQ;
-	ppc_sys_platform_devices[MPC10X_DMA1].resource[1].end = MPC10X_DMA1_IRQ;
-
-	serial_plat_uart0[0].mapbase += phys_eumb_base;
-	serial_plat_uart0[0].irq = MPC10X_UART0_IRQ;
-	serial_plat_uart0[0].membase = ioremap(serial_plat_uart0[0].mapbase, 0x100);
-
-	serial_plat_uart1[0].mapbase += phys_eumb_base;
-	serial_plat_uart1[0].irq = MPC10X_UART1_IRQ;
-	serial_plat_uart1[0].membase = ioremap(serial_plat_uart1[0].mapbase, 0x100);
-
-	/*
-	 * 8240 erratum 26, 8241/8245 erratum 29, 107 erratum 23: speculative
-	 * PCI reads may return stale data so turn off.
-	 */
-	if ((host_bridge == MPC10X_BRIDGE_8240)
-		|| (host_bridge == MPC10X_BRIDGE_8245)
-		|| (host_bridge == MPC10X_BRIDGE_107)) {
-
-		early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
-			MPC10X_CFG_PICR1_REG, &picr1);
-
-		picr1 &= ~MPC10X_CFG_PICR1_SPEC_PCI_RD;
-
-		early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
-			MPC10X_CFG_PICR1_REG, picr1);
-	}
-
-	/*
-	 * 8241/8245 erratum 28: PCI reads from local memory may return
-	 * stale data.  Workaround by setting PICR2[0] to disable copyback
-	 * optimization.  Oddly, the latest available user manual for the
-	 * 8245 (Rev 2., dated 10/2003) says PICR2[0] is reserverd.
-	 */
-	if (host_bridge == MPC10X_BRIDGE_8245) {
-		u32	picr2;
-
-		early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
-			MPC10X_CFG_PICR2_REG, &picr2);
-
-		picr2 |= MPC10X_CFG_PICR2_COPYBACK_OPT;
-
-		early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
-			 MPC10X_CFG_PICR2_REG, picr2);
-	}
-
-	if (ppc_md.progress) ppc_md.progress("mpc10x:exit", 0x100);
-	return 0;
-}
-
-/*
- * Need to make our own PCI config space access macros because
- * mpc10x_get_mem_size() is called before the data structures are set up for
- * the 'early_xxx' and 'indirect_xxx' routines to work.
- * Assumes bus 0.
- */
-#define MPC10X_CFG_read(val, addr, type, op)	*val = op((type)(addr))
-#define MPC10X_CFG_write(val, addr, type, op)	op((type *)(addr), (val))
-
-#define MPC10X_PCI_OP(rw, size, type, op, mask)			 	\
-static void								\
-mpc10x_##rw##_config_##size(uint *cfg_addr, uint *cfg_data, int devfn, int offset, type val) \
-{									\
-	out_be32(cfg_addr, 						\
-		 ((offset & 0xfc) << 24) | (devfn << 16)		\
-		 | (0 << 8) | 0x80);					\
-	MPC10X_CFG_##rw(val, cfg_data + (offset & mask), type, op);	\
-	return;    					 		\
-}
-
-MPC10X_PCI_OP(read,  byte,  u8 *, in_8, 3)
-MPC10X_PCI_OP(read,  dword, u32 *, in_le32, 0)
-#if 0	/* Not used */
-MPC10X_PCI_OP(write, byte,  u8, out_8, 3)
-MPC10X_PCI_OP(read,  word,  u16 *, in_le16, 2)
-MPC10X_PCI_OP(write, word,  u16, out_le16, 2)
-MPC10X_PCI_OP(write, dword, u32, out_le32, 0)
-#endif
-
-/*
- * Read the memory controller registers to determine the amount of memory in
- * the system.  This assumes that the firmware has correctly set up the memory
- * controller registers.
- */
-unsigned long __init
-mpc10x_get_mem_size(uint mem_map)
-{
-	uint			*config_addr, *config_data, val;
-	ulong			start, end, total, offset;
-	int			i;
-	u_char			bank_enables;
-
-	switch (mem_map) {
-		case MPC10X_MEM_MAP_A:
-			config_addr = (uint *)MPC10X_MAPA_CNFG_ADDR;
-			config_data = (uint *)MPC10X_MAPA_CNFG_DATA;
-			break;
-		case MPC10X_MEM_MAP_B:
-			config_addr = (uint *)MPC10X_MAPB_CNFG_ADDR;
-			config_data = (uint *)MPC10X_MAPB_CNFG_DATA;
-			break;
-		default:
-			return 0;
-	}
-
-	mpc10x_read_config_byte(config_addr,
-				config_data,
-				PCI_DEVFN(0,0),
-			        MPC10X_MCTLR_MEM_BANK_ENABLES,
-			        &bank_enables);
-
-	total = 0;
-
-	for (i=0; i<8; i++) {
-		if (bank_enables & (1 << i)) {
-			offset = MPC10X_MCTLR_MEM_START_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr,
-						 config_data,
-						 PCI_DEVFN(0,0),
-						 offset,
-						 &val);
-			start = (val >> ((i & 3) << 3)) & 0xff;
-
-			offset = MPC10X_MCTLR_EXT_MEM_START_1 + ((i>3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr,
-						 config_data,
-						 PCI_DEVFN(0,0),
-						 offset,
-						 &val);
-			val = (val >> ((i & 3) << 3)) & 0x03;
-			start = (val << 28) | (start << 20);
-
-			offset = MPC10X_MCTLR_MEM_END_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr,
-						 config_data,
-						 PCI_DEVFN(0,0),
-						 offset,
-						 &val);
-			end = (val >> ((i & 3) << 3)) & 0xff;
-
-			offset = MPC10X_MCTLR_EXT_MEM_END_1 + ((i > 3) ? 4 : 0);
-			mpc10x_read_config_dword(config_addr,
-						 config_data,
-						 PCI_DEVFN(0,0),
-						 offset,
-						 &val);
-			val = (val >> ((i & 3) << 3)) & 0x03;
-			end = (val << 28) | (end << 20) | 0xfffff;
-
-			total += (end - start + 1);
-		}
-	}
-
-	return total;
-}
-
-int __init
-mpc10x_enable_store_gathering(struct pci_controller *hose)
-{
-	uint picr1;
-
-	early_read_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-			        MPC10X_CFG_PICR1_REG,
-			        &picr1);
-
-	picr1 |= MPC10X_CFG_PICR1_ST_GATH_EN;
-
-	early_write_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-				MPC10X_CFG_PICR1_REG,
-				picr1);
-
-	return 0;
-}
-
-int __init
-mpc10x_disable_store_gathering(struct pci_controller *hose)
-{
-	uint picr1;
-
-	early_read_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-			        MPC10X_CFG_PICR1_REG,
-			        &picr1);
-
-	picr1 &= ~MPC10X_CFG_PICR1_ST_GATH_EN;
-
-	early_write_config_dword(hose,
-				0,
-				PCI_DEVFN(0,0),
-				MPC10X_CFG_PICR1_REG,
-				picr1);
-
-	return 0;
-}
-
-#ifdef CONFIG_MPC10X_OPENPIC
-void __init mpc10x_set_openpic(void)
-{
-	/* Map external IRQs */
-	openpic_set_sources(0, EPIC_IRQ_BASE, OpenPIC_Addr + 0x10200);
-	/* Skip reserved space and map i2c and DMA Ch[01] */
-	openpic_set_sources(EPIC_IRQ_BASE, 3, OpenPIC_Addr + 0x11020);
-	/* Skip reserved space and map Message Unit Interrupt (I2O) */
-	openpic_set_sources(EPIC_IRQ_BASE + 3, 1, OpenPIC_Addr + 0x110C0);
-	/* Skip reserved space and map Serial Interrupts */
-	openpic_set_sources(EPIC_IRQ_BASE + 4, 2, OpenPIC_Addr + 0x11120);
-
-	openpic_init(NUM_8259_INTERRUPTS);
-}
-#endif
diff --git a/arch/ppc/syslib/mpc52xx_devices.c b/arch/ppc/syslib/mpc52xx_devices.c
deleted file mode 100644
index 7487539a4e92..000000000000
--- a/arch/ppc/syslib/mpc52xx_devices.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * Freescale MPC52xx device descriptions
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Copyright (C) 2005 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/fsl_devices.h>
-#include <linux/resource.h>
-#include <linux/platform_device.h>
-#include <asm/mpc52xx.h>
-#include <asm/ppc_sys.h>
-
-
-static u64 mpc52xx_dma_mask = 0xffffffffULL;
-
-static struct fsl_i2c_platform_data mpc52xx_fsl_i2c_pdata = {
-	.device_flags = FSL_I2C_DEV_CLOCK_5200,
-};
-
-
-/* We use relative offsets for IORESOURCE_MEM to be independent from the
- * MBAR location at compile time
- */
-
-/* TODO Add the BestComm initiator channel to the device definitions,
-   possibly using IORESOURCE_DMA. But that's when BestComm is ready ... */
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[MPC52xx_MSCAN1] = {
-		.name		= "mpc52xx-mscan",
-		.id		= 0,
-		.num_resources	= 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x0900,
-				.end	= 0x097f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_MSCAN1_IRQ,
-				.end	= MPC52xx_MSCAN1_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_MSCAN2] = {
-		.name		= "mpc52xx-mscan",
-		.id		= 1,
-		.num_resources	= 2,
-		.resource = (struct resource[]) {
-			{
-				.start	= 0x0980,
-				.end	= 0x09ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_MSCAN2_IRQ,
-				.end	= MPC52xx_MSCAN2_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_SPI] = {
-		.name		= "mpc52xx-spi",
-		.id		= -1,
-		.num_resources	= 3,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x0f00,
-				.end	= 0x0f1f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "modf",
-				.start	= MPC52xx_SPI_MODF_IRQ,
-				.end	= MPC52xx_SPI_MODF_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-			{
-				.name	= "spif",
-				.start	= MPC52xx_SPI_SPIF_IRQ,
-				.end	= MPC52xx_SPI_SPIF_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_USB] = {
-		.name		= "ppc-soc-ohci",
-		.id		= -1,
-		.num_resources	= 2,
-		.dev.dma_mask	= &mpc52xx_dma_mask,
-		.dev.coherent_dma_mask = 0xffffffffULL,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x1000,
-				.end	= 0x10ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_USB_IRQ,
-				.end	= MPC52xx_USB_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_BDLC] = {
-		.name		= "mpc52xx-bdlc",
-		.id		= -1,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x1300,
-				.end	= 0x130f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_BDLC_IRQ,
-				.end	= MPC52xx_BDLC_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC1] = {
-		.name		= "mpc52xx-psc",
-		.id		= 0,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2000,
-				.end	= 0x209f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC1_IRQ,
-				.end	= MPC52xx_PSC1_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC2] = {
-		.name		= "mpc52xx-psc",
-		.id		= 1,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2200,
-				.end	= 0x229f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC2_IRQ,
-				.end	= MPC52xx_PSC2_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC3] = {
-		.name		= "mpc52xx-psc",
-		.id		= 2,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2400,
-				.end	= 0x249f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC3_IRQ,
-				.end	= MPC52xx_PSC3_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC4] = {
-		.name		= "mpc52xx-psc",
-		.id		= 3,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2600,
-				.end	= 0x269f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC4_IRQ,
-				.end	= MPC52xx_PSC4_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC5] = {
-		.name		= "mpc52xx-psc",
-		.id		= 4,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2800,
-				.end	= 0x289f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC5_IRQ,
-				.end	= MPC52xx_PSC5_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_PSC6] = {
-		.name		= "mpc52xx-psc",
-		.id		= 5,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x2c00,
-				.end	= 0x2c9f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_PSC6_IRQ,
-				.end	= MPC52xx_PSC6_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_FEC] = {
-		.name		= "mpc52xx-fec",
-		.id		= -1,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x3000,
-				.end	= 0x33ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_FEC_IRQ,
-				.end	= MPC52xx_FEC_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_ATA] = {
-		.name		= "mpc52xx-ata",
-		.id		= -1,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x3a00,
-				.end	= 0x3aff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_ATA_IRQ,
-				.end	= MPC52xx_ATA_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_I2C1] = {
-		.name		= "fsl-i2c",
-		.id		= 0,
-		.dev.platform_data = &mpc52xx_fsl_i2c_pdata,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x3d00,
-				.end	= 0x3d1f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_I2C1_IRQ,
-				.end	= MPC52xx_I2C1_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC52xx_I2C2] = {
-		.name		= "fsl-i2c",
-		.id		= 1,
-		.dev.platform_data = &mpc52xx_fsl_i2c_pdata,
-		.num_resources	= 2,
-		.resource	= (struct resource[]) {
-			{
-				.start	= 0x3d40,
-				.end	= 0x3d5f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= MPC52xx_I2C2_IRQ,
-				.end	= MPC52xx_I2C2_IRQ,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-};
-
-
-static int __init mach_mpc52xx_fixup(struct platform_device *pdev)
-{
-	ppc_sys_fixup_mem_resource(pdev, MPC52xx_MBAR);
-	return 0;
-}
-
-static int __init mach_mpc52xx_init(void)
-{
-	ppc_sys_device_fixup = mach_mpc52xx_fixup;
-	return 0;
-}
-
-postcore_initcall(mach_mpc52xx_init);
diff --git a/arch/ppc/syslib/mpc52xx_pci.c b/arch/ppc/syslib/mpc52xx_pci.c
deleted file mode 100644
index 20a0eac0dc3a..000000000000
--- a/arch/ppc/syslib/mpc52xx_pci.c
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * PCI code for the Freescale MPC52xx embedded CPU.
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-
-#include <asm/pci.h>
-
-#include <asm/mpc52xx.h>
-#include "mpc52xx_pci.h"
-
-#include <asm/delay.h>
-#include <asm/machdep.h>
-
-
-/* This macro is defined to activate the workaround for the bug
-   435 of the MPC5200 (L25R). With it activated, we don't do any
-   32 bits configuration access during type-1 cycles */
-#define MPC5200_BUG_435_WORKAROUND
-
-
-static int
-mpc52xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-				int offset, int len, u32 *val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	u32 value;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	out_be32(hose->cfg_addr,
-		(1 << 31) |
-		((bus->number - hose->bus_offset) << 16) |
-		(devfn << 8) |
-		(offset & 0xfc));
-	mb();
-
-#ifdef MPC5200_BUG_435_WORKAROUND
-	if (bus->number != hose->bus_offset) {
-		switch (len) {
-			case 1:
-				value = in_8(((u8 __iomem *)hose->cfg_data) + (offset & 3));
-				break;
-			case 2:
-				value = in_le16(((u16 __iomem *)hose->cfg_data) + ((offset>>1) & 1));
-				break;
-
-			default:
-				value = in_le16((u16 __iomem *)hose->cfg_data) |
-					(in_le16(((u16 __iomem *)hose->cfg_data) + 1) << 16);
-				break;
-		}
-	}
-	else
-#endif
-	{
-		value = in_le32(hose->cfg_data);
-
-		if (len != 4) {
-			value >>= ((offset & 0x3) << 3);
-			value &= 0xffffffff >> (32 - (len << 3));
-		}
-	}
-
-	*val = value;
-
-	out_be32(hose->cfg_addr, 0);
-	mb();
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-mpc52xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-				int offset, int len, u32 val)
-{
-	struct pci_controller *hose = bus->sysdata;
-	u32 value, mask;
-
-	if (ppc_md.pci_exclude_device)
-		if (ppc_md.pci_exclude_device(bus->number, devfn))
-			return PCIBIOS_DEVICE_NOT_FOUND;
-
-	out_be32(hose->cfg_addr,
-		(1 << 31) |
-		((bus->number - hose->bus_offset) << 16) |
-		(devfn << 8) |
-		(offset & 0xfc));
-	mb();
-
-#ifdef MPC5200_BUG_435_WORKAROUND
-	if (bus->number != hose->bus_offset) {
-		switch (len) {
-			case 1:
-				out_8(((u8 __iomem *)hose->cfg_data) +
-					(offset & 3), val);
-				break;
-			case 2:
-				out_le16(((u16 __iomem *)hose->cfg_data) +
-					((offset>>1) & 1), val);
-				break;
-
-			default:
-				out_le16((u16 __iomem *)hose->cfg_data,
-					(u16)val);
-				out_le16(((u16 __iomem *)hose->cfg_data) + 1,
-					(u16)(val>>16));
-				break;
-		}
-	}
-	else
-#endif
-	{
-		if (len != 4) {
-			value = in_le32(hose->cfg_data);
-
-			offset = (offset & 0x3) << 3;
-			mask = (0xffffffff >> (32 - (len << 3)));
-			mask <<= offset;
-
-			value &= ~mask;
-			val = value | ((val << offset) & mask);
-		}
-
-		out_le32(hose->cfg_data, val);
-	}
-	mb();
-
-	out_be32(hose->cfg_addr, 0);
-	mb();
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops mpc52xx_pci_ops = {
-	.read  = mpc52xx_pci_read_config,
-	.write = mpc52xx_pci_write_config
-};
-
-
-static void __init
-mpc52xx_pci_setup(struct mpc52xx_pci __iomem *pci_regs)
-{
-	u32 tmp;
-
-	/* Setup control regs */
-	tmp = in_be32(&pci_regs->scr);
-	tmp |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	out_be32(&pci_regs->scr, tmp);
-
-	/* Setup windows */
-	out_be32(&pci_regs->iw0btar, MPC52xx_PCI_IWBTAR_TRANSLATION(
-		MPC52xx_PCI_MEM_START + MPC52xx_PCI_MEM_OFFSET,
-		MPC52xx_PCI_MEM_START,
-		MPC52xx_PCI_MEM_SIZE ));
-
-	out_be32(&pci_regs->iw1btar, MPC52xx_PCI_IWBTAR_TRANSLATION(
-		MPC52xx_PCI_MMIO_START + MPC52xx_PCI_MEM_OFFSET,
-		MPC52xx_PCI_MMIO_START,
-		MPC52xx_PCI_MMIO_SIZE ));
-
-	out_be32(&pci_regs->iw2btar, MPC52xx_PCI_IWBTAR_TRANSLATION(
-		MPC52xx_PCI_IO_BASE,
-		MPC52xx_PCI_IO_START,
-		MPC52xx_PCI_IO_SIZE ));
-
-	out_be32(&pci_regs->iwcr, MPC52xx_PCI_IWCR_PACK(
-		( MPC52xx_PCI_IWCR_ENABLE |		/* iw0btar */
-		  MPC52xx_PCI_IWCR_READ_MULTI |
-		  MPC52xx_PCI_IWCR_MEM ),
-		( MPC52xx_PCI_IWCR_ENABLE |		/* iw1btar */
-		  MPC52xx_PCI_IWCR_READ |
-		  MPC52xx_PCI_IWCR_MEM ),
-		( MPC52xx_PCI_IWCR_ENABLE |		/* iw2btar */
-		  MPC52xx_PCI_IWCR_IO )
-	));
-
-
-	out_be32(&pci_regs->tbatr0,
-		MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_IO );
-	out_be32(&pci_regs->tbatr1,
-		MPC52xx_PCI_TBATR_ENABLE | MPC52xx_PCI_TARGET_MEM );
-
-	out_be32(&pci_regs->tcr, MPC52xx_PCI_TCR_LD);
-
-	/* Reset the exteral bus ( internal PCI controller is NOT resetted ) */
-	/* Not necessary and can be a bad thing if for example the bootloader
-	   is displaying a splash screen or ... Just left here for
-	   documentation purpose if anyone need it */
-	tmp = in_be32(&pci_regs->gscr);
-#if 0
-	out_be32(&pci_regs->gscr, tmp | MPC52xx_PCI_GSCR_PR);
-	udelay(50);
-#endif
-	out_be32(&pci_regs->gscr, tmp & ~MPC52xx_PCI_GSCR_PR);
-}
-
-static void
-mpc52xx_pci_fixup_resources(struct pci_dev *dev)
-{
-	int i;
-
-	/* We don't rely on boot loader for PCI and resets all
-	   devices */
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		struct resource *res = &dev->resource[i];
-		if (res->end > res->start) {	/* Only valid resources */
-			res->end -= res->start;
-			res->start = 0;
-			res->flags |= IORESOURCE_UNSET;
-		}
-	}
-
-	/* The PCI Host bridge of MPC52xx has a prefetch memory resource
-	   fixed to 1Gb. Doesn't fit in the resource system so we remove it */
-	if ( (dev->vendor == PCI_VENDOR_ID_MOTOROLA) &&
-	     (   dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200
-	      || dev->device == PCI_DEVICE_ID_MOTOROLA_MPC5200B) ) {
-		struct resource *res = &dev->resource[1];
-		res->start = res->end = res->flags = 0;
-	}
-}
-
-void __init
-mpc52xx_find_bridges(void)
-{
-	struct mpc52xx_pci __iomem *pci_regs;
-	struct pci_controller *hose;
-
-	pci_assign_all_buses = 1;
-
-	pci_regs = ioremap(MPC52xx_PA(MPC52xx_PCI_OFFSET), MPC52xx_PCI_SIZE);
-	if (!pci_regs)
-		return;
-
-	hose = pcibios_alloc_controller();
-	if (!hose) {
-		iounmap(pci_regs);
-		return;
-	}
-
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pcibios_fixup_resources = mpc52xx_pci_fixup_resources;
-
-	hose->first_busno = 0;
-	hose->last_busno = 0xff;
-	hose->bus_offset = 0;
-	hose->ops = &mpc52xx_pci_ops;
-
-	mpc52xx_pci_setup(pci_regs);
-
-	hose->pci_mem_offset = MPC52xx_PCI_MEM_OFFSET;
-
-	hose->io_base_virt = ioremap(MPC52xx_PCI_IO_BASE, MPC52xx_PCI_IO_SIZE);
-	isa_io_base = (unsigned long) hose->io_base_virt;
-
-	hose->cfg_addr = &pci_regs->car;
-	hose->cfg_data = hose->io_base_virt;
-
-	/* Setup resources */
-	pci_init_resource(&hose->mem_resources[0],
-			MPC52xx_PCI_MEM_START,
-			MPC52xx_PCI_MEM_STOP,
-			IORESOURCE_MEM|IORESOURCE_PREFETCH,
-			"PCI prefetchable memory");
-
-	pci_init_resource(&hose->mem_resources[1],
-			MPC52xx_PCI_MMIO_START,
-			MPC52xx_PCI_MMIO_STOP,
-			IORESOURCE_MEM,
-			"PCI memory");
-
-	pci_init_resource(&hose->io_resource,
-			MPC52xx_PCI_IO_START,
-			MPC52xx_PCI_IO_STOP,
-			IORESOURCE_IO,
-			"PCI I/O");
-
-}
diff --git a/arch/ppc/syslib/mpc52xx_pci.h b/arch/ppc/syslib/mpc52xx_pci.h
deleted file mode 100644
index 77d47dbba85e..000000000000
--- a/arch/ppc/syslib/mpc52xx_pci.h
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * PCI Include file the Freescale MPC52xx embedded cpu chips
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Inspired from code written by Dale Farnsworth <dfarnsworth@mvista.com>
- * for the 2.4 kernel.
- *
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __SYSLIB_MPC52xx_PCI_H__
-#define __SYSLIB_MPC52xx_PCI_H__
-
-/* ======================================================================== */
-/* PCI windows config                                                       */
-/* ======================================================================== */
-
-/*
- * Master windows : MPC52xx -> PCI
- *
- *  0x80000000 -> 0x9FFFFFFF       PCI Mem prefetchable          IW0BTAR
- *  0xA0000000 -> 0xAFFFFFFF       PCI Mem                       IW1BTAR
- *  0xB0000000 -> 0xB0FFFFFF       PCI IO                        IW2BTAR
- *
- * Slave windows  : PCI -> MPC52xx
- *
- *  0xF0000000 -> 0xF003FFFF       MPC52xx MBAR                  TBATR0
- *  0x00000000 -> 0x3FFFFFFF       MPC52xx local memory          TBATR1
- */
-
-#define MPC52xx_PCI_MEM_OFFSET 	0x00000000	/* Offset for MEM MMIO */
-
-#define MPC52xx_PCI_MEM_START	0x80000000
-#define MPC52xx_PCI_MEM_SIZE	0x20000000
-#define MPC52xx_PCI_MEM_STOP	(MPC52xx_PCI_MEM_START+MPC52xx_PCI_MEM_SIZE-1)
-
-#define MPC52xx_PCI_MMIO_START	0xa0000000
-#define MPC52xx_PCI_MMIO_SIZE	0x10000000
-#define MPC52xx_PCI_MMIO_STOP	(MPC52xx_PCI_MMIO_START+MPC52xx_PCI_MMIO_SIZE-1)
-
-#define MPC52xx_PCI_IO_BASE	0xb0000000
-
-#define MPC52xx_PCI_IO_START	0x00000000
-#define MPC52xx_PCI_IO_SIZE	0x01000000
-#define MPC52xx_PCI_IO_STOP	(MPC52xx_PCI_IO_START+MPC52xx_PCI_IO_SIZE-1)
-
-
-#define MPC52xx_PCI_TARGET_IO	MPC52xx_MBAR
-#define MPC52xx_PCI_TARGET_MEM	0x00000000
-
-
-/* ======================================================================== */
-/* Structures mapping & Defines for PCI Unit                                */
-/* ======================================================================== */
-
-#define MPC52xx_PCI_GSCR_BM		0x40000000
-#define MPC52xx_PCI_GSCR_PE		0x20000000
-#define MPC52xx_PCI_GSCR_SE		0x10000000
-#define MPC52xx_PCI_GSCR_XLB2PCI_MASK	0x07000000
-#define MPC52xx_PCI_GSCR_XLB2PCI_SHIFT	24
-#define MPC52xx_PCI_GSCR_IPG2PCI_MASK	0x00070000
-#define MPC52xx_PCI_GSCR_IPG2PCI_SHIFT	16
-#define MPC52xx_PCI_GSCR_BME		0x00004000
-#define MPC52xx_PCI_GSCR_PEE		0x00002000
-#define MPC52xx_PCI_GSCR_SEE		0x00001000
-#define MPC52xx_PCI_GSCR_PR		0x00000001
-
-
-#define MPC52xx_PCI_IWBTAR_TRANSLATION(proc_ad,pci_ad,size)	  \
-		( ( (proc_ad) & 0xff000000 )			| \
-		  ( (((size) - 1) >> 8) & 0x00ff0000 )		| \
-		  ( ((pci_ad) >> 16) & 0x0000ff00 ) )
-
-#define MPC52xx_PCI_IWCR_PACK(win0,win1,win2)	(((win0) << 24) | \
-						 ((win1) << 16) | \
-						 ((win2) <<  8))
-
-#define MPC52xx_PCI_IWCR_DISABLE	0x0
-#define MPC52xx_PCI_IWCR_ENABLE		0x1
-#define MPC52xx_PCI_IWCR_READ		0x0
-#define MPC52xx_PCI_IWCR_READ_LINE	0x2
-#define MPC52xx_PCI_IWCR_READ_MULTI	0x4
-#define MPC52xx_PCI_IWCR_MEM		0x0
-#define MPC52xx_PCI_IWCR_IO		0x8
-
-#define MPC52xx_PCI_TCR_P		0x01000000
-#define MPC52xx_PCI_TCR_LD		0x00010000
-
-#define MPC52xx_PCI_TBATR_DISABLE	0x0
-#define MPC52xx_PCI_TBATR_ENABLE	0x1
-
-
-#ifndef __ASSEMBLY__
-
-struct mpc52xx_pci {
-	u32	idr;		/* PCI + 0x00 */
-	u32	scr;		/* PCI + 0x04 */
-	u32	ccrir;		/* PCI + 0x08 */
-	u32	cr1;		/* PCI + 0x0C */
-	u32	bar0;		/* PCI + 0x10 */
-	u32	bar1;		/* PCI + 0x14 */
-	u8	reserved1[16];	/* PCI + 0x18 */
-	u32	ccpr;		/* PCI + 0x28 */
-	u32	sid;		/* PCI + 0x2C */
-	u32	erbar;		/* PCI + 0x30 */
-	u32	cpr;		/* PCI + 0x34 */
-	u8	reserved2[4];	/* PCI + 0x38 */
-	u32	cr2;		/* PCI + 0x3C */
-	u8	reserved3[32];	/* PCI + 0x40 */
-	u32	gscr;		/* PCI + 0x60 */
-	u32	tbatr0;		/* PCI + 0x64 */
-	u32	tbatr1;		/* PCI + 0x68 */
-	u32	tcr;		/* PCI + 0x6C */
-	u32	iw0btar;	/* PCI + 0x70 */
-	u32	iw1btar;	/* PCI + 0x74 */
-	u32	iw2btar;	/* PCI + 0x78 */
-	u8	reserved4[4];	/* PCI + 0x7C */
-	u32	iwcr;		/* PCI + 0x80 */
-	u32	icr;		/* PCI + 0x84 */
-	u32	isr;		/* PCI + 0x88 */
-	u32	arb;		/* PCI + 0x8C */
-	u8	reserved5[104];	/* PCI + 0x90 */
-	u32	car;		/* PCI + 0xF8 */
-	u8	reserved6[4];	/* PCI + 0xFC */
-};
-
-#endif  /* __ASSEMBLY__ */
-
-
-#endif  /* __SYSLIB_MPC52xx_PCI_H__ */
diff --git a/arch/ppc/syslib/mpc52xx_pic.c b/arch/ppc/syslib/mpc52xx_pic.c
deleted file mode 100644
index f58149c03b0f..000000000000
--- a/arch/ppc/syslib/mpc52xx_pic.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * Programmable Interrupt Controller functions for the Freescale MPC52xx 
- * embedded CPU.
- *
- * 
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Based on (well, mostly copied from) the code from the 2.4 kernel by
- * Dale Farnsworth <dfarnsworth@mvista.com> and Kent Borg.
- * 
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 Montavista Software, Inc
- * 
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/mpc52xx.h>
-
-
-static struct mpc52xx_intr __iomem *intr;
-static struct mpc52xx_sdma __iomem *sdma;
-
-static void
-mpc52xx_ic_disable(unsigned int irq)
-{
-	u32 val;
-
-	if (irq == MPC52xx_IRQ0) {
-		val = in_be32(&intr->ctrl);
-		val &= ~(1 << 11);
-		out_be32(&intr->ctrl, val);
-	}
-	else if (irq < MPC52xx_IRQ1) {
-		BUG();
-	}
-	else if (irq <= MPC52xx_IRQ3) {
-		val = in_be32(&intr->ctrl);
-		val &= ~(1 << (10 - (irq - MPC52xx_IRQ1)));
-		out_be32(&intr->ctrl, val);
-	}
-	else if (irq < MPC52xx_SDMA_IRQ_BASE) {
-		val = in_be32(&intr->main_mask);
-		val |= 1 << (16 - (irq - MPC52xx_MAIN_IRQ_BASE));
-		out_be32(&intr->main_mask, val);
-	}
-	else if (irq < MPC52xx_PERP_IRQ_BASE) {
-		val = in_be32(&sdma->IntMask);
-		val |= 1 << (irq - MPC52xx_SDMA_IRQ_BASE);
-		out_be32(&sdma->IntMask, val);
-	}
-	else {
-		val = in_be32(&intr->per_mask);
-		val |= 1 << (31 - (irq - MPC52xx_PERP_IRQ_BASE));
-		out_be32(&intr->per_mask, val);
-	}
-}
-
-static void
-mpc52xx_ic_enable(unsigned int irq)
-{
-	u32 val;
-
-	if (irq == MPC52xx_IRQ0) {
-		val = in_be32(&intr->ctrl);
-		val |= 1 << 11;
-		out_be32(&intr->ctrl, val);
-	}
-	else if (irq < MPC52xx_IRQ1) {
-		BUG();
-	}
-	else if (irq <= MPC52xx_IRQ3) {
-		val = in_be32(&intr->ctrl);
-		val |= 1 << (10 - (irq - MPC52xx_IRQ1));
-		out_be32(&intr->ctrl, val);
-	}
-	else if (irq < MPC52xx_SDMA_IRQ_BASE) {
-		val = in_be32(&intr->main_mask);
-		val &= ~(1 << (16 - (irq - MPC52xx_MAIN_IRQ_BASE)));
-		out_be32(&intr->main_mask, val);
-	}
-	else if (irq < MPC52xx_PERP_IRQ_BASE) {
-		val = in_be32(&sdma->IntMask);
-		val &= ~(1 << (irq - MPC52xx_SDMA_IRQ_BASE));
-		out_be32(&sdma->IntMask, val);
-	}
-	else {
-		val = in_be32(&intr->per_mask);
-		val &= ~(1 << (31 - (irq - MPC52xx_PERP_IRQ_BASE)));
-		out_be32(&intr->per_mask, val);
-	}
-}
-
-static void
-mpc52xx_ic_ack(unsigned int irq)
-{
-	u32 val;
-
-	/*
-	 * Only some irqs are reset here, others in interrupting hardware.
-	 */
-
-	switch (irq) {
-	case MPC52xx_IRQ0:
-		val = in_be32(&intr->ctrl);
-		val |= 0x08000000;
-		out_be32(&intr->ctrl, val);
-		break;
-	case MPC52xx_CCS_IRQ:
-		val = in_be32(&intr->enc_status);
-		val |= 0x00000400;
-		out_be32(&intr->enc_status, val);
-		break;
-	case MPC52xx_IRQ1:
-		val = in_be32(&intr->ctrl);
-		val |= 0x04000000;
-		out_be32(&intr->ctrl, val);
-		break;
-	case MPC52xx_IRQ2:
-		val = in_be32(&intr->ctrl);
-		val |= 0x02000000;
-		out_be32(&intr->ctrl, val);
-		break;
-	case MPC52xx_IRQ3:
-		val = in_be32(&intr->ctrl);
-		val |= 0x01000000;
-		out_be32(&intr->ctrl, val);
-		break;
-	default:
-		if (irq >= MPC52xx_SDMA_IRQ_BASE
-		    && irq < (MPC52xx_SDMA_IRQ_BASE + MPC52xx_SDMA_IRQ_NUM)) {
-			out_be32(&sdma->IntPend,
-				 1 << (irq - MPC52xx_SDMA_IRQ_BASE));
-		}
-		break;
-	}
-}
-
-static void
-mpc52xx_ic_disable_and_ack(unsigned int irq)
-{
-	mpc52xx_ic_disable(irq);
-	mpc52xx_ic_ack(irq);
-}
-
-static void
-mpc52xx_ic_end(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		mpc52xx_ic_enable(irq);
-}
-
-static struct hw_interrupt_type mpc52xx_ic = {
-	.typename	= " MPC52xx  ",
-	.enable		= mpc52xx_ic_enable,
-	.disable	= mpc52xx_ic_disable,
-	.ack		= mpc52xx_ic_disable_and_ack,
-	.end		= mpc52xx_ic_end,
-};
-
-void __init
-mpc52xx_init_irq(void)
-{
-	int i;
-	u32 intr_ctrl;
-
-	/* Remap the necessary zones */
-	intr = ioremap(MPC52xx_PA(MPC52xx_INTR_OFFSET), MPC52xx_INTR_SIZE);
-	sdma = ioremap(MPC52xx_PA(MPC52xx_SDMA_OFFSET), MPC52xx_SDMA_SIZE);
-
-	if ((intr==NULL) || (sdma==NULL))
-		panic("Can't ioremap PIC/SDMA register for init_irq !");
-
-	/* Disable all interrupt sources. */
-	out_be32(&sdma->IntPend, 0xffffffff);	/* 1 means clear pending */
-	out_be32(&sdma->IntMask, 0xffffffff);	/* 1 means disabled */
-	out_be32(&intr->per_mask, 0x7ffffc00);	/* 1 means disabled */
-	out_be32(&intr->main_mask, 0x00010fff);	/* 1 means disabled */
-	intr_ctrl = in_be32(&intr->ctrl);
-	intr_ctrl &=    0x00ff0000;	/* Keeps IRQ[0-3] config */
-	intr_ctrl |=	0x0f000000 |	/* clear IRQ 0-3 */
-			0x00001000 |	/* MEE master external enable */
-			0x00000000 |	/* 0 means disable IRQ 0-3 */
-			0x00000001;	/* CEb route critical normally */
-	out_be32(&intr->ctrl, intr_ctrl);
-
-	/* Zero a bunch of the priority settings.  */
-	out_be32(&intr->per_pri1, 0);
-	out_be32(&intr->per_pri2, 0);
-	out_be32(&intr->per_pri3, 0);
-	out_be32(&intr->main_pri1, 0);
-	out_be32(&intr->main_pri2, 0);
-
-	/* Initialize irq_desc[i].chip's with mpc52xx_ic. */
-	for (i = 0; i < NR_IRQS; i++) {
-		irq_desc[i].chip = &mpc52xx_ic;
-		irq_desc[i].status = IRQ_LEVEL;
-	}
-
-	#define IRQn_MODE(intr_ctrl,irq) (((intr_ctrl) >> (22-(i<<1))) & 0x03)
-	for (i=0 ; i<4 ; i++) {
-		int mode;
-		mode = IRQn_MODE(intr_ctrl,i);
-		if ((mode == 0x1) || (mode == 0x2))
-			irq_desc[i?MPC52xx_IRQ1+i-1:MPC52xx_IRQ0].status = 0;
-	}
-}
-
-int
-mpc52xx_get_irq(void)
-{
-	u32 status;
-	int irq = -1;
-
-	status = in_be32(&intr->enc_status);
-
-	if (status & 0x00000400) {		/* critical */
-		irq = (status >> 8) & 0x3;
-		if (irq == 2)			/* high priority peripheral */
-			goto peripheral;
-		irq += MPC52xx_CRIT_IRQ_BASE;
-	}
-	else if (status & 0x00200000) {		/* main */
-		irq = (status >> 16) & 0x1f;
-		if (irq == 4)			/* low priority peripheral */
-			goto peripheral;
-		irq += MPC52xx_MAIN_IRQ_BASE;
-	}
-	else if (status & 0x20000000) {		/* peripheral */
-peripheral:
-		irq = (status >> 24) & 0x1f;
-		if (irq == 0) {			/* bestcomm */
-			status = in_be32(&sdma->IntPend);
-			irq = ffs(status) + MPC52xx_SDMA_IRQ_BASE-1;
-		}
-		else
-			irq += MPC52xx_PERP_IRQ_BASE;
-	}
-
-	return irq;
-}
-
diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c
deleted file mode 100644
index ab0cf4ced9e5..000000000000
--- a/arch/ppc/syslib/mpc52xx_setup.c
+++ /dev/null
@@ -1,313 +0,0 @@
-/*
- * Common code for the boards based on Freescale MPC52xx embedded CPU.
- *
- * 
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Support for other bootloaders than UBoot by Dale Farnsworth 
- * <dfarnsworth@mvista.com>
- * 
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 Montavista Software, Inc
- * 
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-
-#include <linux/spinlock.h>
-#include <asm/io.h>
-#include <asm/time.h>
-#include <asm/mpc52xx.h>
-#include <asm/mpc52xx_psc.h>
-#include <asm/pgtable.h>
-#include <asm/ppcboot.h>
-
-#include <syslib/mpc52xx_pci.h>
-
-extern bd_t __res;
-
-static int core_mult[] = {		/* CPU Frequency multiplier, taken    */
-	0,  0,  0,  10, 20, 20, 25, 45,	/* from the datasheet used to compute */
-	30, 55, 40, 50, 0,  60, 35, 0,	/* CPU frequency from XLB freq and    */
-	30, 25, 65, 10, 70, 20, 75, 45,	/* external jumper config             */
-	0,  55, 40, 50, 80, 60, 35, 0
-};
-
-void
-mpc52xx_restart(char *cmd)
-{
-	struct mpc52xx_gpt __iomem *gpt0 = MPC52xx_VA(MPC52xx_GPTx_OFFSET(0));
-
-	local_irq_disable();
-
-	/* Turn on the watchdog and wait for it to expire. It effectively
-	  does a reset */
-	out_be32(&gpt0->count, 0x000000ff);
-	out_be32(&gpt0->mode, 0x00009004);
-
-	while (1);
-}
-
-void
-mpc52xx_halt(void)
-{
-	local_irq_disable();
-
-	while (1);
-}
-
-void
-mpc52xx_power_off(void)
-{
-	/* By default we don't have any way of shut down.
-	   If a specific board wants to, it can set the power down
-	   code to any hardware implementation dependent code */
-	mpc52xx_halt();
-}
-
-
-void __init
-mpc52xx_set_bat(void)
-{
-	/* Set BAT 2 to map the 0xf0000000 area */
-	/* This mapping is used during mpc52xx_progress,
-	 * mpc52xx_find_end_of_memory, and UARTs/GPIO access for debug
-	 */
-	mb();
-	mtspr(SPRN_DBAT2U, 0xf0001ffe);
-	mtspr(SPRN_DBAT2L, 0xf000002a);
-	mb();
-}
-
-void __init
-mpc52xx_map_io(void)
-{
-	/* Here we map the MBAR and the whole upper zone. MBAR is only
-	   64k but we can't map only 64k with BATs. Map the whole
-	   0xf0000000 range is ok and helps eventual lpb devices placed there */
-	io_block_mapping(
-		MPC52xx_MBAR_VIRT, MPC52xx_MBAR, 0x10000000, _PAGE_IO);
-}
-
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-#ifndef MPC52xx_PF_CONSOLE_PORT
-#error "mpc52xx PSC for console not selected"
-#endif
-
-static void
-mpc52xx_psc_putc(struct mpc52xx_psc __iomem *psc, unsigned char c)
-{
-	while (!(in_be16(&psc->mpc52xx_psc_status) &
-	         MPC52xx_PSC_SR_TXRDY));
-	out_8(&psc->mpc52xx_psc_buffer_8, c);
-}
-
-void
-mpc52xx_progress(char *s, unsigned short hex)
-{
-	char c;
-	struct mpc52xx_psc __iomem *psc;
-
-	psc = MPC52xx_VA(MPC52xx_PSCx_OFFSET(MPC52xx_PF_CONSOLE_PORT));
-
-	while ((c = *s++) != 0) {
-		if (c == '\n')
-			mpc52xx_psc_putc(psc, '\r');
-		mpc52xx_psc_putc(psc, c);
-	}
-
-	mpc52xx_psc_putc(psc, '\r');
-	mpc52xx_psc_putc(psc, '\n');
-}
-
-#endif  /* CONFIG_SERIAL_TEXT_DEBUG */
-
-
-unsigned long __init
-mpc52xx_find_end_of_memory(void)
-{
-	u32 ramsize = __res.bi_memsize;
-
-	/*
-	 * if bootloader passed a memsize, just use it
-	 * else get size from sdram config registers
-	 */
-	if (ramsize == 0) {
-		struct mpc52xx_mmap_ctl __iomem *mmap_ctl;
-		u32 sdram_config_0, sdram_config_1;
-
-		/* Temp BAT2 mapping active when this is called ! */
-		mmap_ctl = MPC52xx_VA(MPC52xx_MMAP_CTL_OFFSET);
-
-		sdram_config_0 = in_be32(&mmap_ctl->sdram0);
-		sdram_config_1 = in_be32(&mmap_ctl->sdram1);
-
-		if ((sdram_config_0 & 0x1f) >= 0x13)
-			ramsize = 1 << ((sdram_config_0 & 0xf) + 17);
-
-		if (((sdram_config_1 & 0x1f) >= 0x13) &&
-				((sdram_config_1 & 0xfff00000) == ramsize))
-			ramsize += 1 << ((sdram_config_1 & 0xf) + 17);
-	}
-
-	return ramsize;
-}
-
-void __init
-mpc52xx_calibrate_decr(void)
-{
-	int current_time, previous_time;
-	int tbl_start, tbl_end;
-	unsigned int xlbfreq, cpufreq, ipbfreq, pcifreq, divisor;
-
-	xlbfreq = __res.bi_busfreq;
-	/* if bootloader didn't pass bus frequencies, calculate them */
-	if (xlbfreq == 0) {
-		/* Get RTC & Clock manager modules */
-		struct mpc52xx_rtc __iomem *rtc;
-		struct mpc52xx_cdm __iomem *cdm;
-
-		rtc = ioremap(MPC52xx_PA(MPC52xx_RTC_OFFSET), MPC52xx_RTC_SIZE);
-		cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
-
-		if ((rtc==NULL) || (cdm==NULL))
-			panic("Can't ioremap RTC/CDM while computing bus freq");
-
-		/* Count bus clock during 1/64 sec */
-		out_be32(&rtc->dividers, 0x8f1f0000);	/* Set RTC 64x faster */
-		previous_time = in_be32(&rtc->time);
-		while ((current_time = in_be32(&rtc->time)) == previous_time) ;
-		tbl_start = get_tbl();
-		previous_time = current_time;
-		while ((current_time = in_be32(&rtc->time)) == previous_time) ;
-		tbl_end = get_tbl();
-		out_be32(&rtc->dividers, 0xffff0000);	/* Restore RTC */
-
-		/* Compute all frequency from that & CDM settings */
-		xlbfreq = (tbl_end - tbl_start) << 8;
-		cpufreq = (xlbfreq * core_mult[in_be32(&cdm->rstcfg)&0x1f])/10;
-		ipbfreq = (in_8(&cdm->ipb_clk_sel) & 1) ?
-					xlbfreq / 2 : xlbfreq;
-		switch (in_8(&cdm->pci_clk_sel) & 3) {
-		case 0:
-			pcifreq = ipbfreq;
-			break;
-		case 1:
-			pcifreq = ipbfreq / 2;
-			break;
-		default:
-			pcifreq = xlbfreq / 4;
-			break;
-		}
-		__res.bi_busfreq = xlbfreq;
-		__res.bi_intfreq = cpufreq;
-		__res.bi_ipbfreq = ipbfreq;
-		__res.bi_pcifreq = pcifreq;
-
-		/* Release mapping */
-		iounmap(rtc);
-		iounmap(cdm);
-	}
-
-	divisor = 4;
-
-	tb_ticks_per_jiffy = xlbfreq / HZ / divisor;
-	tb_to_us = mulhwu_scale_factor(xlbfreq / divisor, 1000000);
-}
-
-
-void __init
-mpc52xx_setup_cpu(void)
-{
-	struct mpc52xx_cdm  __iomem *cdm;
-	struct mpc52xx_xlb  __iomem *xlb;
-
-	/* Map zones */
-	cdm  = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
-	xlb  = ioremap(MPC52xx_PA(MPC52xx_XLB_OFFSET), MPC52xx_XLB_SIZE);
-
-	if (!cdm || !xlb) {
-		printk(KERN_ERR __FILE__ ": "
-			"Error while mapping CDM/XLB during "
-			"mpc52xx_setup_cpu\n");
-		goto unmap_regs;
-	}
-
-	/* Use internal 48 Mhz */
-	out_8(&cdm->ext_48mhz_en, 0x00);
-	out_8(&cdm->fd_enable, 0x01);
-	if (in_be32(&cdm->rstcfg) & 0x40)	/* Assumes 33Mhz clock */
-		out_be16(&cdm->fd_counters, 0x0001);
-	else
-		out_be16(&cdm->fd_counters, 0x5555);
-
-	/* Configure the XLB Arbiter priorities */
-	out_be32(&xlb->master_pri_enable, 0xff);
-	out_be32(&xlb->master_priority, 0x11111111);
-
-	/* Enable ram snooping for 1GB window */
-	out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_SNOOP);
-	out_be32(&xlb->snoop_window, MPC52xx_PCI_TARGET_MEM | 0x1d);
-
-	/* Disable XLB pipelining */
-	/* (cfr errata 292. We could do this only just before ATA PIO
-	    transaction and re-enable it after ...) */
-	out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS);
-
-	/* Unmap reg zone */
-unmap_regs:
-	if (cdm)  iounmap(cdm);
-	if (xlb)  iounmap(xlb);
-}
-
-
-int mpc52xx_match_psc_function(int psc_idx, const char *func)
-{
-	struct mpc52xx_psc_func *cf = mpc52xx_psc_functions;
-
-	while ((cf->id != -1) && (cf->func != NULL)) {
-		if ((cf->id == psc_idx) && !strcmp(cf->func,func))
-			return 1;
-		cf++;
-	}
-
-	return 0;
-}
-
-int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv)
-{
-	static DEFINE_SPINLOCK(lock);
-	struct mpc52xx_cdm __iomem *cdm;
-	unsigned long flags;
-	u16 mclken_div;
-	u16 __iomem *reg;
-	u32 mask;
-
-	cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE);
-	if (!cdm) {
-		printk(KERN_ERR __FILE__ ": Error mapping CDM\n");
-		return -ENODEV;
-	}
-
-	mclken_div = 0x8000 | (clkdiv & 0x1FF);
-	switch (psc_id) {
-	case 1: reg = &cdm->mclken_div_psc1; mask = 0x20; break;
-	case 2: reg = &cdm->mclken_div_psc2; mask = 0x40; break;
-	case 3: reg = &cdm->mclken_div_psc3; mask = 0x80; break;
-	case 6: reg = &cdm->mclken_div_psc6; mask = 0x10; break;
-	default:
-		return -ENODEV;
-	}
-
-	/* Set the rate and enable the clock */
-	spin_lock_irqsave(&lock, flags);
-	out_be16(reg, mclken_div);
-	out_be32(&cdm->clk_enables, in_be32(&cdm->clk_enables) | mask);
-	spin_unlock_irqrestore(&lock, flags);
-
-	iounmap(cdm);
-	return 0;
-}
diff --git a/arch/ppc/syslib/mpc52xx_sys.c b/arch/ppc/syslib/mpc52xx_sys.c
deleted file mode 100644
index b4e6f978f057..000000000000
--- a/arch/ppc/syslib/mpc52xx_sys.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Freescale MPC52xx system descriptions
- *
- *
- * Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
- * Copyright (C) 2005 Sylvain Munaut <tnt@246tNt.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <asm/ppc_sys.h>
-
-struct ppc_sys_spec *cur_ppc_sys_spec;
-struct ppc_sys_spec ppc_sys_specs[] = {
-	{
-		.ppc_sys_name	= "5200",
-		.mask		= 0xffff0000,
-		.value		= 0x80110000,
-		.num_devices	= 15,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC52xx_MSCAN1, MPC52xx_MSCAN2, MPC52xx_SPI,
-			MPC52xx_USB, MPC52xx_BDLC, MPC52xx_PSC1, MPC52xx_PSC2,
-			MPC52xx_PSC3, MPC52xx_PSC4, MPC52xx_PSC5, MPC52xx_PSC6,
-			MPC52xx_FEC, MPC52xx_ATA, MPC52xx_I2C1, MPC52xx_I2C2,
-		},
-	},
-	{	/* default match */
-		.ppc_sys_name	= "",
-		.mask		= 0x00000000,
-		.value		= 0x00000000,
-	},
-};
diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c
deleted file mode 100644
index 80804eee5795..000000000000
--- a/arch/ppc/syslib/mpc8xx_devices.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * MPC8xx Device descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug<vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include <linux/mii.h>
-#include <asm/cpm1.h>
-#include <asm/mpc8xx.h>
-#include <asm/irq.h>
-#include <asm/ppc_sys.h>
-
-/* We use offsets for IORESOURCE_MEM to do not set dependencies at compile time.
- * They will get fixed up by mach_mpc8xx_fixup
- */
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[MPC8xx_CPM_FEC1] =	{
-		.name = "fsl-cpm-fec",
-		.id	= 1,
-		.num_resources = 2,
-		.resource = (struct resource[])	{
-			{
-				.name 	= "regs",
-				.start	= 0xe00,
-				.end	= 0xe88,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_FEC1,
-				.end	= MPC8xx_INT_FEC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_FEC2] =	{
-		.name = "fsl-cpm-fec",
-		.id	= 2,
-		.num_resources = 2,
-		.resource = (struct resource[])	{
-			{
-				.name	= "regs",
-				.start	= 0x1e00,
-				.end	= 0x1e88,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_FEC2,
-				.end	= MPC8xx_INT_FEC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SCC1] = {
-		.name = "fsl-cpm-scc",
-		.id	= 1,
-		.num_resources = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa00,
-				.end	= 0xa18,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name 	= "pram",
-				.start 	= 0x3c00,
-				.end 	= 0x3c7f,
-				.flags 	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SCC1,
-				.end	= MPC8xx_INT_SCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SCC2] = {
-		.name = "fsl-cpm-scc",
-		.id	= 2,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa20,
-				.end	= 0xa38,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name 	= "pram",
-				.start 	= 0x3d00,
-				.end 	= 0x3d7f,
-				.flags 	= IORESOURCE_MEM,
-			},
-
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SCC2,
-				.end	= MPC8xx_INT_SCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SCC3] = {
-		.name = "fsl-cpm-scc",
-		.id	= 3,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa40,
-				.end	= 0xa58,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name 	= "pram",
-				.start 	= 0x3e00,
-				.end 	= 0x3e7f,
-				.flags 	= IORESOURCE_MEM,
-			},
-
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SCC3,
-				.end	= MPC8xx_INT_SCC3,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SCC4] = {
-		.name = "fsl-cpm-scc",
-		.id	= 4,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa60,
-				.end	= 0xa78,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name 	= "pram",
-				.start 	= 0x3f00,
-				.end 	= 0x3f7f,
-				.flags 	= IORESOURCE_MEM,
-			},
-
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SCC4,
-				.end	= MPC8xx_INT_SCC4,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SMC1] = {
-		.name = "fsl-cpm-smc",
-		.id	= 1,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa80,
-				.end	= 0xa8f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x3e80,
-				.end	= 0x3ebf,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SMC1,
-				.end	= MPC8xx_INT_SMC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC8xx_CPM_SMC2] = {
-		.name = "fsl-cpm-smc",
-		.id	= 2,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0xa90,
-				.end	= 0xa9f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
- 				.name	= "pram",
- 				.start	= 0x3f80,
- 				.end	= 0x3fbf,
- 				.flags	= IORESOURCE_MEM,
-
-			},
-			{
-				.name	= "interrupt",
-				.start	= MPC8xx_INT_SMC2,
-				.end	= MPC8xx_INT_SMC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-
-        [MPC8xx_MDIO_FEC] = {
-                .name = "fsl-cpm-fec-mdio",
-                .id = 0,
-                .num_resources = 0,
-
-        },
-
-};
-
-static int __init mach_mpc8xx_fixup(struct platform_device *pdev)
-{
-	ppc_sys_fixup_mem_resource (pdev, IMAP_ADDR);
-	return 0;
-}
-
-static int __init mach_mpc8xx_init(void)
-{
-	ppc_sys_device_fixup = mach_mpc8xx_fixup;
-	return 0;
-}
-
-postcore_initcall(mach_mpc8xx_init);
diff --git a/arch/ppc/syslib/mpc8xx_sys.c b/arch/ppc/syslib/mpc8xx_sys.c
deleted file mode 100644
index 18ba1d7ff9f1..000000000000
--- a/arch/ppc/syslib/mpc8xx_sys.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * MPC8xx System descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 MontaVista Software, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <asm/ppc_sys.h>
-
-struct ppc_sys_spec *cur_ppc_sys_spec; 
-struct ppc_sys_spec ppc_sys_specs[] = {
-	{
-		.ppc_sys_name	= "MPC86X",
-		.mask 		= 0xFFFFFFFF,
-		.value 		= 0x00000000,
-		.num_devices	= 8,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC8xx_CPM_FEC1,
-			MPC8xx_CPM_SCC1,
-			MPC8xx_CPM_SCC2,
-			MPC8xx_CPM_SCC3,
-			MPC8xx_CPM_SCC4,
-			MPC8xx_CPM_SMC1,
-			MPC8xx_CPM_SMC2,
-			MPC8xx_MDIO_FEC,
-		},
-	},
-	{
-		.ppc_sys_name	= "MPC885",
-		.mask 		= 0xFFFFFFFF,
-		.value 		= 0x00000000,
-		.num_devices	= 9,
-		.device_list	= (enum ppc_sys_devices[])
-		{
-			MPC8xx_CPM_FEC1,
-			MPC8xx_CPM_FEC2,
-			MPC8xx_CPM_SCC1,
-			MPC8xx_CPM_SCC2,
-			MPC8xx_CPM_SCC3,
-			MPC8xx_CPM_SCC4,
-			MPC8xx_CPM_SMC1,
-			MPC8xx_CPM_SMC2,
-			MPC8xx_MDIO_FEC,
-		},
-	},
-	{	/* default match */
-		.ppc_sys_name	= "",
-		.mask 		= 0x00000000,
-		.value 		= 0x00000000,
-	},
-};
diff --git a/arch/ppc/syslib/mv64360_pic.c b/arch/ppc/syslib/mv64360_pic.c
deleted file mode 100644
index 2dd2dc5cd404..000000000000
--- a/arch/ppc/syslib/mv64360_pic.c
+++ /dev/null
@@ -1,423 +0,0 @@
-/*
- * Interrupt controller support for Marvell's MV64360.
- *
- * Author: Rabeeh Khoury <rabeeh@galileo.co.il>
- * Based on MV64360 PIC written by
- * Chris Zankel <chris@mvista.com>
- * Mark A. Greer <mgreer@mvista.com>
- *
- * Copyright 2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-/*
- * This file contains the specific functions to support the MV64360
- * interrupt controller.
- *
- * The MV64360 has two main interrupt registers (high and low) that
- * summarizes the interrupts generated by the units of the MV64360.
- * Each bit is assigned to an interrupt number, where the low register
- * are assigned from IRQ0 to IRQ31 and the high cause register
- * from IRQ32 to IRQ63
- * The GPP (General Purpose Pins) interrupts are assigned from IRQ64 (GPP0)
- * to IRQ95 (GPP31).
- * get_irq() returns the lowest interrupt number that is currently asserted.
- *
- * Note:
- *  - This driver does not initialize the GPP when used as an interrupt
- *    input.
- */
-
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/mv64x60.h>
-#include <asm/machdep.h>
-
-#ifdef CONFIG_IRQ_ALL_CPUS
-#error "The mv64360 does not support distribution of IRQs on all CPUs"
-#endif
-/* ========================== forward declaration ========================== */
-
-static void mv64360_unmask_irq(unsigned int);
-static void mv64360_mask_irq(unsigned int);
-static irqreturn_t mv64360_cpu_error_int_handler(int, void *);
-static irqreturn_t mv64360_sram_error_int_handler(int, void *);
-static irqreturn_t mv64360_pci_error_int_handler(int, void *);
-
-/* ========================== local declarations =========================== */
-
-struct hw_interrupt_type mv64360_pic = {
-	.typename = " mv64360  ",
-	.enable   = mv64360_unmask_irq,
-	.disable  = mv64360_mask_irq,
-	.ack      = mv64360_mask_irq,
-	.end      = mv64360_unmask_irq,
-};
-
-#define CPU_INTR_STR	"mv64360 cpu interface error"
-#define SRAM_INTR_STR	"mv64360 internal sram error"
-#define PCI0_INTR_STR	"mv64360 pci 0 error"
-#define PCI1_INTR_STR	"mv64360 pci 1 error"
-
-static struct mv64x60_handle bh;
-
-u32 mv64360_irq_base = 0;	/* MV64360 handles the next 96 IRQs from here */
-
-/* mv64360_init_irq()
- *
- * This function initializes the interrupt controller. It assigns
- * all interrupts from IRQ0 to IRQ95 to the mv64360 interrupt controller.
- *
- * Input Variable(s):
- *  None.
- *
- * Outpu. Variable(s):
- *  None.
- *
- * Returns:
- *  void
- *
- * Note:
- *  We register all GPP inputs as interrupt source, but disable them.
- */
-void __init
-mv64360_init_irq(void)
-{
-	int i;
-
-	if (ppc_md.progress)
-		ppc_md.progress("mv64360_init_irq: enter", 0x0);
-
-	bh.v_base = mv64x60_get_bridge_vbase();
-
-	ppc_cached_irq_mask[0] = 0;
-	ppc_cached_irq_mask[1] = 0x0f000000;	/* Enable GPP intrs */
-	ppc_cached_irq_mask[2] = 0;
-
-	/* disable all interrupts and clear current interrupts */
-	mv64x60_write(&bh, MV64x60_GPP_INTR_CAUSE, 0);
-	mv64x60_write(&bh, MV64x60_GPP_INTR_MASK, ppc_cached_irq_mask[2]);
-	mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,ppc_cached_irq_mask[0]);
-	mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,ppc_cached_irq_mask[1]);
-
-	/* All interrupts are level interrupts */
-	for (i = mv64360_irq_base; i < (mv64360_irq_base + 96); i++) {
-		irq_desc[i].status |= IRQ_LEVEL;
-		irq_desc[i].chip = &mv64360_pic;
-	}
-
-	if (ppc_md.progress)
-		ppc_md.progress("mv64360_init_irq: exit", 0x0);
-}
-
-/* mv64360_get_irq()
- *
- * This function returns the lowest interrupt number of all interrupts that
- * are currently asserted.
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  int	<interrupt number> or -2 (bogus interrupt)
- *
- */
-int
-mv64360_get_irq(void)
-{
-	int irq;
-	int irq_gpp;
-
-#ifdef CONFIG_SMP
-	/*
-	 * Second CPU gets only doorbell (message) interrupts.
-	 * The doorbell interrupt is BIT28 in the main interrupt low cause reg.
-	 */
-	int cpu_nr = smp_processor_id();
-	if (cpu_nr == 1) {
-		if (!(mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_LO) &
-		      (1 << MV64x60_IRQ_DOORBELL)))
-			return -1;
-		return mv64360_irq_base + MV64x60_IRQ_DOORBELL;
-	}
-#endif
-
-	irq = mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_LO);
-	irq = __ilog2((irq & 0x3dfffffe) & ppc_cached_irq_mask[0]);
-
-	if (irq == -1) {
-		irq = mv64x60_read(&bh, MV64360_IC_MAIN_CAUSE_HI);
-		irq = __ilog2((irq & 0x1f0003f7) & ppc_cached_irq_mask[1]);
-
-		if (irq == -1)
-			irq = -2; /* bogus interrupt, should never happen */
-		else {
-			if ((irq >= 24) && (irq < MV64x60_IRQ_DOORBELL)) {
-				irq_gpp = mv64x60_read(&bh,
-					MV64x60_GPP_INTR_CAUSE);
-				irq_gpp = __ilog2(irq_gpp &
-					ppc_cached_irq_mask[2]);
-
-				if (irq_gpp == -1)
-					irq = -2;
-				else {
-					irq = irq_gpp + 64;
-					mv64x60_write(&bh,
-						MV64x60_GPP_INTR_CAUSE,
-						~(1 << (irq - 64)));
-				}
-			}
-			else
-				irq += 32;
-		}
-	}
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_CAUSE);
-
-	if (irq < 0)
-		return (irq);
-	else
-		return (mv64360_irq_base + irq);
-}
-
-/* mv64360_unmask_irq()
- *
- * This function enables an interrupt.
- *
- * Input Variable(s):
- *  unsigned int	interrupt number (IRQ0...IRQ95).
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  void
- */
-static void
-mv64360_unmask_irq(unsigned int irq)
-{
-#ifdef CONFIG_SMP
-	/* second CPU gets only doorbell interrupts */
-	if ((irq - mv64360_irq_base) == MV64x60_IRQ_DOORBELL) {
-		mv64x60_set_bits(&bh, MV64360_IC_CPU1_INTR_MASK_LO,
-				 (1 << MV64x60_IRQ_DOORBELL));
-		return;
-	}
-#endif
-	irq -= mv64360_irq_base;
-
-	if (irq > 31) {
-		if (irq > 63) /* unmask GPP irq */
-			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
-				ppc_cached_irq_mask[2] |= (1 << (irq - 64)));
-		else /* mask high interrupt register */
-			mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,
-				ppc_cached_irq_mask[1] |= (1 << (irq - 32)));
-	}
-	else /* mask low interrupt register */
-		mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,
-			ppc_cached_irq_mask[0] |= (1 << irq));
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	return;
-}
-
-/* mv64360_mask_irq()
- *
- * This function disables the requested interrupt.
- *
- * Input Variable(s):
- *  unsigned int	interrupt number (IRQ0...IRQ95).
- *
- * Output Variable(s):
- *  None.
- *
- * Returns:
- *  void
- */
-static void
-mv64360_mask_irq(unsigned int irq)
-{
-#ifdef CONFIG_SMP
-	if ((irq - mv64360_irq_base) == MV64x60_IRQ_DOORBELL) {
-		mv64x60_clr_bits(&bh, MV64360_IC_CPU1_INTR_MASK_LO,
-				 (1 << MV64x60_IRQ_DOORBELL));
-		return;
-	}
-#endif
-	irq -= mv64360_irq_base;
-
-	if (irq > 31) {
-		if (irq > 63) /* mask GPP irq */
-			mv64x60_write(&bh, MV64x60_GPP_INTR_MASK,
-				ppc_cached_irq_mask[2] &= ~(1 << (irq - 64)));
-		else /* mask high interrupt register */
-			mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_HI,
-				ppc_cached_irq_mask[1] &= ~(1 << (irq - 32)));
-	}
-	else /* mask low interrupt register */
-		mv64x60_write(&bh, MV64360_IC_CPU0_INTR_MASK_LO,
-			ppc_cached_irq_mask[0] &= ~(1 << irq));
-
-	(void)mv64x60_read(&bh, MV64x60_GPP_INTR_MASK);
-	return;
-}
-
-static irqreturn_t
-mv64360_cpu_error_int_handler(int irq, void *dev_id)
-{
-	printk(KERN_ERR "mv64360_cpu_error_int_handler: %s 0x%08x\n",
-		"Error on CPU interface - Cause regiser",
-		mv64x60_read(&bh, MV64x60_CPU_ERR_CAUSE));
-	printk(KERN_ERR "\tCPU error register dump:\n");
-	printk(KERN_ERR "\tAddress low  0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_LO));
-	printk(KERN_ERR "\tAddress high 0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_ADDR_HI));
-	printk(KERN_ERR "\tData low     0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_LO));
-	printk(KERN_ERR "\tData high    0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_DATA_HI));
-	printk(KERN_ERR "\tParity       0x%08x\n",
-	       mv64x60_read(&bh, MV64x60_CPU_ERR_PARITY));
-	mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t
-mv64360_sram_error_int_handler(int irq, void *dev_id)
-{
-	printk(KERN_ERR "mv64360_sram_error_int_handler: %s 0x%08x\n",
-		"Error in internal SRAM - Cause register",
-		mv64x60_read(&bh, MV64360_SRAM_ERR_CAUSE));
-	printk(KERN_ERR "\tSRAM error register dump:\n");
-	printk(KERN_ERR "\tAddress Low  0x%08x\n",
-	       mv64x60_read(&bh, MV64360_SRAM_ERR_ADDR_LO));
-	printk(KERN_ERR "\tAddress High 0x%08x\n",
-	       mv64x60_read(&bh, MV64360_SRAM_ERR_ADDR_HI));
-	printk(KERN_ERR "\tData Low     0x%08x\n",
-	       mv64x60_read(&bh, MV64360_SRAM_ERR_DATA_LO));
-	printk(KERN_ERR "\tData High    0x%08x\n",
-	       mv64x60_read(&bh, MV64360_SRAM_ERR_DATA_HI));
-	printk(KERN_ERR "\tParity       0x%08x\n",
-		mv64x60_read(&bh, MV64360_SRAM_ERR_PARITY));
-	mv64x60_write(&bh, MV64360_SRAM_ERR_CAUSE, 0);
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t
-mv64360_pci_error_int_handler(int irq, void *dev_id)
-{
-	u32 val;
-	unsigned int pci_bus = (unsigned int)dev_id;
-
-	if (pci_bus == 0) {	/* Error on PCI 0 */
-		val = mv64x60_read(&bh, MV64x60_PCI0_ERR_CAUSE);
-		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
-			"mv64360_pci_error_int_handler", pci_bus);
-		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
-		printk(KERN_ERR "\tCause register 0x%08x\n", val);
-		printk(KERN_ERR "\tAddress Low    0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_LO));
-		printk(KERN_ERR "\tAddress High   0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_ADDR_HI));
-		printk(KERN_ERR "\tAttribute      0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_DATA_LO));
-		printk(KERN_ERR "\tCommand        0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI0_ERR_CMD));
-		mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, ~val);
-	}
-	if (pci_bus == 1) {	/* Error on PCI 1 */
-		val = mv64x60_read(&bh, MV64x60_PCI1_ERR_CAUSE);
-		printk(KERN_ERR "%s: Error in PCI %d Interface\n",
-			"mv64360_pci_error_int_handler", pci_bus);
-		printk(KERN_ERR "\tPCI %d error register dump:\n", pci_bus);
-		printk(KERN_ERR "\tCause register 0x%08x\n", val);
-		printk(KERN_ERR "\tAddress Low    0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_LO));
-		printk(KERN_ERR "\tAddress High   0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_ADDR_HI));
-		printk(KERN_ERR "\tAttribute      0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_DATA_LO));
-		printk(KERN_ERR "\tCommand        0x%08x\n",
-		       mv64x60_read(&bh, MV64x60_PCI1_ERR_CMD));
-		mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, ~val);
-	}
-	return IRQ_HANDLED;
-}
-
-/*
- * Bit 0 of MV64x60_PCIx_ERR_MASK does not exist on the 64360 and because of
- * errata FEr-#11 and FEr-##16 for the 64460, it should be 0 on that chip as
- * well.  IOW, don't set bit 0.
- */
-#define MV64360_PCI0_ERR_MASK_VAL	0x00a50c24
-
-static int __init
-mv64360_register_hdlrs(void)
-{
-	int	rc;
-
-	/* Clear old errors and register CPU interface error intr handler */
-	mv64x60_write(&bh, MV64x60_CPU_ERR_CAUSE, 0);
-	if ((rc = request_irq(MV64x60_IRQ_CPU_ERR + mv64360_irq_base,
-		mv64360_cpu_error_int_handler, IRQF_DISABLED, CPU_INTR_STR, NULL)))
-		printk(KERN_WARNING "Can't register cpu error handler: %d", rc);
-
-	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_CPU_ERR_MASK, 0x000000ff);
-
-	/* Clear old errors and register internal SRAM error intr handler */
-	mv64x60_write(&bh, MV64360_SRAM_ERR_CAUSE, 0);
-	if ((rc = request_irq(MV64360_IRQ_SRAM_PAR_ERR + mv64360_irq_base,
-		mv64360_sram_error_int_handler,IRQF_DISABLED,SRAM_INTR_STR, NULL)))
-		printk(KERN_WARNING "Can't register SRAM error handler: %d",rc);
-
-	/* Clear old errors and register PCI 0 error intr handler */
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_CAUSE, 0);
-	if ((rc = request_irq(MV64360_IRQ_PCI0 + mv64360_irq_base,
-			mv64360_pci_error_int_handler,
-			IRQF_DISABLED, PCI0_INTR_STR, (void *)0)))
-		printk(KERN_WARNING "Can't register pci 0 error handler: %d",
-			rc);
-
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_MASK, MV64360_PCI0_ERR_MASK_VAL);
-
-	/* Erratum FEr PCI-#16 says to clear bit 0 of PCI SERRn Mask reg. */
-	mv64x60_write(&bh, MV64x60_PCI0_ERR_SERR_MASK,
-		mv64x60_read(&bh, MV64x60_PCI0_ERR_SERR_MASK) & ~0x1UL);
-
-	/* Clear old errors and register PCI 1 error intr handler */
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_CAUSE, 0);
-	if ((rc = request_irq(MV64360_IRQ_PCI1 + mv64360_irq_base,
-			mv64360_pci_error_int_handler,
-			IRQF_DISABLED, PCI1_INTR_STR, (void *)1)))
-		printk(KERN_WARNING "Can't register pci 1 error handler: %d",
-			rc);
-
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, 0);
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_MASK, MV64360_PCI0_ERR_MASK_VAL);
-
-	/* Erratum FEr PCI-#16 says to clear bit 0 of PCI Intr Mask reg. */
-	mv64x60_write(&bh, MV64x60_PCI1_ERR_SERR_MASK,
-		mv64x60_read(&bh, MV64x60_PCI1_ERR_SERR_MASK) & ~0x1UL);
-
-	return 0;
-}
-
-arch_initcall(mv64360_register_hdlrs);
diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c
deleted file mode 100644
index 418f3053de52..000000000000
--- a/arch/ppc/syslib/mv64x60.c
+++ /dev/null
@@ -1,2485 +0,0 @@
-/*
- * Common routines for the Marvell/Galileo Discovery line of host bridges
- * (gt64260, mv64360, mv64460, ...).
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/mv643xx.h>
-#include <linux/platform_device.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/delay.h>
-#include <asm/mv64x60.h>
-
-
-u8 mv64x60_pci_exclude_bridge = 1;
-DEFINE_SPINLOCK(mv64x60_lock);
-
-static phys_addr_t 	mv64x60_bridge_pbase;
-static void 		__iomem *mv64x60_bridge_vbase;
-static u32		mv64x60_bridge_type = MV64x60_TYPE_INVALID;
-static u32		mv64x60_bridge_rev;
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-static struct pci_controller	sysfs_hose_a;
-#endif
-
-static u32 gt64260_translate_size(u32 base, u32 size, u32 num_bits);
-static u32 gt64260_untranslate_size(u32 base, u32 size, u32 num_bits);
-static void gt64260_set_pci2mem_window(struct pci_controller *hose, u32 bus,
-	u32 window, u32 base);
-static void gt64260_set_pci2regs_window(struct mv64x60_handle *bh,
-	struct pci_controller *hose, u32 bus, u32 base);
-static u32 gt64260_is_enabled_32bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_enable_window_32bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_disable_window_32bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_enable_window_64bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_disable_window_64bit(struct mv64x60_handle *bh, u32 window);
-static void gt64260_disable_all_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-static void gt64260a_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-static void gt64260b_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-
-static u32 mv64360_translate_size(u32 base, u32 size, u32 num_bits);
-static u32 mv64360_untranslate_size(u32 base, u32 size, u32 num_bits);
-static void mv64360_set_pci2mem_window(struct pci_controller *hose, u32 bus,
-	u32 window, u32 base);
-static void mv64360_set_pci2regs_window(struct mv64x60_handle *bh,
-	struct pci_controller *hose, u32 bus, u32 base);
-static u32 mv64360_is_enabled_32bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_enable_window_32bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_disable_window_32bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_enable_window_64bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_disable_window_64bit(struct mv64x60_handle *bh, u32 window);
-static void mv64360_disable_all_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-static void mv64360_config_io2mem_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2]);
-static void mv64360_set_mpsc2regs_window(struct mv64x60_handle *bh, u32 base);
-static void mv64360_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-static void mv64460_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si);
-
-
-/*
- * Define tables that have the chip-specific info for each type of
- * Marvell bridge chip.
- */
-static struct mv64x60_chip_info gt64260a_ci __initdata = { /* GT64260A */
-	.translate_size		= gt64260_translate_size,
-	.untranslate_size	= gt64260_untranslate_size,
-	.set_pci2mem_window	= gt64260_set_pci2mem_window,
-	.set_pci2regs_window	= gt64260_set_pci2regs_window,
-	.is_enabled_32bit	= gt64260_is_enabled_32bit,
-	.enable_window_32bit	= gt64260_enable_window_32bit,
-	.disable_window_32bit	= gt64260_disable_window_32bit,
-	.enable_window_64bit	= gt64260_enable_window_64bit,
-	.disable_window_64bit	= gt64260_disable_window_64bit,
-	.disable_all_windows	= gt64260_disable_all_windows,
-	.chip_specific_init	= gt64260a_chip_specific_init,
-	.window_tab_32bit	= gt64260_32bit_windows,
-	.window_tab_64bit	= gt64260_64bit_windows,
-};
-
-static struct mv64x60_chip_info gt64260b_ci __initdata = { /* GT64260B */
-	.translate_size		= gt64260_translate_size,
-	.untranslate_size	= gt64260_untranslate_size,
-	.set_pci2mem_window	= gt64260_set_pci2mem_window,
-	.set_pci2regs_window	= gt64260_set_pci2regs_window,
-	.is_enabled_32bit	= gt64260_is_enabled_32bit,
-	.enable_window_32bit	= gt64260_enable_window_32bit,
-	.disable_window_32bit	= gt64260_disable_window_32bit,
-	.enable_window_64bit	= gt64260_enable_window_64bit,
-	.disable_window_64bit	= gt64260_disable_window_64bit,
-	.disable_all_windows	= gt64260_disable_all_windows,
-	.chip_specific_init	= gt64260b_chip_specific_init,
-	.window_tab_32bit	= gt64260_32bit_windows,
-	.window_tab_64bit	= gt64260_64bit_windows,
-};
-
-static struct mv64x60_chip_info mv64360_ci __initdata = { /* MV64360 */
-	.translate_size		= mv64360_translate_size,
-	.untranslate_size	= mv64360_untranslate_size,
-	.set_pci2mem_window	= mv64360_set_pci2mem_window,
-	.set_pci2regs_window	= mv64360_set_pci2regs_window,
-	.is_enabled_32bit	= mv64360_is_enabled_32bit,
-	.enable_window_32bit	= mv64360_enable_window_32bit,
-	.disable_window_32bit	= mv64360_disable_window_32bit,
-	.enable_window_64bit	= mv64360_enable_window_64bit,
-	.disable_window_64bit	= mv64360_disable_window_64bit,
-	.disable_all_windows	= mv64360_disable_all_windows,
-	.config_io2mem_windows	= mv64360_config_io2mem_windows,
-	.set_mpsc2regs_window	= mv64360_set_mpsc2regs_window,
-	.chip_specific_init	= mv64360_chip_specific_init,
-	.window_tab_32bit	= mv64360_32bit_windows,
-	.window_tab_64bit	= mv64360_64bit_windows,
-};
-
-static struct mv64x60_chip_info mv64460_ci __initdata = { /* MV64460 */
-	.translate_size		= mv64360_translate_size,
-	.untranslate_size	= mv64360_untranslate_size,
-	.set_pci2mem_window	= mv64360_set_pci2mem_window,
-	.set_pci2regs_window	= mv64360_set_pci2regs_window,
-	.is_enabled_32bit	= mv64360_is_enabled_32bit,
-	.enable_window_32bit	= mv64360_enable_window_32bit,
-	.disable_window_32bit	= mv64360_disable_window_32bit,
-	.enable_window_64bit	= mv64360_enable_window_64bit,
-	.disable_window_64bit	= mv64360_disable_window_64bit,
-	.disable_all_windows	= mv64360_disable_all_windows,
-	.config_io2mem_windows	= mv64360_config_io2mem_windows,
-	.set_mpsc2regs_window	= mv64360_set_mpsc2regs_window,
-	.chip_specific_init	= mv64460_chip_specific_init,
-	.window_tab_32bit	= mv64360_32bit_windows,
-	.window_tab_64bit	= mv64360_64bit_windows,
-};
-
-/*
- *****************************************************************************
- *
- *	Platform Device Definitions
- *
- *****************************************************************************
- */
-#ifdef CONFIG_SERIAL_MPSC
-static struct mpsc_shared_pdata mv64x60_mpsc_shared_pdata = {
-	.mrr_val		= 0x3ffffe38,
-	.rcrr_val		= 0,
-	.tcrr_val		= 0,
-	.intr_cause_val		= 0,
-	.intr_mask_val		= 0,
-};
-
-static struct resource mv64x60_mpsc_shared_resources[] = {
-	/* Do not change the order of the IORESOURCE_MEM resources */
-	[0] = {
-		.name	= "mpsc routing base",
-		.start	= MV64x60_MPSC_ROUTING_OFFSET,
-		.end	= MV64x60_MPSC_ROUTING_OFFSET +
-			MPSC_ROUTING_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "sdma intr base",
-		.start	= MV64x60_SDMA_INTR_OFFSET,
-		.end	= MV64x60_SDMA_INTR_OFFSET +
-			MPSC_SDMA_INTR_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device mpsc_shared_device = { /* Shared device */
-	.name		= MPSC_SHARED_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_mpsc_shared_resources),
-	.resource	= mv64x60_mpsc_shared_resources,
-	.dev = {
-		.platform_data = &mv64x60_mpsc_shared_pdata,
-	},
-};
-
-static struct mpsc_pdata mv64x60_mpsc0_pdata = {
-	.mirror_regs		= 0,
-	.cache_mgmt		= 0,
-	.max_idle		= 0,
-	.default_baud		= 9600,
-	.default_bits		= 8,
-	.default_parity		= 'n',
-	.default_flow		= 'n',
-	.chr_1_val		= 0x00000000,
-	.chr_2_val		= 0x00000000,
-	.chr_10_val		= 0x00000003,
-	.mpcr_val		= 0,
-	.bcr_val		= 0,
-	.brg_can_tune		= 0,
-	.brg_clk_src		= 8,		/* Default to TCLK */
-	.brg_clk_freq		= 100000000,	/* Default to 100 MHz */
-};
-
-static struct resource mv64x60_mpsc0_resources[] = {
-	/* Do not change the order of the IORESOURCE_MEM resources */
-	[0] = {
-		.name	= "mpsc 0 base",
-		.start	= MV64x60_MPSC_0_OFFSET,
-		.end	= MV64x60_MPSC_0_OFFSET + MPSC_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "sdma 0 base",
-		.start	= MV64x60_SDMA_0_OFFSET,
-		.end	= MV64x60_SDMA_0_OFFSET + MPSC_SDMA_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.name	= "brg 0 base",
-		.start	= MV64x60_BRG_0_OFFSET,
-		.end	= MV64x60_BRG_0_OFFSET + MPSC_BRG_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = {
-		.name	= "sdma 0 irq",
-		.start	= MV64x60_IRQ_SDMA_0,
-		.end	= MV64x60_IRQ_SDMA_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mpsc0_device = {
-	.name		= MPSC_CTLR_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_mpsc0_resources),
-	.resource	= mv64x60_mpsc0_resources,
-	.dev = {
-		.platform_data = &mv64x60_mpsc0_pdata,
-	},
-};
-
-static struct mpsc_pdata mv64x60_mpsc1_pdata = {
-	.mirror_regs		= 0,
-	.cache_mgmt		= 0,
-	.max_idle		= 0,
-	.default_baud		= 9600,
-	.default_bits		= 8,
-	.default_parity		= 'n',
-	.default_flow		= 'n',
-	.chr_1_val		= 0x00000000,
-	.chr_1_val		= 0x00000000,
-	.chr_2_val		= 0x00000000,
-	.chr_10_val		= 0x00000003,
-	.mpcr_val		= 0,
-	.bcr_val		= 0,
-	.brg_can_tune		= 0,
-	.brg_clk_src		= 8,		/* Default to TCLK */
-	.brg_clk_freq		= 100000000,	/* Default to 100 MHz */
-};
-
-static struct resource mv64x60_mpsc1_resources[] = {
-	/* Do not change the order of the IORESOURCE_MEM resources */
-	[0] = {
-		.name	= "mpsc 1 base",
-		.start	= MV64x60_MPSC_1_OFFSET,
-		.end	= MV64x60_MPSC_1_OFFSET + MPSC_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "sdma 1 base",
-		.start	= MV64x60_SDMA_1_OFFSET,
-		.end	= MV64x60_SDMA_1_OFFSET + MPSC_SDMA_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.name	= "brg 1 base",
-		.start	= MV64x60_BRG_1_OFFSET,
-		.end	= MV64x60_BRG_1_OFFSET + MPSC_BRG_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[3] = {
-		.name	= "sdma 1 irq",
-		.start	= MV64360_IRQ_SDMA_1,
-		.end	= MV64360_IRQ_SDMA_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device mpsc1_device = {
-	.name		= MPSC_CTLR_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(mv64x60_mpsc1_resources),
-	.resource	= mv64x60_mpsc1_resources,
-	.dev = {
-		.platform_data = &mv64x60_mpsc1_pdata,
-	},
-};
-#endif
-
-#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
-static struct resource mv64x60_eth_shared_resources[] = {
-	[0] = {
-		.name	= "ethernet shared base",
-		.start	= MV643XX_ETH_SHARED_REGS,
-		.end	= MV643XX_ETH_SHARED_REGS +
-					MV643XX_ETH_SHARED_REGS_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device mv64x60_eth_shared_device = {
-	.name		= MV643XX_ETH_SHARED_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth_shared_resources),
-	.resource	= mv64x60_eth_shared_resources,
-};
-
-#ifdef CONFIG_MV643XX_ETH_0
-static struct resource mv64x60_eth0_resources[] = {
-	[0] = {
-		.name	= "eth0 irq",
-		.start	= MV64x60_IRQ_ETH_0,
-		.end	= MV64x60_IRQ_ETH_0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth0_pd = {
-	.shared		= &mv64x60_eth_shared_device;
-	.port_number	= 0,
-};
-
-static struct platform_device eth0_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth0_resources),
-	.resource	= mv64x60_eth0_resources,
-	.dev = {
-		.platform_data = &eth0_pd,
-	},
-};
-#endif
-
-#ifdef CONFIG_MV643XX_ETH_1
-static struct resource mv64x60_eth1_resources[] = {
-	[0] = {
-		.name	= "eth1 irq",
-		.start	= MV64x60_IRQ_ETH_1,
-		.end	= MV64x60_IRQ_ETH_1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth1_pd = {
-	.shared		= &mv64x60_eth_shared_device;
-	.port_number	= 1,
-};
-
-static struct platform_device eth1_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth1_resources),
-	.resource	= mv64x60_eth1_resources,
-	.dev = {
-		.platform_data = &eth1_pd,
-	},
-};
-#endif
-
-#ifdef CONFIG_MV643XX_ETH_2
-static struct resource mv64x60_eth2_resources[] = {
-	[0] = {
-		.name	= "eth2 irq",
-		.start	= MV64x60_IRQ_ETH_2,
-		.end	= MV64x60_IRQ_ETH_2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct mv643xx_eth_platform_data eth2_pd = {
-	.shared		= &mv64x60_eth_shared_device;
-	.port_number	= 2,
-};
-
-static struct platform_device eth2_device = {
-	.name		= MV643XX_ETH_NAME,
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(mv64x60_eth2_resources),
-	.resource	= mv64x60_eth2_resources,
-	.dev = {
-		.platform_data = &eth2_pd,
-	},
-};
-#endif
-#endif
-
-#ifdef	CONFIG_I2C_MV64XXX
-static struct mv64xxx_i2c_pdata mv64xxx_i2c_pdata = {
-	.freq_m			= 8,
-	.freq_n			= 3,
-	.timeout		= 1000, /* Default timeout of 1 second */
-};
-
-static struct resource mv64xxx_i2c_resources[] = {
-	/* Do not change the order of the IORESOURCE_MEM resources */
-	[0] = {
-		.name	= "mv64xxx i2c base",
-		.start	= MV64XXX_I2C_OFFSET,
-		.end	= MV64XXX_I2C_OFFSET + MV64XXX_I2C_REG_BLOCK_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "mv64xxx i2c irq",
-		.start	= MV64x60_IRQ_I2C,
-		.end	= MV64x60_IRQ_I2C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_device = {
-	.name		= MV64XXX_I2C_CTLR_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64xxx_i2c_resources),
-	.resource	= mv64xxx_i2c_resources,
-	.dev = {
-		.platform_data = &mv64xxx_i2c_pdata,
-	},
-};
-#endif
-
-#ifdef CONFIG_WATCHDOG
-static struct mv64x60_wdt_pdata mv64x60_wdt_pdata = {
-	.timeout		= 10,  /* default watchdog expiry in seconds */
-	.bus_clk		= 133, /* default bus clock in MHz */
-};
-
-static struct resource mv64x60_wdt_resources[] = {
-	[0] = {
-		.name	= "mv64x60 wdt base",
-		.start	= MV64x60_WDT_WDC,
-		.end	= MV64x60_WDT_WDC + 8 - 1, /* two 32-bit registers */
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device wdt_device = {
-	.name		= MV64x60_WDT_NAME,
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(mv64x60_wdt_resources),
-	.resource	= mv64x60_wdt_resources,
-	.dev = {
-		.platform_data = &mv64x60_wdt_pdata,
-	},
-};
-#endif
-
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-static struct mv64xxx_pdata mv64xxx_pdata = {
-	.hs_reg_valid	= 0,
-};
-
-static struct platform_device mv64xxx_device = { /* general mv64x60 stuff */
-	.name	= MV64XXX_DEV_NAME,
-	.id	= 0,
-	.dev = {
-		.platform_data = &mv64xxx_pdata,
-	},
-};
-#endif
-
-static struct platform_device *mv64x60_pd_devs[] __initdata = {
-#ifdef CONFIG_SERIAL_MPSC
-	&mpsc_shared_device,
-	&mpsc0_device,
-	&mpsc1_device,
-#endif
-#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
-	&mv64x60_eth_shared_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_0
-	&eth0_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_1
-	&eth1_device,
-#endif
-#ifdef CONFIG_MV643XX_ETH_2
-	&eth2_device,
-#endif
-#ifdef	CONFIG_I2C_MV64XXX
-	&i2c_device,
-#endif
-#ifdef	CONFIG_MV64X60_WDT
-	&wdt_device,
-#endif
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-	&mv64xxx_device,
-#endif
-};
-
-/*
- *****************************************************************************
- *
- *	Bridge Initialization Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_init()
- *
- * Initialize the bridge based on setting passed in via 'si'.  The bridge
- * handle, 'bh', will be set so that it can be used to make subsequent
- * calls to routines in this file.
- */
-int __init
-mv64x60_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si)
-{
-	u32	mem_windows[MV64x60_CPU2MEM_WINDOWS][2];
-
-	if (ppc_md.progress)
-		ppc_md.progress("mv64x60 initialization", 0x0);
-
-	spin_lock_init(&mv64x60_lock);
-	mv64x60_early_init(bh, si);
-
-	if (mv64x60_get_type(bh) || mv64x60_setup_for_chip(bh)) {
-		iounmap(bh->v_base);
-		bh->v_base = 0;
-		if (ppc_md.progress)
-			ppc_md.progress("mv64x60_init: Can't determine chip",0);
-		return -1;
-	}
-
-	bh->ci->disable_all_windows(bh, si);
-	mv64x60_get_mem_windows(bh, mem_windows);
-	mv64x60_config_cpu2mem_windows(bh, si, mem_windows);
-
-	if (bh->ci->config_io2mem_windows)
-		bh->ci->config_io2mem_windows(bh, si, mem_windows);
-	if (bh->ci->set_mpsc2regs_window)
-		bh->ci->set_mpsc2regs_window(bh, si->phys_reg_base);
-
-	if (si->pci_1.enable_bus) {
-		bh->io_base_b = (u32)ioremap(si->pci_1.pci_io.cpu_base,
-			si->pci_1.pci_io.size);
-		isa_io_base = bh->io_base_b;
-	}
-
-	if (si->pci_0.enable_bus) {
-		bh->io_base_a = (u32)ioremap(si->pci_0.pci_io.cpu_base,
-			si->pci_0.pci_io.size);
-		isa_io_base = bh->io_base_a;
-
-		mv64x60_alloc_hose(bh, MV64x60_PCI0_CONFIG_ADDR,
-			MV64x60_PCI0_CONFIG_DATA, &bh->hose_a);
-		mv64x60_config_resources(bh->hose_a, &si->pci_0, bh->io_base_a);
-		mv64x60_config_pci_params(bh->hose_a, &si->pci_0);
-
-		mv64x60_config_cpu2pci_windows(bh, &si->pci_0, 0);
-		mv64x60_config_pci2mem_windows(bh, bh->hose_a, &si->pci_0, 0,
-			mem_windows);
-		bh->ci->set_pci2regs_window(bh, bh->hose_a, 0,
-			si->phys_reg_base);
-	}
-
-	if (si->pci_1.enable_bus) {
-		mv64x60_alloc_hose(bh, MV64x60_PCI1_CONFIG_ADDR,
-			MV64x60_PCI1_CONFIG_DATA, &bh->hose_b);
-		mv64x60_config_resources(bh->hose_b, &si->pci_1, bh->io_base_b);
-		mv64x60_config_pci_params(bh->hose_b, &si->pci_1);
-
-		mv64x60_config_cpu2pci_windows(bh, &si->pci_1, 1);
-		mv64x60_config_pci2mem_windows(bh, bh->hose_b, &si->pci_1, 1,
-			mem_windows);
-		bh->ci->set_pci2regs_window(bh, bh->hose_b, 1,
-			si->phys_reg_base);
-	}
-
-	bh->ci->chip_specific_init(bh, si);
-	mv64x60_pd_fixup(bh, mv64x60_pd_devs, ARRAY_SIZE(mv64x60_pd_devs));
-
-	return 0;
-}
-
-/*
- * mv64x60_early_init()
- *
- * Do some bridge work that must take place before we start messing with
- * the bridge for real.
- */
-void __init
-mv64x60_early_init(struct mv64x60_handle *bh, struct mv64x60_setup_info *si)
-{
-	struct pci_controller	hose_a, hose_b;
-
-	memset(bh, 0, sizeof(*bh));
-
-	bh->p_base = si->phys_reg_base;
-	bh->v_base = ioremap(bh->p_base, MV64x60_INTERNAL_SPACE_SIZE);
-
-	mv64x60_bridge_pbase = bh->p_base;
-	mv64x60_bridge_vbase = bh->v_base;
-
-	/* Assuming pci mode [reserved] bits 4:5 on 64260 are 0 */
-	bh->pci_mode_a = mv64x60_read(bh, MV64x60_PCI0_MODE) &
-		MV64x60_PCIMODE_MASK;
-	bh->pci_mode_b = mv64x60_read(bh, MV64x60_PCI1_MODE) &
-		MV64x60_PCIMODE_MASK;
-
-	/* Need temporary hose structs to call mv64x60_set_bus() */
-	memset(&hose_a, 0, sizeof(hose_a));
-	memset(&hose_b, 0, sizeof(hose_b));
-	setup_indirect_pci_nomap(&hose_a, bh->v_base + MV64x60_PCI0_CONFIG_ADDR,
-		bh->v_base + MV64x60_PCI0_CONFIG_DATA);
-	setup_indirect_pci_nomap(&hose_b, bh->v_base + MV64x60_PCI1_CONFIG_ADDR,
-		bh->v_base + MV64x60_PCI1_CONFIG_DATA);
-	bh->hose_a = &hose_a;
-	bh->hose_b = &hose_b;
-
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-	/* Save a copy of hose_a for sysfs functions -- hack */
-	memcpy(&sysfs_hose_a, &hose_a, sizeof(hose_a));
-#endif
-
-	mv64x60_set_bus(bh, 0, 0);
-	mv64x60_set_bus(bh, 1, 0);
-
-	bh->hose_a = NULL;
-	bh->hose_b = NULL;
-
-	/* Clear bit 0 of PCI addr decode control so PCI->CPU remap 1:1 */
-	mv64x60_clr_bits(bh, MV64x60_PCI0_PCI_DECODE_CNTL, 0x00000001);
-	mv64x60_clr_bits(bh, MV64x60_PCI1_PCI_DECODE_CNTL, 0x00000001);
-
-	/* Bit 12 MUST be 0; set bit 27--don't auto-update cpu remap regs */
-	mv64x60_clr_bits(bh, MV64x60_CPU_CONFIG, (1<<12));
-	mv64x60_set_bits(bh, MV64x60_CPU_CONFIG, (1<<27));
-
-	mv64x60_set_bits(bh, MV64x60_PCI0_TO_RETRY, 0xffff);
-	mv64x60_set_bits(bh, MV64x60_PCI1_TO_RETRY, 0xffff);
-}
-
-/*
- *****************************************************************************
- *
- *	Window Config Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_get_32bit_window()
- *
- * Determine the base address and size of a 32-bit window on the bridge.
- */
-void __init
-mv64x60_get_32bit_window(struct mv64x60_handle *bh, u32 window,
-	u32 *base, u32 *size)
-{
-	u32	val, base_reg, size_reg, base_bits, size_bits;
-	u32	(*get_from_field)(u32 val, u32 num_bits);
-
-	base_reg = bh->ci->window_tab_32bit[window].base_reg;
-
-	if (base_reg != 0) {
-		size_reg  = bh->ci->window_tab_32bit[window].size_reg;
-		base_bits = bh->ci->window_tab_32bit[window].base_bits;
-		size_bits = bh->ci->window_tab_32bit[window].size_bits;
-		get_from_field= bh->ci->window_tab_32bit[window].get_from_field;
-
-		val = mv64x60_read(bh, base_reg);
-		*base = get_from_field(val, base_bits);
-
-		if (size_reg != 0) {
-			val = mv64x60_read(bh, size_reg);
-			val = get_from_field(val, size_bits);
-			*size = bh->ci->untranslate_size(*base, val, size_bits);
-		} else
-			*size = 0;
-	} else {
-		*base = 0;
-		*size = 0;
-	}
-
-	pr_debug("get 32bit window: %d, base: 0x%x, size: 0x%x\n",
-		window, *base, *size);
-}
-
-/*
- * mv64x60_set_32bit_window()
- *
- * Set the base address and size of a 32-bit window on the bridge.
- */
-void __init
-mv64x60_set_32bit_window(struct mv64x60_handle *bh, u32 window,
-	u32 base, u32 size, u32 other_bits)
-{
-	u32	val, base_reg, size_reg, base_bits, size_bits;
-	u32	(*map_to_field)(u32 val, u32 num_bits);
-
-	pr_debug("set 32bit window: %d, base: 0x%x, size: 0x%x, other: 0x%x\n",
-		window, base, size, other_bits);
-
-	base_reg = bh->ci->window_tab_32bit[window].base_reg;
-
-	if (base_reg != 0) {
-		size_reg  = bh->ci->window_tab_32bit[window].size_reg;
-		base_bits = bh->ci->window_tab_32bit[window].base_bits;
-		size_bits = bh->ci->window_tab_32bit[window].size_bits;
-		map_to_field = bh->ci->window_tab_32bit[window].map_to_field;
-
-		val = map_to_field(base, base_bits) | other_bits;
-		mv64x60_write(bh, base_reg, val);
-
-		if (size_reg != 0) {
-			val = bh->ci->translate_size(base, size, size_bits);
-			val = map_to_field(val, size_bits);
-			mv64x60_write(bh, size_reg, val);
-		}
-
-		(void)mv64x60_read(bh, base_reg); /* Flush FIFO */
-	}
-}
-
-/*
- * mv64x60_get_64bit_window()
- *
- * Determine the base address and size of a 64-bit window on the bridge.
- */
-void __init
-mv64x60_get_64bit_window(struct mv64x60_handle *bh, u32 window,
-	u32 *base_hi, u32 *base_lo, u32 *size)
-{
-	u32	val, base_lo_reg, size_reg, base_lo_bits, size_bits;
-	u32	(*get_from_field)(u32 val, u32 num_bits);
-
-	base_lo_reg = bh->ci->window_tab_64bit[window].base_lo_reg;
-
-	if (base_lo_reg != 0) {
-		size_reg = bh->ci->window_tab_64bit[window].size_reg;
-		base_lo_bits = bh->ci->window_tab_64bit[window].base_lo_bits;
-		size_bits = bh->ci->window_tab_64bit[window].size_bits;
-		get_from_field= bh->ci->window_tab_64bit[window].get_from_field;
-
-		*base_hi = mv64x60_read(bh,
-			bh->ci->window_tab_64bit[window].base_hi_reg);
-
-		val = mv64x60_read(bh, base_lo_reg);
-		*base_lo = get_from_field(val, base_lo_bits);
-
-		if (size_reg != 0) {
-			val = mv64x60_read(bh, size_reg);
-			val = get_from_field(val, size_bits);
-			*size = bh->ci->untranslate_size(*base_lo, val,
-								size_bits);
-		} else
-			*size = 0;
-	} else {
-		*base_hi = 0;
-		*base_lo = 0;
-		*size = 0;
-	}
-
-	pr_debug("get 64bit window: %d, base hi: 0x%x, base lo: 0x%x, "
-		"size: 0x%x\n", window, *base_hi, *base_lo, *size);
-}
-
-/*
- * mv64x60_set_64bit_window()
- *
- * Set the base address and size of a 64-bit window on the bridge.
- */
-void __init
-mv64x60_set_64bit_window(struct mv64x60_handle *bh, u32 window,
-	u32 base_hi, u32 base_lo, u32 size, u32 other_bits)
-{
-	u32	val, base_lo_reg, size_reg, base_lo_bits, size_bits;
-	u32	(*map_to_field)(u32 val, u32 num_bits);
-
-	pr_debug("set 64bit window: %d, base hi: 0x%x, base lo: 0x%x, "
-		"size: 0x%x, other: 0x%x\n",
-		window, base_hi, base_lo, size, other_bits);
-
-	base_lo_reg = bh->ci->window_tab_64bit[window].base_lo_reg;
-
-	if (base_lo_reg != 0) {
-		size_reg = bh->ci->window_tab_64bit[window].size_reg;
-		base_lo_bits = bh->ci->window_tab_64bit[window].base_lo_bits;
-		size_bits = bh->ci->window_tab_64bit[window].size_bits;
-		map_to_field = bh->ci->window_tab_64bit[window].map_to_field;
-
-		mv64x60_write(bh, bh->ci->window_tab_64bit[window].base_hi_reg,
-			base_hi);
-
-		val = map_to_field(base_lo, base_lo_bits) | other_bits;
-		mv64x60_write(bh, base_lo_reg, val);
-
-		if (size_reg != 0) {
-			val = bh->ci->translate_size(base_lo, size, size_bits);
-			val = map_to_field(val, size_bits);
-			mv64x60_write(bh, size_reg, val);
-		}
-
-		(void)mv64x60_read(bh, base_lo_reg); /* Flush FIFO */
-	}
-}
-
-/*
- * mv64x60_mask()
- *
- * Take the high-order 'num_bits' of 'val' & mask off low bits.
- */
-u32 __init
-mv64x60_mask(u32 val, u32 num_bits)
-{
-	return val & (0xffffffff << (32 - num_bits));
-}
-
-/*
- * mv64x60_shift_left()
- *
- * Take the low-order 'num_bits' of 'val', shift left to align at bit 31 (MSB).
- */
-u32 __init
-mv64x60_shift_left(u32 val, u32 num_bits)
-{
-	return val << (32 - num_bits);
-}
-
-/*
- * mv64x60_shift_right()
- *
- * Take the high-order 'num_bits' of 'val', shift right to align at bit 0 (LSB).
- */
-u32 __init
-mv64x60_shift_right(u32 val, u32 num_bits)
-{
-	return val >> (32 - num_bits);
-}
-
-/*
- *****************************************************************************
- *
- *	Chip Identification Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_get_type()
- *
- * Determine the type of bridge chip we have.
- */
-int __init
-mv64x60_get_type(struct mv64x60_handle *bh)
-{
-	struct pci_controller hose;
-	u16	val;
-	u8	save_exclude;
-
-	memset(&hose, 0, sizeof(hose));
-	setup_indirect_pci_nomap(&hose, bh->v_base + MV64x60_PCI0_CONFIG_ADDR,
-		bh->v_base + MV64x60_PCI0_CONFIG_DATA);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	/* Sanity check of bridge's Vendor ID */
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_VENDOR_ID, &val);
-
-	if (val != PCI_VENDOR_ID_MARVELL) {
-		mv64x60_pci_exclude_bridge = save_exclude;
-		return -1;
-	}
-
-	/* Get the revision of the chip */
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_CLASS_REVISION,
-		&val);
-	bh->rev = (u32)(val & 0xff);
-
-	/* Figure out the type of Marvell bridge it is */
-	early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_DEVICE_ID, &val);
-	mv64x60_pci_exclude_bridge = save_exclude;
-
-	switch (val) {
-	case PCI_DEVICE_ID_MARVELL_GT64260:
-		switch (bh->rev) {
-		case GT64260_REV_A:
-			bh->type = MV64x60_TYPE_GT64260A;
-			break;
-
-		default:
-			printk(KERN_WARNING "Unsupported GT64260 rev %04x\n",
-				bh->rev);
-			/* Assume its similar to a 'B' rev and fallthru */
-		case GT64260_REV_B:
-			bh->type = MV64x60_TYPE_GT64260B;
-			break;
-		}
-		break;
-
-	case PCI_DEVICE_ID_MARVELL_MV64360:
-		/* Marvell won't tell me how to distinguish a 64361 & 64362 */
-		bh->type = MV64x60_TYPE_MV64360;
-		break;
-
-	case PCI_DEVICE_ID_MARVELL_MV64460:
-		bh->type = MV64x60_TYPE_MV64460;
-		break;
-
-	default:
-		printk(KERN_ERR "Unknown Marvell bridge type %04x\n", val);
-		return -1;
-	}
-
-	/* Hang onto bridge type & rev for PIC code */
-	mv64x60_bridge_type = bh->type;
-	mv64x60_bridge_rev = bh->rev;
-
-	return 0;
-}
-
-/*
- * mv64x60_setup_for_chip()
- *
- * Set 'bh' to use the proper set of routine for the bridge chip that we have.
- */
-int __init
-mv64x60_setup_for_chip(struct mv64x60_handle *bh)
-{
-	int	rc = 0;
-
-	/* Set up chip-specific info based on the chip/bridge type */
-	switch(bh->type) {
-	case MV64x60_TYPE_GT64260A:
-		bh->ci = &gt64260a_ci;
-		break;
-
-	case MV64x60_TYPE_GT64260B:
-		bh->ci = &gt64260b_ci;
-		break;
-
-	case MV64x60_TYPE_MV64360:
-		bh->ci = &mv64360_ci;
-		break;
-
-	case MV64x60_TYPE_MV64460:
-		bh->ci = &mv64460_ci;
-		break;
-
-	case MV64x60_TYPE_INVALID:
-	default:
-		if (ppc_md.progress)
-			ppc_md.progress("mv64x60: Unsupported bridge", 0x0);
-		printk(KERN_ERR "mv64x60: Unsupported bridge\n");
-		rc = -1;
-	}
-
-	return rc;
-}
-
-/*
- * mv64x60_get_bridge_vbase()
- *
- * Return the virtual address of the bridge's registers.
- */
-void __iomem *
-mv64x60_get_bridge_vbase(void)
-{
-	return mv64x60_bridge_vbase;
-}
-
-/*
- * mv64x60_get_bridge_type()
- *
- * Return the type of bridge on the platform.
- */
-u32
-mv64x60_get_bridge_type(void)
-{
-	return mv64x60_bridge_type;
-}
-
-/*
- * mv64x60_get_bridge_rev()
- *
- * Return the revision of the bridge on the platform.
- */
-u32
-mv64x60_get_bridge_rev(void)
-{
-	return mv64x60_bridge_rev;
-}
-
-/*
- *****************************************************************************
- *
- *	System Memory Window Related Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_get_mem_size()
- *
- * Calculate the amount of memory that the memory controller is set up for.
- * This should only be used by board-specific code if there is no other
- * way to determine the amount of memory in the system.
- */
-u32 __init
-mv64x60_get_mem_size(u32 bridge_base, u32 chip_type)
-{
-	struct mv64x60_handle	bh;
-	u32	mem_windows[MV64x60_CPU2MEM_WINDOWS][2];
-	u32	rc = 0;
-
-	memset(&bh, 0, sizeof(bh));
-
-	bh.type = chip_type;
-	bh.v_base = (void *)bridge_base;
-
-	if (!mv64x60_setup_for_chip(&bh)) {
-		mv64x60_get_mem_windows(&bh, mem_windows);
-		rc = mv64x60_calc_mem_size(&bh, mem_windows);
-	}
-
-	return rc;
-}
-
-/*
- * mv64x60_get_mem_windows()
- *
- * Get the values in the memory controller & return in the 'mem_windows' array.
- */
-void __init
-mv64x60_get_mem_windows(struct mv64x60_handle *bh,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, win;
-
-	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
-		if (bh->ci->is_enabled_32bit(bh, win))
-			mv64x60_get_32bit_window(bh, win,
-				&mem_windows[i][0], &mem_windows[i][1]);
-		else {
-			mem_windows[i][0] = 0;
-			mem_windows[i][1] = 0;
-		}
-}
-
-/*
- * mv64x60_calc_mem_size()
- *
- * Using the memory controller register values in 'mem_windows', determine
- * how much memory it is set up for.
- */
-u32 __init
-mv64x60_calc_mem_size(struct mv64x60_handle *bh,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, total = 0;
-
-	for (i=0; i<MV64x60_CPU2MEM_WINDOWS; i++)
-		total += mem_windows[i][1];
-
-	return total;
-}
-
-/*
- *****************************************************************************
- *
- *	CPU->System MEM, PCI Config Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_config_cpu2mem_windows()
- *
- * Configure CPU->Memory windows on the bridge.
- */
-static u32 prot_tab[] __initdata = {
-	MV64x60_CPU_PROT_0_WIN, MV64x60_CPU_PROT_1_WIN,
-	MV64x60_CPU_PROT_2_WIN, MV64x60_CPU_PROT_3_WIN
-};
-
-static u32 cpu_snoop_tab[] __initdata = {
-	MV64x60_CPU_SNOOP_0_WIN, MV64x60_CPU_SNOOP_1_WIN,
-	MV64x60_CPU_SNOOP_2_WIN, MV64x60_CPU_SNOOP_3_WIN
-};
-
-void __init
-mv64x60_config_cpu2mem_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, win;
-
-	/* Set CPU protection & snoop windows */
-	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
-		if (bh->ci->is_enabled_32bit(bh, win)) {
-			mv64x60_set_32bit_window(bh, prot_tab[i],
-				mem_windows[i][0], mem_windows[i][1],
-				si->cpu_prot_options[i]);
-			bh->ci->enable_window_32bit(bh, prot_tab[i]);
-
-			if (bh->ci->window_tab_32bit[cpu_snoop_tab[i]].
-								base_reg != 0) {
-				mv64x60_set_32bit_window(bh, cpu_snoop_tab[i],
-					mem_windows[i][0], mem_windows[i][1],
-					si->cpu_snoop_options[i]);
-				bh->ci->enable_window_32bit(bh,
-					cpu_snoop_tab[i]);
-			}
-
-		}
-}
-
-/*
- * mv64x60_config_cpu2pci_windows()
- *
- * Configure the CPU->PCI windows for one of the PCI buses.
- */
-static u32 win_tab[2][4] __initdata = {
-	{ MV64x60_CPU2PCI0_IO_WIN, MV64x60_CPU2PCI0_MEM_0_WIN,
-	  MV64x60_CPU2PCI0_MEM_1_WIN, MV64x60_CPU2PCI0_MEM_2_WIN },
-	{ MV64x60_CPU2PCI1_IO_WIN, MV64x60_CPU2PCI1_MEM_0_WIN,
-	  MV64x60_CPU2PCI1_MEM_1_WIN, MV64x60_CPU2PCI1_MEM_2_WIN },
-};
-
-static u32 remap_tab[2][4] __initdata = {
-	{ MV64x60_CPU2PCI0_IO_REMAP_WIN, MV64x60_CPU2PCI0_MEM_0_REMAP_WIN,
-	  MV64x60_CPU2PCI0_MEM_1_REMAP_WIN, MV64x60_CPU2PCI0_MEM_2_REMAP_WIN },
-	{ MV64x60_CPU2PCI1_IO_REMAP_WIN, MV64x60_CPU2PCI1_MEM_0_REMAP_WIN,
-	  MV64x60_CPU2PCI1_MEM_1_REMAP_WIN, MV64x60_CPU2PCI1_MEM_2_REMAP_WIN }
-};
-
-void __init
-mv64x60_config_cpu2pci_windows(struct mv64x60_handle *bh,
-	struct mv64x60_pci_info *pi, u32 bus)
-{
-	int	i;
-
-	if (pi->pci_io.size > 0) {
-		mv64x60_set_32bit_window(bh, win_tab[bus][0],
-			pi->pci_io.cpu_base, pi->pci_io.size, pi->pci_io.swap);
-		mv64x60_set_32bit_window(bh, remap_tab[bus][0],
-			pi->pci_io.pci_base_lo, 0, 0);
-		bh->ci->enable_window_32bit(bh, win_tab[bus][0]);
-	} else /* Actually, the window should already be disabled */
-		bh->ci->disable_window_32bit(bh, win_tab[bus][0]);
-
-	for (i=0; i<3; i++)
-		if (pi->pci_mem[i].size > 0) {
-			mv64x60_set_32bit_window(bh, win_tab[bus][i+1],
-				pi->pci_mem[i].cpu_base, pi->pci_mem[i].size,
-				pi->pci_mem[i].swap);
-			mv64x60_set_64bit_window(bh, remap_tab[bus][i+1],
-				pi->pci_mem[i].pci_base_hi,
-				pi->pci_mem[i].pci_base_lo, 0, 0);
-			bh->ci->enable_window_32bit(bh, win_tab[bus][i+1]);
-		} else /* Actually, the window should already be disabled */
-			bh->ci->disable_window_32bit(bh, win_tab[bus][i+1]);
-}
-
-/*
- *****************************************************************************
- *
- *	PCI->System MEM Config Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_config_pci2mem_windows()
- *
- * Configure the PCI->Memory windows on the bridge.
- */
-static u32 pci_acc_tab[2][4] __initdata = {
-	{ MV64x60_PCI02MEM_ACC_CNTL_0_WIN, MV64x60_PCI02MEM_ACC_CNTL_1_WIN,
-	  MV64x60_PCI02MEM_ACC_CNTL_2_WIN, MV64x60_PCI02MEM_ACC_CNTL_3_WIN },
-	{ MV64x60_PCI12MEM_ACC_CNTL_0_WIN, MV64x60_PCI12MEM_ACC_CNTL_1_WIN,
-	  MV64x60_PCI12MEM_ACC_CNTL_2_WIN, MV64x60_PCI12MEM_ACC_CNTL_3_WIN }
-};
-
-static u32 pci_snoop_tab[2][4] __initdata = {
-	{ MV64x60_PCI02MEM_SNOOP_0_WIN, MV64x60_PCI02MEM_SNOOP_1_WIN,
-	  MV64x60_PCI02MEM_SNOOP_2_WIN, MV64x60_PCI02MEM_SNOOP_3_WIN },
-	{ MV64x60_PCI12MEM_SNOOP_0_WIN, MV64x60_PCI12MEM_SNOOP_1_WIN,
-	  MV64x60_PCI12MEM_SNOOP_2_WIN, MV64x60_PCI12MEM_SNOOP_3_WIN }
-};
-
-static u32 pci_size_tab[2][4] __initdata = {
-	{ MV64x60_PCI0_MEM_0_SIZE, MV64x60_PCI0_MEM_1_SIZE,
-	  MV64x60_PCI0_MEM_2_SIZE, MV64x60_PCI0_MEM_3_SIZE },
-	{ MV64x60_PCI1_MEM_0_SIZE, MV64x60_PCI1_MEM_1_SIZE,
-	  MV64x60_PCI1_MEM_2_SIZE, MV64x60_PCI1_MEM_3_SIZE }
-};
-
-void __init
-mv64x60_config_pci2mem_windows(struct mv64x60_handle *bh,
-	struct pci_controller *hose, struct mv64x60_pci_info *pi,
-	u32 bus, u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, win;
-
-	/*
-	 * Set the access control, snoop, BAR size, and window base addresses.
-	 * PCI->MEM windows base addresses will match exactly what the
-	 * CPU->MEM windows are.
-	 */
-	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
-		if (bh->ci->is_enabled_32bit(bh, win)) {
-			mv64x60_set_64bit_window(bh,
-				pci_acc_tab[bus][i], 0,
-				mem_windows[i][0], mem_windows[i][1],
-				pi->acc_cntl_options[i]);
-			bh->ci->enable_window_64bit(bh, pci_acc_tab[bus][i]);
-
-			if (bh->ci->window_tab_64bit[
-				pci_snoop_tab[bus][i]].base_lo_reg != 0) {
-
-				mv64x60_set_64bit_window(bh,
-					pci_snoop_tab[bus][i], 0,
-					mem_windows[i][0], mem_windows[i][1],
-					pi->snoop_options[i]);
-				bh->ci->enable_window_64bit(bh,
-					pci_snoop_tab[bus][i]);
-			}
-
-			bh->ci->set_pci2mem_window(hose, bus, i,
-				mem_windows[i][0]);
-			mv64x60_write(bh, pci_size_tab[bus][i],
-				mv64x60_mask(mem_windows[i][1] - 1, 20));
-
-			/* Enable the window */
-			mv64x60_clr_bits(bh, ((bus == 0) ?
-				MV64x60_PCI0_BAR_ENABLE :
-				MV64x60_PCI1_BAR_ENABLE), (1 << i));
-		}
-}
-
-/*
- *****************************************************************************
- *
- *	Hose & Resource Alloc/Init Routines
- *
- *****************************************************************************
- */
-/*
- * mv64x60_alloc_hoses()
- *
- * Allocate the PCI hose structures for the bridge's PCI buses.
- */
-void __init
-mv64x60_alloc_hose(struct mv64x60_handle *bh, u32 cfg_addr, u32 cfg_data,
-	struct pci_controller **hose)
-{
-	*hose = pcibios_alloc_controller();
-	setup_indirect_pci_nomap(*hose, bh->v_base + cfg_addr,
-		bh->v_base + cfg_data);
-}
-
-/*
- * mv64x60_config_resources()
- *
- * Calculate the offsets, etc. for the hose structures to reflect all of
- * the address remapping that happens as you go from CPU->PCI and PCI->MEM.
- */
-void __init
-mv64x60_config_resources(struct pci_controller *hose,
-	struct mv64x60_pci_info *pi, u32 io_base)
-{
-	int		i;
-	/* 2 hoses; 4 resources/hose; string <= 64 bytes */
-	static char	s[2][4][64];
-
-	if (pi->pci_io.size != 0) {
-		sprintf(s[hose->index][0], "PCI hose %d I/O Space",
-			hose->index);
-		pci_init_resource(&hose->io_resource, io_base - isa_io_base,
-			io_base - isa_io_base + pi->pci_io.size - 1,
-			IORESOURCE_IO, s[hose->index][0]);
-		hose->io_space.start = pi->pci_io.pci_base_lo;
-		hose->io_space.end = pi->pci_io.pci_base_lo + pi->pci_io.size-1;
-		hose->io_base_phys = pi->pci_io.cpu_base;
-		hose->io_base_virt = (void *)isa_io_base;
-	}
-
-	for (i=0; i<3; i++)
-		if (pi->pci_mem[i].size != 0) {
-			sprintf(s[hose->index][i+1], "PCI hose %d MEM Space %d",
-				hose->index, i);
-			pci_init_resource(&hose->mem_resources[i],
-				pi->pci_mem[i].cpu_base,
-				pi->pci_mem[i].cpu_base + pi->pci_mem[i].size-1,
-				IORESOURCE_MEM, s[hose->index][i+1]);
-		}
-
-	hose->mem_space.end = pi->pci_mem[0].pci_base_lo +
-						pi->pci_mem[0].size - 1;
-	hose->pci_mem_offset = pi->pci_mem[0].cpu_base -
-						pi->pci_mem[0].pci_base_lo;
-}
-
-/*
- * mv64x60_config_pci_params()
- *
- * Configure a hose's PCI config space parameters.
- */
-void __init
-mv64x60_config_pci_params(struct pci_controller *hose,
-	struct mv64x60_pci_info *pi)
-{
-	u32	devfn;
-	u16	u16_val;
-	u8	save_exclude;
-
-	devfn = PCI_DEVFN(0,0);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-
-	/* Set class code to indicate host bridge */
-	u16_val = PCI_CLASS_BRIDGE_HOST; /* 0x0600 (host bridge) */
-	early_write_config_word(hose, 0, devfn, PCI_CLASS_DEVICE, u16_val);
-
-	/* Enable bridge to be PCI master & respond to PCI MEM cycles */
-	early_read_config_word(hose, 0, devfn, PCI_COMMAND, &u16_val);
-	u16_val &= ~(PCI_COMMAND_IO | PCI_COMMAND_INVALIDATE |
-		PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK);
-	u16_val |= pi->pci_cmd_bits | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-	early_write_config_word(hose, 0, devfn, PCI_COMMAND, u16_val);
-
-	/* Set latency timer, cache line size, clear BIST */
-	u16_val = (pi->latency_timer << 8) | (L1_CACHE_BYTES >> 2);
-	early_write_config_word(hose, 0, devfn, PCI_CACHE_LINE_SIZE, u16_val);
-
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- *****************************************************************************
- *
- *	PCI Related Routine
- *
- *****************************************************************************
- */
-/*
- * mv64x60_set_bus()
- *
- * Set the bus number for the hose directly under the bridge.
- */
-void __init
-mv64x60_set_bus(struct mv64x60_handle *bh, u32 bus, u32 child_bus)
-{
-	struct pci_controller	*hose;
-	u32	pci_mode, p2p_cfg, pci_cfg_offset, val;
-	u8	save_exclude;
-
-	if (bus == 0) {
-		pci_mode = bh->pci_mode_a;
-		p2p_cfg = MV64x60_PCI0_P2P_CONFIG;
-		pci_cfg_offset = 0x64;
-		hose = bh->hose_a;
-	} else {
-		pci_mode = bh->pci_mode_b;
-		p2p_cfg = MV64x60_PCI1_P2P_CONFIG;
-		pci_cfg_offset = 0xe4;
-		hose = bh->hose_b;
-	}
-
-	child_bus &= 0xff;
-	val = mv64x60_read(bh, p2p_cfg);
-
-	if (pci_mode == MV64x60_PCIMODE_CONVENTIONAL) {
-		val &= 0xe0000000; /* Force dev num to 0, turn off P2P bridge */
-		val |= (child_bus << 16) | 0xff;
-		mv64x60_write(bh, p2p_cfg, val);
-		(void)mv64x60_read(bh, p2p_cfg); /* Flush FIFO */
-	} else { /* PCI-X */
-		/*
-		 * Need to use the current bus/dev number (that's in the
-		 * P2P CONFIG reg) to access the bridge's pci config space.
-		 */
-		save_exclude = mv64x60_pci_exclude_bridge;
-		mv64x60_pci_exclude_bridge = 0;
-		early_write_config_dword(hose, (val & 0x00ff0000) >> 16,
-			PCI_DEVFN(((val & 0x1f000000) >> 24), 0),
-			pci_cfg_offset, child_bus << 8);
-		mv64x60_pci_exclude_bridge = save_exclude;
-	}
-}
-
-/*
- * mv64x60_pci_exclude_device()
- *
- * This routine is used to make the bridge not appear when the
- * PCI subsystem is accessing PCI devices (in PCI config space).
- */
-int
-mv64x60_pci_exclude_device(u8 bus, u8 devfn)
-{
-	struct pci_controller	*hose;
-
-	hose = pci_bus_to_hose(bus);
-
-	/* Skip slot 0 on both hoses */
-	if ((mv64x60_pci_exclude_bridge == 1) && (PCI_SLOT(devfn) == 0) &&
-		(hose->first_busno == bus))
-
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	else
-		return PCIBIOS_SUCCESSFUL;
-} /* mv64x60_pci_exclude_device() */
-
-/*
- *****************************************************************************
- *
- *	Platform Device Routines
- *
- *****************************************************************************
- */
-
-/*
- * mv64x60_pd_fixup()
- *
- * Need to add the base addr of where the bridge's regs are mapped in the
- * physical addr space so drivers can ioremap() them.
- */
-void __init
-mv64x60_pd_fixup(struct mv64x60_handle *bh, struct platform_device *pd_devs[],
-	u32 entries)
-{
-	struct resource	*r;
-	u32		i, j;
-
-	for (i=0; i<entries; i++) {
-		j = 0;
-
-		while ((r = platform_get_resource(pd_devs[i],IORESOURCE_MEM,j))
-			!= NULL) {
-
-			r->start += bh->p_base;
-			r->end += bh->p_base;
-			j++;
-		}
-	}
-}
-
-/*
- * mv64x60_add_pds()
- *
- * Add the mv64x60 platform devices to the list of platform devices.
- */
-static int __init
-mv64x60_add_pds(void)
-{
-	return platform_add_devices(mv64x60_pd_devs,
-		ARRAY_SIZE(mv64x60_pd_devs));
-}
-arch_initcall(mv64x60_add_pds);
-
-/*
- *****************************************************************************
- *
- *	GT64260-Specific Routines
- *
- *****************************************************************************
- */
-/*
- * gt64260_translate_size()
- *
- * On the GT64260, the size register is really the "top" address of the window.
- */
-static u32 __init
-gt64260_translate_size(u32 base, u32 size, u32 num_bits)
-{
-	return base + mv64x60_mask(size - 1, num_bits);
-}
-
-/*
- * gt64260_untranslate_size()
- *
- * Translate the top address of a window into a window size.
- */
-static u32 __init
-gt64260_untranslate_size(u32 base, u32 size, u32 num_bits)
-{
-	if (size >= base)
-		size = size - base + (1 << (32 - num_bits));
-	else
-		size = 0;
-
-	return size;
-}
-
-/*
- * gt64260_set_pci2mem_window()
- *
- * The PCI->MEM window registers are actually in PCI config space so need
- * to set them by setting the correct config space BARs.
- */
-static u32 gt64260_reg_addrs[2][4] __initdata = {
-	{ 0x10, 0x14, 0x18, 0x1c }, { 0x90, 0x94, 0x98, 0x9c }
-};
-
-static void __init
-gt64260_set_pci2mem_window(struct pci_controller *hose, u32 bus, u32 window,
-	u32 base)
-{
-	u8	save_exclude;
-
-	pr_debug("set pci->mem window: %d, hose: %d, base: 0x%x\n", window,
-		hose->index, base);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_write_config_dword(hose, 0, PCI_DEVFN(0, 0),
-		gt64260_reg_addrs[bus][window], mv64x60_mask(base, 20) | 0x8);
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- * gt64260_set_pci2regs_window()
- *
- * Set where the bridge's registers appear in PCI MEM space.
- */
-static u32 gt64260_offset[2] __initdata = {0x20, 0xa0};
-
-static void __init
-gt64260_set_pci2regs_window(struct mv64x60_handle *bh,
-	struct pci_controller *hose, u32 bus, u32 base)
-{
-	u8	save_exclude;
-
-	pr_debug("set pci->internal regs hose: %d, base: 0x%x\n", hose->index,
-		base);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_write_config_dword(hose, 0, PCI_DEVFN(0,0), gt64260_offset[bus],
-		(base << 16));
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- * gt64260_is_enabled_32bit()
- *
- * On a GT64260, a window is enabled iff its top address is >= to its base
- * address.
- */
-static u32 __init
-gt64260_is_enabled_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	u32	rc = 0;
-
-	if ((gt64260_32bit_windows[window].base_reg != 0) &&
-		(gt64260_32bit_windows[window].size_reg != 0) &&
-		((mv64x60_read(bh, gt64260_32bit_windows[window].size_reg) &
-			((1 << gt64260_32bit_windows[window].size_bits) - 1)) >=
-		 (mv64x60_read(bh, gt64260_32bit_windows[window].base_reg) &
-			((1 << gt64260_32bit_windows[window].base_bits) - 1))))
-
-		rc = 1;
-
-	return rc;
-}
-
-/*
- * gt64260_enable_window_32bit()
- *
- * On the GT64260, a window is enabled iff the top address is >= to the base
- * address of the window.  Since the window has already been configured by
- * the time this routine is called, we have nothing to do here.
- */
-static void __init
-gt64260_enable_window_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("enable 32bit window: %d\n", window);
-}
-
-/*
- * gt64260_disable_window_32bit()
- *
- * On a GT64260, you disable a window by setting its top address to be less
- * than its base address.
- */
-static void __init
-gt64260_disable_window_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("disable 32bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
-		window, gt64260_32bit_windows[window].base_reg,
-		gt64260_32bit_windows[window].size_reg);
-
-	if ((gt64260_32bit_windows[window].base_reg != 0) &&
-		(gt64260_32bit_windows[window].size_reg != 0)) {
-
-		/* To disable, make bottom reg higher than top reg */
-		mv64x60_write(bh, gt64260_32bit_windows[window].base_reg,0xfff);
-		mv64x60_write(bh, gt64260_32bit_windows[window].size_reg, 0);
-	}
-}
-
-/*
- * gt64260_enable_window_64bit()
- *
- * On the GT64260, a window is enabled iff the top address is >= to the base
- * address of the window.  Since the window has already been configured by
- * the time this routine is called, we have nothing to do here.
- */
-static void __init
-gt64260_enable_window_64bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("enable 64bit window: %d\n", window);
-}
-
-/*
- * gt64260_disable_window_64bit()
- *
- * On a GT64260, you disable a window by setting its top address to be less
- * than its base address.
- */
-static void __init
-gt64260_disable_window_64bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("disable 64bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
-		window, gt64260_64bit_windows[window].base_lo_reg,
-		gt64260_64bit_windows[window].size_reg);
-
-	if ((gt64260_64bit_windows[window].base_lo_reg != 0) &&
-		(gt64260_64bit_windows[window].size_reg != 0)) {
-
-		/* To disable, make bottom reg higher than top reg */
-		mv64x60_write(bh, gt64260_64bit_windows[window].base_lo_reg,
-									0xfff);
-		mv64x60_write(bh, gt64260_64bit_windows[window].base_hi_reg, 0);
-		mv64x60_write(bh, gt64260_64bit_windows[window].size_reg, 0);
-	}
-}
-
-/*
- * gt64260_disable_all_windows()
- *
- * The GT64260 has several windows that aren't represented in the table of
- * windows at the top of this file.  This routine turns all of them off
- * except for the memory controller windows, of course.
- */
-static void __init
-gt64260_disable_all_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-	u32	i, preserve;
-
-	/* Disable 32bit windows (don't disable cpu->mem windows) */
-	for (i=MV64x60_CPU2DEV_0_WIN; i<MV64x60_32BIT_WIN_COUNT; i++) {
-		if (i < 32)
-			preserve = si->window_preserve_mask_32_lo & (1 << i);
-		else
-			preserve = si->window_preserve_mask_32_hi & (1<<(i-32));
-
-		if (!preserve)
-			gt64260_disable_window_32bit(bh, i);
-	}
-
-	/* Disable 64bit windows */
-	for (i=0; i<MV64x60_64BIT_WIN_COUNT; i++)
-		if (!(si->window_preserve_mask_64 & (1<<i)))
-			gt64260_disable_window_64bit(bh, i);
-
-	/* Turn off cpu protection windows not in gt64260_32bit_windows[] */
-	mv64x60_write(bh, GT64260_CPU_PROT_BASE_4, 0xfff);
-	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_4, 0);
-	mv64x60_write(bh, GT64260_CPU_PROT_BASE_5, 0xfff);
-	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_5, 0);
-	mv64x60_write(bh, GT64260_CPU_PROT_BASE_6, 0xfff);
-	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_6, 0);
-	mv64x60_write(bh, GT64260_CPU_PROT_BASE_7, 0xfff);
-	mv64x60_write(bh, GT64260_CPU_PROT_SIZE_7, 0);
-
-	/* Turn off PCI->MEM access cntl wins not in gt64260_64bit_windows[] */
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_4_BASE_LO, 0xfff);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_4_BASE_HI, 0);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_4_SIZE, 0);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_5_BASE_LO, 0xfff);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_5_BASE_HI, 0);
-	mv64x60_write(bh, MV64x60_PCI0_ACC_CNTL_5_SIZE, 0);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_6_BASE_LO, 0xfff);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_6_BASE_HI, 0);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_6_SIZE, 0);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_7_BASE_LO, 0xfff);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_7_BASE_HI, 0);
-	mv64x60_write(bh, GT64260_PCI0_ACC_CNTL_7_SIZE, 0);
-
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_4_BASE_LO, 0xfff);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_4_BASE_HI, 0);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_4_SIZE, 0);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_5_BASE_LO, 0xfff);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_5_BASE_HI, 0);
-	mv64x60_write(bh, MV64x60_PCI1_ACC_CNTL_5_SIZE, 0);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_6_BASE_LO, 0xfff);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_6_BASE_HI, 0);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_6_SIZE, 0);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_7_BASE_LO, 0xfff);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_7_BASE_HI, 0);
-	mv64x60_write(bh, GT64260_PCI1_ACC_CNTL_7_SIZE, 0);
-
-	/* Disable all PCI-><whatever> windows */
-	mv64x60_set_bits(bh, MV64x60_PCI0_BAR_ENABLE, 0x07fffdff);
-	mv64x60_set_bits(bh, MV64x60_PCI1_BAR_ENABLE, 0x07fffdff);
-
-	/*
-	 * Some firmwares enable a bunch of intr sources
-	 * for the PCI INT output pins.
-	 */
-	mv64x60_write(bh, GT64260_IC_CPU_INTR_MASK_LO, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INTR_MASK_HI, 0);
-	mv64x60_write(bh, GT64260_IC_PCI0_INTR_MASK_LO, 0);
-	mv64x60_write(bh, GT64260_IC_PCI0_INTR_MASK_HI, 0);
-	mv64x60_write(bh, GT64260_IC_PCI1_INTR_MASK_LO, 0);
-	mv64x60_write(bh, GT64260_IC_PCI1_INTR_MASK_HI, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INT_0_MASK, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INT_1_MASK, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INT_2_MASK, 0);
-	mv64x60_write(bh, GT64260_IC_CPU_INT_3_MASK, 0);
-}
-
-/*
- * gt64260a_chip_specific_init()
- *
- * Implement errata workarounds for the GT64260A.
- */
-static void __init
-gt64260a_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-#ifdef CONFIG_SERIAL_MPSC
-	struct resource	*r;
-#endif
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	u32	val;
-	u8	save_exclude;
-#endif
-
-	if (si->pci_0.enable_bus)
-		mv64x60_set_bits(bh, MV64x60_PCI0_CMD,
-			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
-
-	if (si->pci_1.enable_bus)
-		mv64x60_set_bits(bh, MV64x60_PCI1_CMD,
-			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
-
-	/*
-	 * Dave Wilhardt found that bit 4 in the PCI Command registers must
-	 * be set if you are using cache coherency.
-	 */
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	/* Res #MEM-4 -- cpu read buffer to buffer 1 */
-	if ((mv64x60_read(bh, MV64x60_CPU_MODE) & 0xf0) == 0x40)
-		mv64x60_set_bits(bh, GT64260_SDRAM_CONFIG, (1<<26));
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	if (si->pci_0.enable_bus) {
-		early_read_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, &val);
-		val |= PCI_COMMAND_INVALIDATE;
-		early_write_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, val);
-	}
-
-	if (si->pci_1.enable_bus) {
-		early_read_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, &val);
-		val |= PCI_COMMAND_INVALIDATE;
-		early_write_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, val);
-	}
-	mv64x60_pci_exclude_bridge = save_exclude;
-#endif
-
-	/* Disable buffer/descriptor snooping */
-	mv64x60_clr_bits(bh, 0xf280, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
-	mv64x60_clr_bits(bh, 0xf2c0, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
-
-#ifdef CONFIG_SERIAL_MPSC
-	mv64x60_mpsc0_pdata.mirror_regs = 1;
-	mv64x60_mpsc0_pdata.cache_mgmt = 1;
-	mv64x60_mpsc1_pdata.mirror_regs = 1;
-	mv64x60_mpsc1_pdata.cache_mgmt = 1;
-
-	if ((r = platform_get_resource(&mpsc1_device, IORESOURCE_IRQ, 0))
-			!= NULL) {
-		r->start = MV64x60_IRQ_SDMA_0;
-		r->end = MV64x60_IRQ_SDMA_0;
-	}
-#endif
-}
-
-/*
- * gt64260b_chip_specific_init()
- *
- * Implement errata workarounds for the GT64260B.
- */
-static void __init
-gt64260b_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-#ifdef CONFIG_SERIAL_MPSC
-	struct resource	*r;
-#endif
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	u32	val;
-	u8	save_exclude;
-#endif
-
-	if (si->pci_0.enable_bus)
-		mv64x60_set_bits(bh, MV64x60_PCI0_CMD,
-			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
-
-	if (si->pci_1.enable_bus)
-		mv64x60_set_bits(bh, MV64x60_PCI1_CMD,
-			((1<<4) | (1<<5) | (1<<9) | (1<<13)));
-
-	/*
-	 * Dave Wilhardt found that bit 4 in the PCI Command registers must
-	 * be set if you are using cache coherency.
-	 */
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_set_bits(bh, GT64260_CPU_WB_PRIORITY_BUFFER_DEPTH, 0xf);
-
-	/* Res #MEM-4 -- cpu read buffer to buffer 1 */
-	if ((mv64x60_read(bh, MV64x60_CPU_MODE) & 0xf0) == 0x40)
-		mv64x60_set_bits(bh, GT64260_SDRAM_CONFIG, (1<<26));
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	if (si->pci_0.enable_bus) {
-		early_read_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, &val);
-		val |= PCI_COMMAND_INVALIDATE;
-		early_write_config_dword(bh->hose_a, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, val);
-	}
-
-	if (si->pci_1.enable_bus) {
-		early_read_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, &val);
-		val |= PCI_COMMAND_INVALIDATE;
-		early_write_config_dword(bh->hose_b, 0, PCI_DEVFN(0,0),
-			PCI_COMMAND, val);
-	}
-	mv64x60_pci_exclude_bridge = save_exclude;
-#endif
-
-	/* Disable buffer/descriptor snooping */
-	mv64x60_clr_bits(bh, 0xf280, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
-	mv64x60_clr_bits(bh, 0xf2c0, (1<< 6) | (1<<14) | (1<<22) | (1<<30));
-
-#ifdef CONFIG_SERIAL_MPSC
-	/*
-	 * The 64260B is not supposed to have the bug where the MPSC & ENET
-	 * can't access cache coherent regions.  However, testing has shown
-	 * that the MPSC, at least, still has this bug.
-	 */
-	mv64x60_mpsc0_pdata.cache_mgmt = 1;
-	mv64x60_mpsc1_pdata.cache_mgmt = 1;
-
-	if ((r = platform_get_resource(&mpsc1_device, IORESOURCE_IRQ, 0))
-			!= NULL) {
-		r->start = MV64x60_IRQ_SDMA_0;
-		r->end = MV64x60_IRQ_SDMA_0;
-	}
-#endif
-}
-
-/*
- *****************************************************************************
- *
- *	MV64360-Specific Routines
- *
- *****************************************************************************
- */
-/*
- * mv64360_translate_size()
- *
- * On the MV64360, the size register is set similar to the size you get
- * from a pci config space BAR register.  That is, programmed from LSB to MSB
- * as a sequence of 1's followed by a sequence of 0's. IOW, "size -1" with the
- * assumption that the size is a power of 2.
- */
-static u32 __init
-mv64360_translate_size(u32 base_addr, u32 size, u32 num_bits)
-{
-	return mv64x60_mask(size - 1, num_bits);
-}
-
-/*
- * mv64360_untranslate_size()
- *
- * Translate the size register value of a window into a window size.
- */
-static u32 __init
-mv64360_untranslate_size(u32 base_addr, u32 size, u32 num_bits)
-{
-	if (size > 0) {
-		size >>= (32 - num_bits);
-		size++;
-		size <<= (32 - num_bits);
-	}
-
-	return size;
-}
-
-/*
- * mv64360_set_pci2mem_window()
- *
- * The PCI->MEM window registers are actually in PCI config space so need
- * to set them by setting the correct config space BARs.
- */
-struct {
-	u32	fcn;
-	u32	base_hi_bar;
-	u32	base_lo_bar;
-} static mv64360_reg_addrs[2][4] __initdata = {
-	{{ 0, 0x14, 0x10 }, { 0, 0x1c, 0x18 },
-	 { 1, 0x14, 0x10 }, { 1, 0x1c, 0x18 }},
-	{{ 0, 0x94, 0x90 }, { 0, 0x9c, 0x98 },
-	 { 1, 0x94, 0x90 }, { 1, 0x9c, 0x98 }}
-};
-
-static void __init
-mv64360_set_pci2mem_window(struct pci_controller *hose, u32 bus, u32 window,
-	u32 base)
-{
-	u8 save_exclude;
-
-	pr_debug("set pci->mem window: %d, hose: %d, base: 0x%x\n", window,
-		hose->index, base);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_write_config_dword(hose, 0,
-		PCI_DEVFN(0, mv64360_reg_addrs[bus][window].fcn),
-		mv64360_reg_addrs[bus][window].base_hi_bar, 0);
-	early_write_config_dword(hose, 0,
-		PCI_DEVFN(0, mv64360_reg_addrs[bus][window].fcn),
-		mv64360_reg_addrs[bus][window].base_lo_bar,
-		mv64x60_mask(base,20) | 0xc);
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- * mv64360_set_pci2regs_window()
- *
- * Set where the bridge's registers appear in PCI MEM space.
- */
-static u32 mv64360_offset[2][2] __initdata = {{0x20, 0x24}, {0xa0, 0xa4}};
-
-static void __init
-mv64360_set_pci2regs_window(struct mv64x60_handle *bh,
-	struct pci_controller *hose, u32 bus, u32 base)
-{
-	u8	save_exclude;
-
-	pr_debug("set pci->internal regs hose: %d, base: 0x%x\n", hose->index,
-		base);
-
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
-		mv64360_offset[bus][0], (base << 16));
-	early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
-		mv64360_offset[bus][1], 0);
-	mv64x60_pci_exclude_bridge = save_exclude;
-}
-
-/*
- * mv64360_is_enabled_32bit()
- *
- * On a MV64360, a window is enabled by either clearing a bit in the
- * CPU BAR Enable reg or setting a bit in the window's base reg.
- * Note that this doesn't work for windows on the PCI slave side but we don't
- * check those so its okay.
- */
-static u32 __init
-mv64360_is_enabled_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	u32	extra, rc = 0;
-
-	if (((mv64360_32bit_windows[window].base_reg != 0) &&
-		(mv64360_32bit_windows[window].size_reg != 0)) ||
-		(window == MV64x60_CPU2SRAM_WIN)) {
-
-		extra = mv64360_32bit_windows[window].extra;
-
-		switch (extra & MV64x60_EXTRA_MASK) {
-		case MV64x60_EXTRA_CPUWIN_ENAB:
-			rc = (mv64x60_read(bh, MV64360_CPU_BAR_ENABLE) &
-				(1 << (extra & 0x1f))) == 0;
-			break;
-
-		case MV64x60_EXTRA_CPUPROT_ENAB:
-			rc = (mv64x60_read(bh,
-				mv64360_32bit_windows[window].base_reg) &
-					(1 << (extra & 0x1f))) != 0;
-			break;
-
-		case MV64x60_EXTRA_ENET_ENAB:
-			rc = (mv64x60_read(bh, MV64360_ENET2MEM_BAR_ENABLE) &
-				(1 << (extra & 0x7))) == 0;
-			break;
-
-		case MV64x60_EXTRA_MPSC_ENAB:
-			rc = (mv64x60_read(bh, MV64360_MPSC2MEM_BAR_ENABLE) &
-				(1 << (extra & 0x3))) == 0;
-			break;
-
-		case MV64x60_EXTRA_IDMA_ENAB:
-			rc = (mv64x60_read(bh, MV64360_IDMA2MEM_BAR_ENABLE) &
-				(1 << (extra & 0x7))) == 0;
-			break;
-
-		default:
-			printk(KERN_ERR "mv64360_is_enabled: %s\n",
-				"32bit table corrupted");
-		}
-	}
-
-	return rc;
-}
-
-/*
- * mv64360_enable_window_32bit()
- *
- * On a MV64360, a window is enabled by either clearing a bit in the
- * CPU BAR Enable reg or setting a bit in the window's base reg.
- */
-static void __init
-mv64360_enable_window_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	u32	extra;
-
-	pr_debug("enable 32bit window: %d\n", window);
-
-	if (((mv64360_32bit_windows[window].base_reg != 0) &&
-		(mv64360_32bit_windows[window].size_reg != 0)) ||
-		(window == MV64x60_CPU2SRAM_WIN)) {
-
-		extra = mv64360_32bit_windows[window].extra;
-
-		switch (extra & MV64x60_EXTRA_MASK) {
-		case MV64x60_EXTRA_CPUWIN_ENAB:
-			mv64x60_clr_bits(bh, MV64360_CPU_BAR_ENABLE,
-				(1 << (extra & 0x1f)));
-			break;
-
-		case MV64x60_EXTRA_CPUPROT_ENAB:
-			mv64x60_set_bits(bh,
-				mv64360_32bit_windows[window].base_reg,
-				(1 << (extra & 0x1f)));
-			break;
-
-		case MV64x60_EXTRA_ENET_ENAB:
-			mv64x60_clr_bits(bh, MV64360_ENET2MEM_BAR_ENABLE,
-				(1 << (extra & 0x7)));
-			break;
-
-		case MV64x60_EXTRA_MPSC_ENAB:
-			mv64x60_clr_bits(bh, MV64360_MPSC2MEM_BAR_ENABLE,
-				(1 << (extra & 0x3)));
-			break;
-
-		case MV64x60_EXTRA_IDMA_ENAB:
-			mv64x60_clr_bits(bh, MV64360_IDMA2MEM_BAR_ENABLE,
-				(1 << (extra & 0x7)));
-			break;
-
-		default:
-			printk(KERN_ERR "mv64360_enable: %s\n",
-				"32bit table corrupted");
-		}
-	}
-}
-
-/*
- * mv64360_disable_window_32bit()
- *
- * On a MV64360, a window is disabled by either setting a bit in the
- * CPU BAR Enable reg or clearing a bit in the window's base reg.
- */
-static void __init
-mv64360_disable_window_32bit(struct mv64x60_handle *bh, u32 window)
-{
-	u32	extra;
-
-	pr_debug("disable 32bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
-		window, mv64360_32bit_windows[window].base_reg,
-		mv64360_32bit_windows[window].size_reg);
-
-	if (((mv64360_32bit_windows[window].base_reg != 0) &&
-		(mv64360_32bit_windows[window].size_reg != 0)) ||
-		(window == MV64x60_CPU2SRAM_WIN)) {
-
-		extra = mv64360_32bit_windows[window].extra;
-
-		switch (extra & MV64x60_EXTRA_MASK) {
-		case MV64x60_EXTRA_CPUWIN_ENAB:
-			mv64x60_set_bits(bh, MV64360_CPU_BAR_ENABLE,
-				(1 << (extra & 0x1f)));
-			break;
-
-		case MV64x60_EXTRA_CPUPROT_ENAB:
-			mv64x60_clr_bits(bh,
-				mv64360_32bit_windows[window].base_reg,
-				(1 << (extra & 0x1f)));
-			break;
-
-		case MV64x60_EXTRA_ENET_ENAB:
-			mv64x60_set_bits(bh, MV64360_ENET2MEM_BAR_ENABLE,
-				(1 << (extra & 0x7)));
-			break;
-
-		case MV64x60_EXTRA_MPSC_ENAB:
-			mv64x60_set_bits(bh, MV64360_MPSC2MEM_BAR_ENABLE,
-				(1 << (extra & 0x3)));
-			break;
-
-		case MV64x60_EXTRA_IDMA_ENAB:
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_BAR_ENABLE,
-				(1 << (extra & 0x7)));
-			break;
-
-		default:
-			printk(KERN_ERR "mv64360_disable: %s\n",
-				"32bit table corrupted");
-		}
-	}
-}
-
-/*
- * mv64360_enable_window_64bit()
- *
- * On the MV64360, a 64-bit window is enabled by setting a bit in the window's
- * base reg.
- */
-static void __init
-mv64360_enable_window_64bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("enable 64bit window: %d\n", window);
-
-	if ((mv64360_64bit_windows[window].base_lo_reg!= 0) &&
-		(mv64360_64bit_windows[window].size_reg != 0)) {
-
-		if ((mv64360_64bit_windows[window].extra & MV64x60_EXTRA_MASK)
-				== MV64x60_EXTRA_PCIACC_ENAB)
-			mv64x60_set_bits(bh,
-				mv64360_64bit_windows[window].base_lo_reg,
-				(1 << (mv64360_64bit_windows[window].extra &
-									0x1f)));
-		else
-			printk(KERN_ERR "mv64360_enable: %s\n",
-				"64bit table corrupted");
-	}
-}
-
-/*
- * mv64360_disable_window_64bit()
- *
- * On a MV64360, a 64-bit window is disabled by clearing a bit in the window's
- * base reg.
- */
-static void __init
-mv64360_disable_window_64bit(struct mv64x60_handle *bh, u32 window)
-{
-	pr_debug("disable 64bit window: %d, base_reg: 0x%x, size_reg: 0x%x\n",
-		window, mv64360_64bit_windows[window].base_lo_reg,
-		mv64360_64bit_windows[window].size_reg);
-
-	if ((mv64360_64bit_windows[window].base_lo_reg != 0) &&
-			(mv64360_64bit_windows[window].size_reg != 0)) {
-		if ((mv64360_64bit_windows[window].extra & MV64x60_EXTRA_MASK)
-				== MV64x60_EXTRA_PCIACC_ENAB)
-			mv64x60_clr_bits(bh,
-				mv64360_64bit_windows[window].base_lo_reg,
-				(1 << (mv64360_64bit_windows[window].extra &
-									0x1f)));
-		else
-			printk(KERN_ERR "mv64360_disable: %s\n",
-				"64bit table corrupted");
-	}
-}
-
-/*
- * mv64360_disable_all_windows()
- *
- * The MV64360 has a few windows that aren't represented in the table of
- * windows at the top of this file.  This routine turns all of them off
- * except for the memory controller windows, of course.
- */
-static void __init
-mv64360_disable_all_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-	u32	preserve, i;
-
-	/* Disable 32bit windows (don't disable cpu->mem windows) */
-	for (i=MV64x60_CPU2DEV_0_WIN; i<MV64x60_32BIT_WIN_COUNT; i++) {
-		if (i < 32)
-			preserve = si->window_preserve_mask_32_lo & (1 << i);
-		else
-			preserve = si->window_preserve_mask_32_hi & (1<<(i-32));
-
-		if (!preserve)
-			mv64360_disable_window_32bit(bh, i);
-	}
-
-	/* Disable 64bit windows */
-	for (i=0; i<MV64x60_64BIT_WIN_COUNT; i++)
-		if (!(si->window_preserve_mask_64 & (1<<i)))
-			mv64360_disable_window_64bit(bh, i);
-
-	/* Turn off PCI->MEM access cntl wins not in mv64360_64bit_windows[] */
-	mv64x60_clr_bits(bh, MV64x60_PCI0_ACC_CNTL_4_BASE_LO, 0);
-	mv64x60_clr_bits(bh, MV64x60_PCI0_ACC_CNTL_5_BASE_LO, 0);
-	mv64x60_clr_bits(bh, MV64x60_PCI1_ACC_CNTL_4_BASE_LO, 0);
-	mv64x60_clr_bits(bh, MV64x60_PCI1_ACC_CNTL_5_BASE_LO, 0);
-
-	/* Disable all PCI-><whatever> windows */
-	mv64x60_set_bits(bh, MV64x60_PCI0_BAR_ENABLE, 0x0000f9ff);
-	mv64x60_set_bits(bh, MV64x60_PCI1_BAR_ENABLE, 0x0000f9ff);
-}
-
-/*
- * mv64360_config_io2mem_windows()
- *
- * ENET, MPSC, and IDMA ctlrs on the MV64[34]60 have separate windows that
- * must be set up so that the respective ctlr can access system memory.
- */
-static u32 enet_tab[MV64x60_CPU2MEM_WINDOWS] __initdata = {
-	MV64x60_ENET2MEM_0_WIN, MV64x60_ENET2MEM_1_WIN,
-	MV64x60_ENET2MEM_2_WIN, MV64x60_ENET2MEM_3_WIN,
-};
-
-static u32 mpsc_tab[MV64x60_CPU2MEM_WINDOWS] __initdata = {
-	MV64x60_MPSC2MEM_0_WIN, MV64x60_MPSC2MEM_1_WIN,
-	MV64x60_MPSC2MEM_2_WIN, MV64x60_MPSC2MEM_3_WIN,
-};
-
-static u32 idma_tab[MV64x60_CPU2MEM_WINDOWS] __initdata = {
-	MV64x60_IDMA2MEM_0_WIN, MV64x60_IDMA2MEM_1_WIN,
-	MV64x60_IDMA2MEM_2_WIN, MV64x60_IDMA2MEM_3_WIN,
-};
-
-static u32 dram_selects[MV64x60_CPU2MEM_WINDOWS] __initdata =
-	{ 0xe, 0xd, 0xb, 0x7 };
-
-static void __init
-mv64360_config_io2mem_windows(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si,
-	u32 mem_windows[MV64x60_CPU2MEM_WINDOWS][2])
-{
-	u32	i, win;
-
-	pr_debug("config_io2regs_windows: enet, mpsc, idma -> bridge regs\n");
-
-	mv64x60_write(bh, MV64360_ENET2MEM_ACC_PROT_0, 0);
-	mv64x60_write(bh, MV64360_ENET2MEM_ACC_PROT_1, 0);
-	mv64x60_write(bh, MV64360_ENET2MEM_ACC_PROT_2, 0);
-
-	mv64x60_write(bh, MV64360_MPSC2MEM_ACC_PROT_0, 0);
-	mv64x60_write(bh, MV64360_MPSC2MEM_ACC_PROT_1, 0);
-
-	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_0, 0);
-	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_1, 0);
-	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_2, 0);
-	mv64x60_write(bh, MV64360_IDMA2MEM_ACC_PROT_3, 0);
-
-	/* Assume that mem ctlr has no more windows than embedded I/O ctlr */
-	for (win=MV64x60_CPU2MEM_0_WIN,i=0;win<=MV64x60_CPU2MEM_3_WIN;win++,i++)
-		if (bh->ci->is_enabled_32bit(bh, win)) {
-			mv64x60_set_32bit_window(bh, enet_tab[i],
-				mem_windows[i][0], mem_windows[i][1],
-				(dram_selects[i] << 8) |
-				(si->enet_options[i] & 0x3000));
-			bh->ci->enable_window_32bit(bh, enet_tab[i]);
-
-			/* Give enet r/w access to memory region */
-			mv64x60_set_bits(bh, MV64360_ENET2MEM_ACC_PROT_0,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_ENET2MEM_ACC_PROT_1,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_ENET2MEM_ACC_PROT_2,
-				(0x3 << (i << 1)));
-
-			mv64x60_set_32bit_window(bh, mpsc_tab[i],
-				mem_windows[i][0], mem_windows[i][1],
-				(dram_selects[i] << 8) |
-				(si->mpsc_options[i] & 0x3000));
-			bh->ci->enable_window_32bit(bh, mpsc_tab[i]);
-
-			/* Give mpsc r/w access to memory region */
-			mv64x60_set_bits(bh, MV64360_MPSC2MEM_ACC_PROT_0,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_MPSC2MEM_ACC_PROT_1,
-				(0x3 << (i << 1)));
-
-			mv64x60_set_32bit_window(bh, idma_tab[i],
-				mem_windows[i][0], mem_windows[i][1],
-				(dram_selects[i] << 8) |
-				(si->idma_options[i] & 0x3000));
-			bh->ci->enable_window_32bit(bh, idma_tab[i]);
-
-			/* Give idma r/w access to memory region */
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_0,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_1,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_2,
-				(0x3 << (i << 1)));
-			mv64x60_set_bits(bh, MV64360_IDMA2MEM_ACC_PROT_3,
-				(0x3 << (i << 1)));
-		}
-}
-
-/*
- * mv64360_set_mpsc2regs_window()
- *
- * MPSC has a window to the bridge's internal registers.  Call this routine
- * to change that window so it doesn't conflict with the windows mapping the
- * mpsc to system memory.
- */
-static void __init
-mv64360_set_mpsc2regs_window(struct mv64x60_handle *bh, u32 base)
-{
-	pr_debug("set mpsc->internal regs, base: 0x%x\n", base);
-	mv64x60_write(bh, MV64360_MPSC2REGS_BASE, base & 0xffff0000);
-}
-
-/*
- * mv64360_chip_specific_init()
- *
- * Implement errata workarounds for the MV64360.
- */
-static void __init
-mv64360_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_set_bits(bh, MV64360_D_UNIT_CONTROL_HIGH, (1<<24));
-#endif
-#ifdef CONFIG_SERIAL_MPSC
-	mv64x60_mpsc0_pdata.brg_can_tune = 1;
-	mv64x60_mpsc0_pdata.cache_mgmt = 1;
-	mv64x60_mpsc1_pdata.brg_can_tune = 1;
-	mv64x60_mpsc1_pdata.cache_mgmt = 1;
-#endif
-}
-
-/*
- * mv64460_chip_specific_init()
- *
- * Implement errata workarounds for the MV64460.
- */
-static void __init
-mv64460_chip_specific_init(struct mv64x60_handle *bh,
-	struct mv64x60_setup_info *si)
-{
-#if !defined(CONFIG_NOT_COHERENT_CACHE)
-	mv64x60_set_bits(bh, MV64360_D_UNIT_CONTROL_HIGH, (1<<24) | (1<<25));
-	mv64x60_set_bits(bh, MV64460_D_UNIT_MMASK, (1<<1) | (1<<4));
-#endif
-#ifdef CONFIG_SERIAL_MPSC
-	mv64x60_mpsc0_pdata.brg_can_tune = 1;
-	mv64x60_mpsc0_pdata.cache_mgmt = 1;
-	mv64x60_mpsc1_pdata.brg_can_tune = 1;
-	mv64x60_mpsc1_pdata.cache_mgmt = 1;
-#endif
-}
-
-
-#if defined(CONFIG_SYSFS) && !defined(CONFIG_GT64260)
-/* Export the hotswap register via sysfs for enum event monitoring */
-#define	VAL_LEN_MAX	11 /* 32-bit hex or dec stringified number + '\n' */
-
-static DEFINE_MUTEX(mv64xxx_hs_lock);
-
-static ssize_t
-mv64xxx_hs_reg_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
-{
-	u32	v;
-	u8	save_exclude;
-
-	if (off > 0)
-		return 0;
-	if (count < VAL_LEN_MAX)
-		return -EINVAL;
-
-	if (mutex_lock_interruptible(&mv64xxx_hs_lock))
-		return -ERESTARTSYS;
-	save_exclude = mv64x60_pci_exclude_bridge;
-	mv64x60_pci_exclude_bridge = 0;
-	early_read_config_dword(&sysfs_hose_a, 0, PCI_DEVFN(0, 0),
-			MV64360_PCICFG_CPCI_HOTSWAP, &v);
-	mv64x60_pci_exclude_bridge = save_exclude;
-	mutex_unlock(&mv64xxx_hs_lock);
-
-	return sprintf(buf, "0x%08x\n", v);
-}
-
-static ssize_t
-mv64xxx_hs_reg_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
-{
-	u32	v;
-	u8	save_exclude;
-
-	if (off > 0)
-		return 0;
-	if (count <= 0)
-		return -EINVAL;
-
-	if (sscanf(buf, "%i", &v) == 1) {
-		if (mutex_lock_interruptible(&mv64xxx_hs_lock))
-			return -ERESTARTSYS;
-		save_exclude = mv64x60_pci_exclude_bridge;
-		mv64x60_pci_exclude_bridge = 0;
-		early_write_config_dword(&sysfs_hose_a, 0, PCI_DEVFN(0, 0),
-				MV64360_PCICFG_CPCI_HOTSWAP, v);
-		mv64x60_pci_exclude_bridge = save_exclude;
-		mutex_unlock(&mv64xxx_hs_lock);
-	}
-	else
-		count = -EINVAL;
-
-	return count;
-}
-
-static struct bin_attribute mv64xxx_hs_reg_attr = { /* Hotswap register */
-	.attr = {
-		.name = "hs_reg",
-		.mode = S_IRUGO | S_IWUSR,
-	},
-	.size  = VAL_LEN_MAX,
-	.read  = mv64xxx_hs_reg_read,
-	.write = mv64xxx_hs_reg_write,
-};
-
-/* Provide sysfs file indicating if this platform supports the hs_reg */
-static ssize_t
-mv64xxx_hs_reg_valid_show(struct device *dev, struct device_attribute *attr,
-		char *buf)
-{
-	struct platform_device	*pdev;
-	struct mv64xxx_pdata	*pdp;
-	u32			v;
-
-	pdev = container_of(dev, struct platform_device, dev);
-	pdp = (struct mv64xxx_pdata *)pdev->dev.platform_data;
-
-	if (mutex_lock_interruptible(&mv64xxx_hs_lock))
-		return -ERESTARTSYS;
-	v = pdp->hs_reg_valid;
-	mutex_unlock(&mv64xxx_hs_lock);
-
-	return sprintf(buf, "%i\n", v);
-}
-static DEVICE_ATTR(hs_reg_valid, S_IRUGO, mv64xxx_hs_reg_valid_show, NULL);
-
-static int __init
-mv64xxx_sysfs_init(void)
-{
-	sysfs_create_bin_file(&mv64xxx_device.dev.kobj, &mv64xxx_hs_reg_attr);
-	sysfs_create_file(&mv64xxx_device.dev.kobj,&dev_attr_hs_reg_valid.attr);
-	return 0;
-}
-subsys_initcall(mv64xxx_sysfs_init);
-#endif
diff --git a/arch/ppc/syslib/mv64x60_dbg.c b/arch/ppc/syslib/mv64x60_dbg.c
deleted file mode 100644
index e1876261e5dc..000000000000
--- a/arch/ppc/syslib/mv64x60_dbg.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * KGDB and progress routines for the Marvell/Galileo MV64x60 (Discovery).
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2003 (c) MontaVista Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- *****************************************************************************
- *
- *	Low-level MPSC/UART I/O routines
- *
- *****************************************************************************
- */
-
-
-#include <linux/irq.h>
-#include <asm/delay.h>
-#include <asm/mv64x60.h>
-#include <asm/machdep.h>
-
-
-#if defined(CONFIG_SERIAL_TEXT_DEBUG)
-
-#define	MPSC_CHR_1	0x000c
-#define	MPSC_CHR_2	0x0010
-
-static struct mv64x60_handle	mv64x60_dbg_bh;
-
-void
-mv64x60_progress_init(u32 base)
-{
-	mv64x60_dbg_bh.v_base = base;
-	return;
-}
-
-static void
-mv64x60_polled_putc(int chan, char c)
-{
-	u32	offset;
-
-	if (chan == 0)
-		offset = 0x8000;
-	else
-		offset = 0x9000;
-
-	mv64x60_write(&mv64x60_dbg_bh, offset + MPSC_CHR_1, (u32)c);
-	mv64x60_write(&mv64x60_dbg_bh, offset + MPSC_CHR_2, 0x200);
-	udelay(2000);
-}
-
-void
-mv64x60_mpsc_progress(char *s, unsigned short hex)
-{
-	volatile char	c;
-
-	mv64x60_polled_putc(0, '\r');
-
-	while ((c = *s++) != 0)
-		mv64x60_polled_putc(0, c);
-
-	mv64x60_polled_putc(0, '\n');
-	mv64x60_polled_putc(0, '\r');
-
-	return;
-}
-#endif	/* CONFIG_SERIAL_TEXT_DEBUG */
-
-
-#if defined(CONFIG_KGDB)
-
-#if defined(CONFIG_KGDB_TTYS0)
-#define KGDB_PORT 0
-#elif defined(CONFIG_KGDB_TTYS1)
-#define KGDB_PORT 1
-#else
-#error "Invalid kgdb_tty port"
-#endif
-
-void
-putDebugChar(unsigned char c)
-{
-	mv64x60_polled_putc(KGDB_PORT, (char)c);
-}
-
-int
-getDebugChar(void)
-{
-	unsigned char	c;
-
-	while (!mv64x60_polled_getc(KGDB_PORT, &c));
-	return (int)c;
-}
-
-void
-putDebugString(char* str)
-{
-	while (*str != '\0') {
-		putDebugChar(*str);
-		str++;
-	}
-	putDebugChar('\r');
-	return;
-}
-
-void
-kgdb_interruptible(int enable)
-{
-}
-
-void
-kgdb_map_scc(void)
-{
-	if (ppc_md.early_serial_map)
-		ppc_md.early_serial_map();
-}
-#endif	/* CONFIG_KGDB */
diff --git a/arch/ppc/syslib/mv64x60_win.c b/arch/ppc/syslib/mv64x60_win.c
deleted file mode 100644
index 4bf1ad17bf1a..000000000000
--- a/arch/ppc/syslib/mv64x60_win.c
+++ /dev/null
@@ -1,1165 +0,0 @@
-/*
- * Tables with info on how to manipulate the 32 & 64 bit windows on the
- * various types of Marvell bridge chips.
- *
- * Author: Mark A. Greer <mgreer@mvista.com>
- *
- * 2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/mv643xx.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/delay.h>
-#include <asm/mv64x60.h>
-
-
-/*
- *****************************************************************************
- *
- *	Tables describing how to set up windows on each type of bridge
- *
- *****************************************************************************
- */
-struct mv64x60_32bit_window
-	gt64260_32bit_windows[MV64x60_32BIT_WIN_COUNT] __initdata = {
-	/* CPU->MEM Windows */
-	[MV64x60_CPU2MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2MEM_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2MEM_1_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2MEM_2_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2MEM_3_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->Device Windows */
-	[MV64x60_CPU2DEV_0_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_0_BASE,
-		.size_reg		= MV64x60_CPU2DEV_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2DEV_1_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_1_BASE,
-		.size_reg		= MV64x60_CPU2DEV_1_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2DEV_2_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_2_BASE,
-		.size_reg		= MV64x60_CPU2DEV_2_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2DEV_3_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_3_BASE,
-		.size_reg		= MV64x60_CPU2DEV_3_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->Boot Window */
-	[MV64x60_CPU2BOOT_WIN] = {
-		.base_reg		= MV64x60_CPU2BOOT_0_BASE,
-		.size_reg		= MV64x60_CPU2BOOT_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 0 Windows */
-	[MV64x60_CPU2PCI0_IO_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_IO_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_IO_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_1_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_2_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_3_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 Windows */
-	[MV64x60_CPU2PCI1_IO_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_IO_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_IO_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_0_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_1_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_2_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_3_SIZE,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->SRAM Window (64260 has no integrated SRAM) */
-	/* CPU->PCI 0 Remap I/O Window */
-	[MV64x60_CPU2PCI0_IO_REMAP_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_IO_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 Remap I/O Window */
-	[MV64x60_CPU2PCI1_IO_REMAP_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_IO_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU Memory Protection Windows */
-	[MV64x60_CPU_PROT_0_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_0,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_0,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_PROT_1_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_1,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_1,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_PROT_2_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_2,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_2,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_PROT_3_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_3,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_3,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU Snoop Windows */
-	[MV64x60_CPU_SNOOP_0_WIN] = {
-		.base_reg		= GT64260_CPU_SNOOP_BASE_0,
-		.size_reg		= GT64260_CPU_SNOOP_SIZE_0,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_SNOOP_1_WIN] = {
-		.base_reg		= GT64260_CPU_SNOOP_BASE_1,
-		.size_reg		= GT64260_CPU_SNOOP_SIZE_1,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_SNOOP_2_WIN] = {
-		.base_reg		= GT64260_CPU_SNOOP_BASE_2,
-		.size_reg		= GT64260_CPU_SNOOP_SIZE_2,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU_SNOOP_3_WIN] = {
-		.base_reg		= GT64260_CPU_SNOOP_BASE_3,
-		.size_reg		= GT64260_CPU_SNOOP_SIZE_3,
-		.base_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 0->System Memory Remap Windows */
-	[MV64x60_PCI02MEM_REMAP_0_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_0_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_1_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_2_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_3_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	/* PCI 1->System Memory Remap Windows */
-	[MV64x60_PCI12MEM_REMAP_0_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_0_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_1_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_2_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_3_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	/* ENET->SRAM Window (64260 doesn't have separate windows) */
-	/* MPSC->SRAM Window (64260 doesn't have separate windows) */
-	/* IDMA->SRAM Window (64260 doesn't have separate windows) */
-};
-
-struct mv64x60_64bit_window
-	gt64260_64bit_windows[MV64x60_64BIT_WIN_COUNT] __initdata = {
-	/* CPU->PCI 0 MEM Remap Windows */
-	[MV64x60_CPU2PCI0_MEM_0_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_1_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_2_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_3_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 MEM Remap Windows */
-	[MV64x60_CPU2PCI1_MEM_0_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_1_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_2_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_3_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 12,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 0->MEM Access Control Windows */
-	[MV64x60_PCI02MEM_ACC_CNTL_0_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_0_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_1_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_1_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_2_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_2_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_3_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_3_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 1->MEM Access Control Windows */
-	[MV64x60_PCI12MEM_ACC_CNTL_0_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_0_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_1_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_1_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_2_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_2_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_3_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_3_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 0->MEM Snoop Windows */
-	[MV64x60_PCI02MEM_SNOOP_0_WIN] = {
-		.base_hi_reg		= GT64260_PCI0_SNOOP_0_BASE_HI,
-		.base_lo_reg		= GT64260_PCI0_SNOOP_0_BASE_LO,
-		.size_reg		= GT64260_PCI0_SNOOP_0_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_SNOOP_1_WIN] = {
-		.base_hi_reg		= GT64260_PCI0_SNOOP_1_BASE_HI,
-		.base_lo_reg		= GT64260_PCI0_SNOOP_1_BASE_LO,
-		.size_reg		= GT64260_PCI0_SNOOP_1_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_SNOOP_2_WIN] = {
-		.base_hi_reg		= GT64260_PCI0_SNOOP_2_BASE_HI,
-		.base_lo_reg		= GT64260_PCI0_SNOOP_2_BASE_LO,
-		.size_reg		= GT64260_PCI0_SNOOP_2_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_SNOOP_3_WIN] = {
-		.base_hi_reg		= GT64260_PCI0_SNOOP_3_BASE_HI,
-		.base_lo_reg		= GT64260_PCI0_SNOOP_3_BASE_LO,
-		.size_reg		= GT64260_PCI0_SNOOP_3_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 1->MEM Snoop Windows */
-	[MV64x60_PCI12MEM_SNOOP_0_WIN] = {
-		.base_hi_reg		= GT64260_PCI1_SNOOP_0_BASE_HI,
-		.base_lo_reg		= GT64260_PCI1_SNOOP_0_BASE_LO,
-		.size_reg		= GT64260_PCI1_SNOOP_0_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_SNOOP_1_WIN] = {
-		.base_hi_reg		= GT64260_PCI1_SNOOP_1_BASE_HI,
-		.base_lo_reg		= GT64260_PCI1_SNOOP_1_BASE_LO,
-		.size_reg		= GT64260_PCI1_SNOOP_1_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_SNOOP_2_WIN] = {
-		.base_hi_reg		= GT64260_PCI1_SNOOP_2_BASE_HI,
-		.base_lo_reg		= GT64260_PCI1_SNOOP_2_BASE_LO,
-		.size_reg		= GT64260_PCI1_SNOOP_2_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_SNOOP_3_WIN] = {
-		.base_hi_reg		= GT64260_PCI1_SNOOP_3_BASE_HI,
-		.base_lo_reg		= GT64260_PCI1_SNOOP_3_BASE_LO,
-		.size_reg		= GT64260_PCI1_SNOOP_3_SIZE,
-		.base_lo_bits		= 12,
-		.size_bits		= 12,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-};
-
-struct mv64x60_32bit_window
-	mv64360_32bit_windows[MV64x60_32BIT_WIN_COUNT] __initdata = {
-	/* CPU->MEM Windows */
-	[MV64x60_CPU2MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 0 },
-	[MV64x60_CPU2MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 1 },
-	[MV64x60_CPU2MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 2 },
-	[MV64x60_CPU2MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 3 },
-	/* CPU->Device Windows */
-	[MV64x60_CPU2DEV_0_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_0_BASE,
-		.size_reg		= MV64x60_CPU2DEV_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 4 },
-	[MV64x60_CPU2DEV_1_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_1_BASE,
-		.size_reg		= MV64x60_CPU2DEV_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 5 },
-	[MV64x60_CPU2DEV_2_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_2_BASE,
-		.size_reg		= MV64x60_CPU2DEV_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 6 },
-	[MV64x60_CPU2DEV_3_WIN] = {
-		.base_reg		= MV64x60_CPU2DEV_3_BASE,
-		.size_reg		= MV64x60_CPU2DEV_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 7 },
-	/* CPU->Boot Window */
-	[MV64x60_CPU2BOOT_WIN] = {
-		.base_reg		= MV64x60_CPU2BOOT_0_BASE,
-		.size_reg		= MV64x60_CPU2BOOT_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 8 },
-	/* CPU->PCI 0 Windows */
-	[MV64x60_CPU2PCI0_IO_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_IO_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_IO_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 9 },
-	[MV64x60_CPU2PCI0_MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 10 },
-	[MV64x60_CPU2PCI0_MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 11 },
-	[MV64x60_CPU2PCI0_MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 12 },
-	[MV64x60_CPU2PCI0_MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2PCI0_MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 13 },
-	/* CPU->PCI 1 Windows */
-	[MV64x60_CPU2PCI1_IO_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_IO_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_IO_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 14 },
-	[MV64x60_CPU2PCI1_MEM_0_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_0_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 15 },
-	[MV64x60_CPU2PCI1_MEM_1_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_1_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 16 },
-	[MV64x60_CPU2PCI1_MEM_2_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_2_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 17 },
-	[MV64x60_CPU2PCI1_MEM_3_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_MEM_3_BASE,
-		.size_reg		= MV64x60_CPU2PCI1_MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 18 },
-	/* CPU->SRAM Window */
-	[MV64x60_CPU2SRAM_WIN] = {
-		.base_reg		= MV64360_CPU2SRAM_BASE,
-		.size_reg		= 0,
-		.base_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUWIN_ENAB | 19 },
-	/* CPU->PCI 0 Remap I/O Window */
-	[MV64x60_CPU2PCI0_IO_REMAP_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI0_IO_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 Remap I/O Window */
-	[MV64x60_CPU2PCI1_IO_REMAP_WIN] = {
-		.base_reg		= MV64x60_CPU2PCI1_IO_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU Memory Protection Windows */
-	[MV64x60_CPU_PROT_0_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_0,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_0,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
-	[MV64x60_CPU_PROT_1_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_1,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_1,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
-	[MV64x60_CPU_PROT_2_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_2,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_2,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
-	[MV64x60_CPU_PROT_3_WIN] = {
-		.base_reg		= MV64x60_CPU_PROT_BASE_3,
-		.size_reg		= MV64x60_CPU_PROT_SIZE_3,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= MV64x60_EXTRA_CPUPROT_ENAB | 31 },
-	/* CPU Snoop Windows -- don't exist on 64360 */
-	/* PCI 0->System Memory Remap Windows */
-	[MV64x60_PCI02MEM_REMAP_0_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_0_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_1_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_2_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI02MEM_REMAP_3_WIN] = {
-		.base_reg		= MV64x60_PCI0_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	/* PCI 1->System Memory Remap Windows */
-	[MV64x60_PCI12MEM_REMAP_0_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_0_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_1_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_2_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	[MV64x60_PCI12MEM_REMAP_3_WIN] = {
-		.base_reg		= MV64x60_PCI1_SLAVE_MEM_1_REMAP,
-		.size_reg		= 0,
-		.base_bits		= 20,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= 0 },
-	/* ENET->System Memory Windows */
-	[MV64x60_ENET2MEM_0_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_0_BASE,
-		.size_reg		= MV64360_ENET2MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 0 },
-	[MV64x60_ENET2MEM_1_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_1_BASE,
-		.size_reg		= MV64360_ENET2MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 1 },
-	[MV64x60_ENET2MEM_2_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_2_BASE,
-		.size_reg		= MV64360_ENET2MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 2 },
-	[MV64x60_ENET2MEM_3_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_3_BASE,
-		.size_reg		= MV64360_ENET2MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 3 },
-	[MV64x60_ENET2MEM_4_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_4_BASE,
-		.size_reg		= MV64360_ENET2MEM_4_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 4 },
-	[MV64x60_ENET2MEM_5_WIN] = {
-		.base_reg		= MV64360_ENET2MEM_5_BASE,
-		.size_reg		= MV64360_ENET2MEM_5_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_ENET_ENAB | 5 },
-	/* MPSC->System Memory Windows */
-	[MV64x60_MPSC2MEM_0_WIN] = {
-		.base_reg		= MV64360_MPSC2MEM_0_BASE,
-		.size_reg		= MV64360_MPSC2MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_MPSC_ENAB | 0 },
-	[MV64x60_MPSC2MEM_1_WIN] = {
-		.base_reg		= MV64360_MPSC2MEM_1_BASE,
-		.size_reg		= MV64360_MPSC2MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_MPSC_ENAB | 1 },
-	[MV64x60_MPSC2MEM_2_WIN] = {
-		.base_reg		= MV64360_MPSC2MEM_2_BASE,
-		.size_reg		= MV64360_MPSC2MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_MPSC_ENAB | 2 },
-	[MV64x60_MPSC2MEM_3_WIN] = {
-		.base_reg		= MV64360_MPSC2MEM_3_BASE,
-		.size_reg		= MV64360_MPSC2MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_MPSC_ENAB | 3 },
-	/* IDMA->System Memory Windows */
-	[MV64x60_IDMA2MEM_0_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_0_BASE,
-		.size_reg		= MV64360_IDMA2MEM_0_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 0 },
-	[MV64x60_IDMA2MEM_1_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_1_BASE,
-		.size_reg		= MV64360_IDMA2MEM_1_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 1 },
-	[MV64x60_IDMA2MEM_2_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_2_BASE,
-		.size_reg		= MV64360_IDMA2MEM_2_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 2 },
-	[MV64x60_IDMA2MEM_3_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_3_BASE,
-		.size_reg		= MV64360_IDMA2MEM_3_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 3 },
-	[MV64x60_IDMA2MEM_4_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_4_BASE,
-		.size_reg		= MV64360_IDMA2MEM_4_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 4 },
-	[MV64x60_IDMA2MEM_5_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_5_BASE,
-		.size_reg		= MV64360_IDMA2MEM_5_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 5 },
-	[MV64x60_IDMA2MEM_6_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_6_BASE,
-		.size_reg		= MV64360_IDMA2MEM_6_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 6 },
-	[MV64x60_IDMA2MEM_7_WIN] = {
-		.base_reg		= MV64360_IDMA2MEM_7_BASE,
-		.size_reg		= MV64360_IDMA2MEM_7_SIZE,
-		.base_bits		= 16,
-		.size_bits		= 16,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_IDMA_ENAB | 7 },
-};
-
-struct mv64x60_64bit_window
-	mv64360_64bit_windows[MV64x60_64BIT_WIN_COUNT] __initdata = {
-	/* CPU->PCI 0 MEM Remap Windows */
-	[MV64x60_CPU2PCI0_MEM_0_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_0_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_1_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_1_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_2_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_2_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI0_MEM_3_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI0_MEM_3_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* CPU->PCI 1 MEM Remap Windows */
-	[MV64x60_CPU2PCI1_MEM_0_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_0_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_1_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_1_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_2_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_2_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	[MV64x60_CPU2PCI1_MEM_3_REMAP_WIN] = {
-		.base_hi_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_HI,
-		.base_lo_reg		= MV64x60_CPU2PCI1_MEM_3_REMAP_LO,
-		.size_reg		= 0,
-		.base_lo_bits		= 16,
-		.size_bits		= 0,
-		.get_from_field		= mv64x60_shift_left,
-		.map_to_field		= mv64x60_shift_right,
-		.extra			= 0 },
-	/* PCI 0->MEM Access Control Windows */
-	[MV64x60_PCI02MEM_ACC_CNTL_0_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_0_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_0_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_1_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_1_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_1_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_2_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_2_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_2_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI02MEM_ACC_CNTL_3_WIN] = {
-		.base_hi_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI0_ACC_CNTL_3_BASE_LO,
-		.size_reg		= MV64x60_PCI0_ACC_CNTL_3_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	/* PCI 1->MEM Access Control Windows */
-	[MV64x60_PCI12MEM_ACC_CNTL_0_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_0_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_0_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_1_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_1_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_1_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_2_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_2_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_2_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	[MV64x60_PCI12MEM_ACC_CNTL_3_WIN] = {
-		.base_hi_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_HI,
-		.base_lo_reg		= MV64x60_PCI1_ACC_CNTL_3_BASE_LO,
-		.size_reg		= MV64x60_PCI1_ACC_CNTL_3_SIZE,
-		.base_lo_bits		= 20,
-		.size_bits		= 20,
-		.get_from_field		= mv64x60_mask,
-		.map_to_field		= mv64x60_mask,
-		.extra			= MV64x60_EXTRA_PCIACC_ENAB | 0 },
-	/* PCI 0->MEM Snoop Windows -- don't exist on 64360 */
-	/* PCI 1->MEM Snoop Windows -- don't exist on 64360 */
-};
diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c
deleted file mode 100644
index a6fb7dcfa738..000000000000
--- a/arch/ppc/syslib/ocp.c
+++ /dev/null
@@ -1,482 +0,0 @@
-/*
- * ocp.c
- *
- *      (c) Benjamin Herrenschmidt (benh@kernel.crashing.org)
- *          Mipsys - France
- *
- *          Derived from work (c) Armin Kuster akuster@pacbell.net
- *
- *          Additional support and port to 2.6 LDM/sysfs by
- *          Matt Porter <mporter@kernel.crashing.org>
- *          Copyright 2004 MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  OCP (On Chip Peripheral) is a software emulated "bus" with a
- *  pseudo discovery method for dumb peripherals. Usually these type
- *  of peripherals are found on embedded SoC (System On a Chip)
- *  processors or highly integrated system controllers that have
- *  a host bridge and many peripherals.  Common examples where
- *  this is already used include the PPC4xx, MPC52xx,
- *  and MV64xxx parts.
- *
- *  This subsystem creates a standard OCP bus type within the
- *  device model.  The devices on the OCP bus are seeded by an
- *  an initial OCP device array created by the arch-specific
- *  Device entries can be added/removed/modified through OCP
- *  helper functions to accommodate system and  board-specific
- *  parameters commonly found in embedded systems. OCP also
- *  provides a standard method for devices to describe extended
- *  attributes about themselves to the system.  A standard access
- *  method allows OCP drivers to obtain the information, both
- *  SoC-specific and system/board-specific, needed for operation.
- */
-
-#include <linux/module.h>
-#include <linux/list.h>
-#include <linux/miscdevice.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/bootmem.h>
-#include <linux/device.h>
-#include <linux/rwsem.h>
-
-#include <asm/io.h>
-#include <asm/ocp.h>
-#include <asm/errno.h>
-
-//#define DBG(x)	printk x
-#define DBG(x)
-
-extern int mem_init_done;
-
-extern struct ocp_def core_ocp[];	/* Static list of devices, provided by
-					   CPU core */
-
-LIST_HEAD(ocp_devices);			/* List of all OCP devices */
-DECLARE_RWSEM(ocp_devices_sem);		/* Global semaphores for those lists */
-
-static int ocp_inited;
-
-/* Sysfs support */
-#define OCP_DEF_ATTR(field, format_string)				\
-static ssize_t								\
-show_##field(struct device *dev, struct device_attribute *attr, char *buf)				\
-{									\
-	struct ocp_device *odev = to_ocp_dev(dev);			\
-									\
-	return sprintf(buf, format_string, odev->def->field);		\
-}									\
-static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL);
-
-OCP_DEF_ATTR(vendor, "0x%04x\n");
-OCP_DEF_ATTR(function, "0x%04x\n");
-OCP_DEF_ATTR(index, "0x%04x\n");
-#ifdef CONFIG_PTE_64BIT
-OCP_DEF_ATTR(paddr, "0x%016Lx\n");
-#else
-OCP_DEF_ATTR(paddr, "0x%08lx\n");
-#endif
-OCP_DEF_ATTR(irq, "%d\n");
-OCP_DEF_ATTR(pm, "%lu\n");
-
-void ocp_create_sysfs_dev_files(struct ocp_device *odev)
-{
-	struct device *dev = &odev->dev;
-
-	/* Current OCP device def attributes */
-	device_create_file(dev, &dev_attr_vendor);
-	device_create_file(dev, &dev_attr_function);
-	device_create_file(dev, &dev_attr_index);
-	device_create_file(dev, &dev_attr_paddr);
-	device_create_file(dev, &dev_attr_irq);
-	device_create_file(dev, &dev_attr_pm);
-	/* Current OCP device additions attributes */
-	if (odev->def->additions && odev->def->show)
-		odev->def->show(dev);
-}
-
-/**
- *	ocp_device_match	-	Match one driver to one device
- *	@drv: driver to match
- *	@dev: device to match
- *
- *	This function returns 0 if the driver and device don't match
- */
-static int
-ocp_device_match(struct device *dev, struct device_driver *drv)
-{
-	struct ocp_device *ocp_dev = to_ocp_dev(dev);
-	struct ocp_driver *ocp_drv = to_ocp_drv(drv);
-	const struct ocp_device_id *ids = ocp_drv->id_table;
-
-	if (!ids)
-		return 0;
-
-	while (ids->vendor || ids->function) {
-		if ((ids->vendor == OCP_ANY_ID
-		     || ids->vendor == ocp_dev->def->vendor)
-		    && (ids->function == OCP_ANY_ID
-			|| ids->function == ocp_dev->def->function))
-		        return 1;
-		ids++;
-	}
-	return 0;
-}
-
-static int
-ocp_device_probe(struct device *dev)
-{
-	int error = 0;
-	struct ocp_driver *drv;
-	struct ocp_device *ocp_dev;
-
-	drv = to_ocp_drv(dev->driver);
-	ocp_dev = to_ocp_dev(dev);
-
-	if (drv->probe) {
-		error = drv->probe(ocp_dev);
-		if (error >= 0) {
-			ocp_dev->driver = drv;
-			error = 0;
-		}
-	}
-	return error;
-}
-
-static int
-ocp_device_remove(struct device *dev)
-{
-	struct ocp_device *ocp_dev = to_ocp_dev(dev);
-
-	if (ocp_dev->driver) {
-		if (ocp_dev->driver->remove)
-			ocp_dev->driver->remove(ocp_dev);
-		ocp_dev->driver = NULL;
-	}
-	return 0;
-}
-
-static int
-ocp_device_suspend(struct device *dev, pm_message_t state)
-{
-	struct ocp_device *ocp_dev = to_ocp_dev(dev);
-	struct ocp_driver *ocp_drv = to_ocp_drv(dev->driver);
-
-	if (dev->driver && ocp_drv->suspend)
-		return ocp_drv->suspend(ocp_dev, state);
-	return 0;
-}
-
-static int
-ocp_device_resume(struct device *dev)
-{
-	struct ocp_device *ocp_dev = to_ocp_dev(dev);
-	struct ocp_driver *ocp_drv = to_ocp_drv(dev->driver);
-
-	if (dev->driver && ocp_drv->resume)
-		return ocp_drv->resume(ocp_dev);
-	return 0;
-}
-
-struct bus_type ocp_bus_type = {
-	.name = "ocp",
-	.match = ocp_device_match,
-	.probe = ocp_device_probe,
-	.remove = ocp_device_remove,
-	.suspend = ocp_device_suspend,
-	.resume = ocp_device_resume,
-};
-
-/**
- *	ocp_register_driver	-	Register an OCP driver
- *	@drv: pointer to statically defined ocp_driver structure
- *
- *	The driver's probe() callback is called either recursively
- *	by this function or upon later call of ocp_driver_init
- *
- *	NOTE: Detection of devices is a 2 pass step on this implementation,
- *	hotswap isn't supported. First, all OCP devices are put in the device
- *	list, _then_ all drivers are probed on each match.
- */
-int
-ocp_register_driver(struct ocp_driver *drv)
-{
-	/* initialize common driver fields */
-	drv->driver.name = drv->name;
-	drv->driver.bus = &ocp_bus_type;
-
-	/* register with core */
-	return driver_register(&drv->driver);
-}
-
-/**
- *	ocp_unregister_driver	-	Unregister an OCP driver
- *	@drv: pointer to statically defined ocp_driver structure
- *
- *	The driver's remove() callback is called recursively
- *	by this function for any device already registered
- */
-void
-ocp_unregister_driver(struct ocp_driver *drv)
-{
-	DBG(("ocp: ocp_unregister_driver(%s)...\n", drv->name));
-
-	driver_unregister(&drv->driver);
-
-	DBG(("ocp: ocp_unregister_driver(%s)... done.\n", drv->name));
-}
-
-/* Core of ocp_find_device(). Caller must hold ocp_devices_sem */
-static struct ocp_device *
-__ocp_find_device(unsigned int vendor, unsigned int function, int index)
-{
-	struct list_head	*entry;
-	struct ocp_device	*dev, *found = NULL;
-
-	DBG(("ocp: __ocp_find_device(vendor: %x, function: %x, index: %d)...\n", vendor, function, index));
-
-	list_for_each(entry, &ocp_devices) {
-		dev = list_entry(entry, struct ocp_device, link);
-		if (vendor != OCP_ANY_ID && vendor != dev->def->vendor)
-			continue;
-		if (function != OCP_ANY_ID && function != dev->def->function)
-			continue;
-		if (index != OCP_ANY_INDEX && index != dev->def->index)
-			continue;
-		found = dev;
-		break;
-	}
-
-	DBG(("ocp: __ocp_find_device(vendor: %x, function: %x, index: %d)... done\n", vendor, function, index));
-
-	return found;
-}
-
-/**
- *	ocp_find_device	-	Find a device by function & index
- *      @vendor: vendor ID of the device (or OCP_ANY_ID)
- *	@function: function code of the device (or OCP_ANY_ID)
- *	@idx: index of the device (or OCP_ANY_INDEX)
- *
- *	This function allows a lookup of a given function by it's
- *	index, it's typically used to find the MAL or ZMII associated
- *	with an EMAC or similar horrors.
- *      You can pass vendor, though you usually want OCP_ANY_ID there...
- */
-struct ocp_device *
-ocp_find_device(unsigned int vendor, unsigned int function, int index)
-{
-	struct ocp_device	*dev;
-
-	down_read(&ocp_devices_sem);
-	dev = __ocp_find_device(vendor, function, index);
-	up_read(&ocp_devices_sem);
-
-	return dev;
-}
-
-/**
- *	ocp_get_one_device -	Find a def by function & index
- *      @vendor: vendor ID of the device (or OCP_ANY_ID)
- *	@function: function code of the device (or OCP_ANY_ID)
- *	@idx: index of the device (or OCP_ANY_INDEX)
- *
- *	This function allows a lookup of a given ocp_def by it's
- *	vendor, function, and index.  The main purpose for is to
- *	allow modification of the def before binding to the driver
- */
-struct ocp_def *
-ocp_get_one_device(unsigned int vendor, unsigned int function, int index)
-{
-	struct ocp_device	*dev;
-	struct ocp_def		*found = NULL;
-
-	DBG(("ocp: ocp_get_one_device(vendor: %x, function: %x, index: %d)...\n",
-		vendor, function, index));
-
-	dev = ocp_find_device(vendor, function, index);
-
-	if (dev)
-		found = dev->def;
-
-	DBG(("ocp: ocp_get_one_device(vendor: %x, function: %x, index: %d)... done.\n",
-		vendor, function, index));
-
-	return found;
-}
-
-/**
- *	ocp_add_one_device	-	Add a device
- *	@def: static device definition structure
- *
- *	This function adds a device definition to the
- *	device list. It may only be called before
- *	ocp_driver_init() and will return an error
- *	otherwise.
- */
-int
-ocp_add_one_device(struct ocp_def *def)
-{
-	struct	ocp_device	*dev;
-
-	DBG(("ocp: ocp_add_one_device()...\n"));
-
-	/* Can't be called after ocp driver init */
-	if (ocp_inited)
-		return 1;
-
-	if (mem_init_done)
-		dev = kmalloc(sizeof(*dev), GFP_KERNEL);
-	else
-		dev = alloc_bootmem(sizeof(*dev));
-
-	if (dev == NULL)
-		return 1;
-	memset(dev, 0, sizeof(*dev));
-	dev->def = def;
-	dev->current_state = 4;
-	sprintf(dev->name, "OCP device %04x:%04x:%04x",
-		dev->def->vendor, dev->def->function, dev->def->index);
-	down_write(&ocp_devices_sem);
-	list_add_tail(&dev->link, &ocp_devices);
-	up_write(&ocp_devices_sem);
-
-	DBG(("ocp: ocp_add_one_device()...done\n"));
-
-	return 0;
-}
-
-/**
- *	ocp_remove_one_device -	Remove a device by function & index
- *      @vendor: vendor ID of the device (or OCP_ANY_ID)
- *	@function: function code of the device (or OCP_ANY_ID)
- *	@idx: index of the device (or OCP_ANY_INDEX)
- *
- *	This function allows removal of a given function by its
- *	index. It may only be called before ocp_driver_init()
- *	and will return an error otherwise.
- */
-int
-ocp_remove_one_device(unsigned int vendor, unsigned int function, int index)
-{
-	struct ocp_device *dev;
-
-	DBG(("ocp: ocp_remove_one_device(vendor: %x, function: %x, index: %d)...\n", vendor, function, index));
-
-	/* Can't be called after ocp driver init */
-	if (ocp_inited)
-		return 1;
-
-	down_write(&ocp_devices_sem);
-	dev = __ocp_find_device(vendor, function, index);
-	list_del(&dev->link);
-	up_write(&ocp_devices_sem);
-
-	DBG(("ocp: ocp_remove_one_device(vendor: %x, function: %x, index: %d)... done.\n", vendor, function, index));
-
-	return 0;
-}
-
-/**
- *	ocp_for_each_device	-	Iterate over OCP devices
- *	@callback: routine to execute for each ocp device.
- *	@arg: user data to be passed to callback routine.
- *
- *	This routine holds the ocp_device semaphore, so the
- *	callback routine cannot modify the ocp_device list.
- */
-void
-ocp_for_each_device(void(*callback)(struct ocp_device *, void *arg), void *arg)
-{
-	struct list_head *entry;
-
-	if (callback) {
-		down_read(&ocp_devices_sem);
-		list_for_each(entry, &ocp_devices)
-			callback(list_entry(entry, struct ocp_device, link),
-				arg);
-		up_read(&ocp_devices_sem);
-	}
-}
-
-/**
- *	ocp_early_init	-	Init OCP device management
- *
- *	This function builds the list of devices before setup_arch.
- *	This allows platform code to modify the device lists before
- *	they are bound to drivers (changes to paddr, removing devices
- *	etc)
- */
-int __init
-ocp_early_init(void)
-{
-	struct ocp_def	*def;
-
-	DBG(("ocp: ocp_early_init()...\n"));
-
-	/* Fill the devices list */
-	for (def = core_ocp; def->vendor != OCP_VENDOR_INVALID; def++)
-		ocp_add_one_device(def);
-
-	DBG(("ocp: ocp_early_init()... done.\n"));
-
-	return 0;
-}
-
-/**
- *	ocp_driver_init	-	Init OCP device management
- *
- *	This function is meant to be called via OCP bus registration.
- */
-static int __init
-ocp_driver_init(void)
-{
-	int ret = 0, index = 0;
-	struct device *ocp_bus;
-	struct list_head *entry;
-	struct ocp_device *dev;
-
-	if (ocp_inited)
-		return ret;
-	ocp_inited = 1;
-
-	DBG(("ocp: ocp_driver_init()...\n"));
-
-	/* Allocate/register primary OCP bus */
-	ocp_bus = kzalloc(sizeof(struct device), GFP_KERNEL);
-	if (ocp_bus == NULL)
-		return 1;
-	strcpy(ocp_bus->bus_id, "ocp");
-
-	bus_register(&ocp_bus_type);
-
-	device_register(ocp_bus);
-
-	/* Put each OCP device into global device list */
-	list_for_each(entry, &ocp_devices) {
-		dev = list_entry(entry, struct ocp_device, link);
-		sprintf(dev->dev.bus_id, "%2.2x", index);
-		dev->dev.parent = ocp_bus;
-		dev->dev.bus = &ocp_bus_type;
-		device_register(&dev->dev);
-		ocp_create_sysfs_dev_files(dev);
-		index++;
-	}
-
-	DBG(("ocp: ocp_driver_init()... done.\n"));
-
-	return 0;
-}
-
-postcore_initcall(ocp_driver_init);
-
-EXPORT_SYMBOL(ocp_bus_type);
-EXPORT_SYMBOL(ocp_find_device);
-EXPORT_SYMBOL(ocp_register_driver);
-EXPORT_SYMBOL(ocp_unregister_driver);
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
deleted file mode 100644
index 67dffe27b5c3..000000000000
--- a/arch/ppc/syslib/open_pic.c
+++ /dev/null
@@ -1,1087 +0,0 @@
-/*
- *  Copyright (C) 1997 Geert Uytterhoeven
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/signal.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/sections.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/machdep.h>
-
-#include "open_pic_defs.h"
-
-#if defined(CONFIG_PRPMC800)
-#define OPENPIC_BIG_ENDIAN
-#endif
-
-void __iomem *OpenPIC_Addr;
-static volatile struct OpenPIC __iomem *OpenPIC = NULL;
-
-/*
- * We define OpenPIC_InitSenses table thusly:
- * bit 0x1: sense, 0 for edge and 1 for level.
- * bit 0x2: polarity, 0 for negative, 1 for positive.
- */
-u_int OpenPIC_NumInitSenses __initdata = 0;
-u_char *OpenPIC_InitSenses __initdata = NULL;
-extern int use_of_interrupt_tree;
-
-static u_int NumProcessors;
-static u_int NumSources;
-static int open_pic_irq_offset;
-static volatile OpenPIC_Source __iomem *ISR[NR_IRQS];
-static int openpic_cascade_irq = -1;
-static int (*openpic_cascade_fn)(void);
-
-/* Global Operations */
-static void openpic_disable_8259_pass_through(void);
-static void openpic_set_spurious(u_int vector);
-
-#ifdef CONFIG_SMP
-/* Interprocessor Interrupts */
-static void openpic_initipi(u_int ipi, u_int pri, u_int vector);
-static irqreturn_t openpic_ipi_action(int cpl, void *dev_id);
-#endif
-
-/* Timer Interrupts */
-static void openpic_inittimer(u_int timer, u_int pri, u_int vector);
-static void openpic_maptimer(u_int timer, cpumask_t cpumask);
-
-/* Interrupt Sources */
-static void openpic_enable_irq(u_int irq);
-static void openpic_disable_irq(u_int irq);
-static void openpic_initirq(u_int irq, u_int pri, u_int vector, int polarity,
-			    int is_level);
-static void openpic_mapirq(u_int irq, cpumask_t cpumask, cpumask_t keepmask);
-
-/*
- * These functions are not used but the code is kept here
- * for completeness and future reference.
- */
-#ifdef notused
-static void openpic_enable_8259_pass_through(void);
-static u_int openpic_get_spurious(void);
-static void openpic_set_sense(u_int irq, int sense);
-#endif /* notused */
-
-/*
- * Description of the openpic for the higher-level irq code
- */
-static void openpic_end_irq(unsigned int irq_nr);
-static void openpic_ack_irq(unsigned int irq_nr);
-static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask);
-
-struct hw_interrupt_type open_pic = {
-	.typename	= " OpenPIC  ",
-	.enable		= openpic_enable_irq,
-	.disable	= openpic_disable_irq,
-	.ack		= openpic_ack_irq,
-	.end		= openpic_end_irq,
-	.set_affinity	= openpic_set_affinity,
-};
-
-#ifdef CONFIG_SMP
-static void openpic_end_ipi(unsigned int irq_nr);
-static void openpic_ack_ipi(unsigned int irq_nr);
-static void openpic_enable_ipi(unsigned int irq_nr);
-static void openpic_disable_ipi(unsigned int irq_nr);
-
-struct hw_interrupt_type open_pic_ipi = {
-	.typename	= " OpenPIC  ",
-	.enable		= openpic_enable_ipi,
-	.disable	= openpic_disable_ipi,
-	.ack		= openpic_ack_ipi,
-	.end		= openpic_end_ipi,
-};
-#endif /* CONFIG_SMP */
-
-/*
- *  Accesses to the current processor's openpic registers
- */
-#ifdef CONFIG_SMP
-#define THIS_CPU		Processor[cpu]
-#define DECL_THIS_CPU		int cpu = smp_hw_index[smp_processor_id()]
-#define CHECK_THIS_CPU		check_arg_cpu(cpu)
-#else
-#define THIS_CPU		Processor[0]
-#define DECL_THIS_CPU
-#define CHECK_THIS_CPU
-#endif /* CONFIG_SMP */
-
-#if 1
-#define check_arg_ipi(ipi) \
-    if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
-	printk("open_pic.c:%d: invalid ipi %d\n", __LINE__, ipi);
-#define check_arg_timer(timer) \
-    if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
-	printk("open_pic.c:%d: invalid timer %d\n", __LINE__, timer);
-#define check_arg_vec(vec) \
-    if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
-	printk("open_pic.c:%d: invalid vector %d\n", __LINE__, vec);
-#define check_arg_pri(pri) \
-    if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
-	printk("open_pic.c:%d: invalid priority %d\n", __LINE__, pri);
-/*
- * Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
- * data has probably been corrupted and we're going to panic or deadlock later
- * anyway --Troy
- */
-#define check_arg_irq(irq) \
-    if (irq < open_pic_irq_offset || irq >= NumSources+open_pic_irq_offset \
-	|| ISR[irq - open_pic_irq_offset] == 0) { \
-      printk("open_pic.c:%d: invalid irq %d\n", __LINE__, irq); \
-      dump_stack(); }
-#define check_arg_cpu(cpu) \
-    if (cpu < 0 || cpu >= NumProcessors){ \
-	printk("open_pic.c:%d: invalid cpu %d\n", __LINE__, cpu); \
-	dump_stack(); }
-#else
-#define check_arg_ipi(ipi)	do {} while (0)
-#define check_arg_timer(timer)	do {} while (0)
-#define check_arg_vec(vec)	do {} while (0)
-#define check_arg_pri(pri)	do {} while (0)
-#define check_arg_irq(irq)	do {} while (0)
-#define check_arg_cpu(cpu)	do {} while (0)
-#endif
-
-u_int openpic_read(volatile u_int __iomem *addr)
-{
-	u_int val;
-
-#ifdef OPENPIC_BIG_ENDIAN
-	val = in_be32(addr);
-#else
-	val = in_le32(addr);
-#endif
-	return val;
-}
-
-static inline void openpic_write(volatile u_int __iomem *addr, u_int val)
-{
-#ifdef OPENPIC_BIG_ENDIAN
-	out_be32(addr, val);
-#else
-	out_le32(addr, val);
-#endif
-}
-
-static inline u_int openpic_readfield(volatile u_int __iomem *addr, u_int mask)
-{
-	u_int val = openpic_read(addr);
-	return val & mask;
-}
-
-inline void openpic_writefield(volatile u_int __iomem *addr, u_int mask,
-			       u_int field)
-{
-	u_int val = openpic_read(addr);
-	openpic_write(addr, (val & ~mask) | (field & mask));
-}
-
-static inline void openpic_clearfield(volatile u_int __iomem *addr, u_int mask)
-{
-	openpic_writefield(addr, mask, 0);
-}
-
-static inline void openpic_setfield(volatile u_int __iomem *addr, u_int mask)
-{
-	openpic_writefield(addr, mask, mask);
-}
-
-static void openpic_safe_writefield(volatile u_int __iomem *addr, u_int mask,
-				    u_int field)
-{
-	openpic_setfield(addr, OPENPIC_MASK);
-	while (openpic_read(addr) & OPENPIC_ACTIVITY);
-	openpic_writefield(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
-}
-
-#ifdef CONFIG_SMP
-/* yes this is right ... bug, feature, you decide! -- tgall */
-u_int openpic_read_IPI(volatile u_int __iomem * addr)
-{
-         u_int val = 0;
-#if defined(OPENPIC_BIG_ENDIAN)
-        val = in_be32(addr);
-#else
-        val = in_le32(addr);
-#endif
-        return val;
-}
-
-/* because of the power3 be / le above, this is needed */
-inline void openpic_writefield_IPI(volatile u_int __iomem * addr, u_int mask, u_int field)
-{
-        u_int  val = openpic_read_IPI(addr);
-        openpic_write(addr, (val & ~mask) | (field & mask));
-}
-
-static inline void openpic_clearfield_IPI(volatile u_int __iomem *addr, u_int mask)
-{
-        openpic_writefield_IPI(addr, mask, 0);
-}
-
-static inline void openpic_setfield_IPI(volatile u_int __iomem *addr, u_int mask)
-{
-        openpic_writefield_IPI(addr, mask, mask);
-}
-
-static void openpic_safe_writefield_IPI(volatile u_int __iomem *addr, u_int mask, u_int field)
-{
-        openpic_setfield_IPI(addr, OPENPIC_MASK);
-
-        /* wait until it's not in use */
-        /* BenH: Is this code really enough ? I would rather check the result
-         *       and eventually retry ...
-         */
-        while(openpic_read_IPI(addr) & OPENPIC_ACTIVITY);
-
-        openpic_writefield_IPI(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
-}
-#endif /* CONFIG_SMP */
-
-#ifdef CONFIG_EPIC_SERIAL_MODE
-/* On platforms that may use EPIC serial mode, the default is enabled. */
-int epic_serial_mode = 1;
-
-static void __init openpic_eicr_set_clk(u_int clkval)
-{
-	openpic_writefield(&OpenPIC->Global.Global_Configuration1,
-			OPENPIC_EICR_S_CLK_MASK, (clkval << 28));
-}
-
-static void __init openpic_enable_sie(void)
-{
-	openpic_setfield(&OpenPIC->Global.Global_Configuration1,
-			OPENPIC_EICR_SIE);
-}
-#endif
-
-#if defined(CONFIG_EPIC_SERIAL_MODE)
-static void openpic_reset(void)
-{
-	openpic_setfield(&OpenPIC->Global.Global_Configuration0,
-			 OPENPIC_CONFIG_RESET);
-	while (openpic_readfield(&OpenPIC->Global.Global_Configuration0,
-				 OPENPIC_CONFIG_RESET))
-		mb();
-}
-#endif
-
-void __init openpic_set_sources(int first_irq, int num_irqs, void __iomem *first_ISR)
-{
-	volatile OpenPIC_Source __iomem *src = first_ISR;
-	int i, last_irq;
-
-	last_irq = first_irq + num_irqs;
-	if (last_irq > NumSources)
-		NumSources = last_irq;
-	if (src == 0)
-		src = &((struct OpenPIC __iomem *)OpenPIC_Addr)->Source[first_irq];
-	for (i = first_irq; i < last_irq; ++i, ++src)
-		ISR[i] = src;
-}
-
-/*
- * The `offset' parameter defines where the interrupts handled by the
- * OpenPIC start in the space of interrupt numbers that the kernel knows
- * about.  In other words, the OpenPIC's IRQ0 is numbered `offset' in the
- * kernel's interrupt numbering scheme.
- * We assume there is only one OpenPIC.
- */
-void __init openpic_init(int offset)
-{
-	u_int t, i;
-	u_int timerfreq;
-	const char *version;
-
-	if (!OpenPIC_Addr) {
-		printk("No OpenPIC found !\n");
-		return;
-	}
-	OpenPIC = (volatile struct OpenPIC __iomem *)OpenPIC_Addr;
-
-#ifdef CONFIG_EPIC_SERIAL_MODE
-	/* Have to start from ground zero.
-	*/
-	openpic_reset();
-#endif
-
-	if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122);
-
-	t = openpic_read(&OpenPIC->Global.Feature_Reporting0);
-	switch (t & OPENPIC_FEATURE_VERSION_MASK) {
-	case 1:
-		version = "1.0";
-		break;
-	case 2:
-		version = "1.2";
-		break;
-	case 3:
-		version = "1.3";
-		break;
-	default:
-		version = "?";
-		break;
-	}
-	NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >>
-			 OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1;
-	if (NumSources == 0)
-		openpic_set_sources(0,
-				    ((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >>
-				     OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1,
-				    NULL);
-	printk("OpenPIC Version %s (%d CPUs and %d IRQ sources) at %p\n",
-	       version, NumProcessors, NumSources, OpenPIC);
-	timerfreq = openpic_read(&OpenPIC->Global.Timer_Frequency);
-	if (timerfreq)
-		printk("OpenPIC timer frequency is %d.%06d MHz\n",
-		       timerfreq / 1000000, timerfreq % 1000000);
-
-	open_pic_irq_offset = offset;
-
-	/* Initialize timer interrupts */
-	if ( ppc_md.progress ) ppc_md.progress("openpic: timer",0x3ba);
-	for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
-		/* Disabled, Priority 0 */
-		openpic_inittimer(i, 0, OPENPIC_VEC_TIMER+i+offset);
-		/* No processor */
-		openpic_maptimer(i, CPU_MASK_NONE);
-	}
-
-#ifdef CONFIG_SMP
-	/* Initialize IPI interrupts */
-	if ( ppc_md.progress ) ppc_md.progress("openpic: ipi",0x3bb);
-	for (i = 0; i < OPENPIC_NUM_IPI; i++) {
-		/* Disabled, increased priorities 10..13 */
-		openpic_initipi(i, OPENPIC_PRIORITY_IPI_BASE+i,
-				OPENPIC_VEC_IPI+i+offset);
-		/* IPIs are per-CPU */
-		irq_desc[OPENPIC_VEC_IPI+i+offset].status |= IRQ_PER_CPU;
-		irq_desc[OPENPIC_VEC_IPI+i+offset].chip = &open_pic_ipi;
-	}
-#endif
-
-	/* Initialize external interrupts */
-	if (ppc_md.progress) ppc_md.progress("openpic: external",0x3bc);
-
-	openpic_set_priority(0xf);
-
-	/* Init all external sources, including possibly the cascade. */
-	for (i = 0; i < NumSources; i++) {
-		int sense;
-
-		if (ISR[i] == 0)
-			continue;
-
-		/* the bootloader may have left it enabled (bad !) */
-		openpic_disable_irq(i+offset);
-
-		sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
-				(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);
-
-		if (sense & IRQ_SENSE_MASK)
-			irq_desc[i+offset].status = IRQ_LEVEL;
-
-		/* Enabled, Default priority */
-		openpic_initirq(i, OPENPIC_PRIORITY_DEFAULT, i+offset,
-				(sense & IRQ_POLARITY_MASK),
-				(sense & IRQ_SENSE_MASK));
-		/* Processor 0 */
-		openpic_mapirq(i, CPU_MASK_CPU0, CPU_MASK_NONE);
-	}
-
-	/* Init descriptors */
-	for (i = offset; i < NumSources + offset; i++)
-		irq_desc[i].chip = &open_pic;
-
-	/* Initialize the spurious interrupt */
-	if (ppc_md.progress) ppc_md.progress("openpic: spurious",0x3bd);
-	openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
-	openpic_disable_8259_pass_through();
-#ifdef CONFIG_EPIC_SERIAL_MODE
-	if (epic_serial_mode) {
-		openpic_eicr_set_clk(7);	/* Slowest value until we know better */
-		openpic_enable_sie();
-	}
-#endif
-	openpic_set_priority(0);
-
-	if (ppc_md.progress) ppc_md.progress("openpic: exit",0x222);
-}
-
-#ifdef notused
-static void openpic_enable_8259_pass_through(void)
-{
-	openpic_clearfield(&OpenPIC->Global.Global_Configuration0,
-			   OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-#endif /* notused */
-
-static void openpic_disable_8259_pass_through(void)
-{
-	openpic_setfield(&OpenPIC->Global.Global_Configuration0,
-			 OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-
-/*
- *  Find out the current interrupt
- */
-u_int openpic_irq(void)
-{
-	u_int vec;
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	vec = openpic_readfield(&OpenPIC->THIS_CPU.Interrupt_Acknowledge,
-				OPENPIC_VECTOR_MASK);
-	return vec;
-}
-
-void openpic_eoi(void)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	openpic_write(&OpenPIC->THIS_CPU.EOI, 0);
-	/* Handle PCI write posting */
-	(void)openpic_read(&OpenPIC->THIS_CPU.EOI);
-}
-
-u_int openpic_get_priority(void)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	return openpic_readfield(&OpenPIC->THIS_CPU.Current_Task_Priority,
-				 OPENPIC_CURRENT_TASK_PRIORITY_MASK);
-}
-
-void openpic_set_priority(u_int pri)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	check_arg_pri(pri);
-	openpic_writefield(&OpenPIC->THIS_CPU.Current_Task_Priority,
-			   OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri);
-}
-
-/*
- *  Get/set the spurious vector
- */
-#ifdef notused
-static u_int openpic_get_spurious(void)
-{
-	return openpic_readfield(&OpenPIC->Global.Spurious_Vector,
-				 OPENPIC_VECTOR_MASK);
-}
-#endif /* notused */
-
-static void openpic_set_spurious(u_int vec)
-{
-	check_arg_vec(vec);
-	openpic_writefield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK,
-			   vec);
-}
-
-#ifdef CONFIG_SMP
-/*
- * Convert a cpu mask from logical to physical cpu numbers.
- */
-static inline cpumask_t physmask(cpumask_t cpumask)
-{
-	int i;
-	cpumask_t mask = CPU_MASK_NONE;
-
-	cpus_and(cpumask, cpu_online_map, cpumask);
-
-	for (i = 0; i < NR_CPUS; i++)
-		if (cpu_isset(i, cpumask))
-			cpu_set(smp_hw_index[i], mask);
-
-	return mask;
-}
-#else
-#define physmask(cpumask)	(cpumask)
-#endif
-
-void openpic_reset_processor_phys(u_int mask)
-{
-	openpic_write(&OpenPIC->Global.Processor_Initialization, mask);
-}
-
-#if defined(CONFIG_SMP) || defined(CONFIG_PM)
-static DEFINE_SPINLOCK(openpic_setup_lock);
-#endif
-
-#ifdef CONFIG_SMP
-/*
- *  Initialize an interprocessor interrupt (and disable it)
- *
- *  ipi: OpenPIC interprocessor interrupt number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- */
-static void __init openpic_initipi(u_int ipi, u_int pri, u_int vec)
-{
-	check_arg_ipi(ipi);
-	check_arg_pri(pri);
-	check_arg_vec(vec);
-	openpic_safe_writefield_IPI(&OpenPIC->Global.IPI_Vector_Priority(ipi),
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
-}
-
-/*
- *  Send an IPI to one or more CPUs
- *
- *  Externally called, however, it takes an IPI number (0...OPENPIC_NUM_IPI)
- *  and not a system-wide interrupt number
- */
-void openpic_cause_IPI(u_int ipi, cpumask_t cpumask)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	check_arg_ipi(ipi);
-	openpic_write(&OpenPIC->THIS_CPU.IPI_Dispatch(ipi),
-		      cpus_addr(physmask(cpumask))[0]);
-}
-
-void openpic_request_IPIs(void)
-{
-	int i;
-
-	/*
-	 * Make sure this matches what is defined in smp.c for
-	 * smp_message_{pass|recv}() or what shows up in
-	 * /proc/interrupts will be wrong!!! --Troy */
-
-	if (OpenPIC == NULL)
-		return;
-
-	/*
- 	 * IPIs are marked IRQF_DISABLED as they must run with irqs
-	 * disabled
-	 */
-	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset,
-		    openpic_ipi_action, IRQF_DISABLED,
-		    "IPI0 (call function)", NULL);
-	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+1,
-		    openpic_ipi_action, IRQF_DISABLED,
-		    "IPI1 (reschedule)", NULL);
-	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+2,
-		    openpic_ipi_action, IRQF_DISABLED,
-		    "IPI2 (invalidate tlb)", NULL);
-	request_irq(OPENPIC_VEC_IPI+open_pic_irq_offset+3,
-		    openpic_ipi_action, IRQF_DISABLED,
-		    "IPI3 (xmon break)", NULL);
-
-	for ( i = 0; i < OPENPIC_NUM_IPI ; i++ )
-		openpic_enable_ipi(OPENPIC_VEC_IPI+open_pic_irq_offset+i);
-}
-
-/*
- * Do per-cpu setup for SMP systems.
- *
- * Get IPI's working and start taking interrupts.
- *   -- Cort
- */
-
-void __devinit do_openpic_setup_cpu(void)
-{
-#ifdef CONFIG_IRQ_ALL_CPUS
- 	int i;
-	cpumask_t msk = CPU_MASK_NONE;
-#endif
-	spin_lock(&openpic_setup_lock);
-
-#ifdef CONFIG_IRQ_ALL_CPUS
-	cpu_set(smp_hw_index[smp_processor_id()], msk);
-
- 	/* let the openpic know we want intrs. default affinity
- 	 * is 0xffffffff until changed via /proc
- 	 * That's how it's done on x86. If we want it differently, then
- 	 * we should make sure we also change the default values of
-	 * irq_desc[].affinity in irq.c.
- 	 */
- 	for (i = 0; i < NumSources; i++)
-		openpic_mapirq(i, msk, CPU_MASK_ALL);
-#endif /* CONFIG_IRQ_ALL_CPUS */
- 	openpic_set_priority(0);
-
-	spin_unlock(&openpic_setup_lock);
-}
-#endif /* CONFIG_SMP */
-
-/*
- *  Initialize a timer interrupt (and disable it)
- *
- *  timer: OpenPIC timer number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- */
-static void __init openpic_inittimer(u_int timer, u_int pri, u_int vec)
-{
-	check_arg_timer(timer);
-	check_arg_pri(pri);
-	check_arg_vec(vec);
-	openpic_safe_writefield(&OpenPIC->Global.Timer[timer].Vector_Priority,
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
-}
-
-/*
- *  Map a timer interrupt to one or more CPUs
- */
-static void __init openpic_maptimer(u_int timer, cpumask_t cpumask)
-{
-	cpumask_t phys = physmask(cpumask);
-	check_arg_timer(timer);
-	openpic_write(&OpenPIC->Global.Timer[timer].Destination,
-		      cpus_addr(phys)[0]);
-}
-
-/*
- * Change the priority of an interrupt
- */
-void __init
-openpic_set_irq_priority(u_int irq, u_int pri)
-{
-	check_arg_irq(irq);
-	openpic_safe_writefield(&ISR[irq - open_pic_irq_offset]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK,
-				pri << OPENPIC_PRIORITY_SHIFT);
-}
-
-/*
- * Initalize the interrupt source which will generate an NMI.
- * This raises the interrupt's priority from 8 to 9.
- *
- * irq: The logical IRQ which generates an NMI.
- */
-void __init
-openpic_init_nmi_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	openpic_set_irq_priority(irq, OPENPIC_PRIORITY_NMI);
-}
-
-/*
- *
- * All functions below take an offset'ed irq argument
- *
- */
-
-/*
- * Hookup a cascade to the OpenPIC.
- */
-
-static struct irqaction openpic_cascade_irqaction = {
-	.handler = no_action,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-};
-
-void __init
-openpic_hookup_cascade(u_int irq, char *name,
-	int (*cascade_fn)(void))
-{
-	openpic_cascade_irq = irq;
-	openpic_cascade_fn = cascade_fn;
-
-	if (setup_irq(irq, &openpic_cascade_irqaction))
-		printk("Unable to get OpenPIC IRQ %d for cascade\n",
-				irq - open_pic_irq_offset);
-}
-
-/*
- *  Enable/disable an external interrupt source
- *
- *  Externally called, irq is an offseted system-wide interrupt number
- */
-static void openpic_enable_irq(u_int irq)
-{
-	volatile u_int __iomem *vpp;
-
-	check_arg_irq(irq);
-	vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
-	openpic_clearfield(vpp, OPENPIC_MASK);
-	/* make sure mask gets to controller before we return to user */
-	do {
-		mb(); /* sync is probably useless here */
-	} while (openpic_readfield(vpp, OPENPIC_MASK));
-}
-
-static void openpic_disable_irq(u_int irq)
-{
-	volatile u_int __iomem *vpp;
-	u32 vp;
-
-	check_arg_irq(irq);
-	vpp = &ISR[irq - open_pic_irq_offset]->Vector_Priority;
-	openpic_setfield(vpp, OPENPIC_MASK);
-	/* make sure mask gets to controller before we return to user */
-	do {
-		mb();  /* sync is probably useless here */
-		vp = openpic_readfield(vpp, OPENPIC_MASK | OPENPIC_ACTIVITY);
-	} while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK));
-}
-
-#ifdef CONFIG_SMP
-/*
- *  Enable/disable an IPI interrupt source
- *
- *  Externally called, irq is an offseted system-wide interrupt number
- */
-void openpic_enable_ipi(u_int irq)
-{
-	irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
-	check_arg_ipi(irq);
-	openpic_clearfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
-
-}
-
-void openpic_disable_ipi(u_int irq)
-{
-	irq -= (OPENPIC_VEC_IPI+open_pic_irq_offset);
-	check_arg_ipi(irq);
-	openpic_setfield_IPI(&OpenPIC->Global.IPI_Vector_Priority(irq), OPENPIC_MASK);
-}
-#endif
-
-/*
- *  Initialize an interrupt source (and disable it!)
- *
- *  irq: OpenPIC interrupt number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- *  pol: polarity (1 for positive, 0 for negative)
- *  sense: 1 for level, 0 for edge
- */
-static void __init
-openpic_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
-{
-	openpic_safe_writefield(&ISR[irq]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
-				OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec |
-				(pol ? OPENPIC_POLARITY_POSITIVE :
-			    		OPENPIC_POLARITY_NEGATIVE) |
-				(sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE));
-}
-
-/*
- *  Map an interrupt source to one or more CPUs
- */
-static void openpic_mapirq(u_int irq, cpumask_t physmask, cpumask_t keepmask)
-{
-	if (ISR[irq] == 0)
-		return;
-	if (!cpus_empty(keepmask)) {
-		cpumask_t irqdest = { .bits[0] = openpic_read(&ISR[irq]->Destination) };
-		cpus_and(irqdest, irqdest, keepmask);
-		cpus_or(physmask, physmask, irqdest);
-	}
-	openpic_write(&ISR[irq]->Destination, cpus_addr(physmask)[0]);
-}
-
-#ifdef notused
-/*
- *  Set the sense for an interrupt source (and disable it!)
- *
- *  sense: 1 for level, 0 for edge
- */
-static void openpic_set_sense(u_int irq, int sense)
-{
-	if (ISR[irq] != 0)
-		openpic_safe_writefield(&ISR[irq]->Vector_Priority,
-					OPENPIC_SENSE_LEVEL,
-					(sense ? OPENPIC_SENSE_LEVEL : 0));
-}
-#endif /* notused */
-
-/* No spinlocks, should not be necessary with the OpenPIC
- * (1 register = 1 interrupt and we have the desc lock).
- */
-static void openpic_ack_irq(unsigned int irq_nr)
-{
-#ifdef __SLOW_VERSION__
-	openpic_disable_irq(irq_nr);
-	openpic_eoi();
-#else
-	if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0)
-		openpic_eoi();
-#endif
-}
-
-static void openpic_end_irq(unsigned int irq_nr)
-{
-#ifdef __SLOW_VERSION__
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-	    && irq_desc[irq_nr].action)
-		openpic_enable_irq(irq_nr);
-#else
-	if ((irq_desc[irq_nr].status & IRQ_LEVEL) != 0)
-		openpic_eoi();
-#endif
-}
-
-static void openpic_set_affinity(unsigned int irq_nr, cpumask_t cpumask)
-{
-	openpic_mapirq(irq_nr - open_pic_irq_offset, physmask(cpumask), CPU_MASK_NONE);
-}
-
-#ifdef CONFIG_SMP
-static void openpic_ack_ipi(unsigned int irq_nr)
-{
-	openpic_eoi();
-}
-
-static void openpic_end_ipi(unsigned int irq_nr)
-{
-}
-
-static irqreturn_t openpic_ipi_action(int cpl, void *dev_id)
-{
-	smp_message_recv(cpl-OPENPIC_VEC_IPI-open_pic_irq_offset);
-	return IRQ_HANDLED;
-}
-
-#endif /* CONFIG_SMP */
-
-int
-openpic_get_irq(void)
-{
-	int irq = openpic_irq();
-
-	/*
-	 * Check for the cascade interrupt and call the cascaded
-	 * interrupt controller function (usually i8259_irq) if so.
-	 * This should move to irq.c eventually.  -- paulus
-	 */
-	if (irq == openpic_cascade_irq && openpic_cascade_fn != NULL) {
-		int cirq = openpic_cascade_fn();
-
-		/* Allow for the cascade being shared with other devices */
-		if (cirq != -1) {
-			irq = cirq;
-			openpic_eoi();
-		}
-	} else if (irq == OPENPIC_VEC_SPURIOUS)
-		irq = -1;
-	return irq;
-}
-
-#ifdef CONFIG_SMP
-void
-smp_openpic_message_pass(int target, int msg)
-{
-	cpumask_t mask = CPU_MASK_ALL;
-	/* make sure we're sending something that translates to an IPI */
-	if (msg > 0x3) {
-		printk("SMP %d: smp_message_pass: unknown msg %d\n",
-		       smp_processor_id(), msg);
-		return;
-	}
-	switch (target) {
-	case MSG_ALL:
-		openpic_cause_IPI(msg, mask);
-		break;
-	case MSG_ALL_BUT_SELF:
-		cpu_clear(smp_processor_id(), mask);
-		openpic_cause_IPI(msg, mask);
-		break;
-	default:
-		openpic_cause_IPI(msg, cpumask_of_cpu(target));
-		break;
-	}
-}
-#endif /* CONFIG_SMP */
-
-#ifdef CONFIG_PM
-
-/*
- * We implement the IRQ controller as a sysdev and put it
- * to sleep at powerdown stage (the callback is named suspend,
- * but it's old semantics, for the Device Model, it's really
- * powerdown). The possible problem is that another sysdev that
- * happens to be suspend after this one will have interrupts off,
- * that may be an issue... For now, this isn't an issue on pmac
- * though...
- */
-
-static u32 save_ipi_vp[OPENPIC_NUM_IPI];
-static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES];
-static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES];
-static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS];
-static int openpic_suspend_count;
-
-static void openpic_cached_enable_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	save_irq_src_vp[irq - open_pic_irq_offset] &= ~OPENPIC_MASK;
-}
-
-static void openpic_cached_disable_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	save_irq_src_vp[irq - open_pic_irq_offset] |= OPENPIC_MASK;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic_suspend(struct sys_device *sysdev, pm_message_t state)
-{
-	int	i;
-	unsigned long flags;
-
-	spin_lock_irqsave(&openpic_setup_lock, flags);
-
-	if (openpic_suspend_count++ > 0) {
-		spin_unlock_irqrestore(&openpic_setup_lock, flags);
-		return 0;
-	}
-
- 	openpic_set_priority(0xf);
-
-	open_pic.enable = openpic_cached_enable_irq;
-	open_pic.disable = openpic_cached_disable_irq;
-
-	for (i=0; i<NumProcessors; i++) {
-		save_cpu_task_pri[i] = openpic_read(&OpenPIC->Processor[i].Current_Task_Priority);
-		openpic_writefield(&OpenPIC->Processor[i].Current_Task_Priority,
-				   OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf);
-	}
-
-	for (i=0; i<OPENPIC_NUM_IPI; i++)
-		save_ipi_vp[i] = openpic_read(&OpenPIC->Global.IPI_Vector_Priority(i));
-	for (i=0; i<NumSources; i++) {
-		if (ISR[i] == 0)
-			continue;
-		save_irq_src_vp[i] = openpic_read(&ISR[i]->Vector_Priority) & ~OPENPIC_ACTIVITY;
-		save_irq_src_dest[i] = openpic_read(&ISR[i]->Destination);
-	}
-
-	spin_unlock_irqrestore(&openpic_setup_lock, flags);
-
-	return 0;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic_resume(struct sys_device *sysdev)
-{
-	int		i;
-	unsigned long	flags;
-	u32		vppmask =	OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
-					OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK |
-					OPENPIC_MASK;
-
-	spin_lock_irqsave(&openpic_setup_lock, flags);
-
-	if ((--openpic_suspend_count) > 0) {
-		spin_unlock_irqrestore(&openpic_setup_lock, flags);
-		return 0;
-	}
-
-	/* OpenPIC sometimes seem to need some time to be fully back up... */
-	do {
-		openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
-	} while(openpic_readfield(&OpenPIC->Global.Spurious_Vector, OPENPIC_VECTOR_MASK)
-			!= OPENPIC_VEC_SPURIOUS);
-	
-	openpic_disable_8259_pass_through();
-
-	for (i=0; i<OPENPIC_NUM_IPI; i++)
-		openpic_write(&OpenPIC->Global.IPI_Vector_Priority(i),
-			      save_ipi_vp[i]);
-	for (i=0; i<NumSources; i++) {
-		if (ISR[i] == 0)
-			continue;
-		openpic_write(&ISR[i]->Destination, save_irq_src_dest[i]);
-		openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
-		/* make sure mask gets to controller before we return to user */
-		do {
-			openpic_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
-		} while (openpic_readfield(&ISR[i]->Vector_Priority, vppmask)
-			 != (save_irq_src_vp[i] & vppmask));
-	}
-	for (i=0; i<NumProcessors; i++)
-		openpic_write(&OpenPIC->Processor[i].Current_Task_Priority,
-			      save_cpu_task_pri[i]);
-
-	open_pic.enable = openpic_enable_irq;
-	open_pic.disable = openpic_disable_irq;
-
- 	openpic_set_priority(0);
-
-	spin_unlock_irqrestore(&openpic_setup_lock, flags);
-
-	return 0;
-}
-
-#endif /* CONFIG_PM */
-
-static struct sysdev_class openpic_sysclass = {
-	.name = "openpic",
-};
-
-static struct sys_device device_openpic = {
-	.id		= 0,
-	.cls		= &openpic_sysclass,
-};
-
-static struct sysdev_driver driver_openpic = {
-#ifdef CONFIG_PM
-	.suspend	= &openpic_suspend,
-	.resume		= &openpic_resume,
-#endif /* CONFIG_PM */
-};
-
-static int __init init_openpic_sysfs(void)
-{
-	int rc;
-
-	if (!OpenPIC_Addr)
-		return -ENODEV;
-	printk(KERN_DEBUG "Registering openpic with sysfs...\n");
-	rc = sysdev_class_register(&openpic_sysclass);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys class\n");
-		return -ENODEV;
-	}
-	rc = sysdev_register(&device_openpic);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys device\n");
-		return -ENODEV;
-	}
-	rc = sysdev_driver_register(&openpic_sysclass, &driver_openpic);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys driver\n");
-		return -ENODEV;
-	}
-	return 0;
-}
-
-subsys_initcall(init_openpic_sysfs);
-
diff --git a/arch/ppc/syslib/open_pic2.c b/arch/ppc/syslib/open_pic2.c
deleted file mode 100644
index 449075a04798..000000000000
--- a/arch/ppc/syslib/open_pic2.c
+++ /dev/null
@@ -1,710 +0,0 @@
-/*
- *  Copyright (C) 1997 Geert Uytterhoeven
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- *
- *  This is a duplicate of open_pic.c that deals with U3s MPIC on
- *  G5 PowerMacs. It's the same file except it's using big endian
- *  register accesses
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/sysdev.h>
-#include <linux/errno.h>
-#include <asm/ptrace.h>
-#include <asm/signal.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/sections.h>
-#include <asm/open_pic.h>
-#include <asm/i8259.h>
-#include <asm/machdep.h>
-
-#include "open_pic_defs.h"
-
-void *OpenPIC2_Addr;
-static volatile struct OpenPIC *OpenPIC2 = NULL;
-/*
- * We define OpenPIC_InitSenses table thusly:
- * bit 0x1: sense, 0 for edge and 1 for level.
- * bit 0x2: polarity, 0 for negative, 1 for positive.
- */
-extern  u_int OpenPIC_NumInitSenses;
-extern u_char *OpenPIC_InitSenses;
-extern int use_of_interrupt_tree;
-
-static u_int NumProcessors;
-static u_int NumSources;
-static int open_pic2_irq_offset;
-static volatile OpenPIC_Source *ISR[NR_IRQS];
-
-/* Global Operations */
-static void openpic2_disable_8259_pass_through(void);
-static void openpic2_set_priority(u_int pri);
-static void openpic2_set_spurious(u_int vector);
-
-/* Timer Interrupts */
-static void openpic2_inittimer(u_int timer, u_int pri, u_int vector);
-static void openpic2_maptimer(u_int timer, u_int cpumask);
-
-/* Interrupt Sources */
-static void openpic2_enable_irq(u_int irq);
-static void openpic2_disable_irq(u_int irq);
-static void openpic2_initirq(u_int irq, u_int pri, u_int vector, int polarity,
-			    int is_level);
-static void openpic2_mapirq(u_int irq, u_int cpumask, u_int keepmask);
-
-/*
- * These functions are not used but the code is kept here
- * for completeness and future reference.
- */
-static void openpic2_reset(void);
-#ifdef notused
-static void openpic2_enable_8259_pass_through(void);
-static u_int openpic2_get_priority(void);
-static u_int openpic2_get_spurious(void);
-static void openpic2_set_sense(u_int irq, int sense);
-#endif /* notused */
-
-/*
- * Description of the openpic for the higher-level irq code
- */
-static void openpic2_end_irq(unsigned int irq_nr);
-static void openpic2_ack_irq(unsigned int irq_nr);
-
-struct hw_interrupt_type open_pic2 = {
-	.typename = " OpenPIC2 ",
-	.enable = openpic2_enable_irq,
-	.disable = openpic2_disable_irq,
-	.ack = openpic2_ack_irq,
-	.end = openpic2_end_irq,
-};
-
-/*
- *  Accesses to the current processor's openpic registers
- *  On cascaded controller, this is only CPU 0
- */
-#define THIS_CPU		Processor[0]
-#define DECL_THIS_CPU
-#define CHECK_THIS_CPU
-
-#if 1
-#define check_arg_ipi(ipi) \
-    if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
-	printk("open_pic.c:%d: illegal ipi %d\n", __LINE__, ipi);
-#define check_arg_timer(timer) \
-    if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
-	printk("open_pic.c:%d: illegal timer %d\n", __LINE__, timer);
-#define check_arg_vec(vec) \
-    if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
-	printk("open_pic.c:%d: illegal vector %d\n", __LINE__, vec);
-#define check_arg_pri(pri) \
-    if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
-	printk("open_pic.c:%d: illegal priority %d\n", __LINE__, pri);
-/*
- * Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
- * data has probably been corrupted and we're going to panic or deadlock later
- * anyway --Troy
- */
-extern unsigned long* _get_SP(void);
-#define check_arg_irq(irq) \
-    if (irq < open_pic2_irq_offset || irq >= NumSources+open_pic2_irq_offset \
-	|| ISR[irq - open_pic2_irq_offset] == 0) { \
-      printk("open_pic.c:%d: illegal irq %d\n", __LINE__, irq); \
-      /*print_backtrace(_get_SP());*/ }
-#define check_arg_cpu(cpu) \
-    if (cpu < 0 || cpu >= NumProcessors){ \
-	printk("open_pic2.c:%d: illegal cpu %d\n", __LINE__, cpu); \
-	/*print_backtrace(_get_SP());*/ }
-#else
-#define check_arg_ipi(ipi)	do {} while (0)
-#define check_arg_timer(timer)	do {} while (0)
-#define check_arg_vec(vec)	do {} while (0)
-#define check_arg_pri(pri)	do {} while (0)
-#define check_arg_irq(irq)	do {} while (0)
-#define check_arg_cpu(cpu)	do {} while (0)
-#endif
-
-static u_int openpic2_read(volatile u_int *addr)
-{
-	u_int val;
-
-	val = in_be32(addr);
-	return val;
-}
-
-static inline void openpic2_write(volatile u_int *addr, u_int val)
-{
-	out_be32(addr, val);
-}
-
-static inline u_int openpic2_readfield(volatile u_int *addr, u_int mask)
-{
-	u_int val = openpic2_read(addr);
-	return val & mask;
-}
-
-inline void openpic2_writefield(volatile u_int *addr, u_int mask,
-			       u_int field)
-{
-	u_int val = openpic2_read(addr);
-	openpic2_write(addr, (val & ~mask) | (field & mask));
-}
-
-static inline void openpic2_clearfield(volatile u_int *addr, u_int mask)
-{
-	openpic2_writefield(addr, mask, 0);
-}
-
-static inline void openpic2_setfield(volatile u_int *addr, u_int mask)
-{
-	openpic2_writefield(addr, mask, mask);
-}
-
-static void openpic2_safe_writefield(volatile u_int *addr, u_int mask,
-				    u_int field)
-{
-	openpic2_setfield(addr, OPENPIC_MASK);
-	while (openpic2_read(addr) & OPENPIC_ACTIVITY);
-	openpic2_writefield(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
-}
-
-static void openpic2_reset(void)
-{
-	openpic2_setfield(&OpenPIC2->Global.Global_Configuration0,
-			 OPENPIC_CONFIG_RESET);
-	while (openpic2_readfield(&OpenPIC2->Global.Global_Configuration0,
-				 OPENPIC_CONFIG_RESET))
-		mb();
-}
-
-void __init openpic2_set_sources(int first_irq, int num_irqs, void *first_ISR)
-{
-	volatile OpenPIC_Source *src = first_ISR;
-	int i, last_irq;
-
-	last_irq = first_irq + num_irqs;
-	if (last_irq > NumSources)
-		NumSources = last_irq;
-	if (src == 0)
-		src = &((struct OpenPIC *)OpenPIC2_Addr)->Source[first_irq];
-	for (i = first_irq; i < last_irq; ++i, ++src)
-		ISR[i] = src;
-}
-
-/*
- * The `offset' parameter defines where the interrupts handled by the
- * OpenPIC start in the space of interrupt numbers that the kernel knows
- * about.  In other words, the OpenPIC's IRQ0 is numbered `offset' in the
- * kernel's interrupt numbering scheme.
- * We assume there is only one OpenPIC.
- */
-void __init openpic2_init(int offset)
-{
-	u_int t, i;
-	u_int timerfreq;
-	const char *version;
-
-	if (!OpenPIC2_Addr) {
-		printk("No OpenPIC2 found !\n");
-		return;
-	}
-	OpenPIC2 = (volatile struct OpenPIC *)OpenPIC2_Addr;
-
-	if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122);
-
-	t = openpic2_read(&OpenPIC2->Global.Feature_Reporting0);
-	switch (t & OPENPIC_FEATURE_VERSION_MASK) {
-	case 1:
-		version = "1.0";
-		break;
-	case 2:
-		version = "1.2";
-		break;
-	case 3:
-		version = "1.3";
-		break;
-	default:
-		version = "?";
-		break;
-	}
-	NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >>
-			 OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1;
-	if (NumSources == 0)
-		openpic2_set_sources(0,
-				    ((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >>
-				     OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1,
-				    NULL);
-	printk("OpenPIC (2) Version %s (%d CPUs and %d IRQ sources) at %p\n",
-	       version, NumProcessors, NumSources, OpenPIC2);
-	timerfreq = openpic2_read(&OpenPIC2->Global.Timer_Frequency);
-	if (timerfreq)
-		printk("OpenPIC timer frequency is %d.%06d MHz\n",
-		       timerfreq / 1000000, timerfreq % 1000000);
-
-	open_pic2_irq_offset = offset;
-
-	/* Initialize timer interrupts */
-	if ( ppc_md.progress ) ppc_md.progress("openpic2: timer",0x3ba);
-	for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
-		/* Disabled, Priority 0 */
-		openpic2_inittimer(i, 0, OPENPIC2_VEC_TIMER+i+offset);
-		/* No processor */
-		openpic2_maptimer(i, 0);
-	}
-
-	/* Initialize external interrupts */
-	if (ppc_md.progress) ppc_md.progress("openpic2: external",0x3bc);
-
-	openpic2_set_priority(0xf);
-
-	/* Init all external sources, including possibly the cascade. */
-	for (i = 0; i < NumSources; i++) {
-		int sense;
-
-		if (ISR[i] == 0)
-			continue;
-
-		/* the bootloader may have left it enabled (bad !) */
-		openpic2_disable_irq(i+offset);
-
-		sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
-				(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);
-
-		if (sense & IRQ_SENSE_MASK)
-			irq_desc[i+offset].status = IRQ_LEVEL;
-
-		/* Enabled, Priority 8 */
-		openpic2_initirq(i, 8, i+offset, (sense & IRQ_POLARITY_MASK),
-				(sense & IRQ_SENSE_MASK));
-		/* Processor 0 */
-		openpic2_mapirq(i, 1<<0, 0);
-	}
-
-	/* Init descriptors */
-	for (i = offset; i < NumSources + offset; i++)
-		irq_desc[i].chip = &open_pic2;
-
-	/* Initialize the spurious interrupt */
-	if (ppc_md.progress) ppc_md.progress("openpic2: spurious",0x3bd);
-	openpic2_set_spurious(OPENPIC2_VEC_SPURIOUS+offset);
-
-	openpic2_disable_8259_pass_through();
-	openpic2_set_priority(0);
-
-	if (ppc_md.progress) ppc_md.progress("openpic2: exit",0x222);
-}
-
-#ifdef notused
-static void openpic2_enable_8259_pass_through(void)
-{
-	openpic2_clearfield(&OpenPIC2->Global.Global_Configuration0,
-			   OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-#endif /* notused */
-
-/* This can't be __init, it is used in openpic_sleep_restore_intrs */
-static void openpic2_disable_8259_pass_through(void)
-{
-	openpic2_setfield(&OpenPIC2->Global.Global_Configuration0,
-			 OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
-}
-
-/*
- *  Find out the current interrupt
- */
-u_int openpic2_irq(void)
-{
-	u_int vec;
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	vec = openpic2_readfield(&OpenPIC2->THIS_CPU.Interrupt_Acknowledge,
-				OPENPIC_VECTOR_MASK);
-	return vec;
-}
-
-void openpic2_eoi(void)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	openpic2_write(&OpenPIC2->THIS_CPU.EOI, 0);
-	/* Handle PCI write posting */
-	(void)openpic2_read(&OpenPIC2->THIS_CPU.EOI);
-}
-
-#ifdef notused
-static u_int openpic2_get_priority(void)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	return openpic2_readfield(&OpenPIC2->THIS_CPU.Current_Task_Priority,
-				 OPENPIC_CURRENT_TASK_PRIORITY_MASK);
-}
-#endif /* notused */
-
-static void __init openpic2_set_priority(u_int pri)
-{
-	DECL_THIS_CPU;
-
-	CHECK_THIS_CPU;
-	check_arg_pri(pri);
-	openpic2_writefield(&OpenPIC2->THIS_CPU.Current_Task_Priority,
-			   OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri);
-}
-
-/*
- *  Get/set the spurious vector
- */
-#ifdef notused
-static u_int openpic2_get_spurious(void)
-{
-	return openpic2_readfield(&OpenPIC2->Global.Spurious_Vector,
-				 OPENPIC_VECTOR_MASK);
-}
-#endif /* notused */
-
-/* This can't be __init, it is used in openpic_sleep_restore_intrs */
-static void openpic2_set_spurious(u_int vec)
-{
-	check_arg_vec(vec);
-	openpic2_writefield(&OpenPIC2->Global.Spurious_Vector, OPENPIC_VECTOR_MASK,
-			   vec);
-}
-
-static DEFINE_SPINLOCK(openpic2_setup_lock);
-
-/*
- *  Initialize a timer interrupt (and disable it)
- *
- *  timer: OpenPIC timer number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- */
-static void __init openpic2_inittimer(u_int timer, u_int pri, u_int vec)
-{
-	check_arg_timer(timer);
-	check_arg_pri(pri);
-	check_arg_vec(vec);
-	openpic2_safe_writefield(&OpenPIC2->Global.Timer[timer].Vector_Priority,
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
-}
-
-/*
- *  Map a timer interrupt to one or more CPUs
- */
-static void __init openpic2_maptimer(u_int timer, u_int cpumask)
-{
-	check_arg_timer(timer);
-	openpic2_write(&OpenPIC2->Global.Timer[timer].Destination,
-		      cpumask);
-}
-
-/*
- * Initalize the interrupt source which will generate an NMI.
- * This raises the interrupt's priority from 8 to 9.
- *
- * irq: The logical IRQ which generates an NMI.
- */
-void __init
-openpic2_init_nmi_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	openpic2_safe_writefield(&ISR[irq - open_pic2_irq_offset]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK,
-				9 << OPENPIC_PRIORITY_SHIFT);
-}
-
-/*
- *
- * All functions below take an offset'ed irq argument
- *
- */
-
-
-/*
- *  Enable/disable an external interrupt source
- *
- *  Externally called, irq is an offseted system-wide interrupt number
- */
-static void openpic2_enable_irq(u_int irq)
-{
-	volatile u_int *vpp;
-
-	check_arg_irq(irq);
-	vpp = &ISR[irq - open_pic2_irq_offset]->Vector_Priority;
-       	openpic2_clearfield(vpp, OPENPIC_MASK);
-	/* make sure mask gets to controller before we return to user */
-       	do {
-       		mb(); /* sync is probably useless here */
-       	} while (openpic2_readfield(vpp, OPENPIC_MASK));
-}
-
-static void openpic2_disable_irq(u_int irq)
-{
-	volatile u_int *vpp;
-	u32 vp;
-
-	check_arg_irq(irq);
-	vpp = &ISR[irq - open_pic2_irq_offset]->Vector_Priority;
-	openpic2_setfield(vpp, OPENPIC_MASK);
-	/* make sure mask gets to controller before we return to user */
-	do {
-		mb();  /* sync is probably useless here */
-		vp = openpic2_readfield(vpp, OPENPIC_MASK | OPENPIC_ACTIVITY);
-	} while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK));
-}
-
-
-/*
- *  Initialize an interrupt source (and disable it!)
- *
- *  irq: OpenPIC interrupt number
- *  pri: interrupt source priority
- *  vec: the vector it will produce
- *  pol: polarity (1 for positive, 0 for negative)
- *  sense: 1 for level, 0 for edge
- */
-static void __init
-openpic2_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
-{
-	openpic2_safe_writefield(&ISR[irq]->Vector_Priority,
-				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
-				OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK,
-				(pri << OPENPIC_PRIORITY_SHIFT) | vec |
-				(pol ? OPENPIC_POLARITY_POSITIVE :
-			    		OPENPIC_POLARITY_NEGATIVE) |
-				(sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE));
-}
-
-/*
- *  Map an interrupt source to one or more CPUs
- */
-static void openpic2_mapirq(u_int irq, u_int physmask, u_int keepmask)
-{
-	if (ISR[irq] == 0)
-		return;
-	if (keepmask != 0)
-		physmask |= openpic2_read(&ISR[irq]->Destination) & keepmask;
-	openpic2_write(&ISR[irq]->Destination, physmask);
-}
-
-#ifdef notused
-/*
- *  Set the sense for an interrupt source (and disable it!)
- *
- *  sense: 1 for level, 0 for edge
- */
-static void openpic2_set_sense(u_int irq, int sense)
-{
-	if (ISR[irq] != 0)
-		openpic2_safe_writefield(&ISR[irq]->Vector_Priority,
-					OPENPIC_SENSE_LEVEL,
-					(sense ? OPENPIC_SENSE_LEVEL : 0));
-}
-#endif /* notused */
-
-/* No spinlocks, should not be necessary with the OpenPIC
- * (1 register = 1 interrupt and we have the desc lock).
- */
-static void openpic2_ack_irq(unsigned int irq_nr)
-{
-	openpic2_disable_irq(irq_nr);
-	openpic2_eoi();
-}
-
-static void openpic2_end_irq(unsigned int irq_nr)
-{
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		openpic2_enable_irq(irq_nr);
-}
-
-int
-openpic2_get_irq(void)
-{
-	int irq = openpic2_irq();
-
-	if (irq == (OPENPIC2_VEC_SPURIOUS + open_pic2_irq_offset))
-		irq = -1;
-	return irq;
-}
-
-#ifdef CONFIG_PM
-
-/*
- * We implement the IRQ controller as a sysdev and put it
- * to sleep at powerdown stage (the callback is named suspend,
- * but it's old semantics, for the Device Model, it's really
- * powerdown). The possible problem is that another sysdev that
- * happens to be suspend after this one will have interrupts off,
- * that may be an issue... For now, this isn't an issue on pmac
- * though...
- */
-
-static u32 save_ipi_vp[OPENPIC_NUM_IPI];
-static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES];
-static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES];
-static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS];
-static int openpic_suspend_count;
-
-static void openpic2_cached_enable_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	save_irq_src_vp[irq - open_pic2_irq_offset] &= ~OPENPIC_MASK;
-}
-
-static void openpic2_cached_disable_irq(u_int irq)
-{
-	check_arg_irq(irq);
-	save_irq_src_vp[irq - open_pic2_irq_offset] |= OPENPIC_MASK;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic2_suspend(struct sys_device *sysdev, pm_message_t state)
-{
-	int	i;
-	unsigned long flags;
-
-	spin_lock_irqsave(&openpic2_setup_lock, flags);
-
-	if (openpic_suspend_count++ > 0) {
-		spin_unlock_irqrestore(&openpic2_setup_lock, flags);
-		return 0;
-	}
-
-	open_pic2.enable = openpic2_cached_enable_irq;
-	open_pic2.disable = openpic2_cached_disable_irq;
-
-	for (i=0; i<NumProcessors; i++) {
-		save_cpu_task_pri[i] = openpic2_read(&OpenPIC2->Processor[i].Current_Task_Priority);
-		openpic2_writefield(&OpenPIC2->Processor[i].Current_Task_Priority,
-				   OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf);
-	}
-
-	for (i=0; i<OPENPIC_NUM_IPI; i++)
-		save_ipi_vp[i] = openpic2_read(&OpenPIC2->Global.IPI_Vector_Priority(i));
-	for (i=0; i<NumSources; i++) {
-		if (ISR[i] == 0)
-			continue;
-		save_irq_src_vp[i] = openpic2_read(&ISR[i]->Vector_Priority) & ~OPENPIC_ACTIVITY;
-		save_irq_src_dest[i] = openpic2_read(&ISR[i]->Destination);
-	}
-
-	spin_unlock_irqrestore(&openpic2_setup_lock, flags);
-
-	return 0;
-}
-
-/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
- * we need something better to deal with that... Maybe switch to S1 for
- * cpufreq changes
- */
-int openpic2_resume(struct sys_device *sysdev)
-{
-	int		i;
-	unsigned long	flags;
-	u32		vppmask =	OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
-					OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK |
-					OPENPIC_MASK;
-
-	spin_lock_irqsave(&openpic2_setup_lock, flags);
-
-	if ((--openpic_suspend_count) > 0) {
-		spin_unlock_irqrestore(&openpic2_setup_lock, flags);
-		return 0;
-	}
-
-	openpic2_reset();
-
-	/* OpenPIC sometimes seem to need some time to be fully back up... */
-	do {
-		openpic2_set_spurious(OPENPIC2_VEC_SPURIOUS+open_pic2_irq_offset);
-	} while(openpic2_readfield(&OpenPIC2->Global.Spurious_Vector, OPENPIC_VECTOR_MASK)
-			!= (OPENPIC2_VEC_SPURIOUS + open_pic2_irq_offset));
-	
-	openpic2_disable_8259_pass_through();
-
-	for (i=0; i<OPENPIC_NUM_IPI; i++)
-		openpic2_write(&OpenPIC2->Global.IPI_Vector_Priority(i),
-			      save_ipi_vp[i]);
-	for (i=0; i<NumSources; i++) {
-		if (ISR[i] == 0)
-			continue;
-		openpic2_write(&ISR[i]->Destination, save_irq_src_dest[i]);
-		openpic2_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
-		/* make sure mask gets to controller before we return to user */
-		do {
-			openpic2_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
-		} while (openpic2_readfield(&ISR[i]->Vector_Priority, vppmask)
-			 != (save_irq_src_vp[i] & vppmask));
-	}
-	for (i=0; i<NumProcessors; i++)
-		openpic2_write(&OpenPIC2->Processor[i].Current_Task_Priority,
-			      save_cpu_task_pri[i]);
-
-	open_pic2.enable = openpic2_enable_irq;
-	open_pic2.disable = openpic2_disable_irq;
-
-	spin_unlock_irqrestore(&openpic2_setup_lock, flags);
-
-	return 0;
-}
-
-#endif /* CONFIG_PM */
-
-/* HACK ALERT */
-static struct sysdev_class openpic2_sysclass = {
-	.name = "openpic2",
-};
-
-static struct sys_device device_openpic2 = {
-	.id		= 0,
-	.cls		= &openpic2_sysclass,
-};
-
-static struct sysdev_driver driver_openpic2 = {
-#ifdef CONFIG_PM
-	.suspend	= &openpic2_suspend,
-	.resume		= &openpic2_resume,
-#endif /* CONFIG_PM */
-};
-
-static int __init init_openpic2_sysfs(void)
-{
-	int rc;
-
-	if (!OpenPIC2_Addr)
-		return -ENODEV;
-	printk(KERN_DEBUG "Registering openpic2 with sysfs...\n");
-	rc = sysdev_class_register(&openpic2_sysclass);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys class\n");
-		return -ENODEV;
-	}
-	rc = sysdev_register(&device_openpic2);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys device\n");
-		return -ENODEV;
-	}
-	rc = sysdev_driver_register(&openpic2_sysclass, &driver_openpic2);
-	if (rc) {
-		printk(KERN_ERR "Failed registering openpic sys driver\n");
-		return -ENODEV;
-	}
-	return 0;
-}
-
-subsys_initcall(init_openpic2_sysfs);
-
diff --git a/arch/ppc/syslib/open_pic_defs.h b/arch/ppc/syslib/open_pic_defs.h
deleted file mode 100644
index 3a25de7cb572..000000000000
--- a/arch/ppc/syslib/open_pic_defs.h
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- *  Copyright (C) 1997 Geert Uytterhoeven
- *
- *  This file is based on the following documentation:
- *
- *	The Open Programmable Interrupt Controller (PIC)
- *	Register Interface Specification Revision 1.2
- *
- *	Issue Date: October 1995
- *
- *	Issued jointly by Advanced Micro Devices and Cyrix Corporation
- *
- *	AMD is a registered trademark of Advanced Micro Devices, Inc.
- *	Copyright (C) 1995, Advanced Micro Devices, Inc. and Cyrix, Inc.
- *	All Rights Reserved.
- *
- *  To receive a copy of this documentation, send an email to openpic@amd.com.
- *
- *  This file is subject to the terms and conditions of the GNU General Public
- *  License.  See the file COPYING in the main directory of this archive
- *  for more details.
- */
-
-#ifndef _LINUX_OPENPIC_H
-#define _LINUX_OPENPIC_H
-
-#ifdef __KERNEL__
-
-    /*
-     *  OpenPIC supports up to 2048 interrupt sources and up to 32 processors
-     */
-
-#define OPENPIC_MAX_SOURCES	2048
-#define OPENPIC_MAX_PROCESSORS	32
-#define OPENPIC_MAX_ISU		16
-
-#define OPENPIC_NUM_TIMERS	4
-#define OPENPIC_NUM_IPI		4
-#define OPENPIC_NUM_PRI		16
-#define OPENPIC_NUM_VECTORS	256
-
-
-
-    /*
-     *  OpenPIC Registers are 32 bits and aligned on 128 bit boundaries
-     */
-
-typedef struct _OpenPIC_Reg {
-    u_int Reg;					/* Little endian! */
-    char Pad[0xc];
-} OpenPIC_Reg;
-
-
-    /*
-     *  Per Processor Registers
-     */
-
-typedef struct _OpenPIC_Processor {
-    /*
-     *  Private Shadow Registers (for SLiC backwards compatibility)
-     */
-    u_int IPI0_Dispatch_Shadow;			/* Write Only */
-    char Pad1[0x4];
-    u_int IPI0_Vector_Priority_Shadow;		/* Read/Write */
-    char Pad2[0x34];
-    /*
-     *  Interprocessor Interrupt Command Ports
-     */
-    OpenPIC_Reg _IPI_Dispatch[OPENPIC_NUM_IPI];	/* Write Only */
-    /*
-     *  Current Task Priority Register
-     */
-    OpenPIC_Reg _Current_Task_Priority;		/* Read/Write */
-    char Pad3[0x10];
-    /*
-     *  Interrupt Acknowledge Register
-     */
-    OpenPIC_Reg _Interrupt_Acknowledge;		/* Read Only */
-    /*
-     *  End of Interrupt (EOI) Register
-     */
-    OpenPIC_Reg _EOI;				/* Read/Write */
-    char Pad5[0xf40];
-} OpenPIC_Processor;
-
-
-    /*
-     *  Timer Registers
-     */
-
-typedef struct _OpenPIC_Timer {
-    OpenPIC_Reg _Current_Count;			/* Read Only */
-    OpenPIC_Reg _Base_Count;			/* Read/Write */
-    OpenPIC_Reg _Vector_Priority;		/* Read/Write */
-    OpenPIC_Reg _Destination;			/* Read/Write */
-} OpenPIC_Timer;
-
-
-    /*
-     *  Global Registers
-     */
-
-typedef struct _OpenPIC_Global {
-    /*
-     *  Feature Reporting Registers
-     */
-    OpenPIC_Reg _Feature_Reporting0;		/* Read Only */
-    OpenPIC_Reg _Feature_Reporting1;		/* Future Expansion */
-    /*
-     *  Global Configuration Registers
-     */
-    OpenPIC_Reg _Global_Configuration0;		/* Read/Write */
-    OpenPIC_Reg _Global_Configuration1;		/* Future Expansion */
-    /*
-     *  Vendor Specific Registers
-     */
-    OpenPIC_Reg _Vendor_Specific[4];
-    /*
-     *  Vendor Identification Register
-     */
-    OpenPIC_Reg _Vendor_Identification;		/* Read Only */
-    /*
-     *  Processor Initialization Register
-     */
-    OpenPIC_Reg _Processor_Initialization;	/* Read/Write */
-    /*
-     *  IPI Vector/Priority Registers
-     */
-    OpenPIC_Reg _IPI_Vector_Priority[OPENPIC_NUM_IPI];	/* Read/Write */
-    /*
-     *  Spurious Vector Register
-     */
-    OpenPIC_Reg _Spurious_Vector;		/* Read/Write */
-    /*
-     *  Global Timer Registers
-     */
-    OpenPIC_Reg _Timer_Frequency;		/* Read/Write */
-    OpenPIC_Timer Timer[OPENPIC_NUM_TIMERS];
-    char Pad1[0xee00];
-} OpenPIC_Global;
-
-
-    /*
-     *  Interrupt Source Registers
-     */
-
-typedef struct _OpenPIC_Source {
-    OpenPIC_Reg _Vector_Priority;		/* Read/Write */
-    OpenPIC_Reg _Destination;			/* Read/Write */
-} OpenPIC_Source, *OpenPIC_SourcePtr;
-
-
-    /*
-     *  OpenPIC Register Map
-     */
-
-struct OpenPIC {
-    char Pad1[0x1000];
-    /*
-     *  Global Registers
-     */
-    OpenPIC_Global Global;
-    /*
-     *  Interrupt Source Configuration Registers
-     */
-    OpenPIC_Source Source[OPENPIC_MAX_SOURCES];
-    /*
-     *  Per Processor Registers
-     */
-    OpenPIC_Processor Processor[OPENPIC_MAX_PROCESSORS];
-};
-
-    /*
-     *  Current Task Priority Register
-     */
-
-#define OPENPIC_CURRENT_TASK_PRIORITY_MASK	0x0000000f
-
-    /*
-     *  Who Am I Register
-     */
-
-#define OPENPIC_WHO_AM_I_ID_MASK		0x0000001f
-
-    /*
-     *  Feature Reporting Register 0
-     */
-
-#define OPENPIC_FEATURE_LAST_SOURCE_MASK	0x07ff0000
-#define OPENPIC_FEATURE_LAST_SOURCE_SHIFT	16
-#define OPENPIC_FEATURE_LAST_PROCESSOR_MASK	0x00001f00
-#define OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT	8
-#define OPENPIC_FEATURE_VERSION_MASK		0x000000ff
-
-    /*
-     *  Global Configuration Register 0
-     */
-
-#define OPENPIC_CONFIG_RESET			0x80000000
-#define OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE	0x20000000
-#define OPENPIC_CONFIG_BASE_MASK		0x000fffff
-
-    /*
-     *  Global Configuration Register 1
-     *  This is the EICR on EPICs.
-     */
-
-#define OPENPIC_EICR_S_CLK_MASK			0x70000000
-#define OPENPIC_EICR_SIE			0x08000000
-
-    /*
-     *  Vendor Identification Register
-     */
-
-#define OPENPIC_VENDOR_ID_STEPPING_MASK		0x00ff0000
-#define OPENPIC_VENDOR_ID_STEPPING_SHIFT	16
-#define OPENPIC_VENDOR_ID_DEVICE_ID_MASK	0x0000ff00
-#define OPENPIC_VENDOR_ID_DEVICE_ID_SHIFT	8
-#define OPENPIC_VENDOR_ID_VENDOR_ID_MASK	0x000000ff
-
-    /*
-     *  Vector/Priority Registers
-     */
-
-#define OPENPIC_MASK				0x80000000
-#define OPENPIC_ACTIVITY			0x40000000	/* Read Only */
-#define OPENPIC_PRIORITY_MASK			0x000f0000
-#define OPENPIC_PRIORITY_SHIFT			16
-#define OPENPIC_VECTOR_MASK			0x000000ff
-
-
-    /*
-     *  Interrupt Source Registers
-     */
-
-#define OPENPIC_POLARITY_POSITIVE		0x00800000
-#define OPENPIC_POLARITY_NEGATIVE		0x00000000
-#define OPENPIC_POLARITY_MASK			0x00800000
-#define OPENPIC_SENSE_LEVEL			0x00400000
-#define OPENPIC_SENSE_EDGE			0x00000000
-#define OPENPIC_SENSE_MASK			0x00400000
-
-
-    /*
-     *  Timer Registers
-     */
-
-#define OPENPIC_COUNT_MASK			0x7fffffff
-#define OPENPIC_TIMER_TOGGLE			0x80000000
-#define OPENPIC_TIMER_COUNT_INHIBIT		0x80000000
-
-
-    /*
-     *  Aliases to make life simpler
-     */
-
-/* Per Processor Registers */
-#define IPI_Dispatch(i)			_IPI_Dispatch[i].Reg
-#define Current_Task_Priority		_Current_Task_Priority.Reg
-#define Interrupt_Acknowledge		_Interrupt_Acknowledge.Reg
-#define EOI				_EOI.Reg
-
-/* Global Registers */
-#define Feature_Reporting0		_Feature_Reporting0.Reg
-#define Feature_Reporting1		_Feature_Reporting1.Reg
-#define Global_Configuration0		_Global_Configuration0.Reg
-#define Global_Configuration1		_Global_Configuration1.Reg
-#define Vendor_Specific(i)		_Vendor_Specific[i].Reg
-#define Vendor_Identification		_Vendor_Identification.Reg
-#define Processor_Initialization	_Processor_Initialization.Reg
-#define IPI_Vector_Priority(i)		_IPI_Vector_Priority[i].Reg
-#define Spurious_Vector			_Spurious_Vector.Reg
-#define Timer_Frequency			_Timer_Frequency.Reg
-
-/* Timer Registers */
-#define Current_Count			_Current_Count.Reg
-#define Base_Count			_Base_Count.Reg
-#define Vector_Priority			_Vector_Priority.Reg
-#define Destination			_Destination.Reg
-
-/* Interrupt Source Registers */
-#define Vector_Priority			_Vector_Priority.Reg
-#define Destination			_Destination.Reg
-
-#endif /* __KERNEL__ */
-
-#endif /* _LINUX_OPENPIC_H */
diff --git a/arch/ppc/syslib/pci_auto.c b/arch/ppc/syslib/pci_auto.c
deleted file mode 100644
index ee20a86fcc4b..000000000000
--- a/arch/ppc/syslib/pci_auto.c
+++ /dev/null
@@ -1,515 +0,0 @@
-/*
- * PCI autoconfiguration library
- *
- * Author: Matt Porter <mporter@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-/*
- * The CardBus support is very preliminary.  Preallocating space is
- * the way to go but will require some change in card services to
- * make it useful.  Eventually this will ensure that we can put
- * multiple CB bridges behind multiple P2P bridges.  For now, at
- * least it ensures that we place the CB bridge BAR and assigned
- * initial bus numbers.  I definitely need to do something about
- * the lack of 16-bit I/O support. -MDP
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/pci-bridge.h>
-
-#define	PCIAUTO_IDE_MODE_MASK		0x05
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif /* DEBUG */
-
-static int pciauto_upper_iospc;
-static int pciauto_upper_memspc;
-
-void __init pciauto_setup_bars(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int bar_limit)
-{
-	int bar_response, bar_size, bar_value;
-	int bar, addr_mask;
-	int * upper_limit;
-	int found_mem64 = 0;
-
-	DBG("PCI Autoconfig: Found Bus %d, Device %d, Function %d\n",
-		current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn) );
-
-	for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) {
-		/* Tickle the BAR and get the response */
-		early_write_config_dword(hose,
-				current_bus,
-				pci_devfn,
-				bar,
-				0xffffffff);
-		early_read_config_dword(hose,
-				current_bus,
-				pci_devfn,
-				bar,
-				&bar_response);
-
-		/* If BAR is not implemented go to the next BAR */
-		if (!bar_response)
-			continue;
-
-		/* Check the BAR type and set our address mask */
-		if (bar_response & PCI_BASE_ADDRESS_SPACE) {
-			addr_mask = PCI_BASE_ADDRESS_IO_MASK;
-			upper_limit = &pciauto_upper_iospc;
-			DBG("PCI Autoconfig: BAR 0x%x, I/O, ", bar);
-		} else {
-			if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) ==
-			PCI_BASE_ADDRESS_MEM_TYPE_64)
-				found_mem64 = 1;
-
-			addr_mask = PCI_BASE_ADDRESS_MEM_MASK;	
-			upper_limit = &pciauto_upper_memspc;
-			DBG("PCI Autoconfig: BAR 0x%x, Mem ", bar);
-		}
-
-		/* Calculate requested size */
-		bar_size = ~(bar_response & addr_mask) + 1;
-
-		/* Allocate a base address */
-		bar_value = (*upper_limit - bar_size) & ~(bar_size - 1);
-
-		/* Write it out and update our limit */
-		early_write_config_dword(hose,
-				current_bus,
-				pci_devfn,
-				bar,
-				bar_value);
-
-		*upper_limit = bar_value;
-
-		/*
-		 * If we are a 64-bit decoder then increment to the
-		 * upper 32 bits of the bar and force it to locate
-		 * in the lower 4GB of memory.
-		 */
-		if (found_mem64) {
-			bar += 4;
-			early_write_config_dword(hose,
-					current_bus,
-					pci_devfn,
-					bar,
-					0x00000000);
-			found_mem64 = 0;
-		}
-
-		DBG("size=0x%x, address=0x%x\n",
-			bar_size, bar_value);
-	}
-
-}
-
-void __init pciauto_prescan_setup_bridge(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int sub_bus,
-		int *iosave,
-		int *memsave)
-{
-	/* Configure bus number registers */
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PRIMARY_BUS,
-			current_bus);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SECONDARY_BUS,
-			sub_bus + 1);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SUBORDINATE_BUS,
-			0xff);
-
-	/* Round memory allocator to 1MB boundary */
-	pciauto_upper_memspc &= ~(0x100000 - 1);
-	*memsave = pciauto_upper_memspc;
-
-	/* Round I/O allocator to 4KB boundary */
-	pciauto_upper_iospc &= ~(0x1000 - 1);
-	*iosave = pciauto_upper_iospc;
-
-	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_MEMORY_LIMIT,
-			((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_IO_LIMIT,
-			((pciauto_upper_iospc - 1) & 0x0000f000) >> 8);
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_IO_LIMIT_UPPER16,
-			((pciauto_upper_iospc - 1) & 0xffff0000) >> 16);
-
-	/* Zero upper 32 bits of prefetchable base/limit */
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PREF_BASE_UPPER32,
-			0);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PREF_LIMIT_UPPER32,
-			0);
-}
-
-void __init pciauto_postscan_setup_bridge(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int sub_bus,
-		int *iosave,
-		int *memsave)
-{
-	int cmdstat;
-
-	/* Configure bus number registers */
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SUBORDINATE_BUS,
-			sub_bus);
-
-	/*
-	 * Round memory allocator to 1MB boundary.
-	 * If no space used, allocate minimum.
-	 */
-	pciauto_upper_memspc &= ~(0x100000 - 1);
-	if (*memsave == pciauto_upper_memspc)
-		pciauto_upper_memspc -= 0x00100000;
-
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_MEMORY_BASE,
-			pciauto_upper_memspc >> 16);
-
-	/* Allocate 1MB for pre-fretch */
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PREF_MEMORY_LIMIT,
-			((pciauto_upper_memspc - 1) & 0xfff00000) >> 16);
-
-	pciauto_upper_memspc -= 0x100000;
-
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PREF_MEMORY_BASE,
-			pciauto_upper_memspc >> 16);
-
-	/* Round I/O allocator to 4KB boundary */
-	pciauto_upper_iospc &= ~(0x1000 - 1);
-	if (*iosave == pciauto_upper_iospc)
-		pciauto_upper_iospc -= 0x1000;
-
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_IO_BASE,
-			(pciauto_upper_iospc & 0x0000f000) >> 8);
-	early_write_config_word(hose,
-			current_bus,
-			pci_devfn,
-			PCI_IO_BASE_UPPER16,
-			pciauto_upper_iospc >> 16);
-
-	/* Enable memory and I/O accesses, enable bus master */
-	early_read_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_COMMAND,
-			&cmdstat);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_COMMAND,
-			cmdstat |
-			PCI_COMMAND_IO |
-			PCI_COMMAND_MEMORY |
-			PCI_COMMAND_MASTER);
-}
-
-void __init pciauto_prescan_setup_cardbus_bridge(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int sub_bus,
-		int *iosave,
-		int *memsave)
-{
-	/* Configure bus number registers */
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_PRIMARY_BUS,
-			current_bus);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SECONDARY_BUS,
-			sub_bus + 1);
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SUBORDINATE_BUS,
-			0xff);
-
-	/* Round memory allocator to 4KB boundary */
-	pciauto_upper_memspc &= ~(0x1000 - 1);
-	*memsave = pciauto_upper_memspc;
-
-	/* Round I/O allocator to 4 byte boundary */
-	pciauto_upper_iospc &= ~(0x4 - 1);
-	*iosave = pciauto_upper_iospc;
-
-	/* Set up memory and I/O filter limits, assume 32-bit I/O space */
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			0x20,
-			pciauto_upper_memspc - 1);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			0x30,
-			pciauto_upper_iospc - 1);
-}
-
-void __init pciauto_postscan_setup_cardbus_bridge(struct pci_controller *hose,
-		int current_bus,
-		int pci_devfn,
-		int sub_bus,
-		int *iosave,
-		int *memsave)
-{
-	int cmdstat;
-
-	/*
-	 * Configure subordinate bus number.  The PCI subsystem
-	 * bus scan will renumber buses (reserving three additional
-	 * for this PCI<->CardBus bridge for the case where a CardBus
-	 * adapter contains a P2P or CB2CB bridge.
-	 */
-	early_write_config_byte(hose,
-			current_bus,
-			pci_devfn,
-			PCI_SUBORDINATE_BUS,
-			sub_bus);
-
-	/*
-	 * Reserve an additional 4MB for mem space and 16KB for
-	 * I/O space.  This should cover any additional space
-	 * requirement of unusual CardBus devices with
-	 * additional bridges that can consume more address space.
-	 *
-	 * Although pcmcia-cs currently will reprogram bridge
-	 * windows, the goal is to add an option to leave them
-	 * alone and use the bridge window ranges as the regions
-	 * that are searched for free resources upon hot-insertion
-	 * of a device.  This will allow a PCI<->CardBus bridge
-	 * configured by this routine to happily live behind a
-	 * P2P bridge in a system.
-	 */
-	pciauto_upper_memspc -= 0x00400000;
-	pciauto_upper_iospc -= 0x00004000;
-
-	/* Round memory allocator to 4KB boundary */
-	pciauto_upper_memspc &= ~(0x1000 - 1);
-
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			0x1c,
-			pciauto_upper_memspc);
-
-	/* Round I/O allocator to 4 byte boundary */
-	pciauto_upper_iospc &= ~(0x4 - 1);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			0x2c,
-			pciauto_upper_iospc);
-
-	/* Enable memory and I/O accesses, enable bus master */
-	early_read_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_COMMAND,
-			&cmdstat);
-	early_write_config_dword(hose,
-			current_bus,
-			pci_devfn,
-			PCI_COMMAND,
-			cmdstat |
-			PCI_COMMAND_IO |
-			PCI_COMMAND_MEMORY |
-			PCI_COMMAND_MASTER);
-}
-
-int __init pciauto_bus_scan(struct pci_controller *hose, int current_bus)
-{
-	int sub_bus, pci_devfn, pci_class, cmdstat, found_multi = 0;
-	unsigned short vid;
-	unsigned char header_type;
-
-	/*
-	 * Fetch our I/O and memory space upper boundaries used
-	 * to allocated base addresses on this hose.
-	 */
-	if (current_bus == hose->first_busno) {
-		pciauto_upper_iospc = hose->io_space.end + 1;
-		pciauto_upper_memspc = hose->mem_space.end + 1;
-	}
-
-	sub_bus = current_bus;
-
-	for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) {
-		/* Skip our host bridge */
-		if ( (current_bus == hose->first_busno) && (pci_devfn == 0) )
-			continue;
-
-		if (PCI_FUNC(pci_devfn) && !found_multi)
-			continue;
-
-		/* If config space read fails from this device, move on */
-		if (early_read_config_byte(hose,
-				current_bus,
-				pci_devfn,
-				PCI_HEADER_TYPE,
-				&header_type))
-			continue;
-
-		if (!PCI_FUNC(pci_devfn))
-			found_multi = header_type & 0x80;
-
-		early_read_config_word(hose,
-				current_bus,
-				pci_devfn,
-				PCI_VENDOR_ID,
-				&vid);
-
-		if (vid != 0xffff) {
-			early_read_config_dword(hose,
-					current_bus,
-					pci_devfn,
-					PCI_CLASS_REVISION, &pci_class);
-			if ( (pci_class >> 16) == PCI_CLASS_BRIDGE_PCI ) {
-				int iosave, memsave;
-
-				DBG("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_SLOT(pci_devfn));
-				/* Allocate PCI I/O and/or memory space */
-				pciauto_setup_bars(hose,
-						current_bus,
-						pci_devfn,
-						PCI_BASE_ADDRESS_1);
-
-				pciauto_prescan_setup_bridge(hose,
-						current_bus,
-						pci_devfn,
-						sub_bus,
-						&iosave,
-						&memsave);
-				sub_bus = pciauto_bus_scan(hose, sub_bus+1);
-				pciauto_postscan_setup_bridge(hose,
-						current_bus,
-						pci_devfn,
-						sub_bus,
-						&iosave,
-						&memsave);
-			} else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) {
-				int iosave, memsave;
-
-				DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn));
-				/* Place CardBus Socket/ExCA registers */
-				pciauto_setup_bars(hose,
-						current_bus,
-						pci_devfn,
-						PCI_BASE_ADDRESS_0);
-
-				pciauto_prescan_setup_cardbus_bridge(hose,
-						current_bus,
-						pci_devfn,
-						sub_bus,
-						&iosave,
-						&memsave);
-				sub_bus = pciauto_bus_scan(hose, sub_bus+1);
-				pciauto_postscan_setup_cardbus_bridge(hose,
-						current_bus,
-						pci_devfn,
-						sub_bus,
-						&iosave,
-						&memsave);
-			} else {
-				if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) {
-					unsigned char prg_iface;
-
-					early_read_config_byte(hose,
-							current_bus,
-							pci_devfn,
-							PCI_CLASS_PROG,
-							&prg_iface);
-					if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) {
-						DBG("PCI Autoconfig: Skipping legacy mode IDE controller\n");
-						continue;
-					}
-				}
-				/* Allocate PCI I/O and/or memory space */
-				pciauto_setup_bars(hose,
-						current_bus,
-						pci_devfn,
-						PCI_BASE_ADDRESS_5);
-
-				/*
-				 * Enable some standard settings
-				 */
-				early_read_config_dword(hose,
-						current_bus,
-						pci_devfn,
-						PCI_COMMAND,
-						&cmdstat);
-				early_write_config_dword(hose,
-						current_bus,
-						pci_devfn,
-						PCI_COMMAND,
-						cmdstat |
-						PCI_COMMAND_IO |
-						PCI_COMMAND_MEMORY |
-						PCI_COMMAND_MASTER);
-				early_write_config_byte(hose,
-						current_bus,
-						pci_devfn,
-						PCI_LATENCY_TIMER,
-						0x80);
-			}
-		}
-	}
-	return sub_bus;
-}
diff --git a/arch/ppc/syslib/ppc403_pic.c b/arch/ppc/syslib/ppc403_pic.c
deleted file mode 100644
index c3b7b8bfbcfe..000000000000
--- a/arch/ppc/syslib/ppc403_pic.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- *
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *
- *    Module name: ppc403_pic.c
- *
- *    Description:
- *      Interrupt controller driver for PowerPC 403-based processors.
- */
-
-/*
- * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
- * 32 possible interrupts, a majority of which are not implemented on
- * all cores. There are six configurable, external interrupt pins and
- * there are eight internal interrupts for the on-chip serial port
- * (SPU), DMA controller, and JTAG controller.
- *
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/stddef.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/machdep.h>
-
-/* Function Prototypes */
-
-static void ppc403_aic_enable(unsigned int irq);
-static void ppc403_aic_disable(unsigned int irq);
-static void ppc403_aic_disable_and_ack(unsigned int irq);
-
-static struct hw_interrupt_type ppc403_aic = {
-	.typename = "403GC AIC",
-	.enable = ppc403_aic_enable,
-	.disable = ppc403_aic_disable,
-	.ack = ppc403_aic_disable_and_ack,
-};
-
-int
-ppc403_pic_get_irq(void)
-{
-	int irq;
-	unsigned long bits;
-
-	/*
-	 * Only report the status of those interrupts that are actually
-	 * enabled.
-	 */
-
-	bits = mfdcr(DCRN_EXISR) & mfdcr(DCRN_EXIER);
-
-	/*
-	 * Walk through the interrupts from highest priority to lowest, and
-	 * report the first pending interrupt found.
-	 * We want PPC, not C bit numbering, so just subtract the ffs()
-	 * result from 32.
-	 */
-	irq = 32 - ffs(bits);
-
-	if (irq == NR_AIC_IRQS)
-		irq = -1;
-
-	return (irq);
-}
-
-static void
-ppc403_aic_enable(unsigned int irq)
-{
-	int bit, word;
-
-	bit = irq & 0x1f;
-	word = irq >> 5;
-
-	ppc_cached_irq_mask[word] |= (1 << (31 - bit));
-	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[word]);
-}
-
-static void
-ppc403_aic_disable(unsigned int irq)
-{
-	int bit, word;
-
-	bit = irq & 0x1f;
-	word = irq >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
-	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[word]);
-}
-
-static void
-ppc403_aic_disable_and_ack(unsigned int irq)
-{
-	int bit, word;
-
-	bit = irq & 0x1f;
-	word = irq >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
-	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[word]);
-	mtdcr(DCRN_EXISR, (1 << (31 - bit)));
-}
-
-void __init
-ppc4xx_pic_init(void)
-{
-	int i;
-
-	/*
-	 * Disable all external interrupts until they are
-	 * explicitly requested.
-	 */
-	ppc_cached_irq_mask[0] = 0;
-
-	mtdcr(DCRN_EXIER, ppc_cached_irq_mask[0]);
-
-	ppc_md.get_irq = ppc403_pic_get_irq;
-
-	for (i = 0; i < NR_IRQS; i++)
-		irq_desc[i].chip = &ppc403_aic;
-}
diff --git a/arch/ppc/syslib/ppc405_pci.c b/arch/ppc/syslib/ppc405_pci.c
deleted file mode 100644
index 9e9035693bfa..000000000000
--- a/arch/ppc/syslib/ppc405_pci.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * Authors: Frank Rowand <frank_rowand@mvista.com>,
- * Debbie Chu <debbie_chu@mvista.com>, or source@mvista.com
- * Further modifications by Armin Kuster <akuster@mvista.com>
- *
- * 2000 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Based on arch/ppc/kernel/indirect.c, Copyright (C) 1998 Gabriel Paubert.
- */
-
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/machdep.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <asm/ocp.h>
-#include <asm/ibm4xx.h>
-#include <asm/pci-bridge.h>
-#include <asm/ibm_ocp_pci.h>
-
-
-extern void bios_fixup(struct pci_controller *, struct pcil0_regs *);
-extern int ppc405_map_irq(struct pci_dev *dev, unsigned char idsel,
-			  unsigned char pin);
-
-void
-ppc405_pcibios_fixup_resources(struct pci_dev *dev)
-{
-	int i;
-	unsigned long max_host_addr;
-	unsigned long min_host_addr;
-	struct resource *res;
-
-	/*
-	 * openbios puts some graphics cards in the same range as the host
-	 * controller uses to map to SDRAM.  Fix it.
-	 */
-
-	min_host_addr = 0;
-	max_host_addr = PPC405_PCI_MEM_BASE - 1;
-
-	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
-		res = dev->resource + i;
-		if (!res->start)
-			continue;
-		if ((res->flags & IORESOURCE_MEM) &&
-		    (((res->start >= min_host_addr)
-		      && (res->start <= max_host_addr))
-		     || ((res->end >= min_host_addr)
-			 && (res->end <= max_host_addr))
-		     || ((res->start < min_host_addr)
-			 && (res->end > max_host_addr))
-		    )
-		    ) {
-
-			/* force pcibios_assign_resources() to assign a new address */
-			res->end -= res->start;
-			res->start = 0;
-		}
-	}
-}
-
-static int
-ppc4xx_exclude_device(unsigned char bus, unsigned char devfn)
-{
-	/* We prevent us from seeing ourselves to avoid having
-	 * the kernel try to remap our BAR #1 and fuck up bus
-	 * master from external PCI devices
-	 */
-	return (bus == 0 && devfn == 0);
-}
-
-void
-ppc4xx_find_bridges(void)
-{
-	struct pci_controller *hose_a;
-	struct pcil0_regs *pcip;
-	unsigned int tmp_addr;
-	unsigned int tmp_size;
-	unsigned int reg_index;
-	unsigned int new_pmm_max = 0;
-	unsigned int new_pmm_min = 0;
-
-	isa_io_base = 0;
-	isa_mem_base = 0;
-	pci_dram_offset = 0;
-
-	/* Setup PCI32 hose */
-	hose_a = pcibios_alloc_controller();
-	if (!hose_a)
-		return;
-	setup_indirect_pci(hose_a, PPC405_PCI_CONFIG_ADDR,
-			   PPC405_PCI_CONFIG_DATA);
-
-	pcip = ioremap(PPC4xx_PCI_LCFG_PADDR, PAGE_SIZE);
-	if (pcip != NULL) {
-
-#if defined(CONFIG_BIOS_FIXUP)
-		bios_fixup(hose_a, pcip);
-#endif
-		new_pmm_min = 0xffffffff;
-		for (reg_index = 0; reg_index < 3; reg_index++) {
-			tmp_size = in_le32(&pcip->pmm[reg_index].ma);	// mask & attrs
-			/* test the enable bit */
-			if ((tmp_size & 0x1) == 0)
-				continue;
-			tmp_addr = in_le32(&pcip->pmm[reg_index].pcila);	// PCI addr
-			if (tmp_addr < PPC405_PCI_PHY_MEM_BASE) {
-				printk(KERN_DEBUG
-				       "Disabling mapping to PCI mem addr 0x%8.8x\n",
-				       tmp_addr);
-				out_le32(&pcip->pmm[reg_index].ma, tmp_size & ~1);	// *_PMMOMA
-				continue;
-			}
-			tmp_addr = in_le32(&pcip->pmm[reg_index].la);	// *_PMMOLA
-			if (tmp_addr < new_pmm_min)
-				new_pmm_min = tmp_addr;
-			tmp_addr = tmp_addr +
-				(0xffffffff - (tmp_size & 0xffffc000));
-			if (tmp_addr > PPC405_PCI_UPPER_MEM) {
-				new_pmm_max = tmp_addr;	// PPC405_PCI_UPPER_MEM
-			} else {
-				new_pmm_max = PPC405_PCI_UPPER_MEM;
-			}
-
-		}		// for
-
-		iounmap(pcip);
-	}
-
-	hose_a->first_busno = 0;
-	hose_a->last_busno = 0xff;
-	hose_a->pci_mem_offset = 0;
-
-	/* Setup bridge memory/IO ranges & resources
-	 * TODO: Handle firmware setting up a legacy ISA mem base
-	 */
-	hose_a->io_space.start = PPC405_PCI_LOWER_IO;
-	hose_a->io_space.end = PPC405_PCI_UPPER_IO;
-	hose_a->mem_space.start = new_pmm_min;
-	hose_a->mem_space.end = new_pmm_max;
-	hose_a->io_base_phys = PPC405_PCI_PHY_IO_BASE;
-	hose_a->io_base_virt = ioremap(hose_a->io_base_phys, 0x10000);
-	hose_a->io_resource.start = 0;
-	hose_a->io_resource.end = PPC405_PCI_UPPER_IO - PPC405_PCI_LOWER_IO;
-	hose_a->io_resource.flags = IORESOURCE_IO;
-	hose_a->io_resource.name = "PCI I/O";
-	hose_a->mem_resources[0].start = new_pmm_min;
-	hose_a->mem_resources[0].end = new_pmm_max;
-	hose_a->mem_resources[0].flags = IORESOURCE_MEM;
-	hose_a->mem_resources[0].name = "PCI Memory";
-	isa_io_base = (int) hose_a->io_base_virt;
-	isa_mem_base = 0;	/*     ISA not implemented */
-	ISA_DMA_THRESHOLD = 0x00ffffff;	/* ??? ISA not implemented */
-
-	/* Scan busses & initial setup by pci_auto */
-	hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
-	hose_a->last_busno = 0;
-
-	/* Setup ppc_md */
-	ppc_md.pcibios_fixup = NULL;
-	ppc_md.pci_exclude_device = ppc4xx_exclude_device;
-	ppc_md.pcibios_fixup_resources = ppc405_pcibios_fixup_resources;
-	ppc_md.pci_swizzle = common_swizzle;
-	ppc_md.pci_map_irq = ppc405_map_irq;
-}
diff --git a/arch/ppc/syslib/ppc440spe_pcie.c b/arch/ppc/syslib/ppc440spe_pcie.c
deleted file mode 100644
index dd5d4b958c31..000000000000
--- a/arch/ppc/syslib/ppc440spe_pcie.c
+++ /dev/null
@@ -1,441 +0,0 @@
-/*
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- * Roland Dreier <rolandd@cisco.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-#include <asm/reg.h>
-#include <asm/io.h>
-#include <asm/ibm44x.h>
-
-#include "ppc440spe_pcie.h"
-
-static int
-pcie_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		     int len, u32 *val)
-{
-	struct pci_controller *hose = bus->sysdata;
-
-	if (PCI_SLOT(devfn) != 1)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	offset += devfn << 12;
-
-	/*
-	 * Note: the caller has already checked that offset is
-	 * suitably aligned and that len is 1, 2 or 4.
-	 */
-	switch (len) {
-	case 1:
-		*val = in_8(hose->cfg_data + offset);
-		break;
-	case 2:
-		*val = in_le16(hose->cfg_data + offset);
-		break;
-	default:
-		*val = in_le32(hose->cfg_data + offset);
-		break;
-	}
-
-	if (0) printk("%s: read %x(%d) @ %x\n", __func__, *val, len, offset);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
-		      int len, u32 val)
-{
-	struct pci_controller *hose = bus->sysdata;
-
-	if (PCI_SLOT(devfn) != 1)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	offset += devfn << 12;
-
-	switch (len) {
-	case 1:
-		out_8(hose->cfg_data + offset, val);
-		break;
-	case 2:
-		out_le16(hose->cfg_data + offset, val);
-		break;
-	default:
-		out_le32(hose->cfg_data + offset, val);
-		break;
-	}
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pcie_pci_ops =
-{
-	.read  = pcie_read_config,
-	.write = pcie_write_config
-};
-
-enum {
-	PTYPE_ENDPOINT		= 0x0,
-	PTYPE_LEGACY_ENDPOINT	= 0x1,
-	PTYPE_ROOT_PORT		= 0x4,
-
-	LNKW_X1			= 0x1,
-	LNKW_X4			= 0x4,
-	LNKW_X8			= 0x8
-};
-
-static void check_error(void)
-{
-	u32 valPE0, valPE1, valPE2;
-
-	/* SDR0_PEGPLLLCT1 reset */
-	if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000)) {
-		printk(KERN_INFO "PCIE: SDR0_PEGPLLLCT1 reset error 0x%8x\n", valPE0);
-	}
-
-	valPE0 = SDR_READ(PESDR0_RCSSET);
-	valPE1 = SDR_READ(PESDR1_RCSSET);
-	valPE2 = SDR_READ(PESDR2_RCSSET);
-
-	/* SDR0_PExRCSSET rstgu */
-	if ( !(valPE0 & 0x01000000) ||
-	     !(valPE1 & 0x01000000) ||
-	     !(valPE2 & 0x01000000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstgu error\n");
-	}
-
-	/* SDR0_PExRCSSET rstdl */
-	if ( !(valPE0 & 0x00010000) ||
-	     !(valPE1 & 0x00010000) ||
-	     !(valPE2 & 0x00010000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstdl error\n");
-	}
-
-	/* SDR0_PExRCSSET rstpyn */
-	if ( (valPE0 & 0x00001000) ||
-	     (valPE1 & 0x00001000) ||
-	     (valPE2 & 0x00001000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rstpyn error\n");
-	}
-
-	/* SDR0_PExRCSSET hldplb */
-	if ( (valPE0 & 0x10000000) ||
-	     (valPE1 & 0x10000000) ||
-	     (valPE2 & 0x10000000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET hldplb error\n");
-	}
-
-	/* SDR0_PExRCSSET rdy */
-	if ( (valPE0 & 0x00100000) ||
-	     (valPE1 & 0x00100000) ||
-	     (valPE2 & 0x00100000)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET rdy error\n");
-	}
-
-	/* SDR0_PExRCSSET shutdown */
-	if ( (valPE0 & 0x00000100) ||
-	     (valPE1 & 0x00000100) ||
-	     (valPE2 & 0x00000100)) {
-		printk(KERN_INFO "PCIE:  SDR0_PExRCSSET shutdown error\n");
-	}
-}
-
-/*
- * Initialize PCI Express core as described in User Manual section 27.12.1
- */
-int ppc440spe_init_pcie(void)
-{
-	/* Set PLL clock receiver to LVPECL */
-	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
-
-	check_error();
-
-	printk(KERN_INFO "PCIE initialization OK\n");
-
-	if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000))
-		printk(KERN_INFO "PESDR_PLLCT2 resistance calibration failed (0x%08x)\n",
-		       SDR_READ(PESDR0_PLLLCT2));
-
-	/* De-assert reset of PCIe PLL, wait for lock */
-	SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
-	udelay(3);
-
-	return 0;
-}
-
-int ppc440spe_init_pcie_rootport(int port)
-{
-	static int core_init;
-	void __iomem *utl_base;
-	u32 val = 0;
-	int i;
-
-	if (!core_init) {
-		++core_init;
-		i = ppc440spe_init_pcie();
-		if (i)
-			return i;
-	}
-
-	/*
-	 * Initialize various parts of the PCI Express core for our port:
-	 *
-	 * - Set as a root port and enable max width
-	 *   (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
-	 * - Set up UTL configuration.
-	 * - Increase SERDES drive strength to levels suggested by AMCC.
-	 * - De-assert RSTPYN, RSTDL and RSTGU.
-	 */
-	switch (port) {
-	case 0:
-		SDR_WRITE(PESDR0_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X8 << 12);
-
-		SDR_WRITE(PESDR0_UTLSET1, 0x21222222);
-		SDR_WRITE(PESDR0_UTLSET2, 0x11000000);
-
-		SDR_WRITE(PESDR0_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL3SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
-		SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
-
-		SDR_WRITE(PESDR0_RCSSET,
-			  (SDR_READ(PESDR0_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
-
-	case 1:
-		SDR_WRITE(PESDR1_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
-
-		SDR_WRITE(PESDR1_UTLSET1, 0x21222222);
-		SDR_WRITE(PESDR1_UTLSET2, 0x11000000);
-
-		SDR_WRITE(PESDR1_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR1_HSSL3SET1, 0x35000000);
-
-		SDR_WRITE(PESDR1_RCSSET,
-			  (SDR_READ(PESDR1_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
-
-	case 2:
-		SDR_WRITE(PESDR2_DLPSET, PTYPE_ROOT_PORT << 20 | LNKW_X4 << 12);
-
-		SDR_WRITE(PESDR2_UTLSET1, 0x21222222);
-		SDR_WRITE(PESDR2_UTLSET2, 0x11000000);
-
-		SDR_WRITE(PESDR2_HSSL0SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL1SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL2SET1, 0x35000000);
-		SDR_WRITE(PESDR2_HSSL3SET1, 0x35000000);
-
-		SDR_WRITE(PESDR2_RCSSET,
-			  (SDR_READ(PESDR2_RCSSET) & ~(1 << 24 | 1 << 16)) | 1 << 12);
-		break;
-	}
-
-	mdelay(1000);
-
-	switch (port) {
-	case 0: val = SDR_READ(PESDR0_RCSSTS); break;
-	case 1: val = SDR_READ(PESDR1_RCSSTS); break;
-	case 2: val = SDR_READ(PESDR2_RCSSTS); break;
-	}
-
-	if (!(val & (1 << 20)))
-		printk(KERN_INFO "PCIE%d: PGRST inactive\n", port);
-	else
-		printk(KERN_WARNING "PGRST for PCIE%d failed %08x\n", port, val);
-
-	switch (port) {
-	case 0: printk(KERN_INFO "PCIE0: LOOP %08x\n", SDR_READ(PESDR0_LOOP)); break;
-	case 1: printk(KERN_INFO "PCIE1: LOOP %08x\n", SDR_READ(PESDR1_LOOP)); break;
-	case 2: printk(KERN_INFO "PCIE2: LOOP %08x\n", SDR_READ(PESDR2_LOOP)); break;
-	}
-
-	/*
-	 * Map UTL registers at 0xc_1000_0n00
-	 */
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x10000000);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
-		break;
-
-	case 1:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x10001000);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
-		break;
-
-	case 2:
-		mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
-		mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x10002000);
-		mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
-		mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
-	}
-
-	utl_base = ioremap64(0xc10000000ull + 0x1000 * port, 0x100);
-
-	/*
-	 * Set buffer allocations and then assert VRB and TXE.
-	 */
-	out_be32(utl_base + PEUTL_OUTTR,   0x08000000);
-	out_be32(utl_base + PEUTL_INTR,    0x02000000);
-	out_be32(utl_base + PEUTL_OPDBSZ,  0x10000000);
-	out_be32(utl_base + PEUTL_PBBSZ,   0x53000000);
-	out_be32(utl_base + PEUTL_IPHBSZ,  0x08000000);
-	out_be32(utl_base + PEUTL_IPDBSZ,  0x10000000);
-	out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
-	out_be32(utl_base + PEUTL_PCTL,    0x80800066);
-
-	iounmap(utl_base);
-
-	/*
-	 * We map PCI Express configuration access into the 512MB regions
-	 *     PCIE0: 0xc_4000_0000
-	 *     PCIE1: 0xc_8000_0000
-	 *     PCIE2: 0xc_c000_0000
-	 */
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), 0x0000000c);
-		mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), 0x40000000);
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
-		break;
-
-	case 1:
-		mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), 0x0000000c);
-		mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), 0x80000000);
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
-		break;
-
-	case 2:
-		mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), 0x0000000c);
-		mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), 0xc0000000);
-		mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
-		break;
-	}
-
-	/*
-	 * Check for VC0 active and assert RDY.
-	 */
-	switch (port) {
-	case 0:
-		if (!(SDR_READ(PESDR0_RCSSTS) & (1 << 16)))
-			printk(KERN_WARNING "PCIE0: VC0 not active\n");
-		SDR_WRITE(PESDR0_RCSSET, SDR_READ(PESDR0_RCSSET) | 1 << 20);
-		break;
-	case 1:
-		if (!(SDR_READ(PESDR1_RCSSTS) & (1 << 16)))
-			printk(KERN_WARNING "PCIE0: VC0 not active\n");
-		SDR_WRITE(PESDR1_RCSSET, SDR_READ(PESDR1_RCSSET) | 1 << 20);
-		break;
-	case 2:
-		if (!(SDR_READ(PESDR2_RCSSTS) & (1 << 16)))
-			printk(KERN_WARNING "PCIE0: VC0 not active\n");
-		SDR_WRITE(PESDR2_RCSSET, SDR_READ(PESDR2_RCSSET) | 1 << 20);
-		break;
-	}
-
-#if 0
-	/* Dump all config regs */
-	for (i = 0x300; i <= 0x320; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-	for (i = 0x340; i <= 0x353; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-	for (i = 0x370; i <= 0x383; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-	for (i = 0x3a0; i <= 0x3a2; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-	for (i = 0x3c0; i <= 0x3c3; ++i)
-		printk("[%04x] 0x%08x\n", i, SDR_READ(i));
-#endif
-
-	mdelay(100);
-
-	return 0;
-}
-
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port)
-{
-	void __iomem *mbase;
-
-	/*
-	 * Map 16MB, which is enough for 4 bits of bus #
-	 */
-	hose->cfg_data = ioremap64(0xc40000000ull + port * 0x40000000,
-				   1 << 24);
-	hose->ops = &pcie_pci_ops;
-
-	/*
-	 * Set bus numbers on our root port
-	 */
-	mbase = ioremap64(0xc50000000ull + port * 0x40000000, 4096);
-	out_8(mbase + PCI_PRIMARY_BUS, 0);
-	out_8(mbase + PCI_SECONDARY_BUS, 0);
-
-	/*
-	 * Set up outbound translation to hose->mem_space from PLB
-	 * addresses at an offset of 0xd_0000_0000.  We set the low
-	 * bits of the mask to 11 to turn off splitting into 8
-	 * subregions and to enable the outbound translation.
-	 */
-	out_le32(mbase + PECFG_POM0LAH, 0);
-	out_le32(mbase + PECFG_POM0LAL, hose->mem_space.start);
-
-	switch (port) {
-	case 0:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0),  hose->mem_space.start);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
-		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
-		break;
-	case 1:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1),  hose->mem_space.start);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
-		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
-
-		break;
-	case 2:
-		mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2),  0x0000000d);
-		mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2),  hose->mem_space.start);
-		mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
-		mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
-		      ~(hose->mem_space.end - hose->mem_space.start) | 3);
-		break;
-	}
-
-	/* Set up 16GB inbound memory window at 0 */
-	out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
-	out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
-	out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffc);
-	out_le32(mbase + PECFG_BAR0LMPA, 0);
-	out_le32(mbase + PECFG_PIM0LAL, 0);
-	out_le32(mbase + PECFG_PIM0LAH, 0);
-	out_le32(mbase + PECFG_PIMEN, 0x1);
-
-	/* Enable I/O, Mem, and Busmaster cycles */
-	out_le16(mbase + PCI_COMMAND,
-		 in_le16(mbase + PCI_COMMAND) |
-		 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-
-	iounmap(mbase);
-}
diff --git a/arch/ppc/syslib/ppc440spe_pcie.h b/arch/ppc/syslib/ppc440spe_pcie.h
deleted file mode 100644
index 55b765ad3272..000000000000
--- a/arch/ppc/syslib/ppc440spe_pcie.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright (c) 2005 Cisco Systems.  All rights reserved.
- * Roland Dreier <rolandd@cisco.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#ifndef __PPC_SYSLIB_PPC440SPE_PCIE_H
-#define __PPC_SYSLIB_PPC440SPE_PCIE_H
-
-#define DCRN_SDR0_CFGADDR	0x00e
-#define DCRN_SDR0_CFGDATA	0x00f
-
-#define DCRN_PCIE0_BASE		0x100
-#define DCRN_PCIE1_BASE		0x120
-#define DCRN_PCIE2_BASE		0x140
-#define PCIE0			DCRN_PCIE0_BASE
-#define PCIE1			DCRN_PCIE1_BASE
-#define PCIE2			DCRN_PCIE2_BASE
-
-#define DCRN_PEGPL_CFGBAH(base)		(base + 0x00)
-#define DCRN_PEGPL_CFGBAL(base)		(base + 0x01)
-#define DCRN_PEGPL_CFGMSK(base)		(base + 0x02)
-#define DCRN_PEGPL_MSGBAH(base)		(base + 0x03)
-#define DCRN_PEGPL_MSGBAL(base)		(base + 0x04)
-#define DCRN_PEGPL_MSGMSK(base)		(base + 0x05)
-#define DCRN_PEGPL_OMR1BAH(base)	(base + 0x06)
-#define DCRN_PEGPL_OMR1BAL(base)	(base + 0x07)
-#define DCRN_PEGPL_OMR1MSKH(base)	(base + 0x08)
-#define DCRN_PEGPL_OMR1MSKL(base)	(base + 0x09)
-#define DCRN_PEGPL_REGBAH(base)		(base + 0x12)
-#define DCRN_PEGPL_REGBAL(base)		(base + 0x13)
-#define DCRN_PEGPL_REGMSK(base)		(base + 0x14)
-#define DCRN_PEGPL_SPECIAL(base)	(base + 0x15)
-
-/*
- * System DCRs (SDRs)
- */
-#define PESDR0_PLLLCT1		0x03a0
-#define PESDR0_PLLLCT2		0x03a1
-#define PESDR0_PLLLCT3		0x03a2
-
-#define PESDR0_UTLSET1		0x0300
-#define PESDR0_UTLSET2		0x0301
-#define PESDR0_DLPSET		0x0302
-#define PESDR0_LOOP		0x0303
-#define PESDR0_RCSSET		0x0304
-#define PESDR0_RCSSTS		0x0305
-#define PESDR0_HSSL0SET1	0x0306
-#define PESDR0_HSSL0SET2	0x0307
-#define PESDR0_HSSL0STS		0x0308
-#define PESDR0_HSSL1SET1	0x0309
-#define PESDR0_HSSL1SET2	0x030a
-#define PESDR0_HSSL1STS		0x030b
-#define PESDR0_HSSL2SET1	0x030c
-#define PESDR0_HSSL2SET2	0x030d
-#define PESDR0_HSSL2STS		0x030e
-#define PESDR0_HSSL3SET1	0x030f
-#define PESDR0_HSSL3SET2	0x0310
-#define PESDR0_HSSL3STS		0x0311
-#define PESDR0_HSSL4SET1	0x0312
-#define PESDR0_HSSL4SET2	0x0313
-#define PESDR0_HSSL4STS		0x0314
-#define PESDR0_HSSL5SET1	0x0315
-#define PESDR0_HSSL5SET2	0x0316
-#define PESDR0_HSSL5STS		0x0317
-#define PESDR0_HSSL6SET1	0x0318
-#define PESDR0_HSSL6SET2	0x0319
-#define PESDR0_HSSL6STS		0x031a
-#define PESDR0_HSSL7SET1	0x031b
-#define PESDR0_HSSL7SET2	0x031c
-#define PESDR0_HSSL7STS		0x031d
-#define PESDR0_HSSCTLSET	0x031e
-#define PESDR0_LANE_ABCD	0x031f
-#define PESDR0_LANE_EFGH	0x0320
-
-#define PESDR1_UTLSET1		0x0340
-#define PESDR1_UTLSET2		0x0341
-#define PESDR1_DLPSET		0x0342
-#define PESDR1_LOOP		0x0343
-#define PESDR1_RCSSET		0x0344
-#define PESDR1_RCSSTS		0x0345
-#define PESDR1_HSSL0SET1	0x0346
-#define PESDR1_HSSL0SET2	0x0347
-#define PESDR1_HSSL0STS		0x0348
-#define PESDR1_HSSL1SET1	0x0349
-#define PESDR1_HSSL1SET2	0x034a
-#define PESDR1_HSSL1STS		0x034b
-#define PESDR1_HSSL2SET1	0x034c
-#define PESDR1_HSSL2SET2	0x034d
-#define PESDR1_HSSL2STS		0x034e
-#define PESDR1_HSSL3SET1	0x034f
-#define PESDR1_HSSL3SET2	0x0350
-#define PESDR1_HSSL3STS		0x0351
-#define PESDR1_HSSCTLSET	0x0352
-#define PESDR1_LANE_ABCD	0x0353
-
-#define PESDR2_UTLSET1		0x0370
-#define PESDR2_UTLSET2		0x0371
-#define PESDR2_DLPSET		0x0372
-#define PESDR2_LOOP		0x0373
-#define PESDR2_RCSSET		0x0374
-#define PESDR2_RCSSTS		0x0375
-#define PESDR2_HSSL0SET1	0x0376
-#define PESDR2_HSSL0SET2	0x0377
-#define PESDR2_HSSL0STS		0x0378
-#define PESDR2_HSSL1SET1	0x0379
-#define PESDR2_HSSL1SET2	0x037a
-#define PESDR2_HSSL1STS		0x037b
-#define PESDR2_HSSL2SET1	0x037c
-#define PESDR2_HSSL2SET2	0x037d
-#define PESDR2_HSSL2STS		0x037e
-#define PESDR2_HSSL3SET1	0x037f
-#define PESDR2_HSSL3SET2	0x0380
-#define PESDR2_HSSL3STS		0x0381
-#define PESDR2_HSSCTLSET	0x0382
-#define PESDR2_LANE_ABCD	0x0383
-
-/*
- * UTL register offsets
- */
-#define PEUTL_PBBSZ		0x20
-#define PEUTL_OPDBSZ		0x68
-#define PEUTL_IPHBSZ		0x70
-#define PEUTL_IPDBSZ		0x78
-#define PEUTL_OUTTR		0x90
-#define PEUTL_INTR		0x98
-#define PEUTL_PCTL		0xa0
-#define PEUTL_RCIRQEN		0xb8
-
-/*
- * Config space register offsets
- */
-#define PECFG_BAR0LMPA		0x210
-#define PECFG_BAR0HMPA		0x214
-#define PECFG_PIMEN		0x33c
-#define PECFG_PIM0LAL		0x340
-#define PECFG_PIM0LAH		0x344
-#define PECFG_POM0LAL		0x380
-#define PECFG_POM0LAH		0x384
-
-int ppc440spe_init_pcie(void);
-int ppc440spe_init_pcie_rootport(int port);
-void ppc440spe_setup_pcie(struct pci_controller *hose, int port);
-
-#endif /* __PPC_SYSLIB_PPC440SPE_PCIE_H */
diff --git a/arch/ppc/syslib/ppc4xx_dma.c b/arch/ppc/syslib/ppc4xx_dma.c
deleted file mode 100644
index bd301868996b..000000000000
--- a/arch/ppc/syslib/ppc4xx_dma.c
+++ /dev/null
@@ -1,710 +0,0 @@
-/*
- * IBM PPC4xx DMA engine core library
- *
- * Copyright 2000-2004 MontaVista Software Inc.
- *
- * Cleaned up and converted to new DCR access
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Original code by Armin Kuster <akuster@mvista.com>
- * and Pete Popov <ppopov@mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/miscdevice.h>
-#include <linux/init.h>
-#include <linux/module.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/ppc4xx_dma.h>
-
-ppc_dma_ch_t dma_channels[MAX_PPC4xx_DMA_CHANNELS];
-
-int
-ppc4xx_get_dma_status(void)
-{
-	return (mfdcr(DCRN_DMASR));
-}
-
-void
-ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("set_src_addr: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef PPC4xx_DMA_64BIT
-	mtdcr(DCRN_DMASAH0 + dmanr*2, (u32)(src_addr >> 32));
-#else
-	mtdcr(DCRN_DMASA0 + dmanr*2, (u32)src_addr);
-#endif
-}
-
-void
-ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("set_dst_addr: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef PPC4xx_DMA_64BIT
-	mtdcr(DCRN_DMADAH0 + dmanr*2, (u32)(dst_addr >> 32));
-#else
-	mtdcr(DCRN_DMADA0 + dmanr*2, (u32)dst_addr);
-#endif
-}
-
-void
-ppc4xx_enable_dma(unsigned int dmanr)
-{
-	unsigned int control;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-	unsigned int status_bits[] = { DMA_CS0 | DMA_TS0 | DMA_CH0_ERR,
-				       DMA_CS1 | DMA_TS1 | DMA_CH1_ERR,
-				       DMA_CS2 | DMA_TS2 | DMA_CH2_ERR,
-				       DMA_CS3 | DMA_TS3 | DMA_CH3_ERR};
-
-	if (p_dma_ch->in_use) {
-		printk("enable_dma: channel %d in use\n", dmanr);
-		return;
-	}
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("enable_dma: bad channel: %d\n", dmanr);
-		return;
-	}
-
-	if (p_dma_ch->mode == DMA_MODE_READ) {
-		/* peripheral to memory */
-		ppc4xx_set_src_addr(dmanr, 0);
-		ppc4xx_set_dst_addr(dmanr, p_dma_ch->addr);
-	} else if (p_dma_ch->mode == DMA_MODE_WRITE) {
-		/* memory to peripheral */
-		ppc4xx_set_src_addr(dmanr, p_dma_ch->addr);
-		ppc4xx_set_dst_addr(dmanr, 0);
-	}
-
-	/* for other xfer modes, the addresses are already set */
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-
-	control &= ~(DMA_TM_MASK | DMA_TD);	/* clear all mode bits */
-	if (p_dma_ch->mode == DMA_MODE_MM) {
-		/* software initiated memory to memory */
-		control |= DMA_ETD_OUTPUT | DMA_TCE_ENABLE;
-	}
-
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	/*
-	 * Clear the CS, TS, RI bits for the channel from DMASR.  This
-	 * has been observed to happen correctly only after the mode and
-	 * ETD/DCE bits in DMACRx are set above.  Must do this before
-	 * enabling the channel.
-	 */
-
-	mtdcr(DCRN_DMASR, status_bits[dmanr]);
-
-	/*
-	 * For device-paced transfers, Terminal Count Enable apparently
-	 * must be on, and this must be turned on after the mode, etc.
-	 * bits are cleared above (at least on Redwood-6).
-	 */
-
-	if ((p_dma_ch->mode == DMA_MODE_MM_DEVATDST) ||
-	    (p_dma_ch->mode == DMA_MODE_MM_DEVATSRC))
-		control |= DMA_TCE_ENABLE;
-
-	/*
-	 * Now enable the channel.
-	 */
-
-	control |= (p_dma_ch->mode | DMA_CE_ENABLE);
-
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	p_dma_ch->in_use = 1;
-}
-
-void
-ppc4xx_disable_dma(unsigned int dmanr)
-{
-	unsigned int control;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (!p_dma_ch->in_use) {
-		printk("disable_dma: channel %d not in use\n", dmanr);
-		return;
-	}
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("disable_dma: bad channel: %d\n", dmanr);
-		return;
-	}
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-	control &= ~DMA_CE_ENABLE;
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	p_dma_ch->in_use = 0;
-}
-
-/*
- * Sets the dma mode for single DMA transfers only.
- * For scatter/gather transfers, the mode is passed to the
- * alloc_dma_handle() function as one of the parameters.
- *
- * The mode is simply saved and used later.  This allows
- * the driver to call set_dma_mode() and set_dma_addr() in
- * any order.
- *
- * Valid mode values are:
- *
- * DMA_MODE_READ          peripheral to memory
- * DMA_MODE_WRITE         memory to peripheral
- * DMA_MODE_MM            memory to memory
- * DMA_MODE_MM_DEVATSRC   device-paced memory to memory, device at src
- * DMA_MODE_MM_DEVATDST   device-paced memory to memory, device at dst
- */
-int
-ppc4xx_set_dma_mode(unsigned int dmanr, unsigned int mode)
-{
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("set_dma_mode: bad channel 0x%x\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	p_dma_ch->mode = mode;
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Sets the DMA Count register. Note that 'count' is in bytes.
- * However, the DMA Count register counts the number of "transfers",
- * where each transfer is equal to the bus width.  Thus, count
- * MUST be a multiple of the bus width.
- */
-void
-ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count)
-{
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-#ifdef DEBUG_4xxDMA
-	{
-		int error = 0;
-		switch (p_dma_ch->pwidth) {
-		case PW_8:
-			break;
-		case PW_16:
-			if (count & 0x1)
-				error = 1;
-			break;
-		case PW_32:
-			if (count & 0x3)
-				error = 1;
-			break;
-		case PW_64:
-			if (count & 0x7)
-				error = 1;
-			break;
-		default:
-			printk("set_dma_count: invalid bus width: 0x%x\n",
-			       p_dma_ch->pwidth);
-			return;
-		}
-		if (error)
-			printk
-			    ("Warning: set_dma_count count 0x%x bus width %d\n",
-			     count, p_dma_ch->pwidth);
-	}
-#endif
-
-	count = count >> p_dma_ch->shift;
-
-	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), count);
-}
-
-/*
- *   Returns the number of bytes left to be transferred.
- *   After a DMA transfer, this should return zero.
- *   Reading this while a DMA transfer is still in progress will return
- *   unpredictable results.
- */
-int
-ppc4xx_get_dma_residue(unsigned int dmanr)
-{
-	unsigned int count;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_get_dma_residue: bad channel 0x%x\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	count = mfdcr(DCRN_DMACT0 + (dmanr * 0x8));
-
-	return (count << p_dma_ch->shift);
-}
-
-/*
- * Sets the DMA address for a memory to peripheral or peripheral
- * to memory transfer.  The address is just saved in the channel
- * structure for now and used later in enable_dma().
- */
-void
-ppc4xx_set_dma_addr(unsigned int dmanr, phys_addr_t addr)
-{
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_set_dma_addr: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef DEBUG_4xxDMA
-	{
-		int error = 0;
-		switch (p_dma_ch->pwidth) {
-		case PW_8:
-			break;
-		case PW_16:
-			if ((unsigned) addr & 0x1)
-				error = 1;
-			break;
-		case PW_32:
-			if ((unsigned) addr & 0x3)
-				error = 1;
-			break;
-		case PW_64:
-			if ((unsigned) addr & 0x7)
-				error = 1;
-			break;
-		default:
-			printk("ppc4xx_set_dma_addr: invalid bus width: 0x%x\n",
-			       p_dma_ch->pwidth);
-			return;
-		}
-		if (error)
-			printk("Warning: ppc4xx_set_dma_addr addr 0x%x bus width %d\n",
-			       addr, p_dma_ch->pwidth);
-	}
-#endif
-
-	/* save dma address and program it later after we know the xfer mode */
-	p_dma_ch->addr = addr;
-}
-
-/*
- * Sets both DMA addresses for a memory to memory transfer.
- * For memory to peripheral or peripheral to memory transfers
- * the function set_dma_addr() should be used instead.
- */
-void
-ppc4xx_set_dma_addr2(unsigned int dmanr, phys_addr_t src_dma_addr,
-		     phys_addr_t dst_dma_addr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_set_dma_addr2: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef DEBUG_4xxDMA
-	{
-		ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-		int error = 0;
-		switch (p_dma_ch->pwidth) {
-			case PW_8:
-				break;
-			case PW_16:
-				if (((unsigned) src_dma_addr & 0x1) ||
-						((unsigned) dst_dma_addr & 0x1)
-				   )
-					error = 1;
-				break;
-			case PW_32:
-				if (((unsigned) src_dma_addr & 0x3) ||
-						((unsigned) dst_dma_addr & 0x3)
-				   )
-					error = 1;
-				break;
-			case PW_64:
-				if (((unsigned) src_dma_addr & 0x7) ||
-						((unsigned) dst_dma_addr & 0x7)
-				   )
-					error = 1;
-				break;
-			default:
-				printk("ppc4xx_set_dma_addr2: invalid bus width: 0x%x\n",
-						p_dma_ch->pwidth);
-				return;
-		}
-		if (error)
-			printk
-				("Warning: ppc4xx_set_dma_addr2 src 0x%x dst 0x%x bus width %d\n",
-				 src_dma_addr, dst_dma_addr, p_dma_ch->pwidth);
-	}
-#endif
-
-	ppc4xx_set_src_addr(dmanr, src_dma_addr);
-	ppc4xx_set_dst_addr(dmanr, dst_dma_addr);
-}
-
-/*
- * Enables the channel interrupt.
- *
- * If performing a scatter/gatter transfer, this function
- * MUST be called before calling alloc_dma_handle() and building
- * the sgl list.  Otherwise, interrupts will not be enabled, if
- * they were previously disabled.
- */
-int
-ppc4xx_enable_dma_interrupt(unsigned int dmanr)
-{
-	unsigned int control;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_enable_dma_interrupt: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	p_dma_ch->int_enable = 1;
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-	control |= DMA_CIE_ENABLE;	/* Channel Interrupt Enable */
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Disables the channel interrupt.
- *
- * If performing a scatter/gatter transfer, this function
- * MUST be called before calling alloc_dma_handle() and building
- * the sgl list.  Otherwise, interrupts will not be disabled, if
- * they were previously enabled.
- */
-int
-ppc4xx_disable_dma_interrupt(unsigned int dmanr)
-{
-	unsigned int control;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_disable_dma_interrupt: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	p_dma_ch->int_enable = 0;
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-	control &= ~DMA_CIE_ENABLE;	/* Channel Interrupt Enable */
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Configures a DMA channel, including the peripheral bus width, if a
- * peripheral is attached to the channel, the polarity of the DMAReq and
- * DMAAck signals, etc.  This information should really be setup by the boot
- * code, since most likely the configuration won't change dynamically.
- * If the kernel has to call this function, it's recommended that it's
- * called from platform specific init code.  The driver should not need to
- * call this function.
- */
-int
-ppc4xx_init_dma_channel(unsigned int dmanr, ppc_dma_ch_t * p_init)
-{
-	unsigned int polarity;
-	uint32_t control = 0;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-
-	DMA_MODE_READ = (unsigned long) DMA_TD;	/* Peripheral to Memory */
-	DMA_MODE_WRITE = 0;	/* Memory to Peripheral */
-
-	if (!p_init) {
-		printk("ppc4xx_init_dma_channel: NULL p_init\n");
-		return DMA_STATUS_NULL_POINTER;
-	}
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_init_dma_channel: bad channel %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-#if DCRN_POL > 0
-	polarity = mfdcr(DCRN_POL);
-#else
-	polarity = 0;
-#endif
-
-	/* Setup the control register based on the values passed to
-	 * us in p_init.  Then, over-write the control register with this
-	 * new value.
-	 */
-	control |= SET_DMA_CONTROL;
-
-	/* clear all polarity signals and then "or" in new signal levels */
-	polarity &= ~GET_DMA_POLARITY(dmanr);
-	polarity |= p_init->polarity;
-#if DCRN_POL > 0
-	mtdcr(DCRN_POL, polarity);
-#endif
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	/* save these values in our dma channel structure */
-	memcpy(p_dma_ch, p_init, sizeof (ppc_dma_ch_t));
-
-	/*
-	 * The peripheral width values written in the control register are:
-	 *   PW_8                 0
-	 *   PW_16                1
-	 *   PW_32                2
-	 *   PW_64                3
-	 *
-	 *   Since the DMA count register takes the number of "transfers",
-	 *   we need to divide the count sent to us in certain
-	 *   functions by the appropriate number.  It so happens that our
-	 *   right shift value is equal to the peripheral width value.
-	 */
-	p_dma_ch->shift = p_init->pwidth;
-
-	/*
-	 * Save the control word for easy access.
-	 */
-	p_dma_ch->control = control;
-
-	mtdcr(DCRN_DMASR, 0xffffffff);	/* clear status register */
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * This function returns the channel configuration.
- */
-int
-ppc4xx_get_channel_config(unsigned int dmanr, ppc_dma_ch_t * p_dma_ch)
-{
-	unsigned int polarity;
-	unsigned int control;
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_get_channel_config: bad channel %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	memcpy(p_dma_ch, &dma_channels[dmanr], sizeof (ppc_dma_ch_t));
-
-#if DCRN_POL > 0
-	polarity = mfdcr(DCRN_POL);
-#else
-	polarity = 0;
-#endif
-
-	p_dma_ch->polarity = polarity & GET_DMA_POLARITY(dmanr);
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-
-	p_dma_ch->cp = GET_DMA_PRIORITY(control);
-	p_dma_ch->pwidth = GET_DMA_PW(control);
-	p_dma_ch->psc = GET_DMA_PSC(control);
-	p_dma_ch->pwc = GET_DMA_PWC(control);
-	p_dma_ch->phc = GET_DMA_PHC(control);
-	p_dma_ch->ce = GET_DMA_CE_ENABLE(control);
-	p_dma_ch->int_enable = GET_DMA_CIE_ENABLE(control);
-	p_dma_ch->shift = GET_DMA_PW(control);
-
-#ifdef CONFIG_PPC4xx_EDMA
-	p_dma_ch->pf = GET_DMA_PREFETCH(control);
-#else
-	p_dma_ch->ch_enable = GET_DMA_CH(control);
-	p_dma_ch->ece_enable = GET_DMA_ECE(control);
-	p_dma_ch->tcd_disable = GET_DMA_TCD(control);
-#endif
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Sets the priority for the DMA channel dmanr.
- * Since this is setup by the hardware init function, this function
- * can be used to dynamically change the priority of a channel.
- *
- * Acceptable priorities:
- *
- * PRIORITY_LOW
- * PRIORITY_MID_LOW
- * PRIORITY_MID_HIGH
- * PRIORITY_HIGH
- *
- */
-int
-ppc4xx_set_channel_priority(unsigned int dmanr, unsigned int priority)
-{
-	unsigned int control;
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_set_channel_priority: bad channel %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	if ((priority != PRIORITY_LOW) &&
-	    (priority != PRIORITY_MID_LOW) &&
-	    (priority != PRIORITY_MID_HIGH) && (priority != PRIORITY_HIGH)) {
-		printk("ppc4xx_set_channel_priority: bad priority: 0x%x\n", priority);
-	}
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-	control |= SET_DMA_PRIORITY(priority);
-	mtdcr(DCRN_DMACR0 + (dmanr * 0x8), control);
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Returns the width of the peripheral attached to this channel. This assumes
- * that someone who knows the hardware configuration, boot code or some other
- * init code, already set the width.
- *
- * The return value is one of:
- *   PW_8
- *   PW_16
- *   PW_32
- *   PW_64
- *
- *   The function returns 0 on error.
- */
-unsigned int
-ppc4xx_get_peripheral_width(unsigned int dmanr)
-{
-	unsigned int control;
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_get_peripheral_width: bad channel %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	control = mfdcr(DCRN_DMACR0 + (dmanr * 0x8));
-
-	return (GET_DMA_PW(control));
-}
-
-/*
- * Clears the channel status bits
- */
-int
-ppc4xx_clr_dma_status(unsigned int dmanr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk(KERN_ERR "ppc4xx_clr_dma_status: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-	mtdcr(DCRN_DMASR, ((u32)DMA_CH0_ERR | (u32)DMA_CS0 | (u32)DMA_TS0) >> dmanr);
-	return DMA_STATUS_GOOD;
-}
-
-#ifdef CONFIG_PPC4xx_EDMA
-/*
- * Enables the burst on the channel (BTEN bit in the control/count register)
- * Note:
- * For scatter/gather dma, this function MUST be called before the
- * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
- * sgl list and used as each sgl element is added.
- */
-int
-ppc4xx_enable_burst(unsigned int dmanr)
-{
-	unsigned int ctc;
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk(KERN_ERR "ppc4xx_enable_burst: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-        ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) | DMA_CTC_BTEN;
-	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
-	return DMA_STATUS_GOOD;
-}
-/*
- * Disables the burst on the channel (BTEN bit in the control/count register)
- * Note:
- * For scatter/gather dma, this function MUST be called before the
- * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
- * sgl list and used as each sgl element is added.
- */
-int
-ppc4xx_disable_burst(unsigned int dmanr)
-{
-	unsigned int ctc;
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk(KERN_ERR "ppc4xx_disable_burst: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-	ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) &~ DMA_CTC_BTEN;
-	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
-	return DMA_STATUS_GOOD;
-}
-/*
- * Sets the burst size (number of peripheral widths) for the channel
- * (BSIZ bits in the control/count register))
- * must be one of:
- *    DMA_CTC_BSIZ_2
- *    DMA_CTC_BSIZ_4
- *    DMA_CTC_BSIZ_8
- *    DMA_CTC_BSIZ_16
- * Note:
- * For scatter/gather dma, this function MUST be called before the
- * ppc4xx_alloc_dma_handle() func as the chan count register is copied into the
- * sgl list and used as each sgl element is added.
- */
-int
-ppc4xx_set_burst_size(unsigned int dmanr, unsigned int bsize)
-{
-	unsigned int ctc;
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk(KERN_ERR "ppc4xx_set_burst_size: bad channel: %d\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-	ctc = mfdcr(DCRN_DMACT0 + (dmanr * 0x8)) &~ DMA_CTC_BSIZ_MSK;
-	ctc |= (bsize & DMA_CTC_BSIZ_MSK);
-	mtdcr(DCRN_DMACT0 + (dmanr * 0x8), ctc);
-	return DMA_STATUS_GOOD;
-}
-
-EXPORT_SYMBOL(ppc4xx_enable_burst);
-EXPORT_SYMBOL(ppc4xx_disable_burst);
-EXPORT_SYMBOL(ppc4xx_set_burst_size);
-#endif /* CONFIG_PPC4xx_EDMA */
-
-EXPORT_SYMBOL(ppc4xx_init_dma_channel);
-EXPORT_SYMBOL(ppc4xx_get_channel_config);
-EXPORT_SYMBOL(ppc4xx_set_channel_priority);
-EXPORT_SYMBOL(ppc4xx_get_peripheral_width);
-EXPORT_SYMBOL(dma_channels);
-EXPORT_SYMBOL(ppc4xx_set_src_addr);
-EXPORT_SYMBOL(ppc4xx_set_dst_addr);
-EXPORT_SYMBOL(ppc4xx_set_dma_addr);
-EXPORT_SYMBOL(ppc4xx_set_dma_addr2);
-EXPORT_SYMBOL(ppc4xx_enable_dma);
-EXPORT_SYMBOL(ppc4xx_disable_dma);
-EXPORT_SYMBOL(ppc4xx_set_dma_mode);
-EXPORT_SYMBOL(ppc4xx_set_dma_count);
-EXPORT_SYMBOL(ppc4xx_get_dma_residue);
-EXPORT_SYMBOL(ppc4xx_enable_dma_interrupt);
-EXPORT_SYMBOL(ppc4xx_disable_dma_interrupt);
-EXPORT_SYMBOL(ppc4xx_get_dma_status);
-EXPORT_SYMBOL(ppc4xx_clr_dma_status);
-
diff --git a/arch/ppc/syslib/ppc4xx_pic.c b/arch/ppc/syslib/ppc4xx_pic.c
deleted file mode 100644
index ee0da4b4b993..000000000000
--- a/arch/ppc/syslib/ppc4xx_pic.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Interrupt controller driver for PowerPC 4xx-based processors.
- *
- * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
- * Copyright (c) 2004, 2005 Zultys Technologies
- *
- * Based on original code by
- *    Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
- *    Armin Custer <akuster@mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
-*/
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/stddef.h>
-
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/machdep.h>
-
-/* See comment in include/arch-ppc/ppc4xx_pic.h
- * for more info about these two variables
- */
-extern struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[NR_UICS]
-    __attribute__ ((weak));
-extern unsigned char ppc4xx_uic_ext_irq_cfg[] __attribute__ ((weak));
-
-#define IRQ_MASK_UIC0(irq)		(1 << (31 - (irq)))
-#define IRQ_MASK_UICx(irq)		(1 << (31 - ((irq) & 0x1f)))
-#define IRQ_MASK_UIC1(irq)		IRQ_MASK_UICx(irq)
-#define IRQ_MASK_UIC2(irq)		IRQ_MASK_UICx(irq)
-#define IRQ_MASK_UIC3(irq)		IRQ_MASK_UICx(irq)
-
-#define UIC_HANDLERS(n)							\
-static void ppc4xx_uic##n##_enable(unsigned int irq)			\
-{									\
-	u32 mask = IRQ_MASK_UIC##n(irq);				\
-	if (irq_desc[irq].status & IRQ_LEVEL)				\
-		mtdcr(DCRN_UIC_SR(UIC##n), mask);			\
-	ppc_cached_irq_mask[n] |= mask;					\
-	mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);		\
-}									\
-									\
-static void ppc4xx_uic##n##_disable(unsigned int irq)			\
-{									\
-	ppc_cached_irq_mask[n] &= ~IRQ_MASK_UIC##n(irq);		\
-	mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);		\
-	ACK_UIC##n##_PARENT						\
-}									\
-									\
-static void ppc4xx_uic##n##_ack(unsigned int irq)			\
-{									\
-	u32 mask = IRQ_MASK_UIC##n(irq);				\
-	ppc_cached_irq_mask[n] &= ~mask;				\
-	mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);		\
-	mtdcr(DCRN_UIC_SR(UIC##n), mask);				\
-	ACK_UIC##n##_PARENT						\
-}									\
-									\
-static void ppc4xx_uic##n##_end(unsigned int irq)			\
-{									\
-	unsigned int status = irq_desc[irq].status;			\
-	u32 mask = IRQ_MASK_UIC##n(irq);				\
-	if (status & IRQ_LEVEL) {					\
-		mtdcr(DCRN_UIC_SR(UIC##n), mask);			\
-		ACK_UIC##n##_PARENT					\
-	}								\
-	if (!(status & (IRQ_DISABLED | IRQ_INPROGRESS))) {		\
-		ppc_cached_irq_mask[n] |= mask;				\
-		mtdcr(DCRN_UIC_ER(UIC##n), ppc_cached_irq_mask[n]);	\
-	}								\
-}
-
-#define DECLARE_UIC(n)							\
-{									\
-	.typename 	= "UIC"#n,					\
-	.enable 	= ppc4xx_uic##n##_enable,			\
-	.disable 	= ppc4xx_uic##n##_disable,			\
-	.ack 		= ppc4xx_uic##n##_ack,				\
-	.end 		= ppc4xx_uic##n##_end,				\
-}									\
-
-#if NR_UICS == 4
-#define ACK_UIC0_PARENT
-#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
-#define ACK_UIC2_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC2NC);
-#define ACK_UIC3_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC3NC);
-UIC_HANDLERS(0);
-UIC_HANDLERS(1);
-UIC_HANDLERS(2);
-UIC_HANDLERS(3);
-
-static int ppc4xx_pic_get_irq(void)
-{
-	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
-	if (uic0 & UIC0_UIC1NC)
-		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
-	else if (uic0 & UIC0_UIC2NC)
-		return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2)));
-	else if (uic0 & UIC0_UIC3NC)
-		return 128 - ffs(mfdcr(DCRN_UIC_MSR(UIC3)));
-	else
-		return uic0 ? 32 - ffs(uic0) : -1;
-}
-
-static void __init ppc4xx_pic_impl_init(void)
-{
-	/* Enable cascade interrupts in UIC0 */
-	ppc_cached_irq_mask[0] |= UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC;
-	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC | UIC0_UIC2NC | UIC0_UIC3NC);
-	mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]);
-}
-
-#elif NR_UICS == 3
-#define ACK_UIC0_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC0NC);
-#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC1NC);
-#define ACK_UIC2_PARENT	mtdcr(DCRN_UIC_SR(UICB), UICB_UIC2NC);
-UIC_HANDLERS(0);
-UIC_HANDLERS(1);
-UIC_HANDLERS(2);
-
-static int ppc4xx_pic_get_irq(void)
-{
-	u32 uicb = mfdcr(DCRN_UIC_MSR(UICB));
-	if (uicb & UICB_UIC0NC)
-		return 32 - ffs(mfdcr(DCRN_UIC_MSR(UIC0)));
-	else if (uicb & UICB_UIC1NC)
-		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
-	else if (uicb & UICB_UIC2NC)
-		return 96 - ffs(mfdcr(DCRN_UIC_MSR(UIC2)));
-	else
-		return -1;
-}
-
-static void __init ppc4xx_pic_impl_init(void)
-{
-#if defined(CONFIG_440GX)
-	/* Disable 440GP compatibility mode if it was enabled in firmware */
-	SDR_WRITE(DCRN_SDR_MFR, SDR_READ(DCRN_SDR_MFR) & ~DCRN_SDR_MFR_PCM);
-#endif
-	/* Configure Base UIC */
-	mtdcr(DCRN_UIC_CR(UICB), 0);
-	mtdcr(DCRN_UIC_TR(UICB), 0);
-	mtdcr(DCRN_UIC_PR(UICB), 0xffffffff);
-	mtdcr(DCRN_UIC_SR(UICB), 0xffffffff);
-	mtdcr(DCRN_UIC_ER(UICB), UICB_UIC0NC | UICB_UIC1NC | UICB_UIC2NC);
-}
-
-#elif NR_UICS == 2
-#define ACK_UIC0_PARENT
-#define ACK_UIC1_PARENT	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
-UIC_HANDLERS(0);
-UIC_HANDLERS(1);
-
-static int ppc4xx_pic_get_irq(void)
-{
-	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
-	if (uic0 & UIC0_UIC1NC)
-		return 64 - ffs(mfdcr(DCRN_UIC_MSR(UIC1)));
-	else
-		return uic0 ? 32 - ffs(uic0) : -1;
-}
-
-static void __init ppc4xx_pic_impl_init(void)
-{
-	/* Enable cascade interrupt in UIC0 */
-	ppc_cached_irq_mask[0] |= UIC0_UIC1NC;
-	mtdcr(DCRN_UIC_SR(UIC0), UIC0_UIC1NC);
-	mtdcr(DCRN_UIC_ER(UIC0), ppc_cached_irq_mask[0]);
-}
-
-#elif NR_UICS == 1
-#define ACK_UIC0_PARENT
-UIC_HANDLERS(0);
-
-static int ppc4xx_pic_get_irq(void)
-{
-	u32 uic0 = mfdcr(DCRN_UIC_MSR(UIC0));
-	return uic0 ? 32 - ffs(uic0) : -1;
-}
-
-static inline void ppc4xx_pic_impl_init(void)
-{
-}
-#endif
-
-static struct ppc4xx_uic_impl {
-	struct hw_interrupt_type decl;
-	int base;			/* Base DCR number */
-} __uic[] = {
-	{ .decl = DECLARE_UIC(0), .base = UIC0 },
-#if NR_UICS > 1
-	{ .decl = DECLARE_UIC(1), .base = UIC1 },
-#if NR_UICS > 2
-	{ .decl = DECLARE_UIC(2), .base = UIC2 },
-#if NR_UICS > 3
-	{ .decl = DECLARE_UIC(3), .base = UIC3 },
-#endif
-#endif
-#endif
-};
-
-static inline int is_level_sensitive(int irq)
-{
-	u32 tr = mfdcr(DCRN_UIC_TR(__uic[irq >> 5].base));
-	return (tr & IRQ_MASK_UICx(irq)) == 0;
-}
-
-void __init ppc4xx_pic_init(void)
-{
-	int i;
-	unsigned char *eirqs = ppc4xx_uic_ext_irq_cfg;
-
-	for (i = 0; i < NR_UICS; ++i) {
-		int base = __uic[i].base;
-
-		/* Disable everything by default */
-		ppc_cached_irq_mask[i] = 0;
-		mtdcr(DCRN_UIC_ER(base), 0);
-
-		/* We don't use critical interrupts */
-		mtdcr(DCRN_UIC_CR(base), 0);
-
-		/* Configure polarity and triggering */
-		if (ppc4xx_core_uic_cfg) {
-			struct ppc4xx_uic_settings *p = ppc4xx_core_uic_cfg + i;
-			u32 mask = p->ext_irq_mask;
-			u32 pr = mfdcr(DCRN_UIC_PR(base)) & mask;
-			u32 tr = mfdcr(DCRN_UIC_TR(base)) & mask;
-
-			/* "Fixed" interrupts (on-chip devices) */
-			pr |= p->polarity & ~mask;
-			tr |= p->triggering & ~mask;
-
-			/* Merge external IRQs settings if board port
-			 * provided them
-			 */
-			if (eirqs && mask) {
-				pr &= ~mask;
-				tr &= ~mask;
-				while (mask) {
-					/* Extract current external IRQ mask */
-					u32 eirq_mask = 1 << __ilog2(mask);
-
-					if (!(*eirqs & IRQ_SENSE_LEVEL))
-						tr |= eirq_mask;
-
-					if (*eirqs & IRQ_POLARITY_POSITIVE)
-						pr |= eirq_mask;
-
-					mask &= ~eirq_mask;
-					++eirqs;
-				}
-			}
-			mtdcr(DCRN_UIC_PR(base), pr);
-			mtdcr(DCRN_UIC_TR(base), tr);
-		}
-
-		/* ACK any pending interrupts to prevent false
-		 * triggering after first enable
-		 */
-		mtdcr(DCRN_UIC_SR(base), 0xffffffff);
-	}
-
-	/* Perform optional implementation specific setup
-	 * (e.g. enable cascade interrupts for multi-UIC configurations)
-	 */
-	ppc4xx_pic_impl_init();
-
-	/* Attach low-level handlers */
-	for (i = 0; i < (NR_UICS << 5); ++i) {
-		irq_desc[i].chip = &__uic[i >> 5].decl;
-		if (is_level_sensitive(i))
-			irq_desc[i].status |= IRQ_LEVEL;
-	}
-
-	ppc_md.get_irq = ppc4xx_pic_get_irq;
-}
diff --git a/arch/ppc/syslib/ppc4xx_setup.c b/arch/ppc/syslib/ppc4xx_setup.c
deleted file mode 100644
index 353d746b47e1..000000000000
--- a/arch/ppc/syslib/ppc4xx_setup.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- *
- *    Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
- *
- *    Copyright 2000-2001 MontaVista Software Inc.
- *      Completed implementation.
- *      Author: MontaVista Software, Inc.  <source@mvista.com>
- *              Frank Rowand <frank_rowand@mvista.com>
- *              Debbie Chu   <debbie_chu@mvista.com>
- *	Further modifications by Armin Kuster
- *
- *    Module name: ppc4xx_setup.c
- *
- */
-
-#include <linux/init.h>
-#include <linux/smp.h>
-#include <linux/threads.h>
-#include <linux/spinlock.h>
-#include <linux/reboot.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/initrd.h>
-#include <linux/pci.h>
-#include <linux/rtc.h>
-#include <linux/console.h>
-#include <linux/serial_reg.h>
-#include <linux/seq_file.h>
-
-#include <asm/system.h>
-#include <asm/processor.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/kgdb.h>
-#include <asm/ibm4xx.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-#include <asm/ppc4xx_pic.h>
-#include <asm/pci-bridge.h>
-#include <asm/bootinfo.h>
-
-#include <syslib/gen550.h>
-
-/* Function Prototypes */
-extern void abort(void);
-extern void ppc4xx_find_bridges(void);
-
-/* Global Variables */
-bd_t __res;
-
-void __init
-ppc4xx_setup_arch(void)
-{
-#if !defined(CONFIG_BDI_SWITCH)
-	/*
-	 * The Abatron BDI JTAG debugger does not tolerate others
-	 * mucking with the debug registers.
-	 */
-        mtspr(SPRN_DBCR0, (DBCR0_IDM));
-	mtspr(SPRN_DBSR, 0xffffffff);
-#endif
-
-	/* Setup PCI host bridges */
-#ifdef CONFIG_PCI
-	ppc4xx_find_bridges();
-#endif
-}
-
-/*
- *   This routine pretty-prints the platform's internal CPU clock
- *   frequencies into the buffer for usage in /proc/cpuinfo.
- */
-
-static int
-ppc4xx_show_percpuinfo(struct seq_file *m, int i)
-{
-	seq_printf(m, "clock\t\t: %ldMHz\n", (long)__res.bi_intfreq / 1000000);
-
-	return 0;
-}
-
-/*
- *   This routine pretty-prints the platform's internal bus clock
- *   frequencies into the buffer for usage in /proc/cpuinfo.
- */
-static int
-ppc4xx_show_cpuinfo(struct seq_file *m)
-{
-	bd_t *bip = &__res;
-
-	seq_printf(m, "machine\t\t: %s\n", PPC4xx_MACHINE_NAME);
-	seq_printf(m, "plb bus clock\t: %ldMHz\n",
-		   (long) bip->bi_busfreq / 1000000);
-#ifdef CONFIG_PCI
-	seq_printf(m, "pci bus clock\t: %dMHz\n",
-		   bip->bi_pci_busfreq / 1000000);
-#endif
-
-	return 0;
-}
-
-/*
- * Return the virtual address representing the top of physical RAM.
- */
-static unsigned long __init
-ppc4xx_find_end_of_memory(void)
-{
-	return ((unsigned long) __res.bi_memsize);
-}
-
-void __init
-ppc4xx_map_io(void)
-{
-	io_block_mapping(PPC4xx_ONB_IO_VADDR,
-			 PPC4xx_ONB_IO_PADDR, PPC4xx_ONB_IO_SIZE, _PAGE_IO);
-#ifdef CONFIG_PCI
-	io_block_mapping(PPC4xx_PCI_IO_VADDR,
-			 PPC4xx_PCI_IO_PADDR, PPC4xx_PCI_IO_SIZE, _PAGE_IO);
-	io_block_mapping(PPC4xx_PCI_CFG_VADDR,
-			 PPC4xx_PCI_CFG_PADDR, PPC4xx_PCI_CFG_SIZE, _PAGE_IO);
-	io_block_mapping(PPC4xx_PCI_LCFG_VADDR,
-			 PPC4xx_PCI_LCFG_PADDR, PPC4xx_PCI_LCFG_SIZE, _PAGE_IO);
-#endif
-}
-
-void __init
-ppc4xx_init_IRQ(void)
-{
-	ppc4xx_pic_init();
-}
-
-static void
-ppc4xx_restart(char *cmd)
-{
-	printk("%s\n", cmd);
-	abort();
-}
-
-static void
-ppc4xx_power_off(void)
-{
-	printk("System Halted\n");
-	local_irq_disable();
-	while (1) ;
-}
-
-static void
-ppc4xx_halt(void)
-{
-	printk("System Halted\n");
-	local_irq_disable();
-	while (1) ;
-}
-
-/*
- * This routine retrieves the internal processor frequency from the board
- * information structure, sets up the kernel timer decrementer based on
- * that value, enables the 4xx programmable interval timer (PIT) and sets
- * it up for auto-reload.
- */
-static void __init
-ppc4xx_calibrate_decr(void)
-{
-	unsigned int freq;
-	bd_t *bip = &__res;
-
-#if defined(CONFIG_WALNUT) || defined(CONFIG_SYCAMORE)
-	/* Walnut boot rom sets DCR CHCR1 (aka CPC0_CR1) bit CETE to 1 */
-	mtdcr(DCRN_CHCR1, mfdcr(DCRN_CHCR1) & ~CHR1_CETE);
-#endif
-	freq = bip->bi_tbfreq;
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	/* Set the time base to zero.
-	   ** At 200 Mhz, time base will rollover in ~2925 years.
-	 */
-
-	mtspr(SPRN_TBWL, 0);
-	mtspr(SPRN_TBWU, 0);
-
-	/* Clear any pending timer interrupts */
-
-	mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_PIS | TSR_FIS);
-	mtspr(SPRN_TCR, TCR_PIE | TCR_ARE);
-
-	/* Set the PIT reload value and just let it run. */
-	mtspr(SPRN_PIT, tb_ticks_per_jiffy);
-}
-
-TODC_ALLOC();
-
-/*
- * Input(s):
- *   r3 - Optional pointer to a board information structure.
- *   r4 - Optional pointer to the physical starting address of the init RAM
- *        disk.
- *   r5 - Optional pointer to the physical ending address of the init RAM
- *        disk.
- *   r6 - Optional pointer to the physical starting address of any kernel
- *        command-line parameters.
- *   r7 - Optional pointer to the physical ending address of any kernel
- *        command-line parameters.
- */
-void __init
-ppc4xx_init(unsigned long r3, unsigned long r4, unsigned long r5,
-	    unsigned long r6, unsigned long r7)
-{
-	parse_bootinfo(find_bootinfo());
-
-	/*
-	 * If we were passed in a board information, copy it into the
-	 * residual data area.
-	 */
-	if (r3)
-		__res = *(bd_t *)(r3 + KERNELBASE);
-
-#if defined(CONFIG_BLK_DEV_INITRD)
-	/*
-	 * If the init RAM disk has been configured in, and there's a valid
-	 * starting address for it, set it up.
-	 */
-	if (r4) {
-		initrd_start = r4 + KERNELBASE;
-		initrd_end = r5 + KERNELBASE;
-	}
-#endif				/* CONFIG_BLK_DEV_INITRD */
-
-	/* Copy the kernel command line arguments to a safe place. */
-
-	if (r6) {
-		*(char *) (r7 + KERNELBASE) = 0;
-		strcpy(cmd_line, (char *) (r6 + KERNELBASE));
-	}
-
-	/* Initialize machine-dependent vectors */
-
-	ppc_md.setup_arch = ppc4xx_setup_arch;
-	ppc_md.show_percpuinfo = ppc4xx_show_percpuinfo;
-	ppc_md.show_cpuinfo = ppc4xx_show_cpuinfo;
-	ppc_md.init_IRQ = ppc4xx_init_IRQ;
-
-	ppc_md.restart = ppc4xx_restart;
-	ppc_md.power_off = ppc4xx_power_off;
-	ppc_md.halt = ppc4xx_halt;
-
-	ppc_md.calibrate_decr = ppc4xx_calibrate_decr;
-
-	ppc_md.find_end_of_memory = ppc4xx_find_end_of_memory;
-	ppc_md.setup_io_mappings = ppc4xx_map_io;
-
-#ifdef CONFIG_SERIAL_TEXT_DEBUG
-	ppc_md.progress = gen550_progress;
-#endif
-}
-
-/* Called from machine_check_exception */
-void platform_machine_check(struct pt_regs *regs)
-{
-#if defined(DCRN_PLB0_BEAR)
-	printk("PLB0: BEAR= 0x%08x ACR=   0x%08x BESR=  0x%08x\n",
-	    mfdcr(DCRN_PLB0_BEAR), mfdcr(DCRN_PLB0_ACR),
-	    mfdcr(DCRN_PLB0_BESR));
-#endif
-#if defined(DCRN_POB0_BEAR)
-	printk("PLB0 to OPB: BEAR= 0x%08x BESR0= 0x%08x BESR1= 0x%08x\n",
-	    mfdcr(DCRN_POB0_BEAR), mfdcr(DCRN_POB0_BESR0),
-	    mfdcr(DCRN_POB0_BESR1));
-#endif
-
-}
diff --git a/arch/ppc/syslib/ppc4xx_sgdma.c b/arch/ppc/syslib/ppc4xx_sgdma.c
deleted file mode 100644
index c4b369b50f9c..000000000000
--- a/arch/ppc/syslib/ppc4xx_sgdma.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * IBM PPC4xx DMA engine scatter/gather library
- *
- * Copyright 2002-2003 MontaVista Software Inc.
- *
- * Cleaned up and converted to new DCR access
- * Matt Porter <mporter@kernel.crashing.org>
- *
- * Original code by Armin Kuster <akuster@mvista.com>
- * and Pete Popov <ppopov@mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/ppc4xx_dma.h>
-
-void
-ppc4xx_set_sg_addr(int dmanr, phys_addr_t sg_addr)
-{
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_set_sg_addr: bad channel: %d\n", dmanr);
-		return;
-	}
-
-#ifdef PPC4xx_DMA_64BIT
-	mtdcr(DCRN_ASGH0 + (dmanr * 0x8), (u32)(sg_addr >> 32));
-#endif
-	mtdcr(DCRN_ASG0 + (dmanr * 0x8), (u32)sg_addr);
-}
-
-/*
- *   Add a new sgl descriptor to the end of a scatter/gather list
- *   which was created by alloc_dma_handle().
- *
- *   For a memory to memory transfer, both dma addresses must be
- *   valid. For a peripheral to memory transfer, one of the addresses
- *   must be set to NULL, depending on the direction of the transfer:
- *   memory to peripheral: set dst_addr to NULL,
- *   peripheral to memory: set src_addr to NULL.
- */
-int
-ppc4xx_add_dma_sgl(sgl_handle_t handle, phys_addr_t src_addr, phys_addr_t dst_addr,
-		   unsigned int count)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-	ppc_dma_ch_t *p_dma_ch;
-
-	if (!handle) {
-		printk("ppc4xx_add_dma_sgl: null handle\n");
-		return DMA_STATUS_BAD_HANDLE;
-	}
-
-	if (psgl->dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_add_dma_sgl: bad channel: %d\n", psgl->dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	p_dma_ch = &dma_channels[psgl->dmanr];
-
-#ifdef DEBUG_4xxDMA
-	{
-		int error = 0;
-		unsigned int aligned =
-		    (unsigned) src_addr | (unsigned) dst_addr | count;
-		switch (p_dma_ch->pwidth) {
-		case PW_8:
-			break;
-		case PW_16:
-			if (aligned & 0x1)
-				error = 1;
-			break;
-		case PW_32:
-			if (aligned & 0x3)
-				error = 1;
-			break;
-		case PW_64:
-			if (aligned & 0x7)
-				error = 1;
-			break;
-		default:
-			printk("ppc4xx_add_dma_sgl: invalid bus width: 0x%x\n",
-			       p_dma_ch->pwidth);
-			return DMA_STATUS_GENERAL_ERROR;
-		}
-		if (error)
-			printk
-			    ("Alignment warning: ppc4xx_add_dma_sgl src 0x%x dst 0x%x count 0x%x bus width var %d\n",
-			     src_addr, dst_addr, count, p_dma_ch->pwidth);
-
-	}
-#endif
-
-	if ((unsigned) (psgl->ptail + 1) >= ((unsigned) psgl + SGL_LIST_SIZE)) {
-		printk("sgl handle out of memory \n");
-		return DMA_STATUS_OUT_OF_MEMORY;
-	}
-
-	if (!psgl->ptail) {
-		psgl->phead = (ppc_sgl_t *)
-		    ((unsigned) psgl + sizeof (sgl_list_info_t));
-		psgl->phead_dma = psgl->dma_addr + sizeof(sgl_list_info_t);
-		psgl->ptail = psgl->phead;
-		psgl->ptail_dma = psgl->phead_dma;
-	} else {
-		if(p_dma_ch->int_on_final_sg) {
-			/* mask out all dma interrupts, except error, on tail
-			before adding new tail. */
-			psgl->ptail->control_count &=
-				~(SG_TCI_ENABLE | SG_ETI_ENABLE);
-		}
-		psgl->ptail->next = psgl->ptail_dma + sizeof(ppc_sgl_t);
-		psgl->ptail++;
-		psgl->ptail_dma += sizeof(ppc_sgl_t);
-	}
-
-	psgl->ptail->control = psgl->control;
-	psgl->ptail->src_addr = src_addr;
-	psgl->ptail->dst_addr = dst_addr;
-	psgl->ptail->control_count = (count >> p_dma_ch->shift) |
-	    psgl->sgl_control;
-	psgl->ptail->next = (uint32_t) NULL;
-
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Enable (start) the DMA described by the sgl handle.
- */
-void
-ppc4xx_enable_dma_sgl(sgl_handle_t handle)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-	ppc_dma_ch_t *p_dma_ch;
-	uint32_t sg_command;
-
-	if (!handle) {
-		printk("ppc4xx_enable_dma_sgl: null handle\n");
-		return;
-	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
-		printk("ppc4xx_enable_dma_sgl: bad channel in handle %d\n",
-		       psgl->dmanr);
-		return;
-	} else if (!psgl->phead) {
-		printk("ppc4xx_enable_dma_sgl: sg list empty\n");
-		return;
-	}
-
-	p_dma_ch = &dma_channels[psgl->dmanr];
-	psgl->ptail->control_count &= ~SG_LINK;	/* make this the last dscrptr */
-	sg_command = mfdcr(DCRN_ASGC);
-
-	ppc4xx_set_sg_addr(psgl->dmanr, psgl->phead_dma);
-
-	sg_command |= SSG_ENABLE(psgl->dmanr);
-
-	mtdcr(DCRN_ASGC, sg_command);	/* start transfer */
-}
-
-/*
- * Halt an active scatter/gather DMA operation.
- */
-void
-ppc4xx_disable_dma_sgl(sgl_handle_t handle)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-	uint32_t sg_command;
-
-	if (!handle) {
-		printk("ppc4xx_enable_dma_sgl: null handle\n");
-		return;
-	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
-		printk("ppc4xx_enable_dma_sgl: bad channel in handle %d\n",
-		       psgl->dmanr);
-		return;
-	}
-
-	sg_command = mfdcr(DCRN_ASGC);
-	sg_command &= ~SSG_ENABLE(psgl->dmanr);
-	mtdcr(DCRN_ASGC, sg_command);	/* stop transfer */
-}
-
-/*
- *  Returns number of bytes left to be transferred from the entire sgl list.
- *  *src_addr and *dst_addr get set to the source/destination address of
- *  the sgl descriptor where the DMA stopped.
- *
- *  An sgl transfer must NOT be active when this function is called.
- */
-int
-ppc4xx_get_dma_sgl_residue(sgl_handle_t handle, phys_addr_t * src_addr,
-			   phys_addr_t * dst_addr)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-	ppc_dma_ch_t *p_dma_ch;
-	ppc_sgl_t *pnext, *sgl_addr;
-	uint32_t count_left;
-
-	if (!handle) {
-		printk("ppc4xx_get_dma_sgl_residue: null handle\n");
-		return DMA_STATUS_BAD_HANDLE;
-	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
-		printk("ppc4xx_get_dma_sgl_residue: bad channel in handle %d\n",
-		       psgl->dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	sgl_addr = (ppc_sgl_t *) __va(mfdcr(DCRN_ASG0 + (psgl->dmanr * 0x8)));
-	count_left = mfdcr(DCRN_DMACT0 + (psgl->dmanr * 0x8)) & SG_COUNT_MASK;
-
-	if (!sgl_addr) {
-		printk("ppc4xx_get_dma_sgl_residue: sgl addr register is null\n");
-		goto error;
-	}
-
-	pnext = psgl->phead;
-	while (pnext &&
-	       ((unsigned) pnext < ((unsigned) psgl + SGL_LIST_SIZE) &&
-		(pnext != sgl_addr))
-	    ) {
-		pnext++;
-	}
-
-	if (pnext == sgl_addr) {	/* found the sgl descriptor */
-
-		*src_addr = pnext->src_addr;
-		*dst_addr = pnext->dst_addr;
-
-		/*
-		 * Now search the remaining descriptors and add their count.
-		 * We already have the remaining count from this descriptor in
-		 * count_left.
-		 */
-		pnext++;
-
-		while ((pnext != psgl->ptail) &&
-		       ((unsigned) pnext < ((unsigned) psgl + SGL_LIST_SIZE))
-		    ) {
-			count_left += pnext->control_count & SG_COUNT_MASK;
-		}
-
-		if (pnext != psgl->ptail) {	/* should never happen */
-			printk
-			    ("ppc4xx_get_dma_sgl_residue error (1) psgl->ptail 0x%x handle 0x%x\n",
-			     (unsigned int) psgl->ptail, (unsigned int) handle);
-			goto error;
-		}
-
-		/* success */
-		p_dma_ch = &dma_channels[psgl->dmanr];
-		return (count_left << p_dma_ch->shift);	/* count in bytes */
-
-	} else {
-		/* this shouldn't happen */
-		printk
-		    ("get_dma_sgl_residue, unable to match current address 0x%x, handle 0x%x\n",
-		     (unsigned int) sgl_addr, (unsigned int) handle);
-
-	}
-
-      error:
-	*src_addr = (phys_addr_t) NULL;
-	*dst_addr = (phys_addr_t) NULL;
-	return 0;
-}
-
-/*
- * Returns the address(es) of the buffer(s) contained in the head element of
- * the scatter/gather list.  The element is removed from the scatter/gather
- * list and the next element becomes the head.
- *
- * This function should only be called when the DMA is not active.
- */
-int
-ppc4xx_delete_dma_sgl_element(sgl_handle_t handle, phys_addr_t * src_dma_addr,
-			      phys_addr_t * dst_dma_addr)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-
-	if (!handle) {
-		printk("ppc4xx_delete_sgl_element: null handle\n");
-		return DMA_STATUS_BAD_HANDLE;
-	} else if (psgl->dmanr > (MAX_PPC4xx_DMA_CHANNELS - 1)) {
-		printk("ppc4xx_delete_sgl_element: bad channel in handle %d\n",
-		       psgl->dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	if (!psgl->phead) {
-		printk("ppc4xx_delete_sgl_element: sgl list empty\n");
-		*src_dma_addr = (phys_addr_t) NULL;
-		*dst_dma_addr = (phys_addr_t) NULL;
-		return DMA_STATUS_SGL_LIST_EMPTY;
-	}
-
-	*src_dma_addr = (phys_addr_t) psgl->phead->src_addr;
-	*dst_dma_addr = (phys_addr_t) psgl->phead->dst_addr;
-
-	if (psgl->phead == psgl->ptail) {
-		/* last descriptor on the list */
-		psgl->phead = NULL;
-		psgl->ptail = NULL;
-	} else {
-		psgl->phead++;
-		psgl->phead_dma += sizeof(ppc_sgl_t);
-	}
-
-	return DMA_STATUS_GOOD;
-}
-
-
-/*
- *   Create a scatter/gather list handle.  This is simply a structure which
- *   describes a scatter/gather list.
- *
- *   A handle is returned in "handle" which the driver should save in order to
- *   be able to access this list later.  A chunk of memory will be allocated
- *   to be used by the API for internal management purposes, including managing
- *   the sg list and allocating memory for the sgl descriptors.  One page should
- *   be more than enough for that purpose.  Perhaps it's a bit wasteful to use
- *   a whole page for a single sg list, but most likely there will be only one
- *   sg list per channel.
- *
- *   Interrupt notes:
- *   Each sgl descriptor has a copy of the DMA control word which the DMA engine
- *   loads in the control register.  The control word has a "global" interrupt
- *   enable bit for that channel. Interrupts are further qualified by a few bits
- *   in the sgl descriptor count register.  In order to setup an sgl, we have to
- *   know ahead of time whether or not interrupts will be enabled at the completion
- *   of the transfers.  Thus, enable_dma_interrupt()/disable_dma_interrupt() MUST
- *   be called before calling alloc_dma_handle().  If the interrupt mode will never
- *   change after powerup, then enable_dma_interrupt()/disable_dma_interrupt()
- *   do not have to be called -- interrupts will be enabled or disabled based
- *   on how the channel was configured after powerup by the hw_init_dma_channel()
- *   function.  Each sgl descriptor will be setup to interrupt if an error occurs;
- *   however, only the last descriptor will be setup to interrupt. Thus, an
- *   interrupt will occur (if interrupts are enabled) only after the complete
- *   sgl transfer is done.
- */
-int
-ppc4xx_alloc_dma_handle(sgl_handle_t * phandle, unsigned int mode, unsigned int dmanr)
-{
-	sgl_list_info_t *psgl=NULL;
-	dma_addr_t dma_addr;
-	ppc_dma_ch_t *p_dma_ch = &dma_channels[dmanr];
-	uint32_t sg_command;
-	uint32_t ctc_settings;
-	void *ret;
-
-	if (dmanr >= MAX_PPC4xx_DMA_CHANNELS) {
-		printk("ppc4xx_alloc_dma_handle: invalid channel 0x%x\n", dmanr);
-		return DMA_STATUS_BAD_CHANNEL;
-	}
-
-	if (!phandle) {
-		printk("ppc4xx_alloc_dma_handle: null handle pointer\n");
-		return DMA_STATUS_NULL_POINTER;
-	}
-
-	/* Get a page of memory, which is zeroed out by consistent_alloc() */
-	ret = dma_alloc_coherent(NULL, DMA_PPC4xx_SIZE, &dma_addr, GFP_KERNEL);
-	if (ret != NULL) {
-		memset(ret, 0, DMA_PPC4xx_SIZE);
-		psgl = (sgl_list_info_t *) ret;
-	}
-
-	if (psgl == NULL) {
-		*phandle = (sgl_handle_t) NULL;
-		return DMA_STATUS_OUT_OF_MEMORY;
-	}
-
-	psgl->dma_addr = dma_addr;
-	psgl->dmanr = dmanr;
-
-	/*
-	 * Modify and save the control word. These words will be
-	 * written to each sgl descriptor.  The DMA engine then
-	 * loads this control word into the control register
-	 * every time it reads a new descriptor.
-	 */
-	psgl->control = p_dma_ch->control;
-	/* Clear all mode bits */
-	psgl->control &= ~(DMA_TM_MASK | DMA_TD);
-	/* Save control word and mode */
-	psgl->control |= (mode | DMA_CE_ENABLE);
-
-	/* In MM mode, we must set ETD/TCE */
-	if (mode == DMA_MODE_MM)
-		psgl->control |= DMA_ETD_OUTPUT | DMA_TCE_ENABLE;
-
-	if (p_dma_ch->int_enable) {
-		/* Enable channel interrupt */
-		psgl->control |= DMA_CIE_ENABLE;
-	} else {
-		psgl->control &= ~DMA_CIE_ENABLE;
-	}
-
-	sg_command = mfdcr(DCRN_ASGC);
-	sg_command |= SSG_MASK_ENABLE(dmanr);
-
-	/* Enable SGL control access */
-	mtdcr(DCRN_ASGC, sg_command);
-	psgl->sgl_control = SG_ERI_ENABLE | SG_LINK;
-
-	/* keep control count register settings */
-	ctc_settings = mfdcr(DCRN_DMACT0 + (dmanr * 0x8))
-		& (DMA_CTC_BSIZ_MSK | DMA_CTC_BTEN); /*burst mode settings*/
-	psgl->sgl_control |= ctc_settings;
-
-	if (p_dma_ch->int_enable) {
-		if (p_dma_ch->tce_enable)
-			psgl->sgl_control |= SG_TCI_ENABLE;
-		else
-			psgl->sgl_control |= SG_ETI_ENABLE;
-	}
-
-	*phandle = (sgl_handle_t) psgl;
-	return DMA_STATUS_GOOD;
-}
-
-/*
- * Destroy a scatter/gather list handle that was created by alloc_dma_handle().
- * The list must be empty (contain no elements).
- */
-void
-ppc4xx_free_dma_handle(sgl_handle_t handle)
-{
-	sgl_list_info_t *psgl = (sgl_list_info_t *) handle;
-
-	if (!handle) {
-		printk("ppc4xx_free_dma_handle: got NULL\n");
-		return;
-	} else if (psgl->phead) {
-		printk("ppc4xx_free_dma_handle: list not empty\n");
-		return;
-	} else if (!psgl->dma_addr) {	/* should never happen */
-		printk("ppc4xx_free_dma_handle: no dma address\n");
-		return;
-	}
-
-	dma_free_coherent(NULL, DMA_PPC4xx_SIZE, (void *) psgl, 0);
-}
-
-EXPORT_SYMBOL(ppc4xx_alloc_dma_handle);
-EXPORT_SYMBOL(ppc4xx_free_dma_handle);
-EXPORT_SYMBOL(ppc4xx_add_dma_sgl);
-EXPORT_SYMBOL(ppc4xx_delete_dma_sgl_element);
-EXPORT_SYMBOL(ppc4xx_enable_dma_sgl);
-EXPORT_SYMBOL(ppc4xx_disable_dma_sgl);
-EXPORT_SYMBOL(ppc4xx_get_dma_sgl_residue);
diff --git a/arch/ppc/syslib/ppc8xx_pic.c b/arch/ppc/syslib/ppc8xx_pic.c
deleted file mode 100644
index bce9a75c80e3..000000000000
--- a/arch/ppc/syslib/ppc8xx_pic.c
+++ /dev/null
@@ -1,126 +0,0 @@
-#include <linux/module.h>
-#include <linux/stddef.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/signal.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/8xx_immap.h>
-#include <asm/mpc8xx.h>
-#include "ppc8xx_pic.h"
-
-extern int cpm_get_irq(void);
-
-/* The 8xx internal interrupt controller.  It is usually
- * the only interrupt controller.  Some boards, like the MBX and
- * Sandpoint have the 8259 as a secondary controller.  Depending
- * upon the processor type, the internal controller can have as
- * few as 16 interrupts or as many as 64.  We could use  the
- * "clear_bit()" and "set_bit()" functions like other platforms,
- * but they are overkill for us.
- */
-
-static void m8xx_mask_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
-	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
-}
-
-static void m8xx_unmask_irq(unsigned int irq_nr)
-{
-	int	bit, word;
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] |= (1 << (31-bit));
-	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
-}
-
-static void m8xx_end_irq(unsigned int irq_nr)
-{
-	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))
-			&& irq_desc[irq_nr].action) {
-		int bit, word;
-
-		bit = irq_nr & 0x1f;
-		word = irq_nr >> 5;
-
-		ppc_cached_irq_mask[word] |= (1 << (31-bit));
-		out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
-	}
-}
-
-
-static void m8xx_mask_and_ack(unsigned int irq_nr)
-{
-	int	bit, word;
-
-	bit = irq_nr & 0x1f;
-	word = irq_nr >> 5;
-
-	ppc_cached_irq_mask[word] &= ~(1 << (31-bit));
-	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_simask, ppc_cached_irq_mask[word]);
-	out_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sipend, 1 << (31-bit));
-}
-
-struct hw_interrupt_type ppc8xx_pic = {
-	.typename = " 8xx SIU  ",
-	.enable = m8xx_unmask_irq,
-	.disable = m8xx_mask_irq,
-	.ack = m8xx_mask_and_ack,
-	.end = m8xx_end_irq,
-};
-
-/*
- * We either return a valid interrupt or -1 if there is nothing pending
- */
-int
-m8xx_get_irq(struct pt_regs *regs)
-{
-	int irq;
-
-	/* For MPC8xx, read the SIVEC register and shift the bits down
-	 * to get the irq number.
-	 */
-	irq = in_be32(&((immap_t *)IMAP_ADDR)->im_siu_conf.sc_sivec) >> 26;
-
-	/*
-	 * When we read the sivec without an interrupt to process, we will
-	 * get back SIU_LEVEL7.  In this case, return -1
-	 */
-        if (irq == CPM_INTERRUPT)
-        	irq = CPM_IRQ_OFFSET + cpm_get_irq();
-#if defined(CONFIG_PCI)
-	else if (irq == ISA_BRIDGE_INT) {
-		int isa_irq;
-
-		if ((isa_irq = i8259_poll(regs)) >= 0)
-			irq = I8259_IRQ_OFFSET + isa_irq;
-	}
-#endif	/* CONFIG_PCI */
-	else if (irq == SIU_LEVEL7)
-		irq = -1;
-
-	return irq;
-}
-
-#if defined(CONFIG_MBX) && defined(CONFIG_PCI)
-/* Only the MBX uses the external 8259.  This allows us to catch standard
- * drivers that may mess up the internal interrupt controllers, and also
- * allow them to run without modification on the MBX.
- */
-void mbx_i8259_action(int irq, void *dev_id, struct pt_regs *regs)
-{
-	/* This interrupt handler never actually gets called.  It is
-	 * installed only to unmask the 8259 cascade interrupt in the SIU
-	 * and to make the 8259 cascade interrupt visible in /proc/interrupts.
-	 */
-}
-#endif	/* CONFIG_PCI */
diff --git a/arch/ppc/syslib/ppc8xx_pic.h b/arch/ppc/syslib/ppc8xx_pic.h
deleted file mode 100644
index 53bcd97ef7f5..000000000000
--- a/arch/ppc/syslib/ppc8xx_pic.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _PPC_KERNEL_PPC8xx_H
-#define _PPC_KERNEL_PPC8xx_H
-
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-
-extern struct hw_interrupt_type ppc8xx_pic;
-
-void m8xx_do_IRQ(struct pt_regs *regs,
-                 int            cpu);
-int m8xx_get_irq(struct pt_regs *regs);
-
-#ifdef CONFIG_MBX
-#include <asm/i8259.h>
-#include <asm/io.h>
-void mbx_i8259_action(int cpl, void *dev_id, struct pt_regs *regs);
-#endif
-
-#endif /* _PPC_KERNEL_PPC8xx_H */
diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c
deleted file mode 100644
index 837183c24dfc..000000000000
--- a/arch/ppc/syslib/ppc_sys.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * PPC System library functions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * Copyright 2005 Freescale Semiconductor Inc.
- * Copyright 2005 MontaVista, Inc. by Vitaly Bordug <vbordug@ru.mvista.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <asm/ppc_sys.h>
-
-int (*ppc_sys_device_fixup) (struct platform_device * pdev);
-
-static int ppc_sys_inited;
-static int ppc_sys_func_inited;
-
-static const char *ppc_sys_func_names[] = {
-	[PPC_SYS_FUNC_DUMMY] = "dummy",
-	[PPC_SYS_FUNC_ETH] = "eth",
-	[PPC_SYS_FUNC_UART] = "uart",
-	[PPC_SYS_FUNC_HLDC] = "hldc",
-	[PPC_SYS_FUNC_USB] = "usb",
-	[PPC_SYS_FUNC_IRDA] = "irda",
-};
-
-void __init identify_ppc_sys_by_id(u32 id)
-{
-	unsigned int i = 0;
-	while (1) {
-		if ((ppc_sys_specs[i].mask & id) == ppc_sys_specs[i].value)
-			break;
-		i++;
-	}
-
-	cur_ppc_sys_spec = &ppc_sys_specs[i];
-
-	return;
-}
-
-void __init identify_ppc_sys_by_name(char *name)
-{
-	unsigned int i = 0;
-	while (ppc_sys_specs[i].ppc_sys_name[0]) {
-		if (!strcmp(ppc_sys_specs[i].ppc_sys_name, name))
-			break;
-		i++;
-	}
-	cur_ppc_sys_spec = &ppc_sys_specs[i];
-
-	return;
-}
-
-static int __init count_sys_specs(void)
-{
-	int i = 0;
-	while (ppc_sys_specs[i].ppc_sys_name[0])
-		i++;
-	return i;
-}
-
-static int __init find_chip_by_name_and_id(char *name, u32 id)
-{
-	int ret = -1;
-	unsigned int i = 0;
-	unsigned int j = 0;
-	unsigned int dups = 0;
-
-	unsigned char matched[count_sys_specs()];
-
-	while (ppc_sys_specs[i].ppc_sys_name[0]) {
-		if (!strcmp(ppc_sys_specs[i].ppc_sys_name, name))
-			matched[j++] = i;
-		i++;
-	}
-
-	ret = i;
-
-	if (j != 0) {
-		for (i = 0; i < j; i++) {
-			if ((ppc_sys_specs[matched[i]].mask & id) ==
-			    ppc_sys_specs[matched[i]].value) {
-				ret = matched[i];
-				dups++;
-			}
-		}
-		ret = (dups == 1) ? ret : (-1 * dups);
-	}
-	return ret;
-}
-
-void __init identify_ppc_sys_by_name_and_id(char *name, u32 id)
-{
-	int i = find_chip_by_name_and_id(name, id);
-	BUG_ON(i < 0);
-	cur_ppc_sys_spec = &ppc_sys_specs[i];
-}
-
-/* Update all memory resources by paddr, call before platform_device_register */
-void __init
-ppc_sys_fixup_mem_resource(struct platform_device *pdev, phys_addr_t paddr)
-{
-	int i;
-	for (i = 0; i < pdev->num_resources; i++) {
-		struct resource *r = &pdev->resource[i];
-		if (((r->flags & IORESOURCE_MEM) == IORESOURCE_MEM) && 
-			((r->flags & PPC_SYS_IORESOURCE_FIXUPPED) != PPC_SYS_IORESOURCE_FIXUPPED)) {
-			r->start += paddr;
-			r->end += paddr;
-			r->flags |= PPC_SYS_IORESOURCE_FIXUPPED;
-		}
-	}
-}
-
-/* Get platform_data pointer out of platform device, call before platform_device_register */
-void *__init ppc_sys_get_pdata(enum ppc_sys_devices dev)
-{
-	return ppc_sys_platform_devices[dev].dev.platform_data;
-}
-
-void ppc_sys_device_remove(enum ppc_sys_devices dev)
-{
-	unsigned int i;
-
-	if (ppc_sys_inited) {
-		platform_device_unregister(&ppc_sys_platform_devices[dev]);
-	} else {
-		if (cur_ppc_sys_spec == NULL)
-			return;
-		for (i = 0; i < cur_ppc_sys_spec->num_devices; i++)
-			if (cur_ppc_sys_spec->device_list[i] == dev)
-				cur_ppc_sys_spec->device_list[i] = -1;
-	}
-}
-
-/* Platform-notify mapping
- * Helper function for BSP code to assign board-specific platfom-divice bits
- */
-
-void platform_notify_map(const struct platform_notify_dev_map *map,
-			 struct device *dev)
-{
-	struct platform_device *pdev;
-	int len, idx;
-	const char *s;
-
-	/* do nothing if no device or no bus_id */
-	if (!dev || !dev->bus_id)
-		return;
-
-	/* call per device map */
-	while (map->bus_id != NULL) {
-		idx = -1;
-		s = strrchr(dev->bus_id, '.');
-		if (s != NULL) {
-			idx = (int)simple_strtol(s + 1, NULL, 10);
-			len = s - dev->bus_id;
-		} else {
-			s = dev->bus_id;
-			len = strlen(dev->bus_id);
-		}
-
-		if (!strncmp(dev->bus_id, map->bus_id, len)) {
-			pdev = container_of(dev, struct platform_device, dev);
-			map->rtn(pdev, idx);
-		}
-		map++;
-	}
-}
-
-/*
-   Function assignment stuff.
- Intended to work as follows:
- the device name defined in foo_devices.c will be concatenated with :"func",
- where func is string map of respective function from platfom_device_func enum
-
- The PPC_SYS_FUNC_DUMMY function is intended to remove all assignments, making the device to appear
- in platform bus with unmodified name.
- */
-
-/*
-   Here we'll replace .name pointers with fixed-length strings
-   Hereby, this should be called *before* any func stuff triggeded.
- */
-void ppc_sys_device_initfunc(void)
-{
-	int i;
-	const char *name;
-	static char new_names[NUM_PPC_SYS_DEVS][BUS_ID_SIZE];
-	enum ppc_sys_devices cur_dev;
-
-	/* If inited yet, do nothing */
-	if (ppc_sys_func_inited)
-		return;
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		if ((cur_dev = cur_ppc_sys_spec->device_list[i]) < 0)
-			continue;
-
-		if (ppc_sys_platform_devices[cur_dev].name) {
-			/*backup name */
-			name = ppc_sys_platform_devices[cur_dev].name;
-			strlcpy(new_names[i], name, BUS_ID_SIZE);
-			ppc_sys_platform_devices[cur_dev].name = new_names[i];
-		}
-	}
-
-	ppc_sys_func_inited = 1;
-}
-
-/*The "engine" of the func stuff. Here we either concat specified function string description
- to the name, or remove it if PPC_SYS_FUNC_DUMMY parameter is passed here*/
-void ppc_sys_device_setfunc(enum ppc_sys_devices dev,
-			    enum platform_device_func func)
-{
-	char *s;
-	char *name = (char *)ppc_sys_platform_devices[dev].name;
-	char tmp[BUS_ID_SIZE];
-
-	if (!ppc_sys_func_inited) {
-		printk(KERN_ERR "Unable to alter function - not inited!\n");
-		return;
-	}
-
-	if (ppc_sys_inited) {
-		platform_device_unregister(&ppc_sys_platform_devices[dev]);
-	}
-
-	if ((s = (char *)strchr(name, ':')) != NULL) {	/* reassign */
-		/* Either change the name after ':' or remove func modifications */
-		if (func != PPC_SYS_FUNC_DUMMY)
-			strlcpy(s + 1, ppc_sys_func_names[func], BUS_ID_SIZE);
-		else
-			*s = 0;
-	} else if (func != PPC_SYS_FUNC_DUMMY) {
-		/* do assignment if it is not just "clear"  request */
-		sprintf(tmp, "%s:%s", name, ppc_sys_func_names[func]);
-		strlcpy(name, tmp, BUS_ID_SIZE);
-	}
-
-	if (ppc_sys_inited) {
-		platform_device_register(&ppc_sys_platform_devices[dev]);
-	}
-}
-
-void ppc_sys_device_disable(enum ppc_sys_devices dev)
-{
-	BUG_ON(cur_ppc_sys_spec == NULL);
-
-	/*Check if it is enabled*/
-	if(!(cur_ppc_sys_spec->config[dev] & PPC_SYS_CONFIG_DISABLED)) {
-		if (ppc_sys_inited) {
-			platform_device_unregister(&ppc_sys_platform_devices[dev]);
-		}
-		cur_ppc_sys_spec->config[dev] |= PPC_SYS_CONFIG_DISABLED;
-	}
-}
-
-void ppc_sys_device_enable(enum ppc_sys_devices dev)
-{
-	BUG_ON(cur_ppc_sys_spec == NULL);
-
-	/*Check if it is disabled*/
-	if(cur_ppc_sys_spec->config[dev] & PPC_SYS_CONFIG_DISABLED) {
-		if (ppc_sys_inited) {
-			platform_device_register(&ppc_sys_platform_devices[dev]);
-		}
-		cur_ppc_sys_spec->config[dev] &= ~PPC_SYS_CONFIG_DISABLED;
-	}
-
-}
-
-void ppc_sys_device_enable_all(void)
-{
-	enum ppc_sys_devices cur_dev;
-	int i;
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		cur_dev = cur_ppc_sys_spec->device_list[i];
-		ppc_sys_device_enable(cur_dev);
-	}
-}
-
-void ppc_sys_device_disable_all(void)
-{
-	enum ppc_sys_devices cur_dev;
-	int i;
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		cur_dev = cur_ppc_sys_spec->device_list[i];
-		ppc_sys_device_disable(cur_dev);
-	}
-}
-
-
-static int __init ppc_sys_init(void)
-{
-	unsigned int i, dev_id, ret = 0;
-
-	BUG_ON(cur_ppc_sys_spec == NULL);
-
-	for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
-		dev_id = cur_ppc_sys_spec->device_list[i];
-		if ((dev_id != -1) &&
-		!(cur_ppc_sys_spec->config[dev_id] & PPC_SYS_CONFIG_DISABLED)) {
-			if (ppc_sys_device_fixup != NULL)
-				ppc_sys_device_fixup(&ppc_sys_platform_devices
-						     [dev_id]);
-			if (platform_device_register
-			    (&ppc_sys_platform_devices[dev_id])) {
-				ret = 1;
-				printk(KERN_ERR
-				       "unable to register device %d\n",
-				       dev_id);
-			}
-		}
-	}
-
-	ppc_sys_inited = 1;
-	return ret;
-}
-
-subsys_initcall(ppc_sys_init);
diff --git a/arch/ppc/syslib/pq2_devices.c b/arch/ppc/syslib/pq2_devices.c
deleted file mode 100644
index fefbc217a56d..000000000000
--- a/arch/ppc/syslib/pq2_devices.c
+++ /dev/null
@@ -1,393 +0,0 @@
-/*
- * PQ2 Device descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <asm/cpm2.h>
-#include <asm/irq.h>
-#include <asm/ppc_sys.h>
-#include <asm/machdep.h>
-
-struct platform_device ppc_sys_platform_devices[] = {
-	[MPC82xx_CPM_FCC1] = {
-		.name = "fsl-cpm-fcc",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "fcc_regs",
-				.start	= 0x11300,
-				.end	= 0x1131f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "fcc_pram",
-				.start	= 0x8400,
-				.end	= 0x84ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_FCC1,
-				.end	= SIU_INT_FCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_FCC2] = {
-		.name = "fsl-cpm-fcc",
-		.id	= 2,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "fcc_regs",
-				.start	= 0x11320,
-				.end	= 0x1133f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "fcc_pram",
-				.start	= 0x8500,
-				.end	= 0x85ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_FCC2,
-				.end	= SIU_INT_FCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_FCC3] = {
-		.name = "fsl-cpm-fcc",
-		.id	= 3,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "fcc_regs",
-				.start	= 0x11340,
-				.end	= 0x1135f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "fcc_pram",
-				.start	= 0x8600,
-				.end	= 0x86ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_FCC3,
-				.end	= SIU_INT_FCC3,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_I2C] = {
-		.name = "fsl-cpm-i2c",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "i2c_mem",
-				.start	= 0x11860,
-				.end	= 0x118BF,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "i2c_pram",
-				.start 	= 0x8afc,
-				.end	= 0x8afd,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_I2C,
-				.end	= SIU_INT_I2C,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SCC1] = {
-		.name = "fsl-cpm-scc",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0x11A00,
-				.end	= 0x11A1F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x8000,
-				.end	= 0x80ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC1,
-				.end	= SIU_INT_SCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SCC2] = {
-		.name = "fsl-cpm-scc",
-		.id	= 2,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0x11A20,
-				.end	= 0x11A3F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x8100,
-				.end	= 0x81ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC2,
-				.end	= SIU_INT_SCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SCC3] = {
-		.name = "fsl-cpm-scc",
-		.id	= 3,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name 	= "regs",
-				.start	= 0x11A40,
-				.end	= 0x11A5F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x8200,
-				.end	= 0x82ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC3,
-				.end	= SIU_INT_SCC3,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SCC4] = {
-		.name = "fsl-cpm-scc",
-		.id	= 4,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "regs",
-				.start	= 0x11A60,
-				.end	= 0x11A7F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "pram",
-				.start	= 0x8300,
-				.end	= 0x83ff,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SCC4,
-				.end	= SIU_INT_SCC4,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SPI] = {
-		.name = "fsl-cpm-spi",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "spi_mem",
-				.start	= 0x11AA0,
-				.end	= 0x11AFF,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "spi_pram",
-				.start	= 0x89fc,
-				.end	= 0x89fd,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SPI,
-				.end	= SIU_INT_SPI,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_MCC1] = {
-		.name = "fsl-cpm-mcc",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "mcc_mem",
-				.start	= 0x11B30,
-				.end	= 0x11B3F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "mcc_pram",
-				.start	= 0x8700,
-				.end	= 0x877f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_MCC1,
-				.end	= SIU_INT_MCC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_MCC2] = {
-		.name = "fsl-cpm-mcc",
-		.id	= 2,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "mcc_mem",
-				.start	= 0x11B50,
-				.end	= 0x11B5F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "mcc_pram",
-				.start	= 0x8800,
-				.end	= 0x887f,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_MCC2,
-				.end	= SIU_INT_MCC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SMC1] = {
-		.name = "fsl-cpm-smc",
-		.id	= 1,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "smc_mem",
-				.start	= 0x11A80,
-				.end	= 0x11A8F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "smc_pram",
-				.start	= 0x87fc,
-				.end	= 0x87fd,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SMC1,
-				.end	= SIU_INT_SMC1,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_SMC2] = {
-		.name = "fsl-cpm-smc",
-		.id	= 2,
-		.num_resources	 = 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "smc_mem",
-				.start	= 0x11A90,
-				.end	= 0x11A9F,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "smc_pram",
-				.start	= 0x88fc,
-				.end	= 0x88fd,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_SMC2,
-				.end	= SIU_INT_SMC2,
-				.flags	= IORESOURCE_IRQ,
-			},
-		},
-	},
-	[MPC82xx_CPM_USB] = {
-		.name = "fsl-cpm-usb",
-		.id	= 1,
-		.num_resources	= 3,
-		.resource = (struct resource[]) {
-			{
-				.name	= "usb_mem",
-				.start	= 0x11b60,
-				.end	= 0x11b78,
-				.flags	= IORESOURCE_MEM,
-			},
-			{
-				.name	= "usb_pram",
-				.start	= 0x8b00,
-				.end	= 0x8bff,
-				.flags 	= IORESOURCE_MEM,
-			},
-			{
-				.start	= SIU_INT_USB,
-				.end	= SIU_INT_USB,
-				.flags	= IORESOURCE_IRQ,
-			},
-
-		},
-	},
-	[MPC82xx_SEC1] = {
-		.name = "fsl-sec",
-		.id = 1,
-		.num_resources = 1,
-		.resource = (struct resource[]) {
-			{
-				.name	= "sec_mem",
-				.start	= 0x40000,
-				.end	= 0x52fff,
-				.flags	= IORESOURCE_MEM,
-			},
-		},
-	},
-	[MPC82xx_MDIO_BB] = {
-		.name = "fsl-bb-mdio",
-		.id = 0,
-		.num_resources = 0,
-	},
-};
-
-static int __init mach_mpc82xx_fixup(struct platform_device *pdev)
-{
-	ppc_sys_fixup_mem_resource(pdev, CPM_MAP_ADDR);
-	return 0;
-}
-
-static int __init mach_mpc82xx_init(void)
-{
-	if (ppc_md.progress)
-		ppc_md.progress("mach_mpc82xx_init:enter", 0);
-	ppc_sys_device_fixup = mach_mpc82xx_fixup;
-	return 0;
-}
-
-postcore_initcall(mach_mpc82xx_init);
diff --git a/arch/ppc/syslib/pq2_sys.c b/arch/ppc/syslib/pq2_sys.c
deleted file mode 100644
index 9c85300846c7..000000000000
--- a/arch/ppc/syslib/pq2_sys.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * PQ2 System descriptions
- *
- * Maintainer: Kumar Gala <galak@kernel.crashing.org>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-
-#include <asm/ppc_sys.h>
-
-struct ppc_sys_spec *cur_ppc_sys_spec;
-struct ppc_sys_spec ppc_sys_specs[] = {
-	/* below is a list of the 8260 family of processors */
-	{
-		.ppc_sys_name	= "8250",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 12,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8255",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 11,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
-			MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2,
-			MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8260",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8264",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8265",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		}
-	},
-	{
-		.ppc_sys_name	= "8266",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000000,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		}
-	},
-	/* below is a list of the 8272 family of processors */
-	{
-		.ppc_sys_name	= "8247",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000d00,
-		.num_devices	= 10,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-			MPC82xx_CPM_USB,
-		},
-	},
-	{
-		.ppc_sys_name	= "8248",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000c00,
-		.num_devices	= 12,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1,
-		},
-	},
-	{
-		.ppc_sys_name	= "8271",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000d00,
-		.num_devices	= 10,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-			MPC82xx_CPM_USB,
-		},
-	},
-	{
-		.ppc_sys_name	= "8272",
-		.mask		= 0x0000ff00,
-		.value		= 0x00000c00,
-		.num_devices	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
-			MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1,
-			MPC82xx_MDIO_BB,
-		},
-	},
-	/* below is a list of the 8280 family of processors */
-	{
-		.ppc_sys_name	= "8270",
-		.mask 		= 0x0000ff00,
-		.value 		= 0x00000a00,
-		.num_devices 	= 12,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-		},
-	},
-	{
-		.ppc_sys_name	= "8275",
-		.mask 		= 0x0000ff00,
-		.value 		= 0x00000a00,
-		.num_devices 	= 12,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC2, MPC82xx_CPM_SMC1,
-			MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI, MPC82xx_CPM_I2C,
-		},
-	},
-	{
-		.ppc_sys_name	= "8280",
-		.mask 		= 0x0000ff00,
-		.value 		= 0x00000a00,
-		.num_devices 	= 13,
-		.device_list = (enum ppc_sys_devices[])
-		{
-			MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_FCC3,
-			MPC82xx_CPM_SCC1, MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3,
-			MPC82xx_CPM_SCC4, MPC82xx_CPM_MCC1, MPC82xx_CPM_MCC2,
-			MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
-			MPC82xx_CPM_I2C,
-		},
-	},
-	{
-		/* default match */
-		.ppc_sys_name	= "",
-		.mask 		= 0x00000000,
-		.value 		= 0x00000000,
-	},
-};
diff --git a/arch/ppc/syslib/prep_nvram.c b/arch/ppc/syslib/prep_nvram.c
deleted file mode 100644
index 474dccbc4a8a..000000000000
--- a/arch/ppc/syslib/prep_nvram.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) 1998  Corey Minyard
- *
- * This reads the NvRAM on PReP compliant machines (generally from IBM or
- * Motorola).  Motorola kept the format of NvRAM in their ROM, PPCBUG, the
- * same, long after they had stopped producing PReP compliant machines.  So
- * this code is useful in those cases as well.
- *
- */
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-
-#include <asm/sections.h>
-#include <asm/io.h>
-#include <asm/machdep.h>
-#include <asm/prep_nvram.h>
-
-static char nvramData[MAX_PREP_NVRAM];
-static NVRAM_MAP *nvram=(NVRAM_MAP *)&nvramData[0];
-
-unsigned char prep_nvram_read_val(int addr)
-{
-	outb(addr, PREP_NVRAM_AS0);
-	outb(addr>>8, PREP_NVRAM_AS1);
-	return inb(PREP_NVRAM_DATA);
-}
-
-void prep_nvram_write_val(int           addr,
-			  unsigned char val)
-{
-	outb(addr, PREP_NVRAM_AS0);
-	outb(addr>>8, PREP_NVRAM_AS1);
-   	outb(val, PREP_NVRAM_DATA);
-}
-
-void __init init_prep_nvram(void)
-{
-	unsigned char *nvp;
-	int  i;
-	int  nvramSize;
-
-	/*
-	 * The following could fail if the NvRAM were corrupt but
-	 * we expect the boot firmware to have checked its checksum
-	 * before boot
-	 */
-	nvp = (char *) &nvram->Header;
-	for (i=0; i<sizeof(HEADER); i++)
-	{
-		*nvp = ppc_md.nvram_read_val(i);
-		nvp++;
-	}
-
-	/*
-	 * The PReP NvRAM may be any size so read in the header to
-	 * determine how much we must read in order to get the complete
-	 * GE area
-	 */
-	nvramSize=(int)nvram->Header.GEAddress+nvram->Header.GELength;
-	if(nvramSize>MAX_PREP_NVRAM)
-	{
-		/*
-		 * NvRAM is too large
-		 */
-		nvram->Header.GELength=0;
-		return;
-	}
-
-	/*
-	 * Read the remainder of the PReP NvRAM
-	 */
-	nvp = (char *) &nvram->GEArea[0];
-	for (i=sizeof(HEADER); i<nvramSize; i++)
-	{
-		*nvp = ppc_md.nvram_read_val(i);
-		nvp++;
-	}
-}
-
-char *prep_nvram_get_var(const char *name)
-{
-	char *cp;
-	int  namelen;
-
-	namelen = strlen(name);
-	cp = prep_nvram_first_var();
-	while (cp != NULL) {
-		if ((strncmp(name, cp, namelen) == 0)
-		    && (cp[namelen] == '='))
-		{
-			return cp+namelen+1;
-		}
-		cp = prep_nvram_next_var(cp);
-	}
-
-	return NULL;
-}
-
-char *prep_nvram_first_var(void)
-{
-        if (nvram->Header.GELength == 0) {
-		return NULL;
-	} else {
-		return (((char *)nvram)
-			+ ((unsigned int) nvram->Header.GEAddress));
-	}
-}
-
-char *prep_nvram_next_var(char *name)
-{
-	char *cp;
-
-
-	cp = name;
-	while (((cp - ((char *) nvram->GEArea)) < nvram->Header.GELength)
-	       && (*cp != '\0'))
-	{
-		cp++;
-	}
-
-	/* Skip over any null characters. */
-	while (((cp - ((char *) nvram->GEArea)) < nvram->Header.GELength)
-	       && (*cp == '\0'))
-	{
-		cp++;
-	}
-
-	if ((cp - ((char *) nvram->GEArea)) < nvram->Header.GELength) {
-		return cp;
-	} else {
-		return NULL;
-	}
-}
diff --git a/arch/ppc/syslib/qspan_pci.c b/arch/ppc/syslib/qspan_pci.c
deleted file mode 100644
index 7a97c7440b30..000000000000
--- a/arch/ppc/syslib/qspan_pci.c
+++ /dev/null
@@ -1,380 +0,0 @@
-/*
- * QSpan pci routines.
- * Most 8xx boards use the QSpan PCI bridge.  The config address register
- * is located 0x500 from the base of the bridge control/status registers.
- * The data register is located at 0x504.
- * This is a two step operation.  First, the address register is written,
- * then the data register is read/written as required.
- * I don't know what to do about interrupts (yet).
- *
- * The RPX Classic implementation shares a chip select for normal
- * PCI access and QSpan control register addresses.  The selection is
- * further selected by a bit setting in a board control register.
- * Although it should happen, we disable interrupts during this operation
- * to make sure some driver doesn't accidentally access the PCI while
- * we have switched the chip select.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/string.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-#include <asm/mpc8xx.h>
-#include <asm/system.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-
-
-/*
- * This blows......
- * When reading the configuration space, if something does not respond
- * the bus times out and we get a machine check interrupt.  So, the
- * good ol' exception tables come to mind to trap it and return some
- * value.
- *
- * On an error we just return a -1, since that is what the caller wants
- * returned if nothing is present.  I copied this from __get_user_asm,
- * with the only difference of returning -1 instead of EFAULT.
- * There is an associated hack in the machine check trap code.
- *
- * The QSPAN is also a big endian device, that is it makes the PCI
- * look big endian to us.  This presents a problem for the Linux PCI
- * functions, which assume little endian.  For example, we see the
- * first 32-bit word like this:
- *	------------------------
- *	| Device ID | Vendor ID |
- *	------------------------
- * If we read/write as a double word, that's OK.  But in our world,
- * when read as a word, device ID is at location 0, not location 2 as
- * the little endian PCI would believe.  We have to switch bits in
- * the PCI addresses given to us to get the data to/from the correct
- * byte lanes.
- *
- * The QSPAN only supports 4 bits of "slot" in the dev_fn instead of 5.
- * It always forces the MS bit to zero.  Therefore, dev_fn values
- * greater than 128 are returned as "no device found" errors.
- *
- * The QSPAN can only perform long word (32-bit) configuration cycles.
- * The "offset" must have the two LS bits set to zero.  Read operations
- * require we read the entire word and then sort out what should be
- * returned.  Write operations other than long word require that we
- * read the long word, update the proper word or byte, then write the
- * entire long word back.
- *
- * PCI Bridge hack.  We assume (correctly) that bus 0 is the primary
- * PCI bus from the QSPAN.  If we are called with a bus number other
- * than zero, we create a Type 1 configuration access that a downstream
- * PCI bridge will interpret.
- */
-
-#define __get_qspan_pci_config(x, addr, op)		\
-	__asm__ __volatile__(				\
-		"1:	"op" %0,0(%1)\n"		\
-		"	eieio\n"			\
-		"2:\n"					\
-		".section .fixup,\"ax\"\n"		\
-		"3:	li %0,-1\n"			\
-		"	b 2b\n"				\
-		".section __ex_table,\"a\"\n"		\
-		"	.align 2\n"			\
-		"	.long 1b,3b\n"			\
-		".text"					\
-		: "=r"(x) : "r"(addr) : " %0")
-
-#define QS_CONFIG_ADDR	((volatile uint *)(PCI_CSR_ADDR + 0x500))
-#define QS_CONFIG_DATA	((volatile uint *)(PCI_CSR_ADDR + 0x504))
-
-#define mk_config_addr(bus, dev, offset) \
-	(((bus)<<16) | ((dev)<<8) | (offset & 0xfc))
-
-#define mk_config_type1(bus, dev, offset) \
-	mk_config_addr(bus, dev, offset) | 1;
-
-static DEFINE_SPINLOCK(pcibios_lock);
-
-int qspan_pcibios_read_config_byte(unsigned char bus, unsigned char dev_fn,
-				  unsigned char offset, unsigned char *val)
-{
-	uint	temp;
-	u_char	*cp;
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_qspan_pci_config(temp, QS_CONFIG_DATA, "lwz");
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	offset ^= 0x03;
-	cp = ((u_char *)&temp) + (offset & 0x03);
-	*val = *cp;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_read_config_word(unsigned char bus, unsigned char dev_fn,
-				  unsigned char offset, unsigned short *val)
-{
-	uint	temp;
-	ushort	*sp;
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_qspan_pci_config(temp, QS_CONFIG_DATA, "lwz");
-	offset ^= 0x02;
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	sp = ((ushort *)&temp) + ((offset >> 1) & 1);
-	*val = *sp;
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_read_config_dword(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned int *val)
-{
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127)) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	__get_qspan_pci_config(*val, QS_CONFIG_DATA, "lwz");
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_write_config_byte(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned char val)
-{
-	uint	temp;
-	u_char	*cp;
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	qspan_pcibios_read_config_dword(bus, dev_fn, offset, &temp);
-
-	offset ^= 0x03;
-	cp = ((u_char *)&temp) + (offset & 0x03);
-	*cp = val;
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*QS_CONFIG_DATA = temp;
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_write_config_word(unsigned char bus, unsigned char dev_fn,
-				   unsigned char offset, unsigned short val)
-{
-	uint	temp;
-	ushort	*sp;
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	qspan_pcibios_read_config_dword(bus, dev_fn, offset, &temp);
-
-	offset ^= 0x02;
-	sp = ((ushort *)&temp) + ((offset >> 1) & 1);
-	*sp = val;
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*QS_CONFIG_DATA = temp;
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_write_config_dword(unsigned char bus, unsigned char dev_fn,
-				    unsigned char offset, unsigned int val)
-{
-#ifdef CONFIG_RPXCLASSIC
-	unsigned long flags;
-#endif
-
-	if ((bus > 7) || (dev_fn > 127))
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-#ifdef CONFIG_RPXCLASSIC
-	/* disable interrupts */
-	spin_lock_irqsave(&pcibios_lock, flags);
-	*((uint *)RPX_CSR_ADDR) &= ~BCSR2_QSPACESEL;
-	eieio();
-#endif
-
-	if (bus == 0)
-		*QS_CONFIG_ADDR = mk_config_addr(bus, dev_fn, offset);
-	else
-		*QS_CONFIG_ADDR = mk_config_type1(bus, dev_fn, offset);
-	*(unsigned int *)QS_CONFIG_DATA = val;
-
-#ifdef CONFIG_RPXCLASSIC
-	*((uint *)RPX_CSR_ADDR) |= BCSR2_QSPACESEL;
-	eieio();
-	spin_unlock_irqrestore(&pcibios_lock, flags);
-#endif
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int qspan_pcibios_find_device(unsigned short vendor, unsigned short dev_id,
-			     unsigned short index, unsigned char *bus_ptr,
-			     unsigned char *dev_fn_ptr)
-{
-    int num, devfn;
-    unsigned int x, vendev;
-
-    if (vendor == 0xffff)
-	return PCIBIOS_BAD_VENDOR_ID;
-    vendev = (dev_id << 16) + vendor;
-    num = 0;
-    for (devfn = 0;  devfn < 32;  devfn++) {
-	qspan_pcibios_read_config_dword(0, devfn<<3, PCI_VENDOR_ID, &x);
-	if (x == vendev) {
-	    if (index == num) {
-		*bus_ptr = 0;
-		*dev_fn_ptr = devfn<<3;
-		return PCIBIOS_SUCCESSFUL;
-	    }
-	    ++num;
-	}
-    }
-    return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-int qspan_pcibios_find_class(unsigned int class_code, unsigned short index,
-			    unsigned char *bus_ptr, unsigned char *dev_fn_ptr)
-{
-    int devnr, x, num;
-
-    num = 0;
-    for (devnr = 0;  devnr < 32;  devnr++) {
-	qspan_pcibios_read_config_dword(0, devnr<<3, PCI_CLASS_REVISION, &x);
-	if ((x>>8) == class_code) {
-	    if (index == num) {
-		*bus_ptr = 0;
-		*dev_fn_ptr = devnr<<3;
-		return PCIBIOS_SUCCESSFUL;
-	    }
-	    ++num;
-	}
-    }
-    return PCIBIOS_DEVICE_NOT_FOUND;
-}
-
-void __init
-m8xx_pcibios_fixup(void)
-{
-   /* Lots to do here, all board and configuration specific. */
-}
-
-void __init
-m8xx_setup_pci_ptrs(void)
-{
-	set_config_access_method(qspan);
-
-	ppc_md.pcibios_fixup = m8xx_pcibios_fixup;
-}
-
diff --git a/arch/ppc/syslib/todc_time.c b/arch/ppc/syslib/todc_time.c
deleted file mode 100644
index a8168b8e5683..000000000000
--- a/arch/ppc/syslib/todc_time.c
+++ /dev/null
@@ -1,511 +0,0 @@
-/*
- * Time of Day Clock support for the M48T35, M48T37, M48T59, and MC146818
- * Real Time Clocks/Timekeepers.
- *
- * Author: Mark A. Greer
- *         mgreer@mvista.com
- *
- * 2001-2004 (c) MontaVista, Software, Inc.  This file is licensed under
- * the terms of the GNU General Public License version 2.  This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/bcd.h>
-#include <linux/mc146818rtc.h>
-
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/time.h>
-#include <asm/todc.h>
-
-/*
- * Depending on the hardware on your board and your board design, the
- * RTC/NVRAM may be accessed either directly (like normal memory) or via
- * address/data registers.  If your board uses the direct method, set
- * 'nvram_data' to the base address of your nvram and leave 'nvram_as0' and
- * 'nvram_as1' NULL.  If your board uses address/data regs to access nvram,
- * set 'nvram_as0' to the address of the lower byte, set 'nvram_as1' to the
- * address of the upper byte (leave NULL if using mc146818), and set
- * 'nvram_data' to the address of the 8-bit data register.
- *
- * In order to break the assumption that the RTC and NVRAM are accessed by
- * the same mechanism, you need to explicitly set 'ppc_md.rtc_read_val' and
- * 'ppc_md.rtc_write_val', otherwise the values of 'ppc_md.rtc_read_val'
- * and 'ppc_md.rtc_write_val' will be used.
- *
- * Note: Even though the documentation for the various RTC chips say that it
- * 	 take up to a second before it starts updating once the 'R' bit is
- * 	 cleared, they always seem to update even though we bang on it many
- * 	 times a second.  This is true, except for the Dallas Semi 1746/1747
- * 	 (possibly others).  Those chips seem to have a real problem whenever
- * 	 we set the 'R' bit before reading them, they basically stop counting.
- * 	 					--MAG
- */
-
-/*
- * 'todc_info' should be initialized in your *_setup.c file to
- * point to a fully initialized 'todc_info_t' structure.
- * This structure holds all the register offsets for your particular
- * TODC/RTC chip.
- * TODC_ALLOC()/TODC_INIT() will allocate and initialize this table for you.
- */
-
-#ifdef	RTC_FREQ_SELECT
-#undef	RTC_FREQ_SELECT
-#define	RTC_FREQ_SELECT		control_b	/* Register A */
-#endif
-
-#ifdef	RTC_CONTROL
-#undef	RTC_CONTROL
-#define	RTC_CONTROL		control_a	/* Register B */
-#endif
-
-#ifdef	RTC_INTR_FLAGS
-#undef	RTC_INTR_FLAGS
-#define	RTC_INTR_FLAGS		watchdog	/* Register C */
-#endif
-
-#ifdef	RTC_VALID
-#undef	RTC_VALID
-#define	RTC_VALID		interrupts	/* Register D */
-#endif
-
-/* Access routines when RTC accessed directly (like normal memory) */
-u_char
-todc_direct_read_val(int addr)
-{
-	return readb((void __iomem *)(todc_info->nvram_data + addr));
-}
-
-void
-todc_direct_write_val(int addr, unsigned char val)
-{
-	writeb(val, (void __iomem *)(todc_info->nvram_data + addr));
-	return;
-}
-
-/* Access routines for accessing m48txx type chips via addr/data regs */
-u_char
-todc_m48txx_read_val(int addr)
-{
-	outb(addr, todc_info->nvram_as0);
-	outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
-	return inb(todc_info->nvram_data);
-}
-
-void
-todc_m48txx_write_val(int addr, unsigned char val)
-{
-	outb(addr, todc_info->nvram_as0);
-	outb(addr>>todc_info->as0_bits, todc_info->nvram_as1);
-   	outb(val, todc_info->nvram_data);
-	return;
-}
-
-/* Access routines for accessing mc146818 type chips via addr/data regs */
-u_char
-todc_mc146818_read_val(int addr)
-{
-	outb_p(addr, todc_info->nvram_as0);
-	return inb_p(todc_info->nvram_data);
-}
-
-void
-todc_mc146818_write_val(int addr, unsigned char val)
-{
-	outb_p(addr, todc_info->nvram_as0);
-   	outb_p(val, todc_info->nvram_data);
-}
-
-
-/*
- * Routines to make RTC chips with NVRAM buried behind an addr/data pair
- * have the NVRAM and clock regs appear at the same level.
- * The NVRAM will appear to start at addr 0 and the clock regs will appear
- * to start immediately after the NVRAM (actually, start at offset
- * todc_info->nvram_size).
- */
-static inline u_char
-todc_read_val(int addr)
-{
-	u_char	val;
-
-	if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
-		if (addr < todc_info->nvram_size) { /* NVRAM */
-			ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
-			val = ppc_md.rtc_read_val(todc_info->nvram_data_reg);
-		}
-		else { /* Clock Reg */
-			addr -= todc_info->nvram_size;
-			val = ppc_md.rtc_read_val(addr);
-		}
-	}
-	else {
-		val = ppc_md.rtc_read_val(addr);
-	}
-
-	return val;
-}
-
-static inline void
-todc_write_val(int addr, u_char val)
-{
-	if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) {
-		if (addr < todc_info->nvram_size) { /* NVRAM */
-			ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr);
-			ppc_md.rtc_write_val(todc_info->nvram_data_reg, val);
-		}
-		else { /* Clock Reg */
-			addr -= todc_info->nvram_size;
-			ppc_md.rtc_write_val(addr, val);
-		}
-	}
-	else {
-		ppc_md.rtc_write_val(addr, val);
-	}
-}
-
-/*
- * TODC routines
- *
- * There is some ugly stuff in that there are assumptions for the mc146818.
- *
- * Assumptions:
- *	- todc_info->control_a has the offset as mc146818 Register B reg
- *	- todc_info->control_b has the offset as mc146818 Register A reg
- *	- m48txx control reg's write enable or 'W' bit is same as
- *	  mc146818 Register B 'SET' bit (i.e., 0x80)
- *
- * These assumptions were made to make the code simpler.
- */
-long __init
-todc_time_init(void)
-{
-	u_char	cntl_b;
-
-	if (!ppc_md.rtc_read_val)
-		ppc_md.rtc_read_val = ppc_md.nvram_read_val;
-	if (!ppc_md.rtc_write_val)
-		ppc_md.rtc_write_val = ppc_md.nvram_write_val;
-	
-	cntl_b = todc_read_val(todc_info->control_b);
-
-	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-		if ((cntl_b & 0x70) != 0x20) {
-			printk(KERN_INFO "TODC %s %s\n",
-				"real-time-clock was stopped.",
-				"Now starting...");
-			cntl_b &= ~0x70;
-			cntl_b |= 0x20;
-		}
-
-		todc_write_val(todc_info->control_b, cntl_b);
-	} else if (todc_info->rtc_type == TODC_TYPE_DS17285) {
-		u_char mode;
-
-		mode = todc_read_val(TODC_TYPE_DS17285_CNTL_A);
-		/* Make sure countdown clear is not set */
-		mode &= ~0x40;
-		/* Enable oscillator, extended register set */
-		mode |= 0x30;
-		todc_write_val(TODC_TYPE_DS17285_CNTL_A, mode);
-
-	} else if (todc_info->rtc_type == TODC_TYPE_DS1501) {
-		u_char	month;
-
-		todc_info->enable_read = TODC_DS1501_CNTL_B_TE;
-		todc_info->enable_write = TODC_DS1501_CNTL_B_TE;
-
-		month = todc_read_val(todc_info->month);
-
-		if ((month & 0x80) == 0x80) {
-			printk(KERN_INFO "TODC %s %s\n",
-				"real-time-clock was stopped.",
-				"Now starting...");
-			month &= ~0x80;
-			todc_write_val(todc_info->month, month);
-		}
-
-		cntl_b &= ~TODC_DS1501_CNTL_B_TE;
-		todc_write_val(todc_info->control_b, cntl_b);
-	} else { /* must be a m48txx type */
-		u_char	cntl_a;
-
-		todc_info->enable_read = TODC_MK48TXX_CNTL_A_R;
-		todc_info->enable_write = TODC_MK48TXX_CNTL_A_W;
-
-		cntl_a = todc_read_val(todc_info->control_a);
-
-		/* Check & clear STOP bit in control B register */
-		if (cntl_b & TODC_MK48TXX_DAY_CB) {
-			printk(KERN_INFO "TODC %s %s\n",
-				"real-time-clock was stopped.",
-				"Now starting...");
-
-			cntl_a |= todc_info->enable_write;
-			cntl_b &= ~TODC_MK48TXX_DAY_CB;/* Start Oscil */
-
-			todc_write_val(todc_info->control_a, cntl_a);
-			todc_write_val(todc_info->control_b, cntl_b);
-		}
-
-		/* Make sure READ & WRITE bits are cleared. */
-		cntl_a &= ~(todc_info->enable_write |
-			    todc_info->enable_read);
-		todc_write_val(todc_info->control_a, cntl_a);
-	}
-
-	return 0;
-}
-
-/*
- * There is some ugly stuff in that there are assumptions that for a mc146818,
- * the todc_info->control_a has the offset of the mc146818 Register B reg and
- * that the register'ss 'SET' bit is the same as the m48txx's write enable
- * bit in the control register of the m48txx (i.e., 0x80).
- *
- * It was done to make the code look simpler.
- */
-ulong
-todc_get_rtc_time(void)
-{
-	uint	year = 0, mon = 0, day = 0, hour = 0, min = 0, sec = 0;
-	uint	limit, i;
-	u_char	save_control, uip = 0;
-
-	spin_lock(&rtc_lock);
-	save_control = todc_read_val(todc_info->control_a);
-
-	if (todc_info->rtc_type != TODC_TYPE_MC146818) {
-		limit = 1;
-
-		switch (todc_info->rtc_type) {
-			case TODC_TYPE_DS1553:
-			case TODC_TYPE_DS1557:
-			case TODC_TYPE_DS1743:
-			case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-			case TODC_TYPE_DS1747:
-			case TODC_TYPE_DS17285:
-				break;
-			default:
-				todc_write_val(todc_info->control_a,
-				       (save_control | todc_info->enable_read));
-		}
-	}
-	else {
-		limit = 100000000;
-	}
-
-	for (i=0; i<limit; i++) {
-		if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-			uip = todc_read_val(todc_info->RTC_FREQ_SELECT);
-		}
-
-		sec = todc_read_val(todc_info->seconds) & 0x7f;
-		min = todc_read_val(todc_info->minutes) & 0x7f;
-		hour = todc_read_val(todc_info->hours) & 0x3f;
-		day = todc_read_val(todc_info->day_of_month) & 0x3f;
-		mon = todc_read_val(todc_info->month) & 0x1f;
-		year = todc_read_val(todc_info->year) & 0xff;
-
-		if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-			uip |= todc_read_val(todc_info->RTC_FREQ_SELECT);
-			if ((uip & RTC_UIP) == 0) break;
-		}
-	}
-
-	if (todc_info->rtc_type != TODC_TYPE_MC146818) {
-		switch (todc_info->rtc_type) {
-			case TODC_TYPE_DS1553:
-			case TODC_TYPE_DS1557:
-			case TODC_TYPE_DS1743:
-			case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-			case TODC_TYPE_DS1747:
-			case TODC_TYPE_DS17285:
-				break;
-			default:
-				save_control &= ~(todc_info->enable_read);
-				todc_write_val(todc_info->control_a,
-						       save_control);
-		}
-	}
-	spin_unlock(&rtc_lock);
-
-	if ((todc_info->rtc_type != TODC_TYPE_MC146818) ||
-	    ((save_control & RTC_DM_BINARY) == 0) ||
-	    RTC_ALWAYS_BCD) {
-
-		BCD_TO_BIN(sec);
-		BCD_TO_BIN(min);
-		BCD_TO_BIN(hour);
-		BCD_TO_BIN(day);
-		BCD_TO_BIN(mon);
-		BCD_TO_BIN(year);
-	}
-
-	year = year + 1900;
-	if (year < 1970) {
-		year += 100;
-	}
-
-	return mktime(year, mon, day, hour, min, sec);
-}
-
-int
-todc_set_rtc_time(unsigned long nowtime)
-{
-	struct rtc_time	tm;
-	u_char		save_control, save_freq_select = 0;
-
-	spin_lock(&rtc_lock);
-	to_tm(nowtime, &tm);
-
-	save_control = todc_read_val(todc_info->control_a);
-
-	/* Assuming MK48T59_RTC_CA_WRITE & RTC_SET are equal */
-	todc_write_val(todc_info->control_a,
-			       (save_control | todc_info->enable_write));
-	save_control &= ~(todc_info->enable_write); /* in case it was set */
-
-	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-		save_freq_select = todc_read_val(todc_info->RTC_FREQ_SELECT);
-		todc_write_val(todc_info->RTC_FREQ_SELECT,
-				       save_freq_select | RTC_DIV_RESET2);
-	}
-
-
-        tm.tm_year = (tm.tm_year - 1900) % 100;
-
-	if ((todc_info->rtc_type != TODC_TYPE_MC146818) ||
-	    ((save_control & RTC_DM_BINARY) == 0) ||
-	    RTC_ALWAYS_BCD) {
-
-		BIN_TO_BCD(tm.tm_sec);
-		BIN_TO_BCD(tm.tm_min);
-		BIN_TO_BCD(tm.tm_hour);
-		BIN_TO_BCD(tm.tm_mon);
-		BIN_TO_BCD(tm.tm_mday);
-		BIN_TO_BCD(tm.tm_year);
-	}
-
-	todc_write_val(todc_info->seconds,      tm.tm_sec);
-	todc_write_val(todc_info->minutes,      tm.tm_min);
-	todc_write_val(todc_info->hours,        tm.tm_hour);
-	todc_write_val(todc_info->month,        tm.tm_mon);
-	todc_write_val(todc_info->day_of_month, tm.tm_mday);
-	todc_write_val(todc_info->year,         tm.tm_year);
-
-	todc_write_val(todc_info->control_a, save_control);
-
-	if (todc_info->rtc_type == TODC_TYPE_MC146818) {
-		todc_write_val(todc_info->RTC_FREQ_SELECT, save_freq_select);
-	}
-	spin_unlock(&rtc_lock);
-
-	return 0;
-}
-
-/*
- * Manipulates read bit to reliably read seconds at a high rate.
- */
-static unsigned char __init todc_read_timereg(int addr)
-{
-	unsigned char save_control = 0, val;
-
-	switch (todc_info->rtc_type) {
-		case TODC_TYPE_DS1553:
-		case TODC_TYPE_DS1557:
-		case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-		case TODC_TYPE_DS1747:
-		case TODC_TYPE_DS17285:
-		case TODC_TYPE_MC146818:
-			break;
-		default:
-			save_control = todc_read_val(todc_info->control_a);
-			todc_write_val(todc_info->control_a,
-				       (save_control | todc_info->enable_read));
-	}
-	val = todc_read_val(addr);
-
-	switch (todc_info->rtc_type) {
-		case TODC_TYPE_DS1553:
-		case TODC_TYPE_DS1557:
-		case TODC_TYPE_DS1746:	/* XXXX BAD HACK -> FIX */
-		case TODC_TYPE_DS1747:
-		case TODC_TYPE_DS17285:
-		case TODC_TYPE_MC146818:
-			break;
-		default:
-			save_control &= ~(todc_info->enable_read);
-			todc_write_val(todc_info->control_a, save_control);
-	}
-
-	return val;
-}
-
-/*
- * This was taken from prep_setup.c
- * Use the NVRAM RTC to time a second to calibrate the decrementer.
- */
-void __init
-todc_calibrate_decr(void)
-{
-	ulong	freq;
-	ulong	tbl, tbu;
-        long	i, loop_count;
-        u_char	sec;
-
-	todc_time_init();
-
-	/*
-	 * Actually this is bad for precision, we should have a loop in
-	 * which we only read the seconds counter. todc_read_val writes
-	 * the address bytes on every call and this takes a lot of time.
-	 * Perhaps an nvram_wait_change method returning a time
-	 * stamp with a loop count as parameter would be the solution.
-	 */
-	/*
-	 * Need to make sure the tbl doesn't roll over so if tbu increments
-	 * during this test, we need to do it again.
-	 */
-	loop_count = 0;
-
-	sec = todc_read_timereg(todc_info->seconds) & 0x7f;
-
-	do {
-		tbu = get_tbu();
-
-		for (i = 0 ; i < 10000000 ; i++) {/* may take up to 1 second */
-		   tbl = get_tbl();
-
-		   if ((todc_read_timereg(todc_info->seconds) & 0x7f) != sec) {
-		      break;
-		   }
-		}
-
-		sec = todc_read_timereg(todc_info->seconds) & 0x7f;
-
-		for (i = 0 ; i < 10000000 ; i++) { /* Should take 1 second */
-		   freq = get_tbl();
-
-		   if ((todc_read_timereg(todc_info->seconds) & 0x7f) != sec) {
-		      break;
-		   }
-		}
-
-		freq -= tbl;
-	} while ((get_tbu() != tbu) && (++loop_count < 2));
-
-	printk("time_init: decrementer frequency = %lu.%.6lu MHz\n",
-	       freq/1000000, freq%1000000);
-
-	tb_ticks_per_jiffy = freq / HZ;
-	tb_to_us = mulhwu_scale_factor(freq, 1000000);
-
-	return;
-}
diff --git a/arch/ppc/syslib/virtex_devices.c b/arch/ppc/syslib/virtex_devices.c
deleted file mode 100644
index 7322781be1c6..000000000000
--- a/arch/ppc/syslib/virtex_devices.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- * Virtex hard ppc405 core common device listing
- *
- * Copyright 2005-2007 Secret Lab Technologies Ltd.
- * Copyright 2005 Freescale Semiconductor Inc.
- * Copyright 2002-2004 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/serial_8250.h>
-#include <syslib/virtex_devices.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-#include <asm/io.h>
-
-/*
- * UARTLITE: shortcut macro for single instance
- */
-#define XPAR_UARTLITE(num) { \
-	.name = "uartlite", \
-	.id = num, \
-	.num_resources = 2, \
-	.resource = (struct resource[]) { \
-		{ \
-			.start = XPAR_UARTLITE_##num##_BASEADDR + 3, \
-			.end = XPAR_UARTLITE_##num##_HIGHADDR, \
-			.flags = IORESOURCE_MEM, \
-		}, \
-		{ \
-			.start = XPAR_INTC_0_UARTLITE_##num##_VEC_ID, \
-			.flags = IORESOURCE_IRQ, \
-		}, \
-	}, \
-}
-
-/*
- * Full UART: shortcut macro for single instance + platform data structure
- */
-#define XPAR_UART(num) { \
-	.mapbase = XPAR_UARTNS550_##num##_BASEADDR + 3, \
-	.irq = XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
-	.iotype = UPIO_MEM, \
-	.uartclk = XPAR_UARTNS550_##num##_CLOCK_FREQ_HZ, \
-	.flags = UPF_BOOT_AUTOCONF, \
-	.regshift = 2, \
-}
-
-/*
- * SystemACE: shortcut macro for single instance
- */
-#define XPAR_SYSACE(num) { \
-	.name		= "xsysace", \
-	.id		= XPAR_SYSACE_##num##_DEVICE_ID, \
-	.num_resources	= 2, \
-	.resource = (struct resource[]) { \
-		{ \
-			.start	= XPAR_SYSACE_##num##_BASEADDR, \
-			.end	= XPAR_SYSACE_##num##_HIGHADDR, \
-			.flags	= IORESOURCE_MEM, \
-		}, \
-		{ \
-			.start	= XPAR_INTC_0_SYSACE_##num##_VEC_ID, \
-			.flags	= IORESOURCE_IRQ, \
-		}, \
-	}, \
-}
-
-/*
- * ML300/ML403 Video Device: shortcut macro for single instance
- */
-#define XPAR_TFT(num) { \
-	.name = "xilinxfb", \
-	.id = num, \
-	.num_resources = 1, \
-	.resource = (struct resource[]) { \
-		{ \
-			.start = XPAR_TFT_##num##_BASEADDR, \
-			.end = XPAR_TFT_##num##_BASEADDR+7, \
-			.flags = IORESOURCE_IO, \
-		}, \
-	}, \
-}
-
-#define XPAR_AC97_CONTROLLER_REFERENCE(num) { \
-	.name = "ml403_ac97cr", \
-	.id = num, \
-	.num_resources = 3, \
-	.resource = (struct resource[]) { \
-		{ \
-			.start = XPAR_OPB_AC97_CONTROLLER_REF_##num##_BASEADDR, \
-			.end = XPAR_OPB_AC97_CONTROLLER_REF_##num##_HIGHADDR, \
-			.flags = IORESOURCE_MEM, \
-		}, \
-		{ \
-			.start = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_PLAYBACK_VEC_ID, \
-			.end = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_PLAYBACK_VEC_ID, \
-			.flags = IORESOURCE_IRQ, \
-		}, \
-		{ \
-			.start = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_RECORD_VEC_ID, \
-			.end = XPAR_INTC_0_AC97_CONTROLLER_REF_##num##_RECORD_VEC_ID, \
-			.flags = IORESOURCE_IRQ, \
-		}, \
-	}, \
-}
-
-/* UART 8250 driver platform data table */
-struct plat_serial8250_port virtex_serial_platform_data[] = {
-#if defined(XPAR_UARTNS550_0_BASEADDR)
-	XPAR_UART(0),
-#endif
-#if defined(XPAR_UARTNS550_1_BASEADDR)
-	XPAR_UART(1),
-#endif
-#if defined(XPAR_UARTNS550_2_BASEADDR)
-	XPAR_UART(2),
-#endif
-#if defined(XPAR_UARTNS550_3_BASEADDR)
-	XPAR_UART(3),
-#endif
-#if defined(XPAR_UARTNS550_4_BASEADDR)
-	XPAR_UART(4),
-#endif
-#if defined(XPAR_UARTNS550_5_BASEADDR)
-	XPAR_UART(5),
-#endif
-#if defined(XPAR_UARTNS550_6_BASEADDR)
-	XPAR_UART(6),
-#endif
-#if defined(XPAR_UARTNS550_7_BASEADDR)
-	XPAR_UART(7),
-#endif
-	{ }, /* terminated by empty record */
-};
-
-
-struct platform_device virtex_platform_devices[] = {
-	/* UARTLITE instances */
-#if defined(XPAR_UARTLITE_0_BASEADDR)
-	XPAR_UARTLITE(0),
-#endif
-#if defined(XPAR_UARTLITE_1_BASEADDR)
-	XPAR_UARTLITE(1),
-#endif
-#if defined(XPAR_UARTLITE_2_BASEADDR)
-	XPAR_UARTLITE(2),
-#endif
-#if defined(XPAR_UARTLITE_3_BASEADDR)
-	XPAR_UARTLITE(3),
-#endif
-#if defined(XPAR_UARTLITE_4_BASEADDR)
-	XPAR_UARTLITE(4),
-#endif
-#if defined(XPAR_UARTLITE_5_BASEADDR)
-	XPAR_UARTLITE(5),
-#endif
-#if defined(XPAR_UARTLITE_6_BASEADDR)
-	XPAR_UARTLITE(6),
-#endif
-#if defined(XPAR_UARTLITE_7_BASEADDR)
-	XPAR_UARTLITE(7),
-#endif
-
-	/* Full UART instances */
-#if defined(XPAR_UARTNS550_0_BASEADDR)
-	{
-		.name		= "serial8250",
-		.id		= 0,
-		.dev.platform_data = virtex_serial_platform_data,
-	},
-#endif
-
-	/* SystemACE instances */
-#if defined(XPAR_SYSACE_0_BASEADDR)
-	XPAR_SYSACE(0),
-#endif
-#if defined(XPAR_SYSACE_1_BASEADDR)
-	XPAR_SYSACE(1),
-#endif
-
-#if defined(XPAR_TFT_0_BASEADDR)
-	XPAR_TFT(0),
-#endif
-#if defined(XPAR_TFT_1_BASEADDR)
-	XPAR_TFT(1),
-#endif
-#if defined(XPAR_TFT_2_BASEADDR)
-	XPAR_TFT(2),
-#endif
-#if defined(XPAR_TFT_3_BASEADDR)
-	XPAR_TFT(3),
-#endif
-
-	/* AC97 Controller Reference instances */
-#if defined(XPAR_OPB_AC97_CONTROLLER_REF_0_BASEADDR)
-	XPAR_AC97_CONTROLLER_REFERENCE(0),
-#endif
-#if defined(XPAR_OPB_AC97_CONTROLLER_REF_1_BASEADDR)
-	XPAR_AC97_CONTROLLER_REFERENCE(1),
-#endif
-};
-
-/* Early serial support functions */
-static void __init
-virtex_early_serial_init(int num, struct plat_serial8250_port *pdata)
-{
-#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
-	struct uart_port serial_req;
-
-	memset(&serial_req, 0, sizeof(serial_req));
-	serial_req.mapbase	= pdata->mapbase;
-	serial_req.membase	= pdata->membase;
-	serial_req.irq		= pdata->irq;
-	serial_req.uartclk	= pdata->uartclk;
-	serial_req.regshift	= pdata->regshift;
-	serial_req.iotype	= pdata->iotype;
-	serial_req.flags	= pdata->flags;
-	gen550_init(num, &serial_req);
-#endif
-}
-
-void __init
-virtex_early_serial_map(void)
-{
-#ifdef CONFIG_SERIAL_8250
-	struct plat_serial8250_port *pdata;
-	int i = 0;
-
-	pdata = virtex_serial_platform_data;
-	while(pdata && pdata->flags) {
-		pdata->membase = ioremap(pdata->mapbase, 0x100);
-		virtex_early_serial_init(i, pdata);
-		pdata++;
-		i++;
-	}
-#endif /* CONFIG_SERIAL_8250 */
-}
-
-/*
- * default fixup routine; do nothing and return success.
- *
- * Reimplement this routine in your custom board support file to
- * override the default behaviour
- */
-int __attribute__ ((weak))
-virtex_device_fixup(struct platform_device *dev)
-{
-	return 0;
-}
-
-static int __init virtex_init(void)
-{
-	struct platform_device *index = virtex_platform_devices;
-	unsigned int ret = 0;
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(virtex_platform_devices); i++, index++) {
-		if (virtex_device_fixup(index) != 0)
-			continue;
-
-		if (platform_device_register(index)) {
-			ret = 1;
-			printk(KERN_ERR "cannot register dev %s:%d\n",
-			       index->name, index->id);
-		}
-	}
-	return ret;
-}
-
-subsys_initcall(virtex_init);
diff --git a/arch/ppc/syslib/virtex_devices.h b/arch/ppc/syslib/virtex_devices.h
deleted file mode 100644
index 6ebd9b4b8f1c..000000000000
--- a/arch/ppc/syslib/virtex_devices.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Common support header for virtex ppc405 platforms
- *
- * Copyright 2007 Secret Lab Technologies Ltd.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
-
-#ifndef __ASM_VIRTEX_DEVICES_H__
-#define __ASM_VIRTEX_DEVICES_H__
-
-#include <linux/platform_device.h>
-#include <linux/xilinxfb.h>
-
-void __init virtex_early_serial_map(void);
-
-/* Prototype for device fixup routine.  Implement this routine in the
- * board specific fixup code and the generic setup code will call it for
- * each device is the platform device list.
- *
- * If the hook returns a non-zero value, then the device will not get
- * registered with the platform bus
- */
-int virtex_device_fixup(struct platform_device *dev);
-
-/* SPI Controller IP */
-struct xspi_platform_data {
-	s16 bus_num;
-	u16 num_chipselect;
-	u32 speed_hz;
-};
-
-#endif  /* __ASM_VIRTEX_DEVICES_H__ */
diff --git a/arch/ppc/syslib/xilinx_pic.c b/arch/ppc/syslib/xilinx_pic.c
deleted file mode 100644
index 3b82333e96d8..000000000000
--- a/arch/ppc/syslib/xilinx_pic.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * Interrupt controller driver for Xilinx Virtex-II Pro.
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/io.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-#include <asm/ibm4xx.h>
-#include <asm/machdep.h>
-
-/* No one else should require these constants, so define them locally here. */
-#define ISR 0			/* Interrupt Status Register */
-#define IPR 1			/* Interrupt Pending Register */
-#define IER 2			/* Interrupt Enable Register */
-#define IAR 3			/* Interrupt Acknowledge Register */
-#define SIE 4			/* Set Interrupt Enable bits */
-#define CIE 5			/* Clear Interrupt Enable bits */
-#define IVR 6			/* Interrupt Vector Register */
-#define MER 7			/* Master Enable Register */
-
-#if XPAR_XINTC_USE_DCR == 0
-static volatile u32 *intc;
-#define intc_out_be32(addr, mask)     out_be32((addr), (mask))
-#define intc_in_be32(addr)            in_be32((addr))
-#else
-#define intc    XPAR_INTC_0_BASEADDR
-#define intc_out_be32(addr, mask)     mtdcr((addr), (mask))
-#define intc_in_be32(addr)            mfdcr((addr))
-#endif
-
-static void
-xilinx_intc_enable(unsigned int irq)
-{
-	unsigned long mask = (0x00000001 << (irq & 31));
-	pr_debug("enable: %d\n", irq);
-	intc_out_be32(intc + SIE, mask);
-}
-
-static void
-xilinx_intc_disable(unsigned int irq)
-{
-	unsigned long mask = (0x00000001 << (irq & 31));
-	pr_debug("disable: %d\n", irq);
-	intc_out_be32(intc + CIE, mask);
-}
-
-static void
-xilinx_intc_disable_and_ack(unsigned int irq)
-{
-	unsigned long mask = (0x00000001 << (irq & 31));
-	pr_debug("disable_and_ack: %d\n", irq);
-	intc_out_be32(intc + CIE, mask);
-	if (!(irq_desc[irq].status & IRQ_LEVEL))
-		intc_out_be32(intc + IAR, mask);	/* ack edge triggered intr */
-}
-
-static void
-xilinx_intc_end(unsigned int irq)
-{
-	unsigned long mask = (0x00000001 << (irq & 31));
-
-	pr_debug("end: %d\n", irq);
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
-		intc_out_be32(intc + SIE, mask);
-		/* ack level sensitive intr */
-		if (irq_desc[irq].status & IRQ_LEVEL)
-			intc_out_be32(intc + IAR, mask);
-	}
-}
-
-static struct hw_interrupt_type xilinx_intc = {
-	.typename = "Xilinx Interrupt Controller",
-	.enable = xilinx_intc_enable,
-	.disable = xilinx_intc_disable,
-	.ack = xilinx_intc_disable_and_ack,
-	.end = xilinx_intc_end,
-};
-
-int
-xilinx_pic_get_irq(void)
-{
-	int irq;
-
-	/*
-	 * NOTE: This function is the one that needs to be improved in
-	 * order to handle multiple interrupt controllers.  It currently
-	 * is hardcoded to check for interrupts only on the first INTC.
-	 */
-
-	irq = intc_in_be32(intc + IVR);
-	if (irq != -1)
-		irq = irq;
-
-	pr_debug("get_irq: %d\n", irq);
-
-	return (irq);
-}
-
-void __init
-ppc4xx_pic_init(void)
-{
-	int i;
-
-	/*
-	 * NOTE: The assumption here is that NR_IRQS is 32 or less
-	 * (NR_IRQS is 32 for PowerPC 405 cores by default).
-	 */
-#if (NR_IRQS > 32)
-#error NR_IRQS > 32 not supported
-#endif
-
-#if XPAR_XINTC_USE_DCR == 0
-	intc = ioremap(XPAR_INTC_0_BASEADDR, 32);
-
-	printk(KERN_INFO "Xilinx INTC #0 at 0x%08lX mapped to 0x%08lX\n",
-	       (unsigned long) XPAR_INTC_0_BASEADDR, (unsigned long) intc);
-#else
-	printk(KERN_INFO "Xilinx INTC #0 at 0x%08lX (DCR)\n",
-	       (unsigned long) XPAR_INTC_0_BASEADDR);
-#endif
-
-	/*
-	 * Disable all external interrupts until they are
-	 * explicitly requested.
-	 */
-	intc_out_be32(intc + IER, 0);
-
-	/* Acknowledge any pending interrupts just in case. */
-	intc_out_be32(intc + IAR, ~(u32) 0);
-
-	/* Turn on the Master Enable. */
-	intc_out_be32(intc + MER, 0x3UL);
-
-	ppc_md.get_irq = xilinx_pic_get_irq;
-
-	for (i = 0; i < NR_IRQS; ++i) {
-		irq_desc[i].chip = &xilinx_intc;
-
-		if (XPAR_INTC_0_KIND_OF_INTR & (0x00000001 << i))
-			irq_desc[i].status &= ~IRQ_LEVEL;
-		else
-			irq_desc[i].status |= IRQ_LEVEL;
-	}
-}
diff --git a/arch/ppc/xmon/Makefile b/arch/ppc/xmon/Makefile
deleted file mode 100644
index 9aa260b926f5..000000000000
--- a/arch/ppc/xmon/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# Makefile for xmon
-
-ifdef CONFIG_8xx
-obj-y		:= start_8xx.o
-else
-obj-y		:= start.o
-endif
-obj-y		+= xmon.o ppc-dis.o ppc-opc.o subr_prf.o setjmp.o
diff --git a/arch/ppc/xmon/ansidecl.h b/arch/ppc/xmon/ansidecl.h
deleted file mode 100644
index c9b9f0929e9e..000000000000
--- a/arch/ppc/xmon/ansidecl.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/* ANSI and traditional C compatibility macros
-   Copyright 1991, 1992 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-/* ANSI and traditional C compatibility macros
-
-   ANSI C is assumed if __STDC__ is #defined.
-
-   Macro	ANSI C definition	Traditional C definition
-   -----	---- - ----------	----------- - ----------
-   PTR		`void *'		`char *'
-   LONG_DOUBLE	`long double'		`double'
-   VOLATILE	`volatile'		`'
-   SIGNED	`signed'		`'
-   PTRCONST	`void *const'		`char *'
-   ANSI_PROTOTYPES  1			not defined
-
-   CONST is also defined, but is obsolete.  Just use const.
-
-   DEFUN (name, arglist, args)
-
-	Defines function NAME.
-
-	ARGLIST lists the arguments, separated by commas and enclosed in
-	parentheses.  ARGLIST becomes the argument list in traditional C.
-
-	ARGS list the arguments with their types.  It becomes a prototype in
-	ANSI C, and the type declarations in traditional C.  Arguments should
-	be separated with `AND'.  For functions with a variable number of
-	arguments, the last thing listed should be `DOTS'.
-
-   DEFUN_VOID (name)
-
-	Defines a function NAME, which takes no arguments.
-
-   obsolete --     EXFUN (name, (prototype))	-- obsolete.
-
-	Replaced by PARAMS.  Do not use; will disappear someday soon.
-	Was used in external function declarations.
-	In ANSI C it is `NAME PROTOTYPE' (so PROTOTYPE should be enclosed in
-	parentheses).  In traditional C it is `NAME()'.
-	For a function that takes no arguments, PROTOTYPE should be `(void)'.
-
-    PARAMS ((args))
-
-	We could use the EXFUN macro to handle prototype declarations, but
-	the name is misleading and the result is ugly.  So we just define a
-	simple macro to handle the parameter lists, as in:
-
-	      static int foo PARAMS ((int, char));
-
-	This produces:  `static int foo();' or `static int foo (int, char);'
-
-	EXFUN would have done it like this:
-
-	      static int EXFUN (foo, (int, char));
-
-	but the function is not external...and it's hard to visually parse
-	the function name out of the mess.   EXFUN should be considered
-	obsolete; new code should be written to use PARAMS.
-
-    For example:
-	extern int printf PARAMS ((CONST char *format DOTS));
-	int DEFUN(fprintf, (stream, format),
-		  FILE *stream AND CONST char *format DOTS) { ... }
-	void DEFUN_VOID(abort) { ... }
-*/
-
-#ifndef	_ANSIDECL_H
-
-#define	_ANSIDECL_H	1
-
-
-/* Every source file includes this file,
-   so they will all get the switch for lint.  */
-/* LINTLIBRARY */
-
-
-#if defined (__STDC__) || defined (_AIX) || (defined (__mips) && defined (_SYSTYPE_SVR4)) || defined(WIN32)
-/* All known AIX compilers implement these things (but don't always
-   define __STDC__).  The RISC/OS MIPS compiler defines these things
-   in SVR4 mode, but does not define __STDC__.  */
-
-#define	PTR		void *
-#define	PTRCONST	void *CONST
-#define	LONG_DOUBLE	long double
-
-#define	AND		,
-#define	NOARGS		void
-#define	CONST		const
-#define	VOLATILE	volatile
-#define	SIGNED		signed
-#define	DOTS		, ...
-
-#define	EXFUN(name, proto)		name proto
-#define	DEFUN(name, arglist, args)	name(args)
-#define	DEFUN_VOID(name)		name(void)
-
-#define PROTO(type, name, arglist)	type name arglist
-#define PARAMS(paramlist)		paramlist
-#define ANSI_PROTOTYPES			1
-
-#else	/* Not ANSI C.  */
-
-#define	PTR		char *
-#define	PTRCONST	PTR
-#define	LONG_DOUBLE	double
-
-#define	AND		;
-#define	NOARGS
-#define	CONST
-#ifndef const /* some systems define it in header files for non-ansi mode */
-#define	const
-#endif
-#define	VOLATILE
-#define	SIGNED
-#define	DOTS
-
-#define	EXFUN(name, proto)		name()
-#define	DEFUN(name, arglist, args)	name arglist args;
-#define	DEFUN_VOID(name)		name()
-#define PROTO(type, name, arglist) type name ()
-#define PARAMS(paramlist)		()
-
-#endif	/* ANSI C.  */
-
-#endif	/* ansidecl.h	*/
diff --git a/arch/ppc/xmon/nonstdio.h b/arch/ppc/xmon/nonstdio.h
deleted file mode 100644
index 0240bc573c96..000000000000
--- a/arch/ppc/xmon/nonstdio.h
+++ /dev/null
@@ -1,22 +0,0 @@
-typedef int	FILE;
-extern FILE *xmon_stdin, *xmon_stdout;
-#define EOF	(-1)
-#define stdin	xmon_stdin
-#define stdout	xmon_stdout
-#define printf	xmon_printf
-#define fprintf	xmon_fprintf
-#define fputs	xmon_fputs
-#define fgets	xmon_fgets
-#define putchar	xmon_putchar
-#define getchar	xmon_getchar
-#define putc	xmon_putc
-#define getc	xmon_getc
-#define fopen(n, m)	NULL
-#define fflush(f)	do {} while (0)
-#define fclose(f)	do {} while (0)
-extern char *fgets(char *, int, void *);
-extern void xmon_fprintf(void *, const char *, ...);
-extern void xmon_sprintf(char *, const char *, ...);
-extern void xmon_puts(char*);
-
-#define perror(s)	printf("%s: no files!\n", (s))
diff --git a/arch/ppc/xmon/ppc-dis.c b/arch/ppc/xmon/ppc-dis.c
deleted file mode 100644
index 798ac1a677f6..000000000000
--- a/arch/ppc/xmon/ppc-dis.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/* ppc-dis.c -- Disassemble PowerPC instructions
-   Copyright 1994 Free Software Foundation, Inc.
-   Written by Ian Lance Taylor, Cygnus Support
-
-This file is part of GDB, GAS, and the GNU binutils.
-
-GDB, GAS, and the GNU binutils are free software; you can redistribute
-them and/or modify them under the terms of the GNU General Public
-License as published by the Free Software Foundation; either version
-2, or (at your option) any later version.
-
-GDB, GAS, and the GNU binutils are distributed in the hope that they
-will be useful, but WITHOUT ANY WARRANTY; without even the implied
-warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this file; see the file COPYING.  If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include "nonstdio.h"
-#include "ansidecl.h"
-#include "ppc.h"
-
-static int print_insn_powerpc PARAMS ((FILE *, unsigned long insn,
-				       unsigned memaddr, int dialect));
-
-extern void print_address PARAMS((unsigned memaddr));
-
-/* Print a big endian PowerPC instruction.  For convenience, also
-   disassemble instructions supported by the Motorola PowerPC 601.  */
-
-int
-print_insn_big_powerpc (FILE *out, unsigned long insn, unsigned memaddr)
-{
-  return print_insn_powerpc (out, insn, memaddr,
-			     PPC_OPCODE_PPC | PPC_OPCODE_601);
-}
-
-/* Print a PowerPC or POWER instruction.  */
-
-static int
-print_insn_powerpc (FILE *out, unsigned long insn, unsigned memaddr,
-		    int dialect)
-{
-  const struct powerpc_opcode *opcode;
-  const struct powerpc_opcode *opcode_end;
-  unsigned long op;
-
-  /* Get the major opcode of the instruction.  */
-  op = PPC_OP (insn);
-
-  /* Find the first match in the opcode table.  We could speed this up
-     a bit by doing a binary search on the major opcode.  */
-  opcode_end = powerpc_opcodes + powerpc_num_opcodes;
-  for (opcode = powerpc_opcodes; opcode < opcode_end; opcode++)
-    {
-      unsigned long table_op;
-      const unsigned char *opindex;
-      const struct powerpc_operand *operand;
-      int invalid;
-      int need_comma;
-      int need_paren;
-
-      table_op = PPC_OP (opcode->opcode);
-      if (op < table_op)
-		break;
-      if (op > table_op)
-		continue;
-
-      if ((insn & opcode->mask) != opcode->opcode
-	  || (opcode->flags & dialect) == 0)
-		continue;
-
-      /* Make two passes over the operands.  First see if any of them
-		 have extraction functions, and, if they do, make sure the
-		 instruction is valid.  */
-      invalid = 0;
-      for (opindex = opcode->operands; *opindex != 0; opindex++)
-		{
-		  operand = powerpc_operands + *opindex;
-		  if (operand->extract)
-		    (*operand->extract) (insn, &invalid);
-		}
-      if (invalid)
-		continue;
-
-      /* The instruction is valid.  */
-      fprintf(out, "%s", opcode->name);
-      if (opcode->operands[0] != 0)
-		fprintf(out, "\t");
-
-      /* Now extract and print the operands.  */
-      need_comma = 0;
-      need_paren = 0;
-      for (opindex = opcode->operands; *opindex != 0; opindex++)
-		{
-		  long value;
-
-		  operand = powerpc_operands + *opindex;
-
-		  /* Operands that are marked FAKE are simply ignored.  We
-		     already made sure that the extract function considered
-		     the instruction to be valid.  */
-		  if ((operand->flags & PPC_OPERAND_FAKE) != 0)
-		    continue;
-
-		  /* Extract the value from the instruction.  */
-		  if (operand->extract)
-		    value = (*operand->extract) (insn, (int *) 0);
-		  else
-		    {
-		      value = (insn >> operand->shift) & ((1 << operand->bits) - 1);
-		      if ((operand->flags & PPC_OPERAND_SIGNED) != 0
-			  && (value & (1 << (operand->bits - 1))) != 0)
-			value -= 1 << operand->bits;
-		    }
-
-		  /* If the operand is optional, and the value is zero, don't
-		     print anything.  */
-		  if ((operand->flags & PPC_OPERAND_OPTIONAL) != 0
-		      && (operand->flags & PPC_OPERAND_NEXT) == 0
-		      && value == 0)
-		    continue;
-
-		  if (need_comma)
-		    {
-		      fprintf(out, ",");
-		      need_comma = 0;
-		    }
-
-		  /* Print the operand as directed by the flags.  */
-		  if ((operand->flags & PPC_OPERAND_GPR) != 0)
-		    fprintf(out, "r%ld", value);
-		  else if ((operand->flags & PPC_OPERAND_FPR) != 0)
-		    fprintf(out, "f%ld", value);
-		  else if ((operand->flags & PPC_OPERAND_RELATIVE) != 0)
-		    print_address (memaddr + value);
-		  else if ((operand->flags & PPC_OPERAND_ABSOLUTE) != 0)
-		    print_address (value & 0xffffffff);
-		  else if ((operand->flags & PPC_OPERAND_CR) == 0
-			   || (dialect & PPC_OPCODE_PPC) == 0)
-		    fprintf(out, "%ld", value);
-		  else
-		    {
-		      if (operand->bits == 3)
-				fprintf(out, "cr%d", value);
-		      else
-			{
-			  static const char *cbnames[4] = { "lt", "gt", "eq", "so" };
-			  int cr;
-			  int cc;
-
-			  cr = value >> 2;
-			  if (cr != 0)
-			    fprintf(out, "4*cr%d", cr);
-			  cc = value & 3;
-			  if (cc != 0)
-			    {
-			      if (cr != 0)
-					fprintf(out, "+");
-			      fprintf(out, "%s", cbnames[cc]);
-			    }
-			}
-	    }
-
-	  if (need_paren)
-	    {
-	      fprintf(out, ")");
-	      need_paren = 0;
-	    }
-
-	  if ((operand->flags & PPC_OPERAND_PARENS) == 0)
-	    need_comma = 1;
-	  else
-	    {
-	      fprintf(out, "(");
-	      need_paren = 1;
-	    }
-	}
-
-      /* We have found and printed an instruction; return.  */
-      return 4;
-    }
-
-  /* We could not find a match.  */
-  fprintf(out, ".long 0x%lx", insn);
-
-  return 4;
-}
diff --git a/arch/ppc/xmon/ppc-opc.c b/arch/ppc/xmon/ppc-opc.c
deleted file mode 100644
index 034313cef6e7..000000000000
--- a/arch/ppc/xmon/ppc-opc.c
+++ /dev/null
@@ -1,2720 +0,0 @@
-/* ppc-opc.c -- PowerPC opcode list
-   Copyright 1994 Free Software Foundation, Inc.
-   Written by Ian Lance Taylor, Cygnus Support
-
-This file is part of GDB, GAS, and the GNU binutils.
-
-GDB, GAS, and the GNU binutils are free software; you can redistribute
-them and/or modify them under the terms of the GNU General Public
-License as published by the Free Software Foundation; either version
-2, or (at your option) any later version.
-
-GDB, GAS, and the GNU binutils are distributed in the hope that they
-will be useful, but WITHOUT ANY WARRANTY; without even the implied
-warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this file; see the file COPYING.  If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include <linux/posix_types.h>
-#include <linux/kernel.h>
-#include "ansidecl.h"
-#include "ppc.h"
-
-/* This file holds the PowerPC opcode table.  The opcode table
-   includes almost all of the extended instruction mnemonics.  This
-   permits the disassembler to use them, and simplifies the assembler
-   logic, at the cost of increasing the table size.  The table is
-   strictly constant data, so the compiler should be able to put it in
-   the .text section.
-
-   This file also holds the operand table.  All knowledge about
-   inserting operands into instructions and vice-versa is kept in this
-   file.  */
-
-/* Local insertion and extraction functions.  */
-
-static unsigned long insert_bat PARAMS ((unsigned long, long, const char **));
-static long extract_bat PARAMS ((unsigned long, int *));
-static unsigned long insert_bba PARAMS ((unsigned long, long, const char **));
-static long extract_bba PARAMS ((unsigned long, int *));
-static unsigned long insert_bd PARAMS ((unsigned long, long, const char **));
-static long extract_bd PARAMS ((unsigned long, int *));
-static unsigned long insert_bdm PARAMS ((unsigned long, long, const char **));
-static long extract_bdm PARAMS ((unsigned long, int *));
-static unsigned long insert_bdp PARAMS ((unsigned long, long, const char **));
-static long extract_bdp PARAMS ((unsigned long, int *));
-static unsigned long insert_bo PARAMS ((unsigned long, long, const char **));
-static long extract_bo PARAMS ((unsigned long, int *));
-static unsigned long insert_boe PARAMS ((unsigned long, long, const char **));
-static long extract_boe PARAMS ((unsigned long, int *));
-static unsigned long insert_ds PARAMS ((unsigned long, long, const char **));
-static long extract_ds PARAMS ((unsigned long, int *));
-static unsigned long insert_li PARAMS ((unsigned long, long, const char **));
-static long extract_li PARAMS ((unsigned long, int *));
-static unsigned long insert_mbe PARAMS ((unsigned long, long, const char **));
-static long extract_mbe PARAMS ((unsigned long, int *));
-static unsigned long insert_mb6 PARAMS ((unsigned long, long, const char **));
-static long extract_mb6 PARAMS ((unsigned long, int *));
-static unsigned long insert_nb PARAMS ((unsigned long, long, const char **));
-static long extract_nb PARAMS ((unsigned long, int *));
-static unsigned long insert_nsi PARAMS ((unsigned long, long, const char **));
-static long extract_nsi PARAMS ((unsigned long, int *));
-static unsigned long insert_ral PARAMS ((unsigned long, long, const char **));
-static unsigned long insert_ram PARAMS ((unsigned long, long, const char **));
-static unsigned long insert_ras PARAMS ((unsigned long, long, const char **));
-static unsigned long insert_rbs PARAMS ((unsigned long, long, const char **));
-static long extract_rbs PARAMS ((unsigned long, int *));
-static unsigned long insert_sh6 PARAMS ((unsigned long, long, const char **));
-static long extract_sh6 PARAMS ((unsigned long, int *));
-static unsigned long insert_spr PARAMS ((unsigned long, long, const char **));
-static long extract_spr PARAMS ((unsigned long, int *));
-static unsigned long insert_tbr PARAMS ((unsigned long, long, const char **));
-static long extract_tbr PARAMS ((unsigned long, int *));
-
-/* The operands table.
-
-   The fields are bits, shift, signed, insert, extract, flags.  */
-
-const struct powerpc_operand powerpc_operands[] =
-{
-  /* The zero index is used to indicate the end of the list of
-     operands.  */
-#define UNUSED (0)
-  { 0, 0, NULL, NULL, 0 },
-
-  /* The BA field in an XL form instruction.  */
-#define BA (1)
-#define BA_MASK (0x1f << 16)
-  { 5, 16, NULL, NULL, PPC_OPERAND_CR },
-
-  /* The BA field in an XL form instruction when it must be the same
-     as the BT field in the same instruction.  */
-#define BAT (2)
-  { 5, 16, insert_bat, extract_bat, PPC_OPERAND_FAKE },
-
-  /* The BB field in an XL form instruction.  */
-#define BB (3)
-#define BB_MASK (0x1f << 11)
-  { 5, 11, NULL, NULL, PPC_OPERAND_CR },
-
-  /* The BB field in an XL form instruction when it must be the same
-     as the BA field in the same instruction.  */
-#define BBA (4)
-  { 5, 11, insert_bba, extract_bba, PPC_OPERAND_FAKE },
-
-  /* The BD field in a B form instruction.  The lower two bits are
-     forced to zero.  */
-#define BD (5)
-  { 16, 0, insert_bd, extract_bd, PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED },
-
-  /* The BD field in a B form instruction when absolute addressing is
-     used.  */
-#define BDA (6)
-  { 16, 0, insert_bd, extract_bd, PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED },
-
-  /* The BD field in a B form instruction when the - modifier is used.
-     This sets the y bit of the BO field appropriately.  */
-#define BDM (7)
-  { 16, 0, insert_bdm, extract_bdm,
-      PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED },
-
-  /* The BD field in a B form instruction when the - modifier is used
-     and absolute address is used.  */
-#define BDMA (8)
-  { 16, 0, insert_bdm, extract_bdm,
-      PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED },
-
-  /* The BD field in a B form instruction when the + modifier is used.
-     This sets the y bit of the BO field appropriately.  */
-#define BDP (9)
-  { 16, 0, insert_bdp, extract_bdp,
-      PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED },
-
-  /* The BD field in a B form instruction when the + modifier is used
-     and absolute addressing is used.  */
-#define BDPA (10)
-  { 16, 0, insert_bdp, extract_bdp,
-      PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED },
-
-  /* The BF field in an X or XL form instruction.  */
-#define BF (11)
-  { 3, 23, NULL, NULL, PPC_OPERAND_CR },
-
-  /* An optional BF field.  This is used for comparison instructions,
-     in which an omitted BF field is taken as zero.  */
-#define OBF (12)
-  { 3, 23, NULL, NULL, PPC_OPERAND_CR | PPC_OPERAND_OPTIONAL },
-
-  /* The BFA field in an X or XL form instruction.  */
-#define BFA (13)
-  { 3, 18, NULL, NULL, PPC_OPERAND_CR },
-
-  /* The BI field in a B form or XL form instruction.  */
-#define BI (14)
-#define BI_MASK (0x1f << 16)
-  { 5, 16, NULL, NULL, PPC_OPERAND_CR },
-
-  /* The BO field in a B form instruction.  Certain values are
-     illegal.  */
-#define BO (15)
-#define BO_MASK (0x1f << 21)
-  { 5, 21, insert_bo, extract_bo, 0 },
-
-  /* The BO field in a B form instruction when the + or - modifier is
-     used.  This is like the BO field, but it must be even.  */
-#define BOE (16)
-  { 5, 21, insert_boe, extract_boe, 0 },
-
-  /* The BT field in an X or XL form instruction.  */
-#define BT (17)
-  { 5, 21, NULL, NULL, PPC_OPERAND_CR },
-
-  /* The condition register number portion of the BI field in a B form
-     or XL form instruction.  This is used for the extended
-     conditional branch mnemonics, which set the lower two bits of the
-     BI field.  This field is optional.  */
-#define CR (18)
-  { 3, 18, NULL, NULL, PPC_OPERAND_CR | PPC_OPERAND_OPTIONAL },
-
-  /* The D field in a D form instruction.  This is a displacement off
-     a register, and implies that the next operand is a register in
-     parentheses.  */
-#define D (19)
-  { 16, 0, NULL, NULL, PPC_OPERAND_PARENS | PPC_OPERAND_SIGNED },
-
-  /* The DS field in a DS form instruction.  This is like D, but the
-     lower two bits are forced to zero.  */
-#define DS (20)
-  { 16, 0, insert_ds, extract_ds, PPC_OPERAND_PARENS | PPC_OPERAND_SIGNED },
-
-  /* The FL1 field in a POWER SC form instruction.  */
-#define FL1 (21)
-  { 4, 12, NULL, NULL, 0 },
-
-  /* The FL2 field in a POWER SC form instruction.  */
-#define FL2 (22)
-  { 3, 2, NULL, NULL, 0 },
-
-  /* The FLM field in an XFL form instruction.  */
-#define FLM (23)
-  { 8, 17, NULL, NULL, 0 },
-
-  /* The FRA field in an X or A form instruction.  */
-#define FRA (24)
-#define FRA_MASK (0x1f << 16)
-  { 5, 16, NULL, NULL, PPC_OPERAND_FPR },
-
-  /* The FRB field in an X or A form instruction.  */
-#define FRB (25)
-#define FRB_MASK (0x1f << 11)
-  { 5, 11, NULL, NULL, PPC_OPERAND_FPR },
-
-  /* The FRC field in an A form instruction.  */
-#define FRC (26)
-#define FRC_MASK (0x1f << 6)
-  { 5, 6, NULL, NULL, PPC_OPERAND_FPR },
-
-  /* The FRS field in an X form instruction or the FRT field in a D, X
-     or A form instruction.  */
-#define FRS (27)
-#define FRT (FRS)
-  { 5, 21, NULL, NULL, PPC_OPERAND_FPR },
-
-  /* The FXM field in an XFX instruction.  */
-#define FXM (28)
-#define FXM_MASK (0xff << 12)
-  { 8, 12, NULL, NULL, 0 },
-
-  /* The L field in a D or X form instruction.  */
-#define L (29)
-  { 1, 21, NULL, NULL, PPC_OPERAND_OPTIONAL },
-
-  /* The LEV field in a POWER SC form instruction.  */
-#define LEV (30)
-  { 7, 5, NULL, NULL, 0 },
-
-  /* The LI field in an I form instruction.  The lower two bits are
-     forced to zero.  */
-#define LI (31)
-  { 26, 0, insert_li, extract_li, PPC_OPERAND_RELATIVE | PPC_OPERAND_SIGNED },
-
-  /* The LI field in an I form instruction when used as an absolute
-     address.  */
-#define LIA (32)
-  { 26, 0, insert_li, extract_li, PPC_OPERAND_ABSOLUTE | PPC_OPERAND_SIGNED },
-
-  /* The MB field in an M form instruction.  */
-#define MB (33)
-#define MB_MASK (0x1f << 6)
-  { 5, 6, NULL, NULL, 0 },
-
-  /* The ME field in an M form instruction.  */
-#define ME (34)
-#define ME_MASK (0x1f << 1)
-  { 5, 1, NULL, NULL, 0 },
-
-  /* The MB and ME fields in an M form instruction expressed a single
-     operand which is a bitmask indicating which bits to select.  This
-     is a two operand form using PPC_OPERAND_NEXT.  See the
-     description in opcode/ppc.h for what this means.  */
-#define MBE (35)
-  { 5, 6, NULL, NULL, PPC_OPERAND_OPTIONAL | PPC_OPERAND_NEXT },
-  { 32, 0, insert_mbe, extract_mbe, 0 },
-
-  /* The MB or ME field in an MD or MDS form instruction.  The high
-     bit is wrapped to the low end.  */
-#define MB6 (37)
-#define ME6 (MB6)
-#define MB6_MASK (0x3f << 5)
-  { 6, 5, insert_mb6, extract_mb6, 0 },
-
-  /* The NB field in an X form instruction.  The value 32 is stored as
-     0.  */
-#define NB (38)
-  { 6, 11, insert_nb, extract_nb, 0 },
-
-  /* The NSI field in a D form instruction.  This is the same as the
-     SI field, only negated.  */
-#define NSI (39)
-  { 16, 0, insert_nsi, extract_nsi,
-      PPC_OPERAND_NEGATIVE | PPC_OPERAND_SIGNED },
-
-  /* The RA field in an D, DS, X, XO, M, or MDS form instruction.  */
-#define RA (40)
-#define RA_MASK (0x1f << 16)
-  { 5, 16, NULL, NULL, PPC_OPERAND_GPR },
-
-  /* The RA field in a D or X form instruction which is an updating
-     load, which means that the RA field may not be zero and may not
-     equal the RT field.  */
-#define RAL (41)
-  { 5, 16, insert_ral, NULL, PPC_OPERAND_GPR },
-
-  /* The RA field in an lmw instruction, which has special value
-     restrictions.  */
-#define RAM (42)
-  { 5, 16, insert_ram, NULL, PPC_OPERAND_GPR },
-
-  /* The RA field in a D or X form instruction which is an updating
-     store or an updating floating point load, which means that the RA
-     field may not be zero.  */
-#define RAS (43)
-  { 5, 16, insert_ras, NULL, PPC_OPERAND_GPR },
-
-  /* The RB field in an X, XO, M, or MDS form instruction.  */
-#define RB (44)
-#define RB_MASK (0x1f << 11)
-  { 5, 11, NULL, NULL, PPC_OPERAND_GPR },
-
-  /* The RB field in an X form instruction when it must be the same as
-     the RS field in the instruction.  This is used for extended
-     mnemonics like mr.  */
-#define RBS (45)
-  { 5, 1, insert_rbs, extract_rbs, PPC_OPERAND_FAKE },
-
-  /* The RS field in a D, DS, X, XFX, XS, M, MD or MDS form
-     instruction or the RT field in a D, DS, X, XFX or XO form
-     instruction.  */
-#define RS (46)
-#define RT (RS)
-#define RT_MASK (0x1f << 21)
-  { 5, 21, NULL, NULL, PPC_OPERAND_GPR },
-
-  /* The SH field in an X or M form instruction.  */
-#define SH (47)
-#define SH_MASK (0x1f << 11)
-  { 5, 11, NULL, NULL, 0 },
-
-  /* The SH field in an MD form instruction.  This is split.  */
-#define SH6 (48)
-#define SH6_MASK ((0x1f << 11) | (1 << 1))
-  { 6, 1, insert_sh6, extract_sh6, 0 },
-
-  /* The SI field in a D form instruction.  */
-#define SI (49)
-  { 16, 0, NULL, NULL, PPC_OPERAND_SIGNED },
-
-  /* The SI field in a D form instruction when we accept a wide range
-     of positive values.  */
-#define SISIGNOPT (50)
-  { 16, 0, NULL, NULL, PPC_OPERAND_SIGNED | PPC_OPERAND_SIGNOPT },
-
-  /* The SPR field in an XFX form instruction.  This is flipped--the
-     lower 5 bits are stored in the upper 5 and vice- versa.  */
-#define SPR (51)
-#define SPR_MASK (0x3ff << 11)
-  { 10, 11, insert_spr, extract_spr, 0 },
-
-  /* The BAT index number in an XFX form m[ft]ibat[lu] instruction.  */
-#define SPRBAT (52)
-#define SPRBAT_MASK (0x3 << 17)
-  { 2, 17, NULL, NULL, 0 },
-
-  /* The SPRG register number in an XFX form m[ft]sprg instruction.  */
-#define SPRG (53)
-#define SPRG_MASK (0x3 << 16)
-  { 2, 16, NULL, NULL, 0 },
-
-  /* The SR field in an X form instruction.  */
-#define SR (54)
-  { 4, 16, NULL, NULL, 0 },
-
-  /* The SV field in a POWER SC form instruction.  */
-#define SV (55)
-  { 14, 2, NULL, NULL, 0 },
-
-  /* The TBR field in an XFX form instruction.  This is like the SPR
-     field, but it is optional.  */
-#define TBR (56)
-  { 10, 11, insert_tbr, extract_tbr, PPC_OPERAND_OPTIONAL },
-
-  /* The TO field in a D or X form instruction.  */
-#define TO (57)
-#define TO_MASK (0x1f << 21)
-  { 5, 21, NULL, NULL, 0 },
-
-  /* The U field in an X form instruction.  */
-#define U (58)
-  { 4, 12, NULL, NULL, 0 },
-
-  /* The UI field in a D form instruction.  */
-#define UI (59)
-  { 16, 0, NULL, NULL, 0 },
-};
-
-/* The functions used to insert and extract complicated operands.  */
-
-/* The BA field in an XL form instruction when it must be the same as
-   the BT field in the same instruction.  This operand is marked FAKE.
-   The insertion function just copies the BT field into the BA field,
-   and the extraction function just checks that the fields are the
-   same.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_bat(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (((insn >> 21) & 0x1f) << 16);
-}
-
-static long
-extract_bat(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL
-      && ((insn >> 21) & 0x1f) != ((insn >> 16) & 0x1f))
-    *invalid = 1;
-  return 0;
-}
-
-/* The BB field in an XL form instruction when it must be the same as
-   the BA field in the same instruction.  This operand is marked FAKE.
-   The insertion function just copies the BA field into the BB field,
-   and the extraction function just checks that the fields are the
-   same.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_bba(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (((insn >> 16) & 0x1f) << 11);
-}
-
-static long
-extract_bba(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL
-      && ((insn >> 16) & 0x1f) != ((insn >> 11) & 0x1f))
-    *invalid = 1;
-  return 0;
-}
-
-/* The BD field in a B form instruction.  The lower two bits are
-   forced to zero.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_bd(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (value & 0xfffc);
-}
-
-/*ARGSUSED*/
-static long
-extract_bd(unsigned long insn, int *invalid)
-{
-  if ((insn & 0x8000) != 0)
-    return (insn & 0xfffc) - 0x10000;
-  else
-    return insn & 0xfffc;
-}
-
-/* The BD field in a B form instruction when the - modifier is used.
-   This modifier means that the branch is not expected to be taken.
-   We must set the y bit of the BO field to 1 if the offset is
-   negative.  When extracting, we require that the y bit be 1 and that
-   the offset be positive, since if the y bit is 0 we just want to
-   print the normal form of the instruction.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_bdm(unsigned long insn, long value, const char **errmsg)
-{
-  if ((value & 0x8000) != 0)
-    insn |= 1 << 21;
-  return insn | (value & 0xfffc);
-}
-
-static long
-extract_bdm(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL
-      && ((insn & (1 << 21)) == 0
-	  || (insn & (1 << 15)) == 0))
-    *invalid = 1;
-  if ((insn & 0x8000) != 0)
-    return (insn & 0xfffc) - 0x10000;
-  else
-    return insn & 0xfffc;
-}
-
-/* The BD field in a B form instruction when the + modifier is used.
-   This is like BDM, above, except that the branch is expected to be
-   taken.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_bdp(unsigned long insn, long value, const char **errmsg)
-{
-  if ((value & 0x8000) == 0)
-    insn |= 1 << 21;
-  return insn | (value & 0xfffc);
-}
-
-static long
-extract_bdp(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL
-      && ((insn & (1 << 21)) == 0
-	  || (insn & (1 << 15)) != 0))
-    *invalid = 1;
-  if ((insn & 0x8000) != 0)
-    return (insn & 0xfffc) - 0x10000;
-  else
-    return insn & 0xfffc;
-}
-
-/* Check for legal values of a BO field.  */
-
-static int
-valid_bo (long value)
-{
-  /* Certain encodings have bits that are required to be zero.  These
-     are (z must be zero, y may be anything):
-         001zy
-	 011zy
-	 1z00y
-	 1z01y
-	 1z1zz
-     */
-  switch (value & 0x14)
-    {
-    default:
-    case 0:
-      return 1;
-    case 0x4:
-      return (value & 0x2) == 0;
-    case 0x10:
-      return (value & 0x8) == 0;
-    case 0x14:
-      return value == 0x14;
-    }
-}
-
-/* The BO field in a B form instruction.  Warn about attempts to set
-   the field to an illegal value.  */
-
-static unsigned long
-insert_bo(unsigned long insn, long value, const char **errmsg)
-{
-  if (errmsg != (const char **) NULL
-      && ! valid_bo (value))
-    *errmsg = "invalid conditional option";
-  return insn | ((value & 0x1f) << 21);
-}
-
-static long
-extract_bo(unsigned long insn, int *invalid)
-{
-  long value;
-
-  value = (insn >> 21) & 0x1f;
-  if (invalid != (int *) NULL
-      && ! valid_bo (value))
-    *invalid = 1;
-  return value;
-}
-
-/* The BO field in a B form instruction when the + or - modifier is
-   used.  This is like the BO field, but it must be even.  When
-   extracting it, we force it to be even.  */
-
-static unsigned long
-insert_boe(unsigned long insn, long value, const char **errmsg)
-{
-  if (errmsg != (const char **) NULL)
-    {
-      if (! valid_bo (value))
-	*errmsg = "invalid conditional option";
-      else if ((value & 1) != 0)
-	*errmsg = "attempt to set y bit when using + or - modifier";
-    }
-  return insn | ((value & 0x1f) << 21);
-}
-
-static long
-extract_boe(unsigned long insn, int *invalid)
-{
-  long value;
-
-  value = (insn >> 21) & 0x1f;
-  if (invalid != (int *) NULL
-      && ! valid_bo (value))
-    *invalid = 1;
-  return value & 0x1e;
-}
-
-/* The DS field in a DS form instruction.  This is like D, but the
-   lower two bits are forced to zero.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_ds(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (value & 0xfffc);
-}
-
-/*ARGSUSED*/
-static long
-extract_ds(unsigned long insn, int *invalid)
-{
-  if ((insn & 0x8000) != 0)
-    return (insn & 0xfffc) - 0x10000;
-  else
-    return insn & 0xfffc;
-}
-
-/* The LI field in an I form instruction.  The lower two bits are
-   forced to zero.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_li(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (value & 0x3fffffc);
-}
-
-/*ARGSUSED*/
-static long
-extract_li(unsigned long insn, int *invalid)
-{
-  if ((insn & 0x2000000) != 0)
-    return (insn & 0x3fffffc) - 0x4000000;
-  else
-    return insn & 0x3fffffc;
-}
-
-/* The MB and ME fields in an M form instruction expressed as a single
-   operand which is itself a bitmask.  The extraction function always
-   marks it as invalid, since we never want to recognize an
-   instruction which uses a field of this type.  */
-
-static unsigned long
-insert_mbe(unsigned long insn, long value, const char **errmsg)
-{
-  unsigned long uval;
-  int mb, me;
-
-  uval = value;
-
-  if (uval == 0)
-    {
-      if (errmsg != (const char **) NULL)
-	*errmsg = "illegal bitmask";
-      return insn;
-    }
-
-  me = 31;
-  while ((uval & 1) == 0)
-    {
-      uval >>= 1;
-      --me;
-    }
-
-  mb = me;
-  uval >>= 1;
-  while ((uval & 1) != 0)
-    {
-      uval >>= 1;
-      --mb;
-    }
-
-  if (uval != 0)
-    {
-      if (errmsg != (const char **) NULL)
-	*errmsg = "illegal bitmask";
-    }
-
-  return insn | (mb << 6) | (me << 1);
-}
-
-static long
-extract_mbe(unsigned long insn, int *invalid)
-{
-  long ret;
-  int mb, me;
-  int i;
-
-  if (invalid != (int *) NULL)
-    *invalid = 1;
-
-  ret = 0;
-  mb = (insn >> 6) & 0x1f;
-  me = (insn >> 1) & 0x1f;
-  for (i = mb; i < me; i++)
-    ret |= 1 << (31 - i);
-  return ret;
-}
-
-/* The MB or ME field in an MD or MDS form instruction.  The high bit
-   is wrapped to the low end.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_mb6(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | ((value & 0x1f) << 6) | (value & 0x20);
-}
-
-/*ARGSUSED*/
-static long
-extract_mb6(unsigned long insn, int *invalid)
-{
-  return ((insn >> 6) & 0x1f) | (insn & 0x20);
-}
-
-/* The NB field in an X form instruction.  The value 32 is stored as
-   0.  */
-
-static unsigned long
-insert_nb(unsigned long insn, long value, const char **errmsg)
-{
-  if (value < 0 || value > 32)
-    *errmsg = "value out of range";
-  if (value == 32)
-    value = 0;
-  return insn | ((value & 0x1f) << 11);
-}
-
-/*ARGSUSED*/
-static long
-extract_nb(unsigned long insn, int *invalid)
-{
-  long ret;
-
-  ret = (insn >> 11) & 0x1f;
-  if (ret == 0)
-    ret = 32;
-  return ret;
-}
-
-/* The NSI field in a D form instruction.  This is the same as the SI
-   field, only negated.  The extraction function always marks it as
-   invalid, since we never want to recognize an instruction which uses
-   a field of this type.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_nsi(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | ((- value) & 0xffff);
-}
-
-static long
-extract_nsi(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL)
-    *invalid = 1;
-  if ((insn & 0x8000) != 0)
-    return - ((insn & 0xffff) - 0x10000);
-  else
-    return - (insn & 0xffff);
-}
-
-/* The RA field in a D or X form instruction which is an updating
-   load, which means that the RA field may not be zero and may not
-   equal the RT field.  */
-
-static unsigned long
-insert_ral(unsigned long insn, long value, const char **errmsg)
-{
-  if (value == 0
-      || value == ((insn >> 21) & 0x1f))
-    *errmsg = "invalid register operand when updating";
-  return insn | ((value & 0x1f) << 16);
-}
-
-/* The RA field in an lmw instruction, which has special value
-   restrictions.  */
-
-static unsigned long
-insert_ram(unsigned long insn, long value, const char **errmsg)
-{
-  if (value >= ((insn >> 21) & 0x1f))
-    *errmsg = "index register in load range";
-  return insn | ((value & 0x1f) << 16);
-}
-
-/* The RA field in a D or X form instruction which is an updating
-   store or an updating floating point load, which means that the RA
-   field may not be zero.  */
-
-static unsigned long
-insert_ras(unsigned long insn, long value, const char **errmsg)
-{
-  if (value == 0)
-    *errmsg = "invalid register operand when updating";
-  return insn | ((value & 0x1f) << 16);
-}
-
-/* The RB field in an X form instruction when it must be the same as
-   the RS field in the instruction.  This is used for extended
-   mnemonics like mr.  This operand is marked FAKE.  The insertion
-   function just copies the BT field into the BA field, and the
-   extraction function just checks that the fields are the same.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_rbs(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | (((insn >> 21) & 0x1f) << 11);
-}
-
-static long
-extract_rbs(unsigned long insn, int *invalid)
-{
-  if (invalid != (int *) NULL
-      && ((insn >> 21) & 0x1f) != ((insn >> 11) & 0x1f))
-    *invalid = 1;
-  return 0;
-}
-
-/* The SH field in an MD form instruction.  This is split.  */
-
-/*ARGSUSED*/
-static unsigned long
-insert_sh6(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | ((value & 0x1f) << 11) | ((value & 0x20) >> 4);
-}
-
-/*ARGSUSED*/
-static long
-extract_sh6(unsigned long insn, int *invalid)
-{
-  return ((insn >> 11) & 0x1f) | ((insn << 4) & 0x20);
-}
-
-/* The SPR field in an XFX form instruction.  This is flipped--the
-   lower 5 bits are stored in the upper 5 and vice- versa.  */
-
-static unsigned long
-insert_spr(unsigned long insn, long value, const char **errmsg)
-{
-  return insn | ((value & 0x1f) << 16) | ((value & 0x3e0) << 6);
-}
-
-static long
-extract_spr(unsigned long insn, int *invalid)
-{
-  return ((insn >> 16) & 0x1f) | ((insn >> 6) & 0x3e0);
-}
-
-/* The TBR field in an XFX instruction.  This is just like SPR, but it
-   is optional.  When TBR is omitted, it must be inserted as 268 (the
-   magic number of the TB register).  These functions treat 0
-   (indicating an omitted optional operand) as 268.  This means that
-   ``mftb 4,0'' is not handled correctly.  This does not matter very
-   much, since the architecture manual does not define mftb as
-   accepting any values other than 268 or 269.  */
-
-#define TB (268)
-
-static unsigned long
-insert_tbr(unsigned long insn, long value, const char **errmsg)
-{
-  if (value == 0)
-    value = TB;
-  return insn | ((value & 0x1f) << 16) | ((value & 0x3e0) << 6);
-}
-
-static long
-extract_tbr(unsigned long insn, int *invalid)
-{
-  long ret;
-
-  ret = ((insn >> 16) & 0x1f) | ((insn >> 6) & 0x3e0);
-  if (ret == TB)
-    ret = 0;
-  return ret;
-}
-
-/* Macros used to form opcodes.  */
-
-/* The main opcode.  */
-#define OP(x) (((x) & 0x3f) << 26)
-#define OP_MASK OP (0x3f)
-
-/* The main opcode combined with a trap code in the TO field of a D
-   form instruction.  Used for extended mnemonics for the trap
-   instructions.  */
-#define OPTO(x,to) (OP (x) | (((to) & 0x1f) << 21))
-#define OPTO_MASK (OP_MASK | TO_MASK)
-
-/* The main opcode combined with a comparison size bit in the L field
-   of a D form or X form instruction.  Used for extended mnemonics for
-   the comparison instructions.  */
-#define OPL(x,l) (OP (x) | (((l) & 1) << 21))
-#define OPL_MASK OPL (0x3f,1)
-
-/* An A form instruction.  */
-#define A(op, xop, rc) (OP (op) | (((xop) & 0x1f) << 1) | ((rc) & 1))
-#define A_MASK A (0x3f, 0x1f, 1)
-
-/* An A_MASK with the FRB field fixed.  */
-#define AFRB_MASK (A_MASK | FRB_MASK)
-
-/* An A_MASK with the FRC field fixed.  */
-#define AFRC_MASK (A_MASK | FRC_MASK)
-
-/* An A_MASK with the FRA and FRC fields fixed.  */
-#define AFRAFRC_MASK (A_MASK | FRA_MASK | FRC_MASK)
-
-/* A B form instruction.  */
-#define B(op, aa, lk) (OP (op) | (((aa) & 1) << 1) | ((lk) & 1))
-#define B_MASK B (0x3f, 1, 1)
-
-/* A B form instruction setting the BO field.  */
-#define BBO(op, bo, aa, lk) (B ((op), (aa), (lk)) | (((bo) & 0x1f) << 21))
-#define BBO_MASK BBO (0x3f, 0x1f, 1, 1)
-
-/* A BBO_MASK with the y bit of the BO field removed.  This permits
-   matching a conditional branch regardless of the setting of the y
-   bit.  */
-#define Y_MASK (1 << 21)
-#define BBOY_MASK (BBO_MASK &~ Y_MASK)
-
-/* A B form instruction setting the BO field and the condition bits of
-   the BI field.  */
-#define BBOCB(op, bo, cb, aa, lk) \
-  (BBO ((op), (bo), (aa), (lk)) | (((cb) & 0x3) << 16))
-#define BBOCB_MASK BBOCB (0x3f, 0x1f, 0x3, 1, 1)
-
-/* A BBOCB_MASK with the y bit of the BO field removed.  */
-#define BBOYCB_MASK (BBOCB_MASK &~ Y_MASK)
-
-/* A BBOYCB_MASK in which the BI field is fixed.  */
-#define BBOYBI_MASK (BBOYCB_MASK | BI_MASK)
-
-/* The main opcode mask with the RA field clear.  */
-#define DRA_MASK (OP_MASK | RA_MASK)
-
-/* A DS form instruction.  */
-#define DSO(op, xop) (OP (op) | ((xop) & 0x3))
-#define DS_MASK DSO (0x3f, 3)
-
-/* An M form instruction.  */
-#define M(op, rc) (OP (op) | ((rc) & 1))
-#define M_MASK M (0x3f, 1)
-
-/* An M form instruction with the ME field specified.  */
-#define MME(op, me, rc) (M ((op), (rc)) | (((me) & 0x1f) << 1))
-
-/* An M_MASK with the MB and ME fields fixed.  */
-#define MMBME_MASK (M_MASK | MB_MASK | ME_MASK)
-
-/* An M_MASK with the SH and ME fields fixed.  */
-#define MSHME_MASK (M_MASK | SH_MASK | ME_MASK)
-
-/* An MD form instruction.  */
-#define MD(op, xop, rc) (OP (op) | (((xop) & 0x7) << 2) | ((rc) & 1))
-#define MD_MASK MD (0x3f, 0x7, 1)
-
-/* An MD_MASK with the MB field fixed.  */
-#define MDMB_MASK (MD_MASK | MB6_MASK)
-
-/* An MD_MASK with the SH field fixed.  */
-#define MDSH_MASK (MD_MASK | SH6_MASK)
-
-/* An MDS form instruction.  */
-#define MDS(op, xop, rc) (OP (op) | (((xop) & 0xf) << 1) | ((rc) & 1))
-#define MDS_MASK MDS (0x3f, 0xf, 1)
-
-/* An MDS_MASK with the MB field fixed.  */
-#define MDSMB_MASK (MDS_MASK | MB6_MASK)
-
-/* An SC form instruction.  */
-#define SC(op, sa, lk) (OP (op) | (((sa) & 1) << 1) | ((lk) & 1))
-#define SC_MASK (OP_MASK | (0x3ff << 16) | (1 << 1) | 1)
-
-/* An X form instruction.  */
-#define X(op, xop) (OP (op) | (((xop) & 0x3ff) << 1))
-
-/* An X form instruction with the RC bit specified.  */
-#define XRC(op, xop, rc) (X ((op), (xop)) | ((rc) & 1))
-
-/* The mask for an X form instruction.  */
-#define X_MASK XRC (0x3f, 0x3ff, 1)
-
-/* An X_MASK with the RA field fixed.  */
-#define XRA_MASK (X_MASK | RA_MASK)
-
-/* An X_MASK with the RB field fixed.  */
-#define XRB_MASK (X_MASK | RB_MASK)
-
-/* An X_MASK with the RT field fixed.  */
-#define XRT_MASK (X_MASK | RT_MASK)
-
-/* An X_MASK with the RA and RB fields fixed.  */
-#define XRARB_MASK (X_MASK | RA_MASK | RB_MASK)
-
-/* An X_MASK with the RT and RA fields fixed.  */
-#define XRTRA_MASK (X_MASK | RT_MASK | RA_MASK)
-
-/* An X form comparison instruction.  */
-#define XCMPL(op, xop, l) (X ((op), (xop)) | (((l) & 1) << 21))
-
-/* The mask for an X form comparison instruction.  */
-#define XCMP_MASK (X_MASK | (1 << 22))
-
-/* The mask for an X form comparison instruction with the L field
-   fixed.  */
-#define XCMPL_MASK (XCMP_MASK | (1 << 21))
-
-/* An X form trap instruction with the TO field specified.  */
-#define XTO(op, xop, to) (X ((op), (xop)) | (((to) & 0x1f) << 21))
-#define XTO_MASK (X_MASK | TO_MASK)
-
-/* An XFL form instruction.  */
-#define XFL(op, xop, rc) (OP (op) | (((xop) & 0x3ff) << 1) | ((rc) & 1))
-#define XFL_MASK (XFL (0x3f, 0x3ff, 1) | (1 << 25) | (1 << 16))
-
-/* An XL form instruction with the LK field set to 0.  */
-#define XL(op, xop) (OP (op) | (((xop) & 0x3ff) << 1))
-
-/* An XL form instruction which uses the LK field.  */
-#define XLLK(op, xop, lk) (XL ((op), (xop)) | ((lk) & 1))
-
-/* The mask for an XL form instruction.  */
-#define XL_MASK XLLK (0x3f, 0x3ff, 1)
-
-/* An XL form instruction which explicitly sets the BO field.  */
-#define XLO(op, bo, xop, lk) \
-  (XLLK ((op), (xop), (lk)) | (((bo) & 0x1f) << 21))
-#define XLO_MASK (XL_MASK | BO_MASK)
-
-/* An XL form instruction which explicitly sets the y bit of the BO
-   field.  */
-#define XLYLK(op, xop, y, lk) (XLLK ((op), (xop), (lk)) | (((y) & 1) << 21))
-#define XLYLK_MASK (XL_MASK | Y_MASK)
-
-/* An XL form instruction which sets the BO field and the condition
-   bits of the BI field.  */
-#define XLOCB(op, bo, cb, xop, lk) \
-  (XLO ((op), (bo), (xop), (lk)) | (((cb) & 3) << 16))
-#define XLOCB_MASK XLOCB (0x3f, 0x1f, 0x3, 0x3ff, 1)
-
-/* An XL_MASK or XLYLK_MASK or XLOCB_MASK with the BB field fixed.  */
-#define XLBB_MASK (XL_MASK | BB_MASK)
-#define XLYBB_MASK (XLYLK_MASK | BB_MASK)
-#define XLBOCBBB_MASK (XLOCB_MASK | BB_MASK)
-
-/* An XL_MASK with the BO and BB fields fixed.  */
-#define XLBOBB_MASK (XL_MASK | BO_MASK | BB_MASK)
-
-/* An XL_MASK with the BO, BI and BB fields fixed.  */
-#define XLBOBIBB_MASK (XL_MASK | BO_MASK | BI_MASK | BB_MASK)
-
-/* An XO form instruction.  */
-#define XO(op, xop, oe, rc) \
-  (OP (op) | (((xop) & 0x1ff) << 1) | (((oe) & 1) << 10) | ((rc) & 1))
-#define XO_MASK XO (0x3f, 0x1ff, 1, 1)
-
-/* An XO_MASK with the RB field fixed.  */
-#define XORB_MASK (XO_MASK | RB_MASK)
-
-/* An XS form instruction.  */
-#define XS(op, xop, rc) (OP (op) | (((xop) & 0x1ff) << 2) | ((rc) & 1))
-#define XS_MASK XS (0x3f, 0x1ff, 1)
-
-/* A mask for the FXM version of an XFX form instruction.  */
-#define XFXFXM_MASK (X_MASK | (1 << 20) | (1 << 11))
-
-/* An XFX form instruction with the FXM field filled in.  */
-#define XFXM(op, xop, fxm) \
-  (X ((op), (xop)) | (((fxm) & 0xff) << 12))
-
-/* An XFX form instruction with the SPR field filled in.  */
-#define XSPR(op, xop, spr) \
-  (X ((op), (xop)) | (((spr) & 0x1f) << 16) | (((spr) & 0x3e0) << 6))
-#define XSPR_MASK (X_MASK | SPR_MASK)
-
-/* An XFX form instruction with the SPR field filled in except for the
-   SPRBAT field.  */
-#define XSPRBAT_MASK (XSPR_MASK &~ SPRBAT_MASK)
-
-/* An XFX form instruction with the SPR field filled in except for the
-   SPRG field.  */
-#define XSPRG_MASK (XSPR_MASK &~ SPRG_MASK)
-
-/* The BO encodings used in extended conditional branch mnemonics.  */
-#define BODNZF	(0x0)
-#define BODNZFP	(0x1)
-#define BODZF	(0x2)
-#define BODZFP	(0x3)
-#define BOF	(0x4)
-#define BOFP	(0x5)
-#define BODNZT	(0x8)
-#define BODNZTP	(0x9)
-#define BODZT	(0xa)
-#define BODZTP	(0xb)
-#define BOT	(0xc)
-#define BOTP	(0xd)
-#define BODNZ	(0x10)
-#define BODNZP	(0x11)
-#define BODZ	(0x12)
-#define BODZP	(0x13)
-#define BOU	(0x14)
-
-/* The BI condition bit encodings used in extended conditional branch
-   mnemonics.  */
-#define CBLT	(0)
-#define CBGT	(1)
-#define CBEQ	(2)
-#define CBSO	(3)
-
-/* The TO encodings used in extended trap mnemonics.  */
-#define TOLGT	(0x1)
-#define TOLLT	(0x2)
-#define TOEQ	(0x4)
-#define TOLGE	(0x5)
-#define TOLNL	(0x5)
-#define TOLLE	(0x6)
-#define TOLNG	(0x6)
-#define TOGT	(0x8)
-#define TOGE	(0xc)
-#define TONL	(0xc)
-#define TOLT	(0x10)
-#define TOLE	(0x14)
-#define TONG	(0x14)
-#define TONE	(0x18)
-#define TOU	(0x1f)
-
-/* Smaller names for the flags so each entry in the opcodes table will
-   fit on a single line.  */
-#undef PPC
-#define PPC PPC_OPCODE_PPC
-#define POWER PPC_OPCODE_POWER
-#define POWER2 PPC_OPCODE_POWER2
-#define B32 PPC_OPCODE_32
-#define B64 PPC_OPCODE_64
-#define M601 PPC_OPCODE_601
-
-/* The opcode table.
-
-   The format of the opcode table is:
-
-   NAME	     OPCODE	MASK		FLAGS		{ OPERANDS }
-
-   NAME is the name of the instruction.
-   OPCODE is the instruction opcode.
-   MASK is the opcode mask; this is used to tell the disassembler
-     which bits in the actual opcode must match OPCODE.
-   FLAGS are flags indicated what processors support the instruction.
-   OPERANDS is the list of operands.
-
-   The disassembler reads the table in order and prints the first
-   instruction which matches, so this table is sorted to put more
-   specific instructions before more general instructions.  It is also
-   sorted by major opcode.  */
-
-const struct powerpc_opcode powerpc_opcodes[] = {
-{ "tdlgti",  OPTO(2,TOLGT), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdllti",  OPTO(2,TOLLT), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdeqi",   OPTO(2,TOEQ), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdlgei",  OPTO(2,TOLGE), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdlnli",  OPTO(2,TOLNL), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdllei",  OPTO(2,TOLLE), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdlngi",  OPTO(2,TOLNG), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdgti",   OPTO(2,TOGT), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdgei",   OPTO(2,TOGE), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdnli",   OPTO(2,TONL), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdlti",   OPTO(2,TOLT), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdlei",   OPTO(2,TOLE), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdngi",   OPTO(2,TONG), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdnei",   OPTO(2,TONE), OPTO_MASK,	PPC|B64,	{ RA, SI } },
-{ "tdi",     OP(2),	OP_MASK,	PPC|B64,	{ TO, RA, SI } },
-
-{ "twlgti",  OPTO(3,TOLGT), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlgti",   OPTO(3,TOLGT), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twllti",  OPTO(3,TOLLT), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tllti",   OPTO(3,TOLLT), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "tweqi",   OPTO(3,TOEQ), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "teqi",    OPTO(3,TOEQ), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twlgei",  OPTO(3,TOLGE), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlgei",   OPTO(3,TOLGE), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twlnli",  OPTO(3,TOLNL), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlnli",   OPTO(3,TOLNL), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twllei",  OPTO(3,TOLLE), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tllei",   OPTO(3,TOLLE), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twlngi",  OPTO(3,TOLNG), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlngi",   OPTO(3,TOLNG), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twgti",   OPTO(3,TOGT), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tgti",    OPTO(3,TOGT), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twgei",   OPTO(3,TOGE), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tgei",    OPTO(3,TOGE), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twnli",   OPTO(3,TONL), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tnli",    OPTO(3,TONL), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twlti",   OPTO(3,TOLT), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlti",    OPTO(3,TOLT), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twlei",   OPTO(3,TOLE), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tlei",    OPTO(3,TOLE), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twngi",   OPTO(3,TONG), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tngi",    OPTO(3,TONG), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twnei",   OPTO(3,TONE), OPTO_MASK,	PPC,		{ RA, SI } },
-{ "tnei",    OPTO(3,TONE), OPTO_MASK,	POWER,		{ RA, SI } },
-{ "twi",     OP(3),	OP_MASK,	PPC,		{ TO, RA, SI } },
-{ "ti",      OP(3),	OP_MASK,	POWER,		{ TO, RA, SI } },
-
-{ "mulli",   OP(7),	OP_MASK,	PPC,		{ RT, RA, SI } },
-{ "muli",    OP(7),	OP_MASK,	POWER,		{ RT, RA, SI } },
-
-{ "subfic",  OP(8),	OP_MASK,	PPC,		{ RT, RA, SI } },
-{ "sfi",     OP(8),	OP_MASK,	POWER,		{ RT, RA, SI } },
-
-{ "dozi",    OP(9),	OP_MASK,	POWER|M601,	{ RT, RA, SI } },
-
-{ "cmplwi",  OPL(10,0),	OPL_MASK,	PPC,		{ OBF, RA, UI } },
-{ "cmpldi",  OPL(10,1), OPL_MASK,	PPC|B64,	{ OBF, RA, UI } },
-{ "cmpli",   OP(10),	OP_MASK,	PPC,		{ BF, L, RA, UI } },
-{ "cmpli",   OP(10),	OP_MASK,	POWER,		{ BF, RA, UI } },
-
-{ "cmpwi",   OPL(11,0),	OPL_MASK,	PPC,		{ OBF, RA, SI } },
-{ "cmpdi",   OPL(11,1),	OPL_MASK,	PPC|B64,	{ OBF, RA, SI } },
-{ "cmpi",    OP(11),	OP_MASK,	PPC,		{ BF, L, RA, SI } },
-{ "cmpi",    OP(11),	OP_MASK,	POWER,		{ BF, RA, SI } },
-
-{ "addic",   OP(12),	OP_MASK,	PPC,		{ RT, RA, SI } },
-{ "ai",	     OP(12),	OP_MASK,	POWER,		{ RT, RA, SI } },
-{ "subic",   OP(12),	OP_MASK,	PPC,		{ RT, RA, NSI } },
-
-{ "addic.",  OP(13),	OP_MASK,	PPC,		{ RT, RA, SI } },
-{ "ai.",     OP(13),	OP_MASK,	POWER,		{ RT, RA, SI } },
-{ "subic.",  OP(13),	OP_MASK,	PPC,		{ RT, RA, NSI } },
-
-{ "li",	     OP(14),	DRA_MASK,	PPC,		{ RT, SI } },
-{ "lil",     OP(14),	DRA_MASK,	POWER,		{ RT, SI } },
-{ "addi",    OP(14),	OP_MASK,	PPC,		{ RT, RA, SI } },
-{ "cal",     OP(14),	OP_MASK,	POWER,		{ RT, D, RA } },
-{ "subi",    OP(14),	OP_MASK,	PPC,		{ RT, RA, NSI } },
-{ "la",	     OP(14),	OP_MASK,	PPC,		{ RT, D, RA } },
-
-{ "lis",     OP(15),	DRA_MASK,	PPC,		{ RT, SISIGNOPT } },
-{ "liu",     OP(15),	DRA_MASK,	POWER,		{ RT, SISIGNOPT } },
-{ "addis",   OP(15),	OP_MASK,	PPC,		{ RT,RA,SISIGNOPT } },
-{ "cau",     OP(15),	OP_MASK,	POWER,		{ RT,RA,SISIGNOPT } },
-{ "subis",   OP(15),	OP_MASK,	PPC,		{ RT, RA, NSI } },
-
-{ "bdnz-",   BBO(16,BODNZ,0,0), BBOYBI_MASK, PPC,	{ BDM } },
-{ "bdnz+",   BBO(16,BODNZ,0,0), BBOYBI_MASK, PPC,	{ BDP } },
-{ "bdnz",    BBO(16,BODNZ,0,0), BBOYBI_MASK, PPC,	{ BD } },
-{ "bdn",     BBO(16,BODNZ,0,0), BBOYBI_MASK, POWER,	{ BD } },
-{ "bdnzl-",  BBO(16,BODNZ,0,1), BBOYBI_MASK, PPC,	{ BDM } },
-{ "bdnzl+",  BBO(16,BODNZ,0,1), BBOYBI_MASK, PPC,	{ BDP } },
-{ "bdnzl",   BBO(16,BODNZ,0,1), BBOYBI_MASK, PPC,	{ BD } },
-{ "bdnl",    BBO(16,BODNZ,0,1), BBOYBI_MASK, POWER,	{ BD } },
-{ "bdnza-",  BBO(16,BODNZ,1,0), BBOYBI_MASK, PPC,	{ BDMA } },
-{ "bdnza+",  BBO(16,BODNZ,1,0), BBOYBI_MASK, PPC,	{ BDPA } },
-{ "bdnza",   BBO(16,BODNZ,1,0), BBOYBI_MASK, PPC,	{ BDA } },
-{ "bdna",    BBO(16,BODNZ,1,0), BBOYBI_MASK, POWER,	{ BDA } },
-{ "bdnzla-", BBO(16,BODNZ,1,1), BBOYBI_MASK, PPC,	{ BDMA } },
-{ "bdnzla+", BBO(16,BODNZ,1,1), BBOYBI_MASK, PPC,	{ BDPA } },
-{ "bdnzla",  BBO(16,BODNZ,1,1), BBOYBI_MASK, PPC,	{ BDA } },
-{ "bdnla",   BBO(16,BODNZ,1,1), BBOYBI_MASK, POWER,	{ BDA } },
-{ "bdz-",    BBO(16,BODZ,0,0), BBOYBI_MASK, PPC,	{ BDM } },
-{ "bdz+",    BBO(16,BODZ,0,0), BBOYBI_MASK, PPC,	{ BDP } },
-{ "bdz",     BBO(16,BODZ,0,0), BBOYBI_MASK, PPC|POWER,	{ BD } },
-{ "bdzl-",   BBO(16,BODZ,0,1), BBOYBI_MASK, PPC,	{ BDM } },
-{ "bdzl+",   BBO(16,BODZ,0,1), BBOYBI_MASK, PPC,	{ BDP } },
-{ "bdzl",    BBO(16,BODZ,0,1), BBOYBI_MASK, PPC|POWER,	{ BD } },
-{ "bdza-",   BBO(16,BODZ,1,0), BBOYBI_MASK, PPC,	{ BDMA } },
-{ "bdza+",   BBO(16,BODZ,1,0), BBOYBI_MASK, PPC,	{ BDPA } },
-{ "bdza",    BBO(16,BODZ,1,0), BBOYBI_MASK, PPC|POWER,	{ BDA } },
-{ "bdzla-",  BBO(16,BODZ,1,1), BBOYBI_MASK, PPC,	{ BDMA } },
-{ "bdzla+",  BBO(16,BODZ,1,1), BBOYBI_MASK, PPC,	{ BDPA } },
-{ "bdzla",   BBO(16,BODZ,1,1), BBOYBI_MASK, PPC|POWER,	{ BDA } },
-{ "blt-",    BBOCB(16,BOT,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "blt+",    BBOCB(16,BOT,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "blt",     BBOCB(16,BOT,CBLT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bltl-",   BBOCB(16,BOT,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bltl+",   BBOCB(16,BOT,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bltl",    BBOCB(16,BOT,CBLT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "blta-",   BBOCB(16,BOT,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "blta+",   BBOCB(16,BOT,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "blta",    BBOCB(16,BOT,CBLT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bltla-",  BBOCB(16,BOT,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bltla+",  BBOCB(16,BOT,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bltla",   BBOCB(16,BOT,CBLT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bgt-",    BBOCB(16,BOT,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bgt+",    BBOCB(16,BOT,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bgt",     BBOCB(16,BOT,CBGT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bgtl-",   BBOCB(16,BOT,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bgtl+",   BBOCB(16,BOT,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bgtl",    BBOCB(16,BOT,CBGT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bgta-",   BBOCB(16,BOT,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bgta+",   BBOCB(16,BOT,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bgta",    BBOCB(16,BOT,CBGT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bgtla-",  BBOCB(16,BOT,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bgtla+",  BBOCB(16,BOT,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bgtla",   BBOCB(16,BOT,CBGT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "beq-",    BBOCB(16,BOT,CBEQ,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "beq+",    BBOCB(16,BOT,CBEQ,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "beq",     BBOCB(16,BOT,CBEQ,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "beql-",   BBOCB(16,BOT,CBEQ,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "beql+",   BBOCB(16,BOT,CBEQ,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "beql",    BBOCB(16,BOT,CBEQ,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "beqa-",   BBOCB(16,BOT,CBEQ,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "beqa+",   BBOCB(16,BOT,CBEQ,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "beqa",    BBOCB(16,BOT,CBEQ,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "beqla-",  BBOCB(16,BOT,CBEQ,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "beqla+",  BBOCB(16,BOT,CBEQ,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "beqla",   BBOCB(16,BOT,CBEQ,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bso-",    BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bso+",    BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bso",     BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bsol-",   BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bsol+",   BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bsol",    BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bsoa-",   BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bsoa+",   BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bsoa",    BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bsola-",  BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bsola+",  BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bsola",   BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bun-",    BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bun+",    BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bun",     BBOCB(16,BOT,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BD } },
-{ "bunl-",   BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bunl+",   BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bunl",    BBOCB(16,BOT,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BD } },
-{ "buna-",   BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "buna+",   BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "buna",    BBOCB(16,BOT,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDA } },
-{ "bunla-",  BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bunla+",  BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bunla",   BBOCB(16,BOT,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDA } },
-{ "bge-",    BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bge+",    BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bge",     BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bgel-",   BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bgel+",   BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bgel",    BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bgea-",   BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bgea+",   BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bgea",    BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bgela-",  BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bgela+",  BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bgela",   BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bnl-",    BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnl+",    BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnl",     BBOCB(16,BOF,CBLT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnll-",   BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnll+",   BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnll",    BBOCB(16,BOF,CBLT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnla-",   BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnla+",   BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnla",    BBOCB(16,BOF,CBLT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bnlla-",  BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnlla+",  BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnlla",   BBOCB(16,BOF,CBLT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "ble-",    BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "ble+",    BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "ble",     BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "blel-",   BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "blel+",   BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "blel",    BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "blea-",   BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "blea+",   BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "blea",    BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "blela-",  BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "blela+",  BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "blela",   BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bng-",    BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bng+",    BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bng",     BBOCB(16,BOF,CBGT,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bngl-",   BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bngl+",   BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bngl",    BBOCB(16,BOF,CBGT,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnga-",   BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnga+",   BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnga",    BBOCB(16,BOF,CBGT,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bngla-",  BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bngla+",  BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bngla",   BBOCB(16,BOF,CBGT,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bne-",    BBOCB(16,BOF,CBEQ,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bne+",    BBOCB(16,BOF,CBEQ,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bne",     BBOCB(16,BOF,CBEQ,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnel-",   BBOCB(16,BOF,CBEQ,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnel+",   BBOCB(16,BOF,CBEQ,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnel",    BBOCB(16,BOF,CBEQ,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnea-",   BBOCB(16,BOF,CBEQ,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnea+",   BBOCB(16,BOF,CBEQ,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnea",    BBOCB(16,BOF,CBEQ,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bnela-",  BBOCB(16,BOF,CBEQ,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnela+",  BBOCB(16,BOF,CBEQ,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnela",   BBOCB(16,BOF,CBEQ,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bns-",    BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bns+",    BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bns",     BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnsl-",   BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnsl+",   BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnsl",    BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC|POWER, { CR, BD } },
-{ "bnsa-",   BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnsa+",   BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnsa",    BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bnsla-",  BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnsla+",  BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnsla",   BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC|POWER, { CR, BDA } },
-{ "bnu-",    BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnu+",    BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnu",     BBOCB(16,BOF,CBSO,0,0), BBOYCB_MASK, PPC,	{ CR, BD } },
-{ "bnul-",   BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDM } },
-{ "bnul+",   BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BDP } },
-{ "bnul",    BBOCB(16,BOF,CBSO,0,1), BBOYCB_MASK, PPC,	{ CR, BD } },
-{ "bnua-",   BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnua+",   BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnua",    BBOCB(16,BOF,CBSO,1,0), BBOYCB_MASK, PPC,	{ CR, BDA } },
-{ "bnula-",  BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDMA } },
-{ "bnula+",  BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDPA } },
-{ "bnula",   BBOCB(16,BOF,CBSO,1,1), BBOYCB_MASK, PPC,	{ CR, BDA } },
-{ "bdnzt-",  BBO(16,BODNZT,0,0), BBOY_MASK, PPC,	{ BI, BDM } },
-{ "bdnzt+",  BBO(16,BODNZT,0,0), BBOY_MASK, PPC,	{ BI, BDP } },
-{ "bdnzt",   BBO(16,BODNZT,0,0), BBOY_MASK, PPC,	{ BI, BD } },
-{ "bdnztl-", BBO(16,BODNZT,0,1), BBOY_MASK, PPC,	{ BI, BDM } },
-{ "bdnztl+", BBO(16,BODNZT,0,1), BBOY_MASK, PPC,	{ BI, BDP } },
-{ "bdnztl",  BBO(16,BODNZT,0,1), BBOY_MASK, PPC,	{ BI, BD } },
-{ "bdnzta-", BBO(16,BODNZT,1,0), BBOY_MASK, PPC,	{ BI, BDMA } },
-{ "bdnzta+", BBO(16,BODNZT,1,0), BBOY_MASK, PPC,	{ BI, BDPA } },
-{ "bdnzta",  BBO(16,BODNZT,1,0), BBOY_MASK, PPC,	{ BI, BDA } },
-{ "bdnztla-",BBO(16,BODNZT,1,1), BBOY_MASK, PPC,	{ BI, BDMA } },
-{ "bdnztla+",BBO(16,BODNZT,1,1), BBOY_MASK, PPC,	{ BI, BDPA } },
-{ "bdnztla", BBO(16,BODNZT,1,1), BBOY_MASK, PPC,	{ BI, BDA } },
-{ "bdnzf-",  BBO(16,BODNZF,0,0), BBOY_MASK, PPC,	{ BI, BDM } },
-{ "bdnzf+",  BBO(16,BODNZF,0,0), BBOY_MASK, PPC,	{ BI, BDP } },
-{ "bdnzf",   BBO(16,BODNZF,0,0), BBOY_MASK, PPC,	{ BI, BD } },
-{ "bdnzfl-", BBO(16,BODNZF,0,1), BBOY_MASK, PPC,	{ BI, BDM } },
-{ "bdnzfl+", BBO(16,BODNZF,0,1), BBOY_MASK, PPC,	{ BI, BDP } },
-{ "bdnzfl",  BBO(16,BODNZF,0,1), BBOY_MASK, PPC,	{ BI, BD } },
-{ "bdnzfa-", BBO(16,BODNZF,1,0), BBOY_MASK, PPC,	{ BI, BDMA } },
-{ "bdnzfa+", BBO(16,BODNZF,1,0), BBOY_MASK, PPC,	{ BI, BDPA } },
-{ "bdnzfa",  BBO(16,BODNZF,1,0), BBOY_MASK, PPC,	{ BI, BDA } },
-{ "bdnzfla-",BBO(16,BODNZF,1,1), BBOY_MASK, PPC,	{ BI, BDMA } },
-{ "bdnzfla+",BBO(16,BODNZF,1,1), BBOY_MASK, PPC,	{ BI, BDPA } },
-{ "bdnzfla", BBO(16,BODNZF,1,1), BBOY_MASK, PPC,	{ BI, BDA } },
-{ "bt-",     BBO(16,BOT,0,0), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bt+",     BBO(16,BOT,0,0), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bt",	     BBO(16,BOT,0,0), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bbt",     BBO(16,BOT,0,0), BBOY_MASK, POWER,		{ BI, BD } },
-{ "btl-",    BBO(16,BOT,0,1), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "btl+",    BBO(16,BOT,0,1), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "btl",     BBO(16,BOT,0,1), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bbtl",    BBO(16,BOT,0,1), BBOY_MASK, POWER,		{ BI, BD } },
-{ "bta-",    BBO(16,BOT,1,0), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bta+",    BBO(16,BOT,1,0), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bta",     BBO(16,BOT,1,0), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bbta",    BBO(16,BOT,1,0), BBOY_MASK, POWER,		{ BI, BDA } },
-{ "btla-",   BBO(16,BOT,1,1), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "btla+",   BBO(16,BOT,1,1), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "btla",    BBO(16,BOT,1,1), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bbtla",   BBO(16,BOT,1,1), BBOY_MASK, POWER,		{ BI, BDA } },
-{ "bf-",     BBO(16,BOF,0,0), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bf+",     BBO(16,BOF,0,0), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bf",	     BBO(16,BOF,0,0), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bbf",     BBO(16,BOF,0,0), BBOY_MASK, POWER,		{ BI, BD } },
-{ "bfl-",    BBO(16,BOF,0,1), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bfl+",    BBO(16,BOF,0,1), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bfl",     BBO(16,BOF,0,1), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bbfl",    BBO(16,BOF,0,1), BBOY_MASK, POWER,		{ BI, BD } },
-{ "bfa-",    BBO(16,BOF,1,0), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bfa+",    BBO(16,BOF,1,0), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bfa",     BBO(16,BOF,1,0), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bbfa",    BBO(16,BOF,1,0), BBOY_MASK, POWER,		{ BI, BDA } },
-{ "bfla-",   BBO(16,BOF,1,1), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bfla+",   BBO(16,BOF,1,1), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bfla",    BBO(16,BOF,1,1), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bbfla",   BBO(16,BOF,1,1), BBOY_MASK, POWER,		{ BI, BDA } },
-{ "bdzt-",   BBO(16,BODZT,0,0), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bdzt+",   BBO(16,BODZT,0,0), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bdzt",    BBO(16,BODZT,0,0), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bdztl-",  BBO(16,BODZT,0,1), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bdztl+",  BBO(16,BODZT,0,1), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bdztl",   BBO(16,BODZT,0,1), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bdzta-",  BBO(16,BODZT,1,0), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bdzta+",  BBO(16,BODZT,1,0), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bdzta",   BBO(16,BODZT,1,0), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bdztla-", BBO(16,BODZT,1,1), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bdztla+", BBO(16,BODZT,1,1), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bdztla",  BBO(16,BODZT,1,1), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bdzf-",   BBO(16,BODZF,0,0), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bdzf+",   BBO(16,BODZF,0,0), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bdzf",    BBO(16,BODZF,0,0), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bdzfl-",  BBO(16,BODZF,0,1), BBOY_MASK, PPC,		{ BI, BDM } },
-{ "bdzfl+",  BBO(16,BODZF,0,1), BBOY_MASK, PPC,		{ BI, BDP } },
-{ "bdzfl",   BBO(16,BODZF,0,1), BBOY_MASK, PPC,		{ BI, BD } },
-{ "bdzfa-",  BBO(16,BODZF,1,0), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bdzfa+",  BBO(16,BODZF,1,0), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bdzfa",   BBO(16,BODZF,1,0), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bdzfla-", BBO(16,BODZF,1,1), BBOY_MASK, PPC,		{ BI, BDMA } },
-{ "bdzfla+", BBO(16,BODZF,1,1), BBOY_MASK, PPC,		{ BI, BDPA } },
-{ "bdzfla",  BBO(16,BODZF,1,1), BBOY_MASK, PPC,		{ BI, BDA } },
-{ "bc-",     B(16,0,0),	B_MASK,		PPC,		{ BOE, BI, BDM } },
-{ "bc+",     B(16,0,0),	B_MASK,		PPC,		{ BOE, BI, BDP } },
-{ "bc",	     B(16,0,0),	B_MASK,		PPC|POWER,	{ BO, BI, BD } },
-{ "bcl-",    B(16,0,1),	B_MASK,		PPC,		{ BOE, BI, BDM } },
-{ "bcl+",    B(16,0,1),	B_MASK,		PPC,		{ BOE, BI, BDP } },
-{ "bcl",     B(16,0,1),	B_MASK,		PPC|POWER,	{ BO, BI, BD } },
-{ "bca-",    B(16,1,0),	B_MASK,		PPC,		{ BOE, BI, BDMA } },
-{ "bca+",    B(16,1,0),	B_MASK,		PPC,		{ BOE, BI, BDPA } },
-{ "bca",     B(16,1,0),	B_MASK,		PPC|POWER,	{ BO, BI, BDA } },
-{ "bcla-",   B(16,1,1),	B_MASK,		PPC,		{ BOE, BI, BDMA } },
-{ "bcla+",   B(16,1,1),	B_MASK,		PPC,		{ BOE, BI, BDPA } },
-{ "bcla",    B(16,1,1),	B_MASK,		PPC|POWER,	{ BO, BI, BDA } },
-
-{ "sc",      SC(17,1,0), 0xffffffff,	PPC,		{ 0 } },
-{ "svc",     SC(17,0,0), SC_MASK,	POWER,		{ LEV, FL1, FL2 } },
-{ "svcl",    SC(17,0,1), SC_MASK,	POWER,		{ LEV, FL1, FL2 } },
-{ "svca",    SC(17,1,0), SC_MASK,	POWER,		{ SV } },
-{ "svcla",   SC(17,1,1), SC_MASK,	POWER,		{ SV } },
-
-{ "b",	     B(18,0,0),	B_MASK,		PPC|POWER,	{ LI } },
-{ "bl",      B(18,0,1),	B_MASK,		PPC|POWER,	{ LI } },
-{ "ba",      B(18,1,0),	B_MASK,		PPC|POWER,	{ LIA } },
-{ "bla",     B(18,1,1),	B_MASK,		PPC|POWER,	{ LIA } },
-
-{ "mcrf",    XL(19,0),	XLBB_MASK|(3<<21)|(3<<16), PPC|POWER, { BF, BFA } },
-
-{ "blr",     XLO(19,BOU,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "br",      XLO(19,BOU,16,0), XLBOBIBB_MASK, POWER,	{ 0 } },
-{ "blrl",    XLO(19,BOU,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "brl",     XLO(19,BOU,16,1), XLBOBIBB_MASK, POWER,	{ 0 } },
-{ "bdnzlr",  XLO(19,BODNZ,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdnzlr-", XLO(19,BODNZ,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdnzlr+", XLO(19,BODNZP,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdnzlrl", XLO(19,BODNZ,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdnzlrl-",XLO(19,BODNZ,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdnzlrl+",XLO(19,BODNZP,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlr",   XLO(19,BODZ,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlr-",  XLO(19,BODZ,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlr+",  XLO(19,BODZP,16,0), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlrl",  XLO(19,BODZ,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlrl-", XLO(19,BODZ,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bdzlrl+", XLO(19,BODZP,16,1), XLBOBIBB_MASK, PPC,	{ 0 } },
-{ "bltlr",   XLOCB(19,BOT,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltlr-",  XLOCB(19,BOT,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltlr+",  XLOCB(19,BOTP,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltr",    XLOCB(19,BOT,CBLT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bltlrl",  XLOCB(19,BOT,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltlrl-", XLOCB(19,BOT,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltlrl+", XLOCB(19,BOTP,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltrl",   XLOCB(19,BOT,CBLT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bgtlr",   XLOCB(19,BOT,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtlr-",  XLOCB(19,BOT,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtlr+",  XLOCB(19,BOTP,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtr",    XLOCB(19,BOT,CBGT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bgtlrl",  XLOCB(19,BOT,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtlrl-", XLOCB(19,BOT,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtlrl+", XLOCB(19,BOTP,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtrl",   XLOCB(19,BOT,CBGT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "beqlr",   XLOCB(19,BOT,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqlr-",  XLOCB(19,BOT,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqlr+",  XLOCB(19,BOTP,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqr",    XLOCB(19,BOT,CBEQ,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "beqlrl",  XLOCB(19,BOT,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqlrl-", XLOCB(19,BOT,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqlrl+", XLOCB(19,BOTP,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqrl",   XLOCB(19,BOT,CBEQ,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bsolr",   XLOCB(19,BOT,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsolr-",  XLOCB(19,BOT,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsolr+",  XLOCB(19,BOTP,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsor",    XLOCB(19,BOT,CBSO,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bsolrl",  XLOCB(19,BOT,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsolrl-", XLOCB(19,BOT,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsolrl+", XLOCB(19,BOTP,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsorl",   XLOCB(19,BOT,CBSO,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bunlr",   XLOCB(19,BOT,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunlr-",  XLOCB(19,BOT,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunlr+",  XLOCB(19,BOTP,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunlrl",  XLOCB(19,BOT,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunlrl-", XLOCB(19,BOT,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunlrl+", XLOCB(19,BOTP,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgelr",   XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgelr-",  XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgelr+",  XLOCB(19,BOFP,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bger",    XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bgelrl",  XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgelrl-", XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgelrl+", XLOCB(19,BOFP,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgerl",   XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnllr",   XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnllr-",  XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnllr+",  XLOCB(19,BOFP,CBLT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlr",    XLOCB(19,BOF,CBLT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnllrl",  XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnllrl-", XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnllrl+", XLOCB(19,BOFP,CBLT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlrl",   XLOCB(19,BOF,CBLT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "blelr",   XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "blelr-",  XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "blelr+",  XLOCB(19,BOFP,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bler",    XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "blelrl",  XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blelrl-", XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blelrl+", XLOCB(19,BOFP,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blerl",   XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnglr",   XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnglr-",  XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnglr+",  XLOCB(19,BOFP,CBGT,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngr",    XLOCB(19,BOF,CBGT,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnglrl",  XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnglrl-", XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnglrl+", XLOCB(19,BOFP,CBGT,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngrl",   XLOCB(19,BOF,CBGT,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnelr",   XLOCB(19,BOF,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnelr-",  XLOCB(19,BOF,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnelr+",  XLOCB(19,BOFP,CBEQ,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bner",    XLOCB(19,BOF,CBEQ,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnelrl",  XLOCB(19,BOF,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnelrl-", XLOCB(19,BOF,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnelrl+", XLOCB(19,BOFP,CBEQ,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnerl",   XLOCB(19,BOF,CBEQ,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnslr",   XLOCB(19,BOF,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnslr-",  XLOCB(19,BOF,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnslr+",  XLOCB(19,BOFP,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsr",    XLOCB(19,BOF,CBSO,16,0), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnslrl",  XLOCB(19,BOF,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnslrl-", XLOCB(19,BOF,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnslrl+", XLOCB(19,BOFP,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsrl",   XLOCB(19,BOF,CBSO,16,1), XLBOCBBB_MASK, POWER, { CR } },
-{ "bnulr",   XLOCB(19,BOF,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnulr-",  XLOCB(19,BOF,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnulr+",  XLOCB(19,BOFP,CBSO,16,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnulrl",  XLOCB(19,BOF,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnulrl-", XLOCB(19,BOF,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnulrl+", XLOCB(19,BOFP,CBSO,16,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "btlr",    XLO(19,BOT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "btlr-",   XLO(19,BOT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "btlr+",   XLO(19,BOTP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bbtr",    XLO(19,BOT,16,0), XLBOBB_MASK, POWER,	{ BI } },
-{ "btlrl",   XLO(19,BOT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "btlrl-",  XLO(19,BOT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "btlrl+",  XLO(19,BOTP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bbtrl",   XLO(19,BOT,16,1), XLBOBB_MASK, POWER,	{ BI } },
-{ "bflr",    XLO(19,BOF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bflr-",   XLO(19,BOF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bflr+",   XLO(19,BOFP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bbfr",    XLO(19,BOF,16,0), XLBOBB_MASK, POWER,	{ BI } },
-{ "bflrl",   XLO(19,BOF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bflrl-",  XLO(19,BOF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bflrl+",  XLO(19,BOFP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bbfrl",   XLO(19,BOF,16,1), XLBOBB_MASK, POWER,	{ BI } },
-{ "bdnztlr", XLO(19,BODNZT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnztlr-",XLO(19,BODNZT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnztlr+",XLO(19,BODNZTP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnztlrl",XLO(19,BODNZT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnztlrl-",XLO(19,BODNZT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnztlrl+",XLO(19,BODNZTP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflr", XLO(19,BODNZF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflr-",XLO(19,BODNZF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflr+",XLO(19,BODNZFP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflrl",XLO(19,BODNZF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflrl-",XLO(19,BODNZF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdnzflrl+",XLO(19,BODNZFP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlr",  XLO(19,BODZT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlr-", XLO(19,BODZT,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlr+", XLO(19,BODZTP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlrl", XLO(19,BODZT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlrl-",XLO(19,BODZT,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdztlrl+",XLO(19,BODZTP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflr",  XLO(19,BODZF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflr-", XLO(19,BODZF,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflr+", XLO(19,BODZFP,16,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflrl", XLO(19,BODZF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflrl-",XLO(19,BODZF,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bdzflrl+",XLO(19,BODZFP,16,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bclr",    XLLK(19,16,0), XLYBB_MASK,	PPC,		{ BO, BI } },
-{ "bclrl",   XLLK(19,16,1), XLYBB_MASK,	PPC,		{ BO, BI } },
-{ "bclr+",   XLYLK(19,16,1,0), XLYBB_MASK, PPC,		{ BOE, BI } },
-{ "bclrl+",  XLYLK(19,16,1,1), XLYBB_MASK, PPC,		{ BOE, BI } },
-{ "bclr-",   XLYLK(19,16,0,0), XLYBB_MASK, PPC,		{ BOE, BI } },
-{ "bclrl-",  XLYLK(19,16,0,1), XLYBB_MASK, PPC,		{ BOE, BI } },
-{ "bcr",     XLLK(19,16,0), XLBB_MASK,	POWER,		{ BO, BI } },
-{ "bcrl",    XLLK(19,16,1), XLBB_MASK,	POWER,		{ BO, BI } },
-
-{ "crnot",   XL(19,33), XL_MASK,	PPC,		{ BT, BA, BBA } },
-{ "crnor",   XL(19,33),	XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "rfi",     XL(19,50),	0xffffffff,	PPC|POWER,	{ 0 } },
-{ "rfci",    XL(19,51),	0xffffffff,	PPC,		{ 0 } },
-
-{ "rfsvc",   XL(19,82),	0xffffffff,	POWER,		{ 0 } },
-
-{ "crandc",  XL(19,129), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "isync",   XL(19,150), 0xffffffff,	PPC,		{ 0 } },
-{ "ics",     XL(19,150), 0xffffffff,	POWER,		{ 0 } },
-
-{ "crclr",   XL(19,193), XL_MASK,	PPC,		{ BT, BAT, BBA } },
-{ "crxor",   XL(19,193), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "crnand",  XL(19,225), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "crand",   XL(19,257), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "crset",   XL(19,289), XL_MASK,	PPC,		{ BT, BAT, BBA } },
-{ "creqv",   XL(19,289), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "crorc",   XL(19,417), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "crmove",  XL(19,449), XL_MASK,	PPC,		{ BT, BA, BBA } },
-{ "cror",    XL(19,449), XL_MASK,	PPC|POWER,	{ BT, BA, BB } },
-
-{ "bctr",    XLO(19,BOU,528,0), XLBOBIBB_MASK, PPC|POWER, { 0 } },
-{ "bctrl",   XLO(19,BOU,528,1), XLBOBIBB_MASK, PPC|POWER, { 0 } },
-{ "bltctr",  XLOCB(19,BOT,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltctr-", XLOCB(19,BOT,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltctr+", XLOCB(19,BOTP,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltctrl", XLOCB(19,BOT,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltctrl-",XLOCB(19,BOT,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bltctrl+",XLOCB(19,BOTP,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctr",  XLOCB(19,BOT,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctr-", XLOCB(19,BOT,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctr+", XLOCB(19,BOTP,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctrl", XLOCB(19,BOT,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctrl-",XLOCB(19,BOT,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgtctrl+",XLOCB(19,BOTP,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctr",  XLOCB(19,BOT,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctr-", XLOCB(19,BOT,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctr+", XLOCB(19,BOTP,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctrl", XLOCB(19,BOT,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctrl-",XLOCB(19,BOT,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "beqctrl+",XLOCB(19,BOTP,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctr",  XLOCB(19,BOT,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctr-", XLOCB(19,BOT,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctr+", XLOCB(19,BOTP,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctrl", XLOCB(19,BOT,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctrl-",XLOCB(19,BOT,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bsoctrl+",XLOCB(19,BOTP,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctr",  XLOCB(19,BOT,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctr-", XLOCB(19,BOT,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctr+", XLOCB(19,BOTP,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctrl", XLOCB(19,BOT,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctrl-",XLOCB(19,BOT,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bunctrl+",XLOCB(19,BOTP,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectr",  XLOCB(19,BOF,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectr-", XLOCB(19,BOF,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectr+", XLOCB(19,BOFP,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectrl", XLOCB(19,BOF,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectrl-",XLOCB(19,BOF,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bgectrl+",XLOCB(19,BOFP,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctr",  XLOCB(19,BOF,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctr-", XLOCB(19,BOF,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctr+", XLOCB(19,BOFP,CBLT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctrl", XLOCB(19,BOF,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctrl-",XLOCB(19,BOF,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnlctrl+",XLOCB(19,BOFP,CBLT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectr",  XLOCB(19,BOF,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectr-", XLOCB(19,BOF,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectr+", XLOCB(19,BOFP,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectrl", XLOCB(19,BOF,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectrl-",XLOCB(19,BOF,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "blectrl+",XLOCB(19,BOFP,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctr",  XLOCB(19,BOF,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctr-", XLOCB(19,BOF,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctr+", XLOCB(19,BOFP,CBGT,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctrl", XLOCB(19,BOF,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctrl-",XLOCB(19,BOF,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bngctrl+",XLOCB(19,BOFP,CBGT,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectr",  XLOCB(19,BOF,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectr-", XLOCB(19,BOF,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectr+", XLOCB(19,BOFP,CBEQ,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectrl", XLOCB(19,BOF,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectrl-",XLOCB(19,BOF,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnectrl+",XLOCB(19,BOFP,CBEQ,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctr",  XLOCB(19,BOF,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctr-", XLOCB(19,BOF,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctr+", XLOCB(19,BOFP,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctrl", XLOCB(19,BOF,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctrl-",XLOCB(19,BOF,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnsctrl+",XLOCB(19,BOFP,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctr",  XLOCB(19,BOF,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctr-", XLOCB(19,BOF,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctr+", XLOCB(19,BOFP,CBSO,528,0), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctrl", XLOCB(19,BOF,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctrl-",XLOCB(19,BOF,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "bnuctrl+",XLOCB(19,BOFP,CBSO,528,1), XLBOCBBB_MASK, PPC, { CR } },
-{ "btctr",   XLO(19,BOT,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "btctr-",  XLO(19,BOT,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "btctr+",  XLO(19,BOTP,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "btctrl",  XLO(19,BOT,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "btctrl-", XLO(19,BOT,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "btctrl+", XLO(19,BOTP,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctr",   XLO(19,BOF,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctr-",  XLO(19,BOF,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctr+",  XLO(19,BOFP,528,0), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctrl",  XLO(19,BOF,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctrl-", XLO(19,BOF,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bfctrl+", XLO(19,BOFP,528,1), XLBOBB_MASK, PPC,	{ BI } },
-{ "bcctr",   XLLK(19,528,0), XLYBB_MASK, PPC,		{ BO, BI } },
-{ "bcctr-",  XLYLK(19,528,0,0), XLYBB_MASK, PPC,	{ BOE, BI } },
-{ "bcctr+",  XLYLK(19,528,1,0), XLYBB_MASK, PPC,	{ BOE, BI } },
-{ "bcctrl",  XLLK(19,528,1), XLYBB_MASK, PPC,		{ BO, BI } },
-{ "bcctrl-", XLYLK(19,528,0,1), XLYBB_MASK, PPC,	{ BOE, BI } },
-{ "bcctrl+", XLYLK(19,528,1,1), XLYBB_MASK, PPC,	{ BOE, BI } },
-{ "bcc",     XLLK(19,528,0), XLBB_MASK,	POWER,		{ BO, BI } },
-{ "bccl",    XLLK(19,528,1), XLBB_MASK,	POWER,		{ BO, BI } },
-
-{ "rlwimi",  M(20,0),	M_MASK,		PPC,		{ RA,RS,SH,MBE,ME } },
-{ "rlimi",   M(20,0),	M_MASK,		POWER,		{ RA,RS,SH,MBE,ME } },
-
-{ "rlwimi.", M(20,1),	M_MASK,		PPC,		{ RA,RS,SH,MBE,ME } },
-{ "rlimi.",  M(20,1),	M_MASK,		POWER,		{ RA,RS,SH,MBE,ME } },
-
-{ "rotlwi",  MME(21,31,0), MMBME_MASK,	PPC,		{ RA, RS, SH } },
-{ "clrlwi",  MME(21,31,0), MSHME_MASK,	PPC,		{ RA, RS, MB } },
-{ "rlwinm",  M(21,0),	M_MASK,		PPC,		{ RA,RS,SH,MBE,ME } },
-{ "rlinm",   M(21,0),	M_MASK,		POWER,		{ RA,RS,SH,MBE,ME } },
-{ "rotlwi.", MME(21,31,1), MMBME_MASK,	PPC,		{ RA,RS,SH } },
-{ "clrlwi.", MME(21,31,1), MSHME_MASK,	PPC,		{ RA, RS, MB } },
-{ "rlwinm.", M(21,1),	M_MASK,		PPC,		{ RA,RS,SH,MBE,ME } },
-{ "rlinm.",  M(21,1),	M_MASK,		POWER,		{ RA,RS,SH,MBE,ME } },
-
-{ "rlmi",    M(22,0),	M_MASK,		POWER|M601,	{ RA,RS,RB,MBE,ME } },
-{ "rlmi.",   M(22,1),	M_MASK,		POWER|M601,	{ RA,RS,RB,MBE,ME } },
-
-{ "rotlw",   MME(23,31,0), MMBME_MASK,	PPC,		{ RA, RS, RB } },
-{ "rlwnm",   M(23,0),	M_MASK,		PPC,		{ RA,RS,RB,MBE,ME } },
-{ "rlnm",    M(23,0),	M_MASK,		POWER,		{ RA,RS,RB,MBE,ME } },
-{ "rotlw.",  MME(23,31,1), MMBME_MASK,	PPC,		{ RA, RS, RB } },
-{ "rlwnm.",  M(23,1),	M_MASK,		PPC,		{ RA,RS,RB,MBE,ME } },
-{ "rlnm.",   M(23,1),	M_MASK,		POWER,		{ RA,RS,RB,MBE,ME } },
-
-{ "nop",     OP(24),	0xffffffff,	PPC,		{ 0 } },
-{ "ori",     OP(24),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "oril",    OP(24),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "oris",    OP(25),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "oriu",    OP(25),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "xori",    OP(26),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "xoril",   OP(26),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "xoris",   OP(27),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "xoriu",   OP(27),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "andi.",   OP(28),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "andil.",  OP(28),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "andis.",  OP(29),	OP_MASK,	PPC,		{ RA, RS, UI } },
-{ "andiu.",  OP(29),	OP_MASK,	POWER,		{ RA, RS, UI } },
-
-{ "rotldi",  MD(30,0,0), MDMB_MASK,	PPC|B64,	{ RA, RS, SH6 } },
-{ "clrldi",  MD(30,0,0), MDSH_MASK,	PPC|B64,	{ RA, RS, MB6 } },
-{ "rldicl",  MD(30,0,0), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-{ "rotldi.", MD(30,0,1), MDMB_MASK,	PPC|B64,	{ RA, RS, SH6 } },
-{ "clrldi.", MD(30,0,1), MDSH_MASK,	PPC|B64,	{ RA, RS, MB6 } },
-{ "rldicl.", MD(30,0,1), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-
-{ "rldicr",  MD(30,1,0), MD_MASK,	PPC|B64,	{ RA, RS, SH6, ME6 } },
-{ "rldicr.", MD(30,1,1), MD_MASK,	PPC|B64,	{ RA, RS, SH6, ME6 } },
-
-{ "rldic",   MD(30,2,0), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-{ "rldic.",  MD(30,2,1), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-
-{ "rldimi",  MD(30,3,0), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-{ "rldimi.", MD(30,3,1), MD_MASK,	PPC|B64,	{ RA, RS, SH6, MB6 } },
-
-{ "rotld",   MDS(30,8,0), MDSMB_MASK,	PPC|B64,	{ RA, RS, RB } },
-{ "rldcl",   MDS(30,8,0), MDS_MASK,	PPC|B64,	{ RA, RS, RB, MB6 } },
-{ "rotld.",  MDS(30,8,1), MDSMB_MASK,	PPC|B64,	{ RA, RS, RB } },
-{ "rldcl.",  MDS(30,8,1), MDS_MASK,	PPC|B64,	{ RA, RS, RB, MB6 } },
-
-{ "rldcr",   MDS(30,9,0), MDS_MASK,	PPC|B64,	{ RA, RS, RB, ME6 } },
-{ "rldcr.",  MDS(30,9,1), MDS_MASK,	PPC|B64,	{ RA, RS, RB, ME6 } },
-
-{ "cmpw",    XCMPL(31,0,0), XCMPL_MASK, PPC,		{ OBF, RA, RB } },
-{ "cmpd",    XCMPL(31,0,1), XCMPL_MASK, PPC|B64,	{ OBF, RA, RB } },
-{ "cmp",     X(31,0),	XCMP_MASK,	PPC,		{ BF, L, RA, RB } },
-{ "cmp",     X(31,0),	XCMPL_MASK,	POWER,		{ BF, RA, RB } },
-
-{ "twlgt",   XTO(31,4,TOLGT), XTO_MASK, PPC,		{ RA, RB } },
-{ "tlgt",    XTO(31,4,TOLGT), XTO_MASK, POWER,		{ RA, RB } },
-{ "twllt",   XTO(31,4,TOLLT), XTO_MASK, PPC,		{ RA, RB } },
-{ "tllt",    XTO(31,4,TOLLT), XTO_MASK, POWER,		{ RA, RB } },
-{ "tweq",    XTO(31,4,TOEQ), XTO_MASK,	PPC,		{ RA, RB } },
-{ "teq",     XTO(31,4,TOEQ), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twlge",   XTO(31,4,TOLGE), XTO_MASK, PPC,		{ RA, RB } },
-{ "tlge",    XTO(31,4,TOLGE), XTO_MASK, POWER,		{ RA, RB } },
-{ "twlnl",   XTO(31,4,TOLNL), XTO_MASK, PPC,		{ RA, RB } },
-{ "tlnl",    XTO(31,4,TOLNL), XTO_MASK, POWER,		{ RA, RB } },
-{ "twlle",   XTO(31,4,TOLLE), XTO_MASK, PPC,		{ RA, RB } },
-{ "tlle",    XTO(31,4,TOLLE), XTO_MASK, POWER,		{ RA, RB } },
-{ "twlng",   XTO(31,4,TOLNG), XTO_MASK, PPC,		{ RA, RB } },
-{ "tlng",    XTO(31,4,TOLNG), XTO_MASK, POWER,		{ RA, RB } },
-{ "twgt",    XTO(31,4,TOGT), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tgt",     XTO(31,4,TOGT), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twge",    XTO(31,4,TOGE), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tge",     XTO(31,4,TOGE), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twnl",    XTO(31,4,TONL), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tnl",     XTO(31,4,TONL), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twlt",    XTO(31,4,TOLT), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tlt",     XTO(31,4,TOLT), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twle",    XTO(31,4,TOLE), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tle",     XTO(31,4,TOLE), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twng",    XTO(31,4,TONG), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tng",     XTO(31,4,TONG), XTO_MASK,	POWER,		{ RA, RB } },
-{ "twne",    XTO(31,4,TONE), XTO_MASK,	PPC,		{ RA, RB } },
-{ "tne",     XTO(31,4,TONE), XTO_MASK,	POWER,		{ RA, RB } },
-{ "trap",    XTO(31,4,TOU), 0xffffffff,	PPC,		{ 0 } },
-{ "tw",      X(31,4),	X_MASK,		PPC,		{ TO, RA, RB } },
-{ "t",       X(31,4),	X_MASK,		POWER,		{ TO, RA, RB } },
-
-{ "subfc",   XO(31,8,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sf",      XO(31,8,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subc",    XO(31,8,0,0), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subfc.",  XO(31,8,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sf.",     XO(31,8,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subc.",   XO(31,8,0,1), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subfco",  XO(31,8,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfo",     XO(31,8,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subco",   XO(31,8,1,0), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subfco.", XO(31,8,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfo.",    XO(31,8,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subco.",  XO(31,8,1,1), XO_MASK,	PPC,		{ RT, RB, RA } },
-
-{ "mulhdu",  XO(31,9,0,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "mulhdu.", XO(31,9,0,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-
-{ "addc",    XO(31,10,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "a",       XO(31,10,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addc.",   XO(31,10,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "a.",      XO(31,10,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addco",   XO(31,10,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "ao",      XO(31,10,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addco.",  XO(31,10,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "ao.",     XO(31,10,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-
-{ "mulhwu",  XO(31,11,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "mulhwu.", XO(31,11,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-
-{ "mfcr",    X(31,19),	XRARB_MASK,	POWER|PPC,	{ RT } },
-
-{ "lwarx",   X(31,20),	X_MASK,		PPC,		{ RT, RA, RB } },
-
-{ "ldx",     X(31,21),	X_MASK,		PPC|B64,	{ RT, RA, RB } },
-
-{ "lwzx",    X(31,23),	X_MASK,		PPC,		{ RT, RA, RB } },
-{ "lx",      X(31,23),	X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "slw",     XRC(31,24,0), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sl",      XRC(31,24,0), X_MASK,	POWER,		{ RA, RS, RB } },
-{ "slw.",    XRC(31,24,1), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sl.",     XRC(31,24,1), X_MASK,	POWER,		{ RA, RS, RB } },
-
-{ "cntlzw",  XRC(31,26,0), XRB_MASK,	PPC,		{ RA, RS } },
-{ "cntlz",   XRC(31,26,0), XRB_MASK,	POWER,		{ RA, RS } },
-{ "cntlzw.", XRC(31,26,1), XRB_MASK,	PPC,		{ RA, RS } },
-{ "cntlz.",  XRC(31,26,1), XRB_MASK, 	POWER,		{ RA, RS } },
-
-{ "sld",     XRC(31,27,0), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-{ "sld.",    XRC(31,27,1), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-
-{ "and",     XRC(31,28,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "and.",    XRC(31,28,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "maskg",   XRC(31,29,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "maskg.",  XRC(31,29,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "cmplw",   XCMPL(31,32,0), XCMPL_MASK, PPC,		{ OBF, RA, RB } },
-{ "cmpld",   XCMPL(31,32,1), XCMPL_MASK, PPC|B64,	{ OBF, RA, RB } },
-{ "cmpl",    X(31,32),	XCMP_MASK,	PPC,		{ BF, L, RA, RB } },
-{ "cmpl",    X(31,32),	XCMPL_MASK,	POWER,		{ BF, RA, RB } },
-
-{ "subf",    XO(31,40,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sub",     XO(31,40,0,0), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subf.",   XO(31,40,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sub.",    XO(31,40,0,1), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subfo",   XO(31,40,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "subo",    XO(31,40,1,0), XO_MASK,	PPC,		{ RT, RB, RA } },
-{ "subfo.",  XO(31,40,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "subo.",   XO(31,40,1,1), XO_MASK,	PPC,		{ RT, RB, RA } },
-
-{ "ldux",    X(31,53),	X_MASK,		PPC|B64,	{ RT, RAL, RB } },
-
-{ "dcbst",   X(31,54),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "lwzux",   X(31,55),	X_MASK,		PPC,		{ RT, RAL, RB } },
-{ "lux",     X(31,55),	X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "cntlzd",  XRC(31,58,0), XRB_MASK,	PPC|B64,	{ RA, RS } },
-{ "cntlzd.", XRC(31,58,1), XRB_MASK,	PPC|B64,	{ RA, RS } },
-
-{ "andc",    XRC(31,60,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "andc.",   XRC(31,60,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "tdlgt",   XTO(31,68,TOLGT), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdllt",   XTO(31,68,TOLLT), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdeq",    XTO(31,68,TOEQ), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdlge",   XTO(31,68,TOLGE), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdlnl",   XTO(31,68,TOLNL), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdlle",   XTO(31,68,TOLLE), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdlng",   XTO(31,68,TOLNG), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdgt",    XTO(31,68,TOGT), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdge",    XTO(31,68,TOGE), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdnl",    XTO(31,68,TONL), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdlt",    XTO(31,68,TOLT), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdle",    XTO(31,68,TOLE), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdng",    XTO(31,68,TONG), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "tdne",    XTO(31,68,TONE), XTO_MASK, PPC|B64,	{ RA, RB } },
-{ "td",	     X(31,68),	X_MASK,		PPC|B64,	{ TO, RA, RB } },
-
-{ "mulhd",   XO(31,73,0,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "mulhd.",  XO(31,73,0,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-
-{ "mulhw",   XO(31,75,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "mulhw.",  XO(31,75,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-
-{ "mfmsr",   X(31,83),	XRARB_MASK,	PPC|POWER,	{ RT } },
-
-{ "ldarx",   X(31,84),	X_MASK,		PPC|B64,	{ RT, RA, RB } },
-
-{ "dcbf",    X(31,86),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "lbzx",    X(31,87),	X_MASK,		PPC|POWER,	{ RT, RA, RB } },
-
-{ "neg",     XO(31,104,0,0), XORB_MASK,	PPC|POWER,	{ RT, RA } },
-{ "neg.",    XO(31,104,0,1), XORB_MASK,	PPC|POWER,	{ RT, RA } },
-{ "nego",    XO(31,104,1,0), XORB_MASK,	PPC|POWER,	{ RT, RA } },
-{ "nego.",   XO(31,104,1,1), XORB_MASK,	PPC|POWER,	{ RT, RA } },
-
-{ "mul",     XO(31,107,0,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "mul.",    XO(31,107,0,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "mulo",    XO(31,107,1,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "mulo.",   XO(31,107,1,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-
-{ "clf",     X(31,118), XRB_MASK,	POWER,		{ RT, RA } },
-
-{ "lbzux",   X(31,119),	X_MASK,		PPC|POWER,	{ RT, RAL, RB } },
-
-{ "not",     XRC(31,124,0), X_MASK,	PPC|POWER,	{ RA, RS, RBS } },
-{ "nor",     XRC(31,124,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "not.",    XRC(31,124,1), X_MASK,	PPC|POWER,	{ RA, RS, RBS } },
-{ "nor.",    XRC(31,124,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "subfe",   XO(31,136,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfe",     XO(31,136,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subfe.",  XO(31,136,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfe.",    XO(31,136,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subfeo",  XO(31,136,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfeo",    XO(31,136,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "subfeo.", XO(31,136,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "sfeo.",   XO(31,136,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-
-{ "adde",    XO(31,138,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "ae",      XO(31,138,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "adde.",   XO(31,138,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "ae.",     XO(31,138,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addeo",   XO(31,138,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "aeo",     XO(31,138,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addeo.",  XO(31,138,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "aeo.",    XO(31,138,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-
-{ "mtcr",    XFXM(31,144,0xff), XFXFXM_MASK|FXM_MASK, PPC|POWER, { RS }},
-{ "mtcrf",   X(31,144),	XFXFXM_MASK,	PPC|POWER,	{ FXM, RS } },
-
-{ "mtmsr",   X(31,146),	XRARB_MASK,	PPC|POWER,	{ RS } },
-
-{ "stdx",    X(31,149), X_MASK,		PPC|B64,	{ RS, RA, RB } },
-
-{ "stwcx.",  XRC(31,150,1), X_MASK,	PPC,		{ RS, RA, RB } },
-
-{ "stwx",    X(31,151), X_MASK,		PPC,		{ RS, RA, RB } },
-{ "stx",     X(31,151), X_MASK,		POWER,		{ RS, RA, RB } },
-
-{ "slq",     XRC(31,152,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "slq.",    XRC(31,152,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "sle",     XRC(31,153,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sle.",    XRC(31,153,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "stdux",   X(31,181),	X_MASK,		PPC|B64,	{ RS, RAS, RB } },
-
-{ "stwux",   X(31,183),	X_MASK,		PPC,		{ RS, RAS, RB } },
-{ "stux",    X(31,183),	X_MASK,		POWER,		{ RS, RA, RB } },
-
-{ "sliq",    XRC(31,184,0), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-{ "sliq.",   XRC(31,184,1), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-
-{ "subfze",  XO(31,200,0,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfze",    XO(31,200,0,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfze.", XO(31,200,0,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfze.",   XO(31,200,0,1), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfzeo", XO(31,200,1,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfzeo",   XO(31,200,1,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfzeo.",XO(31,200,1,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfzeo.",  XO(31,200,1,1), XORB_MASK, POWER,		{ RT, RA } },
-
-{ "addze",   XO(31,202,0,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "aze",     XO(31,202,0,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "addze.",  XO(31,202,0,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "aze.",    XO(31,202,0,1), XORB_MASK, POWER,		{ RT, RA } },
-{ "addzeo",  XO(31,202,1,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "azeo",    XO(31,202,1,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "addzeo.", XO(31,202,1,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "azeo.",   XO(31,202,1,1), XORB_MASK, POWER,		{ RT, RA } },
-
-{ "mtsr",    X(31,210),	XRB_MASK|(1<<20), PPC|POWER|B32, { SR, RS } },
-
-{ "stdcx.",  XRC(31,214,1), X_MASK,	PPC|B64,	{ RS, RA, RB } },
-
-{ "stbx",    X(31,215),	X_MASK,		PPC|POWER,	{ RS, RA, RB } },
-
-{ "sllq",    XRC(31,216,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sllq.",   XRC(31,216,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "sleq",    XRC(31,217,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sleq.",   XRC(31,217,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "subfme",  XO(31,232,0,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfme",    XO(31,232,0,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfme.", XO(31,232,0,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfme.",   XO(31,232,0,1), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfmeo", XO(31,232,1,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfmeo",   XO(31,232,1,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "subfmeo.",XO(31,232,1,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "sfmeo.",  XO(31,232,1,1), XORB_MASK, POWER,		{ RT, RA } },
-
-{ "mulld",   XO(31,233,0,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "mulld.",  XO(31,233,0,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "mulldo",  XO(31,233,1,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "mulldo.", XO(31,233,1,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-
-{ "addme",   XO(31,234,0,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "ame",     XO(31,234,0,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "addme.",  XO(31,234,0,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "ame.",    XO(31,234,0,1), XORB_MASK, POWER,		{ RT, RA } },
-{ "addmeo",  XO(31,234,1,0), XORB_MASK, PPC,		{ RT, RA } },
-{ "ameo",    XO(31,234,1,0), XORB_MASK, POWER,		{ RT, RA } },
-{ "addmeo.", XO(31,234,1,1), XORB_MASK, PPC,		{ RT, RA } },
-{ "ameo.",   XO(31,234,1,1), XORB_MASK, POWER,		{ RT, RA } },
-
-{ "mullw",   XO(31,235,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "muls",    XO(31,235,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "mullw.",  XO(31,235,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "muls.",   XO(31,235,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "mullwo",  XO(31,235,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "mulso",   XO(31,235,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "mullwo.", XO(31,235,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "mulso.",  XO(31,235,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-
-{ "mtsrin",  X(31,242),	XRA_MASK,	PPC|B32,	{ RS, RB } },
-{ "mtsri",   X(31,242),	XRA_MASK,	POWER|B32,	{ RS, RB } },
-
-{ "dcbtst",  X(31,246),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "stbux",   X(31,247),	X_MASK,		PPC|POWER,	{ RS, RAS, RB } },
-
-{ "slliq",   XRC(31,248,0), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-{ "slliq.",  XRC(31,248,1), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-
-{ "doz",     XO(31,264,0,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "doz.",    XO(31,264,0,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "dozo",    XO(31,264,1,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "dozo.",   XO(31,264,1,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-
-{ "add",     XO(31,266,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "cax",     XO(31,266,0,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "add.",    XO(31,266,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "cax.",    XO(31,266,0,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addo",    XO(31,266,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "caxo",    XO(31,266,1,0), XO_MASK,	POWER,		{ RT, RA, RB } },
-{ "addo.",   XO(31,266,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "caxo.",   XO(31,266,1,1), XO_MASK,	POWER,		{ RT, RA, RB } },
-
-{ "lscbx",   XRC(31,277,0), X_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "lscbx.",  XRC(31,277,1), X_MASK,	POWER|M601,	{ RT, RA, RB } },
-
-{ "dcbt",    X(31,278),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "lhzx",    X(31,279),	X_MASK,		PPC|POWER,	{ RT, RA, RB } },
-
-{ "icbt",    X(31,262),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "eqv",     XRC(31,284,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "eqv.",    XRC(31,284,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "tlbie",   X(31,306),	XRTRA_MASK,	PPC,		{ RB } },
-{ "tlbi",    X(31,306),	XRTRA_MASK,	POWER,		{ RB } },
-
-{ "eciwx",   X(31,310), X_MASK,		PPC,		{ RT, RA, RB } },
-
-{ "lhzux",   X(31,311),	X_MASK,		PPC|POWER,	{ RT, RAL, RB } },
-
-{ "xor",     XRC(31,316,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "xor.",    XRC(31,316,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "mfdcr",   X(31,323),	X_MASK,		PPC,		{ RT, SPR } },
-
-{ "div",     XO(31,331,0,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "div.",    XO(31,331,0,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "divo",    XO(31,331,1,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "divo.",   XO(31,331,1,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-
-{ "mfmq",    XSPR(31,339,0), XSPR_MASK,	POWER|M601,	{ RT } },
-{ "mfxer",   XSPR(31,339,1), XSPR_MASK,	PPC|POWER,	{ RT } },
-{ "mfrtcu",  XSPR(31,339,4), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfrtcl",  XSPR(31,339,5), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfdec",   XSPR(31,339,6), XSPR_MASK, POWER|M601,	{ RT } },
-{ "mflr",    XSPR(31,339,8), XSPR_MASK,	PPC|POWER,	{ RT } },
-{ "mfctr",   XSPR(31,339,9), XSPR_MASK,	PPC|POWER,	{ RT } },
-{ "mftid",   XSPR(31,339,17), XSPR_MASK, POWER,		{ RT } },
-{ "mfdsisr", XSPR(31,339,18), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfdar",   XSPR(31,339,19), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfdec",   XSPR(31,339,22), XSPR_MASK, PPC,		{ RT } },
-{ "mfsdr0",  XSPR(31,339,24), XSPR_MASK, POWER,		{ RT } },
-{ "mfsdr1",  XSPR(31,339,25), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfsrr0",  XSPR(31,339,26), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfsrr1",  XSPR(31,339,27), XSPR_MASK, PPC|POWER,	{ RT } },
-{ "mfsprg",  XSPR(31,339,272), XSPRG_MASK, PPC,		{ RT, SPRG } },
-{ "mfasr",   XSPR(31,339,280), XSPR_MASK, PPC|B64,	{ RT } },
-{ "mfear",   XSPR(31,339,282), XSPR_MASK, PPC,		{ RT } },
-{ "mfpvr",   XSPR(31,339,287), XSPR_MASK, PPC,		{ RT } },
-{ "mfibatu", XSPR(31,339,528), XSPRBAT_MASK, PPC,	{ RT, SPRBAT } },
-{ "mfibatl", XSPR(31,339,529), XSPRBAT_MASK, PPC,	{ RT, SPRBAT } },
-{ "mfdbatu", XSPR(31,339,536), XSPRBAT_MASK, PPC,	{ RT, SPRBAT } },
-{ "mfdbatl", XSPR(31,339,537), XSPRBAT_MASK, PPC,	{ RT, SPRBAT } },
-{ "mfspr",   X(31,339),	X_MASK,		PPC|POWER,	{ RT, SPR } },
-
-{ "lwax",    X(31,341),	X_MASK,		PPC|B64,	{ RT, RA, RB } },
-
-{ "lhax",    X(31,343),	X_MASK,		PPC|POWER,	{ RT, RA, RB } },
-
-{ "dccci",   X(31,454),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "abs",     XO(31,360,0,0), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "abs.",    XO(31,360,0,1), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "abso",    XO(31,360,1,0), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "abso.",   XO(31,360,1,1), XORB_MASK, POWER|M601,	{ RT, RA } },
-
-{ "divs",    XO(31,363,0,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "divs.",   XO(31,363,0,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "divso",   XO(31,363,1,0), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-{ "divso.",  XO(31,363,1,1), XO_MASK,	POWER|M601,	{ RT, RA, RB } },
-
-{ "tlbia",   X(31,370),	0xffffffff,	PPC,		{ 0 } },
-
-{ "mftbu",   XSPR(31,371,269), XSPR_MASK, PPC,		{ RT } },
-{ "mftb",    X(31,371),	X_MASK,		PPC,		{ RT, TBR } },
-
-{ "lwaux",   X(31,373),	X_MASK,		PPC|B64,	{ RT, RAL, RB } },
-
-{ "lhaux",   X(31,375),	X_MASK,		PPC|POWER,	{ RT, RAL, RB } },
-
-{ "sthx",    X(31,407),	X_MASK,		PPC|POWER,	{ RS, RA, RB } },
-
-{ "lfqx",    X(31,791),	X_MASK,		POWER2,		{ FRT, RA, RB } },
-
-{ "lfqux",   X(31,823),	X_MASK,		POWER2,		{ FRT, RA, RB } },
-
-{ "stfqx",   X(31,919),	X_MASK,		POWER2,		{ FRS, RA, RB } },
-
-{ "stfqux",  X(31,951),	X_MASK,		POWER2,		{ FRS, RA, RB } },
-
-{ "orc",     XRC(31,412,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "orc.",    XRC(31,412,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "sradi",   XS(31,413,0), XS_MASK,	PPC|B64,	{ RA, RS, SH6 } },
-{ "sradi.",  XS(31,413,1), XS_MASK,	PPC|B64,	{ RA, RS, SH6 } },
-
-{ "slbie",   X(31,434),	XRTRA_MASK,	PPC|B64,	{ RB } },
-
-{ "ecowx",   X(31,438),	X_MASK,		PPC,		{ RT, RA, RB } },
-
-{ "sthux",   X(31,439),	X_MASK,		PPC|POWER,	{ RS, RAS, RB } },
-
-{ "mr",	     XRC(31,444,0), X_MASK,	PPC|POWER,	{ RA, RS, RBS } },
-{ "or",      XRC(31,444,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "mr.",     XRC(31,444,1), X_MASK,	PPC|POWER,	{ RA, RS, RBS } },
-{ "or.",     XRC(31,444,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "mtdcr",   X(31,451),	X_MASK,		PPC,		{ SPR, RS } },
-
-{ "divdu",   XO(31,457,0,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divdu.",  XO(31,457,0,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divduo",  XO(31,457,1,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divduo.", XO(31,457,1,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-
-{ "divwu",   XO(31,459,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divwu.",  XO(31,459,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divwuo",  XO(31,459,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divwuo.", XO(31,459,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-
-{ "mtmq",    XSPR(31,467,0), XSPR_MASK,	POWER|M601,	{ RS } },
-{ "mtxer",   XSPR(31,467,1), XSPR_MASK,	PPC|POWER,	{ RS } },
-{ "mtlr",    XSPR(31,467,8), XSPR_MASK,	PPC|POWER,	{ RS } },
-{ "mtctr",   XSPR(31,467,9), XSPR_MASK,	PPC|POWER,	{ RS } },
-{ "mttid",   XSPR(31,467,17), XSPR_MASK, POWER,		{ RS } },
-{ "mtdsisr", XSPR(31,467,18), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtdar",   XSPR(31,467,19), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtrtcu",  XSPR(31,467,20), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtrtcl",  XSPR(31,467,21), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtdec",   XSPR(31,467,22), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtsdr0",  XSPR(31,467,24), XSPR_MASK, POWER,		{ RS } },
-{ "mtsdr1",  XSPR(31,467,25), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtsrr0",  XSPR(31,467,26), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtsrr1",  XSPR(31,467,27), XSPR_MASK, PPC|POWER,	{ RS } },
-{ "mtsprg",  XSPR(31,467,272), XSPRG_MASK, PPC,		{ SPRG, RS } },
-{ "mtasr",   XSPR(31,467,280), XSPR_MASK, PPC|B64,	{ RS } },
-{ "mtear",   XSPR(31,467,282), XSPR_MASK, PPC,		{ RS } },
-{ "mttbl",   XSPR(31,467,284), XSPR_MASK, PPC,		{ RS } },
-{ "mttbu",   XSPR(31,467,285), XSPR_MASK, PPC,		{ RS } },
-{ "mtibatu", XSPR(31,467,528), XSPRBAT_MASK, PPC,	{ SPRBAT, RS } },
-{ "mtibatl", XSPR(31,467,529), XSPRBAT_MASK, PPC,	{ SPRBAT, RS } },
-{ "mtdbatu", XSPR(31,467,536), XSPRBAT_MASK, PPC,	{ SPRBAT, RS } },
-{ "mtdbatl", XSPR(31,467,537), XSPRBAT_MASK, PPC,	{ SPRBAT, RS } },
-{ "mtspr",   X(31,467),	X_MASK,		PPC|POWER,	{ SPR, RS } },
-
-{ "dcbi",    X(31,470),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "nand",    XRC(31,476,0), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-{ "nand.",   XRC(31,476,1), X_MASK,	PPC|POWER,	{ RA, RS, RB } },
-
-{ "nabs",    XO(31,488,0,0), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "nabs.",   XO(31,488,0,1), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "nabso",   XO(31,488,1,0), XORB_MASK, POWER|M601,	{ RT, RA } },
-{ "nabso.",  XO(31,488,1,1), XORB_MASK, POWER|M601,	{ RT, RA } },
-
-{ "divd",    XO(31,489,0,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divd.",   XO(31,489,0,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divdo",   XO(31,489,1,0), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-{ "divdo.",  XO(31,489,1,1), XO_MASK,	PPC|B64,	{ RT, RA, RB } },
-
-{ "divw",    XO(31,491,0,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divw.",   XO(31,491,0,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divwo",   XO(31,491,1,0), XO_MASK,	PPC,		{ RT, RA, RB } },
-{ "divwo.",  XO(31,491,1,1), XO_MASK,	PPC,		{ RT, RA, RB } },
-
-{ "slbia",   X(31,498),	0xffffffff,	PPC|B64,	{ 0 } },
-
-{ "cli",     X(31,502), XRB_MASK,	POWER,		{ RT, RA } },
-
-{ "mcrxr",   X(31,512),	XRARB_MASK|(3<<21), PPC|POWER,	{ BF } },
-
-{ "clcs",    X(31,531), XRB_MASK,	POWER|M601,	{ RT, RA } },
-
-{ "lswx",    X(31,533),	X_MASK,		PPC,		{ RT, RA, RB } },
-{ "lsx",     X(31,533),	X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "lwbrx",   X(31,534),	X_MASK,		PPC,		{ RT, RA, RB } },
-{ "lbrx",    X(31,534),	X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "lfsx",    X(31,535),	X_MASK,		PPC|POWER,	{ FRT, RA, RB } },
-
-{ "srw",     XRC(31,536,0), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sr",      XRC(31,536,0), X_MASK,	POWER,		{ RA, RS, RB } },
-{ "srw.",    XRC(31,536,1), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sr.",     XRC(31,536,1), X_MASK,	POWER,		{ RA, RS, RB } },
-
-{ "rrib",    XRC(31,537,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "rrib.",   XRC(31,537,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "srd",     XRC(31,539,0), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-{ "srd.",    XRC(31,539,1), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-
-{ "maskir",  XRC(31,541,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "maskir.", XRC(31,541,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "tlbsync", X(31,566),	0xffffffff,	PPC,		{ 0 } },
-
-{ "lfsux",   X(31,567),	X_MASK,		PPC|POWER,	{ FRT, RAS, RB } },
-
-{ "mfsr",    X(31,595),	XRB_MASK|(1<<20), PPC|POWER|B32, { RT, SR } },
-
-{ "lswi",    X(31,597),	X_MASK,		PPC,		{ RT, RA, NB } },
-{ "lsi",     X(31,597),	X_MASK,		POWER,		{ RT, RA, NB } },
-
-{ "sync",    X(31,598), 0xffffffff,	PPC,		{ 0 } },
-{ "dcs",     X(31,598), 0xffffffff,	POWER,		{ 0 } },
-
-{ "lfdx",    X(31,599), X_MASK,		PPC|POWER,	{ FRT, RA, RB } },
-
-{ "mfsri",   X(31,627), X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "dclst",   X(31,630), XRB_MASK,	POWER,		{ RS, RA } },
-
-{ "lfdux",   X(31,631), X_MASK,		PPC|POWER,	{ FRT, RAS, RB } },
-
-{ "mfsrin",  X(31,659), XRA_MASK,	PPC|B32,	{ RT, RB } },
-
-{ "stswx",   X(31,661), X_MASK,		PPC,		{ RS, RA, RB } },
-{ "stsx",    X(31,661), X_MASK,		POWER,		{ RS, RA, RB } },
-
-{ "stwbrx",  X(31,662), X_MASK,		PPC,		{ RS, RA, RB } },
-{ "stbrx",   X(31,662), X_MASK,		POWER,		{ RS, RA, RB } },
-
-{ "stfsx",   X(31,663), X_MASK,		PPC|POWER,	{ FRS, RA, RB } },
-
-{ "srq",     XRC(31,664,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "srq.",    XRC(31,664,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "sre",     XRC(31,665,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sre.",    XRC(31,665,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "stfsux",  X(31,695),	X_MASK,		PPC|POWER,	{ FRS, RAS, RB } },
-
-{ "sriq",    XRC(31,696,0), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-{ "sriq.",   XRC(31,696,1), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-
-{ "stswi",   X(31,725),	X_MASK,		PPC,		{ RS, RA, NB } },
-{ "stsi",    X(31,725),	X_MASK,		POWER,		{ RS, RA, NB } },
-
-{ "stfdx",   X(31,727),	X_MASK,		PPC|POWER,	{ FRS, RA, RB } },
-
-{ "srlq",    XRC(31,728,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "srlq.",   XRC(31,728,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "sreq",    XRC(31,729,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sreq.",   XRC(31,729,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "stfdux",  X(31,759),	X_MASK,		PPC|POWER,	{ FRS, RAS, RB } },
-
-{ "srliq",   XRC(31,760,0), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-{ "srliq.",  XRC(31,760,1), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-
-{ "lhbrx",   X(31,790),	X_MASK,		PPC|POWER,	{ RT, RA, RB } },
-
-{ "sraw",    XRC(31,792,0), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sra",     XRC(31,792,0), X_MASK,	POWER,		{ RA, RS, RB } },
-{ "sraw.",   XRC(31,792,1), X_MASK,	PPC,		{ RA, RS, RB } },
-{ "sra.",    XRC(31,792,1), X_MASK,	POWER,		{ RA, RS, RB } },
-
-{ "srad",    XRC(31,794,0), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-{ "srad.",   XRC(31,794,1), X_MASK,	PPC|B64,	{ RA, RS, RB } },
-
-{ "rac",     X(31,818),	X_MASK,		POWER,		{ RT, RA, RB } },
-
-{ "srawi",   XRC(31,824,0), X_MASK,	PPC,		{ RA, RS, SH } },
-{ "srai",    XRC(31,824,0), X_MASK,	POWER,		{ RA, RS, SH } },
-{ "srawi.",  XRC(31,824,1), X_MASK,	PPC,		{ RA, RS, SH } },
-{ "srai.",   XRC(31,824,1), X_MASK,	POWER,		{ RA, RS, SH } },
-
-{ "eieio",   X(31,854),	0xffffffff,	PPC,		{ 0 } },
-
-{ "sthbrx",  X(31,918),	X_MASK,		PPC|POWER,	{ RS, RA, RB } },
-
-{ "sraq",    XRC(31,920,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "sraq.",   XRC(31,920,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "srea",    XRC(31,921,0), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-{ "srea.",   XRC(31,921,1), X_MASK,	POWER|M601,	{ RA, RS, RB } },
-
-{ "extsh",   XRC(31,922,0), XRB_MASK,	PPC,		{ RA, RS } },
-{ "exts",    XRC(31,922,0), XRB_MASK,	POWER,		{ RA, RS } },
-{ "extsh.",  XRC(31,922,1), XRB_MASK,	PPC,		{ RA, RS } },
-{ "exts.",   XRC(31,922,1), XRB_MASK,	POWER,		{ RA, RS } },
-
-{ "sraiq",   XRC(31,952,0), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-{ "sraiq.",  XRC(31,952,1), X_MASK,	POWER|M601,	{ RA, RS, SH } },
-
-{ "extsb",   XRC(31,954,0), XRB_MASK,	PPC,		{ RA, RS} },
-{ "extsb.",  XRC(31,954,1), XRB_MASK,	PPC,		{ RA, RS} },
-
-{ "iccci",   X(31,966),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "icbi",    X(31,982),	XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "stfiwx",  X(31,983),	X_MASK,		PPC,		{ FRS, RA, RB } },
-
-{ "extsw",   XRC(31,986,0), XRB_MASK,	PPC,		{ RA, RS } },
-{ "extsw.",  XRC(31,986,1), XRB_MASK,	PPC,		{ RA, RS } },
-
-{ "dcbz",    X(31,1014), XRT_MASK,	PPC,		{ RA, RB } },
-{ "dclz",    X(31,1014), XRT_MASK,	PPC,		{ RA, RB } },
-
-{ "lwz",     OP(32),	OP_MASK,	PPC,		{ RT, D, RA } },
-{ "l",	     OP(32),	OP_MASK,	POWER,		{ RT, D, RA } },
-
-{ "lwzu",    OP(33),	OP_MASK,	PPC,		{ RT, D, RAL } },
-{ "lu",      OP(33),	OP_MASK,	POWER,		{ RT, D, RA } },
-
-{ "lbz",     OP(34),	OP_MASK,	PPC|POWER,	{ RT, D, RA } },
-
-{ "lbzu",    OP(35),	OP_MASK,	PPC|POWER,	{ RT, D, RAL } },
-
-{ "stw",     OP(36),	OP_MASK,	PPC,		{ RS, D, RA } },
-{ "st",      OP(36),	OP_MASK,	POWER,		{ RS, D, RA } },
-
-{ "stwu",    OP(37),	OP_MASK,	PPC,		{ RS, D, RAS } },
-{ "stu",     OP(37),	OP_MASK,	POWER,		{ RS, D, RA } },
-
-{ "stb",     OP(38),	OP_MASK,	PPC|POWER,	{ RS, D, RA } },
-
-{ "stbu",    OP(39),	OP_MASK,	PPC|POWER,	{ RS, D, RAS } },
-
-{ "lhz",     OP(40),	OP_MASK,	PPC|POWER,	{ RT, D, RA } },
-
-{ "lhzu",    OP(41),	OP_MASK,	PPC|POWER,	{ RT, D, RAL } },
-
-{ "lha",     OP(42),	OP_MASK,	PPC|POWER,	{ RT, D, RA } },
-
-{ "lhau",    OP(43),	OP_MASK,	PPC|POWER,	{ RT, D, RAL } },
-
-{ "sth",     OP(44),	OP_MASK,	PPC|POWER,	{ RS, D, RA } },
-
-{ "sthu",    OP(45),	OP_MASK,	PPC|POWER,	{ RS, D, RAS } },
-
-{ "lmw",     OP(46),	OP_MASK,	PPC,		{ RT, D, RAM } },
-{ "lm",      OP(46),	OP_MASK,	POWER,		{ RT, D, RA } },
-
-{ "stmw",    OP(47),	OP_MASK,	PPC,		{ RS, D, RA } },
-{ "stm",     OP(47),	OP_MASK,	POWER,		{ RS, D, RA } },
-
-{ "lfs",     OP(48),	OP_MASK,	PPC|POWER,	{ FRT, D, RA } },
-
-{ "lfsu",    OP(49),	OP_MASK,	PPC|POWER,	{ FRT, D, RAS } },
-
-{ "lfd",     OP(50),	OP_MASK,	PPC|POWER,	{ FRT, D, RA } },
-
-{ "lfdu",    OP(51),	OP_MASK,	PPC|POWER,	{ FRT, D, RAS } },
-
-{ "stfs",    OP(52),	OP_MASK,	PPC|POWER,	{ FRS, D, RA } },
-
-{ "stfsu",   OP(53),	OP_MASK,	PPC|POWER,	{ FRS, D, RAS } },
-
-{ "stfd",    OP(54),	OP_MASK,	PPC|POWER,	{ FRS, D, RA } },
-
-{ "stfdu",   OP(55),	OP_MASK,	PPC|POWER,	{ FRS, D, RAS } },
-
-{ "lfq",     OP(56),	OP_MASK,	POWER2,		{ FRT, D, RA } },
-
-{ "lfqu",    OP(57),	OP_MASK,	POWER2,		{ FRT, D, RA } },
-
-{ "ld",      DSO(58,0),	DS_MASK,	PPC|B64,	{ RT, DS, RA } },
-
-{ "ldu",     DSO(58,1), DS_MASK,	PPC|B64,	{ RT, DS, RAL } },
-
-{ "lwa",     DSO(58,2), DS_MASK,	PPC|B64,	{ RT, DS, RA } },
-
-{ "fdivs",   A(59,18,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fdivs.",  A(59,18,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-
-{ "fsubs",   A(59,20,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fsubs.",  A(59,20,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-
-{ "fadds",   A(59,21,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fadds.",  A(59,21,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-
-{ "fsqrts",  A(59,22,0), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-{ "fsqrts.", A(59,22,1), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-
-{ "fres",    A(59,24,0), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-{ "fres.",   A(59,24,1), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-
-{ "fmuls",   A(59,25,0), AFRB_MASK,	PPC,		{ FRT, FRA, FRC } },
-{ "fmuls.",  A(59,25,1), AFRB_MASK,	PPC,		{ FRT, FRA, FRC } },
-
-{ "fmsubs",  A(59,28,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fmsubs.", A(59,28,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-
-{ "fmadds",  A(59,29,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fmadds.", A(59,29,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-
-{ "fnmsubs", A(59,30,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnmsubs.",A(59,30,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-
-{ "fnmadds", A(59,31,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnmadds.",A(59,31,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-
-{ "stfq",    OP(60),	OP_MASK,	POWER2,		{ FRS, D, RA } },
-
-{ "stfqu",   OP(61),	OP_MASK,	POWER2,		{ FRS, D, RA } },
-
-{ "std",     DSO(62,0),	DS_MASK,	PPC|B64,	{ RS, DS, RA } },
-
-{ "stdu",    DSO(62,1),	DS_MASK,	PPC|B64,	{ RS, DS, RAS } },
-
-{ "fcmpu",   X(63,0),	X_MASK|(3<<21),	PPC|POWER,	{ BF, FRA, FRB } },
-
-{ "frsp",    XRC(63,12,0), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-{ "frsp.",   XRC(63,12,1), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-
-{ "fctiw",   XRC(63,14,0), XRA_MASK,	PPC,		{ FRT, FRB } },
-{ "fcir",    XRC(63,14,0), XRA_MASK,	POWER2,		{ FRT, FRB } },
-{ "fctiw.",  XRC(63,14,1), XRA_MASK,	PPC,		{ FRT, FRB } },
-{ "fcir.",   XRC(63,14,1), XRA_MASK,	POWER2,		{ FRT, FRB } },
-
-{ "fctiwz",  XRC(63,15,0), XRA_MASK,	PPC,		{ FRT, FRB } },
-{ "fcirz",   XRC(63,15,0), XRA_MASK,	POWER2,		{ FRT, FRB } },
-{ "fctiwz.", XRC(63,15,1), XRA_MASK,	PPC,		{ FRT, FRB } },
-{ "fcirz.",  XRC(63,15,1), XRA_MASK,	POWER2,		{ FRT, FRB } },
-
-{ "fdiv",    A(63,18,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fd",      A(63,18,0), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-{ "fdiv.",   A(63,18,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fd.",     A(63,18,1), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-
-{ "fsub",    A(63,20,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fs",      A(63,20,0), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-{ "fsub.",   A(63,20,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fs.",     A(63,20,1), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-
-{ "fadd",    A(63,21,0), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fa",      A(63,21,0), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-{ "fadd.",   A(63,21,1), AFRC_MASK,	PPC,		{ FRT, FRA, FRB } },
-{ "fa.",     A(63,21,1), AFRC_MASK,	POWER,		{ FRT, FRA, FRB } },
-
-{ "fsqrt",   A(63,22,0), AFRAFRC_MASK,	PPC|POWER2,	{ FRT, FRB } },
-{ "fsqrt.",  A(63,22,1), AFRAFRC_MASK,	PPC|POWER2,	{ FRT, FRB } },
-
-{ "fsel",    A(63,23,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fsel.",   A(63,23,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-
-{ "fmul",    A(63,25,0), AFRB_MASK,	PPC,		{ FRT, FRA, FRC } },
-{ "fm",      A(63,25,0), AFRB_MASK,	POWER,		{ FRT, FRA, FRC } },
-{ "fmul.",   A(63,25,1), AFRB_MASK,	PPC,		{ FRT, FRA, FRC } },
-{ "fm.",     A(63,25,1), AFRB_MASK,	POWER,		{ FRT, FRA, FRC } },
-
-{ "frsqrte", A(63,26,0), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-{ "frsqrte.",A(63,26,1), AFRAFRC_MASK,	PPC,		{ FRT, FRB } },
-
-{ "fmsub",   A(63,28,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fms",     A(63,28,0), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-{ "fmsub.",  A(63,28,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fms.",    A(63,28,1), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-
-{ "fmadd",   A(63,29,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fma",     A(63,29,0), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-{ "fmadd.",  A(63,29,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fma.",    A(63,29,1), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-
-{ "fnmsub",  A(63,30,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnms",    A(63,30,0), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-{ "fnmsub.", A(63,30,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnms.",   A(63,30,1), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-
-{ "fnmadd",  A(63,31,0), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnma",    A(63,31,0), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-{ "fnmadd.", A(63,31,1), A_MASK,	PPC,		{ FRT,FRA,FRC,FRB } },
-{ "fnma.",   A(63,31,1), A_MASK,	POWER,		{ FRT,FRA,FRC,FRB } },
-
-{ "fcmpo",   X(63,30),	X_MASK|(3<<21),	PPC|POWER,	{ BF, FRA, FRB } },
-
-{ "mtfsb1",  XRC(63,38,0), XRARB_MASK,	PPC|POWER,	{ BT } },
-{ "mtfsb1.", XRC(63,38,1), XRARB_MASK,	PPC|POWER,	{ BT } },
-
-{ "fneg",    XRC(63,40,0), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-{ "fneg.",   XRC(63,40,1), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-
-{ "mcrfs",   X(63,64),	XRB_MASK|(3<<21)|(3<<16), PPC|POWER, { BF, BFA } },
-
-{ "mtfsb0",  XRC(63,70,0), XRARB_MASK,	PPC|POWER,	{ BT } },
-{ "mtfsb0.", XRC(63,70,1), XRARB_MASK,	PPC|POWER,	{ BT } },
-
-{ "fmr",     XRC(63,72,0), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-{ "fmr.",    XRC(63,72,1), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-
-{ "mtfsfi",  XRC(63,134,0), XRA_MASK|(3<<21)|(1<<11), PPC|POWER, { BF, U } },
-{ "mtfsfi.", XRC(63,134,1), XRA_MASK|(3<<21)|(1<<11), PPC|POWER, { BF, U } },
-
-{ "fnabs",   XRC(63,136,0), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-{ "fnabs.",  XRC(63,136,1), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-
-{ "fabs",    XRC(63,264,0), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-{ "fabs.",   XRC(63,264,1), XRA_MASK,	PPC|POWER,	{ FRT, FRB } },
-
-{ "mffs",    XRC(63,583,0), XRARB_MASK,	PPC|POWER,	{ FRT } },
-{ "mffs.",   XRC(63,583,1), XRARB_MASK,	PPC|POWER,	{ FRT } },
-
-{ "mtfsf",   XFL(63,711,0), XFL_MASK,	PPC|POWER,	{ FLM, FRB } },
-{ "mtfsf.",  XFL(63,711,1), XFL_MASK,	PPC|POWER,	{ FLM, FRB } },
-
-{ "fctid",   XRC(63,814,0), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-{ "fctid.",  XRC(63,814,1), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-
-{ "fctidz",  XRC(63,815,0), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-{ "fctidz.", XRC(63,815,1), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-
-{ "fcfid",   XRC(63,846,0), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-{ "fcfid.",  XRC(63,846,1), XRA_MASK,	PPC|B64,	{ FRT, FRB } },
-
-};
-
-const int powerpc_num_opcodes = ARRAY_SIZE(powerpc_opcodes);
-
-/* The macro table.  This is only used by the assembler.  */
-
-const struct powerpc_macro powerpc_macros[] = {
-{ "extldi",  4,   PPC|B64,	"rldicr %0,%1,%3,(%2)-1" },
-{ "extldi.", 4,   PPC|B64,	"rldicr. %0,%1,%3,(%2)-1" },
-{ "extrdi",  4,   PPC|B64,	"rldicl %0,%1,(%2)+(%3),64-(%2)" },
-{ "extrdi.", 4,   PPC|B64,	"rldicl. %0,%1,(%2)+(%3),64-(%2)" },
-{ "insrdi",  4,   PPC|B64,	"rldimi %0,%1,64-((%2)+(%3)),%3" },
-{ "insrdi.", 4,   PPC|B64,	"rldimi. %0,%1,64-((%2)+(%3)),%3" },
-{ "rotrdi",  3,   PPC|B64,	"rldicl %0,%1,64-(%2),0" },
-{ "rotrdi.", 3,   PPC|B64,	"rldicl. %0,%1,64-(%2),0" },
-{ "sldi",    3,   PPC|B64,	"rldicr %0,%1,%2,63-(%2)" },
-{ "sldi.",   3,   PPC|B64,	"rldicr. %0,%1,%2,63-(%2)" },
-{ "srdi",    3,   PPC|B64,	"rldicl %0,%1,64-(%2),%2" },
-{ "srdi.",   3,   PPC|B64,	"rldicl. %0,%1,64-(%2),%2" },
-{ "clrrdi",  3,   PPC|B64,	"rldicr %0,%1,0,63-(%2)" },
-{ "clrrdi.", 3,   PPC|B64,	"rldicr. %0,%1,0,63-(%2)" },
-{ "clrlsldi",4,   PPC|B64,	"rldic %0,%1,%3,(%2)-(%3)" },
-{ "clrlsldi.",4,  PPC|B64,	"rldic. %0,%1,%3,(%2)-(%3)" },
-
-{ "extlwi",  4,   PPC,		"rlwinm %0,%1,%3,0,(%2)-1" },
-{ "extlwi.", 4,   PPC,		"rlwinm. %0,%1,%3,0,(%2)-1" },
-{ "extrwi",  4,   PPC,		"rlwinm %0,%1,(%2)+(%3),32-(%2),31" },
-{ "extrwi.", 4,   PPC,		"rlwinm. %0,%1,(%2)+(%3),32-(%2),31" },
-{ "inslwi",  4,   PPC,		"rlwimi %0,%1,32-(%3),%3,(%2)+(%3)-1" },
-{ "inslwi.", 4,   PPC,		"rlwimi. %0,%1,32-(%3),%3,(%2)+(%3)-1" },
-{ "insrwi",  4,   PPC,		"rlwimi %0,%1,32-((%2)+(%3)),%3,(%2)+(%3)-1" },
-{ "insrwi.", 4,   PPC,		"rlwimi. %0,%1,32-((%2)+(%3)),%3,(%2)+(%3)-1"},
-{ "rotrwi",  3,   PPC,		"rlwinm %0,%1,32-(%2),0,31" },
-{ "rotrwi.", 3,   PPC,		"rlwinm. %0,%1,32-(%2),0,31" },
-{ "slwi",    3,   PPC,		"rlwinm %0,%1,%2,0,31-(%2)" },
-{ "sli",     3,   POWER,	"rlinm %0,%1,%2,0,31-(%2)" },
-{ "slwi.",   3,   PPC,		"rlwinm. %0,%1,%2,0,31-(%2)" },
-{ "sli.",    3,   POWER,	"rlinm. %0,%1,%2,0,31-(%2)" },
-{ "srwi",    3,   PPC,		"rlwinm %0,%1,32-(%2),%2,31" },
-{ "sri",     3,   POWER,	"rlinm %0,%1,32-(%2),%2,31" },
-{ "srwi.",   3,   PPC,		"rlwinm. %0,%1,32-(%2),%2,31" },
-{ "sri.",    3,   POWER,	"rlinm. %0,%1,32-(%2),%2,31" },
-{ "clrrwi",  3,   PPC,		"rlwinm %0,%1,0,0,31-(%2)" },
-{ "clrrwi.", 3,   PPC,		"rlwinm. %0,%1,0,0,31-(%2)" },
-{ "clrlslwi",4,   PPC,		"rlwinm %0,%1,%3,(%2)-(%3),31-(%3)" },
-{ "clrlslwi.",4,  PPC,		"rlwinm. %0,%1,%3,(%2)-(%3),31-(%3)" },
-
-};
-
-const int powerpc_num_macros = ARRAY_SIZE(powerpc_macros);
diff --git a/arch/ppc/xmon/ppc.h b/arch/ppc/xmon/ppc.h
deleted file mode 100644
index 2345ecba1fe9..000000000000
--- a/arch/ppc/xmon/ppc.h
+++ /dev/null
@@ -1,240 +0,0 @@
-/* ppc.h -- Header file for PowerPC opcode table
-   Copyright 1994 Free Software Foundation, Inc.
-   Written by Ian Lance Taylor, Cygnus Support
-
-This file is part of GDB, GAS, and the GNU binutils.
-
-GDB, GAS, and the GNU binutils are free software; you can redistribute
-them and/or modify them under the terms of the GNU General Public
-License as published by the Free Software Foundation; either version
-1, or (at your option) any later version.
-
-GDB, GAS, and the GNU binutils are distributed in the hope that they
-will be useful, but WITHOUT ANY WARRANTY; without even the implied
-warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
-the GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this file; see the file COPYING.  If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#ifndef PPC_H
-#define PPC_H
-
-/* The opcode table is an array of struct powerpc_opcode.  */
-
-struct powerpc_opcode
-{
-  /* The opcode name.  */
-  const char *name;
-
-  /* The opcode itself.  Those bits which will be filled in with
-     operands are zeroes.  */
-  unsigned long opcode;
-
-  /* The opcode mask.  This is used by the disassembler.  This is a
-     mask containing ones indicating those bits which must match the
-     opcode field, and zeroes indicating those bits which need not
-     match (and are presumably filled in by operands).  */
-  unsigned long mask;
-
-  /* One bit flags for the opcode.  These are used to indicate which
-     specific processors support the instructions.  The defined values
-     are listed below.  */
-  unsigned long flags;
-
-  /* An array of operand codes.  Each code is an index into the
-     operand table.  They appear in the order which the operands must
-     appear in assembly code, and are terminated by a zero.  */
-  unsigned char operands[8];
-};
-
-/* The table itself is sorted by major opcode number, and is otherwise
-   in the order in which the disassembler should consider
-   instructions.  */
-extern const struct powerpc_opcode powerpc_opcodes[];
-extern const int powerpc_num_opcodes;
-
-/* Values defined for the flags field of a struct powerpc_opcode.  */
-
-/* Opcode is defined for the PowerPC architecture.  */
-#define PPC_OPCODE_PPC (01)
-
-/* Opcode is defined for the POWER (RS/6000) architecture.  */
-#define PPC_OPCODE_POWER (02)
-
-/* Opcode is defined for the POWER2 (Rios 2) architecture.  */
-#define PPC_OPCODE_POWER2 (04)
-
-/* Opcode is only defined on 32 bit architectures.  */
-#define PPC_OPCODE_32 (010)
-
-/* Opcode is only defined on 64 bit architectures.  */
-#define PPC_OPCODE_64 (020)
-
-/* Opcode is supported by the Motorola PowerPC 601 processor.  The 601
-   is assumed to support all PowerPC (PPC_OPCODE_PPC) instructions,
-   but it also supports many additional POWER instructions.  */
-#define PPC_OPCODE_601 (040)
-
-/* A macro to extract the major opcode from an instruction.  */
-#define PPC_OP(i) (((i) >> 26) & 0x3f)
-
-/* The operands table is an array of struct powerpc_operand.  */
-
-struct powerpc_operand
-{
-  /* The number of bits in the operand.  */
-  int bits;
-
-  /* How far the operand is left shifted in the instruction.  */
-  int shift;
-
-  /* Insertion function.  This is used by the assembler.  To insert an
-     operand value into an instruction, check this field.
-
-     If it is NULL, execute
-         i |= (op & ((1 << o->bits) - 1)) << o->shift;
-     (i is the instruction which we are filling in, o is a pointer to
-     this structure, and op is the opcode value; this assumes twos
-     complement arithmetic).
-
-     If this field is not NULL, then simply call it with the
-     instruction and the operand value.  It will return the new value
-     of the instruction.  If the ERRMSG argument is not NULL, then if
-     the operand value is illegal, *ERRMSG will be set to a warning
-     string (the operand will be inserted in any case).  If the
-     operand value is legal, *ERRMSG will be unchanged (most operands
-     can accept any value).  */
-  unsigned long (*insert) PARAMS ((unsigned long instruction, long op,
-				   const char **errmsg));
-
-  /* Extraction function.  This is used by the disassembler.  To
-     extract this operand type from an instruction, check this field.
-
-     If it is NULL, compute
-         op = ((i) >> o->shift) & ((1 << o->bits) - 1);
-	 if ((o->flags & PPC_OPERAND_SIGNED) != 0
-	     && (op & (1 << (o->bits - 1))) != 0)
-	   op -= 1 << o->bits;
-     (i is the instruction, o is a pointer to this structure, and op
-     is the result; this assumes twos complement arithmetic).
-
-     If this field is not NULL, then simply call it with the
-     instruction value.  It will return the value of the operand.  If
-     the INVALID argument is not NULL, *INVALID will be set to
-     non-zero if this operand type can not actually be extracted from
-     this operand (i.e., the instruction does not match).  If the
-     operand is valid, *INVALID will not be changed.  */
-  long (*extract) PARAMS ((unsigned long instruction, int *invalid));
-
-  /* One bit syntax flags.  */
-  unsigned long flags;
-};
-
-/* Elements in the table are retrieved by indexing with values from
-   the operands field of the powerpc_opcodes table.  */
-
-extern const struct powerpc_operand powerpc_operands[];
-
-/* Values defined for the flags field of a struct powerpc_operand.  */
-
-/* This operand takes signed values.  */
-#define PPC_OPERAND_SIGNED (01)
-
-/* This operand takes signed values, but also accepts a full positive
-   range of values when running in 32 bit mode.  That is, if bits is
-   16, it takes any value from -0x8000 to 0xffff.  In 64 bit mode,
-   this flag is ignored.  */
-#define PPC_OPERAND_SIGNOPT (02)
-
-/* This operand does not actually exist in the assembler input.  This
-   is used to support extended mnemonics such as mr, for which two
-   operands fields are identical.  The assembler should call the
-   insert function with any op value.  The disassembler should call
-   the extract function, ignore the return value, and check the value
-   placed in the valid argument.  */
-#define PPC_OPERAND_FAKE (04)
-
-/* The next operand should be wrapped in parentheses rather than
-   separated from this one by a comma.  This is used for the load and
-   store instructions which want their operands to look like
-       reg,displacement(reg)
-   */
-#define PPC_OPERAND_PARENS (010)
-
-/* This operand may use the symbolic names for the CR fields, which
-   are
-       lt  0	gt  1	eq  2	so  3	un  3
-       cr0 0	cr1 1	cr2 2	cr3 3
-       cr4 4	cr5 5	cr6 6	cr7 7
-   These may be combined arithmetically, as in cr2*4+gt.  These are
-   only supported on the PowerPC, not the POWER.  */
-#define PPC_OPERAND_CR (020)
-
-/* This operand names a register.  The disassembler uses this to print
-   register names with a leading 'r'.  */
-#define PPC_OPERAND_GPR (040)
-
-/* This operand names a floating point register.  The disassembler
-   prints these with a leading 'f'.  */
-#define PPC_OPERAND_FPR (0100)
-
-/* This operand is a relative branch displacement.  The disassembler
-   prints these symbolically if possible.  */
-#define PPC_OPERAND_RELATIVE (0200)
-
-/* This operand is an absolute branch address.  The disassembler
-   prints these symbolically if possible.  */
-#define PPC_OPERAND_ABSOLUTE (0400)
-
-/* This operand is optional, and is zero if omitted.  This is used for
-   the optional BF and L fields in the comparison instructions.  The
-   assembler must count the number of operands remaining on the line,
-   and the number of operands remaining for the opcode, and decide
-   whether this operand is present or not.  The disassembler should
-   print this operand out only if it is not zero.  */
-#define PPC_OPERAND_OPTIONAL (01000)
-
-/* This flag is only used with PPC_OPERAND_OPTIONAL.  If this operand
-   is omitted, then for the next operand use this operand value plus
-   1, ignoring the next operand field for the opcode.  This wretched
-   hack is needed because the Power rotate instructions can take
-   either 4 or 5 operands.  The disassembler should print this operand
-   out regardless of the PPC_OPERAND_OPTIONAL field.  */
-#define PPC_OPERAND_NEXT (02000)
-
-/* This operand should be regarded as a negative number for the
-   purposes of overflow checking (i.e., the normal most negative
-   number is disallowed and one more than the normal most positive
-   number is allowed).  This flag will only be set for a signed
-   operand.  */
-#define PPC_OPERAND_NEGATIVE (04000)
-
-/* The POWER and PowerPC assemblers use a few macros.  We keep them
-   with the operands table for simplicity.  The macro table is an
-   array of struct powerpc_macro.  */
-
-struct powerpc_macro
-{
-  /* The macro name.  */
-  const char *name;
-
-  /* The number of operands the macro takes.  */
-  unsigned int operands;
-
-  /* One bit flags for the opcode.  These are used to indicate which
-     specific processors support the instructions.  The values are the
-     same as those for the struct powerpc_opcode flags field.  */
-  unsigned long flags;
-
-  /* A format string to turn the macro into a normal instruction.
-     Each %N in the string is replaced with operand number N (zero
-     based).  */
-  const char *format;
-};
-
-extern const struct powerpc_macro powerpc_macros[];
-extern const int powerpc_num_macros;
-
-#endif /* PPC_H */
diff --git a/arch/ppc/xmon/privinst.h b/arch/ppc/xmon/privinst.h
deleted file mode 100644
index c492a35687bd..000000000000
--- a/arch/ppc/xmon/privinst.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- */
-
-#define GETREG(reg)		\
-    static inline int get_ ## reg (void)	\
-	{ int ret; asm volatile ("mf" #reg " %0" : "=r" (ret) :); return ret; }
-
-#define SETREG(reg)		\
-    static inline void set_ ## reg (int val)	\
-	{ asm volatile ("mt" #reg " %0" : : "r" (val)); }
-
-GETREG(msr)
-SETREG(msr)
-GETREG(cr)
-
-#define GSETSPR(n, name)	\
-    static inline int get_ ## name (void) \
-	{ int ret; asm volatile ("mfspr %0," #n : "=r" (ret) : ); return ret; } \
-    static inline void set_ ## name (int val) \
-	{ asm volatile ("mtspr " #n ",%0" : : "r" (val)); }
-
-GSETSPR(0, mq)
-GSETSPR(1, xer)
-GSETSPR(4, rtcu)
-GSETSPR(5, rtcl)
-GSETSPR(8, lr)
-GSETSPR(9, ctr)
-GSETSPR(18, dsisr)
-GSETSPR(19, dar)
-GSETSPR(22, dec)
-GSETSPR(25, sdr1)
-GSETSPR(26, srr0)
-GSETSPR(27, srr1)
-GSETSPR(272, sprg0)
-GSETSPR(273, sprg1)
-GSETSPR(274, sprg2)
-GSETSPR(275, sprg3)
-GSETSPR(282, ear)
-GSETSPR(287, pvr)
-#ifndef CONFIG_8xx
-GSETSPR(528, bat0u)
-GSETSPR(529, bat0l)
-GSETSPR(530, bat1u)
-GSETSPR(531, bat1l)
-GSETSPR(532, bat2u)
-GSETSPR(533, bat2l)
-GSETSPR(534, bat3u)
-GSETSPR(535, bat3l)
-GSETSPR(1008, hid0)
-GSETSPR(1009, hid1)
-GSETSPR(1010, iabr)
-GSETSPR(1013, dabr)
-GSETSPR(1023, pir)
-#else
-GSETSPR(144, cmpa)
-GSETSPR(145, cmpb)
-GSETSPR(146, cmpc)
-GSETSPR(147, cmpd)
-GSETSPR(158, ictrl)
-#endif
-
-static inline int get_sr(int n)
-{
-    int ret;
-
-    asm (" mfsrin %0,%1" : "=r" (ret) : "r" (n << 28));
-    return ret;
-}
-
-static inline void set_sr(int n, int val)
-{
-    asm ("mtsrin %0,%1" : : "r" (val), "r" (n << 28));
-}
-
-static inline void store_inst(void *p)
-{
-    asm volatile ("dcbst 0,%0; sync; icbi 0,%0; isync" : : "r" (p));
-}
-
-static inline void cflush(void *p)
-{
-    asm volatile ("dcbf 0,%0; icbi 0,%0" : : "r" (p));
-}
-
-static inline void cinval(void *p)
-{
-    asm volatile ("dcbi 0,%0; icbi 0,%0" : : "r" (p));
-}
-
diff --git a/arch/ppc/xmon/setjmp.c b/arch/ppc/xmon/setjmp.c
deleted file mode 100644
index 28352bac2ae6..000000000000
--- a/arch/ppc/xmon/setjmp.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- *
- * NB this file must be compiled with -O2.
- */
-
-int
-xmon_setjmp(long *buf)
-{
-    asm ("mflr 0; stw 0,0(%0);"
-	 "stw 1,4(%0); stw 2,8(%0);"
-	 "mfcr 0; stw 0,12(%0);"
-	 "stmw 13,16(%0)"
-	 : : "r" (buf));
-    /* XXX should save fp regs as well */
-    return 0;
-}
-
-void
-xmon_longjmp(long *buf, int val)
-{
-    if (val == 0)
-	val = 1;
-    asm ("lmw 13,16(%0);"
-	 "lwz 0,12(%0); mtcrf 0x38,0;"
-	 "lwz 0,0(%0); lwz 1,4(%0); lwz 2,8(%0);"
-	 "mtlr 0; mr 3,%1"
-	 : : "r" (buf), "r" (val));
-}
diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c
deleted file mode 100644
index 9056fe58aaa1..000000000000
--- a/arch/ppc/xmon/start.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- */
-#include <linux/string.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/sysrq.h>
-#include <linux/bitops.h>
-#include <asm/xmon.h>
-#include <asm/errno.h>
-#include <asm/processor.h>
-#include <asm/delay.h>
-#include <asm/btext.h>
-#include <asm/ibm4xx.h>
-
-static volatile unsigned char *sccc, *sccd;
-unsigned int TXRDY, RXRDY, DLAB;
-static int xmon_expect(const char *str, unsigned int timeout);
-
-static int via_modem;
-
-#define TB_SPEED	25000000
-
-static inline unsigned int readtb(void)
-{
-	unsigned int ret;
-
-	asm volatile("mftb %0" : "=r" (ret) :);
-	return ret;
-}
-
-void buf_access(void)
-{
-	if (DLAB)
-		sccd[3] &= ~DLAB;	/* reset DLAB */
-}
-
-
-#ifdef CONFIG_MAGIC_SYSRQ
-static void sysrq_handle_xmon(int key, struct pt_regs *regs,
-			      struct tty_struct *tty)
-{
-	xmon(regs);
-}
-
-static struct sysrq_key_op sysrq_xmon_op =
-{
-	.handler =	sysrq_handle_xmon,
-	.help_msg =	"Xmon",
-	.action_msg =	"Entering xmon",
-};
-#endif
-
-void
-xmon_map_scc(void)
-{
-#if defined(CONFIG_405GP)
-	sccd = (volatile unsigned char *)0xef600300;
-#elif defined(CONFIG_440EP)
-	sccd = (volatile unsigned char *) ioremap(PPC440EP_UART0_ADDR, 8);
-#elif defined(CONFIG_440SP)
-	sccd = (volatile unsigned char *) ioremap64(PPC440SP_UART0_ADDR, 8);
-#elif defined(CONFIG_440SPE)
-	sccd = (volatile unsigned char *) ioremap64(PPC440SPE_UART0_ADDR, 8);
-#elif defined(CONFIG_44x)
-	/* This is the default for 44x platforms.  Any boards that have a
-	   different UART address need to be put in cases before this or the
-	   port will be mapped incorrectly */
-	sccd = (volatile unsigned char *) ioremap64(PPC440GP_UART0_ADDR, 8);
-#endif /* platform */
-
-#ifndef CONFIG_PPC_PREP
-	sccc = sccd + 5;
-	TXRDY = 0x20;
-	RXRDY = 1;
-	DLAB = 0x80;
-#endif
-
-	register_sysrq_key('x', &sysrq_xmon_op);
-}
-
-static int scc_initialized;
-
-void xmon_init_scc(void);
-
-int
-xmon_write(void *handle, void *ptr, int nb)
-{
-	char *p = ptr;
-	int i, c, ct;
-
-#ifdef CONFIG_SMP
-	static unsigned long xmon_write_lock;
-	int lock_wait = 1000000;
-	int locked;
-
-	while ((locked = test_and_set_bit(0, &xmon_write_lock)) != 0)
-		if (--lock_wait == 0)
-			break;
-#endif
-
-	if (!scc_initialized)
-		xmon_init_scc();
-	ct = 0;
-	for (i = 0; i < nb; ++i) {
-		while ((*sccc & TXRDY) == 0)
-			;
-		c = p[i];
-		if (c == '\n' && !ct) {
-			c = '\r';
-			ct = 1;
-			--i;
-		} else {
-			ct = 0;
-		}
-		buf_access();
-		*sccd = c;
-		eieio();
-	}
-
-#ifdef CONFIG_SMP
-	if (!locked)
-		clear_bit(0, &xmon_write_lock);
-#endif
-	return nb;
-}
-
-int xmon_wants_key;
-
-
-int
-xmon_read(void *handle, void *ptr, int nb)
-{
-    char *p = ptr;
-    int i;
-
-    if (!scc_initialized)
-	xmon_init_scc();
-    for (i = 0; i < nb; ++i) {
-	while ((*sccc & RXRDY) == 0)
-	    ;
-	buf_access();
-	*p++ = *sccd;
-    }
-    return i;
-}
-
-int
-xmon_read_poll(void)
-{
-	if ((*sccc & RXRDY) == 0) {
-		;
-		return -1;
-	}
-	buf_access();
-	return *sccd;
-}
-
-void
-xmon_init_scc(void)
-{
-	scc_initialized = 1;
-	if (via_modem) {
-		for (;;) {
-			xmon_write(NULL, "ATE1V1\r", 7);
-			if (xmon_expect("OK", 5)) {
-				xmon_write(NULL, "ATA\r", 4);
-				if (xmon_expect("CONNECT", 40))
-					break;
-			}
-			xmon_write(NULL, "+++", 3);
-			xmon_expect("OK", 3);
-		}
-	}
-}
-
-
-void *xmon_stdin;
-void *xmon_stdout;
-void *xmon_stderr;
-
-void
-xmon_init(int arg)
-{
-	xmon_map_scc();
-}
-
-int
-xmon_putc(int c, void *f)
-{
-    char ch = c;
-
-    if (c == '\n')
-	xmon_putc('\r', f);
-    return xmon_write(f, &ch, 1) == 1? c: -1;
-}
-
-int
-xmon_putchar(int c)
-{
-    return xmon_putc(c, xmon_stdout);
-}
-
-int
-xmon_fputs(char *str, void *f)
-{
-    int n = strlen(str);
-
-    return xmon_write(f, str, n) == n? 0: -1;
-}
-
-int
-xmon_readchar(void)
-{
-    char ch;
-
-    for (;;) {
-	switch (xmon_read(xmon_stdin, &ch, 1)) {
-	case 1:
-	    return ch;
-	case -1:
-	    xmon_printf("read(stdin) returned -1\r\n", 0, 0);
-	    return -1;
-	}
-    }
-}
-
-static char line[256];
-static char *lineptr;
-static int lineleft;
-
-int xmon_expect(const char *str, unsigned int timeout)
-{
-	int c;
-	unsigned int t0;
-
-	timeout *= TB_SPEED;
-	t0 = readtb();
-	do {
-		lineptr = line;
-		for (;;) {
-			c = xmon_read_poll();
-			if (c == -1) {
-				if (readtb() - t0 > timeout)
-					return 0;
-				continue;
-			}
-			if (c == '\n')
-				break;
-			if (c != '\r' && lineptr < &line[sizeof(line) - 1])
-				*lineptr++ = c;
-		}
-		*lineptr = 0;
-	} while (strstr(line, str) == NULL);
-	return 1;
-}
-
-int
-xmon_getchar(void)
-{
-    int c;
-
-    if (lineleft == 0) {
-	lineptr = line;
-	for (;;) {
-	    c = xmon_readchar();
-	    if (c == -1 || c == 4)
-		break;
-	    if (c == '\r' || c == '\n') {
-		*lineptr++ = '\n';
-		xmon_putchar('\n');
-		break;
-	    }
-	    switch (c) {
-	    case 0177:
-	    case '\b':
-		if (lineptr > line) {
-		    xmon_putchar('\b');
-		    xmon_putchar(' ');
-		    xmon_putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    case 'U' & 0x1F:
-		while (lineptr > line) {
-		    xmon_putchar('\b');
-		    xmon_putchar(' ');
-		    xmon_putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    default:
-		if (lineptr >= &line[sizeof(line) - 1])
-		    xmon_putchar('\a');
-		else {
-		    xmon_putchar(c);
-		    *lineptr++ = c;
-		}
-	    }
-	}
-	lineleft = lineptr - line;
-	lineptr = line;
-    }
-    if (lineleft == 0)
-	return -1;
-    --lineleft;
-    return *lineptr++;
-}
-
-char *
-xmon_fgets(char *str, int nb, void *f)
-{
-    char *p;
-    int c;
-
-    for (p = str; p < str + nb - 1; ) {
-	c = xmon_getchar();
-	if (c == -1) {
-	    if (p == str)
-		return NULL;
-	    break;
-	}
-	*p++ = c;
-	if (c == '\n')
-	    break;
-    }
-    *p = 0;
-    return str;
-}
-
-void
-xmon_enter(void)
-{
-}
-
-void
-xmon_leave(void)
-{
-}
diff --git a/arch/ppc/xmon/start_8xx.c b/arch/ppc/xmon/start_8xx.c
deleted file mode 100644
index 30974068c223..000000000000
--- a/arch/ppc/xmon/start_8xx.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * Copyright (C) 1996 Paul Mackerras.
- * Copyright (C) 2000 Dan Malek.
- * Quick hack of Paul's code to make XMON work on 8xx processors.  Lots
- * of assumptions, like the SMC1 is used, it has been initialized by the
- * loader at some point, and we can just stuff and suck bytes.
- * We rely upon the 8xx uart driver to support us, as the interface
- * changes between boot up and operational phases of the kernel.
- */
-#include <linux/string.h>
-#include <asm/machdep.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <linux/kernel.h>
-#include <asm/8xx_immap.h>
-#include <asm/mpc8xx.h>
-#include <asm/cpm1.h>
-
-extern void xmon_printf(const char *fmt, ...);
-extern int xmon_8xx_write(char *str, int nb);
-extern int xmon_8xx_read_poll(void);
-extern int xmon_8xx_read_char(void);
-void prom_drawhex(uint);
-void prom_drawstring(const char *str);
-
-static int use_screen = 1; /* default */
-
-#define TB_SPEED	25000000
-
-static inline unsigned int readtb(void)
-{
-	unsigned int ret;
-
-	asm volatile("mftb %0" : "=r" (ret) :);
-	return ret;
-}
-
-void buf_access(void)
-{
-}
-
-void
-xmon_map_scc(void)
-{
-
-	cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm);
-	use_screen = 0;
-	
-	prom_drawstring("xmon uses serial port\n");
-}
-
-static int scc_initialized = 0;
-
-void xmon_init_scc(void);
-
-int
-xmon_write(void *handle, void *ptr, int nb)
-{
-	char *p = ptr;
-	int i, c, ct;
-
-	if (!scc_initialized)
-		xmon_init_scc();
-
-	return(xmon_8xx_write(ptr, nb));
-}
-
-int xmon_wants_key;
-
-int
-xmon_read(void *handle, void *ptr, int nb)
-{
-	char *p = ptr;
-	int i;
-
-	if (!scc_initialized)
-		xmon_init_scc();
-
-	for (i = 0; i < nb; ++i) {
-		*p++ = xmon_8xx_read_char();
-	}
-	return i;
-}
-
-int
-xmon_read_poll(void)
-{
-	return(xmon_8xx_read_poll());
-}
-
-void
-xmon_init_scc()
-{
-	scc_initialized = 1;
-}
-
-#if 0
-extern int (*prom_entry)(void *);
-
-int
-xmon_exit(void)
-{
-    struct prom_args {
-	char *service;
-    } args;
-
-    for (;;) {
-	args.service = "exit";
-	(*prom_entry)(&args);
-    }
-}
-#endif
-
-void *xmon_stdin;
-void *xmon_stdout;
-void *xmon_stderr;
-
-void
-xmon_init(void)
-{
-}
-
-int
-xmon_putc(int c, void *f)
-{
-    char ch = c;
-
-    if (c == '\n')
-	xmon_putc('\r', f);
-    return xmon_write(f, &ch, 1) == 1? c: -1;
-}
-
-int
-xmon_putchar(int c)
-{
-    return xmon_putc(c, xmon_stdout);
-}
-
-int
-xmon_fputs(char *str, void *f)
-{
-    int n = strlen(str);
-
-    return xmon_write(f, str, n) == n? 0: -1;
-}
-
-int
-xmon_readchar(void)
-{
-    char ch;
-
-    for (;;) {
-	switch (xmon_read(xmon_stdin, &ch, 1)) {
-	case 1:
-	    return ch;
-	case -1:
-	    xmon_printf("read(stdin) returned -1\r\n", 0, 0);
-	    return -1;
-	}
-    }
-}
-
-static char line[256];
-static char *lineptr;
-static int lineleft;
-
-#if 0
-int xmon_expect(const char *str, unsigned int timeout)
-{
-	int c;
-	unsigned int t0;
-
-	timeout *= TB_SPEED;
-	t0 = readtb();
-	do {
-		lineptr = line;
-		for (;;) {
-			c = xmon_read_poll();
-			if (c == -1) {
-				if (readtb() - t0 > timeout)
-					return 0;
-				continue;
-			}
-			if (c == '\n')
-				break;
-			if (c != '\r' && lineptr < &line[sizeof(line) - 1])
-				*lineptr++ = c;
-		}
-		*lineptr = 0;
-	} while (strstr(line, str) == NULL);
-	return 1;
-}
-#endif
-
-int
-xmon_getchar(void)
-{
-    int c;
-
-    if (lineleft == 0) {
-	lineptr = line;
-	for (;;) {
-	    c = xmon_readchar();
-	    if (c == -1 || c == 4)
-		break;
-	    if (c == '\r' || c == '\n') {
-		*lineptr++ = '\n';
-		xmon_putchar('\n');
-		break;
-	    }
-	    switch (c) {
-	    case 0177:
-	    case '\b':
-		if (lineptr > line) {
-		    xmon_putchar('\b');
-		    xmon_putchar(' ');
-		    xmon_putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    case 'U' & 0x1F:
-		while (lineptr > line) {
-		    xmon_putchar('\b');
-		    xmon_putchar(' ');
-		    xmon_putchar('\b');
-		    --lineptr;
-		}
-		break;
-	    default:
-		if (lineptr >= &line[sizeof(line) - 1])
-		    xmon_putchar('\a');
-		else {
-		    xmon_putchar(c);
-		    *lineptr++ = c;
-		}
-	    }
-	}
-	lineleft = lineptr - line;
-	lineptr = line;
-    }
-    if (lineleft == 0)
-	return -1;
-    --lineleft;
-    return *lineptr++;
-}
-
-char *
-xmon_fgets(char *str, int nb, void *f)
-{
-    char *p;
-    int c;
-
-    for (p = str; p < str + nb - 1; ) {
-	c = xmon_getchar();
-	if (c == -1) {
-	    if (p == str)
-		return 0;
-	    break;
-	}
-	*p++ = c;
-	if (c == '\n')
-	    break;
-    }
-    *p = 0;
-    return str;
-}
-
-void
-prom_drawhex(uint val)
-{
-	unsigned char buf[10];
-
-	int i;
-	for (i = 7;  i >= 0;  i--)
-	{
-		buf[i] = "0123456789abcdef"[val & 0x0f];
-		val >>= 4;
-	}
-	buf[8] = '\0';
-	xmon_fputs(buf, xmon_stdout);
-}
-
-void
-prom_drawstring(const char *str)
-{
-	xmon_fputs(str, xmon_stdout);
-}
diff --git a/arch/ppc/xmon/subr_prf.c b/arch/ppc/xmon/subr_prf.c
deleted file mode 100644
index 126624f3f2ed..000000000000
--- a/arch/ppc/xmon/subr_prf.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Written by Cort Dougan to replace the version originally used
- * by Paul Mackerras, which came from NetBSD and thus had copyright
- * conflicts with Linux.
- *
- * This file makes liberal use of the standard linux utility
- * routines to reduce the size of the binary.  We assume we can
- * trust some parts of Linux inside the debugger.
- *   -- Cort (cort@cs.nmt.edu)
- *
- * Copyright (C) 1999 Cort Dougan.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <stdarg.h>
-#include "nonstdio.h"
-
-extern int xmon_write(void *, void *, int);
-
-void
-xmon_vfprintf(void *f, const char *fmt, va_list ap)
-{
-	static char xmon_buf[2048];
-	int n;
-
-	n = vsprintf(xmon_buf, fmt, ap);
-	xmon_write(f, xmon_buf, n);
-}
-
-void
-xmon_printf(const char *fmt, ...)
-{
-	va_list ap;
-
-	va_start(ap, fmt);
-	xmon_vfprintf(stdout, fmt, ap);
-	va_end(ap);
-}
-
-void
-xmon_fprintf(void *f, const char *fmt, ...)
-{
-	va_list ap;
-
-	va_start(ap, fmt);
-	xmon_vfprintf(f, fmt, ap);
-	va_end(ap);
-}
-
-void
-xmon_puts(char *s)
-{
-	xmon_write(stdout, s, strlen(s));
-}
diff --git a/arch/ppc/xmon/xmon.c b/arch/ppc/xmon/xmon.c
deleted file mode 100644
index b1a91744fd2d..000000000000
--- a/arch/ppc/xmon/xmon.c
+++ /dev/null
@@ -1,1780 +0,0 @@
-/*
- * Routines providing a simple monitor for use on the PowerMac.
- *
- * Copyright (C) 1996 Paul Mackerras.
- */
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/kallsyms.h>
-#include <asm/ptrace.h>
-#include <asm/string.h>
-#include <asm/machdep.h>
-#include <asm/xmon.h>
-#include "nonstdio.h"
-#include "privinst.h"
-
-#define scanhex	xmon_scanhex
-#define skipbl	xmon_skipbl
-
-#ifdef CONFIG_SMP
-static unsigned long cpus_in_xmon = 0;
-static unsigned long got_xmon = 0;
-static volatile int take_xmon = -1;
-#endif /* CONFIG_SMP */
-
-static unsigned adrs;
-static int size = 1;
-static unsigned ndump = 64;
-static unsigned nidump = 16;
-static unsigned ncsum = 4096;
-static int termch;
-
-static u_int bus_error_jmp[100];
-#define setjmp xmon_setjmp
-#define longjmp xmon_longjmp
-
-/* Breakpoint stuff */
-struct bpt {
-	unsigned address;
-	unsigned instr;
-	unsigned count;
-	unsigned char enabled;
-};
-
-#define NBPTS	16
-static struct bpt bpts[NBPTS];
-static struct bpt dabr;
-static struct bpt iabr;
-static unsigned bpinstr = 0x7fe00008;	/* trap */
-
-/* Prototypes */
-extern void (*debugger_fault_handler)(struct pt_regs *);
-static int cmds(struct pt_regs *);
-static int mread(unsigned, void *, int);
-static int mwrite(unsigned, void *, int);
-static void handle_fault(struct pt_regs *);
-static void byterev(unsigned char *, int);
-static void memex(void);
-static int bsesc(void);
-static void dump(void);
-static void prdump(unsigned, int);
-#ifdef __MWERKS__
-static void prndump(unsigned, int);
-static int nvreadb(unsigned);
-#endif
-static int ppc_inst_dump(unsigned, int);
-void print_address(unsigned);
-static int getsp(void);
-static void dump_hash_table(void);
-static void backtrace(struct pt_regs *);
-static void excprint(struct pt_regs *);
-static void prregs(struct pt_regs *);
-static void memops(int);
-static void memlocate(void);
-static void memzcan(void);
-static void memdiffs(unsigned char *, unsigned char *, unsigned, unsigned);
-int skipbl(void);
-int scanhex(unsigned *valp);
-static void scannl(void);
-static int hexdigit(int);
-void getstring(char *, int);
-static void flush_input(void);
-static int inchar(void);
-static void take_input(char *);
-/* static void openforth(void); */
-static unsigned read_spr(int);
-static void write_spr(int, unsigned);
-static void super_regs(void);
-static void symbol_lookup(void);
-static void remove_bpts(void);
-static void insert_bpts(void);
-static struct bpt *at_breakpoint(unsigned pc);
-static void bpt_cmds(void);
-void cacheflush(void);
-#ifdef CONFIG_SMP
-static void cpu_cmd(void);
-#endif /* CONFIG_SMP */
-static void csum(void);
-static void bootcmds(void);
-static void proccall(void);
-static void printtime(void);
-
-extern int print_insn_big_powerpc(FILE *, unsigned long, unsigned);
-extern void printf(const char *fmt, ...);
-extern int putchar(int ch);
-extern int setjmp(u_int *);
-extern void longjmp(u_int *, int);
-
-extern void xmon_enter(void);
-extern void xmon_leave(void);
-
-static unsigned start_tb[NR_CPUS][2];
-static unsigned stop_tb[NR_CPUS][2];
-
-#define GETWORD(v)	(((v)[0] << 24) + ((v)[1] << 16) + ((v)[2] << 8) + (v)[3])
-
-#define isxdigit(c)	(('0' <= (c) && (c) <= '9') \
-			 || ('a' <= (c) && (c) <= 'f') \
-			 || ('A' <= (c) && (c) <= 'F'))
-#define isalnum(c)	(('0' <= (c) && (c) <= '9') \
-			 || ('a' <= (c) && (c) <= 'z') \
-			 || ('A' <= (c) && (c) <= 'Z'))
-#define isspace(c)	(c == ' ' || c == '\t' || c == 10 || c == 13 || c == 0)
-
-static char *help_string = "\
-Commands:\n\
-  d	dump bytes\n\
-  di	dump instructions\n\
-  df	dump float values\n\
-  dd	dump double values\n\
-  e	print exception information\n\
-  h	dump hash table\n\
-  m	examine/change memory\n\
-  mm	move a block of memory\n\
-  ms	set a block of memory\n\
-  md	compare two blocks of memory\n\
-  r	print registers\n\
-  S	print special registers\n\
-  t	print backtrace\n\
-  la	lookup address\n\
-  ls	lookup symbol\n\
-  C	checksum\n\
-  p	call function with arguments\n\
-  T	print time\n\
-  x	exit monitor\n\
-  zr    reboot\n\
-  zh    halt\n\
-";
-
-static int xmon_trace[NR_CPUS];
-#define SSTEP	1		/* stepping because of 's' command */
-#define BRSTEP	2		/* stepping over breakpoint */
-
-#ifdef CONFIG_4xx
-#define MSR_SSTEP_ENABLE 0x200
-#else
-#define MSR_SSTEP_ENABLE 0x400
-#endif
-
-static struct pt_regs *xmon_regs[NR_CPUS];
-
-extern inline void sync(void)
-{
-	asm volatile("sync; isync");
-}
-
-extern inline void __delay(unsigned int loops)
-{
-	if (loops != 0)
-		__asm__ __volatile__("mtctr %0; 1: bdnz 1b" : :
-				     "r" (loops) : "ctr");
-}
-
-/* Print an address in numeric and symbolic form (if possible) */
-static void xmon_print_symbol(unsigned long address, const char *mid,
-			      const char *after)
-{
-	char *modname;
-	const char *name = NULL;
-	unsigned long offset, size;
-	static char tmpstr[128];
-
-	printf("%.8lx", address);
-	if (setjmp(bus_error_jmp) == 0) {
-		debugger_fault_handler = handle_fault;
-		sync();
-		name = kallsyms_lookup(address, &size, &offset, &modname,
-				       tmpstr);
-		sync();
-		/* wait a little while to see if we get a machine check */
-		__delay(200);
-	}
-	debugger_fault_handler = NULL;
-
-	if (name) {
-		printf("%s%s+%#lx/%#lx", mid, name, offset, size);
-		if (modname)
-			printf(" [%s]", modname);
-	}
-	printf("%s", after);
-}
-
-static void get_tb(unsigned *p)
-{
-	unsigned hi, lo, hiagain;
-
-	if ((get_pvr() >> 16) == 1)
-		return;
-
-	do {
-		asm volatile("mftbu %0; mftb %1; mftbu %2"
-			     : "=r" (hi), "=r" (lo), "=r" (hiagain));
-	} while (hi != hiagain);
-	p[0] = hi;
-	p[1] = lo;
-}
-
-static inline void xmon_enable_sstep(struct pt_regs *regs)
-{
-	regs->msr |= MSR_SSTEP_ENABLE;
-#ifdef CONFIG_4xx
-	mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
-#endif
-}
-
-int xmon(struct pt_regs *excp)
-{
-	struct pt_regs regs;
-	int msr, cmd;
-
-	get_tb(stop_tb[smp_processor_id()]);
-	if (excp == NULL) {
-		asm volatile ("stw	0,0(%0)\n\
-			lwz	0,0(1)\n\
-			stw	0,4(%0)\n\
-			stmw	2,8(%0)" : : "b" (&regs));
-		regs.nip = regs.link = ((unsigned long *)regs.gpr[1])[1];
-		regs.msr = get_msr();
-		regs.ctr = get_ctr();
-		regs.xer = get_xer();
-		regs.ccr = get_cr();
-		regs.trap = 0;
-		excp = &regs;
-	}
-
-	msr = get_msr();
-	set_msr(msr & ~0x8000);	/* disable interrupts */
-	xmon_regs[smp_processor_id()] = excp;
-	xmon_enter();
-	excprint(excp);
-#ifdef CONFIG_SMP
-	if (test_and_set_bit(smp_processor_id(), &cpus_in_xmon))
-		for (;;)
-			;
-	while (test_and_set_bit(0, &got_xmon)) {
-		if (take_xmon == smp_processor_id()) {
-			take_xmon = -1;
-			break;
-		}
-	}
-	/*
-	 * XXX: breakpoints are removed while any cpu is in xmon
-	 */
-#endif /* CONFIG_SMP */
-	remove_bpts();
-	cmd = cmds(excp);
-	if (cmd == 's') {
-		xmon_trace[smp_processor_id()] = SSTEP;
-		xmon_enable_sstep(excp);
-	} else if (at_breakpoint(excp->nip)) {
-		xmon_trace[smp_processor_id()] = BRSTEP;
-		xmon_enable_sstep(excp);
-	} else {
-		xmon_trace[smp_processor_id()] = 0;
-		insert_bpts();
-	}
-	xmon_leave();
-	xmon_regs[smp_processor_id()] = NULL;
-#ifdef CONFIG_SMP
-	clear_bit(0, &got_xmon);
-	clear_bit(smp_processor_id(), &cpus_in_xmon);
-#endif /* CONFIG_SMP */
-	set_msr(msr);		/* restore interrupt enable */
-	get_tb(start_tb[smp_processor_id()]);
-
-	return cmd != 'X';
-}
-
-irqreturn_t
-xmon_irq(int irq, void *d, struct pt_regs *regs)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-	printf("Keyboard interrupt\n");
-	xmon(regs);
-	local_irq_restore(flags);
-	return IRQ_HANDLED;
-}
-
-int
-xmon_bpt(struct pt_regs *regs)
-{
-	struct bpt *bp;
-
-	bp = at_breakpoint(regs->nip);
-	if (!bp)
-		return 0;
-	if (bp->count) {
-		--bp->count;
-		remove_bpts();
-		excprint(regs);
-		xmon_trace[smp_processor_id()] = BRSTEP;
-		xmon_enable_sstep(regs);
-	} else {
-		xmon(regs);
-	}
-	return 1;
-}
-
-int
-xmon_sstep(struct pt_regs *regs)
-{
-	if (!xmon_trace[smp_processor_id()])
-		return 0;
-	if (xmon_trace[smp_processor_id()] == BRSTEP) {
-		xmon_trace[smp_processor_id()] = 0;
-		insert_bpts();
-	} else {
-		xmon(regs);
-	}
-	return 1;
-}
-
-int
-xmon_dabr_match(struct pt_regs *regs)
-{
-	if (dabr.enabled && dabr.count) {
-		--dabr.count;
-		remove_bpts();
-		excprint(regs);
-		xmon_trace[smp_processor_id()] = BRSTEP;
-		regs->msr |= 0x400;
-	} else {
-		dabr.instr = regs->nip;
-		xmon(regs);
-	}
-	return 1;
-}
-
-int
-xmon_iabr_match(struct pt_regs *regs)
-{
-	if (iabr.enabled && iabr.count) {
-		--iabr.count;
-		remove_bpts();
-		excprint(regs);
-		xmon_trace[smp_processor_id()] = BRSTEP;
-		regs->msr |= 0x400;
-	} else {
-		xmon(regs);
-	}
-	return 1;
-}
-
-static struct bpt *
-at_breakpoint(unsigned pc)
-{
-	int i;
-	struct bpt *bp;
-
-	if (dabr.enabled && pc == dabr.instr)
-		return &dabr;
-	if (iabr.enabled && pc == iabr.address)
-		return &iabr;
-	bp = bpts;
-	for (i = 0; i < NBPTS; ++i, ++bp)
-		if (bp->enabled && pc == bp->address)
-			return bp;
-	return NULL;
-}
-
-static void
-insert_bpts(void)
-{
-	int i;
-	struct bpt *bp;
-
-	bp = bpts;
-	for (i = 0; i < NBPTS; ++i, ++bp) {
-		if (!bp->enabled)
-			continue;
-		if (mread(bp->address, &bp->instr, 4) != 4
-		    || mwrite(bp->address, &bpinstr, 4) != 4) {
-			printf("Couldn't insert breakpoint at %x, disabling\n",
-			       bp->address);
-			bp->enabled = 0;
-		}
-		store_inst((void *) bp->address);
-	}
-#if ! (defined(CONFIG_8xx) || defined(CONFIG_4xx))
-	if (dabr.enabled)
-		set_dabr(dabr.address);
-	if (iabr.enabled)
-		set_iabr(iabr.address);
-#endif
-}
-
-static void
-remove_bpts(void)
-{
-	int i;
-	struct bpt *bp;
-	unsigned instr;
-
-#if ! (defined(CONFIG_8xx) || defined(CONFIG_4xx))
-	set_dabr(0);
-	set_iabr(0);
-#endif
-	bp = bpts;
-	for (i = 0; i < NBPTS; ++i, ++bp) {
-		if (!bp->enabled)
-			continue;
-		if (mread(bp->address, &instr, 4) == 4
-		    && instr == bpinstr
-		    && mwrite(bp->address, &bp->instr, 4) != 4)
-			printf("Couldn't remove breakpoint at %x\n",
-			       bp->address);
-		store_inst((void *) bp->address);
-	}
-}
-
-static char *last_cmd;
-
-/* Command interpreting routine */
-static int
-cmds(struct pt_regs *excp)
-{
-	int cmd;
-
-	last_cmd = NULL;
-	for(;;) {
-#ifdef CONFIG_SMP
-		printf("%d:", smp_processor_id());
-#endif /* CONFIG_SMP */
-		printf("mon> ");
-		fflush(stdout);
-		flush_input();
-		termch = 0;
-		cmd = skipbl();
-		if( cmd == '\n' ) {
-			if (last_cmd == NULL)
-				continue;
-			take_input(last_cmd);
-			last_cmd = NULL;
-			cmd = inchar();
-		}
-		switch (cmd) {
-		case 'm':
-			cmd = inchar();
-			switch (cmd) {
-			case 'm':
-			case 's':
-			case 'd':
-				memops(cmd);
-				break;
-			case 'l':
-				memlocate();
-				break;
-			case 'z':
-				memzcan();
-				break;
-			default:
-				termch = cmd;
-				memex();
-			}
-			break;
-		case 'd':
-			dump();
-			break;
-		case 'l':
-			symbol_lookup();
-			break;
-		case 'r':
-			if (excp != NULL)
-				prregs(excp);	/* print regs */
-			break;
-		case 'e':
-			if (excp == NULL)
-				printf("No exception information\n");
-			else
-				excprint(excp);
-			break;
-		case 'S':
-			super_regs();
-			break;
-		case 't':
-			backtrace(excp);
-			break;
-		case 'f':
-			cacheflush();
-			break;
-		case 'h':
-			dump_hash_table();
-			break;
-		case 's':
-		case 'x':
-		case EOF:
-			return cmd;
-		case '?':
-			printf(help_string);
-			break;
-		default:
-			printf("Unrecognized command: ");
-			if( ' ' < cmd && cmd <= '~' )
-				putchar(cmd);
-			else
-				printf("\\x%x", cmd);
-			printf(" (type ? for help)\n");
-			break;
-		case 'b':
-			bpt_cmds();
-			break;
-		case 'C':
-			csum();
-			break;
-#ifdef CONFIG_SMP
-		case 'c':
-			cpu_cmd();
-			break;
-#endif /* CONFIG_SMP */
-		case 'z':
-			bootcmds();
-			break;
-		case 'p':
-			proccall();
-			break;
-		case 'T':
-			printtime();
-			break;
-		}
-	}
-}
-
-extern unsigned tb_to_us;
-
-#define mulhwu(x,y) \
-({unsigned z; asm ("mulhwu %0,%1,%2" : "=r" (z) : "r" (x), "r" (y)); z;})
-
-static void printtime(void)
-{
-	unsigned int delta;
-
-	delta = stop_tb[smp_processor_id()][1]
-		- start_tb[smp_processor_id()][1];
-	delta = mulhwu(tb_to_us, delta);
-	printf("%u.%06u seconds\n", delta / 1000000, delta % 1000000);
-}
-
-static void bootcmds(void)
-{
-	int cmd;
-
-	cmd = inchar();
-	if (cmd == 'r')
-		ppc_md.restart(NULL);
-	else if (cmd == 'h')
-		ppc_md.halt();
-	else if (cmd == 'p')
-		ppc_md.power_off();
-}
-
-#ifdef CONFIG_SMP
-static void cpu_cmd(void)
-{
-	unsigned cpu;
-	int timeout;
-	int cmd;
-
-	cmd = inchar();
-	if (cmd == 'i') {
-		/* interrupt other cpu(s) */
-		cpu = MSG_ALL_BUT_SELF;
-		if (scanhex(&cpu))
-			smp_send_xmon_break(cpu);
-		return;
-	}
-	termch = cmd;
-	if (!scanhex(&cpu)) {
-		/* print cpus waiting or in xmon */
-		printf("cpus stopped:");
-		for (cpu = 0; cpu < NR_CPUS; ++cpu) {
-			if (test_bit(cpu, &cpus_in_xmon)) {
-				printf(" %d", cpu);
-				if (cpu == smp_processor_id())
-					printf("*", cpu);
-			}
-		}
-		printf("\n");
-		return;
-	}
-	/* try to switch to cpu specified */
-	take_xmon = cpu;
-	timeout = 10000000;
-	while (take_xmon >= 0) {
-		if (--timeout == 0) {
-			/* yes there's a race here */
-			take_xmon = -1;
-			printf("cpu %u didn't take control\n", cpu);
-			return;
-		}
-	}
-	/* now have to wait to be given control back */
-	while (test_and_set_bit(0, &got_xmon)) {
-		if (take_xmon == smp_processor_id()) {
-			take_xmon = -1;
-			break;
-		}
-	}
-}
-#endif /* CONFIG_SMP */
-
-
-static unsigned short fcstab[256] = {
-	0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
-	0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
-	0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
-	0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
-	0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
-	0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
-	0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
-	0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
-	0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
-	0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
-	0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
-	0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
-	0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
-	0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
-	0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
-	0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
-	0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
-	0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
-	0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
-	0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
-	0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
-	0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
-	0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
-	0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
-	0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
-	0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
-	0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
-	0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
-	0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
-	0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
-	0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
-	0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
-};
-
-#define FCS(fcs, c)	(((fcs) >> 8) ^ fcstab[((fcs) ^ (c)) & 0xff])
-
-static void
-csum(void)
-{
-	unsigned int i;
-	unsigned short fcs;
-	unsigned char v;
-
-	if (!scanhex(&adrs))
-		return;
-	if (!scanhex(&ncsum))
-		return;
-	fcs = 0xffff;
-	for (i = 0; i < ncsum; ++i) {
-		if (mread(adrs+i, &v, 1) == 0) {
-			printf("csum stopped at %x\n", adrs+i);
-			break;
-		}
-		fcs = FCS(fcs, v);
-	}
-	printf("%x\n", fcs);
-}
-
-static void
-bpt_cmds(void)
-{
-	int cmd;
-	unsigned a;
-	int mode, i;
-	struct bpt *bp;
-
-	cmd = inchar();
-	switch (cmd) {
-#if ! (defined(CONFIG_8xx) || defined(CONFIG_4xx))
-	case 'd':
-		mode = 7;
-		cmd = inchar();
-		if (cmd == 'r')
-			mode = 5;
-		else if (cmd == 'w')
-			mode = 6;
-		else
-			termch = cmd;
-		cmd = inchar();
-		if (cmd == 'p')
-			mode &= ~4;
-		else
-			termch = cmd;
-		dabr.address = 0;
-		dabr.count = 0;
-		dabr.enabled = scanhex(&dabr.address);
-		scanhex(&dabr.count);
-		if (dabr.enabled)
-			dabr.address = (dabr.address & ~7) | mode;
-		break;
-	case 'i':
-		cmd = inchar();
-		if (cmd == 'p')
-			mode = 2;
-		else
-			mode = 3;
-		iabr.address = 0;
-		iabr.count = 0;
-		iabr.enabled = scanhex(&iabr.address);
-		if (iabr.enabled)
-			iabr.address |= mode;
-		scanhex(&iabr.count);
-		break;
-#endif
-	case 'c':
-		if (!scanhex(&a)) {
-			/* clear all breakpoints */
-			for (i = 0; i < NBPTS; ++i)
-				bpts[i].enabled = 0;
-			iabr.enabled = 0;
-			dabr.enabled = 0;
-			printf("All breakpoints cleared\n");
-		} else {
-			bp = at_breakpoint(a);
-			if (bp == 0) {
-				printf("No breakpoint at %x\n", a);
-			} else {
-				bp->enabled = 0;
-			}
-		}
-		break;
-	default:
-		termch = cmd;
-		if (!scanhex(&a)) {
-			/* print all breakpoints */
-			printf("type  address   count\n");
-			if (dabr.enabled) {
-				printf("data %.8x %8x [", dabr.address & ~7,
-				       dabr.count);
-				if (dabr.address & 1)
-					printf("r");
-				if (dabr.address & 2)
-					printf("w");
-				if (!(dabr.address & 4))
-					printf("p");
-				printf("]\n");
-			}
-			if (iabr.enabled)
-				printf("inst %.8x %8x\n", iabr.address & ~3,
-				       iabr.count);
-			for (bp = bpts; bp < &bpts[NBPTS]; ++bp)
-				if (bp->enabled)
-					printf("trap %.8x %8x\n", bp->address,
-					       bp->count);
-			break;
-		}
-		bp = at_breakpoint(a);
-		if (bp == 0) {
-			for (bp = bpts; bp < &bpts[NBPTS]; ++bp)
-				if (!bp->enabled)
-					break;
-			if (bp >= &bpts[NBPTS]) {
-				printf("Sorry, no free breakpoints\n");
-				break;
-			}
-		}
-		bp->enabled = 1;
-		bp->address = a;
-		bp->count = 0;
-		scanhex(&bp->count);
-		break;
-	}
-}
-
-static void
-backtrace(struct pt_regs *excp)
-{
-	unsigned sp;
-	unsigned stack[2];
-	struct pt_regs regs;
-	extern char ret_from_except, ret_from_except_full, ret_from_syscall;
-
-	printf("backtrace:\n");
-	
-	if (excp != NULL)
-		sp = excp->gpr[1];
-	else
-		sp = getsp();
-	scanhex(&sp);
-	scannl();
-	for (; sp != 0; sp = stack[0]) {
-		if (mread(sp, stack, sizeof(stack)) != sizeof(stack))
-			break;
-		printf("[%.8lx] ", stack[0]);
-		xmon_print_symbol(stack[1], " ", "\n");
-		if (stack[1] == (unsigned) &ret_from_except
-		    || stack[1] == (unsigned) &ret_from_except_full
-		    || stack[1] == (unsigned) &ret_from_syscall) {
-			if (mread(sp+16, &regs, sizeof(regs)) != sizeof(regs))
-				break;
-			printf("exception:%x [%x] %x\n", regs.trap, sp+16,
-			       regs.nip);
-			sp = regs.gpr[1];
-			if (mread(sp, stack, sizeof(stack)) != sizeof(stack))
-				break;
-		}
-	}
-}
-
-int
-getsp(void)
-{
-    int x;
-
-    asm("mr %0,1" : "=r" (x) :);
-    return x;
-}
-
-void
-excprint(struct pt_regs *fp)
-{
-	int trap;
-
-#ifdef CONFIG_SMP
-	printf("cpu %d: ", smp_processor_id());
-#endif /* CONFIG_SMP */
-	printf("vector: %x at pc=", fp->trap);
-	xmon_print_symbol(fp->nip, ": ", ", lr=");
-	xmon_print_symbol(fp->link, ": ", "\n");
-	printf("msr = %x, sp = %x [%x]\n", fp->msr, fp->gpr[1], fp);
-	trap = TRAP(fp);
-	if (trap == 0x300 || trap == 0x600)
-		printf("dar = %x, dsisr = %x\n", fp->dar, fp->dsisr);
-	if (current)
-		printf("current = %x, pid = %d, comm = %s\n",
-		       current, current->pid, current->comm);
-}
-
-void
-prregs(struct pt_regs *fp)
-{
-	int n;
-	unsigned base;
-
-	if (scanhex(&base))
-		fp = (struct pt_regs *) base;
-	for (n = 0; n < 32; ++n) {
-		printf("R%.2d = %.8x%s", n, fp->gpr[n],
-		       (n & 3) == 3? "\n": "   ");
-		if (n == 12 && !FULL_REGS(fp)) {
-			printf("\n");
-			break;
-		}
-	}
-	printf("pc  = %.8x   msr = %.8x   lr  = %.8x   cr  = %.8x\n",
-	       fp->nip, fp->msr, fp->link, fp->ccr);
-	printf("ctr = %.8x   xer = %.8x   trap = %4x\n",
-	       fp->ctr, fp->xer, fp->trap);
-}
-
-void
-cacheflush(void)
-{
-	int cmd;
-	unsigned nflush;
-
-	cmd = inchar();
-	if (cmd != 'i')
-		termch = cmd;
-	scanhex(&adrs);
-	if (termch != '\n')
-		termch = 0;
-	nflush = 1;
-	scanhex(&nflush);
-	nflush = (nflush + 31) / 32;
-	if (cmd != 'i') {
-		for (; nflush > 0; --nflush, adrs += 0x20)
-			cflush((void *) adrs);
-	} else {
-		for (; nflush > 0; --nflush, adrs += 0x20)
-			cinval((void *) adrs);
-	}
-}
-
-unsigned int
-read_spr(int n)
-{
-    unsigned int instrs[2];
-    int (*code)(void);
-
-    instrs[0] = 0x7c6002a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6);
-    instrs[1] = 0x4e800020;
-    store_inst(instrs);
-    store_inst(instrs+1);
-    code = (int (*)(void)) instrs;
-    return code();
-}
-
-void
-write_spr(int n, unsigned int val)
-{
-    unsigned int instrs[2];
-    int (*code)(unsigned int);
-
-    instrs[0] = 0x7c6003a6 + ((n & 0x1F) << 16) + ((n & 0x3e0) << 6);
-    instrs[1] = 0x4e800020;
-    store_inst(instrs);
-    store_inst(instrs+1);
-    code = (int (*)(unsigned int)) instrs;
-    code(val);
-}
-
-static unsigned int regno;
-extern char exc_prolog;
-extern char dec_exc;
-
-void
-super_regs(void)
-{
-	int i, cmd;
-	unsigned val;
-
-	cmd = skipbl();
-	if (cmd == '\n') {
-		printf("msr = %x, pvr = %x\n", get_msr(), get_pvr());
-		printf("sprg0-3 = %x %x %x %x\n", get_sprg0(), get_sprg1(),
-		       get_sprg2(), get_sprg3());
-		printf("srr0 = %x, srr1 = %x\n", get_srr0(), get_srr1());
-#ifdef CONFIG_PPC_STD_MMU
-		printf("sr0-15 =");
-		for (i = 0; i < 16; ++i)
-			printf(" %x", get_sr(i));
-		printf("\n");
-#endif
-		asm("mr %0,1" : "=r" (i) :);
-		printf("sp = %x ", i);
-		asm("mr %0,2" : "=r" (i) :);
-		printf("toc = %x\n", i);
-		return;
-	}
-
-	scanhex(&regno);
-	switch (cmd) {
-	case 'w':
-		val = read_spr(regno);
-		scanhex(&val);
-		write_spr(regno, val);
-		/* fall through */
-	case 'r':
-		printf("spr %x = %x\n", regno, read_spr(regno));
-		break;
-	case 's':
-		val = get_sr(regno);
-		scanhex(&val);
-		set_sr(regno, val);
-		break;
-	case 'm':
-		val = get_msr();
-		scanhex(&val);
-		set_msr(val);
-		break;
-	}
-	scannl();
-}
-
-#ifndef CONFIG_PPC_STD_MMU
-static void
-dump_hash_table(void)
-{
-	printf("This CPU doesn't have a hash table.\n");
-}
-#else
-
-static void
-dump_hash_table_seg(unsigned seg, unsigned start, unsigned end)
-{
-	extern void *Hash;
-	extern unsigned long Hash_size;
-	unsigned *htab = Hash;
-	unsigned hsize = Hash_size;
-	unsigned v, hmask, va, last_va = 0;
-	int found, last_found, i;
-	unsigned *hg, w1, last_w2 = 0, last_va0 = 0;
-
-	last_found = 0;
-	hmask = hsize / 64 - 1;
-	va = start;
-	start = (start >> 12) & 0xffff;
-	end = (end >> 12) & 0xffff;
-	for (v = start; v < end; ++v) {
-		found = 0;
-		hg = htab + (((v ^ seg) & hmask) * 16);
-		w1 = 0x80000000 | (seg << 7) | (v >> 10);
-		for (i = 0; i < 8; ++i, hg += 2) {
-			if (*hg == w1) {
-				found = 1;
-				break;
-			}
-		}
-		if (!found) {
-			w1 ^= 0x40;
-			hg = htab + ((~(v ^ seg) & hmask) * 16);
-			for (i = 0; i < 8; ++i, hg += 2) {
-				if (*hg == w1) {
-					found = 1;
-					break;
-				}
-			}
-		}
-		if (!(last_found && found && (hg[1] & ~0x180) == last_w2 + 4096)) {
-			if (last_found) {
-				if (last_va != last_va0)
-					printf(" ... %x", last_va);
-				printf("\n");
-			}
-			if (found) {
-				printf("%x to %x", va, hg[1]);
-				last_va0 = va;
-			}
-			last_found = found;
-		}
-		if (found) {
-			last_w2 = hg[1] & ~0x180;
-			last_va = va;
-		}
-		va += 4096;
-	}
-	if (last_found)
-		printf(" ... %x\n", last_va);
-}
-
-static unsigned hash_ctx;
-static unsigned hash_start;
-static unsigned hash_end;
-
-static void
-dump_hash_table(void)
-{
-	int seg;
-	unsigned seg_start, seg_end;
-
-	hash_ctx = 0;
-	hash_start = 0;
-	hash_end = 0xfffff000;
-	scanhex(&hash_ctx);
-	scanhex(&hash_start);
-	scanhex(&hash_end);
-	printf("Mappings for context %x\n", hash_ctx);
-	seg_start = hash_start;
-	for (seg = hash_start >> 28; seg <= hash_end >> 28; ++seg) {
-		seg_end = (seg << 28) | 0x0ffff000;
-		if (seg_end > hash_end)
-			seg_end = hash_end;
-		dump_hash_table_seg((hash_ctx << 4) + (seg * 0x111),
-				    seg_start, seg_end);
-		seg_start = seg_end + 0x1000;
-	}
-}
-#endif /* CONFIG_PPC_STD_MMU */
-
-/*
- * Stuff for reading and writing memory safely
- */
-
-int
-mread(unsigned adrs, void *buf, int size)
-{
-	volatile int n;
-	char *p, *q;
-
-	n = 0;
-	if( setjmp(bus_error_jmp) == 0 ){
-		debugger_fault_handler = handle_fault;
-		sync();
-		p = (char *) adrs;
-		q = (char *) buf;
-		switch (size) {
-		case 2: *(short *)q = *(short *)p;	break;
-		case 4: *(int *)q = *(int *)p;		break;
-		default:
-			for( ; n < size; ++n ) {
-				*q++ = *p++;
-				sync();
-			}
-		}
-		sync();
-		/* wait a little while to see if we get a machine check */
-		__delay(200);
-		n = size;
-	}
-	debugger_fault_handler = NULL;
-	return n;
-}
-
-int
-mwrite(unsigned adrs, void *buf, int size)
-{
-	volatile int n;
-	char *p, *q;
-
-	n = 0;
-	if( setjmp(bus_error_jmp) == 0 ){
-		debugger_fault_handler = handle_fault;
-		sync();
-		p = (char *) adrs;
-		q = (char *) buf;
-		switch (size) {
-		case 2: *(short *)p = *(short *)q;	break;
-		case 4: *(int *)p = *(int *)q;		break;
-		default:
-			for( ; n < size; ++n ) {
-				*p++ = *q++;
-				sync();
-			}
-		}
-		sync();
-		n = size;
-	} else {
-		printf("*** Error writing address %x\n", adrs + n);
-	}
-	debugger_fault_handler = NULL;
-	return n;
-}
-
-static int fault_type;
-static int fault_except;
-static char *fault_chars[] = { "--", "**", "##" };
-
-static void
-handle_fault(struct pt_regs *regs)
-{
-	fault_except = TRAP(regs);
-	fault_type = TRAP(regs) == 0x200? 0: TRAP(regs) == 0x300? 1: 2;
-	longjmp(bus_error_jmp, 1);
-}
-
-#define SWAP(a, b, t)	((t) = (a), (a) = (b), (b) = (t))
-
-void
-byterev(unsigned char *val, int size)
-{
-	int t;
-	
-	switch (size) {
-	case 2:
-		SWAP(val[0], val[1], t);
-		break;
-	case 4:
-		SWAP(val[0], val[3], t);
-		SWAP(val[1], val[2], t);
-		break;
-	}
-}
-
-static int brev;
-static int mnoread;
-
-void
-memex(void)
-{
-    int cmd, inc, i, nslash;
-    unsigned n;
-    unsigned char val[4];
-
-    last_cmd = "m\n";
-    scanhex(&adrs);
-    while ((cmd = skipbl()) != '\n') {
-	switch( cmd ){
-	case 'b':	size = 1;	break;
-	case 'w':	size = 2;	break;
-	case 'l':	size = 4;	break;
-	case 'r': 	brev = !brev;	break;
-	case 'n':	mnoread = 1;	break;
-	case '.':	mnoread = 0;	break;
-	}
-    }
-    if( size <= 0 )
-	size = 1;
-    else if( size > 4 )
-	size = 4;
-    for(;;){
-	if (!mnoread)
-	    n = mread(adrs, val, size);
-	printf("%.8x%c", adrs, brev? 'r': ' ');
-	if (!mnoread) {
-	    if (brev)
-		byterev(val, size);
-	    putchar(' ');
-	    for (i = 0; i < n; ++i)
-		printf("%.2x", val[i]);
-	    for (; i < size; ++i)
-		printf("%s", fault_chars[fault_type]);
-	}
-	putchar(' ');
-	inc = size;
-	nslash = 0;
-	for(;;){
-	    if( scanhex(&n) ){
-		for (i = 0; i < size; ++i)
-		    val[i] = n >> (i * 8);
-		if (!brev)
-		    byterev(val, size);
-		mwrite(adrs, val, size);
-		inc = size;
-	    }
-	    cmd = skipbl();
-	    if (cmd == '\n')
-		break;
-	    inc = 0;
-	    switch (cmd) {
-	    case '\'':
-		for(;;){
-		    n = inchar();
-		    if( n == '\\' )
-			n = bsesc();
-		    else if( n == '\'' )
-			break;
-		    for (i = 0; i < size; ++i)
-			val[i] = n >> (i * 8);
-		    if (!brev)
-			byterev(val, size);
-		    mwrite(adrs, val, size);
-		    adrs += size;
-		}
-		adrs -= size;
-		inc = size;
-		break;
-	    case ',':
-		adrs += size;
-		break;
-	    case '.':
-		mnoread = 0;
-		break;
-	    case ';':
-		break;
-	    case 'x':
-	    case EOF:
-		scannl();
-		return;
-	    case 'b':
-	    case 'v':
-		size = 1;
-		break;
-	    case 'w':
-		size = 2;
-		break;
-	    case 'l':
-		size = 4;
-		break;
-	    case '^':
-		adrs -= size;
-		break;
-		break;
-	    case '/':
-		if (nslash > 0)
-		    adrs -= 1 << nslash;
-		else
-		    nslash = 0;
-		nslash += 4;
-		adrs += 1 << nslash;
-		break;
-	    case '\\':
-		if (nslash < 0)
-		    adrs += 1 << -nslash;
-		else
-		    nslash = 0;
-		nslash -= 4;
-		adrs -= 1 << -nslash;
-		break;
-	    case 'm':
-		scanhex(&adrs);
-		break;
-	    case 'n':
-		mnoread = 1;
-		break;
-	    case 'r':
-		brev = !brev;
-		break;
-	    case '<':
-		n = size;
-		scanhex(&n);
-		adrs -= n;
-		break;
-	    case '>':
-		n = size;
-		scanhex(&n);
-		adrs += n;
-		break;
-	    }
-	}
-	adrs += inc;
-    }
-}
-
-int
-bsesc(void)
-{
-	int c;
-
-	c = inchar();
-	switch( c ){
-	case 'n':	c = '\n';	break;
-	case 'r':	c = '\r';	break;
-	case 'b':	c = '\b';	break;
-	case 't':	c = '\t';	break;
-	}
-	return c;
-}
-
-void
-dump(void)
-{
-	int c;
-
-	c = inchar();
-	if ((isxdigit(c) && c != 'f' && c != 'd') || c == '\n')
-		termch = c;
-	scanhex(&adrs);
-	if( termch != '\n')
-		termch = 0;
-	if( c == 'i' ){
-		scanhex(&nidump);
-		if( nidump == 0 )
-			nidump = 16;
-		adrs += ppc_inst_dump(adrs, nidump);
-		last_cmd = "di\n";
-	} else {
-		scanhex(&ndump);
-		if( ndump == 0 )
-			ndump = 64;
-		prdump(adrs, ndump);
-		adrs += ndump;
-		last_cmd = "d\n";
-	}
-}
-
-void
-prdump(unsigned adrs, int ndump)
-{
-	register int n, m, c, r, nr;
-	unsigned char temp[16];
-
-	for( n = ndump; n > 0; ){
-		printf("%.8x", adrs);
-		putchar(' ');
-		r = n < 16? n: 16;
-		nr = mread(adrs, temp, r);
-		adrs += nr;
-		for( m = 0; m < r; ++m ){
-			putchar((m & 3) == 0 && m > 0? '.': ' ');
-			if( m < nr )
-				printf("%.2x", temp[m]);
-			else
-				printf("%s", fault_chars[fault_type]);
-		}
-		for(; m < 16; ++m )
-			printf("   ");
-		printf("  |");
-		for( m = 0; m < r; ++m ){
-			if( m < nr ){
-				c = temp[m];
-				putchar(' ' <= c && c <= '~'? c: '.');
-			} else
-				putchar(' ');
-		}
-		n -= r;
-		for(; m < 16; ++m )
-			putchar(' ');
-		printf("|\n");
-		if( nr < r )
-			break;
-	}
-}
-
-int
-ppc_inst_dump(unsigned adr, int count)
-{
-	int nr, dotted;
-	unsigned first_adr;
-	unsigned long inst, last_inst = 0;
-	unsigned char val[4];
-
-	dotted = 0;
-	for (first_adr = adr; count > 0; --count, adr += 4){
-		nr = mread(adr, val, 4);
-		if( nr == 0 ){
-			const char *x = fault_chars[fault_type];
-			printf("%.8x  %s%s%s%s\n", adr, x, x, x, x);
-			break;
-		}
-		inst = GETWORD(val);
-		if (adr > first_adr && inst == last_inst) {
-			if (!dotted) {
-				printf(" ...\n");
-				dotted = 1;
-			}
-			continue;
-		}
-		dotted = 0;
-		last_inst = inst;
-		printf("%.8x  ", adr);
-		printf("%.8x\t", inst);
-		print_insn_big_powerpc(stdout, inst, adr);	/* always returns 4 */
-		printf("\n");
-	}
-	return adr - first_adr;
-}
-
-void
-print_address(unsigned addr)
-{
-	printf("0x%x", addr);
-}
-
-/*
- * Memory operations - move, set, print differences
- */
-static unsigned mdest;		/* destination address */
-static unsigned msrc;		/* source address */
-static unsigned mval;		/* byte value to set memory to */
-static unsigned mcount;		/* # bytes to affect */
-static unsigned mdiffs;		/* max # differences to print */
-
-void
-memops(int cmd)
-{
-	scanhex(&mdest);
-	if( termch != '\n' )
-		termch = 0;
-	scanhex(cmd == 's'? &mval: &msrc);
-	if( termch != '\n' )
-		termch = 0;
-	scanhex(&mcount);
-	switch( cmd ){
-	case 'm':
-		memmove((void *)mdest, (void *)msrc, mcount);
-		break;
-	case 's':
-		memset((void *)mdest, mval, mcount);
-		break;
-	case 'd':
-		if( termch != '\n' )
-			termch = 0;
-		scanhex(&mdiffs);
-		memdiffs((unsigned char *)mdest, (unsigned char *)msrc, mcount, mdiffs);
-		break;
-	}
-}
-
-void
-memdiffs(unsigned char *p1, unsigned char *p2, unsigned nb, unsigned maxpr)
-{
-	unsigned n, prt;
-
-	prt = 0;
-	for( n = nb; n > 0; --n )
-		if( *p1++ != *p2++ )
-			if( ++prt <= maxpr )
-				printf("%.8x %.2x # %.8x %.2x\n", (unsigned)p1 - 1,
-					p1[-1], (unsigned)p2 - 1, p2[-1]);
-	if( prt > maxpr )
-		printf("Total of %d differences\n", prt);
-}
-
-static unsigned mend;
-static unsigned mask;
-
-void
-memlocate(void)
-{
-	unsigned a, n;
-	unsigned char val[4];
-
-	last_cmd = "ml";
-	scanhex(&mdest);
-	if (termch != '\n') {
-		termch = 0;
-		scanhex(&mend);
-		if (termch != '\n') {
-			termch = 0;
-			scanhex(&mval);
-			mask = ~0;
-			if (termch != '\n') termch = 0;
-			scanhex(&mask);
-		}
-	}
-	n = 0;
-	for (a = mdest; a < mend; a += 4) {
-		if (mread(a, val, 4) == 4
-			&& ((GETWORD(val) ^ mval) & mask) == 0) {
-			printf("%.8x:  %.8x\n", a, GETWORD(val));
-			if (++n >= 10)
-				break;
-		}
-	}
-}
-
-static unsigned mskip = 0x1000;
-static unsigned mlim = 0xffffffff;
-
-void
-memzcan(void)
-{
-	unsigned char v;
-	unsigned a;
-	int ok, ook;
-
-	scanhex(&mdest);
-	if (termch != '\n') termch = 0;
-	scanhex(&mskip);
-	if (termch != '\n') termch = 0;
-	scanhex(&mlim);
-	ook = 0;
-	for (a = mdest; a < mlim; a += mskip) {
-		ok = mread(a, &v, 1);
-		if (ok && !ook) {
-			printf("%.8x .. ", a);
-			fflush(stdout);
-		} else if (!ok && ook)
-			printf("%.8x\n", a - mskip);
-		ook = ok;
-		if (a + mskip < a)
-			break;
-	}
-	if (ook)
-		printf("%.8x\n", a - mskip);
-}
-
-void proccall(void)
-{
-	unsigned int args[8];
-	unsigned int ret;
-	int i;
-	typedef unsigned int (*callfunc_t)(unsigned int, unsigned int,
-			unsigned int, unsigned int, unsigned int,
-			unsigned int, unsigned int, unsigned int);
-	callfunc_t func;
-
-	scanhex(&adrs);
-	if (termch != '\n')
-		termch = 0;
-	for (i = 0; i < 8; ++i)
-		args[i] = 0;
-	for (i = 0; i < 8; ++i) {
-		if (!scanhex(&args[i]) || termch == '\n')
-			break;
-		termch = 0;
-	}
-	func = (callfunc_t) adrs;
-	ret = 0;
-	if (setjmp(bus_error_jmp) == 0) {
-		debugger_fault_handler = handle_fault;
-		sync();
-		ret = func(args[0], args[1], args[2], args[3],
-			   args[4], args[5], args[6], args[7]);
-		sync();
-		printf("return value is %x\n", ret);
-	} else {
-		printf("*** %x exception occurred\n", fault_except);
-	}
-	debugger_fault_handler = NULL;
-}
-
-/* Input scanning routines */
-int
-skipbl(void)
-{
-	int c;
-
-	if( termch != 0 ){
-		c = termch;
-		termch = 0;
-	} else
-		c = inchar();
-	while( c == ' ' || c == '\t' )
-		c = inchar();
-	return c;
-}
-
-#define N_PTREGS	44
-static char *regnames[N_PTREGS] = {
-	"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
-	"r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
-	"r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
-	"r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
-	"pc", "msr", "or3", "ctr", "lr", "xer", "ccr", "mq",
-	"trap", "dar", "dsisr", "res"
-};
-
-int
-scanhex(unsigned *vp)
-{
-	int c, d;
-	unsigned v;
-
-	c = skipbl();
-	if (c == '%') {
-		/* parse register name */
-		char regname[8];
-		int i;
-
-		for (i = 0; i < sizeof(regname) - 1; ++i) {
-			c = inchar();
-			if (!isalnum(c)) {
-				termch = c;
-				break;
-			}
-			regname[i] = c;
-		}
-		regname[i] = 0;
-		for (i = 0; i < N_PTREGS; ++i) {
-			if (strcmp(regnames[i], regname) == 0) {
-				unsigned *rp = (unsigned *)
-					xmon_regs[smp_processor_id()];
-				if (rp == NULL) {
-					printf("regs not available\n");
-					return 0;
-				}
-				*vp = rp[i];
-				return 1;
-			}
-		}
-		printf("invalid register name '%%%s'\n", regname);
-		return 0;
-	} else if (c == '$') {
-		static char symname[128];
-		int i;
-		for (i=0; i<63; i++) {
-			c = inchar();
-			if (isspace(c)) {
-				termch = c;
-				break;
-			}
-			symname[i] = c;
-		}
-		symname[i++] = 0;
-		*vp = 0;
-		if (setjmp(bus_error_jmp) == 0) {
-			debugger_fault_handler = handle_fault;
-			sync();
-			*vp = kallsyms_lookup_name(symname);
-			sync();
-		}
-		debugger_fault_handler = NULL;
-		if (!(*vp)) {
-			printf("unknown symbol\n");
-			return 0;
-		}
-		return 1;
-	}
-
-	d = hexdigit(c);
-	if( d == EOF ){
-		termch = c;
-		return 0;
-	}
-	v = 0;
-	do {
-		v = (v << 4) + d;
-		c = inchar();
-		d = hexdigit(c);
-	} while( d != EOF );
-	termch = c;
-	*vp = v;
-	return 1;
-}
-
-void
-scannl(void)
-{
-	int c;
-
-	c = termch;
-	termch = 0;
-	while( c != '\n' )
-		c = inchar();
-}
-
-int hexdigit(int c)
-{
-	if( '0' <= c && c <= '9' )
-		return c - '0';
-	if( 'A' <= c && c <= 'F' )
-		return c - ('A' - 10);
-	if( 'a' <= c && c <= 'f' )
-		return c - ('a' - 10);
-	return EOF;
-}
-
-void
-getstring(char *s, int size)
-{
-	int c;
-
-	c = skipbl();
-	do {
-		if( size > 1 ){
-			*s++ = c;
-			--size;
-		}
-		c = inchar();
-	} while( c != ' ' && c != '\t' && c != '\n' );
-	termch = c;
-	*s = 0;
-}
-
-static char line[256];
-static char *lineptr;
-
-void
-flush_input(void)
-{
-	lineptr = NULL;
-}
-
-int
-inchar(void)
-{
-	if (lineptr == NULL || *lineptr == 0) {
-		if (fgets(line, sizeof(line), stdin) == NULL) {
-			lineptr = NULL;
-			return EOF;
-		}
-		lineptr = line;
-	}
-	return *lineptr++;
-}
-
-void
-take_input(char *str)
-{
-	lineptr = str;
-}
-
-static void
-symbol_lookup(void)
-{
-	int type = inchar();
-	unsigned addr;
-	static char tmp[128];
-
-	switch (type) {
-	case 'a':
-		if (scanhex(&addr))
-			xmon_print_symbol(addr, ": ", "\n");
-		termch = 0;
-		break;
-	case 's':
-		getstring(tmp, 64);
-		if (setjmp(bus_error_jmp) == 0) {
-			debugger_fault_handler = handle_fault;
-			sync();
-			addr = kallsyms_lookup_name(tmp);
-			if (addr)
-				printf("%s: %lx\n", tmp, addr);
-			else
-				printf("Symbol '%s' not found.\n", tmp);
-			sync();
-		}
-		debugger_fault_handler = NULL;
-		termch = 0;
-		break;
-	}
-}
-
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 5dc8f8028d52..8d41908e2513 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -289,7 +289,7 @@ config WARN_STACK_SIZE
 	int "Maximum frame size considered safe (128-2048)"
 	range 128 2048
 	depends on WARN_STACK
-	default "256"
+	default "2048"
 	help
 	  This allows you to specify the maximum frame size a function may
 	  have without the compiler complaining about it.
@@ -317,6 +317,9 @@ config ARCH_ENABLE_MEMORY_HOTPLUG
 	def_bool y
 	depends on SPARSEMEM
 
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+	def_bool y
+
 source "mm/Kconfig"
 
 comment "I/O subsystem configuration"
@@ -565,6 +568,7 @@ bool "s390 guest support (EXPERIMENTAL)"
 	depends on 64BIT && EXPERIMENTAL
 	select VIRTIO
 	select VIRTIO_RING
+	select VIRTIO_CONSOLE
 	help
 	  Select this option if you want to run the kernel under s390 linux
 endmenu
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 9cb3d92447a3..a7f8979fb925 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -203,7 +203,7 @@ __appldata_vtimer_setup(int cmd)
 			per_cpu(appldata_timer, i).expires = per_cpu_interval;
 			smp_call_function_single(i, add_virt_timer_periodic,
 						 &per_cpu(appldata_timer, i),
-						 0, 1);
+						 1);
 		}
 		appldata_timer_active = 1;
 		break;
@@ -228,7 +228,7 @@ __appldata_vtimer_setup(int cmd)
 			args.timer = &per_cpu(appldata_timer, i);
 			args.expires = per_cpu_interval;
 			smp_call_function_single(i, __appldata_mod_vtimer_wrap,
-						 &args, 0, 1);
+						 &args, 1);
 		}
 	}
 }
diff --git a/arch/s390/include/asm/Kbuild b/arch/s390/include/asm/Kbuild
new file mode 100644
index 000000000000..63a23415fba6
--- /dev/null
+++ b/arch/s390/include/asm/Kbuild
@@ -0,0 +1,15 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += dasd.h
+header-y += monwriter.h
+header-y += qeth.h
+header-y += tape390.h
+header-y += ucontext.h
+header-y += vtoc.h
+header-y += zcrypt.h
+header-y += chsc.h
+
+unifdef-y += cmb.h
+unifdef-y += debug.h
+unifdef-y += chpid.h
+unifdef-y += schid.h
diff --git a/arch/s390/include/asm/airq.h b/arch/s390/include/asm/airq.h
new file mode 100644
index 000000000000..1ac80d6b0588
--- /dev/null
+++ b/arch/s390/include/asm/airq.h
@@ -0,0 +1,19 @@
+/*
+ *  include/asm-s390/airq.h
+ *
+ *    Copyright IBM Corp. 2002,2007
+ *    Author(s): Ingo Adlung <adlung@de.ibm.com>
+ *		 Cornelia Huck <cornelia.huck@de.ibm.com>
+ *		 Arnd Bergmann <arndb@de.ibm.com>
+ *		 Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_AIRQ_H
+#define _ASM_S390_AIRQ_H
+
+typedef void (*adapter_int_handler_t)(void *, void *);
+
+void *s390_register_adapter_interrupt(adapter_int_handler_t, void *, u8);
+void s390_unregister_adapter_interrupt(void *, u8);
+
+#endif /* _ASM_S390_AIRQ_H */
diff --git a/arch/s390/include/asm/appldata.h b/arch/s390/include/asm/appldata.h
new file mode 100644
index 000000000000..79283dac8281
--- /dev/null
+++ b/arch/s390/include/asm/appldata.h
@@ -0,0 +1,90 @@
+/*
+ * include/asm-s390/appldata.h
+ *
+ * Copyright (C) IBM Corp. 2006
+ *
+ * Author(s): Melissa Howland <melissah@us.ibm.com>
+ */
+
+#ifndef _ASM_S390_APPLDATA_H
+#define _ASM_S390_APPLDATA_H
+
+#include <asm/io.h>
+
+#ifndef CONFIG_64BIT
+
+#define APPLDATA_START_INTERVAL_REC	0x00	/* Function codes for */
+#define APPLDATA_STOP_REC		0x01	/* DIAG 0xDC	      */
+#define APPLDATA_GEN_EVENT_REC		0x02
+#define APPLDATA_START_CONFIG_REC	0x03
+
+/*
+ * Parameter list for DIAGNOSE X'DC'
+ */
+struct appldata_parameter_list {
+	u16 diag;		/* The DIAGNOSE code X'00DC'	      */
+	u8  function;		/* The function code for the DIAGNOSE */
+	u8  parlist_length;	/* Length of the parameter list       */
+	u32 product_id_addr;	/* Address of the 16-byte product ID  */
+	u16 reserved;
+	u16 buffer_length;	/* Length of the application data buffer  */
+	u32 buffer_addr;	/* Address of the application data buffer */
+} __attribute__ ((packed));
+
+#else /* CONFIG_64BIT */
+
+#define APPLDATA_START_INTERVAL_REC	0x80
+#define APPLDATA_STOP_REC		0x81
+#define APPLDATA_GEN_EVENT_REC		0x82
+#define APPLDATA_START_CONFIG_REC	0x83
+
+/*
+ * Parameter list for DIAGNOSE X'DC'
+ */
+struct appldata_parameter_list {
+	u16 diag;
+	u8  function;
+	u8  parlist_length;
+	u32 unused01;
+	u16 reserved;
+	u16 buffer_length;
+	u32 unused02;
+	u64 product_id_addr;
+	u64 buffer_addr;
+} __attribute__ ((packed));
+
+#endif /* CONFIG_64BIT */
+
+struct appldata_product_id {
+	char prod_nr[7];	/* product number */
+	u16  prod_fn;		/* product function */
+	u8   record_nr; 	/* record number */
+	u16  version_nr;	/* version */
+	u16  release_nr;	/* release */
+	u16  mod_lvl;		/* modification level */
+} __attribute__ ((packed));
+
+static inline int appldata_asm(struct appldata_product_id *id,
+			       unsigned short fn, void *buffer,
+			       unsigned short length)
+{
+	struct appldata_parameter_list parm_list;
+	int ry;
+
+	if (!MACHINE_IS_VM)
+		return -ENOSYS;
+	parm_list.diag = 0xdc;
+	parm_list.function = fn;
+	parm_list.parlist_length = sizeof(parm_list);
+	parm_list.buffer_length = length;
+	parm_list.product_id_addr = (unsigned long) id;
+	parm_list.buffer_addr = virt_to_phys(buffer);
+	asm volatile(
+		"	diag	%1,%0,0xdc"
+		: "=d" (ry)
+		: "d" (&parm_list), "m" (parm_list), "m" (*id)
+		: "cc");
+	return ry;
+}
+
+#endif /* _ASM_S390_APPLDATA_H */
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
new file mode 100644
index 000000000000..2d184655bc5d
--- /dev/null
+++ b/arch/s390/include/asm/atomic.h
@@ -0,0 +1,285 @@
+#ifndef __ARCH_S390_ATOMIC__
+#define __ARCH_S390_ATOMIC__
+
+#include <linux/compiler.h>
+
+/*
+ *  include/asm-s390/atomic.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999-2005 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *               Denis Joseph Barrow,
+ *		 Arnd Bergmann (arndb@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/bitops.h"
+ *    Copyright (C) 1992, Linus Torvalds
+ *
+ */
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ * S390 uses 'Compare And Swap' for atomicity in SMP enviroment
+ */
+
+typedef struct {
+	int counter;
+} __attribute__ ((aligned (4))) atomic_t;
+#define ATOMIC_INIT(i)  { (i) }
+
+#ifdef __KERNEL__
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+
+#define __CS_LOOP(ptr, op_val, op_string) ({				\
+	typeof(ptr->counter) old_val, new_val;				\
+	asm volatile(							\
+		"	l	%0,%2\n"				\
+		"0:	lr	%1,%0\n"				\
+		op_string "	%1,%3\n"				\
+		"	cs	%0,%1,%2\n"				\
+		"	jl	0b"					\
+		: "=&d" (old_val), "=&d" (new_val),			\
+		  "=Q" (((atomic_t *)(ptr))->counter)			\
+		: "d" (op_val),	 "Q" (((atomic_t *)(ptr))->counter)	\
+		: "cc", "memory");					\
+	new_val;							\
+})
+
+#else /* __GNUC__ */
+
+#define __CS_LOOP(ptr, op_val, op_string) ({				\
+	typeof(ptr->counter) old_val, new_val;				\
+	asm volatile(							\
+		"	l	%0,0(%3)\n"				\
+		"0:	lr	%1,%0\n"				\
+		op_string "	%1,%4\n"				\
+		"	cs	%0,%1,0(%3)\n"				\
+		"	jl	0b"					\
+		: "=&d" (old_val), "=&d" (new_val),			\
+		  "=m" (((atomic_t *)(ptr))->counter)			\
+		: "a" (ptr), "d" (op_val),				\
+		  "m" (((atomic_t *)(ptr))->counter)			\
+		: "cc", "memory");					\
+	new_val;							\
+})
+
+#endif /* __GNUC__ */
+
+static inline int atomic_read(const atomic_t *v)
+{
+	barrier();
+	return v->counter;
+}
+
+static inline void atomic_set(atomic_t *v, int i)
+{
+	v->counter = i;
+	barrier();
+}
+
+static __inline__ int atomic_add_return(int i, atomic_t * v)
+{
+	return __CS_LOOP(v, i, "ar");
+}
+#define atomic_add(_i, _v)		atomic_add_return(_i, _v)
+#define atomic_add_negative(_i, _v)	(atomic_add_return(_i, _v) < 0)
+#define atomic_inc(_v)			atomic_add_return(1, _v)
+#define atomic_inc_return(_v)		atomic_add_return(1, _v)
+#define atomic_inc_and_test(_v)		(atomic_add_return(1, _v) == 0)
+
+static __inline__ int atomic_sub_return(int i, atomic_t * v)
+{
+	return __CS_LOOP(v, i, "sr");
+}
+#define atomic_sub(_i, _v)		atomic_sub_return(_i, _v)
+#define atomic_sub_and_test(_i, _v)	(atomic_sub_return(_i, _v) == 0)
+#define atomic_dec(_v)			atomic_sub_return(1, _v)
+#define atomic_dec_return(_v)		atomic_sub_return(1, _v)
+#define atomic_dec_and_test(_v)		(atomic_sub_return(1, _v) == 0)
+
+static __inline__ void atomic_clear_mask(unsigned long mask, atomic_t * v)
+{
+	       __CS_LOOP(v, ~mask, "nr");
+}
+
+static __inline__ void atomic_set_mask(unsigned long mask, atomic_t * v)
+{
+	       __CS_LOOP(v, mask, "or");
+}
+
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static __inline__ int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+	asm volatile(
+		"	cs	%0,%2,%1"
+		: "+d" (old), "=Q" (v->counter)
+		: "d" (new), "Q" (v->counter)
+		: "cc", "memory");
+#else /* __GNUC__ */
+	asm volatile(
+		"	cs	%0,%3,0(%2)"
+		: "+d" (old), "=m" (v->counter)
+		: "a" (v), "d" (new), "m" (v->counter)
+		: "cc", "memory");
+#endif /* __GNUC__ */
+	return old;
+}
+
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == u))
+			break;
+		old = atomic_cmpxchg(v, c, c + a);
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != u;
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#undef __CS_LOOP
+
+#ifdef __s390x__
+typedef struct {
+	long long counter;
+} __attribute__ ((aligned (8))) atomic64_t;
+#define ATOMIC64_INIT(i)  { (i) }
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+
+#define __CSG_LOOP(ptr, op_val, op_string) ({				\
+	typeof(ptr->counter) old_val, new_val;				\
+	asm volatile(							\
+		"	lg	%0,%2\n"				\
+		"0:	lgr	%1,%0\n"				\
+		op_string "	%1,%3\n"				\
+		"	csg	%0,%1,%2\n"				\
+		"	jl	0b"					\
+		: "=&d" (old_val), "=&d" (new_val),			\
+		  "=Q" (((atomic_t *)(ptr))->counter)			\
+		: "d" (op_val),	"Q" (((atomic_t *)(ptr))->counter)	\
+		: "cc", "memory" );					\
+	new_val;							\
+})
+
+#else /* __GNUC__ */
+
+#define __CSG_LOOP(ptr, op_val, op_string) ({				\
+	typeof(ptr->counter) old_val, new_val;				\
+	asm volatile(							\
+		"	lg	%0,0(%3)\n"				\
+		"0:	lgr	%1,%0\n"				\
+		op_string "	%1,%4\n"				\
+		"	csg	%0,%1,0(%3)\n"				\
+		"	jl	0b"					\
+		: "=&d" (old_val), "=&d" (new_val),			\
+		  "=m" (((atomic_t *)(ptr))->counter)			\
+		: "a" (ptr), "d" (op_val),				\
+		  "m" (((atomic_t *)(ptr))->counter)			\
+		: "cc", "memory" );					\
+	new_val;							\
+})
+
+#endif /* __GNUC__ */
+
+static inline long long atomic64_read(const atomic64_t *v)
+{
+	barrier();
+	return v->counter;
+}
+
+static inline void atomic64_set(atomic64_t *v, long long i)
+{
+	v->counter = i;
+	barrier();
+}
+
+static __inline__ long long atomic64_add_return(long long i, atomic64_t * v)
+{
+	return __CSG_LOOP(v, i, "agr");
+}
+#define atomic64_add(_i, _v)		atomic64_add_return(_i, _v)
+#define atomic64_add_negative(_i, _v)	(atomic64_add_return(_i, _v) < 0)
+#define atomic64_inc(_v)		atomic64_add_return(1, _v)
+#define atomic64_inc_return(_v)		atomic64_add_return(1, _v)
+#define atomic64_inc_and_test(_v)	(atomic64_add_return(1, _v) == 0)
+
+static __inline__ long long atomic64_sub_return(long long i, atomic64_t * v)
+{
+	return __CSG_LOOP(v, i, "sgr");
+}
+#define atomic64_sub(_i, _v)		atomic64_sub_return(_i, _v)
+#define atomic64_sub_and_test(_i, _v)	(atomic64_sub_return(_i, _v) == 0)
+#define atomic64_dec(_v)		atomic64_sub_return(1, _v)
+#define atomic64_dec_return(_v)		atomic64_sub_return(1, _v)
+#define atomic64_dec_and_test(_v)	(atomic64_sub_return(1, _v) == 0)
+
+static __inline__ void atomic64_clear_mask(unsigned long mask, atomic64_t * v)
+{
+	       __CSG_LOOP(v, ~mask, "ngr");
+}
+
+static __inline__ void atomic64_set_mask(unsigned long mask, atomic64_t * v)
+{
+	       __CSG_LOOP(v, mask, "ogr");
+}
+
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+
+static __inline__ long long atomic64_cmpxchg(atomic64_t *v,
+					     long long old, long long new)
+{
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+	asm volatile(
+		"	csg	%0,%2,%1"
+		: "+d" (old), "=Q" (v->counter)
+		: "d" (new), "Q" (v->counter)
+		: "cc", "memory");
+#else /* __GNUC__ */
+	asm volatile(
+		"	csg	%0,%3,0(%2)"
+		: "+d" (old), "=m" (v->counter)
+		: "a" (v), "d" (new), "m" (v->counter)
+		: "cc", "memory");
+#endif /* __GNUC__ */
+	return old;
+}
+
+static __inline__ int atomic64_add_unless(atomic64_t *v,
+					  long long a, long long u)
+{
+	long long c, old;
+	c = atomic64_read(v);
+	for (;;) {
+		if (unlikely(c == u))
+			break;
+		old = atomic64_cmpxchg(v, c, c + a);
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != u;
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+#undef __CSG_LOOP
+#endif
+
+#define smp_mb__before_atomic_dec()	smp_mb()
+#define smp_mb__after_atomic_dec()	smp_mb()
+#define smp_mb__before_atomic_inc()	smp_mb()
+#define smp_mb__after_atomic_inc()	smp_mb()
+
+#include <asm-generic/atomic.h>
+#endif /* __KERNEL__ */
+#endif /* __ARCH_S390_ATOMIC__  */
diff --git a/arch/s390/include/asm/auxvec.h b/arch/s390/include/asm/auxvec.h
new file mode 100644
index 000000000000..0d340720fd99
--- /dev/null
+++ b/arch/s390/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASMS390_AUXVEC_H
+#define __ASMS390_AUXVEC_H
+
+#endif
diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h
new file mode 100644
index 000000000000..b4eb24ab5af9
--- /dev/null
+++ b/arch/s390/include/asm/bitops.h
@@ -0,0 +1,884 @@
+#ifndef _S390_BITOPS_H
+#define _S390_BITOPS_H
+
+/*
+ *  include/asm-s390/bitops.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/bitops.h"
+ *    Copyright (C) 1992, Linus Torvalds
+ *
+ */
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+
+/*
+ * 32 bit bitops format:
+ * bit 0 is the LSB of *addr; bit 31 is the MSB of *addr;
+ * bit 32 is the LSB of *(addr+4). That combined with the
+ * big endian byte order on S390 give the following bit
+ * order in memory:
+ *    1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10 \
+ *    0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
+ * after that follows the next long with bit numbers
+ *    3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30
+ *    2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20
+ * The reason for this bit ordering is the fact that
+ * in the architecture independent code bits operations
+ * of the form "flags |= (1 << bitnr)" are used INTERMIXED
+ * with operation of the form "set_bit(bitnr, flags)".
+ *
+ * 64 bit bitops format:
+ * bit 0 is the LSB of *addr; bit 63 is the MSB of *addr;
+ * bit 64 is the LSB of *(addr+8). That combined with the
+ * big endian byte order on S390 give the following bit
+ * order in memory:
+ *    3f 3e 3d 3c 3b 3a 39 38 37 36 35 34 33 32 31 30
+ *    2f 2e 2d 2c 2b 2a 29 28 27 26 25 24 23 22 21 20
+ *    1f 1e 1d 1c 1b 1a 19 18 17 16 15 14 13 12 11 10
+ *    0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00
+ * after that follows the next long with bit numbers
+ *    7f 7e 7d 7c 7b 7a 79 78 77 76 75 74 73 72 71 70
+ *    6f 6e 6d 6c 6b 6a 69 68 67 66 65 64 63 62 61 60
+ *    5f 5e 5d 5c 5b 5a 59 58 57 56 55 54 53 52 51 50
+ *    4f 4e 4d 4c 4b 4a 49 48 47 46 45 44 43 42 41 40
+ * The reason for this bit ordering is the fact that
+ * in the architecture independent code bits operations
+ * of the form "flags |= (1 << bitnr)" are used INTERMIXED
+ * with operation of the form "set_bit(bitnr, flags)".
+ */
+
+/* bitmap tables from arch/S390/kernel/bitmap.S */
+extern const char _oi_bitmap[];
+extern const char _ni_bitmap[];
+extern const char _zb_findmap[];
+extern const char _sb_findmap[];
+
+#ifndef __s390x__
+
+#define __BITOPS_ALIGN		3
+#define __BITOPS_WORDSIZE	32
+#define __BITOPS_OR		"or"
+#define __BITOPS_AND		"nr"
+#define __BITOPS_XOR		"xr"
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+
+#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
+	asm volatile(						\
+		"	l	%0,%2\n"			\
+		"0:	lr	%1,%0\n"			\
+		__op_string "	%1,%3\n"			\
+		"	cs	%0,%1,%2\n"			\
+		"	jl	0b"				\
+		: "=&d" (__old), "=&d" (__new),			\
+		  "=Q" (*(unsigned long *) __addr)		\
+		: "d" (__val), "Q" (*(unsigned long *) __addr)	\
+		: "cc");
+
+#else /* __GNUC__ */
+
+#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
+	asm volatile(						\
+		"	l	%0,0(%4)\n"			\
+		"0:	lr	%1,%0\n"			\
+		__op_string "	%1,%3\n"			\
+		"	cs	%0,%1,0(%4)\n"			\
+		"	jl	0b"				\
+		: "=&d" (__old), "=&d" (__new),			\
+		  "=m" (*(unsigned long *) __addr)		\
+		: "d" (__val), "a" (__addr),			\
+		  "m" (*(unsigned long *) __addr) : "cc");
+
+#endif /* __GNUC__ */
+
+#else /* __s390x__ */
+
+#define __BITOPS_ALIGN		7
+#define __BITOPS_WORDSIZE	64
+#define __BITOPS_OR		"ogr"
+#define __BITOPS_AND		"ngr"
+#define __BITOPS_XOR		"xgr"
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+
+#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
+	asm volatile(						\
+		"	lg	%0,%2\n"			\
+		"0:	lgr	%1,%0\n"			\
+		__op_string "	%1,%3\n"			\
+		"	csg	%0,%1,%2\n"			\
+		"	jl	0b"				\
+		: "=&d" (__old), "=&d" (__new),			\
+		  "=Q" (*(unsigned long *) __addr)		\
+		: "d" (__val), "Q" (*(unsigned long *) __addr)	\
+		: "cc");
+
+#else /* __GNUC__ */
+
+#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string)	\
+	asm volatile(						\
+		"	lg	%0,0(%4)\n"			\
+		"0:	lgr	%1,%0\n"			\
+		__op_string "	%1,%3\n"			\
+		"	csg	%0,%1,0(%4)\n"			\
+		"	jl	0b"				\
+		: "=&d" (__old), "=&d" (__new),			\
+		  "=m" (*(unsigned long *) __addr)		\
+		: "d" (__val), "a" (__addr),			\
+		  "m" (*(unsigned long *) __addr) : "cc");
+
+
+#endif /* __GNUC__ */
+
+#endif /* __s390x__ */
+
+#define __BITOPS_WORDS(bits) (((bits)+__BITOPS_WORDSIZE-1)/__BITOPS_WORDSIZE)
+#define __BITOPS_BARRIER() asm volatile("" : : : "memory")
+
+#ifdef CONFIG_SMP
+/*
+ * SMP safe set_bit routine based on compare and swap (CS)
+ */
+static inline void set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make OR mask */
+	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR);
+}
+
+/*
+ * SMP safe clear_bit routine based on compare and swap (CS)
+ */
+static inline void clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make AND mask */
+	mask = ~(1UL << (nr & (__BITOPS_WORDSIZE - 1)));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND);
+}
+
+/*
+ * SMP safe change_bit routine based on compare and swap (CS)
+ */
+static inline void change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make XOR mask */
+	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR);
+}
+
+/*
+ * SMP safe test_and_set_bit routine based on compare and swap (CS)
+ */
+static inline int
+test_and_set_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make OR/test mask */
+	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_OR);
+	__BITOPS_BARRIER();
+	return (old & mask) != 0;
+}
+
+/*
+ * SMP safe test_and_clear_bit routine based on compare and swap (CS)
+ */
+static inline int
+test_and_clear_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make AND/test mask */
+	mask = ~(1UL << (nr & (__BITOPS_WORDSIZE - 1)));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_AND);
+	__BITOPS_BARRIER();
+	return (old ^ new) != 0;
+}
+
+/*
+ * SMP safe test_and_change_bit routine based on compare and swap (CS) 
+ */
+static inline int
+test_and_change_bit_cs(unsigned long nr, volatile unsigned long *ptr)
+{
+        unsigned long addr, old, new, mask;
+
+	addr = (unsigned long) ptr;
+	/* calculate address for CS */
+	addr += (nr ^ (nr & (__BITOPS_WORDSIZE - 1))) >> 3;
+	/* make XOR/test mask */
+	mask = 1UL << (nr & (__BITOPS_WORDSIZE - 1));
+	/* Do the atomic update. */
+	__BITOPS_LOOP(old, new, addr, mask, __BITOPS_XOR);
+	__BITOPS_BARRIER();
+	return (old & mask) != 0;
+}
+#endif /* CONFIG_SMP */
+
+/*
+ * fast, non-SMP set_bit routine
+ */
+static inline void __set_bit(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	asm volatile(
+		"	oc	0(1,%1),0(%2)"
+		: "=m" (*(char *) addr) : "a" (addr),
+		  "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" );
+}
+
+static inline void 
+__constant_set_bit(const unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	*(unsigned char *) addr |= 1 << (nr & 7);
+}
+
+#define set_bit_simple(nr,addr) \
+(__builtin_constant_p((nr)) ? \
+ __constant_set_bit((nr),(addr)) : \
+ __set_bit((nr),(addr)) )
+
+/*
+ * fast, non-SMP clear_bit routine
+ */
+static inline void 
+__clear_bit(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	asm volatile(
+		"	nc	0(1,%1),0(%2)"
+		: "=m" (*(char *) addr)	: "a" (addr),
+		  "a" (_ni_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc");
+}
+
+static inline void 
+__constant_clear_bit(const unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	*(unsigned char *) addr &= ~(1 << (nr & 7));
+}
+
+#define clear_bit_simple(nr,addr) \
+(__builtin_constant_p((nr)) ? \
+ __constant_clear_bit((nr),(addr)) : \
+ __clear_bit((nr),(addr)) )
+
+/* 
+ * fast, non-SMP change_bit routine 
+ */
+static inline void __change_bit(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	asm volatile(
+		"	xc	0(1,%1),0(%2)"
+		:  "=m" (*(char *) addr) : "a" (addr),
+		   "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" );
+}
+
+static inline void 
+__constant_change_bit(const unsigned long nr, volatile unsigned long *ptr) 
+{
+	unsigned long addr;
+
+	addr = ((unsigned long) ptr) + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	*(unsigned char *) addr ^= 1 << (nr & 7);
+}
+
+#define change_bit_simple(nr,addr) \
+(__builtin_constant_p((nr)) ? \
+ __constant_change_bit((nr),(addr)) : \
+ __change_bit((nr),(addr)) )
+
+/*
+ * fast, non-SMP test_and_set_bit routine
+ */
+static inline int
+test_and_set_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+	unsigned char ch;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	ch = *(unsigned char *) addr;
+	asm volatile(
+		"	oc	0(1,%1),0(%2)"
+		: "=m" (*(char *) addr)
+		: "a" (addr), "a" (_oi_bitmap + (nr & 7)),
+		  "m" (*(char *) addr) : "cc", "memory");
+	return (ch >> (nr & 7)) & 1;
+}
+#define __test_and_set_bit(X,Y)		test_and_set_bit_simple(X,Y)
+
+/*
+ * fast, non-SMP test_and_clear_bit routine
+ */
+static inline int
+test_and_clear_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+	unsigned char ch;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	ch = *(unsigned char *) addr;
+	asm volatile(
+		"	nc	0(1,%1),0(%2)"
+		: "=m" (*(char *) addr)
+		: "a" (addr), "a" (_ni_bitmap + (nr & 7)),
+		  "m" (*(char *) addr) : "cc", "memory");
+	return (ch >> (nr & 7)) & 1;
+}
+#define __test_and_clear_bit(X,Y)	test_and_clear_bit_simple(X,Y)
+
+/*
+ * fast, non-SMP test_and_change_bit routine
+ */
+static inline int
+test_and_change_bit_simple(unsigned long nr, volatile unsigned long *ptr)
+{
+	unsigned long addr;
+	unsigned char ch;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	ch = *(unsigned char *) addr;
+	asm volatile(
+		"	xc	0(1,%1),0(%2)"
+		: "=m" (*(char *) addr)
+		: "a" (addr), "a" (_oi_bitmap + (nr & 7)),
+		  "m" (*(char *) addr) : "cc", "memory");
+	return (ch >> (nr & 7)) & 1;
+}
+#define __test_and_change_bit(X,Y)	test_and_change_bit_simple(X,Y)
+
+#ifdef CONFIG_SMP
+#define set_bit             set_bit_cs
+#define clear_bit           clear_bit_cs
+#define change_bit          change_bit_cs
+#define test_and_set_bit    test_and_set_bit_cs
+#define test_and_clear_bit  test_and_clear_bit_cs
+#define test_and_change_bit test_and_change_bit_cs
+#else
+#define set_bit             set_bit_simple
+#define clear_bit           clear_bit_simple
+#define change_bit          change_bit_simple
+#define test_and_set_bit    test_and_set_bit_simple
+#define test_and_clear_bit  test_and_clear_bit_simple
+#define test_and_change_bit test_and_change_bit_simple
+#endif
+
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+
+static inline int __test_bit(unsigned long nr, const volatile unsigned long *ptr)
+{
+	unsigned long addr;
+	unsigned char ch;
+
+	addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3);
+	ch = *(volatile unsigned char *) addr;
+	return (ch >> (nr & 7)) & 1;
+}
+
+static inline int 
+__constant_test_bit(unsigned long nr, const volatile unsigned long *addr) {
+    return (((volatile char *) addr)
+	    [(nr^(__BITOPS_WORDSIZE-8))>>3] & (1<<(nr&7))) != 0;
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p((nr)) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)) )
+
+/*
+ * Optimized find bit helper functions.
+ */
+
+/**
+ * __ffz_word_loop - find byte offset of first long != -1UL
+ * @addr: pointer to array of unsigned long
+ * @size: size of the array in bits
+ */
+static inline unsigned long __ffz_word_loop(const unsigned long *addr,
+					    unsigned long size)
+{
+	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
+	unsigned long bytes = 0;
+
+	asm volatile(
+#ifndef __s390x__
+		"	ahi	%1,-1\n"
+		"	sra	%1,5\n"
+		"	jz	1f\n"
+		"0:	c	%2,0(%0,%3)\n"
+		"	jne	1f\n"
+		"	la	%0,4(%0)\n"
+		"	brct	%1,0b\n"
+		"1:\n"
+#else
+		"	aghi	%1,-1\n"
+		"	srag	%1,%1,6\n"
+		"	jz	1f\n"
+		"0:	cg	%2,0(%0,%3)\n"
+		"	jne	1f\n"
+		"	la	%0,8(%0)\n"
+		"	brct	%1,0b\n"
+		"1:\n"
+#endif
+		: "+&a" (bytes), "+&d" (size)
+		: "d" (-1UL), "a" (addr), "m" (*(addrtype *) addr)
+		: "cc" );
+	return bytes;
+}
+
+/**
+ * __ffs_word_loop - find byte offset of first long != 0UL
+ * @addr: pointer to array of unsigned long
+ * @size: size of the array in bits
+ */
+static inline unsigned long __ffs_word_loop(const unsigned long *addr,
+					    unsigned long size)
+{
+	typedef struct { long _[__BITOPS_WORDS(size)]; } addrtype;
+	unsigned long bytes = 0;
+
+	asm volatile(
+#ifndef __s390x__
+		"	ahi	%1,-1\n"
+		"	sra	%1,5\n"
+		"	jz	1f\n"
+		"0:	c	%2,0(%0,%3)\n"
+		"	jne	1f\n"
+		"	la	%0,4(%0)\n"
+		"	brct	%1,0b\n"
+		"1:\n"
+#else
+		"	aghi	%1,-1\n"
+		"	srag	%1,%1,6\n"
+		"	jz	1f\n"
+		"0:	cg	%2,0(%0,%3)\n"
+		"	jne	1f\n"
+		"	la	%0,8(%0)\n"
+		"	brct	%1,0b\n"
+		"1:\n"
+#endif
+		: "+&a" (bytes), "+&a" (size)
+		: "d" (0UL), "a" (addr), "m" (*(addrtype *) addr)
+		: "cc" );
+	return bytes;
+}
+
+/**
+ * __ffz_word - add number of the first unset bit
+ * @nr: base value the bit number is added to
+ * @word: the word that is searched for unset bits
+ */
+static inline unsigned long __ffz_word(unsigned long nr, unsigned long word)
+{
+#ifdef __s390x__
+	if (likely((word & 0xffffffff) == 0xffffffff)) {
+		word >>= 32;
+		nr += 32;
+	}
+#endif
+	if (likely((word & 0xffff) == 0xffff)) {
+		word >>= 16;
+		nr += 16;
+	}
+	if (likely((word & 0xff) == 0xff)) {
+		word >>= 8;
+		nr += 8;
+	}
+	return nr + _zb_findmap[(unsigned char) word];
+}
+
+/**
+ * __ffs_word - add number of the first set bit
+ * @nr: base value the bit number is added to
+ * @word: the word that is searched for set bits
+ */
+static inline unsigned long __ffs_word(unsigned long nr, unsigned long word)
+{
+#ifdef __s390x__
+	if (likely((word & 0xffffffff) == 0)) {
+		word >>= 32;
+		nr += 32;
+	}
+#endif
+	if (likely((word & 0xffff) == 0)) {
+		word >>= 16;
+		nr += 16;
+	}
+	if (likely((word & 0xff) == 0)) {
+		word >>= 8;
+		nr += 8;
+	}
+	return nr + _sb_findmap[(unsigned char) word];
+}
+
+
+/**
+ * __load_ulong_be - load big endian unsigned long
+ * @p: pointer to array of unsigned long
+ * @offset: byte offset of source value in the array
+ */
+static inline unsigned long __load_ulong_be(const unsigned long *p,
+					    unsigned long offset)
+{
+	p = (unsigned long *)((unsigned long) p + offset);
+	return *p;
+}
+
+/**
+ * __load_ulong_le - load little endian unsigned long
+ * @p: pointer to array of unsigned long
+ * @offset: byte offset of source value in the array
+ */
+static inline unsigned long __load_ulong_le(const unsigned long *p,
+					    unsigned long offset)
+{
+	unsigned long word;
+
+	p = (unsigned long *)((unsigned long) p + offset);
+#ifndef __s390x__
+	asm volatile(
+		"	ic	%0,0(%1)\n"
+		"	icm	%0,2,1(%1)\n"
+		"	icm	%0,4,2(%1)\n"
+		"	icm	%0,8,3(%1)"
+		: "=&d" (word) : "a" (p), "m" (*p) : "cc");
+#else
+	asm volatile(
+		"	lrvg	%0,%1"
+		: "=d" (word) : "m" (*p) );
+#endif
+	return word;
+}
+
+/*
+ * The various find bit functions.
+ */
+
+/*
+ * ffz - find first zero in word.
+ * @word: The word to search
+ *
+ * Undefined if no zero exists, so code should check against ~0UL first.
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+	return __ffz_word(0, word);
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs (unsigned long word)
+{
+	return __ffs_word(0, word);
+}
+
+/**
+ * ffs - find first bit set
+ * @x: the word to search
+ *
+ * This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+static inline int ffs(int x)
+{
+	if (!x)
+		return 0;
+	return __ffs_word(1, x);
+}
+
+/**
+ * find_first_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first zero bit, not the number of the byte
+ * containing a bit.
+ */
+static inline unsigned long find_first_zero_bit(const unsigned long *addr,
+						unsigned long size)
+{
+	unsigned long bytes, bits;
+
+        if (!size)
+                return 0;
+	bytes = __ffz_word_loop(addr, size);
+	bits = __ffz_word(bytes*8, __load_ulong_be(addr, bytes));
+	return (bits < size) ? bits : size;
+}
+
+/**
+ * find_first_bit - find the first set bit in a memory region
+ * @addr: The address to start the search at
+ * @size: The maximum size to search
+ *
+ * Returns the bit-number of the first set bit, not the number of the byte
+ * containing a bit.
+ */
+static inline unsigned long find_first_bit(const unsigned long * addr,
+					   unsigned long size)
+{
+	unsigned long bytes, bits;
+
+        if (!size)
+                return 0;
+	bytes = __ffs_word_loop(addr, size);
+	bits = __ffs_word(bytes*8, __load_ulong_be(addr, bytes));
+	return (bits < size) ? bits : size;
+}
+
+/**
+ * find_next_zero_bit - find the first zero bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+static inline int find_next_zero_bit (const unsigned long * addr,
+				      unsigned long size,
+				      unsigned long offset)
+{
+        const unsigned long *p;
+	unsigned long bit, set;
+
+	if (offset >= size)
+		return size;
+	bit = offset & (__BITOPS_WORDSIZE - 1);
+	offset -= bit;
+	size -= offset;
+	p = addr + offset / __BITOPS_WORDSIZE;
+	if (bit) {
+		/*
+		 * __ffz_word returns __BITOPS_WORDSIZE
+		 * if no zero bit is present in the word.
+		 */
+		set = __ffz_word(0, *p >> bit) + bit;
+		if (set >= size)
+			return size + offset;
+		if (set < __BITOPS_WORDSIZE)
+			return set + offset;
+		offset += __BITOPS_WORDSIZE;
+		size -= __BITOPS_WORDSIZE;
+		p++;
+	}
+	return offset + find_first_zero_bit(p, size);
+}
+
+/**
+ * find_next_bit - find the first set bit in a memory region
+ * @addr: The address to base the search on
+ * @offset: The bitnumber to start searching at
+ * @size: The maximum size to search
+ */
+static inline int find_next_bit (const unsigned long * addr,
+				 unsigned long size,
+				 unsigned long offset)
+{
+        const unsigned long *p;
+	unsigned long bit, set;
+
+	if (offset >= size)
+		return size;
+	bit = offset & (__BITOPS_WORDSIZE - 1);
+	offset -= bit;
+	size -= offset;
+	p = addr + offset / __BITOPS_WORDSIZE;
+	if (bit) {
+		/*
+		 * __ffs_word returns __BITOPS_WORDSIZE
+		 * if no one bit is present in the word.
+		 */
+		set = __ffs_word(0, *p & (~0UL << bit));
+		if (set >= size)
+			return size + offset;
+		if (set < __BITOPS_WORDSIZE)
+			return set + offset;
+		offset += __BITOPS_WORDSIZE;
+		size -= __BITOPS_WORDSIZE;
+		p++;
+	}
+	return offset + find_first_bit(p, size);
+}
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is cleared.
+ */
+static inline int sched_find_first_bit(unsigned long *b)
+{
+	return find_first_bit(b, 140);
+}
+
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+/*
+ * ATTENTION: intel byte ordering convention for ext2 and minix !!
+ * bit 0 is the LSB of addr; bit 31 is the MSB of addr;
+ * bit 32 is the LSB of (addr+4).
+ * That combined with the little endian byte order of Intel gives the
+ * following bit order in memory:
+ *    07 06 05 04 03 02 01 00 15 14 13 12 11 10 09 08 \
+ *    23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24
+ */
+
+#define ext2_set_bit(nr, addr)       \
+	__test_and_set_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+#define ext2_set_bit_atomic(lock, nr, addr)       \
+	test_and_set_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+#define ext2_clear_bit(nr, addr)     \
+	__test_and_clear_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+#define ext2_clear_bit_atomic(lock, nr, addr)     \
+	test_and_clear_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+#define ext2_test_bit(nr, addr)      \
+	test_bit((nr)^(__BITOPS_WORDSIZE - 8), (unsigned long *)addr)
+
+static inline int ext2_find_first_zero_bit(void *vaddr, unsigned int size)
+{
+	unsigned long bytes, bits;
+
+        if (!size)
+                return 0;
+	bytes = __ffz_word_loop(vaddr, size);
+	bits = __ffz_word(bytes*8, __load_ulong_le(vaddr, bytes));
+	return (bits < size) ? bits : size;
+}
+
+static inline int ext2_find_next_zero_bit(void *vaddr, unsigned long size,
+					  unsigned long offset)
+{
+        unsigned long *addr = vaddr, *p;
+	unsigned long bit, set;
+
+        if (offset >= size)
+                return size;
+	bit = offset & (__BITOPS_WORDSIZE - 1);
+	offset -= bit;
+	size -= offset;
+	p = addr + offset / __BITOPS_WORDSIZE;
+        if (bit) {
+		/*
+		 * s390 version of ffz returns __BITOPS_WORDSIZE
+		 * if no zero bit is present in the word.
+		 */
+		set = ffz(__load_ulong_le(p, 0) >> bit) + bit;
+		if (set >= size)
+			return size + offset;
+		if (set < __BITOPS_WORDSIZE)
+			return set + offset;
+		offset += __BITOPS_WORDSIZE;
+		size -= __BITOPS_WORDSIZE;
+		p++;
+        }
+	return offset + ext2_find_first_zero_bit(p, size);
+}
+
+static inline unsigned long ext2_find_first_bit(void *vaddr,
+						unsigned long size)
+{
+	unsigned long bytes, bits;
+
+	if (!size)
+		return 0;
+	bytes = __ffs_word_loop(vaddr, size);
+	bits = __ffs_word(bytes*8, __load_ulong_le(vaddr, bytes));
+	return (bits < size) ? bits : size;
+}
+
+static inline int ext2_find_next_bit(void *vaddr, unsigned long size,
+				     unsigned long offset)
+{
+	unsigned long *addr = vaddr, *p;
+	unsigned long bit, set;
+
+	if (offset >= size)
+		return size;
+	bit = offset & (__BITOPS_WORDSIZE - 1);
+	offset -= bit;
+	size -= offset;
+	p = addr + offset / __BITOPS_WORDSIZE;
+	if (bit) {
+		/*
+		 * s390 version of ffz returns __BITOPS_WORDSIZE
+		 * if no zero bit is present in the word.
+		 */
+		set = ffs(__load_ulong_le(p, 0) >> bit) + bit;
+		if (set >= size)
+			return size + offset;
+		if (set < __BITOPS_WORDSIZE)
+			return set + offset;
+		offset += __BITOPS_WORDSIZE;
+		size -= __BITOPS_WORDSIZE;
+		p++;
+	}
+	return offset + ext2_find_first_bit(p, size);
+}
+
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* _S390_BITOPS_H */
diff --git a/arch/s390/include/asm/bug.h b/arch/s390/include/asm/bug.h
new file mode 100644
index 000000000000..384e3621e341
--- /dev/null
+++ b/arch/s390/include/asm/bug.h
@@ -0,0 +1,70 @@
+#ifndef _ASM_S390_BUG_H
+#define _ASM_S390_BUG_H
+
+#include <linux/kernel.h>
+
+#ifdef CONFIG_BUG
+
+#ifdef CONFIG_64BIT
+#define S390_LONG ".quad"
+#else
+#define S390_LONG ".long"
+#endif
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+
+#define __EMIT_BUG(x) do {					\
+	asm volatile(						\
+		"0:	j	0b+2\n"				\
+		"1:\n"						\
+		".section .rodata.str,\"aMS\",@progbits,1\n"	\
+		"2:	.asciz	\""__FILE__"\"\n"		\
+		".previous\n"					\
+		".section __bug_table,\"a\"\n"			\
+		"3:\t"	S390_LONG "\t1b,2b\n"			\
+		"	.short	%0,%1\n"			\
+		"	.org	3b+%2\n"			\
+		".previous\n"					\
+		: : "i" (__LINE__),				\
+		    "i" (x),					\
+		    "i" (sizeof(struct bug_entry)));		\
+} while (0)
+
+#else /* CONFIG_DEBUG_BUGVERBOSE */
+
+#define __EMIT_BUG(x) do {				\
+	asm volatile(					\
+		"0:	j	0b+2\n"			\
+		"1:\n"					\
+		".section __bug_table,\"a\"\n"		\
+		"2:\t"	S390_LONG "\t1b\n"		\
+		"	.short	%0\n"			\
+		"	.org	2b+%1\n"		\
+		".previous\n"				\
+		: : "i" (x),				\
+		    "i" (sizeof(struct bug_entry)));	\
+} while (0)
+
+#endif /* CONFIG_DEBUG_BUGVERBOSE */
+
+#define BUG()	__EMIT_BUG(0)
+
+#define WARN_ON(x) ({					\
+	int __ret_warn_on = !!(x);			\
+	if (__builtin_constant_p(__ret_warn_on)) {	\
+		if (__ret_warn_on)			\
+			__EMIT_BUG(BUGFLAG_WARNING);	\
+	} else {					\
+		if (unlikely(__ret_warn_on))		\
+			__EMIT_BUG(BUGFLAG_WARNING);	\
+	}						\
+	unlikely(__ret_warn_on);			\
+})
+
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_WARN_ON
+#endif /* CONFIG_BUG */
+
+#include <asm-generic/bug.h>
+
+#endif /* _ASM_S390_BUG_H */
diff --git a/arch/s390/include/asm/bugs.h b/arch/s390/include/asm/bugs.h
new file mode 100644
index 000000000000..011f1e6a2a6c
--- /dev/null
+++ b/arch/s390/include/asm/bugs.h
@@ -0,0 +1,22 @@
+/*
+ *  include/asm-s390/bugs.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/bugs.h"
+ *    Copyright (C) 1994  Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *      void check_bugs(void);
+ */
+
+static inline void check_bugs(void)
+{
+  /* s390 has no bugs ... */
+}
diff --git a/arch/s390/include/asm/byteorder.h b/arch/s390/include/asm/byteorder.h
new file mode 100644
index 000000000000..1fe2492baa8d
--- /dev/null
+++ b/arch/s390/include/asm/byteorder.h
@@ -0,0 +1,125 @@
+#ifndef _S390_BYTEORDER_H
+#define _S390_BYTEORDER_H
+
+/*
+ *  include/asm-s390/byteorder.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ */
+
+#include <asm/types.h>
+
+#ifdef __GNUC__
+
+#ifdef __s390x__
+static inline __u64 ___arch__swab64p(const __u64 *x)
+{
+	__u64 result;
+
+	asm volatile("lrvg %0,%1" : "=d" (result) : "m" (*x));
+	return result;
+}
+
+static inline __u64 ___arch__swab64(__u64 x)
+{
+	__u64 result;
+
+	asm volatile("lrvgr %0,%1" : "=d" (result) : "d" (x));
+	return result;
+}
+
+static inline void ___arch__swab64s(__u64 *x)
+{
+	*x = ___arch__swab64p(x);
+}
+#endif /* __s390x__ */
+
+static inline __u32 ___arch__swab32p(const __u32 *x)
+{
+	__u32 result;
+	
+	asm volatile(
+#ifndef __s390x__
+		"	icm	%0,8,3(%1)\n"
+		"	icm	%0,4,2(%1)\n"
+		"	icm	%0,2,1(%1)\n"
+		"	ic	%0,0(%1)"
+		: "=&d" (result) : "a" (x), "m" (*x) : "cc");
+#else /* __s390x__ */
+		"	lrv	%0,%1"
+		: "=d" (result) : "m" (*x));
+#endif /* __s390x__ */
+	return result;
+}
+
+static inline __u32 ___arch__swab32(__u32 x)
+{
+#ifndef __s390x__
+	return ___arch__swab32p(&x);
+#else /* __s390x__ */
+	__u32 result;
+	
+	asm volatile("lrvr  %0,%1" : "=d" (result) : "d" (x));
+	return result;
+#endif /* __s390x__ */
+}
+
+static __inline__ void ___arch__swab32s(__u32 *x)
+{
+	*x = ___arch__swab32p(x);
+}
+
+static __inline__ __u16 ___arch__swab16p(const __u16 *x)
+{
+	__u16 result;
+	
+	asm volatile(
+#ifndef __s390x__
+		"	icm	%0,2,1(%1)\n"
+		"	ic	%0,0(%1)\n"
+		: "=&d" (result) : "a" (x), "m" (*x) : "cc");
+#else /* __s390x__ */
+		"	lrvh	%0,%1"
+		: "=d" (result) : "m" (*x));
+#endif /* __s390x__ */
+	return result;
+}
+
+static __inline__ __u16 ___arch__swab16(__u16 x)
+{
+	return ___arch__swab16p(&x);
+}
+
+static __inline__ void ___arch__swab16s(__u16 *x)
+{
+	*x = ___arch__swab16p(x);
+}
+
+#ifdef __s390x__
+#define __arch__swab64(x) ___arch__swab64(x)
+#define __arch__swab64p(x) ___arch__swab64p(x)
+#define __arch__swab64s(x) ___arch__swab64s(x)
+#endif /* __s390x__ */
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab16(x) ___arch__swab16(x)
+#define __arch__swab32p(x) ___arch__swab32p(x)
+#define __arch__swab16p(x) ___arch__swab16p(x)
+#define __arch__swab32s(x) ___arch__swab32s(x)
+#define __arch__swab16s(x) ___arch__swab16s(x)
+
+#ifndef __s390x__
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+#else /* __s390x__ */
+#define __BYTEORDER_HAS_U64__
+#endif /* __s390x__ */
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _S390_BYTEORDER_H */
diff --git a/arch/s390/include/asm/cache.h b/arch/s390/include/asm/cache.h
new file mode 100644
index 000000000000..9b866816863c
--- /dev/null
+++ b/arch/s390/include/asm/cache.h
@@ -0,0 +1,19 @@
+/*
+ *  include/asm-s390/cache.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *
+ *  Derived from "include/asm-i386/cache.h"
+ *    Copyright (C) 1992, Linus Torvalds
+ */
+
+#ifndef __ARCH_S390_CACHE_H
+#define __ARCH_S390_CACHE_H
+
+#define L1_CACHE_BYTES     256
+#define L1_CACHE_SHIFT     8
+
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
+#endif
diff --git a/arch/s390/include/asm/cacheflush.h b/arch/s390/include/asm/cacheflush.h
new file mode 100644
index 000000000000..49d5af916d01
--- /dev/null
+++ b/arch/s390/include/asm/cacheflush.h
@@ -0,0 +1,31 @@
+#ifndef _S390_CACHEFLUSH_H
+#define _S390_CACHEFLUSH_H
+
+/* Keep includes the same across arches.  */
+#include <linux/mm.h>
+
+/* Caches aren't brain-dead on the s390. */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+void kernel_map_pages(struct page *page, int numpages, int enable);
+#endif
+
+#endif /* _S390_CACHEFLUSH_H */
diff --git a/arch/s390/include/asm/ccwdev.h b/arch/s390/include/asm/ccwdev.h
new file mode 100644
index 000000000000..ba007d8df941
--- /dev/null
+++ b/arch/s390/include/asm/ccwdev.h
@@ -0,0 +1,192 @@
+/*
+ *  include/asm-s390/ccwdev.h
+ *  include/asm-s390x/ccwdev.h
+ *
+ *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Arnd Bergmann <arndb@de.ibm.com>
+ *
+ *  Interface for CCW device drivers
+ */
+#ifndef _S390_CCWDEV_H_
+#define _S390_CCWDEV_H_
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <asm/fcx.h>
+
+/* structs from asm/cio.h */
+struct irb;
+struct ccw1;
+struct ccw_dev_id;
+
+/* simplified initializers for struct ccw_device:
+ * CCW_DEVICE and CCW_DEVICE_DEVTYPE initialize one
+ * entry in your MODULE_DEVICE_TABLE and set the match_flag correctly */
+#define CCW_DEVICE(cu, cum) 						\
+	.cu_type=(cu), .cu_model=(cum),					\
+	.match_flags=(CCW_DEVICE_ID_MATCH_CU_TYPE			\
+		   | (cum ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0))
+
+#define CCW_DEVICE_DEVTYPE(cu, cum, dev, devm)				\
+	.cu_type=(cu), .cu_model=(cum), .dev_type=(dev), .dev_model=(devm),\
+	.match_flags=CCW_DEVICE_ID_MATCH_CU_TYPE			\
+		   | ((cum) ? CCW_DEVICE_ID_MATCH_CU_MODEL : 0) 	\
+		   | CCW_DEVICE_ID_MATCH_DEVICE_TYPE			\
+		   | ((devm) ? CCW_DEVICE_ID_MATCH_DEVICE_MODEL : 0)
+
+/* scan through an array of device ids and return the first
+ * entry that matches the device.
+ *
+ * the array must end with an entry containing zero match_flags
+ */
+static inline const struct ccw_device_id *
+ccw_device_id_match(const struct ccw_device_id *array,
+			const struct ccw_device_id *match)
+{
+	const struct ccw_device_id *id = array;
+
+	for (id = array; id->match_flags; id++) {
+		if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_TYPE)
+		    && (id->cu_type != match->cu_type))
+			continue;
+
+		if ((id->match_flags & CCW_DEVICE_ID_MATCH_CU_MODEL)
+		    && (id->cu_model != match->cu_model))
+			continue;
+
+		if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_TYPE)
+		    && (id->dev_type != match->dev_type))
+			continue;
+
+		if ((id->match_flags & CCW_DEVICE_ID_MATCH_DEVICE_MODEL)
+		    && (id->dev_model != match->dev_model))
+			continue;
+
+		return id;
+	}
+
+	return NULL;
+}
+
+/**
+ * struct ccw_device - channel attached device
+ * @ccwlock: pointer to device lock
+ * @id: id of this device
+ * @drv: ccw driver for this device
+ * @dev: embedded device structure
+ * @online: online status of device
+ * @handler: interrupt handler
+ *
+ * @handler is a member of the device rather than the driver since a driver
+ * can have different interrupt handlers for different ccw devices
+ * (multi-subchannel drivers).
+ */
+struct ccw_device {
+	spinlock_t *ccwlock;
+/* private: */
+	struct ccw_device_private *private;	/* cio private information */
+/* public: */
+	struct ccw_device_id id;
+	struct ccw_driver *drv;
+	struct device dev;
+	int online;
+	void (*handler) (struct ccw_device *, unsigned long, struct irb *);
+};
+
+
+/**
+ * struct ccw driver - device driver for channel attached devices
+ * @owner: owning module
+ * @ids: ids supported by this driver
+ * @probe: function called on probe
+ * @remove: function called on remove
+ * @set_online: called when setting device online
+ * @set_offline: called when setting device offline
+ * @notify: notify driver of device state changes
+ * @shutdown: called at device shutdown
+ * @driver: embedded device driver structure
+ * @name: device driver name
+ */
+struct ccw_driver {
+	struct module *owner;
+	struct ccw_device_id *ids;
+	int (*probe) (struct ccw_device *);
+	void (*remove) (struct ccw_device *);
+	int (*set_online) (struct ccw_device *);
+	int (*set_offline) (struct ccw_device *);
+	int (*notify) (struct ccw_device *, int);
+	void (*shutdown) (struct ccw_device *);
+	struct device_driver driver;
+	char *name;
+};
+
+extern struct ccw_device *get_ccwdev_by_busid(struct ccw_driver *cdrv,
+					      const char *bus_id);
+
+/* devices drivers call these during module load and unload.
+ * When a driver is registered, its probe method is called
+ * when new devices for its type pop up */
+extern int  ccw_driver_register   (struct ccw_driver *driver);
+extern void ccw_driver_unregister (struct ccw_driver *driver);
+
+struct ccw1;
+
+extern int ccw_device_set_options_mask(struct ccw_device *, unsigned long);
+extern int ccw_device_set_options(struct ccw_device *, unsigned long);
+extern void ccw_device_clear_options(struct ccw_device *, unsigned long);
+
+/* Allow for i/o completion notification after primary interrupt status. */
+#define CCWDEV_EARLY_NOTIFICATION	0x0001
+/* Report all interrupt conditions. */
+#define CCWDEV_REPORT_ALL	 	0x0002
+/* Try to perform path grouping. */
+#define CCWDEV_DO_PATHGROUP             0x0004
+/* Allow forced onlining of boxed devices. */
+#define CCWDEV_ALLOW_FORCE              0x0008
+
+extern int ccw_device_start(struct ccw_device *, struct ccw1 *,
+			    unsigned long, __u8, unsigned long);
+extern int ccw_device_start_timeout(struct ccw_device *, struct ccw1 *,
+				    unsigned long, __u8, unsigned long, int);
+extern int ccw_device_start_key(struct ccw_device *, struct ccw1 *,
+				unsigned long, __u8, __u8, unsigned long);
+extern int ccw_device_start_timeout_key(struct ccw_device *, struct ccw1 *,
+					unsigned long, __u8, __u8,
+					unsigned long, int);
+
+
+extern int ccw_device_resume(struct ccw_device *);
+extern int ccw_device_halt(struct ccw_device *, unsigned long);
+extern int ccw_device_clear(struct ccw_device *, unsigned long);
+int ccw_device_tm_start_key(struct ccw_device *cdev, struct tcw *tcw,
+			    unsigned long intparm, u8 lpm, u8 key);
+int ccw_device_tm_start_key(struct ccw_device *, struct tcw *,
+			    unsigned long, u8, u8);
+int ccw_device_tm_start_timeout_key(struct ccw_device *, struct tcw *,
+			    unsigned long, u8, u8, int);
+int ccw_device_tm_start(struct ccw_device *, struct tcw *,
+			    unsigned long, u8);
+int ccw_device_tm_start_timeout(struct ccw_device *, struct tcw *,
+			    unsigned long, u8, int);
+int ccw_device_tm_intrg(struct ccw_device *cdev);
+
+extern int ccw_device_set_online(struct ccw_device *cdev);
+extern int ccw_device_set_offline(struct ccw_device *cdev);
+
+
+extern struct ciw *ccw_device_get_ciw(struct ccw_device *, __u32 cmd);
+extern __u8 ccw_device_get_path_mask(struct ccw_device *);
+extern void ccw_device_get_id(struct ccw_device *, struct ccw_dev_id *);
+
+#define get_ccwdev_lock(x) (x)->ccwlock
+
+#define to_ccwdev(n) container_of(n, struct ccw_device, dev)
+#define to_ccwdrv(n) container_of(n, struct ccw_driver, driver)
+
+extern struct ccw_device *ccw_device_probe_console(void);
+
+// FIXME: these have to go
+extern int _ccw_device_get_subchannel_number(struct ccw_device *);
+
+extern void *ccw_device_get_chp_desc(struct ccw_device *, int);
+#endif /* _S390_CCWDEV_H_ */
diff --git a/arch/s390/include/asm/ccwgroup.h b/arch/s390/include/asm/ccwgroup.h
new file mode 100644
index 000000000000..a27f68985a79
--- /dev/null
+++ b/arch/s390/include/asm/ccwgroup.h
@@ -0,0 +1,69 @@
+#ifndef S390_CCWGROUP_H
+#define S390_CCWGROUP_H
+
+struct ccw_device;
+struct ccw_driver;
+
+/**
+ * struct ccwgroup_device - ccw group device
+ * @creator_id: unique number of the driver
+ * @state: online/offline state
+ * @count: number of attached slave devices
+ * @dev: embedded device structure
+ * @cdev: variable number of slave devices, allocated as needed
+ */
+struct ccwgroup_device {
+	unsigned long creator_id;
+	enum {
+		CCWGROUP_OFFLINE,
+		CCWGROUP_ONLINE,
+	} state;
+/* private: */
+	atomic_t onoff;
+	struct mutex reg_mutex;
+/* public: */
+	unsigned int count;
+	struct device	dev;
+	struct ccw_device *cdev[0];
+};
+
+/**
+ * struct ccwgroup_driver - driver for ccw group devices
+ * @owner: driver owner
+ * @name: driver name
+ * @max_slaves: maximum number of slave devices
+ * @driver_id: unique id
+ * @probe: function called on probe
+ * @remove: function called on remove
+ * @set_online: function called when device is set online
+ * @set_offline: function called when device is set offline
+ * @shutdown: function called when device is shut down
+ * @driver: embedded driver structure
+ */
+struct ccwgroup_driver {
+	struct module *owner;
+	char *name;
+	int max_slaves;
+	unsigned long driver_id;
+
+	int (*probe) (struct ccwgroup_device *);
+	void (*remove) (struct ccwgroup_device *);
+	int (*set_online) (struct ccwgroup_device *);
+	int (*set_offline) (struct ccwgroup_device *);
+	void (*shutdown)(struct ccwgroup_device *);
+
+	struct device_driver driver;
+};
+
+extern int  ccwgroup_driver_register   (struct ccwgroup_driver *cdriver);
+extern void ccwgroup_driver_unregister (struct ccwgroup_driver *cdriver);
+int ccwgroup_create_from_string(struct device *root, unsigned int creator_id,
+				struct ccw_driver *cdrv, int num_devices,
+				const char *buf);
+
+extern int ccwgroup_probe_ccwdev(struct ccw_device *cdev);
+extern void ccwgroup_remove_ccwdev(struct ccw_device *cdev);
+
+#define to_ccwgroupdev(x) container_of((x), struct ccwgroup_device, dev)
+#define to_ccwgroupdrv(x) container_of((x), struct ccwgroup_driver, driver)
+#endif
diff --git a/arch/s390/include/asm/checksum.h b/arch/s390/include/asm/checksum.h
new file mode 100644
index 000000000000..d5a8e7c1477c
--- /dev/null
+++ b/arch/s390/include/asm/checksum.h
@@ -0,0 +1,166 @@
+#ifndef _S390_CHECKSUM_H
+#define _S390_CHECKSUM_H
+
+/*
+ *  include/asm-s390/checksum.h
+ *    S390 fast network checksum routines
+ *    see also arch/S390/lib/checksum.c
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Ulrich Hild        (first version)
+ *               Martin Schwidefsky (heavily optimized CKSM version)
+ *               D.J. Barrow        (third attempt) 
+ */
+
+#include <asm/uaccess.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+static inline __wsum
+csum_partial(const void *buff, int len, __wsum sum)
+{
+	register unsigned long reg2 asm("2") = (unsigned long) buff;
+	register unsigned long reg3 asm("3") = (unsigned long) len;
+
+	asm volatile(
+		"0:	cksm	%0,%1\n"	/* do checksum on longs */
+		"	jo	0b\n"
+		: "+d" (sum), "+d" (reg2), "+d" (reg3) : : "cc", "memory");
+	return sum;
+}
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ *
+ * Copy from userspace and compute checksum.  If we catch an exception
+ * then zero the rest of the buffer.
+ */
+static inline __wsum
+csum_partial_copy_from_user(const void __user *src, void *dst,
+                                          int len, __wsum sum,
+                                          int *err_ptr)
+{
+	int missing;
+
+	missing = copy_from_user(dst, src, len);
+	if (missing) {
+		memset(dst + len - missing, 0, missing);
+		*err_ptr = -EFAULT;
+	}
+		
+	return csum_partial(dst, len, sum);
+}
+
+
+static inline __wsum
+csum_partial_copy_nocheck (const void *src, void *dst, int len, __wsum sum)
+{
+        memcpy(dst,src,len);
+	return csum_partial(dst, len, sum);
+}
+
+/*
+ *      Fold a partial checksum without adding pseudo headers
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+#ifndef __s390x__
+	register_pair rp;
+
+	asm volatile(
+		"	slr	%N1,%N1\n"	/* %0 = H L */
+		"	lr	%1,%0\n"	/* %0 = H L, %1 = H L 0 0 */
+		"	srdl	%1,16\n"	/* %0 = H L, %1 = 0 H L 0 */
+		"	alr	%1,%N1\n"	/* %0 = H L, %1 = L H L 0 */
+		"	alr	%0,%1\n"	/* %0 = H+L+C L+H */
+		"	srl	%0,16\n"	/* %0 = H+L+C */
+		: "+&d" (sum), "=d" (rp) : : "cc");
+#else /* __s390x__ */
+	asm volatile(
+		"	sr	3,3\n"		/* %0 = H*65536 + L */
+		"	lr	2,%0\n"		/* %0 = H L, 2/3 = H L / 0 0 */
+		"	srdl	2,16\n"		/* %0 = H L, 2/3 = 0 H / L 0 */
+		"	alr	2,3\n"		/* %0 = H L, 2/3 = L H / L 0 */
+		"	alr	%0,2\n"		/* %0 = H+L+C L+H */
+		"	srl	%0,16\n"	/* %0 = H+L+C */
+		: "+&d" (sum) : : "cc", "2", "3");
+#endif /* __s390x__ */
+	return (__force __sum16) ~sum;
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	return csum_fold(csum_partial(iph, ihl*4, 0));
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 32-bit checksum
+ */
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+                   unsigned short len, unsigned short proto,
+                   __wsum sum)
+{
+	__u32 csum = (__force __u32)sum;
+
+	csum += (__force __u32)saddr;
+	if (csum < (__force __u32)saddr)
+		csum++;
+
+	csum += (__force __u32)daddr;
+	if (csum < (__force __u32)daddr)
+		csum++;
+
+	csum += len + proto;
+	if (csum < len + proto)
+		csum++;
+
+	return (__force __wsum)csum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+                  unsigned short len, unsigned short proto,
+                  __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* _S390_CHECKSUM_H */
+
+
diff --git a/arch/s390/include/asm/chpid.h b/arch/s390/include/asm/chpid.h
new file mode 100644
index 000000000000..dfe3c7f3439a
--- /dev/null
+++ b/arch/s390/include/asm/chpid.h
@@ -0,0 +1,56 @@
+/*
+ *  drivers/s390/cio/chpid.h
+ *
+ *    Copyright IBM Corp. 2007
+ *    Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_CHPID_H
+#define _ASM_S390_CHPID_H _ASM_S390_CHPID_H
+
+#include <linux/string.h>
+#include <asm/types.h>
+
+#define __MAX_CHPID 255
+
+struct chp_id {
+	u8 reserved1;
+	u8 cssid;
+	u8 reserved2;
+	u8 id;
+} __attribute__((packed));
+
+#ifdef __KERNEL__
+#include <asm/cio.h>
+
+static inline void chp_id_init(struct chp_id *chpid)
+{
+	memset(chpid, 0, sizeof(struct chp_id));
+}
+
+static inline int chp_id_is_equal(struct chp_id *a, struct chp_id *b)
+{
+	return (a->id == b->id) && (a->cssid == b->cssid);
+}
+
+static inline void chp_id_next(struct chp_id *chpid)
+{
+	if (chpid->id < __MAX_CHPID)
+		chpid->id++;
+	else {
+		chpid->id = 0;
+		chpid->cssid++;
+	}
+}
+
+static inline int chp_id_is_valid(struct chp_id *chpid)
+{
+	return (chpid->cssid <= __MAX_CSSID);
+}
+
+
+#define chp_id_for_each(c) \
+	for (chp_id_init(c); chp_id_is_valid(c); chp_id_next(c))
+#endif /* __KERNEL */
+
+#endif /* _ASM_S390_CHPID_H */
diff --git a/arch/s390/include/asm/chsc.h b/arch/s390/include/asm/chsc.h
new file mode 100644
index 000000000000..d38d0cf62d4b
--- /dev/null
+++ b/arch/s390/include/asm/chsc.h
@@ -0,0 +1,127 @@
+/*
+ * ioctl interface for /dev/chsc
+ *
+ * Copyright 2008 IBM Corp.
+ * Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
+ */
+
+#ifndef _ASM_CHSC_H
+#define _ASM_CHSC_H
+
+#include <asm/chpid.h>
+#include <asm/schid.h>
+
+struct chsc_async_header {
+	__u16 length;
+	__u16 code;
+	__u32 cmd_dependend;
+	__u32 key : 4;
+	__u32 : 28;
+	struct subchannel_id sid;
+} __attribute__ ((packed));
+
+struct chsc_async_area {
+	struct chsc_async_header header;
+	__u8 data[PAGE_SIZE - 16 /* size of chsc_async_header */];
+} __attribute__ ((packed));
+
+
+struct chsc_response_struct {
+	__u16 length;
+	__u16 code;
+	__u32 parms;
+	__u8 data[PAGE_SIZE - 8];
+} __attribute__ ((packed));
+
+struct chsc_chp_cd {
+	struct chp_id chpid;
+	int m;
+	int fmt;
+	struct chsc_response_struct cpcb;
+};
+
+struct chsc_cu_cd {
+	__u16 cun;
+	__u8 cssid;
+	int m;
+	int fmt;
+	struct chsc_response_struct cucb;
+};
+
+struct chsc_sch_cud {
+	struct subchannel_id schid;
+	int fmt;
+	struct chsc_response_struct scub;
+};
+
+struct conf_id {
+	int m;
+	__u8 cssid;
+	__u8 ssid;
+};
+
+struct chsc_conf_info {
+	struct conf_id id;
+	int fmt;
+	struct chsc_response_struct scid;
+};
+
+struct ccl_parm_chpid {
+	int m;
+	struct chp_id chp;
+};
+
+struct ccl_parm_cssids {
+	__u8 f_cssid;
+	__u8 l_cssid;
+};
+
+struct chsc_comp_list {
+	struct {
+		enum {
+			CCL_CU_ON_CHP = 1,
+			CCL_CHP_TYPE_CAP = 2,
+			CCL_CSS_IMG = 4,
+			CCL_CSS_IMG_CONF_CHAR = 5,
+			CCL_IOP_CHP = 6,
+		} ctype;
+		int fmt;
+		struct ccl_parm_chpid chpid;
+		struct ccl_parm_cssids cssids;
+	} req;
+	struct chsc_response_struct sccl;
+};
+
+struct chsc_dcal {
+	struct {
+		enum {
+			DCAL_CSS_IID_PN = 4,
+		} atype;
+		__u32 list_parm[2];
+		int fmt;
+	} req;
+	struct chsc_response_struct sdcal;
+};
+
+struct chsc_cpd_info {
+	struct chp_id chpid;
+	int m;
+	int fmt;
+	int rfmt;
+	int c;
+	struct chsc_response_struct chpdb;
+};
+
+#define CHSC_IOCTL_MAGIC 'c'
+
+#define CHSC_START _IOWR(CHSC_IOCTL_MAGIC, 0x81, struct chsc_async_area)
+#define CHSC_INFO_CHANNEL_PATH _IOWR(CHSC_IOCTL_MAGIC, 0x82, \
+				    struct chsc_chp_cd)
+#define CHSC_INFO_CU _IOWR(CHSC_IOCTL_MAGIC, 0x83, struct chsc_cu_cd)
+#define CHSC_INFO_SCH_CU _IOWR(CHSC_IOCTL_MAGIC, 0x84, struct chsc_sch_cud)
+#define CHSC_INFO_CI _IOWR(CHSC_IOCTL_MAGIC, 0x85, struct chsc_conf_info)
+#define CHSC_INFO_CCL _IOWR(CHSC_IOCTL_MAGIC, 0x86, struct chsc_comp_list)
+#define CHSC_INFO_CPD _IOWR(CHSC_IOCTL_MAGIC, 0x87, struct chsc_cpd_info)
+#define CHSC_INFO_DCAL _IOWR(CHSC_IOCTL_MAGIC, 0x88, struct chsc_dcal)
+
+#endif
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
new file mode 100644
index 000000000000..6dccb071aec3
--- /dev/null
+++ b/arch/s390/include/asm/cio.h
@@ -0,0 +1,514 @@
+/*
+ *  include/asm-s390/cio.h
+ *  include/asm-s390x/cio.h
+ *
+ * Common interface for I/O on S/390
+ */
+#ifndef _ASM_S390_CIO_H_
+#define _ASM_S390_CIO_H_
+
+#include <linux/spinlock.h>
+#include <asm/types.h>
+
+#ifdef __KERNEL__
+
+#define LPM_ANYPATH 0xff
+#define __MAX_CSSID 0
+
+/**
+ * struct cmd_scsw - command-mode subchannel status word
+ * @key: subchannel key
+ * @sctl: suspend control
+ * @eswf: esw format
+ * @cc: deferred condition code
+ * @fmt: format
+ * @pfch: prefetch
+ * @isic: initial-status interruption control
+ * @alcc: address-limit checking control
+ * @ssi: suppress-suspended interruption
+ * @zcc: zero condition code
+ * @ectl: extended control
+ * @pno: path not operational
+ * @res: reserved
+ * @fctl: function control
+ * @actl: activity control
+ * @stctl: status control
+ * @cpa: channel program address
+ * @dstat: device status
+ * @cstat: subchannel status
+ * @count: residual count
+ */
+struct cmd_scsw {
+	__u32 key  : 4;
+	__u32 sctl : 1;
+	__u32 eswf : 1;
+	__u32 cc   : 2;
+	__u32 fmt  : 1;
+	__u32 pfch : 1;
+	__u32 isic : 1;
+	__u32 alcc : 1;
+	__u32 ssi  : 1;
+	__u32 zcc  : 1;
+	__u32 ectl : 1;
+	__u32 pno  : 1;
+	__u32 res  : 1;
+	__u32 fctl : 3;
+	__u32 actl : 7;
+	__u32 stctl : 5;
+	__u32 cpa;
+	__u32 dstat : 8;
+	__u32 cstat : 8;
+	__u32 count : 16;
+} __attribute__ ((packed));
+
+/**
+ * struct tm_scsw - transport-mode subchannel status word
+ * @key: subchannel key
+ * @eswf: esw format
+ * @cc: deferred condition code
+ * @fmt: format
+ * @x: IRB-format control
+ * @q: interrogate-complete
+ * @ectl: extended control
+ * @pno: path not operational
+ * @fctl: function control
+ * @actl: activity control
+ * @stctl: status control
+ * @tcw: TCW address
+ * @dstat: device status
+ * @cstat: subchannel status
+ * @fcxs: FCX status
+ * @schxs: subchannel-extended status
+ */
+struct tm_scsw {
+	u32 key:4;
+	u32 :1;
+	u32 eswf:1;
+	u32 cc:2;
+	u32 fmt:3;
+	u32 x:1;
+	u32 q:1;
+	u32 :1;
+	u32 ectl:1;
+	u32 pno:1;
+	u32 :1;
+	u32 fctl:3;
+	u32 actl:7;
+	u32 stctl:5;
+	u32 tcw;
+	u32 dstat:8;
+	u32 cstat:8;
+	u32 fcxs:8;
+	u32 schxs:8;
+} __attribute__ ((packed));
+
+/**
+ * union scsw - subchannel status word
+ * @cmd: command-mode SCSW
+ * @tm: transport-mode SCSW
+ */
+union scsw {
+	struct cmd_scsw cmd;
+	struct tm_scsw tm;
+} __attribute__ ((packed));
+
+int scsw_is_tm(union scsw *scsw);
+u32 scsw_key(union scsw *scsw);
+u32 scsw_eswf(union scsw *scsw);
+u32 scsw_cc(union scsw *scsw);
+u32 scsw_ectl(union scsw *scsw);
+u32 scsw_pno(union scsw *scsw);
+u32 scsw_fctl(union scsw *scsw);
+u32 scsw_actl(union scsw *scsw);
+u32 scsw_stctl(union scsw *scsw);
+u32 scsw_dstat(union scsw *scsw);
+u32 scsw_cstat(union scsw *scsw);
+int scsw_is_solicited(union scsw *scsw);
+int scsw_is_valid_key(union scsw *scsw);
+int scsw_is_valid_eswf(union scsw *scsw);
+int scsw_is_valid_cc(union scsw *scsw);
+int scsw_is_valid_ectl(union scsw *scsw);
+int scsw_is_valid_pno(union scsw *scsw);
+int scsw_is_valid_fctl(union scsw *scsw);
+int scsw_is_valid_actl(union scsw *scsw);
+int scsw_is_valid_stctl(union scsw *scsw);
+int scsw_is_valid_dstat(union scsw *scsw);
+int scsw_is_valid_cstat(union scsw *scsw);
+int scsw_cmd_is_valid_key(union scsw *scsw);
+int scsw_cmd_is_valid_sctl(union scsw *scsw);
+int scsw_cmd_is_valid_eswf(union scsw *scsw);
+int scsw_cmd_is_valid_cc(union scsw *scsw);
+int scsw_cmd_is_valid_fmt(union scsw *scsw);
+int scsw_cmd_is_valid_pfch(union scsw *scsw);
+int scsw_cmd_is_valid_isic(union scsw *scsw);
+int scsw_cmd_is_valid_alcc(union scsw *scsw);
+int scsw_cmd_is_valid_ssi(union scsw *scsw);
+int scsw_cmd_is_valid_zcc(union scsw *scsw);
+int scsw_cmd_is_valid_ectl(union scsw *scsw);
+int scsw_cmd_is_valid_pno(union scsw *scsw);
+int scsw_cmd_is_valid_fctl(union scsw *scsw);
+int scsw_cmd_is_valid_actl(union scsw *scsw);
+int scsw_cmd_is_valid_stctl(union scsw *scsw);
+int scsw_cmd_is_valid_dstat(union scsw *scsw);
+int scsw_cmd_is_valid_cstat(union scsw *scsw);
+int scsw_cmd_is_solicited(union scsw *scsw);
+int scsw_tm_is_valid_key(union scsw *scsw);
+int scsw_tm_is_valid_eswf(union scsw *scsw);
+int scsw_tm_is_valid_cc(union scsw *scsw);
+int scsw_tm_is_valid_fmt(union scsw *scsw);
+int scsw_tm_is_valid_x(union scsw *scsw);
+int scsw_tm_is_valid_q(union scsw *scsw);
+int scsw_tm_is_valid_ectl(union scsw *scsw);
+int scsw_tm_is_valid_pno(union scsw *scsw);
+int scsw_tm_is_valid_fctl(union scsw *scsw);
+int scsw_tm_is_valid_actl(union scsw *scsw);
+int scsw_tm_is_valid_stctl(union scsw *scsw);
+int scsw_tm_is_valid_dstat(union scsw *scsw);
+int scsw_tm_is_valid_cstat(union scsw *scsw);
+int scsw_tm_is_valid_fcxs(union scsw *scsw);
+int scsw_tm_is_valid_schxs(union scsw *scsw);
+int scsw_tm_is_solicited(union scsw *scsw);
+
+#define SCSW_FCTL_CLEAR_FUNC	 0x1
+#define SCSW_FCTL_HALT_FUNC	 0x2
+#define SCSW_FCTL_START_FUNC	 0x4
+
+#define SCSW_ACTL_SUSPENDED	 0x1
+#define SCSW_ACTL_DEVACT	 0x2
+#define SCSW_ACTL_SCHACT	 0x4
+#define SCSW_ACTL_CLEAR_PEND	 0x8
+#define SCSW_ACTL_HALT_PEND	 0x10
+#define SCSW_ACTL_START_PEND	 0x20
+#define SCSW_ACTL_RESUME_PEND	 0x40
+
+#define SCSW_STCTL_STATUS_PEND	 0x1
+#define SCSW_STCTL_SEC_STATUS	 0x2
+#define SCSW_STCTL_PRIM_STATUS	 0x4
+#define SCSW_STCTL_INTER_STATUS	 0x8
+#define SCSW_STCTL_ALERT_STATUS	 0x10
+
+#define DEV_STAT_ATTENTION	 0x80
+#define DEV_STAT_STAT_MOD	 0x40
+#define DEV_STAT_CU_END		 0x20
+#define DEV_STAT_BUSY		 0x10
+#define DEV_STAT_CHN_END	 0x08
+#define DEV_STAT_DEV_END	 0x04
+#define DEV_STAT_UNIT_CHECK	 0x02
+#define DEV_STAT_UNIT_EXCEP	 0x01
+
+#define SCHN_STAT_PCI		 0x80
+#define SCHN_STAT_INCORR_LEN	 0x40
+#define SCHN_STAT_PROG_CHECK	 0x20
+#define SCHN_STAT_PROT_CHECK	 0x10
+#define SCHN_STAT_CHN_DATA_CHK	 0x08
+#define SCHN_STAT_CHN_CTRL_CHK	 0x04
+#define SCHN_STAT_INTF_CTRL_CHK	 0x02
+#define SCHN_STAT_CHAIN_CHECK	 0x01
+
+/*
+ * architectured values for first sense byte
+ */
+#define SNS0_CMD_REJECT		0x80
+#define SNS_CMD_REJECT		SNS0_CMD_REJEC
+#define SNS0_INTERVENTION_REQ	0x40
+#define SNS0_BUS_OUT_CHECK	0x20
+#define SNS0_EQUIPMENT_CHECK	0x10
+#define SNS0_DATA_CHECK		0x08
+#define SNS0_OVERRUN		0x04
+#define SNS0_INCOMPL_DOMAIN	0x01
+
+/*
+ * architectured values for second sense byte
+ */
+#define SNS1_PERM_ERR		0x80
+#define SNS1_INV_TRACK_FORMAT	0x40
+#define SNS1_EOC		0x20
+#define SNS1_MESSAGE_TO_OPER	0x10
+#define SNS1_NO_REC_FOUND	0x08
+#define SNS1_FILE_PROTECTED	0x04
+#define SNS1_WRITE_INHIBITED	0x02
+#define SNS1_INPRECISE_END	0x01
+
+/*
+ * architectured values for third sense byte
+ */
+#define SNS2_REQ_INH_WRITE	0x80
+#define SNS2_CORRECTABLE	0x40
+#define SNS2_FIRST_LOG_ERR	0x20
+#define SNS2_ENV_DATA_PRESENT	0x10
+#define SNS2_INPRECISE_END	0x04
+
+/**
+ * struct ccw1 - channel command word
+ * @cmd_code: command code
+ * @flags: flags, like IDA adressing, etc.
+ * @count: byte count
+ * @cda: data address
+ *
+ * The ccw is the basic structure to build channel programs that perform
+ * operations with the device or the control unit. Only Format-1 channel
+ * command words are supported.
+ */
+struct ccw1 {
+	__u8  cmd_code;
+	__u8  flags;
+	__u16 count;
+	__u32 cda;
+} __attribute__ ((packed,aligned(8)));
+
+#define CCW_FLAG_DC		0x80
+#define CCW_FLAG_CC		0x40
+#define CCW_FLAG_SLI		0x20
+#define CCW_FLAG_SKIP		0x10
+#define CCW_FLAG_PCI		0x08
+#define CCW_FLAG_IDA		0x04
+#define CCW_FLAG_SUSPEND	0x02
+
+#define CCW_CMD_READ_IPL	0x02
+#define CCW_CMD_NOOP		0x03
+#define CCW_CMD_BASIC_SENSE	0x04
+#define CCW_CMD_TIC		0x08
+#define CCW_CMD_STLCK           0x14
+#define CCW_CMD_SENSE_PGID	0x34
+#define CCW_CMD_SUSPEND_RECONN	0x5B
+#define CCW_CMD_RDC		0x64
+#define CCW_CMD_RELEASE		0x94
+#define CCW_CMD_SET_PGID	0xAF
+#define CCW_CMD_SENSE_ID	0xE4
+#define CCW_CMD_DCTL		0xF3
+
+#define SENSE_MAX_COUNT		0x20
+
+/**
+ * struct erw - extended report word
+ * @res0: reserved
+ * @auth: authorization check
+ * @pvrf: path-verification-required flag
+ * @cpt: channel-path timeout
+ * @fsavf: failing storage address validity flag
+ * @cons: concurrent sense
+ * @scavf: secondary ccw address validity flag
+ * @fsaf: failing storage address format
+ * @scnt: sense count, if @cons == %1
+ * @res16: reserved
+ */
+struct erw {
+	__u32 res0  : 3;
+	__u32 auth  : 1;
+	__u32 pvrf  : 1;
+	__u32 cpt   : 1;
+	__u32 fsavf : 1;
+	__u32 cons  : 1;
+	__u32 scavf : 1;
+	__u32 fsaf  : 1;
+	__u32 scnt  : 6;
+	__u32 res16 : 16;
+} __attribute__ ((packed));
+
+/**
+ * struct sublog - subchannel logout area
+ * @res0: reserved
+ * @esf: extended status flags
+ * @lpum: last path used mask
+ * @arep: ancillary report
+ * @fvf: field-validity flags
+ * @sacc: storage access code
+ * @termc: termination code
+ * @devsc: device-status check
+ * @serr: secondary error
+ * @ioerr: i/o-error alert
+ * @seqc: sequence code
+ */
+struct sublog {
+	__u32 res0  : 1;
+	__u32 esf   : 7;
+	__u32 lpum  : 8;
+	__u32 arep  : 1;
+	__u32 fvf   : 5;
+	__u32 sacc  : 2;
+	__u32 termc : 2;
+	__u32 devsc : 1;
+	__u32 serr  : 1;
+	__u32 ioerr : 1;
+	__u32 seqc  : 3;
+} __attribute__ ((packed));
+
+/**
+ * struct esw0 - Format 0 Extended Status Word (ESW)
+ * @sublog: subchannel logout
+ * @erw: extended report word
+ * @faddr: failing storage address
+ * @saddr: secondary ccw address
+ */
+struct esw0 {
+	struct sublog sublog;
+	struct erw erw;
+	__u32  faddr[2];
+	__u32  saddr;
+} __attribute__ ((packed));
+
+/**
+ * struct esw1 - Format 1 Extended Status Word (ESW)
+ * @zero0: reserved zeros
+ * @lpum: last path used mask
+ * @zero16: reserved zeros
+ * @erw: extended report word
+ * @zeros: three fullwords of zeros
+ */
+struct esw1 {
+	__u8  zero0;
+	__u8  lpum;
+	__u16 zero16;
+	struct erw erw;
+	__u32 zeros[3];
+} __attribute__ ((packed));
+
+/**
+ * struct esw2 - Format 2 Extended Status Word (ESW)
+ * @zero0: reserved zeros
+ * @lpum: last path used mask
+ * @dcti: device-connect-time interval
+ * @erw: extended report word
+ * @zeros: three fullwords of zeros
+ */
+struct esw2 {
+	__u8  zero0;
+	__u8  lpum;
+	__u16 dcti;
+	struct erw erw;
+	__u32 zeros[3];
+} __attribute__ ((packed));
+
+/**
+ * struct esw3 - Format 3 Extended Status Word (ESW)
+ * @zero0: reserved zeros
+ * @lpum: last path used mask
+ * @res: reserved
+ * @erw: extended report word
+ * @zeros: three fullwords of zeros
+ */
+struct esw3 {
+	__u8  zero0;
+	__u8  lpum;
+	__u16 res;
+	struct erw erw;
+	__u32 zeros[3];
+} __attribute__ ((packed));
+
+/**
+ * struct irb - interruption response block
+ * @scsw: subchannel status word
+ * @esw: extened status word, 4 formats
+ * @ecw: extended control word
+ *
+ * The irb that is handed to the device driver when an interrupt occurs. For
+ * solicited interrupts, the common I/O layer already performs checks whether
+ * a field is valid; a field not being valid is always passed as %0.
+ * If a unit check occured, @ecw may contain sense data; this is retrieved
+ * by the common I/O layer itself if the device doesn't support concurrent
+ * sense (so that the device driver never needs to perform basic sene itself).
+ * For unsolicited interrupts, the irb is passed as-is (expect for sense data,
+ * if applicable).
+ */
+struct irb {
+	union scsw scsw;
+	union {
+		struct esw0 esw0;
+		struct esw1 esw1;
+		struct esw2 esw2;
+		struct esw3 esw3;
+	} esw;
+	__u8   ecw[32];
+} __attribute__ ((packed,aligned(4)));
+
+/**
+ * struct ciw - command information word  (CIW) layout
+ * @et: entry type
+ * @reserved: reserved bits
+ * @ct: command type
+ * @cmd: command code
+ * @count: command count
+ */
+struct ciw {
+	__u32 et       :  2;
+	__u32 reserved :  2;
+	__u32 ct       :  4;
+	__u32 cmd      :  8;
+	__u32 count    : 16;
+} __attribute__ ((packed));
+
+#define CIW_TYPE_RCD	0x0    	/* read configuration data */
+#define CIW_TYPE_SII	0x1    	/* set interface identifier */
+#define CIW_TYPE_RNI	0x2    	/* read node identifier */
+
+/*
+ * Flags used as input parameters for do_IO()
+ */
+#define DOIO_ALLOW_SUSPEND	 0x0001 /* allow for channel prog. suspend */
+#define DOIO_DENY_PREFETCH	 0x0002 /* don't allow for CCW prefetch */
+#define DOIO_SUPPRESS_INTER	 0x0004 /* suppress intermediate inter. */
+					/* ... for suspended CCWs */
+/* Device or subchannel gone. */
+#define CIO_GONE       0x0001
+/* No path to device. */
+#define CIO_NO_PATH    0x0002
+/* Device has appeared. */
+#define CIO_OPER       0x0004
+/* Sick revalidation of device. */
+#define CIO_REVALIDATE 0x0008
+
+/**
+ * struct ccw_dev_id - unique identifier for ccw devices
+ * @ssid: subchannel set id
+ * @devno: device number
+ *
+ * This structure is not directly based on any hardware structure. The
+ * hardware identifies a device by its device number and its subchannel,
+ * which is in turn identified by its id. In order to get a unique identifier
+ * for ccw devices across subchannel sets, @struct ccw_dev_id has been
+ * introduced.
+ */
+struct ccw_dev_id {
+	u8 ssid;
+	u16 devno;
+};
+
+/**
+ * ccw_device_id_is_equal() - compare two ccw_dev_ids
+ * @dev_id1: a ccw_dev_id
+ * @dev_id2: another ccw_dev_id
+ * Returns:
+ *  %1 if the two structures are equal field-by-field,
+ *  %0 if not.
+ * Context:
+ *  any
+ */
+static inline int ccw_dev_id_is_equal(struct ccw_dev_id *dev_id1,
+				      struct ccw_dev_id *dev_id2)
+{
+	if ((dev_id1->ssid == dev_id2->ssid) &&
+	    (dev_id1->devno == dev_id2->devno))
+		return 1;
+	return 0;
+}
+
+extern void wait_cons_dev(void);
+
+extern void css_schedule_reprobe(void);
+
+extern void reipl_ccw_dev(struct ccw_dev_id *id);
+
+struct cio_iplinfo {
+	u16 devno;
+	int is_qdio;
+};
+
+extern int cio_get_iplinfo(struct cio_iplinfo *iplinfo);
+
+/* Function from drivers/s390/cio/chsc.c */
+int chsc_sstpc(void *page, unsigned int op, u16 ctrl);
+int chsc_sstpi(void *page, void *result, size_t size);
+
+#endif
+
+#endif
diff --git a/arch/s390/include/asm/cmb.h b/arch/s390/include/asm/cmb.h
new file mode 100644
index 000000000000..50196857d27a
--- /dev/null
+++ b/arch/s390/include/asm/cmb.h
@@ -0,0 +1,58 @@
+#ifndef S390_CMB_H
+#define S390_CMB_H
+/**
+ * struct cmbdata - channel measurement block data for user space
+ * @size: size of the stored data
+ * @elapsed_time: time since last sampling
+ * @ssch_rsch_count: number of ssch and rsch
+ * @sample_count: number of samples
+ * @device_connect_time: time of device connect
+ * @function_pending_time: time of function pending
+ * @device_disconnect_time: time of device disconnect
+ * @control_unit_queuing_time: time of control unit queuing
+ * @device_active_only_time: time of device active only
+ * @device_busy_time: time of device busy (ext. format)
+ * @initial_command_response_time: initial command response time (ext. format)
+ *
+ * All values are stored as 64 bit for simplicity, especially
+ * in 32 bit emulation mode. All time values are normalized to
+ * nanoseconds.
+ * Currently, two formats are known, which differ by the size of
+ * this structure, i.e. the last two members are only set when
+ * the extended channel measurement facility (first shipped in
+ * z990 machines) is activated.
+ * Potentially, more fields could be added, which would result in a
+ * new ioctl number.
+ */
+struct cmbdata {
+	__u64 size;
+	__u64 elapsed_time;
+ /* basic and exended format: */
+	__u64 ssch_rsch_count;
+	__u64 sample_count;
+	__u64 device_connect_time;
+	__u64 function_pending_time;
+	__u64 device_disconnect_time;
+	__u64 control_unit_queuing_time;
+	__u64 device_active_only_time;
+ /* extended format only: */
+	__u64 device_busy_time;
+	__u64 initial_command_response_time;
+};
+
+/* enable channel measurement */
+#define BIODASDCMFENABLE	_IO(DASD_IOCTL_LETTER, 32)
+/* enable channel measurement */
+#define BIODASDCMFDISABLE	_IO(DASD_IOCTL_LETTER, 33)
+/* read channel measurement data */
+#define BIODASDREADALLCMB	_IOWR(DASD_IOCTL_LETTER, 33, struct cmbdata)
+
+#ifdef __KERNEL__
+struct ccw_device;
+extern int enable_cmf(struct ccw_device *cdev);
+extern int disable_cmf(struct ccw_device *cdev);
+extern u64 cmf_read(struct ccw_device *cdev, int index);
+extern int cmf_readall(struct ccw_device *cdev, struct cmbdata *data);
+
+#endif /* __KERNEL__ */
+#endif /* S390_CMB_H */
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
new file mode 100644
index 000000000000..de065b32381a
--- /dev/null
+++ b/arch/s390/include/asm/compat.h
@@ -0,0 +1,233 @@
+#ifndef _ASM_S390X_COMPAT_H
+#define _ASM_S390X_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <linux/sched.h>
+
+#define PSW32_MASK_PER		0x40000000UL
+#define PSW32_MASK_DAT		0x04000000UL
+#define PSW32_MASK_IO		0x02000000UL
+#define PSW32_MASK_EXT		0x01000000UL
+#define PSW32_MASK_KEY		0x00F00000UL
+#define PSW32_MASK_MCHECK	0x00040000UL
+#define PSW32_MASK_WAIT		0x00020000UL
+#define PSW32_MASK_PSTATE	0x00010000UL
+#define PSW32_MASK_ASC		0x0000C000UL
+#define PSW32_MASK_CC		0x00003000UL
+#define PSW32_MASK_PM		0x00000f00UL
+
+#define PSW32_ADDR_AMODE31	0x80000000UL
+#define PSW32_ADDR_INSN		0x7FFFFFFFUL
+
+#define PSW32_BASE_BITS		0x00080000UL
+
+#define PSW32_ASC_PRIMARY	0x00000000UL
+#define PSW32_ASC_ACCREG	0x00004000UL
+#define PSW32_ASC_SECONDARY	0x00008000UL
+#define PSW32_ASC_HOME		0x0000C000UL
+
+#define PSW32_MASK_MERGE(CURRENT,NEW) \
+	(((CURRENT) & ~(PSW32_MASK_CC|PSW32_MASK_PM)) | \
+	 ((NEW) & (PSW32_MASK_CC|PSW32_MASK_PM)))
+
+extern long psw32_user_bits;
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_pid_t;
+typedef u16		__compat_uid_t;
+typedef u16		__compat_gid_t;
+typedef u32		__compat_uid32_t;
+typedef u32		__compat_gid32_t;
+typedef u16		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u16		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef u16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_key_t;
+typedef s32		compat_timer_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef s64		compat_s64;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+typedef u64		compat_u64;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	u16		__pad1;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	__compat_uid_t	st_uid;
+	__compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	u16		__pad2;
+	u32		st_size;
+	u32		st_blksize;
+	u32		st_blocks;
+	u32		st_atime;
+	u32		st_atime_nsec;
+	u32		st_mtime;
+	u32		st_mtime_nsec;
+	u32		st_ctime;
+	u32		st_ctime_nsec;
+	u32		__unused4;
+	u32		__unused5;
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+#define F_GETLK64       12
+#define F_SETLK64       13
+#define F_SETLKW64      14    
+
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+};
+
+struct compat_statfs {
+	s32		f_type;
+	s32		f_bsize;
+	s32		f_blocks;
+	s32		f_bfree;
+	s32		f_bavail;
+	s32		f_files;
+	s32		f_ffree;
+	compat_fsid_t	f_fsid;
+	s32		f_namelen;
+	s32		f_frsize;
+	s32		f_spare[6];
+};
+
+#define COMPAT_RLIM_OLD_INFINITY	0x7fffffff
+#define COMPAT_RLIM_INFINITY		0xffffffff
+
+typedef u32		compat_old_sigset_t;	/* at least 32 bits */
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)(uptr & 0x7fffffffUL);
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+	unsigned long stack;
+
+	stack = KSTK_ESP(current);
+	if (test_thread_flag(TIF_31BIT))
+		stack &= 0x7fffffffUL;
+	return (void __user *) (stack - len);
+}
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__compat_uid32_t uid;
+	__compat_gid32_t gid;
+	__compat_uid32_t cuid;
+	__compat_gid32_t cgid;
+	compat_mode_t mode;
+	unsigned short __pad1;
+	unsigned short seq;
+	unsigned short __pad2;
+	unsigned int __unused1;
+	unsigned int __unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	compat_time_t  sem_otime;
+	compat_ulong_t __pad1;
+	compat_time_t  sem_ctime;
+	compat_ulong_t __pad2;
+	compat_ulong_t sem_nsems;
+	compat_ulong_t __unused1;
+	compat_ulong_t __unused2;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	compat_time_t   msg_stime;
+	compat_ulong_t __pad1;
+	compat_time_t   msg_rtime;
+	compat_ulong_t __pad2;
+	compat_time_t   msg_ctime;
+	compat_ulong_t __pad3;
+	compat_ulong_t msg_cbytes;
+	compat_ulong_t msg_qnum;
+	compat_ulong_t msg_qbytes;
+	compat_pid_t   msg_lspid;
+	compat_pid_t   msg_lrpid;
+	compat_ulong_t __unused1;
+	compat_ulong_t __unused2;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	compat_size_t  shm_segsz;
+	compat_time_t  shm_atime;
+	compat_ulong_t __pad1;
+	compat_time_t  shm_dtime;
+	compat_ulong_t __pad2;
+	compat_time_t  shm_ctime;
+	compat_ulong_t __pad3;
+	compat_pid_t   shm_cpid;
+	compat_pid_t   shm_lpid;
+	compat_ulong_t shm_nattch;
+	compat_ulong_t __unused1;
+	compat_ulong_t __unused2;
+};
+#endif /* _ASM_S390X_COMPAT_H */
diff --git a/arch/s390/include/asm/cpcmd.h b/arch/s390/include/asm/cpcmd.h
new file mode 100644
index 000000000000..48a9eab16429
--- /dev/null
+++ b/arch/s390/include/asm/cpcmd.h
@@ -0,0 +1,34 @@
+/*
+ *  arch/s390/kernel/cpcmd.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *               Christian Borntraeger (cborntra@de.ibm.com),
+ */
+
+#ifndef _ASM_S390_CPCMD_H
+#define _ASM_S390_CPCMD_H
+
+/*
+ * the lowlevel function for cpcmd
+ * the caller of __cpcmd has to ensure that the response buffer is below 2 GB
+ */
+extern int __cpcmd(const char *cmd, char *response, int rlen, int *response_code);
+
+/*
+ * cpcmd is the in-kernel interface for issuing CP commands
+ *
+ * cmd:		null-terminated command string, max 240 characters
+ * response:	response buffer for VM's textual response
+ * rlen:	size of the response buffer, cpcmd will not exceed this size
+ *		but will cap the output, if its too large. Everything that
+ *		did not fit into the buffer will be silently dropped
+ * response_code: return pointer for VM's error code
+ * return value: the size of the response. The caller can check if the buffer
+ *		was large enough by comparing the return value and rlen
+ * NOTE: If the response buffer is not below 2 GB, cpcmd can sleep
+ */
+extern int cpcmd(const char *cmd, char *response, int rlen, int *response_code);
+
+#endif /* _ASM_S390_CPCMD_H */
diff --git a/arch/s390/include/asm/cpu.h b/arch/s390/include/asm/cpu.h
new file mode 100644
index 000000000000..e5a6a9ba3adf
--- /dev/null
+++ b/arch/s390/include/asm/cpu.h
@@ -0,0 +1,33 @@
+/*
+ *  include/asm-s390/cpu.h
+ *
+ *    Copyright IBM Corp. 2007
+ *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_CPU_H_
+#define _ASM_S390_CPU_H_
+
+#include <linux/types.h>
+#include <linux/percpu.h>
+#include <linux/spinlock.h>
+
+struct s390_idle_data {
+	spinlock_t lock;
+	unsigned int in_idle;
+	unsigned long long idle_count;
+	unsigned long long idle_enter;
+	unsigned long long idle_time;
+};
+
+DECLARE_PER_CPU(struct s390_idle_data, s390_idle);
+
+void s390_idle_leave(void);
+
+static inline void s390_idle_check(void)
+{
+	if ((&__get_cpu_var(s390_idle))->in_idle)
+		s390_idle_leave();
+}
+
+#endif /* _ASM_S390_CPU_H_ */
diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h
new file mode 100644
index 000000000000..133ce054fc89
--- /dev/null
+++ b/arch/s390/include/asm/cputime.h
@@ -0,0 +1,177 @@
+/*
+ *  include/asm-s390/cputime.h
+ *
+ *  (C) Copyright IBM Corp. 2004
+ *
+ *  Author: Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#ifndef _S390_CPUTIME_H
+#define _S390_CPUTIME_H
+
+#include <asm/div64.h>
+
+/* We want to use micro-second resolution. */
+
+typedef unsigned long long cputime_t;
+typedef unsigned long long cputime64_t;
+
+#ifndef __s390x__
+
+static inline unsigned int
+__div(unsigned long long n, unsigned int base)
+{
+	register_pair rp;
+
+	rp.pair = n >> 1;
+	asm ("dr %0,%1" : "+d" (rp) : "d" (base >> 1));
+	return rp.subreg.odd;
+}
+
+#else /* __s390x__ */
+
+static inline unsigned int
+__div(unsigned long long n, unsigned int base)
+{
+	return n / base;
+}
+
+#endif /* __s390x__ */
+
+#define cputime_zero			(0ULL)
+#define cputime_max			((~0UL >> 1) - 1)
+#define cputime_add(__a, __b)		((__a) +  (__b))
+#define cputime_sub(__a, __b)		((__a) -  (__b))
+#define cputime_div(__a, __n) ({		\
+	unsigned long long __div = (__a);	\
+	do_div(__div,__n);			\
+	__div;					\
+})
+#define cputime_halve(__a)		((__a) >> 1)
+#define cputime_eq(__a, __b)		((__a) == (__b))
+#define cputime_gt(__a, __b)		((__a) >  (__b))
+#define cputime_ge(__a, __b)		((__a) >= (__b))
+#define cputime_lt(__a, __b)		((__a) <  (__b))
+#define cputime_le(__a, __b)		((__a) <= (__b))
+#define cputime_to_jiffies(__ct)	(__div((__ct), 1000000 / HZ))
+#define cputime_to_scaled(__ct)		(__ct)
+#define jiffies_to_cputime(__hz)	((cputime_t)(__hz) * (1000000 / HZ))
+
+#define cputime64_zero			(0ULL)
+#define cputime64_add(__a, __b)		((__a) + (__b))
+#define cputime_to_cputime64(__ct)	(__ct)
+
+static inline u64
+cputime64_to_jiffies64(cputime64_t cputime)
+{
+	do_div(cputime, 1000000 / HZ);
+	return cputime;
+}
+
+/*
+ * Convert cputime to milliseconds and back.
+ */
+static inline unsigned int
+cputime_to_msecs(const cputime_t cputime)
+{
+	return __div(cputime, 1000);
+}
+
+static inline cputime_t
+msecs_to_cputime(const unsigned int m)
+{
+	return (cputime_t) m * 1000;
+}
+
+/*
+ * Convert cputime to milliseconds and back.
+ */
+static inline unsigned int
+cputime_to_secs(const cputime_t cputime)
+{
+	return __div(cputime, 1000000);
+}
+
+static inline cputime_t
+secs_to_cputime(const unsigned int s)
+{
+	return (cputime_t) s * 1000000;
+}
+
+/*
+ * Convert cputime to timespec and back.
+ */
+static inline cputime_t
+timespec_to_cputime(const struct timespec *value)
+{
+        return value->tv_nsec / 1000 + (u64) value->tv_sec * 1000000;
+}
+
+static inline void
+cputime_to_timespec(const cputime_t cputime, struct timespec *value)
+{
+#ifndef __s390x__
+	register_pair rp;
+
+	rp.pair = cputime >> 1;
+	asm ("dr %0,%1" : "+d" (rp) : "d" (1000000 >> 1));
+	value->tv_nsec = rp.subreg.even * 1000;
+	value->tv_sec = rp.subreg.odd;
+#else
+	value->tv_nsec = (cputime % 1000000) * 1000;
+	value->tv_sec = cputime / 1000000;
+#endif
+}
+
+/*
+ * Convert cputime to timeval and back.
+ * Since cputime and timeval have the same resolution (microseconds)
+ * this is easy.
+ */
+static inline cputime_t
+timeval_to_cputime(const struct timeval *value)
+{
+        return value->tv_usec + (u64) value->tv_sec * 1000000;
+}
+
+static inline void
+cputime_to_timeval(const cputime_t cputime, struct timeval *value)
+{
+#ifndef __s390x__
+	register_pair rp;
+
+	rp.pair = cputime >> 1;
+	asm ("dr %0,%1" : "+d" (rp) : "d" (1000000 >> 1));
+	value->tv_usec = rp.subreg.even;
+	value->tv_sec = rp.subreg.odd;
+#else
+	value->tv_usec = cputime % 1000000;
+	value->tv_sec = cputime / 1000000;
+#endif
+}
+
+/*
+ * Convert cputime to clock and back.
+ */
+static inline clock_t
+cputime_to_clock_t(cputime_t cputime)
+{
+	return __div(cputime, 1000000 / USER_HZ);
+}
+
+static inline cputime_t
+clock_t_to_cputime(unsigned long x)
+{
+	return (cputime_t) x * (1000000 / USER_HZ);
+}
+
+/*
+ * Convert cputime64 to clock.
+ */
+static inline clock_t
+cputime64_to_clock_t(cputime64_t cputime)
+{
+       return __div(cputime, 1000000 / USER_HZ);
+}
+
+#endif /* _S390_CPUTIME_H */
diff --git a/arch/s390/include/asm/current.h b/arch/s390/include/asm/current.h
new file mode 100644
index 000000000000..83cf36cde2da
--- /dev/null
+++ b/arch/s390/include/asm/current.h
@@ -0,0 +1,23 @@
+/*
+ *  include/asm-s390/current.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/current.h"
+ */
+
+#ifndef _S390_CURRENT_H
+#define _S390_CURRENT_H
+
+#ifdef __KERNEL__
+#include <asm/lowcore.h>
+
+struct task_struct;
+
+#define current ((struct task_struct *const)S390_lowcore.current_task)
+
+#endif
+
+#endif /* !(_S390_CURRENT_H) */
diff --git a/arch/s390/include/asm/dasd.h b/arch/s390/include/asm/dasd.h
new file mode 100644
index 000000000000..3f002e13d024
--- /dev/null
+++ b/arch/s390/include/asm/dasd.h
@@ -0,0 +1,270 @@
+/* 
+ * File...........: linux/drivers/s390/block/dasd.c
+ * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
+ * Bugreports.to..: <Linux390@de.ibm.com>
+ * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
+ *
+ * This file is the interface of the DASD device driver, which is exported to user space
+ * any future changes wrt the API will result in a change of the APIVERSION reported
+ * to userspace by the DASDAPIVER-ioctl
+ *
+ */
+
+#ifndef DASD_H
+#define DASD_H
+#include <linux/ioctl.h>
+
+#define DASD_IOCTL_LETTER 'D'
+
+#define DASD_API_VERSION 6
+
+/* 
+ * struct dasd_information2_t
+ * represents any data about the device, which is visible to userspace.
+ *  including foramt and featueres.
+ */
+typedef struct dasd_information2_t {
+        unsigned int devno;         /* S/390 devno */
+        unsigned int real_devno;    /* for aliases */
+        unsigned int schid;         /* S/390 subchannel identifier */
+        unsigned int cu_type  : 16; /* from SenseID */
+        unsigned int cu_model :  8; /* from SenseID */
+        unsigned int dev_type : 16; /* from SenseID */
+        unsigned int dev_model : 8; /* from SenseID */
+        unsigned int open_count; 
+        unsigned int req_queue_len; 
+        unsigned int chanq_len;     /* length of chanq */
+        char type[4];               /* from discipline.name, 'none' for unknown */
+        unsigned int status;        /* current device level */
+        unsigned int label_block;   /* where to find the VOLSER */
+        unsigned int FBA_layout;    /* fixed block size (like AIXVOL) */
+        unsigned int characteristics_size;
+        unsigned int confdata_size;
+        char characteristics[64];   /* from read_device_characteristics */
+        char configuration_data[256]; /* from read_configuration_data */
+        unsigned int format;          /* format info like formatted/cdl/ldl/... */
+        unsigned int features;        /* dasd features like 'ro',...            */
+        unsigned int reserved0;       /* reserved for further use ,...          */
+        unsigned int reserved1;       /* reserved for further use ,...          */
+        unsigned int reserved2;       /* reserved for further use ,...          */
+        unsigned int reserved3;       /* reserved for further use ,...          */
+        unsigned int reserved4;       /* reserved for further use ,...          */
+        unsigned int reserved5;       /* reserved for further use ,...          */
+        unsigned int reserved6;       /* reserved for further use ,...          */
+        unsigned int reserved7;       /* reserved for further use ,...          */
+} dasd_information2_t;
+
+/*
+ * values to be used for dasd_information_t.format
+ * 0x00: NOT formatted
+ * 0x01: Linux disc layout
+ * 0x02: Common disc layout
+ */
+#define DASD_FORMAT_NONE 0
+#define DASD_FORMAT_LDL  1
+#define DASD_FORMAT_CDL  2
+/*
+ * values to be used for dasd_information_t.features
+ * 0x00: default features
+ * 0x01: readonly (ro)
+ * 0x02: use diag discipline (diag)
+ * 0x04: set the device initially online (internal use only)
+ * 0x08: enable ERP related logging
+ */
+#define DASD_FEATURE_DEFAULT	     0x00
+#define DASD_FEATURE_READONLY	     0x01
+#define DASD_FEATURE_USEDIAG	     0x02
+#define DASD_FEATURE_INITIAL_ONLINE  0x04
+#define DASD_FEATURE_ERPLOG	     0x08
+
+#define DASD_PARTN_BITS 2
+
+/* 
+ * struct dasd_information_t
+ * represents any data about the data, which is visible to userspace
+ */
+typedef struct dasd_information_t {
+        unsigned int devno;         /* S/390 devno */
+        unsigned int real_devno;    /* for aliases */
+        unsigned int schid;         /* S/390 subchannel identifier */
+        unsigned int cu_type  : 16; /* from SenseID */
+        unsigned int cu_model :  8; /* from SenseID */
+        unsigned int dev_type : 16; /* from SenseID */
+        unsigned int dev_model : 8; /* from SenseID */
+        unsigned int open_count; 
+        unsigned int req_queue_len; 
+        unsigned int chanq_len;     /* length of chanq */
+        char type[4];               /* from discipline.name, 'none' for unknown */
+        unsigned int status;        /* current device level */
+        unsigned int label_block;   /* where to find the VOLSER */
+        unsigned int FBA_layout;    /* fixed block size (like AIXVOL) */
+        unsigned int characteristics_size;
+        unsigned int confdata_size;
+        char characteristics[64];   /* from read_device_characteristics */
+        char configuration_data[256]; /* from read_configuration_data */
+} dasd_information_t;
+
+/*
+ * Read Subsystem Data - Performance Statistics
+ */ 
+typedef struct dasd_rssd_perf_stats_t {
+	unsigned char  invalid:1;
+	unsigned char  format:3;
+	unsigned char  data_format:4;
+	unsigned char  unit_address;
+	unsigned short device_status;
+	unsigned int   nr_read_normal;
+	unsigned int   nr_read_normal_hits;
+	unsigned int   nr_write_normal;
+	unsigned int   nr_write_fast_normal_hits;
+	unsigned int   nr_read_seq;
+	unsigned int   nr_read_seq_hits;
+	unsigned int   nr_write_seq;
+	unsigned int   nr_write_fast_seq_hits;
+	unsigned int   nr_read_cache;
+	unsigned int   nr_read_cache_hits;
+	unsigned int   nr_write_cache;
+	unsigned int   nr_write_fast_cache_hits;
+	unsigned int   nr_inhibit_cache;
+	unsigned int   nr_bybass_cache;
+	unsigned int   nr_seq_dasd_to_cache;
+	unsigned int   nr_dasd_to_cache;
+	unsigned int   nr_cache_to_dasd;
+	unsigned int   nr_delayed_fast_write;
+	unsigned int   nr_normal_fast_write;
+	unsigned int   nr_seq_fast_write;
+	unsigned int   nr_cache_miss;
+	unsigned char  status2;
+	unsigned int   nr_quick_write_promotes;
+	unsigned char  reserved;
+	unsigned short ssid;
+	unsigned char  reseved2[96];
+} __attribute__((packed)) dasd_rssd_perf_stats_t;
+
+/* 
+ * struct profile_info_t
+ * holds the profinling information 
+ */
+typedef struct dasd_profile_info_t {
+        unsigned int dasd_io_reqs;	 /* number of requests processed at all */
+        unsigned int dasd_io_sects;	 /* number of sectors processed at all */
+        unsigned int dasd_io_secs[32];	 /* histogram of request's sizes */
+        unsigned int dasd_io_times[32];	 /* histogram of requests's times */
+        unsigned int dasd_io_timps[32];	 /* histogram of requests's times per sector */
+        unsigned int dasd_io_time1[32];	 /* histogram of time from build to start */
+        unsigned int dasd_io_time2[32];	 /* histogram of time from start to irq */
+        unsigned int dasd_io_time2ps[32]; /* histogram of time from start to irq */
+        unsigned int dasd_io_time3[32];	 /* histogram of time from irq to end */
+        unsigned int dasd_io_nr_req[32]; /* histogram of # of requests in chanq */
+} dasd_profile_info_t;
+
+/* 
+ * struct format_data_t
+ * represents all data necessary to format a dasd
+ */
+typedef struct format_data_t {
+	int start_unit; /* from track */
+	int stop_unit;  /* to track */
+	int blksize;    /* sectorsize */
+        int intensity;  
+} format_data_t;
+
+/*
+ * values to be used for format_data_t.intensity
+ * 0/8: normal format
+ * 1/9: also write record zero
+ * 3/11: also write home address
+ * 4/12: invalidate track
+ */
+#define DASD_FMT_INT_FMT_R0 1 /* write record zero */
+#define DASD_FMT_INT_FMT_HA 2 /* write home address, also set FMT_R0 ! */
+#define DASD_FMT_INT_INVAL  4 /* invalidate tracks */
+#define DASD_FMT_INT_COMPAT 8 /* use OS/390 compatible disk layout */
+
+
+/* 
+ * struct attrib_data_t
+ * represents the operation (cache) bits for the device.
+ * Used in DE to influence caching of the DASD.
+ */
+typedef struct attrib_data_t {
+	unsigned char operation:3;     /* cache operation mode */
+	unsigned char reserved:5;      /* cache operation mode */
+	__u16         nr_cyl;          /* no of cyliners for read ahaed */
+	__u8          reserved2[29];   /* for future use */
+} __attribute__ ((packed)) attrib_data_t;
+
+/* definition of operation (cache) bits within attributes of DE */
+#define DASD_NORMAL_CACHE  0x0
+#define DASD_BYPASS_CACHE  0x1
+#define DASD_INHIBIT_LOAD  0x2
+#define DASD_SEQ_ACCESS    0x3
+#define DASD_SEQ_PRESTAGE  0x4
+#define DASD_REC_ACCESS    0x5
+
+
+/********************************************************************************
+ * SECTION: Definition of IOCTLs
+ *
+ * Here ist how the ioctl-nr should be used:
+ *    0 -   31   DASD driver itself
+ *   32 -  239   still open
+ *  240 -  255   reserved for EMC 
+ *******************************************************************************/
+
+/* Disable the volume (for Linux) */
+#define BIODASDDISABLE _IO(DASD_IOCTL_LETTER,0) 
+/* Enable the volume (for Linux) */
+#define BIODASDENABLE  _IO(DASD_IOCTL_LETTER,1)  
+/* Issue a reserve/release command, rsp. */
+#define BIODASDRSRV    _IO(DASD_IOCTL_LETTER,2) /* reserve */
+#define BIODASDRLSE    _IO(DASD_IOCTL_LETTER,3) /* release */
+#define BIODASDSLCK    _IO(DASD_IOCTL_LETTER,4) /* steal lock */
+/* reset profiling information of a device */
+#define BIODASDPRRST   _IO(DASD_IOCTL_LETTER,5)
+/* Quiesce IO on device */
+#define BIODASDQUIESCE _IO(DASD_IOCTL_LETTER,6) 
+/* Resume IO on device */
+#define BIODASDRESUME  _IO(DASD_IOCTL_LETTER,7) 
+
+
+/* retrieve API version number */
+#define DASDAPIVER     _IOR(DASD_IOCTL_LETTER,0,int)
+/* Get information on a dasd device */
+#define BIODASDINFO    _IOR(DASD_IOCTL_LETTER,1,dasd_information_t)
+/* retrieve profiling information of a device */
+#define BIODASDPRRD    _IOR(DASD_IOCTL_LETTER,2,dasd_profile_info_t)
+/* Get information on a dasd device (enhanced) */
+#define BIODASDINFO2   _IOR(DASD_IOCTL_LETTER,3,dasd_information2_t)
+/* Performance Statistics Read */
+#define BIODASDPSRD    _IOR(DASD_IOCTL_LETTER,4,dasd_rssd_perf_stats_t)
+/* Get Attributes (cache operations) */
+#define BIODASDGATTR   _IOR(DASD_IOCTL_LETTER,5,attrib_data_t) 
+
+
+/* #define BIODASDFORMAT  _IOW(IOCTL_LETTER,0,format_data_t) , deprecated */
+#define BIODASDFMT     _IOW(DASD_IOCTL_LETTER,1,format_data_t) 
+/* Set Attributes (cache operations) */
+#define BIODASDSATTR   _IOW(DASD_IOCTL_LETTER,2,attrib_data_t) 
+
+
+#endif				/* DASD_H */
+
+/*
+ * Overrides for Emacs so that we follow Linus's tabbing style.
+ * Emacs will notice this stuff at the end of the file and automatically
+ * adjust the settings for this buffer only.  This must remain at the end
+ * of the file.
+ * ---------------------------------------------------------------------------
+ * Local variables:
+ * c-indent-level: 4 
+ * c-brace-imaginary-offset: 0
+ * c-brace-offset: -4
+ * c-argdecl-indent: 4
+ * c-label-offset: -4
+ * c-continued-statement-offset: 4
+ * c-continued-brace-offset: 0
+ * indent-tabs-mode: nil
+ * tab-width: 8
+ * End:
+ */
diff --git a/arch/s390/include/asm/debug.h b/arch/s390/include/asm/debug.h
new file mode 100644
index 000000000000..9450ce6e32de
--- /dev/null
+++ b/arch/s390/include/asm/debug.h
@@ -0,0 +1,261 @@
+/*
+ *  include/asm-s390/debug.h
+ *   S/390 debug facility
+ *
+ *    Copyright (C) 1999, 2000 IBM Deutschland Entwicklung GmbH,
+ *                             IBM Corporation
+ */
+
+#ifndef DEBUG_H
+#define DEBUG_H
+
+#include <linux/fs.h>
+
+/* Note:
+ * struct __debug_entry must be defined outside of #ifdef __KERNEL__ 
+ * in order to allow a user program to analyze the 'raw'-view.
+ */
+
+struct __debug_entry{
+        union {
+                struct {
+                        unsigned long long clock:52;
+                        unsigned long long exception:1;
+                        unsigned long long level:3;
+                        unsigned long long cpuid:8;
+                } fields;
+
+                unsigned long long stck;
+        } id;
+        void* caller;
+} __attribute__((packed));
+
+
+#define __DEBUG_FEATURE_VERSION      2  /* version of debug feature */
+
+#ifdef __KERNEL__
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/kernel.h>
+#include <linux/time.h>
+
+#define DEBUG_MAX_LEVEL            6  /* debug levels range from 0 to 6 */
+#define DEBUG_OFF_LEVEL            -1 /* level where debug is switched off */
+#define DEBUG_FLUSH_ALL            -1 /* parameter to flush all areas */
+#define DEBUG_MAX_VIEWS            10 /* max number of views in proc fs */
+#define DEBUG_MAX_NAME_LEN         64 /* max length for a debugfs file name */
+#define DEBUG_DEFAULT_LEVEL        3  /* initial debug level */
+
+#define DEBUG_DIR_ROOT "s390dbf" /* name of debug root directory in proc fs */
+
+#define DEBUG_DATA(entry) (char*)(entry + 1) /* data is stored behind */
+                                             /* the entry information */
+
+typedef struct __debug_entry debug_entry_t;
+
+struct debug_view;
+
+typedef struct debug_info {	
+	struct debug_info* next;
+	struct debug_info* prev;
+	atomic_t ref_count;
+	spinlock_t lock;			
+	int level;
+	int nr_areas;
+	int pages_per_area;
+	int buf_size;
+	int entry_size;	
+	debug_entry_t*** areas;
+	int active_area;
+	int *active_pages;
+	int *active_entries;
+	struct dentry* debugfs_root_entry;
+	struct dentry* debugfs_entries[DEBUG_MAX_VIEWS];
+	struct debug_view* views[DEBUG_MAX_VIEWS];	
+	char name[DEBUG_MAX_NAME_LEN];
+	mode_t mode;
+} debug_info_t;
+
+typedef int (debug_header_proc_t) (debug_info_t* id,
+				   struct debug_view* view,
+				   int area,
+				   debug_entry_t* entry,
+				   char* out_buf);
+
+typedef int (debug_format_proc_t) (debug_info_t* id,
+				   struct debug_view* view, char* out_buf,
+				   const char* in_buf);
+typedef int (debug_prolog_proc_t) (debug_info_t* id,
+				   struct debug_view* view,
+				   char* out_buf);
+typedef int (debug_input_proc_t) (debug_info_t* id,
+				  struct debug_view* view,
+				  struct file* file,
+				  const char __user *user_buf,
+				  size_t in_buf_size, loff_t* offset);
+
+int debug_dflt_header_fn(debug_info_t* id, struct debug_view* view,
+		         int area, debug_entry_t* entry, char* out_buf);						
+				
+struct debug_view {
+	char name[DEBUG_MAX_NAME_LEN];
+	debug_prolog_proc_t* prolog_proc;
+	debug_header_proc_t* header_proc;
+	debug_format_proc_t* format_proc;
+	debug_input_proc_t*  input_proc;
+	void*                private_data;
+};
+
+extern struct debug_view debug_hex_ascii_view;
+extern struct debug_view debug_raw_view;
+extern struct debug_view debug_sprintf_view;
+
+/* do NOT use the _common functions */
+
+debug_entry_t* debug_event_common(debug_info_t* id, int level, 
+                                  const void* data, int length);
+
+debug_entry_t* debug_exception_common(debug_info_t* id, int level, 
+                                      const void* data, int length);
+
+/* Debug Feature API: */
+
+debug_info_t *debug_register(const char *name, int pages, int nr_areas,
+                             int buf_size);
+
+debug_info_t *debug_register_mode(const char *name, int pages, int nr_areas,
+				  int buf_size, mode_t mode, uid_t uid,
+				  gid_t gid);
+
+void debug_unregister(debug_info_t* id);
+
+void debug_set_level(debug_info_t* id, int new_level);
+
+void debug_stop_all(void);
+
+static inline debug_entry_t*
+debug_event(debug_info_t* id, int level, void* data, int length)
+{
+	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
+		return NULL;
+        return debug_event_common(id,level,data,length);
+}
+
+static inline debug_entry_t*
+debug_int_event(debug_info_t* id, int level, unsigned int tag)
+{
+        unsigned int t=tag;
+	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
+		return NULL;
+        return debug_event_common(id,level,&t,sizeof(unsigned int));
+}
+
+static inline debug_entry_t *
+debug_long_event (debug_info_t* id, int level, unsigned long tag)
+{
+        unsigned long t=tag;
+	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
+		return NULL;
+        return debug_event_common(id,level,&t,sizeof(unsigned long));
+}
+
+static inline debug_entry_t*
+debug_text_event(debug_info_t* id, int level, const char* txt)
+{
+	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
+		return NULL;
+        return debug_event_common(id,level,txt,strlen(txt));
+}
+
+extern debug_entry_t *
+debug_sprintf_event(debug_info_t* id,int level,char *string,...)
+	__attribute__ ((format(printf, 3, 4)));
+
+
+static inline debug_entry_t*
+debug_exception(debug_info_t* id, int level, void* data, int length)
+{
+	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
+		return NULL;
+        return debug_exception_common(id,level,data,length);
+}
+
+static inline debug_entry_t*
+debug_int_exception(debug_info_t* id, int level, unsigned int tag)
+{
+        unsigned int t=tag;
+	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
+		return NULL;
+        return debug_exception_common(id,level,&t,sizeof(unsigned int));
+}
+
+static inline debug_entry_t *
+debug_long_exception (debug_info_t* id, int level, unsigned long tag)
+{
+        unsigned long t=tag;
+	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
+		return NULL;
+        return debug_exception_common(id,level,&t,sizeof(unsigned long));
+}
+
+static inline debug_entry_t*
+debug_text_exception(debug_info_t* id, int level, const char* txt)
+{
+	if ((!id) || (level > id->level) || (id->pages_per_area == 0))
+		return NULL;
+        return debug_exception_common(id,level,txt,strlen(txt));
+}
+
+
+extern debug_entry_t *
+debug_sprintf_exception(debug_info_t* id,int level,char *string,...)
+	__attribute__ ((format(printf, 3, 4)));
+
+int debug_register_view(debug_info_t* id, struct debug_view* view);
+int debug_unregister_view(debug_info_t* id, struct debug_view* view);
+
+/*
+   define the debug levels:
+   - 0 No debugging output to console or syslog
+   - 1 Log internal errors to syslog, ignore check conditions 
+   - 2 Log internal errors and check conditions to syslog
+   - 3 Log internal errors to console, log check conditions to syslog
+   - 4 Log internal errors and check conditions to console
+   - 5 panic on internal errors, log check conditions to console
+   - 6 panic on both, internal errors and check conditions
+ */
+
+#ifndef DEBUG_LEVEL
+#define DEBUG_LEVEL 4
+#endif
+
+#define INTERNAL_ERRMSG(x,y...) "E" __FILE__ "%d: " x, __LINE__, y
+#define INTERNAL_WRNMSG(x,y...) "W" __FILE__ "%d: " x, __LINE__, y
+#define INTERNAL_INFMSG(x,y...) "I" __FILE__ "%d: " x, __LINE__, y
+#define INTERNAL_DEBMSG(x,y...) "D" __FILE__ "%d: " x, __LINE__, y
+
+#if DEBUG_LEVEL > 0
+#define PRINT_DEBUG(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#define PRINT_INFO(x...) printk ( KERN_INFO PRINTK_HEADER x )
+#define PRINT_WARN(x...) printk ( KERN_WARNING PRINTK_HEADER x )
+#define PRINT_ERR(x...) printk ( KERN_ERR PRINTK_HEADER x )
+#define PRINT_FATAL(x...) panic ( PRINTK_HEADER x )
+#else
+#define PRINT_DEBUG(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#define PRINT_INFO(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#define PRINT_WARN(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#define PRINT_ERR(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#define PRINT_FATAL(x...) printk ( KERN_DEBUG PRINTK_HEADER x )
+#endif				/* DASD_DEBUG */
+
+#undef DEBUG_MALLOC
+#ifdef DEBUG_MALLOC
+void *b;
+#define kmalloc(x...) (PRINT_INFO(" kmalloc %p\n",b=kmalloc(x)),b)
+#define kfree(x) PRINT_INFO(" kfree %p\n",x);kfree(x)
+#define get_zeroed_page(x...) (PRINT_INFO(" gfp %p\n",b=get_zeroed_page(x)),b)
+#define __get_free_pages(x...) (PRINT_INFO(" gfps %p\n",b=__get_free_pages(x)),b)
+#endif				/* DEBUG_MALLOC */
+
+#endif				/* __KERNEL__ */
+#endif				/* DEBUG_H */
diff --git a/arch/s390/include/asm/delay.h b/arch/s390/include/asm/delay.h
new file mode 100644
index 000000000000..78357314c450
--- /dev/null
+++ b/arch/s390/include/asm/delay.h
@@ -0,0 +1,22 @@
+/*
+ *  include/asm-s390/delay.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/delay.h"
+ *    Copyright (C) 1993 Linus Torvalds
+ *
+ *  Delay routines calling functions in arch/s390/lib/delay.c
+ */
+ 
+#ifndef _S390_DELAY_H
+#define _S390_DELAY_H
+
+extern void __udelay(unsigned long usecs);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) __udelay(n)
+
+#endif /* defined(_S390_DELAY_H) */
diff --git a/arch/s390/include/asm/device.h b/arch/s390/include/asm/device.h
new file mode 100644
index 000000000000..d8f9872b0e2d
--- /dev/null
+++ b/arch/s390/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/s390/include/asm/diag.h b/arch/s390/include/asm/diag.h
new file mode 100644
index 000000000000..72b2e2f2d32d
--- /dev/null
+++ b/arch/s390/include/asm/diag.h
@@ -0,0 +1,39 @@
+/*
+ * s390 diagnose functions
+ *
+ * Copyright IBM Corp. 2007
+ * Author(s): Michael Holzheu <holzheu@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_DIAG_H
+#define _ASM_S390_DIAG_H
+
+/*
+ * Diagnose 10: Release pages
+ */
+extern void diag10(unsigned long addr);
+
+/*
+ * Diagnose 14: Input spool file manipulation
+ */
+extern int diag14(unsigned long rx, unsigned long ry1, unsigned long subcode);
+
+/*
+ * Diagnose 210: Get information about a virtual device
+ */
+struct diag210 {
+	u16 vrdcdvno;	/* device number (input) */
+	u16 vrdclen;	/* data block length (input) */
+	u8 vrdcvcla;	/* virtual device class (output) */
+	u8 vrdcvtyp;	/* virtual device type (output) */
+	u8 vrdcvsta;	/* virtual device status (output) */
+	u8 vrdcvfla;	/* virtual device flags (output) */
+	u8 vrdcrccl;	/* real device class (output) */
+	u8 vrdccrty;	/* real device type (output) */
+	u8 vrdccrmd;	/* real device model (output) */
+	u8 vrdccrft;	/* real device feature (output) */
+} __attribute__((packed, aligned(4)));
+
+extern int diag210(struct diag210 *addr);
+
+#endif /* _ASM_S390_DIAG_H */
diff --git a/arch/s390/include/asm/div64.h b/arch/s390/include/asm/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/arch/s390/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/s390/include/asm/dma.h b/arch/s390/include/asm/dma.h
new file mode 100644
index 000000000000..7425c6af6cd4
--- /dev/null
+++ b/arch/s390/include/asm/dma.h
@@ -0,0 +1,16 @@
+/*
+ *  include/asm-s390/dma.h
+ *
+ *  S390 version
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <asm/io.h>		/* need byte IO */
+
+#define MAX_DMA_ADDRESS         0x80000000
+
+#define free_dma(x)	do { } while (0)
+
+#endif /* _ASM_DMA_H */
diff --git a/arch/s390/include/asm/ebcdic.h b/arch/s390/include/asm/ebcdic.h
new file mode 100644
index 000000000000..7f6f641d32f4
--- /dev/null
+++ b/arch/s390/include/asm/ebcdic.h
@@ -0,0 +1,49 @@
+/*
+ *  include/asm-s390/ebcdic.h
+ *    EBCDIC -> ASCII, ASCII -> EBCDIC conversion routines.
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#ifndef _EBCDIC_H
+#define _EBCDIC_H
+
+#ifndef _S390_TYPES_H
+#include <types.h>
+#endif
+
+extern __u8 _ascebc_500[256];   /* ASCII -> EBCDIC 500 conversion table */
+extern __u8 _ebcasc_500[256];   /* EBCDIC 500 -> ASCII conversion table */
+extern __u8 _ascebc[256];   /* ASCII -> EBCDIC conversion table */
+extern __u8 _ebcasc[256];   /* EBCDIC -> ASCII conversion table */
+extern __u8 _ebc_tolower[256]; /* EBCDIC -> lowercase */
+extern __u8 _ebc_toupper[256]; /* EBCDIC -> uppercase */
+
+static inline void
+codepage_convert(const __u8 *codepage, volatile __u8 * addr, unsigned long nr)
+{
+	if (nr-- <= 0)
+		return;
+	asm volatile(
+		"	bras	1,1f\n"
+		"	tr	0(1,%0),0(%2)\n"
+		"0:	tr	0(256,%0),0(%2)\n"
+		"	la	%0,256(%0)\n"
+		"1:	ahi	%1,-256\n"
+		"	jnm	0b\n"
+		"	ex	%1,0(1)"
+		: "+&a" (addr), "+&a" (nr)
+		: "a" (codepage) : "cc", "memory", "1");
+}
+
+#define ASCEBC(addr,nr) codepage_convert(_ascebc, addr, nr)
+#define EBCASC(addr,nr) codepage_convert(_ebcasc, addr, nr)
+#define ASCEBC_500(addr,nr) codepage_convert(_ascebc_500, addr, nr)
+#define EBCASC_500(addr,nr) codepage_convert(_ebcasc_500, addr, nr)
+#define EBC_TOLOWER(addr,nr) codepage_convert(_ebc_tolower, addr, nr)
+#define EBC_TOUPPER(addr,nr) codepage_convert(_ebc_toupper, addr, nr)
+
+#endif
+
diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h
new file mode 100644
index 000000000000..3cad56923815
--- /dev/null
+++ b/arch/s390/include/asm/elf.h
@@ -0,0 +1,196 @@
+/*
+ *  include/asm-s390/elf.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/elf.h"
+ */
+
+#ifndef __ASMS390_ELF_H
+#define __ASMS390_ELF_H
+
+/* s390 relocations defined by the ABIs */
+#define R_390_NONE		0	/* No reloc.  */
+#define R_390_8			1	/* Direct 8 bit.  */
+#define R_390_12		2	/* Direct 12 bit.  */
+#define R_390_16		3	/* Direct 16 bit.  */
+#define R_390_32		4	/* Direct 32 bit.  */
+#define R_390_PC32		5	/* PC relative 32 bit.	*/
+#define R_390_GOT12		6	/* 12 bit GOT offset.  */
+#define R_390_GOT32		7	/* 32 bit GOT offset.  */
+#define R_390_PLT32		8	/* 32 bit PC relative PLT address.  */
+#define R_390_COPY		9	/* Copy symbol at runtime.  */
+#define R_390_GLOB_DAT		10	/* Create GOT entry.  */
+#define R_390_JMP_SLOT		11	/* Create PLT entry.  */
+#define R_390_RELATIVE		12	/* Adjust by program base.  */
+#define R_390_GOTOFF32		13	/* 32 bit offset to GOT.	 */
+#define R_390_GOTPC		14	/* 32 bit PC rel. offset to GOT.  */
+#define R_390_GOT16		15	/* 16 bit GOT offset.  */
+#define R_390_PC16		16	/* PC relative 16 bit.	*/
+#define R_390_PC16DBL		17	/* PC relative 16 bit shifted by 1.  */
+#define R_390_PLT16DBL		18	/* 16 bit PC rel. PLT shifted by 1.  */
+#define R_390_PC32DBL		19	/* PC relative 32 bit shifted by 1.  */
+#define R_390_PLT32DBL		20	/* 32 bit PC rel. PLT shifted by 1.  */
+#define R_390_GOTPCDBL		21	/* 32 bit PC rel. GOT shifted by 1.  */
+#define R_390_64		22	/* Direct 64 bit.  */
+#define R_390_PC64		23	/* PC relative 64 bit.	*/
+#define R_390_GOT64		24	/* 64 bit GOT offset.  */
+#define R_390_PLT64		25	/* 64 bit PC relative PLT address.  */
+#define R_390_GOTENT		26	/* 32 bit PC rel. to GOT entry >> 1. */
+#define R_390_GOTOFF16		27	/* 16 bit offset to GOT. */
+#define R_390_GOTOFF64		28	/* 64 bit offset to GOT. */
+#define R_390_GOTPLT12		29	/* 12 bit offset to jump slot.	*/
+#define R_390_GOTPLT16		30	/* 16 bit offset to jump slot.	*/
+#define R_390_GOTPLT32		31	/* 32 bit offset to jump slot.	*/
+#define R_390_GOTPLT64		32	/* 64 bit offset to jump slot.	*/
+#define R_390_GOTPLTENT		33	/* 32 bit rel. offset to jump slot.  */
+#define R_390_PLTOFF16		34	/* 16 bit offset from GOT to PLT. */
+#define R_390_PLTOFF32		35	/* 32 bit offset from GOT to PLT. */
+#define R_390_PLTOFF64		36	/* 16 bit offset from GOT to PLT. */
+#define R_390_TLS_LOAD		37	/* Tag for load insn in TLS code. */
+#define R_390_TLS_GDCALL	38	/* Tag for function call in general
+                                           dynamic TLS code.  */
+#define R_390_TLS_LDCALL	39	/* Tag for function call in local
+                                           dynamic TLS code.  */
+#define R_390_TLS_GD32		40	/* Direct 32 bit for general dynamic
+                                           thread local data.  */
+#define R_390_TLS_GD64		41	/* Direct 64 bit for general dynamic
+                                           thread local data.  */
+#define R_390_TLS_GOTIE12	42	/* 12 bit GOT offset for static TLS
+                                           block offset.  */
+#define R_390_TLS_GOTIE32	43	/* 32 bit GOT offset for static TLS
+                                           block offset.  */
+#define R_390_TLS_GOTIE64	44	/* 64 bit GOT offset for static TLS
+                                           block offset.  */
+#define R_390_TLS_LDM32		45	/* Direct 32 bit for local dynamic
+                                           thread local data in LD code.  */
+#define R_390_TLS_LDM64		46	/* Direct 64 bit for local dynamic
+                                           thread local data in LD code.  */
+#define R_390_TLS_IE32		47	/* 32 bit address of GOT entry for
+                                           negated static TLS block offset.  */
+#define R_390_TLS_IE64		48	/* 64 bit address of GOT entry for
+                                           negated static TLS block offset.  */
+#define R_390_TLS_IEENT		49	/* 32 bit rel. offset to GOT entry for
+                                           negated static TLS block offset.  */
+#define R_390_TLS_LE32		50	/* 32 bit negated offset relative to
+                                           static TLS block.  */
+#define R_390_TLS_LE64		51	/* 64 bit negated offset relative to
+                                           static TLS block.  */
+#define R_390_TLS_LDO32		52	/* 32 bit offset relative to TLS
+                                           block.  */
+#define R_390_TLS_LDO64		53	/* 64 bit offset relative to TLS
+                                           block.  */
+#define R_390_TLS_DTPMOD	54	/* ID of module containing symbol.  */
+#define R_390_TLS_DTPOFF	55	/* Offset in TLS block.  */
+#define R_390_TLS_TPOFF		56	/* Negate offset in static TLS
+                                           block.  */
+#define R_390_20		57	/* Direct 20 bit.  */
+#define R_390_GOT20		58	/* 20 bit GOT offset.  */
+#define R_390_GOTPLT20		59	/* 20 bit offset to jump slot.  */
+#define R_390_TLS_GOTIE20	60	/* 20 bit GOT offset for static TLS
+					   block offset.  */
+/* Keep this the last entry.  */
+#define R_390_NUM	61
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#ifndef __s390x__
+#define ELF_CLASS	ELFCLASS32
+#else /* __s390x__ */
+#define ELF_CLASS	ELFCLASS64
+#endif /* __s390x__ */
+#define ELF_DATA	ELFDATA2MSB
+#define ELF_ARCH	EM_S390
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+typedef s390_fp_regs elf_fpregset_t;
+typedef s390_regs elf_gregset_t;
+
+typedef s390_fp_regs compat_elf_fpregset_t;
+typedef s390_compat_regs compat_elf_gregset_t;
+
+#include <linux/sched.h>	/* for task_struct */
+#include <asm/system.h>		/* for save_access_regs */
+#include <asm/mmu_context.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) \
+	(((x)->e_machine == EM_S390 || (x)->e_machine == EM_S390_OLD) \
+         && (x)->e_ident[EI_CLASS] == ELF_CLASS) 
+#define compat_elf_check_arch(x) \
+	(((x)->e_machine == EM_S390 || (x)->e_machine == EM_S390_OLD) \
+	 && (x)->e_ident[EI_CLASS] == ELF_CLASS)
+#define compat_start_thread	start_thread31
+
+/* For SVR4/S390 the function pointer to be registered with `atexit` is
+   passed in R14. */
+#define ELF_PLAT_INIT(_r, load_addr) \
+	do { \
+		_r->gprs[14] = 0; \
+	} while (0)
+
+#define CORE_DUMP_USE_REGSET
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+#define ELF_ET_DYN_BASE		(STACK_TOP / 3 * 2)
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports. */
+
+extern unsigned long elf_hwcap;
+#define ELF_HWCAP (elf_hwcap)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM_SIZE 8
+extern char elf_platform[];
+#define ELF_PLATFORM (elf_platform)
+
+#ifndef __s390x__
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+#else /* __s390x__ */
+#define SET_PERSONALITY(ex, ibcs2)			\
+do {							\
+	if (ibcs2)					\
+		set_personality(PER_SVR4);		\
+	else if (current->personality != PER_LINUX32)	\
+		set_personality(PER_LINUX);		\
+	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)	\
+		set_thread_flag(TIF_31BIT);		\
+	else						\
+		clear_thread_flag(TIF_31BIT);		\
+} while (0)
+#endif /* __s390x__ */
+
+/*
+ * An executable for which elf_read_implies_exec() returns TRUE will
+ * have the READ_IMPLIES_EXEC personality flag set automatically.
+ */
+#define elf_read_implies_exec(ex, executable_stack)	\
+({							\
+	if (current->mm->context.noexec &&		\
+	    executable_stack != EXSTACK_DISABLE_X)	\
+		disable_noexec(current->mm, current);	\
+	current->mm->context.noexec == 0;		\
+})
+
+#endif
diff --git a/arch/s390/include/asm/emergency-restart.h b/arch/s390/include/asm/emergency-restart.h
new file mode 100644
index 000000000000..108d8c48e42e
--- /dev/null
+++ b/arch/s390/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/s390/include/asm/errno.h b/arch/s390/include/asm/errno.h
new file mode 100644
index 000000000000..e41d5b37c4d6
--- /dev/null
+++ b/arch/s390/include/asm/errno.h
@@ -0,0 +1,13 @@
+/*
+ *  include/asm-s390/errno.h
+ *
+ *  S390 version
+ *
+ */
+
+#ifndef _S390_ERRNO_H
+#define _S390_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif
diff --git a/arch/s390/include/asm/etr.h b/arch/s390/include/asm/etr.h
new file mode 100644
index 000000000000..80ef58c61970
--- /dev/null
+++ b/arch/s390/include/asm/etr.h
@@ -0,0 +1,258 @@
+/*
+ *  include/asm-s390/etr.h
+ *
+ *  Copyright IBM Corp. 2006
+ *  Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ */
+#ifndef __S390_ETR_H
+#define __S390_ETR_H
+
+/* ETR attachment control register */
+struct etr_eacr {
+	unsigned int e0		: 1;	/* port 0 stepping control */
+	unsigned int e1		: 1;	/* port 1 stepping control */
+	unsigned int _pad0	: 5;	/* must be 00100 */
+	unsigned int dp		: 1;	/* data port control */
+	unsigned int p0		: 1;	/* port 0 change recognition control */
+	unsigned int p1		: 1;	/* port 1 change recognition control */
+	unsigned int _pad1	: 3;	/* must be 000 */
+	unsigned int ea		: 1;	/* ETR alert control */
+	unsigned int es		: 1;	/* ETR sync check control */
+	unsigned int sl		: 1;	/* switch to local control */
+} __attribute__ ((packed));
+
+/* Port state returned by steai */
+enum etr_psc {
+	etr_psc_operational = 0,
+	etr_psc_semi_operational = 1,
+	etr_psc_protocol_error =  4,
+	etr_psc_no_symbols = 8,
+	etr_psc_no_signal = 12,
+	etr_psc_pps_mode = 13
+};
+
+/* Logical port state returned by stetr */
+enum etr_lpsc {
+	etr_lpsc_operational_step = 0,
+	etr_lpsc_operational_alt = 1,
+	etr_lpsc_semi_operational = 2,
+	etr_lpsc_protocol_error =  4,
+	etr_lpsc_no_symbol_sync = 8,
+	etr_lpsc_no_signal = 12,
+	etr_lpsc_pps_mode = 13
+};
+
+/* ETR status words */
+struct etr_esw {
+	struct etr_eacr eacr;		/* attachment control register */
+	unsigned int y		: 1;	/* stepping mode */
+	unsigned int _pad0	: 5;	/* must be 00000 */
+	unsigned int p		: 1;	/* stepping port number */
+	unsigned int q		: 1;	/* data port number */
+	unsigned int psc0	: 4;	/* port 0 state code */
+	unsigned int psc1	: 4;	/* port 1 state code */
+} __attribute__ ((packed));
+
+/* Second level data register status word */
+struct etr_slsw {
+	unsigned int vv1	: 1;	/* copy of validity bit data frame 1 */
+	unsigned int vv2	: 1;	/* copy of validity bit data frame 2 */
+	unsigned int vv3	: 1;	/* copy of validity bit data frame 3 */
+	unsigned int vv4	: 1;	/* copy of validity bit data frame 4 */
+	unsigned int _pad0	: 19;	/* must by all zeroes */
+	unsigned int n		: 1;	/* EAF port number */
+	unsigned int v1		: 1;	/* validity bit ETR data frame 1 */
+	unsigned int v2		: 1;	/* validity bit ETR data frame 2 */
+	unsigned int v3		: 1;	/* validity bit ETR data frame 3 */
+	unsigned int v4		: 1;	/* validity bit ETR data frame 4 */
+	unsigned int _pad1	: 4;	/* must be 0000 */
+} __attribute__ ((packed));
+
+/* ETR data frames */
+struct etr_edf1 {
+	unsigned int u		: 1;	/* untuned bit */
+	unsigned int _pad0	: 1;	/* must be 0 */
+	unsigned int r		: 1;	/* service request bit */
+	unsigned int _pad1	: 4;	/* must be 0000 */
+	unsigned int a		: 1;	/* time adjustment bit */
+	unsigned int net_id	: 8;	/* ETR network id */
+	unsigned int etr_id	: 8;	/* id of ETR which sends data frames */
+	unsigned int etr_pn	: 8;	/* port number of ETR output port */
+} __attribute__ ((packed));
+
+struct etr_edf2 {
+	unsigned int etv	: 32;	/* Upper 32 bits of TOD. */
+} __attribute__ ((packed));
+
+struct etr_edf3 {
+	unsigned int rc		: 8;	/* failure reason code */
+	unsigned int _pad0	: 3;	/* must be 000 */
+	unsigned int c		: 1;	/* ETR coupled bit */
+	unsigned int tc		: 4;	/* ETR type code */
+	unsigned int blto	: 8;	/* biased local time offset */
+					/* (blto - 128) * 15 = minutes */
+	unsigned int buo	: 8;	/* biased utc offset */
+					/* (buo - 128) = leap seconds */
+} __attribute__ ((packed));
+
+struct etr_edf4 {
+	unsigned int ed		: 8;	/* ETS device dependent data */
+	unsigned int _pad0	: 1;	/* must be 0 */
+	unsigned int buc	: 5;	/* biased ut1 correction */
+					/* (buc - 16) * 0.1 seconds */
+	unsigned int em		: 6;	/* ETS error magnitude */
+	unsigned int dc		: 6;	/* ETS drift code */
+	unsigned int sc		: 6;	/* ETS steering code */
+} __attribute__ ((packed));
+
+/*
+ * ETR attachment information block, two formats
+ * format 1 has 4 reserved words with a size of 64 bytes
+ * format 2 has 16 reserved words with a size of 96 bytes
+ */
+struct etr_aib {
+	struct etr_esw esw;
+	struct etr_slsw slsw;
+	unsigned long long tsp;
+	struct etr_edf1 edf1;
+	struct etr_edf2 edf2;
+	struct etr_edf3 edf3;
+	struct etr_edf4 edf4;
+	unsigned int reserved[16];
+} __attribute__ ((packed,aligned(8)));
+
+/* ETR interruption parameter */
+struct etr_irq_parm {
+	unsigned int _pad0	: 8;
+	unsigned int pc0	: 1;	/* port 0 state change */
+	unsigned int pc1	: 1;	/* port 1 state change */
+	unsigned int _pad1	: 3;
+	unsigned int eai	: 1;	/* ETR alert indication */
+	unsigned int _pad2	: 18;
+} __attribute__ ((packed));
+
+/* Query TOD offset result */
+struct etr_ptff_qto {
+	unsigned long long physical_clock;
+	unsigned long long tod_offset;
+	unsigned long long logical_tod_offset;
+	unsigned long long tod_epoch_difference;
+} __attribute__ ((packed));
+
+/* Inline assembly helper functions */
+static inline int etr_setr(struct etr_eacr *ctrl)
+{
+	int rc = -ENOSYS;
+
+	asm volatile(
+		"	.insn	s,0xb2160000,0(%2)\n"
+		"0:	la	%0,0\n"
+		"1:\n"
+		EX_TABLE(0b,1b)
+		: "+d" (rc) : "m" (*ctrl), "a" (ctrl));
+	return rc;
+}
+
+/* Stores a format 1 aib with 64 bytes */
+static inline int etr_stetr(struct etr_aib *aib)
+{
+	int rc = -ENOSYS;
+
+	asm volatile(
+		"	.insn	s,0xb2170000,0(%2)\n"
+		"0:	la	%0,0\n"
+		"1:\n"
+		EX_TABLE(0b,1b)
+		: "+d" (rc) : "m" (*aib), "a" (aib));
+	return rc;
+}
+
+/* Stores a format 2 aib with 96 bytes for specified port */
+static inline int etr_steai(struct etr_aib *aib, unsigned int func)
+{
+	register unsigned int reg0 asm("0") = func;
+	int rc = -ENOSYS;
+
+	asm volatile(
+		"	.insn	s,0xb2b30000,0(%2)\n"
+		"0:	la	%0,0\n"
+		"1:\n"
+		EX_TABLE(0b,1b)
+		: "+d" (rc) : "m" (*aib), "a" (aib), "d" (reg0));
+	return rc;
+}
+
+/* Function codes for the steai instruction. */
+#define ETR_STEAI_STEPPING_PORT		0x10
+#define ETR_STEAI_ALTERNATE_PORT	0x11
+#define ETR_STEAI_PORT_0		0x12
+#define ETR_STEAI_PORT_1		0x13
+
+static inline int etr_ptff(void *ptff_block, unsigned int func)
+{
+	register unsigned int reg0 asm("0") = func;
+	register unsigned long reg1 asm("1") = (unsigned long) ptff_block;
+	int rc = -ENOSYS;
+
+	asm volatile(
+		"	.word	0x0104\n"
+		"	ipm	%0\n"
+		"	srl	%0,28\n"
+		: "=d" (rc), "=m" (ptff_block)
+		: "d" (reg0), "d" (reg1), "m" (ptff_block) : "cc");
+	return rc;
+}
+
+/* Function codes for the ptff instruction. */
+#define ETR_PTFF_QAF	0x00	/* query available functions */
+#define ETR_PTFF_QTO	0x01	/* query tod offset */
+#define ETR_PTFF_QSI	0x02	/* query steering information */
+#define ETR_PTFF_ATO	0x40	/* adjust tod offset */
+#define ETR_PTFF_STO	0x41	/* set tod offset */
+#define ETR_PTFF_SFS	0x42	/* set fine steering rate */
+#define ETR_PTFF_SGS	0x43	/* set gross steering rate */
+
+/* Functions needed by the machine check handler */
+void etr_switch_to_local(void);
+void etr_sync_check(void);
+
+/* STP interruption parameter */
+struct stp_irq_parm {
+	unsigned int _pad0	: 14;
+	unsigned int tsc	: 1;	/* Timing status change */
+	unsigned int lac	: 1;	/* Link availability change */
+	unsigned int tcpc	: 1;	/* Time control parameter change */
+	unsigned int _pad2	: 15;
+} __attribute__ ((packed));
+
+#define STP_OP_SYNC	1
+#define STP_OP_CTRL	3
+
+struct stp_sstpi {
+	unsigned int rsvd0;
+	unsigned int rsvd1 : 8;
+	unsigned int stratum : 8;
+	unsigned int vbits : 16;
+	unsigned int leaps : 16;
+	unsigned int tmd : 4;
+	unsigned int ctn : 4;
+	unsigned int rsvd2 : 3;
+	unsigned int c : 1;
+	unsigned int tst : 4;
+	unsigned int tzo : 16;
+	unsigned int dsto : 16;
+	unsigned int ctrl : 16;
+	unsigned int rsvd3 : 16;
+	unsigned int tto;
+	unsigned int rsvd4;
+	unsigned int ctnid[3];
+	unsigned int rsvd5;
+	unsigned int todoff[4];
+	unsigned int rsvd6[48];
+} __attribute__ ((packed));
+
+/* Functions needed by the machine check handler */
+void stp_sync_check(void);
+void stp_island_check(void);
+
+#endif /* __S390_ETR_H */
diff --git a/arch/s390/include/asm/extmem.h b/arch/s390/include/asm/extmem.h
new file mode 100644
index 000000000000..33837d756184
--- /dev/null
+++ b/arch/s390/include/asm/extmem.h
@@ -0,0 +1,33 @@
+/*
+ *  include/asm-s390x/extmem.h
+ *
+ *  definitions for external memory segment support
+ *  Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ */
+
+#ifndef _ASM_S390X_DCSS_H
+#define _ASM_S390X_DCSS_H
+#ifndef __ASSEMBLY__
+
+/* possible values for segment type as returned by segment_info */
+#define SEG_TYPE_SW 0
+#define SEG_TYPE_EW 1
+#define SEG_TYPE_SR 2
+#define SEG_TYPE_ER 3
+#define SEG_TYPE_SN 4
+#define SEG_TYPE_EN 5
+#define SEG_TYPE_SC 6
+#define SEG_TYPE_EWEN 7
+
+#define SEGMENT_SHARED 0
+#define SEGMENT_EXCLUSIVE 1
+
+int segment_load (char *name, int segtype, unsigned long *addr, unsigned long *length);
+void segment_unload(char *name);
+void segment_save(char *name);
+int segment_type (char* name);
+int segment_modify_shared (char *name, int do_nonshared);
+void segment_warning(int rc, char *seg_name);
+
+#endif
+#endif
diff --git a/arch/s390/include/asm/fb.h b/arch/s390/include/asm/fb.h
new file mode 100644
index 000000000000..c7df38030992
--- /dev/null
+++ b/arch/s390/include/asm/fb.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/s390/include/asm/fcntl.h b/arch/s390/include/asm/fcntl.h
new file mode 100644
index 000000000000..46ab12db5739
--- /dev/null
+++ b/arch/s390/include/asm/fcntl.h
@@ -0,0 +1 @@
+#include <asm-generic/fcntl.h>
diff --git a/arch/s390/include/asm/fcx.h b/arch/s390/include/asm/fcx.h
new file mode 100644
index 000000000000..8be1f3a58042
--- /dev/null
+++ b/arch/s390/include/asm/fcx.h
@@ -0,0 +1,311 @@
+/*
+ *  Functions for assembling fcx enabled I/O control blocks.
+ *
+ *    Copyright IBM Corp. 2008
+ *    Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_FCX_H
+#define _ASM_S390_FCX_H _ASM_S390_FCX_H
+
+#include <linux/types.h>
+
+#define TCW_FORMAT_DEFAULT		0
+#define TCW_TIDAW_FORMAT_DEFAULT	0
+#define TCW_FLAGS_INPUT_TIDA		1 << (23 - 5)
+#define TCW_FLAGS_TCCB_TIDA		1 << (23 - 6)
+#define TCW_FLAGS_OUTPUT_TIDA		1 << (23 - 7)
+#define TCW_FLAGS_TIDAW_FORMAT(x)	((x) & 3) << (23 - 9)
+#define TCW_FLAGS_GET_TIDAW_FORMAT(x)	(((x) >> (23 - 9)) & 3)
+
+/**
+ * struct tcw - Transport Control Word (TCW)
+ * @format: TCW format
+ * @flags: TCW flags
+ * @tccbl: Transport-Command-Control-Block Length
+ * @r: Read Operations
+ * @w: Write Operations
+ * @output: Output-Data Address
+ * @input: Input-Data Address
+ * @tsb: Transport-Status-Block Address
+ * @tccb: Transport-Command-Control-Block Address
+ * @output_count: Output Count
+ * @input_count: Input Count
+ * @intrg: Interrogate TCW Address
+ */
+struct tcw {
+	u32 format:2;
+	u32 :6;
+	u32 flags:24;
+	u32 :8;
+	u32 tccbl:6;
+	u32 r:1;
+	u32 w:1;
+	u32 :16;
+	u64 output;
+	u64 input;
+	u64 tsb;
+	u64 tccb;
+	u32 output_count;
+	u32 input_count;
+	u32 :32;
+	u32 :32;
+	u32 :32;
+	u32 intrg;
+} __attribute__ ((packed, aligned(64)));
+
+#define TIDAW_FLAGS_LAST		1 << (7 - 0)
+#define TIDAW_FLAGS_SKIP		1 << (7 - 1)
+#define TIDAW_FLAGS_DATA_INT		1 << (7 - 2)
+#define TIDAW_FLAGS_TTIC		1 << (7 - 3)
+#define TIDAW_FLAGS_INSERT_CBC		1 << (7 - 4)
+
+/**
+ * struct tidaw - Transport-Indirect-Addressing Word (TIDAW)
+ * @flags: TIDAW flags. Can be an arithmetic OR of the following constants:
+ * %TIDAW_FLAGS_LAST, %TIDAW_FLAGS_SKIP, %TIDAW_FLAGS_DATA_INT,
+ * %TIDAW_FLAGS_TTIC, %TIDAW_FLAGS_INSERT_CBC
+ * @count: Count
+ * @addr: Address
+ */
+struct tidaw {
+	u32 flags:8;
+	u32 :24;
+	u32 count;
+	u64 addr;
+} __attribute__ ((packed, aligned(16)));
+
+/**
+ * struct tsa_iostat - I/O-Status Transport-Status Area (IO-Stat TSA)
+ * @dev_time: Device Time
+ * @def_time: Defer Time
+ * @queue_time: Queue Time
+ * @dev_busy_time: Device-Busy Time
+ * @dev_act_time: Device-Active-Only Time
+ * @sense: Sense Data (if present)
+ */
+struct tsa_iostat {
+	u32 dev_time;
+	u32 def_time;
+	u32 queue_time;
+	u32 dev_busy_time;
+	u32 dev_act_time;
+	u8 sense[32];
+} __attribute__ ((packed));
+
+/**
+ * struct tsa_ddpcs - Device-Detected-Program-Check Transport-Status Area (DDPC TSA)
+ * @rc: Reason Code
+ * @rcq: Reason Code Qualifier
+ * @sense: Sense Data (if present)
+ */
+struct tsa_ddpc {
+	u32 :24;
+	u32 rc:8;
+	u8 rcq[16];
+	u8 sense[32];
+} __attribute__ ((packed));
+
+#define TSA_INTRG_FLAGS_CU_STATE_VALID		1 << (7 - 0)
+#define TSA_INTRG_FLAGS_DEV_STATE_VALID		1 << (7 - 1)
+#define TSA_INTRG_FLAGS_OP_STATE_VALID		1 << (7 - 2)
+
+/**
+ * struct tsa_intrg - Interrogate Transport-Status Area (Intrg. TSA)
+ * @format: Format
+ * @flags: Flags. Can be an arithmetic OR of the following constants:
+ * %TSA_INTRG_FLAGS_CU_STATE_VALID, %TSA_INTRG_FLAGS_DEV_STATE_VALID,
+ * %TSA_INTRG_FLAGS_OP_STATE_VALID
+ * @cu_state: Controle-Unit State
+ * @dev_state: Device State
+ * @op_state: Operation State
+ * @sd_info: State-Dependent Information
+ * @dl_id: Device-Level Identifier
+ * @dd_data: Device-Dependent Data
+ */
+struct tsa_intrg {
+	u32 format:8;
+	u32 flags:8;
+	u32 cu_state:8;
+	u32 dev_state:8;
+	u32 op_state:8;
+	u32 :24;
+	u8 sd_info[12];
+	u32 dl_id;
+	u8 dd_data[28];
+} __attribute__ ((packed));
+
+#define TSB_FORMAT_NONE		0
+#define TSB_FORMAT_IOSTAT	1
+#define TSB_FORMAT_DDPC		2
+#define TSB_FORMAT_INTRG	3
+
+#define TSB_FLAGS_DCW_OFFSET_VALID	1 << (7 - 0)
+#define TSB_FLAGS_COUNT_VALID		1 << (7 - 1)
+#define TSB_FLAGS_CACHE_MISS		1 << (7 - 2)
+#define TSB_FLAGS_TIME_VALID		1 << (7 - 3)
+#define TSB_FLAGS_FORMAT(x)		((x) & 7)
+#define TSB_FORMAT(t)			((t)->flags & 7)
+
+/**
+ * struct tsb - Transport-Status Block (TSB)
+ * @length: Length
+ * @flags: Flags. Can be an arithmetic OR of the following constants:
+ * %TSB_FLAGS_DCW_OFFSET_VALID, %TSB_FLAGS_COUNT_VALID, %TSB_FLAGS_CACHE_MISS,
+ * %TSB_FLAGS_TIME_VALID
+ * @dcw_offset: DCW Offset
+ * @count: Count
+ * @tsa: Transport-Status-Area
+ */
+struct tsb {
+	u32 length:8;
+	u32 flags:8;
+	u32 dcw_offset:16;
+	u32 count;
+	u32 :32;
+	union {
+		struct tsa_iostat iostat;
+		struct tsa_ddpc ddpc;
+		struct tsa_intrg intrg;
+	} __attribute__ ((packed)) tsa;
+} __attribute__ ((packed, aligned(8)));
+
+#define DCW_INTRG_FORMAT_DEFAULT	0
+
+#define DCW_INTRG_RC_UNSPECIFIED	0
+#define DCW_INTRG_RC_TIMEOUT		1
+
+#define DCW_INTRG_RCQ_UNSPECIFIED	0
+#define DCW_INTRG_RCQ_PRIMARY		1
+#define DCW_INTRG_RCQ_SECONDARY		2
+
+#define DCW_INTRG_FLAGS_MPM		1 < (7 - 0)
+#define DCW_INTRG_FLAGS_PPR		1 < (7 - 1)
+#define DCW_INTRG_FLAGS_CRIT		1 < (7 - 2)
+
+/**
+ * struct dcw_intrg_data - Interrogate DCW data
+ * @format: Format. Should be %DCW_INTRG_FORMAT_DEFAULT
+ * @rc: Reason Code. Can be one of %DCW_INTRG_RC_UNSPECIFIED,
+ * %DCW_INTRG_RC_TIMEOUT
+ * @rcq: Reason Code Qualifier: Can be one of %DCW_INTRG_RCQ_UNSPECIFIED,
+ * %DCW_INTRG_RCQ_PRIMARY, %DCW_INTRG_RCQ_SECONDARY
+ * @lpm: Logical-Path Mask
+ * @pam: Path-Available Mask
+ * @pim: Path-Installed Mask
+ * @timeout: Timeout
+ * @flags: Flags. Can be an arithmetic OR of %DCW_INTRG_FLAGS_MPM,
+ * %DCW_INTRG_FLAGS_PPR, %DCW_INTRG_FLAGS_CRIT
+ * @time: Time
+ * @prog_id: Program Identifier
+ * @prog_data: Program-Dependent Data
+ */
+struct dcw_intrg_data {
+	u32 format:8;
+	u32 rc:8;
+	u32 rcq:8;
+	u32 lpm:8;
+	u32 pam:8;
+	u32 pim:8;
+	u32 timeout:16;
+	u32 flags:8;
+	u32 :24;
+	u32 :32;
+	u64 time;
+	u64 prog_id;
+	u8  prog_data[0];
+} __attribute__ ((packed));
+
+#define DCW_FLAGS_CC		1 << (7 - 1)
+
+#define DCW_CMD_WRITE		0x01
+#define DCW_CMD_READ		0x02
+#define DCW_CMD_CONTROL		0x03
+#define DCW_CMD_SENSE		0x04
+#define DCW_CMD_SENSE_ID	0xe4
+#define DCW_CMD_INTRG		0x40
+
+/**
+ * struct dcw - Device-Command Word (DCW)
+ * @cmd: Command Code. Can be one of %DCW_CMD_WRITE, %DCW_CMD_READ,
+ * %DCW_CMD_CONTROL, %DCW_CMD_SENSE, %DCW_CMD_SENSE_ID, %DCW_CMD_INTRG
+ * @flags: Flags. Can be an arithmetic OR of %DCW_FLAGS_CC
+ * @cd_count: Control-Data Count
+ * @count: Count
+ * @cd: Control Data
+ */
+struct dcw {
+	u32 cmd:8;
+	u32 flags:8;
+	u32 :8;
+	u32 cd_count:8;
+	u32 count;
+	u8 cd[0];
+} __attribute__ ((packed));
+
+#define TCCB_FORMAT_DEFAULT	0x7f
+#define TCCB_MAX_DCW		30
+#define TCCB_MAX_SIZE		(sizeof(struct tccb_tcah) + \
+				 TCCB_MAX_DCW * sizeof(struct dcw) + \
+				 sizeof(struct tccb_tcat))
+#define TCCB_SAC_DEFAULT	0xf901
+#define TCCB_SAC_INTRG		0xf902
+
+/**
+ * struct tccb_tcah - Transport-Command-Area Header (TCAH)
+ * @format: Format. Should be %TCCB_FORMAT_DEFAULT
+ * @tcal: Transport-Command-Area Length
+ * @sac: Service-Action Code. Can be one of %TCCB_SAC_DEFAULT, %TCCB_SAC_INTRG
+ * @prio: Priority
+ */
+struct tccb_tcah {
+	u32 format:8;
+	u32 :24;
+	u32 :24;
+	u32 tcal:8;
+	u32 sac:16;
+	u32 :8;
+	u32 prio:8;
+	u32 :32;
+} __attribute__ ((packed));
+
+/**
+ * struct tccb_tcat - Transport-Command-Area Trailer (TCAT)
+ * @count: Transport Count
+ */
+struct tccb_tcat {
+	u32 :32;
+	u32 count;
+} __attribute__ ((packed));
+
+/**
+ * struct tccb - (partial) Transport-Command-Control Block (TCCB)
+ * @tcah: TCAH
+ * @tca: Transport-Command Area
+ */
+struct tccb {
+	struct tccb_tcah tcah;
+	u8 tca[0];
+} __attribute__ ((packed, aligned(8)));
+
+struct tcw *tcw_get_intrg(struct tcw *tcw);
+void *tcw_get_data(struct tcw *tcw);
+struct tccb *tcw_get_tccb(struct tcw *tcw);
+struct tsb *tcw_get_tsb(struct tcw *tcw);
+
+void tcw_init(struct tcw *tcw, int r, int w);
+void tcw_finalize(struct tcw *tcw, int num_tidaws);
+
+void tcw_set_intrg(struct tcw *tcw, struct tcw *intrg_tcw);
+void tcw_set_data(struct tcw *tcw, void *data, int use_tidal);
+void tcw_set_tccb(struct tcw *tcw, struct tccb *tccb);
+void tcw_set_tsb(struct tcw *tcw, struct tsb *tsb);
+
+void tccb_init(struct tccb *tccb, size_t tccb_size, u32 sac);
+void tsb_init(struct tsb *tsb);
+struct dcw *tccb_add_dcw(struct tccb *tccb, size_t tccb_size, u8 cmd, u8 flags,
+			 void *cd, u8 cd_count, u32 count);
+struct tidaw *tcw_add_tidaw(struct tcw *tcw, int num_tidaws, u8 flags,
+			    void *addr, u32 count);
+
+#endif /* _ASM_S390_FCX_H */
diff --git a/arch/s390/include/asm/futex.h b/arch/s390/include/asm/futex.h
new file mode 100644
index 000000000000..5c5d02de49e9
--- /dev/null
+++ b/arch/s390/include/asm/futex.h
@@ -0,0 +1,52 @@
+#ifndef _ASM_S390_FUTEX_H
+#define _ASM_S390_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval, ret;
+
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();
+	ret = uaccess.futex_atomic_op(op, uaddr, oparg, &oldval);
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int futex_atomic_cmpxchg_inatomic(int __user *uaddr,
+						int oldval, int newval)
+{
+	if (! access_ok (VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	return uaccess.futex_atomic_cmpxchg(uaddr, oldval, newval);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_S390_FUTEX_H */
diff --git a/arch/s390/include/asm/hardirq.h b/arch/s390/include/asm/hardirq.h
new file mode 100644
index 000000000000..89ec7056da28
--- /dev/null
+++ b/arch/s390/include/asm/hardirq.h
@@ -0,0 +1,51 @@
+/*
+ *  include/asm-s390/hardirq.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *               Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
+ *
+ *  Derived from "include/asm-i386/hardirq.h"
+ */
+
+#ifndef __ASM_HARDIRQ_H
+#define __ASM_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/sched.h>
+#include <linux/cache.h>
+#include <linux/interrupt.h>
+#include <asm/lowcore.h>
+
+/* irq_cpustat_t is unused currently, but could be converted
+ * into a percpu variable instead of storing softirq_pending
+ * on the lowcore */
+typedef struct {
+	unsigned int __softirq_pending;
+} irq_cpustat_t;
+
+#define local_softirq_pending() (S390_lowcore.softirq_pending)
+
+#define __ARCH_IRQ_STAT
+#define __ARCH_HAS_DO_SOFTIRQ
+
+#define HARDIRQ_BITS	8
+
+void clock_comparator_work(void);
+
+static inline unsigned long long local_tick_disable(void)
+{
+	unsigned long long old;
+
+	old = S390_lowcore.clock_comparator;
+	S390_lowcore.clock_comparator = -1ULL;
+	return old;
+}
+
+static inline void local_tick_enable(unsigned long long comp)
+{
+	S390_lowcore.clock_comparator = comp;
+}
+
+#endif /* __ASM_HARDIRQ_H */
diff --git a/arch/s390/include/asm/hugetlb.h b/arch/s390/include/asm/hugetlb.h
new file mode 100644
index 000000000000..670a1d1745d2
--- /dev/null
+++ b/arch/s390/include/asm/hugetlb.h
@@ -0,0 +1,184 @@
+/*
+ *  IBM System z Huge TLB Page Support for Kernel.
+ *
+ *    Copyright IBM Corp. 2008
+ *    Author(s): Gerald Schaefer <gerald.schaefer@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_HUGETLB_H
+#define _ASM_S390_HUGETLB_H
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+
+#define is_hugepage_only_range(mm, addr, len)	0
+#define hugetlb_free_pgd_range			free_pgd_range
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t pte);
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
+{
+	if (len & ~HPAGE_MASK)
+		return -EINVAL;
+	if (addr & ~HPAGE_MASK)
+		return -EINVAL;
+	return 0;
+}
+
+#define hugetlb_prefault_arch_hook(mm)		do { } while (0)
+
+int arch_prepare_hugepage(struct page *page);
+void arch_release_hugepage(struct page *page);
+
+static inline pte_t pte_mkhuge(pte_t pte)
+{
+	/*
+	 * PROT_NONE needs to be remapped from the pte type to the ste type.
+	 * The HW invalid bit is also different for pte and ste. The pte
+	 * invalid bit happens to be the same as the ste _SEGMENT_ENTRY_LARGE
+	 * bit, so we don't have to clear it.
+	 */
+	if (pte_val(pte) & _PAGE_INVALID) {
+		if (pte_val(pte) & _PAGE_SWT)
+			pte_val(pte) |= _HPAGE_TYPE_NONE;
+		pte_val(pte) |= _SEGMENT_ENTRY_INV;
+	}
+	/*
+	 * Clear SW pte bits SWT and SWX, there are no SW bits in a segment
+	 * table entry.
+	 */
+	pte_val(pte) &= ~(_PAGE_SWT | _PAGE_SWX);
+	/*
+	 * Also set the change-override bit because we don't need dirty bit
+	 * tracking for hugetlbfs pages.
+	 */
+	pte_val(pte) |= (_SEGMENT_ENTRY_LARGE | _SEGMENT_ENTRY_CO);
+	return pte;
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_RO;
+	return pte;
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return (pte_val(pte) & _SEGMENT_ENTRY_INV) &&
+		!(pte_val(pte) & _SEGMENT_ENTRY_RO);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	pte_t pte = *ptep;
+	unsigned long mask;
+
+	if (!MACHINE_HAS_HPAGE) {
+		ptep = (pte_t *) (pte_val(pte) & _SEGMENT_ENTRY_ORIGIN);
+		if (ptep) {
+			mask = pte_val(pte) &
+				(_SEGMENT_ENTRY_INV | _SEGMENT_ENTRY_RO);
+			pte = pte_mkhuge(*ptep);
+			pte_val(pte) |= mask;
+		}
+	}
+	return pte;
+}
+
+static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+					    unsigned long addr, pte_t *ptep)
+{
+	pte_t pte = huge_ptep_get(ptep);
+
+	pmd_clear((pmd_t *) ptep);
+	return pte;
+}
+
+static inline void __pmd_csp(pmd_t *pmdp)
+{
+	register unsigned long reg2 asm("2") = pmd_val(*pmdp);
+	register unsigned long reg3 asm("3") = pmd_val(*pmdp) |
+					       _SEGMENT_ENTRY_INV;
+	register unsigned long reg4 asm("4") = ((unsigned long) pmdp) + 5;
+
+	asm volatile(
+		"	csp %1,%3"
+		: "=m" (*pmdp)
+		: "d" (reg2), "d" (reg3), "d" (reg4), "m" (*pmdp) : "cc");
+	pmd_val(*pmdp) = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY;
+}
+
+static inline void __pmd_idte(unsigned long address, pmd_t *pmdp)
+{
+	unsigned long sto = (unsigned long) pmdp -
+				pmd_index(address) * sizeof(pmd_t);
+
+	if (!(pmd_val(*pmdp) & _SEGMENT_ENTRY_INV)) {
+		asm volatile(
+			"	.insn	rrf,0xb98e0000,%2,%3,0,0"
+			: "=m" (*pmdp)
+			: "m" (*pmdp), "a" (sto),
+			  "a" ((address & HPAGE_MASK))
+		);
+	}
+	pmd_val(*pmdp) = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY;
+}
+
+static inline void huge_ptep_invalidate(struct mm_struct *mm,
+					unsigned long address, pte_t *ptep)
+{
+	pmd_t *pmdp = (pmd_t *) ptep;
+
+	if (!MACHINE_HAS_IDTE) {
+		__pmd_csp(pmdp);
+		if (mm->context.noexec) {
+			pmdp = get_shadow_table(pmdp);
+			__pmd_csp(pmdp);
+		}
+		return;
+	}
+
+	__pmd_idte(address, pmdp);
+	if (mm->context.noexec) {
+		pmdp = get_shadow_table(pmdp);
+		__pmd_idte(address, pmdp);
+	}
+	return;
+}
+
+#define huge_ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \
+({									    \
+	int __changed = !pte_same(huge_ptep_get(__ptep), __entry);	    \
+	if (__changed) {						    \
+		huge_ptep_invalidate((__vma)->vm_mm, __addr, __ptep);	    \
+		set_huge_pte_at((__vma)->vm_mm, __addr, __ptep, __entry);   \
+	}								    \
+	__changed;							    \
+})
+
+#define huge_ptep_set_wrprotect(__mm, __addr, __ptep)			\
+({									\
+	pte_t __pte = huge_ptep_get(__ptep);				\
+	if (pte_write(__pte)) {						\
+		if (atomic_read(&(__mm)->mm_users) > 1 ||		\
+		    (__mm) != current->active_mm)			\
+			huge_ptep_invalidate(__mm, __addr, __ptep);	\
+		set_huge_pte_at(__mm, __addr, __ptep,			\
+				huge_pte_wrprotect(__pte));		\
+	}								\
+})
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long address, pte_t *ptep)
+{
+	huge_ptep_invalidate(vma->vm_mm, address, ptep);
+}
+
+#endif /* _ASM_S390_HUGETLB_H */
diff --git a/arch/s390/include/asm/idals.h b/arch/s390/include/asm/idals.h
new file mode 100644
index 000000000000..e82c10efe65a
--- /dev/null
+++ b/arch/s390/include/asm/idals.h
@@ -0,0 +1,256 @@
+/* 
+ * File...........: linux/include/asm-s390x/idals.h
+ * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
+ *		    Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Bugreports.to..: <Linux390@de.ibm.com>
+ * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 2000a
+ 
+ * History of changes
+ * 07/24/00 new file
+ * 05/04/02 code restructuring.
+ */
+
+#ifndef _S390_IDALS_H
+#define _S390_IDALS_H
+
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/cio.h>
+#include <asm/uaccess.h>
+
+#ifdef __s390x__
+#define IDA_SIZE_LOG 12 /* 11 for 2k , 12 for 4k */
+#else
+#define IDA_SIZE_LOG 11 /* 11 for 2k , 12 for 4k */
+#endif
+#define IDA_BLOCK_SIZE (1L<<IDA_SIZE_LOG)
+
+/*
+ * Test if an address/length pair needs an idal list.
+ */
+static inline int
+idal_is_needed(void *vaddr, unsigned int length)
+{
+#ifdef __s390x__
+	return ((__pa(vaddr) + length - 1) >> 31) != 0;
+#else
+	return 0;
+#endif
+}
+
+
+/*
+ * Return the number of idal words needed for an address/length pair.
+ */
+static inline unsigned int
+idal_nr_words(void *vaddr, unsigned int length)
+{
+#ifdef __s390x__
+	if (idal_is_needed(vaddr, length))
+		return ((__pa(vaddr) & (IDA_BLOCK_SIZE-1)) + length + 
+			(IDA_BLOCK_SIZE-1)) >> IDA_SIZE_LOG;
+#endif
+	return 0;
+}
+
+/*
+ * Create the list of idal words for an address/length pair.
+ */
+static inline unsigned long *
+idal_create_words(unsigned long *idaws, void *vaddr, unsigned int length)
+{
+#ifdef __s390x__
+	unsigned long paddr;
+	unsigned int cidaw;
+
+	paddr = __pa(vaddr);
+	cidaw = ((paddr & (IDA_BLOCK_SIZE-1)) + length + 
+		 (IDA_BLOCK_SIZE-1)) >> IDA_SIZE_LOG;
+	*idaws++ = paddr;
+	paddr &= -IDA_BLOCK_SIZE;
+	while (--cidaw > 0) {
+		paddr += IDA_BLOCK_SIZE;
+		*idaws++ = paddr;
+	}
+#endif
+	return idaws;
+}
+
+/*
+ * Sets the address of the data in CCW.
+ * If necessary it allocates an IDAL and sets the appropriate flags.
+ */
+static inline int
+set_normalized_cda(struct ccw1 * ccw, void *vaddr)
+{
+#ifdef __s390x__
+	unsigned int nridaws;
+	unsigned long *idal;
+
+	if (ccw->flags & CCW_FLAG_IDA)
+		return -EINVAL;
+	nridaws = idal_nr_words(vaddr, ccw->count);
+	if (nridaws > 0) {
+		idal = kmalloc(nridaws * sizeof(unsigned long),
+			       GFP_ATOMIC | GFP_DMA );
+		if (idal == NULL)
+			return -ENOMEM;
+		idal_create_words(idal, vaddr, ccw->count);
+		ccw->flags |= CCW_FLAG_IDA;
+		vaddr = idal;
+	}
+#endif
+	ccw->cda = (__u32)(unsigned long) vaddr;
+	return 0;
+}
+
+/*
+ * Releases any allocated IDAL related to the CCW.
+ */
+static inline void
+clear_normalized_cda(struct ccw1 * ccw)
+{
+#ifdef __s390x__
+	if (ccw->flags & CCW_FLAG_IDA) {
+		kfree((void *)(unsigned long) ccw->cda);
+		ccw->flags &= ~CCW_FLAG_IDA;
+	}
+#endif
+	ccw->cda = 0;
+}
+
+/*
+ * Idal buffer extension
+ */
+struct idal_buffer {
+	size_t size;
+	size_t page_order;
+	void *data[0];
+};
+
+/*
+ * Allocate an idal buffer
+ */
+static inline struct idal_buffer *
+idal_buffer_alloc(size_t size, int page_order)
+{
+	struct idal_buffer *ib;
+	int nr_chunks, nr_ptrs, i;
+
+	nr_ptrs = (size + IDA_BLOCK_SIZE - 1) >> IDA_SIZE_LOG;
+	nr_chunks = (4096 << page_order) >> IDA_SIZE_LOG;
+	ib = kmalloc(sizeof(struct idal_buffer) + nr_ptrs*sizeof(void *),
+		     GFP_DMA | GFP_KERNEL);
+	if (ib == NULL)
+		return ERR_PTR(-ENOMEM);
+	ib->size = size;
+	ib->page_order = page_order;
+	for (i = 0; i < nr_ptrs; i++) {
+		if ((i & (nr_chunks - 1)) != 0) {
+			ib->data[i] = ib->data[i-1] + IDA_BLOCK_SIZE;
+			continue;
+		}
+		ib->data[i] = (void *)
+			__get_free_pages(GFP_KERNEL, page_order);
+		if (ib->data[i] != NULL)
+			continue;
+		// Not enough memory
+		while (i >= nr_chunks) {
+			i -= nr_chunks;
+			free_pages((unsigned long) ib->data[i],
+				   ib->page_order);
+		}
+		kfree(ib);
+		return ERR_PTR(-ENOMEM);
+	}
+	return ib;
+}
+
+/*
+ * Free an idal buffer.
+ */
+static inline void
+idal_buffer_free(struct idal_buffer *ib)
+{
+	int nr_chunks, nr_ptrs, i;
+
+	nr_ptrs = (ib->size + IDA_BLOCK_SIZE - 1) >> IDA_SIZE_LOG;
+	nr_chunks = (4096 << ib->page_order) >> IDA_SIZE_LOG;
+	for (i = 0; i < nr_ptrs; i += nr_chunks)
+		free_pages((unsigned long) ib->data[i], ib->page_order);
+	kfree(ib);
+}
+
+/*
+ * Test if a idal list is really needed.
+ */
+static inline int
+__idal_buffer_is_needed(struct idal_buffer *ib)
+{
+#ifdef __s390x__
+	return ib->size > (4096ul << ib->page_order) ||
+		idal_is_needed(ib->data[0], ib->size);
+#else
+	return ib->size > (4096ul << ib->page_order);
+#endif
+}
+
+/*
+ * Set channel data address to idal buffer.
+ */
+static inline void
+idal_buffer_set_cda(struct idal_buffer *ib, struct ccw1 *ccw)
+{
+	if (__idal_buffer_is_needed(ib)) {
+		// setup idals;
+		ccw->cda = (u32)(addr_t) ib->data;
+		ccw->flags |= CCW_FLAG_IDA;
+	} else
+		// we do not need idals - use direct addressing
+		ccw->cda = (u32)(addr_t) ib->data[0];
+	ccw->count = ib->size;
+}
+
+/*
+ * Copy count bytes from an idal buffer to user memory
+ */
+static inline size_t
+idal_buffer_to_user(struct idal_buffer *ib, void __user *to, size_t count)
+{
+	size_t left;
+	int i;
+
+	BUG_ON(count > ib->size);
+	for (i = 0; count > IDA_BLOCK_SIZE; i++) {
+		left = copy_to_user(to, ib->data[i], IDA_BLOCK_SIZE);
+		if (left)
+			return left + count - IDA_BLOCK_SIZE;
+		to = (void __user *) to + IDA_BLOCK_SIZE;
+		count -= IDA_BLOCK_SIZE;
+	}
+	return copy_to_user(to, ib->data[i], count);
+}
+
+/*
+ * Copy count bytes from user memory to an idal buffer
+ */
+static inline size_t
+idal_buffer_from_user(struct idal_buffer *ib, const void __user *from, size_t count)
+{
+	size_t left;
+	int i;
+
+	BUG_ON(count > ib->size);
+	for (i = 0; count > IDA_BLOCK_SIZE; i++) {
+		left = copy_from_user(ib->data[i], from, IDA_BLOCK_SIZE);
+		if (left)
+			return left + count - IDA_BLOCK_SIZE;
+		from = (void __user *) from + IDA_BLOCK_SIZE;
+		count -= IDA_BLOCK_SIZE;
+	}
+	return copy_from_user(ib->data[i], from, count);
+}
+
+#endif
diff --git a/arch/s390/include/asm/io.h b/arch/s390/include/asm/io.h
new file mode 100644
index 000000000000..b7ff6afc3caa
--- /dev/null
+++ b/arch/s390/include/asm/io.h
@@ -0,0 +1,54 @@
+/*
+ *  include/asm-s390/io.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/io.h"
+ */
+
+#ifndef _S390_IO_H
+#define _S390_IO_H
+
+#ifdef __KERNEL__
+
+#include <asm/page.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ * These are pretty trivial
+ */
+static inline unsigned long virt_to_phys(volatile void * address)
+{
+	unsigned long real_address;
+	asm volatile(
+		 "	lra	%0,0(%1)\n"
+		 "	jz	0f\n"
+		 "	la	%0,0\n"
+                 "0:"
+		 : "=a" (real_address) : "a" (address) : "cc");
+        return real_address;
+}
+
+static inline void * phys_to_virt(unsigned long address)
+{
+	return (void *) address;
+}
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/s390/include/asm/ioctl.h b/arch/s390/include/asm/ioctl.h
new file mode 100644
index 000000000000..b279fe06dfe5
--- /dev/null
+++ b/arch/s390/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/s390/include/asm/ioctls.h b/arch/s390/include/asm/ioctls.h
new file mode 100644
index 000000000000..40e481b1b461
--- /dev/null
+++ b/arch/s390/include/asm/ioctls.h
@@ -0,0 +1,92 @@
+/*
+ *  include/asm-s390/ioctls.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/ioctls.h"
+ */
+
+#ifndef __ARCH_S390_IOCTLS_H__
+#define __ARCH_S390_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TCGETS2		_IOR('T',0x2A, struct termios2)
+#define TCSETS2		_IOW('T',0x2B, struct termios2)
+#define TCSETSW2	_IOW('T',0x2C, struct termios2)
+#define TCSETSF2	_IOW('T',0x2D, struct termios2)
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define FIOQSIZE	0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif
diff --git a/arch/s390/include/asm/ipcbuf.h b/arch/s390/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..37f293d12c8f
--- /dev/null
+++ b/arch/s390/include/asm/ipcbuf.h
@@ -0,0 +1,31 @@
+#ifndef __S390_IPCBUF_H__
+#define __S390_IPCBUF_H__
+
+/*
+ * The user_ipc_perm structure for S/390 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+#ifndef __s390x__
+	unsigned short		__pad2;
+#endif /* ! __s390x__ */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __S390_IPCBUF_H__ */
diff --git a/arch/s390/include/asm/ipl.h b/arch/s390/include/asm/ipl.h
new file mode 100644
index 000000000000..1171e6d144a3
--- /dev/null
+++ b/arch/s390/include/asm/ipl.h
@@ -0,0 +1,168 @@
+/*
+ * s390 (re)ipl support
+ *
+ * Copyright IBM Corp. 2007
+ */
+
+#ifndef _ASM_S390_IPL_H
+#define _ASM_S390_IPL_H
+
+#include <asm/types.h>
+#include <asm/cio.h>
+#include <asm/setup.h>
+
+#define IPL_PARMBLOCK_ORIGIN	0x2000
+
+#define IPL_PARM_BLK_FCP_LEN (sizeof(struct ipl_list_hdr) + \
+			      sizeof(struct ipl_block_fcp))
+
+#define IPL_PARM_BLK0_FCP_LEN (sizeof(struct ipl_block_fcp) + 8)
+
+#define IPL_PARM_BLK_CCW_LEN (sizeof(struct ipl_list_hdr) + \
+			      sizeof(struct ipl_block_ccw))
+
+#define IPL_PARM_BLK0_CCW_LEN (sizeof(struct ipl_block_ccw) + 8)
+
+#define IPL_MAX_SUPPORTED_VERSION (0)
+
+#define IPL_PARMBLOCK_START	((struct ipl_parameter_block *) \
+				 IPL_PARMBLOCK_ORIGIN)
+#define IPL_PARMBLOCK_SIZE	(IPL_PARMBLOCK_START->hdr.len)
+
+struct ipl_list_hdr {
+	u32 len;
+	u8  reserved1[3];
+	u8  version;
+	u32 blk0_len;
+	u8  pbt;
+	u8  flags;
+	u16 reserved2;
+} __attribute__((packed));
+
+struct ipl_block_fcp {
+	u8  reserved1[313-1];
+	u8  opt;
+	u8  reserved2[3];
+	u16 reserved3;
+	u16 devno;
+	u8  reserved4[4];
+	u64 wwpn;
+	u64 lun;
+	u32 bootprog;
+	u8  reserved5[12];
+	u64 br_lba;
+	u32 scp_data_len;
+	u8  reserved6[260];
+	u8  scp_data[];
+} __attribute__((packed));
+
+#define DIAG308_VMPARM_SIZE	64
+
+struct ipl_block_ccw {
+	u8  load_parm[8];
+	u8  reserved1[84];
+	u8  reserved2[2];
+	u16 devno;
+	u8  vm_flags;
+	u8  reserved3[3];
+	u32 vm_parm_len;
+	u8  nss_name[8];
+	u8  vm_parm[DIAG308_VMPARM_SIZE];
+	u8  reserved4[8];
+} __attribute__((packed));
+
+struct ipl_parameter_block {
+	struct ipl_list_hdr hdr;
+	union {
+		struct ipl_block_fcp fcp;
+		struct ipl_block_ccw ccw;
+	} ipl_info;
+} __attribute__((packed,aligned(4096)));
+
+/*
+ * IPL validity flags
+ */
+extern u32 ipl_flags;
+extern u32 dump_prefix_page;
+extern unsigned int zfcpdump_prefix_array[];
+
+extern void do_reipl(void);
+extern void do_halt(void);
+extern void do_poff(void);
+extern void ipl_save_parameters(void);
+extern void ipl_update_parameters(void);
+extern void get_ipl_vmparm(char *);
+
+enum {
+	IPL_DEVNO_VALID		= 1,
+	IPL_PARMBLOCK_VALID	= 2,
+	IPL_NSS_VALID		= 4,
+};
+
+enum ipl_type {
+	IPL_TYPE_UNKNOWN	= 1,
+	IPL_TYPE_CCW		= 2,
+	IPL_TYPE_FCP		= 4,
+	IPL_TYPE_FCP_DUMP	= 8,
+	IPL_TYPE_NSS		= 16,
+};
+
+struct ipl_info
+{
+	enum ipl_type type;
+	union {
+		struct {
+			struct ccw_dev_id dev_id;
+		} ccw;
+		struct {
+			struct ccw_dev_id dev_id;
+			u64 wwpn;
+			u64 lun;
+		} fcp;
+		struct {
+			char name[NSS_NAME_SIZE + 1];
+		} nss;
+	} data;
+};
+
+extern struct ipl_info ipl_info;
+extern void setup_ipl(void);
+
+/*
+ * DIAG 308 support
+ */
+enum diag308_subcode  {
+	DIAG308_REL_HSA	= 2,
+	DIAG308_IPL	= 3,
+	DIAG308_DUMP	= 4,
+	DIAG308_SET	= 5,
+	DIAG308_STORE	= 6,
+};
+
+enum diag308_ipl_type {
+	DIAG308_IPL_TYPE_FCP	= 0,
+	DIAG308_IPL_TYPE_CCW	= 2,
+};
+
+enum diag308_opt {
+	DIAG308_IPL_OPT_IPL	= 0x10,
+	DIAG308_IPL_OPT_DUMP	= 0x20,
+};
+
+enum diag308_flags {
+	DIAG308_FLAGS_LP_VALID	= 0x80,
+};
+
+enum diag308_vm_flags {
+	DIAG308_VM_FLAGS_NSS_VALID	= 0x80,
+	DIAG308_VM_FLAGS_VP_VALID	= 0x40,
+};
+
+enum diag308_rc {
+	DIAG308_RC_OK		= 0x0001,
+	DIAG308_RC_NOCONFIG	= 0x0102,
+};
+
+extern int diag308(unsigned long subcode, void *addr);
+
+#endif /* _ASM_S390_IPL_H */
diff --git a/arch/s390/include/asm/irq.h b/arch/s390/include/asm/irq.h
new file mode 100644
index 000000000000..7da991a858f8
--- /dev/null
+++ b/arch/s390/include/asm/irq.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_IRQ_H
+#define _ASM_IRQ_H
+
+#ifdef __KERNEL__
+#include <linux/hardirq.h>
+
+/*
+ * the definition of irqs has changed in 2.5.46:
+ * NR_IRQS is no longer the number of i/o
+ * interrupts (65536), but rather the number
+ * of interrupt classes (2).
+ * Only external and i/o interrupts make much sense here (CH).
+ */
+
+enum interruption_class {
+	EXTERNAL_INTERRUPT,
+	IO_INTERRUPT,
+
+	NR_IRQS,
+};
+
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/s390/include/asm/irq_regs.h b/arch/s390/include/asm/irq_regs.h
new file mode 100644
index 000000000000..3dd9c0b70270
--- /dev/null
+++ b/arch/s390/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/s390/include/asm/irqflags.h b/arch/s390/include/asm/irqflags.h
new file mode 100644
index 000000000000..3f26131120b7
--- /dev/null
+++ b/arch/s390/include/asm/irqflags.h
@@ -0,0 +1,106 @@
+/*
+ *  include/asm-s390/irqflags.h
+ *
+ *    Copyright (C) IBM Corp. 2006
+ *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ */
+
+#ifndef __ASM_IRQFLAGS_H
+#define __ASM_IRQFLAGS_H
+
+#ifdef __KERNEL__
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+
+/* store then or system mask. */
+#define __raw_local_irq_stosm(__or)					\
+({									\
+	unsigned long __mask;						\
+	asm volatile(							\
+		"	stosm	%0,%1"					\
+		: "=Q" (__mask) : "i" (__or) : "memory");		\
+	__mask;								\
+})
+
+/* store then and system mask. */
+#define __raw_local_irq_stnsm(__and)					\
+({									\
+	unsigned long __mask;						\
+	asm volatile(							\
+		"	stnsm	%0,%1"					\
+		: "=Q" (__mask) : "i" (__and) : "memory");		\
+	__mask;								\
+})
+
+/* set system mask. */
+#define __raw_local_irq_ssm(__mask)					\
+({									\
+	asm volatile("ssm   %0" : : "Q" (__mask) : "memory");		\
+})
+
+#else /* __GNUC__ */
+
+/* store then or system mask. */
+#define __raw_local_irq_stosm(__or)					\
+({									\
+	unsigned long __mask;						\
+	asm volatile(							\
+		"	stosm	0(%1),%2"				\
+		: "=m" (__mask)						\
+		: "a" (&__mask), "i" (__or) : "memory");		\
+	__mask;								\
+})
+
+/* store then and system mask. */
+#define __raw_local_irq_stnsm(__and)					\
+({									\
+	unsigned long __mask;						\
+	asm volatile(							\
+		"	stnsm	0(%1),%2"				\
+		: "=m" (__mask)						\
+		: "a" (&__mask), "i" (__and) : "memory");		\
+	__mask;								\
+})
+
+/* set system mask. */
+#define __raw_local_irq_ssm(__mask)					\
+({									\
+	asm volatile(							\
+		"	ssm	0(%0)"					\
+		: : "a" (&__mask), "m" (__mask) : "memory");		\
+})
+
+#endif /* __GNUC__ */
+
+/* interrupt control.. */
+static inline unsigned long raw_local_irq_enable(void)
+{
+	return __raw_local_irq_stosm(0x03);
+}
+
+static inline unsigned long raw_local_irq_disable(void)
+{
+	return __raw_local_irq_stnsm(0xfc);
+}
+
+#define raw_local_save_flags(x)						\
+do {									\
+	typecheck(unsigned long, x);					\
+	(x) = __raw_local_irq_stosm(0x00);				\
+} while (0)
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	__raw_local_irq_ssm(flags);
+}
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return !(flags & (3UL << (BITS_PER_LONG - 8)));
+}
+
+/* For spinlocks etc */
+#define raw_local_irq_save(x)	((x) = raw_local_irq_disable())
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_IRQFLAGS_H */
diff --git a/arch/s390/include/asm/isc.h b/arch/s390/include/asm/isc.h
new file mode 100644
index 000000000000..34bb8916db4f
--- /dev/null
+++ b/arch/s390/include/asm/isc.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_S390_ISC_H
+#define _ASM_S390_ISC_H
+
+#include <linux/types.h>
+
+/*
+ * I/O interruption subclasses used by drivers.
+ * Please add all used iscs here so that it is possible to distribute
+ * isc usage between drivers.
+ * Reminder: 0 is highest priority, 7 lowest.
+ */
+#define MAX_ISC 7
+
+/* Regular I/O interrupts. */
+#define IO_SCH_ISC 3			/* regular I/O subchannels */
+#define CONSOLE_ISC 1			/* console I/O subchannel */
+#define CHSC_SCH_ISC 7			/* CHSC subchannels */
+/* Adapter interrupts. */
+#define QDIO_AIRQ_ISC IO_SCH_ISC	/* I/O subchannel in qdio mode */
+
+/* Functions for registration of I/O interruption subclasses */
+void isc_register(unsigned int isc);
+void isc_unregister(unsigned int isc);
+
+#endif /* _ASM_S390_ISC_H */
diff --git a/arch/s390/include/asm/itcw.h b/arch/s390/include/asm/itcw.h
new file mode 100644
index 000000000000..a9bc5c36b32a
--- /dev/null
+++ b/arch/s390/include/asm/itcw.h
@@ -0,0 +1,30 @@
+/*
+ *  Functions for incremental construction of fcx enabled I/O control blocks.
+ *
+ *    Copyright IBM Corp. 2008
+ *    Author(s): Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_ITCW_H
+#define _ASM_S390_ITCW_H _ASM_S390_ITCW_H
+
+#include <linux/types.h>
+#include <asm/fcx.h>
+
+#define ITCW_OP_READ	0
+#define ITCW_OP_WRITE	1
+
+struct itcw;
+
+struct tcw *itcw_get_tcw(struct itcw *itcw);
+size_t itcw_calc_size(int intrg, int max_tidaws, int intrg_max_tidaws);
+struct itcw *itcw_init(void *buffer, size_t size, int op, int intrg,
+		       int max_tidaws, int intrg_max_tidaws);
+struct dcw *itcw_add_dcw(struct itcw *itcw, u8 cmd, u8 flags, void *cd,
+			 u8 cd_count, u32 count);
+struct tidaw *itcw_add_tidaw(struct itcw *itcw, u8 flags, void *addr,
+			     u32 count);
+void itcw_set_data(struct itcw *itcw, void *addr, int use_tidal);
+void itcw_finalize(struct itcw *itcw);
+
+#endif /* _ASM_S390_ITCW_H */
diff --git a/arch/s390/include/asm/kdebug.h b/arch/s390/include/asm/kdebug.h
new file mode 100644
index 000000000000..40db27cd6e60
--- /dev/null
+++ b/arch/s390/include/asm/kdebug.h
@@ -0,0 +1,27 @@
+#ifndef _S390_KDEBUG_H
+#define _S390_KDEBUG_H
+
+/*
+ * Feb 2006 Ported to s390 <grundym@us.ibm.com>
+ */
+
+struct pt_regs;
+
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_BPT,
+	DIE_SSTEP,
+	DIE_PANIC,
+	DIE_NMI,
+	DIE_DIE,
+	DIE_NMIWATCHDOG,
+	DIE_KERNELDEBUG,
+	DIE_TRAP,
+	DIE_GPF,
+	DIE_CALL,
+	DIE_NMI_IPI,
+};
+
+extern void die(const char *, struct pt_regs *, long);
+
+#endif
diff --git a/arch/s390/include/asm/kexec.h b/arch/s390/include/asm/kexec.h
new file mode 100644
index 000000000000..f219c6411e0b
--- /dev/null
+++ b/arch/s390/include/asm/kexec.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-s390/kexec.h
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * Author(s): Rolf Adelsberger <adelsberger@de.ibm.com>
+ *
+ */
+
+#ifndef _S390_KEXEC_H
+#define _S390_KEXEC_H
+
+#ifdef __KERNEL__
+#include <asm/page.h>
+#endif
+#include <asm/processor.h>
+/*
+ * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
+ * I.e. Maximum page that is mapped directly into kernel memory,
+ * and kmap is not required.
+ */
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+
+/* Maximum address we can use for the control pages */
+/* Not more than 2GB */
+#define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31)
+
+/* Allocate one page for the pdp and the second for the code */
+#define KEXEC_CONTROL_CODE_SIZE 4096
+
+/* The native architecture */
+#define KEXEC_ARCH KEXEC_ARCH_S390
+
+/* Provide a dummy definition to avoid build failures. */
+static inline void crash_setup_regs(struct pt_regs *newregs,
+					struct pt_regs *oldregs) { }
+
+#endif /*_S390_KEXEC_H */
diff --git a/arch/s390/include/asm/kmap_types.h b/arch/s390/include/asm/kmap_types.h
new file mode 100644
index 000000000000..fd1574648223
--- /dev/null
+++ b/arch/s390/include/asm/kmap_types.h
@@ -0,0 +1,23 @@
+#ifdef __KERNEL__
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,	
+	KM_TYPE_NR
+};
+
+#endif
+#endif /* __KERNEL__ */
diff --git a/arch/s390/include/asm/kprobes.h b/arch/s390/include/asm/kprobes.h
new file mode 100644
index 000000000000..330f68caffe4
--- /dev/null
+++ b/arch/s390/include/asm/kprobes.h
@@ -0,0 +1,103 @@
+#ifndef _ASM_S390_KPROBES_H
+#define _ASM_S390_KPROBES_H
+/*
+ *  Kernel Probes (KProbes)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) IBM Corporation, 2002, 2006
+ *
+ * 2002-Oct	Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
+ *		Probes initial implementation ( includes suggestions from
+ *		Rusty Russell).
+ * 2004-Nov	Modified for PPC64 by Ananth N Mavinakayanahalli
+ *		<ananth@in.ibm.com>
+ * 2005-Dec	Used as a template for s390 by Mike Grundy
+ *		<grundym@us.ibm.com>
+ */
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/percpu.h>
+
+#define  __ARCH_WANT_KPROBES_INSN_SLOT
+struct pt_regs;
+struct kprobe;
+
+typedef u16 kprobe_opcode_t;
+#define BREAKPOINT_INSTRUCTION	0x0002
+
+/* Maximum instruction size is 3 (16bit) halfwords: */
+#define MAX_INSN_SIZE		0x0003
+#define MAX_STACK_SIZE		64
+#define MIN_STACK_SIZE(ADDR) (((MAX_STACK_SIZE) < \
+	(((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR))) \
+	? (MAX_STACK_SIZE) \
+	: (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
+
+#define kretprobe_blacklist_size 0
+
+#define KPROBE_SWAP_INST	0x10
+
+#define FIXUP_PSW_NORMAL	0x08
+#define FIXUP_BRANCH_NOT_TAKEN	0x04
+#define FIXUP_RETURN_REGISTER	0x02
+#define FIXUP_NOT_REQUIRED	0x01
+
+/* Architecture specific copy of original instruction */
+struct arch_specific_insn {
+	/* copy of original instruction */
+	kprobe_opcode_t *insn;
+	int fixup;
+	int ilen;
+	int reg;
+};
+
+struct ins_replace_args {
+	kprobe_opcode_t *ptr;
+	kprobe_opcode_t old;
+	kprobe_opcode_t new;
+};
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+	unsigned long saved_psw;
+	unsigned long kprobe_saved_imask;
+	unsigned long kprobe_saved_ctl[3];
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	unsigned long kprobe_saved_imask;
+	unsigned long kprobe_saved_ctl[3];
+	struct pt_regs jprobe_saved_regs;
+	unsigned long jprobe_saved_r14;
+	unsigned long jprobe_saved_r15;
+	struct prev_kprobe prev_kprobe;
+	kprobe_opcode_t jprobes_stack[MAX_STACK_SIZE];
+};
+
+void arch_remove_kprobe(struct kprobe *p);
+void kretprobe_trampoline(void);
+int  is_prohibited_opcode(kprobe_opcode_t *instruction);
+void get_instruction_type(struct arch_specific_insn *ainsn);
+
+int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+int kprobe_exceptions_notify(struct notifier_block *self,
+	unsigned long val, void *data);
+
+#define flush_insn_slot(p)	do { } while (0)
+
+#endif	/* _ASM_S390_KPROBES_H */
diff --git a/arch/s390/include/asm/kvm.h b/arch/s390/include/asm/kvm.h
new file mode 100644
index 000000000000..d74002f95794
--- /dev/null
+++ b/arch/s390/include/asm/kvm.h
@@ -0,0 +1,45 @@
+#ifndef __LINUX_KVM_S390_H
+#define __LINUX_KVM_S390_H
+
+/*
+ * asm-s390/kvm.h - KVM s390 specific structures and definitions
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ *    Author(s): Carsten Otte <cotte@de.ibm.com>
+ *               Christian Borntraeger <borntraeger@de.ibm.com>
+ */
+#include <asm/types.h>
+
+/* for KVM_GET_IRQCHIP and KVM_SET_IRQCHIP */
+struct kvm_pic_state {
+	/* no PIC for s390 */
+};
+
+struct kvm_ioapic_state {
+	/* no IOAPIC for s390 */
+};
+
+/* for KVM_GET_REGS and KVM_SET_REGS */
+struct kvm_regs {
+	/* general purpose regs for s390 */
+	__u64 gprs[16];
+};
+
+/* for KVM_GET_SREGS and KVM_SET_SREGS */
+struct kvm_sregs {
+	__u32 acrs[16];
+	__u64 crs[16];
+};
+
+/* for KVM_GET_FPU and KVM_SET_FPU */
+struct kvm_fpu {
+	__u32 fpc;
+	__u64 fprs[16];
+};
+
+#endif
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
new file mode 100644
index 000000000000..3c55e4107dcc
--- /dev/null
+++ b/arch/s390/include/asm/kvm_host.h
@@ -0,0 +1,235 @@
+/*
+ * asm-s390/kvm_host.h - definition for kernel virtual machines on s390
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ *    Author(s): Carsten Otte <cotte@de.ibm.com>
+ */
+
+
+#ifndef ASM_KVM_HOST_H
+#define ASM_KVM_HOST_H
+#include <linux/kvm_host.h>
+#include <asm/debug.h>
+
+#define KVM_MAX_VCPUS 64
+#define KVM_MEMORY_SLOTS 32
+/* memory slots that does not exposed to userspace */
+#define KVM_PRIVATE_MEM_SLOTS 4
+
+struct kvm_guest_debug {
+};
+
+struct sca_entry {
+	atomic_t scn;
+	__u64	reserved;
+	__u64	sda;
+	__u64	reserved2[2];
+} __attribute__((packed));
+
+
+struct sca_block {
+	__u64	ipte_control;
+	__u64	reserved[5];
+	__u64	mcn;
+	__u64	reserved2;
+	struct sca_entry cpu[64];
+} __attribute__((packed));
+
+#define KVM_PAGES_PER_HPAGE 256
+
+#define CPUSTAT_HOST       0x80000000
+#define CPUSTAT_WAIT       0x10000000
+#define CPUSTAT_ECALL_PEND 0x08000000
+#define CPUSTAT_STOP_INT   0x04000000
+#define CPUSTAT_IO_INT     0x02000000
+#define CPUSTAT_EXT_INT    0x01000000
+#define CPUSTAT_RUNNING    0x00800000
+#define CPUSTAT_RETAINED   0x00400000
+#define CPUSTAT_TIMING_SUB 0x00020000
+#define CPUSTAT_SIE_SUB    0x00010000
+#define CPUSTAT_RRF        0x00008000
+#define CPUSTAT_SLSV       0x00004000
+#define CPUSTAT_SLSR       0x00002000
+#define CPUSTAT_ZARCH      0x00000800
+#define CPUSTAT_MCDS       0x00000100
+#define CPUSTAT_SM         0x00000080
+#define CPUSTAT_G          0x00000008
+#define CPUSTAT_J          0x00000002
+#define CPUSTAT_P          0x00000001
+
+struct kvm_s390_sie_block {
+	atomic_t cpuflags;		/* 0x0000 */
+	__u32	prefix;			/* 0x0004 */
+	__u8	reserved8[32];		/* 0x0008 */
+	__u64	cputm;			/* 0x0028 */
+	__u64	ckc;			/* 0x0030 */
+	__u64	epoch;			/* 0x0038 */
+	__u8	reserved40[4];		/* 0x0040 */
+#define LCTL_CR0	0x8000
+	__u16   lctl;			/* 0x0044 */
+	__s16	icpua;			/* 0x0046 */
+	__u32	ictl;			/* 0x0048 */
+	__u32	eca;			/* 0x004c */
+	__u8	icptcode;		/* 0x0050 */
+	__u8	reserved51;		/* 0x0051 */
+	__u16	ihcpu;			/* 0x0052 */
+	__u8	reserved54[2];		/* 0x0054 */
+	__u16	ipa;			/* 0x0056 */
+	__u32	ipb;			/* 0x0058 */
+	__u32	scaoh;			/* 0x005c */
+	__u8	reserved60;		/* 0x0060 */
+	__u8	ecb;			/* 0x0061 */
+	__u8	reserved62[2];		/* 0x0062 */
+	__u32	scaol;			/* 0x0064 */
+	__u8	reserved68[4];		/* 0x0068 */
+	__u32	todpr;			/* 0x006c */
+	__u8	reserved70[16];		/* 0x0070 */
+	__u64	gmsor;			/* 0x0080 */
+	__u64	gmslm;			/* 0x0088 */
+	psw_t	gpsw;			/* 0x0090 */
+	__u64	gg14;			/* 0x00a0 */
+	__u64	gg15;			/* 0x00a8 */
+	__u8	reservedb0[30];		/* 0x00b0 */
+	__u16   iprcc;			/* 0x00ce */
+	__u8	reservedd0[48];		/* 0x00d0 */
+	__u64	gcr[16];		/* 0x0100 */
+	__u64	gbea;			/* 0x0180 */
+	__u8	reserved188[120];	/* 0x0188 */
+} __attribute__((packed));
+
+struct kvm_vcpu_stat {
+	u32 exit_userspace;
+	u32 exit_null;
+	u32 exit_external_request;
+	u32 exit_external_interrupt;
+	u32 exit_stop_request;
+	u32 exit_validity;
+	u32 exit_instruction;
+	u32 instruction_lctl;
+	u32 instruction_lctlg;
+	u32 exit_program_interruption;
+	u32 exit_instr_and_program;
+	u32 deliver_emergency_signal;
+	u32 deliver_service_signal;
+	u32 deliver_virtio_interrupt;
+	u32 deliver_stop_signal;
+	u32 deliver_prefix_signal;
+	u32 deliver_restart_signal;
+	u32 deliver_program_int;
+	u32 exit_wait_state;
+	u32 instruction_stidp;
+	u32 instruction_spx;
+	u32 instruction_stpx;
+	u32 instruction_stap;
+	u32 instruction_storage_key;
+	u32 instruction_stsch;
+	u32 instruction_chsc;
+	u32 instruction_stsi;
+	u32 instruction_stfl;
+	u32 instruction_sigp_sense;
+	u32 instruction_sigp_emergency;
+	u32 instruction_sigp_stop;
+	u32 instruction_sigp_arch;
+	u32 instruction_sigp_prefix;
+	u32 instruction_sigp_restart;
+	u32 diagnose_44;
+};
+
+struct kvm_s390_io_info {
+	__u16        subchannel_id;            /* 0x0b8 */
+	__u16        subchannel_nr;            /* 0x0ba */
+	__u32        io_int_parm;              /* 0x0bc */
+	__u32        io_int_word;              /* 0x0c0 */
+};
+
+struct kvm_s390_ext_info {
+	__u32 ext_params;
+	__u64 ext_params2;
+};
+
+#define PGM_OPERATION            0x01
+#define PGM_PRIVILEGED_OPERATION 0x02
+#define PGM_EXECUTE              0x03
+#define PGM_PROTECTION           0x04
+#define PGM_ADDRESSING           0x05
+#define PGM_SPECIFICATION        0x06
+#define PGM_DATA                 0x07
+
+struct kvm_s390_pgm_info {
+	__u16 code;
+};
+
+struct kvm_s390_prefix_info {
+	__u32 address;
+};
+
+struct kvm_s390_interrupt_info {
+	struct list_head list;
+	u64	type;
+	union {
+		struct kvm_s390_io_info io;
+		struct kvm_s390_ext_info ext;
+		struct kvm_s390_pgm_info pgm;
+		struct kvm_s390_prefix_info prefix;
+	};
+};
+
+/* for local_interrupt.action_flags */
+#define ACTION_STORE_ON_STOP 1
+#define ACTION_STOP_ON_STOP  2
+
+struct kvm_s390_local_interrupt {
+	spinlock_t lock;
+	struct list_head list;
+	atomic_t active;
+	struct kvm_s390_float_interrupt *float_int;
+	int timer_due; /* event indicator for waitqueue below */
+	wait_queue_head_t wq;
+	atomic_t *cpuflags;
+	unsigned int action_bits;
+};
+
+struct kvm_s390_float_interrupt {
+	spinlock_t lock;
+	struct list_head list;
+	atomic_t active;
+	int next_rr_cpu;
+	unsigned long idle_mask [(64 + sizeof(long) - 1) / sizeof(long)];
+	struct kvm_s390_local_interrupt *local_int[64];
+};
+
+
+struct kvm_vcpu_arch {
+	struct kvm_s390_sie_block *sie_block;
+	unsigned long	  guest_gprs[16];
+	s390_fp_regs      host_fpregs;
+	unsigned int      host_acrs[NUM_ACRS];
+	s390_fp_regs      guest_fpregs;
+	unsigned int      guest_acrs[NUM_ACRS];
+	struct kvm_s390_local_interrupt local_int;
+	struct timer_list ckc_timer;
+	union  {
+		cpuid_t	  cpu_id;
+		u64	  stidp_data;
+	};
+};
+
+struct kvm_vm_stat {
+	u32 remote_tlb_flush;
+};
+
+struct kvm_arch{
+	unsigned long guest_origin;
+	unsigned long guest_memsize;
+	struct sca_block *sca;
+	debug_info_t *dbf;
+	struct kvm_s390_float_interrupt float_int;
+};
+
+extern int sie64a(struct kvm_s390_sie_block *, unsigned long *);
+#endif
diff --git a/arch/s390/include/asm/kvm_para.h b/arch/s390/include/asm/kvm_para.h
new file mode 100644
index 000000000000..2c503796b619
--- /dev/null
+++ b/arch/s390/include/asm/kvm_para.h
@@ -0,0 +1,150 @@
+/*
+ * asm-s390/kvm_para.h - definition for paravirtual devices on s390
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ *    Author(s): Christian Borntraeger <borntraeger@de.ibm.com>
+ */
+
+#ifndef __S390_KVM_PARA_H
+#define __S390_KVM_PARA_H
+
+/*
+ * Hypercalls for KVM on s390. The calling convention is similar to the
+ * s390 ABI, so we use R2-R6 for parameters 1-5. In addition we use R1
+ * as hypercall number and R7 as parameter 6. The return value is
+ * written to R2. We use the diagnose instruction as hypercall. To avoid
+ * conflicts with existing diagnoses for LPAR and z/VM, we do not use
+ * the instruction encoded number, but specify the number in R1 and
+ * use 0x500 as KVM hypercall
+ *
+ * Copyright IBM Corp. 2007,2008
+ * Author(s): Christian Borntraeger <borntraeger@de.ibm.com>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.
+ */
+
+static inline long kvm_hypercall0(unsigned long nr)
+{
+	register unsigned long __nr asm("1") = nr;
+	register long __rc asm("2");
+
+	asm volatile ("diag 2,4,0x500\n"
+		      : "=d" (__rc) : "d" (__nr): "memory", "cc");
+	return __rc;
+}
+
+static inline long kvm_hypercall1(unsigned long nr, unsigned long p1)
+{
+	register unsigned long __nr asm("1") = nr;
+	register unsigned long __p1 asm("2") = p1;
+	register long __rc asm("2");
+
+	asm volatile ("diag 2,4,0x500\n"
+		      : "=d" (__rc) : "d" (__nr), "0" (__p1) : "memory", "cc");
+	return __rc;
+}
+
+static inline long kvm_hypercall2(unsigned long nr, unsigned long p1,
+			       unsigned long p2)
+{
+	register unsigned long __nr asm("1") = nr;
+	register unsigned long __p1 asm("2") = p1;
+	register unsigned long __p2 asm("3") = p2;
+	register long __rc asm("2");
+
+	asm volatile ("diag 2,4,0x500\n"
+		      : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2)
+		      : "memory", "cc");
+	return __rc;
+}
+
+static inline long kvm_hypercall3(unsigned long nr, unsigned long p1,
+			       unsigned long p2, unsigned long p3)
+{
+	register unsigned long __nr asm("1") = nr;
+	register unsigned long __p1 asm("2") = p1;
+	register unsigned long __p2 asm("3") = p2;
+	register unsigned long __p3 asm("4") = p3;
+	register long __rc asm("2");
+
+	asm volatile ("diag 2,4,0x500\n"
+		      : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2),
+			"d" (__p3) : "memory", "cc");
+	return __rc;
+}
+
+
+static inline long kvm_hypercall4(unsigned long nr, unsigned long p1,
+			       unsigned long p2, unsigned long p3,
+			       unsigned long p4)
+{
+	register unsigned long __nr asm("1") = nr;
+	register unsigned long __p1 asm("2") = p1;
+	register unsigned long __p2 asm("3") = p2;
+	register unsigned long __p3 asm("4") = p3;
+	register unsigned long __p4 asm("5") = p4;
+	register long __rc asm("2");
+
+	asm volatile ("diag 2,4,0x500\n"
+		      : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2),
+			"d" (__p3), "d" (__p4) : "memory", "cc");
+	return __rc;
+}
+
+static inline long kvm_hypercall5(unsigned long nr, unsigned long p1,
+			       unsigned long p2, unsigned long p3,
+			       unsigned long p4, unsigned long p5)
+{
+	register unsigned long __nr asm("1") = nr;
+	register unsigned long __p1 asm("2") = p1;
+	register unsigned long __p2 asm("3") = p2;
+	register unsigned long __p3 asm("4") = p3;
+	register unsigned long __p4 asm("5") = p4;
+	register unsigned long __p5 asm("6") = p5;
+	register long __rc asm("2");
+
+	asm volatile ("diag 2,4,0x500\n"
+		      : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2),
+			"d" (__p3), "d" (__p4), "d" (__p5)  : "memory", "cc");
+	return __rc;
+}
+
+static inline long kvm_hypercall6(unsigned long nr, unsigned long p1,
+			       unsigned long p2, unsigned long p3,
+			       unsigned long p4, unsigned long p5,
+			       unsigned long p6)
+{
+	register unsigned long __nr asm("1") = nr;
+	register unsigned long __p1 asm("2") = p1;
+	register unsigned long __p2 asm("3") = p2;
+	register unsigned long __p3 asm("4") = p3;
+	register unsigned long __p4 asm("5") = p4;
+	register unsigned long __p5 asm("6") = p5;
+	register unsigned long __p6 asm("7") = p6;
+	register long __rc asm("2");
+
+	asm volatile ("diag 2,4,0x500\n"
+		      : "=d" (__rc) : "d" (__nr), "0" (__p1), "d" (__p2),
+			"d" (__p3), "d" (__p4), "d" (__p5), "d" (__p6)
+		      : "memory", "cc");
+	return __rc;
+}
+
+/* kvm on s390 is always paravirtualization enabled */
+static inline int kvm_para_available(void)
+{
+	return 1;
+}
+
+/* No feature bits are currently assigned for kvm on s390 */
+static inline unsigned int kvm_arch_para_features(void)
+{
+	return 0;
+}
+
+#endif /* __S390_KVM_PARA_H */
diff --git a/arch/s390/include/asm/kvm_virtio.h b/arch/s390/include/asm/kvm_virtio.h
new file mode 100644
index 000000000000..146100224def
--- /dev/null
+++ b/arch/s390/include/asm/kvm_virtio.h
@@ -0,0 +1,63 @@
+/*
+ * kvm_virtio.h - definition for virtio for kvm on s390
+ *
+ * Copyright IBM Corp. 2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ *    Author(s): Christian Borntraeger <borntraeger@de.ibm.com>
+ */
+
+#ifndef __KVM_S390_VIRTIO_H
+#define __KVM_S390_VIRTIO_H
+
+#include <linux/types.h>
+
+struct kvm_device_desc {
+	/* The device type: console, network, disk etc.  Type 0 terminates. */
+	__u8 type;
+	/* The number of virtqueues (first in config array) */
+	__u8 num_vq;
+	/*
+	 * The number of bytes of feature bits.  Multiply by 2: one for host
+	 * features and one for guest acknowledgements.
+	 */
+	__u8 feature_len;
+	/* The number of bytes of the config array after virtqueues. */
+	__u8 config_len;
+	/* A status byte, written by the Guest. */
+	__u8 status;
+	__u8 config[0];
+};
+
+/*
+ * This is how we expect the device configuration field for a virtqueue
+ * to be laid out in config space.
+ */
+struct kvm_vqconfig {
+	/* The token returned with an interrupt. Set by the guest */
+	__u64 token;
+	/* The address of the virtio ring */
+	__u64 address;
+	/* The number of entries in the virtio_ring */
+	__u16 num;
+
+};
+
+#define KVM_S390_VIRTIO_NOTIFY		0
+#define KVM_S390_VIRTIO_RESET		1
+#define KVM_S390_VIRTIO_SET_STATUS	2
+
+#ifdef __KERNEL__
+/* early virtio console setup */
+#ifdef CONFIG_VIRTIO_CONSOLE
+extern void s390_virtio_console_init(void);
+#else
+static inline void s390_virtio_console_init(void)
+{
+}
+#endif /* CONFIG_VIRTIO_CONSOLE */
+#endif /* __KERNEL__ */
+#endif
diff --git a/arch/s390/include/asm/linkage.h b/arch/s390/include/asm/linkage.h
new file mode 100644
index 000000000000..291c2d01c44f
--- /dev/null
+++ b/arch/s390/include/asm/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/arch/s390/include/asm/local.h b/arch/s390/include/asm/local.h
new file mode 100644
index 000000000000..c11c530f74d0
--- /dev/null
+++ b/arch/s390/include/asm/local.h
@@ -0,0 +1 @@
+#include <asm-generic/local.h>
diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h
new file mode 100644
index 000000000000..0bc51d52a899
--- /dev/null
+++ b/arch/s390/include/asm/lowcore.h
@@ -0,0 +1,433 @@
+/*
+ *  include/asm-s390/lowcore.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *               Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
+ */
+
+#ifndef _ASM_S390_LOWCORE_H
+#define _ASM_S390_LOWCORE_H
+
+#ifndef __s390x__
+#define __LC_EXT_OLD_PSW                0x018
+#define __LC_SVC_OLD_PSW                0x020
+#define __LC_PGM_OLD_PSW                0x028
+#define __LC_MCK_OLD_PSW                0x030
+#define __LC_IO_OLD_PSW                 0x038
+#define __LC_EXT_NEW_PSW                0x058
+#define __LC_SVC_NEW_PSW                0x060
+#define __LC_PGM_NEW_PSW                0x068
+#define __LC_MCK_NEW_PSW                0x070
+#define __LC_IO_NEW_PSW                 0x078
+#else /* !__s390x__ */
+#define __LC_EXT_OLD_PSW                0x0130
+#define __LC_SVC_OLD_PSW                0x0140
+#define __LC_PGM_OLD_PSW                0x0150
+#define __LC_MCK_OLD_PSW                0x0160
+#define __LC_IO_OLD_PSW                 0x0170
+#define __LC_EXT_NEW_PSW                0x01b0
+#define __LC_SVC_NEW_PSW                0x01c0
+#define __LC_PGM_NEW_PSW                0x01d0
+#define __LC_MCK_NEW_PSW                0x01e0
+#define __LC_IO_NEW_PSW                 0x01f0
+#endif /* !__s390x__ */
+
+#define __LC_IPL_PARMBLOCK_PTR		0x014
+#define __LC_EXT_PARAMS                 0x080
+#define __LC_CPU_ADDRESS                0x084
+#define __LC_EXT_INT_CODE               0x086
+
+#define __LC_SVC_ILC                    0x088
+#define __LC_SVC_INT_CODE               0x08A
+#define __LC_PGM_ILC                    0x08C
+#define __LC_PGM_INT_CODE               0x08E
+
+#define __LC_PER_ATMID			0x096
+#define __LC_PER_ADDRESS		0x098
+#define __LC_PER_ACCESS_ID		0x0A1
+#define __LC_AR_MODE_ID			0x0A3
+
+#define __LC_SUBCHANNEL_ID              0x0B8
+#define __LC_SUBCHANNEL_NR              0x0BA
+#define __LC_IO_INT_PARM                0x0BC
+#define __LC_IO_INT_WORD                0x0C0
+#define __LC_MCCK_CODE                  0x0E8
+
+#define __LC_LAST_BREAK 		0x110
+
+#define __LC_RETURN_PSW                 0x200
+
+#define __LC_SAVE_AREA                  0xC00
+
+#ifndef __s390x__
+#define __LC_IRB			0x208
+#define __LC_SYNC_ENTER_TIMER		0x248
+#define __LC_ASYNC_ENTER_TIMER		0x250
+#define __LC_EXIT_TIMER			0x258
+#define __LC_LAST_UPDATE_TIMER		0x260
+#define __LC_USER_TIMER			0x268
+#define __LC_SYSTEM_TIMER		0x270
+#define __LC_LAST_UPDATE_CLOCK		0x278
+#define __LC_STEAL_CLOCK		0x280
+#define __LC_RETURN_MCCK_PSW            0x288
+#define __LC_KERNEL_STACK               0xC40
+#define __LC_THREAD_INFO		0xC44
+#define __LC_ASYNC_STACK                0xC48
+#define __LC_KERNEL_ASCE		0xC4C
+#define __LC_USER_ASCE			0xC50
+#define __LC_PANIC_STACK                0xC54
+#define __LC_CPUID                      0xC60
+#define __LC_CPUADDR                    0xC68
+#define __LC_IPLDEV                     0xC7C
+#define __LC_CURRENT			0xC90
+#define __LC_INT_CLOCK			0xC98
+#else /* __s390x__ */
+#define __LC_IRB			0x210
+#define __LC_SYNC_ENTER_TIMER		0x250
+#define __LC_ASYNC_ENTER_TIMER		0x258
+#define __LC_EXIT_TIMER			0x260
+#define __LC_LAST_UPDATE_TIMER		0x268
+#define __LC_USER_TIMER			0x270
+#define __LC_SYSTEM_TIMER		0x278
+#define __LC_LAST_UPDATE_CLOCK		0x280
+#define __LC_STEAL_CLOCK		0x288
+#define __LC_RETURN_MCCK_PSW            0x290
+#define __LC_KERNEL_STACK               0xD40
+#define __LC_THREAD_INFO		0xD48
+#define __LC_ASYNC_STACK                0xD50
+#define __LC_KERNEL_ASCE		0xD58
+#define __LC_USER_ASCE			0xD60
+#define __LC_PANIC_STACK                0xD68
+#define __LC_CPUID			0xD80
+#define __LC_CPUADDR			0xD88
+#define __LC_IPLDEV                     0xDB8
+#define __LC_CURRENT			0xDD8
+#define __LC_INT_CLOCK			0xDE8
+#endif /* __s390x__ */
+
+
+#define __LC_PANIC_MAGIC		0xE00
+#ifndef __s390x__
+#define __LC_PFAULT_INTPARM             0x080
+#define __LC_CPU_TIMER_SAVE_AREA        0x0D8
+#define __LC_CLOCK_COMP_SAVE_AREA	0x0E0
+#define __LC_PSW_SAVE_AREA		0x100
+#define __LC_PREFIX_SAVE_AREA		0x108
+#define __LC_AREGS_SAVE_AREA            0x120
+#define __LC_FPREGS_SAVE_AREA		0x160
+#define __LC_GPREGS_SAVE_AREA           0x180
+#define __LC_CREGS_SAVE_AREA            0x1C0
+#else /* __s390x__ */
+#define __LC_PFAULT_INTPARM             0x11B8
+#define __LC_FPREGS_SAVE_AREA		0x1200
+#define __LC_GPREGS_SAVE_AREA           0x1280
+#define __LC_PSW_SAVE_AREA		0x1300
+#define __LC_PREFIX_SAVE_AREA		0x1318
+#define __LC_FP_CREG_SAVE_AREA		0x131C
+#define __LC_TODREG_SAVE_AREA		0x1324
+#define __LC_CPU_TIMER_SAVE_AREA        0x1328
+#define __LC_CLOCK_COMP_SAVE_AREA	0x1331
+#define __LC_AREGS_SAVE_AREA            0x1340
+#define __LC_CREGS_SAVE_AREA            0x1380
+#endif /* __s390x__ */
+
+#ifndef __ASSEMBLY__
+
+#include <asm/processor.h>
+#include <linux/types.h>
+#include <asm/sigp.h>
+
+void restart_int_handler(void);
+void ext_int_handler(void);
+void system_call(void);
+void pgm_check_handler(void);
+void mcck_int_handler(void);
+void io_int_handler(void);
+
+struct save_area_s390 {
+	u32	ext_save;
+	u64	timer;
+	u64	clk_cmp;
+	u8	pad1[24];
+	u8	psw[8];
+	u32	pref_reg;
+	u8	pad2[20];
+	u32	acc_regs[16];
+	u64	fp_regs[4];
+	u32	gp_regs[16];
+	u32	ctrl_regs[16];
+}  __attribute__((packed));
+
+struct save_area_s390x {
+	u64	fp_regs[16];
+	u64	gp_regs[16];
+	u8	psw[16];
+	u8	pad1[8];
+	u32	pref_reg;
+	u32	fp_ctrl_reg;
+	u8	pad2[4];
+	u32	tod_reg;
+	u64	timer;
+	u64	clk_cmp;
+	u8	pad3[8];
+	u32	acc_regs[16];
+	u64	ctrl_regs[16];
+}  __attribute__((packed));
+
+union save_area {
+	struct save_area_s390	s390;
+	struct save_area_s390x	s390x;
+};
+
+#define SAVE_AREA_BASE_S390	0xd4
+#define SAVE_AREA_BASE_S390X	0x1200
+
+#ifndef __s390x__
+#define SAVE_AREA_SIZE sizeof(struct save_area_s390)
+#define SAVE_AREA_BASE SAVE_AREA_BASE_S390
+#else
+#define SAVE_AREA_SIZE sizeof(struct save_area_s390x)
+#define SAVE_AREA_BASE SAVE_AREA_BASE_S390X
+#endif
+
+struct _lowcore
+{
+#ifndef __s390x__
+        /* prefix area: defined by architecture */
+	psw_t        restart_psw;              /* 0x000 */
+	__u32        ccw2[4];                  /* 0x008 */
+	psw_t        external_old_psw;         /* 0x018 */
+	psw_t        svc_old_psw;              /* 0x020 */
+	psw_t        program_old_psw;          /* 0x028 */
+	psw_t        mcck_old_psw;             /* 0x030 */
+	psw_t        io_old_psw;               /* 0x038 */
+	__u8         pad1[0x58-0x40];          /* 0x040 */
+	psw_t        external_new_psw;         /* 0x058 */
+	psw_t        svc_new_psw;              /* 0x060 */
+	psw_t        program_new_psw;          /* 0x068 */
+	psw_t        mcck_new_psw;             /* 0x070 */
+	psw_t        io_new_psw;               /* 0x078 */
+	__u32        ext_params;               /* 0x080 */
+	__u16        cpu_addr;                 /* 0x084 */
+	__u16        ext_int_code;             /* 0x086 */
+        __u16        svc_ilc;                  /* 0x088 */
+        __u16        svc_code;                 /* 0x08a */
+        __u16        pgm_ilc;                  /* 0x08c */
+        __u16        pgm_code;                 /* 0x08e */
+	__u32        trans_exc_code;           /* 0x090 */
+	__u16        mon_class_num;            /* 0x094 */
+	__u16        per_perc_atmid;           /* 0x096 */
+	__u32        per_address;              /* 0x098 */
+	__u32        monitor_code;             /* 0x09c */
+	__u8         exc_access_id;            /* 0x0a0 */
+	__u8         per_access_id;            /* 0x0a1 */
+	__u8         pad2[0xB8-0xA2];          /* 0x0a2 */
+	__u16        subchannel_id;            /* 0x0b8 */
+	__u16        subchannel_nr;            /* 0x0ba */
+	__u32        io_int_parm;              /* 0x0bc */
+	__u32        io_int_word;              /* 0x0c0 */
+	__u8	     pad3[0xc8-0xc4];	       /* 0x0c4 */
+	__u32	     stfl_fac_list;	       /* 0x0c8 */
+	__u8	     pad4[0xd4-0xcc];	       /* 0x0cc */
+	__u32        extended_save_area_addr;  /* 0x0d4 */
+	__u32        cpu_timer_save_area[2];   /* 0x0d8 */
+	__u32        clock_comp_save_area[2];  /* 0x0e0 */
+	__u32        mcck_interruption_code[2]; /* 0x0e8 */
+	__u8	     pad5[0xf4-0xf0];	       /* 0x0f0 */
+	__u32        external_damage_code;     /* 0x0f4 */
+	__u32        failing_storage_address;  /* 0x0f8 */
+	__u8	     pad6[0x100-0xfc];	       /* 0x0fc */
+	__u32        st_status_fixed_logout[4];/* 0x100 */
+	__u8	     pad7[0x120-0x110];        /* 0x110 */
+	__u32        access_regs_save_area[16];/* 0x120 */
+	__u32        floating_pt_save_area[8]; /* 0x160 */
+	__u32        gpregs_save_area[16];     /* 0x180 */
+	__u32        cregs_save_area[16];      /* 0x1c0 */	
+
+        psw_t        return_psw;               /* 0x200 */
+	__u8	     irb[64];		       /* 0x208 */
+	__u64        sync_enter_timer;         /* 0x248 */
+	__u64        async_enter_timer;        /* 0x250 */
+	__u64        exit_timer;               /* 0x258 */
+	__u64        last_update_timer;        /* 0x260 */
+	__u64        user_timer;               /* 0x268 */
+	__u64        system_timer;             /* 0x270 */
+	__u64        last_update_clock;        /* 0x278 */
+	__u64        steal_clock;              /* 0x280 */
+        psw_t        return_mcck_psw;          /* 0x288 */
+	__u8         pad8[0xc00-0x290];        /* 0x290 */
+
+        /* System info area */
+	__u32        save_area[16];            /* 0xc00 */
+	__u32        kernel_stack;             /* 0xc40 */
+	__u32        thread_info;              /* 0xc44 */
+	__u32        async_stack;              /* 0xc48 */
+	__u32        kernel_asce;              /* 0xc4c */
+	__u32        user_asce;                /* 0xc50 */
+	__u32        panic_stack;              /* 0xc54 */
+	__u32	     user_exec_asce;	       /* 0xc58 */
+	__u8	     pad10[0xc60-0xc5c];       /* 0xc5c */
+	/* entry.S sensitive area start */
+	struct       cpuinfo_S390 cpu_data;    /* 0xc60 */
+	__u32        ipl_device;               /* 0xc7c */
+	/* entry.S sensitive area end */
+
+        /* SMP info area: defined by DJB */
+	__u64	     clock_comparator;	       /* 0xc80 */
+	__u32        ext_call_fast;            /* 0xc88 */
+	__u32        percpu_offset;            /* 0xc8c */
+	__u32        current_task;	       /* 0xc90 */
+	__u32        softirq_pending;	       /* 0xc94 */
+	__u64        int_clock;                /* 0xc98 */
+        __u8         pad11[0xe00-0xca0];       /* 0xca0 */
+
+        /* 0xe00 is used as indicator for dump tools */
+        /* whether the kernel died with panic() or not */
+        __u32        panic_magic;              /* 0xe00 */
+
+        /* Align to the top 1k of prefix area */
+	__u8         pad12[0x1000-0xe04];      /* 0xe04 */
+#else /* !__s390x__ */
+        /* prefix area: defined by architecture */
+	__u32        ccw1[2];                  /* 0x000 */
+	__u32        ccw2[4];                  /* 0x008 */
+	__u8         pad1[0x80-0x18];          /* 0x018 */
+	__u32        ext_params;               /* 0x080 */
+	__u16        cpu_addr;                 /* 0x084 */
+	__u16        ext_int_code;             /* 0x086 */
+        __u16        svc_ilc;                  /* 0x088 */
+        __u16        svc_code;                 /* 0x08a */
+        __u16        pgm_ilc;                  /* 0x08c */
+        __u16        pgm_code;                 /* 0x08e */
+	__u32        data_exc_code;            /* 0x090 */
+	__u16        mon_class_num;            /* 0x094 */
+	__u16        per_perc_atmid;           /* 0x096 */
+	addr_t       per_address;              /* 0x098 */
+	__u8         exc_access_id;            /* 0x0a0 */
+	__u8         per_access_id;            /* 0x0a1 */
+	__u8         op_access_id;             /* 0x0a2 */
+	__u8         ar_access_id;             /* 0x0a3 */
+	__u8         pad2[0xA8-0xA4];          /* 0x0a4 */
+	addr_t       trans_exc_code;           /* 0x0A0 */
+	addr_t       monitor_code;             /* 0x09c */
+	__u16        subchannel_id;            /* 0x0b8 */
+	__u16        subchannel_nr;            /* 0x0ba */
+	__u32        io_int_parm;              /* 0x0bc */
+	__u32        io_int_word;              /* 0x0c0 */
+	__u8         pad3[0xc8-0xc4];          /* 0x0c4 */
+	__u32        stfl_fac_list;            /* 0x0c8 */
+	__u8         pad4[0xe8-0xcc];          /* 0x0cc */
+	__u32        mcck_interruption_code[2]; /* 0x0e8 */
+	__u8         pad5[0xf4-0xf0];          /* 0x0f0 */
+	__u32        external_damage_code;     /* 0x0f4 */
+	addr_t       failing_storage_address;  /* 0x0f8 */
+	__u8         pad6[0x120-0x100];        /* 0x100 */
+	psw_t        restart_old_psw;          /* 0x120 */
+	psw_t        external_old_psw;         /* 0x130 */
+	psw_t        svc_old_psw;              /* 0x140 */
+	psw_t        program_old_psw;          /* 0x150 */
+	psw_t        mcck_old_psw;             /* 0x160 */
+	psw_t        io_old_psw;               /* 0x170 */
+	__u8         pad7[0x1a0-0x180];        /* 0x180 */
+	psw_t        restart_psw;              /* 0x1a0 */
+	psw_t        external_new_psw;         /* 0x1b0 */
+	psw_t        svc_new_psw;              /* 0x1c0 */
+	psw_t        program_new_psw;          /* 0x1d0 */
+	psw_t        mcck_new_psw;             /* 0x1e0 */
+	psw_t        io_new_psw;               /* 0x1f0 */
+        psw_t        return_psw;               /* 0x200 */
+	__u8	     irb[64];		       /* 0x210 */
+	__u64        sync_enter_timer;         /* 0x250 */
+	__u64        async_enter_timer;        /* 0x258 */
+	__u64        exit_timer;               /* 0x260 */
+	__u64        last_update_timer;        /* 0x268 */
+	__u64        user_timer;               /* 0x270 */
+	__u64        system_timer;             /* 0x278 */
+	__u64        last_update_clock;        /* 0x280 */
+	__u64        steal_clock;              /* 0x288 */
+        psw_t        return_mcck_psw;          /* 0x290 */
+        __u8         pad8[0xc00-0x2a0];        /* 0x2a0 */
+        /* System info area */
+	__u64        save_area[16];            /* 0xc00 */
+        __u8         pad9[0xd40-0xc80];        /* 0xc80 */
+ 	__u64        kernel_stack;             /* 0xd40 */
+	__u64        thread_info;              /* 0xd48 */
+	__u64        async_stack;              /* 0xd50 */
+	__u64        kernel_asce;              /* 0xd58 */
+	__u64        user_asce;                /* 0xd60 */
+	__u64        panic_stack;              /* 0xd68 */
+	__u64	     user_exec_asce;	       /* 0xd70 */
+	__u8	     pad10[0xd80-0xd78];       /* 0xd78 */
+	/* entry.S sensitive area start */
+	struct       cpuinfo_S390 cpu_data;    /* 0xd80 */
+	__u32        ipl_device;               /* 0xdb8 */
+	__u32        pad11;                    /* 0xdbc */
+	/* entry.S sensitive area end */
+
+        /* SMP info area: defined by DJB */
+	__u64	     clock_comparator;	       /* 0xdc0 */
+	__u64        ext_call_fast;            /* 0xdc8 */
+	__u64        percpu_offset;            /* 0xdd0 */
+	__u64        current_task;	       /* 0xdd8 */
+	__u32	     softirq_pending;	       /* 0xde0 */
+	__u32	     pad_0x0de4;	       /* 0xde4 */
+	__u64        int_clock;                /* 0xde8 */
+        __u8         pad12[0xe00-0xdf0];       /* 0xdf0 */
+
+        /* 0xe00 is used as indicator for dump tools */
+        /* whether the kernel died with panic() or not */
+        __u32        panic_magic;              /* 0xe00 */
+
+	__u8         pad13[0x11b8-0xe04];      /* 0xe04 */
+
+	/* 64 bit extparam used for pfault, diag 250 etc  */
+	__u64        ext_params2;               /* 0x11B8 */
+
+	__u8         pad14[0x1200-0x11C0];      /* 0x11C0 */
+
+        /* System info area */ 
+
+	__u64        floating_pt_save_area[16]; /* 0x1200 */
+	__u64        gpregs_save_area[16];      /* 0x1280 */
+	__u32        st_status_fixed_logout[4]; /* 0x1300 */
+	__u8         pad15[0x1318-0x1310];      /* 0x1310 */
+	__u32        prefixreg_save_area;       /* 0x1318 */
+	__u32        fpt_creg_save_area;        /* 0x131c */
+	__u8         pad16[0x1324-0x1320];      /* 0x1320 */
+	__u32        tod_progreg_save_area;     /* 0x1324 */
+	__u32        cpu_timer_save_area[2];    /* 0x1328 */
+	__u32        clock_comp_save_area[2];   /* 0x1330 */
+	__u8         pad17[0x1340-0x1338];      /* 0x1338 */
+	__u32        access_regs_save_area[16]; /* 0x1340 */ 
+	__u64        cregs_save_area[16];       /* 0x1380 */
+
+	/* align to the top of the prefix area */
+
+	__u8         pad18[0x2000-0x1400];      /* 0x1400 */
+#endif /* !__s390x__ */
+} __attribute__((packed)); /* End structure*/
+
+#define S390_lowcore (*((struct _lowcore *) 0))
+extern struct _lowcore *lowcore_ptr[];
+
+static inline void set_prefix(__u32 address)
+{
+	asm volatile("spx %0" : : "m" (address) : "memory");
+}
+
+static inline __u32 store_prefix(void)
+{
+	__u32 address;
+
+	asm volatile("stpx %0" : "=m" (address));
+	return address;
+}
+
+#define __PANIC_MAGIC           0xDEADC0DE
+
+#endif
+
+#endif
diff --git a/arch/s390/include/asm/mathemu.h b/arch/s390/include/asm/mathemu.h
new file mode 100644
index 000000000000..e8dd1ba8edb0
--- /dev/null
+++ b/arch/s390/include/asm/mathemu.h
@@ -0,0 +1,29 @@
+/*
+ *  arch/s390/kernel/mathemu.h
+ *    IEEE floating point emulation.
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ */
+
+#ifndef __MATHEMU__
+#define __MATHEMU__
+
+extern int math_emu_b3(__u8 *, struct pt_regs *);
+extern int math_emu_ed(__u8 *, struct pt_regs *);
+extern int math_emu_ldr(__u8 *);
+extern int math_emu_ler(__u8 *);
+extern int math_emu_std(__u8 *, struct pt_regs *);
+extern int math_emu_ld(__u8 *, struct pt_regs *);
+extern int math_emu_ste(__u8 *, struct pt_regs *);
+extern int math_emu_le(__u8 *, struct pt_regs *);
+extern int math_emu_lfpc(__u8 *, struct pt_regs *);
+extern int math_emu_stfpc(__u8 *, struct pt_regs *);
+extern int math_emu_srnm(__u8 *, struct pt_regs *);
+
+#endif                                 /* __MATHEMU__                      */
+
+
+
+
diff --git a/arch/s390/include/asm/mman.h b/arch/s390/include/asm/mman.h
new file mode 100644
index 000000000000..7839767d837e
--- /dev/null
+++ b/arch/s390/include/asm/mman.h
@@ -0,0 +1,25 @@
+/*
+ *  include/asm-s390/mman.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/mman.h"
+ */
+
+#ifndef __S390_MMAN_H__
+#define __S390_MMAN_H__
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#endif /* __S390_MMAN_H__ */
diff --git a/arch/s390/include/asm/mmu.h b/arch/s390/include/asm/mmu.h
new file mode 100644
index 000000000000..5dd5e7b3476f
--- /dev/null
+++ b/arch/s390/include/asm/mmu.h
@@ -0,0 +1,13 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+typedef struct {
+	struct list_head crst_list;
+	struct list_head pgtable_list;
+	unsigned long asce_bits;
+	unsigned long asce_limit;
+	int noexec;
+	int pgstes;
+} mm_context_t;
+
+#endif
diff --git a/arch/s390/include/asm/mmu_context.h b/arch/s390/include/asm/mmu_context.h
new file mode 100644
index 000000000000..4c2fbf48c9c4
--- /dev/null
+++ b/arch/s390/include/asm/mmu_context.h
@@ -0,0 +1,77 @@
+/*
+ *  include/asm-s390/mmu_context.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/mmu_context.h"
+ */
+
+#ifndef __S390_MMU_CONTEXT_H
+#define __S390_MMU_CONTEXT_H
+
+#include <asm/pgalloc.h>
+#include <asm/uaccess.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline int init_new_context(struct task_struct *tsk,
+				   struct mm_struct *mm)
+{
+	mm->context.asce_bits = _ASCE_TABLE_LENGTH | _ASCE_USER_BITS;
+#ifdef CONFIG_64BIT
+	mm->context.asce_bits |= _ASCE_TYPE_REGION3;
+#endif
+	if (current->mm->context.pgstes) {
+		mm->context.noexec = 0;
+		mm->context.pgstes = 1;
+	} else {
+		mm->context.noexec = s390_noexec;
+		mm->context.pgstes = 0;
+	}
+	mm->context.asce_limit = STACK_TOP_MAX;
+	crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm));
+	return 0;
+}
+
+#define destroy_context(mm)             do { } while (0)
+
+#ifndef __s390x__
+#define LCTL_OPCODE "lctl"
+#else
+#define LCTL_OPCODE "lctlg"
+#endif
+
+static inline void update_mm(struct mm_struct *mm, struct task_struct *tsk)
+{
+	pgd_t *pgd = mm->pgd;
+
+	S390_lowcore.user_asce = mm->context.asce_bits | __pa(pgd);
+	if (switch_amode) {
+		/* Load primary space page table origin. */
+		pgd = mm->context.noexec ? get_shadow_table(pgd) : pgd;
+		S390_lowcore.user_exec_asce = mm->context.asce_bits | __pa(pgd);
+		asm volatile(LCTL_OPCODE" 1,1,%0\n"
+			     : : "m" (S390_lowcore.user_exec_asce) );
+	} else
+		/* Load home space page table origin. */
+		asm volatile(LCTL_OPCODE" 13,13,%0"
+			     : : "m" (S390_lowcore.user_asce) );
+	set_fs(current->thread.mm_segment);
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	cpu_set(smp_processor_id(), next->cpu_vm_mask);
+	update_mm(next, tsk);
+}
+
+#define enter_lazy_tlb(mm,tsk)	do { } while (0)
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev,
+                               struct mm_struct *next)
+{
+        switch_mm(prev, next, current);
+}
+
+#endif /* __S390_MMU_CONTEXT_H */
diff --git a/arch/s390/include/asm/module.h b/arch/s390/include/asm/module.h
new file mode 100644
index 000000000000..1cc1c5af705a
--- /dev/null
+++ b/arch/s390/include/asm/module.h
@@ -0,0 +1,46 @@
+#ifndef _ASM_S390_MODULE_H
+#define _ASM_S390_MODULE_H
+/*
+ * This file contains the s390 architecture specific module code.
+ */
+
+struct mod_arch_syminfo
+{
+	unsigned long got_offset;
+	unsigned long plt_offset;
+	int got_initialized;
+	int plt_initialized;
+};
+
+struct mod_arch_specific
+{
+	/* Starting offset of got in the module core memory. */
+	unsigned long got_offset;
+	/* Starting offset of plt in the module core memory. */
+	unsigned long plt_offset;
+	/* Size of the got. */
+	unsigned long got_size;
+	/* Size of the plt. */
+	unsigned long plt_size;
+	/* Number of symbols in syminfo. */
+	int nsyms;
+	/* Additional symbol information (got and plt offsets). */
+	struct mod_arch_syminfo *syminfo;
+};
+
+#ifdef __s390x__
+#define ElfW(x) Elf64_ ## x
+#define ELFW(x) ELF64_ ## x
+#else
+#define ElfW(x) Elf32_ ## x
+#define ELFW(x) ELF32_ ## x
+#endif
+
+#define Elf_Addr ElfW(Addr)
+#define Elf_Rela ElfW(Rela)
+#define Elf_Shdr ElfW(Shdr)
+#define Elf_Sym ElfW(Sym)
+#define Elf_Ehdr ElfW(Ehdr)
+#define ELF_R_SYM ELFW(R_SYM)
+#define ELF_R_TYPE ELFW(R_TYPE)
+#endif /* _ASM_S390_MODULE_H */
diff --git a/arch/s390/include/asm/monwriter.h b/arch/s390/include/asm/monwriter.h
new file mode 100644
index 000000000000..f0cbf96c52e6
--- /dev/null
+++ b/arch/s390/include/asm/monwriter.h
@@ -0,0 +1,33 @@
+/*
+ * include/asm-s390/monwriter.h
+ *
+ * Copyright (C) IBM Corp. 2006
+ * Character device driver for writing z/VM APPLDATA monitor records
+ * Version 1.0
+ * Author(s): Melissa Howland <melissah@us.ibm.com>
+ *
+ */
+
+#ifndef _ASM_390_MONWRITER_H
+#define _ASM_390_MONWRITER_H
+
+/* mon_function values */
+#define MONWRITE_START_INTERVAL	0x00 /* start interval recording */
+#define MONWRITE_STOP_INTERVAL	0x01 /* stop interval or config recording */
+#define MONWRITE_GEN_EVENT	0x02 /* generate event record */
+#define MONWRITE_START_CONFIG	0x03 /* start configuration recording */
+
+/* the header the app uses in its write() data */
+struct monwrite_hdr {
+	unsigned char mon_function;
+	unsigned short applid;
+	unsigned char record_num;
+	unsigned short version;
+	unsigned short release;
+	unsigned short mod_level;
+	unsigned short datalen;
+	unsigned char hdrlen;
+
+} __attribute__((packed));
+
+#endif /* _ASM_390_MONWRITER_H */
diff --git a/arch/s390/include/asm/msgbuf.h b/arch/s390/include/asm/msgbuf.h
new file mode 100644
index 000000000000..1bbdee927924
--- /dev/null
+++ b/arch/s390/include/asm/msgbuf.h
@@ -0,0 +1,37 @@
+#ifndef _S390_MSGBUF_H
+#define _S390_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for S/390 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+#ifndef __s390x__
+	unsigned long	__unused1;
+#endif /* ! __s390x__ */
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+#ifndef __s390x__
+	unsigned long	__unused2;
+#endif /* ! __s390x__ */
+	__kernel_time_t msg_ctime;	/* last change time */
+#ifndef __s390x__
+	unsigned long	__unused3;
+#endif /* ! __s390x__ */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* _S390_MSGBUF_H */
diff --git a/arch/s390/include/asm/mutex.h b/arch/s390/include/asm/mutex.h
new file mode 100644
index 000000000000..458c1f7fbc18
--- /dev/null
+++ b/arch/s390/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h
new file mode 100644
index 000000000000..991ba939408c
--- /dev/null
+++ b/arch/s390/include/asm/page.h
@@ -0,0 +1,155 @@
+/*
+ *  include/asm-s390/page.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com)
+ */
+
+#ifndef _S390_PAGE_H
+#define _S390_PAGE_H
+
+#include <linux/const.h>
+#include <asm/types.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT      12
+#define PAGE_SIZE	(_AC(1,UL) << PAGE_SHIFT)
+#define PAGE_MASK       (~(PAGE_SIZE-1))
+#define PAGE_DEFAULT_ACC	0
+#define PAGE_DEFAULT_KEY	(PAGE_DEFAULT_ACC << 4)
+
+#define HPAGE_SHIFT	20
+#define HPAGE_SIZE	(1UL << HPAGE_SHIFT)
+#define HPAGE_MASK	(~(HPAGE_SIZE - 1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+
+#define ARCH_HAS_SETCLEAR_HUGE_PTE
+#define ARCH_HAS_HUGE_PTE_TYPE
+#define ARCH_HAS_PREPARE_HUGEPAGE
+#define ARCH_HAS_HUGEPAGE_CLEAR_FLUSH
+
+#include <asm/setup.h>
+#ifndef __ASSEMBLY__
+
+static inline void clear_page(void *page)
+{
+	if (MACHINE_HAS_PFMF) {
+		asm volatile(
+			"	.insn	rre,0xb9af0000,%0,%1"
+			: : "d" (0x10000), "a" (page) : "memory", "cc");
+	} else {
+		register unsigned long reg1 asm ("1") = 0;
+		register void *reg2 asm ("2") = page;
+		register unsigned long reg3 asm ("3") = 4096;
+		asm volatile(
+			"	mvcl	2,0"
+			: "+d" (reg2), "+d" (reg3) : "d" (reg1)
+			: "memory", "cc");
+	}
+}
+
+static inline void copy_page(void *to, void *from)
+{
+	if (MACHINE_HAS_MVPG) {
+		register unsigned long reg0 asm ("0") = 0;
+		asm volatile(
+			"	mvpg	%0,%1"
+			: : "a" (to), "a" (from), "d" (reg0)
+			: "memory", "cc");
+	} else
+		asm volatile(
+			"	mvc	0(256,%0),0(%1)\n"
+			"	mvc	256(256,%0),256(%1)\n"
+			"	mvc	512(256,%0),512(%1)\n"
+			"	mvc	768(256,%0),768(%1)\n"
+			"	mvc	1024(256,%0),1024(%1)\n"
+			"	mvc	1280(256,%0),1280(%1)\n"
+			"	mvc	1536(256,%0),1536(%1)\n"
+			"	mvc	1792(256,%0),1792(%1)\n"
+			"	mvc	2048(256,%0),2048(%1)\n"
+			"	mvc	2304(256,%0),2304(%1)\n"
+			"	mvc	2560(256,%0),2560(%1)\n"
+			"	mvc	2816(256,%0),2816(%1)\n"
+			"	mvc	3072(256,%0),3072(%1)\n"
+			"	mvc	3328(256,%0),3328(%1)\n"
+			"	mvc	3584(256,%0),3584(%1)\n"
+			"	mvc	3840(256,%0),3840(%1)\n"
+			: : "a" (to), "a" (from) : "memory");
+}
+
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+
+#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
+	alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pud; } pud_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef pte_t *pgtable_t;
+
+#define pgprot_val(x)	((x).pgprot)
+#define pte_val(x)	((x).pte)
+#define pmd_val(x)	((x).pmd)
+#define pud_val(x)	((x).pud)
+#define pgd_val(x)      ((x).pgd)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgd(x)        ((pgd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+/* default storage key used for all pages */
+extern unsigned int default_storage_key;
+
+static inline void
+page_set_storage_key(unsigned long addr, unsigned int skey)
+{
+	asm volatile("sske %0,%1" : : "d" (skey), "a" (addr));
+}
+
+static inline unsigned int
+page_get_storage_key(unsigned long addr)
+{
+	unsigned int skey;
+
+	asm volatile("iske %0,%1" : "=d" (skey) : "a" (addr), "0" (0));
+	return skey;
+}
+
+#ifdef CONFIG_PAGE_STATES
+
+struct page;
+void arch_free_page(struct page *page, int order);
+void arch_alloc_page(struct page *page, int order);
+
+#define HAVE_ARCH_FREE_PAGE
+#define HAVE_ARCH_ALLOC_PAGE
+
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#define __PAGE_OFFSET           0x0UL
+#define PAGE_OFFSET             0x0UL
+#define __pa(x)                 (unsigned long)(x)
+#define __va(x)                 (void *)(unsigned long)(x)
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif /* _S390_PAGE_H */
diff --git a/arch/s390/include/asm/param.h b/arch/s390/include/asm/param.h
new file mode 100644
index 000000000000..34aaa4603347
--- /dev/null
+++ b/arch/s390/include/asm/param.h
@@ -0,0 +1,30 @@
+/*
+ *  include/asm-s390/param.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/param.h"
+ */
+
+#ifndef _ASMS390_PARAM_H
+#define _ASMS390_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
+# define USER_HZ	100		/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif
diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h
new file mode 100644
index 000000000000..42a145c9ddd6
--- /dev/null
+++ b/arch/s390/include/asm/pci.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_S390_PCI_H
+#define __ASM_S390_PCI_H
+
+/* S/390 systems don't have a PCI bus. This file is just here because some stupid .c code
+ * includes it even if CONFIG_PCI is not set.
+ */
+#define PCI_DMA_BUS_IS_PHYS (0)
+
+#endif /* __ASM_S390_PCI_H */
+
diff --git a/arch/s390/include/asm/percpu.h b/arch/s390/include/asm/percpu.h
new file mode 100644
index 000000000000..408d60b4f75b
--- /dev/null
+++ b/arch/s390/include/asm/percpu.h
@@ -0,0 +1,37 @@
+#ifndef __ARCH_S390_PERCPU__
+#define __ARCH_S390_PERCPU__
+
+#include <linux/compiler.h>
+#include <asm/lowcore.h>
+
+/*
+ * s390 uses its own implementation for per cpu data, the offset of
+ * the cpu local data area is cached in the cpu's lowcore memory.
+ * For 64 bit module code s390 forces the use of a GOT slot for the
+ * address of the per cpu variable. This is needed because the module
+ * may be more than 4G above the per cpu area.
+ */
+#if defined(__s390x__) && defined(MODULE)
+
+#define SHIFT_PERCPU_PTR(ptr,offset) (({			\
+	extern int simple_identifier_##var(void);	\
+	unsigned long *__ptr;				\
+	asm ( "larl %0, %1@GOTENT"		\
+	    : "=a" (__ptr) : "X" (ptr) );		\
+	(typeof(ptr))((*__ptr) + (offset));	}))
+
+#else
+
+#define SHIFT_PERCPU_PTR(ptr, offset) (({				\
+	extern int simple_identifier_##var(void);		\
+	unsigned long __ptr;					\
+	asm ( "" : "=a" (__ptr) : "0" (ptr) );			\
+	(typeof(ptr)) (__ptr + (offset)); }))
+
+#endif
+
+#define __my_cpu_offset S390_lowcore.percpu_offset
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_S390_PERCPU__ */
diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
new file mode 100644
index 000000000000..f5b2bf3d7c1d
--- /dev/null
+++ b/arch/s390/include/asm/pgalloc.h
@@ -0,0 +1,174 @@
+/*
+ *  include/asm-s390/pgalloc.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com)
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/pgalloc.h"
+ *    Copyright (C) 1994  Linus Torvalds
+ */
+
+#ifndef _S390_PGALLOC_H
+#define _S390_PGALLOC_H
+
+#include <linux/threads.h>
+#include <linux/gfp.h>
+#include <linux/mm.h>
+
+#define check_pgt_cache()	do {} while (0)
+
+unsigned long *crst_table_alloc(struct mm_struct *, int);
+void crst_table_free(struct mm_struct *, unsigned long *);
+
+unsigned long *page_table_alloc(struct mm_struct *);
+void page_table_free(struct mm_struct *, unsigned long *);
+void disable_noexec(struct mm_struct *, struct task_struct *);
+
+static inline void clear_table(unsigned long *s, unsigned long val, size_t n)
+{
+	*s = val;
+	n = (n / 256) - 1;
+	asm volatile(
+#ifdef CONFIG_64BIT
+		"	mvc	8(248,%0),0(%0)\n"
+#else
+		"	mvc	4(252,%0),0(%0)\n"
+#endif
+		"0:	mvc	256(256,%0),0(%0)\n"
+		"	la	%0,256(%0)\n"
+		"	brct	%1,0b\n"
+		: "+a" (s), "+d" (n));
+}
+
+static inline void crst_table_init(unsigned long *crst, unsigned long entry)
+{
+	clear_table(crst, entry, sizeof(unsigned long)*2048);
+	crst = get_shadow_table(crst);
+	if (crst)
+		clear_table(crst, entry, sizeof(unsigned long)*2048);
+}
+
+#ifndef __s390x__
+
+static inline unsigned long pgd_entry_type(struct mm_struct *mm)
+{
+	return _SEGMENT_ENTRY_EMPTY;
+}
+
+#define pud_alloc_one(mm,address)		({ BUG(); ((pud_t *)2); })
+#define pud_free(mm, x)				do { } while (0)
+
+#define pmd_alloc_one(mm,address)		({ BUG(); ((pmd_t *)2); })
+#define pmd_free(mm, x)				do { } while (0)
+
+#define pgd_populate(mm, pgd, pud)		BUG()
+#define pgd_populate_kernel(mm, pgd, pud)	BUG()
+
+#define pud_populate(mm, pud, pmd)		BUG()
+#define pud_populate_kernel(mm, pud, pmd)	BUG()
+
+#else /* __s390x__ */
+
+static inline unsigned long pgd_entry_type(struct mm_struct *mm)
+{
+	if (mm->context.asce_limit <= (1UL << 31))
+		return _SEGMENT_ENTRY_EMPTY;
+	if (mm->context.asce_limit <= (1UL << 42))
+		return _REGION3_ENTRY_EMPTY;
+	return _REGION2_ENTRY_EMPTY;
+}
+
+int crst_table_upgrade(struct mm_struct *, unsigned long limit);
+void crst_table_downgrade(struct mm_struct *, unsigned long limit);
+
+static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+	unsigned long *table = crst_table_alloc(mm, mm->context.noexec);
+	if (table)
+		crst_table_init(table, _REGION3_ENTRY_EMPTY);
+	return (pud_t *) table;
+}
+#define pud_free(mm, pud) crst_table_free(mm, (unsigned long *) pud)
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr)
+{
+	unsigned long *table = crst_table_alloc(mm, mm->context.noexec);
+	if (table)
+		crst_table_init(table, _SEGMENT_ENTRY_EMPTY);
+	return (pmd_t *) table;
+}
+#define pmd_free(mm, pmd) crst_table_free(mm, (unsigned long *) pmd)
+
+static inline void pgd_populate_kernel(struct mm_struct *mm,
+				       pgd_t *pgd, pud_t *pud)
+{
+	pgd_val(*pgd) = _REGION2_ENTRY | __pa(pud);
+}
+
+static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pud_t *pud)
+{
+	pgd_populate_kernel(mm, pgd, pud);
+	if (mm->context.noexec) {
+		pgd = get_shadow_table(pgd);
+		pud = get_shadow_table(pud);
+		pgd_populate_kernel(mm, pgd, pud);
+	}
+}
+
+static inline void pud_populate_kernel(struct mm_struct *mm,
+				       pud_t *pud, pmd_t *pmd)
+{
+	pud_val(*pud) = _REGION3_ENTRY | __pa(pmd);
+}
+
+static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
+{
+	pud_populate_kernel(mm, pud, pmd);
+	if (mm->context.noexec) {
+		pud = get_shadow_table(pud);
+		pmd = get_shadow_table(pmd);
+		pud_populate_kernel(mm, pud, pmd);
+	}
+}
+
+#endif /* __s390x__ */
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	INIT_LIST_HEAD(&mm->context.crst_list);
+	INIT_LIST_HEAD(&mm->context.pgtable_list);
+	return (pgd_t *) crst_table_alloc(mm, s390_noexec);
+}
+#define pgd_free(mm, pgd) crst_table_free(mm, (unsigned long *) pgd)
+
+static inline void pmd_populate_kernel(struct mm_struct *mm,
+				       pmd_t *pmd, pte_t *pte)
+{
+	pmd_val(*pmd) = _SEGMENT_ENTRY + __pa(pte);
+}
+
+static inline void pmd_populate(struct mm_struct *mm,
+				pmd_t *pmd, pgtable_t pte)
+{
+	pmd_populate_kernel(mm, pmd, pte);
+	if (mm->context.noexec) {
+		pmd = get_shadow_table(pmd);
+		pmd_populate_kernel(mm, pmd, pte + PTRS_PER_PTE);
+	}
+}
+
+#define pmd_pgtable(pmd) \
+	(pgtable_t)(pmd_val(pmd) & -sizeof(pte_t)*PTRS_PER_PTE)
+
+/*
+ * page table entry allocation/free routines.
+ */
+#define pte_alloc_one_kernel(mm, vmaddr) ((pte_t *) page_table_alloc(mm))
+#define pte_alloc_one(mm, vmaddr) ((pte_t *) page_table_alloc(mm))
+
+#define pte_free_kernel(mm, pte) page_table_free(mm, (unsigned long *) pte)
+#define pte_free(mm, pte) page_table_free(mm, (unsigned long *) pte)
+
+#endif /* _S390_PGALLOC_H */
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
new file mode 100644
index 000000000000..0bdb704ae051
--- /dev/null
+++ b/arch/s390/include/asm/pgtable.h
@@ -0,0 +1,1093 @@
+/*
+ *  include/asm-s390/pgtable.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com)
+ *               Ulrich Weigand (weigand@de.ibm.com)
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/pgtable.h"
+ */
+
+#ifndef _ASM_S390_PGTABLE_H
+#define _ASM_S390_PGTABLE_H
+
+/*
+ * The Linux memory management assumes a three-level page table setup. For
+ * s390 31 bit we "fold" the mid level into the top-level page table, so
+ * that we physically have the same two-level page table as the s390 mmu
+ * expects in 31 bit mode. For s390 64 bit we use three of the five levels
+ * the hardware provides (region first and region second tables are not
+ * used).
+ *
+ * The "pgd_xxx()" functions are trivial for a folded two-level
+ * setup: the pgd is never bad, and a pmd always exists (as it's folded
+ * into the pgd entry)
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the S390 page table tree.
+ */
+#ifndef __ASSEMBLY__
+#include <linux/sched.h>
+#include <linux/mm_types.h>
+#include <asm/bitops.h>
+#include <asm/bug.h>
+#include <asm/processor.h>
+
+extern pgd_t swapper_pg_dir[] __attribute__ ((aligned (4096)));
+extern void paging_init(void);
+extern void vmem_map_init(void);
+
+/*
+ * The S390 doesn't have any external MMU info: the kernel page
+ * tables contain all the necessary information.
+ */
+#define update_mmu_cache(vma, address, pte)     do { } while (0)
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern char empty_zero_page[PAGE_SIZE];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * PMD_SHIFT determines the size of the area a second-level page
+ * table can map
+ * PGDIR_SHIFT determines what a third-level page table entry can map
+ */
+#ifndef __s390x__
+# define PMD_SHIFT	20
+# define PUD_SHIFT	20
+# define PGDIR_SHIFT	20
+#else /* __s390x__ */
+# define PMD_SHIFT	20
+# define PUD_SHIFT	31
+# define PGDIR_SHIFT	42
+#endif /* __s390x__ */
+
+#define PMD_SIZE        (1UL << PMD_SHIFT)
+#define PMD_MASK        (~(PMD_SIZE-1))
+#define PUD_SIZE	(1UL << PUD_SHIFT)
+#define PUD_MASK	(~(PUD_SIZE-1))
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: the S390 is two-level, so
+ * we don't really have any PMD directory physically.
+ * for S390 segment-table entries are combined to one PGD
+ * that leads to 1024 pte per pgd
+ */
+#define PTRS_PER_PTE	256
+#ifndef __s390x__
+#define PTRS_PER_PMD	1
+#define PTRS_PER_PUD	1
+#else /* __s390x__ */
+#define PTRS_PER_PMD	2048
+#define PTRS_PER_PUD	2048
+#endif /* __s390x__ */
+#define PTRS_PER_PGD	2048
+
+#define FIRST_USER_ADDRESS  0
+
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %p.\n", __FILE__, __LINE__, (void *) pte_val(e))
+#define pmd_ERROR(e) \
+	printk("%s:%d: bad pmd %p.\n", __FILE__, __LINE__, (void *) pmd_val(e))
+#define pud_ERROR(e) \
+	printk("%s:%d: bad pud %p.\n", __FILE__, __LINE__, (void *) pud_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %p.\n", __FILE__, __LINE__, (void *) pgd_val(e))
+
+#ifndef __ASSEMBLY__
+/*
+ * The vmalloc area will always be on the topmost area of the kernel
+ * mapping. We reserve 96MB (31bit) / 1GB (64bit) for vmalloc,
+ * which should be enough for any sane case.
+ * By putting vmalloc at the top, we maximise the gap between physical
+ * memory and vmalloc to catch misplaced memory accesses. As a side
+ * effect, this also makes sure that 64 bit module code cannot be used
+ * as system call address.
+ */
+#ifndef __s390x__
+#define VMALLOC_START	0x78000000UL
+#define VMALLOC_END	0x7e000000UL
+#define VMEM_MAP_END	0x80000000UL
+#else /* __s390x__ */
+#define VMALLOC_START	0x3e000000000UL
+#define VMALLOC_END	0x3e040000000UL
+#define VMEM_MAP_END	0x40000000000UL
+#endif /* __s390x__ */
+
+/*
+ * VMEM_MAX_PHYS is the highest physical address that can be added to the 1:1
+ * mapping. This needs to be calculated at compile time since the size of the
+ * VMEM_MAP is static but the size of struct page can change.
+ */
+#define VMEM_MAX_PAGES	((VMEM_MAP_END - VMALLOC_END) / sizeof(struct page))
+#define VMEM_MAX_PFN	min(VMALLOC_START >> PAGE_SHIFT, VMEM_MAX_PAGES)
+#define VMEM_MAX_PHYS	((VMEM_MAX_PFN << PAGE_SHIFT) & ~((16 << 20) - 1))
+#define vmemmap		((struct page *) VMALLOC_END)
+
+/*
+ * A 31 bit pagetable entry of S390 has following format:
+ *  |   PFRA          |    |  OS  |
+ * 0                   0IP0
+ * 00000000001111111111222222222233
+ * 01234567890123456789012345678901
+ *
+ * I Page-Invalid Bit:    Page is not available for address-translation
+ * P Page-Protection Bit: Store access not possible for page
+ *
+ * A 31 bit segmenttable entry of S390 has following format:
+ *  |   P-table origin      |  |PTL
+ * 0                         IC
+ * 00000000001111111111222222222233
+ * 01234567890123456789012345678901
+ *
+ * I Segment-Invalid Bit:    Segment is not available for address-translation
+ * C Common-Segment Bit:     Segment is not private (PoP 3-30)
+ * PTL Page-Table-Length:    Page-table length (PTL+1*16 entries -> up to 256)
+ *
+ * The 31 bit segmenttable origin of S390 has following format:
+ *
+ *  |S-table origin   |     | STL |
+ * X                   **GPS
+ * 00000000001111111111222222222233
+ * 01234567890123456789012345678901
+ *
+ * X Space-Switch event:
+ * G Segment-Invalid Bit:     *
+ * P Private-Space Bit:       Segment is not private (PoP 3-30)
+ * S Storage-Alteration:
+ * STL Segment-Table-Length:  Segment-table length (STL+1*16 entries -> up to 2048)
+ *
+ * A 64 bit pagetable entry of S390 has following format:
+ * |                     PFRA                         |0IP0|  OS  |
+ * 0000000000111111111122222222223333333333444444444455555555556666
+ * 0123456789012345678901234567890123456789012345678901234567890123
+ *
+ * I Page-Invalid Bit:    Page is not available for address-translation
+ * P Page-Protection Bit: Store access not possible for page
+ *
+ * A 64 bit segmenttable entry of S390 has following format:
+ * |        P-table origin                              |      TT
+ * 0000000000111111111122222222223333333333444444444455555555556666
+ * 0123456789012345678901234567890123456789012345678901234567890123
+ *
+ * I Segment-Invalid Bit:    Segment is not available for address-translation
+ * C Common-Segment Bit:     Segment is not private (PoP 3-30)
+ * P Page-Protection Bit: Store access not possible for page
+ * TT Type 00
+ *
+ * A 64 bit region table entry of S390 has following format:
+ * |        S-table origin                             |   TF  TTTL
+ * 0000000000111111111122222222223333333333444444444455555555556666
+ * 0123456789012345678901234567890123456789012345678901234567890123
+ *
+ * I Segment-Invalid Bit:    Segment is not available for address-translation
+ * TT Type 01
+ * TF
+ * TL Table length
+ *
+ * The 64 bit regiontable origin of S390 has following format:
+ * |      region table origon                          |       DTTL
+ * 0000000000111111111122222222223333333333444444444455555555556666
+ * 0123456789012345678901234567890123456789012345678901234567890123
+ *
+ * X Space-Switch event:
+ * G Segment-Invalid Bit:  
+ * P Private-Space Bit:    
+ * S Storage-Alteration:
+ * R Real space
+ * TL Table-Length:
+ *
+ * A storage key has the following format:
+ * | ACC |F|R|C|0|
+ *  0   3 4 5 6 7
+ * ACC: access key
+ * F  : fetch protection bit
+ * R  : referenced bit
+ * C  : changed bit
+ */
+
+/* Hardware bits in the page table entry */
+#define _PAGE_RO	0x200		/* HW read-only bit  */
+#define _PAGE_INVALID	0x400		/* HW invalid bit    */
+
+/* Software bits in the page table entry */
+#define _PAGE_SWT	0x001		/* SW pte type bit t */
+#define _PAGE_SWX	0x002		/* SW pte type bit x */
+#define _PAGE_SPECIAL	0x004		/* SW associated with special page */
+#define __HAVE_ARCH_PTE_SPECIAL
+
+/* Set of bits not changed in pte_modify */
+#define _PAGE_CHG_MASK	(PAGE_MASK | _PAGE_SPECIAL)
+
+/* Six different types of pages. */
+#define _PAGE_TYPE_EMPTY	0x400
+#define _PAGE_TYPE_NONE		0x401
+#define _PAGE_TYPE_SWAP		0x403
+#define _PAGE_TYPE_FILE		0x601	/* bit 0x002 is used for offset !! */
+#define _PAGE_TYPE_RO		0x200
+#define _PAGE_TYPE_RW		0x000
+#define _PAGE_TYPE_EX_RO	0x202
+#define _PAGE_TYPE_EX_RW	0x002
+
+/*
+ * Only four types for huge pages, using the invalid bit and protection bit
+ * of a segment table entry.
+ */
+#define _HPAGE_TYPE_EMPTY	0x020	/* _SEGMENT_ENTRY_INV */
+#define _HPAGE_TYPE_NONE	0x220
+#define _HPAGE_TYPE_RO		0x200	/* _SEGMENT_ENTRY_RO  */
+#define _HPAGE_TYPE_RW		0x000
+
+/*
+ * PTE type bits are rather complicated. handle_pte_fault uses pte_present,
+ * pte_none and pte_file to find out the pte type WITHOUT holding the page
+ * table lock. ptep_clear_flush on the other hand uses ptep_clear_flush to
+ * invalidate a given pte. ipte sets the hw invalid bit and clears all tlbs
+ * for the page. The page table entry is set to _PAGE_TYPE_EMPTY afterwards.
+ * This change is done while holding the lock, but the intermediate step
+ * of a previously valid pte with the hw invalid bit set can be observed by
+ * handle_pte_fault. That makes it necessary that all valid pte types with
+ * the hw invalid bit set must be distinguishable from the four pte types
+ * empty, none, swap and file.
+ *
+ *			irxt  ipte  irxt
+ * _PAGE_TYPE_EMPTY	1000   ->   1000
+ * _PAGE_TYPE_NONE	1001   ->   1001
+ * _PAGE_TYPE_SWAP	1011   ->   1011
+ * _PAGE_TYPE_FILE	11?1   ->   11?1
+ * _PAGE_TYPE_RO	0100   ->   1100
+ * _PAGE_TYPE_RW	0000   ->   1000
+ * _PAGE_TYPE_EX_RO	0110   ->   1110
+ * _PAGE_TYPE_EX_RW	0010   ->   1010
+ *
+ * pte_none is true for bits combinations 1000, 1010, 1100, 1110
+ * pte_present is true for bits combinations 0000, 0010, 0100, 0110, 1001
+ * pte_file is true for bits combinations 1101, 1111
+ * swap pte is 1011 and 0001, 0011, 0101, 0111 are invalid.
+ */
+
+/* Page status table bits for virtualization */
+#define RCP_PCL_BIT	55
+#define RCP_HR_BIT	54
+#define RCP_HC_BIT	53
+#define RCP_GR_BIT	50
+#define RCP_GC_BIT	49
+
+#ifndef __s390x__
+
+/* Bits in the segment table address-space-control-element */
+#define _ASCE_SPACE_SWITCH	0x80000000UL	/* space switch event	    */
+#define _ASCE_ORIGIN_MASK	0x7ffff000UL	/* segment table origin	    */
+#define _ASCE_PRIVATE_SPACE	0x100	/* private space control	    */
+#define _ASCE_ALT_EVENT		0x80	/* storage alteration event control */
+#define _ASCE_TABLE_LENGTH	0x7f	/* 128 x 64 entries = 8k	    */
+
+/* Bits in the segment table entry */
+#define _SEGMENT_ENTRY_ORIGIN	0x7fffffc0UL	/* page table origin	    */
+#define _SEGMENT_ENTRY_INV	0x20	/* invalid segment table entry	    */
+#define _SEGMENT_ENTRY_COMMON	0x10	/* common segment bit		    */
+#define _SEGMENT_ENTRY_PTL	0x0f	/* page table length		    */
+
+#define _SEGMENT_ENTRY		(_SEGMENT_ENTRY_PTL)
+#define _SEGMENT_ENTRY_EMPTY	(_SEGMENT_ENTRY_INV)
+
+#else /* __s390x__ */
+
+/* Bits in the segment/region table address-space-control-element */
+#define _ASCE_ORIGIN		~0xfffUL/* segment table origin		    */
+#define _ASCE_PRIVATE_SPACE	0x100	/* private space control	    */
+#define _ASCE_ALT_EVENT		0x80	/* storage alteration event control */
+#define _ASCE_SPACE_SWITCH	0x40	/* space switch event		    */
+#define _ASCE_REAL_SPACE	0x20	/* real space control		    */
+#define _ASCE_TYPE_MASK		0x0c	/* asce table type mask		    */
+#define _ASCE_TYPE_REGION1	0x0c	/* region first table type	    */
+#define _ASCE_TYPE_REGION2	0x08	/* region second table type	    */
+#define _ASCE_TYPE_REGION3	0x04	/* region third table type	    */
+#define _ASCE_TYPE_SEGMENT	0x00	/* segment table type		    */
+#define _ASCE_TABLE_LENGTH	0x03	/* region table length		    */
+
+/* Bits in the region table entry */
+#define _REGION_ENTRY_ORIGIN	~0xfffUL/* region/segment table origin	    */
+#define _REGION_ENTRY_INV	0x20	/* invalid region table entry	    */
+#define _REGION_ENTRY_TYPE_MASK	0x0c	/* region/segment table type mask   */
+#define _REGION_ENTRY_TYPE_R1	0x0c	/* region first table type	    */
+#define _REGION_ENTRY_TYPE_R2	0x08	/* region second table type	    */
+#define _REGION_ENTRY_TYPE_R3	0x04	/* region third table type	    */
+#define _REGION_ENTRY_LENGTH	0x03	/* region third length		    */
+
+#define _REGION1_ENTRY		(_REGION_ENTRY_TYPE_R1 | _REGION_ENTRY_LENGTH)
+#define _REGION1_ENTRY_EMPTY	(_REGION_ENTRY_TYPE_R1 | _REGION_ENTRY_INV)
+#define _REGION2_ENTRY		(_REGION_ENTRY_TYPE_R2 | _REGION_ENTRY_LENGTH)
+#define _REGION2_ENTRY_EMPTY	(_REGION_ENTRY_TYPE_R2 | _REGION_ENTRY_INV)
+#define _REGION3_ENTRY		(_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_LENGTH)
+#define _REGION3_ENTRY_EMPTY	(_REGION_ENTRY_TYPE_R3 | _REGION_ENTRY_INV)
+
+/* Bits in the segment table entry */
+#define _SEGMENT_ENTRY_ORIGIN	~0x7ffUL/* segment table origin		    */
+#define _SEGMENT_ENTRY_RO	0x200	/* page protection bit		    */
+#define _SEGMENT_ENTRY_INV	0x20	/* invalid segment table entry	    */
+
+#define _SEGMENT_ENTRY		(0)
+#define _SEGMENT_ENTRY_EMPTY	(_SEGMENT_ENTRY_INV)
+
+#define _SEGMENT_ENTRY_LARGE	0x400	/* STE-format control, large page   */
+#define _SEGMENT_ENTRY_CO	0x100	/* change-recording override   */
+
+#endif /* __s390x__ */
+
+/*
+ * A user page table pointer has the space-switch-event bit, the
+ * private-space-control bit and the storage-alteration-event-control
+ * bit set. A kernel page table pointer doesn't need them.
+ */
+#define _ASCE_USER_BITS		(_ASCE_SPACE_SWITCH | _ASCE_PRIVATE_SPACE | \
+				 _ASCE_ALT_EVENT)
+
+/* Bits int the storage key */
+#define _PAGE_CHANGED    0x02          /* HW changed bit                   */
+#define _PAGE_REFERENCED 0x04          /* HW referenced bit                */
+
+/*
+ * Page protection definitions.
+ */
+#define PAGE_NONE	__pgprot(_PAGE_TYPE_NONE)
+#define PAGE_RO		__pgprot(_PAGE_TYPE_RO)
+#define PAGE_RW		__pgprot(_PAGE_TYPE_RW)
+#define PAGE_EX_RO	__pgprot(_PAGE_TYPE_EX_RO)
+#define PAGE_EX_RW	__pgprot(_PAGE_TYPE_EX_RW)
+
+#define PAGE_KERNEL	PAGE_RW
+#define PAGE_COPY	PAGE_RO
+
+/*
+ * Dependent on the EXEC_PROTECT option s390 can do execute protection.
+ * Write permission always implies read permission. In theory with a
+ * primary/secondary page table execute only can be implemented but
+ * it would cost an additional bit in the pte to distinguish all the
+ * different pte types. To avoid that execute permission currently
+ * implies read permission as well.
+ */
+         /*xwr*/
+#define __P000	PAGE_NONE
+#define __P001	PAGE_RO
+#define __P010	PAGE_RO
+#define __P011	PAGE_RO
+#define __P100	PAGE_EX_RO
+#define __P101	PAGE_EX_RO
+#define __P110	PAGE_EX_RO
+#define __P111	PAGE_EX_RO
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_RO
+#define __S010	PAGE_RW
+#define __S011	PAGE_RW
+#define __S100	PAGE_EX_RO
+#define __S101	PAGE_EX_RO
+#define __S110	PAGE_EX_RW
+#define __S111	PAGE_EX_RW
+
+#ifndef __s390x__
+# define PxD_SHADOW_SHIFT	1
+#else /* __s390x__ */
+# define PxD_SHADOW_SHIFT	2
+#endif /* __s390x__ */
+
+static inline void *get_shadow_table(void *table)
+{
+	unsigned long addr, offset;
+	struct page *page;
+
+	addr = (unsigned long) table;
+	offset = addr & ((PAGE_SIZE << PxD_SHADOW_SHIFT) - 1);
+	page = virt_to_page((void *)(addr ^ offset));
+	return (void *)(addr_t)(page->index ? (page->index | offset) : 0UL);
+}
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t entry)
+{
+	*ptep = entry;
+	if (mm->context.noexec) {
+		if (!(pte_val(entry) & _PAGE_INVALID) &&
+		    (pte_val(entry) & _PAGE_SWX))
+			pte_val(entry) |= _PAGE_RO;
+		else
+			pte_val(entry) = _PAGE_TYPE_EMPTY;
+		ptep[PTRS_PER_PTE] = entry;
+	}
+}
+
+/*
+ * pgd/pmd/pte query functions
+ */
+#ifndef __s390x__
+
+static inline int pgd_present(pgd_t pgd) { return 1; }
+static inline int pgd_none(pgd_t pgd)    { return 0; }
+static inline int pgd_bad(pgd_t pgd)     { return 0; }
+
+static inline int pud_present(pud_t pud) { return 1; }
+static inline int pud_none(pud_t pud)	 { return 0; }
+static inline int pud_bad(pud_t pud)	 { return 0; }
+
+#else /* __s390x__ */
+
+static inline int pgd_present(pgd_t pgd)
+{
+	if ((pgd_val(pgd) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R2)
+		return 1;
+	return (pgd_val(pgd) & _REGION_ENTRY_ORIGIN) != 0UL;
+}
+
+static inline int pgd_none(pgd_t pgd)
+{
+	if ((pgd_val(pgd) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R2)
+		return 0;
+	return (pgd_val(pgd) & _REGION_ENTRY_INV) != 0UL;
+}
+
+static inline int pgd_bad(pgd_t pgd)
+{
+	/*
+	 * With dynamic page table levels the pgd can be a region table
+	 * entry or a segment table entry. Check for the bit that are
+	 * invalid for either table entry.
+	 */
+	unsigned long mask =
+		~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INV &
+		~_REGION_ENTRY_TYPE_MASK & ~_REGION_ENTRY_LENGTH;
+	return (pgd_val(pgd) & mask) != 0;
+}
+
+static inline int pud_present(pud_t pud)
+{
+	if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R3)
+		return 1;
+	return (pud_val(pud) & _REGION_ENTRY_ORIGIN) != 0UL;
+}
+
+static inline int pud_none(pud_t pud)
+{
+	if ((pud_val(pud) & _REGION_ENTRY_TYPE_MASK) < _REGION_ENTRY_TYPE_R3)
+		return 0;
+	return (pud_val(pud) & _REGION_ENTRY_INV) != 0UL;
+}
+
+static inline int pud_bad(pud_t pud)
+{
+	/*
+	 * With dynamic page table levels the pud can be a region table
+	 * entry or a segment table entry. Check for the bit that are
+	 * invalid for either table entry.
+	 */
+	unsigned long mask =
+		~_SEGMENT_ENTRY_ORIGIN & ~_REGION_ENTRY_INV &
+		~_REGION_ENTRY_TYPE_MASK & ~_REGION_ENTRY_LENGTH;
+	return (pud_val(pud) & mask) != 0;
+}
+
+#endif /* __s390x__ */
+
+static inline int pmd_present(pmd_t pmd)
+{
+	return (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) != 0UL;
+}
+
+static inline int pmd_none(pmd_t pmd)
+{
+	return (pmd_val(pmd) & _SEGMENT_ENTRY_INV) != 0UL;
+}
+
+static inline int pmd_bad(pmd_t pmd)
+{
+	unsigned long mask = ~_SEGMENT_ENTRY_ORIGIN & ~_SEGMENT_ENTRY_INV;
+	return (pmd_val(pmd) & mask) != _SEGMENT_ENTRY;
+}
+
+static inline int pte_none(pte_t pte)
+{
+	return (pte_val(pte) & _PAGE_INVALID) && !(pte_val(pte) & _PAGE_SWT);
+}
+
+static inline int pte_present(pte_t pte)
+{
+	unsigned long mask = _PAGE_RO | _PAGE_INVALID | _PAGE_SWT | _PAGE_SWX;
+	return (pte_val(pte) & mask) == _PAGE_TYPE_NONE ||
+		(!(pte_val(pte) & _PAGE_INVALID) &&
+		 !(pte_val(pte) & _PAGE_SWT));
+}
+
+static inline int pte_file(pte_t pte)
+{
+	unsigned long mask = _PAGE_RO | _PAGE_INVALID | _PAGE_SWT;
+	return (pte_val(pte) & mask) == _PAGE_TYPE_FILE;
+}
+
+static inline int pte_special(pte_t pte)
+{
+	return (pte_val(pte) & _PAGE_SPECIAL);
+}
+
+#define __HAVE_ARCH_PTE_SAME
+#define pte_same(a,b)  (pte_val(a) == pte_val(b))
+
+static inline void rcp_lock(pte_t *ptep)
+{
+#ifdef CONFIG_PGSTE
+	unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE);
+	preempt_disable();
+	while (test_and_set_bit(RCP_PCL_BIT, pgste))
+		;
+#endif
+}
+
+static inline void rcp_unlock(pte_t *ptep)
+{
+#ifdef CONFIG_PGSTE
+	unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE);
+	clear_bit(RCP_PCL_BIT, pgste);
+	preempt_enable();
+#endif
+}
+
+/* forward declaration for SetPageUptodate in page-flags.h*/
+static inline void page_clear_dirty(struct page *page);
+#include <linux/page-flags.h>
+
+static inline void ptep_rcp_copy(pte_t *ptep)
+{
+#ifdef CONFIG_PGSTE
+	struct page *page = virt_to_page(pte_val(*ptep));
+	unsigned int skey;
+	unsigned long *pgste = (unsigned long *) (ptep + PTRS_PER_PTE);
+
+	skey = page_get_storage_key(page_to_phys(page));
+	if (skey & _PAGE_CHANGED)
+		set_bit_simple(RCP_GC_BIT, pgste);
+	if (skey & _PAGE_REFERENCED)
+		set_bit_simple(RCP_GR_BIT, pgste);
+	if (test_and_clear_bit_simple(RCP_HC_BIT, pgste))
+		SetPageDirty(page);
+	if (test_and_clear_bit_simple(RCP_HR_BIT, pgste))
+		SetPageReferenced(page);
+#endif
+}
+
+/*
+ * query functions pte_write/pte_dirty/pte_young only work if
+ * pte_present() is true. Undefined behaviour if not..
+ */
+static inline int pte_write(pte_t pte)
+{
+	return (pte_val(pte) & _PAGE_RO) == 0;
+}
+
+static inline int pte_dirty(pte_t pte)
+{
+	/* A pte is neither clean nor dirty on s/390. The dirty bit
+	 * is in the storage key. See page_test_and_clear_dirty for
+	 * details.
+	 */
+	return 0;
+}
+
+static inline int pte_young(pte_t pte)
+{
+	/* A pte is neither young nor old on s/390. The young bit
+	 * is in the storage key. See page_test_and_clear_young for
+	 * details.
+	 */
+	return 0;
+}
+
+/*
+ * pgd/pmd/pte modification functions
+ */
+
+#ifndef __s390x__
+
+#define pgd_clear(pgd)		do { } while (0)
+#define pud_clear(pud)		do { } while (0)
+
+#else /* __s390x__ */
+
+static inline void pgd_clear_kernel(pgd_t * pgd)
+{
+	if ((pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R2)
+		pgd_val(*pgd) = _REGION2_ENTRY_EMPTY;
+}
+
+static inline void pgd_clear(pgd_t * pgd)
+{
+	pgd_t *shadow = get_shadow_table(pgd);
+
+	pgd_clear_kernel(pgd);
+	if (shadow)
+		pgd_clear_kernel(shadow);
+}
+
+static inline void pud_clear_kernel(pud_t *pud)
+{
+	if ((pud_val(*pud) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3)
+		pud_val(*pud) = _REGION3_ENTRY_EMPTY;
+}
+
+static inline void pud_clear(pud_t *pud)
+{
+	pud_t *shadow = get_shadow_table(pud);
+
+	pud_clear_kernel(pud);
+	if (shadow)
+		pud_clear_kernel(shadow);
+}
+
+#endif /* __s390x__ */
+
+static inline void pmd_clear_kernel(pmd_t * pmdp)
+{
+	pmd_val(*pmdp) = _SEGMENT_ENTRY_EMPTY;
+}
+
+static inline void pmd_clear(pmd_t *pmd)
+{
+	pmd_t *shadow = get_shadow_table(pmd);
+
+	pmd_clear_kernel(pmd);
+	if (shadow)
+		pmd_clear_kernel(shadow);
+}
+
+static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+	if (mm->context.pgstes)
+		ptep_rcp_copy(ptep);
+	pte_val(*ptep) = _PAGE_TYPE_EMPTY;
+	if (mm->context.noexec)
+		pte_val(ptep[PTRS_PER_PTE]) = _PAGE_TYPE_EMPTY;
+}
+
+/*
+ * The following pte modification functions only work if
+ * pte_present() is true. Undefined behaviour if not..
+ */
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte_val(pte) &= _PAGE_CHG_MASK;
+	pte_val(pte) |= pgprot_val(newprot);
+	return pte;
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	/* Do not clobber _PAGE_TYPE_NONE pages!  */
+	if (!(pte_val(pte) & _PAGE_INVALID))
+		pte_val(pte) |= _PAGE_RO;
+	return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	pte_val(pte) &= ~_PAGE_RO;
+	return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	/* The only user of pte_mkclean is the fork() code.
+	   We must *not* clear the *physical* page dirty bit
+	   just because fork() wants to clear the dirty bit in
+	   *one* of the page's mappings.  So we just do nothing. */
+	return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	/* We do not explicitly set the dirty bit because the
+	 * sske instruction is slow. It is faster to let the
+	 * next instruction set the dirty bit.
+	 */
+	return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	/* S/390 doesn't keep its dirty/referenced bit in the pte.
+	 * There is no point in clearing the real referenced bit.
+	 */
+	return pte;
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	/* S/390 doesn't keep its dirty/referenced bit in the pte.
+	 * There is no point in setting the real referenced bit.
+	 */
+	return pte;
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	pte_val(pte) |= _PAGE_SPECIAL;
+	return pte;
+}
+
+#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
+static inline int ptep_test_and_clear_young(struct vm_area_struct *vma,
+					    unsigned long addr, pte_t *ptep)
+{
+#ifdef CONFIG_PGSTE
+	unsigned long physpage;
+	int young;
+	unsigned long *pgste;
+
+	if (!vma->vm_mm->context.pgstes)
+		return 0;
+	physpage = pte_val(*ptep) & PAGE_MASK;
+	pgste = (unsigned long *) (ptep + PTRS_PER_PTE);
+
+	young = ((page_get_storage_key(physpage) & _PAGE_REFERENCED) != 0);
+	rcp_lock(ptep);
+	if (young)
+		set_bit_simple(RCP_GR_BIT, pgste);
+	young |= test_and_clear_bit_simple(RCP_HR_BIT, pgste);
+	rcp_unlock(ptep);
+	return young;
+#endif
+	return 0;
+}
+
+#define __HAVE_ARCH_PTEP_CLEAR_YOUNG_FLUSH
+static inline int ptep_clear_flush_young(struct vm_area_struct *vma,
+					 unsigned long address, pte_t *ptep)
+{
+	/* No need to flush TLB
+	 * On s390 reference bits are in storage key and never in TLB
+	 * With virtualization we handle the reference bit, without we
+	 * we can simply return */
+#ifdef CONFIG_PGSTE
+	return ptep_test_and_clear_young(vma, address, ptep);
+#endif
+	return 0;
+}
+
+static inline void __ptep_ipte(unsigned long address, pte_t *ptep)
+{
+	if (!(pte_val(*ptep) & _PAGE_INVALID)) {
+#ifndef __s390x__
+		/* pto must point to the start of the segment table */
+		pte_t *pto = (pte_t *) (((unsigned long) ptep) & 0x7ffffc00);
+#else
+		/* ipte in zarch mode can do the math */
+		pte_t *pto = ptep;
+#endif
+		asm volatile(
+			"	ipte	%2,%3"
+			: "=m" (*ptep) : "m" (*ptep),
+			  "a" (pto), "a" (address));
+	}
+}
+
+static inline void ptep_invalidate(struct mm_struct *mm,
+				   unsigned long address, pte_t *ptep)
+{
+	if (mm->context.pgstes) {
+		rcp_lock(ptep);
+		__ptep_ipte(address, ptep);
+		ptep_rcp_copy(ptep);
+		pte_val(*ptep) = _PAGE_TYPE_EMPTY;
+		rcp_unlock(ptep);
+		return;
+	}
+	__ptep_ipte(address, ptep);
+	pte_val(*ptep) = _PAGE_TYPE_EMPTY;
+	if (mm->context.noexec) {
+		__ptep_ipte(address, ptep + PTRS_PER_PTE);
+		pte_val(*(ptep + PTRS_PER_PTE)) = _PAGE_TYPE_EMPTY;
+	}
+}
+
+/*
+ * This is hard to understand. ptep_get_and_clear and ptep_clear_flush
+ * both clear the TLB for the unmapped pte. The reason is that
+ * ptep_get_and_clear is used in common code (e.g. change_pte_range)
+ * to modify an active pte. The sequence is
+ *   1) ptep_get_and_clear
+ *   2) set_pte_at
+ *   3) flush_tlb_range
+ * On s390 the tlb needs to get flushed with the modification of the pte
+ * if the pte is active. The only way how this can be implemented is to
+ * have ptep_get_and_clear do the tlb flush. In exchange flush_tlb_range
+ * is a nop.
+ */
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+#define ptep_get_and_clear(__mm, __address, __ptep)			\
+({									\
+	pte_t __pte = *(__ptep);					\
+	if (atomic_read(&(__mm)->mm_users) > 1 ||			\
+	    (__mm) != current->active_mm)				\
+		ptep_invalidate(__mm, __address, __ptep);		\
+	else								\
+		pte_clear((__mm), (__address), (__ptep));		\
+	__pte;								\
+})
+
+#define __HAVE_ARCH_PTEP_CLEAR_FLUSH
+static inline pte_t ptep_clear_flush(struct vm_area_struct *vma,
+				     unsigned long address, pte_t *ptep)
+{
+	pte_t pte = *ptep;
+	ptep_invalidate(vma->vm_mm, address, ptep);
+	return pte;
+}
+
+/*
+ * The batched pte unmap code uses ptep_get_and_clear_full to clear the
+ * ptes. Here an optimization is possible. tlb_gather_mmu flushes all
+ * tlbs of an mm if it can guarantee that the ptes of the mm_struct
+ * cannot be accessed while the batched unmap is running. In this case
+ * full==1 and a simple pte_clear is enough. See tlb.h.
+ */
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR_FULL
+static inline pte_t ptep_get_and_clear_full(struct mm_struct *mm,
+					    unsigned long addr,
+					    pte_t *ptep, int full)
+{
+	pte_t pte = *ptep;
+
+	if (full)
+		pte_clear(mm, addr, ptep);
+	else
+		ptep_invalidate(mm, addr, ptep);
+	return pte;
+}
+
+#define __HAVE_ARCH_PTEP_SET_WRPROTECT
+#define ptep_set_wrprotect(__mm, __addr, __ptep)			\
+({									\
+	pte_t __pte = *(__ptep);					\
+	if (pte_write(__pte)) {						\
+		if (atomic_read(&(__mm)->mm_users) > 1 ||		\
+		    (__mm) != current->active_mm)			\
+			ptep_invalidate(__mm, __addr, __ptep);		\
+		set_pte_at(__mm, __addr, __ptep, pte_wrprotect(__pte));	\
+	}								\
+})
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+#define ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty)	\
+({									\
+	int __changed = !pte_same(*(__ptep), __entry);			\
+	if (__changed) {						\
+		ptep_invalidate((__vma)->vm_mm, __addr, __ptep);	\
+		set_pte_at((__vma)->vm_mm, __addr, __ptep, __entry);	\
+	}								\
+	__changed;							\
+})
+
+/*
+ * Test and clear dirty bit in storage key.
+ * We can't clear the changed bit atomically. This is a potential
+ * race against modification of the referenced bit. This function
+ * should therefore only be called if it is not mapped in any
+ * address space.
+ */
+#define __HAVE_ARCH_PAGE_TEST_DIRTY
+static inline int page_test_dirty(struct page *page)
+{
+	return (page_get_storage_key(page_to_phys(page)) & _PAGE_CHANGED) != 0;
+}
+
+#define __HAVE_ARCH_PAGE_CLEAR_DIRTY
+static inline void page_clear_dirty(struct page *page)
+{
+	page_set_storage_key(page_to_phys(page), PAGE_DEFAULT_KEY);
+}
+
+/*
+ * Test and clear referenced bit in storage key.
+ */
+#define __HAVE_ARCH_PAGE_TEST_AND_CLEAR_YOUNG
+static inline int page_test_and_clear_young(struct page *page)
+{
+	unsigned long physpage = page_to_phys(page);
+	int ccode;
+
+	asm volatile(
+		"	rrbe	0,%1\n"
+		"	ipm	%0\n"
+		"	srl	%0,28\n"
+		: "=d" (ccode) : "a" (physpage) : "cc" );
+	return ccode & 2;
+}
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot)
+{
+	pte_t __pte;
+	pte_val(__pte) = physpage + pgprot_val(pgprot);
+	return __pte;
+}
+
+static inline pte_t mk_pte(struct page *page, pgprot_t pgprot)
+{
+	unsigned long physpage = page_to_phys(page);
+
+	return mk_pte_phys(physpage, pgprot);
+}
+
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pud_index(address) (((address) >> PUD_SHIFT) & (PTRS_PER_PUD-1))
+#define pmd_index(address) (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1))
+#define pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE-1))
+
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+#ifndef __s390x__
+
+#define pmd_deref(pmd) (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN)
+#define pud_deref(pmd) ({ BUG(); 0UL; })
+#define pgd_deref(pmd) ({ BUG(); 0UL; })
+
+#define pud_offset(pgd, address) ((pud_t *) pgd)
+#define pmd_offset(pud, address) ((pmd_t *) pud + pmd_index(address))
+
+#else /* __s390x__ */
+
+#define pmd_deref(pmd) (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN)
+#define pud_deref(pud) (pud_val(pud) & _REGION_ENTRY_ORIGIN)
+#define pgd_deref(pgd) (pgd_val(pgd) & _REGION_ENTRY_ORIGIN)
+
+static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
+{
+	pud_t *pud = (pud_t *) pgd;
+	if ((pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R2)
+		pud = (pud_t *) pgd_deref(*pgd);
+	return pud  + pud_index(address);
+}
+
+static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
+{
+	pmd_t *pmd = (pmd_t *) pud;
+	if ((pud_val(*pud) & _REGION_ENTRY_TYPE_MASK) == _REGION_ENTRY_TYPE_R3)
+		pmd = (pmd_t *) pud_deref(*pud);
+	return pmd + pmd_index(address);
+}
+
+#endif /* __s390x__ */
+
+#define pfn_pte(pfn,pgprot) mk_pte_phys(__pa((pfn) << PAGE_SHIFT),(pgprot))
+#define pte_pfn(x) (pte_val(x) >> PAGE_SHIFT)
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
+#define pmd_page(pmd) pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)
+
+/* Find an entry in the lowest level page table.. */
+#define pte_offset(pmd, addr) ((pte_t *) pmd_deref(*(pmd)) + pte_index(addr))
+#define pte_offset_kernel(pmd, address) pte_offset(pmd,address)
+#define pte_offset_map(pmd, address) pte_offset_kernel(pmd, address)
+#define pte_offset_map_nested(pmd, address) pte_offset_kernel(pmd, address)
+#define pte_unmap(pte) do { } while (0)
+#define pte_unmap_nested(pte) do { } while (0)
+
+/*
+ * 31 bit swap entry format:
+ * A page-table entry has some bits we have to treat in a special way.
+ * Bits 0, 20 and bit 23 have to be zero, otherwise an specification
+ * exception will occur instead of a page translation exception. The
+ * specifiation exception has the bad habit not to store necessary
+ * information in the lowcore.
+ * Bit 21 and bit 22 are the page invalid bit and the page protection
+ * bit. We set both to indicate a swapped page.
+ * Bit 30 and 31 are used to distinguish the different page types. For
+ * a swapped page these bits need to be zero.
+ * This leaves the bits 1-19 and bits 24-29 to store type and offset.
+ * We use the 5 bits from 25-29 for the type and the 20 bits from 1-19
+ * plus 24 for the offset.
+ * 0|     offset        |0110|o|type |00|
+ * 0 0000000001111111111 2222 2 22222 33
+ * 0 1234567890123456789 0123 4 56789 01
+ *
+ * 64 bit swap entry format:
+ * A page-table entry has some bits we have to treat in a special way.
+ * Bits 52 and bit 55 have to be zero, otherwise an specification
+ * exception will occur instead of a page translation exception. The
+ * specifiation exception has the bad habit not to store necessary
+ * information in the lowcore.
+ * Bit 53 and bit 54 are the page invalid bit and the page protection
+ * bit. We set both to indicate a swapped page.
+ * Bit 62 and 63 are used to distinguish the different page types. For
+ * a swapped page these bits need to be zero.
+ * This leaves the bits 0-51 and bits 56-61 to store type and offset.
+ * We use the 5 bits from 57-61 for the type and the 53 bits from 0-51
+ * plus 56 for the offset.
+ * |                      offset                        |0110|o|type |00|
+ *  0000000000111111111122222222223333333333444444444455 5555 5 55566 66
+ *  0123456789012345678901234567890123456789012345678901 2345 6 78901 23
+ */
+#ifndef __s390x__
+#define __SWP_OFFSET_MASK (~0UL >> 12)
+#else
+#define __SWP_OFFSET_MASK (~0UL >> 11)
+#endif
+static inline pte_t mk_swap_pte(unsigned long type, unsigned long offset)
+{
+	pte_t pte;
+	offset &= __SWP_OFFSET_MASK;
+	pte_val(pte) = _PAGE_TYPE_SWAP | ((type & 0x1f) << 2) |
+		((offset & 1UL) << 7) | ((offset & ~1UL) << 11);
+	return pte;
+}
+
+#define __swp_type(entry)	(((entry).val >> 2) & 0x1f)
+#define __swp_offset(entry)	(((entry).val >> 11) | (((entry).val >> 7) & 1))
+#define __swp_entry(type,offset) ((swp_entry_t) { pte_val(mk_swap_pte((type),(offset))) })
+
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+#ifndef __s390x__
+# define PTE_FILE_MAX_BITS	26
+#else /* __s390x__ */
+# define PTE_FILE_MAX_BITS	59
+#endif /* __s390x__ */
+
+#define pte_to_pgoff(__pte) \
+	((((__pte).pte >> 12) << 7) + (((__pte).pte >> 1) & 0x7f))
+
+#define pgoff_to_pte(__off) \
+	((pte_t) { ((((__off) & 0x7f) << 1) + (((__off) >> 7) << 12)) \
+		   | _PAGE_TYPE_FILE })
+
+#endif /* !__ASSEMBLY__ */
+
+#define kern_addr_valid(addr)   (1)
+
+extern int vmem_add_mapping(unsigned long start, unsigned long size);
+extern int vmem_remove_mapping(unsigned long start, unsigned long size);
+extern int s390_enable_sie(void);
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+#include <asm-generic/pgtable.h>
+
+#endif /* _S390_PAGE_H */
diff --git a/arch/s390/include/asm/poll.h b/arch/s390/include/asm/poll.h
new file mode 100644
index 000000000000..c98509d3149e
--- /dev/null
+++ b/arch/s390/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/s390/include/asm/posix_types.h b/arch/s390/include/asm/posix_types.h
new file mode 100644
index 000000000000..397d93fba3a7
--- /dev/null
+++ b/arch/s390/include/asm/posix_types.h
@@ -0,0 +1,111 @@
+/*
+ *  include/asm-s390/posix_types.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/posix_types.h"
+ */
+
+#ifndef __ARCH_S390_POSIX_TYPES_H
+#define __ARCH_S390_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef long            __kernel_off_t;
+typedef int             __kernel_pid_t;
+typedef unsigned long   __kernel_size_t;
+typedef long            __kernel_time_t;
+typedef long            __kernel_suseconds_t;
+typedef long            __kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int             __kernel_daddr_t;
+typedef char *          __kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+
+#ifdef __GNUC__
+typedef long long       __kernel_loff_t;
+#endif
+
+#ifndef __s390x__
+
+typedef unsigned long   __kernel_ino_t;
+typedef unsigned short  __kernel_mode_t;
+typedef unsigned short  __kernel_nlink_t;
+typedef unsigned short  __kernel_ipc_pid_t;
+typedef unsigned short  __kernel_uid_t;
+typedef unsigned short  __kernel_gid_t;
+typedef int             __kernel_ssize_t;
+typedef int             __kernel_ptrdiff_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#else /* __s390x__ */
+
+typedef unsigned int    __kernel_ino_t;
+typedef unsigned int    __kernel_mode_t;
+typedef unsigned int    __kernel_nlink_t;
+typedef int             __kernel_ipc_pid_t;
+typedef unsigned int    __kernel_uid_t;
+typedef unsigned int    __kernel_gid_t;
+typedef long            __kernel_ssize_t;
+typedef long            __kernel_ptrdiff_t;
+typedef unsigned long   __kernel_sigset_t;      /* at least 32 bits */
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef __kernel_gid_t __kernel_old_gid_t;
+typedef __kernel_uid_t __kernel_uid32_t;
+typedef __kernel_gid_t __kernel_gid32_t;
+typedef unsigned short __kernel_old_dev_t;
+
+#endif /* __s390x__ */
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+        int     val[2];
+#else                        /* !defined(__KERNEL__) && !defined(__USE_ALL)*/
+        int     __val[2];
+#endif                       /* !defined(__KERNEL__) && !defined(__USE_ALL)*/
+} __kernel_fsid_t;
+
+
+#ifdef __KERNEL__
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long fd, const __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (fdsetp->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+#undef  __FD_ZERO
+#define __FD_ZERO(fdsetp) \
+	((void) memset ((void *) (fdsetp), 0, sizeof (__kernel_fd_set)))
+
+#endif     /* __KERNEL__ */
+
+#endif
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
new file mode 100644
index 000000000000..4af80af2a88f
--- /dev/null
+++ b/arch/s390/include/asm/processor.h
@@ -0,0 +1,360 @@
+/*
+ *  include/asm-s390/processor.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/processor.h"
+ *    Copyright (C) 1994, Linus Torvalds
+ */
+
+#ifndef __ASM_S390_PROCESSOR_H
+#define __ASM_S390_PROCESSOR_H
+
+#include <asm/ptrace.h>
+
+#ifdef __KERNEL__
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; })
+
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *  Members of this structure are referenced in head.S, so think twice
+ *  before touching them. [mj]
+ */
+
+typedef struct
+{
+        unsigned int version :  8;
+        unsigned int ident   : 24;
+        unsigned int machine : 16;
+        unsigned int unused  : 16;
+} __attribute__ ((packed)) cpuid_t;
+
+static inline void get_cpu_id(cpuid_t *ptr)
+{
+	asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr));
+}
+
+struct cpuinfo_S390
+{
+        cpuid_t  cpu_id;
+        __u16    cpu_addr;
+        __u16    cpu_nr;
+        unsigned long loops_per_jiffy;
+        unsigned long *pgd_quick;
+#ifdef __s390x__
+        unsigned long *pmd_quick;
+#endif /* __s390x__ */
+        unsigned long *pte_quick;
+        unsigned long pgtable_cache_sz;
+};
+
+extern void s390_adjust_jiffies(void);
+extern void print_cpu_info(struct cpuinfo_S390 *);
+extern int get_cpu_capability(unsigned int *);
+
+/*
+ * User space process size: 2GB for 31 bit, 4TB for 64 bit.
+ */
+#ifndef __s390x__
+
+#define TASK_SIZE		(1UL << 31)
+#define TASK_UNMAPPED_BASE	(1UL << 30)
+
+#else /* __s390x__ */
+
+#define TASK_SIZE_OF(tsk)	(test_tsk_thread_flag(tsk,TIF_31BIT) ? \
+					(1UL << 31) : (1UL << 53))
+#define TASK_UNMAPPED_BASE	(test_thread_flag(TIF_31BIT) ? \
+					(1UL << 30) : (1UL << 41))
+#define TASK_SIZE		TASK_SIZE_OF(current)
+
+#endif /* __s390x__ */
+
+#ifdef __KERNEL__
+
+#ifndef __s390x__
+#define STACK_TOP		(1UL << 31)
+#define STACK_TOP_MAX		(1UL << 31)
+#else /* __s390x__ */
+#define STACK_TOP		(1UL << (test_thread_flag(TIF_31BIT) ? 31:42))
+#define STACK_TOP_MAX		(1UL << 42)
+#endif /* __s390x__ */
+
+
+#endif
+
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
+typedef struct {
+        __u32 ar4;
+} mm_segment_t;
+
+/*
+ * Thread structure
+ */
+struct thread_struct {
+	s390_fp_regs fp_regs;
+	unsigned int  acrs[NUM_ACRS];
+        unsigned long ksp;              /* kernel stack pointer             */
+	mm_segment_t mm_segment;
+        unsigned long prot_addr;        /* address of protection-excep.     */
+        unsigned int trap_no;
+        per_struct per_info;
+	/* Used to give failing instruction back to user for ieee exceptions */
+	unsigned long ieee_instruction_pointer; 
+        /* pfault_wait is used to block the process on a pfault event */
+	unsigned long pfault_wait;
+};
+
+typedef struct thread_struct thread_struct;
+
+/*
+ * Stack layout of a C stack frame.
+ */
+#ifndef __PACK_STACK
+struct stack_frame {
+	unsigned long back_chain;
+	unsigned long empty1[5];
+	unsigned long gprs[10];
+	unsigned int  empty2[8];
+};
+#else
+struct stack_frame {
+	unsigned long empty1[5];
+	unsigned int  empty2[8];
+	unsigned long gprs[10];
+	unsigned long back_chain;
+};
+#endif
+
+#define ARCH_MIN_TASKALIGN	8
+
+#define INIT_THREAD {							\
+	.ksp = sizeof(init_stack) + (unsigned long) &init_stack,	\
+}
+
+/*
+ * Do necessary setup to start up a new thread.
+ */
+#define start_thread(regs, new_psw, new_stackp) do {		\
+	set_fs(USER_DS);					\
+	regs->psw.mask	= psw_user_bits;			\
+	regs->psw.addr	= new_psw | PSW_ADDR_AMODE;		\
+	regs->gprs[15]	= new_stackp;				\
+} while (0)
+
+#define start_thread31(regs, new_psw, new_stackp) do {		\
+	set_fs(USER_DS);					\
+	regs->psw.mask	= psw_user32_bits;			\
+	regs->psw.addr	= new_psw | PSW_ADDR_AMODE;		\
+	regs->gprs[15]	= new_stackp;				\
+	crst_table_downgrade(current->mm, 1UL << 31);		\
+} while (0)
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+struct seq_file;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+extern unsigned long thread_saved_pc(struct task_struct *t);
+
+/*
+ * Print register of task into buffer. Used in fs/proc/array.c.
+ */
+extern void task_show_regs(struct seq_file *m, struct task_struct *task);
+
+extern void show_code(struct pt_regs *regs);
+
+unsigned long get_wchan(struct task_struct *p);
+#define task_pt_regs(tsk) ((struct pt_regs *) \
+        (task_stack_page(tsk) + THREAD_SIZE) - 1)
+#define KSTK_EIP(tsk)	(task_pt_regs(tsk)->psw.addr)
+#define KSTK_ESP(tsk)	(task_pt_regs(tsk)->gprs[15])
+
+/*
+ * Give up the time slice of the virtual PU.
+ */
+static inline void cpu_relax(void)
+{
+	if (MACHINE_HAS_DIAG44)
+		asm volatile("diag 0,0,68");
+	barrier();
+}
+
+static inline void psw_set_key(unsigned int key)
+{
+	asm volatile("spka 0(%0)" : : "d" (key));
+}
+
+/*
+ * Set PSW to specified value.
+ */
+static inline void __load_psw(psw_t psw)
+{
+#ifndef __s390x__
+	asm volatile("lpsw  0(%0)" : : "a" (&psw), "m" (psw) : "cc");
+#else
+	asm volatile("lpswe 0(%0)" : : "a" (&psw), "m" (psw) : "cc");
+#endif
+}
+
+/*
+ * Set PSW mask to specified value, while leaving the
+ * PSW addr pointing to the next instruction.
+ */
+
+static inline void __load_psw_mask (unsigned long mask)
+{
+	unsigned long addr;
+	psw_t psw;
+
+	psw.mask = mask;
+
+#ifndef __s390x__
+	asm volatile(
+		"	basr	%0,0\n"
+		"0:	ahi	%0,1f-0b\n"
+		"	st	%0,4(%1)\n"
+		"	lpsw	0(%1)\n"
+		"1:"
+		: "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc");
+#else /* __s390x__ */
+	asm volatile(
+		"	larl	%0,1f\n"
+		"	stg	%0,8(%1)\n"
+		"	lpswe	0(%1)\n"
+		"1:"
+		: "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc");
+#endif /* __s390x__ */
+}
+ 
+/*
+ * Function to stop a processor until an interruption occurred
+ */
+static inline void enabled_wait(void)
+{
+	__load_psw_mask(PSW_BASE_BITS | PSW_MASK_IO | PSW_MASK_EXT |
+			PSW_MASK_MCHECK | PSW_MASK_WAIT | PSW_DEFAULT_KEY);
+}
+
+/*
+ * Function to drop a processor into disabled wait state
+ */
+
+static inline void disabled_wait(unsigned long code)
+{
+        unsigned long ctl_buf;
+        psw_t dw_psw;
+
+        dw_psw.mask = PSW_BASE_BITS | PSW_MASK_WAIT;
+        dw_psw.addr = code;
+        /* 
+         * Store status and then load disabled wait psw,
+         * the processor is dead afterwards
+         */
+#ifndef __s390x__
+	asm volatile(
+		"	stctl	0,0,0(%2)\n"
+		"	ni	0(%2),0xef\n"	/* switch off protection */
+		"	lctl	0,0,0(%2)\n"
+		"	stpt	0xd8\n"		/* store timer */
+		"	stckc	0xe0\n"		/* store clock comparator */
+		"	stpx	0x108\n"	/* store prefix register */
+		"	stam	0,15,0x120\n"	/* store access registers */
+		"	std	0,0x160\n"	/* store f0 */
+		"	std	2,0x168\n"	/* store f2 */
+		"	std	4,0x170\n"	/* store f4 */
+		"	std	6,0x178\n"	/* store f6 */
+		"	stm	0,15,0x180\n"	/* store general registers */
+		"	stctl	0,15,0x1c0\n"	/* store control registers */
+		"	oi	0x1c0,0x10\n"	/* fake protection bit */
+		"	lpsw	0(%1)"
+		: "=m" (ctl_buf)
+		: "a" (&dw_psw), "a" (&ctl_buf), "m" (dw_psw) : "cc");
+#else /* __s390x__ */
+	asm volatile(
+		"	stctg	0,0,0(%2)\n"
+		"	ni	4(%2),0xef\n"	/* switch off protection */
+		"	lctlg	0,0,0(%2)\n"
+		"	lghi	1,0x1000\n"
+		"	stpt	0x328(1)\n"	/* store timer */
+		"	stckc	0x330(1)\n"	/* store clock comparator */
+		"	stpx	0x318(1)\n"	/* store prefix register */
+		"	stam	0,15,0x340(1)\n"/* store access registers */
+		"	stfpc	0x31c(1)\n"	/* store fpu control */
+		"	std	0,0x200(1)\n"	/* store f0 */
+		"	std	1,0x208(1)\n"	/* store f1 */
+		"	std	2,0x210(1)\n"	/* store f2 */
+		"	std	3,0x218(1)\n"	/* store f3 */
+		"	std	4,0x220(1)\n"	/* store f4 */
+		"	std	5,0x228(1)\n"	/* store f5 */
+		"	std	6,0x230(1)\n"	/* store f6 */
+		"	std	7,0x238(1)\n"	/* store f7 */
+		"	std	8,0x240(1)\n"	/* store f8 */
+		"	std	9,0x248(1)\n"	/* store f9 */
+		"	std	10,0x250(1)\n"	/* store f10 */
+		"	std	11,0x258(1)\n"	/* store f11 */
+		"	std	12,0x260(1)\n"	/* store f12 */
+		"	std	13,0x268(1)\n"	/* store f13 */
+		"	std	14,0x270(1)\n"	/* store f14 */
+		"	std	15,0x278(1)\n"	/* store f15 */
+		"	stmg	0,15,0x280(1)\n"/* store general registers */
+		"	stctg	0,15,0x380(1)\n"/* store control registers */
+		"	oi	0x384(1),0x10\n"/* fake protection bit */
+		"	lpswe	0(%1)"
+		: "=m" (ctl_buf)
+		: "a" (&dw_psw), "a" (&ctl_buf), "m" (dw_psw) : "cc", "0");
+#endif /* __s390x__ */
+}
+
+/*
+ * Basic Machine Check/Program Check Handler.
+ */
+
+extern void s390_base_mcck_handler(void);
+extern void s390_base_pgm_handler(void);
+extern void s390_base_ext_handler(void);
+
+extern void (*s390_base_mcck_handler_fn)(void);
+extern void (*s390_base_pgm_handler_fn)(void);
+extern void (*s390_base_ext_handler_fn)(void);
+
+#define ARCH_LOW_ADDRESS_LIMIT	0x7fffffffUL
+
+#endif
+
+/*
+ * Helper macro for exception table entries
+ */
+#ifndef __s390x__
+#define EX_TABLE(_fault,_target)			\
+	".section __ex_table,\"a\"\n"			\
+	"	.align 4\n"				\
+	"	.long  " #_fault "," #_target "\n"	\
+	".previous\n"
+#else
+#define EX_TABLE(_fault,_target)			\
+	".section __ex_table,\"a\"\n"			\
+	"	.align 8\n"				\
+	"	.quad  " #_fault "," #_target "\n"	\
+	".previous\n"
+#endif
+
+#endif                                 /* __ASM_S390_PROCESSOR_H           */
diff --git a/arch/s390/include/asm/ptrace.h b/arch/s390/include/asm/ptrace.h
new file mode 100644
index 000000000000..af2c9ac28a07
--- /dev/null
+++ b/arch/s390/include/asm/ptrace.h
@@ -0,0 +1,499 @@
+/*
+ *  include/asm-s390/ptrace.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
+ */
+
+#ifndef _S390_PTRACE_H
+#define _S390_PTRACE_H
+
+/*
+ * Offsets in the user_regs_struct. They are used for the ptrace
+ * system call and in entry.S
+ */
+#ifndef __s390x__
+
+#define PT_PSWMASK  0x00
+#define PT_PSWADDR  0x04
+#define PT_GPR0     0x08
+#define PT_GPR1     0x0C
+#define PT_GPR2     0x10
+#define PT_GPR3     0x14
+#define PT_GPR4     0x18
+#define PT_GPR5     0x1C
+#define PT_GPR6     0x20
+#define PT_GPR7     0x24
+#define PT_GPR8     0x28
+#define PT_GPR9     0x2C
+#define PT_GPR10    0x30
+#define PT_GPR11    0x34
+#define PT_GPR12    0x38
+#define PT_GPR13    0x3C
+#define PT_GPR14    0x40
+#define PT_GPR15    0x44
+#define PT_ACR0     0x48
+#define PT_ACR1     0x4C
+#define PT_ACR2     0x50
+#define PT_ACR3     0x54
+#define PT_ACR4	    0x58
+#define PT_ACR5	    0x5C
+#define PT_ACR6	    0x60
+#define PT_ACR7	    0x64
+#define PT_ACR8	    0x68
+#define PT_ACR9	    0x6C
+#define PT_ACR10    0x70
+#define PT_ACR11    0x74
+#define PT_ACR12    0x78
+#define PT_ACR13    0x7C
+#define PT_ACR14    0x80
+#define PT_ACR15    0x84
+#define PT_ORIGGPR2 0x88
+#define PT_FPC	    0x90
+/*
+ * A nasty fact of life that the ptrace api
+ * only supports passing of longs.
+ */
+#define PT_FPR0_HI  0x98
+#define PT_FPR0_LO  0x9C
+#define PT_FPR1_HI  0xA0
+#define PT_FPR1_LO  0xA4
+#define PT_FPR2_HI  0xA8
+#define PT_FPR2_LO  0xAC
+#define PT_FPR3_HI  0xB0
+#define PT_FPR3_LO  0xB4
+#define PT_FPR4_HI  0xB8
+#define PT_FPR4_LO  0xBC
+#define PT_FPR5_HI  0xC0
+#define PT_FPR5_LO  0xC4
+#define PT_FPR6_HI  0xC8
+#define PT_FPR6_LO  0xCC
+#define PT_FPR7_HI  0xD0
+#define PT_FPR7_LO  0xD4
+#define PT_FPR8_HI  0xD8
+#define PT_FPR8_LO  0XDC
+#define PT_FPR9_HI  0xE0
+#define PT_FPR9_LO  0xE4
+#define PT_FPR10_HI 0xE8
+#define PT_FPR10_LO 0xEC
+#define PT_FPR11_HI 0xF0
+#define PT_FPR11_LO 0xF4
+#define PT_FPR12_HI 0xF8
+#define PT_FPR12_LO 0xFC
+#define PT_FPR13_HI 0x100
+#define PT_FPR13_LO 0x104
+#define PT_FPR14_HI 0x108
+#define PT_FPR14_LO 0x10C
+#define PT_FPR15_HI 0x110
+#define PT_FPR15_LO 0x114
+#define PT_CR_9	    0x118
+#define PT_CR_10    0x11C
+#define PT_CR_11    0x120
+#define PT_IEEE_IP  0x13C
+#define PT_LASTOFF  PT_IEEE_IP
+#define PT_ENDREGS  0x140-1
+
+#define GPR_SIZE	4
+#define CR_SIZE		4
+
+#define STACK_FRAME_OVERHEAD	96	/* size of minimum stack frame */
+
+#else /* __s390x__ */
+
+#define PT_PSWMASK  0x00
+#define PT_PSWADDR  0x08
+#define PT_GPR0     0x10
+#define PT_GPR1     0x18
+#define PT_GPR2     0x20
+#define PT_GPR3     0x28
+#define PT_GPR4     0x30
+#define PT_GPR5     0x38
+#define PT_GPR6     0x40
+#define PT_GPR7     0x48
+#define PT_GPR8     0x50
+#define PT_GPR9     0x58
+#define PT_GPR10    0x60
+#define PT_GPR11    0x68
+#define PT_GPR12    0x70
+#define PT_GPR13    0x78
+#define PT_GPR14    0x80
+#define PT_GPR15    0x88
+#define PT_ACR0     0x90
+#define PT_ACR1     0x94
+#define PT_ACR2     0x98
+#define PT_ACR3     0x9C
+#define PT_ACR4	    0xA0
+#define PT_ACR5	    0xA4
+#define PT_ACR6	    0xA8
+#define PT_ACR7	    0xAC
+#define PT_ACR8	    0xB0
+#define PT_ACR9	    0xB4
+#define PT_ACR10    0xB8
+#define PT_ACR11    0xBC
+#define PT_ACR12    0xC0
+#define PT_ACR13    0xC4
+#define PT_ACR14    0xC8
+#define PT_ACR15    0xCC
+#define PT_ORIGGPR2 0xD0
+#define PT_FPC	    0xD8
+#define PT_FPR0     0xE0
+#define PT_FPR1     0xE8
+#define PT_FPR2     0xF0
+#define PT_FPR3     0xF8
+#define PT_FPR4     0x100
+#define PT_FPR5     0x108
+#define PT_FPR6     0x110
+#define PT_FPR7     0x118
+#define PT_FPR8     0x120
+#define PT_FPR9     0x128
+#define PT_FPR10    0x130
+#define PT_FPR11    0x138
+#define PT_FPR12    0x140
+#define PT_FPR13    0x148
+#define PT_FPR14    0x150
+#define PT_FPR15    0x158
+#define PT_CR_9     0x160
+#define PT_CR_10    0x168
+#define PT_CR_11    0x170
+#define PT_IEEE_IP  0x1A8
+#define PT_LASTOFF  PT_IEEE_IP
+#define PT_ENDREGS  0x1B0-1
+
+#define GPR_SIZE	8
+#define CR_SIZE		8
+
+#define STACK_FRAME_OVERHEAD    160      /* size of minimum stack frame */
+
+#endif /* __s390x__ */
+
+#define NUM_GPRS	16
+#define NUM_FPRS	16
+#define NUM_CRS		16
+#define NUM_ACRS	16
+
+#define FPR_SIZE	8
+#define FPC_SIZE	4
+#define FPC_PAD_SIZE	4 /* gcc insists on aligning the fpregs */
+#define ACR_SIZE	4
+
+
+#define PTRACE_OLDSETOPTIONS         21
+
+#ifndef __ASSEMBLY__
+#include <linux/stddef.h>
+#include <linux/types.h>
+
+typedef union
+{
+	float   f;
+	double  d;
+        __u64   ui;
+	struct
+	{
+		__u32 hi;
+		__u32 lo;
+	} fp;
+} freg_t;
+
+typedef struct
+{
+	__u32   fpc;
+	freg_t  fprs[NUM_FPRS];              
+} s390_fp_regs;
+
+#define FPC_EXCEPTION_MASK      0xF8000000
+#define FPC_FLAGS_MASK          0x00F80000
+#define FPC_DXC_MASK            0x0000FF00
+#define FPC_RM_MASK             0x00000003
+#define FPC_VALID_MASK          0xF8F8FF03
+
+/* this typedef defines how a Program Status Word looks like */
+typedef struct 
+{
+        unsigned long mask;
+        unsigned long addr;
+} __attribute__ ((aligned(8))) psw_t;
+
+typedef struct
+{
+	__u32	mask;
+	__u32	addr;
+} __attribute__ ((aligned(8))) psw_compat_t;
+
+#ifndef __s390x__
+
+#define PSW_MASK_PER		0x40000000UL
+#define PSW_MASK_DAT		0x04000000UL
+#define PSW_MASK_IO		0x02000000UL
+#define PSW_MASK_EXT		0x01000000UL
+#define PSW_MASK_KEY		0x00F00000UL
+#define PSW_MASK_MCHECK		0x00040000UL
+#define PSW_MASK_WAIT		0x00020000UL
+#define PSW_MASK_PSTATE		0x00010000UL
+#define PSW_MASK_ASC		0x0000C000UL
+#define PSW_MASK_CC		0x00003000UL
+#define PSW_MASK_PM		0x00000F00UL
+
+#define PSW_ADDR_AMODE		0x80000000UL
+#define PSW_ADDR_INSN		0x7FFFFFFFUL
+
+#define PSW_BASE_BITS		0x00080000UL
+#define PSW_DEFAULT_KEY		(((unsigned long) PAGE_DEFAULT_ACC) << 20)
+
+#define PSW_ASC_PRIMARY		0x00000000UL
+#define PSW_ASC_ACCREG		0x00004000UL
+#define PSW_ASC_SECONDARY	0x00008000UL
+#define PSW_ASC_HOME		0x0000C000UL
+
+#else /* __s390x__ */
+
+#define PSW_MASK_PER		0x4000000000000000UL
+#define PSW_MASK_DAT		0x0400000000000000UL
+#define PSW_MASK_IO		0x0200000000000000UL
+#define PSW_MASK_EXT		0x0100000000000000UL
+#define PSW_MASK_KEY		0x00F0000000000000UL
+#define PSW_MASK_MCHECK		0x0004000000000000UL
+#define PSW_MASK_WAIT		0x0002000000000000UL
+#define PSW_MASK_PSTATE		0x0001000000000000UL
+#define PSW_MASK_ASC		0x0000C00000000000UL
+#define PSW_MASK_CC		0x0000300000000000UL
+#define PSW_MASK_PM		0x00000F0000000000UL
+
+#define PSW_ADDR_AMODE		0x0000000000000000UL
+#define PSW_ADDR_INSN		0xFFFFFFFFFFFFFFFFUL
+
+#define PSW_BASE_BITS		0x0000000180000000UL
+#define PSW_BASE32_BITS		0x0000000080000000UL
+#define PSW_DEFAULT_KEY		(((unsigned long) PAGE_DEFAULT_ACC) << 52)
+
+#define PSW_ASC_PRIMARY		0x0000000000000000UL
+#define PSW_ASC_ACCREG		0x0000400000000000UL
+#define PSW_ASC_SECONDARY	0x0000800000000000UL
+#define PSW_ASC_HOME		0x0000C00000000000UL
+
+extern long psw_user32_bits;
+
+#endif /* __s390x__ */
+
+extern long psw_kernel_bits;
+extern long psw_user_bits;
+
+/* This macro merges a NEW PSW mask specified by the user into
+   the currently active PSW mask CURRENT, modifying only those
+   bits in CURRENT that the user may be allowed to change: this
+   is the condition code and the program mask bits.  */
+#define PSW_MASK_MERGE(CURRENT,NEW) \
+	(((CURRENT) & ~(PSW_MASK_CC|PSW_MASK_PM)) | \
+	 ((NEW) & (PSW_MASK_CC|PSW_MASK_PM)))
+
+/*
+ * The s390_regs structure is used to define the elf_gregset_t.
+ */
+typedef struct
+{
+	psw_t psw;
+	unsigned long gprs[NUM_GPRS];
+	unsigned int  acrs[NUM_ACRS];
+	unsigned long orig_gpr2;
+} s390_regs;
+
+typedef struct
+{
+	psw_compat_t	psw;
+	__u32		gprs[NUM_GPRS];
+	__u32		acrs[NUM_ACRS];
+	__u32		orig_gpr2;
+} s390_compat_regs;
+
+
+#ifdef __KERNEL__
+#include <asm/setup.h>
+#include <asm/page.h>
+
+/*
+ * The pt_regs struct defines the way the registers are stored on
+ * the stack during a system call.
+ */
+struct pt_regs 
+{
+	unsigned long args[1];
+	psw_t psw;
+	unsigned long gprs[NUM_GPRS];
+	unsigned long orig_gpr2;
+	unsigned short ilc;
+	unsigned short trap;
+};
+#endif
+
+/*
+ * Now for the program event recording (trace) definitions.
+ */
+typedef struct
+{
+	unsigned long cr[3];
+} per_cr_words;
+
+#define PER_EM_MASK 0xE8000000UL
+
+typedef	struct
+{
+#ifdef __s390x__
+	unsigned                       : 32;
+#endif /* __s390x__ */
+	unsigned em_branching          : 1;
+	unsigned em_instruction_fetch  : 1;
+	/*
+	 * Switching on storage alteration automatically fixes
+	 * the storage alteration event bit in the users std.
+	 */
+	unsigned em_storage_alteration : 1;
+	unsigned em_gpr_alt_unused     : 1;
+	unsigned em_store_real_address : 1;
+	unsigned                       : 3;
+	unsigned branch_addr_ctl       : 1;
+	unsigned                       : 1;
+	unsigned storage_alt_space_ctl : 1;
+	unsigned                       : 21;
+	unsigned long starting_addr;
+	unsigned long ending_addr;
+} per_cr_bits;
+
+typedef struct
+{
+	unsigned short perc_atmid;
+	unsigned long address;
+	unsigned char access_id;
+} per_lowcore_words;
+
+typedef struct
+{
+	unsigned perc_branching          : 1;
+	unsigned perc_instruction_fetch  : 1;
+	unsigned perc_storage_alteration : 1;
+	unsigned perc_gpr_alt_unused     : 1;
+	unsigned perc_store_real_address : 1;
+	unsigned                         : 3;
+	unsigned atmid_psw_bit_31        : 1;
+	unsigned atmid_validity_bit      : 1;
+	unsigned atmid_psw_bit_32        : 1;
+	unsigned atmid_psw_bit_5         : 1;
+	unsigned atmid_psw_bit_16        : 1;
+	unsigned atmid_psw_bit_17        : 1;
+	unsigned si                      : 2;
+	unsigned long address;
+	unsigned                         : 4;
+	unsigned access_id               : 4;
+} per_lowcore_bits;
+
+typedef struct
+{
+	union {
+		per_cr_words   words;
+		per_cr_bits    bits;
+	} control_regs;
+	/*
+	 * Use these flags instead of setting em_instruction_fetch
+	 * directly they are used so that single stepping can be
+	 * switched on & off while not affecting other tracing
+	 */
+	unsigned  single_step       : 1;
+	unsigned  instruction_fetch : 1;
+	unsigned                    : 30;
+	/*
+	 * These addresses are copied into cr10 & cr11 if single
+	 * stepping is switched off
+	 */
+	unsigned long starting_addr;
+	unsigned long ending_addr;
+	union {
+		per_lowcore_words words;
+		per_lowcore_bits  bits;
+	} lowcore; 
+} per_struct;
+
+typedef struct
+{
+	unsigned int  len;
+	unsigned long kernel_addr;
+	unsigned long process_addr;
+} ptrace_area;
+
+/*
+ * S/390 specific non posix ptrace requests. I chose unusual values so
+ * they are unlikely to clash with future ptrace definitions.
+ */
+#define PTRACE_PEEKUSR_AREA           0x5000
+#define PTRACE_POKEUSR_AREA           0x5001
+#define PTRACE_PEEKTEXT_AREA	      0x5002
+#define PTRACE_PEEKDATA_AREA	      0x5003
+#define PTRACE_POKETEXT_AREA	      0x5004
+#define PTRACE_POKEDATA_AREA 	      0x5005
+
+/*
+ * PT_PROT definition is loosely based on hppa bsd definition in
+ * gdb/hppab-nat.c
+ */
+#define PTRACE_PROT                       21
+
+typedef enum
+{
+	ptprot_set_access_watchpoint,
+	ptprot_set_write_watchpoint,
+	ptprot_disable_watchpoint
+} ptprot_flags;
+
+typedef struct
+{
+	unsigned long lowaddr;
+	unsigned long hiaddr;
+	ptprot_flags prot;
+} ptprot_area;                     
+
+/* Sequence of bytes for breakpoint illegal instruction.  */
+#define S390_BREAKPOINT     {0x0,0x1}
+#define S390_BREAKPOINT_U16 ((__u16)0x0001)
+#define S390_SYSCALL_OPCODE ((__u16)0x0a00)
+#define S390_SYSCALL_SIZE   2
+
+/*
+ * The user_regs_struct defines the way the user registers are
+ * store on the stack for signal handling.
+ */
+struct user_regs_struct
+{
+	psw_t psw;
+	unsigned long gprs[NUM_GPRS];
+	unsigned int  acrs[NUM_ACRS];
+	unsigned long orig_gpr2;
+	s390_fp_regs fp_regs;
+	/*
+	 * These per registers are in here so that gdb can modify them
+	 * itself as there is no "official" ptrace interface for hardware
+	 * watchpoints. This is the way intel does it.
+	 */
+	per_struct per_info;
+	unsigned long ieee_instruction_pointer; 
+	/* Used to give failing instruction back to user for ieee exceptions */
+};
+
+#ifdef __KERNEL__
+/*
+ * These are defined as per linux/ptrace.h, which see.
+ */
+#define arch_has_single_step()	(1)
+struct task_struct;
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
+#define user_mode(regs) (((regs)->psw.mask & PSW_MASK_PSTATE) != 0)
+#define instruction_pointer(regs) ((regs)->psw.addr & PSW_ADDR_INSN)
+#define regs_return_value(regs)((regs)->gprs[2])
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs * regs);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+
+#endif /* _S390_PTRACE_H */
diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h
new file mode 100644
index 000000000000..6813772171f2
--- /dev/null
+++ b/arch/s390/include/asm/qdio.h
@@ -0,0 +1,382 @@
+/*
+ * linux/include/asm-s390/qdio.h
+ *
+ * Copyright 2000,2008 IBM Corp.
+ * Author(s): Utz Bacher <utz.bacher@de.ibm.com>
+ *	      Jan Glauber <jang@linux.vnet.ibm.com>
+ *
+ */
+#ifndef __QDIO_H__
+#define __QDIO_H__
+
+#include <linux/interrupt.h>
+#include <asm/cio.h>
+#include <asm/ccwdev.h>
+
+#define QDIO_MAX_QUEUES_PER_IRQ		32
+#define QDIO_MAX_BUFFERS_PER_Q		128
+#define QDIO_MAX_BUFFERS_MASK		(QDIO_MAX_BUFFERS_PER_Q - 1)
+#define QDIO_MAX_ELEMENTS_PER_BUFFER	16
+#define QDIO_SBAL_SIZE			256
+
+#define QDIO_QETH_QFMT			0
+#define QDIO_ZFCP_QFMT			1
+#define QDIO_IQDIO_QFMT			2
+
+/**
+ * struct qdesfmt0 - queue descriptor, format 0
+ * @sliba: storage list information block address
+ * @sla: storage list address
+ * @slsba: storage list state block address
+ * @akey: access key for DLIB
+ * @bkey: access key for SL
+ * @ckey: access key for SBALs
+ * @dkey: access key for SLSB
+ */
+struct qdesfmt0 {
+	u64 sliba;
+	u64 sla;
+	u64 slsba;
+	u32	 : 32;
+	u32 akey : 4;
+	u32 bkey : 4;
+	u32 ckey : 4;
+	u32 dkey : 4;
+	u32	 : 16;
+} __attribute__ ((packed));
+
+/**
+ * struct qdr - queue description record (QDR)
+ * @qfmt: queue format
+ * @pfmt: implementation dependent parameter format
+ * @ac: adapter characteristics
+ * @iqdcnt: input queue descriptor count
+ * @oqdcnt: output queue descriptor count
+ * @iqdsz: inpout queue descriptor size
+ * @oqdsz: output queue descriptor size
+ * @qiba: queue information block address
+ * @qkey: queue information block key
+ * @qdf0: queue descriptions
+ */
+struct qdr {
+	u32 qfmt   : 8;
+	u32 pfmt   : 8;
+	u32	   : 8;
+	u32 ac	   : 8;
+	u32	   : 8;
+	u32 iqdcnt : 8;
+	u32	   : 8;
+	u32 oqdcnt : 8;
+	u32	   : 8;
+	u32 iqdsz  : 8;
+	u32	   : 8;
+	u32 oqdsz  : 8;
+	/* private: */
+	u32 res[9];
+	/* public: */
+	u64 qiba;
+	u32	   : 32;
+	u32 qkey   : 4;
+	u32	   : 28;
+	struct qdesfmt0 qdf0[126];
+} __attribute__ ((packed, aligned(4096)));
+
+#define QIB_AC_OUTBOUND_PCI_SUPPORTED	0x40
+#define QIB_RFLAGS_ENABLE_QEBSM		0x80
+
+/**
+ * struct qib - queue information block (QIB)
+ * @qfmt: queue format
+ * @pfmt: implementation dependent parameter format
+ * @rflags: QEBSM
+ * @ac: adapter characteristics
+ * @isliba: absolute address of first input SLIB
+ * @osliba: absolute address of first output SLIB
+ * @ebcnam: adapter identifier in EBCDIC
+ * @parm: implementation dependent parameters
+ */
+struct qib {
+	u32 qfmt   : 8;
+	u32 pfmt   : 8;
+	u32 rflags : 8;
+	u32 ac	   : 8;
+	u32	   : 32;
+	u64 isliba;
+	u64 osliba;
+	u32	   : 32;
+	u32	   : 32;
+	u8 ebcnam[8];
+	/* private: */
+	u8 res[88];
+	/* public: */
+	u8 parm[QDIO_MAX_BUFFERS_PER_Q];
+} __attribute__ ((packed, aligned(256)));
+
+/**
+ * struct slibe - storage list information block element (SLIBE)
+ * @parms: implementation dependent parameters
+ */
+struct slibe {
+	u64 parms;
+};
+
+/**
+ * struct slib - storage list information block (SLIB)
+ * @nsliba: next SLIB address (if any)
+ * @sla: SL address
+ * @slsba: SLSB address
+ * @slibe: SLIB elements
+ */
+struct slib {
+	u64 nsliba;
+	u64 sla;
+	u64 slsba;
+	/* private: */
+	u8 res[1000];
+	/* public: */
+	struct slibe slibe[QDIO_MAX_BUFFERS_PER_Q];
+} __attribute__ ((packed, aligned(2048)));
+
+/**
+ * struct sbal_flags - storage block address list flags
+ * @last: last entry
+ * @cont: contiguous storage
+ * @frag: fragmentation
+ */
+struct sbal_flags {
+	u8	: 1;
+	u8 last : 1;
+	u8 cont : 1;
+	u8	: 1;
+	u8 frag : 2;
+	u8	: 2;
+} __attribute__ ((packed));
+
+#define SBAL_FLAGS_FIRST_FRAG		0x04000000UL
+#define SBAL_FLAGS_MIDDLE_FRAG		0x08000000UL
+#define SBAL_FLAGS_LAST_FRAG		0x0c000000UL
+#define SBAL_FLAGS_LAST_ENTRY		0x40000000UL
+#define SBAL_FLAGS_CONTIGUOUS		0x20000000UL
+
+#define SBAL_FLAGS0_DATA_CONTINUATION	0x20UL
+
+/* Awesome OpenFCP extensions */
+#define SBAL_FLAGS0_TYPE_STATUS		0x00UL
+#define SBAL_FLAGS0_TYPE_WRITE		0x08UL
+#define SBAL_FLAGS0_TYPE_READ		0x10UL
+#define SBAL_FLAGS0_TYPE_WRITE_READ	0x18UL
+#define SBAL_FLAGS0_MORE_SBALS		0x04UL
+#define SBAL_FLAGS0_COMMAND		0x02UL
+#define SBAL_FLAGS0_LAST_SBAL		0x00UL
+#define SBAL_FLAGS0_ONLY_SBAL		SBAL_FLAGS0_COMMAND
+#define SBAL_FLAGS0_MIDDLE_SBAL		SBAL_FLAGS0_MORE_SBALS
+#define SBAL_FLAGS0_FIRST_SBAL SBAL_FLAGS0_MORE_SBALS | SBAL_FLAGS0_COMMAND
+#define SBAL_FLAGS0_PCI			0x40
+
+/**
+ * struct sbal_sbalf_0 - sbal flags for sbale 0
+ * @pci: PCI indicator
+ * @cont: data continuation
+ * @sbtype: storage-block type (FCP)
+ */
+struct sbal_sbalf_0 {
+	u8	  : 1;
+	u8 pci	  : 1;
+	u8 cont   : 1;
+	u8 sbtype : 2;
+	u8	  : 3;
+} __attribute__ ((packed));
+
+/**
+ * struct sbal_sbalf_1 - sbal flags for sbale 1
+ * @key: storage key
+ */
+struct sbal_sbalf_1 {
+	u8     : 4;
+	u8 key : 4;
+} __attribute__ ((packed));
+
+/**
+ * struct sbal_sbalf_14 - sbal flags for sbale 14
+ * @erridx: error index
+ */
+struct sbal_sbalf_14 {
+	u8	  : 4;
+	u8 erridx : 4;
+} __attribute__ ((packed));
+
+/**
+ * struct sbal_sbalf_15 - sbal flags for sbale 15
+ * @reason: reason for error state
+ */
+struct sbal_sbalf_15 {
+	u8 reason;
+} __attribute__ ((packed));
+
+/**
+ * union sbal_sbalf - storage block address list flags
+ * @i0: sbalf0
+ * @i1: sbalf1
+ * @i14: sbalf14
+ * @i15: sblaf15
+ * @value: raw value
+ */
+union sbal_sbalf {
+	struct sbal_sbalf_0  i0;
+	struct sbal_sbalf_1  i1;
+	struct sbal_sbalf_14 i14;
+	struct sbal_sbalf_15 i15;
+	u8 value;
+};
+
+/**
+ * struct qdio_buffer_element - SBAL entry
+ * @flags: flags
+ * @length: length
+ * @addr: address
+*/
+struct qdio_buffer_element {
+	u32 flags;
+	u32 length;
+#ifdef CONFIG_32BIT
+	/* private: */
+	void *reserved;
+	/* public: */
+#endif
+	void *addr;
+} __attribute__ ((packed, aligned(16)));
+
+/**
+ * struct qdio_buffer - storage block address list (SBAL)
+ * @element: SBAL entries
+ */
+struct qdio_buffer {
+	struct qdio_buffer_element element[QDIO_MAX_ELEMENTS_PER_BUFFER];
+} __attribute__ ((packed, aligned(256)));
+
+/**
+ * struct sl_element - storage list entry
+ * @sbal: absolute SBAL address
+ */
+struct sl_element {
+#ifdef CONFIG_32BIT
+	/* private: */
+	unsigned long reserved;
+	/* public: */
+#endif
+	unsigned long sbal;
+} __attribute__ ((packed));
+
+/**
+ * struct sl - storage list (SL)
+ * @element: SL entries
+ */
+struct sl {
+	struct sl_element element[QDIO_MAX_BUFFERS_PER_Q];
+} __attribute__ ((packed, aligned(1024)));
+
+/**
+ * struct slsb - storage list state block (SLSB)
+ * @val: state per buffer
+ */
+struct slsb {
+	u8 val[QDIO_MAX_BUFFERS_PER_Q];
+} __attribute__ ((packed, aligned(256)));
+
+struct qdio_ssqd_desc {
+	u8 flags;
+	u8:8;
+	u16 sch;
+	u8 qfmt;
+	u8 parm;
+	u8 qdioac1;
+	u8 sch_class;
+	u8 pcnt;
+	u8 icnt;
+	u8:8;
+	u8 ocnt;
+	u8:8;
+	u8 mbccnt;
+	u16 qdioac2;
+	u64 sch_token;
+	u64:64;
+} __attribute__ ((packed));
+
+/* params are: ccw_device, qdio_error, queue_number,
+   first element processed, number of elements processed, int_parm */
+typedef void qdio_handler_t(struct ccw_device *, unsigned int, int,
+			    int, int, unsigned long);
+
+/* qdio errors reported to the upper-layer program */
+#define QDIO_ERROR_SIGA_ACCESS_EXCEPTION	0x10
+#define QDIO_ERROR_SIGA_BUSY			0x20
+#define QDIO_ERROR_ACTIVATE_CHECK_CONDITION	0x40
+#define QDIO_ERROR_SLSB_STATE			0x80
+
+/* for qdio_initialize */
+#define QDIO_INBOUND_0COPY_SBALS		0x01
+#define QDIO_OUTBOUND_0COPY_SBALS		0x02
+#define QDIO_USE_OUTBOUND_PCIS			0x04
+
+/* for qdio_cleanup */
+#define QDIO_FLAG_CLEANUP_USING_CLEAR		0x01
+#define QDIO_FLAG_CLEANUP_USING_HALT		0x02
+
+/**
+ * struct qdio_initialize - qdio initalization data
+ * @cdev: associated ccw device
+ * @q_format: queue format
+ * @adapter_name: name for the adapter
+ * @qib_param_field_format: format for qib_parm_field
+ * @qib_param_field: pointer to 128 bytes or NULL, if no param field
+ * @input_slib_elements: pointer to no_input_qs * 128 words of data or NULL
+ * @output_slib_elements: pointer to no_output_qs * 128 words of data or NULL
+ * @no_input_qs: number of input queues
+ * @no_output_qs: number of output queues
+ * @input_handler: handler to be called for input queues
+ * @output_handler: handler to be called for output queues
+ * @int_parm: interruption parameter
+ * @flags: initialization flags
+ * @input_sbal_addr_array:  address of no_input_qs * 128 pointers
+ * @output_sbal_addr_array: address of no_output_qs * 128 pointers
+ */
+struct qdio_initialize {
+	struct ccw_device *cdev;
+	unsigned char q_format;
+	unsigned char adapter_name[8];
+	unsigned int qib_param_field_format;
+	unsigned char *qib_param_field;
+	unsigned long *input_slib_elements;
+	unsigned long *output_slib_elements;
+	unsigned int no_input_qs;
+	unsigned int no_output_qs;
+	qdio_handler_t *input_handler;
+	qdio_handler_t *output_handler;
+	unsigned long int_parm;
+	unsigned long flags;
+	void **input_sbal_addr_array;
+	void **output_sbal_addr_array;
+};
+
+#define QDIO_STATE_INACTIVE		0x00000002 /* after qdio_cleanup */
+#define QDIO_STATE_ESTABLISHED		0x00000004 /* after qdio_establish */
+#define QDIO_STATE_ACTIVE		0x00000008 /* after qdio_activate */
+#define QDIO_STATE_STOPPED		0x00000010 /* after queues went down */
+
+#define QDIO_FLAG_SYNC_INPUT		0x01
+#define QDIO_FLAG_SYNC_OUTPUT		0x02
+#define QDIO_FLAG_PCI_OUT		0x10
+
+extern int qdio_initialize(struct qdio_initialize *init_data);
+extern int qdio_allocate(struct qdio_initialize *init_data);
+extern int qdio_establish(struct qdio_initialize *init_data);
+extern int qdio_activate(struct ccw_device *);
+
+extern int do_QDIO(struct ccw_device*, unsigned int flags,
+		   int q_nr, int qidx, int count);
+extern int qdio_cleanup(struct ccw_device*, int how);
+extern int qdio_shutdown(struct ccw_device*, int how);
+extern int qdio_free(struct ccw_device *);
+extern struct qdio_ssqd_desc *qdio_get_ssqd_desc(struct ccw_device *cdev);
+
+#endif /* __QDIO_H__ */
diff --git a/arch/s390/include/asm/qeth.h b/arch/s390/include/asm/qeth.h
new file mode 100644
index 000000000000..930d378ef75a
--- /dev/null
+++ b/arch/s390/include/asm/qeth.h
@@ -0,0 +1,78 @@
+/*
+ * include/asm-s390/qeth.h
+ *
+ * ioctl definitions for qeth driver
+ *
+ * Copyright (C) 2004 IBM Corporation
+ *
+ * Author(s):	Thomas Spatzier <tspat@de.ibm.com>
+ *
+ */
+#ifndef __ASM_S390_QETH_IOCTL_H__
+#define __ASM_S390_QETH_IOCTL_H__
+#include <linux/ioctl.h>
+
+#define SIOC_QETH_ARP_SET_NO_ENTRIES    (SIOCDEVPRIVATE)
+#define SIOC_QETH_ARP_QUERY_INFO        (SIOCDEVPRIVATE + 1)
+#define SIOC_QETH_ARP_ADD_ENTRY         (SIOCDEVPRIVATE + 2)
+#define SIOC_QETH_ARP_REMOVE_ENTRY      (SIOCDEVPRIVATE + 3)
+#define SIOC_QETH_ARP_FLUSH_CACHE       (SIOCDEVPRIVATE + 4)
+#define SIOC_QETH_ADP_SET_SNMP_CONTROL  (SIOCDEVPRIVATE + 5)
+#define SIOC_QETH_GET_CARD_TYPE         (SIOCDEVPRIVATE + 6)
+
+struct qeth_arp_cache_entry {
+	__u8  macaddr[6];
+	__u8  reserved1[2];
+	__u8  ipaddr[16]; /* for both  IPv4 and IPv6 */
+	__u8  reserved2[32];
+} __attribute__ ((packed));
+
+struct qeth_arp_qi_entry7 {
+	__u8 media_specific[32];
+	__u8 macaddr_type;
+	__u8 ipaddr_type;
+	__u8 macaddr[6];
+	__u8 ipaddr[4];
+} __attribute__((packed));
+
+struct qeth_arp_qi_entry7_short {
+	__u8 macaddr_type;
+	__u8 ipaddr_type;
+	__u8 macaddr[6];
+	__u8 ipaddr[4];
+} __attribute__((packed));
+
+struct qeth_arp_qi_entry5 {
+	__u8 media_specific[32];
+	__u8 macaddr_type;
+	__u8 ipaddr_type;
+	__u8 ipaddr[4];
+} __attribute__((packed));
+
+struct qeth_arp_qi_entry5_short {
+	__u8 macaddr_type;
+	__u8 ipaddr_type;
+	__u8 ipaddr[4];
+} __attribute__((packed));
+
+/*
+ * can be set by user if no "media specific information" is wanted
+ * -> saves a lot of space in user space buffer
+ */
+#define QETH_QARP_STRIP_ENTRIES  0x8000
+#define QETH_QARP_REQUEST_MASK   0x00ff
+
+/* data sent to user space as result of query arp ioctl */
+#define QETH_QARP_USER_DATA_SIZE 20000
+#define QETH_QARP_MASK_OFFSET    4
+#define QETH_QARP_ENTRIES_OFFSET 6
+struct qeth_arp_query_user_data {
+	union {
+		__u32 data_len;		/* set by user space program */
+		__u32 no_entries;	/* set by kernel */
+	} u;
+	__u16 mask_bits;
+	char *entries;
+} __attribute__((packed));
+
+#endif /* __ASM_S390_QETH_IOCTL_H__ */
diff --git a/arch/s390/include/asm/reset.h b/arch/s390/include/asm/reset.h
new file mode 100644
index 000000000000..f584f4a52581
--- /dev/null
+++ b/arch/s390/include/asm/reset.h
@@ -0,0 +1,21 @@
+/*
+ *  include/asm-s390/reset.h
+ *
+ *    Copyright IBM Corp. 2006
+ *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_RESET_H
+#define _ASM_S390_RESET_H
+
+#include <linux/list.h>
+
+struct reset_call {
+	struct list_head list;
+	void (*fn)(void);
+};
+
+extern void register_reset_call(struct reset_call *reset);
+extern void unregister_reset_call(struct reset_call *reset);
+extern void s390_reset_system(void);
+#endif /* _ASM_S390_RESET_H */
diff --git a/arch/s390/include/asm/resource.h b/arch/s390/include/asm/resource.h
new file mode 100644
index 000000000000..366c01de04f2
--- /dev/null
+++ b/arch/s390/include/asm/resource.h
@@ -0,0 +1,15 @@
+/*
+ *  include/asm-s390/resource.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/resources.h"
+ */
+
+#ifndef _S390_RESOURCE_H
+#define _S390_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif
+
diff --git a/arch/s390/include/asm/rwsem.h b/arch/s390/include/asm/rwsem.h
new file mode 100644
index 000000000000..9d2a17971805
--- /dev/null
+++ b/arch/s390/include/asm/rwsem.h
@@ -0,0 +1,387 @@
+#ifndef _S390_RWSEM_H
+#define _S390_RWSEM_H
+
+/*
+ *  include/asm-s390/rwsem.h
+ *
+ *  S390 version
+ *    Copyright (C) 2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Based on asm-alpha/semaphore.h and asm-i386/rwsem.h
+ */
+
+/*
+ *
+ * The MSW of the count is the negated number of active writers and waiting
+ * lockers, and the LSW is the total number of active locks
+ *
+ * The lock count is initialized to 0 (no active and no waiting lockers).
+ *
+ * When a writer subtracts WRITE_BIAS, it'll get 0xffff0001 for the case of an
+ * uncontended lock. This can be determined because XADD returns the old value.
+ * Readers increment by 1 and see a positive value when uncontended, negative
+ * if there are writers (and maybe) readers waiting (in which case it goes to
+ * sleep).
+ *
+ * The value of WAITING_BIAS supports up to 32766 waiting processes. This can
+ * be extended to 65534 by manually checking the whole MSW rather than relying
+ * on the S flag.
+ *
+ * The value of ACTIVE_BIAS supports up to 65535 active processes.
+ *
+ * This should be totally fair - if anything is waiting, a process that wants a
+ * lock will go to the back of the queue. When the currently active lock is
+ * released, if there's a writer at the front of the queue, then that and only
+ * that will be woken up; if there's a bunch of consequtive readers at the
+ * front, then they'll all be woken up, but no other readers will be.
+ */
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+
+struct rwsem_waiter;
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *);
+extern struct rw_semaphore *rwsem_downgrade_write(struct rw_semaphore *);
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	signed long		count;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	dep_map;
+#endif
+};
+
+#ifndef __s390x__
+#define RWSEM_UNLOCKED_VALUE	0x00000000
+#define RWSEM_ACTIVE_BIAS	0x00000001
+#define RWSEM_ACTIVE_MASK	0x0000ffff
+#define RWSEM_WAITING_BIAS	(-0x00010000)
+#else /* __s390x__ */
+#define RWSEM_UNLOCKED_VALUE	0x0000000000000000L
+#define RWSEM_ACTIVE_BIAS	0x0000000000000001L
+#define RWSEM_ACTIVE_MASK	0x00000000ffffffffL
+#define RWSEM_WAITING_BIAS	(-0x0000000100000000L)
+#endif /* __s390x__ */
+#define RWSEM_ACTIVE_READ_BIAS	RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS	(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+/*
+ * initialisation
+ */
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+ { RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait.lock), \
+   LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+static inline void init_rwsem(struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+}
+
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+			 struct lock_class_key *key);
+
+#define init_rwsem(sem)				\
+do {						\
+	static struct lock_class_key __key;	\
+						\
+	__init_rwsem((sem), #sem, &__key);	\
+} while (0)
+
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	signed long old, new;
+
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%3)\n"
+		"0:	lr	%1,%0\n"
+		"	ahi	%1,%5\n"
+		"	cs	%0,%1,0(%3)\n"
+		"	jl	0b"
+#else /* __s390x__ */
+		"	lg	%0,0(%3)\n"
+		"0:	lgr	%1,%0\n"
+		"	aghi	%1,%5\n"
+		"	csg	%0,%1,0(%3)\n"
+		"	jl	0b"
+#endif /* __s390x__ */
+		: "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count),
+		  "i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory");
+	if (old < 0)
+		rwsem_down_read_failed(sem);
+}
+
+/*
+ * trylock for reading -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	signed long old, new;
+
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%3)\n"
+		"0:	ltr	%1,%0\n"
+		"	jm	1f\n"
+		"	ahi	%1,%5\n"
+		"	cs	%0,%1,0(%3)\n"
+		"	jl	0b\n"
+		"1:"
+#else /* __s390x__ */
+		"	lg	%0,0(%3)\n"
+		"0:	ltgr	%1,%0\n"
+		"	jm	1f\n"
+		"	aghi	%1,%5\n"
+		"	csg	%0,%1,0(%3)\n"
+		"	jl	0b\n"
+		"1:"
+#endif /* __s390x__ */
+		: "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count),
+		  "i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory");
+	return old >= 0 ? 1 : 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+	signed long old, new, tmp;
+
+	tmp = RWSEM_ACTIVE_WRITE_BIAS;
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%3)\n"
+		"0:	lr	%1,%0\n"
+		"	a	%1,%5\n"
+		"	cs	%0,%1,0(%3)\n"
+		"	jl	0b"
+#else /* __s390x__ */
+		"	lg	%0,0(%3)\n"
+		"0:	lgr	%1,%0\n"
+		"	ag	%1,%5\n"
+		"	csg	%0,%1,0(%3)\n"
+		"	jl	0b"
+#endif /* __s390x__ */
+		: "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count), "m" (tmp)
+		: "cc", "memory");
+	if (old != 0)
+		rwsem_down_write_failed(sem);
+}
+
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	__down_write_nested(sem, 0);
+}
+
+/*
+ * trylock for writing -- returns 1 if successful, 0 if contention
+ */
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	signed long old;
+
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%2)\n"
+		"0:	ltr	%0,%0\n"
+		"	jnz	1f\n"
+		"	cs	%0,%4,0(%2)\n"
+		"	jl	0b\n"
+#else /* __s390x__ */
+		"	lg	%0,0(%2)\n"
+		"0:	ltgr	%0,%0\n"
+		"	jnz	1f\n"
+		"	csg	%0,%4,0(%2)\n"
+		"	jl	0b\n"
+#endif /* __s390x__ */
+		"1:"
+		: "=&d" (old), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count),
+		  "d" (RWSEM_ACTIVE_WRITE_BIAS) : "cc", "memory");
+	return (old == RWSEM_UNLOCKED_VALUE) ? 1 : 0;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	signed long old, new;
+
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%3)\n"
+		"0:	lr	%1,%0\n"
+		"	ahi	%1,%5\n"
+		"	cs	%0,%1,0(%3)\n"
+		"	jl	0b"
+#else /* __s390x__ */
+		"	lg	%0,0(%3)\n"
+		"0:	lgr	%1,%0\n"
+		"	aghi	%1,%5\n"
+		"	csg	%0,%1,0(%3)\n"
+		"	jl	0b"
+#endif /* __s390x__ */
+		: "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count),
+		  "i" (-RWSEM_ACTIVE_READ_BIAS)
+		: "cc", "memory");
+	if (new < 0)
+		if ((new & RWSEM_ACTIVE_MASK) == 0)
+			rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	signed long old, new, tmp;
+
+	tmp = -RWSEM_ACTIVE_WRITE_BIAS;
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%3)\n"
+		"0:	lr	%1,%0\n"
+		"	a	%1,%5\n"
+		"	cs	%0,%1,0(%3)\n"
+		"	jl	0b"
+#else /* __s390x__ */
+		"	lg	%0,0(%3)\n"
+		"0:	lgr	%1,%0\n"
+		"	ag	%1,%5\n"
+		"	csg	%0,%1,0(%3)\n"
+		"	jl	0b"
+#endif /* __s390x__ */
+		: "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count), "m" (tmp)
+		: "cc", "memory");
+	if (new < 0)
+		if ((new & RWSEM_ACTIVE_MASK) == 0)
+			rwsem_wake(sem);
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	signed long old, new, tmp;
+
+	tmp = -RWSEM_WAITING_BIAS;
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%3)\n"
+		"0:	lr	%1,%0\n"
+		"	a	%1,%5\n"
+		"	cs	%0,%1,0(%3)\n"
+		"	jl	0b"
+#else /* __s390x__ */
+		"	lg	%0,0(%3)\n"
+		"0:	lgr	%1,%0\n"
+		"	ag	%1,%5\n"
+		"	csg	%0,%1,0(%3)\n"
+		"	jl	0b"
+#endif /* __s390x__ */
+		: "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count), "m" (tmp)
+		: "cc", "memory");
+	if (new > 1)
+		rwsem_downgrade_wake(sem);
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(long delta, struct rw_semaphore *sem)
+{
+	signed long old, new;
+
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%3)\n"
+		"0:	lr	%1,%0\n"
+		"	ar	%1,%5\n"
+		"	cs	%0,%1,0(%3)\n"
+		"	jl	0b"
+#else /* __s390x__ */
+		"	lg	%0,0(%3)\n"
+		"0:	lgr	%1,%0\n"
+		"	agr	%1,%5\n"
+		"	csg	%0,%1,0(%3)\n"
+		"	jl	0b"
+#endif /* __s390x__ */
+		: "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count), "d" (delta)
+		: "cc", "memory");
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem)
+{
+	signed long old, new;
+
+	asm volatile(
+#ifndef __s390x__
+		"	l	%0,0(%3)\n"
+		"0:	lr	%1,%0\n"
+		"	ar	%1,%5\n"
+		"	cs	%0,%1,0(%3)\n"
+		"	jl	0b"
+#else /* __s390x__ */
+		"	lg	%0,0(%3)\n"
+		"0:	lgr	%1,%0\n"
+		"	agr	%1,%5\n"
+		"	csg	%0,%1,0(%3)\n"
+		"	jl	0b"
+#endif /* __s390x__ */
+		: "=&d" (old), "=&d" (new), "=m" (sem->count)
+		: "a" (&sem->count), "m" (sem->count), "d" (delta)
+		: "cc", "memory");
+	return new;
+}
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _S390_RWSEM_H */
diff --git a/arch/s390/include/asm/s390_ext.h b/arch/s390/include/asm/s390_ext.h
new file mode 100644
index 000000000000..2afc060266a2
--- /dev/null
+++ b/arch/s390/include/asm/s390_ext.h
@@ -0,0 +1,32 @@
+#ifndef _S390_EXTINT_H
+#define _S390_EXTINT_H
+
+/*
+ *  include/asm-s390/s390_ext.h
+ *
+ *  S390 version
+ *    Copyright IBM Corp. 1999,2007
+ *    Author(s): Holger Smolinski (Holger.Smolinski@de.ibm.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ */
+
+#include <linux/types.h>
+
+typedef void (*ext_int_handler_t)(__u16 code);
+
+typedef struct ext_int_info_t {
+	struct ext_int_info_t *next;
+	ext_int_handler_t handler;
+	__u16 code;
+} ext_int_info_t;
+
+extern ext_int_info_t *ext_int_hash[];
+
+int register_external_interrupt(__u16 code, ext_int_handler_t handler);
+int register_early_external_interrupt(__u16 code, ext_int_handler_t handler,
+				      ext_int_info_t *info);
+int unregister_external_interrupt(__u16 code, ext_int_handler_t handler);
+int unregister_early_external_interrupt(__u16 code, ext_int_handler_t handler,
+					ext_int_info_t *info);
+
+#endif
diff --git a/arch/s390/include/asm/s390_rdev.h b/arch/s390/include/asm/s390_rdev.h
new file mode 100644
index 000000000000..6fa20442a48c
--- /dev/null
+++ b/arch/s390/include/asm/s390_rdev.h
@@ -0,0 +1,15 @@
+/*
+ *  include/asm-s390/ccwdev.h
+ *
+ *    Copyright (C) 2002,2005 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
+ *               Carsten Otte  <cotte@de.ibm.com>
+ *
+ *  Interface for s390 root device
+ */
+
+#ifndef _S390_RDEV_H_
+#define _S390_RDEV_H_
+extern struct device *s390_root_dev_register(const char *);
+extern void s390_root_dev_unregister(struct device *);
+#endif /* _S390_RDEV_H_ */
diff --git a/arch/s390/include/asm/scatterlist.h b/arch/s390/include/asm/scatterlist.h
new file mode 100644
index 000000000000..29ec8e28c8df
--- /dev/null
+++ b/arch/s390/include/asm/scatterlist.h
@@ -0,0 +1,19 @@
+#ifndef _ASMS390_SCATTERLIST_H
+#define _ASMS390_SCATTERLIST_H
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+    unsigned long sg_magic;
+#endif
+    unsigned long page_link;
+    unsigned int offset;
+    unsigned int length;
+};
+
+#ifdef __s390x__
+#define ISA_DMA_THRESHOLD (0xffffffffffffffffUL)
+#else
+#define ISA_DMA_THRESHOLD (0xffffffffUL)
+#endif
+
+#endif /* _ASMS390X_SCATTERLIST_H */
diff --git a/arch/s390/include/asm/schid.h b/arch/s390/include/asm/schid.h
new file mode 100644
index 000000000000..825503cf3dc2
--- /dev/null
+++ b/arch/s390/include/asm/schid.h
@@ -0,0 +1,32 @@
+#ifndef ASM_SCHID_H
+#define ASM_SCHID_H
+
+struct subchannel_id {
+	__u32 cssid : 8;
+	__u32 : 4;
+	__u32 m : 1;
+	__u32 ssid : 2;
+	__u32 one : 1;
+	__u32 sch_no : 16;
+} __attribute__ ((packed, aligned(4)));
+
+#ifdef __KERNEL__
+#include <linux/string.h>
+
+/* Helper function for sane state of pre-allocated subchannel_id. */
+static inline void
+init_subchannel_id(struct subchannel_id *schid)
+{
+	memset(schid, 0, sizeof(struct subchannel_id));
+	schid->one = 1;
+}
+
+static inline int
+schid_equal(struct subchannel_id *schid1, struct subchannel_id *schid2)
+{
+	return !memcmp(schid1, schid2, sizeof(struct subchannel_id));
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* ASM_SCHID_H */
diff --git a/arch/s390/include/asm/sclp.h b/arch/s390/include/asm/sclp.h
new file mode 100644
index 000000000000..fed7bee650a0
--- /dev/null
+++ b/arch/s390/include/asm/sclp.h
@@ -0,0 +1,58 @@
+/*
+ *  include/asm-s390/sclp.h
+ *
+ *    Copyright IBM Corp. 2007
+ *    Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_SCLP_H
+#define _ASM_S390_SCLP_H
+
+#include <linux/types.h>
+#include <asm/chpid.h>
+
+#define SCLP_CHP_INFO_MASK_SIZE		32
+
+struct sclp_chp_info {
+	u8 recognized[SCLP_CHP_INFO_MASK_SIZE];
+	u8 standby[SCLP_CHP_INFO_MASK_SIZE];
+	u8 configured[SCLP_CHP_INFO_MASK_SIZE];
+};
+
+#define LOADPARM_LEN 8
+
+struct sclp_ipl_info {
+	int is_valid;
+	int has_dump;
+	char loadparm[LOADPARM_LEN];
+};
+
+struct sclp_cpu_entry {
+	u8 address;
+	u8 reserved0[13];
+	u8 type;
+	u8 reserved1;
+} __attribute__((packed));
+
+struct sclp_cpu_info {
+	unsigned int configured;
+	unsigned int standby;
+	unsigned int combined;
+	int has_cpu_type;
+	struct sclp_cpu_entry cpu[255];
+};
+
+int sclp_get_cpu_info(struct sclp_cpu_info *info);
+int sclp_cpu_configure(u8 cpu);
+int sclp_cpu_deconfigure(u8 cpu);
+void sclp_facilities_detect(void);
+unsigned long long sclp_get_rnmax(void);
+unsigned long long sclp_get_rzm(void);
+int sclp_sdias_blk_count(void);
+int sclp_sdias_copy(void *dest, int blk_num, int nr_blks);
+int sclp_chp_configure(struct chp_id chpid);
+int sclp_chp_deconfigure(struct chp_id chpid);
+int sclp_chp_read_info(struct sclp_chp_info *info);
+void sclp_get_ipl_info(struct sclp_ipl_info *info);
+
+#endif /* _ASM_S390_SCLP_H */
diff --git a/arch/s390/include/asm/sections.h b/arch/s390/include/asm/sections.h
new file mode 100644
index 000000000000..fbd9116eb17b
--- /dev/null
+++ b/arch/s390/include/asm/sections.h
@@ -0,0 +1,8 @@
+#ifndef _S390_SECTIONS_H
+#define _S390_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+extern char _eshared[], _ehead[];
+
+#endif
diff --git a/arch/s390/include/asm/segment.h b/arch/s390/include/asm/segment.h
new file mode 100644
index 000000000000..8bfce3475b1c
--- /dev/null
+++ b/arch/s390/include/asm/segment.h
@@ -0,0 +1,4 @@
+#ifndef _ASM_SEGMENT_H
+#define _ASM_SEGMENT_H
+
+#endif
diff --git a/arch/s390/include/asm/sembuf.h b/arch/s390/include/asm/sembuf.h
new file mode 100644
index 000000000000..32626b0cac4b
--- /dev/null
+++ b/arch/s390/include/asm/sembuf.h
@@ -0,0 +1,29 @@
+#ifndef _S390_SEMBUF_H
+#define _S390_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for S/390 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem (for !__s390x__)
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+#ifndef __s390x__
+	unsigned long	__unused1;
+#endif /* ! __s390x__ */
+	__kernel_time_t	sem_ctime;		/* last change time */
+#ifndef __s390x__
+	unsigned long	__unused2;
+#endif /* ! __s390x__ */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _S390_SEMBUF_H */
diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h
new file mode 100644
index 000000000000..2bd9faeb3919
--- /dev/null
+++ b/arch/s390/include/asm/setup.h
@@ -0,0 +1,140 @@
+/*
+ *  include/asm-s390/setup.h
+ *
+ *  S390 version
+ *    Copyright IBM Corp. 1999,2006
+ */
+
+#ifndef _ASM_S390_SETUP_H
+#define _ASM_S390_SETUP_H
+
+#define COMMAND_LINE_SIZE	1024
+
+#define ARCH_COMMAND_LINE_SIZE	896
+
+#ifdef __KERNEL__
+
+#include <asm/types.h>
+
+#define PARMAREA		0x10400
+#define MEMORY_CHUNKS		256
+
+#ifndef __ASSEMBLY__
+
+#ifndef __s390x__
+#define IPL_DEVICE        (*(unsigned long *)  (0x10404))
+#define INITRD_START      (*(unsigned long *)  (0x1040C))
+#define INITRD_SIZE       (*(unsigned long *)  (0x10414))
+#else /* __s390x__ */
+#define IPL_DEVICE        (*(unsigned long *)  (0x10400))
+#define INITRD_START      (*(unsigned long *)  (0x10408))
+#define INITRD_SIZE       (*(unsigned long *)  (0x10410))
+#endif /* __s390x__ */
+#define COMMAND_LINE      ((char *)            (0x10480))
+
+#define CHUNK_READ_WRITE 0
+#define CHUNK_READ_ONLY  1
+
+struct mem_chunk {
+	unsigned long addr;
+	unsigned long size;
+	int type;
+};
+
+extern struct mem_chunk memory_chunk[];
+extern unsigned long real_memory_size;
+
+void detect_memory_layout(struct mem_chunk chunk[]);
+
+#ifdef CONFIG_S390_SWITCH_AMODE
+extern unsigned int switch_amode;
+#else
+#define switch_amode	(0)
+#endif
+
+#ifdef CONFIG_S390_EXEC_PROTECT
+extern unsigned int s390_noexec;
+#else
+#define s390_noexec	(0)
+#endif
+
+/*
+ * Machine features detected in head.S
+ */
+extern unsigned long machine_flags;
+
+#define MACHINE_FLAG_VM		(1UL << 0)
+#define MACHINE_FLAG_IEEE	(1UL << 1)
+#define MACHINE_FLAG_CSP	(1UL << 3)
+#define MACHINE_FLAG_MVPG	(1UL << 4)
+#define MACHINE_FLAG_DIAG44	(1UL << 5)
+#define MACHINE_FLAG_IDTE	(1UL << 6)
+#define MACHINE_FLAG_DIAG9C	(1UL << 7)
+#define MACHINE_FLAG_MVCOS	(1UL << 8)
+#define MACHINE_FLAG_KVM	(1UL << 9)
+#define MACHINE_FLAG_HPAGE	(1UL << 10)
+#define MACHINE_FLAG_PFMF	(1UL << 11)
+
+#define MACHINE_IS_VM		(machine_flags & MACHINE_FLAG_VM)
+#define MACHINE_IS_KVM		(machine_flags & MACHINE_FLAG_KVM)
+#define MACHINE_HAS_DIAG9C	(machine_flags & MACHINE_FLAG_DIAG9C)
+
+#ifndef __s390x__
+#define MACHINE_HAS_IEEE	(machine_flags & MACHINE_FLAG_IEEE)
+#define MACHINE_HAS_CSP		(machine_flags & MACHINE_FLAG_CSP)
+#define MACHINE_HAS_IDTE	(0)
+#define MACHINE_HAS_DIAG44	(1)
+#define MACHINE_HAS_MVPG	(machine_flags & MACHINE_FLAG_MVPG)
+#define MACHINE_HAS_MVCOS	(0)
+#define MACHINE_HAS_HPAGE	(0)
+#define MACHINE_HAS_PFMF	(0)
+#else /* __s390x__ */
+#define MACHINE_HAS_IEEE	(1)
+#define MACHINE_HAS_CSP		(1)
+#define MACHINE_HAS_IDTE	(machine_flags & MACHINE_FLAG_IDTE)
+#define MACHINE_HAS_DIAG44	(machine_flags & MACHINE_FLAG_DIAG44)
+#define MACHINE_HAS_MVPG	(1)
+#define MACHINE_HAS_MVCOS	(machine_flags & MACHINE_FLAG_MVCOS)
+#define MACHINE_HAS_HPAGE	(machine_flags & MACHINE_FLAG_HPAGE)
+#define MACHINE_HAS_PFMF	(machine_flags & MACHINE_FLAG_PFMF)
+#endif /* __s390x__ */
+
+#define ZFCPDUMP_HSA_SIZE	(32UL<<20)
+
+/*
+ * Console mode. Override with conmode=
+ */
+extern unsigned int console_mode;
+extern unsigned int console_devno;
+extern unsigned int console_irq;
+
+extern char vmhalt_cmd[];
+extern char vmpoff_cmd[];
+
+#define CONSOLE_IS_UNDEFINED	(console_mode == 0)
+#define CONSOLE_IS_SCLP		(console_mode == 1)
+#define CONSOLE_IS_3215		(console_mode == 2)
+#define CONSOLE_IS_3270		(console_mode == 3)
+#define SET_CONSOLE_SCLP	do { console_mode = 1; } while (0)
+#define SET_CONSOLE_3215	do { console_mode = 2; } while (0)
+#define SET_CONSOLE_3270	do { console_mode = 3; } while (0)
+
+#define NSS_NAME_SIZE	8
+extern char kernel_nss_name[];
+
+#else /* __ASSEMBLY__ */
+
+#ifndef __s390x__
+#define IPL_DEVICE        0x10404
+#define INITRD_START      0x1040C
+#define INITRD_SIZE       0x10414
+#else /* __s390x__ */
+#define IPL_DEVICE        0x10400
+#define INITRD_START      0x10408
+#define INITRD_SIZE       0x10410
+#endif /* __s390x__ */
+#define COMMAND_LINE      0x10480
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* _ASM_S390_SETUP_H */
diff --git a/arch/s390/include/asm/sfp-machine.h b/arch/s390/include/asm/sfp-machine.h
new file mode 100644
index 000000000000..4e16aede4b06
--- /dev/null
+++ b/arch/s390/include/asm/sfp-machine.h
@@ -0,0 +1,142 @@
+/* Machine-dependent software floating-point definitions.
+   S/390 kernel version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+   
+
+#define _FP_W_TYPE_SIZE		32
+#define _FP_W_TYPE		unsigned int
+#define _FP_WS_TYPE		signed int
+#define _FP_I_TYPE		int
+
+#define _FP_MUL_MEAT_S(R,X,Y)					\
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_D(R,X,Y)					\
+  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)					\
+  _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_udiv(S,R,X,Y)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_2_udiv(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_4_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1), -1
+#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
+#define _FP_NANSIGN_S		0
+#define _FP_NANSIGN_D		0
+#define _FP_NANSIGN_Q		0
+
+#define _FP_KEEPNANFRACP 1
+
+/*
+ * If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)                      \
+  do {                                                          \
+    if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs)          \
+        && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs))     \
+      {                                                         \
+        R##_s = Y##_s;                                          \
+        _FP_FRAC_COPY_##wc(R,Y);                                \
+      }                                                         \
+    else                                                        \
+      {                                                         \
+        R##_s = X##_s;                                          \
+        _FP_FRAC_COPY_##wc(R,X);                                \
+      }                                                         \
+    R##_c = FP_CLS_NAN;                                         \
+  } while (0)
+
+/* Some assembly to speed things up. */
+#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) ({		\
+	unsigned int __r2 = (x2) + (y2);			\
+	unsigned int __r1 = (x1);				\
+	unsigned int __r0 = (x0);				\
+	asm volatile(						\
+		"	alr	%2,%3\n"			\
+		"	brc	12,0f\n"			\
+		"	lhi	0,1\n"				\
+		"	alr	%1,0\n"				\
+		"	brc	12,0f\n"			\
+		"	alr	%0,0\n"				\
+		"0:"						\
+		: "+&d" (__r2), "+&d" (__r1), "+&d" (__r0)	\
+		: "d" (y0), "i" (1) : "cc", "0" );		\
+	asm volatile(						\
+		"	alr	%1,%2\n"			\
+		"	brc	12,0f\n"			\
+		"	ahi	%0,1\n"				\
+		"0:"						\
+		: "+&d" (__r2), "+&d" (__r1)			\
+		: "d" (y1) : "cc");				\
+	(r2) = __r2;						\
+	(r1) = __r1;						\
+	(r0) = __r0;						\
+})
+
+#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0) ({		\
+	unsigned int __r2 = (x2) - (y2);			\
+	unsigned int __r1 = (x1);				\
+	unsigned int __r0 = (x0);				\
+	asm volatile(						\
+		"	slr   %2,%3\n"				\
+		"	brc	3,0f\n"				\
+		"	lhi	0,1\n"				\
+		"	slr	%1,0\n"				\
+		"	brc	3,0f\n"				\
+		"	slr	%0,0\n"				\
+		"0:"						\
+		: "+&d" (__r2), "+&d" (__r1), "+&d" (__r0)	\
+		: "d" (y0) : "cc", "0");			\
+	asm volatile(						\
+		"	slr	%1,%2\n"			\
+		"	brc	3,0f\n"				\
+		"	ahi	%0,-1\n"			\
+		"0:"						\
+		: "+&d" (__r2), "+&d" (__r1)			\
+		: "d" (y1) : "cc");				\
+	(r2) = __r2;						\
+	(r1) = __r1;						\
+	(r0) = __r0;						\
+})
+
+#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0) __FP_FRAC_SUB_3(x2,x1,x0,x2,x1,x0,y2,y1,y0)
+
+/* Obtain the current rounding mode. */
+#define FP_ROUNDMODE	mode
+
+/* Exception flags. */
+#define FP_EX_INVALID		0x800000
+#define FP_EX_DIVZERO		0x400000
+#define FP_EX_OVERFLOW		0x200000
+#define FP_EX_UNDERFLOW		0x100000
+#define FP_EX_INEXACT		0x080000
+
+/* We write the results always */
+#define FP_INHIBIT_RESULTS 0
+
+#endif
diff --git a/arch/s390/include/asm/sfp-util.h b/arch/s390/include/asm/sfp-util.h
new file mode 100644
index 000000000000..0addc6466d95
--- /dev/null
+++ b/arch/s390/include/asm/sfp-util.h
@@ -0,0 +1,77 @@
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) ({		\
+	unsigned int __sh = (ah);			\
+	unsigned int __sl = (al);			\
+	asm volatile(					\
+		"	alr	%1,%3\n"		\
+		"	brc	12,0f\n"		\
+		"	ahi	%0,1\n"			\
+		"0:	alr  %0,%2"			\
+		: "+&d" (__sh), "+d" (__sl)		\
+		: "d" (bh), "d" (bl) : "cc");		\
+	(sh) = __sh;					\
+	(sl) = __sl;					\
+})
+
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) ({		\
+	unsigned int __sh = (ah);			\
+	unsigned int __sl = (al);			\
+	asm volatile(					\
+		"	slr	%1,%3\n"		\
+		"	brc	3,0f\n"			\
+		"	ahi	%0,-1\n"		\
+		"0:	slr	%0,%2"			\
+		: "+&d" (__sh), "+d" (__sl)		\
+		: "d" (bh), "d" (bl) : "cc");		\
+	(sh) = __sh;					\
+	(sl) = __sl;					\
+})
+
+/* a umul b = a mul b + (a>=2<<31) ? b<<32:0 + (b>=2<<31) ? a<<32:0 */
+#define umul_ppmm(wh, wl, u, v) ({			\
+	unsigned int __wh = u;				\
+	unsigned int __wl = v;				\
+	asm volatile(					\
+		"	ltr	1,%0\n"			\
+		"	mr	0,%1\n"			\
+		"	jnm	0f\n"				\
+		"	alr	0,%1\n"			\
+		"0:	ltr	%1,%1\n"			\
+		"	jnm	1f\n"				\
+		"	alr	0,%0\n"			\
+		"1:	lr	%0,0\n"			\
+		"	lr	%1,1\n"			\
+		: "+d" (__wh), "+d" (__wl)		\
+		: : "0", "1", "cc");			\
+	wh = __wh;					\
+	wl = __wl;					\
+})
+
+#ifdef __s390x__
+#define udiv_qrnnd(q, r, n1, n0, d)			\
+  do { unsigned long __n;				\
+       unsigned int __r, __d;				\
+    __n = ((unsigned long)(n1) << 32) + n0;		\
+    __d = (d);						\
+    (q) = __n / __d;					\
+    (r) = __n % __d;					\
+  } while (0)
+#else
+#define udiv_qrnnd(q, r, n1, n0, d)			\
+  do { unsigned int __r;				\
+    (q) = __udiv_qrnnd (&__r, (n1), (n0), (d));		\
+    (r) = __r;						\
+  } while (0)
+extern unsigned long __udiv_qrnnd (unsigned int *, unsigned int,
+				   unsigned int , unsigned int);
+#endif
+
+#define UDIV_NEEDS_NORMALIZATION 0
+
+#define abort() return 0
+
+#define __BYTE_ORDER __BIG_ENDIAN
diff --git a/arch/s390/include/asm/shmbuf.h b/arch/s390/include/asm/shmbuf.h
new file mode 100644
index 000000000000..eed2e280ce37
--- /dev/null
+++ b/arch/s390/include/asm/shmbuf.h
@@ -0,0 +1,48 @@
+#ifndef _S390_SHMBUF_H
+#define _S390_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for S/390 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem (for !__s390x__)
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+#ifndef __s390x__
+	unsigned long		__unused1;
+#endif /* ! __s390x__ */
+	__kernel_time_t		shm_dtime;	/* last detach time */
+#ifndef __s390x__
+	unsigned long		__unused2;
+#endif /* ! __s390x__ */
+	__kernel_time_t		shm_ctime;	/* last change time */
+#ifndef __s390x__
+	unsigned long		__unused3;
+#endif /* ! __s390x__ */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* _S390_SHMBUF_H */
diff --git a/arch/s390/include/asm/shmparam.h b/arch/s390/include/asm/shmparam.h
new file mode 100644
index 000000000000..c2e0c0508e73
--- /dev/null
+++ b/arch/s390/include/asm/shmparam.h
@@ -0,0 +1,13 @@
+/*
+ *  include/asm-s390/shmparam.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/shmparam.h"
+ */
+#ifndef _ASM_S390_SHMPARAM_H
+#define _ASM_S390_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE                 /* attach addr a multiple of this */
+
+#endif /* _ASM_S390_SHMPARAM_H */
diff --git a/arch/s390/include/asm/sigcontext.h b/arch/s390/include/asm/sigcontext.h
new file mode 100644
index 000000000000..aeb6e0b13329
--- /dev/null
+++ b/arch/s390/include/asm/sigcontext.h
@@ -0,0 +1,71 @@
+/*
+ *  include/asm-s390/sigcontext.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ */
+
+#ifndef _ASM_S390_SIGCONTEXT_H
+#define _ASM_S390_SIGCONTEXT_H
+
+#include <linux/compiler.h>
+
+#define __NUM_GPRS 16
+#define __NUM_FPRS 16
+#define __NUM_ACRS 16
+
+#ifndef __s390x__
+
+/* Has to be at least _NSIG_WORDS from asm/signal.h */
+#define _SIGCONTEXT_NSIG	64
+#define _SIGCONTEXT_NSIG_BPW	32
+/* Size of stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE	96
+
+#else /* __s390x__ */
+
+/* Has to be at least _NSIG_WORDS from asm/signal.h */
+#define _SIGCONTEXT_NSIG	64
+#define _SIGCONTEXT_NSIG_BPW	64 
+/* Size of stack frame allocated when calling signal handler. */
+#define __SIGNAL_FRAMESIZE	160
+
+#endif /* __s390x__ */
+
+#define _SIGCONTEXT_NSIG_WORDS	(_SIGCONTEXT_NSIG / _SIGCONTEXT_NSIG_BPW)
+#define _SIGMASK_COPY_SIZE	(sizeof(unsigned long)*_SIGCONTEXT_NSIG_WORDS)
+
+typedef struct 
+{
+        unsigned long mask;
+        unsigned long addr;
+} __attribute__ ((aligned(8))) _psw_t;
+
+typedef struct
+{
+	_psw_t psw;
+	unsigned long gprs[__NUM_GPRS];
+	unsigned int  acrs[__NUM_ACRS];
+} _s390_regs_common;
+
+typedef struct
+{
+	unsigned int fpc;
+	double   fprs[__NUM_FPRS];
+} _s390_fp_regs;
+
+typedef struct
+{
+	_s390_regs_common regs;
+	_s390_fp_regs     fpregs;
+} _sigregs;
+
+struct sigcontext
+{
+	unsigned long	oldmask[_SIGCONTEXT_NSIG_WORDS];
+	_sigregs        __user *sregs;
+};
+
+
+#endif
+
diff --git a/arch/s390/include/asm/siginfo.h b/arch/s390/include/asm/siginfo.h
new file mode 100644
index 000000000000..e0ff1ab054be
--- /dev/null
+++ b/arch/s390/include/asm/siginfo.h
@@ -0,0 +1,18 @@
+/*
+ *  include/asm-s390/siginfo.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/siginfo.h"
+ */
+
+#ifndef _S390_SIGINFO_H
+#define _S390_SIGINFO_H
+
+#ifdef __s390x__
+#define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int))
+#endif
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/arch/s390/include/asm/signal.h b/arch/s390/include/asm/signal.h
new file mode 100644
index 000000000000..f6cfddb278cb
--- /dev/null
+++ b/arch/s390/include/asm/signal.h
@@ -0,0 +1,172 @@
+/*
+ *  include/asm-s390/signal.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/signal.h"
+ */
+
+#ifndef _ASMS390_SIGNAL_H
+#define _ASMS390_SIGNAL_H
+
+#include <linux/types.h>
+#include <linux/time.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+struct pt_regs;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+#include <asm/sigcontext.h>
+#define _NSIG           _SIGCONTEXT_NSIG
+#define _NSIG_BPW       _SIGCONTEXT_NSIG_BPW
+#define _NSIG_WORDS     _SIGCONTEXT_NSIG_WORDS
+
+typedef unsigned long old_sigset_t;             /* at least 32 bits */
+
+typedef struct {
+        unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG            32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP           1
+#define SIGINT           2
+#define SIGQUIT          3
+#define SIGILL           4
+#define SIGTRAP          5
+#define SIGABRT          6
+#define SIGIOT           6
+#define SIGBUS           7
+#define SIGFPE           8
+#define SIGKILL          9
+#define SIGUSR1         10
+#define SIGSEGV         11
+#define SIGUSR2         12
+#define SIGPIPE         13
+#define SIGALRM         14
+#define SIGTERM         15
+#define SIGSTKFLT       16
+#define SIGCHLD         17
+#define SIGCONT         18
+#define SIGSTOP         19
+#define SIGTSTP         20
+#define SIGTTIN         21
+#define SIGTTOU         22
+#define SIGURG          23
+#define SIGXCPU         24
+#define SIGXFSZ         25
+#define SIGVTALRM       26
+#define SIGPROF         27
+#define SIGWINCH        28
+#define SIGIO           29
+#define SIGPOLL         SIGIO
+/*
+#define SIGLOST         29
+*/
+#define SIGPWR          30
+#define SIGSYS		31
+#define SIGUNUSED       31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN        32
+#define SIGRTMAX        _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP    0x00000001
+#define SA_NOCLDWAIT    0x00000002
+#define SA_SIGINFO      0x00000004
+#define SA_ONSTACK      0x08000000
+#define SA_RESTART      0x10000000
+#define SA_NODEFER      0x40000000
+#define SA_RESETHAND    0x80000000
+
+#define SA_NOMASK       SA_NODEFER
+#define SA_ONESHOT      SA_RESETHAND
+
+#define SA_RESTORER     0x04000000
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK      1
+#define SS_DISABLE      2
+
+#define MINSIGSTKSZ     2048
+#define SIGSTKSZ        8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+        __sighandler_t sa_handler;
+        old_sigset_t sa_mask;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+};
+
+struct sigaction {
+        __sighandler_t sa_handler;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+        sigset_t sa_mask;               /* mask last for extensibility */
+};
+
+struct k_sigaction {
+        struct sigaction sa;
+};
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+        union {
+          __sighandler_t _sa_handler;
+          void (*_sa_sigaction)(int, struct siginfo *, void *);
+        } _u;
+#ifndef __s390x__ /* lovely */
+        sigset_t sa_mask;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+#else  /* __s390x__ */
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+	sigset_t sa_mask;
+#endif /* __s390x__ */
+};
+
+#define sa_handler      _u._sa_handler
+#define sa_sigaction    _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+        void __user *ss_sp;
+        int ss_flags;
+        size_t ss_size;
+} stack_t;
+
+
+#endif
diff --git a/arch/s390/include/asm/sigp.h b/arch/s390/include/asm/sigp.h
new file mode 100644
index 000000000000..e16d56f8dfe1
--- /dev/null
+++ b/arch/s390/include/asm/sigp.h
@@ -0,0 +1,126 @@
+/*
+ *  include/asm-s390/sigp.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *               Heiko Carstens (heiko.carstens@de.ibm.com)
+ *
+ *  sigp.h by D.J. Barrow (c) IBM 1999
+ *  contains routines / structures for signalling other S/390 processors in an
+ *  SMP configuration.
+ */
+
+#ifndef __SIGP__
+#define __SIGP__
+
+#include <asm/ptrace.h>
+#include <asm/atomic.h>
+
+/* get real cpu address from logical cpu number */
+extern volatile int __cpu_logical_map[];
+
+typedef enum
+{
+	sigp_unassigned=0x0,
+	sigp_sense,
+	sigp_external_call,
+	sigp_emergency_signal,
+	sigp_start,
+	sigp_stop,
+	sigp_restart,
+	sigp_unassigned1,
+	sigp_unassigned2,
+	sigp_stop_and_store_status,
+	sigp_unassigned3,
+	sigp_initial_cpu_reset,
+	sigp_cpu_reset,
+	sigp_set_prefix,
+	sigp_store_status_at_address,
+	sigp_store_extended_status_at_address
+} sigp_order_code;
+
+typedef __u32 sigp_status_word;
+
+typedef enum
+{
+        sigp_order_code_accepted=0,
+	sigp_status_stored,
+	sigp_busy,
+	sigp_not_operational
+} sigp_ccode;
+
+
+/*
+ * Definitions for the external call
+ */
+
+/* 'Bit' signals, asynchronous */
+typedef enum
+{
+	ec_schedule=0,
+	ec_call_function,
+	ec_bit_last
+} ec_bit_sig;
+
+/*
+ * Signal processor
+ */
+static inline sigp_ccode
+signal_processor(__u16 cpu_addr, sigp_order_code order_code)
+{
+	register unsigned long reg1 asm ("1") = 0;
+	sigp_ccode ccode;
+
+	asm volatile(
+		"	sigp	%1,%2,0(%3)\n"
+		"	ipm	%0\n"
+		"	srl	%0,28\n"
+		:	"=d"	(ccode)
+		: "d" (reg1), "d" (__cpu_logical_map[cpu_addr]),
+		  "a" (order_code) : "cc" , "memory");
+	return ccode;
+}
+
+/*
+ * Signal processor with parameter
+ */
+static inline sigp_ccode
+signal_processor_p(__u32 parameter, __u16 cpu_addr, sigp_order_code order_code)
+{
+	register unsigned int reg1 asm ("1") = parameter;
+	sigp_ccode ccode;
+
+	asm volatile(
+		"	sigp	%1,%2,0(%3)\n"
+		"	ipm	%0\n"
+		"	srl	%0,28\n"
+		: "=d" (ccode)
+		: "d" (reg1), "d" (__cpu_logical_map[cpu_addr]),
+		  "a" (order_code) : "cc" , "memory");
+	return ccode;
+}
+
+/*
+ * Signal processor with parameter and return status
+ */
+static inline sigp_ccode
+signal_processor_ps(__u32 *statusptr, __u32 parameter, __u16 cpu_addr,
+		    sigp_order_code order_code)
+{
+	register unsigned int reg1 asm ("1") = parameter;
+	sigp_ccode ccode;
+
+	asm volatile(
+		"	sigp	%1,%2,0(%3)\n"
+		"	ipm	%0\n"
+		"	srl	%0,28\n"
+		: "=d" (ccode), "+d" (reg1)
+		: "d" (__cpu_logical_map[cpu_addr]), "a" (order_code)
+		: "cc" , "memory");
+	*statusptr = reg1;
+	return ccode;
+}
+
+#endif /* __SIGP__ */
diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
new file mode 100644
index 000000000000..ae89cf2478fc
--- /dev/null
+++ b/arch/s390/include/asm/smp.h
@@ -0,0 +1,116 @@
+/*
+ *  include/asm-s390/smp.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *               Heiko Carstens (heiko.carstens@de.ibm.com)
+ */
+#ifndef __ASM_SMP_H
+#define __ASM_SMP_H
+
+#include <linux/threads.h>
+#include <linux/cpumask.h>
+#include <linux/bitops.h>
+
+#if defined(__KERNEL__) && defined(CONFIG_SMP) && !defined(__ASSEMBLY__)
+
+#include <asm/lowcore.h>
+#include <asm/sigp.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+
+/*
+  s390 specific smp.c headers
+ */
+typedef struct
+{
+	int        intresting;
+	sigp_ccode ccode; 
+	__u32      status;
+	__u16      cpu;
+} sigp_info;
+
+extern void machine_restart_smp(char *);
+extern void machine_halt_smp(void);
+extern void machine_power_off_smp(void);
+
+#define NO_PROC_ID		0xFF		/* No processor magic marker */
+
+/*
+ *	This magic constant controls our willingness to transfer
+ *	a process across CPUs. Such a transfer incurs misses on the L1
+ *	cache, and on a P6 or P5 with multiple L2 caches L2 hits. My
+ *	gut feeling is this will vary by board in value. For a board
+ *	with separate L2 cache it probably depends also on the RSS, and
+ *	for a board with shared L2 cache it ought to decay fast as other
+ *	processes are run.
+ */
+ 
+#define PROC_CHANGE_PENALTY	20		/* Schedule penalty */
+
+#define raw_smp_processor_id()	(S390_lowcore.cpu_data.cpu_nr)
+
+static inline __u16 hard_smp_processor_id(void)
+{
+	return stap();
+}
+
+/*
+ * returns 1 if cpu is in stopped/check stopped state or not operational
+ * returns 0 otherwise
+ */
+static inline int
+smp_cpu_not_running(int cpu)
+{
+	__u32 status;
+
+	switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) {
+	case sigp_order_code_accepted:
+	case sigp_status_stored:
+		/* Check for stopped and check stop state */
+		if (status & 0x50)
+			return 1;
+		break;
+	case sigp_not_operational:
+		return 1;
+	default:
+		break;
+	}
+	return 0;
+}
+
+#define cpu_logical_map(cpu) (cpu)
+
+extern int __cpu_disable (void);
+extern void __cpu_die (unsigned int cpu);
+extern void cpu_die (void) __attribute__ ((noreturn));
+extern int __cpu_up (unsigned int cpu);
+
+extern struct mutex smp_cpu_state_mutex;
+extern int smp_cpu_polarization[];
+
+extern int smp_call_function_mask(cpumask_t mask, void (*func)(void *),
+	void *info, int wait);
+#endif
+
+#ifndef CONFIG_SMP
+static inline void smp_send_stop(void)
+{
+	/* Disable all interrupts/machine checks */
+	__load_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK);
+}
+
+#define hard_smp_processor_id()		0
+#define smp_cpu_not_running(cpu)	1
+#endif
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern int smp_rescan_cpus(void);
+#else
+static inline int smp_rescan_cpus(void) { return 0; }
+#endif
+
+extern union save_area *zfcpdump_save_areas[NR_CPUS + 1];
+#endif
diff --git a/arch/s390/include/asm/socket.h b/arch/s390/include/asm/socket.h
new file mode 100644
index 000000000000..c786ab623b2d
--- /dev/null
+++ b/arch/s390/include/asm/socket.h
@@ -0,0 +1,65 @@
+/*
+ *  include/asm-s390/socket.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/socket.h"
+ */
+
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_SNDBUFFORCE	32
+#define SO_RCVBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME		28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/s390/include/asm/sockios.h b/arch/s390/include/asm/sockios.h
new file mode 100644
index 000000000000..f4fc16c7da59
--- /dev/null
+++ b/arch/s390/include/asm/sockios.h
@@ -0,0 +1,21 @@
+/*
+ *  include/asm-s390/sockios.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/sockios.h"
+ */
+
+#ifndef __ARCH_S390_SOCKIOS__
+#define __ARCH_S390_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif
diff --git a/arch/s390/include/asm/sparsemem.h b/arch/s390/include/asm/sparsemem.h
new file mode 100644
index 000000000000..545d219e6a2d
--- /dev/null
+++ b/arch/s390/include/asm/sparsemem.h
@@ -0,0 +1,18 @@
+#ifndef _ASM_S390_SPARSEMEM_H
+#define _ASM_S390_SPARSEMEM_H
+
+#ifdef CONFIG_64BIT
+
+#define SECTION_SIZE_BITS	28
+#define MAX_PHYSADDR_BITS	42
+#define MAX_PHYSMEM_BITS	42
+
+#else
+
+#define SECTION_SIZE_BITS	25
+#define MAX_PHYSADDR_BITS	31
+#define MAX_PHYSMEM_BITS	31
+
+#endif /* CONFIG_64BIT */
+
+#endif /* _ASM_S390_SPARSEMEM_H */
diff --git a/arch/s390/include/asm/spinlock.h b/arch/s390/include/asm/spinlock.h
new file mode 100644
index 000000000000..df84ae96915f
--- /dev/null
+++ b/arch/s390/include/asm/spinlock.h
@@ -0,0 +1,178 @@
+/*
+ *  include/asm-s390/spinlock.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/spinlock.h"
+ */
+
+#ifndef __ASM_SPINLOCK_H
+#define __ASM_SPINLOCK_H
+
+#include <linux/smp.h>
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+
+static inline int
+_raw_compare_and_swap(volatile unsigned int *lock,
+		      unsigned int old, unsigned int new)
+{
+	asm volatile(
+		"	cs	%0,%3,%1"
+		: "=d" (old), "=Q" (*lock)
+		: "0" (old), "d" (new), "Q" (*lock)
+		: "cc", "memory" );
+	return old;
+}
+
+#else /* __GNUC__ */
+
+static inline int
+_raw_compare_and_swap(volatile unsigned int *lock,
+		      unsigned int old, unsigned int new)
+{
+	asm volatile(
+		"	cs	%0,%3,0(%4)"
+		: "=d" (old), "=m" (*lock)
+		: "0" (old), "d" (new), "a" (lock), "m" (*lock)
+		: "cc", "memory" );
+	return old;
+}
+
+#endif /* __GNUC__ */
+
+/*
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions. They have a cost.
+ *
+ * (the type definitions are in asm/spinlock_types.h)
+ */
+
+#define __raw_spin_is_locked(x) ((x)->owner_cpu != 0)
+#define __raw_spin_unlock_wait(lock) \
+	do { while (__raw_spin_is_locked(lock)) \
+		 _raw_spin_relax(lock); } while (0)
+
+extern void _raw_spin_lock_wait(raw_spinlock_t *);
+extern void _raw_spin_lock_wait_flags(raw_spinlock_t *, unsigned long flags);
+extern int _raw_spin_trylock_retry(raw_spinlock_t *);
+extern void _raw_spin_relax(raw_spinlock_t *lock);
+
+static inline void __raw_spin_lock(raw_spinlock_t *lp)
+{
+	int old;
+
+	old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id());
+	if (likely(old == 0))
+		return;
+	_raw_spin_lock_wait(lp);
+}
+
+static inline void __raw_spin_lock_flags(raw_spinlock_t *lp,
+					 unsigned long flags)
+{
+	int old;
+
+	old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id());
+	if (likely(old == 0))
+		return;
+	_raw_spin_lock_wait_flags(lp, flags);
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lp)
+{
+	int old;
+
+	old = _raw_compare_and_swap(&lp->owner_cpu, 0, ~smp_processor_id());
+	if (likely(old == 0))
+		return 1;
+	return _raw_spin_trylock_retry(lp);
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lp)
+{
+	_raw_compare_and_swap(&lp->owner_cpu, lp->owner_cpu, 0);
+}
+		
+/*
+ * Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+
+/**
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_read_can_lock(x) ((int)(x)->lock >= 0)
+
+/**
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_write_can_lock(x) ((x)->lock == 0)
+
+extern void _raw_read_lock_wait(raw_rwlock_t *lp);
+extern int _raw_read_trylock_retry(raw_rwlock_t *lp);
+extern void _raw_write_lock_wait(raw_rwlock_t *lp);
+extern int _raw_write_trylock_retry(raw_rwlock_t *lp);
+
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+	unsigned int old;
+	old = rw->lock & 0x7fffffffU;
+	if (_raw_compare_and_swap(&rw->lock, old, old + 1) != old)
+		_raw_read_lock_wait(rw);
+}
+
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+	unsigned int old, cmp;
+
+	old = rw->lock;
+	do {
+		cmp = old;
+		old = _raw_compare_and_swap(&rw->lock, old, old - 1);
+	} while (cmp != old);
+}
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+	if (unlikely(_raw_compare_and_swap(&rw->lock, 0, 0x80000000) != 0))
+		_raw_write_lock_wait(rw);
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+	_raw_compare_and_swap(&rw->lock, 0x80000000, 0);
+}
+
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+	unsigned int old;
+	old = rw->lock & 0x7fffffffU;
+	if (likely(_raw_compare_and_swap(&rw->lock, old, old + 1) == old))
+		return 1;
+	return _raw_read_trylock_retry(rw);
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+	if (likely(_raw_compare_and_swap(&rw->lock, 0, 0x80000000) == 0))
+		return 1;
+	return _raw_write_trylock_retry(rw);
+}
+
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /* __ASM_SPINLOCK_H */
diff --git a/arch/s390/include/asm/spinlock_types.h b/arch/s390/include/asm/spinlock_types.h
new file mode 100644
index 000000000000..654abc40de04
--- /dev/null
+++ b/arch/s390/include/asm/spinlock_types.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_SPINLOCK_TYPES_H
+#define __ASM_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	volatile unsigned int owner_cpu;
+} __attribute__ ((aligned (4))) raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
+
+#endif
diff --git a/arch/s390/include/asm/stat.h b/arch/s390/include/asm/stat.h
new file mode 100644
index 000000000000..d92959eebb65
--- /dev/null
+++ b/arch/s390/include/asm/stat.h
@@ -0,0 +1,105 @@
+/*
+ *  include/asm-s390/stat.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/stat.h"
+ */
+
+#ifndef _S390_STAT_H
+#define _S390_STAT_H
+
+#ifndef __s390x__
+struct __old_kernel_stat {
+        unsigned short st_dev;
+        unsigned short st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned short st_rdev;
+        unsigned long  st_size;
+        unsigned long  st_atime;
+        unsigned long  st_mtime;
+        unsigned long  st_ctime;
+};
+
+struct stat {
+        unsigned short st_dev;
+        unsigned short __pad1;
+        unsigned long  st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned short st_rdev;
+        unsigned short __pad2;
+        unsigned long  st_size;
+        unsigned long  st_blksize;
+        unsigned long  st_blocks;
+        unsigned long  st_atime;
+        unsigned long  st_atime_nsec;
+        unsigned long  st_mtime;
+        unsigned long  st_mtime_nsec;
+        unsigned long  st_ctime;
+        unsigned long  st_ctime_nsec;
+        unsigned long  __unused4;
+        unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+        unsigned long long	st_dev;
+        unsigned int    __pad1;
+#define STAT64_HAS_BROKEN_ST_INO        1
+        unsigned long   __st_ino;
+        unsigned int    st_mode;
+        unsigned int    st_nlink;
+        unsigned long   st_uid;
+        unsigned long   st_gid;
+        unsigned long long	st_rdev;
+        unsigned int    __pad3;
+        long long	st_size;
+        unsigned long   st_blksize;
+        unsigned char   __pad4[4];
+        unsigned long   __pad5;     /* future possible st_blocks high bits */
+        unsigned long   st_blocks;  /* Number 512-byte blocks allocated. */
+        unsigned long   st_atime;
+        unsigned long   st_atime_nsec;
+        unsigned long   st_mtime;
+        unsigned long   st_mtime_nsec;
+        unsigned long   st_ctime;
+        unsigned long   st_ctime_nsec;  /* will be high 32 bits of ctime someday */
+        unsigned long long	st_ino;
+};
+
+#else /* __s390x__ */
+
+struct stat {
+        unsigned long  st_dev;
+        unsigned long  st_ino;
+        unsigned long  st_nlink;
+        unsigned int   st_mode;
+        unsigned int   st_uid;
+        unsigned int   st_gid;
+        unsigned int   __pad1;
+        unsigned long  st_rdev;
+        unsigned long  st_size;
+        unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+        unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+        unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+        unsigned long  st_blksize;
+        long           st_blocks;
+        unsigned long  __unused[3];
+};
+
+#endif /* __s390x__ */
+
+#define STAT_HAVE_NSEC 1
+
+#endif
diff --git a/arch/s390/include/asm/statfs.h b/arch/s390/include/asm/statfs.h
new file mode 100644
index 000000000000..099a45579190
--- /dev/null
+++ b/arch/s390/include/asm/statfs.h
@@ -0,0 +1,71 @@
+/*
+ *  include/asm-s390/statfs.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/statfs.h"
+ */
+
+#ifndef _S390_STATFS_H
+#define _S390_STATFS_H
+
+#ifndef __s390x__
+#include <asm-generic/statfs.h>
+#else
+
+#ifndef __KERNEL_STRICT_NAMES
+
+#include <linux/types.h>
+
+typedef __kernel_fsid_t	fsid_t;
+
+#endif
+
+/*
+ * This is ugly -- we're already 64-bit clean, so just duplicate the 
+ * definitions.
+ */
+struct statfs {
+	int  f_type;
+	int  f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	int  f_namelen;
+	int  f_frsize;
+	int  f_spare[5];
+};
+
+struct statfs64 {
+	int  f_type;
+	int  f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	int  f_namelen;
+	int  f_frsize;
+	int  f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+};
+
+#endif /* __s390x__ */
+#endif
diff --git a/arch/s390/include/asm/string.h b/arch/s390/include/asm/string.h
new file mode 100644
index 000000000000..d074673a6d9b
--- /dev/null
+++ b/arch/s390/include/asm/string.h
@@ -0,0 +1,143 @@
+/*
+ *  include/asm-s390/string.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ */
+
+#ifndef _S390_STRING_H_
+#define _S390_STRING_H_
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_TYPES_H
+#include <linux/types.h>
+#endif
+
+#define __HAVE_ARCH_MEMCHR	/* inline & arch function */
+#define __HAVE_ARCH_MEMCMP	/* arch function */
+#define __HAVE_ARCH_MEMCPY	/* gcc builtin & arch function */
+#define __HAVE_ARCH_MEMSCAN	/* inline & arch function */
+#define __HAVE_ARCH_MEMSET	/* gcc builtin & arch function */
+#define __HAVE_ARCH_STRCAT	/* inline & arch function */
+#define __HAVE_ARCH_STRCMP	/* arch function */
+#define __HAVE_ARCH_STRCPY	/* inline & arch function */
+#define __HAVE_ARCH_STRLCAT	/* arch function */
+#define __HAVE_ARCH_STRLCPY	/* arch function */
+#define __HAVE_ARCH_STRLEN	/* inline & arch function */
+#define __HAVE_ARCH_STRNCAT	/* arch function */
+#define __HAVE_ARCH_STRNCPY	/* arch function */
+#define __HAVE_ARCH_STRNLEN	/* inline & arch function */
+#define __HAVE_ARCH_STRRCHR	/* arch function */
+#define __HAVE_ARCH_STRSTR	/* arch function */
+
+/* Prototypes for non-inlined arch strings functions. */
+extern int memcmp(const void *, const void *, size_t);
+extern void *memcpy(void *, const void *, size_t);
+extern void *memset(void *, int, size_t);
+extern int strcmp(const char *,const char *);
+extern size_t strlcat(char *, const char *, size_t);
+extern size_t strlcpy(char *, const char *, size_t);
+extern char *strncat(char *, const char *, size_t);
+extern char *strncpy(char *, const char *, size_t);
+extern char *strrchr(const char *, int);
+extern char *strstr(const char *, const char *);
+
+#undef __HAVE_ARCH_MEMMOVE
+#undef __HAVE_ARCH_STRCHR
+#undef __HAVE_ARCH_STRNCHR
+#undef __HAVE_ARCH_STRNCMP
+#undef __HAVE_ARCH_STRNICMP
+#undef __HAVE_ARCH_STRPBRK
+#undef __HAVE_ARCH_STRSEP
+#undef __HAVE_ARCH_STRSPN
+
+#if !defined(IN_ARCH_STRING_C)
+
+static inline void *memchr(const void * s, int c, size_t n)
+{
+	register int r0 asm("0") = (char) c;
+	const void *ret = s + n;
+
+	asm volatile(
+		"0:	srst	%0,%1\n"
+		"	jo	0b\n"
+		"	jl	1f\n"
+		"	la	%0,0\n"
+		"1:"
+		: "+a" (ret), "+&a" (s) : "d" (r0) : "cc");
+	return (void *) ret;
+}
+
+static inline void *memscan(void *s, int c, size_t n)
+{
+	register int r0 asm("0") = (char) c;
+	const void *ret = s + n;
+
+	asm volatile(
+		"0:	srst	%0,%1\n"
+		"	jo	0b\n"
+		: "+a" (ret), "+&a" (s) : "d" (r0) : "cc");
+	return (void *) ret;
+}
+
+static inline char *strcat(char *dst, const char *src)
+{
+	register int r0 asm("0") = 0;
+	unsigned long dummy;
+	char *ret = dst;
+
+	asm volatile(
+		"0:	srst	%0,%1\n"
+		"	jo	0b\n"
+		"1:	mvst	%0,%2\n"
+		"	jo	1b"
+		: "=&a" (dummy), "+a" (dst), "+a" (src)
+		: "d" (r0), "0" (0) : "cc", "memory" );
+	return ret;
+}
+
+static inline char *strcpy(char *dst, const char *src)
+{
+	register int r0 asm("0") = 0;
+	char *ret = dst;
+
+	asm volatile(
+		"0:	mvst	%0,%1\n"
+		"	jo	0b"
+		: "+&a" (dst), "+&a" (src) : "d" (r0)
+		: "cc", "memory");
+	return ret;
+}
+
+static inline size_t strlen(const char *s)
+{
+	register unsigned long r0 asm("0") = 0;
+	const char *tmp = s;
+
+	asm volatile(
+		"0:	srst	%0,%1\n"
+		"	jo	0b"
+		: "+d" (r0), "+a" (tmp) :  : "cc");
+	return r0 - (unsigned long) s;
+}
+
+static inline size_t strnlen(const char * s, size_t n)
+{
+	register int r0 asm("0") = 0;
+	const char *tmp = s;
+	const char *end = s + n;
+
+	asm volatile(
+		"0:	srst	%0,%1\n"
+		"	jo	0b"
+		: "+a" (end), "+a" (tmp) : "d" (r0)  : "cc");
+	return end - s;
+}
+
+#endif /* !IN_ARCH_STRING_C */
+
+#endif /* __KERNEL__ */
+
+#endif /* __S390_STRING_H_ */
diff --git a/arch/s390/include/asm/suspend.h b/arch/s390/include/asm/suspend.h
new file mode 100644
index 000000000000..1f34580e67a7
--- /dev/null
+++ b/arch/s390/include/asm/suspend.h
@@ -0,0 +1,5 @@
+#ifndef __ASM_S390_SUSPEND_H
+#define __ASM_S390_SUSPEND_H
+
+#endif
+
diff --git a/arch/s390/include/asm/sysinfo.h b/arch/s390/include/asm/sysinfo.h
new file mode 100644
index 000000000000..79d01343f8b0
--- /dev/null
+++ b/arch/s390/include/asm/sysinfo.h
@@ -0,0 +1,121 @@
+/*
+ * definition for store system information stsi
+ *
+ * Copyright IBM Corp. 2001,2008
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License (version 2 only)
+ * as published by the Free Software Foundation.
+ *
+ *    Author(s): Ulrich Weigand <weigand@de.ibm.com>
+ *		 Christian Borntraeger <borntraeger@de.ibm.com>
+ */
+
+#ifndef __ASM_S390_SYSINFO_H
+#define __ASM_S390_SYSINFO_H
+
+struct sysinfo_1_1_1 {
+	char reserved_0[32];
+	char manufacturer[16];
+	char type[4];
+	char reserved_1[12];
+	char model_capacity[16];
+	char sequence[16];
+	char plant[4];
+	char model[16];
+	char model_perm_cap[16];
+	char model_temp_cap[16];
+	char model_cap_rating[4];
+	char model_perm_cap_rating[4];
+	char model_temp_cap_rating[4];
+};
+
+struct sysinfo_1_2_1 {
+	char reserved_0[80];
+	char sequence[16];
+	char plant[4];
+	char reserved_1[2];
+	unsigned short cpu_address;
+};
+
+struct sysinfo_1_2_2 {
+	char format;
+	char reserved_0[1];
+	unsigned short acc_offset;
+	char reserved_1[24];
+	unsigned int secondary_capability;
+	unsigned int capability;
+	unsigned short cpus_total;
+	unsigned short cpus_configured;
+	unsigned short cpus_standby;
+	unsigned short cpus_reserved;
+	unsigned short adjustment[0];
+};
+
+struct sysinfo_1_2_2_extension {
+	unsigned int alt_capability;
+	unsigned short alt_adjustment[0];
+};
+
+struct sysinfo_2_2_1 {
+	char reserved_0[80];
+	char sequence[16];
+	char plant[4];
+	unsigned short cpu_id;
+	unsigned short cpu_address;
+};
+
+struct sysinfo_2_2_2 {
+	char reserved_0[32];
+	unsigned short lpar_number;
+	char reserved_1;
+	unsigned char characteristics;
+	unsigned short cpus_total;
+	unsigned short cpus_configured;
+	unsigned short cpus_standby;
+	unsigned short cpus_reserved;
+	char name[8];
+	unsigned int caf;
+	char reserved_2[16];
+	unsigned short cpus_dedicated;
+	unsigned short cpus_shared;
+};
+
+#define LPAR_CHAR_DEDICATED	(1 << 7)
+#define LPAR_CHAR_SHARED	(1 << 6)
+#define LPAR_CHAR_LIMITED	(1 << 5)
+
+struct sysinfo_3_2_2 {
+	char reserved_0[31];
+	unsigned char count;
+	struct {
+		char reserved_0[4];
+		unsigned short cpus_total;
+		unsigned short cpus_configured;
+		unsigned short cpus_standby;
+		unsigned short cpus_reserved;
+		char name[8];
+		unsigned int caf;
+		char cpi[16];
+		char reserved_1[24];
+
+	} vm[8];
+};
+
+static inline int stsi(void *sysinfo, int fc, int sel1, int sel2)
+{
+	register int r0 asm("0") = (fc << 28) | sel1;
+	register int r1 asm("1") = sel2;
+
+	asm volatile(
+		"   stsi 0(%2)\n"
+		"0: jz   2f\n"
+		"1: lhi  %0,%3\n"
+		"2:\n"
+		EX_TABLE(0b, 1b)
+		: "+d" (r0) : "d" (r1), "a" (sysinfo), "K" (-ENOSYS)
+		: "cc", "memory");
+	return r0;
+}
+
+#endif /* __ASM_S390_SYSINFO_H */
diff --git a/arch/s390/include/asm/system.h b/arch/s390/include/asm/system.h
new file mode 100644
index 000000000000..819e7d99ca0c
--- /dev/null
+++ b/arch/s390/include/asm/system.h
@@ -0,0 +1,462 @@
+/*
+ *  include/asm-s390/system.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *
+ *  Derived from "include/asm-i386/system.h"
+ */
+
+#ifndef __ASM_SYSTEM_H
+#define __ASM_SYSTEM_H
+
+#include <linux/kernel.h>
+#include <asm/types.h>
+#include <asm/ptrace.h>
+#include <asm/setup.h>
+#include <asm/processor.h>
+#include <asm/lowcore.h>
+
+#ifdef __KERNEL__
+
+struct task_struct;
+
+extern struct task_struct *__switch_to(void *, void *);
+
+static inline void save_fp_regs(s390_fp_regs *fpregs)
+{
+	asm volatile(
+		"	std	0,8(%1)\n"
+		"	std	2,24(%1)\n"
+		"	std	4,40(%1)\n"
+		"	std	6,56(%1)"
+		: "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory");
+	if (!MACHINE_HAS_IEEE)
+		return;
+	asm volatile(
+		"	stfpc	0(%1)\n"
+		"	std	1,16(%1)\n"
+		"	std	3,32(%1)\n"
+		"	std	5,48(%1)\n"
+		"	std	7,64(%1)\n"
+		"	std	8,72(%1)\n"
+		"	std	9,80(%1)\n"
+		"	std	10,88(%1)\n"
+		"	std	11,96(%1)\n"
+		"	std	12,104(%1)\n"
+		"	std	13,112(%1)\n"
+		"	std	14,120(%1)\n"
+		"	std	15,128(%1)\n"
+		: "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory");
+}
+
+static inline void restore_fp_regs(s390_fp_regs *fpregs)
+{
+	asm volatile(
+		"	ld	0,8(%0)\n"
+		"	ld	2,24(%0)\n"
+		"	ld	4,40(%0)\n"
+		"	ld	6,56(%0)"
+		: : "a" (fpregs), "m" (*fpregs));
+	if (!MACHINE_HAS_IEEE)
+		return;
+	asm volatile(
+		"	lfpc	0(%0)\n"
+		"	ld	1,16(%0)\n"
+		"	ld	3,32(%0)\n"
+		"	ld	5,48(%0)\n"
+		"	ld	7,64(%0)\n"
+		"	ld	8,72(%0)\n"
+		"	ld	9,80(%0)\n"
+		"	ld	10,88(%0)\n"
+		"	ld	11,96(%0)\n"
+		"	ld	12,104(%0)\n"
+		"	ld	13,112(%0)\n"
+		"	ld	14,120(%0)\n"
+		"	ld	15,128(%0)\n"
+		: : "a" (fpregs), "m" (*fpregs));
+}
+
+static inline void save_access_regs(unsigned int *acrs)
+{
+	asm volatile("stam 0,15,0(%0)" : : "a" (acrs) : "memory");
+}
+
+static inline void restore_access_regs(unsigned int *acrs)
+{
+	asm volatile("lam 0,15,0(%0)" : : "a" (acrs));
+}
+
+#define switch_to(prev,next,last) do {					     \
+	if (prev == next)						     \
+		break;							     \
+	save_fp_regs(&prev->thread.fp_regs);				     \
+	restore_fp_regs(&next->thread.fp_regs);				     \
+	save_access_regs(&prev->thread.acrs[0]);			     \
+	restore_access_regs(&next->thread.acrs[0]);			     \
+	prev = __switch_to(prev,next);					     \
+} while (0)
+
+#ifdef CONFIG_VIRT_CPU_ACCOUNTING
+extern void account_vtime(struct task_struct *);
+extern void account_tick_vtime(struct task_struct *);
+extern void account_system_vtime(struct task_struct *);
+#else
+#define account_vtime(x) do { /* empty */ } while (0)
+#endif
+
+#ifdef CONFIG_PFAULT
+extern void pfault_irq_init(void);
+extern int pfault_init(void);
+extern void pfault_fini(void);
+#else /* CONFIG_PFAULT */
+#define pfault_irq_init()	do { } while (0)
+#define pfault_init()		({-1;})
+#define pfault_fini()		do { } while (0)
+#endif /* CONFIG_PFAULT */
+
+#ifdef CONFIG_PAGE_STATES
+extern void cmma_init(void);
+#else
+static inline void cmma_init(void) { }
+#endif
+
+#define finish_arch_switch(prev) do {					     \
+	set_fs(current->thread.mm_segment);				     \
+	account_vtime(prev);						     \
+} while (0)
+
+#define nop() asm volatile("nop")
+
+#define xchg(ptr,x)							  \
+({									  \
+	__typeof__(*(ptr)) __ret;					  \
+	__ret = (__typeof__(*(ptr)))					  \
+		__xchg((unsigned long)(x), (void *)(ptr),sizeof(*(ptr))); \
+	__ret;								  \
+})
+
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long __xchg(unsigned long x, void * ptr, int size)
+{
+	unsigned long addr, old;
+	int shift;
+
+        switch (size) {
+	case 1:
+		addr = (unsigned long) ptr;
+		shift = (3 ^ (addr & 3)) << 3;
+		addr ^= addr & 3;
+		asm volatile(
+			"	l	%0,0(%4)\n"
+			"0:	lr	0,%0\n"
+			"	nr	0,%3\n"
+			"	or	0,%2\n"
+			"	cs	%0,0,0(%4)\n"
+			"	jl	0b\n"
+			: "=&d" (old), "=m" (*(int *) addr)
+			: "d" (x << shift), "d" (~(255 << shift)), "a" (addr),
+			  "m" (*(int *) addr) : "memory", "cc", "0");
+		return old >> shift;
+	case 2:
+		addr = (unsigned long) ptr;
+		shift = (2 ^ (addr & 2)) << 3;
+		addr ^= addr & 2;
+		asm volatile(
+			"	l	%0,0(%4)\n"
+			"0:	lr	0,%0\n"
+			"	nr	0,%3\n"
+			"	or	0,%2\n"
+			"	cs	%0,0,0(%4)\n"
+			"	jl	0b\n"
+			: "=&d" (old), "=m" (*(int *) addr)
+			: "d" (x << shift), "d" (~(65535 << shift)), "a" (addr),
+			  "m" (*(int *) addr) : "memory", "cc", "0");
+		return old >> shift;
+	case 4:
+		asm volatile(
+			"	l	%0,0(%3)\n"
+			"0:	cs	%0,%2,0(%3)\n"
+			"	jl	0b\n"
+			: "=&d" (old), "=m" (*(int *) ptr)
+			: "d" (x), "a" (ptr), "m" (*(int *) ptr)
+			: "memory", "cc");
+		return old;
+#ifdef __s390x__
+	case 8:
+		asm volatile(
+			"	lg	%0,0(%3)\n"
+			"0:	csg	%0,%2,0(%3)\n"
+			"	jl	0b\n"
+			: "=&d" (old), "=m" (*(long *) ptr)
+			: "d" (x), "a" (ptr), "m" (*(long *) ptr)
+			: "memory", "cc");
+		return old;
+#endif /* __s390x__ */
+	}
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+#define cmpxchg(ptr, o, n)						\
+	((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o),	\
+					(unsigned long)(n), sizeof(*(ptr))))
+
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+	unsigned long addr, prev, tmp;
+	int shift;
+
+        switch (size) {
+	case 1:
+		addr = (unsigned long) ptr;
+		shift = (3 ^ (addr & 3)) << 3;
+		addr ^= addr & 3;
+		asm volatile(
+			"	l	%0,0(%4)\n"
+			"0:	nr	%0,%5\n"
+			"	lr	%1,%0\n"
+			"	or	%0,%2\n"
+			"	or	%1,%3\n"
+			"	cs	%0,%1,0(%4)\n"
+			"	jnl	1f\n"
+			"	xr	%1,%0\n"
+			"	nr	%1,%5\n"
+			"	jnz	0b\n"
+			"1:"
+			: "=&d" (prev), "=&d" (tmp)
+			: "d" (old << shift), "d" (new << shift), "a" (ptr),
+			  "d" (~(255 << shift))
+			: "memory", "cc");
+		return prev >> shift;
+	case 2:
+		addr = (unsigned long) ptr;
+		shift = (2 ^ (addr & 2)) << 3;
+		addr ^= addr & 2;
+		asm volatile(
+			"	l	%0,0(%4)\n"
+			"0:	nr	%0,%5\n"
+			"	lr	%1,%0\n"
+			"	or	%0,%2\n"
+			"	or	%1,%3\n"
+			"	cs	%0,%1,0(%4)\n"
+			"	jnl	1f\n"
+			"	xr	%1,%0\n"
+			"	nr	%1,%5\n"
+			"	jnz	0b\n"
+			"1:"
+			: "=&d" (prev), "=&d" (tmp)
+			: "d" (old << shift), "d" (new << shift), "a" (ptr),
+			  "d" (~(65535 << shift))
+			: "memory", "cc");
+		return prev >> shift;
+	case 4:
+		asm volatile(
+			"	cs	%0,%2,0(%3)\n"
+			: "=&d" (prev) : "0" (old), "d" (new), "a" (ptr)
+			: "memory", "cc");
+		return prev;
+#ifdef __s390x__
+	case 8:
+		asm volatile(
+			"	csg	%0,%2,0(%3)\n"
+			: "=&d" (prev) : "0" (old), "d" (new), "a" (ptr)
+			: "memory", "cc");
+		return prev;
+#endif /* __s390x__ */
+        }
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+/*
+ * Force strict CPU ordering.
+ * And yes, this is required on UP too when we're talking
+ * to devices.
+ *
+ * This is very similar to the ppc eieio/sync instruction in that is
+ * does a checkpoint syncronisation & makes sure that 
+ * all memory ops have completed wrt other CPU's ( see 7-15 POP  DJB ).
+ */
+
+#define eieio()	asm volatile("bcr 15,0" : : : "memory")
+#define SYNC_OTHER_CORES(x)   eieio()
+#define mb()    eieio()
+#define rmb()   eieio()
+#define wmb()   eieio()
+#define read_barrier_depends() do { } while(0)
+#define smp_mb()       mb()
+#define smp_rmb()      rmb()
+#define smp_wmb()      wmb()
+#define smp_read_barrier_depends()    read_barrier_depends()
+#define smp_mb__before_clear_bit()     smp_mb()
+#define smp_mb__after_clear_bit()      smp_mb()
+
+
+#define set_mb(var, value)      do { var = value; mb(); } while (0)
+
+#ifdef __s390x__
+
+#define __ctl_load(array, low, high) ({				\
+	typedef struct { char _[sizeof(array)]; } addrtype;	\
+	asm volatile(						\
+		"	lctlg	%1,%2,0(%0)\n"			\
+		: : "a" (&array), "i" (low), "i" (high),	\
+		    "m" (*(addrtype *)(&array)));		\
+	})
+
+#define __ctl_store(array, low, high) ({			\
+	typedef struct { char _[sizeof(array)]; } addrtype;	\
+	asm volatile(						\
+		"	stctg	%2,%3,0(%1)\n"			\
+		: "=m" (*(addrtype *)(&array))			\
+		: "a" (&array), "i" (low), "i" (high));		\
+	})
+
+#else /* __s390x__ */
+
+#define __ctl_load(array, low, high) ({				\
+	typedef struct { char _[sizeof(array)]; } addrtype;	\
+	asm volatile(						\
+		"	lctl	%1,%2,0(%0)\n"			\
+		: : "a" (&array), "i" (low), "i" (high),	\
+		    "m" (*(addrtype *)(&array)));		\
+})
+
+#define __ctl_store(array, low, high) ({			\
+	typedef struct { char _[sizeof(array)]; } addrtype;	\
+	asm volatile(						\
+		"	stctl	%2,%3,0(%1)\n"			\
+		: "=m" (*(addrtype *)(&array))			\
+		: "a" (&array), "i" (low), "i" (high));		\
+	})
+
+#endif /* __s390x__ */
+
+#define __ctl_set_bit(cr, bit) ({	\
+	unsigned long __dummy;		\
+	__ctl_store(__dummy, cr, cr);	\
+	__dummy |= 1UL << (bit);	\
+	__ctl_load(__dummy, cr, cr);	\
+})
+
+#define __ctl_clear_bit(cr, bit) ({	\
+	unsigned long __dummy;		\
+	__ctl_store(__dummy, cr, cr);	\
+	__dummy &= ~(1UL << (bit));	\
+	__ctl_load(__dummy, cr, cr);	\
+})
+
+#include <linux/irqflags.h>
+
+#include <asm-generic/cmpxchg-local.h>
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+				      unsigned long old,
+				      unsigned long new, int size)
+{
+	switch (size) {
+	case 1:
+	case 2:
+	case 4:
+#ifdef __s390x__
+	case 8:
+#endif
+		return __cmpxchg(ptr, old, new, size);
+	default:
+		return __cmpxchg_local_generic(ptr, old, new, size);
+	}
+
+	return old;
+}
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)					\
+	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
+			(unsigned long)(n), sizeof(*(ptr))))
+#ifdef __s390x__
+#define cmpxchg64_local(ptr, o, n)					\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+  })
+#else
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+#endif
+
+/*
+ * Use to set psw mask except for the first byte which
+ * won't be changed by this function.
+ */
+static inline void
+__set_psw_mask(unsigned long mask)
+{
+	__load_psw_mask(mask | (__raw_local_irq_stosm(0x00) & ~(-1UL >> 8)));
+}
+
+#define local_mcck_enable()  __set_psw_mask(psw_kernel_bits)
+#define local_mcck_disable() __set_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK)
+
+int stfle(unsigned long long *list, int doublewords);
+
+#ifdef CONFIG_SMP
+
+extern void smp_ctl_set_bit(int cr, int bit);
+extern void smp_ctl_clear_bit(int cr, int bit);
+#define ctl_set_bit(cr, bit) smp_ctl_set_bit(cr, bit)
+#define ctl_clear_bit(cr, bit) smp_ctl_clear_bit(cr, bit)
+
+#else
+
+#define ctl_set_bit(cr, bit) __ctl_set_bit(cr, bit)
+#define ctl_clear_bit(cr, bit) __ctl_clear_bit(cr, bit)
+
+#endif /* CONFIG_SMP */
+
+static inline unsigned int stfl(void)
+{
+	asm volatile(
+		"	.insn	s,0xb2b10000,0(0)\n" /* stfl */
+		"0:\n"
+		EX_TABLE(0b,0b));
+	return S390_lowcore.stfl_fac_list;
+}
+
+static inline unsigned short stap(void)
+{
+	unsigned short cpu_address;
+
+	asm volatile("stap %0" : "=m" (cpu_address));
+	return cpu_address;
+}
+
+extern void (*_machine_restart)(char *command);
+extern void (*_machine_halt)(void);
+extern void (*_machine_power_off)(void);
+
+#define arch_align_stack(x) (x)
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+extern psw_t sysc_restore_trace_psw;
+extern psw_t io_restore_trace_psw;
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/s390/include/asm/tape390.h b/arch/s390/include/asm/tape390.h
new file mode 100644
index 000000000000..884fba48f1ff
--- /dev/null
+++ b/arch/s390/include/asm/tape390.h
@@ -0,0 +1,103 @@
+/*************************************************************************
+ *
+ * tape390.h
+ *	   enables user programs to display messages and control encryption
+ *	   on s390 tape devices
+ *
+ *	   Copyright IBM Corp. 2001,2006
+ *	   Author(s): Michael Holzheu <holzheu@de.ibm.com>
+ *
+ *************************************************************************/
+
+#ifndef _TAPE390_H
+#define _TAPE390_H
+
+#define TAPE390_DISPLAY _IOW('d', 1, struct display_struct)
+
+/*
+ * The TAPE390_DISPLAY ioctl calls the Load Display command
+ * which transfers 17 bytes of data from the channel to the subsystem:
+ *     - 1 format control byte, and
+ *     - two 8-byte messages
+ *
+ * Format control byte:
+ *   0-2: New Message Overlay
+ *     3: Alternate Messages
+ *     4: Blink Message
+ *     5: Display Low/High Message
+ *     6: Reserved
+ *     7: Automatic Load Request
+ *
+ */
+
+typedef struct display_struct {
+        char cntrl;
+        char message1[8];
+        char message2[8];
+} display_struct;
+
+/*
+ * Tape encryption support
+ */
+
+struct tape390_crypt_info {
+	char capability;
+	char status;
+	char medium_status;
+} __attribute__ ((packed));
+
+
+/* Macros for "capable" field */
+#define TAPE390_CRYPT_SUPPORTED_MASK 0x01
+#define TAPE390_CRYPT_SUPPORTED(x) \
+	((x.capability & TAPE390_CRYPT_SUPPORTED_MASK))
+
+/* Macros for "status" field */
+#define TAPE390_CRYPT_ON_MASK 0x01
+#define TAPE390_CRYPT_ON(x) (((x.status) & TAPE390_CRYPT_ON_MASK))
+
+/* Macros for "medium status" field */
+#define TAPE390_MEDIUM_LOADED_MASK 0x01
+#define TAPE390_MEDIUM_ENCRYPTED_MASK 0x02
+#define TAPE390_MEDIUM_ENCRYPTED(x) \
+	(((x.medium_status) & TAPE390_MEDIUM_ENCRYPTED_MASK))
+#define TAPE390_MEDIUM_LOADED(x) \
+	(((x.medium_status) & TAPE390_MEDIUM_LOADED_MASK))
+
+/*
+ * The TAPE390_CRYPT_SET ioctl is used to switch on/off encryption.
+ * The "encryption_capable" and "tape_status" fields are ignored for this ioctl!
+ */
+#define TAPE390_CRYPT_SET _IOW('d', 2, struct tape390_crypt_info)
+
+/*
+ * The TAPE390_CRYPT_QUERY ioctl is used to query the encryption state.
+ */
+#define TAPE390_CRYPT_QUERY _IOR('d', 3, struct tape390_crypt_info)
+
+/* Values for "kekl1/2_type" and "kekl1/2_type_on_tape" fields */
+#define TAPE390_KEKL_TYPE_NONE 0
+#define TAPE390_KEKL_TYPE_LABEL 1
+#define TAPE390_KEKL_TYPE_HASH 2
+
+struct tape390_kekl {
+	unsigned char type;
+	unsigned char type_on_tape;
+	char label[65];
+} __attribute__ ((packed));
+
+struct tape390_kekl_pair {
+	struct tape390_kekl kekl[2];
+} __attribute__ ((packed));
+
+/*
+ * The TAPE390_KEKL_SET ioctl is used to set Key Encrypting Key labels.
+ */
+#define TAPE390_KEKL_SET _IOW('d', 4, struct tape390_kekl_pair)
+
+/*
+ * The TAPE390_KEKL_QUERY ioctl is used to query Key Encrypting Key labels.
+ */
+#define TAPE390_KEKL_QUERY _IOR('d', 5, struct tape390_kekl_pair)
+
+#endif 
diff --git a/arch/s390/include/asm/termbits.h b/arch/s390/include/asm/termbits.h
new file mode 100644
index 000000000000..58731853d529
--- /dev/null
+++ b/arch/s390/include/asm/termbits.h
@@ -0,0 +1,206 @@
+/*
+ *  include/asm-s390/termbits.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/termbits.h"
+ */
+
+#ifndef __ARCH_S390_TERMBITS_H__
+#define __ARCH_S390_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define  BOTHER  0010000
+#define  B57600  0010001
+#define  B115200 0010002
+#define  B230400 0010003
+#define  B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif
diff --git a/arch/s390/include/asm/termios.h b/arch/s390/include/asm/termios.h
new file mode 100644
index 000000000000..67f66278f533
--- /dev/null
+++ b/arch/s390/include/asm/termios.h
@@ -0,0 +1,67 @@
+/*
+ *  include/asm-s390/termios.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/termios.h"
+ */
+
+#ifndef _S390_TERMIOS_H
+#define _S390_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+
+#include <asm-generic/termios.h>
+
+#endif	/* __KERNEL__ */
+
+#endif	/* _S390_TERMIOS_H */
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
new file mode 100644
index 000000000000..91a8f93ad355
--- /dev/null
+++ b/arch/s390/include/asm/thread_info.h
@@ -0,0 +1,118 @@
+/*
+ *  include/asm-s390/thread_info.h
+ *
+ *  S390 version
+ *    Copyright (C) IBM Corp. 2002,2006
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+/*
+ * Size of kernel stack for each process
+ */
+#ifndef __s390x__
+#ifndef __SMALL_STACK
+#define THREAD_ORDER 1
+#define ASYNC_ORDER  1
+#else
+#define THREAD_ORDER 0
+#define ASYNC_ORDER  0
+#endif
+#else /* __s390x__ */
+#ifndef __SMALL_STACK
+#define THREAD_ORDER 2
+#define ASYNC_ORDER  2
+#else
+#define THREAD_ORDER 1
+#define ASYNC_ORDER  1
+#endif
+#endif /* __s390x__ */
+
+#define THREAD_SIZE (PAGE_SIZE << THREAD_ORDER)
+#define ASYNC_SIZE  (PAGE_SIZE << ASYNC_ORDER)
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <asm/lowcore.h>
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants must also be changed
+ */
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	unsigned int		cpu;		/* current CPU */
+	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
+	struct restart_block	restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	return (struct thread_info *)((*(unsigned long *) __LC_KERNEL_STACK)-THREAD_SIZE);
+}
+
+#define THREAD_SIZE_ORDER THREAD_ORDER
+
+#endif
+
+/*
+ * thread information flags bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_RESTART_SVC		4	/* restart svc with new svc number */
+#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
+#define TIF_SINGLE_STEP		6	/* deliver sigtrap on return to user */
+#define TIF_MCCK_PENDING	7	/* machine check handling is pending */
+#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
+#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling 
+					   TIF_NEED_RESCHED */
+#define TIF_31BIT		18	/* 32bit process */ 
+#define TIF_MEMDIE		19
+#define TIF_RESTORE_SIGMASK	20	/* restore signal mask in do_signal() */
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_RESTART_SVC	(1<<TIF_RESTART_SVC)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_SINGLE_STEP	(1<<TIF_SINGLE_STEP)
+#define _TIF_MCCK_PENDING	(1<<TIF_MCCK_PENDING)
+#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+#define _TIF_31BIT		(1<<TIF_31BIT)
+
+#endif /* __KERNEL__ */
+
+#define PREEMPT_ACTIVE		0x4000000
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/s390/include/asm/timer.h b/arch/s390/include/asm/timer.h
new file mode 100644
index 000000000000..d98d79e35cd6
--- /dev/null
+++ b/arch/s390/include/asm/timer.h
@@ -0,0 +1,65 @@
+/*
+ *  include/asm-s390/timer.h
+ *
+ *  (C) Copyright IBM Corp. 2003,2006
+ *  Virtual CPU timer
+ *
+ *  Author: Jan Glauber (jang@de.ibm.com)
+ */
+
+#ifndef _ASM_S390_TIMER_H
+#define _ASM_S390_TIMER_H
+
+#ifdef __KERNEL__
+
+#include <linux/timer.h>
+
+#define VTIMER_MAX_SLICE (0x7ffffffffffff000LL)
+
+struct vtimer_list {
+	struct list_head entry;
+
+	int cpu;
+	__u64 expires;
+	__u64 interval;
+
+	spinlock_t lock;
+	unsigned long magic;
+
+	void (*function)(unsigned long);
+	unsigned long data;
+};
+
+/* the offset value will wrap after ca. 71 years */
+struct vtimer_queue {
+	struct list_head list;
+	spinlock_t lock;
+	__u64 to_expire;	  /* current event expire time */
+	__u64 offset;		  /* list offset to zero */
+	__u64 idle;		  /* temp var for idle */
+};
+
+extern void init_virt_timer(struct vtimer_list *timer);
+extern void add_virt_timer(void *new);
+extern void add_virt_timer_periodic(void *new);
+extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires);
+extern int del_virt_timer(struct vtimer_list *timer);
+
+extern void init_cpu_vtimer(void);
+extern void vtime_init(void);
+
+#ifdef CONFIG_VIRT_TIMER
+
+extern void vtime_start_cpu_timer(void);
+extern void vtime_stop_cpu_timer(void);
+
+#else
+
+static inline void vtime_start_cpu_timer(void) { }
+static inline void vtime_stop_cpu_timer(void) { }
+
+#endif /* CONFIG_VIRT_TIMER */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_S390_TIMER_H */
diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h
new file mode 100644
index 000000000000..d744c3d62de5
--- /dev/null
+++ b/arch/s390/include/asm/timex.h
@@ -0,0 +1,88 @@
+/*
+ *  include/asm-s390/timex.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *
+ *  Derived from "include/asm-i386/timex.h"
+ *    Copyright (C) 1992, Linus Torvalds
+ */
+
+#ifndef _ASM_S390_TIMEX_H
+#define _ASM_S390_TIMEX_H
+
+/* Inline functions for clock register access. */
+static inline int set_clock(__u64 time)
+{
+	int cc;
+
+	asm volatile(
+		"   sck   0(%2)\n"
+		"   ipm   %0\n"
+		"   srl   %0,28\n"
+		: "=d" (cc) : "m" (time), "a" (&time) : "cc");
+	return cc;
+}
+
+static inline int store_clock(__u64 *time)
+{
+	int cc;
+
+	asm volatile(
+		"   stck  0(%2)\n"
+		"   ipm   %0\n"
+		"   srl   %0,28\n"
+		: "=d" (cc), "=m" (*time) : "a" (time) : "cc");
+	return cc;
+}
+
+static inline void set_clock_comparator(__u64 time)
+{
+	asm volatile("sckc 0(%1)" : : "m" (time), "a" (&time));
+}
+
+static inline void store_clock_comparator(__u64 *time)
+{
+	asm volatile("stckc 0(%1)" : "=m" (*time) : "a" (time));
+}
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+typedef unsigned long long cycles_t;
+
+static inline unsigned long long get_clock (void)
+{
+	unsigned long long clk;
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+	asm volatile("stck %0" : "=Q" (clk) : : "cc");
+#else /* __GNUC__ */
+	asm volatile("stck 0(%1)" : "=m" (clk) : "a" (&clk) : "cc");
+#endif /* __GNUC__ */
+	return clk;
+}
+
+static inline unsigned long long get_clock_xt(void)
+{
+	unsigned char clk[16];
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+	asm volatile("stcke %0" : "=Q" (clk) : : "cc");
+#else /* __GNUC__ */
+	asm volatile("stcke 0(%1)" : "=m" (clk)
+				   : "a" (clk) : "cc");
+#endif /* __GNUC__ */
+
+	return *((unsigned long long *)&clk[1]);
+}
+
+static inline cycles_t get_cycles(void)
+{
+	return (cycles_t) get_clock() >> 2;
+}
+
+int get_sync_clock(unsigned long long *clock);
+void init_cpu_timer(void);
+unsigned long long monotonic_clock(void);
+
+#endif
diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h
new file mode 100644
index 000000000000..3d8a96d39d9d
--- /dev/null
+++ b/arch/s390/include/asm/tlb.h
@@ -0,0 +1,156 @@
+#ifndef _S390_TLB_H
+#define _S390_TLB_H
+
+/*
+ * TLB flushing on s390 is complicated. The following requirement
+ * from the principles of operation is the most arduous:
+ *
+ * "A valid table entry must not be changed while it is attached
+ * to any CPU and may be used for translation by that CPU except to
+ * (1) invalidate the entry by using INVALIDATE PAGE TABLE ENTRY,
+ * or INVALIDATE DAT TABLE ENTRY, (2) alter bits 56-63 of a page
+ * table entry, or (3) make a change by means of a COMPARE AND SWAP
+ * AND PURGE instruction that purges the TLB."
+ *
+ * The modification of a pte of an active mm struct therefore is
+ * a two step process: i) invalidate the pte, ii) store the new pte.
+ * This is true for the page protection bit as well.
+ * The only possible optimization is to flush at the beginning of
+ * a tlb_gather_mmu cycle if the mm_struct is currently not in use.
+ *
+ * Pages used for the page tables is a different story. FIXME: more
+ */
+
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <asm/processor.h>
+#include <asm/pgalloc.h>
+#include <asm/smp.h>
+#include <asm/tlbflush.h>
+
+#ifndef CONFIG_SMP
+#define TLB_NR_PTRS	1
+#else
+#define TLB_NR_PTRS	508
+#endif
+
+struct mmu_gather {
+	struct mm_struct *mm;
+	unsigned int fullmm;
+	unsigned int nr_ptes;
+	unsigned int nr_pxds;
+	void *array[TLB_NR_PTRS];
+};
+
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm,
+						unsigned int full_mm_flush)
+{
+	struct mmu_gather *tlb = &get_cpu_var(mmu_gathers);
+
+	tlb->mm = mm;
+	tlb->fullmm = full_mm_flush || (num_online_cpus() == 1) ||
+		(atomic_read(&mm->mm_users) <= 1 && mm == current->active_mm);
+	tlb->nr_ptes = 0;
+	tlb->nr_pxds = TLB_NR_PTRS;
+	if (tlb->fullmm)
+		__tlb_flush_mm(mm);
+	return tlb;
+}
+
+static inline void tlb_flush_mmu(struct mmu_gather *tlb,
+				 unsigned long start, unsigned long end)
+{
+	if (!tlb->fullmm && (tlb->nr_ptes > 0 || tlb->nr_pxds < TLB_NR_PTRS))
+		__tlb_flush_mm(tlb->mm);
+	while (tlb->nr_ptes > 0)
+		pte_free(tlb->mm, tlb->array[--tlb->nr_ptes]);
+	while (tlb->nr_pxds < TLB_NR_PTRS)
+		/* pgd_free frees the pointer as region or segment table */
+		pgd_free(tlb->mm, tlb->array[tlb->nr_pxds++]);
+}
+
+static inline void tlb_finish_mmu(struct mmu_gather *tlb,
+				  unsigned long start, unsigned long end)
+{
+	tlb_flush_mmu(tlb, start, end);
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+
+	put_cpu_var(mmu_gathers);
+}
+
+/*
+ * Release the page cache reference for a pte removed by
+ * tlb_ptep_clear_flush. In both flush modes the tlb fo a page cache page
+ * has already been freed, so just do free_page_and_swap_cache.
+ */
+static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
+{
+	free_page_and_swap_cache(page);
+}
+
+/*
+ * pte_free_tlb frees a pte table and clears the CRSTE for the
+ * page table from the tlb.
+ */
+static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte)
+{
+	if (!tlb->fullmm) {
+		tlb->array[tlb->nr_ptes++] = pte;
+		if (tlb->nr_ptes >= tlb->nr_pxds)
+			tlb_flush_mmu(tlb, 0, 0);
+	} else
+		pte_free(tlb->mm, pte);
+}
+
+/*
+ * pmd_free_tlb frees a pmd table and clears the CRSTE for the
+ * segment table entry from the tlb.
+ * If the mm uses a two level page table the single pmd is freed
+ * as the pgd. pmd_free_tlb checks the asce_limit against 2GB
+ * to avoid the double free of the pmd in this case.
+ */
+static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+{
+#ifdef __s390x__
+	if (tlb->mm->context.asce_limit <= (1UL << 31))
+		return;
+	if (!tlb->fullmm) {
+		tlb->array[--tlb->nr_pxds] = pmd;
+		if (tlb->nr_ptes >= tlb->nr_pxds)
+			tlb_flush_mmu(tlb, 0, 0);
+	} else
+		pmd_free(tlb->mm, pmd);
+#endif
+}
+
+/*
+ * pud_free_tlb frees a pud table and clears the CRSTE for the
+ * region third table entry from the tlb.
+ * If the mm uses a three level page table the single pud is freed
+ * as the pgd. pud_free_tlb checks the asce_limit against 4TB
+ * to avoid the double free of the pud in this case.
+ */
+static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
+{
+#ifdef __s390x__
+	if (tlb->mm->context.asce_limit <= (1UL << 42))
+		return;
+	if (!tlb->fullmm) {
+		tlb->array[--tlb->nr_pxds] = pud;
+		if (tlb->nr_ptes >= tlb->nr_pxds)
+			tlb_flush_mmu(tlb, 0, 0);
+	} else
+		pud_free(tlb->mm, pud);
+#endif
+}
+
+#define tlb_start_vma(tlb, vma)			do { } while (0)
+#define tlb_end_vma(tlb, vma)			do { } while (0)
+#define tlb_remove_tlb_entry(tlb, ptep, addr)	do { } while (0)
+#define tlb_migrate_finish(mm)			do { } while (0)
+
+#endif /* _S390_TLB_H */
diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h
new file mode 100644
index 000000000000..d60394b9745e
--- /dev/null
+++ b/arch/s390/include/asm/tlbflush.h
@@ -0,0 +1,140 @@
+#ifndef _S390_TLBFLUSH_H
+#define _S390_TLBFLUSH_H
+
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <asm/processor.h>
+#include <asm/pgalloc.h>
+
+/*
+ * Flush all tlb entries on the local cpu.
+ */
+static inline void __tlb_flush_local(void)
+{
+	asm volatile("ptlb" : : : "memory");
+}
+
+#ifdef CONFIG_SMP
+/*
+ * Flush all tlb entries on all cpus.
+ */
+void smp_ptlb_all(void);
+
+static inline void __tlb_flush_global(void)
+{
+	register unsigned long reg2 asm("2");
+	register unsigned long reg3 asm("3");
+	register unsigned long reg4 asm("4");
+	long dummy;
+
+#ifndef __s390x__
+	if (!MACHINE_HAS_CSP) {
+		smp_ptlb_all();
+		return;
+	}
+#endif /* __s390x__ */
+
+	dummy = 0;
+	reg2 = reg3 = 0;
+	reg4 = ((unsigned long) &dummy) + 1;
+	asm volatile(
+		"	csp	%0,%2"
+		: : "d" (reg2), "d" (reg3), "d" (reg4), "m" (dummy) : "cc" );
+}
+
+static inline void __tlb_flush_full(struct mm_struct *mm)
+{
+	cpumask_t local_cpumask;
+
+	preempt_disable();
+	/*
+	 * If the process only ran on the local cpu, do a local flush.
+	 */
+	local_cpumask = cpumask_of_cpu(smp_processor_id());
+	if (cpus_equal(mm->cpu_vm_mask, local_cpumask))
+		__tlb_flush_local();
+	else
+		__tlb_flush_global();
+	preempt_enable();
+}
+#else
+#define __tlb_flush_full(mm)	__tlb_flush_local()
+#endif
+
+/*
+ * Flush all tlb entries of a page table on all cpus.
+ */
+static inline void __tlb_flush_idte(unsigned long asce)
+{
+	asm volatile(
+		"	.insn	rrf,0xb98e0000,0,%0,%1,0"
+		: : "a" (2048), "a" (asce) : "cc" );
+}
+
+static inline void __tlb_flush_mm(struct mm_struct * mm)
+{
+	if (unlikely(cpus_empty(mm->cpu_vm_mask)))
+		return;
+	/*
+	 * If the machine has IDTE we prefer to do a per mm flush
+	 * on all cpus instead of doing a local flush if the mm
+	 * only ran on the local cpu.
+	 */
+	if (MACHINE_HAS_IDTE) {
+		if (mm->context.noexec)
+			__tlb_flush_idte((unsigned long)
+					 get_shadow_table(mm->pgd) |
+					 mm->context.asce_bits);
+		__tlb_flush_idte((unsigned long) mm->pgd |
+				 mm->context.asce_bits);
+		return;
+	}
+	__tlb_flush_full(mm);
+}
+
+static inline void __tlb_flush_mm_cond(struct mm_struct * mm)
+{
+	if (atomic_read(&mm->mm_users) <= 1 && mm == current->active_mm)
+		__tlb_flush_mm(mm);
+}
+
+/*
+ * TLB flushing:
+ *  flush_tlb() - flushes the current mm struct TLBs
+ *  flush_tlb_all() - flushes all processes TLBs
+ *  flush_tlb_mm(mm) - flushes the specified mm context TLB's
+ *  flush_tlb_page(vma, vmaddr) - flushes one page
+ *  flush_tlb_range(vma, start, end) - flushes a range of pages
+ *  flush_tlb_kernel_range(start, end) - flushes a range of kernel pages
+ */
+
+/*
+ * flush_tlb_mm goes together with ptep_set_wrprotect for the
+ * copy_page_range operation and flush_tlb_range is related to
+ * ptep_get_and_clear for change_protection. ptep_set_wrprotect and
+ * ptep_get_and_clear do not flush the TLBs directly if the mm has
+ * only one user. At the end of the update the flush_tlb_mm and
+ * flush_tlb_range functions need to do the flush.
+ */
+#define flush_tlb()				do { } while (0)
+#define flush_tlb_all()				do { } while (0)
+#define flush_tlb_page(vma, addr)		do { } while (0)
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	__tlb_flush_mm_cond(mm);
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+	__tlb_flush_mm_cond(vma->vm_mm);
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+	__tlb_flush_mm(&init_mm);
+}
+
+#endif /* _S390_TLBFLUSH_H */
diff --git a/arch/s390/include/asm/todclk.h b/arch/s390/include/asm/todclk.h
new file mode 100644
index 000000000000..c7f62055488a
--- /dev/null
+++ b/arch/s390/include/asm/todclk.h
@@ -0,0 +1,23 @@
+/*
+ * File...........: linux/include/asm/todclk.h
+ * Author(s)......: Holger Smolinski <Holger.Smolinski@de.ibm.com>
+ * Bugreports.to..: <Linux390@de.ibm.com>
+ * (C) IBM Corporation, IBM Deutschland Entwicklung GmbH, 1999,2000
+ *
+ * History of changes (starts July 2000)
+ */
+
+#ifndef __ASM_TODCLK_H
+#define __ASM_TODCLK_H
+
+#ifdef __KERNEL__
+
+#define TOD_uSEC (0x1000ULL)
+#define TOD_mSEC (1000 * TOD_uSEC)
+#define TOD_SEC (1000 * TOD_mSEC)
+#define TOD_MIN (60 * TOD_SEC)
+#define TOD_HOUR (60 * TOD_MIN)
+
+#endif
+
+#endif
diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h
new file mode 100644
index 000000000000..d96c91643458
--- /dev/null
+++ b/arch/s390/include/asm/topology.h
@@ -0,0 +1,33 @@
+#ifndef _ASM_S390_TOPOLOGY_H
+#define _ASM_S390_TOPOLOGY_H
+
+#include <linux/cpumask.h>
+
+#define mc_capable()	(1)
+
+cpumask_t cpu_coregroup_map(unsigned int cpu);
+
+extern cpumask_t cpu_core_map[NR_CPUS];
+
+#define topology_core_siblings(cpu)	(cpu_core_map[cpu])
+
+int topology_set_cpu_management(int fc);
+void topology_schedule_update(void);
+
+#define POLARIZATION_UNKNWN	(-1)
+#define POLARIZATION_HRZ	(0)
+#define POLARIZATION_VL		(1)
+#define POLARIZATION_VM		(2)
+#define POLARIZATION_VH		(3)
+
+#ifdef CONFIG_SMP
+void s390_init_cpu_topology(void);
+#else
+static inline void s390_init_cpu_topology(void)
+{
+};
+#endif
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_S390_TOPOLOGY_H */
diff --git a/arch/s390/include/asm/types.h b/arch/s390/include/asm/types.h
new file mode 100644
index 000000000000..41c547656130
--- /dev/null
+++ b/arch/s390/include/asm/types.h
@@ -0,0 +1,63 @@
+/*
+ *  include/asm-s390/types.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/types.h"
+ */
+
+#ifndef _S390_TYPES_H
+#define _S390_TYPES_H
+
+#ifndef __s390x__
+# include <asm-generic/int-ll64.h>
+#else
+# include <asm-generic/int-l64.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+/* A address type so that arithmetic can be done on it & it can be upgraded to
+   64 bit when necessary 
+*/
+typedef unsigned long addr_t; 
+typedef __signed__ long saddr_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#ifndef __s390x__
+#define BITS_PER_LONG 32
+#else
+#define BITS_PER_LONG 64
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef u64 dma64_addr_t;
+#ifdef __s390x__
+/* DMA addresses come in 32-bit and 64-bit flavours. */
+typedef u64 dma_addr_t;
+#else
+typedef u32 dma_addr_t;
+#endif
+
+#ifndef __s390x__
+typedef union {
+	unsigned long long pair;
+	struct {
+		unsigned long even;
+		unsigned long odd;
+	} subreg;
+} register_pair;
+
+#endif /* ! __s390x__   */
+#endif /* __ASSEMBLY__  */
+#endif /* __KERNEL__    */
+#endif /* _S390_TYPES_H */
diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
new file mode 100644
index 000000000000..0235970278f0
--- /dev/null
+++ b/arch/s390/include/asm/uaccess.h
@@ -0,0 +1,363 @@
+/*
+ *  include/asm-s390/uaccess.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Hartmut Penner (hp@de.ibm.com),
+ *               Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *
+ *  Derived from "include/asm-i386/uaccess.h"
+ */
+#ifndef __S390_UACCESS_H
+#define __S390_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/errno.h>
+
+#define VERIFY_READ     0
+#define VERIFY_WRITE    1
+
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(a)  ((mm_segment_t) { (a) })
+
+
+#define KERNEL_DS       MAKE_MM_SEG(0)
+#define USER_DS         MAKE_MM_SEG(1)
+
+#define get_ds()        (KERNEL_DS)
+#define get_fs()        (current->thread.mm_segment)
+
+#define set_fs(x) \
+({									\
+	unsigned long __pto;						\
+	current->thread.mm_segment = (x);				\
+	__pto = current->thread.mm_segment.ar4 ?			\
+		S390_lowcore.user_asce : S390_lowcore.kernel_asce;	\
+	__ctl_load(__pto, 7, 7);					\
+})
+
+#define segment_eq(a,b) ((a).ar4 == (b).ar4)
+
+
+static inline int __access_ok(const void __user *addr, unsigned long size)
+{
+	return 1;
+}
+#define access_ok(type,addr,size) __access_ok(addr,size)
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+        unsigned long insn, fixup;
+};
+
+struct uaccess_ops {
+	size_t (*copy_from_user)(size_t, const void __user *, void *);
+	size_t (*copy_from_user_small)(size_t, const void __user *, void *);
+	size_t (*copy_to_user)(size_t, void __user *, const void *);
+	size_t (*copy_to_user_small)(size_t, void __user *, const void *);
+	size_t (*copy_in_user)(size_t, void __user *, const void __user *);
+	size_t (*clear_user)(size_t, void __user *);
+	size_t (*strnlen_user)(size_t, const char __user *);
+	size_t (*strncpy_from_user)(size_t, const char __user *, char *);
+	int (*futex_atomic_op)(int op, int __user *, int oparg, int *old);
+	int (*futex_atomic_cmpxchg)(int __user *, int old, int new);
+};
+
+extern struct uaccess_ops uaccess;
+extern struct uaccess_ops uaccess_std;
+extern struct uaccess_ops uaccess_mvcos;
+extern struct uaccess_ops uaccess_mvcos_switch;
+extern struct uaccess_ops uaccess_pt;
+
+static inline int __put_user_fn(size_t size, void __user *ptr, void *x)
+{
+	size = uaccess.copy_to_user_small(size, ptr, x);
+	return size ? -EFAULT : size;
+}
+
+static inline int __get_user_fn(size_t size, const void __user *ptr, void *x)
+{
+	size = uaccess.copy_from_user_small(size, ptr, x);
+	return size ? -EFAULT : size;
+}
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+#define __put_user(x, ptr) \
+({								\
+	__typeof__(*(ptr)) __x = (x);				\
+	int __pu_err = -EFAULT;					\
+        __chk_user_ptr(ptr);                                    \
+	switch (sizeof (*(ptr))) {				\
+	case 1:							\
+	case 2:							\
+	case 4:							\
+	case 8:							\
+		__pu_err = __put_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		break;						\
+	default:						\
+		__put_user_bad();				\
+		break;						\
+	 }							\
+	__pu_err;						\
+})
+
+#define put_user(x, ptr)					\
+({								\
+	might_sleep();						\
+	__put_user(x, ptr);					\
+})
+
+
+extern int __put_user_bad(void) __attribute__((noreturn));
+
+#define __get_user(x, ptr)					\
+({								\
+	int __gu_err = -EFAULT;					\
+	__chk_user_ptr(ptr);					\
+	switch (sizeof(*(ptr))) {				\
+	case 1: {						\
+		unsigned char __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 2: {						\
+		unsigned short __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 4: {						\
+		unsigned int __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	case 8: {						\
+		unsigned long long __x;				\
+		__gu_err = __get_user_fn(sizeof (*(ptr)),	\
+					 ptr, &__x);		\
+		(x) = *(__force __typeof__(*(ptr)) *) &__x;	\
+		break;						\
+	};							\
+	default:						\
+		__get_user_bad();				\
+		break;						\
+	}							\
+	__gu_err;						\
+})
+
+#define get_user(x, ptr)					\
+({								\
+	might_sleep();						\
+	__get_user(x, ptr);					\
+})
+
+extern int __get_user_bad(void) __attribute__((noreturn));
+
+#define __put_user_unaligned __put_user
+#define __get_user_unaligned __get_user
+
+/**
+ * __copy_to_user: - Copy a block of data into user space, with less checking.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+static inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	if (__builtin_constant_p(n) && (n <= 256))
+		return uaccess.copy_to_user_small(n, to, from);
+	else
+		return uaccess.copy_to_user(n, to, from);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+/**
+ * copy_to_user: - Copy a block of data into user space.
+ * @to:   Destination address, in user space.
+ * @from: Source address, in kernel space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from kernel space to user space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ */
+static inline unsigned long __must_check
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = __copy_to_user(to, from, n);
+	return n;
+}
+
+/**
+ * __copy_from_user: - Copy a block of data from user space, with less checking.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.  Caller must check
+ * the specified block with access_ok() before calling this function.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+static inline unsigned long __must_check
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	if (__builtin_constant_p(n) && (n <= 256))
+		return uaccess.copy_from_user_small(n, from, to);
+	else
+		return uaccess.copy_from_user(n, from, to);
+}
+
+/**
+ * copy_from_user: - Copy a block of data from user space.
+ * @to:   Destination address, in kernel space.
+ * @from: Source address, in user space.
+ * @n:    Number of bytes to copy.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Copy data from user space to kernel space.
+ *
+ * Returns number of bytes that could not be copied.
+ * On success, this will be zero.
+ *
+ * If some data could not be copied, this function will pad the copied
+ * data to the requested size using zero bytes.
+ */
+static inline unsigned long __must_check
+copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_READ, from, n))
+		n = __copy_from_user(to, from, n);
+	else
+		memset(to, 0, n);
+	return n;
+}
+
+static inline unsigned long __must_check
+__copy_in_user(void __user *to, const void __user *from, unsigned long n)
+{
+	return uaccess.copy_in_user(n, to, from);
+}
+
+static inline unsigned long __must_check
+copy_in_user(void __user *to, const void __user *from, unsigned long n)
+{
+	might_sleep();
+	if (__access_ok(from,n) && __access_ok(to,n))
+		n = __copy_in_user(to, from, n);
+	return n;
+}
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+static inline long __must_check
+strncpy_from_user(char *dst, const char __user *src, long count)
+{
+        long res = -EFAULT;
+        might_sleep();
+        if (access_ok(VERIFY_READ, src, 1))
+		res = uaccess.strncpy_from_user(count, src, dst);
+        return res;
+}
+
+static inline unsigned long
+strnlen_user(const char __user * src, unsigned long n)
+{
+	might_sleep();
+	return uaccess.strnlen_user(n, src);
+}
+
+/**
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+#define strlen_user(str) strnlen_user(str, ~0UL)
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long __must_check
+__clear_user(void __user *to, unsigned long n)
+{
+	return uaccess.clear_user(n, to);
+}
+
+static inline unsigned long __must_check
+clear_user(void __user *to, unsigned long n)
+{
+	might_sleep();
+	if (access_ok(VERIFY_WRITE, to, n))
+		n = uaccess.clear_user(n, to);
+	return n;
+}
+
+#endif /* __S390_UACCESS_H */
diff --git a/arch/s390/include/asm/ucontext.h b/arch/s390/include/asm/ucontext.h
new file mode 100644
index 000000000000..d69bec0b03f5
--- /dev/null
+++ b/arch/s390/include/asm/ucontext.h
@@ -0,0 +1,20 @@
+/*
+ *  include/asm-s390/ucontext.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/ucontext.h"
+ */
+
+#ifndef _ASM_S390_UCONTEXT_H
+#define _ASM_S390_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	_sigregs          uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* !_ASM_S390_UCONTEXT_H */
diff --git a/arch/s390/include/asm/unaligned.h b/arch/s390/include/asm/unaligned.h
new file mode 100644
index 000000000000..da9627afe5d8
--- /dev/null
+++ b/arch/s390/include/asm/unaligned.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_S390_UNALIGNED_H
+#define _ASM_S390_UNALIGNED_H
+
+/*
+ * The S390 can do unaligned accesses itself. 
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+
+#endif /* _ASM_S390_UNALIGNED_H */
diff --git a/arch/s390/include/asm/unistd.h b/arch/s390/include/asm/unistd.h
new file mode 100644
index 000000000000..c8ad350d1444
--- /dev/null
+++ b/arch/s390/include/asm/unistd.h
@@ -0,0 +1,411 @@
+/*
+ *  include/asm-s390/unistd.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/unistd.h"
+ */
+
+#ifndef _ASM_S390_UNISTD_H_
+#define _ASM_S390_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_exit                 1
+#define __NR_fork                 2
+#define __NR_read                 3
+#define __NR_write                4
+#define __NR_open                 5
+#define __NR_close                6
+#define __NR_restart_syscall	  7
+#define __NR_creat                8
+#define __NR_link                 9
+#define __NR_unlink              10
+#define __NR_execve              11
+#define __NR_chdir               12
+#define __NR_mknod               14
+#define __NR_chmod               15
+#define __NR_lseek               19
+#define __NR_getpid              20
+#define __NR_mount               21
+#define __NR_umount              22
+#define __NR_ptrace              26
+#define __NR_alarm               27
+#define __NR_pause               29
+#define __NR_utime               30
+#define __NR_access              33
+#define __NR_nice                34
+#define __NR_sync                36
+#define __NR_kill                37
+#define __NR_rename              38
+#define __NR_mkdir               39
+#define __NR_rmdir               40
+#define __NR_dup                 41
+#define __NR_pipe                42
+#define __NR_times               43
+#define __NR_brk                 45
+#define __NR_signal              48
+#define __NR_acct                51
+#define __NR_umount2             52
+#define __NR_ioctl               54
+#define __NR_fcntl               55
+#define __NR_setpgid             57
+#define __NR_umask               60
+#define __NR_chroot              61
+#define __NR_ustat               62
+#define __NR_dup2                63
+#define __NR_getppid             64
+#define __NR_getpgrp             65
+#define __NR_setsid              66
+#define __NR_sigaction           67
+#define __NR_sigsuspend          72
+#define __NR_sigpending          73
+#define __NR_sethostname         74
+#define __NR_setrlimit           75
+#define __NR_getrusage           77
+#define __NR_gettimeofday        78
+#define __NR_settimeofday        79
+#define __NR_symlink             83
+#define __NR_readlink            85
+#define __NR_uselib              86
+#define __NR_swapon              87
+#define __NR_reboot              88
+#define __NR_readdir             89
+#define __NR_mmap                90
+#define __NR_munmap              91
+#define __NR_truncate            92
+#define __NR_ftruncate           93
+#define __NR_fchmod              94
+#define __NR_getpriority         96
+#define __NR_setpriority         97
+#define __NR_statfs              99
+#define __NR_fstatfs            100
+#define __NR_socketcall         102
+#define __NR_syslog             103
+#define __NR_setitimer          104
+#define __NR_getitimer          105
+#define __NR_stat               106
+#define __NR_lstat              107
+#define __NR_fstat              108
+#define __NR_lookup_dcookie     110
+#define __NR_vhangup            111
+#define __NR_idle               112
+#define __NR_wait4              114
+#define __NR_swapoff            115
+#define __NR_sysinfo            116
+#define __NR_ipc                117
+#define __NR_fsync              118
+#define __NR_sigreturn          119
+#define __NR_clone              120
+#define __NR_setdomainname      121
+#define __NR_uname              122
+#define __NR_adjtimex           124
+#define __NR_mprotect           125
+#define __NR_sigprocmask        126
+#define __NR_create_module      127
+#define __NR_init_module        128
+#define __NR_delete_module      129
+#define __NR_get_kernel_syms    130
+#define __NR_quotactl           131
+#define __NR_getpgid            132
+#define __NR_fchdir             133
+#define __NR_bdflush            134
+#define __NR_sysfs              135
+#define __NR_personality        136
+#define __NR_afs_syscall        137 /* Syscall for Andrew File System */
+#define __NR_getdents           141
+#define __NR_flock              143
+#define __NR_msync              144
+#define __NR_readv              145
+#define __NR_writev             146
+#define __NR_getsid             147
+#define __NR_fdatasync          148
+#define __NR__sysctl            149
+#define __NR_mlock              150
+#define __NR_munlock            151
+#define __NR_mlockall           152
+#define __NR_munlockall         153
+#define __NR_sched_setparam             154
+#define __NR_sched_getparam             155
+#define __NR_sched_setscheduler         156
+#define __NR_sched_getscheduler         157
+#define __NR_sched_yield                158
+#define __NR_sched_get_priority_max     159
+#define __NR_sched_get_priority_min     160
+#define __NR_sched_rr_get_interval      161
+#define __NR_nanosleep          162
+#define __NR_mremap             163
+#define __NR_query_module       167
+#define __NR_poll               168
+#define __NR_nfsservctl         169
+#define __NR_prctl              172
+#define __NR_rt_sigreturn       173
+#define __NR_rt_sigaction       174
+#define __NR_rt_sigprocmask     175
+#define __NR_rt_sigpending      176
+#define __NR_rt_sigtimedwait    177
+#define __NR_rt_sigqueueinfo    178
+#define __NR_rt_sigsuspend      179
+#define __NR_pread64            180
+#define __NR_pwrite64           181
+#define __NR_getcwd             183
+#define __NR_capget             184
+#define __NR_capset             185
+#define __NR_sigaltstack        186
+#define __NR_sendfile           187
+#define __NR_getpmsg		188
+#define __NR_putpmsg		189
+#define __NR_vfork		190
+#define __NR_pivot_root         217
+#define __NR_mincore            218
+#define __NR_madvise            219
+#define __NR_getdents64		220
+#define __NR_readahead		222
+#define __NR_setxattr		224
+#define __NR_lsetxattr		225
+#define __NR_fsetxattr		226
+#define __NR_getxattr		227
+#define __NR_lgetxattr		228
+#define __NR_fgetxattr		229
+#define __NR_listxattr		230
+#define __NR_llistxattr		231
+#define __NR_flistxattr		232
+#define __NR_removexattr	233
+#define __NR_lremovexattr	234
+#define __NR_fremovexattr	235
+#define __NR_gettid		236
+#define __NR_tkill		237
+#define __NR_futex		238
+#define __NR_sched_setaffinity	239
+#define __NR_sched_getaffinity	240
+#define __NR_tgkill		241
+/* Number 242 is reserved for tux */
+#define __NR_io_setup		243
+#define __NR_io_destroy		244
+#define __NR_io_getevents	245
+#define __NR_io_submit		246
+#define __NR_io_cancel		247
+#define __NR_exit_group		248
+#define __NR_epoll_create	249
+#define __NR_epoll_ctl		250
+#define __NR_epoll_wait		251
+#define __NR_set_tid_address	252
+#define __NR_fadvise64		253
+#define __NR_timer_create	254
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+/* Number 263 is reserved for vserver */
+#define __NR_statfs64		265
+#define __NR_fstatfs64		266
+#define __NR_remap_file_pages	267
+/* Number 268 is reserved for new sys_mbind */
+/* Number 269 is reserved for new sys_get_mempolicy */
+/* Number 270 is reserved for new sys_set_mempolicy */
+#define __NR_mq_open		271
+#define __NR_mq_unlink		272
+#define __NR_mq_timedsend	273
+#define __NR_mq_timedreceive	274
+#define __NR_mq_notify		275
+#define __NR_mq_getsetattr	276
+#define __NR_kexec_load		277
+#define __NR_add_key		278
+#define __NR_request_key	279
+#define __NR_keyctl		280
+#define __NR_waitid		281
+#define __NR_ioprio_set		282
+#define __NR_ioprio_get		283
+#define __NR_inotify_init	284
+#define __NR_inotify_add_watch	285
+#define __NR_inotify_rm_watch	286
+/* Number 287 is reserved for new sys_migrate_pages */
+#define __NR_openat		288
+#define __NR_mkdirat		289
+#define __NR_mknodat		290
+#define __NR_fchownat		291
+#define __NR_futimesat		292
+#define __NR_unlinkat		294
+#define __NR_renameat		295
+#define __NR_linkat		296
+#define __NR_symlinkat		297
+#define __NR_readlinkat		298
+#define __NR_fchmodat		299
+#define __NR_faccessat		300
+#define __NR_pselect6		301
+#define __NR_ppoll		302
+#define __NR_unshare		303
+#define __NR_set_robust_list	304
+#define __NR_get_robust_list	305
+#define __NR_splice		306
+#define __NR_sync_file_range	307
+#define __NR_tee		308
+#define __NR_vmsplice		309
+/* Number 310 is reserved for new sys_move_pages */
+#define __NR_getcpu		311
+#define __NR_epoll_pwait	312
+#define __NR_utimes		313
+#define __NR_fallocate		314
+#define __NR_utimensat		315
+#define __NR_signalfd		316
+#define __NR_timerfd		317
+#define __NR_eventfd		318
+#define __NR_timerfd_create	319
+#define __NR_timerfd_settime	320
+#define __NR_timerfd_gettime	321
+#define __NR_signalfd4		322
+#define __NR_eventfd2		323
+#define __NR_inotify_init1	324
+#define __NR_pipe2		325
+#define __NR_dup3		326
+#define __NR_epoll_create1	327
+#define NR_syscalls 328
+
+/* 
+ * There are some system calls that are not present on 64 bit, some
+ * have a different name although they do the same (e.g. __NR_chown32
+ * is __NR_chown on 64 bit).
+ */
+#ifndef __s390x__
+
+#define __NR_time		 13
+#define __NR_lchown		 16
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_getrlimit		 76
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_fchown		 95
+#define __NR_ioperm		101
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR__newselect 	142
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_chown		182
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_fcntl64		221
+#define __NR_sendfile64		223
+#define __NR_fadvise64_64	264
+#define __NR_fstatat64		293
+
+#else
+
+#define __NR_select		142
+#define __NR_getrlimit		191	/* SuS compliant getrlimit */
+#define __NR_lchown  		198
+#define __NR_getuid  		199
+#define __NR_getgid  		200
+#define __NR_geteuid  		201
+#define __NR_getegid  		202
+#define __NR_setreuid  		203
+#define __NR_setregid  		204
+#define __NR_getgroups  	205
+#define __NR_setgroups  	206
+#define __NR_fchown  		207
+#define __NR_setresuid  	208
+#define __NR_getresuid  	209
+#define __NR_setresgid  	210
+#define __NR_getresgid  	211
+#define __NR_chown  		212
+#define __NR_setuid  		213
+#define __NR_setgid  		214
+#define __NR_setfsuid  		215
+#define __NR_setfsgid  		216
+#define __NR_newfstatat		293
+
+#endif
+
+#ifdef __KERNEL__
+
+#ifndef CONFIG_64BIT
+#define __IGNORE_select
+#else
+#define __IGNORE_time
+#endif
+
+/* Ignore NUMA system calls. Not wired up on s390. */
+#define __IGNORE_mbind
+#define __IGNORE_get_mempolicy
+#define __IGNORE_set_mempolicy
+#define __IGNORE_migrate_pages
+#define __IGNORE_move_pages
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+# ifndef CONFIG_64BIT
+#   define __ARCH_WANT_STAT64
+#   define __ARCH_WANT_SYS_TIME
+# endif
+# ifdef CONFIG_COMPAT
+#   define __ARCH_WANT_COMPAT_SYS_TIME
+#   define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+# endif
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_S390_UNISTD_H_ */
diff --git a/arch/s390/include/asm/user.h b/arch/s390/include/asm/user.h
new file mode 100644
index 000000000000..1b050e35fdc6
--- /dev/null
+++ b/arch/s390/include/asm/user.h
@@ -0,0 +1,76 @@
+/*
+ *  include/asm-s390/user.h
+ *
+ *  S390 version
+ *
+ *  Derived from "include/asm-i386/usr.h"
+ */
+
+#ifndef _S390_USER_H
+#define _S390_USER_H
+
+#include <asm/page.h>
+#include <asm/ptrace.h>
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user (under
+   linux we use the 'trad-core' bfd).  There are quite a number of
+   obstacles to being able to view the contents of the floating point
+   registers, and until these are solved you will not be able to view the
+   contents of them.  Actually, you can read in the core file and look at
+   the contents of the user struct to find out what the floating point
+   registers contain.
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+
+/*
+ * This is the old layout of "struct pt_regs", and
+ * is still the layout used by user mode (the new
+ * pt_regs doesn't have all registers as the kernel
+ * doesn't use the extra segment registers)
+ */
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+struct user {
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+  struct user_regs_struct regs;		/* Where the registers are actually stored */
+/* The rest of this junk is to help gdb figure out what goes where */
+  unsigned long int u_tsize;	/* Text segment size (pages). */
+  unsigned long int u_dsize;	/* Data segment size (pages). */
+  unsigned long int u_ssize;	/* Stack segment size (pages). */
+  unsigned long start_code;     /* Starting virtual address of text. */
+  unsigned long start_stack;	/* Starting virtual address of stack area.
+				   This is actually the bottom of the stack,
+				   the top of the stack is always found in the
+				   esp register.  */
+  long int signal;     		/* Signal that caused the core dump. */
+  unsigned long u_ar0;		/* Used by gdb to help find the values for */
+				/* the registers. */
+  unsigned long magic;		/* To uniquely identify a core file */
+  char u_comm[32];		/* User command that was responsible */
+};
+#define NBPG PAGE_SIZE
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif /* _S390_USER_H */
diff --git a/arch/s390/include/asm/vtoc.h b/arch/s390/include/asm/vtoc.h
new file mode 100644
index 000000000000..3a5267d90d29
--- /dev/null
+++ b/arch/s390/include/asm/vtoc.h
@@ -0,0 +1,203 @@
+/*
+ * include/asm-s390/vtoc.h
+ *
+ * This file contains volume label definitions for DASD devices.
+ *
+ * (C) Copyright IBM Corp. 2005
+ *
+ * Author(s): Volker Sameske <sameske@de.ibm.com>
+ *
+ */
+
+#ifndef _ASM_S390_VTOC_H
+#define _ASM_S390_VTOC_H
+
+#include <linux/types.h>
+
+struct vtoc_ttr
+{
+	__u16 tt;
+	__u8 r;
+} __attribute__ ((packed));
+
+struct vtoc_cchhb
+{
+	__u16 cc;
+	__u16 hh;
+	__u8 b;
+} __attribute__ ((packed));
+
+struct vtoc_cchh
+{
+	__u16 cc;
+	__u16 hh;
+} __attribute__ ((packed));
+
+struct vtoc_labeldate
+{
+	__u8 year;
+	__u16 day;
+} __attribute__ ((packed));
+
+struct vtoc_volume_label
+{
+	char volkey[4];		/* volume key = volume label */
+	char vollbl[4];		/* volume label */
+	char volid[6];		/* volume identifier */
+	__u8 security;		/* security byte */
+	struct vtoc_cchhb vtoc;	/* VTOC address */
+	char res1[5];		/* reserved */
+	char cisize[4];		/* CI-size for FBA,... */
+				/* ...blanks for CKD */
+	char blkperci[4];	/* no of blocks per CI (FBA), blanks for CKD */
+	char labperci[4];	/* no of labels per CI (FBA), blanks for CKD */
+	char res2[4];		/* reserved */
+	char lvtoc[14];		/* owner code for LVTOC */
+	char res3[29];		/* reserved */
+} __attribute__ ((packed));
+
+struct vtoc_extent
+{
+	__u8 typeind;			/* extent type indicator */
+	__u8 seqno;			/* extent sequence number */
+	struct vtoc_cchh llimit;	/* starting point of this extent */
+	struct vtoc_cchh ulimit;	/* ending point of this extent */
+} __attribute__ ((packed));
+
+struct vtoc_dev_const
+{
+	__u16 DS4DSCYL;	/* number of logical cyls */
+	__u16 DS4DSTRK;	/* number of tracks in a logical cylinder */
+	__u16 DS4DEVTK;	/* device track length */
+	__u8 DS4DEVI;	/* non-last keyed record overhead */
+	__u8 DS4DEVL;	/* last keyed record overhead */
+	__u8 DS4DEVK;	/* non-keyed record overhead differential */
+	__u8 DS4DEVFG;	/* flag byte */
+	__u16 DS4DEVTL;	/* device tolerance */
+	__u8 DS4DEVDT;	/* number of DSCB's per track */
+	__u8 DS4DEVDB;	/* number of directory blocks per track */
+} __attribute__ ((packed));
+
+struct vtoc_format1_label
+{
+	char DS1DSNAM[44];	/* data set name */
+	__u8 DS1FMTID;		/* format identifier */
+	char DS1DSSN[6];	/* data set serial number */
+	__u16 DS1VOLSQ;		/* volume sequence number */
+	struct vtoc_labeldate DS1CREDT; /* creation date: ydd */
+	struct vtoc_labeldate DS1EXPDT; /* expiration date */
+	__u8 DS1NOEPV;		/* number of extents on volume */
+	__u8 DS1NOBDB;		/* no. of bytes used in last direction blk */
+	__u8 DS1FLAG1;		/* flag 1 */
+	char DS1SYSCD[13];	/* system code */
+	struct vtoc_labeldate DS1REFD; /* date last referenced	*/
+	__u8 DS1SMSFG;		/* system managed storage indicators */
+	__u8 DS1SCXTF;		/* sec. space extension flag byte */
+	__u16 DS1SCXTV;		/* secondary space extension value */
+	__u8 DS1DSRG1;		/* data set organisation byte 1 */
+	__u8 DS1DSRG2;		/* data set organisation byte 2 */
+	__u8 DS1RECFM;		/* record format */
+	__u8 DS1OPTCD;		/* option code */
+	__u16 DS1BLKL;		/* block length */
+	__u16 DS1LRECL;		/* record length */
+	__u8 DS1KEYL;		/* key length */
+	__u16 DS1RKP;		/* relative key position */
+	__u8 DS1DSIND;		/* data set indicators */
+	__u8 DS1SCAL1;		/* secondary allocation flag byte */
+	char DS1SCAL3[3];	/* secondary allocation quantity */
+	struct vtoc_ttr DS1LSTAR; /* last used track and block on track */
+	__u16 DS1TRBAL;		/* space remaining on last used track */
+	__u16 res1;		/* reserved */
+	struct vtoc_extent DS1EXT1; /* first extent description */
+	struct vtoc_extent DS1EXT2; /* second extent description */
+	struct vtoc_extent DS1EXT3; /* third extent description */
+	struct vtoc_cchhb DS1PTRDS; /* possible pointer to f2 or f3 DSCB */
+} __attribute__ ((packed));
+
+struct vtoc_format4_label
+{
+	char DS4KEYCD[44];	/* key code for VTOC labels: 44 times 0x04 */
+	__u8 DS4IDFMT;		/* format identifier */
+	struct vtoc_cchhb DS4HPCHR; /* highest address of a format 1 DSCB */
+	__u16 DS4DSREC;		/* number of available DSCB's */
+	struct vtoc_cchh DS4HCCHH; /* CCHH of next available alternate track */
+	__u16 DS4NOATK;		/* number of remaining alternate tracks */
+	__u8 DS4VTOCI;		/* VTOC indicators */
+	__u8 DS4NOEXT;		/* number of extents in VTOC */
+	__u8 DS4SMSFG;		/* system managed storage indicators */
+	__u8 DS4DEVAC;		/* number of alternate cylinders.
+				 * Subtract from first two bytes of
+				 * DS4DEVSZ to get number of usable
+				 * cylinders. can be zero. valid
+				 * only if DS4DEVAV on. */
+	struct vtoc_dev_const DS4DEVCT;	/* device constants */
+	char DS4AMTIM[8];	/* VSAM time stamp */
+	char DS4AMCAT[3];	/* VSAM catalog indicator */
+	char DS4R2TIM[8];	/* VSAM volume/catalog match time stamp */
+	char res1[5];		/* reserved */
+	char DS4F6PTR[5];	/* pointer to first format 6 DSCB */
+	struct vtoc_extent DS4VTOCE; /* VTOC extent description */
+	char res2[10];		/* reserved */
+	__u8 DS4EFLVL;		/* extended free-space management level */
+	struct vtoc_cchhb DS4EFPTR; /* pointer to extended free-space info */
+	char res3[9];		/* reserved */
+} __attribute__ ((packed));
+
+struct vtoc_ds5ext
+{
+	__u16 t;	/* RTA of the first track of free extent */
+	__u16 fc;	/* number of whole cylinders in free ext. */
+	__u8 ft;	/* number of remaining free tracks */
+} __attribute__ ((packed));
+
+struct vtoc_format5_label
+{
+	char DS5KEYID[4];	/* key identifier */
+	struct vtoc_ds5ext DS5AVEXT; /* first available (free-space) extent. */
+	struct vtoc_ds5ext DS5EXTAV[7]; /* seven available extents */
+	__u8 DS5FMTID;		/* format identifier */
+	struct vtoc_ds5ext DS5MAVET[18]; /* eighteen available extents */
+	struct vtoc_cchhb DS5PTRDS; /* pointer to next format5 DSCB */
+} __attribute__ ((packed));
+
+struct vtoc_ds7ext
+{
+	__u32 a; /* starting RTA value */
+	__u32 b; /* ending RTA value + 1 */
+} __attribute__ ((packed));
+
+struct vtoc_format7_label
+{
+	char DS7KEYID[4];	/* key identifier */
+	struct vtoc_ds7ext DS7EXTNT[5]; /* space for 5 extent descriptions */
+	__u8 DS7FMTID;		/* format identifier */
+	struct vtoc_ds7ext DS7ADEXT[11]; /* space for 11 extent descriptions */
+	char res1[2];		/* reserved */
+	struct vtoc_cchhb DS7PTRDS; /* pointer to next FMT7 DSCB */
+} __attribute__ ((packed));
+
+struct vtoc_cms_label {
+	__u8 label_id[4];		/* Label identifier */
+	__u8 vol_id[6];		/* Volid */
+	__u16 version_id;		/* Version identifier */
+	__u32 block_size;		/* Disk block size */
+	__u32 origin_ptr;		/* Disk origin pointer */
+	__u32 usable_count;	/* Number of usable cylinders/blocks */
+	__u32 formatted_count;	/* Maximum number of formatted cylinders/
+				 * blocks */
+	__u32 block_count;	/* Disk size in CMS blocks */
+	__u32 used_count;		/* Number of CMS blocks in use */
+	__u32 fst_size;		/* File Status Table (FST) size */
+	__u32 fst_count;		/* Number of FSTs per CMS block */
+	__u8 format_date[6];	/* Disk FORMAT date */
+	__u8 reserved1[2];
+	__u32 disk_offset;	/* Disk offset when reserved*/
+	__u32 map_block;		/* Allocation Map Block with next hole */
+	__u32 hblk_disp;		/* Displacement into HBLK data of next hole */
+	__u32 user_disp;		/* Displacement into user part of Allocation
+				 * map */
+	__u8 reserved2[4];
+	__u8 segment_name[8];	/* Name of shared segment */
+} __attribute__ ((packed));
+
+#endif /* _ASM_S390_VTOC_H */
diff --git a/arch/s390/include/asm/xor.h b/arch/s390/include/asm/xor.h
new file mode 100644
index 000000000000..c82eb12a5b18
--- /dev/null
+++ b/arch/s390/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/arch/s390/include/asm/zcrypt.h b/arch/s390/include/asm/zcrypt.h
new file mode 100644
index 000000000000..00d3bbd44117
--- /dev/null
+++ b/arch/s390/include/asm/zcrypt.h
@@ -0,0 +1,276 @@
+/*
+ *  include/asm-s390/zcrypt.h
+ *
+ *  zcrypt 2.1.0 (user-visible header)
+ *
+ *  Copyright (C)  2001, 2006 IBM Corporation
+ *  Author(s): Robert Burroughs
+ *	       Eric Rossman (edrossma@us.ibm.com)
+ *
+ *  Hotplug & misc device support: Jochen Roehrig (roehrig@de.ibm.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_S390_ZCRYPT_H
+#define __ASM_S390_ZCRYPT_H
+
+#define ZCRYPT_VERSION 2
+#define ZCRYPT_RELEASE 1
+#define ZCRYPT_VARIANT 1
+
+#include <linux/ioctl.h>
+#include <linux/compiler.h>
+
+/**
+ * struct ica_rsa_modexpo
+ *
+ * Requirements:
+ * - outputdatalength is at least as large as inputdatalength.
+ * - All key parts are right justified in their fields, padded on
+ *   the left with zeroes.
+ * - length(b_key) = inputdatalength
+ * - length(n_modulus) = inputdatalength
+ */
+struct ica_rsa_modexpo {
+	char __user *	inputdata;
+	unsigned int	inputdatalength;
+	char __user *	outputdata;
+	unsigned int	outputdatalength;
+	char __user *	b_key;
+	char __user *	n_modulus;
+};
+
+/**
+ * struct ica_rsa_modexpo_crt
+ *
+ * Requirements:
+ * - inputdatalength is even.
+ * - outputdatalength is at least as large as inputdatalength.
+ * - All key parts are right justified in their fields, padded on
+ *   the left with zeroes.
+ * - length(bp_key)	= inputdatalength/2 + 8
+ * - length(bq_key)	= inputdatalength/2
+ * - length(np_key)	= inputdatalength/2 + 8
+ * - length(nq_key)	= inputdatalength/2
+ * - length(u_mult_inv) = inputdatalength/2 + 8
+ */
+struct ica_rsa_modexpo_crt {
+	char __user *	inputdata;
+	unsigned int	inputdatalength;
+	char __user *	outputdata;
+	unsigned int	outputdatalength;
+	char __user *	bp_key;
+	char __user *	bq_key;
+	char __user *	np_prime;
+	char __user *	nq_prime;
+	char __user *	u_mult_inv;
+};
+
+/**
+ * CPRBX
+ *	  Note that all shorts and ints are big-endian.
+ *	  All pointer fields are 16 bytes long, and mean nothing.
+ *
+ *	  A request CPRB is followed by a request_parameter_block.
+ *
+ *	  The request (or reply) parameter block is organized thus:
+ *	    function code
+ *	    VUD block
+ *	    key block
+ */
+struct CPRBX {
+	unsigned short	cprb_len;	/* CPRB length	      220	 */
+	unsigned char	cprb_ver_id;	/* CPRB version id.   0x02	 */
+	unsigned char	pad_000[3];	/* Alignment pad bytes		 */
+	unsigned char	func_id[2];	/* function id	      0x5432	 */
+	unsigned char	cprb_flags[4];	/* Flags			 */
+	unsigned int	req_parml;	/* request parameter buffer len	 */
+	unsigned int	req_datal;	/* request data buffer		 */
+	unsigned int	rpl_msgbl;	/* reply  message block length	 */
+	unsigned int	rpld_parml;	/* replied parameter block len	 */
+	unsigned int	rpl_datal;	/* reply data block len		 */
+	unsigned int	rpld_datal;	/* replied data block len	 */
+	unsigned int	req_extbl;	/* request extension block len	 */
+	unsigned char	pad_001[4];	/* reserved			 */
+	unsigned int	rpld_extbl;	/* replied extension block len	 */
+	unsigned char	padx000[16 - sizeof (char *)];
+	unsigned char *	req_parmb;	/* request parm block 'address'	 */
+	unsigned char	padx001[16 - sizeof (char *)];
+	unsigned char *	req_datab;	/* request data block 'address'	 */
+	unsigned char	padx002[16 - sizeof (char *)];
+	unsigned char *	rpl_parmb;	/* reply parm block 'address'	 */
+	unsigned char	padx003[16 - sizeof (char *)];
+	unsigned char *	rpl_datab;	/* reply data block 'address'	 */
+	unsigned char	padx004[16 - sizeof (char *)];
+	unsigned char *	req_extb;	/* request extension block 'addr'*/
+	unsigned char	padx005[16 - sizeof (char *)];
+	unsigned char *	rpl_extb;	/* reply extension block 'address'*/
+	unsigned short	ccp_rtcode;	/* server return code		 */
+	unsigned short	ccp_rscode;	/* server reason code		 */
+	unsigned int	mac_data_len;	/* Mac Data Length		 */
+	unsigned char	logon_id[8];	/* Logon Identifier		 */
+	unsigned char	mac_value[8];	/* Mac Value			 */
+	unsigned char	mac_content_flgs;/* Mac content flag byte	 */
+	unsigned char	pad_002;	/* Alignment			 */
+	unsigned short	domain;		/* Domain			 */
+	unsigned char	usage_domain[4];/* Usage domain			 */
+	unsigned char	cntrl_domain[4];/* Control domain		 */
+	unsigned char	S390enf_mask[4];/* S/390 enforcement mask	 */
+	unsigned char	pad_004[36];	/* reserved			 */
+} __attribute__((packed));
+
+/**
+ * xcRB
+ */
+struct ica_xcRB {
+	unsigned short	agent_ID;
+	unsigned int	user_defined;
+	unsigned short	request_ID;
+	unsigned int	request_control_blk_length;
+	unsigned char	padding1[16 - sizeof (char *)];
+	char __user *	request_control_blk_addr;
+	unsigned int	request_data_length;
+	char		padding2[16 - sizeof (char *)];
+	char __user *	request_data_address;
+	unsigned int	reply_control_blk_length;
+	char		padding3[16 - sizeof (char *)];
+	char __user *	reply_control_blk_addr;
+	unsigned int	reply_data_length;
+	char		padding4[16 - sizeof (char *)];
+	char __user *	reply_data_addr;
+	unsigned short	priority_window;
+	unsigned int	status;
+} __attribute__((packed));
+#define AUTOSELECT ((unsigned int)0xFFFFFFFF)
+
+#define ZCRYPT_IOCTL_MAGIC 'z'
+
+/**
+ * Interface notes:
+ *
+ * The ioctl()s which are implemented (along with relevant details)
+ * are:
+ *
+ *   ICARSAMODEXPO
+ *     Perform an RSA operation using a Modulus-Exponent pair
+ *     This takes an ica_rsa_modexpo struct as its arg.
+ *
+ *     NOTE: please refer to the comments preceding this structure
+ *	     for the implementation details for the contents of the
+ *	     block
+ *
+ *   ICARSACRT
+ *     Perform an RSA operation using a Chinese-Remainder Theorem key
+ *     This takes an ica_rsa_modexpo_crt struct as its arg.
+ *
+ *     NOTE: please refer to the comments preceding this structure
+ *	     for the implementation details for the contents of the
+ *	     block
+ *
+ *   ZSECSENDCPRB
+ *     Send an arbitrary CPRB to a crypto card.
+ *
+ *   Z90STAT_STATUS_MASK
+ *     Return an 64 element array of unsigned chars for the status of
+ *     all devices.
+ *	 0x01: PCICA
+ *	 0x02: PCICC
+ *	 0x03: PCIXCC_MCL2
+ *	 0x04: PCIXCC_MCL3
+ *	 0x05: CEX2C
+ *	 0x06: CEX2A
+ *	 0x0d: device is disabled via the proc filesystem
+ *
+ *   Z90STAT_QDEPTH_MASK
+ *     Return an 64 element array of unsigned chars for the queue
+ *     depth of all devices.
+ *
+ *   Z90STAT_PERDEV_REQCNT
+ *     Return an 64 element array of unsigned integers for the number
+ *     of successfully completed requests per device since the device
+ *     was detected and made available.
+ *
+ *   Z90STAT_REQUESTQ_COUNT
+ *     Return an integer count of the number of entries waiting to be
+ *     sent to a device.
+ *
+ *   Z90STAT_PENDINGQ_COUNT
+ *     Return an integer count of the number of entries sent to all
+ *     devices awaiting the reply.
+ *
+ *   Z90STAT_TOTALOPEN_COUNT
+ *     Return an integer count of the number of open file handles.
+ *
+ *   Z90STAT_DOMAIN_INDEX
+ *     Return the integer value of the Cryptographic Domain.
+ *
+ *   The following ioctls are deprecated and should be no longer used:
+ *
+ *   Z90STAT_TOTALCOUNT
+ *     Return an integer count of all device types together.
+ *
+ *   Z90STAT_PCICACOUNT
+ *     Return an integer count of all PCICAs.
+ *
+ *   Z90STAT_PCICCCOUNT
+ *     Return an integer count of all PCICCs.
+ *
+ *   Z90STAT_PCIXCCMCL2COUNT
+ *     Return an integer count of all MCL2 PCIXCCs.
+ *
+ *   Z90STAT_PCIXCCMCL3COUNT
+ *     Return an integer count of all MCL3 PCIXCCs.
+ *
+ *   Z90STAT_CEX2CCOUNT
+ *     Return an integer count of all CEX2Cs.
+ *
+ *   Z90STAT_CEX2ACOUNT
+ *     Return an integer count of all CEX2As.
+ *
+ *   ICAZ90STATUS
+ *     Return some device driver status in a ica_z90_status struct
+ *     This takes an ica_z90_status struct as its arg.
+ *
+ *   Z90STAT_PCIXCCCOUNT
+ *     Return an integer count of all PCIXCCs (MCL2 + MCL3).
+ *     This is DEPRECATED now that MCL3 PCIXCCs are treated differently from
+ *     MCL2 PCIXCCs.
+ */
+
+/**
+ * Supported ioctl calls
+ */
+#define ICARSAMODEXPO	_IOC(_IOC_READ|_IOC_WRITE, ZCRYPT_IOCTL_MAGIC, 0x05, 0)
+#define ICARSACRT	_IOC(_IOC_READ|_IOC_WRITE, ZCRYPT_IOCTL_MAGIC, 0x06, 0)
+#define ZSECSENDCPRB	_IOC(_IOC_READ|_IOC_WRITE, ZCRYPT_IOCTL_MAGIC, 0x81, 0)
+
+/* New status calls */
+#define Z90STAT_TOTALCOUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x40, int)
+#define Z90STAT_PCICACOUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x41, int)
+#define Z90STAT_PCICCCOUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x42, int)
+#define Z90STAT_PCIXCCMCL2COUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x4b, int)
+#define Z90STAT_PCIXCCMCL3COUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x4c, int)
+#define Z90STAT_CEX2CCOUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x4d, int)
+#define Z90STAT_CEX2ACOUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x4e, int)
+#define Z90STAT_REQUESTQ_COUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x44, int)
+#define Z90STAT_PENDINGQ_COUNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x45, int)
+#define Z90STAT_TOTALOPEN_COUNT _IOR(ZCRYPT_IOCTL_MAGIC, 0x46, int)
+#define Z90STAT_DOMAIN_INDEX	_IOR(ZCRYPT_IOCTL_MAGIC, 0x47, int)
+#define Z90STAT_STATUS_MASK	_IOR(ZCRYPT_IOCTL_MAGIC, 0x48, char[64])
+#define Z90STAT_QDEPTH_MASK	_IOR(ZCRYPT_IOCTL_MAGIC, 0x49, char[64])
+#define Z90STAT_PERDEV_REQCNT	_IOR(ZCRYPT_IOCTL_MAGIC, 0x4a, int[64])
+
+#endif /* __ASM_S390_ZCRYPT_H */
diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S
index d003a6e16afb..328a20e880b5 100644
--- a/arch/s390/kernel/compat_wrapper.S
+++ b/arch/s390/kernel/compat_wrapper.S
@@ -1732,3 +1732,40 @@ compat_sys_timerfd_gettime_wrapper:
 	lgfr	%r2,%r2			# int
 	llgtr	%r3,%r3			# struct compat_itimerspec *
 	jg	compat_sys_timerfd_gettime
+
+	.globl compat_sys_signalfd4_wrapper
+compat_sys_signalfd4_wrapper:
+	lgfr	%r2,%r2			# int
+	llgtr	%r3,%r3			# compat_sigset_t *
+	llgfr	%r4,%r4			# compat_size_t
+	lgfr	%r5,%r5			# int
+	jg	compat_sys_signalfd4
+
+	.globl sys_eventfd2_wrapper
+sys_eventfd2_wrapper:
+	llgfr	%r2,%r2			# unsigned int
+	lgfr	%r3,%r3			# int
+	jg	sys_eventfd2
+
+	.globl	sys_inotify_init1_wrapper
+sys_inotify_init1_wrapper:
+	lgfr	%r2,%r2			# int
+	jg	sys_inotify_init1
+
+	.globl	sys_pipe2_wrapper
+sys_pipe2_wrapper:
+	llgtr	%r2,%r2			# u32 *
+	lgfr	%r3,%r3			# int
+	jg	sys_pipe2		# branch to system call
+
+	.globl	sys_dup3_wrapper
+sys_dup3_wrapper:
+	llgfr	%r2,%r2			# unsigned int
+	llgfr	%r3,%r3			# unsigned int
+	lgfr	%r4,%r4			# int
+	jg	sys_dup3		# branch to system call
+
+	.globl	sys_epoll_create1_wrapper
+sys_epoll_create1_wrapper:
+	lgfr	%r2,%r2			# int
+	jg	sys_epoll_create1	# branch to system call
diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c
index 54b2779b5e2f..2dcf590faba6 100644
--- a/arch/s390/kernel/ipl.c
+++ b/arch/s390/kernel/ipl.c
@@ -1705,7 +1705,10 @@ void __init setup_ipl(void)
 
 void __init ipl_update_parameters(void)
 {
-	if (diag308(DIAG308_STORE, &ipl_block) == DIAG308_RC_OK)
+	int rc;
+
+	rc = diag308(DIAG308_STORE, &ipl_block);
+	if ((rc == DIAG308_RC_OK) || (rc == DIAG308_RC_NOCONFIG))
 		diag308_set_works = 1;
 }
 
diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c
index 288ad490a6dd..569079ec4ff0 100644
--- a/arch/s390/kernel/kprobes.c
+++ b/arch/s390/kernel/kprobes.c
@@ -197,7 +197,7 @@ void __kprobes arch_arm_kprobe(struct kprobe *p)
 	args.new = BREAKPOINT_INSTRUCTION;
 
 	kcb->kprobe_status = KPROBE_SWAP_INST;
-	stop_machine_run(swap_instruction, &args, NR_CPUS);
+	stop_machine(swap_instruction, &args, NULL);
 	kcb->kprobe_status = status;
 }
 
@@ -212,7 +212,7 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
 	args.new = p->opcode;
 
 	kcb->kprobe_status = KPROBE_SWAP_INST;
-	stop_machine_run(swap_instruction, &args, NR_CPUS);
+	stop_machine(swap_instruction, &args, NULL);
 	kcb->kprobe_status = status;
 }
 
@@ -270,7 +270,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p, struct pt_regs *regs,
 	__ctl_store(kcb->kprobe_saved_ctl, 9, 11);
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 					struct pt_regs *regs)
 {
@@ -332,7 +331,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs)
 		 * No kprobe at this address. The fault has not been
 		 * caused by a kprobe breakpoint. The race of breakpoint
 		 * vs. kprobe remove does not exist because on s390 we
-		 * use stop_machine_run to arm/disarm the breakpoints.
+		 * use stop_machine to arm/disarm the breakpoints.
 		 */
 		goto no_kprobe;
 
@@ -377,8 +376,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -417,7 +415,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p,
 	regs->psw.addr = orig_ret_address | PSW_ADDR_AMODE;
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
diff --git a/arch/s390/kernel/mem_detect.c b/arch/s390/kernel/mem_detect.c
index 18ed7abe16c5..9872999c66d1 100644
--- a/arch/s390/kernel/mem_detect.c
+++ b/arch/s390/kernel/mem_detect.c
@@ -9,27 +9,6 @@
 #include <asm/sclp.h>
 #include <asm/setup.h>
 
-static int memory_fast_detect(struct mem_chunk *chunk)
-{
-	unsigned long val0 = 0;
-	unsigned long val1 = 0xc;
-	int rc = -EOPNOTSUPP;
-
-	if (ipl_flags & IPL_NSS_VALID)
-		return -EOPNOTSUPP;
-	asm volatile(
-		"	diag	%1,%2,0x260\n"
-		"0:	lhi	%0,0\n"
-		"1:\n"
-		EX_TABLE(0b,1b)
-		: "+d" (rc), "+d" (val0), "+d" (val1) : : "cc");
-
-	if (rc || val0 != val1)
-		return -EOPNOTSUPP;
-	chunk->size = val0 + 1;
-	return 0;
-}
-
 static inline int tprot(unsigned long addr)
 {
 	int rc = -EFAULT;
@@ -84,8 +63,6 @@ void detect_memory_layout(struct mem_chunk chunk[])
 	unsigned long flags, cr0;
 
 	memset(chunk, 0, MEMORY_CHUNKS * sizeof(struct mem_chunk));
-	if (memory_fast_detect(&chunk[0]) == 0)
-		return;
 	/* Disable IRQs, DAT and low address protection so tprot does the
 	 * right thing and we don't get scheduled away with low address
 	 * protection disabled.
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index 85defd01d293..9839767d0842 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -142,7 +142,7 @@ static void default_idle(void)
 void cpu_idle(void)
 {
 	for (;;) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			default_idle();
 		tick_nohz_restart_sched_tick();
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index b358e18273b0..62122bad1e33 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -54,6 +54,7 @@
 #include <asm/sections.h>
 #include <asm/ebcdic.h>
 #include <asm/compat.h>
+#include <asm/kvm_virtio.h>
 
 long psw_kernel_bits	= (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY |
 			   PSW_MASK_MCHECK | PSW_DEFAULT_KEY);
@@ -766,7 +767,8 @@ setup_arch(char **cmdline_p)
 		printk("We are running under VM (64 bit mode)\n");
 	else if (MACHINE_IS_KVM) {
 		printk("We are running under KVM (64 bit mode)\n");
-		add_preferred_console("ttyS", 1, NULL);
+		add_preferred_console("hvc", 0, NULL);
+		s390_virtio_console_init();
 	} else
 		printk("We are running native (64 bit mode)\n");
 #endif /* CONFIG_64BIT */
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 5d4fa4b1c74c..b795b3e24afd 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -109,7 +109,7 @@ static void do_call_function(void)
 }
 
 static void __smp_call_function_map(void (*func) (void *info), void *info,
-				    int nonatomic, int wait, cpumask_t map)
+				    int wait, cpumask_t map)
 {
 	struct call_data_struct data;
 	int cpu, local = 0;
@@ -162,7 +162,6 @@ out:
  * smp_call_function:
  * @func: the function to run; this must be fast and non-blocking
  * @info: an arbitrary pointer to pass to the function
- * @nonatomic: unused
  * @wait: if true, wait (atomically) until function has completed on other CPUs
  *
  * Run a function on all other CPUs.
@@ -170,15 +169,14 @@ out:
  * You must not call this function with disabled interrupts, from a
  * hardware interrupt handler or from a bottom half.
  */
-int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
-		      int wait)
+int smp_call_function(void (*func) (void *info), void *info, int wait)
 {
 	cpumask_t map;
 
 	spin_lock(&call_lock);
 	map = cpu_online_map;
 	cpu_clear(smp_processor_id(), map);
-	__smp_call_function_map(func, info, nonatomic, wait, map);
+	__smp_call_function_map(func, info, wait, map);
 	spin_unlock(&call_lock);
 	return 0;
 }
@@ -189,7 +187,6 @@ EXPORT_SYMBOL(smp_call_function);
  * @cpu: the CPU where func should run
  * @func: the function to run; this must be fast and non-blocking
  * @info: an arbitrary pointer to pass to the function
- * @nonatomic: unused
  * @wait: if true, wait (atomically) until function has completed on other CPUs
  *
  * Run a function on one processor.
@@ -198,11 +195,10 @@ EXPORT_SYMBOL(smp_call_function);
  * hardware interrupt handler or from a bottom half.
  */
 int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
-			     int nonatomic, int wait)
+			     int wait)
 {
 	spin_lock(&call_lock);
-	__smp_call_function_map(func, info, nonatomic, wait,
-				cpumask_of_cpu(cpu));
+	__smp_call_function_map(func, info, wait, cpumask_of_cpu(cpu));
 	spin_unlock(&call_lock);
 	return 0;
 }
@@ -228,7 +224,7 @@ int smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info,
 {
 	spin_lock(&call_lock);
 	cpu_clear(smp_processor_id(), mask);
-	__smp_call_function_map(func, info, 0, wait, mask);
+	__smp_call_function_map(func, info, wait, mask);
 	spin_unlock(&call_lock);
 	return 0;
 }
@@ -303,7 +299,7 @@ static void smp_ptlb_callback(void *info)
 
 void smp_ptlb_all(void)
 {
-	on_each_cpu(smp_ptlb_callback, NULL, 0, 1);
+	on_each_cpu(smp_ptlb_callback, NULL, 1);
 }
 EXPORT_SYMBOL(smp_ptlb_all);
 #endif /* ! CONFIG_64BIT */
@@ -351,7 +347,7 @@ void smp_ctl_set_bit(int cr, int bit)
 	memset(&parms.orvals, 0, sizeof(parms.orvals));
 	memset(&parms.andvals, 0xff, sizeof(parms.andvals));
 	parms.orvals[cr] = 1 << bit;
-	on_each_cpu(smp_ctl_bit_callback, &parms, 0, 1);
+	on_each_cpu(smp_ctl_bit_callback, &parms, 1);
 }
 EXPORT_SYMBOL(smp_ctl_set_bit);
 
@@ -365,7 +361,7 @@ void smp_ctl_clear_bit(int cr, int bit)
 	memset(&parms.orvals, 0, sizeof(parms.orvals));
 	memset(&parms.andvals, 0xff, sizeof(parms.andvals));
 	parms.andvals[cr] = ~(1L << bit);
-	on_each_cpu(smp_ctl_bit_callback, &parms, 0, 1);
+	on_each_cpu(smp_ctl_bit_callback, &parms, 1);
 }
 EXPORT_SYMBOL(smp_ctl_clear_bit);
 
@@ -868,7 +864,8 @@ int setup_profiling_timer(unsigned int multiplier)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
-static ssize_t cpu_configure_show(struct sys_device *dev, char *buf)
+static ssize_t cpu_configure_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	ssize_t count;
 
@@ -878,8 +875,9 @@ static ssize_t cpu_configure_show(struct sys_device *dev, char *buf)
 	return count;
 }
 
-static ssize_t cpu_configure_store(struct sys_device *dev, const char *buf,
-				   size_t count)
+static ssize_t cpu_configure_store(struct sys_device *dev,
+				  struct sysdev_attribute *attr,
+				  const char *buf, size_t count)
 {
 	int cpu = dev->id;
 	int val, rc;
@@ -926,7 +924,8 @@ out:
 static SYSDEV_ATTR(configure, 0644, cpu_configure_show, cpu_configure_store);
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static ssize_t cpu_polarization_show(struct sys_device *dev, char *buf)
+static ssize_t cpu_polarization_show(struct sys_device *dev,
+				     struct sysdev_attribute *attr, char *buf)
 {
 	int cpu = dev->id;
 	ssize_t count;
@@ -954,7 +953,8 @@ static ssize_t cpu_polarization_show(struct sys_device *dev, char *buf)
 }
 static SYSDEV_ATTR(polarization, 0444, cpu_polarization_show, NULL);
 
-static ssize_t show_cpu_address(struct sys_device *dev, char *buf)
+static ssize_t show_cpu_address(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	return sprintf(buf, "%d\n", __cpu_logical_map[dev->id]);
 }
@@ -974,7 +974,8 @@ static struct attribute_group cpu_common_attr_group = {
 	.attrs = cpu_common_attrs,
 };
 
-static ssize_t show_capability(struct sys_device *dev, char *buf)
+static ssize_t show_capability(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned int capability;
 	int rc;
@@ -986,7 +987,8 @@ static ssize_t show_capability(struct sys_device *dev, char *buf)
 }
 static SYSDEV_ATTR(capability, 0444, show_capability, NULL);
 
-static ssize_t show_idle_count(struct sys_device *dev, char *buf)
+static ssize_t show_idle_count(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct s390_idle_data *idle;
 	unsigned long long idle_count;
@@ -999,7 +1001,8 @@ static ssize_t show_idle_count(struct sys_device *dev, char *buf)
 }
 static SYSDEV_ATTR(idle_count, 0444, show_idle_count, NULL);
 
-static ssize_t show_idle_time(struct sys_device *dev, char *buf)
+static ssize_t show_idle_time(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct s390_idle_data *idle;
 	unsigned long long new_time;
@@ -1116,7 +1119,9 @@ out:
 	return rc;
 }
 
-static ssize_t __ref rescan_store(struct sys_device *dev, const char *buf,
+static ssize_t __ref rescan_store(struct sys_device *dev,
+				  struct sysdev_attribute *attr,
+				  const char *buf,
 				  size_t count)
 {
 	int rc;
@@ -1127,7 +1132,9 @@ static ssize_t __ref rescan_store(struct sys_device *dev, const char *buf,
 static SYSDEV_ATTR(rescan, 0200, NULL, rescan_store);
 #endif /* CONFIG_HOTPLUG_CPU */
 
-static ssize_t dispatching_show(struct sys_device *dev, char *buf)
+static ssize_t dispatching_show(struct sys_device *dev,
+				struct sysdev_attribute *attr,
+				char *buf)
 {
 	ssize_t count;
 
@@ -1137,8 +1144,9 @@ static ssize_t dispatching_show(struct sys_device *dev, char *buf)
 	return count;
 }
 
-static ssize_t dispatching_store(struct sys_device *dev, const char *buf,
-				 size_t count)
+static ssize_t dispatching_store(struct sys_device *dev,
+				 struct sysdev_attribute *attr,
+				 const char *buf, size_t count)
 {
 	int val, rc;
 	char delim;
diff --git a/arch/s390/kernel/stacktrace.c b/arch/s390/kernel/stacktrace.c
index 57571f10270c..8841919ef7e6 100644
--- a/arch/s390/kernel/stacktrace.c
+++ b/arch/s390/kernel/stacktrace.c
@@ -10,6 +10,7 @@
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 #include <linux/kallsyms.h>
+#include <linux/module.h>
 
 static unsigned long save_context_stack(struct stack_trace *trace,
 					unsigned long sp,
diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S
index c87ec687d4c6..c66d35e55142 100644
--- a/arch/s390/kernel/syscalls.S
+++ b/arch/s390/kernel/syscalls.S
@@ -330,3 +330,9 @@ SYSCALL(sys_eventfd,sys_eventfd,sys_eventfd_wrapper)
 SYSCALL(sys_timerfd_create,sys_timerfd_create,sys_timerfd_create_wrapper)
 SYSCALL(sys_timerfd_settime,sys_timerfd_settime,compat_sys_timerfd_settime_wrapper) /* 320 */
 SYSCALL(sys_timerfd_gettime,sys_timerfd_gettime,compat_sys_timerfd_gettime_wrapper)
+SYSCALL(sys_signalfd4,sys_signalfd4,compat_sys_signalfd4_wrapper)
+SYSCALL(sys_eventfd2,sys_eventfd2,sys_eventfd2_wrapper)
+SYSCALL(sys_inotify_init1,sys_inotify_init1,sys_inotify_init1_wrapper)
+SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */
+SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper)
+SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper)
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 7418bebb547f..ca114fe46ffb 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -707,7 +707,7 @@ static int etr_sync_clock(struct etr_aib *aib, int port)
 	 */
 	memset(&etr_sync, 0, sizeof(etr_sync));
 	preempt_disable();
-	smp_call_function(clock_sync_cpu_start, &etr_sync, 0, 0);
+	smp_call_function(clock_sync_cpu_start, &etr_sync, 0);
 	local_irq_disable();
 	enable_sync_clock();
 
@@ -746,7 +746,7 @@ static int etr_sync_clock(struct etr_aib *aib, int port)
 		rc = -EAGAIN;
 	}
 	local_irq_enable();
-	smp_call_function(clock_sync_cpu_end, NULL, 0, 0);
+	smp_call_function(clock_sync_cpu_end, NULL, 0);
 	preempt_enable();
 	return rc;
 }
@@ -926,7 +926,7 @@ static void etr_work_fn(struct work_struct *work)
 	if (!eacr.ea) {
 		/* Both ports offline. Reset everything. */
 		eacr.dp = eacr.es = eacr.sl = 0;
-		on_each_cpu(disable_sync_clock, NULL, 0, 1);
+		on_each_cpu(disable_sync_clock, NULL, 1);
 		del_timer_sync(&etr_timer);
 		etr_update_eacr(eacr);
 		clear_bit(CLOCK_SYNC_ETR, &clock_sync_flags);
@@ -1100,7 +1100,9 @@ static inline struct etr_aib *etr_aib_from_dev(struct sys_device *dev)
 		return etr_port1_online ? &etr_port1 : NULL;
 }
 
-static ssize_t etr_online_show(struct sys_device *dev, char *buf)
+static ssize_t etr_online_show(struct sys_device *dev,
+				struct sysdev_attribute *attr,
+				char *buf)
 {
 	unsigned int online;
 
@@ -1109,7 +1111,8 @@ static ssize_t etr_online_show(struct sys_device *dev, char *buf)
 }
 
 static ssize_t etr_online_store(struct sys_device *dev,
-			      const char *buf, size_t count)
+				struct sysdev_attribute *attr,
+				const char *buf, size_t count)
 {
 	unsigned int value;
 
@@ -1136,7 +1139,9 @@ static ssize_t etr_online_store(struct sys_device *dev,
 
 static SYSDEV_ATTR(online, 0600, etr_online_show, etr_online_store);
 
-static ssize_t etr_stepping_control_show(struct sys_device *dev, char *buf)
+static ssize_t etr_stepping_control_show(struct sys_device *dev,
+					struct sysdev_attribute *attr,
+					char *buf)
 {
 	return sprintf(buf, "%i\n", (dev == &etr_port0_dev) ?
 		       etr_eacr.e0 : etr_eacr.e1);
@@ -1144,7 +1149,8 @@ static ssize_t etr_stepping_control_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(stepping_control, 0400, etr_stepping_control_show, NULL);
 
-static ssize_t etr_mode_code_show(struct sys_device *dev, char *buf)
+static ssize_t etr_mode_code_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	if (!etr_port0_online && !etr_port1_online)
 		/* Status word is not uptodate if both ports are offline. */
@@ -1155,7 +1161,8 @@ static ssize_t etr_mode_code_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(state_code, 0400, etr_mode_code_show, NULL);
 
-static ssize_t etr_untuned_show(struct sys_device *dev, char *buf)
+static ssize_t etr_untuned_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1166,7 +1173,8 @@ static ssize_t etr_untuned_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(untuned, 0400, etr_untuned_show, NULL);
 
-static ssize_t etr_network_id_show(struct sys_device *dev, char *buf)
+static ssize_t etr_network_id_show(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1177,7 +1185,8 @@ static ssize_t etr_network_id_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(network, 0400, etr_network_id_show, NULL);
 
-static ssize_t etr_id_show(struct sys_device *dev, char *buf)
+static ssize_t etr_id_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1188,7 +1197,8 @@ static ssize_t etr_id_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(id, 0400, etr_id_show, NULL);
 
-static ssize_t etr_port_number_show(struct sys_device *dev, char *buf)
+static ssize_t etr_port_number_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1199,7 +1209,8 @@ static ssize_t etr_port_number_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(port, 0400, etr_port_number_show, NULL);
 
-static ssize_t etr_coupled_show(struct sys_device *dev, char *buf)
+static ssize_t etr_coupled_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1210,7 +1221,8 @@ static ssize_t etr_coupled_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(coupled, 0400, etr_coupled_show, NULL);
 
-static ssize_t etr_local_time_show(struct sys_device *dev, char *buf)
+static ssize_t etr_local_time_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1221,7 +1233,8 @@ static ssize_t etr_local_time_show(struct sys_device *dev, char *buf)
 
 static SYSDEV_ATTR(local_time, 0400, etr_local_time_show, NULL);
 
-static ssize_t etr_utc_offset_show(struct sys_device *dev, char *buf)
+static ssize_t etr_utc_offset_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct etr_aib *aib = etr_aib_from_dev(dev);
 
@@ -1335,7 +1348,7 @@ early_param("stp", early_parse_stp);
 /*
  * Reset STP attachment.
  */
-static void stp_reset(void)
+static void __init stp_reset(void)
 {
 	int rc;
 
@@ -1432,7 +1445,7 @@ static void stp_work_fn(struct work_struct *work)
 	 */
 	memset(&stp_sync, 0, sizeof(stp_sync));
 	preempt_disable();
-	smp_call_function(clock_sync_cpu_start, &stp_sync, 0, 0);
+	smp_call_function(clock_sync_cpu_start, &stp_sync, 0);
 	local_irq_disable();
 	enable_sync_clock();
 
@@ -1465,7 +1478,7 @@ static void stp_work_fn(struct work_struct *work)
 		stp_sync.in_sync = 1;
 
 	local_irq_enable();
-	smp_call_function(clock_sync_cpu_end, NULL, 0, 0);
+	smp_call_function(clock_sync_cpu_end, NULL, 0);
 	preempt_enable();
 }
 
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 212d618b0095..632b13e10053 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -9,7 +9,6 @@
 #include <linux/device.h>
 #include <linux/bootmem.h>
 #include <linux/sched.h>
-#include <linux/kthread.h>
 #include <linux/workqueue.h>
 #include <linux/cpu.h>
 #include <linux/smp.h>
@@ -230,20 +229,9 @@ void arch_update_cpu_topology(void)
 	}
 }
 
-static int topology_kthread(void *data)
-{
-	arch_reinit_sched_domains();
-	return 0;
-}
-
 static void topology_work_fn(struct work_struct *work)
 {
-	/* We can't call arch_reinit_sched_domains() from a multi-threaded
-	 * workqueue context since it may deadlock in case of cpu hotplug.
-	 * So we have to create a kernel thread in order to call
-	 * arch_reinit_sched_domains().
-	 */
-	kthread_run(topology_kthread, NULL, "topology_update");
+	arch_reinit_sched_domains();
 }
 
 void topology_schedule_update(void)
diff --git a/arch/s390/kvm/gaccess.h b/arch/s390/kvm/gaccess.h
index 4e0633c413f3..ed60f3a74a85 100644
--- a/arch/s390/kvm/gaccess.h
+++ b/arch/s390/kvm/gaccess.h
@@ -18,11 +18,11 @@
 #include <asm/uaccess.h>
 
 static inline void __user *__guestaddr_to_user(struct kvm_vcpu *vcpu,
-					       u64 guestaddr)
+					       unsigned long guestaddr)
 {
-	u64 prefix  = vcpu->arch.sie_block->prefix;
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long prefix  = vcpu->arch.sie_block->prefix;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if (guestaddr < 2 * PAGE_SIZE)
 		guestaddr += prefix;
@@ -37,7 +37,7 @@ static inline void __user *__guestaddr_to_user(struct kvm_vcpu *vcpu,
 	return (void __user *) guestaddr;
 }
 
-static inline int get_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u64(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u64 *result)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -47,10 +47,10 @@ static inline int get_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
 	if (IS_ERR((void __force *) uptr))
 		return PTR_ERR((void __force *) uptr);
 
-	return get_user(*result, (u64 __user *) uptr);
+	return get_user(*result, (unsigned long __user *) uptr);
 }
 
-static inline int get_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u32(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u32 *result)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -63,7 +63,7 @@ static inline int get_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return get_user(*result, (u32 __user *) uptr);
 }
 
-static inline int get_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u16(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u16 *result)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -76,7 +76,7 @@ static inline int get_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return get_user(*result, (u16 __user *) uptr);
 }
 
-static inline int get_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int get_guest_u8(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 			       u8 *result)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -87,7 +87,7 @@ static inline int get_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return get_user(*result, (u8 __user *) uptr);
 }
 
-static inline int put_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u64(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u64 value)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -100,7 +100,7 @@ static inline int put_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return put_user(value, (u64 __user *) uptr);
 }
 
-static inline int put_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u32(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u32 value)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -113,7 +113,7 @@ static inline int put_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return put_user(value, (u32 __user *) uptr);
 }
 
-static inline int put_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u16(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 				u16 value)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -126,7 +126,7 @@ static inline int put_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr,
 	return put_user(value, (u16 __user *) uptr);
 }
 
-static inline int put_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
+static inline int put_guest_u8(struct kvm_vcpu *vcpu, unsigned long guestaddr,
 			       u8 value)
 {
 	void __user *uptr = __guestaddr_to_user(vcpu, guestaddr);
@@ -138,7 +138,8 @@ static inline int put_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr,
 }
 
 
-static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu, u64 guestdest,
+static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu,
+				       unsigned long guestdest,
 				       const void *from, unsigned long n)
 {
 	int rc;
@@ -153,12 +154,12 @@ static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu, u64 guestdest,
 	return 0;
 }
 
-static inline int copy_to_guest(struct kvm_vcpu *vcpu, u64 guestdest,
+static inline int copy_to_guest(struct kvm_vcpu *vcpu, unsigned long guestdest,
 				const void *from, unsigned long n)
 {
-	u64 prefix  = vcpu->arch.sie_block->prefix;
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long prefix  = vcpu->arch.sie_block->prefix;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if ((guestdest < 2 * PAGE_SIZE) && (guestdest + n > 2 * PAGE_SIZE))
 		goto slowpath;
@@ -189,7 +190,8 @@ slowpath:
 }
 
 static inline int __copy_from_guest_slow(struct kvm_vcpu *vcpu, void *to,
-					 u64 guestsrc, unsigned long n)
+					 unsigned long guestsrc,
+					 unsigned long n)
 {
 	int rc;
 	unsigned long i;
@@ -204,11 +206,11 @@ static inline int __copy_from_guest_slow(struct kvm_vcpu *vcpu, void *to,
 }
 
 static inline int copy_from_guest(struct kvm_vcpu *vcpu, void *to,
-				  u64 guestsrc, unsigned long n)
+				  unsigned long guestsrc, unsigned long n)
 {
-	u64 prefix  = vcpu->arch.sie_block->prefix;
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long prefix  = vcpu->arch.sie_block->prefix;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if ((guestsrc < 2 * PAGE_SIZE) && (guestsrc + n > 2 * PAGE_SIZE))
 		goto slowpath;
@@ -238,11 +240,12 @@ slowpath:
 	return __copy_from_guest_slow(vcpu, to, guestsrc, n);
 }
 
-static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu, u64 guestdest,
+static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu,
+					 unsigned long guestdest,
 					 const void *from, unsigned long n)
 {
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if (guestdest + n > memsize)
 		return -EFAULT;
@@ -256,10 +259,11 @@ static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu, u64 guestdest,
 }
 
 static inline int copy_from_guest_absolute(struct kvm_vcpu *vcpu, void *to,
-					   u64 guestsrc, unsigned long n)
+					   unsigned long guestsrc,
+					   unsigned long n)
 {
-	u64 origin  = vcpu->kvm->arch.guest_origin;
-	u64 memsize = vcpu->kvm->arch.guest_memsize;
+	unsigned long origin  = vcpu->kvm->arch.guest_origin;
+	unsigned long memsize = vcpu->kvm->arch.guest_memsize;
 
 	if (guestsrc + n > memsize)
 		return -EFAULT;
diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c
index 47a0b642174c..61236102203e 100644
--- a/arch/s390/kvm/intercept.c
+++ b/arch/s390/kvm/intercept.c
@@ -20,7 +20,7 @@
 #include "kvm-s390.h"
 #include "gaccess.h"
 
-static int handle_lctg(struct kvm_vcpu *vcpu)
+static int handle_lctlg(struct kvm_vcpu *vcpu)
 {
 	int reg1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4;
 	int reg3 = vcpu->arch.sie_block->ipa & 0x000f;
@@ -30,7 +30,7 @@ static int handle_lctg(struct kvm_vcpu *vcpu)
 	u64 useraddr;
 	int reg, rc;
 
-	vcpu->stat.instruction_lctg++;
+	vcpu->stat.instruction_lctlg++;
 	if ((vcpu->arch.sie_block->ipb & 0xff) != 0x2f)
 		return -ENOTSUPP;
 
@@ -38,9 +38,12 @@ static int handle_lctg(struct kvm_vcpu *vcpu)
 	if (base2)
 		useraddr += vcpu->arch.guest_gprs[base2];
 
+	if (useraddr & 7)
+		return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
+
 	reg = reg1;
 
-	VCPU_EVENT(vcpu, 5, "lctg r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
+	VCPU_EVENT(vcpu, 5, "lctlg r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
 		   disp2);
 
 	do {
@@ -74,6 +77,9 @@ static int handle_lctl(struct kvm_vcpu *vcpu)
 	if (base2)
 		useraddr += vcpu->arch.guest_gprs[base2];
 
+	if (useraddr & 3)
+		return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
+
 	VCPU_EVENT(vcpu, 5, "lctl r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2,
 		   disp2);
 
@@ -99,7 +105,7 @@ static intercept_handler_t instruction_handlers[256] = {
 	[0xae] = kvm_s390_handle_sigp,
 	[0xb2] = kvm_s390_handle_priv,
 	[0xb7] = handle_lctl,
-	[0xeb] = handle_lctg,
+	[0xeb] = handle_lctlg,
 };
 
 static int handle_noop(struct kvm_vcpu *vcpu)
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 84a7fed4cd4e..2960702b4824 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -13,6 +13,7 @@
 #include <asm/lowcore.h>
 #include <asm/uaccess.h>
 #include <linux/kvm_host.h>
+#include <linux/signal.h>
 #include "kvm-s390.h"
 #include "gaccess.h"
 
@@ -31,7 +32,7 @@ static int psw_interrupts_disabled(struct kvm_vcpu *vcpu)
 }
 
 static int __interrupt_is_deliverable(struct kvm_vcpu *vcpu,
-				      struct interrupt_info *inti)
+				      struct kvm_s390_interrupt_info *inti)
 {
 	switch (inti->type) {
 	case KVM_S390_INT_EMERGENCY:
@@ -91,7 +92,7 @@ static void __set_cpuflag(struct kvm_vcpu *vcpu, u32 flag)
 }
 
 static void __set_intercept_indicator(struct kvm_vcpu *vcpu,
-				      struct interrupt_info *inti)
+				      struct kvm_s390_interrupt_info *inti)
 {
 	switch (inti->type) {
 	case KVM_S390_INT_EMERGENCY:
@@ -111,7 +112,7 @@ static void __set_intercept_indicator(struct kvm_vcpu *vcpu,
 }
 
 static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
-				   struct interrupt_info *inti)
+				   struct kvm_s390_interrupt_info *inti)
 {
 	const unsigned short table[] = { 2, 4, 4, 6 };
 	int rc, exception = 0;
@@ -246,15 +247,10 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu,
 	default:
 		BUG();
 	}
-
 	if (exception) {
-		VCPU_EVENT(vcpu, 1, "%s", "program exception while delivering"
-			   " interrupt");
-		kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
-		if (inti->type == KVM_S390_PROGRAM_INT) {
-			printk(KERN_WARNING "kvm: recursive program check\n");
-			BUG();
-		}
+		printk("kvm: The guest lowcore is not mapped during interrupt "
+			"delivery, killing userspace\n");
+		do_exit(SIGKILL);
 	}
 }
 
@@ -277,22 +273,19 @@ static int __try_deliver_ckc_interrupt(struct kvm_vcpu *vcpu)
 		__LC_EXT_NEW_PSW, sizeof(psw_t));
 	if (rc == -EFAULT)
 		exception = 1;
-
 	if (exception) {
-		VCPU_EVENT(vcpu, 1, "%s", "program exception while delivering" \
-			   " ckc interrupt");
-		kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
-		return 0;
+		printk("kvm: The guest lowcore is not mapped during interrupt "
+			"delivery, killing userspace\n");
+		do_exit(SIGKILL);
 	}
-
 	return 1;
 }
 
 int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu)
 {
-	struct local_interrupt *li = &vcpu->arch.local_int;
-	struct float_interrupt *fi = vcpu->arch.local_int.float_int;
-	struct interrupt_info  *inti;
+	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
+	struct kvm_s390_float_interrupt *fi = vcpu->arch.local_int.float_int;
+	struct kvm_s390_interrupt_info  *inti;
 	int rc = 0;
 
 	if (atomic_read(&li->active)) {
@@ -408,9 +401,9 @@ void kvm_s390_idle_wakeup(unsigned long data)
 
 void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu)
 {
-	struct local_interrupt *li = &vcpu->arch.local_int;
-	struct float_interrupt *fi = vcpu->arch.local_int.float_int;
-	struct interrupt_info  *n, *inti = NULL;
+	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
+	struct kvm_s390_float_interrupt *fi = vcpu->arch.local_int.float_int;
+	struct kvm_s390_interrupt_info  *n, *inti = NULL;
 	int deliver;
 
 	__reset_intercept_indicators(vcpu);
@@ -465,8 +458,8 @@ void kvm_s390_deliver_pending_interrupts(struct kvm_vcpu *vcpu)
 
 int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code)
 {
-	struct local_interrupt *li = &vcpu->arch.local_int;
-	struct interrupt_info *inti;
+	struct kvm_s390_local_interrupt *li = &vcpu->arch.local_int;
+	struct kvm_s390_interrupt_info *inti;
 
 	inti = kzalloc(sizeof(*inti), GFP_KERNEL);
 	if (!inti)
@@ -487,9 +480,9 @@ int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code)
 int kvm_s390_inject_vm(struct kvm *kvm,
 		       struct kvm_s390_interrupt *s390int)
 {
-	struct local_interrupt *li;
-	struct float_interrupt *fi;
-	struct interrupt_info *inti;
+	struct kvm_s390_local_interrupt *li;
+	struct kvm_s390_float_interrupt *fi;
+	struct kvm_s390_interrupt_info *inti;
 	int sigcpu;
 
 	inti = kzalloc(sizeof(*inti), GFP_KERNEL);
@@ -544,8 +537,8 @@ int kvm_s390_inject_vm(struct kvm *kvm,
 int kvm_s390_inject_vcpu(struct kvm_vcpu *vcpu,
 			 struct kvm_s390_interrupt *s390int)
 {
-	struct local_interrupt *li;
-	struct interrupt_info *inti;
+	struct kvm_s390_local_interrupt *li;
+	struct kvm_s390_interrupt_info *inti;
 
 	inti = kzalloc(sizeof(*inti), GFP_KERNEL);
 	if (!inti)
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 6558b09ff579..8b00eb2ddf57 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -39,7 +39,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "exit_instruction", VCPU_STAT(exit_instruction) },
 	{ "exit_program_interruption", VCPU_STAT(exit_program_interruption) },
 	{ "exit_instr_and_program_int", VCPU_STAT(exit_instr_and_program) },
-	{ "instruction_lctg", VCPU_STAT(instruction_lctg) },
+	{ "instruction_lctlg", VCPU_STAT(instruction_lctlg) },
 	{ "instruction_lctl", VCPU_STAT(instruction_lctl) },
 	{ "deliver_emergency_signal", VCPU_STAT(deliver_emergency_signal) },
 	{ "deliver_service_signal", VCPU_STAT(deliver_service_signal) },
@@ -79,10 +79,6 @@ void kvm_arch_hardware_disable(void *garbage)
 {
 }
 
-void decache_vcpus_on_cpu(int cpu)
-{
-}
-
 int kvm_arch_hardware_setup(void)
 {
 	return 0;
@@ -116,7 +112,12 @@ long kvm_arch_dev_ioctl(struct file *filp,
 
 int kvm_dev_ioctl_check_extension(long ext)
 {
-	return 0;
+	switch (ext) {
+	case KVM_CAP_USER_MEMORY:
+		return 1;
+	default:
+		return 0;
+	}
 }
 
 /* Section: vm related */
@@ -198,6 +199,7 @@ out_nokvm:
 void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	debug_unregister(kvm->arch.dbf);
+	kvm_free_physmem(kvm);
 	free_page((unsigned long)(kvm->arch.sca));
 	kfree(kvm);
 	module_put(THIS_MODULE);
@@ -250,11 +252,16 @@ static void kvm_s390_vcpu_initial_reset(struct kvm_vcpu *vcpu)
 	vcpu->arch.sie_block->gbea = 1;
 }
 
+/* The current code can have up to 256 pages for virtio */
+#define VIRTIODESCSPACE (256ul * 4096ul)
+
 int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
 {
 	atomic_set(&vcpu->arch.sie_block->cpuflags, CPUSTAT_ZARCH);
-	vcpu->arch.sie_block->gmslm = 0xffffffffffUL;
-	vcpu->arch.sie_block->gmsor = 0x000000000000;
+	vcpu->arch.sie_block->gmslm = vcpu->kvm->arch.guest_memsize +
+				      vcpu->kvm->arch.guest_origin +
+				      VIRTIODESCSPACE - 1ul;
+	vcpu->arch.sie_block->gmsor = vcpu->kvm->arch.guest_origin;
 	vcpu->arch.sie_block->ecb   = 2;
 	vcpu->arch.sie_block->eca   = 0xC1002001U;
 	setup_timer(&vcpu->arch.ckc_timer, kvm_s390_idle_wakeup,
@@ -273,7 +280,8 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm,
 	if (!vcpu)
 		goto out_nomem;
 
-	vcpu->arch.sie_block = (struct sie_block *) get_zeroed_page(GFP_KERNEL);
+	vcpu->arch.sie_block = (struct kvm_s390_sie_block *)
+					get_zeroed_page(GFP_KERNEL);
 
 	if (!vcpu->arch.sie_block)
 		goto out_free_cpu;
@@ -672,6 +680,10 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	return 0;
 }
 
+void kvm_arch_flush_shadow(struct kvm *kvm)
+{
+}
+
 gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
 {
 	return gfn;
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index c02286c6a931..d1faf5c54405 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -158,6 +158,7 @@ static int handle_stfl(struct kvm_vcpu *vcpu)
 
 	vcpu->stat.instruction_stfl++;
 	facility_list &= ~(1UL<<24); /* no stfle */
+	facility_list &= ~(1UL<<23); /* no large pages */
 
 	rc = copy_to_guest(vcpu, offsetof(struct _lowcore, stfl_fac_list),
 			   &facility_list, sizeof(facility_list));
@@ -199,7 +200,7 @@ out:
 
 static void handle_stsi_3_2_2(struct kvm_vcpu *vcpu, struct sysinfo_3_2_2 *mem)
 {
-	struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
 	int cpus = 0;
 	int n;
 
diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c
index 0a236acfb5f6..170392687ce0 100644
--- a/arch/s390/kvm/sigp.c
+++ b/arch/s390/kvm/sigp.c
@@ -43,9 +43,10 @@
 #define SIGP_STAT_RECEIVER_CHECK    0x00000001UL
 
 
-static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, u64 *reg)
+static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr,
+			unsigned long *reg)
 {
-	struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
 	int rc;
 
 	if (cpu_addr >= KVM_MAX_VCPUS)
@@ -71,9 +72,9 @@ static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, u64 *reg)
 
 static int __sigp_emergency(struct kvm_vcpu *vcpu, u16 cpu_addr)
 {
-	struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
-	struct local_interrupt *li;
-	struct interrupt_info *inti;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+	struct kvm_s390_local_interrupt *li;
+	struct kvm_s390_interrupt_info *inti;
 	int rc;
 
 	if (cpu_addr >= KVM_MAX_VCPUS)
@@ -108,9 +109,9 @@ unlock:
 
 static int __sigp_stop(struct kvm_vcpu *vcpu, u16 cpu_addr, int store)
 {
-	struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
-	struct local_interrupt *li;
-	struct interrupt_info *inti;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+	struct kvm_s390_local_interrupt *li;
+	struct kvm_s390_interrupt_info *inti;
 	int rc;
 
 	if (cpu_addr >= KVM_MAX_VCPUS)
@@ -167,11 +168,11 @@ static int __sigp_set_arch(struct kvm_vcpu *vcpu, u32 parameter)
 }
 
 static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address,
-			     u64 *reg)
+			     unsigned long *reg)
 {
-	struct float_interrupt *fi = &vcpu->kvm->arch.float_int;
-	struct local_interrupt *li;
-	struct interrupt_info *inti;
+	struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int;
+	struct kvm_s390_local_interrupt *li;
+	struct kvm_s390_interrupt_info *inti;
 	int rc;
 	u8 tmp;
 
diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c
index eae21a8ac72d..fc6ab6094df8 100644
--- a/arch/s390/lib/delay.c
+++ b/arch/s390/lib/delay.c
@@ -43,7 +43,7 @@ void __udelay(unsigned long usecs)
 		local_bh_disable();
 	local_irq_save(flags);
 	if (raw_irqs_disabled_flags(flags)) {
-		old_cc = S390_lowcore.clock_comparator;
+		old_cc = local_tick_disable();
 		S390_lowcore.clock_comparator = -1ULL;
 		__ctl_store(cr0, 0, 0);
 		dummy = (cr0 & 0xffff00e0) | 0x00000800;
@@ -65,7 +65,7 @@ void __udelay(unsigned long usecs)
 
 	if (raw_irqs_disabled_flags(flags)) {
 		__ctl_load(cr0, 0, 0);
-		S390_lowcore.clock_comparator = old_cc;
+		local_tick_enable(old_cc);
 	}
 	if (!irq_context)
 		_local_bh_enable();
diff --git a/arch/s390/mm/hugetlbpage.c b/arch/s390/mm/hugetlbpage.c
index f4b6124fdb75..f28c43d2f61d 100644
--- a/arch/s390/mm/hugetlbpage.c
+++ b/arch/s390/mm/hugetlbpage.c
@@ -72,7 +72,8 @@ void arch_release_hugepage(struct page *page)
 	page[1].index = 0;
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgdp;
 	pud_t *pudp;
@@ -119,6 +120,11 @@ int pmd_huge(pmd_t pmd)
 	return !!(pmd_val(pmd) & _SEGMENT_ENTRY_LARGE);
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 			     pmd_t *pmdp, int write)
 {
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 388cc7420055..1169130a97ef 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -42,38 +42,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__((__aligned__(PAGE_SIZE)));
 char  empty_zero_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
 
-void show_mem(void)
-{
-	unsigned long i, total = 0, reserved = 0;
-	unsigned long shared = 0, cached = 0;
-	unsigned long flags;
-	struct page *page;
-	pg_data_t *pgdat;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			if (!pfn_valid(pgdat->node_start_pfn + i))
-				continue;
-			page = pfn_to_page(pgdat->node_start_pfn + i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk("%ld pages of RAM\n", total);
-	printk("%ld reserved pages\n", reserved);
-	printk("%ld pages shared\n", shared);
-	printk("%ld pages swap cached\n", cached);
-}
-
 /*
  * paging_init() sets up the page tables
  */
@@ -211,7 +179,7 @@ int arch_add_memory(int nid, u64 start, u64 size)
 	int rc;
 
 	pgdat = NODE_DATA(nid);
-	zone = pgdat->node_zones + ZONE_NORMAL;
+	zone = pgdat->node_zones + ZONE_MOVABLE;
 	rc = vmem_add_mapping(start, size);
 	if (rc)
 		return rc;
@@ -221,3 +189,14 @@ int arch_add_memory(int nid, u64 start, u64 size)
 	return rc;
 }
 #endif /* CONFIG_MEMORY_HOTPLUG */
+
+#ifdef CONFIG_MEMORY_HOTREMOVE
+int remove_memory(u64 start, u64 size)
+{
+	unsigned long start_pfn, end_pfn;
+
+	start_pfn = PFN_DOWN(start);
+	end_pfn = start_pfn + PFN_DOWN(size);
+	return offline_pages(start_pfn, end_pfn, 120 * HZ);
+}
+#endif /* CONFIG_MEMORY_HOTREMOVE */
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 9a854c8e5274..5131d50f851a 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -8,8 +8,10 @@ mainmenu "Linux/SuperH Kernel Configuration"
 config SUPERH
 	def_bool y
 	select EMBEDDED
+	select HAVE_CLK
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select HAVE_GENERIC_DMA_COHERENT
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
@@ -22,6 +24,11 @@ config SUPERH32
 config SUPERH64
 	def_bool y if CPU_SH5
 
+config ARCH_DEFCONFIG
+	string
+	default "arch/sh/configs/shx3_defconfig" if SUPERH32
+	default "arch/sh/configs/cayman_defconfig" if SUPERH64
+
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 
@@ -41,6 +48,9 @@ config GENERIC_HWEIGHT
 config GENERIC_HARDIRQS
 	def_bool y
 
+config GENERIC_HARDIRQS_NO__DO_IRQ
+	def_bool y
+
 config GENERIC_IRQ_PROBE
 	def_bool y
 
@@ -56,6 +66,10 @@ config GENERIC_TIME
 config GENERIC_CLOCKEVENTS
 	def_bool n
 
+config GENERIC_LOCKBREAK
+	def_bool y
+	depends on SMP && PREEMPT
+
 config SYS_SUPPORTS_PM
 	bool
 
@@ -87,9 +101,6 @@ config ARCH_HAS_ILOG2_U64
 config ARCH_NO_VIRT_TO_BUS
 	def_bool y
 
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
 config IO_TRAPPED
 	bool
 
@@ -346,219 +357,10 @@ config CPU_SUBTYPE_SH5_103
 endchoice
 
 source "arch/sh/mm/Kconfig"
+ 
 source "arch/sh/Kconfig.cpu"
 
-menu "Board support"
-
-config SOLUTION_ENGINE
-	bool
-
-config SH_SOLUTION_ENGINE
-	bool "SolutionEngine"
-	select SOLUTION_ENGINE
-	select CPU_HAS_IPR_IRQ
-	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
-	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
-	  CPU_SUBTYPE_SH7750R 
-	help
-	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
-	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
-
-config SH_7206_SOLUTION_ENGINE
-	bool "SolutionEngine7206"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7206
-	help
-	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
-	  evaluation board.
-
-config SH_7619_SOLUTION_ENGINE
-	bool "SolutionEngine7619"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7619
-	help
-	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
-	  evaluation board.
-	
-config SH_7721_SOLUTION_ENGINE
-	bool "SolutionEngine7721"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7721
-	help
-	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
-	  evaluation board.
-
-config SH_7722_SOLUTION_ENGINE
-	bool "SolutionEngine7722"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7722
-	help
-	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
-	  evaluation board.
-
-config SH_7751_SOLUTION_ENGINE
-	bool "SolutionEngine7751"
-	select SOLUTION_ENGINE
-	select CPU_HAS_IPR_IRQ
-	depends on CPU_SUBTYPE_SH7751
-	help
-	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
-	  evaluation board.
-	  
-config SH_7780_SOLUTION_ENGINE
-	bool "SolutionEngine7780"
-	select SOLUTION_ENGINE
-	select SYS_SUPPORTS_PCI
-	depends on CPU_SUBTYPE_SH7780
-	help
-	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
-	  evaluation board.
-
-config SH_7343_SOLUTION_ENGINE
-	bool "SolutionEngine7343"
-	select SOLUTION_ENGINE
-	depends on CPU_SUBTYPE_SH7343
-	help
-	  Select 7343 SolutionEngine if configuring for a Hitachi
-	  SH7343 (SH-Mobile 3AS) evaluation board.
-
-config SH_7751_SYSTEMH
-	bool "SystemH7751R"
-	depends on CPU_SUBTYPE_SH7751R
-	help
-	  Select SystemH if you are configuring for a Renesas SystemH
-	  7751R evaluation board.
-
-config SH_HP6XX
-	bool "HP6XX"
-	select SYS_SUPPORTS_APM_EMULATION
-	select HD6446X_SERIES
-	depends on CPU_SUBTYPE_SH7709
-	help
-	  Select HP6XX if configuring for a HP jornada HP6xx.
-	  More information (hardware only) at
-	  <http://www.hp.com/jornada/>.
-
-config SH_DREAMCAST
-	bool "Dreamcast"
-	select SYS_SUPPORTS_PCI
-	depends on CPU_SUBTYPE_SH7091
-	help
-	  Select Dreamcast if configuring for a SEGA Dreamcast.
-	  More information at <http://www.linux-sh.org>
-
-config SH_SH03
-	bool "Interface CTP/PCI-SH03"
-	depends on CPU_SUBTYPE_SH7751
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  CTP/PCI-SH03 is a CPU module computer that is produced
-	  by Interface Corporation.
-	  More information at <http://www.interface.co.jp>
-
-config SH_SECUREEDGE5410
-	bool "SecureEdge5410"
-	depends on CPU_SUBTYPE_SH7751R
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  Select SecureEdge5410 if configuring for a SnapGear SH board.
-	  This includes both the OEM SecureEdge products as well as the
-	  SME product line.
-
-config SH_RTS7751R2D
-	bool "RTS7751R2D"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
-	help
-	  Select RTS7751R2D if configuring for a Renesas Technology
-	  Sales SH-Graphics board.
-
-config SH_SDK7780
-	bool "SDK7780R3"
-	depends on CPU_SUBTYPE_SH7780
-	select SYS_SUPPORTS_PCI
-	help
-	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
-	  evaluation board.
-
-config SH_HIGHLANDER
-	bool "Highlander"
-	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
-	select SYS_SUPPORTS_PCI
-	select IO_TRAPPED
-
-config SH_MIGOR
-	bool "Migo-R"
-	depends on CPU_SUBTYPE_SH7722
-	help
-	  Select Migo-R if configuring for the SH7722 Migo-R platform
-          by Renesas System Solutions Asia Pte. Ltd.
-
-config SH_EDOSK7705
-	bool "EDOSK7705"
-	depends on CPU_SUBTYPE_SH7705
-
-config SH_SH4202_MICRODEV
-	bool "SH4-202 MicroDev"
-	depends on CPU_SUBTYPE_SH4_202
-	help
-	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
-	  with an SH4-202 CPU.
-
-config SH_LANDISK
-	bool "LANDISK"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	help
-	  I-O DATA DEVICE, INC. "LANDISK Series" support.
-
-config SH_TITAN
-	bool "TITAN"
-	depends on CPU_SUBTYPE_SH7751R
-	select CPU_HAS_IPR_IRQ
-	select SYS_SUPPORTS_PCI
-	help
-	  Select Titan if you are configuring for a Nimble Microsystems
-	  NetEngine NP51R.
-
-config SH_SHMIN
-	bool "SHMIN"
-	depends on CPU_SUBTYPE_SH7706
-	select CPU_HAS_IPR_IRQ
-	help
-	  Select SHMIN if configuring for the SHMIN board.
-
-config SH_LBOX_RE2
-	bool "L-BOX RE2"
-	depends on CPU_SUBTYPE_SH7751R
-	select SYS_SUPPORTS_PCI
-	help
-	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
-
-config SH_X3PROTO
-	bool "SH-X3 Prototype board"
-	depends on CPU_SUBTYPE_SHX3
-
-config SH_MAGIC_PANEL_R2
-	bool "Magic Panel R2"
-	depends on CPU_SUBTYPE_SH7720
-	help
-	  Select Magic Panel R2 if configuring for Magic Panel R2.
-
-config SH_CAYMAN
-	bool "Hitachi Cayman"
-	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
-	select SYS_SUPPORTS_PCI
-
-endmenu
-
-source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
-source "arch/sh/boards/renesas/r7780rp/Kconfig"
-source "arch/sh/boards/renesas/sdk7780/Kconfig"
-source "arch/sh/boards/magicpanelr2/Kconfig"
+source "arch/sh/boards/Kconfig"
 
 menu "Timer and clock configuration"
 
@@ -685,9 +487,27 @@ config CRASH_DUMP
 
 	  For more details see Documentation/kdump/kdump.txt
 
+config SECCOMP
+	bool "Enable seccomp to safely compute untrusted bytecode"
+	depends on PROC_FS
+	default y
+	help
+	  This kernel feature is useful for number crunching applications
+	  that may need to compute untrusted bytecode during their
+	  execution. By using pipes or other transports made available to
+	  the process as file descriptors supporting the read/write
+	  syscalls, it's possible to isolate those applications in
+	  their own address space using seccomp. Once seccomp is
+	  enabled via prctl, it cannot be disabled and the task is only
+	  allowed to execute a few safe syscalls defined by each seccomp
+	  mode.
+
+	  If unsure, say N.
+
 config SMP
 	bool "Symmetric multi-processing support"
 	depends on SYS_SUPPORTS_SMP
+	select USE_GENERIC_SMP_HELPERS
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 0f4549860226..4d2d102e00d5 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -36,7 +36,8 @@ config EARLY_SCIF_CONSOLE_PORT
 	default "0xff804000" if CPU_SUBTYPE_MXG
 	default "0xffc30000" if CPU_SUBTYPE_SHX3
 	default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \
-				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366
+				CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \
+				CPU_SUBTYPE_SH7343
 	default "0xffe80000" if CPU_SH4
 	default "0xffea0000" if CPU_SUBTYPE_SH7785
 	default "0xfffe8000" if CPU_SUBTYPE_SH7203
@@ -181,7 +182,7 @@ if SUPERH64
 
 config SH64_PROC_ASIDS
 	bool "Debug: report ASIDs through /proc/asids"
-	depends on PROC_FS
+	depends on PROC_FS && MMU
 
 config SH64_SR_WATCH
 	bool "Debug: set SR.WATCH to enable hardware watchpoints and trace"
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index fb7b1b15e392..01d85c74481d 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -68,7 +68,7 @@ OBJCOPYFLAGS	:= -O binary -R .note -R .note.gnu.build-id -R .comment \
 defaultimage-$(CONFIG_SUPERH32)	:= zImage
 
 # Set some sensible Kbuild defaults
-KBUILD_DEFCONFIG	:= r7780mp_defconfig
+KBUILD_DEFCONFIG	:= shx3_defconfig
 KBUILD_IMAGE		:= $(defaultimage-y)
 
 #
@@ -91,47 +91,32 @@ LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64+4'
 LDFLAGS			+= -EB
 endif
 
-KBUILD_CFLAGS		+= -pipe $(cflags-y)
-KBUILD_AFLAGS		+= $(cflags-y)
-
 head-y			:= arch/sh/kernel/init_task.o
 head-$(CONFIG_SUPERH32)	+= arch/sh/kernel/head_32.o
 head-$(CONFIG_SUPERH64)	+= arch/sh/kernel/head_64.o
 
-LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-
-core-y				+= arch/sh/kernel/ arch/sh/mm/
+core-y				+= arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
 core-$(CONFIG_SH_FPU_EMU)	+= arch/sh/math-emu/
 
-# Boards
-machdir-$(CONFIG_SH_SOLUTION_ENGINE)		+= se/770x
-machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= se/7722
-machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= se/7751
-machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= se/7780
-machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= se/7343
-machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= se/7721
-machdir-$(CONFIG_SH_HP6XX)			+= hp6xx
-machdir-$(CONFIG_SH_DREAMCAST)			+= dreamcast
-machdir-$(CONFIG_SH_SH03)			+= sh03
-machdir-$(CONFIG_SH_SECUREEDGE5410)		+= snapgear
-machdir-$(CONFIG_SH_RTS7751R2D)			+= renesas/rts7751r2d
-machdir-$(CONFIG_SH_7751_SYSTEMH)		+= renesas/systemh
-machdir-$(CONFIG_SH_EDOSK7705)			+= renesas/edosk7705
-machdir-$(CONFIG_SH_HIGHLANDER)			+= renesas/r7780rp
-machdir-$(CONFIG_SH_MIGOR)			+= renesas/migor
-machdir-$(CONFIG_SH_SDK7780)			+= renesas/sdk7780
-machdir-$(CONFIG_SH_X3PROTO)			+= renesas/x3proto
-machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= superh/microdev
-machdir-$(CONFIG_SH_LANDISK)			+= landisk
-machdir-$(CONFIG_SH_TITAN)			+= titan
-machdir-$(CONFIG_SH_SHMIN)			+= shmin
-machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= se/7206
-machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= se/7619
-machdir-$(CONFIG_SH_LBOX_RE2)			+= lboxre2
-machdir-$(CONFIG_SH_MAGIC_PANEL_R2)		+= magicpanelr2
-machdir-$(CONFIG_SH_CAYMAN)			+= cayman
-
-incdir-y	:= $(notdir $(machdir-y))
+# Mach groups
+machdir-$(CONFIG_SOLUTION_ENGINE)		+= mach-se
+machdir-$(CONFIG_SH_HP6XX)			+= mach-hp6xx
+machdir-$(CONFIG_SH_DREAMCAST)			+= mach-dreamcast
+machdir-$(CONFIG_SH_SH03)			+= mach-sh03
+machdir-$(CONFIG_SH_SECUREEDGE5410)		+= mach-snapgear
+machdir-$(CONFIG_SH_RTS7751R2D)			+= mach-r2d
+machdir-$(CONFIG_SH_7751_SYSTEMH)		+= mach-systemh
+machdir-$(CONFIG_SH_EDOSK7705)			+= mach-edosk7705
+machdir-$(CONFIG_SH_HIGHLANDER)			+= mach-highlander
+machdir-$(CONFIG_SH_MIGOR)			+= mach-migor
+machdir-$(CONFIG_SH_SDK7780)			+= mach-sdk7780
+machdir-$(CONFIG_SH_X3PROTO)			+= mach-x3proto
+machdir-$(CONFIG_SH_SH7763RDP)			+= mach-sh7763rdp
+machdir-$(CONFIG_SH_SH4202_MICRODEV)		+= mach-microdev
+machdir-$(CONFIG_SH_LANDISK)			+= mach-landisk
+machdir-$(CONFIG_SH_TITAN)			+= mach-titan
+machdir-$(CONFIG_SH_LBOX_RE2)			+= mach-lboxre2
+machdir-$(CONFIG_SH_CAYMAN)			+= mach-cayman
 
 ifneq ($(machdir-y),)
 core-y	+= $(addprefix arch/sh/boards/, \
@@ -141,67 +126,40 @@ endif
 # Companion chips
 core-$(CONFIG_HD6446X_SERIES)	+= arch/sh/cchips/hd6446x/
 
-cpuincdir-$(CONFIG_CPU_SH2)	:= cpu-sh2
-cpuincdir-$(CONFIG_CPU_SH2A)	:= cpu-sh2a
-cpuincdir-$(CONFIG_CPU_SH3)	:= cpu-sh3
-cpuincdir-$(CONFIG_CPU_SH4)	:= cpu-sh4
-cpuincdir-$(CONFIG_CPU_SH5)	:= cpu-sh5
-
-libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
-libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
-libs-y				+= $(LIBGCC)
+#
+# CPU header paths
+#
+# These are ordered by optimization level. A CPU family that is a subset
+# of another (ie, SH-2A / SH-2), is picked up first, with increasing
+# levels of genericness if nothing more suitable is situated in the
+# hierarchy.
+#
+# As an example, in order of preference, SH-2A > SH-2 > common definitions.
+#
+cpuincdir-$(CONFIG_CPU_SH2A)	+= cpu-sh2a
+cpuincdir-$(CONFIG_CPU_SH2)	+= cpu-sh2
+cpuincdir-$(CONFIG_CPU_SH3)	+= cpu-sh3
+cpuincdir-$(CONFIG_CPU_SH4)	+= cpu-sh4
+cpuincdir-$(CONFIG_CPU_SH5)	+= cpu-sh5
+cpuincdir-y			+= cpu-common	# Must be last
 
 drivers-y			+= arch/sh/drivers/
 drivers-$(CONFIG_OPROFILE)	+= arch/sh/oprofile/
 
 boot := arch/sh/boot
 
-ifneq ($(KBUILD_SRC),)
-incdir-prefix	:= $(srctree)/include/asm-sh/
-else
-incdir-prefix	:=
-endif
+cflags-y	+= $(foreach d, $(cpuincdir-y), -Iarch/sh/include/$(d)) \
+		   $(foreach d, $(machdir-y), -Iarch/sh/include/$(d))
 
-#	Update machine arch and proc symlinks if something which affects
-#	them changed.  We use .arch and .mach to indicate when they were
-#	updated last, otherwise make uses the target directory mtime.
+KBUILD_CFLAGS		+= -pipe $(cflags-y)
+KBUILD_CPPFLAGS		+= $(cflags-y)
+KBUILD_AFLAGS		+= $(cflags-y)
 
-include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \
-		     include/config/auto.conf FORCE
-	@echo '  SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)'
-	$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
-	$(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu
-	@touch $@
+LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
 
-#	Most boards have their own mach directories.  For the ones that
-#	don't, just reference the parent directory so the semantics are
-#	kept roughly the same.
-#
-#	When multiple boards are compiled in at the same time, preference
-#	for the mach link is given to whichever has a directory for its
-#	headers. However, this is only a workaround until platforms that
-#	can live in the same kernel image back away from relying on the
-#	mach link.
-
-include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \
-		      include/config/auto.conf FORCE
-	$(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi
-	$(Q)rm -f include/asm-sh/mach
-	$(Q)for i in $(incdir-y); do \
-	if [ -d $(srctree)/include/asm-sh/$$i ]; then \
-		echo -n '  SYMLINK include/asm-sh/mach -> '; \
-		echo -e "include/asm-sh/$$i"; \
-		ln -fsn $(incdir-prefix)$$i \
-			include/asm-sh/mach; \
-	else \
-		if [ ! -d include/asm-sh/mach ]; then \
-			echo -n '  SYMLINK include/asm-sh/mach -> '; \
-			echo -e 'include/asm-sh'; \
-			ln -fsn $(incdir-prefix)../asm-sh include/asm-sh/mach; \
-		fi; \
-	fi; \
-	done
-	@touch $@
+libs-$(CONFIG_SUPERH32)		:= arch/sh/lib/	$(libs-y)
+libs-$(CONFIG_SUPERH64)		:= arch/sh/lib64/ $(libs-y)
+libs-y				+= $(LIBGCC)
 
 PHONY += maketools FORCE
 
@@ -215,8 +173,7 @@ zImage uImage uImage.srec vmlinux.srec: vmlinux
 
 compressed: zImage
 
-archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools \
-	     arch/sh/lib64/syscalltab.h
+archprepare: maketools arch/sh/lib64/syscalltab.h
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
@@ -258,6 +215,4 @@ arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S
 	$(call filechk,gen-syscalltab)
 
 CLEAN_FILES += arch/sh/lib64/syscalltab.h \
-	       include/asm-sh/machtypes.h \
-	       include/asm-sh/cpu include/asm-sh/.cpu \
-	       include/asm-sh/mach include/asm-sh/.mach
+	       include/asm-sh/machtypes.h
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig
new file mode 100644
index 000000000000..ae194869fd60
--- /dev/null
+++ b/arch/sh/boards/Kconfig
@@ -0,0 +1,258 @@
+menu "Board support"
+
+config SOLUTION_ENGINE
+	bool
+
+config SH_SOLUTION_ENGINE
+	bool "SolutionEngine"
+	select SOLUTION_ENGINE
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \
+	  CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \
+	  CPU_SUBTYPE_SH7750R 
+	help
+	  Select SolutionEngine if configuring for a Hitachi SH7705, SH7709,
+	  SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board.
+
+config SH_7206_SOLUTION_ENGINE
+	bool "SolutionEngine7206"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7206
+	help
+	  Select 7206 SolutionEngine if configuring for a Hitachi SH7206
+	  evaluation board.
+
+config SH_7619_SOLUTION_ENGINE
+	bool "SolutionEngine7619"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7619
+	help
+	  Select 7619 SolutionEngine if configuring for a Hitachi SH7619
+	  evaluation board.
+	
+config SH_7721_SOLUTION_ENGINE
+	bool "SolutionEngine7721"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7721
+	help
+	  Select 7721 SolutionEngine if configuring for a Hitachi SH7721
+	  evaluation board.
+
+config SH_7722_SOLUTION_ENGINE
+	bool "SolutionEngine7722"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7722
+	help
+	  Select 7722 SolutionEngine if configuring for a Hitachi SH772
+	  evaluation board.
+
+config SH_7751_SOLUTION_ENGINE
+	bool "SolutionEngine7751"
+	select SOLUTION_ENGINE
+	select CPU_HAS_IPR_IRQ
+	depends on CPU_SUBTYPE_SH7751
+	help
+	  Select 7751 SolutionEngine if configuring for a Hitachi SH7751
+	  evaluation board.
+	  
+config SH_7780_SOLUTION_ENGINE
+	bool "SolutionEngine7780"
+	select SOLUTION_ENGINE
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  Select 7780 SolutionEngine if configuring for a Renesas SH7780
+	  evaluation board.
+
+config SH_7343_SOLUTION_ENGINE
+	bool "SolutionEngine7343"
+	select SOLUTION_ENGINE
+	depends on CPU_SUBTYPE_SH7343
+	help
+	  Select 7343 SolutionEngine if configuring for a Hitachi
+	  SH7343 (SH-Mobile 3AS) evaluation board.
+
+config SH_7751_SYSTEMH
+	bool "SystemH7751R"
+	depends on CPU_SUBTYPE_SH7751R
+	help
+	  Select SystemH if you are configuring for a Renesas SystemH
+	  7751R evaluation board.
+
+config SH_HP6XX
+	bool "HP6XX"
+	select SYS_SUPPORTS_APM_EMULATION
+	select HD6446X_SERIES
+	depends on CPU_SUBTYPE_SH7709
+	help
+	  Select HP6XX if configuring for a HP jornada HP6xx.
+	  More information (hardware only) at
+	  <http://www.hp.com/jornada/>.
+
+config SH_DREAMCAST
+	bool "Dreamcast"
+	select SYS_SUPPORTS_PCI
+	depends on CPU_SUBTYPE_SH7091
+	help
+	  Select Dreamcast if configuring for a SEGA Dreamcast.
+	  More information at <http://www.linux-sh.org>
+
+config SH_SH03
+	bool "Interface CTP/PCI-SH03"
+	depends on CPU_SUBTYPE_SH7751
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  CTP/PCI-SH03 is a CPU module computer that is produced
+	  by Interface Corporation.
+	  More information at <http://www.interface.co.jp>
+
+config SH_SECUREEDGE5410
+	bool "SecureEdge5410"
+	depends on CPU_SUBTYPE_SH7751R
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  Select SecureEdge5410 if configuring for a SnapGear SH board.
+	  This includes both the OEM SecureEdge products as well as the
+	  SME product line.
+
+config SH_RTS7751R2D
+	bool "RTS7751R2D"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+	help
+	  Select RTS7751R2D if configuring for a Renesas Technology
+	  Sales SH-Graphics board.
+
+config SH_RSK7203
+	bool "RSK7203"
+	depends on CPU_SUBTYPE_SH7203
+
+config SH_SDK7780
+	bool "SDK7780R3"
+	depends on CPU_SUBTYPE_SH7780
+	select SYS_SUPPORTS_PCI
+	help
+	  Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3
+	  evaluation board.
+
+config SH_HIGHLANDER
+	bool "Highlander"
+	depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+
+config SH_SH7785LCR
+	bool "SH7785LCR"
+	depends on CPU_SUBTYPE_SH7785
+	select SYS_SUPPORTS_PCI
+	select IO_TRAPPED
+
+config SH_SH7785LCR_29BIT_PHYSMAPS
+	bool "SH7785LCR 29bit physmaps"
+	depends on SH_SH7785LCR
+	default y
+	help
+	  This board has 2 physical memory maps. It can be changed with
+	  DIP switch(S2-5). If you set the DIP switch for S2-5 = ON,
+	  you can access all on-board device in 29bit address mode.
+
+config SH_MIGOR
+	bool "Migo-R"
+	depends on CPU_SUBTYPE_SH7722
+	help
+	  Select Migo-R if configuring for the SH7722 Migo-R platform
+          by Renesas System Solutions Asia Pte. Ltd.
+
+config SH_AP325RXA
+	bool "AP-325RXA"
+	depends on CPU_SUBTYPE_SH7723
+	help
+	  Renesas "AP-325RXA" support.
+	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
+
+config SH_SH7763RDP
+	bool "SH7763RDP"
+	depends on CPU_SUBTYPE_SH7763
+	help
+	  Select SH7763RDP if configuring for a Renesas SH7763
+	  evaluation board.
+
+config SH_EDOSK7705
+	bool "EDOSK7705"
+	depends on CPU_SUBTYPE_SH7705
+
+config SH_SH4202_MICRODEV
+	bool "SH4-202 MicroDev"
+	depends on CPU_SUBTYPE_SH4_202
+	help
+	  Select SH4-202 MicroDev if configuring for a SuperH MicroDev board
+	  with an SH4-202 CPU.
+
+config SH_LANDISK
+	bool "LANDISK"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	help
+	  I-O DATA DEVICE, INC. "LANDISK Series" support.
+
+config SH_TITAN
+	bool "TITAN"
+	depends on CPU_SUBTYPE_SH7751R
+	select CPU_HAS_IPR_IRQ
+	select SYS_SUPPORTS_PCI
+	help
+	  Select Titan if you are configuring for a Nimble Microsystems
+	  NetEngine NP51R.
+
+config SH_SHMIN
+	bool "SHMIN"
+	depends on CPU_SUBTYPE_SH7706
+	select CPU_HAS_IPR_IRQ
+	help
+	  Select SHMIN if configuring for the SHMIN board.
+
+config SH_LBOX_RE2
+	bool "L-BOX RE2"
+	depends on CPU_SUBTYPE_SH7751R
+	select SYS_SUPPORTS_PCI
+	help
+	  Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
+
+config SH_X3PROTO
+	bool "SH-X3 Prototype board"
+	depends on CPU_SUBTYPE_SHX3
+
+config SH_MAGIC_PANEL_R2
+	bool "Magic Panel R2"
+	depends on CPU_SUBTYPE_SH7720
+	help
+	  Select Magic Panel R2 if configuring for Magic Panel R2.
+
+config SH_CAYMAN
+	bool "Hitachi Cayman"
+	depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103
+	select SYS_SUPPORTS_PCI
+
+endmenu
+
+source "arch/sh/boards/mach-r2d/Kconfig"
+source "arch/sh/boards/mach-highlander/Kconfig"
+source "arch/sh/boards/mach-sdk7780/Kconfig"
+source "arch/sh/boards/mach-migor/Kconfig"
+
+if SH_MAGIC_PANEL_R2
+
+menu "Magic Panel R2 options"
+
+config SH_MAGIC_PANEL_R2_VERSION
+	int SH_MAGIC_PANEL_R2_VERSION
+	default "3"
+	help
+	  Set the version of the Magic Panel R2
+
+endmenu
+
+endif
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
new file mode 100644
index 000000000000..463022c7df3c
--- /dev/null
+++ b/arch/sh/boards/Makefile
@@ -0,0 +1,8 @@
+#
+# Specific board support, not covered by a mach group.
+#
+obj-$(CONFIG_SH_AP325RXA)	+= board-ap325rxa.o
+obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
+obj-$(CONFIG_SH_RSK7203)	+= board-rsk7203.o
+obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
+obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
new file mode 100644
index 000000000000..025d4fe55a58
--- /dev/null
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -0,0 +1,316 @@
+/*
+ * Renesas - AP-325RXA
+ * (Compatible with Algo System ., LTD. - AP-320A)
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Author : Yusuke Goda <goda.yuske@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/smc911x.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/io.h>
+#include <asm/clock.h>
+
+static struct smc911x_platdata smc911x_info = {
+	.flags = SMC911X_USE_32BIT,
+	.irq_flags = IRQF_TRIGGER_LOW,
+};
+
+static struct resource smc9118_resources[] = {
+	[0] = {
+		.start	= 0xb6080000,
+		.end	= 0xb60fffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 35,
+		.end	= 35,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device smc9118_device = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc9118_resources),
+	.resource	= smc9118_resources,
+	.dev		= {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
+	{
+		 .name = "uboot",
+		 .offset = 0,
+		 .size = (1 * 1024 * 1024),
+		 .mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		 .name = "kernel",
+		 .offset = MTDPART_OFS_APPEND,
+		 .size = (2 * 1024 * 1024),
+	}, {
+		 .name = "other",
+		 .offset = MTDPART_OFS_APPEND,
+		 .size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data ap325rxa_nor_flash_data = {
+	.width		= 2,
+	.parts		= ap325rxa_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(ap325rxa_nor_flash_partitions),
+};
+
+static struct resource ap325rxa_nor_flash_resources[] = {
+	[0] = {
+		.name	= "NOR Flash",
+		.start	= 0x00000000,
+		.end	= 0x00ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device ap325rxa_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= ap325rxa_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(ap325rxa_nor_flash_resources),
+	.dev		= {
+		.platform_data = &ap325rxa_nor_flash_data,
+	},
+};
+
+#define FPGA_LCDREG	0xB4100180
+#define FPGA_BKLREG	0xB4100212
+#define FPGA_LCDREG_VAL	0x0018
+#define PORT_PHCR	0xA405010E
+#define PORT_PLCR	0xA4050114
+#define PORT_PMCR	0xA4050116
+#define PORT_PRCR	0xA405011C
+#define PORT_PSCR	0xA405011E
+#define PORT_PZCR	0xA405014C
+#define PORT_HIZCRA	0xA4050158
+#define PORT_MSELCRB	0xA4050182
+#define PORT_PSDR	0xA405013E
+#define PORT_PZDR	0xA405016C
+#define PORT_PSELD	0xA4050154
+
+static void ap320_wvga_power_on(void *board_data)
+{
+	msleep(100);
+
+	/* ASD AP-320/325 LCD ON */
+	ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG);
+
+	/* backlight */
+	ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR);
+	ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR);
+	ctrl_outw(0x100, FPGA_BKLREG);
+}
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.clock_source = LCDC_CLK_EXTERNAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = RGB18,
+		.clock_divider = 1,
+		.lcd_cfg = {
+			.name = "LB070WV1",
+			.xres = 800,
+			.yres = 480,
+			.left_margin = 40,
+			.right_margin = 160,
+			.hsync_len = 8,
+			.upper_margin = 63,
+			.lower_margin = 80,
+			.vsync_len = 1,
+			.sync = 0, /* hsync and vsync are active low */
+		},
+		.board_cfg = {
+			.display_on = ap320_wvga_power_on,
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe941fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev		= {
+		.platform_data	= &lcdc_info,
+	},
+};
+
+#ifdef CONFIG_I2C
+static unsigned char camera_ncm03j_magic[] =
+{
+	0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
+	0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36,
+	0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F,
+	0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55,
+	0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12,
+	0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0,
+	0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F,
+	0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A,
+	0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A,
+	0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A,
+	0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56,
+	0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37,
+	0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A,
+	0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56,
+	0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC,
+	0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
+};
+
+static int camera_set_capture(struct soc_camera_platform_info *info,
+			      int enable)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int ret = 0;
+	int i;
+
+	if (!enable)
+		return 0; /* no disable for now */
+
+	for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
+		u_int8_t buf[8];
+
+		msg.addr = 0x6e;
+		msg.buf = buf;
+		msg.len = 2;
+		msg.flags = 0;
+
+		buf[0] = camera_ncm03j_magic[i];
+		buf[1] = camera_ncm03j_magic[i + 1];
+
+		ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+	}
+
+	return ret;
+}
+
+static struct soc_camera_platform_info camera_info = {
+	.iface = 0,
+	.format_name = "UYVY",
+	.format_depth = 16,
+	.format = {
+		.pixelformat = V4L2_PIX_FMT_UYVY,
+		.colorspace = V4L2_COLORSPACE_SMPTE170M,
+		.width = 640,
+		.height = 480,
+	},
+	.bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+	.set_capture = camera_set_capture,
+};
+
+static struct platform_device camera_device = {
+	.name		= "soc_camera_platform",
+	.dev		= {
+		.platform_data	= &camera_info,
+	},
+};
+#endif /* CONFIG_I2C */
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+};
+
+static struct resource ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 52,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.num_resources	= ARRAY_SIZE(ceu_resources),
+	.resource	= ceu_resources,
+	.dev		= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+};
+
+static struct platform_device *ap325rxa_devices[] __initdata = {
+	&smc9118_device,
+	&ap325rxa_nor_flash_device,
+	&lcdc_device,
+	&ceu_device,
+#ifdef CONFIG_I2C
+	&camera_device,
+#endif
+};
+
+static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
+};
+
+static int __init ap325rxa_devices_setup(void)
+{
+	clk_always_enable("mstp200"); /* LCDC */
+	clk_always_enable("mstp203"); /* CEU */
+
+	platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
+
+	i2c_register_board_info(0, ap325rxa_i2c_devices,
+				ARRAY_SIZE(ap325rxa_i2c_devices));
+ 
+	return platform_add_devices(ap325rxa_devices,
+				ARRAY_SIZE(ap325rxa_devices));
+}
+device_initcall(ap325rxa_devices_setup);
+
+static void __init ap325rxa_setup(char **cmdline_p)
+{
+	/* LCDC configuration */
+	ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR);
+	ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR);
+	ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR);
+	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA);
+
+	/* CEU */
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD);
+	ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR);
+	ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR);
+}
+
+static struct sh_machine_vector mv_ap325rxa __initmv = {
+	.mv_name = "AP-325RXA",
+	.mv_setup = ap325rxa_setup,
+};
diff --git a/arch/sh/boards/magicpanelr2/setup.c b/arch/sh/boards/board-magicpanelr2.c
index f3b8b07ea5d6..f3b8b07ea5d6 100644
--- a/arch/sh/boards/magicpanelr2/setup.c
+++ b/arch/sh/boards/board-magicpanelr2.c
diff --git a/arch/sh/boards/board-rsk7203.c b/arch/sh/boards/board-rsk7203.c
new file mode 100644
index 000000000000..ffbedc59a973
--- /dev/null
+++ b/arch/sh/boards/board-rsk7203.c
@@ -0,0 +1,136 @@
+/*
+ * Renesas Technology Europe RSK+ 7203 Support.
+ *
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <linux/smc911x.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static struct smc911x_platdata smc911x_info = {
+	.flags		= SMC911X_USE_16BIT,
+	.irq_flags	= IRQF_TRIGGER_LOW,
+};
+
+static struct resource smc911x_resources[] = {
+	[0] = {
+		.start		= 0x24000000,
+		.end		= 0x24000000 + 0x100,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 64,
+		.end		= 64,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc911x_device = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc911x_resources),
+	.resource	= smc911x_resources,
+	.dev		= {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static const char *probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition *parsed_partitions;
+
+static struct mtd_partition rsk7203_partitions[] = {
+	{
+		.name		= "Bootloader",
+		.offset		= 0x00000000,
+		.size		= 0x00040000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 0x001c0000,
+	}, {
+		.name		= "Flash_FS",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct physmap_flash_data flash_data = {
+	.width		= 2,
+};
+
+static struct resource flash_resource = {
+	.start		= 0x20000000,
+	.end		= 0x20400000,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &flash_resource,
+	.num_resources	= 1,
+	.dev		= {
+		.platform_data = &flash_data,
+	},
+};
+
+static struct mtd_info *flash_mtd;
+
+static struct map_info rsk7203_flash_map = {
+	.name		= "RSK+ Flash",
+	.size		= 0x400000,
+	.bankwidth	= 2,
+};
+
+static void __init set_mtd_partitions(void)
+{
+	int nr_parts = 0;
+
+	simple_map_init(&rsk7203_flash_map);
+	flash_mtd = do_map_probe("cfi_probe", &rsk7203_flash_map);
+	nr_parts = parse_mtd_partitions(flash_mtd, probes,
+					&parsed_partitions, 0);
+	/* If there is no partition table, used the hard coded table */
+	if (nr_parts <= 0) {
+		flash_data.parts = rsk7203_partitions;
+		flash_data.nr_parts = ARRAY_SIZE(rsk7203_partitions);
+	} else {
+		flash_data.nr_parts = nr_parts;
+		flash_data.parts = parsed_partitions;
+	}
+}
+
+
+static struct platform_device *rsk7203_devices[] __initdata = {
+	&smc911x_device,
+	&flash_device,
+};
+
+static int __init rsk7203_devices_setup(void)
+{
+	set_mtd_partitions();
+	return platform_add_devices(rsk7203_devices,
+				    ARRAY_SIZE(rsk7203_devices));
+}
+device_initcall(rsk7203_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rsk7203 __initmv = {
+	.mv_name        = "RSK+7203",
+};
diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c
new file mode 100644
index 000000000000..b95d674ee704
--- /dev/null
+++ b/arch/sh/boards/board-sh7785lcr.c
@@ -0,0 +1,302 @@
+/*
+ * Renesas Technology Corp. R0P7785LC0011RL Support.
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+#include <linux/fb.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pca-platform.h>
+#include <linux/i2c-algo-pca.h>
+#include <asm/heartbeat.h>
+#include <asm/sh7785lcr.h>
+
+/*
+ * NOTE: This board has 2 physical memory maps.
+ *	 Please look at include/asm-sh/sh7785lcr.h or hardware manual.
+ */
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PLD_LEDCR,
+		.end	= PLD_LEDCR,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 8,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "bootenv",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024,
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 4 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 4,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= NOR_FLASH_ADDR,
+		.end	= NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+	[0] = {
+		.name	= "r8a66597_hcd",
+		.start	= R8A66597_ADDR,
+		.end	= R8A66597_ADDR + R8A66597_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= "r8a66597_hcd",
+		.start	= 2,
+		.end	= 2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+	.name		= "r8a66597_hcd",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(r8a66597_usb_host_resources),
+	.resource	= r8a66597_usb_host_resources,
+};
+
+static struct resource sm501_resources[] = {
+	[0]	= {
+		.start	= SM107_MEM_ADDR,
+		.end	= SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1]	= {
+		.start	= SM107_REG_ADDR,
+		.end	= SM107_REG_ADDR + SM107_REG_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2]	= {
+		.start	= 10,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct fb_videomode sm501_default_mode_crt = {
+	.pixclock	= 35714,	/* 28MHz */
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 105,
+	.right_margin	= 16,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+	.hsync_len	= 39,
+	.vsync_len	= 2,
+	.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct fb_videomode sm501_default_mode_pnl = {
+	.pixclock	= 40000,	/* 25MHz */
+	.xres		= 640,
+	.yres		= 480,
+	.left_margin	= 2,
+	.right_margin	= 16,
+	.upper_margin	= 33,
+	.lower_margin	= 10,
+	.hsync_len	= 39,
+	.vsync_len	= 2,
+	.sync		= 0,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode_pnl,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT |
+			  SM501FB_FLAG_PANEL_NO_VBIASEN,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
+	.def_bpp	= 16,
+	.def_mode	= &sm501_default_mode_crt,
+	.flags		= SM501FB_FLAG_USE_INIT_MODE |
+			  SM501FB_FLAG_USE_HWCURSOR |
+			  SM501FB_FLAG_USE_HWACCEL |
+			  SM501FB_FLAG_DISABLE_AT_EXIT,
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+	.fb_route	= SM501_FB_OWN,
+	.fb_crt		= &sm501_pdata_fbsub_crt,
+	.fb_pnl		= &sm501_pdata_fbsub_pnl,
+};
+
+static struct sm501_initdata sm501_initdata = {
+	.gpio_high	= {
+		.set	= 0x00001fe0,
+		.mask	= 0x0,
+	},
+	.devices	= 0,
+	.mclk		= 84 * 1000000,
+	.m1xclk		= 112 * 1000000,
+};
+
+static struct sm501_platdata sm501_platform_data = {
+	.init		= &sm501_initdata,
+	.fb		= &sm501_fb_pdata,
+};
+
+static struct platform_device sm501_device = {
+	.name		= "sm501",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &sm501_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(sm501_resources),
+	.resource	= sm501_resources,
+};
+
+static struct resource i2c_resources[] = {
+	[0] = {
+		.start	= PCA9564_ADDR,
+		.end	= PCA9564_ADDR + PCA9564_SIZE - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+	},
+	[1] = {
+		.start	= 12,
+		.end	= 12,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
+	.gpio			= 0,
+	.i2c_clock_speed	= I2C_PCA_CON_330kHz,
+	.timeout		= 100,
+};
+
+static struct platform_device i2c_device = {
+	.name		= "i2c-pca-platform",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &i2c_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(i2c_resources),
+	.resource	= i2c_resources,
+};
+
+static struct platform_device *sh7785lcr_devices[] __initdata = {
+	&heartbeat_device,
+	&nor_flash_device,
+	&r8a66597_usb_host_device,
+	&sm501_device,
+	&i2c_device,
+};
+
+static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("r2025sd", 0x32),
+	},
+};
+
+static int __init sh7785lcr_devices_setup(void)
+{
+	i2c_register_board_info(0, sh7785lcr_i2c_devices,
+				ARRAY_SIZE(sh7785lcr_i2c_devices));
+
+	return platform_add_devices(sh7785lcr_devices,
+				    ARRAY_SIZE(sh7785lcr_devices));
+}
+__initcall(sh7785lcr_devices_setup);
+
+/* Initialize IRQ setting */
+void __init init_sh7785lcr_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+	plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+static void sh7785lcr_power_off(void)
+{
+	ctrl_outb(0x01, P2SEGADDR(PLD_POFCR));
+}
+
+/* Initialize the board */
+static void __init sh7785lcr_setup(char **cmdline_p)
+{
+	void __iomem *sm501_reg;
+
+	printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
+
+	pm_power_off = sh7785lcr_power_off;
+
+	/* sm501 DRAM configuration */
+	sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
+	writel(0x000307c2, sm501_reg);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sh7785lcr __initmv = {
+	.mv_name		= "SH7785LCR",
+	.mv_setup		= sh7785lcr_setup,
+	.mv_init_irq		= init_sh7785lcr_IRQ,
+};
+
diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/board-shmin.c
index 16e5dae8ecfb..16e5dae8ecfb 100644
--- a/arch/sh/boards/shmin/setup.c
+++ b/arch/sh/boards/board-shmin.c
diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/cayman/irq.c
deleted file mode 100644
index 30ec7bebfaf1..000000000000
--- a/arch/sh/boards/cayman/irq.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support
- *
- * This file handles the board specific parts of the Cayman interrupt system
- *
- * Copyright (C) 2002 Stuart Menefy
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/signal.h>
-#include <asm/cpu/irq.h>
-#include <asm/page.h>
-
-/* Setup for the SMSC FDC37C935 / LAN91C100FD */
-#define SMSC_IRQ         IRQ_IRL1
-
-/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
-#define PCI2_IRQ         IRQ_IRL3
-
-unsigned long epld_virt;
-
-#define EPLD_BASE        0x04002000
-#define EPLD_STATUS_BASE (epld_virt + 0x10)
-#define EPLD_MASK_BASE   (epld_virt + 0x20)
-
-/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto
-   the same SH-5 interrupt */
-
-static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id)
-{
-        printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n");
-	return IRQ_NONE;
-}
-
-static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id)
-{
-        printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq);
-	return IRQ_NONE;
-}
-
-static struct irqaction cayman_action_smsc = {
-	.name		= "Cayman SMSC Mux",
-	.handler	= cayman_interrupt_smsc,
-	.flags		= IRQF_DISABLED,
-};
-
-static struct irqaction cayman_action_pci2 = {
-	.name		= "Cayman PCI2 Mux",
-	.handler	= cayman_interrupt_pci2,
-	.flags		= IRQF_DISABLED,
-};
-
-static void enable_cayman_irq(unsigned int irq)
-{
-	unsigned long flags;
-	unsigned long mask;
-	unsigned int reg;
-	unsigned char bit;
-
-	irq -= START_EXT_IRQS;
-	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
-	bit = 1<<(irq % 8);
-	local_irq_save(flags);
-	mask = ctrl_inl(reg);
-	mask |= bit;
-	ctrl_outl(mask, reg);
-	local_irq_restore(flags);
-}
-
-void disable_cayman_irq(unsigned int irq)
-{
-	unsigned long flags;
-	unsigned long mask;
-	unsigned int reg;
-	unsigned char bit;
-
-	irq -= START_EXT_IRQS;
-	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
-	bit = 1<<(irq % 8);
-	local_irq_save(flags);
-	mask = ctrl_inl(reg);
-	mask &= ~bit;
-	ctrl_outl(mask, reg);
-	local_irq_restore(flags);
-}
-
-static void ack_cayman_irq(unsigned int irq)
-{
-	disable_cayman_irq(irq);
-}
-
-static void end_cayman_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_cayman_irq(irq);
-}
-
-static unsigned int startup_cayman_irq(unsigned int irq)
-{
-	enable_cayman_irq(irq);
-	return 0; /* never anything pending */
-}
-
-static void shutdown_cayman_irq(unsigned int irq)
-{
-	disable_cayman_irq(irq);
-}
-
-struct hw_interrupt_type cayman_irq_type = {
-	.typename	= "Cayman-IRQ",
-	.startup	= startup_cayman_irq,
-	.shutdown	= shutdown_cayman_irq,
-	.enable		= enable_cayman_irq,
-	.disable	= disable_cayman_irq,
-	.ack		= ack_cayman_irq,
-	.end		= end_cayman_irq,
-};
-
-int cayman_irq_demux(int evt)
-{
-	int irq = intc_evt_to_irq[evt];
-
-	if (irq == SMSC_IRQ) {
-		unsigned long status;
-		int i;
-
-		status = ctrl_inl(EPLD_STATUS_BASE) &
-			 ctrl_inl(EPLD_MASK_BASE) & 0xff;
-		if (status == 0) {
-			irq = -1;
-		} else {
-			for (i=0; i<8; i++) {
-				if (status & (1<<i))
-					break;
-			}
-			irq = START_EXT_IRQS + i;
-		}
-	}
-
-	if (irq == PCI2_IRQ) {
-		unsigned long status;
-		int i;
-
-		status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
-			 ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
-		if (status == 0) {
-			irq = -1;
-		} else {
-			for (i=0; i<8; i++) {
-				if (status & (1<<i))
-					break;
-			}
-			irq = START_EXT_IRQS + (3 * 8) + i;
-		}
-	}
-
-	return irq;
-}
-
-#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
-int cayman_irq_describe(char* p, int irq)
-{
-	if (irq < NR_INTC_IRQS) {
-		return intc_irq_describe(p, irq);
-	} else if (irq < NR_INTC_IRQS + 8) {
-		return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS);
-	} else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) {
-		return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24));
-	}
-
-	return 0;
-}
-#endif
-
-void init_cayman_irq(void)
-{
-	int i;
-
-	epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD");
-	if (!epld_virt) {
-		printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
-		return;
-	}
-
-	for (i=0; i<NR_EXT_IRQS; i++) {
-		irq_desc[START_EXT_IRQS + i].chip = &cayman_irq_type;
-	}
-
-	/* Setup the SMSC interrupt */
-	setup_irq(SMSC_IRQ, &cayman_action_smsc);
-	setup_irq(PCI2_IRQ, &cayman_action_pci2);
-}
diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/cayman/setup.c
deleted file mode 100644
index 8c9fa472d8f5..000000000000
--- a/arch/sh/boards/cayman/setup.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * arch/sh/mach-cayman/setup.c
- *
- * SH5 Cayman support
- *
- * Copyright (C) 2002  David J. Mckay & Benedict Gaster
- * Copyright (C) 2003 - 2007  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <asm/cpu/irq.h>
-
-/*
- * Platform Dependent Interrupt Priorities.
- */
-
-/* Using defaults defined in irq.h */
-#define	RES NO_PRIORITY		/* Disabled */
-#define IR0 IRL0_PRIORITY	/* IRLs */
-#define IR1 IRL1_PRIORITY
-#define IR2 IRL2_PRIORITY
-#define IR3 IRL3_PRIORITY
-#define PCA INTA_PRIORITY	/* PCI Ints */
-#define PCB INTB_PRIORITY
-#define PCC INTC_PRIORITY
-#define PCD INTD_PRIORITY
-#define SER TOP_PRIORITY
-#define ERR TOP_PRIORITY
-#define PW0 TOP_PRIORITY
-#define PW1 TOP_PRIORITY
-#define PW2 TOP_PRIORITY
-#define PW3 TOP_PRIORITY
-#define DM0 NO_PRIORITY		/* DMA Ints */
-#define DM1 NO_PRIORITY
-#define DM2 NO_PRIORITY
-#define DM3 NO_PRIORITY
-#define DAE NO_PRIORITY
-#define TU0 TIMER_PRIORITY	/* TMU Ints */
-#define TU1 NO_PRIORITY
-#define TU2 NO_PRIORITY
-#define TI2 NO_PRIORITY
-#define ATI NO_PRIORITY		/* RTC Ints */
-#define PRI NO_PRIORITY
-#define CUI RTC_PRIORITY
-#define ERI SCIF_PRIORITY	/* SCIF Ints */
-#define RXI SCIF_PRIORITY
-#define BRI SCIF_PRIORITY
-#define TXI SCIF_PRIORITY
-#define ITI TOP_PRIORITY	/* WDT Ints */
-
-/* Setup for the SMSC FDC37C935 */
-#define SMSC_SUPERIO_BASE	0x04000000
-#define SMSC_CONFIG_PORT_ADDR	0x3f0
-#define SMSC_INDEX_PORT_ADDR	SMSC_CONFIG_PORT_ADDR
-#define SMSC_DATA_PORT_ADDR	0x3f1
-
-#define SMSC_ENTER_CONFIG_KEY	0x55
-#define SMSC_EXIT_CONFIG_KEY	0xaa
-
-#define SMCS_LOGICAL_DEV_INDEX	0x07
-#define SMSC_DEVICE_ID_INDEX	0x20
-#define SMSC_DEVICE_REV_INDEX	0x21
-#define SMSC_ACTIVATE_INDEX	0x30
-#define SMSC_PRIMARY_BASE_INDEX  0x60
-#define SMSC_SECONDARY_BASE_INDEX 0x62
-#define SMSC_PRIMARY_INT_INDEX	0x70
-#define SMSC_SECONDARY_INT_INDEX 0x72
-
-#define SMSC_IDE1_DEVICE	1
-#define SMSC_KEYBOARD_DEVICE	7
-#define SMSC_CONFIG_REGISTERS	8
-
-#define SMSC_SUPERIO_READ_INDEXED(index) ({ \
-	outb((index), SMSC_INDEX_PORT_ADDR); \
-	inb(SMSC_DATA_PORT_ADDR); })
-#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \
-	outb((index), SMSC_INDEX_PORT_ADDR); \
-	outb((val),   SMSC_DATA_PORT_ADDR); })
-
-#define IDE1_PRIMARY_BASE	0x01f0
-#define IDE1_SECONDARY_BASE	0x03f6
-
-unsigned long smsc_superio_virt;
-
-int platform_int_priority[NR_INTC_IRQS] = {
-	IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD,	/* IRQ  0- 7 */
-	RES, RES, RES, RES, SER, ERR, PW3, PW2,	/* IRQ  8-15 */
-	PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES,	/* IRQ 16-23 */
-	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 24-31 */
-	TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI,	/* IRQ 32-39 */
-	RXI, BRI, TXI, RES, RES, RES, RES, RES,	/* IRQ 40-47 */
-	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 48-55 */
-	RES, RES, RES, RES, RES, RES, RES, ITI,	/* IRQ 56-63 */
-};
-
-static int __init smsc_superio_setup(void)
-{
-	unsigned char devid, devrev;
-
-	smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO");
-	if (!smsc_superio_virt) {
-		panic("Unable to remap SMSC SuperIO\n");
-	}
-
-	/* Initially the chip is in run state */
-	/* Put it into configuration state */
-	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-	/* Read device ID info */
-	devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
-	devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
-	printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev);
-
-	/* Select the keyboard device */
-	SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-
-	/* enable it */
-	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-
-	/* Select the interrupts */
-	/* On a PC keyboard is IRQ1, mouse is IRQ12 */
-	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
-	SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
-
-#ifdef CONFIG_IDE
-	/*
-	 * Only IDE1 exists on the Cayman
-	 */
-
-	/* Power it on */
-	SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22);
-
-	SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
-	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
-
-	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8,
-				   SMSC_PRIMARY_BASE_INDEX + 0);
-	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff,
-				   SMSC_PRIMARY_BASE_INDEX + 1);
-
-	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8,
-				   SMSC_SECONDARY_BASE_INDEX + 0);
-	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff,
-				   SMSC_SECONDARY_BASE_INDEX + 1);
-
-	SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX);
-
-	SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS,
-				   SMCS_LOGICAL_DEV_INDEX);
-
-	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
-	SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
-	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
-	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
-#endif
-
-	/* Exit the configuration state */
-	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
-
-	return 0;
-}
-__initcall(smsc_superio_setup);
-
-static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
-{
-	if (port < 0x400) {
-		extern unsigned long smsc_superio_virt;
-		return (void __iomem *)((port << 2) | smsc_superio_virt);
-	}
-
-	return (void __iomem *)port;
-}
-
-extern void init_cayman_irq(void);
-
-static struct sh_machine_vector mv_cayman __initmv = {
-	.mv_name		= "Hitachi Cayman",
-	.mv_nr_irqs		= 64,
-	.mv_ioport_map		= cayman_ioport_map,
-	.mv_init_irq		= init_cayman_irq,
-};
diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/dreamcast/irq.c
deleted file mode 100644
index 9d0673a9092a..000000000000
--- a/arch/sh/boards/dreamcast/irq.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*
- * arch/sh/boards/dreamcast/irq.c
- *
- * Holly IRQ support for the Sega Dreamcast.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- * Released under the terms of the GNU GPL v2.0
- */
-
-#include <linux/irq.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/dreamcast/sysasic.h>
-
-/* Dreamcast System ASIC Hardware Events -
-
-   The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
-   hardware events from system peripherals and triggering an SH7750 IRQ.
-   Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
-   set in the Event Mask Registers (EMRs).  When a hardware event is
-   triggered, it's corresponding bit in the Event Status Registers (ESRs)
-   is set, and that bit should be rewritten to the ESR to acknowledge that
-   event.
-
-   There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908.  Event
-   types can be found in include/asm-sh/dreamcast/sysasic.h. There are three
-   groups of EMRs that parallel the ESRs.  Each EMR group corresponds to an
-   IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928
-   triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9.
-
-   In the kernel, these events are mapped to virtual IRQs so that drivers can
-   respond to them as they would a normal interrupt.  In order to keep this
-   mapping simple, the events are mapped as:
-
-   6900/6910 - Events  0-31, IRQ 13
-   6904/6924 - Events 32-63, IRQ 11
-   6908/6938 - Events 64-95, IRQ  9
-
-*/
-
-#define ESR_BASE 0x005f6900    /* Base event status register */
-#define EMR_BASE 0x005f6910    /* Base event mask register */
-
-/* Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
-   1 = 0x6920, 2 = 0x6930; also determine the event offset */
-#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
-
-/* Return the hardware event's bit positon within the EMR/ESR */
-#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
-
-/* For each of these *_irq routines, the IRQ passed in is the virtual IRQ
-   (logically mapped to the corresponding bit for the hardware event). */
-
-/* Disable the hardware event by masking its bit in its EMR */
-static inline void disable_systemasic_irq(unsigned int irq)
-{
-        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
-        __u32 mask;
-
-        mask = inl(emr);
-        mask &= ~(1 << EVENT_BIT(irq));
-        outl(mask, emr);
-}
-
-/* Enable the hardware event by setting its bit in its EMR */
-static inline void enable_systemasic_irq(unsigned int irq)
-{
-        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
-        __u32 mask;
-
-        mask = inl(emr);
-        mask |= (1 << EVENT_BIT(irq));
-        outl(mask, emr);
-}
-
-/* Acknowledge a hardware event by writing its bit back to its ESR */
-static void ack_systemasic_irq(unsigned int irq)
-{
-        __u32 esr = ESR_BASE + (LEVEL(irq) << 2);
-        disable_systemasic_irq(irq);
-        outl((1 << EVENT_BIT(irq)), esr);
-}
-
-/* After a IRQ has been ack'd and responded to, it needs to be renabled */
-static void end_systemasic_irq(unsigned int irq)
-{
-        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-                enable_systemasic_irq(irq);
-}
-
-static unsigned int startup_systemasic_irq(unsigned int irq)
-{
-        enable_systemasic_irq(irq);
-
-        return 0;
-}
-
-static void shutdown_systemasic_irq(unsigned int irq)
-{
-        disable_systemasic_irq(irq);
-}
-
-struct hw_interrupt_type systemasic_int = {
-        .typename       = "System ASIC",
-        .startup        = startup_systemasic_irq,
-        .shutdown       = shutdown_systemasic_irq,
-        .enable         = enable_systemasic_irq,
-        .disable        = disable_systemasic_irq,
-        .ack            = ack_systemasic_irq,
-        .end            = end_systemasic_irq,
-};
-
-/*
- * Map the hardware event indicated by the processor IRQ to a virtual IRQ.
- */
-int systemasic_irq_demux(int irq)
-{
-        __u32 emr, esr, status, level;
-        __u32 j, bit;
-
-        switch (irq) {
-                case 13:
-                        level = 0;
-                        break;
-                case 11:
-                        level = 1;
-                        break;
-                case  9:
-                        level = 2;
-                        break;
-                default:
-                        return irq;
-        }
-        emr = EMR_BASE + (level << 4) + (level << 2);
-        esr = ESR_BASE + (level << 2);
-
-        /* Mask the ESR to filter any spurious, unwanted interrupts */
-        status = inl(esr);
-        status &= inl(emr);
-
-        /* Now scan and find the first set bit as the event to map */
-        for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
-                if (status & bit) {
-                        irq = HW_EVENT_IRQ_BASE + j + (level << 5);
-                        return irq;
-                }
-        }
-
-        /* Not reached */
-        return irq;
-}
diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/dreamcast/rtc.c
deleted file mode 100644
index b3a876a3b859..000000000000
--- a/arch/sh/boards/dreamcast/rtc.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/sh/boards/dreamcast/rtc.c
- *
- * Dreamcast AICA RTC routines.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
- * Copyright (c) 2002 Paul Mundt <lethal@chaoticdreams.org>
- *
- * Released under the terms of the GNU GPL v2.0.
- *
- */
-
-#include <linux/time.h>
-#include <asm/rtc.h>
-#include <asm/io.h>
-
-/* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in
-   seconds) to get the standard Unix Epoch when getting the time, and add
-   20 years when setting the time. */
-#define TWENTY_YEARS ((20 * 365LU + 5) * 86400)
-
-/* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit
-   registers.*/
-#define AICA_RTC_SECS_H		0xa0710000
-#define AICA_RTC_SECS_L		0xa0710004
-
-/**
- * aica_rtc_gettimeofday - Get the time from the AICA RTC
- * @ts: pointer to resulting timespec
- *
- * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch.
- */
-void aica_rtc_gettimeofday(struct timespec *ts)
-{
-	unsigned long val1, val2;
-
-	do {
-		val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
-			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
-
-		val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
-			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
-	} while (val1 != val2);
-
-	ts->tv_sec = val1 - TWENTY_YEARS;
-
-	/* Can't get nanoseconds with just a seconds counter. */
-	ts->tv_nsec = 0;
-}
-
-/**
- * aica_rtc_settimeofday - Set the AICA RTC to the current time
- * @secs: contains the time_t to set
- *
- * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter.
- */
-int aica_rtc_settimeofday(const time_t secs)
-{
-	unsigned long val1, val2;
-	unsigned long adj = secs + TWENTY_YEARS;
-
-	do {
-		ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
-		ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L);
-
-		val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
-			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
-
-		val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
-			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
-	} while (val1 != val2);
-
-	return 0;
-}
-
-void aica_time_init(void)
-{
-	rtc_sh_get_time = aica_rtc_gettimeofday;
-	rtc_sh_set_time = aica_rtc_settimeofday;
-}
-
diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c
deleted file mode 100644
index 2581c8cd5df7..000000000000
--- a/arch/sh/boards/dreamcast/setup.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * arch/sh/boards/dreamcast/setup.c
- *
- * Hardware support for the Sega Dreamcast.
- *
- * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@linuxdc.org>
- * Copyright (c) 2002, 2003, 2004 Paul Mundt <lethal@linux-sh.org>
- *
- * This file is part of the LinuxDC project (www.linuxdc.org)
- *
- * Released under the terms of the GNU GPL v2.0.
- *
- * This file originally bore the message (with enclosed-$):
- *	Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp
- *	SEGA Dreamcast support
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/device.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/rtc.h>
-#include <asm/machvec.h>
-#include <asm/mach/sysasic.h>
-
-extern struct hw_interrupt_type systemasic_int;
-extern void aica_time_init(void);
-extern int gapspci_init(void);
-extern int systemasic_irq_demux(int);
-
-static void __init dreamcast_setup(char **cmdline_p)
-{
-	int i;
-
-	/* Mask all hardware events */
-	/* XXX */
-
-	/* Acknowledge any previous events */
-	/* XXX */
-
-	__set_io_port_base(0xa0000000);
-
-	/* Assign all virtual IRQs to the System ASIC int. handler */
-	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
-		irq_desc[i].chip = &systemasic_int;
-
-	board_time_init = aica_time_init;
-
-#ifdef CONFIG_PCI
-	if (gapspci_init() < 0)
-		printk(KERN_WARNING "GAPSPCI was not detected.\n");
-#endif
-}
-
-static struct sh_machine_vector mv_dreamcast __initmv = {
-	.mv_name		= "Sega Dreamcast",
-	.mv_setup		= dreamcast_setup,
-	.mv_irq_demux		= systemasic_irq_demux,
-};
diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/hp6xx/pm.c
deleted file mode 100644
index d22f6eac9cca..000000000000
--- a/arch/sh/boards/hp6xx/pm.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * hp6x0 Power Management Routines
- *
- * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License.
- */
-#include <linux/init.h>
-#include <linux/suspend.h>
-#include <linux/errno.h>
-#include <linux/time.h>
-#include <asm/io.h>
-#include <asm/hd64461.h>
-#include <asm/hp6xx.h>
-#include <asm/cpu/dac.h>
-#include <asm/pm.h>
-
-#define STBCR		0xffffff82
-#define STBCR2		0xffffff88
-
-static int hp6x0_pm_enter(suspend_state_t state)
-{
-	u8 stbcr, stbcr2;
-#ifdef CONFIG_HD64461_ENABLER
-	u8 scr;
-	u16 hd64461_stbcr;
-#endif
-
-#ifdef CONFIG_HD64461_ENABLER
-	outb(0, HD64461_PCC1CSCIER);
-
-	scr = inb(HD64461_PCC1SCR);
-	scr |= HD64461_PCCSCR_VCC1;
-	outb(scr, HD64461_PCC1SCR);
-
-	hd64461_stbcr = inw(HD64461_STBCR);
-	hd64461_stbcr |= HD64461_STBCR_SPC1ST;
-	outw(hd64461_stbcr, HD64461_STBCR);
-#endif
-
-	ctrl_outb(0x1f, DACR);
-
-	stbcr = ctrl_inb(STBCR);
-	ctrl_outb(0x01, STBCR);
-
-	stbcr2 = ctrl_inb(STBCR2);
-	ctrl_outb(0x7f , STBCR2);
-
-	outw(0xf07f, HD64461_SCPUCR);
-
-	pm_enter();
-
-	outw(0, HD64461_SCPUCR);
-	ctrl_outb(stbcr, STBCR);
-	ctrl_outb(stbcr2, STBCR2);
-
-#ifdef CONFIG_HD64461_ENABLER
-	hd64461_stbcr = inw(HD64461_STBCR);
-	hd64461_stbcr &= ~HD64461_STBCR_SPC1ST;
-	outw(hd64461_stbcr, HD64461_STBCR);
-
-	outb(0x4c, HD64461_PCC1CSCIER);
-	outb(0x00, HD64461_PCC1CSCR);
-#endif
-
-	return 0;
-}
-
-static struct platform_suspend_ops hp6x0_pm_ops = {
-	.enter		= hp6x0_pm_enter,
-	.valid		= suspend_valid_only_mem,
-};
-
-static int __init hp6x0_pm_init(void)
-{
-	suspend_set_ops(&hp6x0_pm_ops);
-	return 0;
-}
-
-late_initcall(hp6x0_pm_init);
diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/hp6xx/pm_wakeup.S
deleted file mode 100644
index 45e9bf0b9115..000000000000
--- a/arch/sh/boards/hp6xx/pm_wakeup.S
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-
-#include <linux/linkage.h>
-#include <asm/cpu/mmu_context.h>
-
-#define k0	r0
-#define k1	r1
-#define k2	r2
-#define k3	r3
-#define k4	r4
-
-/*
- * Kernel mode register usage:
- *	k0	scratch
- *	k1	scratch
- *	k2	scratch (Exception code)
- *	k3	scratch (Return address)
- *	k4	scratch
- *	k5	reserved
- *	k6	Global Interrupt Mask (0--15 << 4)
- *	k7	CURRENT_THREAD_INFO (pointer to current thread info)
- */
-
-ENTRY(wakeup_start)
-! clear STBY bit
-	mov	#-126, k2
-   	and	#127, k0
-	mov.b	k0, @k2
-! enable refresh
-	mov.l	5f, k1
-	mov.w	6f, k0
-  	mov.w	k0, @k1
-! jump to handler
-	mov.l	2f, k2
-	mov.l	3f, k3
-	mov.l	@k2, k2
-
-	mov.l	4f, k1
-	jmp	@k1
-	nop
-
-	.align	2
-1:	.long	EXPEVT
-2:	.long	INTEVT
-3:	.long	ret_from_irq
-4:	.long	handle_exception
-5:	.long	0xffffff68
-6:	.word	0x0524
-
-ENTRY(wakeup_end)
-	nop
diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c
deleted file mode 100644
index 2f414ac3c690..000000000000
--- a/arch/sh/boards/hp6xx/setup.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * linux/arch/sh/boards/hp6xx/setup.c
- *
- * Copyright (C) 2002 Andriy Skulysh
- * Copyright (C) 2007 Kristoffer Ericson <Kristoffer_e1@hotmail.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only)
- */
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/hd64461.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/hp6xx.h>
-#include <asm/cpu/dac.h>
-
-#define	SCPCR	0xa4000116
-#define	SCPDR	0xa4000136
-
-/* CF Slot */
-static struct resource cf_ide_resources[] = {
-	[0] = {
-		.start = 0x15000000 + 0x1f0,
-		.end   = 0x15000000 + 0x1f0 + 0x08 - 0x01,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = 0x15000000 + 0x1fe,
-		.end   = 0x15000000 + 0x1fe + 0x01,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = 77,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cf_ide_device = {
-	.name		=  "pata_platform",
-	.id		=  -1,
-	.num_resources	= ARRAY_SIZE(cf_ide_resources),
-	.resource	= cf_ide_resources,
-};
-
-static struct platform_device jornadakbd_device = {
-	.name		= "jornada680_kbd",
-	.id		= -1,
-};
-
-static struct platform_device *hp6xx_devices[] __initdata = {
-	&cf_ide_device,
-	&jornadakbd_device,
-};
-
-static void __init hp6xx_init_irq(void)
-{
-	/* Gets touchscreen and powerbutton IRQ working */
-	plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static int __init hp6xx_devices_setup(void)
-{
-	return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices));
-}
-
-static void __init hp6xx_setup(char **cmdline_p)
-{
-	u8 v8;
-	u16 v;
-
-	v = inw(HD64461_STBCR);
-	v |=	HD64461_STBCR_SURTST | HD64461_STBCR_SIRST	|
-		HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST	|
-		HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST	|
-		HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST|
-		HD64461_STBCR_SAFECKE_IST;
-#ifndef CONFIG_HD64461_ENABLER
-	v |= HD64461_STBCR_SPC1ST;
-#endif
-	outw(v, HD64461_STBCR);
-	v = inw(HD64461_GPADR);
-	v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0;
-	outw(v, HD64461_GPADR);
-
-	outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR);
-
-#ifndef CONFIG_HD64461_ENABLER
-	outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR);
-#endif
-
-	sh_dac_output(0, DAC_SPEAKER_VOLUME);
-	sh_dac_disable(DAC_SPEAKER_VOLUME);
-	v8 = ctrl_inb(DACR);
-	v8 &= ~DACR_DAE;
-	ctrl_outb(v8,DACR);
-
-	v8 = ctrl_inb(SCPDR);
-	v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
-	v8 &= ~SCPDR_TS_SCAN_ENABLE;
-	ctrl_outb(v8, SCPDR);
-
-	v = ctrl_inw(SCPCR);
-	v &= ~SCPCR_TS_MASK;
-	v |= SCPCR_TS_ENABLE;
-	ctrl_outw(v, SCPCR);
-}
-device_initcall(hp6xx_devices_setup);
-
-static struct sh_machine_vector mv_hp6xx __initmv = {
-	.mv_name = "hp6xx",
-	.mv_setup = hp6xx_setup,
-	/* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */
-	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6,
-	.mv_irq_demux = hd64461_irq_demux,
-	/* Enable IRQ0 -> IRQ3 in IRQ_MODE */
-	.mv_init_irq = hp6xx_init_irq,
-};
diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c
deleted file mode 100644
index 0c15b0a50b99..000000000000
--- a/arch/sh/boards/landisk/gio.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * arch/sh/boards/landisk/gio.c - driver for landisk
- *
- * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
- * LANDISK and USL-5P Button, LED and GIO driver drive function.
- *
- *   Copylight (C) 2006 kogiidena
- *   Copylight (C) 2002 Atom Create Engineering Co., Ltd. *
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/smp_lock.h>
-#include <linux/kdev_t.h>
-#include <linux/cdev.h>
-#include <linux/fs.h>
-#include <asm/io.h>
-#include <asm/uaccess.h>
-#include <asm/landisk/gio.h>
-#include <asm/landisk/iodata_landisk.h>
-
-#define DEVCOUNT                4
-#define GIO_MINOR	        2	/* GIO minor no. */
-
-static dev_t dev;
-static struct cdev *cdev_p;
-static int openCnt;
-
-static int gio_open(struct inode *inode, struct file *filp)
-{
-	int minor;
-	int ret = -ENOENT;
-
-	lock_kernel();
-	minor = MINOR(inode->i_rdev);
-	if (minor < DEVCOUNT) {
-		if (openCnt > 0) {
-			ret = -EALREADY;
-		} else {
-			openCnt++;
-			ret = 0;
-		}
-	}
-	unlock_kernel();
-	return ret;
-}
-
-static int gio_close(struct inode *inode, struct file *filp)
-{
-	int minor;
-
-	minor = MINOR(inode->i_rdev);
-	if (minor < DEVCOUNT) {
-		openCnt--;
-	}
-	return 0;
-}
-
-static int gio_ioctl(struct inode *inode, struct file *filp,
-			     unsigned int cmd, unsigned long arg)
-{
-	unsigned int data;
-	static unsigned int addr = 0;
-
-	if (cmd & 0x01) {	/* write */
-		if (copy_from_user(&data, (int *)arg, sizeof(int))) {
-			return -EFAULT;
-		}
-	}
-
-	switch (cmd) {
-	case GIODRV_IOCSGIOSETADDR:	/* address set */
-		addr = data;
-		break;
-
-	case GIODRV_IOCSGIODATA1:	/* write byte */
-		ctrl_outb((unsigned char)(0x0ff & data), addr);
-		break;
-
-	case GIODRV_IOCSGIODATA2:	/* write word */
-		if (addr & 0x01) {
-			return -EFAULT;
-		}
-		ctrl_outw((unsigned short int)(0x0ffff & data), addr);
-		break;
-
-	case GIODRV_IOCSGIODATA4:	/* write long */
-		if (addr & 0x03) {
-			return -EFAULT;
-		}
-		ctrl_outl(data, addr);
-		break;
-
-	case GIODRV_IOCGGIODATA1:	/* read byte */
-		data = ctrl_inb(addr);
-		break;
-
-	case GIODRV_IOCGGIODATA2:	/* read word */
-		if (addr & 0x01) {
-			return -EFAULT;
-		}
-		data = ctrl_inw(addr);
-		break;
-
-	case GIODRV_IOCGGIODATA4:	/* read long */
-		if (addr & 0x03) {
-			return -EFAULT;
-		}
-		data = ctrl_inl(addr);
-		break;
-	default:
-		return -EFAULT;
-		break;
-	}
-
-	if ((cmd & 0x01) == 0) {	/* read */
-		if (copy_to_user((int *)arg, &data, sizeof(int))) {
-			return -EFAULT;
-		}
-	}
-	return 0;
-}
-
-static const struct file_operations gio_fops = {
-	.owner = THIS_MODULE,
-	.open = gio_open,	/* open */
-	.release = gio_close,	/* release */
-	.ioctl = gio_ioctl,	/* ioctl */
-};
-
-static int __init gio_init(void)
-{
-	int error;
-
-	printk(KERN_INFO "gio: driver initialized\n");
-
-	openCnt = 0;
-
-	if ((error = alloc_chrdev_region(&dev, 0, DEVCOUNT, "gio")) < 0) {
-		printk(KERN_ERR
-		       "gio: Couldn't alloc_chrdev_region, error=%d\n",
-		       error);
-		return 1;
-	}
-
-	cdev_p = cdev_alloc();
-	cdev_p->ops = &gio_fops;
-	error = cdev_add(cdev_p, dev, DEVCOUNT);
-	if (error) {
-		printk(KERN_ERR
-		       "gio: Couldn't cdev_add, error=%d\n", error);
-		return 1;
-	}
-
-	return 0;
-}
-
-static void __exit gio_exit(void)
-{
-	cdev_del(cdev_p);
-	unregister_chrdev_region(dev, DEVCOUNT);
-}
-
-module_init(gio_init);
-module_exit(gio_exit);
-
-MODULE_LICENSE("GPL");
diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/landisk/irq.c
deleted file mode 100644
index 258649491d44..000000000000
--- a/arch/sh/boards/landisk/irq.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/sh/boards/landisk/irq.c
- *
- * I-O DATA Device, Inc. LANDISK Support
- *
- * Copyright (C) 2005-2007 kogiidena
- *
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <asm/landisk/iodata_landisk.h>
-
-static void disable_landisk_irq(unsigned int irq)
-{
-	unsigned char mask = 0xff ^ (0x01 << (irq - 5));
-
-	ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK);
-}
-
-static void enable_landisk_irq(unsigned int irq)
-{
-	unsigned char value = (0x01 << (irq - 5));
-
-	ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK);
-}
-
-static struct irq_chip landisk_irq_chip __read_mostly = {
-	.name		= "LANDISK",
-	.mask		= disable_landisk_irq,
-	.unmask		= enable_landisk_irq,
-	.mask_ack	= disable_landisk_irq,
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_landisk_IRQ(void)
-{
-	int i;
-
-	for (i = 5; i < 14; i++) {
-		disable_irq_nosync(i);
-		set_irq_chip_and_handler_name(i, &landisk_irq_chip,
-					      handle_level_irq, "level");
-		enable_landisk_irq(i);
-	}
-	ctrl_outb(0x00, PA_PWRINT_CLR);
-}
diff --git a/arch/sh/boards/landisk/psw.c b/arch/sh/boards/landisk/psw.c
deleted file mode 100644
index 5a9b70b5decb..000000000000
--- a/arch/sh/boards/landisk/psw.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * arch/sh/boards/landisk/psw.c
- *
- * push switch support for LANDISK and USL-5P
- *
- * Copyright (C) 2006-2007  Paul Mundt
- * Copyright (C) 2007  kogiidena
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <asm/landisk/iodata_landisk.h>
-#include <asm/push-switch.h>
-
-static irqreturn_t psw_irq_handler(int irq, void *arg)
-{
-	struct platform_device *pdev = arg;
-	struct push_switch *psw = platform_get_drvdata(pdev);
-	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
-	unsigned int sw_value;
-	int ret = 0;
-
-	sw_value = (0x0ff & (~ctrl_inb(PA_STATUS)));
-
-	/* Nothing to do if there's no state change */
-	if (psw->state) {
-		ret = 1;
-		goto out;
-	}
-
-	/* Figure out who raised it */
-	if (sw_value & (1 << psw_info->bit)) {
-		psw->state = 1;
-		mod_timer(&psw->debounce, jiffies + 50);
-		ret = 1;
-	}
-
-out:
-	/* Clear the switch IRQs */
-	ctrl_outb(0x00, PA_PWRINT_CLR);
-
-	return IRQ_RETVAL(ret);
-}
-
-static struct resource psw_power_resources[] = {
-	[0] = {
-		.start = IRQ_POWER,
-		.flags = IORESOURCE_IRQ,
-       },
-};
-
-static struct resource psw_usl5p_resources[] = {
-	[0] = {
-		.start = IRQ_BUTTON,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct push_switch_platform_info psw_power_platform_data = {
-	.name		= "psw_power",
-	.bit		= 4,
-	.irq_flags	= IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw1_platform_data = {
-	.name		= "psw1",
-	.bit		= 0,
-	.irq_flags	= IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw2_platform_data = {
-	.name		= "psw2",
-	.bit		= 2,
-	.irq_flags	= IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct push_switch_platform_info psw3_platform_data = {
-	.name		= "psw3",
-	.bit		= 1,
-	.irq_flags	= IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct platform_device psw_power_switch_device = {
-	.name		= "push-switch",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(psw_power_resources),
-	.resource	= psw_power_resources,
-	.dev		= {
-		.platform_data = &psw_power_platform_data,
-	},
-};
-
-static struct platform_device psw1_switch_device = {
-	.name		= "push-switch",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
-	.resource	= psw_usl5p_resources,
-	.dev		= {
-		.platform_data = &psw1_platform_data,
-	},
-};
-
-static struct platform_device psw2_switch_device = {
-	.name		= "push-switch",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
-	.resource	= psw_usl5p_resources,
-	.dev		= {
-		.platform_data = &psw2_platform_data,
-	},
-};
-
-static struct platform_device psw3_switch_device = {
-	.name		= "push-switch",
-	.id		= 3,
-	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
-	.resource	= psw_usl5p_resources,
-	.dev = {
-		.platform_data = &psw3_platform_data,
-	},
-};
-
-static struct platform_device *psw_devices[] = {
-	&psw_power_switch_device,
-	&psw1_switch_device,
-	&psw2_switch_device,
-	&psw3_switch_device,
-};
-
-static int __init psw_init(void)
-{
-	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
-}
-module_init(psw_init);
diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/landisk/setup.c
deleted file mode 100644
index 2b708ec72558..000000000000
--- a/arch/sh/boards/landisk/setup.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * arch/sh/boards/landisk/setup.c
- *
- * I-O DATA Device, Inc. LANDISK Support.
- *
- * Copyright (C) 2000 Kazumoto Kojima
- * Copyright (C) 2002 Paul Mundt
- * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2005-2007 kogiidena
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/pm.h>
-#include <linux/mm.h>
-#include <asm/machvec.h>
-#include <asm/landisk/iodata_landisk.h>
-#include <asm/io.h>
-
-void init_landisk_IRQ(void);
-
-static void landisk_power_off(void)
-{
-        ctrl_outb(0x01, PA_SHUTDOWN);
-}
-
-static struct resource cf_ide_resources[3];
-
-static struct pata_platform_info pata_info = {
-	.ioport_shift	= 1,
-};
-
-static struct platform_device cf_ide_device = {
-	.name		= "pata_platform",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(cf_ide_resources),
-	.resource	= cf_ide_resources,
-	.dev		= {
-		.platform_data = &pata_info,
-	},
-};
-
-static struct platform_device rtc_device = {
-	.name		= "rs5c313",
-	.id		= -1,
-};
-
-static struct platform_device *landisk_devices[] __initdata = {
-	&cf_ide_device,
-	&rtc_device,
-};
-
-static int __init landisk_devices_setup(void)
-{
-	pgprot_t prot;
-	unsigned long paddrbase;
-	void *cf_ide_base;
-
-	/* open I/O area window */
-	paddrbase = virt_to_phys((void *)PA_AREA5_IO);
-	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
-	cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
-	if (!cf_ide_base) {
-		printk("allocate_cf_area : can't open CF I/O window!\n");
-		return -ENOMEM;
-	}
-
-	/* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
-	cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40;
-	cf_ide_resources[0].end   = (unsigned long)cf_ide_base + 0x40 + 0x0f;
-	cf_ide_resources[0].flags = IORESOURCE_IO;
-	cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c;
-	cf_ide_resources[1].end   = (unsigned long)cf_ide_base + 0x2c + 0x03;
-	cf_ide_resources[1].flags = IORESOURCE_IO;
-	cf_ide_resources[2].start = IRQ_FATA;
-	cf_ide_resources[2].flags = IORESOURCE_IRQ;
-
-	return platform_add_devices(landisk_devices,
-				    ARRAY_SIZE(landisk_devices));
-}
-
-__initcall(landisk_devices_setup);
-
-static void __init landisk_setup(char **cmdline_p)
-{
-        /* LED ON */
-	ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED);
-
-	printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
-	pm_power_off = landisk_power_off;
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_landisk __initmv = {
-	.mv_name = "LANDISK",
-	.mv_nr_irqs = 72,
-	.mv_setup = landisk_setup,
-	.mv_init_irq = init_landisk_IRQ,
-};
diff --git a/arch/sh/boards/cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile
index 489a8f867368..489a8f867368 100644
--- a/arch/sh/boards/cayman/Makefile
+++ b/arch/sh/boards/mach-cayman/Makefile
diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c
new file mode 100644
index 000000000000..ceb37ae92c70
--- /dev/null
+++ b/arch/sh/boards/mach-cayman/irq.c
@@ -0,0 +1,197 @@
+/*
+ * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support
+ *
+ * This file handles the board specific parts of the Cayman interrupt system
+ *
+ * Copyright (C) 2002 Stuart Menefy
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/signal.h>
+#include <cpu/irq.h>
+#include <asm/page.h>
+
+/* Setup for the SMSC FDC37C935 / LAN91C100FD */
+#define SMSC_IRQ         IRQ_IRL1
+
+/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */
+#define PCI2_IRQ         IRQ_IRL3
+
+unsigned long epld_virt;
+
+#define EPLD_BASE        0x04002000
+#define EPLD_STATUS_BASE (epld_virt + 0x10)
+#define EPLD_MASK_BASE   (epld_virt + 0x20)
+
+/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto
+   the same SH-5 interrupt */
+
+static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id)
+{
+        printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n");
+	return IRQ_NONE;
+}
+
+static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id)
+{
+        printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq);
+	return IRQ_NONE;
+}
+
+static struct irqaction cayman_action_smsc = {
+	.name		= "Cayman SMSC Mux",
+	.handler	= cayman_interrupt_smsc,
+	.flags		= IRQF_DISABLED,
+};
+
+static struct irqaction cayman_action_pci2 = {
+	.name		= "Cayman PCI2 Mux",
+	.handler	= cayman_interrupt_pci2,
+	.flags		= IRQF_DISABLED,
+};
+
+static void enable_cayman_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned long mask;
+	unsigned int reg;
+	unsigned char bit;
+
+	irq -= START_EXT_IRQS;
+	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+	bit = 1<<(irq % 8);
+	local_irq_save(flags);
+	mask = ctrl_inl(reg);
+	mask |= bit;
+	ctrl_outl(mask, reg);
+	local_irq_restore(flags);
+}
+
+void disable_cayman_irq(unsigned int irq)
+{
+	unsigned long flags;
+	unsigned long mask;
+	unsigned int reg;
+	unsigned char bit;
+
+	irq -= START_EXT_IRQS;
+	reg = EPLD_MASK_BASE + ((irq / 8) << 2);
+	bit = 1<<(irq % 8);
+	local_irq_save(flags);
+	mask = ctrl_inl(reg);
+	mask &= ~bit;
+	ctrl_outl(mask, reg);
+	local_irq_restore(flags);
+}
+
+static void ack_cayman_irq(unsigned int irq)
+{
+	disable_cayman_irq(irq);
+}
+
+static void end_cayman_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_cayman_irq(irq);
+}
+
+static unsigned int startup_cayman_irq(unsigned int irq)
+{
+	enable_cayman_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static void shutdown_cayman_irq(unsigned int irq)
+{
+	disable_cayman_irq(irq);
+}
+
+struct hw_interrupt_type cayman_irq_type = {
+	.typename	= "Cayman-IRQ",
+	.startup	= startup_cayman_irq,
+	.shutdown	= shutdown_cayman_irq,
+	.enable		= enable_cayman_irq,
+	.disable	= disable_cayman_irq,
+	.ack		= ack_cayman_irq,
+	.end		= end_cayman_irq,
+};
+
+int cayman_irq_demux(int evt)
+{
+	int irq = intc_evt_to_irq[evt];
+
+	if (irq == SMSC_IRQ) {
+		unsigned long status;
+		int i;
+
+		status = ctrl_inl(EPLD_STATUS_BASE) &
+			 ctrl_inl(EPLD_MASK_BASE) & 0xff;
+		if (status == 0) {
+			irq = -1;
+		} else {
+			for (i=0; i<8; i++) {
+				if (status & (1<<i))
+					break;
+			}
+			irq = START_EXT_IRQS + i;
+		}
+	}
+
+	if (irq == PCI2_IRQ) {
+		unsigned long status;
+		int i;
+
+		status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) &
+			 ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff;
+		if (status == 0) {
+			irq = -1;
+		} else {
+			for (i=0; i<8; i++) {
+				if (status & (1<<i))
+					break;
+			}
+			irq = START_EXT_IRQS + (3 * 8) + i;
+		}
+	}
+
+	return irq;
+}
+
+#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL)
+int cayman_irq_describe(char* p, int irq)
+{
+	if (irq < NR_INTC_IRQS) {
+		return intc_irq_describe(p, irq);
+	} else if (irq < NR_INTC_IRQS + 8) {
+		return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS);
+	} else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) {
+		return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24));
+	}
+
+	return 0;
+}
+#endif
+
+void init_cayman_irq(void)
+{
+	int i;
+
+	epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD");
+	if (!epld_virt) {
+		printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n");
+		return;
+	}
+
+	for (i=0; i<NR_EXT_IRQS; i++) {
+		irq_desc[START_EXT_IRQS + i].chip = &cayman_irq_type;
+	}
+
+	/* Setup the SMSC interrupt */
+	setup_irq(SMSC_IRQ, &cayman_action_smsc);
+	setup_irq(PCI2_IRQ, &cayman_action_pci2);
+}
diff --git a/arch/sh/boards/cayman/led.c b/arch/sh/boards/mach-cayman/led.c
index a808eac4ecd6..a808eac4ecd6 100644
--- a/arch/sh/boards/cayman/led.c
+++ b/arch/sh/boards/mach-cayman/led.c
diff --git a/arch/sh/boards/mach-cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c
new file mode 100644
index 000000000000..e7f9cc5f2ff1
--- /dev/null
+++ b/arch/sh/boards/mach-cayman/setup.c
@@ -0,0 +1,187 @@
+/*
+ * arch/sh/mach-cayman/setup.c
+ *
+ * SH5 Cayman support
+ *
+ * Copyright (C) 2002  David J. Mckay & Benedict Gaster
+ * Copyright (C) 2003 - 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <cpu/irq.h>
+
+/*
+ * Platform Dependent Interrupt Priorities.
+ */
+
+/* Using defaults defined in irq.h */
+#define	RES NO_PRIORITY		/* Disabled */
+#define IR0 IRL0_PRIORITY	/* IRLs */
+#define IR1 IRL1_PRIORITY
+#define IR2 IRL2_PRIORITY
+#define IR3 IRL3_PRIORITY
+#define PCA INTA_PRIORITY	/* PCI Ints */
+#define PCB INTB_PRIORITY
+#define PCC INTC_PRIORITY
+#define PCD INTD_PRIORITY
+#define SER TOP_PRIORITY
+#define ERR TOP_PRIORITY
+#define PW0 TOP_PRIORITY
+#define PW1 TOP_PRIORITY
+#define PW2 TOP_PRIORITY
+#define PW3 TOP_PRIORITY
+#define DM0 NO_PRIORITY		/* DMA Ints */
+#define DM1 NO_PRIORITY
+#define DM2 NO_PRIORITY
+#define DM3 NO_PRIORITY
+#define DAE NO_PRIORITY
+#define TU0 TIMER_PRIORITY	/* TMU Ints */
+#define TU1 NO_PRIORITY
+#define TU2 NO_PRIORITY
+#define TI2 NO_PRIORITY
+#define ATI NO_PRIORITY		/* RTC Ints */
+#define PRI NO_PRIORITY
+#define CUI RTC_PRIORITY
+#define ERI SCIF_PRIORITY	/* SCIF Ints */
+#define RXI SCIF_PRIORITY
+#define BRI SCIF_PRIORITY
+#define TXI SCIF_PRIORITY
+#define ITI TOP_PRIORITY	/* WDT Ints */
+
+/* Setup for the SMSC FDC37C935 */
+#define SMSC_SUPERIO_BASE	0x04000000
+#define SMSC_CONFIG_PORT_ADDR	0x3f0
+#define SMSC_INDEX_PORT_ADDR	SMSC_CONFIG_PORT_ADDR
+#define SMSC_DATA_PORT_ADDR	0x3f1
+
+#define SMSC_ENTER_CONFIG_KEY	0x55
+#define SMSC_EXIT_CONFIG_KEY	0xaa
+
+#define SMCS_LOGICAL_DEV_INDEX	0x07
+#define SMSC_DEVICE_ID_INDEX	0x20
+#define SMSC_DEVICE_REV_INDEX	0x21
+#define SMSC_ACTIVATE_INDEX	0x30
+#define SMSC_PRIMARY_BASE_INDEX  0x60
+#define SMSC_SECONDARY_BASE_INDEX 0x62
+#define SMSC_PRIMARY_INT_INDEX	0x70
+#define SMSC_SECONDARY_INT_INDEX 0x72
+
+#define SMSC_IDE1_DEVICE	1
+#define SMSC_KEYBOARD_DEVICE	7
+#define SMSC_CONFIG_REGISTERS	8
+
+#define SMSC_SUPERIO_READ_INDEXED(index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	inb(SMSC_DATA_PORT_ADDR); })
+#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \
+	outb((index), SMSC_INDEX_PORT_ADDR); \
+	outb((val),   SMSC_DATA_PORT_ADDR); })
+
+#define IDE1_PRIMARY_BASE	0x01f0
+#define IDE1_SECONDARY_BASE	0x03f6
+
+unsigned long smsc_superio_virt;
+
+int platform_int_priority[NR_INTC_IRQS] = {
+	IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD,	/* IRQ  0- 7 */
+	RES, RES, RES, RES, SER, ERR, PW3, PW2,	/* IRQ  8-15 */
+	PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES,	/* IRQ 16-23 */
+	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 24-31 */
+	TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI,	/* IRQ 32-39 */
+	RXI, BRI, TXI, RES, RES, RES, RES, RES,	/* IRQ 40-47 */
+	RES, RES, RES, RES, RES, RES, RES, RES,	/* IRQ 48-55 */
+	RES, RES, RES, RES, RES, RES, RES, ITI,	/* IRQ 56-63 */
+};
+
+static int __init smsc_superio_setup(void)
+{
+	unsigned char devid, devrev;
+
+	smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO");
+	if (!smsc_superio_virt) {
+		panic("Unable to remap SMSC SuperIO\n");
+	}
+
+	/* Initially the chip is in run state */
+	/* Put it into configuration state */
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+	outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	/* Read device ID info */
+	devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
+	devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
+	printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev);
+
+	/* Select the keyboard device */
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+
+	/* enable it */
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+	/* Select the interrupts */
+	/* On a PC keyboard is IRQ1, mouse is IRQ12 */
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX);
+	SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX);
+
+#ifdef CONFIG_IDE
+	/*
+	 * Only IDE1 exists on the Cayman
+	 */
+
+	/* Power it on */
+	SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22);
+
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
+	SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8,
+				   SMSC_PRIMARY_BASE_INDEX + 0);
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff,
+				   SMSC_PRIMARY_BASE_INDEX + 1);
+
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8,
+				   SMSC_SECONDARY_BASE_INDEX + 0);
+	SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff,
+				   SMSC_SECONDARY_BASE_INDEX + 1);
+
+	SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS,
+				   SMCS_LOGICAL_DEV_INDEX);
+
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
+	SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
+	SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
+#endif
+
+	/* Exit the configuration state */
+	outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
+
+	return 0;
+}
+__initcall(smsc_superio_setup);
+
+static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len)
+{
+	if (port < 0x400) {
+		extern unsigned long smsc_superio_virt;
+		return (void __iomem *)((port << 2) | smsc_superio_virt);
+	}
+
+	return (void __iomem *)port;
+}
+
+extern void init_cayman_irq(void);
+
+static struct sh_machine_vector mv_cayman __initmv = {
+	.mv_name		= "Hitachi Cayman",
+	.mv_nr_irqs		= 64,
+	.mv_ioport_map		= cayman_ioport_map,
+	.mv_init_irq		= init_cayman_irq,
+};
diff --git a/arch/sh/boards/dreamcast/Makefile b/arch/sh/boards/mach-dreamcast/Makefile
index 7b97546c7e5f..7b97546c7e5f 100644
--- a/arch/sh/boards/dreamcast/Makefile
+++ b/arch/sh/boards/mach-dreamcast/Makefile
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
new file mode 100644
index 000000000000..67bdc33dd411
--- /dev/null
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -0,0 +1,153 @@
+/*
+ * arch/sh/boards/dreamcast/irq.c
+ *
+ * Holly IRQ support for the Sega Dreamcast.
+ *
+ * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
+ *
+ * This file is part of the LinuxDC project (www.linuxdc.org)
+ * Released under the terms of the GNU GPL v2.0
+ */
+
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <mach/sysasic.h>
+
+/* Dreamcast System ASIC Hardware Events -
+
+   The Dreamcast's System ASIC (a.k.a. Holly) is responsible for receiving
+   hardware events from system peripherals and triggering an SH7750 IRQ.
+   Hardware events can trigger IRQs 13, 11, or 9 depending on which bits are
+   set in the Event Mask Registers (EMRs).  When a hardware event is
+   triggered, it's corresponding bit in the Event Status Registers (ESRs)
+   is set, and that bit should be rewritten to the ESR to acknowledge that
+   event.
+
+   There are three 32-bit ESRs located at 0xa05f8900 - 0xa05f6908.  Event
+   types can be found in include/asm-sh/dreamcast/sysasic.h. There are three
+   groups of EMRs that parallel the ESRs.  Each EMR group corresponds to an
+   IRQ, so 0xa05f6910 - 0xa05f6918 triggers IRQ 13, 0xa05f6920 - 0xa05f6928
+   triggers IRQ 11, and 0xa05f6930 - 0xa05f6938 triggers IRQ 9.
+
+   In the kernel, these events are mapped to virtual IRQs so that drivers can
+   respond to them as they would a normal interrupt.  In order to keep this
+   mapping simple, the events are mapped as:
+
+   6900/6910 - Events  0-31, IRQ 13
+   6904/6924 - Events 32-63, IRQ 11
+   6908/6938 - Events 64-95, IRQ  9
+
+*/
+
+#define ESR_BASE 0x005f6900    /* Base event status register */
+#define EMR_BASE 0x005f6910    /* Base event mask register */
+
+/* Helps us determine the EMR group that this event belongs to: 0 = 0x6910,
+   1 = 0x6920, 2 = 0x6930; also determine the event offset */
+#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
+
+/* Return the hardware event's bit positon within the EMR/ESR */
+#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
+
+/* For each of these *_irq routines, the IRQ passed in is the virtual IRQ
+   (logically mapped to the corresponding bit for the hardware event). */
+
+/* Disable the hardware event by masking its bit in its EMR */
+static inline void disable_systemasic_irq(unsigned int irq)
+{
+        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+        __u32 mask;
+
+        mask = inl(emr);
+        mask &= ~(1 << EVENT_BIT(irq));
+        outl(mask, emr);
+}
+
+/* Enable the hardware event by setting its bit in its EMR */
+static inline void enable_systemasic_irq(unsigned int irq)
+{
+        __u32 emr = EMR_BASE + (LEVEL(irq) << 4) + (LEVEL(irq) << 2);
+        __u32 mask;
+
+        mask = inl(emr);
+        mask |= (1 << EVENT_BIT(irq));
+        outl(mask, emr);
+}
+
+/* Acknowledge a hardware event by writing its bit back to its ESR */
+static void ack_systemasic_irq(unsigned int irq)
+{
+        __u32 esr = ESR_BASE + (LEVEL(irq) << 2);
+        disable_systemasic_irq(irq);
+        outl((1 << EVENT_BIT(irq)), esr);
+}
+
+/* After a IRQ has been ack'd and responded to, it needs to be renabled */
+static void end_systemasic_irq(unsigned int irq)
+{
+        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+                enable_systemasic_irq(irq);
+}
+
+static unsigned int startup_systemasic_irq(unsigned int irq)
+{
+        enable_systemasic_irq(irq);
+
+        return 0;
+}
+
+static void shutdown_systemasic_irq(unsigned int irq)
+{
+        disable_systemasic_irq(irq);
+}
+
+struct hw_interrupt_type systemasic_int = {
+        .typename       = "System ASIC",
+        .startup        = startup_systemasic_irq,
+        .shutdown       = shutdown_systemasic_irq,
+        .enable         = enable_systemasic_irq,
+        .disable        = disable_systemasic_irq,
+        .ack            = ack_systemasic_irq,
+        .end            = end_systemasic_irq,
+};
+
+/*
+ * Map the hardware event indicated by the processor IRQ to a virtual IRQ.
+ */
+int systemasic_irq_demux(int irq)
+{
+        __u32 emr, esr, status, level;
+        __u32 j, bit;
+
+        switch (irq) {
+                case 13:
+                        level = 0;
+                        break;
+                case 11:
+                        level = 1;
+                        break;
+                case  9:
+                        level = 2;
+                        break;
+                default:
+                        return irq;
+        }
+        emr = EMR_BASE + (level << 4) + (level << 2);
+        esr = ESR_BASE + (level << 2);
+
+        /* Mask the ESR to filter any spurious, unwanted interrupts */
+        status = inl(esr);
+        status &= inl(emr);
+
+        /* Now scan and find the first set bit as the event to map */
+        for (bit = 1, j = 0; j < 32; bit <<= 1, j++) {
+                if (status & bit) {
+                        irq = HW_EVENT_IRQ_BASE + j + (level << 5);
+                        return irq;
+                }
+        }
+
+        /* Not reached */
+        return irq;
+}
diff --git a/arch/sh/boards/mach-dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c
new file mode 100644
index 000000000000..a7433685798d
--- /dev/null
+++ b/arch/sh/boards/mach-dreamcast/rtc.c
@@ -0,0 +1,81 @@
+/*
+ * arch/sh/boards/dreamcast/rtc.c
+ *
+ * Dreamcast AICA RTC routines.
+ *
+ * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@0xd6.org>
+ * Copyright (c) 2002 Paul Mundt <lethal@chaoticdreams.org>
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ */
+
+#include <linux/time.h>
+#include <asm/rtc.h>
+#include <asm/io.h>
+
+/* The AICA RTC has an Epoch of 1/1/1950, so we must subtract 20 years (in
+   seconds) to get the standard Unix Epoch when getting the time, and add
+   20 years when setting the time. */
+#define TWENTY_YEARS ((20 * 365LU + 5) * 86400)
+
+/* The AICA RTC is represented by a 32-bit seconds counter stored in 2 16-bit
+   registers.*/
+#define AICA_RTC_SECS_H		0xa0710000
+#define AICA_RTC_SECS_L		0xa0710004
+
+/**
+ * aica_rtc_gettimeofday - Get the time from the AICA RTC
+ * @ts: pointer to resulting timespec
+ *
+ * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch.
+ */
+static void aica_rtc_gettimeofday(struct timespec *ts)
+{
+	unsigned long val1, val2;
+
+	do {
+		val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+
+		val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+	} while (val1 != val2);
+
+	ts->tv_sec = val1 - TWENTY_YEARS;
+
+	/* Can't get nanoseconds with just a seconds counter. */
+	ts->tv_nsec = 0;
+}
+
+/**
+ * aica_rtc_settimeofday - Set the AICA RTC to the current time
+ * @secs: contains the time_t to set
+ *
+ * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter.
+ */
+static int aica_rtc_settimeofday(const time_t secs)
+{
+	unsigned long val1, val2;
+	unsigned long adj = secs + TWENTY_YEARS;
+
+	do {
+		ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H);
+		ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L);
+
+		val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+
+		val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) |
+			(ctrl_inl(AICA_RTC_SECS_L) & 0xffff);
+	} while (val1 != val2);
+
+	return 0;
+}
+
+void aica_time_init(void)
+{
+	rtc_sh_get_time = aica_rtc_gettimeofday;
+	rtc_sh_set_time = aica_rtc_settimeofday;
+}
+
diff --git a/arch/sh/boards/mach-dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c
new file mode 100644
index 000000000000..7d944fc75e93
--- /dev/null
+++ b/arch/sh/boards/mach-dreamcast/setup.c
@@ -0,0 +1,64 @@
+/*
+ * arch/sh/boards/dreamcast/setup.c
+ *
+ * Hardware support for the Sega Dreamcast.
+ *
+ * Copyright (c) 2001, 2002 M. R. Brown <mrbrown@linuxdc.org>
+ * Copyright (c) 2002, 2003, 2004 Paul Mundt <lethal@linux-sh.org>
+ *
+ * This file is part of the LinuxDC project (www.linuxdc.org)
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ * This file originally bore the message (with enclosed-$):
+ *	Id: setup_dc.c,v 1.5 2001/05/24 05:09:16 mrbrown Exp
+ *	SEGA Dreamcast support
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/device.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/rtc.h>
+#include <asm/machvec.h>
+#include <mach/sysasic.h>
+
+extern struct hw_interrupt_type systemasic_int;
+extern void aica_time_init(void);
+extern int gapspci_init(void);
+extern int systemasic_irq_demux(int);
+
+static void __init dreamcast_setup(char **cmdline_p)
+{
+	int i;
+
+	/* Mask all hardware events */
+	/* XXX */
+
+	/* Acknowledge any previous events */
+	/* XXX */
+
+	__set_io_port_base(0xa0000000);
+
+	/* Assign all virtual IRQs to the System ASIC int. handler */
+	for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
+		irq_desc[i].chip = &systemasic_int;
+
+	board_time_init = aica_time_init;
+
+#ifdef CONFIG_PCI
+	if (gapspci_init() < 0)
+		printk(KERN_WARNING "GAPSPCI was not detected.\n");
+#endif
+}
+
+static struct sh_machine_vector mv_dreamcast __initmv = {
+	.mv_name		= "Sega Dreamcast",
+	.mv_setup		= dreamcast_setup,
+	.mv_irq_demux		= systemasic_irq_demux,
+};
diff --git a/arch/sh/boards/renesas/edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile
index 14bdd531f116..14bdd531f116 100644
--- a/arch/sh/boards/renesas/edosk7705/Makefile
+++ b/arch/sh/boards/mach-edosk7705/Makefile
diff --git a/arch/sh/boards/renesas/edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c
index 541cea2a652f..541cea2a652f 100644
--- a/arch/sh/boards/renesas/edosk7705/io.c
+++ b/arch/sh/boards/mach-edosk7705/io.c
diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c
index f076c45308dd..f076c45308dd 100644
--- a/arch/sh/boards/renesas/edosk7705/setup.c
+++ b/arch/sh/boards/mach-edosk7705/setup.c
diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/mach-highlander/Kconfig
index fc8f28e04ba3..fc8f28e04ba3 100644
--- a/arch/sh/boards/renesas/r7780rp/Kconfig
+++ b/arch/sh/boards/mach-highlander/Kconfig
diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/mach-highlander/Makefile
index 20a10080b11f..20a10080b11f 100644
--- a/arch/sh/boards/renesas/r7780rp/Makefile
+++ b/arch/sh/boards/mach-highlander/Makefile
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c
index ae1cfcb29700..ae1cfcb29700 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780mp.c
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c
index 9d3921fe27c0..9d3921fe27c0 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7780rp.c
diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c
index 896c045aa39d..896c045aa39d 100644
--- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c
+++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c
diff --git a/arch/sh/boards/mach-highlander/psw.c b/arch/sh/boards/mach-highlander/psw.c
new file mode 100644
index 000000000000..be8d5477fc65
--- /dev/null
+++ b/arch/sh/boards/mach-highlander/psw.c
@@ -0,0 +1,122 @@
+/*
+ * arch/sh/boards/renesas/r7780rp/psw.c
+ *
+ * push switch support for RDBRP-1/RDBREVRP-1 debug boards.
+ *
+ * Copyright (C) 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <asm/r7780rp.h>
+#include <asm/push-switch.h>
+
+static irqreturn_t psw_irq_handler(int irq, void *arg)
+{
+	struct platform_device *pdev = arg;
+	struct push_switch *psw = platform_get_drvdata(pdev);
+	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
+	unsigned int l, mask;
+	int ret = 0;
+
+	l = ctrl_inw(PA_DBSW);
+
+	/* Nothing to do if there's no state change */
+	if (psw->state) {
+		ret = 1;
+		goto out;
+	}
+
+	mask = l & 0x70;
+	/* Figure out who raised it */
+	if (mask & (1 << psw_info->bit)) {
+		psw->state = !!(mask & (1 << psw_info->bit));
+		if (psw->state)	/* debounce */
+			mod_timer(&psw->debounce, jiffies + 50);
+
+		ret = 1;
+	}
+
+out:
+	/* Clear the switch IRQs */
+	l |= (0x7 << 12);
+	ctrl_outw(l, PA_DBSW);
+
+	return IRQ_RETVAL(ret);
+}
+
+static struct resource psw_resources[] = {
+	[0] = {
+		.start	= IRQ_PSW,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct push_switch_platform_info s2_platform_data = {
+	.name		= "s2",
+	.bit		= 6,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s2_switch_device = {
+	.name		= "push-switch",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s2_platform_data,
+	},
+};
+
+static struct push_switch_platform_info s3_platform_data = {
+	.name		= "s3",
+	.bit		= 5,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s3_switch_device = {
+	.name		= "push-switch",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s3_platform_data,
+	},
+};
+
+static struct push_switch_platform_info s4_platform_data = {
+	.name		= "s4",
+	.bit		= 4,
+	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
+			  IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device s4_switch_device = {
+	.name		= "push-switch",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(psw_resources),
+	.resource	= psw_resources,
+	.dev		= {
+		.platform_data = &s4_platform_data,
+	},
+};
+
+static struct platform_device *psw_devices[] = {
+	&s2_switch_device, &s3_switch_device, &s4_switch_device,
+};
+
+static int __init psw_init(void)
+{
+	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
+}
+module_init(psw_init);
diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/mach-highlander/setup.c
index bc79afb6fc4c..bc79afb6fc4c 100644
--- a/arch/sh/boards/renesas/r7780rp/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/mach-hp6xx/Makefile
index b3124278247c..b3124278247c 100644
--- a/arch/sh/boards/hp6xx/Makefile
+++ b/arch/sh/boards/mach-hp6xx/Makefile
diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
index 177f4f028e0d..177f4f028e0d 100644
--- a/arch/sh/boards/hp6xx/hp6xx_apm.c
+++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c
diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c
new file mode 100644
index 000000000000..e96684def788
--- /dev/null
+++ b/arch/sh/boards/mach-hp6xx/pm.c
@@ -0,0 +1,81 @@
+/*
+ * hp6x0 Power Management Routines
+ *
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License.
+ */
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <asm/io.h>
+#include <asm/hd64461.h>
+#include <asm/hp6xx.h>
+#include <cpu/dac.h>
+#include <asm/pm.h>
+
+#define STBCR		0xffffff82
+#define STBCR2		0xffffff88
+
+static int hp6x0_pm_enter(suspend_state_t state)
+{
+	u8 stbcr, stbcr2;
+#ifdef CONFIG_HD64461_ENABLER
+	u8 scr;
+	u16 hd64461_stbcr;
+#endif
+
+#ifdef CONFIG_HD64461_ENABLER
+	outb(0, HD64461_PCC1CSCIER);
+
+	scr = inb(HD64461_PCC1SCR);
+	scr |= HD64461_PCCSCR_VCC1;
+	outb(scr, HD64461_PCC1SCR);
+
+	hd64461_stbcr = inw(HD64461_STBCR);
+	hd64461_stbcr |= HD64461_STBCR_SPC1ST;
+	outw(hd64461_stbcr, HD64461_STBCR);
+#endif
+
+	ctrl_outb(0x1f, DACR);
+
+	stbcr = ctrl_inb(STBCR);
+	ctrl_outb(0x01, STBCR);
+
+	stbcr2 = ctrl_inb(STBCR2);
+	ctrl_outb(0x7f , STBCR2);
+
+	outw(0xf07f, HD64461_SCPUCR);
+
+	pm_enter();
+
+	outw(0, HD64461_SCPUCR);
+	ctrl_outb(stbcr, STBCR);
+	ctrl_outb(stbcr2, STBCR2);
+
+#ifdef CONFIG_HD64461_ENABLER
+	hd64461_stbcr = inw(HD64461_STBCR);
+	hd64461_stbcr &= ~HD64461_STBCR_SPC1ST;
+	outw(hd64461_stbcr, HD64461_STBCR);
+
+	outb(0x4c, HD64461_PCC1CSCIER);
+	outb(0x00, HD64461_PCC1CSCR);
+#endif
+
+	return 0;
+}
+
+static struct platform_suspend_ops hp6x0_pm_ops = {
+	.enter		= hp6x0_pm_enter,
+	.valid		= suspend_valid_only_mem,
+};
+
+static int __init hp6x0_pm_init(void)
+{
+	suspend_set_ops(&hp6x0_pm_ops);
+	return 0;
+}
+
+late_initcall(hp6x0_pm_init);
diff --git a/arch/sh/boards/mach-hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
new file mode 100644
index 000000000000..44b648cf6f23
--- /dev/null
+++ b/arch/sh/boards/mach-hp6xx/pm_wakeup.S
@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2006 Andriy Skulysh <askulsyh@gmail.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <cpu/mmu_context.h>
+
+#define k0	r0
+#define k1	r1
+#define k2	r2
+#define k3	r3
+#define k4	r4
+
+/*
+ * Kernel mode register usage:
+ *	k0	scratch
+ *	k1	scratch
+ *	k2	scratch (Exception code)
+ *	k3	scratch (Return address)
+ *	k4	scratch
+ *	k5	reserved
+ *	k6	Global Interrupt Mask (0--15 << 4)
+ *	k7	CURRENT_THREAD_INFO (pointer to current thread info)
+ */
+
+ENTRY(wakeup_start)
+! clear STBY bit
+	mov	#-126, k2
+   	and	#127, k0
+	mov.b	k0, @k2
+! enable refresh
+	mov.l	5f, k1
+	mov.w	6f, k0
+  	mov.w	k0, @k1
+! jump to handler
+	mov.l	2f, k2
+	mov.l	3f, k3
+	mov.l	@k2, k2
+
+	mov.l	4f, k1
+	jmp	@k1
+	nop
+
+	.align	2
+1:	.long	EXPEVT
+2:	.long	INTEVT
+3:	.long	ret_from_irq
+4:	.long	handle_exception
+5:	.long	0xffffff68
+6:	.word	0x0524
+
+ENTRY(wakeup_end)
+	nop
diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c
new file mode 100644
index 000000000000..475b46caec1f
--- /dev/null
+++ b/arch/sh/boards/mach-hp6xx/setup.c
@@ -0,0 +1,121 @@
+/*
+ * linux/arch/sh/boards/hp6xx/setup.c
+ *
+ * Copyright (C) 2002 Andriy Skulysh
+ * Copyright (C) 2007 Kristoffer Ericson <Kristoffer_e1@hotmail.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Setup code for HP620/HP660/HP680/HP690 (internal peripherials only)
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/hd64461.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hp6xx.h>
+#include <cpu/dac.h>
+
+#define	SCPCR	0xa4000116
+#define	SCPDR	0xa4000136
+
+/* CF Slot */
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start = 0x15000000 + 0x1f0,
+		.end   = 0x15000000 + 0x1f0 + 0x08 - 0x01,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 0x15000000 + 0x1fe,
+		.end   = 0x15000000 + 0x1fe + 0x01,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = 77,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		=  "pata_platform",
+	.id		=  -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
+static struct platform_device jornadakbd_device = {
+	.name		= "jornada680_kbd",
+	.id		= -1,
+};
+
+static struct platform_device *hp6xx_devices[] __initdata = {
+	&cf_ide_device,
+	&jornadakbd_device,
+};
+
+static void __init hp6xx_init_irq(void)
+{
+	/* Gets touchscreen and powerbutton IRQ working */
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+static int __init hp6xx_devices_setup(void)
+{
+	return platform_add_devices(hp6xx_devices, ARRAY_SIZE(hp6xx_devices));
+}
+
+static void __init hp6xx_setup(char **cmdline_p)
+{
+	u8 v8;
+	u16 v;
+
+	v = inw(HD64461_STBCR);
+	v |=	HD64461_STBCR_SURTST | HD64461_STBCR_SIRST	|
+		HD64461_STBCR_STM1ST | HD64461_STBCR_STM0ST	|
+		HD64461_STBCR_SAFEST | HD64461_STBCR_SPC0ST	|
+		HD64461_STBCR_SMIAST | HD64461_STBCR_SAFECKE_OST|
+		HD64461_STBCR_SAFECKE_IST;
+#ifndef CONFIG_HD64461_ENABLER
+	v |= HD64461_STBCR_SPC1ST;
+#endif
+	outw(v, HD64461_STBCR);
+	v = inw(HD64461_GPADR);
+	v |= HD64461_GPADR_SPEAKER | HD64461_GPADR_PCMCIA0;
+	outw(v, HD64461_GPADR);
+
+	outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC0GCR);
+
+#ifndef CONFIG_HD64461_ENABLER
+	outw(HD64461_PCCGCR_VCC0 | HD64461_PCCSCR_VCC1, HD64461_PCC1GCR);
+#endif
+
+	sh_dac_output(0, DAC_SPEAKER_VOLUME);
+	sh_dac_disable(DAC_SPEAKER_VOLUME);
+	v8 = ctrl_inb(DACR);
+	v8 &= ~DACR_DAE;
+	ctrl_outb(v8,DACR);
+
+	v8 = ctrl_inb(SCPDR);
+	v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y;
+	v8 &= ~SCPDR_TS_SCAN_ENABLE;
+	ctrl_outb(v8, SCPDR);
+
+	v = ctrl_inw(SCPCR);
+	v &= ~SCPCR_TS_MASK;
+	v |= SCPCR_TS_ENABLE;
+	ctrl_outw(v, SCPCR);
+}
+device_initcall(hp6xx_devices_setup);
+
+static struct sh_machine_vector mv_hp6xx __initmv = {
+	.mv_name = "hp6xx",
+	.mv_setup = hp6xx_setup,
+	/* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */
+	.mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6,
+	.mv_irq_demux = hd64461_irq_demux,
+	/* Enable IRQ0 -> IRQ3 in IRQ_MODE */
+	.mv_init_irq = hp6xx_init_irq,
+};
diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/mach-landisk/Makefile
index a696b4277fa9..a696b4277fa9 100644
--- a/arch/sh/boards/landisk/Makefile
+++ b/arch/sh/boards/mach-landisk/Makefile
diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c
new file mode 100644
index 000000000000..25cdf7358000
--- /dev/null
+++ b/arch/sh/boards/mach-landisk/gio.c
@@ -0,0 +1,171 @@
+/*
+ * arch/sh/boards/landisk/gio.c - driver for landisk
+ *
+ * This driver will also support the I-O DATA Device, Inc. LANDISK Board.
+ * LANDISK and USL-5P Button, LED and GIO driver drive function.
+ *
+ *   Copylight (C) 2006 kogiidena
+ *   Copylight (C) 2002 Atom Create Engineering Co., Ltd. *
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/smp_lock.h>
+#include <linux/kdev_t.h>
+#include <linux/cdev.h>
+#include <linux/fs.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <mach-landisk/mach/gio.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+
+#define DEVCOUNT                4
+#define GIO_MINOR	        2	/* GIO minor no. */
+
+static dev_t dev;
+static struct cdev *cdev_p;
+static int openCnt;
+
+static int gio_open(struct inode *inode, struct file *filp)
+{
+	int minor;
+	int ret = -ENOENT;
+
+	lock_kernel();
+	minor = MINOR(inode->i_rdev);
+	if (minor < DEVCOUNT) {
+		if (openCnt > 0) {
+			ret = -EALREADY;
+		} else {
+			openCnt++;
+			ret = 0;
+		}
+	}
+	unlock_kernel();
+	return ret;
+}
+
+static int gio_close(struct inode *inode, struct file *filp)
+{
+	int minor;
+
+	minor = MINOR(inode->i_rdev);
+	if (minor < DEVCOUNT) {
+		openCnt--;
+	}
+	return 0;
+}
+
+static int gio_ioctl(struct inode *inode, struct file *filp,
+			     unsigned int cmd, unsigned long arg)
+{
+	unsigned int data;
+	static unsigned int addr = 0;
+
+	if (cmd & 0x01) {	/* write */
+		if (copy_from_user(&data, (int *)arg, sizeof(int))) {
+			return -EFAULT;
+		}
+	}
+
+	switch (cmd) {
+	case GIODRV_IOCSGIOSETADDR:	/* address set */
+		addr = data;
+		break;
+
+	case GIODRV_IOCSGIODATA1:	/* write byte */
+		ctrl_outb((unsigned char)(0x0ff & data), addr);
+		break;
+
+	case GIODRV_IOCSGIODATA2:	/* write word */
+		if (addr & 0x01) {
+			return -EFAULT;
+		}
+		ctrl_outw((unsigned short int)(0x0ffff & data), addr);
+		break;
+
+	case GIODRV_IOCSGIODATA4:	/* write long */
+		if (addr & 0x03) {
+			return -EFAULT;
+		}
+		ctrl_outl(data, addr);
+		break;
+
+	case GIODRV_IOCGGIODATA1:	/* read byte */
+		data = ctrl_inb(addr);
+		break;
+
+	case GIODRV_IOCGGIODATA2:	/* read word */
+		if (addr & 0x01) {
+			return -EFAULT;
+		}
+		data = ctrl_inw(addr);
+		break;
+
+	case GIODRV_IOCGGIODATA4:	/* read long */
+		if (addr & 0x03) {
+			return -EFAULT;
+		}
+		data = ctrl_inl(addr);
+		break;
+	default:
+		return -EFAULT;
+		break;
+	}
+
+	if ((cmd & 0x01) == 0) {	/* read */
+		if (copy_to_user((int *)arg, &data, sizeof(int))) {
+			return -EFAULT;
+		}
+	}
+	return 0;
+}
+
+static const struct file_operations gio_fops = {
+	.owner = THIS_MODULE,
+	.open = gio_open,	/* open */
+	.release = gio_close,	/* release */
+	.ioctl = gio_ioctl,	/* ioctl */
+};
+
+static int __init gio_init(void)
+{
+	int error;
+
+	printk(KERN_INFO "gio: driver initialized\n");
+
+	openCnt = 0;
+
+	if ((error = alloc_chrdev_region(&dev, 0, DEVCOUNT, "gio")) < 0) {
+		printk(KERN_ERR
+		       "gio: Couldn't alloc_chrdev_region, error=%d\n",
+		       error);
+		return 1;
+	}
+
+	cdev_p = cdev_alloc();
+	cdev_p->ops = &gio_fops;
+	error = cdev_add(cdev_p, dev, DEVCOUNT);
+	if (error) {
+		printk(KERN_ERR
+		       "gio: Couldn't cdev_add, error=%d\n", error);
+		return 1;
+	}
+
+	return 0;
+}
+
+static void __exit gio_exit(void)
+{
+	cdev_del(cdev_p);
+	unregister_chrdev_region(dev, DEVCOUNT);
+}
+
+module_init(gio_init);
+module_exit(gio_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c
new file mode 100644
index 000000000000..7b284cde1f58
--- /dev/null
+++ b/arch/sh/boards/mach-landisk/irq.c
@@ -0,0 +1,56 @@
+/*
+ * arch/sh/boards/landisk/irq.c
+ *
+ * I-O DATA Device, Inc. LANDISK Support
+ *
+ * Copyright (C) 2005-2007 kogiidena
+ *
+ * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+
+static void disable_landisk_irq(unsigned int irq)
+{
+	unsigned char mask = 0xff ^ (0x01 << (irq - 5));
+
+	ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK);
+}
+
+static void enable_landisk_irq(unsigned int irq)
+{
+	unsigned char value = (0x01 << (irq - 5));
+
+	ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK);
+}
+
+static struct irq_chip landisk_irq_chip __read_mostly = {
+	.name		= "LANDISK",
+	.mask		= disable_landisk_irq,
+	.unmask		= enable_landisk_irq,
+	.mask_ack	= disable_landisk_irq,
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_landisk_IRQ(void)
+{
+	int i;
+
+	for (i = 5; i < 14; i++) {
+		disable_irq_nosync(i);
+		set_irq_chip_and_handler_name(i, &landisk_irq_chip,
+					      handle_level_irq, "level");
+		enable_landisk_irq(i);
+	}
+	ctrl_outb(0x00, PA_PWRINT_CLR);
+}
diff --git a/arch/sh/boards/mach-landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c
new file mode 100644
index 000000000000..e6b0efa098d1
--- /dev/null
+++ b/arch/sh/boards/mach-landisk/psw.c
@@ -0,0 +1,143 @@
+/*
+ * arch/sh/boards/landisk/psw.c
+ *
+ * push switch support for LANDISK and USL-5P
+ *
+ * Copyright (C) 2006-2007  Paul Mundt
+ * Copyright (C) 2007  kogiidena
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+#include <asm/push-switch.h>
+
+static irqreturn_t psw_irq_handler(int irq, void *arg)
+{
+	struct platform_device *pdev = arg;
+	struct push_switch *psw = platform_get_drvdata(pdev);
+	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
+	unsigned int sw_value;
+	int ret = 0;
+
+	sw_value = (0x0ff & (~ctrl_inb(PA_STATUS)));
+
+	/* Nothing to do if there's no state change */
+	if (psw->state) {
+		ret = 1;
+		goto out;
+	}
+
+	/* Figure out who raised it */
+	if (sw_value & (1 << psw_info->bit)) {
+		psw->state = 1;
+		mod_timer(&psw->debounce, jiffies + 50);
+		ret = 1;
+	}
+
+out:
+	/* Clear the switch IRQs */
+	ctrl_outb(0x00, PA_PWRINT_CLR);
+
+	return IRQ_RETVAL(ret);
+}
+
+static struct resource psw_power_resources[] = {
+	[0] = {
+		.start = IRQ_POWER,
+		.flags = IORESOURCE_IRQ,
+       },
+};
+
+static struct resource psw_usl5p_resources[] = {
+	[0] = {
+		.start = IRQ_BUTTON,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct push_switch_platform_info psw_power_platform_data = {
+	.name		= "psw_power",
+	.bit		= 4,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw1_platform_data = {
+	.name		= "psw1",
+	.bit		= 0,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw2_platform_data = {
+	.name		= "psw2",
+	.bit		= 2,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct push_switch_platform_info psw3_platform_data = {
+	.name		= "psw3",
+	.bit		= 1,
+	.irq_flags	= IRQF_SHARED,
+	.irq_handler	= psw_irq_handler,
+};
+
+static struct platform_device psw_power_switch_device = {
+	.name		= "push-switch",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(psw_power_resources),
+	.resource	= psw_power_resources,
+	.dev		= {
+		.platform_data = &psw_power_platform_data,
+	},
+};
+
+static struct platform_device psw1_switch_device = {
+	.name		= "push-switch",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev		= {
+		.platform_data = &psw1_platform_data,
+	},
+};
+
+static struct platform_device psw2_switch_device = {
+	.name		= "push-switch",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev		= {
+		.platform_data = &psw2_platform_data,
+	},
+};
+
+static struct platform_device psw3_switch_device = {
+	.name		= "push-switch",
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(psw_usl5p_resources),
+	.resource	= psw_usl5p_resources,
+	.dev = {
+		.platform_data = &psw3_platform_data,
+	},
+};
+
+static struct platform_device *psw_devices[] = {
+	&psw_power_switch_device,
+	&psw1_switch_device,
+	&psw2_switch_device,
+	&psw3_switch_device,
+};
+
+static int __init psw_init(void)
+{
+	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
+}
+module_init(psw_init);
diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
new file mode 100644
index 000000000000..db22ea2e6d49
--- /dev/null
+++ b/arch/sh/boards/mach-landisk/setup.c
@@ -0,0 +1,105 @@
+/*
+ * arch/sh/boards/landisk/setup.c
+ *
+ * I-O DATA Device, Inc. LANDISK Support.
+ *
+ * Copyright (C) 2000 Kazumoto Kojima
+ * Copyright (C) 2002 Paul Mundt
+ * Copylight (C) 2002 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2005-2007 kogiidena
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/pm.h>
+#include <linux/mm.h>
+#include <asm/machvec.h>
+#include <mach-landisk/mach/iodata_landisk.h>
+#include <asm/io.h>
+
+void init_landisk_IRQ(void);
+
+static void landisk_power_off(void)
+{
+        ctrl_outb(0x01, PA_SHUTDOWN);
+}
+
+static struct resource cf_ide_resources[3];
+
+static struct pata_platform_info pata_info = {
+	.ioport_shift	= 1,
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+	.dev		= {
+		.platform_data = &pata_info,
+	},
+};
+
+static struct platform_device rtc_device = {
+	.name		= "rs5c313",
+	.id		= -1,
+};
+
+static struct platform_device *landisk_devices[] __initdata = {
+	&cf_ide_device,
+	&rtc_device,
+};
+
+static int __init landisk_devices_setup(void)
+{
+	pgprot_t prot;
+	unsigned long paddrbase;
+	void *cf_ide_base;
+
+	/* open I/O area window */
+	paddrbase = virt_to_phys((void *)PA_AREA5_IO);
+	prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_IO16);
+	cf_ide_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot);
+	if (!cf_ide_base) {
+		printk("allocate_cf_area : can't open CF I/O window!\n");
+		return -ENOMEM;
+	}
+
+	/* IDE cmd address : 0x1f0-0x1f7 and 0x3f6 */
+	cf_ide_resources[0].start = (unsigned long)cf_ide_base + 0x40;
+	cf_ide_resources[0].end   = (unsigned long)cf_ide_base + 0x40 + 0x0f;
+	cf_ide_resources[0].flags = IORESOURCE_IO;
+	cf_ide_resources[1].start = (unsigned long)cf_ide_base + 0x2c;
+	cf_ide_resources[1].end   = (unsigned long)cf_ide_base + 0x2c + 0x03;
+	cf_ide_resources[1].flags = IORESOURCE_IO;
+	cf_ide_resources[2].start = IRQ_FATA;
+	cf_ide_resources[2].flags = IORESOURCE_IRQ;
+
+	return platform_add_devices(landisk_devices,
+				    ARRAY_SIZE(landisk_devices));
+}
+
+__initcall(landisk_devices_setup);
+
+static void __init landisk_setup(char **cmdline_p)
+{
+        /* LED ON */
+	ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED);
+
+	printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
+	pm_power_off = landisk_power_off;
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_landisk __initmv = {
+	.mv_name = "LANDISK",
+	.mv_nr_irqs = 72,
+	.mv_setup = landisk_setup,
+	.mv_init_irq = init_landisk_IRQ,
+};
diff --git a/arch/sh/boards/lboxre2/Makefile b/arch/sh/boards/mach-lboxre2/Makefile
index e9ed140c06f6..e9ed140c06f6 100644
--- a/arch/sh/boards/lboxre2/Makefile
+++ b/arch/sh/boards/mach-lboxre2/Makefile
diff --git a/arch/sh/boards/lboxre2/irq.c b/arch/sh/boards/mach-lboxre2/irq.c
index 5a1c3bbe7b50..5a1c3bbe7b50 100644
--- a/arch/sh/boards/lboxre2/irq.c
+++ b/arch/sh/boards/mach-lboxre2/irq.c
diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c
index c74440d38ee9..c74440d38ee9 100644
--- a/arch/sh/boards/lboxre2/setup.c
+++ b/arch/sh/boards/mach-lboxre2/setup.c
diff --git a/arch/sh/boards/superh/microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile
index 1387dd6c85eb..1387dd6c85eb 100644
--- a/arch/sh/boards/superh/microdev/Makefile
+++ b/arch/sh/boards/mach-microdev/Makefile
diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/mach-microdev/io.c
index 9f8a540f7e14..9f8a540f7e14 100644
--- a/arch/sh/boards/superh/microdev/io.c
+++ b/arch/sh/boards/mach-microdev/io.c
diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c
index 4d335077a3ff..4d335077a3ff 100644
--- a/arch/sh/boards/superh/microdev/irq.c
+++ b/arch/sh/boards/mach-microdev/irq.c
diff --git a/arch/sh/boards/superh/microdev/led.c b/arch/sh/boards/mach-microdev/led.c
index 36e54b47a752..36e54b47a752 100644
--- a/arch/sh/boards/superh/microdev/led.c
+++ b/arch/sh/boards/mach-microdev/led.c
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c
index fc8cd06d66cf..fc8cd06d66cf 100644
--- a/arch/sh/boards/superh/microdev/setup.c
+++ b/arch/sh/boards/mach-microdev/setup.c
diff --git a/arch/sh/boards/mach-migor/Kconfig b/arch/sh/boards/mach-migor/Kconfig
new file mode 100644
index 000000000000..a7b3b728ec3c
--- /dev/null
+++ b/arch/sh/boards/mach-migor/Kconfig
@@ -0,0 +1,15 @@
+if SH_MIGOR
+
+choice
+	prompt "Migo-R LCD Panel Board Selection"
+	default SH_MIGOR_QVGA
+
+config SH_MIGOR_QVGA
+	bool "QVGA (320x240)"
+
+config SH_MIGOR_RTA_WVGA
+	bool "RTA WVGA (800x480)"
+
+endchoice
+
+endif
diff --git a/arch/sh/boards/mach-migor/Makefile b/arch/sh/boards/mach-migor/Makefile
new file mode 100644
index 000000000000..5f231dd25c0e
--- /dev/null
+++ b/arch/sh/boards/mach-migor/Makefile
@@ -0,0 +1,2 @@
+obj-y	 := setup.o
+obj-$(CONFIG_SH_MIGOR_QVGA)	+=  lcd_qvga.o
diff --git a/arch/sh/boards/mach-migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c
new file mode 100644
index 000000000000..6e9609596448
--- /dev/null
+++ b/arch/sh/boards/mach-migor/lcd_qvga.c
@@ -0,0 +1,165 @@
+/*
+ * Support for SuperH MigoR Quarter VGA LCD Panel
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd.
+ * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/migor.h>
+
+/* LCD Module is a PH240320T according to board schematics. This module
+ * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?)
+ * Driver IC. This IC is connected to the SH7722 built-in LCDC using a
+ * SYS-80 interface configured in 16 bit mode.
+ *
+ * Index 0: "Device Code Read" returns 0x1505.
+ */
+
+static void reset_lcd_module(void)
+{
+	ctrl_outb(ctrl_inb(PORT_PHDR) & ~0x04, PORT_PHDR);
+	mdelay(2);
+	ctrl_outb(ctrl_inb(PORT_PHDR) | 0x04, PORT_PHDR);
+	mdelay(1);
+}
+
+/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */
+
+static unsigned long adjust_reg18(unsigned short data)
+{
+	unsigned long tmp1, tmp2;
+
+	tmp1 = (data<<1 | 0x00000001) & 0x000001FF;
+	tmp2 = (data<<2 | 0x00000200) & 0x0003FE00;
+	return tmp1 | tmp2;
+}
+
+static void write_reg(void *sys_ops_handle,
+		       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+		       unsigned short reg, unsigned short data)
+{
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data));
+}
+
+static void write_reg16(void *sys_ops_handle,
+			struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+			unsigned short reg, unsigned short data)
+{
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+	sys_ops->write_data(sys_ops_handle, adjust_reg18(data));
+}
+
+static unsigned long read_reg16(void *sys_ops_handle,
+				struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+				unsigned short reg)
+{
+	unsigned long data;
+
+	sys_ops->write_index(sys_ops_handle, adjust_reg18(reg));
+	data = sys_ops->read_data(sys_ops_handle);
+	return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00);
+}
+
+static void migor_lcd_qvga_seq(void *sys_ops_handle,
+			       struct sh_mobile_lcdc_sys_bus_ops *sys_ops,
+			       unsigned short const *data, int no_data)
+{
+	int i;
+
+	for (i = 0; i < no_data; i += 2)
+		write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]);
+}
+
+static const unsigned short sync_data[] = {
+	0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000,
+};
+
+static const unsigned short magic0_data[] = {
+	0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001,
+	0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116,
+	0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8,
+};
+
+static const unsigned short magic1_data[] = {
+	0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202,
+	0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303,
+	0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102,
+	0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300,
+	0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000,
+	0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000,
+	0x0015, 0x8000,
+};
+
+static const unsigned short magic2_data[] = {
+	0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021,
+};
+
+static const unsigned short magic3_data[] = {
+	0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061,
+};
+
+int migor_lcd_qvga_setup(void *board_data, void *sohandle,
+			 struct sh_mobile_lcdc_sys_bus_ops *so)
+{
+	unsigned long xres = 320;
+	unsigned long yres = 240;
+	int k;
+
+	reset_lcd_module();
+	migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+
+	if (read_reg16(sohandle, so, 0) != 0x1505)
+		return -ENODEV;
+
+	pr_info("Migo-R QVGA LCD Module detected.\n");
+
+	migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data));
+	write_reg16(sohandle, so, 0x00A4, 0x0001);
+	mdelay(10);
+
+	migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data));
+	mdelay(100);
+
+	migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data));
+	write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1));
+	write_reg16(sohandle, so, 0x0051, 0x00ef);
+	write_reg16(sohandle, so, 0x0052, 0x0000);
+	write_reg16(sohandle, so, 0x0053, xres - 1);
+
+	migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data));
+	mdelay(10);
+
+	migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data));
+	mdelay(40);
+
+	/* clear GRAM to avoid displaying garbage */
+
+	write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */
+	write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */
+
+	for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */
+		write_reg16(sohandle, so, 0x0022, 0x0000);
+
+	write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */
+	write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */
+	write_reg16(sohandle, so, 0x0007, 0x0173);
+	mdelay(40);
+
+	/* enable display */
+	write_reg(sohandle, so, 0x00, 0x22);
+	mdelay(100);
+	return 0;
+}
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
new file mode 100644
index 000000000000..e499ee384d58
--- /dev/null
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -0,0 +1,527 @@
+/*
+ * Renesas System Solutions Asia Pte. Ltd - Migo-R
+ *
+ * Copyright (C) 2008 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/smc91x.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/clock.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+#include <asm/sh_keysc.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/migor.h>
+
+/* Address     IRQ  Size  Bus  Description
+ * 0x00000000       64MB  16   NOR Flash (SP29PL256N)
+ * 0x0c000000       64MB  64   SDRAM (2xK4M563233G)
+ * 0x10000000  IRQ0       16   Ethernet (SMC91C111)
+ * 0x14000000  IRQ4       16   USB 2.0 Host Controller (M66596)
+ * 0x18000000       8GB    8   NAND Flash (K9K8G08U0A)
+ */
+
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "SMC91C111" ,
+		.start  = 0x10000300,
+		.end    = 0x1000030f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 32, /* IRQ0 */
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
+};
+
+static struct sh_keysc_info sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
+	.scan_timing = 3,
+	.delay = 5,
+	.keycodes = {
+		0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
+		0, KEY_F, KEY_C, KEY_D,	KEY_H, KEY_1,
+		0, KEY_2, KEY_3, KEY_4,	KEY_5, KEY_6,
+		0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
+		0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
+	},
+};
+
+static struct resource sh_keysc_resources[] = {
+	[0] = {
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_keysc_device = {
+	.name           = "sh_keysc",
+	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
+	.resource       = sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &sh_keysc_info,
+	},
+};
+
+static struct mtd_partition migor_nor_flash_partitions[] =
+{
+	{
+		.name = "uboot",
+		.offset = 0,
+		.size = (1 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	},
+	{
+		.name = "rootfs",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (15 * 1024 * 1024),
+	},
+	{
+		.name = "other",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data migor_nor_flash_data = {
+	.width		= 2,
+	.parts		= migor_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(migor_nor_flash_partitions),
+};
+
+static struct resource migor_nor_flash_resources[] = {
+	[0] = {
+		.name		= "NOR Flash",
+		.start		= 0x00000000,
+		.end		= 0x03ffffff,
+		.flags		= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device migor_nor_flash_device = {
+	.name		= "physmap-flash",
+	.resource	= migor_nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(migor_nor_flash_resources),
+	.dev		= {
+		.platform_data = &migor_nor_flash_data,
+	},
+};
+
+static struct mtd_partition migor_nand_flash_partitions[] = {
+	{
+		.name		= "nanddata1",
+		.offset		= 0x0,
+		.size		= 512 * 1024 * 1024,
+	},
+	{
+		.name		= "nanddata2",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 512 * 1024 * 1024,
+	},
+};
+
+static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd,
+				     unsigned int ctrl)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, chip->IO_ADDR_W + 0x00400000);
+	else if (ctrl & NAND_ALE)
+		writeb(cmd, chip->IO_ADDR_W + 0x00800000);
+	else
+		writeb(cmd, chip->IO_ADDR_W);
+}
+
+static int migor_nand_flash_ready(struct mtd_info *mtd)
+{
+	return ctrl_inb(PORT_PADR) & 0x02; /* PTA1 */
+}
+
+struct platform_nand_data migor_nand_flash_data = {
+	.chip = {
+		.nr_chips = 1,
+		.partitions = migor_nand_flash_partitions,
+		.nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
+		.chip_delay = 20,
+		.part_probe_types = (const char *[]) { "cmdlinepart", NULL },
+	},
+	.ctrl = {
+		.dev_ready = migor_nand_flash_ready,
+		.cmd_ctrl = migor_nand_flash_cmd_ctl,
+	},
+};
+
+static struct resource migor_nand_flash_resources[] = {
+	[0] = {
+		.name		= "NAND Flash",
+		.start		= 0x18000000,
+		.end		= 0x18ffffff,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device migor_nand_flash_device = {
+	.name		= "gen_nand",
+	.resource	= migor_nand_flash_resources,
+	.num_resources	= ARRAY_SIZE(migor_nand_flash_resources),
+	.dev		= {
+		.platform_data = &migor_nand_flash_data,
+	}
+};
+
+static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = {
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = RGB16,
+		.clock_divider = 2,
+		.lcd_cfg = {
+			.name = "LB070WV1",
+			.xres = 800,
+			.yres = 480,
+			.left_margin = 64,
+			.right_margin = 16,
+			.hsync_len = 120,
+			.upper_margin = 1,
+			.lower_margin = 17,
+			.vsync_len = 2,
+			.sync = 0,
+		},
+	}
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+	.clock_source = LCDC_CLK_PERIPHERAL,
+	.ch[0] = {
+		.chan = LCDC_CHAN_MAINLCD,
+		.bpp = 16,
+		.interface_type = SYS16A,
+		.clock_divider = 10,
+		.lcd_cfg = {
+			.name = "PH240320T",
+			.xres = 320,
+			.yres = 240,
+			.left_margin = 0,
+			.right_margin = 16,
+			.hsync_len = 8,
+			.upper_margin = 1,
+			.lower_margin = 17,
+			.vsync_len = 2,
+			.sync = FB_SYNC_HOR_HIGH_ACT,
+		},
+		.board_cfg = {
+			.setup_sys = migor_lcd_qvga_setup,
+		},
+		.sys_bus_cfg = {
+			.ldmt2r = 0x06000a09,
+			.ldmt3r = 0x180e3418,
+		},
+	}
+#endif
+};
+
+static struct resource migor_lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000, /* P4-only space */
+		.end	= 0xfe941fff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device migor_lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(migor_lcdc_resources),
+	.resource	= migor_lcdc_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_lcdc_info,
+	},
+};
+
+static struct clk *camera_clk;
+
+static void camera_power_on(void)
+{
+	unsigned char value;
+
+	camera_clk = clk_get(NULL, "video_clk");
+	clk_set_rate(camera_clk, 24000000);
+	clk_enable(camera_clk);	/* start VIO_CKO */
+
+	mdelay(10);
+	value = ctrl_inb(PORT_PTDR);
+	value &= ~0x09;
+#ifndef CONFIG_SH_MIGOR_RTA_WVGA
+	value |= 0x01;
+#endif
+	ctrl_outb(value, PORT_PTDR);
+	mdelay(10);
+
+	ctrl_outb(value | 8, PORT_PTDR);
+}
+
+static void camera_power_off(void)
+{
+	clk_disable(camera_clk); /* stop VIO_CKO */
+	clk_put(camera_clk);
+
+	ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR);
+}
+
+#ifdef CONFIG_I2C
+static unsigned char camera_ov772x_magic[] =
+{
+	0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01,
+	0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00,
+	0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07,
+	0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10,
+	0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0,
+	0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00,
+	0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00,
+	0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2,
+	0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80,
+	0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00,
+	0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50,
+	0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60,
+	0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a,
+	0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f,
+	0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00,
+	0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01,
+	0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f,
+	0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f,
+	0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70,
+	0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e,
+	0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69,
+	0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f,
+	0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4,
+	0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00,
+	0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f,
+	0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08,
+	0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e,
+	0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02,
+	0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06,
+	0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40,
+	0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff,
+	0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f,
+	0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50,
+	0x2c, 0x78,
+};
+
+static int ov772x_set_capture(struct soc_camera_platform_info *info,
+			      int enable)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int ret = 0;
+	int i;
+
+	if (!enable)
+		return 0; /* camera_power_off() is enough */
+
+	for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) {
+		u_int8_t buf[8];
+
+		msg.addr = 0x21;
+		msg.buf = buf;
+		msg.len = 2;
+		msg.flags = 0;
+
+		buf[0] = camera_ov772x_magic[i];
+		buf[1] = camera_ov772x_magic[i + 1];
+
+		ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+	}
+
+	return ret;
+}
+
+static struct soc_camera_platform_info ov772x_info = {
+	.iface = 0,
+	.format_name = "RGB565",
+	.format_depth = 16,
+	.format = {
+		.pixelformat = V4L2_PIX_FMT_RGB565,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.width = 320,
+		.height = 240,
+	},
+	.bus_param =  SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+	SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+	.set_capture = ov772x_set_capture,
+};
+
+static struct platform_device migor_camera_device = {
+	.name		= "soc_camera_platform",
+	.dev	= {
+		.platform_data	= &ov772x_info,
+	},
+};
+#endif /* CONFIG_I2C */
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+	.flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \
+	| SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH,
+	.enable_camera = camera_power_on,
+	.disable_camera = camera_power_off,
+};
+
+static struct resource migor_ceu_resources[] = {
+	[0] = {
+		.name	= "CEU",
+		.start	= 0xfe910000,
+		.end	= 0xfe91009f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 52,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device migor_ceu_device = {
+	.name		= "sh_mobile_ceu",
+	.num_resources	= ARRAY_SIZE(migor_ceu_resources),
+	.resource	= migor_ceu_resources,
+	.dev	= {
+		.platform_data	= &sh_mobile_ceu_info,
+	},
+};
+
+static struct platform_device *migor_devices[] __initdata = {
+	&smc91x_eth_device,
+	&sh_keysc_device,
+	&migor_lcdc_device,
+	&migor_ceu_device,
+#ifdef CONFIG_I2C
+	&migor_camera_device,
+#endif
+	&migor_nor_flash_device,
+	&migor_nand_flash_device,
+};
+
+static struct i2c_board_info migor_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372b", 0x32),
+	},
+	{
+		I2C_BOARD_INFO("migor_ts", 0x51),
+		.irq = 38, /* IRQ6 */
+	},
+};
+
+static int __init migor_devices_setup(void)
+{
+	clk_always_enable("mstp214"); /* KEYSC */
+	clk_always_enable("mstp200"); /* LCDC */
+	clk_always_enable("mstp203"); /* CEU */
+
+	platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20);
+
+	i2c_register_board_info(0, migor_i2c_devices,
+				ARRAY_SIZE(migor_i2c_devices));
+ 
+	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
+}
+__initcall(migor_devices_setup);
+
+static void __init migor_setup(char **cmdline_p)
+{
+	/* SMC91C111 - Enable IRQ0 */
+	ctrl_outw(ctrl_inw(PORT_PJCR) & ~0x0003, PORT_PJCR);
+
+	/* KEYSC */
+	ctrl_outw(ctrl_inw(PORT_PYCR) & ~0x0fff, PORT_PYCR);
+	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0x0ff0, PORT_PZCR);
+	ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
+
+	/* NAND Flash */
+	ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR);
+	ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200,
+		  BSC_CS6ABCR);
+
+	/* Touch Panel - Enable IRQ6 */
+	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR);
+	ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA);
+	ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC);
+
+#ifdef CONFIG_SH_MIGOR_RTA_WVGA
+	/* LCDC - WVGA - Enable RGB Interface signals */
+	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+	ctrl_outw(0x0000, PORT_PHCR);
+	ctrl_outw(0x0000, PORT_PLCR);
+	ctrl_outw(0x0000, PORT_PMCR);
+	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x000f, PORT_PRCR);
+	ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x000d) | 0x0400, PORT_PSELD);
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0100, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
+#ifdef CONFIG_SH_MIGOR_QVGA
+	/* LCDC - QVGA - Enable SYS Interface signals */
+	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR);
+	ctrl_outw((ctrl_inw(PORT_PHCR) & ~0xcfff) | 0x0010, PORT_PHCR);
+	ctrl_outw(0x0000, PORT_PLCR);
+	ctrl_outw(0x0000, PORT_PMCR);
+	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x030f, PORT_PRCR);
+	ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x0001) | 0x0420, PORT_PSELD);
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA);
+#endif
+
+	/* CEU */
+	ctrl_outw((ctrl_inw(PORT_PTCR) & ~0x03c3) | 0x0051, PORT_PTCR);
+	ctrl_outw(ctrl_inw(PORT_PUCR) & ~0x03ff, PORT_PUCR);
+	ctrl_outw(ctrl_inw(PORT_PVCR) & ~0x03ff, PORT_PVCR);
+	ctrl_outw(ctrl_inw(PORT_PWCR) & ~0x3c00, PORT_PWCR);
+	ctrl_outw(ctrl_inw(PORT_PSELC) | 0x0001, PORT_PSELC);
+	ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x2000, PORT_PSELD);
+	ctrl_outw(ctrl_inw(PORT_PSELE) | 0x000f, PORT_PSELE);
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2200, PORT_MSELCRB);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x0a00, PORT_HIZCRA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRB) & ~0x0003, PORT_HIZCRB);
+}
+
+static struct sh_machine_vector mv_migor __initmv = {
+	.mv_name		= "Migo-R",
+	.mv_setup		= migor_setup,
+};
diff --git a/arch/sh/boards/renesas/rts7751r2d/Kconfig b/arch/sh/boards/mach-r2d/Kconfig
index 8122a9667fc9..8122a9667fc9 100644
--- a/arch/sh/boards/renesas/rts7751r2d/Kconfig
+++ b/arch/sh/boards/mach-r2d/Kconfig
diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/mach-r2d/Makefile
index 0d4c75a72be0..0d4c75a72be0 100644
--- a/arch/sh/boards/renesas/rts7751r2d/Makefile
+++ b/arch/sh/boards/mach-r2d/Makefile
diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
index 8e49f6e51247..8e49f6e51247 100644
--- a/arch/sh/boards/renesas/rts7751r2d/irq.c
+++ b/arch/sh/boards/mach-r2d/irq.c
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c
index 2308e8753bcd..2308e8753bcd 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/mach-r2d/setup.c
diff --git a/arch/sh/boards/renesas/sdk7780/Kconfig b/arch/sh/boards/mach-sdk7780/Kconfig
index 065f1df09bf1..065f1df09bf1 100644
--- a/arch/sh/boards/renesas/sdk7780/Kconfig
+++ b/arch/sh/boards/mach-sdk7780/Kconfig
diff --git a/arch/sh/boards/renesas/sdk7780/Makefile b/arch/sh/boards/mach-sdk7780/Makefile
index 3d8f0befc35d..3d8f0befc35d 100644
--- a/arch/sh/boards/renesas/sdk7780/Makefile
+++ b/arch/sh/boards/mach-sdk7780/Makefile
diff --git a/arch/sh/boards/renesas/sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c
index 87cdc578f6ff..87cdc578f6ff 100644
--- a/arch/sh/boards/renesas/sdk7780/irq.c
+++ b/arch/sh/boards/mach-sdk7780/irq.c
diff --git a/arch/sh/boards/renesas/sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c
index acc5932587f1..acc5932587f1 100644
--- a/arch/sh/boards/renesas/sdk7780/setup.c
+++ b/arch/sh/boards/mach-sdk7780/setup.c
diff --git a/arch/sh/boards/se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile
index 63e7ed699f39..63e7ed699f39 100644
--- a/arch/sh/boards/se/7206/Makefile
+++ b/arch/sh/boards/mach-se/7206/Makefile
diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c
new file mode 100644
index 000000000000..9c3a33210d61
--- /dev/null
+++ b/arch/sh/boards/mach-se/7206/io.c
@@ -0,0 +1,104 @@
+/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
+ *
+ * linux/arch/sh/boards/se/7206/io.c
+ *
+ * Copyright (C) 2006 Yoshinori Sato
+ *
+ * I/O routine for Hitachi 7206 SolutionEngine.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7206.h>
+
+
+static inline void delay(void)
+{
+	ctrl_inw(0x20000000);  /* P2 ROM Area */
+}
+
+/* MS7750 requires special versions of in*, out* routines, since
+   PC-like io ports are located at upper half byte of 16-bit word which
+   can be accessed only with 16-bit wide.  */
+
+static inline volatile __u16 *
+port2adr(unsigned int port)
+{
+	if (port >= 0x2000 && port < 0x2020)
+		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
+	else if (port >= 0x300 && port < 0x310)
+		return (volatile __u16 *) (PA_SMSC + (port - 0x300));
+
+	return (volatile __u16 *)port;
+}
+
+unsigned char se7206_inb(unsigned long port)
+{
+	return (*port2adr(port)) & 0xff;
+}
+
+unsigned char se7206_inb_p(unsigned long port)
+{
+	unsigned long v;
+
+	v = (*port2adr(port)) & 0xff;
+	delay();
+	return v;
+}
+
+unsigned short se7206_inw(unsigned long port)
+{
+	return *port2adr(port);;
+}
+
+void se7206_outb(unsigned char value, unsigned long port)
+{
+	*(port2adr(port)) = value;
+}
+
+void se7206_outb_p(unsigned char value, unsigned long port)
+{
+	*(port2adr(port)) = value;
+	delay();
+}
+
+void se7206_outw(unsigned short value, unsigned long port)
+{
+	*port2adr(port) = value;
+}
+
+void se7206_insb(unsigned long port, void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	__u8 *ap = addr;
+
+	while (count--)
+		*ap++ = *p;
+}
+
+void se7206_insw(unsigned long port, void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	__u16 *ap = addr;
+	while (count--)
+		*ap++ = *p;
+}
+
+void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	const __u8 *ap = addr;
+
+	while (count--)
+		*p = *ap++;
+}
+
+void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	const __u16 *ap = addr;
+	while (count--)
+		*p = *ap++;
+}
diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c
new file mode 100644
index 000000000000..aef7f052851a
--- /dev/null
+++ b/arch/sh/boards/mach-se/7206/irq.c
@@ -0,0 +1,146 @@
+/*
+ * linux/arch/sh/boards/se/7206/irq.c
+ *
+ * Copyright (C) 2005,2006 Yoshinori Sato
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <mach-se/mach/se7206.h>
+
+#define INTSTS0 0x31800000
+#define INTSTS1 0x31800002
+#define INTMSK0 0x31800004
+#define INTMSK1 0x31800006
+#define INTSEL  0x31800008
+
+#define IRQ0_IRQ 64
+#define IRQ1_IRQ 65
+#define IRQ3_IRQ 67
+
+#define INTC_IPR01 0xfffe0818
+#define INTC_ICR1  0xfffe0802
+
+static void disable_se7206_irq(unsigned int irq)
+{
+	unsigned short val;
+	unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
+	unsigned short msk0,msk1;
+
+	/* Set the priority in IPR to 0 */
+	val = ctrl_inw(INTC_IPR01);
+	val &= mask;
+	ctrl_outw(val, INTC_IPR01);
+	/* FPGA mask set */
+	msk0 = ctrl_inw(INTMSK0);
+	msk1 = ctrl_inw(INTMSK1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		msk0 |= 0x0010;
+		break;
+	case IRQ1_IRQ:
+		msk0 |= 0x000f;
+		break;
+	case IRQ3_IRQ:
+		msk0 |= 0x0f00;
+		msk1 |= 0x00ff;
+		break;
+	}
+	ctrl_outw(msk0, INTMSK0);
+	ctrl_outw(msk1, INTMSK1);
+}
+
+static void enable_se7206_irq(unsigned int irq)
+{
+	unsigned short val;
+	unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
+	unsigned short msk0,msk1;
+
+	/* Set priority in IPR back to original value */
+	val = ctrl_inw(INTC_IPR01);
+	val |= value;
+	ctrl_outw(val, INTC_IPR01);
+
+	/* FPGA mask reset */
+	msk0 = ctrl_inw(INTMSK0);
+	msk1 = ctrl_inw(INTMSK1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		msk0 &= ~0x0010;
+		break;
+	case IRQ1_IRQ:
+		msk0 &= ~0x000f;
+		break;
+	case IRQ3_IRQ:
+		msk0 &= ~0x0f00;
+		msk1 &= ~0x00ff;
+		break;
+	}
+	ctrl_outw(msk0, INTMSK0);
+	ctrl_outw(msk1, INTMSK1);
+}
+
+static void eoi_se7206_irq(unsigned int irq)
+{
+	unsigned short sts0,sts1;
+
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_se7206_irq(irq);
+	/* FPGA isr clear */
+	sts0 = ctrl_inw(INTSTS0);
+	sts1 = ctrl_inw(INTSTS1);
+
+	switch (irq) {
+	case IRQ0_IRQ:
+		sts0 &= ~0x0010;
+		break;
+	case IRQ1_IRQ:
+		sts0 &= ~0x000f;
+		break;
+	case IRQ3_IRQ:
+		sts0 &= ~0x0f00;
+		sts1 &= ~0x00ff;
+		break;
+	}
+	ctrl_outw(sts0, INTSTS0);
+	ctrl_outw(sts1, INTSTS1);
+}
+
+static struct irq_chip se7206_irq_chip __read_mostly = {
+	.name		= "SE7206-FPGA",
+	.mask		= disable_se7206_irq,
+	.unmask		= enable_se7206_irq,
+	.mask_ack	= disable_se7206_irq,
+	.eoi		= eoi_se7206_irq,
+};
+
+static void make_se7206_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	set_irq_chip_and_handler_name(irq, &se7206_irq_chip,
+				      handle_level_irq, "level");
+	disable_se7206_irq(irq);
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7206_IRQ(void)
+{
+	make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
+	make_se7206_irq(IRQ1_IRQ); /* ATA */
+	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
+	ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
+
+	/* FPGA System register setup*/
+	ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */
+	ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */
+	/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
+	ctrl_outw(0x0001,INTSEL);
+}
diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c
new file mode 100644
index 000000000000..f5466384972e
--- /dev/null
+++ b/arch/sh/boards/mach-se/7206/setup.c
@@ -0,0 +1,108 @@
+/*
+ *
+ * linux/arch/sh/boards/se/7206/setup.c
+ *
+ * Copyright (C) 2006  Yoshinori Sato
+ * Copyright (C) 2007 - 2008  Paul Mundt
+ *
+ * Hitachi 7206 SolutionEngine Support.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/smc91x.h>
+#include <mach-se/mach/se7206.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+#include <asm/heartbeat.h>
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name		= "smc91x-regs",
+		.start		= PA_SMSC + 0x300,
+		.end		= PA_SMSC + 0x300 + 0x020 - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= 64,
+		.end		= 64,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &smc91x_info,
+	},
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 32,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *se7206_devices[] __initdata = {
+	&smc91x_device,
+	&heartbeat_device,
+};
+
+static int __init se7206_devices_setup(void)
+{
+	return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
+}
+__initcall(se7206_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+
+static struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_nr_irqs		= 256,
+	.mv_inb			= se7206_inb,
+	.mv_inw			= se7206_inw,
+	.mv_outb		= se7206_outb,
+	.mv_outw		= se7206_outw,
+
+	.mv_inb_p		= se7206_inb_p,
+	.mv_inw_p		= se7206_inw,
+	.mv_outb_p		= se7206_outb_p,
+	.mv_outw_p		= se7206_outw,
+
+	.mv_insb		= se7206_insb,
+	.mv_insw		= se7206_insw,
+	.mv_outsb		= se7206_outsb,
+	.mv_outsw		= se7206_outsw,
+
+	.mv_init_irq		= init_se7206_IRQ,
+};
diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/mach-se/7343/Makefile
index 3024796c6203..3024796c6203 100644
--- a/arch/sh/boards/se/7343/Makefile
+++ b/arch/sh/boards/mach-se/7343/Makefile
diff --git a/arch/sh/boards/mach-se/7343/io.c b/arch/sh/boards/mach-se/7343/io.c
new file mode 100644
index 000000000000..8741abc1da7b
--- /dev/null
+++ b/arch/sh/boards/mach-se/7343/io.c
@@ -0,0 +1,273 @@
+/*
+ * arch/sh/boards/se/7343/io.c
+ *
+ * I/O routine for SH-Mobile3AS 7343 SolutionEngine.
+ *
+ */
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7343.h>
+
+#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
+
+struct iop {
+	unsigned long start, end;
+	unsigned long base;
+	struct iop *(*check) (struct iop * p, unsigned long port);
+	unsigned char (*inb) (struct iop * p, unsigned long port);
+	unsigned short (*inw) (struct iop * p, unsigned long port);
+	void (*outb) (struct iop * p, unsigned char value, unsigned long port);
+	void (*outw) (struct iop * p, unsigned short value, unsigned long port);
+};
+
+struct iop *
+simple_check(struct iop *p, unsigned long port)
+{
+	static int count;
+
+	if (count < 100)
+		count++;
+
+	port &= 0xFFFF;
+
+	if ((p->start <= port) && (port <= p->end))
+		return p;
+	else
+		badio(check, port);
+}
+
+struct iop *
+ide_check(struct iop *p, unsigned long port)
+{
+	if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
+		return p;
+	return NULL;
+}
+
+unsigned char
+simple_inb(struct iop *p, unsigned long port)
+{
+	return *(unsigned char *) (p->base + port);
+}
+
+unsigned short
+simple_inw(struct iop *p, unsigned long port)
+{
+	return *(unsigned short *) (p->base + port);
+}
+
+void
+simple_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+	*(unsigned char *) (p->base + port) = value;
+}
+
+void
+simple_outw(struct iop *p, unsigned short value, unsigned long port)
+{
+	*(unsigned short *) (p->base + port) = value;
+}
+
+unsigned char
+pcc_inb(struct iop *p, unsigned long port)
+{
+	unsigned long addr = p->base + port + 0x40000;
+	unsigned long v;
+
+	if (port & 1)
+		addr += 0x00400000;
+	v = *(volatile unsigned char *) addr;
+	return v;
+}
+
+void
+pcc_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+	unsigned long addr = p->base + port + 0x40000;
+
+	if (port & 1)
+		addr += 0x00400000;
+	*(volatile unsigned char *) addr = value;
+}
+
+unsigned char
+bad_inb(struct iop *p, unsigned long port)
+{
+	badio(inb, port);
+}
+
+void
+bad_outb(struct iop *p, unsigned char value, unsigned long port)
+{
+	badio(inw, port);
+}
+
+#ifdef CONFIG_SMC91X
+/* MSTLANEX01 LAN at 0xb400:0000 */
+static struct iop laniop = {
+	.start = 0x00,
+	.end = 0x0F,
+	.base = 0x04000000,
+	.check = simple_check,
+	.inb = simple_inb,
+	.inw = simple_inw,
+	.outb = simple_outb,
+	.outw = simple_outw,
+};
+#endif
+
+#ifdef CONFIG_NE2000
+/* NE2000 pc card NIC */
+static struct iop neiop = {
+	.start = 0x280,
+	.end = 0x29f,
+	.base = 0xb0600000 + 0x80,	/* soft 0x280 -> hard 0x300 */
+	.check = simple_check,
+	.inb = pcc_inb,
+	.inw = simple_inw,
+	.outb = pcc_outb,
+	.outw = simple_outw,
+};
+#endif
+
+#ifdef CONFIG_IDE
+/* CF in CF slot */
+static struct iop cfiop = {
+	.base = 0xb0600000,
+	.check = ide_check,
+	.inb = pcc_inb,
+	.inw = simple_inw,
+	.outb = pcc_outb,
+	.outw = simple_outw,
+};
+#endif
+
+static __inline__ struct iop *
+port2iop(unsigned long port)
+{
+	if (0) ;
+#if defined(CONFIG_SMC91X)
+	else if (laniop.check(&laniop, port))
+		return &laniop;
+#endif
+#if defined(CONFIG_NE2000)
+	else if (neiop.check(&neiop, port))
+		return &neiop;
+#endif
+#if defined(CONFIG_IDE)
+	else if (cfiop.check(&cfiop, port))
+		return &cfiop;
+#endif
+	else
+		return NULL;
+}
+
+static inline void
+delay(void)
+{
+	ctrl_inw(0xac000000);
+	ctrl_inw(0xac000000);
+}
+
+unsigned char
+sh7343se_inb(unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	return (p->inb) (p, port);
+}
+
+unsigned char
+sh7343se_inb_p(unsigned long port)
+{
+	unsigned char v = sh7343se_inb(port);
+	delay();
+	return v;
+}
+
+unsigned short
+sh7343se_inw(unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	return (p->inw) (p, port);
+}
+
+unsigned int
+sh7343se_inl(unsigned long port)
+{
+	badio(inl, port);
+}
+
+void
+sh7343se_outb(unsigned char value, unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	(p->outb) (p, value, port);
+}
+
+void
+sh7343se_outb_p(unsigned char value, unsigned long port)
+{
+	sh7343se_outb(value, port);
+	delay();
+}
+
+void
+sh7343se_outw(unsigned short value, unsigned long port)
+{
+	struct iop *p = port2iop(port);
+	(p->outw) (p, value, port);
+}
+
+void
+sh7343se_outl(unsigned int value, unsigned long port)
+{
+	badio(outl, port);
+}
+
+void
+sh7343se_insb(unsigned long port, void *addr, unsigned long count)
+{
+	unsigned char *a = addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		*a++ = (p->inb) (p, port);
+}
+
+void
+sh7343se_insw(unsigned long port, void *addr, unsigned long count)
+{
+	unsigned short *a = addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		*a++ = (p->inw) (p, port);
+}
+
+void
+sh7343se_insl(unsigned long port, void *addr, unsigned long count)
+{
+	badio(insl, port);
+}
+
+void
+sh7343se_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+	unsigned char *a = (unsigned char *) addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		(p->outb) (p, *a++, port);
+}
+
+void
+sh7343se_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+	unsigned short *a = (unsigned short *) addr;
+	struct iop *p = port2iop(port);
+	while (count--)
+		(p->outw) (p, *a++, port);
+}
+
+void
+sh7343se_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+	badio(outsw, port);
+}
diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
new file mode 100644
index 000000000000..051c29d4eae0
--- /dev/null
+++ b/arch/sh/boards/mach-se/7343/irq.c
@@ -0,0 +1,79 @@
+/*
+ * linux/arch/sh/boards/se/7343/irq.c
+ *
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * Based on linux/arch/sh/boards/se/7722/irq.c
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7343.h>
+
+static void disable_se7343_irq(unsigned int irq)
+{
+	unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
+	ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK);
+}
+
+static void enable_se7343_irq(unsigned int irq)
+{
+	unsigned int bit = irq - SE7343_FPGA_IRQ_BASE;
+	ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK);
+}
+
+static struct irq_chip se7343_irq_chip __read_mostly = {
+	.name           = "SE7343-FPGA",
+	.mask           = disable_se7343_irq,
+	.unmask         = enable_se7343_irq,
+	.mask_ack       = disable_se7343_irq,
+};
+
+static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned short intv = ctrl_inw(PA_CPLD_ST);
+	struct irq_desc *ext_desc;
+	unsigned int ext_irq = SE7343_FPGA_IRQ_BASE;
+
+	intv &= (1 << SE7343_FPGA_IRQ_NR) - 1;
+
+	while (intv) {
+		if (intv & 1) {
+			ext_desc = irq_desc + ext_irq;
+			handle_level_irq(ext_irq, ext_desc);
+		}
+		intv >>= 1;
+		ext_irq++;
+	}
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7343se_IRQ(void)
+{
+	int i;
+
+	ctrl_outw(0, PA_CPLD_IMSK);	/* disable all irqs */
+	ctrl_outw(0x2000, 0xb03fffec);	/* mrshpc irq enable */
+
+	for (i = 0; i < SE7343_FPGA_IRQ_NR; i++)
+		set_irq_chip_and_handler_name(SE7343_FPGA_IRQ_BASE + i,
+					      &se7343_irq_chip,
+					      handle_level_irq, "level");
+
+	set_irq_chained_handler(IRQ0_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(IRQ1_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(IRQ4_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW);
+	set_irq_chained_handler(IRQ5_IRQ, se7343_irq_demux);
+	set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c
new file mode 100644
index 000000000000..486f40bf9274
--- /dev/null
+++ b/arch/sh/boards/mach-se/7343/setup.c
@@ -0,0 +1,152 @@
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7343.h>
+#include <asm/heartbeat.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= 0x10000000,
+		.end	= 0x1000000F,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/*
+		 * shared with other devices via externel
+		 * interrupt controller in FPGA...
+		 */
+		.start	= SMC_IRQ,
+		.end	= SMC_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+	{
+		.name		= "loader",
+		.offset		= 0x00000000,
+		.size		= 128 * 1024,
+	},
+	{
+		.name		= "rootfs",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 31 * 1024 * 1024,
+	},
+	{
+		.name		= "data",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data nor_flash_data = {
+	.width		= 2,
+	.parts		= nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+	[0]	= {
+		.start	= 0x00000000,
+		.end	= 0x01ffffff,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device nor_flash_device = {
+	.name		= "physmap-flash",
+	.dev		= {
+		.platform_data	= &nor_flash_data,
+	},
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+	.resource	= nor_flash_resources,
+};
+
+static struct platform_device *sh7343se_platform_devices[] __initdata = {
+	&smc91x_device,
+	&heartbeat_device,
+	&nor_flash_device,
+};
+
+static int __init sh7343se_devices_setup(void)
+{
+	return platform_add_devices(sh7343se_platform_devices,
+				    ARRAY_SIZE(sh7343se_platform_devices));
+}
+device_initcall(sh7343se_devices_setup);
+
+/*
+ * Initialize the board
+ */
+static void __init sh7343se_setup(char **cmdline_p)
+{
+	ctrl_outw(0xf900, FPGA_OUT);	/* FPGA */
+
+	ctrl_outw(0x0002, PORT_PECR);	/* PORT E 1 = IRQ5 */
+	ctrl_outw(0x0020, PORT_PSELD);
+
+	printk(KERN_INFO "MS7343CP01 Setup...done\n");
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_7343se __initmv = {
+	.mv_name = "SolutionEngine 7343",
+	.mv_setup = sh7343se_setup,
+	.mv_nr_irqs = 108,
+	.mv_inb = sh7343se_inb,
+	.mv_inw = sh7343se_inw,
+	.mv_inl = sh7343se_inl,
+	.mv_outb = sh7343se_outb,
+	.mv_outw = sh7343se_outw,
+	.mv_outl = sh7343se_outl,
+
+	.mv_inb_p = sh7343se_inb_p,
+	.mv_inw_p = sh7343se_inw,
+	.mv_inl_p = sh7343se_inl,
+	.mv_outb_p = sh7343se_outb_p,
+	.mv_outw_p = sh7343se_outw,
+	.mv_outl_p = sh7343se_outl,
+
+	.mv_insb = sh7343se_insb,
+	.mv_insw = sh7343se_insw,
+	.mv_insl = sh7343se_insl,
+	.mv_outsb = sh7343se_outsb,
+	.mv_outsw = sh7343se_outsw,
+	.mv_outsl = sh7343se_outsl,
+
+	.mv_init_irq = init_7343se_IRQ,
+};
diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile
index 8e624b06d5ea..8e624b06d5ea 100644
--- a/arch/sh/boards/se/770x/Makefile
+++ b/arch/sh/boards/mach-se/770x/Makefile
diff --git a/arch/sh/boards/mach-se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c
new file mode 100644
index 000000000000..28833c8786ea
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/io.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * I/O routine for Hitachi SolutionEngine.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <asm/io.h>
+#include <mach-se/mach/se.h>
+
+/* MS7750 requires special versions of in*, out* routines, since
+   PC-like io ports are located at upper half byte of 16-bit word which
+   can be accessed only with 16-bit wide.  */
+
+static inline volatile __u16 *
+port2adr(unsigned int port)
+{
+	if (port & 0xff000000)
+		return ( volatile __u16 *) port;
+	if (port >= 0x2000)
+		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
+	else if (port >= 0x1000)
+		return (volatile __u16 *) (PA_83902 + (port << 1));
+	else
+		return (volatile __u16 *) (PA_SUPERIO + (port << 1));
+}
+
+static inline int
+shifted_port(unsigned long port)
+{
+	/* For IDE registers, value is not shifted */
+	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
+		return 0;
+	else
+		return 1;
+}
+
+unsigned char se_inb(unsigned long port)
+{
+	if (shifted_port(port))
+		return (*port2adr(port) >> 8);
+	else
+		return (*port2adr(port))&0xff;
+}
+
+unsigned char se_inb_p(unsigned long port)
+{
+	unsigned long v;
+
+	if (shifted_port(port))
+		v = (*port2adr(port) >> 8);
+	else
+		v = (*port2adr(port))&0xff;
+	ctrl_delay();
+	return v;
+}
+
+unsigned short se_inw(unsigned long port)
+{
+	if (port >= 0x2000)
+		return *port2adr(port);
+	else
+		maybebadio(port);
+	return 0;
+}
+
+unsigned int se_inl(unsigned long port)
+{
+	maybebadio(port);
+	return 0;
+}
+
+void se_outb(unsigned char value, unsigned long port)
+{
+	if (shifted_port(port))
+		*(port2adr(port)) = value << 8;
+	else
+		*(port2adr(port)) = value;
+}
+
+void se_outb_p(unsigned char value, unsigned long port)
+{
+	if (shifted_port(port))
+		*(port2adr(port)) = value << 8;
+	else
+		*(port2adr(port)) = value;
+	ctrl_delay();
+}
+
+void se_outw(unsigned short value, unsigned long port)
+{
+	if (port >= 0x2000)
+		*port2adr(port) = value;
+	else
+		maybebadio(port);
+}
+
+void se_outl(unsigned int value, unsigned long port)
+{
+	maybebadio(port);
+}
+
+void se_insb(unsigned long port, void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	__u8 *ap = addr;
+
+	if (shifted_port(port)) {
+		while (count--)
+			*ap++ = *p >> 8;
+	} else {
+		while (count--)
+			*ap++ = *p;
+	}
+}
+
+void se_insw(unsigned long port, void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	__u16 *ap = addr;
+	while (count--)
+		*ap++ = *p;
+}
+
+void se_insl(unsigned long port, void *addr, unsigned long count)
+{
+	maybebadio(port);
+}
+
+void se_outsb(unsigned long port, const void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	const __u8 *ap = addr;
+
+	if (shifted_port(port)) {
+		while (count--)
+			*p = *ap++ << 8;
+	} else {
+		while (count--)
+			*p = *ap++;
+	}
+}
+
+void se_outsw(unsigned long port, const void *addr, unsigned long count)
+{
+	volatile __u16 *p = port2adr(port);
+	const __u16 *ap = addr;
+
+	while (count--)
+		*p = *ap++;
+}
+
+void se_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+	maybebadio(port);
+}
diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c
new file mode 100644
index 000000000000..ec1fea571b52
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/irq.c
@@ -0,0 +1,108 @@
+/*
+ * linux/arch/sh/boards/se/770x/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ * Copyright (C) 2006  Nobuhiro Iwamatsu
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se.h>
+
+static struct ipr_data ipr_irq_table[] = {
+	/*
+	* Super I/O (Just mimic PC):
+	*  1: keyboard
+	*  3: serial 0
+	*  4: serial 1
+	*  5: printer
+	*  6: floppy
+	*  8: rtc
+	* 12: mouse
+	* 14: ide0
+	*/
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+	/* This is default value */
+	{ 13, 0, 8,  0x0f-13, },
+	{ 5 , 0, 4,  0x0f- 5, },
+	{ 10, 1, 0,  0x0f-10, },
+	{ 7 , 2, 4,  0x0f- 7, },
+	{ 3 , 2, 0,  0x0f- 3, },
+	{ 1 , 3, 12, 0x0f- 1, },
+	{ 12, 3, 4,  0x0f-12, }, /* LAN */
+	{ 2 , 4, 8,  0x0f- 2, }, /* PCIRQ2 */
+	{ 6 , 4, 4,  0x0f- 6, }, /* PCIRQ1 */
+	{ 14, 4, 0,  0x0f-14, }, /* PCIRQ0 */
+	{ 0 , 5, 12, 0x0f   , }, 
+	{ 4 , 5, 4,  0x0f- 4, },
+	{ 8 , 6, 12, 0x0f- 8, },
+	{ 9 , 6, 8,  0x0f- 9, },
+	{ 11, 6, 4,  0x0f-11, },
+#else
+	{ 14, 0,  8, 0x0f-14, },
+	{ 12, 0,  4, 0x0f-12, },
+	{  8, 1,  4, 0x0f- 8, },
+	{  6, 2, 12, 0x0f- 6, },
+	{  5, 2,  8, 0x0f- 5, },
+	{  4, 2,  4, 0x0f- 4, },
+	{  3, 2,  0, 0x0f- 3, },
+	{  1, 3, 12, 0x0f- 1, },
+#if defined(CONFIG_STNIC)
+	/* ST NIC */
+	{ 10, 3,  4, 0x0f-10, }, 	/* LAN */
+#endif
+	/* MRSHPC IRQs setting */
+	{  0, 4, 12, 0x0f- 0, },	/* PCIRQ3 */
+	{ 11, 4,  8, 0x0f-11, }, 	/* PCIRQ2 */
+	{  9, 4,  4, 0x0f- 9, }, 	/* PCIRQ1 */
+	{  7, 4,  0, 0x0f- 7, }, 	/* PCIRQ0 */
+	/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
+	/* NOTE: #2 and #13 are not used on PC */
+	{ 13, 6,  4, 0x0f-13, }, 	/* SLOTIRQ2 */
+	{  2, 6,  0, 0x0f- 2, }, 	/* SLOTIRQ1 */
+#endif
+};
+
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+	.chip = {
+		.name	= "IPR-se770x",
+	},
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se_IRQ(void)
+{
+	/* Disable all interrupts */
+	ctrl_outw(0, BCR_ILCRA);
+	ctrl_outw(0, BCR_ILCRB);
+	ctrl_outw(0, BCR_ILCRC);
+	ctrl_outw(0, BCR_ILCRD);
+	ctrl_outw(0, BCR_ILCRE);
+	ctrl_outw(0, BCR_ILCRF);
+	ctrl_outw(0, BCR_ILCRG);
+
+	register_ipr_controller(&ipr_irq_desc);
+}
diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c
new file mode 100644
index 000000000000..9123d9687bf7
--- /dev/null
+++ b/arch/sh/boards/mach-se/770x/setup.c
@@ -0,0 +1,222 @@
+/*
+ * linux/arch/sh/boards/se/770x/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se.h>
+#include <asm/io.h>
+#include <asm/smc37c93x.h>
+#include <asm/heartbeat.h>
+
+/*
+ * Configure the Super I/O chip
+ */
+static void __init smsc_config(int index, int data)
+{
+	outb_p(index, INDEX_PORT);
+	outb_p(data, DATA_PORT);
+}
+
+/* XXX: Another candidate for a more generic cchip machine vector */
+static void __init smsc_setup(char **cmdline_p)
+{
+	outb_p(CONFIG_ENTER, CONFIG_PORT);
+	outb_p(CONFIG_ENTER, CONFIG_PORT);
+
+	/* FDC */
+	smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
+
+	/* AUXIO (GPIO): to use IDE1 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
+	smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
+	smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
+
+	/* COM1 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IO_BASE_HI_INDEX, 0x03);
+	smsc_config(IO_BASE_LO_INDEX, 0xf8);
+	smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
+
+	/* COM2 */
+	smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IO_BASE_HI_INDEX, 0x02);
+	smsc_config(IO_BASE_LO_INDEX, 0xf8);
+	smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
+
+	/* RTC */
+	smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
+	smsc_config(ACTIVATE_INDEX, 0x01);
+	smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
+
+	/* XXX: PARPORT, KBD, and MOUSE will come here... */
+	outb_p(CONFIG_EXIT, CONFIG_PORT);
+}
+
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = PA_MRSHPC_IO + 0x1f0,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start  = IRQ_CFCARD,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
+/* SH771X Ethernet driver */
+static struct resource sh_eth0_resources[] = {
+	[0] = {
+		.start = SH_ETH0_BASE,
+		.end = SH_ETH0_BASE + 0x1B8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_ETH0_IRQ,
+		.end = SH_ETH0_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth0_device = {
+	.name = "sh-eth",
+	.id	= 0,
+	.dev = {
+		.platform_data = PHY_ID,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth0_resources),
+	.resource = sh_eth0_resources,
+};
+
+static struct resource sh_eth1_resources[] = {
+	[0] = {
+		.start = SH_ETH1_BASE,
+		.end = SH_ETH1_BASE + 0x1B8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = SH_ETH1_IRQ,
+		.end = SH_ETH1_IRQ,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth1_device = {
+	.name = "sh-eth",
+	.id	= 1,
+	.dev = {
+		.platform_data = PHY_ID,
+	},
+	.num_resources = ARRAY_SIZE(sh_eth1_resources),
+	.resource = sh_eth1_resources,
+};
+#endif
+
+static struct platform_device *se_devices[] __initdata = {
+	&heartbeat_device,
+	&cf_ide_device,
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\
+	defined(CONFIG_CPU_SUBTYPE_SH7712)
+	&sh_eth0_device,
+	&sh_eth1_device,
+#endif
+};
+
+static int __init se_devices_setup(void)
+{
+	return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
+}
+device_initcall(se_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se __initmv = {
+	.mv_name		= "SolutionEngine",
+	.mv_setup		= smsc_setup,
+#if defined(CONFIG_CPU_SH4)
+	.mv_nr_irqs		= 48,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
+	.mv_nr_irqs		= 32,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
+	.mv_nr_irqs		= 61,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
+	.mv_nr_irqs		= 86,
+#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
+	.mv_nr_irqs             = 104,
+#endif
+
+	.mv_inb			= se_inb,
+	.mv_inw			= se_inw,
+	.mv_inl			= se_inl,
+	.mv_outb		= se_outb,
+	.mv_outw		= se_outw,
+	.mv_outl		= se_outl,
+
+	.mv_inb_p		= se_inb_p,
+	.mv_inw_p		= se_inw,
+	.mv_inl_p		= se_inl,
+	.mv_outb_p		= se_outb_p,
+	.mv_outw_p		= se_outw,
+	.mv_outl_p		= se_outl,
+
+	.mv_insb		= se_insb,
+	.mv_insw		= se_insw,
+	.mv_insl		= se_insl,
+	.mv_outsb		= se_outsb,
+	.mv_outsw		= se_outsw,
+	.mv_outsl		= se_outsl,
+
+	.mv_init_irq		= init_se_IRQ,
+};
diff --git a/arch/sh/boards/se/7721/Makefile b/arch/sh/boards/mach-se/7721/Makefile
index 7f09030980b3..7f09030980b3 100644
--- a/arch/sh/boards/se/7721/Makefile
+++ b/arch/sh/boards/mach-se/7721/Makefile
diff --git a/arch/sh/boards/mach-se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c
new file mode 100644
index 000000000000..b417acc4dad0
--- /dev/null
+++ b/arch/sh/boards/mach-se/7721/irq.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/se/7721/irq.c
+ *
+ * Copyright (C) 2008  Renesas Solutions Corp.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach-se/mach/se7721.h>
+
+enum {
+	UNUSED = 0,
+
+	/* board specific interrupt sources */
+	MRSHPC,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
+	  { 0, MRSHPC } },
+};
+
+static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
+			 NULL, NULL, prio_registers, NULL);
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7721_IRQ(void)
+{
+	/* PPCR */
+	ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118);
+
+	register_intc_controller(&intc_desc);
+	intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
+}
diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c
new file mode 100644
index 000000000000..d3fc80ff4d83
--- /dev/null
+++ b/arch/sh/boards/mach-se/7721/setup.c
@@ -0,0 +1,99 @@
+/*
+ * linux/arch/sh/boards/se/7721/setup.c
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * Hitachi UL SolutionEngine 7721 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7721.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+	.regsize	= 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start	= PA_MRSHPC_IO + 0x1f0,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 ,
+		.flags	= IORESOURCE_IO,
+	},
+	[1] = {
+		.start	= PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end	= PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
+		.flags	= IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = MRSHPC_IRQ0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+};
+
+static struct platform_device *se7721_devices[] __initdata = {
+	&cf_ide_device,
+	&heartbeat_device
+};
+
+static int __init se7721_devices_setup(void)
+{
+	return platform_add_devices(se7721_devices,
+		ARRAY_SIZE(se7721_devices));
+}
+device_initcall(se7721_devices_setup);
+
+static void __init se7721_setup(char **cmdline_p)
+{
+	/* for USB */
+	ctrl_outw(0x0000, 0xA405010C);	/* PGCR */
+	ctrl_outw(0x0000, 0xA405010E);	/* PHCR */
+	ctrl_outw(0x00AA, 0xA4050118);	/* PPCR */
+	ctrl_outw(0x0000, 0xA4050124);	/* PSELA */
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_se7721 __initmv = {
+	.mv_name		= "Solution Engine 7721",
+	.mv_setup		= se7721_setup,
+	.mv_nr_irqs		= 109,
+	.mv_init_irq		= init_se7721_IRQ,
+};
diff --git a/arch/sh/boards/se/7722/Makefile b/arch/sh/boards/mach-se/7722/Makefile
index 8694373389e5..8694373389e5 100644
--- a/arch/sh/boards/se/7722/Makefile
+++ b/arch/sh/boards/mach-se/7722/Makefile
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
new file mode 100644
index 000000000000..02d21a3e2a8f
--- /dev/null
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -0,0 +1,76 @@
+/*
+ * linux/arch/sh/boards/se/7722/irq.c
+ *
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7722.h>
+
+static void disable_se7722_irq(unsigned int irq)
+{
+	unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
+	ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
+}
+
+static void enable_se7722_irq(unsigned int irq)
+{
+	unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
+	ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
+}
+
+static struct irq_chip se7722_irq_chip __read_mostly = {
+	.name           = "SE7722-FPGA",
+	.mask           = disable_se7722_irq,
+	.unmask         = enable_se7722_irq,
+	.mask_ack       = disable_se7722_irq,
+};
+
+static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned short intv = ctrl_inw(IRQ01_STS);
+	struct irq_desc *ext_desc;
+	unsigned int ext_irq = SE7722_FPGA_IRQ_BASE;
+
+	intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
+
+	while (intv) {
+		if (intv & 1) {
+			ext_desc = irq_desc + ext_irq;
+			handle_level_irq(ext_irq, ext_desc);
+		}
+		intv >>= 1;
+		ext_irq++;
+	}
+}
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7722_IRQ(void)
+{
+	int i;
+
+	ctrl_outw(0, IRQ01_MASK);       /* disable all irqs */
+	ctrl_outw(0x2000, 0xb03fffec);  /* mrshpc irq enable */
+
+	for (i = 0; i < SE7722_FPGA_IRQ_NR; i++)
+		set_irq_chip_and_handler_name(SE7722_FPGA_IRQ_BASE + i,
+					      &se7722_irq_chip,
+					      handle_level_irq, "level");
+
+	set_irq_chained_handler(IRQ0_IRQ, se7722_irq_demux);
+	set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
+
+	set_irq_chained_handler(IRQ1_IRQ, se7722_irq_demux);
+	set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
+}
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
new file mode 100644
index 000000000000..fe6f96517e12
--- /dev/null
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -0,0 +1,194 @@
+/*
+ * linux/arch/sh/boards/se/7722/setup.c
+ *
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/input.h>
+#include <linux/smc91x.h>
+#include <asm/machvec.h>
+#include <asm/clock.h>
+#include <mach-se/mach/se7722.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+#include <asm/sh_keysc.h>
+
+/* Heartbeat */
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start  = PA_LED,
+		.end    = PA_LED,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources  = ARRAY_SIZE(heartbeat_resources),
+	.resource       = heartbeat_resources,
+};
+
+/* SMC91x */
+static struct smc91x_platdata smc91x_info = {
+	.flags = SMC91X_USE_16BIT,
+};
+
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = SMC_IRQ,
+		.end    = SMC_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+		.platform_data	= &smc91x_info,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start  = PA_MRSHPC_IO + 0x1f0,
+		.end    = PA_MRSHPC_IO + 0x1f0 + 8 ,
+		.flags  = IORESOURCE_IO,
+	},
+	[1] = {
+		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
+		.end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
+		.flags  = IORESOURCE_IO,
+	},
+	[2] = {
+		.start  = MRSHPC_IRQ0,
+		.end    = MRSHPC_IRQ0,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_ide_device  = {
+	.name           = "pata_platform",
+	.id             = -1,
+	.num_resources  = ARRAY_SIZE(cf_ide_resources),
+	.resource       = cf_ide_resources,
+};
+
+static struct sh_keysc_info sh_keysc_info = {
+	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */
+	.scan_timing = 3,
+	.delay = 5,
+	.keycodes = { /* SW1 -> SW30 */
+		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
+		KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
+		KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
+		KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
+		KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y,
+		KEY_Z,
+		KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */
+	},
+};
+
+static struct resource sh_keysc_resources[] = {
+	[0] = {
+		.start  = 0x044b0000,
+		.end    = 0x044b000f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 79,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_keysc_device = {
+	.name           = "sh_keysc",
+	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
+	.resource       = sh_keysc_resources,
+	.dev	= {
+		.platform_data	= &sh_keysc_info,
+	},
+};
+
+static struct platform_device *se7722_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+	&cf_ide_device,
+	&sh_keysc_device,
+};
+
+static int __init se7722_devices_setup(void)
+{
+	clk_always_enable("mstp214"); /* KEYSC */
+
+	return platform_add_devices(se7722_devices,
+		ARRAY_SIZE(se7722_devices));
+}
+device_initcall(se7722_devices_setup);
+
+static void __init se7722_setup(char **cmdline_p)
+{
+	ctrl_outw(0x010D, FPGA_OUT);    /* FPGA */
+
+	ctrl_outw(0x0000, PORT_PECR);   /* PORT E 1 = IRQ5 ,E 0 = BS */
+	ctrl_outw(0x1000, PORT_PJCR);   /* PORT J 1 = IRQ1,J 0 =IRQ0 */
+
+	/* LCDC I/O */
+	ctrl_outw(0x0020, PORT_PSELD);
+
+	/* SIOF1*/
+	ctrl_outw(0x0003, PORT_PSELB);
+	ctrl_outw(0xe000, PORT_PSELC);
+	ctrl_outw(0x0000, PORT_PKCR);
+
+	/* LCDC */
+	ctrl_outw(0x4020, PORT_PHCR);
+	ctrl_outw(0x0000, PORT_PLCR);
+	ctrl_outw(0x0000, PORT_PMCR);
+	ctrl_outw(0x0002, PORT_PRCR);
+	ctrl_outw(0x0000, PORT_PXCR);   /* LCDC,CS6A */
+
+	/* KEYSC */
+	ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
+	ctrl_outw(0x0000, PORT_PYCR);
+	ctrl_outw(0x0000, PORT_PZCR);
+	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
+	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7722 __initmv = {
+	.mv_name                = "Solution Engine 7722" ,
+	.mv_setup               = se7722_setup ,
+	.mv_nr_irqs		= SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_NR,
+	.mv_init_irq		= init_se7722_IRQ,
+};
diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile
index dbc29f3a9de5..dbc29f3a9de5 100644
--- a/arch/sh/boards/se/7751/Makefile
+++ b/arch/sh/boards/mach-se/7751/Makefile
diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c
new file mode 100644
index 000000000000..6287ae570319
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/io.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
+ * Based largely on io_se.c.
+ *
+ * I/O routine for Hitachi 7751 SolutionEngine.
+ *
+ * Initial version only to support LAN access; some
+ * placeholder code from io_se.c left in with the
+ * expectation of later SuperIO and PCMCIA access.
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7751.h>
+#include <asm/addrspace.h>
+
+static inline volatile u16 *port2adr(unsigned int port)
+{
+	if (port >= 0x2000)
+		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
+	maybebadio((unsigned long)port);
+	return (volatile __u16*)port;
+}
+
+/*
+ * General outline: remap really low stuff [eventually] to SuperIO,
+ * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
+ * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
+ * should be way beyond the window, and is used  w/o translation for
+ * compatibility.
+ */
+unsigned char sh7751se_inb(unsigned long port)
+{
+	if (PXSEG(port))
+		return *(volatile unsigned char *)port;
+	else if (is_pci_ioaddr(port))
+		return *(volatile unsigned char *)pci_ioaddr(port);
+	else
+		return (*port2adr(port)) & 0xff;
+}
+
+unsigned char sh7751se_inb_p(unsigned long port)
+{
+	unsigned char v;
+
+        if (PXSEG(port))
+                v = *(volatile unsigned char *)port;
+	else if (is_pci_ioaddr(port))
+                v = *(volatile unsigned char *)pci_ioaddr(port);
+	else
+		v = (*port2adr(port)) & 0xff;
+	ctrl_delay();
+	return v;
+}
+
+unsigned short sh7751se_inw(unsigned long port)
+{
+        if (PXSEG(port))
+                return *(volatile unsigned short *)port;
+	else if (is_pci_ioaddr(port))
+                return *(volatile unsigned short *)pci_ioaddr(port);
+	else if (port >= 0x2000)
+		return *port2adr(port);
+	else
+		maybebadio(port);
+	return 0;
+}
+
+unsigned int sh7751se_inl(unsigned long port)
+{
+        if (PXSEG(port))
+                return *(volatile unsigned long *)port;
+	else if (is_pci_ioaddr(port))
+                return *(volatile unsigned int *)pci_ioaddr(port);
+	else if (port >= 0x2000)
+		return *port2adr(port);
+	else
+		maybebadio(port);
+	return 0;
+}
+
+void sh7751se_outb(unsigned char value, unsigned long port)
+{
+
+        if (PXSEG(port))
+                *(volatile unsigned char *)port = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned char*)pci_ioaddr(port)) = value;
+	else
+		*(port2adr(port)) = value;
+}
+
+void sh7751se_outb_p(unsigned char value, unsigned long port)
+{
+        if (PXSEG(port))
+                *(volatile unsigned char *)port = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned char*)pci_ioaddr(port)) = value;
+	else
+		*(port2adr(port)) = value;
+	ctrl_delay();
+}
+
+void sh7751se_outw(unsigned short value, unsigned long port)
+{
+        if (PXSEG(port))
+                *(volatile unsigned short *)port = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned short *)pci_ioaddr(port)) = value;
+	else if (port >= 0x2000)
+		*port2adr(port) = value;
+	else
+		maybebadio(port);
+}
+
+void sh7751se_outl(unsigned int value, unsigned long port)
+{
+        if (PXSEG(port))
+                *(volatile unsigned long *)port = value;
+	else if (is_pci_ioaddr(port))
+		*((unsigned long*)pci_ioaddr(port)) = value;
+	else
+		maybebadio(port);
+}
+
+void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
+{
+	maybebadio(port);
+}
+
+void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
+{
+	maybebadio(port);
+}
diff --git a/arch/sh/boards/mach-se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c
new file mode 100644
index 000000000000..5c9847ea1e7c
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/irq.c
@@ -0,0 +1,50 @@
+/*
+ * linux/arch/sh/boards/se/7751/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/irq.h>
+#include <mach-se/mach/se7751.h>
+
+static struct ipr_data ipr_irq_table[] = {
+	{ 13, 3, 3, 2 },
+	/* Add additional entries here as drivers are added and tested. */
+};
+
+static unsigned long ipr_offsets[] = {
+	BCR_ILCRA,
+	BCR_ILCRB,
+	BCR_ILCRC,
+	BCR_ILCRD,
+	BCR_ILCRE,
+	BCR_ILCRF,
+	BCR_ILCRG,
+};
+
+static struct ipr_desc ipr_irq_desc = {
+	.ipr_offsets	= ipr_offsets,
+	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
+
+	.ipr_data	= ipr_irq_table,
+	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
+
+	.chip = {
+		.name	= "IPR-se7751",
+	},
+};
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_7751se_IRQ(void)
+{
+	register_ipr_controller(&ipr_irq_desc);
+}
diff --git a/arch/sh/boards/se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c
index 203b2923fe7f..203b2923fe7f 100644
--- a/arch/sh/boards/se/7751/pci.c
+++ b/arch/sh/boards/mach-se/7751/pci.c
diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c
new file mode 100644
index 000000000000..50572512e3e8
--- /dev/null
+++ b/arch/sh/boards/mach-se/7751/setup.c
@@ -0,0 +1,78 @@
+/*
+ * linux/arch/sh/boards/se/7751/setup.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine Support.
+ *
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7751.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct heartbeat_data heartbeat_data = {
+	.bit_pos	= heartbeat_bit_pos,
+	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= &heartbeat_data,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *se7751_devices[] __initdata = {
+	&heartbeat_device,
+};
+
+static int __init se7751_devices_setup(void)
+{
+	return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
+}
+__initcall(se7751_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_7751se __initmv = {
+	.mv_name		= "7751 SolutionEngine",
+	.mv_nr_irqs		= 72,
+
+	.mv_inb			= sh7751se_inb,
+	.mv_inw			= sh7751se_inw,
+	.mv_inl			= sh7751se_inl,
+	.mv_outb		= sh7751se_outb,
+	.mv_outw		= sh7751se_outw,
+	.mv_outl		= sh7751se_outl,
+
+	.mv_inb_p		= sh7751se_inb_p,
+	.mv_inw_p		= sh7751se_inw,
+	.mv_inl_p		= sh7751se_inl,
+	.mv_outb_p		= sh7751se_outb_p,
+	.mv_outw_p		= sh7751se_outw,
+	.mv_outl_p		= sh7751se_outl,
+
+	.mv_insl		= sh7751se_insl,
+	.mv_outsl		= sh7751se_outsl,
+
+	.mv_init_irq		= init_7751se_IRQ,
+};
diff --git a/arch/sh/boards/se/7780/Makefile b/arch/sh/boards/mach-se/7780/Makefile
index 6b88adae3ecc..6b88adae3ecc 100644
--- a/arch/sh/boards/se/7780/Makefile
+++ b/arch/sh/boards/mach-se/7780/Makefile
diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c
new file mode 100644
index 000000000000..66ad292c9fc3
--- /dev/null
+++ b/arch/sh/boards/mach-se/7780/irq.c
@@ -0,0 +1,46 @@
+/*
+ * linux/arch/sh/boards/se/7780/irq.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <mach-se/mach/se7780.h>
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_se7780_IRQ(void)
+{
+	/* enable all interrupt at FPGA */
+	ctrl_outw(0, FPGA_INTMSK1);
+	/* mask SM501 interrupt */
+	ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
+	/* enable all interrupt at FPGA */
+	ctrl_outw(0, FPGA_INTMSK2);
+
+	/* set FPGA INTSEL register */
+	/* FPGA + 0x06 */
+	ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) |
+		(IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
+
+	/* FPGA + 0x08 */
+	ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
+		(IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
+		(IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
+		(IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
+
+	/* FPGA + 0x0A */
+	ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
+
+	plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
+}
diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c
new file mode 100644
index 000000000000..1d3a867e94e3
--- /dev/null
+++ b/arch/sh/boards/mach-se/7780/setup.c
@@ -0,0 +1,124 @@
+/*
+ * linux/arch/sh/boards/se/7780/setup.c
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/machvec.h>
+#include <mach-se/mach/se7780.h>
+#include <asm/io.h>
+#include <asm/heartbeat.h>
+
+/* Heartbeat */
+static struct heartbeat_data heartbeat_data = {
+	.regsize = 16,
+};
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start  = PA_LED,
+		.end    = PA_LED,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name           = "heartbeat",
+	.id             = -1,
+	.dev = {
+		.platform_data = &heartbeat_data,
+	},
+	.num_resources  = ARRAY_SIZE(heartbeat_resources),
+	.resource       = heartbeat_resources,
+};
+
+/* SMC91x */
+static struct resource smc91x_eth_resources[] = {
+	[0] = {
+		.name   = "smc91x-regs" ,
+		.start  = PA_LAN + 0x300,
+		.end    = PA_LAN + 0x300 + 0x10 ,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = SMC_IRQ,
+		.end    = SMC_IRQ,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_eth_device = {
+	.name           = "smc91x",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = NULL,         /* don't use dma */
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
+	.resource       = smc91x_eth_resources,
+};
+
+static struct platform_device *se7780_devices[] __initdata = {
+	&heartbeat_device,
+	&smc91x_eth_device,
+};
+
+static int __init se7780_devices_setup(void)
+{
+	return platform_add_devices(se7780_devices,
+		ARRAY_SIZE(se7780_devices));
+}
+device_initcall(se7780_devices_setup);
+
+#define GPIO_PHCR        0xFFEA000E
+#define GPIO_PMSELR      0xFFEA0080
+#define GPIO_PECR        0xFFEA0008
+
+static void __init se7780_setup(char **cmdline_p)
+{
+	/* "SH-Linux" on LED Display */
+	ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
+	ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
+	ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
+	ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
+	ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
+	ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
+	ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
+	ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
+
+	printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
+
+	/*
+	 * PCI REQ/GNT setting
+	 *   REQ0/GNT0 -> USB
+	 *   REQ1/GNT1 -> PC Card
+	 *   REQ2/GNT2 -> Serial ATA
+	 *   REQ3/GNT3 -> PCI slot
+	 */
+	ctrl_outw(0x0213, FPGA_REQSEL);
+
+	/* GPIO setting */
+	ctrl_outw(0x0000, GPIO_PECR);
+	ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
+	ctrl_outw(0x0c00, GPIO_PMSELR);
+
+	/* iVDR Power ON */
+	ctrl_outw(0x0001, FPGA_IVDRPW);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_se7780 __initmv = {
+	.mv_name                = "Solution Engine 7780" ,
+	.mv_setup               = se7780_setup ,
+	.mv_nr_irqs		= 111 ,
+	.mv_init_irq		= init_se7780_IRQ,
+};
diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile
new file mode 100644
index 000000000000..2de42bae4b4f
--- /dev/null
+++ b/arch/sh/boards/mach-se/Makefile
@@ -0,0 +1,9 @@
+obj-$(CONFIG_SH_7619_SOLUTION_ENGINE)	+= board-se7619.o
+
+obj-$(CONFIG_SH_SOLUTION_ENGINE)	+= 770x/
+obj-$(CONFIG_SH_7206_SOLUTION_ENGINE)	+= 7206/
+obj-$(CONFIG_SH_7722_SOLUTION_ENGINE)	+= 7722/
+obj-$(CONFIG_SH_7751_SOLUTION_ENGINE)	+= 7751/
+obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= 7780/
+obj-$(CONFIG_SH_7343_SOLUTION_ENGINE)	+= 7343/
+obj-$(CONFIG_SH_7721_SOLUTION_ENGINE)	+= 7721/
diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/mach-se/board-se7619.c
index 1d0ef7faa10d..1d0ef7faa10d 100644
--- a/arch/sh/boards/se/7619/setup.c
+++ b/arch/sh/boards/mach-se/board-se7619.c
diff --git a/arch/sh/boards/sh03/Makefile b/arch/sh/boards/mach-sh03/Makefile
index 400306a796ec..400306a796ec 100644
--- a/arch/sh/boards/sh03/Makefile
+++ b/arch/sh/boards/mach-sh03/Makefile
diff --git a/arch/sh/boards/sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c
index 0a9266bb51c5..0a9266bb51c5 100644
--- a/arch/sh/boards/sh03/rtc.c
+++ b/arch/sh/boards/mach-sh03/rtc.c
diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c
new file mode 100644
index 000000000000..5771219be3fd
--- /dev/null
+++ b/arch/sh/boards/mach-sh03/setup.c
@@ -0,0 +1,75 @@
+/*
+ * linux/arch/sh/boards/sh03/setup.c
+ *
+ * Copyright (C) 2004  Interface Co.,Ltd. Saito.K
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/rtc.h>
+#include <mach-sh03/mach/io.h>
+#include <mach-sh03/mach/sh03.h>
+#include <asm/addrspace.h>
+
+static void __init init_sh03_IRQ(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+extern void *cf_io_base;
+
+static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size)
+{
+	if (PXSEG(port))
+		return (void __iomem *)port;
+	/* CompactFlash (IDE) */
+	if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6))
+		return (void __iomem *)((unsigned long)cf_io_base + port);
+
+        return (void __iomem *)(port + PCI_IO_BASE);
+}
+
+/* arch/sh/boards/sh03/rtc.c */
+void sh03_time_init(void);
+
+static void __init sh03_setup(char **cmdline_p)
+{
+	board_time_init = sh03_time_init;
+}
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= 0xa0800000,
+		.end	= 0xa0800000,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *sh03_devices[] __initdata = {
+	&heartbeat_device,
+};
+
+static int __init sh03_devices_setup(void)
+{
+	return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
+}
+__initcall(sh03_devices_setup);
+
+static struct sh_machine_vector mv_sh03 __initmv = {
+	.mv_name		= "Interface (CTP/PCI-SH03)",
+	.mv_setup		= sh03_setup,
+	.mv_nr_irqs		= 48,
+	.mv_ioport_map		= sh03_ioport_map,
+	.mv_init_irq		= init_sh03_IRQ,
+};
diff --git a/arch/sh/boards/mach-sh7763rdp/Makefile b/arch/sh/boards/mach-sh7763rdp/Makefile
new file mode 100644
index 000000000000..f6c0b55516d2
--- /dev/null
+++ b/arch/sh/boards/mach-sh7763rdp/Makefile
@@ -0,0 +1 @@
+obj-y    := setup.o irq.o
diff --git a/arch/sh/boards/mach-sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c
new file mode 100644
index 000000000000..fd850bad2dec
--- /dev/null
+++ b/arch/sh/boards/mach-sh7763rdp/irq.c
@@ -0,0 +1,45 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/irq.c
+ *
+ * Renesas Solutions SH7763RDP Support.
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008  Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/sh7763rdp.h>
+
+#define INTC_BASE		(0xFFD00000)
+#define INTC_INT2PRI7   (INTC_BASE+0x4001C)
+#define INTC_INT2MSKCR	(INTC_BASE+0x4003C)
+#define INTC_INT2MSKCR1	(INTC_BASE+0x400D4)
+
+/*
+ * Initialize IRQ setting
+ */
+void __init init_sh7763rdp_IRQ(void)
+{
+	/* GPIO enabled */
+	ctrl_outl(1 << 25, INTC_INT2MSKCR);
+
+	/* enable GPIO interrupts */
+	ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000,
+		  INTC_INT2PRI7);
+
+	/* USBH enabled */
+	ctrl_outl(1 << 17, INTC_INT2MSKCR1);
+
+	/* GETHER enabled */
+	ctrl_outl(1 << 16, INTC_INT2MSKCR1);
+
+	/* DMAC enabled */
+	ctrl_outl(1 << 8, INTC_INT2MSKCR);
+}
diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c
new file mode 100644
index 000000000000..925f16af7121
--- /dev/null
+++ b/arch/sh/boards/mach-sh7763rdp/setup.c
@@ -0,0 +1,128 @@
+/*
+ * linux/arch/sh/boards/renesas/sh7763rdp/setup.c
+ *
+ * Renesas Solutions sh7763rdp board
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/mtd/physmap.h>
+#include <asm/io.h>
+#include <asm/sh7763rdp.h>
+
+/* NOR Flash */
+static struct mtd_partition sh7763rdp_nor_flash_partitions[] = {
+	{
+		.name = "U-Boot",
+		.offset = 0,
+		.size = (2 * 128 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "Linux-Kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (20 * 128 * 1024),
+	}, {
+		.name = "Root Filesystem",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data sh7763rdp_nor_flash_data = {
+	.width = 2,
+	.parts = sh7763rdp_nor_flash_partitions,
+	.nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions),
+};
+
+static struct resource sh7763rdp_nor_flash_resources[] = {
+	[0] = {
+		.name = "NOR Flash",
+		.start = 0,
+		.end = (64 * 1024 * 1024),
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device sh7763rdp_nor_flash_device = {
+	.name = "physmap-flash",
+	.resource = sh7763rdp_nor_flash_resources,
+	.num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources),
+	.dev = {
+		.platform_data = &sh7763rdp_nor_flash_data,
+	},
+};
+
+static struct platform_device *sh7763rdp_devices[] __initdata = {
+	&sh7763rdp_nor_flash_device,
+};
+
+static int __init sh7763rdp_devices_setup(void)
+{
+	return platform_add_devices(sh7763rdp_devices,
+				    ARRAY_SIZE(sh7763rdp_devices));
+}
+__initcall(sh7763rdp_devices_setup);
+
+static void __init sh7763rdp_setup(char **cmdline_p)
+{
+	/* Board version check */
+	if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1)
+		printk(KERN_INFO "RTE Standard Configuration\n");
+	else
+		printk(KERN_INFO "RTA Standard Configuration\n");
+
+	/* USB pin select bits (clear bit 5-2 to 0) */
+	ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2);
+	/* USBH setup port I controls to other (clear bits 4-9 to 0) */
+	ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR);
+
+	/* Select USB Host controller */
+	ctrl_outw(0x00, USB_USBHSC);
+
+	/* For LCD */
+	/* set PTJ7-1, bits 15-2 of PJCR to 0 */
+	ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR);
+	/* set PTI5, bits 11-10 of PICR to 0 */
+	ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR);
+	ctrl_outw(0, PORT_PKCR);
+	ctrl_outw(0, PORT_PLCR);
+	/* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */
+	ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2);
+	/* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */
+	ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3);
+
+	/* For HAC */
+	/* bit3-0  0100:HAC & SSI1 enable */
+	ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1);
+	/* bit14      1:SSI_HAC_CLK enable */
+	ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4);
+
+	/* SH-Ether */
+	ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1);
+	ctrl_outw(0x0, PORT_PFCR);
+	ctrl_outw(0x0, PORT_PFCR);
+	ctrl_outw(0x0, PORT_PFCR);
+
+	/* MMC */
+	/*selects SCIF and MMC other functions */
+	ctrl_outw(0x0001, PORT_PSEL0);
+	/* MMC clock operates */
+	ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1);
+	ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR);
+	ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR);
+}
+
+static struct sh_machine_vector mv_sh7763rdp __initmv = {
+	.mv_name = "sh7763drp",
+	.mv_setup = sh7763rdp_setup,
+	.mv_nr_irqs = 112,
+	.mv_init_irq = init_sh7763rdp_IRQ,
+};
diff --git a/arch/sh/boards/snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile
index d2d2f4b6a502..d2d2f4b6a502 100644
--- a/arch/sh/boards/snapgear/Makefile
+++ b/arch/sh/boards/mach-snapgear/Makefile
diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c
index 0f4824264557..0f4824264557 100644
--- a/arch/sh/boards/snapgear/io.c
+++ b/arch/sh/boards/mach-snapgear/io.c
diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c
new file mode 100644
index 000000000000..a5e349d3dda2
--- /dev/null
+++ b/arch/sh/boards/mach-snapgear/setup.c
@@ -0,0 +1,95 @@
+/*
+ * linux/arch/sh/boards/snapgear/setup.c
+ *
+ * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
+ * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
+ *
+ * Based on files with the following comments:
+ *
+ *           Copyright (C) 2000  Kazumoto Kojima
+ *
+ *           Modified for 7751 Solution Engine by
+ *           Ian da Silva and Jeremy Siegel, 2001.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <asm/machvec.h>
+#include <asm/snapgear.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <cpu/timer.h>
+
+/*
+ * EraseConfig handling functions
+ */
+
+static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
+{
+	(void)ctrl_inb(0xb8000000);	/* dummy read */
+
+	printk("SnapGear: erase switch interrupt!\n");
+
+	return IRQ_HANDLED;
+}
+
+static int __init eraseconfig_init(void)
+{
+	printk("SnapGear: EraseConfig init\n");
+	/* Setup "EraseConfig" switch on external IRQ 0 */
+	if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
+				"Erase Config", NULL))
+		printk("SnapGear: failed to register IRQ%d for Reset witch\n",
+				IRL0_IRQ);
+	else
+		printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
+				IRL0_IRQ);
+	return(0);
+}
+
+module_init(eraseconfig_init);
+
+/****************************************************************************/
+/*
+ * Initialize IRQ setting
+ *
+ * IRL0 = erase switch
+ * IRL1 = eth0
+ * IRL2 = eth1
+ * IRL3 = crypto
+ */
+
+static void __init init_snapgear_IRQ(void)
+{
+	printk("Setup SnapGear IRQ/IPR ...\n");
+	/* enable individual interrupt mode for externals */
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_snapgear __initmv = {
+	.mv_name		= "SnapGear SecureEdge5410",
+	.mv_nr_irqs		= 72,
+
+	.mv_inb			= snapgear_inb,
+	.mv_inw			= snapgear_inw,
+	.mv_inl			= snapgear_inl,
+	.mv_outb		= snapgear_outb,
+	.mv_outw		= snapgear_outw,
+	.mv_outl		= snapgear_outl,
+
+	.mv_inb_p		= snapgear_inb_p,
+	.mv_inw_p		= snapgear_inw,
+	.mv_inl_p		= snapgear_inl,
+	.mv_outb_p		= snapgear_outb_p,
+	.mv_outw_p		= snapgear_outw,
+	.mv_outl_p		= snapgear_outl,
+
+	.mv_init_irq		= init_snapgear_IRQ,
+};
diff --git a/arch/sh/boards/renesas/systemh/Makefile b/arch/sh/boards/mach-systemh/Makefile
index 2cc6a23d9d39..2cc6a23d9d39 100644
--- a/arch/sh/boards/renesas/systemh/Makefile
+++ b/arch/sh/boards/mach-systemh/Makefile
diff --git a/arch/sh/boards/renesas/systemh/io.c b/arch/sh/boards/mach-systemh/io.c
index 1b767e1a1428..1b767e1a1428 100644
--- a/arch/sh/boards/renesas/systemh/io.c
+++ b/arch/sh/boards/mach-systemh/io.c
diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c
new file mode 100644
index 000000000000..601c9c8cdbec
--- /dev/null
+++ b/arch/sh/boards/mach-systemh/irq.c
@@ -0,0 +1,101 @@
+/*
+ * linux/arch/sh/boards/renesas/systemh/irq.c
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SystemH Support.
+ *
+ * Modified for 7751 SystemH by
+ * Jonathan Short.
+ */
+
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/io.h>
+#include <asm/systemh7751.h>
+#include <asm/smc37c93x.h>
+
+/* address of external interrupt mask register
+ * address must be set prior to use these (maybe in init_XXX_irq())
+ * XXX : is it better to use .config than specifying it in code? */
+static unsigned long *systemh_irq_mask_register = (unsigned long *)0xB3F10004;
+static unsigned long *systemh_irq_request_register = (unsigned long *)0xB3F10000;
+
+/* forward declaration */
+static unsigned int startup_systemh_irq(unsigned int irq);
+static void shutdown_systemh_irq(unsigned int irq);
+static void enable_systemh_irq(unsigned int irq);
+static void disable_systemh_irq(unsigned int irq);
+static void mask_and_ack_systemh(unsigned int);
+static void end_systemh_irq(unsigned int irq);
+
+/* hw_interrupt_type */
+static struct hw_interrupt_type systemh_irq_type = {
+	.typename = " SystemH Register",
+	.startup = startup_systemh_irq,
+	.shutdown = shutdown_systemh_irq,
+	.enable = enable_systemh_irq,
+	.disable = disable_systemh_irq,
+	.ack = mask_and_ack_systemh,
+	.end = end_systemh_irq
+};
+
+static unsigned int startup_systemh_irq(unsigned int irq)
+{
+	enable_systemh_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static void shutdown_systemh_irq(unsigned int irq)
+{
+	disable_systemh_irq(irq);
+}
+
+static void disable_systemh_irq(unsigned int irq)
+{
+	if (systemh_irq_mask_register) {
+		unsigned long val, mask = 0x01 << 1;
+
+		/* Clear the "irq"th bit in the mask and set it in the request */
+		val = ctrl_inl((unsigned long)systemh_irq_mask_register);
+		val &= ~mask;
+		ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
+
+		val = ctrl_inl((unsigned long)systemh_irq_request_register);
+		val |= mask;
+		ctrl_outl(val, (unsigned long)systemh_irq_request_register);
+	}
+}
+
+static void enable_systemh_irq(unsigned int irq)
+{
+	if (systemh_irq_mask_register) {
+		unsigned long val, mask = 0x01 << 1;
+
+		/* Set "irq"th bit in the mask register */
+		val = ctrl_inl((unsigned long)systemh_irq_mask_register);
+		val |= mask;
+		ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
+	}
+}
+
+static void mask_and_ack_systemh(unsigned int irq)
+{
+	disable_systemh_irq(irq);
+}
+
+static void end_systemh_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_systemh_irq(irq);
+}
+
+void make_systemh_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_desc[irq].chip = &systemh_irq_type;
+	disable_systemh_irq(irq);
+}
+
diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c
index ee78af842778..ee78af842778 100644
--- a/arch/sh/boards/renesas/systemh/setup.c
+++ b/arch/sh/boards/mach-systemh/setup.c
diff --git a/arch/sh/boards/titan/Makefile b/arch/sh/boards/mach-titan/Makefile
index 08d753700062..08d753700062 100644
--- a/arch/sh/boards/titan/Makefile
+++ b/arch/sh/boards/mach-titan/Makefile
diff --git a/arch/sh/boards/titan/io.c b/arch/sh/boards/mach-titan/io.c
index 4730c1dd697d..4730c1dd697d 100644
--- a/arch/sh/boards/titan/io.c
+++ b/arch/sh/boards/mach-titan/io.c
diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/mach-titan/setup.c
index 5de3b2ad71af..5de3b2ad71af 100644
--- a/arch/sh/boards/titan/setup.c
+++ b/arch/sh/boards/mach-titan/setup.c
diff --git a/arch/sh/boards/renesas/x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile
index 983e4551fecf..983e4551fecf 100644
--- a/arch/sh/boards/renesas/x3proto/Makefile
+++ b/arch/sh/boards/mach-x3proto/Makefile
diff --git a/arch/sh/boards/renesas/x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c
index b5c673c39337..b5c673c39337 100644
--- a/arch/sh/boards/renesas/x3proto/ilsel.c
+++ b/arch/sh/boards/mach-x3proto/ilsel.c
diff --git a/arch/sh/boards/renesas/x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c
index abc5b6d418fe..abc5b6d418fe 100644
--- a/arch/sh/boards/renesas/x3proto/setup.c
+++ b/arch/sh/boards/mach-x3proto/setup.c
diff --git a/arch/sh/boards/magicpanelr2/Kconfig b/arch/sh/boards/magicpanelr2/Kconfig
deleted file mode 100644
index b0abddc3e84f..000000000000
--- a/arch/sh/boards/magicpanelr2/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-if SH_MAGIC_PANEL_R2
-
-menu "Magic Panel R2 options"
-
-config SH_MAGIC_PANEL_R2_VERSION
-	int SH_MAGIC_PANEL_R2_VERSION
-	default "3"
-	help
-	  Set the version of the Magic Panel R2
-
-endmenu
-
-endif
diff --git a/arch/sh/boards/magicpanelr2/Makefile b/arch/sh/boards/magicpanelr2/Makefile
deleted file mode 100644
index 7a6d586b9072..000000000000
--- a/arch/sh/boards/magicpanelr2/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the Magic Panel specific parts
-#
-
-obj-y	 := setup.o
\ No newline at end of file
diff --git a/arch/sh/boards/renesas/migor/Makefile b/arch/sh/boards/renesas/migor/Makefile
deleted file mode 100644
index 77037567633b..000000000000
--- a/arch/sh/boards/renesas/migor/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y	 := setup.o
diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c
deleted file mode 100644
index 01af44245b57..000000000000
--- a/arch/sh/boards/renesas/migor/setup.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * Renesas System Solutions Asia Pte. Ltd - Migo-R
- *
- * Copyright (C) 2008 Magnus Damm
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/input.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/nand.h>
-#include <linux/i2c.h>
-#include <linux/smc91x.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/sh_keysc.h>
-#include <asm/migor.h>
-
-/* Address     IRQ  Size  Bus  Description
- * 0x00000000       64MB  16   NOR Flash (SP29PL256N)
- * 0x0c000000       64MB  64   SDRAM (2xK4M563233G)
- * 0x10000000  IRQ0       16   Ethernet (SMC91C111)
- * 0x14000000  IRQ4       16   USB 2.0 Host Controller (M66596)
- * 0x18000000       8GB    8   NAND Flash (K9K8G08U0A)
- */
-
-static struct smc91x_platdata smc91x_info = {
-	.flags = SMC91X_USE_16BIT,
-	.irq_flags = IRQF_TRIGGER_HIGH,
-};
-
-static struct resource smc91x_eth_resources[] = {
-	[0] = {
-		.name   = "SMC91C111" ,
-		.start  = 0x10000300,
-		.end    = 0x1000030f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = 32, /* IRQ0 */
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_eth_device = {
-	.name           = "smc91x",
-	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
-	.resource       = smc91x_eth_resources,
-	.dev	= {
-		.platform_data	= &smc91x_info,
-	},
-};
-
-static struct sh_keysc_info sh_keysc_info = {
-	.mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */
-	.scan_timing = 3,
-	.delay = 5,
-	.keycodes = {
-		0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER,
-		0, KEY_F, KEY_C, KEY_D,	KEY_H, KEY_1,
-		0, KEY_2, KEY_3, KEY_4,	KEY_5, KEY_6,
-		0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0,
-		0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD,
-	},
-};
-
-static struct resource sh_keysc_resources[] = {
-	[0] = {
-		.start  = 0x044b0000,
-		.end    = 0x044b000f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = 79,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sh_keysc_device = {
-	.name           = "sh_keysc",
-	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
-	.resource       = sh_keysc_resources,
-	.dev	= {
-		.platform_data	= &sh_keysc_info,
-	},
-};
-
-static struct mtd_partition migor_nor_flash_partitions[] =
-{
-	{
-		.name = "uboot",
-		.offset = 0,
-		.size = (1 * 1024 * 1024),
-		.mask_flags = MTD_WRITEABLE,	/* Read-only */
-	},
-	{
-		.name = "rootfs",
-		.offset = MTDPART_OFS_APPEND,
-		.size = (15 * 1024 * 1024),
-	},
-	{
-		.name = "other",
-		.offset = MTDPART_OFS_APPEND,
-		.size = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct physmap_flash_data migor_nor_flash_data = {
-	.width		= 2,
-	.parts		= migor_nor_flash_partitions,
-	.nr_parts	= ARRAY_SIZE(migor_nor_flash_partitions),
-};
-
-static struct resource migor_nor_flash_resources[] = {
-	[0] = {
-		.name		= "NOR Flash",
-		.start		= 0x00000000,
-		.end		= 0x03ffffff,
-		.flags		= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device migor_nor_flash_device = {
-	.name		= "physmap-flash",
-	.resource	= migor_nor_flash_resources,
-	.num_resources	= ARRAY_SIZE(migor_nor_flash_resources),
-	.dev		= {
-		.platform_data = &migor_nor_flash_data,
-	},
-};
-
-static struct mtd_partition migor_nand_flash_partitions[] = {
-	{
-		.name		= "nanddata1",
-		.offset		= 0x0,
-		.size		= 512 * 1024 * 1024,
-	},
-	{
-		.name		= "nanddata2",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= 512 * 1024 * 1024,
-	},
-};
-
-static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd,
-				     unsigned int ctrl)
-{
-	struct nand_chip *chip = mtd->priv;
-
-	if (cmd == NAND_CMD_NONE)
-		return;
-
-	if (ctrl & NAND_CLE)
-		writeb(cmd, chip->IO_ADDR_W + 0x00400000);
-	else if (ctrl & NAND_ALE)
-		writeb(cmd, chip->IO_ADDR_W + 0x00800000);
-	else
-		writeb(cmd, chip->IO_ADDR_W);
-}
-
-static int migor_nand_flash_ready(struct mtd_info *mtd)
-{
-	return ctrl_inb(PORT_PADR) & 0x02; /* PTA1 */
-}
-
-struct platform_nand_data migor_nand_flash_data = {
-	.chip = {
-		.nr_chips = 1,
-		.partitions = migor_nand_flash_partitions,
-		.nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions),
-		.chip_delay = 20,
-		.part_probe_types = (const char *[]) { "cmdlinepart", NULL },
-	},
-	.ctrl = {
-		.dev_ready = migor_nand_flash_ready,
-		.cmd_ctrl = migor_nand_flash_cmd_ctl,
-	},
-};
-
-static struct resource migor_nand_flash_resources[] = {
-	[0] = {
-		.name		= "NAND Flash",
-		.start		= 0x18000000,
-		.end		= 0x18ffffff,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device migor_nand_flash_device = {
-	.name		= "gen_nand",
-	.resource	= migor_nand_flash_resources,
-	.num_resources	= ARRAY_SIZE(migor_nand_flash_resources),
-	.dev		= {
-		.platform_data = &migor_nand_flash_data,
-	}
-};
-
-static struct platform_device *migor_devices[] __initdata = {
-	&smc91x_eth_device,
-	&sh_keysc_device,
-	&migor_nor_flash_device,
-	&migor_nand_flash_device,
-};
-
-static struct i2c_board_info __initdata migor_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("rs5c372b", 0x32),
-	},
-	{
-		I2C_BOARD_INFO("migor_ts", 0x51),
-		.irq = 38, /* IRQ6 */
-	},
-};
-
-static int __init migor_devices_setup(void)
-{
-	i2c_register_board_info(0, migor_i2c_devices,
-				ARRAY_SIZE(migor_i2c_devices));
- 
-	return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
-}
-__initcall(migor_devices_setup);
-
-static void __init migor_setup(char **cmdline_p)
-{
-	/* SMC91C111 - Enable IRQ0 */
-	ctrl_outw(ctrl_inw(PORT_PJCR) & ~0x0003, PORT_PJCR);
-
-	/* KEYSC */
-	ctrl_outw(ctrl_inw(PORT_PYCR) & ~0x0fff, PORT_PYCR);
-	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0x0ff0, PORT_PZCR);
-	ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA);
-	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
-	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
-	ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2);
-
-	/* NAND Flash */
-	ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR);
-	ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200,
-		  BSC_CS6ABCR);
-
-	/* I2C */
-	ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1);
-
-	/* Touch Panel - Enable IRQ6 */
-	ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR);
-	ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA);
-	ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC);
-}
-
-static struct sh_machine_vector mv_migor __initmv = {
-	.mv_name		= "Migo-R",
-	.mv_setup		= migor_setup,
-};
diff --git a/arch/sh/boards/renesas/r7780rp/psw.c b/arch/sh/boards/renesas/r7780rp/psw.c
deleted file mode 100644
index c844dfa5d58d..000000000000
--- a/arch/sh/boards/renesas/r7780rp/psw.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * arch/sh/boards/renesas/r7780rp/psw.c
- *
- * push switch support for RDBRP-1/RDBREVRP-1 debug boards.
- *
- * Copyright (C) 2006  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/io.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <asm/mach/r7780rp.h>
-#include <asm/push-switch.h>
-
-static irqreturn_t psw_irq_handler(int irq, void *arg)
-{
-	struct platform_device *pdev = arg;
-	struct push_switch *psw = platform_get_drvdata(pdev);
-	struct push_switch_platform_info *psw_info = pdev->dev.platform_data;
-	unsigned int l, mask;
-	int ret = 0;
-
-	l = ctrl_inw(PA_DBSW);
-
-	/* Nothing to do if there's no state change */
-	if (psw->state) {
-		ret = 1;
-		goto out;
-	}
-
-	mask = l & 0x70;
-	/* Figure out who raised it */
-	if (mask & (1 << psw_info->bit)) {
-		psw->state = !!(mask & (1 << psw_info->bit));
-		if (psw->state)	/* debounce */
-			mod_timer(&psw->debounce, jiffies + 50);
-
-		ret = 1;
-	}
-
-out:
-	/* Clear the switch IRQs */
-	l |= (0x7 << 12);
-	ctrl_outw(l, PA_DBSW);
-
-	return IRQ_RETVAL(ret);
-}
-
-static struct resource psw_resources[] = {
-	[0] = {
-		.start	= IRQ_PSW,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct push_switch_platform_info s2_platform_data = {
-	.name		= "s2",
-	.bit		= 6,
-	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
-			  IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct platform_device s2_switch_device = {
-	.name		= "push-switch",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(psw_resources),
-	.resource	= psw_resources,
-	.dev		= {
-		.platform_data = &s2_platform_data,
-	},
-};
-
-static struct push_switch_platform_info s3_platform_data = {
-	.name		= "s3",
-	.bit		= 5,
-	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
-			  IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct platform_device s3_switch_device = {
-	.name		= "push-switch",
-	.id		= 1,
-	.num_resources	= ARRAY_SIZE(psw_resources),
-	.resource	= psw_resources,
-	.dev		= {
-		.platform_data = &s3_platform_data,
-	},
-};
-
-static struct push_switch_platform_info s4_platform_data = {
-	.name		= "s4",
-	.bit		= 4,
-	.irq_flags	= IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
-			  IRQF_SHARED,
-	.irq_handler	= psw_irq_handler,
-};
-
-static struct platform_device s4_switch_device = {
-	.name		= "push-switch",
-	.id		= 2,
-	.num_resources	= ARRAY_SIZE(psw_resources),
-	.resource	= psw_resources,
-	.dev		= {
-		.platform_data = &s4_platform_data,
-	},
-};
-
-static struct platform_device *psw_devices[] = {
-	&s2_switch_device, &s3_switch_device, &s4_switch_device,
-};
-
-static int __init psw_init(void)
-{
-	return platform_add_devices(psw_devices, ARRAY_SIZE(psw_devices));
-}
-module_init(psw_init);
diff --git a/arch/sh/boards/renesas/systemh/irq.c b/arch/sh/boards/renesas/systemh/irq.c
deleted file mode 100644
index 0ba2fe674c47..000000000000
--- a/arch/sh/boards/renesas/systemh/irq.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * linux/arch/sh/boards/renesas/systemh/irq.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SystemH Support.
- *
- * Modified for 7751 SystemH by
- * Jonathan Short.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <asm/io.h>
-#include <asm/systemh7751.h>
-#include <asm/smc37c93x.h>
-
-/* address of external interrupt mask register
- * address must be set prior to use these (maybe in init_XXX_irq())
- * XXX : is it better to use .config than specifying it in code? */
-static unsigned long *systemh_irq_mask_register = (unsigned long *)0xB3F10004;
-static unsigned long *systemh_irq_request_register = (unsigned long *)0xB3F10000;
-
-/* forward declaration */
-static unsigned int startup_systemh_irq(unsigned int irq);
-static void shutdown_systemh_irq(unsigned int irq);
-static void enable_systemh_irq(unsigned int irq);
-static void disable_systemh_irq(unsigned int irq);
-static void mask_and_ack_systemh(unsigned int);
-static void end_systemh_irq(unsigned int irq);
-
-/* hw_interrupt_type */
-static struct hw_interrupt_type systemh_irq_type = {
-	.typename = " SystemH Register",
-	.startup = startup_systemh_irq,
-	.shutdown = shutdown_systemh_irq,
-	.enable = enable_systemh_irq,
-	.disable = disable_systemh_irq,
-	.ack = mask_and_ack_systemh,
-	.end = end_systemh_irq
-};
-
-static unsigned int startup_systemh_irq(unsigned int irq)
-{
-	enable_systemh_irq(irq);
-	return 0; /* never anything pending */
-}
-
-static void shutdown_systemh_irq(unsigned int irq)
-{
-	disable_systemh_irq(irq);
-}
-
-static void disable_systemh_irq(unsigned int irq)
-{
-	if (systemh_irq_mask_register) {
-		unsigned long val, mask = 0x01 << 1;
-
-		/* Clear the "irq"th bit in the mask and set it in the request */
-		val = ctrl_inl((unsigned long)systemh_irq_mask_register);
-		val &= ~mask;
-		ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
-
-		val = ctrl_inl((unsigned long)systemh_irq_request_register);
-		val |= mask;
-		ctrl_outl(val, (unsigned long)systemh_irq_request_register);
-	}
-}
-
-static void enable_systemh_irq(unsigned int irq)
-{
-	if (systemh_irq_mask_register) {
-		unsigned long val, mask = 0x01 << 1;
-
-		/* Set "irq"th bit in the mask register */
-		val = ctrl_inl((unsigned long)systemh_irq_mask_register);
-		val |= mask;
-		ctrl_outl(val, (unsigned long)systemh_irq_mask_register);
-	}
-}
-
-static void mask_and_ack_systemh(unsigned int irq)
-{
-	disable_systemh_irq(irq);
-}
-
-static void end_systemh_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_systemh_irq(irq);
-}
-
-void make_systemh_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &systemh_irq_type;
-	disable_systemh_irq(irq);
-}
-
diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/se/7206/io.c
deleted file mode 100644
index 1308e618e044..000000000000
--- a/arch/sh/boards/se/7206/io.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $
- *
- * linux/arch/sh/boards/se/7206/io.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * I/O routine for Hitachi 7206 SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/se7206.h>
-
-
-static inline void delay(void)
-{
-	ctrl_inw(0x20000000);  /* P2 ROM Area */
-}
-
-/* MS7750 requires special versions of in*, out* routines, since
-   PC-like io ports are located at upper half byte of 16-bit word which
-   can be accessed only with 16-bit wide.  */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-	if (port >= 0x2000 && port < 0x2020)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	else if (port >= 0x300 && port < 0x310)
-		return (volatile __u16 *) (PA_SMSC + (port - 0x300));
-
-	return (volatile __u16 *)port;
-}
-
-unsigned char se7206_inb(unsigned long port)
-{
-	return (*port2adr(port)) & 0xff;
-}
-
-unsigned char se7206_inb_p(unsigned long port)
-{
-	unsigned long v;
-
-	v = (*port2adr(port)) & 0xff;
-	delay();
-	return v;
-}
-
-unsigned short se7206_inw(unsigned long port)
-{
-	return *port2adr(port);;
-}
-
-void se7206_outb(unsigned char value, unsigned long port)
-{
-	*(port2adr(port)) = value;
-}
-
-void se7206_outb_p(unsigned char value, unsigned long port)
-{
-	*(port2adr(port)) = value;
-	delay();
-}
-
-void se7206_outw(unsigned short value, unsigned long port)
-{
-	*port2adr(port) = value;
-}
-
-void se7206_insb(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u8 *ap = addr;
-
-	while (count--)
-		*ap++ = *p;
-}
-
-void se7206_insw(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u16 *ap = addr;
-	while (count--)
-		*ap++ = *p;
-}
-
-void se7206_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u8 *ap = addr;
-
-	while (count--)
-		*p = *ap++;
-}
-
-void se7206_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u16 *ap = addr;
-	while (count--)
-		*p = *ap++;
-}
diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/se/7206/irq.c
deleted file mode 100644
index 9d5bfc77d0de..000000000000
--- a/arch/sh/boards/se/7206/irq.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7206/irq.c
- *
- * Copyright (C) 2005,2006 Yoshinori Sato
- *
- * Hitachi SolutionEngine Support.
- *
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <asm/se7206.h>
-
-#define INTSTS0 0x31800000
-#define INTSTS1 0x31800002
-#define INTMSK0 0x31800004
-#define INTMSK1 0x31800006
-#define INTSEL  0x31800008
-
-#define IRQ0_IRQ 64
-#define IRQ1_IRQ 65
-#define IRQ3_IRQ 67
-
-#define INTC_IPR01 0xfffe0818
-#define INTC_ICR1  0xfffe0802
-
-static void disable_se7206_irq(unsigned int irq)
-{
-	unsigned short val;
-	unsigned short mask = 0xffff ^ (0x0f << 4 * (3 - (IRQ0_IRQ - irq)));
-	unsigned short msk0,msk1;
-
-	/* Set the priority in IPR to 0 */
-	val = ctrl_inw(INTC_IPR01);
-	val &= mask;
-	ctrl_outw(val, INTC_IPR01);
-	/* FPGA mask set */
-	msk0 = ctrl_inw(INTMSK0);
-	msk1 = ctrl_inw(INTMSK1);
-
-	switch (irq) {
-	case IRQ0_IRQ:
-		msk0 |= 0x0010;
-		break;
-	case IRQ1_IRQ:
-		msk0 |= 0x000f;
-		break;
-	case IRQ3_IRQ:
-		msk0 |= 0x0f00;
-		msk1 |= 0x00ff;
-		break;
-	}
-	ctrl_outw(msk0, INTMSK0);
-	ctrl_outw(msk1, INTMSK1);
-}
-
-static void enable_se7206_irq(unsigned int irq)
-{
-	unsigned short val;
-	unsigned short value = (0x0001 << 4 * (3 - (IRQ0_IRQ - irq)));
-	unsigned short msk0,msk1;
-
-	/* Set priority in IPR back to original value */
-	val = ctrl_inw(INTC_IPR01);
-	val |= value;
-	ctrl_outw(val, INTC_IPR01);
-
-	/* FPGA mask reset */
-	msk0 = ctrl_inw(INTMSK0);
-	msk1 = ctrl_inw(INTMSK1);
-
-	switch (irq) {
-	case IRQ0_IRQ:
-		msk0 &= ~0x0010;
-		break;
-	case IRQ1_IRQ:
-		msk0 &= ~0x000f;
-		break;
-	case IRQ3_IRQ:
-		msk0 &= ~0x0f00;
-		msk1 &= ~0x00ff;
-		break;
-	}
-	ctrl_outw(msk0, INTMSK0);
-	ctrl_outw(msk1, INTMSK1);
-}
-
-static void eoi_se7206_irq(unsigned int irq)
-{
-	unsigned short sts0,sts1;
-
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_se7206_irq(irq);
-	/* FPGA isr clear */
-	sts0 = ctrl_inw(INTSTS0);
-	sts1 = ctrl_inw(INTSTS1);
-
-	switch (irq) {
-	case IRQ0_IRQ:
-		sts0 &= ~0x0010;
-		break;
-	case IRQ1_IRQ:
-		sts0 &= ~0x000f;
-		break;
-	case IRQ3_IRQ:
-		sts0 &= ~0x0f00;
-		sts1 &= ~0x00ff;
-		break;
-	}
-	ctrl_outw(sts0, INTSTS0);
-	ctrl_outw(sts1, INTSTS1);
-}
-
-static struct irq_chip se7206_irq_chip __read_mostly = {
-	.name		= "SE7206-FPGA",
-	.mask		= disable_se7206_irq,
-	.unmask		= enable_se7206_irq,
-	.mask_ack	= disable_se7206_irq,
-	.eoi		= eoi_se7206_irq,
-};
-
-static void make_se7206_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	set_irq_chip_and_handler_name(irq, &se7206_irq_chip,
-				      handle_level_irq, "level");
-	disable_se7206_irq(irq);
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7206_IRQ(void)
-{
-	make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */
-	make_se7206_irq(IRQ1_IRQ); /* ATA */
-	make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */
-	ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */
-
-	/* FPGA System register setup*/
-	ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */
-	ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */
-	/* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */
-	ctrl_outw(0x0001,INTSEL);
-}
diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/se/7206/setup.c
deleted file mode 100644
index 4fe84cc08406..000000000000
--- a/arch/sh/boards/se/7206/setup.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- *
- * linux/arch/sh/boards/se/7206/setup.c
- *
- * Copyright (C) 2006  Yoshinori Sato
- * Copyright (C) 2007 - 2008  Paul Mundt
- *
- * Hitachi 7206 SolutionEngine Support.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/smc91x.h>
-#include <asm/se7206.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-#include <asm/heartbeat.h>
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.name		= "smc91x-regs",
-		.start		= PA_SMSC + 0x300,
-		.end		= PA_SMSC + 0x300 + 0x020 - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= 64,
-		.end		= 64,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smc91x_platdata smc91x_info = {
-	.flags	= SMC91X_USE_16BIT,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.dev		= {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &smc91x_info,
-	},
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
-	.bit_pos	= heartbeat_bit_pos,
-	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
-	.regsize	= 32,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= &heartbeat_data,
-	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *se7206_devices[] __initdata = {
-	&smc91x_device,
-	&heartbeat_device,
-};
-
-static int __init se7206_devices_setup(void)
-{
-	return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
-}
-__initcall(se7206_devices_setup);
-
-/*
- * The Machine Vector
- */
-
-static struct sh_machine_vector mv_se __initmv = {
-	.mv_name		= "SolutionEngine",
-	.mv_nr_irqs		= 256,
-	.mv_inb			= se7206_inb,
-	.mv_inw			= se7206_inw,
-	.mv_outb		= se7206_outb,
-	.mv_outw		= se7206_outw,
-
-	.mv_inb_p		= se7206_inb_p,
-	.mv_inw_p		= se7206_inw,
-	.mv_outb_p		= se7206_outb_p,
-	.mv_outw_p		= se7206_outw,
-
-	.mv_insb		= se7206_insb,
-	.mv_insw		= se7206_insw,
-	.mv_outsb		= se7206_outsb,
-	.mv_outsw		= se7206_outsw,
-
-	.mv_init_irq		= init_se7206_IRQ,
-};
diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/se/7343/io.c
deleted file mode 100644
index 3a6d11424938..000000000000
--- a/arch/sh/boards/se/7343/io.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * arch/sh/boards/se/7343/io.c
- *
- * I/O routine for SH-Mobile3AS 7343 SolutionEngine.
- *
- */
-#include <linux/kernel.h>
-#include <asm/io.h>
-#include <asm/mach/se7343.h>
-
-#define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a)
-
-struct iop {
-	unsigned long start, end;
-	unsigned long base;
-	struct iop *(*check) (struct iop * p, unsigned long port);
-	unsigned char (*inb) (struct iop * p, unsigned long port);
-	unsigned short (*inw) (struct iop * p, unsigned long port);
-	void (*outb) (struct iop * p, unsigned char value, unsigned long port);
-	void (*outw) (struct iop * p, unsigned short value, unsigned long port);
-};
-
-struct iop *
-simple_check(struct iop *p, unsigned long port)
-{
-	static int count;
-
-	if (count < 100)
-		count++;
-
-	port &= 0xFFFF;
-
-	if ((p->start <= port) && (port <= p->end))
-		return p;
-	else
-		badio(check, port);
-}
-
-struct iop *
-ide_check(struct iop *p, unsigned long port)
-{
-	if (((0x1f0 <= port) && (port <= 0x1f7)) || (port == 0x3f7))
-		return p;
-	return NULL;
-}
-
-unsigned char
-simple_inb(struct iop *p, unsigned long port)
-{
-	return *(unsigned char *) (p->base + port);
-}
-
-unsigned short
-simple_inw(struct iop *p, unsigned long port)
-{
-	return *(unsigned short *) (p->base + port);
-}
-
-void
-simple_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	*(unsigned char *) (p->base + port) = value;
-}
-
-void
-simple_outw(struct iop *p, unsigned short value, unsigned long port)
-{
-	*(unsigned short *) (p->base + port) = value;
-}
-
-unsigned char
-pcc_inb(struct iop *p, unsigned long port)
-{
-	unsigned long addr = p->base + port + 0x40000;
-	unsigned long v;
-
-	if (port & 1)
-		addr += 0x00400000;
-	v = *(volatile unsigned char *) addr;
-	return v;
-}
-
-void
-pcc_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	unsigned long addr = p->base + port + 0x40000;
-
-	if (port & 1)
-		addr += 0x00400000;
-	*(volatile unsigned char *) addr = value;
-}
-
-unsigned char
-bad_inb(struct iop *p, unsigned long port)
-{
-	badio(inb, port);
-}
-
-void
-bad_outb(struct iop *p, unsigned char value, unsigned long port)
-{
-	badio(inw, port);
-}
-
-#ifdef CONFIG_SMC91X
-/* MSTLANEX01 LAN at 0xb400:0000 */
-static struct iop laniop = {
-	.start = 0x00,
-	.end = 0x0F,
-	.base = 0x04000000,
-	.check = simple_check,
-	.inb = simple_inb,
-	.inw = simple_inw,
-	.outb = simple_outb,
-	.outw = simple_outw,
-};
-#endif
-
-#ifdef CONFIG_NE2000
-/* NE2000 pc card NIC */
-static struct iop neiop = {
-	.start = 0x280,
-	.end = 0x29f,
-	.base = 0xb0600000 + 0x80,	/* soft 0x280 -> hard 0x300 */
-	.check = simple_check,
-	.inb = pcc_inb,
-	.inw = simple_inw,
-	.outb = pcc_outb,
-	.outw = simple_outw,
-};
-#endif
-
-#ifdef CONFIG_IDE
-/* CF in CF slot */
-static struct iop cfiop = {
-	.base = 0xb0600000,
-	.check = ide_check,
-	.inb = pcc_inb,
-	.inw = simple_inw,
-	.outb = pcc_outb,
-	.outw = simple_outw,
-};
-#endif
-
-static __inline__ struct iop *
-port2iop(unsigned long port)
-{
-	if (0) ;
-#if defined(CONFIG_SMC91X)
-	else if (laniop.check(&laniop, port))
-		return &laniop;
-#endif
-#if defined(CONFIG_NE2000)
-	else if (neiop.check(&neiop, port))
-		return &neiop;
-#endif
-#if defined(CONFIG_IDE)
-	else if (cfiop.check(&cfiop, port))
-		return &cfiop;
-#endif
-	else
-		return NULL;
-}
-
-static inline void
-delay(void)
-{
-	ctrl_inw(0xac000000);
-	ctrl_inw(0xac000000);
-}
-
-unsigned char
-sh7343se_inb(unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	return (p->inb) (p, port);
-}
-
-unsigned char
-sh7343se_inb_p(unsigned long port)
-{
-	unsigned char v = sh7343se_inb(port);
-	delay();
-	return v;
-}
-
-unsigned short
-sh7343se_inw(unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	return (p->inw) (p, port);
-}
-
-unsigned int
-sh7343se_inl(unsigned long port)
-{
-	badio(inl, port);
-}
-
-void
-sh7343se_outb(unsigned char value, unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	(p->outb) (p, value, port);
-}
-
-void
-sh7343se_outb_p(unsigned char value, unsigned long port)
-{
-	sh7343se_outb(value, port);
-	delay();
-}
-
-void
-sh7343se_outw(unsigned short value, unsigned long port)
-{
-	struct iop *p = port2iop(port);
-	(p->outw) (p, value, port);
-}
-
-void
-sh7343se_outl(unsigned int value, unsigned long port)
-{
-	badio(outl, port);
-}
-
-void
-sh7343se_insb(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned char *a = addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		*a++ = (p->inb) (p, port);
-}
-
-void
-sh7343se_insw(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned short *a = addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		*a++ = (p->inw) (p, port);
-}
-
-void
-sh7343se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	badio(insl, port);
-}
-
-void
-sh7343se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned char *a = (unsigned char *) addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		(p->outb) (p, *a++, port);
-}
-
-void
-sh7343se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned short *a = (unsigned short *) addr;
-	struct iop *p = port2iop(port);
-	while (count--)
-		(p->outw) (p, *a++, port);
-}
-
-void
-sh7343se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	badio(outsw, port);
-}
diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c
deleted file mode 100644
index 763f6deba814..000000000000
--- a/arch/sh/boards/se/7343/irq.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * arch/sh/boards/se/7343/irq.c
- *
- */
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/mach/se7343.h>
-
-static void
-disable_intreq_irq(unsigned int irq)
-{
-	int bit = irq - OFFCHIP_IRQ_BASE;
-	u16 val;
-
-	val = ctrl_inw(PA_CPLD_IMSK);
-	val |= 1 << bit;
-	ctrl_outw(val, PA_CPLD_IMSK);
-}
-
-static void
-enable_intreq_irq(unsigned int irq)
-{
-	int bit = irq - OFFCHIP_IRQ_BASE;
-	u16 val;
-
-	val = ctrl_inw(PA_CPLD_IMSK);
-	val &= ~(1 << bit);
-	ctrl_outw(val, PA_CPLD_IMSK);
-}
-
-static void
-mask_and_ack_intreq_irq(unsigned int irq)
-{
-	disable_intreq_irq(irq);
-}
-
-static unsigned int
-startup_intreq_irq(unsigned int irq)
-{
-	enable_intreq_irq(irq);
-	return 0;
-}
-
-static void
-shutdown_intreq_irq(unsigned int irq)
-{
-	disable_intreq_irq(irq);
-}
-
-static void
-end_intreq_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
-		enable_intreq_irq(irq);
-}
-
-static struct hw_interrupt_type intreq_irq_type = {
-	.typename = "FPGA-IRQ",
-	.startup = startup_intreq_irq,
-	.shutdown = shutdown_intreq_irq,
-	.enable = enable_intreq_irq,
-	.disable = disable_intreq_irq,
-	.ack = mask_and_ack_intreq_irq,
-	.end = end_intreq_irq
-};
-
-static void
-make_intreq_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &intreq_irq_type;
-	disable_intreq_irq(irq);
-}
-
-int
-shmse_irq_demux(int irq)
-{
-	int bit;
-	volatile u16 val;
-
-	if (irq == IRQ5_IRQ) {
-		/* Read status Register */
-		val = ctrl_inw(PA_CPLD_ST);
-		bit = ffs(val);
-		if (bit != 0)
-			return OFFCHIP_IRQ_BASE + bit - 1;
-	}
-	return irq;
-}
-
-/* IRQ5 is multiplexed between the following sources:
- * 1. PC Card socket
- * 2. Extension slot
- * 3. USB Controller
- * 4. Serial Controller
- *
- * We configure IRQ5 as a cascade IRQ.
- */
-static struct irqaction irq5 = {
-	.handler = no_action,
-	.mask = CPU_MASK_NONE,
-	.name = "IRQ5-cascade",
-};
-
-static struct ipr_data se7343_irq5_ipr_map[] = {
-	{ IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY },
-};
-static struct ipr_data se7343_siof0_vpu_ipr_map[] = {
-	{ SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-	{ VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 },
-};
-static struct ipr_data se7343_other_ipr_map[] = {
-	{ DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-	{ DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
-
-	/* I2C block */
-	{ IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-	{ IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
-
-	{ IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-	{ IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-	{ IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-	{ IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
-
-	/* SIOF */
-	{ SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
-
-	/* SIU */
-	{ SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY },
-
-	/* VIO interrupt */
-	{ CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-	{ BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-	{ VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-
-	/*MFI interrupt*/
-
-	{ MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY },
-
-	/* LCD controller */
-	{ LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY },
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init
-init_7343se_IRQ(void)
-{
-	/* Setup Multiplexed interrupts */
-	ctrl_outw(8, PA_CPLD_MODESET);	/* Set all CPLD interrupts to active
-					 * low.
-					 */
-	/* Mask all CPLD controller interrupts */
-	ctrl_outw(0x0fff, PA_CPLD_IMSK);
-
-	/* PC Card interrupts */
-	make_intreq_irq(PC_IRQ0);
-	make_intreq_irq(PC_IRQ1);
-	make_intreq_irq(PC_IRQ2);
-	make_intreq_irq(PC_IRQ3);
-
-	/* Extension Slot Interrupts */
-	make_intreq_irq(EXT_IRQ0);
-	make_intreq_irq(EXT_IRQ1);
-	make_intreq_irq(EXT_IRQ2);
-	make_intreq_irq(EXT_IRQ3);
-
-	/* USB Controller interrupts */
-	make_intreq_irq(USB_IRQ0);
-	make_intreq_irq(USB_IRQ1);
-
-	/* Serial Controller interrupts */
-	make_intreq_irq(UART_IRQ0);
-	make_intreq_irq(UART_IRQ1);
-
-	/* Setup all external interrupts to be active low */
-	ctrl_outw(0xaaaa, INTC_ICR1);
-
-	make_ipr_irq(se7343_irq5_ipr_map, ARRAY_SIZE(se7343_irq5_ipr_map));
-
-	setup_irq(IRQ5_IRQ, &irq5);
-	/* Set port control to use IRQ5 */
-	*(u16 *)0xA4050108 &= ~0xc;
-
-	make_ipr_irq(se7343_siof0_vpu_ipr_map, ARRAY_SIZE(se7343_siof0_vpu_ipr_map));
-
-	ctrl_outb(0x0f, INTC_IMCR5);	/* enable SCIF IRQ */
-
-	make_ipr_irq(se7343_other_ipr_map, ARRAY_SIZE(se7343_other_ipr_map));
-
-	ctrl_outw(0x2000, PA_MRSHPC + 0x0c);	/* mrshpc irq enable */
-}
diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/se/7343/setup.c
deleted file mode 100644
index c9431b3a051b..000000000000
--- a/arch/sh/boards/se/7343/setup.c
+++ /dev/null
@@ -1,94 +0,0 @@
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/mach/se7343.h>
-#include <asm/irq.h>
-
-void init_7343se_IRQ(void);
-
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start	= 0x10000000,
-		.end	= 0x1000000F,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		/*
-		 * shared with other devices via externel
-		 * interrupt controller in FPGA...
-		 */
-		.start	= EXT_IRQ2,
-		.end	= EXT_IRQ2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *sh7343se_platform_devices[] __initdata = {
-	&smc91x_device,
-	&heartbeat_device,
-};
-
-static int __init sh7343se_devices_setup(void)
-{
-	return platform_add_devices(sh7343se_platform_devices,
-				    ARRAY_SIZE(sh7343se_platform_devices));
-}
-
-static void __init sh7343se_setup(char **cmdline_p)
-{
-	device_initcall(sh7343se_devices_setup);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_7343se __initmv = {
-	.mv_name = "SolutionEngine 7343",
-	.mv_setup = sh7343se_setup,
-	.mv_nr_irqs = 108,
-	.mv_inb = sh7343se_inb,
-	.mv_inw = sh7343se_inw,
-	.mv_inl = sh7343se_inl,
-	.mv_outb = sh7343se_outb,
-	.mv_outw = sh7343se_outw,
-	.mv_outl = sh7343se_outl,
-
-	.mv_inb_p = sh7343se_inb_p,
-	.mv_inw_p = sh7343se_inw,
-	.mv_inl_p = sh7343se_inl,
-	.mv_outb_p = sh7343se_outb_p,
-	.mv_outw_p = sh7343se_outw,
-	.mv_outl_p = sh7343se_outl,
-
-	.mv_insb = sh7343se_insb,
-	.mv_insw = sh7343se_insw,
-	.mv_insl = sh7343se_insl,
-	.mv_outsb = sh7343se_outsb,
-	.mv_outsw = sh7343se_outsw,
-	.mv_outsl = sh7343se_outsl,
-
-	.mv_init_irq = init_7343se_IRQ,
-	.mv_irq_demux = shmse_irq_demux,
-};
diff --git a/arch/sh/boards/se/7619/Makefile b/arch/sh/boards/se/7619/Makefile
deleted file mode 100644
index d21775c28cda..000000000000
--- a/arch/sh/boards/se/7619/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the 7619 SolutionEngine specific parts of the kernel
-#
-
-obj-y	 := setup.o
diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/se/770x/io.c
deleted file mode 100644
index c4550473d4c3..000000000000
--- a/arch/sh/boards/se/770x/io.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $
- *
- * linux/arch/sh/kernel/io_se.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * I/O routine for Hitachi SolutionEngine.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/se.h>
-
-/* SH pcmcia io window base, start and end.  */
-int sh_pcic_io_wbase = 0xb8400000;
-int sh_pcic_io_start;
-int sh_pcic_io_stop;
-int sh_pcic_io_type;
-int sh_pcic_io_dummy;
-
-/* MS7750 requires special versions of in*, out* routines, since
-   PC-like io ports are located at upper half byte of 16-bit word which
-   can be accessed only with 16-bit wide.  */
-
-static inline volatile __u16 *
-port2adr(unsigned int port)
-{
-	if (port & 0xff000000)
-		return ( volatile __u16 *) port;
-	if (port >= 0x2000)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	else if (port >= 0x1000)
-		return (volatile __u16 *) (PA_83902 + (port << 1));
-	else if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		return (volatile __u16 *) (sh_pcic_io_wbase + (port &~ 1));
-	else
-		return (volatile __u16 *) (PA_SUPERIO + (port << 1));
-}
-
-static inline int
-shifted_port(unsigned long port)
-{
-	/* For IDE registers, value is not shifted */
-	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
-		return 0;
-	else
-		return 1;
-}
-
-unsigned char se_inb(unsigned long port)
-{
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		return *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-	else if (shifted_port(port))
-		return (*port2adr(port) >> 8); 
-	else
-		return (*port2adr(port))&0xff; 
-}
-
-unsigned char se_inb_p(unsigned long port)
-{
-	unsigned long v;
-
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		v = *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-	else if (shifted_port(port))
-		v = (*port2adr(port) >> 8); 
-	else
-		v = (*port2adr(port))&0xff; 
-	ctrl_delay();
-	return v;
-}
-
-unsigned short se_inw(unsigned long port)
-{
-	if (port >= 0x2000 ||
-	    (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-unsigned int se_inl(unsigned long port)
-{
-	maybebadio(port);
-	return 0;
-}
-
-void se_outb(unsigned char value, unsigned long port)
-{
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		*(__u8 *)(sh_pcic_io_wbase + port) = value; 
-	else if (shifted_port(port))
-		*(port2adr(port)) = value << 8;
-	else
-		*(port2adr(port)) = value;
-}
-
-void se_outb_p(unsigned char value, unsigned long port)
-{
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)
-		*(__u8 *)(sh_pcic_io_wbase + port) = value; 
-	else if (shifted_port(port))
-		*(port2adr(port)) = value << 8;
-	else
-		*(port2adr(port)) = value;
-	ctrl_delay();
-}
-
-void se_outw(unsigned short value, unsigned long port)
-{
-	if (port >= 0x2000 ||
-	    (sh_pcic_io_start <= port && port <= sh_pcic_io_stop))
-		*port2adr(port) = value;
-	else
-		maybebadio(port);
-}
-
-void se_outl(unsigned int value, unsigned long port)
-{
-	maybebadio(port);
-}
-
-void se_insb(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u8 *ap = addr;
-
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
-		volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + 0x40000 + port); 
-		while (count--)
-			*ap++ = *bp;
-	} else if (shifted_port(port)) {
-		while (count--)
-			*ap++ = *p >> 8;
-	} else {
-		while (count--)
-			*ap++ = *p;
-	}
-}
-
-void se_insw(unsigned long port, void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	__u16 *ap = addr;
-	while (count--)
-		*ap++ = *p;
-}
-
-void se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
-
-void se_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u8 *ap = addr;
-
-	if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) {
-		volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + port); 
-		while (count--)
-			*bp = *ap++;
-	} else if (shifted_port(port)) {
-		while (count--)
-			*p = *ap++ << 8;
-	} else {
-		while (count--)
-			*p = *ap++;
-	}
-}
-
-void se_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	volatile __u16 *p = port2adr(port);
-	const __u16 *ap = addr;
-	while (count--)
-		*p = *ap++;
-}
-
-void se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c
deleted file mode 100644
index cdb0807928a5..000000000000
--- a/arch/sh/boards/se/770x/irq.c
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * linux/arch/sh/boards/se/770x/irq.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- * Copyright (C) 2006  Nobuhiro Iwamatsu
- *
- * Hitachi SolutionEngine Support.
- *
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se.h>
-
-static struct ipr_data ipr_irq_table[] = {
-	/*
-	* Super I/O (Just mimic PC):
-	*  1: keyboard
-	*  3: serial 0
-	*  4: serial 1
-	*  5: printer
-	*  6: floppy
-	*  8: rtc
-	* 12: mouse
-	* 14: ide0
-	*/
-#if defined(CONFIG_CPU_SUBTYPE_SH7705)
-	/* This is default value */
-	{ 13, 0, 8,  0x0f-13, },
-	{ 5 , 0, 4,  0x0f- 5, },
-	{ 10, 1, 0,  0x0f-10, },
-	{ 7 , 2, 4,  0x0f- 7, },
-	{ 3 , 2, 0,  0x0f- 3, },
-	{ 1 , 3, 12, 0x0f- 1, },
-	{ 12, 3, 4,  0x0f-12, }, /* LAN */
-	{ 2 , 4, 8,  0x0f- 2, }, /* PCIRQ2 */
-	{ 6 , 4, 4,  0x0f- 6, }, /* PCIRQ1 */
-	{ 14, 4, 0,  0x0f-14, }, /* PCIRQ0 */
-	{ 0 , 5, 12, 0x0f   , }, 
-	{ 4 , 5, 4,  0x0f- 4, },
-	{ 8 , 6, 12, 0x0f- 8, },
-	{ 9 , 6, 8,  0x0f- 9, },
-	{ 11, 6, 4,  0x0f-11, },
-#else
-	{ 14, 0,  8, 0x0f-14, },
-	{ 12, 0,  4, 0x0f-12, },
-	{  8, 1,  4, 0x0f- 8, },
-	{  6, 2, 12, 0x0f- 6, },
-	{  5, 2,  8, 0x0f- 5, },
-	{  4, 2,  4, 0x0f- 4, },
-	{  3, 2,  0, 0x0f- 3, },
-	{  1, 3, 12, 0x0f- 1, },
-#if defined(CONFIG_STNIC)
-	/* ST NIC */
-	{ 10, 3,  4, 0x0f-10, }, 	/* LAN */
-#endif
-	/* MRSHPC IRQs setting */
-	{  0, 4, 12, 0x0f- 0, },	/* PCIRQ3 */
-	{ 11, 4,  8, 0x0f-11, }, 	/* PCIRQ2 */
-	{  9, 4,  4, 0x0f- 9, }, 	/* PCIRQ1 */
-	{  7, 4,  0, 0x0f- 7, }, 	/* PCIRQ0 */
-	/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
-	/* NOTE: #2 and #13 are not used on PC */
-	{ 13, 6,  4, 0x0f-13, }, 	/* SLOTIRQ2 */
-	{  2, 6,  0, 0x0f- 2, }, 	/* SLOTIRQ1 */
-#endif
-};
-
-static unsigned long ipr_offsets[] = {
-	BCR_ILCRA,
-	BCR_ILCRB,
-	BCR_ILCRC,
-	BCR_ILCRD,
-	BCR_ILCRE,
-	BCR_ILCRF,
-	BCR_ILCRG,
-};
-
-static struct ipr_desc ipr_irq_desc = {
-	.ipr_offsets	= ipr_offsets,
-	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
-
-	.ipr_data	= ipr_irq_table,
-	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
-	.chip = {
-		.name	= "IPR-se770x",
-	},
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se_IRQ(void)
-{
-	/* Disable all interrupts */
-	ctrl_outw(0, BCR_ILCRA);
-	ctrl_outw(0, BCR_ILCRB);
-	ctrl_outw(0, BCR_ILCRC);
-	ctrl_outw(0, BCR_ILCRD);
-	ctrl_outw(0, BCR_ILCRE);
-	ctrl_outw(0, BCR_ILCRF);
-	ctrl_outw(0, BCR_ILCRG);
-
-	register_ipr_controller(&ipr_irq_desc);
-}
diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/se/770x/setup.c
deleted file mode 100644
index 318bc8a3969c..000000000000
--- a/arch/sh/boards/se/770x/setup.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * linux/arch/sh/boards/se/770x/setup.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se.h>
-#include <asm/io.h>
-#include <asm/smc37c93x.h>
-#include <asm/heartbeat.h>
-
-void init_se_IRQ(void);
-
-/*
- * Configure the Super I/O chip
- */
-static void __init smsc_config(int index, int data)
-{
-	outb_p(index, INDEX_PORT);
-	outb_p(data, DATA_PORT);
-}
-
-/* XXX: Another candidate for a more generic cchip machine vector */
-static void __init smsc_setup(char **cmdline_p)
-{
-	outb_p(CONFIG_ENTER, CONFIG_PORT);
-	outb_p(CONFIG_ENTER, CONFIG_PORT);
-
-	/* FDC */
-	smsc_config(CURRENT_LDN_INDEX, LDN_FDC);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
-
-	/* AUXIO (GPIO): to use IDE1 */
-	smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
-	smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
-	smsc_config(GPIO47_INDEX, 0x00); /* nIOWOP */
-
-	/* COM1 */
-	smsc_config(CURRENT_LDN_INDEX, LDN_COM1);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IO_BASE_HI_INDEX, 0x03);
-	smsc_config(IO_BASE_LO_INDEX, 0xf8);
-	smsc_config(IRQ_SELECT_INDEX, 4); /* IRQ4 */
-
-	/* COM2 */
-	smsc_config(CURRENT_LDN_INDEX, LDN_COM2);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IO_BASE_HI_INDEX, 0x02);
-	smsc_config(IO_BASE_LO_INDEX, 0xf8);
-	smsc_config(IRQ_SELECT_INDEX, 3); /* IRQ3 */
-
-	/* RTC */
-	smsc_config(CURRENT_LDN_INDEX, LDN_RTC);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IRQ_SELECT_INDEX, 8); /* IRQ8 */
-
-	/* XXX: PARPORT, KBD, and MOUSE will come here... */
-	outb_p(CONFIG_EXIT, CONFIG_PORT);
-}
-
-
-static struct resource cf_ide_resources[] = {
-	[0] = {
-		.start  = PA_MRSHPC_IO + 0x1f0,
-		.end    = PA_MRSHPC_IO + 0x1f0 + 8,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
-		.end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
-		.flags  = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start  = IRQ_CFCARD,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cf_ide_device  = {
-	.name           = "pata_platform",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(cf_ide_resources),
-	.resource       = cf_ide_resources,
-};
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
-	.bit_pos	= heartbeat_bit_pos,
-	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
-	.regsize	= 16,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= &heartbeat_data,
-	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *se_devices[] __initdata = {
-	&heartbeat_device,
-	&cf_ide_device,
-};
-
-static int __init se_devices_setup(void)
-{
-	return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
-}
-device_initcall(se_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se __initmv = {
-	.mv_name		= "SolutionEngine",
-	.mv_setup		= smsc_setup,
-#if defined(CONFIG_CPU_SH4)
-	.mv_nr_irqs		= 48,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7708)
-	.mv_nr_irqs		= 32,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7709)
-	.mv_nr_irqs		= 61,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7705)
-	.mv_nr_irqs		= 86,
-#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712)
-	.mv_nr_irqs             = 104,
-#endif
-
-	.mv_inb			= se_inb,
-	.mv_inw			= se_inw,
-	.mv_inl			= se_inl,
-	.mv_outb		= se_outb,
-	.mv_outw		= se_outw,
-	.mv_outl		= se_outl,
-
-	.mv_inb_p		= se_inb_p,
-	.mv_inw_p		= se_inw,
-	.mv_inl_p		= se_inl,
-	.mv_outb_p		= se_outb_p,
-	.mv_outw_p		= se_outw,
-	.mv_outl_p		= se_outl,
-
-	.mv_insb		= se_insb,
-	.mv_insw		= se_insw,
-	.mv_insl		= se_insl,
-	.mv_outsb		= se_outsb,
-	.mv_outsw		= se_outsw,
-	.mv_outsl		= se_outsl,
-
-	.mv_init_irq		= init_se_IRQ,
-};
diff --git a/arch/sh/boards/se/7721/irq.c b/arch/sh/boards/se/7721/irq.c
deleted file mode 100644
index c4fdd622bf8b..000000000000
--- a/arch/sh/boards/se/7721/irq.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7721/irq.c
- *
- * Copyright (C) 2008  Renesas Solutions Corp.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <asm/se7721.h>
-
-enum {
-	UNUSED = 0,
-
-	/* board specific interrupt sources */
-	MRSHPC,
-};
-
-static struct intc_vect vectors[] __initdata = {
-	INTC_IRQ(MRSHPC, MRSHPC_IRQ0),
-};
-
-static struct intc_prio_reg prio_registers[] __initdata = {
-	{ FPGA_ILSR6, 0, 8, 4, /* IRLMSK */
-	  { 0, MRSHPC } },
-};
-
-static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors,
-			 NULL, NULL, prio_registers, NULL);
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7721_IRQ(void)
-{
-	/* PPCR */
-	ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118);
-
-	register_intc_controller(&intc_desc);
-	intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0);
-}
diff --git a/arch/sh/boards/se/7721/setup.c b/arch/sh/boards/se/7721/setup.c
deleted file mode 100644
index 1be3e92752f7..000000000000
--- a/arch/sh/boards/se/7721/setup.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7721/setup.c
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- *
- * Hitachi UL SolutionEngine 7721 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se7721.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
-	.bit_pos	= heartbeat_bit_pos,
-	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
-	.regsize	= 16,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= &heartbeat_data,
-	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct resource cf_ide_resources[] = {
-	[0] = {
-		.start	= PA_MRSHPC_IO + 0x1f0,
-		.end	= PA_MRSHPC_IO + 0x1f0 + 8 ,
-		.flags	= IORESOURCE_IO,
-	},
-	[1] = {
-		.start	= PA_MRSHPC_IO + 0x1f0 + 0x206,
-		.end	= PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8,
-		.flags	= IORESOURCE_IO,
-	},
-	[2] = {
-		.start  = MRSHPC_IRQ0,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cf_ide_device = {
-	.name		= "pata_platform",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(cf_ide_resources),
-	.resource	= cf_ide_resources,
-};
-
-static struct platform_device *se7721_devices[] __initdata = {
-	&cf_ide_device,
-	&heartbeat_device
-};
-
-static int __init se7721_devices_setup(void)
-{
-	return platform_add_devices(se7721_devices,
-		ARRAY_SIZE(se7721_devices));
-}
-device_initcall(se7721_devices_setup);
-
-static void __init se7721_setup(char **cmdline_p)
-{
-	/* for USB */
-	ctrl_outw(0x0000, 0xA405010C);	/* PGCR */
-	ctrl_outw(0x0000, 0xA405010E);	/* PHCR */
-	ctrl_outw(0x00AA, 0xA4050118);	/* PPCR */
-	ctrl_outw(0x0000, 0xA4050124);	/* PSELA */
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_se7721 __initmv = {
-	.mv_name		= "Solution Engine 7721",
-	.mv_setup		= se7721_setup,
-	.mv_nr_irqs		= 109,
-	.mv_init_irq		= init_se7721_IRQ,
-};
diff --git a/arch/sh/boards/se/7722/irq.c b/arch/sh/boards/se/7722/irq.c
deleted file mode 100644
index 0b03f3f610b8..000000000000
--- a/arch/sh/boards/se/7722/irq.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7722/irq.c
- *
- * Copyright (C) 2007  Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7722 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se7722.h>
-
-static void disable_se7722_irq(unsigned int irq)
-{
-	unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
-	ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
-}
-
-static void enable_se7722_irq(unsigned int irq)
-{
-	unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
-	ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
-}
-
-static struct irq_chip se7722_irq_chip __read_mostly = {
-	.name           = "SE7722-FPGA",
-	.mask           = disable_se7722_irq,
-	.unmask         = enable_se7722_irq,
-	.mask_ack       = disable_se7722_irq,
-};
-
-static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
-{
-	unsigned short intv = ctrl_inw(IRQ01_STS);
-	struct irq_desc *ext_desc;
-	unsigned int ext_irq = SE7722_FPGA_IRQ_BASE;
-
-	intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
-
-	while (intv) {
-		if (intv & 1) {
-			ext_desc = irq_desc + ext_irq;
-			handle_level_irq(ext_irq, ext_desc);
-		}
-		intv >>= 1;
-		ext_irq++;
-	}
-}
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7722_IRQ(void)
-{
-	int i;
-
-	ctrl_outw(0, IRQ01_MASK);       /* disable all irqs */
-	ctrl_outw(0x2000, 0xb03fffec);  /* mrshpc irq enable */
-
-	for (i = 0; i < SE7722_FPGA_IRQ_NR; i++)
-		set_irq_chip_and_handler_name(SE7722_FPGA_IRQ_BASE + i,
-					      &se7722_irq_chip,
-					      handle_level_irq, "level");
-
-	set_irq_chained_handler(IRQ0_IRQ, se7722_irq_demux);
-	set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
-
-	set_irq_chained_handler(IRQ1_IRQ, se7722_irq_demux);
-	set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW);
-}
diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/se/7722/setup.c
deleted file mode 100644
index ede3957fc14a..000000000000
--- a/arch/sh/boards/se/7722/setup.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7722/setup.c
- *
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7722 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/input.h>
-#include <linux/smc91x.h>
-#include <asm/machvec.h>
-#include <asm/se7722.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-#include <asm/sh_keysc.h>
-
-/* Heartbeat */
-static struct heartbeat_data heartbeat_data = {
-	.regsize = 16,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start  = PA_LED,
-		.end    = PA_LED,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name           = "heartbeat",
-	.id             = -1,
-	.dev = {
-		.platform_data = &heartbeat_data,
-	},
-	.num_resources  = ARRAY_SIZE(heartbeat_resources),
-	.resource       = heartbeat_resources,
-};
-
-/* SMC91x */
-static struct smc91x_platdata smc91x_info = {
-	.flags = SMC91X_USE_16BIT,
-};
-
-static struct resource smc91x_eth_resources[] = {
-	[0] = {
-		.name   = "smc91x-regs" ,
-		.start  = PA_LAN + 0x300,
-		.end    = PA_LAN + 0x300 + 0x10 ,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = SMC_IRQ,
-		.end    = SMC_IRQ,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_eth_device = {
-	.name           = "smc91x",
-	.id             = 0,
-	.dev = {
-		.dma_mask               = NULL,         /* don't use dma */
-		.coherent_dma_mask      = 0xffffffff,
-		.platform_data	= &smc91x_info,
-	},
-	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
-	.resource       = smc91x_eth_resources,
-};
-
-static struct resource cf_ide_resources[] = {
-	[0] = {
-		.start  = PA_MRSHPC_IO + 0x1f0,
-		.end    = PA_MRSHPC_IO + 0x1f0 + 8 ,
-		.flags  = IORESOURCE_IO,
-	},
-	[1] = {
-		.start  = PA_MRSHPC_IO + 0x1f0 + 0x206,
-		.end    = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8,
-		.flags  = IORESOURCE_IO,
-	},
-	[2] = {
-		.start  = MRSHPC_IRQ0,
-		.end    = MRSHPC_IRQ0,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device cf_ide_device  = {
-	.name           = "pata_platform",
-	.id             = -1,
-	.num_resources  = ARRAY_SIZE(cf_ide_resources),
-	.resource       = cf_ide_resources,
-};
-
-static struct sh_keysc_info sh_keysc_info = {
-	.mode = SH_KEYSC_MODE_1, /* KEYOUT0->5, KEYIN0->4 */
-	.scan_timing = 3,
-	.delay = 5,
-	.keycodes = { /* SW1 -> SW30 */
-		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E,
-		KEY_F, KEY_G, KEY_H, KEY_I, KEY_J,
-		KEY_K, KEY_L, KEY_M, KEY_N, KEY_O,
-		KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T,
-		KEY_U, KEY_V, KEY_W, KEY_X, KEY_Y,
-		KEY_Z,
-		KEY_HOME, KEY_SLEEP, KEY_WAKEUP, KEY_COFFEE, /* life */
-	},
-};
-
-static struct resource sh_keysc_resources[] = {
-	[0] = {
-		.start  = 0x044b0000,
-		.end    = 0x044b000f,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = 79,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sh_keysc_device = {
-	.name           = "sh_keysc",
-	.num_resources  = ARRAY_SIZE(sh_keysc_resources),
-	.resource       = sh_keysc_resources,
-	.dev	= {
-		.platform_data	= &sh_keysc_info,
-	},
-};
-
-static struct platform_device *se7722_devices[] __initdata = {
-	&heartbeat_device,
-	&smc91x_eth_device,
-	&cf_ide_device,
-	&sh_keysc_device,
-};
-
-static int __init se7722_devices_setup(void)
-{
-	return platform_add_devices(se7722_devices,
-		ARRAY_SIZE(se7722_devices));
-}
-device_initcall(se7722_devices_setup);
-
-static void __init se7722_setup(char **cmdline_p)
-{
-	ctrl_outw(0x010D, FPGA_OUT);    /* FPGA */
-
-	ctrl_outl(0x00051001, MSTPCR0);
-	ctrl_outl(0x00000000, MSTPCR1);
-	/* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC, USB */
-	ctrl_outl(0xffffb7c0, MSTPCR2);
-
-	ctrl_outw(0x0000, PORT_PECR);   /* PORT E 1 = IRQ5 ,E 0 = BS */
-	ctrl_outw(0x1000, PORT_PJCR);   /* PORT J 1 = IRQ1,J 0 =IRQ0 */
-
-	/* LCDC I/O */
-	ctrl_outw(0x0020, PORT_PSELD);
-
-	/* SIOF1*/
-	ctrl_outw(0x0003, PORT_PSELB);
-	ctrl_outw(0xe000, PORT_PSELC);
-	ctrl_outw(0x0000, PORT_PKCR);
-
-	/* LCDC */
-	ctrl_outw(0x4020, PORT_PHCR);
-	ctrl_outw(0x0000, PORT_PLCR);
-	ctrl_outw(0x0000, PORT_PMCR);
-	ctrl_outw(0x0002, PORT_PRCR);
-	ctrl_outw(0x0000, PORT_PXCR);   /* LCDC,CS6A */
-
-	/* KEYSC */
-	ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */
-	ctrl_outw(0x0000, PORT_PYCR);
-	ctrl_outw(0x0000, PORT_PZCR);
-	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA);
-	ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se7722 __initmv = {
-	.mv_name                = "Solution Engine 7722" ,
-	.mv_setup               = se7722_setup ,
-	.mv_nr_irqs		= SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_NR,
-	.mv_init_irq		= init_se7722_IRQ,
-};
diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/se/7751/io.c
deleted file mode 100644
index e8d846cec89d..000000000000
--- a/arch/sh/boards/se/7751/io.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Hitachi 7751 SolutionEngine.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_se.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include <asm/se7751.h>
-#include <asm/addrspace.h>
-
-static inline volatile u16 *port2adr(unsigned int port)
-{
-	if (port >= 0x2000)
-		return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000));
-	maybebadio((unsigned long)port);
-	return (volatile __u16*)port;
-}
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-unsigned char sh7751se_inb(unsigned long port)
-{
-	if (PXSEG(port))
-		return *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-		return *(volatile unsigned char *)pci_ioaddr(port);
-	else
-		return (*port2adr(port)) & 0xff;
-}
-
-unsigned char sh7751se_inb_p(unsigned long port)
-{
-	unsigned char v;
-
-        if (PXSEG(port))
-                v = *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port))
-                v = *(volatile unsigned char *)pci_ioaddr(port);
-	else
-		v = (*port2adr(port)) & 0xff;
-	ctrl_delay();
-	return v;
-}
-
-unsigned short sh7751se_inw(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned short *)port;
-	else if (is_pci_ioaddr(port))
-                return *(volatile unsigned short *)pci_ioaddr(port);
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-unsigned int sh7751se_inl(unsigned long port)
-{
-        if (PXSEG(port))
-                return *(volatile unsigned long *)port;
-	else if (is_pci_ioaddr(port))
-                return *(volatile unsigned int *)pci_ioaddr(port);
-	else if (port >= 0x2000)
-		return *port2adr(port);
-	else
-		maybebadio(port);
-	return 0;
-}
-
-void sh7751se_outb(unsigned char value, unsigned long port)
-{
-
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
-	else
-		*(port2adr(port)) = value;
-}
-
-void sh7751se_outb_p(unsigned char value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned char*)pci_ioaddr(port)) = value;
-	else
-		*(port2adr(port)) = value;
-	ctrl_delay();
-}
-
-void sh7751se_outw(unsigned short value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned short *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned short *)pci_ioaddr(port)) = value;
-	else if (port >= 0x2000)
-		*port2adr(port) = value;
-	else
-		maybebadio(port);
-}
-
-void sh7751se_outl(unsigned int value, unsigned long port)
-{
-        if (PXSEG(port))
-                *(volatile unsigned long *)port = value;
-	else if (is_pci_ioaddr(port))
-		*((unsigned long*)pci_ioaddr(port)) = value;
-	else
-		maybebadio(port);
-}
-
-void sh7751se_insl(unsigned long port, void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
-
-void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	maybebadio(port);
-}
diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c
deleted file mode 100644
index c3d12590e5db..000000000000
--- a/arch/sh/boards/se/7751/irq.c
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7751/irq.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/irq.h>
-#include <asm/se7751.h>
-
-static struct ipr_data ipr_irq_table[] = {
-	{ 13, 3, 3, 2 },
-	/* Add additional entries here as drivers are added and tested. */
-};
-
-static unsigned long ipr_offsets[] = {
-	BCR_ILCRA,
-	BCR_ILCRB,
-	BCR_ILCRC,
-	BCR_ILCRD,
-	BCR_ILCRE,
-	BCR_ILCRF,
-	BCR_ILCRG,
-};
-
-static struct ipr_desc ipr_irq_desc = {
-	.ipr_offsets	= ipr_offsets,
-	.nr_offsets	= ARRAY_SIZE(ipr_offsets),
-
-	.ipr_data	= ipr_irq_table,
-	.nr_irqs	= ARRAY_SIZE(ipr_irq_table),
-
-	.chip = {
-		.name	= "IPR-se7751",
-	},
-};
-
-/*
- * Initialize IRQ setting
- */
-void __init init_7751se_IRQ(void)
-{
-	register_ipr_controller(&ipr_irq_desc);
-}
diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/se/7751/setup.c
deleted file mode 100644
index deefbfd92591..000000000000
--- a/arch/sh/boards/se/7751/setup.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7751/setup.c
- *
- * Copyright (C) 2000  Kazumoto Kojima
- *
- * Hitachi SolutionEngine Support.
- *
- * Modified for 7751 Solution Engine by
- * Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se7751.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
-
-static struct heartbeat_data heartbeat_data = {
-	.bit_pos	= heartbeat_bit_pos,
-	.nr_bits	= ARRAY_SIZE(heartbeat_bit_pos),
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= PA_LED,
-		.end	= PA_LED,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.dev	= {
-		.platform_data	= &heartbeat_data,
-	},
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *se7751_devices[] __initdata = {
-	&heartbeat_device,
-};
-
-static int __init se7751_devices_setup(void)
-{
-	return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
-}
-__initcall(se7751_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_7751se __initmv = {
-	.mv_name		= "7751 SolutionEngine",
-	.mv_nr_irqs		= 72,
-
-	.mv_inb			= sh7751se_inb,
-	.mv_inw			= sh7751se_inw,
-	.mv_inl			= sh7751se_inl,
-	.mv_outb		= sh7751se_outb,
-	.mv_outw		= sh7751se_outw,
-	.mv_outl		= sh7751se_outl,
-
-	.mv_inb_p		= sh7751se_inb_p,
-	.mv_inw_p		= sh7751se_inw,
-	.mv_inl_p		= sh7751se_inl,
-	.mv_outb_p		= sh7751se_outb_p,
-	.mv_outw_p		= sh7751se_outw,
-	.mv_outl_p		= sh7751se_outl,
-
-	.mv_insl		= sh7751se_insl,
-	.mv_outsl		= sh7751se_outsl,
-
-	.mv_init_irq		= init_7751se_IRQ,
-};
diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/se/7780/irq.c
deleted file mode 100644
index 6bd70da6bb47..000000000000
--- a/arch/sh/boards/se/7780/irq.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7780/irq.c
- *
- * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/se7780.h>
-
-/*
- * Initialize IRQ setting
- */
-void __init init_se7780_IRQ(void)
-{
-	/* enable all interrupt at FPGA */
-	ctrl_outw(0, FPGA_INTMSK1);
-	/* mask SM501 interrupt */
-	ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1);
-	/* enable all interrupt at FPGA */
-	ctrl_outw(0, FPGA_INTMSK2);
-
-	/* set FPGA INTSEL register */
-	/* FPGA + 0x06 */
-	ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) |
-		(IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1);
-
-	/* FPGA + 0x08 */
-	ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) |
-		(IRQPIN_EXTINT3 << IRQPOS_EXTINT3) |
-		(IRQPIN_EXTINT2 << IRQPOS_EXTINT2) |
-		(IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2);
-
-	/* FPGA + 0x0A */
-	ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3);
-
-	plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */
-}
diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/se/7780/setup.c
deleted file mode 100644
index 0f08ab3b2bec..000000000000
--- a/arch/sh/boards/se/7780/setup.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * linux/arch/sh/boards/se/7780/setup.c
- *
- * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
- *
- * Hitachi UL SolutionEngine 7780 Support.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/machvec.h>
-#include <asm/se7780.h>
-#include <asm/io.h>
-#include <asm/heartbeat.h>
-
-/* Heartbeat */
-static struct heartbeat_data heartbeat_data = {
-	.regsize = 16,
-};
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start  = PA_LED,
-		.end    = PA_LED,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name           = "heartbeat",
-	.id             = -1,
-	.dev = {
-		.platform_data = &heartbeat_data,
-	},
-	.num_resources  = ARRAY_SIZE(heartbeat_resources),
-	.resource       = heartbeat_resources,
-};
-
-/* SMC91x */
-static struct resource smc91x_eth_resources[] = {
-	[0] = {
-		.name   = "smc91x-regs" ,
-		.start  = PA_LAN + 0x300,
-		.end    = PA_LAN + 0x300 + 0x10 ,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = SMC_IRQ,
-		.end    = SMC_IRQ,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device smc91x_eth_device = {
-	.name           = "smc91x",
-	.id             = 0,
-	.dev = {
-		.dma_mask               = NULL,         /* don't use dma */
-		.coherent_dma_mask      = 0xffffffff,
-	},
-	.num_resources  = ARRAY_SIZE(smc91x_eth_resources),
-	.resource       = smc91x_eth_resources,
-};
-
-static struct platform_device *se7780_devices[] __initdata = {
-	&heartbeat_device,
-	&smc91x_eth_device,
-};
-
-static int __init se7780_devices_setup(void)
-{
-	return platform_add_devices(se7780_devices,
-		ARRAY_SIZE(se7780_devices));
-}
-device_initcall(se7780_devices_setup);
-
-#define GPIO_PHCR        0xFFEA000E
-#define GPIO_PMSELR      0xFFEA0080
-#define GPIO_PECR        0xFFEA0008
-
-static void __init se7780_setup(char **cmdline_p)
-{
-	/* "SH-Linux" on LED Display */
-	ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) );
-	ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) );
-	ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) );
-	ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) );
-	ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) );
-	ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) );
-	ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) );
-	ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) );
-
-	printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
-
-	/*
-	 * PCI REQ/GNT setting
-	 *   REQ0/GNT0 -> USB
-	 *   REQ1/GNT1 -> PC Card
-	 *   REQ2/GNT2 -> Serial ATA
-	 *   REQ3/GNT3 -> PCI slot
-	 */
-	ctrl_outw(0x0213, FPGA_REQSEL);
-
-	/* GPIO setting */
-	ctrl_outw(0x0000, GPIO_PECR);
-	ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR);
-	ctrl_outw(0x0c00, GPIO_PMSELR);
-
-	/* iVDR Power ON */
-	ctrl_outw(0x0001, FPGA_IVDRPW);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_se7780 __initmv = {
-	.mv_name                = "Solution Engine 7780" ,
-	.mv_setup               = se7780_setup ,
-	.mv_nr_irqs		= 111 ,
-	.mv_init_irq		= init_se7780_IRQ,
-};
diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c
deleted file mode 100644
index 934ac4f1c48f..000000000000
--- a/arch/sh/boards/sh03/setup.c
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * linux/arch/sh/boards/sh03/setup.c
- *
- * Copyright (C) 2004  Interface Co.,Ltd. Saito.K
- *
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/platform_device.h>
-#include <asm/io.h>
-#include <asm/rtc.h>
-#include <asm/sh03/io.h>
-#include <asm/sh03/sh03.h>
-#include <asm/addrspace.h>
-
-static void __init init_sh03_IRQ(void)
-{
-	plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-extern void *cf_io_base;
-
-static void __iomem *sh03_ioport_map(unsigned long port, unsigned int size)
-{
-	if (PXSEG(port))
-		return (void __iomem *)port;
-	/* CompactFlash (IDE) */
-	if (((port >= 0x1f0) && (port <= 0x1f7)) || (port == 0x3f6))
-		return (void __iomem *)((unsigned long)cf_io_base + port);
-
-        return (void __iomem *)(port + PCI_IO_BASE);
-}
-
-/* arch/sh/boards/sh03/rtc.c */
-void sh03_time_init(void);
-
-static void __init sh03_setup(char **cmdline_p)
-{
-	board_time_init = sh03_time_init;
-}
-
-static struct resource heartbeat_resources[] = {
-	[0] = {
-		.start	= 0xa0800000,
-		.end	= 0xa0800000,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device heartbeat_device = {
-	.name		= "heartbeat",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(heartbeat_resources),
-	.resource	= heartbeat_resources,
-};
-
-static struct platform_device *sh03_devices[] __initdata = {
-	&heartbeat_device,
-};
-
-static int __init sh03_devices_setup(void)
-{
-	return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
-}
-__initcall(sh03_devices_setup);
-
-static struct sh_machine_vector mv_sh03 __initmv = {
-	.mv_name		= "Interface (CTP/PCI-SH03)",
-	.mv_setup		= sh03_setup,
-	.mv_nr_irqs		= 48,
-	.mv_ioport_map		= sh03_ioport_map,
-	.mv_init_irq		= init_sh03_IRQ,
-};
diff --git a/arch/sh/boards/shmin/Makefile b/arch/sh/boards/shmin/Makefile
deleted file mode 100644
index 3190cc72430e..000000000000
--- a/arch/sh/boards/shmin/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the SHMIN board.
-#
-
-obj-y	 := setup.o
diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c
deleted file mode 100644
index 7022483f98e8..000000000000
--- a/arch/sh/boards/snapgear/setup.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * linux/arch/sh/boards/snapgear/setup.c
- *
- * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
- * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
- *
- * Based on files with the following comments:
- *
- *           Copyright (C) 2000  Kazumoto Kojima
- *
- *           Modified for 7751 Solution Engine by
- *           Ian da Silva and Jeremy Siegel, 2001.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <asm/machvec.h>
-#include <asm/snapgear.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/cpu/timer.h>
-
-/*
- * EraseConfig handling functions
- */
-
-static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
-{
-	(void)ctrl_inb(0xb8000000);	/* dummy read */
-
-	printk("SnapGear: erase switch interrupt!\n");
-
-	return IRQ_HANDLED;
-}
-
-static int __init eraseconfig_init(void)
-{
-	printk("SnapGear: EraseConfig init\n");
-	/* Setup "EraseConfig" switch on external IRQ 0 */
-	if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
-				"Erase Config", NULL))
-		printk("SnapGear: failed to register IRQ%d for Reset witch\n",
-				IRL0_IRQ);
-	else
-		printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
-				IRL0_IRQ);
-	return(0);
-}
-
-module_init(eraseconfig_init);
-
-/****************************************************************************/
-/*
- * Initialize IRQ setting
- *
- * IRL0 = erase switch
- * IRL1 = eth0
- * IRL2 = eth1
- * IRL3 = crypto
- */
-
-static void __init init_snapgear_IRQ(void)
-{
-	printk("Setup SnapGear IRQ/IPR ...\n");
-	/* enable individual interrupt mode for externals */
-	plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_snapgear __initmv = {
-	.mv_name		= "SnapGear SecureEdge5410",
-	.mv_nr_irqs		= 72,
-
-	.mv_inb			= snapgear_inb,
-	.mv_inw			= snapgear_inw,
-	.mv_inl			= snapgear_inl,
-	.mv_outb		= snapgear_outb,
-	.mv_outw		= snapgear_outw,
-	.mv_outl		= snapgear_outl,
-
-	.mv_inb_p		= snapgear_inb_p,
-	.mv_inw_p		= snapgear_inw,
-	.mv_inl_p		= snapgear_inl,
-	.mv_outb_p		= snapgear_outb_p,
-	.mv_outw_p		= snapgear_outw,
-	.mv_outl_p		= snapgear_outl,
-
-	.mv_init_irq		= init_snapgear_IRQ,
-};
diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile
index 89b408620dcb..5b54965eef98 100644
--- a/arch/sh/boot/Makefile
+++ b/arch/sh/boot/Makefile
@@ -18,9 +18,10 @@ CONFIG_PAGE_OFFSET	?= 0x80000000
 CONFIG_MEMORY_START	?= 0x0c000000
 CONFIG_BOOT_LINK_OFFSET	?= 0x00800000
 CONFIG_ZERO_PAGE_OFFSET	?= 0x00001000
+CONFIG_ENTRY_OFFSET	?= 0x00001000
 
 export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \
-       CONFIG_ZERO_PAGE_OFFSET
+       CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET
 
 targets := zImage vmlinux.srec uImage uImage.srec
 subdir- := compressed
@@ -40,7 +41,7 @@ KERNEL_LOAD	:= $(shell /bin/bash -c 'printf "0x%08x" \
 KERNEL_ENTRY	:= $(shell /bin/bash -c 'printf "0x%08x" \
 		     $$[$(CONFIG_PAGE_OFFSET)  + \
 			$(CONFIG_MEMORY_START) + \
-			$(CONFIG_ZERO_PAGE_OFFSET)+0x1000]')
+			$(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]')
 
 quiet_cmd_uimage = UIMAGE  $@
       cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \
diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32
index c0d25fb1aa60..47685f618ae7 100644
--- a/arch/sh/boot/compressed/Makefile_32
+++ b/arch/sh/boot/compressed/Makefile_32
@@ -35,8 +35,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh-linux -T
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,ld)
+$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,as_o_S)
diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64
index 912f3e205a0d..658d4f915556 100644
--- a/arch/sh/boot/compressed/Makefile_64
+++ b/arch/sh/boot/compressed/Makefile_64
@@ -37,8 +37,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE
 $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
 	$(call if_changed,gzip)
 
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh64-linux -T
 OBJCOPYFLAGS += -R .empty_zero_page
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
-	$(call if_changed,ld)
+$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE
+	$(call if_changed,as_o_S)
diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S
index f72c1989f5f2..622eac3cf556 100644
--- a/arch/sh/boot/compressed/head_64.S
+++ b/arch/sh/boot/compressed/head_64.S
@@ -14,8 +14,8 @@
  *   Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com)
  */
 #include <asm/cache.h>
-#include <asm/cpu/mmu_context.h>
-#include <asm/cpu/registers.h>
+#include <cpu/mmu_context.h>
+#include <cpu/registers.h>
 
 /*
  * Fixed TLB entries to identity map the beginning of RAM
diff --git a/arch/sh/boot/compressed/misc_32.c b/arch/sh/boot/compressed/misc_32.c
index adcea31e663e..f386997e4d9c 100644
--- a/arch/sh/boot/compressed/misc_32.c
+++ b/arch/sh/boot/compressed/misc_32.c
@@ -74,8 +74,6 @@ static unsigned outcnt = 0;  /* bytes in output buffer */
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -84,11 +82,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 int puts(const char *);
 
@@ -101,38 +95,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size <0) error("Malloc error");
-	if (free_mem_ptr == 0) error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 #ifdef CONFIG_SH_STANDARD_BIOS
 size_t strlen(const char *s)
 {
diff --git a/arch/sh/boot/compressed/misc_64.c b/arch/sh/boot/compressed/misc_64.c
index a006ef89b9dd..2941657e18aa 100644
--- a/arch/sh/boot/compressed/misc_64.c
+++ b/arch/sh/boot/compressed/misc_64.c
@@ -72,8 +72,6 @@ static unsigned outcnt = 0;	/* bytes in output buffer */
 static int fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 extern char input_data[];
 extern int input_len;
@@ -82,11 +80,7 @@ static long bytes_out = 0;
 static uch *output_data;
 static unsigned long output_ptr = 0;
 
-static void *malloc(int size);
-static void free(void *where);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 static void puts(const char *);
 
@@ -99,40 +93,6 @@ static unsigned long free_mem_end_ptr;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		error("Malloc error\n");
-	if (free_mem_ptr == 0)
-		error("Memory error\n");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *) free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("\nOut of memory\n");
-
-	return p;
-}
-
-static void free(void *where)
-{				/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (long) *ptr;
-}
-
 void puts(const char *s)
 {
 }
diff --git a/arch/sh/boot/compressed/piggy.S b/arch/sh/boot/compressed/piggy.S
new file mode 100644
index 000000000000..566071926b13
--- /dev/null
+++ b/arch/sh/boot/compressed/piggy.S
@@ -0,0 +1,8 @@
+	.global	input_len, input_data
+	.data
+input_len:
+	.long	input_data_end - input_data
+input_data:
+	.incbin	"arch/sh/boot/compressed/vmlinux.bin.gz"
+input_data_end:
+	.end
diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr
deleted file mode 100644
index 1ed9d791f863..000000000000
--- a/arch/sh/boot/compressed/vmlinux.scr
+++ /dev/null
@@ -1,9 +0,0 @@
-SECTIONS
-{
-  .data : { 
-	input_len = .;
-	LONG(input_data_end - input_data) input_data = .; 
-	*(.data) 
-	input_data_end = .; 
-	}
-}
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
new file mode 100644
index 000000000000..29926a9b9ce2
--- /dev/null
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -0,0 +1,964 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:18:59 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_KALLSYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+CONFIG_CPU_SUBTYPE_SH7723=y
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_AP325RXA=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
+CONFIG_SH_PCLK_FREQ=33333333
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xffffffff
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 57728788b753..3dc1cbd8a981 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,14 +1,17 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc7
-# Fri Sep 21 15:46:27 2007
+# Linux kernel version: 2.6.27-rc1
+# Mon Aug  4 16:49:13 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_TIME=y
@@ -37,12 +40,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -55,21 +61,39 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -80,6 +104,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -93,13 +118,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -108,6 +137,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 CONFIG_CPU_SUBTYPE_SH7091=y
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -116,14 +146,17 @@ CONFIG_CPU_SUBTYPE_SH7091=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -133,6 +166,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -142,12 +176,15 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
 # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -155,6 +192,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -194,6 +233,7 @@ CONFIG_SH_PCLK_FREQ=49876504
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -204,7 +244,10 @@ CONFIG_CPU_FREQ_TABLE=y
 CONFIG_CPU_FREQ_STAT=y
 # CONFIG_CPU_FREQ_STAT_DETAILS is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
@@ -239,12 +282,16 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
+CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -263,10 +310,7 @@ CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_PCI_LEGACY=y
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
 
@@ -275,10 +319,6 @@ CONFIG_PCI_AUTO=y
 #
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -291,6 +331,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -309,6 +350,7 @@ CONFIG_IP_FIB_HASH=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -316,8 +358,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -334,10 +374,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -345,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -366,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -374,6 +412,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
+CONFIG_GDROM=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -384,11 +423,15 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -400,44 +443,49 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_FUSION is not set
 
 #
-# Fusion MPT device support
+# IEEE 1394 (FireWire) support
 #
-# CONFIG_FUSION is not set
 
 #
-# IEEE 1394 (FireWire) support
+# Enable only one of the two stacks, unless you know what you are doing
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -449,6 +497,7 @@ CONFIG_8139TOO=y
 # CONFIG_8139TOO_TUNE_TWISTER is not set
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
@@ -464,12 +513,12 @@ CONFIG_8139TOO=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -491,7 +540,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -505,6 +553,8 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_MAPLE=y
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -530,10 +580,13 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -553,6 +606,19 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -568,45 +634,40 @@ CONFIG_SH_WDT=y
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-# CONFIG_I2C is not set
 
 #
-# SPI support
+# Sonics Silicon Backplane
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
@@ -615,11 +676,12 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -653,7 +715,15 @@ CONFIG_FB_PVR2=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+# CONFIG_FB_SH_MOBILE_LCDC is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -680,49 +750,30 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -735,14 +786,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -771,7 +819,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -786,14 +833,14 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -807,35 +854,25 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_SH_KGDB is not set
@@ -845,14 +882,95 @@ CONFIG_ENABLE_MUST_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 756d38dc2f71..41e25b3a5b01 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Tue Sep 11 19:42:44 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:24:57 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +22,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -34,12 +37,15 @@ CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_USER_NS is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -52,6 +58,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -64,6 +71,19 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -73,6 +93,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -86,13 +107,17 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -101,6 +126,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -109,14 +135,17 @@ CONFIG_CPU_SUBTYPE_SH7709=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -126,6 +155,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0d000000
 CONFIG_MEMORY_SIZE=0x00400000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -135,7 +165,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -143,6 +175,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -181,6 +215,7 @@ CONFIG_SH_PCLK_FREQ=22110000
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -219,11 +254,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -237,10 +275,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 CONFIG_ISA=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -263,11 +297,12 @@ CONFIG_BINFMT_ELF=y
 #
 # Power management options (EXPERIMENTAL)
 #
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_PM=y
-CONFIG_PM_LEGACY=y
 # CONFIG_PM_DEBUG is not set
 CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
 
 #
@@ -282,9 +317,12 @@ CONFIG_APM_EMULATION=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_MTD is not set
 # CONFIG_PARPORT is not set
@@ -294,8 +332,11 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -332,6 +373,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
@@ -342,14 +384,17 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_NCR53C406A is not set
 # CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 # CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_QDI is not set
@@ -370,11 +415,9 @@ CONFIG_INPUT_POLLDEV=y
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=y
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
+# CONFIG_INPUT_APMPOWER is not set
 
 #
 # Input Device Drivers
@@ -387,6 +430,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_HP6XX=y
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -395,12 +439,15 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 CONFIG_TOUCHSCREEN_HP600=y
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -417,9 +464,11 @@ CONFIG_SERIO=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -439,7 +488,6 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=64
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -454,39 +502,45 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-# CONFIG_DAB is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_HP680=y
+# CONFIG_DAB is not set
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
@@ -495,11 +549,12 @@ CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -511,7 +566,20 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_HIT=y
+CONFIG_FB_SH_MOBILE_LCDC=y
 # CONFIG_FB_VIRTUAL is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_HP680=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -533,15 +601,13 @@ CONFIG_FONT_PEARL_8x8=y
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -564,9 +630,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -575,23 +642,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -606,13 +657,10 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -643,7 +691,6 @@ CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -658,8 +705,11 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 
@@ -668,10 +718,6 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -714,22 +760,21 @@ CONFIG_NLS_CODEPAGE_850=y
 # CONFIG_NLS_UTF8 is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_SH_KGDB is not set
@@ -739,50 +784,95 @@ CONFIG_ENABLE_MUST_CHECK=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=y
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=y
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_LZO is not set
 # CONFIG_CRYPTO_HW is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index 38f934ab50c7..99cc39c5c6ca 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,44 +1,53 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Thu Dec  7 17:13:04 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:35:07 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -50,34 +59,48 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -91,67 +114,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-CONFIG_SH_LANDISK=y
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -160,53 +142,60 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -214,19 +203,32 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+CONFIG_SH_LANDISK=y
+# CONFIG_SH_TITAN is not set
+# CONFIG_SH_LBOX_RE2 is not set
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=33333333
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -241,12 +243,11 @@ CONFIG_SH_PCLK_FREQ=33333333
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
-CONFIG_HEARTBEAT=y
 
 #
 # Additional SuperH Device Drivers
 #
+CONFIG_HEARTBEAT=y
 # CONFIG_PUSH_SWITCH is not set
 
 #
@@ -254,13 +255,17 @@ CONFIG_HEARTBEAT=y
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -273,16 +278,12 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
-CONFIG_ISA=y
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
@@ -301,29 +302,16 @@ CONFIG_YENTA_ENE_TUNE=y
 CONFIG_YENTA_TOSHIBA=y
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
 CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -331,13 +319,14 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -364,49 +353,36 @@ CONFIG_IP_PNP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
 #
 CONFIG_IP_NF_QUEUE=m
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -421,10 +397,6 @@ CONFIG_ATALK=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -432,9 +404,20 @@ CONFIG_ATALK=m
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -443,35 +426,17 @@ CONFIG_ATALK=m
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -484,63 +449,66 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_ATAPI=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 # CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 CONFIG_BLK_DEV_IDESCSI=y
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
 CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_SHARE_IRQ=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
 CONFIG_BLK_DEV_OFFBOARD=y
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-CONFIG_IDEDMA_PCI_AUTO=y
-CONFIG_IDEDMA_ONLYDISK=y
 CONFIG_BLK_DEV_AEC62XX=y
 # CONFIG_BLK_DEV_ALI15X3 is not set
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8213 is not set
 # CONFIG_BLK_DEV_IT821X is not set
 # CONFIG_BLK_DEV_NS87415 is not set
 # CONFIG_BLK_DEV_PDC202XX_OLD is not set
@@ -550,18 +518,15 @@ CONFIG_BLK_DEV_AEC62XX=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_IDEDMA_IVB is not set
-CONFIG_IDEDMA_AUTO=y
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -583,6 +548,7 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -590,77 +556,43 @@ CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -671,76 +603,49 @@ CONFIG_MD_RAID1=m
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 # CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=m
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -748,18 +653,20 @@ CONFIG_NET_PCI=y
 # CONFIG_NE2K_PCI is not set
 CONFIG_8139CP=y
 # CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+# CONFIG_SC92031 is not set
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -767,58 +674,53 @@ CONFIG_8139CP=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Wireless LAN
 #
-# CONFIG_NET_RADIO is not set
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
-# PCMCIA network device support
+# USB Network Adapters
 #
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+# CONFIG_USB_USBNET is not set
 # CONFIG_NET_PCMCIA is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -826,6 +728,7 @@ CONFIG_8139CP=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -835,7 +738,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -845,6 +747,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -858,10 +761,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -880,22 +786,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -903,65 +797,77 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
 
 #
-# Video Capture Adapters
+# Multimedia core support
 #
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=m
 
 #
-# Video Capture Adapters
+# Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_PMS is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_STRADIS is not set
-
-#
-# V4L USB devices
-#
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+# CONFIG_USB_GSPCA is not set
 CONFIG_VIDEO_USBVIDEO=m
 CONFIG_USB_VICAM=m
 CONFIG_USB_IBMCAM=m
@@ -975,106 +881,100 @@ CONFIG_USB_STV680=m
 # CONFIG_USB_ZC0301 is not set
 CONFIG_USB_PWC=m
 # CONFIG_USB_PWC_DEBUG is not set
-
-#
-# Radio Adapters
-#
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_RADIO_ADAPTERS=y
 # CONFIG_RADIO_GEMTEK_PCI is not set
 # CONFIG_RADIO_MAXIRADIO is not set
 # CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
 CONFIG_USB_DSBR=m
+# CONFIG_USB_SI470X is not set
+# CONFIG_DAB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Graphics support
 #
-# CONFIG_DVB is not set
-CONFIG_USB_DABUSB=m
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Graphics support
+# Display device support
 #
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FB is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
 #
-# CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 CONFIG_FONT_8x16=y
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
+CONFIG_SOUND_PRIME=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
 
 #
-# Open Sound System
+# USB Input Devices
 #
-CONFIG_SOUND_PRIME=m
-# CONFIG_OSS_OBSOLETE_DRIVER is not set
-# CONFIG_SOUND_BT878 is not set
-# CONFIG_SOUND_ES1371 is not set
-# CONFIG_SOUND_ICH is not set
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
-# CONFIG_SOUND_VIA82CXXX is not set
+CONFIG_USB_HID=m
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 
 #
-# USB support
+# USB HID Boot Protocol drivers
 #
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=m
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1094,66 +994,28 @@ CONFIG_USB_STORAGE_SDDR09=y
 CONFIG_USB_STORAGE_SDDR55=y
 CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
 #
 # USB port drivers
 #
-
-#
-# USB Serial Converter support
-#
 CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
 # CONFIG_USB_SERIAL_CP2101 is not set
@@ -1168,6 +1030,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
 # CONFIG_USB_SERIAL_EDGEPORT_TI is not set
 # CONFIG_USB_SERIAL_GARMIN is not set
 # CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
 # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
 # CONFIG_USB_SERIAL_KEYSPAN is not set
 # CONFIG_USB_SERIAL_KLSI is not set
@@ -1175,8 +1038,11 @@ CONFIG_USB_SERIAL_FTDI_SIO=m
 # CONFIG_USB_SERIAL_MCT_U232 is not set
 # CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
 # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -1197,6 +1063,7 @@ CONFIG_USB_EMI26=m
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1208,61 +1075,18 @@ CONFIG_USB_SISUSBVGA=m
 CONFIG_USB_SISUSBVGA_CON=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1276,7 +1100,6 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 CONFIG_REISERFS_FS=y
 # CONFIG_REISERFS_CHECK is not set
@@ -1285,14 +1108,11 @@ CONFIG_REISERFS_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1328,7 +1148,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1343,26 +1162,24 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
 CONFIG_LOCKD=m
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
@@ -1376,17 +1193,12 @@ CONFIG_SMB_FS=m
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1427,46 +1239,128 @@ CONFIG_NLS_CODEPAGE_932=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index b68b6cdbb78f..aecdfd33c695 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Sat Mar 24 22:04:27 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:39:41 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -11,37 +13,40 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -54,34 +59,48 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -95,66 +114,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-CONFIG_SH_LBOX_RE2=y
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -163,55 +142,60 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -219,12 +203,21 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_7751_SYSTEMH is not set
+# CONFIG_SH_SECUREEDGE5410 is not set
+# CONFIG_SH_RTS7751R2D is not set
+# CONFIG_SH_LANDISK is not set
+# CONFIG_SH_TITAN is not set
+CONFIG_SH_LBOX_RE2=y
 
 #
 # Timer and clock configuration
@@ -232,6 +225,10 @@ CONFIG_CPU_HAS_PTEA=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=40000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -246,7 +243,6 @@ CONFIG_SH_PCLK_FREQ=40000000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
@@ -262,11 +258,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -280,15 +279,12 @@ CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
 #
 # Bus options
 #
-CONFIG_ISA=y
 CONFIG_PCI=y
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 CONFIG_PCI_AUTO=y
 CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
 CONFIG_PCCARD=y
 CONFIG_PCMCIA_DEBUG=y
 CONFIG_PCMCIA=y
@@ -306,29 +302,16 @@ CONFIG_YENTA_O2=y
 # CONFIG_YENTA_TOSHIBA is not set
 # CONFIG_PD6729 is not set
 # CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_TCIC is not set
-CONFIG_PCMCIA_PROBE=y
 CONFIG_PCCARD_NONSTATIC=y
-
-#
-# PCI Hotplug Support
-#
 # CONFIG_HOTPLUG_PCI is not set
 
 #
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -336,7 +319,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
@@ -344,6 +326,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -370,29 +353,26 @@ CONFIG_IP_PNP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-
-#
-# IP: Virtual Server Configuration
-#
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
 
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NF_CONNTRACK_ENABLED is not set
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
@@ -401,20 +381,8 @@ CONFIG_NETFILTER=y
 # CONFIG_IP_NF_QUEUE is not set
 # CONFIG_IP_NF_IPTABLES is not set
 # CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -427,10 +395,6 @@ CONFIG_NETFILTER=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -438,9 +402,20 @@ CONFIG_NETFILTER=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -449,36 +424,17 @@ CONFIG_NETFILTER=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNP is not set
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_CPQ_CISS_DA is not set
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
@@ -490,19 +446,18 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -510,6 +465,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -531,6 +487,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -538,71 +495,49 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AACRAID is not set
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_IN2000 is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DTC3280 is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 # CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_T128 is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
-
-#
-# PCMCIA SCSI adapter support
-#
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -612,7 +547,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -622,6 +556,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
 # CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
 # CONFIG_PATA_CS5520 is not set
 # CONFIG_PATA_CS5530 is not set
@@ -635,18 +570,18 @@ CONFIG_ATA=y
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_IT8213 is not set
 # CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_QDI is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
@@ -656,88 +591,52 @@ CONFIG_ATA=y
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
 CONFIG_PATA_PLATFORM=y
-
-#
-# Old CD-ROM drivers (not SCSI, not IDE)
-#
-# CONFIG_CD_NO_IDESCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
 # CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
-# CONFIG_IEEE1394 is not set
 
 #
-# I2O device support
+# Enable only one of the two stacks, unless you know what you are doing
 #
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_HAPPYMEAL is not set
 # CONFIG_SUNGEM is not set
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
 # CONFIG_SMC91X is not set
-# CONFIG_NET_VENDOR_RACAL is not set
-
-#
-# Tulip family network device support
-#
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
-# CONFIG_AT1700 is not set
-# CONFIG_DEPCA is not set
 # CONFIG_HP100 is not set
-# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_AC3200 is not set
-# CONFIG_APRICOT is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_DGRS is not set
 # CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
@@ -749,19 +648,20 @@ CONFIG_8139TOO_PIO=y
 CONFIG_8139TOO_TUNE_TWISTER=y
 # CONFIG_8139TOO_8129 is not set
 # CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
-
-#
-# Ethernet (1000 Mbit)
-#
+CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -769,36 +669,33 @@ CONFIG_8139TOO_TUNE_TWISTER=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
+# CONFIG_ATL1E is not set
+CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
-
-#
-# Token Ring devices
-#
+# CONFIG_NIU is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
 # CONFIG_PCMCIA_3C574 is not set
@@ -808,29 +705,16 @@ CONFIG_PCMCIA_PCNET=y
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
 # CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -838,6 +722,7 @@ CONFIG_PCMCIA_PCNET=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -847,7 +732,6 @@ CONFIG_INPUT_MOUSEDEV=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -857,6 +741,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -870,10 +755,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -892,22 +780,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
 
 #
 # PCMCIA character devices
@@ -915,125 +791,104 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
+CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Console display driver support
+# Display device support
 #
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Sound
+# Console display driver support
 #
+CONFIG_DUMMY_CONSOLE=y
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1047,37 +902,29 @@ CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_SH is not set
 # CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
 
 #
-# DMA Devices
+# SPI RTC drivers
 #
 
 #
-# Auxiliary Display support
+# Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
-# Virtualization
+# on-CPU RTC drivers
 #
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -1091,20 +938,16 @@ CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1136,7 +979,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1151,14 +993,14 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
 # CONFIG_SMB_FS is not set
@@ -1166,17 +1008,12 @@ CONFIG_RAMFS=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=y
@@ -1217,30 +1054,24 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
@@ -1251,20 +1082,100 @@ CONFIG_SH_STANDARD_BIOS=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index f8398a5f10ee..a3a80f3d27c0 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc2
-# Fri Aug 17 12:15:16 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:41:08 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -18,6 +20,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -35,12 +38,16 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
 CONFIG_AUDIT=y
+# CONFIG_AUDITSYSCALL is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -48,6 +55,7 @@ CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -55,6 +63,7 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
@@ -67,10 +76,24 @@ CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
@@ -81,6 +104,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -94,13 +118,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -109,6 +137,7 @@ CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 CONFIG_CPU_SUBTYPE_SH7720=y
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -117,14 +146,17 @@ CONFIG_CPU_SUBTYPE_SH7720=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -134,6 +166,7 @@ CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0C000000
 CONFIG_MEMORY_SIZE=0x03F00000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
@@ -143,7 +176,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -151,6 +186,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -173,7 +210,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_SH_DSP=y
 CONFIG_SH_ADC=y
 CONFIG_CPU_HAS_INTEVT=y
-CONFIG_CPU_HAS_INTC_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
 CONFIG_CPU_HAS_DSP=y
 
@@ -196,6 +232,7 @@ CONFIG_SH_PCLK_FREQ=24000000
 # CONFIG_TICK_ONESHOT is not set
 # CONFIG_NO_HZ is not set
 # CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -228,11 +265,14 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -245,10 +285,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 # Bus options
 #
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
 # CONFIG_PCCARD is not set
 
 #
@@ -289,6 +325,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -296,8 +333,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -314,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -325,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -346,9 +378,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -362,6 +397,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -374,6 +410,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -408,7 +445,6 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0x0000000
 CONFIG_MTD_PHYSMAP_LEN=0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=0
-# CONFIG_MTD_SOLUTIONENGINE is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -440,11 +476,14 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -457,18 +496,24 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 # CONFIG_SMC91X is not set
 CONFIG_SMC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 
@@ -477,10 +522,10 @@ CONFIG_SMC911X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -502,7 +547,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
 
@@ -516,6 +560,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -539,9 +584,11 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -569,60 +616,72 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
 
 #
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 # CONFIG_RTC_HCTOSYS is not set
@@ -644,9 +703,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -655,23 +715,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -684,18 +728,14 @@ CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -724,7 +764,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -744,30 +783,29 @@ CONFIG_JFFS2_FS_DEBUG=0
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-CONFIG_SUNRPC_BIND34=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -781,10 +819,6 @@ CONFIG_SUNRPC_BIND34=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="cp437"
 CONFIG_NLS_CODEPAGE_437=y
@@ -825,23 +859,16 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -852,6 +879,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -866,11 +894,16 @@ CONFIG_DEBUG_KOBJECT=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
@@ -879,6 +912,7 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
 CONFIG_SH_KGDB=y
 
 #
@@ -904,14 +938,17 @@ CONFIG_KGDB_DEFBITS_8=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index e89d951c3c16..e4b900e72dcd 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,28 +1,35 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 11:27:01 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:47:16 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
@@ -31,10 +38,16 @@ CONFIG_SWAP=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -47,29 +60,42 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 # CONFIG_MODULES is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -83,59 +109,26 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-CONFIG_SH_SH4202_MICRODEV=y
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -144,67 +137,94 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 CONFIG_CPU_SUBTYPE_SH4_202=y
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x08000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-CONFIG_SH_WRITETHROUGH=y
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
-# CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
 
 #
-# Timer support
+# Board support
+#
+CONFIG_SH_SH4202_MICRODEV=y
+
+#
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=66000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -214,6 +234,7 @@ CONFIG_SH_PCLK_FREQ=66000000
 #
 # DMA support
 #
+CONFIG_SH_DMA_API=y
 CONFIG_SH_DMA=y
 CONFIG_NR_ONCHIP_DMA_CHANNELS=4
 # CONFIG_NR_DMA_CHANNELS_BOOL is not set
@@ -221,22 +242,30 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
 CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
@@ -251,30 +280,16 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
 # Bus options
 #
 CONFIG_SUPERHYWAY=y
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -282,12 +297,13 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 # CONFIG_PACKET is not set
 # CONFIG_UNIX is not set
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -308,30 +324,19 @@ CONFIG_IP_PNP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -344,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -355,9 +356,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -366,159 +378,96 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 # CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
-CONFIG_BLK_DEV_INITRD=y
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=1
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -536,6 +485,7 @@ CONFIG_SMC91X=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -554,143 +504,93 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-
-#
-# Hardware Monitoring support
-#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Misc devices
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -702,20 +602,18 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -747,7 +645,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -762,21 +659,20 @@ CONFIG_RAMFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
@@ -789,17 +685,12 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -840,76 +731,127 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index 287408b2ace6..c4b3e1d8950d 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Thu May 22 14:30:07 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:44:41 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -77,9 +78,14 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -90,12 +96,13 @@ CONFIG_MODULES=y
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -173,7 +180,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -216,6 +225,8 @@ CONFIG_CPU_HAS_DSP=y
 #
 # CONFIG_SH_7722_SOLUTION_ENGINE is not set
 CONFIG_SH_MIGOR=y
+CONFIG_SH_MIGOR_QVGA=y
+# CONFIG_SH_MIGOR_RTA_WVGA is not set
 
 #
 # Timer and clock configuration
@@ -362,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -378,6 +390,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -475,6 +489,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -521,10 +536,10 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -537,6 +552,7 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -602,6 +618,7 @@ CONFIG_KEYBOARD_SH_KEYSC=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
@@ -636,21 +653,35 @@ CONFIG_I2C_BOARDINFO=y
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
 # CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_SH_MOBILE=y
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -663,6 +694,7 @@ CONFIG_I2C_SH_MOBILE=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -674,6 +706,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -710,10 +743,6 @@ CONFIG_SSB_POSSIBLE=y
 # Console display driver support
 #
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -738,7 +767,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
 # CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_PXA25X is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 CONFIG_SUPERH_BUILT_IN_M66592=y
@@ -757,6 +786,7 @@ CONFIG_USB_GADGET_DUALSPEED=y
 CONFIG_USB_G_SERIAL=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -790,6 +820,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
 
 #
 # SPI RTC drivers
@@ -810,6 +841,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -870,6 +902,7 @@ CONFIG_TMPFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -899,6 +932,7 @@ CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -955,6 +989,10 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -994,6 +1032,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 1a072615ffd4..57a300797584 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc4
-# Thu Mar  6 15:39:59 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:51:13 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -84,13 +85,20 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -101,6 +109,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -115,7 +124,6 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -126,6 +134,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -143,6 +152,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -173,7 +183,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -188,6 +200,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -268,7 +281,7 @@ CONFIG_KEXEC=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_RCU_TRACE=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -348,14 +361,13 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -384,6 +396,7 @@ CONFIG_LLC=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -400,6 +413,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -420,12 +435,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -499,9 +516,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -511,7 +532,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -556,17 +576,21 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -585,6 +609,7 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -593,7 +618,6 @@ CONFIG_AX88796_93CX6=y
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=m
-# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
@@ -616,32 +640,28 @@ CONFIG_8139TOO_8129=y
 # CONFIG_TLAN is not set
 CONFIG_VIA_RHINE=m
 CONFIG_VIA_RHINE_MMIO=y
-# CONFIG_VIA_RHINE_NAPI is not set
 # CONFIG_SC92031 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=m
-# CONFIG_E1000_NAPI is not set
 # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -654,6 +674,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -661,6 +682,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -701,6 +723,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -722,6 +745,7 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -750,12 +774,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -776,6 +795,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -787,13 +807,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 
 #
@@ -809,24 +840,9 @@ CONFIG_DAB=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -836,6 +852,8 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -844,6 +862,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -879,10 +898,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -903,7 +919,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
@@ -957,6 +972,7 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -967,20 +983,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1043,6 +1056,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1050,9 +1064,12 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1066,6 +1083,8 @@ CONFIG_SCHED_DEBUG=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
@@ -1091,51 +1110,84 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1144,8 +1196,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 0dc1ce7b9349..1d09d24d4298 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc3
-# Fri Nov 23 14:03:57 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 00:59:19 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -21,6 +22,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -39,18 +42,16 @@ CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_GROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -64,20 +65,37 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
@@ -88,6 +106,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -101,6 +120,7 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
@@ -109,7 +129,10 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -118,6 +141,7 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
 # CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -126,12 +150,15 @@ CONFIG_CPU_SHX2=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 CONFIG_CPU_SUBTYPE_SH7785=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -157,7 +184,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_HUGETLB_PAGE_SIZE_64K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 CONFIG_HUGETLB_PAGE_SIZE_1MB=y
@@ -173,6 +202,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 # CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -202,6 +232,7 @@ CONFIG_CPU_HAS_FPU=y
 # Board support
 #
 CONFIG_SH_HIGHLANDER=y
+# CONFIG_SH_SH7785LCR is not set
 # CONFIG_SH_R7780RP is not set
 # CONFIG_SH_R7780MP is not set
 CONFIG_SH_R7785RP=y
@@ -245,12 +276,13 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -295,6 +327,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -329,14 +362,13 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -355,6 +387,7 @@ CONFIG_LLC=m
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -364,6 +397,7 @@ CONFIG_LLC=m
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -380,6 +414,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -397,14 +433,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 CONFIG_EEPROM_93CX6=y
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -464,6 +504,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -476,9 +517,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -488,7 +533,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -517,6 +561,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -532,24 +577,27 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
@@ -576,20 +624,21 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
 CONFIG_R8169=y
-# CONFIG_R8169_NAPI is not set
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -601,6 +650,8 @@ CONFIG_NETDEV_10000=y
 # CONFIG_NIU is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -608,13 +659,13 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -649,6 +700,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -670,7 +722,9 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -697,12 +751,7 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
@@ -722,6 +771,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -733,13 +784,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -751,15 +813,15 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -792,6 +854,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
@@ -800,24 +864,9 @@ CONFIG_FB_DEFERRED_IO=y
 #
 # CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -827,17 +876,17 @@ CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -861,9 +910,10 @@ CONFIG_RTC_INTF_DEV=y
 #
 # Platform RTC drivers
 #
+# CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_V3020 is not set
@@ -872,10 +922,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -896,14 +943,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 CONFIG_FUSE_FS=m
@@ -951,8 +995,11 @@ CONFIG_CONFIGFS_FS=m
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -960,20 +1007,17 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1028,10 +1072,6 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1040,6 +1080,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
@@ -1050,6 +1091,7 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_PREEMPT is not set
 CONFIG_DEBUG_SPINLOCK=y
@@ -1066,12 +1108,14 @@ CONFIG_STACKTRACE=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
@@ -1091,54 +1135,96 @@ CONFIG_4KSTACKS=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index a0ebd439cbd2..840fe3843ffa 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Tue Jun  3 13:02:42 2008
+# Linux kernel version: 2.6.26
+# Mon Jul 28 22:23:03 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -33,21 +33,22 @@ CONFIG_LOCALVERSION=""
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+# CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -72,26 +73,36 @@ CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
+# CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
+CONFIG_SLOB=y
 CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -162,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -196,6 +209,7 @@ CONFIG_CPU_HAS_FPU=y
 #
 # Board support
 #
+CONFIG_SH_RSK7203=y
 
 #
 # Timer and clock configuration
@@ -274,6 +288,7 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
 #
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
@@ -424,8 +439,8 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x20000000
-CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0x0
 CONFIG_MTD_PHYSMAP_BANKWIDTH=4
 # CONFIG_MTD_UCLINUX is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -456,9 +471,11 @@ CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -475,7 +492,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -487,15 +503,15 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
-CONFIG_SMC91X=y
+# CONFIG_SMC91X is not set
+CONFIG_SMC911X=y
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
 # CONFIG_B44 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
-CONFIG_NETDEV_10000=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
 # Wireless LAN
@@ -503,6 +519,15 @@ CONFIG_NETDEV_10000=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 # CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
@@ -587,6 +612,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -605,6 +631,7 @@ CONFIG_SSB_POSSIBLE=y
 # Multimedia drivers
 #
 CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -618,26 +645,96 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -677,6 +774,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -734,6 +832,7 @@ CONFIG_SYSFS=y
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
@@ -743,12 +842,11 @@ CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -775,16 +873,20 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_OBJECTS=y
+# CONFIG_DEBUG_OBJECTS_SELFTEST is not set
+# CONFIG_DEBUG_OBJECTS_FREE is not set
+# CONFIG_DEBUG_OBJECTS_TIMERS is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -797,12 +899,14 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_WRITECOUNT=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+CONFIG_DEBUG_LIST=y
+CONFIG_DEBUG_SG=y
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
@@ -830,6 +934,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index 3a915fd436d9..8413236c1b37 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb  7 16:25:55 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:55:52 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -76,22 +77,31 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -170,6 +184,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -256,7 +271,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
@@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -490,7 +514,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -535,17 +558,21 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -564,6 +591,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -690,9 +719,11 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -765,6 +792,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -862,15 +904,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# SPI devices
-#
-
-#
-# SUPERH devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPERH=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index 0a6d3b9e648b..7d9fa6e9ded5 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Thu Feb  7 16:17:47 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 01:59:18 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
@@ -76,22 +77,31 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
 
 #
 # System type
@@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y
 CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -170,6 +184,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -256,7 +271,6 @@ CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
 CONFIG_GUSA=y
 # CONFIG_GUSA_RB is not set
 
@@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_CFG80211 is not set
 CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
 # CONFIG_RFKILL is not set
@@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
@@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -490,7 +514,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -535,17 +558,21 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 CONFIG_PATA_PLATFORM=y
+# CONFIG_PATA_SCH is not set
 # CONFIG_MD is not set
 # CONFIG_FUSION is not set
 
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -564,6 +591,7 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
 # CONFIG_NS83820 is not set
@@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_CHELSIO_T3 is not set
@@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
 # CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
 # CONFIG_TR is not set
 
 #
@@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -690,9 +719,11 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 CONFIG_SPI=y
 CONFIG_SPI_MASTER=y
 
@@ -765,6 +792,8 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 CONFIG_DAB=y
 # CONFIG_USB_DABUSB is not set
 
@@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
@@ -862,15 +904,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_OPL3_LIB=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALI5451 is not set
@@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_AU8810 is not set
 # CONFIG_SND_AU8820 is not set
 # CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
 # CONFIG_SND_AZT3328 is not set
 # CONFIG_SND_BT87X is not set
 # CONFIG_SND_CA0106 is not set
@@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 CONFIG_SND_YMFPCI=m
-CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# SPI devices
-#
-
-#
-# SUPERH devices
-#
-
-#
-# USB devices
-#
+CONFIG_SND_SPI=y
+CONFIG_SND_SUPERH=y
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# SoC Audio support for SuperH
-#
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=m
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
@@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 CONFIG_USB_LIBUSUAL=y
 
 #
@@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
@@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
@@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SH is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
@@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
 # CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
@@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index bb9bcd6591ab..6d834f242905 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Tue Jan 22 11:34:03 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:00:12 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -20,6 +21,7 @@ CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -38,24 +40,23 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -63,11 +64,13 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_VM_EVENT_COUNTERS=y
@@ -75,11 +78,24 @@ CONFIG_SLUB_DEBUG=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
@@ -90,6 +106,7 @@ CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -103,6 +120,7 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
@@ -113,6 +131,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
 # CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -130,6 +149,7 @@ CONFIG_CPU_SH4A=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -137,6 +157,7 @@ CONFIG_CPU_SUBTYPE_SH7780=y
 # CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
 # CONFIG_CPU_SUBTYPE_SH5_101 is not set
 # CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
@@ -159,7 +180,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_HUGETLB_PAGE_SIZE_64K=y
 # CONFIG_HUGETLB_PAGE_SIZE_256K is not set
 # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
@@ -174,6 +197,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_RESOURCES_64BIT=y
 CONFIG_ZONE_DMA_FLAG=0
@@ -205,7 +229,6 @@ CONFIG_CPU_HAS_FPU=y
 # CONFIG_SH_7780_SOLUTION_ENGINE is not set
 CONFIG_SH_SDK7780=y
 # CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_SDK7780_STANDALONE is not set
 CONFIG_SH_SDK7780_BASE=y
 
 #
@@ -250,12 +273,13 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
+# CONFIG_PREEMPT_RCU is not set
 CONFIG_GUSA=y
 
 #
@@ -321,6 +345,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -370,8 +395,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
 # CONFIG_INET6_XFRM_MODE_BEET is not set
 # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
 CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -397,7 +424,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_HTB is not set
 # CONFIG_NET_SCH_HFSC is not set
 # CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RR is not set
 # CONFIG_NET_SCH_RED is not set
 # CONFIG_NET_SCH_SFQ is not set
 # CONFIG_NET_SCH_TEQL is not set
@@ -405,7 +431,6 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_SCH_GRED is not set
 # CONFIG_NET_SCH_DSMARK is not set
 # CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_INGRESS is not set
 
 #
 # Classification
@@ -417,9 +442,9 @@ CONFIG_NET_SCHED=y
 # CONFIG_NET_CLS_U32 is not set
 # CONFIG_NET_CLS_RSVP is not set
 # CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_POLICE is not set
 CONFIG_NET_SCH_FIFO=y
 
 #
@@ -427,6 +452,7 @@ CONFIG_NET_SCH_FIFO=y
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
@@ -452,6 +478,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -475,16 +503,18 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 # CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
@@ -492,6 +522,7 @@ CONFIG_IDEDISK_MULTI_MODE=y
 # CONFIG_BLK_DEV_IDECS is not set
 # CONFIG_BLK_DEV_DELKIN is not set
 CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_BLK_DEV_IDESCSI is not set
@@ -501,14 +532,12 @@ CONFIG_IDE_PROC_FS=y
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=y
 CONFIG_BLK_DEV_PLATFORM=y
 
 #
 # PCI IDE chipsets support
 #
 CONFIG_BLK_DEV_IDEPCI=y
-# CONFIG_IDEPCI_SHARE_IRQ is not set
 CONFIG_IDEPCI_PCIBUS_ORDER=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
@@ -518,10 +547,8 @@ CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_AMD74XX is not set
 # CONFIG_BLK_DEV_CMD64X is not set
 # CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
 # CONFIG_BLK_DEV_CS5520 is not set
 # CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
 # CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
@@ -537,10 +564,7 @@ CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -600,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -613,9 +638,13 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
 # CONFIG_SATA_SVW is not set
 # CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
@@ -625,7 +654,6 @@ CONFIG_ATA=y
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
 # CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
 # CONFIG_SATA_SIS is not set
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
@@ -654,6 +682,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
@@ -670,6 +699,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
 # CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
 CONFIG_MD=y
 # CONFIG_BLK_DEV_MD is not set
 CONFIG_BLK_DEV_DM=y
@@ -686,11 +716,14 @@ CONFIG_BLK_DEV_DM=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -708,6 +741,7 @@ CONFIG_MII=y
 # CONFIG_CASSINI is not set
 # CONFIG_NET_VENDOR_3COM is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -726,6 +760,7 @@ CONFIG_SMC91X=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -743,7 +778,6 @@ CONFIG_SMC91X=y
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
 # CONFIG_NETCONSOLE_DYNAMIC is not set
 CONFIG_NETPOLL=y
@@ -780,6 +814,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -812,10 +847,13 @@ CONFIG_SERIO_LIBPS2=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -847,22 +885,20 @@ CONFIG_HW_RANDOM=y
 # CONFIG_SYNCLINK_CS is not set
 # CONFIG_CARDMAN_4000 is not set
 # CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -870,8 +906,10 @@ CONFIG_POWER_SUPPLY=y
 #
 CONFIG_SSB_POSSIBLE=y
 CONFIG_SSB=y
+CONFIG_SSB_SPROM=y
 CONFIG_SSB_PCIHOST_POSSIBLE=y
 CONFIG_SSB_PCIHOST=y
+# CONFIG_SSB_B43_PCI_BRIDGE is not set
 CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
 # CONFIG_SSB_PCMCIAHOST is not set
 # CONFIG_SSB_SILENT is not set
@@ -882,13 +920,24 @@ CONFIG_SSB_DRIVER_PCICORE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
 # CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
 # CONFIG_DAB is not set
 
 #
@@ -900,15 +949,15 @@ CONFIG_SSB_DRIVER_PCICORE=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
 # CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
 # CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -941,6 +990,8 @@ CONFIG_FB_DEFERRED_IO=y
 # CONFIG_FB_TRIDENT is not set
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
@@ -970,24 +1021,9 @@ CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_LOGO_SUPERH_MONO=y
 CONFIG_LOGO_SUPERH_VGA16=y
 CONFIG_LOGO_SUPERH_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
 # CONFIG_SND is not set
-
-#
-# Open Sound System
-#
 CONFIG_SOUND_PRIME=y
-# CONFIG_SOUND_TRIDENT is not set
-# CONFIG_SOUND_MSNDCLAS is not set
-# CONFIG_SOUND_MSNDPIN is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
@@ -1006,6 +1042,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
 
 #
 # Miscellaneous USB options
@@ -1014,15 +1051,18 @@ CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_DEVICE_CLASS is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # USB Host Controller Drivers
 #
+# CONFIG_USB_C67X00_HCD is not set
 CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -1033,6 +1073,7 @@ CONFIG_USB_EHCI_HCD=y
 #
 # CONFIG_USB_ACM is not set
 CONFIG_USB_PRINTER=y
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1054,6 +1095,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
 # CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1067,10 +1109,6 @@ CONFIG_USB_MON=y
 # USB port drivers
 #
 # CONFIG_USB_USS720 is not set
-
-#
-# USB Serial Converter support
-#
 # CONFIG_USB_SERIAL is not set
 
 #
@@ -1096,16 +1134,10 @@ CONFIG_USB_MON=y
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1117,13 +1149,11 @@ CONFIG_LEDS_CLASS=y
 # LED Triggers
 #
 # CONFIG_LEDS_TRIGGERS is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_INFINIBAND is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
 # CONFIG_UIO is not set
 
 #
@@ -1145,14 +1175,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=y
-# CONFIG_ROMFS_FS is not set
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 CONFIG_AUTOFS4_FS=y
 # CONFIG_FUSE_FS is not set
@@ -1203,8 +1230,11 @@ CONFIG_HUGETLB_PAGE=y
 # CONFIG_EFS_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1212,19 +1242,16 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1279,7 +1306,6 @@ CONFIG_NLS_ISO8859_15=y
 # CONFIG_NLS_KOI8_U is not set
 CONFIG_NLS_UTF8=y
 # CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
 
 #
 # Kernel hacking
@@ -1288,6 +1314,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_UNUSED_SYMBOLS=y
 # CONFIG_DEBUG_FS is not set
@@ -1295,10 +1322,14 @@ CONFIG_UNUSED_SYMBOLS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1313,12 +1344,14 @@ CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_FRAME_POINTER is not set
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SAMPLES is not set
 CONFIG_SH_STANDARD_BIOS=y
@@ -1338,52 +1371,94 @@ CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
 CONFIG_CRYPTO_ALGAPI=y
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
 # CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 6b34baa26eae..af15cbef12ba 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,10 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc4
-# Tue Jun  3 20:27:08 2008
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:06:07 2008
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -87,9 +88,14 @@ CONFIG_PROFILING=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
 # CONFIG_HAVE_KPROBES is not set
 # CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
 # CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
@@ -99,12 +105,13 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -175,7 +182,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -294,6 +303,7 @@ CONFIG_CF_BASE_ADDR=0xb8000000
 #
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 CONFIG_BINFMT_SHARED_FLAT=y
@@ -487,6 +497,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 CONFIG_EEPROM_93CX6=y
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -503,7 +514,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -516,6 +526,7 @@ CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -583,6 +594,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -594,6 +606,7 @@ CONFIG_SSB_POSSIBLE=y
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 
@@ -625,10 +638,6 @@ CONFIG_SSB_POSSIBLE=y
 # Display device support
 #
 # CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
@@ -669,6 +678,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 CONFIG_RTC_DRV_SH=y
+# CONFIG_DMADEVICES is not set
 # CONFIG_UIO is not set
 
 #
@@ -728,6 +738,7 @@ CONFIG_CONFIGFS_FS=y
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 CONFIG_ROMFS_FS=y
@@ -738,13 +749,12 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
 CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -776,6 +786,8 @@ CONFIG_DEBUG_FS=y
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -795,6 +807,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_VM=y
 # CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
@@ -860,6 +873,10 @@ CONFIG_CRYPTO_ALGAPI=y
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 # CONFIG_CRYPTO_SHA1 is not set
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
@@ -899,6 +916,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 CONFIG_CRC7=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 84c0075e2ad4..4e30b70377e2 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,40 +1,56 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 11:46:17 2006
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:08:38 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
@@ -46,33 +62,47 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 # CONFIG_FUTEX is not set
+CONFIG_ANON_INODES=y
 # CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-
-#
-# Block layer
-#
+CONFIG_KMOD=y
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -86,62 +116,28 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-# CONFIG_SH_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-CONFIG_SH_7343_SOLUTION_ENGINE=y
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_EC3104 is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_BIGSUR is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_R7780RP is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH4=y
 CONFIG_CPU_SH4A=y
 CONFIG_CPU_SH4AL_DSP=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
 # CONFIG_CPU_SUBTYPE_SH7708 is not set
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -150,67 +146,89 @@ CONFIG_CPU_SH4AL_DSP=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 CONFIG_CPU_SUBTYPE_SH7343=y
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x01000000
-CONFIG_32BIT=y
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_SH_FPU is not set
+# CONFIG_CPU_BIG_ENDIAN is not set
 # CONFIG_SH_FPU_EMU is not set
 CONFIG_SH_DSP=y
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_7343_SOLUTION_ENGINE=y
 
 #
-# Timer support
+# Timer and clock configuration
 #
 CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=27000000
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -225,57 +243,50 @@ CONFIG_SH_PCLK_FREQ=27000000
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
+
+#
+# Additional SuperH Device Drivers
+#
 CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
 
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 # CONFIG_CMDLINE_BOOL is not set
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_CF_ENABLER is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -283,22 +294,20 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
+# CONFIG_IP_PNP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
@@ -310,29 +319,18 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -345,10 +343,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 # CONFIG_NET_SCHED is not set
 
 #
@@ -356,9 +350,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
 # CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -367,36 +372,34 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -422,13 +425,15 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_MTD_RAM=y
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x0
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -445,130 +450,102 @@ CONFIG_MTD_RAM=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
 
 #
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
+# SCSI support type (disk, tape, CD-ROM)
 #
-# CONFIG_ATA is not set
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
 
 #
-# Multi-device support (RAID and LVM)
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
 #
-# CONFIG_MD is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
+# SCSI Transports
 #
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
 # CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_AX88796 is not set
 # CONFIG_STNIC is not set
 CONFIG_SMC91X=y
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -576,13 +553,13 @@ CONFIG_SMC91X=y
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -592,6 +569,7 @@ CONFIG_INPUT=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
@@ -605,9 +583,11 @@ CONFIG_INPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -626,156 +606,106 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
+# CONFIG_I2C is not set
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
-# Hardware Monitoring support
+# Multifunction device drivers
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
-# Misc devices
+# Multimedia devices
 #
 
 #
-# Multimedia devices
+# Multimedia core support
 #
 CONFIG_VIDEO_DEV=y
-CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
 CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_VIDEO_V4L2=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
 
 #
-# Video Capture Adapters
-#
-
-#
-# Video Capture Adapters
+# Multimedia drivers
 #
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
 CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
-
-#
-# Radio Adapters
-#
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
+CONFIG_RADIO_ADAPTERS=y
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_EPSON1355 is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_VIRTUAL is not set
 
 #
-# Console display driver support
+# Frame buffer hardware drivers
 #
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_SH_MOBILE_LCDC=m
+# CONFIG_FB_VIRTUAL is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-CONFIG_SOUND=y
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# Advanced Linux Sound Architecture
+# Console display driver support
 #
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE is not set
+# CONFIG_LOGO is not set
+CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -791,96 +721,49 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_VIRMIDI is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# Open Sound System
-#
+CONFIG_SND_SUPERH=y
+# CONFIG_SND_SOC is not set
 # CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
 #
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -909,7 +792,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -922,35 +804,34 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
@@ -963,56 +844,136 @@ CONFIG_SUNRPC=y
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
-# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_KGDB is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
+CONFIG_EARLY_PRINTK=y
+# CONFIG_SH_KGDB is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index 3a3c3c1f507d..80c1c72edb56 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,9 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc4
-# Fri Jun 15 19:43:06 2007
+# Linux kernel version: 2.6.26
+# Wed Jul 30 02:12:32 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_BUG=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -17,27 +19,26 @@ CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
@@ -49,6 +50,7 @@ CONFIG_EMBEDDED=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 CONFIG_ANON_INODES=y
@@ -60,20 +62,26 @@ CONFIG_EVENTFD=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_SLABINFO=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
 # CONFIG_MODULES is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -87,14 +95,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
 CONFIG_CPU_SH2=y
 CONFIG_CPU_SUBTYPE_SH7619=y
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -102,6 +113,8 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 # CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -110,14 +123,17 @@ CONFIG_CPU_SUBTYPE_SH7619=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
@@ -126,6 +142,7 @@ CONFIG_QUICKLIST=y
 CONFIG_PAGE_OFFSET=0x00000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
@@ -134,7 +151,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_ENTRY_OFFSET=0x00001000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -142,6 +161,8 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
@@ -151,7 +172,9 @@ CONFIG_NR_QUICK=2
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-CONFIG_SH_WRITETHROUGH=y
+# CONFIG_CACHE_WRITEBACK is not set
+CONFIG_CACHE_WRITETHROUGH=y
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -159,8 +182,6 @@ CONFIG_SH_WRITETHROUGH=y
 # CONFIG_CPU_LITTLE_ENDIAN is not set
 CONFIG_CPU_BIG_ENDIAN=y
 # CONFIG_SH_FPU_EMU is not set
-# CONFIG_SH_DSP is not set
-CONFIG_CPU_HAS_IPR_IRQ=y
 
 #
 # Board support
@@ -185,7 +206,6 @@ CONFIG_SH_CLK_MD=5
 #
 # DMA support
 #
-# CONFIG_SH_DMA is not set
 
 #
 # Companion Chips
@@ -205,11 +225,13 @@ CONFIG_HZ_100=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
 # CONFIG_CRASH_DUMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
 
 #
 # Boot options
@@ -221,15 +243,13 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000
 #
 # Bus options
 #
+# CONFIG_CF_ENABLER is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 
 #
-# PCCARD (PCMCIA/CardBus) support
-#
-
-#
 # Executable file formats
 #
+CONFIG_BINFMT_ELF_FDPIC=y
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
@@ -250,10 +270,6 @@ CONFIG_BINFMT_ZFLAT=y
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
@@ -263,6 +279,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -275,6 +292,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -334,29 +352,17 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# Misc devices
-#
-# CONFIG_BLINK is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -364,21 +370,10 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -386,13 +381,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
 #
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -416,6 +411,7 @@ CONFIG_INPUT=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -433,123 +429,84 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_UNIX98_PTYS is not set
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Dallas's 1-wire bus
+# Sonics Silicon Backplane
 #
-# CONFIG_W1 is not set
-# CONFIG_HWMON is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
-CONFIG_DAB=y
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Graphics support
+# Multimedia drivers
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_DAB=y
 
 #
-# Display device support
+# Graphics support
 #
-# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
+# CONFIG_DISPLAY_SUPPORT is not set
 # CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -561,12 +518,9 @@ CONFIG_HID=y
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -592,7 +546,6 @@ CONFIG_PROC_SYSCTL=y
 # CONFIG_SYSFS is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 
 #
 # Miscellaneous filesystems
@@ -607,8 +560,11 @@ CONFIG_RAMFS=y
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 
@@ -617,28 +573,23 @@ CONFIG_RAMFS=y
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 
@@ -646,20 +597,20 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # Security options
 #
 # CONFIG_KEYS is not set
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_CRYPTO is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index 2dd83af988f0..7be79cd04eb0 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -1,53 +1,57 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.21-rc4
-# Wed Mar 28 10:19:02 2007
+# Linux kernel version: 2.6.26-rc6
+# Wed Jun 18 16:36:08 2008
 #
 CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
 CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -55,33 +59,41 @@ CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
 CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_BASE_FULL is not set
 CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
-CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
 CONFIG_TINY_SHMEM=y
 CONFIG_BASE_SMALL=1
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
-
-#
-# Block layer
-#
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
 
 #
 # IO Schedulers
@@ -95,57 +107,17 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
 
 #
 # System type
 #
-CONFIG_SOLUTION_ENGINE=y
-CONFIG_SH_SOLUTION_ENGINE=y
-# CONFIG_SH_7751_SOLUTION_ENGINE is not set
-# CONFIG_SH_7300_SOLUTION_ENGINE is not set
-# CONFIG_SH_7343_SOLUTION_ENGINE is not set
-# CONFIG_SH_73180_SOLUTION_ENGINE is not set
-# CONFIG_SH_7751_SYSTEMH is not set
-# CONFIG_SH_HP6XX is not set
-# CONFIG_SH_SATURN is not set
-# CONFIG_SH_DREAMCAST is not set
-# CONFIG_SH_MPC1211 is not set
-# CONFIG_SH_SH03 is not set
-# CONFIG_SH_SECUREEDGE5410 is not set
-# CONFIG_SH_HS7751RVOIP is not set
-# CONFIG_SH_7710VOIPGW is not set
-# CONFIG_SH_RTS7751R2D is not set
-# CONFIG_SH_HIGHLANDER is not set
-# CONFIG_SH_EDOSK7705 is not set
-# CONFIG_SH_SH4202_MICRODEV is not set
-# CONFIG_SH_LANDISK is not set
-# CONFIG_SH_TITAN is not set
-# CONFIG_SH_SHMIN is not set
-# CONFIG_SH_7206_SOLUTION_ENGINE is not set
-# CONFIG_SH_7619_SOLUTION_ENGINE is not set
-# CONFIG_SH_LBOX_RE2 is not set
-# CONFIG_SH_UNKNOWN is not set
-
-#
-# Processor selection
-#
 CONFIG_CPU_SH3=y
-
-#
-# SH-2 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7604 is not set
 # CONFIG_CPU_SUBTYPE_SH7619 is not set
-
-#
-# SH-2A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
 # CONFIG_CPU_SUBTYPE_SH7206 is not set
-
-#
-# SH-3 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH7300 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
 # CONFIG_CPU_SUBTYPE_SH7705 is not set
 # CONFIG_CPU_SUBTYPE_SH7706 is not set
 # CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -153,10 +125,8 @@ CONFIG_CPU_SH3=y
 # CONFIG_CPU_SUBTYPE_SH7709 is not set
 # CONFIG_CPU_SUBTYPE_SH7710 is not set
 CONFIG_CPU_SUBTYPE_SH7712=y
-
-#
-# SH-4 Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
 # CONFIG_CPU_SUBTYPE_SH7750 is not set
 # CONFIG_CPU_SUBTYPE_SH7091 is not set
 # CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -165,37 +135,37 @@ CONFIG_CPU_SUBTYPE_SH7712=y
 # CONFIG_CPU_SUBTYPE_SH7751R is not set
 # CONFIG_CPU_SUBTYPE_SH7760 is not set
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
-
-#
-# ST40 Processor Support
-#
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
-
-#
-# SH-4A Processor Support
-#
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
 # CONFIG_CPU_SUBTYPE_SH7785 is not set
-
-#
-# SH4AL-DSP Processor Support
-#
-# CONFIG_CPU_SUBTYPE_SH73180 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
 # CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
 
 #
 # Memory management options
 #
+CONFIG_QUICKLIST=y
 CONFIG_MMU=y
 CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000
+CONFIG_29BIT=y
 CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_PAGE_SIZE_4KB=y
 # CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -203,21 +173,21 @@ CONFIG_FLATMEM_MANUAL=y
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_RESOURCES_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
 
 #
 # Cache configuration
 #
 # CONFIG_SH_DIRECT_MAPPED is not set
-# CONFIG_SH_WRITETHROUGH is not set
-# CONFIG_SH_OCRAM is not set
-CONFIG_CF_ENABLER=y
-# CONFIG_CF_AREA5 is not set
-CONFIG_CF_AREA6=y
-CONFIG_CF_BASE_ADDR=0xb8000000
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
 
 #
 # Processor features
@@ -230,6 +200,14 @@ CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_CPU_HAS_INTEVT=y
 CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_DSP=y
+
+#
+# Board support
+#
+CONFIG_SOLUTION_ENGINE=y
+CONFIG_SH_SOLUTION_ENGINE=y
+# CONFIG_SH_AP325RXA is not set
 
 #
 # Timer and clock configuration
@@ -237,6 +215,10 @@ CONFIG_CPU_HAS_SR_RB=y
 CONFIG_SH_TMU=y
 CONFIG_SH_TIMER_IRQ=16
 CONFIG_SH_PCLK_FREQ=66666666
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
@@ -251,7 +233,6 @@ CONFIG_SH_PCLK_FREQ=66666666
 #
 # Companion Chips
 #
-# CONFIG_HD6446X_SERIES is not set
 
 #
 # Additional SuperH Device Drivers
@@ -267,48 +248,40 @@ CONFIG_HZ_250=y
 # CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
 # CONFIG_KEXEC is not set
-# CONFIG_SMP is not set
+# CONFIG_CRASH_DUMP is not set
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+# CONFIG_GUSA_RB is not set
 
 #
 # Boot options
 #
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
-# CONFIG_UBC_WAKEUP is not set
 CONFIG_CMDLINE_BOOL=y
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
 # Bus options
 #
-# CONFIG_PCI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 # CONFIG_PCCARD is not set
 
 #
-# PCI Hotplug Support
-#
-
-#
 # Executable file formats
 #
 CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_FLAT is not set
 # CONFIG_BINFMT_MISC is not set
 
 #
-# Power management options (EXPERIMENTAL)
-#
-# CONFIG_PM is not set
-
-#
 # Networking
 #
 CONFIG_NET=y
@@ -316,7 +289,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-# CONFIG_NETDEBUG is not set
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -324,6 +296,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 CONFIG_NET_KEY=y
 # CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
@@ -334,11 +307,10 @@ CONFIG_ASK_IP_FIB_HASH=y
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_MULTIPLE_TABLES=y
 CONFIG_IP_ROUTE_MULTIPATH=y
-# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
 CONFIG_IP_ROUTE_VERBOSE=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
+CONFIG_IP_PNP_BOOTP=y
 # CONFIG_IP_PNP_RARP is not set
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
@@ -355,30 +327,17 @@ CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
 # CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -391,15 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
 CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_FIFO=y
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
 
 #
 # Queueing/Scheduling
@@ -408,6 +359,7 @@ CONFIG_NET_SCH_CBQ=y
 CONFIG_NET_SCH_HTB=y
 CONFIG_NET_SCH_HFSC=y
 CONFIG_NET_SCH_PRIO=y
+# CONFIG_NET_SCH_RR is not set
 CONFIG_NET_SCH_RED=y
 CONFIG_NET_SCH_SFQ=y
 CONFIG_NET_SCH_TEQL=y
@@ -415,7 +367,6 @@ CONFIG_NET_SCH_TBF=y
 CONFIG_NET_SCH_GRED=y
 CONFIG_NET_SCH_DSMARK=y
 CONFIG_NET_SCH_NETEM=y
-CONFIG_NET_SCH_INGRESS=y
 
 #
 # Classification
@@ -429,50 +380,55 @@ CONFIG_NET_CLS_FW=y
 # CONFIG_NET_CLS_U32 is not set
 # CONFIG_NET_CLS_RSVP is not set
 # CONFIG_NET_CLS_RSVP6 is not set
+# CONFIG_NET_CLS_FLOW is not set
 # CONFIG_NET_EMATCH is not set
 # CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_POLICE is not set
 CONFIG_NET_CLS_IND=y
-CONFIG_NET_ESTIMATOR=y
+CONFIG_NET_SCH_FIFO=y
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
 
 #
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
 # Device Drivers
 #
 
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
 # CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -485,6 +441,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
 # CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -510,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
 
 #
 # Mapping drivers for chip access
@@ -533,44 +489,25 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
-
-#
-# OneNAND Flash Device Drivers
-#
 # CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
 # CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -578,6 +515,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
@@ -599,6 +537,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
 # CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
 
 #
 # SCSI Transports
@@ -606,94 +545,72 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
 CONFIG_PATA_PLATFORM=y
-
-#
-# Multi-device support (RAID and LVM)
-#
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
 CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SH_ETH=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMC911X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
 # CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
 # CONFIG_PHONE is not set
 
 #
@@ -711,6 +628,7 @@ CONFIG_NETDEVICES=y
 # Character devices
 #
 # CONFIG_VT is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -728,99 +646,78 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
 # CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
 CONFIG_HW_RANDOM=m
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
 # CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
 # CONFIG_I2C is not set
-
-#
-# SPI support
-#
 # CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
 # CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
 
 #
-# Hardware Monitoring support
+# Sonics Silicon Backplane
 #
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
 # CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
 
 #
 # Multimedia devices
 #
+
+#
+# Multimedia core support
+#
 # CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multimedia drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_DAB is not set
 
 #
 # Graphics support
 #
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
-# Sound
+# Display device support
 #
-# CONFIG_SOUND is not set
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
-# USB support
+# Sound
 #
-# CONFIG_USB_ARCH_HAS_HCD is not set
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 # CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
-
-#
-# USB Gadget Support
-#
 # CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
 # CONFIG_MMC is not set
-
-#
-# LED devices
-#
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -834,40 +731,10 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 # CONFIG_LEDS_TRIGGER_TIMER is not set
 # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
+# CONFIG_UIO is not set
 
 #
 # File systems
@@ -877,20 +744,21 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 # CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
 # CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
@@ -919,7 +787,6 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -935,68 +802,67 @@ CONFIG_RAMFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
 # CONFIG_JFFS2_SUMMARY is not set
 # CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=y
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
 # CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
 
 #
 # Partition Types
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 # CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
 # CONFIG_DLM is not set
 
 #
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
@@ -1004,21 +870,28 @@ CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
 # CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_BOOTMEM is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
 # CONFIG_SH_KGDB is not set
 
 #
@@ -1026,62 +899,100 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
 
 #
-# Cryptographic options
+# Crypto core or helper
 #
-CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 CONFIG_CRYPTO_SHA1=y
 # CONFIG_CRYPTO_SHA256 is not set
 # CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
 # CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Hardware crypto devices
+# Compression
 #
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
new file mode 100644
index 000000000000..83f3fe5db3e5
--- /dev/null
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -0,0 +1,1052 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc4
+# Fri Jun  6 12:20:17 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+CONFIG_CPU_SUBTYPE_SH7763=y
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
+CONFIG_VSYSCALL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+# CONFIG_SH_STORE_QUEUES is not set
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+CONFIG_SH_SH7763RDP=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=66666666
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_HEARTBEAT is not set
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+# CONFIG_MTD_BLOCK is not set
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x8000000
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+# CONFIG_SMC91X is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
new file mode 100644
index 000000000000..ff72697365d1
--- /dev/null
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -0,0 +1,1388 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc8
+# Tue Jul 15 21:37:59 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_SYS_SUPPORTS_NUMA=y
+CONFIG_SYS_SUPPORTS_PCI=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_IO_TRAPPED=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+# CONFIG_OPROFILE is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH4=y
+CONFIG_CPU_SH4A=y
+CONFIG_CPU_SHX2=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+CONFIG_CPU_SUBTYPE_SH7785=y
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_MMU=y
+CONFIG_PAGE_OFFSET=0x80000000
+CONFIG_MEMORY_START=0x08000000
+CONFIG_MEMORY_SIZE=0x08000000
+CONFIG_29BIT=y
+# CONFIG_PMB is not set
+# CONFIG_X2TLB is not set
+CONFIG_VSYSCALL=y
+# CONFIG_NUMA is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=2
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_SH_FPU=y
+CONFIG_SH_STORE_QUEUES=y
+CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+# CONFIG_SH_HIGHLANDER is not set
+CONFIG_SH_SH7785LCR=y
+CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_TMU=y
+CONFIG_SH_TIMER_IRQ=28
+CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# DMA support
+#
+# CONFIG_SH_DMA is not set
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
+# CONFIG_CRASH_DUMP is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Bus options
+#
+CONFIG_PCI=y
+CONFIG_SH_PCIDMA_NONCOHERENT=y
+CONFIG_PCI_AUTO=y
+CONFIG_PCI_AUTO_UPDATE_RESOURCES=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_ASK_IP_FIB_HASH=y
+# CONFIG_IP_FIB_TRIE is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_MULTIPLE_TABLES is not set
+# CONFIG_IP_ROUTE_MULTIPATH is not set
+# CONFIG_IP_ROUTE_VERBOSE is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x00000000
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+CONFIG_R8169=y
+# CONFIG_R8169_NAPI is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=6
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_ALGOPCA=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+CONFIG_I2C_PCA_PLATFORM=y
+# CONFIG_I2C_SH_MOBILE is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_SM501=y
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+CONFIG_FB_SM501=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+# CONFIG_LOGO_SUPERH_CLUT224 is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+CONFIG_USB_R8A66597_HCD=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SH is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=y
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_BIND34 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+CONFIG_NLS_CODEPAGE_932=y
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DEBUG_BOOTMEM is not set
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_SH_KGDB is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c
index 0caf11bb7e27..af7bb589c2c8 100644
--- a/arch/sh/drivers/dma/dma-g2.c
+++ b/arch/sh/drivers/dma/dma-g2.c
@@ -14,8 +14,8 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <asm/cacheflush.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/dma.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
 #include <asm/dma.h>
 
 struct g2_channel {
diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c
index 838fad566eaf..391cbe1c2956 100644
--- a/arch/sh/drivers/dma/dma-pvr2.c
+++ b/arch/sh/drivers/dma/dma-pvr2.c
@@ -13,8 +13,8 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
-#include <asm/mach/sysasic.h>
-#include <asm/mach/dma.h>
+#include <mach/sysasic.h>
+#include <mach/dma.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 
diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c
index 71ff3d6f26e2..b2ffe649c7c0 100644
--- a/arch/sh/drivers/dma/dma-sh.c
+++ b/arch/sh/drivers/dma/dma-sh.c
@@ -14,7 +14,7 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
-#include <asm/dreamcast/dma.h>
+#include <mach-dreamcast/mach/dma.h>
 #include <asm/dma.h>
 #include <asm/io.h>
 #include "dma-sh.h"
diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h
index 0f591fbc922d..b05af34fc15d 100644
--- a/arch/sh/drivers/dma/dma-sh.h
+++ b/arch/sh/drivers/dma/dma-sh.h
@@ -11,7 +11,7 @@
 #ifndef __DMA_SH_H
 #define __DMA_SH_H
 
-#include <asm/cpu/dma.h>
+#include <cpu/dma.h>
 
 /* Definitions for the SuperH DMAC */
 #define REQ_L	0x00000000
diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c
index 51b57c0d1a3c..347ee11351ec 100644
--- a/arch/sh/drivers/dma/dma-sysfs.c
+++ b/arch/sh/drivers/dma/dma-sysfs.c
@@ -23,7 +23,8 @@ static struct sysdev_class dma_sysclass = {
 };
 EXPORT_SYMBOL(dma_sysclass);
 
-static ssize_t dma_show_devices(struct sys_device *dev, char *buf)
+static ssize_t dma_show_devices(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	ssize_t len = 0;
 	int i;
@@ -57,13 +58,15 @@ static int __init dma_sysclass_init(void)
 }
 postcore_initcall(dma_sysclass_init);
 
-static ssize_t dma_show_dev_id(struct sys_device *dev, char *buf)
+static ssize_t dma_show_dev_id(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
 	return sprintf(buf, "%s\n", channel->dev_id);
 }
 
 static ssize_t dma_store_dev_id(struct sys_device *dev,
+				struct sysdev_attribute *attr,
 				const char *buf, size_t count)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
@@ -74,6 +77,7 @@ static ssize_t dma_store_dev_id(struct sys_device *dev,
 static SYSDEV_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id);
 
 static ssize_t dma_store_config(struct sys_device *dev,
+				struct sysdev_attribute *attr,
 				const char *buf, size_t count)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
@@ -87,13 +91,15 @@ static ssize_t dma_store_config(struct sys_device *dev,
 
 static SYSDEV_ATTR(config, S_IWUSR, NULL, dma_store_config);
 
-static ssize_t dma_show_mode(struct sys_device *dev, char *buf)
+static ssize_t dma_show_mode(struct sys_device *dev,
+				struct sysdev_attribute *attr, char *buf)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
 	return sprintf(buf, "0x%08x\n", channel->mode);
 }
 
 static ssize_t dma_store_mode(struct sys_device *dev,
+			      struct sysdev_attribute *attr,
 			      const char *buf, size_t count)
 {
 	struct dma_channel *channel = to_dma_channel(dev);
@@ -104,7 +110,8 @@ static ssize_t dma_store_mode(struct sys_device *dev,
 static SYSDEV_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode);
 
 #define dma_ro_attr(field, fmt)						\
-static ssize_t dma_show_##field(struct sys_device *dev, char *buf)	\
+static ssize_t dma_show_##field(struct sys_device *dev, 		\
+				struct sysdev_attribute *attr, char *buf)\
 {									\
 	struct dma_channel *channel = to_dma_channel(dev);		\
 	return sprintf(buf, fmt, channel->field);			\
diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile
index 0718805774e8..847e90894d1b 100644
--- a/arch/sh/drivers/pci/Makefile
+++ b/arch/sh/drivers/pci/Makefile
@@ -23,3 +23,4 @@ obj-$(CONFIG_SH_LANDISK)		+= ops-landisk.o
 obj-$(CONFIG_SH_LBOX_RE2)		+= ops-lboxre2.o fixups-lboxre2.o
 obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= ops-se7780.o fixups-se7780.o
 obj-$(CONFIG_SH_CAYMAN)			+= ops-cayman.o
+obj-$(CONFIG_SH_SH7785LCR)		+= ops-sh7785lcr.o fixups-sh7785lcr.o
diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c
index c44699301eeb..2bf85cf091e1 100644
--- a/arch/sh/drivers/pci/fixups-dreamcast.c
+++ b/arch/sh/drivers/pci/fixups-dreamcast.c
@@ -26,7 +26,7 @@
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/mach/pci.h>
+#include <mach/pci.h>
 
 static void __init gapspci_fixup_resources(struct pci_dev *dev)
 {
diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c
new file mode 100644
index 000000000000..4949e601387a
--- /dev/null
+++ b/arch/sh/drivers/pci/fixups-sh7785lcr.c
@@ -0,0 +1,46 @@
+/*
+ * arch/sh/drivers/pci/fixups-sh7785lcr.c
+ *
+ * R0P7785LC0011RL PCI fixups
+ * Copyright (C) 2008  Yoshihiro Shimoda
+ *
+ * Based on arch/sh/drivers/pci/fixups-r7780rp.c
+ * Copyright (C) 2003  Lineo uSolutions, Inc.
+ * Copyright (C) 2004 - 2006  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+int pci_fixup_pcic(void)
+{
+	pci_write_reg(0x000043ff, SH4_PCIINTM);
+	pci_write_reg(0x0000380f, SH4_PCIAINTM);
+
+	pci_write_reg(0xfbb00047, SH7780_PCICMD);
+	pci_write_reg(0x00000000, SH7780_PCIIBAR);
+
+	pci_write_reg(0x00011912, SH7780_PCISVID);
+	pci_write_reg(0x08000000, SH7780_PCICSCR0);
+	pci_write_reg(0x0000001b, SH7780_PCICSAR0);
+	pci_write_reg(0xfd000000, SH7780_PCICSCR1);
+	pci_write_reg(0x0000000f, SH7780_PCICSAR1);
+
+	pci_write_reg(0xfd000000, SH7780_PCIMBR0);
+	pci_write_reg(0x00fc0000, SH7780_PCIMBMR0);
+
+#ifdef CONFIG_32BIT
+	pci_write_reg(0xc0000000, SH7780_PCIMBR2);
+	pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2);
+#endif
+
+	/* Set IOBR for windows containing area specified in pci.h */
+	pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)),
+		      SH7780_PCIIOBR);
+	pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR);
+
+	return 0;
+}
diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c
index 980275ffa30b..5ccf9ea3a9de 100644
--- a/arch/sh/drivers/pci/ops-cayman.c
+++ b/arch/sh/drivers/pci/ops-cayman.c
@@ -2,7 +2,7 @@
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/types.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include "pci-sh5.h"
 
 static inline u8 bridge_swizzle(u8 pin, u8 slot)
diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c
index e1284fc69361..f5d2a2aa6f3f 100644
--- a/arch/sh/drivers/pci/ops-dreamcast.c
+++ b/arch/sh/drivers/pci/ops-dreamcast.c
@@ -22,10 +22,11 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/mach/pci.h>
+#include <mach/pci.h>
 
 static struct resource gapspci_io_resource = {
 	.name	= "GAPSPCI IO",
@@ -48,6 +49,7 @@ struct pci_channel board_pci_channels[] = {
 	  &gapspci_mem_resource, 0, 1 },
 	{ 0, }
 };
+EXPORT_SYMBOL(board_pci_channels);
 
 /*
  * The !gapspci_config_access case really shouldn't happen, ever, unless
diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c
index bbdb48c124a2..3145c62484d6 100644
--- a/arch/sh/drivers/pci/ops-se7780.c
+++ b/arch/sh/drivers/pci/ops-se7780.c
@@ -13,7 +13,7 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
-#include <asm/se7780.h>
+#include <mach-se/mach/se7780.h>
 #include <asm/io.h>
 #include "pci-sh4.h"
 
diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c
new file mode 100644
index 000000000000..b3bd68702059
--- /dev/null
+++ b/arch/sh/drivers/pci/ops-sh7785lcr.c
@@ -0,0 +1,66 @@
+/*
+ * Author:  Ian DaSilva (idasilva@mvista.com)
+ *
+ * Highly leveraged from pci-bigsur.c, written by Dustin McIntire.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * PCI initialization for the Renesas R0P7785LC0011RL board
+ * Based on arch/sh/drivers/pci/ops-r7780rp.c
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include "pci-sh4.h"
+
+static char irq_tab[] __initdata = {
+	65, 66, 67, 68,
+};
+
+int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
+{
+	return irq_tab[slot];
+}
+
+static struct resource sh7785_io_resource = {
+	.name	= "SH7785_IO",
+	.start	= SH7780_PCI_IO_BASE,
+	.end	= SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1,
+	.flags	= IORESOURCE_IO
+};
+
+static struct resource sh7785_mem_resource = {
+	.name	= "SH7785_mem",
+	.start	= SH7780_PCI_MEMORY_BASE,
+	.end	= SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1,
+	.flags	= IORESOURCE_MEM
+};
+
+struct pci_channel board_pci_channels[] = {
+	{ &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff },
+	{ NULL, NULL, NULL, 0, 0 },
+};
+EXPORT_SYMBOL(board_pci_channels);
+
+static struct sh4_pci_address_map sh7785_pci_map = {
+	.window0	= {
+		.base	= SH7780_CS2_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+
+	.window1	= {
+		.base	= SH7780_CS3_BASE_ADDR,
+		.size	= 0x04000000,
+	},
+
+	.flags	= SH4_PCIC_NO_RESET,
+};
+
+int __init pcibios_init_platform(void)
+{
+	return sh7780_pcic_init(&sh7785_pci_map);
+}
diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c
index ea404704ace8..cf48b12ee58c 100644
--- a/arch/sh/drivers/pci/pci-auto.c
+++ b/arch/sh/drivers/pci/pci-auto.c
@@ -78,7 +78,7 @@ static struct pci_dev *fake_pci_dev(struct pci_channel *hose,
 }
 
 #define EARLY_PCI_OP(rw, size, type)					\
-int early_##rw##_config_##size(struct pci_channel *hose,		\
+static int early_##rw##_config_##size(struct pci_channel *hose,		\
 	int top_bus, int bus, int devfn, int offset, type value)	\
 {									\
 	return pci_##rw##_config_##size(				\
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
index a00a4df8c02d..7a97438762c8 100644
--- a/arch/sh/drivers/pci/pci-sh5.c
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -19,7 +19,7 @@
 #include <linux/delay.h>
 #include <linux/types.h>
 #include <linux/irq.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include <asm/pci.h>
 #include <asm/io.h>
 #include "pci-sh5.h"
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index 08d2e7325252..d3839e609aac 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -76,38 +76,6 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus)
 	pci_read_bridge_bases(bus);
 }
 
-void
-pcibios_update_resource(struct pci_dev *dev, struct resource *root,
-			struct resource *res, int resource)
-{
-	u32 new, check;
-	int reg;
-
-	new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
-	if (resource < 6) {
-		reg = PCI_BASE_ADDRESS_0 + 4*resource;
-	} else if (resource == PCI_ROM_RESOURCE) {
-		res->flags |= IORESOURCE_ROM_ENABLE;
-		new |= PCI_ROM_ADDRESS_ENABLE;
-		reg = dev->rom_base_reg;
-	} else {
-		/*
-		 * Somebody might have asked allocation of a non-standard
-		 * resource
-		 */
-		return;
-	}
-
-	pci_write_config_dword(dev, reg, new);
-	pci_read_config_dword(dev, reg, &check);
-	if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ?
-		PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
-		printk(KERN_ERR "PCI: Error while updating region "
-		       "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
-		       new, check);
-	}
-}
-
 void pcibios_align_resource(void *data, struct resource *res,
 			    resource_size_t size, resource_size_t align)
 			    __attribute__ ((weak));
@@ -167,7 +135,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
  *  If we set up a device for bus mastering, we need to check and set
  *  the latency timer as it may not be properly set.
  */
-unsigned int pcibios_max_latency = 255;
+static unsigned int pcibios_max_latency = 255;
 
 void pcibios_set_master(struct pci_dev *dev)
 {
diff --git a/arch/sh/include/asm/.gitignore b/arch/sh/include/asm/.gitignore
new file mode 100644
index 000000000000..378db779fb6c
--- /dev/null
+++ b/arch/sh/include/asm/.gitignore
@@ -0,0 +1 @@
+machtypes.h
diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild
new file mode 100644
index 000000000000..43910cdf78a5
--- /dev/null
+++ b/arch/sh/include/asm/Kbuild
@@ -0,0 +1,8 @@
+include include/asm-generic/Kbuild.asm
+
+header-y += cpu-features.h
+
+unifdef-y += unistd_32.h
+unifdef-y += unistd_64.h
+unifdef-y += posix_types_32.h
+unifdef-y += posix_types_64.h
diff --git a/arch/sh/include/asm/adc.h b/arch/sh/include/asm/adc.h
new file mode 100644
index 000000000000..48824c1fab80
--- /dev/null
+++ b/arch/sh/include/asm/adc.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_ADC_H
+#define __ASM_ADC_H
+#ifdef __KERNEL__
+/*
+ * Copyright (C) 2004  Andriy Skulysh
+ */
+
+#include <cpu/adc.h>
+
+int adc_single(unsigned int channel);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_ADC_H */
diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h
new file mode 100644
index 000000000000..2702d81bfc0d
--- /dev/null
+++ b/arch/sh/include/asm/addrspace.h
@@ -0,0 +1,53 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Kaz Kojima
+ *
+ * Defitions for the address spaces of the SH CPUs.
+ */
+#ifndef __ASM_SH_ADDRSPACE_H
+#define __ASM_SH_ADDRSPACE_H
+
+#ifdef __KERNEL__
+
+#include <cpu/addrspace.h>
+
+/* If this CPU supports segmentation, hook up the helpers */
+#ifdef P1SEG
+
+/*
+   [ P0/U0 (virtual) ]		0x00000000     <------ User space
+   [ P1 (fixed)   cached ]	0x80000000     <------ Kernel space
+   [ P2 (fixed)  non-cachable]	0xA0000000     <------ Physical access
+   [ P3 (virtual) cached]	0xC0000000     <------ vmalloced area
+   [ P4 control   ]		0xE0000000
+ */
+
+/* Returns the privileged segment base of a given address  */
+#define PXSEG(a)	(((unsigned long)(a)) & 0xe0000000)
+
+/* Returns the physical address of a PnSEG (n=1,2) address   */
+#define PHYSADDR(a)	(((unsigned long)(a)) & 0x1fffffff)
+
+#ifdef CONFIG_29BIT
+/*
+ * Map an address to a certain privileged segment
+ */
+#define P1SEGADDR(a)	\
+	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG))
+#define P2SEGADDR(a)	\
+	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG))
+#define P3SEGADDR(a)	\
+	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG))
+#define P4SEGADDR(a)	\
+	((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG))
+#endif /* 29BIT */
+#endif /* P1SEG */
+
+/* Check if an address can be reached in 29 bits */
+#define IS_29BIT(a)	(((unsigned long)(a)) < 0x20000000)
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_ADDRSPACE_H */
diff --git a/arch/sh/include/asm/atomic-grb.h b/arch/sh/include/asm/atomic-grb.h
new file mode 100644
index 000000000000..4c5b7dbfcedb
--- /dev/null
+++ b/arch/sh/include/asm/atomic-grb.h
@@ -0,0 +1,169 @@
+#ifndef __ASM_SH_ATOMIC_GRB_H
+#define __ASM_SH_ATOMIC_GRB_H
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+	int tmp;
+
+	__asm__ __volatile__ (
+		"   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */
+		"   add     %2,   %0      \n\t" /* add */
+		"   mov.l   %0,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (tmp),
+		  "+r"  (v)
+		: "r"   (i)
+		: "memory" , "r0", "r1");
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	int tmp;
+
+	__asm__ __volatile__ (
+		"   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   mov     r15,  r1      \n\t" /* r1 = saved sp */
+		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */
+		"   sub     %2,   %0      \n\t" /* sub */
+		"   mov.l   %0,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (tmp),
+		  "+r"  (v)
+		: "r"   (i)
+		: "memory" , "r0", "r1");
+}
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	int tmp;
+
+	__asm__ __volatile__ (
+		"   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */
+		"   add     %2,   %0      \n\t" /* add */
+		"   mov.l   %0,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (tmp),
+		  "+r"  (v)
+		: "r"   (i)
+		: "memory" , "r0", "r1");
+
+	return tmp;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	int tmp;
+
+	__asm__ __volatile__ (
+		"   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */
+		"   sub     %2,   %0      \n\t" /* sub */
+		"   mov.l   %0,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (tmp),
+		  "+r"  (v)
+		: "r"   (i)
+		: "memory", "r0", "r1");
+
+	return tmp;
+}
+
+static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
+{
+	int tmp;
+	unsigned int _mask = ~mask;
+
+	__asm__ __volatile__ (
+		"   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */
+		"   and     %2,   %0      \n\t" /* add */
+		"   mov.l   %0,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (tmp),
+		  "+r"  (v)
+		: "r"   (_mask)
+		: "memory" , "r0", "r1");
+}
+
+static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
+{
+	int tmp;
+
+	__asm__ __volatile__ (
+		"   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */
+		"   or      %2,   %0      \n\t" /* or */
+		"   mov.l   %0,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (tmp),
+		  "+r"  (v)
+		: "r"   (mask)
+		: "memory" , "r0", "r1");
+}
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+	int ret;
+
+	__asm__ __volatile__ (
+		"   .align 2		\n\t"
+		"   mova     1f,  r0	\n\t"
+		"   nop			\n\t"
+		"   mov     r15,  r1	\n\t"
+		"   mov    #-8,  r15	\n\t"
+		"   mov.l   @%1,  %0	\n\t"
+		"   cmp/eq   %2,  %0	\n\t"
+		"   bf	     1f		\n\t"
+		"   mov.l    %3, @%1	\n\t"
+		"1: mov      r1,  r15	\n\t"
+		: "=&r" (ret)
+		: "r" (v), "r" (old), "r" (new)
+		: "memory" , "r0", "r1" , "t");
+
+	return ret;
+}
+
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int ret;
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"   .align 2		\n\t"
+		"   mova    1f,   r0	\n\t"
+		"   nop			\n\t"
+		"   mov    r15,   r1	\n\t"
+		"   mov    #-12,  r15	\n\t"
+		"   mov.l  @%2,   %1	\n\t"
+		"   mov	    %1,   %0    \n\t"
+		"   cmp/eq  %4,   %0	\n\t"
+		"   bt/s    1f		\n\t"
+		"    add    %3,   %1	\n\t"
+		"   mov.l   %1,  @%2	\n\t"
+		"1: mov     r1,   r15	\n\t"
+		: "=&r" (ret), "=&r" (tmp)
+		: "r" (v), "r" (a), "r" (u)
+		: "memory" , "r0", "r1" , "t");
+
+	return ret != u;
+}
+#endif /* __ASM_SH_ATOMIC_GRB_H */
diff --git a/arch/sh/include/asm/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h
new file mode 100644
index 000000000000..74f7943cff6f
--- /dev/null
+++ b/arch/sh/include/asm/atomic-irq.h
@@ -0,0 +1,71 @@
+#ifndef __ASM_SH_ATOMIC_IRQ_H
+#define __ASM_SH_ATOMIC_IRQ_H
+
+/*
+ * To get proper branch prediction for the main line, we must branch
+ * forward to code at the end of this object's .text section, then
+ * branch back to restart the operation.
+ */
+static inline void atomic_add(int i, atomic_t *v)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*(long *)v += i;
+	local_irq_restore(flags);
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*(long *)v -= i;
+	local_irq_restore(flags);
+}
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long temp, flags;
+
+	local_irq_save(flags);
+	temp = *(long *)v;
+	temp += i;
+	*(long *)v = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long temp, flags;
+
+	local_irq_save(flags);
+	temp = *(long *)v;
+	temp -= i;
+	*(long *)v = temp;
+	local_irq_restore(flags);
+
+	return temp;
+}
+
+static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*(long *)v &= ~mask;
+	local_irq_restore(flags);
+}
+
+static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+	*(long *)v |= mask;
+	local_irq_restore(flags);
+}
+
+#endif /* __ASM_SH_ATOMIC_IRQ_H */
diff --git a/arch/sh/include/asm/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h
new file mode 100644
index 000000000000..4b00b78e3f4f
--- /dev/null
+++ b/arch/sh/include/asm/atomic-llsc.h
@@ -0,0 +1,107 @@
+#ifndef __ASM_SH_ATOMIC_LLSC_H
+#define __ASM_SH_ATOMIC_LLSC_H
+
+/*
+ * To get proper branch prediction for the main line, we must branch
+ * forward to code at the end of this object's .text section, then
+ * branch back to restart the operation.
+ */
+static inline void atomic_add(int i, atomic_t *v)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+"1:	movli.l @%2, %0		! atomic_add	\n"
+"	add	%1, %0				\n"
+"	movco.l	%0, @%2				\n"
+"	bf	1b				\n"
+	: "=&z" (tmp)
+	: "r" (i), "r" (&v->counter)
+	: "t");
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+"1:	movli.l @%2, %0		! atomic_sub	\n"
+"	sub	%1, %0				\n"
+"	movco.l	%0, @%2				\n"
+"	bf	1b				\n"
+	: "=&z" (tmp)
+	: "r" (i), "r" (&v->counter)
+	: "t");
+}
+
+/*
+ * SH-4A note:
+ *
+ * We basically get atomic_xxx_return() for free compared with
+ * atomic_xxx(). movli.l/movco.l require r0 due to the instruction
+ * encoding, so the retval is automatically set without having to
+ * do any special work.
+ */
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+	unsigned long temp;
+
+	__asm__ __volatile__ (
+"1:	movli.l @%2, %0		! atomic_add_return	\n"
+"	add	%1, %0					\n"
+"	movco.l	%0, @%2					\n"
+"	bf	1b					\n"
+"	synco						\n"
+	: "=&z" (temp)
+	: "r" (i), "r" (&v->counter)
+	: "t");
+
+	return temp;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+	unsigned long temp;
+
+	__asm__ __volatile__ (
+"1:	movli.l @%2, %0		! atomic_sub_return	\n"
+"	sub	%1, %0					\n"
+"	movco.l	%0, @%2					\n"
+"	bf	1b					\n"
+"	synco						\n"
+	: "=&z" (temp)
+	: "r" (i), "r" (&v->counter)
+	: "t");
+
+	return temp;
+}
+
+static inline void atomic_clear_mask(unsigned int mask, atomic_t *v)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+"1:	movli.l @%2, %0		! atomic_clear_mask	\n"
+"	and	%1, %0					\n"
+"	movco.l	%0, @%2					\n"
+"	bf	1b					\n"
+	: "=&z" (tmp)
+	: "r" (~mask), "r" (&v->counter)
+	: "t");
+}
+
+static inline void atomic_set_mask(unsigned int mask, atomic_t *v)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+"1:	movli.l @%2, %0		! atomic_set_mask	\n"
+"	or	%1, %0					\n"
+"	movco.l	%0, @%2					\n"
+"	bf	1b					\n"
+	: "=&z" (tmp)
+	: "r" (mask), "r" (&v->counter)
+	: "t");
+}
+
+#endif /* __ASM_SH_ATOMIC_LLSC_H */
diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h
new file mode 100644
index 000000000000..c043ef003028
--- /dev/null
+++ b/arch/sh/include/asm/atomic.h
@@ -0,0 +1,89 @@
+#ifndef __ASM_SH_ATOMIC_H
+#define __ASM_SH_ATOMIC_H
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ *
+ */
+
+typedef struct { volatile int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)	( (atomic_t) { (i) } )
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v,i)		((v)->counter = (i))
+
+#include <linux/compiler.h>
+#include <asm/system.h>
+
+#if defined(CONFIG_GUSA_RB)
+#include <asm/atomic-grb.h>
+#elif defined(CONFIG_CPU_SH4A)
+#include <asm/atomic-llsc.h>
+#else
+#include <asm/atomic-irq.h>
+#endif
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+#define atomic_dec_return(v) atomic_sub_return(1,(v))
+#define atomic_inc_return(v) atomic_add_return(1,(v))
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0)
+#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0)
+
+#define atomic_inc(v) atomic_add(1,(v))
+#define atomic_dec(v) atomic_sub(1,(v))
+
+#ifndef CONFIG_GUSA_RB
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+	int ret;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ret = v->counter;
+	if (likely(ret == old))
+		v->counter = new;
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int ret;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	ret = v->counter;
+	if (ret != u)
+		v->counter += a;
+	local_irq_restore(flags);
+
+	return ret != u;
+}
+#endif
+
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+/* Atomic operations are already serializing on SH */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#include <asm-generic/atomic.h>
+#endif /* __ASM_SH_ATOMIC_H */
diff --git a/arch/sh/include/asm/auxvec.h b/arch/sh/include/asm/auxvec.h
new file mode 100644
index 000000000000..483effd65e00
--- /dev/null
+++ b/arch/sh/include/asm/auxvec.h
@@ -0,0 +1,36 @@
+#ifndef __ASM_SH_AUXVEC_H
+#define __ASM_SH_AUXVEC_H
+
+/*
+ * Architecture-neutral AT_ values in 0-17, leave some room
+ * for more of them.
+ */
+
+/*
+ * This entry gives some information about the FPU initialization
+ * performed by the kernel.
+ */
+#define AT_FPUCW		18	/* Used FPU control word.  */
+
+#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__)
+/*
+ * Only define this in the vsyscall case, the entry point to
+ * the vsyscall page gets placed here. The kernel will attempt
+ * to build a gate VMA we don't care about otherwise..
+ */
+#define AT_SYSINFO_EHDR		33
+#endif
+
+/*
+ * More complete cache descriptions than AT_[DIU]CACHEBSIZE.  If the
+ * value is -1, then the cache doesn't exist.  Otherwise:
+ *
+ *    bit 0-3:	  Cache set-associativity; 0 means fully associative.
+ *    bit 4-7:	  Log2 of cacheline size.
+ *    bit 8-31:	  Size of the entire cache >> 8.
+ */
+#define AT_L1I_CACHESHAPE	34
+#define AT_L1D_CACHESHAPE	35
+#define AT_L2_CACHESHAPE	36
+
+#endif /* __ASM_SH_AUXVEC_H */
diff --git a/arch/sh/include/asm/bitops-grb.h b/arch/sh/include/asm/bitops-grb.h
new file mode 100644
index 000000000000..a5907b94395b
--- /dev/null
+++ b/arch/sh/include/asm/bitops-grb.h
@@ -0,0 +1,169 @@
+#ifndef __ASM_SH_BITOPS_GRB_H
+#define __ASM_SH_BITOPS_GRB_H
+
+static inline void set_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+                "   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+                "   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+                "   mov.l  @%1,   %0      \n\t" /* load  old value */
+                "   or      %2,   %0      \n\t" /* or */
+                "   mov.l   %0,   @%1     \n\t" /* store new value */
+                "1: mov     r1,   r15     \n\t" /* LOGOUT */
+                : "=&r" (tmp),
+                  "+r"  (a)
+                : "r"   (mask)
+                : "memory" , "r0", "r1");
+}
+
+static inline void clear_bit(int nr, volatile void * addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+        unsigned long tmp;
+
+	a += nr >> 5;
+        mask = ~(1 << (nr & 0x1f));
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+                "   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+                "   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+                "   mov.l  @%1,   %0      \n\t" /* load  old value */
+                "   and     %2,   %0      \n\t" /* and */
+                "   mov.l   %0,   @%1     \n\t" /* store new value */
+                "1: mov     r1,   r15     \n\t" /* LOGOUT */
+                : "=&r" (tmp),
+                  "+r"  (a)
+                : "r"   (mask)
+                : "memory" , "r0", "r1");
+}
+
+static inline void change_bit(int nr, volatile void * addr)
+{
+        int     mask;
+        volatile unsigned int *a = addr;
+        unsigned long tmp;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 0x1f);
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+                "   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+                "   mov    #-6,   r15     \n\t" /* LOGIN: r15 = size */
+                "   mov.l  @%1,   %0      \n\t" /* load  old value */
+                "   xor     %2,   %0      \n\t" /* xor */
+                "   mov.l   %0,   @%1     \n\t" /* store new value */
+                "1: mov     r1,   r15     \n\t" /* LOGOUT */
+                : "=&r" (tmp),
+                  "+r"  (a)
+                : "r"   (mask)
+                : "memory" , "r0", "r1");
+}
+
+static inline int test_and_set_bit(int nr, volatile void * addr)
+{
+        int     mask, retval;
+	volatile unsigned int *a = addr;
+        unsigned long tmp;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+                "   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+                "   mov   #-14,   r15     \n\t" /* LOGIN: r15 = size */
+                "   mov.l  @%2,   %0      \n\t" /* load old value */
+                "   mov     %0,   %1      \n\t"
+                "   tst     %1,   %3      \n\t" /* T = ((*a & mask) == 0) */
+                "   mov    #-1,   %1      \n\t" /* retvat = -1 */
+                "   negc    %1,   %1      \n\t" /* retval = (mask & *a) != 0 */
+                "   or      %3,   %0      \n\t"
+                "   mov.l   %0,  @%2      \n\t" /* store new value */
+                "1: mov     r1,  r15      \n\t" /* LOGOUT */
+                : "=&r" (tmp),
+                  "=&r" (retval),
+                  "+r"  (a)
+                : "r"   (mask)
+                : "memory" , "r0", "r1" ,"t");
+
+        return retval;
+}
+
+static inline int test_and_clear_bit(int nr, volatile void * addr)
+{
+        int     mask, retval,not_mask;
+        volatile unsigned int *a = addr;
+        unsigned long tmp;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 0x1f);
+
+	not_mask = ~mask;
+
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov   #-14,   r15     \n\t" /* LOGIN */
+		"   mov.l  @%2,   %0      \n\t" /* load old value */
+                "   mov     %0,   %1      \n\t" /* %1 = *a */
+                "   tst     %1,   %3      \n\t" /* T = ((*a & mask) == 0) */
+		"   mov    #-1,   %1      \n\t" /* retvat = -1 */
+                "   negc    %1,   %1      \n\t" /* retval = (mask & *a) != 0 */
+                "   and     %4,   %0      \n\t"
+                "   mov.l   %0,  @%2      \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (tmp),
+		  "=&r" (retval),
+		  "+r"  (a)
+		: "r"   (mask),
+		  "r"   (not_mask)
+		: "memory" , "r0", "r1", "t");
+
+        return retval;
+}
+
+static inline int test_and_change_bit(int nr, volatile void * addr)
+{
+        int     mask, retval;
+        volatile unsigned int *a = addr;
+        unsigned long tmp;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 0x1f);
+
+        __asm__ __volatile__ (
+                "   .align 2              \n\t"
+                "   mova    1f,   r0      \n\t" /* r0 = end point */
+                "   mov    r15,   r1      \n\t" /* r1 = saved sp */
+                "   mov   #-14,   r15     \n\t" /* LOGIN */
+                "   mov.l  @%2,   %0      \n\t" /* load old value */
+                "   mov     %0,   %1      \n\t" /* %1 = *a */
+                "   tst     %1,   %3      \n\t" /* T = ((*a & mask) == 0) */
+                "   mov    #-1,   %1      \n\t" /* retvat = -1 */
+                "   negc    %1,   %1      \n\t" /* retval = (mask & *a) != 0 */
+                "   xor     %3,   %0      \n\t"
+                "   mov.l   %0,  @%2      \n\t" /* store new value */
+                "1: mov     r1,   r15     \n\t" /* LOGOUT */
+                : "=&r" (tmp),
+                  "=&r" (retval),
+                  "+r"  (a)
+                : "r"   (mask)
+                : "memory" , "r0", "r1", "t");
+
+        return retval;
+}
+#endif /* __ASM_SH_BITOPS_GRB_H */
diff --git a/arch/sh/include/asm/bitops-irq.h b/arch/sh/include/asm/bitops-irq.h
new file mode 100644
index 000000000000..653a12750584
--- /dev/null
+++ b/arch/sh/include/asm/bitops-irq.h
@@ -0,0 +1,91 @@
+#ifndef __ASM_SH_BITOPS_IRQ_H
+#define __ASM_SH_BITOPS_IRQ_H
+
+static inline void set_bit(int nr, volatile void *addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	*a |= mask;
+	local_irq_restore(flags);
+}
+
+static inline void clear_bit(int nr, volatile void *addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	*a &= ~mask;
+	local_irq_restore(flags);
+}
+
+static inline void change_bit(int nr, volatile void *addr)
+{
+	int	mask;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	*a ^= mask;
+	local_irq_restore(flags);
+}
+
+static inline int test_and_set_bit(int nr, volatile void *addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a |= mask;
+	local_irq_restore(flags);
+
+	return retval;
+}
+
+static inline int test_and_clear_bit(int nr, volatile void *addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a &= ~mask;
+	local_irq_restore(flags);
+
+	return retval;
+}
+
+static inline int test_and_change_bit(int nr, volatile void *addr)
+{
+	int	mask, retval;
+	volatile unsigned int *a = addr;
+	unsigned long flags;
+
+	a += nr >> 5;
+	mask = 1 << (nr & 0x1f);
+	local_irq_save(flags);
+	retval = (mask & *a) != 0;
+	*a ^= mask;
+	local_irq_restore(flags);
+
+	return retval;
+}
+
+#endif /* __ASM_SH_BITOPS_IRQ_H */
diff --git a/arch/sh/include/asm/bitops.h b/arch/sh/include/asm/bitops.h
new file mode 100644
index 000000000000..d7d382f63ee5
--- /dev/null
+++ b/arch/sh/include/asm/bitops.h
@@ -0,0 +1,103 @@
+#ifndef __ASM_SH_BITOPS_H
+#define __ASM_SH_BITOPS_H
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <asm/system.h>
+/* For __swab32 */
+#include <asm/byteorder.h>
+
+#ifdef CONFIG_GUSA_RB
+#include <asm/bitops-grb.h>
+#else
+#include <asm/bitops-irq.h>
+#endif
+
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+
+#include <asm-generic/bitops/non-atomic.h>
+
+#ifdef CONFIG_SUPERH32
+static inline unsigned long ffz(unsigned long word)
+{
+	unsigned long result;
+
+	__asm__("1:\n\t"
+		"shlr	%1\n\t"
+		"bt/s	1b\n\t"
+		" add	#1, %0"
+		: "=r" (result), "=r" (word)
+		: "0" (~0L), "1" (word)
+		: "t");
+	return result;
+}
+
+/**
+ * __ffs - find first bit in word.
+ * @word: The word to search
+ *
+ * Undefined if no bit exists, so code should check against 0 first.
+ */
+static inline unsigned long __ffs(unsigned long word)
+{
+	unsigned long result;
+
+	__asm__("1:\n\t"
+		"shlr	%1\n\t"
+		"bf/s	1b\n\t"
+		" add	#1, %0"
+		: "=r" (result), "=r" (word)
+		: "0" (~0L), "1" (word)
+		: "t");
+	return result;
+}
+#else
+static inline unsigned long ffz(unsigned long word)
+{
+	unsigned long result, __d2, __d3;
+
+        __asm__("gettr  tr0, %2\n\t"
+                "pta    $+32, tr0\n\t"
+                "andi   %1, 1, %3\n\t"
+                "beq    %3, r63, tr0\n\t"
+                "pta    $+4, tr0\n"
+                "0:\n\t"
+                "shlri.l        %1, 1, %1\n\t"
+                "addi   %0, 1, %0\n\t"
+                "andi   %1, 1, %3\n\t"
+                "beqi   %3, 1, tr0\n"
+                "1:\n\t"
+                "ptabs  %2, tr0\n\t"
+                : "=r" (result), "=r" (word), "=r" (__d2), "=r" (__d3)
+                : "0" (0L), "1" (word));
+
+	return result;
+}
+
+#include <asm-generic/bitops/__ffs.h>
+#endif
+
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_BITOPS_H */
diff --git a/arch/sh/include/asm/bug.h b/arch/sh/include/asm/bug.h
new file mode 100644
index 000000000000..c01718040166
--- /dev/null
+++ b/arch/sh/include/asm/bug.h
@@ -0,0 +1,79 @@
+#ifndef __ASM_SH_BUG_H
+#define __ASM_SH_BUG_H
+
+#define TRAPA_BUG_OPCODE	0xc33e	/* trapa #0x3e */
+
+#ifdef CONFIG_GENERIC_BUG
+#define HAVE_ARCH_BUG
+#define HAVE_ARCH_WARN_ON
+
+/**
+ * _EMIT_BUG_ENTRY
+ * %1 - __FILE__
+ * %2 - __LINE__
+ * %3 - trap type
+ * %4 - sizeof(struct bug_entry)
+ *
+ * The trapa opcode itself sits in %0.
+ * The %O notation is used to avoid # generation.
+ *
+ * The offending file and line are encoded in the __bug_table section.
+ */
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#define _EMIT_BUG_ENTRY				\
+	"\t.pushsection __bug_table,\"a\"\n"	\
+	"2:\t.long 1b, %O1\n"			\
+	"\t.short %O2, %O3\n"			\
+	"\t.org 2b+%O4\n"			\
+	"\t.popsection\n"
+#else
+#define _EMIT_BUG_ENTRY				\
+	"\t.pushsection __bug_table,\"a\"\n"	\
+	"2:\t.long 1b\n"			\
+	"\t.short %O3\n"			\
+	"\t.org 2b+%O4\n"			\
+	"\t.popsection\n"
+#endif
+
+#define BUG()						\
+do {							\
+	__asm__ __volatile__ (				\
+		"1:\t.short %O0\n"			\
+		_EMIT_BUG_ENTRY				\
+		 :					\
+		 : "n" (TRAPA_BUG_OPCODE),		\
+		   "i" (__FILE__),			\
+		   "i" (__LINE__), "i" (0),		\
+		   "i" (sizeof(struct bug_entry)));	\
+} while (0)
+
+#define __WARN()					\
+do {							\
+	__asm__ __volatile__ (				\
+		"1:\t.short %O0\n"			\
+		 _EMIT_BUG_ENTRY			\
+		 :					\
+		 : "n" (TRAPA_BUG_OPCODE),		\
+		   "i" (__FILE__),			\
+		   "i" (__LINE__),			\
+		   "i" (BUGFLAG_WARNING),		\
+		   "i" (sizeof(struct bug_entry)));	\
+} while (0)
+
+#define WARN_ON(x) ({						\
+	int __ret_warn_on = !!(x);				\
+	if (__builtin_constant_p(__ret_warn_on)) {		\
+		if (__ret_warn_on)				\
+			__WARN();				\
+	} else {						\
+		if (unlikely(__ret_warn_on))			\
+			__WARN();				\
+	}							\
+	unlikely(__ret_warn_on);				\
+})
+
+#endif /* CONFIG_GENERIC_BUG */
+
+#include <asm-generic/bug.h>
+
+#endif /* __ASM_SH_BUG_H */
diff --git a/arch/sh/include/asm/bugs.h b/arch/sh/include/asm/bugs.h
new file mode 100644
index 000000000000..121b2ecddfc3
--- /dev/null
+++ b/arch/sh/include/asm/bugs.h
@@ -0,0 +1,73 @@
+#ifndef __ASM_SH_BUGS_H
+#define __ASM_SH_BUGS_H
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+/*
+ * I don't know of any Super-H bugs yet.
+ */
+
+#include <asm/processor.h>
+
+static void __init check_bugs(void)
+{
+	extern unsigned long loops_per_jiffy;
+	char *p = &init_utsname()->machine[2]; /* "sh" */
+
+	current_cpu_data.loops_per_jiffy = loops_per_jiffy;
+
+	switch (current_cpu_data.type) {
+	case CPU_SH7619:
+		*p++ = '2';
+		break;
+	case CPU_SH7203 ... CPU_MXG:
+		*p++ = '2';
+		*p++ = 'a';
+		break;
+	case CPU_SH7705 ... CPU_SH7729:
+		*p++ = '3';
+		break;
+	case CPU_SH7750 ... CPU_SH4_501:
+		*p++ = '4';
+		break;
+	case CPU_SH7763 ... CPU_SHX3:
+		*p++ = '4';
+		*p++ = 'a';
+		break;
+	case CPU_SH7343 ... CPU_SH7366:
+		*p++ = '4';
+		*p++ = 'a';
+		*p++ = 'l';
+		*p++ = '-';
+		*p++ = 'd';
+		*p++ = 's';
+		*p++ = 'p';
+		break;
+	case CPU_SH5_101 ... CPU_SH5_103:
+		*p++ = '6';
+		*p++ = '4';
+		break;
+	case CPU_SH_NONE:
+		/*
+		 * Specifically use CPU_SH_NONE rather than default:,
+		 * so we're able to have the compiler whine about
+		 * unhandled enumerations.
+		 */
+		break;
+	}
+
+	printk("CPU: %s\n", get_cpu_subtype(&current_cpu_data));
+
+#ifndef __LITTLE_ENDIAN__
+	/* 'eb' means 'Endian Big' */
+	*p++ = 'e';
+	*p++ = 'b';
+#endif
+	*p = '\0';
+}
+#endif /* __ASM_SH_BUGS_H */
diff --git a/arch/sh/include/asm/byteorder.h b/arch/sh/include/asm/byteorder.h
new file mode 100644
index 000000000000..4c13e6117563
--- /dev/null
+++ b/arch/sh/include/asm/byteorder.h
@@ -0,0 +1,70 @@
+#ifndef __ASM_SH_BYTEORDER_H
+#define __ASM_SH_BYTEORDER_H
+
+/*
+ * Copyright (C) 1999  Niibe Yutaka
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ */
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+static inline __attribute_const__ __u32 ___arch__swab32(__u32 x)
+{
+	__asm__(
+#ifdef __SH5__
+		"byterev	%0, %0\n\t"
+		"shari		%0, 32, %0"
+#else
+		"swap.b		%0, %0\n\t"
+		"swap.w		%0, %0\n\t"
+		"swap.b		%0, %0"
+#endif
+		: "=r" (x)
+		: "0" (x));
+
+	return x;
+}
+
+static inline __attribute_const__ __u16 ___arch__swab16(__u16 x)
+{
+	__asm__(
+#ifdef __SH5__
+		"byterev	%0, %0\n\t"
+		"shari		%0, 32, %0"
+#else
+		"swap.b		%0, %0"
+#endif
+		: "=r" (x)
+		:  "0" (x));
+
+	return x;
+}
+
+static inline __u64 ___arch__swab64(__u64 val)
+{
+	union {
+		struct { __u32 a,b; } s;
+		__u64 u;
+	} v, w;
+	v.u = val;
+	w.s.b = ___arch__swab32(v.s.a);
+	w.s.a = ___arch__swab32(v.s.b);
+	return w.u;
+}
+
+#define __arch__swab64(x) ___arch__swab64(x)
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab16(x) ___arch__swab16(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#ifdef __LITTLE_ENDIAN__
+#include <linux/byteorder/little_endian.h>
+#else
+#include <linux/byteorder/big_endian.h>
+#endif
+
+#endif /* __ASM_SH_BYTEORDER_H */
diff --git a/arch/sh/include/asm/cache.h b/arch/sh/include/asm/cache.h
new file mode 100644
index 000000000000..02df18ea9608
--- /dev/null
+++ b/arch/sh/include/asm/cache.h
@@ -0,0 +1,51 @@
+/* $Id: cache.h,v 1.6 2004/03/11 18:08:05 lethal Exp $
+ *
+ * include/asm-sh/cache.h
+ *
+ * Copyright 1999 (C) Niibe Yutaka
+ * Copyright 2002, 2003 (C) Paul Mundt
+ */
+#ifndef __ASM_SH_CACHE_H
+#define __ASM_SH_CACHE_H
+#ifdef __KERNEL__
+
+#include <linux/init.h>
+#include <cpu/cache.h>
+
+#define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
+
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
+#ifndef __ASSEMBLY__
+struct cache_info {
+	unsigned int ways;		/* Number of cache ways */
+	unsigned int sets;		/* Number of cache sets */
+	unsigned int linesz;		/* Cache line size (bytes) */
+
+	unsigned int way_size;		/* sets * line size */
+
+	/*
+	 * way_incr is the address offset for accessing the next way
+	 * in memory mapped cache array ops.
+	 */
+	unsigned int way_incr;
+	unsigned int entry_shift;
+	unsigned int entry_mask;
+
+	/*
+	 * Compute a mask which selects the address bits which overlap between
+	 * 1. those used to select the cache set during indexing
+	 * 2. those in the physical page number.
+	 */
+	unsigned int alias_mask;
+
+	unsigned int n_aliases;		/* Number of aliases */
+
+	unsigned long flags;
+};
+
+int __init detect_cpu_and_cache_system(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_CACHE_H */
diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h
new file mode 100644
index 000000000000..09acbc32d6c7
--- /dev/null
+++ b/arch/sh/include/asm/cacheflush.h
@@ -0,0 +1,81 @@
+#ifndef __ASM_SH_CACHEFLUSH_H
+#define __ASM_SH_CACHEFLUSH_H
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_CACHE_OFF
+/*
+ * Nothing to do when the cache is disabled, initial flush and explicit
+ * disabling is handled at CPU init time.
+ *
+ * See arch/sh/kernel/cpu/init.c:cache_init().
+ */
+#define p3_cache_init()				do { } while (0)
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_cache_sigtramp(vaddr)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define __flush_wback_region(start, size)	do { (void)(start); } while (0)
+#define __flush_purge_region(start, size)	do { (void)(start); } while (0)
+#define __flush_invalidate_region(start, size)	do { (void)(start); } while (0)
+#else
+#include <cpu/cacheflush.h>
+
+/*
+ * Consistent DMA requires that the __flush_xxx() primitives must be set
+ * for any of the enabled non-coherent caches (most of the UP CPUs),
+ * regardless of PIPT or VIPT cache configurations.
+ */
+
+/* Flush (write-back only) a region (smaller than a page) */
+extern void __flush_wback_region(void *start, int size);
+/* Flush (write-back & invalidate) a region (smaller than a page) */
+extern void __flush_purge_region(void *start, int size);
+/* Flush (invalidate only) a region (smaller than a page) */
+extern void __flush_invalidate_region(void *start, int size);
+#endif
+
+#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
+static inline void flush_kernel_dcache_page(struct page *page)
+{
+	flush_dcache_page(page);
+}
+
+#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_CACHE_OFF)
+extern void copy_to_user_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long vaddr, void *dst, const void *src,
+	unsigned long len);
+
+extern void copy_from_user_page(struct vm_area_struct *vma,
+	struct page *page, unsigned long vaddr, void *dst, const void *src,
+	unsigned long len);
+#else
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)	\
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+		flush_icache_user_range(vma, page, vaddr, len);	\
+	} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len)	\
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+#endif
+
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+#define HAVE_ARCH_UNMAPPED_AREA
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_CACHEFLUSH_H */
diff --git a/arch/sh/include/asm/checksum.h b/arch/sh/include/asm/checksum.h
new file mode 100644
index 000000000000..67496ab0ef04
--- /dev/null
+++ b/arch/sh/include/asm/checksum.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_SUPERH32
+# include "checksum_32.h"
+#else
+# include "checksum_64.h"
+#endif
diff --git a/arch/sh/include/asm/checksum_32.h b/arch/sh/include/asm/checksum_32.h
new file mode 100644
index 000000000000..14b7ac2f0a07
--- /dev/null
+++ b/arch/sh/include/asm/checksum_32.h
@@ -0,0 +1,215 @@
+#ifndef __ASM_SH_CHECKSUM_H
+#define __ASM_SH_CHECKSUM_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Kaz Kojima & Niibe Yutaka
+ */
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums, and handles user-space pointer exceptions correctly, when needed.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst,
+					    int len, __wsum sum,
+					    int *src_err_ptr, int *dst_err_ptr);
+
+/*
+ *	Note: when you get a NULL pointer exception here this means someone
+ *	passed in an incorrect kernel address to one of these functions.
+ *
+ *	If you use these functions directly please don't forget the
+ *	access_ok().
+ */
+static inline
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+				 int len, __wsum sum)
+{
+	return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL);
+}
+
+static inline
+__wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+				   int len, __wsum sum, int *err_ptr)
+{
+	return csum_partial_copy_generic((__force const void *)src, dst,
+					len, sum, err_ptr, NULL);
+}
+
+/*
+ *	Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int __dummy;
+	__asm__("swap.w %0, %1\n\t"
+		"extu.w	%0, %0\n\t"
+		"extu.w	%1, %1\n\t"
+		"add	%1, %0\n\t"
+		"swap.w	%0, %1\n\t"
+		"add	%1, %0\n\t"
+		"not	%0, %0\n\t"
+		: "=r" (sum), "=&r" (__dummy)
+		: "0" (sum)
+		: "t");
+	return (__force __sum16)sum;
+}
+
+/*
+ *	This is a version of ip_compute_csum() optimized for IP headers,
+ *	which always checksum on 4 octet boundaries.
+ *
+ *      i386 version by Jorge Cwik <jorge@laser.satlink.net>, adapted
+ *      for linux by * Arnt Gulbrandsen.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	unsigned int sum, __dummy0, __dummy1;
+
+	__asm__ __volatile__(
+		"mov.l	@%1+, %0\n\t"
+		"mov.l	@%1+, %3\n\t"
+		"add	#-2, %2\n\t"
+		"clrt\n\t"
+		"1:\t"
+		"addc	%3, %0\n\t"
+		"movt	%4\n\t"
+		"mov.l	@%1+, %3\n\t"
+		"dt	%2\n\t"
+		"bf/s	1b\n\t"
+		" cmp/eq #1, %4\n\t"
+		"addc	%3, %0\n\t"
+		"addc	%2, %0"	    /* Here %2 is 0, add carry-bit */
+	/* Since the input registers which are loaded with iph and ihl
+	   are modified, we must also specify them as outputs, or gcc
+	   will assume they contain their original values. */
+	: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1)
+	: "1" (iph), "2" (ihl)
+	: "t", "memory");
+
+	return	csum_fold(sum);
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+					unsigned short len,
+					unsigned short proto,
+					__wsum sum)
+{
+#ifdef __LITTLE_ENDIAN__
+	unsigned long len_proto = (proto + len) << 8;
+#else
+	unsigned long len_proto = proto + len;
+#endif
+	__asm__("clrt\n\t"
+		"addc	%0, %1\n\t"
+		"addc	%2, %1\n\t"
+		"addc	%3, %1\n\t"
+		"movt	%0\n\t"
+		"add	%1, %0"
+		: "=r" (sum), "=r" (len_proto)
+		: "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum)
+		: "t");
+
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+					unsigned short len,
+					unsigned short proto,
+					__wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+    return csum_fold(csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+				      const struct in6_addr *daddr,
+				      __u32 len, unsigned short proto,
+				      __wsum sum)
+{
+	unsigned int __dummy;
+	__asm__("clrt\n\t"
+		"mov.l	@(0,%2), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(4,%2), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(8,%2), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(12,%2), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(0,%3), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(4,%3), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(8,%3), %1\n\t"
+		"addc	%1, %0\n\t"
+		"mov.l	@(12,%3), %1\n\t"
+		"addc	%1, %0\n\t"
+		"addc	%4, %0\n\t"
+		"addc	%5, %0\n\t"
+		"movt	%1\n\t"
+		"add	%1, %0\n"
+		: "=r" (sum), "=&r" (__dummy)
+		: "r" (saddr), "r" (daddr),
+		  "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
+		: "t");
+
+	return csum_fold(sum);
+}
+
+/*
+ *	Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+static inline __wsum csum_and_copy_to_user(const void *src,
+					   void __user *dst,
+					   int len, __wsum sum,
+					   int *err_ptr)
+{
+	if (access_ok(VERIFY_WRITE, dst, len))
+		return csum_partial_copy_generic((__force const void *)src,
+						dst, len, sum, NULL, err_ptr);
+
+	if (len)
+		*err_ptr = -EFAULT;
+
+	return (__force __wsum)-1; /* invalid checksum */
+}
+#endif /* __ASM_SH_CHECKSUM_H */
diff --git a/arch/sh/include/asm/checksum_64.h b/arch/sh/include/asm/checksum_64.h
new file mode 100644
index 000000000000..9c62a031a8f5
--- /dev/null
+++ b/arch/sh/include/asm/checksum_64.h
@@ -0,0 +1,78 @@
+#ifndef __ASM_SH_CHECKSUM_64_H
+#define __ASM_SH_CHECKSUM_64_H
+
+/*
+ * include/asm-sh/checksum_64.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ *	Note: when you get a NULL pointer exception here this means someone
+ *	passed in an incorrect kernel address to one of these functions.
+ *
+ *	If you use these functions directly please don't forget the
+ *	access_ok().
+ */
+
+
+__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len,
+				       __wsum sum);
+
+__wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+					 int len, __wsum sum, int *err_ptr);
+
+static inline __sum16 csum_fold(__wsum csum)
+{
+	u32 sum = (__force u32)csum;
+        sum = (sum & 0xffff) + (sum >> 16);
+        sum = (sum & 0xffff) + (sum >> 16);
+        return (__force __sum16)~sum;
+}
+
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+				 unsigned short len, unsigned short proto,
+				 __wsum sum);
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* __ASM_SH_CHECKSUM_64_H */
diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h
new file mode 100644
index 000000000000..720dfab7b15e
--- /dev/null
+++ b/arch/sh/include/asm/clock.h
@@ -0,0 +1,97 @@
+#ifndef __ASM_SH_CLOCK_H
+#define __ASM_SH_CLOCK_H
+
+#include <linux/kref.h>
+#include <linux/list.h>
+#include <linux/seq_file.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+struct clk;
+
+struct clk_ops {
+	void (*init)(struct clk *clk);
+	void (*enable)(struct clk *clk);
+	void (*disable)(struct clk *clk);
+	void (*recalc)(struct clk *clk);
+	int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id);
+	long (*round_rate)(struct clk *clk, unsigned long rate);
+};
+
+struct clk {
+	struct list_head	node;
+	const char		*name;
+	int			id;
+	struct module		*owner;
+
+	struct clk		*parent;
+	struct clk_ops		*ops;
+
+	struct kref		kref;
+
+	unsigned long		rate;
+	unsigned long		flags;
+	unsigned long		arch_flags;
+};
+
+#define CLK_ALWAYS_ENABLED	(1 << 0)
+#define CLK_RATE_PROPAGATES	(1 << 1)
+
+/* Should be defined by processor-specific code */
+void arch_init_clk_ops(struct clk_ops **, int type);
+
+/* arch/sh/kernel/cpu/clock.c */
+int clk_init(void);
+
+void clk_recalc_rate(struct clk *);
+
+int clk_register(struct clk *);
+void clk_unregister(struct clk *);
+
+static inline int clk_always_enable(const char *id)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = clk_get(NULL, id);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	ret = clk_enable(clk);
+	if (ret)
+		clk_put(clk);
+
+	return ret;
+}
+
+/* the exported API, in addition to clk_set_rate */
+/**
+ * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter
+ * @clk: clock source
+ * @rate: desired clock rate in Hz
+ * @algo_id: algorithm id to be passed down to ops->set_rate
+ *
+ * Returns success (0) or negative errno.
+ */
+int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id);
+
+enum clk_sh_algo_id {
+	NO_CHANGE = 0,
+
+	IUS_N1_N1,
+	IUS_322,
+	IUS_522,
+	IUS_N11,
+
+	SB_N1,
+
+	SB3_N1,
+	SB3_32,
+	SB3_43,
+	SB3_54,
+
+	BP_N1,
+
+	IP_N1,
+};
+#endif /* __ASM_SH_CLOCK_H */
diff --git a/arch/sh/include/asm/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h
new file mode 100644
index 000000000000..e2681abe764f
--- /dev/null
+++ b/arch/sh/include/asm/cmpxchg-grb.h
@@ -0,0 +1,70 @@
+#ifndef __ASM_SH_CMPXCHG_GRB_H
+#define __ASM_SH_CMPXCHG_GRB_H
+
+static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__ (
+		"   .align 2              \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   nop                   \n\t"
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-4,   r15     \n\t" /* LOGIN */
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */
+		"   mov.l   %2,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (retval),
+		  "+r"  (m)
+		: "r"   (val)
+		: "memory", "r0", "r1");
+
+	return retval;
+}
+
+static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__ (
+		"   .align  2             \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-6,   r15     \n\t" /* LOGIN */
+		"   mov.b  @%1,   %0      \n\t" /* load  old value */
+		"   extu.b  %0,   %0      \n\t" /* extend as unsigned */
+		"   mov.b   %2,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (retval),
+		  "+r"  (m)
+		: "r"   (val)
+		: "memory" , "r0", "r1");
+
+	return retval;
+}
+
+static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
+					  unsigned long new)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__ (
+		"   .align  2             \n\t"
+		"   mova    1f,   r0      \n\t" /* r0 = end point */
+		"   nop                   \n\t"
+		"   mov    r15,   r1      \n\t" /* r1 = saved sp */
+		"   mov    #-8,   r15     \n\t" /* LOGIN */
+		"   mov.l  @%1,   %0      \n\t" /* load  old value */
+		"   cmp/eq  %0,   %2      \n\t"
+		"   bf            1f      \n\t" /* if not equal */
+		"   mov.l   %2,   @%1     \n\t" /* store new value */
+		"1: mov     r1,   r15     \n\t" /* LOGOUT */
+		: "=&r" (retval),
+		  "+r"  (m)
+		: "r"   (new)
+		: "memory" , "r0", "r1", "t");
+
+	return retval;
+}
+
+#endif /* __ASM_SH_CMPXCHG_GRB_H */
diff --git a/arch/sh/include/asm/cmpxchg-irq.h b/arch/sh/include/asm/cmpxchg-irq.h
new file mode 100644
index 000000000000..43049ec0554b
--- /dev/null
+++ b/arch/sh/include/asm/cmpxchg-irq.h
@@ -0,0 +1,40 @@
+#ifndef __ASM_SH_CMPXCHG_IRQ_H
+#define __ASM_SH_CMPXCHG_IRQ_H
+
+static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val)
+{
+	unsigned long flags, retval;
+
+	local_irq_save(flags);
+	retval = *m;
+	*m = val;
+	local_irq_restore(flags);
+	return retval;
+}
+
+static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val)
+{
+	unsigned long flags, retval;
+
+	local_irq_save(flags);
+	retval = *m;
+	*m = val & 0xff;
+	local_irq_restore(flags);
+	return retval;
+}
+
+static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old,
+	unsigned long new)
+{
+	__u32 retval;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	retval = *m;
+	if (retval == old)
+		*m = new;
+	local_irq_restore(flags);       /* implies memory barrier  */
+	return retval;
+}
+
+#endif /* __ASM_SH_CMPXCHG_IRQ_H */
diff --git a/arch/sh/include/asm/cpu-features.h b/arch/sh/include/asm/cpu-features.h
new file mode 100644
index 000000000000..86308aa39731
--- /dev/null
+++ b/arch/sh/include/asm/cpu-features.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_SH_CPU_FEATURES_H
+#define __ASM_SH_CPU_FEATURES_H
+
+/*
+ * Processor flags
+ *
+ * Note: When adding a new flag, keep cpu_flags[] in
+ * arch/sh/kernel/setup.c in sync so symbolic name
+ * mapping of the processor flags has a chance of being
+ * reasonably accurate.
+ *
+ * These flags are also available through the ELF
+ * auxiliary vector as AT_HWCAP.
+ */
+#define CPU_HAS_FPU		0x0001	/* Hardware FPU support */
+#define CPU_HAS_P2_FLUSH_BUG	0x0002	/* Need to flush the cache in P2 area */
+#define CPU_HAS_MMU_PAGE_ASSOC	0x0004	/* SH3: TLB way selection bit support */
+#define CPU_HAS_DSP		0x0008	/* SH-DSP: DSP support */
+#define CPU_HAS_PERF_COUNTER	0x0010	/* Hardware performance counters */
+#define CPU_HAS_PTEA		0x0020	/* PTEA register */
+#define CPU_HAS_LLSC		0x0040	/* movli.l/movco.l */
+#define CPU_HAS_L2_CACHE	0x0080	/* Secondary cache / URAM */
+#define CPU_HAS_OP32		0x0100	/* 32-bit instruction support */
+
+#endif /* __ASM_SH_CPU_FEATURES_H */
diff --git a/arch/sh/include/asm/cputime.h b/arch/sh/include/asm/cputime.h
new file mode 100644
index 000000000000..6ca395d1393e
--- /dev/null
+++ b/arch/sh/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __SH_CPUTIME_H
+#define __SH_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __SH_CPUTIME_H */
diff --git a/arch/sh/include/asm/current.h b/arch/sh/include/asm/current.h
new file mode 100644
index 000000000000..62b63880b333
--- /dev/null
+++ b/arch/sh/include/asm/current.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_SH_CURRENT_H
+#define __ASM_SH_CURRENT_H
+
+/*
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ */
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static __inline__ struct task_struct * get_current(void)
+{
+	return current_thread_info()->task;
+}
+
+#define current get_current()
+
+#endif /* __ASM_SH_CURRENT_H */
diff --git a/arch/sh/include/asm/delay.h b/arch/sh/include/asm/delay.h
new file mode 100644
index 000000000000..4b16bf9b56bd
--- /dev/null
+++ b/arch/sh/include/asm/delay.h
@@ -0,0 +1,26 @@
+#ifndef __ASM_SH_DELAY_H
+#define __ASM_SH_DELAY_H
+
+/*
+ * Copyright (C) 1993 Linus Torvalds
+ *
+ * Delay routines calling functions in arch/sh/lib/delay.c
+ */
+
+extern void __bad_udelay(void);
+extern void __bad_ndelay(void);
+
+extern void __udelay(unsigned long usecs);
+extern void __ndelay(unsigned long nsecs);
+extern void __const_udelay(unsigned long xloops);
+extern void __delay(unsigned long loops);
+
+#define udelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \
+	__udelay(n))
+
+#define ndelay(n) (__builtin_constant_p(n) ? \
+	((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
+	__ndelay(n))
+
+#endif /* __ASM_SH_DELAY_H */
diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h
new file mode 100644
index 000000000000..efd511d0803a
--- /dev/null
+++ b/arch/sh/include/asm/device.h
@@ -0,0 +1,12 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
+struct platform_device;
+/* allocate contiguous memory chunk and fill in struct resource */
+int platform_resource_setup_memory(struct platform_device *pdev,
+				   char *name, unsigned long memsize);
+
diff --git a/arch/sh/include/asm/div64.h b/arch/sh/include/asm/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/arch/sh/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..627315ecdb52
--- /dev/null
+++ b/arch/sh/include/asm/dma-mapping.h
@@ -0,0 +1,193 @@
+#ifndef __ASM_SH_DMA_MAPPING_H
+#define __ASM_SH_DMA_MAPPING_H
+
+#include <linux/mm.h>
+#include <linux/scatterlist.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+#include <asm-generic/dma-coherent.h>
+
+extern struct bus_type pci_bus_type;
+
+#define dma_supported(dev, mask)	(1)
+
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+	if (!dev->dma_mask || !dma_supported(dev, mask))
+		return -EIO;
+
+	*dev->dma_mask = mask;
+
+	return 0;
+}
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+			 dma_addr_t *dma_handle, gfp_t flag);
+
+void dma_free_coherent(struct device *dev, size_t size,
+		       void *vaddr, dma_addr_t dma_handle);
+
+void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+		    enum dma_data_direction dir);
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h) (1)
+
+static inline dma_addr_t dma_map_single(struct device *dev,
+					void *ptr, size_t size,
+					enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+	if (dev->bus == &pci_bus_type)
+		return virt_to_phys(ptr);
+#endif
+	dma_cache_sync(dev, ptr, size, dir);
+
+	return virt_to_phys(ptr);
+}
+
+#define dma_unmap_single(dev, addr, size, dir)	do { } while (0)
+
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nents; i++) {
+#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
+#endif
+		sg[i].dma_address = sg_phys(&sg[i]);
+	}
+
+	return nents;
+}
+
+#define dma_unmap_sg(dev, sg, nents, dir)	do { } while (0)
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction dir)
+{
+	return dma_map_single(dev, page_address(page) + offset, size, dir);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size, enum dma_data_direction dir)
+{
+	dma_unmap_single(dev, dma_address, size, dir);
+}
+
+static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle,
+				   size_t size, enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+	if (dev->bus == &pci_bus_type)
+		return;
+#endif
+	dma_cache_sync(dev, phys_to_virt(dma_handle), size, dir);
+}
+
+static inline void dma_sync_single_range(struct device *dev,
+					 dma_addr_t dma_handle,
+					 unsigned long offset, size_t size,
+					 enum dma_data_direction dir)
+{
+#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+	if (dev->bus == &pci_bus_type)
+		return;
+#endif
+	dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir);
+}
+
+static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg,
+			       int nelems, enum dma_data_direction dir)
+{
+	int i;
+
+	for (i = 0; i < nelems; i++) {
+#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT)
+		dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
+#endif
+		sg[i].dma_address = sg_phys(&sg[i]);
+	}
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev,
+					   dma_addr_t dma_handle, size_t size,
+					   enum dma_data_direction dir)
+{
+	dma_sync_single(dev, dma_handle, size, dir);
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+					      dma_addr_t dma_handle,
+					      size_t size,
+					      enum dma_data_direction dir)
+{
+	dma_sync_single(dev, dma_handle, size, dir);
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+						 dma_addr_t dma_handle,
+						 unsigned long offset,
+						 size_t size,
+						 enum dma_data_direction direction)
+{
+	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+						    dma_addr_t dma_handle,
+						    unsigned long offset,
+						    size_t size,
+						    enum dma_data_direction direction)
+{
+	dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
+}
+
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+				       struct scatterlist *sg, int nelems,
+				       enum dma_data_direction dir)
+{
+	dma_sync_sg(dev, sg, nelems, dir);
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+					  struct scatterlist *sg, int nelems,
+					  enum dma_data_direction dir)
+{
+	dma_sync_sg(dev, sg, nelems, dir);
+}
+
+
+static inline int dma_get_cache_alignment(void)
+{
+	/*
+	 * Each processor family will define its own L1_CACHE_SHIFT,
+	 * L1_CACHE_BYTES wraps to this, so this is always safe.
+	 */
+	return L1_CACHE_BYTES;
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return dma_addr == 0;
+}
+
+#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY
+
+extern int
+dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
+			    dma_addr_t device_addr, size_t size, int flags);
+
+extern void
+dma_release_declared_memory(struct device *dev);
+
+extern void *
+dma_mark_declared_memory_occupied(struct device *dev,
+				  dma_addr_t device_addr, size_t size);
+
+#endif /* __ASM_SH_DMA_MAPPING_H */
diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h
new file mode 100644
index 000000000000..beca7128e2ab
--- /dev/null
+++ b/arch/sh/include/asm/dma.h
@@ -0,0 +1,166 @@
+/*
+ * include/asm-sh/dma.h
+ *
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_DMA_H
+#define __ASM_SH_DMA_H
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/sched.h>
+#include <linux/sysdev.h>
+#include <cpu/dma.h>
+
+/* The maximum address that we can perform a DMA transfer to on this platform */
+/* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any
+   occurrence should be flagged as an error.  */
+/* But... */
+/* XXX: This is not applicable to SuperH, just needed for alloc_bootmem */
+#define MAX_DMA_ADDRESS		(PAGE_OFFSET+0x10000000)
+
+#ifdef CONFIG_NR_DMA_CHANNELS
+#  define MAX_DMA_CHANNELS	(CONFIG_NR_DMA_CHANNELS)
+#else
+#  define MAX_DMA_CHANNELS	(CONFIG_NR_ONCHIP_DMA_CHANNELS)
+#endif
+
+/*
+ * Read and write modes can mean drastically different things depending on the
+ * channel configuration. Consult your DMAC documentation and module
+ * implementation for further clues.
+ */
+#define DMA_MODE_READ		0x00
+#define DMA_MODE_WRITE		0x01
+#define DMA_MODE_MASK		0x01
+
+#define DMA_AUTOINIT		0x10
+
+/*
+ * DMAC (dma_info) flags
+ */
+enum {
+	DMAC_CHANNELS_CONFIGURED	= 0x01,
+	DMAC_CHANNELS_TEI_CAPABLE	= 0x02,	/* Transfer end interrupt */
+};
+
+/*
+ * DMA channel capabilities / flags
+ */
+enum {
+	DMA_CONFIGURED			= 0x01,
+
+	/*
+	 * Transfer end interrupt, inherited from DMAC.
+	 * wait_queue used in dma_wait_for_completion.
+	 */
+	DMA_TEI_CAPABLE			= 0x02,
+};
+
+extern spinlock_t dma_spin_lock;
+
+struct dma_channel;
+
+struct dma_ops {
+	int (*request)(struct dma_channel *chan);
+	void (*free)(struct dma_channel *chan);
+
+	int (*get_residue)(struct dma_channel *chan);
+	int (*xfer)(struct dma_channel *chan);
+	int (*configure)(struct dma_channel *chan, unsigned long flags);
+	int (*extend)(struct dma_channel *chan, unsigned long op, void *param);
+};
+
+struct dma_channel {
+	char dev_id[16];		/* unique name per DMAC of channel */
+
+	unsigned int chan;		/* DMAC channel number */
+	unsigned int vchan;		/* Virtual channel number */
+
+	unsigned int mode;
+	unsigned int count;
+
+	unsigned long sar;
+	unsigned long dar;
+
+	const char **caps;
+
+	unsigned long flags;
+	atomic_t busy;
+
+	wait_queue_head_t wait_queue;
+
+	struct sys_device dev;
+	void *priv_data;
+};
+
+struct dma_info {
+	struct platform_device *pdev;
+
+	const char *name;
+	unsigned int nr_channels;
+	unsigned long flags;
+
+	struct dma_ops *ops;
+	struct dma_channel *channels;
+
+	struct list_head list;
+	int first_channel_nr;
+	int first_vchannel_nr;
+};
+
+struct dma_chan_caps {
+	int ch_num;
+	const char **caplist;
+};
+
+#define to_dma_channel(channel) container_of(channel, struct dma_channel, dev)
+
+/* arch/sh/drivers/dma/dma-api.c */
+extern int dma_xfer(unsigned int chan, unsigned long from,
+		    unsigned long to, size_t size, unsigned int mode);
+
+#define dma_write(chan, from, to, size)	\
+	dma_xfer(chan, from, to, size, DMA_MODE_WRITE)
+#define dma_write_page(chan, from, to)	\
+	dma_write(chan, from, to, PAGE_SIZE)
+
+#define dma_read(chan, from, to, size)	\
+	dma_xfer(chan, from, to, size, DMA_MODE_READ)
+#define dma_read_page(chan, from, to)	\
+	dma_read(chan, from, to, PAGE_SIZE)
+
+extern int request_dma_bycap(const char **dmac, const char **caps,
+			     const char *dev_id);
+extern int request_dma(unsigned int chan, const char *dev_id);
+extern void free_dma(unsigned int chan);
+extern int get_dma_residue(unsigned int chan);
+extern struct dma_info *get_dma_info(unsigned int chan);
+extern struct dma_channel *get_dma_channel(unsigned int chan);
+extern void dma_wait_for_completion(unsigned int chan);
+extern void dma_configure_channel(unsigned int chan, unsigned long flags);
+
+extern int register_dmac(struct dma_info *info);
+extern void unregister_dmac(struct dma_info *info);
+extern struct dma_info *get_dma_info_by_name(const char *dmac_name);
+
+extern int dma_extend(unsigned int chan, unsigned long op, void *param);
+extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist);
+
+/* arch/sh/drivers/dma/dma-sysfs.c */
+extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *);
+extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *);
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_DMA_H */
diff --git a/arch/sh/include/asm/dmabrg.h b/arch/sh/include/asm/dmabrg.h
new file mode 100644
index 000000000000..c5edba216cf1
--- /dev/null
+++ b/arch/sh/include/asm/dmabrg.h
@@ -0,0 +1,23 @@
+/*
+ * SH7760 DMABRG (USB/Audio) support
+ */
+
+#ifndef _DMABRG_H_
+#define _DMABRG_H_
+
+/* IRQ sources */
+#define DMABRGIRQ_USBDMA	0
+#define DMABRGIRQ_USBDMAERR	1
+#define DMABRGIRQ_A0TXF		2
+#define DMABRGIRQ_A0TXH		3
+#define DMABRGIRQ_A0RXF		4
+#define DMABRGIRQ_A0RXH		5
+#define DMABRGIRQ_A1TXF		6
+#define DMABRGIRQ_A1TXH		7
+#define DMABRGIRQ_A1RXF		8
+#define DMABRGIRQ_A1RXH		9
+
+extern int dmabrg_request_irq(unsigned int, void(*)(void *), void *);
+extern void dmabrg_free_irq(unsigned int);
+
+#endif
diff --git a/arch/sh/include/asm/edosk7705.h b/arch/sh/include/asm/edosk7705.h
new file mode 100644
index 000000000000..5bdc9d9be3de
--- /dev/null
+++ b/arch/sh/include/asm/edosk7705.h
@@ -0,0 +1,30 @@
+/*
+ * include/asm-sh/edosk7705.h
+ *
+ * Modified version of io_se.h for the EDOSK7705 specific functions.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for an Hitachi EDOSK7705 development board
+ */
+
+#ifndef __ASM_SH_EDOSK7705_IO_H
+#define __ASM_SH_EDOSK7705_IO_H
+
+#include <asm/io_generic.h>
+
+extern unsigned char sh_edosk7705_inb(unsigned long port);
+extern unsigned int sh_edosk7705_inl(unsigned long port);
+
+extern void sh_edosk7705_outb(unsigned char value, unsigned long port);
+extern void sh_edosk7705_outl(unsigned int value, unsigned long port);
+
+extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count);
+extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count);
+extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count);
+extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count);
+
+extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset);
+
+#endif /* __ASM_SH_EDOSK7705_IO_H */
diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h
new file mode 100644
index 000000000000..f01449a8d378
--- /dev/null
+++ b/arch/sh/include/asm/elf.h
@@ -0,0 +1,244 @@
+#ifndef __ASM_SH_ELF_H
+#define __ASM_SH_ELF_H
+
+#include <linux/utsname.h>
+#include <asm/auxvec.h>
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/* ELF header e_flags defines */
+#define EF_SH_PIC		0x100	/* -fpic */
+#define EF_SH_FDPIC		0x8000	/* -mfdpic */
+
+/* SH (particularly SHcompact) relocation types  */
+#define	R_SH_NONE		0
+#define	R_SH_DIR32		1
+#define	R_SH_REL32		2
+#define	R_SH_DIR8WPN		3
+#define	R_SH_IND12W		4
+#define	R_SH_DIR8WPL		5
+#define	R_SH_DIR8WPZ		6
+#define	R_SH_DIR8BP		7
+#define	R_SH_DIR8W		8
+#define	R_SH_DIR8L		9
+#define	R_SH_SWITCH16		25
+#define	R_SH_SWITCH32		26
+#define	R_SH_USES		27
+#define	R_SH_COUNT		28
+#define	R_SH_ALIGN		29
+#define	R_SH_CODE		30
+#define	R_SH_DATA		31
+#define	R_SH_LABEL		32
+#define	R_SH_SWITCH8		33
+#define	R_SH_GNU_VTINHERIT	34
+#define	R_SH_GNU_VTENTRY	35
+#define	R_SH_TLS_GD_32		144
+#define	R_SH_TLS_LD_32		145
+#define	R_SH_TLS_LDO_32		146
+#define	R_SH_TLS_IE_32		147
+#define	R_SH_TLS_LE_32		148
+#define	R_SH_TLS_DTPMOD32	149
+#define	R_SH_TLS_DTPOFF32	150
+#define	R_SH_TLS_TPOFF32	151
+#define	R_SH_GOT32		160
+#define	R_SH_PLT32		161
+#define	R_SH_COPY		162
+#define	R_SH_GLOB_DAT		163
+#define	R_SH_JMP_SLOT		164
+#define	R_SH_RELATIVE		165
+#define	R_SH_GOTOFF		166
+#define	R_SH_GOTPC		167
+
+/* FDPIC relocs */
+#define R_SH_GOT20		70
+#define R_SH_GOTOFF20		71
+#define R_SH_GOTFUNCDESC	72
+#define R_SH_GOTFUNCDESC20	73
+#define R_SH_GOTOFFFUNCDESC	74
+#define R_SH_GOTOFFFUNCDESC20	75
+#define R_SH_FUNCDESC		76
+#define R_SH_FUNCDESC_VALUE	77
+
+#if 0 /* XXX - later .. */
+#define R_SH_GOT20		198
+#define R_SH_GOTOFF20		199
+#define R_SH_GOTFUNCDESC	200
+#define R_SH_GOTFUNCDESC20	201
+#define R_SH_GOTOFFFUNCDESC	202
+#define R_SH_GOTOFFFUNCDESC20	203
+#define R_SH_FUNCDESC		204
+#define R_SH_FUNCDESC_VALUE	205
+#endif
+
+/* SHmedia relocs */
+#define R_SH_IMM_LOW16		246
+#define R_SH_IMM_LOW16_PCREL	247
+#define R_SH_IMM_MEDLOW16	248
+#define R_SH_IMM_MEDLOW16_PCREL	249
+/* Keep this the last entry.  */
+#define	R_SH_NUM		256
+
+/*
+ * ELF register definitions..
+ */
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fpu_struct elf_fpregset_t;
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#ifdef __LITTLE_ENDIAN__
+#define ELF_DATA	ELFDATA2LSB
+#else
+#define ELF_DATA	ELFDATA2MSB
+#endif
+#define ELF_ARCH	EM_SH
+
+#ifdef __KERNEL__
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)		((x)->e_machine == EM_SH)
+#define elf_check_fdpic(x)		((x)->e_flags & EF_SH_FDPIC)
+#define elf_check_const_displacement(x)	((x)->e_flags & EF_SH_PIC)
+
+#define USE_ELF_CORE_DUMP
+#define ELF_FDPIC_CORE_EFLAGS	EF_SH_FDPIC
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (2 * TASK_SIZE / 3)
+
+#define ELF_CORE_COPY_REGS(_dest,_regs)				\
+	memcpy((char *) &_dest, (char *) _regs,			\
+	       sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(boot_cpu_data.flags)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM	(utsname()->machine)
+
+#ifdef __SH5__
+#define ELF_PLAT_INIT(_r, load_addr) \
+  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \
+       _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \
+       _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \
+       _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \
+       _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \
+       _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \
+       _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \
+       _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \
+       _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \
+       _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \
+       _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \
+       _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \
+       _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \
+       _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \
+       _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \
+       _r->sr = SR_FD | SR_MMU; } while (0)
+#else
+#define ELF_PLAT_INIT(_r, load_addr) \
+  do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \
+       _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \
+       _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \
+       _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \
+       _r->sr = SR_FD; } while (0)
+
+#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr,	\
+			    _dynamic_addr)				\
+do {									\
+	_r->regs[0]	= 0;						\
+	_r->regs[1]	= 0;						\
+	_r->regs[2]	= 0;						\
+	_r->regs[3]	= 0;						\
+	_r->regs[4]	= 0;						\
+	_r->regs[5]	= 0;						\
+	_r->regs[6]	= 0;						\
+	_r->regs[7]	= 0;						\
+	_r->regs[8]	= _exec_map_addr;				\
+	_r->regs[9]	= _interp_map_addr;				\
+	_r->regs[10]	= _dynamic_addr;				\
+	_r->regs[11]	= 0;						\
+	_r->regs[12]	= 0;						\
+	_r->regs[13]	= 0;						\
+	_r->regs[14]	= 0;						\
+	_r->sr		= SR_FD;					\
+} while (0)
+#endif
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
+struct task_struct;
+extern int dump_task_regs (struct task_struct *, elf_gregset_t *);
+extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *);
+
+#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs)
+#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs)
+
+#ifdef CONFIG_VSYSCALL
+/* vDSO has arch_setup_additional_pages */
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+				       int executable_stack);
+
+extern unsigned int vdso_enabled;
+extern void __kernel_vsyscall;
+
+#define VDSO_BASE		((unsigned long)current->mm->context.vdso)
+#define VDSO_SYM(x)		(VDSO_BASE + (unsigned long)(x))
+
+#define VSYSCALL_AUX_ENT					\
+	if (vdso_enabled)					\
+		NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE);
+#else
+#define VSYSCALL_AUX_ENT
+#endif /* CONFIG_VSYSCALL */
+
+#ifdef CONFIG_SH_FPU
+#define FPU_AUX_ENT	NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT)
+#else
+#define FPU_AUX_ENT
+#endif
+
+extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape;
+
+/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */
+#define ARCH_DLINFO						\
+do {								\
+	/* Optional FPU initialization */			\
+	FPU_AUX_ENT;						\
+								\
+	/* Optional vsyscall entry */				\
+	VSYSCALL_AUX_ENT;					\
+								\
+	/* Cache desc */					\
+	NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape);	\
+	NEW_AUX_ENT(AT_L1D_CACHESHAPE, l1d_cache_shape);	\
+	NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape);		\
+} while (0)
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_ELF_H */
diff --git a/arch/sh/include/asm/emergency-restart.h b/arch/sh/include/asm/emergency-restart.h
new file mode 100644
index 000000000000..108d8c48e42e
--- /dev/null
+++ b/arch/sh/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/sh/include/asm/entry-macros.S b/arch/sh/include/asm/entry-macros.S
new file mode 100644
index 000000000000..2dab0b8d9454
--- /dev/null
+++ b/arch/sh/include/asm/entry-macros.S
@@ -0,0 +1,33 @@
+! entry.S macro define
+	
+	.macro	cli
+	stc	sr, r0
+	or	#0xf0, r0
+	ldc	r0, sr
+	.endm
+
+	.macro	sti
+	mov	#0xf0, r11
+	extu.b	r11, r11
+	not	r11, r11
+	stc	sr, r10
+	and	r11, r10
+#ifdef CONFIG_CPU_HAS_SR_RB
+	stc	k_g_imask, r11
+	or	r11, r10
+#endif
+	ldc	r10, sr
+	.endm
+
+	.macro	get_current_thread_info, ti, tmp
+#ifdef CONFIG_CPU_HAS_SR_RB
+	stc	r7_bank, \ti
+#else
+	mov	#((THREAD_SIZE - 1) >> 10) ^ 0xff, \tmp
+	shll8	\tmp
+	shll2	\tmp
+	mov	r15, \ti
+	and	\tmp, \ti
+#endif	
+	.endm
+
diff --git a/arch/sh/include/asm/errno.h b/arch/sh/include/asm/errno.h
new file mode 100644
index 000000000000..51cf6f9cebb8
--- /dev/null
+++ b/arch/sh/include/asm/errno.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_ERRNO_H
+#define __ASM_SH_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* __ASM_SH_ERRNO_H */
diff --git a/arch/sh/include/asm/fb.h b/arch/sh/include/asm/fb.h
new file mode 100644
index 000000000000..d92e99cd8c8a
--- /dev/null
+++ b/arch/sh/include/asm/fb.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+	vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/sh/include/asm/fcntl.h b/arch/sh/include/asm/fcntl.h
new file mode 100644
index 000000000000..46ab12db5739
--- /dev/null
+++ b/arch/sh/include/asm/fcntl.h
@@ -0,0 +1 @@
+#include <asm-generic/fcntl.h>
diff --git a/arch/sh/include/asm/fixmap.h b/arch/sh/include/asm/fixmap.h
new file mode 100644
index 000000000000..721fcc4d5e98
--- /dev/null
+++ b/arch/sh/include/asm/fixmap.h
@@ -0,0 +1,117 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#include <linux/kernel.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special  addresses
+ * from the end of P3 backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanizm,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+#define FIX_N_COLOURS 16
+	FIX_CMAP_BEGIN,
+	FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS,
+	FIX_UNCACHED,
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap(enum fixed_addresses idx,
+			 unsigned long phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between vmalloc'ed areas and
+ * the start of the fixmap, and leave one page empty
+ * at the top of mem..
+ */
+#ifdef CONFIG_SUPERH32
+#define FIXADDR_TOP	(P4SEG - PAGE_SIZE)
+#else
+#define FIXADDR_TOP	(0xff000000 - PAGE_SIZE)
+#endif
+#define FIXADDR_SIZE	(__end_of_fixed_addresses << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+#endif
diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h
new file mode 100644
index 000000000000..0cc800299e06
--- /dev/null
+++ b/arch/sh/include/asm/flat.h
@@ -0,0 +1,24 @@
+/*
+ * include/asm-sh/flat.h
+ *
+ * uClinux flat-format executables
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive for
+ * more details.
+ */
+#ifndef __ASM_SH_FLAT_H
+#define __ASM_SH_FLAT_H
+
+#define	flat_stack_align(sp)			/* nothing needed */
+#define	flat_argvp_envp_on_stack()		0
+#define	flat_old_ram_flag(flags)		(flags)
+#define	flat_reloc_valid(reloc, size)		((reloc) <= (size))
+#define	flat_get_addr_from_rp(rp, relval, flags, p)	get_unaligned(rp)
+#define	flat_put_addr_at_rp(rp, val, relval)	put_unaligned(val,rp)
+#define	flat_get_relocate_addr(rel)		(rel)
+#define	flat_set_persistent(relval, p)		({ (void)p; 0; })
+
+#endif /* __ASM_SH_FLAT_H */
diff --git a/arch/sh/include/asm/fpu.h b/arch/sh/include/asm/fpu.h
new file mode 100644
index 000000000000..91462fea1507
--- /dev/null
+++ b/arch/sh/include/asm/fpu.h
@@ -0,0 +1,55 @@
+#ifndef __ASM_SH_FPU_H
+#define __ASM_SH_FPU_H
+
+#ifndef __ASSEMBLY__
+#include <linux/preempt.h>
+#include <asm/ptrace.h>
+
+#ifdef CONFIG_SH_FPU
+static inline void release_fpu(struct pt_regs *regs)
+{
+	regs->sr |= SR_FD;
+}
+
+static inline void grab_fpu(struct pt_regs *regs)
+{
+	regs->sr &= ~SR_FD;
+}
+
+struct task_struct;
+
+extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs);
+#else
+
+#define release_fpu(regs)	do { } while (0)
+#define grab_fpu(regs)		do { } while (0)
+
+static inline void save_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+	clear_tsk_thread_flag(tsk, TIF_USEDFPU);
+}
+#endif
+
+extern int do_fpu_inst(unsigned short, struct pt_regs *);
+
+static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+	preempt_disable();
+	if (test_tsk_thread_flag(tsk, TIF_USEDFPU))
+		save_fpu(tsk, regs);
+	preempt_enable();
+}
+
+static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs)
+{
+	preempt_disable();
+	if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) {
+		clear_tsk_thread_flag(tsk, TIF_USEDFPU);
+		release_fpu(regs);
+	}
+	preempt_enable();
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_SH_FPU_H */
diff --git a/arch/sh/include/asm/freq.h b/arch/sh/include/asm/freq.h
new file mode 100644
index 000000000000..4ece90b09b9c
--- /dev/null
+++ b/arch/sh/include/asm/freq.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-sh/freq.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __ASM_SH_FREQ_H
+#define __ASM_SH_FREQ_H
+#ifdef __KERNEL__
+
+#include <cpu/freq.h>
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_FREQ_H */
diff --git a/arch/sh/include/asm/futex-irq.h b/arch/sh/include/asm/futex-irq.h
new file mode 100644
index 000000000000..a9f16a7f9aea
--- /dev/null
+++ b/arch/sh/include/asm/futex-irq.h
@@ -0,0 +1,111 @@
+#ifndef __ASM_SH_FUTEX_IRQ_H
+#define __ASM_SH_FUTEX_IRQ_H
+
+#include <asm/system.h>
+
+static inline int atomic_futex_op_xchg_set(int oparg, int __user *uaddr,
+					   int *oldval)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+
+	ret = get_user(*oldval, uaddr);
+	if (!ret)
+		ret = put_user(oparg, uaddr);
+
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline int atomic_futex_op_xchg_add(int oparg, int __user *uaddr,
+					   int *oldval)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+
+	ret = get_user(*oldval, uaddr);
+	if (!ret)
+		ret = put_user(*oldval + oparg, uaddr);
+
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline int atomic_futex_op_xchg_or(int oparg, int __user *uaddr,
+					  int *oldval)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+
+	ret = get_user(*oldval, uaddr);
+	if (!ret)
+		ret = put_user(*oldval | oparg, uaddr);
+
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline int atomic_futex_op_xchg_and(int oparg, int __user *uaddr,
+					   int *oldval)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+
+	ret = get_user(*oldval, uaddr);
+	if (!ret)
+		ret = put_user(*oldval & oparg, uaddr);
+
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline int atomic_futex_op_xchg_xor(int oparg, int __user *uaddr,
+					   int *oldval)
+{
+	unsigned long flags;
+	int ret;
+
+	local_irq_save(flags);
+
+	ret = get_user(*oldval, uaddr);
+	if (!ret)
+		ret = put_user(*oldval ^ oparg, uaddr);
+
+	local_irq_restore(flags);
+
+	return ret;
+}
+
+static inline int atomic_futex_op_cmpxchg_inatomic(int __user *uaddr,
+						   int oldval, int newval)
+{
+	unsigned long flags;
+	int ret, prev = 0;
+
+	local_irq_save(flags);
+
+	ret = get_user(prev, uaddr);
+	if (!ret && oldval == prev)
+		ret = put_user(newval, uaddr);
+
+	local_irq_restore(flags);
+
+	if (ret)
+		return ret;
+
+	return prev;
+}
+
+#endif /* __ASM_SH_FUTEX_IRQ_H */
diff --git a/arch/sh/include/asm/futex.h b/arch/sh/include/asm/futex.h
new file mode 100644
index 000000000000..68256ec5fa35
--- /dev/null
+++ b/arch/sh/include/asm/futex.h
@@ -0,0 +1,77 @@
+#ifndef __ASM_SH_FUTEX_H
+#define __ASM_SH_FUTEX_H
+
+#ifdef __KERNEL__
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+
+/* XXX: UP variants, fix for SH-4A and SMP.. */
+#include <asm/futex-irq.h>
+
+static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret;
+
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		ret = atomic_futex_op_xchg_set(oparg, uaddr, &oldval);
+		break;
+	case FUTEX_OP_ADD:
+		ret = atomic_futex_op_xchg_add(oparg, uaddr, &oldval);
+		break;
+	case FUTEX_OP_OR:
+		ret = atomic_futex_op_xchg_or(oparg, uaddr, &oldval);
+		break;
+	case FUTEX_OP_ANDN:
+		ret = atomic_futex_op_xchg_and(~oparg, uaddr, &oldval);
+		break;
+	case FUTEX_OP_XOR:
+		ret = atomic_futex_op_xchg_xor(oparg, uaddr, &oldval);
+		break;
+	default:
+		ret = -ENOSYS;
+		break;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+		return -EFAULT;
+
+	return atomic_futex_op_cmpxchg_inatomic(uaddr, oldval, newval);
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_FUTEX_H */
diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h
new file mode 100644
index 000000000000..cf32bd2df881
--- /dev/null
+++ b/arch/sh/include/asm/gpio.h
@@ -0,0 +1,19 @@
+/*
+ *  include/asm-sh/gpio.h
+ *
+ *  Copyright (C) 2007 Markus Brunner, Mark Jonas
+ *
+ *  Addresses for the Pin Function Controller
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_GPIO_H
+#define __ASM_SH_GPIO_H
+
+#if defined(CONFIG_CPU_SH3)
+#include <cpu/gpio.h>
+#endif
+
+#endif /* __ASM_SH_GPIO_H */
diff --git a/arch/sh/include/asm/hardirq.h b/arch/sh/include/asm/hardirq.h
new file mode 100644
index 000000000000..715ee237fc77
--- /dev/null
+++ b/arch/sh/include/asm/hardirq.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_SH_HARDIRQ_H
+#define __ASM_SH_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/irq.h>
+
+/* entry.S is sensitive to the offsets of these fields */
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+extern void ack_bad_irq(unsigned int irq);
+
+#endif /* __ASM_SH_HARDIRQ_H */
diff --git a/arch/sh/include/asm/hd64461.h b/arch/sh/include/asm/hd64461.h
new file mode 100644
index 000000000000..8c1353baf00f
--- /dev/null
+++ b/arch/sh/include/asm/hd64461.h
@@ -0,0 +1,250 @@
+#ifndef __ASM_SH_HD64461
+#define __ASM_SH_HD64461
+/*
+ *	Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ *	Copyright (C) 2004 Paul Mundt
+ *	Copyright (C) 2000 YAEGASHI Takeshi
+ *
+ *		Hitachi HD64461 companion chip support
+ *	(please note manual reference 0x10000000 = 0xb0000000)
+ */
+
+/* Constants for PCMCIA mappings */
+#define	HD64461_PCC_WINDOW	0x01000000
+
+/* Area 6 - Slot 0 - memory and/or IO card */
+#define	HD64461_PCC0_BASE	(CONFIG_HD64461_IOBASE + 0x8000000)
+#define	HD64461_PCC0_ATTR	(HD64461_PCC0_BASE)				/* 0xb80000000 */
+#define	HD64461_PCC0_COMM	(HD64461_PCC0_BASE+HD64461_PCC_WINDOW)		/* 0xb90000000 */
+#define	HD64461_PCC0_IO		(HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW)	/* 0xba0000000 */
+
+/* Area 5 - Slot 1 - memory card only */
+#define	HD64461_PCC1_BASE	(CONFIG_HD64461_IOBASE + 0x4000000)
+#define	HD64461_PCC1_ATTR	(HD64461_PCC1_BASE)				/* 0xb4000000 */
+#define	HD64461_PCC1_COMM	(HD64461_PCC1_BASE+HD64461_PCC_WINDOW)		/* 0xb5000000 */
+
+/* Standby Control Register for HD64461 */
+#define	HD64461_STBCR			CONFIG_HD64461_IOBASE
+#define	HD64461_STBCR_CKIO_STBY		0x2000
+#define	HD64461_STBCR_SAFECKE_IST	0x1000
+#define	HD64461_STBCR_SLCKE_IST		0x0800
+#define	HD64461_STBCR_SAFECKE_OST	0x0400
+#define	HD64461_STBCR_SLCKE_OST		0x0200
+#define	HD64461_STBCR_SMIAST		0x0100
+#define	HD64461_STBCR_SLCDST		0x0080
+#define	HD64461_STBCR_SPC0ST		0x0040
+#define	HD64461_STBCR_SPC1ST		0x0020
+#define	HD64461_STBCR_SAFEST		0x0010
+#define	HD64461_STBCR_STM0ST		0x0008
+#define	HD64461_STBCR_STM1ST		0x0004
+#define	HD64461_STBCR_SIRST		0x0002
+#define	HD64461_STBCR_SURTST		0x0001
+
+/* System Configuration Register */
+#define	HD64461_SYSCR		(CONFIG_HD64461_IOBASE + 0x02)
+
+/* CPU Data Bus Control Register */
+#define	HD64461_SCPUCR		(CONFIG_HD64461_IOBASE + 0x04)
+
+/* Base Address Register */
+#define	HD64461_LCDCBAR		(CONFIG_HD64461_IOBASE + 0x1000)
+
+/* Line increment address */
+#define	HD64461_LCDCLOR		(CONFIG_HD64461_IOBASE + 0x1002)
+
+/* Controls LCD controller */
+#define	HD64461_LCDCCR		(CONFIG_HD64461_IOBASE + 0x1004)
+
+/* LCCDR control bits */
+#define	HD64461_LCDCCR_STBACK	0x0400	/* Standby Back */
+#define	HD64461_LCDCCR_STREQ	0x0100	/* Standby Request */
+#define	HD64461_LCDCCR_MOFF	0x0080	/* Memory Off */
+#define	HD64461_LCDCCR_REFSEL	0x0040	/* Refresh Select */
+#define	HD64461_LCDCCR_EPON	0x0020	/* End Power On */
+#define	HD64461_LCDCCR_SPON	0x0010	/* Start Power On */
+
+/* Controls LCD (1) */
+#define	HD64461_LDR1		(CONFIG_HD64461_IOBASE + 0x1010)
+#define	HD64461_LDR1_DON	0x01	/* Display On */
+#define	HD64461_LDR1_DINV	0x80	/* Display Invert */
+
+/* Controls LCD (2) */
+#define	HD64461_LDR2		(CONFIG_HD64461_IOBASE + 0x1012)
+#define	HD64461_LDHNCR		(CONFIG_HD64461_IOBASE + 0x1014)	/* Number of horizontal characters */
+#define	HD64461_LDHNSR		(CONFIG_HD64461_IOBASE + 0x1016)	/* Specify output start position + width of CL1 */
+#define	HD64461_LDVNTR		(CONFIG_HD64461_IOBASE + 0x1018)	/* Specify total vertical lines */
+#define	HD64461_LDVNDR		(CONFIG_HD64461_IOBASE + 0x101a)	/* specify number of display vertical lines */
+#define	HD64461_LDVSPR		(CONFIG_HD64461_IOBASE + 0x101c)	/* specify vertical synchronization pos and AC nr */
+
+/* Controls LCD (3) */
+#define	HD64461_LDR3		(CONFIG_HD64461_IOBASE + 0x101e)
+
+/* Palette Registers */
+#define	HD64461_CPTWAR		(CONFIG_HD64461_IOBASE + 0x1030)	/* Color Palette Write Address Register */
+#define	HD64461_CPTWDR		(CONFIG_HD64461_IOBASE + 0x1032)	/* Color Palette Write Data Register */
+#define	HD64461_CPTRAR		(CONFIG_HD64461_IOBASE + 0x1034)	/* Color Palette Read Address Register */
+#define	HD64461_CPTRDR		(CONFIG_HD64461_IOBASE + 0x1036)	/* Color Palette Read Data Register */
+
+#define	HD64461_GRDOR		(CONFIG_HD64461_IOBASE + 0x1040)	/* Display Resolution Offset Register */
+#define	HD64461_GRSCR		(CONFIG_HD64461_IOBASE + 0x1042)	/* Solid Color Register */
+#define	HD64461_GRCFGR		(CONFIG_HD64461_IOBASE + 0x1044)	/* Accelerator Configuration Register */
+
+#define	HD64461_GRCFGR_ACCSTATUS	0x10	/* Accelerator Status */
+#define	HD64461_GRCFGR_ACCRESET		0x08	/* Accelerator Reset */
+#define	HD64461_GRCFGR_ACCSTART_BITBLT	0x06	/* Accelerator Start BITBLT */
+#define	HD64461_GRCFGR_ACCSTART_LINE	0x04	/* Accelerator Start Line Drawing */
+#define	HD64461_GRCFGR_COLORDEPTH16	0x01	/* Sets Colordepth 16 for Accelerator */
+#define	HD64461_GRCFGR_COLORDEPTH8	0x01	/* Sets Colordepth 8 for Accelerator */
+
+/* Line Drawing Registers */
+#define	HD64461_LNSARH		(CONFIG_HD64461_IOBASE + 0x1046)	/* Line Start Address Register (H) */
+#define	HD64461_LNSARL		(CONFIG_HD64461_IOBASE + 0x1048)	/* Line Start Address Register (L) */
+#define	HD64461_LNAXLR		(CONFIG_HD64461_IOBASE + 0x104a)	/* Axis Pixel Length Register */
+#define	HD64461_LNDGR		(CONFIG_HD64461_IOBASE + 0x104c)	/* Diagonal Register */
+#define	HD64461_LNAXR		(CONFIG_HD64461_IOBASE + 0x104e)	/* Axial Register */
+#define	HD64461_LNERTR		(CONFIG_HD64461_IOBASE + 0x1050)	/* Start Error Term Register */
+#define	HD64461_LNMDR		(CONFIG_HD64461_IOBASE + 0x1052)	/* Line Mode Register */
+
+/* BitBLT Registers */
+#define	HD64461_BBTSSARH	(CONFIG_HD64461_IOBASE + 0x1054)	/* Source Start Address Register (H) */
+#define	HD64461_BBTSSARL	(CONFIG_HD64461_IOBASE + 0x1056)	/* Source Start Address Register (L) */
+#define	HD64461_BBTDSARH	(CONFIG_HD64461_IOBASE + 0x1058)	/* Destination Start Address Register (H) */
+#define	HD64461_BBTDSARL	(CONFIG_HD64461_IOBASE + 0x105a)	/* Destination Start Address Register (L) */
+#define	HD64461_BBTDWR		(CONFIG_HD64461_IOBASE + 0x105c)	/* Destination Block Width Register */
+#define	HD64461_BBTDHR		(CONFIG_HD64461_IOBASE + 0x105e)	/* Destination Block Height Register */
+#define	HD64461_BBTPARH		(CONFIG_HD64461_IOBASE + 0x1060)	/* Pattern Start Address Register (H) */
+#define	HD64461_BBTPARL		(CONFIG_HD64461_IOBASE + 0x1062)	/* Pattern Start Address Register (L) */
+#define	HD64461_BBTMARH		(CONFIG_HD64461_IOBASE + 0x1064)	/* Mask Start Address Register (H) */
+#define	HD64461_BBTMARL		(CONFIG_HD64461_IOBASE + 0x1066)	/* Mask Start Address Register (L) */
+#define	HD64461_BBTROPR		(CONFIG_HD64461_IOBASE + 0x1068)	/* ROP Register */
+#define	HD64461_BBTMDR		(CONFIG_HD64461_IOBASE + 0x106a)	/* BitBLT Mode Register */
+
+/* PC Card Controller Registers */
+/* Maps to Physical Area 6 */
+#define	HD64461_PCC0ISR		(CONFIG_HD64461_IOBASE + 0x2000)	/* socket 0 interface status */
+#define	HD64461_PCC0GCR		(CONFIG_HD64461_IOBASE + 0x2002)	/* socket 0 general control */
+#define	HD64461_PCC0CSCR	(CONFIG_HD64461_IOBASE + 0x2004)	/* socket 0 card status change */
+#define	HD64461_PCC0CSCIER	(CONFIG_HD64461_IOBASE + 0x2006)	/* socket 0 card status change interrupt enable */
+#define	HD64461_PCC0SCR		(CONFIG_HD64461_IOBASE + 0x2008)	/* socket 0 software control */
+/* Maps to Physical Area 5 */
+#define	HD64461_PCC1ISR		(CONFIG_HD64461_IOBASE + 0x2010)	/* socket 1 interface status */
+#define	HD64461_PCC1GCR		(CONFIG_HD64461_IOBASE + 0x2012)	/* socket 1 general control */
+#define	HD64461_PCC1CSCR	(CONFIG_HD64461_IOBASE + 0x2014)	/* socket 1 card status change */
+#define	HD64461_PCC1CSCIER	(CONFIG_HD64461_IOBASE + 0x2016)	/* socket 1 card status change interrupt enable */
+#define	HD64461_PCC1SCR		(CONFIG_HD64461_IOBASE + 0x2018)	/* socket 1 software control */
+
+/* PCC Interface Status Register */
+#define	HD64461_PCCISR_READY		0x80	/* card ready */
+#define	HD64461_PCCISR_MWP		0x40	/* card write-protected */
+#define	HD64461_PCCISR_VS2		0x20	/* voltage select pin 2 */
+#define	HD64461_PCCISR_VS1		0x10	/* voltage select pin 1 */
+#define	HD64461_PCCISR_CD2		0x08	/* card detect 2 */
+#define	HD64461_PCCISR_CD1		0x04	/* card detect 1 */
+#define	HD64461_PCCISR_BVD2		0x02	/* battery 1 */
+#define	HD64461_PCCISR_BVD1		0x01	/* battery 1 */
+
+#define	HD64461_PCCISR_PCD_MASK		0x0c	/* card detect */
+#define	HD64461_PCCISR_BVD_MASK		0x03	/* battery voltage */
+#define	HD64461_PCCISR_BVD_BATGOOD	0x03	/* battery good */
+#define	HD64461_PCCISR_BVD_BATWARN	0x01	/* battery low warning */
+#define	HD64461_PCCISR_BVD_BATDEAD1	0x02	/* battery dead */
+#define	HD64461_PCCISR_BVD_BATDEAD2	0x00	/* battery dead */
+
+/* PCC General Control Register */
+#define	HD64461_PCCGCR_DRVE		0x80	/* output drive */
+#define	HD64461_PCCGCR_PCCR		0x40	/* PC card reset */
+#define	HD64461_PCCGCR_PCCT		0x20	/* PC card type, 1=IO&mem, 0=mem */
+#define	HD64461_PCCGCR_VCC0		0x10	/* voltage control pin VCC0SEL0 */
+#define	HD64461_PCCGCR_PMMOD		0x08	/* memory mode */
+#define	HD64461_PCCGCR_PA25		0x04	/* pin A25 */
+#define	HD64461_PCCGCR_PA24		0x02	/* pin A24 */
+#define	HD64461_PCCGCR_REG		0x01	/* pin PCC0REG# */
+
+/* PCC Card Status Change Register */
+#define	HD64461_PCCCSCR_SCDI		0x80	/* sw card detect intr */
+#define	HD64461_PCCCSCR_SRV1		0x40	/* reserved */
+#define	HD64461_PCCCSCR_IREQ		0x20	/* IREQ intr req */
+#define	HD64461_PCCCSCR_SC		0x10	/* STSCHG (status change) pin */
+#define	HD64461_PCCCSCR_CDC		0x08	/* CD (card detect) change */
+#define	HD64461_PCCCSCR_RC		0x04	/* READY change */
+#define	HD64461_PCCCSCR_BW		0x02	/* battery warning change */
+#define	HD64461_PCCCSCR_BD		0x01	/* battery dead change */
+
+/* PCC Card Status Change Interrupt Enable Register */
+#define	HD64461_PCCCSCIER_CRE		0x80	/* change reset enable */
+#define	HD64461_PCCCSCIER_IREQE_MASK	0x60	/* IREQ enable */
+#define	HD64461_PCCCSCIER_IREQE_DISABLED 0x00	/* IREQ disabled */
+#define	HD64461_PCCCSCIER_IREQE_LEVEL	0x20	/* IREQ level-triggered */
+#define	HD64461_PCCCSCIER_IREQE_FALLING	0x40	/* IREQ falling-edge-trig */
+#define	HD64461_PCCCSCIER_IREQE_RISING	0x60	/* IREQ rising-edge-trig */
+
+#define	HD64461_PCCCSCIER_SCE		0x10	/* status change enable */
+#define	HD64461_PCCCSCIER_CDE		0x08	/* card detect change enable */
+#define	HD64461_PCCCSCIER_RE		0x04	/* ready change enable */
+#define	HD64461_PCCCSCIER_BWE		0x02	/* battery warn change enable */
+#define	HD64461_PCCCSCIER_BDE		0x01	/* battery dead change enable*/
+
+/* PCC Software Control Register */
+#define	HD64461_PCCSCR_VCC1		0x02	/* voltage control pin 1 */
+#define	HD64461_PCCSCR_SWP		0x01	/* write protect */
+
+/* PCC0 Output Pins Control Register */
+#define	HD64461_P0OCR		(CONFIG_HD64461_IOBASE + 0x202a)
+
+/* PCC1 Output Pins Control Register */
+#define	HD64461_P1OCR		(CONFIG_HD64461_IOBASE + 0x202c)
+
+/* PC Card General Control Register */
+#define	HD64461_PGCR		(CONFIG_HD64461_IOBASE + 0x202e)
+
+/* Port Control Registers */
+#define	HD64461_GPACR		(CONFIG_HD64461_IOBASE + 0x4000)	/* Port A - Handles IRDA/TIMER */
+#define	HD64461_GPBCR		(CONFIG_HD64461_IOBASE + 0x4002)	/* Port B - Handles UART */
+#define	HD64461_GPCCR		(CONFIG_HD64461_IOBASE + 0x4004)	/* Port C - Handles PCMCIA 1 */
+#define	HD64461_GPDCR		(CONFIG_HD64461_IOBASE + 0x4006)	/* Port D - Handles PCMCIA 1 */
+
+/* Port Control Data Registers */
+#define	HD64461_GPADR		(CONFIG_HD64461_IOBASE + 0x4010)	/* A */
+#define	HD64461_GPBDR		(CONFIG_HD64461_IOBASE + 0x4012)	/* B */
+#define	HD64461_GPCDR		(CONFIG_HD64461_IOBASE + 0x4014)	/* C */
+#define	HD64461_GPDDR		(CONFIG_HD64461_IOBASE + 0x4016)	/* D */
+
+/* Interrupt Control Registers */
+#define	HD64461_GPAICR		(CONFIG_HD64461_IOBASE + 0x4020)	/* A */
+#define	HD64461_GPBICR		(CONFIG_HD64461_IOBASE + 0x4022)	/* B */
+#define	HD64461_GPCICR		(CONFIG_HD64461_IOBASE + 0x4024)	/* C */
+#define	HD64461_GPDICR		(CONFIG_HD64461_IOBASE + 0x4026)	/* D */
+
+/* Interrupt Status Registers */
+#define	HD64461_GPAISR		(CONFIG_HD64461_IOBASE + 0x4040)	/* A */
+#define	HD64461_GPBISR		(CONFIG_HD64461_IOBASE + 0x4042)	/* B */
+#define	HD64461_GPCISR		(CONFIG_HD64461_IOBASE + 0x4044)	/* C */
+#define	HD64461_GPDISR		(CONFIG_HD64461_IOBASE + 0x4046)	/* D */
+
+/* Interrupt Request Register & Interrupt Mask Register */
+#define	HD64461_NIRR		(CONFIG_HD64461_IOBASE + 0x5000)
+#define	HD64461_NIMR		(CONFIG_HD64461_IOBASE + 0x5002)
+
+#define	HD64461_IRQBASE		OFFCHIP_IRQ_BASE
+#define	OFFCHIP_IRQ_BASE	64
+#define	HD64461_IRQ_NUM		16
+
+#define	HD64461_IRQ_UART	(HD64461_IRQBASE+5)
+#define	HD64461_IRQ_IRDA	(HD64461_IRQBASE+6)
+#define	HD64461_IRQ_TMU1	(HD64461_IRQBASE+9)
+#define	HD64461_IRQ_TMU0	(HD64461_IRQBASE+10)
+#define	HD64461_IRQ_GPIO	(HD64461_IRQBASE+11)
+#define	HD64461_IRQ_AFE		(HD64461_IRQBASE+12)
+#define	HD64461_IRQ_PCC1	(HD64461_IRQBASE+13)
+#define	HD64461_IRQ_PCC0	(HD64461_IRQBASE+14)
+
+#define __IO_PREFIX	hd64461
+#include <asm/io_generic.h>
+
+/* arch/sh/cchips/hd6446x/hd64461/setup.c */
+int hd64461_irq_demux(int irq);
+void hd64461_register_irq_demux(int irq,
+				int (*demux) (int irq, void *dev), void *dev);
+void hd64461_unregister_irq_demux(int irq);
+
+#endif
diff --git a/arch/sh/include/asm/hd64465/gpio.h b/arch/sh/include/asm/hd64465/gpio.h
new file mode 100644
index 000000000000..a3cdca2713dd
--- /dev/null
+++ b/arch/sh/include/asm/hd64465/gpio.h
@@ -0,0 +1,46 @@
+#ifndef _ASM_SH_HD64465_GPIO_
+#define _ASM_SH_HD64465_GPIO_ 1
+/*
+ * $Id: gpio.h,v 1.3 2003/05/04 19:30:14 lethal Exp $
+ *
+ * Hitachi HD64465 companion chip: General Purpose IO pins support.
+ * This layer enables other device drivers to configure GPIO
+ * pins, get and set their values, and register an interrupt
+ * routine for when input pins change in hardware.
+ *
+ * by Greg Banks <gbanks@pocketpenguins.com>
+ * (c) 2000 PocketPenguins Inc.
+ */
+#include <asm/hd64465.h>
+
+/* Macro to construct a portpin number (used in all
+ * subsequent functions) from a port letter and a pin
+ * number, e.g. HD64465_GPIO_PORTPIN('A', 5).
+ */
+#define HD64465_GPIO_PORTPIN(port,pin)	(((port)-'A')<<3|(pin))
+
+/* Pin configuration constants for _configure() */
+#define HD64465_GPIO_FUNCTION2	0	/* use the pin's *other* function */
+#define HD64465_GPIO_OUT	1	/* output */
+#define HD64465_GPIO_IN_PULLUP	2	/* input, pull-up MOS on */
+#define HD64465_GPIO_IN		3	/* input */
+
+/* Configure a pin's direction */
+extern void hd64465_gpio_configure(int portpin, int direction);
+
+/* Get, set value */
+extern void hd64465_gpio_set_pin(int portpin, unsigned int value);
+extern unsigned int hd64465_gpio_get_pin(int portpin);
+extern void hd64465_gpio_set_port(int port, unsigned int value);
+extern unsigned int hd64465_gpio_get_port(int port);
+
+/* mode constants for _register_irq() */
+#define HD64465_GPIO_FALLING	0
+#define HD64465_GPIO_RISING	1
+
+/* Interrupt on external value change */
+extern void hd64465_gpio_register_irq(int portpin, int mode,
+	void (*handler)(int portpin, void *dev), void *dev);
+extern void hd64465_gpio_unregister_irq(int portpin);
+
+#endif /* _ASM_SH_HD64465_GPIO_  */
diff --git a/arch/sh/include/asm/hd64465/hd64465.h b/arch/sh/include/asm/hd64465/hd64465.h
new file mode 100644
index 000000000000..cfd0e803d2a2
--- /dev/null
+++ b/arch/sh/include/asm/hd64465/hd64465.h
@@ -0,0 +1,256 @@
+#ifndef _ASM_SH_HD64465_
+#define _ASM_SH_HD64465_ 1
+/*
+ * $Id: hd64465.h,v 1.3 2003/05/04 19:30:15 lethal Exp $
+ *
+ * Hitachi HD64465 companion chip support
+ *
+ * by Greg Banks <gbanks@pocketpenguins.com>
+ * (c) 2000 PocketPenguins Inc.
+ *
+ * Derived from <asm/hd64461.h> which bore the message:
+ * Copyright (C) 2000 YAEGASHI Takeshi
+ */
+#include <asm/io.h>
+#include <asm/irq.h>
+
+/*
+ * Note that registers are defined here as virtual port numbers,
+ * which have no meaning except to get translated by hd64465_isa_port2addr()
+ * to an address in the range 0xb0000000-0xb3ffffff.  Note that
+ * this translation happens to consist of adding the lower 16 bits
+ * of the virtual port number to 0xb0000000.  Note also that the manual
+ * shows addresses as absolute physical addresses starting at 0x10000000,
+ * so e.g. the NIRR register is listed as 0x15000 here, 0x10005000 in the
+ * manual, and accessed using address 0xb0005000 - Greg.
+ */
+
+/* System registers */
+#define HD64465_REG_SRR     0x1000c 	/* System Revision Register */
+#define HD64465_REG_SDID    0x10010 	/* System Device ID Reg */
+#define     HD64465_SDID            0x8122  /* 64465 device ID */
+
+/* Power Management registers */
+#define HD64465_REG_SMSCR   0x10000 	/* System Module Standby Control Reg */
+#define	    HD64465_SMSCR_PS2ST     0x4000  /* PS/2 Standby */
+#define	    HD64465_SMSCR_ADCST     0x1000  /* ADC Standby */
+#define	    HD64465_SMSCR_UARTST    0x0800  /* UART Standby */
+#define	    HD64465_SMSCR_SCDIST    0x0200  /* Serial Codec Standby */
+#define	    HD64465_SMSCR_PPST	    0x0100  /* Parallel Port Standby */
+#define	    HD64465_SMSCR_PC0ST     0x0040  /* PCMCIA0 Standby */
+#define	    HD64465_SMSCR_PC1ST     0x0020  /* PCMCIA1 Standby */
+#define	    HD64465_SMSCR_AFEST     0x0010  /* AFE Standby */
+#define	    HD64465_SMSCR_TM0ST     0x0008  /* Timer0 Standby */
+#define	    HD64465_SMSCR_TM1ST     0x0004  /* Timer1 Standby */
+#define	    HD64465_SMSCR_IRDAST    0x0002  /* IRDA Standby */
+#define	    HD64465_SMSCR_KBCST     0x0001  /* Keyboard Controller Standby */
+ 
+/* Interrupt Controller registers */
+#define HD64465_REG_NIRR    0x15000  	/* Interrupt Request Register */
+#define HD64465_REG_NIMR    0x15002  	/* Interrupt Mask Register */
+#define HD64465_REG_NITR    0x15004  	/* Interrupt Trigger Mode Register */
+
+/* Timer registers */
+#define HD64465_REG_TCVR1   0x16000  	/* Timer 1 constant value register  */
+#define HD64465_REG_TCVR0   0x16002	/* Timer 0 constant value register  */
+#define HD64465_REG_TRVR1   0x16004	/* Timer 1 read value register  */
+#define HD64465_REG_TRVR0   0x16006	/* Timer 0 read value register  */
+#define HD64465_REG_TCR1    0x16008	/* Timer 1 control register  */
+#define HD64465_REG_TCR0    0x1600A	/* Timer 0 control register  */
+#define	    HD64465_TCR_EADT 	0x10	    /* Enable ADTRIG# signal */
+#define	    HD64465_TCR_ETMO 	0x08	    /* Enable TMO signal */
+#define	    HD64465_TCR_PST_MASK 0x06	    /* Clock Prescale */
+#define	    HD64465_TCR_PST_1 	0x06	    /* 1:1 */
+#define	    HD64465_TCR_PST_4 	0x04	    /* 1:4 */
+#define	    HD64465_TCR_PST_8 	0x02	    /* 1:8 */
+#define	    HD64465_TCR_PST_16 	0x00	    /* 1:16 */
+#define	    HD64465_TCR_TSTP 	0x01	    /* Start/Stop timer */
+#define HD64465_REG_TIRR    0x1600C	/* Timer interrupt request register  */
+#define HD64465_REG_TIDR    0x1600E	/* Timer interrupt disable register  */
+#define HD64465_REG_PWM1CS  0x16010	/* PWM 1 clock scale register  */
+#define HD64465_REG_PWM1LPC 0x16012	/* PWM 1 low pulse width counter register  */
+#define HD64465_REG_PWM1HPC 0x16014	/* PWM 1 high pulse width counter register  */
+#define HD64465_REG_PWM0CS  0x16018	/* PWM 0 clock scale register  */
+#define HD64465_REG_PWM0LPC 0x1601A	/* PWM 0 low pulse width counter register  */
+#define HD64465_REG_PWM0HPC 0x1601C	/* PWM 0 high pulse width counter register  */
+
+/* Analog/Digital Converter registers */
+#define HD64465_REG_ADDRA   0x1E000	/* A/D data register A */
+#define HD64465_REG_ADDRB   0x1E002	/* A/D data register B */
+#define HD64465_REG_ADDRC   0x1E004	/* A/D data register C */
+#define HD64465_REG_ADDRD   0x1E006	/* A/D data register D */
+#define HD64465_REG_ADCSR   0x1E008	/* A/D control/status register */
+#define     HD64465_ADCSR_ADF	    0x80    /* A/D End Flag */
+#define     HD64465_ADCSR_ADST	    0x40    /* A/D Start Flag */
+#define     HD64465_ADCSR_ADIS	    0x20    /* A/D Interrupt Status */
+#define     HD64465_ADCSR_TRGE	    0x10    /* A/D Trigger Enable */
+#define     HD64465_ADCSR_ADIE	    0x08    /* A/D Interrupt Enable */
+#define     HD64465_ADCSR_SCAN	    0x04    /* A/D Scan Mode */
+#define     HD64465_ADCSR_CH_MASK   0x03    /* A/D Channel */
+#define HD64465_REG_ADCALCR 0x1E00A  	/* A/D calibration sample control */
+#define HD64465_REG_ADCAL   0x1E00C  	/* A/D calibration data register */
+
+
+/* General Purpose I/O ports registers */
+#define HD64465_REG_GPACR   0x14000  	/* Port A Control Register */
+#define HD64465_REG_GPBCR   0x14002  	/* Port B Control Register */
+#define HD64465_REG_GPCCR   0x14004  	/* Port C Control Register */
+#define HD64465_REG_GPDCR   0x14006  	/* Port D Control Register */
+#define HD64465_REG_GPECR   0x14008  	/* Port E Control Register */
+#define HD64465_REG_GPADR   0x14010  	/* Port A Data Register */
+#define HD64465_REG_GPBDR   0x14012  	/* Port B Data Register */
+#define HD64465_REG_GPCDR   0x14014  	/* Port C Data Register */
+#define HD64465_REG_GPDDR   0x14016  	/* Port D Data Register */
+#define HD64465_REG_GPEDR   0x14018  	/* Port E Data Register */
+#define HD64465_REG_GPAICR  0x14020  	/* Port A Interrupt Control Register */
+#define HD64465_REG_GPBICR  0x14022  	/* Port B Interrupt Control Register */
+#define HD64465_REG_GPCICR  0x14024  	/* Port C Interrupt Control Register */
+#define HD64465_REG_GPDICR  0x14026  	/* Port D Interrupt Control Register */
+#define HD64465_REG_GPEICR  0x14028  	/* Port E Interrupt Control Register */
+#define HD64465_REG_GPAISR  0x14040  	/* Port A Interrupt Status Register */
+#define HD64465_REG_GPBISR  0x14042  	/* Port B Interrupt Status Register */
+#define HD64465_REG_GPCISR  0x14044  	/* Port C Interrupt Status Register */
+#define HD64465_REG_GPDISR  0x14046  	/* Port D Interrupt Status Register */
+#define HD64465_REG_GPEISR  0x14048  	/* Port E Interrupt Status Register */
+
+/* PCMCIA bridge interface */
+#define HD64465_REG_PCC0ISR	0x12000	/* socket 0 interface status */ 
+#define     HD64465_PCCISR_PREADY   	 0x80    /* mem card ready / io card IREQ */
+#define     HD64465_PCCISR_PIREQ    	 0x80
+#define     HD64465_PCCISR_PMWP     	 0x40    /* mem card write-protected */
+#define     HD64465_PCCISR_PVS2 	 0x20    /* voltage select pin 2 */
+#define     HD64465_PCCISR_PVS1 	 0x10    /* voltage select pin 1 */
+#define     HD64465_PCCISR_PCD_MASK 	 0x0c    /* card detect */
+#define     HD64465_PCCISR_PBVD_MASK     0x03    /* battery voltage */
+#define     HD64465_PCCISR_PBVD_BATGOOD  0x03    /* battery good */
+#define     HD64465_PCCISR_PBVD_BATWARN  0x01    /* battery low warning */
+#define     HD64465_PCCISR_PBVD_BATDEAD1 0x02    /* battery dead */
+#define     HD64465_PCCISR_PBVD_BATDEAD2 0x00    /* battery dead */
+#define HD64465_REG_PCC0GCR	0x12002	/* socket 0 general control */ 
+#define     HD64465_PCCGCR_PDRV   	 0x80    /* output drive */
+#define     HD64465_PCCGCR_PCCR   	 0x40    /* PC card reset */
+#define     HD64465_PCCGCR_PCCT   	 0x20    /* PC card type, 1=IO&mem, 0=mem */
+#define     HD64465_PCCGCR_PVCC0   	 0x10    /* voltage control pin VCC0SEL0 */
+#define     HD64465_PCCGCR_PMMOD   	 0x08    /* memory mode */
+#define     HD64465_PCCGCR_PPA25   	 0x04    /* pin A25 */
+#define     HD64465_PCCGCR_PPA24   	 0x02    /* pin A24 */
+#define     HD64465_PCCGCR_PREG   	 0x01    /* ping PCC0REG# */
+#define HD64465_REG_PCC0CSCR	0x12004	/* socket 0 card status change */ 
+#define     HD64465_PCCCSCR_PSCDI   	 0x80    /* sw card detect intr */
+#define     HD64465_PCCCSCR_PSWSEL   	 0x40    /* power select */
+#define     HD64465_PCCCSCR_PIREQ   	 0x20    /* IREQ intr req */
+#define     HD64465_PCCCSCR_PSC   	 0x10    /* STSCHG (status change) pin */
+#define     HD64465_PCCCSCR_PCDC   	 0x08    /* CD (card detect) change */
+#define     HD64465_PCCCSCR_PRC   	 0x04    /* ready change */
+#define     HD64465_PCCCSCR_PBW   	 0x02    /* battery warning change */
+#define     HD64465_PCCCSCR_PBD   	 0x01    /* battery dead change */
+#define HD64465_REG_PCC0CSCIER	0x12006	/* socket 0 card status change interrupt enable */ 
+#define     HD64465_PCCCSCIER_PCRE   	 0x80    /* change reset enable */
+#define     HD64465_PCCCSCIER_PIREQE_MASK   	0x60   /* IREQ enable */
+#define     HD64465_PCCCSCIER_PIREQE_DISABLED	0x00   /* IREQ disabled */
+#define     HD64465_PCCCSCIER_PIREQE_LEVEL  	0x20   /* IREQ level-triggered */
+#define     HD64465_PCCCSCIER_PIREQE_FALLING	0x40   /* IREQ falling-edge-trig */
+#define     HD64465_PCCCSCIER_PIREQE_RISING 	0x60   /* IREQ rising-edge-trig */
+#define     HD64465_PCCCSCIER_PSCE   	 0x10    /* status change enable */
+#define     HD64465_PCCCSCIER_PCDE   	 0x08    /* card detect change enable */
+#define     HD64465_PCCCSCIER_PRE   	 0x04    /* ready change enable */
+#define     HD64465_PCCCSCIER_PBWE   	 0x02    /* battery warn change enable */
+#define     HD64465_PCCCSCIER_PBDE   	 0x01    /* battery dead change enable*/
+#define HD64465_REG_PCC0SCR	0x12008	/* socket 0 software control */ 
+#define     HD64465_PCCSCR_SHDN   	 0x10    /* TPS2206 SHutDowN pin */
+#define     HD64465_PCCSCR_SWP   	 0x01    /* write protect */
+#define HD64465_REG_PCCPSR	0x1200A	/* serial power switch control */ 
+#define HD64465_REG_PCC1ISR	0x12010	/* socket 1 interface status */ 
+#define HD64465_REG_PCC1GCR	0x12012	/* socket 1 general control */ 
+#define HD64465_REG_PCC1CSCR	0x12014	/* socket 1 card status change */ 
+#define HD64465_REG_PCC1CSCIER	0x12016	/* socket 1 card status change interrupt enable */ 
+#define HD64465_REG_PCC1SCR	0x12018	/* socket 1 software control */ 
+
+
+/* PS/2 Keyboard and mouse controller -- *not* register compatible */
+#define HD64465_REG_KBCSR   	0x1dc00 /* Keyboard Control/Status reg */
+#define     HD64465_KBCSR_KBCIE   	 0x8000    /* KBCK Input Enable */
+#define     HD64465_KBCSR_KBCOE   	 0x4000    /* KBCK Output Enable */
+#define     HD64465_KBCSR_KBDOE   	 0x2000    /* KB DATA Output Enable */
+#define     HD64465_KBCSR_KBCD   	 0x1000    /* KBCK Driven */
+#define     HD64465_KBCSR_KBDD   	 0x0800    /* KB DATA Driven */
+#define     HD64465_KBCSR_KBCS   	 0x0400    /* KBCK pin Status */
+#define     HD64465_KBCSR_KBDS   	 0x0200    /* KB DATA pin Status */
+#define     HD64465_KBCSR_KBDP   	 0x0100    /* KB DATA Parity bit */
+#define     HD64465_KBCSR_KBD_MASK   	 0x00ff    /* KD DATA shift reg */
+#define HD64465_REG_KBISR   	0x1dc04 /* Keyboard Interrupt Status reg */
+#define     HD64465_KBISR_KBRDF   	 0x0001    /* KB Received Data Full */
+#define HD64465_REG_MSCSR   	0x1dc10 /* Mouse Control/Status reg */
+#define HD64465_REG_MSISR   	0x1dc14 /* Mouse Interrupt Status reg */
+
+
+/*
+ * Logical address at which the HD64465 is mapped.  Note that this
+ * should always be in the P2 segment (uncached and untranslated).
+ */
+#ifndef CONFIG_HD64465_IOBASE
+#define CONFIG_HD64465_IOBASE	0xb0000000
+#endif
+/*
+ * The HD64465 multiplexes all its modules' interrupts onto
+ * this single interrupt.
+ */
+#ifndef CONFIG_HD64465_IRQ
+#define CONFIG_HD64465_IRQ	5
+#endif
+
+
+#define _HD64465_IO_MASK	0xf8000000
+#define is_hd64465_addr(addr) \
+	((addr & _HD64465_IO_MASK) == (CONFIG_HD64465_IOBASE & _HD64465_IO_MASK))
+
+/*
+ * A range of 16 virtual interrupts generated by
+ * demuxing the HD64465 muxed interrupt.
+ */
+#define HD64465_IRQ_BASE	OFFCHIP_IRQ_BASE
+#define HD64465_IRQ_NUM 	16
+#define HD64465_IRQ_ADC     	(HD64465_IRQ_BASE+0)
+#define HD64465_IRQ_USB     	(HD64465_IRQ_BASE+1)
+#define HD64465_IRQ_SCDI    	(HD64465_IRQ_BASE+2)
+#define HD64465_IRQ_PARALLEL	(HD64465_IRQ_BASE+3)
+/* bit 4 is reserved */
+#define HD64465_IRQ_UART    	(HD64465_IRQ_BASE+5)
+#define HD64465_IRQ_IRDA    	(HD64465_IRQ_BASE+6)
+#define HD64465_IRQ_PS2MOUSE	(HD64465_IRQ_BASE+7)
+#define HD64465_IRQ_KBC     	(HD64465_IRQ_BASE+8)
+#define HD64465_IRQ_TIMER1   	(HD64465_IRQ_BASE+9)
+#define HD64465_IRQ_TIMER0  	(HD64465_IRQ_BASE+10)
+#define HD64465_IRQ_GPIO    	(HD64465_IRQ_BASE+11)
+#define HD64465_IRQ_AFE     	(HD64465_IRQ_BASE+12)
+#define HD64465_IRQ_PCMCIA1 	(HD64465_IRQ_BASE+13)
+#define HD64465_IRQ_PCMCIA0 	(HD64465_IRQ_BASE+14)
+#define HD64465_IRQ_PS2KBD     	(HD64465_IRQ_BASE+15)
+
+/* Constants for PCMCIA mappings */
+#define HD64465_PCC_WINDOW	0x01000000
+
+#define HD64465_PCC0_BASE	0xb8000000	/* area 6 */
+#define HD64465_PCC0_ATTR	(HD64465_PCC0_BASE)
+#define HD64465_PCC0_COMM	(HD64465_PCC0_BASE+HD64465_PCC_WINDOW)
+#define HD64465_PCC0_IO		(HD64465_PCC0_BASE+2*HD64465_PCC_WINDOW)
+
+#define HD64465_PCC1_BASE	0xb4000000	/* area 5 */
+#define HD64465_PCC1_ATTR	(HD64465_PCC1_BASE)
+#define HD64465_PCC1_COMM	(HD64465_PCC1_BASE+HD64465_PCC_WINDOW)
+#define HD64465_PCC1_IO		(HD64465_PCC1_BASE+2*HD64465_PCC_WINDOW)
+
+/*
+ * Base of USB controller interface (as memory)
+ */
+#define HD64465_USB_BASE    	(CONFIG_HD64465_IOBASE+0xb000)
+#define HD64465_USB_LEN    	0x1000
+/*
+ * Base of embedded SRAM, used for USB controller.
+ */
+#define HD64465_SRAM_BASE    	(CONFIG_HD64465_IOBASE+0x9000)
+#define HD64465_SRAM_LEN    	0x1000
+
+
+
+#endif /* _ASM_SH_HD64465_  */
diff --git a/arch/sh/include/asm/hd64465/io.h b/arch/sh/include/asm/hd64465/io.h
new file mode 100644
index 000000000000..139f1472e5bb
--- /dev/null
+++ b/arch/sh/include/asm/hd64465/io.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-sh/hd64465/io.h
+ *
+ * By Greg Banks <gbanks@pocketpenguins.com>
+ * (c) 2000 PocketPenguins Inc.
+ *
+ * Derived from io_hd64461.h, which bore the message:
+ * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for an HD64465 "Windows CE Intelligent Peripheral Controller".
+ */
+
+#ifndef _ASM_SH_IO_HD64465_H
+#define _ASM_SH_IO_HD64465_H
+
+extern unsigned char hd64465_inb(unsigned long port);
+extern unsigned short hd64465_inw(unsigned long port);
+extern unsigned int hd64465_inl(unsigned long port);
+
+extern void hd64465_outb(unsigned char value, unsigned long port);
+extern void hd64465_outw(unsigned short value, unsigned long port);
+extern void hd64465_outl(unsigned int value, unsigned long port);
+
+extern unsigned char hd64465_inb_p(unsigned long port);
+extern void hd64465_outb_p(unsigned char value, unsigned long port);
+
+extern unsigned long hd64465_isa_port2addr(unsigned long offset);
+extern int hd64465_irq_demux(int irq);
+/* Provision for generic secondary demux step -- used by PCMCIA code */
+extern void hd64465_register_irq_demux(int irq,
+		int (*demux)(int irq, void *dev), void *dev);
+extern void hd64465_unregister_irq_demux(int irq);
+/* Set this variable to 1 to see port traffic */
+extern int hd64465_io_debug;
+/* Map a range of ports to a range of kernel virtual memory.
+ */
+extern void hd64465_port_map(unsigned short baseport, unsigned int nports,
+			     unsigned long addr, unsigned char shift);
+extern void hd64465_port_unmap(unsigned short baseport, unsigned int nports);
+
+#endif /* _ASM_SH_IO_HD64465_H */
diff --git a/arch/sh/include/asm/heartbeat.h b/arch/sh/include/asm/heartbeat.h
new file mode 100644
index 000000000000..724a43ed245e
--- /dev/null
+++ b/arch/sh/include/asm/heartbeat.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_SH_HEARTBEAT_H
+#define __ASM_SH_HEARTBEAT_H
+
+#include <linux/timer.h>
+
+#define HEARTBEAT_INVERTED	(1 << 0)
+
+struct heartbeat_data {
+	void __iomem *base;
+	unsigned char *bit_pos;
+	unsigned int nr_bits;
+	struct timer_list timer;
+	unsigned int regsize;
+	unsigned long flags;
+};
+
+#endif /* __ASM_SH_HEARTBEAT_H */
diff --git a/arch/sh/include/asm/hp6xx.h b/arch/sh/include/asm/hp6xx.h
new file mode 100644
index 000000000000..0d4165a32dcd
--- /dev/null
+++ b/arch/sh/include/asm/hp6xx.h
@@ -0,0 +1,58 @@
+#ifndef __ASM_SH_HP6XX_H
+#define __ASM_SH_HP6XX_H
+
+/*
+ * Copyright (C) 2003, 2004, 2005  Andriy Skulysh
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#define HP680_BTN_IRQ		32	/* IRQ0_IRQ */
+#define HP680_TS_IRQ		35	/* IRQ3_IRQ */
+#define HP680_HD64461_IRQ	36	/* IRQ4_IRQ */
+
+#define DAC_LCD_BRIGHTNESS	0
+#define DAC_SPEAKER_VOLUME	1
+
+#define PGDR_OPENED		0x01
+#define PGDR_MAIN_BATTERY_OUT	0x04
+#define PGDR_PLAY_BUTTON	0x08
+#define PGDR_REWIND_BUTTON	0x10
+#define PGDR_RECORD_BUTTON	0x20
+
+#define PHDR_TS_PEN_DOWN	0x08
+
+#define PJDR_LED_BLINK		0x02
+
+#define PKDR_LED_GREEN		0x10
+
+#define SCPDR_TS_SCAN_ENABLE	0x20
+#define SCPDR_TS_SCAN_Y		0x02
+#define SCPDR_TS_SCAN_X		0x01
+
+#define SCPCR_TS_ENABLE		0x405
+#define SCPCR_TS_MASK		0xc0f
+
+#define ADC_CHANNEL_TS_Y	1
+#define ADC_CHANNEL_TS_X	2
+#define ADC_CHANNEL_BATTERY	3
+#define ADC_CHANNEL_BACKUP	4
+#define ADC_CHANNEL_CHARGE	5
+
+#define HD64461_GPADR_SPEAKER	0x01
+#define HD64461_GPADR_PCMCIA0	(0x02|0x08)
+
+#define HD64461_GPBDR_LCDOFF	0x01
+#define HD64461_GPBDR_LCD_CONTRAST_MASK	0x78
+#define HD64461_GPBDR_LED_RED	0x80
+
+#include <asm/hd64461.h>
+#include <asm/io.h>
+
+#define PJDR	0xa4000130
+#define PKDR	0xa4000132
+
+#endif /* __ASM_SH_HP6XX_H */
diff --git a/arch/sh/include/asm/hugetlb.h b/arch/sh/include/asm/hugetlb.h
new file mode 100644
index 000000000000..967068fb79ac
--- /dev/null
+++ b/arch/sh/include/asm/hugetlb.h
@@ -0,0 +1,92 @@
+#ifndef _ASM_SH_HUGETLB_H
+#define _ASM_SH_HUGETLB_H
+
+#include <asm/page.h>
+
+
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+					 unsigned long addr,
+					 unsigned long len) {
+	return 0;
+}
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
+{
+	if (len & ~HPAGE_MASK)
+		return -EINVAL;
+	if (addr & ~HPAGE_MASK)
+		return -EINVAL;
+	return 0;
+}
+
+static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) {
+}
+
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
+					  unsigned long addr, unsigned long end,
+					  unsigned long floor,
+					  unsigned long ceiling)
+{
+	free_pgd_range(tlb, addr, end, floor, ceiling);
+}
+
+static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+				   pte_t *ptep, pte_t pte)
+{
+	set_pte_at(mm, addr, ptep, pte);
+}
+
+static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
+					    unsigned long addr, pte_t *ptep)
+{
+	return ptep_get_and_clear(mm, addr, ptep);
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	return pte_wrprotect(pte);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	ptep_set_wrprotect(mm, addr, ptep);
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+					     unsigned long addr, pte_t *ptep,
+					     pte_t pte, int dirty)
+{
+	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	return *ptep;
+}
+
+static inline int arch_prepare_hugepage(struct page *page)
+{
+	return 0;
+}
+
+static inline void arch_release_hugepage(struct page *page)
+{
+}
+
+#endif /* _ASM_SH_HUGETLB_H */
diff --git a/arch/sh/include/asm/hw_irq.h b/arch/sh/include/asm/hw_irq.h
new file mode 100644
index 000000000000..d557b00111bf
--- /dev/null
+++ b/arch/sh/include/asm/hw_irq.h
@@ -0,0 +1,123 @@
+#ifndef __ASM_SH_HW_IRQ_H
+#define __ASM_SH_HW_IRQ_H
+
+#include <linux/init.h>
+#include <asm/atomic.h>
+
+extern atomic_t irq_err_count;
+
+struct ipr_data {
+	unsigned char irq;
+	unsigned char ipr_idx;		/* Index for the IPR registered */
+	unsigned char shift;		/* Number of bits to shift the data */
+	unsigned char priority;		/* The priority */
+};
+
+struct ipr_desc {
+	unsigned long *ipr_offsets;
+	unsigned int nr_offsets;
+	struct ipr_data *ipr_data;
+	unsigned int nr_irqs;
+	struct irq_chip chip;
+};
+
+void register_ipr_controller(struct ipr_desc *);
+
+typedef unsigned char intc_enum;
+
+struct intc_vect {
+	intc_enum enum_id;
+	unsigned short vect;
+};
+
+#define INTC_VECT(enum_id, vect) { enum_id, vect }
+#define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq))
+
+struct intc_group {
+	intc_enum enum_id;
+	intc_enum enum_ids[32];
+};
+
+#define INTC_GROUP(enum_id, ids...) { enum_id, { ids } }
+
+struct intc_mask_reg {
+	unsigned long set_reg, clr_reg, reg_width;
+	intc_enum enum_ids[32];
+#ifdef CONFIG_SMP
+	unsigned long smp;
+#endif
+};
+
+struct intc_prio_reg {
+	unsigned long set_reg, clr_reg, reg_width, field_width;
+	intc_enum enum_ids[16];
+#ifdef CONFIG_SMP
+	unsigned long smp;
+#endif
+};
+
+struct intc_sense_reg {
+	unsigned long reg, reg_width, field_width;
+	intc_enum enum_ids[16];
+};
+
+#ifdef CONFIG_SMP
+#define INTC_SMP(stride, nr) .smp = (stride) | ((nr) << 8)
+#else
+#define INTC_SMP(stride, nr)
+#endif
+
+struct intc_desc {
+	struct intc_vect *vectors;
+	unsigned int nr_vectors;
+	struct intc_group *groups;
+	unsigned int nr_groups;
+	struct intc_mask_reg *mask_regs;
+	unsigned int nr_mask_regs;
+	struct intc_prio_reg *prio_regs;
+	unsigned int nr_prio_regs;
+	struct intc_sense_reg *sense_regs;
+	unsigned int nr_sense_regs;
+	char *name;
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
+	struct intc_mask_reg *ack_regs;
+	unsigned int nr_ack_regs;
+#endif
+};
+
+#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a)
+#define DECLARE_INTC_DESC(symbol, chipname, vectors, groups,		\
+	mask_regs, prio_regs, sense_regs)				\
+struct intc_desc symbol __initdata = {					\
+	_INTC_ARRAY(vectors), _INTC_ARRAY(groups),			\
+	_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),			\
+	_INTC_ARRAY(sense_regs),					\
+	chipname,							\
+}
+
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
+#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups,	\
+	mask_regs, prio_regs, sense_regs, ack_regs)			\
+struct intc_desc symbol __initdata = {					\
+	_INTC_ARRAY(vectors), _INTC_ARRAY(groups),			\
+	_INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs),			\
+	_INTC_ARRAY(sense_regs),					\
+	chipname,							\
+	_INTC_ARRAY(ack_regs),						\
+}
+#endif
+
+void __init register_intc_controller(struct intc_desc *desc);
+int intc_set_priority(unsigned int irq, unsigned int prio);
+
+void __init plat_irq_setup(void);
+#ifdef CONFIG_CPU_SH3
+void __init plat_irq_setup_sh3(void);
+#endif
+
+enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210,
+       IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK,
+       IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 };
+void __init plat_irq_setup_pins(int mode);
+
+#endif /* __ASM_SH_HW_IRQ_H */
diff --git a/arch/sh/include/asm/i2c-sh7760.h b/arch/sh/include/asm/i2c-sh7760.h
new file mode 100644
index 000000000000..24182116711f
--- /dev/null
+++ b/arch/sh/include/asm/i2c-sh7760.h
@@ -0,0 +1,22 @@
+/*
+ * MMIO/IRQ and platform data for SH7760 I2C channels
+ */
+
+#ifndef _I2C_SH7760_H_
+#define _I2C_SH7760_H_
+
+#define SH7760_I2C_DEVNAME	"sh7760-i2c"
+
+#define SH7760_I2C0_MMIO	0xFE140000
+#define SH7760_I2C0_MMIOEND	0xFE14003B
+#define SH7760_I2C0_IRQ		62
+
+#define SH7760_I2C1_MMIO	0xFE150000
+#define SH7760_I2C1_MMIOEND	0xFE15003B
+#define SH7760_I2C1_IRQ		63
+
+struct sh7760_i2c_platdata {
+	unsigned int speed_khz;
+};
+
+#endif
diff --git a/arch/sh/include/asm/ilsel.h b/arch/sh/include/asm/ilsel.h
new file mode 100644
index 000000000000..e3d304b280f6
--- /dev/null
+++ b/arch/sh/include/asm/ilsel.h
@@ -0,0 +1,45 @@
+#ifndef __ASM_SH_ILSEL_H
+#define __ASM_SH_ILSEL_H
+
+typedef enum {
+	ILSEL_NONE,
+	ILSEL_LAN,
+	ILSEL_USBH_I,
+	ILSEL_USBH_S,
+	ILSEL_USBH_V,
+	ILSEL_RTC,
+	ILSEL_USBP_I,
+	ILSEL_USBP_S,
+	ILSEL_USBP_V,
+	ILSEL_KEY,
+
+	/*
+	 * ILSEL Aliases - corner cases for interleaved level tables.
+	 *
+	 * Someone thought this was a good idea and less hassle than
+	 * demuxing a shared vector, really.
+	 */
+
+	/* ILSEL0 and 2 */
+	ILSEL_FPGA0,
+	ILSEL_FPGA1,
+	ILSEL_EX1,
+	ILSEL_EX2,
+	ILSEL_EX3,
+	ILSEL_EX4,
+
+	/* ILSEL1 and 3 */
+	ILSEL_FPGA2 = ILSEL_FPGA0,
+	ILSEL_FPGA3 = ILSEL_FPGA1,
+	ILSEL_EX5 = ILSEL_EX1,
+	ILSEL_EX6 = ILSEL_EX2,
+	ILSEL_EX7 = ILSEL_EX3,
+	ILSEL_EX8 = ILSEL_EX4,
+} ilsel_source_t;
+
+/* arch/sh/boards/renesas/x3proto/ilsel.c */
+int ilsel_enable(ilsel_source_t set);
+int ilsel_enable_fixed(ilsel_source_t set, unsigned int level);
+void ilsel_disable(unsigned int irq);
+
+#endif /* __ASM_SH_ILSEL_H */
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
new file mode 100644
index 000000000000..a4fbf0c84fb1
--- /dev/null
+++ b/arch/sh/include/asm/io.h
@@ -0,0 +1,366 @@
+#ifndef __ASM_SH_IO_H
+#define __ASM_SH_IO_H
+
+/*
+ * Convention:
+ *    read{b,w,l}/write{b,w,l} are for PCI,
+ *    while in{b,w,l}/out{b,w,l} are for ISA
+ * These may (will) be platform specific function.
+ * In addition we have 'pausing' versions: in{b,w,l}_p/out{b,w,l}_p
+ * and 'string' versions: ins{b,w,l}/outs{b,w,l}
+ * For read{b,w,l} and write{b,w,l} there are also __raw versions, which
+ * do not have a memory barrier after them.
+ *
+ * In addition, we have
+ *   ctrl_in{b,w,l}/ctrl_out{b,w,l} for SuperH specific I/O.
+ *   which are processor specific.
+ */
+
+/*
+ * We follow the Alpha convention here:
+ *  __inb expands to an inline function call (which calls via the mv)
+ *  _inb  is a real function call (note ___raw fns are _ version of __raw)
+ *  inb   by default expands to _inb, but the machine specific code may
+ *        define it to __inb if it chooses.
+ */
+#include <asm/cache.h>
+#include <asm/system.h>
+#include <asm/addrspace.h>
+#include <asm/machvec.h>
+#include <asm/pgtable.h>
+#include <asm-generic/iomap.h>
+
+#ifdef __KERNEL__
+
+/*
+ * Depending on which platform we are running on, we need different
+ * I/O functions.
+ */
+#define __IO_PREFIX	generic
+#include <asm/io_generic.h>
+#include <asm/io_trapped.h>
+
+#define maybebadio(port) \
+  printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \
+	 __FUNCTION__, __LINE__, (port), (u32)__builtin_return_address(0))
+
+/*
+ * Since boards are able to define their own set of I/O routines through
+ * their respective machine vector, we always wrap through the mv.
+ *
+ * Also, in the event that a board hasn't provided its own definition for
+ * a given routine, it will be wrapped to generic code at run-time.
+ */
+
+#define __inb(p)	sh_mv.mv_inb((p))
+#define __inw(p)	sh_mv.mv_inw((p))
+#define __inl(p)	sh_mv.mv_inl((p))
+#define __outb(x,p)	sh_mv.mv_outb((x),(p))
+#define __outw(x,p)	sh_mv.mv_outw((x),(p))
+#define __outl(x,p)	sh_mv.mv_outl((x),(p))
+
+#define __inb_p(p)	sh_mv.mv_inb_p((p))
+#define __inw_p(p)	sh_mv.mv_inw_p((p))
+#define __inl_p(p)	sh_mv.mv_inl_p((p))
+#define __outb_p(x,p)	sh_mv.mv_outb_p((x),(p))
+#define __outw_p(x,p)	sh_mv.mv_outw_p((x),(p))
+#define __outl_p(x,p)	sh_mv.mv_outl_p((x),(p))
+
+#define __insb(p,b,c)	sh_mv.mv_insb((p), (b), (c))
+#define __insw(p,b,c)	sh_mv.mv_insw((p), (b), (c))
+#define __insl(p,b,c)	sh_mv.mv_insl((p), (b), (c))
+#define __outsb(p,b,c)	sh_mv.mv_outsb((p), (b), (c))
+#define __outsw(p,b,c)	sh_mv.mv_outsw((p), (b), (c))
+#define __outsl(p,b,c)	sh_mv.mv_outsl((p), (b), (c))
+
+#define __readb(a)	sh_mv.mv_readb((a))
+#define __readw(a)	sh_mv.mv_readw((a))
+#define __readl(a)	sh_mv.mv_readl((a))
+#define __writeb(v,a)	sh_mv.mv_writeb((v),(a))
+#define __writew(v,a)	sh_mv.mv_writew((v),(a))
+#define __writel(v,a)	sh_mv.mv_writel((v),(a))
+
+#define inb		__inb
+#define inw		__inw
+#define inl		__inl
+#define outb		__outb
+#define outw		__outw
+#define outl		__outl
+
+#define inb_p		__inb_p
+#define inw_p		__inw_p
+#define inl_p		__inl_p
+#define outb_p		__outb_p
+#define outw_p		__outw_p
+#define outl_p		__outl_p
+
+#define insb		__insb
+#define insw		__insw
+#define insl		__insl
+#define outsb		__outsb
+#define outsw		__outsw
+#define outsl		__outsl
+
+#define __raw_readb(a)		__readb((void __iomem *)(a))
+#define __raw_readw(a)		__readw((void __iomem *)(a))
+#define __raw_readl(a)		__readl((void __iomem *)(a))
+#define __raw_writeb(v, a)	__writeb(v, (void __iomem *)(a))
+#define __raw_writew(v, a)	__writew(v, (void __iomem *)(a))
+#define __raw_writel(v, a)	__writel(v, (void __iomem *)(a))
+
+void __raw_writesl(unsigned long addr, const void *data, int longlen);
+void __raw_readsl(unsigned long addr, void *data, int longlen);
+
+/*
+ * The platform header files may define some of these macros to use
+ * the inlined versions where appropriate.  These macros may also be
+ * redefined by userlevel programs.
+ */
+#ifdef __readb
+# define readb(a)	({ unsigned int r_ = __raw_readb(a); mb(); r_; })
+#endif
+#ifdef __raw_readw
+# define readw(a)	({ unsigned int r_ = __raw_readw(a); mb(); r_; })
+#endif
+#ifdef __raw_readl
+# define readl(a)	({ unsigned int r_ = __raw_readl(a); mb(); r_; })
+#endif
+
+#ifdef __raw_writeb
+# define writeb(v,a)	({ __raw_writeb((v),(a)); mb(); })
+#endif
+#ifdef __raw_writew
+# define writew(v,a)	({ __raw_writew((v),(a)); mb(); })
+#endif
+#ifdef __raw_writel
+# define writel(v,a)	({ __raw_writel((v),(a)); mb(); })
+#endif
+
+#define __BUILD_MEMORY_STRING(bwlq, type)				\
+									\
+static inline void writes##bwlq(volatile void __iomem *mem,		\
+				const void *addr, unsigned int count)	\
+{									\
+	const volatile type *__addr = addr;				\
+									\
+	while (count--) {						\
+		__raw_write##bwlq(*__addr, mem);			\
+		__addr++;						\
+	}								\
+}									\
+									\
+static inline void reads##bwlq(volatile void __iomem *mem, void *addr,	\
+			       unsigned int count)			\
+{									\
+	volatile type *__addr = addr;					\
+									\
+	while (count--) {						\
+		*__addr = __raw_read##bwlq(mem);			\
+		__addr++;						\
+	}								\
+}
+
+__BUILD_MEMORY_STRING(b, u8)
+__BUILD_MEMORY_STRING(w, u16)
+#define writesl __raw_writesl
+#define readsl  __raw_readsl
+
+#define readb_relaxed(a) readb(a)
+#define readw_relaxed(a) readw(a)
+#define readl_relaxed(a) readl(a)
+
+/* Simple MMIO */
+#define ioread8(a)		readb(a)
+#define ioread16(a)		readw(a)
+#define ioread16be(a)		be16_to_cpu(__raw_readw((a)))
+#define ioread32(a)		readl(a)
+#define ioread32be(a)		be32_to_cpu(__raw_readl((a)))
+
+#define iowrite8(v,a)		writeb((v),(a))
+#define iowrite16(v,a)		writew((v),(a))
+#define iowrite16be(v,a)	__raw_writew(cpu_to_be16((v)),(a))
+#define iowrite32(v,a)		writel((v),(a))
+#define iowrite32be(v,a)	__raw_writel(cpu_to_be32((v)),(a))
+
+#define ioread8_rep(a, d, c)	readsb((a), (d), (c))
+#define ioread16_rep(a, d, c)	readsw((a), (d), (c))
+#define ioread32_rep(a, d, c)	readsl((a), (d), (c))
+
+#define iowrite8_rep(a, s, c)	writesb((a), (s), (c))
+#define iowrite16_rep(a, s, c)	writesw((a), (s), (c))
+#define iowrite32_rep(a, s, c)	writesl((a), (s), (c))
+
+#define mmiowb()	wmb()	/* synco on SH-4A, otherwise a nop */
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * This function provides a method for the generic case where a board-specific
+ * ioport_map simply needs to return the port + some arbitrary port base.
+ *
+ * We use this at board setup time to implicitly set the port base, and
+ * as a result, we can use the generic ioport_map.
+ */
+static inline void __set_io_port_base(unsigned long pbase)
+{
+	extern unsigned long generic_io_base;
+
+	generic_io_base = pbase;
+}
+
+#define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n))
+
+/* We really want to try and get these to memcpy etc */
+extern void memcpy_fromio(void *, volatile void __iomem *, unsigned long);
+extern void memcpy_toio(volatile void __iomem *, const void *, unsigned long);
+extern void memset_io(volatile void __iomem *, int, unsigned long);
+
+/* SuperH on-chip I/O functions */
+static inline unsigned char ctrl_inb(unsigned long addr)
+{
+	return *(volatile unsigned char*)addr;
+}
+
+static inline unsigned short ctrl_inw(unsigned long addr)
+{
+	return *(volatile unsigned short*)addr;
+}
+
+static inline unsigned int ctrl_inl(unsigned long addr)
+{
+	return *(volatile unsigned long*)addr;
+}
+
+static inline unsigned long long ctrl_inq(unsigned long addr)
+{
+	return *(volatile unsigned long long*)addr;
+}
+
+static inline void ctrl_outb(unsigned char b, unsigned long addr)
+{
+	*(volatile unsigned char*)addr = b;
+}
+
+static inline void ctrl_outw(unsigned short b, unsigned long addr)
+{
+	*(volatile unsigned short*)addr = b;
+}
+
+static inline void ctrl_outl(unsigned int b, unsigned long addr)
+{
+        *(volatile unsigned long*)addr = b;
+}
+
+static inline void ctrl_outq(unsigned long long b, unsigned long addr)
+{
+	*(volatile unsigned long long*)addr = b;
+}
+
+static inline void ctrl_delay(void)
+{
+#ifdef P2SEG
+	ctrl_inw(P2SEG);
+#endif
+}
+
+/* Quad-word real-mode I/O, don't ask.. */
+unsigned long long peek_real_address_q(unsigned long long addr);
+unsigned long long poke_real_address_q(unsigned long long addr,
+				       unsigned long long val);
+
+#if !defined(CONFIG_MMU)
+#define virt_to_phys(address)	((unsigned long)(address))
+#define phys_to_virt(address)	((void *)(address))
+#else
+#define virt_to_phys(address)	(__pa(address))
+#define phys_to_virt(address)	(__va(address))
+#endif
+
+/*
+ * On 32-bit SH, we traditionally have the whole physical address space
+ * mapped at all times (as MIPS does), so "ioremap()" and "iounmap()" do
+ * not need to do anything but place the address in the proper segment.
+ * This is true for P1 and P2 addresses, as well as some P3 ones.
+ * However, most of the P3 addresses and newer cores using extended
+ * addressing need to map through page tables, so the ioremap()
+ * implementation becomes a bit more complicated.
+ *
+ * See arch/sh/mm/ioremap.c for additional notes on this.
+ *
+ * We cheat a bit and always return uncachable areas until we've fixed
+ * the drivers to handle caching properly.
+ *
+ * On the SH-5 the concept of segmentation in the 1:1 PXSEG sense simply
+ * doesn't exist, so everything must go through page tables.
+ */
+#ifdef CONFIG_MMU
+void __iomem *__ioremap(unsigned long offset, unsigned long size,
+			unsigned long flags);
+void __iounmap(void __iomem *addr);
+
+/* arch/sh/mm/ioremap_64.c */
+unsigned long onchip_remap(unsigned long addr, unsigned long size,
+			   const char *name);
+extern void onchip_unmap(unsigned long vaddr);
+#else
+#define __ioremap(offset, size, flags)	((void __iomem *)(offset))
+#define __iounmap(addr)			do { } while (0)
+#define onchip_remap(addr, size, name)	(addr)
+#define onchip_unmap(addr)		do { } while (0)
+#endif /* CONFIG_MMU */
+
+static inline void __iomem *
+__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags)
+{
+#ifdef CONFIG_SUPERH32
+	unsigned long last_addr = offset + size - 1;
+#endif
+	void __iomem *ret;
+
+	ret = __ioremap_trapped(offset, size);
+	if (ret)
+		return ret;
+
+#ifdef CONFIG_SUPERH32
+	/*
+	 * For P1 and P2 space this is trivial, as everything is already
+	 * mapped. Uncached access for P1 addresses are done through P2.
+	 * In the P3 case or for addresses outside of the 29-bit space,
+	 * mapping must be done by the PMB or by using page tables.
+	 */
+	if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) {
+		if (unlikely(flags & _PAGE_CACHABLE))
+			return (void __iomem *)P1SEGADDR(offset);
+
+		return (void __iomem *)P2SEGADDR(offset);
+	}
+#endif
+
+	return __ioremap(offset, size, flags);
+}
+
+#define ioremap(offset, size)				\
+	__ioremap_mode((offset), (size), 0)
+#define ioremap_nocache(offset, size)			\
+	__ioremap_mode((offset), (size), 0)
+#define ioremap_cache(offset, size)			\
+	__ioremap_mode((offset), (size), _PAGE_CACHABLE)
+#define p3_ioremap(offset, size, flags)			\
+	__ioremap((offset), (size), (flags))
+#define iounmap(addr)					\
+	__iounmap((addr))
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_IO_H */
diff --git a/arch/sh/include/asm/io_generic.h b/arch/sh/include/asm/io_generic.h
new file mode 100644
index 000000000000..92fc6070d7b3
--- /dev/null
+++ b/arch/sh/include/asm/io_generic.h
@@ -0,0 +1,49 @@
+/*
+ * Trivial I/O routine definitions, intentionally meant to be included
+ * multiple times. Ugly I/O routine concatenation helpers taken from
+ * alpha. Must be included _before_ io.h to avoid preprocessor-induced
+ * routine mismatch.
+ */
+#define IO_CONCAT(a,b)	_IO_CONCAT(a,b)
+#define _IO_CONCAT(a,b)	a ## _ ## b
+
+#ifndef __IO_PREFIX
+#error "Don't include this header without a valid system prefix"
+#endif
+
+u8 IO_CONCAT(__IO_PREFIX,inb)(unsigned long);
+u16 IO_CONCAT(__IO_PREFIX,inw)(unsigned long);
+u32 IO_CONCAT(__IO_PREFIX,inl)(unsigned long);
+
+void IO_CONCAT(__IO_PREFIX,outb)(u8, unsigned long);
+void IO_CONCAT(__IO_PREFIX,outw)(u16, unsigned long);
+void IO_CONCAT(__IO_PREFIX,outl)(u32, unsigned long);
+
+u8 IO_CONCAT(__IO_PREFIX,inb_p)(unsigned long);
+u16 IO_CONCAT(__IO_PREFIX,inw_p)(unsigned long);
+u32 IO_CONCAT(__IO_PREFIX,inl_p)(unsigned long);
+void IO_CONCAT(__IO_PREFIX,outb_p)(u8, unsigned long);
+void IO_CONCAT(__IO_PREFIX,outw_p)(u16, unsigned long);
+void IO_CONCAT(__IO_PREFIX,outl_p)(u32, unsigned long);
+
+void IO_CONCAT(__IO_PREFIX,insb)(unsigned long, void *dst, unsigned long count);
+void IO_CONCAT(__IO_PREFIX,insw)(unsigned long, void *dst, unsigned long count);
+void IO_CONCAT(__IO_PREFIX,insl)(unsigned long, void *dst, unsigned long count);
+void IO_CONCAT(__IO_PREFIX,outsb)(unsigned long, const void *src, unsigned long count);
+void IO_CONCAT(__IO_PREFIX,outsw)(unsigned long, const void *src, unsigned long count);
+void IO_CONCAT(__IO_PREFIX,outsl)(unsigned long, const void *src, unsigned long count);
+
+u8 IO_CONCAT(__IO_PREFIX,readb)(void __iomem *);
+u16 IO_CONCAT(__IO_PREFIX,readw)(void __iomem *);
+u32 IO_CONCAT(__IO_PREFIX,readl)(void __iomem *);
+void IO_CONCAT(__IO_PREFIX,writeb)(u8, void __iomem *);
+void IO_CONCAT(__IO_PREFIX,writew)(u16, void __iomem *);
+void IO_CONCAT(__IO_PREFIX,writel)(u32, void __iomem *);
+
+void *IO_CONCAT(__IO_PREFIX,ioremap)(unsigned long offset, unsigned long size);
+void IO_CONCAT(__IO_PREFIX,iounmap)(void *addr);
+
+void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size);
+void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr);
+
+#undef __IO_PREFIX
diff --git a/arch/sh/include/asm/io_trapped.h b/arch/sh/include/asm/io_trapped.h
new file mode 100644
index 000000000000..f1251d4f0ba9
--- /dev/null
+++ b/arch/sh/include/asm/io_trapped.h
@@ -0,0 +1,58 @@
+#ifndef __ASM_SH_IO_TRAPPED_H
+#define __ASM_SH_IO_TRAPPED_H
+
+#include <linux/list.h>
+#include <linux/ioport.h>
+#include <asm/page.h>
+
+#define IO_TRAPPED_MAGIC 0xfeedbeef
+
+struct trapped_io {
+	unsigned int magic;
+	struct resource *resource;
+	unsigned int num_resources;
+	unsigned int minimum_bus_width;
+	struct list_head list;
+	void __iomem *virt_base;
+} __aligned(PAGE_SIZE);
+
+#ifdef CONFIG_IO_TRAPPED
+int register_trapped_io(struct trapped_io *tiop);
+int handle_trapped_io(struct pt_regs *regs, unsigned long address);
+
+void __iomem *match_trapped_io_handler(struct list_head *list,
+				       unsigned long offset,
+				       unsigned long size);
+
+#ifdef CONFIG_HAS_IOMEM
+extern struct list_head trapped_mem;
+
+static inline void __iomem *
+__ioremap_trapped(unsigned long offset, unsigned long size)
+{
+	return match_trapped_io_handler(&trapped_mem, offset, size);
+}
+#else
+#define __ioremap_trapped(offset, size) NULL
+#endif
+
+#ifdef CONFIG_HAS_IOPORT
+extern struct list_head trapped_io;
+
+static inline void __iomem *
+__ioport_map_trapped(unsigned long offset, unsigned long size)
+{
+	return match_trapped_io_handler(&trapped_io, offset, size);
+}
+#else
+#define __ioport_map_trapped(offset, size) NULL
+#endif
+
+#else
+#define register_trapped_io(tiop) (-1)
+#define handle_trapped_io(tiop, address) 0
+#define __ioremap_trapped(offset, size) NULL
+#define __ioport_map_trapped(offset, size) NULL
+#endif
+
+#endif /* __ASM_SH_IO_TRAPPED_H */
diff --git a/arch/sh/include/asm/ioctl.h b/arch/sh/include/asm/ioctl.h
new file mode 100644
index 000000000000..b279fe06dfe5
--- /dev/null
+++ b/arch/sh/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/sh/include/asm/ioctls.h b/arch/sh/include/asm/ioctls.h
new file mode 100644
index 000000000000..c212c371a4a5
--- /dev/null
+++ b/arch/sh/include/asm/ioctls.h
@@ -0,0 +1,103 @@
+#ifndef __ASM_SH_IOCTLS_H
+#define __ASM_SH_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	_IOR('f', 128, loff_t)
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+
+#define TCGETA		0x80127417	/* _IOR('t', 23, struct termio) */
+#define TCSETA		0x40127418	/* _IOW('t', 24, struct termio) */
+#define TCSETAW		0x40127419	/* _IOW('t', 25, struct termio) */
+#define TCSETAF		0x4012741C	/* _IOW('t', 28, struct termio) */
+
+#define TCSBRK		_IO('t', 29)
+#define TCXONC		_IO('t', 30)
+#define TCFLSH		_IO('t', 31)
+
+#define TIOCSWINSZ	0x40087467	/* _IOW('t', 103, struct winsize) */
+#define TIOCGWINSZ	0x80087468	/* _IOR('t', 104, struct winsize) */
+#define	TIOCSTART	_IO('t', 110)		/* start output, like ^Q */
+#define	TIOCSTOP	_IO('t', 111)		/* stop output, like ^S */
+#define TIOCOUTQ        _IOR('t', 115, int)     /* output queue size */
+
+#define TIOCSPGRP	_IOW('t', 118, int)
+#define TIOCGPGRP	_IOR('t', 119, int)
+
+#define TIOCEXCL	_IO('T', 12) /* 0x540C */
+#define TIOCNXCL	_IO('T', 13) /* 0x540D */
+#define TIOCSCTTY	_IO('T', 14) /* 0x540E */
+
+#define TIOCSTI		_IOW('T', 18, char) /* 0x5412 */
+#define TIOCMGET	_IOR('T', 21, unsigned int) /* 0x5415 */
+#define TIOCMBIS	_IOW('T', 22, unsigned int) /* 0x5416 */
+#define TIOCMBIC	_IOW('T', 23, unsigned int) /* 0x5417 */
+#define TIOCMSET	_IOW('T', 24, unsigned int) /* 0x5418 */
+# define TIOCM_LE	0x001
+# define TIOCM_DTR	0x002
+# define TIOCM_RTS	0x004
+# define TIOCM_ST	0x008
+# define TIOCM_SR	0x010
+# define TIOCM_CTS	0x020
+# define TIOCM_CAR	0x040
+# define TIOCM_RNG	0x080
+# define TIOCM_DSR	0x100
+# define TIOCM_CD	TIOCM_CAR
+# define TIOCM_RI	TIOCM_RNG
+
+#define TIOCGSOFTCAR	_IOR('T', 25, unsigned int) /* 0x5419 */
+#define TIOCSSOFTCAR	_IOW('T', 26, unsigned int) /* 0x541A */
+#define TIOCLINUX	_IOW('T', 28, char) /* 0x541C */
+#define TIOCCONS	_IO('T', 29) /* 0x541D */
+#define TIOCGSERIAL	0x803C541E	/* _IOR('T', 30, struct serial_struct) 0x541E */
+#define TIOCSSERIAL	0x403C541F	/* _IOW('T', 31, struct serial_struct) 0x541F */
+#define TIOCPKT		_IOW('T', 32, int) /* 0x5420 */
+# define TIOCPKT_DATA		 0
+# define TIOCPKT_FLUSHREAD	 1
+# define TIOCPKT_FLUSHWRITE	 2
+# define TIOCPKT_STOP		 4
+# define TIOCPKT_START		 8
+# define TIOCPKT_NOSTOP		16
+# define TIOCPKT_DOSTOP		32
+
+
+#define TIOCNOTTY	_IO('T', 34) /* 0x5422 */
+#define TIOCSETD	_IOW('T', 35, int) /* 0x5423 */
+#define TIOCGETD	_IOR('T', 36, int) /* 0x5424 */
+#define TCSBRKP		_IOW('T', 37, int) /* 0x5425 */	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	_IO('T', 39) /* 0x5427 */ /* BSD compatibility */
+#define TIOCCBRK	_IO('T', 40) /* 0x5428 */ /* BSD compatibility */
+#define TIOCGSID	_IOR('T', 41, pid_t) /* 0x5429 */ /* Return the session ID of FD */
+#define TCGETS2		_IOR('T', 42, struct termios2)
+#define TCSETS2		_IOW('T', 43, struct termios2)
+#define TCSETSW2	_IOW('T', 44, struct termios2)
+#define TCSETSF2	_IOW('T', 45, struct termios2)
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define TIOCSERCONFIG	_IO('T', 83) /* 0x5453 */
+#define TIOCSERGWILD	_IOR('T', 84,  int) /* 0x5454 */
+#define TIOCSERSWILD	_IOW('T', 85,  int) /* 0x5455 */
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x80d85458	/* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */
+#define TIOCSERGETLSR   _IOR('T', 89, unsigned int) /* 0x5459 */ /* Get line status register */
+  /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+# define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+#define TIOCSERGETMULTI 0x80A8545A	/* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config */
+#define TIOCSERSETMULTI 0x40A8545B	/* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */
+
+#define TIOCMIWAIT	_IO('T', 92) /* 0x545C */	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+
+#endif /* __ASM_SH_IOCTLS_H */
diff --git a/arch/sh/include/asm/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..5ffc9972a7ea
--- /dev/null
+++ b/arch/sh/include/asm/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __ASM_SH_IPCBUF_H__
+#define __ASM_SH_IPCBUF_H__
+
+/*
+ * The ipc64_perm structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __ASM_SH_IPCBUF_H__ */
diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h
new file mode 100644
index 000000000000..6195a531c1b0
--- /dev/null
+++ b/arch/sh/include/asm/irq.h
@@ -0,0 +1,57 @@
+#ifndef __ASM_SH_IRQ_H
+#define __ASM_SH_IRQ_H
+
+#include <asm/machvec.h>
+
+/*
+ * A sane default based on a reasonable vector table size, platforms are
+ * advised to cap this at the hard limit that they're interested in
+ * through the machvec.
+ */
+#define NR_IRQS 256
+
+/*
+ * Convert back and forth between INTEVT and IRQ values.
+ */
+#ifdef CONFIG_CPU_HAS_INTEVT
+#define evt2irq(evt)		(((evt) >> 5) - 16)
+#define irq2evt(irq)		(((irq) + 16) << 5)
+#else
+#define evt2irq(evt)		(evt)
+#define irq2evt(irq)		(irq)
+#endif
+
+/*
+ * Simple Mask Register Support
+ */
+extern void make_maskreg_irq(unsigned int irq);
+extern unsigned short *irq_mask_register;
+
+/*
+ * PINT IRQs
+ */
+void init_IRQ_pint(void);
+void make_imask_irq(unsigned int irq);
+
+static inline int generic_irq_demux(int irq)
+{
+	return irq;
+}
+
+#define irq_canonicalize(irq)	(irq)
+#define irq_demux(irq)		sh_mv.mv_irq_demux(irq)
+
+#ifdef CONFIG_IRQSTACKS
+extern void irq_ctx_init(int cpu);
+extern void irq_ctx_exit(int cpu);
+# define __ARCH_HAS_DO_SOFTIRQ
+#else
+# define irq_ctx_init(cpu) do { } while (0)
+# define irq_ctx_exit(cpu) do { } while (0)
+#endif
+
+#ifdef CONFIG_CPU_SH5
+#include <cpu/irq.h>
+#endif
+
+#endif /* __ASM_SH_IRQ_H */
diff --git a/arch/sh/include/asm/irq_regs.h b/arch/sh/include/asm/irq_regs.h
new file mode 100644
index 000000000000..3dd9c0b70270
--- /dev/null
+++ b/arch/sh/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/sh/include/asm/irqflags.h b/arch/sh/include/asm/irqflags.h
new file mode 100644
index 000000000000..46e71da5be6b
--- /dev/null
+++ b/arch/sh/include/asm/irqflags.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_SH_IRQFLAGS_H
+#define __ASM_SH_IRQFLAGS_H
+
+#ifdef CONFIG_SUPERH32
+#include "irqflags_32.h"
+#else
+#include "irqflags_64.h"
+#endif
+
+#define raw_local_save_flags(flags) \
+		do { (flags) = __raw_local_save_flags(); } while (0)
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return (flags != 0);
+}
+
+static inline int raw_irqs_disabled(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	return raw_irqs_disabled_flags(flags);
+}
+
+#define raw_local_irq_save(flags) \
+		do { (flags) = __raw_local_irq_save(); } while (0)
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	if ((flags & 0xf0) != 0xf0)
+		raw_local_irq_enable();
+}
+
+#endif /* __ASM_SH_IRQFLAGS_H */
diff --git a/arch/sh/include/asm/irqflags_32.h b/arch/sh/include/asm/irqflags_32.h
new file mode 100644
index 000000000000..60218f541340
--- /dev/null
+++ b/arch/sh/include/asm/irqflags_32.h
@@ -0,0 +1,99 @@
+#ifndef __ASM_SH_IRQFLAGS_32_H
+#define __ASM_SH_IRQFLAGS_32_H
+
+static inline void raw_local_irq_enable(void)
+{
+	unsigned long __dummy0, __dummy1;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"and	%1, %0\n\t"
+#ifdef CONFIG_CPU_HAS_SR_RB
+		"stc	r6_bank, %1\n\t"
+		"or	%1, %0\n\t"
+#endif
+		"ldc	%0, sr\n\t"
+		: "=&r" (__dummy0), "=r" (__dummy1)
+		: "1" (~0x000000f0)
+		: "memory"
+	);
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"or	#0xf0, %0\n\t"
+		"ldc	%0, sr\n\t"
+		: "=&z" (flags)
+		: /* no inputs */
+		: "memory"
+	);
+}
+
+static inline void set_bl_bit(void)
+{
+	unsigned long __dummy0, __dummy1;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"or	%2, %0\n\t"
+		"and	%3, %0\n\t"
+		"ldc	%0, sr\n\t"
+		: "=&r" (__dummy0), "=r" (__dummy1)
+		: "r" (0x10000000), "r" (0xffffff0f)
+		: "memory"
+	);
+}
+
+static inline void clear_bl_bit(void)
+{
+	unsigned long __dummy0, __dummy1;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"and	%2, %0\n\t"
+		"ldc	%0, sr\n\t"
+		: "=&r" (__dummy0), "=r" (__dummy1)
+		: "1" (~0x10000000)
+		: "memory"
+	);
+}
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"stc	sr, %0\n\t"
+		"and	#0xf0, %0\n\t"
+		: "=&z" (flags)
+		: /* no inputs */
+		: "memory"
+	);
+
+	return flags;
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags, __dummy;
+
+	__asm__ __volatile__ (
+		"stc	sr, %1\n\t"
+		"mov	%1, %0\n\t"
+		"or	#0xf0, %0\n\t"
+		"ldc	%0, sr\n\t"
+		"mov	%1, %0\n\t"
+		"and	#0xf0, %0\n\t"
+		: "=&z" (flags), "=&r" (__dummy)
+		: /* no inputs */
+		: "memory"
+	);
+
+	return flags;
+}
+
+#endif /* __ASM_SH_IRQFLAGS_32_H */
diff --git a/arch/sh/include/asm/irqflags_64.h b/arch/sh/include/asm/irqflags_64.h
new file mode 100644
index 000000000000..88f65222c1d4
--- /dev/null
+++ b/arch/sh/include/asm/irqflags_64.h
@@ -0,0 +1,85 @@
+#ifndef __ASM_SH_IRQFLAGS_64_H
+#define __ASM_SH_IRQFLAGS_64_H
+
+#include <cpu/registers.h>
+
+#define SR_MASK_LL	0x00000000000000f0LL
+#define SR_BL_LL	0x0000000010000000LL
+
+static inline void raw_local_irq_enable(void)
+{
+	unsigned long long __dummy0, __dummy1 = ~SR_MASK_LL;
+
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "and	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
+
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "or	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+}
+
+static inline void set_bl_bit(void)
+{
+	unsigned long long __dummy0, __dummy1 = SR_BL_LL;
+
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "or	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+
+}
+
+static inline void clear_bl_bit(void)
+{
+	unsigned long long __dummy0, __dummy1 = ~SR_BL_LL;
+
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "and	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy0)
+			     : "r" (__dummy1));
+}
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	unsigned long long __dummy = SR_MASK_LL;
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"getcon	" __SR ", %0\n\t"
+		"and	%0, %1, %0"
+		: "=&r" (flags)
+		: "r" (__dummy));
+
+	return flags;
+}
+
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long long __dummy0, __dummy1 = SR_MASK_LL;
+	unsigned long flags;
+
+	__asm__ __volatile__ (
+		"getcon	" __SR ", %1\n\t"
+		"or	%1, r63, %0\n\t"
+		"or	%1, %2, %1\n\t"
+		"putcon	%1, " __SR "\n\t"
+		"and	%0, %2, %0"
+		: "=&r" (flags), "=&r" (__dummy0)
+		: "r" (__dummy1));
+
+	return flags;
+}
+
+#endif /* __ASM_SH_IRQFLAGS_64_H */
diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h
new file mode 100644
index 000000000000..49cd69051a88
--- /dev/null
+++ b/arch/sh/include/asm/kdebug.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_SH_KDEBUG_H
+#define __ASM_SH_KDEBUG_H
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_TRAP,
+};
+
+#endif /* __ASM_SH_KDEBUG_H */
diff --git a/arch/sh/include/asm/kexec.h b/arch/sh/include/asm/kexec.h
new file mode 100644
index 000000000000..00f4260ef09b
--- /dev/null
+++ b/arch/sh/include/asm/kexec.h
@@ -0,0 +1,62 @@
+#ifndef __ASM_SH_KEXEC_H
+#define __ASM_SH_KEXEC_H
+
+#include <asm/ptrace.h>
+#include <asm/string.h>
+
+/*
+ * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return.
+ * I.e. Maximum page that is mapped directly into kernel memory,
+ * and kmap is not required.
+ *
+ * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct
+ * calculation for the amount of memory directly mappable into the
+ * kernel memory space.
+ */
+
+/* Maximum physical address we can use pages from */
+#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL)
+/* Maximum address we can reach in physical address mode */
+#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL)
+/* Maximum address we can use for the control code buffer */
+#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE
+
+#define KEXEC_CONTROL_CODE_SIZE	4096
+
+/* The native architecture */
+#define KEXEC_ARCH KEXEC_ARCH_SH
+
+static inline void crash_setup_regs(struct pt_regs *newregs,
+				    struct pt_regs *oldregs)
+{
+	if (oldregs)
+		memcpy(newregs, oldregs, sizeof(*newregs));
+	else {
+		__asm__ __volatile__ ("mov r0, %0" : "=r" (newregs->regs[0]));
+		__asm__ __volatile__ ("mov r1, %0" : "=r" (newregs->regs[1]));
+		__asm__ __volatile__ ("mov r2, %0" : "=r" (newregs->regs[2]));
+		__asm__ __volatile__ ("mov r3, %0" : "=r" (newregs->regs[3]));
+		__asm__ __volatile__ ("mov r4, %0" : "=r" (newregs->regs[4]));
+		__asm__ __volatile__ ("mov r5, %0" : "=r" (newregs->regs[5]));
+		__asm__ __volatile__ ("mov r6, %0" : "=r" (newregs->regs[6]));
+		__asm__ __volatile__ ("mov r7, %0" : "=r" (newregs->regs[7]));
+		__asm__ __volatile__ ("mov r8, %0" : "=r" (newregs->regs[8]));
+		__asm__ __volatile__ ("mov r9, %0" : "=r" (newregs->regs[9]));
+		__asm__ __volatile__ ("mov r10, %0" : "=r" (newregs->regs[10]));
+		__asm__ __volatile__ ("mov r11, %0" : "=r" (newregs->regs[11]));
+		__asm__ __volatile__ ("mov r12, %0" : "=r" (newregs->regs[12]));
+		__asm__ __volatile__ ("mov r13, %0" : "=r" (newregs->regs[13]));
+		__asm__ __volatile__ ("mov r14, %0" : "=r" (newregs->regs[14]));
+		__asm__ __volatile__ ("mov r15, %0" : "=r" (newregs->regs[15]));
+
+		__asm__ __volatile__ ("sts pr, %0" : "=r" (newregs->pr));
+		__asm__ __volatile__ ("sts macl, %0" : "=r" (newregs->macl));
+		__asm__ __volatile__ ("sts mach, %0" : "=r" (newregs->mach));
+
+		__asm__ __volatile__ ("stc gbr, %0" : "=r" (newregs->gbr));
+		__asm__ __volatile__ ("stc sr, %0" : "=r" (newregs->sr));
+
+		newregs->pc = (unsigned long)current_text_addr();
+	}
+}
+#endif /* __ASM_SH_KEXEC_H */
diff --git a/arch/sh/include/asm/kgdb.h b/arch/sh/include/asm/kgdb.h
new file mode 100644
index 000000000000..24e42078f36f
--- /dev/null
+++ b/arch/sh/include/asm/kgdb.h
@@ -0,0 +1,69 @@
+/*
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Based on original code by Glenn Engel, Jim Kingdon,
+ * David Grothe <dave@gcom.com>, Tigran Aivazian, <tigran@sco.com> and
+ * Amit S. Kale <akale@veritas.com>
+ * 
+ * Super-H port based on sh-stub.c (Ben Lee and Steve Chamberlain) by
+ * Henry Bell <henry.bell@st.com>
+ * 
+ * Header file for low-level support for remote debug using GDB. 
+ *
+ */
+
+#ifndef __KGDB_H
+#define __KGDB_H
+
+#include <asm/ptrace.h>
+
+/* Same as pt_regs but has vbr in place of syscall_nr */
+struct kgdb_regs {
+        unsigned long regs[16];
+        unsigned long pc;
+        unsigned long pr;
+        unsigned long sr;
+        unsigned long gbr;
+        unsigned long mach;
+        unsigned long macl;
+        unsigned long vbr;
+};
+
+/* State info */
+extern char kgdb_in_gdb_mode;
+extern int kgdb_nofault;	/* Ignore bus errors (in gdb mem access) */
+extern char in_nmi;		/* Debounce flag to prevent NMI reentry*/
+
+/* SCI */
+extern int kgdb_portnum;
+extern int kgdb_baud;
+extern char kgdb_parity;
+extern char kgdb_bits;
+
+/* Init and interface stuff */
+extern int kgdb_init(void);
+extern int (*kgdb_getchar)(void);
+extern void (*kgdb_putchar)(int);
+
+/* Trap functions */
+typedef void (kgdb_debug_hook_t)(struct pt_regs *regs);
+typedef void (kgdb_bus_error_hook_t)(void);
+extern kgdb_debug_hook_t  *kgdb_debug_hook;
+extern kgdb_bus_error_hook_t *kgdb_bus_err_hook;
+
+/* Console */
+struct console;
+void kgdb_console_write(struct console *co, const char *s, unsigned count);
+extern int kgdb_console_setup(struct console *, char *);
+
+/* Prototypes for jmp fns */
+#define _JBLEN 9
+typedef        int jmp_buf[_JBLEN];
+extern void    longjmp(jmp_buf __jmpb, int __retval);
+extern int     setjmp(jmp_buf __jmpb);
+
+/* Forced breakpoint */
+#define breakpoint()	__asm__ __volatile__("trapa   #0x3c")
+
+#endif
diff --git a/arch/sh/include/asm/kmap_types.h b/arch/sh/include/asm/kmap_types.h
new file mode 100644
index 000000000000..84d565c696be
--- /dev/null
+++ b/arch/sh/include/asm/kmap_types.h
@@ -0,0 +1,32 @@
+#ifndef __SH_KMAP_TYPES_H
+#define __SH_KMAP_TYPES_H
+
+/* Dummy header just to define km_type. */
+
+
+#ifdef CONFIG_DEBUG_HIGHMEM
+# define D(n) __KM_FENCE_##n ,
+#else
+# define D(n)
+#endif
+
+enum km_type {
+D(0)	KM_BOUNCE_READ,
+D(1)	KM_SKB_SUNRPC_DATA,
+D(2)	KM_SKB_DATA_SOFTIRQ,
+D(3)	KM_USER0,
+D(4)	KM_USER1,
+D(5)	KM_BIO_SRC_IRQ,
+D(6)	KM_BIO_DST_IRQ,
+D(7)	KM_PTE0,
+D(8)	KM_PTE1,
+D(9)	KM_IRQ0,
+D(10)	KM_IRQ1,
+D(11)	KM_SOFTIRQ0,
+D(12)	KM_SOFTIRQ1,
+D(13)	KM_TYPE_NR
+};
+
+#undef D
+
+#endif
diff --git a/arch/sh/include/asm/lboxre2.h b/arch/sh/include/asm/lboxre2.h
new file mode 100644
index 000000000000..e6d160504923
--- /dev/null
+++ b/arch/sh/include/asm/lboxre2.h
@@ -0,0 +1,27 @@
+#ifndef __ASM_SH_LBOXRE2_H
+#define __ASM_SH_LBOXRE2_H
+
+/*
+ * Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * NTT COMWARE L-BOX RE2 support
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#define IRQ_CF1		9	/* CF1 */
+#define IRQ_CF0		10	/* CF0 */
+#define IRQ_INTD	11	/* INTD */
+#define IRQ_ETH1	12	/* Ether1 */
+#define IRQ_ETH0	13	/* Ether0 */
+#define IRQ_INTA	14	/* INTA */
+
+void init_lboxre2_IRQ(void);
+
+#define __IO_PREFIX	lboxre2
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_LBOXRE2_H */
diff --git a/arch/sh/include/asm/linkage.h b/arch/sh/include/asm/linkage.h
new file mode 100644
index 000000000000..3565a4f4009f
--- /dev/null
+++ b/arch/sh/include/asm/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .balign 4
+#define __ALIGN_STR ".balign 4"
+
+#endif
diff --git a/arch/sh/include/asm/local.h b/arch/sh/include/asm/local.h
new file mode 100644
index 000000000000..9ed9b9cb459a
--- /dev/null
+++ b/arch/sh/include/asm/local.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_SH_LOCAL_H
+#define __ASM_SH_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* __ASM_SH_LOCAL_H */
+
diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h
new file mode 100644
index 000000000000..b2e4124070ae
--- /dev/null
+++ b/arch/sh/include/asm/machvec.h
@@ -0,0 +1,70 @@
+/*
+ * include/asm-sh/machvec.h
+ *
+ * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+
+#ifndef _ASM_SH_MACHVEC_H
+#define _ASM_SH_MACHVEC_H
+
+#include <linux/types.h>
+#include <linux/time.h>
+#include <asm/machtypes.h>
+
+struct device;
+
+struct sh_machine_vector {
+	void (*mv_setup)(char **cmdline_p);
+	const char *mv_name;
+	int mv_nr_irqs;
+
+	u8 (*mv_inb)(unsigned long);
+	u16 (*mv_inw)(unsigned long);
+	u32 (*mv_inl)(unsigned long);
+	void (*mv_outb)(u8, unsigned long);
+	void (*mv_outw)(u16, unsigned long);
+	void (*mv_outl)(u32, unsigned long);
+
+	u8 (*mv_inb_p)(unsigned long);
+	u16 (*mv_inw_p)(unsigned long);
+	u32 (*mv_inl_p)(unsigned long);
+	void (*mv_outb_p)(u8, unsigned long);
+	void (*mv_outw_p)(u16, unsigned long);
+	void (*mv_outl_p)(u32, unsigned long);
+
+	void (*mv_insb)(unsigned long, void *dst, unsigned long count);
+	void (*mv_insw)(unsigned long, void *dst, unsigned long count);
+	void (*mv_insl)(unsigned long, void *dst, unsigned long count);
+	void (*mv_outsb)(unsigned long, const void *src, unsigned long count);
+	void (*mv_outsw)(unsigned long, const void *src, unsigned long count);
+	void (*mv_outsl)(unsigned long, const void *src, unsigned long count);
+
+	u8 (*mv_readb)(void __iomem *);
+	u16 (*mv_readw)(void __iomem *);
+	u32 (*mv_readl)(void __iomem *);
+	void (*mv_writeb)(u8, void __iomem *);
+	void (*mv_writew)(u16, void __iomem *);
+	void (*mv_writel)(u32, void __iomem *);
+
+	int (*mv_irq_demux)(int irq);
+
+	void (*mv_init_irq)(void);
+	void (*mv_init_pci)(void);
+
+	void (*mv_heartbeat)(void);
+
+	void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size);
+	void (*mv_ioport_unmap)(void __iomem *);
+};
+
+extern struct sh_machine_vector sh_mv;
+
+#define get_system_type()	sh_mv.mv_name
+
+#define __initmv \
+	__used __section(.machvec.init)
+
+#endif /* _ASM_SH_MACHVEC_H */
diff --git a/arch/sh/include/asm/magicpanelr2.h b/arch/sh/include/asm/magicpanelr2.h
new file mode 100644
index 000000000000..c644a77ee357
--- /dev/null
+++ b/arch/sh/include/asm/magicpanelr2.h
@@ -0,0 +1,67 @@
+/*
+ *  include/asm-sh/magicpanelr2.h
+ *
+ *  Copyright (C) 2007  Markus Brunner, Mark Jonas
+ *
+ *  I/O addresses and bitmasks for Magic Panel Release 2 board
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_SH_MAGICPANELR2_H
+#define __ASM_SH_MAGICPANELR2_H
+
+#include <asm/gpio.h>
+
+#define __IO_PREFIX mpr2
+#include <asm/io_generic.h>
+
+
+#define SETBITS_OUTB(mask, reg)   ctrl_outb(ctrl_inb(reg) | mask, reg)
+#define SETBITS_OUTW(mask, reg)   ctrl_outw(ctrl_inw(reg) | mask, reg)
+#define SETBITS_OUTL(mask, reg)   ctrl_outl(ctrl_inl(reg) | mask, reg)
+#define CLRBITS_OUTB(mask, reg)   ctrl_outb(ctrl_inb(reg) & ~mask, reg)
+#define CLRBITS_OUTW(mask, reg)   ctrl_outw(ctrl_inw(reg) & ~mask, reg)
+#define CLRBITS_OUTL(mask, reg)   ctrl_outl(ctrl_inl(reg) & ~mask, reg)
+
+
+#define PA_LED          PORT_PADR      /* LED */
+
+
+/* BSC */
+#define CMNCR           0xA4FD0000UL
+#define CS0BCR          0xA4FD0004UL
+#define CS2BCR          0xA4FD0008UL
+#define CS3BCR          0xA4FD000CUL
+#define CS4BCR          0xA4FD0010UL
+#define CS5ABCR         0xA4FD0014UL
+#define CS5BBCR         0xA4FD0018UL
+#define CS6ABCR         0xA4FD001CUL
+#define CS6BBCR         0xA4FD0020UL
+#define CS0WCR          0xA4FD0024UL
+#define CS2WCR          0xA4FD0028UL
+#define CS3WCR          0xA4FD002CUL
+#define CS4WCR          0xA4FD0030UL
+#define CS5AWCR         0xA4FD0034UL
+#define CS5BWCR         0xA4FD0038UL
+#define CS6AWCR         0xA4FD003CUL
+#define CS6BWCR         0xA4FD0040UL
+
+
+/* usb */
+
+#define PORT_UTRCTL		0xA405012CUL
+#define PORT_UCLKCR_W		0xA40A0008UL
+
+#define INTC_ICR0		0xA414FEE0UL
+#define INTC_ICR1		0xA4140010UL
+#define INTC_ICR2		0xA4140012UL
+
+/* MTD */
+
+#define MPR2_MTD_BOOTLOADER_SIZE	0x00060000UL
+#define MPR2_MTD_KERNEL_SIZE		0x00200000UL
+
+#endif  /* __ASM_SH_MAGICPANELR2_H */
diff --git a/arch/sh/include/asm/mc146818rtc.h b/arch/sh/include/asm/mc146818rtc.h
new file mode 100644
index 000000000000..0aee96a97330
--- /dev/null
+++ b/arch/sh/include/asm/mc146818rtc.h
@@ -0,0 +1,7 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/arch/sh/include/asm/microdev.h b/arch/sh/include/asm/microdev.h
new file mode 100644
index 000000000000..1aed15856e11
--- /dev/null
+++ b/arch/sh/include/asm/microdev.h
@@ -0,0 +1,80 @@
+/*
+ * linux/include/asm-sh/microdev.h
+ *
+ * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
+ *
+ * Definitions for the SuperH SH4-202 MicroDev board.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ */
+#ifndef __ASM_SH_MICRODEV_H
+#define __ASM_SH_MICRODEV_H
+
+extern void init_microdev_irq(void);
+extern void microdev_print_fpga_intc_status(void);
+
+/*
+ * The following are useful macros for manipulating the interrupt
+ * controller (INTC) on the CPU-board FPGA.  should be noted that there
+ * is an INTC on the FPGA, and a separate INTC on the SH4-202 core -
+ * these are two different things, both of which need to be prorammed to
+ * correctly route - unfortunately, they have the same name and
+ * abbreviations!
+ */
+#define	MICRODEV_FPGA_INTC_BASE		0xa6110000ul				/* INTC base address on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTENB_REG	(MICRODEV_FPGA_INTC_BASE+0ul)		/* Interrupt Enable Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTDSB_REG	(MICRODEV_FPGA_INTC_BASE+8ul)		/* Interrupt Disable Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTC_MASK(n)	(1ul<<(n))				/* Interrupt mask to enable/disable INTC in CPU-board FPGA */
+#define	MICRODEV_FPGA_INTPRI_REG(n)	(MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTPRI_LEVEL(n,x)	((x)<<(((n)%8)*4))			/* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */
+#define	MICRODEV_FPGA_INTPRI_MASK(n)	(MICRODEV_FPGA_INTPRI_LEVEL((n),0xful))	/* Interrupt Priority Mask on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTSRC_REG	(MICRODEV_FPGA_INTC_BASE+0x30ul)	/* Interrupt Source Register on INTC on CPU-board FPGA */
+#define	MICRODEV_FPGA_INTREQ_REG	(MICRODEV_FPGA_INTC_BASE+0x38ul)	/* Interrupt Request Register on INTC on CPU-board FPGA */
+
+
+/*
+ * The following are the IRQ numbers for the Linux Kernel for external
+ * interrupts.  i.e. the numbers seen by 'cat /proc/interrupt'.
+ */
+#define MICRODEV_LINUX_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
+#define MICRODEV_LINUX_IRQ_SERIAL1	 2	/* SuperIO Serial #1 */
+#define MICRODEV_LINUX_IRQ_ETHERNET	 3	/* on-board Ethnernet */
+#define MICRODEV_LINUX_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
+#define MICRODEV_LINUX_IRQ_USB_HC	 7	/* on-board USB HC */
+#define MICRODEV_LINUX_IRQ_MOUSE	12	/* SuperIO PS/2 Mouse */
+#define MICRODEV_LINUX_IRQ_IDE2		13	/* SuperIO IDE #2 */
+#define MICRODEV_LINUX_IRQ_IDE1		14	/* SuperIO IDE #1 */
+
+/*
+ * The following are the IRQ numbers for the INTC on the FPGA for
+ * external interrupts.  i.e. the bits in the INTC registers in the
+ * FPGA.
+ */
+#define MICRODEV_FPGA_IRQ_KEYBOARD	 1	/* SuperIO Keyboard */
+#define MICRODEV_FPGA_IRQ_SERIAL1	 3	/* SuperIO Serial #1 */
+#define MICRODEV_FPGA_IRQ_SERIAL2	 4	/* SuperIO Serial #2 */
+#define MICRODEV_FPGA_IRQ_MOUSE		12	/* SuperIO PS/2 Mouse */
+#define MICRODEV_FPGA_IRQ_IDE1		14	/* SuperIO IDE #1 */
+#define MICRODEV_FPGA_IRQ_IDE2		15	/* SuperIO IDE #2 */
+#define MICRODEV_FPGA_IRQ_USB_HC	16	/* on-board USB HC */
+#define MICRODEV_FPGA_IRQ_ETHERNET	18	/* on-board Ethnernet */
+
+#define MICRODEV_IRQ_PCI_INTA		 8
+#define MICRODEV_IRQ_PCI_INTB		 9
+#define MICRODEV_IRQ_PCI_INTC		10
+#define MICRODEV_IRQ_PCI_INTD		11
+
+#define __IO_PREFIX microdev
+#include <asm/io_generic.h>
+
+#if defined(CONFIG_PCI)
+unsigned char  microdev_pci_inb(unsigned long port);
+unsigned short microdev_pci_inw(unsigned long port);
+unsigned long  microdev_pci_inl(unsigned long port);
+void           microdev_pci_outb(unsigned char  data, unsigned long port);
+void           microdev_pci_outw(unsigned short data, unsigned long port);
+void           microdev_pci_outl(unsigned long  data, unsigned long port);
+#endif
+
+#endif /* __ASM_SH_MICRODEV_H */
diff --git a/arch/sh/include/asm/migor.h b/arch/sh/include/asm/migor.h
new file mode 100644
index 000000000000..10016e0f4a4e
--- /dev/null
+++ b/arch/sh/include/asm/migor.h
@@ -0,0 +1,65 @@
+#ifndef __ASM_SH_MIGOR_H
+#define __ASM_SH_MIGOR_H
+
+/*
+ * linux/include/asm-sh/migor.h
+ *
+ * Copyright (C) 2008 Renesas Solutions
+ *
+ * Portions Copyright (C) 2007 Nobuhiro Iwamatsu
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <asm/addrspace.h>
+
+/* GPIO */
+#define PORT_PACR 0xa4050100
+#define PORT_PDCR 0xa4050106
+#define PORT_PECR 0xa4050108
+#define PORT_PHCR 0xa405010e
+#define PORT_PJCR 0xa4050110
+#define PORT_PKCR 0xa4050112
+#define PORT_PLCR 0xa4050114
+#define PORT_PMCR 0xa4050116
+#define PORT_PRCR 0xa405011c
+#define PORT_PTCR 0xa4050140
+#define PORT_PUCR 0xa4050142
+#define PORT_PVCR 0xa4050144
+#define PORT_PWCR 0xa4050146
+#define PORT_PXCR 0xa4050148
+#define PORT_PYCR 0xa405014a
+#define PORT_PZCR 0xa405014c
+#define PORT_PADR 0xa4050120
+#define PORT_PHDR 0xa405012e
+#define PORT_PTDR 0xa4050160
+#define PORT_PWDR 0xa4050166
+
+#define PORT_HIZCRA 0xa4050158
+#define PORT_HIZCRC 0xa405015c
+
+#define PORT_MSELCRB 0xa4050182
+
+#define MSTPCR1 0xa4150034
+#define MSTPCR2 0xa4150038
+
+#define PORT_PSELA 0xa405014e
+#define PORT_PSELB 0xa4050150
+#define PORT_PSELC 0xa4050152
+#define PORT_PSELD 0xa4050154
+#define PORT_PSELE 0xa4050156
+
+#define PORT_HIZCRA 0xa4050158
+#define PORT_HIZCRB 0xa405015a
+#define PORT_HIZCRC 0xa405015c
+
+#define BSC_CS6ABCR 0xfec1001c
+
+#include <asm/sh_mobile_lcdc.h>
+
+int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle,
+			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+
+#endif /* __ASM_SH_MIGOR_H */
diff --git a/arch/sh/include/asm/mman.h b/arch/sh/include/asm/mman.h
new file mode 100644
index 000000000000..156eb0225cf6
--- /dev/null
+++ b/arch/sh/include/asm/mman.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_SH_MMAN_H
+#define __ASM_SH_MMAN_H
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+#define MAP_POPULATE	0x8000		/* populate (prefault) page tables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#endif /* __ASM_SH_MMAN_H */
diff --git a/arch/sh/include/asm/mmu.h b/arch/sh/include/asm/mmu.h
new file mode 100644
index 000000000000..fdcb93bc6d11
--- /dev/null
+++ b/arch/sh/include/asm/mmu.h
@@ -0,0 +1,76 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_id_t[NR_CPUS];
+
+typedef struct {
+#ifdef CONFIG_MMU
+	mm_context_id_t		id;
+	void			*vdso;
+#else
+	struct vm_list_struct	*vmlist;
+	unsigned long		end_brk;
+#endif
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	unsigned long		exec_fdpic_loadmap;
+	unsigned long		interp_fdpic_loadmap;
+#endif
+} mm_context_t;
+
+/*
+ * Privileged Space Mapping Buffer (PMB) definitions
+ */
+#define PMB_PASCR		0xff000070
+#define PMB_IRMCR		0xff000078
+
+#define PMB_ADDR		0xf6100000
+#define PMB_DATA		0xf7100000
+#define PMB_ENTRY_MAX		16
+#define PMB_E_MASK		0x0000000f
+#define PMB_E_SHIFT		8
+
+#define PMB_SZ_16M		0x00000000
+#define PMB_SZ_64M		0x00000010
+#define PMB_SZ_128M		0x00000080
+#define PMB_SZ_512M		0x00000090
+#define PMB_SZ_MASK		PMB_SZ_512M
+#define PMB_C			0x00000008
+#define PMB_WT			0x00000001
+#define PMB_UB			0x00000200
+#define PMB_V			0x00000100
+
+#define PMB_NO_ENTRY		(-1)
+
+struct pmb_entry;
+
+struct pmb_entry {
+	unsigned long vpn;
+	unsigned long ppn;
+	unsigned long flags;
+
+	/*
+	 * 0 .. NR_PMB_ENTRIES for specific entry selection, or
+	 * PMB_NO_ENTRY to search for a free one
+	 */
+	int entry;
+
+	struct pmb_entry *next;
+	/* Adjacent entry link for contiguous multi-entry mappings */
+	struct pmb_entry *link;
+};
+
+/* arch/sh/mm/pmb.c */
+int __set_pmb_entry(unsigned long vpn, unsigned long ppn,
+		    unsigned long flags, int *entry);
+int set_pmb_entry(struct pmb_entry *pmbe);
+void clear_pmb_entry(struct pmb_entry *pmbe);
+struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn,
+			    unsigned long flags);
+void pmb_free(struct pmb_entry *pmbe);
+long pmb_remap(unsigned long virt, unsigned long phys,
+	       unsigned long size, unsigned long flags);
+void pmb_unmap(unsigned long addr);
+
+#endif /* __MMU_H */
+
diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h
new file mode 100644
index 000000000000..04c0c9733ad6
--- /dev/null
+++ b/arch/sh/include/asm/mmu_context.h
@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 - 2007 Paul Mundt
+ *
+ * ASID handling idea taken from MIPS implementation.
+ */
+#ifndef __ASM_SH_MMU_CONTEXT_H
+#define __ASM_SH_MMU_CONTEXT_H
+
+#ifdef __KERNEL__
+#include <cpu/mmu_context.h>
+#include <asm/tlbflush.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm-generic/mm_hooks.h>
+
+/*
+ * The MMU "context" consists of two things:
+ *    (a) TLB cache version (or round, cycle whatever expression you like)
+ *    (b) ASID (Address Space IDentifier)
+ */
+#define MMU_CONTEXT_ASID_MASK		0x000000ff
+#define MMU_CONTEXT_VERSION_MASK	0xffffff00
+#define MMU_CONTEXT_FIRST_VERSION	0x00000100
+#define NO_CONTEXT			0
+
+/* ASID is 8-bit value, so it can't be 0x100 */
+#define MMU_NO_ASID			0x100
+
+#define asid_cache(cpu)		(cpu_data[cpu].asid_cache)
+
+#ifdef CONFIG_MMU
+#define cpu_context(cpu, mm)	((mm)->context.id[cpu])
+
+#define cpu_asid(cpu, mm)	\
+	(cpu_context((cpu), (mm)) & MMU_CONTEXT_ASID_MASK)
+
+/*
+ * Virtual Page Number mask
+ */
+#define MMU_VPN_MASK	0xfffff000
+
+#if defined(CONFIG_SUPERH32)
+#include "mmu_context_32.h"
+#else
+#include "mmu_context_64.h"
+#endif
+
+/*
+ * Get MMU context if needed.
+ */
+static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu)
+{
+	unsigned long asid = asid_cache(cpu);
+
+	/* Check if we have old version of context. */
+	if (((cpu_context(cpu, mm) ^ asid) & MMU_CONTEXT_VERSION_MASK) == 0)
+		/* It's up to date, do nothing */
+		return;
+
+	/* It's old, we need to get new context with new version. */
+	if (!(++asid & MMU_CONTEXT_ASID_MASK)) {
+		/*
+		 * We exhaust ASID of this version.
+		 * Flush all TLB and start new cycle.
+		 */
+		flush_tlb_all();
+
+#ifdef CONFIG_SUPERH64
+		/*
+		 * The SH-5 cache uses the ASIDs, requiring both the I and D
+		 * cache to be flushed when the ASID is exhausted. Weak.
+		 */
+		flush_cache_all();
+#endif
+
+		/*
+		 * Fix version; Note that we avoid version #0
+		 * to distingush NO_CONTEXT.
+		 */
+		if (!asid)
+			asid = MMU_CONTEXT_FIRST_VERSION;
+	}
+
+	cpu_context(cpu, mm) = asid_cache(cpu) = asid;
+}
+
+/*
+ * Initialize the context related info for a new mm_struct
+ * instance.
+ */
+static inline int init_new_context(struct task_struct *tsk,
+				   struct mm_struct *mm)
+{
+	int i;
+
+	for (i = 0; i < num_online_cpus(); i++)
+		cpu_context(i, mm) = NO_CONTEXT;
+
+	return 0;
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+static inline void activate_context(struct mm_struct *mm, unsigned int cpu)
+{
+	get_mmu_context(mm, cpu);
+	set_asid(cpu_asid(cpu, mm));
+}
+
+static inline void switch_mm(struct mm_struct *prev,
+			     struct mm_struct *next,
+			     struct task_struct *tsk)
+{
+	unsigned int cpu = smp_processor_id();
+
+	if (likely(prev != next)) {
+		cpu_set(cpu, next->cpu_vm_mask);
+		set_TTB(next->pgd);
+		activate_context(next, cpu);
+	} else
+		if (!cpu_test_and_set(cpu, next->cpu_vm_mask))
+			activate_context(next, cpu);
+}
+#else
+#define get_mmu_context(mm)		do { } while (0)
+#define init_new_context(tsk,mm)	(0)
+#define destroy_context(mm)		do { } while (0)
+#define set_asid(asid)			do { } while (0)
+#define get_asid()			(0)
+#define cpu_asid(cpu, mm)		({ (void)cpu; 0; })
+#define switch_and_save_asid(asid)	(0)
+#define set_TTB(pgd)			do { } while (0)
+#define get_TTB()			(0)
+#define activate_context(mm,cpu)	do { } while (0)
+#define switch_mm(prev,next,tsk)	do { } while (0)
+#endif /* CONFIG_MMU */
+
+#define activate_mm(prev, next)		switch_mm((prev),(next),NULL)
+#define deactivate_mm(tsk,mm)		do { } while (0)
+#define enter_lazy_tlb(mm,tsk)		do { } while (0)
+
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4)
+/*
+ * If this processor has an MMU, we need methods to turn it off/on ..
+ * paging_init() will also have to be updated for the processor in
+ * question.
+ */
+static inline void enable_mmu(void)
+{
+	unsigned int cpu = smp_processor_id();
+
+	/* Enable MMU */
+	ctrl_outl(MMU_CONTROL_INIT, MMUCR);
+	ctrl_barrier();
+
+	if (asid_cache(cpu) == NO_CONTEXT)
+		asid_cache(cpu) = MMU_CONTEXT_FIRST_VERSION;
+
+	set_asid(asid_cache(cpu) & MMU_CONTEXT_ASID_MASK);
+}
+
+static inline void disable_mmu(void)
+{
+	unsigned long cr;
+
+	cr = ctrl_inl(MMUCR);
+	cr &= ~MMU_CONTROL_INIT;
+	ctrl_outl(cr, MMUCR);
+
+	ctrl_barrier();
+}
+#else
+/*
+ * MMU control handlers for processors lacking memory
+ * management hardware.
+ */
+#define enable_mmu()	do { } while (0)
+#define disable_mmu()	do { } while (0)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_MMU_CONTEXT_H */
diff --git a/arch/sh/include/asm/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h
new file mode 100644
index 000000000000..f4f9aebd68b7
--- /dev/null
+++ b/arch/sh/include/asm/mmu_context_32.h
@@ -0,0 +1,47 @@
+#ifndef __ASM_SH_MMU_CONTEXT_32_H
+#define __ASM_SH_MMU_CONTEXT_32_H
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	/* Do nothing */
+}
+
+static inline void set_asid(unsigned long asid)
+{
+	unsigned long __dummy;
+
+	__asm__ __volatile__ ("mov.l	%2, %0\n\t"
+			      "and	%3, %0\n\t"
+			      "or	%1, %0\n\t"
+			      "mov.l	%0, %2"
+			      : "=&r" (__dummy)
+			      : "r" (asid), "m" (__m(MMU_PTEH)),
+			        "r" (0xffffff00));
+}
+
+static inline unsigned long get_asid(void)
+{
+	unsigned long asid;
+
+	__asm__ __volatile__ ("mov.l	%1, %0"
+			      : "=r" (asid)
+			      : "m" (__m(MMU_PTEH)));
+	asid &= MMU_CONTEXT_ASID_MASK;
+	return asid;
+}
+
+/* MMU_TTB is used for optimizing the fault handling. */
+static inline void set_TTB(pgd_t *pgd)
+{
+	ctrl_outl((unsigned long)pgd, MMU_TTB);
+}
+
+static inline pgd_t *get_TTB(void)
+{
+	return (pgd_t *)ctrl_inl(MMU_TTB);
+}
+#endif /* __ASM_SH_MMU_CONTEXT_32_H */
diff --git a/arch/sh/include/asm/mmu_context_64.h b/arch/sh/include/asm/mmu_context_64.h
new file mode 100644
index 000000000000..de121025d87f
--- /dev/null
+++ b/arch/sh/include/asm/mmu_context_64.h
@@ -0,0 +1,78 @@
+#ifndef __ASM_SH_MMU_CONTEXT_64_H
+#define __ASM_SH_MMU_CONTEXT_64_H
+
+/*
+ * sh64-specific mmu_context interface.
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003 - 2007  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <cpu/registers.h>
+#include <asm/cacheflush.h>
+
+#define SR_ASID_MASK		0xffffffffff00ffffULL
+#define SR_ASID_SHIFT		16
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+	/* Well, at least free TLB entries */
+	flush_tlb_mm(mm);
+}
+
+static inline unsigned long get_asid(void)
+{
+	unsigned long long sr;
+
+	asm volatile ("getcon   " __SR ", %0\n\t"
+		      : "=r" (sr));
+
+	sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK;
+	return (unsigned long) sr;
+}
+
+/* Set ASID into SR */
+static inline void set_asid(unsigned long asid)
+{
+	unsigned long long sr, pc;
+
+	asm volatile ("getcon	" __SR ", %0" : "=r" (sr));
+
+	sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT);
+
+	/*
+	 * It is possible that this function may be inlined and so to avoid
+	 * the assembler reporting duplicate symbols we make use of the
+	 * gas trick of generating symbols using numerics and forward
+	 * reference.
+	 */
+	asm volatile ("movi	1, %1\n\t"
+		      "shlli	%1, 28, %1\n\t"
+		      "or	%0, %1, %1\n\t"
+		      "putcon	%1, " __SR "\n\t"
+		      "putcon	%0, " __SSR "\n\t"
+		      "movi	1f, %1\n\t"
+		      "ori	%1, 1 , %1\n\t"
+		      "putcon	%1, " __SPC "\n\t"
+		      "rte\n"
+		      "1:\n\t"
+		      : "=r" (sr), "=r" (pc) : "0" (sr));
+}
+
+/* arch/sh/kernel/cpu/sh5/entry.S */
+extern unsigned long switch_and_save_asid(unsigned long new_asid);
+
+/* No spare register to twiddle, so use a software cache */
+extern pgd_t *mmu_pdtp_cache;
+
+#define set_TTB(pgd)	(mmu_pdtp_cache = (pgd))
+#define get_TTB()	(mmu_pdtp_cache)
+
+#endif /* __ASM_SH_MMU_CONTEXT_64_H */
diff --git a/arch/sh/include/asm/mmzone.h b/arch/sh/include/asm/mmzone.h
new file mode 100644
index 000000000000..2969253c4042
--- /dev/null
+++ b/arch/sh/include/asm/mmzone.h
@@ -0,0 +1,48 @@
+#ifndef __ASM_SH_MMZONE_H
+#define __ASM_SH_MMZONE_H
+
+#ifdef __KERNEL__
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+extern struct pglist_data *node_data[];
+#define NODE_DATA(nid)		(node_data[nid])
+
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)	(NODE_DATA(nid)->node_start_pfn + \
+				 NODE_DATA(nid)->node_spanned_pages)
+
+static inline int pfn_to_nid(unsigned long pfn)
+{
+	int nid;
+
+	for (nid = 0; nid < MAX_NUMNODES; nid++)
+		if (pfn >= node_start_pfn(nid) && pfn <= node_end_pfn(nid))
+			break;
+
+	return nid;
+}
+
+static inline struct pglist_data *pfn_to_pgdat(unsigned long pfn)
+{
+	return NODE_DATA(pfn_to_nid(pfn));
+}
+
+/* arch/sh/mm/numa.c */
+void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end);
+#else
+static inline void
+setup_bootmem_node(int nid, unsigned long start, unsigned long end)
+{
+}
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
+
+/* Platform specific mem init */
+void __init plat_mem_setup(void);
+
+/* arch/sh/kernel/setup.c */
+void __init setup_bootmem_allocator(unsigned long start_pfn);
+void __init __add_active_range(unsigned int nid, unsigned long start_pfn,
+			       unsigned long end_pfn);
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_MMZONE_H */
diff --git a/arch/sh/include/asm/module.h b/arch/sh/include/asm/module.h
new file mode 100644
index 000000000000..46eccd331660
--- /dev/null
+++ b/arch/sh/include/asm/module.h
@@ -0,0 +1,44 @@
+#ifndef _ASM_SH_MODULE_H
+#define _ASM_SH_MODULE_H
+
+/*
+ * This file contains the SH architecture specific module code.
+ */
+
+struct mod_arch_specific {
+	/* Nothing to see here .. */
+};
+
+#define Elf_Shdr		Elf32_Shdr
+#define Elf_Sym			Elf32_Sym
+#define Elf_Ehdr		Elf32_Ehdr
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# ifdef CONFIG_CPU_SH2
+#  define MODULE_PROC_FAMILY "SH2LE "
+# elif defined  CONFIG_CPU_SH3
+#  define MODULE_PROC_FAMILY "SH3LE "
+# elif defined  CONFIG_CPU_SH4
+#  define MODULE_PROC_FAMILY "SH4LE "
+# elif defined  CONFIG_CPU_SH5
+#  define MODULE_PROC_FAMILY "SH5LE "
+# else
+#  error unknown processor family
+# endif
+#else
+# ifdef CONFIG_CPU_SH2
+#  define MODULE_PROC_FAMILY "SH2BE "
+# elif defined  CONFIG_CPU_SH3
+#  define MODULE_PROC_FAMILY "SH3BE "
+# elif defined  CONFIG_CPU_SH4
+#  define MODULE_PROC_FAMILY "SH4BE "
+# elif defined  CONFIG_CPU_SH5
+#  define MODULE_PROC_FAMILY "SH5BE "
+# else
+#  error unknown processor family
+# endif
+#endif
+
+#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
+
+#endif /* _ASM_SH_MODULE_H */
diff --git a/arch/sh/include/asm/msgbuf.h b/arch/sh/include/asm/msgbuf.h
new file mode 100644
index 000000000000..517432343fb5
--- /dev/null
+++ b/arch/sh/include/asm/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef __ASM_SH_MSGBUF_H
+#define __ASM_SH_MSGBUF_H
+
+/* 
+ * The msqid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* __ASM_SH_MSGBUF_H */
diff --git a/arch/sh/include/asm/mutex.h b/arch/sh/include/asm/mutex.h
new file mode 100644
index 000000000000..458c1f7fbc18
--- /dev/null
+++ b/arch/sh/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
new file mode 100644
index 000000000000..77fb8bf02e4e
--- /dev/null
+++ b/arch/sh/include/asm/page.h
@@ -0,0 +1,183 @@
+#ifndef __ASM_SH_PAGE_H
+#define __ASM_SH_PAGE_H
+
+/*
+ * Copyright (C) 1999  Niibe Yutaka
+ */
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#if defined(CONFIG_PAGE_SIZE_4KB)
+# define PAGE_SHIFT	12
+#elif defined(CONFIG_PAGE_SIZE_8KB)
+# define PAGE_SHIFT	13
+#elif defined(CONFIG_PAGE_SIZE_16KB)
+# define PAGE_SHIFT	14
+#elif defined(CONFIG_PAGE_SIZE_64KB)
+# define PAGE_SHIFT	16
+#else
+# error "Bogus kernel page size?"
+#endif
+
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
+#define PAGE_MASK	(~(PAGE_SIZE-1))
+#define PTE_MASK	PAGE_MASK
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define HPAGE_SHIFT	16
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
+#define HPAGE_SHIFT	18
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#define HPAGE_SHIFT	20
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define HPAGE_SHIFT	22
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
+#define HPAGE_SHIFT	26
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
+#define HPAGE_SHIFT	29
+#endif
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE		(1UL << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE-1))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT-PAGE_SHIFT)
+#endif
+
+#ifndef __ASSEMBLY__
+
+extern unsigned long shm_align_mask;
+extern unsigned long max_low_pfn, min_low_pfn;
+extern unsigned long memory_start, memory_end;
+
+extern void clear_page(void *to);
+extern void copy_page(void *to, void *from);
+
+#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \
+	(defined(CONFIG_CPU_SH5) || defined(CONFIG_CPU_SH4) || \
+	 defined(CONFIG_SH7705_CACHE_32KB))
+struct page;
+struct vm_area_struct;
+extern void clear_user_page(void *to, unsigned long address, struct page *page);
+extern void copy_user_page(void *to, void *from, unsigned long address,
+			   struct page *page);
+#if defined(CONFIG_CPU_SH4)
+extern void copy_user_highpage(struct page *to, struct page *from,
+			       unsigned long vaddr, struct vm_area_struct *vma);
+#define __HAVE_ARCH_COPY_USER_HIGHPAGE
+#endif
+#else
+#define clear_user_page(page, vaddr, pg)	clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)	copy_page(to, from)
+#endif
+
+/*
+ * These are used to make use of C type-checking..
+ */
+#ifdef CONFIG_X2TLB
+typedef struct { unsigned long pte_low, pte_high; } pte_t;
+typedef struct { unsigned long long pgprot; } pgprot_t;
+typedef struct { unsigned long long pgd; } pgd_t;
+#define pte_val(x) \
+	((x).pte_low | ((unsigned long long)(x).pte_high << 32))
+#define __pte(x) \
+	({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; })
+#elif defined(CONFIG_SUPERH32)
+typedef struct { unsigned long pte_low; } pte_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#define pte_val(x)	((x).pte_low)
+#define __pte(x)	((pte_t) { (x) } )
+#else
+typedef struct { unsigned long long pte_low; } pte_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long pgd; } pgd_t;
+#define pte_val(x)	((x).pte_low)
+#define __pte(x)	((pte_t) { (x) } )
+#endif
+
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pgd(x) ((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+typedef struct page *pgtable_t;
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * __MEMORY_START and SIZE are the physical addresses and size of RAM.
+ */
+#define __MEMORY_START		CONFIG_MEMORY_START
+#define __MEMORY_SIZE		CONFIG_MEMORY_SIZE
+
+/*
+ * PAGE_OFFSET is the virtual address of the start of kernel address
+ * space.
+ */
+#define PAGE_OFFSET		CONFIG_PAGE_OFFSET
+
+/*
+ * Virtual to physical RAM address translation.
+ *
+ * In 29 bit mode, the physical offset of RAM from address 0 is visible in
+ * the kernel virtual address space, and thus we don't have to take
+ * this into account when translating. However in 32 bit mode this offset
+ * is not visible (it is part of the PMB mapping) and so needs to be
+ * added or subtracted as required.
+ */
+#ifdef CONFIG_32BIT
+#define __pa(x)	((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START)
+#define __va(x)	((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START))
+#else
+#define __pa(x)	((unsigned long)(x)-PAGE_OFFSET)
+#define __va(x)	((void *)((unsigned long)(x)+PAGE_OFFSET))
+#endif
+
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+/*
+ * PFN = physical frame number (ie PFN 0 == physical address 0)
+ * PFN_START is the PFN of the first page of RAM. By defining this we
+ * don't have struct page entries for the portion of address space
+ * between physical address 0 and the start of RAM.
+ */
+#define PFN_START		(__MEMORY_START >> PAGE_SHIFT)
+#define ARCH_PFN_OFFSET		(PFN_START)
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
+#ifdef CONFIG_FLATMEM
+#define pfn_valid(pfn)		((pfn) >= min_low_pfn && (pfn) < max_low_pfn)
+#endif
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+/* vDSO support */
+#ifdef CONFIG_VSYSCALL
+#define __HAVE_ARCH_GATE_AREA
+#endif
+
+/*
+ * Some drivers need to perform DMA into kmalloc'ed buffers
+ * and so we have to increase the kmalloc minalign for this.
+ */
+#define ARCH_KMALLOC_MINALIGN	L1_CACHE_BYTES
+
+#ifdef CONFIG_SUPERH64
+/*
+ * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still
+ * happily generate {ld/st}.q pairs, requiring us to have 8-byte
+ * alignment to avoid traps. The kmalloc alignment is gauranteed by
+ * virtue of L1_CACHE_BYTES, requiring this to only be special cased
+ * for slab caches.
+ */
+#define ARCH_SLAB_MINALIGN	8
+#endif
+
+#endif /* __ASM_SH_PAGE_H */
diff --git a/arch/sh/include/asm/param.h b/arch/sh/include/asm/param.h
new file mode 100644
index 000000000000..ae245afdfd6a
--- /dev/null
+++ b/arch/sh/include/asm/param.h
@@ -0,0 +1,22 @@
+#ifndef __ASM_SH_PARAM_H
+#define __ASM_SH_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ
+# define USER_HZ	100		/* User interfaces are in "ticks" */
+# define CLOCKS_PER_SEC	(USER_HZ)	/* frequency at which times() counts */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif /* __ASM_SH_PARAM_H */
diff --git a/arch/sh/include/asm/parport.h b/arch/sh/include/asm/parport.h
new file mode 100644
index 000000000000..f67ba60a2acd
--- /dev/null
+++ b/arch/sh/include/asm/parport.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ */
+#ifndef __ASM_SH_PARPORT_H
+#define __ASM_SH_PARPORT_H
+
+static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma);
+
+static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma)
+{
+	return parport_pc_find_isa_ports(autoirq, autodma);
+}
+
+#endif /* __ASM_SH_PARPORT_H */
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
new file mode 100644
index 000000000000..df1d383e18a5
--- /dev/null
+++ b/arch/sh/include/asm/pci.h
@@ -0,0 +1,144 @@
+#ifndef __ASM_SH_PCI_H
+#define __ASM_SH_PCI_H
+
+#ifdef __KERNEL__
+
+#include <linux/dma-mapping.h>
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+   already-configured bus numbers - to be used for buggy BIOSes
+   or architectures with incomplete PCI setup by the loader */
+
+#define pcibios_assign_all_busses()	1
+#define pcibios_scan_all_fns(a, b)	0
+
+/*
+ * A board can define one or more PCI channels that represent built-in (or
+ * external) PCI controllers.
+ */
+struct pci_channel {
+	struct pci_ops *pci_ops;
+	struct resource *io_resource;
+	struct resource *mem_resource;
+	int first_devfn;
+	int last_devfn;
+};
+
+/*
+ * Each board initializes this array and terminates it with a NULL entry.
+ */
+extern struct pci_channel board_pci_channels[];
+
+#define PCIBIOS_MIN_IO		board_pci_channels->io_resource->start
+#define PCIBIOS_MIN_MEM		board_pci_channels->mem_resource->start
+
+/*
+ * I/O routine helpers
+ */
+#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785)
+#define PCI_IO_AREA		0xFE400000
+#define PCI_IO_SIZE		0x00400000
+#elif defined(CONFIG_CPU_SH5)
+extern unsigned long PCI_IO_AREA;
+#define PCI_IO_SIZE		0x00010000
+#else
+#define PCI_IO_AREA		0xFE240000
+#define PCI_IO_SIZE		0x00040000
+#endif
+
+#define PCI_MEM_SIZE		0x01000000
+
+#define SH4_PCIIOBR_MASK	0xFFFC0000
+#define pci_ioaddr(addr)	(PCI_IO_AREA + (addr & ~SH4_PCIIOBR_MASK))
+
+#if defined(CONFIG_PCI)
+#define is_pci_ioaddr(port)		\
+	(((port) >= PCIBIOS_MIN_IO) &&	\
+	 ((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE)))
+#define is_pci_memaddr(port)		\
+	(((port) >= PCIBIOS_MIN_MEM) &&	\
+	 ((port) < (PCIBIOS_MIN_MEM + PCI_MEM_SIZE)))
+#else
+#define is_pci_ioaddr(port)	(0)
+#define is_pci_memaddr(port)	(0)
+#endif
+
+struct pci_dev;
+
+extern void pcibios_set_master(struct pci_dev *dev);
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* Dynamic DMA mapping stuff.
+ * SuperH has everything mapped statically like x86.
+ */
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(1)
+
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/scatterlist.h>
+#include <linux/string.h>
+#include <asm/io.h>
+
+/* pci_unmap_{single,page} being a nop depends upon the
+ * configuration.
+ */
+#ifdef CONFIG_SH_PCIDMA_NONCOHERENT
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+#else
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+#endif
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
+/* Board-specific fixup routines. */
+void pcibios_fixup(void);
+int pcibios_init_platform(void);
+int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin);
+
+#ifdef CONFIG_PCI_AUTO
+int pciauto_assign_resources(int busno, struct pci_channel *hose);
+#endif
+
+#endif /* __KERNEL__ */
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+/* generic DMA-mapping stuff */
+#include <asm-generic/pci-dma-compat.h>
+
+#endif /* __ASM_SH_PCI_H */
+
diff --git a/arch/sh/include/asm/percpu.h b/arch/sh/include/asm/percpu.h
new file mode 100644
index 000000000000..4db4b39a4399
--- /dev/null
+++ b/arch/sh/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_SH_PERCPU
+#define __ARCH_SH_PERCPU
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_SH_PERCPU */
diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h
new file mode 100644
index 000000000000..84dd2db7104c
--- /dev/null
+++ b/arch/sh/include/asm/pgalloc.h
@@ -0,0 +1,96 @@
+#ifndef __ASM_SH_PGALLOC_H
+#define __ASM_SH_PGALLOC_H
+
+#include <linux/quicklist.h>
+#include <asm/page.h>
+
+#define QUICK_PGD 0	/* We preserve special mappings over free */
+#define QUICK_PT 1	/* Other page table pages that are zero on free */
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+				       pte_t *pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)pte));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+				pgtable_t pte)
+{
+	set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline void pgd_ctor(void *x)
+{
+	pgd_t *pgd = x;
+
+	memcpy(pgd + USER_PTRS_PER_PGD,
+	       swapper_pg_dir + USER_PTRS_PER_PGD,
+	       (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+}
+
+/*
+ * Allocate and free page tables.
+ */
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor);
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	quicklist_free(QUICK_PGD, NULL, pgd);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+					  unsigned long address)
+{
+	return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+					unsigned long address)
+{
+	struct page *page;
+	void *pg;
+
+	pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
+	if (!pg)
+		return NULL;
+	page = virt_to_page(pg);
+	pgtable_page_ctor(page);
+	return page;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	quicklist_free(QUICK_PT, NULL, pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+{
+	pgtable_page_dtor(pte);
+	quicklist_free_page(QUICK_PT, NULL, pte);
+}
+
+#define __pte_free_tlb(tlb,pte)				\
+do {							\
+	pgtable_page_dtor(pte);				\
+	tlb_remove_page((tlb), (pte));			\
+} while (0)
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+
+#define pmd_free(mm, x)			do { } while (0)
+#define __pmd_free_tlb(tlb,x)		do { } while (0)
+
+static inline void check_pgt_cache(void)
+{
+	quicklist_trim(QUICK_PGD, NULL, 25, 16);
+	quicklist_trim(QUICK_PT, NULL, 25, 16);
+}
+
+#endif /* __ASM_SH_PGALLOC_H */
diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h
new file mode 100644
index 000000000000..a4a8f8b93463
--- /dev/null
+++ b/arch/sh/include/asm/pgtable.h
@@ -0,0 +1,152 @@
+/*
+ * This file contains the functions and defines necessary to modify and
+ * use the SuperH page table tree.
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2002 - 2007 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file "COPYING" in the main directory of this
+ * archive for more details.
+ */
+#ifndef __ASM_SH_PGTABLE_H
+#define __ASM_SH_PGTABLE_H
+
+#include <asm-generic/pgtable-nopmd.h>
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/addrspace.h>
+#include <asm/fixmap.h>
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * Effective and physical address definitions, to aid with sign
+ * extension.
+ */
+#define NEFF		32
+#define	NEFF_SIGN	(1LL << (NEFF - 1))
+#define	NEFF_MASK	(-1LL << NEFF)
+
+#ifdef CONFIG_29BIT
+#define NPHYS		29
+#else
+#define NPHYS		32
+#endif
+
+#define	NPHYS_SIGN	(1LL << (NPHYS - 1))
+#define	NPHYS_MASK	(-1LL << NPHYS)
+
+/*
+ * traditional two-level paging structure
+ */
+/* PTE bits */
+#if defined(CONFIG_X2TLB) || defined(CONFIG_SUPERH64)
+# define PTE_MAGNITUDE	3	/* 64-bit PTEs on extended mode SH-X2 TLB */
+#else
+# define PTE_MAGNITUDE	2	/* 32-bit PTEs */
+#endif
+#define PTE_SHIFT	PAGE_SHIFT
+#define PTE_BITS	(PTE_SHIFT - PTE_MAGNITUDE)
+
+/* PGD bits */
+#define PGDIR_SHIFT	(PTE_SHIFT + PTE_BITS)
+#define PGDIR_SIZE	(1UL << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+
+/* Entries per level */
+#define PTRS_PER_PTE	(PAGE_SIZE / (1 << PTE_MAGNITUDE))
+#define PTRS_PER_PGD	(PAGE_SIZE / sizeof(pgd_t))
+
+#define USER_PTRS_PER_PGD	(TASK_SIZE/PGDIR_SIZE)
+#define FIRST_USER_ADDRESS	0
+
+#ifdef CONFIG_32BIT
+#define PHYS_ADDR_MASK		0xffffffff
+#else
+#define PHYS_ADDR_MASK		0x1fffffff
+#endif
+
+#define PTE_PHYS_MASK		(PHYS_ADDR_MASK & PAGE_MASK)
+
+#ifdef CONFIG_SUPERH32
+#define VMALLOC_START	(P3SEG)
+#else
+#define VMALLOC_START	(0xf0000000)
+#endif
+#define VMALLOC_END	(FIXADDR_START-2*PAGE_SIZE)
+
+#if defined(CONFIG_SUPERH32)
+#include <asm/pgtable_32.h>
+#else
+#include <asm/pgtable_64.h>
+#endif
+
+/*
+ * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page
+ * protection for execute, and considers it the same as a read. Also, write
+ * permission implies read permission. This is the closest we can get..
+ *
+ * SH-X2 (SH7785) and later parts take this to the opposite end of the extreme,
+ * not only supporting separate execute, read, and write bits, but having
+ * completely separate permission bits for user and kernel space.
+ */
+	 /*xwr*/
+#define __P000	PAGE_NONE
+#define __P001	PAGE_READONLY
+#define __P010	PAGE_COPY
+#define __P011	PAGE_COPY
+#define __P100	PAGE_EXECREAD
+#define __P101	PAGE_EXECREAD
+#define __P110	PAGE_COPY
+#define __P111	PAGE_COPY
+
+#define __S000	PAGE_NONE
+#define __S001	PAGE_READONLY
+#define __S010	PAGE_WRITEONLY
+#define __S011	PAGE_SHARED
+#define __S100	PAGE_EXECREAD
+#define __S101	PAGE_EXECREAD
+#define __S110	PAGE_RWX
+#define __S111	PAGE_RWX
+
+typedef pte_t *pte_addr_t;
+
+#define kern_addr_valid(addr)	(1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)		\
+		remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+#define pte_pfn(x)		((unsigned long)(((x).pte_low >> PAGE_SHIFT)))
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \
+	defined(CONFIG_SH7705_CACHE_32KB))
+struct mm_struct;
+#define __HAVE_ARCH_PTEP_GET_AND_CLEAR
+pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
+#endif
+
+struct vm_area_struct;
+extern void update_mmu_cache(struct vm_area_struct * vma,
+			     unsigned long address, pte_t pte);
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern void paging_init(void);
+extern void page_table_range_init(unsigned long start, unsigned long end,
+				  pgd_t *pgd);
+
+#include <asm-generic/pgtable.h>
+
+#endif /* __ASM_SH_PGTABLE_H */
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
new file mode 100644
index 000000000000..72ea209195bd
--- /dev/null
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -0,0 +1,479 @@
+#ifndef __ASM_SH_PGTABLE_32_H
+#define __ASM_SH_PGTABLE_32_H
+
+/*
+ * Linux PTEL encoding.
+ *
+ * Hardware and software bit definitions for the PTEL value (see below for
+ * notes on SH-X2 MMUs and 64-bit PTEs):
+ *
+ * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4).
+ *
+ * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the
+ *   hardware PTEL value can't have the SH-bit set when MMUCR.IX is set,
+ *   which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT).
+ *
+ *   In order to keep this relatively clean, do not use these for defining
+ *   SH-3 specific flags until all of the other unused bits have been
+ *   exhausted.
+ *
+ * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE.
+ *
+ * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages.
+ *   Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused.
+ *
+ * - On 29 bit platforms, bits 31 to 29 are used for the space attributes
+ *   and timing control which (together with bit 0) are moved into the
+ *   old-style PTEA on the parts that support it.
+ *
+ * XXX: Leave the _PAGE_FILE and _PAGE_WT overhaul for a rainy day.
+ *
+ * SH-X2 MMUs and extended PTEs
+ *
+ * SH-X2 supports an extended mode TLB with split data arrays due to the
+ * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and
+ * SZ bit placeholders still exist in data array 1, but are implemented as
+ * reserved bits, with the real logic existing in data array 2.
+ *
+ * The downside to this is that we can no longer fit everything in to a 32-bit
+ * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus
+ * side, this gives us quite a few spare bits to play with for future usage.
+ */
+/* Legacy and compat mode bits */
+#define	_PAGE_WT	0x001		/* WT-bit on SH-4, 0 on SH-3 */
+#define _PAGE_HW_SHARED	0x002		/* SH-bit  : shared among processes */
+#define _PAGE_DIRTY	0x004		/* D-bit   : page changed */
+#define _PAGE_CACHABLE	0x008		/* C-bit   : cachable */
+#define _PAGE_SZ0	0x010		/* SZ0-bit : Size of page */
+#define _PAGE_RW	0x020		/* PR0-bit : write access allowed */
+#define _PAGE_USER	0x040		/* PR1-bit : user space access allowed*/
+#define _PAGE_SZ1	0x080		/* SZ1-bit : Size of page (on SH-4) */
+#define _PAGE_PRESENT	0x100		/* V-bit   : page is valid */
+#define _PAGE_PROTNONE	0x200		/* software: if not present  */
+#define _PAGE_ACCESSED	0x400		/* software: page referenced */
+#define _PAGE_FILE	_PAGE_WT	/* software: pagecache or swap? */
+
+#define _PAGE_SZ_MASK	(_PAGE_SZ0 | _PAGE_SZ1)
+#define _PAGE_PR_MASK	(_PAGE_RW | _PAGE_USER)
+
+/* Extended mode bits */
+#define _PAGE_EXT_ESZ0		0x0010	/* ESZ0-bit: Size of page */
+#define _PAGE_EXT_ESZ1		0x0020	/* ESZ1-bit: Size of page */
+#define _PAGE_EXT_ESZ2		0x0040	/* ESZ2-bit: Size of page */
+#define _PAGE_EXT_ESZ3		0x0080	/* ESZ3-bit: Size of page */
+
+#define _PAGE_EXT_USER_EXEC	0x0100	/* EPR0-bit: User space executable */
+#define _PAGE_EXT_USER_WRITE	0x0200	/* EPR1-bit: User space writable */
+#define _PAGE_EXT_USER_READ	0x0400	/* EPR2-bit: User space readable */
+
+#define _PAGE_EXT_KERN_EXEC	0x0800	/* EPR3-bit: Kernel space executable */
+#define _PAGE_EXT_KERN_WRITE	0x1000	/* EPR4-bit: Kernel space writable */
+#define _PAGE_EXT_KERN_READ	0x2000	/* EPR5-bit: Kernel space readable */
+
+/* Wrapper for extended mode pgprot twiddling */
+#define _PAGE_EXT(x)		((unsigned long long)(x) << 32)
+
+/* software: moves to PTEA.TC (Timing Control) */
+#define _PAGE_PCC_AREA5	0x00000000	/* use BSC registers for area5 */
+#define _PAGE_PCC_AREA6	0x80000000	/* use BSC registers for area6 */
+
+/* software: moves to PTEA.SA[2:0] (Space Attributes) */
+#define _PAGE_PCC_IODYN 0x00000001	/* IO space, dynamically sized bus */
+#define _PAGE_PCC_IO8	0x20000000	/* IO space, 8 bit bus */
+#define _PAGE_PCC_IO16	0x20000001	/* IO space, 16 bit bus */
+#define _PAGE_PCC_COM8	0x40000000	/* Common Memory space, 8 bit bus */
+#define _PAGE_PCC_COM16	0x40000001	/* Common Memory space, 16 bit bus */
+#define _PAGE_PCC_ATR8	0x60000000	/* Attribute Memory space, 8 bit bus */
+#define _PAGE_PCC_ATR16	0x60000001	/* Attribute Memory space, 6 bit bus */
+
+/* Mask which drops unused bits from the PTEL value */
+#if defined(CONFIG_CPU_SH3)
+#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED| \
+				 _PAGE_FILE	| _PAGE_SZ1	| \
+				 _PAGE_HW_SHARED)
+#elif defined(CONFIG_X2TLB)
+/* Get rid of the legacy PR/SZ bits when using extended mode */
+#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED | \
+				 _PAGE_FILE | _PAGE_PR_MASK | _PAGE_SZ_MASK)
+#else
+#define _PAGE_CLEAR_FLAGS	(_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE)
+#endif
+
+#define _PAGE_FLAGS_HARDWARE_MASK	(PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS))
+
+/* Hardware flags, page size encoding */
+#if !defined(CONFIG_MMU)
+# define _PAGE_FLAGS_HARD	0ULL
+#elif defined(CONFIG_X2TLB)
+# if defined(CONFIG_PAGE_SIZE_4KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ0)
+# elif defined(CONFIG_PAGE_SIZE_8KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ1)
+# elif defined(CONFIG_PAGE_SIZE_64KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_EXT(_PAGE_EXT_ESZ2)
+# endif
+#else
+# if defined(CONFIG_PAGE_SIZE_4KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_SZ0
+# elif defined(CONFIG_PAGE_SIZE_64KB)
+#  define _PAGE_FLAGS_HARD	_PAGE_SZ1
+# endif
+#endif
+
+#if defined(CONFIG_X2TLB)
+# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ3)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB)
+#  define _PAGE_SZHUGE	(_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3)
+# endif
+#else
+# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#  define _PAGE_SZHUGE	(_PAGE_SZ1)
+# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#  define _PAGE_SZHUGE	(_PAGE_SZ0 | _PAGE_SZ1)
+# endif
+#endif
+
+/*
+ * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
+ * to make pte_mkhuge() happy.
+ */
+#ifndef _PAGE_SZHUGE
+# define _PAGE_SZHUGE	(_PAGE_FLAGS_HARD)
+#endif
+
+#define _PAGE_CHG_MASK \
+	(PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY)
+
+#ifndef __ASSEMBLY__
+
+#if defined(CONFIG_X2TLB) /* SH-X2 TLB */
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ  | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_USER_READ  | \
+					   _PAGE_EXT_USER_WRITE))
+
+#define PAGE_EXECREAD	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \
+					   _PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_USER_EXEC | \
+					   _PAGE_EXT_USER_READ))
+
+#define PAGE_COPY	PAGE_EXECREAD
+
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_USER_READ))
+
+#define PAGE_WRITEONLY	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_USER_WRITE))
+
+#define PAGE_RWX	__pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \
+				 _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_READ  | \
+					   _PAGE_EXT_KERN_EXEC  | \
+					   _PAGE_EXT_USER_WRITE | \
+					   _PAGE_EXT_USER_READ  | \
+					   _PAGE_EXT_USER_EXEC))
+
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_EXEC))
+
+#define PAGE_KERNEL_NOCACHE \
+			__pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
+				 _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_EXEC))
+
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_EXEC))
+
+#define PAGE_KERNEL_PCC(slot, type) \
+			__pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
+				 _PAGE_EXT(_PAGE_EXT_KERN_READ | \
+					   _PAGE_EXT_KERN_WRITE | \
+					   _PAGE_EXT_KERN_EXEC) \
+				 (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
+				 (type))
+
+#elif defined(CONFIG_MMU) /* SH-X TLB */
+#define PAGE_NONE	__pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_SHARED	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \
+				 _PAGE_CACHABLE | _PAGE_ACCESSED | \
+				 _PAGE_FLAGS_HARD)
+
+#define PAGE_COPY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_READONLY	__pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD)
+
+#define PAGE_EXECREAD	PAGE_READONLY
+#define PAGE_RWX	PAGE_SHARED
+#define PAGE_WRITEONLY	PAGE_SHARED
+
+#define PAGE_KERNEL	__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
+
+#define PAGE_KERNEL_NOCACHE \
+			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_HW_SHARED | \
+				 _PAGE_FLAGS_HARD)
+
+#define PAGE_KERNEL_RO	__pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \
+				 _PAGE_DIRTY | _PAGE_ACCESSED | \
+				 _PAGE_HW_SHARED | _PAGE_FLAGS_HARD)
+
+#define PAGE_KERNEL_PCC(slot, type) \
+			__pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \
+				 _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \
+				 (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \
+				 (type))
+#else /* no mmu */
+#define PAGE_NONE		__pgprot(0)
+#define PAGE_SHARED		__pgprot(0)
+#define PAGE_COPY		__pgprot(0)
+#define PAGE_EXECREAD		__pgprot(0)
+#define PAGE_RWX		__pgprot(0)
+#define PAGE_READONLY		__pgprot(0)
+#define PAGE_WRITEONLY		__pgprot(0)
+#define PAGE_KERNEL		__pgprot(0)
+#define PAGE_KERNEL_NOCACHE	__pgprot(0)
+#define PAGE_KERNEL_RO		__pgprot(0)
+
+#define PAGE_KERNEL_PCC(slot, type) \
+				__pgprot(0)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Certain architectures need to do special things when PTEs
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#ifdef CONFIG_X2TLB
+static inline void set_pte(pte_t *ptep, pte_t pte)
+{
+	ptep->pte_high = pte.pte_high;
+	smp_wmb();
+	ptep->pte_low = pte.pte_low;
+}
+#else
+#define set_pte(pteptr, pteval) (*(pteptr) = pteval)
+#endif
+
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+/*
+ * (pmds are folded into pgds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+#define pfn_pte(pfn, prot) \
+	__pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot) \
+	__pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define pte_none(x)		(!pte_val(x))
+#define pte_present(x)		((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE))
+
+#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0)
+
+#define pmd_none(x)	(!pmd_val(x))
+#define pmd_present(x)	(pmd_val(x))
+#define pmd_clear(xp)	do { set_pmd(xp, __pmd(0)); } while (0)
+#define	pmd_bad(x)	(pmd_val(x) & ~PAGE_MASK)
+
+#define pages_to_mb(x)	((x) >> (20-PAGE_SHIFT))
+#define pte_page(x)	pfn_to_page(pte_pfn(x))
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+#define pte_not_present(pte)	(!((pte).pte_low & _PAGE_PRESENT))
+#define pte_dirty(pte)		((pte).pte_low & _PAGE_DIRTY)
+#define pte_young(pte)		((pte).pte_low & _PAGE_ACCESSED)
+#define pte_file(pte)		((pte).pte_low & _PAGE_FILE)
+#define pte_special(pte)	(0)
+
+#ifdef CONFIG_X2TLB
+#define pte_write(pte)		((pte).pte_high & _PAGE_EXT_USER_WRITE)
+#else
+#define pte_write(pte)		((pte).pte_low & _PAGE_RW)
+#endif
+
+#define PTE_BIT_FUNC(h,fn,op) \
+static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; }
+
+#ifdef CONFIG_X2TLB
+/*
+ * We cheat a bit in the SH-X2 TLB case. As the permission bits are
+ * individually toggled (and user permissions are entirely decoupled from
+ * kernel permissions), we attempt to couple them a bit more sanely here.
+ */
+PTE_BIT_FUNC(high, wrprotect, &= ~_PAGE_EXT_USER_WRITE);
+PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE);
+PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE);
+#else
+PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW);
+PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW);
+PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE);
+#endif
+
+PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY);
+PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY);
+PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED);
+PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED);
+
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+/*
+ * Macro and implementation to make a page protection as uncachable.
+ */
+#define pgprot_writecombine(prot) \
+	__pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
+
+#define pgprot_noncached	 pgprot_writecombine
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ *
+ * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
+ */
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	pte.pte_low &= _PAGE_CHG_MASK;
+	pte.pte_low |= pgprot_val(newprot);
+
+#ifdef CONFIG_X2TLB
+	pte.pte_high |= pgprot_val(newprot) >> 32;
+#endif
+
+	return pte;
+}
+
+#define pmd_page_vaddr(pmd)	((unsigned long)pmd_val(pmd))
+#define pmd_page(pmd)		(virt_to_page(pmd_val(pmd)))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define pgd_offset(mm, address)	((mm)->pgd+pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address)	pgd_offset(&init_mm, address)
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(address)	((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+#define pte_offset_kernel(dir, address) \
+	((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address))
+#define pte_offset_map(dir, address)		pte_offset_kernel(dir, address)
+#define pte_offset_map_nested(dir, address)	pte_offset_kernel(dir, address)
+
+#define pte_unmap(pte)		do { } while (0)
+#define pte_unmap_nested(pte)	do { } while (0)
+
+#ifdef CONFIG_X2TLB
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \
+	       &(e), (e).pte_high, (e).pte_low)
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e))
+#else
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+#endif
+
+/*
+ * Encode and de-code a swap entry
+ *
+ * Constraints:
+ *	_PAGE_FILE at bit 0
+ *	_PAGE_PRESENT at bit 8
+ *	_PAGE_PROTNONE at bit 9
+ *
+ * For the normal case, we encode the swap type into bits 0:7 and the
+ * swap offset into bits 10:30. For the 64-bit PTE case, we keep the
+ * preserved bits in the low 32-bits and use the upper 32 as the swap
+ * offset (along with a 5-bit type), following the same approach as x86
+ * PAE. This keeps the logic quite simple, and allows for a full 32
+ * PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with
+ * in the pte_low case.
+ *
+ * As is evident by the Alpha code, if we ever get a 64-bit unsigned
+ * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes
+ * much cleaner..
+ *
+ * NOTE: We should set ZEROs at the position of _PAGE_PRESENT
+ *       and _PAGE_PROTNONE bits
+ */
+#ifdef CONFIG_X2TLB
+#define __swp_type(x)			((x).val & 0x1f)
+#define __swp_offset(x)			((x).val >> 5)
+#define __swp_entry(type, offset)	((swp_entry_t){ (type) | (offset) << 5})
+#define __pte_to_swp_entry(pte)		((swp_entry_t){ (pte).pte_high })
+#define __swp_entry_to_pte(x)		((pte_t){ 0, (x).val })
+
+/*
+ * Encode and decode a nonlinear file mapping entry
+ */
+#define pte_to_pgoff(pte)		((pte).pte_high)
+#define pgoff_to_pte(off)		((pte_t) { _PAGE_FILE, (off) })
+
+#define PTE_FILE_MAX_BITS		32
+#else
+#define __swp_type(x)			((x).val & 0xff)
+#define __swp_offset(x)			((x).val >> 10)
+#define __swp_entry(type, offset)	((swp_entry_t){(type) | (offset) <<10})
+
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) >> 1 })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val << 1 })
+
+/*
+ * Encode and decode a nonlinear file mapping entry
+ */
+#define PTE_FILE_MAX_BITS	29
+#define pte_to_pgoff(pte)	(pte_val(pte) >> 1)
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 1) | _PAGE_FILE })
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_PGTABLE_32_H */
diff --git a/arch/sh/include/asm/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h
new file mode 100644
index 000000000000..c78990cda557
--- /dev/null
+++ b/arch/sh/include/asm/pgtable_64.h
@@ -0,0 +1,314 @@
+#ifndef __ASM_SH_PGTABLE_64_H
+#define __ASM_SH_PGTABLE_64_H
+
+/*
+ * include/asm-sh/pgtable_64.h
+ *
+ * This file contains the functions and defines necessary to modify and use
+ * the SuperH page table tree.
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ * Copyright (C) 2003, 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/threads.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+
+/*
+ * Error outputs.
+ */
+#define pte_ERROR(e) \
+	printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+	printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Table setting routines. Used within arch/mm only.
+ */
+#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval)
+
+static __inline__ void set_pte(pte_t *pteptr, pte_t pteval)
+{
+	unsigned long long x = ((unsigned long long) pteval.pte_low);
+	unsigned long long *xp = (unsigned long long *) pteptr;
+	/*
+	 * Sign-extend based on NPHYS.
+	 */
+	*(xp) = (x & NPHYS_SIGN) ? (x | NPHYS_MASK) : x;
+}
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep)
+{
+	pmd_val(*pmdp) = (unsigned long) ptep;
+}
+
+/*
+ * PGD defines. Top level.
+ */
+
+/* To find an entry in a generic PGD. */
+#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+#define __pgd_offset(address) pgd_index(address)
+#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+
+/* To find an entry in a kernel PGD. */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/*
+ * PMD level access routines. Same notes as above.
+ */
+#define _PMD_EMPTY		0x0
+/* Either the PMD is empty or present, it's not paged out */
+#define pmd_present(pmd_entry)	(pmd_val(pmd_entry) & _PAGE_PRESENT)
+#define pmd_clear(pmd_entry_p)	(set_pmd((pmd_entry_p), __pmd(_PMD_EMPTY)))
+#define pmd_none(pmd_entry)	(pmd_val((pmd_entry)) == _PMD_EMPTY)
+#define pmd_bad(pmd_entry)	((pmd_val(pmd_entry) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+
+#define pmd_page_vaddr(pmd_entry) \
+	((unsigned long) __va(pmd_val(pmd_entry) & PAGE_MASK))
+
+#define pmd_page(pmd) \
+	(virt_to_page(pmd_val(pmd)))
+
+/* PMD to PTE dereferencing */
+#define pte_index(address) \
+		((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
+
+#define pte_offset_kernel(dir, addr) \
+		((pte_t *) ((pmd_val(*(dir))) & PAGE_MASK) + pte_index((addr)))
+
+#define pte_offset_map(dir,addr)	pte_offset_kernel(dir, addr)
+#define pte_offset_map_nested(dir,addr)	pte_offset_kernel(dir, addr)
+#define pte_unmap(pte)		do { } while (0)
+#define pte_unmap_nested(pte)	do { } while (0)
+
+#ifndef __ASSEMBLY__
+#define IOBASE_VADDR	0xff000000
+#define IOBASE_END	0xffffffff
+
+/*
+ * PTEL coherent flags.
+ * See Chapter 17 ST50 CPU Core Volume 1, Architecture.
+ */
+/* The bits that are required in the SH-5 TLB are placed in the h/w-defined
+   positions, to avoid expensive bit shuffling on every refill.  The remaining
+   bits are used for s/w purposes and masked out on each refill.
+
+   Note, the PTE slots are used to hold data of type swp_entry_t when a page is
+   swapped out.  Only the _PAGE_PRESENT flag is significant when the page is
+   swapped out, and it must be placed so that it doesn't overlap either the
+   type or offset fields of swp_entry_t.  For x86, offset is at [31:8] and type
+   at [6:1], with _PAGE_PRESENT at bit 0 for both pte_t and swp_entry_t.  This
+   scheme doesn't map to SH-5 because bit [0] controls cacheability.  So bit
+   [2] is used for _PAGE_PRESENT and the type field of swp_entry_t is split
+   into 2 pieces.  That is handled by SWP_ENTRY and SWP_TYPE below. */
+#define _PAGE_WT	0x001  /* CB0: if cacheable, 1->write-thru, 0->write-back */
+#define _PAGE_DEVICE	0x001  /* CB0: if uncacheable, 1->device (i.e. no write-combining or reordering at bus level) */
+#define _PAGE_CACHABLE	0x002  /* CB1: uncachable/cachable */
+#define _PAGE_PRESENT	0x004  /* software: page referenced */
+#define _PAGE_FILE	0x004  /* software: only when !present */
+#define _PAGE_SIZE0	0x008  /* SZ0-bit : size of page */
+#define _PAGE_SIZE1	0x010  /* SZ1-bit : size of page */
+#define _PAGE_SHARED	0x020  /* software: reflects PTEH's SH */
+#define _PAGE_READ	0x040  /* PR0-bit : read access allowed */
+#define _PAGE_EXECUTE	0x080  /* PR1-bit : execute access allowed */
+#define _PAGE_WRITE	0x100  /* PR2-bit : write access allowed */
+#define _PAGE_USER	0x200  /* PR3-bit : user space access allowed */
+#define _PAGE_DIRTY	0x400  /* software: page accessed in write */
+#define _PAGE_ACCESSED	0x800  /* software: page referenced */
+
+/* Mask which drops software flags */
+#define _PAGE_FLAGS_HARDWARE_MASK	0xfffffffffffff3dbLL
+
+/*
+ * HugeTLB support
+ */
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define _PAGE_SZHUGE	(_PAGE_SIZE0)
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB)
+#define _PAGE_SZHUGE	(_PAGE_SIZE1)
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB)
+#define _PAGE_SZHUGE	(_PAGE_SIZE0 | _PAGE_SIZE1)
+#endif
+
+/*
+ * Stub out _PAGE_SZHUGE if we don't have a good definition for it,
+ * to make pte_mkhuge() happy.
+ */
+#ifndef _PAGE_SZHUGE
+# define _PAGE_SZHUGE	(0)
+#endif
+
+/*
+ * Default flags for a Kernel page.
+ * This is fundametally also SHARED because the main use of this define
+ * (other than for PGD/PMD entries) is for the VMALLOC pool which is
+ * contextless.
+ *
+ * _PAGE_EXECUTE is required for modules
+ *
+ */
+#define _KERNPG_TABLE	(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+			 _PAGE_EXECUTE | \
+			 _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_DIRTY | \
+			 _PAGE_SHARED)
+
+/* Default flags for a User page */
+#define _PAGE_TABLE	(_KERNPG_TABLE | _PAGE_USER)
+
+#define _PAGE_CHG_MASK	(PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+
+/*
+ * We have full permissions (Read/Write/Execute/Shared).
+ */
+#define _PAGE_COMMON	(_PAGE_PRESENT | _PAGE_USER | \
+			 _PAGE_CACHABLE | _PAGE_ACCESSED)
+
+#define PAGE_NONE	__pgprot(_PAGE_CACHABLE | _PAGE_ACCESSED)
+#define PAGE_SHARED	__pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_WRITE | \
+				 _PAGE_SHARED)
+#define PAGE_EXECREAD	__pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_EXECUTE)
+
+/*
+ * We need to include PAGE_EXECUTE in PAGE_COPY because it is the default
+ * protection mode for the stack.
+ */
+#define PAGE_COPY	PAGE_EXECREAD
+
+#define PAGE_READONLY	__pgprot(_PAGE_COMMON | _PAGE_READ)
+#define PAGE_WRITEONLY	__pgprot(_PAGE_COMMON | _PAGE_WRITE)
+#define PAGE_RWX	__pgprot(_PAGE_COMMON | _PAGE_READ | \
+				 _PAGE_WRITE | _PAGE_EXECUTE)
+#define PAGE_KERNEL	__pgprot(_KERNPG_TABLE)
+
+#define PAGE_KERNEL_NOCACHE \
+			__pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \
+				 _PAGE_EXECUTE | _PAGE_ACCESSED | \
+				 _PAGE_DIRTY | _PAGE_SHARED)
+
+/* Make it a device mapping for maximum safety (e.g. for mapping device
+   registers into user-space via /dev/map).  */
+#define pgprot_noncached(x) __pgprot(((x).pgprot & ~(_PAGE_CACHABLE)) | _PAGE_DEVICE)
+#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE)
+
+/*
+ * Handling allocation failures during page table setup.
+ */
+extern void __handle_bad_pmd_kernel(pmd_t * pmd);
+#define __handle_bad_pmd(x)	__handle_bad_pmd_kernel(x)
+
+/*
+ * PTE level access routines.
+ *
+ * Note1:
+ * It's the tree walk leaf. This is physical address to be stored.
+ *
+ * Note 2:
+ * Regarding the choice of _PTE_EMPTY:
+
+   We must choose a bit pattern that cannot be valid, whether or not the page
+   is present.  bit[2]==1 => present, bit[2]==0 => swapped out.  If swapped
+   out, bits [31:8], [6:3], [1:0] are under swapper control, so only bit[7] is
+   left for us to select.  If we force bit[7]==0 when swapped out, we could use
+   the combination bit[7,2]=2'b10 to indicate an empty PTE.  Alternatively, if
+   we force bit[7]==1 when swapped out, we can use all zeroes to indicate
+   empty.  This is convenient, because the page tables get cleared to zero
+   when they are allocated.
+
+ */
+#define _PTE_EMPTY	0x0
+#define pte_present(x)	(pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,xp)	(set_pte_at(mm, addr, xp, __pte(_PTE_EMPTY)))
+#define pte_none(x)	(pte_val(x) == _PTE_EMPTY)
+
+/*
+ * Some definitions to translate between mem_map, PTEs, and page
+ * addresses:
+ */
+
+/*
+ * Given a PTE, return the index of the mem_map[] entry corresponding
+ * to the page frame the PTE. Get the absolute physical address, make
+ * a relative physical address and translate it to an index.
+ */
+#define pte_pagenr(x)		(((unsigned long) (pte_val(x)) - \
+				 __MEMORY_START) >> PAGE_SHIFT)
+
+/*
+ * Given a PTE, return the "struct page *".
+ */
+#define pte_page(x)		(mem_map + pte_pagenr(x))
+
+/*
+ * Return number of (down rounded) MB corresponding to x pages.
+ */
+#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
+
+
+/*
+ * The following have defined behavior only work if pte_present() is true.
+ */
+static inline int pte_dirty(pte_t pte)  { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)  { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)   { return pte_val(pte) & _PAGE_FILE; }
+static inline int pte_write(pte_t pte)  { return pte_val(pte) & _PAGE_WRITE; }
+static inline int pte_special(pte_t pte){ return 0; }
+
+static inline pte_t pte_wrprotect(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_WRITE)); return pte; }
+static inline pte_t pte_mkclean(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; }
+static inline pte_t pte_mkold(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; }
+static inline pte_t pte_mkwrite(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_WRITE)); return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; }
+static inline pte_t pte_mkhuge(pte_t pte)	{ set_pte(&pte, __pte(pte_val(pte) | _PAGE_SZHUGE)); return pte; }
+static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
+
+
+/*
+ * Conversion functions: convert a page and protection to a page entry.
+ *
+ * extern pte_t mk_pte(struct page *page, pgprot_t pgprot)
+ */
+#define mk_pte(page,pgprot)							\
+({										\
+	pte_t __pte;								\
+										\
+	set_pte(&__pte, __pte((((page)-mem_map) << PAGE_SHIFT) | 		\
+		__MEMORY_START | pgprot_val((pgprot))));			\
+	__pte;									\
+})
+
+/*
+ * This takes a (absolute) physical page address that is used
+ * by the remapping functions
+ */
+#define mk_pte_phys(physpage, pgprot) \
+({ pte_t __pte; set_pte(&__pte, __pte(physpage | pgprot_val(pgprot))); __pte; })
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; }
+
+/* Encode and decode a swap entry */
+#define __swp_type(x)			(((x).val & 3) + (((x).val >> 1) & 0x3c))
+#define __swp_offset(x)			((x).val >> 8)
+#define __swp_entry(type, offset)	((swp_entry_t) { ((offset << 8) + ((type & 0x3c) << 1) + (type & 3)) })
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+/* Encode and decode a nonlinear file mapping entry */
+#define PTE_FILE_MAX_BITS		29
+#define pte_to_pgoff(pte)		(pte_val(pte))
+#define pgoff_to_pte(off)		((pte_t) { (off) | _PAGE_FILE })
+
+#endif /* !__ASSEMBLY__ */
+
+#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pmd(pfn, prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#endif /* __ASM_SH_PGTABLE_64_H */
diff --git a/arch/sh/include/asm/pm.h b/arch/sh/include/asm/pm.h
new file mode 100644
index 000000000000..56fdbd6b1c94
--- /dev/null
+++ b/arch/sh/include/asm/pm.h
@@ -0,0 +1,17 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2006 (c) Andriy Skulysh <askulysh@gmail.com>
+ *
+ */
+#ifndef __ASM_SH_PM_H
+#define __ASM_SH_PM_H
+
+extern u8 wakeup_start;
+extern u8 wakeup_end;
+
+void pm_enter(void);
+
+#endif
diff --git a/arch/sh/include/asm/poll.h b/arch/sh/include/asm/poll.h
new file mode 100644
index 000000000000..c98509d3149e
--- /dev/null
+++ b/arch/sh/include/asm/poll.h
@@ -0,0 +1 @@
+#include <asm-generic/poll.h>
diff --git a/arch/sh/include/asm/posix_types.h b/arch/sh/include/asm/posix_types.h
new file mode 100644
index 000000000000..4eeb723aee7e
--- /dev/null
+++ b/arch/sh/include/asm/posix_types.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_SUPERH32
+#  include "posix_types_32.h"
+# else
+#  include "posix_types_64.h"
+# endif
+#else
+# ifdef __SH5__
+#  include "posix_types_64.h"
+# else
+#  include "posix_types_32.h"
+# endif
+#endif /* __KERNEL__ */
diff --git a/arch/sh/include/asm/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h
new file mode 100644
index 000000000000..0a3d2f54ab27
--- /dev/null
+++ b/arch/sh/include/asm/posix_types_32.h
@@ -0,0 +1,122 @@
+#ifndef __ASM_SH_POSIX_TYPES_H
+#define __ASM_SH_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef	__FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef	__FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{ 
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef	__FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+	unsigned long *__tmp = __p->fds_bits;
+	int __i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 16:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			__tmp[ 8] = 0; __tmp[ 9] = 0;
+			__tmp[10] = 0; __tmp[11] = 0;
+			__tmp[12] = 0; __tmp[13] = 0;
+			__tmp[14] = 0; __tmp[15] = 0;
+			return;
+
+		case 8:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			return;
+
+		case 4:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			return;
+		}
+	}
+	__i = __FDSET_LONGS;
+	while (__i) {
+		__i--;
+		*__tmp = 0;
+		__tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* __ASM_SH_POSIX_TYPES_H */
diff --git a/arch/sh/include/asm/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h
new file mode 100644
index 000000000000..0620317a6f0f
--- /dev/null
+++ b/arch/sh/include/asm/posix_types_64.h
@@ -0,0 +1,131 @@
+#ifndef __ASM_SH64_POSIX_TYPES_H
+#define __ASM_SH64_POSIX_TYPES_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * include/asm-sh64/posix_types.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned short	__kernel_mode_t;
+typedef unsigned short	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned short	__kernel_uid_t;
+typedef unsigned short	__kernel_gid_t;
+typedef long unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+typedef unsigned short	__kernel_old_uid_t;
+typedef unsigned short	__kernel_old_gid_t;
+typedef unsigned short	__kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+#undef	__FD_SET
+static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] |= (1UL<<__rem);
+}
+
+#undef	__FD_CLR
+static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	__fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem);
+}
+
+
+#undef	__FD_ISSET
+static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p)
+{
+	unsigned long __tmp = __fd / __NFDBITS;
+	unsigned long __rem = __fd % __NFDBITS;
+	return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant case (8 ints,
+ * for a 256-bit fd_set)
+ */
+#undef	__FD_ZERO
+static __inline__ void __FD_ZERO(__kernel_fd_set *__p)
+{
+	unsigned long *__tmp = __p->fds_bits;
+	int __i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+		case 16:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			__tmp[ 8] = 0; __tmp[ 9] = 0;
+			__tmp[10] = 0; __tmp[11] = 0;
+			__tmp[12] = 0; __tmp[13] = 0;
+			__tmp[14] = 0; __tmp[15] = 0;
+			return;
+
+		case 8:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			__tmp[ 4] = 0; __tmp[ 5] = 0;
+			__tmp[ 6] = 0; __tmp[ 7] = 0;
+			return;
+
+		case 4:
+			__tmp[ 0] = 0; __tmp[ 1] = 0;
+			__tmp[ 2] = 0; __tmp[ 3] = 0;
+			return;
+		}
+	}
+	__i = __FDSET_LONGS;
+	while (__i) {
+		__i--;
+		*__tmp = 0;
+		__tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* __ASM_SH64_POSIX_TYPES_H */
diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h
new file mode 100644
index 000000000000..15d9f92ca383
--- /dev/null
+++ b/arch/sh/include/asm/processor.h
@@ -0,0 +1,66 @@
+#ifndef __ASM_SH_PROCESSOR_H
+#define __ASM_SH_PROCESSOR_H
+
+#include <asm/cpu-features.h>
+#include <asm/segment.h>
+
+#ifndef __ASSEMBLY__
+/*
+ *  CPU type and hardware bug flags. Kept separately for each CPU.
+ *
+ *  Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry
+ *  in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c
+ *  for parsing the subtype in get_cpu_subtype().
+ */
+enum cpu_type {
+	/* SH-2 types */
+	CPU_SH7619,
+
+	/* SH-2A types */
+	CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_MXG,
+
+	/* SH-3 types */
+	CPU_SH7705, CPU_SH7706, CPU_SH7707,
+	CPU_SH7708, CPU_SH7708S, CPU_SH7708R,
+	CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712,
+	CPU_SH7720, CPU_SH7721, CPU_SH7729,
+
+	/* SH-4 types */
+	CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R,
+	CPU_SH7760, CPU_SH4_202, CPU_SH4_501,
+
+	/* SH-4A types */
+	CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785,
+	CPU_SH7723, CPU_SHX3,
+
+	/* SH4AL-DSP types */
+	CPU_SH7343, CPU_SH7722, CPU_SH7366,
+
+	/* SH-5 types */
+        CPU_SH5_101, CPU_SH5_103,
+
+	/* Unknown subtype */
+	CPU_SH_NONE
+};
+
+/* Forward decl */
+struct sh_cpuinfo;
+
+/* arch/sh/kernel/setup.c */
+const char *get_cpu_subtype(struct sh_cpuinfo *c);
+
+#ifdef CONFIG_VSYSCALL
+int vsyscall_init(void);
+#else
+#define vsyscall_init() do { } while (0)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_SUPERH32
+# include "processor_32.h"
+#else
+# include "processor_64.h"
+#endif
+
+#endif /* __ASM_SH_PROCESSOR_H */
diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h
new file mode 100644
index 000000000000..0dadd75bd93c
--- /dev/null
+++ b/arch/sh/include/asm/processor_32.h
@@ -0,0 +1,216 @@
+/*
+ * include/asm-sh/processor.h
+ *
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ * Copyright (C) 2002, 2003  Paul Mundt
+ */
+
+#ifndef __ASM_SH_PROCESSOR_32_H
+#define __ASM_SH_PROCESSOR_32_H
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/cache.h>
+#include <asm/ptrace.h>
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("mova	1f, %0\n.align 2\n1:":"=z" (pc)); pc; })
+
+/* Core Processor Version Register */
+#define CCN_PVR		0xff000030
+#define CCN_CVR		0xff000040
+#define CCN_PRR		0xff000044
+
+struct sh_cpuinfo {
+	unsigned int type;
+	int cut_major, cut_minor;
+	unsigned long loops_per_jiffy;
+	unsigned long asid_cache;
+
+	struct cache_info icache;	/* Primary I-cache */
+	struct cache_info dcache;	/* Primary D-cache */
+	struct cache_info scache;	/* Secondary cache */
+
+	unsigned long flags;
+} __attribute__ ((aligned(L1_CACHE_BYTES)));
+
+extern struct sh_cpuinfo cpu_data[];
+#define boot_cpu_data cpu_data[0]
+#define current_cpu_data cpu_data[smp_processor_id()]
+#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
+
+/*
+ * User space process size: 2GB.
+ *
+ * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff
+ */
+#define TASK_SIZE	0x7c000000UL
+
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(TASK_SIZE / 3)
+
+/*
+ * Bit of SR register
+ *
+ * FD-bit:
+ *     When it's set, it means the processor doesn't have right to use FPU,
+ *     and it results exception when the floating operation is executed.
+ *
+ * IMASK-bit:
+ *     Interrupt level mask
+ */
+#define SR_DSP		0x00001000
+#define SR_IMASK	0x000000f0
+#define SR_FD		0x00008000
+
+/*
+ * FPU structure and data
+ */
+
+struct sh_fpu_hard_struct {
+	unsigned long fp_regs[16];
+	unsigned long xfp_regs[16];
+	unsigned long fpscr;
+	unsigned long fpul;
+
+	long status; /* software status information */
+};
+
+/* Dummy fpu emulator  */
+struct sh_fpu_soft_struct {
+	unsigned long fp_regs[16];
+	unsigned long xfp_regs[16];
+	unsigned long fpscr;
+	unsigned long fpul;
+
+	unsigned char lookahead;
+	unsigned long entry_pc;
+};
+
+union sh_fpu_union {
+	struct sh_fpu_hard_struct hard;
+	struct sh_fpu_soft_struct soft;
+};
+
+struct thread_struct {
+	/* Saved registers when thread is descheduled */
+	unsigned long sp;
+	unsigned long pc;
+
+	/* Hardware debugging registers */
+	unsigned long ubc_pc;
+
+	/* floating point info */
+	union sh_fpu_union fpu;
+};
+
+/* Count of active tasks with UBC settings */
+extern int ubc_usercnt;
+
+#define INIT_THREAD  {						\
+	.sp = sizeof(init_stack) + (long) &init_stack,		\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+#define start_thread(regs, new_pc, new_sp)	 \
+	set_fs(USER_DS);			 \
+	regs->pr = 0;				 \
+	regs->sr = SR_FD;	/* User mode. */ \
+	regs->pc = new_pc;			 \
+	regs->regs[15] = new_sp
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Copy and release all segment info associated with a VM */
+#define copy_segments(p, mm)	do { } while(0)
+#define release_segments(mm)	do { } while(0)
+
+/*
+ * FPU lazy state save handling.
+ */
+
+static __inline__ void disable_fpu(void)
+{
+	unsigned long __dummy;
+
+	/* Set FD flag in SR */
+	__asm__ __volatile__("stc	sr, %0\n\t"
+			     "or	%1, %0\n\t"
+			     "ldc	%0, sr"
+			     : "=&r" (__dummy)
+			     : "r" (SR_FD));
+}
+
+static __inline__ void enable_fpu(void)
+{
+	unsigned long __dummy;
+
+	/* Clear out FD flag in SR */
+	__asm__ __volatile__("stc	sr, %0\n\t"
+			     "and	%1, %0\n\t"
+			     "ldc	%0, sr"
+			     : "=&r" (__dummy)
+			     : "r" (~SR_FD));
+}
+
+/* Double presision, NANS as NANS, rounding to nearest, no exceptions */
+#define FPSCR_INIT  0x00080000
+
+#define	FPSCR_CAUSE_MASK	0x0001f000	/* Cause bits */
+#define	FPSCR_FLAG_MASK		0x0000007c	/* Flag bits */
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+#define thread_saved_pc(tsk)	(tsk->thread.pc)
+
+void show_trace(struct task_struct *tsk, unsigned long *sp,
+		struct pt_regs *regs);
+extern unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->pc)
+#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->regs[15])
+
+#define cpu_sleep()	__asm__ __volatile__ ("sleep" : : : "memory")
+#define cpu_relax()	barrier()
+
+#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \
+    defined(CONFIG_CPU_SH4)
+#define PREFETCH_STRIDE		L1_CACHE_BYTES
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+static inline void prefetch(void *x)
+{
+	__asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory");
+}
+
+#define prefetchw(x)	prefetch(x)
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_PROCESSOR_32_H */
diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h
new file mode 100644
index 000000000000..770d5169983b
--- /dev/null
+++ b/arch/sh/include/asm/processor_64.h
@@ -0,0 +1,275 @@
+#ifndef __ASM_SH_PROCESSOR_64_H
+#define __ASM_SH_PROCESSOR_64_H
+
+/*
+ * include/asm-sh/processor_64.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+#include <asm/page.h>
+#include <asm/types.h>
+#include <asm/cache.h>
+#include <asm/ptrace.h>
+#include <cpu/registers.h>
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ \
+void *pc; \
+unsigned long long __dummy = 0; \
+__asm__("gettr	tr0, %1\n\t" \
+	"pta	4, tr0\n\t" \
+	"gettr	tr0, %0\n\t" \
+	"ptabs	%1, tr0\n\t"	\
+	:"=r" (pc), "=r" (__dummy) \
+	: "1" (__dummy)); \
+pc; })
+
+/*
+ * TLB information structure
+ *
+ * Defined for both I and D tlb, per-processor.
+ */
+struct tlb_info {
+	unsigned long long next;
+	unsigned long long first;
+	unsigned long long last;
+
+	unsigned int entries;
+	unsigned int step;
+
+	unsigned long flags;
+};
+
+struct sh_cpuinfo {
+	enum cpu_type type;
+	unsigned long loops_per_jiffy;
+	unsigned long asid_cache;
+
+	unsigned int cpu_clock, master_clock, bus_clock, module_clock;
+
+	/* Cache info */
+	struct cache_info icache;
+	struct cache_info dcache;
+	struct cache_info scache;
+
+	/* TLB info */
+	struct tlb_info itlb;
+	struct tlb_info dtlb;
+
+	unsigned long flags;
+};
+
+extern struct sh_cpuinfo cpu_data[];
+#define boot_cpu_data cpu_data[0]
+#define current_cpu_data cpu_data[smp_processor_id()]
+#define raw_current_cpu_data cpu_data[raw_smp_processor_id()]
+
+#endif
+
+/*
+ * User space process size: 2GB - 4k.
+ */
+#define TASK_SIZE	0x7ffff000UL
+
+#define STACK_TOP	TASK_SIZE
+#define STACK_TOP_MAX	STACK_TOP
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#define TASK_UNMAPPED_BASE	(TASK_SIZE / 3)
+
+/*
+ * Bit of SR register
+ *
+ * FD-bit:
+ *     When it's set, it means the processor doesn't have right to use FPU,
+ *     and it results exception when the floating operation is executed.
+ *
+ * IMASK-bit:
+ *     Interrupt level mask
+ *
+ * STEP-bit:
+ *     Single step bit
+ *
+ */
+#if defined(CONFIG_SH64_SR_WATCH)
+#define SR_MMU   0x84000000
+#else
+#define SR_MMU   0x80000000
+#endif
+
+#define SR_IMASK 0x000000f0
+#define SR_FD    0x00008000
+#define SR_SSTEP 0x08000000
+
+#ifndef __ASSEMBLY__
+
+/*
+ * FPU structure and data : require 8-byte alignment as we need to access it
+   with fld.p, fst.p
+ */
+
+struct sh_fpu_hard_struct {
+	unsigned long fp_regs[64];
+	unsigned int fpscr;
+	/* long status; * software status information */
+};
+
+#if 0
+/* Dummy fpu emulator  */
+struct sh_fpu_soft_struct {
+	unsigned long long fp_regs[32];
+	unsigned int fpscr;
+	unsigned char lookahead;
+	unsigned long entry_pc;
+};
+#endif
+
+union sh_fpu_union {
+	struct sh_fpu_hard_struct hard;
+	/* 'hard' itself only produces 32 bit alignment, yet we need
+	   to access it using 64 bit load/store as well. */
+	unsigned long long alignment_dummy;
+};
+
+struct thread_struct {
+	unsigned long sp;
+	unsigned long pc;
+	/* This stores the address of the pt_regs built during a context
+	   switch, or of the register save area built for a kernel mode
+	   exception.  It is used for backtracing the stack of a sleeping task
+	   or one that traps in kernel mode. */
+        struct pt_regs *kregs;
+	/* This stores the address of the pt_regs constructed on entry from
+	   user mode.  It is a fixed value over the lifetime of a process, or
+	   NULL for a kernel thread. */
+	struct pt_regs *uregs;
+
+	unsigned long trap_no, error_code;
+	unsigned long address;
+	/* Hardware debugging registers may come here */
+
+	/* floating point info */
+	union sh_fpu_union fpu;
+};
+
+#define INIT_MMAP \
+{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL }
+
+extern  struct pt_regs fake_swapper_regs;
+
+#define INIT_THREAD  {				\
+	.sp		= sizeof(init_stack) +	\
+			  (long) &init_stack,	\
+	.pc		= 0,			\
+        .kregs		= &fake_swapper_regs,	\
+	.uregs	        = NULL,			\
+	.trap_no	= 0,			\
+	.error_code	= 0,			\
+	.address	= 0,			\
+	.fpu		= { { { 0, } }, }	\
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+#define SR_USER (SR_MMU | SR_FD)
+
+#define start_thread(regs, new_pc, new_sp)			\
+	set_fs(USER_DS);					\
+	regs->sr = SR_USER;	/* User mode. */		\
+	regs->pc = new_pc - 4;	/* Compensate syscall exit */	\
+	regs->pc |= 1;		/* Set SHmedia ! */		\
+	regs->regs[18] = 0;					\
+	regs->regs[15] = new_sp
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+struct mm_struct;
+
+/* Free all resources held by a thread. */
+extern void release_thread(struct task_struct *);
+/*
+ * create a kernel thread without removing it from tasklists
+ */
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+
+/* Copy and release all segment info associated with a VM */
+#define copy_segments(p, mm)	do { } while (0)
+#define release_segments(mm)	do { } while (0)
+#define forget_segments()	do { } while (0)
+#define prepare_to_copy(tsk)	do { } while (0)
+/*
+ * FPU lazy state save handling.
+ */
+
+static inline void disable_fpu(void)
+{
+	unsigned long long __dummy;
+
+	/* Set FD flag in SR */
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "or	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy)
+			     : "r" (SR_FD));
+}
+
+static inline void enable_fpu(void)
+{
+	unsigned long long __dummy;
+
+	/* Clear out FD flag in SR */
+	__asm__ __volatile__("getcon	" __SR ", %0\n\t"
+			     "and	%0, %1, %0\n\t"
+			     "putcon	%0, " __SR "\n\t"
+			     : "=&r" (__dummy)
+			     : "r" (~SR_FD));
+}
+
+/* Round to nearest, no exceptions on inexact, overflow, underflow,
+   zero-divide, invalid.  Configure option for whether to flush denorms to
+   zero, or except if a denorm is encountered.  */
+#if defined(CONFIG_SH64_FPU_DENORM_FLUSH)
+#define FPSCR_INIT  0x00040000
+#else
+#define FPSCR_INIT  0x00000000
+#endif
+
+#ifdef CONFIG_SH_FPU
+/* Initialise the FP state of a task */
+void fpinit(struct sh_fpu_hard_struct *fpregs);
+#else
+#define fpinit(fpregs)	do { } while (0)
+#endif
+
+extern struct task_struct *last_task_used_math;
+
+/*
+ * Return saved PC of a blocked thread.
+ */
+#define thread_saved_pc(tsk)	(tsk->thread.pc)
+
+extern unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)  ((tsk)->thread.pc)
+#define KSTK_ESP(tsk)  ((tsk)->thread.sp)
+
+#define cpu_relax()	barrier()
+
+#endif	/* __ASSEMBLY__ */
+#endif /* __ASM_SH_PROCESSOR_64_H */
diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h
new file mode 100644
index 000000000000..b86aeabba61a
--- /dev/null
+++ b/arch/sh/include/asm/ptrace.h
@@ -0,0 +1,139 @@
+#ifndef __ASM_SH_PTRACE_H
+#define __ASM_SH_PTRACE_H
+
+/*
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ *
+ */
+#if defined(__SH5__)
+struct pt_regs {
+	unsigned long long pc;
+	unsigned long long sr;
+	unsigned long long syscall_nr;
+	unsigned long long regs[63];
+	unsigned long long tregs[8];
+	unsigned long long pad[2];
+};
+#else
+/*
+ * GCC defines register number like this:
+ * -----------------------------
+ *	 0 - 15 are integer registers
+ *	17 - 22 are control/special registers
+ *	24 - 39 fp registers
+ *	40 - 47 xd registers
+ *	48 -    fpscr register
+ * -----------------------------
+ *
+ * We follows above, except:
+ *	16 --- program counter (PC)
+ *	22 --- syscall #
+ *	23 --- floating point communication register
+ */
+#define REG_REG0	 0
+#define REG_REG15	15
+
+#define REG_PC		16
+
+#define REG_PR		17
+#define REG_SR		18
+#define REG_GBR		19
+#define REG_MACH	20
+#define REG_MACL	21
+
+#define REG_SYSCALL	22
+
+#define REG_FPREG0	23
+#define REG_FPREG15	38
+#define REG_XFREG0	39
+#define REG_XFREG15	54
+
+#define REG_FPSCR	55
+#define REG_FPUL	56
+
+/*
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_regs {
+	unsigned long regs[16];
+	unsigned long pc;
+	unsigned long pr;
+	unsigned long sr;
+	unsigned long gbr;
+	unsigned long mach;
+	unsigned long macl;
+	long tra;
+};
+
+/*
+ * This struct defines the way the DSP registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_dspregs {
+	unsigned long	a1;
+	unsigned long	a0g;
+	unsigned long	a1g;
+	unsigned long	m0;
+	unsigned long	m1;
+	unsigned long	a0;
+	unsigned long	x0;
+	unsigned long	x1;
+	unsigned long	y0;
+	unsigned long	y1;
+	unsigned long	dsr;
+	unsigned long	rs;
+	unsigned long	re;
+	unsigned long	mod;
+};
+
+#define PTRACE_GETFDPIC		31	/* get the ELF fdpic loadmap address */
+
+#define PTRACE_GETFDPIC_EXEC	0	/* [addr] request the executable loadmap */
+#define PTRACE_GETFDPIC_INTERP	1	/* [addr] request the interpreter loadmap */
+
+#define	PTRACE_GETDSPREGS	55
+#define	PTRACE_SETDSPREGS	56
+#endif
+
+#ifdef __KERNEL__
+#include <asm/addrspace.h>
+
+#define user_mode(regs)			(((regs)->sr & 0x40000000)==0)
+#define instruction_pointer(regs)	((unsigned long)(regs)->pc)
+
+extern void show_regs(struct pt_regs *);
+
+/*
+ * These are defined as per linux/ptrace.h.
+ */
+struct task_struct;
+
+#define arch_has_single_step()	(1)
+extern void user_enable_single_step(struct task_struct *);
+extern void user_disable_single_step(struct task_struct *);
+
+#ifdef CONFIG_SH_DSP
+#define task_pt_regs(task) \
+	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
+		 - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1)
+#else
+#define task_pt_regs(task) \
+	((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \
+		 - sizeof(unsigned long)) - 1)
+#endif
+
+static inline unsigned long profile_pc(struct pt_regs *regs)
+{
+	unsigned long pc = instruction_pointer(regs);
+
+#ifdef P2SEG
+	if (pc >= P2SEG && pc < P3SEG)
+		pc -= 0x20000000;
+#endif
+
+	return pc;
+}
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_PTRACE_H */
diff --git a/arch/sh/include/asm/push-switch.h b/arch/sh/include/asm/push-switch.h
new file mode 100644
index 000000000000..4903f9e52dd8
--- /dev/null
+++ b/arch/sh/include/asm/push-switch.h
@@ -0,0 +1,31 @@
+#ifndef __ASM_SH_PUSH_SWITCH_H
+#define __ASM_SH_PUSH_SWITCH_H
+
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+
+struct push_switch {
+	/* switch state */
+	unsigned int		state:1;
+	/* debounce timer */
+	struct timer_list	debounce;
+	/* workqueue */
+	struct work_struct	work;
+	/* platform device, for workqueue handler */
+	struct platform_device	*pdev;
+};
+
+struct push_switch_platform_info {
+	/* IRQ handler */
+	irqreturn_t		(*irq_handler)(int irq, void *data);
+	/* Special IRQ flags */
+	unsigned int		irq_flags;
+	/* Bit location of switch */
+	unsigned int		bit;
+	/* Symbolic switch name */
+	const char		*name;
+};
+
+#endif /* __ASM_SH_PUSH_SWITCH_H */
diff --git a/arch/sh/include/asm/r7780rp.h b/arch/sh/include/asm/r7780rp.h
new file mode 100644
index 000000000000..306f7359f7d4
--- /dev/null
+++ b/arch/sh/include/asm/r7780rp.h
@@ -0,0 +1,198 @@
+#ifndef __ASM_SH_RENESAS_R7780RP_H
+#define __ASM_SH_RENESAS_R7780RP_H
+
+/* Box specific addresses.  */
+#if defined(CONFIG_SH_R7780MP)
+#define PA_BCR          0xa4000000      /* FPGA */
+#define PA_SDPOW	(-1)
+
+#define PA_IRLMSK       (PA_BCR+0x0000) /* Interrupt Mask control */
+#define PA_IRLMON       (PA_BCR+0x0002) /* Interrupt Status control */
+#define PA_IRLPRI1      (PA_BCR+0x0004) /* Interrupt Priorty 1 */
+#define PA_IRLPRI2      (PA_BCR+0x0006) /* Interrupt Priorty 2 */
+#define PA_IRLPRI3      (PA_BCR+0x0008) /* Interrupt Priorty 3 */
+#define PA_IRLPRI4      (PA_BCR+0x000a) /* Interrupt Priorty 4 */
+#define PA_RSTCTL       (PA_BCR+0x000c) /* Reset Control */
+#define PA_PCIBD        (PA_BCR+0x000e) /* PCI Board detect control */
+#define PA_PCICD        (PA_BCR+0x0010) /* PCI Conector detect control */
+#define PA_EXTGIO       (PA_BCR+0x0016) /* Extension GPIO Control */
+#define PA_IVDRMON      (PA_BCR+0x0018) /* iVDR Moniter control */
+#define PA_IVDRCTL      (PA_BCR+0x001a) /* iVDR control */
+#define PA_OBLED        (PA_BCR+0x001c) /* On Board LED control */
+#define PA_OBSW         (PA_BCR+0x001e) /* On Board Switch control */
+#define PA_AUDIOSEL     (PA_BCR+0x0020) /* Sound Interface Select control */
+#define PA_EXTPLR       (PA_BCR+0x001e) /* Extention Pin Polarity control */
+#define PA_TPCTL        (PA_BCR+0x0100) /* Touch Panel Access control */
+#define PA_TPDCKCTL     (PA_BCR+0x0102) /* Touch Panel Access data control */
+#define PA_TPCTLCLR     (PA_BCR+0x0104) /* Touch Panel Access control */
+#define PA_TPXPOS       (PA_BCR+0x0106) /* Touch Panel X position control */
+#define PA_TPYPOS       (PA_BCR+0x0108) /* Touch Panel Y position control */
+#define PA_DBSW         (PA_BCR+0x0200) /* Debug Board Switch control */
+#define PA_CFCTL        (PA_BCR+0x0300) /* CF Timing control */
+#define PA_CFPOW        (PA_BCR+0x0302) /* CF Power control */
+#define PA_CFCDINTCLR   (PA_BCR+0x0304) /* CF Insert Interrupt clear */
+#define PA_SCSMR0       (PA_BCR+0x0400) /* SCIF0 Serial mode control */
+#define PA_SCBRR0       (PA_BCR+0x0404) /* SCIF0 Bit rate control */
+#define PA_SCSCR0       (PA_BCR+0x0408) /* SCIF0 Serial control */
+#define PA_SCFTDR0      (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
+#define PA_SCFSR0       (PA_BCR+0x0410) /* SCIF0 Serial status control */
+#define PA_SCFRDR0      (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
+#define PA_SCFCR0       (PA_BCR+0x0418) /* SCIF0 FIFO control */
+#define PA_SCTFDR0      (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
+#define PA_SCRFDR0      (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
+#define PA_SCSPTR0      (PA_BCR+0x0424) /* SCIF0 Serial Port control */
+#define PA_SCLSR0       (PA_BCR+0x0428) /* SCIF0 Line Status control */
+#define PA_SCRER0       (PA_BCR+0x042c) /* SCIF0 Serial Error control */
+#define PA_SCSMR1       (PA_BCR+0x0500) /* SCIF1 Serial mode control */
+#define PA_SCBRR1       (PA_BCR+0x0504) /* SCIF1 Bit rate control */
+#define PA_SCSCR1       (PA_BCR+0x0508) /* SCIF1 Serial control */
+#define PA_SCFTDR1      (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
+#define PA_SCFSR1       (PA_BCR+0x0510) /* SCIF1 Serial status control */
+#define PA_SCFRDR1      (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
+#define PA_SCFCR1       (PA_BCR+0x0518) /* SCIF1 FIFO control */
+#define PA_SCTFDR1      (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
+#define PA_SCRFDR1      (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
+#define PA_SCSPTR1      (PA_BCR+0x0524) /* SCIF1 Serial Port control */
+#define PA_SCLSR1       (PA_BCR+0x0528) /* SCIF1 Line Status control */
+#define PA_SCRER1       (PA_BCR+0x052c) /* SCIF1 Serial Error control */
+#define PA_SMCR         (PA_BCR+0x0600) /* 2-wire Serial control */
+#define PA_SMSMADR      (PA_BCR+0x0602) /* 2-wire Serial Slave control */
+#define PA_SMMR         (PA_BCR+0x0604) /* 2-wire Serial Mode control */
+#define PA_SMSADR1      (PA_BCR+0x0606) /* 2-wire Serial Address1 control */
+#define PA_SMTRDR1      (PA_BCR+0x0646) /* 2-wire Serial Data1 control */
+#define PA_VERREG       (PA_BCR+0x0700) /* FPGA Version Register */
+#define PA_POFF         (PA_BCR+0x0800) /* System Power Off control */
+#define PA_PMR          (PA_BCR+0x0900) /*  */
+
+#define IRLCNTR1        (PA_BCR + 0)    /* Interrupt Control Register1 */
+#define IVDR_CK_ON	8		/* iVDR Clock ON */
+
+#elif defined(CONFIG_SH_R7780RP)
+#define PA_POFF		(-1)
+
+#define PA_BCR		0xa5000000	/* FPGA */
+#define	PA_IRLMSK	(PA_BCR+0x0000)	/* Interrupt Mask control */
+#define PA_IRLMON	(PA_BCR+0x0002)	/* Interrupt Status control */
+#define	PA_SDPOW	(PA_BCR+0x0004)	/* SD Power control */
+#define	PA_RSTCTL	(PA_BCR+0x0006)	/* Device Reset control */
+#define	PA_PCIBD	(PA_BCR+0x0008)	/* PCI Board detect control */
+#define	PA_PCICD	(PA_BCR+0x000a)	/* PCI Conector detect control */
+#define	PA_ZIGIO1	(PA_BCR+0x000c)	/* Zigbee IO control 1 */
+#define	PA_ZIGIO2	(PA_BCR+0x000e)	/* Zigbee IO control 2 */
+#define	PA_ZIGIO3	(PA_BCR+0x0010)	/* Zigbee IO control 3 */
+#define	PA_ZIGIO4	(PA_BCR+0x0012)	/* Zigbee IO control 4 */
+#define	PA_IVDRMON	(PA_BCR+0x0014)	/* iVDR Moniter control */
+#define	PA_IVDRCTL	(PA_BCR+0x0016)	/* iVDR control */
+#define PA_OBLED	(PA_BCR+0x0018)	/* On Board LED control */
+#define PA_OBSW		(PA_BCR+0x001a)	/* On Board Switch control */
+#define PA_AUDIOSEL	(PA_BCR+0x001c)	/* Sound Interface Select control */
+#define PA_EXTPLR	(PA_BCR+0x001e)	/* Extention Pin Polarity control */
+#define PA_TPCTL	(PA_BCR+0x0100)	/* Touch Panel Access control */
+#define PA_TPDCKCTL	(PA_BCR+0x0102)	/* Touch Panel Access data control */
+#define PA_TPCTLCLR	(PA_BCR+0x0104)	/* Touch Panel Access control */
+#define PA_TPXPOS	(PA_BCR+0x0106)	/* Touch Panel X position control */
+#define PA_TPYPOS	(PA_BCR+0x0108)	/* Touch Panel Y position control */
+#define PA_DBDET	(PA_BCR+0x0200)	/* Debug Board detect control */
+#define PA_DBDISPCTL	(PA_BCR+0x0202)	/* Debug Board Dot timing control */
+#define PA_DBSW		(PA_BCR+0x0204)	/* Debug Board Switch control */
+#define PA_CFCTL	(PA_BCR+0x0300)	/* CF Timing control */
+#define PA_CFPOW	(PA_BCR+0x0302)	/* CF Power control */
+#define PA_CFCDINTCLR	(PA_BCR+0x0304)	/* CF Insert Interrupt clear */
+#define PA_SCSMR	(PA_BCR+0x0400)	/* SCIF Serial mode control */
+#define PA_SCBRR	(PA_BCR+0x0402)	/* SCIF Bit rate control */
+#define PA_SCSCR	(PA_BCR+0x0404)	/* SCIF Serial control */
+#define PA_SCFDTR	(PA_BCR+0x0406)	/* SCIF Send FIFO control */
+#define PA_SCFSR	(PA_BCR+0x0408)	/* SCIF Serial status control */
+#define PA_SCFRDR	(PA_BCR+0x040a)	/* SCIF Receive FIFO control */
+#define PA_SCFCR	(PA_BCR+0x040c)	/* SCIF FIFO control */
+#define PA_SCFDR	(PA_BCR+0x040e)	/* SCIF FIFO data control */
+#define PA_SCLSR	(PA_BCR+0x0412)	/* SCIF Line Status control */
+#define PA_SMCR		(PA_BCR+0x0500)	/* 2-wire Serial control */
+#define PA_SMSMADR	(PA_BCR+0x0502)	/* 2-wire Serial Slave control */
+#define PA_SMMR		(PA_BCR+0x0504)	/* 2-wire Serial Mode control */
+#define PA_SMSADR1	(PA_BCR+0x0506)	/* 2-wire Serial Address1 control */
+#define PA_SMTRDR1	(PA_BCR+0x0546)	/* 2-wire Serial Data1 control */
+#define PA_VERREG	(PA_BCR+0x0600)	/* FPGA Version Register */
+
+#define PA_AX88796L	0xa5800400	/* AX88796L Area */
+#define PA_SC1602BSLB	0xa6000000	/* SC1602BSLB Area */
+#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
+#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
+
+#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
+
+#define IVDR_CK_ON	8		/* iVDR Clock ON */
+
+#elif defined(CONFIG_SH_R7785RP)
+#define PA_BCR		0xa4000000	/* FPGA */
+#define PA_SDPOW	(-1)
+
+#define	PA_PCISCR	(PA_BCR+0x0000)
+#define PA_IRLPRA	(PA_BCR+0x0002)
+#define	PA_IRLPRB	(PA_BCR+0x0004)
+#define	PA_IRLPRC	(PA_BCR+0x0006)
+#define	PA_IRLPRD	(PA_BCR+0x0008)
+#define IRLCNTR1	(PA_BCR+0x0010)
+#define	PA_IRLPRE	(PA_BCR+0x000a)
+#define	PA_IRLPRF	(PA_BCR+0x000c)
+#define	PA_EXIRLCR	(PA_BCR+0x000e)
+#define	PA_IRLMCR1	(PA_BCR+0x0010)
+#define	PA_IRLMCR2	(PA_BCR+0x0012)
+#define	PA_IRLSSR1	(PA_BCR+0x0014)
+#define	PA_IRLSSR2	(PA_BCR+0x0016)
+#define PA_CFTCR	(PA_BCR+0x0100)
+#define PA_CFPCR	(PA_BCR+0x0102)
+#define PA_PCICR	(PA_BCR+0x0110)
+#define PA_IVDRCTL	(PA_BCR+0x0112)
+#define PA_IVDRSR	(PA_BCR+0x0114)
+#define PA_PDRSTCR	(PA_BCR+0x0116)
+#define PA_POFF		(PA_BCR+0x0120)
+#define PA_LCDCR	(PA_BCR+0x0130)
+#define PA_TPCR		(PA_BCR+0x0140)
+#define PA_TPCKCR	(PA_BCR+0x0142)
+#define PA_TPRSTR	(PA_BCR+0x0144)
+#define PA_TPXPDR	(PA_BCR+0x0146)
+#define PA_TPYPDR	(PA_BCR+0x0148)
+#define PA_GPIOPFR	(PA_BCR+0x0150)
+#define PA_GPIODR	(PA_BCR+0x0152)
+#define PA_OBLED	(PA_BCR+0x0154)
+#define PA_SWSR		(PA_BCR+0x0156)
+#define PA_VERREG	(PA_BCR+0x0158)
+#define PA_SMCR		(PA_BCR+0x0200)
+#define PA_SMSMADR	(PA_BCR+0x0202)
+#define PA_SMMR		(PA_BCR+0x0204)
+#define PA_SMSADR1	(PA_BCR+0x0206)
+#define PA_SMSADR32	(PA_BCR+0x0244)
+#define PA_SMTRDR1	(PA_BCR+0x0246)
+#define PA_SMTRDR16	(PA_BCR+0x0264)
+#define PA_CU3MDR	(PA_BCR+0x0300)
+#define PA_CU5MDR	(PA_BCR+0x0302)
+#define PA_MMSR		(PA_BCR+0x0400)
+
+#define IVDR_CK_ON	4		/* iVDR Clock ON */
+#endif
+
+#define HL_FPGA_IRQ_BASE	200
+#define HL_NR_IRL		15
+
+#define IRQ_AX88796		(HL_FPGA_IRQ_BASE + 0)
+#define IRQ_CF			(HL_FPGA_IRQ_BASE + 1)
+#define IRQ_PSW			(HL_FPGA_IRQ_BASE + 2)
+#define IRQ_EXT0		(HL_FPGA_IRQ_BASE + 3)
+#define IRQ_EXT1		(HL_FPGA_IRQ_BASE + 4)
+#define IRQ_EXT2		(HL_FPGA_IRQ_BASE + 5)
+#define IRQ_EXT3		(HL_FPGA_IRQ_BASE + 6)
+#define IRQ_EXT4		(HL_FPGA_IRQ_BASE + 7)
+#define IRQ_EXT5		(HL_FPGA_IRQ_BASE + 8)
+#define IRQ_EXT6		(HL_FPGA_IRQ_BASE + 9)
+#define IRQ_EXT7		(HL_FPGA_IRQ_BASE + 10)
+#define IRQ_SMBUS		(HL_FPGA_IRQ_BASE + 11)
+#define IRQ_TP			(HL_FPGA_IRQ_BASE + 12)
+#define IRQ_RTC			(HL_FPGA_IRQ_BASE + 13)
+#define IRQ_TH_ALERT		(HL_FPGA_IRQ_BASE + 14)
+#define IRQ_SCIF0		(HL_FPGA_IRQ_BASE + 15)
+#define IRQ_SCIF1		(HL_FPGA_IRQ_BASE + 16)
+
+unsigned char *highlander_plat_irq_setup(void);
+
+#endif  /* __ASM_SH_RENESAS_R7780RP */
diff --git a/arch/sh/include/asm/resource.h b/arch/sh/include/asm/resource.h
new file mode 100644
index 000000000000..9c2499a86ec0
--- /dev/null
+++ b/arch/sh/include/asm/resource.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_RESOURCE_H
+#define __ASM_SH_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* __ASM_SH_RESOURCE_H */
diff --git a/arch/sh/include/asm/rtc.h b/arch/sh/include/asm/rtc.h
new file mode 100644
index 000000000000..1813f4202a24
--- /dev/null
+++ b/arch/sh/include/asm/rtc.h
@@ -0,0 +1,16 @@
+#ifndef _ASM_RTC_H
+#define _ASM_RTC_H
+
+extern void (*board_time_init)(void);
+extern void (*rtc_sh_get_time)(struct timespec *);
+extern int (*rtc_sh_set_time)(const time_t);
+
+#define RTC_CAP_4_DIGIT_YEAR	(1 << 0)
+
+struct sh_rtc_platform_info {
+	unsigned long capabilities;
+};
+
+#include <cpu/rtc.h>
+
+#endif /* _ASM_RTC_H */
diff --git a/arch/sh/include/asm/rts7751r2d.h b/arch/sh/include/asm/rts7751r2d.h
new file mode 100644
index 000000000000..0a800157b826
--- /dev/null
+++ b/arch/sh/include/asm/rts7751r2d.h
@@ -0,0 +1,70 @@
+#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
+#define __ASM_SH_RENESAS_RTS7751R2D_H
+
+/*
+ * linux/include/asm-sh/renesas_rts7751r2d.h
+ *
+ * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
+ *
+ * Renesas Technology Sales RTS7751R2D support
+ */
+
+/* Board specific addresses.  */
+
+#define PA_BCR		0xa4000000	/* FPGA */
+#define PA_IRLMON	0xa4000002	/* Interrupt Status control */
+#define PA_CFCTL	0xa4000004	/* CF Timing control */
+#define PA_CFPOW	0xa4000006	/* CF Power control */
+#define PA_DISPCTL	0xa4000008	/* Display Timing control */
+#define PA_SDMPOW	0xa400000a	/* SD Power control */
+#define PA_RTCCE	0xa400000c	/* RTC(9701) Enable control */
+#define PA_PCICD	0xa400000e	/* PCI Extention detect control */
+#define PA_VOYAGERRTS	0xa4000020	/* VOYAGER Reset control */
+
+#define PA_R2D1_AXRST		0xa4000022	/* AX_LAN Reset control */
+#define PA_R2D1_CFRST		0xa4000024	/* CF Reset control */
+#define PA_R2D1_ADMRTS		0xa4000026	/* SD Reset control */
+#define PA_R2D1_EXTRST		0xa4000028	/* Extention Reset control */
+#define PA_R2D1_CFCDINTCLR	0xa400002a	/* CF Insert Interrupt clear */
+
+#define PA_R2DPLUS_CFRST	0xa4000022	/* CF Reset control */
+#define PA_R2DPLUS_ADMRTS	0xa4000024	/* SD Reset control */
+#define PA_R2DPLUS_EXTRST	0xa4000026	/* Extention Reset control */
+#define PA_R2DPLUS_CFCDINTCLR	0xa4000028	/* CF Insert Interrupt clear */
+#define PA_R2DPLUS_KEYCTLCLR	0xa400002a	/* Key Interrupt clear */
+
+#define PA_POWOFF	0xa4000030	/* Board Power OFF control */
+#define PA_VERREG	0xa4000032	/* FPGA Version Register */
+#define PA_INPORT	0xa4000034	/* KEY Input Port control */
+#define PA_OUTPORT	0xa4000036	/* LED control */
+#define PA_BVERREG	0xa4000038	/* Board Revision Register */
+
+#define PA_AX88796L	0xaa000400	/* AX88796L Area */
+#define PA_VOYAGER	0xab000000	/* VOYAGER GX Area */
+#define PA_IDE_OFFSET	0x1f0		/* CF IDE Offset */
+#define AX88796L_IO_BASE	0x1000	/* AX88796L IO Base Address */
+
+#define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
+
+#define R2D_FPGA_IRQ_BASE	100
+
+#define IRQ_VOYAGER		(R2D_FPGA_IRQ_BASE + 0)
+#define IRQ_EXT			(R2D_FPGA_IRQ_BASE + 1)
+#define IRQ_TP			(R2D_FPGA_IRQ_BASE + 2)
+#define IRQ_RTC_T		(R2D_FPGA_IRQ_BASE + 3)
+#define IRQ_RTC_A		(R2D_FPGA_IRQ_BASE + 4)
+#define IRQ_SDCARD		(R2D_FPGA_IRQ_BASE + 5)
+#define IRQ_CF_CD		(R2D_FPGA_IRQ_BASE + 6)
+#define IRQ_CF_IDE		(R2D_FPGA_IRQ_BASE + 7)
+#define IRQ_AX88796		(R2D_FPGA_IRQ_BASE + 8)
+#define IRQ_KEY			(R2D_FPGA_IRQ_BASE + 9)
+#define IRQ_PCI_INTA		(R2D_FPGA_IRQ_BASE + 10)
+#define IRQ_PCI_INTB		(R2D_FPGA_IRQ_BASE + 11)
+#define IRQ_PCI_INTC		(R2D_FPGA_IRQ_BASE + 12)
+#define IRQ_PCI_INTD		(R2D_FPGA_IRQ_BASE + 13)
+
+/* arch/sh/boards/renesas/rts7751r2d/irq.c */
+void init_rts7751r2d_IRQ(void);
+int rts7751r2d_irq_demux(int);
+
+#endif  /* __ASM_SH_RENESAS_RTS7751R2D */
diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h
new file mode 100644
index 000000000000..1987f3ea7f1b
--- /dev/null
+++ b/arch/sh/include/asm/rwsem.h
@@ -0,0 +1,188 @@
+/*
+ * include/asm-sh/rwsem.h: R/W semaphores for SH using the stuff
+ * in lib/rwsem.c.
+ */
+
+#ifndef _ASM_SH_RWSEM_H
+#define _ASM_SH_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+#include <asm/system.h>
+
+/*
+ * the semaphore definition
+ */
+struct rw_semaphore {
+	long		count;
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		(-0x00010000)
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	dep_map;
+#endif
+};
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+	  LIST_HEAD_INIT((name).wait_list) \
+	  __RWSEM_DEP_MAP_INIT(name) }
+
+#define DECLARE_RWSEM(name)		\
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
+extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
+
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+			 struct lock_class_key *key);
+
+#define init_rwsem(sem)				\
+do {						\
+	static struct lock_class_key __key;	\
+						\
+	__init_rwsem((sem), #sem, &__key);	\
+} while (0)
+
+static inline void init_rwsem(struct rw_semaphore *sem)
+{
+	sem->count = RWSEM_UNLOCKED_VALUE;
+	spin_lock_init(&sem->wait_lock);
+	INIT_LIST_HEAD(&sem->wait_list);
+}
+
+/*
+ * lock for reading
+ */
+static inline void __down_read(struct rw_semaphore *sem)
+{
+	if (atomic_inc_return((atomic_t *)(&sem->count)) > 0)
+		smp_wmb();
+	else
+		rwsem_down_read_failed(sem);
+}
+
+static inline int __down_read_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	while ((tmp = sem->count) >= 0) {
+		if (tmp == cmpxchg(&sem->count, tmp,
+				   tmp + RWSEM_ACTIVE_READ_BIAS)) {
+			smp_wmb();
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/*
+ * lock for writing
+ */
+static inline void __down_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS,
+				(atomic_t *)(&sem->count));
+	if (tmp == RWSEM_ACTIVE_WRITE_BIAS)
+		smp_wmb();
+	else
+		rwsem_down_write_failed(sem);
+}
+
+static inline int __down_write_trylock(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE,
+		      RWSEM_ACTIVE_WRITE_BIAS);
+	smp_wmb();
+	return tmp == RWSEM_UNLOCKED_VALUE;
+}
+
+/*
+ * unlock after reading
+ */
+static inline void __up_read(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	smp_wmb();
+	tmp = atomic_dec_return((atomic_t *)(&sem->count));
+	if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * unlock after writing
+ */
+static inline void __up_write(struct rw_semaphore *sem)
+{
+	smp_wmb();
+	if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS,
+			      (atomic_t *)(&sem->count)) < 0)
+		rwsem_wake(sem);
+}
+
+/*
+ * implement atomic add functionality
+ */
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	atomic_add(delta, (atomic_t *)(&sem->count));
+}
+
+/*
+ * downgrade write lock to read lock
+ */
+static inline void __downgrade_write(struct rw_semaphore *sem)
+{
+	int tmp;
+
+	smp_wmb();
+	tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count));
+	if (tmp < 0)
+		rwsem_downgrade_wake(sem);
+}
+
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+	__down_write(sem);
+}
+
+/*
+ * implement exchange and add functionality
+ */
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	smp_mb();
+	return atomic_add_return(delta, (atomic_t *)(&sem->count));
+}
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_SH_RWSEM_H */
diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h
new file mode 100644
index 000000000000..2084d0373693
--- /dev/null
+++ b/arch/sh/include/asm/scatterlist.h
@@ -0,0 +1,27 @@
+#ifndef __ASM_SH_SCATTERLIST_H
+#define __ASM_SH_SCATTERLIST_H
+
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+    unsigned long sg_magic;
+#endif
+    unsigned long page_link;
+    unsigned int offset;/* for highmem, page offset */
+    dma_addr_t dma_address;
+    unsigned int length;
+};
+
+#define ISA_DMA_THRESHOLD	PHYS_ADDR_MASK
+
+/* These macros should be used after a pci_map_sg call has been done
+ * to get bus addresses of each of the SG entries and their lengths.
+ * You should only work with the number of sg entries pci_map_sg
+ * returns, or alternatively stop on the first sg_dma_len(sg) which
+ * is 0.
+ */
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)		((sg)->length)
+
+#endif /* !(__ASM_SH_SCATTERLIST_H) */
diff --git a/arch/sh/include/asm/sdk7780.h b/arch/sh/include/asm/sdk7780.h
new file mode 100644
index 000000000000..697dc865f21b
--- /dev/null
+++ b/arch/sh/include/asm/sdk7780.h
@@ -0,0 +1,81 @@
+#ifndef __ASM_SH_RENESAS_SDK7780_H
+#define __ASM_SH_RENESAS_SDK7780_H
+
+/*
+ * linux/include/asm-sh/sdk7780.h
+ *
+ * Renesas Solutions SH7780 SDK Support
+ * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <asm/addrspace.h>
+
+/* Box specific addresses.  */
+#define SE_AREA0_WIDTH	4		/* Area0: 32bit */
+#define PA_ROM			0xa0000000	/* EPROM */
+#define PA_ROM_SIZE		0x00400000	/* EPROM size 4M byte */
+#define PA_FROM			0xa0800000	/* Flash-ROM */
+#define PA_FROM_SIZE	0x00400000	/* Flash-ROM size 4M byte */
+#define PA_EXT1			0xa4000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_SDRAM		0xa8000000	/* DDR-SDRAM(Area2/3) 128MB */
+#define PA_SDRAM_SIZE	0x08000000
+
+#define PA_EXT4			0xb0000000
+#define PA_EXT4_SIZE	0x04000000
+#define PA_EXT_USER		PA_EXT4		/* User Expansion Space */
+
+#define PA_PERIPHERAL	PA_AREA5_IO
+
+/* SRAM/Reserved */
+#define PA_RESERVED	(PA_PERIPHERAL + 0)
+/* FPGA base address */
+#define PA_FPGA		(PA_PERIPHERAL + 0x01000000)
+/* SMC LAN91C111 */
+#define PA_LAN		(PA_PERIPHERAL + 0x01800000)
+
+
+#define FPGA_SRSTR      (PA_FPGA + 0x000)	/* System reset */
+#define FPGA_IRQ0SR     (PA_FPGA + 0x010)	/* IRQ0 status */
+#define FPGA_IRQ0MR     (PA_FPGA + 0x020)	/* IRQ0 mask */
+#define FPGA_BDMR       (PA_FPGA + 0x030)	/* Board operating mode */
+#define FPGA_INTT0PRTR  (PA_FPGA + 0x040)	/* Interrupt test mode0 port */
+#define FPGA_INTT0SELR  (PA_FPGA + 0x050)	/* Int. test mode0 select */
+#define FPGA_INTT1POLR  (PA_FPGA + 0x060)	/* Int. test mode0 polarity */
+#define FPGA_NMIR       (PA_FPGA + 0x070)	/* NMI source */
+#define FPGA_NMIMR      (PA_FPGA + 0x080)	/* NMI mask */
+#define FPGA_IRQR       (PA_FPGA + 0x090)	/* IRQX source */
+#define FPGA_IRQMR      (PA_FPGA + 0x0A0)	/* IRQX mask */
+#define FPGA_SLEDR      (PA_FPGA + 0x0B0)	/* LED control */
+#define PA_LED			FPGA_SLEDR
+#define FPGA_MAPSWR     (PA_FPGA + 0x0C0)	/* Map switch */
+#define FPGA_FPVERR     (PA_FPGA + 0x0D0)	/* FPGA version */
+#define FPGA_FPDATER    (PA_FPGA + 0x0E0)	/* FPGA date */
+#define FPGA_RSE        (PA_FPGA + 0x100)	/* Reset source */
+#define FPGA_EASR       (PA_FPGA + 0x110)	/* External area select */
+#define FPGA_SPER       (PA_FPGA + 0x120)	/* Serial port enable */
+#define FPGA_IMSR       (PA_FPGA + 0x130)	/* Interrupt mode select */
+#define FPGA_PCIMR      (PA_FPGA + 0x140)	/* PCI Mode */
+#define FPGA_DIPSWMR    (PA_FPGA + 0x150)	/* DIPSW monitor */
+#define FPGA_FPODR      (PA_FPGA + 0x160)	/* Output port data */
+#define FPGA_ATAESR     (PA_FPGA + 0x170)	/* ATA extended bus status */
+#define FPGA_IRQPOLR    (PA_FPGA + 0x180)	/* IRQx polarity */
+
+
+#define SDK7780_NR_IRL			15
+/* IDE/ATA interrupt */
+#define IRQ_CFCARD				14
+/* SMC interrupt */
+#define IRQ_ETHERNET			6
+
+
+/* arch/sh/boards/renesas/sdk7780/irq.c */
+void init_sdk7780_IRQ(void);
+
+#define __IO_PREFIX		sdk7780
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_RENESAS_SDK7780_H */
diff --git a/arch/sh/include/asm/seccomp.h b/arch/sh/include/asm/seccomp.h
new file mode 100644
index 000000000000..3280ed3802ef
--- /dev/null
+++ b/arch/sh/include/asm/seccomp.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_SECCOMP_H
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#endif /* __ASM_SECCOMP_H */
diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h
new file mode 100644
index 000000000000..8f8f4ad400df
--- /dev/null
+++ b/arch/sh/include/asm/sections.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_SH_SECTIONS_H
+#define __ASM_SH_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+extern long __machvec_start, __machvec_end;
+extern char __uncached_start, __uncached_end;
+extern char _ebss[];
+
+#endif /* __ASM_SH_SECTIONS_H */
+
diff --git a/arch/sh/include/asm/segment.h b/arch/sh/include/asm/segment.h
new file mode 100644
index 000000000000..5e2725f4ac49
--- /dev/null
+++ b/arch/sh/include/asm/segment.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_SH_SEGMENT_H
+#define __ASM_SH_SEGMENT_H
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s)	((mm_segment_t) { (s) })
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not.  If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+#define KERNEL_DS	MAKE_MM_SEG(0xFFFFFFFFUL)
+#ifdef CONFIG_MMU
+#define USER_DS		MAKE_MM_SEG(PAGE_OFFSET)
+#else
+#define USER_DS		KERNEL_DS
+#endif
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+#define get_ds()	(KERNEL_DS)
+
+#define get_fs()	(current_thread_info()->addr_limit)
+#define set_fs(x)	(current_thread_info()->addr_limit = (x))
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_SEGMENT_H */
diff --git a/arch/sh/include/asm/sembuf.h b/arch/sh/include/asm/sembuf.h
new file mode 100644
index 000000000000..d79f3bd570b2
--- /dev/null
+++ b/arch/sh/include/asm/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef __ASM_SH_SEMBUF_H
+#define __ASM_SH_SEMBUF_H
+
+/* 
+ * The semid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __ASM_SH_SEMBUF_H */
diff --git a/arch/sh/include/asm/serial.h b/arch/sh/include/asm/serial.h
new file mode 100644
index 000000000000..e13cc948ee60
--- /dev/null
+++ b/arch/sh/include/asm/serial.h
@@ -0,0 +1,36 @@
+/*
+ * include/asm-sh/serial.h
+ *
+ * Configuration details for 8250, 16450, 16550, etc. serial ports
+ */
+
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
+
+#include <linux/kernel.h>
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#ifdef CONFIG_HD64465
+#include <asm/hd64465/hd64465.h>
+
+#define SERIAL_PORT_DFNS                   \
+        /* UART CLK   PORT IRQ     FLAGS        */                      \
+        { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS }  /* ttyS0 */
+
+#else
+
+#define SERIAL_PORT_DFNS
+
+#endif
+
+#endif /* _ASM_SERIAL_H */
diff --git a/arch/sh/include/asm/setup.h b/arch/sh/include/asm/setup.h
new file mode 100644
index 000000000000..55a2bd328d99
--- /dev/null
+++ b/arch/sh/include/asm/setup.h
@@ -0,0 +1,27 @@
+#ifndef _SH_SETUP_H
+#define _SH_SETUP_H
+
+#define COMMAND_LINE_SIZE 256
+
+#ifdef __KERNEL__
+
+/*
+ * This is set up by the setup-routine at boot-time
+ */
+#define PARAM	((unsigned char *)empty_zero_page)
+
+#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000))
+#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004))
+#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008))
+#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c))
+#define INITRD_START (*(unsigned long *) (PARAM+0x010))
+#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014))
+/* ... */
+#define COMMAND_LINE ((char *) (PARAM+0x100))
+
+int setup_early_printk(char *);
+void sh_mv_setup(void);
+
+#endif /* __KERNEL__ */
+
+#endif /* _SH_SETUP_H */
diff --git a/arch/sh/include/asm/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h
new file mode 100644
index 000000000000..d3c548443f2a
--- /dev/null
+++ b/arch/sh/include/asm/sfp-machine.h
@@ -0,0 +1,84 @@
+/* Machine-dependent software floating-point definitions.
+   SuperH kernel version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+
+#define _FP_W_TYPE_SIZE		32
+#define _FP_W_TYPE		unsigned long
+#define _FP_WS_TYPE		signed long
+#define _FP_I_TYPE		long
+
+#define _FP_MUL_MEAT_S(R,X,Y)					\
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_D(R,X,Y)					\
+  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)					\
+  _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_udiv(S,R,X,Y)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_2_udiv(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_4_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1), -1
+#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
+#define _FP_NANSIGN_S		0
+#define _FP_NANSIGN_D		0
+#define _FP_NANSIGN_Q		0
+
+#define _FP_KEEPNANFRACP 1
+
+/*
+ * If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)                      \
+  do {                                                          \
+    if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs)          \
+        && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs))     \
+      {                                                         \
+        R##_s = Y##_s;                                          \
+        _FP_FRAC_COPY_##wc(R,Y);                                \
+      }                                                         \
+    else                                                        \
+      {                                                         \
+        R##_s = X##_s;                                          \
+        _FP_FRAC_COPY_##wc(R,X);                                \
+      }                                                         \
+    R##_c = FP_CLS_NAN;                                         \
+  } while (0)
+
+//#define FP_ROUNDMODE		FPSCR_RM
+#define FP_DENORM_ZERO		1/*FPSCR_DN*/
+
+/* Exception flags. */
+#define FP_EX_INVALID		(1<<4)
+#define FP_EX_DIVZERO		(1<<3)
+#define FP_EX_OVERFLOW		(1<<2)
+#define FP_EX_UNDERFLOW		(1<<1)
+#define FP_EX_INEXACT		(1<<0)
+
+#endif
+
diff --git a/arch/sh/include/asm/sh7760fb.h b/arch/sh/include/asm/sh7760fb.h
new file mode 100644
index 000000000000..8767f61aceca
--- /dev/null
+++ b/arch/sh/include/asm/sh7760fb.h
@@ -0,0 +1,197 @@
+/*
+ * sh7760fb.h -- platform data for SH7760/SH7763 LCDC framebuffer driver.
+ *
+ * (c) 2006-2008 MSC Vertriebsges.m.b.H.,
+ * 			Manuel Lauss <mano@roarinelk.homelinux.net>
+ * (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ */
+
+#ifndef _ASM_SH_SH7760FB_H
+#define _ASM_SH_SH7760FB_H
+
+/*
+ * some bits of the colormap registers should be written as zero.
+ * create a mask for that.
+ */
+#define SH7760FB_PALETTE_MASK 0x00f8fcf8
+
+/* The LCDC dma engine always sets bits 27-26 to 1: this is Area3 */
+#define SH7760FB_DMA_MASK 0x0C000000
+
+/* palette */
+#define LDPR(x) (((x) << 2))
+
+/* framebuffer registers and bits */
+#define LDICKR 0x400
+#define LDMTR 0x402
+/* see sh7760fb.h for LDMTR bits */
+#define LDDFR 0x404
+#define LDDFR_PABD (1 << 8)
+#define LDDFR_COLOR_MASK 0x7F
+#define LDSMR 0x406
+#define LDSMR_ROT (1 << 13)
+#define LDSARU 0x408
+#define LDSARL 0x40c
+#define LDLAOR 0x410
+#define LDPALCR 0x412
+#define LDPALCR_PALS (1 << 4)
+#define LDPALCR_PALEN (1 << 0)
+#define LDHCNR 0x414
+#define LDHSYNR 0x416
+#define LDVDLNR 0x418
+#define LDVTLNR 0x41a
+#define LDVSYNR 0x41c
+#define LDACLNR 0x41e
+#define LDINTR 0x420
+#define LDPMMR 0x424
+#define LDPSPR 0x426
+#define LDCNTR 0x428
+#define LDCNTR_DON (1 << 0)
+#define LDCNTR_DON2 (1 << 4)
+
+#ifdef CONFIG_CPU_SUBTYPE_SH7763
+# define LDLIRNR       0x440
+/* LDINTR bit */
+# define LDINTR_MINTEN (1 << 15)
+# define LDINTR_FINTEN (1 << 14)
+# define LDINTR_VSINTEN (1 << 13)
+# define LDINTR_VEINTEN (1 << 12)
+# define LDINTR_MINTS (1 << 11)
+# define LDINTR_FINTS (1 << 10)
+# define LDINTR_VSINTS (1 << 9)
+# define LDINTR_VEINTS (1 << 8)
+# define VINT_START (LDINTR_VSINTEN)
+# define VINT_CHECK (LDINTR_VSINTS)
+#else
+/* LDINTR bit */
+# define LDINTR_VINTSEL (1 << 12)
+# define LDINTR_VINTE (1 << 8)
+# define LDINTR_VINTS (1 << 0)
+# define VINT_START (LDINTR_VINTSEL)
+# define VINT_CHECK (LDINTR_VINTS)
+#endif
+
+/* HSYNC polarity inversion */
+#define LDMTR_FLMPOL (1 << 15)
+
+/* VSYNC polarity inversion */
+#define LDMTR_CL1POL (1 << 14)
+
+/* DISPLAY-ENABLE polarity inversion */
+#define LDMTR_DISPEN_LOWACT (1 << 13)
+
+/* DISPLAY DATA BUS polarity inversion */
+#define LDMTR_DPOL_LOWACT (1 << 12)
+
+/* AC modulation signal enable */
+#define LDMTR_MCNT (1 << 10)
+
+/* Disable output of HSYNC during VSYNC period */
+#define LDMTR_CL1CNT (1 << 9)
+
+/* Disable output of VSYNC during VSYNC period */
+#define LDMTR_CL2CNT (1 << 8)
+
+/* Display types supported by the LCDC */
+#define LDMTR_STN_MONO_4       0x00
+#define LDMTR_STN_MONO_8       0x01
+#define LDMTR_STN_COLOR_4      0x08
+#define LDMTR_STN_COLOR_8      0x09
+#define LDMTR_STN_COLOR_12     0x0A
+#define LDMTR_STN_COLOR_16     0x0B
+#define LDMTR_DSTN_MONO_8      0x11
+#define LDMTR_DSTN_MONO_16     0x13
+#define LDMTR_DSTN_COLOR_8     0x19
+#define LDMTR_DSTN_COLOR_12    0x1A
+#define LDMTR_DSTN_COLOR_16    0x1B
+#define LDMTR_TFT_COLOR_16     0x2B
+
+/* framebuffer color layout */
+#define LDDFR_1BPP_MONO 0x00
+#define LDDFR_2BPP_MONO 0x01
+#define LDDFR_4BPP_MONO 0x02
+#define LDDFR_6BPP_MONO 0x04
+#define LDDFR_4BPP 0x0A
+#define LDDFR_8BPP 0x0C
+#define LDDFR_16BPP_RGB555 0x1D
+#define LDDFR_16BPP_RGB565 0x2D
+
+/* LCDC Pixclock sources */
+#define LCDC_CLKSRC_BUSCLOCK 0
+#define LCDC_CLKSRC_PERIPHERAL 1
+#define LCDC_CLKSRC_EXTERNAL 2
+
+#define LDICKR_CLKSRC(x) \
+       (((x) & 3) << 12)
+
+/* LCDC pixclock input divider. Set to 1 at a minimum! */
+#define LDICKR_CLKDIV(x) \
+       ((x) & 0x1f)
+
+struct sh7760fb_platdata {
+
+	/* Set this member to a valid fb_videmode for the display you
+	 * wish to use.  The following members must be initialized:
+	 * xres, yres, hsync_len, vsync_len, sync,
+	 * {left,right,upper,lower}_margin.
+	 * The driver uses the above members to calculate register values
+	 * and memory requirements. Other members are ignored but may
+	 * be used by other framebuffer layer components.
+	 */
+	struct fb_videomode *def_mode;
+
+	/* LDMTR includes display type and signal polarity.  The
+	 * HSYNC/VSYNC polarities are derived from the fb_var_screeninfo
+	 * data above; however the polarities of the following signals
+	 * must be encoded in the ldmtr member:
+	 * Display Enable signal (default high-active)  DISPEN_LOWACT
+	 * Display Data signals (default high-active)   DPOL_LOWACT
+	 * AC Modulation signal (default off)           MCNT
+	 * Hsync-During-Vsync suppression (default off) CL1CNT
+	 * Vsync-during-vsync suppression (default off) CL2CNT
+	 * NOTE: also set a display type!
+	 * (one of LDMTR_{STN,DSTN,TFT}_{MONO,COLOR}_{4,8,12,16})
+	 */
+	u16 ldmtr;
+
+	/* LDDFR controls framebuffer image format (depth, organization)
+	 * Use ONE of the LDDFR_?BPP_* macros!
+	 */
+	u16 lddfr;
+
+	/* LDPMMR and LDPSPR control the timing of the power signals
+	 * for the display. Please read the SH7760 Hardware Manual,
+	 * Chapters 30.3.17, 30.3.18 and 30.4.6!
+	 */
+	u16 ldpmmr;
+	u16 ldpspr;
+
+	/* LDACLNR contains the line numbers after which the AC modulation
+	 * signal is to toggle. Set to ZERO for TFTs or displays which
+	 * do not need it. (Chapter 30.3.15 in SH7760 Hardware Manual).
+	 */
+	u16 ldaclnr;
+
+	/* LDICKR contains information on pixelclock source and config.
+	 * Please use the LDICKR_CLKSRC() and LDICKR_CLKDIV() macros.
+	 * minimal value for CLKDIV() must be 1!.
+	 */
+	u16 ldickr;
+
+	/* set this member to 1 if you wish to use the LCDC's hardware
+	 * rotation function.  This is limited to displays <= 320x200
+	 * pixels resolution!
+	 */
+	int rotate;		/* set to 1 to rotate 90 CCW */
+
+	/* set this to 1 to suppress vsync irq use. */
+	int novsync;
+
+	/* blanking hook for platform. Set this if your platform can do
+	 * more than the LCDC in terms of blanking (e.g. disable clock
+	 * generator / backlight power supply / etc.
+	 */
+	void (*blank) (int);
+};
+
+#endif /* _ASM_SH_SH7760FB_H */
diff --git a/arch/sh/include/asm/sh7763rdp.h b/arch/sh/include/asm/sh7763rdp.h
new file mode 100644
index 000000000000..8750cc852977
--- /dev/null
+++ b/arch/sh/include/asm/sh7763rdp.h
@@ -0,0 +1,54 @@
+#ifndef __ASM_SH_SH7763RDP_H
+#define __ASM_SH_SH7763RDP_H
+
+/*
+ * linux/include/asm-sh/sh7763drp.h
+ *
+ * Copyright (C) 2008 Renesas Solutions
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <asm/addrspace.h>
+
+/* clock control */
+#define MSTPCR1 0xFFC80038
+
+/* PORT */
+#define PORT_PSEL0	0xFFEF0070
+#define PORT_PSEL1	0xFFEF0072
+#define PORT_PSEL2	0xFFEF0074
+#define PORT_PSEL3	0xFFEF0076
+#define PORT_PSEL4	0xFFEF0078
+
+#define PORT_PACR	0xFFEF0000
+#define PORT_PCCR	0xFFEF0004
+#define PORT_PFCR	0xFFEF000A
+#define PORT_PGCR	0xFFEF000C
+#define PORT_PHCR	0xFFEF000E
+#define PORT_PICR	0xFFEF0010
+#define PORT_PJCR	0xFFEF0012
+#define PORT_PKCR	0xFFEF0014
+#define PORT_PLCR	0xFFEF0016
+#define PORT_PMCR	0xFFEF0018
+#define PORT_PNCR	0xFFEF001A
+
+/* FPGA */
+#define CPLD_BOARD_ID_ERV_REG	0xB1000000
+#define CPLD_CPLD_CMD_REG		0xB1000006
+
+/*
+ * USB SH7763RDP board can use Host only.
+ */
+#define USB_USBHSC	0xFFEC80f0
+
+/* arch/sh/boards/renesas/sh7763rdp/irq.c */
+void init_sh7763rdp_IRQ(void);
+int sh7763rdp_irq_demux(int irq);
+#define __IO_PREFIX	sh7763rdp
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_SH7763RDP_H */
diff --git a/arch/sh/include/asm/sh7785lcr.h b/arch/sh/include/asm/sh7785lcr.h
new file mode 100644
index 000000000000..1ce27d5c7491
--- /dev/null
+++ b/arch/sh/include/asm/sh7785lcr.h
@@ -0,0 +1,55 @@
+#ifndef __ASM_SH_RENESAS_SH7785LCR_H
+#define __ASM_SH_RENESAS_SH7785LCR_H
+
+/*
+ * This board has 2 physical memory maps.
+ * It can be changed with DIP switch(S2-5).
+ *
+ * phys address			| S2-5 = OFF	| S2-5 = ON
+ * -----------------------------+---------------+---------------
+ * 0x00000000 - 0x03ffffff(CS0)	| NOR Flash	| NOR Flash
+ * 0x04000000 - 0x05ffffff(CS1)	| PLD		| PLD
+ * 0x06000000 - 0x07ffffff(CS1)	| reserved	| I2C
+ * 0x08000000 - 0x0bffffff(CS2)	| USB		| DDR SDRAM
+ * 0x0c000000 - 0x0fffffff(CS3)	| SD		| DDR SDRAM
+ * 0x10000000 - 0x13ffffff(CS4)	| SM107		| SM107
+ * 0x14000000 - 0x17ffffff(CS5)	| I2C		| USB
+ * 0x18000000 - 0x1bffffff(CS6)	| reserved	| SD
+ * 0x40000000 - 0x5fffffff	| DDR SDRAM	| (cannot use)
+ *
+ */
+
+#define NOR_FLASH_ADDR		0x00000000
+#define NOR_FLASH_SIZE		0x04000000
+
+#define PLD_BASE_ADDR		0x04000000
+#define PLD_PCICR		(PLD_BASE_ADDR + 0x00)
+#define PLD_LCD_BK_CONTR	(PLD_BASE_ADDR + 0x02)
+#define PLD_LOCALCR		(PLD_BASE_ADDR + 0x04)
+#define PLD_POFCR		(PLD_BASE_ADDR + 0x06)
+#define PLD_LEDCR		(PLD_BASE_ADDR + 0x08)
+#define PLD_SWSR		(PLD_BASE_ADDR + 0x0a)
+#define PLD_VERSR		(PLD_BASE_ADDR + 0x0c)
+#define PLD_MMSR		(PLD_BASE_ADDR + 0x0e)
+
+#define SM107_MEM_ADDR		0x10000000
+#define SM107_MEM_SIZE		0x00e00000
+#define SM107_REG_ADDR		0x13e00000
+#define SM107_REG_SIZE		0x00200000
+
+#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS)
+#define R8A66597_ADDR		0x14000000	/* USB */
+#define CG200_ADDR		0x18000000	/* SD */
+#define PCA9564_ADDR		0x06000000	/* I2C */
+#else
+#define R8A66597_ADDR		0x08000000
+#define CG200_ADDR		0x0c000000
+#define PCA9564_ADDR		0x14000000
+#endif
+
+#define R8A66597_SIZE		0x00000100
+#define CG200_SIZE		0x00010000
+#define PCA9564_SIZE		0x00000100
+
+#endif  /* __ASM_SH_RENESAS_SH7785LCR_H */
+
diff --git a/arch/sh/include/asm/sh_bios.h b/arch/sh/include/asm/sh_bios.h
new file mode 100644
index 000000000000..0ca261956e3d
--- /dev/null
+++ b/arch/sh/include/asm/sh_bios.h
@@ -0,0 +1,19 @@
+#ifndef __ASM_SH_BIOS_H
+#define __ASM_SH_BIOS_H
+
+/*
+ * Copyright (C) 2000 Greg Banks, Mitch Davis
+ * C API to interface to the standard LinuxSH BIOS
+ * usually from within the early stages of kernel boot.
+ */
+
+
+extern void sh_bios_console_write(const char *buf, unsigned int len);
+extern void sh_bios_char_out(char ch);
+extern int sh_bios_in_gdb_mode(void);
+extern void sh_bios_gdb_detach(void);
+
+extern void sh_bios_get_node_addr(unsigned char *node_addr);
+extern void sh_bios_shutdown(unsigned int how);
+
+#endif /* __ASM_SH_BIOS_H */
diff --git a/arch/sh/include/asm/sh_keysc.h b/arch/sh/include/asm/sh_keysc.h
new file mode 100644
index 000000000000..b5a4dd5a9729
--- /dev/null
+++ b/arch/sh/include/asm/sh_keysc.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_KEYSC_H__
+#define __ASM_KEYSC_H__
+
+#define SH_KEYSC_MAXKEYS 30
+
+struct sh_keysc_info {
+	enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3 } mode;
+	int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */
+	int delay;
+	int keycodes[SH_KEYSC_MAXKEYS];
+};
+
+#endif /* __ASM_KEYSC_H__ */
diff --git a/arch/sh/include/asm/sh_mobile_lcdc.h b/arch/sh/include/asm/sh_mobile_lcdc.h
new file mode 100644
index 000000000000..27677727df4d
--- /dev/null
+++ b/arch/sh/include/asm/sh_mobile_lcdc.h
@@ -0,0 +1,66 @@
+#ifndef __ASM_SH_MOBILE_LCDC_H__
+#define __ASM_SH_MOBILE_LCDC_H__
+
+#include <linux/fb.h>
+
+enum { RGB8,   /* 24bpp, 8:8:8 */
+       RGB9,   /* 18bpp, 9:9 */
+       RGB12A, /* 24bpp, 12:12 */
+       RGB12B, /* 12bpp */
+       RGB16,  /* 16bpp */
+       RGB18,  /* 18bpp */
+       RGB24,  /* 24bpp */
+       SYS8A,  /* 24bpp, 8:8:8 */
+       SYS8B,  /* 18bpp, 8:8:2 */
+       SYS8C,  /* 18bpp, 2:8:8 */
+       SYS8D,  /* 16bpp, 8:8 */
+       SYS9,   /* 18bpp, 9:9 */
+       SYS12,  /* 24bpp, 12:12 */
+       SYS16A, /* 16bpp */
+       SYS16B, /* 18bpp, 16:2 */
+       SYS16C, /* 18bpp, 2:16 */
+       SYS18,  /* 18bpp */
+       SYS24 };/* 24bpp */
+
+enum { LCDC_CHAN_DISABLED = 0,
+       LCDC_CHAN_MAINLCD,
+       LCDC_CHAN_SUBLCD };
+
+enum { LCDC_CLK_BUS, LCDC_CLK_PERIPHERAL, LCDC_CLK_EXTERNAL };
+
+struct sh_mobile_lcdc_sys_bus_cfg {
+	unsigned long ldmt2r;
+	unsigned long ldmt3r;
+};
+
+struct sh_mobile_lcdc_sys_bus_ops {
+	void (*write_index)(void *handle, unsigned long data);
+	void (*write_data)(void *handle, unsigned long data);
+	unsigned long (*read_data)(void *handle);
+};
+
+struct sh_mobile_lcdc_board_cfg {
+	void *board_data;
+	int (*setup_sys)(void *board_data, void *sys_ops_handle,
+			 struct sh_mobile_lcdc_sys_bus_ops *sys_ops);
+	void (*display_on)(void *board_data);
+	void (*display_off)(void *board_data);
+};
+
+struct sh_mobile_lcdc_chan_cfg {
+	int chan;
+	int bpp;
+	int interface_type; /* selects RGBn or SYSn I/F, see above */
+	int clock_divider;
+	struct fb_videomode lcd_cfg;
+	struct sh_mobile_lcdc_board_cfg board_cfg;
+	struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */
+};
+
+struct sh_mobile_lcdc_info {
+	unsigned long lddckr;
+	int clock_source;
+	struct sh_mobile_lcdc_chan_cfg ch[2];
+};
+
+#endif /* __ASM_SH_MOBILE_LCDC_H__ */
diff --git a/arch/sh/include/asm/shmbuf.h b/arch/sh/include/asm/shmbuf.h
new file mode 100644
index 000000000000..b2101f490521
--- /dev/null
+++ b/arch/sh/include/asm/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef __ASM_SH_SHMBUF_H
+#define __ASM_SH_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for i386 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __ASM_SH_SHMBUF_H */
diff --git a/arch/sh/include/asm/shmin.h b/arch/sh/include/asm/shmin.h
new file mode 100644
index 000000000000..36ba138a81fb
--- /dev/null
+++ b/arch/sh/include/asm/shmin.h
@@ -0,0 +1,9 @@
+#ifndef __ASM_SH_SHMIN_H
+#define __ASM_SH_SHMIN_H
+
+#define SHMIN_IO_BASE 0xb0000000UL
+
+#define SHMIN_NE_IRQ IRQ2_IRQ
+#define SHMIN_NE_BASE 0x300
+
+#endif
diff --git a/arch/sh/include/asm/shmparam.h b/arch/sh/include/asm/shmparam.h
new file mode 100644
index 000000000000..ba1758d90106
--- /dev/null
+++ b/arch/sh/include/asm/shmparam.h
@@ -0,0 +1,22 @@
+/*
+ * include/asm-sh/shmparam.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2006 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_SHMPARAM_H
+#define __ASM_SH_SHMPARAM_H
+
+/*
+ * SH-4 and SH-3 7705 have an aliasing dcache. Bump this up to a sensible value
+ * for everyone, and work out the specifics from the probed cache descriptor.
+ */
+#define	SHMLBA	0x4000		 /* attach addr a multiple of this */
+
+#define __ARCH_FORCE_SHMLBA
+
+#endif /* __ASM_SH_SHMPARAM_H */
diff --git a/arch/sh/include/asm/sigcontext.h b/arch/sh/include/asm/sigcontext.h
new file mode 100644
index 000000000000..8ce1435bc0bf
--- /dev/null
+++ b/arch/sh/include/asm/sigcontext.h
@@ -0,0 +1,40 @@
+#ifndef __ASM_SH_SIGCONTEXT_H
+#define __ASM_SH_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long	oldmask;
+
+#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
+	/* CPU registers */
+	unsigned long long sc_regs[63];
+	unsigned long long sc_tregs[8];
+	unsigned long long sc_pc;
+	unsigned long long sc_sr;
+
+	/* FPU registers */
+	unsigned long long sc_fpregs[32];
+	unsigned int sc_fpscr;
+	unsigned int sc_fpvalid;
+#else
+	/* CPU registers */
+	unsigned long sc_regs[16];
+	unsigned long sc_pc;
+	unsigned long sc_pr;
+	unsigned long sc_sr;
+	unsigned long sc_gbr;
+	unsigned long sc_mach;
+	unsigned long sc_macl;
+
+#if defined(__SH4__) || defined(CONFIG_CPU_SH4) || \
+    defined(__SH2A__) || defined(CONFIG_CPU_SH2A)
+	/* FPU registers */
+	unsigned long sc_fpregs[16];
+	unsigned long sc_xfpregs[16];
+	unsigned int sc_fpscr;
+	unsigned int sc_fpul;
+	unsigned int sc_ownedfp;
+#endif
+#endif
+};
+
+#endif /* __ASM_SH_SIGCONTEXT_H */
diff --git a/arch/sh/include/asm/siginfo.h b/arch/sh/include/asm/siginfo.h
new file mode 100644
index 000000000000..813040ed68a9
--- /dev/null
+++ b/arch/sh/include/asm/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_SIGINFO_H
+#define __ASM_SH_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif /* __ASM_SH_SIGINFO_H */
diff --git a/arch/sh/include/asm/signal.h b/arch/sh/include/asm/signal.h
new file mode 100644
index 000000000000..5c5c1e852089
--- /dev/null
+++ b/arch/sh/include/asm/signal.h
@@ -0,0 +1,160 @@
+#ifndef __ASM_SH_SIGNAL_H
+#define __ASM_SH_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct pt_regs;
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+
+#define SA_RESTORER	0x04000000
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+	void *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_SIGNAL_H */
diff --git a/arch/sh/include/asm/smc37c93x.h b/arch/sh/include/asm/smc37c93x.h
new file mode 100644
index 000000000000..585da2a8fc45
--- /dev/null
+++ b/arch/sh/include/asm/smc37c93x.h
@@ -0,0 +1,190 @@
+#ifndef __ASM_SH_SMC37C93X_H
+#define __ASM_SH_SMC37C93X_H
+
+/*
+ * linux/include/asm-sh/smc37c93x.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * SMSC 37C93x Super IO Chip support
+ */
+
+/* Default base I/O address */
+#define FDC_PRIMARY_BASE	0x3f0
+#define IDE1_PRIMARY_BASE	0x1f0
+#define IDE1_SECONDARY_BASE	0x170
+#define PARPORT_PRIMARY_BASE	0x378
+#define COM1_PRIMARY_BASE	0x2f8
+#define COM2_PRIMARY_BASE	0x3f8
+#define RTC_PRIMARY_BASE	0x070
+#define KBC_PRIMARY_BASE	0x060
+#define AUXIO_PRIMARY_BASE	0x000	/* XXX */
+
+/* Logical device number */
+#define LDN_FDC			0
+#define LDN_IDE1		1
+#define LDN_IDE2		2
+#define LDN_PARPORT		3
+#define LDN_COM1		4
+#define LDN_COM2		5
+#define LDN_RTC			6
+#define LDN_KBC			7
+#define LDN_AUXIO		8
+
+/* Configuration port and key */
+#define CONFIG_PORT		0x3f0
+#define INDEX_PORT		CONFIG_PORT
+#define DATA_PORT		0x3f1
+#define CONFIG_ENTER		0x55
+#define CONFIG_EXIT		0xaa
+
+/* Configuration index */
+#define CURRENT_LDN_INDEX	0x07
+#define POWER_CONTROL_INDEX	0x22
+#define ACTIVATE_INDEX		0x30
+#define IO_BASE_HI_INDEX	0x60
+#define IO_BASE_LO_INDEX	0x61
+#define IRQ_SELECT_INDEX	0x70
+#define DMA_SELECT_INDEX	0x74
+
+#define GPIO46_INDEX		0xc6
+#define GPIO47_INDEX		0xc7
+
+/* UART stuff. Only for debugging.  */
+/* UART Register */
+
+#define UART_RBR	0x0	/* Receiver Buffer Register (Read Only) */
+#define UART_THR	0x0	/* Transmitter Holding Register (Write Only) */
+#define UART_IER	0x2	/* Interrupt Enable Register */
+#define UART_IIR	0x4	/* Interrupt Ident Register (Read Only) */
+#define UART_FCR	0x4	/* FIFO Control Register (Write Only) */
+#define UART_LCR	0x6	/* Line Control Register */
+#define UART_MCR	0x8	/* MODEM Control Register */
+#define UART_LSR	0xa	/* Line Status Register */
+#define UART_MSR	0xc	/* MODEM Status Register */
+#define UART_SCR	0xe	/* Scratch Register */
+#define UART_DLL	0x0	/* Divisor Latch (LS) */
+#define UART_DLM	0x2	/* Divisor Latch (MS) */
+
+#ifndef __ASSEMBLY__
+typedef struct uart_reg {
+	volatile __u16 rbr;
+	volatile __u16 ier;
+	volatile __u16 iir;
+	volatile __u16 lcr;
+	volatile __u16 mcr;
+	volatile __u16 lsr;
+	volatile __u16 msr;
+	volatile __u16 scr;
+} uart_reg;
+#endif /* ! __ASSEMBLY__ */
+
+/* Alias for Write Only Register */
+
+#define thr	rbr
+#define tcr	iir
+
+/* Alias for Divisor Latch Register */
+
+#define dll	rbr
+#define dlm	ier
+#define fcr	iir
+
+/* Interrupt Enable Register */
+
+#define IER_ERDAI	0x0100	/* Enable Received Data Available Interrupt */
+#define IER_ETHREI	0x0200	/* Enable Transmitter Holding Register Empty Interrupt */
+#define IER_ELSI	0x0400	/* Enable Receiver Line Status Interrupt */
+#define IER_EMSI	0x0800	/* Enable MODEM Status Interrupt */
+
+/* Interrupt Ident Register */
+
+#define IIR_IP		0x0100	/* "0" if Interrupt Pending */
+#define IIR_IIB0	0x0200	/* Interrupt ID Bit 0 */
+#define IIR_IIB1	0x0400	/* Interrupt ID Bit 1 */
+#define IIR_IIB2	0x0800	/* Interrupt ID Bit 2 */
+#define IIR_FIFO	0xc000	/* FIFOs enabled */
+
+/* FIFO Control Register */
+
+#define FCR_FEN		0x0100	/* FIFO enable */
+#define FCR_RFRES	0x0200	/* Receiver FIFO reset */
+#define FCR_TFRES	0x0400	/* Transmitter FIFO reset */
+#define FCR_DMA		0x0800	/* DMA mode select */
+#define FCR_RTL		0x4000	/* Receiver triger (LSB) */
+#define FCR_RTM		0x8000	/* Receiver triger (MSB) */
+
+/* Line Control Register */
+
+#define LCR_WLS0	0x0100	/* Word Length Select Bit 0 */
+#define LCR_WLS1	0x0200	/* Word Length Select Bit 1 */
+#define LCR_STB		0x0400	/* Number of Stop Bits */
+#define LCR_PEN		0x0800	/* Parity Enable */
+#define LCR_EPS		0x1000	/* Even Parity Select */
+#define LCR_SP		0x2000	/* Stick Parity */
+#define LCR_SB		0x4000	/* Set Break */
+#define LCR_DLAB	0x8000	/* Divisor Latch Access Bit */
+
+/* MODEM Control Register */
+
+#define MCR_DTR		0x0100	/* Data Terminal Ready */
+#define MCR_RTS		0x0200	/* Request to Send */
+#define MCR_OUT1	0x0400	/* Out 1 */
+#define MCR_IRQEN	0x0800	/* IRQ Enable */
+#define MCR_LOOP	0x1000	/* Loop */
+
+/* Line Status Register */
+
+#define LSR_DR		0x0100	/* Data Ready */
+#define LSR_OE		0x0200	/* Overrun Error */
+#define LSR_PE		0x0400	/* Parity Error */
+#define LSR_FE		0x0800	/* Framing Error */
+#define LSR_BI		0x1000	/* Break Interrupt */
+#define LSR_THRE	0x2000	/* Transmitter Holding Register Empty */
+#define LSR_TEMT	0x4000	/* Transmitter Empty */
+#define LSR_FIFOE	0x8000	/* Receiver FIFO error */
+
+/* MODEM Status Register */
+
+#define MSR_DCTS	0x0100	/* Delta Clear to Send */
+#define MSR_DDSR	0x0200	/* Delta Data Set Ready */
+#define MSR_TERI	0x0400	/* Trailing Edge Ring Indicator */
+#define MSR_DDCD	0x0800	/* Delta Data Carrier Detect */
+#define MSR_CTS		0x1000	/* Clear to Send */
+#define MSR_DSR		0x2000	/* Data Set Ready */
+#define MSR_RI		0x4000	/* Ring Indicator */
+#define MSR_DCD		0x8000	/* Data Carrier Detect */
+
+/* Baud Rate Divisor */
+
+#define UART_CLK	(1843200)	/* 1.8432 MHz */
+#define UART_BAUD(x)	(UART_CLK / (16 * (x)))
+
+/* RTC register definition */
+#define RTC_SECONDS             0
+#define RTC_SECONDS_ALARM       1
+#define RTC_MINUTES             2
+#define RTC_MINUTES_ALARM       3
+#define RTC_HOURS               4
+#define RTC_HOURS_ALARM         5
+#define RTC_DAY_OF_WEEK         6
+#define RTC_DAY_OF_MONTH        7
+#define RTC_MONTH               8
+#define RTC_YEAR                9
+#define RTC_FREQ_SELECT		10
+# define RTC_UIP 0x80
+# define RTC_DIV_CTL 0x70
+/* This RTC can work under 32.768KHz clock only.  */
+# define RTC_OSC_ENABLE 0x20
+# define RTC_OSC_DISABLE 0x00
+#define RTC_CONTROL     	11
+# define RTC_SET 0x80
+# define RTC_PIE 0x40
+# define RTC_AIE 0x20
+# define RTC_UIE 0x10
+# define RTC_SQWE 0x08
+# define RTC_DM_BINARY 0x04
+# define RTC_24H 0x02
+# define RTC_DST_EN 0x01
+
+#endif  /* __ASM_SH_SMC37C93X_H */
diff --git a/arch/sh/include/asm/smp.h b/arch/sh/include/asm/smp.h
new file mode 100644
index 000000000000..593343cd26ee
--- /dev/null
+++ b/arch/sh/include/asm/smp.h
@@ -0,0 +1,50 @@
+#ifndef __ASM_SH_SMP_H
+#define __ASM_SH_SMP_H
+
+#include <linux/bitops.h>
+#include <linux/cpumask.h>
+
+#ifdef CONFIG_SMP
+
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+#include <asm/current.h>
+
+#define raw_smp_processor_id()	(current_thread_info()->cpu)
+#define hard_smp_processor_id()	plat_smp_processor_id()
+
+/* Map from cpu id to sequential logical cpu number. */
+extern int __cpu_number_map[NR_CPUS];
+#define cpu_number_map(cpu)  __cpu_number_map[cpu]
+
+/* The reverse map from sequential logical cpu number to cpu id.  */
+extern int __cpu_logical_map[NR_CPUS];
+#define cpu_logical_map(cpu)  __cpu_logical_map[cpu]
+
+/* I've no idea what the real meaning of this is */
+#define PROC_CHANGE_PENALTY	20
+
+#define NO_PROC_ID	(-1)
+
+#define SMP_MSG_FUNCTION	0
+#define SMP_MSG_RESCHEDULE	1
+#define SMP_MSG_FUNCTION_SINGLE	2
+#define SMP_MSG_NR		3
+
+void plat_smp_setup(void);
+void plat_prepare_cpus(unsigned int max_cpus);
+int plat_smp_processor_id(void);
+void plat_start_cpu(unsigned int cpu, unsigned long entry_point);
+void plat_send_ipi(unsigned int cpu, unsigned int message);
+int plat_register_ipi_handler(unsigned int message,
+			      void (*handler)(void *), void *arg);
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+#else
+
+#define hard_smp_processor_id()	(0)
+
+#endif /* CONFIG_SMP */
+
+#endif /* __ASM_SH_SMP_H */
diff --git a/arch/sh/include/asm/snapgear.h b/arch/sh/include/asm/snapgear.h
new file mode 100644
index 000000000000..042d95f51c4d
--- /dev/null
+++ b/arch/sh/include/asm/snapgear.h
@@ -0,0 +1,71 @@
+/*
+ * include/asm-sh/snapgear.h
+ *
+ * Modified version of io_se.h for the snapgear-specific functions.
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * IO functions for a SnapGear
+ */
+
+#ifndef _ASM_SH_IO_SNAPGEAR_H
+#define _ASM_SH_IO_SNAPGEAR_H
+
+#if defined(CONFIG_CPU_SH4)
+/*
+ * The external interrupt lines, these take up ints 0 - 15 inclusive
+ * depending on the priority for the interrupt.  In fact the priority
+ * is the interrupt :-)
+ */
+
+#define IRL0_IRQ	2
+#define IRL0_PRIORITY	13
+
+#define IRL1_IRQ	5
+#define IRL1_PRIORITY	10
+
+#define IRL2_IRQ	8
+#define IRL2_PRIORITY	7
+
+#define IRL3_IRQ	11
+#define IRL3_PRIORITY	4
+#endif
+
+#define __IO_PREFIX	snapgear
+#include <asm/io_generic.h>
+
+#ifdef CONFIG_SH_SECUREEDGE5410
+/*
+ * We need to remember what was written to the ioport as some bits
+ * are shared with other functions and you cannot read back what was
+ * written :-|
+ *
+ * Bit        Read                   Write
+ * -----------------------------------------------
+ * D0         DCD on ttySC1          power
+ * D1         Reset Switch           heatbeat
+ * D2         ttySC0 CTS (7100)      LAN
+ * D3         -                      WAN
+ * D4         ttySC0 DCD (7100)      CONSOLE
+ * D5         -                      ONLINE
+ * D6         -                      VPN
+ * D7         -                      DTR on ttySC1
+ * D8         -                      ttySC0 RTS (7100)
+ * D9         -                      ttySC0 DTR (7100)
+ * D10        -                      RTC SCLK
+ * D11        RTC DATA               RTC DATA
+ * D12        -                      RTS RESET
+ */
+
+#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000)
+extern unsigned short secureedge5410_ioport;
+
+#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \
+	 (secureedge5410_ioport = \
+			((secureedge5410_ioport & ~(mask)) | ((val) & (mask)))))
+#define SECUREEDGE_READ_IOPORT() \
+	 ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817))
+#endif
+
+#endif /* _ASM_SH_IO_SNAPGEAR_H */
diff --git a/arch/sh/include/asm/socket.h b/arch/sh/include/asm/socket.h
new file mode 100644
index 000000000000..6d4bf6512959
--- /dev/null
+++ b/arch/sh/include/asm/socket.h
@@ -0,0 +1,57 @@
+#ifndef __ASM_SH_SOCKET_H
+#define __ASM_SH_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_RCVBUFFORCE	32
+#define SO_SNDBUFFORCE	33
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+#define SO_PASSSEC		34
+#define SO_TIMESTAMPNS		35
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			36
+
+#endif /* __ASM_SH_SOCKET_H */
diff --git a/arch/sh/include/asm/sockios.h b/arch/sh/include/asm/sockios.h
new file mode 100644
index 000000000000..cf8b96b1f9ab
--- /dev/null
+++ b/arch/sh/include/asm/sockios.h
@@ -0,0 +1,14 @@
+#ifndef __ASM_SH_SOCKIOS_H
+#define __ASM_SH_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOGETOWN	_IOR('f', 123, int)
+#define FIOSETOWN 	_IOW('f', 124, int)
+
+#define SIOCATMARK	_IOR('s', 7, int)
+#define SIOCSPGRP	_IOW('s', 8, pid_t)
+#define SIOCGPGRP	_IOR('s', 9, pid_t)
+
+#define SIOCGSTAMP	_IOR('s', 100, struct timeval) /* Get stamp (timeval) */
+#define SIOCGSTAMPNS	_IOR('s', 101, struct timespec) /* Get stamp (timespec) */
+#endif /* __ASM_SH_SOCKIOS_H */
diff --git a/arch/sh/include/asm/sparsemem.h b/arch/sh/include/asm/sparsemem.h
new file mode 100644
index 000000000000..547a540b6667
--- /dev/null
+++ b/arch/sh/include/asm/sparsemem.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_SH_SPARSEMEM_H
+#define __ASM_SH_SPARSEMEM_H
+
+#ifdef __KERNEL__
+/*
+ * SECTION_SIZE_BITS		2^N: how big each section will be
+ * MAX_PHYSADDR_BITS		2^N: how much physical address space we have
+ * MAX_PHYSMEM_BITS		2^N: how much memory we can have in that space
+ */
+#define SECTION_SIZE_BITS	26
+#define MAX_PHYSADDR_BITS	32
+#define MAX_PHYSMEM_BITS	32
+
+#endif
+
+#endif /* __ASM_SH_SPARSEMEM_H */
diff --git a/arch/sh/include/asm/spi.h b/arch/sh/include/asm/spi.h
new file mode 100644
index 000000000000..e96f5b0953c8
--- /dev/null
+++ b/arch/sh/include/asm/spi.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_SPI_H__
+#define __ASM_SPI_H__
+
+struct sh_spi_info;
+
+struct sh_spi_info {
+	int			 bus_num;
+	int			 num_chipselect;
+
+	void (*chip_select)(struct sh_spi_info *spi, int cs, int state);
+};
+
+#endif /* __ASM_SPI_H__ */
diff --git a/arch/sh/include/asm/spinlock.h b/arch/sh/include/asm/spinlock.h
new file mode 100644
index 000000000000..e793181d64da
--- /dev/null
+++ b/arch/sh/include/asm/spinlock.h
@@ -0,0 +1,223 @@
+/*
+ * include/asm-sh/spinlock.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ * Copyright (C) 2006, 2007 Akio Idehara
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_SPINLOCK_H
+#define __ASM_SH_SPINLOCK_H
+
+/*
+ * The only locking implemented here uses SH-4A opcodes. For others,
+ * split this out as per atomic-*.h.
+ */
+#ifndef CONFIG_CPU_SH4A
+#error "Need movli.l/movco.l for spinlocks"
+#endif
+
+/*
+ * Your basic SMP spinlocks, allowing only a single CPU anywhere
+ */
+
+#define __raw_spin_is_locked(x)		((x)->lock <= 0)
+#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+#define __raw_spin_unlock_wait(x) \
+	do { cpu_relax(); } while ((x)->lock)
+
+/*
+ * Simple spin lock operations.  There are two variants, one clears IRQ's
+ * on the local processor, one does not.
+ *
+ * We make no fairness assumptions.  They have a cost.
+ */
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	unsigned long tmp;
+	unsigned long oldval;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%2, %0	! __raw_spin_lock	\n\t"
+		"mov		%0, %1				\n\t"
+		"mov		#0, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
+		"bf		1b				\n\t"
+		"cmp/pl		%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp), "=&r" (oldval)
+		: "r" (&lock->lock)
+		: "t", "memory"
+	);
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"mov		#1, %0 ! __raw_spin_unlock	\n\t"
+		"mov.l		%0, @%1				\n\t"
+		: "=&z" (tmp)
+		: "r" (&lock->lock)
+		: "t", "memory"
+	);
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	unsigned long tmp, oldval;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%2, %0	! __raw_spin_trylock	\n\t"
+		"mov		%0, %1				\n\t"
+		"mov		#0, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
+		"bf		1b				\n\t"
+		"synco						\n\t"
+		: "=&z" (tmp), "=&r" (oldval)
+		: "r" (&lock->lock)
+		: "t", "memory"
+	);
+
+	return oldval;
+}
+
+/*
+ * Read-write spinlocks, allowing multiple readers but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts but no interrupt
+ * writers. For those circumstances we can "mix" irq-safe locks - any writer
+ * needs to get a irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ */
+
+/**
+ * read_can_lock - would read_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_read_can_lock(x)	((x)->lock > 0)
+
+/**
+ * write_can_lock - would write_trylock() succeed?
+ * @lock: the rwlock in question.
+ */
+#define __raw_write_can_lock(x)	((x)->lock == RW_LOCK_BIAS)
+
+static inline void __raw_read_lock(raw_rwlock_t *rw)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! __raw_read_lock	\n\t"
+		"cmp/pl		%0				\n\t"
+		"bf		1b				\n\t"
+		"add		#-1, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp)
+		: "r" (&rw->lock)
+		: "t", "memory"
+	);
+}
+
+static inline void __raw_read_unlock(raw_rwlock_t *rw)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! __raw_read_unlock	\n\t"
+		"add		#1, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp)
+		: "r" (&rw->lock)
+		: "t", "memory"
+	);
+}
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%1, %0	! __raw_write_lock	\n\t"
+		"cmp/hs		%2, %0				\n\t"
+		"bf		1b				\n\t"
+		"sub		%2, %0				\n\t"
+		"movco.l	%0, @%1				\n\t"
+		"bf		1b				\n\t"
+		: "=&z" (tmp)
+		: "r" (&rw->lock), "r" (RW_LOCK_BIAS)
+		: "t", "memory"
+	);
+}
+
+static inline void __raw_write_unlock(raw_rwlock_t *rw)
+{
+	__asm__ __volatile__ (
+		"mov.l		%1, @%0 ! __raw_write_unlock	\n\t"
+		:
+		: "r" (&rw->lock), "r" (RW_LOCK_BIAS)
+		: "t", "memory"
+	);
+}
+
+static inline int __raw_read_trylock(raw_rwlock_t *rw)
+{
+	unsigned long tmp, oldval;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%2, %0	! __raw_read_trylock	\n\t"
+		"mov		%0, %1				\n\t"
+		"cmp/pl		%0				\n\t"
+		"bf		2f				\n\t"
+		"add		#-1, %0				\n\t"
+		"movco.l	%0, @%2				\n\t"
+		"bf		1b				\n\t"
+		"2:						\n\t"
+		"synco						\n\t"
+		: "=&z" (tmp), "=&r" (oldval)
+		: "r" (&rw->lock)
+		: "t", "memory"
+	);
+
+	return (oldval > 0);
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+	unsigned long tmp, oldval;
+
+	__asm__ __volatile__ (
+		"1:						\n\t"
+		"movli.l	@%2, %0	! __raw_write_trylock	\n\t"
+		"mov		%0, %1				\n\t"
+		"cmp/hs		%3, %0				\n\t"
+		"bf		2f				\n\t"
+		"sub		%3, %0				\n\t"
+		"2:						\n\t"
+		"movco.l	%0, @%2				\n\t"
+		"bf		1b				\n\t"
+		"synco						\n\t"
+		: "=&z" (tmp), "=&r" (oldval)
+		: "r" (&rw->lock), "r" (RW_LOCK_BIAS)
+		: "t", "memory"
+	);
+
+	return (oldval > (RW_LOCK_BIAS - 1));
+}
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /* __ASM_SH_SPINLOCK_H */
diff --git a/arch/sh/include/asm/spinlock_types.h b/arch/sh/include/asm/spinlock_types.h
new file mode 100644
index 000000000000..b4d244e7b60c
--- /dev/null
+++ b/arch/sh/include/asm/spinlock_types.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_SH_SPINLOCK_TYPES_H
+#define __ASM_SH_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED		{ 1 }
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_rwlock_t;
+
+#define RW_LOCK_BIAS			0x01000000
+#define __RAW_RW_LOCK_UNLOCKED		{ RW_LOCK_BIAS }
+
+#endif
diff --git a/arch/sh/include/asm/stat.h b/arch/sh/include/asm/stat.h
new file mode 100644
index 000000000000..e1810cc6e3da
--- /dev/null
+++ b/arch/sh/include/asm/stat.h
@@ -0,0 +1,138 @@
+#ifndef __ASM_SH_STAT_H
+#define __ASM_SH_STAT_H
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
+struct stat {
+	unsigned short st_dev;
+	unsigned short __pad1;
+	unsigned long st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned short __pad2;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned short	st_dev;
+	unsigned char	__pad0[10];
+
+	unsigned long	st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned short	st_rdev;
+	unsigned char	__pad3[10];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	unsigned long	st_blocks;	/* Number 512-byte blocks allocated. */
+	unsigned long	__pad4;		/* future possible st_blocks high bits */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;	/* will be high 32 bits of ctime someday */
+
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+#else
+struct stat {
+	unsigned long  st_dev;
+	unsigned long  st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned long  st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_blksize;
+	unsigned long  st_blocks;
+	unsigned long  st_atime;
+	unsigned long  st_atime_nsec;
+	unsigned long  st_mtime;
+	unsigned long  st_mtime_nsec;
+	unsigned long  st_ctime;
+	unsigned long  st_ctime_nsec;
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned char	__pad0[4];
+
+#define STAT64_HAS_BROKEN_ST_INO	1
+	unsigned long	__st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned long	st_uid;
+	unsigned long	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned char	__pad3[4];
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	unsigned long long	st_blocks;	/* Number 512-byte blocks allocated. */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long long	st_ino;
+};
+
+#define STAT_HAVE_NSEC 1
+#endif
+
+#endif /* __ASM_SH_STAT_H */
diff --git a/arch/sh/include/asm/statfs.h b/arch/sh/include/asm/statfs.h
new file mode 100644
index 000000000000..9202a023328f
--- /dev/null
+++ b/arch/sh/include/asm/statfs.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_STATFS_H
+#define __ASM_SH_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* __ASM_SH_STATFS_H */
diff --git a/arch/sh/include/asm/string.h b/arch/sh/include/asm/string.h
new file mode 100644
index 000000000000..8c1ea21dc0ae
--- /dev/null
+++ b/arch/sh/include/asm/string.h
@@ -0,0 +1,5 @@
+#ifdef CONFIG_SUPERH32
+# include "string_32.h"
+#else
+# include "string_64.h"
+#endif
diff --git a/arch/sh/include/asm/string_32.h b/arch/sh/include/asm/string_32.h
new file mode 100644
index 000000000000..55f8db6bc1d7
--- /dev/null
+++ b/arch/sh/include/asm/string_32.h
@@ -0,0 +1,131 @@
+#ifndef __ASM_SH_STRING_H
+#define __ASM_SH_STRING_H
+
+#ifdef __KERNEL__
+
+/*
+ * Copyright (C) 1999 Niibe Yutaka
+ * But consider these trivial functions to be public domain.
+ */
+
+#define __HAVE_ARCH_STRCPY
+static inline char *strcpy(char *__dest, const char *__src)
+{
+	register char *__xdest = __dest;
+	unsigned long __dummy;
+
+	__asm__ __volatile__("1:\n\t"
+			     "mov.b	@%1+, %2\n\t"
+			     "mov.b	%2, @%0\n\t"
+			     "cmp/eq	#0, %2\n\t"
+			     "bf/s	1b\n\t"
+			     " add	#1, %0\n\t"
+			     : "=r" (__dest), "=r" (__src), "=&z" (__dummy)
+			     : "0" (__dest), "1" (__src)
+			     : "memory", "t");
+
+	return __xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static inline char *strncpy(char *__dest, const char *__src, size_t __n)
+{
+	register char *__xdest = __dest;
+	unsigned long __dummy;
+
+	if (__n == 0)
+		return __xdest;
+
+	__asm__ __volatile__(
+		"1:\n"
+		"mov.b	@%1+, %2\n\t"
+		"mov.b	%2, @%0\n\t"
+		"cmp/eq	#0, %2\n\t"
+		"bt/s	2f\n\t"
+		" cmp/eq	%5,%1\n\t"
+		"bf/s	1b\n\t"
+		" add	#1, %0\n"
+		"2:"
+		: "=r" (__dest), "=r" (__src), "=&z" (__dummy)
+		: "0" (__dest), "1" (__src), "r" (__src+__n)
+		: "memory", "t");
+
+	return __xdest;
+}
+
+#define __HAVE_ARCH_STRCMP
+static inline int strcmp(const char *__cs, const char *__ct)
+{
+	register int __res;
+	unsigned long __dummy;
+
+	__asm__ __volatile__(
+		"mov.b	@%1+, %3\n"
+		"1:\n\t"
+		"mov.b	@%0+, %2\n\t"
+		"cmp/eq #0, %3\n\t"
+		"bt	2f\n\t"
+		"cmp/eq %2, %3\n\t"
+		"bt/s	1b\n\t"
+		" mov.b	@%1+, %3\n\t"
+		"add	#-2, %1\n\t"
+		"mov.b	@%1, %3\n\t"
+		"sub	%3, %2\n"
+		"2:"
+		: "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
+		: "0" (__cs), "1" (__ct)
+		: "t");
+
+	return __res;
+}
+
+#define __HAVE_ARCH_STRNCMP
+static inline int strncmp(const char *__cs, const char *__ct, size_t __n)
+{
+	register int __res;
+	unsigned long __dummy;
+
+	if (__n == 0)
+		return 0;
+
+	__asm__ __volatile__(
+		"mov.b	@%1+, %3\n"
+		"1:\n\t"
+		"mov.b	@%0+, %2\n\t"
+		"cmp/eq %6, %0\n\t"
+		"bt/s	2f\n\t"
+		" cmp/eq #0, %3\n\t"
+		"bt/s	3f\n\t"
+		" cmp/eq %3, %2\n\t"
+		"bt/s	1b\n\t"
+		" mov.b	@%1+, %3\n\t"
+		"add	#-2, %1\n\t"
+		"mov.b	@%1, %3\n"
+		"2:\n\t"
+		"sub	%3, %2\n"
+		"3:"
+		:"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy)
+		: "0" (__cs), "1" (__ct), "r" (__cs+__n)
+		: "t");
+
+	return __res;
+}
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *__s, int __c, size_t __count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *__to, __const__ void *__from, size_t __n);
+
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
+
+#define __HAVE_ARCH_MEMCHR
+extern void *memchr(const void *__s, int __c, size_t __n);
+
+#define __HAVE_ARCH_STRLEN
+extern size_t strlen(const char *);
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_STRING_H */
diff --git a/arch/sh/include/asm/string_64.h b/arch/sh/include/asm/string_64.h
new file mode 100644
index 000000000000..aa1fef229c78
--- /dev/null
+++ b/arch/sh/include/asm/string_64.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_SH_STRING_64_H
+#define __ASM_SH_STRING_64_H
+
+/*
+ * include/asm-sh/string_64.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *dest, const void *src, size_t count);
+
+#endif /* __ASM_SH_STRING_64_H */
diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h
new file mode 100644
index 000000000000..056d68cd2108
--- /dev/null
+++ b/arch/sh/include/asm/system.h
@@ -0,0 +1,190 @@
+#ifndef __ASM_SH_SYSTEM_H
+#define __ASM_SH_SYSTEM_H
+
+/*
+ * Copyright (C) 1999, 2000  Niibe Yutaka  &  Kaz Kojima
+ * Copyright (C) 2002 Paul Mundt
+ */
+
+#include <linux/irqflags.h>
+#include <linux/compiler.h>
+#include <linux/linkage.h>
+#include <asm/types.h>
+#include <asm/ptrace.h>
+
+#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */
+
+#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
+#define __icbi()			\
+{					\
+	unsigned long __addr;		\
+	__addr = 0xa8000000;		\
+	__asm__ __volatile__(		\
+		"icbi   %0\n\t"		\
+		: /* no output */	\
+		: "m" (__m(__addr)));	\
+}
+#endif
+
+/*
+ * A brief note on ctrl_barrier(), the control register write barrier.
+ *
+ * Legacy SH cores typically require a sequence of 8 nops after
+ * modification of a control register in order for the changes to take
+ * effect. On newer cores (like the sh4a and sh5) this is accomplished
+ * with icbi.
+ *
+ * Also note that on sh4a in the icbi case we can forego a synco for the
+ * write barrier, as it's not necessary for control registers.
+ *
+ * Historically we have only done this type of barrier for the MMUCR, but
+ * it's also necessary for the CCR, so we make it generic here instead.
+ */
+#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5)
+#define mb()		__asm__ __volatile__ ("synco": : :"memory")
+#define rmb()		mb()
+#define wmb()		__asm__ __volatile__ ("synco": : :"memory")
+#define ctrl_barrier()	__icbi()
+#define read_barrier_depends()	do { } while(0)
+#else
+#define mb()		__asm__ __volatile__ ("": : :"memory")
+#define rmb()		mb()
+#define wmb()		__asm__ __volatile__ ("": : :"memory")
+#define ctrl_barrier()	__asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop")
+#define read_barrier_depends()	do { } while(0)
+#endif
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	barrier()
+#define smp_rmb()	barrier()
+#define smp_wmb()	barrier()
+#define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
+
+#ifdef CONFIG_GUSA_RB
+#include <asm/cmpxchg-grb.h>
+#else
+#include <asm/cmpxchg-irq.h>
+#endif
+
+extern void __xchg_called_with_bad_pointer(void);
+
+#define __xchg(ptr, x, size)				\
+({							\
+	unsigned long __xchg__res;			\
+	volatile void *__xchg_ptr = (ptr);		\
+	switch (size) {					\
+	case 4:						\
+		__xchg__res = xchg_u32(__xchg_ptr, x);	\
+		break;					\
+	case 1:						\
+		__xchg__res = xchg_u8(__xchg_ptr, x);	\
+		break;					\
+	default:					\
+		__xchg_called_with_bad_pointer();	\
+		__xchg__res = x;			\
+		break;					\
+	}						\
+							\
+	__xchg__res;					\
+})
+
+#define xchg(ptr,x)	\
+	((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr))))
+
+/* This function doesn't exist, so you'll get a linker error
+ * if something tries to do an invalid cmpxchg(). */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old,
+		unsigned long new, int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32(ptr, old, new);
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn));
+
+extern void *set_exception_table_vec(unsigned int vec, void *handler);
+
+static inline void *set_exception_table_evt(unsigned int evt, void *handler)
+{
+	return set_exception_table_vec(evt >> 5, handler);
+}
+
+/*
+ * SH-2A has both 16 and 32-bit opcodes, do lame encoding checks.
+ */
+#ifdef CONFIG_CPU_SH2A
+extern unsigned int instruction_size(unsigned int insn);
+#elif defined(CONFIG_SUPERH32)
+#define instruction_size(insn)	(2)
+#else
+#define instruction_size(insn)	(4)
+#endif
+
+extern unsigned long cached_to_uncached;
+
+extern struct dentry *sh_debugfs_root;
+
+void per_cpu_trap_init(void);
+
+asmlinkage void break_point_trap(void);
+
+#ifdef CONFIG_SUPERH32
+#define BUILD_TRAP_HANDLER(name)					\
+asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5,	\
+				    unsigned long r6, unsigned long r7,	\
+				    struct pt_regs __regs)
+
+#define TRAP_HANDLER_DECL				\
+	struct pt_regs *regs = RELOC_HIDE(&__regs, 0);	\
+	unsigned int vec = regs->tra;			\
+	(void)vec;
+#else
+#define BUILD_TRAP_HANDLER(name)	\
+asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs)
+#define TRAP_HANDLER_DECL
+#endif
+
+BUILD_TRAP_HANDLER(address_error);
+BUILD_TRAP_HANDLER(debug);
+BUILD_TRAP_HANDLER(bug);
+BUILD_TRAP_HANDLER(fpu_error);
+BUILD_TRAP_HANDLER(fpu_state_restore);
+
+#define arch_align_stack(x) (x)
+
+struct mem_access {
+	unsigned long (*from)(void *dst, const void *src, unsigned long cnt);
+	unsigned long (*to)(void *dst, const void *src, unsigned long cnt);
+};
+
+#ifdef CONFIG_SUPERH32
+# include "system_32.h"
+#else
+# include "system_64.h"
+#endif
+
+#endif
diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h
new file mode 100644
index 000000000000..f11bcf0855ed
--- /dev/null
+++ b/arch/sh/include/asm/system_32.h
@@ -0,0 +1,102 @@
+#ifndef __ASM_SH_SYSTEM_32_H
+#define __ASM_SH_SYSTEM_32_H
+
+#include <linux/types.h>
+
+struct task_struct *__switch_to(struct task_struct *prev,
+				struct task_struct *next);
+
+/*
+ *	switch_to() should switch tasks to task nr n, first
+ */
+#define switch_to(prev, next, last)					\
+do {									\
+	register u32 *__ts1 __asm__ ("r1") = (u32 *)&prev->thread.sp;	\
+	register u32 *__ts2 __asm__ ("r2") = (u32 *)&prev->thread.pc;	\
+	register u32 *__ts4 __asm__ ("r4") = (u32 *)prev;		\
+	register u32 *__ts5 __asm__ ("r5") = (u32 *)next;		\
+	register u32 *__ts6 __asm__ ("r6") = (u32 *)&next->thread.sp;	\
+	register u32 __ts7 __asm__ ("r7") = next->thread.pc;		\
+	struct task_struct *__last;					\
+									\
+	__asm__ __volatile__ (						\
+		".balign 4\n\t"						\
+		"stc.l	gbr, @-r15\n\t"					\
+		"sts.l	pr, @-r15\n\t"					\
+		"mov.l	r8, @-r15\n\t"					\
+		"mov.l	r9, @-r15\n\t"					\
+		"mov.l	r10, @-r15\n\t"					\
+		"mov.l	r11, @-r15\n\t"					\
+		"mov.l	r12, @-r15\n\t"					\
+		"mov.l	r13, @-r15\n\t"					\
+		"mov.l	r14, @-r15\n\t"					\
+		"mov.l	r15, @r1\t! save SP\n\t"			\
+		"mov.l	@r6, r15\t! change to new stack\n\t"		\
+		"mova	1f, %0\n\t"					\
+		"mov.l	%0, @r2\t! save PC\n\t"				\
+		"mov.l	2f, %0\n\t"					\
+		"jmp	@%0\t! call __switch_to\n\t"			\
+		" lds	r7, pr\t!  with return to new PC\n\t"		\
+		".balign	4\n"					\
+		"2:\n\t"						\
+		".long	__switch_to\n"					\
+		"1:\n\t"						\
+		"mov.l	@r15+, r14\n\t"					\
+		"mov.l	@r15+, r13\n\t"					\
+		"mov.l	@r15+, r12\n\t"					\
+		"mov.l	@r15+, r11\n\t"					\
+		"mov.l	@r15+, r10\n\t"					\
+		"mov.l	@r15+, r9\n\t"					\
+		"mov.l	@r15+, r8\n\t"					\
+		"lds.l	@r15+, pr\n\t"					\
+		"ldc.l	@r15+, gbr\n\t"					\
+		: "=z" (__last)						\
+		: "r" (__ts1), "r" (__ts2), "r" (__ts4),		\
+		  "r" (__ts5), "r" (__ts6), "r" (__ts7)			\
+		: "r3", "t");						\
+									\
+	last = __last;							\
+} while (0)
+
+#define __uses_jump_to_uncached __attribute__ ((__section__ (".uncached.text")))
+
+/*
+ * Jump to uncached area.
+ * When handling TLB or caches, we need to do it from an uncached area.
+ */
+#define jump_to_uncached()			\
+do {						\
+	unsigned long __dummy;			\
+						\
+	__asm__ __volatile__(			\
+		"mova	1f, %0\n\t"		\
+		"add	%1, %0\n\t"		\
+		"jmp	@%0\n\t"		\
+		" nop\n\t"			\
+		".balign 4\n"			\
+		"1:"				\
+		: "=&z" (__dummy)		\
+		: "r" (cached_to_uncached));	\
+} while (0)
+
+/*
+ * Back to cached area.
+ */
+#define back_to_cached()				\
+do {							\
+	unsigned long __dummy;				\
+	ctrl_barrier();					\
+	__asm__ __volatile__(				\
+		"mov.l	1f, %0\n\t"			\
+		"jmp	@%0\n\t"			\
+		" nop\n\t"				\
+		".balign 4\n"				\
+		"1:	.long 2f\n"			\
+		"2:"					\
+		: "=&r" (__dummy));			\
+} while (0)
+
+int handle_unaligned_access(opcode_t instruction, struct pt_regs *regs,
+			    struct mem_access *ma);
+
+#endif /* __ASM_SH_SYSTEM_32_H */
diff --git a/arch/sh/include/asm/system_64.h b/arch/sh/include/asm/system_64.h
new file mode 100644
index 000000000000..943acf5ea07c
--- /dev/null
+++ b/arch/sh/include/asm/system_64.h
@@ -0,0 +1,40 @@
+#ifndef __ASM_SH_SYSTEM_64_H
+#define __ASM_SH_SYSTEM_64_H
+
+/*
+ * include/asm-sh/system_64.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003  Paul Mundt
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <asm/processor.h>
+
+/*
+ *	switch_to() should switch tasks to task nr n, first
+ */
+struct task_struct *sh64_switch_to(struct task_struct *prev,
+				   struct thread_struct *prev_thread,
+				   struct task_struct *next,
+				   struct thread_struct *next_thread);
+
+#define switch_to(prev,next,last)				\
+do {								\
+	if (last_task_used_math != next) {			\
+		struct pt_regs *regs = next->thread.uregs;	\
+		if (regs) regs->sr |= SR_FD;			\
+	}							\
+	last = sh64_switch_to(prev, &prev->thread, next,	\
+			      &next->thread);			\
+} while (0)
+
+#define __uses_jump_to_uncached
+
+#define jump_to_uncached()	do { } while (0)
+#define back_to_cached()	do { } while (0)
+
+#endif /* __ASM_SH_SYSTEM_64_H */
diff --git a/arch/sh/include/asm/systemh7751.h b/arch/sh/include/asm/systemh7751.h
new file mode 100644
index 000000000000..4161122c84ef
--- /dev/null
+++ b/arch/sh/include/asm/systemh7751.h
@@ -0,0 +1,71 @@
+#ifndef __ASM_SH_SYSTEMH_7751SYSTEMH_H
+#define __ASM_SH_SYSTEMH_7751SYSTEMH_H
+
+/*
+ * linux/include/asm-sh/systemh/7751systemh.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SystemH support
+
+ * Modified for 7751 SystemH by
+ * Jonathan Short, 2002.
+ */
+
+/* Box specific addresses.  */
+
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0x01000000	/* EPROM */
+#define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0x12000000
+#define PA_EXT4_SIZE	0x02000000
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+#define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
+
+#define PA_DIPSW0	0xb9000000	/* Dip switch 5,6 */
+#define PA_DIPSW1	0xb9000002	/* Dip switch 7,8 */
+#define PA_LED		0xba000000	/* LED */
+#define	PA_BCR		0xbb000000	/* FPGA on the MS7751SE01 */
+
+#define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
+#define MRSHPC_MODE     (PA_MRSHPC + 4)
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define BCR_ILCRA	(PA_BCR + 0)
+#define BCR_ILCRB	(PA_BCR + 2)
+#define BCR_ILCRC	(PA_BCR + 4)
+#define BCR_ILCRD	(PA_BCR + 6)
+#define BCR_ILCRE	(PA_BCR + 8)
+#define BCR_ILCRF	(PA_BCR + 10)
+#define BCR_ILCRG	(PA_BCR + 12)
+
+#define IRQ_79C973	13
+
+#define __IO_PREFIX	sh7751systemh
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */
diff --git a/arch/sh/include/asm/termbits.h b/arch/sh/include/asm/termbits.h
new file mode 100644
index 000000000000..77db116948cf
--- /dev/null
+++ b/arch/sh/include/asm/termbits.h
@@ -0,0 +1,198 @@
+#ifndef __ASM_SH_TERMBITS_H
+#define __ASM_SH_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define	   BOTHER 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000		/* input baud rate */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+#define IBSHIFT	16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* __ASM_SH_TERMBITS_H */
diff --git a/arch/sh/include/asm/termios.h b/arch/sh/include/asm/termios.h
new file mode 100644
index 000000000000..0a8c793c76f2
--- /dev/null
+++ b/arch/sh/include/asm/termios.h
@@ -0,0 +1,90 @@
+#ifndef __ASM_SH_TERMIOS_H
+#define __ASM_SH_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* __ASM_SH_TERMIOS_H */
diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h
new file mode 100644
index 000000000000..0a894cafb1dd
--- /dev/null
+++ b/arch/sh/include/asm/thread_info.h
@@ -0,0 +1,162 @@
+#ifndef __ASM_SH_THREAD_INFO_H
+#define __ASM_SH_THREAD_INFO_H
+
+/* SuperH version
+ * Copyright (C) 2002  Niibe Yutaka
+ *
+ * The copyright of original i386 version is:
+ *
+ *  Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ *  - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+#ifdef __KERNEL__
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	__u32			cpu;
+	int			preempt_count; /* 0 => preemptable, <0 => BUG */
+	mm_segment_t		addr_limit;	/* thread address space */
+	struct restart_block	restart_block;
+	unsigned long		previous_sp;	/* sp of previous stack in case
+						   of nested IRQ stacks */
+	__u8			supervisor_stack[0];
+};
+
+#endif
+
+#define PREEMPT_ACTIVE		0x10000000
+
+#if defined(CONFIG_4KSTACKS)
+#define THREAD_SIZE_ORDER	(0)
+#elif defined(CONFIG_PAGE_SIZE_4KB)
+#define THREAD_SIZE_ORDER	(1)
+#elif defined(CONFIG_PAGE_SIZE_8KB)
+#define THREAD_SIZE_ORDER	(1)
+#elif defined(CONFIG_PAGE_SIZE_16KB)
+#define THREAD_SIZE_ORDER	(0)
+#elif defined(CONFIG_PAGE_SIZE_64KB)
+#define THREAD_SIZE_ORDER	(0)
+#else
+#error "Unknown thread size"
+#endif
+
+#define THREAD_SIZE	(PAGE_SIZE << THREAD_SIZE_ORDER)
+#define STACK_WARN	(THREAD_SIZE >> 3)
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#ifndef __ASSEMBLY__
+#define INIT_THREAD_INFO(tsk)			\
+{						\
+	.task		= &tsk,			\
+	.exec_domain	= &default_exec_domain,	\
+	.flags		= 0,			\
+	.cpu		= 0,			\
+	.preempt_count	= 1,			\
+	.addr_limit	= KERNEL_DS,		\
+	.restart_block	= {			\
+		.fn = do_no_restart_syscall,	\
+	},					\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the current stack pointer from C */
+register unsigned long current_stack_pointer asm("r15") __used;
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+	struct thread_info *ti;
+#if defined(CONFIG_SUPERH64)
+	__asm__ __volatile__ ("getcon	cr17, %0" : "=r" (ti));
+#elif defined(CONFIG_CPU_HAS_SR_RB)
+	__asm__ __volatile__ ("stc	r7_bank, %0" : "=r" (ti));
+#else
+	unsigned long __dummy;
+
+	__asm__ __volatile__ (
+		"mov	r15, %0\n\t"
+		"and	%1, %0\n\t"
+		: "=&r" (ti), "=r" (__dummy)
+		: "1" (~(THREAD_SIZE - 1))
+		: "memory");
+#endif
+
+	return ti;
+}
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+/* thread information allocation */
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(ti)	kzalloc(THREAD_SIZE, GFP_KERNEL)
+#else
+#define alloc_thread_info(ti)	kmalloc(THREAD_SIZE, GFP_KERNEL)
+#endif
+#define free_thread_info(ti)	kfree(ti)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_SIGPENDING		1	/* signal pending */
+#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
+#define TIF_RESTORE_SIGMASK	3	/* restore signal mask in do_signal() */
+#define TIF_SINGLESTEP		4	/* singlestepping active */
+#define TIF_SYSCALL_AUDIT	5	/* syscall auditing active */
+#define TIF_SECCOMP		6	/* secure computing */
+#define TIF_NOTIFY_RESUME	7	/* callback before returning to user */
+#define TIF_USEDFPU		16	/* FPU was used by this task this quantum (SMP) */
+#define TIF_POLLING_NRFLAG	17	/* true if poll_idle() is polling TIF_NEED_RESCHED */
+#define TIF_MEMDIE		18
+#define TIF_FREEZE		19	/* Freezing for suspend */
+
+#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
+#define _TIF_RESTORE_SIGMASK	(1 << TIF_RESTORE_SIGMASK)
+#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
+#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)
+#define _TIF_SECCOMP		(1 << TIF_SECCOMP)
+#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
+#define _TIF_USEDFPU		(1 << TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE		(1 << TIF_FREEZE)
+
+/*
+ * _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within a byte, or we
+ * blow the tst immediate size constraints and need to fix up
+ * arch/sh/kernel/entry-common.S.
+ */
+
+/* work to do in syscall trace */
+#define _TIF_WORK_SYSCALL_MASK	(_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
+				 _TIF_SYSCALL_AUDIT | _TIF_SECCOMP)
+
+/* work to do on any return to u-space */
+#define _TIF_ALLWORK_MASK	(_TIF_SYSCALL_TRACE | _TIF_SIGPENDING      | \
+				 _TIF_NEED_RESCHED  | _TIF_SYSCALL_AUDIT   | \
+				 _TIF_SINGLESTEP    | _TIF_RESTORE_SIGMASK | \
+				 _TIF_NOTIFY_RESUME)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK		(_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \
+				 _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP))
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_THREAD_INFO_H */
diff --git a/arch/sh/include/asm/timer.h b/arch/sh/include/asm/timer.h
new file mode 100644
index 000000000000..a7ca3a195bb5
--- /dev/null
+++ b/arch/sh/include/asm/timer.h
@@ -0,0 +1,44 @@
+#ifndef __ASM_SH_TIMER_H
+#define __ASM_SH_TIMER_H
+
+#include <linux/sysdev.h>
+#include <linux/clocksource.h>
+#include <cpu/timer.h>
+
+struct sys_timer_ops {
+	int (*init)(void);
+	int (*start)(void);
+	int (*stop)(void);
+	cycle_t (*read)(void);
+#ifndef CONFIG_GENERIC_TIME
+	unsigned long (*get_offset)(void);
+#endif
+};
+
+struct sys_timer {
+	const char		*name;
+
+	struct sys_device	dev;
+	struct sys_timer_ops	*ops;
+};
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer;
+extern struct sys_timer *sys_timer;
+
+#ifndef CONFIG_GENERIC_TIME
+static inline unsigned long get_timer_offset(void)
+{
+	return sys_timer->ops->get_offset();
+}
+#endif
+
+/* arch/sh/kernel/timers/timer.c */
+struct sys_timer *get_sys_timer(void);
+
+/* arch/sh/kernel/time.c */
+void handle_timer_tick(void);
+extern unsigned long sh_hpt_frequency;
+
+#endif /* __ASM_SH_TIMER_H */
diff --git a/arch/sh/include/asm/timex.h b/arch/sh/include/asm/timex.h
new file mode 100644
index 000000000000..a873e24113cf
--- /dev/null
+++ b/arch/sh/include/asm/timex.h
@@ -0,0 +1,18 @@
+/*
+ * linux/include/asm-sh/timex.h
+ *
+ * sh architecture timex specifications
+ */
+#ifndef __ASM_SH_TIMEX_H
+#define __ASM_SH_TIMEX_H
+
+#define CLOCK_TICK_RATE		(CONFIG_SH_PCLK_FREQ / 4) /* Underlying HZ */
+
+typedef unsigned long long cycles_t;
+
+static __inline__ cycles_t get_cycles (void)
+{
+	return 0;
+}
+
+#endif /* __ASM_SH_TIMEX_H */
diff --git a/arch/sh/include/asm/titan.h b/arch/sh/include/asm/titan.h
new file mode 100644
index 000000000000..03f3583c8918
--- /dev/null
+++ b/arch/sh/include/asm/titan.h
@@ -0,0 +1,17 @@
+/*
+ * Platform defintions for Titan
+ */
+#ifndef _ASM_SH_TITAN_H
+#define _ASM_SH_TITAN_H
+
+#define __IO_PREFIX titan
+#include <asm/io_generic.h>
+
+/* IRQ assignments */
+#define TITAN_IRQ_WAN		2	/* eth0 (WAN) */
+#define TITAN_IRQ_LAN		5	/* eth1 (LAN) */
+#define TITAN_IRQ_MPCIA		8	/* mPCI A */
+#define TITAN_IRQ_MPCIB		11	/* mPCI B */
+#define TITAN_IRQ_USB		11	/* USB */
+
+#endif /* __ASM_SH_TITAN_H */
diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h
new file mode 100644
index 000000000000..88ff1ae8a6b8
--- /dev/null
+++ b/arch/sh/include/asm/tlb.h
@@ -0,0 +1,27 @@
+#ifndef __ASM_SH_TLB_H
+#define __ASM_SH_TLB_H
+
+#ifdef CONFIG_SUPERH64
+# include "tlb_64.h"
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define tlb_start_vma(tlb, vma) \
+	flush_cache_range(vma, vma->vm_start, vma->vm_end)
+
+#define tlb_end_vma(tlb, vma)	\
+	flush_tlb_range(vma, vma->vm_start, vma->vm_end)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address)	do { } while (0)
+
+/*
+ * Flush whole TLBs for MM
+ */
+#define tlb_flush(tlb)				flush_tlb_mm((tlb)->mm)
+
+#include <linux/pagemap.h>
+#include <asm-generic/tlb.h>
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_TLB_H */
diff --git a/arch/sh/include/asm/tlb_64.h b/arch/sh/include/asm/tlb_64.h
new file mode 100644
index 000000000000..ef0ae2a28f23
--- /dev/null
+++ b/arch/sh/include/asm/tlb_64.h
@@ -0,0 +1,71 @@
+/*
+ * include/asm-sh/tlb_64.h
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_TLB_64_H
+#define __ASM_SH_TLB_64_H
+
+/* ITLB defines */
+#define ITLB_FIXED	0x00000000	/* First fixed ITLB, see head.S */
+#define ITLB_LAST_VAR_UNRESTRICTED	0x000003F0	/* Last ITLB */
+
+/* DTLB defines */
+#define DTLB_FIXED	0x00800000	/* First fixed DTLB, see head.S */
+#define DTLB_LAST_VAR_UNRESTRICTED	0x008003F0	/* Last DTLB */
+
+#ifndef __ASSEMBLY__
+
+/**
+ * for_each_dtlb_entry - Iterate over free (non-wired) DTLB entries
+ *
+ * @tlb:	TLB entry
+ */
+#define for_each_dtlb_entry(tlb)		\
+	for (tlb  = cpu_data->dtlb.first;	\
+	     tlb <= cpu_data->dtlb.last;	\
+	     tlb += cpu_data->dtlb.step)
+
+/**
+ * for_each_itlb_entry - Iterate over free (non-wired) ITLB entries
+ *
+ * @tlb:	TLB entry
+ */
+#define for_each_itlb_entry(tlb)		\
+	for (tlb  = cpu_data->itlb.first;	\
+	     tlb <= cpu_data->itlb.last;	\
+	     tlb += cpu_data->itlb.step)
+
+/**
+ * __flush_tlb_slot - Flushes TLB slot @slot.
+ *
+ * @slot:	Address of TLB slot.
+ */
+static inline void __flush_tlb_slot(unsigned long long slot)
+{
+	__asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot));
+}
+
+#ifdef CONFIG_MMU
+/* arch/sh64/mm/tlb.c */
+int sh64_tlb_init(void);
+unsigned long long sh64_next_free_dtlb_entry(void);
+unsigned long long sh64_get_wired_dtlb_entry(void);
+int sh64_put_wired_dtlb_entry(unsigned long long entry);
+void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr,
+			 unsigned long asid, unsigned long paddr);
+void sh64_teardown_tlb_slot(unsigned long long config_addr);
+#else
+#define sh64_tlb_init()					do { } while (0)
+#define sh64_next_free_dtlb_entry()			(0)
+#define sh64_get_wired_dtlb_entry()			(0)
+#define sh64_put_wired_dtlb_entry(entry)		do { } while (0)
+#define sh64_setup_tlb_slot(conf, virt, asid, phys)	do { } while (0)
+#define sh64_teardown_tlb_slot(addr)			do { } while (0)
+#endif /* CONFIG_MMU */
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_TLB_64_H */
diff --git a/arch/sh/include/asm/tlbflush.h b/arch/sh/include/asm/tlbflush.h
new file mode 100644
index 000000000000..e0ac97221ae6
--- /dev/null
+++ b/arch/sh/include/asm/tlbflush.h
@@ -0,0 +1,49 @@
+#ifndef __ASM_SH_TLBFLUSH_H
+#define __ASM_SH_TLBFLUSH_H
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ */
+extern void local_flush_tlb_all(void);
+extern void local_flush_tlb_mm(struct mm_struct *mm);
+extern void local_flush_tlb_range(struct vm_area_struct *vma,
+				  unsigned long start,
+				  unsigned long end);
+extern void local_flush_tlb_page(struct vm_area_struct *vma,
+				 unsigned long page);
+extern void local_flush_tlb_kernel_range(unsigned long start,
+					 unsigned long end);
+extern void local_flush_tlb_one(unsigned long asid, unsigned long page);
+
+#ifdef CONFIG_SMP
+
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+			    unsigned long end);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+extern void flush_tlb_one(unsigned long asid, unsigned long page);
+
+#else
+
+#define flush_tlb_all()			local_flush_tlb_all()
+#define flush_tlb_mm(mm)		local_flush_tlb_mm(mm)
+#define flush_tlb_page(vma, page)	local_flush_tlb_page(vma, page)
+#define flush_tlb_one(asid, page)	local_flush_tlb_one(asid, page)
+
+#define flush_tlb_range(vma, start, end)	\
+	local_flush_tlb_range(vma, start, end)
+
+#define flush_tlb_kernel_range(start, end)	\
+	local_flush_tlb_kernel_range(start, end)
+
+#endif /* CONFIG_SMP */
+
+#endif /* __ASM_SH_TLBFLUSH_H */
diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h
new file mode 100644
index 000000000000..95f0085e098a
--- /dev/null
+++ b/arch/sh/include/asm/topology.h
@@ -0,0 +1,47 @@
+#ifndef _ASM_SH_TOPOLOGY_H
+#define _ASM_SH_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+/* sched_domains SD_NODE_INIT for sh machines */
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.span			= CPU_MASK_NONE,	\
+	.parent			= NULL,			\
+	.child			= NULL,			\
+	.groups			= NULL,			\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 2,			\
+	.busy_idx		= 3,			\
+	.idle_idx		= 2,			\
+	.newidle_idx		= 2,			\
+	.wake_idx		= 1,			\
+	.forkexec_idx		= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_FORK	\
+				| SD_BALANCE_EXEC	\
+				| SD_SERIALIZE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+	.nr_balance_failed	= 0,			\
+}
+
+#define cpu_to_node(cpu)	((void)(cpu),0)
+#define parent_node(node)	((void)(node),0)
+
+#define node_to_cpumask(node)	((void)node, cpu_online_map)
+#define node_to_first_cpu(node)	((void)(node),0)
+
+#define pcibus_to_node(bus)	((void)(bus), -1)
+#define pcibus_to_cpumask(bus)	(pcibus_to_node(bus) == -1 ? \
+					CPU_MASK_ALL : \
+					node_to_cpumask(pcibus_to_node(bus)) \
+				)
+#endif
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_SH_TOPOLOGY_H */
diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h
new file mode 100644
index 000000000000..beea4e6f8dfd
--- /dev/null
+++ b/arch/sh/include/asm/types.h
@@ -0,0 +1,35 @@
+#ifndef __ASM_SH_TYPES_H
+#define __ASM_SH_TYPES_H
+
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+
+#ifdef CONFIG_SUPERH32
+typedef u16 opcode_t;
+#else
+typedef u32 opcode_t;
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_TYPES_H */
diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h
new file mode 100644
index 000000000000..075848f43b6a
--- /dev/null
+++ b/arch/sh/include/asm/uaccess.h
@@ -0,0 +1,258 @@
+#ifndef __ASM_SH_UACCESS_H
+#define __ASM_SH_UACCESS_H
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <asm/segment.h>
+
+#define VERIFY_READ    0
+#define VERIFY_WRITE   1
+
+#define __addr_ok(addr) \
+	((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg)
+
+/*
+ * __access_ok: Check if address with size is OK or not.
+ *
+ * Uhhuh, this needs 33-bit arithmetic. We have a carry..
+ *
+ * sum := addr + size;  carry? --> flag = true;
+ * if (sum >= addr_limit) flag = true;
+ */
+#define __access_ok(addr, size)		\
+	(__addr_ok((addr) + (size)))
+#define access_ok(type, addr, size)	\
+	(__chk_user_ptr(addr),		\
+	 __access_ok((unsigned long __force)(addr), (size)))
+
+/*
+ * Uh, these should become the main single-value transfer routines ...
+ * They automatically use the right size if we just have the right
+ * pointer type ...
+ *
+ * As SuperH uses the same address space for kernel and user data, we
+ * can just do these as direct assignments.
+ *
+ * Careful to not
+ * (a) re-use the arguments for side effects (sizeof is ok)
+ * (b) require any knowledge of processes at this stage
+ */
+#define put_user(x,ptr)		__put_user_check((x), (ptr), sizeof(*(ptr)))
+#define get_user(x,ptr)		__get_user_check((x), (ptr), sizeof(*(ptr)))
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr)	__put_user_nocheck((x), (ptr), sizeof(*(ptr)))
+#define __get_user(x,ptr)	__get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+#define __get_user_nocheck(x,ptr,size)				\
+({								\
+	long __gu_err;						\
+	unsigned long __gu_val;					\
+	const __typeof__(*(ptr)) __user *__gu_addr = (ptr);	\
+	__chk_user_ptr(ptr);					\
+	__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;			\
+	__gu_err;						\
+})
+
+#define __get_user_check(x,ptr,size)					\
+({									\
+	long __gu_err = -EFAULT;					\
+	unsigned long __gu_val = 0;					\
+	const __typeof__(*(ptr)) *__gu_addr = (ptr);			\
+	if (likely(access_ok(VERIFY_READ, __gu_addr, (size))))		\
+		__get_user_size(__gu_val, __gu_addr, (size), __gu_err);	\
+	(x) = (__typeof__(*(ptr)))__gu_val;				\
+	__gu_err;							\
+})
+
+#define __put_user_nocheck(x,ptr,size)				\
+({								\
+	long __pu_err;						\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	__typeof__(*(ptr)) __pu_val = x;			\
+	__chk_user_ptr(ptr);					\
+	__put_user_size(__pu_val, __pu_addr, (size), __pu_err);	\
+	__pu_err;						\
+})
+
+#define __put_user_check(x,ptr,size)				\
+({								\
+	long __pu_err = -EFAULT;				\
+	__typeof__(*(ptr)) __user *__pu_addr = (ptr);		\
+	__typeof__(*(ptr)) __pu_val = x;			\
+	if (likely(access_ok(VERIFY_WRITE, __pu_addr, size)))	\
+		__put_user_size(__pu_val, __pu_addr, (size),	\
+				__pu_err);			\
+	__pu_err;						\
+})
+
+#ifdef CONFIG_SUPERH32
+# include "uaccess_32.h"
+#else
+# include "uaccess_64.h"
+#endif
+
+/* Generic arbitrary sized copy.  */
+/* Return the number of bytes NOT copied */
+__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
+
+static __always_inline unsigned long
+__copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	return __copy_user(to, (__force void *)from, n);
+}
+
+static __always_inline unsigned long __must_check
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	return __copy_user((__force void *)to, from, n);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+/*
+ * Clear the area and return remaining number of bytes
+ * (on failure.  Usually it's 0.)
+ */
+__kernel_size_t __clear_user(void *addr, __kernel_size_t size);
+
+#define clear_user(addr,n)						\
+({									\
+	void __user * __cl_addr = (addr);				\
+	unsigned long __cl_size = (n);					\
+									\
+	if (__cl_size && access_ok(VERIFY_WRITE,			\
+		((unsigned long)(__cl_addr)), __cl_size))		\
+		__cl_size = __clear_user(__cl_addr, __cl_size);		\
+									\
+	__cl_size;							\
+})
+
+/**
+ * strncpy_from_user: - Copy a NUL terminated string from userspace.
+ * @dst:   Destination address, in kernel space.  This buffer must be at
+ *         least @count bytes long.
+ * @src:   Source address, in user space.
+ * @count: Maximum number of bytes to copy, including the trailing NUL.
+ *
+ * Copies a NUL-terminated string from userspace to kernel space.
+ *
+ * On success, returns the length of the string (not including the trailing
+ * NUL).
+ *
+ * If access to userspace fails, returns -EFAULT (some data may have been
+ * copied).
+ *
+ * If @count is smaller than the length of the string, copies @count bytes
+ * and returns @count.
+ */
+#define strncpy_from_user(dest,src,count)				\
+({									\
+	unsigned long __sfu_src = (unsigned long)(src);			\
+	int __sfu_count = (int)(count);					\
+	long __sfu_res = -EFAULT;					\
+									\
+	if (__access_ok(__sfu_src, __sfu_count))			\
+		__sfu_res = __strncpy_from_user((unsigned long)(dest),	\
+				__sfu_src, __sfu_count);		\
+									\
+	__sfu_res;							\
+})
+
+static inline unsigned long
+copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	unsigned long __copy_from = (unsigned long) from;
+	__kernel_size_t __copy_size = (__kernel_size_t) n;
+
+	if (__copy_size && __access_ok(__copy_from, __copy_size))
+		return __copy_user(to, from, __copy_size);
+
+	return __copy_size;
+}
+
+static inline unsigned long
+copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	unsigned long __copy_to = (unsigned long) to;
+	__kernel_size_t __copy_size = (__kernel_size_t) n;
+
+	if (__copy_size && __access_ok(__copy_to, __copy_size))
+		return __copy_user(to, from, __copy_size);
+
+	return __copy_size;
+}
+
+/**
+ * strnlen_user: - Get the size of a string in user space.
+ * @s: The string to measure.
+ * @n: The maximum valid length
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ * If the string is too long, returns a value greater than @n.
+ */
+static inline long strnlen_user(const char __user *s, long n)
+{
+	if (!__addr_ok(s))
+		return 0;
+	else
+		return __strnlen_user(s, n);
+}
+
+/**
+ * strlen_user: - Get the size of a string in user space.
+ * @str: The string to measure.
+ *
+ * Context: User context only.  This function may sleep.
+ *
+ * Get the size of a NUL-terminated string in user space.
+ *
+ * Returns the size of the string INCLUDING the terminating NUL.
+ * On exception, returns 0.
+ *
+ * If there is a limit on the length of a valid string, you may wish to
+ * consider using strnlen_user() instead.
+ */
+#define strlen_user(str)	strnlen_user(str, ~0UL >> 1)
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry {
+	unsigned long insn, fixup;
+};
+
+#if defined(CONFIG_SUPERH64) && defined(CONFIG_MMU)
+#define ARCH_HAS_SEARCH_EXTABLE
+#endif
+
+int fixup_exception(struct pt_regs *regs);
+/* Returns 0 if exception not found and fixup.unit otherwise.  */
+unsigned long search_exception_table(unsigned long addr);
+const struct exception_table_entry *search_exception_tables(unsigned long addr);
+
+
+#endif /* __ASM_SH_UACCESS_H */
diff --git a/arch/sh/include/asm/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h
new file mode 100644
index 000000000000..ae0d24f6653f
--- /dev/null
+++ b/arch/sh/include/asm/uaccess_32.h
@@ -0,0 +1,248 @@
+/*
+ * User space memory access functions
+ *
+ * Copyright (C) 1999, 2002  Niibe Yutaka
+ * Copyright (C) 2003 - 2008  Paul Mundt
+ *
+ *  Based on:
+ *     MIPS implementation version 1.15 by
+ *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
+ *     and i386 version.
+ */
+#ifndef __ASM_SH_UACCESS_32_H
+#define __ASM_SH_UACCESS_32_H
+
+#define __get_user_size(x,ptr,size,retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	case 1:							\
+		__get_user_asm(x, ptr, retval, "b");		\
+		break;						\
+	case 2:							\
+		__get_user_asm(x, ptr, retval, "w");		\
+		break;						\
+	case 4:							\
+		__get_user_asm(x, ptr, retval, "l");		\
+		break;						\
+	default:						\
+		__get_user_unknown();				\
+		break;						\
+	}							\
+} while (0)
+
+#ifdef CONFIG_MMU
+#define __get_user_asm(x, addr, err, insn) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov." insn "	%2, %1\n\t" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"mov	#0, %1\n\t" \
+	"mov.l	4f, %0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3, %0\n\t" \
+	".balign	4\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".previous" \
+	:"=&r" (err), "=&r" (x) \
+	:"m" (__m(addr)), "i" (-EFAULT), "0" (err)); })
+#else
+#define __get_user_asm(x, addr, err, insn)		\
+do {							\
+	__asm__ __volatile__ (				\
+		"mov." insn "	%1, %0\n\t"		\
+		: "=&r" (x)				\
+		: "m" (__m(addr))			\
+	);						\
+} while (0)
+#endif /* CONFIG_MMU */
+
+extern void __get_user_unknown(void);
+
+#define __put_user_size(x,ptr,size,retval)		\
+do {							\
+	retval = 0;					\
+	switch (size) {					\
+	case 1:						\
+		__put_user_asm(x, ptr, retval, "b");	\
+		break;					\
+	case 2:						\
+		__put_user_asm(x, ptr, retval, "w");	\
+		break;					\
+	case 4:						\
+		__put_user_asm(x, ptr, retval, "l");	\
+		break;					\
+	case 8:						\
+		__put_user_u64(x, ptr, retval);		\
+		break;					\
+	default:					\
+		__put_user_unknown();			\
+	}						\
+} while (0)
+
+#ifdef CONFIG_MMU
+#define __put_user_asm(x, addr, err, insn)			\
+do {								\
+	__asm__ __volatile__ (					\
+		"1:\n\t"					\
+		"mov." insn "	%1, %2\n\t"			\
+		"2:\n"						\
+		".section	.fixup,\"ax\"\n"		\
+		"3:\n\t"					\
+		"mov.l	4f, %0\n\t"				\
+		"jmp	@%0\n\t"				\
+		" mov	%3, %0\n\t"				\
+		".balign	4\n"				\
+		"4:	.long	2b\n\t"				\
+		".previous\n"					\
+		".section	__ex_table,\"a\"\n\t"		\
+		".long	1b, 3b\n\t"				\
+		".previous"					\
+		: "=&r" (err)					\
+		: "r" (x), "m" (__m(addr)), "i" (-EFAULT),	\
+		  "0" (err)					\
+		: "memory"					\
+	);							\
+} while (0)
+#else
+#define __put_user_asm(x, addr, err, insn)		\
+do {							\
+	__asm__ __volatile__ (				\
+		"mov." insn "	%0, %1\n\t"		\
+		: /* no outputs */			\
+		: "r" (x), "m" (__m(addr))		\
+		: "memory"				\
+	);						\
+} while (0)
+#endif /* CONFIG_MMU */
+
+#if defined(CONFIG_CPU_LITTLE_ENDIAN)
+#define __put_user_u64(val,addr,retval) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov.l	%R1,%2\n\t" \
+	"mov.l	%S1,%T2\n\t" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"mov.l	4f,%0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3,%0\n\t" \
+	".balign	4\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".previous" \
+	: "=r" (retval) \
+	: "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
+        : "memory"); })
+#else
+#define __put_user_u64(val,addr,retval) \
+({ \
+__asm__ __volatile__( \
+	"1:\n\t" \
+	"mov.l	%S1,%2\n\t" \
+	"mov.l	%R1,%T2\n\t" \
+	"2:\n" \
+	".section	.fixup,\"ax\"\n" \
+	"3:\n\t" \
+	"mov.l	4f,%0\n\t" \
+	"jmp	@%0\n\t" \
+	" mov	%3,%0\n\t" \
+	".balign	4\n" \
+	"4:	.long	2b\n\t" \
+	".previous\n" \
+	".section	__ex_table,\"a\"\n\t" \
+	".long	1b, 3b\n\t" \
+	".previous" \
+	: "=r" (retval) \
+	: "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \
+        : "memory"); })
+#endif
+
+extern void __put_user_unknown(void);
+
+static inline int
+__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
+{
+	__kernel_size_t res;
+	unsigned long __dummy, _d, _s, _c;
+
+	__asm__ __volatile__(
+		"9:\n"
+		"mov.b	@%2+, %1\n\t"
+		"cmp/eq	#0, %1\n\t"
+		"bt/s	2f\n"
+		"1:\n"
+		"mov.b	%1, @%3\n\t"
+		"dt	%4\n\t"
+		"bf/s	9b\n\t"
+		" add	#1, %3\n\t"
+		"2:\n\t"
+		"sub	%4, %0\n"
+		"3:\n"
+		".section .fixup,\"ax\"\n"
+		"4:\n\t"
+		"mov.l	5f, %1\n\t"
+		"jmp	@%1\n\t"
+		" mov	%9, %0\n\t"
+		".balign 4\n"
+		"5:	.long 3b\n"
+		".previous\n"
+		".section __ex_table,\"a\"\n"
+		"	.balign 4\n"
+		"	.long 9b,4b\n"
+		".previous"
+		: "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c)
+		: "0" (__count), "2" (__src), "3" (__dest), "4" (__count),
+		  "i" (-EFAULT)
+		: "memory", "t");
+
+	return res;
+}
+
+/*
+ * Return the size of a string (including the ending 0 even when we have
+ * exceeded the maximum string length).
+ */
+static inline long __strnlen_user(const char __user *__s, long __n)
+{
+	unsigned long res;
+	unsigned long __dummy;
+
+	__asm__ __volatile__(
+		"1:\t"
+		"mov.b	@(%0,%3), %1\n\t"
+		"cmp/eq	%4, %0\n\t"
+		"bt/s	2f\n\t"
+		" add	#1, %0\n\t"
+		"tst	%1, %1\n\t"
+		"bf	1b\n\t"
+		"2:\n"
+		".section .fixup,\"ax\"\n"
+		"3:\n\t"
+		"mov.l	4f, %1\n\t"
+		"jmp	@%1\n\t"
+		" mov	#0, %0\n"
+		".balign 4\n"
+		"4:	.long 2b\n"
+		".previous\n"
+		".section __ex_table,\"a\"\n"
+		"	.balign 4\n"
+		"	.long 1b,3b\n"
+		".previous"
+		: "=z" (res), "=&r" (__dummy)
+		: "0" (0), "r" (__s), "r" (__n)
+		: "t");
+	return res;
+}
+
+#endif /* __ASM_SH_UACCESS_32_H */
diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h
new file mode 100644
index 000000000000..81b3d515fcb3
--- /dev/null
+++ b/arch/sh/include/asm/uaccess_64.h
@@ -0,0 +1,79 @@
+#ifndef __ASM_SH_UACCESS_64_H
+#define __ASM_SH_UACCESS_64_H
+
+/*
+ * include/asm-sh/uaccess_64.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * User space memory access functions
+ *
+ * Copyright (C) 1999  Niibe Yutaka
+ *
+ *  Based on:
+ *     MIPS implementation version 1.15 by
+ *              Copyright (C) 1996, 1997, 1998 by Ralf Baechle
+ *     and i386 version.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#define __get_user_size(x,ptr,size,retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	case 1:							\
+		retval = __get_user_asm_b(x, ptr);		\
+		break;						\
+	case 2:							\
+		retval = __get_user_asm_w(x, ptr);		\
+		break;						\
+	case 4:							\
+		retval = __get_user_asm_l(x, ptr);		\
+		break;						\
+	case 8:							\
+		retval = __get_user_asm_q(x, ptr);		\
+		break;						\
+	default:						\
+		__get_user_unknown();				\
+		break;						\
+	}							\
+} while (0)
+
+extern long __get_user_asm_b(void *, long);
+extern long __get_user_asm_w(void *, long);
+extern long __get_user_asm_l(void *, long);
+extern long __get_user_asm_q(void *, long);
+extern void __get_user_unknown(void);
+
+#define __put_user_size(x,ptr,size,retval)			\
+do {								\
+	retval = 0;						\
+	switch (size) {						\
+	case 1:							\
+		retval = __put_user_asm_b(x, ptr);		\
+		break;						\
+	case 2:							\
+		retval = __put_user_asm_w(x, ptr);		\
+		break;						\
+	case 4:							\
+		retval = __put_user_asm_l(x, ptr);		\
+		break;						\
+	case 8:							\
+		retval = __put_user_asm_q(x, ptr);		\
+		break;						\
+	default:						\
+		__put_user_unknown();				\
+	}							\
+} while (0)
+
+extern long __put_user_asm_b(void *, long);
+extern long __put_user_asm_w(void *, long);
+extern long __put_user_asm_l(void *, long);
+extern long __put_user_asm_q(void *, long);
+extern void __put_user_unknown(void);
+
+#endif /* __ASM_SH_UACCESS_64_H */
diff --git a/arch/sh/include/asm/ubc.h b/arch/sh/include/asm/ubc.h
new file mode 100644
index 000000000000..a7b9028bbfbb
--- /dev/null
+++ b/arch/sh/include/asm/ubc.h
@@ -0,0 +1,64 @@
+/*
+ * include/asm-sh/ubc.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_UBC_H
+#define __ASM_SH_UBC_H
+#ifdef __KERNEL__
+
+#include <cpu/ubc.h>
+
+/* User Break Controller */
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+#define UBC_TYPE_SH7729	(current_cpu_data.type == CPU_SH7729)
+#else
+#define UBC_TYPE_SH7729	0
+#endif
+
+#define BAMR_ASID		(1 << 2)
+#define BAMR_NONE		0
+#define BAMR_10			0x1
+#define BAMR_12			0x2
+#define BAMR_ALL		0x3
+#define BAMR_16			0x8
+#define BAMR_20			0x9
+
+#define BBR_INST		(1 << 4)
+#define BBR_DATA		(2 << 4)
+#define BBR_READ		(1 << 2)
+#define BBR_WRITE		(2 << 2)
+#define BBR_BYTE		0x1
+#define BBR_HALF		0x2
+#define BBR_LONG		0x3
+#define BBR_QUAD		(1 << 6)	/* SH7750 */
+#define BBR_CPU			(1 << 6)	/* SH7709A,SH7729 */
+#define BBR_DMA			(2 << 6)	/* SH7709A,SH7729 */
+
+#define BRCR_CMFA		(1 << 15)
+#define BRCR_CMFB		(1 << 14)
+#define BRCR_PCTE		(1 << 11)
+#define BRCR_PCBA		(1 << 10)	/* 1: after execution */
+#define BRCR_DBEB		(1 << 7)
+#define BRCR_PCBB		(1 << 6)
+#define BRCR_SEQ		(1 << 3)
+#define BRCR_UBDE		(1 << 0)
+
+#ifndef __ASSEMBLY__
+/* arch/sh/kernel/cpu/ubc.S */
+extern void ubc_sleep(void);
+
+#ifdef CONFIG_UBC_WAKEUP
+extern void ubc_wakeup(void);
+#else
+#define ubc_wakeup()	do { } while (0)
+#endif
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_UBC_H */
diff --git a/arch/sh/include/asm/ucontext.h b/arch/sh/include/asm/ucontext.h
new file mode 100644
index 000000000000..202ef1d5a3c4
--- /dev/null
+++ b/arch/sh/include/asm/ucontext.h
@@ -0,0 +1,12 @@
+#ifndef __ASM_SH_UCONTEXT_H
+#define __ASM_SH_UCONTEXT_H
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* __ASM_SH_UCONTEXT_H */
diff --git a/arch/sh/include/asm/unaligned.h b/arch/sh/include/asm/unaligned.h
new file mode 100644
index 000000000000..c1641a01d50f
--- /dev/null
+++ b/arch/sh/include/asm/unaligned.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_SH_UNALIGNED_H
+#define _ASM_SH_UNALIGNED_H
+
+/* SH can't handle unaligned accesses. */
+#ifdef __LITTLE_ENDIAN__
+# include <linux/unaligned/le_struct.h>
+# include <linux/unaligned/be_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_le
+# define put_unaligned	__put_unaligned_le
+#else
+# include <linux/unaligned/be_struct.h>
+# include <linux/unaligned/le_byteshift.h>
+# include <linux/unaligned/generic.h>
+# define get_unaligned	__get_unaligned_be
+# define put_unaligned	__put_unaligned_be
+#endif
+
+#endif /* _ASM_SH_UNALIGNED_H */
diff --git a/arch/sh/include/asm/unistd.h b/arch/sh/include/asm/unistd.h
new file mode 100644
index 000000000000..65be656ead7d
--- /dev/null
+++ b/arch/sh/include/asm/unistd.h
@@ -0,0 +1,13 @@
+#ifdef __KERNEL__
+# ifdef CONFIG_SUPERH32
+#  include "unistd_32.h"
+# else
+#  include "unistd_64.h"
+# endif
+#else
+# ifdef __SH5__
+#  include "unistd_64.h"
+# else
+#  include "unistd_32.h"
+# endif
+#endif
diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h
new file mode 100644
index 000000000000..d52c000cf924
--- /dev/null
+++ b/arch/sh/include/asm/unistd_32.h
@@ -0,0 +1,384 @@
+#ifndef __ASM_SH_UNISTD_H
+#define __ASM_SH_UNISTD_H
+
+/*
+ * Copyright (C) 1999  Niibe Yutaka
+ */
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86old		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_vm86		166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_streams1		188	/* some people actually want it */
+#define __NR_streams2		189	/* some people actually want it */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+#define __NR_getdents64		220
+#define __NR_fcntl64		221
+/* 223 is unused */
+#define __NR_gettid		224
+#define __NR_readahead		225
+#define __NR_setxattr		226
+#define __NR_lsetxattr		227
+#define __NR_fsetxattr		228
+#define __NR_getxattr		229
+#define __NR_lgetxattr		230
+#define __NR_fgetxattr		231
+#define __NR_listxattr		232
+#define __NR_llistxattr		233
+#define __NR_flistxattr		234
+#define __NR_removexattr	235
+#define __NR_lremovexattr	236
+#define __NR_fremovexattr	237
+#define __NR_tkill		238
+#define __NR_sendfile64		239
+#define __NR_futex		240
+#define __NR_sched_setaffinity	241
+#define __NR_sched_getaffinity	242
+#define __NR_set_thread_area	243
+#define __NR_get_thread_area	244
+#define __NR_io_setup		245
+#define __NR_io_destroy		246
+#define __NR_io_getevents	247
+#define __NR_io_submit		248
+#define __NR_io_cancel		249
+#define __NR_fadvise64		250
+
+#define __NR_exit_group		252
+#define __NR_lookup_dcookie	253
+#define __NR_epoll_create	254
+#define __NR_epoll_ctl		255
+#define __NR_epoll_wait		256
+#define __NR_remap_file_pages	257
+#define __NR_set_tid_address	258
+#define __NR_timer_create	259
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		268
+#define __NR_fstatfs64		269
+#define __NR_tgkill		270
+#define __NR_utimes		271
+#define __NR_fadvise64_64	272
+#define __NR_vserver		273
+#define __NR_mbind              274
+#define __NR_get_mempolicy      275
+#define __NR_set_mempolicy      276
+#define __NR_mq_open            277
+#define __NR_mq_unlink          (__NR_mq_open+1)
+#define __NR_mq_timedsend       (__NR_mq_open+2)
+#define __NR_mq_timedreceive    (__NR_mq_open+3)
+#define __NR_mq_notify          (__NR_mq_open+4)
+#define __NR_mq_getsetattr      (__NR_mq_open+5)
+#define __NR_kexec_load		283
+#define __NR_waitid		284
+#define __NR_add_key		285
+#define __NR_request_key	286
+#define __NR_keyctl		287
+#define __NR_ioprio_set		288
+#define __NR_ioprio_get		289
+#define __NR_inotify_init	290
+#define __NR_inotify_add_watch	291
+#define __NR_inotify_rm_watch	292
+/* 293 is unused */
+#define __NR_migrate_pages	294
+#define __NR_openat		295
+#define __NR_mkdirat		296
+#define __NR_mknodat		297
+#define __NR_fchownat		298
+#define __NR_futimesat		299
+#define __NR_fstatat64		300
+#define __NR_unlinkat		301
+#define __NR_renameat		302
+#define __NR_linkat		303
+#define __NR_symlinkat		304
+#define __NR_readlinkat		305
+#define __NR_fchmodat		306
+#define __NR_faccessat		307
+#define __NR_pselect6		308
+#define __NR_ppoll		309
+#define __NR_unshare		310
+#define __NR_set_robust_list	311
+#define __NR_get_robust_list	312
+#define __NR_splice		313
+#define __NR_sync_file_range	314
+#define __NR_tee		315
+#define __NR_vmsplice		316
+#define __NR_move_pages		317
+#define __NR_getcpu		318
+#define __NR_epoll_pwait	319
+#define __NR_utimensat		320
+#define __NR_signalfd		321
+#define __NR_timerfd_create	322
+#define __NR_eventfd		323
+#define __NR_fallocate		324
+#define __NR_timerfd_settime	325
+#define __NR_timerfd_gettime	326
+#define __NR_signalfd4		327
+#define __NR_eventfd2		328
+#define __NR_epoll_create1	329
+#define __NR_dup3		330
+#define __NR_pipe2		331
+#define __NR_inotify_init1	332
+
+#define NR_syscalls 333
+
+#ifdef __KERNEL__
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_UNISTD_H */
diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h
new file mode 100644
index 000000000000..7c54e91753c1
--- /dev/null
+++ b/arch/sh/include/asm/unistd_64.h
@@ -0,0 +1,423 @@
+#ifndef __ASM_SH_UNISTD_64_H
+#define __ASM_SH_UNISTD_64_H
+
+/*
+ * include/asm-sh/unistd_64.h
+ *
+ * This file contains the system call numbers.
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003 - 2007 Paul Mundt
+ * Copyright (C) 2004  Sean McGoogan
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_lchown		 16
+#define __NR_break		 17
+#define __NR_oldstat		 18
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_oldfstat		 28
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_mpx		 56
+#define __NR_setpgid		 57
+#define __NR_ulimit		 58
+#define __NR_oldolduname	 59
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_getrlimit		 76	/* Back compatible 2Gig limited rlimit */
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_oldlstat		 84
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_ioperm		101
+#define __NR_socketcall		102	/* old implementation of socket systemcall */
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_olduname		109
+#define __NR_iopl		110
+#define __NR_vhangup		111
+#define __NR_idle		112
+#define __NR_vm86old		113
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_modify_ldt		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR__newselect		142
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_vm86		166
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread64		180
+#define __NR_pwrite64		181
+#define __NR_chown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_streams1		188	/* some people actually want it */
+#define __NR_streams2		189	/* some people actually want it */
+#define __NR_vfork		190
+#define __NR_ugetrlimit		191	/* SuS compliant getrlimit */
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_lchown32		198
+#define __NR_getuid32		199
+#define __NR_getgid32		200
+#define __NR_geteuid32		201
+#define __NR_getegid32		202
+#define __NR_setreuid32		203
+#define __NR_setregid32		204
+#define __NR_getgroups32	205
+#define __NR_setgroups32	206
+#define __NR_fchown32		207
+#define __NR_setresuid32	208
+#define __NR_getresuid32	209
+#define __NR_setresgid32	210
+#define __NR_getresgid32	211
+#define __NR_chown32		212
+#define __NR_setuid32		213
+#define __NR_setgid32		214
+#define __NR_setfsuid32		215
+#define __NR_setfsgid32		216
+#define __NR_pivot_root		217
+#define __NR_mincore		218
+#define __NR_madvise		219
+
+/* Non-multiplexed socket family */
+#define __NR_socket		220
+#define __NR_bind		221
+#define __NR_connect		222
+#define __NR_listen		223
+#define __NR_accept		224
+#define __NR_getsockname	225
+#define __NR_getpeername	226
+#define __NR_socketpair		227
+#define __NR_send		228
+#define __NR_sendto		229
+#define __NR_recv		230
+#define __NR_recvfrom		231
+#define __NR_shutdown		232
+#define __NR_setsockopt		233
+#define __NR_getsockopt		234
+#define __NR_sendmsg		235
+#define __NR_recvmsg		236
+
+/* Non-multiplexed IPC family */
+#define __NR_semop		237
+#define __NR_semget		238
+#define __NR_semctl		239
+#define __NR_msgsnd		240
+#define __NR_msgrcv		241
+#define __NR_msgget		242
+#define __NR_msgctl		243
+#if 0
+#define __NR_shmatcall		244
+#endif
+#define __NR_shmdt		245
+#define __NR_shmget		246
+#define __NR_shmctl		247
+
+#define __NR_getdents64		248
+#define __NR_fcntl64		249
+/* 223 is unused */
+#define __NR_gettid		252
+#define __NR_readahead		253
+#define __NR_setxattr		254
+#define __NR_lsetxattr		255
+#define __NR_fsetxattr		256
+#define __NR_getxattr		257
+#define __NR_lgetxattr		258
+#define __NR_fgetxattr		269
+#define __NR_listxattr		260
+#define __NR_llistxattr		261
+#define __NR_flistxattr		262
+#define __NR_removexattr	263
+#define __NR_lremovexattr	264
+#define __NR_fremovexattr	265
+#define __NR_tkill		266
+#define __NR_sendfile64		267
+#define __NR_futex		268
+#define __NR_sched_setaffinity	269
+#define __NR_sched_getaffinity	270
+#define __NR_set_thread_area	271
+#define __NR_get_thread_area	272
+#define __NR_io_setup		273
+#define __NR_io_destroy		274
+#define __NR_io_getevents	275
+#define __NR_io_submit		276
+#define __NR_io_cancel		277
+#define __NR_fadvise64		278
+#define __NR_exit_group		280
+
+#define __NR_lookup_dcookie	281
+#define __NR_epoll_create	282
+#define __NR_epoll_ctl		283
+#define __NR_epoll_wait		284
+#define __NR_remap_file_pages	285
+#define __NR_set_tid_address	286
+#define __NR_timer_create	287
+#define __NR_timer_settime	(__NR_timer_create+1)
+#define __NR_timer_gettime	(__NR_timer_create+2)
+#define __NR_timer_getoverrun	(__NR_timer_create+3)
+#define __NR_timer_delete	(__NR_timer_create+4)
+#define __NR_clock_settime	(__NR_timer_create+5)
+#define __NR_clock_gettime	(__NR_timer_create+6)
+#define __NR_clock_getres	(__NR_timer_create+7)
+#define __NR_clock_nanosleep	(__NR_timer_create+8)
+#define __NR_statfs64		296
+#define __NR_fstatfs64		297
+#define __NR_tgkill		298
+#define __NR_utimes		299
+#define __NR_fadvise64_64	300
+#define __NR_vserver		301
+#define __NR_mbind              302
+#define __NR_get_mempolicy      303
+#define __NR_set_mempolicy      304
+#define __NR_mq_open            305
+#define __NR_mq_unlink          (__NR_mq_open+1)
+#define __NR_mq_timedsend       (__NR_mq_open+2)
+#define __NR_mq_timedreceive    (__NR_mq_open+3)
+#define __NR_mq_notify          (__NR_mq_open+4)
+#define __NR_mq_getsetattr      (__NR_mq_open+5)
+#define __NR_kexec_load		311
+#define __NR_waitid		312
+#define __NR_add_key		313
+#define __NR_request_key	314
+#define __NR_keyctl		315
+#define __NR_ioprio_set		316
+#define __NR_ioprio_get		317
+#define __NR_inotify_init	318
+#define __NR_inotify_add_watch	319
+#define __NR_inotify_rm_watch	320
+/* 321 is unused */
+#define __NR_migrate_pages	322
+#define __NR_openat		323
+#define __NR_mkdirat		324
+#define __NR_mknodat		325
+#define __NR_fchownat		326
+#define __NR_futimesat		327
+#define __NR_fstatat64		328
+#define __NR_unlinkat		329
+#define __NR_renameat		330
+#define __NR_linkat		331
+#define __NR_symlinkat		332
+#define __NR_readlinkat		333
+#define __NR_fchmodat		334
+#define __NR_faccessat		335
+#define __NR_pselect6		336
+#define __NR_ppoll		337
+#define __NR_unshare		338
+#define __NR_set_robust_list	339
+#define __NR_get_robust_list	340
+#define __NR_splice		341
+#define __NR_sync_file_range	342
+#define __NR_tee		343
+#define __NR_vmsplice		344
+#define __NR_move_pages		345
+#define __NR_getcpu		346
+#define __NR_epoll_pwait	347
+#define __NR_utimensat		348
+#define __NR_signalfd		349
+#define __NR_timerfd_create	350
+#define __NR_eventfd		351
+#define __NR_fallocate		352
+#define __NR_timerfd_settime	353
+#define __NR_timerfd_gettime	354
+#define __NR_signalfd4		355
+#define __NR_eventfd2		356
+#define __NR_epoll_create1	357
+#define __NR_dup3		358
+#define __NR_pipe2		359
+#define __NR_inotify_init1	360
+
+#ifdef __KERNEL__
+
+#define NR_syscalls 361
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#ifndef cond_syscall
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+#endif
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_UNISTD_64_H */
diff --git a/arch/sh/include/asm/user.h b/arch/sh/include/asm/user.h
new file mode 100644
index 000000000000..8fd3cf6c58d4
--- /dev/null
+++ b/arch/sh/include/asm/user.h
@@ -0,0 +1,67 @@
+#ifndef __ASM_SH_USER_H
+#define __ASM_SH_USER_H
+
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd).  The file contents are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+
+#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
+struct user_fpu_struct {
+	unsigned long fp_regs[32];
+	unsigned int fpscr;
+};
+#else
+struct user_fpu_struct {
+	unsigned long fp_regs[16];
+	unsigned long xfp_regs[16];
+	unsigned long fpscr;
+	unsigned long fpul;
+};
+#endif
+
+struct user {
+	struct pt_regs	regs;			/* entire machine state */
+	struct user_fpu_struct fpu;	/* Math Co-processor registers  */
+	int u_fpvalid;		/* True if math co-processor being used */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	unsigned long	u_ar0;			/* help gdb find registers */
+	struct user_fpu_struct* u_fpstate;	/* Math Co-processor pointer */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* __ASM_SH_USER_H */
diff --git a/arch/sh/include/asm/vga.h b/arch/sh/include/asm/vga.h
new file mode 100644
index 000000000000..06a5de8ace1a
--- /dev/null
+++ b/arch/sh/include/asm/vga.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_VGA_H
+#define __ASM_SH_VGA_H
+
+/* Stupid drivers. */
+
+#endif /* __ASM_SH_VGA_H */
diff --git a/arch/sh/include/asm/watchdog.h b/arch/sh/include/asm/watchdog.h
new file mode 100644
index 000000000000..f024fed00a72
--- /dev/null
+++ b/arch/sh/include/asm/watchdog.h
@@ -0,0 +1,107 @@
+/*
+ * include/asm-sh/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#ifndef __ASM_SH_WATCHDOG_H
+#define __ASM_SH_WATCHDOG_H
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <cpu/watchdog.h>
+#include <asm/io.h>
+
+/* 
+ * See cpu-sh2/watchdog.h for explanation of this stupidity..
+ */
+#ifndef WTCNT_R
+#  define WTCNT_R	WTCNT
+#endif
+
+#ifndef WTCSR_R
+#  define WTCSR_R	WTCSR
+#endif
+
+#define WTCNT_HIGH	0x5a
+#define WTCSR_HIGH	0xa5
+
+#define WTCSR_CKS2	0x04
+#define WTCSR_CKS1	0x02
+#define WTCSR_CKS0	0x01
+
+/*
+ * CKS0-2 supports a number of clock division ratios. At the time the watchdog
+ * is enabled, it defaults to a 41 usec overflow period .. we overload this to
+ * something a little more reasonable, and really can't deal with anything
+ * lower than WTCSR_CKS_1024, else we drop back into the usec range.
+ *
+ * Clock Division Ratio         Overflow Period
+ * --------------------------------------------
+ *     1/32 (initial value)       41 usecs
+ *     1/64                       82 usecs
+ *     1/128                     164 usecs
+ *     1/256                     328 usecs
+ *     1/512                     656 usecs
+ *     1/1024                   1.31 msecs
+ *     1/2048                   2.62 msecs
+ *     1/4096                   5.25 msecs
+ */
+#define WTCSR_CKS_32	0x00
+#define WTCSR_CKS_64	0x01
+#define WTCSR_CKS_128	0x02
+#define WTCSR_CKS_256	0x03
+#define WTCSR_CKS_512	0x04
+#define WTCSR_CKS_1024	0x05
+#define WTCSR_CKS_2048	0x06
+#define WTCSR_CKS_4096	0x07
+
+/**
+ * 	sh_wdt_read_cnt - Read from Counter
+ * 	Reads back the WTCNT value.
+ */
+static inline __u8 sh_wdt_read_cnt(void)
+{
+	return ctrl_inb(WTCNT_R);
+}
+
+/**
+ *	sh_wdt_write_cnt - Write to Counter
+ *	@val: Value to write
+ *
+ *	Writes the given value @val to the lower byte of the timer counter.
+ *	The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_cnt(__u8 val)
+{
+	ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, WTCNT);
+}
+
+/**
+ * 	sh_wdt_read_csr - Read from Control/Status Register
+ *
+ *	Reads back the WTCSR value.
+ */
+static inline __u8 sh_wdt_read_csr(void)
+{
+	return ctrl_inb(WTCSR_R);
+}
+
+/**
+ * 	sh_wdt_write_csr - Write to Control/Status Register
+ * 	@val: Value to write
+ *
+ * 	Writes the given value @val to the lower byte of the control/status
+ * 	register. The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_csr(__u8 val)
+{
+	ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR);
+}
+
+#endif /* __KERNEL__ */
+#endif /* __ASM_SH_WATCHDOG_H */
diff --git a/arch/sh/include/asm/xor.h b/arch/sh/include/asm/xor.h
new file mode 100644
index 000000000000..c82eb12a5b18
--- /dev/null
+++ b/arch/sh/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/arch/sh/include/cpu-common/cpu/addrspace.h b/arch/sh/include/cpu-common/cpu/addrspace.h
new file mode 100644
index 000000000000..2b9ab93efa4e
--- /dev/null
+++ b/arch/sh/include/cpu-common/cpu/addrspace.h
@@ -0,0 +1,19 @@
+/*
+ * Definitions for the address spaces of the SH-2 CPUs.
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_ADDRSPACE_H
+#define __ASM_CPU_SH2_ADDRSPACE_H
+
+#define P0SEG		0x00000000
+#define P1SEG		0x80000000
+#define P2SEG		0xa0000000
+#define P3SEG		0xc0000000
+#define P4SEG		0xe0000000
+
+#endif /* __ASM_CPU_SH2_ADDRSPACE_H */
diff --git a/arch/sh/include/cpu-common/cpu/cacheflush.h b/arch/sh/include/cpu-common/cpu/cacheflush.h
new file mode 100644
index 000000000000..c3db00b73605
--- /dev/null
+++ b/arch/sh/include/cpu-common/cpu/cacheflush.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-sh/cpu-sh2/cacheflush.h
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_CACHEFLUSH_H
+#define __ASM_CPU_SH2_CACHEFLUSH_H
+
+/*
+ * Cache flushing:
+ *
+ *  - flush_cache_all() flushes entire cache
+ *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ *  - flush_cache_dup mm(mm) handles cache flushing when forking
+ *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ *  - flush_cache_range(vma, start, end) flushes a range of pages
+ *
+ *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
+ *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
+ *
+ *  Caches are indexed (effectively) by physical address on SH-2, so
+ *  we don't need them.
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_sigtramp(vaddr)		do { } while (0)
+
+#define p3_cache_init()				do { } while (0)
+
+#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-common/cpu/mmu_context.h b/arch/sh/include/cpu-common/cpu/mmu_context.h
new file mode 100644
index 000000000000..beeb299e01ec
--- /dev/null
+++ b/arch/sh/include/cpu-common/cpu/mmu_context.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-sh/cpu-sh2/mmu_context.h
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_MMU_CONTEXT_H
+#define __ASM_CPU_SH2_MMU_CONTEXT_H
+
+/* No MMU */
+
+#endif /* __ASM_CPU_SH2_MMU_CONTEXT_H */
+
diff --git a/arch/sh/include/cpu-common/cpu/rtc.h b/arch/sh/include/cpu-common/cpu/rtc.h
new file mode 100644
index 000000000000..39e2d6e94782
--- /dev/null
+++ b/arch/sh/include/cpu-common/cpu/rtc.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_SH_CPU_SH2_RTC_H
+#define __ASM_SH_CPU_SH2_RTC_H
+
+#define rtc_reg_size		sizeof(u16)
+#define RTC_BIT_INVERTED	0
+#define RTC_DEF_CAPABILITIES	0UL
+
+#endif /* __ASM_SH_CPU_SH2_RTC_H */
diff --git a/arch/sh/include/cpu-common/cpu/sigcontext.h b/arch/sh/include/cpu-common/cpu/sigcontext.h
new file mode 100644
index 000000000000..fe5c15dd6e87
--- /dev/null
+++ b/arch/sh/include/cpu-common/cpu/sigcontext.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_CPU_SH2_SIGCONTEXT_H
+#define __ASM_CPU_SH2_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long	oldmask;
+
+	/* CPU registers */
+	unsigned long sc_regs[16];
+	unsigned long sc_pc;
+	unsigned long sc_pr;
+	unsigned long sc_sr;
+	unsigned long sc_gbr;
+	unsigned long sc_mach;
+	unsigned long sc_macl;
+};
+
+#endif /* __ASM_CPU_SH2_SIGCONTEXT_H */
diff --git a/arch/sh/include/cpu-common/cpu/timer.h b/arch/sh/include/cpu-common/cpu/timer.h
new file mode 100644
index 000000000000..a39c241e8195
--- /dev/null
+++ b/arch/sh/include/cpu-common/cpu/timer.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_CPU_SH2_TIMER_H
+#define __ASM_CPU_SH2_TIMER_H
+
+/* Nothing needed yet */
+
+#endif /* __ASM_CPU_SH2_TIMER_H */
diff --git a/arch/sh/include/cpu-sh2/cpu/cache.h b/arch/sh/include/cpu-sh2/cpu/cache.h
new file mode 100644
index 000000000000..673515bc4135
--- /dev/null
+++ b/arch/sh/include/cpu-sh2/cpu/cache.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/cpu-sh2/cache.h
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_CACHE_H
+#define __ASM_CPU_SH2_CACHE_H
+
+#define L1_CACHE_SHIFT	4
+
+#define SH_CACHE_VALID		1
+#define SH_CACHE_UPDATED	2
+#define SH_CACHE_COMBINED	4
+#define SH_CACHE_ASSOC		8
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7619)
+#define CCR		0xffffffec
+
+#define CCR_CACHE_CE	0x01	/* Cache enable */
+#define CCR_CACHE_WT	0x02    /* CCR[bit1=1,bit2=1] */
+				/* 0x00000000-0x7fffffff: Write-through  */
+				/* 0x80000000-0x9fffffff: Write-back     */
+                                /* 0xc0000000-0xdfffffff: Write-through  */
+#define CCR_CACHE_CB	0x04    /* CCR[bit1=0,bit2=0] */
+				/* 0x00000000-0x7fffffff: Write-back     */
+				/* 0x80000000-0x9fffffff: Write-through  */
+                                /* 0xc0000000-0xdfffffff: Write-back     */
+#define CCR_CACHE_CF	0x08	/* Cache invalidate */
+
+#define CACHE_OC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_OC_DATA_ARRAY	0xf1000000
+
+#define CCR_CACHE_ENABLE	CCR_CACHE_CE
+#define CCR_CACHE_INVALIDATE	CCR_CACHE_CF
+#define CACHE_PHYSADDR_MASK	0x1ffffc00
+
+#endif
+
+#endif /* __ASM_CPU_SH2_CACHE_H */
diff --git a/arch/sh/include/cpu-sh2/cpu/dma.h b/arch/sh/include/cpu-sh2/cpu/dma.h
new file mode 100644
index 000000000000..d66b43cdc637
--- /dev/null
+++ b/arch/sh/include/cpu-sh2/cpu/dma.h
@@ -0,0 +1,23 @@
+/*
+ * Definitions for the SH-2 DMAC.
+ *
+ * Copyright (C) 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_DMA_H
+#define __ASM_CPU_SH2_DMA_H
+
+#define SH_MAX_DMA_CHANNELS	2
+
+#define SAR	((unsigned long[]){ 0xffffff80, 0xffffff90 })
+#define DAR	((unsigned long[]){ 0xffffff84, 0xffffff94 })
+#define DMATCR	((unsigned long[]){ 0xffffff88, 0xffffff98 })
+#define CHCR	((unsigned long[]){ 0xfffffffc, 0xffffff9c })
+
+#define DMAOR	0xffffffb0
+
+#endif /* __ASM_CPU_SH2_DMA_H */
+
diff --git a/arch/sh/include/cpu-sh2/cpu/freq.h b/arch/sh/include/cpu-sh2/cpu/freq.h
new file mode 100644
index 000000000000..31de475da70b
--- /dev/null
+++ b/arch/sh/include/cpu-sh2/cpu/freq.h
@@ -0,0 +1,18 @@
+/*
+ * include/asm-sh/cpu-sh2/freq.h
+ *
+ * Copyright (C) 2006  Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_FREQ_H
+#define __ASM_CPU_SH2_FREQ_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7619)
+#define FREQCR	0xf815ff80
+#endif
+
+#endif /* __ASM_CPU_SH2_FREQ_H */
+
diff --git a/arch/sh/include/cpu-sh2/cpu/ubc.h b/arch/sh/include/cpu-sh2/cpu/ubc.h
new file mode 100644
index 000000000000..ba0e87f19c7a
--- /dev/null
+++ b/arch/sh/include/cpu-sh2/cpu/ubc.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-sh/cpu-sh2/ubc.h
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_UBC_H
+#define __ASM_CPU_SH2_UBC_H
+
+#define UBC_BARA                0xffffff40
+#define UBC_BAMRA               0xffffff44
+#define UBC_BBRA                0xffffff48
+#define UBC_BARB                0xffffff60
+#define UBC_BAMRB               0xffffff64
+#define UBC_BBRB                0xffffff68
+#define UBC_BDRB                0xffffff70
+#define UBC_BDMRB               0xffffff74
+#define UBC_BRCR                0xffffff78
+
+/*
+ * We don't have any ASID changes to make in the UBC on the SH-2.
+ *
+ * Make these purposely invalid to track misuse.
+ */
+#define UBC_BASRA		0x00000000
+#define UBC_BASRB		0x00000000
+
+#endif /* __ASM_CPU_SH2_UBC_H */
+
diff --git a/arch/sh/include/cpu-sh2/cpu/watchdog.h b/arch/sh/include/cpu-sh2/cpu/watchdog.h
new file mode 100644
index 000000000000..393161c9c6d0
--- /dev/null
+++ b/arch/sh/include/cpu-sh2/cpu/watchdog.h
@@ -0,0 +1,69 @@
+/*
+ * include/asm-sh/cpu-sh2/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2_WATCHDOG_H
+#define __ASM_CPU_SH2_WATCHDOG_H
+
+/*
+ * More SH-2 brilliance .. its not good enough that we can't read
+ * and write the same sizes to WTCNT, now we have to read and write
+ * with different sizes at different addresses for WTCNT _and_ RSTCSR.
+ *
+ * At least on the bright side no one has managed to screw over WTCSR
+ * in this fashion .. yet.
+ */
+/* Register definitions */
+#define WTCNT		0xfffffe80
+#define WTCSR		0xfffffe80
+#define RSTCSR		0xfffffe82
+
+#define WTCNT_R		(WTCNT + 1)
+#define RSTCSR_R	(RSTCSR + 1)
+
+/* Bit definitions */
+#define WTCSR_IOVF	0x80
+#define WTCSR_WT	0x40
+#define WTCSR_TME	0x20
+#define WTCSR_RSTS	0x00
+
+#define RSTCSR_RSTS	0x20
+
+/**
+ * 	sh_wdt_read_rstcsr - Read from Reset Control/Status Register
+ *
+ *	Reads back the RSTCSR value.
+ */
+static inline __u8 sh_wdt_read_rstcsr(void)
+{
+	/*
+	 * Same read/write brain-damage as for WTCNT here..
+	 */
+	return ctrl_inb(RSTCSR_R);
+}
+
+/**
+ * 	sh_wdt_write_csr - Write to Reset Control/Status Register
+ *
+ * 	@val: Value to write
+ *
+ * 	Writes the given value @val to the lower byte of the control/status
+ * 	register. The upper byte is set manually on each write.
+ */
+static inline void sh_wdt_write_rstcsr(__u8 val)
+{
+	/*
+	 * Note: Due to the brain-damaged nature of this register,
+	 * we can't presently touch the WOVF bit, since the upper byte
+	 * has to be swapped for this. So just leave it alone..
+	 */
+	ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, RSTCSR);
+}
+
+#endif /* __ASM_CPU_SH2_WATCHDOG_H */
+
diff --git a/arch/sh/include/cpu-sh2a/cpu/addrspace.h b/arch/sh/include/cpu-sh2a/cpu/addrspace.h
new file mode 100644
index 000000000000..31eb4b58aa6d
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/addrspace.h
@@ -0,0 +1,10 @@
+#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H
+#define __ASM_SH_CPU_SH2A_ADDRSPACE_H
+
+#define P0SEG		0x00000000
+#define P1SEG		0x00000000
+#define P2SEG		0x20000000
+#define P3SEG		0x40000000
+#define P4SEG		0x60000000
+
+#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/cache.h b/arch/sh/include/cpu-sh2a/cpu/cache.h
new file mode 100644
index 000000000000..defb0baa5a06
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/cache.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/cpu-sh2a/cache.h
+ *
+ * Copyright (C) 2004 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2A_CACHE_H
+#define __ASM_CPU_SH2A_CACHE_H
+
+#define L1_CACHE_SHIFT	4
+
+#define SH_CACHE_VALID		1
+#define SH_CACHE_UPDATED	2
+#define SH_CACHE_COMBINED	4
+#define SH_CACHE_ASSOC		8
+
+#define CCR		0xfffc1000 /* CCR1 */
+#define CCR2		0xfffc1004
+
+/*
+ * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not
+ * listed here are reserved.
+ */
+#define CCR_CACHE_CB	0x0000	/* Hack */
+#define CCR_CACHE_OCE	0x0001
+#define CCR_CACHE_WT	0x0002
+#define CCR_CACHE_OCI	0x0008	/* OCF */
+#define CCR_CACHE_ICE	0x0100
+#define CCR_CACHE_ICI	0x0800	/* ICF */
+
+#define CACHE_IC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_OC_ADDRESS_ARRAY	0xf0800000
+
+#define CCR_CACHE_ENABLE	(CCR_CACHE_OCE | CCR_CACHE_ICE)
+#define CCR_CACHE_INVALIDATE	(CCR_CACHE_OCI | CCR_CACHE_ICI)
+#define CCR_ICACHE_INVALIDATE	CCR_CACHE_ICI
+#define CCR_OCACHE_INVALIDATE	CCR_CACHE_OCI
+#define CACHE_PHYSADDR_MASK	0x1ffffc00
+
+#endif /* __ASM_CPU_SH2A_CACHE_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
new file mode 100644
index 000000000000..3d3b9205d2ac
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h
@@ -0,0 +1,34 @@
+#ifndef __ASM_CPU_SH2A_CACHEFLUSH_H
+#define __ASM_CPU_SH2A_CACHEFLUSH_H
+
+/* 
+ * Cache flushing:
+ *
+ *  - flush_cache_all() flushes entire cache
+ *  - flush_cache_mm(mm) flushes the specified mm context's cache lines
+ *  - flush_cache_dup mm(mm) handles cache flushing when forking
+ *  - flush_cache_page(mm, vmaddr, pfn) flushes a single page
+ *  - flush_cache_range(vma, start, end) flushes a range of pages
+ *
+ *  - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache
+ *  - flush_icache_range(start, end) flushes(invalidates) a range for icache
+ *  - flush_icache_page(vma, pg) flushes(invalidates) a page for icache
+ *
+ *  Caches are indexed (effectively) by physical address on SH-2, so
+ *  we don't need them.
+ */
+#define flush_cache_all()			do { } while (0)
+#define flush_cache_mm(mm)			do { } while (0)
+#define flush_cache_dup_mm(mm)			do { } while (0)
+#define flush_cache_range(vma, start, end)	do { } while (0)
+#define flush_cache_page(vma, vmaddr, pfn)	do { } while (0)
+#define flush_dcache_page(page)			do { } while (0)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+void flush_icache_range(unsigned long start, unsigned long end);
+#define flush_icache_page(vma,pg)		do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+#define flush_cache_sigtramp(vaddr)		do { } while (0)
+
+#define p3_cache_init()				do { } while (0)
+#endif /* __ASM_CPU_SH2A_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/dma.h b/arch/sh/include/cpu-sh2a/cpu/dma.h
new file mode 100644
index 000000000000..27a13ef4fdfc
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/dma.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/dma.h>
diff --git a/arch/sh/include/cpu-sh2a/cpu/freq.h b/arch/sh/include/cpu-sh2a/cpu/freq.h
new file mode 100644
index 000000000000..830fd43b6cdc
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/freq.h
@@ -0,0 +1,16 @@
+/*
+ * include/asm-sh/cpu-sh2a/freq.h
+ *
+ * Copyright (C) 2006  Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH2A_FREQ_H
+#define __ASM_CPU_SH2A_FREQ_H
+
+#define FREQCR	0xfffe0010
+
+#endif /* __ASM_CPU_SH2A_FREQ_H */
+
diff --git a/arch/sh/include/cpu-sh2a/cpu/rtc.h b/arch/sh/include/cpu-sh2a/cpu/rtc.h
new file mode 100644
index 000000000000..afb511e2bed7
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/rtc.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_SH_CPU_SH2A_RTC_H
+#define __ASM_SH_CPU_SH2A_RTC_H
+
+#define rtc_reg_size		sizeof(u16)
+#define RTC_BIT_INVERTED	0
+#define RTC_DEF_CAPABILITIES	RTC_CAP_4_DIGIT_YEAR
+
+#endif /* __ASM_SH_CPU_SH2A_RTC_H */
diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h
new file mode 100644
index 000000000000..8ce2fc1cf625
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/ubc.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/ubc.h>
diff --git a/arch/sh/include/cpu-sh2a/cpu/watchdog.h b/arch/sh/include/cpu-sh2a/cpu/watchdog.h
new file mode 100644
index 000000000000..e7e8259e468c
--- /dev/null
+++ b/arch/sh/include/cpu-sh2a/cpu/watchdog.h
@@ -0,0 +1 @@
+#include <cpu-sh2/cpu/watchdog.h>
diff --git a/arch/sh/include/cpu-sh3/cpu/adc.h b/arch/sh/include/cpu-sh3/cpu/adc.h
new file mode 100644
index 000000000000..b289e3ca19a6
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/adc.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_CPU_SH3_ADC_H
+#define __ASM_CPU_SH3_ADC_H
+
+/*
+ * Copyright (C) 2004  Andriy Skulysh
+ */
+
+
+#define ADDRAH	0xa4000080
+#define ADDRAL	0xa4000082
+#define ADDRBH	0xa4000084
+#define ADDRBL	0xa4000086
+#define ADDRCH	0xa4000088
+#define ADDRCL	0xa400008a
+#define ADDRDH	0xa400008c
+#define ADDRDL	0xa400008e
+#define ADCSR	0xa4000090
+
+#define ADCSR_ADF	0x80
+#define ADCSR_ADIE	0x40
+#define ADCSR_ADST	0x20
+#define ADCSR_MULTI	0x10
+#define ADCSR_CKS	0x08
+#define ADCSR_CH_MASK	0x07
+
+#define ADCR	0xa4000092
+
+#endif /* __ASM_CPU_SH3_ADC_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/cache.h b/arch/sh/include/cpu-sh3/cpu/cache.h
new file mode 100644
index 000000000000..bee2d81c56bf
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/cache.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/cpu-sh3/cache.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_CACHE_H
+#define __ASM_CPU_SH3_CACHE_H
+
+#define L1_CACHE_SHIFT	4
+
+#define SH_CACHE_VALID		1
+#define SH_CACHE_UPDATED	2
+#define SH_CACHE_COMBINED	4
+#define SH_CACHE_ASSOC		8
+
+#define CCR		0xffffffec	/* Address of Cache Control Register */
+
+#define CCR_CACHE_CE	0x01	/* Cache Enable */
+#define CCR_CACHE_WT	0x02	/* Write-Through (for P0,U0,P3) (else writeback) */
+#define CCR_CACHE_CB	0x04	/* Write-Back (for P1) (else writethrough) */
+#define CCR_CACHE_CF	0x08	/* Cache Flush */
+#define CCR_CACHE_ORA	0x20	/* RAM mode */
+
+#define CACHE_OC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_PHYSADDR_MASK	0x1ffffc00
+
+#define CCR_CACHE_ENABLE	CCR_CACHE_CE
+#define CCR_CACHE_INVALIDATE	CCR_CACHE_CF
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
+#define CCR3_REG	0xa40000b4
+#define CCR_CACHE_16KB  0x00010000
+#define CCR_CACHE_32KB	0x00020000
+#endif
+
+#endif /* __ASM_CPU_SH3_CACHE_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
new file mode 100644
index 000000000000..abc909880807
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h
@@ -0,0 +1,36 @@
+/*
+ * include/asm-sh/cpu-sh3/cacheflush.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_CACHEFLUSH_H
+#define __ASM_CPU_SH3_CACHEFLUSH_H
+
+#if defined(CONFIG_SH7705_CACHE_32KB)
+/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the
+ * SH4. Unlike the SH4 this is a unified cache so we need to do some work
+ * in mmap when 'exec'ing a new binary
+ */
+ /* 32KB cache, 4kb PAGE sizes need to check bit 12 */
+#define CACHE_ALIAS 0x00001000
+
+#define PG_mapped	PG_arch_1
+
+void flush_cache_all(void);
+void flush_cache_mm(struct mm_struct *mm);
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+                              unsigned long end);
+void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
+void flush_dcache_page(struct page *pg);
+void flush_icache_range(unsigned long start, unsigned long end);
+void flush_icache_page(struct vm_area_struct *vma, struct page *page);
+#else
+#include <cpu-common/cpu/cacheflush.h>
+#endif
+
+#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/dac.h b/arch/sh/include/cpu-sh3/cpu/dac.h
new file mode 100644
index 000000000000..05fda8316ebc
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/dac.h
@@ -0,0 +1,41 @@
+#ifndef __ASM_CPU_SH3_DAC_H
+#define __ASM_CPU_SH3_DAC_H
+
+/*
+ * Copyright (C) 2003  Andriy Skulysh
+ */
+
+
+#define DADR0	0xa40000a0
+#define DADR1	0xa40000a2
+#define DACR	0xa40000a4
+#define DACR_DAOE1	0x80
+#define DACR_DAOE0	0x40
+#define DACR_DAE	0x20
+
+
+static __inline__ void sh_dac_enable(int channel)
+{
+	unsigned char v;
+	v = ctrl_inb(DACR);
+	if(channel) v |= DACR_DAOE1;
+	else v |= DACR_DAOE0;
+	ctrl_outb(v,DACR);
+}
+
+static __inline__ void sh_dac_disable(int channel)
+{
+	unsigned char v;
+	v = ctrl_inb(DACR);
+	if(channel) v &= ~DACR_DAOE1;
+	else v &= ~DACR_DAOE0;
+	ctrl_outb(v,DACR);
+}
+
+static __inline__ void sh_dac_output(u8 value, int channel)
+{
+	if(channel) ctrl_outb(value,DADR1);
+	else ctrl_outb(value,DADR0);
+}
+
+#endif /* __ASM_CPU_SH3_DAC_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h
new file mode 100644
index 000000000000..6813c3220a1d
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/dma.h
@@ -0,0 +1,51 @@
+#ifndef __ASM_CPU_SH3_DMA_H
+#define __ASM_CPU_SH3_DMA_H
+
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
+#define SH_DMAC_BASE	0xa4010020
+#else
+#define SH_DMAC_BASE	0xa4000020
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709)
+#define DMTE0_IRQ	48
+#define DMTE1_IRQ	49
+#define DMTE2_IRQ	50
+#define DMTE3_IRQ	51
+#define DMTE4_IRQ	76
+#define DMTE5_IRQ	77
+#endif
+
+/* Definitions for the SuperH DMAC */
+#define TM_BURST	0x00000020
+#define TS_8		0x00000000
+#define TS_16		0x00000008
+#define TS_32		0x00000010
+#define TS_128		0x00000018
+
+#define CHCR_TS_MASK	0x18
+#define CHCR_TS_SHIFT	3
+
+#define DMAOR_INIT	DMAOR_DME
+
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ */
+enum {
+	XMIT_SZ_8BIT,
+	XMIT_SZ_16BIT,
+	XMIT_SZ_32BIT,
+	XMIT_SZ_128BIT,
+};
+
+static unsigned int ts_shift[] __maybe_unused = {
+	[XMIT_SZ_8BIT]		= 0,
+	[XMIT_SZ_16BIT]		= 1,
+	[XMIT_SZ_32BIT]		= 2,
+	[XMIT_SZ_128BIT]	= 4,
+};
+
+#endif /* __ASM_CPU_SH3_DMA_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/freq.h b/arch/sh/include/cpu-sh3/cpu/freq.h
new file mode 100644
index 000000000000..53c62302b2e3
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/freq.h
@@ -0,0 +1,27 @@
+/*
+ * include/asm-sh/cpu-sh3/freq.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_FREQ_H
+#define __ASM_CPU_SH3_FREQ_H
+
+#ifdef CONFIG_CPU_SUBTYPE_SH7712
+#define FRQCR			0xA415FF80
+#else
+#define FRQCR			0xffffff80
+#endif
+
+#define MIN_DIVISOR_NR		0
+#define MAX_DIVISOR_NR		4
+
+#define FRQCR_CKOEN	0x0100
+#define FRQCR_PLLEN	0x0080
+#define FRQCR_PSTBY	0x0040
+
+#endif /* __ASM_CPU_SH3_FREQ_H */
+
diff --git a/arch/sh/include/cpu-sh3/cpu/gpio.h b/arch/sh/include/cpu-sh3/cpu/gpio.h
new file mode 100644
index 000000000000..4e53eb314b8f
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/gpio.h
@@ -0,0 +1,67 @@
+/*
+ *  include/asm-sh/cpu-sh3/gpio.h
+ *
+ *  Copyright (C) 2007  Markus Brunner, Mark Jonas
+ *
+ *  Addresses for the Pin Function Controller
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _CPU_SH3_GPIO_H
+#define _CPU_SH3_GPIO_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
+
+/* Control registers */
+#define PORT_PACR	0xA4050100UL
+#define PORT_PBCR	0xA4050102UL
+#define PORT_PCCR	0xA4050104UL
+#define PORT_PDCR	0xA4050106UL
+#define PORT_PECR	0xA4050108UL
+#define PORT_PFCR	0xA405010AUL
+#define PORT_PGCR	0xA405010CUL
+#define PORT_PHCR	0xA405010EUL
+#define PORT_PJCR	0xA4050110UL
+#define PORT_PKCR	0xA4050112UL
+#define PORT_PLCR	0xA4050114UL
+#define PORT_PMCR	0xA4050116UL
+#define PORT_PPCR	0xA4050118UL
+#define PORT_PRCR	0xA405011AUL
+#define PORT_PSCR	0xA405011CUL
+#define PORT_PTCR	0xA405011EUL
+#define PORT_PUCR	0xA4050120UL
+#define PORT_PVCR	0xA4050122UL
+
+/* Data registers */
+#define PORT_PADR	0xA4050140UL
+/* Address of PORT_PBDR is wrong in the datasheet, see errata 2005-09-21 */
+#define PORT_PBDR	0xA4050142UL
+#define PORT_PCDR	0xA4050144UL
+#define PORT_PDDR	0xA4050146UL
+#define PORT_PEDR	0xA4050148UL
+#define PORT_PFDR	0xA405014AUL
+#define PORT_PGDR	0xA405014CUL
+#define PORT_PHDR	0xA405014EUL
+#define PORT_PJDR	0xA4050150UL
+#define PORT_PKDR	0xA4050152UL
+#define PORT_PLDR	0xA4050154UL
+#define PORT_PMDR	0xA4050156UL
+#define PORT_PPDR	0xA4050158UL
+#define PORT_PRDR	0xA405015AUL
+#define PORT_PSDR	0xA405015CUL
+#define PORT_PTDR	0xA405015EUL
+#define PORT_PUDR	0xA4050160UL
+#define PORT_PVDR	0xA4050162UL
+
+/* Pin Select Registers */
+#define PORT_PSELA	0xA4050124UL
+#define PORT_PSELB	0xA4050126UL
+#define PORT_PSELC	0xA4050128UL
+#define PORT_PSELD	0xA405012AUL
+
+#endif
+
+#endif
diff --git a/arch/sh/include/cpu-sh3/cpu/mmu_context.h b/arch/sh/include/cpu-sh3/cpu/mmu_context.h
new file mode 100644
index 000000000000..ab09da73ce77
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/mmu_context.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-sh/cpu-sh3/mmu_context.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_MMU_CONTEXT_H
+#define __ASM_CPU_SH3_MMU_CONTEXT_H
+
+#define MMU_PTEH	0xFFFFFFF0	/* Page table entry register HIGH */
+#define MMU_PTEL	0xFFFFFFF4	/* Page table entry register LOW */
+#define MMU_TTB		0xFFFFFFF8	/* Translation table base register */
+#define MMU_TEA		0xFFFFFFFC	/* TLB Exception Address */
+
+#define MMUCR		0xFFFFFFE0	/* MMU Control Register */
+
+#define MMU_TLB_ADDRESS_ARRAY	0xF2000000
+#define MMU_PAGE_ASSOC_BIT	0x80
+
+#define MMU_NTLB_ENTRIES	128	/* for 7708 */
+#define MMU_NTLB_WAYS		4
+#define MMU_CONTROL_INIT	0x007	/* SV=0, TF=1, IX=1, AT=1 */
+
+#define TRA	0xffffffd0
+#define EXPEVT	0xffffffd4
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7706) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7707) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7712) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
+#define INTEVT	0xa4000000	/* INTEVTE2(0xa4000000) */
+#else
+#define INTEVT	0xffffffd8
+#endif
+
+#endif /* __ASM_CPU_SH3_MMU_CONTEXT_H */
+
diff --git a/arch/sh/include/cpu-sh3/cpu/timer.h b/arch/sh/include/cpu-sh3/cpu/timer.h
new file mode 100644
index 000000000000..793acf12aa08
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/timer.h
@@ -0,0 +1,67 @@
+/*
+ * include/asm-sh/cpu-sh3/timer.h
+ *
+ * Copyright (C) 2004 Lineo Solutions, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_TIMER_H
+#define __ASM_CPU_SH3_TIMER_H
+
+/*
+ * ---------------------------------------------------------------------------
+ * TMU Common definitions for SH3 processors
+ *	SH7706
+ *	SH7709S
+ *	SH7727
+ *	SH7729R
+ *	SH7710
+ *	SH7720
+ *	SH7710
+ * ---------------------------------------------------------------------------
+ */
+
+#if  !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721)
+#define TMU_TOCR	0xfffffe90	/* Byte access */
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
+#define TMU_012_TSTR	0xa412fe92	/* Byte access */
+
+#define TMU0_TCOR	0xa412fe94	/* Long access */
+#define TMU0_TCNT	0xa412fe98	/* Long access */
+#define TMU0_TCR	0xa412fe9c	/* Word access */
+
+#define TMU1_TCOR	0xa412fea0	/* Long access */
+#define TMU1_TCNT	0xa412fea4	/* Long access */
+#define TMU1_TCR	0xa412fea8	/* Word access */
+
+#define TMU2_TCOR	0xa412feac	/* Long access */
+#define TMU2_TCNT	0xa412feb0	/* Long access */
+#define TMU2_TCR	0xa412feb4	/* Word access */
+
+#else
+#define TMU_012_TSTR	0xfffffe92	/* Byte access */
+
+#define TMU0_TCOR	0xfffffe94	/* Long access */
+#define TMU0_TCNT	0xfffffe98	/* Long access */
+#define TMU0_TCR	0xfffffe9c	/* Word access */
+
+#define TMU1_TCOR	0xfffffea0	/* Long access */
+#define TMU1_TCNT	0xfffffea4	/* Long access */
+#define TMU1_TCR	0xfffffea8	/* Word access */
+
+#define TMU2_TCOR	0xfffffeac	/* Long access */
+#define TMU2_TCNT	0xfffffeb0	/* Long access */
+#define TMU2_TCR	0xfffffeb4	/* Word access */
+#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721)
+#define TMU2_TCPR2	0xfffffeb8	/* Long access */
+#endif
+#endif
+
+#endif /* __ASM_CPU_SH3_TIMER_H */
+
diff --git a/arch/sh/include/cpu-sh3/cpu/ubc.h b/arch/sh/include/cpu-sh3/cpu/ubc.h
new file mode 100644
index 000000000000..4e6381d5ff7a
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/ubc.h
@@ -0,0 +1,42 @@
+/*
+ * include/asm-sh/cpu-sh3/ubc.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_UBC_H
+#define __ASM_CPU_SH3_UBC_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7721)
+#define UBC_BARA		0xa4ffffb0
+#define UBC_BAMRA		0xa4ffffb4
+#define UBC_BBRA		0xa4ffffb8
+#define UBC_BASRA		0xffffffe4
+#define UBC_BARB		0xa4ffffa0
+#define UBC_BAMRB		0xa4ffffa4
+#define UBC_BBRB		0xa4ffffa8
+#define UBC_BASRB		0xffffffe8
+#define UBC_BDRB		0xa4ffff90
+#define UBC_BDMRB		0xa4ffff94
+#define UBC_BRCR		0xa4ffff98
+#else
+#define UBC_BARA                0xffffffb0
+#define UBC_BAMRA               0xffffffb4
+#define UBC_BBRA                0xffffffb8
+#define UBC_BASRA               0xffffffe4
+#define UBC_BARB                0xffffffa0
+#define UBC_BAMRB               0xffffffa4
+#define UBC_BBRB                0xffffffa8
+#define UBC_BASRB               0xffffffe8
+#define UBC_BDRB                0xffffff90
+#define UBC_BDMRB               0xffffff94
+#define UBC_BRCR                0xffffff98
+#endif
+
+#endif /* __ASM_CPU_SH3_UBC_H */
diff --git a/arch/sh/include/cpu-sh3/cpu/watchdog.h b/arch/sh/include/cpu-sh3/cpu/watchdog.h
new file mode 100644
index 000000000000..4ee0347298d8
--- /dev/null
+++ b/arch/sh/include/cpu-sh3/cpu/watchdog.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-sh/cpu-sh3/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH3_WATCHDOG_H
+#define __ASM_CPU_SH3_WATCHDOG_H
+
+/* Register definitions */
+#define WTCNT		0xffffff84
+#define WTCSR		0xffffff86
+
+/* Bit definitions */
+#define WTCSR_TME	0x80
+#define WTCSR_WT	0x40
+#define WTCSR_RSTS	0x20
+#define WTCSR_WOVF	0x10
+#define WTCSR_IOVF	0x08
+
+#endif /* __ASM_CPU_SH3_WATCHDOG_H */
+
diff --git a/arch/sh/include/cpu-sh4/cpu/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h
new file mode 100644
index 000000000000..a3fa733c1c7d
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/addrspace.h
@@ -0,0 +1,35 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Kaz Kojima
+ *
+ * Defitions for the address spaces of the SH-4 CPUs.
+ */
+#ifndef __ASM_CPU_SH4_ADDRSPACE_H
+#define __ASM_CPU_SH4_ADDRSPACE_H
+
+#define P0SEG		0x00000000
+#define P1SEG		0x80000000
+#define P2SEG		0xa0000000
+#define P3SEG		0xc0000000
+#define P4SEG		0xe0000000
+
+/* Detailed P4SEG  */
+#define P4SEG_STORE_QUE	(P4SEG)
+#define P4SEG_IC_ADDR	0xf0000000
+#define P4SEG_IC_DATA	0xf1000000
+#define P4SEG_ITLB_ADDR	0xf2000000
+#define P4SEG_ITLB_DATA	0xf3000000
+#define P4SEG_OC_ADDR	0xf4000000
+#define P4SEG_OC_DATA	0xf5000000
+#define P4SEG_TLB_ADDR	0xf6000000
+#define P4SEG_TLB_DATA	0xf7000000
+#define P4SEG_REG_BASE	0xff000000
+
+#define PA_AREA5_IO	0xb4000000	/* Area 5 IO Memory */
+#define PA_AREA6_IO	0xb8000000	/* Area 6 IO Memory */
+
+#endif /* __ASM_CPU_SH4_ADDRSPACE_H */
+
diff --git a/arch/sh/include/cpu-sh4/cpu/cache.h b/arch/sh/include/cpu-sh4/cpu/cache.h
new file mode 100644
index 000000000000..1c61ebf5c8e3
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/cache.h
@@ -0,0 +1,42 @@
+/*
+ * include/asm-sh/cpu-sh4/cache.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_CACHE_H
+#define __ASM_CPU_SH4_CACHE_H
+
+#define L1_CACHE_SHIFT	5
+
+#define SH_CACHE_VALID		1
+#define SH_CACHE_UPDATED	2
+#define SH_CACHE_COMBINED	4
+#define SH_CACHE_ASSOC		8
+
+#define CCR		0xff00001c	/* Address of Cache Control Register */
+#define CCR_CACHE_OCE	0x0001	/* Operand Cache Enable */
+#define CCR_CACHE_WT	0x0002	/* Write-Through (for P0,U0,P3) (else writeback)*/
+#define CCR_CACHE_CB	0x0004	/* Copy-Back (for P1) (else writethrough) */
+#define CCR_CACHE_OCI	0x0008	/* OC Invalidate */
+#define CCR_CACHE_ORA	0x0020	/* OC RAM Mode */
+#define CCR_CACHE_OIX	0x0080	/* OC Index Enable */
+#define CCR_CACHE_ICE	0x0100	/* Instruction Cache Enable */
+#define CCR_CACHE_ICI	0x0800	/* IC Invalidate */
+#define CCR_CACHE_IIX	0x8000	/* IC Index Enable */
+#ifndef CONFIG_CPU_SH4A
+#define CCR_CACHE_EMODE	0x80000000	/* EMODE Enable */
+#endif
+
+/* Default CCR setup: 8k+16k-byte cache,P1-wb,enable */
+#define CCR_CACHE_ENABLE	(CCR_CACHE_OCE|CCR_CACHE_ICE)
+#define CCR_CACHE_INVALIDATE	(CCR_CACHE_OCI|CCR_CACHE_ICI)
+
+#define CACHE_IC_ADDRESS_ARRAY	0xf0000000
+#define CACHE_OC_ADDRESS_ARRAY	0xf4000000
+
+#endif /* __ASM_CPU_SH4_CACHE_H */
+
diff --git a/arch/sh/include/cpu-sh4/cpu/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
new file mode 100644
index 000000000000..065306d376eb
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/cacheflush.h
@@ -0,0 +1,43 @@
+/*
+ * include/asm-sh/cpu-sh4/cacheflush.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_CACHEFLUSH_H
+#define __ASM_CPU_SH4_CACHEFLUSH_H
+
+/*
+ *  Caches are broken on SH-4 (unless we use write-through
+ *  caching; in which case they're only semi-broken),
+ *  so we need them.
+ */
+void flush_cache_all(void);
+void flush_dcache_all(void);
+void flush_cache_mm(struct mm_struct *mm);
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+		       unsigned long end);
+void flush_cache_page(struct vm_area_struct *vma, unsigned long addr,
+		      unsigned long pfn);
+void flush_dcache_page(struct page *pg);
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+void flush_icache_range(unsigned long start, unsigned long end);
+void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+			     unsigned long addr, int len);
+
+#define flush_icache_page(vma,pg)		do { } while (0)
+
+/* Initialization of P3 area for copy_user_page */
+void p3_cache_init(void);
+
+#define PG_mapped	PG_arch_1
+
+#endif /* __ASM_CPU_SH4_CACHEFLUSH_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h
new file mode 100644
index 000000000000..71b426a6e482
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h
@@ -0,0 +1,39 @@
+#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H
+#define __ASM_SH_CPU_SH4_DMA_SH7780_H
+
+#define REQ_HE	0x000000C0
+#define REQ_H	0x00000080
+#define REQ_LE	0x00000040
+#define TM_BURST 0x0000020
+#define TS_8	0x00000000
+#define TS_16	0x00000008
+#define TS_32	0x00000010
+#define TS_16BLK	0x00000018
+#define TS_32BLK	0x00100000
+
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ *
+ * Defaults to a 64-bit transfer size.
+ */
+enum {
+	XMIT_SZ_8BIT,
+	XMIT_SZ_16BIT,
+	XMIT_SZ_32BIT,
+	XMIT_SZ_128BIT,
+	XMIT_SZ_256BIT,
+};
+
+/*
+ * The DMA count is defined as the number of bytes to transfer.
+ */
+static unsigned int ts_shift[] __maybe_unused = {
+	[XMIT_SZ_8BIT]		= 0,
+	[XMIT_SZ_16BIT]		= 1,
+	[XMIT_SZ_32BIT]		= 2,
+	[XMIT_SZ_128BIT]	= 4,
+	[XMIT_SZ_256BIT]	= 5,
+};
+
+#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h
new file mode 100644
index 000000000000..235b7cd1fc9a
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/dma.h
@@ -0,0 +1,65 @@
+#ifndef __ASM_CPU_SH4_DMA_H
+#define __ASM_CPU_SH4_DMA_H
+
+#define DMAOR_INIT	( 0x8000 | DMAOR_DME )
+
+/* SH7751/7760/7780 DMA IRQ sources */
+#define DMTE0_IRQ	34
+#define DMTE1_IRQ	35
+#define DMTE2_IRQ	36
+#define DMTE3_IRQ	37
+#define DMTE4_IRQ	44
+#define DMTE5_IRQ	45
+#define DMTE6_IRQ	46
+#define DMTE7_IRQ	47
+#define DMAE_IRQ	38
+
+#ifdef CONFIG_CPU_SH4A
+#define SH_DMAC_BASE	0xfc808020
+
+#define CHCR_TS_MASK	0x18
+#define CHCR_TS_SHIFT	3
+
+#include <cpu/dma-sh7780.h>
+#else
+#define SH_DMAC_BASE	0xffa00000
+
+/* Definitions for the SuperH DMAC */
+#define TM_BURST	0x0000080
+#define TS_8		0x00000010
+#define TS_16		0x00000020
+#define TS_32		0x00000030
+#define TS_64		0x00000000
+
+#define CHCR_TS_MASK	0x70
+#define CHCR_TS_SHIFT	4
+
+#define DMAOR_COD	0x00000008
+
+/*
+ * The SuperH DMAC supports a number of transmit sizes, we list them here,
+ * with their respective values as they appear in the CHCR registers.
+ *
+ * Defaults to a 64-bit transfer size.
+ */
+enum {
+	XMIT_SZ_64BIT,
+	XMIT_SZ_8BIT,
+	XMIT_SZ_16BIT,
+	XMIT_SZ_32BIT,
+	XMIT_SZ_256BIT,
+};
+
+/*
+ * The DMA count is defined as the number of bytes to transfer.
+ */
+static unsigned int ts_shift[] __maybe_unused = {
+	[XMIT_SZ_64BIT]		= 3,
+	[XMIT_SZ_8BIT]		= 0,
+	[XMIT_SZ_16BIT]		= 1,
+	[XMIT_SZ_32BIT]		= 2,
+	[XMIT_SZ_256BIT]	= 5,
+};
+#endif
+
+#endif /* __ASM_CPU_SH4_DMA_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/fpu.h b/arch/sh/include/cpu-sh4/cpu/fpu.h
new file mode 100644
index 000000000000..febef7342528
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/fpu.h
@@ -0,0 +1,32 @@
+/*
+ * linux/arch/sh/kernel/cpu/sh4/sh4_fpu.h
+ *
+ * Copyright (C) 2006 STMicroelectronics Limited
+ * Author: Carl Shaw <carl.shaw@st.com>
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License Version 2.  See linux/COPYING for more information.
+ *
+ * Definitions for SH4 FPU operations
+ */
+
+#ifndef __CPU_SH4_FPU_H
+#define __CPU_SH4_FPU_H
+
+#define FPSCR_ENABLE_MASK	0x00000f80UL
+
+#define FPSCR_FMOV_DOUBLE	(1<<1)
+
+#define FPSCR_CAUSE_INEXACT	(1<<12)
+#define FPSCR_CAUSE_UNDERFLOW	(1<<13)
+#define FPSCR_CAUSE_OVERFLOW	(1<<14)
+#define FPSCR_CAUSE_DIVZERO	(1<<15)
+#define FPSCR_CAUSE_INVALID	(1<<16)
+#define FPSCR_CAUSE_ERROR 	(1<<17)
+
+#define FPSCR_DBL_PRECISION	(1<<19)
+#define FPSCR_ROUNDING_MODE(x)	((x >> 20) & 3)
+#define FPSCR_RM_NEAREST	(0)
+#define FPSCR_RM_ZERO		(1)
+
+#endif
diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h
new file mode 100644
index 000000000000..c23af81c2e70
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/freq.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-sh/cpu-sh4/freq.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_FREQ_H
+#define __ASM_CPU_SH4_FREQ_H
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7723) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7343) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7366)
+#define FRQCR		        0xa4150000
+#define VCLKCR			0xa4150004
+#define SCLKACR			0xa4150008
+#define SCLKBCR			0xa415000c
+#define IrDACLKCR		0xa4150010
+#define MSTPCR0			0xa4150030
+#define MSTPCR1			0xa4150034
+#define MSTPCR2			0xa4150038
+#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+      defined(CONFIG_CPU_SUBTYPE_SH7780)
+#define	FRQCR			0xffc80000
+#elif defined(CONFIG_CPU_SUBTYPE_SH7785)
+#define FRQCR0			0xffc80000
+#define FRQCR1			0xffc80004
+#define FRQMR1			0xffc80014
+#elif defined(CONFIG_CPU_SUBTYPE_SHX3)
+#define FRQCR			0xffc00014
+#else
+#define FRQCR			0xffc00000
+#define FRQCR_PSTBY		0x0200
+#define FRQCR_PLLEN		0x0400
+#define FRQCR_CKOEN		0x0800
+#endif
+#define MIN_DIVISOR_NR		0
+#define MAX_DIVISOR_NR		3
+
+#endif /* __ASM_CPU_SH4_FREQ_H */
+
diff --git a/arch/sh/include/cpu-sh4/cpu/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
new file mode 100644
index 000000000000..9ea8eb27b18e
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/mmu_context.h
@@ -0,0 +1,63 @@
+/*
+ * include/asm-sh/cpu-sh4/mmu_context.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_MMU_CONTEXT_H
+#define __ASM_CPU_SH4_MMU_CONTEXT_H
+
+#define MMU_PTEH	0xFF000000	/* Page table entry register HIGH */
+#define MMU_PTEL	0xFF000004	/* Page table entry register LOW */
+#define MMU_TTB		0xFF000008	/* Translation table base register */
+#define MMU_TEA		0xFF00000C	/* TLB Exception Address */
+#define MMU_PTEA	0xFF000034	/* Page table entry assistance register */
+
+#define MMUCR		0xFF000010	/* MMU Control Register */
+
+#define MMU_ITLB_ADDRESS_ARRAY	0xF2000000
+#define MMU_UTLB_ADDRESS_ARRAY	0xF6000000
+#define MMU_PAGE_ASSOC_BIT	0x80
+
+#define MMUCR_TI		(1<<2)
+
+#ifdef CONFIG_X2TLB
+#define MMUCR_ME		(1 << 7)
+#else
+#define MMUCR_ME		(0)
+#endif
+
+#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40)
+#define MMUCR_SE		(1 << 4)
+#else
+#define MMUCR_SE		(0)
+#endif
+
+#ifdef CONFIG_SH_STORE_QUEUES
+#define MMUCR_SQMD		(1 << 9)
+#else
+#define MMUCR_SQMD		(0)
+#endif
+
+#define MMU_NTLB_ENTRIES	64
+#define MMU_CONTROL_INIT	(0x05|MMUCR_SQMD|MMUCR_ME|MMUCR_SE)
+
+#define MMU_ITLB_DATA_ARRAY	0xF3000000
+#define MMU_UTLB_DATA_ARRAY	0xF7000000
+
+#define MMU_UTLB_ENTRIES	   64
+#define MMU_U_ENTRY_SHIFT	    8
+#define MMU_UTLB_VALID		0x100
+#define MMU_ITLB_ENTRIES	    4
+#define MMU_I_ENTRY_SHIFT	    8
+#define MMU_ITLB_VALID		0x100
+
+#define TRA	0xff000020
+#define EXPEVT	0xff000024
+#define INTEVT	0xff000028
+
+#endif /* __ASM_CPU_SH4_MMU_CONTEXT_H */
+
diff --git a/arch/sh/include/cpu-sh4/cpu/rtc.h b/arch/sh/include/cpu-sh4/cpu/rtc.h
new file mode 100644
index 000000000000..25b1e6adfe8c
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/rtc.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_SH_CPU_SH4_RTC_H
+#define __ASM_SH_CPU_SH4_RTC_H
+
+#ifdef CONFIG_CPU_SUBTYPE_SH7723
+#define rtc_reg_size		sizeof(u16)
+#else
+#define rtc_reg_size		sizeof(u32)
+#endif
+
+#define RTC_BIT_INVERTED	0x40	/* bug on SH7750, SH7750S */
+#define RTC_DEF_CAPABILITIES	RTC_CAP_4_DIGIT_YEAR
+
+#endif /* __ASM_SH_CPU_SH4_RTC_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sigcontext.h b/arch/sh/include/cpu-sh4/cpu/sigcontext.h
new file mode 100644
index 000000000000..ab392f120e06
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/sigcontext.h
@@ -0,0 +1,24 @@
+#ifndef __ASM_CPU_SH4_SIGCONTEXT_H
+#define __ASM_CPU_SH4_SIGCONTEXT_H
+
+struct sigcontext {
+	unsigned long	oldmask;
+
+	/* CPU registers */
+	unsigned long sc_regs[16];
+	unsigned long sc_pc;
+	unsigned long sc_pr;
+	unsigned long sc_sr;
+	unsigned long sc_gbr;
+	unsigned long sc_mach;
+	unsigned long sc_macl;
+
+	/* FPU registers */
+	unsigned long sc_fpregs[16];
+	unsigned long sc_xfpregs[16];
+	unsigned int sc_fpscr;
+	unsigned int sc_fpul;
+	unsigned int sc_ownedfp;
+};
+
+#endif /* __ASM_CPU_SH4_SIGCONTEXT_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/sq.h b/arch/sh/include/cpu-sh4/cpu/sq.h
new file mode 100644
index 000000000000..586d6491816a
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/sq.h
@@ -0,0 +1,35 @@
+/*
+ * include/asm-sh/cpu-sh4/sq.h
+ *
+ * Copyright (C) 2001, 2002, 2003  Paul Mundt
+ * Copyright (C) 2001, 2002  M. R. Brown
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_SQ_H
+#define __ASM_CPU_SH4_SQ_H
+
+#include <asm/addrspace.h>
+
+/*
+ * Store queues range from e0000000-e3fffffc, allowing approx. 64MB to be
+ * mapped to any physical address space. Since data is written (and aligned)
+ * to 32-byte boundaries, we need to be sure that all allocations are aligned.
+ */
+#define SQ_SIZE                 32
+#define SQ_ALIGN_MASK           (~(SQ_SIZE - 1))
+#define SQ_ALIGN(addr)          (((addr)+SQ_SIZE-1) & SQ_ALIGN_MASK)
+
+#define SQ_QACR0		(P4SEG_REG_BASE  + 0x38)
+#define SQ_QACR1		(P4SEG_REG_BASE  + 0x3c)
+#define SQ_ADDRMAX              (P4SEG_STORE_QUE + 0x04000000)
+
+/* arch/sh/kernel/cpu/sh4/sq.c */
+unsigned long sq_remap(unsigned long phys, unsigned int size,
+		       const char *name, unsigned long flags);
+void sq_unmap(unsigned long vaddr);
+void sq_flush_range(unsigned long start, unsigned int len);
+
+#endif /* __ASM_CPU_SH4_SQ_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/timer.h b/arch/sh/include/cpu-sh4/cpu/timer.h
new file mode 100644
index 000000000000..d1e796b96888
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/timer.h
@@ -0,0 +1,60 @@
+/*
+ * include/asm-sh/cpu-sh4/timer.h
+ *
+ * Copyright (C) 2004 Lineo Solutions, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_TIMER_H
+#define __ASM_CPU_SH4_TIMER_H
+
+/*
+ * ---------------------------------------------------------------------------
+ * TMU Common definitions for SH4 processors
+ *	SH7750S/SH7750R
+ *	SH7751/SH7751R
+ *	SH7760
+ *	SH-X3
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_CPU_SUBTYPE_SHX3
+#define TMU_012_BASE	0xffc10000
+#define TMU_345_BASE	0xffc20000
+#else
+#define TMU_012_BASE	0xffd80000
+#define TMU_345_BASE	0xfe100000
+#endif
+
+#define TMU_TOCR	TMU_012_BASE	/* Not supported on all CPUs */
+
+#define TMU_012_TSTR	(TMU_012_BASE + 0x04)
+#define TMU_345_TSTR	(TMU_345_BASE + 0x04)
+
+#define TMU0_TCOR	(TMU_012_BASE + 0x08)
+#define TMU0_TCNT	(TMU_012_BASE + 0x0c)
+#define TMU0_TCR	(TMU_012_BASE + 0x10)
+
+#define TMU1_TCOR       (TMU_012_BASE + 0x14)
+#define TMU1_TCNT       (TMU_012_BASE + 0x18)
+#define TMU1_TCR        (TMU_012_BASE + 0x1c)
+
+#define TMU2_TCOR       (TMU_012_BASE + 0x20)
+#define TMU2_TCNT       (TMU_012_BASE + 0x24)
+#define TMU2_TCR	(TMU_012_BASE + 0x28)
+#define TMU2_TCPR	(TMU_012_BASE + 0x2c)
+
+#define TMU3_TCOR	(TMU_345_BASE + 0x08)
+#define TMU3_TCNT	(TMU_345_BASE + 0x0c)
+#define TMU3_TCR	(TMU_345_BASE + 0x10)
+
+#define TMU4_TCOR	(TMU_345_BASE + 0x14)
+#define TMU4_TCNT	(TMU_345_BASE + 0x18)
+#define TMU4_TCR	(TMU_345_BASE + 0x1c)
+
+#define TMU5_TCOR	(TMU_345_BASE + 0x20)
+#define TMU5_TCNT	(TMU_345_BASE + 0x24)
+#define TMU5_TCR	(TMU_345_BASE + 0x28)
+
+#endif /* __ASM_CPU_SH4_TIMER_H */
diff --git a/arch/sh/include/cpu-sh4/cpu/ubc.h b/arch/sh/include/cpu-sh4/cpu/ubc.h
new file mode 100644
index 000000000000..c86e17050935
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/ubc.h
@@ -0,0 +1,64 @@
+/*
+ * include/asm-sh/cpu-sh4/ubc.h
+ *
+ * Copyright (C) 1999 Niibe Yutaka
+ * Copyright (C) 2003 Paul Mundt
+ * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_UBC_H
+#define __ASM_CPU_SH4_UBC_H
+
+#if defined(CONFIG_CPU_SH4A)
+#define UBC_CBR0		0xff200000
+#define UBC_CRR0		0xff200004
+#define UBC_CAR0		0xff200008
+#define UBC_CAMR0		0xff20000c
+#define UBC_CBR1		0xff200020
+#define UBC_CRR1		0xff200024
+#define UBC_CAR1		0xff200028
+#define UBC_CAMR1		0xff20002c
+#define UBC_CDR1		0xff200030
+#define UBC_CDMR1		0xff200034
+#define UBC_CETR1		0xff200038
+#define UBC_CCMFR		0xff200600
+#define UBC_CBCR		0xff200620
+
+/* CBR	*/
+#define UBC_CBR_AIE		(0x01<<30)
+#define UBC_CBR_ID_INST		(0x01<<4)
+#define UBC_CBR_RW_READ		(0x01<<1)
+#define UBC_CBR_CE		(0x01)
+
+#define	UBC_CBR_AIV_MASK	(0x00FF0000)
+#define	UBC_CBR_AIV_SHIFT	(16)
+#define UBC_CBR_AIV_SET(asid)	(((asid)<<UBC_CBR_AIV_SHIFT) & UBC_CBR_AIV_MASK)
+
+#define UBC_CBR_INIT		0x20000000
+
+/* CRR	*/
+#define UBC_CRR_RES		(0x01<<13)
+#define UBC_CRR_PCB		(0x01<<1)
+#define UBC_CRR_BIE		(0x01)
+
+#define UBC_CRR_INIT		0x00002000
+
+#else	/* CONFIG_CPU_SH4 */
+#define UBC_BARA		0xff200000
+#define UBC_BAMRA		0xff200004
+#define UBC_BBRA		0xff200008
+#define UBC_BASRA		0xff000014
+#define UBC_BARB		0xff20000c
+#define UBC_BAMRB		0xff200010
+#define UBC_BBRB		0xff200014
+#define UBC_BASRB		0xff000018
+#define UBC_BDRB		0xff200018
+#define UBC_BDMRB		0xff20001c
+#define UBC_BRCR		0xff200020
+#endif	/* CONFIG_CPU_SH4 */
+
+#endif /* __ASM_CPU_SH4_UBC_H */
+
diff --git a/arch/sh/include/cpu-sh4/cpu/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h
new file mode 100644
index 000000000000..259f6a0ce23d
--- /dev/null
+++ b/arch/sh/include/cpu-sh4/cpu/watchdog.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-sh/cpu-sh4/watchdog.h
+ *
+ * Copyright (C) 2002, 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_CPU_SH4_WATCHDOG_H
+#define __ASM_CPU_SH4_WATCHDOG_H
+
+/* Register definitions */
+#define WTCNT		0xffc00008
+#define WTCSR		0xffc0000c
+
+/* Bit definitions */
+#define WTCSR_TME	0x80
+#define WTCSR_WT	0x40
+#define WTCSR_RSTS	0x20
+#define WTCSR_WOVF	0x10
+#define WTCSR_IOVF	0x08
+
+#endif /* __ASM_CPU_SH4_WATCHDOG_H */
+
diff --git a/arch/sh/include/cpu-sh5/cpu/addrspace.h b/arch/sh/include/cpu-sh5/cpu/addrspace.h
new file mode 100644
index 000000000000..dc36b9a03af6
--- /dev/null
+++ b/arch/sh/include/cpu-sh5/cpu/addrspace.h
@@ -0,0 +1,11 @@
+#ifndef __ASM_SH_CPU_SH5_ADDRSPACE_H
+#define __ASM_SH_CPU_SH5_ADDRSPACE_H
+
+#define	PHYS_PERIPHERAL_BLOCK	0x09000000
+#define PHYS_DMAC_BLOCK		0x0e000000
+#define PHYS_PCI_BLOCK		0x60000000
+#define PHYS_EMI_BLOCK		0xff000000
+
+/* No segmentation.. */
+
+#endif /* __ASM_SH_CPU_SH5_ADDRSPACE_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/cache.h b/arch/sh/include/cpu-sh5/cpu/cache.h
new file mode 100644
index 000000000000..ed050ab526f2
--- /dev/null
+++ b/arch/sh/include/cpu-sh5/cpu/cache.h
@@ -0,0 +1,97 @@
+#ifndef __ASM_SH_CPU_SH5_CACHE_H
+#define __ASM_SH_CPU_SH5_CACHE_H
+
+/*
+ * include/asm-sh/cpu-sh5/cache.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2003, 2004  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#define L1_CACHE_SHIFT		5
+
+/* Valid and Dirty bits */
+#define SH_CACHE_VALID		(1LL<<0)
+#define SH_CACHE_UPDATED	(1LL<<57)
+
+/* Unimplemented compat bits.. */
+#define SH_CACHE_COMBINED	0
+#define SH_CACHE_ASSOC		0
+
+/* Cache flags */
+#define SH_CACHE_MODE_WT	(1LL<<0)
+#define SH_CACHE_MODE_WB	(1LL<<1)
+
+/*
+ * Control Registers.
+ */
+#define ICCR_BASE	0x01600000	/* Instruction Cache Control Register */
+#define ICCR_REG0	0		/* Register 0 offset */
+#define ICCR_REG1	1		/* Register 1 offset */
+#define ICCR0		ICCR_BASE+ICCR_REG0
+#define ICCR1		ICCR_BASE+ICCR_REG1
+
+#define ICCR0_OFF	0x0		/* Set ICACHE off */
+#define ICCR0_ON	0x1		/* Set ICACHE on */
+#define ICCR0_ICI	0x2		/* Invalidate all in IC */
+
+#define ICCR1_NOLOCK	0x0		/* Set No Locking */
+
+#define OCCR_BASE	0x01E00000	/* Operand Cache Control Register */
+#define OCCR_REG0	0		/* Register 0 offset */
+#define OCCR_REG1	1		/* Register 1 offset */
+#define OCCR0		OCCR_BASE+OCCR_REG0
+#define OCCR1		OCCR_BASE+OCCR_REG1
+
+#define OCCR0_OFF	0x0		/* Set OCACHE off */
+#define OCCR0_ON	0x1		/* Set OCACHE on */
+#define OCCR0_OCI	0x2		/* Invalidate all in OC */
+#define OCCR0_WT	0x4		/* Set OCACHE in WT Mode */
+#define OCCR0_WB	0x0		/* Set OCACHE in WB Mode */
+
+#define OCCR1_NOLOCK	0x0		/* Set No Locking */
+
+/*
+ * SH-5
+ * A bit of description here, for neff=32.
+ *
+ *                               |<--- tag  (19 bits) --->|
+ * +-----------------------------+-----------------+------+----------+------+
+ * |                             |                 | ways |set index |offset|
+ * +-----------------------------+-----------------+------+----------+------+
+ *                                ^                 2 bits   8 bits   5 bits
+ *                                +- Bit 31
+ *
+ * Cacheline size is based on offset: 5 bits = 32 bytes per line
+ * A cache line is identified by a tag + set but OCACHETAG/ICACHETAG
+ * have a broader space for registers. These are outlined by
+ * CACHE_?C_*_STEP below.
+ *
+ */
+
+/* Instruction cache */
+#define CACHE_IC_ADDRESS_ARRAY 0x01000000
+
+/* Operand Cache */
+#define CACHE_OC_ADDRESS_ARRAY 0x01800000
+
+/* These declarations relate to cache 'synonyms' in the operand cache.  A
+   'synonym' occurs where effective address bits overlap between those used for
+   indexing the cache sets and those passed to the MMU for translation.  In the
+   case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */
+
+#define CACHE_OC_N_SYNBITS  1               /* Number of synonym bits */
+#define CACHE_OC_SYN_SHIFT  12
+/* Mask to select synonym bit(s) */
+#define CACHE_OC_SYN_MASK   (((1UL<<CACHE_OC_N_SYNBITS)-1)<<CACHE_OC_SYN_SHIFT)
+
+/*
+ * Instruction cache can't be invalidated based on physical addresses.
+ * No Instruction Cache defines required, then.
+ */
+
+#endif /* __ASM_SH_CPU_SH5_CACHE_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/cacheflush.h b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
new file mode 100644
index 000000000000..5a11f0b7e66a
--- /dev/null
+++ b/arch/sh/include/cpu-sh5/cpu/cacheflush.h
@@ -0,0 +1,33 @@
+#ifndef __ASM_SH_CPU_SH5_CACHEFLUSH_H
+#define __ASM_SH_CPU_SH5_CACHEFLUSH_H
+
+#ifndef __ASSEMBLY__
+
+struct vm_area_struct;
+struct page;
+struct mm_struct;
+
+extern void flush_cache_all(void);
+extern void flush_cache_mm(struct mm_struct *mm);
+extern void flush_cache_sigtramp(unsigned long vaddr);
+extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+			      unsigned long end);
+extern void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn);
+extern void flush_dcache_page(struct page *pg);
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_icache_user_range(struct vm_area_struct *vma,
+				    struct page *page, unsigned long addr,
+				    int len);
+
+#define flush_cache_dup_mm(mm)	flush_cache_mm(mm)
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+#define flush_icache_page(vma, page)	do { } while (0)
+void p3_cache_init(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_SH_CPU_SH5_CACHEFLUSH_H */
+
diff --git a/arch/sh/include/cpu-sh5/cpu/dma.h b/arch/sh/include/cpu-sh5/cpu/dma.h
new file mode 100644
index 000000000000..7bf6bb3d35ed
--- /dev/null
+++ b/arch/sh/include/cpu-sh5/cpu/dma.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SH_CPU_SH5_DMA_H
+#define __ASM_SH_CPU_SH5_DMA_H
+
+/* Nothing yet */
+
+#endif /* __ASM_SH_CPU_SH5_DMA_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/irq.h b/arch/sh/include/cpu-sh5/cpu/irq.h
new file mode 100644
index 000000000000..f0f0756e6e84
--- /dev/null
+++ b/arch/sh/include/cpu-sh5/cpu/irq.h
@@ -0,0 +1,117 @@
+#ifndef __ASM_SH_CPU_SH5_IRQ_H
+#define __ASM_SH_CPU_SH5_IRQ_H
+
+/*
+ * include/asm-sh/cpu-sh5/irq.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+
+/*
+ * Encoded IRQs are not considered worth to be supported.
+ * Main reason is that there's no per-encoded-interrupt
+ * enable/disable mechanism (as there was in SH3/4).
+ * An all enabled/all disabled is worth only if there's
+ * a cascaded IC to disable/enable/ack on. Until such
+ * IC is available there's no such support.
+ *
+ * Presumably Encoded IRQs may use extra IRQs beyond 64,
+ * below. Some logic must be added to cope with IRQ_IRL?
+ * in an exclusive way.
+ *
+ * Priorities are set at Platform level, when IRQ_IRL0-3
+ * are set to 0 Encoding is allowed. Otherwise it's not
+ * allowed.
+ */
+
+/* Independent IRQs */
+#define IRQ_IRL0	0
+#define IRQ_IRL1	1
+#define IRQ_IRL2	2
+#define IRQ_IRL3	3
+
+#define IRQ_INTA	4
+#define IRQ_INTB	5
+#define IRQ_INTC	6
+#define IRQ_INTD	7
+
+#define IRQ_SERR	12
+#define IRQ_ERR		13
+#define IRQ_PWR3	14
+#define IRQ_PWR2	15
+#define IRQ_PWR1	16
+#define IRQ_PWR0	17
+
+#define IRQ_DMTE0	18
+#define IRQ_DMTE1	19
+#define IRQ_DMTE2	20
+#define IRQ_DMTE3	21
+#define IRQ_DAERR	22
+
+#define IRQ_TUNI0	32
+#define IRQ_TUNI1	33
+#define IRQ_TUNI2	34
+#define IRQ_TICPI2	35
+
+#define IRQ_ATI		36
+#define IRQ_PRI		37
+#define IRQ_CUI		38
+
+#define IRQ_ERI		39
+#define IRQ_RXI		40
+#define IRQ_BRI		41
+#define IRQ_TXI		42
+
+#define IRQ_ITI		63
+
+#define NR_INTC_IRQS	64
+
+#ifdef CONFIG_SH_CAYMAN
+#define NR_EXT_IRQS     32
+#define START_EXT_IRQS  64
+
+/* PCI bus 2 uses encoded external interrupts on the Cayman board */
+#define IRQ_P2INTA      (START_EXT_IRQS + (3*8) + 0)
+#define IRQ_P2INTB      (START_EXT_IRQS + (3*8) + 1)
+#define IRQ_P2INTC      (START_EXT_IRQS + (3*8) + 2)
+#define IRQ_P2INTD      (START_EXT_IRQS + (3*8) + 3)
+
+#define I8042_KBD_IRQ	(START_EXT_IRQS + 2)
+#define I8042_AUX_IRQ	(START_EXT_IRQS + 6)
+
+#define IRQ_CFCARD	(START_EXT_IRQS + 7)
+#define IRQ_PCMCIA	(0)
+
+#else
+#define NR_EXT_IRQS	0
+#endif
+
+/* Default IRQs, fixed */
+#define TIMER_IRQ	IRQ_TUNI0
+#define RTC_IRQ		IRQ_CUI
+
+/* Default Priorities, Platform may choose differently */
+#define	NO_PRIORITY	0	/* Disabled */
+#define TIMER_PRIORITY	2
+#define RTC_PRIORITY	TIMER_PRIORITY
+#define SCIF_PRIORITY	3
+#define INTD_PRIORITY	3
+#define	IRL3_PRIORITY	4
+#define INTC_PRIORITY	6
+#define	IRL2_PRIORITY	7
+#define INTB_PRIORITY	9
+#define	IRL1_PRIORITY	10
+#define INTA_PRIORITY	12
+#define	IRL0_PRIORITY	13
+#define TOP_PRIORITY	15
+
+extern int intc_evt_to_irq[(0xE20/0x20)+1];
+int intc_irq_describe(char* p, int irq);
+extern int platform_int_priority[NR_INTC_IRQS];
+
+#endif /* __ASM_SH_CPU_SH5_IRQ_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/mmu_context.h b/arch/sh/include/cpu-sh5/cpu/mmu_context.h
new file mode 100644
index 000000000000..68a1d2cff457
--- /dev/null
+++ b/arch/sh/include/cpu-sh5/cpu/mmu_context.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_SH_CPU_SH5_MMU_CONTEXT_H
+#define __ASM_SH_CPU_SH5_MMU_CONTEXT_H
+
+/* Common defines */
+#define TLB_STEP	0x00000010
+#define TLB_PTEH	0x00000000
+#define TLB_PTEL	0x00000008
+
+/* PTEH defines */
+#define PTEH_ASID_SHIFT	2
+#define PTEH_VALID	0x0000000000000001
+#define PTEH_SHARED	0x0000000000000002
+#define PTEH_MATCH_ASID	0x00000000000003ff
+
+#ifndef __ASSEMBLY__
+/* This has to be a common function because the next location to fill
+ * information is shared. */
+extern void __do_tlb_refill(unsigned long address, unsigned long long is_text_not_data, pte_t *pte);
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_SH_CPU_SH5_MMU_CONTEXT_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/registers.h b/arch/sh/include/cpu-sh5/cpu/registers.h
new file mode 100644
index 000000000000..6664ea6f1566
--- /dev/null
+++ b/arch/sh/include/cpu-sh5/cpu/registers.h
@@ -0,0 +1,106 @@
+#ifndef __ASM_SH_CPU_SH5_REGISTERS_H
+#define __ASM_SH_CPU_SH5_REGISTERS_H
+
+/*
+ * include/asm-sh/cpu-sh5/registers.h
+ *
+ * Copyright (C) 2000, 2001  Paolo Alberelli
+ * Copyright (C) 2004  Richard Curnow
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifdef __ASSEMBLY__
+/* =====================================================================
+**
+** Section 1: acts on assembly sources pre-processed by GPP ( <source.S>).
+**	      Assigns symbolic names to control & target registers.
+*/
+
+/*
+ * Define some useful aliases for control registers.
+ */
+#define SR	cr0
+#define SSR	cr1
+#define PSSR	cr2
+			/* cr3 UNDEFINED */
+#define INTEVT	cr4
+#define EXPEVT	cr5
+#define PEXPEVT	cr6
+#define TRA	cr7
+#define SPC	cr8
+#define PSPC	cr9
+#define RESVEC	cr10
+#define VBR	cr11
+			/* cr12 UNDEFINED */
+#define TEA	cr13
+			/* cr14-cr15 UNDEFINED */
+#define DCR	cr16
+#define KCR0	cr17
+#define KCR1	cr18
+			/* cr19-cr31 UNDEFINED */
+			/* cr32-cr61 RESERVED */
+#define CTC	cr62
+#define USR	cr63
+
+/*
+ * ABI dependent registers (general purpose set)
+ */
+#define RET	r2
+#define ARG1	r2
+#define ARG2	r3
+#define ARG3	r4
+#define ARG4	r5
+#define ARG5	r6
+#define ARG6	r7
+#define SP	r15
+#define LINK	r18
+#define ZERO	r63
+
+/*
+ * Status register defines: used only by assembly sources (and
+ * 			    syntax independednt)
+ */
+#define SR_RESET_VAL	0x0000000050008000
+#define SR_HARMLESS	0x00000000500080f0	/* Write ignores for most */
+#define SR_ENABLE_FPU	0xffffffffffff7fff	/* AND with this */
+
+#if defined (CONFIG_SH64_SR_WATCH)
+#define SR_ENABLE_MMU	0x0000000084000000	/* OR with this */
+#else
+#define SR_ENABLE_MMU	0x0000000080000000	/* OR with this */
+#endif
+
+#define SR_UNBLOCK_EXC	0xffffffffefffffff	/* AND with this */
+#define SR_BLOCK_EXC	0x0000000010000000	/* OR with this */
+
+#else	/* Not __ASSEMBLY__ syntax */
+
+/*
+** Stringify reg. name
+*/
+#define __str(x)  #x
+
+/* Stringify control register names for use in inline assembly */
+#define __SR __str(SR)
+#define __SSR __str(SSR)
+#define __PSSR __str(PSSR)
+#define __INTEVT __str(INTEVT)
+#define __EXPEVT __str(EXPEVT)
+#define __PEXPEVT __str(PEXPEVT)
+#define __TRA __str(TRA)
+#define __SPC __str(SPC)
+#define __PSPC __str(PSPC)
+#define __RESVEC __str(RESVEC)
+#define __VBR __str(VBR)
+#define __TEA __str(TEA)
+#define __DCR __str(DCR)
+#define __KCR0 __str(KCR0)
+#define __KCR1 __str(KCR1)
+#define __CTC __str(CTC)
+#define __USR __str(USR)
+
+#endif /* __ASSEMBLY__ */
+#endif /* __ASM_SH_CPU_SH5_REGISTERS_H */
diff --git a/arch/sh/include/cpu-sh5/cpu/rtc.h b/arch/sh/include/cpu-sh5/cpu/rtc.h
new file mode 100644
index 000000000000..12ea0ed144e1
--- /dev/null
+++ b/arch/sh/include/cpu-sh5/cpu/rtc.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_SH_CPU_SH5_RTC_H
+#define __ASM_SH_CPU_SH5_RTC_H
+
+#define rtc_reg_size		sizeof(u32)
+#define RTC_BIT_INVERTED	0	/* The SH-5 RTC is surprisingly sane! */
+#define RTC_DEF_CAPABILITIES	RTC_CAP_4_DIGIT_YEAR
+
+#endif /* __ASM_SH_CPU_SH5_RTC_H */
diff --git a/arch/sh/include/mach-dreamcast/mach/dma.h b/arch/sh/include/mach-dreamcast/mach/dma.h
new file mode 100644
index 000000000000..ddd68e788705
--- /dev/null
+++ b/arch/sh/include/mach-dreamcast/mach/dma.h
@@ -0,0 +1,34 @@
+/*
+ * include/asm-sh/dreamcast/dma.h
+ *
+ * Copyright (C) 2003 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_DREAMCAST_DMA_H
+#define __ASM_SH_DREAMCAST_DMA_H
+
+/* Number of DMA channels */
+#define ONCHIP_NR_DMA_CHANNELS	4
+#define G2_NR_DMA_CHANNELS	4
+#define PVR2_NR_DMA_CHANNELS	1
+
+/* Channels for cascading */
+#define PVR2_CASCADE_CHAN	2
+#define G2_CASCADE_CHAN		3
+
+/* PVR2 DMA Registers */
+#define PVR2_DMA_BASE		0xa05f6800
+#define PVR2_DMA_ADDR		(PVR2_DMA_BASE + 0)
+#define PVR2_DMA_COUNT		(PVR2_DMA_BASE + 4)
+#define PVR2_DMA_MODE		(PVR2_DMA_BASE + 8)
+#define PVR2_DMA_LMMODE0	(PVR2_DMA_BASE + 132)
+#define PVR2_DMA_LMMODE1	(PVR2_DMA_BASE + 136)
+
+/* G2 DMA Register */
+#define G2_DMA_BASE		0xa05f7800
+
+#endif /* __ASM_SH_DREAMCAST_DMA_H */
+
diff --git a/arch/sh/include/mach-dreamcast/mach/maple.h b/arch/sh/include/mach-dreamcast/mach/maple.h
new file mode 100644
index 000000000000..51f6a87f1f11
--- /dev/null
+++ b/arch/sh/include/mach-dreamcast/mach/maple.h
@@ -0,0 +1,37 @@
+#ifndef __ASM_MAPLE_H
+#define __ASM_MAPLE_H
+
+#define MAPLE_PORTS 4
+#define MAPLE_PNP_INTERVAL HZ
+#define MAPLE_MAXPACKETS 8
+#define MAPLE_DMA_ORDER 14
+#define MAPLE_DMA_SIZE (1 << MAPLE_DMA_ORDER)
+#define MAPLE_DMA_PAGES ((MAPLE_DMA_ORDER > PAGE_SHIFT) ? \
+			  MAPLE_DMA_ORDER - PAGE_SHIFT : 0)
+
+/* Maple Bus registers */
+#define MAPLE_BASE     0xa05f6c00
+#define MAPLE_DMAADDR  (MAPLE_BASE+0x04)
+#define MAPLE_TRIGTYPE (MAPLE_BASE+0x10)
+#define MAPLE_ENABLE   (MAPLE_BASE+0x14)
+#define MAPLE_STATE    (MAPLE_BASE+0x18)
+#define MAPLE_SPEED    (MAPLE_BASE+0x80)
+#define MAPLE_RESET    (MAPLE_BASE+0x8c)
+
+#define MAPLE_MAGIC    0x6155404f
+#define MAPLE_2MBPS    0
+#define MAPLE_TIMEOUT(n) ((n)<<15)
+
+/* Function codes */
+#define MAPLE_FUNC_CONTROLLER 0x001
+#define MAPLE_FUNC_MEMCARD    0x002
+#define MAPLE_FUNC_LCD        0x004
+#define MAPLE_FUNC_CLOCK      0x008
+#define MAPLE_FUNC_MICROPHONE 0x010
+#define MAPLE_FUNC_ARGUN      0x020
+#define MAPLE_FUNC_KEYBOARD   0x040
+#define MAPLE_FUNC_LIGHTGUN   0x080
+#define MAPLE_FUNC_PURUPURU   0x100
+#define MAPLE_FUNC_MOUSE      0x200
+
+#endif /* __ASM_MAPLE_H */
diff --git a/arch/sh/include/mach-dreamcast/mach/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h
new file mode 100644
index 000000000000..75fc9009e092
--- /dev/null
+++ b/arch/sh/include/mach-dreamcast/mach/pci.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-sh/dreamcast/pci.h
+ *
+ * Copyright (C) 2001, 2002  M. R. Brown
+ * Copyright (C) 2002, 2003  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef __ASM_SH_DREAMCAST_PCI_H
+#define __ASM_SH_DREAMCAST_PCI_H
+
+#include <mach-dreamcast/mach/sysasic.h>
+
+#define	GAPSPCI_REGS		0x01001400
+#define GAPSPCI_DMA_BASE	0x01840000
+#define GAPSPCI_DMA_SIZE	32768
+#define GAPSPCI_BBA_CONFIG	0x01001600
+#define GAPSPCI_BBA_CONFIG_SIZE	0x2000
+
+#define	GAPSPCI_IRQ		HW_EVENT_EXTERNAL
+
+#endif /* __ASM_SH_DREAMCAST_PCI_H */
+
diff --git a/arch/sh/include/mach-dreamcast/mach/sysasic.h b/arch/sh/include/mach-dreamcast/mach/sysasic.h
new file mode 100644
index 000000000000..f33426608a87
--- /dev/null
+++ b/arch/sh/include/mach-dreamcast/mach/sysasic.h
@@ -0,0 +1,43 @@
+/* include/asm-sh/dreamcast/sysasic.h
+ *
+ * Definitions for the Dreamcast System ASIC and related peripherals.
+ *
+ * Copyright (c) 2001 M. R. Brown <mrbrown@linuxdc.org>
+ * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org>
+ *
+ * This file is part of the LinuxDC project (www.linuxdc.org)
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ *
+ */
+#ifndef __ASM_SH_DREAMCAST_SYSASIC_H
+#define __ASM_SH_DREAMCAST_SYSASIC_H
+
+#include <asm/irq.h>
+
+/* Hardware events -
+
+   Each of these events correspond to a bit within the Event Mask Registers/
+   Event Status Registers.  Because of the virtual IRQ numbering scheme, a
+   base offset must be used when calculating the virtual IRQ that each event
+   takes.
+*/
+
+#define HW_EVENT_IRQ_BASE  48
+
+/* IRQ 13 */
+#define HW_EVENT_VSYNC     (HW_EVENT_IRQ_BASE +  5) /* VSync */
+#define HW_EVENT_MAPLE_DMA (HW_EVENT_IRQ_BASE + 12) /* Maple DMA complete */
+#define HW_EVENT_GDROM_DMA (HW_EVENT_IRQ_BASE + 14) /* GD-ROM DMA complete */
+#define HW_EVENT_G2_DMA    (HW_EVENT_IRQ_BASE + 15) /* G2 DMA complete */
+#define HW_EVENT_PVR2_DMA  (HW_EVENT_IRQ_BASE + 19) /* PVR2 DMA complete */
+
+/* IRQ 11 */
+#define HW_EVENT_GDROM_CMD (HW_EVENT_IRQ_BASE + 32) /* GD-ROM cmd. complete */
+#define HW_EVENT_AICA_SYS  (HW_EVENT_IRQ_BASE + 33) /* AICA-related */
+#define HW_EVENT_EXTERNAL  (HW_EVENT_IRQ_BASE + 35) /* Ext. (expansion) */
+
+#define HW_EVENT_IRQ_MAX (HW_EVENT_IRQ_BASE + 95)
+
+#endif /* __ASM_SH_DREAMCAST_SYSASIC_H */
+
diff --git a/arch/sh/include/mach-landisk/mach/gio.h b/arch/sh/include/mach-landisk/mach/gio.h
new file mode 100644
index 000000000000..35d7368b718a
--- /dev/null
+++ b/arch/sh/include/mach-landisk/mach/gio.h
@@ -0,0 +1,37 @@
+#ifndef __ASM_SH_LANDISK_GIO_H
+#define __ASM_SH_LANDISK_GIO_H
+
+#include <linux/ioctl.h>
+
+/* version */
+#define VERSION_STR	"1.00"
+
+/* Driver name */
+#define GIO_DRIVER_NAME		"/dev/giodrv"
+
+/* Use 'k' as magic number */
+#define GIODRV_IOC_MAGIC  'k'
+
+#define GIODRV_IOCRESET    _IO(GIODRV_IOC_MAGIC, 0)
+/*
+ * S means "Set" through a ptr,
+ * T means "Tell" directly
+ * G means "Get" (to a pointed var)
+ * Q means "Query", response is on the return value
+ * X means "eXchange": G and S atomically
+ * H means "sHift": T and Q atomically
+ */
+#define GIODRV_IOCSGIODATA1   _IOW(GIODRV_IOC_MAGIC,  1, unsigned char *)
+#define GIODRV_IOCGGIODATA1   _IOR(GIODRV_IOC_MAGIC,  2, unsigned char *)
+#define GIODRV_IOCSGIODATA2   _IOW(GIODRV_IOC_MAGIC,  3, unsigned short *)
+#define GIODRV_IOCGGIODATA2   _IOR(GIODRV_IOC_MAGIC,  4, unsigned short *)
+#define GIODRV_IOCSGIODATA4   _IOW(GIODRV_IOC_MAGIC,  5, unsigned long *)
+#define GIODRV_IOCGGIODATA4   _IOR(GIODRV_IOC_MAGIC,  6, unsigned long *)
+#define GIODRV_IOCSGIOSETADDR _IOW(GIODRV_IOC_MAGIC,  7, unsigned long *)
+#define GIODRV_IOCHARDRESET   _IO(GIODRV_IOC_MAGIC, 8) /* debugging tool */
+#define GIODRV_IOC_MAXNR 8
+
+#define GIO_READ 0x00000000
+#define GIO_WRITE 0x00000001
+
+#endif /* __ASM_SH_LANDISK_GIO_H  */
diff --git a/arch/sh/include/mach-landisk/mach/iodata_landisk.h b/arch/sh/include/mach-landisk/mach/iodata_landisk.h
new file mode 100644
index 000000000000..6fb04ab38b9f
--- /dev/null
+++ b/arch/sh/include/mach-landisk/mach/iodata_landisk.h
@@ -0,0 +1,42 @@
+#ifndef __ASM_SH_IODATA_LANDISK_H
+#define __ASM_SH_IODATA_LANDISK_H
+
+/*
+ * linux/include/asm-sh/landisk/iodata_landisk.h
+ *
+ * Copyright (C) 2000  Atom Create Engineering Co., Ltd.
+ *
+ * IO-DATA LANDISK support
+ */
+
+/* Box specific addresses.  */
+
+#define PA_USB		0xa4000000	/* USB Controller M66590 */
+
+#define PA_ATARST	0xb0000000	/* ATA/FATA Access Control Register */
+#define PA_LED		0xb0000001	/* LED Control Register */
+#define PA_STATUS	0xb0000002	/* Switch Status Register */
+#define PA_SHUTDOWN	0xb0000003	/* Shutdown Control Register */
+#define PA_PCIPME	0xb0000004	/* PCI PME Status Register */
+#define PA_IMASK	0xb0000005	/* Interrupt Mask Register */
+/* 2003.10.31 I-O DATA NSD NWG	add.	for shutdown port clear */
+#define PA_PWRINT_CLR	0xb0000006	/* Shutdown Interrupt clear Register */
+
+#define PA_PIDE_OFFSET	0x40		/* CF IDE Offset */
+#define PA_SIDE_OFFSET	0x40		/* HDD IDE Offset */
+
+#define IRQ_PCIINTA	5		/* PCI INTA IRQ */
+#define IRQ_PCIINTB	6		/* PCI INTB IRQ */
+#define IRQ_PCIINDC	7		/* PCI INTC IRQ */
+#define IRQ_PCIINTD	8		/* PCI INTD IRQ */
+#define IRQ_ATA		9		/* ATA IRQ */
+#define IRQ_FATA	10		/* FATA IRQ */
+#define IRQ_POWER	11		/* Power Switch IRQ */
+#define IRQ_BUTTON	12		/* USL-5P Button IRQ */
+#define IRQ_FAULT	13		/* USL-5P Fault  IRQ */
+
+#define __IO_PREFIX landisk
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_IODATA_LANDISK_H */
+
diff --git a/arch/sh/include/mach-se/mach/se.h b/arch/sh/include/mach-se/mach/se.h
new file mode 100644
index 000000000000..eb23000e1bbe
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se.h
@@ -0,0 +1,99 @@
+#ifndef __ASM_SH_HITACHI_SE_H
+#define __ASM_SH_HITACHI_SE_H
+
+/*
+ * linux/include/asm-sh/hitachi_se.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine support
+ */
+
+/* Box specific addresses.  */
+
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0x01000000	/* EPROM */
+#define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0x12000000
+#define PA_EXT4_SIZE	0x02000000
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+#define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
+
+#define PA_83902	0xb0000000	/* DP83902A */
+#define PA_83902_IF	0xb0040000	/* DP83902A remote io port */
+#define PA_83902_RST	0xb0080000	/* DP83902A reset port */
+
+#define PA_SUPERIO	0xb0400000	/* SMC37C935A super io chip */
+#define PA_DIPSW0	0xb0800000	/* Dip switch 5,6 */
+#define PA_DIPSW1	0xb0800002	/* Dip switch 7,8 */
+#define PA_LED		0xb0c00000	/* LED */
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define PA_BCR		0xb0e00000
+#else
+#define PA_BCR		0xb1400000	/* FPGA */
+#endif
+
+#define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define BCR_ILCRA	(PA_BCR + 0)
+#define BCR_ILCRB	(PA_BCR + 2)
+#define BCR_ILCRC	(PA_BCR + 4)
+#define BCR_ILCRD	(PA_BCR + 6)
+#define BCR_ILCRE	(PA_BCR + 8)
+#define BCR_ILCRF	(PA_BCR + 10)
+#define BCR_ILCRG	(PA_BCR + 12)
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7705)
+#define IRQ_STNIC	12
+#define IRQ_CFCARD	14
+#else
+#define IRQ_STNIC	10
+#define IRQ_CFCARD	7
+#endif
+
+/* SH Ether support (SH7710/SH7712) */
+/* Base address */
+#define SH_ETH0_BASE 0xA7000000
+#define SH_ETH1_BASE 0xA7000400
+/* PHY ID */
+#if defined(CONFIG_CPU_SUBTYPE_SH7710)
+# define PHY_ID 0x00
+#elif defined(CONFIG_CPU_SUBTYPE_SH7712)
+# define PHY_ID 0x01
+#endif
+/* Ether IRQ */
+#define SH_ETH0_IRQ	80
+#define SH_ETH1_IRQ	81
+#define SH_TSU_IRQ	82
+
+void init_se_IRQ(void);
+
+#define __IO_PREFIX	se
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_HITACHI_SE_H */
diff --git a/arch/sh/include/mach-se/mach/se7206.h b/arch/sh/include/mach-se/mach/se7206.h
new file mode 100644
index 000000000000..698eb80389ab
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se7206.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_SH_SE7206_H
+#define __ASM_SH_SE7206_H
+
+#define PA_SMSC		0x30000000
+#define PA_MRSHPC	0x34000000
+#define PA_LED		0x31400000
+
+void init_se7206_IRQ(void);
+
+#define __IO_PREFIX	se7206
+#include <asm/io_generic.h>
+
+#endif /* __ASM_SH_SE7206_H */
diff --git a/arch/sh/include/mach-se/mach/se7343.h b/arch/sh/include/mach-se/mach/se7343.h
new file mode 100644
index 000000000000..98458460e632
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se7343.h
@@ -0,0 +1,149 @@
+#ifndef __ASM_SH_HITACHI_SE7343_H
+#define __ASM_SH_HITACHI_SE7343_H
+
+/*
+ * include/asm-sh/se/se7343.h
+ *
+ * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
+ *
+ * SH-Mobile SolutionEngine 7343 support
+ */
+
+/* Box specific addresses.  */
+
+/* Area 0 */
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte(Actually 2MB) */
+#define PA_FROM		0x00400000	/* Flash ROM */
+#define PA_FROM_SIZE	0x00400000	/* Flash size 4M byte */
+#define PA_SRAM		0x00800000	/* SRAM */
+#define PA_FROM_SIZE	0x00400000	/* SRAM size 4M byte */
+/* Area 1 */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+/* Area 2 */
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+/* Area 3 */
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+/* Area 4 */
+#define PA_PCIC		0x10000000	/* MR-SHPC-01 PCMCIA */
+#define PA_MRSHPC       0xb03fffe0      /* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1   0xb0400000      /* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2   0xb0500000      /* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO    0xb0600000      /* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+#define PA_LED		0xb0C00000	/* LED */
+#define LED_SHIFT       0
+#define PA_DIPSW	0xb0900000	/* Dip switch 31 */
+#define PA_CPLD_MODESET	0xb1400004	/* CPLD Mode set register */
+#define PA_CPLD_ST	0xb1400008	/* CPLD Interrupt status register */
+#define PA_CPLD_IMSK	0xb140000a	/* CPLD Interrupt mask register */
+/* Area 5 */
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+/* Area 6 */
+#define PA_LCD1		0xb8000000
+#define PA_LCD2		0xb8800000
+
+#define PORT_PACR	0xA4050100
+#define PORT_PBCR	0xA4050102
+#define PORT_PCCR	0xA4050104
+#define PORT_PDCR	0xA4050106
+#define PORT_PECR	0xA4050108
+#define PORT_PFCR	0xA405010A
+#define PORT_PGCR	0xA405010C
+#define PORT_PHCR	0xA405010E
+#define PORT_PJCR	0xA4050110
+#define PORT_PKCR	0xA4050112
+#define PORT_PLCR	0xA4050114
+#define PORT_PMCR	0xA4050116
+#define PORT_PNCR	0xA4050118
+#define PORT_PQCR	0xA405011A
+#define PORT_PRCR	0xA405011C
+#define PORT_PSCR	0xA405011E
+#define PORT_PTCR	0xA4050140
+#define PORT_PUCR	0xA4050142
+#define PORT_PVCR	0xA4050144
+#define PORT_PWCR	0xA4050146
+#define PORT_PYCR	0xA4050148
+#define PORT_PZCR	0xA405014A
+
+#define PORT_PSELA	0xA405014C
+#define PORT_PSELB	0xA405014E
+#define PORT_PSELC	0xA4050150
+#define PORT_PSELD	0xA4050152
+#define PORT_PSELE	0xA4050154
+
+#define PORT_HIZCRA	0xA4050156
+#define PORT_HIZCRB	0xA4050158
+#define PORT_HIZCRC	0xA405015C
+
+#define PORT_DRVCR	0xA4050180
+
+#define PORT_PADR  	0xA4050120
+#define PORT_PBDR  	0xA4050122
+#define PORT_PCDR  	0xA4050124
+#define PORT_PDDR  	0xA4050126
+#define PORT_PEDR  	0xA4050128
+#define PORT_PFDR  	0xA405012A
+#define PORT_PGDR  	0xA405012C
+#define PORT_PHDR  	0xA405012E
+#define PORT_PJDR  	0xA4050130
+#define PORT_PKDR  	0xA4050132
+#define PORT_PLDR  	0xA4050134
+#define PORT_PMDR  	0xA4050136
+#define PORT_PNDR  	0xA4050138
+#define PORT_PQDR  	0xA405013A
+#define PORT_PRDR  	0xA405013C
+#define PORT_PTDR  	0xA4050160
+#define PORT_PUDR  	0xA4050162
+#define PORT_PVDR  	0xA4050164
+#define PORT_PWDR  	0xA4050166
+#define PORT_PYDR  	0xA4050168
+
+#define FPGA_IN		0xb1400000
+#define FPGA_OUT	0xb1400002
+
+#define __IO_PREFIX	sh7343se
+#include <asm/io_generic.h>
+
+#define IRQ0_IRQ        32
+#define IRQ1_IRQ        33
+#define IRQ4_IRQ        36
+#define IRQ5_IRQ        37
+
+#define SE7343_FPGA_IRQ_MRSHPC0	0
+#define SE7343_FPGA_IRQ_MRSHPC1	1
+#define SE7343_FPGA_IRQ_MRSHPC2	2
+#define SE7343_FPGA_IRQ_MRSHPC3	3
+#define SE7343_FPGA_IRQ_SMC	6	/* EXT_IRQ2 */
+#define SE7343_FPGA_IRQ_USB	8
+
+#define SE7343_FPGA_IRQ_NR	11
+#define SE7343_FPGA_IRQ_BASE	120
+
+#define MRSHPC_IRQ3    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3)
+#define MRSHPC_IRQ2    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2)
+#define MRSHPC_IRQ1    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1)
+#define MRSHPC_IRQ0    	(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0)
+#define SMC_IRQ		(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC)
+#define USB_IRQ		(SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB)
+
+/* arch/sh/boards/se/7343/irq.c */
+void init_7343se_IRQ(void);
+
+#endif  /* __ASM_SH_HITACHI_SE7343_H */
diff --git a/arch/sh/include/mach-se/mach/se7721.h b/arch/sh/include/mach-se/mach/se7721.h
new file mode 100644
index 000000000000..b957f6041193
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se7721.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ *
+ * Hitachi UL SolutionEngine 7721 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+
+#ifndef __ASM_SH_SE7721_H
+#define __ASM_SH_SE7721_H
+#include <asm/addrspace.h>
+
+/* Box specific addresses. */
+#define SE_AREA0_WIDTH	2		/* Area0: 32bit */
+#define PA_ROM		0xa0000000	/* EPROM */
+#define PA_ROM_SIZE	0x00200000	/* EPROM size 2M byte */
+#define PA_FROM		0xa1000000	/* Flash-ROM */
+#define PA_FROM_SIZE	0x01000000	/* Flash-ROM size 16M byte */
+#define PA_EXT1		0xa4000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_SDRAM	0xaC000000	/* SDRAM(Area3) 64MB */
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0xb0000000
+#define PA_EXT4_SIZE	0x04000000
+
+#define PA_PERIPHERAL	0xB8000000
+
+#define PA_PCIC		PA_PERIPHERAL
+#define PA_MRSHPC	(PA_PERIPHERAL + 0x003fffe0)
+#define PA_MRSHPC_MW1	(PA_PERIPHERAL + 0x00400000)
+#define PA_MRSHPC_MW2	(PA_PERIPHERAL + 0x00500000)
+#define PA_MRSHPC_IO	(PA_PERIPHERAL + 0x00600000)
+#define MRSHPC_OPTION	(PA_MRSHPC + 6)
+#define MRSHPC_CSR	(PA_MRSHPC + 8)
+#define MRSHPC_ISR	(PA_MRSHPC + 10)
+#define MRSHPC_ICR	(PA_MRSHPC + 12)
+#define MRSHPC_CPWCR	(PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1	(PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1	(PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1	(PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2	(PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2	(PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2	(PA_MRSHPC + 26)
+#define MRSHPC_CDCR	(PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO	(PA_MRSHPC + 30)
+
+#define PA_LED		0xB6800000	/* 8bit LED */
+#define PA_FPGA		0xB7000000 	/* FPGA base address */
+
+#define MRSHPC_IRQ0	10
+
+#define FPGA_ILSR1	(PA_FPGA + 0x02)
+#define FPGA_ILSR2	(PA_FPGA + 0x03)
+#define FPGA_ILSR3	(PA_FPGA + 0x04)
+#define FPGA_ILSR4	(PA_FPGA + 0x05)
+#define FPGA_ILSR5	(PA_FPGA + 0x06)
+#define FPGA_ILSR6	(PA_FPGA + 0x07)
+#define FPGA_ILSR7	(PA_FPGA + 0x08)
+#define FPGA_ILSR8	(PA_FPGA + 0x09)
+
+void init_se7721_IRQ(void);
+
+#define __IO_PREFIX		se7721
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SE7721_H */
diff --git a/arch/sh/include/mach-se/mach/se7722.h b/arch/sh/include/mach-se/mach/se7722.h
new file mode 100644
index 000000000000..e971d9a82f4a
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se7722.h
@@ -0,0 +1,112 @@
+#ifndef __ASM_SH_SE7722_H
+#define __ASM_SH_SE7722_H
+
+/*
+ * linux/include/asm-sh/se7722.h
+ *
+ * Copyright (C) 2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7722 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ */
+#include <asm/addrspace.h>
+
+/* Box specific addresses.  */
+#define SE_AREA0_WIDTH	4		/* Area0: 32bit */
+#define PA_ROM		0xa0000000	/* EPROM */
+#define PA_ROM_SIZE	0x00200000	/* EPROM size 2M byte */
+#define PA_FROM		0xa1000000	/* Flash-ROM */
+#define PA_FROM_SIZE	0x01000000	/* Flash-ROM size 16M byte */
+#define PA_EXT1		0xa4000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_SDRAM	0xaC000000	/* DDR-SDRAM(Area3) 64MB */
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0xb0000000
+#define PA_EXT4_SIZE	0x04000000
+
+#define PA_PERIPHERAL	0xB0000000
+
+#define PA_PCIC         PA_PERIPHERAL   		/* MR-SHPC-01 PCMCIA */
+#define PA_MRSHPC       (PA_PERIPHERAL + 0x003fffe0)    /* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1   (PA_PERIPHERAL + 0x00400000)    /* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2   (PA_PERIPHERAL + 0x00500000)    /* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO    (PA_PERIPHERAL + 0x00600000)    /* MR-SHPC-01 I/O window base */
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define PA_LED		(PA_PERIPHERAL + 0x00800000)	/* 8bit LED */
+#define PA_FPGA		(PA_PERIPHERAL + 0x01800000) 	/* FPGA base address */
+
+#define PA_LAN		(PA_AREA6_IO + 0)		/* SMC LAN91C111 */
+/* GPIO */
+#define FPGA_IN         0xb1840000UL
+#define FPGA_OUT        0xb1840004UL
+
+#define PORT_PECR       0xA4050108UL
+#define PORT_PJCR       0xA4050110UL
+#define PORT_PSELD      0xA4050154UL
+#define PORT_PSELB      0xA4050150UL
+
+#define PORT_PSELC      0xA4050152UL
+#define PORT_PKCR       0xA4050112UL
+#define PORT_PHCR       0xA405010EUL
+#define PORT_PLCR       0xA4050114UL
+#define PORT_PMCR       0xA4050116UL
+#define PORT_PRCR       0xA405011CUL
+#define PORT_PXCR       0xA4050148UL
+#define PORT_PSELA      0xA405014EUL
+#define PORT_PYCR       0xA405014AUL
+#define PORT_PZCR       0xA405014CUL
+#define PORT_HIZCRA     0xA4050158UL
+#define PORT_HIZCRC     0xA405015CUL
+
+/* IRQ */
+#define IRQ0_IRQ        32
+#define IRQ1_IRQ        33
+
+#define IRQ01_MODE      0xb1800000
+#define IRQ01_STS       0xb1800004
+#define IRQ01_MASK      0xb1800008
+
+/* Bits in IRQ01_* registers */
+
+#define SE7722_FPGA_IRQ_USB	0 /* IRQ0 */
+#define SE7722_FPGA_IRQ_SMC	1 /* IRQ0 */
+#define SE7722_FPGA_IRQ_MRSHPC0	2 /* IRQ1 */
+#define SE7722_FPGA_IRQ_MRSHPC1	3 /* IRQ1 */
+#define SE7722_FPGA_IRQ_MRSHPC2	4 /* IRQ1 */
+#define SE7722_FPGA_IRQ_MRSHPC3	5 /* IRQ1 */
+
+#define SE7722_FPGA_IRQ_NR	6
+#define SE7722_FPGA_IRQ_BASE	110
+
+#define MRSHPC_IRQ3    	(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC3)
+#define MRSHPC_IRQ2    	(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC2)
+#define MRSHPC_IRQ1    	(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC1)
+#define MRSHPC_IRQ0    	(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC0)
+#define SMC_IRQ		(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_SMC)
+#define USB_IRQ		(SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_USB)
+
+/* arch/sh/boards/se/7722/irq.c */
+void init_se7722_IRQ(void);
+
+#define __IO_PREFIX		se7722
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SE7722_H */
diff --git a/arch/sh/include/mach-se/mach/se7751.h b/arch/sh/include/mach-se/mach/se7751.h
new file mode 100644
index 000000000000..b36792ac5d66
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se7751.h
@@ -0,0 +1,73 @@
+#ifndef __ASM_SH_HITACHI_7751SE_H
+#define __ASM_SH_HITACHI_7751SE_H
+
+/*
+ * linux/include/asm-sh/hitachi_7751se.h
+ *
+ * Copyright (C) 2000  Kazumoto Kojima
+ *
+ * Hitachi SolutionEngine support
+
+ * Modified for 7751 Solution Engine by
+ * Ian da Silva and Jeremy Siegel, 2001.
+ */
+
+/* Box specific addresses.  */
+
+#define PA_ROM		0x00000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0x01000000	/* EPROM */
+#define PA_FROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_EXT1		0x04000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_EXT2		0x08000000
+#define PA_EXT2_SIZE	0x04000000
+#define PA_SDRAM	0x0c000000
+#define PA_SDRAM_SIZE	0x04000000
+
+#define PA_EXT4		0x12000000
+#define PA_EXT4_SIZE	0x02000000
+#define PA_EXT5		0x14000000
+#define PA_EXT5_SIZE	0x04000000
+#define PA_PCIC		0x18000000	/* MR-SHPC-01 PCMCIA */
+
+#define PA_DIPSW0	0xb9000000	/* Dip switch 5,6 */
+#define PA_DIPSW1	0xb9000002	/* Dip switch 7,8 */
+#define PA_LED		0xba000000	/* LED */
+#define	PA_BCR		0xbb000000	/* FPGA on the MS7751SE01 */
+
+#define PA_MRSHPC	0xb83fffe0	/* MR-SHPC-01 PCMCIA controller */
+#define PA_MRSHPC_MW1	0xb8400000	/* MR-SHPC-01 memory window base */
+#define PA_MRSHPC_MW2	0xb8500000	/* MR-SHPC-01 attribute window base */
+#define PA_MRSHPC_IO	0xb8600000	/* MR-SHPC-01 I/O window base */
+#define MRSHPC_MODE     (PA_MRSHPC + 4)
+#define MRSHPC_OPTION   (PA_MRSHPC + 6)
+#define MRSHPC_CSR      (PA_MRSHPC + 8)
+#define MRSHPC_ISR      (PA_MRSHPC + 10)
+#define MRSHPC_ICR      (PA_MRSHPC + 12)
+#define MRSHPC_CPWCR    (PA_MRSHPC + 14)
+#define MRSHPC_MW0CR1   (PA_MRSHPC + 16)
+#define MRSHPC_MW1CR1   (PA_MRSHPC + 18)
+#define MRSHPC_IOWCR1   (PA_MRSHPC + 20)
+#define MRSHPC_MW0CR2   (PA_MRSHPC + 22)
+#define MRSHPC_MW1CR2   (PA_MRSHPC + 24)
+#define MRSHPC_IOWCR2   (PA_MRSHPC + 26)
+#define MRSHPC_CDCR     (PA_MRSHPC + 28)
+#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30)
+
+#define BCR_ILCRA	(PA_BCR + 0)
+#define BCR_ILCRB	(PA_BCR + 2)
+#define BCR_ILCRC	(PA_BCR + 4)
+#define BCR_ILCRD	(PA_BCR + 6)
+#define BCR_ILCRE	(PA_BCR + 8)
+#define BCR_ILCRF	(PA_BCR + 10)
+#define BCR_ILCRG	(PA_BCR + 12)
+
+#define IRQ_79C973	13
+
+void init_7751se_IRQ(void);
+
+#define __IO_PREFIX	sh7751se
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_HITACHI_7751SE_H */
diff --git a/arch/sh/include/mach-se/mach/se7780.h b/arch/sh/include/mach-se/mach/se7780.h
new file mode 100644
index 000000000000..40e9b41458cd
--- /dev/null
+++ b/arch/sh/include/mach-se/mach/se7780.h
@@ -0,0 +1,108 @@
+#ifndef __ASM_SH_SE7780_H
+#define __ASM_SH_SE7780_H
+
+/*
+ * linux/include/asm-sh/se7780.h
+ *
+ * Copyright (C) 2006,2007  Nobuhiro Iwamatsu
+ *
+ * Hitachi UL SolutionEngine 7780 Support.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <asm/addrspace.h>
+
+/* Box specific addresses.  */
+#define SE_AREA0_WIDTH	4		/* Area0: 32bit */
+#define PA_ROM		0xa0000000	/* EPROM */
+#define PA_ROM_SIZE	0x00400000	/* EPROM size 4M byte */
+#define PA_FROM		0xa1000000	/* Flash-ROM */
+#define PA_FROM_SIZE	0x01000000	/* Flash-ROM size 16M byte */
+#define PA_EXT1		0xa4000000
+#define PA_EXT1_SIZE	0x04000000
+#define PA_SM501	PA_EXT1		/* Graphic IC (SM501) */
+#define PA_SM501_SIZE	PA_EXT1_SIZE	/* Graphic IC (SM501) */
+#define PA_SDRAM	0xa8000000	/* DDR-SDRAM(Area2/3) 128MB */
+#define PA_SDRAM_SIZE	0x08000000
+
+#define PA_EXT4		0xb0000000
+#define PA_EXT4_SIZE	0x04000000
+#define PA_EXT_FLASH	PA_EXT4		/* Expansion Flash-ROM */
+
+#define PA_PERIPHERAL	PA_AREA6_IO	/* SW6-6=ON */
+
+#define PA_LAN		(PA_PERIPHERAL + 0)		/* SMC LAN91C111 */
+#define PA_LED_DISP	(PA_PERIPHERAL + 0x02000000)	/* 8words LED Display */
+#define DISP_CHAR_RAM	(7 << 3)
+#define DISP_SEL0_ADDR	(DISP_CHAR_RAM + 0)
+#define DISP_SEL1_ADDR	(DISP_CHAR_RAM + 1)
+#define DISP_SEL2_ADDR	(DISP_CHAR_RAM + 2)
+#define DISP_SEL3_ADDR	(DISP_CHAR_RAM + 3)
+#define DISP_SEL4_ADDR	(DISP_CHAR_RAM + 4)
+#define DISP_SEL5_ADDR	(DISP_CHAR_RAM + 5)
+#define DISP_SEL6_ADDR	(DISP_CHAR_RAM + 6)
+#define DISP_SEL7_ADDR	(DISP_CHAR_RAM + 7)
+
+#define DISP_UDC_RAM	(5 << 3)
+#define PA_FPGA		(PA_PERIPHERAL + 0x03000000) /* FPGA base address */
+
+/* FPGA register address and bit */
+#define FPGA_SFTRST		(PA_FPGA + 0)	/* Soft reset register */
+#define FPGA_INTMSK1		(PA_FPGA + 2)	/* Interrupt Mask register 1 */
+#define FPGA_INTMSK2		(PA_FPGA + 4)	/* Interrupt Mask register 2 */
+#define FPGA_INTSEL1		(PA_FPGA + 6)	/* Interrupt select register 1 */
+#define FPGA_INTSEL2		(PA_FPGA + 8)	/* Interrupt select register 2 */
+#define FPGA_INTSEL3		(PA_FPGA + 10)	/* Interrupt select register 3 */
+#define FPGA_PCI_INTSEL1	(PA_FPGA + 12)	/* PCI Interrupt select register 1 */
+#define FPGA_PCI_INTSEL2	(PA_FPGA + 14)	/* PCI Interrupt select register 2 */
+#define FPGA_INTSET		(PA_FPGA + 16)	/* IRQ/IRL select register */
+#define FPGA_INTSTS1		(PA_FPGA + 18)	/* Interrupt status register 1 */
+#define FPGA_INTSTS2		(PA_FPGA + 20)	/* Interrupt status register 2 */
+#define FPGA_REQSEL		(PA_FPGA + 22)	/* REQ/GNT select register */
+#define FPGA_DBG_LED		(PA_FPGA + 32)	/* Debug LED(D-LED[8:1] */
+#define PA_LED			FPGA_DBG_LED
+#define FPGA_IVDRID		(PA_FPGA + 36)	/* iVDR ID Register */
+#define FPGA_IVDRPW		(PA_FPGA + 38)	/* iVDR Power ON Register */
+#define FPGA_MMCID		(PA_FPGA + 40)	/* MMC ID Register */
+
+/* FPGA INTSEL position */
+/* INTSEL1 */
+#define IRQPOS_SMC91CX          (0 * 4)
+#define IRQPOS_SM501            (1 * 4)
+/* INTSEL2 */
+#define IRQPOS_EXTINT1          (0 * 4)
+#define IRQPOS_EXTINT2          (1 * 4)
+#define IRQPOS_EXTINT3          (2 * 4)
+#define IRQPOS_EXTINT4          (3 * 4)
+/* INTSEL3 */
+#define IRQPOS_PCCPW            (0 * 4)
+
+/* IDE interrupt */
+#define IRQ_IDE0                67 /* iVDR */
+
+/* SMC interrupt */
+#define SMC_IRQ                 8
+
+/* SM501 interrupt */
+#define SM501_IRQ               0
+
+/* interrupt pin */
+#define IRQPIN_EXTINT1          0 /* IRQ0 pin */
+#define IRQPIN_EXTINT2          1 /* IRQ1 pin */
+#define IRQPIN_EXTINT3          2 /* IRQ2 pin */
+#define IRQPIN_SMC91CX          3 /* IRQ3 pin */
+#define IRQPIN_EXTINT4          4 /* IRQ4 pin */
+#define IRQPIN_PCC0             5 /* IRQ5 pin */
+#define IRQPIN_PCC2             6 /* IRQ6 pin */
+#define IRQPIN_SM501            7 /* IRQ7 pin */
+#define IRQPIN_PCCPW            7 /* IRQ7 pin */
+
+/* arch/sh/boards/se/7780/irq.c */
+void init_se7780_IRQ(void);
+
+#define __IO_PREFIX		se7780
+#include <asm/io_generic.h>
+
+#endif  /* __ASM_SH_SE7780_H */
diff --git a/arch/sh/include/mach-sh03/mach/io.h b/arch/sh/include/mach-sh03/mach/io.h
new file mode 100644
index 000000000000..c39c785bba94
--- /dev/null
+++ b/arch/sh/include/mach-sh03/mach/io.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-sh/sh03/io.h
+ *
+ * Copyright 2004 Interface Co.,Ltd. Saito.K
+ *
+ * IO functions for an Interface CTP/PCI-SH03
+ */
+
+#ifndef _ASM_SH_IO_SH03_H
+#define _ASM_SH_IO_SH03_H
+
+#include <linux/time.h>
+
+#define IRL0_IRQ	2
+#define IRL0_PRIORITY	13
+#define IRL1_IRQ	5
+#define IRL1_PRIORITY	10
+#define IRL2_IRQ	8
+#define IRL2_PRIORITY	7
+#define IRL3_IRQ	11
+#define IRL3_PRIORITY	4
+
+void heartbeat_sh03(void);
+
+#endif /* _ASM_SH_IO_SH03_H */
diff --git a/arch/sh/include/mach-sh03/mach/sh03.h b/arch/sh/include/mach-sh03/mach/sh03.h
new file mode 100644
index 000000000000..19c40b80428d
--- /dev/null
+++ b/arch/sh/include/mach-sh03/mach/sh03.h
@@ -0,0 +1,18 @@
+#ifndef __ASM_SH_SH03_H
+#define __ASM_SH_SH03_H
+
+/*
+ * linux/include/asm-sh/sh03/sh03.h
+ *
+ * Copyright (C) 2004  Interface Co., Ltd. Saito.K
+ *
+ * Interface CTP/PCI-SH03 support
+ */
+
+#define PA_PCI_IO       (0xbe240000)    /* PCI I/O space */
+#define PA_PCI_MEM      (0xbd000000)    /* PCI MEM space */
+
+#define PCIPAR          (0xa4000cf8)    /* PCI Config address */
+#define PCIPDR          (0xa4000cfc)    /* PCI Config data    */
+
+#endif  /* __ASM_SH_SH03_H */
diff --git a/arch/sh/kernel/.gitignore b/arch/sh/kernel/.gitignore
new file mode 100644
index 000000000000..c5f676c3c224
--- /dev/null
+++ b/arch/sh/kernel/.gitignore
@@ -0,0 +1 @@
+vmlinux.lds
diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32
index 4bbdce36b92b..0e6905fe9fec 100644
--- a/arch/sh/kernel/Makefile_32
+++ b/arch/sh/kernel/Makefile_32
@@ -21,7 +21,7 @@ obj-$(CONFIG_KEXEC)		+= machine_kexec.o relocate_kernel.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump.o
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_STACKTRACE)	+= stacktrace.o
-obj-$(CONFIG_BINFMT_ELF)	+= dump_task.o
+obj-$(CONFIG_ELF_CORE)		+= dump_task.o
 obj-$(CONFIG_IO_TRAPPED)	+= io_trapped.o
 
 EXTRA_CFLAGS += -Werror
diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c
index 01ff4d05aab0..bea40339919b 100644
--- a/arch/sh/kernel/cf-enabler.c
+++ b/arch/sh/kernel/cf-enabler.c
@@ -80,11 +80,11 @@ static int __init cf_init_default(void)
 }
 
 #if defined(CONFIG_SH_SOLUTION_ENGINE)
-#include <asm/se.h>
+#include <mach-se/mach/se.h>
 #elif defined(CONFIG_SH_7722_SOLUTION_ENGINE)
-#include <asm/se7722.h>
+#include <mach-se/mach/se7722.h>
 #elif defined(CONFIG_SH_7721_SOLUTION_ENGINE)
-#include <asm/se7721.h>
+#include <mach-se/mach/se7721.h>
 #endif
 
 /*
@@ -157,7 +157,7 @@ static int __init cf_init_se(void)
 }
 #endif
 
-int __init cf_init(void)
+static int __init cf_init(void)
 {
 	if (mach_is_se() || mach_is_7722se() || mach_is_7721se())
 		return cf_init_se();
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index b5f1e23ed57c..f5eb56e6bc59 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -88,7 +88,7 @@ static void propagate_rate(struct clk *clk)
 	}
 }
 
-int __clk_enable(struct clk *clk)
+static int __clk_enable(struct clk *clk)
 {
 	/*
 	 * See if this is the first time we're enabling the clock, some
@@ -111,7 +111,6 @@ int __clk_enable(struct clk *clk)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(__clk_enable);
 
 int clk_enable(struct clk *clk)
 {
@@ -131,7 +130,7 @@ static void clk_kref_release(struct kref *kref)
 	/* Nothing to do */
 }
 
-void __clk_disable(struct clk *clk)
+static void __clk_disable(struct clk *clk)
 {
 	int count = kref_put(&clk->kref, clk_kref_release);
 
@@ -143,7 +142,6 @@ void __clk_disable(struct clk *clk)
 			clk->ops->disable(clk);
 	}
 }
-EXPORT_SYMBOL_GPL(__clk_disable);
 
 void clk_disable(struct clk *clk)
 {
@@ -310,15 +308,11 @@ static int show_clocks(char *buf, char **start, off_t off,
 	list_for_each_entry_reverse(clk, &clock_list, node) {
 		unsigned long rate = clk_get_rate(clk);
 
-		/*
-		 * Don't bother listing dummy clocks with no ancestry
-		 * that only support enable and disable ops.
-		 */
-		if (unlikely(!rate && !clk->parent))
-			continue;
-
-		p += sprintf(p, "%-12s\t: %ld.%02ldMHz\n", clk->name,
-			     rate / 1000000, (rate % 1000000) / 10000);
+		p += sprintf(p, "%-12s\t: %ld.%02ldMHz\t%s\n", clk->name,
+			     rate / 1000000, (rate % 1000000) / 10000,
+			     ((clk->flags & CLK_ALWAYS_ENABLED) ||
+			      (atomic_read(&clk->kref.refcount) != 1)) ?
+			     "enabled" : "disabled");
 	}
 
 	return p - buf;
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index 79baa47af977..726f0335da76 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -20,7 +20,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/bitops.h>
-#include <asm/cpu/irq.h>
+#include <cpu/irq.h>
 #include <asm/page.h>
 
 /*
diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c
index da5dae787888..8c70e201bde0 100644
--- a/arch/sh/kernel/cpu/irq/intc.c
+++ b/arch/sh/kernel/cpu/irq/intc.c
@@ -62,7 +62,7 @@ struct intc_desc_int {
 #endif
 
 static unsigned int intc_prio_level[NR_IRQS]; /* for now */
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static unsigned long ack_handle[NR_IRQS];
 #endif
 
@@ -231,7 +231,7 @@ static void intc_disable(unsigned int irq)
 	}
 }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static void intc_mask_ack(unsigned int irq)
 {
 	struct intc_desc_int *d = get_intc_desc(irq);
@@ -244,8 +244,23 @@ static void intc_mask_ack(unsigned int irq)
 
 	if (handle) {
 		addr = INTC_REG(d, _INTC_ADDR_D(handle), 0);
-		ctrl_inb(addr);
-		ctrl_outb(0x3f ^ set_field(0, 1, handle), addr);
+		switch (_INTC_FN(handle)) {
+		case REG_FN_MODIFY_BASE + 0:	/* 8bit */
+			ctrl_inb(addr);
+			ctrl_outb(0xff ^ set_field(0, 1, handle), addr);
+			break;
+		case REG_FN_MODIFY_BASE + 1:	/* 16bit */
+			ctrl_inw(addr);
+			ctrl_outw(0xffff ^ set_field(0, 1, handle), addr);
+			break;
+		case REG_FN_MODIFY_BASE + 3:	/* 32bit */
+			ctrl_inl(addr);
+			ctrl_outl(0xffffffff ^ set_field(0, 1, handle), addr);
+			break;
+		default:
+			BUG();
+			break;
+		}
 	}
 }
 #endif
@@ -466,7 +481,7 @@ static unsigned int __init intc_prio_data(struct intc_desc *desc,
 	return 0;
 }
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 static unsigned int __init intc_ack_data(struct intc_desc *desc,
 					  struct intc_desc_int *d,
 					  intc_enum enum_id)
@@ -601,7 +616,7 @@ static void __init intc_register_irq(struct intc_desc *desc,
 	/* irq should be disabled by default */
 	d->chip.mask(irq);
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 	if (desc->ack_regs)
 		ack_handle[irq] = intc_ack_data(desc, d, enum_id);
 #endif
@@ -635,7 +650,7 @@ void __init register_intc_controller(struct intc_desc *desc)
 	d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0;
 	d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0;
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 	d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0;
 #endif
 	d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg));
@@ -676,7 +691,7 @@ void __init register_intc_controller(struct intc_desc *desc)
 	d->chip.mask_ack = intc_disable;
 	d->chip.set_type = intc_set_sense;
 
-#ifdef CONFIG_CPU_SH3
+#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A)
 	if (desc->ack_regs) {
 		for (i = 0; i < desc->nr_ack_regs; i++)
 			k += save_reg(d, k, desc->ack_regs[i].set_reg, 0);
diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S
index 0fc89069d8c7..becc54c45692 100644
--- a/arch/sh/kernel/cpu/sh2/entry.S
+++ b/arch/sh/kernel/cpu/sh2/entry.S
@@ -3,7 +3,7 @@
  *
  * The SH-2 exception entry
  *
- * Copyright (C) 2005,2006 Yoshinori Sato
+ * Copyright (C) 2005-2008 Yoshinori Sato
  * Copyright (C) 2005  AXE,Inc.
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -14,7 +14,7 @@
 #include <linux/linkage.h>
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 #include <asm/unistd.h>
 #include <asm/errno.h>
 #include <asm/page.h>
@@ -36,43 +36,41 @@ OFF_TRA	=  (16*4+6*4)
 #include <asm/entry-macros.S>
 
 ENTRY(exception_handler)
-	! already saved r0/r1
+	! stack
+	! r0 <- point sp
+	! r1
+	! pc
+	! sr
+	! r0 = temporary
+	! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
 	mov.l	r2,@-sp
 	mov.l	r3,@-sp
-	mov	r0,r1
 	cli
 	mov.l	$cpu_mode,r2
 	mov.l	@r2,r0
 	mov.l	@(5*4,r15),r3	! previous SR
-	shll2	r3		! set "S" flag
-	rotl	r0		! T <- "S" flag
-	rotl	r0		! "S" flag is LSB
-	rotcr	r3		! T -> r3:b30
-	shlr	r3
-	shlr	r0
-	bt/s	1f
-	 mov.l	r3,@(5*4,r15)	! copy cpu mode to SR
+	or	r0,r3		! set MD
+	tst	r0,r0
+	bf/s	1f		! previous mode check
+	 mov.l	r3,@(5*4,r15)	! update SR
 	! switch to kernel mode
-	mov	#1,r0
-	rotr	r0
-	rotr	r0
+	mov.l	__md_bit,r0
 	mov.l	r0,@r2		! enter kernel mode
 	mov.l	$current_thread_info,r2
 	mov.l	@r2,r2
-	mov	#0x20,r0
+	mov	#(THREAD_SIZE >> 8),r0
 	shll8	r0
 	add	r2,r0
 	mov	r15,r2		! r2 = user stack top
 	mov	r0,r15		! switch kernel stack
-	add	#-4,r15		! dummy
 	mov.l	r1,@-r15	! TRA
 	sts.l	macl, @-r15
 	sts.l	mach, @-r15
 	stc.l	gbr, @-r15
-	mov.l	@(4*4,r2),r0
-	mov.l	@(5*4,r2),r1
-	mov.l	r1,@-r15	! original SR
+	mov.l	@(5*4,r2),r0
+	mov.l	r0,@-r15	! original SR
 	sts.l	pr,@-r15
+	mov.l	@(4*4,r2),r0
 	mov.l	r0,@-r15	! original PC
 	mov	r2,r3
 	add	#(4+2)*4,r3	! rewind r0 - r3 + exception frame
@@ -88,14 +86,15 @@ ENTRY(exception_handler)
 	mov.l	r6,@-r15
 	mov.l	r5,@-r15
 	mov.l	r4,@-r15
+	mov	r1,r9		! save TRA
 	mov	r2,r8		! copy user -> kernel stack
-	mov.l	@r8+,r3
+	mov.l	@(0,r8),r3
 	mov.l	r3,@-r15
-	mov.l	@r8+,r2
+	mov.l	@(4,r8),r2
 	mov.l	r2,@-r15
-	mov.l	@r8+,r1
+	mov.l	@(12,r8),r1
 	mov.l	r1,@-r15
-	mov.l	@r8+,r0
+	mov.l	@(8,r8),r0
 	bra	2f
 	 mov.l	r0,@-r15
 1:
@@ -107,10 +106,11 @@ ENTRY(exception_handler)
 	mov.l	r0,@-r15	
 	mov.l	@r2+,r0		! old R2
 	mov.l	r0,@-r15	
-	mov.l	@r2+,r0		! old R1
-	mov.l	r0,@-r15	
-	mov.l	@r2+,r0		! old R0
+	mov.l	@(4,r2),r0	! old R1
 	mov.l	r0,@-r15	
+	mov.l	@r2,r0		! old R0
+	mov.l	r0,@-r15
+	add	#8,r2
 	mov.l	@r2+,r3		! old PC
 	mov.l	@r2+,r0		! old SR
 	add	#-4,r2		! exception frame stub (sr)
@@ -135,14 +135,12 @@ ENTRY(exception_handler)
 	mov.l	r6,@-r2
 	mov.l	r5,@-r2
 	mov.l	r4,@-r2
+	mov	r1,r9
 	mov.l	@(OFF_R0,r15),r0
 	mov.l	@(OFF_R1,r15),r1
 	mov.l	@(OFF_R2,r15),r2
 	mov.l	@(OFF_R3,r15),r3
 2:
-	mov	#OFF_TRA,r8
-	add	r15,r8
-	mov.l	@r8,r9	
 	mov	#64,r8
 	cmp/hs	r8,r9
 	bt	interrupt_entry	! vec >= 64 is interrupt
@@ -150,26 +148,14 @@ ENTRY(exception_handler)
 	cmp/hs	r8,r9
 	bt	trap_entry	! 64 > vec >= 32  is trap
 
-#if defined(CONFIG_SH_FPU)
-	mov     #13,r8
-	cmp/eq  r8,r9
-	bt      10f             ! fpu
-	nop
-#endif
-
 	mov.l	4f,r8
 	mov	r9,r4
 	shll2	r9
 	add	r9,r8
-	mov.l	@r8,r8
-	mov	#0,r9
-	cmp/eq	r9,r8
+	mov.l	@r8,r8		! exception handler address
+	tst	r8,r8
 	bf	3f
 	mov.l	8f,r8		! unhandled exception
-#if defined(CONFIG_SH_FPU)
-10:
-	mov.l	9f, r8		! unhandled exception
-#endif
 3:
 	mov.l	5f,r10
 	jmp	@r8
@@ -188,10 +174,7 @@ interrupt_entry:
 5:	.long	ret_from_exception
 6:	.long	ret_from_irq
 7:	.long	do_IRQ
-8:	.long	do_exception_error
-#ifdef CONFIG_SH_FPU
-9:	.long	fpu_error_trap_handler
-#endif
+8:	.long	exception_error
 
 trap_entry:
 	mov	#0x30,r8
@@ -200,24 +183,9 @@ trap_entry:
 	add	#-0x10,r9	! convert SH2 to SH3/4 ABI
 1:	
 	shll2	r9			! TRA
-	mov	#OFF_TRA,r8
-	add	r15,r8
-	mov.l	r9,@r8
-	mov	r9,r8
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	2f, r9
-	jsr	@r9
-	 nop
-#endif
-	sti
-	bra	system_call
-	 nop
+	bra	system_call	! jump common systemcall entry
+	 mov	r9,r8
 	
-	.align	2
-#ifdef CONFIG_TRACE_IRQFLAGS
-2:	.long	trace_hardirqs_on
-#endif
-
 #if defined(CONFIG_SH_STANDARD_BIOS)
 	/* Unwind the stack and jmp to the debug entry */
 ENTRY(sh_bios_handler)
@@ -240,7 +208,7 @@ ENTRY(sh_bios_handler)
 	mov.l	@r2,r2
 	stc	sr,r3
 	mov.l	r2,@r0
-	mov.l	r3,@r0
+	mov.l	r3,@(4,r0)
 	mov.l	r1,@(8,r0)	
 	mov.l	@r15+, r0
 	mov.l	@r15+, r1
@@ -272,22 +240,30 @@ ENTRY(address_error_trap_handler)
 	mov.l	1f,r0
 	jmp	@r0
 	 mov	#0,r5				! writeaccess is unknown
-	.align	2
 
+	.align	2
 1:	.long	do_address_error
 
 restore_all:
-	cli
-#ifdef CONFIG_TRACE_IRQFLAGS
-	mov.l	1f, r0
-	jsr	@r0
-	 nop
-#endif
+	stc	sr,r0
+	or	#0xf0,r0
+	ldc	r0,sr				! all interrupt block (same BL = 1)
+	! restore special register
+	! overlap exception frame
+	mov	r15,r0
+	add	#17*4,r0
+	lds.l	@r0+,pr
+	add	#4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
 	mov	r15,r0
 	mov.l	$cpu_mode,r2
 	mov	#OFF_SR,r3
 	mov.l	@(r0,r3),r1
-	mov.l	r1,@r2
+	mov.l	__md_bit,r3
+	and	r1,r3				! copy MD bit
+	mov.l	r3,@r2
 	shll2	r1				! clear MD bit
 	shlr2	r1
 	mov.l	@(OFF_SP,r0),r2
@@ -297,12 +273,6 @@ restore_all:
 	mov	#OFF_PC,r3
 	mov.l	@(r0,r3),r1
 	mov.l	r1,@r2				! set pc
-	add	#4*16+4,r0
-	lds.l	@r0+,pr
-	add	#4,r0				! skip sr
-	ldc.l	@r0+,gbr
-	lds.l	@r0+,mach
-	lds.l	@r0+,macl
 	get_current_thread_info r0, r1
 	mov.l	$current_thread_info,r1
 	mov.l	r0,@r1
@@ -326,9 +296,8 @@ restore_all:
 	 nop
 
 	.align 2
-#ifdef CONFIG_TRACE_IRQFLAGS
-1:     .long   trace_hardirqs_off
-#endif
+__md_bit:
+	.long	0x40000000
 $current_thread_info:
 	.long	__current_thread_info
 $cpu_mode:	
diff --git a/arch/sh/kernel/cpu/sh2/ex.S b/arch/sh/kernel/cpu/sh2/ex.S
index 6d285af7846c..85b0bf81fc1d 100644
--- a/arch/sh/kernel/cpu/sh2/ex.S
+++ b/arch/sh/kernel/cpu/sh2/ex.S
@@ -18,16 +18,17 @@
 exception_entry:	
 no	=	0
 	.rept	256
-	mov.l	r0,@-sp
-	mov	#no,r0
+	mov.l	r1,@-sp
 	bra	exception_trampoline
-	and	#0xff,r0
+	mov	#no,r1
 no	=	no + 1
 	.endr
 exception_trampoline:
-	mov.l	r1,@-sp
-	mov.l	$exception_handler,r1
-	jmp	@r1
+	mov.l	r0,@-sp
+	mov.l	$exception_handler,r0
+	extu.b	r1,r1
+	jmp	@r0
+	  extu.w	r1,r1
 
 	.align	2
 $exception_entry:
@@ -41,6 +42,6 @@ $exception_handler:
 ENTRY(vbr_base)
 vector	=	0
 	.rept	256
-	.long	exception_entry + vector * 8
+	.long	exception_entry + vector * 6
 vector	=	vector + 1
 	.endr
diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
index cc530f4d84d6..56e5878e5516 100644
--- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c
+++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c
@@ -96,8 +96,32 @@ static struct platform_device sci_device = {
 	},
 };
 
+static struct resource eth_resources[] = {
+	[0] = {
+		.start = 0xfb000000,
+		.end =   0xfb0001c8,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = 85,
+		.end = 85,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device eth_device = {
+	.name = "sh-eth",
+	.id	= -1,
+	.dev = {
+		.platform_data = (void *)1,
+	},
+	.num_resources = ARRAY_SIZE(eth_resources),
+	.resource = eth_resources,
+};
+
 static struct platform_device *sh7619_devices[] __initdata = {
 	&sci_device,
+	&eth_device,
 };
 
 static int __init sh7619_devices_setup(void)
diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile
index 7e2b90cfa7bf..1ab1ecf4c768 100644
--- a/arch/sh/kernel/cpu/sh2a/Makefile
+++ b/arch/sh/kernel/cpu/sh2a/Makefile
@@ -4,7 +4,7 @@
 
 obj-y	:= common.o probe.o opcode_helper.o
 
-common-y	+= $(addprefix ../sh2/, ex.o entry.o)
+common-y	+= ex.o entry.o
 
 obj-$(CONFIG_SH_FPU)	+= fpu.o
 
diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S
new file mode 100644
index 000000000000..ab3903eeda5c
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/entry.S
@@ -0,0 +1,249 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/entry.S
+ *
+ * The SH-2A exception entry
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ * Based on arch/sh/kernel/cpu/sh2/entry.S
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <cpu/mmu_context.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/page.h>
+	
+/* Offsets to the stack */
+OFF_R0  =  0		/* Return value. New ABI also arg4 */
+OFF_R1  =  4     	/* New ABI: arg5 */
+OFF_R2  =  8     	/* New ABI: arg6 */
+OFF_R3  =  12     	/* New ABI: syscall_nr */
+OFF_R4  =  16     	/* New ABI: arg0 */
+OFF_R5  =  20     	/* New ABI: arg1 */
+OFF_R6  =  24     	/* New ABI: arg2 */
+OFF_R7  =  28     	/* New ABI: arg3 */
+OFF_SP	=  (15*4)
+OFF_PC  =  (16*4)
+OFF_SR	=  (16*4+2*4)
+OFF_TRA	=  (16*4+6*4)
+
+#include <asm/entry-macros.S>
+
+ENTRY(exception_handler)
+	! stack
+	! r0 <- point sp
+	! r1
+	! pc
+	! sr
+	! r0 = temporary
+	! r1 = vector (pseudo EXPEVT / INTEVT / TRA)
+	mov.l	r2,@-sp
+	cli
+	mov.l	$cpu_mode,r2
+	bld.b	#6,@(0,r2)	!previus SR.MD
+	bst.b	#6,@(4*4,r15)	!set cpu mode to SR.MD
+	bt	1f
+	! switch to kernel mode
+	bset.b	#6,@(0,r2)	!set SR.MD
+	mov.l	$current_thread_info,r2
+	mov.l	@r2,r2
+	mov	#(THREAD_SIZE >> 8),r0
+	shll8	r0
+	add	r2,r0		! r0 = kernel stack tail
+	mov	r15,r2		! r2 = user stack top
+	mov	r0,r15		! switch kernel stack
+	mov.l	r1,@-r15	! TRA
+	sts.l	macl, @-r15
+	sts.l	mach, @-r15
+	stc.l	gbr, @-r15
+	mov.l	@(4*4,r2),r0
+	mov.l	r0,@-r15	! original SR
+	sts.l	pr,@-r15
+	mov.l	@(3*4,r2),r0
+	mov.l	r0,@-r15	! original PC
+	mov	r2,r0
+	add	#(3+2)*4,r0	! rewind r0 - r3 + exception frame
+	lds	r0,pr		! pr = original SP
+	movmu.l	r3,@-r15	! save regs
+	mov	r2,r8		! r8 =  previus stack top
+	mov	r1,r9		! r9 = interrupt vector
+	! restore previous stack
+	mov.l	@r8+,r2
+	mov.l	@r8+,r0
+	mov.l	@r8+,r1
+	bra	2f
+	 movml.l r2,@-r15
+1:
+	! in kernel exception
+	mov	r15,r2
+	add	#-((OFF_TRA + 4) - OFF_PC) + 5*4,r15
+	movmu.l	r3,@-r15
+	mov	r2,r8		! r8 = previous stack top
+	mov	r1,r9		! r9 = interrupt vector
+	! restore exception frame & regs
+	mov.l	@r8+,r2		! old R2
+	mov.l	@r8+,r0		! old R0
+	mov.l	@r8+,r1		! old R1
+	mov.l	@r8+,r10	! old PC
+	mov.l	@r8+,r11	! old SR
+	movml.l	r2,@-r15
+	mov.l	r10,@(OFF_PC,r15)
+	mov.l	r11,@(OFF_SR,r15)
+	mov.l	r8,@(OFF_SP,r15)	! save old sp
+	mov	r15,r8
+	add	#OFF_TRA + 4,r8
+	mov.l	r9,@-r8
+	sts.l	macl,@-r8
+	sts.l	mach,@-r8
+	stc.l	gbr,@-r8
+	add	#-4,r8
+	sts.l	pr,@-r8
+2:
+	! dispatch exception / interrupt
+	mov	#64,r8
+	cmp/hs	r8,r9
+	bt	interrupt_entry	! vec >= 64 is interrupt
+	mov	#32,r8
+	cmp/hs	r8,r9
+	bt	trap_entry	! 64 > vec >= 32  is trap
+
+	mov.l	4f,r8
+	mov	r9,r4
+	shll2	r9
+	add	r9,r8
+	mov.l	@r8,r8		! exception handler address
+	tst	r8,r8
+	bf	3f
+	mov.l	8f,r8		! unhandled exception
+3:
+	mov.l	5f,r10
+	jmp	@r8
+	 lds	r10,pr
+
+interrupt_entry:
+	mov	r9,r4
+	mov	r15,r5
+	mov.l	7f,r8
+	mov.l	6f,r9
+	jmp	@r8
+	 lds	r9,pr
+
+	.align	2
+4:	.long	exception_handling_table
+5:	.long	ret_from_exception
+6:	.long	ret_from_irq
+7:	.long	do_IRQ
+8:	.long	exception_error
+
+trap_entry:
+	mov	#0x30,r8
+	cmp/ge	r8,r9		! vector 0x20-0x2f is systemcall
+	bt	1f
+	add	#-0x10,r9	! convert SH2 to SH3/4 ABI
+1:	
+	shll2	r9			! TRA
+	bra	system_call	! jump common systemcall entry
+	 mov	r9,r8
+	
+#if defined(CONFIG_SH_STANDARD_BIOS)
+	/* Unwind the stack and jmp to the debug entry */
+ENTRY(sh_bios_handler)
+	mov	r15,r0
+	add	#(22-4)*4-4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
+	mov	r15,r0
+	mov.l	@(OFF_SP,r0),r1
+	mov.l	@(OFF_SR,r2),r3
+	mov.l	r3,@-r1
+	mov.l	@(OFF_SP,r2),r3
+	mov.l	r3,@-r1
+	mov	r15,r0
+	add	#(22-4)*4-8,r0
+	mov.l	1f,r2
+	mov.l	@r2,r2
+	stc	sr,r3
+	mov.l	r2,@r0
+	mov.l	r3,@(4,r0)
+	mov.l	r1,@(8,r0)
+	movml.l	@r15+,r14
+	add	#8,r15
+	lds.l	@r15+, pr
+	rte
+	 mov.l	@r15+,r15
+	.align	2
+1:	.long	gdb_vbr_vector
+#endif /* CONFIG_SH_STANDARD_BIOS */
+
+ENTRY(address_error_trap_handler)
+	mov	r15,r4				! regs
+	mov.l	@(OFF_PC,r15),r6		! pc
+	mov.l	1f,r0
+	jmp	@r0
+	 mov	#0,r5				! writeaccess is unknown
+
+	.align	2
+1:	.long	do_address_error
+
+restore_all:
+	stc	sr,r0
+	or	#0xf0,r0
+	ldc	r0,sr				! all interrupt block (same BL = 1)
+	! restore special register
+	! overlap exception frame
+	mov	r15,r0
+	add	#17*4,r0
+	lds.l	@r0+,pr
+	add	#4,r0
+	ldc.l	@r0+,gbr
+	lds.l	@r0+,mach
+	lds.l	@r0+,macl
+	mov	r15,r0
+	mov.l	$cpu_mode,r2
+	bld.b	#6,@(OFF_SR,r15)
+	bst.b	#6,@(0,r2)			! save CPU mode
+	mov.l	@(OFF_SR,r0),r1
+	shll2	r1
+	shlr2	r1				! clear MD bit
+	mov.l	@(OFF_SP,r0),r2
+	add	#-8,r2
+	mov.l	r2,@(OFF_SP,r0)			! point exception frame top
+	mov.l	r1,@(4,r2)			! set sr
+	mov.l	@(OFF_PC,r0),r1
+	mov.l	r1,@r2				! set pc
+	get_current_thread_info r0, r1
+	mov.l	$current_thread_info,r1
+	mov.l	r0,@r1
+	movml.l	@r15+,r14
+	mov.l	@r15,r15
+	rte
+	 nop
+
+	.align 2
+$current_thread_info:
+	.long	__current_thread_info
+$cpu_mode:	
+	.long	__cpu_mode
+		
+! common exception handler
+#include "../../entry-common.S"
+	
+	.data
+! cpu operation mode 
+! bit30 = MD (compatible SH3/4)
+__cpu_mode:
+	.long	0x40000000
+		
+	.section	.bss
+__current_thread_info:
+	.long	0
+
+ENTRY(exception_handling_table)
+	.space	4*32
diff --git a/arch/sh/kernel/cpu/sh2a/ex.S b/arch/sh/kernel/cpu/sh2a/ex.S
new file mode 100644
index 000000000000..3ead9e63965a
--- /dev/null
+++ b/arch/sh/kernel/cpu/sh2a/ex.S
@@ -0,0 +1,72 @@
+/*
+ * arch/sh/kernel/cpu/sh2a/ex.S
+ *
+ * The SH-2A exception vector table
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/linkage.h>
+
+!
+! convert Exception Vector to Exception Number
+!
+
+! exception no 0 to 255
+exception_entry0:
+no	=	0
+	.rept	256
+	mov.l	r1,@-sp
+	bra	exception_trampoline0
+	mov	#no,r1
+no	=	no + 1
+	.endr
+exception_trampoline0:
+	mov.l	r0,@-sp
+	mov.l	1f,r0
+	extu.b	r1,r1
+	jmp	@r0
+	  extu.w	r1,r1
+	 
+	.align	2
+1:	.long	exception_handler
+
+! exception no 256 to 511
+exception_entry1:
+no	=	0
+	.rept	256
+	mov.l	r1,@-sp
+	bra	exception_trampoline1
+	mov	#no,r1
+no	=	no + 1
+	.endr
+exception_trampoline1:
+	mov.l	r0,@-sp
+	extu.b	r1,r1
+	movi20	#0x100,r0
+	add	r0,r1
+	mov.l	1f,r0
+	jmp	@r0
+	  extu.w	r1,r1
+	
+	.align	2
+1:	.long	exception_handler
+
+	!
+! Exception Vector Base
+!
+	.align	2
+ENTRY(vbr_base)
+vector	=	0
+	.rept	256
+	.long	exception_entry0 + vector * 6
+vector	=	vector + 1
+	.endr
+	.rept	256
+	.long	exception_entry1 + vector * 6
+vector	=	vector + 1
+	.endr
diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S
index 4004073f98cd..3fe482dd05c1 100644
--- a/arch/sh/kernel/cpu/sh3/entry.S
+++ b/arch/sh/kernel/cpu/sh3/entry.S
@@ -14,7 +14,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/thread_info.h>
 #include <asm/unistd.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 #include <asm/page.h>
 
 ! NOTE:
diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S
index 11b6d9c6edae..dac429726899 100644
--- a/arch/sh/kernel/cpu/sh3/ex.S
+++ b/arch/sh/kernel/cpu/sh3/ex.S
@@ -4,7 +4,7 @@
  *  The SH-3 and SH-4 exception vector table.
 
  *  Copyright (C) 1999, 2000, 2002  Niibe Yutaka
- *  Copyright (C) 2003 - 2006  Paul Mundt
+ *  Copyright (C) 2003 - 2008  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -12,13 +12,30 @@
  */
 #include <linux/linkage.h>
 
+#if !defined(CONFIG_MMU)
+#define	tlb_miss_load			exception_error
+#define tlb_miss_store			exception_error
+#define initial_page_write		exception_error
+#define tlb_protection_violation_load	exception_error
+#define tlb_protection_violation_store	exception_error
+#define address_error_load		exception_error
+#define address_error_store		exception_error
+#endif
+
+#if !defined(CONFIG_SH_FPU)
+#define	fpu_error_trap_handler		exception_error
+#endif
+
+#if !defined(CONFIG_KGDB_NMI)
+#define kgdb_handle_exception		exception_error
+#endif
+
 	.align 2
 	.data
 
 ENTRY(exception_handling_table)
 	.long	exception_error		/* 000 */
 	.long	exception_error
-#if defined(CONFIG_MMU)
 	.long	tlb_miss_load		/* 040 */
 	.long	tlb_miss_store
 	.long	initial_page_write
@@ -26,30 +43,13 @@ ENTRY(exception_handling_table)
 	.long	tlb_protection_violation_store
 	.long	address_error_load
 	.long	address_error_store	/* 100 */
-#else
-	.long	exception_error	! tlb miss load		/* 040 */
-	.long	exception_error	! tlb miss store
-	.long	exception_error	! initial page write
-	.long	exception_error	! tlb prot violation load
-	.long	exception_error	! tlb prot violation store
-	.long	exception_error	! address error load
-	.long	exception_error	! address error store	/* 100 */
-#endif
-#if defined(CONFIG_SH_FPU)
 	.long	fpu_error_trap_handler	/* 120 */
-#else
-	.long	exception_error		/* 120 */
-#endif
 	.long	exception_error		/* 140 */
 	.long	system_call	! Unconditional Trap	 /* 160 */
 	.long	exception_error	! reserved_instruction (filled by trap_init) /* 180 */
 	.long	exception_error	! illegal_slot_instruction (filled by trap_init) /*1A0*/
 ENTRY(nmi_slot)
-#if defined (CONFIG_KGDB_NMI)
 	.long	kgdb_handle_exception	/* 1C0 */	! Allow trap to debugger
-#else
-	.long	exception_none	/* 1C0 */	! Not implemented yet
-#endif
 ENTRY(user_break_point_trap)
 	.long	break_point_trap	/* 1E0 */
 
diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c
index 8020796139f1..2d452f67fb87 100644
--- a/arch/sh/kernel/cpu/sh4/fpu.c
+++ b/arch/sh/kernel/cpu/sh4/fpu.c
@@ -13,7 +13,7 @@
 #include <linux/sched.h>
 #include <linux/signal.h>
 #include <linux/io.h>
-#include <asm/cpu/fpu.h>
+#include <cpu/fpu.h>
 #include <asm/processor.h>
 #include <asm/system.h>
 #include <asm/fpu.h>
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index be4926969181..2e42572b1b11 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -50,14 +50,18 @@ int __init detect_cpu_and_cache_system(void)
 	boot_cpu_data.dcache.ways		= 1;
 	boot_cpu_data.dcache.linesz		= L1_CACHE_BYTES;
 
+	/* We don't know the chip cut */
+	boot_cpu_data.cut_major = boot_cpu_data.cut_minor = -1;
+
 	/*
 	 * Setup some generic flags we can probe on SH-4A parts
 	 */
-	if (((pvr >> 24) & 0xff) == 0x10) {
+	if (((pvr >> 16) & 0xff) == 0x10) {
 		if ((cvr & 0x10000000) == 0)
 			boot_cpu_data.flags |= CPU_HAS_DSP;
 
 		boot_cpu_data.flags |= CPU_HAS_LLSC;
+		boot_cpu_data.cut_major = pvr & 0x7f;
 	}
 
 	/* FPU detection works for everyone */
diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c
index 7b2d337ee412..828cb57cb959 100644
--- a/arch/sh/kernel/cpu/sh4/softfloat.c
+++ b/arch/sh/kernel/cpu/sh4/softfloat.c
@@ -36,7 +36,7 @@
  * and Kamel Khelifi <kamel.khelifi@st.com>
  */
 #include <linux/kernel.h>
-#include <asm/cpu/fpu.h>
+#include <cpu/fpu.h>
 
 #define LIT64( a ) a##LL
 
diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c
index 9561b02ade0e..8a8a993f55ea 100644
--- a/arch/sh/kernel/cpu/sh4/sq.c
+++ b/arch/sh/kernel/cpu/sh4/sq.c
@@ -22,7 +22,7 @@
 #include <linux/io.h>
 #include <asm/page.h>
 #include <asm/cacheflush.h>
-#include <asm/cpu/sq.h>
+#include <cpu/sq.h>
 
 struct sq_mapping;
 
@@ -199,7 +199,7 @@ EXPORT_SYMBOL(sq_remap);
 
 /**
  * sq_unmap - Unmap a Store Queue allocation
- * @map: Pre-allocated Store Queue mapping.
+ * @vaddr: Pre-allocated Store Queue mapping.
  *
  * Unmaps the store queue allocation @map that was previously created by
  * sq_remap(). Also frees up the pte that was previously inserted into
diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile
index a880e7968750..9381ad8da263 100644
--- a/arch/sh/kernel/cpu/sh4a/Makefile
+++ b/arch/sh/kernel/cpu/sh4a/Makefile
@@ -21,7 +21,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7763)	:= clock-sh7763.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7770)	:= clock-sh7770.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7780)	:= clock-sh7780.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7785)	:= clock-sh7785.o
-clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7343.o
+clock-$(CONFIG_CPU_SUBTYPE_SH7343)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7722)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7723)	:= clock-sh7722.o
 clock-$(CONFIG_CPU_SUBTYPE_SH7366)	:= clock-sh7722.o
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
deleted file mode 100644
index 7adc4f16e95a..000000000000
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * arch/sh/kernel/cpu/sh4a/clock-sh7343.c
- *
- * SH7343/SH7722 support for the clock framework
- *
- *  Copyright (C) 2006  Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <asm/clock.h>
-#include <asm/freq.h>
-
-/*
- * SH7343/SH7722 uses a common set of multipliers and divisors, so this
- * is quite simple..
- */
-static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 };
-
-#define pll_calc() (((ctrl_inl(FRQCR) >> 24) & 0x1f) + 1)
-
-static void master_clk_init(struct clk *clk)
-{
-	clk->parent = clk_get(NULL, "cpu_clk");
-}
-
-static void master_clk_recalc(struct clk *clk)
-{
-	int idx = (ctrl_inl(FRQCR) & 0x000f);
-	clk->rate *= clk->parent->rate * multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_master_clk_ops = {
-	.init		= master_clk_init,
-	.recalc		= master_clk_recalc,
-};
-
-static void module_clk_init(struct clk *clk)
-{
-	clk->parent = NULL;
-	clk->rate = CONFIG_SH_PCLK_FREQ;
-}
-
-static struct clk_ops sh7343_module_clk_ops = {
-	.init		= module_clk_init,
-};
-
-static void bus_clk_init(struct clk *clk)
-{
-	clk->parent = clk_get(NULL, "cpu_clk");
-}
-
-static void bus_clk_recalc(struct clk *clk)
-{
-	int idx = (ctrl_inl(FRQCR) >> 8) & 0x000f;
-	clk->rate = clk->parent->rate * multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_bus_clk_ops = {
-	.init		= bus_clk_init,
-	.recalc		= bus_clk_recalc,
-};
-
-static void cpu_clk_init(struct clk *clk)
-{
-	clk->parent = clk_get(NULL, "module_clk");
-	clk->flags |= CLK_RATE_PROPAGATES;
-	clk_set_rate(clk, clk_get_rate(clk));
-}
-
-static void cpu_clk_recalc(struct clk *clk)
-{
-	int idx = (ctrl_inl(FRQCR) >> 20) & 0x000f;
-	clk->rate = clk->parent->rate * pll_calc() *
-		multipliers[idx] / divisors[idx];
-}
-
-static struct clk_ops sh7343_cpu_clk_ops = {
-	.init		= cpu_clk_init,
-	.recalc		= cpu_clk_recalc,
-};
-
-static struct clk_ops *sh7343_clk_ops[] = {
-	&sh7343_master_clk_ops,
-	&sh7343_module_clk_ops,
-	&sh7343_bus_clk_ops,
-	&sh7343_cpu_clk_ops,
-};
-
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
-{
-	if (idx < ARRAY_SIZE(sh7343_clk_ops))
-		*ops = sh7343_clk_ops[idx];
-}
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
index 299138ebe160..db913855c2fd 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c
@@ -1,7 +1,7 @@
 /*
  * arch/sh/kernel/cpu/sh4a/clock-sh7722.c
  *
- * SH7722 & SH7366 support for the clock framework
+ * SH7343, SH7722, SH7723 & SH7366 support for the clock framework
  *
  * Copyright (c) 2006-2007 Nomad Global Solutions Inc
  * Based on code for sh7343 by Paul Mundt
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 #include <linux/errno.h>
+#include <linux/stringify.h>
 #include <asm/clock.h>
 #include <asm/freq.h>
 
@@ -411,40 +412,40 @@ static struct clk_ops sh7722_frqcr_clk_ops = {
  * clock ops methods for SIU A/B and IrDA clock
  *
  */
-static int sh7722_siu_which(struct clk *clk)
+
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
+
+static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id)
 {
-	if (!strcmp(clk->name, "siu_a_clk"))
-		return 0;
-	if (!strcmp(clk->name, "siu_b_clk"))
-		return 1;
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-	if (!strcmp(clk->name, "irda_clk"))
-		return 2;
-#endif
-	return -EINVAL;
+	unsigned long r;
+	int div;
+
+	r = ctrl_inl(clk->arch_flags);
+	div = sh7722_find_divisors(clk->parent->rate, rate);
+	if (div < 0)
+		return div;
+	r = (r & ~0xF) | div;
+	ctrl_outl(r, clk->arch_flags);
+	return 0;
 }
 
-static unsigned long sh7722_siu_regs[] = {
-	[0] = SCLKACR,
-	[1] = SCLKBCR,
-#if defined(CONFIG_CPU_SUBTYPE_SH7722)
-	[2] = IrDACLKCR,
-#endif
-};
+static void sh7722_siu_recalc(struct clk *clk)
+{
+	unsigned long r;
+
+	r = ctrl_inl(clk->arch_flags);
+	clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF];
+}
 
 static int sh7722_siu_start_stop(struct clk *clk, int enable)
 {
-	int siu = sh7722_siu_which(clk);
 	unsigned long r;
 
-	if (siu < 0)
-		return siu;
-	BUG_ON(siu > 2);
-	r = ctrl_inl(sh7722_siu_regs[siu]);
+	r = ctrl_inl(clk->arch_flags);
 	if (enable)
-		ctrl_outl(r & ~(1 << 8), sh7722_siu_regs[siu]);
+		ctrl_outl(r & ~(1 << 8), clk->arch_flags);
 	else
-		ctrl_outl(r | (1 << 8), sh7722_siu_regs[siu]);
+		ctrl_outl(r | (1 << 8), clk->arch_flags);
 	return 0;
 }
 
@@ -458,6 +459,15 @@ static void sh7722_siu_disable(struct clk *clk)
 	sh7722_siu_start_stop(clk, 0);
 }
 
+static struct clk_ops sh7722_siu_clk_ops = {
+	.recalc = sh7722_siu_recalc,
+	.set_rate = sh7722_siu_set_rate,
+	.enable = sh7722_siu_enable,
+	.disable = sh7722_siu_disable,
+};
+
+#endif /* CONFIG_CPU_SUBTYPE_SH7343 */
+
 static void sh7722_video_enable(struct clk *clk)
 {
 	unsigned long r;
@@ -494,43 +504,6 @@ static void sh7722_video_recalc(struct clk *clk)
 	clk->rate = clk->parent->rate / ((r & 0x3F) + 1);
 }
 
-static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id)
-{
-	int siu = sh7722_siu_which(clk);
-	unsigned long r;
-	int div;
-
-	if (siu < 0)
-		return siu;
-	BUG_ON(siu > 2);
-	r = ctrl_inl(sh7722_siu_regs[siu]);
-	div = sh7722_find_divisors(clk->parent->rate, rate);
-	if (div < 0)
-		return div;
-	r = (r & ~0xF) | div;
-	ctrl_outl(r, sh7722_siu_regs[siu]);
-	return 0;
-}
-
-static void sh7722_siu_recalc(struct clk *clk)
-{
-	int siu = sh7722_siu_which(clk);
-	unsigned long r;
-
-	if (siu < 0)
-		return /* siu */ ;
-	BUG_ON(siu > 2);
-	r = ctrl_inl(sh7722_siu_regs[siu]);
-	clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF];
-}
-
-static struct clk_ops sh7722_siu_clk_ops = {
-	.recalc = sh7722_siu_recalc,
-	.set_rate = sh7722_siu_set_rate,
-	.enable = sh7722_siu_enable,
-	.disable = sh7722_siu_disable,
-};
-
 static struct clk_ops sh7722_video_clk_ops = {
 	.recalc = sh7722_video_recalc,
 	.set_rate = sh7722_video_set_rate,
@@ -560,6 +533,9 @@ static struct clk sh7722_sdram_clock = {
 	.ops = &sh7722_frqcr_clk_ops,
 };
 
+
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
+
 /*
  * these three clocks - SIU A, SIU B, IrDA - share the same clk_ops
  * methods of clk_ops determine which register they should access by
@@ -567,36 +543,151 @@ static struct clk sh7722_sdram_clock = {
  */
 static struct clk sh7722_siu_a_clock = {
 	.name = "siu_a_clk",
+	.arch_flags = SCLKACR,
 	.ops = &sh7722_siu_clk_ops,
 };
 
 static struct clk sh7722_siu_b_clock = {
 	.name = "siu_b_clk",
+	.arch_flags = SCLKBCR,
 	.ops = &sh7722_siu_clk_ops,
 };
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7722)
 static struct clk sh7722_irda_clock = {
 	.name = "irda_clk",
+	.arch_flags = IrDACLKCR,
 	.ops = &sh7722_siu_clk_ops,
 };
 #endif
+#endif /* CONFIG_CPU_SUBTYPE_SH7343 */
 
 static struct clk sh7722_video_clock = {
 	.name = "video_clk",
 	.ops = &sh7722_video_clk_ops,
 };
 
+static int sh7722_mstpcr_start_stop(struct clk *clk, unsigned long reg,
+				    int enable)
+{
+	unsigned long bit = clk->arch_flags;
+	unsigned long r;
+
+	r = ctrl_inl(reg);
+
+	if (enable)
+		r &= ~(1 << bit);
+	else
+		r |= (1 << bit);
+
+	ctrl_outl(r, reg);
+	return 0;
+}
+
+static void sh7722_mstpcr0_enable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR0, 1);
+}
+
+static void sh7722_mstpcr0_disable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR0, 0);
+}
+
+static void sh7722_mstpcr1_enable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR1, 1);
+}
+
+static void sh7722_mstpcr1_disable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR1, 0);
+}
+
+static void sh7722_mstpcr2_enable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR2, 1);
+}
+
+static void sh7722_mstpcr2_disable(struct clk *clk)
+{
+	sh7722_mstpcr_start_stop(clk, MSTPCR2, 0);
+}
+
+static struct clk_ops sh7722_mstpcr0_clk_ops = {
+	.enable = sh7722_mstpcr0_enable,
+	.disable = sh7722_mstpcr0_disable,
+};
+
+static struct clk_ops sh7722_mstpcr1_clk_ops = {
+	.enable = sh7722_mstpcr1_enable,
+	.disable = sh7722_mstpcr1_disable,
+};
+
+static struct clk_ops sh7722_mstpcr2_clk_ops = {
+	.enable = sh7722_mstpcr2_enable,
+	.disable = sh7722_mstpcr2_disable,
+};
+
+#define DECLARE_MSTPCRN(regnr, bitnr, bitstr)		\
+{							\
+	.name = "mstp" __stringify(regnr) bitstr,	\
+	.arch_flags = bitnr,				\
+	.ops = &sh7722_mstpcr ## regnr ## _clk_ops,	\
+}
+
+#define DECLARE_MSTPCR(regnr) \
+	DECLARE_MSTPCRN(regnr, 31, "31"), \
+	DECLARE_MSTPCRN(regnr, 30, "30"), \
+	DECLARE_MSTPCRN(regnr, 29, "29"), \
+	DECLARE_MSTPCRN(regnr, 28, "28"), \
+	DECLARE_MSTPCRN(regnr, 27, "27"), \
+	DECLARE_MSTPCRN(regnr, 26, "26"), \
+	DECLARE_MSTPCRN(regnr, 25, "25"), \
+	DECLARE_MSTPCRN(regnr, 24, "24"), \
+	DECLARE_MSTPCRN(regnr, 23, "23"), \
+	DECLARE_MSTPCRN(regnr, 22, "22"), \
+	DECLARE_MSTPCRN(regnr, 21, "21"), \
+	DECLARE_MSTPCRN(regnr, 20, "20"), \
+	DECLARE_MSTPCRN(regnr, 19, "19"), \
+	DECLARE_MSTPCRN(regnr, 18, "18"), \
+	DECLARE_MSTPCRN(regnr, 17, "17"), \
+	DECLARE_MSTPCRN(regnr, 16, "16"), \
+	DECLARE_MSTPCRN(regnr, 15, "15"), \
+	DECLARE_MSTPCRN(regnr, 14, "14"), \
+	DECLARE_MSTPCRN(regnr, 13, "13"), \
+	DECLARE_MSTPCRN(regnr, 12, "12"), \
+	DECLARE_MSTPCRN(regnr, 11, "11"), \
+	DECLARE_MSTPCRN(regnr, 10, "10"), \
+	DECLARE_MSTPCRN(regnr, 9, "09"), \
+	DECLARE_MSTPCRN(regnr, 8, "08"), \
+	DECLARE_MSTPCRN(regnr, 7, "07"), \
+	DECLARE_MSTPCRN(regnr, 6, "06"), \
+	DECLARE_MSTPCRN(regnr, 5, "05"), \
+	DECLARE_MSTPCRN(regnr, 4, "04"), \
+	DECLARE_MSTPCRN(regnr, 3, "03"), \
+	DECLARE_MSTPCRN(regnr, 2, "02"), \
+	DECLARE_MSTPCRN(regnr, 1, "01"), \
+	DECLARE_MSTPCRN(regnr, 0, "00")
+
+static struct clk sh7722_mstpcr[] = {
+	DECLARE_MSTPCR(0),
+	DECLARE_MSTPCR(1),
+	DECLARE_MSTPCR(2),
+};
+
 static struct clk *sh7722_clocks[] = {
 	&sh7722_umem_clock,
 	&sh7722_sh_clock,
 	&sh7722_peripheral_clock,
 	&sh7722_sdram_clock,
+#ifndef CONFIG_CPU_SUBTYPE_SH7343
 	&sh7722_siu_a_clock,
 	&sh7722_siu_b_clock,
 #if defined(CONFIG_CPU_SUBTYPE_SH7722)
 	&sh7722_irda_clock,
 #endif
+#endif
 	&sh7722_video_clock,
 };
 
@@ -629,5 +720,11 @@ int __init arch_clk_init(void)
 		clk_register(sh7722_clocks[i]);
 	}
 	clk_put(master);
+
+	for (i = 0; i < ARRAY_SIZE(sh7722_mstpcr); i++) {
+		pr_debug( "Registering mstpcr '%s'\n", sh7722_mstpcr[i].name);
+		clk_register(&sh7722_mstpcr[i]);
+	}
+
 	return 0;
 }
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
index 6d4f50cd4aaf..78881b4214da 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c
@@ -11,6 +11,104 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
+
+static struct resource iic0_resources[] = {
+	[0] = {
+		.name	= "IIC0",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.end    = 99,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic0_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic0_resources),
+	.resource       = iic0_resources,
+};
+
+static struct resource iic1_resources[] = {
+	[0] = {
+		.name	= "IIC1",
+		.start  = 0x04750000,
+		.end    = 0x04750017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 44,
+		.end    = 47,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic1_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic1_resources),
+	.resource       = iic1_resources,
+};
+
+static struct uio_info vpu_platform_data = {
+	.name = "VPU4",
+	.version = "0",
+	.irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe9022eb,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 54,
+};
+
+static struct resource veu_resources[] = {
+	[0] = {
+		.name	= "VEU",
+		.start	= 0xfe920000,
+		.end	= 0xfe9200b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu_platform_data,
+	},
+	.resource	= veu_resources,
+	.num_resources	= ARRAY_SIZE(veu_resources),
+};
 
 static struct plat_sci_port sci_platform_data[] = {
 	{
@@ -32,16 +130,171 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7343_devices[] __initdata = {
+	&iic0_device,
+	&iic1_device,
 	&sci_device,
+	&vpu_device,
+	&veu_device,
 };
 
 static int __init sh7343_devices_setup(void)
 {
+	clk_always_enable("mstp031"); /* TLB */
+	clk_always_enable("mstp030"); /* IC */
+	clk_always_enable("mstp029"); /* OC */
+	clk_always_enable("mstp028"); /* URAM */
+	clk_always_enable("mstp026"); /* XYMEM */
+	clk_always_enable("mstp023"); /* INTC3 */
+	clk_always_enable("mstp022"); /* INTC */
+	clk_always_enable("mstp020"); /* SuperHyway */
+	clk_always_enable("mstp109"); /* I2C0 */
+	clk_always_enable("mstp108"); /* I2C1 */
+	clk_always_enable("mstp202"); /* VEU */
+	clk_always_enable("mstp201"); /* VPU */
+
+	platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
+	platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+
 	return platform_add_devices(sh7343_devices,
 				    ARRAY_SIZE(sh7343_devices));
 }
 __initcall(sh7343_devices_setup);
 
+enum {
+	UNUSED = 0,
+
+	/* interrupt sources */
+	IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7,
+	DMAC0, DMAC1, DMAC2, DMAC3,
+	VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU,
+	MFI, VPU, TPU, Z3D4, USBI0, USBI1,
+	MMC_ERR, MMC_TRAN, MMC_FSTAT, MMC_FRDY,
+	DMAC4, DMAC5, DMAC_DADERR,
+	KEYSC,
+	SCIF, SCIF1, SCIF2, SCIF3, SCIF4,
+	SIOF0, SIOF1, SIO,
+	FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I,
+	I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI,
+	I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI,
+	SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI,
+	IRDA,
+	SDHI0, SDHI1, SDHI2, SDHI3,
+	CMT, TSIF, SIU,
+	TMU0, TMU1, TMU2,
+	JPU, LCDC,
+
+	/* interrupt groups */
+
+	DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C0, I2C1, SIM, SDHI, USB,
+};
+
+static struct intc_vect vectors[] __initdata = {
+	INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620),
+	INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660),
+	INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0),
+	INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0),
+	INTC_VECT(I2C1_ALI, 0x780), INTC_VECT(I2C1_TACKI, 0x7a0),
+	INTC_VECT(I2C1_WAITI, 0x7c0), INTC_VECT(I2C1_DTEI, 0x7e0),
+	INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820),
+	INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860),
+	INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0),
+	INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0),
+	INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980),
+	INTC_VECT(TPU, 0x9a0), INTC_VECT(Z3D4, 0x9e0),
+	INTC_VECT(USBI0, 0xa20), INTC_VECT(USBI1, 0xa40),
+	INTC_VECT(MMC_ERR, 0xb00), INTC_VECT(MMC_TRAN, 0xb20),
+	INTC_VECT(MMC_FSTAT, 0xb40), INTC_VECT(MMC_FRDY, 0xb60),
+	INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0),
+	INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0),
+	INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIF1, 0xc20),
+	INTC_VECT(SCIF2, 0xc40), INTC_VECT(SCIF3, 0xc60),
+	INTC_VECT(SIOF0, 0xc80), INTC_VECT(SIOF1, 0xca0),
+	INTC_VECT(SIO, 0xd00),
+	INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0),
+	INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0),
+	INTC_VECT(I2C0_ALI, 0xe00), INTC_VECT(I2C0_TACKI, 0xe20),
+	INTC_VECT(I2C0_WAITI, 0xe40), INTC_VECT(I2C0_DTEI, 0xe60),
+	INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0),
+	INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0),
+	INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20),
+	INTC_VECT(SIU, 0xf80),
+	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
+	INTC_VECT(TMU2, 0x440),
+	INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580),
+};
+
+static struct intc_group groups[] __initdata = {
+	INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3),
+	INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU),
+	INTC_GROUP(MMC, MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR),
+	INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR),
+	INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI,
+		   FLCTL_FLTREQ0I, FLCTL_FLTREQ1I),
+	INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI),
+	INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI),
+	INTC_GROUP(SIM, SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI),
+	INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3),
+	INTC_GROUP(USB, USBI0, USBI1),
+};
+
+static struct intc_mask_reg mask_registers[] __initdata = {
+	{ 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */
+	  { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } },
+	{ 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */
+	  { 0, 0, 0, VPU, 0, 0, 0, MFI } },
+	{ 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */
+	  { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } },
+	{ 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */
+	  { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } },
+	{ 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */
+	  { KEYSC, DMAC_DADERR, DMAC5, DMAC4, SCIF3, SCIF2, SCIF1, SCIF } },
+	{ 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */
+	  { 0, 0, 0, SIO, Z3D4, 0, SIOF1, SIOF0 } },
+	{ 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */
+	  { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI,
+	    FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } },
+	{ 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */
+	  { SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } },
+	{ 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */
+	  { 0, 0, 0, CMT, 0, USBI1, USBI0 } },
+	{ 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */
+	  { MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR } },
+	{ 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */
+	  { I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI, TPU, 0, 0, TSIF } },
+	{ 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_prio_reg prio_registers[] __initdata = {
+	{ 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } },
+	{ 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } },
+	{ 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } },
+	{ 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } },
+	{ 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIF1, SCIF2, SCIF3 } },
+	{ 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C0 } },
+	{ 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, I2C1 } },
+	{ 0xa4080024, 0, 16, 4, /* IPRJ */ { Z3D4, 0, SIU } },
+	{ 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } },
+	{ 0xa408002c, 0, 16, 4, /* IPRL */ { 0, 0, TPU } },
+	{ 0xa4140010, 0, 32, 4, /* INTPRI00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_sense_reg sense_registers[] __initdata = {
+	{ 0xa414001c, 16, 2, /* ICR1 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7343", vectors, groups,
+			     mask_registers, prio_registers, sense_registers,
+			     ack_registers);
+
 void __init plat_irq_setup(void)
 {
+	register_intc_controller(&intc_desc);
 }
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
index f26b5cdad0d1..6851dba02f31 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c
@@ -13,6 +13,112 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
+
+static struct resource iic_resources[] = {
+	[0] = {
+		.name	= "IIC",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.end    = 99,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic_resources),
+	.resource       = iic_resources,
+};
+
+static struct uio_info vpu_platform_data = {
+	.name = "VPU5",
+	.version = "0",
+	.irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe902807,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu0_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 54,
+};
+
+static struct resource veu0_resources[] = {
+	[0] = {
+		.name	= "VEU(1)",
+		.start	= 0xfe920000,
+		.end	= 0xfe9200b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu0_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu0_platform_data,
+	},
+	.resource	= veu0_resources,
+	.num_resources	= ARRAY_SIZE(veu0_resources),
+};
+
+static struct uio_info veu1_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 27,
+};
+
+static struct resource veu1_resources[] = {
+	[0] = {
+		.name	= "VEU(2)",
+		.start	= 0xfe924000,
+		.end	= 0xfe9240b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu1_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &veu1_platform_data,
+	},
+	.resource	= veu1_resources,
+	.num_resources	= ARRAY_SIZE(veu1_resources),
+};
 
 static struct plat_sci_port sci_platform_data[] = {
 	{
@@ -34,11 +140,32 @@ static struct platform_device sci_device = {
 };
 
 static struct platform_device *sh7366_devices[] __initdata = {
+	&iic_device,
 	&sci_device,
+	&vpu_device,
+	&veu0_device,
+	&veu1_device,
 };
 
 static int __init sh7366_devices_setup(void)
 {
+	clk_always_enable("mstp031"); /* TLB */
+	clk_always_enable("mstp030"); /* IC */
+	clk_always_enable("mstp029"); /* OC */
+	clk_always_enable("mstp028"); /* RSMEM */
+	clk_always_enable("mstp026"); /* XYMEM */
+	clk_always_enable("mstp023"); /* INTC3 */
+	clk_always_enable("mstp022"); /* INTC */
+	clk_always_enable("mstp020"); /* SuperHyway */
+	clk_always_enable("mstp109"); /* I2C */
+	clk_always_enable("mstp207"); /* VEU-2 */
+	clk_always_enable("mstp202"); /* VEU-1 */
+	clk_always_enable("mstp201"); /* VPU */
+
+	platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+	platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+	platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+
 	return platform_add_devices(sh7366_devices,
 				    ARRAY_SIZE(sh7366_devices));
 }
@@ -97,7 +224,7 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(SIU, 0xf80),
 	INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420),
 	INTC_VECT(TMU2, 0x440),
-	INTC_VECT(VEU2, 0x580), INTC_VECT(LCDC, 0x580),
+	INTC_VECT(VEU2, 0x560), INTC_VECT(LCDC, 0x580),
 };
 
 static struct intc_group groups[] __initdata = {
@@ -163,8 +290,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
 	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7366", vectors, groups,
-			 mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7366", vectors, groups,
+			     mask_registers, prio_registers, sense_registers,
+			     ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 62ebccf18b3c..de1ede92176e 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -12,6 +12,8 @@
 #include <linux/serial.h>
 #include <linux/serial_sci.h>
 #include <linux/mm.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
 #include <asm/mmzone.h>
 
 static struct resource usbf_resources[] = {
@@ -59,6 +61,62 @@ static struct platform_device iic_device = {
 	.resource       = iic_resources,
 };
 
+static struct uio_info vpu_platform_data = {
+	.name = "VPU4",
+	.version = "0",
+	.irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe9022eb,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 54,
+};
+
+static struct resource veu_resources[] = {
+	[0] = {
+		.name	= "VEU",
+		.start	= 0xfe920000,
+		.end	= 0xfe9200b7,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu_platform_data,
+	},
+	.resource	= veu_resources,
+	.num_resources	= ARRAY_SIZE(veu_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffe00000,
@@ -95,10 +153,27 @@ static struct platform_device *sh7722_devices[] __initdata = {
 	&usbf_device,
 	&iic_device,
 	&sci_device,
+	&vpu_device,
+	&veu_device,
 };
 
 static int __init sh7722_devices_setup(void)
 {
+	clk_always_enable("mstp031"); /* TLB */
+	clk_always_enable("mstp030"); /* IC */
+	clk_always_enable("mstp029"); /* OC */
+	clk_always_enable("mstp028"); /* URAM */
+	clk_always_enable("mstp026"); /* XYMEM */
+	clk_always_enable("mstp022"); /* INTC */
+	clk_always_enable("mstp020"); /* SuperHyway */
+	clk_always_enable("mstp109"); /* I2C */
+	clk_always_enable("mstp211"); /* USB */
+	clk_always_enable("mstp202"); /* VEU */
+	clk_always_enable("mstp201"); /* VPU */
+
+	platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20);
+	platform_resource_setup_memory(&veu_device, "veu", 2 << 20);
+
 	return platform_add_devices(sh7722_devices,
 				    ARRAY_SIZE(sh7722_devices));
 }
@@ -229,8 +304,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
 	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7722", vectors, groups,
-			 mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7722", vectors, groups,
+			     mask_registers, prio_registers, sense_registers,
+			     ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index a0470f2f5479..cd6baffdc896 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -12,8 +12,94 @@
 #include <linux/serial.h>
 #include <linux/mm.h>
 #include <linux/serial_sci.h>
+#include <linux/uio_driver.h>
+#include <asm/clock.h>
 #include <asm/mmzone.h>
 
+static struct uio_info vpu_platform_data = {
+	.name = "VPU5",
+	.version = "0",
+	.irq = 60,
+};
+
+static struct resource vpu_resources[] = {
+	[0] = {
+		.name	= "VPU",
+		.start	= 0xfe900000,
+		.end	= 0xfe902807,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device vpu_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &vpu_platform_data,
+	},
+	.resource	= vpu_resources,
+	.num_resources	= ARRAY_SIZE(vpu_resources),
+};
+
+static struct uio_info veu0_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 54,
+};
+
+static struct resource veu0_resources[] = {
+	[0] = {
+		.name	= "VEU2H0",
+		.start	= 0xfe920000,
+		.end	= 0xfe92027b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu0_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &veu0_platform_data,
+	},
+	.resource	= veu0_resources,
+	.num_resources	= ARRAY_SIZE(veu0_resources),
+};
+
+static struct uio_info veu1_platform_data = {
+	.name = "VEU",
+	.version = "0",
+	.irq = 27,
+};
+
+static struct resource veu1_resources[] = {
+	[0] = {
+		.name	= "VEU2H1",
+		.start	= 0xfe924000,
+		.end	= 0xfe92427b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* place holder for contiguous memory */
+	},
+};
+
+static struct platform_device veu1_device = {
+	.name		= "uio_pdrv_genirq",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &veu1_platform_data,
+	},
+	.resource	= veu1_resources,
+	.num_resources	= ARRAY_SIZE(veu1_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase        = 0xffe00000,
@@ -113,14 +199,56 @@ static struct platform_device sh7723_usb_host_device = {
 	.resource	= sh7723_usb_host_resources,
 };
 
+static struct resource iic_resources[] = {
+	[0] = {
+		.name	= "IIC",
+		.start  = 0x04470000,
+		.end    = 0x04470017,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 96,
+		.end    = 99,
+		.flags  = IORESOURCE_IRQ,
+       },
+};
+
+static struct platform_device iic_device = {
+	.name           = "i2c-sh_mobile",
+	.num_resources  = ARRAY_SIZE(iic_resources),
+	.resource       = iic_resources,
+};
+
 static struct platform_device *sh7723_devices[] __initdata = {
 	&sci_device,
 	&rtc_device,
+	&iic_device,
 	&sh7723_usb_host_device,
+	&vpu_device,
+	&veu0_device,
+	&veu1_device,
 };
 
 static int __init sh7723_devices_setup(void)
 {
+	clk_always_enable("mstp031"); /* TLB */
+	clk_always_enable("mstp030"); /* IC */
+	clk_always_enable("mstp029"); /* OC */
+	clk_always_enable("mstp024"); /* FPU */
+	clk_always_enable("mstp022"); /* INTC */
+	clk_always_enable("mstp020"); /* SuperHyway */
+	clk_always_enable("mstp000"); /* MERAM */
+	clk_always_enable("mstp109"); /* I2C */
+	clk_always_enable("mstp108"); /* RTC */
+	clk_always_enable("mstp211"); /* USB */
+	clk_always_enable("mstp206"); /* VEU2H1 */
+	clk_always_enable("mstp202"); /* VEU2H0 */
+	clk_always_enable("mstp201"); /* VPU */
+
+	platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20);
+	platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20);
+	platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20);
+
 	return platform_add_devices(sh7723_devices,
 				    ARRAY_SIZE(sh7723_devices));
 }
@@ -326,8 +454,14 @@ static struct intc_sense_reg sense_registers[] __initdata = {
 	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc, "sh7723", vectors, groups,
-			 mask_registers, prio_registers, sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xa4140024, 0, 8, /* INTREQ00 */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc, "sh7723", vectors, groups,
+			     mask_registers, prio_registers, sense_registers,
+			     ack_registers);
 
 void __init plat_irq_setup(void)
 {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index f189a559462b..3c5b629887a8 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -3,6 +3,7 @@
  *
  *  Copyright (C) 2006  Paul Mundt
  *  Copyright (C) 2007  Yoshihiro Shimoda
+ *  Copyright (C) 2008  Nobuhiro Iwamatsu
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -56,6 +57,11 @@ static struct plat_sci_port sci_platform_data[] = {
 		.type		= PORT_SCIF,
 		.irqs		= { 76, 77, 79, 78 },
 	}, {
+		.mapbase	= 0xffe10000,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.type		= PORT_SCIF,
+		.irqs		= { 104, 105, 107, 106 },
+	}, {
 		.flags = 0,
 	}
 };
@@ -208,8 +214,8 @@ static struct intc_vect vectors[] __initdata = {
 	INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60),
 	INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0),
 	INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0),
-	INTC_VECT(SCIF1_ERI, 0xf00), INTC_VECT(SCIF1_RXI, 0xf20),
-	INTC_VECT(SCIF1_BRI, 0xf40), INTC_VECT(SCIF1_TXI, 0xf60),
+	INTC_VECT(SCIF2_ERI, 0xf00), INTC_VECT(SCIF2_RXI, 0xf20),
+	INTC_VECT(SCIF2_BRI, 0xf40), INTC_VECT(SCIF2_TXI, 0xf60),
 	INTC_VECT(GPIO_CH0, 0xf80), INTC_VECT(GPIO_CH1, 0xfa0),
 	INTC_VECT(GPIO_CH2, 0xfc0), INTC_VECT(GPIO_CH3, 0xfe0),
 };
@@ -290,9 +296,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = {
 					    IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors,
-			NULL, irq_mask_registers, irq_prio_registers,
-			irq_sense_registers);
+static struct intc_mask_reg irq_ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7763-irq", irq_vectors,
+			     NULL, irq_mask_registers, irq_prio_registers,
+			     irq_sense_registers, irq_ack_registers);
 
 
 /* External interrupt pins in IRL mode */
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 18dbbe23fea1..fb8200cc7440 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -217,9 +217,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = {
 					    IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_irq_desc, "sh7780-irq", irq_vectors,
-			 NULL, irq_mask_registers, irq_prio_registers,
-			 irq_sense_registers);
+static struct intc_mask_reg irq_ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7780-irq", irq_vectors,
+			     NULL, irq_mask_registers, irq_prio_registers,
+			     irq_sense_registers, irq_ack_registers);
 
 /* External interrupt pins in IRL mode */
 
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
index 621e7329ec63..30baa63b24c8 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
@@ -238,13 +238,18 @@ static struct intc_sense_reg sense_registers[] __initdata = {
 					    IRQ4, IRQ5, IRQ6, IRQ7 } },
 };
 
-static DECLARE_INTC_DESC(intc_desc_irq0123, "sh7785-irq0123", vectors_irq0123,
-			 NULL, mask_registers, prio_registers,
-			 sense_registers);
+static struct intc_mask_reg ack_registers[] __initdata = {
+	{ 0xffd00024, 0, 32, /* INTREQ */
+	  { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } },
+};
+
+static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7785-irq0123",
+			     vectors_irq0123, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
 
-static DECLARE_INTC_DESC(intc_desc_irq4567, "sh7785-irq4567", vectors_irq4567,
-			 NULL, mask_registers, prio_registers,
-			 sense_registers);
+static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7785-irq4567",
+			     vectors_irq4567, NULL, mask_registers,
+			     prio_registers, sense_registers, ack_registers);
 
 /* External interrupt pins in IRL mode */
 
diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S
index 05372ed6c568..04c7da968146 100644
--- a/arch/sh/kernel/cpu/sh5/entry.S
+++ b/arch/sh/kernel/cpu/sh5/entry.S
@@ -11,7 +11,7 @@
  */
 #include <linux/errno.h>
 #include <linux/sys.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 #include <asm/processor.h>
 #include <asm/unistd.h>
 #include <asm/thread_info.h>
@@ -987,11 +987,11 @@ work_resched:
 work_notifysig:
 	gettr	tr1, LINK
 
-	movi	do_signal, r6
+	movi	do_notify_resume, r6
 	ptabs	r6, tr0
 	or	SP, ZERO, r2
-	or	ZERO, ZERO, r3
-	blink	tr0, LINK	    /* Call do_signal(regs, 0), return here */
+	or	r7, ZERO, r3
+	blink	tr0, LINK	    /* Call do_notify_resume(regs, current_thread_info->flags), return here */
 
 restore_all:
 	/* Do prefetches */
@@ -1300,18 +1300,20 @@ syscall_allowed:
 
 	getcon	KCR0, r2
 	ld.l	r2, TI_FLAGS, r4
-	movi	(_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | _TIF_SYSCALL_AUDIT), r6
+	movi	_TIF_WORK_SYSCALL_MASK, r6
 	and	r6, r4, r6
 	beq/l	r6, ZERO, tr0
 
 	/* Trace it by calling syscall_trace before and after */
-	movi	syscall_trace, r4
+	movi	do_syscall_trace_enter, r4
 	or	SP, ZERO, r2
-	or	ZERO, ZERO, r3
 	ptabs	r4, tr0
 	blink	tr0, LINK
 
-	/* Reload syscall number as r5 is trashed by syscall_trace */
+	/* Save the retval */
+	st.q	SP, FRAME_R(2), r2
+
+	/* Reload syscall number as r5 is trashed by do_syscall_trace_enter */
 	ld.q	SP, FRAME_S(FSYSCALL_ID), r5
 	andi	r5, 0x1ff, r5
 
@@ -1343,9 +1345,8 @@ syscall_ret_trace:
 	/* We get back here only if under trace */
 	st.q	SP, FRAME_R(9), r2	/* Save return value */
 
-	movi	syscall_trace, LINK
+	movi	do_syscall_trace_leave, LINK
 	or	SP, ZERO, r2
-	movi	1, r3
 	ptabs	LINK, tr0
 	blink	tr0, LINK
 
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 718bd2356b34..0bc17def55a7 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -192,7 +192,7 @@ work_resched:
 	.align	2
 1:	.long	schedule
 2:	.long	do_notify_resume
-3:	.long	restore_all
+3:	.long	resume_userspace
 #ifdef CONFIG_TRACE_IRQFLAGS
 4:	.long	trace_hardirqs_on
 5:	.long	trace_hardirqs_off
@@ -202,7 +202,7 @@ work_resched:
 syscall_exit_work:
 	! r0: current_thread_info->flags
 	! r8: current_thread_info
-	tst	#_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | _TIF_SYSCALL_AUDIT, r0
+	tst	#_TIF_WORK_SYSCALL_MASK, r0
 	bt/s	work_pending
 	 tst	#_TIF_NEED_RESCHED, r0
 #ifdef CONFIG_TRACE_IRQFLAGS
@@ -211,10 +211,8 @@ syscall_exit_work:
 	 nop
 #endif
 	sti
-	! XXX setup arguments...
 	mov	r15, r4
-	mov	#1, r5
-	mov.l	4f, r0			! do_syscall_trace
+	mov.l	8f, r0			! do_syscall_trace_leave
 	jsr	@r0
 	 nop
 	bra	resume_userspace
@@ -223,12 +221,11 @@ syscall_exit_work:
 	.align	2
 syscall_trace_entry:
 	!                     	Yes it is traced.
-	! XXX setup arguments...
 	mov     r15, r4
-	mov     #0, r5
-	mov.l	4f, r11		! Call do_syscall_trace which notifies
+	mov.l	7f, r11		! Call do_syscall_trace_enter which notifies
 	jsr	@r11	    	! superior (will chomp R[0-7])
 	 nop
+	mov.l	r0, @(OFF_R0,r15)	! Save return value
 	!			Reload R0-R4 from kernel stack, where the
 	!   	    	    	parent may have modified them using
 	!   	    	    	ptrace(POKEUSR).  (Note that R0-R2 are
@@ -351,7 +348,7 @@ ENTRY(system_call)
 	!
 	get_current_thread_info r8, r10
 	mov.l	@(TI_FLAGS,r8), r8
-	mov	#(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT), r10
+	mov	#_TIF_WORK_SYSCALL_MASK, r10
 	tst	r10, r8
 	bf	syscall_trace_entry
 	!
@@ -389,8 +386,9 @@ syscall_exit:
 #endif
 2:	.long	NR_syscalls
 3:	.long	sys_call_table
-4:	.long	do_syscall_trace
 #ifdef CONFIG_TRACE_IRQFLAGS
 5:	.long	trace_hardirqs_on
 6:	.long	trace_hardirqs_off
 #endif
+7:	.long	do_syscall_trace_enter
+8:	.long	do_syscall_trace_leave
diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S
index f42d4c0feb76..7ccfb995a398 100644
--- a/arch/sh/kernel/head_64.S
+++ b/arch/sh/kernel/head_64.S
@@ -11,8 +11,8 @@
 #include <asm/page.h>
 #include <asm/cache.h>
 #include <asm/tlb.h>
-#include <asm/cpu/registers.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/registers.h>
+#include <cpu/mmu_context.h>
 #include <asm/thread_info.h>
 
 /*
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index a2a99e487e33..64b7690c664c 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -15,7 +15,7 @@
 #include <asm/machvec.h>
 #include <asm/uaccess.h>
 #include <asm/thread_info.h>
-#include <asm/cpu/mmu_context.h>
+#include <cpu/mmu_context.h>
 
 atomic_t irq_err_count;
 
diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c
index 5c17de51987e..4703dff174d5 100644
--- a/arch/sh/kernel/machine_kexec.c
+++ b/arch/sh/kernel/machine_kexec.c
@@ -13,6 +13,7 @@
 #include <linux/kexec.h>
 #include <linux/delay.h>
 #include <linux/reboot.h>
+#include <linux/numa.h>
 #include <asm/pgtable.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
@@ -70,7 +71,7 @@ static void kexec_info(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 
 	unsigned long page_list;
@@ -104,3 +105,10 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	(*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg);
 }
 
+void arch_crash_save_vmcoreinfo(void)
+{
+#ifdef CONFIG_NUMA
+	VMCOREINFO_SYMBOL(node_data);
+	VMCOREINFO_LENGTH(node_data, MAX_NUMNODES);
+#endif
+}
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
index 5482e65375a9..c43081039dd5 100644
--- a/arch/sh/kernel/module.c
+++ b/arch/sh/kernel/module.c
@@ -27,6 +27,7 @@
 #include <linux/moduleloader.h>
 #include <linux/elf.h>
 #include <linux/vmalloc.h>
+#include <linux/bug.h>
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
@@ -36,7 +37,8 @@ void *module_alloc(unsigned long size)
 {
 	if (size == 0)
 		return NULL;
-	return vmalloc(size);
+
+	return vmalloc_exec(size);
 }
 
 
@@ -145,9 +147,10 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    const Elf_Shdr *sechdrs,
 		    struct module *me)
 {
-	return 0;
+	return module_bug_finalize(hdr, sechdrs, me);
 }
 
 void module_arch_cleanup(struct module *mod)
 {
+	module_bug_cleanup(mod);
 }
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index b98e37a1f54c..3326a45749d9 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -34,18 +34,6 @@ void (*pm_idle)(void);
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
-void disable_hlt(void)
-{
-	hlt_counter++;
-}
-EXPORT_SYMBOL(disable_hlt);
-
-void enable_hlt(void)
-{
-	hlt_counter--;
-}
-EXPORT_SYMBOL(enable_hlt);
-
 static int __init nohlt_setup(char *__unused)
 {
 	hlt_counter = 1;
@@ -60,7 +48,7 @@ static int __init hlt_setup(char *__unused)
 }
 __setup("hlt", hlt_setup);
 
-void default_idle(void)
+static void default_idle(void)
 {
 	if (!hlt_counter) {
 		clear_thread_flag(TIF_POLLING_NRFLAG);
@@ -86,7 +74,7 @@ void cpu_idle(void)
 		if (!idle)
 			idle = default_idle;
 
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched())
 			idle();
 		tick_nohz_restart_sched_tick();
diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c
index 0283d8133075..b9dbd2d3b4a5 100644
--- a/arch/sh/kernel/process_64.c
+++ b/arch/sh/kernel/process_64.c
@@ -36,16 +36,6 @@ static int hlt_counter = 1;
 
 #define HARD_IDLE_TIMEOUT (HZ / 3)
 
-void disable_hlt(void)
-{
-	hlt_counter++;
-}
-
-void enable_hlt(void)
-{
-	hlt_counter--;
-}
-
 static int __init nohlt_setup(char *__unused)
 {
 	hlt_counter = 1;
diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c
index fddb547f3c2b..035cb300d3dc 100644
--- a/arch/sh/kernel/ptrace_32.c
+++ b/arch/sh/kernel/ptrace_32.c
@@ -20,6 +20,8 @@
 #include <linux/signal.h>
 #include <linux/io.h>
 #include <linux/audit.h>
+#include <linux/seccomp.h>
+#include <linux/tracehook.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -57,7 +59,23 @@ static inline int put_stack_long(struct task_struct *task, int offset,
 	return 0;
 }
 
-static void ptrace_disable_singlestep(struct task_struct *child)
+void user_enable_single_step(struct task_struct *child)
+{
+	struct pt_regs *regs = task_pt_regs(child);
+	long pc;
+
+	pc = get_stack_long(child, (long)&regs->pc);
+
+	/* Next scheduling will set up UBC */
+	if (child->thread.ubc_pc == 0)
+		ubc_usercnt += 1;
+
+	child->thread.ubc_pc = pc;
+
+	set_tsk_thread_flag(child, TIF_SINGLESTEP);
+}
+
+void user_disable_single_step(struct task_struct *child)
 {
 	clear_tsk_thread_flag(child, TIF_SINGLESTEP);
 
@@ -81,7 +99,7 @@ static void ptrace_disable_singlestep(struct task_struct *child)
  */
 void ptrace_disable(struct task_struct *child)
 {
-	ptrace_disable_singlestep(child);
+	user_disable_single_step(child);
 }
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
@@ -90,12 +108,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	int ret;
 
 	switch (request) {
-	/* when I and D space are separate, these will need to be fixed. */
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		ret = generic_ptrace_peekdata(child, addr, data);
-		break;
-
 	/* read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR: {
 		unsigned long tmp;
@@ -125,12 +137,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 
-	/* when I and D space are separate, this will have to be fixed. */
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = generic_ptrace_pokedata(child, addr, data);
-		break;
-
 	case PTRACE_POKEUSR: /* write the word at location addr in the USER area */
 		ret = -EIO;
 		if ((addr & 3) || addr < 0 ||
@@ -151,67 +157,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 		break;
 
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT: { /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-		ptrace_disable_singlestep(child);
-
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-/*
- * make the child exit.  Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to
- * exit.
- */
-	case PTRACE_KILL: {
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		ptrace_disable_singlestep(child);
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-	}
-
-	case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-		long pc;
-		struct pt_regs *regs = NULL;
-
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		if ((child->ptrace & PT_DTRACE) == 0) {
-			/* Spurious delayed TF traps may occur */
-			child->ptrace |= PT_DTRACE;
-		}
-
-		pc = get_stack_long(child, (long)&regs->pc);
-
-		/* Next scheduling will set up UBC */
-		if (child->thread.ubc_pc == 0)
-			ubc_usercnt += 1;
-		child->thread.ubc_pc = pc;
-
-		set_tsk_thread_flag(child, TIF_SINGLESTEP);
-		child->exit_code = data;
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
 #ifdef CONFIG_SH_DSP
 	case PTRACE_GETDSPREGS: {
 		unsigned long dp;
@@ -241,6 +186,29 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 #endif
+#ifdef CONFIG_BINFMT_ELF_FDPIC
+	case PTRACE_GETFDPIC: {
+		unsigned long tmp = 0;
+
+		switch (addr) {
+		case PTRACE_GETFDPIC_EXEC:
+			tmp = child->mm->context.exec_fdpic_loadmap;
+			break;
+		case PTRACE_GETFDPIC_INTERP:
+			tmp = child->mm->context.interp_fdpic_loadmap;
+			break;
+		default:
+			break;
+		}
+
+		ret = 0;
+		if (put_user(tmp, (unsigned long *) data)) {
+			ret = -EFAULT;
+			break;
+		}
+		break;
+	}
+#endif
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
@@ -249,39 +217,49 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
+static inline int audit_arch(void)
 {
-	struct task_struct *tsk = current;
+	int arch = EM_SH;
 
-	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]),
-				   regs->regs[0]);
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	arch |= __AUDIT_ARCH_LE;
+#endif
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    !test_thread_flag(TIF_SINGLESTEP))
-		goto out;
-	if (!(tsk->ptrace & PT_PTRACED))
-		goto out;
+	return arch;
+}
 
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) &&
-				 !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0));
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
+{
+	long ret = 0;
 
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (tsk->exit_code) {
-		send_sig(tsk->exit_code, tsk, 1);
-		tsk->exit_code = 0;
-	}
+	secure_computing(regs->regs[0]);
 
-out:
-	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[3],
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->regs[0].
+		 */
+		ret = -1L;
+
+	if (unlikely(current->audit_context))
+		audit_syscall_entry(audit_arch(), regs->regs[3],
 				    regs->regs[4], regs->regs[5],
 				    regs->regs[6], regs->regs[7]);
 
+	return ret ?: regs->regs[0];
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	int step;
+
+	if (unlikely(current->audit_context))
+		audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]),
+				   regs->regs[0]);
+
+	step = test_thread_flag(TIF_SINGLESTEP);
+	if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, step);
 }
diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c
index d453c47dc522..5922edd416db 100644
--- a/arch/sh/kernel/ptrace_64.c
+++ b/arch/sh/kernel/ptrace_64.c
@@ -27,6 +27,8 @@
 #include <linux/signal.h>
 #include <linux/syscalls.h>
 #include <linux/audit.h>
+#include <linux/seccomp.h>
+#include <linux/tracehook.h>
 #include <asm/io.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -120,18 +122,23 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data)
 	return 0;
 }
 
+void user_enable_single_step(struct task_struct *child)
+{
+	struct pt_regs *regs = child->thread.uregs;
+
+	regs->sr |= SR_SSTEP;	/* auto-resetting upon exception */
+}
+
+void user_disable_single_step(struct task_struct *child)
+{
+	regs->sr &= ~SR_SSTEP;
+}
 
 long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 {
 	int ret;
 
 	switch (request) {
-	/* when I and D space are separate, these will need to be fixed. */
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		ret = generic_ptrace_peekdata(child, addr, data);
-		break;
-
 	/* read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR: {
 		unsigned long tmp;
@@ -154,12 +161,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		break;
 	}
 
-	/* when I and D space are separate, this will have to be fixed. */
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		ret = generic_ptrace_pokedata(child, addr, data);
-		break;
-
 	case PTRACE_POKEUSR:
                 /* write the word at location addr in the USER area. We must
                    disallow any changes to certain SR bits or u_fpvalid, since
@@ -191,58 +192,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 		}
 		break;
 
-	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
-	case PTRACE_CONT: { /* restart after signal. */
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		child->exit_code = data;
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
-/*
- * make the child exit.  Best I can do is send it a sigkill.
- * perhaps it should be put in the status that it wants to
- * exit.
- */
-	case PTRACE_KILL: {
-		ret = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-	}
-
-	case PTRACE_SINGLESTEP: {  /* set the trap flag. */
-		struct pt_regs *regs;
-
-		ret = -EIO;
-		if (!valid_signal(data))
-			break;
-		clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		if ((child->ptrace & PT_DTRACE) == 0) {
-			/* Spurious delayed TF traps may occur */
-			child->ptrace |= PT_DTRACE;
-		}
-
-		regs = child->thread.uregs;
-
-		regs->sr |= SR_SSTEP;	/* auto-resetting upon exception */
-
-		child->exit_code = data;
-		/* give it a chance to run. */
-		wake_up_process(child);
-		ret = 0;
-		break;
-	}
-
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
@@ -273,38 +222,51 @@ asmlinkage int sh64_ptrace(long request, long pid, long addr, long data)
 	return sys_ptrace(request, pid, addr, data);
 }
 
-asmlinkage void syscall_trace(struct pt_regs *regs, int entryexit)
+static inline int audit_arch(void)
 {
-	struct task_struct *tsk = current;
+	int arch = EM_SH;
 
-	if (unlikely(current->audit_context) && entryexit)
-		audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]),
-				   regs->regs[9]);
+#ifdef CONFIG_64BIT
+	arch |= __AUDIT_ARCH_64BIT;
+#endif
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+	arch |= __AUDIT_ARCH_LE;
+#endif
 
-	if (!test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    !test_thread_flag(TIF_SINGLESTEP))
-		goto out;
-	if (!(tsk->ptrace & PT_PTRACED))
-		goto out;
-
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) &&
-				!test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (tsk->exit_code) {
-		send_sig(tsk->exit_code, tsk, 1);
-		tsk->exit_code = 0;
-	}
+	return arch;
+}
 
-out:
-	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[1],
+asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs)
+{
+	long long ret = 0;
+
+	secure_computing(regs->regs[9]);
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+	    tracehook_report_syscall_entry(regs))
+		/*
+		 * Tracing decided this syscall should not happen.
+		 * We'll return a bogus call number to get an ENOSYS
+		 * error, but leave the original number in regs->regs[0].
+		 */
+		ret = -1LL;
+
+	if (unlikely(current->audit_context))
+		audit_syscall_entry(audit_arch(), regs->regs[1],
 				    regs->regs[2], regs->regs[3],
 				    regs->regs[4], regs->regs[5]);
+
+	return ret ?: regs->regs[9];
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+	if (unlikely(current->audit_context))
+		audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]),
+				   regs->regs[9]);
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
+		tracehook_report_syscall_exit(regs, 0);
 }
 
 /* Called with interrupts disabled */
@@ -338,5 +300,5 @@ asmlinkage void do_software_break_point(unsigned long long vec,
  */
 void ptrace_disable(struct task_struct *child)
 {
-        /* nothing to do.. */
+	user_disable_single_step(child);
 }
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index bca2bbc575db..a35207655e7b 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -25,6 +25,7 @@
 #include <linux/smp.h>
 #include <linux/err.h>
 #include <linux/debugfs.h>
+#include <linux/crash_dump.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/page.h>
@@ -286,6 +287,25 @@ static void __init setup_memory(void)
 extern void __init setup_memory(void);
 #endif
 
+/*
+ * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by
+ * is_kdump_kernel() to determine if we are booting after a panic. Hence
+ * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE.
+ */
+#ifdef CONFIG_CRASH_DUMP
+/* elfcorehdr= specifies the location of elf core header
+ * stored by the crashed kernel.
+ */
+static int __init parse_elfcorehdr(char *arg)
+{
+	if (!arg)
+		return -EINVAL;
+	elfcorehdr_addr = memparse(arg, &arg);
+	return 0;
+}
+early_param("elfcorehdr", parse_elfcorehdr);
+#endif
+
 void __init setup_arch(char **cmdline_p)
 {
 	enable_mmu();
@@ -398,6 +418,7 @@ const char *get_cpu_subtype(struct sh_cpuinfo *c)
 {
 	return cpu_name[c->type];
 }
+EXPORT_SYMBOL(get_cpu_subtype);
 
 #ifdef CONFIG_PROC_FS
 /* Symbolic CPU flags, keep in sync with asm/cpu-features.h */
@@ -452,6 +473,12 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 	seq_printf(m, "processor\t: %d\n", cpu);
 	seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
 	seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c));
+	if (c->cut_major == -1)
+		seq_printf(m, "cut\t\t: unknown\n");
+	else if (c->cut_minor == -1)
+		seq_printf(m, "cut\t\t: %d.x\n", c->cut_major);
+	else
+		seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor);
 
 	show_cpuflags(m, c);
 
diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c
index f311551d9a05..51689d29ad45 100644
--- a/arch/sh/kernel/signal_32.c
+++ b/arch/sh/kernel/signal_32.c
@@ -24,6 +24,7 @@
 #include <linux/binfmts.h>
 #include <linux/freezer.h>
 #include <linux/io.h>
+#include <linux/tracehook.h>
 #include <asm/system.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
@@ -33,6 +34,11 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
+struct fdpic_func_descriptor {
+	unsigned long	text;
+	unsigned long	GOT;
+};
+
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
  */
@@ -368,6 +374,7 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 		err |= __put_user(OR_R0_R0, &frame->retcode[6]);
 		err |= __put_user((__NR_sigreturn), &frame->retcode[7]);
 		regs->pr = (unsigned long) frame->retcode;
+		flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
 	}
 
 	if (err)
@@ -378,18 +385,21 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 	regs->regs[4] = signal; /* Arg for signal handler */
 	regs->regs[5] = 0;
 	regs->regs[6] = (unsigned long) &frame->sc;
-	regs->pc = (unsigned long) ka->sa.sa_handler;
+
+	if (current->personality & FDPIC_FUNCPTRS) {
+		struct fdpic_func_descriptor __user *funcptr =
+			(struct fdpic_func_descriptor __user *)ka->sa.sa_handler;
+
+		__get_user(regs->pc, &funcptr->text);
+		__get_user(regs->regs[12], &funcptr->GOT);
+	} else
+		regs->pc = (unsigned long)ka->sa.sa_handler;
 
 	set_fs(USER_DS);
 
 	pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
 		 current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
 
-	flush_cache_sigtramp(regs->pr);
-
-	if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode))
-		flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES);
-
 	return 0;
 
 give_sigsegv:
@@ -458,17 +468,22 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	regs->regs[4] = signal; /* Arg for signal handler */
 	regs->regs[5] = (unsigned long) &frame->info;
 	regs->regs[6] = (unsigned long) &frame->uc;
-	regs->pc = (unsigned long) ka->sa.sa_handler;
+
+	if (current->personality & FDPIC_FUNCPTRS) {
+		struct fdpic_func_descriptor __user *funcptr =
+			(struct fdpic_func_descriptor __user *)ka->sa.sa_handler;
+
+		__get_user(regs->pc, &funcptr->text);
+		__get_user(regs->regs[12], &funcptr->GOT);
+	} else
+		regs->pc = (unsigned long)ka->sa.sa_handler;
 
 	set_fs(USER_DS);
 
 	pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
 		 current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
 
-	flush_cache_sigtramp(regs->pr);
-
-	if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode))
-		flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES);
+	flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
 
 	return 0;
 
@@ -493,14 +508,13 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 		switch (regs->regs[0]) {
 			case -ERESTART_RESTARTBLOCK:
 			case -ERESTARTNOHAND:
+			no_system_call_restart:
 				regs->regs[0] = -EINTR;
 				break;
 
 			case -ERESTARTSYS:
-				if (!(ka->sa.sa_flags & SA_RESTART)) {
-					regs->regs[0] = -EINTR;
-					break;
-				}
+				if (!(ka->sa.sa_flags & SA_RESTART))
+					goto no_system_call_restart;
 			/* fallthrough */
 			case -ERESTARTNOINTR:
 				regs->regs[0] = save_r0;
@@ -575,12 +589,15 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
 			 * clear the TIF_RESTORE_SIGMASK flag */
 			if (test_thread_flag(TIF_RESTORE_SIGMASK))
 				clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+			tracehook_signal_handler(signr, &info, &ka, regs,
+					test_thread_flag(TIF_SINGLESTEP));
 		}
 
 		return;
 	}
 
- no_signal:
+no_signal:
 	/* Did we come from a system call? */
 	if (regs->tra >= 0) {
 		/* Restart the system call - no handlers present */
@@ -604,9 +621,14 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0)
 }
 
 asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0,
-				 __u32 thread_info_flags)
+				 unsigned long thread_info_flags)
 {
 	/* deal with pending signal delivery */
-	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs, save_r0);
+
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c
index 552eb810cd85..1d62dfef77f1 100644
--- a/arch/sh/kernel/signal_64.c
+++ b/arch/sh/kernel/signal_64.c
@@ -22,6 +22,7 @@
 #include <linux/ptrace.h>
 #include <linux/unistd.h>
 #include <linux/stddef.h>
+#include <linux/tracehook.h>
 #include <asm/ucontext.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
@@ -42,7 +43,84 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
-asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
+/*
+ * Note that 'init' is a special process: it doesn't get signals it doesn't
+ * want to handle. Thus you cannot kill init even with a SIGKILL even by
+ * mistake.
+ *
+ * Note that we go through the signals twice: once to check the signals that
+ * the kernel can handle, and then we build all the user-level signal handling
+ * stack-frames in one go after that.
+ */
+static int do_signal(struct pt_regs *regs, sigset_t *oldset)
+{
+	siginfo_t info;
+	int signr;
+	struct k_sigaction ka;
+
+	/*
+	 * We want the common case to go fast, which
+	 * is why we may in certain cases get here from
+	 * kernel mode. Just return without doing anything
+	 * if so.
+	 */
+	if (!user_mode(regs))
+		return 1;
+
+	if (try_to_freeze())
+		goto no_signal;
+
+	if (test_thread_flag(TIF_RESTORE_SIGMASK))
+		oldset = &current->saved_sigmask;
+	else if (!oldset)
+		oldset = &current->blocked;
+
+	signr = get_signal_to_deliver(&info, &ka, regs, 0);
+
+	if (signr > 0) {
+		/* Whee!  Actually deliver the signal.  */
+		handle_signal(signr, &info, &ka, oldset, regs);
+
+		/*
+		 * If a signal was successfully delivered, the saved sigmask
+		 * is in its frame, and we can clear the TIF_RESTORE_SIGMASK
+		 * flag.
+		 */
+		if (test_thread_flag(TIF_RESTORE_SIGMASK))
+			clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+		tracehook_signal_handler(signr, &info, &ka, regs, 0);
+		return 1;
+	}
+
+no_signal:
+	/* Did we come from a system call? */
+	if (regs->syscall_nr >= 0) {
+		/* Restart the system call - no handlers present */
+		switch (regs->regs[REG_RET]) {
+		case -ERESTARTNOHAND:
+		case -ERESTARTSYS:
+		case -ERESTARTNOINTR:
+			/* Decode Syscall # */
+			regs->regs[REG_RET] = regs->syscall_nr;
+			regs->pc -= 4;
+			break;
+
+		case -ERESTART_RESTARTBLOCK:
+			regs->regs[REG_RET] = __NR_restart_syscall;
+			regs->pc -= 4;
+			break;
+		}
+	}
+
+	/* No signal to deliver -- put the saved sigmask back */
+	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
+		clear_thread_flag(TIF_RESTORE_SIGMASK);
+		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
+	}
+
+	return 0;
+}
 
 /*
  * Atomically swap in the new signal mask, and wait for a signal.
@@ -643,14 +721,13 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 		switch (regs->regs[REG_RET]) {
 			case -ERESTART_RESTARTBLOCK:
 			case -ERESTARTNOHAND:
+			no_system_call_restart:
 				regs->regs[REG_RET] = -EINTR;
 				break;
 
 			case -ERESTARTSYS:
-				if (!(ka->sa.sa_flags & SA_RESTART)) {
-					regs->regs[REG_RET] = -EINTR;
-					break;
-				}
+				if (!(ka->sa.sa_flags & SA_RESTART))
+					goto no_system_call_restart;
 			/* fallthrough */
 			case -ERESTARTNOINTR:
 				/* Decode syscall # */
@@ -673,80 +750,13 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
 	spin_unlock_irq(&current->sighand->siglock);
 }
 
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-int do_signal(struct pt_regs *regs, sigset_t *oldset)
+asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
 {
-	siginfo_t info;
-	int signr;
-	struct k_sigaction ka;
-
-	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return 1;
-
-	if (try_to_freeze())
-		goto no_signal;
-
-	if (test_thread_flag(TIF_RESTORE_SIGMASK))
-		oldset = &current->saved_sigmask;
-	else if (!oldset)
-		oldset = &current->blocked;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, 0);
-
-	if (signr > 0) {
-		/* Whee!  Actually deliver the signal.  */
-		handle_signal(signr, &info, &ka, oldset, regs);
+	if (thread_info_flags & _TIF_SIGPENDING)
+		do_signal(regs, 0);
 
-		/*
-		 * If a signal was successfully delivered, the saved sigmask
-		 * is in its frame, and we can clear the TIF_RESTORE_SIGMASK
-		 * flag.
-		 */
-		if (test_thread_flag(TIF_RESTORE_SIGMASK))
-			clear_thread_flag(TIF_RESTORE_SIGMASK);
-
-		return 1;
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
 	}
-
-no_signal:
-	/* Did we come from a system call? */
-	if (regs->syscall_nr >= 0) {
-		/* Restart the system call - no handlers present */
-		switch (regs->regs[REG_RET]) {
-		case -ERESTARTNOHAND:
-		case -ERESTARTSYS:
-		case -ERESTARTNOINTR:
-			/* Decode Syscall # */
-			regs->regs[REG_RET] = regs->syscall_nr;
-			regs->pc -= 4;
-			break;
-
-		case -ERESTART_RESTARTBLOCK:
-			regs->regs[REG_RET] = __NR_restart_syscall;
-			regs->pc -= 4;
-			break;
-		}
-	}
-
-	/* No signal to deliver -- put the saved sigmask back */
-	if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
-		clear_thread_flag(TIF_RESTORE_SIGMASK);
-		sigprocmask(SIG_SETMASK, &current->saved_sigmask, NULL);
-	}
-
-	return 0;
 }
diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c
index 5d039d168f57..60c50841143e 100644
--- a/arch/sh/kernel/smp.c
+++ b/arch/sh/kernel/smp.c
@@ -36,13 +36,6 @@ EXPORT_SYMBOL(cpu_possible_map);
 cpumask_t cpu_online_map;
 EXPORT_SYMBOL(cpu_online_map);
 
-static atomic_t cpus_booted = ATOMIC_INIT(0);
-
-/*
- * Run specified function on a particular processor.
- */
-void __smp_call_function(unsigned int cpu);
-
 static inline void __init smp_store_cpu_info(unsigned int cpu)
 {
 	struct sh_cpuinfo *c = cpu_data + cpu;
@@ -175,45 +168,20 @@ static void stop_this_cpu(void *unused)
 
 void smp_send_stop(void)
 {
-	smp_call_function(stop_this_cpu, 0, 1, 0);
+	smp_call_function(stop_this_cpu, 0, 0);
 }
 
-struct smp_fn_call_struct smp_fn_call = {
-	.lock		= __SPIN_LOCK_UNLOCKED(smp_fn_call.lock),
-	.finished	= ATOMIC_INIT(0),
-};
-
-/*
- * The caller of this wants the passed function to run on every cpu.  If wait
- * is set, wait until all cpus have finished the function before returning.
- * The lock is here to protect the call structure.
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-int smp_call_function(void (*func)(void *info), void *info, int retry, int wait)
+void arch_send_call_function_ipi(cpumask_t mask)
 {
-	unsigned int nr_cpus = atomic_read(&cpus_booted);
-	int i;
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	spin_lock(&smp_fn_call.lock);
-
-	atomic_set(&smp_fn_call.finished, 0);
-	smp_fn_call.fn = func;
-	smp_fn_call.data = info;
-
-	for (i = 0; i < nr_cpus; i++)
-		if (i != smp_processor_id())
-			plat_send_ipi(i, SMP_MSG_FUNCTION);
-
-	if (wait)
-		while (atomic_read(&smp_fn_call.finished) != (nr_cpus - 1));
+	int cpu;
 
-	spin_unlock(&smp_fn_call.lock);
+	for_each_cpu_mask(cpu, mask)
+		plat_send_ipi(cpu, SMP_MSG_FUNCTION);
+}
 
-	return 0;
+void arch_send_call_function_single_ipi(int cpu)
+{
+	plat_send_ipi(cpu, SMP_MSG_FUNCTION_SINGLE);
 }
 
 /* Not really SMP stuff ... */
@@ -229,7 +197,7 @@ static void flush_tlb_all_ipi(void *info)
 
 void flush_tlb_all(void)
 {
-	on_each_cpu(flush_tlb_all_ipi, 0, 1, 1);
+	on_each_cpu(flush_tlb_all_ipi, 0, 1);
 }
 
 static void flush_tlb_mm_ipi(void *mm)
@@ -255,7 +223,7 @@ void flush_tlb_mm(struct mm_struct *mm)
 	preempt_disable();
 
 	if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) {
-		smp_call_function(flush_tlb_mm_ipi, (void *)mm, 1, 1);
+		smp_call_function(flush_tlb_mm_ipi, (void *)mm, 1);
 	} else {
 		int i;
 		for (i = 0; i < num_online_cpus(); i++)
@@ -292,7 +260,7 @@ void flush_tlb_range(struct vm_area_struct *vma,
 		fd.vma = vma;
 		fd.addr1 = start;
 		fd.addr2 = end;
-		smp_call_function(flush_tlb_range_ipi, (void *)&fd, 1, 1);
+		smp_call_function(flush_tlb_range_ipi, (void *)&fd, 1);
 	} else {
 		int i;
 		for (i = 0; i < num_online_cpus(); i++)
@@ -316,7 +284,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 
 	fd.addr1 = start;
 	fd.addr2 = end;
-	on_each_cpu(flush_tlb_kernel_range_ipi, (void *)&fd, 1, 1);
+	on_each_cpu(flush_tlb_kernel_range_ipi, (void *)&fd, 1);
 }
 
 static void flush_tlb_page_ipi(void *info)
@@ -335,7 +303,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long page)
 
 		fd.vma = vma;
 		fd.addr1 = page;
-		smp_call_function(flush_tlb_page_ipi, (void *)&fd, 1, 1);
+		smp_call_function(flush_tlb_page_ipi, (void *)&fd, 1);
 	} else {
 		int i;
 		for (i = 0; i < num_online_cpus(); i++)
@@ -359,6 +327,6 @@ void flush_tlb_one(unsigned long asid, unsigned long vaddr)
 	fd.addr1 = asid;
 	fd.addr2 = vaddr;
 
-	smp_call_function(flush_tlb_one_ipi, (void *)&fd, 1, 1);
+	smp_call_function(flush_tlb_one_ipi, (void *)&fd, 1);
 	local_flush_tlb_one(asid, vaddr);
 }
diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c
index 1b2ae35c4a76..54d1f61aa007 100644
--- a/arch/sh/kernel/stacktrace.c
+++ b/arch/sh/kernel/stacktrace.c
@@ -12,6 +12,7 @@
 #include <linux/sched.h>
 #include <linux/stacktrace.h>
 #include <linux/thread_info.h>
+#include <linux/module.h>
 #include <asm/ptrace.h>
 
 /*
diff --git a/arch/sh/kernel/sys_sh32.c b/arch/sh/kernel/sys_sh32.c
index 125e493ead82..f0aa5c398656 100644
--- a/arch/sh/kernel/sys_sh32.c
+++ b/arch/sh/kernel/sys_sh32.c
@@ -29,7 +29,7 @@ asmlinkage int sys_pipe(unsigned long r4, unsigned long r5,
 	int fd[2];
 	int error;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (!error) {
 		regs->regs[1] = fd[1];
 		return fd[0];
diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S
index a46cc3a41148..0af693e65764 100644
--- a/arch/sh/kernel/syscalls_32.S
+++ b/arch/sh/kernel/syscalls_32.S
@@ -343,3 +343,9 @@ ENTRY(sys_call_table)
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index d5d7843aad94..0b436aa3cad7 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -381,3 +381,9 @@ sys_call_table:
 	.long sys_fallocate
 	.long sys_timerfd_settime
 	.long sys_timerfd_gettime
+	.long sys_signalfd4		/* 355 */
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3
+	.long sys_pipe2
+	.long sys_inotify_init1		/* 360 */
diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c
index 7281342c044d..0758b5ee8180 100644
--- a/arch/sh/kernel/time_32.c
+++ b/arch/sh/kernel/time_32.c
@@ -211,7 +211,7 @@ unsigned long sh_hpt_frequency = 0;
 
 #define NSEC_PER_CYC_SHIFT	10
 
-struct clocksource clocksource_sh = {
+static struct clocksource clocksource_sh = {
 	.name		= "SuperH",
 	.rating		= 200,
 	.mask		= CLOCKSOURCE_MASK(32),
diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c
index 022a55f1c1d4..791edabf7d83 100644
--- a/arch/sh/kernel/time_64.c
+++ b/arch/sh/kernel/time_64.c
@@ -33,8 +33,8 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
-#include <asm/cpu/registers.h>	 /* required by inline __asm__ stmt. */
-#include <asm/cpu/irq.h>
+#include <cpu/registers.h>	 /* required by inline __asm__ stmt. */
+#include <cpu/irq.h>
 #include <asm/addrspace.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c
index 8935570008d2..1ca9ad49b541 100644
--- a/arch/sh/kernel/timers/timer-tmu.c
+++ b/arch/sh/kernel/timers/timer-tmu.c
@@ -209,7 +209,7 @@ static int tmu_timer_init(void)
 	return 0;
 }
 
-struct sys_timer_ops tmu_timer_ops = {
+static struct sys_timer_ops tmu_timer_ops = {
 	.init		= tmu_timer_init,
 	.start		= tmu_timer_start,
 	.stop		= tmu_timer_stop,
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index e08b3bfeb656..511a9426cec5 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -43,6 +43,7 @@
 # define TRAP_ILLEGAL_SLOT_INST	6
 # define TRAP_ADDRESS_ERROR	9
 # ifdef CONFIG_CPU_SH2A
+#  define TRAP_FPU_ERROR	13
 #  define TRAP_DIVZERO_ERROR	17
 #  define TRAP_DIVOVF_ERROR	18
 # endif
@@ -851,6 +852,9 @@ void __init trap_init(void)
 #ifdef CONFIG_CPU_SH2A
 	set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error);
 	set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error);
+#ifdef CONFIG_SH_FPU
+	set_exception_table_vec(TRAP_FPU_ERROR, fpu_error_trap_handler);
+#endif
 #endif
 
 	/* Setup VBR for boot cpu */
diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile
index ebb55d1149f5..8596cc78e18d 100644
--- a/arch/sh/lib/Makefile
+++ b/arch/sh/lib/Makefile
@@ -2,9 +2,11 @@
 # Makefile for SuperH-specific library files..
 #
 
-lib-y  = delay.o io.o memset.o memmove.o memchr.o \
+lib-y  = delay.o memset.o memmove.o memchr.o \
 	 checksum.o strlen.o div64.o div64-generic.o
 
+obj-y				+= io.o
+
 memcpy-y			:= memcpy.o
 memcpy-$(CONFIG_CPU_SH4)	:= memcpy-sh4.o
 
diff --git a/arch/sh/lib64/panic.c b/arch/sh/lib64/panic.c
index ff559e2a96f7..da32ba7b5fcc 100644
--- a/arch/sh/lib64/panic.c
+++ b/arch/sh/lib64/panic.c
@@ -8,7 +8,7 @@
 
 #include <linux/kernel.h>
 #include <asm/io.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 
 /* THIS IS A PHYSICAL ADDRESS */
 #define HDSP2534_ADDR (0x04002100)
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 5fd218430b19..9c131cac91a4 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -145,25 +145,39 @@ choice
 
 config PAGE_SIZE_4KB
 	bool "4kB"
-	depends on !X2TLB
+	depends on !MMU || !X2TLB
 	help
 	  This is the default page size used by all SuperH CPUs.
 
 config PAGE_SIZE_8KB
 	bool "8kB"
-	depends on X2TLB
+	depends on !MMU || X2TLB
 	help
 	  This enables 8kB pages as supported by SH-X2 and later MMUs.
 
+config PAGE_SIZE_16KB
+	bool "16kB"
+	depends on !MMU
+	help
+	  This enables 16kB pages on MMU-less SH systems.
+
 config PAGE_SIZE_64KB
 	bool "64kB"
-	depends on CPU_SH4 || CPU_SH5
+	depends on !MMU || CPU_SH4 || CPU_SH5
 	help
 	  This enables support for 64kB pages, possible on all SH-4
 	  CPUs and later.
 
 endchoice
 
+config ENTRY_OFFSET
+	hex
+	default "0x00001000" if PAGE_SIZE_4KB
+	default "0x00002000" if PAGE_SIZE_8KB
+	default "0x00004000" if PAGE_SIZE_16KB
+	default "0x00010000" if PAGE_SIZE_64KB
+	default "0x00000000"
+
 choice
 	prompt "HugeTLB page size"
 	depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU
@@ -223,7 +237,6 @@ choice
 
 config CACHE_WRITEBACK
 	bool "Write-back"
-	depends on CPU_SH2A || CPU_SH3 || CPU_SH4 || CPU_SH5
 
 config CACHE_WRITETHROUGH
 	bool "Write-through"
diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32
index e295db60b91b..70e0906023cc 100644
--- a/arch/sh/mm/Makefile_32
+++ b/arch/sh/mm/Makefile_32
@@ -5,12 +5,15 @@
 obj-y			:= init.o extable_32.o consistent.o
 
 ifndef CONFIG_CACHE_OFF
-obj-$(CONFIG_CPU_SH2)		+= cache-sh2.o
-obj-$(CONFIG_CPU_SH3)		+= cache-sh3.o
-obj-$(CONFIG_CPU_SH4)		+= cache-sh4.o
-obj-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
+cache-$(CONFIG_CPU_SH2)		:= cache-sh2.o
+cache-$(CONFIG_CPU_SH2A)	:= cache-sh2a.o
+cache-$(CONFIG_CPU_SH3)		:= cache-sh3.o
+cache-$(CONFIG_CPU_SH4)		:= cache-sh4.o
+cache-$(CONFIG_SH7705_CACHE_32KB)	+= cache-sh7705.o
 endif
 
+obj-y			+= $(cache-y)
+
 mmu-y			:= tlb-nommu.o pg-nommu.o
 mmu-$(CONFIG_MMU)	:= fault_32.o tlbflush_32.o ioremap_32.o
 
diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c
index c5b56d52b7d2..0e189ccd4a77 100644
--- a/arch/sh/mm/cache-debugfs.c
+++ b/arch/sh/mm/cache-debugfs.c
@@ -120,7 +120,7 @@ static const struct file_operations cache_debugfs_fops = {
 	.open		= cache_debugfs_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
-	.release	= seq_release,
+	.release	= single_release,
 };
 
 static int __init cache_debugfs_init(void)
diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c
index 6614033f6be9..c4e80d2b764b 100644
--- a/arch/sh/mm/cache-sh2.c
+++ b/arch/sh/mm/cache-sh2.c
@@ -2,6 +2,7 @@
  * arch/sh/mm/cache-sh2.c
  *
  * Copyright (C) 2002 Paul Mundt
+ * Copyright (C) 2008 Yoshinori Sato
  *
  * Released under the terms of the GNU GPL v2.0.
  */
@@ -24,8 +25,15 @@ void __flush_wback_region(void *start, int size)
 	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
 	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		/* FIXME cache purge */
-		ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008);
+		unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0);
+		int way;
+		for (way = 0; way < 4; way++) {
+			unsigned long data =  ctrl_inl(addr | (way << 12));
+			if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
+				data &= ~SH_CACHE_UPDATED;
+				ctrl_outl(data, addr | (way << 12));
+			}
+		}
 	}
 }
 
@@ -37,21 +45,40 @@ void __flush_purge_region(void *start, int size)
 	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
 	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
-	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008);
-	}
+
+	for (v = begin; v < end; v+=L1_CACHE_BYTES)
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
 }
 
 void __flush_invalidate_region(void *start, int size)
 {
+#ifdef CONFIG_CACHE_WRITEBACK
+	/*
+	 * SH-2 does not support individual line invalidation, only a
+	 * global invalidate.
+	 */
+	unsigned long ccr;
+	unsigned long flags;
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	ccr = ctrl_inl(CCR);
+	ccr |= CCR_CACHE_INVALIDATE;
+	ctrl_outl(ccr, CCR);
+
+	back_to_cached();
+	local_irq_restore(flags);
+#else
 	unsigned long v;
 	unsigned long begin, end;
 
 	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
 	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
 		& ~(L1_CACHE_BYTES-1);
-	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
-		ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008);
-	}
-}
 
+	for (v = begin; v < end; v+=L1_CACHE_BYTES)
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008);
+#endif
+}
diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c
new file mode 100644
index 000000000000..62c0c5f35120
--- /dev/null
+++ b/arch/sh/mm/cache-sh2a.c
@@ -0,0 +1,129 @@
+/*
+ * arch/sh/mm/cache-sh2a.c
+ *
+ * Copyright (C) 2008 Yoshinori Sato
+ *
+ * Released under the terms of the GNU GPL v2.0.
+ */
+
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/cache.h>
+#include <asm/addrspace.h>
+#include <asm/processor.h>
+#include <asm/cacheflush.h>
+#include <asm/io.h>
+
+void __flush_wback_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+	unsigned long flags;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0);
+		int way;
+		for (way = 0; way < 4; way++) {
+			unsigned long data =  ctrl_inl(addr | (way << 11));
+			if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
+				data &= ~SH_CACHE_UPDATED;
+				ctrl_outl(data, addr | (way << 11));
+			}
+		}
+	}
+
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+void __flush_purge_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+	unsigned long flags;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+	}
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+void __flush_invalidate_region(void *start, int size)
+{
+	unsigned long v;
+	unsigned long begin, end;
+	unsigned long flags;
+
+	begin = (unsigned long)start & ~(L1_CACHE_BYTES-1);
+	end = ((unsigned long)start + size + L1_CACHE_BYTES-1)
+		& ~(L1_CACHE_BYTES-1);
+	local_irq_save(flags);
+	jump_to_uncached();
+
+#ifdef CONFIG_CACHE_WRITEBACK
+	ctrl_outl(ctrl_inl(CCR) | CCR_OCACHE_INVALIDATE, CCR);
+	/* I-cache invalidate */
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+	}
+#else
+	for (v = begin; v < end; v+=L1_CACHE_BYTES) {
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+		ctrl_outl((v & CACHE_PHYSADDR_MASK),
+			  CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008);
+	}
+#endif
+	back_to_cached();
+	local_irq_restore(flags);
+}
+
+/* WBack O-Cache and flush I-Cache */
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+	unsigned long v;
+	unsigned long flags;
+
+	start = start & ~(L1_CACHE_BYTES-1);
+	end = (end + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1);
+
+	local_irq_save(flags);
+	jump_to_uncached();
+
+	for (v = start; v < end; v+=L1_CACHE_BYTES) {
+		unsigned long addr = (v & 0x000007f0);
+		int way;
+		/* O-Cache writeback */
+		for (way = 0; way < 4; way++) {
+			unsigned long data =  ctrl_inl(CACHE_OC_ADDRESS_ARRAY | addr | (way << 11));
+			if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) {
+				data &= ~SH_CACHE_UPDATED;
+				ctrl_outl(data, CACHE_OC_ADDRESS_ARRAY | addr | (way << 11));
+			}
+		}
+		/* I-Cache invalidate */
+		ctrl_outl(addr,
+			  CACHE_IC_ADDRESS_ARRAY | addr | 0x00000008);
+	}
+
+	back_to_cached();
+	local_irq_restore(flags);
+}
diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c
index 43d7ff6b6ec7..1fdc8d90254a 100644
--- a/arch/sh/mm/cache-sh4.c
+++ b/arch/sh/mm/cache-sh4.c
@@ -4,6 +4,7 @@
  * Copyright (C) 1999, 2000, 2002  Niibe Yutaka
  * Copyright (C) 2001 - 2007  Paul Mundt
  * Copyright (C) 2003  Richard Curnow
+ * Copyright (c) 2007 STMicroelectronics (R&D) Ltd.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -22,6 +23,7 @@
  * entirety.
  */
 #define MAX_DCACHE_PAGES	64	/* XXX: Tune for ways */
+#define MAX_ICACHE_PAGES	32
 
 static void __flush_dcache_segment_1way(unsigned long start,
 					unsigned long extent);
@@ -178,42 +180,45 @@ void __flush_invalidate_region(void *start, int size)
 /*
  * Write back the range of D-cache, and purge the I-cache.
  *
- * Called from kernel/module.c:sys_init_module and routine for a.out format.
+ * Called from kernel/module.c:sys_init_module and routine for a.out format,
+ * signal handler code and kprobes code
  */
 void flush_icache_range(unsigned long start, unsigned long end)
 {
-	flush_cache_all();
-}
-
-/*
- * Write back the D-cache and purge the I-cache for signal trampoline.
- * .. which happens to be the same behavior as flush_icache_range().
- * So, we simply flush out a line.
- */
-void __uses_jump_to_uncached flush_cache_sigtramp(unsigned long addr)
-{
-	unsigned long v, index;
-	unsigned long flags;
+	int icacheaddr;
+	unsigned long flags, v;
 	int i;
 
-	v = addr & ~(L1_CACHE_BYTES-1);
-	asm volatile("ocbwb	%0"
-		     : /* no output */
-		     : "m" (__m(v)));
-
-	index = CACHE_IC_ADDRESS_ARRAY |
-			(v & boot_cpu_data.icache.entry_mask);
-
-	local_irq_save(flags);
-	jump_to_uncached();
-
-	for (i = 0; i < boot_cpu_data.icache.ways;
-	     i++, index += boot_cpu_data.icache.way_incr)
-		ctrl_outl(0, index);	/* Clear out Valid-bit */
-
-	back_to_cached();
-	wmb();
-	local_irq_restore(flags);
+       /* If there are too many pages then just blow the caches */
+        if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) {
+                flush_cache_all();
+       } else {
+               /* selectively flush d-cache then invalidate the i-cache */
+               /* this is inefficient, so only use for small ranges */
+               start &= ~(L1_CACHE_BYTES-1);
+               end += L1_CACHE_BYTES-1;
+               end &= ~(L1_CACHE_BYTES-1);
+
+               local_irq_save(flags);
+               jump_to_uncached();
+
+               for (v = start; v < end; v+=L1_CACHE_BYTES) {
+                       asm volatile("ocbwb     %0"
+                                    : /* no output */
+                                    : "m" (__m(v)));
+
+                       icacheaddr = CACHE_IC_ADDRESS_ARRAY | (
+                                       v & cpu_data->icache.entry_mask);
+
+                       for (i = 0; i < cpu_data->icache.ways;
+                               i++, icacheaddr += cpu_data->icache.way_incr)
+                                       /* Clear i-cache line valid-bit */
+                                       ctrl_outl(0, icacheaddr);
+               }
+
+		back_to_cached();
+		local_irq_restore(flags);
+	}
 }
 
 static inline void flush_cache_4096(unsigned long start,
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index d3c33fc5b1c2..b2ce014401b5 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -10,6 +10,7 @@
  * for more details.
  */
 #include <linux/mm.h>
+#include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <asm/cacheflush.h>
 #include <asm/addrspace.h>
@@ -27,21 +28,10 @@ void *dma_alloc_coherent(struct device *dev, size_t size,
 			   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret, *ret_nocache;
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
 	int order = get_order(size);
 
-	if (mem) {
-		int page = bitmap_find_free_region(mem->bitmap, mem->size,
-						     order);
-		if (page >= 0) {
-			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
-			ret = mem->virt_base + (page << PAGE_SHIFT);
-			memset(ret, 0, size);
-			return ret;
-		}
-		if (mem->flags & DMA_MEMORY_EXCLUSIVE)
-			return NULL;
-	}
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+		return ret;
 
 	ret = (void *)__get_free_pages(gfp, order);
 	if (!ret)
@@ -71,11 +61,7 @@ void dma_free_coherent(struct device *dev, size_t size,
 	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
 	int order = get_order(size);
 
-	if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) {
-		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-
-		bitmap_release_region(mem->bitmap, page, order);
-	} else {
+	if (!dma_release_from_coherent(dev, order, vaddr)) {
 		WARN_ON(irqs_disabled());	/* for portability */
 		BUG_ON(mem && mem->flags & DMA_MEMORY_EXCLUSIVE);
 		free_pages((unsigned long)phys_to_virt(dma_handle), order);
@@ -84,83 +70,6 @@ void dma_free_coherent(struct device *dev, size_t size,
 }
 EXPORT_SYMBOL(dma_free_coherent);
 
-int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-				dma_addr_t device_addr, size_t size, int flags)
-{
-	void __iomem *mem_base = NULL;
-	int pages = size >> PAGE_SHIFT;
-	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
-
-	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
-		goto out;
-	if (!size)
-		goto out;
-	if (dev->dma_mem)
-		goto out;
-
-	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
-
-	mem_base = ioremap_nocache(bus_addr, size);
-	if (!mem_base)
-		goto out;
-
-	dev->dma_mem = kmalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-	if (!dev->dma_mem)
-		goto out;
-	dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-	if (!dev->dma_mem->bitmap)
-		goto free1_out;
-
-	dev->dma_mem->virt_base = mem_base;
-	dev->dma_mem->device_base = device_addr;
-	dev->dma_mem->size = pages;
-	dev->dma_mem->flags = flags;
-
-	if (flags & DMA_MEMORY_MAP)
-		return DMA_MEMORY_MAP;
-
-	return DMA_MEMORY_IO;
-
- free1_out:
-	kfree(dev->dma_mem);
- out:
-	if (mem_base)
-		iounmap(mem_base);
-	return 0;
-}
-EXPORT_SYMBOL(dma_declare_coherent_memory);
-
-void dma_release_declared_memory(struct device *dev)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-
-	if (!mem)
-		return;
-	dev->dma_mem = NULL;
-	iounmap(mem->virt_base);
-	kfree(mem->bitmap);
-	kfree(mem);
-}
-EXPORT_SYMBOL(dma_release_declared_memory);
-
-void *dma_mark_declared_memory_occupied(struct device *dev,
-					dma_addr_t device_addr, size_t size)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT;
-	int pos, err;
-
-	if (!mem)
-		return ERR_PTR(-EINVAL);
-
-	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
-	if (err != 0)
-		return ERR_PTR(err);
-	return mem->virt_base + (pos << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
-
 void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 		    enum dma_data_direction direction)
 {
@@ -185,3 +94,32 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	}
 }
 EXPORT_SYMBOL(dma_cache_sync);
+
+int platform_resource_setup_memory(struct platform_device *pdev,
+				   char *name, unsigned long memsize)
+{
+	struct resource *r;
+	dma_addr_t dma_handle;
+	void *buf;
+
+	r = pdev->resource + pdev->num_resources - 1;
+	if (r->flags) {
+		pr_warning("%s: unable to find empty space for resource\n",
+			name);
+		return -EINVAL;
+	}
+
+	buf = dma_alloc_coherent(NULL, memsize, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_warning("%s: unable to allocate memory\n", name);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, memsize);
+
+	r->flags = IORESOURCE_MEM;
+	r->start = dma_handle;
+	r->end = r->start + memsize - 1;
+	r->name = name;
+	return 0;
+}
diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c
index d1fa27594c6e..0c776fdfbdda 100644
--- a/arch/sh/mm/fault_32.c
+++ b/arch/sh/mm/fault_32.c
@@ -37,16 +37,12 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 	int fault;
 	siginfo_t info;
 
-	trace_hardirqs_on();
-	local_irq_enable();
-
 #ifdef CONFIG_SH_KGDB
 	if (kgdb_nofault && kgdb_bus_err_hook)
 		kgdb_bus_err_hook();
 #endif
 
 	tsk = current;
-	mm = tsk->mm;
 	si_code = SEGV_MAPERR;
 
 	if (unlikely(address >= TASK_SIZE)) {
@@ -88,6 +84,14 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs,
 		return;
 	}
 
+	/* Only enable interrupts if they were on before the fault */
+	if ((regs->sr & SR_IMASK) != SR_IMASK) {
+		trace_hardirqs_on();
+		local_irq_enable();
+	}
+
+	mm = tsk->mm;
+
 	/*
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
diff --git a/arch/sh/mm/fault_64.c b/arch/sh/mm/fault_64.c
index 399d53710d2f..bd63b961b2a9 100644
--- a/arch/sh/mm/fault_64.c
+++ b/arch/sh/mm/fault_64.c
@@ -39,7 +39,7 @@
 #include <asm/uaccess.h>
 #include <asm/pgalloc.h>
 #include <asm/mmu_context.h>
-#include <asm/cpu/registers.h>
+#include <cpu/registers.h>
 
 /* Callable from fault.c, so not static */
 inline void __do_tlb_refill(unsigned long address,
diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c
index ae8c321d6e2a..9304117039c4 100644
--- a/arch/sh/mm/hugetlbpage.c
+++ b/arch/sh/mm/hugetlbpage.c
@@ -22,7 +22,8 @@
 #include <asm/tlbflush.h>
 #include <asm/cacheflush.h>
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -78,6 +79,11 @@ int pmd_huge(pmd_t pmd)
 	return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 			     pmd_t *pmd, int write)
 {
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index d7df26bd1e54..b75a7acd62fb 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -25,47 +25,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 pgd_t swapper_pg_dir[PTRS_PER_PGD];
 unsigned long cached_to_uncached = 0;
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0, free = 0;
-	int shared = 0, cached = 0, slab = 0;
-	pg_data_t *pgdat;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-
-	for_each_online_pgdat(pgdat) {
-		unsigned long flags, i;
-
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (PageSlab(page))
-				slab++;
-			else if (!page_count(page))
-				free++;
-			else
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	printk("%d pages of RAM\n", total);
-	printk("%d free pages\n", free);
-	printk("%d reserved pages\n", reserved);
-	printk("%d slab pages\n", slab);
-	printk("%d pages shared\n", shared);
-	printk("%d pages swap cached\n", cached);
-	printk(KERN_INFO "Total of %ld pages in page table cache\n",
-	       quicklist_total_size());
-}
-
 #ifdef CONFIG_MMU
 static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot)
 {
@@ -191,7 +150,7 @@ void __init paging_init(void)
 		pg_data_t *pgdat = NODE_DATA(nid);
 		unsigned long low, start_pfn;
 
-		start_pfn = pgdat->bdata->node_boot_start >> PAGE_SHIFT;
+		start_pfn = pgdat->bdata->node_min_pfn;
 		low = pgdat->bdata->node_low_pfn;
 
 		if (max_zone_pfns[ZONE_NORMAL] < low)
diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c
index 1663199ce888..095d93bec7cd 100644
--- a/arch/sh/mm/numa.c
+++ b/arch/sh/mm/numa.c
@@ -14,7 +14,6 @@
 #include <linux/pfn.h>
 #include <asm/sections.h>
 
-static bootmem_data_t plat_node_bdata[MAX_NUMNODES];
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL_GPL(node_data);
 
@@ -35,7 +34,7 @@ void __init setup_memory(void)
 	NODE_DATA(0) = pfn_to_kaddr(free_pfn);
 	memset(NODE_DATA(0), 0, sizeof(struct pglist_data));
 	free_pfn += PFN_UP(sizeof(struct pglist_data));
-	NODE_DATA(0)->bdata = &plat_node_bdata[0];
+	NODE_DATA(0)->bdata = &bootmem_node_data[0];
 
 	/* Set up node 0 */
 	setup_bootmem_allocator(free_pfn);
@@ -66,7 +65,7 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end)
 	free_pfn += PFN_UP(sizeof(struct pglist_data));
 	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
-	NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
+	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 	NODE_DATA(nid)->node_start_pfn = start_pfn;
 	NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn;
 
diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c
index 8c7a9ca79879..38870e0fc182 100644
--- a/arch/sh/mm/pg-sh4.c
+++ b/arch/sh/mm/pg-sh4.c
@@ -111,7 +111,7 @@ EXPORT_SYMBOL(copy_user_highpage);
 /*
  * For SH-4, we have our own implementation for ptep_get_and_clear
  */
-inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
 	pte_t pte = *ptep;
 
diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c
index 7f885b7f8aff..eaf25147194c 100644
--- a/arch/sh/mm/pg-sh7705.c
+++ b/arch/sh/mm/pg-sh7705.c
@@ -118,7 +118,7 @@ void copy_user_page(void *to, void *from, unsigned long address, struct page *pg
  * For SH7705, we have our own implementation for ptep_get_and_clear
  * Copied from pg-sh4.c
  */
-inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 {
 	pte_t pte = *ptep;
 
diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c
index 0b0ec6e04753..cef727669c87 100644
--- a/arch/sh/mm/pmb.c
+++ b/arch/sh/mm/pmb.c
@@ -293,7 +293,7 @@ void pmb_unmap(unsigned long addr)
 	} while (pmbe);
 }
 
-static void pmb_cache_ctor(struct kmem_cache *cachep, void *pmb)
+static void pmb_cache_ctor(void *pmb)
 {
 	struct pmb_entry *pmbe = pmb;
 
@@ -385,7 +385,7 @@ static const struct file_operations pmb_debugfs_fops = {
 	.open		= pmb_debugfs_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
-	.release	= seq_release,
+	.release	= single_release,
 };
 
 static int __init pmb_debugfs_init(void)
diff --git a/arch/sh/mm/tlb-sh5.c b/arch/sh/mm/tlb-sh5.c
index f34274a1ded3..dae131243bcc 100644
--- a/arch/sh/mm/tlb-sh5.c
+++ b/arch/sh/mm/tlb-sh5.c
@@ -15,9 +15,7 @@
 #include <asm/mmu_context.h>
 
 /**
- * sh64_tlb_init
- *
- * Perform initial setup for the DTLB and ITLB.
+ * sh64_tlb_init - Perform initial setup for the DTLB and ITLB.
  */
 int __init sh64_tlb_init(void)
 {
@@ -46,9 +44,7 @@ int __init sh64_tlb_init(void)
 }
 
 /**
- * sh64_next_free_dtlb_entry
- *
- * Find the next available DTLB entry
+ * sh64_next_free_dtlb_entry - Find the next available DTLB entry
  */
 unsigned long long sh64_next_free_dtlb_entry(void)
 {
@@ -56,9 +52,7 @@ unsigned long long sh64_next_free_dtlb_entry(void)
 }
 
 /**
- * sh64_get_wired_dtlb_entry
- *
- * Allocate a wired (locked-in) entry in the DTLB
+ * sh64_get_wired_dtlb_entry - Allocate a wired (locked-in) entry in the DTLB
  */
 unsigned long long sh64_get_wired_dtlb_entry(void)
 {
@@ -71,12 +65,10 @@ unsigned long long sh64_get_wired_dtlb_entry(void)
 }
 
 /**
- * sh64_put_wired_dtlb_entry
+ * sh64_put_wired_dtlb_entry - Free a wired (locked-in) entry in the DTLB.
  *
  * @entry:	Address of TLB slot.
  *
- * Free a wired (locked-in) entry in the DTLB.
- *
  * Works like a stack, last one to allocate must be first one to free.
  */
 int sh64_put_wired_dtlb_entry(unsigned long long entry)
@@ -115,7 +107,7 @@ int sh64_put_wired_dtlb_entry(unsigned long long entry)
 }
 
 /**
- * sh64_setup_tlb_slot
+ * sh64_setup_tlb_slot - Load up a translation in a wired slot.
  *
  * @config_addr:	Address of TLB slot.
  * @eaddr:		Virtual address.
@@ -154,7 +146,7 @@ inline void sh64_setup_tlb_slot(unsigned long long config_addr,
 }
 
 /**
- * sh64_teardown_tlb_slot
+ * sh64_teardown_tlb_slot - Teardown a translation.
  *
  * @config_addr:	Address of TLB slot.
  *
diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types
index 1bba7d36be90..0a11cc08f0a5 100644
--- a/arch/sh/tools/mach-types
+++ b/arch/sh/tools/mach-types
@@ -46,3 +46,7 @@ R2D_1			RTS7751R2D_1
 CAYMAN			SH_CAYMAN
 SDK7780			SH_SDK7780
 MIGOR			SH_MIGOR
+RSK7203			SH_RSK7203
+AP325RXA		SH_AP325RXA
+SH7763RDP		SH_SH7763RDP
+SH7785LCR		SH_SH7785LCR
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 789724e61e83..a214002114ed 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -68,6 +68,7 @@ config SPARC
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_ARCH_KGDB if !SMP
+	select HAVE_ARCH_TRACEHOOK
 
 # Identify this as a Sparc32 build
 config SPARC32
@@ -298,20 +299,6 @@ config UNIX98_PTYS
 	  Read the instructions in <file:Documentation/Changes> pertaining to
 	  pseudo terminals. It's safe to say N.
 
-config UNIX98_PTY_COUNT
-	int "Maximum number of Unix98 PTYs in use (0-2048)"
-	depends on UNIX98_PTYS
-	default "256"
-	help
-	  The maximum number of Unix98 PTYs that can be used at any one time.
-	  The default is 256, and should be enough for desktop systems. Server
-	  machines which support incoming telnet/rlogin/ssh connections and/or
-	  serve several X terminals may want to increase this: every incoming
-	  connection and every xterm uses up one PTY.
-
-	  When not in use, each additional set of 256 PTYs occupy
-	  approximately 8 KB of kernel memory on 32-bit architectures.
-
 endmenu
 
 source "fs/Kconfig"
diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile
index fef28e267a52..6668e6037af6 100644
--- a/arch/sparc/Makefile
+++ b/arch/sparc/Makefile
@@ -18,6 +18,7 @@ CHECKFLAGS	+= -D__sparc__
 #KBUILD_CFLAGS += -g -pipe -fcall-used-g5 -fcall-used-g7
 KBUILD_CFLAGS += -m32 -pipe -mno-fpu -fcall-used-g5 -fcall-used-g7
 KBUILD_AFLAGS += -m32
+CPPFLAGS_vmlinux.lds += -m32
 
 #LDFLAGS_vmlinux = -N -Ttext 0xf0004000
 #  Since 2.5.40, the first stage is left not btfix-ed.
diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild
new file mode 100644
index 000000000000..a5f0ce734ff7
--- /dev/null
+++ b/arch/sparc/include/asm/Kbuild
@@ -0,0 +1,45 @@
+# User exported sparc header files
+include include/asm-generic/Kbuild.asm
+
+header-y += ipcbuf_32.h
+header-y += ipcbuf_64.h
+header-y += posix_types_32.h
+header-y += posix_types_64.h
+header-y += ptrace_32.h
+header-y += ptrace_64.h
+header-y += sigcontext_32.h
+header-y += sigcontext_64.h
+header-y += siginfo_32.h
+header-y += siginfo_64.h
+header-y += signal_32.h
+header-y += signal_64.h
+header-y += stat_32.h
+header-y += stat_64.h
+header-y += statfs_32.h
+header-y += statfs_64.h
+header-y += unistd_32.h
+header-y += unistd_64.h
+
+header-y += apc.h
+header-y += asi.h
+header-y += bpp.h
+header-y += display7seg.h
+header-y += envctrl.h
+header-y += fbio.h
+header-y += jsflash.h
+header-y += openprom.h
+header-y += openprom_32.h
+header-y += openprom_64.h
+header-y += openpromio.h
+header-y += perfctr.h
+header-y += psrcompat.h
+header-y += psr.h
+header-y += pstate.h
+header-y += reg.h
+header-y += reg_32.h
+header-y += reg_64.h
+header-y += traps.h
+header-y += uctx.h
+header-y += utrap.h
+header-y += vfc_ioctls.h
+header-y += watchdog.h
diff --git a/arch/sparc/include/asm/agp.h b/arch/sparc/include/asm/agp.h
new file mode 100644
index 000000000000..c2456870b05c
--- /dev/null
+++ b/arch/sparc/include/asm/agp.h
@@ -0,0 +1,20 @@
+#ifndef AGP_H
+#define AGP_H 1
+
+/* dummy for now */
+
+#define map_page_into_agp(page)
+#define unmap_page_from_agp(page)
+#define flush_agp_cache() mb()
+
+/* Convert a physical address to an address suitable for the GART. */
+#define phys_to_gart(x) (x)
+#define gart_to_phys(x) (x)
+
+/* GATT allocation. Returns/accepts GATT kernel virtual address. */
+#define alloc_gatt_pages(order)		\
+	((char *)__get_free_pages(GFP_KERNEL, (order)))
+#define free_gatt_pages(table, order)	\
+	free_pages((unsigned long)(table), (order))
+
+#endif
diff --git a/arch/sparc/include/asm/apb.h b/arch/sparc/include/asm/apb.h
new file mode 100644
index 000000000000..8f3b57db810f
--- /dev/null
+++ b/arch/sparc/include/asm/apb.h
@@ -0,0 +1,36 @@
+/*
+ * apb.h: Advanced PCI Bridge Configuration Registers and Bits
+ *
+ * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _SPARC64_APB_H
+#define _SPARC64_APB_H
+
+#define APB_TICK_REGISTER			0xb0
+#define APB_INT_ACK				0xb8
+#define APB_PRIMARY_MASTER_RETRY_LIMIT		0xc0
+#define APB_DMA_ASFR				0xc8
+#define APB_DMA_AFAR				0xd0
+#define APB_PIO_TARGET_RETRY_LIMIT		0xd8
+#define APB_PIO_TARGET_LATENCY_TIMER		0xd9
+#define APB_DMA_TARGET_RETRY_LIMIT		0xda
+#define APB_DMA_TARGET_LATENCY_TIMER		0xdb
+#define APB_SECONDARY_MASTER_RETRY_LIMIT	0xdc
+#define APB_SECONDARY_CONTROL			0xdd
+#define APB_IO_ADDRESS_MAP			0xde
+#define APB_MEM_ADDRESS_MAP			0xdf
+
+#define APB_PCI_CONTROL_LOW			0xe0
+#  define APB_PCI_CTL_LOW_ARB_PARK			(1 << 21)
+#  define APB_PCI_CTL_LOW_ERRINT_EN			(1 << 8)
+
+#define APB_PCI_CONTROL_HIGH			0xe4
+#  define APB_PCI_CTL_HIGH_SERR				(1 << 2)
+#  define APB_PCI_CTL_HIGH_ARBITER_EN			(1 << 0)
+
+#define APB_PIO_ASFR				0xe8
+#define APB_PIO_AFAR				0xf0
+#define APB_DIAG_REGISTER			0xf8
+
+#endif /* !(_SPARC64_APB_H) */
diff --git a/arch/sparc/include/asm/apc.h b/arch/sparc/include/asm/apc.h
new file mode 100644
index 000000000000..24e9a7d4d97e
--- /dev/null
+++ b/arch/sparc/include/asm/apc.h
@@ -0,0 +1,64 @@
+/* apc - Driver definitions for power management functions
+ * of Aurora Personality Chip (APC) on SPARCstation-4/5 and 
+ * derivatives
+ *
+ * Copyright (c) 2001 Eric Brower (ebrower@usa.net)
+ *
+ */
+
+#ifndef _SPARC_APC_H
+#define _SPARC_APC_H
+
+#include <linux/ioctl.h>
+
+#define APC_IOC	'A'
+
+#define APCIOCGFANCTL _IOR(APC_IOC, 0x00, int)	/* Get fan speed	*/
+#define APCIOCSFANCTL _IOW(APC_IOC, 0x01, int)	/* Set fan speed	*/
+
+#define APCIOCGCPWR   _IOR(APC_IOC, 0x02, int)	/* Get CPOWER state	*/
+#define APCIOCSCPWR   _IOW(APC_IOC, 0x03, int)	/* Set CPOWER state	*/
+
+#define APCIOCGBPORT   _IOR(APC_IOC, 0x04, int)	/* Get BPORT state 	*/
+#define APCIOCSBPORT   _IOW(APC_IOC, 0x05, int)	/* Set BPORT state	*/
+
+/*
+ * Register offsets
+ */
+#define APC_IDLE_REG	0x00
+#define APC_FANCTL_REG	0x20
+#define APC_CPOWER_REG	0x24
+#define APC_BPORT_REG	0x30
+
+#define APC_REGMASK		0x01
+#define APC_BPMASK		0x03
+
+/*
+ * IDLE - CPU standby values (set to initiate standby)
+ */
+#define APC_IDLE_ON		0x01
+
+/*
+ * FANCTL - Fan speed control state values
+ */
+#define APC_FANCTL_HI	0x00	/* Fan speed high	*/
+#define APC_FANCTL_LO	0x01	/* Fan speed low	*/
+
+/*
+ * CPWR - Convenience power outlet state values 
+ */
+#define APC_CPOWER_ON	0x00	/* Conv power on	*/
+#define APC_CPOWER_OFF	0x01	/* Conv power off	*/
+
+/*
+ * BPA/BPB - Read-Write "Bit Ports" state values (reset to 0 at power-on)
+ *
+ * WARNING: Internal usage of bit ports is platform dependent--
+ * don't modify BPORT settings unless you know what you are doing.
+ * 
+ * On SS5 BPA seems to toggle onboard ethernet loopback... -E
+ */
+#define APC_BPORT_A		0x01	/* Bit Port A		*/
+#define APC_BPORT_B		0x02	/* Bit Port B		*/
+
+#endif /* !(_SPARC_APC_H) */
diff --git a/arch/sparc/include/asm/asi.h b/arch/sparc/include/asm/asi.h
new file mode 100644
index 000000000000..74703c5ef985
--- /dev/null
+++ b/arch/sparc/include/asm/asi.h
@@ -0,0 +1,262 @@
+#ifndef _SPARC_ASI_H
+#define _SPARC_ASI_H
+
+/* asi.h:  Address Space Identifier values for the sparc.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Pioneer work for sun4m: Paul Hatchman (paul@sfe.com.au)
+ * Joint edition for sun4c+sun4m: Pete A. Zaitcev <zaitcev@ipmce.su>
+ */
+
+/* The first batch are for the sun4c. */
+
+#define ASI_NULL1           0x00
+#define ASI_NULL2           0x01
+
+/* sun4c and sun4 control registers and mmu/vac ops */
+#define ASI_CONTROL         0x02
+#define ASI_SEGMAP          0x03
+#define ASI_PTE             0x04
+#define ASI_HWFLUSHSEG      0x05
+#define ASI_HWFLUSHPAGE     0x06
+#define ASI_REGMAP          0x06
+#define ASI_HWFLUSHCONTEXT  0x07
+
+#define ASI_USERTXT         0x08
+#define ASI_KERNELTXT       0x09
+#define ASI_USERDATA        0x0a
+#define ASI_KERNELDATA      0x0b
+
+/* VAC Cache flushing on sun4c and sun4 */
+#define ASI_FLUSHSEG        0x0c
+#define ASI_FLUSHPG         0x0d
+#define ASI_FLUSHCTX        0x0e
+
+/* SPARCstation-5: only 6 bits are decoded. */
+/* wo = Write Only, rw = Read Write;        */
+/* ss = Single Size, as = All Sizes;        */
+#define ASI_M_RES00         0x00   /* Don't touch... */
+#define ASI_M_UNA01         0x01   /* Same here... */
+#define ASI_M_MXCC          0x02   /* Access to TI VIKING MXCC registers */
+#define ASI_M_FLUSH_PROBE   0x03   /* Reference MMU Flush/Probe; rw, ss */
+#define ASI_M_MMUREGS       0x04   /* MMU Registers; rw, ss */
+#define ASI_M_TLBDIAG       0x05   /* MMU TLB only Diagnostics */
+#define ASI_M_DIAGS         0x06   /* Reference MMU Diagnostics */
+#define ASI_M_IODIAG        0x07   /* MMU I/O TLB only Diagnostics */
+#define ASI_M_USERTXT       0x08   /* Same as ASI_USERTXT; rw, as */
+#define ASI_M_KERNELTXT     0x09   /* Same as ASI_KERNELTXT; rw, as */
+#define ASI_M_USERDATA      0x0A   /* Same as ASI_USERDATA; rw, as */
+#define ASI_M_KERNELDATA    0x0B   /* Same as ASI_KERNELDATA; rw, as */
+#define ASI_M_TXTC_TAG      0x0C   /* Instruction Cache Tag; rw, ss */
+#define ASI_M_TXTC_DATA     0x0D   /* Instruction Cache Data; rw, ss */
+#define ASI_M_DATAC_TAG     0x0E   /* Data Cache Tag; rw, ss */
+#define ASI_M_DATAC_DATA    0x0F   /* Data Cache Data; rw, ss */
+
+/* The following cache flushing ASIs work only with the 'sta'
+ * instruction. Results are unpredictable for 'swap' and 'ldstuba',
+ * so don't do it.
+ */
+
+/* These ASI flushes affect external caches too. */
+#define ASI_M_FLUSH_PAGE    0x10   /* Flush I&D Cache Line (page); wo, ss */
+#define ASI_M_FLUSH_SEG     0x11   /* Flush I&D Cache Line (seg); wo, ss */
+#define ASI_M_FLUSH_REGION  0x12   /* Flush I&D Cache Line (region); wo, ss */
+#define ASI_M_FLUSH_CTX     0x13   /* Flush I&D Cache Line (context); wo, ss */
+#define ASI_M_FLUSH_USER    0x14   /* Flush I&D Cache Line (user); wo, ss */
+
+/* Block-copy operations are available only on certain V8 cpus. */
+#define ASI_M_BCOPY         0x17   /* Block copy */
+
+/* These affect only the ICACHE and are Ross HyperSparc and TurboSparc specific. */
+#define ASI_M_IFLUSH_PAGE   0x18   /* Flush I Cache Line (page); wo, ss */
+#define ASI_M_IFLUSH_SEG    0x19   /* Flush I Cache Line (seg); wo, ss */
+#define ASI_M_IFLUSH_REGION 0x1A   /* Flush I Cache Line (region); wo, ss */
+#define ASI_M_IFLUSH_CTX    0x1B   /* Flush I Cache Line (context); wo, ss */
+#define ASI_M_IFLUSH_USER   0x1C   /* Flush I Cache Line (user); wo, ss */
+
+/* Block-fill operations are available on certain V8 cpus */
+#define ASI_M_BFILL         0x1F
+
+/* This allows direct access to main memory, actually 0x20 to 0x2f are
+ * the available ASI's for physical ram pass-through, but I don't have
+ * any idea what the other ones do....
+ */
+
+#define ASI_M_BYPASS       0x20   /* Reference MMU bypass; rw, as */
+#define ASI_M_FBMEM        0x29   /* Graphics card frame buffer access */
+#define ASI_M_VMEUS        0x2A   /* VME user 16-bit access */
+#define ASI_M_VMEPS        0x2B   /* VME priv 16-bit access */
+#define ASI_M_VMEUT        0x2C   /* VME user 32-bit access */
+#define ASI_M_VMEPT        0x2D   /* VME priv 32-bit access */
+#define ASI_M_SBUS         0x2E   /* Direct SBus access */
+#define ASI_M_CTL          0x2F   /* Control Space (ECC and MXCC are here) */
+
+
+/* This is ROSS HyperSparc only. */
+#define ASI_M_FLUSH_IWHOLE 0x31   /* Flush entire ICACHE; wo, ss */
+
+/* Tsunami/Viking/TurboSparc i/d cache flash clear. */
+#define ASI_M_IC_FLCLEAR   0x36
+#define ASI_M_DC_FLCLEAR   0x37
+
+#define ASI_M_DCDR         0x39   /* Data Cache Diagnostics Register rw, ss */
+
+#define ASI_M_VIKING_TMP1  0x40	  /* Emulation temporary 1 on Viking */
+/* only available on SuperSparc I */
+/* #define ASI_M_VIKING_TMP2  0x41 */  /* Emulation temporary 2 on Viking */
+
+#define ASI_M_ACTION       0x4c   /* Breakpoint Action Register (GNU/Viking) */
+
+/* V9 Architecture mandary ASIs. */
+#define ASI_N			0x04 /* Nucleus				*/
+#define ASI_NL			0x0c /* Nucleus, little endian		*/
+#define ASI_AIUP		0x10 /* Primary, user			*/
+#define ASI_AIUS		0x11 /* Secondary, user			*/
+#define ASI_AIUPL		0x18 /* Primary, user, little endian	*/
+#define ASI_AIUSL		0x19 /* Secondary, user, little endian	*/
+#define ASI_P			0x80 /* Primary, implicit		*/
+#define ASI_S			0x81 /* Secondary, implicit		*/
+#define ASI_PNF			0x82 /* Primary, no fault		*/
+#define ASI_SNF			0x83 /* Secondary, no fault		*/
+#define ASI_PL			0x88 /* Primary, implicit, l-endian	*/
+#define ASI_SL			0x89 /* Secondary, implicit, l-endian	*/
+#define ASI_PNFL		0x8a /* Primary, no fault, l-endian	*/
+#define ASI_SNFL		0x8b /* Secondary, no fault, l-endian	*/
+
+/* SpitFire and later extended ASIs.  The "(III)" marker designates
+ * UltraSparc-III and later specific ASIs.  The "(CMT)" marker designates
+ * Chip Multi Threading specific ASIs.  "(NG)" designates Niagara specific
+ * ASIs, "(4V)" designates SUN4V specific ASIs.
+ */
+#define ASI_PHYS_USE_EC		0x14 /* PADDR, E-cachable		*/
+#define ASI_PHYS_BYPASS_EC_E	0x15 /* PADDR, E-bit			*/
+#define ASI_BLK_AIUP_4V		0x16 /* (4V) Prim, user, block ld/st	*/
+#define ASI_BLK_AIUS_4V		0x17 /* (4V) Sec, user, block ld/st	*/
+#define ASI_PHYS_USE_EC_L	0x1c /* PADDR, E-cachable, little endian*/
+#define ASI_PHYS_BYPASS_EC_E_L	0x1d /* PADDR, E-bit, little endian	*/
+#define ASI_BLK_AIUP_L_4V	0x1e /* (4V) Prim, user, block, l-endian*/
+#define ASI_BLK_AIUS_L_4V	0x1f /* (4V) Sec, user, block, l-endian	*/
+#define ASI_SCRATCHPAD		0x20 /* (4V) Scratch Pad Registers	*/
+#define ASI_MMU			0x21 /* (4V) MMU Context Registers	*/
+#define ASI_BLK_INIT_QUAD_LDD_AIUS 0x23 /* (NG) init-store, twin load,
+					 * secondary, user
+					 */
+#define ASI_NUCLEUS_QUAD_LDD	0x24 /* Cachable, qword load		*/
+#define ASI_QUEUE		0x25 /* (4V) Interrupt Queue Registers	*/
+#define ASI_QUAD_LDD_PHYS_4V	0x26 /* (4V) Physical, qword load	*/
+#define ASI_NUCLEUS_QUAD_LDD_L	0x2c /* Cachable, qword load, l-endian 	*/
+#define ASI_QUAD_LDD_PHYS_L_4V	0x2e /* (4V) Phys, qword load, l-endian	*/
+#define ASI_PCACHE_DATA_STATUS	0x30 /* (III) PCache data stat RAM diag	*/
+#define ASI_PCACHE_DATA		0x31 /* (III) PCache data RAM diag	*/
+#define ASI_PCACHE_TAG		0x32 /* (III) PCache tag RAM diag	*/
+#define ASI_PCACHE_SNOOP_TAG	0x33 /* (III) PCache snoop tag RAM diag	*/
+#define ASI_QUAD_LDD_PHYS	0x34 /* (III+) PADDR, qword load	*/
+#define ASI_WCACHE_VALID_BITS	0x38 /* (III) WCache Valid Bits diag	*/
+#define ASI_WCACHE_DATA		0x39 /* (III) WCache data RAM diag	*/
+#define ASI_WCACHE_TAG		0x3a /* (III) WCache tag RAM diag	*/
+#define ASI_WCACHE_SNOOP_TAG	0x3b /* (III) WCache snoop tag RAM diag	*/
+#define ASI_QUAD_LDD_PHYS_L	0x3c /* (III+) PADDR, qw-load, l-endian	*/
+#define ASI_SRAM_FAST_INIT	0x40 /* (III+) Fast SRAM init		*/
+#define ASI_CORE_AVAILABLE	0x41 /* (CMT) LP Available		*/
+#define ASI_CORE_ENABLE_STAT	0x41 /* (CMT) LP Enable Status		*/
+#define ASI_CORE_ENABLE		0x41 /* (CMT) LP Enable RW		*/
+#define ASI_XIR_STEERING	0x41 /* (CMT) XIR Steering RW		*/
+#define ASI_CORE_RUNNING_RW	0x41 /* (CMT) LP Running RW		*/
+#define ASI_CORE_RUNNING_W1S	0x41 /* (CMT) LP Running Write-One Set	*/
+#define ASI_CORE_RUNNING_W1C	0x41 /* (CMT) LP Running Write-One Clr	*/
+#define ASI_CORE_RUNNING_STAT	0x41 /* (CMT) LP Running Status		*/
+#define ASI_CMT_ERROR_STEERING	0x41 /* (CMT) Error Steering RW		*/
+#define ASI_DCACHE_INVALIDATE	0x42 /* (III) DCache Invalidate diag	*/
+#define ASI_DCACHE_UTAG		0x43 /* (III) DCache uTag diag		*/
+#define ASI_DCACHE_SNOOP_TAG	0x44 /* (III) DCache snoop tag RAM diag	*/
+#define ASI_LSU_CONTROL		0x45 /* Load-store control unit		*/
+#define ASI_DCU_CONTROL_REG	0x45 /* (III) DCache Unit Control reg	*/
+#define ASI_DCACHE_DATA		0x46 /* DCache data-ram diag access	*/
+#define ASI_DCACHE_TAG		0x47 /* Dcache tag/valid ram diag access*/
+#define ASI_INTR_DISPATCH_STAT	0x48 /* IRQ vector dispatch status	*/
+#define ASI_INTR_RECEIVE	0x49 /* IRQ vector receive status	*/
+#define ASI_UPA_CONFIG		0x4a /* UPA config space		*/
+#define ASI_JBUS_CONFIG		0x4a /* (IIIi) JBUS Config Register	*/
+#define ASI_SAFARI_CONFIG	0x4a /* (III) Safari Config Register	*/
+#define ASI_SAFARI_ADDRESS	0x4a /* (III) Safari Address Register	*/
+#define ASI_ESTATE_ERROR_EN	0x4b /* E-cache error enable space	*/
+#define ASI_AFSR		0x4c /* Async fault status register	*/
+#define ASI_AFAR		0x4d /* Async fault address register	*/
+#define ASI_EC_TAG_DATA		0x4e /* E-cache tag/valid ram diag acc	*/
+#define ASI_IMMU		0x50 /* Insn-MMU main register space	*/
+#define ASI_IMMU_TSB_8KB_PTR	0x51 /* Insn-MMU 8KB TSB pointer reg	*/
+#define ASI_IMMU_TSB_64KB_PTR	0x52 /* Insn-MMU 64KB TSB pointer reg	*/
+#define ASI_ITLB_DATA_IN	0x54 /* Insn-MMU TLB data in reg	*/
+#define ASI_ITLB_DATA_ACCESS	0x55 /* Insn-MMU TLB data access reg	*/
+#define ASI_ITLB_TAG_READ	0x56 /* Insn-MMU TLB tag read reg	*/
+#define ASI_IMMU_DEMAP		0x57 /* Insn-MMU TLB demap		*/
+#define ASI_DMMU		0x58 /* Data-MMU main register space	*/
+#define ASI_DMMU_TSB_8KB_PTR	0x59 /* Data-MMU 8KB TSB pointer reg	*/
+#define ASI_DMMU_TSB_64KB_PTR	0x5a /* Data-MMU 16KB TSB pointer reg	*/
+#define ASI_DMMU_TSB_DIRECT_PTR	0x5b /* Data-MMU TSB direct pointer reg	*/
+#define ASI_DTLB_DATA_IN	0x5c /* Data-MMU TLB data in reg	*/
+#define ASI_DTLB_DATA_ACCESS	0x5d /* Data-MMU TLB data access reg	*/
+#define ASI_DTLB_TAG_READ	0x5e /* Data-MMU TLB tag read reg	*/
+#define ASI_DMMU_DEMAP		0x5f /* Data-MMU TLB demap		*/
+#define ASI_IIU_INST_TRAP	0x60 /* (III) Instruction Breakpoint	*/
+#define ASI_INTR_ID		0x63 /* (CMT) Interrupt ID register	*/
+#define ASI_CORE_ID		0x63 /* (CMT) LP ID register		*/
+#define ASI_CESR_ID		0x63 /* (CMT) CESR ID register		*/
+#define ASI_IC_INSTR		0x66 /* Insn cache instrucion ram diag	*/
+#define ASI_IC_TAG		0x67 /* Insn cache tag/valid ram diag 	*/
+#define ASI_IC_STAG		0x68 /* (III) Insn cache snoop tag ram	*/
+#define ASI_IC_PRE_DECODE	0x6e /* Insn cache pre-decode ram diag	*/
+#define ASI_IC_NEXT_FIELD	0x6f /* Insn cache next-field ram diag	*/
+#define ASI_BRPRED_ARRAY	0x6f /* (III) Branch Prediction RAM diag*/
+#define ASI_BLK_AIUP		0x70 /* Primary, user, block load/store	*/
+#define ASI_BLK_AIUS		0x71 /* Secondary, user, block ld/st	*/
+#define ASI_MCU_CTRL_REG	0x72 /* (III) Memory controller regs	*/
+#define ASI_EC_DATA		0x74 /* (III) E-cache data staging reg	*/
+#define ASI_EC_CTRL		0x75 /* (III) E-cache control reg	*/
+#define ASI_EC_W		0x76 /* E-cache diag write access	*/
+#define ASI_UDB_ERROR_W		0x77 /* External UDB error regs W	*/
+#define ASI_UDB_CONTROL_W	0x77 /* External UDB control regs W	*/
+#define ASI_INTR_W		0x77 /* IRQ vector dispatch write	*/
+#define ASI_INTR_DATAN_W	0x77 /* (III) Out irq vector data reg N	*/
+#define ASI_INTR_DISPATCH_W	0x77 /* (III) Interrupt vector dispatch	*/
+#define ASI_BLK_AIUPL		0x78 /* Primary, user, little, blk ld/st*/
+#define ASI_BLK_AIUSL		0x79 /* Secondary, user, little, blk ld/st*/
+#define ASI_EC_R		0x7e /* E-cache diag read access	*/
+#define ASI_UDBH_ERROR_R	0x7f /* External UDB error regs rd hi	*/
+#define ASI_UDBL_ERROR_R	0x7f /* External UDB error regs rd low	*/
+#define ASI_UDBH_CONTROL_R	0x7f /* External UDB control regs rd hi	*/
+#define ASI_UDBL_CONTROL_R	0x7f /* External UDB control regs rd low*/
+#define ASI_INTR_R		0x7f /* IRQ vector dispatch read	*/
+#define ASI_INTR_DATAN_R	0x7f /* (III) In irq vector data reg N	*/
+#define ASI_PST8_P		0xc0 /* Primary, 8 8-bit, partial	*/
+#define ASI_PST8_S		0xc1 /* Secondary, 8 8-bit, partial	*/
+#define ASI_PST16_P		0xc2 /* Primary, 4 16-bit, partial	*/
+#define ASI_PST16_S		0xc3 /* Secondary, 4 16-bit, partial	*/
+#define ASI_PST32_P		0xc4 /* Primary, 2 32-bit, partial	*/
+#define ASI_PST32_S		0xc5 /* Secondary, 2 32-bit, partial	*/
+#define ASI_PST8_PL		0xc8 /* Primary, 8 8-bit, partial, L	*/
+#define ASI_PST8_SL		0xc9 /* Secondary, 8 8-bit, partial, L	*/
+#define ASI_PST16_PL		0xca /* Primary, 4 16-bit, partial, L	*/
+#define ASI_PST16_SL		0xcb /* Secondary, 4 16-bit, partial, L	*/
+#define ASI_PST32_PL		0xcc /* Primary, 2 32-bit, partial, L	*/
+#define ASI_PST32_SL		0xcd /* Secondary, 2 32-bit, partial, L	*/
+#define ASI_FL8_P		0xd0 /* Primary, 1 8-bit, fpu ld/st	*/
+#define ASI_FL8_S		0xd1 /* Secondary, 1 8-bit, fpu ld/st	*/
+#define ASI_FL16_P		0xd2 /* Primary, 1 16-bit, fpu ld/st	*/
+#define ASI_FL16_S		0xd3 /* Secondary, 1 16-bit, fpu ld/st	*/
+#define ASI_FL8_PL		0xd8 /* Primary, 1 8-bit, fpu ld/st, L	*/
+#define ASI_FL8_SL		0xd9 /* Secondary, 1 8-bit, fpu ld/st, L*/
+#define ASI_FL16_PL		0xda /* Primary, 1 16-bit, fpu ld/st, L	*/
+#define ASI_FL16_SL		0xdb /* Secondary, 1 16-bit, fpu ld/st,L*/
+#define ASI_BLK_COMMIT_P	0xe0 /* Primary, blk store commit	*/
+#define ASI_BLK_COMMIT_S	0xe1 /* Secondary, blk store commit	*/
+#define ASI_BLK_INIT_QUAD_LDD_P	0xe2 /* (NG) init-store, twin load,
+				      * primary, implicit
+				      */
+#define ASI_BLK_P		0xf0 /* Primary, blk ld/st		*/
+#define ASI_BLK_S		0xf1 /* Secondary, blk ld/st		*/
+#define ASI_BLK_PL		0xf8 /* Primary, blk ld/st, little	*/
+#define ASI_BLK_SL		0xf9 /* Secondary, blk ld/st, little	*/
+
+#endif /* _SPARC_ASI_H */
diff --git a/arch/sparc/include/asm/asmmacro.h b/arch/sparc/include/asm/asmmacro.h
new file mode 100644
index 000000000000..a619a4d97aae
--- /dev/null
+++ b/arch/sparc/include/asm/asmmacro.h
@@ -0,0 +1,45 @@
+/* asmmacro.h: Assembler macros.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caipfs.rutgers.edu)
+ */
+
+#ifndef _SPARC_ASMMACRO_H
+#define _SPARC_ASMMACRO_H
+
+#include <asm/btfixup.h>
+#include <asm/asi.h>
+
+#define GET_PROCESSOR4M_ID(reg) \
+	rd	%tbr, %reg; \
+	srl	%reg, 12, %reg; \
+	and	%reg, 3, %reg;
+
+#define GET_PROCESSOR4D_ID(reg) \
+	lda	[%g0] ASI_M_VIKING_TMP1, %reg;
+
+/* All trap entry points _must_ begin with this macro or else you
+ * lose.  It makes sure the kernel has a proper window so that
+ * c-code can be called.
+ */
+#define SAVE_ALL_HEAD \
+	sethi	%hi(trap_setup), %l4; \
+	jmpl	%l4 + %lo(trap_setup), %l6;
+#define SAVE_ALL \
+	SAVE_ALL_HEAD \
+	 nop;
+
+/* All traps low-level code here must end with this macro. */
+#define RESTORE_ALL b ret_trap_entry; clr %l6;
+
+/* sun4 probably wants half word accesses to ASI_SEGMAP, while sun4c+
+   likes byte accesses. These are to avoid ifdef mania. */
+
+#ifdef CONFIG_SUN4
+#define lduXa	lduha
+#define stXa	stha
+#else
+#define lduXa	lduba
+#define stXa	stba
+#endif
+
+#endif /* !(_SPARC_ASMMACRO_H) */
diff --git a/arch/sparc/include/asm/atomic.h b/arch/sparc/include/asm/atomic.h
new file mode 100644
index 000000000000..8ff83d8cc33f
--- /dev/null
+++ b/arch/sparc/include/asm/atomic.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_ATOMIC_H
+#define ___ASM_SPARC_ATOMIC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/atomic_64.h>
+#else
+#include <asm/atomic_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/atomic_32.h b/arch/sparc/include/asm/atomic_32.h
new file mode 100644
index 000000000000..5c944b5a8040
--- /dev/null
+++ b/arch/sparc/include/asm/atomic_32.h
@@ -0,0 +1,165 @@
+/* atomic.h: These still suck, but the I-cache hit rate is higher.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 2000 Anton Blanchard (anton@linuxcare.com.au)
+ * Copyright (C) 2007 Kyle McMartin (kyle@parisc-linux.org)
+ *
+ * Additions by Keith M Wesolowski (wesolows@foobazco.org) based
+ * on asm-parisc/atomic.h Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>.
+ */
+
+#ifndef __ARCH_SPARC_ATOMIC__
+#define __ARCH_SPARC_ATOMIC__
+
+#include <linux/types.h>
+
+typedef struct { volatile int counter; } atomic_t;
+
+#ifdef __KERNEL__
+
+#define ATOMIC_INIT(i)  { (i) }
+
+extern int __atomic_add_return(int, atomic_t *);
+extern int atomic_cmpxchg(atomic_t *, int, int);
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+extern int atomic_add_unless(atomic_t *, int, int);
+extern void atomic_set(atomic_t *, int);
+
+#define atomic_read(v)          ((v)->counter)
+
+#define atomic_add(i, v)	((void)__atomic_add_return( (int)(i), (v)))
+#define atomic_sub(i, v)	((void)__atomic_add_return(-(int)(i), (v)))
+#define atomic_inc(v)		((void)__atomic_add_return(        1, (v)))
+#define atomic_dec(v)		((void)__atomic_add_return(       -1, (v)))
+
+#define atomic_add_return(i, v)	(__atomic_add_return( (int)(i), (v)))
+#define atomic_sub_return(i, v)	(__atomic_add_return(-(int)(i), (v)))
+#define atomic_inc_return(v)	(__atomic_add_return(        1, (v)))
+#define atomic_dec_return(v)	(__atomic_add_return(       -1, (v)))
+
+#define atomic_add_negative(a, v)	(atomic_add_return((a), (v)) < 0)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+#define atomic_dec_and_test(v) (atomic_dec_return(v) == 0)
+#define atomic_sub_and_test(i, v) (atomic_sub_return(i, v) == 0)
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+/* This is the old 24-bit implementation.  It's still used internally
+ * by some sparc-specific code, notably the semaphore implementation.
+ */
+typedef struct { volatile int counter; } atomic24_t;
+
+#ifndef CONFIG_SMP
+
+#define ATOMIC24_INIT(i)  { (i) }
+#define atomic24_read(v)          ((v)->counter)
+#define atomic24_set(v, i)        (((v)->counter) = i)
+
+#else
+/* We do the bulk of the actual work out of line in two common
+ * routines in assembler, see arch/sparc/lib/atomic.S for the
+ * "fun" details.
+ *
+ * For SMP the trick is you embed the spin lock byte within
+ * the word, use the low byte so signedness is easily retained
+ * via a quick arithmetic shift.  It looks like this:
+ *
+ *	----------------------------------------
+ *	| signed 24-bit counter value |  lock  |  atomic_t
+ *	----------------------------------------
+ *	 31                          8 7      0
+ */
+
+#define ATOMIC24_INIT(i)	{ ((i) << 8) }
+
+static inline int atomic24_read(const atomic24_t *v)
+{
+	int ret = v->counter;
+
+	while(ret & 0xff)
+		ret = v->counter;
+
+	return ret >> 8;
+}
+
+#define atomic24_set(v, i)	(((v)->counter) = ((i) << 8))
+#endif
+
+static inline int __atomic24_add(int i, atomic24_t *v)
+{
+	register volatile int *ptr asm("g1");
+	register int increment asm("g2");
+	register int tmp1 asm("g3");
+	register int tmp2 asm("g4");
+	register int tmp3 asm("g7");
+
+	ptr = &v->counter;
+	increment = i;
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___atomic24_add\n\t"
+	" add	%%o7, 8, %%o7\n"
+	: "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3)
+	: "0" (increment), "r" (ptr)
+	: "memory", "cc");
+
+	return increment;
+}
+
+static inline int __atomic24_sub(int i, atomic24_t *v)
+{
+	register volatile int *ptr asm("g1");
+	register int increment asm("g2");
+	register int tmp1 asm("g3");
+	register int tmp2 asm("g4");
+	register int tmp3 asm("g7");
+
+	ptr = &v->counter;
+	increment = i;
+
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___atomic24_sub\n\t"
+	" add	%%o7, 8, %%o7\n"
+	: "=&r" (increment), "=r" (tmp1), "=r" (tmp2), "=r" (tmp3)
+	: "0" (increment), "r" (ptr)
+	: "memory", "cc");
+
+	return increment;
+}
+
+#define atomic24_add(i, v) ((void)__atomic24_add((i), (v)))
+#define atomic24_sub(i, v) ((void)__atomic24_sub((i), (v)))
+
+#define atomic24_dec_return(v) __atomic24_sub(1, (v))
+#define atomic24_inc_return(v) __atomic24_add(1, (v))
+
+#define atomic24_sub_and_test(i, v) (__atomic24_sub((i), (v)) == 0)
+#define atomic24_dec_and_test(v) (__atomic24_sub(1, (v)) == 0)
+
+#define atomic24_inc(v) ((void)__atomic24_add(1, (v)))
+#define atomic24_dec(v) ((void)__atomic24_sub(1, (v)))
+
+#define atomic24_add_negative(i, v) (__atomic24_add((i), (v)) < 0)
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif /* !(__KERNEL__) */
+
+#include <asm-generic/atomic.h>
+#endif /* !(__ARCH_SPARC_ATOMIC__) */
diff --git a/arch/sparc/include/asm/atomic_64.h b/arch/sparc/include/asm/atomic_64.h
new file mode 100644
index 000000000000..2c71ec4a3b18
--- /dev/null
+++ b/arch/sparc/include/asm/atomic_64.h
@@ -0,0 +1,128 @@
+/* atomic.h: Thankfully the V9 is at least reasonable for this
+ *           stuff.
+ *
+ * Copyright (C) 1996, 1997, 2000 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef __ARCH_SPARC64_ATOMIC__
+#define __ARCH_SPARC64_ATOMIC__
+
+#include <linux/types.h>
+#include <asm/system.h>
+
+typedef struct { volatile int counter; } atomic_t;
+typedef struct { volatile __s64 counter; } atomic64_t;
+
+#define ATOMIC_INIT(i)		{ (i) }
+#define ATOMIC64_INIT(i)	{ (i) }
+
+#define atomic_read(v)		((v)->counter)
+#define atomic64_read(v)	((v)->counter)
+
+#define atomic_set(v, i)	(((v)->counter) = i)
+#define atomic64_set(v, i)	(((v)->counter) = i)
+
+extern void atomic_add(int, atomic_t *);
+extern void atomic64_add(int, atomic64_t *);
+extern void atomic_sub(int, atomic_t *);
+extern void atomic64_sub(int, atomic64_t *);
+
+extern int atomic_add_ret(int, atomic_t *);
+extern int atomic64_add_ret(int, atomic64_t *);
+extern int atomic_sub_ret(int, atomic_t *);
+extern int atomic64_sub_ret(int, atomic64_t *);
+
+#define atomic_dec_return(v) atomic_sub_ret(1, v)
+#define atomic64_dec_return(v) atomic64_sub_ret(1, v)
+
+#define atomic_inc_return(v) atomic_add_ret(1, v)
+#define atomic64_inc_return(v) atomic64_add_ret(1, v)
+
+#define atomic_sub_return(i, v) atomic_sub_ret(i, v)
+#define atomic64_sub_return(i, v) atomic64_sub_ret(i, v)
+
+#define atomic_add_return(i, v) atomic_add_ret(i, v)
+#define atomic64_add_return(i, v) atomic64_add_ret(i, v)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+#define atomic64_inc_and_test(v) (atomic64_inc_return(v) == 0)
+
+#define atomic_sub_and_test(i, v) (atomic_sub_ret(i, v) == 0)
+#define atomic64_sub_and_test(i, v) (atomic64_sub_ret(i, v) == 0)
+
+#define atomic_dec_and_test(v) (atomic_sub_ret(1, v) == 0)
+#define atomic64_dec_and_test(v) (atomic64_sub_ret(1, v) == 0)
+
+#define atomic_inc(v) atomic_add(1, v)
+#define atomic64_inc(v) atomic64_add(1, v)
+
+#define atomic_dec(v) atomic_sub(1, v)
+#define atomic64_dec(v) atomic64_sub(1, v)
+
+#define atomic_add_negative(i, v) (atomic_add_ret(i, v) < 0)
+#define atomic64_add_negative(i, v) (atomic64_add_ret(i, v) < 0)
+
+#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static inline int atomic_add_unless(atomic_t *v, int a, int u)
+{
+	int c, old;
+	c = atomic_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic64_cmpxchg(v, o, n) \
+	((__typeof__((v)->counter))cmpxchg(&((v)->counter), (o), (n)))
+#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))
+
+static inline int atomic64_add_unless(atomic64_t *v, long a, long u)
+{
+	long c, old;
+	c = atomic64_read(v);
+	for (;;) {
+		if (unlikely(c == (u)))
+			break;
+		old = atomic64_cmpxchg((v), c, c + (a));
+		if (likely(old == c))
+			break;
+		c = old;
+	}
+	return c != (u);
+}
+
+#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
+
+/* Atomic operations are already serializing */
+#ifdef CONFIG_SMP
+#define smp_mb__before_atomic_dec()	membar_storeload_loadload();
+#define smp_mb__after_atomic_dec()	membar_storeload_storestore();
+#define smp_mb__before_atomic_inc()	membar_storeload_loadload();
+#define smp_mb__after_atomic_inc()	membar_storeload_storestore();
+#else
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+#endif
+
+#include <asm-generic/atomic.h>
+#endif /* !(__ARCH_SPARC64_ATOMIC__) */
diff --git a/arch/sparc/include/asm/auxio.h b/arch/sparc/include/asm/auxio.h
new file mode 100644
index 000000000000..13dc67f03011
--- /dev/null
+++ b/arch/sparc/include/asm/auxio.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_AUXIO_H
+#define ___ASM_SPARC_AUXIO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/auxio_64.h>
+#else
+#include <asm/auxio_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/auxio_32.h b/arch/sparc/include/asm/auxio_32.h
new file mode 100644
index 000000000000..e03e088be95f
--- /dev/null
+++ b/arch/sparc/include/asm/auxio_32.h
@@ -0,0 +1,89 @@
+/*
+ * auxio.h:  Definitions and code for the Auxiliary I/O register.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_AUXIO_H
+#define _SPARC_AUXIO_H
+
+#include <asm/system.h>
+#include <asm/vaddrs.h>
+
+/* This register is an unsigned char in IO space.  It does two things.
+ * First, it is used to control the front panel LED light on machines
+ * that have it (good for testing entry points to trap handlers and irq's)
+ * Secondly, it controls various floppy drive parameters.
+ */
+#define AUXIO_ORMEIN      0xf0    /* All writes must set these bits. */
+#define AUXIO_ORMEIN4M    0xc0    /* sun4m - All writes must set these bits. */
+#define AUXIO_FLPY_DENS   0x20    /* Floppy density, high if set. Read only. */
+#define AUXIO_FLPY_DCHG   0x10    /* A disk change occurred.  Read only. */
+#define AUXIO_EDGE_ON     0x10    /* sun4m - On means Jumper block is in. */
+#define AUXIO_FLPY_DSEL   0x08    /* Drive select/start-motor. Write only. */
+#define AUXIO_LINK_TEST   0x08    /* sun4m - On means TPE Carrier detect. */
+
+/* Set the following to one, then zero, after doing a pseudo DMA transfer. */
+#define AUXIO_FLPY_TCNT   0x04    /* Floppy terminal count. Write only. */
+
+/* Set the following to zero to eject the floppy. */
+#define AUXIO_FLPY_EJCT   0x02    /* Eject floppy disk.  Write only. */
+#define AUXIO_LED         0x01    /* On if set, off if unset. Read/Write */
+
+#ifndef __ASSEMBLY__
+
+/*
+ * NOTE: these routines are implementation dependent--
+ * understand the hardware you are querying!
+ */
+extern void set_auxio(unsigned char bits_on, unsigned char bits_off);
+extern unsigned char get_auxio(void); /* .../asm/floppy.h */
+
+/*
+ * The following routines are provided for driver-compatibility
+ * with sparc64 (primarily sunlance.c)
+ */
+
+#define AUXIO_LTE_ON    1
+#define AUXIO_LTE_OFF   0
+
+/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
+ *
+ * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
+ */
+#define auxio_set_lte(on) \
+do { \
+	if(on) { \
+		set_auxio(AUXIO_LINK_TEST, 0); \
+	} else { \
+		set_auxio(0, AUXIO_LINK_TEST); \
+	} \
+} while (0)
+
+#define AUXIO_LED_ON    1
+#define AUXIO_LED_OFF   0
+
+/* auxio_set_led - Set system front panel LED
+ *
+ * on - AUXIO_LED_ON or AUXIO_LED_OFF
+ */
+#define auxio_set_led(on) \
+do { \
+	if(on) { \
+		set_auxio(AUXIO_LED, 0); \
+	} else { \
+		set_auxio(0, AUXIO_LED); \
+	} \
+} while (0)
+
+#endif /* !(__ASSEMBLY__) */
+
+
+/* AUXIO2 (Power Off Control) */
+extern __volatile__ unsigned char * auxio_power_register;
+
+#define	AUXIO_POWER_DETECT_FAILURE	32
+#define	AUXIO_POWER_CLEAR_FAILURE	2
+#define	AUXIO_POWER_OFF			1
+
+
+#endif /* !(_SPARC_AUXIO_H) */
diff --git a/arch/sparc/include/asm/auxio_64.h b/arch/sparc/include/asm/auxio_64.h
new file mode 100644
index 000000000000..f61cd1e3e395
--- /dev/null
+++ b/arch/sparc/include/asm/auxio_64.h
@@ -0,0 +1,100 @@
+/*
+ * auxio.h:  Definitions and code for the Auxiliary I/O registers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Refactoring for unified NCR/PCIO support 2002 Eric Brower (ebrower@usa.net)
+ */
+#ifndef _SPARC64_AUXIO_H
+#define _SPARC64_AUXIO_H
+
+/* AUXIO implementations:
+ * sbus-based NCR89C105 "Slavio"
+ *	LED/Floppy (AUX1) register
+ *	Power (AUX2) register
+ *
+ * ebus-based auxio on PCIO
+ *	LED Auxio Register
+ *	Power Auxio Register
+ *
+ * Register definitions from NCR _NCR89C105 Chip Specification_
+ *
+ * SLAVIO AUX1 @ 0x1900000
+ * -------------------------------------------------
+ * | (R) | (R) |  D  | (R) |  E  |  M  |  T  |  L  |
+ * -------------------------------------------------
+ * (R) - bit 7:6,4 are reserved and should be masked in s/w
+ *  D  - Floppy Density Sense (1=high density) R/O
+ *  E  - Link Test Enable, directly reflected on AT&T 7213 LTE pin
+ *  M  - Monitor/Mouse Mux, directly reflected on MON_MSE_MUX pin
+ *  T  - Terminal Count: sends TC pulse to 82077 floppy controller
+ *  L  - System LED on front panel (0=off, 1=on)
+ */
+#define AUXIO_AUX1_MASK		0xc0 /* Mask bits 		*/
+#define AUXIO_AUX1_FDENS	0x20 /* Floppy Density Sense	*/
+#define AUXIO_AUX1_LTE 		0x08 /* Link Test Enable 	*/
+#define AUXIO_AUX1_MMUX		0x04 /* Monitor/Mouse Mux	*/
+#define AUXIO_AUX1_FTCNT	0x02 /* Terminal Count, 	*/
+#define AUXIO_AUX1_LED		0x01 /* System LED		*/
+
+/* SLAVIO AUX2 @ 0x1910000
+ * -------------------------------------------------
+ * | (R) | (R) |  D  | (R) | (R) | (R) |  C  |  F  |
+ * -------------------------------------------------
+ * (R) - bits 7:6,4:2 are reserved and should be masked in s/w
+ *  D  - Power Failure Detect (1=power fail)
+ *  C  - Clear Power Failure Detect Int (1=clear)
+ *  F  - Power Off (1=power off)
+ */
+#define AUXIO_AUX2_MASK		0xdc /* Mask Bits		*/
+#define AUXIO_AUX2_PFAILDET	0x20 /* Power Fail Detect	*/
+#define AUXIO_AUX2_PFAILCLR 	0x02 /* Clear Pwr Fail Det Intr	*/
+#define AUXIO_AUX2_PWR_OFF	0x01 /* Power Off		*/
+
+/* Register definitions from Sun Microsystems _PCIO_ p/n 802-7837
+ *
+ * PCIO LED Auxio @ 0x726000
+ * -------------------------------------------------
+ * |             31:1 Unused                 | LED |
+ * -------------------------------------------------
+ * Bits 31:1 unused
+ * LED - System LED on front panel (0=off, 1=on)
+ */
+#define AUXIO_PCIO_LED		0x01 /* System LED 		*/
+
+/* PCIO Power Auxio @ 0x724000
+ * -------------------------------------------------
+ * |             31:2 Unused           | CPO | SPO |
+ * -------------------------------------------------
+ * Bits 31:2 unused
+ * CPO - Courtesy Power Off (1=off)
+ * SPO - System Power Off   (1=off)
+ */
+#define AUXIO_PCIO_CPWR_OFF	0x02 /* Courtesy Power Off	*/
+#define AUXIO_PCIO_SPWR_OFF	0x01 /* System Power Off	*/
+
+#ifndef __ASSEMBLY__
+
+extern void __iomem *auxio_register;
+
+#define AUXIO_LTE_ON	1
+#define AUXIO_LTE_OFF	0
+
+/* auxio_set_lte - Set Link Test Enable (TPE Link Detect)
+ *
+ * on - AUXIO_LTE_ON or AUXIO_LTE_OFF
+ */
+extern void auxio_set_lte(int on);
+
+#define AUXIO_LED_ON	1
+#define AUXIO_LED_OFF	0
+
+/* auxio_set_led - Set system front panel LED
+ *
+ * on - AUXIO_LED_ON or AUXIO_LED_OFF
+ */
+extern void auxio_set_led(int on);
+
+#endif /* ifndef __ASSEMBLY__ */
+
+#endif /* !(_SPARC64_AUXIO_H) */
diff --git a/arch/sparc/include/asm/auxvec.h b/arch/sparc/include/asm/auxvec.h
new file mode 100644
index 000000000000..ad6f360261f6
--- /dev/null
+++ b/arch/sparc/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASMSPARC_AUXVEC_H
+#define __ASMSPARC_AUXVEC_H
+
+#endif /* !(__ASMSPARC_AUXVEC_H) */
diff --git a/arch/sparc/include/asm/backoff.h b/arch/sparc/include/asm/backoff.h
new file mode 100644
index 000000000000..fa1fdf67e350
--- /dev/null
+++ b/arch/sparc/include/asm/backoff.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC64_BACKOFF_H
+#define _SPARC64_BACKOFF_H
+
+#define BACKOFF_LIMIT	(4 * 1024)
+
+#ifdef CONFIG_SMP
+
+#define BACKOFF_SETUP(reg)	\
+	mov	1, reg
+
+#define BACKOFF_SPIN(reg, tmp, label)	\
+	mov	reg, tmp; \
+88:	brnz,pt	tmp, 88b; \
+	 sub	tmp, 1, tmp; \
+	set	BACKOFF_LIMIT, tmp; \
+	cmp	reg, tmp; \
+	bg,pn	%xcc, label; \
+	 nop; \
+	ba,pt	%xcc, label; \
+	 sllx	reg, 1, reg;
+
+#else
+
+#define BACKOFF_SETUP(reg)
+#define BACKOFF_SPIN(reg, tmp, label) \
+	ba,pt	%xcc, label; \
+	 nop;
+
+#endif
+
+#endif /* _SPARC64_BACKOFF_H */
diff --git a/arch/sparc/include/asm/bbc.h b/arch/sparc/include/asm/bbc.h
new file mode 100644
index 000000000000..423a85800aae
--- /dev/null
+++ b/arch/sparc/include/asm/bbc.h
@@ -0,0 +1,225 @@
+/*
+ * bbc.h: Defines for BootBus Controller found on UltraSPARC-III
+ *        systems.
+ *
+ * Copyright (C) 2000 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _SPARC64_BBC_H
+#define _SPARC64_BBC_H
+
+/* Register sizes are indicated by "B" (Byte, 1-byte),
+ * "H" (Half-word, 2 bytes), "W" (Word, 4 bytes) or
+ * "Q" (Quad, 8 bytes) inside brackets.
+ */
+
+#define BBC_AID		0x00	/* [B] Agent ID			*/
+#define BBC_DEVP	0x01	/* [B] Device Present		*/
+#define BBC_ARB		0x02	/* [B] Arbitration		*/
+#define BBC_QUIESCE	0x03	/* [B] Quiesce			*/
+#define BBC_WDACTION	0x04	/* [B] Watchdog Action		*/
+#define BBC_SPG		0x06	/* [B] Soft POR Gen		*/
+#define BBC_SXG		0x07	/* [B] Soft XIR Gen		*/
+#define BBC_PSRC	0x08	/* [W] POR Source		*/
+#define BBC_XSRC	0x0c	/* [B] XIR Source		*/
+#define BBC_CSC		0x0d	/* [B] Clock Synthesizers Control*/
+#define BBC_ES_CTRL	0x0e	/* [H] Energy Star Control	*/
+#define BBC_ES_ACT	0x10	/* [W] E* Assert Change Time	*/
+#define BBC_ES_DACT	0x14	/* [B] E* De-Assert Change Time	*/
+#define BBC_ES_DABT	0x15	/* [B] E* De-Assert Bypass Time	*/
+#define BBC_ES_ABT	0x16	/* [H] E* Assert Bypass Time	*/
+#define BBC_ES_PST	0x18	/* [W] E* PLL Settle Time	*/
+#define BBC_ES_FSL	0x1c	/* [W] E* Frequency Switch Latency*/
+#define BBC_EBUST	0x20	/* [Q] EBUS Timing		*/
+#define BBC_JTAG_CMD	0x28	/* [W] JTAG+ Command		*/
+#define BBC_JTAG_CTRL	0x2c	/* [B] JTAG+ Control		*/
+#define BBC_I2C_SEL	0x2d	/* [B] I2C Selection		*/
+#define BBC_I2C_0_S1	0x2e	/* [B] I2C ctrlr-0 reg S1	*/
+#define BBC_I2C_0_S0	0x2f	/* [B] I2C ctrlr-0 regs S0,S0',S2,S3*/
+#define BBC_I2C_1_S1	0x30	/* [B] I2C ctrlr-1 reg S1	*/
+#define BBC_I2C_1_S0	0x31	/* [B] I2C ctrlr-1 regs S0,S0',S2,S3*/
+#define BBC_KBD_BEEP	0x32	/* [B] Keyboard Beep		*/
+#define BBC_KBD_BCNT	0x34	/* [W] Keyboard Beep Counter	*/
+
+#define BBC_REGS_SIZE	0x40
+
+/* There is a 2K scratch ram area at offset 0x80000 but I doubt
+ * we will use it for anything.
+ */
+
+/* Agent ID register.  This register shows the Safari Agent ID
+ * for the processors.  The value returned depends upon which
+ * cpu is reading the register.
+ */
+#define BBC_AID_ID	0x07	/* Safari ID		*/
+#define BBC_AID_RESV	0xf8	/* Reserved		*/
+
+/* Device Present register.  One can determine which cpus are actually
+ * present in the machine by interrogating this register.
+ */
+#define BBC_DEVP_CPU0	0x01	/* Processor 0 present	*/
+#define BBC_DEVP_CPU1	0x02	/* Processor 1 present	*/
+#define BBC_DEVP_CPU2	0x04	/* Processor 2 present	*/
+#define BBC_DEVP_CPU3	0x08	/* Processor 3 present	*/
+#define BBC_DEVP_RESV	0xf0	/* Reserved		*/
+
+/* Arbitration register.  This register is used to block access to
+ * the BBC from a particular cpu.
+ */
+#define BBC_ARB_CPU0	0x01	/* Enable cpu 0 BBC arbitratrion */
+#define BBC_ARB_CPU1	0x02	/* Enable cpu 1 BBC arbitratrion */
+#define BBC_ARB_CPU2	0x04	/* Enable cpu 2 BBC arbitratrion */
+#define BBC_ARB_CPU3	0x08	/* Enable cpu 3 BBC arbitratrion */
+#define BBC_ARB_RESV	0xf0	/* Reserved			 */
+
+/* Quiesce register.  Bus and BBC segments for cpus can be disabled
+ * with this register, ie. for hot plugging.
+ */
+#define BBC_QUIESCE_S02	0x01	/* Quiesce Safari segment for cpu 0 and 2 */
+#define BBC_QUIESCE_S13	0x02	/* Quiesce Safari segment for cpu 1 and 3 */
+#define BBC_QUIESCE_B02	0x04	/* Quiesce BBC segment for cpu 0 and 2    */
+#define BBC_QUIESCE_B13	0x08	/* Quiesce BBC segment for cpu 1 and 3    */
+#define BBC_QUIESCE_FD0 0x10	/* Disable Fatal_Error[0] reporting	  */
+#define BBC_QUIESCE_FD1 0x20	/* Disable Fatal_Error[1] reporting	  */
+#define BBC_QUIESCE_FD2 0x40	/* Disable Fatal_Error[2] reporting	  */
+#define BBC_QUIESCE_FD3 0x80	/* Disable Fatal_Error[3] reporting	  */
+
+/* Watchdog Action register.  When the watchdog device timer expires
+ * a line is enabled to the BBC.  The action BBC takes when this line
+ * is asserted can be controlled by this regiser.
+ */
+#define BBC_WDACTION_RST  0x01	/* When set, watchdog causes system reset.
+				 * When clear, BBC ignores watchdog signal.
+				 */
+#define BBC_WDACTION_RESV 0xfe	/* Reserved */
+
+/* Soft_POR_GEN register.  The POR (Power On Reset) signal may be asserted
+ * for specific processors or all processors via this register.
+ */
+#define BBC_SPG_CPU0	0x01 /* Assert POR for processor 0	*/
+#define BBC_SPG_CPU1	0x02 /* Assert POR for processor 1	*/
+#define BBC_SPG_CPU2	0x04 /* Assert POR for processor 2	*/
+#define BBC_SPG_CPU3	0x08 /* Assert POR for processor 3	*/
+#define BBC_SPG_CPUALL	0x10 /* Reset all processors and reset
+			      * the entire system.
+			      */
+#define BBC_SPG_RESV	0xe0 /* Reserved			*/
+
+/* Soft_XIR_GEN register.  The XIR (eXternally Initiated Reset) signal
+ * may be asserted to specific processors via this register.
+ */
+#define BBC_SXG_CPU0	0x01 /* Assert XIR for processor 0	*/
+#define BBC_SXG_CPU1	0x02 /* Assert XIR for processor 1	*/
+#define BBC_SXG_CPU2	0x04 /* Assert XIR for processor 2	*/
+#define BBC_SXG_CPU3	0x08 /* Assert XIR for processor 3	*/
+#define BBC_SXG_RESV	0xf0 /* Reserved			*/
+
+/* POR Source register.  One may identify the cause of the most recent
+ * reset by reading this register.
+ */
+#define BBC_PSRC_SPG0	0x0001 /* CPU 0 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPG1	0x0002 /* CPU 1 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPG2	0x0004 /* CPU 2 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPG3	0x0008 /* CPU 3 reset via BBC_SPG register	*/
+#define BBC_PSRC_SPGSYS	0x0010 /* System reset via BBC_SPG register	*/
+#define BBC_PSRC_JTAG	0x0020 /* System reset via JTAG+		*/
+#define BBC_PSRC_BUTTON	0x0040 /* System reset via push-button dongle	*/
+#define BBC_PSRC_PWRUP	0x0080 /* System reset via power-up		*/
+#define BBC_PSRC_FE0	0x0100 /* CPU 0 reported Fatal_Error		*/
+#define BBC_PSRC_FE1	0x0200 /* CPU 1 reported Fatal_Error		*/
+#define BBC_PSRC_FE2	0x0400 /* CPU 2 reported Fatal_Error		*/
+#define BBC_PSRC_FE3	0x0800 /* CPU 3 reported Fatal_Error		*/
+#define BBC_PSRC_FE4	0x1000 /* Schizo reported Fatal_Error		*/
+#define BBC_PSRC_FE5	0x2000 /* Safari device 5 reported Fatal_Error	*/
+#define BBC_PSRC_FE6	0x4000 /* CPMS reported Fatal_Error		*/
+#define BBC_PSRC_SYNTH	0x8000 /* System reset when on-board clock synthesizers
+				* were updated.
+				*/
+#define BBC_PSRC_WDT   0x10000 /* System reset via Super I/O watchdog	*/
+#define BBC_PSRC_RSC   0x20000 /* System reset via RSC remote monitoring
+				* device
+				*/
+
+/* XIR Source register.  The source of an XIR event sent to a processor may
+ * be determined via this register.
+ */
+#define BBC_XSRC_SXG0	0x01	/* CPU 0 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG1	0x02	/* CPU 1 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG2	0x04	/* CPU 2 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_SXG3	0x08	/* CPU 3 received XIR via Soft_XIR_GEN reg */
+#define BBC_XSRC_JTAG	0x10	/* All CPUs received XIR via JTAG+         */
+#define BBC_XSRC_W_OR_B	0x20	/* All CPUs received XIR either because:
+				 * a) Super I/O watchdog fired, or
+				 * b) XIR push button was activated
+				 */
+#define BBC_XSRC_RESV	0xc0	/* Reserved				   */
+
+/* Clock Synthesizers Control register.  This register provides the big-bang
+ * programming interface to the two clock synthesizers of the machine.
+ */
+#define BBC_CSC_SLOAD	0x01	/* Directly connected to S_LOAD pins	*/
+#define BBC_CSC_SDATA	0x02	/* Directly connected to S_DATA pins	*/
+#define BBC_CSC_SCLOCK	0x04	/* Directly connected to S_CLOCK pins	*/
+#define BBC_CSC_RESV	0x78	/* Reserved				*/
+#define BBC_CSC_RST	0x80	/* Generate system reset when S_LOAD==1	*/
+
+/* Energy Star Control register.  This register is used to generate the
+ * clock frequency change trigger to the main system devices (Schizo and
+ * the processors).  The transition occurs when bits in this register
+ * go from 0 to 1, only one bit must be set at once else no action
+ * occurs.  Basically the sequence of events is:
+ * a) Choose new frequency: full, 1/2 or 1/32
+ * b) Program this desired frequency into the cpus and Schizo.
+ * c) Set the same value in this register.
+ * d) 16 system clocks later, clear this register.
+ */
+#define BBC_ES_CTRL_1_1		0x01	/* Full frequency	*/
+#define BBC_ES_CTRL_1_2		0x02	/* 1/2 frequency	*/
+#define BBC_ES_CTRL_1_32	0x20	/* 1/32 frequency	*/
+#define BBC_ES_RESV		0xdc	/* Reserved		*/
+
+/* Energy Star Assert Change Time register.  This determines the number
+ * of BBC clock cycles (which is half the system frequency) between
+ * the detection of FREEZE_ACK being asserted and the assertion of
+ * the CLK_CHANGE_L[2:0] signals.
+ */
+#define BBC_ES_ACT_VAL	0xff
+
+/* Energy Star Assert Bypass Time register.  This determines the number
+ * of BBC clock cycles (which is half the system frequency) between
+ * the assertion of the CLK_CHANGE_L[2:0] signals and the assertion of
+ * the ESTAR_PLL_BYPASS signal.
+ */
+#define BBC_ES_ABT_VAL	0xffff
+
+/* Energy Star PLL Settle Time register.  This determines the number of
+ * BBC clock cycles (which is half the system frequency) between the
+ * de-assertion of CLK_CHANGE_L[2:0] and the de-assertion of the FREEZE_L
+ * signal.
+ */
+#define BBC_ES_PST_VAL	0xffffffff
+
+/* Energy Star Frequency Switch Latency register.  This is the number of
+ * BBC clocks between the de-assertion of CLK_CHANGE_L[2:0] and the first
+ * edge of the Safari clock at the new frequency.
+ */
+#define BBC_ES_FSL_VAL	0xffffffff
+
+/* Keyboard Beep control register.  This is a simple enabler for the audio
+ * beep sound.
+ */
+#define BBC_KBD_BEEP_ENABLE	0x01 /* Enable beep	*/
+#define BBC_KBD_BEEP_RESV	0xfe /* Reserved	*/
+
+/* Keyboard Beep Counter register.  There is a free-running counter inside
+ * the BBC which runs at half the system clock.  The bit set in this register
+ * determines when the audio sound is generated.  So for example if bit
+ * 10 is set, the audio beep will oscillate at 1/(2**12).  The keyboard beep
+ * generator automatically selects a different bit to use if the system clock
+ * is changed via Energy Star.
+ */
+#define BBC_KBD_BCNT_BITS	0x0007fc00
+#define BBC_KBC_BCNT_RESV	0xfff803ff
+
+#endif /* _SPARC64_BBC_H */
+
diff --git a/arch/sparc/include/asm/bitext.h b/arch/sparc/include/asm/bitext.h
new file mode 100644
index 000000000000..297b2f2fcb49
--- /dev/null
+++ b/arch/sparc/include/asm/bitext.h
@@ -0,0 +1,27 @@
+/*
+ * bitext.h: Bit string operations on the sparc, specific to architecture.
+ *
+ * Copyright 2002 Pete Zaitcev <zaitcev@yahoo.com>
+ */
+
+#ifndef _SPARC_BITEXT_H
+#define _SPARC_BITEXT_H
+
+#include <linux/spinlock.h>
+
+struct bit_map {
+	spinlock_t lock;
+	unsigned long *map;
+	int size;
+	int used;
+	int last_off;
+	int last_size;
+	int first_free;
+	int num_colors;
+};
+
+extern int bit_map_string_get(struct bit_map *t, int len, int align);
+extern void bit_map_clear(struct bit_map *t, int offset, int len);
+extern void bit_map_init(struct bit_map *t, unsigned long *map, int size);
+
+#endif /* defined(_SPARC_BITEXT_H) */
diff --git a/arch/sparc/include/asm/bitops.h b/arch/sparc/include/asm/bitops.h
new file mode 100644
index 000000000000..b1edd94bd64f
--- /dev/null
+++ b/arch/sparc/include/asm/bitops.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_BITOPS_H
+#define ___ASM_SPARC_BITOPS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/bitops_64.h>
+#else
+#include <asm/bitops_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/bitops_32.h b/arch/sparc/include/asm/bitops_32.h
new file mode 100644
index 000000000000..68b98a7e6454
--- /dev/null
+++ b/arch/sparc/include/asm/bitops_32.h
@@ -0,0 +1,111 @@
+/*
+ * bitops.h: Bit string operations on the Sparc.
+ *
+ * Copyright 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright 1996 Eddie C. Dost   (ecd@skynet.be)
+ * Copyright 2001 Anton Blanchard (anton@samba.org)
+ */
+
+#ifndef _SPARC_BITOPS_H
+#define _SPARC_BITOPS_H
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+extern unsigned long ___set_bit(unsigned long *addr, unsigned long mask);
+extern unsigned long ___clear_bit(unsigned long *addr, unsigned long mask);
+extern unsigned long ___change_bit(unsigned long *addr, unsigned long mask);
+
+/*
+ * Set bit 'nr' in 32-bit quantity at address 'addr' where bit '0'
+ * is in the highest of the four bytes and bit '31' is the high bit
+ * within the first byte. Sparc is BIG-Endian. Unless noted otherwise
+ * all bit-ops return 0 if bit was previously clear and != 0 otherwise.
+ */
+static inline int test_and_set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	return ___set_bit(ADDR, mask) != 0;
+}
+
+static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	(void) ___set_bit(ADDR, mask);
+}
+
+static inline int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	return ___clear_bit(ADDR, mask) != 0;
+}
+
+static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	(void) ___clear_bit(ADDR, mask);
+}
+
+static inline int test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	return ___change_bit(ADDR, mask) != 0;
+}
+
+static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	unsigned long *ADDR, mask;
+
+	ADDR = ((unsigned long *) addr) + (nr >> 5);
+	mask = 1 << (nr & 31);
+
+	(void) ___change_bit(ADDR, mask);
+}
+
+#include <asm-generic/bitops/non-atomic.h>
+
+#define smp_mb__before_clear_bit()	do { } while(0)
+#define smp_mb__after_clear_bit()	do { } while(0)
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/ext2-non-atomic.h>
+#include <asm-generic/bitops/ext2-atomic.h>
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(_SPARC_BITOPS_H) */
diff --git a/arch/sparc/include/asm/bitops_64.h b/arch/sparc/include/asm/bitops_64.h
new file mode 100644
index 000000000000..bb87b8080220
--- /dev/null
+++ b/arch/sparc/include/asm/bitops_64.h
@@ -0,0 +1,107 @@
+/*
+ * bitops.h: Bit string operations on the V9.
+ *
+ * Copyright 1996, 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_BITOPS_H
+#define _SPARC64_BITOPS_H
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>
+
+extern int test_and_set_bit(unsigned long nr, volatile unsigned long *addr);
+extern int test_and_clear_bit(unsigned long nr, volatile unsigned long *addr);
+extern int test_and_change_bit(unsigned long nr, volatile unsigned long *addr);
+extern void set_bit(unsigned long nr, volatile unsigned long *addr);
+extern void clear_bit(unsigned long nr, volatile unsigned long *addr);
+extern void change_bit(unsigned long nr, volatile unsigned long *addr);
+
+#include <asm-generic/bitops/non-atomic.h>
+
+#ifdef CONFIG_SMP
+#define smp_mb__before_clear_bit()	membar_storeload_loadload()
+#define smp_mb__after_clear_bit()	membar_storeload_storestore()
+#else
+#define smp_mb__before_clear_bit()	barrier()
+#define smp_mb__after_clear_bit()	barrier()
+#endif
+
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffs.h>
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+
+#ifdef ULTRA_HAS_POPULATION_COUNT
+
+static inline unsigned int hweight64(unsigned long w)
+{
+	unsigned int res;
+
+	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w));
+	return res;
+}
+
+static inline unsigned int hweight32(unsigned int w)
+{
+	unsigned int res;
+
+	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xffffffff));
+	return res;
+}
+
+static inline unsigned int hweight16(unsigned int w)
+{
+	unsigned int res;
+
+	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xffff));
+	return res;
+}
+
+static inline unsigned int hweight8(unsigned int w)
+{
+	unsigned int res;
+
+	__asm__ ("popc %1,%0" : "=r" (res) : "r" (w & 0xff));
+	return res;
+}
+
+#else
+
+#include <asm-generic/bitops/hweight.h>
+
+#endif
+#include <asm-generic/bitops/lock.h>
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/find.h>
+
+#ifdef __KERNEL__
+
+#include <asm-generic/bitops/ext2-non-atomic.h>
+
+#define ext2_set_bit_atomic(lock,nr,addr) \
+	test_and_set_bit((nr) ^ 0x38,(unsigned long *)(addr))
+#define ext2_clear_bit_atomic(lock,nr,addr) \
+	test_and_clear_bit((nr) ^ 0x38,(unsigned long *)(addr))
+
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(_SPARC64_BITOPS_H) */
diff --git a/arch/sparc/include/asm/bpp.h b/arch/sparc/include/asm/bpp.h
new file mode 100644
index 000000000000..31f515e499a7
--- /dev/null
+++ b/arch/sparc/include/asm/bpp.h
@@ -0,0 +1,73 @@
+#ifndef _SPARC_BPP_H
+#define _SPARC_BPP_H
+
+/*
+ * Copyright (c) 1995 Picture Elements
+ *	Stephen Williams
+ *	Gus Baldauf
+ *
+ * Linux/SPARC port by Peter Zaitcev.
+ * Integration into SPARC tree by Tom Dyas.
+ */
+
+#include  <linux/ioctl.h>
+
+/*
+ * This is a driver that supports IEEE Std 1284-1994 communications
+ * with compliant or compatible devices. It will use whatever features
+ * the device supports, prefering those that are typically faster.
+ *
+ * When the device is opened, it is left in COMPATIBILITY mode, and
+ * writes work like any printer device. The driver only attempt to
+ * negotiate 1284 modes when needed so that plugs can be pulled,
+ * switch boxes switched, etc., without disrupting things. It will
+ * also leave the device in compatibility mode when closed.
+ */
+
+
+
+/*
+ * This driver also supplies ioctls to manually manipulate the
+ * pins. This is great for testing devices, or writing code to deal
+ * with bizzarro-mode of the ACME Special TurboThingy Plus.
+ *
+ * NOTE: These ioctl currently do not interact well with
+ * read/write. Caveat emptor.
+ *
+ * PUT_PINS allows us to assign the sense of all the pins, including
+ * the data pins if being driven by the host. The GET_PINS returns the
+ * pins that the peripheral drives, including data if appropriate.
+ */
+
+# define BPP_PUT_PINS _IOW('B', 1, int)
+# define BPP_GET_PINS _IOR('B', 2, char) /* that's bogus - should've been _IO */
+# define BPP_PUT_DATA _IOW('B', 3, int)
+# define BPP_GET_DATA _IOR('B', 4, char) /* ditto */
+
+/*
+ * Set the data bus to input mode. Disengage the data bin driver and
+ * be prepared to read values from the peripheral. If the arg is 0,
+ * then revert the bus to output mode.
+ */
+# define BPP_SET_INPUT _IOW('B', 5, int)
+
+/*
+ * These bits apply to the PUT operation...
+ */
+# define BPP_PP_nStrobe   0x0001
+# define BPP_PP_nAutoFd   0x0002
+# define BPP_PP_nInit     0x0004
+# define BPP_PP_nSelectIn 0x0008
+
+/*
+ * These apply to the GET operation, which also reads the current value
+ * of the previously put values. A bit mask of these will be returned
+ * as a bit mask in the return code of the ioctl().
+ */
+# define BPP_GP_nAck   0x0100
+# define BPP_GP_Busy   0x0200
+# define BPP_GP_PError 0x0400
+# define BPP_GP_Select 0x0800
+# define BPP_GP_nFault 0x1000
+
+#endif
diff --git a/arch/sparc/include/asm/btfixup.h b/arch/sparc/include/asm/btfixup.h
new file mode 100644
index 000000000000..797722cf69f2
--- /dev/null
+++ b/arch/sparc/include/asm/btfixup.h
@@ -0,0 +1,208 @@
+/*
+ *  asm/btfixup.h:    Macros for boot time linking.
+ *
+ *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+ 
+#ifndef _SPARC_BTFIXUP_H
+#define _SPARC_BTFIXUP_H
+
+#include <linux/init.h>
+
+#ifndef __ASSEMBLY__
+
+#ifdef MODULE
+extern unsigned int ___illegal_use_of_BTFIXUP_SIMM13_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_SETHI_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_HALF_in_module(void);
+extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void);
+
+#define BTFIXUP_SIMM13(__name) ___illegal_use_of_BTFIXUP_SIMM13_in_module()
+#define BTFIXUP_HALF(__name) ___illegal_use_of_BTFIXUP_HALF_in_module()
+#define BTFIXUP_SETHI(__name) ___illegal_use_of_BTFIXUP_SETHI_in_module()
+#define BTFIXUP_INT(__name) ___illegal_use_of_BTFIXUP_INT_in_module()
+#define BTFIXUP_BLACKBOX(__name) ___illegal_use_of_BTFIXUP_BLACKBOX_in_module
+
+#else
+
+#define BTFIXUP_SIMM13(__name) ___sf_##__name()
+#define BTFIXUP_HALF(__name) ___af_##__name()
+#define BTFIXUP_SETHI(__name) ___hf_##__name()
+#define BTFIXUP_INT(__name) ((unsigned int)&___i_##__name)
+/* This must be written in assembly and present in a sethi */
+#define BTFIXUP_BLACKBOX(__name) ___b_##__name
+#endif /* MODULE */
+
+/* Fixup call xx */
+
+#define BTFIXUPDEF_CALL(__type, __name, __args...) 					\
+	extern __type ___f_##__name(__args);						\
+	extern unsigned ___fs_##__name[3];
+#define BTFIXUPDEF_CALL_CONST(__type, __name, __args...) 				\
+	extern __type ___f_##__name(__args) __attribute_const__;			\
+	extern unsigned ___fs_##__name[3];
+#define BTFIXUP_CALL(__name) ___f_##__name
+
+#define BTFIXUPDEF_BLACKBOX(__name)							\
+	extern unsigned ___bs_##__name[2];
+
+/* Put bottom 13bits into some register variable */
+
+#define BTFIXUPDEF_SIMM13(__name)							\
+	static inline unsigned int ___sf_##__name(void) __attribute_const__;		\
+	extern unsigned ___ss_##__name[2];						\
+	static inline unsigned int ___sf_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("or %%g0, ___s_" #__name ", %0" : "=r"(ret));			\
+		return ret;								\
+	}
+#define BTFIXUPDEF_SIMM13_INIT(__name,__val)						\
+	static inline unsigned int ___sf_##__name(void) __attribute_const__;		\
+	extern unsigned ___ss_##__name[2];						\
+	static inline unsigned int ___sf_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("or %%g0, ___s_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
+		return ret;								\
+	}
+
+/* Put either bottom 13 bits, or upper 22 bits into some register variable
+ * (depending on the value, this will lead into sethi FIX, reg; or
+ * mov FIX, reg; )
+ */
+
+#define BTFIXUPDEF_HALF(__name)								\
+	static inline unsigned int ___af_##__name(void) __attribute_const__;		\
+	extern unsigned ___as_##__name[2];						\
+	static inline unsigned int ___af_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("or %%g0, ___a_" #__name ", %0" : "=r"(ret));			\
+		return ret;								\
+	}
+#define BTFIXUPDEF_HALF_INIT(__name,__val)						\
+	static inline unsigned int ___af_##__name(void) __attribute_const__;		\
+	extern unsigned ___as_##__name[2];						\
+	static inline unsigned int ___af_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("or %%g0, ___a_" #__name "__btset_" #__val ", %0" : "=r"(ret));\
+		return ret;								\
+	}
+
+/* Put upper 22 bits into some register variable */
+
+#define BTFIXUPDEF_SETHI(__name)							\
+	static inline unsigned int ___hf_##__name(void) __attribute_const__;		\
+	extern unsigned ___hs_##__name[2];						\
+	static inline unsigned int ___hf_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("sethi %%hi(___h_" #__name "), %0" : "=r"(ret));		\
+		return ret;								\
+	}
+#define BTFIXUPDEF_SETHI_INIT(__name,__val)						\
+	static inline unsigned int ___hf_##__name(void) __attribute_const__;		\
+	extern unsigned ___hs_##__name[2];						\
+	static inline unsigned int ___hf_##__name(void) {				\
+		unsigned int ret;							\
+		__asm__ ("sethi %%hi(___h_" #__name "__btset_" #__val "), %0" : 	\
+			 "=r"(ret));							\
+		return ret;								\
+	}
+
+/* Put a full 32bit integer into some register variable */
+
+#define BTFIXUPDEF_INT(__name)								\
+	extern unsigned char ___i_##__name;						\
+	extern unsigned ___is_##__name[2];
+
+#define BTFIXUPCALL_NORM	0x00000000			/* Always call */
+#define BTFIXUPCALL_NOP		0x01000000			/* Possibly optimize to nop */
+#define BTFIXUPCALL_RETINT(i)	(0x90102000|((i) & 0x1fff))	/* Possibly optimize to mov i, %o0 */
+#define BTFIXUPCALL_ORINT(i)	(0x90122000|((i) & 0x1fff))	/* Possibly optimize to or %o0, i, %o0 */
+#define BTFIXUPCALL_RETO0	0x01000000			/* Return first parameter, actually a nop */
+#define BTFIXUPCALL_ANDNINT(i)	(0x902a2000|((i) & 0x1fff))	/* Possibly optimize to andn %o0, i, %o0 */
+#define BTFIXUPCALL_SWAPO0O1	0xd27a0000			/* Possibly optimize to swap [%o0],%o1 */
+#define BTFIXUPCALL_SWAPO0G0	0xc07a0000			/* Possibly optimize to swap [%o0],%g0 */
+#define BTFIXUPCALL_SWAPG1G2	0xc4784000			/* Possibly optimize to swap [%g1],%g2 */
+#define BTFIXUPCALL_STG0O0	0xc0220000			/* Possibly optimize to st %g0,[%o0] */
+#define BTFIXUPCALL_STO1O0	0xd2220000			/* Possibly optimize to st %o1,[%o0] */
+
+#define BTFIXUPSET_CALL(__name, __addr, __insn)						\
+	do {										\
+		___fs_##__name[0] |= 1;							\
+		___fs_##__name[1] = (unsigned long)__addr;				\
+		___fs_##__name[2] = __insn;						\
+	} while (0)
+	
+#define BTFIXUPSET_BLACKBOX(__name, __func)						\
+	do {										\
+		___bs_##__name[0] |= 1;							\
+		___bs_##__name[1] = (unsigned long)__func;				\
+	} while (0)
+	
+#define BTFIXUPCOPY_CALL(__name, __from)						\
+	do {										\
+		___fs_##__name[0] |= 1;							\
+		___fs_##__name[1] = ___fs_##__from[1];					\
+		___fs_##__name[2] = ___fs_##__from[2];					\
+	} while (0)
+		
+#define BTFIXUPSET_SIMM13(__name, __val)						\
+	do {										\
+		___ss_##__name[0] |= 1;							\
+		___ss_##__name[1] = (unsigned)__val;					\
+	} while (0)
+	
+#define BTFIXUPCOPY_SIMM13(__name, __from)						\
+	do {										\
+		___ss_##__name[0] |= 1;							\
+		___ss_##__name[1] = ___ss_##__from[1];					\
+	} while (0)
+		
+#define BTFIXUPSET_HALF(__name, __val)							\
+	do {										\
+		___as_##__name[0] |= 1;							\
+		___as_##__name[1] = (unsigned)__val;					\
+	} while (0)
+	
+#define BTFIXUPCOPY_HALF(__name, __from)						\
+	do {										\
+		___as_##__name[0] |= 1;							\
+		___as_##__name[1] = ___as_##__from[1];					\
+	} while (0)
+		
+#define BTFIXUPSET_SETHI(__name, __val)							\
+	do {										\
+		___hs_##__name[0] |= 1;							\
+		___hs_##__name[1] = (unsigned)__val;					\
+	} while (0)
+	
+#define BTFIXUPCOPY_SETHI(__name, __from)						\
+	do {										\
+		___hs_##__name[0] |= 1;							\
+		___hs_##__name[1] = ___hs_##__from[1];					\
+	} while (0)
+		
+#define BTFIXUPSET_INT(__name, __val)							\
+	do {										\
+		___is_##__name[0] |= 1;							\
+		___is_##__name[1] = (unsigned)__val;					\
+	} while (0)
+	
+#define BTFIXUPCOPY_INT(__name, __from)							\
+	do {										\
+		___is_##__name[0] |= 1;							\
+		___is_##__name[1] = ___is_##__from[1];					\
+	} while (0)
+	
+#define BTFIXUPVAL_CALL(__name)								\
+	((unsigned long)___fs_##__name[1])
+	
+extern void btfixup(void);
+
+#else /* __ASSEMBLY__ */
+
+#define BTFIXUP_SETHI(__name)			%hi(___h_ ## __name)
+#define BTFIXUP_SETHI_INIT(__name,__val)	%hi(___h_ ## __name ## __btset_ ## __val)
+
+#endif /* __ASSEMBLY__ */
+	
+#endif /* !(_SPARC_BTFIXUP_H) */
diff --git a/arch/sparc/include/asm/bug.h b/arch/sparc/include/asm/bug.h
new file mode 100644
index 000000000000..8a59e5a8c217
--- /dev/null
+++ b/arch/sparc/include/asm/bug.h
@@ -0,0 +1,22 @@
+#ifndef _SPARC_BUG_H
+#define _SPARC_BUG_H
+
+#ifdef CONFIG_BUG
+#include <linux/compiler.h>
+
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+extern void do_BUG(const char *file, int line);
+#define BUG() do {					\
+	do_BUG(__FILE__, __LINE__);			\
+	__builtin_trap();				\
+} while (0)
+#else
+#define BUG()		__builtin_trap()
+#endif
+
+#define HAVE_ARCH_BUG
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/arch/sparc/include/asm/bugs.h b/arch/sparc/include/asm/bugs.h
new file mode 100644
index 000000000000..e179bc12f64a
--- /dev/null
+++ b/arch/sparc/include/asm/bugs.h
@@ -0,0 +1,24 @@
+/* include/asm/bugs.h:  Sparc probes for various bugs.
+ *
+ * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifdef CONFIG_SPARC32
+#include <asm/cpudata.h>
+#endif
+
+#ifdef CONFIG_SPARC64
+#include <asm/sstate.h>
+#endif
+
+extern unsigned long loops_per_jiffy;
+
+static void __init check_bugs(void)
+{
+#if defined(CONFIG_SPARC32) && !defined(CONFIG_SMP)
+	cpu_data(0).udelay_val = loops_per_jiffy;
+#endif
+#ifdef CONFIG_SPARC64
+	sstate_running();
+#endif
+}
diff --git a/arch/sparc/include/asm/byteorder.h b/arch/sparc/include/asm/byteorder.h
new file mode 100644
index 000000000000..bcd83aa351c5
--- /dev/null
+++ b/arch/sparc/include/asm/byteorder.h
@@ -0,0 +1,57 @@
+#ifndef _SPARC_BYTEORDER_H
+#define _SPARC_BYTEORDER_H
+
+#include <asm/types.h>
+#include <asm/asi.h>
+
+#ifdef __GNUC__
+
+#ifdef CONFIG_SPARC32
+#define __SWAB_64_THRU_32__
+#endif
+
+#ifdef CONFIG_SPARC64
+
+static inline __u16 ___arch__swab16p(const __u16 *addr)
+{
+	__u16 ret;
+
+	__asm__ __volatile__ ("lduha [%1] %2, %0"
+			      : "=r" (ret)
+			      : "r" (addr), "i" (ASI_PL));
+	return ret;
+}
+
+static inline __u32 ___arch__swab32p(const __u32 *addr)
+{
+	__u32 ret;
+
+	__asm__ __volatile__ ("lduwa [%1] %2, %0"
+			      : "=r" (ret)
+			      : "r" (addr), "i" (ASI_PL));
+	return ret;
+}
+
+static inline __u64 ___arch__swab64p(const __u64 *addr)
+{
+	__u64 ret;
+
+	__asm__ __volatile__ ("ldxa [%1] %2, %0"
+			      : "=r" (ret)
+			      : "r" (addr), "i" (ASI_PL));
+	return ret;
+}
+
+#define __arch__swab16p(x) ___arch__swab16p(x)
+#define __arch__swab32p(x) ___arch__swab32p(x)
+#define __arch__swab64p(x) ___arch__swab64p(x)
+
+#endif /* CONFIG_SPARC64 */
+
+#define __BYTEORDER_HAS_U64__
+
+#endif
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _SPARC_BYTEORDER_H */
diff --git a/arch/sparc/include/asm/cache.h b/arch/sparc/include/asm/cache.h
new file mode 100644
index 000000000000..41f85ae4bd4a
--- /dev/null
+++ b/arch/sparc/include/asm/cache.h
@@ -0,0 +1,138 @@
+/* cache.h:  Cache specific code for the Sparc.  These include flushing
+ *           and direct tag/data line access.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC_CACHE_H
+#define _SPARC_CACHE_H
+
+#define L1_CACHE_SHIFT 5
+#define L1_CACHE_BYTES 32
+#define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)))
+
+#ifdef CONFIG_SPARC32
+#define SMP_CACHE_BYTES_SHIFT 5
+#else
+#define SMP_CACHE_BYTES_SHIFT 6
+#endif
+
+#define SMP_CACHE_BYTES (1 << SMP_CACHE_BYTES_SHIFT)
+
+#define __read_mostly __attribute__((__section__(".data.read_mostly")))
+
+#ifdef CONFIG_SPARC32
+#include <asm/asi.h>
+
+/* Direct access to the instruction cache is provided through and
+ * alternate address space.  The IDC bit must be off in the ICCR on
+ * HyperSparcs for these accesses to work.  The code below does not do
+ * any checking, the caller must do so.  These routines are for
+ * diagnostics only, but could end up being useful.  Use with care.
+ * Also, you are asking for trouble if you execute these in one of the
+ * three instructions following a %asr/%psr access or modification.
+ */
+
+/* First, cache-tag access. */
+static inline unsigned int get_icache_tag(int setnum, int tagnum)
+{
+	unsigned int vaddr, retval;
+
+	vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (vaddr), "i" (ASI_M_TXTC_TAG));
+	return retval;
+}
+
+static inline void put_icache_tag(int setnum, int tagnum, unsigned int entry)
+{
+	unsigned int vaddr;
+
+	vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+			     "r" (entry), "r" (vaddr), "i" (ASI_M_TXTC_TAG) :
+			     "memory");
+}
+
+/* Second cache-data access.  The data is returned two-32bit quantities
+ * at a time.
+ */
+static inline void get_icache_data(int setnum, int tagnum, int subblock,
+				       unsigned int *data)
+{
+	unsigned int value1, value2, vaddr;
+
+	vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
+		((subblock&0x3) << 3);
+	__asm__ __volatile__("ldda [%2] %3, %%g2\n\t"
+			     "or %%g0, %%g2, %0\n\t"
+			     "or %%g0, %%g3, %1\n\t" :
+			     "=r" (value1), "=r" (value2) :
+			     "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
+			     "g2", "g3");
+	data[0] = value1; data[1] = value2;
+}
+
+static inline void put_icache_data(int setnum, int tagnum, int subblock,
+				       unsigned int *data)
+{
+	unsigned int value1, value2, vaddr;
+
+	vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
+		((subblock&0x3) << 3);
+	value1 = data[0]; value2 = data[1];
+	__asm__ __volatile__("or %%g0, %0, %%g2\n\t"
+			     "or %%g0, %1, %%g3\n\t"
+			     "stda %%g2, [%2] %3\n\t" : :
+			     "r" (value1), "r" (value2), 
+			     "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
+			     "g2", "g3", "memory" /* no joke */);
+}
+
+/* Different types of flushes with the ICACHE.  Some of the flushes
+ * affect both the ICACHE and the external cache.  Others only clear
+ * the ICACHE entries on the cpu itself.  V8's (most) allow
+ * granularity of flushes on the packet (element in line), whole line,
+ * and entire cache (ie. all lines) level.  The ICACHE only flushes are
+ * ROSS HyperSparc specific and are in ross.h
+ */
+
+/* Flushes which clear out both the on-chip and external caches */
+static inline void flush_ei_page(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_PAGE) :
+			     "memory");
+}
+
+static inline void flush_ei_seg(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_SEG) :
+			     "memory");
+}
+
+static inline void flush_ei_region(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_REGION) :
+			     "memory");
+}
+
+static inline void flush_ei_ctx(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_CTX) :
+			     "memory");
+}
+
+static inline void flush_ei_user(unsigned int addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_USER) :
+			     "memory");
+}
+#endif /* CONFIG_SPARC32 */
+
+#endif /* !(_SPARC_CACHE_H) */
diff --git a/arch/sparc/include/asm/cacheflush.h b/arch/sparc/include/asm/cacheflush.h
new file mode 100644
index 000000000000..049168087b19
--- /dev/null
+++ b/arch/sparc/include/asm/cacheflush.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CACHEFLUSH_H
+#define ___ASM_SPARC_CACHEFLUSH_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/cacheflush_64.h>
+#else
+#include <asm/cacheflush_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/cacheflush_32.h b/arch/sparc/include/asm/cacheflush_32.h
new file mode 100644
index 000000000000..68ac10910271
--- /dev/null
+++ b/arch/sparc/include/asm/cacheflush_32.h
@@ -0,0 +1,85 @@
+#ifndef _SPARC_CACHEFLUSH_H
+#define _SPARC_CACHEFLUSH_H
+
+#include <linux/mm.h>		/* Common for other includes */
+// #include <linux/kernel.h> from pgalloc.h
+// #include <linux/sched.h>  from pgalloc.h
+
+// #include <asm/page.h>
+#include <asm/btfixup.h>
+
+/*
+ * Fine grained cache flushing.
+ */
+#ifdef CONFIG_SMP
+
+BTFIXUPDEF_CALL(void, local_flush_cache_all, void)
+BTFIXUPDEF_CALL(void, local_flush_cache_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, local_flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_cache_page, struct vm_area_struct *, unsigned long)
+
+#define local_flush_cache_all() BTFIXUP_CALL(local_flush_cache_all)()
+#define local_flush_cache_mm(mm) BTFIXUP_CALL(local_flush_cache_mm)(mm)
+#define local_flush_cache_range(vma,start,end) BTFIXUP_CALL(local_flush_cache_range)(vma,start,end)
+#define local_flush_cache_page(vma,addr) BTFIXUP_CALL(local_flush_cache_page)(vma,addr)
+
+BTFIXUPDEF_CALL(void, local_flush_page_to_ram, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_sig_insns, struct mm_struct *, unsigned long)
+
+#define local_flush_page_to_ram(addr) BTFIXUP_CALL(local_flush_page_to_ram)(addr)
+#define local_flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(local_flush_sig_insns)(mm,insn_addr)
+
+extern void smp_flush_cache_all(void);
+extern void smp_flush_cache_mm(struct mm_struct *mm);
+extern void smp_flush_cache_range(struct vm_area_struct *vma,
+				  unsigned long start,
+				  unsigned long end);
+extern void smp_flush_cache_page(struct vm_area_struct *vma, unsigned long page);
+
+extern void smp_flush_page_to_ram(unsigned long page);
+extern void smp_flush_sig_insns(struct mm_struct *mm, unsigned long insn_addr);
+
+#endif /* CONFIG_SMP */
+
+BTFIXUPDEF_CALL(void, flush_cache_all, void)
+BTFIXUPDEF_CALL(void, flush_cache_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, flush_cache_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, flush_cache_page, struct vm_area_struct *, unsigned long)
+
+#define flush_cache_all() BTFIXUP_CALL(flush_cache_all)()
+#define flush_cache_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm)
+#define flush_cache_dup_mm(mm) BTFIXUP_CALL(flush_cache_mm)(mm)
+#define flush_cache_range(vma,start,end) BTFIXUP_CALL(flush_cache_range)(vma,start,end)
+#define flush_cache_page(vma,addr,pfn) BTFIXUP_CALL(flush_cache_page)(vma,addr)
+#define flush_icache_range(start, end)		do { } while (0)
+#define flush_icache_page(vma, pg)		do { } while (0)
+
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	do {							\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));\
+		memcpy(dst, src, len);				\
+	} while (0)
+
+BTFIXUPDEF_CALL(void, __flush_page_to_ram, unsigned long)
+BTFIXUPDEF_CALL(void, flush_sig_insns, struct mm_struct *, unsigned long)
+
+#define __flush_page_to_ram(addr) BTFIXUP_CALL(__flush_page_to_ram)(addr)
+#define flush_sig_insns(mm,insn_addr) BTFIXUP_CALL(flush_sig_insns)(mm,insn_addr)
+
+extern void sparc_flush_page_to_ram(struct page *page);
+
+#define flush_dcache_page(page)			sparc_flush_page_to_ram(page)
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+#define flush_cache_vmap(start, end)		flush_cache_all()
+#define flush_cache_vunmap(start, end)		flush_cache_all()
+
+#endif /* _SPARC_CACHEFLUSH_H */
diff --git a/arch/sparc/include/asm/cacheflush_64.h b/arch/sparc/include/asm/cacheflush_64.h
new file mode 100644
index 000000000000..c43321729b3b
--- /dev/null
+++ b/arch/sparc/include/asm/cacheflush_64.h
@@ -0,0 +1,76 @@
+#ifndef _SPARC64_CACHEFLUSH_H
+#define _SPARC64_CACHEFLUSH_H
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/mm.h>
+
+/* Cache flush operations. */
+
+/* These are the same regardless of whether this is an SMP kernel or not. */
+#define flush_cache_mm(__mm) \
+	do { if ((__mm) == current->mm) flushw_user(); } while(0)
+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
+#define flush_cache_range(vma, start, end) \
+	flush_cache_mm((vma)->vm_mm)
+#define flush_cache_page(vma, page, pfn) \
+	flush_cache_mm((vma)->vm_mm)
+
+/*
+ * On spitfire, the icache doesn't snoop local stores and we don't
+ * use block commit stores (which invalidate icache lines) during
+ * module load, so we need this.
+ */
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void __flush_icache_page(unsigned long);
+
+extern void __flush_dcache_page(void *addr, int flush_icache);
+extern void flush_dcache_page_impl(struct page *page);
+#ifdef CONFIG_SMP
+extern void smp_flush_dcache_page_impl(struct page *page, int cpu);
+extern void flush_dcache_page_all(struct mm_struct *mm, struct page *page);
+#else
+#define smp_flush_dcache_page_impl(page,cpu) flush_dcache_page_impl(page)
+#define flush_dcache_page_all(mm,page) flush_dcache_page_impl(page)
+#endif
+
+extern void __flush_dcache_range(unsigned long start, unsigned long end);
+extern void flush_dcache_page(struct page *page);
+
+#define flush_icache_page(vma, pg)	do { } while(0)
+#define flush_icache_user_range(vma,pg,adr,len)	do { } while (0)
+
+extern void flush_ptrace_access(struct vm_area_struct *, struct page *,
+				unsigned long uaddr, void *kaddr,
+				unsigned long len, int write);
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len)		\
+	do {								\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));	\
+		memcpy(dst, src, len);					\
+		flush_ptrace_access(vma, page, vaddr, src, len, 0);	\
+	} while (0)
+
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) 		\
+	do {								\
+		flush_cache_page(vma, vaddr, page_to_pfn(page));	\
+		memcpy(dst, src, len);					\
+		flush_ptrace_access(vma, page, vaddr, dst, len, 1);	\
+	} while (0)
+
+#define flush_dcache_mmap_lock(mapping)		do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)	do { } while (0)
+
+#define flush_cache_vmap(start, end)		do { } while (0)
+#define flush_cache_vunmap(start, end)		do { } while (0)
+
+#ifdef CONFIG_DEBUG_PAGEALLOC
+/* internal debugging function */
+void kernel_map_pages(struct page *page, int numpages, int enable);
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _SPARC64_CACHEFLUSH_H */
diff --git a/arch/sparc/include/asm/chafsr.h b/arch/sparc/include/asm/chafsr.h
new file mode 100644
index 000000000000..85c69b38220b
--- /dev/null
+++ b/arch/sparc/include/asm/chafsr.h
@@ -0,0 +1,241 @@
+#ifndef _SPARC64_CHAFSR_H
+#define _SPARC64_CHAFSR_H
+
+/* Cheetah Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */
+
+/* Comments indicate which processor variants on which the bit definition
+ * is valid.  Codes are:
+ * ch	-->	cheetah
+ * ch+	-->	cheetah plus
+ * jp	-->	jalapeno
+ */
+
+/* All bits of this register except M_SYNDROME and E_SYNDROME are
+ * read, write 1 to clear.  M_SYNDROME and E_SYNDROME are read-only.
+ */
+
+/* Software bit set by linux trap handlers to indicate that the trap was
+ * signalled at %tl >= 1.
+ */
+#define CHAFSR_TL1		(1UL << 63UL) /* n/a */
+
+/* Unmapped error from system bus for prefetch queue or
+ * store queue read operation
+ */
+#define CHPAFSR_DTO		(1UL << 59UL) /* ch+ */
+
+/* Bus error from system bus for prefetch queue or store queue
+ * read operation
+ */
+#define CHPAFSR_DBERR		(1UL << 58UL) /* ch+ */
+
+/* Hardware corrected E-cache Tag ECC error */
+#define CHPAFSR_THCE		(1UL << 57UL) /* ch+ */
+/* System interface protocol error, hw timeout caused */
+#define JPAFSR_JETO		(1UL << 57UL) /* jp */
+
+/* SW handled correctable E-cache Tag ECC error */
+#define CHPAFSR_TSCE		(1UL << 56UL) /* ch+ */
+/* Parity error on system snoop results */
+#define JPAFSR_SCE		(1UL << 56UL) /* jp */
+
+/* Uncorrectable E-cache Tag ECC error */
+#define CHPAFSR_TUE		(1UL << 55UL) /* ch+ */
+/* System interface protocol error, illegal command detected */
+#define JPAFSR_JEIC		(1UL << 55UL) /* jp */
+
+/* Uncorrectable system bus data ECC error due to prefetch
+ * or store fill request
+ */
+#define CHPAFSR_DUE		(1UL << 54UL) /* ch+ */
+/* System interface protocol error, illegal ADTYPE detected */
+#define JPAFSR_JEIT		(1UL << 54UL) /* jp */
+
+/* Multiple errors of the same type have occurred.  This bit is set when
+ * an uncorrectable error or a SW correctable error occurs and the status
+ * bit to report that error is already set.  When multiple errors of
+ * different types are indicated by setting multiple status bits.
+ *
+ * This bit is not set if multiple HW corrected errors with the same
+ * status bit occur, only uncorrectable and SW correctable ones have
+ * this behavior.
+ *
+ * This bit is not set when multiple ECC errors happen within a single
+ * 64-byte system bus transaction.  Only the first ECC error in a 16-byte
+ * subunit will be logged.  All errors in subsequent 16-byte subunits
+ * from the same 64-byte transaction are ignored.
+ */
+#define CHAFSR_ME		(1UL << 53UL) /* ch,ch+,jp */
+
+/* Privileged state error has occurred.  This is a capture of PSTATE.PRIV
+ * at the time the error is detected.
+ */
+#define CHAFSR_PRIV		(1UL << 52UL) /* ch,ch+,jp */
+
+/* The following bits 51 (CHAFSR_PERR) to 33 (CHAFSR_CE) are sticky error
+ * bits and record the most recently detected errors.  Bits accumulate
+ * errors that have been detected since the last write to clear the bit.
+ */
+
+/* System interface protocol error.  The processor asserts its' ERROR
+ * pin when this event occurs and it also logs a specific cause code
+ * into a JTAG scannable flop.
+ */
+#define CHAFSR_PERR		(1UL << 51UL) /* ch,ch+,jp */
+
+/* Internal processor error.  The processor asserts its' ERROR
+ * pin when this event occurs and it also logs a specific cause code
+ * into a JTAG scannable flop.
+ */
+#define CHAFSR_IERR		(1UL << 50UL) /* ch,ch+,jp */
+
+/* System request parity error on incoming address */
+#define CHAFSR_ISAP		(1UL << 49UL) /* ch,ch+,jp */
+
+/* HW Corrected system bus MTAG ECC error */
+#define CHAFSR_EMC		(1UL << 48UL) /* ch,ch+ */
+/* Parity error on L2 cache tag SRAM */
+#define JPAFSR_ETP		(1UL << 48UL) /* jp */
+
+/* Uncorrectable system bus MTAG ECC error */
+#define CHAFSR_EMU		(1UL << 47UL) /* ch,ch+ */
+/* Out of range memory error has occurred */
+#define JPAFSR_OM		(1UL << 47UL) /* jp */
+
+/* HW Corrected system bus data ECC error for read of interrupt vector */
+#define CHAFSR_IVC		(1UL << 46UL) /* ch,ch+ */
+/* Error due to unsupported store */
+#define JPAFSR_UMS		(1UL << 46UL) /* jp */
+
+/* Uncorrectable system bus data ECC error for read of interrupt vector */
+#define CHAFSR_IVU		(1UL << 45UL) /* ch,ch+,jp */
+
+/* Unmapped error from system bus */
+#define CHAFSR_TO		(1UL << 44UL) /* ch,ch+,jp */
+
+/* Bus error response from system bus */
+#define CHAFSR_BERR		(1UL << 43UL) /* ch,ch+,jp */
+
+/* SW Correctable E-cache ECC error for instruction fetch or data access
+ * other than block load.
+ */
+#define CHAFSR_UCC		(1UL << 42UL) /* ch,ch+,jp */
+
+/* Uncorrectable E-cache ECC error for instruction fetch or data access
+ * other than block load.
+ */
+#define CHAFSR_UCU		(1UL << 41UL) /* ch,ch+,jp */
+
+/* Copyout HW Corrected ECC error */
+#define CHAFSR_CPC		(1UL << 40UL) /* ch,ch+,jp */
+
+/* Copyout Uncorrectable ECC error */
+#define CHAFSR_CPU		(1UL << 39UL) /* ch,ch+,jp */
+
+/* HW Corrected ECC error from E-cache for writeback */
+#define CHAFSR_WDC		(1UL << 38UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from E-cache for writeback */
+#define CHAFSR_WDU		(1UL << 37UL) /* ch,ch+,jp */
+
+/* HW Corrected ECC error from E-cache for store merge or block load */
+#define CHAFSR_EDC		(1UL << 36UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from E-cache for store merge or block load */
+#define CHAFSR_EDU		(1UL << 35UL) /* ch,ch+,jp */
+
+/* Uncorrectable system bus data ECC error for read of memory or I/O */
+#define CHAFSR_UE		(1UL << 34UL) /* ch,ch+,jp */
+
+/* HW Corrected system bus data ECC error for read of memory or I/O */
+#define CHAFSR_CE		(1UL << 33UL) /* ch,ch+,jp */
+
+/* Uncorrectable ECC error from remote cache/memory */
+#define JPAFSR_RUE		(1UL << 32UL) /* jp */
+
+/* Correctable ECC error from remote cache/memory */
+#define JPAFSR_RCE		(1UL << 31UL) /* jp */
+
+/* JBUS parity error on returned read data */
+#define JPAFSR_BP		(1UL << 30UL) /* jp */
+
+/* JBUS parity error on data for writeback or block store */
+#define JPAFSR_WBP		(1UL << 29UL) /* jp */
+
+/* Foreign read to DRAM incurring correctable ECC error */
+#define JPAFSR_FRC		(1UL << 28UL) /* jp */
+
+/* Foreign read to DRAM incurring uncorrectable ECC error */
+#define JPAFSR_FRU		(1UL << 27UL) /* jp */
+
+#define CHAFSR_ERRORS		(CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \
+				 CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \
+				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \
+				 CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \
+				 CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE)
+#define CHPAFSR_ERRORS		(CHPAFSR_DTO | CHPAFSR_DBERR | CHPAFSR_THCE | \
+				 CHPAFSR_TSCE | CHPAFSR_TUE | CHPAFSR_DUE | \
+				 CHAFSR_PERR | CHAFSR_IERR | CHAFSR_ISAP | CHAFSR_EMC | \
+				 CHAFSR_EMU | CHAFSR_IVC | CHAFSR_IVU | CHAFSR_TO | \
+				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | CHAFSR_CPC | \
+				 CHAFSR_CPU | CHAFSR_WDC | CHAFSR_WDU | CHAFSR_EDC | \
+				 CHAFSR_EDU | CHAFSR_UE | CHAFSR_CE)
+#define JPAFSR_ERRORS		(JPAFSR_JETO | JPAFSR_SCE | JPAFSR_JEIC | \
+				 JPAFSR_JEIT | CHAFSR_PERR | CHAFSR_IERR | \
+				 CHAFSR_ISAP | JPAFSR_ETP | JPAFSR_OM | \
+				 JPAFSR_UMS | CHAFSR_IVU | CHAFSR_TO | \
+				 CHAFSR_BERR | CHAFSR_UCC | CHAFSR_UCU | \
+				 CHAFSR_CPC | CHAFSR_CPU | CHAFSR_WDC | \
+				 CHAFSR_WDU | CHAFSR_EDC | CHAFSR_EDU | \
+				 CHAFSR_UE | CHAFSR_CE | JPAFSR_RUE | \
+				 JPAFSR_RCE | JPAFSR_BP | JPAFSR_WBP | \
+				 JPAFSR_FRC | JPAFSR_FRU)
+
+/* Active JBUS request signal when error occurred */
+#define JPAFSR_JBREQ		(0x7UL << 24UL) /* jp */
+#define JPAFSR_JBREQ_SHIFT	24UL
+
+/* L2 cache way information */
+#define JPAFSR_ETW		(0x3UL << 22UL) /* jp */
+#define JPAFSR_ETW_SHIFT	22UL
+
+/* System bus MTAG ECC syndrome.  This field captures the status of the
+ * first occurrence of the highest-priority error according to the M_SYND
+ * overwrite policy.  After the AFSR sticky bit, corresponding to the error
+ * for which the M_SYND is reported, is cleared, the contents of the M_SYND
+ * field will be unchanged by will be unfrozen for further error capture.
+ */
+#define CHAFSR_M_SYNDROME	(0xfUL << 16UL) /* ch,ch+,jp */
+#define CHAFSR_M_SYNDROME_SHIFT	16UL
+
+/* Agenid Id of the foreign device causing the UE/CE errors */
+#define JPAFSR_AID		(0x1fUL << 9UL) /* jp */
+#define JPAFSR_AID_SHIFT	9UL
+
+/* System bus or E-cache data ECC syndrome.  This field captures the status
+ * of the first occurrence of the highest-priority error according to the
+ * E_SYND overwrite policy.  After the AFSR sticky bit, corresponding to the
+ * error for which the E_SYND is reported, is cleare, the contents of the E_SYND
+ * field will be unchanged but will be unfrozen for further error capture.
+ */
+#define CHAFSR_E_SYNDROME	(0x1ffUL << 0UL) /* ch,ch+,jp */
+#define CHAFSR_E_SYNDROME_SHIFT	0UL
+
+/* The AFSR must be explicitly cleared by software, it is not cleared automatically
+ * by a read.  Writes to bits <51:33> with bits set will clear the corresponding
+ * bits in the AFSR.  Bits associated with disrupting traps must be cleared before
+ * interrupts are re-enabled to prevent multiple traps for the same error.  I.e.
+ * PSTATE.IE and AFSR bits control delivery of disrupting traps.
+ *
+ * Since there is only one AFAR, when multiple events have been logged by the
+ * bits in the AFSR, at most one of these events will have its status captured
+ * in the AFAR.  The highest priority of those event bits will get AFAR logging.
+ * The AFAR will be unlocked and available to capture the address of another event
+ * as soon as the one bit in AFSR that corresponds to the event logged in AFAR is
+ * cleared.  For example, if AFSR.CE is detected, then AFSR.UE (which overwrites
+ * the AFAR), and AFSR.UE is cleared by not AFSR.CE, then the AFAR will be unlocked
+ * and ready for another event, even though AFSR.CE is still set.  The same rules
+ * also apply to the M_SYNDROME and E_SYNDROME fields of the AFSR.
+ */
+
+#endif /* _SPARC64_CHAFSR_H */
diff --git a/arch/sparc/include/asm/checksum.h b/arch/sparc/include/asm/checksum.h
new file mode 100644
index 000000000000..7ac0d7497bc5
--- /dev/null
+++ b/arch/sparc/include/asm/checksum.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CHECKSUM_H
+#define ___ASM_SPARC_CHECKSUM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/checksum_64.h>
+#else
+#include <asm/checksum_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/checksum_32.h b/arch/sparc/include/asm/checksum_32.h
new file mode 100644
index 000000000000..bdbda1453aa9
--- /dev/null
+++ b/arch/sparc/include/asm/checksum_32.h
@@ -0,0 +1,241 @@
+#ifndef __SPARC_CHECKSUM_H
+#define __SPARC_CHECKSUM_H
+
+/*  checksum.h:  IP/UDP/TCP checksum routines on the Sparc.
+ *
+ *  Copyright(C) 1995 Linus Torvalds
+ *  Copyright(C) 1995 Miguel de Icaza
+ *  Copyright(C) 1996 David S. Miller
+ *  Copyright(C) 1996 Eddie C. Dost
+ *  Copyright(C) 1997 Jakub Jelinek
+ *
+ * derived from:
+ *	Alpha checksum c-code
+ *      ix86 inline assembly
+ *      RFC1071 Computing the Internet Checksum
+ */
+
+#include <linux/in6.h>
+#include <asm/uaccess.h>
+
+/* computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/* the same as csum_partial, but copies from fs:src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern unsigned int __csum_partial_copy_sparc_generic (const unsigned char *, unsigned char *);
+
+static inline __wsum
+csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
+{
+	register unsigned int ret asm("o0") = (unsigned int)src;
+	register char *d asm("o1") = dst;
+	register int l asm("g1") = len;
+
+	__asm__ __volatile__ (
+		"call __csum_partial_copy_sparc_generic\n\t"
+		" mov %6, %%g7\n"
+	: "=&r" (ret), "=&r" (d), "=&r" (l)
+	: "0" (ret), "1" (d), "2" (l), "r" (sum)
+	: "o2", "o3", "o4", "o5", "o7",
+	  "g2", "g3", "g4", "g5", "g7",
+	  "memory", "cc");
+	return (__force __wsum)ret;
+}
+
+static inline __wsum
+csum_partial_copy_from_user(const void __user *src, void *dst, int len,
+			    __wsum sum, int *err)
+  {
+	register unsigned long ret asm("o0") = (unsigned long)src;
+	register char *d asm("o1") = dst;
+	register int l asm("g1") = len;
+	register __wsum s asm("g7") = sum;
+
+	__asm__ __volatile__ (
+	".section __ex_table,#alloc\n\t"
+	".align 4\n\t"
+	".word 1f,2\n\t"
+	".previous\n"
+	"1:\n\t"
+	"call __csum_partial_copy_sparc_generic\n\t"
+	" st %8, [%%sp + 64]\n"
+	: "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s)
+	: "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err)
+	: "o2", "o3", "o4", "o5", "o7", "g2", "g3", "g4", "g5",
+	  "cc", "memory");
+	return (__force __wsum)ret;
+}
+
+static inline __wsum
+csum_partial_copy_to_user(const void *src, void __user *dst, int len,
+			  __wsum sum, int *err)
+{
+	if (!access_ok (VERIFY_WRITE, dst, len)) {
+		*err = -EFAULT;
+		return sum;
+	} else {
+		register unsigned long ret asm("o0") = (unsigned long)src;
+		register char __user *d asm("o1") = dst;
+		register int l asm("g1") = len;
+		register __wsum s asm("g7") = sum;
+
+		__asm__ __volatile__ (
+		".section __ex_table,#alloc\n\t"
+		".align 4\n\t"
+		".word 1f,1\n\t"
+		".previous\n"
+		"1:\n\t"
+		"call __csum_partial_copy_sparc_generic\n\t"
+		" st %8, [%%sp + 64]\n"
+		: "=&r" (ret), "=&r" (d), "=&r" (l), "=&r" (s)
+		: "0" (ret), "1" (d), "2" (l), "3" (s), "r" (err)
+		: "o2", "o3", "o4", "o5", "o7",
+		  "g2", "g3", "g4", "g5",
+		  "cc", "memory");
+		return (__force __wsum)ret;
+	}
+}
+
+#define HAVE_CSUM_COPY_USER
+#define csum_and_copy_to_user csum_partial_copy_to_user
+
+/* ihl is always 5 or greater, almost always is 5, and iph is word aligned
+ * the majority of the time.
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+	__sum16 sum;
+
+	/* Note: We must read %2 before we touch %0 for the first time,
+	 *       because GCC can legitimately use the same register for
+	 *       both operands.
+	 */
+	__asm__ __volatile__("sub\t%2, 4, %%g4\n\t"
+			     "ld\t[%1 + 0x00], %0\n\t"
+			     "ld\t[%1 + 0x04], %%g2\n\t"
+			     "ld\t[%1 + 0x08], %%g3\n\t"
+			     "addcc\t%%g2, %0, %0\n\t"
+			     "addxcc\t%%g3, %0, %0\n\t"
+			     "ld\t[%1 + 0x0c], %%g2\n\t"
+			     "ld\t[%1 + 0x10], %%g3\n\t"
+			     "addxcc\t%%g2, %0, %0\n\t"
+			     "addx\t%0, %%g0, %0\n"
+			     "1:\taddcc\t%%g3, %0, %0\n\t"
+			     "add\t%1, 4, %1\n\t"
+			     "addxcc\t%0, %%g0, %0\n\t"
+			     "subcc\t%%g4, 1, %%g4\n\t"
+			     "be,a\t2f\n\t"
+			     "sll\t%0, 16, %%g2\n\t"
+			     "b\t1b\n\t"
+			     "ld\t[%1 + 0x10], %%g3\n"
+			     "2:\taddcc\t%0, %%g2, %%g2\n\t"
+			     "srl\t%%g2, 16, %0\n\t"
+			     "addx\t%0, %%g0, %0\n\t"
+			     "xnor\t%%g0, %0, %0"
+			     : "=r" (sum), "=&r" (iph)
+			     : "r" (ihl), "1" (iph)
+			     : "g2", "g3", "g4", "cc", "memory");
+	return sum;
+}
+
+/* Fold a partial checksum without adding pseudo headers. */
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp;
+
+	__asm__ __volatile__("addcc\t%0, %1, %1\n\t"
+			     "srl\t%1, 16, %1\n\t"
+			     "addx\t%1, %%g0, %1\n\t"
+			     "xnor\t%%g0, %1, %0"
+			     : "=&r" (sum), "=r" (tmp)
+			     : "0" (sum), "1" ((__force u32)sum<<16)
+			     : "cc");
+	return (__force __sum16)sum;
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+					       unsigned short len,
+					       unsigned short proto,
+					       __wsum sum)
+{
+	__asm__ __volatile__("addcc\t%1, %0, %0\n\t"
+			     "addxcc\t%2, %0, %0\n\t"
+			     "addxcc\t%3, %0, %0\n\t"
+			     "addx\t%0, %%g0, %0\n\t"
+			     : "=r" (sum), "=r" (saddr)
+			     : "r" (daddr), "r" (proto + len), "0" (sum),
+			       "1" (saddr)
+			     : "cc");
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+				      const struct in6_addr *daddr,
+				      __u32 len, unsigned short proto,
+				      __wsum sum)
+{
+	__asm__ __volatile__ (
+		"addcc	%3, %4, %%g4\n\t"
+		"addxcc	%5, %%g4, %%g4\n\t"
+		"ld	[%2 + 0x0c], %%g2\n\t"
+		"ld	[%2 + 0x08], %%g3\n\t"
+		"addxcc	%%g2, %%g4, %%g4\n\t"
+		"ld	[%2 + 0x04], %%g2\n\t"
+		"addxcc	%%g3, %%g4, %%g4\n\t"
+		"ld	[%2 + 0x00], %%g3\n\t"
+		"addxcc	%%g2, %%g4, %%g4\n\t"
+		"ld	[%1 + 0x0c], %%g2\n\t"
+		"addxcc	%%g3, %%g4, %%g4\n\t"
+		"ld	[%1 + 0x08], %%g3\n\t"
+		"addxcc	%%g2, %%g4, %%g4\n\t"
+		"ld	[%1 + 0x04], %%g2\n\t"
+		"addxcc	%%g3, %%g4, %%g4\n\t"
+		"ld	[%1 + 0x00], %%g3\n\t"
+		"addxcc	%%g2, %%g4, %%g4\n\t"
+		"addxcc	%%g3, %%g4, %0\n\t"
+		"addx	0, %0, %0\n"
+		: "=&r" (sum)
+		: "r" (saddr), "r" (daddr),
+		  "r"(htonl(len)), "r"(htonl(proto)), "r"(sum)
+		: "g2", "g3", "g4", "cc");
+
+	return csum_fold(sum);
+}
+
+/* this routine is used for miscellaneous IP-like checksums, mainly in icmp.c */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* !(__SPARC_CHECKSUM_H) */
diff --git a/arch/sparc/include/asm/checksum_64.h b/arch/sparc/include/asm/checksum_64.h
new file mode 100644
index 000000000000..019b9615e43c
--- /dev/null
+++ b/arch/sparc/include/asm/checksum_64.h
@@ -0,0 +1,167 @@
+#ifndef __SPARC64_CHECKSUM_H
+#define __SPARC64_CHECKSUM_H
+
+/*  checksum.h:  IP/UDP/TCP checksum routines on the V9.
+ *
+ *  Copyright(C) 1995 Linus Torvalds
+ *  Copyright(C) 1995 Miguel de Icaza
+ *  Copyright(C) 1996 David S. Miller
+ *  Copyright(C) 1996 Eddie C. Dost
+ *  Copyright(C) 1997 Jakub Jelinek
+ *
+ * derived from:
+ *	Alpha checksum c-code
+ *      ix86 inline assembly
+ *      RFC1071 Computing the Internet Checksum
+ */
+
+#include <linux/in6.h>
+#include <asm/uaccess.h>
+
+/* computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern __wsum csum_partial(const void * buff, int len, __wsum sum);
+
+/* the same as csum_partial, but copies from user space while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern __wsum csum_partial_copy_nocheck(const void *src, void *dst,
+					      int len, __wsum sum);
+
+extern long __csum_partial_copy_from_user(const void __user *src,
+					  void *dst, int len,
+					  __wsum sum);
+
+static inline __wsum
+csum_partial_copy_from_user(const void __user *src,
+			    void *dst, int len,
+			    __wsum sum, int *err)
+{
+	long ret = __csum_partial_copy_from_user(src, dst, len, sum);
+	if (ret < 0)
+		*err = -EFAULT;
+	return (__force __wsum) ret;
+}
+
+/*
+ *	Copy and checksum to user
+ */
+#define HAVE_CSUM_COPY_USER
+extern long __csum_partial_copy_to_user(const void *src,
+					void __user *dst, int len,
+					  __wsum sum);
+
+static inline __wsum
+csum_and_copy_to_user(const void *src,
+		      void __user *dst, int len,
+		      __wsum sum, int *err)
+{
+	long ret = __csum_partial_copy_to_user(src, dst, len, sum);
+	if (ret < 0)
+		*err = -EFAULT;
+	return (__force __wsum) ret;
+}
+
+/* ihl is always 5 or greater, almost always is 5, and iph is word aligned
+ * the majority of the time.
+ */
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/* Fold a partial checksum without adding pseudo headers. */
+static inline __sum16 csum_fold(__wsum sum)
+{
+	unsigned int tmp;
+
+	__asm__ __volatile__(
+"	addcc		%0, %1, %1\n"
+"	srl		%1, 16, %1\n"
+"	addc		%1, %%g0, %1\n"
+"	xnor		%%g0, %1, %0\n"
+	: "=&r" (sum), "=r" (tmp)
+	: "0" (sum), "1" ((__force u32)sum<<16)
+	: "cc");
+	return (__force __sum16)sum;
+}
+
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+					       unsigned int len,
+					       unsigned short proto,
+					       __wsum sum)
+{
+	__asm__ __volatile__(
+"	addcc		%1, %0, %0\n"
+"	addccc		%2, %0, %0\n"
+"	addccc		%3, %0, %0\n"
+"	addc		%0, %%g0, %0\n"
+	: "=r" (sum), "=r" (saddr)
+	: "r" (daddr), "r" (proto + len), "0" (sum), "1" (saddr)
+	: "cc");
+	return sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+						   unsigned short len,
+						   unsigned short proto,
+						   __wsum sum)
+{
+	return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+
+static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
+				      const struct in6_addr *daddr,
+				      __u32 len, unsigned short proto,
+				      __wsum sum)
+{
+	__asm__ __volatile__ (
+"	addcc		%3, %4, %%g7\n"
+"	addccc		%5, %%g7, %%g7\n"
+"	lduw		[%2 + 0x0c], %%g2\n"
+"	lduw		[%2 + 0x08], %%g3\n"
+"	addccc		%%g2, %%g7, %%g7\n"
+"	lduw		[%2 + 0x04], %%g2\n"
+"	addccc		%%g3, %%g7, %%g7\n"
+"	lduw		[%2 + 0x00], %%g3\n"
+"	addccc		%%g2, %%g7, %%g7\n"
+"	lduw		[%1 + 0x0c], %%g2\n"
+"	addccc		%%g3, %%g7, %%g7\n"
+"	lduw		[%1 + 0x08], %%g3\n"
+"	addccc		%%g2, %%g7, %%g7\n"
+"	lduw		[%1 + 0x04], %%g2\n"
+"	addccc		%%g3, %%g7, %%g7\n"
+"	lduw		[%1 + 0x00], %%g3\n"
+"	addccc		%%g2, %%g7, %%g7\n"
+"	addccc		%%g3, %%g7, %0\n"
+"	addc		0, %0, %0\n"
+	: "=&r" (sum)
+	: "r" (saddr), "r" (daddr), "r"(htonl(len)),
+	  "r"(htonl(proto)), "r"(sum)
+	: "g2", "g3", "g7", "cc");
+
+	return csum_fold(sum);
+}
+
+/* this routine is used for miscellaneous IP-like checksums, mainly in icmp.c */
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+	return csum_fold(csum_partial(buff, len, 0));
+}
+
+#endif /* !(__SPARC64_CHECKSUM_H) */
diff --git a/arch/sparc/include/asm/chmctrl.h b/arch/sparc/include/asm/chmctrl.h
new file mode 100644
index 000000000000..859b4a4b0d30
--- /dev/null
+++ b/arch/sparc/include/asm/chmctrl.h
@@ -0,0 +1,183 @@
+#ifndef _SPARC64_CHMCTRL_H
+#define _SPARC64_CHMCTRL_H
+
+/* Cheetah memory controller programmable registers. */
+#define CHMCTRL_TCTRL1		0x00 /* Memory Timing Control I		*/
+#define CHMCTRL_TCTRL2		0x08 /* Memory Timing Control II	*/
+#define CHMCTRL_TCTRL3		0x38 /* Memory Timing Control III	*/
+#define CHMCTRL_TCTRL4		0x40 /* Memory Timing Control IV	*/
+#define CHMCTRL_DECODE1		0x10 /* Memory Address Decode I		*/
+#define CHMCTRL_DECODE2		0x18 /* Memory Address Decode II	*/
+#define CHMCTRL_DECODE3		0x20 /* Memory Address Decode III	*/
+#define CHMCTRL_DECODE4		0x28 /* Memory Address Decode IV	*/
+#define CHMCTRL_MACTRL		0x30 /* Memory Address Control		*/
+
+/* Memory Timing Control I */
+#define TCTRL1_SDRAMCTL_DLY	0xf000000000000000UL
+#define TCTRL1_SDRAMCTL_DLY_SHIFT     60
+#define TCTRL1_SDRAMCLK_DLY	0x0e00000000000000UL
+#define TCTRL1_SDRAMCLK_DLY_SHIFT     57
+#define TCTRL1_R		0x0100000000000000UL
+#define TCTRL1_R_SHIFT 		      56
+#define TCTRL1_AUTORFR_CYCLE	0x00fe000000000000UL
+#define TCTRL1_AUTORFR_CYCLE_SHIFT    49
+#define TCTRL1_RD_WAIT		0x0001f00000000000UL
+#define TCTRL1_RD_WAIT_SHIFT	      44
+#define TCTRL1_PC_CYCLE		0x00000fc000000000UL
+#define TCTRL1_PC_CYCLE_SHIFT	      38
+#define TCTRL1_WR_MORE_RAS_PW	0x0000003f00000000UL
+#define TCTRL1_WR_MORE_RAS_PW_SHIFT   32
+#define TCTRL1_RD_MORE_RAW_PW	0x00000000fc000000UL
+#define TCTRL1_RD_MORE_RAS_PW_SHIFT   26
+#define TCTRL1_ACT_WR_DLY	0x0000000003f00000UL
+#define TCTRL1_ACT_WR_DLY_SHIFT	      20
+#define TCTRL1_ACT_RD_DLY	0x00000000000fc000UL
+#define TCTRL1_ACT_RD_DLY_SHIFT	      14
+#define TCTRL1_BANK_PRESENT	0x0000000000003000UL
+#define TCTRL1_BANK_PRESENT_SHIFT     12
+#define TCTRL1_RFR_INT		0x0000000000000ff8UL
+#define TCTRL1_RFR_INT_SHIFT	      3
+#define TCTRL1_SET_MODE_REG	0x0000000000000004UL
+#define TCTRL1_SET_MODE_REG_SHIFT     2
+#define TCTRL1_RFR_ENABLE	0x0000000000000002UL
+#define TCTRL1_RFR_ENABLE_SHIFT	      1
+#define TCTRL1_PRECHG_ALL	0x0000000000000001UL
+#define TCTRL1_PRECHG_ALL_SHIFT	      0
+
+/* Memory Timing Control II */
+#define TCTRL2_WR_MSEL_DLY	0xfc00000000000000UL
+#define TCTRL2_WR_MSEL_DLY_SHIFT      58
+#define TCTRL2_RD_MSEL_DLY	0x03f0000000000000UL
+#define TCTRL2_RD_MSEL_DLY_SHIFT      52
+#define TCTRL2_WRDATA_THLD	0x000c000000000000UL
+#define TCTRL2_WRDATA_THLD_SHIFT      50
+#define TCTRL2_RDWR_RD_TI_DLY	0x0003f00000000000UL
+#define TCTRL2_RDWR_RD_TI_DLY_SHIFT   44
+#define TCTRL2_AUTOPRECHG_ENBL	0x0000080000000000UL
+#define TCTRL2_AUTOPRECHG_ENBL_SHIFT  43
+#define TCTRL2_RDWR_PI_MORE_DLY	0x000007c000000000UL
+#define TCTRL2_RDWR_PI_MORE_DLY_SHIFT 38
+#define TCTRL2_RDWR_1_DLY	0x0000003f00000000UL
+#define TCTRL2_RDWR_1_DLY_SHIFT       32
+#define TCTRL2_WRWR_PI_MORE_DLY	0x00000000f8000000UL
+#define TCTRL2_WRWR_PI_MORE_DLY_SHIFT 27
+#define TCTRL2_WRWR_1_DLY	0x0000000007e00000UL
+#define TCTRL2_WRWR_1_DLY_SHIFT       21
+#define TCTRL2_RDWR_RD_PI_MORE_DLY 0x00000000001f0000UL
+#define TCTRL2_RDWR_RD_PI_MORE_DLY_SHIFT 16
+#define TCTRL2_R		0x0000000000008000UL
+#define TCTRL2_R_SHIFT		      15
+#define TCTRL2_SDRAM_MODE_REG_DATA 0x0000000000007fffUL
+#define TCTRL2_SDRAM_MODE_REG_DATA_SHIFT 0
+
+/* Memory Timing Control III */
+#define TCTRL3_SDRAM_CTL_DLY	0xf000000000000000UL
+#define TCTRL3_SDRAM_CTL_DLY_SHIFT    60
+#define TCTRL3_SDRAM_CLK_DLY	0x0e00000000000000UL
+#define TCTRL3_SDRAM_CLK_DLY_SHIFT    57
+#define TCTRL3_R		0x0100000000000000UL
+#define TCTRL3_R_SHIFT		      56
+#define TCTRL3_AUTO_RFR_CYCLE	0x00fe000000000000UL
+#define TCTRL3_AUTO_RFR_CYCLE_SHIFT   49
+#define TCTRL3_RD_WAIT		0x0001f00000000000UL
+#define TCTRL3_RD_WAIT_SHIFT	      44
+#define TCTRL3_PC_CYCLE		0x00000fc000000000UL
+#define TCTRL3_PC_CYCLE_SHIFT	      38
+#define TCTRL3_WR_MORE_RAW_PW	0x0000003f00000000UL
+#define TCTRL3_WR_MORE_RAW_PW_SHIFT   32
+#define TCTRL3_RD_MORE_RAW_PW	0x00000000fc000000UL
+#define TCTRL3_RD_MORE_RAW_PW_SHIFT   26
+#define TCTRL3_ACT_WR_DLY	0x0000000003f00000UL
+#define TCTRL3_ACT_WR_DLY_SHIFT       20
+#define TCTRL3_ACT_RD_DLY	0x00000000000fc000UL
+#define TCTRL3_ACT_RD_DLY_SHIFT       14
+#define TCTRL3_BANK_PRESENT	0x0000000000003000UL
+#define TCTRL3_BANK_PRESENT_SHIFT     12
+#define TCTRL3_RFR_INT		0x0000000000000ff8UL
+#define TCTRL3_RFR_INT_SHIFT	      3
+#define TCTRL3_SET_MODE_REG	0x0000000000000004UL
+#define TCTRL3_SET_MODE_REG_SHIFT     2
+#define TCTRL3_RFR_ENABLE	0x0000000000000002UL
+#define TCTRL3_RFR_ENABLE_SHIFT       1
+#define TCTRL3_PRECHG_ALL	0x0000000000000001UL
+#define TCTRL3_PRECHG_ALL_SHIFT	      0
+
+/* Memory Timing Control IV */
+#define TCTRL4_WR_MSEL_DLY	0xfc00000000000000UL
+#define TCTRL4_WR_MSEL_DLY_SHIFT      58
+#define TCTRL4_RD_MSEL_DLY	0x03f0000000000000UL
+#define TCTRL4_RD_MSEL_DLY_SHIFT      52
+#define TCTRL4_WRDATA_THLD	0x000c000000000000UL
+#define TCTRL4_WRDATA_THLD_SHIFT      50
+#define TCTRL4_RDWR_RD_RI_DLY	0x0003f00000000000UL
+#define TCTRL4_RDWR_RD_RI_DLY_SHIFT   44
+#define TCTRL4_AUTO_PRECHG_ENBL	0x0000080000000000UL
+#define TCTRL4_AUTO_PRECHG_ENBL_SHIFT 43
+#define TCTRL4_RD_WR_PI_MORE_DLY 0x000007c000000000UL
+#define TCTRL4_RD_WR_PI_MORE_DLY_SHIFT 38
+#define TCTRL4_RD_WR_TI_DLY	0x0000003f00000000UL
+#define TCTRL4_RD_WR_TI_DLY_SHIFT     32
+#define TCTRL4_WR_WR_PI_MORE_DLY 0x00000000f8000000UL
+#define TCTRL4_WR_WR_PI_MORE_DLY_SHIFT 27
+#define TCTRL4_WR_WR_TI_DLY	0x0000000007e00000UL
+#define TCTRL4_WR_WR_TI_DLY_SHIFT     21
+#define TCTRL4_RDWR_RD_PI_MORE_DLY 0x00000000001f000UL0
+#define TCTRL4_RDWR_RD_PI_MORE_DLY_SHIFT 16
+#define TCTRL4_R		0x0000000000008000UL
+#define TCTRL4_R_SHIFT		      15
+#define TCTRL4_SDRAM_MODE_REG_DATA 0x0000000000007fffUL
+#define TCTRL4_SDRAM_MODE_REG_DATA_SHIFT 0
+
+/* All 4 memory address decoding registers have the
+ * same layout.
+ */
+#define MEM_DECODE_VALID	0x8000000000000000UL /* Valid */
+#define MEM_DECODE_VALID_SHIFT	      63
+#define MEM_DECODE_UK		0x001ffe0000000000UL /* Upper mask */
+#define MEM_DECODE_UK_SHIFT	      41
+#define MEM_DECODE_UM		0x0000001ffff00000UL /* Upper match */
+#define MEM_DECODE_UM_SHIFT	      20
+#define MEM_DECODE_LK		0x000000000003c000UL /* Lower mask */
+#define MEM_DECODE_LK_SHIFT	      14
+#define MEM_DECODE_LM		0x0000000000000f00UL /* Lower match */
+#define MEM_DECODE_LM_SHIFT           8
+
+#define PA_UPPER_BITS		0x000007fffc000000UL
+#define PA_UPPER_BITS_SHIFT	26
+#define PA_LOWER_BITS		0x00000000000003c0UL
+#define PA_LOWER_BITS_SHIFT	6
+
+#define MACTRL_R0		         0x8000000000000000UL
+#define MACTRL_R0_SHIFT		         63
+#define MACTRL_ADDR_LE_PW                0x7000000000000000UL
+#define MACTRL_ADDR_LE_PW_SHIFT		 60
+#define MACTRL_CMD_PW                    0x0f00000000000000UL
+#define MACTRL_CMD_PW_SHIFT		 56
+#define MACTRL_HALF_MODE_WR_MSEL_DLY     0x00fc000000000000UL
+#define MACTRL_HALF_MODE_WR_MSEL_DLY_SHIFT 50
+#define MACTRL_HALF_MODE_RD_MSEL_DLY     0x0003f00000000000UL
+#define MACTRL_HALF_MODE_RD_MSEL_DLY_SHIFT 44
+#define MACTRL_HALF_MODE_SDRAM_CTL_DLY   0x00000f0000000000UL
+#define MACTRL_HALF_MODE_SDRAM_CTL_DLY_SHIFT 40
+#define MACTRL_HALF_MODE_SDRAM_CLK_DLY   0x000000e000000000UL
+#define MACTRL_HALF_MODE_SDRAM_CLK_DLY_SHIFT 37
+#define MACTRL_R1                        0x0000001000000000UL
+#define MACTRL_R1_SHIFT                      36
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3 0x0000000f00000000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B3_SHIFT 32
+#define MACTRL_ENC_INTLV_B3              0x00000000f8000000UL
+#define MACTRL_ENC_INTLV_B3_SHIFT              27
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2 0x0000000007800000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B2_SHIFT 23
+#define MACTRL_ENC_INTLV_B2              0x00000000007c0000UL
+#define MACTRL_ENC_INTLV_B2_SHIFT              18
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1 0x000000000003c000UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B1_SHIFT 14
+#define MACTRL_ENC_INTLV_B1              0x0000000000003e00UL
+#define MACTRL_ENC_INTLV_B1_SHIFT               9
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0 0x00000000000001e0UL
+#define MACTRL_BANKSEL_N_ROWADDR_SIZE_B0_SHIFT  5
+#define MACTRL_ENC_INTLV_B0              0x000000000000001fUL
+#define MACTRL_ENC_INTLV_B0_SHIFT               0
+
+#endif /* _SPARC64_CHMCTRL_H */
diff --git a/arch/sparc/include/asm/clock.h b/arch/sparc/include/asm/clock.h
new file mode 100644
index 000000000000..2cf99dadec56
--- /dev/null
+++ b/arch/sparc/include/asm/clock.h
@@ -0,0 +1,11 @@
+/*
+ * clock.h:  Definitions for clock operations on the Sparc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_CLOCK_H
+#define _SPARC_CLOCK_H
+
+/* Foo for now. */
+
+#endif /* !(_SPARC_CLOCK_H) */
diff --git a/arch/sparc/include/asm/cmt.h b/arch/sparc/include/asm/cmt.h
new file mode 100644
index 000000000000..870db5928577
--- /dev/null
+++ b/arch/sparc/include/asm/cmt.h
@@ -0,0 +1,59 @@
+#ifndef _SPARC64_CMT_H
+#define _SPARC64_CMT_H
+
+/* cmt.h: Chip Multi-Threading register definitions
+ *
+ * Copyright (C) 2004 David S. Miller (davem@redhat.com)
+ */
+
+/* ASI_CORE_ID - private */
+#define LP_ID		0x0000000000000010UL
+#define  LP_ID_MAX	0x00000000003f0000UL
+#define  LP_ID_ID	0x000000000000003fUL
+
+/* ASI_INTR_ID - private */
+#define LP_INTR_ID	0x0000000000000000UL
+#define  LP_INTR_ID_ID	0x00000000000003ffUL
+
+/* ASI_CESR_ID - private */
+#define CESR_ID		0x0000000000000040UL
+#define  CESR_ID_ID	0x00000000000000ffUL
+
+/* ASI_CORE_AVAILABLE - shared */
+#define LP_AVAIL	0x0000000000000000UL
+#define  LP_AVAIL_1	0x0000000000000002UL
+#define  LP_AVAIL_0	0x0000000000000001UL
+
+/* ASI_CORE_ENABLE_STATUS - shared */
+#define LP_ENAB_STAT	0x0000000000000010UL
+#define  LP_ENAB_STAT_1	0x0000000000000002UL
+#define  LP_ENAB_STAT_0	0x0000000000000001UL
+
+/* ASI_CORE_ENABLE - shared */
+#define LP_ENAB		0x0000000000000020UL
+#define  LP_ENAB_1	0x0000000000000002UL
+#define  LP_ENAB_0	0x0000000000000001UL
+
+/* ASI_CORE_RUNNING - shared */
+#define LP_RUNNING_RW	0x0000000000000050UL
+#define LP_RUNNING_W1S	0x0000000000000060UL
+#define LP_RUNNING_W1C	0x0000000000000068UL
+#define  LP_RUNNING_1	0x0000000000000002UL
+#define  LP_RUNNING_0	0x0000000000000001UL
+
+/* ASI_CORE_RUNNING_STAT - shared */
+#define LP_RUN_STAT	0x0000000000000058UL
+#define  LP_RUN_STAT_1	0x0000000000000002UL
+#define  LP_RUN_STAT_0	0x0000000000000001UL
+
+/* ASI_XIR_STEERING - shared */
+#define LP_XIR_STEER	0x0000000000000030UL
+#define  LP_XIR_STEER_1	0x0000000000000002UL
+#define  LP_XIR_STEER_0	0x0000000000000001UL
+
+/* ASI_CMT_ERROR_STEERING - shared */
+#define CMT_ER_STEER	0x0000000000000040UL
+#define  CMT_ER_STEER_1	0x0000000000000002UL
+#define  CMT_ER_STEER_0	0x0000000000000001UL
+
+#endif /* _SPARC64_CMT_H */
diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h
new file mode 100644
index 000000000000..f260b58f5ce9
--- /dev/null
+++ b/arch/sparc/include/asm/compat.h
@@ -0,0 +1,243 @@
+#ifndef _ASM_SPARC64_COMPAT_H
+#define _ASM_SPARC64_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+
+#define COMPAT_USER_HZ	100
+
+typedef u32		compat_size_t;
+typedef s32		compat_ssize_t;
+typedef s32		compat_time_t;
+typedef s32		compat_clock_t;
+typedef s32		compat_pid_t;
+typedef u16		__compat_uid_t;
+typedef u16		__compat_gid_t;
+typedef u32		__compat_uid32_t;
+typedef u32		__compat_gid32_t;
+typedef u16		compat_mode_t;
+typedef u32		compat_ino_t;
+typedef u16		compat_dev_t;
+typedef s32		compat_off_t;
+typedef s64		compat_loff_t;
+typedef s16		compat_nlink_t;
+typedef u16		compat_ipc_pid_t;
+typedef s32		compat_daddr_t;
+typedef u32		compat_caddr_t;
+typedef __kernel_fsid_t	compat_fsid_t;
+typedef s32		compat_key_t;
+typedef s32		compat_timer_t;
+
+typedef s32		compat_int_t;
+typedef s32		compat_long_t;
+typedef s64		compat_s64;
+typedef u32		compat_uint_t;
+typedef u32		compat_ulong_t;
+typedef u64		compat_u64;
+
+struct compat_timespec {
+	compat_time_t	tv_sec;
+	s32		tv_nsec;
+};
+
+struct compat_timeval {
+	compat_time_t	tv_sec;
+	s32		tv_usec;
+};
+
+struct compat_stat {
+	compat_dev_t	st_dev;
+	compat_ino_t	st_ino;
+	compat_mode_t	st_mode;
+	compat_nlink_t	st_nlink;
+	__compat_uid_t	st_uid;
+	__compat_gid_t	st_gid;
+	compat_dev_t	st_rdev;
+	compat_off_t	st_size;
+	compat_time_t	st_atime;
+	compat_ulong_t	st_atime_nsec;
+	compat_time_t	st_mtime;
+	compat_ulong_t	st_mtime_nsec;
+	compat_time_t	st_ctime;
+	compat_ulong_t	st_ctime_nsec;
+	compat_off_t	st_blksize;
+	compat_off_t	st_blocks;
+	u32		__unused4[2];
+};
+
+struct compat_stat64 {
+	unsigned long long	st_dev;
+
+	unsigned long long	st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+
+	unsigned long long	st_rdev;
+
+	unsigned char	__pad3[8];
+
+	long long	st_size;
+	unsigned int	st_blksize;
+
+	unsigned char	__pad4[8];
+	unsigned int	st_blocks;
+
+	unsigned int	st_atime;
+	unsigned int	st_atime_nsec;
+
+	unsigned int	st_mtime;
+	unsigned int	st_mtime_nsec;
+
+	unsigned int	st_ctime;
+	unsigned int	st_ctime_nsec;
+
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+
+struct compat_flock {
+	short		l_type;
+	short		l_whence;
+	compat_off_t	l_start;
+	compat_off_t	l_len;
+	compat_pid_t	l_pid;
+	short		__unused;
+};
+
+#define F_GETLK64	12
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+struct compat_flock64 {
+	short		l_type;
+	short		l_whence;
+	compat_loff_t	l_start;
+	compat_loff_t	l_len;
+	compat_pid_t	l_pid;
+	short		__unused;
+};
+
+struct compat_statfs {
+	int		f_type;
+	int		f_bsize;
+	int		f_blocks;
+	int		f_bfree;
+	int		f_bavail;
+	int		f_files;
+	int		f_ffree;
+	compat_fsid_t	f_fsid;
+	int		f_namelen;	/* SunOS ignores this field. */
+	int		f_frsize;
+	int		f_spare[5];
+};
+
+#define COMPAT_RLIM_INFINITY 0x7fffffff
+
+typedef u32		compat_old_sigset_t;
+
+#define _COMPAT_NSIG		64
+#define _COMPAT_NSIG_BPW	32
+
+typedef u32		compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX	0x7fffffff
+#define COMPAT_LOFF_T_MAX	0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately converted them already.
+ */
+typedef	u32		compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+	return (void __user *)(unsigned long)uptr;
+}
+
+static inline compat_uptr_t ptr_to_compat(void __user *uptr)
+{
+	return (u32)(unsigned long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+	struct pt_regs *regs = current_thread_info()->kregs;
+	unsigned long usp = regs->u_regs[UREG_I6];
+
+	if (!(test_thread_flag(TIF_32BIT)))
+		usp += STACK_BIAS;
+	else
+		usp &= 0xffffffffUL;
+
+	usp -= len;
+	usp &= ~0x7UL;
+
+	return (void __user *) usp;
+}
+
+struct compat_ipc64_perm {
+	compat_key_t key;
+	__compat_uid32_t uid;
+	__compat_gid32_t gid;
+	__compat_uid32_t cuid;
+	__compat_gid32_t cgid;
+	unsigned short __pad1;
+	compat_mode_t mode;
+	unsigned short __pad2;
+	unsigned short seq;
+	unsigned long __unused1;	/* yes they really are 64bit pads */
+	unsigned long __unused2;
+};
+
+struct compat_semid64_ds {
+	struct compat_ipc64_perm sem_perm;
+	unsigned int	__pad1;
+	compat_time_t	sem_otime;
+	unsigned int	__pad2;
+	compat_time_t	sem_ctime;
+	u32		sem_nsems;
+	u32		__unused1;
+	u32		__unused2;
+};
+
+struct compat_msqid64_ds {
+	struct compat_ipc64_perm msg_perm;
+	unsigned int	__pad1;
+	compat_time_t	msg_stime;
+	unsigned int	__pad2;
+	compat_time_t	msg_rtime;
+	unsigned int	__pad3;
+	compat_time_t	msg_ctime;
+	unsigned int	msg_cbytes;
+	unsigned int	msg_qnum;
+	unsigned int	msg_qbytes;
+	compat_pid_t	msg_lspid;
+	compat_pid_t	msg_lrpid;
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+};
+
+struct compat_shmid64_ds {
+	struct compat_ipc64_perm shm_perm;
+	unsigned int	__pad1;
+	compat_time_t	shm_atime;
+	unsigned int	__pad2;
+	compat_time_t	shm_dtime;
+	unsigned int	__pad3;
+	compat_time_t	shm_ctime;
+	compat_size_t	shm_segsz;
+	compat_pid_t	shm_cpid;
+	compat_pid_t	shm_lpid;
+	unsigned int	shm_nattch;
+	unsigned int	__unused1;
+	unsigned int	__unused2;
+};
+
+#endif /* _ASM_SPARC64_COMPAT_H */
diff --git a/arch/sparc/include/asm/compat_signal.h b/arch/sparc/include/asm/compat_signal.h
new file mode 100644
index 000000000000..b759eab9b51c
--- /dev/null
+++ b/arch/sparc/include/asm/compat_signal.h
@@ -0,0 +1,29 @@
+#ifndef _COMPAT_SIGNAL_H
+#define _COMPAT_SIGNAL_H
+
+#include <linux/compat.h>
+#include <asm/signal.h>
+
+#ifdef CONFIG_COMPAT
+struct __new_sigaction32 {
+	unsigned		sa_handler;
+	unsigned int    	sa_flags;
+	unsigned		sa_restorer;     /* not used by Linux/SPARC yet */
+	compat_sigset_t 	sa_mask;
+};
+
+struct __old_sigaction32 {
+	unsigned		sa_handler;
+	compat_old_sigset_t  	sa_mask;
+	unsigned int    	sa_flags;
+	unsigned		sa_restorer;     /* not used by Linux/SPARC yet */
+};
+
+typedef struct sigaltstack32 {
+	u32			ss_sp;
+	int			ss_flags;
+	compat_size_t		ss_size;
+} stack_t32;
+#endif
+
+#endif /* !(_COMPAT_SIGNAL_H) */
diff --git a/arch/sparc/include/asm/contregs.h b/arch/sparc/include/asm/contregs.h
new file mode 100644
index 000000000000..48fa8a4ef357
--- /dev/null
+++ b/arch/sparc/include/asm/contregs.h
@@ -0,0 +1,53 @@
+#ifndef _SPARC_CONTREGS_H
+#define _SPARC_CONTREGS_H
+
+/* contregs.h:  Addresses of registers in the ASI_CONTROL alternate address
+ *              space. These are for the mmu's context register, etc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* 3=sun3
+   4=sun4 (as in sun4 sysmaint student book)
+   c=sun4c (according to davem) */
+
+#define AC_IDPROM     0x00000000    /* 34  ID PROM, R/O, byte, 32 bytes      */
+#define AC_PAGEMAP    0x10000000    /* 3   Pagemap R/W, long                 */
+#define AC_SEGMAP     0x20000000    /* 3   Segment map, byte                 */
+#define AC_CONTEXT    0x30000000    /* 34c current mmu-context               */
+#define AC_SENABLE    0x40000000    /* 34c system dvma/cache/reset enable reg*/
+#define AC_UDVMA_ENB  0x50000000    /* 34  Not used on Sun boards, byte      */
+#define AC_BUS_ERROR  0x60000000    /* 34  Not cleared on read, byte.        */
+#define AC_SYNC_ERR   0x60000000    /*  c fault type                         */
+#define AC_SYNC_VA    0x60000004    /*  c fault virtual address              */
+#define AC_ASYNC_ERR  0x60000008    /*  c asynchronous fault type            */
+#define AC_ASYNC_VA   0x6000000c    /*  c async fault virtual address        */
+#define AC_LEDS       0x70000000    /* 34  Zero turns on LEDs, byte          */
+#define AC_CACHETAGS  0x80000000    /* 34c direct access to the VAC tags     */
+#define AC_CACHEDDATA 0x90000000    /* 3 c direct access to the VAC data     */
+#define AC_UDVMA_MAP  0xD0000000    /* 4  Not used on Sun boards, byte       */
+#define AC_VME_VECTOR 0xE0000000    /* 4  For non-Autovector VME, byte       */
+#define AC_BOOT_SCC   0xF0000000    /* 34  bypass to access Zilog 8530. byte.*/
+
+/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress        */
+#define AC_M_PCR      0x0000        /* shv Processor Control Reg             */
+#define AC_M_CTPR     0x0100        /* shv Context Table Pointer Reg         */
+#define AC_M_CXR      0x0200        /* shv Context Register                  */
+#define AC_M_SFSR     0x0300        /* shv Synchronous Fault Status Reg      */
+#define AC_M_SFAR     0x0400        /* shv Synchronous Fault Address Reg     */
+#define AC_M_AFSR     0x0500        /*  hv Asynchronous Fault Status Reg     */
+#define AC_M_AFAR     0x0600        /*  hv Asynchronous Fault Address Reg    */
+#define AC_M_RESET    0x0700        /*  hv Reset Reg                         */
+#define AC_M_RPR      0x1000        /*  hv Root Pointer Reg                  */
+#define AC_M_TSUTRCR  0x1000        /* s   TLB Replacement Ctrl Reg          */
+#define AC_M_IAPTP    0x1100        /*  hv Instruction Access PTP            */
+#define AC_M_DAPTP    0x1200        /*  hv Data Access PTP                   */
+#define AC_M_ITR      0x1300        /*  hv Index Tag Register                */
+#define AC_M_TRCR     0x1400        /*  hv TLB Replacement Control Reg       */
+#define AC_M_SFSRX    0x1300        /* s   Synch Fault Status Reg prim       */
+#define AC_M_SFARX    0x1400        /* s   Synch Fault Address Reg prim      */
+#define AC_M_RPR1     0x1500        /*  h  Root Pointer Reg (entry 2)        */
+#define AC_M_IAPTP1   0x1600        /*  h  Instruction Access PTP (entry 2)  */
+#define AC_M_DAPTP1   0x1700        /*  h  Data Access PTP (entry 2)         */
+
+#endif /* _SPARC_CONTREGS_H */
diff --git a/arch/sparc/include/asm/cpudata.h b/arch/sparc/include/asm/cpudata.h
new file mode 100644
index 000000000000..b5976de7cacd
--- /dev/null
+++ b/arch/sparc/include/asm/cpudata.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_CPUDATA_H
+#define ___ASM_SPARC_CPUDATA_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/cpudata_64.h>
+#else
+#include <asm/cpudata_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/cpudata_32.h b/arch/sparc/include/asm/cpudata_32.h
new file mode 100644
index 000000000000..31d48a0e32c7
--- /dev/null
+++ b/arch/sparc/include/asm/cpudata_32.h
@@ -0,0 +1,27 @@
+/* cpudata.h: Per-cpu parameters.
+ *
+ * Copyright (C) 2004 Keith M Wesolowski (wesolows@foobazco.org)
+ *
+ * Based on include/asm/cpudata.h and Linux 2.4 smp.h
+ * both (C) David S. Miller.
+ */
+
+#ifndef _SPARC_CPUDATA_H
+#define _SPARC_CPUDATA_H
+
+#include <linux/percpu.h>
+
+typedef struct {
+	unsigned long udelay_val;
+	unsigned long clock_tick;
+	unsigned int multiplier;
+	unsigned int counter;
+	int prom_node;
+	int mid;
+	int next;
+} cpuinfo_sparc;
+
+DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
+#define cpu_data(__cpu) per_cpu(__cpu_data, (__cpu))
+
+#endif /* _SPARC_CPUDATA_H */
diff --git a/arch/sparc/include/asm/cpudata_64.h b/arch/sparc/include/asm/cpudata_64.h
new file mode 100644
index 000000000000..532975ecfe10
--- /dev/null
+++ b/arch/sparc/include/asm/cpudata_64.h
@@ -0,0 +1,240 @@
+/* cpudata.h: Per-cpu parameters.
+ *
+ * Copyright (C) 2003, 2005, 2006 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_CPUDATA_H
+#define _SPARC64_CPUDATA_H
+
+#include <asm/hypervisor.h>
+#include <asm/asi.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/percpu.h>
+#include <linux/threads.h>
+
+typedef struct {
+	/* Dcache line 1 */
+	unsigned int	__softirq_pending; /* must be 1st, see rtrap.S */
+	unsigned int	__pad0;
+	unsigned long	clock_tick;	/* %tick's per second */
+	unsigned long	__pad;
+	unsigned int	__pad1;
+	unsigned int	__pad2;
+
+	/* Dcache line 2, rarely used */
+	unsigned int	dcache_size;
+	unsigned int	dcache_line_size;
+	unsigned int	icache_size;
+	unsigned int	icache_line_size;
+	unsigned int	ecache_size;
+	unsigned int	ecache_line_size;
+	int		core_id;
+	int		proc_id;
+} cpuinfo_sparc;
+
+DECLARE_PER_CPU(cpuinfo_sparc, __cpu_data);
+#define cpu_data(__cpu)		per_cpu(__cpu_data, (__cpu))
+#define local_cpu_data()	__get_cpu_var(__cpu_data)
+
+/* Trap handling code needs to get at a few critical values upon
+ * trap entry and to process TSB misses.  These cannot be in the
+ * per_cpu() area as we really need to lock them into the TLB and
+ * thus make them part of the main kernel image.  As a result we
+ * try to make this as small as possible.
+ *
+ * This is padded out and aligned to 64-bytes to avoid false sharing
+ * on SMP.
+ */
+
+/* If you modify the size of this structure, please update
+ * TRAP_BLOCK_SZ_SHIFT below.
+ */
+struct thread_info;
+struct trap_per_cpu {
+/* D-cache line 1: Basic thread information, cpu and device mondo queues */
+	struct thread_info	*thread;
+	unsigned long		pgd_paddr;
+	unsigned long		cpu_mondo_pa;
+	unsigned long		dev_mondo_pa;
+
+/* D-cache line 2: Error Mondo Queue and kernel buffer pointers */
+	unsigned long		resum_mondo_pa;
+	unsigned long		resum_kernel_buf_pa;
+	unsigned long		nonresum_mondo_pa;
+	unsigned long		nonresum_kernel_buf_pa;
+
+/* Dcache lines 3, 4, 5, and 6: Hypervisor Fault Status */
+	struct hv_fault_status	fault_info;
+
+/* Dcache line 7: Physical addresses of CPU send mondo block and CPU list.  */
+	unsigned long		cpu_mondo_block_pa;
+	unsigned long		cpu_list_pa;
+	unsigned long		tsb_huge;
+	unsigned long		tsb_huge_temp;
+
+/* Dcache line 8: IRQ work list, and keep trap_block a power-of-2 in size.  */
+	unsigned long		irq_worklist_pa;
+	unsigned int		cpu_mondo_qmask;
+	unsigned int		dev_mondo_qmask;
+	unsigned int		resum_qmask;
+	unsigned int		nonresum_qmask;
+	void			*hdesc;
+} __attribute__((aligned(64)));
+extern struct trap_per_cpu trap_block[NR_CPUS];
+extern void init_cur_cpu_trap(struct thread_info *);
+extern void setup_tba(void);
+extern int ncpus_probed;
+extern void __init cpu_probe(void);
+extern const struct seq_operations cpuinfo_op;
+
+extern unsigned long real_hard_smp_processor_id(void);
+
+struct cpuid_patch_entry {
+	unsigned int	addr;
+	unsigned int	cheetah_safari[4];
+	unsigned int	cheetah_jbus[4];
+	unsigned int	starfire[4];
+	unsigned int	sun4v[4];
+};
+extern struct cpuid_patch_entry __cpuid_patch, __cpuid_patch_end;
+
+struct sun4v_1insn_patch_entry {
+	unsigned int	addr;
+	unsigned int	insn;
+};
+extern struct sun4v_1insn_patch_entry __sun4v_1insn_patch,
+	__sun4v_1insn_patch_end;
+
+struct sun4v_2insn_patch_entry {
+	unsigned int	addr;
+	unsigned int	insns[2];
+};
+extern struct sun4v_2insn_patch_entry __sun4v_2insn_patch,
+	__sun4v_2insn_patch_end;
+
+#endif /* !(__ASSEMBLY__) */
+
+#define TRAP_PER_CPU_THREAD		0x00
+#define TRAP_PER_CPU_PGD_PADDR		0x08
+#define TRAP_PER_CPU_CPU_MONDO_PA	0x10
+#define TRAP_PER_CPU_DEV_MONDO_PA	0x18
+#define TRAP_PER_CPU_RESUM_MONDO_PA	0x20
+#define TRAP_PER_CPU_RESUM_KBUF_PA	0x28
+#define TRAP_PER_CPU_NONRESUM_MONDO_PA	0x30
+#define TRAP_PER_CPU_NONRESUM_KBUF_PA	0x38
+#define TRAP_PER_CPU_FAULT_INFO		0x40
+#define TRAP_PER_CPU_CPU_MONDO_BLOCK_PA	0xc0
+#define TRAP_PER_CPU_CPU_LIST_PA	0xc8
+#define TRAP_PER_CPU_TSB_HUGE		0xd0
+#define TRAP_PER_CPU_TSB_HUGE_TEMP	0xd8
+#define TRAP_PER_CPU_IRQ_WORKLIST_PA	0xe0
+#define TRAP_PER_CPU_CPU_MONDO_QMASK	0xe8
+#define TRAP_PER_CPU_DEV_MONDO_QMASK	0xec
+#define TRAP_PER_CPU_RESUM_QMASK	0xf0
+#define TRAP_PER_CPU_NONRESUM_QMASK	0xf4
+
+#define TRAP_BLOCK_SZ_SHIFT		8
+
+#include <asm/scratchpad.h>
+
+#define __GET_CPUID(REG)				\
+	/* Spitfire implementation (default). */	\
+661:	ldxa		[%g0] ASI_UPA_CONFIG, REG;	\
+	srlx		REG, 17, REG;			\
+	 and		REG, 0x1f, REG;			\
+	nop;						\
+	.section	.cpuid_patch, "ax";		\
+	/* Instruction location. */			\
+	.word		661b;				\
+	/* Cheetah Safari implementation. */		\
+	ldxa		[%g0] ASI_SAFARI_CONFIG, REG;	\
+	srlx		REG, 17, REG;			\
+	and		REG, 0x3ff, REG;		\
+	nop;						\
+	/* Cheetah JBUS implementation. */		\
+	ldxa		[%g0] ASI_JBUS_CONFIG, REG;	\
+	srlx		REG, 17, REG;			\
+	and		REG, 0x1f, REG;			\
+	nop;						\
+	/* Starfire implementation. */			\
+	sethi		%hi(0x1fff40000d0 >> 9), REG;	\
+	sllx		REG, 9, REG;			\
+	or		REG, 0xd0, REG;			\
+	lduwa		[REG] ASI_PHYS_BYPASS_EC_E, REG;\
+	/* sun4v implementation. */			\
+	mov		SCRATCHPAD_CPUID, REG;		\
+	ldxa		[REG] ASI_SCRATCHPAD, REG;	\
+	nop;						\
+	nop;						\
+	.previous;
+
+#ifdef CONFIG_SMP
+
+#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	__GET_CPUID(TMP)			\
+	sethi	%hi(trap_block), DEST;		\
+	sllx	TMP, TRAP_BLOCK_SZ_SHIFT, TMP;	\
+	or	DEST, %lo(trap_block), DEST;	\
+	add	DEST, TMP, DEST;		\
+
+/* Clobbers TMP, current address space PGD phys address into DEST.  */
+#define TRAP_LOAD_PGD_PHYS(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
+
+/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
+#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)	\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	add	DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
+
+/* Clobbers TMP, loads DEST with current thread info pointer.  */
+#define TRAP_LOAD_THREAD_REG(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_THREAD], DEST;
+
+/* Given the current thread info pointer in THR, load the per-cpu
+ * area base of the current processor into DEST.  REG1, REG2, and REG3 are
+ * clobbered.
+ *
+ * You absolutely cannot use DEST as a temporary in this code.  The
+ * reason is that traps can happen during execution, and return from
+ * trap will load the fully resolved DEST per-cpu base.  This can corrupt
+ * the calculations done by the macro mid-stream.
+ */
+#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)	\
+	lduh	[THR + TI_CPU], REG1;			\
+	sethi	%hi(__per_cpu_shift), REG3;		\
+	sethi	%hi(__per_cpu_base), REG2;		\
+	ldx	[REG3 + %lo(__per_cpu_shift)], REG3;	\
+	ldx	[REG2 + %lo(__per_cpu_base)], REG2;	\
+	sllx	REG1, REG3, REG3;			\
+	add	REG3, REG2, DEST;
+
+#else
+
+#define TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	sethi	%hi(trap_block), DEST;		\
+	or	DEST, %lo(trap_block), DEST;	\
+
+/* Uniprocessor versions, we know the cpuid is zero.  */
+#define TRAP_LOAD_PGD_PHYS(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_PGD_PADDR], DEST;
+
+/* Clobbers TMP, loads local processor's IRQ work area into DEST.  */
+#define TRAP_LOAD_IRQ_WORK_PA(DEST, TMP)	\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	add	DEST, TRAP_PER_CPU_IRQ_WORKLIST_PA, DEST;
+
+#define TRAP_LOAD_THREAD_REG(DEST, TMP)		\
+	TRAP_LOAD_TRAP_BLOCK(DEST, TMP)		\
+	ldx	[DEST + TRAP_PER_CPU_THREAD], DEST;
+
+/* No per-cpu areas on uniprocessor, so no need to load DEST.  */
+#define LOAD_PER_CPU_BASE(DEST, THR, REG1, REG2, REG3)
+
+#endif /* !(CONFIG_SMP) */
+
+#endif /* _SPARC64_CPUDATA_H */
diff --git a/arch/sparc/include/asm/cputime.h b/arch/sparc/include/asm/cputime.h
new file mode 100644
index 000000000000..1a642b81e019
--- /dev/null
+++ b/arch/sparc/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __SPARC_CPUTIME_H
+#define __SPARC_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __SPARC_CPUTIME_H */
diff --git a/arch/sparc/include/asm/current.h b/arch/sparc/include/asm/current.h
new file mode 100644
index 000000000000..10a0df55a574
--- /dev/null
+++ b/arch/sparc/include/asm/current.h
@@ -0,0 +1,34 @@
+/* include/asm/current.h
+ *
+ * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright (C) 2002 Pete Zaitcev (zaitcev@yahoo.com)
+ * Copyright (C) 2007 David S. Miller (davem@davemloft.net)
+ *
+ *  Derived from "include/asm-s390/current.h" by
+ *  Martin Schwidefsky (schwidefsky@de.ibm.com)
+ *  Derived from "include/asm-i386/current.h"
+*/
+#ifndef _SPARC_CURRENT_H
+#define _SPARC_CURRENT_H
+
+#include <linux/thread_info.h>
+
+#ifdef CONFIG_SPARC64
+register struct task_struct *current asm("g4");
+#endif
+
+#ifdef CONFIG_SPARC32
+/* We might want to consider using %g4 like sparc64 to shave a few cycles.
+ *
+ * Two stage process (inline + #define) for type-checking.
+ * We also obfuscate get_current() to check if anyone used that by mistake.
+ */
+struct task_struct;
+static inline struct task_struct *__get_current(void)
+{
+	return current_thread_info()->task;
+}
+#define current __get_current()
+#endif
+
+#endif /* !(_SPARC_CURRENT_H) */
diff --git a/arch/sparc/include/asm/cypress.h b/arch/sparc/include/asm/cypress.h
new file mode 100644
index 000000000000..95e9772ea394
--- /dev/null
+++ b/arch/sparc/include/asm/cypress.h
@@ -0,0 +1,79 @@
+/*
+ * cypress.h: Cypress module specific definitions and defines.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_CYPRESS_H
+#define _SPARC_CYPRESS_H
+
+/* Cypress chips have %psr 'impl' of '0001' and 'vers' of '0001'. */
+
+/* The MMU control register fields on the Sparc Cypress 604/605 MMU's.
+ *
+ * ---------------------------------------------------------------
+ * |implvers| MCA | MCM |MV| MID |BM| C|RSV|MR|CM|CL|CE|RSV|NF|ME|
+ * ---------------------------------------------------------------
+ *  31    24 23-22 21-20 19 18-15 14 13  12 11 10  9  8 7-2  1  0
+ *
+ * MCA: MultiChip Access -- Used for configuration of multiple
+ *      CY7C604/605 cache units.
+ * MCM: MultiChip Mask -- Again, for multiple cache unit config.
+ * MV: MultiChip Valid -- Indicates MCM and MCA have valid settings.
+ * MID: ModuleID -- Unique processor ID for MBus transactions. (605 only)
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ * C: Cacheable -- Indicates whether accesses are cacheable while
+ *    the MMU is off.  0=no 1=yes
+ * MR: MemoryReflection -- Indicates whether the bus attached to the
+ *     MBus supports memory reflection. 0=no 1=yes (605 only)
+ * CM: CacheMode -- Indicates whether the cache is operating in write
+ *     through or copy-back mode. 0=write-through 1=copy-back
+ * CL: CacheLock -- Indicates if the entire cache is locked or not.
+ *     0=not-locked 1=locked  (604 only)
+ * CE: CacheEnable -- Is the virtual cache on? 0=no 1=yes
+ * NF: NoFault -- Do faults generate traps? 0=yes 1=no
+ * ME: MmuEnable -- Is the MMU doing translations? 0=no 1=yes
+ */
+
+#define CYPRESS_MCA       0x00c00000
+#define CYPRESS_MCM       0x00300000
+#define CYPRESS_MVALID    0x00080000
+#define CYPRESS_MIDMASK   0x00078000   /* Only on 605 */
+#define CYPRESS_BMODE     0x00004000
+#define CYPRESS_ACENABLE  0x00002000
+#define CYPRESS_MRFLCT    0x00000800   /* Only on 605 */
+#define CYPRESS_CMODE     0x00000400
+#define CYPRESS_CLOCK     0x00000200   /* Only on 604 */
+#define CYPRESS_CENABLE   0x00000100
+#define CYPRESS_NFAULT    0x00000002
+#define CYPRESS_MENABLE   0x00000001
+
+static inline void cypress_flush_page(unsigned long page)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (page), "i" (ASI_M_FLUSH_PAGE));
+}
+
+static inline void cypress_flush_segment(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_SEG));
+}
+
+static inline void cypress_flush_region(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+			     "r" (addr), "i" (ASI_M_FLUSH_REGION));
+}
+
+static inline void cypress_flush_context(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" : :
+			     "i" (ASI_M_FLUSH_CTX));
+}
+
+/* XXX Displacement flushes for buggy chips and initial testing
+ * XXX go here.
+ */
+
+#endif /* !(_SPARC_CYPRESS_H) */
diff --git a/arch/sparc/include/asm/dcr.h b/arch/sparc/include/asm/dcr.h
new file mode 100644
index 000000000000..620c9ba642e9
--- /dev/null
+++ b/arch/sparc/include/asm/dcr.h
@@ -0,0 +1,14 @@
+#ifndef _SPARC64_DCR_H
+#define _SPARC64_DCR_H
+
+/* UltraSparc-III/III+ Dispatch Control Register, ASR 0x12 */
+#define DCR_DPE		0x0000000000001000 /* III+: D$ Parity Error Enable	*/
+#define DCR_OBS		0x0000000000000fc0 /* Observability Bus Controls	*/
+#define DCR_BPE		0x0000000000000020 /* Branch Predict Enable		*/
+#define DCR_RPE		0x0000000000000010 /* Return Address Prediction Enable	*/
+#define DCR_SI		0x0000000000000008 /* Single Instruction Disable	*/
+#define DCR_IPE		0x0000000000000004 /* III+: I$ Parity Error Enable	*/
+#define DCR_IFPOE	0x0000000000000002 /* IRQ FP Operation Enable		*/
+#define DCR_MS		0x0000000000000001 /* Multi-Scalar dispatch		*/
+
+#endif /* _SPARC64_DCR_H */
diff --git a/arch/sparc/include/asm/dcu.h b/arch/sparc/include/asm/dcu.h
new file mode 100644
index 000000000000..0f704e106a1b
--- /dev/null
+++ b/arch/sparc/include/asm/dcu.h
@@ -0,0 +1,27 @@
+#ifndef _SPARC64_DCU_H
+#define _SPARC64_DCU_H
+
+#include <linux/const.h>
+
+/* UltraSparc-III Data Cache Unit Control Register */
+#define DCU_CP	_AC(0x0002000000000000,UL) /* Phys Cache Enable w/o mmu	*/
+#define DCU_CV	_AC(0x0001000000000000,UL) /* Virt Cache Enable w/o mmu	*/
+#define DCU_ME	_AC(0x0000800000000000,UL) /* NC-store Merging Enable	*/
+#define DCU_RE	_AC(0x0000400000000000,UL) /* RAW bypass Enable		*/
+#define DCU_PE	_AC(0x0000200000000000,UL) /* PCache Enable		*/
+#define DCU_HPE	_AC(0x0000100000000000,UL) /* HW prefetch Enable	*/
+#define DCU_SPE	_AC(0x0000080000000000,UL) /* SW prefetch Enable	*/
+#define DCU_SL	_AC(0x0000040000000000,UL) /* Secondary ld-steering Enab*/
+#define DCU_WE	_AC(0x0000020000000000,UL) /* WCache enable		*/
+#define DCU_PM	_AC(0x000001fe00000000,UL) /* PA Watchpoint Byte Mask	*/
+#define DCU_VM	_AC(0x00000001fe000000,UL) /* VA Watchpoint Byte Mask	*/
+#define DCU_PR	_AC(0x0000000001000000,UL) /* PA Watchpoint Read Enable	*/
+#define DCU_PW	_AC(0x0000000000800000,UL) /* PA Watchpoint Write Enable*/
+#define DCU_VR	_AC(0x0000000000400000,UL) /* VA Watchpoint Read Enable	*/
+#define DCU_VW	_AC(0x0000000000200000,UL) /* VA Watchpoint Write Enable*/
+#define DCU_DM	_AC(0x0000000000000008,UL) /* DMMU Enable		*/
+#define DCU_IM	_AC(0x0000000000000004,UL) /* IMMU Enable		*/
+#define DCU_DC	_AC(0x0000000000000002,UL) /* Data Cache Enable		*/
+#define DCU_IC	_AC(0x0000000000000001,UL) /* Instruction Cache Enable	*/
+
+#endif /* _SPARC64_DCU_H */
diff --git a/arch/sparc/include/asm/delay.h b/arch/sparc/include/asm/delay.h
new file mode 100644
index 000000000000..467caa2a97a0
--- /dev/null
+++ b/arch/sparc/include/asm/delay.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DELAY_H
+#define ___ASM_SPARC_DELAY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/delay_64.h>
+#else
+#include <asm/delay_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/delay_32.h b/arch/sparc/include/asm/delay_32.h
new file mode 100644
index 000000000000..bc9aba2bead6
--- /dev/null
+++ b/arch/sparc/include/asm/delay_32.h
@@ -0,0 +1,34 @@
+/*
+ * delay.h: Linux delay routines on the Sparc.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu).
+ */
+
+#ifndef __SPARC_DELAY_H
+#define __SPARC_DELAY_H
+
+#include <asm/cpudata.h>
+
+static inline void __delay(unsigned long loops)
+{
+	__asm__ __volatile__("cmp %0, 0\n\t"
+			     "1: bne 1b\n\t"
+			     "subcc %0, 1, %0\n" :
+			     "=&r" (loops) :
+			     "0" (loops) :
+			     "cc");
+}
+
+/* This is too messy with inline asm on the Sparc. */
+extern void __udelay(unsigned long usecs, unsigned long lpj);
+extern void __ndelay(unsigned long nsecs, unsigned long lpj);
+
+#ifdef CONFIG_SMP
+#define __udelay_val	cpu_data(smp_processor_id()).udelay_val
+#else /* SMP */
+#define __udelay_val	loops_per_jiffy
+#endif /* SMP */
+#define udelay(__usecs)	__udelay(__usecs, __udelay_val)
+#define ndelay(__nsecs)	__ndelay(__nsecs, __udelay_val)
+
+#endif /* defined(__SPARC_DELAY_H) */
diff --git a/arch/sparc/include/asm/delay_64.h b/arch/sparc/include/asm/delay_64.h
new file mode 100644
index 000000000000..a77aa622d762
--- /dev/null
+++ b/arch/sparc/include/asm/delay_64.h
@@ -0,0 +1,17 @@
+/* delay.h: Linux delay routines on sparc64.
+ *
+ * Copyright (C) 1996, 2004, 2007 David S. Miller (davem@davemloft.net).
+ */
+
+#ifndef _SPARC64_DELAY_H
+#define _SPARC64_DELAY_H
+
+#ifndef __ASSEMBLY__
+
+extern void __delay(unsigned long loops);
+extern void udelay(unsigned long usecs);
+#define mdelay(n)	udelay((n) * 1000)
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _SPARC64_DELAY_H */
diff --git a/arch/sparc/include/asm/device.h b/arch/sparc/include/asm/device.h
new file mode 100644
index 000000000000..19790eb99cc6
--- /dev/null
+++ b/arch/sparc/include/asm/device.h
@@ -0,0 +1,23 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#ifndef _ASM_SPARC_DEVICE_H
+#define _ASM_SPARC_DEVICE_H
+
+struct device_node;
+struct of_device;
+
+struct dev_archdata {
+	void			*iommu;
+	void			*stc;
+	void			*host_controller;
+
+	struct device_node	*prom_node;
+	struct of_device	*op;
+
+	int			numa_node;
+};
+
+#endif /* _ASM_SPARC_DEVICE_H */
diff --git a/arch/sparc/include/asm/display7seg.h b/arch/sparc/include/asm/display7seg.h
new file mode 100644
index 000000000000..86d4a901df24
--- /dev/null
+++ b/arch/sparc/include/asm/display7seg.h
@@ -0,0 +1,79 @@
+/*
+ *
+ * display7seg - Driver interface for the 7-segment display
+ * present on Sun Microsystems CP1400 and CP1500
+ *
+ * Copyright (c) 2000 Eric Brower <ebrower@usa.net>
+ *
+ */
+
+#ifndef __display7seg_h__
+#define __display7seg_h__
+
+#define D7S_IOC	'p'
+
+#define D7SIOCRD _IOR(D7S_IOC, 0x45, int)	/* Read device state	*/
+#define D7SIOCWR _IOW(D7S_IOC, 0x46, int)	/* Write device state	*/
+#define D7SIOCTM _IO (D7S_IOC, 0x47)		/* Translate mode (FLIP)*/
+
+/*
+ * ioctl flag definitions
+ *
+ * POINT	- Toggle decimal point	(0=absent 1=present)
+ * ALARM	- Toggle alarm LED 		(0=green  1=red)
+ * FLIP		- Toggle inverted mode 	(0=normal 1=flipped)
+ * bits 0-4	- Character displayed	(see definitions below)
+ *
+ * Display segments are defined as follows,
+ * subject to D7S_FLIP register state:
+ *
+ *    a
+ *   ---
+ * f|   |b
+ *   -g-
+ * e|   |c
+ *   ---
+ *    d
+ */
+
+#define D7S_POINT	(1 << 7)	/* Decimal point*/
+#define D7S_ALARM	(1 << 6)	/* Alarm LED 	*/
+#define D7S_FLIP	(1 << 5)	/* Flip display */
+
+#define D7S_0		0x00		/* Numerals 0-9 */
+#define D7S_1		0x01
+#define D7S_2		0x02
+#define D7S_3		0x03
+#define D7S_4		0x04
+#define D7S_5		0x05
+#define D7S_6		0x06
+#define D7S_7		0x07
+#define D7S_8		0x08
+#define D7S_9		0x09
+#define D7S_A		0x0A		/* Letters A-F, H, L, P */
+#define D7S_B		0x0B
+#define D7S_C		0x0C
+#define D7S_D		0x0D
+#define D7S_E		0x0E
+#define D7S_F		0x0F
+#define D7S_H		0x10
+#define D7S_E2		0x11
+#define D7S_L		0x12
+#define D7S_P		0x13
+#define D7S_SEGA	0x14		/* Individual segments */
+#define D7S_SEGB	0x15
+#define D7S_SEGC	0x16
+#define D7S_SEGD	0x17
+#define D7S_SEGE	0x18
+#define D7S_SEGF	0x19
+#define D7S_SEGG	0x1A
+#define D7S_SEGABFG 0x1B		/* Segment groupings */
+#define D7S_SEGCDEG	0x1C
+#define D7S_SEGBCEF 0x1D
+#define D7S_SEGADG	0x1E
+#define D7S_BLANK	0x1F		/* Clear all segments */
+
+#define D7S_MIN_VAL	0x0
+#define D7S_MAX_VAL	0x1F
+
+#endif /* ifndef __display7seg_h__ */
diff --git a/arch/sparc/include/asm/div64.h b/arch/sparc/include/asm/div64.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/arch/sparc/include/asm/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/sparc/include/asm/dma-mapping.h b/arch/sparc/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..0f4150e26619
--- /dev/null
+++ b/arch/sparc/include/asm/dma-mapping.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DMA_MAPPING_H
+#define ___ASM_SPARC_DMA_MAPPING_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/dma-mapping_64.h>
+#else
+#include <asm/dma-mapping_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/dma-mapping_32.h b/arch/sparc/include/asm/dma-mapping_32.h
new file mode 100644
index 000000000000..f3a641e6b2c8
--- /dev/null
+++ b/arch/sparc/include/asm/dma-mapping_32.h
@@ -0,0 +1,11 @@
+#ifndef _ASM_SPARC_DMA_MAPPING_H
+#define _ASM_SPARC_DMA_MAPPING_H
+
+
+#ifdef CONFIG_PCI
+#include <asm-generic/dma-mapping.h>
+#else
+#include <asm-generic/dma-mapping-broken.h>
+#endif /* PCI */
+
+#endif /* _ASM_SPARC_DMA_MAPPING_H */
diff --git a/arch/sparc/include/asm/dma-mapping_64.h b/arch/sparc/include/asm/dma-mapping_64.h
new file mode 100644
index 000000000000..bfa64f9702d5
--- /dev/null
+++ b/arch/sparc/include/asm/dma-mapping_64.h
@@ -0,0 +1,154 @@
+#ifndef _ASM_SPARC64_DMA_MAPPING_H
+#define _ASM_SPARC64_DMA_MAPPING_H
+
+#include <linux/scatterlist.h>
+#include <linux/mm.h>
+
+#define DMA_ERROR_CODE	(~(dma_addr_t)0x0)
+
+struct dma_ops {
+	void *(*alloc_coherent)(struct device *dev, size_t size,
+				dma_addr_t *dma_handle, gfp_t flag);
+	void (*free_coherent)(struct device *dev, size_t size,
+			      void *cpu_addr, dma_addr_t dma_handle);
+	dma_addr_t (*map_single)(struct device *dev, void *cpu_addr,
+				 size_t size,
+				 enum dma_data_direction direction);
+	void (*unmap_single)(struct device *dev, dma_addr_t dma_addr,
+			     size_t size,
+			     enum dma_data_direction direction);
+	int (*map_sg)(struct device *dev, struct scatterlist *sg, int nents,
+		      enum dma_data_direction direction);
+	void (*unmap_sg)(struct device *dev, struct scatterlist *sg,
+			 int nhwentries,
+			 enum dma_data_direction direction);
+	void (*sync_single_for_cpu)(struct device *dev,
+				    dma_addr_t dma_handle, size_t size,
+				    enum dma_data_direction direction);
+	void (*sync_sg_for_cpu)(struct device *dev, struct scatterlist *sg,
+				int nelems,
+				enum dma_data_direction direction);
+};
+extern const struct dma_ops *dma_ops;
+
+extern int dma_supported(struct device *dev, u64 mask);
+extern int dma_set_mask(struct device *dev, u64 dma_mask);
+
+static inline void *dma_alloc_coherent(struct device *dev, size_t size,
+				       dma_addr_t *dma_handle, gfp_t flag)
+{
+	return dma_ops->alloc_coherent(dev, size, dma_handle, flag);
+}
+
+static inline void dma_free_coherent(struct device *dev, size_t size,
+				     void *cpu_addr, dma_addr_t dma_handle)
+{
+	dma_ops->free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
+static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
+					size_t size,
+					enum dma_data_direction direction)
+{
+	return dma_ops->map_single(dev, cpu_addr, size, direction);
+}
+
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+				    size_t size,
+				    enum dma_data_direction direction)
+{
+	dma_ops->unmap_single(dev, dma_addr, size, direction);
+}
+
+static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
+				      unsigned long offset, size_t size,
+				      enum dma_data_direction direction)
+{
+	return dma_ops->map_single(dev, page_address(page) + offset,
+				   size, direction);
+}
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+				  size_t size,
+				  enum dma_data_direction direction)
+{
+	dma_ops->unmap_single(dev, dma_address, size, direction);
+}
+
+static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
+			     int nents, enum dma_data_direction direction)
+{
+	return dma_ops->map_sg(dev, sg, nents, direction);
+}
+
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+				int nents, enum dma_data_direction direction)
+{
+	dma_ops->unmap_sg(dev, sg, nents, direction);
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev,
+					   dma_addr_t dma_handle, size_t size,
+					   enum dma_data_direction direction)
+{
+	dma_ops->sync_single_for_cpu(dev, dma_handle, size, direction);
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+					      dma_addr_t dma_handle,
+					      size_t size,
+					      enum dma_data_direction direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+						 dma_addr_t dma_handle,
+						 unsigned long offset,
+						 size_t size,
+						 enum dma_data_direction direction)
+{
+	dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+						    dma_addr_t dma_handle,
+						    unsigned long offset,
+						    size_t size,
+						    enum dma_data_direction direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+				       struct scatterlist *sg, int nelems,
+				       enum dma_data_direction direction)
+{
+	dma_ops->sync_sg_for_cpu(dev, sg, nelems, direction);
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+					  struct scatterlist *sg, int nelems,
+					  enum dma_data_direction direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return (dma_addr == DMA_ERROR_CODE);
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+	/* no easy way to get cache size on all processors, so return
+	 * the maximum possible, to be safe */
+	return (1 << INTERNODE_CACHE_SHIFT);
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+#define dma_is_consistent(d, h)	(1)
+
+#endif /* _ASM_SPARC64_DMA_MAPPING_H */
diff --git a/arch/sparc/include/asm/dma.h b/arch/sparc/include/asm/dma.h
new file mode 100644
index 000000000000..aa1d90ac04c5
--- /dev/null
+++ b/arch/sparc/include/asm/dma.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_DMA_H
+#define ___ASM_SPARC_DMA_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/dma_64.h>
+#else
+#include <asm/dma_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/dma_32.h b/arch/sparc/include/asm/dma_32.h
new file mode 100644
index 000000000000..cf7189c0079b
--- /dev/null
+++ b/arch/sparc/include/asm/dma_32.h
@@ -0,0 +1,288 @@
+/* include/asm/dma.h
+ *
+ * Copyright 1995 (C) David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _ASM_SPARC_DMA_H
+#define _ASM_SPARC_DMA_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+
+#include <asm/vac-ops.h>  /* for invalidate's, etc. */
+#include <asm/sbus.h>
+#include <asm/delay.h>
+#include <asm/oplib.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/spinlock.h>
+
+struct page;
+extern spinlock_t  dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&dma_spin_lock, flags);
+	return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+	spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define MAX_DMA_ADDRESS  (~0UL)
+#define DMA_MODE_READ    1
+#define DMA_MODE_WRITE   2
+
+/* Useful constants */
+#define SIZE_16MB      (16*1024*1024)
+#define SIZE_64K       (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR		0x00UL		/* rw  DMA control/status register    0x00   */
+#define DMA_ADDR	0x04UL		/* rw  DMA transfer address register  0x04   */
+#define DMA_COUNT	0x08UL		/* rw  DMA transfer count register    0x08   */
+#define DMA_TEST	0x0cUL		/* rw  DMA test/debug register        0x0c   */
+
+/* DVMA chip revisions */
+enum dvma_rev {
+	dvmarev0,
+	dvmaesc1,
+	dvmarev1,
+	dvmarev2,
+	dvmarev3,
+	dvmarevplus,
+	dvmahme
+};
+
+#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct sbus_dma {
+	struct sbus_dma *next;
+	struct sbus_dev *sdev;
+	void __iomem *regs;
+
+	/* Status, misc info */
+	int node;                /* Prom node for this DMA device */
+	int running;             /* Are we doing DMA now? */
+	int allocated;           /* Are we "owned" by anyone yet? */
+
+	/* Transfer information. */
+	unsigned long addr;      /* Start address of current transfer */
+	int nbytes;              /* Size of current transfer */
+	int realbytes;           /* For splitting up large transfers, etc. */
+
+	/* DMA revision */
+	enum dvma_rev revision;
+};
+
+extern struct sbus_dma *dma_chain;
+
+/* Broken hardware... */
+#ifdef CONFIG_SUN4
+/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken?
+ * Or is rev0 present only on sun4 boxes? -jj */
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1)
+#else
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
+#endif
+#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
+
+/* Main routines in dma.c */
+extern void dvma_init(struct sbus_bus *);
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_RST_BPP      DMA_RST_SCSI      /* Reset the BPP controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS	 0x000c0000	   /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32	 0x00040000	   /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16	 0x00000000	   /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x00080000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI/BPP: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI/BPP: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_BPP_ON       DMA_SCSI_ON       /* Enable BPP dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs)  ((((regs)->cond_reg) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs)    ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
+#define DMA_WRITE_P(regs)  ((((regs)->cond_reg) & DMA_ST_WRITE))
+#define DMA_OFF(regs)      ((((regs)->cond_reg) &= (~DMA_ENABLE)))
+#define DMA_INTSOFF(regs)  ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
+#define DMA_INTSON(regs)   ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
+#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
+#define DMA_SETSTART(regs, addr)  ((((regs)->st_addr) = (char *) addr))
+#define DMA_BEGINDMA_W(regs) \
+        ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
+#define DMA_BEGINDMA_R(regs) \
+        ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done.  So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler.  You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+   } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+	if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+   } while(0)
+
+#if 0	/* P3 this stuff is inline in ledma.c:init_restart_ledma() */
+/* Pause until counter runs out or BIT isn't set in the DMA condition
+ * register.
+ */
+static inline void sparc_dma_pause(struct sparc_dma_registers *regs,
+				       unsigned long bit)
+{
+	int ctr = 50000;   /* Let's find some bugs ;) */
+
+	/* Busy wait until the bit is not set any more */
+	while((regs->cond_reg&bit) && (ctr>0)) {
+		ctr--;
+		__delay(5);
+	}
+
+	/* Check for bogus outcome. */
+	if(!ctr)
+		panic("DMA timeout");
+}
+
+/* Reset the friggin' thing... */
+#define DMA_RESET(dma) do { \
+	struct sparc_dma_registers *regs = dma->regs;                      \
+	/* Let the current FIFO drain itself */                            \
+	sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN));                         \
+	/* Reset the logic */                                              \
+	regs->cond_reg |= (DMA_RST_SCSI);     /* assert */                 \
+	__delay(400);                         /* let the bits set ;) */    \
+	regs->cond_reg &= ~(DMA_RST_SCSI);    /* de-assert */              \
+	sparc_dma_enable_interrupts(regs);    /* Re-enable interrupts */   \
+	/* Enable FAST transfers if available */                           \
+	if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS;            \
+	dma->running = 0;                                                  \
+} while(0)
+#endif
+
+#define for_each_dvma(dma) \
+        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
+
+extern int get_dma_list(char *);
+extern int request_dma(unsigned int, __const__ char *);
+extern void free_dma(unsigned int);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+/* Routines for data transfer buffers. */
+BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long)
+BTFIXUPDEF_CALL(void,   mmu_unlockarea, char *, unsigned long)
+
+#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len)
+#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len)
+
+/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */
+BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus)
+BTFIXUPDEF_CALL(void,  mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus)
+
+#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus)
+#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus)
+#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus)
+#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus)
+
+/*
+ * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep.
+ *
+ * The mmu_map_dma_area establishes two mappings in one go.
+ * These mappings point to pages normally mapped at 'va' (linear address).
+ * First mapping is for CPU visible address at 'a', uncached.
+ * This is an alias, but it works because it is an uncached mapping.
+ * Second mapping is for device visible address, or "bus" address.
+ * The bus address is returned at '*pba'.
+ *
+ * These functions seem distinct, but are hard to split. On sun4c,
+ * at least for now, 'a' is equal to bus address, and retured in *pba.
+ * On sun4m, page attributes depend on the CPU type, so we have to
+ * know if we are mapping RAM or I/O, so it has to be an additional argument
+ * to a separate mapping function for CPU visible mappings.
+ */
+BTFIXUPDEF_CALL(int,  mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len)
+BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa)
+BTFIXUPDEF_CALL(void,  mmu_unmap_dma_area, unsigned long busa, int len)
+
+#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len)
+#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len)
+#define mmu_translate_dvma(ba)     BTFIXUP_CALL(mmu_translate_dvma)(ba)
+
+#endif /* !(_ASM_SPARC_DMA_H) */
diff --git a/arch/sparc/include/asm/dma_64.h b/arch/sparc/include/asm/dma_64.h
new file mode 100644
index 000000000000..46a8aecffc02
--- /dev/null
+++ b/arch/sparc/include/asm/dma_64.h
@@ -0,0 +1,205 @@
+/*
+ * include/asm/dma.h
+ *
+ * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _ASM_SPARC64_DMA_H
+#define _ASM_SPARC64_DMA_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/spinlock.h>
+
+#include <asm/sbus.h>
+#include <asm/delay.h>
+#include <asm/oplib.h>
+
+/* These are irrelevant for Sparc DMA, but we leave it in so that
+ * things can compile.
+ */
+#define MAX_DMA_CHANNELS 8
+#define DMA_MODE_READ    1
+#define DMA_MODE_WRITE   2
+#define MAX_DMA_ADDRESS  (~0UL)
+
+/* Useful constants */
+#define SIZE_16MB      (16*1024*1024)
+#define SIZE_64K       (64*1024)
+
+/* SBUS DMA controller reg offsets */
+#define DMA_CSR		0x00UL		/* rw  DMA control/status register    0x00   */
+#define DMA_ADDR	0x04UL		/* rw  DMA transfer address register  0x04   */
+#define DMA_COUNT	0x08UL		/* rw  DMA transfer count register    0x08   */
+#define DMA_TEST	0x0cUL		/* rw  DMA test/debug register        0x0c   */
+
+/* DVMA chip revisions */
+enum dvma_rev {
+	dvmarev0,
+	dvmaesc1,
+	dvmarev1,
+	dvmarev2,
+	dvmarev3,
+	dvmarevplus,
+	dvmahme
+};
+
+#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct sbus_dma {
+	struct sbus_dma *next;
+	struct sbus_dev *sdev;
+	void __iomem *regs;
+
+	/* Status, misc info */
+	int node;                /* Prom node for this DMA device */
+	int running;             /* Are we doing DMA now? */
+	int allocated;           /* Are we "owned" by anyone yet? */
+
+	/* Transfer information. */
+	u32 addr;                /* Start address of current transfer */
+	int nbytes;              /* Size of current transfer */
+	int realbytes;           /* For splitting up large transfers, etc. */
+
+	/* DMA revision */
+	enum dvma_rev revision;
+};
+
+extern struct sbus_dma *dma_chain;
+
+/* Broken hardware... */
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
+#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
+
+/* Main routines in dma.c */
+extern void dvma_init(struct sbus_bus *);
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_SCSI_SBUS64  0x00008000        /* HME: Enable 64-bit SBUS mode. */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURSTS	 0x000c0000	   /* ENET: SBUS r/w burst mask */
+#define DMA_E_BURST32	 0x00040000	   /* ENET: SBUS 32 byte r/w burst */
+#define DMA_E_BURST16	 0x00000000	   /* ENET: SBUS 16 byte r/w burst */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x000c0000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+#define DMA_RESET_FAS366 0x08000000        /* HME: Assert RESET to FAS366 */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs)    ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))
+#define DMA_WRITE_P(regs)  ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE))
+#define DMA_OFF(__regs)		\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp &= ~DMA_ENABLE; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_INTSOFF(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp &= ~DMA_INT_ENAB; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_INTSON(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp |= DMA_INT_ENAB; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_PUNTFIFO(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp |= DMA_FIFO_INV; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_SETSTART(__regs, __addr)	\
+	sbus_writel((u32)(__addr), (__regs) + DMA_ADDR);
+#define DMA_BEGINDMA_W(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+#define DMA_BEGINDMA_R(__regs)	\
+do {	u32 tmp = sbus_readl((__regs) + DMA_CSR); \
+	tmp |= (DMA_ENABLE|DMA_INT_ENAB); \
+	tmp &= ~DMA_ST_WRITE; \
+	sbus_writel(tmp, (__regs) + DMA_CSR); \
+} while(0)
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done.  So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler.  You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+   } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+	if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+   } while(0)
+
+#define for_each_dvma(dma) \
+        for((dma) = dma_chain; (dma); (dma) = (dma)->next)
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 	(0)
+#endif
+
+#endif /* !(_ASM_SPARC64_DMA_H) */
diff --git a/arch/sparc/include/asm/ebus.h b/arch/sparc/include/asm/ebus.h
new file mode 100644
index 000000000000..83a6d16c22e6
--- /dev/null
+++ b/arch/sparc/include/asm/ebus.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_EBUS_H
+#define ___ASM_SPARC_EBUS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ebus_64.h>
+#else
+#include <asm/ebus_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/ebus_32.h b/arch/sparc/include/asm/ebus_32.h
new file mode 100644
index 000000000000..29cb7dfc6b79
--- /dev/null
+++ b/arch/sparc/include/asm/ebus_32.h
@@ -0,0 +1,99 @@
+/*
+ * ebus.h: PCI to Ebus pseudo driver software state.
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ *
+ * Adopted for sparc by V. Roganov and G. Raiko.
+ */
+
+#ifndef __SPARC_EBUS_H
+#define __SPARC_EBUS_H
+
+#ifndef _LINUX_IOPORT_H
+#include <linux/ioport.h>
+#endif
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+
+struct linux_ebus_child {
+	struct linux_ebus_child		*next;
+	struct linux_ebus_device	*parent;
+	struct linux_ebus		*bus;
+	struct device_node		*prom_node;
+	struct resource			 resource[PROMREG_MAX];
+	int				 num_addrs;
+	unsigned int			 irqs[PROMINTR_MAX];
+	int				 num_irqs;
+};
+
+struct linux_ebus_device {
+	struct of_device		ofdev;
+	struct linux_ebus_device	*next;
+	struct linux_ebus_child		*children;
+	struct linux_ebus		*bus;
+	struct device_node		*prom_node;
+	struct resource			 resource[PROMREG_MAX];
+	int				 num_addrs;
+	unsigned int			 irqs[PROMINTR_MAX];
+	int				 num_irqs;
+};
+#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev)
+
+struct linux_ebus {
+	struct of_device		ofdev;
+	struct linux_ebus		*next;
+	struct linux_ebus_device	*devices;
+	struct linux_pbm_info		*parent;
+	struct pci_dev			*self;
+	struct device_node		*prom_node;
+};
+#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev)
+
+struct linux_ebus_dma {
+	unsigned int dcsr;
+	unsigned int dacr;
+	unsigned int dbcr;
+};
+
+#define EBUS_DCSR_INT_PEND	0x00000001
+#define EBUS_DCSR_ERR_PEND	0x00000002
+#define EBUS_DCSR_DRAIN		0x00000004
+#define EBUS_DCSR_INT_EN	0x00000010
+#define EBUS_DCSR_RESET		0x00000080
+#define EBUS_DCSR_WRITE		0x00000100
+#define EBUS_DCSR_EN_DMA	0x00000200
+#define EBUS_DCSR_CYC_PEND	0x00000400
+#define EBUS_DCSR_DIAG_RD_DONE	0x00000800
+#define EBUS_DCSR_DIAG_WR_DONE	0x00001000
+#define EBUS_DCSR_EN_CNT	0x00002000
+#define EBUS_DCSR_TC		0x00004000
+#define EBUS_DCSR_DIS_CSR_DRN	0x00010000
+#define EBUS_DCSR_BURST_SZ_MASK	0x000c0000
+#define EBUS_DCSR_BURST_SZ_1	0x00080000
+#define EBUS_DCSR_BURST_SZ_4	0x00000000
+#define EBUS_DCSR_BURST_SZ_8	0x00040000
+#define EBUS_DCSR_BURST_SZ_16	0x000c0000
+#define EBUS_DCSR_DIAG_EN	0x00100000
+#define EBUS_DCSR_DIS_ERR_PEND	0x00400000
+#define EBUS_DCSR_TCI_DIS	0x00800000
+#define EBUS_DCSR_EN_NEXT	0x01000000
+#define EBUS_DCSR_DMA_ON	0x02000000
+#define EBUS_DCSR_A_LOADED	0x04000000
+#define EBUS_DCSR_NA_LOADED	0x08000000
+#define EBUS_DCSR_DEV_ID_MASK	0xf0000000
+
+extern struct linux_ebus		*ebus_chain;
+
+extern void ebus_init(void);
+
+#define for_each_ebus(bus)						\
+        for((bus) = ebus_chain; (bus); (bus) = (bus)->next)
+
+#define for_each_ebusdev(dev, bus)					\
+        for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
+
+#define for_each_edevchild(dev, child)					\
+        for((child) = (dev)->children; (child); (child) = (child)->next)
+
+#endif /* !(__SPARC_EBUS_H) */
diff --git a/arch/sparc/include/asm/ebus_64.h b/arch/sparc/include/asm/ebus_64.h
new file mode 100644
index 000000000000..fcc62b97ced5
--- /dev/null
+++ b/arch/sparc/include/asm/ebus_64.h
@@ -0,0 +1,94 @@
+/*
+ * ebus.h: PCI to Ebus pseudo driver software state.
+ *
+ * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
+ * Copyright (C) 1999 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef __SPARC64_EBUS_H
+#define __SPARC64_EBUS_H
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+
+struct linux_ebus_child {
+	struct linux_ebus_child		*next;
+	struct linux_ebus_device	*parent;
+	struct linux_ebus		*bus;
+	struct device_node		*prom_node;
+	struct resource			 resource[PROMREG_MAX];
+	int				 num_addrs;
+	unsigned int			 irqs[PROMINTR_MAX];
+	int				 num_irqs;
+};
+
+struct linux_ebus_device {
+	struct of_device		ofdev;
+	struct linux_ebus_device	*next;
+	struct linux_ebus_child		*children;
+	struct linux_ebus		*bus;
+	struct device_node		*prom_node;
+	struct resource			 resource[PROMREG_MAX];
+	int				 num_addrs;
+	unsigned int			 irqs[PROMINTR_MAX];
+	int				 num_irqs;
+};
+#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev)
+
+struct linux_ebus {
+	struct of_device		ofdev;
+	struct linux_ebus		*next;
+	struct linux_ebus_device	*devices;
+	struct pci_dev			*self;
+	int				 index;
+	int				 is_rio;
+	struct device_node		*prom_node;
+};
+#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev)
+
+struct ebus_dma_info {
+	spinlock_t	lock;
+	void __iomem	*regs;
+
+	unsigned int	flags;
+#define EBUS_DMA_FLAG_USE_EBDMA_HANDLER		0x00000001
+#define EBUS_DMA_FLAG_TCI_DISABLE		0x00000002
+
+	/* These are only valid is EBUS_DMA_FLAG_USE_EBDMA_HANDLER is
+	 * set.
+	 */
+	void (*callback)(struct ebus_dma_info *p, int event, void *cookie);
+	void *client_cookie;
+	unsigned int	irq;
+#define EBUS_DMA_EVENT_ERROR	1
+#define EBUS_DMA_EVENT_DMA	2
+#define EBUS_DMA_EVENT_DEVICE	4
+
+	unsigned char	name[64];
+};
+
+extern int ebus_dma_register(struct ebus_dma_info *p);
+extern int ebus_dma_irq_enable(struct ebus_dma_info *p, int on);
+extern void ebus_dma_unregister(struct ebus_dma_info *p);
+extern int ebus_dma_request(struct ebus_dma_info *p, dma_addr_t bus_addr,
+			    size_t len);
+extern void ebus_dma_prepare(struct ebus_dma_info *p, int write);
+extern unsigned int ebus_dma_residue(struct ebus_dma_info *p);
+extern unsigned int ebus_dma_addr(struct ebus_dma_info *p);
+extern void ebus_dma_enable(struct ebus_dma_info *p, int on);
+
+extern struct linux_ebus		*ebus_chain;
+
+extern void ebus_init(void);
+
+#define for_each_ebus(bus)						\
+        for((bus) = ebus_chain; (bus); (bus) = (bus)->next)
+
+#define for_each_ebusdev(dev, bus)					\
+        for((dev) = (bus)->devices; (dev); (dev) = (dev)->next)
+
+#define for_each_edevchild(dev, child)					\
+        for((child) = (dev)->children; (child); (child) = (child)->next)
+
+#endif /* !(__SPARC64_EBUS_H) */
diff --git a/arch/sparc/include/asm/ecc.h b/arch/sparc/include/asm/ecc.h
new file mode 100644
index 000000000000..ccb84b66fef1
--- /dev/null
+++ b/arch/sparc/include/asm/ecc.h
@@ -0,0 +1,122 @@
+/*
+ * ecc.h: Definitions and defines for the external cache/memory
+ *        controller on the sun4m.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_ECC_H
+#define _SPARC_ECC_H
+
+/* These registers are accessed through the SRMMU passthrough ASI 0x20 */
+#define ECC_ENABLE     0x00000000       /* ECC enable register */
+#define ECC_FSTATUS    0x00000008       /* ECC fault status register */
+#define ECC_FADDR      0x00000010       /* ECC fault address register */
+#define ECC_DIGNOSTIC  0x00000018       /* ECC diagnostics register */
+#define ECC_MBAENAB    0x00000020       /* MBus arbiter enable register */
+#define ECC_DMESG      0x00001000       /* Diagnostic message passing area */
+
+/* ECC MBus Arbiter Enable register:
+ *
+ * ----------------------------------------
+ * |              |SBUS|MOD3|MOD2|MOD1|RSV|
+ * ----------------------------------------
+ *  31           5   4   3    2    1    0
+ *
+ * SBUS: Enable MBus Arbiter on the SBus 0=off 1=on
+ * MOD3: Enable MBus Arbiter on MBus module 3  0=off 1=on
+ * MOD2: Enable MBus Arbiter on MBus module 2  0=off 1=on
+ * MOD1: Enable MBus Arbiter on MBus module 1  0=off 1=on
+ */
+
+#define ECC_MBAE_SBUS     0x00000010
+#define ECC_MBAE_MOD3     0x00000008
+#define ECC_MBAE_MOD2     0x00000004
+#define ECC_MBAE_MOD1     0x00000002 
+
+/* ECC Fault Control Register layout:
+ *
+ * -----------------------------
+ * |    RESV   | ECHECK | EINT |
+ * -----------------------------
+ *  31        2     1       0
+ *
+ * ECHECK:  Enable ECC checking.  0=off 1=on
+ * EINT:  Enable Interrupts for correctable errors. 0=off 1=on
+ */ 
+#define ECC_FCR_CHECK    0x00000002
+#define ECC_FCR_INTENAB  0x00000001
+
+/* ECC Fault Address Register Zero layout:
+ *
+ * -----------------------------------------------------
+ * | MID | S | RSV |  VA   | BM |AT| C| SZ |TYP| PADDR |
+ * -----------------------------------------------------
+ *  31-28  27 26-22  21-14   13  12 11 10-8 7-4   3-0
+ *
+ * MID: ModuleID of the faulting processor. ie. who did it?
+ * S: Supervisor/Privileged access? 0=no 1=yes
+ * VA: Bits 19-12 of the virtual faulting address, these are the
+ *     superset bits in the virtual cache and can be used for
+ *     a flush operation if necessary.
+ * BM: Boot mode? 0=no 1=yes  This is just like the SRMMU boot
+ *     mode bit.
+ * AT: Did this fault happen during an atomic instruction? 0=no
+ *     1=yes.  This means either an 'ldstub' or 'swap' instruction
+ *     was in progress (but not finished) when this fault happened.
+ *     This indicated whether the bus was locked when the fault
+ *     occurred.
+ * C: Did the pte for this access indicate that it was cacheable?
+ *    0=no 1=yes
+ * SZ: The size of the transaction.
+ * TYP: The transaction type.
+ * PADDR: Bits 35-32 of the physical address for the fault.
+ */
+#define ECC_FADDR0_MIDMASK   0xf0000000
+#define ECC_FADDR0_S         0x08000000
+#define ECC_FADDR0_VADDR     0x003fc000
+#define ECC_FADDR0_BMODE     0x00002000
+#define ECC_FADDR0_ATOMIC    0x00001000
+#define ECC_FADDR0_CACHE     0x00000800
+#define ECC_FADDR0_SIZE      0x00000700
+#define ECC_FADDR0_TYPE      0x000000f0
+#define ECC_FADDR0_PADDR     0x0000000f
+
+/* ECC Fault Address Register One layout:
+ *
+ * -------------------------------------
+ * |          Physical Address 31-0    |
+ * -------------------------------------
+ *  31                               0
+ *
+ * You get the upper 4 bits of the physical address from the
+ * PADDR field in ECC Fault Address Zero register.
+ */
+
+/* ECC Fault Status Register layout:
+ *
+ * ----------------------------------------------
+ * | RESV|C2E|MULT|SYNDROME|DWORD|UNC|TIMEO|BS|C|
+ * ----------------------------------------------
+ *  31-18  17  16    15-8    7-4   3    2    1 0
+ *
+ * C2E: A C2 graphics error occurred. 0=no 1=yes (SS10 only)
+ * MULT: Multiple errors occurred ;-O 0=no 1=prom_panic(yes)
+ * SYNDROME: Controller is mentally unstable.
+ * DWORD:
+ * UNC: Uncorrectable error.  0=no 1=yes
+ * TIMEO: Timeout occurred. 0=no 1=yes
+ * BS: C2 graphics bad slot access. 0=no 1=yes (SS10 only)
+ * C: Correctable error? 0=no 1=yes
+ */
+
+#define ECC_FSR_C2ERR    0x00020000
+#define ECC_FSR_MULT     0x00010000
+#define ECC_FSR_SYND     0x0000ff00
+#define ECC_FSR_DWORD    0x000000f0
+#define ECC_FSR_UNC      0x00000008
+#define ECC_FSR_TIMEO    0x00000004
+#define ECC_FSR_BADSLOT  0x00000002
+#define ECC_FSR_C        0x00000001
+
+#endif /* !(_SPARC_ECC_H) */
diff --git a/arch/sparc/include/asm/eeprom.h b/arch/sparc/include/asm/eeprom.h
new file mode 100644
index 000000000000..e17beeceb405
--- /dev/null
+++ b/arch/sparc/include/asm/eeprom.h
@@ -0,0 +1,9 @@
+/*
+ * eeprom.h:  Definitions for the Sun eeprom.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* The EEPROM and the Mostek Mk48t02 use the same IO address space
+ * for their registers/data areas.  The IDPROM lives here too.
+ */
diff --git a/arch/sparc/include/asm/elf.h b/arch/sparc/include/asm/elf.h
new file mode 100644
index 000000000000..0a2816c50b07
--- /dev/null
+++ b/arch/sparc/include/asm/elf.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_ELF_H
+#define ___ASM_SPARC_ELF_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/elf_64.h>
+#else
+#include <asm/elf_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/elf_32.h b/arch/sparc/include/asm/elf_32.h
new file mode 100644
index 000000000000..d043f80bc2fd
--- /dev/null
+++ b/arch/sparc/include/asm/elf_32.h
@@ -0,0 +1,145 @@
+#ifndef __ASMSPARC_ELF_H
+#define __ASMSPARC_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+
+/*
+ * Sparc section types
+ */
+#define STT_REGISTER		13
+
+/*
+ * Sparc ELF relocation types
+ */
+#define	R_SPARC_NONE		0
+#define	R_SPARC_8		1
+#define	R_SPARC_16		2
+#define	R_SPARC_32		3
+#define	R_SPARC_DISP8		4
+#define	R_SPARC_DISP16		5
+#define	R_SPARC_DISP32		6
+#define	R_SPARC_WDISP30		7
+#define	R_SPARC_WDISP22		8
+#define	R_SPARC_HI22		9
+#define	R_SPARC_22		10
+#define	R_SPARC_13		11
+#define	R_SPARC_LO10		12
+#define	R_SPARC_GOT10		13
+#define	R_SPARC_GOT13		14
+#define	R_SPARC_GOT22		15
+#define	R_SPARC_PC10		16
+#define	R_SPARC_PC22		17
+#define	R_SPARC_WPLT30		18
+#define	R_SPARC_COPY		19
+#define	R_SPARC_GLOB_DAT	20
+#define	R_SPARC_JMP_SLOT	21
+#define	R_SPARC_RELATIVE	22
+#define	R_SPARC_UA32		23
+#define R_SPARC_PLT32		24
+#define R_SPARC_HIPLT22		25
+#define R_SPARC_LOPLT10		26
+#define R_SPARC_PCPLT32		27
+#define R_SPARC_PCPLT22		28
+#define R_SPARC_PCPLT10		29
+#define R_SPARC_10		30
+#define R_SPARC_11		31
+#define R_SPARC_64		32
+#define R_SPARC_OLO10		33
+#define R_SPARC_WDISP16		40
+#define R_SPARC_WDISP19		41
+#define R_SPARC_7		43
+#define R_SPARC_5		44
+#define R_SPARC_6		45
+
+/* Bits present in AT_HWCAP, primarily for Sparc32.  */
+
+#define HWCAP_SPARC_FLUSH       1    /* CPU supports flush instruction. */
+#define HWCAP_SPARC_STBAR       2
+#define HWCAP_SPARC_SWAP        4
+#define HWCAP_SPARC_MULDIV      8
+#define HWCAP_SPARC_V9		16
+#define HWCAP_SPARC_ULTRA3	32
+
+#define CORE_DUMP_USE_REGSET
+
+/* Format is:
+ * 	G0 --> G7
+ *	O0 --> O7
+ *	L0 --> L7
+ *	I0 --> I7
+ *	PSR, PC, nPC, Y, WIM, TBR
+ */
+typedef unsigned long elf_greg_t;
+#define ELF_NGREG 38
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct {
+	union {
+		unsigned long	pr_regs[32];
+		double		pr_dregs[16];
+	} pr_fr;
+	unsigned long __unused;
+	unsigned long	pr_fsr;
+	unsigned char	pr_qcnt;
+	unsigned char	pr_q_entrysize;
+	unsigned char	pr_en;
+	unsigned int	pr_q[64];
+} elf_fpregset_t;
+
+#include <asm/mbus.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_SPARC)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH	EM_SPARC
+#define ELF_CLASS	ELFCLASS32
+#define ELF_DATA	ELFDATA2MSB
+
+#define USE_ELF_CORE_DUMP
+#ifndef CONFIG_SUN4
+#define ELF_EXEC_PAGESIZE	4096
+#else
+#define ELF_EXEC_PAGESIZE	8192
+#endif
+
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         (TASK_UNMAPPED_BASE)
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  This can NOT be done in userspace
+   on Sparc.  */
+
+/* Sun4c has none of the capabilities, most sun4m's have them all.
+ * XXX This is gross, set some global variable at boot time. -DaveM
+ */
+#define ELF_HWCAP	((ARCH_SUN4C_SUN4) ? 0 : \
+			 (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | \
+			  HWCAP_SPARC_SWAP | \
+			  ((srmmu_modtype != Cypress && \
+			    srmmu_modtype != Cypress_vE && \
+			    srmmu_modtype != Cypress_vD) ? \
+			   HWCAP_SPARC_MULDIV : 0)))
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo. */
+
+#define ELF_PLATFORM	(NULL)
+
+#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX)
+
+#endif /* !(__ASMSPARC_ELF_H) */
diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h
new file mode 100644
index 000000000000..0818a1308f4e
--- /dev/null
+++ b/arch/sparc/include/asm/elf_64.h
@@ -0,0 +1,217 @@
+#ifndef __ASM_SPARC64_ELF_H
+#define __ASM_SPARC64_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/spitfire.h>
+
+/*
+ * Sparc section types
+ */
+#define STT_REGISTER		13
+
+/*
+ * Sparc ELF relocation types
+ */
+#define	R_SPARC_NONE		0
+#define	R_SPARC_8		1
+#define	R_SPARC_16		2
+#define	R_SPARC_32		3
+#define	R_SPARC_DISP8		4
+#define	R_SPARC_DISP16		5
+#define	R_SPARC_DISP32		6
+#define	R_SPARC_WDISP30		7
+#define	R_SPARC_WDISP22		8
+#define	R_SPARC_HI22		9
+#define	R_SPARC_22		10
+#define	R_SPARC_13		11
+#define	R_SPARC_LO10		12
+#define	R_SPARC_GOT10		13
+#define	R_SPARC_GOT13		14
+#define	R_SPARC_GOT22		15
+#define	R_SPARC_PC10		16
+#define	R_SPARC_PC22		17
+#define	R_SPARC_WPLT30		18
+#define	R_SPARC_COPY		19
+#define	R_SPARC_GLOB_DAT	20
+#define	R_SPARC_JMP_SLOT	21
+#define	R_SPARC_RELATIVE	22
+#define	R_SPARC_UA32		23
+#define R_SPARC_PLT32		24
+#define R_SPARC_HIPLT22		25
+#define R_SPARC_LOPLT10		26
+#define R_SPARC_PCPLT32		27
+#define R_SPARC_PCPLT22		28
+#define R_SPARC_PCPLT10		29
+#define R_SPARC_10		30
+#define R_SPARC_11		31
+#define R_SPARC_64		32
+#define R_SPARC_OLO10		33
+#define R_SPARC_WDISP16		40
+#define R_SPARC_WDISP19		41
+#define R_SPARC_7		43
+#define R_SPARC_5		44
+#define R_SPARC_6		45
+
+/* Bits present in AT_HWCAP, primarily for Sparc32.  */
+
+#define HWCAP_SPARC_FLUSH       1    /* CPU supports flush instruction. */
+#define HWCAP_SPARC_STBAR       2
+#define HWCAP_SPARC_SWAP        4
+#define HWCAP_SPARC_MULDIV      8
+#define HWCAP_SPARC_V9		16
+#define HWCAP_SPARC_ULTRA3	32
+#define HWCAP_SPARC_BLKINIT	64
+#define HWCAP_SPARC_N2		128
+
+#define CORE_DUMP_USE_REGSET
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_ARCH		EM_SPARCV9
+#define ELF_CLASS		ELFCLASS64
+#define ELF_DATA		ELFDATA2MSB
+
+/* Format of 64-bit elf_gregset_t is:
+ * 	G0 --> G7
+ * 	O0 --> O7
+ * 	L0 --> L7
+ * 	I0 --> I7
+ *	TSTATE
+ *	TPC
+ *	TNPC
+ *	Y
+ */
+typedef unsigned long elf_greg_t;
+#define ELF_NGREG 36
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct {
+	unsigned long	pr_regs[32];
+	unsigned long	pr_fsr;
+	unsigned long	pr_gsr;
+	unsigned long	pr_fprs;
+} elf_fpregset_t;
+
+/* Format of 32-bit elf_gregset_t is:
+ * 	G0 --> G7
+ *	O0 --> O7
+ *	L0 --> L7
+ *	I0 --> I7
+ *	PSR, PC, nPC, Y, WIM, TBR
+ */
+typedef unsigned int compat_elf_greg_t;
+#define COMPAT_ELF_NGREG 38
+typedef compat_elf_greg_t compat_elf_gregset_t[COMPAT_ELF_NGREG];
+
+typedef struct {
+	union {
+		unsigned int	pr_regs[32];
+		unsigned long	pr_dregs[16];
+	} pr_fr;
+	unsigned int __unused;
+	unsigned int	pr_fsr;
+	unsigned char	pr_qcnt;
+	unsigned char	pr_q_entrysize;
+	unsigned char	pr_en;
+	unsigned int	pr_q[64];
+} compat_elf_fpregset_t;
+
+/* UltraSparc extensions.  Still unused, but will be eventually.  */
+typedef struct {
+	unsigned int pr_type;
+	unsigned int pr_align;
+	union {
+		struct {
+			union {
+				unsigned int	pr_regs[32];
+				unsigned long	pr_dregs[16];
+				long double	pr_qregs[8];
+			} pr_xfr;
+		} pr_v8p;
+		unsigned int	pr_xfsr;
+		unsigned int	pr_fprs;
+		unsigned int	pr_xg[8];
+		unsigned int	pr_xo[8];
+		unsigned long	pr_tstate;
+		unsigned int	pr_filler[8];
+	} pr_un;
+} elf_xregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)		((x)->e_machine == ELF_ARCH)
+#define compat_elf_check_arch(x)	((x)->e_machine == EM_SPARC || \
+					 (x)->e_machine == EM_SPARC32PLUS)
+#define compat_start_thread		start_thread32
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	PAGE_SIZE
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE		0x0000010000000000UL
+#define COMPAT_ELF_ET_DYN_BASE	0x0000000070000000UL
+
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+/* On Ultra, we support all of the v8 capabilities. */
+static inline unsigned int sparc64_elf_hwcap(void)
+{
+	unsigned int cap = (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR |
+			    HWCAP_SPARC_SWAP | HWCAP_SPARC_MULDIV |
+			    HWCAP_SPARC_V9);
+
+	if (tlb_type == cheetah || tlb_type == cheetah_plus)
+		cap |= HWCAP_SPARC_ULTRA3;
+	else if (tlb_type == hypervisor) {
+		if (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 ||
+		    sun4v_chip_type == SUN4V_CHIP_NIAGARA2)
+			cap |= HWCAP_SPARC_BLKINIT;
+		if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2)
+			cap |= HWCAP_SPARC_N2;
+	}
+
+	return cap;
+}
+
+#define ELF_HWCAP	sparc64_elf_hwcap();
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM	(NULL)
+
+#define SET_PERSONALITY(ex, ibcs2)			\
+do {	unsigned long new_flags = current_thread_info()->flags; \
+	new_flags &= _TIF_32BIT;			\
+	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)	\
+		new_flags |= _TIF_32BIT;		\
+	else						\
+		new_flags &= ~_TIF_32BIT;		\
+	if ((current_thread_info()->flags & _TIF_32BIT) \
+	    != new_flags)				\
+		set_thread_flag(TIF_ABI_PENDING);	\
+	else						\
+		clear_thread_flag(TIF_ABI_PENDING);	\
+	/* flush_thread will update pgd cache */	\
+	if (ibcs2)					\
+		set_personality(PER_SVR4);		\
+	else if (current->personality != PER_LINUX32)	\
+		set_personality(PER_LINUX);		\
+} while (0)
+
+#endif /* !(__ASM_SPARC64_ELF_H) */
diff --git a/arch/sparc/include/asm/emergency-restart.h b/arch/sparc/include/asm/emergency-restart.h
new file mode 100644
index 000000000000..108d8c48e42e
--- /dev/null
+++ b/arch/sparc/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/sparc/include/asm/envctrl.h b/arch/sparc/include/asm/envctrl.h
new file mode 100644
index 000000000000..624fa7e2da8e
--- /dev/null
+++ b/arch/sparc/include/asm/envctrl.h
@@ -0,0 +1,103 @@
+/*
+ *
+ * envctrl.h: Definitions for access to the i2c environment
+ *            monitoring on Ultrasparc systems.
+ *
+ * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
+ * Copyright (C) 2000  Vinh Truong  (vinh.truong@eng.sun.com)
+ * VT - Add all ioctl commands and environment status definitions
+ * VT - Add application note
+ */
+#ifndef _SPARC64_ENVCTRL_H
+#define _SPARC64_ENVCTRL_H 1
+
+#include <linux/ioctl.h>
+
+/* Application note:
+ *
+ * The driver supports 4 operations: open(), close(), ioctl(), read()
+ * The device name is /dev/envctrl.
+ * Below is sample usage:
+ *
+ *	fd = open("/dev/envtrl", O_RDONLY);
+ *	if (ioctl(fd, ENVCTRL_READ_SHUTDOWN_TEMPERATURE, 0) < 0)
+ *		printf("error\n");
+ *	ret = read(fd, buf, 10);
+ *	close(fd);
+ *
+ * Notice in the case of cpu voltage and temperature, the default is
+ * cpu0.  If we need to know the info of cpu1, cpu2, cpu3, we need to
+ * pass in cpu number in ioctl() last parameter.  For example, to
+ * get the voltage of cpu2:
+ *
+ *	ioctlbuf[0] = 2;
+ *	if (ioctl(fd, ENVCTRL_READ_CPU_VOLTAGE, ioctlbuf) < 0)
+ *		printf("error\n");
+ *	ret = read(fd, buf, 10);
+ *
+ * All the return values are in ascii.  So check read return value
+ * and do appropriate conversions in your application.
+ */
+
+/* IOCTL commands */
+
+/* Note: these commands reflect possible monitor features.
+ * Some boards choose to support some of the features only.
+ */
+#define ENVCTRL_RD_CPU_TEMPERATURE	_IOR('p', 0x40, int)
+#define ENVCTRL_RD_CPU_VOLTAGE		_IOR('p', 0x41, int)
+#define ENVCTRL_RD_FAN_STATUS		_IOR('p', 0x42, int)
+#define ENVCTRL_RD_WARNING_TEMPERATURE	_IOR('p', 0x43, int)
+#define ENVCTRL_RD_SHUTDOWN_TEMPERATURE	_IOR('p', 0x44, int)
+#define ENVCTRL_RD_VOLTAGE_STATUS	_IOR('p', 0x45, int)
+#define ENVCTRL_RD_SCSI_TEMPERATURE	_IOR('p', 0x46, int)
+#define ENVCTRL_RD_ETHERNET_TEMPERATURE	_IOR('p', 0x47, int)
+#define ENVCTRL_RD_MTHRBD_TEMPERATURE	_IOR('p', 0x48, int)
+
+#define ENVCTRL_RD_GLOBALADDRESS	_IOR('p', 0x49, int)
+
+/* Read return values for a voltage status request. */
+#define ENVCTRL_VOLTAGE_POWERSUPPLY_GOOD	0x01
+#define ENVCTRL_VOLTAGE_BAD			0x02
+#define ENVCTRL_POWERSUPPLY_BAD			0x03
+#define ENVCTRL_VOLTAGE_POWERSUPPLY_BAD		0x04
+
+/* Read return values for a fan status request.
+ * A failure match means either the fan fails or
+ * the fan is not connected.  Some boards have optional
+ * connectors to connect extra fans.
+ *
+ * There are maximum 8 monitor fans.  Some are cpu fans
+ * some are system fans.  The mask below only indicates
+ * fan by order number.
+ * Below is a sample application:
+ *
+ *	if (ioctl(fd, ENVCTRL_READ_FAN_STATUS, 0) < 0) {
+ *		printf("ioctl fan failed\n");
+ *	}
+ *	if (read(fd, rslt, 1) <= 0) {
+ *		printf("error or fan not monitored\n");
+ *	} else {
+ *		if (rslt[0] == ENVCTRL_ALL_FANS_GOOD) {
+ *			printf("all fans good\n");
+ *	} else if (rslt[0] == ENVCTRL_ALL_FANS_BAD) {
+ *		printf("all fans bad\n");
+ *	} else {
+ *		if (rslt[0] & ENVCTRL_FAN0_FAILURE_MASK) {
+ *			printf("fan 0 failed or not connected\n");
+ *	}
+ *	......
+ */
+
+#define ENVCTRL_ALL_FANS_GOOD			0x00
+#define ENVCTRL_FAN0_FAILURE_MASK		0x01
+#define ENVCTRL_FAN1_FAILURE_MASK		0x02
+#define ENVCTRL_FAN2_FAILURE_MASK		0x04
+#define ENVCTRL_FAN3_FAILURE_MASK		0x08
+#define ENVCTRL_FAN4_FAILURE_MASK		0x10
+#define ENVCTRL_FAN5_FAILURE_MASK		0x20
+#define ENVCTRL_FAN6_FAILURE_MASK		0x40
+#define ENVCTRL_FAN7_FAILURE_MASK		0x80
+#define ENVCTRL_ALL_FANS_BAD 			0xFF
+
+#endif /* !(_SPARC64_ENVCTRL_H) */
diff --git a/arch/sparc/include/asm/errno.h b/arch/sparc/include/asm/errno.h
new file mode 100644
index 000000000000..a9ef172977de
--- /dev/null
+++ b/arch/sparc/include/asm/errno.h
@@ -0,0 +1,113 @@
+#ifndef _SPARC_ERRNO_H
+#define _SPARC_ERRNO_H
+
+/* These match the SunOS error numbering scheme. */
+
+#include <asm-generic/errno-base.h>
+
+#define	EWOULDBLOCK	EAGAIN	/* Operation would block */
+#define	EINPROGRESS	36	/* Operation now in progress */
+#define	EALREADY	37	/* Operation already in progress */
+#define	ENOTSOCK	38	/* Socket operation on non-socket */
+#define	EDESTADDRREQ	39	/* Destination address required */
+#define	EMSGSIZE	40	/* Message too long */
+#define	EPROTOTYPE	41	/* Protocol wrong type for socket */
+#define	ENOPROTOOPT	42	/* Protocol not available */
+#define	EPROTONOSUPPORT	43	/* Protocol not supported */
+#define	ESOCKTNOSUPPORT	44	/* Socket type not supported */
+#define	EOPNOTSUPP	45	/* Op not supported on transport endpoint */
+#define	EPFNOSUPPORT	46	/* Protocol family not supported */
+#define	EAFNOSUPPORT	47	/* Address family not supported by protocol */
+#define	EADDRINUSE	48	/* Address already in use */
+#define	EADDRNOTAVAIL	49	/* Cannot assign requested address */
+#define	ENETDOWN	50	/* Network is down */
+#define	ENETUNREACH	51	/* Network is unreachable */
+#define	ENETRESET	52	/* Net dropped connection because of reset */
+#define	ECONNABORTED	53	/* Software caused connection abort */
+#define	ECONNRESET	54	/* Connection reset by peer */
+#define	ENOBUFS		55	/* No buffer space available */
+#define	EISCONN		56	/* Transport endpoint is already connected */
+#define	ENOTCONN	57	/* Transport endpoint is not connected */
+#define	ESHUTDOWN	58	/* No send after transport endpoint shutdown */
+#define	ETOOMANYREFS	59	/* Too many references: cannot splice */
+#define	ETIMEDOUT	60	/* Connection timed out */
+#define	ECONNREFUSED	61	/* Connection refused */
+#define	ELOOP		62	/* Too many symbolic links encountered */
+#define	ENAMETOOLONG	63	/* File name too long */
+#define	EHOSTDOWN	64	/* Host is down */
+#define	EHOSTUNREACH	65	/* No route to host */
+#define	ENOTEMPTY	66	/* Directory not empty */
+#define EPROCLIM        67      /* SUNOS: Too many processes */
+#define	EUSERS		68	/* Too many users */
+#define	EDQUOT		69	/* Quota exceeded */
+#define	ESTALE		70	/* Stale NFS file handle */
+#define	EREMOTE		71	/* Object is remote */
+#define	ENOSTR		72	/* Device not a stream */
+#define	ETIME		73	/* Timer expired */
+#define	ENOSR		74	/* Out of streams resources */
+#define	ENOMSG		75	/* No message of desired type */
+#define	EBADMSG		76	/* Not a data message */
+#define	EIDRM		77	/* Identifier removed */
+#define	EDEADLK		78	/* Resource deadlock would occur */
+#define	ENOLCK		79	/* No record locks available */
+#define	ENONET		80	/* Machine is not on the network */
+#define ERREMOTE        81      /* SunOS: Too many lvls of remote in path */
+#define	ENOLINK		82	/* Link has been severed */
+#define	EADV		83	/* Advertise error */
+#define	ESRMNT		84	/* Srmount error */
+#define	ECOMM		85      /* Communication error on send */
+#define	EPROTO		86	/* Protocol error */
+#define	EMULTIHOP	87	/* Multihop attempted */
+#define	EDOTDOT		88	/* RFS specific error */
+#define	EREMCHG		89	/* Remote address changed */
+#define	ENOSYS		90	/* Function not implemented */
+
+/* The rest have no SunOS equivalent. */
+#define	ESTRPIPE	91	/* Streams pipe error */
+#define	EOVERFLOW	92	/* Value too large for defined data type */
+#define	EBADFD		93	/* File descriptor in bad state */
+#define	ECHRNG		94	/* Channel number out of range */
+#define	EL2NSYNC	95	/* Level 2 not synchronized */
+#define	EL3HLT		96	/* Level 3 halted */
+#define	EL3RST		97	/* Level 3 reset */
+#define	ELNRNG		98	/* Link number out of range */
+#define	EUNATCH		99	/* Protocol driver not attached */
+#define	ENOCSI		100	/* No CSI structure available */
+#define	EL2HLT		101	/* Level 2 halted */
+#define	EBADE		102	/* Invalid exchange */
+#define	EBADR		103	/* Invalid request descriptor */
+#define	EXFULL		104	/* Exchange full */
+#define	ENOANO		105	/* No anode */
+#define	EBADRQC		106	/* Invalid request code */
+#define	EBADSLT		107	/* Invalid slot */
+#define	EDEADLOCK	108	/* File locking deadlock error */
+#define	EBFONT		109	/* Bad font file format */
+#define	ELIBEXEC	110	/* Cannot exec a shared library directly */
+#define	ENODATA		111	/* No data available */
+#define	ELIBBAD		112	/* Accessing a corrupted shared library */
+#define	ENOPKG		113	/* Package not installed */
+#define	ELIBACC		114	/* Can not access a needed shared library */
+#define	ENOTUNIQ	115	/* Name not unique on network */
+#define	ERESTART	116	/* Interrupted syscall should be restarted */
+#define	EUCLEAN		117	/* Structure needs cleaning */
+#define	ENOTNAM		118	/* Not a XENIX named type file */
+#define	ENAVAIL		119	/* No XENIX semaphores available */
+#define	EISNAM		120	/* Is a named type file */
+#define	EREMOTEIO	121	/* Remote I/O error */
+#define	EILSEQ		122	/* Illegal byte sequence */
+#define	ELIBMAX		123	/* Atmpt to link in too many shared libs */
+#define	ELIBSCN		124	/* .lib section in a.out corrupted */
+
+#define	ENOMEDIUM	125	/* No medium found */
+#define	EMEDIUMTYPE	126	/* Wrong medium type */
+#define	ECANCELED	127	/* Operation Cancelled */
+#define	ENOKEY		128	/* Required key not available */
+#define	EKEYEXPIRED	129	/* Key has expired */
+#define	EKEYREVOKED	130	/* Key has been revoked */
+#define	EKEYREJECTED	131	/* Key was rejected by service */
+
+/* for robust mutexes */
+#define	EOWNERDEAD	132	/* Owner died */
+#define	ENOTRECOVERABLE	133	/* State not recoverable */
+
+#endif
diff --git a/arch/sparc/include/asm/estate.h b/arch/sparc/include/asm/estate.h
new file mode 100644
index 000000000000..520c08560d1b
--- /dev/null
+++ b/arch/sparc/include/asm/estate.h
@@ -0,0 +1,49 @@
+#ifndef _SPARC64_ESTATE_H
+#define _SPARC64_ESTATE_H
+
+/* UltraSPARC-III E-cache Error Enable */
+#define ESTATE_ERROR_FMT	0x0000000000040000 /* Force MTAG ECC		*/
+#define ESTATE_ERROR_FMESS	0x000000000003c000 /* Forced MTAG ECC val	*/
+#define ESTATE_ERROR_FMD	0x0000000000002000 /* Force DATA ECC		*/
+#define ESTATE_ERROR_FDECC	0x0000000000001ff0 /* Forced DATA ECC val	*/
+#define ESTATE_ERROR_UCEEN	0x0000000000000008 /* See below			*/
+#define ESTATE_ERROR_NCEEN	0x0000000000000002 /* See below			*/
+#define ESTATE_ERROR_CEEN	0x0000000000000001 /* See below			*/
+
+/* UCEEN enables the fast_ECC_error trap for: 1) software correctable E-cache
+ * errors 2) uncorrectable E-cache errors.  Such events only occur on reads
+ * of the E-cache by the local processor for: 1) data loads 2) instruction
+ * fetches 3) atomic operations.  Such events _cannot_ occur for: 1) merge
+ * 2) writeback 2) copyout.  The AFSR bits associated with these traps are
+ * UCC and UCU.
+ */
+
+/* NCEEN enables instruction_access_error, data_access_error, and ECC_error traps
+ * for uncorrectable ECC errors and system errors.
+ *
+ * Uncorrectable system bus data error or MTAG ECC error, system bus TimeOUT,
+ * or system bus BusERR:
+ * 1) As the result of an instruction fetch, will generate instruction_access_error
+ * 2) As the result of a load etc. will generate data_access_error.
+ * 3) As the result of store merge completion, writeback, or copyout will
+ *    generate a disrupting ECC_error trap.
+ * 4) As the result of such errors on instruction vector fetch can generate any
+ *    of the 3 trap types.
+ *
+ * The AFSR bits associated with these traps are EMU, EDU, WDU, CPU, IVU, UE,
+ * BERR, and TO.
+ */
+
+/* CEEN enables the ECC_error trap for hardware corrected ECC errors.  System bus
+ * reads resulting in a hardware corrected data or MTAG ECC error will generate an
+ * ECC_error disrupting trap with this bit enabled.
+ *
+ * This same trap will also be generated when a hardware corrected ECC error results
+ * during store merge, writeback, and copyout operations.
+ */
+
+/* In general, if the trap enable bits above are disabled the AFSR bits will still
+ * log the events even though the trap will not be generated by the processor.
+ */
+
+#endif /* _SPARC64_ESTATE_H */
diff --git a/arch/sparc/include/asm/fb.h b/arch/sparc/include/asm/fb.h
new file mode 100644
index 000000000000..b83e44729655
--- /dev/null
+++ b/arch/sparc/include/asm/fb.h
@@ -0,0 +1,29 @@
+#ifndef _SPARC_FB_H_
+#define _SPARC_FB_H_
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+#include <asm/prom.h>
+
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+				unsigned long off)
+{
+#ifdef CONFIG_SPARC64
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+#endif
+}
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+	struct device *dev = info->device;
+	struct device_node *node;
+
+	node = dev->archdata.prom_node;
+	if (node &&
+	    node == of_console_device)
+		return 1;
+
+	return 0;
+}
+
+#endif /* _SPARC_FB_H_ */
diff --git a/arch/sparc/include/asm/fbio.h b/arch/sparc/include/asm/fbio.h
new file mode 100644
index 000000000000..b9215a0907d3
--- /dev/null
+++ b/arch/sparc/include/asm/fbio.h
@@ -0,0 +1,330 @@
+#ifndef __LINUX_FBIO_H
+#define __LINUX_FBIO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* Constants used for fbio SunOS compatibility */
+/* (C) 1996 Miguel de Icaza */
+
+/* Frame buffer types */
+#define FBTYPE_NOTYPE           -1
+#define FBTYPE_SUN1BW           0   /* mono */
+#define FBTYPE_SUN1COLOR        1 
+#define FBTYPE_SUN2BW           2 
+#define FBTYPE_SUN2COLOR        3 
+#define FBTYPE_SUN2GP           4 
+#define FBTYPE_SUN5COLOR        5 
+#define FBTYPE_SUN3COLOR        6 
+#define FBTYPE_MEMCOLOR         7 
+#define FBTYPE_SUN4COLOR        8 
+ 
+#define FBTYPE_NOTSUN1          9 
+#define FBTYPE_NOTSUN2          10
+#define FBTYPE_NOTSUN3          11
+ 
+#define FBTYPE_SUNFAST_COLOR    12  /* cg6 */
+#define FBTYPE_SUNROP_COLOR     13
+#define FBTYPE_SUNFB_VIDEO      14
+#define FBTYPE_SUNGIFB          15
+#define FBTYPE_SUNGPLAS         16
+#define FBTYPE_SUNGP3           17
+#define FBTYPE_SUNGT            18
+#define FBTYPE_SUNLEO           19      /* zx Leo card */
+#define FBTYPE_MDICOLOR         20      /* cg14 */
+#define FBTYPE_TCXCOLOR		21	/* SUNW,tcx card */
+
+#define FBTYPE_LASTPLUSONE      21	/* This is not last + 1 in fact... */
+
+/* Does not seem to be listed in the Sun file either */
+#define FBTYPE_CREATOR          22
+#define FBTYPE_PCI_IGA1682	23
+#define FBTYPE_P9100COLOR	24
+
+#define FBTYPE_PCI_GENERIC	1000
+#define FBTYPE_PCI_MACH64	1001
+
+/* fbio ioctls */
+/* Returned by FBIOGTYPE */
+struct  fbtype {
+        int     fb_type;        /* fb type, see above */
+        int     fb_height;      /* pixels */
+        int     fb_width;       /* pixels */
+        int     fb_depth;
+        int     fb_cmsize;      /* color map entries */
+        int     fb_size;        /* fb size in bytes */
+};
+#define FBIOGTYPE _IOR('F', 0, struct fbtype)
+
+struct  fbcmap {
+        int             index;          /* first element (0 origin) */
+        int             count;
+        unsigned char   __user *red;
+        unsigned char   __user *green;
+        unsigned char   __user *blue;
+};
+
+#ifdef __KERNEL__
+#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap)
+#else
+#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP _IOW('F', 4, struct fbcmap)
+#endif
+
+/* # of device specific values */
+#define FB_ATTR_NDEVSPECIFIC    8
+/* # of possible emulations */
+#define FB_ATTR_NEMUTYPES       4
+ 
+struct fbsattr {
+        int     flags;
+        int     emu_type;	/* -1 if none */
+        int     dev_specific[FB_ATTR_NDEVSPECIFIC];
+};
+ 
+struct fbgattr {
+        int     real_type;	/* real frame buffer type */
+        int     owner;		/* unknown */
+        struct fbtype fbtype;	/* real frame buffer fbtype */
+        struct fbsattr sattr;   
+        int     emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */
+};
+#define FBIOSATTR  _IOW('F', 5, struct fbgattr) /* Unsupported: */
+#define FBIOGATTR  _IOR('F', 6, struct fbgattr)	/* supported */
+
+#define FBIOSVIDEO _IOW('F', 7, int)
+#define FBIOGVIDEO _IOR('F', 8, int)
+
+struct fbcursor {
+        short set;              /* what to set, choose from the list above */
+        short enable;           /* cursor on/off */
+        struct fbcurpos pos;    /* cursor position */
+        struct fbcurpos hot;    /* cursor hot spot */
+        struct fbcmap cmap;     /* color map info */
+        struct fbcurpos size;   /* cursor bit map size */
+        char __user *image;     /* cursor image bits */
+        char __user *mask;      /* cursor mask bits */
+};
+
+/* set/get cursor attributes/shape */
+#define FBIOSCURSOR     _IOW('F', 24, struct fbcursor)
+#define FBIOGCURSOR     _IOWR('F', 25, struct fbcursor)
+ 
+/* set/get cursor position */
+#define FBIOSCURPOS     _IOW('F', 26, struct fbcurpos)
+#define FBIOGCURPOS     _IOW('F', 27, struct fbcurpos)
+ 
+/* get max cursor size */
+#define FBIOGCURMAX     _IOR('F', 28, struct fbcurpos)
+
+/* wid manipulation */
+struct fb_wid_alloc {
+#define FB_WID_SHARED_8		0
+#define FB_WID_SHARED_24	1
+#define FB_WID_DBL_8		2
+#define FB_WID_DBL_24		3
+	__u32	wa_type;
+	__s32	wa_index;	/* Set on return */
+	__u32	wa_count;	
+};
+struct fb_wid_item {
+	__u32	wi_type;
+	__s32	wi_index;
+	__u32	wi_attrs;
+	__u32	wi_values[32];
+};
+struct fb_wid_list {
+	__u32	wl_flags;
+	__u32	wl_count;
+	struct fb_wid_item	*wl_list;
+};
+
+#define FBIO_WID_ALLOC	_IOWR('F', 30, struct fb_wid_alloc)
+#define FBIO_WID_FREE	_IOW('F', 31, struct fb_wid_alloc)
+#define FBIO_WID_PUT	_IOW('F', 32, struct fb_wid_list)
+#define FBIO_WID_GET	_IOWR('F', 33, struct fb_wid_list)
+
+/* Creator ioctls */
+#define FFB_IOCTL	('F'<<8)
+#define FFB_SYS_INFO		(FFB_IOCTL|80)
+#define FFB_CLUTREAD		(FFB_IOCTL|81)
+#define FFB_CLUTPOST		(FFB_IOCTL|82)
+#define FFB_SETDIAGMODE		(FFB_IOCTL|83)
+#define FFB_GETMONITORID	(FFB_IOCTL|84)
+#define FFB_GETVIDEOMODE	(FFB_IOCTL|85)
+#define FFB_SETVIDEOMODE	(FFB_IOCTL|86)
+#define FFB_SETSERVER		(FFB_IOCTL|87)
+#define FFB_SETOVCTL		(FFB_IOCTL|88)
+#define FFB_GETOVCTL		(FFB_IOCTL|89)
+#define FFB_GETSAXNUM		(FFB_IOCTL|90)
+#define FFB_FBDEBUG		(FFB_IOCTL|91)
+
+/* Cg14 ioctls */
+#define MDI_IOCTL          ('M'<<8)
+#define MDI_RESET          (MDI_IOCTL|1)
+#define MDI_GET_CFGINFO    (MDI_IOCTL|2)
+#define MDI_SET_PIXELMODE  (MDI_IOCTL|3)
+#    define MDI_32_PIX     32
+#    define MDI_16_PIX     16
+#    define MDI_8_PIX      8
+
+struct mdi_cfginfo {
+	int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
+        int     mdi_type;       /* FBTYPE name */
+        int     mdi_height;     /* height */
+        int     mdi_width;      /* widht */
+        int     mdi_size;       /* available ram */
+        int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
+        int     mdi_pixfreq;    /* pixel clock (from PROM) */
+};
+
+/* SparcLinux specific ioctl for the MDI, should be replaced for
+ * the SET_XLUT/SET_CLUTn ioctls instead
+ */
+#define MDI_CLEAR_XLUT       (MDI_IOCTL|9)
+
+/* leo & ffb ioctls */
+struct fb_clut_alloc {
+	__u32	clutid;	/* Set on return */
+ 	__u32	flag;
+ 	__u32	index;
+};
+
+struct fb_clut {
+#define FB_CLUT_WAIT	0x00000001	/* Not yet implemented */
+ 	__u32	flag;
+ 	__u32	clutid;
+ 	__u32	offset;
+ 	__u32	count;
+ 	char *	red;
+ 	char *	green;
+ 	char *	blue;
+};
+
+struct fb_clut32 {
+ 	__u32	flag;
+ 	__u32	clutid;
+ 	__u32	offset;
+ 	__u32	count;
+ 	__u32	red;
+ 	__u32	green;
+ 	__u32	blue;
+};
+
+#define LEO_CLUTALLOC	_IOWR('L', 53, struct fb_clut_alloc)
+#define LEO_CLUTFREE	_IOW('L', 54, struct fb_clut_alloc)
+#define LEO_CLUTREAD	_IOW('L', 55, struct fb_clut)
+#define LEO_CLUTPOST	_IOW('L', 56, struct fb_clut)
+#define LEO_SETGAMMA	_IOW('L', 68, int) /* Not yet implemented */
+#define LEO_GETGAMMA	_IOR('L', 69, int) /* Not yet implemented */
+
+#ifdef __KERNEL__
+/* Addresses on the fd of a cgsix that are mappable */
+#define CG6_FBC    0x70000000
+#define CG6_TEC    0x70001000
+#define CG6_BTREGS 0x70002000
+#define CG6_FHC    0x70004000
+#define CG6_THC    0x70005000
+#define CG6_ROM    0x70006000
+#define CG6_RAM    0x70016000
+#define CG6_DHC    0x80000000
+
+#define CG3_MMAP_OFFSET 0x4000000
+
+/* Addresses on the fd of a tcx that are mappable */
+#define TCX_RAM8BIT   		0x00000000
+#define TCX_RAM24BIT   		0x01000000
+#define TCX_UNK3   		0x10000000
+#define TCX_UNK4   		0x20000000
+#define TCX_CONTROLPLANE   	0x28000000
+#define TCX_UNK6   		0x30000000
+#define TCX_UNK7   		0x38000000
+#define TCX_TEC    		0x70000000
+#define TCX_BTREGS 		0x70002000
+#define TCX_THC    		0x70004000
+#define TCX_DHC    		0x70008000
+#define TCX_ALT	   		0x7000a000
+#define TCX_SYNC   		0x7000e000
+#define TCX_UNK2    		0x70010000
+
+/* CG14 definitions */
+
+/* Offsets into the OBIO space: */
+#define CG14_REGS        0       /* registers */
+#define CG14_CURSORREGS  0x1000  /* cursor registers */
+#define CG14_DACREGS     0x2000  /* DAC registers */
+#define CG14_XLUT        0x3000  /* X Look Up Table -- ??? */
+#define CG14_CLUT1       0x4000  /* Color Look Up Table */
+#define CG14_CLUT2       0x5000  /* Color Look Up Table */
+#define CG14_CLUT3       0x6000  /* Color Look Up Table */
+#define CG14_AUTO	 0xf000
+
+#endif /* KERNEL */
+
+/* These are exported to userland for applications to use */
+/* Mappable offsets for the cg14: control registers */
+#define MDI_DIRECT_MAP 0x10000000
+#define MDI_CTLREG_MAP 0x20000000
+#define MDI_CURSOR_MAP 0x30000000
+#define MDI_SHDW_VRT_MAP 0x40000000
+
+/* Mappable offsets for the cg14: frame buffer resolutions */
+/* 32 bits */
+#define MDI_CHUNKY_XBGR_MAP 0x50000000
+#define MDI_CHUNKY_BGR_MAP 0x60000000
+
+/* 16 bits */
+#define MDI_PLANAR_X16_MAP 0x70000000
+#define MDI_PLANAR_C16_MAP 0x80000000
+
+/* 8 bit is done as CG3 MMAP offset */
+/* 32 bits, planar */
+#define MDI_PLANAR_X32_MAP 0x90000000
+#define MDI_PLANAR_B32_MAP 0xa0000000
+#define MDI_PLANAR_G32_MAP 0xb0000000
+#define MDI_PLANAR_R32_MAP 0xc0000000
+
+/* Mappable offsets on leo */
+#define LEO_SS0_MAP            0x00000000
+#define LEO_LC_SS0_USR_MAP     0x00800000
+#define LEO_LD_SS0_MAP         0x00801000
+#define LEO_LX_CURSOR_MAP      0x00802000
+#define LEO_SS1_MAP            0x00803000
+#define LEO_LC_SS1_USR_MAP     0x01003000
+#define LEO_LD_SS1_MAP         0x01004000
+#define LEO_UNK_MAP            0x01005000
+#define LEO_LX_KRN_MAP         0x01006000
+#define LEO_LC_SS0_KRN_MAP     0x01007000
+#define LEO_LC_SS1_KRN_MAP     0x01008000
+#define LEO_LD_GBL_MAP         0x01009000
+#define LEO_UNK2_MAP           0x0100a000
+
+#ifdef __KERNEL__
+struct  fbcmap32 {
+	int             index;          /* first element (0 origin) */
+	int             count;
+	u32		red;
+	u32		green;
+	u32		blue;
+};
+
+#define FBIOPUTCMAP32	_IOW('F', 3, struct fbcmap32)
+#define FBIOGETCMAP32	_IOW('F', 4, struct fbcmap32)
+
+struct fbcursor32 {
+	short set;		/* what to set, choose from the list above */
+	short enable;		/* cursor on/off */
+	struct fbcurpos pos;	/* cursor position */
+	struct fbcurpos hot;	/* cursor hot spot */
+	struct fbcmap32 cmap;	/* color map info */
+	struct fbcurpos size;	/* cursor bit map size */
+	u32	image;		/* cursor image bits */
+	u32	mask;		/* cursor mask bits */
+};
+
+#define FBIOSCURSOR32	_IOW('F', 24, struct fbcursor32)
+#define FBIOGCURSOR32	_IOW('F', 25, struct fbcursor32)
+#endif
+
+#endif /* __LINUX_FBIO_H */
diff --git a/arch/sparc/include/asm/fcntl.h b/arch/sparc/include/asm/fcntl.h
new file mode 100644
index 000000000000..d4d9c9d852c3
--- /dev/null
+++ b/arch/sparc/include/asm/fcntl.h
@@ -0,0 +1,40 @@
+#ifndef _SPARC_FCNTL_H
+#define _SPARC_FCNTL_H
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_APPEND	0x0008
+#define FASYNC		0x0040	/* fcntl, for BSD compatibility */
+#define O_CREAT		0x0200	/* not fcntl */
+#define O_TRUNC		0x0400	/* not fcntl */
+#define O_EXCL		0x0800	/* not fcntl */
+#define O_SYNC		0x2000
+#define O_NONBLOCK	0x4000
+#if defined(__sparc__) && defined(__arch64__)
+#define O_NDELAY	0x0004
+#else
+#define O_NDELAY	(0x0004 | O_NONBLOCK)
+#endif
+#define O_NOCTTY	0x8000	/* not fcntl */
+#define O_LARGEFILE	0x40000
+#define O_DIRECT        0x100000 /* direct disk access hint */
+#define O_NOATIME	0x200000
+#define O_CLOEXEC	0x400000
+
+#define F_GETOWN	5	/*  for sockets. */
+#define F_SETOWN	6	/*  for sockets. */
+#define F_GETLK		7
+#define F_SETLK		8
+#define F_SETLKW	9
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		1
+#define F_WRLCK		2
+#define F_UNLCK		3
+
+#define __ARCH_FLOCK_PAD	short __unused;
+#define __ARCH_FLOCK64_PAD	short __unused;
+
+#include <asm-generic/fcntl.h>
+
+#endif
diff --git a/arch/sparc/include/asm/fhc.h b/arch/sparc/include/asm/fhc.h
new file mode 100644
index 000000000000..788cbc46a116
--- /dev/null
+++ b/arch/sparc/include/asm/fhc.h
@@ -0,0 +1,121 @@
+/*
+ * fhc.h: Structures for central/fhc pseudo driver on Sunfire/Starfire/Wildfire.
+ *
+ * Copyright (C) 1997, 1999 David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _SPARC64_FHC_H
+#define _SPARC64_FHC_H
+
+#include <linux/timer.h>
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/upa.h>
+
+struct linux_fhc;
+
+/* Clock board register offsets. */
+#define CLOCK_CTRL	0x00UL	/* Main control */
+#define CLOCK_STAT1	0x10UL	/* Status one */
+#define CLOCK_STAT2	0x20UL	/* Status two */
+#define CLOCK_PWRSTAT	0x30UL	/* Power status */
+#define CLOCK_PWRPRES	0x40UL	/* Power presence */
+#define CLOCK_TEMP	0x50UL	/* Temperature */
+#define CLOCK_IRQDIAG	0x60UL	/* IRQ diagnostics */
+#define CLOCK_PWRSTAT2	0x70UL	/* Power status two */
+
+#define CLOCK_CTRL_LLED		0x04	/* Left LED, 0 == on */
+#define CLOCK_CTRL_MLED		0x02	/* Mid LED, 1 == on */
+#define CLOCK_CTRL_RLED		0x01	/* RIght LED, 1 == on */
+
+struct linux_central {
+	struct linux_fhc		*child;
+	unsigned long			cfreg;
+	unsigned long			clkregs;
+	unsigned long			clkver;
+	int				slots;
+	struct device_node		*prom_node;
+
+	struct linux_prom_ranges	central_ranges[PROMREG_MAX];
+	int				num_central_ranges;
+};
+
+/* Firehose controller register offsets */
+struct fhc_regs {
+	unsigned long			pregs;	/* FHC internal regs */
+#define FHC_PREGS_ID	0x00UL	/* FHC ID */
+#define  FHC_ID_VERS		0xf0000000 /* Version of this FHC		*/
+#define  FHC_ID_PARTID		0x0ffff000 /* Part ID code (0x0f9f == FHC)	*/
+#define  FHC_ID_MANUF		0x0000007e /* Manufacturer (0x3e == SUN's JEDEC)*/
+#define  FHC_ID_RESV		0x00000001 /* Read as one			*/
+#define FHC_PREGS_RCS	0x10UL	/* FHC Reset Control/Status Register */
+#define  FHC_RCS_POR		0x80000000 /* Last reset was a power cycle	*/
+#define  FHC_RCS_SPOR		0x40000000 /* Last reset was sw power on reset	*/
+#define  FHC_RCS_SXIR		0x20000000 /* Last reset was sw XIR reset	*/
+#define  FHC_RCS_BPOR		0x10000000 /* Last reset was due to POR button	*/
+#define  FHC_RCS_BXIR		0x08000000 /* Last reset was due to XIR button	*/
+#define  FHC_RCS_WEVENT		0x04000000 /* CPU reset was due to wakeup event	*/
+#define  FHC_RCS_CFATAL		0x02000000 /* Centerplane Fatal Error signalled	*/
+#define  FHC_RCS_FENAB		0x01000000 /* Fatal errors elicit system reset	*/
+#define FHC_PREGS_CTRL	0x20UL	/* FHC Control Register */
+#define  FHC_CONTROL_ICS	0x00100000 /* Ignore Centerplane Signals	*/
+#define  FHC_CONTROL_FRST	0x00080000 /* Fatal Error Reset Enable		*/
+#define  FHC_CONTROL_LFAT	0x00040000 /* AC/DC signalled a local error	*/
+#define  FHC_CONTROL_SLINE	0x00010000 /* Firmware Synchronization Line	*/
+#define  FHC_CONTROL_DCD	0x00008000 /* DC-->DC Converter Disable		*/
+#define  FHC_CONTROL_POFF	0x00004000 /* AC/DC Controller PLL Disable	*/
+#define  FHC_CONTROL_FOFF	0x00002000 /* FHC Controller PLL Disable	*/
+#define  FHC_CONTROL_AOFF	0x00001000 /* CPU A SRAM/SBD Low Power Mode	*/
+#define  FHC_CONTROL_BOFF	0x00000800 /* CPU B SRAM/SBD Low Power Mode	*/
+#define  FHC_CONTROL_PSOFF	0x00000400 /* Turns off this FHC's power supply	*/
+#define  FHC_CONTROL_IXIST	0x00000200 /* 0=FHC tells clock board it exists	*/
+#define  FHC_CONTROL_XMSTR	0x00000100 /* 1=Causes this FHC to be XIR master*/
+#define  FHC_CONTROL_LLED	0x00000040 /* 0=Left LED ON			*/
+#define  FHC_CONTROL_MLED	0x00000020 /* 1=Middle LED ON			*/
+#define  FHC_CONTROL_RLED	0x00000010 /* 1=Right LED			*/
+#define  FHC_CONTROL_BPINS	0x00000003 /* Spare Bidirectional Pins		*/
+#define FHC_PREGS_BSR	0x30UL	/* FHC Board Status Register */
+#define  FHC_BSR_DA64		0x00040000 /* Port A: 0=128bit 1=64bit data path */
+#define  FHC_BSR_DB64		0x00020000 /* Port B: 0=128bit 1=64bit data path */
+#define  FHC_BSR_BID		0x0001e000 /* Board ID                           */
+#define  FHC_BSR_SA		0x00001c00 /* Port A UPA Speed (from the pins)   */
+#define  FHC_BSR_SB		0x00000380 /* Port B UPA Speed (from the pins)   */
+#define  FHC_BSR_NDIAG		0x00000040 /* Not in Diag Mode                   */
+#define  FHC_BSR_NTBED		0x00000020 /* Not in TestBED Mode                */
+#define  FHC_BSR_NIA		0x0000001c /* Jumper, bit 18 in PROM space       */
+#define  FHC_BSR_SI		0x00000001 /* Spare input pin value              */
+#define FHC_PREGS_ECC	0x40UL	/* FHC ECC Control Register (16 bits) */
+#define FHC_PREGS_JCTRL	0xf0UL	/* FHC JTAG Control Register */
+#define  FHC_JTAG_CTRL_MENAB	0x80000000 /* Indicates this is JTAG Master	 */
+#define  FHC_JTAG_CTRL_MNONE	0x40000000 /* Indicates no JTAG Master present	 */
+#define FHC_PREGS_JCMD	0x100UL	/* FHC JTAG Command Register */
+	unsigned long			ireg;	/* FHC IGN reg */
+#define FHC_IREG_IGN	0x00UL	/* This FHC's IGN */
+	unsigned long			ffregs;	/* FHC fanfail regs */
+#define FHC_FFREGS_IMAP	0x00UL	/* FHC Fanfail IMAP */
+#define FHC_FFREGS_ICLR	0x10UL	/* FHC Fanfail ICLR */
+	unsigned long			sregs;	/* FHC system regs */
+#define FHC_SREGS_IMAP	0x00UL	/* FHC System IMAP */
+#define FHC_SREGS_ICLR	0x10UL	/* FHC System ICLR */
+	unsigned long			uregs;	/* FHC uart regs */
+#define FHC_UREGS_IMAP	0x00UL	/* FHC Uart IMAP */
+#define FHC_UREGS_ICLR	0x10UL	/* FHC Uart ICLR */
+	unsigned long			tregs;	/* FHC TOD regs */
+#define FHC_TREGS_IMAP	0x00UL	/* FHC TOD IMAP */
+#define FHC_TREGS_ICLR	0x10UL	/* FHC TOD ICLR */
+};
+
+struct linux_fhc {
+	struct linux_fhc		*next;
+	struct linux_central		*parent;	/* NULL if not central FHC */
+	struct fhc_regs			fhc_regs;
+	int				board;
+	int				jtag_master;
+	struct device_node		*prom_node;
+
+	struct linux_prom_ranges	fhc_ranges[PROMREG_MAX];
+	int				num_fhc_ranges;
+};
+
+#endif /* !(_SPARC64_FHC_H) */
diff --git a/arch/sparc/include/asm/fixmap.h b/arch/sparc/include/asm/fixmap.h
new file mode 100644
index 000000000000..f18fc0755adf
--- /dev/null
+++ b/arch/sparc/include/asm/fixmap.h
@@ -0,0 +1,110 @@
+/*
+ * fixmap.h: compile-time virtual memory allocation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998 Ingo Molnar
+ *
+ * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
+ */
+
+#ifndef _ASM_FIXMAP_H
+#define _ASM_FIXMAP_H
+
+#include <linux/kernel.h>
+#include <asm/page.h>
+#ifdef CONFIG_HIGHMEM
+#include <linux/threads.h>
+#include <asm/kmap_types.h>
+#endif
+
+/*
+ * Here we define all the compile-time 'special' virtual
+ * addresses. The point is to have a constant address at
+ * compile time, but to set the physical address only
+ * in the boot process. We allocate these special  addresses
+ * from the top of unused virtual memory (0xfd000000 - 1 page) backwards.
+ * Also this lets us do fail-safe vmalloc(), we
+ * can guarantee that these special addresses and
+ * vmalloc()-ed addresses never overlap.
+ *
+ * these 'compile-time allocated' memory buffers are
+ * fixed-size 4k pages. (or larger if used with an increment
+ * highger than 1) use fixmap_set(idx,phys) to associate
+ * physical memory with fixmap indices.
+ *
+ * TLB entries of such buffers will not be flushed across
+ * task switches.
+ */
+
+/*
+ * on UP currently we will have no trace of the fixmap mechanism,
+ * no page table allocations, etc. This might change in the
+ * future, say framebuffers for the console driver(s) could be
+ * fix-mapped?
+ */
+enum fixed_addresses {
+	FIX_HOLE,
+#ifdef CONFIG_HIGHMEM
+	FIX_KMAP_BEGIN,
+	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+#endif
+	__end_of_fixed_addresses
+};
+
+extern void __set_fixmap (enum fixed_addresses idx,
+					unsigned long phys, pgprot_t flags);
+
+#define set_fixmap(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL)
+/*
+ * Some hardware wants to get fixmapped without caching.
+ */
+#define set_fixmap_nocache(idx, phys) \
+		__set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE)
+/*
+ * used by vmalloc.c.
+ *
+ * Leave one empty page between IO pages at 0xfd000000 and
+ * the start of the fixmap.
+ */
+#define FIXADDR_TOP	(0xfcfff000UL)
+#define FIXADDR_SIZE	((__end_of_fixed_addresses) << PAGE_SHIFT)
+#define FIXADDR_START	(FIXADDR_TOP - FIXADDR_SIZE)
+
+#define __fix_to_virt(x)	(FIXADDR_TOP - ((x) << PAGE_SHIFT))
+#define __virt_to_fix(x)	((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT)
+
+extern void __this_fixmap_does_not_exist(void);
+
+/*
+ * 'index to address' translation. If anyone tries to use the idx
+ * directly without tranlation, we catch the bug with a NULL-deference
+ * kernel oops. Illegal ranges of incoming indices are caught too.
+ */
+static inline unsigned long fix_to_virt(const unsigned int idx)
+{
+	/*
+	 * this branch gets completely eliminated after inlining,
+	 * except when someone tries to use fixaddr indices in an
+	 * illegal way. (such as mixing up address types or using
+	 * out-of-range indices).
+	 *
+	 * If it doesn't get removed, the linker will complain
+	 * loudly with a reasonably clear error message..
+	 */
+	if (idx >= __end_of_fixed_addresses)
+		__this_fixmap_does_not_exist();
+
+        return __fix_to_virt(idx);
+}
+
+static inline unsigned long virt_to_fix(const unsigned long vaddr)
+{
+	BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START);
+	return __virt_to_fix(vaddr);
+}
+
+#endif
diff --git a/arch/sparc/include/asm/floppy.h b/arch/sparc/include/asm/floppy.h
new file mode 100644
index 000000000000..faebd335b600
--- /dev/null
+++ b/arch/sparc/include/asm/floppy.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_FLOPPY_H
+#define ___ASM_SPARC_FLOPPY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/floppy_64.h>
+#else
+#include <asm/floppy_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/floppy_32.h b/arch/sparc/include/asm/floppy_32.h
new file mode 100644
index 000000000000..ae3f00bf22ff
--- /dev/null
+++ b/arch/sparc/include/asm/floppy_32.h
@@ -0,0 +1,388 @@
+/* asm/floppy.h: Sparc specific parts of the Floppy driver.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef __ASM_SPARC_FLOPPY_H
+#define __ASM_SPARC_FLOPPY_H
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/idprom.h>
+#include <asm/machines.h>
+#include <asm/oplib.h>
+#include <asm/auxio.h>
+#include <asm/irq.h>
+
+/* We don't need no stinkin' I/O port allocation crap. */
+#undef release_region
+#undef request_region
+#define release_region(X, Y)	do { } while(0)
+#define request_region(X, Y, Z)	(1)
+
+/* References:
+ * 1) Netbsd Sun floppy driver.
+ * 2) NCR 82077 controller manual
+ * 3) Intel 82077 controller manual
+ */
+struct sun_flpy_controller {
+	volatile unsigned char status_82072;  /* Main Status reg. */
+#define dcr_82072              status_82072   /* Digital Control reg. */
+#define status1_82077          status_82072   /* Auxiliary Status reg. 1 */
+
+	volatile unsigned char data_82072;    /* Data fifo. */
+#define status2_82077          data_82072     /* Auxiliary Status reg. 2 */
+
+	volatile unsigned char dor_82077;     /* Digital Output reg. */
+	volatile unsigned char tapectl_82077; /* What the? Tape control reg? */
+
+	volatile unsigned char status_82077;  /* Main Status Register. */
+#define drs_82077              status_82077   /* Digital Rate Select reg. */
+
+	volatile unsigned char data_82077;    /* Data fifo. */
+	volatile unsigned char ___unused;
+	volatile unsigned char dir_82077;     /* Digital Input reg. */
+#define dcr_82077              dir_82077      /* Config Control reg. */
+};
+
+/* You'll only ever find one controller on a SparcStation anyways. */
+static struct sun_flpy_controller *sun_fdc = NULL;
+extern volatile unsigned char *fdc_status;
+
+struct sun_floppy_ops {
+	unsigned char (*fd_inb)(int port);
+	void (*fd_outb)(unsigned char value, int port);
+};
+
+static struct sun_floppy_ops sun_fdops;
+
+#define fd_inb(port)              sun_fdops.fd_inb(port)
+#define fd_outb(value,port)       sun_fdops.fd_outb(value,port)
+#define fd_enable_dma()           sun_fd_enable_dma()
+#define fd_disable_dma()          sun_fd_disable_dma()
+#define fd_request_dma()          (0) /* nothing... */
+#define fd_free_dma()             /* nothing... */
+#define fd_clear_dma_ff()         /* nothing... */
+#define fd_set_dma_mode(mode)     sun_fd_set_dma_mode(mode)
+#define fd_set_dma_addr(addr)     sun_fd_set_dma_addr(addr)
+#define fd_set_dma_count(count)   sun_fd_set_dma_count(count)
+#define fd_enable_irq()           /* nothing... */
+#define fd_disable_irq()          /* nothing... */
+#define fd_cacheflush(addr, size) /* nothing... */
+#define fd_request_irq()          sun_fd_request_irq()
+#define fd_free_irq()             /* nothing... */
+#if 0  /* P3: added by Alain, these cause a MMU corruption. 19960524 XXX */
+#define fd_dma_mem_alloc(size)    ((unsigned long) vmalloc(size))
+#define fd_dma_mem_free(addr,size) (vfree((void *)(addr)))
+#endif
+
+/* XXX This isn't really correct. XXX */
+#define get_dma_residue(x)        (0)
+
+#define FLOPPY0_TYPE  4
+#define FLOPPY1_TYPE  0
+
+/* Super paranoid... */
+#undef HAVE_DISABLE_HLT
+
+/* Here is where we catch the floppy driver trying to initialize,
+ * therefore this is where we call the PROM device tree probing
+ * routine etc. on the Sparc.
+ */
+#define FDC1                      sun_floppy_init()
+
+#define N_FDC    1
+#define N_DRIVE  8
+
+/* No 64k boundary crossing problems on the Sparc. */
+#define CROSS_64KB(a,s) (0)
+
+/* Routines unique to each controller type on a Sun. */
+static void sun_set_dor(unsigned char value, int fdc_82077)
+{
+	if (sparc_cpu_model == sun4c) {
+		unsigned int bits = 0;
+		if (value & 0x10)
+			bits |= AUXIO_FLPY_DSEL;
+		if ((value & 0x80) == 0)
+			bits |= AUXIO_FLPY_EJCT;
+		set_auxio(bits, (~bits) & (AUXIO_FLPY_DSEL|AUXIO_FLPY_EJCT));
+	}
+	if (fdc_82077) {
+		sun_fdc->dor_82077 = value;
+	}
+}
+
+static unsigned char sun_read_dir(void)
+{
+	if (sparc_cpu_model == sun4c)
+		return (get_auxio() & AUXIO_FLPY_DCHG) ? 0x80 : 0;
+	else
+		return sun_fdc->dir_82077;
+}
+
+static unsigned char sun_82072_fd_inb(int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to read unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 4: /* FD_STATUS */
+		return sun_fdc->status_82072 & ~STATUS_DMA;
+	case 5: /* FD_DATA */
+		return sun_fdc->data_82072;
+	case 7: /* FD_DIR */
+		return sun_read_dir();
+	};
+	panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82072_fd_outb(unsigned char value, int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to write to unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 2: /* FD_DOR */
+		sun_set_dor(value, 0);
+		break;
+	case 5: /* FD_DATA */
+		sun_fdc->data_82072 = value;
+		break;
+	case 7: /* FD_DCR */
+		sun_fdc->dcr_82072 = value;
+		break;
+	case 4: /* FD_STATUS */
+		sun_fdc->status_82072 = value;
+		break;
+	};
+	return;
+}
+
+static unsigned char sun_82077_fd_inb(int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to read unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 0: /* FD_STATUS_0 */
+		return sun_fdc->status1_82077;
+	case 1: /* FD_STATUS_1 */
+		return sun_fdc->status2_82077;
+	case 2: /* FD_DOR */
+		return sun_fdc->dor_82077;
+	case 3: /* FD_TDR */
+		return sun_fdc->tapectl_82077;
+	case 4: /* FD_STATUS */
+		return sun_fdc->status_82077 & ~STATUS_DMA;
+	case 5: /* FD_DATA */
+		return sun_fdc->data_82077;
+	case 7: /* FD_DIR */
+		return sun_read_dir();
+	};
+	panic("sun_82077_fd_inb: How did I get here?");
+}
+
+static void sun_82077_fd_outb(unsigned char value, int port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to write to unknown port %d\n", port);
+		panic("floppy: Port bolixed.");
+	case 2: /* FD_DOR */
+		sun_set_dor(value, 1);
+		break;
+	case 5: /* FD_DATA */
+		sun_fdc->data_82077 = value;
+		break;
+	case 7: /* FD_DCR */
+		sun_fdc->dcr_82077 = value;
+		break;
+	case 4: /* FD_STATUS */
+		sun_fdc->status_82077 = value;
+		break;
+	case 3: /* FD_TDR */
+		sun_fdc->tapectl_82077 = value;
+		break;
+	};
+	return;
+}
+
+/* For pseudo-dma (Sun floppy drives have no real DMA available to
+ * them so we must eat the data fifo bytes directly ourselves) we have
+ * three state variables.  doing_pdma tells our inline low-level
+ * assembly floppy interrupt entry point whether it should sit and eat
+ * bytes from the fifo or just transfer control up to the higher level
+ * floppy interrupt c-code.  I tried very hard but I could not get the
+ * pseudo-dma to work in c-code without getting many overruns and
+ * underruns.  If non-zero, doing_pdma encodes the direction of
+ * the transfer for debugging.  1=read 2=write
+ */
+extern char *pdma_vaddr;
+extern unsigned long pdma_size;
+extern volatile int doing_pdma;
+
+/* This is software state */
+extern char *pdma_base;
+extern unsigned long pdma_areasize;
+
+/* Common routines to all controller types on the Sparc. */
+static inline void virtual_dma_init(void)
+{
+	/* nothing... */
+}
+
+static inline void sun_fd_disable_dma(void)
+{
+	doing_pdma = 0;
+	if (pdma_base) {
+		mmu_unlockarea(pdma_base, pdma_areasize);
+		pdma_base = NULL;
+	}
+}
+
+static inline void sun_fd_set_dma_mode(int mode)
+{
+	switch(mode) {
+	case DMA_MODE_READ:
+		doing_pdma = 1;
+		break;
+	case DMA_MODE_WRITE:
+		doing_pdma = 2;
+		break;
+	default:
+		printk("Unknown dma mode %d\n", mode);
+		panic("floppy: Giving up...");
+	}
+}
+
+static inline void sun_fd_set_dma_addr(char *buffer)
+{
+	pdma_vaddr = buffer;
+}
+
+static inline void sun_fd_set_dma_count(int length)
+{
+	pdma_size = length;
+}
+
+static inline void sun_fd_enable_dma(void)
+{
+	pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
+	pdma_base = pdma_vaddr;
+	pdma_areasize = pdma_size;
+}
+
+/* Our low-level entry point in arch/sparc/kernel/entry.S */
+extern int sparc_floppy_request_irq(int irq, unsigned long flags,
+				    irq_handler_t irq_handler);
+
+static int sun_fd_request_irq(void)
+{
+	static int once = 0;
+	int error;
+
+	if(!once) {
+		once = 1;
+		error = sparc_floppy_request_irq(FLOPPY_IRQ,
+						 IRQF_DISABLED,
+						 floppy_interrupt);
+		return ((error == 0) ? 0 : -1);
+	} else return 0;
+}
+
+static struct linux_prom_registers fd_regs[2];
+
+static int sun_floppy_init(void)
+{
+	char state[128];
+	int tnode, fd_node, num_regs;
+	struct resource r;
+
+	use_virtual_dma = 1;
+
+	FLOPPY_IRQ = 11;
+	/* Forget it if we aren't on a machine that could possibly
+	 * ever have a floppy drive.
+	 */
+	if((sparc_cpu_model != sun4c && sparc_cpu_model != sun4m) ||
+	   ((idprom->id_machtype == (SM_SUN4C | SM_4C_SLC)) ||
+	    (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC)))) {
+		/* We certainly don't have a floppy controller. */
+		goto no_sun_fdc;
+	}
+	/* Well, try to find one. */
+	tnode = prom_getchild(prom_root_node);
+	fd_node = prom_searchsiblings(tnode, "obio");
+	if(fd_node != 0) {
+		tnode = prom_getchild(fd_node);
+		fd_node = prom_searchsiblings(tnode, "SUNW,fdtwo");
+	} else {
+		fd_node = prom_searchsiblings(tnode, "fd");
+	}
+	if(fd_node == 0) {
+		goto no_sun_fdc;
+	}
+
+	/* The sun4m lets us know if the controller is actually usable. */
+	if(sparc_cpu_model == sun4m &&
+	   prom_getproperty(fd_node, "status", state, sizeof(state)) != -1) {
+		if(!strcmp(state, "disabled")) {
+			goto no_sun_fdc;
+		}
+	}
+	num_regs = prom_getproperty(fd_node, "reg", (char *) fd_regs, sizeof(fd_regs));
+	num_regs = (num_regs / sizeof(fd_regs[0]));
+	prom_apply_obio_ranges(fd_regs, num_regs);
+	memset(&r, 0, sizeof(r));
+	r.flags = fd_regs[0].which_io;
+	r.start = fd_regs[0].phys_addr;
+	sun_fdc = (struct sun_flpy_controller *)
+	    sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy");
+
+	/* Last minute sanity check... */
+	if(sun_fdc->status_82072 == 0xff) {
+		sun_fdc = NULL;
+		goto no_sun_fdc;
+	}
+
+	sun_fdops.fd_inb = sun_82077_fd_inb;
+	sun_fdops.fd_outb = sun_82077_fd_outb;
+	fdc_status = &sun_fdc->status_82077;
+
+	if (sun_fdc->dor_82077 == 0x80) {
+		sun_fdc->dor_82077 = 0x02;
+		if (sun_fdc->dor_82077 == 0x80) {
+			sun_fdops.fd_inb = sun_82072_fd_inb;
+			sun_fdops.fd_outb = sun_82072_fd_outb;
+			fdc_status = &sun_fdc->status_82072;
+		}
+	}
+
+	/* Success... */
+	allowed_drive_mask = 0x01;
+	return (int) sun_fdc;
+
+no_sun_fdc:
+	return -1;
+}
+
+static int sparc_eject(void)
+{
+	set_dor(0x00, 0xff, 0x90);
+	udelay(500);
+	set_dor(0x00, 0x6f, 0x00);
+	udelay(500);
+	return 0;
+}
+
+#define fd_eject(drive) sparc_eject()
+
+#define EXTRA_FLOPPY_PARAMS
+
+#endif /* !(__ASM_SPARC_FLOPPY_H) */
diff --git a/arch/sparc/include/asm/floppy_64.h b/arch/sparc/include/asm/floppy_64.h
new file mode 100644
index 000000000000..c39db1060bc7
--- /dev/null
+++ b/arch/sparc/include/asm/floppy_64.h
@@ -0,0 +1,782 @@
+/* floppy.h: Sparc specific parts of the Floppy driver.
+ *
+ * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ *
+ * Ultra/PCI support added: Sep 1997  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef __ASM_SPARC64_FLOPPY_H
+#define __ASM_SPARC64_FLOPPY_H
+
+#include <linux/init.h>
+#include <linux/pci.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/idprom.h>
+#include <asm/oplib.h>
+#include <asm/auxio.h>
+#include <asm/sbus.h>
+#include <asm/irq.h>
+
+
+/*
+ * Define this to enable exchanging drive 0 and 1 if only drive 1 is
+ * probed on PCI machines.
+ */
+#undef PCI_FDC_SWAP_DRIVES
+
+
+/* References:
+ * 1) Netbsd Sun floppy driver.
+ * 2) NCR 82077 controller manual
+ * 3) Intel 82077 controller manual
+ */
+struct sun_flpy_controller {
+	volatile unsigned char status1_82077; /* Auxiliary Status reg. 1 */
+	volatile unsigned char status2_82077; /* Auxiliary Status reg. 2 */
+	volatile unsigned char dor_82077;     /* Digital Output reg. */
+	volatile unsigned char tapectl_82077; /* Tape Control reg */
+	volatile unsigned char status_82077;  /* Main Status Register. */
+#define drs_82077              status_82077   /* Digital Rate Select reg. */
+	volatile unsigned char data_82077;    /* Data fifo. */
+	volatile unsigned char ___unused;
+	volatile unsigned char dir_82077;     /* Digital Input reg. */
+#define dcr_82077              dir_82077      /* Config Control reg. */
+};
+
+/* You'll only ever find one controller on an Ultra anyways. */
+static struct sun_flpy_controller *sun_fdc = (struct sun_flpy_controller *)-1;
+unsigned long fdc_status;
+static struct sbus_dev *floppy_sdev = NULL;
+
+struct sun_floppy_ops {
+	unsigned char	(*fd_inb) (unsigned long port);
+	void		(*fd_outb) (unsigned char value, unsigned long port);
+	void		(*fd_enable_dma) (void);
+	void		(*fd_disable_dma) (void);
+	void		(*fd_set_dma_mode) (int);
+	void		(*fd_set_dma_addr) (char *);
+	void		(*fd_set_dma_count) (int);
+	unsigned int	(*get_dma_residue) (void);
+	int		(*fd_request_irq) (void);
+	void		(*fd_free_irq) (void);
+	int		(*fd_eject) (int);
+};
+
+static struct sun_floppy_ops sun_fdops;
+
+#define fd_inb(port)              sun_fdops.fd_inb(port)
+#define fd_outb(value,port)       sun_fdops.fd_outb(value,port)
+#define fd_enable_dma()           sun_fdops.fd_enable_dma()
+#define fd_disable_dma()          sun_fdops.fd_disable_dma()
+#define fd_request_dma()          (0) /* nothing... */
+#define fd_free_dma()             /* nothing... */
+#define fd_clear_dma_ff()         /* nothing... */
+#define fd_set_dma_mode(mode)     sun_fdops.fd_set_dma_mode(mode)
+#define fd_set_dma_addr(addr)     sun_fdops.fd_set_dma_addr(addr)
+#define fd_set_dma_count(count)   sun_fdops.fd_set_dma_count(count)
+#define get_dma_residue(x)        sun_fdops.get_dma_residue()
+#define fd_cacheflush(addr, size) /* nothing... */
+#define fd_request_irq()          sun_fdops.fd_request_irq()
+#define fd_free_irq()             sun_fdops.fd_free_irq()
+#define fd_eject(drive)           sun_fdops.fd_eject(drive)
+
+/* Super paranoid... */
+#undef HAVE_DISABLE_HLT
+
+static int sun_floppy_types[2] = { 0, 0 };
+
+/* Here is where we catch the floppy driver trying to initialize,
+ * therefore this is where we call the PROM device tree probing
+ * routine etc. on the Sparc.
+ */
+#define FLOPPY0_TYPE		sun_floppy_init()
+#define FLOPPY1_TYPE		sun_floppy_types[1]
+
+#define FDC1			((unsigned long)sun_fdc)
+
+#define N_FDC    1
+#define N_DRIVE  8
+
+/* No 64k boundary crossing problems on the Sparc. */
+#define CROSS_64KB(a,s) (0)
+
+static unsigned char sun_82077_fd_inb(unsigned long port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to read unknown port %lx\n", port);
+		panic("floppy: Port bolixed.");
+	case 4: /* FD_STATUS */
+		return sbus_readb(&sun_fdc->status_82077) & ~STATUS_DMA;
+	case 5: /* FD_DATA */
+		return sbus_readb(&sun_fdc->data_82077);
+	case 7: /* FD_DIR */
+		/* XXX: Is DCL on 0x80 in sun4m? */
+		return sbus_readb(&sun_fdc->dir_82077);
+	};
+	panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun_82077_fd_outb(unsigned char value, unsigned long port)
+{
+	udelay(5);
+	switch(port & 7) {
+	default:
+		printk("floppy: Asked to write to unknown port %lx\n", port);
+		panic("floppy: Port bolixed.");
+	case 2: /* FD_DOR */
+		/* Happily, the 82077 has a real DOR register. */
+		sbus_writeb(value, &sun_fdc->dor_82077);
+		break;
+	case 5: /* FD_DATA */
+		sbus_writeb(value, &sun_fdc->data_82077);
+		break;
+	case 7: /* FD_DCR */
+		sbus_writeb(value, &sun_fdc->dcr_82077);
+		break;
+	case 4: /* FD_STATUS */
+		sbus_writeb(value, &sun_fdc->status_82077);
+		break;
+	};
+	return;
+}
+
+/* For pseudo-dma (Sun floppy drives have no real DMA available to
+ * them so we must eat the data fifo bytes directly ourselves) we have
+ * three state variables.  doing_pdma tells our inline low-level
+ * assembly floppy interrupt entry point whether it should sit and eat
+ * bytes from the fifo or just transfer control up to the higher level
+ * floppy interrupt c-code.  I tried very hard but I could not get the
+ * pseudo-dma to work in c-code without getting many overruns and
+ * underruns.  If non-zero, doing_pdma encodes the direction of
+ * the transfer for debugging.  1=read 2=write
+ */
+unsigned char *pdma_vaddr;
+unsigned long pdma_size;
+volatile int doing_pdma = 0;
+
+/* This is software state */
+char *pdma_base = NULL;
+unsigned long pdma_areasize;
+
+/* Common routines to all controller types on the Sparc. */
+static void sun_fd_disable_dma(void)
+{
+	doing_pdma = 0;
+	if (pdma_base) {
+		mmu_unlockarea(pdma_base, pdma_areasize);
+		pdma_base = NULL;
+	}
+}
+
+static void sun_fd_set_dma_mode(int mode)
+{
+	switch(mode) {
+	case DMA_MODE_READ:
+		doing_pdma = 1;
+		break;
+	case DMA_MODE_WRITE:
+		doing_pdma = 2;
+		break;
+	default:
+		printk("Unknown dma mode %d\n", mode);
+		panic("floppy: Giving up...");
+	}
+}
+
+static void sun_fd_set_dma_addr(char *buffer)
+{
+	pdma_vaddr = buffer;
+}
+
+static void sun_fd_set_dma_count(int length)
+{
+	pdma_size = length;
+}
+
+static void sun_fd_enable_dma(void)
+{
+	pdma_vaddr = mmu_lockarea(pdma_vaddr, pdma_size);
+	pdma_base = pdma_vaddr;
+	pdma_areasize = pdma_size;
+}
+
+irqreturn_t sparc_floppy_irq(int irq, void *dev_cookie)
+{
+	if (likely(doing_pdma)) {
+		void __iomem *stat = (void __iomem *) fdc_status;
+		unsigned char *vaddr = pdma_vaddr;
+		unsigned long size = pdma_size;
+		u8 val;
+
+		while (size) {
+			val = readb(stat);
+			if (unlikely(!(val & 0x80))) {
+				pdma_vaddr = vaddr;
+				pdma_size = size;
+				return IRQ_HANDLED;
+			}
+			if (unlikely(!(val & 0x20))) {
+				pdma_vaddr = vaddr;
+				pdma_size = size;
+				doing_pdma = 0;
+				goto main_interrupt;
+			}
+			if (val & 0x40) {
+				/* read */
+				*vaddr++ = readb(stat + 1);
+			} else {
+				unsigned char data = *vaddr++;
+
+				/* write */
+				writeb(data, stat + 1);
+			}
+			size--;
+		}
+
+		pdma_vaddr = vaddr;
+		pdma_size = size;
+
+		/* Send Terminal Count pulse to floppy controller. */
+		val = readb(auxio_register);
+		val |= AUXIO_AUX1_FTCNT;
+		writeb(val, auxio_register);
+		val &= ~AUXIO_AUX1_FTCNT;
+		writeb(val, auxio_register);
+
+		doing_pdma = 0;
+	}
+
+main_interrupt:
+	return floppy_interrupt(irq, dev_cookie);
+}
+
+static int sun_fd_request_irq(void)
+{
+	static int once = 0;
+	int error;
+
+	if(!once) {
+		once = 1;
+
+		error = request_irq(FLOPPY_IRQ, sparc_floppy_irq,
+				    IRQF_DISABLED, "floppy", NULL);
+
+		return ((error == 0) ? 0 : -1);
+	}
+	return 0;
+}
+
+static void sun_fd_free_irq(void)
+{
+}
+
+static unsigned int sun_get_dma_residue(void)
+{
+	/* XXX This isn't really correct. XXX */
+	return 0;
+}
+
+static int sun_fd_eject(int drive)
+{
+	set_dor(0x00, 0xff, 0x90);
+	udelay(500);
+	set_dor(0x00, 0x6f, 0x00);
+	udelay(500);
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+#include <asm/ebus.h>
+#include <asm/ns87303.h>
+
+static struct ebus_dma_info sun_pci_fd_ebus_dma;
+static struct pci_dev *sun_pci_ebus_dev;
+static int sun_pci_broken_drive = -1;
+
+struct sun_pci_dma_op {
+	unsigned int 	addr;
+	int		len;
+	int		direction;
+	char		*buf;
+};
+static struct sun_pci_dma_op sun_pci_dma_current = { -1U, 0, 0, NULL};
+static struct sun_pci_dma_op sun_pci_dma_pending = { -1U, 0, 0, NULL};
+
+extern irqreturn_t floppy_interrupt(int irq, void *dev_id);
+
+static unsigned char sun_pci_fd_inb(unsigned long port)
+{
+	udelay(5);
+	return inb(port);
+}
+
+static void sun_pci_fd_outb(unsigned char val, unsigned long port)
+{
+	udelay(5);
+	outb(val, port);
+}
+
+static void sun_pci_fd_broken_outb(unsigned char val, unsigned long port)
+{
+	udelay(5);
+	/*
+	 * XXX: Due to SUN's broken floppy connector on AX and AXi
+	 *      we need to turn on MOTOR_0 also, if the floppy is
+	 *      jumpered to DS1 (like most PC floppies are). I hope
+	 *      this does not hurt correct hardware like the AXmp.
+	 *      (Eddie, Sep 12 1998).
+	 */
+	if (port == ((unsigned long)sun_fdc) + 2) {
+		if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x20)) {
+			val |= 0x10;
+		}
+	}
+	outb(val, port);
+}
+
+#ifdef PCI_FDC_SWAP_DRIVES
+static void sun_pci_fd_lde_broken_outb(unsigned char val, unsigned long port)
+{
+	udelay(5);
+	/*
+	 * XXX: Due to SUN's broken floppy connector on AX and AXi
+	 *      we need to turn on MOTOR_0 also, if the floppy is
+	 *      jumpered to DS1 (like most PC floppies are). I hope
+	 *      this does not hurt correct hardware like the AXmp.
+	 *      (Eddie, Sep 12 1998).
+	 */
+	if (port == ((unsigned long)sun_fdc) + 2) {
+		if (((val & 0x03) == sun_pci_broken_drive) && (val & 0x10)) {
+			val &= ~(0x03);
+			val |= 0x21;
+		}
+	}
+	outb(val, port);
+}
+#endif /* PCI_FDC_SWAP_DRIVES */
+
+static void sun_pci_fd_enable_dma(void)
+{
+	BUG_ON((NULL == sun_pci_dma_pending.buf) 	||
+	    (0	  == sun_pci_dma_pending.len) 	||
+	    (0	  == sun_pci_dma_pending.direction));
+
+	sun_pci_dma_current.buf = sun_pci_dma_pending.buf;
+	sun_pci_dma_current.len = sun_pci_dma_pending.len;
+	sun_pci_dma_current.direction = sun_pci_dma_pending.direction;
+
+	sun_pci_dma_pending.buf  = NULL;
+	sun_pci_dma_pending.len  = 0;
+	sun_pci_dma_pending.direction = 0;
+	sun_pci_dma_pending.addr = -1U;
+
+	sun_pci_dma_current.addr =
+		pci_map_single(sun_pci_ebus_dev,
+			       sun_pci_dma_current.buf,
+			       sun_pci_dma_current.len,
+			       sun_pci_dma_current.direction);
+
+	ebus_dma_enable(&sun_pci_fd_ebus_dma, 1);
+
+	if (ebus_dma_request(&sun_pci_fd_ebus_dma,
+			     sun_pci_dma_current.addr,
+			     sun_pci_dma_current.len))
+		BUG();
+}
+
+static void sun_pci_fd_disable_dma(void)
+{
+	ebus_dma_enable(&sun_pci_fd_ebus_dma, 0);
+	if (sun_pci_dma_current.addr != -1U)
+		pci_unmap_single(sun_pci_ebus_dev,
+				 sun_pci_dma_current.addr,
+				 sun_pci_dma_current.len,
+				 sun_pci_dma_current.direction);
+	sun_pci_dma_current.addr = -1U;
+}
+
+static void sun_pci_fd_set_dma_mode(int mode)
+{
+	if (mode == DMA_MODE_WRITE)
+		sun_pci_dma_pending.direction = PCI_DMA_TODEVICE;
+	else
+		sun_pci_dma_pending.direction = PCI_DMA_FROMDEVICE;
+
+	ebus_dma_prepare(&sun_pci_fd_ebus_dma, mode != DMA_MODE_WRITE);
+}
+
+static void sun_pci_fd_set_dma_count(int length)
+{
+	sun_pci_dma_pending.len = length;
+}
+
+static void sun_pci_fd_set_dma_addr(char *buffer)
+{
+	sun_pci_dma_pending.buf = buffer;
+}
+
+static unsigned int sun_pci_get_dma_residue(void)
+{
+	return ebus_dma_residue(&sun_pci_fd_ebus_dma);
+}
+
+static int sun_pci_fd_request_irq(void)
+{
+	return ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 1);
+}
+
+static void sun_pci_fd_free_irq(void)
+{
+	ebus_dma_irq_enable(&sun_pci_fd_ebus_dma, 0);
+}
+
+static int sun_pci_fd_eject(int drive)
+{
+	return -EINVAL;
+}
+
+void sun_pci_fd_dma_callback(struct ebus_dma_info *p, int event, void *cookie)
+{
+	floppy_interrupt(0, NULL);
+}
+
+/*
+ * Floppy probing, we'd like to use /dev/fd0 for a single Floppy on PCI,
+ * even if this is configured using DS1, thus looks like /dev/fd1 with
+ * the cabling used in Ultras.
+ */
+#define DOR	(port + 2)
+#define MSR	(port + 4)
+#define FIFO	(port + 5)
+
+static void sun_pci_fd_out_byte(unsigned long port, unsigned char val,
+			        unsigned long reg)
+{
+	unsigned char status;
+	int timeout = 1000;
+
+	while (!((status = inb(MSR)) & 0x80) && --timeout)
+		udelay(100);
+	outb(val, reg);
+}
+
+static unsigned char sun_pci_fd_sensei(unsigned long port)
+{
+	unsigned char result[2] = { 0x70, 0x00 };
+	unsigned char status;
+	int i = 0;
+
+	sun_pci_fd_out_byte(port, 0x08, FIFO);
+	do {
+		int timeout = 1000;
+
+		while (!((status = inb(MSR)) & 0x80) && --timeout)
+			udelay(100);
+
+		if (!timeout)
+			break;
+
+		if ((status & 0xf0) == 0xd0)
+			result[i++] = inb(FIFO);
+		else
+			break;
+	} while (i < 2);
+
+	return result[0];
+}
+
+static void sun_pci_fd_reset(unsigned long port)
+{
+	unsigned char mask = 0x00;
+	unsigned char status;
+	int timeout = 10000;
+
+	outb(0x80, MSR);
+	do {
+		status = sun_pci_fd_sensei(port);
+		if ((status & 0xc0) == 0xc0)
+			mask |= 1 << (status & 0x03);
+		else
+			udelay(100);
+	} while ((mask != 0x0f) && --timeout);
+}
+
+static int sun_pci_fd_test_drive(unsigned long port, int drive)
+{
+	unsigned char status, data;
+	int timeout = 1000;
+	int ready;
+
+	sun_pci_fd_reset(port);
+
+	data = (0x10 << drive) | 0x0c | drive;
+	sun_pci_fd_out_byte(port, data, DOR);
+
+	sun_pci_fd_out_byte(port, 0x07, FIFO);
+	sun_pci_fd_out_byte(port, drive & 0x03, FIFO);
+
+	do {
+		udelay(100);
+		status = sun_pci_fd_sensei(port);
+	} while (((status & 0xc0) == 0x80) && --timeout);
+
+	if (!timeout)
+		ready = 0;
+	else
+		ready = (status & 0x10) ? 0 : 1;
+
+	sun_pci_fd_reset(port);
+	return ready;
+}
+#undef FIFO
+#undef MSR
+#undef DOR
+
+#endif /* CONFIG_PCI */
+
+#ifdef CONFIG_PCI
+static int __init ebus_fdthree_p(struct linux_ebus_device *edev)
+{
+	if (!strcmp(edev->prom_node->name, "fdthree"))
+		return 1;
+	if (!strcmp(edev->prom_node->name, "floppy")) {
+		const char *compat;
+
+		compat = of_get_property(edev->prom_node,
+					 "compatible", NULL);
+		if (compat && !strcmp(compat, "fdthree"))
+			return 1;
+	}
+	return 0;
+}
+#endif
+
+static unsigned long __init sun_floppy_init(void)
+{
+	char state[128];
+	struct sbus_bus *bus;
+	struct sbus_dev *sdev = NULL;
+	static int initialized = 0;
+
+	if (initialized)
+		return sun_floppy_types[0];
+	initialized = 1;
+
+	for_all_sbusdev (sdev, bus) {
+		if (!strcmp(sdev->prom_name, "SUNW,fdtwo"))
+			break;
+	}
+	if(sdev) {
+		floppy_sdev = sdev;
+		FLOPPY_IRQ = sdev->irqs[0];
+	} else {
+#ifdef CONFIG_PCI
+		struct linux_ebus *ebus;
+		struct linux_ebus_device *edev = NULL;
+		unsigned long config = 0;
+		void __iomem *auxio_reg;
+		const char *state_prop;
+
+		for_each_ebus(ebus) {
+			for_each_ebusdev(edev, ebus) {
+				if (ebus_fdthree_p(edev))
+					goto ebus_done;
+			}
+		}
+	ebus_done:
+		if (!edev)
+			return 0;
+
+		state_prop = of_get_property(edev->prom_node, "status", NULL);
+		if (state_prop && !strncmp(state_prop, "disabled", 8))
+			return 0;
+
+		FLOPPY_IRQ = edev->irqs[0];
+
+		/* Make sure the high density bit is set, some systems
+		 * (most notably Ultra5/Ultra10) come up with it clear.
+		 */
+		auxio_reg = (void __iomem *) edev->resource[2].start;
+		writel(readl(auxio_reg)|0x2, auxio_reg);
+
+		sun_pci_ebus_dev = ebus->self;
+
+		spin_lock_init(&sun_pci_fd_ebus_dma.lock);
+
+		/* XXX ioremap */
+		sun_pci_fd_ebus_dma.regs = (void __iomem *)
+			edev->resource[1].start;
+		if (!sun_pci_fd_ebus_dma.regs)
+			return 0;
+
+		sun_pci_fd_ebus_dma.flags = (EBUS_DMA_FLAG_USE_EBDMA_HANDLER |
+					     EBUS_DMA_FLAG_TCI_DISABLE);
+		sun_pci_fd_ebus_dma.callback = sun_pci_fd_dma_callback;
+		sun_pci_fd_ebus_dma.client_cookie = NULL;
+		sun_pci_fd_ebus_dma.irq = FLOPPY_IRQ;
+		strcpy(sun_pci_fd_ebus_dma.name, "floppy");
+		if (ebus_dma_register(&sun_pci_fd_ebus_dma))
+			return 0;
+
+		/* XXX ioremap */
+		sun_fdc = (struct sun_flpy_controller *)edev->resource[0].start;
+
+		sun_fdops.fd_inb = sun_pci_fd_inb;
+		sun_fdops.fd_outb = sun_pci_fd_outb;
+
+		can_use_virtual_dma = use_virtual_dma = 0;
+		sun_fdops.fd_enable_dma = sun_pci_fd_enable_dma;
+		sun_fdops.fd_disable_dma = sun_pci_fd_disable_dma;
+		sun_fdops.fd_set_dma_mode = sun_pci_fd_set_dma_mode;
+		sun_fdops.fd_set_dma_addr = sun_pci_fd_set_dma_addr;
+		sun_fdops.fd_set_dma_count = sun_pci_fd_set_dma_count;
+		sun_fdops.get_dma_residue = sun_pci_get_dma_residue;
+
+		sun_fdops.fd_request_irq = sun_pci_fd_request_irq;
+		sun_fdops.fd_free_irq = sun_pci_fd_free_irq;
+
+		sun_fdops.fd_eject = sun_pci_fd_eject;
+
+		fdc_status = (unsigned long) &sun_fdc->status_82077;
+
+		/*
+		 * XXX: Find out on which machines this is really needed.
+		 */
+		if (1) {
+			sun_pci_broken_drive = 1;
+			sun_fdops.fd_outb = sun_pci_fd_broken_outb;
+		}
+
+		allowed_drive_mask = 0;
+		if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 0))
+			sun_floppy_types[0] = 4;
+		if (sun_pci_fd_test_drive((unsigned long)sun_fdc, 1))
+			sun_floppy_types[1] = 4;
+
+		/*
+		 * Find NS87303 SuperIO config registers (through ecpp).
+		 */
+		for_each_ebus(ebus) {
+			for_each_ebusdev(edev, ebus) {
+				if (!strcmp(edev->prom_node->name, "ecpp")) {
+					config = edev->resource[1].start;
+					goto config_done;
+				}
+			}
+		}
+	config_done:
+
+		/*
+		 * Sanity check, is this really the NS87303?
+		 */
+		switch (config & 0x3ff) {
+		case 0x02e:
+		case 0x15c:
+		case 0x26e:
+		case 0x398:
+			break;
+		default:
+			config = 0;
+		}
+
+		if (!config)
+			return sun_floppy_types[0];
+
+		/* Enable PC-AT mode. */
+		ns87303_modify(config, ASC, 0, 0xc0);
+
+#ifdef PCI_FDC_SWAP_DRIVES
+		/*
+		 * If only Floppy 1 is present, swap drives.
+		 */
+		if (!sun_floppy_types[0] && sun_floppy_types[1]) {
+			/*
+			 * Set the drive exchange bit in FCR on NS87303,
+			 * make sure other bits are sane before doing so.
+			 */
+			ns87303_modify(config, FER, FER_EDM, 0);
+			ns87303_modify(config, ASC, ASC_DRV2_SEL, 0);
+			ns87303_modify(config, FCR, 0, FCR_LDE);
+
+			config = sun_floppy_types[0];
+			sun_floppy_types[0] = sun_floppy_types[1];
+			sun_floppy_types[1] = config;
+
+			if (sun_pci_broken_drive != -1) {
+				sun_pci_broken_drive = 1 - sun_pci_broken_drive;
+				sun_fdops.fd_outb = sun_pci_fd_lde_broken_outb;
+			}
+		}
+#endif /* PCI_FDC_SWAP_DRIVES */
+
+		return sun_floppy_types[0];
+#else
+		return 0;
+#endif
+	}
+	prom_getproperty(sdev->prom_node, "status", state, sizeof(state));
+	if(!strncmp(state, "disabled", 8))
+		return 0;
+
+	/*
+	 * We cannot do sbus_ioremap here: it does request_region,
+	 * which the generic floppy driver tries to do once again.
+	 * But we must use the sdev resource values as they have
+	 * had parent ranges applied.
+	 */
+	sun_fdc = (struct sun_flpy_controller *)
+		(sdev->resource[0].start +
+		 ((sdev->resource[0].flags & 0x1ffUL) << 32UL));
+
+	/* Last minute sanity check... */
+	if(sbus_readb(&sun_fdc->status1_82077) == 0xff) {
+		sun_fdc = (struct sun_flpy_controller *)-1;
+		return 0;
+	}
+
+        sun_fdops.fd_inb = sun_82077_fd_inb;
+        sun_fdops.fd_outb = sun_82077_fd_outb;
+
+	can_use_virtual_dma = use_virtual_dma = 1;
+	sun_fdops.fd_enable_dma = sun_fd_enable_dma;
+	sun_fdops.fd_disable_dma = sun_fd_disable_dma;
+	sun_fdops.fd_set_dma_mode = sun_fd_set_dma_mode;
+	sun_fdops.fd_set_dma_addr = sun_fd_set_dma_addr;
+	sun_fdops.fd_set_dma_count = sun_fd_set_dma_count;
+	sun_fdops.get_dma_residue = sun_get_dma_residue;
+
+	sun_fdops.fd_request_irq = sun_fd_request_irq;
+	sun_fdops.fd_free_irq = sun_fd_free_irq;
+
+	sun_fdops.fd_eject = sun_fd_eject;
+
+        fdc_status = (unsigned long) &sun_fdc->status_82077;
+
+	/* Success... */
+	allowed_drive_mask = 0x01;
+	sun_floppy_types[0] = 4;
+	sun_floppy_types[1] = 0;
+
+	return sun_floppy_types[0];
+}
+
+#define EXTRA_FLOPPY_PARAMS
+
+static DEFINE_SPINLOCK(dma_spin_lock);
+
+#define claim_dma_lock() \
+({	unsigned long flags; \
+	spin_lock_irqsave(&dma_spin_lock, flags); \
+	flags; \
+})
+
+#define release_dma_lock(__flags) \
+	spin_unlock_irqrestore(&dma_spin_lock, __flags);
+
+#endif /* !(__ASM_SPARC64_FLOPPY_H) */
diff --git a/arch/sparc/include/asm/fpumacro.h b/arch/sparc/include/asm/fpumacro.h
new file mode 100644
index 000000000000..cc463fec806f
--- /dev/null
+++ b/arch/sparc/include/asm/fpumacro.h
@@ -0,0 +1,33 @@
+/* fpumacro.h: FPU related macros.
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC64_FPUMACRO_H
+#define _SPARC64_FPUMACRO_H
+
+#include <asm/asi.h>
+#include <asm/visasm.h>
+
+struct fpustate {
+	u32	regs[64];
+};
+
+#define FPUSTATE (struct fpustate *)(current_thread_info()->fpregs)
+
+static inline unsigned long fprs_read(void)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__("rd %%fprs, %0" : "=r" (retval));
+
+	return retval;
+}
+
+static inline void fprs_write(unsigned long val)
+{
+	__asm__ __volatile__("wr %0, 0x0, %%fprs" : : "r" (val));
+}
+
+#endif /* !(_SPARC64_FPUMACRO_H) */
diff --git a/arch/sparc/include/asm/ftrace.h b/arch/sparc/include/asm/ftrace.h
new file mode 100644
index 000000000000..d27716cd38c1
--- /dev/null
+++ b/arch/sparc/include/asm/ftrace.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_SPARC64_FTRACE
+#define _ASM_SPARC64_FTRACE
+
+#ifdef CONFIG_MCOUNT
+#define MCOUNT_ADDR		((long)(_mcount))
+#define MCOUNT_INSN_SIZE	4 /* sizeof mcount call */
+
+#ifndef __ASSEMBLY__
+extern void _mcount(void);
+#endif
+
+#endif
+
+#endif /* _ASM_SPARC64_FTRACE */
diff --git a/arch/sparc/include/asm/futex.h b/arch/sparc/include/asm/futex.h
new file mode 100644
index 000000000000..736335f36713
--- /dev/null
+++ b/arch/sparc/include/asm/futex.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_FUTEX_H
+#define ___ASM_SPARC_FUTEX_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/futex_64.h>
+#else
+#include <asm/futex_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/futex_32.h b/arch/sparc/include/asm/futex_32.h
new file mode 100644
index 000000000000..6a332a9f099c
--- /dev/null
+++ b/arch/sparc/include/asm/futex_32.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif
diff --git a/arch/sparc/include/asm/futex_64.h b/arch/sparc/include/asm/futex_64.h
new file mode 100644
index 000000000000..47f95839dc69
--- /dev/null
+++ b/arch/sparc/include/asm/futex_64.h
@@ -0,0 +1,110 @@
+#ifndef _SPARC64_FUTEX_H
+#define _SPARC64_FUTEX_H
+
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+#include <asm/system.h>
+
+#define __futex_cas_op(insn, ret, oldval, uaddr, oparg)	\
+	__asm__ __volatile__(				\
+	"\n1:	lduwa	[%3] %%asi, %2\n"		\
+	"	" insn "\n"				\
+	"2:	casa	[%3] %%asi, %2, %1\n"		\
+	"	cmp	%2, %1\n"			\
+	"	bne,pn	%%icc, 1b\n"			\
+	"	 mov	0, %0\n"			\
+	"3:\n"						\
+	"	.section .fixup,#alloc,#execinstr\n"	\
+	"	.align	4\n"				\
+	"4:	sethi	%%hi(3b), %0\n"			\
+	"	jmpl	%0 + %%lo(3b), %%g0\n"		\
+	"	 mov	%5, %0\n"			\
+	"	.previous\n"				\
+	"	.section __ex_table,\"a\"\n"		\
+	"	.align	4\n"				\
+	"	.word	1b, 4b\n"			\
+	"	.word	2b, 4b\n"			\
+	"	.previous\n"				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tem)	\
+	: "r" (uaddr), "r" (oparg), "i" (-EFAULT)	\
+	: "memory")
+
+static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr)
+{
+	int op = (encoded_op >> 28) & 7;
+	int cmp = (encoded_op >> 24) & 15;
+	int oparg = (encoded_op << 8) >> 20;
+	int cmparg = (encoded_op << 20) >> 20;
+	int oldval = 0, ret, tem;
+
+	if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(int))))
+		return -EFAULT;
+	if (unlikely((((unsigned long) uaddr) & 0x3UL)))
+		return -EINVAL;
+
+	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+		oparg = 1 << oparg;
+
+	pagefault_disable();
+
+	switch (op) {
+	case FUTEX_OP_SET:
+		__futex_cas_op("mov\t%4, %1", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ADD:
+		__futex_cas_op("add\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_OR:
+		__futex_cas_op("or\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_ANDN:
+		__futex_cas_op("andn\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		break;
+	case FUTEX_OP_XOR:
+		__futex_cas_op("xor\t%2, %4, %1", ret, oldval, uaddr, oparg);
+		break;
+	default:
+		ret = -ENOSYS;
+	}
+
+	pagefault_enable();
+
+	if (!ret) {
+		switch (cmp) {
+		case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+		case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+		case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+		case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+		case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+		case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+		default: ret = -ENOSYS;
+		}
+	}
+	return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+	__asm__ __volatile__(
+	"\n1:	casa	[%3] %%asi, %2, %0\n"
+	"2:\n"
+	"	.section .fixup,#alloc,#execinstr\n"
+	"	.align	4\n"
+	"3:	sethi	%%hi(2b), %0\n"
+	"	jmpl	%0 + %%lo(2b), %%g0\n"
+	"	 mov	%4, %0\n"
+	"	.previous\n"
+	"	.section __ex_table,\"a\"\n"
+	"	.align	4\n"
+	"	.word	1b, 3b\n"
+	"	.previous\n"
+	: "=r" (newval)
+	: "0" (newval), "r" (oldval), "r" (uaddr), "i" (-EFAULT)
+	: "memory");
+
+	return newval;
+}
+
+#endif /* !(_SPARC64_FUTEX_H) */
diff --git a/arch/sparc/include/asm/hardirq.h b/arch/sparc/include/asm/hardirq.h
new file mode 100644
index 000000000000..44d4e2345148
--- /dev/null
+++ b/arch/sparc/include/asm/hardirq.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_HARDIRQ_H
+#define ___ASM_SPARC_HARDIRQ_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/hardirq_64.h>
+#else
+#include <asm/hardirq_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/hardirq_32.h b/arch/sparc/include/asm/hardirq_32.h
new file mode 100644
index 000000000000..4f63ed8df551
--- /dev/null
+++ b/arch/sparc/include/asm/hardirq_32.h
@@ -0,0 +1,23 @@
+/* hardirq.h: 32-bit Sparc hard IRQ support.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998-2000 Anton Blanchard (anton@samba.org)
+ */
+
+#ifndef __SPARC_HARDIRQ_H
+#define __SPARC_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+
+/* entry.S is sensitive to the offsets of these fields */ /* XXX P3 Is it? */
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS    8
+
+#endif /* __SPARC_HARDIRQ_H */
diff --git a/arch/sparc/include/asm/hardirq_64.h b/arch/sparc/include/asm/hardirq_64.h
new file mode 100644
index 000000000000..7c29fd1a87aa
--- /dev/null
+++ b/arch/sparc/include/asm/hardirq_64.h
@@ -0,0 +1,19 @@
+/* hardirq.h: 64-bit Sparc hard IRQ support.
+ *
+ * Copyright (C) 1997, 1998, 2005 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef __SPARC64_HARDIRQ_H
+#define __SPARC64_HARDIRQ_H
+
+#include <asm/cpudata.h>
+
+#define __ARCH_IRQ_STAT
+#define local_softirq_pending() \
+	(local_cpu_data().__softirq_pending)
+
+void ack_bad_irq(unsigned int irq);
+
+#define HARDIRQ_BITS	8
+
+#endif /* !(__SPARC64_HARDIRQ_H) */
diff --git a/arch/sparc/include/asm/head.h b/arch/sparc/include/asm/head.h
new file mode 100644
index 000000000000..be8f03f3e731
--- /dev/null
+++ b/arch/sparc/include/asm/head.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_HEAD_H
+#define ___ASM_SPARC_HEAD_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/head_64.h>
+#else
+#include <asm/head_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/head_32.h b/arch/sparc/include/asm/head_32.h
new file mode 100644
index 000000000000..7c35491a8b53
--- /dev/null
+++ b/arch/sparc/include/asm/head_32.h
@@ -0,0 +1,102 @@
+#ifndef __SPARC_HEAD_H
+#define __SPARC_HEAD_H
+
+#define KERNBASE        0xf0000000  /* First address the kernel will eventually be */
+#define LOAD_ADDR       0x4000      /* prom jumps to us here unless this is elf /boot */
+#define SUN4C_SEGSZ     (1 << 18)
+#define SRMMU_L1_KBASE_OFFSET ((KERNBASE>>24)<<2)  /* Used in boot remapping. */
+#define INTS_ENAB        0x01           /* entry.S uses this. */
+
+#define SUN4_PROM_VECTOR 0xFFE81000     /* SUN4 PROM needs to be hardwired */
+
+#define WRITE_PAUSE      nop; nop; nop; /* Have to do this after %wim/%psr chg */
+#define NOP_INSN         0x01000000     /* Used to patch sparc_save_state */
+
+/* Here are some trap goodies */
+
+/* Generic trap entry. */
+#define TRAP_ENTRY(type, label) \
+	rd %psr, %l0; b label; rd %wim, %l3; nop;
+
+/* Data/text faults. Defaults to sun4c version at boot time. */
+#define SPARC_TFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 1, %l7;
+#define SPARC_DFAULT rd %psr, %l0; rd %wim, %l3; b sun4c_fault; mov 0, %l7;
+#define SRMMU_TFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 1, %l7;
+#define SRMMU_DFAULT rd %psr, %l0; rd %wim, %l3; b srmmu_fault; mov 0, %l7;
+
+/* This is for traps we should NEVER get. */
+#define BAD_TRAP(num) \
+        rd %psr, %l0; mov num, %l7; b bad_trap_handler; rd %wim, %l3;
+
+/* This is for traps when we want just skip the instruction which caused it */
+#define SKIP_TRAP(type, name) \
+	jmpl %l2, %g0; rett %l2 + 4; nop; nop;
+
+/* Notice that for the system calls we pull a trick.  We load up a
+ * different pointer to the system call vector table in %l7, but call
+ * the same generic system call low-level entry point.  The trap table
+ * entry sequences are also HyperSparc pipeline friendly ;-)
+ */
+
+/* Software trap for Linux system calls. */
+#define LINUX_SYSCALL_TRAP \
+        sethi %hi(sys_call_table), %l7; \
+        or %l7, %lo(sys_call_table), %l7; \
+        b linux_sparc_syscall; \
+        rd %psr, %l0;
+
+#define BREAKPOINT_TRAP \
+	b breakpoint_trap; \
+	rd %psr,%l0; \
+	nop; \
+	nop;
+
+#ifdef CONFIG_KGDB
+#define KGDB_TRAP(num) \
+	b kgdb_trap_low; \
+	rd %psr,%l0; \
+	nop; \
+	nop;
+#else
+#define KGDB_TRAP(num) \
+	BAD_TRAP(num)
+#endif
+
+/* The Get Condition Codes software trap for userland. */
+#define GETCC_TRAP \
+        b getcc_trap_handler; mov %psr, %l0; nop; nop;
+
+/* The Set Condition Codes software trap for userland. */
+#define SETCC_TRAP \
+        b setcc_trap_handler; mov %psr, %l0; nop; nop;
+
+/* The Get PSR software trap for userland. */
+#define GETPSR_TRAP \
+	mov %psr, %i0; jmp %l2; rett %l2 + 4; nop;
+
+/* This is for hard interrupts from level 1-14, 15 is non-maskable (nmi) and
+ * gets handled with another macro.
+ */
+#define TRAP_ENTRY_INTERRUPT(int_level) \
+        mov int_level, %l7; rd %psr, %l0; b real_irq_entry; rd %wim, %l3;
+
+/* NMI's (Non Maskable Interrupts) are special, you can't keep them
+ * from coming in, and basically if you get one, the shows over. ;(
+ * On the sun4c they are usually asynchronous memory errors, on the
+ * the sun4m they could be either due to mem errors or a software
+ * initiated interrupt from the prom/kern on an SMP box saying "I
+ * command you to do CPU tricks, read your mailbox for more info."
+ */
+#define NMI_TRAP \
+        rd %wim, %l3; b linux_trap_nmi_sun4c; mov %psr, %l0; nop;
+
+/* Window overflows/underflows are special and we need to try to be as
+ * efficient as possible here....
+ */
+#define WINDOW_SPILL \
+        rd %psr, %l0; rd %wim, %l3; b spill_window_entry; andcc %l0, PSR_PS, %g0;
+
+#define WINDOW_FILL \
+        rd %psr, %l0; rd %wim, %l3; b fill_window_entry; andcc %l0, PSR_PS, %g0;
+
+#endif /* __SPARC_HEAD_H */
diff --git a/arch/sparc/include/asm/head_64.h b/arch/sparc/include/asm/head_64.h
new file mode 100644
index 000000000000..10e9dabc4c41
--- /dev/null
+++ b/arch/sparc/include/asm/head_64.h
@@ -0,0 +1,76 @@
+#ifndef _SPARC64_HEAD_H
+#define _SPARC64_HEAD_H
+
+#include <asm/pstate.h>
+
+	/* wrpr	%g0, val, %gl */
+#define SET_GL(val)	\
+	.word	0xa1902000 | val
+
+	/* rdpr %gl, %gN */
+#define GET_GL_GLOBAL(N)	\
+	.word	0x81540000 | (N << 25)
+
+#define KERNBASE	0x400000
+
+#define	PTREGS_OFF	(STACK_BIAS + STACKFRAME_SZ)
+
+#define __CHEETAH_ID	0x003e0014
+#define __JALAPENO_ID	0x003e0016
+#define __SERRANO_ID	0x003e0022
+
+#define CHEETAH_MANUF		0x003e
+#define CHEETAH_IMPL		0x0014 /* Ultra-III   */
+#define CHEETAH_PLUS_IMPL	0x0015 /* Ultra-III+  */
+#define JALAPENO_IMPL		0x0016 /* Ultra-IIIi  */
+#define JAGUAR_IMPL		0x0018 /* Ultra-IV    */
+#define PANTHER_IMPL		0x0019 /* Ultra-IV+   */
+#define SERRANO_IMPL		0x0022 /* Ultra-IIIi+ */
+
+#define BRANCH_IF_SUN4V(tmp1,label)		\
+	sethi	%hi(is_sun4v), %tmp1;		\
+	lduw	[%tmp1 + %lo(is_sun4v)], %tmp1; \
+	brnz,pn	%tmp1, label;			\
+	 nop
+
+#define BRANCH_IF_CHEETAH_BASE(tmp1,tmp2,label)	\
+	rdpr	%ver, %tmp1;			\
+	sethi	%hi(__CHEETAH_ID), %tmp2;	\
+	srlx	%tmp1, 32, %tmp1;		\
+	or	%tmp2, %lo(__CHEETAH_ID), %tmp2;\
+	cmp	%tmp1, %tmp2;			\
+	be,pn	%icc, label;			\
+	 nop;
+
+#define BRANCH_IF_JALAPENO(tmp1,tmp2,label)	\
+	rdpr	%ver, %tmp1;			\
+	sethi	%hi(__JALAPENO_ID), %tmp2;	\
+	srlx	%tmp1, 32, %tmp1;		\
+	or	%tmp2, %lo(__JALAPENO_ID), %tmp2;\
+	cmp	%tmp1, %tmp2;			\
+	be,pn	%icc, label;			\
+	 nop;
+
+#define BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(tmp1,tmp2,label)	\
+	rdpr	%ver, %tmp1;			\
+	srlx	%tmp1, (32 + 16), %tmp2;	\
+	cmp	%tmp2, CHEETAH_MANUF;		\
+	bne,pt	%xcc, 99f;			\
+	 sllx	%tmp1, 16, %tmp1;		\
+	srlx	%tmp1, (32 + 16), %tmp2;	\
+	cmp	%tmp2, CHEETAH_PLUS_IMPL;	\
+	bgeu,pt	%xcc, label;			\
+99:	 nop;
+
+#define BRANCH_IF_ANY_CHEETAH(tmp1,tmp2,label)	\
+	rdpr	%ver, %tmp1;			\
+	srlx	%tmp1, (32 + 16), %tmp2;	\
+	cmp	%tmp2, CHEETAH_MANUF;		\
+	bne,pt	%xcc, 99f;			\
+	 sllx	%tmp1, 16, %tmp1;		\
+	srlx	%tmp1, (32 + 16), %tmp2;	\
+	cmp	%tmp2, CHEETAH_IMPL;		\
+	bgeu,pt	%xcc, label;			\
+99:	 nop;
+
+#endif /* !(_SPARC64_HEAD_H) */
diff --git a/arch/sparc/include/asm/highmem.h b/arch/sparc/include/asm/highmem.h
new file mode 100644
index 000000000000..3de42e776274
--- /dev/null
+++ b/arch/sparc/include/asm/highmem.h
@@ -0,0 +1,81 @@
+/*
+ * highmem.h: virtual kernel memory mappings for high memory
+ *
+ * Used in CONFIG_HIGHMEM systems for memory pages which
+ * are not addressable by direct kernel virtual addresses.
+ *
+ * Copyright (C) 1999 Gerhard Wichert, Siemens AG
+ *		      Gerhard.Wichert@pdb.siemens.de
+ *
+ *
+ * Redesigned the x86 32-bit VM architecture to deal with 
+ * up to 16 Terrabyte physical memory. With current x86 CPUs
+ * we now support up to 64 Gigabytes physical RAM.
+ *
+ * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
+ */
+
+#ifndef _ASM_HIGHMEM_H
+#define _ASM_HIGHMEM_H
+
+#ifdef __KERNEL__
+
+#include <linux/interrupt.h>
+#include <asm/fixmap.h>
+#include <asm/vaddrs.h>
+#include <asm/kmap_types.h>
+#include <asm/pgtable.h>
+
+/* declarations for highmem.c */
+extern unsigned long highstart_pfn, highend_pfn;
+
+extern pte_t *kmap_pte;
+extern pgprot_t kmap_prot;
+extern pte_t *pkmap_page_table;
+
+extern void kmap_init(void) __init;
+
+/*
+ * Right now we initialize only a single pte table. It can be extended
+ * easily, subsequent pte tables have to be allocated in one physical
+ * chunk of RAM.  Currently the simplest way to do this is to align the
+ * pkmap region on a pagetable boundary (4MB).
+ */
+#define LAST_PKMAP 1024
+#define PKMAP_SIZE (LAST_PKMAP << PAGE_SHIFT)
+#define PKMAP_BASE PMD_ALIGN(SRMMU_NOCACHE_VADDR + (SRMMU_MAX_NOCACHE_PAGES << PAGE_SHIFT))
+
+#define LAST_PKMAP_MASK (LAST_PKMAP - 1)
+#define PKMAP_NR(virt)  ((virt - PKMAP_BASE) >> PAGE_SHIFT)
+#define PKMAP_ADDR(nr)  (PKMAP_BASE + ((nr) << PAGE_SHIFT))
+
+#define PKMAP_END (PKMAP_ADDR(LAST_PKMAP))
+
+extern void *kmap_high(struct page *page);
+extern void kunmap_high(struct page *page);
+
+static inline void *kmap(struct page *page)
+{
+	BUG_ON(in_interrupt());
+	if (!PageHighMem(page))
+		return page_address(page);
+	return kmap_high(page);
+}
+
+static inline void kunmap(struct page *page)
+{
+	BUG_ON(in_interrupt());
+	if (!PageHighMem(page))
+		return;
+	kunmap_high(page);
+}
+
+extern void *kmap_atomic(struct page *page, enum km_type type);
+extern void kunmap_atomic(void *kvaddr, enum km_type type);
+extern struct page *kmap_atomic_to_page(void *vaddr);
+
+#define flush_cache_kmaps()	flush_cache_all()
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_HIGHMEM_H */
diff --git a/arch/sparc/include/asm/hugetlb.h b/arch/sparc/include/asm/hugetlb.h
new file mode 100644
index 000000000000..177061064ee6
--- /dev/null
+++ b/arch/sparc/include/asm/hugetlb.h
@@ -0,0 +1,85 @@
+#ifndef _ASM_SPARC64_HUGETLB_H
+#define _ASM_SPARC64_HUGETLB_H
+
+#include <asm/page.h>
+
+
+void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
+		     pte_t *ptep, pte_t pte);
+
+pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep);
+
+void hugetlb_prefault_arch_hook(struct mm_struct *mm);
+
+static inline int is_hugepage_only_range(struct mm_struct *mm,
+					 unsigned long addr,
+					 unsigned long len) {
+	return 0;
+}
+
+/*
+ * If the arch doesn't supply something else, assume that hugepage
+ * size aligned regions are ok without further preparation.
+ */
+static inline int prepare_hugepage_range(struct file *file,
+			unsigned long addr, unsigned long len)
+{
+	if (len & ~HPAGE_MASK)
+		return -EINVAL;
+	if (addr & ~HPAGE_MASK)
+		return -EINVAL;
+	return 0;
+}
+
+static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb,
+					  unsigned long addr, unsigned long end,
+					  unsigned long floor,
+					  unsigned long ceiling)
+{
+	free_pgd_range(tlb, addr, end, floor, ceiling);
+}
+
+static inline void huge_ptep_clear_flush(struct vm_area_struct *vma,
+					 unsigned long addr, pte_t *ptep)
+{
+}
+
+static inline int huge_pte_none(pte_t pte)
+{
+	return pte_none(pte);
+}
+
+static inline pte_t huge_pte_wrprotect(pte_t pte)
+{
+	return pte_wrprotect(pte);
+}
+
+static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
+					   unsigned long addr, pte_t *ptep)
+{
+	ptep_set_wrprotect(mm, addr, ptep);
+}
+
+static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma,
+					     unsigned long addr, pte_t *ptep,
+					     pte_t pte, int dirty)
+{
+	return ptep_set_access_flags(vma, addr, ptep, pte, dirty);
+}
+
+static inline pte_t huge_ptep_get(pte_t *ptep)
+{
+	return *ptep;
+}
+
+static inline int arch_prepare_hugepage(struct page *page)
+{
+	return 0;
+}
+
+static inline void arch_release_hugepage(struct page *page)
+{
+}
+
+#endif /* _ASM_SPARC64_HUGETLB_H */
diff --git a/arch/sparc/include/asm/hvtramp.h b/arch/sparc/include/asm/hvtramp.h
new file mode 100644
index 000000000000..b2b9b947b3a4
--- /dev/null
+++ b/arch/sparc/include/asm/hvtramp.h
@@ -0,0 +1,37 @@
+#ifndef _SPARC64_HVTRAP_H
+#define _SPARC64_HVTRAP_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct hvtramp_mapping {
+	__u64		vaddr;
+	__u64		tte;
+};
+
+struct hvtramp_descr {
+	__u32			cpu;
+	__u32			num_mappings;
+	__u64			fault_info_va;
+	__u64			fault_info_pa;
+	__u64			thread_reg;
+	struct hvtramp_mapping	maps[1];
+};
+
+extern void hv_cpu_startup(unsigned long hvdescr_pa);
+
+#endif
+
+#define HVTRAMP_DESCR_CPU		0x00
+#define HVTRAMP_DESCR_NUM_MAPPINGS	0x04
+#define HVTRAMP_DESCR_FAULT_INFO_VA	0x08
+#define HVTRAMP_DESCR_FAULT_INFO_PA	0x10
+#define HVTRAMP_DESCR_THREAD_REG	0x18
+#define HVTRAMP_DESCR_MAPS		0x20
+
+#define HVTRAMP_MAPPING_VADDR		0x00
+#define HVTRAMP_MAPPING_TTE		0x08
+#define HVTRAMP_MAPPING_SIZE		0x10
+
+#endif /* _SPARC64_HVTRAP_H */
diff --git a/arch/sparc/include/asm/hw_irq.h b/arch/sparc/include/asm/hw_irq.h
new file mode 100644
index 000000000000..8d30a7694be2
--- /dev/null
+++ b/arch/sparc/include/asm/hw_irq.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_SPARC_HW_IRQ_H
+#define __ASM_SPARC_HW_IRQ_H
+
+/* Dummy include. */
+
+#endif
diff --git a/arch/sparc/include/asm/hypervisor.h b/arch/sparc/include/asm/hypervisor.h
new file mode 100644
index 000000000000..109ae24ba242
--- /dev/null
+++ b/arch/sparc/include/asm/hypervisor.h
@@ -0,0 +1,2949 @@
+#ifndef _SPARC64_HYPERVISOR_H
+#define _SPARC64_HYPERVISOR_H
+
+/* Sun4v hypervisor interfaces and defines.
+ *
+ * Hypervisor calls are made via traps to software traps number 0x80
+ * and above.  Registers %o0 to %o5 serve as argument, status, and
+ * return value registers.
+ *
+ * There are two kinds of these traps.  First there are the normal
+ * "fast traps" which use software trap 0x80 and encode the function
+ * to invoke by number in register %o5.  Argument and return value
+ * handling is as follows:
+ *
+ * -----------------------------------------------
+ * |  %o5  | function number |     undefined     |
+ * |  %o0  |   argument 0    |   return status   |
+ * |  %o1  |   argument 1    |   return value 1  |
+ * |  %o2  |   argument 2    |   return value 2  |
+ * |  %o3  |   argument 3    |   return value 3  |
+ * |  %o4  |   argument 4    |   return value 4  |
+ * -----------------------------------------------
+ *
+ * The second type are "hyper-fast traps" which encode the function
+ * number in the software trap number itself.  So these use trap
+ * numbers > 0x80.  The register usage for hyper-fast traps is as
+ * follows:
+ *
+ * -----------------------------------------------
+ * |  %o0  |   argument 0    |   return status   |
+ * |  %o1  |   argument 1    |   return value 1  |
+ * |  %o2  |   argument 2    |   return value 2  |
+ * |  %o3  |   argument 3    |   return value 3  |
+ * |  %o4  |   argument 4    |   return value 4  |
+ * -----------------------------------------------
+ *
+ * Registers providing explicit arguments to the hypervisor calls
+ * are volatile across the call.  Upon return their values are
+ * undefined unless explicitly specified as containing a particular
+ * return value by the specific call.  The return status is always
+ * returned in register %o0, zero indicates a successful execution of
+ * the hypervisor call and other values indicate an error status as
+ * defined below.  So, for example, if a hyper-fast trap takes
+ * arguments 0, 1, and 2, then %o0, %o1, and %o2 are volatile across
+ * the call and %o3, %o4, and %o5 would be preserved.
+ *
+ * If the hypervisor trap is invalid, or the fast trap function number
+ * is invalid, HV_EBADTRAP will be returned in %o0.  Also, all 64-bits
+ * of the argument and return values are significant.
+ */
+
+/* Trap numbers.  */
+#define HV_FAST_TRAP		0x80
+#define HV_MMU_MAP_ADDR_TRAP	0x83
+#define HV_MMU_UNMAP_ADDR_TRAP	0x84
+#define HV_TTRACE_ADDENTRY_TRAP	0x85
+#define HV_CORE_TRAP		0xff
+
+/* Error codes.  */
+#define HV_EOK				0  /* Successful return            */
+#define HV_ENOCPU			1  /* Invalid CPU id               */
+#define HV_ENORADDR			2  /* Invalid real address         */
+#define HV_ENOINTR			3  /* Invalid interrupt id         */
+#define HV_EBADPGSZ			4  /* Invalid pagesize encoding    */
+#define HV_EBADTSB			5  /* Invalid TSB description      */
+#define HV_EINVAL			6  /* Invalid argument             */
+#define HV_EBADTRAP			7  /* Invalid function number      */
+#define HV_EBADALIGN			8  /* Invalid address alignment    */
+#define HV_EWOULDBLOCK			9  /* Cannot complete w/o blocking */
+#define HV_ENOACCESS			10 /* No access to resource        */
+#define HV_EIO				11 /* I/O error                    */
+#define HV_ECPUERROR			12 /* CPU in error state           */
+#define HV_ENOTSUPPORTED		13 /* Function not supported       */
+#define HV_ENOMAP			14 /* No mapping found             */
+#define HV_ETOOMANY			15 /* Too many items specified     */
+#define HV_ECHANNEL			16 /* Invalid LDC channel          */
+#define HV_EBUSY			17 /* Resource busy                */
+
+/* mach_exit()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_EXIT
+ * ARG0:	exit code
+ * ERRORS:	This service does not return.
+ *
+ * Stop all CPUs in the virtual domain and place them into the stopped
+ * state.  The 64-bit exit code may be passed to a service entity as
+ * the domain's exit status.  On systems without a service entity, the
+ * domain will undergo a reset, and the boot firmware will be
+ * reloaded.
+ *
+ * This function will never return to the guest that invokes it.
+ *
+ * Note: By convention an exit code of zero denotes a successful exit by
+ *       the guest code.  A non-zero exit code denotes a guest specific
+ *       error indication.
+ *
+ */
+#define HV_FAST_MACH_EXIT		0x00
+
+#ifndef __ASSEMBLY__
+extern void sun4v_mach_exit(unsigned long exit_code);
+#endif
+
+/* Domain services.  */
+
+/* mach_desc()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_DESC
+ * ARG0:	buffer
+ * ARG1:	length
+ * RET0:	status
+ * RET1:	length
+ * ERRORS:	HV_EBADALIGN	Buffer is badly aligned
+ *		HV_ENORADDR	Buffer is to an illegal real address.
+ *		HV_EINVAL	Buffer length is too small for complete
+ *				machine description.
+ *
+ * Copy the most current machine description into the buffer indicated
+ * by the real address in ARG0.  The buffer provided must be 16 byte
+ * aligned.  Upon success or HV_EINVAL, this service returns the
+ * actual size of the machine description in the RET1 return value.
+ *
+ * Note: A method of determining the appropriate buffer size for the
+ *       machine description is to first call this service with a buffer
+ *       length of 0 bytes.
+ */
+#define HV_FAST_MACH_DESC		0x01
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mach_desc(unsigned long buffer_pa,
+				     unsigned long buf_len,
+				     unsigned long *real_buf_len);
+#endif
+
+/* mach_sir()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_SIR
+ * ERRORS:	This service does not return.
+ *
+ * Perform a software initiated reset of the virtual machine domain.
+ * All CPUs are captured as soon as possible, all hardware devices are
+ * returned to the entry default state, and the domain is restarted at
+ * the SIR (trap type 0x04) real trap table (RTBA) entry point on one
+ * of the CPUs.  The single CPU restarted is selected as determined by
+ * platform specific policy.  Memory is preserved across this
+ * operation.
+ */
+#define HV_FAST_MACH_SIR		0x02
+
+#ifndef __ASSEMBLY__
+extern void sun4v_mach_sir(void);
+#endif
+
+/* mach_set_watchdog()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_SET_WATCHDOG
+ * ARG0:	timeout in milliseconds
+ * RET0:	status
+ * RET1:	time remaining in milliseconds
+ *
+ * A guest uses this API to set a watchdog timer.  Once the gues has set
+ * the timer, it must call the timer service again either to disable or
+ * postpone the expiration.  If the timer expires before being reset or
+ * disabled, then the hypervisor take a platform specific action leading
+ * to guest termination within a bounded time period.  The platform action
+ * may include recovery actions such as reporting the expiration to a
+ * Service Processor, and/or automatically restarting the gues.
+ *
+ * The 'timeout' parameter is specified in milliseconds, however the
+ * implementated granularity is given by the 'watchdog-resolution'
+ * property in the 'platform' node of the guest's machine description.
+ * The largest allowed timeout value is specified by the
+ * 'watchdog-max-timeout' property of the 'platform' node.
+ *
+ * If the 'timeout' argument is not zero, the watchdog timer is set to
+ * expire after a minimum of 'timeout' milliseconds.
+ *
+ * If the 'timeout' argument is zero, the watchdog timer is disabled.
+ *
+ * If the 'timeout' value exceeds the value of the 'max-watchdog-timeout'
+ * property, the hypervisor leaves the watchdog timer state unchanged,
+ * and returns a status of EINVAL.
+ *
+ * The 'time remaining' return value is valid regardless of whether the
+ * return status is EOK or EINVAL.  A non-zero return value indicates the
+ * number of milliseconds that were remaining until the timer was to expire.
+ * If less than one millisecond remains, the return value is '1'.  If the
+ * watchdog timer was disabled at the time of the call, the return value is
+ * zero.
+ *
+ * If the hypervisor cannot support the exact timeout value requested, but
+ * can support a larger timeout value, the hypervisor may round the actual
+ * timeout to a value larger than the requested timeout, consequently the
+ * 'time remaining' return value may be larger than the previously requested
+ * timeout value.
+ *
+ * Any guest OS debugger should be aware that the watchdog service may be in
+ * use.  Consequently, it is recommended that the watchdog service is
+ * disabled upon debugger entry (e.g. reaching a breakpoint), and then
+ * re-enabled upon returning to normal execution.  The API has been designed
+ * with this in mind, and the 'time remaining' result of the disable call may
+ * be used directly as the timeout argument of the re-enable call.
+ */
+#define HV_FAST_MACH_SET_WATCHDOG	0x05
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mach_set_watchdog(unsigned long timeout,
+					     unsigned long *orig_timeout);
+#endif
+
+/* CPU services.
+ *
+ * CPUs represent devices that can execute software threads.  A single
+ * chip that contains multiple cores or strands is represented as
+ * multiple CPUs with unique CPU identifiers.  CPUs are exported to
+ * OBP via the machine description (and to the OS via the OBP device
+ * tree).  CPUs are always in one of three states: stopped, running,
+ * or error.
+ *
+ * A CPU ID is a pre-assigned 16-bit value that uniquely identifies a
+ * CPU within a logical domain.  Operations that are to be performed
+ * on multiple CPUs specify them via a CPU list.  A CPU list is an
+ * array in real memory, of which each 16-bit word is a CPU ID.  CPU
+ * lists are passed through the API as two arguments.  The first is
+ * the number of entries (16-bit words) in the CPU list, and the
+ * second is the (real address) pointer to the CPU ID list.
+ */
+
+/* cpu_start()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_START
+ * ARG0:	CPU ID
+ * ARG1:	PC
+ * ARG2:	RTBA
+ * ARG3:	target ARG0
+ * RET0:	status
+ * ERRORS:	ENOCPU		Invalid CPU ID
+ *		EINVAL		Target CPU ID is not in the stopped state
+ *		ENORADDR	Invalid PC or RTBA real address
+ *		EBADALIGN	Unaligned PC or unaligned RTBA
+ *		EWOULDBLOCK	Starting resources are not available
+ *
+ * Start CPU with given CPU ID with PC in %pc and with a real trap
+ * base address value of RTBA.  The indicated CPU must be in the
+ * stopped state.  The supplied RTBA must be aligned on a 256 byte
+ * boundary.  On successful completion, the specified CPU will be in
+ * the running state and will be supplied with "target ARG0" in %o0
+ * and RTBA in %tba.
+ */
+#define HV_FAST_CPU_START		0x10
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_start(unsigned long cpuid,
+				     unsigned long pc,
+				     unsigned long rtba,
+				     unsigned long arg0);
+#endif
+
+/* cpu_stop()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_STOP
+ * ARG0:	CPU ID
+ * RET0:	status
+ * ERRORS:	ENOCPU		Invalid CPU ID
+ *		EINVAL		Target CPU ID is the current cpu
+ *		EINVAL		Target CPU ID is not in the running state
+ *		EWOULDBLOCK	Stopping resources are not available
+ *		ENOTSUPPORTED	Not supported on this platform
+ *
+ * The specified CPU is stopped.  The indicated CPU must be in the
+ * running state.  On completion, it will be in the stopped state.  It
+ * is not legal to stop the current CPU.
+ *
+ * Note: As this service cannot be used to stop the current cpu, this service
+ *       may not be used to stop the last running CPU in a domain.  To stop
+ *       and exit a running domain, a guest must use the mach_exit() service.
+ */
+#define HV_FAST_CPU_STOP		0x11
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_stop(unsigned long cpuid);
+#endif
+
+/* cpu_yield()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_YIELD
+ * RET0:	status
+ * ERRORS:	No possible error.
+ *
+ * Suspend execution on the current CPU.  Execution will resume when
+ * an interrupt (device, %stick_compare, or cross-call) is targeted to
+ * the CPU.  On some CPUs, this API may be used by the hypervisor to
+ * save power by disabling hardware strands.
+ */
+#define HV_FAST_CPU_YIELD		0x12
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_yield(void);
+#endif
+
+/* cpu_qconf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_QCONF
+ * ARG0:	queue
+ * ARG1:	base real address
+ * ARG2:	number of entries
+ * RET0:	status
+ * ERRORS:	ENORADDR	Invalid base real address
+ *		EINVAL		Invalid queue or number of entries is less
+ *				than 2 or too large.
+ *		EBADALIGN	Base real address is not correctly aligned
+ *				for size.
+ *
+ * Configure the given queue to be placed at the given base real
+ * address, with the given number of entries.  The number of entries
+ * must be a power of 2.  The base real address must be aligned
+ * exactly to match the queue size.  Each queue entry is 64 bytes
+ * long, so for example a 32 entry queue must be aligned on a 2048
+ * byte real address boundary.
+ *
+ * The specified queue is unconfigured if the number of entries is given
+ * as zero.
+ *
+ * For the current version of this API service, the argument queue is defined
+ * as follows:
+ *
+ *	queue		description
+ *	-----		-------------------------
+ *	0x3c		cpu mondo queue
+ *	0x3d		device mondo queue
+ *	0x3e		resumable error queue
+ *	0x3f		non-resumable error queue
+ *
+ * Note: The maximum number of entries for each queue for a specific cpu may
+ *       be determined from the machine description.
+ */
+#define HV_FAST_CPU_QCONF		0x14
+#define  HV_CPU_QUEUE_CPU_MONDO		 0x3c
+#define  HV_CPU_QUEUE_DEVICE_MONDO	 0x3d
+#define  HV_CPU_QUEUE_RES_ERROR		 0x3e
+#define  HV_CPU_QUEUE_NONRES_ERROR	 0x3f
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_qconf(unsigned long type,
+				     unsigned long queue_paddr,
+				     unsigned long num_queue_entries);
+#endif
+
+/* cpu_qinfo()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_QINFO
+ * ARG0:	queue
+ * RET0:	status
+ * RET1:	base real address
+ * RET1:	number of entries
+ * ERRORS:	EINVAL		Invalid queue
+ *
+ * Return the configuration info for the given queue.  The base real
+ * address and number of entries of the defined queue are returned.
+ * The queue argument values are the same as for cpu_qconf() above.
+ *
+ * If the specified queue is a valid queue number, but no queue has
+ * been defined, the number of entries will be set to zero and the
+ * base real address returned is undefined.
+ */
+#define HV_FAST_CPU_QINFO		0x15
+
+/* cpu_mondo_send()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_MONDO_SEND
+ * ARG0-1:	CPU list
+ * ARG2:	data real address
+ * RET0:	status
+ * ERRORS:	EBADALIGN	Mondo data is not 64-byte aligned or CPU list
+ *				is not 2-byte aligned.
+ *		ENORADDR	Invalid data mondo address, or invalid cpu list
+ *				address.
+ *		ENOCPU		Invalid cpu in CPU list
+ *		EWOULDBLOCK	Some or all of the listed CPUs did not receive
+ *				the mondo
+ *		ECPUERROR	One or more of the listed CPUs are in error
+ *				state, use HV_FAST_CPU_STATE to see which ones
+ *		EINVAL		CPU list includes caller's CPU ID
+ *
+ * Send a mondo interrupt to the CPUs in the given CPU list with the
+ * 64-bytes at the given data real address.  The data must be 64-byte
+ * aligned.  The mondo data will be delivered to the cpu_mondo queues
+ * of the recipient CPUs.
+ *
+ * In all cases, error or not, the CPUs in the CPU list to which the
+ * mondo has been successfully delivered will be indicated by having
+ * their entry in CPU list updated with the value 0xffff.
+ */
+#define HV_FAST_CPU_MONDO_SEND		0x42
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_cpu_mondo_send(unsigned long cpu_count, unsigned long cpu_list_pa, unsigned long mondo_block_pa);
+#endif
+
+/* cpu_myid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_MYID
+ * RET0:	status
+ * RET1:	CPU ID
+ * ERRORS:	No errors defined.
+ *
+ * Return the hypervisor ID handle for the current CPU.  Use by a
+ * virtual CPU to discover it's own identity.
+ */
+#define HV_FAST_CPU_MYID		0x16
+
+/* cpu_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_STATE
+ * ARG0:	CPU ID
+ * RET0:	status
+ * RET1:	state
+ * ERRORS:	ENOCPU		Invalid CPU ID
+ *
+ * Retrieve the current state of the CPU with the given CPU ID.
+ */
+#define HV_FAST_CPU_STATE		0x17
+#define  HV_CPU_STATE_STOPPED		 0x01
+#define  HV_CPU_STATE_RUNNING		 0x02
+#define  HV_CPU_STATE_ERROR		 0x03
+
+#ifndef __ASSEMBLY__
+extern long sun4v_cpu_state(unsigned long cpuid);
+#endif
+
+/* cpu_set_rtba()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_SET_RTBA
+ * ARG0:	RTBA
+ * RET0:	status
+ * RET1:	previous RTBA
+ * ERRORS:	ENORADDR	Invalid RTBA real address
+ *		EBADALIGN	RTBA is incorrectly aligned for a trap table
+ *
+ * Set the real trap base address of the local cpu to the given RTBA.
+ * The supplied RTBA must be aligned on a 256 byte boundary.  Upon
+ * success the previous value of the RTBA is returned in RET1.
+ *
+ * Note: This service does not affect %tba
+ */
+#define HV_FAST_CPU_SET_RTBA		0x18
+
+/* cpu_set_rtba()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CPU_GET_RTBA
+ * RET0:	status
+ * RET1:	previous RTBA
+ * ERRORS:	No possible error.
+ *
+ * Returns the current value of RTBA in RET1.
+ */
+#define HV_FAST_CPU_GET_RTBA		0x19
+
+/* MMU services.
+ *
+ * Layout of a TSB description for mmu_tsb_ctx{,non}0() calls.
+ */
+#ifndef __ASSEMBLY__
+struct hv_tsb_descr {
+	unsigned short		pgsz_idx;
+	unsigned short		assoc;
+	unsigned int		num_ttes;	/* in TTEs */
+	unsigned int		ctx_idx;
+	unsigned int		pgsz_mask;
+	unsigned long		tsb_base;
+	unsigned long		resv;
+};
+#endif
+#define HV_TSB_DESCR_PGSZ_IDX_OFFSET	0x00
+#define HV_TSB_DESCR_ASSOC_OFFSET	0x02
+#define HV_TSB_DESCR_NUM_TTES_OFFSET	0x04
+#define HV_TSB_DESCR_CTX_IDX_OFFSET	0x08
+#define HV_TSB_DESCR_PGSZ_MASK_OFFSET	0x0c
+#define HV_TSB_DESCR_TSB_BASE_OFFSET	0x10
+#define HV_TSB_DESCR_RESV_OFFSET	0x18
+
+/* Page size bitmask.  */
+#define HV_PGSZ_MASK_8K			(1 << 0)
+#define HV_PGSZ_MASK_64K		(1 << 1)
+#define HV_PGSZ_MASK_512K		(1 << 2)
+#define HV_PGSZ_MASK_4MB		(1 << 3)
+#define HV_PGSZ_MASK_32MB		(1 << 4)
+#define HV_PGSZ_MASK_256MB		(1 << 5)
+#define HV_PGSZ_MASK_2GB		(1 << 6)
+#define HV_PGSZ_MASK_16GB		(1 << 7)
+
+/* Page size index.  The value given in the TSB descriptor must correspond
+ * to the smallest page size specified in the pgsz_mask page size bitmask.
+ */
+#define HV_PGSZ_IDX_8K			0
+#define HV_PGSZ_IDX_64K			1
+#define HV_PGSZ_IDX_512K		2
+#define HV_PGSZ_IDX_4MB			3
+#define HV_PGSZ_IDX_32MB		4
+#define HV_PGSZ_IDX_256MB		5
+#define HV_PGSZ_IDX_2GB			6
+#define HV_PGSZ_IDX_16GB		7
+
+/* MMU fault status area.
+ *
+ * MMU related faults have their status and fault address information
+ * placed into a memory region made available by privileged code.  Each
+ * virtual processor must make a mmu_fault_area_conf() call to tell the
+ * hypervisor where that processor's fault status should be stored.
+ *
+ * The fault status block is a multiple of 64-bytes and must be aligned
+ * on a 64-byte boundary.
+ */
+#ifndef __ASSEMBLY__
+struct hv_fault_status {
+	unsigned long		i_fault_type;
+	unsigned long		i_fault_addr;
+	unsigned long		i_fault_ctx;
+	unsigned long		i_reserved[5];
+	unsigned long		d_fault_type;
+	unsigned long		d_fault_addr;
+	unsigned long		d_fault_ctx;
+	unsigned long		d_reserved[5];
+};
+#endif
+#define HV_FAULT_I_TYPE_OFFSET	0x00
+#define HV_FAULT_I_ADDR_OFFSET	0x08
+#define HV_FAULT_I_CTX_OFFSET	0x10
+#define HV_FAULT_D_TYPE_OFFSET	0x40
+#define HV_FAULT_D_ADDR_OFFSET	0x48
+#define HV_FAULT_D_CTX_OFFSET	0x50
+
+#define HV_FAULT_TYPE_FAST_MISS	1
+#define HV_FAULT_TYPE_FAST_PROT	2
+#define HV_FAULT_TYPE_MMU_MISS	3
+#define HV_FAULT_TYPE_INV_RA	4
+#define HV_FAULT_TYPE_PRIV_VIOL	5
+#define HV_FAULT_TYPE_PROT_VIOL	6
+#define HV_FAULT_TYPE_NFO	7
+#define HV_FAULT_TYPE_NFO_SEFF	8
+#define HV_FAULT_TYPE_INV_VA	9
+#define HV_FAULT_TYPE_INV_ASI	10
+#define HV_FAULT_TYPE_NC_ATOMIC	11
+#define HV_FAULT_TYPE_PRIV_ACT	12
+#define HV_FAULT_TYPE_RESV1	13
+#define HV_FAULT_TYPE_UNALIGNED	14
+#define HV_FAULT_TYPE_INV_PGSZ	15
+/* Values 16 --> -2 are reserved.  */
+#define HV_FAULT_TYPE_MULTIPLE	-1
+
+/* Flags argument for mmu_{map,unmap}_addr(), mmu_demap_{page,context,all}(),
+ * and mmu_{map,unmap}_perm_addr().
+ */
+#define HV_MMU_DMMU			0x01
+#define HV_MMU_IMMU			0x02
+#define HV_MMU_ALL			(HV_MMU_DMMU | HV_MMU_IMMU)
+
+/* mmu_map_addr()
+ * TRAP:	HV_MMU_MAP_ADDR_TRAP
+ * ARG0:	virtual address
+ * ARG1:	mmu context
+ * ARG2:	TTE
+ * ARG3:	flags (HV_MMU_{IMMU,DMMU})
+ * ERRORS:	EINVAL		Invalid virtual address, mmu context, or flags
+ *		EBADPGSZ	Invalid page size value
+ *		ENORADDR	Invalid real address in TTE
+ *
+ * Create a non-permanent mapping using the given TTE, virtual
+ * address, and mmu context.  The flags argument determines which
+ * (data, or instruction, or both) TLB the mapping gets loaded into.
+ *
+ * The behavior is undefined if the valid bit is clear in the TTE.
+ *
+ * Note: This API call is for privileged code to specify temporary translation
+ *       mappings without the need to create and manage a TSB.
+ */
+
+/* mmu_unmap_addr()
+ * TRAP:	HV_MMU_UNMAP_ADDR_TRAP
+ * ARG0:	virtual address
+ * ARG1:	mmu context
+ * ARG2:	flags (HV_MMU_{IMMU,DMMU})
+ * ERRORS:	EINVAL		Invalid virtual address, mmu context, or flags
+ *
+ * Demaps the given virtual address in the given mmu context on this
+ * CPU.  This function is intended to be used to demap pages mapped
+ * with mmu_map_addr.  This service is equivalent to invoking
+ * mmu_demap_page() with only the current CPU in the CPU list. The
+ * flags argument determines which (data, or instruction, or both) TLB
+ * the mapping gets unmapped from.
+ *
+ * Attempting to perform an unmap operation for a previously defined
+ * permanent mapping will have undefined results.
+ */
+
+/* mmu_tsb_ctx0()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_TSB_CTX0
+ * ARG0:	number of TSB descriptions
+ * ARG1:	TSB descriptions pointer
+ * RET0:	status
+ * ERRORS:	ENORADDR		Invalid TSB descriptions pointer or
+ *					TSB base within a descriptor
+ *		EBADALIGN		TSB descriptions pointer is not aligned
+ *					to an 8-byte boundary, or TSB base
+ *					within a descriptor is not aligned for
+ *					the given TSB size
+ *		EBADPGSZ		Invalid page size in a TSB descriptor
+ *		EBADTSB			Invalid associativity or size in a TSB
+ *					descriptor
+ *		EINVAL			Invalid number of TSB descriptions, or
+ *					invalid context index in a TSB
+ *					descriptor, or index page size not
+ *					equal to smallest page size in page
+ *					size bitmask field.
+ *
+ * Configures the TSBs for the current CPU for virtual addresses with
+ * context zero.  The TSB descriptions pointer is a pointer to an
+ * array of the given number of TSB descriptions.
+ *
+ * Note: The maximum number of TSBs available to a virtual CPU is given by the
+ *       mmu-max-#tsbs property of the cpu's corresponding "cpu" node in the
+ *       machine description.
+ */
+#define HV_FAST_MMU_TSB_CTX0		0x20
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mmu_tsb_ctx0(unsigned long num_descriptions,
+					unsigned long tsb_desc_ra);
+#endif
+
+/* mmu_tsb_ctxnon0()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_TSB_CTXNON0
+ * ARG0:	number of TSB descriptions
+ * ARG1:	TSB descriptions pointer
+ * RET0:	status
+ * ERRORS:	Same as for mmu_tsb_ctx0() above.
+ *
+ * Configures the TSBs for the current CPU for virtual addresses with
+ * non-zero contexts.  The TSB descriptions pointer is a pointer to an
+ * array of the given number of TSB descriptions.
+ *
+ * Note: A maximum of 16 TSBs may be specified in the TSB description list.
+ */
+#define HV_FAST_MMU_TSB_CTXNON0		0x21
+
+/* mmu_demap_page()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_DEMAP_PAGE
+ * ARG0:	reserved, must be zero
+ * ARG1:	reserved, must be zero
+ * ARG2:	virtual address
+ * ARG3:	mmu context
+ * ARG4:	flags (HV_MMU_{IMMU,DMMU})
+ * RET0:	status
+ * ERRORS:	EINVAL			Invalid virutal address, context, or
+ *					flags value
+ *		ENOTSUPPORTED		ARG0 or ARG1 is non-zero
+ *
+ * Demaps any page mapping of the given virtual address in the given
+ * mmu context for the current virtual CPU.  Any virtually tagged
+ * caches are guaranteed to be kept consistent.  The flags argument
+ * determines which TLB (instruction, or data, or both) participate in
+ * the operation.
+ *
+ * ARG0 and ARG1 are both reserved and must be set to zero.
+ */
+#define HV_FAST_MMU_DEMAP_PAGE		0x22
+
+/* mmu_demap_ctx()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_DEMAP_CTX
+ * ARG0:	reserved, must be zero
+ * ARG1:	reserved, must be zero
+ * ARG2:	mmu context
+ * ARG3:	flags (HV_MMU_{IMMU,DMMU})
+ * RET0:	status
+ * ERRORS:	EINVAL			Invalid context or flags value
+ *		ENOTSUPPORTED		ARG0 or ARG1 is non-zero
+ *
+ * Demaps all non-permanent virtual page mappings previously specified
+ * for the given context for the current virtual CPU.  Any virtual
+ * tagged caches are guaranteed to be kept consistent.  The flags
+ * argument determines which TLB (instruction, or data, or both)
+ * participate in the operation.
+ *
+ * ARG0 and ARG1 are both reserved and must be set to zero.
+ */
+#define HV_FAST_MMU_DEMAP_CTX		0x23
+
+/* mmu_demap_all()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_DEMAP_ALL
+ * ARG0:	reserved, must be zero
+ * ARG1:	reserved, must be zero
+ * ARG2:	flags (HV_MMU_{IMMU,DMMU})
+ * RET0:	status
+ * ERRORS:	EINVAL			Invalid flags value
+ *		ENOTSUPPORTED		ARG0 or ARG1 is non-zero
+ *
+ * Demaps all non-permanent virtual page mappings previously specified
+ * for the current virtual CPU.  Any virtual tagged caches are
+ * guaranteed to be kept consistent.  The flags argument determines
+ * which TLB (instruction, or data, or both) participate in the
+ * operation.
+ *
+ * ARG0 and ARG1 are both reserved and must be set to zero.
+ */
+#define HV_FAST_MMU_DEMAP_ALL		0x24
+
+#ifndef __ASSEMBLY__
+extern void sun4v_mmu_demap_all(void);
+#endif
+
+/* mmu_map_perm_addr()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_MAP_PERM_ADDR
+ * ARG0:	virtual address
+ * ARG1:	reserved, must be zero
+ * ARG2:	TTE
+ * ARG3:	flags (HV_MMU_{IMMU,DMMU})
+ * RET0:	status
+ * ERRORS:	EINVAL			Invalid virutal address or flags value
+ *		EBADPGSZ		Invalid page size value
+ *		ENORADDR		Invalid real address in TTE
+ *		ETOOMANY		Too many mappings (max of 8 reached)
+ *
+ * Create a permanent mapping using the given TTE and virtual address
+ * for context 0 on the calling virtual CPU.  A maximum of 8 such
+ * permanent mappings may be specified by privileged code.  Mappings
+ * may be removed with mmu_unmap_perm_addr().
+ *
+ * The behavior is undefined if a TTE with the valid bit clear is given.
+ *
+ * Note: This call is used to specify address space mappings for which
+ *       privileged code does not expect to receive misses.  For example,
+ *       this mechanism can be used to map kernel nucleus code and data.
+ */
+#define HV_FAST_MMU_MAP_PERM_ADDR	0x25
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mmu_map_perm_addr(unsigned long vaddr,
+					     unsigned long set_to_zero,
+					     unsigned long tte,
+					     unsigned long flags);
+#endif
+
+/* mmu_fault_area_conf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_FAULT_AREA_CONF
+ * ARG0:	real address
+ * RET0:	status
+ * RET1:	previous mmu fault area real address
+ * ERRORS:	ENORADDR		Invalid real address
+ *		EBADALIGN		Invalid alignment for fault area
+ *
+ * Configure the MMU fault status area for the calling CPU.  A 64-byte
+ * aligned real address specifies where MMU fault status information
+ * is placed.  The return value is the previously specified area, or 0
+ * for the first invocation.  Specifying a fault area at real address
+ * 0 is not allowed.
+ */
+#define HV_FAST_MMU_FAULT_AREA_CONF	0x26
+
+/* mmu_enable()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_ENABLE
+ * ARG0:	enable flag
+ * ARG1:	return target address
+ * RET0:	status
+ * ERRORS:	ENORADDR		Invalid real address when disabling
+ *					translation.
+ *		EBADALIGN		The return target address is not
+ *					aligned to an instruction.
+ *		EINVAL			The enable flag request the current
+ *					operating mode (e.g. disable if already
+ *					disabled)
+ *
+ * Enable or disable virtual address translation for the calling CPU
+ * within the virtual machine domain.  If the enable flag is zero,
+ * translation is disabled, any non-zero value will enable
+ * translation.
+ *
+ * When this function returns, the newly selected translation mode
+ * will be active.  If the mmu is being enabled, then the return
+ * target address is a virtual address else it is a real address.
+ *
+ * Upon successful completion, control will be returned to the given
+ * return target address (ie. the cpu will jump to that address).  On
+ * failure, the previous mmu mode remains and the trap simply returns
+ * as normal with the appropriate error code in RET0.
+ */
+#define HV_FAST_MMU_ENABLE		0x27
+
+/* mmu_unmap_perm_addr()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_UNMAP_PERM_ADDR
+ * ARG0:	virtual address
+ * ARG1:	reserved, must be zero
+ * ARG2:	flags (HV_MMU_{IMMU,DMMU})
+ * RET0:	status
+ * ERRORS:	EINVAL			Invalid virutal address or flags value
+ *		ENOMAP			Specified mapping was not found
+ *
+ * Demaps any permanent page mapping (established via
+ * mmu_map_perm_addr()) at the given virtual address for context 0 on
+ * the current virtual CPU.  Any virtual tagged caches are guaranteed
+ * to be kept consistent.
+ */
+#define HV_FAST_MMU_UNMAP_PERM_ADDR	0x28
+
+/* mmu_tsb_ctx0_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_TSB_CTX0_INFO
+ * ARG0:	max TSBs
+ * ARG1:	buffer pointer
+ * RET0:	status
+ * RET1:	number of TSBs
+ * ERRORS:	EINVAL			Supplied buffer is too small
+ *		EBADALIGN		The buffer pointer is badly aligned
+ *		ENORADDR		Invalid real address for buffer pointer
+ *
+ * Return the TSB configuration as previous defined by mmu_tsb_ctx0()
+ * into the provided buffer.  The size of the buffer is given in ARG1
+ * in terms of the number of TSB description entries.
+ *
+ * Upon return, RET1 always contains the number of TSB descriptions
+ * previously configured.  If zero TSBs were configured, EOK is
+ * returned with RET1 containing 0.
+ */
+#define HV_FAST_MMU_TSB_CTX0_INFO	0x29
+
+/* mmu_tsb_ctxnon0_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_TSB_CTXNON0_INFO
+ * ARG0:	max TSBs
+ * ARG1:	buffer pointer
+ * RET0:	status
+ * RET1:	number of TSBs
+ * ERRORS:	EINVAL			Supplied buffer is too small
+ *		EBADALIGN		The buffer pointer is badly aligned
+ *		ENORADDR		Invalid real address for buffer pointer
+ *
+ * Return the TSB configuration as previous defined by
+ * mmu_tsb_ctxnon0() into the provided buffer.  The size of the buffer
+ * is given in ARG1 in terms of the number of TSB description entries.
+ *
+ * Upon return, RET1 always contains the number of TSB descriptions
+ * previously configured.  If zero TSBs were configured, EOK is
+ * returned with RET1 containing 0.
+ */
+#define HV_FAST_MMU_TSB_CTXNON0_INFO	0x2a
+
+/* mmu_fault_area_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMU_FAULT_AREA_INFO
+ * RET0:	status
+ * RET1:	fault area real address
+ * ERRORS:	No errors defined.
+ *
+ * Return the currently defined MMU fault status area for the current
+ * CPU.  The real address of the fault status area is returned in
+ * RET1, or 0 is returned in RET1 if no fault status area is defined.
+ *
+ * Note: mmu_fault_area_conf() may be called with the return value (RET1)
+ *       from this service if there is a need to save and restore the fault
+ *	 area for a cpu.
+ */
+#define HV_FAST_MMU_FAULT_AREA_INFO	0x2b
+
+/* Cache and Memory services. */
+
+/* mem_scrub()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MEM_SCRUB
+ * ARG0:	real address
+ * ARG1:	length
+ * RET0:	status
+ * RET1:	length scrubbed
+ * ERRORS:	ENORADDR	Invalid real address
+ *		EBADALIGN	Start address or length are not correctly
+ *				aligned
+ *		EINVAL		Length is zero
+ *
+ * Zero the memory contents in the range real address to real address
+ * plus length minus 1.  Also, valid ECC will be generated for that
+ * memory address range.  Scrubbing is started at the given real
+ * address, but may not scrub the entire given length.  The actual
+ * length scrubbed will be returned in RET1.
+ *
+ * The real address and length must be aligned on an 8K boundary, or
+ * contain the start address and length from a sun4v error report.
+ *
+ * Note: There are two uses for this function.  The first use is to block clear
+ *       and initialize memory and the second is to scrub an u ncorrectable
+ *       error reported via a resumable or non-resumable trap.  The second
+ *       use requires the arguments to be equal to the real address and length
+ *       provided in a sun4v memory error report.
+ */
+#define HV_FAST_MEM_SCRUB		0x31
+
+/* mem_sync()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MEM_SYNC
+ * ARG0:	real address
+ * ARG1:	length
+ * RET0:	status
+ * RET1:	length synced
+ * ERRORS:	ENORADDR	Invalid real address
+ *		EBADALIGN	Start address or length are not correctly
+ *				aligned
+ *		EINVAL		Length is zero
+ *
+ * Force the next access within the real address to real address plus
+ * length minus 1 to be fetches from main system memory.  Less than
+ * the given length may be synced, the actual amount synced is
+ * returned in RET1.  The real address and length must be aligned on
+ * an 8K boundary.
+ */
+#define HV_FAST_MEM_SYNC		0x32
+
+/* Time of day services.
+ *
+ * The hypervisor maintains the time of day on a per-domain basis.
+ * Changing the time of day in one domain does not affect the time of
+ * day on any other domain.
+ *
+ * Time is described by a single unsigned 64-bit word which is the
+ * number of seconds since the UNIX Epoch (00:00:00 UTC, January 1,
+ * 1970).
+ */
+
+/* tod_get()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TOD_GET
+ * RET0:	status
+ * RET1:	TOD
+ * ERRORS:	EWOULDBLOCK	TOD resource is temporarily unavailable
+ *		ENOTSUPPORTED	If TOD not supported on this platform
+ *
+ * Return the current time of day.  May block if TOD access is
+ * temporarily not possible.
+ */
+#define HV_FAST_TOD_GET			0x50
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_tod_get(unsigned long *time);
+#endif
+
+/* tod_set()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TOD_SET
+ * ARG0:	TOD
+ * RET0:	status
+ * ERRORS:	EWOULDBLOCK	TOD resource is temporarily unavailable
+ *		ENOTSUPPORTED	If TOD not supported on this platform
+ *
+ * The current time of day is set to the value specified in ARG0.  May
+ * block if TOD access is temporarily not possible.
+ */
+#define HV_FAST_TOD_SET			0x51
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_tod_set(unsigned long time);
+#endif
+
+/* Console services */
+
+/* con_getchar()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CONS_GETCHAR
+ * RET0:	status
+ * RET1:	character
+ * ERRORS:	EWOULDBLOCK	No character available.
+ *
+ * Returns a character from the console device.  If no character is
+ * available then an EWOULDBLOCK error is returned.  If a character is
+ * available, then the returned status is EOK and the character value
+ * is in RET1.
+ *
+ * A virtual BREAK is represented by the 64-bit value -1.
+ *
+ * A virtual HUP signal is represented by the 64-bit value -2.
+ */
+#define HV_FAST_CONS_GETCHAR		0x60
+
+/* con_putchar()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CONS_PUTCHAR
+ * ARG0:	character
+ * RET0:	status
+ * ERRORS:	EINVAL		Illegal character
+ *		EWOULDBLOCK	Output buffer currently full, would block
+ *
+ * Send a character to the console device.  Only character values
+ * between 0 and 255 may be used.  Values outside this range are
+ * invalid except for the 64-bit value -1 which is used to send a
+ * virtual BREAK.
+ */
+#define HV_FAST_CONS_PUTCHAR		0x61
+
+/* con_read()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CONS_READ
+ * ARG0:	buffer real address
+ * ARG1:	buffer size in bytes
+ * RET0:	status
+ * RET1:	bytes read or BREAK or HUP
+ * ERRORS:	EWOULDBLOCK	No character available.
+ *
+ * Reads characters into a buffer from the console device.  If no
+ * character is available then an EWOULDBLOCK error is returned.
+ * If a character is available, then the returned status is EOK
+ * and the number of bytes read into the given buffer is provided
+ * in RET1.
+ *
+ * A virtual BREAK is represented by the 64-bit RET1 value -1.
+ *
+ * A virtual HUP signal is represented by the 64-bit RET1 value -2.
+ *
+ * If BREAK or HUP are indicated, no bytes were read into buffer.
+ */
+#define HV_FAST_CONS_READ		0x62
+
+/* con_write()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_CONS_WRITE
+ * ARG0:	buffer real address
+ * ARG1:	buffer size in bytes
+ * RET0:	status
+ * RET1:	bytes written
+ * ERRORS:	EWOULDBLOCK	Output buffer currently full, would block
+ *
+ * Send a characters in buffer to the console device.  Breaks must be
+ * sent using con_putchar().
+ */
+#define HV_FAST_CONS_WRITE		0x63
+
+#ifndef __ASSEMBLY__
+extern long sun4v_con_getchar(long *status);
+extern long sun4v_con_putchar(long c);
+extern long sun4v_con_read(unsigned long buffer,
+			   unsigned long size,
+			   unsigned long *bytes_read);
+extern unsigned long sun4v_con_write(unsigned long buffer,
+				     unsigned long size,
+				     unsigned long *bytes_written);
+#endif
+
+/* mach_set_soft_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_SET_SOFT_STATE
+ * ARG0:	software state
+ * ARG1:	software state description pointer
+ * RET0:	status
+ * ERRORS:	EINVAL		software state not valid or software state
+ *				description is not NULL terminated
+ *		ENORADDR	software state description pointer is not a
+ *				valid real address
+ *		EBADALIGNED	software state description is not correctly
+ *				aligned
+ *
+ * This allows the guest to report it's soft state to the hypervisor.  There
+ * are two primary components to this state.  The first part states whether
+ * the guest software is running or not.  The second containts optional
+ * details specific to the software.
+ *
+ * The software state argument is defined below in HV_SOFT_STATE_*, and
+ * indicates whether the guest is operating normally or in a transitional
+ * state.
+ *
+ * The software state description argument is a real address of a data buffer
+ * of size 32-bytes aligned on a 32-byte boundary.  It is treated as a NULL
+ * terminated 7-bit ASCII string of up to 31 characters not including the
+ * NULL termination.
+ */
+#define HV_FAST_MACH_SET_SOFT_STATE	0x70
+#define  HV_SOFT_STATE_NORMAL		 0x01
+#define  HV_SOFT_STATE_TRANSITION	 0x02
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mach_set_soft_state(unsigned long soft_state,
+					       unsigned long msg_string_ra);
+#endif
+
+/* mach_get_soft_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MACH_GET_SOFT_STATE
+ * ARG0:	software state description pointer
+ * RET0:	status
+ * RET1:	software state
+ * ERRORS:	ENORADDR	software state description pointer is not a
+ *				valid real address
+ *		EBADALIGNED	software state description is not correctly
+ *				aligned
+ *
+ * Retrieve the current value of the guest's software state.  The rules
+ * for the software state pointer are the same as for mach_set_soft_state()
+ * above.
+ */
+#define HV_FAST_MACH_GET_SOFT_STATE	0x71
+
+/* svc_send()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SVC_SEND
+ * ARG0:	service ID
+ * ARG1:	buffer real address
+ * ARG2:	buffer size
+ * RET0:	STATUS
+ * RET1:	sent_bytes
+ *
+ * Be careful, all output registers are clobbered by this operation,
+ * so for example it is not possible to save away a value in %o4
+ * across the trap.
+ */
+#define HV_FAST_SVC_SEND		0x80
+
+/* svc_recv()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SVC_RECV
+ * ARG0:	service ID
+ * ARG1:	buffer real address
+ * ARG2:	buffer size
+ * RET0:	STATUS
+ * RET1:	recv_bytes
+ *
+ * Be careful, all output registers are clobbered by this operation,
+ * so for example it is not possible to save away a value in %o4
+ * across the trap.
+ */
+#define HV_FAST_SVC_RECV		0x81
+
+/* svc_getstatus()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SVC_GETSTATUS
+ * ARG0:	service ID
+ * RET0:	STATUS
+ * RET1:	status bits
+ */
+#define HV_FAST_SVC_GETSTATUS		0x82
+
+/* svc_setstatus()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SVC_SETSTATUS
+ * ARG0:	service ID
+ * ARG1:	bits to set
+ * RET0:	STATUS
+ */
+#define HV_FAST_SVC_SETSTATUS		0x83
+
+/* svc_clrstatus()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SVC_CLRSTATUS
+ * ARG0:	service ID
+ * ARG1:	bits to clear
+ * RET0:	STATUS
+ */
+#define HV_FAST_SVC_CLRSTATUS		0x84
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_svc_send(unsigned long svc_id,
+				    unsigned long buffer,
+				    unsigned long buffer_size,
+				    unsigned long *sent_bytes);
+extern unsigned long sun4v_svc_recv(unsigned long svc_id,
+				    unsigned long buffer,
+				    unsigned long buffer_size,
+				    unsigned long *recv_bytes);
+extern unsigned long sun4v_svc_getstatus(unsigned long svc_id,
+					 unsigned long *status_bits);
+extern unsigned long sun4v_svc_setstatus(unsigned long svc_id,
+					 unsigned long status_bits);
+extern unsigned long sun4v_svc_clrstatus(unsigned long svc_id,
+					 unsigned long status_bits);
+#endif
+
+/* Trap trace services.
+ *
+ * The hypervisor provides a trap tracing capability for privileged
+ * code running on each virtual CPU.  Privileged code provides a
+ * round-robin trap trace queue within which the hypervisor writes
+ * 64-byte entries detailing hyperprivileged traps taken n behalf of
+ * privileged code.  This is provided as a debugging capability for
+ * privileged code.
+ *
+ * The trap trace control structure is 64-bytes long and placed at the
+ * start (offset 0) of the trap trace buffer, and is described as
+ * follows:
+ */
+#ifndef __ASSEMBLY__
+struct hv_trap_trace_control {
+	unsigned long		head_offset;
+	unsigned long		tail_offset;
+	unsigned long		__reserved[0x30 / sizeof(unsigned long)];
+};
+#endif
+#define HV_TRAP_TRACE_CTRL_HEAD_OFFSET	0x00
+#define HV_TRAP_TRACE_CTRL_TAIL_OFFSET	0x08
+
+/* The head offset is the offset of the most recently completed entry
+ * in the trap-trace buffer.  The tail offset is the offset of the
+ * next entry to be written.  The control structure is owned and
+ * modified by the hypervisor.  A guest may not modify the control
+ * structure contents.  Attempts to do so will result in undefined
+ * behavior for the guest.
+ *
+ * Each trap trace buffer entry is layed out as follows:
+ */
+#ifndef __ASSEMBLY__
+struct hv_trap_trace_entry {
+	unsigned char	type;		/* Hypervisor or guest entry?	*/
+	unsigned char	hpstate;	/* Hyper-privileged state	*/
+	unsigned char	tl;		/* Trap level			*/
+	unsigned char	gl;		/* Global register level	*/
+	unsigned short	tt;		/* Trap type			*/
+	unsigned short	tag;		/* Extended trap identifier	*/
+	unsigned long	tstate;		/* Trap state			*/
+	unsigned long	tick;		/* Tick				*/
+	unsigned long	tpc;		/* Trap PC			*/
+	unsigned long	f1;		/* Entry specific		*/
+	unsigned long	f2;		/* Entry specific		*/
+	unsigned long	f3;		/* Entry specific		*/
+	unsigned long	f4;		/* Entry specific		*/
+};
+#endif
+#define HV_TRAP_TRACE_ENTRY_TYPE	0x00
+#define HV_TRAP_TRACE_ENTRY_HPSTATE	0x01
+#define HV_TRAP_TRACE_ENTRY_TL		0x02
+#define HV_TRAP_TRACE_ENTRY_GL		0x03
+#define HV_TRAP_TRACE_ENTRY_TT		0x04
+#define HV_TRAP_TRACE_ENTRY_TAG		0x06
+#define HV_TRAP_TRACE_ENTRY_TSTATE	0x08
+#define HV_TRAP_TRACE_ENTRY_TICK	0x10
+#define HV_TRAP_TRACE_ENTRY_TPC		0x18
+#define HV_TRAP_TRACE_ENTRY_F1		0x20
+#define HV_TRAP_TRACE_ENTRY_F2		0x28
+#define HV_TRAP_TRACE_ENTRY_F3		0x30
+#define HV_TRAP_TRACE_ENTRY_F4		0x38
+
+/* The type field is encoded as follows.  */
+#define HV_TRAP_TYPE_UNDEF		0x00 /* Entry content undefined     */
+#define HV_TRAP_TYPE_HV			0x01 /* Hypervisor trap entry       */
+#define HV_TRAP_TYPE_GUEST		0xff /* Added via ttrace_addentry() */
+
+/* ttrace_buf_conf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TTRACE_BUF_CONF
+ * ARG0:	real address
+ * ARG1:	number of entries
+ * RET0:	status
+ * RET1:	number of entries
+ * ERRORS:	ENORADDR	Invalid real address
+ *		EINVAL		Size is too small
+ *		EBADALIGN	Real address not aligned on 64-byte boundary
+ *
+ * Requests hypervisor trap tracing and declares a virtual CPU's trap
+ * trace buffer to the hypervisor.  The real address supplies the real
+ * base address of the trap trace queue and must be 64-byte aligned.
+ * Specifying a value of 0 for the number of entries disables trap
+ * tracing for the calling virtual CPU.  The buffer allocated must be
+ * sized for a power of two number of 64-byte trap trace entries plus
+ * an initial 64-byte control structure.
+ *
+ * This may be invoked any number of times so that a virtual CPU may
+ * relocate a trap trace buffer or create "snapshots" of information.
+ *
+ * If the real address is illegal or badly aligned, then trap tracing
+ * is disabled and an error is returned.
+ *
+ * Upon failure with EINVAL, this service call returns in RET1 the
+ * minimum number of buffer entries required.  Upon other failures
+ * RET1 is undefined.
+ */
+#define HV_FAST_TTRACE_BUF_CONF		0x90
+
+/* ttrace_buf_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TTRACE_BUF_INFO
+ * RET0:	status
+ * RET1:	real address
+ * RET2:	size
+ * ERRORS:	None defined.
+ *
+ * Returns the size and location of the previously declared trap-trace
+ * buffer.  In the event that no buffer was previously defined, or the
+ * buffer is disabled, this call will return a size of zero bytes.
+ */
+#define HV_FAST_TTRACE_BUF_INFO		0x91
+
+/* ttrace_enable()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TTRACE_ENABLE
+ * ARG0:	enable
+ * RET0:	status
+ * RET1:	previous enable state
+ * ERRORS:	EINVAL		No trap trace buffer currently defined
+ *
+ * Enable or disable trap tracing, and return the previous enabled
+ * state in RET1.  Future systems may define various flags for the
+ * enable argument (ARG0), for the moment a guest should pass
+ * "(uint64_t) -1" to enable, and "(uint64_t) 0" to disable all
+ * tracing - which will ensure future compatability.
+ */
+#define HV_FAST_TTRACE_ENABLE		0x92
+
+/* ttrace_freeze()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_TTRACE_FREEZE
+ * ARG0:	freeze
+ * RET0:	status
+ * RET1:	previous freeze state
+ * ERRORS:	EINVAL		No trap trace buffer currently defined
+ *
+ * Freeze or unfreeze trap tracing, returning the previous freeze
+ * state in RET1.  A guest should pass a non-zero value to freeze and
+ * a zero value to unfreeze all tracing.  The returned previous state
+ * is 0 for not frozen and 1 for frozen.
+ */
+#define HV_FAST_TTRACE_FREEZE		0x93
+
+/* ttrace_addentry()
+ * TRAP:	HV_TTRACE_ADDENTRY_TRAP
+ * ARG0:	tag (16-bits)
+ * ARG1:	data word 0
+ * ARG2:	data word 1
+ * ARG3:	data word 2
+ * ARG4:	data word 3
+ * RET0:	status
+ * ERRORS:	EINVAL		No trap trace buffer currently defined
+ *
+ * Add an entry to the trap trace buffer.  Upon return only ARG0/RET0
+ * is modified - none of the other registers holding arguments are
+ * volatile across this hypervisor service.
+ */
+
+/* Core dump services.
+ *
+ * Since the hypervisor viraulizes and thus obscures a lot of the
+ * physical machine layout and state, traditional OS crash dumps can
+ * be difficult to diagnose especially when the problem is a
+ * configuration error of some sort.
+ *
+ * The dump services provide an opaque buffer into which the
+ * hypervisor can place it's internal state in order to assist in
+ * debugging such situations.  The contents are opaque and extremely
+ * platform and hypervisor implementation specific.  The guest, during
+ * a core dump, requests that the hypervisor update any information in
+ * the dump buffer in preparation to being dumped as part of the
+ * domain's memory image.
+ */
+
+/* dump_buf_update()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_DUMP_BUF_UPDATE
+ * ARG0:	real address
+ * ARG1:	size
+ * RET0:	status
+ * RET1:	required size of dump buffer
+ * ERRORS:	ENORADDR	Invalid real address
+ *		EBADALIGN	Real address is not aligned on a 64-byte
+ *				boundary
+ *		EINVAL		Size is non-zero but less than minimum size
+ *				required
+ *		ENOTSUPPORTED	Operation not supported on current logical
+ *				domain
+ *
+ * Declare a domain dump buffer to the hypervisor.  The real address
+ * provided for the domain dump buffer must be 64-byte aligned.  The
+ * size specifies the size of the dump buffer and may be larger than
+ * the minimum size specified in the machine description.  The
+ * hypervisor will fill the dump buffer with opaque data.
+ *
+ * Note: A guest may elect to include dump buffer contents as part of a crash
+ *       dump to assist with debugging.  This function may be called any number
+ *       of times so that a guest may relocate a dump buffer, or create
+ *       "snapshots" of any dump-buffer information.  Each call to
+ *       dump_buf_update() atomically declares the new dump buffer to the
+ *       hypervisor.
+ *
+ * A specified size of 0 unconfigures the dump buffer.  If the real
+ * address is illegal or badly aligned, then any currently active dump
+ * buffer is disabled and an error is returned.
+ *
+ * In the event that the call fails with EINVAL, RET1 contains the
+ * minimum size requires by the hypervisor for a valid dump buffer.
+ */
+#define HV_FAST_DUMP_BUF_UPDATE		0x94
+
+/* dump_buf_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_DUMP_BUF_INFO
+ * RET0:	status
+ * RET1:	real address of current dump buffer
+ * RET2:	size of current dump buffer
+ * ERRORS:	No errors defined.
+ *
+ * Return the currently configures dump buffer description.  A
+ * returned size of 0 bytes indicates an undefined dump buffer.  In
+ * this case the return address in RET1 is undefined.
+ */
+#define HV_FAST_DUMP_BUF_INFO		0x95
+
+/* Device interrupt services.
+ *
+ * Device interrupts are allocated to system bus bridges by the hypervisor,
+ * and described to OBP in the machine description.  OBP then describes
+ * these interrupts to the OS via properties in the device tree.
+ *
+ * Terminology:
+ *
+ *	cpuid		Unique opaque value which represents a target cpu.
+ *
+ *	devhandle	Device handle.  It uniquely identifies a device, and
+ *			consistes of the lower 28-bits of the hi-cell of the
+ *			first entry of the device's "reg" property in the
+ *			OBP device tree.
+ *
+ *	devino		Device interrupt number.  Specifies the relative
+ *			interrupt number within the device.  The unique
+ *			combination of devhandle and devino are used to
+ *			identify a specific device interrupt.
+ *
+ *			Note: The devino value is the same as the values in the
+ *			      "interrupts" property or "interrupt-map" property
+ *			      in the OBP device tree for that device.
+ *
+ *	sysino		System interrupt number.  A 64-bit unsigned interger
+ *			representing a unique interrupt within a virtual
+ *			machine.
+ *
+ *	intr_state	A flag representing the interrupt state for a given
+ *			sysino.  The state values are defined below.
+ *
+ *	intr_enabled	A flag representing the 'enabled' state for a given
+ *			sysino.  The enable values are defined below.
+ */
+
+#define HV_INTR_STATE_IDLE		0 /* Nothing pending */
+#define HV_INTR_STATE_RECEIVED		1 /* Interrupt received by hardware */
+#define HV_INTR_STATE_DELIVERED		2 /* Interrupt delivered to queue */
+
+#define HV_INTR_DISABLED		0 /* sysino not enabled */
+#define HV_INTR_ENABLED			1 /* sysino enabled */
+
+/* intr_devino_to_sysino()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_DEVINO2SYSINO
+ * ARG0:	devhandle
+ * ARG1:	devino
+ * RET0:	status
+ * RET1:	sysino
+ * ERRORS:	EINVAL		Invalid devhandle/devino
+ *
+ * Converts a device specific interrupt number of the given
+ * devhandle/devino into a system specific ino (sysino).
+ */
+#define HV_FAST_INTR_DEVINO2SYSINO	0xa0
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_devino_to_sysino(unsigned long devhandle,
+					    unsigned long devino);
+#endif
+
+/* intr_getenabled()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_GETENABLED
+ * ARG0:	sysino
+ * RET0:	status
+ * RET1:	intr_enabled (HV_INTR_{DISABLED,ENABLED})
+ * ERRORS:	EINVAL		Invalid sysino
+ *
+ * Returns interrupt enabled state in RET1 for the interrupt defined
+ * by the given sysino.
+ */
+#define HV_FAST_INTR_GETENABLED		0xa1
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_getenabled(unsigned long sysino);
+#endif
+
+/* intr_setenabled()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_SETENABLED
+ * ARG0:	sysino
+ * ARG1:	intr_enabled (HV_INTR_{DISABLED,ENABLED})
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid sysino or intr_enabled value
+ *
+ * Set the 'enabled' state of the interrupt sysino.
+ */
+#define HV_FAST_INTR_SETENABLED		0xa2
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_setenabled(unsigned long sysino, unsigned long intr_enabled);
+#endif
+
+/* intr_getstate()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_GETSTATE
+ * ARG0:	sysino
+ * RET0:	status
+ * RET1:	intr_state (HV_INTR_STATE_*)
+ * ERRORS:	EINVAL		Invalid sysino
+ *
+ * Returns current state of the interrupt defined by the given sysino.
+ */
+#define HV_FAST_INTR_GETSTATE		0xa3
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_getstate(unsigned long sysino);
+#endif
+
+/* intr_setstate()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_SETSTATE
+ * ARG0:	sysino
+ * ARG1:	intr_state (HV_INTR_STATE_*)
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid sysino or intr_state value
+ *
+ * Sets the current state of the interrupt described by the given sysino
+ * value.
+ *
+ * Note: Setting the state to HV_INTR_STATE_IDLE clears any pending
+ *       interrupt for sysino.
+ */
+#define HV_FAST_INTR_SETSTATE		0xa4
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_setstate(unsigned long sysino, unsigned long intr_state);
+#endif
+
+/* intr_gettarget()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_GETTARGET
+ * ARG0:	sysino
+ * RET0:	status
+ * RET1:	cpuid
+ * ERRORS:	EINVAL		Invalid sysino
+ *
+ * Returns CPU that is the current target of the interrupt defined by
+ * the given sysino.  The CPU value returned is undefined if the target
+ * has not been set via intr_settarget().
+ */
+#define HV_FAST_INTR_GETTARGET		0xa5
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_gettarget(unsigned long sysino);
+#endif
+
+/* intr_settarget()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_INTR_SETTARGET
+ * ARG0:	sysino
+ * ARG1:	cpuid
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid sysino
+ *		ENOCPU		Invalid cpuid
+ *
+ * Set the target CPU for the interrupt defined by the given sysino.
+ */
+#define HV_FAST_INTR_SETTARGET		0xa6
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_intr_settarget(unsigned long sysino, unsigned long cpuid);
+#endif
+
+/* vintr_get_cookie()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_GET_COOKIE
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * RET0:	status
+ * RET1:	cookie
+ */
+#define HV_FAST_VINTR_GET_COOKIE	0xa7
+
+/* vintr_set_cookie()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_SET_COOKIE
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * ARG2:	cookie
+ * RET0:	status
+ */
+#define HV_FAST_VINTR_SET_COOKIE	0xa8
+
+/* vintr_get_valid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_GET_VALID
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * RET0:	status
+ * RET1:	valid state
+ */
+#define HV_FAST_VINTR_GET_VALID		0xa9
+
+/* vintr_set_valid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_SET_VALID
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * ARG2:	valid state
+ * RET0:	status
+ */
+#define HV_FAST_VINTR_SET_VALID		0xaa
+
+/* vintr_get_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_GET_STATE
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * RET0:	status
+ * RET1:	state
+ */
+#define HV_FAST_VINTR_GET_STATE		0xab
+
+/* vintr_set_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_SET_STATE
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * ARG2:	state
+ * RET0:	status
+ */
+#define HV_FAST_VINTR_SET_STATE		0xac
+
+/* vintr_get_target()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_GET_TARGET
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * RET0:	status
+ * RET1:	cpuid
+ */
+#define HV_FAST_VINTR_GET_TARGET	0xad
+
+/* vintr_set_target()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_VINTR_SET_TARGET
+ * ARG0:	device handle
+ * ARG1:	device ino
+ * ARG2:	cpuid
+ * RET0:	status
+ */
+#define HV_FAST_VINTR_SET_TARGET	0xae
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_vintr_get_cookie(unsigned long dev_handle,
+					    unsigned long dev_ino,
+					    unsigned long *cookie);
+extern unsigned long sun4v_vintr_set_cookie(unsigned long dev_handle,
+					    unsigned long dev_ino,
+					    unsigned long cookie);
+extern unsigned long sun4v_vintr_get_valid(unsigned long dev_handle,
+					   unsigned long dev_ino,
+					   unsigned long *valid);
+extern unsigned long sun4v_vintr_set_valid(unsigned long dev_handle,
+					   unsigned long dev_ino,
+					   unsigned long valid);
+extern unsigned long sun4v_vintr_get_state(unsigned long dev_handle,
+					   unsigned long dev_ino,
+					   unsigned long *state);
+extern unsigned long sun4v_vintr_set_state(unsigned long dev_handle,
+					   unsigned long dev_ino,
+					   unsigned long state);
+extern unsigned long sun4v_vintr_get_target(unsigned long dev_handle,
+					    unsigned long dev_ino,
+					    unsigned long *cpuid);
+extern unsigned long sun4v_vintr_set_target(unsigned long dev_handle,
+					    unsigned long dev_ino,
+					    unsigned long cpuid);
+#endif
+
+/* PCI IO services.
+ *
+ * See the terminology descriptions in the device interrupt services
+ * section above as those apply here too.  Here are terminology
+ * definitions specific to these PCI IO services:
+ *
+ *	tsbnum		TSB number.  Indentifies which io-tsb is used.
+ *			For this version of the specification, tsbnum
+ *			must be zero.
+ *
+ *	tsbindex	TSB index.  Identifies which entry in the TSB
+ *			is used.  The first entry is zero.
+ *
+ *	tsbid		A 64-bit aligned data structure which contains
+ *			a tsbnum and a tsbindex.  Bits 63:32 contain the
+ *			tsbnum and bits 31:00 contain the tsbindex.
+ *
+ *			Use the HV_PCI_TSBID() macro to construct such
+ * 			values.
+ *
+ *	io_attributes	IO attributes for IOMMU mappings.  One of more
+ *			of the attritbute bits are stores in a 64-bit
+ *			value.  The values are defined below.
+ *
+ *	r_addr		64-bit real address
+ *
+ *	pci_device	PCI device address.  A PCI device address identifies
+ *			a specific device on a specific PCI bus segment.
+ *			A PCI device address ia a 32-bit unsigned integer
+ *			with the following format:
+ *
+ *				00000000.bbbbbbbb.dddddfff.00000000
+ *
+ *			Use the HV_PCI_DEVICE_BUILD() macro to construct
+ *			such values.
+ *
+ *	pci_config_offset
+ *			PCI configureation space offset.  For conventional
+ *			PCI a value between 0 and 255.  For extended
+ *			configuration space, a value between 0 and 4095.
+ *
+ *			Note: For PCI configuration space accesses, the offset
+ *			      must be aligned to the access size.
+ *
+ *	error_flag	A return value which specifies if the action succeeded
+ *			or failed.  0 means no error, non-0 means some error
+ *			occurred while performing the service.
+ *
+ *	io_sync_direction
+ *			Direction definition for pci_dma_sync(), defined
+ *			below in HV_PCI_SYNC_*.
+ *
+ *	io_page_list	A list of io_page_addresses, an io_page_address is
+ *			a real address.
+ *
+ *	io_page_list_p	A pointer to an io_page_list.
+ *
+ *	"size based byte swap" - Some functions do size based byte swapping
+ *				 which allows sw to access pointers and
+ *				 counters in native form when the processor
+ *				 operates in a different endianness than the
+ *				 IO bus.  Size-based byte swapping converts a
+ *				 multi-byte field between big-endian and
+ *				 little-endian format.
+ */
+
+#define HV_PCI_MAP_ATTR_READ		0x01
+#define HV_PCI_MAP_ATTR_WRITE		0x02
+
+#define HV_PCI_DEVICE_BUILD(b,d,f)	\
+	((((b) & 0xff) << 16) | \
+	 (((d) & 0x1f) << 11) | \
+	 (((f) & 0x07) <<  8))
+
+#define HV_PCI_TSBID(__tsb_num, __tsb_index) \
+	((((u64)(__tsb_num)) << 32UL) | ((u64)(__tsb_index)))
+
+#define HV_PCI_SYNC_FOR_DEVICE		0x01
+#define HV_PCI_SYNC_FOR_CPU		0x02
+
+/* pci_iommu_map()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_IOMMU_MAP
+ * ARG0:	devhandle
+ * ARG1:	tsbid
+ * ARG2:	#ttes
+ * ARG3:	io_attributes
+ * ARG4:	io_page_list_p
+ * RET0:	status
+ * RET1:	#ttes mapped
+ * ERRORS:	EINVAL		Invalid devhandle/tsbnum/tsbindex/io_attributes
+ *		EBADALIGN	Improperly aligned real address
+ *		ENORADDR	Invalid real address
+ *
+ * Create IOMMU mappings in the sun4v device defined by the given
+ * devhandle.  The mappings are created in the TSB defined by the
+ * tsbnum component of the given tsbid.  The first mapping is created
+ * in the TSB i ndex defined by the tsbindex component of the given tsbid.
+ * The call creates up to #ttes mappings, the first one at tsbnum, tsbindex,
+ * the second at tsbnum, tsbindex + 1, etc.
+ *
+ * All mappings are created with the attributes defined by the io_attributes
+ * argument.  The page mapping addresses are described in the io_page_list
+ * defined by the given io_page_list_p, which is a pointer to the io_page_list.
+ * The first entry in the io_page_list is the address for the first iotte, the
+ * 2nd for the 2nd iotte, and so on.
+ *
+ * Each io_page_address in the io_page_list must be appropriately aligned.
+ * #ttes must be greater than zero.  For this version of the spec, the tsbnum
+ * component of the given tsbid must be zero.
+ *
+ * Returns the actual number of mappings creates, which may be less than
+ * or equal to the argument #ttes.  If the function returns a value which
+ * is less than the #ttes, the caller may continus to call the function with
+ * an updated tsbid, #ttes, io_page_list_p arguments until all pages are
+ * mapped.
+ *
+ * Note: This function does not imply an iotte cache flush.  The guest must
+ *       demap an entry before re-mapping it.
+ */
+#define HV_FAST_PCI_IOMMU_MAP		0xb0
+
+/* pci_iommu_demap()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_IOMMU_DEMAP
+ * ARG0:	devhandle
+ * ARG1:	tsbid
+ * ARG2:	#ttes
+ * RET0:	status
+ * RET1:	#ttes demapped
+ * ERRORS:	EINVAL		Invalid devhandle/tsbnum/tsbindex
+ *
+ * Demap and flush IOMMU mappings in the device defined by the given
+ * devhandle.  Demaps up to #ttes entries in the TSB defined by the tsbnum
+ * component of the given tsbid, starting at the TSB index defined by the
+ * tsbindex component of the given tsbid.
+ *
+ * For this version of the spec, the tsbnum of the given tsbid must be zero.
+ * #ttes must be greater than zero.
+ *
+ * Returns the actual number of ttes demapped, which may be less than or equal
+ * to the argument #ttes.  If #ttes demapped is less than #ttes, the caller
+ * may continue to call this function with updated tsbid and #ttes arguments
+ * until all pages are demapped.
+ *
+ * Note: Entries do not have to be mapped to be demapped.  A demap of an
+ *       unmapped page will flush the entry from the tte cache.
+ */
+#define HV_FAST_PCI_IOMMU_DEMAP		0xb1
+
+/* pci_iommu_getmap()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_IOMMU_GETMAP
+ * ARG0:	devhandle
+ * ARG1:	tsbid
+ * RET0:	status
+ * RET1:	io_attributes
+ * RET2:	real address
+ * ERRORS:	EINVAL		Invalid devhandle/tsbnum/tsbindex
+ *		ENOMAP		Mapping is not valid, no translation exists
+ *
+ * Read and return the mapping in the device described by the given devhandle
+ * and tsbid.  If successful, the io_attributes shall be returned in RET1
+ * and the page address of the mapping shall be returned in RET2.
+ *
+ * For this version of the spec, the tsbnum component of the given tsbid
+ * must be zero.
+ */
+#define HV_FAST_PCI_IOMMU_GETMAP	0xb2
+
+/* pci_iommu_getbypass()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_IOMMU_GETBYPASS
+ * ARG0:	devhandle
+ * ARG1:	real address
+ * ARG2:	io_attributes
+ * RET0:	status
+ * RET1:	io_addr
+ * ERRORS:	EINVAL		Invalid devhandle/io_attributes
+ *		ENORADDR	Invalid real address
+ *		ENOTSUPPORTED	Function not supported in this implementation.
+ *
+ * Create a "special" mapping in the device described by the given devhandle,
+ * for the given real address and attributes.  Return the IO address in RET1
+ * if successful.
+ */
+#define HV_FAST_PCI_IOMMU_GETBYPASS	0xb3
+
+/* pci_config_get()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_CONFIG_GET
+ * ARG0:	devhandle
+ * ARG1:	pci_device
+ * ARG2:	pci_config_offset
+ * ARG3:	size
+ * RET0:	status
+ * RET1:	error_flag
+ * RET2:	data
+ * ERRORS:	EINVAL		Invalid devhandle/pci_device/offset/size
+ *		EBADALIGN	pci_config_offset not size aligned
+ *		ENOACCESS	Access to this offset is not permitted
+ *
+ * Read PCI configuration space for the adapter described by the given
+ * devhandle.  Read size (1, 2, or 4) bytes of data from the given
+ * pci_device, at pci_config_offset from the beginning of the device's
+ * configuration space.  If there was no error, RET1 is set to zero and
+ * RET2 is set to the data read.  Insignificant bits in RET2 are not
+ * guarenteed to have any specific value and therefore must be ignored.
+ *
+ * The data returned in RET2 is size based byte swapped.
+ *
+ * If an error occurs during the read, set RET1 to a non-zero value.  The
+ * given pci_config_offset must be 'size' aligned.
+ */
+#define HV_FAST_PCI_CONFIG_GET		0xb4
+
+/* pci_config_put()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_CONFIG_PUT
+ * ARG0:	devhandle
+ * ARG1:	pci_device
+ * ARG2:	pci_config_offset
+ * ARG3:	size
+ * ARG4:	data
+ * RET0:	status
+ * RET1:	error_flag
+ * ERRORS:	EINVAL		Invalid devhandle/pci_device/offset/size
+ *		EBADALIGN	pci_config_offset not size aligned
+ *		ENOACCESS	Access to this offset is not permitted
+ *
+ * Write PCI configuration space for the adapter described by the given
+ * devhandle.  Write size (1, 2, or 4) bytes of data in a single operation,
+ * at pci_config_offset from the beginning of the device's configuration
+ * space.  The data argument contains the data to be written to configuration
+ * space.  Prior to writing, the data is size based byte swapped.
+ *
+ * If an error occurs during the write access, do not generate an error
+ * report, do set RET1 to a non-zero value.  Otherwise RET1 is zero.
+ * The given pci_config_offset must be 'size' aligned.
+ *
+ * This function is permitted to read from offset zero in the configuration
+ * space described by the given pci_device if necessary to ensure that the
+ * write access to config space completes.
+ */
+#define HV_FAST_PCI_CONFIG_PUT		0xb5
+
+/* pci_peek()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_PEEK
+ * ARG0:	devhandle
+ * ARG1:	real address
+ * ARG2:	size
+ * RET0:	status
+ * RET1:	error_flag
+ * RET2:	data
+ * ERRORS:	EINVAL		Invalid devhandle or size
+ *		EBADALIGN	Improperly aligned real address
+ *		ENORADDR	Bad real address
+ *		ENOACCESS	Guest access prohibited
+ *
+ * Attempt to read the IO address given by the given devhandle, real address,
+ * and size.  Size must be 1, 2, 4, or 8.  The read is performed as a single
+ * access operation using the given size.  If an error occurs when reading
+ * from the given location, do not generate an error report, but return a
+ * non-zero value in RET1.  If the read was successful, return zero in RET1
+ * and return the actual data read in RET2.  The data returned is size based
+ * byte swapped.
+ *
+ * Non-significant bits in RET2 are not guarenteed to have any specific value
+ * and therefore must be ignored.  If RET1 is returned as non-zero, the data
+ * value is not guarenteed to have any specific value and should be ignored.
+ *
+ * The caller must have permission to read from the given devhandle, real
+ * address, which must be an IO address.  The argument real address must be a
+ * size aligned address.
+ *
+ * The hypervisor implementation of this function must block access to any
+ * IO address that the guest does not have explicit permission to access.
+ */
+#define HV_FAST_PCI_PEEK		0xb6
+
+/* pci_poke()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_POKE
+ * ARG0:	devhandle
+ * ARG1:	real address
+ * ARG2:	size
+ * ARG3:	data
+ * ARG4:	pci_device
+ * RET0:	status
+ * RET1:	error_flag
+ * ERRORS:	EINVAL		Invalid devhandle, size, or pci_device
+ *		EBADALIGN	Improperly aligned real address
+ *		ENORADDR	Bad real address
+ *		ENOACCESS	Guest access prohibited
+ *		ENOTSUPPORTED	Function is not supported by implementation
+ *
+ * Attempt to write data to the IO address given by the given devhandle,
+ * real address, and size.  Size must be 1, 2, 4, or 8.  The write is
+ * performed as a single access operation using the given size. Prior to
+ * writing the data is size based swapped.
+ *
+ * If an error occurs when writing to the given location, do not generate an
+ * error report, but return a non-zero value in RET1.  If the write was
+ * successful, return zero in RET1.
+ *
+ * pci_device describes the configuration address of the device being
+ * written to.  The implementation may safely read from offset 0 with
+ * the configuration space of the device described by devhandle and
+ * pci_device in order to guarantee that the write portion of the operation
+ * completes
+ *
+ * Any error that occurs due to the read shall be reported using the normal
+ * error reporting mechanisms .. the read error is not suppressed.
+ *
+ * The caller must have permission to write to the given devhandle, real
+ * address, which must be an IO address.  The argument real address must be a
+ * size aligned address.  The caller must have permission to read from
+ * the given devhandle, pci_device cofiguration space offset 0.
+ *
+ * The hypervisor implementation of this function must block access to any
+ * IO address that the guest does not have explicit permission to access.
+ */
+#define HV_FAST_PCI_POKE		0xb7
+
+/* pci_dma_sync()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_DMA_SYNC
+ * ARG0:	devhandle
+ * ARG1:	real address
+ * ARG2:	size
+ * ARG3:	io_sync_direction
+ * RET0:	status
+ * RET1:	#synced
+ * ERRORS:	EINVAL		Invalid devhandle or io_sync_direction
+ *		ENORADDR	Bad real address
+ *
+ * Synchronize a memory region described by the given real address and size,
+ * for the device defined by the given devhandle using the direction(s)
+ * defined by the given io_sync_direction.  The argument size is the size of
+ * the memory region in bytes.
+ *
+ * Return the actual number of bytes synchronized in the return value #synced,
+ * which may be less than or equal to the argument size.  If the return
+ * value #synced is less than size, the caller must continue to call this
+ * function with updated real address and size arguments until the entire
+ * memory region is synchronized.
+ */
+#define HV_FAST_PCI_DMA_SYNC		0xb8
+
+/* PCI MSI services.  */
+
+#define HV_MSITYPE_MSI32		0x00
+#define HV_MSITYPE_MSI64		0x01
+
+#define HV_MSIQSTATE_IDLE		0x00
+#define HV_MSIQSTATE_ERROR		0x01
+
+#define HV_MSIQ_INVALID			0x00
+#define HV_MSIQ_VALID			0x01
+
+#define HV_MSISTATE_IDLE		0x00
+#define HV_MSISTATE_DELIVERED		0x01
+
+#define HV_MSIVALID_INVALID		0x00
+#define HV_MSIVALID_VALID		0x01
+
+#define HV_PCIE_MSGTYPE_PME_MSG		0x18
+#define HV_PCIE_MSGTYPE_PME_ACK_MSG	0x1b
+#define HV_PCIE_MSGTYPE_CORR_MSG	0x30
+#define HV_PCIE_MSGTYPE_NONFATAL_MSG	0x31
+#define HV_PCIE_MSGTYPE_FATAL_MSG	0x33
+
+#define HV_MSG_INVALID			0x00
+#define HV_MSG_VALID			0x01
+
+/* pci_msiq_conf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_CONF
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * ARG2:	real address
+ * ARG3:	number of entries
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle, msiqid or nentries
+ *		EBADALIGN	Improperly aligned real address
+ *		ENORADDR	Bad real address
+ *
+ * Configure the MSI queue given by the devhandle and msiqid arguments,
+ * and to be placed at the given real address and be of the given
+ * number of entries.  The real address must be aligned exactly to match
+ * the queue size.  Each queue entry is 64-bytes long, so f.e. a 32 entry
+ * queue must be aligned on a 2048 byte real address boundary.  The MSI-EQ
+ * Head and Tail are initialized so that the MSI-EQ is 'empty'.
+ *
+ * Implementation Note: Certain implementations have fixed sized queues.  In
+ *                      that case, number of entries must contain the correct
+ *                      value.
+ */
+#define HV_FAST_PCI_MSIQ_CONF		0xc0
+
+/* pci_msiq_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_INFO
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * RET0:	status
+ * RET1:	real address
+ * RET2:	number of entries
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid
+ *
+ * Return the configuration information for the MSI queue described
+ * by the given devhandle and msiqid.  The base address of the queue
+ * is returned in ARG1 and the number of entries is returned in ARG2.
+ * If the queue is unconfigured, the real address is undefined and the
+ * number of entries will be returned as zero.
+ */
+#define HV_FAST_PCI_MSIQ_INFO		0xc1
+
+/* pci_msiq_getvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_GETVALID
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * RET0:	status
+ * RET1:	msiqvalid	(HV_MSIQ_VALID or HV_MSIQ_INVALID)
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid
+ *
+ * Get the valid state of the MSI-EQ described by the given devhandle and
+ * msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETVALID	0xc2
+
+/* pci_msiq_setvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_SETVALID
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * ARG2:	msiqvalid	(HV_MSIQ_VALID or HV_MSIQ_INVALID)
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid or msiqvalid
+ *				value or MSI EQ is uninitialized
+ *
+ * Set the valid state of the MSI-EQ described by the given devhandle and
+ * msiqid to the given msiqvalid.
+ */
+#define HV_FAST_PCI_MSIQ_SETVALID	0xc3
+
+/* pci_msiq_getstate()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_GETSTATE
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * RET0:	status
+ * RET1:	msiqstate	(HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid
+ *
+ * Get the state of the MSI-EQ described by the given devhandle and
+ * msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETSTATE	0xc4
+
+/* pci_msiq_getvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_GETVALID
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * ARG2:	msiqstate	(HV_MSIQSTATE_IDLE or HV_MSIQSTATE_ERROR)
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid or msiqstate
+ *				value or MSI EQ is uninitialized
+ *
+ * Set the state of the MSI-EQ described by the given devhandle and
+ * msiqid to the given msiqvalid.
+ */
+#define HV_FAST_PCI_MSIQ_SETSTATE	0xc5
+
+/* pci_msiq_gethead()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_GETHEAD
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * RET0:	status
+ * RET1:	msiqhead
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid
+ *
+ * Get the current MSI EQ queue head for the MSI-EQ described by the
+ * given devhandle and msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETHEAD	0xc6
+
+/* pci_msiq_sethead()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_SETHEAD
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * ARG2:	msiqhead
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid or msiqhead,
+ *				or MSI EQ is uninitialized
+ *
+ * Set the current MSI EQ queue head for the MSI-EQ described by the
+ * given devhandle and msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_SETHEAD	0xc7
+
+/* pci_msiq_gettail()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSIQ_GETTAIL
+ * ARG0:	devhandle
+ * ARG1:	msiqid
+ * RET0:	status
+ * RET1:	msiqtail
+ * ERRORS:	EINVAL		Invalid devhandle or msiqid
+ *
+ * Get the current MSI EQ queue tail for the MSI-EQ described by the
+ * given devhandle and msiqid.
+ */
+#define HV_FAST_PCI_MSIQ_GETTAIL	0xc8
+
+/* pci_msi_getvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_GETVALID
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * RET0:	status
+ * RET1:	msivalidstate
+ * ERRORS:	EINVAL		Invalid devhandle or msinum
+ *
+ * Get the current valid/enabled state for the MSI defined by the
+ * given devhandle and msinum.
+ */
+#define HV_FAST_PCI_MSI_GETVALID	0xc9
+
+/* pci_msi_setvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_SETVALID
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * ARG2:	msivalidstate
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msinum or msivalidstate
+ *
+ * Set the current valid/enabled state for the MSI defined by the
+ * given devhandle and msinum.
+ */
+#define HV_FAST_PCI_MSI_SETVALID	0xca
+
+/* pci_msi_getmsiq()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_GETMSIQ
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * RET0:	status
+ * RET1:	msiqid
+ * ERRORS:	EINVAL		Invalid devhandle or msinum or MSI is unbound
+ *
+ * Get the MSI EQ that the MSI defined by the given devhandle and
+ * msinum is bound to.
+ */
+#define HV_FAST_PCI_MSI_GETMSIQ		0xcb
+
+/* pci_msi_setmsiq()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_SETMSIQ
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * ARG2:	msitype
+ * ARG3:	msiqid
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msinum or msiqid
+ *
+ * Set the MSI EQ that the MSI defined by the given devhandle and
+ * msinum is bound to.
+ */
+#define HV_FAST_PCI_MSI_SETMSIQ		0xcc
+
+/* pci_msi_getstate()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_GETSTATE
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * RET0:	status
+ * RET1:	msistate
+ * ERRORS:	EINVAL		Invalid devhandle or msinum
+ *
+ * Get the state of the MSI defined by the given devhandle and msinum.
+ * If not initialized, return HV_MSISTATE_IDLE.
+ */
+#define HV_FAST_PCI_MSI_GETSTATE	0xcd
+
+/* pci_msi_setstate()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSI_SETSTATE
+ * ARG0:	devhandle
+ * ARG1:	msinum
+ * ARG2:	msistate
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msinum or msistate
+ *
+ * Set the state of the MSI defined by the given devhandle and msinum.
+ */
+#define HV_FAST_PCI_MSI_SETSTATE	0xce
+
+/* pci_msg_getmsiq()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSG_GETMSIQ
+ * ARG0:	devhandle
+ * ARG1:	msgtype
+ * RET0:	status
+ * RET1:	msiqid
+ * ERRORS:	EINVAL		Invalid devhandle or msgtype
+ *
+ * Get the MSI EQ of the MSG defined by the given devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_GETMSIQ		0xd0
+
+/* pci_msg_setmsiq()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSG_SETMSIQ
+ * ARG0:	devhandle
+ * ARG1:	msgtype
+ * ARG2:	msiqid
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle, msgtype, or msiqid
+ *
+ * Set the MSI EQ of the MSG defined by the given devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_SETMSIQ		0xd1
+
+/* pci_msg_getvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSG_GETVALID
+ * ARG0:	devhandle
+ * ARG1:	msgtype
+ * RET0:	status
+ * RET1:	msgvalidstate
+ * ERRORS:	EINVAL		Invalid devhandle or msgtype
+ *
+ * Get the valid/enabled state of the MSG defined by the given
+ * devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_GETVALID	0xd2
+
+/* pci_msg_setvalid()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_PCI_MSG_SETVALID
+ * ARG0:	devhandle
+ * ARG1:	msgtype
+ * ARG2:	msgvalidstate
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid devhandle or msgtype or msgvalidstate
+ *
+ * Set the valid/enabled state of the MSG defined by the given
+ * devhandle and msgtype.
+ */
+#define HV_FAST_PCI_MSG_SETVALID	0xd3
+
+/* Logical Domain Channel services.  */
+
+#define LDC_CHANNEL_DOWN		0
+#define LDC_CHANNEL_UP			1
+#define LDC_CHANNEL_RESETTING		2
+
+/* ldc_tx_qconf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_TX_QCONF
+ * ARG0:	channel ID
+ * ARG1:	real address base of queue
+ * ARG2:	num entries in queue
+ * RET0:	status
+ *
+ * Configure transmit queue for the LDC endpoint specified by the
+ * given channel ID, to be placed at the given real address, and
+ * be of the given num entries.  Num entries must be a power of two.
+ * The real address base of the queue must be aligned on the queue
+ * size.  Each queue entry is 64-bytes, so for example, a 32 entry
+ * queue must be aligned on a 2048 byte real address boundary.
+ *
+ * Upon configuration of a valid transmit queue the head and tail
+ * pointers are set to a hypervisor specific identical value indicating
+ * that the queue initially is empty.
+ *
+ * The endpoint's transmit queue is un-configured if num entries is zero.
+ *
+ * The maximum number of entries for each queue for a specific cpu may be
+ * determined from the machine description.  A transmit queue may be
+ * specified even in the event that the LDC is down (peer endpoint has no
+ * receive queue specified).  Transmission will begin as soon as the peer
+ * endpoint defines a receive queue.
+ *
+ * It is recommended that a guest wait for a transmit queue to empty prior
+ * to reconfiguring it, or un-configuring it.  Re or un-configuring of a
+ * non-empty transmit queue behaves exactly as defined above, however it
+ * is undefined as to how many of the pending entries in the original queue
+ * will be delivered prior to the re-configuration taking effect.
+ * Furthermore, as the queue configuration causes a reset of the head and
+ * tail pointers there is no way for a guest to determine how many entries
+ * have been sent after the configuration operation.
+ */
+#define HV_FAST_LDC_TX_QCONF		0xe0
+
+/* ldc_tx_qinfo()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_TX_QINFO
+ * ARG0:	channel ID
+ * RET0:	status
+ * RET1:	real address base of queue
+ * RET2:	num entries in queue
+ *
+ * Return the configuration info for the transmit queue of LDC endpoint
+ * defined by the given channel ID.  The real address is the currently
+ * defined real address base of the defined queue, and num entries is the
+ * size of the queue in terms of number of entries.
+ *
+ * If the specified channel ID is a valid endpoint number, but no transmit
+ * queue has been defined this service will return success, but with num
+ * entries set to zero and the real address will have an undefined value.
+ */
+#define HV_FAST_LDC_TX_QINFO		0xe1
+
+/* ldc_tx_get_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_TX_GET_STATE
+ * ARG0:	channel ID
+ * RET0:	status
+ * RET1:	head offset
+ * RET2:	tail offset
+ * RET3:	channel state
+ *
+ * Return the transmit state, and the head and tail queue pointers, for
+ * the transmit queue of the LDC endpoint defined by the given channel ID.
+ * The head and tail values are the byte offset of the head and tail
+ * positions of the transmit queue for the specified endpoint.
+ */
+#define HV_FAST_LDC_TX_GET_STATE	0xe2
+
+/* ldc_tx_set_qtail()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_TX_SET_QTAIL
+ * ARG0:	channel ID
+ * ARG1:	tail offset
+ * RET0:	status
+ *
+ * Update the tail pointer for the transmit queue associated with the LDC
+ * endpoint defined by the given channel ID.  The tail offset specified
+ * must be aligned on a 64 byte boundary, and calculated so as to increase
+ * the number of pending entries on the transmit queue.  Any attempt to
+ * decrease the number of pending transmit queue entires is considered
+ * an invalid tail offset and will result in an EINVAL error.
+ *
+ * Since the tail of the transmit queue may not be moved backwards, the
+ * transmit queue may be flushed by configuring a new transmit queue,
+ * whereupon the hypervisor will configure the initial transmit head and
+ * tail pointers to be equal.
+ */
+#define HV_FAST_LDC_TX_SET_QTAIL	0xe3
+
+/* ldc_rx_qconf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_RX_QCONF
+ * ARG0:	channel ID
+ * ARG1:	real address base of queue
+ * ARG2:	num entries in queue
+ * RET0:	status
+ *
+ * Configure receive queue for the LDC endpoint specified by the
+ * given channel ID, to be placed at the given real address, and
+ * be of the given num entries.  Num entries must be a power of two.
+ * The real address base of the queue must be aligned on the queue
+ * size.  Each queue entry is 64-bytes, so for example, a 32 entry
+ * queue must be aligned on a 2048 byte real address boundary.
+ *
+ * The endpoint's transmit queue is un-configured if num entries is zero.
+ *
+ * If a valid receive queue is specified for a local endpoint the LDC is
+ * in the up state for the purpose of transmission to this endpoint.
+ *
+ * The maximum number of entries for each queue for a specific cpu may be
+ * determined from the machine description.
+ *
+ * As receive queue configuration causes a reset of the queue's head and
+ * tail pointers there is no way for a gues to determine how many entries
+ * have been received between a preceeding ldc_get_rx_state() API call
+ * and the completion of the configuration operation.  It should be noted
+ * that datagram delivery is not guarenteed via domain channels anyway,
+ * and therefore any higher protocol should be resilient to datagram
+ * loss if necessary.  However, to overcome this specific race potential
+ * it is recommended, for example, that a higher level protocol be employed
+ * to ensure either retransmission, or ensure that no datagrams are pending
+ * on the peer endpoint's transmit queue prior to the configuration process.
+ */
+#define HV_FAST_LDC_RX_QCONF		0xe4
+
+/* ldc_rx_qinfo()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_RX_QINFO
+ * ARG0:	channel ID
+ * RET0:	status
+ * RET1:	real address base of queue
+ * RET2:	num entries in queue
+ *
+ * Return the configuration info for the receive queue of LDC endpoint
+ * defined by the given channel ID.  The real address is the currently
+ * defined real address base of the defined queue, and num entries is the
+ * size of the queue in terms of number of entries.
+ *
+ * If the specified channel ID is a valid endpoint number, but no receive
+ * queue has been defined this service will return success, but with num
+ * entries set to zero and the real address will have an undefined value.
+ */
+#define HV_FAST_LDC_RX_QINFO		0xe5
+
+/* ldc_rx_get_state()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_RX_GET_STATE
+ * ARG0:	channel ID
+ * RET0:	status
+ * RET1:	head offset
+ * RET2:	tail offset
+ * RET3:	channel state
+ *
+ * Return the receive state, and the head and tail queue pointers, for
+ * the receive queue of the LDC endpoint defined by the given channel ID.
+ * The head and tail values are the byte offset of the head and tail
+ * positions of the receive queue for the specified endpoint.
+ */
+#define HV_FAST_LDC_RX_GET_STATE	0xe6
+
+/* ldc_rx_set_qhead()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_RX_SET_QHEAD
+ * ARG0:	channel ID
+ * ARG1:	head offset
+ * RET0:	status
+ *
+ * Update the head pointer for the receive queue associated with the LDC
+ * endpoint defined by the given channel ID.  The head offset specified
+ * must be aligned on a 64 byte boundary, and calculated so as to decrease
+ * the number of pending entries on the receive queue.  Any attempt to
+ * increase the number of pending receive queue entires is considered
+ * an invalid head offset and will result in an EINVAL error.
+ *
+ * The receive queue may be flushed by setting the head offset equal
+ * to the current tail offset.
+ */
+#define HV_FAST_LDC_RX_SET_QHEAD	0xe7
+
+/* LDC Map Table Entry.  Each slot is defined by a translation table
+ * entry, as specified by the LDC_MTE_* bits below, and a 64-bit
+ * hypervisor invalidation cookie.
+ */
+#define LDC_MTE_PADDR	0x0fffffffffffe000 /* pa[55:13]          */
+#define LDC_MTE_COPY_W	0x0000000000000400 /* copy write access  */
+#define LDC_MTE_COPY_R	0x0000000000000200 /* copy read access   */
+#define LDC_MTE_IOMMU_W	0x0000000000000100 /* IOMMU write access */
+#define LDC_MTE_IOMMU_R	0x0000000000000080 /* IOMMU read access  */
+#define LDC_MTE_EXEC	0x0000000000000040 /* execute            */
+#define LDC_MTE_WRITE	0x0000000000000020 /* read               */
+#define LDC_MTE_READ	0x0000000000000010 /* write              */
+#define LDC_MTE_SZALL	0x000000000000000f /* page size bits     */
+#define LDC_MTE_SZ16GB	0x0000000000000007 /* 16GB page          */
+#define LDC_MTE_SZ2GB	0x0000000000000006 /* 2GB page           */
+#define LDC_MTE_SZ256MB	0x0000000000000005 /* 256MB page         */
+#define LDC_MTE_SZ32MB	0x0000000000000004 /* 32MB page          */
+#define LDC_MTE_SZ4MB	0x0000000000000003 /* 4MB page           */
+#define LDC_MTE_SZ512K	0x0000000000000002 /* 512K page          */
+#define LDC_MTE_SZ64K	0x0000000000000001 /* 64K page           */
+#define LDC_MTE_SZ8K	0x0000000000000000 /* 8K page            */
+
+#ifndef __ASSEMBLY__
+struct ldc_mtable_entry {
+	unsigned long	mte;
+	unsigned long	cookie;
+};
+#endif
+
+/* ldc_set_map_table()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_SET_MAP_TABLE
+ * ARG0:	channel ID
+ * ARG1:	table real address
+ * ARG2:	num entries
+ * RET0:	status
+ *
+ * Register the MTE table at the given table real address, with the
+ * specified num entries, for the LDC indicated by the given channel
+ * ID.
+ */
+#define HV_FAST_LDC_SET_MAP_TABLE	0xea
+
+/* ldc_get_map_table()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_GET_MAP_TABLE
+ * ARG0:	channel ID
+ * RET0:	status
+ * RET1:	table real address
+ * RET2:	num entries
+ *
+ * Return the configuration of the current mapping table registered
+ * for the given channel ID.
+ */
+#define HV_FAST_LDC_GET_MAP_TABLE	0xeb
+
+#define LDC_COPY_IN	0
+#define LDC_COPY_OUT	1
+
+/* ldc_copy()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_COPY
+ * ARG0:	channel ID
+ * ARG1:	LDC_COPY_* direction code
+ * ARG2:	target real address
+ * ARG3:	local real address
+ * ARG4:	length in bytes
+ * RET0:	status
+ * RET1:	actual length in bytes
+ */
+#define HV_FAST_LDC_COPY		0xec
+
+#define LDC_MEM_READ	1
+#define LDC_MEM_WRITE	2
+#define LDC_MEM_EXEC	4
+
+/* ldc_mapin()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_MAPIN
+ * ARG0:	channel ID
+ * ARG1:	cookie
+ * RET0:	status
+ * RET1:	real address
+ * RET2:	LDC_MEM_* permissions
+ */
+#define HV_FAST_LDC_MAPIN		0xed
+
+/* ldc_unmap()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_UNMAP
+ * ARG0:	real address
+ * RET0:	status
+ */
+#define HV_FAST_LDC_UNMAP		0xee
+
+/* ldc_revoke()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_LDC_REVOKE
+ * ARG0:	channel ID
+ * ARG1:	cookie
+ * ARG2:	ldc_mtable_entry cookie
+ * RET0:	status
+ */
+#define HV_FAST_LDC_REVOKE		0xef
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_ldc_tx_qconf(unsigned long channel,
+					unsigned long ra,
+					unsigned long num_entries);
+extern unsigned long sun4v_ldc_tx_qinfo(unsigned long channel,
+					unsigned long *ra,
+					unsigned long *num_entries);
+extern unsigned long sun4v_ldc_tx_get_state(unsigned long channel,
+					    unsigned long *head_off,
+					    unsigned long *tail_off,
+					    unsigned long *chan_state);
+extern unsigned long sun4v_ldc_tx_set_qtail(unsigned long channel,
+					    unsigned long tail_off);
+extern unsigned long sun4v_ldc_rx_qconf(unsigned long channel,
+					unsigned long ra,
+					unsigned long num_entries);
+extern unsigned long sun4v_ldc_rx_qinfo(unsigned long channel,
+					unsigned long *ra,
+					unsigned long *num_entries);
+extern unsigned long sun4v_ldc_rx_get_state(unsigned long channel,
+					    unsigned long *head_off,
+					    unsigned long *tail_off,
+					    unsigned long *chan_state);
+extern unsigned long sun4v_ldc_rx_set_qhead(unsigned long channel,
+					    unsigned long head_off);
+extern unsigned long sun4v_ldc_set_map_table(unsigned long channel,
+					     unsigned long ra,
+					     unsigned long num_entries);
+extern unsigned long sun4v_ldc_get_map_table(unsigned long channel,
+					     unsigned long *ra,
+					     unsigned long *num_entries);
+extern unsigned long sun4v_ldc_copy(unsigned long channel,
+				    unsigned long dir_code,
+				    unsigned long tgt_raddr,
+				    unsigned long lcl_raddr,
+				    unsigned long len,
+				    unsigned long *actual_len);
+extern unsigned long sun4v_ldc_mapin(unsigned long channel,
+				     unsigned long cookie,
+				     unsigned long *ra,
+				     unsigned long *perm);
+extern unsigned long sun4v_ldc_unmap(unsigned long ra);
+extern unsigned long sun4v_ldc_revoke(unsigned long channel,
+				      unsigned long cookie,
+				      unsigned long mte_cookie);
+#endif
+
+/* Performance counter services.  */
+
+#define HV_PERF_JBUS_PERF_CTRL_REG	0x00
+#define HV_PERF_JBUS_PERF_CNT_REG	0x01
+#define HV_PERF_DRAM_PERF_CTRL_REG_0	0x02
+#define HV_PERF_DRAM_PERF_CNT_REG_0	0x03
+#define HV_PERF_DRAM_PERF_CTRL_REG_1	0x04
+#define HV_PERF_DRAM_PERF_CNT_REG_1	0x05
+#define HV_PERF_DRAM_PERF_CTRL_REG_2	0x06
+#define HV_PERF_DRAM_PERF_CNT_REG_2	0x07
+#define HV_PERF_DRAM_PERF_CTRL_REG_3	0x08
+#define HV_PERF_DRAM_PERF_CNT_REG_3	0x09
+
+/* get_perfreg()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_GET_PERFREG
+ * ARG0:	performance reg number
+ * RET0:	status
+ * RET1:	performance reg value
+ * ERRORS:	EINVAL		Invalid performance register number
+ *		ENOACCESS	No access allowed to performance counters
+ *
+ * Read the value of the given DRAM/JBUS performance counter/control register.
+ */
+#define HV_FAST_GET_PERFREG		0x100
+
+/* set_perfreg()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_SET_PERFREG
+ * ARG0:	performance reg number
+ * ARG1:	performance reg value
+ * RET0:	status
+ * ERRORS:	EINVAL		Invalid performance register number
+ *		ENOACCESS	No access allowed to performance counters
+ *
+ * Write the given performance reg value to the given DRAM/JBUS
+ * performance counter/control register.
+ */
+#define HV_FAST_SET_PERFREG		0x101
+
+/* MMU statistics services.
+ *
+ * The hypervisor maintains MMU statistics and privileged code provides
+ * a buffer where these statistics can be collected.  It is continually
+ * updated once configured.  The layout is as follows:
+ */
+#ifndef __ASSEMBLY__
+struct hv_mmu_statistics {
+	unsigned long immu_tsb_hits_ctx0_8k_tte;
+	unsigned long immu_tsb_ticks_ctx0_8k_tte;
+	unsigned long immu_tsb_hits_ctx0_64k_tte;
+	unsigned long immu_tsb_ticks_ctx0_64k_tte;
+	unsigned long __reserved1[2];
+	unsigned long immu_tsb_hits_ctx0_4mb_tte;
+	unsigned long immu_tsb_ticks_ctx0_4mb_tte;
+	unsigned long __reserved2[2];
+	unsigned long immu_tsb_hits_ctx0_256mb_tte;
+	unsigned long immu_tsb_ticks_ctx0_256mb_tte;
+	unsigned long __reserved3[4];
+	unsigned long immu_tsb_hits_ctxnon0_8k_tte;
+	unsigned long immu_tsb_ticks_ctxnon0_8k_tte;
+	unsigned long immu_tsb_hits_ctxnon0_64k_tte;
+	unsigned long immu_tsb_ticks_ctxnon0_64k_tte;
+	unsigned long __reserved4[2];
+	unsigned long immu_tsb_hits_ctxnon0_4mb_tte;
+	unsigned long immu_tsb_ticks_ctxnon0_4mb_tte;
+	unsigned long __reserved5[2];
+	unsigned long immu_tsb_hits_ctxnon0_256mb_tte;
+	unsigned long immu_tsb_ticks_ctxnon0_256mb_tte;
+	unsigned long __reserved6[4];
+	unsigned long dmmu_tsb_hits_ctx0_8k_tte;
+	unsigned long dmmu_tsb_ticks_ctx0_8k_tte;
+	unsigned long dmmu_tsb_hits_ctx0_64k_tte;
+	unsigned long dmmu_tsb_ticks_ctx0_64k_tte;
+	unsigned long __reserved7[2];
+	unsigned long dmmu_tsb_hits_ctx0_4mb_tte;
+	unsigned long dmmu_tsb_ticks_ctx0_4mb_tte;
+	unsigned long __reserved8[2];
+	unsigned long dmmu_tsb_hits_ctx0_256mb_tte;
+	unsigned long dmmu_tsb_ticks_ctx0_256mb_tte;
+	unsigned long __reserved9[4];
+	unsigned long dmmu_tsb_hits_ctxnon0_8k_tte;
+	unsigned long dmmu_tsb_ticks_ctxnon0_8k_tte;
+	unsigned long dmmu_tsb_hits_ctxnon0_64k_tte;
+	unsigned long dmmu_tsb_ticks_ctxnon0_64k_tte;
+	unsigned long __reserved10[2];
+	unsigned long dmmu_tsb_hits_ctxnon0_4mb_tte;
+	unsigned long dmmu_tsb_ticks_ctxnon0_4mb_tte;
+	unsigned long __reserved11[2];
+	unsigned long dmmu_tsb_hits_ctxnon0_256mb_tte;
+	unsigned long dmmu_tsb_ticks_ctxnon0_256mb_tte;
+	unsigned long __reserved12[4];
+};
+#endif
+
+/* mmustat_conf()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMUSTAT_CONF
+ * ARG0:	real address
+ * RET0:	status
+ * RET1:	real address
+ * ERRORS:	ENORADDR	Invalid real address
+ *		EBADALIGN	Real address not aligned on 64-byte boundary
+ *		EBADTRAP	API not supported on this processor
+ *
+ * Enable MMU statistic gathering using the buffer at the given real
+ * address on the current virtual CPU.  The new buffer real address
+ * is given in ARG1, and the previously specified buffer real address
+ * is returned in RET1, or is returned as zero for the first invocation.
+ *
+ * If the passed in real address argument is zero, this will disable
+ * MMU statistic collection on the current virtual CPU.  If an error is
+ * returned then no statistics are collected.
+ *
+ * The buffer contents should be initialized to all zeros before being
+ * given to the hypervisor or else the statistics will be meaningless.
+ */
+#define HV_FAST_MMUSTAT_CONF		0x102
+
+/* mmustat_info()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_MMUSTAT_INFO
+ * RET0:	status
+ * RET1:	real address
+ * ERRORS:	EBADTRAP	API not supported on this processor
+ *
+ * Return the current state and real address of the currently configured
+ * MMU statistics buffer on the current virtual CPU.
+ */
+#define HV_FAST_MMUSTAT_INFO		0x103
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_mmustat_conf(unsigned long ra, unsigned long *orig_ra);
+extern unsigned long sun4v_mmustat_info(unsigned long *ra);
+#endif
+
+/* NCS crypto services  */
+
+/* ncs_request() sub-function numbers */
+#define HV_NCS_QCONF			0x01
+#define HV_NCS_QTAIL_UPDATE		0x02
+
+#ifndef __ASSEMBLY__
+struct hv_ncs_queue_entry {
+	/* MAU Control Register */
+	unsigned long	mau_control;
+#define MAU_CONTROL_INV_PARITY	0x0000000000002000
+#define MAU_CONTROL_STRAND	0x0000000000001800
+#define MAU_CONTROL_BUSY	0x0000000000000400
+#define MAU_CONTROL_INT		0x0000000000000200
+#define MAU_CONTROL_OP		0x00000000000001c0
+#define MAU_CONTROL_OP_SHIFT	6
+#define MAU_OP_LOAD_MA_MEMORY	0x0
+#define MAU_OP_STORE_MA_MEMORY	0x1
+#define MAU_OP_MODULAR_MULT	0x2
+#define MAU_OP_MODULAR_REDUCE	0x3
+#define MAU_OP_MODULAR_EXP_LOOP	0x4
+#define MAU_CONTROL_LEN		0x000000000000003f
+#define MAU_CONTROL_LEN_SHIFT	0
+
+	/* Real address of bytes to load or store bytes
+	 * into/out-of the MAU.
+	 */
+	unsigned long	mau_mpa;
+
+	/* Modular Arithmetic MA Offset Register.  */
+	unsigned long	mau_ma;
+
+	/* Modular Arithmetic N Prime Register.  */
+	unsigned long	mau_np;
+};
+
+struct hv_ncs_qconf_arg {
+	unsigned long	mid;      /* MAU ID, 1 per core on Niagara */
+	unsigned long	base;     /* Real address base of queue */
+	unsigned long	end;	  /* Real address end of queue */
+	unsigned long	num_ents; /* Number of entries in queue */
+};
+
+struct hv_ncs_qtail_update_arg {
+	unsigned long	mid;      /* MAU ID, 1 per core on Niagara */
+	unsigned long	tail;     /* New tail index to use */
+	unsigned long	syncflag; /* only SYNCFLAG_SYNC is implemented */
+#define HV_NCS_SYNCFLAG_SYNC	0x00
+#define HV_NCS_SYNCFLAG_ASYNC	0x01
+};
+#endif
+
+/* ncs_request()
+ * TRAP:	HV_FAST_TRAP
+ * FUNCTION:	HV_FAST_NCS_REQUEST
+ * ARG0:	NCS sub-function
+ * ARG1:	sub-function argument real address
+ * ARG2:	size in bytes of sub-function argument
+ * RET0:	status
+ *
+ * The MAU chip of the Niagara processor is not directly accessible
+ * to privileged code, instead it is programmed indirectly via this
+ * hypervisor API.
+ *
+ * The interfaces defines a queue of MAU operations to perform.
+ * Privileged code registers a queue with the hypervisor by invoking
+ * this HVAPI with the HV_NCS_QCONF sub-function, which defines the
+ * base, end, and number of entries of the queue.  Each queue entry
+ * contains a MAU register struct block.
+ *
+ * The privileged code then proceeds to add entries to the queue and
+ * then invoke the HV_NCS_QTAIL_UPDATE sub-function.  Since only
+ * synchronous operations are supported by the current hypervisor,
+ * HV_NCS_QTAIL_UPDATE will run all the pending queue entries to
+ * completion and return HV_EOK, or return an error code.
+ *
+ * The real address of the sub-function argument must be aligned on at
+ * least an 8-byte boundary.
+ *
+ * The tail argument of HV_NCS_QTAIL_UPDATE is an index, not a byte
+ * offset, into the queue and must be less than or equal the 'num_ents'
+ * argument given in the HV_NCS_QCONF call.
+ */
+#define HV_FAST_NCS_REQUEST		0x110
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_ncs_request(unsigned long request,
+				       unsigned long arg_ra,
+				       unsigned long arg_size);
+#endif
+
+#define HV_FAST_FIRE_GET_PERFREG	0x120
+#define HV_FAST_FIRE_SET_PERFREG	0x121
+
+/* Function numbers for HV_CORE_TRAP.  */
+#define HV_CORE_SET_VER			0x00
+#define HV_CORE_PUTCHAR			0x01
+#define HV_CORE_EXIT			0x02
+#define HV_CORE_GET_VER			0x03
+
+/* Hypervisor API groups for use with HV_CORE_SET_VER and
+ * HV_CORE_GET_VER.
+ */
+#define HV_GRP_SUN4V			0x0000
+#define HV_GRP_CORE			0x0001
+#define HV_GRP_INTR			0x0002
+#define HV_GRP_SOFT_STATE		0x0003
+#define HV_GRP_PCI			0x0100
+#define HV_GRP_LDOM			0x0101
+#define HV_GRP_SVC_CHAN			0x0102
+#define HV_GRP_NCS			0x0103
+#define HV_GRP_RNG			0x0104
+#define HV_GRP_NIAG_PERF		0x0200
+#define HV_GRP_FIRE_PERF		0x0201
+#define HV_GRP_N2_CPU			0x0202
+#define HV_GRP_NIU			0x0204
+#define HV_GRP_VF_CPU			0x0205
+#define HV_GRP_DIAG			0x0300
+
+#ifndef __ASSEMBLY__
+extern unsigned long sun4v_get_version(unsigned long group,
+				       unsigned long *major,
+				       unsigned long *minor);
+extern unsigned long sun4v_set_version(unsigned long group,
+				       unsigned long major,
+				       unsigned long minor,
+				       unsigned long *actual_minor);
+
+extern int sun4v_hvapi_register(unsigned long group, unsigned long major,
+				unsigned long *minor);
+extern void sun4v_hvapi_unregister(unsigned long group);
+extern int sun4v_hvapi_get(unsigned long group,
+			   unsigned long *major,
+			   unsigned long *minor);
+extern void sun4v_hvapi_init(void);
+#endif
+
+#endif /* !(_SPARC64_HYPERVISOR_H) */
diff --git a/arch/sparc/include/asm/ide.h b/arch/sparc/include/asm/ide.h
new file mode 100644
index 000000000000..b7af3d658239
--- /dev/null
+++ b/arch/sparc/include/asm/ide.h
@@ -0,0 +1,97 @@
+/* ide.h: SPARC PCI specific IDE glue.
+ *
+ * Copyright (C) 1997  David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1998  Eddie C. Dost   (ecd@skynet.be)
+ * Adaptation from sparc64 version to sparc by Pete Zaitcev.
+ */
+
+#ifndef _SPARC_IDE_H
+#define _SPARC_IDE_H
+
+#ifdef __KERNEL__
+
+#include <asm/io.h>
+#ifdef CONFIG_SPARC64
+#include <asm/pgalloc.h>
+#include <asm/spitfire.h>
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+#else
+#include <asm/pgtable.h>
+#include <asm/psr.h>
+#endif
+
+#define __ide_insl(data_reg, buffer, wcount) \
+	__ide_insw(data_reg, buffer, (wcount)<<1)
+#define __ide_outsl(data_reg, buffer, wcount) \
+	__ide_outsw(data_reg, buffer, (wcount)<<1)
+
+/* On sparc, I/O ports and MMIO registers are accessed identically.  */
+#define __ide_mm_insw	__ide_insw
+#define __ide_mm_insl	__ide_insl
+#define __ide_mm_outsw	__ide_outsw
+#define __ide_mm_outsl	__ide_outsl
+
+static inline void __ide_insw(void __iomem *port, void *dst, u32 count)
+{
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+	unsigned long end = (unsigned long)dst + (count << 1);
+#endif
+	u16 *ps = dst;
+	u32 *pi;
+
+	if(((unsigned long)ps) & 0x2) {
+		*ps++ = __raw_readw(port);
+		count--;
+	}
+	pi = (u32 *)ps;
+	while(count >= 2) {
+		u32 w;
+
+		w  = __raw_readw(port) << 16;
+		w |= __raw_readw(port);
+		*pi++ = w;
+		count -= 2;
+	}
+	ps = (u16 *)pi;
+	if(count)
+		*ps++ = __raw_readw(port);
+
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+	__flush_dcache_range((unsigned long)dst, end);
+#endif
+}
+
+static inline void __ide_outsw(void __iomem *port, const void *src, u32 count)
+{
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+	unsigned long end = (unsigned long)src + (count << 1);
+#endif
+	const u16 *ps = src;
+	const u32 *pi;
+
+	if(((unsigned long)src) & 0x2) {
+		__raw_writew(*ps++, port);
+		count--;
+	}
+	pi = (const u32 *)ps;
+	while(count >= 2) {
+		u32 w;
+
+		w = *pi++;
+		__raw_writew((w >> 16), port);
+		__raw_writew(w, port);
+		count -= 2;
+	}
+	ps = (const u16 *)pi;
+	if(count)
+		__raw_writew(*ps, port);
+
+#if defined(CONFIG_SPARC64) && defined(DCACHE_ALIASING_POSSIBLE)
+	__flush_dcache_range((unsigned long)src, end);
+#endif
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _SPARC_IDE_H */
diff --git a/arch/sparc/include/asm/idprom.h b/arch/sparc/include/asm/idprom.h
new file mode 100644
index 000000000000..6976aa2439c6
--- /dev/null
+++ b/arch/sparc/include/asm/idprom.h
@@ -0,0 +1,25 @@
+/*
+ * idprom.h: Macros and defines for idprom routines
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_IDPROM_H
+#define _SPARC_IDPROM_H
+
+#include <linux/types.h>
+
+struct idprom {
+	u8		id_format;	/* Format identifier (always 0x01) */
+	u8		id_machtype;	/* Machine type */
+	u8		id_ethaddr[6];	/* Hardware ethernet address */
+	s32		id_date;	/* Date of manufacture */
+	u32		id_sernum:24;	/* Unique serial number */
+	u8		id_cksum;	/* Checksum - xor of the data bytes */
+	u8		reserved[16];
+};
+
+extern struct idprom *idprom;
+extern void idprom_init(void);
+
+#endif /* !(_SPARC_IDPROM_H) */
diff --git a/arch/sparc/include/asm/intr_queue.h b/arch/sparc/include/asm/intr_queue.h
new file mode 100644
index 000000000000..206077dedc2a
--- /dev/null
+++ b/arch/sparc/include/asm/intr_queue.h
@@ -0,0 +1,15 @@
+#ifndef _SPARC64_INTR_QUEUE_H
+#define _SPARC64_INTR_QUEUE_H
+
+/* Sun4v interrupt queue registers, accessed via ASI_QUEUE.  */
+
+#define INTRQ_CPU_MONDO_HEAD	  0x3c0 /* CPU mondo head	          */
+#define INTRQ_CPU_MONDO_TAIL	  0x3c8 /* CPU mondo tail	          */
+#define INTRQ_DEVICE_MONDO_HEAD	  0x3d0 /* Device mondo head	          */
+#define INTRQ_DEVICE_MONDO_TAIL	  0x3d8 /* Device mondo tail	          */
+#define INTRQ_RESUM_MONDO_HEAD	  0x3e0 /* Resumable error mondo head     */
+#define INTRQ_RESUM_MONDO_TAIL	  0x3e8 /* Resumable error mondo tail     */
+#define INTRQ_NONRESUM_MONDO_HEAD 0x3f0 /* Non-resumable error mondo head */
+#define INTRQ_NONRESUM_MONDO_TAIL 0x3f8 /* Non-resumable error mondo head */
+
+#endif /* !(_SPARC64_INTR_QUEUE_H) */
diff --git a/arch/sparc/include/asm/io-unit.h b/arch/sparc/include/asm/io-unit.h
new file mode 100644
index 000000000000..96823b47fd45
--- /dev/null
+++ b/arch/sparc/include/asm/io-unit.h
@@ -0,0 +1,62 @@
+/* io-unit.h: Definitions for the sun4d IO-UNIT.
+ *
+ * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_IO_UNIT_H
+#define _SPARC_IO_UNIT_H
+
+#include <linux/spinlock.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+
+/* The io-unit handles all virtual to physical address translations
+ * that occur between the SBUS and physical memory.  Access by
+ * the cpu to IO registers and similar go over the xdbus so are
+ * translated by the on chip SRMMU.  The io-unit and the srmmu do
+ * not need to have the same translations at all, in fact most
+ * of the time the translations they handle are a disjunct set.
+ * Basically the io-unit handles all dvma sbus activity.
+ */
+ 
+/* AIEEE, unlike the nice sun4m, these monsters have 
+   fixed DMA range 64M */
+ 
+#define IOUNIT_DMA_BASE	    0xfc000000 /* TOP - 64M */
+#define IOUNIT_DMA_SIZE	    0x04000000 /* 64M */
+/* We use last 1M for sparc_dvma_malloc */
+#define IOUNIT_DVMA_SIZE    0x00100000 /* 1M */
+
+/* The format of an iopte in the external page tables */
+#define IOUPTE_PAGE          0xffffff00 /* Physical page number (PA[35:12])	*/
+#define IOUPTE_CACHE         0x00000080 /* Cached (in Viking/MXCC)		*/
+/* XXX Jakub, find out how to program SBUS streaming cache on XDBUS/sun4d.
+ * XXX Actually, all you should need to do is find out where the registers
+ * XXX are and copy over the sparc64 implementation I wrote.  There may be
+ * XXX some horrible hwbugs though, so be careful.  -DaveM
+ */
+#define IOUPTE_STREAM        0x00000040 /* Translation can use streaming cache	*/
+#define IOUPTE_INTRA	     0x00000008 /* SBUS direct slot->slot transfer	*/
+#define IOUPTE_WRITE         0x00000004 /* Writeable				*/
+#define IOUPTE_VALID         0x00000002 /* IOPTE is valid			*/
+#define IOUPTE_PARITY        0x00000001 /* Parity is checked during DVMA	*/
+
+struct iounit_struct {
+	unsigned long		bmap[(IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 3)) / sizeof(unsigned long)];
+	spinlock_t		lock;
+	iopte_t			*page_table;
+	unsigned long		rotor[3];
+	unsigned long		limit[4];
+};
+
+#define IOUNIT_BMAP1_START	0x00000000
+#define IOUNIT_BMAP1_END	(IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 1))
+#define IOUNIT_BMAP2_START	IOUNIT_BMAP1_END
+#define IOUNIT_BMAP2_END	IOUNIT_BMAP2_START + (IOUNIT_DMA_SIZE >> (PAGE_SHIFT + 2))
+#define IOUNIT_BMAPM_START	IOUNIT_BMAP2_END
+#define IOUNIT_BMAPM_END	((IOUNIT_DMA_SIZE - IOUNIT_DVMA_SIZE) >> PAGE_SHIFT)
+
+extern __u32 iounit_map_dma_init(struct sbus_bus *, int);
+#define iounit_map_dma_finish(sbus, addr, len) mmu_release_scsi_one(addr, len, sbus)
+extern __u32 iounit_map_dma_page(__u32, void *, struct sbus_bus *);
+
+#endif /* !(_SPARC_IO_UNIT_H) */
diff --git a/arch/sparc/include/asm/io.h b/arch/sparc/include/asm/io.h
new file mode 100644
index 000000000000..a34b2994937a
--- /dev/null
+++ b/arch/sparc/include/asm/io.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IO_H
+#define ___ASM_SPARC_IO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/io_64.h>
+#else
+#include <asm/io_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/io_32.h b/arch/sparc/include/asm/io_32.h
new file mode 100644
index 000000000000..10d7da450070
--- /dev/null
+++ b/arch/sparc/include/asm/io_32.h
@@ -0,0 +1,326 @@
+#ifndef __SPARC_IO_H
+#define __SPARC_IO_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ioport.h>  /* struct resource */
+
+#include <asm/page.h>      /* IO address mapping routines need this */
+#include <asm/system.h>
+
+#define page_to_phys(page)	(((page) - mem_map) << PAGE_SHIFT)
+
+static inline u32 flip_dword (u32 l)
+{
+	return ((l&0xff)<<24) | (((l>>8)&0xff)<<16) | (((l>>16)&0xff)<<8)| ((l>>24)&0xff);
+}
+
+static inline u16 flip_word (u16 w)
+{
+	return ((w&0xff) << 8) | ((w>>8)&0xff);
+}
+
+#define mmiowb()
+
+/*
+ * Memory mapped I/O to PCI
+ */
+
+static inline u8 __raw_readb(const volatile void __iomem *addr)
+{
+	return *(__force volatile u8 *)addr;
+}
+
+static inline u16 __raw_readw(const volatile void __iomem *addr)
+{
+	return *(__force volatile u16 *)addr;
+}
+
+static inline u32 __raw_readl(const volatile void __iomem *addr)
+{
+	return *(__force volatile u32 *)addr;
+}
+
+static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
+{
+	*(__force volatile u8 *)addr = b;
+}
+
+static inline void __raw_writew(u16 w, volatile void __iomem *addr)
+{
+	*(__force volatile u16 *)addr = w;
+}
+
+static inline void __raw_writel(u32 l, volatile void __iomem *addr)
+{
+	*(__force volatile u32 *)addr = l;
+}
+
+static inline u8 __readb(const volatile void __iomem *addr)
+{
+	return *(__force volatile u8 *)addr;
+}
+
+static inline u16 __readw(const volatile void __iomem *addr)
+{
+	return flip_word(*(__force volatile u16 *)addr);
+}
+
+static inline u32 __readl(const volatile void __iomem *addr)
+{
+	return flip_dword(*(__force volatile u32 *)addr);
+}
+
+static inline void __writeb(u8 b, volatile void __iomem *addr)
+{
+	*(__force volatile u8 *)addr = b;
+}
+
+static inline void __writew(u16 w, volatile void __iomem *addr)
+{
+	*(__force volatile u16 *)addr = flip_word(w);
+}
+
+static inline void __writel(u32 l, volatile void __iomem *addr)
+{
+	*(__force volatile u32 *)addr = flip_dword(l);
+}
+
+#define readb(__addr)		__readb(__addr)
+#define readw(__addr)		__readw(__addr)
+#define readl(__addr)		__readl(__addr)
+#define readb_relaxed(__addr)	readb(__addr)
+#define readw_relaxed(__addr)	readw(__addr)
+#define readl_relaxed(__addr)	readl(__addr)
+
+#define writeb(__b, __addr)	__writeb((__b),(__addr))
+#define writew(__w, __addr)	__writew((__w),(__addr))
+#define writel(__l, __addr)	__writel((__l),(__addr))
+
+/*
+ * I/O space operations
+ *
+ * Arrangement on a Sun is somewhat complicated.
+ *
+ * First of all, we want to use standard Linux drivers
+ * for keyboard, PC serial, etc. These drivers think
+ * they access I/O space and use inb/outb.
+ * On the other hand, EBus bridge accepts PCI *memory*
+ * cycles and converts them into ISA *I/O* cycles.
+ * Ergo, we want inb & outb to generate PCI memory cycles.
+ *
+ * If we want to issue PCI *I/O* cycles, we do this
+ * with a low 64K fixed window in PCIC. This window gets
+ * mapped somewhere into virtual kernel space and we
+ * can use inb/outb again.
+ */
+#define inb_local(__addr)	__readb((void __iomem *)(unsigned long)(__addr))
+#define inb(__addr)		__readb((void __iomem *)(unsigned long)(__addr))
+#define inw(__addr)		__readw((void __iomem *)(unsigned long)(__addr))
+#define inl(__addr)		__readl((void __iomem *)(unsigned long)(__addr))
+
+#define outb_local(__b, __addr)	__writeb(__b, (void __iomem *)(unsigned long)(__addr))
+#define outb(__b, __addr)	__writeb(__b, (void __iomem *)(unsigned long)(__addr))
+#define outw(__w, __addr)	__writew(__w, (void __iomem *)(unsigned long)(__addr))
+#define outl(__l, __addr)	__writel(__l, (void __iomem *)(unsigned long)(__addr))
+
+#define inb_p(__addr)		inb(__addr)
+#define outb_p(__b, __addr)	outb(__b, __addr)
+#define inw_p(__addr)		inw(__addr)
+#define outw_p(__w, __addr)	outw(__w, __addr)
+#define inl_p(__addr)		inl(__addr)
+#define outl_p(__l, __addr)	outl(__l, __addr)
+
+void outsb(unsigned long addr, const void *src, unsigned long cnt);
+void outsw(unsigned long addr, const void *src, unsigned long cnt);
+void outsl(unsigned long addr, const void *src, unsigned long cnt);
+void insb(unsigned long addr, void *dst, unsigned long count);
+void insw(unsigned long addr, void *dst, unsigned long count);
+void insl(unsigned long addr, void *dst, unsigned long count);
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * SBus accessors.
+ *
+ * SBus has only one, memory mapped, I/O space.
+ * We do not need to flip bytes for SBus of course.
+ */
+static inline u8 _sbus_readb(const volatile void __iomem *addr)
+{
+	return *(__force volatile u8 *)addr;
+}
+
+static inline u16 _sbus_readw(const volatile void __iomem *addr)
+{
+	return *(__force volatile u16 *)addr;
+}
+
+static inline u32 _sbus_readl(const volatile void __iomem *addr)
+{
+	return *(__force volatile u32 *)addr;
+}
+
+static inline void _sbus_writeb(u8 b, volatile void __iomem *addr)
+{
+	*(__force volatile u8 *)addr = b;
+}
+
+static inline void _sbus_writew(u16 w, volatile void __iomem *addr)
+{
+	*(__force volatile u16 *)addr = w;
+}
+
+static inline void _sbus_writel(u32 l, volatile void __iomem *addr)
+{
+	*(__force volatile u32 *)addr = l;
+}
+
+/*
+ * The only reason for #define's is to hide casts to unsigned long.
+ */
+#define sbus_readb(__addr)		_sbus_readb(__addr)
+#define sbus_readw(__addr)		_sbus_readw(__addr)
+#define sbus_readl(__addr)		_sbus_readl(__addr)
+#define sbus_writeb(__b, __addr)	_sbus_writeb(__b, __addr)
+#define sbus_writew(__w, __addr)	_sbus_writew(__w, __addr)
+#define sbus_writel(__l, __addr)	_sbus_writel(__l, __addr)
+
+static inline void sbus_memset_io(volatile void __iomem *__dst, int c, __kernel_size_t n)
+{
+	while(n--) {
+		sbus_writeb(c, __dst);
+		__dst++;
+	}
+}
+
+static inline void
+_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
+{
+	volatile void __iomem *d = dst;
+
+	while (n--) {
+		writeb(c, d);
+		d++;
+	}
+}
+
+#define memset_io(d,c,sz)	_memset_io(d,c,sz)
+
+static inline void
+_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n)
+{
+	char *d = dst;
+
+	while (n--) {
+		char tmp = readb(src);
+		*d++ = tmp;
+		src++;
+	}
+}
+
+#define memcpy_fromio(d,s,sz)	_memcpy_fromio(d,s,sz)
+
+static inline void
+_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n)
+{
+	const char *s = src;
+	volatile void __iomem *d = dst;
+
+	while (n--) {
+		char tmp = *s++;
+		writeb(tmp, d);
+		d++;
+	}
+}
+
+#define memcpy_toio(d,s,sz)	_memcpy_toio(d,s,sz)
+
+#ifdef __KERNEL__
+
+/*
+ * Bus number may be embedded in the higher bits of the physical address.
+ * This is why we have no bus number argument to ioremap().
+ */
+extern void __iomem *ioremap(unsigned long offset, unsigned long size);
+#define ioremap_nocache(X,Y)	ioremap((X),(Y))
+#define ioremap_wc(X,Y)		ioremap((X),(Y))
+extern void iounmap(volatile void __iomem *addr);
+
+#define ioread8(X)			readb(X)
+#define ioread16(X)			readw(X)
+#define ioread32(X)			readl(X)
+#define iowrite8(val,X)			writeb(val,X)
+#define iowrite16(val,X)		writew(val,X)
+#define iowrite32(val,X)		writel(val,X)
+
+static inline void ioread8_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insb((unsigned long __force)port, buf, count);
+}
+static inline void ioread16_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insw((unsigned long __force)port, buf, count);
+}
+
+static inline void ioread32_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insl((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsb((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsw((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsl((unsigned long __force)port, buf, count);
+}
+
+/* Create a virtual mapping cookie for an IO port range */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *);
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+
+/*
+ * Bus number may be in res->flags... somewhere.
+ */
+extern void __iomem *sbus_ioremap(struct resource *res, unsigned long offset,
+    unsigned long size, char *name);
+extern void sbus_iounmap(volatile void __iomem *vaddr, unsigned long size);
+
+
+/*
+ * At the moment, we do not use CMOS_READ anywhere outside of rtc.c,
+ * so rtc_port is static in it. This should not change unless a new
+ * hardware pops up.
+ */
+#define RTC_PORT(x)   (rtc_port + (x))
+#define RTC_ALWAYS_BCD  0
+
+#endif
+
+#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED		1
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* !(__SPARC_IO_H) */
diff --git a/arch/sparc/include/asm/io_64.h b/arch/sparc/include/asm/io_64.h
new file mode 100644
index 000000000000..0bff078ffdd0
--- /dev/null
+++ b/arch/sparc/include/asm/io_64.h
@@ -0,0 +1,511 @@
+#ifndef __SPARC64_IO_H
+#define __SPARC64_IO_H
+
+#include <linux/kernel.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+#include <asm/page.h>      /* IO address mapping routines need this */
+#include <asm/system.h>
+#include <asm/asi.h>
+
+/* PC crapola... */
+#define __SLOW_DOWN_IO	do { } while (0)
+#define SLOW_DOWN_IO	do { } while (0)
+
+/* BIO layer definitions. */
+extern unsigned long kern_base, kern_size;
+#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
+
+static inline u8 _inb(unsigned long addr)
+{
+	u8 ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_inb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u16 _inw(unsigned long addr)
+{
+	u16 ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_inw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u32 _inl(unsigned long addr)
+{
+	u32 ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_inl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline void _outb(u8 b, unsigned long addr)
+{
+	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_outb */"
+			     : /* no outputs */
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+static inline void _outw(u16 w, unsigned long addr)
+{
+	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_outw */"
+			     : /* no outputs */
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+static inline void _outl(u32 l, unsigned long addr)
+{
+	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_outl */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+#define inb(__addr)		(_inb((unsigned long)(__addr)))
+#define inw(__addr)		(_inw((unsigned long)(__addr)))
+#define inl(__addr)		(_inl((unsigned long)(__addr)))
+#define outb(__b, __addr)	(_outb((u8)(__b), (unsigned long)(__addr)))
+#define outw(__w, __addr)	(_outw((u16)(__w), (unsigned long)(__addr)))
+#define outl(__l, __addr)	(_outl((u32)(__l), (unsigned long)(__addr)))
+
+#define inb_p(__addr) 		inb(__addr)
+#define outb_p(__b, __addr)	outb(__b, __addr)
+#define inw_p(__addr)		inw(__addr)
+#define outw_p(__w, __addr)	outw(__w, __addr)
+#define inl_p(__addr)		inl(__addr)
+#define outl_p(__l, __addr)	outl(__l, __addr)
+
+extern void outsb(unsigned long, const void *, unsigned long);
+extern void outsw(unsigned long, const void *, unsigned long);
+extern void outsl(unsigned long, const void *, unsigned long);
+extern void insb(unsigned long, void *, unsigned long);
+extern void insw(unsigned long, void *, unsigned long);
+extern void insl(unsigned long, void *, unsigned long);
+
+static inline void ioread8_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insb((unsigned long __force)port, buf, count);
+}
+static inline void ioread16_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insw((unsigned long __force)port, buf, count);
+}
+
+static inline void ioread32_rep(void __iomem *port, void *buf, unsigned long count)
+{
+	insl((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite8_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsb((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite16_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsw((unsigned long __force)port, buf, count);
+}
+
+static inline void iowrite32_rep(void __iomem *port, const void *buf, unsigned long count)
+{
+	outsl((unsigned long __force)port, buf, count);
+}
+
+/* Memory functions, same as I/O accesses on Ultra. */
+static inline u8 _readb(const volatile void __iomem *addr)
+{	u8 ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_readb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+	return ret;
+}
+
+static inline u16 _readw(const volatile void __iomem *addr)
+{	u16 ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_readw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u32 _readl(const volatile void __iomem *addr)
+{	u32 ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_readl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u64 _readq(const volatile void __iomem *addr)
+{	u64 ret;
+
+	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_readq */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+
+	return ret;
+}
+
+static inline void _writeb(u8 b, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_writeb */"
+			     : /* no outputs */
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+static inline void _writew(u16 w, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_writew */"
+			     : /* no outputs */
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+static inline void _writel(u32 l, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_writel */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+static inline void _writeq(u64 q, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_writeq */"
+			     : /* no outputs */
+			     : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+			     : "memory");
+}
+
+#define readb(__addr)		_readb(__addr)
+#define readw(__addr)		_readw(__addr)
+#define readl(__addr)		_readl(__addr)
+#define readq(__addr)		_readq(__addr)
+#define readb_relaxed(__addr)	_readb(__addr)
+#define readw_relaxed(__addr)	_readw(__addr)
+#define readl_relaxed(__addr)	_readl(__addr)
+#define readq_relaxed(__addr)	_readq(__addr)
+#define writeb(__b, __addr)	_writeb(__b, __addr)
+#define writew(__w, __addr)	_writew(__w, __addr)
+#define writel(__l, __addr)	_writel(__l, __addr)
+#define writeq(__q, __addr)	_writeq(__q, __addr)
+
+/* Now versions without byte-swapping. */
+static inline u8 _raw_readb(unsigned long addr)
+{
+	u8 ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_raw_readb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline u16 _raw_readw(unsigned long addr)
+{
+	u16 ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_raw_readw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline u32 _raw_readl(unsigned long addr)
+{
+	u32 ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_raw_readl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline u64 _raw_readq(unsigned long addr)
+{
+	u64 ret;
+
+	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_raw_readq */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline void _raw_writeb(u8 b, unsigned long addr)
+{
+	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_raw_writeb */"
+			     : /* no outputs */
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _raw_writew(u16 w, unsigned long addr)
+{
+	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_raw_writew */"
+			     : /* no outputs */
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _raw_writel(u32 l, unsigned long addr)
+{
+	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_raw_writel */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _raw_writeq(u64 q, unsigned long addr)
+{
+	__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_raw_writeq */"
+			     : /* no outputs */
+			     : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+#define __raw_readb(__addr)		(_raw_readb((unsigned long)(__addr)))
+#define __raw_readw(__addr)		(_raw_readw((unsigned long)(__addr)))
+#define __raw_readl(__addr)		(_raw_readl((unsigned long)(__addr)))
+#define __raw_readq(__addr)		(_raw_readq((unsigned long)(__addr)))
+#define __raw_writeb(__b, __addr)	(_raw_writeb((u8)(__b), (unsigned long)(__addr)))
+#define __raw_writew(__w, __addr)	(_raw_writew((u16)(__w), (unsigned long)(__addr)))
+#define __raw_writel(__l, __addr)	(_raw_writel((u32)(__l), (unsigned long)(__addr)))
+#define __raw_writeq(__q, __addr)	(_raw_writeq((u64)(__q), (unsigned long)(__addr)))
+
+/* Valid I/O Space regions are anywhere, because each PCI bus supported
+ * can live in an arbitrary area of the physical address range.
+ */
+#define IO_SPACE_LIMIT 0xffffffffffffffffUL
+
+/* Now, SBUS variants, only difference from PCI is that we do
+ * not use little-endian ASIs.
+ */
+static inline u8 _sbus_readb(const volatile void __iomem *addr)
+{
+	u8 ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* sbus_readb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u16 _sbus_readw(const volatile void __iomem *addr)
+{
+	u16 ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* sbus_readw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u32 _sbus_readl(const volatile void __iomem *addr)
+{
+	u32 ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* sbus_readl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+
+	return ret;
+}
+
+static inline u64 _sbus_readq(const volatile void __iomem *addr)
+{
+	u64 ret;
+
+	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* sbus_readq */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+
+	return ret;
+}
+
+static inline void _sbus_writeb(u8 b, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stba\t%r0, [%1] %2\t/* sbus_writeb */"
+			     : /* no outputs */
+			     : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+}
+
+static inline void _sbus_writew(u16 w, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stha\t%r0, [%1] %2\t/* sbus_writew */"
+			     : /* no outputs */
+			     : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+}
+
+static inline void _sbus_writel(u32 l, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* sbus_writel */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+}
+
+static inline void _sbus_writeq(u64 l, volatile void __iomem *addr)
+{
+	__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* sbus_writeq */"
+			     : /* no outputs */
+			     : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+			     : "memory");
+}
+
+#define sbus_readb(__addr)		_sbus_readb(__addr)
+#define sbus_readw(__addr)		_sbus_readw(__addr)
+#define sbus_readl(__addr)		_sbus_readl(__addr)
+#define sbus_readq(__addr)		_sbus_readq(__addr)
+#define sbus_writeb(__b, __addr)	_sbus_writeb(__b, __addr)
+#define sbus_writew(__w, __addr)	_sbus_writew(__w, __addr)
+#define sbus_writel(__l, __addr)	_sbus_writel(__l, __addr)
+#define sbus_writeq(__l, __addr)	_sbus_writeq(__l, __addr)
+
+static inline void _sbus_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
+{
+	while(n--) {
+		sbus_writeb(c, dst);
+		dst++;
+	}
+}
+
+#define sbus_memset_io(d,c,sz)	_sbus_memset_io(d,c,sz)
+
+static inline void
+_memset_io(volatile void __iomem *dst, int c, __kernel_size_t n)
+{
+	volatile void __iomem *d = dst;
+
+	while (n--) {
+		writeb(c, d);
+		d++;
+	}
+}
+
+#define memset_io(d,c,sz)	_memset_io(d,c,sz)
+
+static inline void
+_memcpy_fromio(void *dst, const volatile void __iomem *src, __kernel_size_t n)
+{
+	char *d = dst;
+
+	while (n--) {
+		char tmp = readb(src);
+		*d++ = tmp;
+		src++;
+	}
+}
+
+#define memcpy_fromio(d,s,sz)	_memcpy_fromio(d,s,sz)
+
+static inline void
+_memcpy_toio(volatile void __iomem *dst, const void *src, __kernel_size_t n)
+{
+	const char *s = src;
+	volatile void __iomem *d = dst;
+
+	while (n--) {
+		char tmp = *s++;
+		writeb(tmp, d);
+		d++;
+	}
+}
+
+#define memcpy_toio(d,s,sz)	_memcpy_toio(d,s,sz)
+
+#define mmiowb()
+
+#ifdef __KERNEL__
+
+/* On sparc64 we have the whole physical IO address space accessible
+ * using physically addressed loads and stores, so this does nothing.
+ */
+static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
+{
+	return (void __iomem *)offset;
+}
+
+#define ioremap_nocache(X,Y)		ioremap((X),(Y))
+#define ioremap_wc(X,Y)			ioremap((X),(Y))
+
+static inline void iounmap(volatile void __iomem *addr)
+{
+}
+
+#define ioread8(X)			readb(X)
+#define ioread16(X)			readw(X)
+#define ioread32(X)			readl(X)
+#define iowrite8(val,X)			writeb(val,X)
+#define iowrite16(val,X)		writew(val,X)
+#define iowrite32(val,X)		writel(val,X)
+
+/* Create a virtual mapping cookie for an IO port range */
+extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+extern void ioport_unmap(void __iomem *);
+
+/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
+struct pci_dev;
+extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+
+/* Similarly for SBUS. */
+#define sbus_ioremap(__res, __offset, __size, __name) \
+({	unsigned long __ret; \
+	__ret  = (__res)->start + (((__res)->flags & 0x1ffUL) << 32UL); \
+	__ret += (unsigned long) (__offset); \
+	if (! request_region((__ret), (__size), (__name))) \
+		__ret = 0UL; \
+	(void __iomem *) __ret; \
+})
+
+#define sbus_iounmap(__addr, __size)	\
+	release_region((unsigned long)(__addr), (__size))
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif
+
+#endif /* !(__SPARC64_IO_H) */
diff --git a/arch/sparc/include/asm/ioctl.h b/arch/sparc/include/asm/ioctl.h
new file mode 100644
index 000000000000..7d6bd51321b9
--- /dev/null
+++ b/arch/sparc/include/asm/ioctl.h
@@ -0,0 +1,67 @@
+#ifndef _SPARC_IOCTL_H
+#define _SPARC_IOCTL_H
+
+/*
+ * Our DIR and SIZE overlap in order to simulteneously provide
+ * a non-zero _IOC_NONE (for binary compatibility) and
+ * 14 bits of size as on i386. Here's the layout:
+ *
+ *   0xE0000000   DIR
+ *   0x80000000     DIR = WRITE
+ *   0x40000000     DIR = READ
+ *   0x20000000     DIR = NONE
+ *   0x3FFF0000   SIZE (overlaps NONE bit)
+ *   0x0000FF00   TYPE
+ *   0x000000FF   NR (CMD)
+ */
+
+#define _IOC_NRBITS      8
+#define _IOC_TYPEBITS    8
+#define _IOC_SIZEBITS   13	/* Actually 14, see below. */
+#define _IOC_DIRBITS     3
+
+#define _IOC_NRMASK      ((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK    ((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK    ((1 << _IOC_SIZEBITS)-1)
+#define _IOC_XSIZEMASK   ((1 << (_IOC_SIZEBITS+1))-1)
+#define _IOC_DIRMASK     ((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT     0
+#define _IOC_TYPESHIFT   (_IOC_NRSHIFT + _IOC_NRBITS)
+#define _IOC_SIZESHIFT   (_IOC_TYPESHIFT + _IOC_TYPEBITS)
+#define _IOC_DIRSHIFT    (_IOC_SIZESHIFT + _IOC_SIZEBITS)
+
+#define _IOC_NONE        1U
+#define _IOC_READ        2U
+#define _IOC_WRITE       4U
+
+#define _IOC(dir,type,nr,size) \
+        (((dir)  << _IOC_DIRSHIFT) | \
+         ((type) << _IOC_TYPESHIFT) | \
+         ((nr)   << _IOC_NRSHIFT) | \
+         ((size) << _IOC_SIZESHIFT))
+
+#define _IO(type,nr)        _IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)  _IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)  _IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* Used to decode ioctl numbers in drivers despite the leading underscore... */
+#define _IOC_DIR(nr)    \
+ ( (((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) != 0)?   \
+                            (((nr) >> _IOC_DIRSHIFT) & (_IOC_WRITE|_IOC_READ)):  \
+                            (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) )
+#define _IOC_TYPE(nr)       (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)         (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)   \
+ ((((((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) & (_IOC_WRITE|_IOC_READ)) == 0)?    \
+                         0: (((nr) >> _IOC_SIZESHIFT) & _IOC_XSIZEMASK))
+
+/* ...and for the PCMCIA and sound. */
+#define IOC_IN          (_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT         (_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT       ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK    (_IOC_XSIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT   (_IOC_SIZESHIFT)
+
+#endif /* !(_SPARC_IOCTL_H) */
diff --git a/arch/sparc/include/asm/ioctls.h b/arch/sparc/include/asm/ioctls.h
new file mode 100644
index 000000000000..1fe6855c5c18
--- /dev/null
+++ b/arch/sparc/include/asm/ioctls.h
@@ -0,0 +1,136 @@
+#ifndef _ASM_SPARC_IOCTLS_H
+#define _ASM_SPARC_IOCTLS_H
+
+#include <asm/ioctl.h>
+
+/* Big T */
+#define TCGETA		_IOR('T', 1, struct termio)
+#define TCSETA		_IOW('T', 2, struct termio)
+#define TCSETAW		_IOW('T', 3, struct termio)
+#define TCSETAF		_IOW('T', 4, struct termio)
+#define TCSBRK		_IO('T', 5)
+#define TCXONC		_IO('T', 6)
+#define TCFLSH		_IO('T', 7)
+#define TCGETS		_IOR('T', 8, struct termios)
+#define TCSETS		_IOW('T', 9, struct termios)
+#define TCSETSW		_IOW('T', 10, struct termios)
+#define TCSETSF		_IOW('T', 11, struct termios)
+#define TCGETS2		_IOR('T', 12, struct termios2)
+#define TCSETS2		_IOW('T', 13, struct termios2)
+#define TCSETSW2	_IOW('T', 14, struct termios2)
+#define TCSETSF2	_IOW('T', 15, struct termios2)
+
+/* Note that all the ioctls that are not available in Linux have a 
+ * double underscore on the front to: a) avoid some programs to
+ * think we support some ioctls under Linux (autoconfiguration stuff)
+ */
+/* Little t */
+#define TIOCGETD	_IOR('t', 0, int)
+#define TIOCSETD	_IOW('t', 1, int)
+#define __TIOCHPCL        _IO('t', 2) /* SunOS Specific */
+#define __TIOCMODG        _IOR('t', 3, int) /* SunOS Specific */
+#define __TIOCMODS        _IOW('t', 4, int) /* SunOS Specific */
+#define __TIOCGETP        _IOR('t', 8, struct sgttyb) /* SunOS Specific */
+#define __TIOCSETP        _IOW('t', 9, struct sgttyb) /* SunOS Specific */
+#define __TIOCSETN        _IOW('t', 10, struct sgttyb) /* SunOS Specific */
+#define TIOCEXCL	_IO('t', 13)
+#define TIOCNXCL	_IO('t', 14)
+#define __TIOCFLUSH       _IOW('t', 16, int) /* SunOS Specific */
+#define __TIOCSETC        _IOW('t', 17, struct tchars) /* SunOS Specific */
+#define __TIOCGETC        _IOR('t', 18, struct tchars) /* SunOS Specific */
+#define __TIOCTCNTL       _IOW('t', 32, int) /* SunOS Specific */
+#define __TIOCSIGNAL      _IOW('t', 33, int) /* SunOS Specific */
+#define __TIOCSETX        _IOW('t', 34, int) /* SunOS Specific */
+#define __TIOCGETX        _IOR('t', 35, int) /* SunOS Specific */
+#define TIOCCONS	_IO('t', 36)
+#define TIOCGSOFTCAR	_IOR('t', 100, int)
+#define TIOCSSOFTCAR	_IOW('t', 101, int)
+#define __TIOCUCNTL       _IOW('t', 102, int) /* SunOS Specific */
+#define TIOCSWINSZ	_IOW('t', 103, struct winsize)
+#define TIOCGWINSZ	_IOR('t', 104, struct winsize)
+#define __TIOCREMOTE      _IOW('t', 105, int) /* SunOS Specific */
+#define TIOCMGET	_IOR('t', 106, int)
+#define TIOCMBIC	_IOW('t', 107, int)
+#define TIOCMBIS	_IOW('t', 108, int)
+#define TIOCMSET	_IOW('t', 109, int)
+#define TIOCSTART       _IO('t', 110)
+#define TIOCSTOP        _IO('t', 111)
+#define TIOCPKT		_IOW('t', 112, int)
+#define TIOCNOTTY	_IO('t', 113)
+#define TIOCSTI		_IOW('t', 114, char)
+#define TIOCOUTQ	_IOR('t', 115, int)
+#define __TIOCGLTC        _IOR('t', 116, struct ltchars) /* SunOS Specific */
+#define __TIOCSLTC        _IOW('t', 117, struct ltchars) /* SunOS Specific */
+/* 118 is the non-posix setpgrp tty ioctl */
+/* 119 is the non-posix getpgrp tty ioctl */
+#define __TIOCCDTR        _IO('t', 120) /* SunOS Specific */
+#define __TIOCSDTR        _IO('t', 121) /* SunOS Specific */
+#define TIOCCBRK        _IO('t', 122)
+#define TIOCSBRK        _IO('t', 123)
+#define __TIOCLGET        _IOW('t', 124, int) /* SunOS Specific */
+#define __TIOCLSET        _IOW('t', 125, int) /* SunOS Specific */
+#define __TIOCLBIC        _IOW('t', 126, int) /* SunOS Specific */
+#define __TIOCLBIS        _IOW('t', 127, int) /* SunOS Specific */
+#define __TIOCISPACE      _IOR('t', 128, int) /* SunOS Specific */
+#define __TIOCISIZE       _IOR('t', 129, int) /* SunOS Specific */
+#define TIOCSPGRP	_IOW('t', 130, int)
+#define TIOCGPGRP	_IOR('t', 131, int)
+#define TIOCSCTTY	_IO('t', 132)
+#define TIOCGSID	_IOR('t', 133, int)
+/* Get minor device of a pty master's FD -- Solaris equiv is ISPTM */
+#define TIOCGPTN	_IOR('t', 134, unsigned int) /* Get Pty Number */
+#define TIOCSPTLCK	_IOW('t', 135, int) /* Lock/unlock PTY */
+
+/* Little f */
+#define FIOCLEX		_IO('f', 1)
+#define FIONCLEX	_IO('f', 2)
+#define FIOASYNC	_IOW('f', 125, int)
+#define FIONBIO		_IOW('f', 126, int)
+#define FIONREAD	_IOR('f', 127, int)
+#define TIOCINQ		FIONREAD
+#define FIOQSIZE	_IOR('f', 128, loff_t)
+
+/* SCARY Rutgers local SunOS kernel hackery, perhaps I will support it
+ * someday.  This is completely bogus, I know...
+ */
+#define __TCGETSTAT       _IO('T', 200) /* Rutgers specific */
+#define __TCSETSTAT       _IO('T', 201) /* Rutgers specific */
+
+/* Linux specific, no SunOS equivalent. */
+#define TIOCLINUX	0x541C
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TCSBRKP		0x5425
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+#define TIOCMIWAIT	0x545C /* Wait for change on serial input line(s) */
+#define TIOCGICOUNT	0x545D /* Read serial port inline interrupt counts */
+
+/* Kernel definitions */
+#ifdef __KERNEL__
+#define TIOCGETC __TIOCGETC
+#define TIOCGETP __TIOCGETP
+#define TIOCGLTC __TIOCGLTC
+#define TIOCSLTC __TIOCSLTC
+#define TIOCSETP __TIOCSETP
+#define TIOCSETN __TIOCSETN
+#define TIOCSETC __TIOCSETC
+#endif
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#endif /* !(_ASM_SPARC_IOCTLS_H) */
diff --git a/arch/sparc/include/asm/iommu.h b/arch/sparc/include/asm/iommu.h
new file mode 100644
index 000000000000..e650965b4a8d
--- /dev/null
+++ b/arch/sparc/include/asm/iommu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IOMMU_H
+#define ___ASM_SPARC_IOMMU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/iommu_64.h>
+#else
+#include <asm/iommu_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/iommu_32.h b/arch/sparc/include/asm/iommu_32.h
new file mode 100644
index 000000000000..70c589c05a10
--- /dev/null
+++ b/arch/sparc/include/asm/iommu_32.h
@@ -0,0 +1,121 @@
+/* iommu.h: Definitions for the sun4m IOMMU.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_IOMMU_H
+#define _SPARC_IOMMU_H
+
+#include <asm/page.h>
+#include <asm/bitext.h>
+
+/* The iommu handles all virtual to physical address translations
+ * that occur between the SBUS and physical memory.  Access by
+ * the cpu to IO registers and similar go over the mbus so are
+ * translated by the on chip SRMMU.  The iommu and the srmmu do
+ * not need to have the same translations at all, in fact most
+ * of the time the translations they handle are a disjunct set.
+ * Basically the iommu handles all dvma sbus activity.
+ */
+
+/* The IOMMU registers occupy three pages in IO space. */
+struct iommu_regs {
+	/* First page */
+	volatile unsigned long control;    /* IOMMU control */
+	volatile unsigned long base;       /* Physical base of iopte page table */
+	volatile unsigned long _unused1[3];
+	volatile unsigned long tlbflush;   /* write only */
+	volatile unsigned long pageflush;  /* write only */
+	volatile unsigned long _unused2[1017];
+	/* Second page */
+	volatile unsigned long afsr;       /* Async-fault status register */
+	volatile unsigned long afar;       /* Async-fault physical address */
+	volatile unsigned long _unused3[2];
+	volatile unsigned long sbuscfg0;   /* SBUS configuration registers, per-slot */
+	volatile unsigned long sbuscfg1;
+	volatile unsigned long sbuscfg2;
+	volatile unsigned long sbuscfg3;
+	volatile unsigned long mfsr;       /* Memory-fault status register */
+	volatile unsigned long mfar;       /* Memory-fault physical address */
+	volatile unsigned long _unused4[1014];
+	/* Third page */
+	volatile unsigned long mid;        /* IOMMU module-id */
+};
+
+#define IOMMU_CTRL_IMPL     0xf0000000 /* Implementation */
+#define IOMMU_CTRL_VERS     0x0f000000 /* Version */
+#define IOMMU_CTRL_RNGE     0x0000001c /* Mapping RANGE */
+#define IOMMU_RNGE_16MB     0x00000000 /* 0xff000000 -> 0xffffffff */
+#define IOMMU_RNGE_32MB     0x00000004 /* 0xfe000000 -> 0xffffffff */
+#define IOMMU_RNGE_64MB     0x00000008 /* 0xfc000000 -> 0xffffffff */
+#define IOMMU_RNGE_128MB    0x0000000c /* 0xf8000000 -> 0xffffffff */
+#define IOMMU_RNGE_256MB    0x00000010 /* 0xf0000000 -> 0xffffffff */
+#define IOMMU_RNGE_512MB    0x00000014 /* 0xe0000000 -> 0xffffffff */
+#define IOMMU_RNGE_1GB      0x00000018 /* 0xc0000000 -> 0xffffffff */
+#define IOMMU_RNGE_2GB      0x0000001c /* 0x80000000 -> 0xffffffff */
+#define IOMMU_CTRL_ENAB     0x00000001 /* IOMMU Enable */
+
+#define IOMMU_AFSR_ERR      0x80000000 /* LE, TO, or BE asserted */
+#define IOMMU_AFSR_LE       0x40000000 /* SBUS reports error after transaction */
+#define IOMMU_AFSR_TO       0x20000000 /* Write access took more than 12.8 us. */
+#define IOMMU_AFSR_BE       0x10000000 /* Write access received error acknowledge */
+#define IOMMU_AFSR_SIZE     0x0e000000 /* Size of transaction causing error */
+#define IOMMU_AFSR_S        0x01000000 /* Sparc was in supervisor mode */
+#define IOMMU_AFSR_RESV     0x00f00000 /* Reserver, forced to 0x8 by hardware */
+#define IOMMU_AFSR_ME       0x00080000 /* Multiple errors occurred */
+#define IOMMU_AFSR_RD       0x00040000 /* A read operation was in progress */
+#define IOMMU_AFSR_FAV      0x00020000 /* IOMMU afar has valid contents */
+
+#define IOMMU_SBCFG_SAB30   0x00010000 /* Phys-address bit 30 when bypass enabled */
+#define IOMMU_SBCFG_BA16    0x00000004 /* Slave supports 16 byte bursts */
+#define IOMMU_SBCFG_BA8     0x00000002 /* Slave supports 8 byte bursts */
+#define IOMMU_SBCFG_BYPASS  0x00000001 /* Bypass IOMMU, treat all addresses
+					  produced by this device as pure
+					  physical. */
+
+#define IOMMU_MFSR_ERR      0x80000000 /* One or more of PERR1 or PERR0 */
+#define IOMMU_MFSR_S        0x01000000 /* Sparc was in supervisor mode */
+#define IOMMU_MFSR_CPU      0x00800000 /* CPU transaction caused parity error */
+#define IOMMU_MFSR_ME       0x00080000 /* Multiple parity errors occurred */
+#define IOMMU_MFSR_PERR     0x00006000 /* high bit indicates parity error occurred
+					  on the even word of the access, low bit
+					  indicated odd word caused the parity error */
+#define IOMMU_MFSR_BM       0x00001000 /* Error occurred while in boot mode */
+#define IOMMU_MFSR_C        0x00000800 /* Address causing error was marked cacheable */
+#define IOMMU_MFSR_RTYP     0x000000f0 /* Memory request transaction type */
+
+#define IOMMU_MID_SBAE      0x001f0000 /* SBus arbitration enable */
+#define IOMMU_MID_SE        0x00100000 /* Enables SCSI/ETHERNET arbitration */
+#define IOMMU_MID_SB3       0x00080000 /* Enable SBUS device 3 arbitration */
+#define IOMMU_MID_SB2       0x00040000 /* Enable SBUS device 2 arbitration */
+#define IOMMU_MID_SB1       0x00020000 /* Enable SBUS device 1 arbitration */
+#define IOMMU_MID_SB0       0x00010000 /* Enable SBUS device 0 arbitration */
+#define IOMMU_MID_MID       0x0000000f /* Module-id, hardcoded to 0x8 */
+
+/* The format of an iopte in the page tables */
+#define IOPTE_PAGE          0x07ffff00 /* Physical page number (PA[30:12]) */
+#define IOPTE_CACHE         0x00000080 /* Cached (in vme IOCACHE or Viking/MXCC) */
+#define IOPTE_WRITE         0x00000004 /* Writeable */
+#define IOPTE_VALID         0x00000002 /* IOPTE is valid */
+#define IOPTE_WAZ           0x00000001 /* Write as zeros */
+
+struct iommu_struct {
+	struct iommu_regs *regs;
+	iopte_t *page_table;
+	/* For convenience */
+	unsigned long start; /* First managed virtual address */
+	unsigned long end;   /* Last managed virtual address */
+
+	struct bit_map usemap;
+};
+
+static inline void iommu_invalidate(struct iommu_regs *regs)
+{
+	regs->tlbflush = 0;
+}
+
+static inline void iommu_invalidate_page(struct iommu_regs *regs, unsigned long ba)
+{
+	regs->pageflush = (ba & PAGE_MASK);
+}
+
+#endif /* !(_SPARC_IOMMU_H) */
diff --git a/arch/sparc/include/asm/iommu_64.h b/arch/sparc/include/asm/iommu_64.h
new file mode 100644
index 000000000000..d7b9afcba08b
--- /dev/null
+++ b/arch/sparc/include/asm/iommu_64.h
@@ -0,0 +1,62 @@
+/* iommu.h: Definitions for the sun5 IOMMU.
+ *
+ * Copyright (C) 1996, 1999, 2007 David S. Miller (davem@davemloft.net)
+ */
+#ifndef _SPARC64_IOMMU_H
+#define _SPARC64_IOMMU_H
+
+/* The format of an iopte in the page tables. */
+#define IOPTE_VALID   0x8000000000000000UL
+#define IOPTE_64K     0x2000000000000000UL
+#define IOPTE_STBUF   0x1000000000000000UL
+#define IOPTE_INTRA   0x0800000000000000UL
+#define IOPTE_CONTEXT 0x07ff800000000000UL
+#define IOPTE_PAGE    0x00007fffffffe000UL
+#define IOPTE_CACHE   0x0000000000000010UL
+#define IOPTE_WRITE   0x0000000000000002UL
+
+#define IOMMU_NUM_CTXS	4096
+
+struct iommu_arena {
+	unsigned long	*map;
+	unsigned int	hint;
+	unsigned int	limit;
+};
+
+struct iommu {
+	spinlock_t		lock;
+	struct iommu_arena	arena;
+	void			(*flush_all)(struct iommu *);
+	iopte_t			*page_table;
+	u32			page_table_map_base;
+	unsigned long		iommu_control;
+	unsigned long		iommu_tsbbase;
+	unsigned long		iommu_flush;
+	unsigned long		iommu_flushinv;
+	unsigned long		iommu_tags;
+	unsigned long		iommu_ctxflush;
+	unsigned long		write_complete_reg;
+	unsigned long		dummy_page;
+	unsigned long		dummy_page_pa;
+	unsigned long		ctx_lowest_free;
+	DECLARE_BITMAP(ctx_bitmap, IOMMU_NUM_CTXS);
+	u32			dma_addr_mask;
+};
+
+struct strbuf {
+	int			strbuf_enabled;
+	unsigned long		strbuf_control;
+	unsigned long		strbuf_pflush;
+	unsigned long		strbuf_fsync;
+	unsigned long		strbuf_ctxflush;
+	unsigned long		strbuf_ctxmatch_base;
+	unsigned long		strbuf_flushflag_pa;
+	volatile unsigned long *strbuf_flushflag;
+	volatile unsigned long	__flushflag_buf[(64+(64-1)) / sizeof(long)];
+};
+
+extern int iommu_table_init(struct iommu *iommu, int tsbsize,
+			    u32 dma_offset, u32 dma_addr_mask,
+			    int numa_node);
+
+#endif /* !(_SPARC64_IOMMU_H) */
diff --git a/arch/sparc/include/asm/ipcbuf.h b/arch/sparc/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..17d6ef7b23a4
--- /dev/null
+++ b/arch/sparc/include/asm/ipcbuf.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IPCBUF_H
+#define ___ASM_SPARC_IPCBUF_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ipcbuf_64.h>
+#else
+#include <asm/ipcbuf_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/ipcbuf_32.h b/arch/sparc/include/asm/ipcbuf_32.h
new file mode 100644
index 000000000000..6387209518f2
--- /dev/null
+++ b/arch/sparc/include/asm/ipcbuf_32.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC_IPCBUF_H
+#define _SPARC_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values (so that this structure matches
+ *				    sparc64 ipc64_perm)
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	unsigned short		__pad1;
+	__kernel_mode_t		mode;
+	unsigned short		__pad2;
+	unsigned short		seq;
+	unsigned long long	__unused1;
+	unsigned long long	__unused2;
+};
+
+#endif /* _SPARC_IPCBUF_H */
diff --git a/arch/sparc/include/asm/ipcbuf_64.h b/arch/sparc/include/asm/ipcbuf_64.h
new file mode 100644
index 000000000000..a44b855b98db
--- /dev/null
+++ b/arch/sparc/include/asm/ipcbuf_64.h
@@ -0,0 +1,28 @@
+#ifndef _SPARC64_IPCBUF_H
+#define _SPARC64_IPCBUF_H
+
+/*
+ * The ipc64_perm structure for sparc64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit seq
+ * - 2 miscellaneous 64-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t	key;
+	__kernel_uid_t	uid;
+	__kernel_gid_t	gid;
+	__kernel_uid_t	cuid;
+	__kernel_gid_t	cgid;
+	__kernel_mode_t	mode;
+	unsigned short	__pad1;
+	unsigned short	seq;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+
+#endif /* _SPARC64_IPCBUF_H */
diff --git a/arch/sparc/include/asm/irq.h b/arch/sparc/include/asm/irq.h
new file mode 100644
index 000000000000..3b44a6a14074
--- /dev/null
+++ b/arch/sparc/include/asm/irq.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IRQ_H
+#define ___ASM_SPARC_IRQ_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/irq_64.h>
+#else
+#include <asm/irq_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/irq_32.h b/arch/sparc/include/asm/irq_32.h
new file mode 100644
index 000000000000..fe205cc444b8
--- /dev/null
+++ b/arch/sparc/include/asm/irq_32.h
@@ -0,0 +1,15 @@
+/* irq.h: IRQ registers on the Sparc.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC_IRQ_H
+#define _SPARC_IRQ_H
+
+#include <linux/interrupt.h>
+
+#define NR_IRQS    16
+
+#define irq_canonicalize(irq)	(irq)
+
+#endif
diff --git a/arch/sparc/include/asm/irq_64.h b/arch/sparc/include/asm/irq_64.h
new file mode 100644
index 000000000000..3473e25231d9
--- /dev/null
+++ b/arch/sparc/include/asm/irq_64.h
@@ -0,0 +1,96 @@
+/* irq.h: IRQ registers on the 64-bit Sparc.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
+ */
+
+#ifndef _SPARC64_IRQ_H
+#define _SPARC64_IRQ_H
+
+#include <linux/linkage.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <asm/pil.h>
+#include <asm/ptrace.h>
+
+/* IMAP/ICLR register defines */
+#define IMAP_VALID		0x80000000UL	/* IRQ Enabled		*/
+#define IMAP_TID_UPA		0x7c000000UL	/* UPA TargetID		*/
+#define IMAP_TID_JBUS		0x7c000000UL	/* JBUS TargetID	*/
+#define IMAP_TID_SHIFT		26
+#define IMAP_AID_SAFARI		0x7c000000UL	/* Safari AgentID	*/
+#define IMAP_AID_SHIFT		26
+#define IMAP_NID_SAFARI		0x03e00000UL	/* Safari NodeID	*/
+#define IMAP_NID_SHIFT		21
+#define IMAP_IGN		0x000007c0UL	/* IRQ Group Number	*/
+#define IMAP_INO		0x0000003fUL	/* IRQ Number		*/
+#define IMAP_INR		0x000007ffUL	/* Full interrupt number*/
+
+#define ICLR_IDLE		0x00000000UL	/* Idle state		*/
+#define ICLR_TRANSMIT		0x00000001UL	/* Transmit state	*/
+#define ICLR_PENDING		0x00000003UL	/* Pending state	*/
+
+/* The largest number of unique interrupt sources we support.
+ * If this needs to ever be larger than 255, you need to change
+ * the type of ino_bucket->virt_irq as appropriate.
+ *
+ * ino_bucket->virt_irq allocation is made during {sun4v_,}build_irq().
+ */
+#define NR_IRQS    255
+
+extern void irq_install_pre_handler(int virt_irq,
+				    void (*func)(unsigned int, void *, void *),
+				    void *arg1, void *arg2);
+#define irq_canonicalize(irq)	(irq)
+extern unsigned int build_irq(int inofixup, unsigned long iclr, unsigned long imap);
+extern unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino);
+extern unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino);
+extern unsigned int sun4v_build_msi(u32 devhandle, unsigned int *virt_irq_p,
+				    unsigned int msi_devino_start,
+				    unsigned int msi_devino_end);
+extern void sun4v_destroy_msi(unsigned int virt_irq);
+extern unsigned int sun4u_build_msi(u32 portid, unsigned int *virt_irq_p,
+				    unsigned int msi_devino_start,
+				    unsigned int msi_devino_end,
+				    unsigned long imap_base,
+				    unsigned long iclr_base);
+extern void sun4u_destroy_msi(unsigned int virt_irq);
+extern unsigned int sbus_build_irq(void *sbus, unsigned int ino);
+
+extern unsigned char virt_irq_alloc(unsigned int dev_handle,
+				    unsigned int dev_ino);
+#ifdef CONFIG_PCI_MSI
+extern void virt_irq_free(unsigned int virt_irq);
+#endif
+
+extern void __init init_IRQ(void);
+extern void fixup_irqs(void);
+
+static inline void set_softint(unsigned long bits)
+{
+	__asm__ __volatile__("wr	%0, 0x0, %%set_softint"
+			     : /* No outputs */
+			     : "r" (bits));
+}
+
+static inline void clear_softint(unsigned long bits)
+{
+	__asm__ __volatile__("wr	%0, 0x0, %%clear_softint"
+			     : /* No outputs */
+			     : "r" (bits));
+}
+
+static inline unsigned long get_softint(void)
+{
+	unsigned long retval;
+
+	__asm__ __volatile__("rd	%%softint, %0"
+			     : "=r" (retval));
+	return retval;
+}
+
+void __trigger_all_cpu_backtrace(void);
+#define trigger_all_cpu_backtrace() __trigger_all_cpu_backtrace()
+
+#endif
diff --git a/arch/sparc/include/asm/irq_regs.h b/arch/sparc/include/asm/irq_regs.h
new file mode 100644
index 000000000000..3dd9c0b70270
--- /dev/null
+++ b/arch/sparc/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/sparc/include/asm/irqflags.h b/arch/sparc/include/asm/irqflags.h
new file mode 100644
index 000000000000..1e138632bd3f
--- /dev/null
+++ b/arch/sparc/include/asm/irqflags.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_IRQFLAGS_H
+#define ___ASM_SPARC_IRQFLAGS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/irqflags_64.h>
+#else
+#include <asm/irqflags_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/irqflags_32.h b/arch/sparc/include/asm/irqflags_32.h
new file mode 100644
index 000000000000..0fca9d97d44f
--- /dev/null
+++ b/arch/sparc/include/asm/irqflags_32.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm/irqflags.h
+ *
+ * IRQ flags handling
+ *
+ * This file gets included from lowlevel asm headers too, to provide
+ * wrapped versions of the local_irq_*() APIs, based on the
+ * raw_local_irq_*() functions from the lowlevel headers.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+extern void raw_local_irq_restore(unsigned long);
+extern unsigned long __raw_local_irq_save(void);
+extern void raw_local_irq_enable(void);
+
+static inline unsigned long getipl(void)
+{
+        unsigned long retval;
+
+        __asm__ __volatile__("rd        %%psr, %0" : "=r" (retval));
+        return retval;
+}
+
+#define raw_local_save_flags(flags) ((flags) = getipl())
+#define raw_local_irq_save(flags)   ((flags) = __raw_local_irq_save())
+#define raw_local_irq_disable()     ((void) __raw_local_irq_save())
+#define raw_irqs_disabled()         ((getipl() & PSR_PIL) != 0)
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+        return ((flags & PSR_PIL) != 0);
+}
+
+#endif /* (__ASSEMBLY__) */
+
+#endif /* !(_ASM_IRQFLAGS_H) */
diff --git a/arch/sparc/include/asm/irqflags_64.h b/arch/sparc/include/asm/irqflags_64.h
new file mode 100644
index 000000000000..bb42e59162aa
--- /dev/null
+++ b/arch/sparc/include/asm/irqflags_64.h
@@ -0,0 +1,89 @@
+/*
+ * include/asm/irqflags.h
+ *
+ * IRQ flags handling
+ *
+ * This file gets included from lowlevel asm headers too, to provide
+ * wrapped versions of the local_irq_*() APIs, based on the
+ * raw_local_irq_*() functions from the lowlevel headers.
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long __raw_local_save_flags(void)
+{
+	unsigned long flags;
+
+	__asm__ __volatile__(
+		"rdpr	%%pil, %0"
+		: "=r" (flags)
+	);
+
+	return flags;
+}
+
+#define raw_local_save_flags(flags) \
+		do { (flags) = __raw_local_save_flags(); } while (0)
+
+static inline void raw_local_irq_restore(unsigned long flags)
+{
+	__asm__ __volatile__(
+		"wrpr	%0, %%pil"
+		: /* no output */
+		: "r" (flags)
+		: "memory"
+	);
+}
+
+static inline void raw_local_irq_disable(void)
+{
+	__asm__ __volatile__(
+		"wrpr	15, %%pil"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory"
+	);
+}
+
+static inline void raw_local_irq_enable(void)
+{
+	__asm__ __volatile__(
+		"wrpr	0, %%pil"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory"
+	);
+}
+
+static inline int raw_irqs_disabled_flags(unsigned long flags)
+{
+	return (flags > 0);
+}
+
+static inline int raw_irqs_disabled(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	return raw_irqs_disabled_flags(flags);
+}
+
+/*
+ * For spinlocks, etc:
+ */
+static inline unsigned long __raw_local_irq_save(void)
+{
+	unsigned long flags = __raw_local_save_flags();
+
+	raw_local_irq_disable();
+
+	return flags;
+}
+
+#define raw_local_irq_save(flags) \
+		do { (flags) = __raw_local_irq_save(); } while (0)
+
+#endif /* (__ASSEMBLY__) */
+
+#endif /* !(_ASM_IRQFLAGS_H) */
diff --git a/arch/sparc/include/asm/jsflash.h b/arch/sparc/include/asm/jsflash.h
new file mode 100644
index 000000000000..3457f29bd73b
--- /dev/null
+++ b/arch/sparc/include/asm/jsflash.h
@@ -0,0 +1,39 @@
+/*
+ * jsflash.h: OS Flash SIMM support for JavaStations.
+ *
+ * Copyright (C) 1999  Pete Zaitcev
+ */
+
+#ifndef _SPARC_JSFLASH_H
+#define _SPARC_JSFLASH_H
+
+#ifndef _SPARC_TYPES_H
+#include <asm/types.h>
+#endif
+
+/*
+ * Semantics of the offset is a full address.
+ * Hardcode it or get it from probe ioctl.
+ *
+ * We use full bus address, so that we would be
+ * automatically compatible with possible future systems.
+ */
+
+#define JSFLASH_IDENT   (('F'<<8)|54)
+struct jsflash_ident_arg {
+	__u64 off;                /* 0x20000000 is included */
+	__u32 size;
+	char name[32];		/* With trailing zero */
+};
+
+#define JSFLASH_ERASE   (('F'<<8)|55)
+/* Put 0 as argument, may be flags or sector number... */
+
+#define JSFLASH_PROGRAM (('F'<<8)|56)
+struct jsflash_program_arg {
+	__u64 data;		/* char* for sparc and sparc64 */
+	__u64 off;
+	__u32 size;
+};
+
+#endif /* _SPARC_JSFLASH_H */
diff --git a/arch/sparc/include/asm/kdebug.h b/arch/sparc/include/asm/kdebug.h
new file mode 100644
index 000000000000..8d12581ca386
--- /dev/null
+++ b/arch/sparc/include/asm/kdebug.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_KDEBUG_H
+#define ___ASM_SPARC_KDEBUG_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/kdebug_64.h>
+#else
+#include <asm/kdebug_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/kdebug_32.h b/arch/sparc/include/asm/kdebug_32.h
new file mode 100644
index 000000000000..f69fe7d84b3c
--- /dev/null
+++ b/arch/sparc/include/asm/kdebug_32.h
@@ -0,0 +1,73 @@
+/*
+ * kdebug.h:  Defines and definitions for debugging the Linux kernel
+ *            under various kernel debuggers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_KDEBUG_H
+#define _SPARC_KDEBUG_H
+
+#include <asm/openprom.h>
+#include <asm/vaddrs.h>
+
+/* Breakpoints are enter through trap table entry 126.  So in sparc assembly
+ * if you want to drop into the debugger you do:
+ *
+ * t DEBUG_BP_TRAP
+ */
+
+#define DEBUG_BP_TRAP     126
+
+#ifndef __ASSEMBLY__
+/* The debug vector is passed in %o1 at boot time.  It is a pointer to
+ * a structure in the debuggers address space.  Here is its format.
+ */
+
+typedef unsigned int (*debugger_funct)(void);
+
+struct kernel_debug {
+	/* First the entry point into the debugger.  You jump here
+	 * to give control over to the debugger.
+	 */
+	unsigned long kdebug_entry;
+	unsigned long kdebug_trapme;   /* Figure out later... */
+	/* The following is the number of pages that the debugger has
+	 * taken from to total pool.
+	 */
+	unsigned long *kdebug_stolen_pages;
+	/* Ok, after you remap yourself and/or change the trap table
+	 * from what you were left with at boot time you have to call
+	 * this synchronization function so the debugger can check out
+	 * what you have done.
+	 */
+	debugger_funct teach_debugger;
+}; /* I think that is it... */
+
+extern struct kernel_debug *linux_dbvec;
+
+/* Use this macro in C-code to enter the debugger. */
+static inline void sp_enter_debugger(void)
+{
+	__asm__ __volatile__("jmpl %0, %%o7\n\t"
+			     "nop\n\t" : :
+			     "r" (linux_dbvec) : "o7", "memory");
+}
+
+#define SP_ENTER_DEBUGGER do { \
+	     if((linux_dbvec!=0) && ((*(short *)linux_dbvec)!=-1)) \
+	       sp_enter_debugger(); \
+		       } while(0)
+
+enum die_val {
+	DIE_UNUSED,
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+/* Some nice offset defines for assembler code. */
+#define KDEBUG_ENTRY_OFF    0x0
+#define KDEBUG_DUNNO_OFF    0x4
+#define KDEBUG_DUNNO2_OFF   0x8
+#define KDEBUG_TEACH_OFF    0xc
+
+#endif /* !(_SPARC_KDEBUG_H) */
diff --git a/arch/sparc/include/asm/kdebug_64.h b/arch/sparc/include/asm/kdebug_64.h
new file mode 100644
index 000000000000..f905b773235a
--- /dev/null
+++ b/arch/sparc/include/asm/kdebug_64.h
@@ -0,0 +1,19 @@
+#ifndef _SPARC64_KDEBUG_H
+#define _SPARC64_KDEBUG_H
+
+struct pt_regs;
+
+extern void bad_trap(struct pt_regs *, long);
+
+/* Grossly misnamed. */
+enum die_val {
+	DIE_OOPS = 1,
+	DIE_DEBUG,	/* ta 0x70 */
+	DIE_DEBUG_2,	/* ta 0x71 */
+	DIE_DIE,
+	DIE_TRAP,
+	DIE_TRAP_TL1,
+	DIE_CALL,
+};
+
+#endif
diff --git a/arch/sparc/include/asm/kgdb.h b/arch/sparc/include/asm/kgdb.h
new file mode 100644
index 000000000000..b6ef301d05bf
--- /dev/null
+++ b/arch/sparc/include/asm/kgdb.h
@@ -0,0 +1,38 @@
+#ifndef _SPARC_KGDB_H
+#define _SPARC_KGDB_H
+
+#ifdef CONFIG_SPARC32
+#define BUFMAX			2048
+#else
+#define BUFMAX			4096
+#endif
+
+enum regnames {
+	GDB_G0, GDB_G1, GDB_G2, GDB_G3, GDB_G4, GDB_G5, GDB_G6, GDB_G7,
+	GDB_O0, GDB_O1, GDB_O2, GDB_O3, GDB_O4, GDB_O5, GDB_SP, GDB_O7,
+	GDB_L0, GDB_L1, GDB_L2, GDB_L3, GDB_L4, GDB_L5, GDB_L6, GDB_L7,
+	GDB_I0, GDB_I1, GDB_I2, GDB_I3, GDB_I4, GDB_I5, GDB_FP, GDB_I7,
+	GDB_F0,
+	GDB_F31 = GDB_F0 + 31,
+#ifdef CONFIG_SPARC32
+	GDB_Y, GDB_PSR, GDB_WIM, GDB_TBR, GDB_PC, GDB_NPC,
+	GDB_FSR, GDB_CSR,
+#else
+	GDB_F32 = GDB_F0 + 32,
+	GDB_F62 = GDB_F32 + 15,
+	GDB_PC, GDB_NPC, GDB_STATE, GDB_FSR, GDB_FPRS, GDB_Y,
+#endif
+};
+
+#ifdef CONFIG_SPARC32
+#define NUMREGBYTES		((GDB_CSR + 1) * 4)
+#else
+#define NUMREGBYTES		((GDB_Y + 1) * 8)
+#endif
+
+extern void arch_kgdb_breakpoint(void);
+
+#define BREAK_INSTR_SIZE	4
+#define CACHE_FLUSH_IS_SAFE	1
+
+#endif /* _SPARC_KGDB_H */
diff --git a/arch/sparc/include/asm/kmap_types.h b/arch/sparc/include/asm/kmap_types.h
new file mode 100644
index 000000000000..602f5e034f7a
--- /dev/null
+++ b/arch/sparc/include/asm/kmap_types.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_KMAP_TYPES_H
+#define _ASM_KMAP_TYPES_H
+
+/* Dummy header just to define km_type.  None of this
+ * is actually used on sparc.  -DaveM
+ */
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_SOFTIRQ0,
+	KM_SOFTIRQ1,
+	KM_TYPE_NR
+};
+
+#endif
diff --git a/arch/sparc/include/asm/kprobes.h b/arch/sparc/include/asm/kprobes.h
new file mode 100644
index 000000000000..5879d71afdaa
--- /dev/null
+++ b/arch/sparc/include/asm/kprobes.h
@@ -0,0 +1,49 @@
+#ifndef _SPARC64_KPROBES_H
+#define _SPARC64_KPROBES_H
+
+#include <linux/types.h>
+#include <linux/percpu.h>
+
+typedef u32 kprobe_opcode_t;
+
+#define BREAKPOINT_INSTRUCTION   0x91d02070 /* ta 0x70 */
+#define BREAKPOINT_INSTRUCTION_2 0x91d02071 /* ta 0x71 */
+#define MAX_INSN_SIZE 2
+
+#define kretprobe_blacklist_size 0
+
+#define arch_remove_kprobe(p)	do {} while (0)
+
+#define flush_insn_slot(p)		\
+do { 	flushi(&(p)->ainsn.insn[0]);	\
+	flushi(&(p)->ainsn.insn[1]);	\
+} while (0)
+
+void kretprobe_trampoline(void);
+
+/* Architecture specific copy of original instruction*/
+struct arch_specific_insn {
+	/* copy of the original instruction */
+	kprobe_opcode_t insn[MAX_INSN_SIZE];
+};
+
+struct prev_kprobe {
+	struct kprobe *kp;
+	unsigned long status;
+	unsigned long orig_tnpc;
+	unsigned long orig_tstate_pil;
+};
+
+/* per-cpu kprobe control block */
+struct kprobe_ctlblk {
+	unsigned long kprobe_status;
+	unsigned long kprobe_orig_tnpc;
+	unsigned long kprobe_orig_tstate_pil;
+	struct pt_regs jprobe_saved_regs;
+	struct prev_kprobe prev_kprobe;
+};
+
+extern int kprobe_exceptions_notify(struct notifier_block *self,
+				    unsigned long val, void *data);
+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
+#endif /* _SPARC64_KPROBES_H */
diff --git a/arch/sparc/include/asm/ldc.h b/arch/sparc/include/asm/ldc.h
new file mode 100644
index 000000000000..bdb524a7b814
--- /dev/null
+++ b/arch/sparc/include/asm/ldc.h
@@ -0,0 +1,138 @@
+#ifndef _SPARC64_LDC_H
+#define _SPARC64_LDC_H
+
+#include <asm/hypervisor.h>
+
+extern int ldom_domaining_enabled;
+extern void ldom_set_var(const char *var, const char *value);
+extern void ldom_reboot(const char *boot_command);
+extern void ldom_power_off(void);
+
+/* The event handler will be evoked when link state changes
+ * or data becomes available on the receive side.
+ *
+ * For non-RAW links, if the LDC_EVENT_RESET event arrives the
+ * driver should reset all of it's internal state and reinvoke
+ * ldc_connect() to try and bring the link up again.
+ *
+ * For RAW links, ldc_connect() is not used.  Instead the driver
+ * just waits for the LDC_EVENT_UP event.
+ */
+struct ldc_channel_config {
+	void (*event)(void *arg, int event);
+
+	u32			mtu;
+	unsigned int		rx_irq;
+	unsigned int		tx_irq;
+	u8			mode;
+#define LDC_MODE_RAW		0x00
+#define LDC_MODE_UNRELIABLE	0x01
+#define LDC_MODE_RESERVED	0x02
+#define LDC_MODE_STREAM		0x03
+
+	u8			debug;
+#define LDC_DEBUG_HS		0x01
+#define LDC_DEBUG_STATE		0x02
+#define LDC_DEBUG_RX		0x04
+#define LDC_DEBUG_TX		0x08
+#define LDC_DEBUG_DATA		0x10
+};
+
+#define LDC_EVENT_RESET		0x01
+#define LDC_EVENT_UP		0x02
+#define LDC_EVENT_DATA_READY	0x04
+
+#define LDC_STATE_INVALID	0x00
+#define LDC_STATE_INIT		0x01
+#define LDC_STATE_BOUND		0x02
+#define LDC_STATE_READY		0x03
+#define LDC_STATE_CONNECTED	0x04
+
+struct ldc_channel;
+
+/* Allocate state for a channel.  */
+extern struct ldc_channel *ldc_alloc(unsigned long id,
+				     const struct ldc_channel_config *cfgp,
+				     void *event_arg);
+
+/* Shut down and free state for a channel.  */
+extern void ldc_free(struct ldc_channel *lp);
+
+/* Register TX and RX queues of the link with the hypervisor.  */
+extern int ldc_bind(struct ldc_channel *lp, const char *name);
+
+/* For non-RAW protocols we need to complete a handshake before
+ * communication can proceed.  ldc_connect() does that, if the
+ * handshake completes successfully, an LDC_EVENT_UP event will
+ * be sent up to the driver.
+ */
+extern int ldc_connect(struct ldc_channel *lp);
+extern int ldc_disconnect(struct ldc_channel *lp);
+
+extern int ldc_state(struct ldc_channel *lp);
+
+/* Read and write operations.  Only valid when the link is up.  */
+extern int ldc_write(struct ldc_channel *lp, const void *buf,
+		     unsigned int size);
+extern int ldc_read(struct ldc_channel *lp, void *buf, unsigned int size);
+
+#define LDC_MAP_SHADOW	0x01
+#define LDC_MAP_DIRECT	0x02
+#define LDC_MAP_IO	0x04
+#define LDC_MAP_R	0x08
+#define LDC_MAP_W	0x10
+#define LDC_MAP_X	0x20
+#define LDC_MAP_RW	(LDC_MAP_R | LDC_MAP_W)
+#define LDC_MAP_RWX	(LDC_MAP_R | LDC_MAP_W | LDC_MAP_X)
+#define LDC_MAP_ALL	0x03f
+
+struct ldc_trans_cookie {
+	u64			cookie_addr;
+	u64			cookie_size;
+};
+
+struct scatterlist;
+extern int ldc_map_sg(struct ldc_channel *lp,
+		      struct scatterlist *sg, int num_sg,
+		      struct ldc_trans_cookie *cookies, int ncookies,
+		      unsigned int map_perm);
+
+extern int ldc_map_single(struct ldc_channel *lp,
+			  void *buf, unsigned int len,
+			  struct ldc_trans_cookie *cookies, int ncookies,
+			  unsigned int map_perm);
+
+extern void ldc_unmap(struct ldc_channel *lp, struct ldc_trans_cookie *cookies,
+		      int ncookies);
+
+extern int ldc_copy(struct ldc_channel *lp, int copy_dir,
+		    void *buf, unsigned int len, unsigned long offset,
+		    struct ldc_trans_cookie *cookies, int ncookies);
+
+static inline int ldc_get_dring_entry(struct ldc_channel *lp,
+				      void *buf, unsigned int len,
+				      unsigned long offset,
+				      struct ldc_trans_cookie *cookies,
+				      int ncookies)
+{
+	return ldc_copy(lp, LDC_COPY_IN, buf, len, offset, cookies, ncookies);
+}
+
+static inline int ldc_put_dring_entry(struct ldc_channel *lp,
+				      void *buf, unsigned int len,
+				      unsigned long offset,
+				      struct ldc_trans_cookie *cookies,
+				      int ncookies)
+{
+	return ldc_copy(lp, LDC_COPY_OUT, buf, len, offset, cookies, ncookies);
+}
+
+extern void *ldc_alloc_exp_dring(struct ldc_channel *lp, unsigned int len,
+				 struct ldc_trans_cookie *cookies,
+				 int *ncookies, unsigned int map_perm);
+
+extern void ldc_free_exp_dring(struct ldc_channel *lp, void *buf,
+			       unsigned int len,
+			       struct ldc_trans_cookie *cookies, int ncookies);
+
+#endif /* _SPARC64_LDC_H */
diff --git a/arch/sparc/include/asm/linkage.h b/arch/sparc/include/asm/linkage.h
new file mode 100644
index 000000000000..291c2d01c44f
--- /dev/null
+++ b/arch/sparc/include/asm/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/arch/sparc/include/asm/lmb.h b/arch/sparc/include/asm/lmb.h
new file mode 100644
index 000000000000..6a352cbcf520
--- /dev/null
+++ b/arch/sparc/include/asm/lmb.h
@@ -0,0 +1,10 @@
+#ifndef _SPARC64_LMB_H
+#define _SPARC64_LMB_H
+
+#include <asm/oplib.h>
+
+#define LMB_DBG(fmt...) prom_printf(fmt)
+
+#define LMB_REAL_LIMIT	0
+
+#endif /* !(_SPARC64_LMB_H) */
diff --git a/arch/sparc/include/asm/local.h b/arch/sparc/include/asm/local.h
new file mode 100644
index 000000000000..bc80815a435c
--- /dev/null
+++ b/arch/sparc/include/asm/local.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_LOCAL_H
+#define _SPARC_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif
diff --git a/arch/sparc/include/asm/lsu.h b/arch/sparc/include/asm/lsu.h
new file mode 100644
index 000000000000..7190f8de90a0
--- /dev/null
+++ b/arch/sparc/include/asm/lsu.h
@@ -0,0 +1,19 @@
+#ifndef _SPARC64_LSU_H
+#define _SPARC64_LSU_H
+
+#include <linux/const.h>
+
+/* LSU Control Register */
+#define LSU_CONTROL_PM _AC(0x000001fe00000000,UL) /* Phys-watchpoint byte mask*/
+#define LSU_CONTROL_VM _AC(0x00000001fe000000,UL) /* Virt-watchpoint byte mask*/
+#define LSU_CONTROL_PR _AC(0x0000000001000000,UL) /* Phys-rd watchpoint enable*/
+#define LSU_CONTROL_PW _AC(0x0000000000800000,UL) /* Phys-wr watchpoint enable*/
+#define LSU_CONTROL_VR _AC(0x0000000000400000,UL) /* Virt-rd watchpoint enable*/
+#define LSU_CONTROL_VW _AC(0x0000000000200000,UL) /* Virt-wr watchpoint enable*/
+#define LSU_CONTROL_FM _AC(0x00000000000ffff0,UL) /* Parity mask enables.     */
+#define LSU_CONTROL_DM _AC(0x0000000000000008,UL) /* Data MMU enable.         */
+#define LSU_CONTROL_IM _AC(0x0000000000000004,UL) /* Instruction MMU enable.  */
+#define LSU_CONTROL_DC _AC(0x0000000000000002,UL) /* Data cache enable.       */
+#define LSU_CONTROL_IC _AC(0x0000000000000001,UL) /* Instruction cache enable.*/
+
+#endif /* !(_SPARC64_LSU_H) */
diff --git a/arch/sparc/include/asm/machines.h b/arch/sparc/include/asm/machines.h
new file mode 100644
index 000000000000..c28c2f248794
--- /dev/null
+++ b/arch/sparc/include/asm/machines.h
@@ -0,0 +1,67 @@
+/*
+ * machines.h:  Defines for taking apart the machine type value in the
+ *              idprom and determining the kind of machine we are on.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_MACHINES_H
+#define _SPARC_MACHINES_H
+
+struct Sun_Machine_Models {
+	char *name;
+	unsigned char id_machtype;
+};
+
+/* Current number of machines we know about that has an IDPROM
+ * machtype entry including one entry for the 0x80 OBP machines.
+ */
+#define NUM_SUN_MACHINES   15
+
+/* The machine type in the idprom area looks like this:
+ *
+ * ---------------
+ * | ARCH | MACH |
+ * ---------------
+ *  7    4 3    0
+ *
+ * The ARCH field determines the architecture line (sun4, sun4c, etc).
+ * The MACH field determines the machine make within that architecture.
+ */
+
+#define SM_ARCH_MASK  0xf0
+#define SM_SUN4       0x20
+#define SM_SUN4C      0x50
+#define SM_SUN4M      0x70
+#define SM_SUN4M_OBP  0x80
+
+#define SM_TYP_MASK   0x0f
+/* Sun4 machines */
+#define SM_4_260      0x01    /* Sun 4/200 series */
+#define SM_4_110      0x02    /* Sun 4/100 series */
+#define SM_4_330      0x03    /* Sun 4/300 series */
+#define SM_4_470      0x04    /* Sun 4/400 series */
+
+/* Sun4c machines                Full Name              - PROM NAME */
+#define SM_4C_SS1     0x01    /* Sun4c SparcStation 1   - Sun 4/60  */
+#define SM_4C_IPC     0x02    /* Sun4c SparcStation IPC - Sun 4/40  */
+#define SM_4C_SS1PLUS 0x03    /* Sun4c SparcStation 1+  - Sun 4/65  */
+#define SM_4C_SLC     0x04    /* Sun4c SparcStation SLC - Sun 4/20  */
+#define SM_4C_SS2     0x05    /* Sun4c SparcStation 2   - Sun 4/75  */
+#define SM_4C_ELC     0x06    /* Sun4c SparcStation ELC - Sun 4/25  */
+#define SM_4C_IPX     0x07    /* Sun4c SparcStation IPX - Sun 4/50  */
+
+/* Sun4m machines, these predate the OpenBoot.  These values only mean
+ * something if the value in the ARCH field is SM_SUN4M, if it is
+ * SM_SUN4M_OBP then you have the following situation:
+ * 1) You either have a sun4d, a sun4e, or a recently made sun4m.
+ * 2) You have to consult OpenBoot to determine which machine this is.
+ */
+#define SM_4M_SS60    0x01    /* Sun4m SparcSystem 600                  */
+#define SM_4M_SS50    0x02    /* Sun4m SparcStation 10                  */
+#define SM_4M_SS40    0x03    /* Sun4m SparcStation 5                   */
+
+/* Sun4d machines -- N/A */
+/* Sun4e machines -- N/A */
+/* Sun4u machines -- N/A */
+
+#endif /* !(_SPARC_MACHINES_H) */
diff --git a/arch/sparc/include/asm/mbus.h b/arch/sparc/include/asm/mbus.h
new file mode 100644
index 000000000000..69f07a022ee6
--- /dev/null
+++ b/arch/sparc/include/asm/mbus.h
@@ -0,0 +1,100 @@
+/*
+ * mbus.h:  Various defines for MBUS modules.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MBUS_H
+#define _SPARC_MBUS_H
+
+#include <asm/ross.h>    /* HyperSparc stuff */
+#include <asm/cypress.h> /* Cypress Chips */
+#include <asm/viking.h>  /* Ugh, bug city... */
+
+enum mbus_module {
+	HyperSparc        = 0,
+	Cypress           = 1,
+	Cypress_vE        = 2,
+	Cypress_vD        = 3,
+	Swift_ok          = 4,
+	Swift_bad_c       = 5,
+	Swift_lots_o_bugs = 6,
+	Tsunami           = 7,
+	Viking_12         = 8,
+	Viking_2x         = 9,
+	Viking_30         = 10,
+	Viking_35         = 11,
+	Viking_new        = 12,
+	TurboSparc	  = 13,
+	SRMMU_INVAL_MOD   = 14,
+};
+
+extern enum mbus_module srmmu_modtype;
+extern unsigned int viking_rev, swift_rev, cypress_rev;
+
+/* HW Mbus module bugs we have to deal with */
+#define HWBUG_COPYBACK_BROKEN        0x00000001
+#define HWBUG_ASIFLUSH_BROKEN        0x00000002
+#define HWBUG_VACFLUSH_BITROT        0x00000004
+#define HWBUG_KERN_ACCBROKEN         0x00000008
+#define HWBUG_KERN_CBITBROKEN        0x00000010
+#define HWBUG_MODIFIED_BITROT        0x00000020
+#define HWBUG_PC_BADFAULT_ADDR       0x00000040
+#define HWBUG_SUPERSCALAR_BAD        0x00000080
+#define HWBUG_PACINIT_BITROT         0x00000100
+
+/* First the module type values. To find out which you have, just load
+ * the mmu control register from ASI_M_MMUREG alternate address space and
+ * shift the value right 28 bits.
+ */
+/* IMPL field means the company which produced the chip. */
+#define MBUS_VIKING        0x4   /* bleech, Texas Instruments Module */
+#define MBUS_LSI           0x3   /* LSI Logics */
+#define MBUS_ROSS          0x1   /* Ross is nice */
+#define MBUS_FMI           0x0   /* Fujitsu Microelectronics/Swift */
+
+/* Ross Module versions */
+#define ROSS_604_REV_CDE        0x0   /* revisions c, d, and e */
+#define ROSS_604_REV_F          0x1   /* revision f */
+#define ROSS_605                0xf   /* revision a, a.1, and a.2 */
+#define ROSS_605_REV_B          0xe   /* revision b */
+
+/* TI Viking Module versions */
+#define VIKING_REV_12           0x1   /* Version 1.2 or SPARCclassic's CPU */
+#define VIKING_REV_2            0x2   /* Version 2.1, 2.2, 2.3, and 2.4 */
+#define VIKING_REV_30           0x3   /* Version 3.0 */
+#define VIKING_REV_35           0x4   /* Version 3.5 */
+
+/* LSI Logics. */
+#define LSI_L64815		0x0
+
+/* Fujitsu */
+#define FMI_AURORA		0x4   /* MB8690x, a Swift module... */
+#define FMI_TURBO		0x5   /* MB86907, a TurboSparc module... */
+
+/* For multiprocessor support we need to be able to obtain the CPU id and
+ * the MBUS Module id.
+ */
+
+/* The CPU ID is encoded in the trap base register, 20 bits to the left of
+ * bit zero, with 2 bits being significant.
+ */
+#define TBR_ID_SHIFT            20
+
+static inline int get_cpuid(void)
+{
+	register int retval;
+	__asm__ __volatile__("rd %%tbr, %0\n\t"
+			     "srl %0, %1, %0\n\t" :
+			     "=r" (retval) :
+			     "i" (TBR_ID_SHIFT));
+	return (retval & 3);
+}
+
+static inline int get_modid(void)
+{
+	return (get_cpuid() | 0x8);
+}
+
+	
+#endif /* !(_SPARC_MBUS_H) */
diff --git a/arch/sparc/include/asm/mc146818rtc.h b/arch/sparc/include/asm/mc146818rtc.h
new file mode 100644
index 000000000000..67ed9e3a0235
--- /dev/null
+++ b/arch/sparc/include/asm/mc146818rtc.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MC146818RTC_H
+#define ___ASM_SPARC_MC146818RTC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mc146818rtc_64.h>
+#else
+#include <asm/mc146818rtc_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/mc146818rtc_32.h b/arch/sparc/include/asm/mc146818rtc_32.h
new file mode 100644
index 000000000000..fa7eac926582
--- /dev/null
+++ b/arch/sparc/include/asm/mc146818rtc_32.h
@@ -0,0 +1,29 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_SPARC_MC146818RTC_H
+#define __ASM_SPARC_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#define RTC_PORT(x)	(0x70 + (x))
+#define RTC_ALWAYS_BCD	1	/* RTC operates in binary mode */
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#define RTC_IRQ 8
+
+#endif /* __ASM_SPARC_MC146818RTC_H */
diff --git a/arch/sparc/include/asm/mc146818rtc_64.h b/arch/sparc/include/asm/mc146818rtc_64.h
new file mode 100644
index 000000000000..e9c0fcc25c6f
--- /dev/null
+++ b/arch/sparc/include/asm/mc146818rtc_64.h
@@ -0,0 +1,34 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef __ASM_SPARC64_MC146818RTC_H
+#define __ASM_SPARC64_MC146818RTC_H
+
+#include <asm/io.h>
+
+#ifndef RTC_PORT
+#ifdef CONFIG_PCI
+extern unsigned long ds1287_regs;
+#else
+#define ds1287_regs (0UL)
+#endif
+#define RTC_PORT(x)	(ds1287_regs + (x))
+#define RTC_ALWAYS_BCD	0
+#endif
+
+/*
+ * The yet supported machines all access the RTC index register via
+ * an ISA port access but the way to access the date register differs ...
+ */
+#define CMOS_READ(addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+outb_p((addr),RTC_PORT(0)); \
+outb_p((val),RTC_PORT(1)); \
+})
+
+#define RTC_IRQ 8
+
+#endif /* __ASM_SPARC64_MC146818RTC_H */
diff --git a/arch/sparc/include/asm/mdesc.h b/arch/sparc/include/asm/mdesc.h
new file mode 100644
index 000000000000..1acc7272e537
--- /dev/null
+++ b/arch/sparc/include/asm/mdesc.h
@@ -0,0 +1,78 @@
+#ifndef _SPARC64_MDESC_H
+#define _SPARC64_MDESC_H
+
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include <asm/prom.h>
+
+struct mdesc_handle;
+
+/* Machine description operations are to be surrounded by grab and
+ * release calls.  The mdesc_handle returned from the grab is
+ * the first argument to all of the operational calls that work
+ * on mdescs.
+ */
+extern struct mdesc_handle *mdesc_grab(void);
+extern void mdesc_release(struct mdesc_handle *);
+
+#define MDESC_NODE_NULL		(~(u64)0)
+
+extern u64 mdesc_node_by_name(struct mdesc_handle *handle,
+			      u64 from_node, const char *name);
+#define mdesc_for_each_node_by_name(__hdl, __node, __name) \
+	for (__node = mdesc_node_by_name(__hdl, MDESC_NODE_NULL, __name); \
+	     (__node) != MDESC_NODE_NULL; \
+	     __node = mdesc_node_by_name(__hdl, __node, __name))
+
+/* Access to property values returned from mdesc_get_property() are
+ * only valid inside of a mdesc_grab()/mdesc_release() sequence.
+ * Once mdesc_release() is called, the memory backed up by these
+ * pointers may reference freed up memory.
+ *
+ * Therefore callers must make copies of any property values
+ * they need.
+ *
+ * These same rules apply to mdesc_node_name().
+ */
+extern const void *mdesc_get_property(struct mdesc_handle *handle,
+				      u64 node, const char *name, int *lenp);
+extern const char *mdesc_node_name(struct mdesc_handle *hp, u64 node);
+
+/* MD arc iteration, the standard sequence is:
+ *
+ *	unsigned long arc;
+ *	mdesc_for_each_arc(arc, handle, node, MDESC_ARC_TYPE_{FWD,BACK}) {
+ *		unsigned long target = mdesc_arc_target(handle, arc);
+ *		...
+ *	}
+ */
+
+#define MDESC_ARC_TYPE_FWD	"fwd"
+#define MDESC_ARC_TYPE_BACK	"back"
+
+extern u64 mdesc_next_arc(struct mdesc_handle *handle, u64 from,
+			  const char *arc_type);
+#define mdesc_for_each_arc(__arc, __hdl, __node, __type) \
+	for (__arc = mdesc_next_arc(__hdl, __node, __type); \
+	     (__arc) != MDESC_NODE_NULL; \
+	     __arc = mdesc_next_arc(__hdl, __arc, __type))
+
+extern u64 mdesc_arc_target(struct mdesc_handle *hp, u64 arc);
+
+extern void mdesc_update(void);
+
+struct mdesc_notifier_client {
+	void (*add)(struct mdesc_handle *handle, u64 node);
+	void (*remove)(struct mdesc_handle *handle, u64 node);
+
+	const char			*node_name;
+	struct mdesc_notifier_client	*next;
+};
+
+extern void mdesc_register_notifier(struct mdesc_notifier_client *client);
+
+extern void mdesc_fill_in_cpu_data(cpumask_t mask);
+
+extern void sun4v_mdesc_init(void);
+
+#endif
diff --git a/arch/sparc/include/asm/memreg.h b/arch/sparc/include/asm/memreg.h
new file mode 100644
index 000000000000..845ad2b39183
--- /dev/null
+++ b/arch/sparc/include/asm/memreg.h
@@ -0,0 +1,51 @@
+#ifndef _SPARC_MEMREG_H
+#define _SPARC_MEMREG_H
+/* memreg.h:  Definitions of the values found in the synchronous
+ *            and asynchronous memory error registers when a fault
+ *            occurs on the sun4c.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* First the synchronous error codes, these are usually just
+ * normal page faults.
+ */
+
+#define SUN4C_SYNC_WDRESET   0x0001  /* watchdog reset */
+#define SUN4C_SYNC_SIZE      0x0002  /* bad access size? whuz this? */
+#define SUN4C_SYNC_PARITY    0x0008  /* bad ram chips caused a parity error */
+#define SUN4C_SYNC_SBUS      0x0010  /* the SBUS had some problems... */
+#define SUN4C_SYNC_NOMEM     0x0020  /* translation to non-existent ram */
+#define SUN4C_SYNC_PROT      0x0040  /* access violated pte protections */
+#define SUN4C_SYNC_NPRESENT  0x0080  /* pte said that page was not present */
+#define SUN4C_SYNC_BADWRITE  0x8000  /* while writing something went bogus */
+
+#define SUN4C_SYNC_BOLIXED  \
+        (SUN4C_SYNC_WDRESET | SUN4C_SYNC_SIZE | SUN4C_SYNC_SBUS | \
+         SUN4C_SYNC_NOMEM | SUN4C_SYNC_PARITY)
+
+/* Now the asynchronous error codes, these are almost always produced
+ * by the cache writing things back to memory and getting a bad translation.
+ * Bad DVMA transactions can cause these faults too.
+ */
+
+#define SUN4C_ASYNC_BADDVMA 0x0010  /* error during DVMA access */
+#define SUN4C_ASYNC_NOMEM   0x0020  /* write back pointed to bad phys addr */
+#define SUN4C_ASYNC_BADWB   0x0080  /* write back points to non-present page */
+
+/* Memory parity error register with associated bit constants. */
+#ifndef __ASSEMBLY__
+extern __volatile__ unsigned long __iomem *sun4c_memerr_reg;
+#endif
+
+#define	SUN4C_MPE_ERROR	0x80	/* Parity error detected. (ro) */
+#define	SUN4C_MPE_MULTI	0x40	/* Multiple parity errors detected. (ro) */
+#define	SUN4C_MPE_TEST	0x20	/* Write inverse parity. (rw) */
+#define	SUN4C_MPE_CHECK	0x10	/* Enable parity checking. (rw) */
+#define	SUN4C_MPE_ERR00	0x08	/* Parity error in bits 0-7. (ro) */
+#define	SUN4C_MPE_ERR08	0x04	/* Parity error in bits 8-15. (ro) */
+#define	SUN4C_MPE_ERR16	0x02	/* Parity error in bits 16-23. (ro) */
+#define	SUN4C_MPE_ERR24	0x01	/* Parity error in bits 24-31. (ro) */
+#define	SUN4C_MPE_ERRS	0x0F	/* Bit mask for the error bits. (ro) */
+
+#endif /* !(_SPARC_MEMREG_H) */
diff --git a/arch/sparc/include/asm/mman.h b/arch/sparc/include/asm/mman.h
new file mode 100644
index 000000000000..fdfbbf0a4736
--- /dev/null
+++ b/arch/sparc/include/asm/mman.h
@@ -0,0 +1,31 @@
+#ifndef __SPARC_MMAN_H__
+#define __SPARC_MMAN_H__
+
+#include <asm-generic/mman.h>
+
+/* SunOS'ified... */
+
+#define MAP_RENAME      MAP_ANONYMOUS   /* In SunOS terminology */
+#define MAP_NORESERVE   0x40            /* don't reserve swap pages */
+#define MAP_INHERIT     0x80            /* SunOS doesn't do this, but... */
+#define MAP_LOCKED      0x100           /* lock the mapping */
+#define _MAP_NEW        0x80000000      /* Binary compatibility is fun... */
+
+#define MAP_GROWSDOWN	0x0200		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+
+#define MCL_CURRENT     0x2000          /* lock all currently mapped pages */
+#define MCL_FUTURE      0x4000          /* lock all additions to address space */
+
+#define MAP_POPULATE	0x8000		/* populate (prefault) pagetables */
+#define MAP_NONBLOCK	0x10000		/* do not block on IO */
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#define arch_mmap_check(addr,len,flags)	sparc_mmap_check(addr,len)
+int sparc_mmap_check(unsigned long addr, unsigned long len);
+#endif
+#endif
+
+#endif /* __SPARC_MMAN_H__ */
diff --git a/arch/sparc/include/asm/mmu.h b/arch/sparc/include/asm/mmu.h
new file mode 100644
index 000000000000..88fa313887db
--- /dev/null
+++ b/arch/sparc/include/asm/mmu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MMU_H
+#define ___ASM_SPARC_MMU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mmu_64.h>
+#else
+#include <asm/mmu_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/mmu_32.h b/arch/sparc/include/asm/mmu_32.h
new file mode 100644
index 000000000000..ccd36d26615a
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_32.h
@@ -0,0 +1,7 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+#endif
diff --git a/arch/sparc/include/asm/mmu_64.h b/arch/sparc/include/asm/mmu_64.h
new file mode 100644
index 000000000000..9067dc500535
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_64.h
@@ -0,0 +1,123 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+#include <linux/const.h>
+#include <asm/page.h>
+#include <asm/hypervisor.h>
+
+#define CTX_NR_BITS		13
+
+#define TAG_CONTEXT_BITS	((_AC(1,UL) << CTX_NR_BITS) - _AC(1,UL))
+
+/* UltraSPARC-III+ and later have a feature whereby you can
+ * select what page size the various Data-TLB instances in the
+ * chip.  In order to gracefully support this, we put the version
+ * field in a spot outside of the areas of the context register
+ * where this parameter is specified.
+ */
+#define CTX_VERSION_SHIFT	22
+#define CTX_VERSION_MASK	((~0UL) << CTX_VERSION_SHIFT)
+
+#define CTX_PGSZ_8KB		_AC(0x0,UL)
+#define CTX_PGSZ_64KB		_AC(0x1,UL)
+#define CTX_PGSZ_512KB		_AC(0x2,UL)
+#define CTX_PGSZ_4MB		_AC(0x3,UL)
+#define CTX_PGSZ_BITS		_AC(0x7,UL)
+#define CTX_PGSZ0_NUC_SHIFT	61
+#define CTX_PGSZ1_NUC_SHIFT	58
+#define CTX_PGSZ0_SHIFT		16
+#define CTX_PGSZ1_SHIFT		19
+#define CTX_PGSZ_MASK		((CTX_PGSZ_BITS << CTX_PGSZ0_SHIFT) | \
+				 (CTX_PGSZ_BITS << CTX_PGSZ1_SHIFT))
+
+#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB)
+#define CTX_PGSZ_BASE	CTX_PGSZ_8KB
+#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB)
+#define CTX_PGSZ_BASE	CTX_PGSZ_64KB
+#else
+#error No page size specified in kernel configuration
+#endif
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define CTX_PGSZ_HUGE		CTX_PGSZ_4MB
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
+#define CTX_PGSZ_HUGE		CTX_PGSZ_512KB
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define CTX_PGSZ_HUGE		CTX_PGSZ_64KB
+#endif
+
+#define CTX_PGSZ_KERN	CTX_PGSZ_4MB
+
+/* Thus, when running on UltraSPARC-III+ and later, we use the following
+ * PRIMARY_CONTEXT register values for the kernel context.
+ */
+#define CTX_CHEETAH_PLUS_NUC \
+	((CTX_PGSZ_KERN << CTX_PGSZ0_NUC_SHIFT) | \
+	 (CTX_PGSZ_BASE << CTX_PGSZ1_NUC_SHIFT))
+
+#define CTX_CHEETAH_PLUS_CTX0 \
+	((CTX_PGSZ_KERN << CTX_PGSZ0_SHIFT) | \
+	 (CTX_PGSZ_BASE << CTX_PGSZ1_SHIFT))
+
+/* If you want "the TLB context number" use CTX_NR_MASK.  If you
+ * want "the bits I program into the context registers" use
+ * CTX_HW_MASK.
+ */
+#define CTX_NR_MASK		TAG_CONTEXT_BITS
+#define CTX_HW_MASK		(CTX_NR_MASK | CTX_PGSZ_MASK)
+
+#define CTX_FIRST_VERSION	((_AC(1,UL) << CTX_VERSION_SHIFT) + _AC(1,UL))
+#define CTX_VALID(__ctx)	\
+	 (!(((__ctx.sparc64_ctx_val) ^ tlb_context_cache) & CTX_VERSION_MASK))
+#define CTX_HWBITS(__ctx)	((__ctx.sparc64_ctx_val) & CTX_HW_MASK)
+#define CTX_NRBITS(__ctx)	((__ctx.sparc64_ctx_val) & CTX_NR_MASK)
+
+#ifndef __ASSEMBLY__
+
+#define TSB_ENTRY_ALIGNMENT	16
+
+struct tsb {
+	unsigned long tag;
+	unsigned long pte;
+} __attribute__((aligned(TSB_ENTRY_ALIGNMENT)));
+
+extern void __tsb_insert(unsigned long ent, unsigned long tag, unsigned long pte);
+extern void tsb_flush(unsigned long ent, unsigned long tag);
+extern void tsb_init(struct tsb *tsb, unsigned long size);
+
+struct tsb_config {
+	struct tsb		*tsb;
+	unsigned long		tsb_rss_limit;
+	unsigned long		tsb_nentries;
+	unsigned long		tsb_reg_val;
+	unsigned long		tsb_map_vaddr;
+	unsigned long		tsb_map_pte;
+};
+
+#define MM_TSB_BASE	0
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define MM_TSB_HUGE	1
+#define MM_NUM_TSBS	2
+#else
+#define MM_NUM_TSBS	1
+#endif
+
+typedef struct {
+	spinlock_t		lock;
+	unsigned long		sparc64_ctx_val;
+	unsigned long		huge_pte_count;
+	struct tsb_config	tsb_block[MM_NUM_TSBS];
+	struct hv_tsb_descr	tsb_descr[MM_NUM_TSBS];
+} mm_context_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#define TSB_CONFIG_TSB		0x00
+#define TSB_CONFIG_RSS_LIMIT	0x08
+#define TSB_CONFIG_NENTRIES	0x10
+#define TSB_CONFIG_REG_VAL	0x18
+#define TSB_CONFIG_MAP_VADDR	0x20
+#define TSB_CONFIG_MAP_PTE	0x28
+
+#endif /* __MMU_H */
diff --git a/arch/sparc/include/asm/mmu_context.h b/arch/sparc/include/asm/mmu_context.h
new file mode 100644
index 000000000000..5531346c64f9
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_context.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MMU_CONTEXT_H
+#define ___ASM_SPARC_MMU_CONTEXT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mmu_context_64.h>
+#else
+#include <asm/mmu_context_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/mmu_context_32.h b/arch/sparc/include/asm/mmu_context_32.h
new file mode 100644
index 000000000000..671a997b9e69
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_context_32.h
@@ -0,0 +1,42 @@
+#ifndef __SPARC_MMU_CONTEXT_H
+#define __SPARC_MMU_CONTEXT_H
+
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * Initialize a new mmu context.  This is invoked when a new
+ * address space instance (unique or shared) is instantiated.
+ */
+#define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0)
+
+/*
+ * Destroy a dead context.  This occurs when mmput drops the
+ * mm_users count to zero, the mmaps have been released, and
+ * all the page tables have been flushed.  Our job is to destroy
+ * any remaining processor-specific state.
+ */
+BTFIXUPDEF_CALL(void, destroy_context, struct mm_struct *)
+
+#define destroy_context(mm) BTFIXUP_CALL(destroy_context)(mm)
+
+/* Switch the current MM context. */
+BTFIXUPDEF_CALL(void, switch_mm, struct mm_struct *, struct mm_struct *, struct task_struct *)
+
+#define switch_mm(old_mm, mm, tsk) BTFIXUP_CALL(switch_mm)(old_mm, mm, tsk)
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/* Activate a new MM instance for the current task. */
+#define activate_mm(active_mm, mm) switch_mm((active_mm), (mm), NULL)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_MMU_CONTEXT_H) */
diff --git a/arch/sparc/include/asm/mmu_context_64.h b/arch/sparc/include/asm/mmu_context_64.h
new file mode 100644
index 000000000000..5693ab482606
--- /dev/null
+++ b/arch/sparc/include/asm/mmu_context_64.h
@@ -0,0 +1,155 @@
+#ifndef __SPARC64_MMU_CONTEXT_H
+#define __SPARC64_MMU_CONTEXT_H
+
+/* Derived heavily from Linus's Alpha/AXP ASN code... */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/spinlock.h>
+#include <asm/system.h>
+#include <asm/spitfire.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+extern spinlock_t ctx_alloc_lock;
+extern unsigned long tlb_context_cache;
+extern unsigned long mmu_context_bmap[];
+
+extern void get_new_mmu_context(struct mm_struct *mm);
+#ifdef CONFIG_SMP
+extern void smp_new_mmu_context_version(void);
+#else
+#define smp_new_mmu_context_version() do { } while (0)
+#endif
+
+extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
+extern void destroy_context(struct mm_struct *mm);
+
+extern void __tsb_context_switch(unsigned long pgd_pa,
+				 struct tsb_config *tsb_base,
+				 struct tsb_config *tsb_huge,
+				 unsigned long tsb_descr_pa);
+
+static inline void tsb_context_switch(struct mm_struct *mm)
+{
+	__tsb_context_switch(__pa(mm->pgd),
+			     &mm->context.tsb_block[0],
+#ifdef CONFIG_HUGETLB_PAGE
+			     (mm->context.tsb_block[1].tsb ?
+			      &mm->context.tsb_block[1] :
+			      NULL)
+#else
+			     NULL
+#endif
+			     , __pa(&mm->context.tsb_descr[0]));
+}
+
+extern void tsb_grow(struct mm_struct *mm, unsigned long tsb_index, unsigned long mm_rss);
+#ifdef CONFIG_SMP
+extern void smp_tsb_sync(struct mm_struct *mm);
+#else
+#define smp_tsb_sync(__mm) do { } while (0)
+#endif
+
+/* Set MMU context in the actual hardware. */
+#define load_secondary_context(__mm) \
+	__asm__ __volatile__( \
+	"\n661:	stxa		%0, [%1] %2\n" \
+	"	.section	.sun4v_1insn_patch, \"ax\"\n" \
+	"	.word		661b\n" \
+	"	stxa		%0, [%1] %3\n" \
+	"	.previous\n" \
+	"	flush		%%g6\n" \
+	: /* No outputs */ \
+	: "r" (CTX_HWBITS((__mm)->context)), \
+	  "r" (SECONDARY_CONTEXT), "i" (ASI_DMMU), "i" (ASI_MMU))
+
+extern void __flush_tlb_mm(unsigned long, unsigned long);
+
+/* Switch the current MM context.  Interrupts are disabled.  */
+static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, struct task_struct *tsk)
+{
+	unsigned long ctx_valid, flags;
+	int cpu;
+
+	if (unlikely(mm == &init_mm))
+		return;
+
+	spin_lock_irqsave(&mm->context.lock, flags);
+	ctx_valid = CTX_VALID(mm->context);
+	if (!ctx_valid)
+		get_new_mmu_context(mm);
+
+	/* We have to be extremely careful here or else we will miss
+	 * a TSB grow if we switch back and forth between a kernel
+	 * thread and an address space which has it's TSB size increased
+	 * on another processor.
+	 *
+	 * It is possible to play some games in order to optimize the
+	 * switch, but the safest thing to do is to unconditionally
+	 * perform the secondary context load and the TSB context switch.
+	 *
+	 * For reference the bad case is, for address space "A":
+	 *
+	 *		CPU 0			CPU 1
+	 *	run address space A
+	 *	set cpu0's bits in cpu_vm_mask
+	 *	switch to kernel thread, borrow
+	 *	address space A via entry_lazy_tlb
+	 *					run address space A
+	 *					set cpu1's bit in cpu_vm_mask
+	 *					flush_tlb_pending()
+	 *					reset cpu_vm_mask to just cpu1
+	 *					TSB grow
+	 *	run address space A
+	 *	context was valid, so skip
+	 *	TSB context switch
+	 *
+	 * At that point cpu0 continues to use a stale TSB, the one from
+	 * before the TSB grow performed on cpu1.  cpu1 did not cross-call
+	 * cpu0 to update it's TSB because at that point the cpu_vm_mask
+	 * only had cpu1 set in it.
+	 */
+	load_secondary_context(mm);
+	tsb_context_switch(mm);
+
+	/* Any time a processor runs a context on an address space
+	 * for the first time, we must flush that context out of the
+	 * local TLB.
+	 */
+	cpu = smp_processor_id();
+	if (!ctx_valid || !cpu_isset(cpu, mm->cpu_vm_mask)) {
+		cpu_set(cpu, mm->cpu_vm_mask);
+		__flush_tlb_mm(CTX_HWBITS(mm->context),
+			       SECONDARY_CONTEXT);
+	}
+	spin_unlock_irqrestore(&mm->context.lock, flags);
+}
+
+#define deactivate_mm(tsk,mm)	do { } while (0)
+
+/* Activate a new MM instance for the current task. */
+static inline void activate_mm(struct mm_struct *active_mm, struct mm_struct *mm)
+{
+	unsigned long flags;
+	int cpu;
+
+	spin_lock_irqsave(&mm->context.lock, flags);
+	if (!CTX_VALID(mm->context))
+		get_new_mmu_context(mm);
+	cpu = smp_processor_id();
+	if (!cpu_isset(cpu, mm->cpu_vm_mask))
+		cpu_set(cpu, mm->cpu_vm_mask);
+
+	load_secondary_context(mm);
+	__flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT);
+	tsb_context_switch(mm);
+	spin_unlock_irqrestore(&mm->context.lock, flags);
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_MMU_CONTEXT_H) */
diff --git a/arch/sparc/include/asm/mmzone.h b/arch/sparc/include/asm/mmzone.h
new file mode 100644
index 000000000000..ebf5986c12ed
--- /dev/null
+++ b/arch/sparc/include/asm/mmzone.h
@@ -0,0 +1,17 @@
+#ifndef _SPARC64_MMZONE_H
+#define _SPARC64_MMZONE_H
+
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+
+extern struct pglist_data *node_data[];
+
+#define NODE_DATA(nid)		(node_data[nid])
+#define node_start_pfn(nid)	(NODE_DATA(nid)->node_start_pfn)
+#define node_end_pfn(nid)	(NODE_DATA(nid)->node_end_pfn)
+
+extern int numa_cpu_lookup_table[];
+extern cpumask_t numa_cpumask_lookup_table[];
+
+#endif /* CONFIG_NEED_MULTIPLE_NODES */
+
+#endif /* _SPARC64_MMZONE_H */
diff --git a/arch/sparc/include/asm/module.h b/arch/sparc/include/asm/module.h
new file mode 100644
index 000000000000..e82cf9a3e60e
--- /dev/null
+++ b/arch/sparc/include/asm/module.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MODULE_H
+#define ___ASM_SPARC_MODULE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/module_64.h>
+#else
+#include <asm/module_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/module_32.h b/arch/sparc/include/asm/module_32.h
new file mode 100644
index 000000000000..cbd9e67b0c0b
--- /dev/null
+++ b/arch/sparc/include/asm/module_32.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SPARC_MODULE_H
+#define _ASM_SPARC_MODULE_H
+struct mod_arch_specific { };
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+#endif /* _ASM_SPARC_MODULE_H */
diff --git a/arch/sparc/include/asm/module_64.h b/arch/sparc/include/asm/module_64.h
new file mode 100644
index 000000000000..3d77ba465783
--- /dev/null
+++ b/arch/sparc/include/asm/module_64.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_SPARC64_MODULE_H
+#define _ASM_SPARC64_MODULE_H
+struct mod_arch_specific { };
+#define Elf_Shdr Elf64_Shdr
+#define Elf_Sym Elf64_Sym
+#define Elf_Ehdr Elf64_Ehdr
+#endif /* _ASM_SPARC64_MODULE_H */
diff --git a/arch/sparc/include/asm/mostek.h b/arch/sparc/include/asm/mostek.h
new file mode 100644
index 000000000000..433be3e0a69b
--- /dev/null
+++ b/arch/sparc/include/asm/mostek.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_MOSTEK_H
+#define ___ASM_SPARC_MOSTEK_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/mostek_64.h>
+#else
+#include <asm/mostek_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/mostek_32.h b/arch/sparc/include/asm/mostek_32.h
new file mode 100644
index 000000000000..a99590c4c507
--- /dev/null
+++ b/arch/sparc/include/asm/mostek_32.h
@@ -0,0 +1,171 @@
+/*
+ * mostek.h:  Describes the various Mostek time of day clock registers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ * Added intersil code 05/25/98 Chris Davis (cdavis@cois.on.ca)
+ */
+
+#ifndef _SPARC_MOSTEK_H
+#define _SPARC_MOSTEK_H
+
+#include <asm/idprom.h>
+#include <asm/io.h>
+
+/*       M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
+ *
+ *                             Data
+ * Address                                                 Function
+ *        Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
+ *   7ff  -     -     -     -    -     -     -     -       Year 00-99
+ *   7fe  0     0     0     -    -     -     -     -      Month 01-12
+ *   7fd  0     0     -     -    -     -     -     -       Date 01-31
+ *   7fc  0     FT    0     0    0     -     -     -        Day 01-07
+ *   7fb  KS    0     -     -    -     -     -     -      Hours 00-23
+ *   7fa  0     -     -     -    -     -     -     -    Minutes 00-59
+ *   7f9  ST    -     -     -    -     -     -     -    Seconds 00-59
+ *   7f8  W     R     S     -    -     -     -     -    Control
+ *
+ *   * ST is STOP BIT
+ *   * W is WRITE BIT
+ *   * R is READ BIT
+ *   * S is SIGN BIT
+ *   * FT is FREQ TEST BIT
+ *   * KS is KICK START BIT
+ */
+
+/* The Mostek 48t02 real time clock and NVRAM chip. The registers
+ * other than the control register are in binary coded decimal. Some
+ * control bits also live outside the control register.
+ */
+#define mostek_read(_addr)		readb(_addr)
+#define mostek_write(_addr,_val)	writeb(_val, _addr)
+#define MOSTEK_EEPROM		0x0000UL
+#define MOSTEK_IDPROM		0x07d8UL
+#define MOSTEK_CREG		0x07f8UL
+#define MOSTEK_SEC		0x07f9UL
+#define MOSTEK_MIN		0x07faUL
+#define MOSTEK_HOUR		0x07fbUL
+#define MOSTEK_DOW		0x07fcUL
+#define MOSTEK_DOM		0x07fdUL
+#define MOSTEK_MONTH		0x07feUL
+#define MOSTEK_YEAR		0x07ffUL
+
+struct mostek48t02 {
+	volatile char eeprom[2008];	/* This is the eeprom, don't touch! */
+	struct idprom idprom;		/* The idprom lives here. */
+	volatile unsigned char creg;	/* Control register */
+	volatile unsigned char sec;	/* Seconds (0-59) */
+	volatile unsigned char min;	/* Minutes (0-59) */
+	volatile unsigned char hour;	/* Hour (0-23) */
+	volatile unsigned char dow;	/* Day of the week (1-7) */
+	volatile unsigned char dom;	/* Day of the month (1-31) */
+	volatile unsigned char month;	/* Month of year (1-12) */
+	volatile unsigned char year;	/* Year (0-99) */
+};
+
+extern spinlock_t mostek_lock;
+extern void __iomem *mstk48t02_regs;
+
+/* Control register values. */
+#define	MSTK_CREG_WRITE	0x80	/* Must set this before placing values. */
+#define	MSTK_CREG_READ	0x40	/* Stop updates to allow a clean read. */
+#define	MSTK_CREG_SIGN	0x20	/* Slow/speed clock in calibration mode. */
+
+/* Control bits that live in the other registers. */
+#define	MSTK_STOP	0x80	/* Stop the clock oscillator. (sec) */
+#define	MSTK_KICK_START	0x80	/* Kick start the clock chip. (hour) */
+#define MSTK_FREQ_TEST	0x40	/* Frequency test mode. (day) */
+
+#define MSTK_YEAR_ZERO       1968   /* If year reg has zero, it is 1968. */
+#define MSTK_CVT_YEAR(yr)  ((yr) + MSTK_YEAR_ZERO)
+
+/* Masks that define how much space each value takes up. */
+#define	MSTK_SEC_MASK	0x7f
+#define	MSTK_MIN_MASK	0x7f
+#define	MSTK_HOUR_MASK	0x3f
+#define	MSTK_DOW_MASK	0x07
+#define	MSTK_DOM_MASK	0x3f
+#define	MSTK_MONTH_MASK	0x1f
+#define	MSTK_YEAR_MASK	0xffU
+
+/* Binary coded decimal conversion macros. */
+#define MSTK_REGVAL_TO_DECIMAL(x)  (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
+#define MSTK_DECIMAL_TO_REGVAL(x)  ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
+
+/* Generic register set and get macros for internal use. */
+#define MSTK_GET(regs,var,mask) (MSTK_REGVAL_TO_DECIMAL(((struct mostek48t02 *)regs)->var & MSTK_ ## mask ## _MASK))
+#define MSTK_SET(regs,var,value,mask) do { ((struct mostek48t02 *)regs)->var &= ~(MSTK_ ## mask ## _MASK); ((struct mostek48t02 *)regs)->var |= MSTK_DECIMAL_TO_REGVAL(value) & (MSTK_ ## mask ## _MASK); } while (0)
+
+/* Macros to make register access easier on our fingers. These give you
+ * the decimal value of the register requested if applicable. You pass
+ * the a pointer to a 'struct mostek48t02'.
+ */
+#define	MSTK_REG_CREG(regs)	(((struct mostek48t02 *)regs)->creg)
+#define	MSTK_REG_SEC(regs)	MSTK_GET(regs,sec,SEC)
+#define	MSTK_REG_MIN(regs)	MSTK_GET(regs,min,MIN)
+#define	MSTK_REG_HOUR(regs)	MSTK_GET(regs,hour,HOUR)
+#define	MSTK_REG_DOW(regs)	MSTK_GET(regs,dow,DOW)
+#define	MSTK_REG_DOM(regs)	MSTK_GET(regs,dom,DOM)
+#define	MSTK_REG_MONTH(regs)	MSTK_GET(regs,month,MONTH)
+#define	MSTK_REG_YEAR(regs)	MSTK_GET(regs,year,YEAR)
+
+#define	MSTK_SET_REG_SEC(regs,value)	MSTK_SET(regs,sec,value,SEC)
+#define	MSTK_SET_REG_MIN(regs,value)	MSTK_SET(regs,min,value,MIN)
+#define	MSTK_SET_REG_HOUR(regs,value)	MSTK_SET(regs,hour,value,HOUR)
+#define	MSTK_SET_REG_DOW(regs,value)	MSTK_SET(regs,dow,value,DOW)
+#define	MSTK_SET_REG_DOM(regs,value)	MSTK_SET(regs,dom,value,DOM)
+#define	MSTK_SET_REG_MONTH(regs,value)	MSTK_SET(regs,month,value,MONTH)
+#define	MSTK_SET_REG_YEAR(regs,value)	MSTK_SET(regs,year,value,YEAR)
+
+
+/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
+ * same (basically) layout of the 48t02 chip except for the extra
+ * NVRAM on board (8 KB against the 48t02's 2 KB).
+ */
+struct mostek48t08 {
+	char offset[6*1024];         /* Magic things may be here, who knows? */
+	struct mostek48t02 regs;     /* Here is what we are interested in.   */
+};
+
+#ifdef CONFIG_SUN4
+enum sparc_clock_type {	MSTK48T02, MSTK48T08, \
+INTERSIL, MSTK_INVALID };
+#else
+enum sparc_clock_type {	MSTK48T02, MSTK48T08, \
+MSTK_INVALID };
+#endif
+
+#ifdef CONFIG_SUN4
+/* intersil on a sun 4/260 code  data from harris doc */
+struct intersil_dt {
+        volatile unsigned char int_csec;
+        volatile unsigned char int_hour;
+        volatile unsigned char int_min;
+        volatile unsigned char int_sec;
+        volatile unsigned char int_month;
+        volatile unsigned char int_day;
+        volatile unsigned char int_year;
+        volatile unsigned char int_dow;
+};
+
+struct intersil {
+	struct intersil_dt clk;
+	struct intersil_dt cmp;
+	volatile unsigned char int_intr_reg;
+	volatile unsigned char int_cmd_reg;
+};
+
+#define INTERSIL_STOP        0x0
+#define INTERSIL_START       0x8
+#define INTERSIL_INTR_DISABLE   0x0
+#define INTERSIL_INTR_ENABLE   0x10
+#define INTERSIL_32K		0x0
+#define INTERSIL_NORMAL		0x0
+#define INTERSIL_24H		0x4
+#define INTERSIL_INT_100HZ	0x2
+
+/* end of intersil info */
+#endif
+
+#endif /* !(_SPARC_MOSTEK_H) */
diff --git a/arch/sparc/include/asm/mostek_64.h b/arch/sparc/include/asm/mostek_64.h
new file mode 100644
index 000000000000..c5652de2ace2
--- /dev/null
+++ b/arch/sparc/include/asm/mostek_64.h
@@ -0,0 +1,143 @@
+/* mostek.h:  Describes the various Mostek time of day clock registers.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ */
+
+#ifndef _SPARC64_MOSTEK_H
+#define _SPARC64_MOSTEK_H
+
+#include <asm/idprom.h>
+
+/*       M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ)
+ *
+ *                             Data
+ * Address                                                 Function
+ *        Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0
+ *   7ff  -     -     -     -    -     -     -     -       Year 00-99
+ *   7fe  0     0     0     -    -     -     -     -      Month 01-12
+ *   7fd  0     0     -     -    -     -     -     -       Date 01-31
+ *   7fc  0     FT    0     0    0     -     -     -        Day 01-07
+ *   7fb  KS    0     -     -    -     -     -     -      Hours 00-23
+ *   7fa  0     -     -     -    -     -     -     -    Minutes 00-59
+ *   7f9  ST    -     -     -    -     -     -     -    Seconds 00-59
+ *   7f8  W     R     S     -    -     -     -     -    Control
+ *
+ *   * ST is STOP BIT
+ *   * W is WRITE BIT
+ *   * R is READ BIT
+ *   * S is SIGN BIT
+ *   * FT is FREQ TEST BIT
+ *   * KS is KICK START BIT
+ */
+
+/* The Mostek 48t02 real time clock and NVRAM chip. The registers
+ * other than the control register are in binary coded decimal. Some
+ * control bits also live outside the control register.
+ *
+ * We now deal with physical addresses for I/O to the chip. -DaveM
+ */
+static inline u8 mostek_read(void __iomem *addr)
+{
+	u8 ret;
+
+	__asm__ __volatile__("lduba	[%1] %2, %0"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+	return ret;
+}
+
+static inline void mostek_write(void __iomem *addr, u8 val)
+{
+	__asm__ __volatile__("stba	%0, [%1] %2"
+			     : /* no outputs */
+			     : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+#define MOSTEK_EEPROM		0x0000UL
+#define MOSTEK_IDPROM		0x07d8UL
+#define MOSTEK_CREG		0x07f8UL
+#define MOSTEK_SEC		0x07f9UL
+#define MOSTEK_MIN		0x07faUL
+#define MOSTEK_HOUR		0x07fbUL
+#define MOSTEK_DOW		0x07fcUL
+#define MOSTEK_DOM		0x07fdUL
+#define MOSTEK_MONTH		0x07feUL
+#define MOSTEK_YEAR		0x07ffUL
+
+extern spinlock_t mostek_lock;
+extern void __iomem *mstk48t02_regs;
+
+/* Control register values. */
+#define	MSTK_CREG_WRITE	0x80	/* Must set this before placing values. */
+#define	MSTK_CREG_READ	0x40	/* Stop updates to allow a clean read. */
+#define	MSTK_CREG_SIGN	0x20	/* Slow/speed clock in calibration mode. */
+
+/* Control bits that live in the other registers. */
+#define	MSTK_STOP	0x80	/* Stop the clock oscillator. (sec) */
+#define	MSTK_KICK_START	0x80	/* Kick start the clock chip. (hour) */
+#define MSTK_FREQ_TEST	0x40	/* Frequency test mode. (day) */
+
+#define MSTK_YEAR_ZERO       1968   /* If year reg has zero, it is 1968. */
+#define MSTK_CVT_YEAR(yr)  ((yr) + MSTK_YEAR_ZERO)
+
+/* Masks that define how much space each value takes up. */
+#define	MSTK_SEC_MASK	0x7f
+#define	MSTK_MIN_MASK	0x7f
+#define	MSTK_HOUR_MASK	0x3f
+#define	MSTK_DOW_MASK	0x07
+#define	MSTK_DOM_MASK	0x3f
+#define	MSTK_MONTH_MASK	0x1f
+#define	MSTK_YEAR_MASK	0xffU
+
+/* Binary coded decimal conversion macros. */
+#define MSTK_REGVAL_TO_DECIMAL(x)  (((x) & 0x0F) + 0x0A * ((x) >> 0x04))
+#define MSTK_DECIMAL_TO_REGVAL(x)  ((((x) / 0x0A) << 0x04) + ((x) % 0x0A))
+
+/* Generic register set and get macros for internal use. */
+#define MSTK_GET(regs,name)	\
+	(MSTK_REGVAL_TO_DECIMAL(mostek_read(regs + MOSTEK_ ## name) & MSTK_ ## name ## _MASK))
+#define MSTK_SET(regs,name,value) \
+do {	u8 __val = mostek_read(regs + MOSTEK_ ## name); \
+	__val &= ~(MSTK_ ## name ## _MASK); \
+	__val |= (MSTK_DECIMAL_TO_REGVAL(value) & \
+		  (MSTK_ ## name ## _MASK)); \
+	mostek_write(regs + MOSTEK_ ## name, __val); \
+} while(0)
+
+/* Macros to make register access easier on our fingers. These give you
+ * the decimal value of the register requested if applicable. You pass
+ * the a pointer to a 'struct mostek48t02'.
+ */
+#define	MSTK_REG_CREG(regs)	(mostek_read((regs) + MOSTEK_CREG))
+#define	MSTK_REG_SEC(regs)	MSTK_GET(regs,SEC)
+#define	MSTK_REG_MIN(regs)	MSTK_GET(regs,MIN)
+#define	MSTK_REG_HOUR(regs)	MSTK_GET(regs,HOUR)
+#define	MSTK_REG_DOW(regs)	MSTK_GET(regs,DOW)
+#define	MSTK_REG_DOM(regs)	MSTK_GET(regs,DOM)
+#define	MSTK_REG_MONTH(regs)	MSTK_GET(regs,MONTH)
+#define	MSTK_REG_YEAR(regs)	MSTK_GET(regs,YEAR)
+
+#define	MSTK_SET_REG_SEC(regs,value)	MSTK_SET(regs,SEC,value)
+#define	MSTK_SET_REG_MIN(regs,value)	MSTK_SET(regs,MIN,value)
+#define	MSTK_SET_REG_HOUR(regs,value)	MSTK_SET(regs,HOUR,value)
+#define	MSTK_SET_REG_DOW(regs,value)	MSTK_SET(regs,DOW,value)
+#define	MSTK_SET_REG_DOM(regs,value)	MSTK_SET(regs,DOM,value)
+#define	MSTK_SET_REG_MONTH(regs,value)	MSTK_SET(regs,MONTH,value)
+#define	MSTK_SET_REG_YEAR(regs,value)	MSTK_SET(regs,YEAR,value)
+
+
+/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the
+ * same (basically) layout of the 48t02 chip except for the extra
+ * NVRAM on board (8 KB against the 48t02's 2 KB).
+ */
+#define MOSTEK_48T08_OFFSET	0x0000UL	/* Lower NVRAM portions */
+#define MOSTEK_48T08_48T02	0x1800UL	/* Offset to 48T02 chip */
+
+/* SUN5 systems usually have 48t59 model clock chipsets.  But we keep the older
+ * clock chip definitions around just in case.
+ */
+#define MOSTEK_48T59_OFFSET	0x0000UL	/* Lower NVRAM portions */
+#define MOSTEK_48T59_48T02	0x1800UL	/* Offset to 48T02 chip */
+
+#endif /* !(_SPARC64_MOSTEK_H) */
diff --git a/arch/sparc/include/asm/mpmbox.h b/arch/sparc/include/asm/mpmbox.h
new file mode 100644
index 000000000000..f8423039b242
--- /dev/null
+++ b/arch/sparc/include/asm/mpmbox.h
@@ -0,0 +1,67 @@
+/*
+ * mpmbox.h:  Interface and defines for the OpenProm mailbox
+ *               facilities for MP machines under Linux.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MPMBOX_H
+#define _SPARC_MPMBOX_H
+
+/* The prom allocates, for each CPU on the machine an unsigned
+ * byte in physical ram.  You probe the device tree prom nodes
+ * for these values.  The purpose of this byte is to be able to
+ * pass messages from one cpu to another.
+ */
+
+/* These are the main message types we have to look for in our
+ * Cpu mailboxes, based upon these values we decide what course
+ * of action to take.
+ */
+
+/* The CPU is executing code in the kernel. */
+#define MAILBOX_ISRUNNING     0xf0
+
+/* Another CPU called romvec->pv_exit(), you should call
+ * prom_stopcpu() when you see this in your mailbox.
+ */
+#define MAILBOX_EXIT          0xfb
+
+/* Another CPU called romvec->pv_enter(), you should call
+ * prom_cpuidle() when this is seen.
+ */
+#define MAILBOX_GOSPIN        0xfc
+
+/* Another CPU has hit a breakpoint either into kadb or the prom
+ * itself.  Just like MAILBOX_GOSPIN, you should call prom_cpuidle()
+ * at this point.
+ */
+#define MAILBOX_BPT_SPIN      0xfd
+
+/* Oh geese, some other nitwit got a damn watchdog reset.  The party's
+ * over so go call prom_stopcpu().
+ */
+#define MAILBOX_WDOG_STOP     0xfe
+
+#ifndef __ASSEMBLY__
+
+/* Handy macro's to determine a cpu's state. */
+
+/* Is the cpu still in Power On Self Test? */
+#define MBOX_POST_P(letter)  ((letter) >= 0x00 && (letter) <= 0x7f)
+
+/* Is the cpu at the 'ok' prompt of the PROM? */
+#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f)
+
+/* Is the cpu spinning in the PROM? */
+#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef)
+
+/* Sanity check... This is junk mail, throw it out. */
+#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa)
+
+/* Is the cpu actively running an application/kernel-code? */
+#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_MPMBOX_H) */
diff --git a/arch/sparc/include/asm/msgbuf.h b/arch/sparc/include/asm/msgbuf.h
new file mode 100644
index 000000000000..efc7cbe9788f
--- /dev/null
+++ b/arch/sparc/include/asm/msgbuf.h
@@ -0,0 +1,38 @@
+#ifndef _SPARC_MSGBUF_H
+#define _SPARC_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for sparc64 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+#if defined(__sparc__) && defined(__arch64__)
+# define PADDING(x)
+#else
+# define PADDING(x) unsigned int x;
+#endif
+
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	PADDING(__pad1)
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	PADDING(__pad2)
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	PADDING(__pad3)
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused1;
+	unsigned long  __unused2;
+};
+#undef PADDING
+#endif /* _SPARC_MSGBUF_H */
diff --git a/arch/sparc/include/asm/msi.h b/arch/sparc/include/asm/msi.h
new file mode 100644
index 000000000000..724ca5667052
--- /dev/null
+++ b/arch/sparc/include/asm/msi.h
@@ -0,0 +1,31 @@
+/*
+ * msi.h:  Defines specific to the MBus - Sbus - Interface.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996 Eddie C. Dost   (ecd@skynet.be)
+ */
+
+#ifndef _SPARC_MSI_H
+#define _SPARC_MSI_H
+
+/*
+ * Locations of MSI Registers.
+ */
+#define MSI_MBUS_ARBEN	0xe0001008	/* MBus Arbiter Enable register */
+
+/*
+ * Useful bits in the MSI Registers.
+ */
+#define MSI_ASYNC_MODE  0x80000000	/* Operate the MSI asynchronously */
+
+
+static inline void msi_set_sync(void)
+{
+	__asm__ __volatile__ ("lda [%0] %1, %%g3\n\t"
+			      "andn %%g3, %2, %%g3\n\t"
+			      "sta %%g3, [%0] %1\n\t" : :
+			      "r" (MSI_MBUS_ARBEN),
+			      "i" (ASI_M_CTL), "r" (MSI_ASYNC_MODE) : "g3");
+}
+
+#endif /* !(_SPARC_MSI_H) */
diff --git a/arch/sparc/include/asm/mutex.h b/arch/sparc/include/asm/mutex.h
new file mode 100644
index 000000000000..458c1f7fbc18
--- /dev/null
+++ b/arch/sparc/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/sparc/include/asm/mxcc.h b/arch/sparc/include/asm/mxcc.h
new file mode 100644
index 000000000000..c0517bd05bde
--- /dev/null
+++ b/arch/sparc/include/asm/mxcc.h
@@ -0,0 +1,137 @@
+/*
+ * mxcc.h:  Definitions of the Viking MXCC registers
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_MXCC_H
+#define _SPARC_MXCC_H
+
+/* These registers are accessed through ASI 0x2. */
+#define MXCC_DATSTREAM       0x1C00000  /* Data stream register */
+#define MXCC_SRCSTREAM       0x1C00100  /* Source stream register */
+#define MXCC_DESSTREAM       0x1C00200  /* Destination stream register */
+#define MXCC_RMCOUNT         0x1C00300  /* Count of references and misses */
+#define MXCC_STEST           0x1C00804  /* Internal self-test */
+#define MXCC_CREG            0x1C00A04  /* Control register */
+#define MXCC_SREG            0x1C00B00  /* Status register */
+#define MXCC_RREG            0x1C00C04  /* Reset register */
+#define MXCC_EREG            0x1C00E00  /* Error code register */
+#define MXCC_PREG            0x1C00F04  /* Address port register */
+
+/* Some MXCC constants. */
+#define MXCC_STREAM_SIZE     0x20       /* Size in bytes of one stream r/w */
+
+/* The MXCC Control Register:
+ *
+ * ----------------------------------------------------------------------
+ * |                                   | RRC | RSV |PRE|MCE|PARE|ECE|RSV|
+ * ----------------------------------------------------------------------
+ *  31                              10    9    8-6   5   4    3   2  1-0
+ *
+ * RRC: Controls what you read from MXCC_RMCOUNT reg.
+ *      0=Misses 1=References
+ * PRE: Prefetch enable
+ * MCE: Multiple Command Enable
+ * PARE: Parity enable
+ * ECE: External cache enable
+ */
+
+#define MXCC_CTL_RRC   0x00000200
+#define MXCC_CTL_PRE   0x00000020
+#define MXCC_CTL_MCE   0x00000010
+#define MXCC_CTL_PARE  0x00000008
+#define MXCC_CTL_ECE   0x00000004
+
+/* The MXCC Error Register:
+ *
+ * --------------------------------------------------------
+ * |ME| RSV|CE|PEW|PEE|ASE|EIV| MOPC|ECODE|PRIV|RSV|HPADDR|
+ * --------------------------------------------------------
+ *  31   30 29  28  27  26  25 24-15  14-7   6  5-3   2-0
+ *
+ * ME: Multiple Errors have occurred
+ * CE: Cache consistency Error
+ * PEW: Parity Error during a Write operation
+ * PEE: Parity Error involving the External cache
+ * ASE: ASynchronous Error
+ * EIV: This register is toast
+ * MOPC: MXCC Operation Code for instance causing error
+ * ECODE: The Error CODE
+ * PRIV: A privileged mode error? 0=no 1=yes
+ * HPADDR: High PhysicalADDRess bits (35-32)
+ */
+
+#define MXCC_ERR_ME     0x80000000
+#define MXCC_ERR_CE     0x20000000
+#define MXCC_ERR_PEW    0x10000000
+#define MXCC_ERR_PEE    0x08000000
+#define MXCC_ERR_ASE    0x04000000
+#define MXCC_ERR_EIV    0x02000000
+#define MXCC_ERR_MOPC   0x01FF8000
+#define MXCC_ERR_ECODE  0x00007F80
+#define MXCC_ERR_PRIV   0x00000040
+#define MXCC_ERR_HPADDR 0x0000000f
+
+/* The MXCC Port register:
+ *
+ * -----------------------------------------------------
+ * |                | MID |                            |
+ * -----------------------------------------------------
+ *  31            21 20-18 17                         0
+ *
+ * MID: The moduleID of the cpu your read this from.
+ */
+
+#ifndef __ASSEMBLY__
+
+static inline void mxcc_set_stream_src(unsigned long *paddr)
+{
+	unsigned long data0 = paddr[0];
+	unsigned long data1 = paddr[1];
+
+	__asm__ __volatile__ ("or %%g0, %0, %%g2\n\t"
+			      "or %%g0, %1, %%g3\n\t"
+			      "stda %%g2, [%2] %3\n\t" : :
+			      "r" (data0), "r" (data1),
+			      "r" (MXCC_SRCSTREAM),
+			      "i" (ASI_M_MXCC) : "g2", "g3");
+}
+
+static inline void mxcc_set_stream_dst(unsigned long *paddr)
+{
+	unsigned long data0 = paddr[0];
+	unsigned long data1 = paddr[1];
+
+	__asm__ __volatile__ ("or %%g0, %0, %%g2\n\t"
+			      "or %%g0, %1, %%g3\n\t"
+			      "stda %%g2, [%2] %3\n\t" : :
+			      "r" (data0), "r" (data1),
+			      "r" (MXCC_DESSTREAM),
+			      "i" (ASI_M_MXCC) : "g2", "g3");
+}
+
+static inline unsigned long mxcc_get_creg(void)
+{
+	unsigned long mxcc_control;
+
+	__asm__ __volatile__("set 0xffffffff, %%g2\n\t"
+			     "set 0xffffffff, %%g3\n\t"
+			     "stda %%g2, [%1] %2\n\t"
+			     "lda [%3] %2, %0\n\t" :
+			     "=r" (mxcc_control) :
+			     "r" (MXCC_EREG), "i" (ASI_M_MXCC),
+			     "r" (MXCC_CREG) : "g2", "g3");
+	return mxcc_control;
+}
+
+static inline void mxcc_set_creg(unsigned long mxcc_control)
+{
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+			     "r" (mxcc_control), "r" (MXCC_CREG),
+			     "i" (ASI_M_MXCC));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_MXCC_H) */
diff --git a/arch/sparc/include/asm/ns87303.h b/arch/sparc/include/asm/ns87303.h
new file mode 100644
index 000000000000..686defe6aaa0
--- /dev/null
+++ b/arch/sparc/include/asm/ns87303.h
@@ -0,0 +1,118 @@
+/* ns87303.h: Configuration Register Description for the
+ *            National Semiconductor PC87303 (SuperIO).
+ *
+ * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _SPARC_NS87303_H
+#define _SPARC_NS87303_H 1
+
+/*
+ * Control Register Index Values
+ */
+#define FER	0x00
+#define FAR	0x01
+#define PTR	0x02
+#define FCR	0x03
+#define PCR	0x04
+#define KRR	0x05
+#define PMC	0x06
+#define TUP	0x07
+#define SID	0x08
+#define ASC	0x09
+#define CS0CF0	0x0a
+#define CS0CF1	0x0b
+#define CS1CF0	0x0c
+#define CS1CF1	0x0d
+
+/* Function Enable Register (FER) bits */
+#define FER_EDM		0x10	/* Encoded Drive and Motor pin information   */
+
+/* Function Address Register (FAR) bits */
+#define FAR_LPT_MASK	0x03
+#define FAR_LPTB	0x00
+#define FAR_LPTA	0x01
+#define FAR_LPTC	0x02
+
+/* Power and Test Register (PTR) bits */
+#define PTR_LPTB_IRQ7	0x08
+#define PTR_LEVEL_IRQ	0x80	/* When not ECP/EPP: Use level IRQ           */
+#define PTR_LPT_REG_DIR	0x80	/* When ECP/EPP: LPT CTR controlls direction */
+				/*               of the parallel port	     */
+
+/* Function Control Register (FCR) bits */
+#define FCR_LDE		0x10	/* Logical Drive Exchange                    */
+#define FCR_ZWS_ENA	0x20	/* Enable short host read/write in ECP/EPP   */
+
+/* Printer Control Register (PCR) bits */
+#define PCR_EPP_ENABLE	0x01
+#define PCR_EPP_IEEE	0x02	/* Enable EPP Version 1.9 (IEEE 1284)        */
+#define PCR_ECP_ENABLE	0x04
+#define PCR_ECP_CLK_ENA	0x08	/* If 0 ECP Clock is stopped on Power down   */
+#define PCR_IRQ_POLAR	0x20	/* If 0 IRQ is level high or negative pulse, */
+				/* if 1 polarity is inverted                 */
+#define PCR_IRQ_ODRAIN	0x40	/* If 1, IRQ is open drain                   */
+
+/* Tape UARTs and Parallel Port Config Register (TUP) bits */
+#define TUP_EPP_TIMO	0x02	/* Enable EPP timeout IRQ                    */
+
+/* Advanced SuperIO Config Register (ASC) bits */
+#define ASC_LPT_IRQ7	0x01	/* Always use IRQ7 for LPT                  */
+#define ASC_DRV2_SEL	0x02	/* Logical Drive Exchange controlled by TDR  */
+
+#define FER_RESERVED	0x00
+#define FAR_RESERVED	0x00
+#define PTR_RESERVED	0x73
+#define FCR_RESERVED	0xc4
+#define PCR_RESERVED	0x10
+#define KRR_RESERVED	0x00
+#define PMC_RESERVED	0x98
+#define TUP_RESERVED	0xfb
+#define SIP_RESERVED	0x00
+#define ASC_RESERVED	0x18
+#define CS0CF0_RESERVED	0x00
+#define CS0CF1_RESERVED	0x08
+#define CS1CF0_RESERVED	0x00
+#define CS1CF1_RESERVED	0x08
+
+#ifdef __KERNEL__
+
+#include <linux/spinlock.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+
+extern spinlock_t ns87303_lock;
+
+static inline int ns87303_modify(unsigned long port, unsigned int index,
+				     unsigned char clr, unsigned char set)
+{
+	static unsigned char reserved[] = {
+		FER_RESERVED, FAR_RESERVED, PTR_RESERVED, FCR_RESERVED,
+		PCR_RESERVED, KRR_RESERVED, PMC_RESERVED, TUP_RESERVED,
+		SIP_RESERVED, ASC_RESERVED, CS0CF0_RESERVED, CS0CF1_RESERVED,
+		CS1CF0_RESERVED, CS1CF1_RESERVED
+	};
+	unsigned long flags;
+	unsigned char value;
+
+	if (index > 0x0d)
+		return -EINVAL;
+
+	spin_lock_irqsave(&ns87303_lock, flags);
+
+	outb(index, port);
+	value = inb(port + 1);
+	value &= ~(reserved[index] | clr);
+	value |= set;
+	outb(value, port + 1);
+	outb(value, port + 1);
+
+	spin_unlock_irqrestore(&ns87303_lock, flags);
+
+	return 0;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* !(_SPARC_NS87303_H) */
diff --git a/arch/sparc/include/asm/obio.h b/arch/sparc/include/asm/obio.h
new file mode 100644
index 000000000000..1a7544ceb574
--- /dev/null
+++ b/arch/sparc/include/asm/obio.h
@@ -0,0 +1,249 @@
+/*
+ * obio.h:  Some useful locations in 0xFXXXXXXXX PA obio space on sun4d.
+ *
+ * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
+ */
+
+#ifndef _SPARC_OBIO_H
+#define _SPARC_OBIO_H
+
+#include <asm/asi.h>
+
+/* This weird monster likes to use the very upper parts of
+   36bit PA for these things :) */
+   
+/* CSR space (for each XDBUS)
+ *  ------------------------------------------------------------------------
+ *  |   0xFE  |   DEVID    |                | XDBUS ID |                   |
+ *  ------------------------------------------------------------------------
+ *  35      28 27        20 19            10 9        8 7                 0
+ */
+   
+#define CSR_BASE_ADDR		0xe0000000
+#define CSR_CPU_SHIFT		(32 - 4 - 5)
+#define CSR_XDBUS_SHIFT		8
+
+#define CSR_BASE(cpu) (((CSR_BASE_ADDR >> CSR_CPU_SHIFT) + cpu) << CSR_CPU_SHIFT)
+
+/* ECSR space (not for each XDBUS)
+ *  ------------------------------------------------------------------------
+ *  |   0xF  | DEVID[7:1] |                			           |
+ *  ------------------------------------------------------------------------
+ *  35     32 31        25 24                 				  0
+ */
+   
+#define ECSR_BASE_ADDR		0x00000000
+#define ECSR_CPU_SHIFT		(32 - 5)
+#define ECSR_DEV_SHIFT		(32 - 8)
+
+#define ECSR_BASE(cpu) ((cpu) << ECSR_CPU_SHIFT)
+#define ECSR_DEV_BASE(devid) ((devid) << ECSR_DEV_SHIFT) 
+
+/* Bus Watcher */
+#define BW_LOCAL_BASE		0xfff00000
+
+#define BW_CID			0x00000000
+#define BW_DBUS_CTRL		0x00000008
+#define BW_DBUS_DATA		0x00000010
+#define BW_CTRL			0x00001000
+#define BW_INTR_TABLE		0x00001040
+#define BW_INTR_TABLE_CLEAR	0x00001080
+#define BW_PRESCALER		0x000010c0
+#define BW_PTIMER_LIMIT		0x00002000
+#define BW_PTIMER_COUNTER2	0x00002004
+#define BW_PTIMER_NDLIMIT	0x00002008
+#define BW_PTIMER_CTRL		0x0000200c
+#define BW_PTIMER_COUNTER	0x00002010
+#define BW_TIMER_LIMIT		0x00003000
+#define BW_TIMER_COUNTER2	0x00003004
+#define BW_TIMER_NDLIMIT	0x00003008
+#define BW_TIMER_CTRL		0x0000300c
+#define BW_TIMER_COUNTER	0x00003010
+
+/* BW Control */
+#define BW_CTRL_USER_TIMER	0x00000004	/* Is User Timer Free run enabled */
+
+/* Boot Bus */
+#define BB_LOCAL_BASE		0xf0000000
+
+#define BB_STAT1		0x00100000
+#define BB_STAT2		0x00120000
+#define BB_STAT3		0x00140000
+#define BB_LEDS			0x002e0000
+
+/* Bits in BB_STAT2 */
+#define BB_STAT2_AC_INTR	0x04	/* Aiee! 5ms and power is gone... */
+#define BB_STAT2_TMP_INTR	0x10	/* My Penguins are burning. Are you able to smell it? */
+#define BB_STAT2_FAN_INTR	0x20	/* My fan refuses to work */
+#define BB_STAT2_PWR_INTR	0x40	/* On SC2000, one of the two ACs died. Ok, we go on... */
+#define BB_STAT2_MASK		(BB_STAT2_AC_INTR|BB_STAT2_TMP_INTR|BB_STAT2_FAN_INTR|BB_STAT2_PWR_INTR)
+
+/* Cache Controller */
+#define CC_BASE		0x1F00000
+#define CC_DATSTREAM	0x1F00000  /* Data stream register */
+#define CC_DATSIZE	0x1F0003F  /* Size */
+#define CC_SRCSTREAM	0x1F00100  /* Source stream register */
+#define CC_DESSTREAM	0x1F00200  /* Destination stream register */
+#define CC_RMCOUNT	0x1F00300  /* Count of references and misses */
+#define CC_IPEN		0x1F00406  /* Pending Interrupts */
+#define CC_IMSK		0x1F00506  /* Interrupt Mask */
+#define CC_ICLR		0x1F00606  /* Clear pending Interrupts */
+#define CC_IGEN		0x1F00704  /* Generate Interrupt register */
+#define CC_STEST	0x1F00804  /* Internal self-test */
+#define CC_CREG		0x1F00A04  /* Control register */
+#define CC_SREG		0x1F00B00  /* Status register */
+#define CC_RREG		0x1F00C04  /* Reset register */
+#define CC_EREG		0x1F00E00  /* Error code register */
+#define CC_CID		0x1F00F04  /* Component ID */
+
+#ifndef __ASSEMBLY__
+
+static inline int bw_get_intr_mask(int sbus_level)
+{
+	int mask;
+	
+	__asm__ __volatile__ ("lduha [%1] %2, %0" :
+			      "=r" (mask) :
+			      "r" (BW_LOCAL_BASE + BW_INTR_TABLE + (sbus_level << 3)),
+			      "i" (ASI_M_CTL));
+	return mask;
+}
+
+static inline void bw_clear_intr_mask(int sbus_level, int mask)
+{
+	__asm__ __volatile__ ("stha %0, [%1] %2" : :
+			      "r" (mask),
+			      "r" (BW_LOCAL_BASE + BW_INTR_TABLE_CLEAR + (sbus_level << 3)),
+			      "i" (ASI_M_CTL));
+}
+
+static inline unsigned bw_get_prof_limit(int cpu)
+{
+	unsigned limit;
+	
+	__asm__ __volatile__ ("lda [%1] %2, %0" :
+			      "=r" (limit) :
+			      "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT),
+			      "i" (ASI_M_CTL));
+	return limit;
+}
+
+static inline void bw_set_prof_limit(int cpu, unsigned limit)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (limit),
+			      "r" (CSR_BASE(cpu) + BW_PTIMER_LIMIT),
+			      "i" (ASI_M_CTL));
+}
+
+static inline unsigned bw_get_ctrl(int cpu)
+{
+	unsigned ctrl;
+	
+	__asm__ __volatile__ ("lda [%1] %2, %0" :
+			      "=r" (ctrl) :
+			      "r" (CSR_BASE(cpu) + BW_CTRL),
+			      "i" (ASI_M_CTL));
+	return ctrl;
+}
+
+static inline void bw_set_ctrl(int cpu, unsigned ctrl)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (ctrl),
+			      "r" (CSR_BASE(cpu) + BW_CTRL),
+			      "i" (ASI_M_CTL));
+}
+
+extern unsigned char cpu_leds[32];
+
+static inline void show_leds(int cpuid)
+{
+	cpuid &= 0x1e;
+	__asm__ __volatile__ ("stba %0, [%1] %2" : :
+			      "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]),
+			      "r" (ECSR_BASE(cpuid) | BB_LEDS),
+			      "i" (ASI_M_CTL));
+}
+
+static inline unsigned cc_get_ipen(void)
+{
+	unsigned pending;
+	
+	__asm__ __volatile__ ("lduha [%1] %2, %0" :
+			      "=r" (pending) :
+			      "r" (CC_IPEN),
+			      "i" (ASI_M_MXCC));
+	return pending;
+}
+
+static inline void cc_set_iclr(unsigned clear)
+{
+	__asm__ __volatile__ ("stha %0, [%1] %2" : :
+			      "r" (clear),
+			      "r" (CC_ICLR),
+			      "i" (ASI_M_MXCC));
+}
+
+static inline unsigned cc_get_imsk(void)
+{
+	unsigned mask;
+	
+	__asm__ __volatile__ ("lduha [%1] %2, %0" :
+			      "=r" (mask) :
+			      "r" (CC_IMSK),
+			      "i" (ASI_M_MXCC));
+	return mask;
+}
+
+static inline void cc_set_imsk(unsigned mask)
+{
+	__asm__ __volatile__ ("stha %0, [%1] %2" : :
+			      "r" (mask),
+			      "r" (CC_IMSK),
+			      "i" (ASI_M_MXCC));
+}
+
+static inline unsigned cc_get_imsk_other(int cpuid)
+{
+	unsigned mask;
+	
+	__asm__ __volatile__ ("lduha [%1] %2, %0" :
+			      "=r" (mask) :
+			      "r" (ECSR_BASE(cpuid) | CC_IMSK),
+			      "i" (ASI_M_CTL));
+	return mask;
+}
+
+static inline void cc_set_imsk_other(int cpuid, unsigned mask)
+{
+	__asm__ __volatile__ ("stha %0, [%1] %2" : :
+			      "r" (mask),
+			      "r" (ECSR_BASE(cpuid) | CC_IMSK),
+			      "i" (ASI_M_CTL));
+}
+
+static inline void cc_set_igen(unsigned gen)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (gen),
+			      "r" (CC_IGEN),
+			      "i" (ASI_M_MXCC));
+}
+
+/* +-------+-------------+-----------+------------------------------------+
+ * | bcast |  devid      |   sid     |              levels mask           |
+ * +-------+-------------+-----------+------------------------------------+
+ *  31      30         23 22       15 14                                 0
+ */
+#define IGEN_MESSAGE(bcast, devid, sid, levels) \
+	(((bcast) << 31) | ((devid) << 23) | ((sid) << 15) | (levels))
+            
+static inline void sun4d_send_ipi(int cpu, int level)
+{
+	cc_set_igen(IGEN_MESSAGE(0, cpu << 3, 6 + ((level >> 1) & 7), 1 << (level - 1)));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_OBIO_H) */
diff --git a/arch/sparc/include/asm/of_device.h b/arch/sparc/include/asm/of_device.h
new file mode 100644
index 000000000000..e5f5aedc2293
--- /dev/null
+++ b/arch/sparc/include/asm/of_device.h
@@ -0,0 +1,38 @@
+#ifndef _ASM_SPARC_OF_DEVICE_H
+#define _ASM_SPARC_OF_DEVICE_H
+#ifdef __KERNEL__
+
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/mod_devicetable.h>
+#include <asm/openprom.h>
+
+/*
+ * The of_device is a kind of "base class" that is a superset of
+ * struct device for use by devices attached to an OF node and
+ * probed using OF properties.
+ */
+struct of_device
+{
+	struct device_node		*node;
+	struct device			dev;
+	struct resource			resource[PROMREG_MAX];
+	unsigned int			irqs[PROMINTR_MAX];
+	int				num_irqs;
+
+	void				*sysdata;
+
+	int				slot;
+	int				portid;
+	int				clock_freq;
+};
+
+extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name);
+extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size);
+
+/* These are just here during the transition */
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_SPARC_OF_DEVICE_H */
diff --git a/arch/sparc/include/asm/of_platform.h b/arch/sparc/include/asm/of_platform.h
new file mode 100644
index 000000000000..93a262c44022
--- /dev/null
+++ b/arch/sparc/include/asm/of_platform.h
@@ -0,0 +1,24 @@
+#ifndef ___ASM_SPARC_OF_PLATFORM_H
+#define ___ASM_SPARC_OF_PLATFORM_H
+/*
+ *    Copyright (C) 2006 Benjamin Herrenschmidt, IBM Corp.
+ *			 <benh@kernel.crashing.org>
+ *    Modified for Sparc by merging parts of asm/of_device.h
+ *		by Stephen Rothwell
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version
+ *  2 of the License, or (at your option) any later version.
+ *
+ */
+
+/* This is just here during the transition */
+#include <linux/of_platform.h>
+
+extern struct bus_type ebus_bus_type;
+extern struct bus_type sbus_bus_type;
+
+#define of_bus_type	of_platform_bus_type	/* for compatibility */
+
+#endif
diff --git a/arch/sparc/include/asm/openprom.h b/arch/sparc/include/asm/openprom.h
new file mode 100644
index 000000000000..aaeae905ed3f
--- /dev/null
+++ b/arch/sparc/include/asm/openprom.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_OPENPROM_H
+#define ___ASM_SPARC_OPENPROM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/openprom_64.h>
+#else
+#include <asm/openprom_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/openprom_32.h b/arch/sparc/include/asm/openprom_32.h
new file mode 100644
index 000000000000..8b1649f29ed9
--- /dev/null
+++ b/arch/sparc/include/asm/openprom_32.h
@@ -0,0 +1,255 @@
+#ifndef __SPARC_OPENPROM_H
+#define __SPARC_OPENPROM_H
+
+/* openprom.h:  Prom structures and defines for access to the OPENBOOT
+ *              prom routines and data areas.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* Empirical constants... */
+#define	LINUX_OPPROM_MAGIC      0x10010407
+
+#ifndef __ASSEMBLY__
+/* V0 prom device operations. */
+struct linux_dev_v0_funcs {
+	int (*v0_devopen)(char *device_str);
+	int (*v0_devclose)(int dev_desc);
+	int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
+};
+
+/* V2 and later prom device operations. */
+struct linux_dev_v2_funcs {
+	int (*v2_inst2pkg)(int d);	/* Convert ihandle to phandle */
+	char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
+	void (*v2_dumb_mem_free)(char *va, unsigned sz);
+
+	/* To map devices into virtual I/O space. */
+	char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
+	void (*v2_dumb_munmap)(char *virta, unsigned size);
+
+	int (*v2_dev_open)(char *devpath);
+	void (*v2_dev_close)(int d);
+	int (*v2_dev_read)(int d, char *buf, int nbytes);
+	int (*v2_dev_write)(int d, char *buf, int nbytes);
+	int (*v2_dev_seek)(int d, int hi, int lo);
+
+	/* Never issued (multistage load support) */
+	void (*v2_wheee2)(void);
+	void (*v2_wheee3)(void);
+};
+
+struct linux_mlist_v0 {
+	struct linux_mlist_v0 *theres_more;
+	char *start_adr;
+	unsigned num_bytes;
+};
+
+struct linux_mem_v0 {
+	struct linux_mlist_v0 **v0_totphys;
+	struct linux_mlist_v0 **v0_prommap;
+	struct linux_mlist_v0 **v0_available; /* What we can use */
+};
+
+/* Arguments sent to the kernel from the boot prompt. */
+struct linux_arguments_v0 {
+	char *argv[8];
+	char args[100];
+	char boot_dev[2];
+	int boot_dev_ctrl;
+	int boot_dev_unit;
+	int dev_partition;
+	char *kernel_file_name;
+	void *aieee1;           /* XXX */
+};
+
+/* V2 and up boot things. */
+struct linux_bootargs_v2 {
+	char **bootpath;
+	char **bootargs;
+	int *fd_stdin;
+	int *fd_stdout;
+};
+
+/* The top level PROM vector. */
+struct linux_romvec {
+	/* Version numbers. */
+	unsigned int pv_magic_cookie;
+	unsigned int pv_romvers;
+	unsigned int pv_plugin_revision;
+	unsigned int pv_printrev;
+
+	/* Version 0 memory descriptors. */
+	struct linux_mem_v0 pv_v0mem;
+
+	/* Node operations. */
+	struct linux_nodeops *pv_nodeops;
+
+	char **pv_bootstr;
+	struct linux_dev_v0_funcs pv_v0devops;
+
+	char *pv_stdin;
+	char *pv_stdout;
+#define	PROMDEV_KBD	0		/* input from keyboard */
+#define	PROMDEV_SCREEN	0		/* output to screen */
+#define	PROMDEV_TTYA	1		/* in/out to ttya */
+#define	PROMDEV_TTYB	2		/* in/out to ttyb */
+
+	/* Blocking getchar/putchar.  NOT REENTRANT! (grr) */
+	int (*pv_getchar)(void);
+	void (*pv_putchar)(int ch);
+
+	/* Non-blocking variants. */
+	int (*pv_nbgetchar)(void);
+	int (*pv_nbputchar)(int ch);
+
+	void (*pv_putstr)(char *str, int len);
+
+	/* Miscellany. */
+	void (*pv_reboot)(char *bootstr);
+	void (*pv_printf)(__const__ char *fmt, ...);
+	void (*pv_abort)(void);
+	__volatile__ int *pv_ticks;
+	void (*pv_halt)(void);
+	void (**pv_synchook)(void);
+
+	/* Evaluate a forth string, not different proto for V0 and V2->up. */
+	union {
+		void (*v0_eval)(int len, char *str);
+		void (*v2_eval)(char *str);
+	} pv_fortheval;
+
+	struct linux_arguments_v0 **pv_v0bootargs;
+
+	/* Get ether address. */
+	unsigned int (*pv_enaddr)(int d, char *enaddr);
+
+	struct linux_bootargs_v2 pv_v2bootargs;
+	struct linux_dev_v2_funcs pv_v2devops;
+
+	int filler[15];
+
+	/* This one is sun4c/sun4 only. */
+	void (*pv_setctxt)(int ctxt, char *va, int pmeg);
+
+	/* Prom version 3 Multiprocessor routines. This stuff is crazy.
+	 * No joke. Calling these when there is only one cpu probably
+	 * crashes the machine, have to test this. :-)
+	 */
+
+	/* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
+	 * 'thiscontext' executing at address 'prog_counter'
+	 */
+	int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
+			   int thiscontext, char *prog_counter);
+
+	/* v3_cpustop() will cause cpu 'whichcpu' to stop executing
+	 * until a resume cpu call is made.
+	 */
+	int (*v3_cpustop)(unsigned int whichcpu);
+
+	/* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
+	 * resume cpu call is made.
+	 */
+	int (*v3_cpuidle)(unsigned int whichcpu);
+
+	/* v3_cpuresume() will resume processor 'whichcpu' executing
+	 * starting with whatever 'pc' and 'npc' were left at the
+	 * last 'idle' or 'stop' call.
+	 */
+	int (*v3_cpuresume)(unsigned int whichcpu);
+};
+
+/* Routines for traversing the prom device tree. */
+struct linux_nodeops {
+	int (*no_nextnode)(int node);
+	int (*no_child)(int node);
+	int (*no_proplen)(int node, char *name);
+	int (*no_getprop)(int node, char *name, char *val);
+	int (*no_setprop)(int node, char *name, char *val, int len);
+	char * (*no_nextprop)(int node, char *name);
+};
+
+/* More fun PROM structures for device probing. */
+#define PROMREG_MAX     16
+#define PROMVADDR_MAX   16
+#define PROMINTR_MAX    15
+
+struct linux_prom_registers {
+	unsigned int which_io;         /* is this in OBIO space? */
+	unsigned int phys_addr;        /* The physical address of this register */
+	unsigned int reg_size;         /* How many bytes does this register take up? */
+};
+
+struct linux_prom_irqs {
+	int pri;    /* IRQ priority */
+	int vector; /* This is foobar, what does it do? */
+};
+
+/* Element of the "ranges" vector */
+struct linux_prom_ranges {
+	unsigned int ot_child_space;
+	unsigned int ot_child_base;		/* Bus feels this */
+	unsigned int ot_parent_space;
+	unsigned int ot_parent_base;		/* CPU looks from here */
+	unsigned int or_size;
+};
+
+/* Ranges and reg properties are a bit different for PCI. */
+struct linux_prom_pci_registers {
+	/*
+	 * We don't know what information this field contain.
+	 * We guess, PCI device function is in bits 15:8
+	 * So, ...
+	 */
+	unsigned int which_io;  /* Let it be which_io */
+
+	unsigned int phys_hi;
+	unsigned int phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_pci_ranges {
+	unsigned int child_phys_hi;	/* Only certain bits are encoded here. */
+	unsigned int child_phys_mid;
+	unsigned int child_phys_lo;
+
+	unsigned int parent_phys_hi;
+	unsigned int parent_phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_pci_assigned_addresses {
+	unsigned int which_io;
+
+	unsigned int phys_hi;
+	unsigned int phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_ebus_ranges {
+	unsigned int child_phys_hi;
+	unsigned int child_phys_lo;
+
+	unsigned int parent_phys_hi;
+	unsigned int parent_phys_mid;
+	unsigned int parent_phys_lo;
+
+	unsigned int size;
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_OPENPROM_H) */
diff --git a/arch/sparc/include/asm/openprom_64.h b/arch/sparc/include/asm/openprom_64.h
new file mode 100644
index 000000000000..b69e4a8c9170
--- /dev/null
+++ b/arch/sparc/include/asm/openprom_64.h
@@ -0,0 +1,280 @@
+#ifndef __SPARC64_OPENPROM_H
+#define __SPARC64_OPENPROM_H
+
+/* openprom.h:  Prom structures and defines for access to the OPENBOOT
+ *              prom routines and data areas.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASSEMBLY__
+/* V0 prom device operations. */
+struct linux_dev_v0_funcs {
+	int (*v0_devopen)(char *device_str);
+	int (*v0_devclose)(int dev_desc);
+	int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+	int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
+	int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+	int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
+};
+
+/* V2 and later prom device operations. */
+struct linux_dev_v2_funcs {
+	int (*v2_inst2pkg)(int d);	/* Convert ihandle to phandle */
+	char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
+	void (*v2_dumb_mem_free)(char *va, unsigned sz);
+
+	/* To map devices into virtual I/O space. */
+	char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
+	void (*v2_dumb_munmap)(char *virta, unsigned size);
+
+	int (*v2_dev_open)(char *devpath);
+	void (*v2_dev_close)(int d);
+	int (*v2_dev_read)(int d, char *buf, int nbytes);
+	int (*v2_dev_write)(int d, char *buf, int nbytes);
+	int (*v2_dev_seek)(int d, int hi, int lo);
+
+	/* Never issued (multistage load support) */
+	void (*v2_wheee2)(void);
+	void (*v2_wheee3)(void);
+};
+
+struct linux_mlist_v0 {
+	struct linux_mlist_v0 *theres_more;
+	unsigned start_adr;
+	unsigned num_bytes;
+};
+
+struct linux_mem_v0 {
+	struct linux_mlist_v0 **v0_totphys;
+	struct linux_mlist_v0 **v0_prommap;
+	struct linux_mlist_v0 **v0_available; /* What we can use */
+};
+
+/* Arguments sent to the kernel from the boot prompt. */
+struct linux_arguments_v0 {
+	char *argv[8];
+	char args[100];
+	char boot_dev[2];
+	int boot_dev_ctrl;
+	int boot_dev_unit;
+	int dev_partition;
+	char *kernel_file_name;
+	void *aieee1;           /* XXX */
+};
+
+/* V2 and up boot things. */
+struct linux_bootargs_v2 {
+	char **bootpath;
+	char **bootargs;
+	int *fd_stdin;
+	int *fd_stdout;
+};
+
+/* The top level PROM vector. */
+struct linux_romvec {
+	/* Version numbers. */
+	unsigned int pv_magic_cookie;
+	unsigned int pv_romvers;
+	unsigned int pv_plugin_revision;
+	unsigned int pv_printrev;
+
+	/* Version 0 memory descriptors. */
+	struct linux_mem_v0 pv_v0mem;
+
+	/* Node operations. */
+	struct linux_nodeops *pv_nodeops;
+
+	char **pv_bootstr;
+	struct linux_dev_v0_funcs pv_v0devops;
+
+	char *pv_stdin;
+	char *pv_stdout;
+#define	PROMDEV_KBD	0		/* input from keyboard */
+#define	PROMDEV_SCREEN	0		/* output to screen */
+#define	PROMDEV_TTYA	1		/* in/out to ttya */
+#define	PROMDEV_TTYB	2		/* in/out to ttyb */
+
+	/* Blocking getchar/putchar.  NOT REENTRANT! (grr) */
+	int (*pv_getchar)(void);
+	void (*pv_putchar)(int ch);
+
+	/* Non-blocking variants. */
+	int (*pv_nbgetchar)(void);
+	int (*pv_nbputchar)(int ch);
+
+	void (*pv_putstr)(char *str, int len);
+
+	/* Miscellany. */
+	void (*pv_reboot)(char *bootstr);
+	void (*pv_printf)(__const__ char *fmt, ...);
+	void (*pv_abort)(void);
+	__volatile__ int *pv_ticks;
+	void (*pv_halt)(void);
+	void (**pv_synchook)(void);
+
+	/* Evaluate a forth string, not different proto for V0 and V2->up. */
+	union {
+		void (*v0_eval)(int len, char *str);
+		void (*v2_eval)(char *str);
+	} pv_fortheval;
+
+	struct linux_arguments_v0 **pv_v0bootargs;
+
+	/* Get ether address. */
+	unsigned int (*pv_enaddr)(int d, char *enaddr);
+
+	struct linux_bootargs_v2 pv_v2bootargs;
+	struct linux_dev_v2_funcs pv_v2devops;
+
+	int filler[15];
+
+	/* This one is sun4c/sun4 only. */
+	void (*pv_setctxt)(int ctxt, char *va, int pmeg);
+
+	/* Prom version 3 Multiprocessor routines. This stuff is crazy.
+	 * No joke. Calling these when there is only one cpu probably
+	 * crashes the machine, have to test this. :-)
+	 */
+
+	/* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
+	 * 'thiscontext' executing at address 'prog_counter'
+	 */
+	int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
+			   int thiscontext, char *prog_counter);
+
+	/* v3_cpustop() will cause cpu 'whichcpu' to stop executing
+	 * until a resume cpu call is made.
+	 */
+	int (*v3_cpustop)(unsigned int whichcpu);
+
+	/* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
+	 * resume cpu call is made.
+	 */
+	int (*v3_cpuidle)(unsigned int whichcpu);
+
+	/* v3_cpuresume() will resume processor 'whichcpu' executing
+	 * starting with whatever 'pc' and 'npc' were left at the
+	 * last 'idle' or 'stop' call.
+	 */
+	int (*v3_cpuresume)(unsigned int whichcpu);
+};
+
+/* Routines for traversing the prom device tree. */
+struct linux_nodeops {
+	int (*no_nextnode)(int node);
+	int (*no_child)(int node);
+	int (*no_proplen)(int node, char *name);
+	int (*no_getprop)(int node, char *name, char *val);
+	int (*no_setprop)(int node, char *name, char *val, int len);
+	char * (*no_nextprop)(int node, char *name);
+};
+
+/* More fun PROM structures for device probing. */
+#define PROMREG_MAX     24
+#define PROMVADDR_MAX   16
+#define PROMINTR_MAX    32
+
+struct linux_prom_registers {
+	unsigned which_io;	/* hi part of physical address			*/
+	unsigned phys_addr;	/* The physical address of this register	*/
+	int reg_size;		/* How many bytes does this register take up?	*/
+};
+
+struct linux_prom64_registers {
+	unsigned long phys_addr;
+	unsigned long reg_size;
+};
+
+struct linux_prom_irqs {
+	int pri;    /* IRQ priority */
+	int vector; /* This is foobar, what does it do? */
+};
+
+/* Element of the "ranges" vector */
+struct linux_prom_ranges {
+	unsigned int ot_child_space;
+	unsigned int ot_child_base;		/* Bus feels this */
+	unsigned int ot_parent_space;
+	unsigned int ot_parent_base;		/* CPU looks from here */
+	unsigned int or_size;
+};
+
+struct linux_prom64_ranges {
+	unsigned long ot_child_base;		/* Bus feels this */
+	unsigned long ot_parent_base;		/* CPU looks from here */
+	unsigned long or_size;
+};
+
+/* Ranges and reg properties are a bit different for PCI. */
+struct linux_prom_pci_registers {
+	unsigned int phys_hi;
+	unsigned int phys_mid;
+	unsigned int phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_pci_ranges {
+	unsigned int child_phys_hi;	/* Only certain bits are encoded here. */
+	unsigned int child_phys_mid;
+	unsigned int child_phys_lo;
+
+	unsigned int parent_phys_hi;
+	unsigned int parent_phys_lo;
+
+	unsigned int size_hi;
+	unsigned int size_lo;
+};
+
+struct linux_prom_pci_intmap {
+	unsigned int phys_hi;
+	unsigned int phys_mid;
+	unsigned int phys_lo;
+
+	unsigned int interrupt;
+
+	int          cnode;
+	unsigned int cinterrupt;
+};
+
+struct linux_prom_pci_intmask {
+	unsigned int phys_hi;
+	unsigned int phys_mid;
+	unsigned int phys_lo;
+	unsigned int interrupt;
+};
+
+struct linux_prom_ebus_ranges {
+	unsigned int child_phys_hi;
+	unsigned int child_phys_lo;
+
+	unsigned int parent_phys_hi;
+	unsigned int parent_phys_mid;
+	unsigned int parent_phys_lo;
+
+	unsigned int size;
+};
+
+struct linux_prom_ebus_intmap {
+	unsigned int phys_hi;
+	unsigned int phys_lo;
+
+	unsigned int interrupt;
+
+	int          cnode;
+	unsigned int cinterrupt;
+};
+
+struct linux_prom_ebus_intmask {
+	unsigned int phys_hi;
+	unsigned int phys_lo;
+	unsigned int interrupt;
+};
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_OPENPROM_H) */
diff --git a/arch/sparc/include/asm/openpromio.h b/arch/sparc/include/asm/openpromio.h
new file mode 100644
index 000000000000..917fb8e9c633
--- /dev/null
+++ b/arch/sparc/include/asm/openpromio.h
@@ -0,0 +1,69 @@
+#ifndef	_SPARC_OPENPROMIO_H
+#define	_SPARC_OPENPROMIO_H
+
+#include <linux/compiler.h>
+#include <linux/ioctl.h>
+#include <linux/types.h>
+
+/*
+ * SunOS and Solaris /dev/openprom definitions. The ioctl values
+ * were chosen to be exactly equal to the SunOS equivalents.
+ */
+
+struct openpromio
+{
+	u_int	oprom_size;		/* Actual size of the oprom_array. */
+	char	oprom_array[1];		/* Holds property names and values. */
+};
+
+#define	OPROMMAXPARAM	4096		/* Maximum size of oprom_array. */
+
+#define	OPROMGETOPT		0x20004F01
+#define	OPROMSETOPT		0x20004F02
+#define	OPROMNXTOPT		0x20004F03
+#define	OPROMSETOPT2		0x20004F04
+#define	OPROMNEXT		0x20004F05
+#define	OPROMCHILD		0x20004F06
+#define	OPROMGETPROP		0x20004F07
+#define	OPROMNXTPROP		0x20004F08
+#define	OPROMU2P		0x20004F09
+#define	OPROMGETCONS		0x20004F0A
+#define	OPROMGETFBNAME		0x20004F0B
+#define	OPROMGETBOOTARGS	0x20004F0C
+/* Linux extensions */				/* Arguments in oprom_array: */
+#define OPROMSETCUR		0x20004FF0	/* int node - Sets current node */
+#define OPROMPCI2NODE		0x20004FF1	/* int pci_bus, pci_devfn - Sets current node to PCI device's node */
+#define OPROMPATH2NODE		0x20004FF2	/* char path[] - Set current node from fully qualified PROM path */
+
+/*
+ * Return values from OPROMGETCONS:
+ */
+
+#define OPROMCONS_NOT_WSCONS    0
+#define OPROMCONS_STDIN_IS_KBD  0x1     /* stdin device is kbd */
+#define OPROMCONS_STDOUT_IS_FB  0x2     /* stdout is a framebuffer */
+#define OPROMCONS_OPENPROM      0x4     /* supports openboot */
+
+
+/*
+ *  NetBSD/OpenBSD /dev/openprom definitions.
+ */
+
+struct opiocdesc
+{
+	int	op_nodeid;		/* PROM Node ID (value-result) */
+	int	op_namelen;		/* Length of op_name. */
+	char	__user *op_name;	/* Pointer to the property name. */
+	int	op_buflen;		/* Length of op_buf (value-result) */
+	char	__user *op_buf;		/* Pointer to buffer. */
+};
+
+#define	OPIOCGET	_IOWR('O', 1, struct opiocdesc)
+#define	OPIOCSET	_IOW('O', 2, struct opiocdesc)
+#define	OPIOCNEXTPROP	_IOWR('O', 3, struct opiocdesc)
+#define	OPIOCGETOPTNODE	_IOR('O', 4, int)
+#define	OPIOCGETNEXT	_IOWR('O', 5, int)
+#define	OPIOCGETCHILD	_IOWR('O', 6, int)
+
+#endif /* _SPARC_OPENPROMIO_H */
+
diff --git a/arch/sparc/include/asm/oplib.h b/arch/sparc/include/asm/oplib.h
new file mode 100644
index 000000000000..72e04e13a6b4
--- /dev/null
+++ b/arch/sparc/include/asm/oplib.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_OPLIB_H
+#define ___ASM_SPARC_OPLIB_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/oplib_64.h>
+#else
+#include <asm/oplib_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h
new file mode 100644
index 000000000000..b2631da259e0
--- /dev/null
+++ b/arch/sparc/include/asm/oplib_32.h
@@ -0,0 +1,272 @@
+/*
+ * oplib.h:  Describes the interface and available routines in the
+ *           Linux Prom library.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_OPLIB_H
+#define __SPARC_OPLIB_H
+
+#include <asm/openprom.h>
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+
+/* The master romvec pointer... */
+extern struct linux_romvec *romvec;
+
+/* Enumeration to describe the prom major version we have detected. */
+enum prom_major_version {
+	PROM_V0,      /* Original sun4c V0 prom */
+	PROM_V2,      /* sun4c and early sun4m V2 prom */
+	PROM_V3,      /* sun4m and later, up to sun4d/sun4e machines V3 */
+	PROM_P1275,   /* IEEE compliant ISA based Sun PROM, only sun4u */
+	PROM_SUN4,    /* Old sun4 proms are totally different, but we'll shoehorn it to make it fit */
+};
+
+extern enum prom_major_version prom_vers;
+/* Revision, and firmware revision. */
+extern unsigned int prom_rev, prom_prev;
+
+/* Root node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_root_node;
+
+/* Pointer to prom structure containing the device tree traversal
+ * and usage utility functions.  Only prom-lib should use these,
+ * users use the interface defined by the library only!
+ */
+extern struct linux_nodeops *prom_nodeops;
+
+/* The functions... */
+
+/* You must call prom_init() before using any of the library services,
+ * preferably as early as possible.  Pass it the romvec pointer.
+ */
+extern void prom_init(struct linux_romvec *rom_ptr);
+
+/* Boot argument acquisition, returns the boot command line string. */
+extern char *prom_getbootargs(void);
+
+/* Device utilities. */
+
+/* Map and unmap devices in IO space at virtual addresses. Note that the
+ * virtual address you pass is a request and the prom may put your mappings
+ * somewhere else, so check your return value as that is where your new
+ * mappings really are!
+ *
+ * Another note, these are only available on V2 or higher proms!
+ */
+extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
+extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);
+
+/* Device operations. */
+
+/* Open the device described by the passed string.  Note, that the format
+ * of the string is different on V0 vs. V2->higher proms.  The caller must
+ * know what he/she is doing!  Returns the device descriptor, an int.
+ */
+extern int prom_devopen(char *device_string);
+
+/* Close a previously opened device described by the passed integer
+ * descriptor.
+ */
+extern int prom_devclose(int device_handle);
+
+/* Do a seek operation on the device described by the passed integer
+ * descriptor.
+ */
+extern void prom_seek(int device_handle, unsigned int seek_hival,
+		      unsigned int seek_lowval);
+
+/* Miscellaneous routines, don't really fit in any category per se. */
+
+/* Reboot the machine with the command line passed. */
+extern void prom_reboot(char *boot_command);
+
+/* Evaluate the forth string passed. */
+extern void prom_feval(char *forth_string);
+
+/* Enter the prom, with possibility of continuation with the 'go'
+ * command in newer proms.
+ */
+extern void prom_cmdline(void);
+
+/* Enter the prom, with no chance of continuation for the stand-alone
+ * which calls this.
+ */
+extern void prom_halt(void) __attribute__ ((noreturn));
+
+/* Set the PROM 'sync' callback function to the passed function pointer.
+ * When the user gives the 'sync' command at the prom prompt while the
+ * kernel is still active, the prom will call this routine.
+ *
+ * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX
+ */
+typedef void (*sync_func_t)(void);
+extern void prom_setsync(sync_func_t func_ptr);
+
+/* Acquire the IDPROM of the root node in the prom device tree.  This
+ * gets passed a buffer where you would like it stuffed.  The return value
+ * is the format type of this idprom or 0xff on error.
+ */
+extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
+
+/* Get the prom major version. */
+extern int prom_version(void);
+
+/* Get the prom plugin revision. */
+extern int prom_getrev(void);
+
+/* Get the prom firmware revision. */
+extern int prom_getprev(void);
+
+/* Character operations to/from the console.... */
+
+/* Non-blocking get character from console. */
+extern int prom_nbgetchar(void);
+
+/* Non-blocking put character to console. */
+extern int prom_nbputchar(char character);
+
+/* Blocking get character from console. */
+extern char prom_getchar(void);
+
+/* Blocking put character to console. */
+extern void prom_putchar(char character);
+
+/* Prom's internal routines, don't use in kernel/boot code. */
+extern void prom_printf(char *fmt, ...);
+extern void prom_write(const char *buf, unsigned int len);
+
+/* Multiprocessor operations... */
+
+/* Start the CPU with the given device tree node, context table, and context
+ * at the passed program counter.
+ */
+extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table,
+			 int context, char *program_counter);
+
+/* Stop the CPU with the passed device tree node. */
+extern int prom_stopcpu(int cpunode);
+
+/* Idle the CPU with the passed device tree node. */
+extern int prom_idlecpu(int cpunode);
+
+/* Re-Start the CPU with the passed device tree node. */
+extern int prom_restartcpu(int cpunode);
+
+/* PROM memory allocation facilities... */
+
+/* Allocated at possibly the given virtual address a chunk of the
+ * indicated size.
+ */
+extern char *prom_alloc(char *virt_hint, unsigned int size);
+
+/* Free a previously allocated chunk. */
+extern void prom_free(char *virt_addr, unsigned int size);
+
+/* Sun4/sun4c specific memory-management startup hook. */
+
+/* Map the passed segment in the given context at the passed
+ * virtual address.
+ */
+extern void prom_putsegment(int context, unsigned long virt_addr,
+			    int physical_segment);
+
+
+/* PROM device tree traversal functions... */
+
+#ifdef PROMLIB_INTERNAL
+
+/* Internal version of prom_getchild. */
+extern int __prom_getchild(int parent_node);
+
+/* Internal version of prom_getsibling. */
+extern int __prom_getsibling(int node);
+
+#endif
+
+
+/* Get the child node of the given node, or zero if no child exists. */
+extern int prom_getchild(int parent_node);
+
+/* Get the next sibling node of the given node, or zero if no further
+ * siblings exist.
+ */
+extern int prom_getsibling(int node);
+
+/* Get the length, at the passed node, of the given property type.
+ * Returns -1 on error (ie. no such property at this node).
+ */
+extern int prom_getproplen(int thisnode, char *property);
+
+/* Fetch the requested property using the given buffer.  Returns
+ * the number of bytes the prom put into your buffer or -1 on error.
+ */
+extern int __must_check prom_getproperty(int thisnode, char *property,
+					 char *prop_buffer, int propbuf_size);
+
+/* Acquire an integer property. */
+extern int prom_getint(int node, char *property);
+
+/* Acquire an integer property, with a default value. */
+extern int prom_getintdefault(int node, char *property, int defval);
+
+/* Acquire a boolean property, 0=FALSE 1=TRUE. */
+extern int prom_getbool(int node, char *prop);
+
+/* Acquire a string property, null string on error. */
+extern void prom_getstring(int node, char *prop, char *buf, int bufsize);
+
+/* Does the passed node have the given "name"? YES=1 NO=0 */
+extern int prom_nodematch(int thisnode, char *name);
+
+/* Search all siblings starting at the passed node for "name" matching
+ * the given string.  Returns the node on success, zero on failure.
+ */
+extern int prom_searchsiblings(int node_start, char *name);
+
+/* Return the first property type, as a string, for the given node.
+ * Returns a null string on error.
+ */
+extern char *prom_firstprop(int node, char *buffer);
+
+/* Returns the next property after the passed property for the given
+ * node.  Returns null string on failure.
+ */
+extern char *prom_nextprop(int node, char *prev_property, char *buffer);
+
+/* Returns phandle of the path specified */
+extern int prom_finddevice(char *name);
+
+/* Returns 1 if the specified node has given property. */
+extern int prom_node_has_property(int node, char *property);
+
+/* Set the indicated property at the given node with the passed value.
+ * Returns the number of bytes of your value that the prom took.
+ */
+extern int prom_setprop(int node, char *prop_name, char *prop_value,
+			int value_size);
+
+extern int prom_pathtoinode(char *path);
+extern int prom_inst2pkg(int);
+
+/* Dorking with Bus ranges... */
+
+/* Apply promlib probes OBIO ranges to registers. */
+extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs);
+
+/* Apply ranges of any prom node (and optionally parent node as well) to registers. */
+extern void prom_apply_generic_ranges(int node, int parent,
+				      struct linux_prom_registers *sbusregs, int nregs);
+
+/* CPU probing helpers.  */
+int cpu_find_by_instance(int instance, int *prom_node, int *mid);
+int cpu_find_by_mid(int mid, int *prom_node);
+int cpu_get_hwmid(int prom_node);
+
+extern spinlock_t prom_lock;
+
+#endif /* !(__SPARC_OPLIB_H) */
diff --git a/arch/sparc/include/asm/oplib_64.h b/arch/sparc/include/asm/oplib_64.h
new file mode 100644
index 000000000000..6d2c2ca98039
--- /dev/null
+++ b/arch/sparc/include/asm/oplib_64.h
@@ -0,0 +1,322 @@
+/* oplib.h:  Describes the interface and available routines in the
+ *           Linux Prom library.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1996 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __SPARC64_OPLIB_H
+#define __SPARC64_OPLIB_H
+
+#include <asm/openprom.h>
+
+/* OBP version string. */
+extern char prom_version[];
+
+/* Root node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_root_node;
+
+/* PROM stdin and stdout */
+extern int prom_stdin, prom_stdout;
+
+/* /chosen node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_chosen_node;
+
+/* Helper values and strings in arch/sparc64/kernel/head.S */
+extern const char prom_peer_name[];
+extern const char prom_compatible_name[];
+extern const char prom_root_compatible[];
+extern const char prom_cpu_compatible[];
+extern const char prom_finddev_name[];
+extern const char prom_chosen_path[];
+extern const char prom_cpu_path[];
+extern const char prom_getprop_name[];
+extern const char prom_mmu_name[];
+extern const char prom_callmethod_name[];
+extern const char prom_translate_name[];
+extern const char prom_map_name[];
+extern const char prom_unmap_name[];
+extern int prom_mmu_ihandle_cache;
+extern unsigned int prom_boot_mapped_pc;
+extern unsigned int prom_boot_mapping_mode;
+extern unsigned long prom_boot_mapping_phys_high, prom_boot_mapping_phys_low;
+
+struct linux_mlist_p1275 {
+	struct linux_mlist_p1275 *theres_more;
+	unsigned long start_adr;
+	unsigned long num_bytes;
+};
+
+struct linux_mem_p1275 {
+	struct linux_mlist_p1275 **p1275_totphys;
+	struct linux_mlist_p1275 **p1275_prommap;
+	struct linux_mlist_p1275 **p1275_available; /* What we can use */
+};
+
+/* The functions... */
+
+/* You must call prom_init() before using any of the library services,
+ * preferably as early as possible.  Pass it the romvec pointer.
+ */
+extern void prom_init(void *cif_handler, void *cif_stack);
+
+/* Boot argument acquisition, returns the boot command line string. */
+extern char *prom_getbootargs(void);
+
+/* Device utilities. */
+
+/* Device operations. */
+
+/* Open the device described by the passed string.  Note, that the format
+ * of the string is different on V0 vs. V2->higher proms.  The caller must
+ * know what he/she is doing!  Returns the device descriptor, an int.
+ */
+extern int prom_devopen(const char *device_string);
+
+/* Close a previously opened device described by the passed integer
+ * descriptor.
+ */
+extern int prom_devclose(int device_handle);
+
+/* Do a seek operation on the device described by the passed integer
+ * descriptor.
+ */
+extern void prom_seek(int device_handle, unsigned int seek_hival,
+		      unsigned int seek_lowval);
+
+/* Miscellaneous routines, don't really fit in any category per se. */
+
+/* Reboot the machine with the command line passed. */
+extern void prom_reboot(const char *boot_command);
+
+/* Evaluate the forth string passed. */
+extern void prom_feval(const char *forth_string);
+
+/* Enter the prom, with possibility of continuation with the 'go'
+ * command in newer proms.
+ */
+extern void prom_cmdline(void);
+
+/* Enter the prom, with no chance of continuation for the stand-alone
+ * which calls this.
+ */
+extern void prom_halt(void) __attribute__ ((noreturn));
+
+/* Halt and power-off the machine. */
+extern void prom_halt_power_off(void) __attribute__ ((noreturn));
+
+/* Set the PROM 'sync' callback function to the passed function pointer.
+ * When the user gives the 'sync' command at the prom prompt while the
+ * kernel is still active, the prom will call this routine.
+ *
+ */
+typedef int (*callback_func_t)(long *cmd);
+extern void prom_setcallback(callback_func_t func_ptr);
+
+/* Acquire the IDPROM of the root node in the prom device tree.  This
+ * gets passed a buffer where you would like it stuffed.  The return value
+ * is the format type of this idprom or 0xff on error.
+ */
+extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
+
+/* Character operations to/from the console.... */
+
+/* Non-blocking get character from console. */
+extern int prom_nbgetchar(void);
+
+/* Non-blocking put character to console. */
+extern int prom_nbputchar(char character);
+
+/* Blocking get character from console. */
+extern char prom_getchar(void);
+
+/* Blocking put character to console. */
+extern void prom_putchar(char character);
+
+/* Prom's internal routines, don't use in kernel/boot code. */
+extern void prom_printf(const char *fmt, ...);
+extern void prom_write(const char *buf, unsigned int len);
+
+/* Multiprocessor operations... */
+#ifdef CONFIG_SMP
+/* Start the CPU with the given device tree node at the passed program
+ * counter with the given arg passed in via register %o0.
+ */
+extern void prom_startcpu(int cpunode, unsigned long pc, unsigned long arg);
+
+/* Start the CPU with the given cpu ID at the passed program
+ * counter with the given arg passed in via register %o0.
+ */
+extern void prom_startcpu_cpuid(int cpuid, unsigned long pc, unsigned long arg);
+
+/* Stop the CPU with the given cpu ID.  */
+extern void prom_stopcpu_cpuid(int cpuid);
+
+/* Stop the current CPU. */
+extern void prom_stopself(void);
+
+/* Idle the current CPU. */
+extern void prom_idleself(void);
+
+/* Resume the CPU with the passed device tree node. */
+extern void prom_resumecpu(int cpunode);
+#endif
+
+/* Power management interfaces. */
+
+/* Put the current CPU to sleep. */
+extern void prom_sleepself(void);
+
+/* Put the entire system to sleep. */
+extern int prom_sleepsystem(void);
+
+/* Initiate a wakeup event. */
+extern int prom_wakeupsystem(void);
+
+/* MMU and memory related OBP interfaces. */
+
+/* Get unique string identifying SIMM at given physical address. */
+extern int prom_getunumber(int syndrome_code,
+			   unsigned long phys_addr,
+			   char *buf, int buflen);
+
+/* Retain physical memory to the caller across soft resets. */
+extern unsigned long prom_retain(const char *name,
+				 unsigned long pa_low, unsigned long pa_high,
+				 long size, long align);
+
+/* Load explicit I/D TLB entries into the calling processor. */
+extern long prom_itlb_load(unsigned long index,
+			   unsigned long tte_data,
+			   unsigned long vaddr);
+
+extern long prom_dtlb_load(unsigned long index,
+			   unsigned long tte_data,
+			   unsigned long vaddr);
+
+/* Map/Unmap client program address ranges.  First the format of
+ * the mapping mode argument.
+ */
+#define PROM_MAP_WRITE	0x0001 /* Writable */
+#define PROM_MAP_READ	0x0002 /* Readable - sw */
+#define PROM_MAP_EXEC	0x0004 /* Executable - sw */
+#define PROM_MAP_LOCKED	0x0010 /* Locked, use i/dtlb load calls for this instead */
+#define PROM_MAP_CACHED	0x0020 /* Cacheable in both L1 and L2 caches */
+#define PROM_MAP_SE	0x0040 /* Side-Effects */
+#define PROM_MAP_GLOB	0x0080 /* Global */
+#define PROM_MAP_IE	0x0100 /* Invert-Endianness */
+#define PROM_MAP_DEFAULT (PROM_MAP_WRITE | PROM_MAP_READ | PROM_MAP_EXEC | PROM_MAP_CACHED)
+
+extern int prom_map(int mode, unsigned long size,
+		    unsigned long vaddr, unsigned long paddr);
+extern void prom_unmap(unsigned long size, unsigned long vaddr);
+
+
+/* PROM device tree traversal functions... */
+
+#ifdef PROMLIB_INTERNAL
+
+/* Internal version of prom_getchild. */
+extern int __prom_getchild(int parent_node);
+
+/* Internal version of prom_getsibling. */
+extern int __prom_getsibling(int node);
+
+#endif
+
+/* Get the child node of the given node, or zero if no child exists. */
+extern int prom_getchild(int parent_node);
+
+/* Get the next sibling node of the given node, or zero if no further
+ * siblings exist.
+ */
+extern int prom_getsibling(int node);
+
+/* Get the length, at the passed node, of the given property type.
+ * Returns -1 on error (ie. no such property at this node).
+ */
+extern int prom_getproplen(int thisnode, const char *property);
+
+/* Fetch the requested property using the given buffer.  Returns
+ * the number of bytes the prom put into your buffer or -1 on error.
+ */
+extern int prom_getproperty(int thisnode, const char *property,
+			    char *prop_buffer, int propbuf_size);
+
+/* Acquire an integer property. */
+extern int prom_getint(int node, const char *property);
+
+/* Acquire an integer property, with a default value. */
+extern int prom_getintdefault(int node, const char *property, int defval);
+
+/* Acquire a boolean property, 0=FALSE 1=TRUE. */
+extern int prom_getbool(int node, const char *prop);
+
+/* Acquire a string property, null string on error. */
+extern void prom_getstring(int node, const char *prop, char *buf, int bufsize);
+
+/* Does the passed node have the given "name"? YES=1 NO=0 */
+extern int prom_nodematch(int thisnode, const char *name);
+
+/* Search all siblings starting at the passed node for "name" matching
+ * the given string.  Returns the node on success, zero on failure.
+ */
+extern int prom_searchsiblings(int node_start, const char *name);
+
+/* Return the first property type, as a string, for the given node.
+ * Returns a null string on error. Buffer should be at least 32B long.
+ */
+extern char *prom_firstprop(int node, char *buffer);
+
+/* Returns the next property after the passed property for the given
+ * node.  Returns null string on failure. Buffer should be at least 32B long.
+ */
+extern char *prom_nextprop(int node, const char *prev_property, char *buffer);
+
+/* Returns 1 if the specified node has given property. */
+extern int prom_node_has_property(int node, const char *property);
+
+/* Returns phandle of the path specified */
+extern int prom_finddevice(const char *name);
+
+/* Set the indicated property at the given node with the passed value.
+ * Returns the number of bytes of your value that the prom took.
+ */
+extern int prom_setprop(int node, const char *prop_name, char *prop_value,
+			int value_size);
+
+extern int prom_pathtoinode(const char *path);
+extern int prom_inst2pkg(int);
+extern int prom_service_exists(const char *service_name);
+extern void prom_sun4v_guest_soft_state(void);
+
+extern int prom_ihandle2path(int handle, char *buffer, int bufsize);
+
+/* Client interface level routines. */
+extern long p1275_cmd(const char *, long, ...);
+
+#if 0
+#define P1275_SIZE(x) ((((long)((x) / 32)) << 32) | (x))
+#else
+#define P1275_SIZE(x) x
+#endif
+
+/* We support at most 16 input and 1 output argument */
+#define P1275_ARG_NUMBER		0
+#define P1275_ARG_IN_STRING		1
+#define P1275_ARG_OUT_BUF		2
+#define P1275_ARG_OUT_32B		3
+#define P1275_ARG_IN_FUNCTION		4
+#define P1275_ARG_IN_BUF		5
+#define P1275_ARG_IN_64B		6
+
+#define P1275_IN(x) ((x) & 0xf)
+#define P1275_OUT(x) (((x) << 4) & 0xf0)
+#define P1275_INOUT(i,o) (P1275_IN(i)|P1275_OUT(o))
+#define P1275_ARG(n,x) ((x) << ((n)*3 + 8))
+
+#endif /* !(__SPARC64_OPLIB_H) */
diff --git a/arch/sparc/include/asm/page.h b/arch/sparc/include/asm/page.h
new file mode 100644
index 000000000000..f21de0349025
--- /dev/null
+++ b/arch/sparc/include/asm/page.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PAGE_H
+#define ___ASM_SPARC_PAGE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/page_64.h>
+#else
+#include <asm/page_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/page_32.h b/arch/sparc/include/asm/page_32.h
new file mode 100644
index 000000000000..cf5fb70ca1c1
--- /dev/null
+++ b/arch/sparc/include/asm/page_32.h
@@ -0,0 +1,160 @@
+/*
+ * page.h:  Various defines and such for MMU operations on the Sparc for
+ *          the Linux kernel.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_PAGE_H
+#define _SPARC_PAGE_H
+
+#ifdef CONFIG_SUN4
+#define PAGE_SHIFT   13
+#else
+#define PAGE_SHIFT   12
+#endif
+#ifndef __ASSEMBLY__
+/* I have my suspicions... -DaveM */
+#define PAGE_SIZE    (1UL << PAGE_SHIFT)
+#else
+#define PAGE_SIZE    (1 << PAGE_SHIFT)
+#endif
+#define PAGE_MASK    (~(PAGE_SIZE-1))
+
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+#define clear_page(page)	 memset((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to,from) 	memcpy((void *)(to), (void *)(from), PAGE_SIZE)
+#define clear_user_page(addr, vaddr, page)	\
+	do { 	clear_page(addr);		\
+		sparc_flush_page_to_ram(page);	\
+	} while (0)
+#define copy_user_page(to, from, vaddr, page)	\
+	do {	copy_page(to, from);		\
+		sparc_flush_page_to_ram(page);	\
+	} while (0)
+
+/* The following structure is used to hold the physical
+ * memory configuration of the machine.  This is filled in
+ * prom_meminit() and is later used by mem_init() to set up
+ * mem_map[].  We statically allocate SPARC_PHYS_BANKS+1 of
+ * these structs, this is arbitrary.  The entry after the
+ * last valid one has num_bytes==0.
+ */
+struct sparc_phys_banks {
+  unsigned long base_addr;
+  unsigned long num_bytes;
+};
+
+#define SPARC_PHYS_BANKS 32
+
+extern struct sparc_phys_banks sp_banks[SPARC_PHYS_BANKS+1];
+
+/* Cache alias structure.  Entry is valid if context != -1. */
+struct cache_palias {
+	unsigned long vaddr;
+	int context;
+};
+
+/* passing structs on the Sparc slow us down tremendously... */
+
+/* #define STRICT_MM_TYPECHECKS */
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long iopte; } iopte_t;
+typedef struct { unsigned long pmdv[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long ctxd; } ctxd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct { unsigned long iopgprot; } iopgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define iopte_val(x)	((x).iopte)
+#define pmd_val(x)      ((x).pmdv[0])
+#define pgd_val(x)	((x).pgd)
+#define ctxd_val(x)	((x).ctxd)
+#define pgprot_val(x)	((x).pgprot)
+#define iopgprot_val(x)	((x).iopgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __iopte(x)	((iopte_t) { (x) } )
+/* #define __pmd(x)        ((pmd_t) { (x) } ) */ /* XXX procedure with loop */
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __ctxd(x)	((ctxd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+#define __iopgprot(x)	((iopgprot_t) { (x) } )
+
+#else
+/*
+ * .. while these make it easier on the compiler
+ */
+typedef unsigned long pte_t;
+typedef unsigned long iopte_t;
+typedef struct { unsigned long pmdv[16]; } pmd_t;
+typedef unsigned long pgd_t;
+typedef unsigned long ctxd_t;
+typedef unsigned long pgprot_t;
+typedef unsigned long iopgprot_t;
+
+#define pte_val(x)	(x)
+#define iopte_val(x)	(x)
+#define pmd_val(x)      ((x).pmdv[0])
+#define pgd_val(x)	(x)
+#define ctxd_val(x)	(x)
+#define pgprot_val(x)	(x)
+#define iopgprot_val(x)	(x)
+
+#define __pte(x)	(x)
+#define __iopte(x)	(x)
+/* #define __pmd(x)        (x) */ /* XXX later */
+#define __pgd(x)	(x)
+#define __ctxd(x)	(x)
+#define __pgprot(x)	(x)
+#define __iopgprot(x)	(x)
+
+#endif
+
+typedef struct page *pgtable_t;
+
+extern unsigned long sparc_unmapped_base;
+
+BTFIXUPDEF_SETHI(sparc_unmapped_base)
+
+#define TASK_UNMAPPED_BASE	BTFIXUP_SETHI(sparc_unmapped_base)
+
+#else /* !(__ASSEMBLY__) */
+
+#define __pgprot(x)	(x)
+
+#endif /* !(__ASSEMBLY__) */
+
+#define PAGE_OFFSET	0xf0000000
+#ifndef __ASSEMBLY__
+extern unsigned long phys_base;
+extern unsigned long pfn_base;
+#endif
+#define __pa(x)			((unsigned long)(x) - PAGE_OFFSET + phys_base)
+#define __va(x)			((void *)((unsigned long) (x) - phys_base + PAGE_OFFSET))
+
+#define virt_to_phys		__pa
+#define phys_to_virt		__va
+
+#define ARCH_PFN_OFFSET		(pfn_base)
+#define virt_to_page(kaddr)	(mem_map + ((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT)))
+
+#define pfn_valid(pfn)		(((pfn) >= (pfn_base)) && (((pfn)-(pfn_base)) < max_mapnr))
+#define virt_addr_valid(kaddr)	((((unsigned long)(kaddr)-PAGE_OFFSET)>>PAGE_SHIFT) < max_mapnr)
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/memory_model.h>
+#include <asm-generic/page.h>
+
+#endif /* _SPARC_PAGE_H */
diff --git a/arch/sparc/include/asm/page_64.h b/arch/sparc/include/asm/page_64.h
new file mode 100644
index 000000000000..b579b910ef51
--- /dev/null
+++ b/arch/sparc/include/asm/page_64.h
@@ -0,0 +1,135 @@
+#ifndef _SPARC64_PAGE_H
+#define _SPARC64_PAGE_H
+
+#include <linux/const.h>
+
+#if defined(CONFIG_SPARC64_PAGE_SIZE_8KB)
+#define PAGE_SHIFT   13
+#elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB)
+#define PAGE_SHIFT   16
+#else
+#error No page size specified in kernel configuration
+#endif
+
+#define PAGE_SIZE    (_AC(1,UL) << PAGE_SHIFT)
+#define PAGE_MASK    (~(PAGE_SIZE-1))
+
+/* Flushing for D-cache alias handling is only needed if
+ * the page size is smaller than 16K.
+ */
+#if PAGE_SHIFT < 14
+#define DCACHE_ALIASING_POSSIBLE
+#endif
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define HPAGE_SHIFT		22
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
+#define HPAGE_SHIFT		19
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define HPAGE_SHIFT		16
+#endif
+
+#ifdef CONFIG_HUGETLB_PAGE
+#define HPAGE_SIZE		(_AC(1,UL) << HPAGE_SHIFT)
+#define HPAGE_MASK		(~(HPAGE_SIZE - 1UL))
+#define HUGETLB_PAGE_ORDER	(HPAGE_SHIFT - PAGE_SHIFT)
+#define HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+#endif
+
+#ifndef __ASSEMBLY__
+
+extern void _clear_page(void *page);
+#define clear_page(X)	_clear_page((void *)(X))
+struct page;
+extern void clear_user_page(void *addr, unsigned long vaddr, struct page *page);
+#define copy_page(X,Y)	memcpy((void *)(X), (void *)(Y), PAGE_SIZE)
+extern void copy_user_page(void *to, void *from, unsigned long vaddr, struct page *topage);
+
+/* Unlike sparc32, sparc64's parameter passing API is more
+ * sane in that structures which as small enough are passed
+ * in registers instead of on the stack.  Thus, setting
+ * STRICT_MM_TYPECHECKS does not generate worse code so
+ * let's enable it to get the type checking.
+ */
+
+#define STRICT_MM_TYPECHECKS
+
+#ifdef STRICT_MM_TYPECHECKS
+/* These are used to make use of C type-checking.. */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long iopte; } iopte_t;
+typedef struct { unsigned int pmd; } pmd_t;
+typedef struct { unsigned int pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)	((x).pte)
+#define iopte_val(x)	((x).iopte)
+#define pmd_val(x)      ((x).pmd)
+#define pgd_val(x)	((x).pgd)
+#define pgprot_val(x)	((x).pgprot)
+
+#define __pte(x)	((pte_t) { (x) } )
+#define __iopte(x)	((iopte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgd(x)	((pgd_t) { (x) } )
+#define __pgprot(x)	((pgprot_t) { (x) } )
+
+#else
+/* .. while these make it easier on the compiler */
+typedef unsigned long pte_t;
+typedef unsigned long iopte_t;
+typedef unsigned int pmd_t;
+typedef unsigned int pgd_t;
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)	(x)
+#define iopte_val(x)	(x)
+#define pmd_val(x)      (x)
+#define pgd_val(x)	(x)
+#define pgprot_val(x)	(x)
+
+#define __pte(x)	(x)
+#define __iopte(x)	(x)
+#define __pmd(x)        (x)
+#define __pgd(x)	(x)
+#define __pgprot(x)	(x)
+
+#endif /* (STRICT_MM_TYPECHECKS) */
+
+typedef struct page *pgtable_t;
+
+#define TASK_UNMAPPED_BASE	(test_thread_flag(TIF_32BIT) ? \
+				 (_AC(0x0000000070000000,UL)) : \
+				 (_AC(0xfffff80000000000,UL) + (1UL << 32UL)))
+
+#include <asm-generic/memory_model.h>
+
+#endif /* !(__ASSEMBLY__) */
+
+/* We used to stick this into a hard-coded global register (%g4)
+ * but that does not make sense anymore.
+ */
+#define PAGE_OFFSET		_AC(0xFFFFF80000000000,UL)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(x)			((unsigned long)(x) - PAGE_OFFSET)
+#define __va(x)			((void *)((unsigned long) (x) + PAGE_OFFSET))
+
+#define pfn_to_kaddr(pfn)	__va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(kaddr)	pfn_to_page(__pa(kaddr)>>PAGE_SHIFT)
+
+#define virt_addr_valid(kaddr)	pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
+
+#define virt_to_phys __pa
+#define phys_to_virt __va
+
+#endif /* !(__ASSEMBLY__) */
+
+#define VM_DATA_DEFAULT_FLAGS	(VM_READ | VM_WRITE | VM_EXEC | \
+				 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/page.h>
+
+#endif /* _SPARC64_PAGE_H */
diff --git a/arch/sparc/include/asm/param.h b/arch/sparc/include/asm/param.h
new file mode 100644
index 000000000000..9836d9a3cb9a
--- /dev/null
+++ b/arch/sparc/include/asm/param.h
@@ -0,0 +1,22 @@
+#ifndef _ASMSPARC_PARAM_H
+#define _ASMSPARC_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ		CONFIG_HZ	/* Internal kernel timer frequency */
+# define USER_HZ	100	/* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC (USER_HZ)
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE	8192    /* Thanks for sun4's we carry baggage... */
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#endif
diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h
new file mode 100644
index 000000000000..7818b2523b8d
--- /dev/null
+++ b/arch/sparc/include/asm/parport.h
@@ -0,0 +1,246 @@
+/* parport.h: sparc64 specific parport initialization and dma.
+ *
+ * Copyright (C) 1999  Eddie C. Dost  (ecd@skynet.be)
+ */
+
+#ifndef _ASM_SPARC64_PARPORT_H
+#define _ASM_SPARC64_PARPORT_H 1
+
+#include <asm/ebus.h>
+#include <asm/ns87303.h>
+#include <asm/of_device.h>
+#include <asm/prom.h>
+
+#define PARPORT_PC_MAX_PORTS	PARPORT_MAX
+
+/*
+ * While sparc64 doesn't have an ISA DMA API, we provide something that looks
+ * close enough to make parport_pc happy
+ */
+#define HAS_DMA
+
+static DEFINE_SPINLOCK(dma_spin_lock);
+
+#define claim_dma_lock() \
+({	unsigned long flags; \
+	spin_lock_irqsave(&dma_spin_lock, flags); \
+	flags; \
+})
+
+#define release_dma_lock(__flags) \
+	spin_unlock_irqrestore(&dma_spin_lock, __flags);
+
+static struct sparc_ebus_info {
+	struct ebus_dma_info info;
+	unsigned int addr;
+	unsigned int count;
+	int lock;
+
+	struct parport *port;
+} sparc_ebus_dmas[PARPORT_PC_MAX_PORTS];
+
+static DECLARE_BITMAP(dma_slot_map, PARPORT_PC_MAX_PORTS);
+
+static inline int request_dma(unsigned int dmanr, const char *device_id)
+{
+	if (dmanr >= PARPORT_PC_MAX_PORTS)
+		return -EINVAL;
+	if (xchg(&sparc_ebus_dmas[dmanr].lock, 1) != 0)
+		return -EBUSY;
+	return 0;
+}
+
+static inline void free_dma(unsigned int dmanr)
+{
+	if (dmanr >= PARPORT_PC_MAX_PORTS) {
+		printk(KERN_WARNING "Trying to free DMA%d\n", dmanr);
+		return;
+	}
+	if (xchg(&sparc_ebus_dmas[dmanr].lock, 0) == 0) {
+		printk(KERN_WARNING "Trying to free free DMA%d\n", dmanr);
+		return;
+	}
+}
+
+static inline void enable_dma(unsigned int dmanr)
+{
+	ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 1);
+
+	if (ebus_dma_request(&sparc_ebus_dmas[dmanr].info,
+			     sparc_ebus_dmas[dmanr].addr,
+			     sparc_ebus_dmas[dmanr].count))
+		BUG();
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+	ebus_dma_enable(&sparc_ebus_dmas[dmanr].info, 0);
+}
+
+static inline void clear_dma_ff(unsigned int dmanr)
+{
+	/* nothing */
+}
+
+static inline void set_dma_mode(unsigned int dmanr, char mode)
+{
+	ebus_dma_prepare(&sparc_ebus_dmas[dmanr].info, (mode != DMA_MODE_WRITE));
+}
+
+static inline void set_dma_addr(unsigned int dmanr, unsigned int addr)
+{
+	sparc_ebus_dmas[dmanr].addr = addr;
+}
+
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+	sparc_ebus_dmas[dmanr].count = count;
+}
+
+static inline unsigned int get_dma_residue(unsigned int dmanr)
+{
+	return ebus_dma_residue(&sparc_ebus_dmas[dmanr].info);
+}
+
+static int __devinit ecpp_probe(struct of_device *op, const struct of_device_id *match)
+{
+	unsigned long base = op->resource[0].start;
+	unsigned long config = op->resource[1].start;
+	unsigned long d_base = op->resource[2].start;
+	unsigned long d_len;
+	struct device_node *parent;
+	struct parport *p;
+	int slot, err;
+
+	parent = op->node->parent;
+	if (!strcmp(parent->name, "dma")) {
+		p = parport_pc_probe_port(base, base + 0x400,
+					  op->irqs[0], PARPORT_DMA_NOFIFO,
+					  op->dev.parent->parent);
+		if (!p)
+			return -ENOMEM;
+		dev_set_drvdata(&op->dev, p);
+		return 0;
+	}
+
+	for (slot = 0; slot < PARPORT_PC_MAX_PORTS; slot++) {
+		if (!test_and_set_bit(slot, dma_slot_map))
+			break;
+	}
+	err = -ENODEV;
+	if (slot >= PARPORT_PC_MAX_PORTS)
+		goto out_err;
+
+	spin_lock_init(&sparc_ebus_dmas[slot].info.lock);
+
+	d_len = (op->resource[2].end - d_base) + 1UL;
+	sparc_ebus_dmas[slot].info.regs =
+		of_ioremap(&op->resource[2], 0, d_len, "ECPP DMA");
+
+	if (!sparc_ebus_dmas[slot].info.regs)
+		goto out_clear_map;
+
+	sparc_ebus_dmas[slot].info.flags = 0;
+	sparc_ebus_dmas[slot].info.callback = NULL;
+	sparc_ebus_dmas[slot].info.client_cookie = NULL;
+	sparc_ebus_dmas[slot].info.irq = 0xdeadbeef;
+	strcpy(sparc_ebus_dmas[slot].info.name, "parport");
+	if (ebus_dma_register(&sparc_ebus_dmas[slot].info))
+		goto out_unmap_regs;
+
+	ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 1);
+
+	/* Configure IRQ to Push Pull, Level Low */
+	/* Enable ECP, set bit 2 of the CTR first */
+	outb(0x04, base + 0x02);
+	ns87303_modify(config, PCR,
+		       PCR_EPP_ENABLE |
+		       PCR_IRQ_ODRAIN,
+		       PCR_ECP_ENABLE |
+		       PCR_ECP_CLK_ENA |
+		       PCR_IRQ_POLAR);
+
+	/* CTR bit 5 controls direction of port */
+	ns87303_modify(config, PTR,
+		       0, PTR_LPT_REG_DIR);
+
+	p = parport_pc_probe_port(base, base + 0x400,
+				  op->irqs[0],
+				  slot,
+				  op->dev.parent);
+	err = -ENOMEM;
+	if (!p)
+		goto out_disable_irq;
+
+	dev_set_drvdata(&op->dev, p);
+
+	return 0;
+
+out_disable_irq:
+	ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0);
+	ebus_dma_unregister(&sparc_ebus_dmas[slot].info);
+
+out_unmap_regs:
+	of_iounmap(&op->resource[2], sparc_ebus_dmas[slot].info.regs, d_len);
+
+out_clear_map:
+	clear_bit(slot, dma_slot_map);
+
+out_err:
+	return err;
+}
+
+static int __devexit ecpp_remove(struct of_device *op)
+{
+	struct parport *p = dev_get_drvdata(&op->dev);
+	int slot = p->dma;
+
+	parport_pc_unregister_port(p);
+
+	if (slot != PARPORT_DMA_NOFIFO) {
+		unsigned long d_base = op->resource[2].start;
+		unsigned long d_len;
+
+		d_len = (op->resource[2].end - d_base) + 1UL;
+
+		ebus_dma_irq_enable(&sparc_ebus_dmas[slot].info, 0);
+		ebus_dma_unregister(&sparc_ebus_dmas[slot].info);
+		of_iounmap(&op->resource[2],
+			   sparc_ebus_dmas[slot].info.regs,
+			   d_len);
+		clear_bit(slot, dma_slot_map);
+	}
+
+	return 0;
+}
+
+static struct of_device_id ecpp_match[] = {
+	{
+		.name = "ecpp",
+	},
+	{
+		.name = "parallel",
+		.compatible = "ecpp",
+	},
+	{
+		.name = "parallel",
+		.compatible = "ns87317-ecpp",
+	},
+	{},
+};
+
+static struct of_platform_driver ecpp_driver = {
+	.name			= "ecpp",
+	.match_table		= ecpp_match,
+	.probe			= ecpp_probe,
+	.remove			= __devexit_p(ecpp_remove),
+};
+
+static int parport_pc_find_nonpci_ports(int autoirq, int autodma)
+{
+	of_register_driver(&ecpp_driver, &of_bus_type);
+
+	return 0;
+}
+
+#endif /* !(_ASM_SPARC64_PARPORT_H */
diff --git a/arch/sparc/include/asm/pbm.h b/arch/sparc/include/asm/pbm.h
new file mode 100644
index 000000000000..458a4916d14d
--- /dev/null
+++ b/arch/sparc/include/asm/pbm.h
@@ -0,0 +1,47 @@
+/*
+ *
+ * pbm.h: PCI bus module pseudo driver software state
+ *        Adopted from sparc64 by V. Roganov and G. Raiko
+ *
+ * Original header:
+ * pbm.h: U2P PCI bus module pseudo driver software state.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * To put things into perspective, consider sparc64 with a few PCI controllers.
+ * Each type would have an own structure, with instances related one to one.
+ * We have only pcic on sparc, but we want to be compatible with sparc64 pbm.h.
+ * All three represent different abstractions.
+ *   pci_bus  - Linux PCI subsystem view of a PCI bus (including bridged buses)
+ *   pbm      - Arch-specific view of a PCI bus (sparc or sparc64)
+ *   pcic     - Chip-specific information for PCIC.
+ */
+
+#ifndef __SPARC_PBM_H
+#define __SPARC_PBM_H
+
+#include <linux/pci.h>
+#include <asm/oplib.h>
+#include <asm/prom.h>
+
+struct linux_pbm_info {
+	int		prom_node;
+	char		prom_name[64];
+	/* struct linux_prom_pci_ranges	pbm_ranges[PROMREG_MAX]; */
+	/* int		num_pbm_ranges; */
+
+	/* Now things for the actual PCI bus probes. */
+	unsigned int	pci_first_busno;	/* Can it be nonzero? */
+	struct pci_bus	*pci_bus;		/* Was inline, MJ allocs now */
+};
+
+/* PCI devices which are not bridges have this placed in their pci_dev
+ * sysdata member.  This makes OBP aware PCI device drivers easier to
+ * code.
+ */
+struct pcidev_cookie {
+	struct linux_pbm_info		*pbm;
+	struct device_node		*prom_node;
+};
+
+#endif /* !(__SPARC_PBM_H) */
diff --git a/arch/sparc/include/asm/pci.h b/arch/sparc/include/asm/pci.h
new file mode 100644
index 000000000000..6e14fd179335
--- /dev/null
+++ b/arch/sparc/include/asm/pci.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PCI_H
+#define ___ASM_SPARC_PCI_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pci_64.h>
+#else
+#include <asm/pci_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h
new file mode 100644
index 000000000000..0ee949d220c0
--- /dev/null
+++ b/arch/sparc/include/asm/pci_32.h
@@ -0,0 +1,171 @@
+#ifndef __SPARC_PCI_H
+#define __SPARC_PCI_H
+
+#ifdef __KERNEL__
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes
+ * or architectures with incomplete PCI setup by the loader.
+ */
+#define pcibios_assign_all_busses()	0
+#define pcibios_scan_all_fns(a, b)	0
+
+#define PCIBIOS_MIN_IO		0UL
+#define PCIBIOS_MIN_MEM		0UL
+
+#define PCI_IRQ_NONE		0xffffffff
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* Dynamic DMA mapping stuff.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(0)
+
+#include <asm/scatterlist.h>
+
+struct pci_dev;
+
+/* Allocate and map kernel buffer using consistent mode DMA for a device.
+ * hwdev should be valid struct pci_dev pointer for PCI devices.
+ */
+extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle);
+
+/* Free and unmap a consistent DMA buffer.
+ * cpu_addr is what was returned from pci_alloc_consistent,
+ * size must be the same as what as passed into pci_alloc_consistent,
+ * and likewise dma_addr must be the same as what *dma_addrp was set to.
+ *
+ * References to the memory and mappings assosciated with cpu_addr/dma_addr
+ * past this call are illegal.
+ */
+extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle);
+
+/* Map a single buffer of the indicated size for DMA in streaming mode.
+ * The 32-bit bus address to use is returned.
+ *
+ * Once the device is given the dma address, the device owns this memory
+ * until either pci_unmap_single or pci_dma_sync_single_for_cpu is performed.
+ */
+extern dma_addr_t pci_map_single(struct pci_dev *hwdev, void *ptr, size_t size, int direction);
+
+/* Unmap a single streaming mode DMA translation.  The dma_addr and size
+ * must match what was provided for in a previous pci_map_single call.  All
+ * other usages are undefined.
+ *
+ * After this call, reads by the cpu to the buffer are guaranteed to see
+ * whatever the device wrote there.
+ */
+extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t size, int direction);
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+/*
+ * Same as above, only with pages instead of mapped addresses.
+ */
+extern dma_addr_t pci_map_page(struct pci_dev *hwdev, struct page *page,
+			unsigned long offset, size_t size, int direction);
+extern void pci_unmap_page(struct pci_dev *hwdev,
+			dma_addr_t dma_address, size_t size, int direction);
+
+/* Map a set of buffers described by scatterlist in streaming
+ * mode for DMA.  This is the scather-gather version of the
+ * above pci_map_single interface.  Here the scatter gather list
+ * elements are each tagged with the appropriate dma address
+ * and length.  They are obtained via sg_dma_{address,length}(SG).
+ *
+ * NOTE: An implementation may be able to use a smaller number of
+ *       DMA address/length pairs than there are SG table elements.
+ *       (for example via virtual mapping capabilities)
+ *       The routine returns the number of addr/length pairs actually
+ *       used, at most nents.
+ *
+ * Device ownership issues as mentioned above for pci_map_single are
+ * the same here.
+ */
+extern int pci_map_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nents, int direction);
+
+/* Unmap a set of streaming mode DMA translations.
+ * Again, cpu read rules concerning calls here are the same as for
+ * pci_unmap_single() above.
+ */
+extern void pci_unmap_sg(struct pci_dev *hwdev, struct scatterlist *sg, int nhwents, int direction);
+
+/* Make physical memory consistent for a single
+ * streaming mode DMA translation after a transfer.
+ *
+ * If you perform a pci_map_single() but wish to interrogate the
+ * buffer using the cpu, yet do not wish to teardown the PCI dma
+ * mapping, you must call this function before doing so.  At the
+ * next point you give the PCI dma address back to the card, you
+ * must first perform a pci_dma_sync_for_device, and then the device
+ * again owns the buffer.
+ */
+extern void pci_dma_sync_single_for_cpu(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
+extern void pci_dma_sync_single_for_device(struct pci_dev *hwdev, dma_addr_t dma_handle, size_t size, int direction);
+
+/* Make physical memory consistent for a set of streaming
+ * mode DMA translations after a transfer.
+ *
+ * The same as pci_dma_sync_single_* but for a scatter-gather list,
+ * same rules and usage.
+ */
+extern void pci_dma_sync_sg_for_cpu(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
+extern void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist *sg, int nelems, int direction);
+
+/* Return whether the given PCI device DMA address mask can
+ * be supported properly.  For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
+{
+	return 1;
+}
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	*strat = PCI_DMA_BURST_INFINITY;
+	*strategy_parameter = ~0UL;
+}
+#endif
+
+#define PCI_DMA_ERROR_CODE      (~(dma_addr_t)0x0)
+
+static inline int pci_dma_mapping_error(struct pci_dev *pdev,
+					dma_addr_t dma_addr)
+{
+        return (dma_addr == PCI_DMA_ERROR_CODE);
+}
+
+struct device_node;
+extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
+
+#endif /* __KERNEL__ */
+
+/* generic pci stuff */
+#include <asm-generic/pci.h>
+
+#endif /* __SPARC_PCI_H */
diff --git a/arch/sparc/include/asm/pci_64.h b/arch/sparc/include/asm/pci_64.h
new file mode 100644
index 000000000000..4f79a54948f6
--- /dev/null
+++ b/arch/sparc/include/asm/pci_64.h
@@ -0,0 +1,210 @@
+#ifndef __SPARC64_PCI_H
+#define __SPARC64_PCI_H
+
+#ifdef __KERNEL__
+
+#include <linux/dma-mapping.h>
+
+/* Can be used to override the logic in pci_scan_bus for skipping
+ * already-configured bus numbers - to be used for buggy BIOSes
+ * or architectures with incomplete PCI setup by the loader.
+ */
+#define pcibios_assign_all_busses()	0
+#define pcibios_scan_all_fns(a, b)	0
+
+#define PCIBIOS_MIN_IO		0UL
+#define PCIBIOS_MIN_MEM		0UL
+
+#define PCI_IRQ_NONE		0xffffffff
+
+#define PCI_CACHE_LINE_BYTES	64
+
+static inline void pcibios_set_master(struct pci_dev *dev)
+{
+	/* No special bus mastering setup handling */
+}
+
+static inline void pcibios_penalize_isa_irq(int irq, int active)
+{
+	/* We don't do dynamic PCI IRQ allocation */
+}
+
+/* The PCI address space does not equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS	(0)
+
+static inline void *pci_alloc_consistent(struct pci_dev *pdev, size_t size,
+					 dma_addr_t *dma_handle)
+{
+	return dma_alloc_coherent(&pdev->dev, size, dma_handle, GFP_ATOMIC);
+}
+
+static inline void pci_free_consistent(struct pci_dev *pdev, size_t size,
+				       void *vaddr, dma_addr_t dma_handle)
+{
+	return dma_free_coherent(&pdev->dev, size, vaddr, dma_handle);
+}
+
+static inline dma_addr_t pci_map_single(struct pci_dev *pdev, void *ptr,
+					size_t size, int direction)
+{
+	return dma_map_single(&pdev->dev, ptr, size,
+			      (enum dma_data_direction) direction);
+}
+
+static inline void pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr,
+				    size_t size, int direction)
+{
+	dma_unmap_single(&pdev->dev, dma_addr, size,
+			 (enum dma_data_direction) direction);
+}
+
+#define pci_map_page(dev, page, off, size, dir) \
+	pci_map_single(dev, (page_address(page) + (off)), size, dir)
+#define pci_unmap_page(dev,addr,sz,dir) \
+	pci_unmap_single(dev,addr,sz,dir)
+
+/* pci_unmap_{single,page} is not a nop, thus... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+static inline int pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg,
+			     int nents, int direction)
+{
+	return dma_map_sg(&pdev->dev, sg, nents,
+			  (enum dma_data_direction) direction);
+}
+
+static inline void pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg,
+				int nents, int direction)
+{
+	dma_unmap_sg(&pdev->dev, sg, nents,
+		     (enum dma_data_direction) direction);
+}
+
+static inline void pci_dma_sync_single_for_cpu(struct pci_dev *pdev,
+					       dma_addr_t dma_handle,
+					       size_t size, int direction)
+{
+	dma_sync_single_for_cpu(&pdev->dev, dma_handle, size,
+				(enum dma_data_direction) direction);
+}
+
+static inline void pci_dma_sync_single_for_device(struct pci_dev *pdev,
+						  dma_addr_t dma_handle,
+						  size_t size, int direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+static inline void pci_dma_sync_sg_for_cpu(struct pci_dev *pdev,
+					   struct scatterlist *sg,
+					   int nents, int direction)
+{
+	dma_sync_sg_for_cpu(&pdev->dev, sg, nents,
+			    (enum dma_data_direction) direction);
+}
+
+static inline void pci_dma_sync_sg_for_device(struct pci_dev *pdev,
+					      struct scatterlist *sg,
+					      int nelems, int direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+/* Return whether the given PCI device DMA address mask can
+ * be supported properly.  For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
+
+/* PCI IOMMU mapping bypass support. */
+
+/* PCI 64-bit addressing works for all slots on all controller
+ * types on sparc64.  However, it requires that the device
+ * can drive enough of the 64 bits.
+ */
+#define PCI64_REQUIRED_MASK	(~(dma64_addr_t)0)
+#define PCI64_ADDR_BASE		0xfffc000000000000UL
+
+static inline int pci_dma_mapping_error(struct pci_dev *pdev,
+					dma_addr_t dma_addr)
+{
+	return dma_mapping_error(&pdev->dev, dma_addr);
+}
+
+#ifdef CONFIG_PCI
+static inline void pci_dma_burst_advice(struct pci_dev *pdev,
+					enum pci_dma_burst_strategy *strat,
+					unsigned long *strategy_parameter)
+{
+	unsigned long cacheline_size;
+	u8 byte;
+
+	pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &byte);
+	if (byte == 0)
+		cacheline_size = 1024;
+	else
+		cacheline_size = (int) byte * 4;
+
+	*strat = PCI_DMA_BURST_BOUNDARY;
+	*strategy_parameter = cacheline_size;
+}
+#endif
+
+/* Return the index of the PCI controller for device PDEV. */
+
+extern int pci_domain_nr(struct pci_bus *bus);
+static inline int pci_proc_domain(struct pci_bus *bus)
+{
+	return 1;
+}
+
+/* Platform support for /proc/bus/pci/X/Y mmap()s. */
+
+#define HAVE_PCI_MMAP
+#define HAVE_ARCH_PCI_GET_UNMAPPED_AREA
+#define get_pci_unmapped_area get_fb_unmapped_area
+
+extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
+			       enum pci_mmap_state mmap_state,
+			       int write_combine);
+
+extern void
+pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+			struct resource *res);
+
+extern void
+pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+			struct pci_bus_region *region);
+
+extern struct resource *pcibios_select_root(struct pci_dev *, struct resource *);
+
+static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+{
+	return PCI_IRQ_NONE;
+}
+
+struct device_node;
+extern struct device_node *pci_device_to_OF_node(struct pci_dev *pdev);
+
+#define HAVE_ARCH_PCI_RESOURCE_TO_USER
+extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
+				 const struct resource *rsrc,
+				 resource_size_t *start, resource_size_t *end);
+#endif /* __KERNEL__ */
+
+#endif /* __SPARC64_PCI_H */
diff --git a/arch/sparc/include/asm/pcic.h b/arch/sparc/include/asm/pcic.h
new file mode 100644
index 000000000000..f20ef562b265
--- /dev/null
+++ b/arch/sparc/include/asm/pcic.h
@@ -0,0 +1,123 @@
+/*
+ * pcic.h: JavaEngine 1 specific PCI definitions.
+ *
+ * Copyright (C) 1998 V. Roganov and G. Raiko
+ */
+
+#ifndef __SPARC_PCIC_H
+#define __SPARC_PCIC_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+#include <linux/smp.h>
+#include <linux/pci.h>
+#include <linux/ioport.h>
+#include <asm/pbm.h>
+
+struct linux_pcic {
+        void __iomem            *pcic_regs;
+        unsigned long           pcic_io;
+        void __iomem            *pcic_config_space_addr;
+        void __iomem            *pcic_config_space_data;
+	struct resource		pcic_res_regs;
+	struct resource		pcic_res_io;
+	struct resource		pcic_res_cfg_addr;
+	struct resource		pcic_res_cfg_data;
+        struct linux_pbm_info   pbm;
+	struct pcic_ca2irq	*pcic_imap;
+	int			pcic_imdim;
+};
+
+extern int pcic_probe(void);
+/* Erm... MJ redefined pcibios_present() so that it does not work early. */
+extern int pcic_present(void);
+extern void sun4m_pci_init_IRQ(void);
+
+#endif
+
+/* Size of PCI I/O space which we relocate. */
+#define PCI_SPACE_SIZE                  0x1000000       /* 16 MB */
+
+/* PCIC Register Set. */
+#define PCI_DIAGNOSTIC_0                0x40    /* 32 bits */
+#define PCI_SIZE_0                      0x44    /* 32 bits */
+#define PCI_SIZE_1                      0x48    /* 32 bits */
+#define PCI_SIZE_2                      0x4c    /* 32 bits */
+#define PCI_SIZE_3                      0x50    /* 32 bits */
+#define PCI_SIZE_4                      0x54    /* 32 bits */
+#define PCI_SIZE_5                      0x58    /* 32 bits */
+#define PCI_PIO_CONTROL                 0x60    /* 8  bits */
+#define PCI_DVMA_CONTROL                0x62    /* 8  bits */
+#define  PCI_DVMA_CONTROL_INACTIVITY_REQ        (1<<0)
+#define  PCI_DVMA_CONTROL_IOTLB_ENABLE          (1<<0)
+#define  PCI_DVMA_CONTROL_IOTLB_DISABLE         0
+#define  PCI_DVMA_CONTROL_INACTIVITY_ACK        (1<<4)
+#define PCI_INTERRUPT_CONTROL           0x63    /* 8  bits */
+#define PCI_CPU_INTERRUPT_PENDING       0x64    /* 32 bits */
+#define PCI_DIAGNOSTIC_1                0x68    /* 16 bits */
+#define PCI_SOFTWARE_INT_CLEAR          0x6a    /* 16 bits */
+#define PCI_SOFTWARE_INT_SET            0x6e    /* 16 bits */
+#define PCI_SYS_INT_PENDING             0x70    /* 32 bits */
+#define  PCI_SYS_INT_PENDING_PIO		0x40000000
+#define  PCI_SYS_INT_PENDING_DMA		0x20000000
+#define  PCI_SYS_INT_PENDING_PCI		0x10000000
+#define  PCI_SYS_INT_PENDING_APSR		0x08000000
+#define PCI_SYS_INT_TARGET_MASK         0x74    /* 32 bits */
+#define PCI_SYS_INT_TARGET_MASK_CLEAR   0x78    /* 32 bits */
+#define PCI_SYS_INT_TARGET_MASK_SET     0x7c    /* 32 bits */
+#define PCI_SYS_INT_PENDING_CLEAR       0x83    /* 8  bits */
+#define  PCI_SYS_INT_PENDING_CLEAR_ALL		0x80
+#define  PCI_SYS_INT_PENDING_CLEAR_PIO		0x40
+#define  PCI_SYS_INT_PENDING_CLEAR_DMA		0x20
+#define  PCI_SYS_INT_PENDING_CLEAR_PCI		0x10
+#define PCI_IOTLB_CONTROL               0x84    /* 8  bits */
+#define PCI_INT_SELECT_LO               0x88    /* 16 bits */
+#define PCI_ARBITRATION_SELECT          0x8a    /* 16 bits */
+#define PCI_INT_SELECT_HI               0x8c    /* 16 bits */
+#define PCI_HW_INT_OUTPUT               0x8e    /* 16 bits */
+#define PCI_IOTLB_RAM_INPUT             0x90    /* 32 bits */
+#define PCI_IOTLB_CAM_INPUT             0x94    /* 32 bits */
+#define PCI_IOTLB_RAM_OUTPUT            0x98    /* 32 bits */
+#define PCI_IOTLB_CAM_OUTPUT            0x9c    /* 32 bits */
+#define PCI_SMBAR0                      0xa0    /* 8  bits */
+#define PCI_MSIZE0                      0xa1    /* 8  bits */
+#define PCI_PMBAR0                      0xa2    /* 8  bits */
+#define PCI_SMBAR1                      0xa4    /* 8  bits */
+#define PCI_MSIZE1                      0xa5    /* 8  bits */
+#define PCI_PMBAR1                      0xa6    /* 8  bits */
+#define PCI_SIBAR                       0xa8    /* 8  bits */
+#define   PCI_SIBAR_ADDRESS_MASK        0xf
+#define PCI_ISIZE                       0xa9    /* 8  bits */
+#define   PCI_ISIZE_16M                 0xf
+#define   PCI_ISIZE_32M                 0xe
+#define   PCI_ISIZE_64M                 0xc
+#define   PCI_ISIZE_128M                0x8
+#define   PCI_ISIZE_256M                0x0
+#define PCI_PIBAR                       0xaa    /* 8  bits */
+#define PCI_CPU_COUNTER_LIMIT_HI        0xac    /* 32 bits */
+#define PCI_CPU_COUNTER_LIMIT_LO        0xb0    /* 32 bits */
+#define PCI_CPU_COUNTER_LIMIT           0xb4    /* 32 bits */
+#define PCI_SYS_LIMIT                   0xb8    /* 32 bits */
+#define PCI_SYS_COUNTER                 0xbc    /* 32 bits */
+#define   PCI_SYS_COUNTER_OVERFLOW      (1<<31) /* Limit reached */
+#define PCI_SYS_LIMIT_PSEUDO            0xc0    /* 32 bits */
+#define PCI_USER_TIMER_CONTROL          0xc4    /* 8  bits */
+#define PCI_USER_TIMER_CONFIG           0xc5    /* 8  bits */
+#define PCI_COUNTER_IRQ                 0xc6    /* 8  bits */
+#define  PCI_COUNTER_IRQ_SET(sys_irq, cpu_irq)  ((((sys_irq) & 0xf) << 4) | \
+                                                  ((cpu_irq) & 0xf))
+#define  PCI_COUNTER_IRQ_SYS(v)                 (((v) >> 4) & 0xf)
+#define  PCI_COUNTER_IRQ_CPU(v)                 ((v) & 0xf)
+#define PCI_PIO_ERROR_COMMAND           0xc7    /* 8  bits */
+#define PCI_PIO_ERROR_ADDRESS           0xc8    /* 32 bits */
+#define PCI_IOTLB_ERROR_ADDRESS         0xcc    /* 32 bits */
+#define PCI_SYS_STATUS                  0xd0    /* 8  bits */
+#define   PCI_SYS_STATUS_RESET_ENABLE           (1<<0)
+#define   PCI_SYS_STATUS_RESET                  (1<<1)
+#define   PCI_SYS_STATUS_WATCHDOG_RESET         (1<<4)
+#define   PCI_SYS_STATUS_PCI_RESET              (1<<5)
+#define   PCI_SYS_STATUS_PCI_RESET_ENABLE       (1<<6)
+#define   PCI_SYS_STATUS_PCI_SATTELITE_MODE     (1<<7)
+
+#endif /* !(__SPARC_PCIC_H) */
diff --git a/arch/sparc/include/asm/percpu.h b/arch/sparc/include/asm/percpu.h
new file mode 100644
index 000000000000..bfb1d19ff1bf
--- /dev/null
+++ b/arch/sparc/include/asm/percpu.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PERCPU_H
+#define ___ASM_SPARC_PERCPU_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/percpu_64.h>
+#else
+#include <asm/percpu_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/percpu_32.h b/arch/sparc/include/asm/percpu_32.h
new file mode 100644
index 000000000000..06066a7aaec3
--- /dev/null
+++ b/arch/sparc/include/asm/percpu_32.h
@@ -0,0 +1,6 @@
+#ifndef __ARCH_SPARC_PERCPU__
+#define __ARCH_SPARC_PERCPU__
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_SPARC_PERCPU__ */
diff --git a/arch/sparc/include/asm/percpu_64.h b/arch/sparc/include/asm/percpu_64.h
new file mode 100644
index 000000000000..bee64593023e
--- /dev/null
+++ b/arch/sparc/include/asm/percpu_64.h
@@ -0,0 +1,28 @@
+#ifndef __ARCH_SPARC64_PERCPU__
+#define __ARCH_SPARC64_PERCPU__
+
+#include <linux/compiler.h>
+
+register unsigned long __local_per_cpu_offset asm("g5");
+
+#ifdef CONFIG_SMP
+
+extern void real_setup_per_cpu_areas(void);
+
+extern unsigned long __per_cpu_base;
+extern unsigned long __per_cpu_shift;
+#define __per_cpu_offset(__cpu) \
+	(__per_cpu_base + ((unsigned long)(__cpu) << __per_cpu_shift))
+#define per_cpu_offset(x) (__per_cpu_offset(x))
+
+#define __my_cpu_offset __local_per_cpu_offset
+
+#else /* ! SMP */
+
+#define real_setup_per_cpu_areas()		do { } while (0)
+
+#endif	/* SMP */
+
+#include <asm-generic/percpu.h>
+
+#endif /* __ARCH_SPARC64_PERCPU__ */
diff --git a/arch/sparc/include/asm/perfctr.h b/arch/sparc/include/asm/perfctr.h
new file mode 100644
index 000000000000..836873002b75
--- /dev/null
+++ b/arch/sparc/include/asm/perfctr.h
@@ -0,0 +1,173 @@
+/*----------------------------------------
+  PERFORMANCE INSTRUMENTATION  
+  Guillaume Thouvenin           08/10/98
+  David S. Miller               10/06/98
+  ---------------------------------------*/
+#ifndef PERF_COUNTER_API
+#define PERF_COUNTER_API
+
+/* sys_perfctr() interface.  First arg is operation code
+ * from enumeration below.  The meaning of further arguments
+ * are determined by the operation code.
+ *
+ * int sys_perfctr(int opcode, unsigned long arg0,
+ *                 unsigned long arg1, unsigned long arg2)
+ *
+ * Pointers which are passed by the user are pointers to 64-bit
+ * integers.
+ *
+ * Once enabled, performance counter state is retained until the
+ * process either exits or performs an exec.  That is, performance
+ * counters remain enabled for fork/clone children.
+ */
+enum perfctr_opcode {
+	/* Enable UltraSparc performance counters, ARG0 is pointer
+	 * to 64-bit accumulator for D0 counter in PIC, ARG1 is pointer
+	 * to 64-bit accumulator for D1 counter.  ARG2 is a pointer to
+	 * the initial PCR register value to use.
+	 */
+	PERFCTR_ON,
+
+	/* Disable UltraSparc performance counters.  The PCR is written
+	 * with zero and the user counter accumulator pointers and
+	 * working PCR register value are forgotten.
+	 */
+	PERFCTR_OFF,
+
+	/* Add current D0 and D1 PIC values into user pointers given
+	 * in PERFCTR_ON operation.  The PIC is cleared before returning.
+	 */
+	PERFCTR_READ,
+
+	/* Clear the PIC register. */
+	PERFCTR_CLRPIC,
+
+	/* Begin using a new PCR value, the pointer to which is passed
+	 * in ARG0.  The PIC is also cleared after the new PCR value is
+	 * written.
+	 */
+	PERFCTR_SETPCR,
+
+	/* Store in pointer given in ARG0 the current PCR register value
+	 * being used.
+	 */
+	PERFCTR_GETPCR
+};
+
+/* I don't want the kernel's namespace to be polluted with this
+ * stuff when this file is included.  --DaveM
+ */
+#ifndef __KERNEL__
+
+#define  PRIV 0x00000001
+#define  SYS  0x00000002
+#define  USR  0x00000004
+
+/* Pic.S0 Selection Bit Field Encoding, Ultra-I/II  */
+#define  CYCLE_CNT            0x00000000
+#define  INSTR_CNT            0x00000010
+#define  DISPATCH0_IC_MISS    0x00000020
+#define  DISPATCH0_STOREBUF   0x00000030
+#define  IC_REF               0x00000080
+#define  DC_RD                0x00000090
+#define  DC_WR                0x000000A0
+#define  LOAD_USE             0x000000B0
+#define  EC_REF               0x000000C0
+#define  EC_WRITE_HIT_RDO     0x000000D0
+#define  EC_SNOOP_INV         0x000000E0
+#define  EC_RD_HIT            0x000000F0
+
+/* Pic.S0 Selection Bit Field Encoding, Ultra-III  */
+#define  US3_CYCLE_CNT	      	0x00000000
+#define  US3_INSTR_CNT	      	0x00000010
+#define  US3_DISPATCH0_IC_MISS	0x00000020
+#define  US3_DISPATCH0_BR_TGT	0x00000030
+#define  US3_DISPATCH0_2ND_BR	0x00000040
+#define  US3_RSTALL_STOREQ	0x00000050
+#define  US3_RSTALL_IU_USE	0x00000060
+#define  US3_IC_REF		0x00000080
+#define  US3_DC_RD		0x00000090
+#define  US3_DC_WR		0x000000a0
+#define  US3_EC_REF		0x000000c0
+#define  US3_EC_WR_HIT_RTO	0x000000d0
+#define  US3_EC_SNOOP_INV	0x000000e0
+#define  US3_EC_RD_MISS		0x000000f0
+#define  US3_PC_PORT0_RD	0x00000100
+#define  US3_SI_SNOOP		0x00000110
+#define  US3_SI_CIQ_FLOW	0x00000120
+#define  US3_SI_OWNED		0x00000130
+#define  US3_SW_COUNT_0		0x00000140
+#define  US3_IU_BR_MISS_TAKEN	0x00000150
+#define  US3_IU_BR_COUNT_TAKEN	0x00000160
+#define  US3_DISP_RS_MISPRED	0x00000170
+#define  US3_FA_PIPE_COMPL	0x00000180
+#define  US3_MC_READS_0		0x00000200
+#define  US3_MC_READS_1		0x00000210
+#define  US3_MC_READS_2		0x00000220
+#define  US3_MC_READS_3		0x00000230
+#define  US3_MC_STALLS_0	0x00000240
+#define  US3_MC_STALLS_2	0x00000250
+
+/* Pic.S1 Selection Bit Field Encoding, Ultra-I/II  */
+#define  CYCLE_CNT_D1         0x00000000
+#define  INSTR_CNT_D1         0x00000800
+#define  DISPATCH0_IC_MISPRED 0x00001000
+#define  DISPATCH0_FP_USE     0x00001800
+#define  IC_HIT               0x00004000
+#define  DC_RD_HIT            0x00004800
+#define  DC_WR_HIT            0x00005000
+#define  LOAD_USE_RAW         0x00005800
+#define  EC_HIT               0x00006000
+#define  EC_WB                0x00006800
+#define  EC_SNOOP_CB          0x00007000
+#define  EC_IT_HIT            0x00007800
+
+/* Pic.S1 Selection Bit Field Encoding, Ultra-III  */
+#define  US3_CYCLE_CNT_D1	0x00000000
+#define  US3_INSTR_CNT_D1	0x00000800
+#define  US3_DISPATCH0_MISPRED	0x00001000
+#define  US3_IC_MISS_CANCELLED	0x00001800
+#define  US3_RE_ENDIAN_MISS	0x00002000
+#define  US3_RE_FPU_BYPASS	0x00002800
+#define  US3_RE_DC_MISS		0x00003000
+#define  US3_RE_EC_MISS		0x00003800
+#define  US3_IC_MISS		0x00004000
+#define  US3_DC_RD_MISS		0x00004800
+#define  US3_DC_WR_MISS		0x00005000
+#define  US3_RSTALL_FP_USE	0x00005800
+#define  US3_EC_MISSES		0x00006000
+#define  US3_EC_WB		0x00006800
+#define  US3_EC_SNOOP_CB	0x00007000
+#define  US3_EC_IC_MISS		0x00007800
+#define  US3_RE_PC_MISS		0x00008000
+#define  US3_ITLB_MISS		0x00008800
+#define  US3_DTLB_MISS		0x00009000
+#define  US3_WC_MISS		0x00009800
+#define  US3_WC_SNOOP_CB	0x0000a000
+#define  US3_WC_SCRUBBED	0x0000a800
+#define  US3_WC_WB_WO_READ	0x0000b000
+#define  US3_PC_SOFT_HIT	0x0000c000
+#define  US3_PC_SNOOP_INV	0x0000c800
+#define  US3_PC_HARD_HIT	0x0000d000
+#define  US3_PC_PORT1_RD	0x0000d800
+#define  US3_SW_COUNT_1		0x0000e000
+#define  US3_IU_STAT_BR_MIS_UNTAKEN	0x0000e800
+#define  US3_IU_STAT_BR_COUNT_UNTAKEN	0x0000f000
+#define  US3_PC_MS_MISSES	0x0000f800
+#define  US3_MC_WRITES_0	0x00010800
+#define  US3_MC_WRITES_1	0x00011000
+#define  US3_MC_WRITES_2	0x00011800
+#define  US3_MC_WRITES_3	0x00012000
+#define  US3_MC_STALLS_1	0x00012800
+#define  US3_MC_STALLS_3	0x00013000
+#define  US3_RE_RAW_MISS	0x00013800
+#define  US3_FM_PIPE_COMPLETION	0x00014000
+
+struct vcounter_struct {
+  unsigned long long vcnt0;
+  unsigned long long vcnt1;
+};
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(PERF_COUNTER_API) */
diff --git a/arch/sparc/include/asm/pgalloc.h b/arch/sparc/include/asm/pgalloc.h
new file mode 100644
index 000000000000..b6db1f7cdcab
--- /dev/null
+++ b/arch/sparc/include/asm/pgalloc.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PGALLOC_H
+#define ___ASM_SPARC_PGALLOC_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pgalloc_64.h>
+#else
+#include <asm/pgalloc_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/pgalloc_32.h b/arch/sparc/include/asm/pgalloc_32.h
new file mode 100644
index 000000000000..681582d26969
--- /dev/null
+++ b/arch/sparc/include/asm/pgalloc_32.h
@@ -0,0 +1,68 @@
+#ifndef _SPARC_PGALLOC_H
+#define _SPARC_PGALLOC_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+#include <asm/page.h>
+#include <asm/btfixup.h>
+
+struct page;
+
+extern struct pgtable_cache_struct {
+	unsigned long *pgd_cache;
+	unsigned long *pte_cache;
+	unsigned long pgtable_cache_sz;
+	unsigned long pgd_cache_sz;
+} pgt_quicklists;
+#define pgd_quicklist           (pgt_quicklists.pgd_cache)
+#define pmd_quicklist           ((unsigned long *)0)
+#define pte_quicklist           (pgt_quicklists.pte_cache)
+#define pgtable_cache_size      (pgt_quicklists.pgtable_cache_sz)
+#define pgd_cache_size		(pgt_quicklists.pgd_cache_sz)
+
+extern void check_pgt_cache(void);
+BTFIXUPDEF_CALL(void,	 do_check_pgt_cache, int, int)
+#define do_check_pgt_cache(low,high) BTFIXUP_CALL(do_check_pgt_cache)(low,high)
+
+BTFIXUPDEF_CALL(pgd_t *, get_pgd_fast, void)
+#define get_pgd_fast()		BTFIXUP_CALL(get_pgd_fast)()
+
+BTFIXUPDEF_CALL(void, free_pgd_fast, pgd_t *)
+#define free_pgd_fast(pgd)	BTFIXUP_CALL(free_pgd_fast)(pgd)
+
+#define pgd_free(mm, pgd)	free_pgd_fast(pgd)
+#define pgd_alloc(mm)	get_pgd_fast()
+
+BTFIXUPDEF_CALL(void, pgd_set, pgd_t *, pmd_t *)
+#define pgd_set(pgdp,pmdp) BTFIXUP_CALL(pgd_set)(pgdp,pmdp)
+#define pgd_populate(MM, PGD, PMD)      pgd_set(PGD, PMD)
+
+BTFIXUPDEF_CALL(pmd_t *, pmd_alloc_one, struct mm_struct *, unsigned long)
+#define pmd_alloc_one(mm, address)	BTFIXUP_CALL(pmd_alloc_one)(mm, address)
+
+BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *)
+#define free_pmd_fast(pmd)	BTFIXUP_CALL(free_pmd_fast)(pmd)
+
+#define pmd_free(mm, pmd)	free_pmd_fast(pmd)
+#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
+
+BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *)
+#define pmd_populate(MM, PMD, PTE)        BTFIXUP_CALL(pmd_populate)(PMD, PTE)
+#define pmd_pgtable(pmd) pmd_page(pmd)
+BTFIXUPDEF_CALL(void, pmd_set, pmd_t *, pte_t *)
+#define pmd_populate_kernel(MM, PMD, PTE) BTFIXUP_CALL(pmd_set)(PMD, PTE)
+
+BTFIXUPDEF_CALL(pgtable_t , pte_alloc_one, struct mm_struct *, unsigned long)
+#define pte_alloc_one(mm, address)	BTFIXUP_CALL(pte_alloc_one)(mm, address)
+BTFIXUPDEF_CALL(pte_t *, pte_alloc_one_kernel, struct mm_struct *, unsigned long)
+#define pte_alloc_one_kernel(mm, addr)	BTFIXUP_CALL(pte_alloc_one_kernel)(mm, addr)
+
+BTFIXUPDEF_CALL(void, free_pte_fast, pte_t *)
+#define pte_free_kernel(mm, pte)	BTFIXUP_CALL(free_pte_fast)(pte)
+
+BTFIXUPDEF_CALL(void, pte_free, pgtable_t )
+#define pte_free(mm, pte)	BTFIXUP_CALL(pte_free)(pte)
+#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
+
+#endif /* _SPARC_PGALLOC_H */
diff --git a/arch/sparc/include/asm/pgalloc_64.h b/arch/sparc/include/asm/pgalloc_64.h
new file mode 100644
index 000000000000..5bdfa2c6e400
--- /dev/null
+++ b/arch/sparc/include/asm/pgalloc_64.h
@@ -0,0 +1,81 @@
+#ifndef _SPARC64_PGALLOC_H
+#define _SPARC64_PGALLOC_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/quicklist.h>
+
+#include <asm/spitfire.h>
+#include <asm/cpudata.h>
+#include <asm/cacheflush.h>
+#include <asm/page.h>
+
+/* Page table allocation/freeing. */
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+	return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+	quicklist_free(0, NULL, pgd);
+}
+
+#define pud_populate(MM, PUD, PMD)	pud_set(PUD, PMD)
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
+{
+	return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+	quicklist_free(0, NULL, pmd);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+					  unsigned long address)
+{
+	return quicklist_alloc(0, GFP_KERNEL, NULL);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+					unsigned long address)
+{
+	struct page *page;
+	void *pg;
+
+	pg = quicklist_alloc(0, GFP_KERNEL, NULL);
+	if (!pg)
+		return NULL;
+	page = virt_to_page(pg);
+	pgtable_page_ctor(page);
+	return page;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+	quicklist_free(0, NULL, pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)
+{
+	pgtable_page_dtor(ptepage);
+	quicklist_free_page(0, NULL, ptepage);
+}
+
+
+#define pmd_populate_kernel(MM, PMD, PTE)	pmd_set(PMD, PTE)
+#define pmd_populate(MM,PMD,PTE_PAGE)		\
+	pmd_populate_kernel(MM,PMD,page_address(PTE_PAGE))
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline void check_pgt_cache(void)
+{
+	quicklist_trim(0, NULL, 25, 16);
+}
+
+#endif /* _SPARC64_PGALLOC_H */
diff --git a/arch/sparc/include/asm/pgtable.h b/arch/sparc/include/asm/pgtable.h
new file mode 100644
index 000000000000..59ba6f620732
--- /dev/null
+++ b/arch/sparc/include/asm/pgtable.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PGTABLE_H
+#define ___ASM_SPARC_PGTABLE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/pgtable_64.h>
+#else
+#include <asm/pgtable_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h
new file mode 100644
index 000000000000..08237fda8874
--- /dev/null
+++ b/arch/sparc/include/asm/pgtable_32.h
@@ -0,0 +1,480 @@
+#ifndef _SPARC_PGTABLE_H
+#define _SPARC_PGTABLE_H
+
+/*  asm/pgtable.h:  Defines and functions used to work
+ *                        with Sparc page tables.
+ *
+ *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *  Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __ASSEMBLY__
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/spinlock.h>
+#include <linux/swap.h>
+#include <asm/types.h>
+#ifdef CONFIG_SUN4
+#include <asm/pgtsun4.h>
+#else
+#include <asm/pgtsun4c.h>
+#endif
+#include <asm/pgtsrmmu.h>
+#include <asm/vac-ops.h>
+#include <asm/oplib.h>
+#include <asm/btfixup.h>
+#include <asm/system.h>
+
+
+struct vm_area_struct;
+struct page;
+
+extern void load_mmu(void);
+extern unsigned long calc_highpages(void);
+
+BTFIXUPDEF_SIMM13(pgdir_shift)
+BTFIXUPDEF_SETHI(pgdir_size)
+BTFIXUPDEF_SETHI(pgdir_mask)
+
+BTFIXUPDEF_SIMM13(ptrs_per_pmd)
+BTFIXUPDEF_SIMM13(ptrs_per_pgd)
+BTFIXUPDEF_SIMM13(user_ptrs_per_pgd)
+
+#define pte_ERROR(e)   __builtin_trap()
+#define pmd_ERROR(e)   __builtin_trap()
+#define pgd_ERROR(e)   __builtin_trap()
+
+BTFIXUPDEF_INT(page_none)
+BTFIXUPDEF_INT(page_copy)
+BTFIXUPDEF_INT(page_readonly)
+BTFIXUPDEF_INT(page_kernel)
+
+#define PMD_SHIFT		SUN4C_PMD_SHIFT
+#define PMD_SIZE        	(1UL << PMD_SHIFT)
+#define PMD_MASK        	(~(PMD_SIZE-1))
+#define PMD_ALIGN(__addr) 	(((__addr) + ~PMD_MASK) & PMD_MASK)
+#define PGDIR_SHIFT     	BTFIXUP_SIMM13(pgdir_shift)
+#define PGDIR_SIZE      	BTFIXUP_SETHI(pgdir_size)
+#define PGDIR_MASK      	BTFIXUP_SETHI(pgdir_mask)
+#define PTRS_PER_PTE    	1024
+#define PTRS_PER_PMD    	BTFIXUP_SIMM13(ptrs_per_pmd)
+#define PTRS_PER_PGD    	BTFIXUP_SIMM13(ptrs_per_pgd)
+#define USER_PTRS_PER_PGD	BTFIXUP_SIMM13(user_ptrs_per_pgd)
+#define FIRST_USER_ADDRESS	0
+#define PTE_SIZE		(PTRS_PER_PTE*4)
+
+#define PAGE_NONE      __pgprot(BTFIXUP_INT(page_none))
+extern pgprot_t PAGE_SHARED;
+#define PAGE_COPY      __pgprot(BTFIXUP_INT(page_copy))
+#define PAGE_READONLY  __pgprot(BTFIXUP_INT(page_readonly))
+
+extern unsigned long page_kernel;
+
+#ifdef MODULE
+#define PAGE_KERNEL	page_kernel
+#else
+#define PAGE_KERNEL    __pgprot(BTFIXUP_INT(page_kernel))
+#endif
+
+/* Top-level page directory */
+extern pgd_t swapper_pg_dir[1024];
+
+extern void paging_init(void);
+
+/* Page table for 0-4MB for everybody, on the Sparc this
+ * holds the same as on the i386.
+ */
+extern pte_t pg0[1024];
+extern pte_t pg1[1024];
+extern pte_t pg2[1024];
+extern pte_t pg3[1024];
+
+extern unsigned long ptr_in_current_pgd;
+
+/* Here is a trick, since mmap.c need the initializer elements for
+ * protection_map[] to be constant at compile time, I set the following
+ * to all zeros.  I set it to the real values after I link in the
+ * appropriate MMU page table routines at boot time.
+ */
+#define __P000  __pgprot(0)
+#define __P001  __pgprot(0)
+#define __P010  __pgprot(0)
+#define __P011  __pgprot(0)
+#define __P100  __pgprot(0)
+#define __P101  __pgprot(0)
+#define __P110  __pgprot(0)
+#define __P111  __pgprot(0)
+
+#define __S000	__pgprot(0)
+#define __S001	__pgprot(0)
+#define __S010	__pgprot(0)
+#define __S011	__pgprot(0)
+#define __S100	__pgprot(0)
+#define __S101	__pgprot(0)
+#define __S110	__pgprot(0)
+#define __S111	__pgprot(0)
+
+extern int num_contexts;
+
+/* First physical page can be anywhere, the following is needed so that
+ * va-->pa and vice versa conversions work properly without performance
+ * hit for all __pa()/__va() operations.
+ */
+extern unsigned long phys_base;
+extern unsigned long pfn_base;
+
+/*
+ * BAD_PAGETABLE is used when we need a bogus page-table, while
+ * BAD_PAGE is used for a bogus page.
+ *
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern pte_t * __bad_pagetable(void);
+extern pte_t __bad_page(void);
+extern unsigned long empty_zero_page;
+
+#define BAD_PAGETABLE __bad_pagetable()
+#define BAD_PAGE __bad_page()
+#define ZERO_PAGE(vaddr) (virt_to_page(&empty_zero_page))
+
+/*
+ */
+BTFIXUPDEF_CALL_CONST(struct page *, pmd_page, pmd_t)
+BTFIXUPDEF_CALL_CONST(unsigned long, pgd_page_vaddr, pgd_t)
+
+#define pmd_page(pmd) BTFIXUP_CALL(pmd_page)(pmd)
+#define pgd_page_vaddr(pgd) BTFIXUP_CALL(pgd_page_vaddr)(pgd)
+
+BTFIXUPDEF_SETHI(none_mask)
+BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t)
+BTFIXUPDEF_CALL(void, pte_clear, pte_t *)
+
+static inline int pte_none(pte_t pte)
+{
+	return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask));
+}
+
+#define pte_present(pte) BTFIXUP_CALL(pte_present)(pte)
+#define pte_clear(mm,addr,pte) BTFIXUP_CALL(pte_clear)(pte)
+
+BTFIXUPDEF_CALL_CONST(int, pmd_bad, pmd_t)
+BTFIXUPDEF_CALL_CONST(int, pmd_present, pmd_t)
+BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *)
+
+static inline int pmd_none(pmd_t pmd)
+{
+	return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask));
+}
+
+#define pmd_bad(pmd) BTFIXUP_CALL(pmd_bad)(pmd)
+#define pmd_present(pmd) BTFIXUP_CALL(pmd_present)(pmd)
+#define pmd_clear(pmd) BTFIXUP_CALL(pmd_clear)(pmd)
+
+BTFIXUPDEF_CALL_CONST(int, pgd_none, pgd_t)
+BTFIXUPDEF_CALL_CONST(int, pgd_bad, pgd_t)
+BTFIXUPDEF_CALL_CONST(int, pgd_present, pgd_t)
+BTFIXUPDEF_CALL(void, pgd_clear, pgd_t *)
+
+#define pgd_none(pgd) BTFIXUP_CALL(pgd_none)(pgd)
+#define pgd_bad(pgd) BTFIXUP_CALL(pgd_bad)(pgd)
+#define pgd_present(pgd) BTFIXUP_CALL(pgd_present)(pgd)
+#define pgd_clear(pgd) BTFIXUP_CALL(pgd_clear)(pgd)
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+BTFIXUPDEF_HALF(pte_writei)
+BTFIXUPDEF_HALF(pte_dirtyi)
+BTFIXUPDEF_HALF(pte_youngi)
+
+static int pte_write(pte_t pte) __attribute_const__;
+static inline int pte_write(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_writei);
+}
+
+static int pte_dirty(pte_t pte) __attribute_const__;
+static inline int pte_dirty(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_dirtyi);
+}
+
+static int pte_young(pte_t pte) __attribute_const__;
+static inline int pte_young(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_youngi);
+}
+
+/*
+ * The following only work if pte_present() is not true.
+ */
+BTFIXUPDEF_HALF(pte_filei)
+
+static int pte_file(pte_t pte) __attribute_const__;
+static inline int pte_file(pte_t pte)
+{
+	return pte_val(pte) & BTFIXUP_HALF(pte_filei);
+}
+
+static inline int pte_special(pte_t pte)
+{
+	return 0;
+}
+
+/*
+ */
+BTFIXUPDEF_HALF(pte_wrprotecti)
+BTFIXUPDEF_HALF(pte_mkcleani)
+BTFIXUPDEF_HALF(pte_mkoldi)
+
+static pte_t pte_wrprotect(pte_t pte) __attribute_const__;
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_wrprotecti));
+}
+
+static pte_t pte_mkclean(pte_t pte) __attribute_const__;
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkcleani));
+}
+
+static pte_t pte_mkold(pte_t pte) __attribute_const__;
+static inline pte_t pte_mkold(pte_t pte)
+{
+	return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkoldi));
+}
+
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkwrite, pte_t)
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkdirty, pte_t)
+BTFIXUPDEF_CALL_CONST(pte_t, pte_mkyoung, pte_t)
+
+#define pte_mkwrite(pte) BTFIXUP_CALL(pte_mkwrite)(pte)
+#define pte_mkdirty(pte) BTFIXUP_CALL(pte_mkdirty)(pte)
+#define pte_mkyoung(pte) BTFIXUP_CALL(pte_mkyoung)(pte)
+
+#define pte_mkspecial(pte)    (pte)
+
+#define pfn_pte(pfn, prot)		mk_pte(pfn_to_page(pfn), prot)
+
+BTFIXUPDEF_CALL(unsigned long,	 pte_pfn, pte_t)
+#define pte_pfn(pte) BTFIXUP_CALL(pte_pfn)(pte)
+#define pte_page(pte)	pfn_to_page(pte_pfn(pte))
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte, struct page *, pgprot_t)
+
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_phys, unsigned long, pgprot_t)
+BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_io, unsigned long, pgprot_t, int)
+BTFIXUPDEF_CALL_CONST(pgprot_t, pgprot_noncached, pgprot_t)
+
+#define mk_pte(page,pgprot) BTFIXUP_CALL(mk_pte)(page,pgprot)
+#define mk_pte_phys(page,pgprot) BTFIXUP_CALL(mk_pte_phys)(page,pgprot)
+#define mk_pte_io(page,pgprot,space) BTFIXUP_CALL(mk_pte_io)(page,pgprot,space)
+
+#define pgprot_noncached(pgprot) BTFIXUP_CALL(pgprot_noncached)(pgprot)
+
+BTFIXUPDEF_INT(pte_modify_mask)
+
+static pte_t pte_modify(pte_t pte, pgprot_t newprot) __attribute_const__;
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & BTFIXUP_INT(pte_modify_mask)) |
+		pgprot_val(newprot));
+}
+
+#define pgd_index(address) ((address) >> PGDIR_SHIFT)
+
+/* to find an entry in a page-table-directory */
+#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level page table.. */
+BTFIXUPDEF_CALL(pmd_t *, pmd_offset, pgd_t *, unsigned long)
+#define pmd_offset(dir,addr) BTFIXUP_CALL(pmd_offset)(dir,addr)
+
+/* Find an entry in the third-level page table.. */
+BTFIXUPDEF_CALL(pte_t *, pte_offset_kernel, pmd_t *, unsigned long)
+#define pte_offset_kernel(dir,addr) BTFIXUP_CALL(pte_offset_kernel)(dir,addr)
+
+/*
+ * This shortcut works on sun4m (and sun4d) because the nocache area is static,
+ * and sun4c is guaranteed to have no highmem anyway.
+ */
+#define pte_offset_map(d, a)		pte_offset_kernel(d,a)
+#define pte_offset_map_nested(d, a)	pte_offset_kernel(d,a)
+
+#define pte_unmap(pte)		do{}while(0)
+#define pte_unmap_nested(pte)	do{}while(0)
+
+/* Certain architectures need to do special things when pte's
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+
+BTFIXUPDEF_CALL(void, set_pte, pte_t *, pte_t)
+
+#define set_pte(ptep,pteval) BTFIXUP_CALL(set_pte)(ptep,pteval)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+struct seq_file;
+BTFIXUPDEF_CALL(void, mmu_info, struct seq_file *)
+
+#define mmu_info(p) BTFIXUP_CALL(mmu_info)(p)
+
+/* Fault handler stuff... */
+#define FAULT_CODE_PROT     0x1
+#define FAULT_CODE_WRITE    0x2
+#define FAULT_CODE_USER     0x4
+
+BTFIXUPDEF_CALL(void, update_mmu_cache, struct vm_area_struct *, unsigned long, pte_t)
+
+#define update_mmu_cache(vma,addr,pte) BTFIXUP_CALL(update_mmu_cache)(vma,addr,pte)
+
+BTFIXUPDEF_CALL(void, sparc_mapiorange, unsigned int, unsigned long,
+    unsigned long, unsigned int)
+BTFIXUPDEF_CALL(void, sparc_unmapiorange, unsigned long, unsigned int)
+#define sparc_mapiorange(bus,pa,va,len) BTFIXUP_CALL(sparc_mapiorange)(bus,pa,va,len)
+#define sparc_unmapiorange(va,len) BTFIXUP_CALL(sparc_unmapiorange)(va,len)
+
+extern int invalid_segment;
+
+/* Encode and de-code a swap entry */
+BTFIXUPDEF_CALL(unsigned long, __swp_type, swp_entry_t)
+BTFIXUPDEF_CALL(unsigned long, __swp_offset, swp_entry_t)
+BTFIXUPDEF_CALL(swp_entry_t, __swp_entry, unsigned long, unsigned long)
+
+#define __swp_type(__x)			BTFIXUP_CALL(__swp_type)(__x)
+#define __swp_offset(__x)		BTFIXUP_CALL(__swp_offset)(__x)
+#define __swp_entry(__type,__off)	BTFIXUP_CALL(__swp_entry)(__type,__off)
+
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+/* file-offset-in-pte helpers */
+BTFIXUPDEF_CALL(unsigned long, pte_to_pgoff, pte_t pte);
+BTFIXUPDEF_CALL(pte_t, pgoff_to_pte, unsigned long pgoff);
+
+#define pte_to_pgoff(pte) BTFIXUP_CALL(pte_to_pgoff)(pte)
+#define pgoff_to_pte(off) BTFIXUP_CALL(pgoff_to_pte)(off)
+
+/*
+ * This is made a constant because mm/fremap.c required a constant.
+ * Note that layout of these bits is different between sun4c.c and srmmu.c.
+ */
+#define PTE_FILE_MAX_BITS 24
+
+/*
+ */
+struct ctx_list {
+	struct ctx_list *next;
+	struct ctx_list *prev;
+	unsigned int ctx_number;
+	struct mm_struct *ctx_mm;
+};
+
+extern struct ctx_list *ctx_list_pool;  /* Dynamically allocated */
+extern struct ctx_list ctx_free;        /* Head of free list */
+extern struct ctx_list ctx_used;        /* Head of used contexts list */
+
+#define NO_CONTEXT     -1
+
+static inline void remove_from_ctx_list(struct ctx_list *entry)
+{
+	entry->next->prev = entry->prev;
+	entry->prev->next = entry->next;
+}
+
+static inline void add_to_ctx_list(struct ctx_list *head, struct ctx_list *entry)
+{
+	entry->next = head;
+	(entry->prev = head->prev)->next = entry;
+	head->prev = entry;
+}
+#define add_to_free_ctxlist(entry) add_to_ctx_list(&ctx_free, entry)
+#define add_to_used_ctxlist(entry) add_to_ctx_list(&ctx_used, entry)
+
+static inline unsigned long
+__get_phys (unsigned long addr)
+{
+	switch (sparc_cpu_model){
+	case sun4:
+	case sun4c:
+		return sun4c_get_pte (addr) << PAGE_SHIFT;
+	case sun4m:
+	case sun4d:
+		return ((srmmu_get_pte (addr) & 0xffffff00) << 4);
+	default:
+		return 0;
+	}
+}
+
+static inline int
+__get_iospace (unsigned long addr)
+{
+	switch (sparc_cpu_model){
+	case sun4:
+	case sun4c:
+		return -1; /* Don't check iospace on sun4c */
+	case sun4m:
+	case sun4d:
+		return (srmmu_get_pte (addr) >> 28);
+	default:
+		return -1;
+	}
+}
+
+extern unsigned long *sparc_valid_addr_bitmap;
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr) \
+	(test_bit(__pa((unsigned long)(addr))>>20, sparc_valid_addr_bitmap))
+
+extern int io_remap_pfn_range(struct vm_area_struct *vma,
+			      unsigned long from, unsigned long pfn,
+			      unsigned long size, pgprot_t prot);
+
+/*
+ * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
+ * its high 4 bits.  These macros/functions put it there or get it from there.
+ */
+#define MK_IOSPACE_PFN(space, pfn)	(pfn | (space << (BITS_PER_LONG - 4)))
+#define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
+#define GET_PFN(pfn)			(pfn & 0x0fffffffUL)
+
+#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS
+#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \
+({									  \
+	int __changed = !pte_same(*(__ptep), __entry);			  \
+	if (__changed) {						  \
+		set_pte_at((__vma)->vm_mm, (__address), __ptep, __entry); \
+		flush_tlb_page(__vma, __address);			  \
+	}								  \
+	(sparc_cpu_model == sun4c) || __changed;			  \
+})
+
+#include <asm-generic/pgtable.h>
+
+#endif /* !(__ASSEMBLY__) */
+
+#define VMALLOC_START           0xfe600000
+/* XXX Alter this when I get around to fixing sun4c - Anton */
+#define VMALLOC_END             0xffc00000
+
+
+/* We provide our own get_unmapped_area to cope with VA holes for userland */
+#define HAVE_ARCH_UNMAPPED_AREA
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()	do { } while (0)
+
+#endif /* !(_SPARC_PGTABLE_H) */
diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h
new file mode 100644
index 000000000000..bb9ec2cce355
--- /dev/null
+++ b/arch/sparc/include/asm/pgtable_64.h
@@ -0,0 +1,775 @@
+/*
+ * pgtable.h: SpitFire page table operations.
+ *
+ * Copyright 1996,1997 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef _SPARC64_PGTABLE_H
+#define _SPARC64_PGTABLE_H
+
+/* This file contains the functions and defines necessary to modify and use
+ * the SpitFire page tables.
+ */
+
+#include <asm-generic/pgtable-nopud.h>
+
+#include <linux/compiler.h>
+#include <linux/const.h>
+#include <asm/types.h>
+#include <asm/spitfire.h>
+#include <asm/asi.h>
+#include <asm/system.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+
+/* The kernel image occupies 0x4000000 to 0x6000000 (4MB --> 96MB).
+ * The page copy blockops can use 0x6000000 to 0x8000000.
+ * The TSB is mapped in the 0x8000000 to 0xa000000 range.
+ * The PROM resides in an area spanning 0xf0000000 to 0x100000000.
+ * The vmalloc area spans 0x100000000 to 0x200000000.
+ * Since modules need to be in the lowest 32-bits of the address space,
+ * we place them right before the OBP area from 0x10000000 to 0xf0000000.
+ * There is a single static kernel PMD which maps from 0x0 to address
+ * 0x400000000.
+ */
+#define	TLBTEMP_BASE		_AC(0x0000000006000000,UL)
+#define	TSBMAP_BASE		_AC(0x0000000008000000,UL)
+#define MODULES_VADDR		_AC(0x0000000010000000,UL)
+#define MODULES_LEN		_AC(0x00000000e0000000,UL)
+#define MODULES_END		_AC(0x00000000f0000000,UL)
+#define LOW_OBP_ADDRESS		_AC(0x00000000f0000000,UL)
+#define HI_OBP_ADDRESS		_AC(0x0000000100000000,UL)
+#define VMALLOC_START		_AC(0x0000000100000000,UL)
+#define VMALLOC_END		_AC(0x0000000200000000,UL)
+#define VMEMMAP_BASE		_AC(0x0000000200000000,UL)
+
+#define vmemmap			((struct page *)VMEMMAP_BASE)
+
+/* XXX All of this needs to be rethought so we can take advantage
+ * XXX cheetah's full 64-bit virtual address space, ie. no more hole
+ * XXX in the middle like on spitfire. -DaveM
+ */
+/*
+ * Given a virtual address, the lowest PAGE_SHIFT bits determine offset
+ * into the page; the next higher PAGE_SHIFT-3 bits determine the pte#
+ * in the proper pagetable (the -3 is from the 8 byte ptes, and each page
+ * table is a single page long). The next higher PMD_BITS determine pmd#
+ * in the proper pmdtable (where we must have PMD_BITS <= (PAGE_SHIFT-2)
+ * since the pmd entries are 4 bytes, and each pmd page is a single page
+ * long). Finally, the higher few bits determine pgde#.
+ */
+
+/* PMD_SHIFT determines the size of the area a second-level page
+ * table can map
+ */
+#define PMD_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3))
+#define PMD_SIZE	(_AC(1,UL) << PMD_SHIFT)
+#define PMD_MASK	(~(PMD_SIZE-1))
+#define PMD_BITS	(PAGE_SHIFT - 2)
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define PGDIR_SHIFT	(PAGE_SHIFT + (PAGE_SHIFT-3) + PMD_BITS)
+#define PGDIR_SIZE	(_AC(1,UL) << PGDIR_SHIFT)
+#define PGDIR_MASK	(~(PGDIR_SIZE-1))
+#define PGDIR_BITS	(PAGE_SHIFT - 2)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/sched.h>
+
+/* Entries per page directory level. */
+#define PTRS_PER_PTE	(1UL << (PAGE_SHIFT-3))
+#define PTRS_PER_PMD	(1UL << PMD_BITS)
+#define PTRS_PER_PGD	(1UL << PGDIR_BITS)
+
+/* Kernel has a separate 44bit address space. */
+#define FIRST_USER_ADDRESS	0
+
+#define pte_ERROR(e)	__builtin_trap()
+#define pmd_ERROR(e)	__builtin_trap()
+#define pgd_ERROR(e)	__builtin_trap()
+
+#endif /* !(__ASSEMBLY__) */
+
+/* PTE bits which are the same in SUN4U and SUN4V format.  */
+#define _PAGE_VALID	  _AC(0x8000000000000000,UL) /* Valid TTE            */
+#define _PAGE_R	  	  _AC(0x8000000000000000,UL) /* Keep ref bit uptodate*/
+
+/* SUN4U pte bits... */
+#define _PAGE_SZ4MB_4U	  _AC(0x6000000000000000,UL) /* 4MB Page             */
+#define _PAGE_SZ512K_4U	  _AC(0x4000000000000000,UL) /* 512K Page            */
+#define _PAGE_SZ64K_4U	  _AC(0x2000000000000000,UL) /* 64K Page             */
+#define _PAGE_SZ8K_4U	  _AC(0x0000000000000000,UL) /* 8K Page              */
+#define _PAGE_NFO_4U	  _AC(0x1000000000000000,UL) /* No Fault Only        */
+#define _PAGE_IE_4U	  _AC(0x0800000000000000,UL) /* Invert Endianness    */
+#define _PAGE_SOFT2_4U	  _AC(0x07FC000000000000,UL) /* Software bits, set 2 */
+#define _PAGE_RES1_4U	  _AC(0x0002000000000000,UL) /* Reserved             */
+#define _PAGE_SZ32MB_4U	  _AC(0x0001000000000000,UL) /* (Panther) 32MB page  */
+#define _PAGE_SZ256MB_4U  _AC(0x2001000000000000,UL) /* (Panther) 256MB page */
+#define _PAGE_SZALL_4U	  _AC(0x6001000000000000,UL) /* All pgsz bits        */
+#define _PAGE_SN_4U	  _AC(0x0000800000000000,UL) /* (Cheetah) Snoop      */
+#define _PAGE_RES2_4U	  _AC(0x0000780000000000,UL) /* Reserved             */
+#define _PAGE_PADDR_4U	  _AC(0x000007FFFFFFE000,UL) /* (Cheetah) pa[42:13]  */
+#define _PAGE_SOFT_4U	  _AC(0x0000000000001F80,UL) /* Software bits:       */
+#define _PAGE_EXEC_4U	  _AC(0x0000000000001000,UL) /* Executable SW bit    */
+#define _PAGE_MODIFIED_4U _AC(0x0000000000000800,UL) /* Modified (dirty)     */
+#define _PAGE_FILE_4U	  _AC(0x0000000000000800,UL) /* Pagecache page       */
+#define _PAGE_ACCESSED_4U _AC(0x0000000000000400,UL) /* Accessed (ref'd)     */
+#define _PAGE_READ_4U	  _AC(0x0000000000000200,UL) /* Readable SW Bit      */
+#define _PAGE_WRITE_4U	  _AC(0x0000000000000100,UL) /* Writable SW Bit      */
+#define _PAGE_PRESENT_4U  _AC(0x0000000000000080,UL) /* Present              */
+#define _PAGE_L_4U	  _AC(0x0000000000000040,UL) /* Locked TTE           */
+#define _PAGE_CP_4U	  _AC(0x0000000000000020,UL) /* Cacheable in P-Cache */
+#define _PAGE_CV_4U	  _AC(0x0000000000000010,UL) /* Cacheable in V-Cache */
+#define _PAGE_E_4U	  _AC(0x0000000000000008,UL) /* side-Effect          */
+#define _PAGE_P_4U	  _AC(0x0000000000000004,UL) /* Privileged Page      */
+#define _PAGE_W_4U	  _AC(0x0000000000000002,UL) /* Writable             */
+
+/* SUN4V pte bits... */
+#define _PAGE_NFO_4V	  _AC(0x4000000000000000,UL) /* No Fault Only        */
+#define _PAGE_SOFT2_4V	  _AC(0x3F00000000000000,UL) /* Software bits, set 2 */
+#define _PAGE_MODIFIED_4V _AC(0x2000000000000000,UL) /* Modified (dirty)     */
+#define _PAGE_ACCESSED_4V _AC(0x1000000000000000,UL) /* Accessed (ref'd)     */
+#define _PAGE_READ_4V	  _AC(0x0800000000000000,UL) /* Readable SW Bit      */
+#define _PAGE_WRITE_4V	  _AC(0x0400000000000000,UL) /* Writable SW Bit      */
+#define _PAGE_PADDR_4V	  _AC(0x00FFFFFFFFFFE000,UL) /* paddr[55:13]         */
+#define _PAGE_IE_4V	  _AC(0x0000000000001000,UL) /* Invert Endianness    */
+#define _PAGE_E_4V	  _AC(0x0000000000000800,UL) /* side-Effect          */
+#define _PAGE_CP_4V	  _AC(0x0000000000000400,UL) /* Cacheable in P-Cache */
+#define _PAGE_CV_4V	  _AC(0x0000000000000200,UL) /* Cacheable in V-Cache */
+#define _PAGE_P_4V	  _AC(0x0000000000000100,UL) /* Privileged Page      */
+#define _PAGE_EXEC_4V	  _AC(0x0000000000000080,UL) /* Executable Page      */
+#define _PAGE_W_4V	  _AC(0x0000000000000040,UL) /* Writable             */
+#define _PAGE_SOFT_4V	  _AC(0x0000000000000030,UL) /* Software bits        */
+#define _PAGE_FILE_4V	  _AC(0x0000000000000020,UL) /* Pagecache page       */
+#define _PAGE_PRESENT_4V  _AC(0x0000000000000010,UL) /* Present              */
+#define _PAGE_RESV_4V	  _AC(0x0000000000000008,UL) /* Reserved             */
+#define _PAGE_SZ16GB_4V	  _AC(0x0000000000000007,UL) /* 16GB Page            */
+#define _PAGE_SZ2GB_4V	  _AC(0x0000000000000006,UL) /* 2GB Page             */
+#define _PAGE_SZ256MB_4V  _AC(0x0000000000000005,UL) /* 256MB Page           */
+#define _PAGE_SZ32MB_4V	  _AC(0x0000000000000004,UL) /* 32MB Page            */
+#define _PAGE_SZ4MB_4V	  _AC(0x0000000000000003,UL) /* 4MB Page             */
+#define _PAGE_SZ512K_4V	  _AC(0x0000000000000002,UL) /* 512K Page            */
+#define _PAGE_SZ64K_4V	  _AC(0x0000000000000001,UL) /* 64K Page             */
+#define _PAGE_SZ8K_4V	  _AC(0x0000000000000000,UL) /* 8K Page              */
+#define _PAGE_SZALL_4V	  _AC(0x0000000000000007,UL) /* All pgsz bits        */
+
+#if PAGE_SHIFT == 13
+#define _PAGE_SZBITS_4U	_PAGE_SZ8K_4U
+#define _PAGE_SZBITS_4V	_PAGE_SZ8K_4V
+#elif PAGE_SHIFT == 16
+#define _PAGE_SZBITS_4U	_PAGE_SZ64K_4U
+#define _PAGE_SZBITS_4V	_PAGE_SZ64K_4V
+#else
+#error Wrong PAGE_SHIFT specified
+#endif
+
+#if defined(CONFIG_HUGETLB_PAGE_SIZE_4MB)
+#define _PAGE_SZHUGE_4U	_PAGE_SZ4MB_4U
+#define _PAGE_SZHUGE_4V	_PAGE_SZ4MB_4V
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512K)
+#define _PAGE_SZHUGE_4U	_PAGE_SZ512K_4U
+#define _PAGE_SZHUGE_4V	_PAGE_SZ512K_4V
+#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64K)
+#define _PAGE_SZHUGE_4U	_PAGE_SZ64K_4U
+#define _PAGE_SZHUGE_4V	_PAGE_SZ64K_4V
+#endif
+
+/* These are actually filled in at boot time by sun4{u,v}_pgprot_init() */
+#define __P000	__pgprot(0)
+#define __P001	__pgprot(0)
+#define __P010	__pgprot(0)
+#define __P011	__pgprot(0)
+#define __P100	__pgprot(0)
+#define __P101	__pgprot(0)
+#define __P110	__pgprot(0)
+#define __P111	__pgprot(0)
+
+#define __S000	__pgprot(0)
+#define __S001	__pgprot(0)
+#define __S010	__pgprot(0)
+#define __S011	__pgprot(0)
+#define __S100	__pgprot(0)
+#define __S101	__pgprot(0)
+#define __S110	__pgprot(0)
+#define __S111	__pgprot(0)
+
+#ifndef __ASSEMBLY__
+
+extern pte_t mk_pte_io(unsigned long, pgprot_t, int, unsigned long);
+
+extern unsigned long pte_sz_bits(unsigned long size);
+
+extern pgprot_t PAGE_KERNEL;
+extern pgprot_t PAGE_KERNEL_LOCKED;
+extern pgprot_t PAGE_COPY;
+extern pgprot_t PAGE_SHARED;
+
+/* XXX This uglyness is for the atyfb driver's sparc mmap() support. XXX */
+extern unsigned long _PAGE_IE;
+extern unsigned long _PAGE_E;
+extern unsigned long _PAGE_CACHE;
+
+extern unsigned long pg_iobits;
+extern unsigned long _PAGE_ALL_SZ_BITS;
+extern unsigned long _PAGE_SZBITS;
+
+extern struct page *mem_map_zero;
+#define ZERO_PAGE(vaddr)	(mem_map_zero)
+
+/* PFNs are real physical page numbers.  However, mem_map only begins to record
+ * per-page information starting at pfn_base.  This is to handle systems where
+ * the first physical page in the machine is at some huge physical address,
+ * such as 4GB.   This is common on a partitioned E10000, for example.
+ */
+static inline pte_t pfn_pte(unsigned long pfn, pgprot_t prot)
+{
+	unsigned long paddr = pfn << PAGE_SHIFT;
+	unsigned long sz_bits;
+
+	sz_bits = 0UL;
+	if (_PAGE_SZBITS_4U != 0UL || _PAGE_SZBITS_4V != 0UL) {
+		__asm__ __volatile__(
+		"\n661:	sethi		%%uhi(%1), %0\n"
+		"	sllx		%0, 32, %0\n"
+		"	.section	.sun4v_2insn_patch, \"ax\"\n"
+		"	.word		661b\n"
+		"	mov		%2, %0\n"
+		"	nop\n"
+		"	.previous\n"
+		: "=r" (sz_bits)
+		: "i" (_PAGE_SZBITS_4U), "i" (_PAGE_SZBITS_4V));
+	}
+	return __pte(paddr | sz_bits | pgprot_val(prot));
+}
+#define mk_pte(page, pgprot)	pfn_pte(page_to_pfn(page), (pgprot))
+
+/* This one can be done with two shifts.  */
+static inline unsigned long pte_pfn(pte_t pte)
+{
+	unsigned long ret;
+
+	__asm__ __volatile__(
+	"\n661:	sllx		%1, %2, %0\n"
+	"	srlx		%0, %3, %0\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sllx		%1, %4, %0\n"
+	"	srlx		%0, %5, %0\n"
+	"	.previous\n"
+	: "=r" (ret)
+	: "r" (pte_val(pte)),
+	  "i" (21), "i" (21 + PAGE_SHIFT),
+	  "i" (8), "i" (8 + PAGE_SHIFT));
+
+	return ret;
+}
+#define pte_page(x) pfn_to_page(pte_pfn(x))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t prot)
+{
+	unsigned long mask, tmp;
+
+	/* SUN4U: 0x600307ffffffecb8 (negated == 0x9ffcf80000001347)
+	 * SUN4V: 0x30ffffffffffee17 (negated == 0xcf000000000011e8)
+	 *
+	 * Even if we use negation tricks the result is still a 6
+	 * instruction sequence, so don't try to play fancy and just
+	 * do the most straightforward implementation.
+	 *
+	 * Note: We encode this into 3 sun4v 2-insn patch sequences.
+	 */
+
+	__asm__ __volatile__(
+	"\n661:	sethi		%%uhi(%2), %1\n"
+	"	sethi		%%hi(%2), %0\n"
+	"\n662:	or		%1, %%ulo(%2), %1\n"
+	"	or		%0, %%lo(%2), %0\n"
+	"\n663:	sllx		%1, 32, %1\n"
+	"	or		%0, %1, %0\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%3), %1\n"
+	"	sethi		%%hi(%3), %0\n"
+	"	.word		662b\n"
+	"	or		%1, %%ulo(%3), %1\n"
+	"	or		%0, %%lo(%3), %0\n"
+	"	.word		663b\n"
+	"	sllx		%1, 32, %1\n"
+	"	or		%0, %1, %0\n"
+	"	.previous\n"
+	: "=r" (mask), "=r" (tmp)
+	: "i" (_PAGE_PADDR_4U | _PAGE_MODIFIED_4U | _PAGE_ACCESSED_4U |
+	       _PAGE_CP_4U | _PAGE_CV_4U | _PAGE_E_4U | _PAGE_PRESENT_4U |
+	       _PAGE_SZBITS_4U),
+	  "i" (_PAGE_PADDR_4V | _PAGE_MODIFIED_4V | _PAGE_ACCESSED_4V |
+	       _PAGE_CP_4V | _PAGE_CV_4V | _PAGE_E_4V | _PAGE_PRESENT_4V |
+	       _PAGE_SZBITS_4V));
+
+	return __pte((pte_val(pte) & mask) | (pgprot_val(prot) & ~mask));
+}
+
+static inline pte_t pgoff_to_pte(unsigned long off)
+{
+	off <<= PAGE_SHIFT;
+
+	__asm__ __volatile__(
+	"\n661:	or		%0, %2, %0\n"
+	"	.section	.sun4v_1insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	or		%0, %3, %0\n"
+	"	.previous\n"
+	: "=r" (off)
+	: "0" (off), "i" (_PAGE_FILE_4U), "i" (_PAGE_FILE_4V));
+
+	return __pte(off);
+}
+
+static inline pgprot_t pgprot_noncached(pgprot_t prot)
+{
+	unsigned long val = pgprot_val(prot);
+
+	__asm__ __volatile__(
+	"\n661:	andn		%0, %2, %0\n"
+	"	or		%0, %3, %0\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	andn		%0, %4, %0\n"
+	"	or		%0, %5, %0\n"
+	"	.previous\n"
+	: "=r" (val)
+	: "0" (val), "i" (_PAGE_CP_4U | _PAGE_CV_4U), "i" (_PAGE_E_4U),
+	             "i" (_PAGE_CP_4V | _PAGE_CV_4V), "i" (_PAGE_E_4V));
+
+	return __pgprot(val);
+}
+/* Various pieces of code check for platform support by ifdef testing
+ * on "pgprot_noncached".  That's broken and should be fixed, but for
+ * now...
+ */
+#define pgprot_noncached pgprot_noncached
+
+#ifdef CONFIG_HUGETLB_PAGE
+static inline pte_t pte_mkhuge(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	sethi		%%uhi(%1), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	mov		%2, %0\n"
+	"	nop\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_SZHUGE_4U), "i" (_PAGE_SZHUGE_4V));
+
+	return __pte(pte_val(pte) | mask);
+}
+#endif
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+	unsigned long val = pte_val(pte), tmp;
+
+	__asm__ __volatile__(
+	"\n661:	or		%0, %3, %0\n"
+	"	nop\n"
+	"\n662:	nop\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%4), %1\n"
+	"	sllx		%1, 32, %1\n"
+	"	.word		662b\n"
+	"	or		%1, %%lo(%4), %1\n"
+	"	or		%0, %1, %0\n"
+	"	.previous\n"
+	: "=r" (val), "=r" (tmp)
+	: "0" (val), "i" (_PAGE_MODIFIED_4U | _PAGE_W_4U),
+	  "i" (_PAGE_MODIFIED_4V | _PAGE_W_4V));
+
+	return __pte(val);
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+	unsigned long val = pte_val(pte), tmp;
+
+	__asm__ __volatile__(
+	"\n661:	andn		%0, %3, %0\n"
+	"	nop\n"
+	"\n662:	nop\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%4), %1\n"
+	"	sllx		%1, 32, %1\n"
+	"	.word		662b\n"
+	"	or		%1, %%lo(%4), %1\n"
+	"	andn		%0, %1, %0\n"
+	"	.previous\n"
+	: "=r" (val), "=r" (tmp)
+	: "0" (val), "i" (_PAGE_MODIFIED_4U | _PAGE_W_4U),
+	  "i" (_PAGE_MODIFIED_4V | _PAGE_W_4V));
+
+	return __pte(val);
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+	unsigned long val = pte_val(pte), mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_WRITE_4U), "i" (_PAGE_WRITE_4V));
+
+	return __pte(val | mask);
+}
+
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+	unsigned long val = pte_val(pte), tmp;
+
+	__asm__ __volatile__(
+	"\n661:	andn		%0, %3, %0\n"
+	"	nop\n"
+	"\n662:	nop\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%4), %1\n"
+	"	sllx		%1, 32, %1\n"
+	"	.word		662b\n"
+	"	or		%1, %%lo(%4), %1\n"
+	"	andn		%0, %1, %0\n"
+	"	.previous\n"
+	: "=r" (val), "=r" (tmp)
+	: "0" (val), "i" (_PAGE_WRITE_4U | _PAGE_W_4U),
+	  "i" (_PAGE_WRITE_4V | _PAGE_W_4V));
+
+	return __pte(val);
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V));
+
+	mask |= _PAGE_R;
+
+	return __pte(pte_val(pte) & ~mask);
+}
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V));
+
+	mask |= _PAGE_R;
+
+	return __pte(pte_val(pte) | mask);
+}
+
+static inline pte_t pte_mkspecial(pte_t pte)
+{
+	return pte;
+}
+
+static inline unsigned long pte_young(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_ACCESSED_4U), "i" (_PAGE_ACCESSED_4V));
+
+	return (pte_val(pte) & mask);
+}
+
+static inline unsigned long pte_dirty(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_MODIFIED_4U), "i" (_PAGE_MODIFIED_4V));
+
+	return (pte_val(pte) & mask);
+}
+
+static inline unsigned long pte_write(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	mov		%1, %0\n"
+	"	nop\n"
+	"	.section	.sun4v_2insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	sethi		%%uhi(%2), %0\n"
+	"	sllx		%0, 32, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_WRITE_4U), "i" (_PAGE_WRITE_4V));
+
+	return (pte_val(pte) & mask);
+}
+
+static inline unsigned long pte_exec(pte_t pte)
+{
+	unsigned long mask;
+
+	__asm__ __volatile__(
+	"\n661:	sethi		%%hi(%1), %0\n"
+	"	.section	.sun4v_1insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	mov		%2, %0\n"
+	"	.previous\n"
+	: "=r" (mask)
+	: "i" (_PAGE_EXEC_4U), "i" (_PAGE_EXEC_4V));
+
+	return (pte_val(pte) & mask);
+}
+
+static inline unsigned long pte_file(pte_t pte)
+{
+	unsigned long val = pte_val(pte);
+
+	__asm__ __volatile__(
+	"\n661:	and		%0, %2, %0\n"
+	"	.section	.sun4v_1insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	and		%0, %3, %0\n"
+	"	.previous\n"
+	: "=r" (val)
+	: "0" (val), "i" (_PAGE_FILE_4U), "i" (_PAGE_FILE_4V));
+
+	return val;
+}
+
+static inline unsigned long pte_present(pte_t pte)
+{
+	unsigned long val = pte_val(pte);
+
+	__asm__ __volatile__(
+	"\n661:	and		%0, %2, %0\n"
+	"	.section	.sun4v_1insn_patch, \"ax\"\n"
+	"	.word		661b\n"
+	"	and		%0, %3, %0\n"
+	"	.previous\n"
+	: "=r" (val)
+	: "0" (val), "i" (_PAGE_PRESENT_4U), "i" (_PAGE_PRESENT_4V));
+
+	return val;
+}
+
+static inline int pte_special(pte_t pte)
+{
+	return 0;
+}
+
+#define pmd_set(pmdp, ptep)	\
+	(pmd_val(*(pmdp)) = (__pa((unsigned long) (ptep)) >> 11UL))
+#define pud_set(pudp, pmdp)	\
+	(pud_val(*(pudp)) = (__pa((unsigned long) (pmdp)) >> 11UL))
+#define __pmd_page(pmd)		\
+	((unsigned long) __va((((unsigned long)pmd_val(pmd))<<11UL)))
+#define pmd_page(pmd) 			virt_to_page((void *)__pmd_page(pmd))
+#define pud_page_vaddr(pud)		\
+	((unsigned long) __va((((unsigned long)pud_val(pud))<<11UL)))
+#define pud_page(pud) 			virt_to_page((void *)pud_page_vaddr(pud))
+#define pmd_none(pmd)			(!pmd_val(pmd))
+#define pmd_bad(pmd)			(0)
+#define pmd_present(pmd)		(pmd_val(pmd) != 0U)
+#define pmd_clear(pmdp)			(pmd_val(*(pmdp)) = 0U)
+#define pud_none(pud)			(!pud_val(pud))
+#define pud_bad(pud)			(0)
+#define pud_present(pud)		(pud_val(pud) != 0U)
+#define pud_clear(pudp)			(pud_val(*(pudp)) = 0U)
+
+/* Same in both SUN4V and SUN4U.  */
+#define pte_none(pte) 			(!pte_val(pte))
+
+/* to find an entry in a page-table-directory. */
+#define pgd_index(address)	(((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+#define pgd_offset(mm, address)	((mm)->pgd + pgd_index(address))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level page table.. */
+#define pmd_offset(pudp, address)	\
+	((pmd_t *) pud_page_vaddr(*(pudp)) + \
+	 (((address) >> PMD_SHIFT) & (PTRS_PER_PMD-1)))
+
+/* Find an entry in the third-level page table.. */
+#define pte_index(dir, address)	\
+	((pte_t *) __pmd_page(*(dir)) + \
+	 ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
+#define pte_offset_kernel		pte_index
+#define pte_offset_map			pte_index
+#define pte_offset_map_nested		pte_index
+#define pte_unmap(pte)			do { } while (0)
+#define pte_unmap_nested(pte)		do { } while (0)
+
+/* Actual page table PTE updates.  */
+extern void tlb_batch_add(struct mm_struct *mm, unsigned long vaddr, pte_t *ptep, pte_t orig);
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
+{
+	pte_t orig = *ptep;
+
+	*ptep = pte;
+
+	/* It is more efficient to let flush_tlb_kernel_range()
+	 * handle init_mm tlb flushes.
+	 *
+	 * SUN4V NOTE: _PAGE_VALID is the same value in both the SUN4U
+	 *             and SUN4V pte layout, so this inline test is fine.
+	 */
+	if (likely(mm != &init_mm) && (pte_val(orig) & _PAGE_VALID))
+		tlb_batch_add(mm, addr, ptep, orig);
+}
+
+#define pte_clear(mm,addr,ptep)		\
+	set_pte_at((mm), (addr), (ptep), __pte(0UL))
+
+#ifdef DCACHE_ALIASING_POSSIBLE
+#define __HAVE_ARCH_MOVE_PTE
+#define move_pte(pte, prot, old_addr, new_addr)				\
+({									\
+	pte_t newpte = (pte);						\
+	if (tlb_type != hypervisor && pte_present(pte)) {		\
+		unsigned long this_pfn = pte_pfn(pte);			\
+									\
+		if (pfn_valid(this_pfn) &&				\
+		    (((old_addr) ^ (new_addr)) & (1 << 13)))		\
+			flush_dcache_page_all(current->mm,		\
+					      pfn_to_page(this_pfn));	\
+	}								\
+	newpte;								\
+})
+#endif
+
+extern pgd_t swapper_pg_dir[2048];
+extern pmd_t swapper_low_pmd_dir[2048];
+
+extern void paging_init(void);
+extern unsigned long find_ecache_flush_span(unsigned long size);
+
+/* These do nothing with the way I have things setup. */
+#define mmu_lockarea(vaddr, len)		(vaddr)
+#define mmu_unlockarea(vaddr, len)		do { } while(0)
+
+struct vm_area_struct;
+extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t);
+
+/* Encode and de-code a swap entry */
+#define __swp_type(entry)	(((entry).val >> PAGE_SHIFT) & 0xffUL)
+#define __swp_offset(entry)	((entry).val >> (PAGE_SHIFT + 8UL))
+#define __swp_entry(type, offset)	\
+	( (swp_entry_t) \
+	  { \
+		(((long)(type) << PAGE_SHIFT) | \
+                 ((long)(offset) << (PAGE_SHIFT + 8UL))) \
+	  } )
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+/* File offset in PTE support. */
+extern unsigned long pte_file(pte_t);
+#define pte_to_pgoff(pte)	(pte_val(pte) >> PAGE_SHIFT)
+extern pte_t pgoff_to_pte(unsigned long);
+#define PTE_FILE_MAX_BITS	(64UL - PAGE_SHIFT - 1UL)
+
+extern unsigned long *sparc64_valid_addr_bitmap;
+
+/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
+#define kern_addr_valid(addr)	\
+	(test_bit(__pa((unsigned long)(addr))>>22, sparc64_valid_addr_bitmap))
+
+extern int page_in_phys_avail(unsigned long paddr);
+
+extern int io_remap_pfn_range(struct vm_area_struct *vma, unsigned long from,
+			       unsigned long pfn,
+			       unsigned long size, pgprot_t prot);
+
+/*
+ * For sparc32&64, the pfn in io_remap_pfn_range() carries <iospace> in
+ * its high 4 bits.  These macros/functions put it there or get it from there.
+ */
+#define MK_IOSPACE_PFN(space, pfn)	(pfn | (space << (BITS_PER_LONG - 4)))
+#define GET_IOSPACE(pfn)		(pfn >> (BITS_PER_LONG - 4))
+#define GET_PFN(pfn)			(pfn & 0x0fffffffffffffffUL)
+
+#include <asm-generic/pgtable.h>
+
+/* We provide our own get_unmapped_area to cope with VA holes and
+ * SHM area cache aliasing for userland.
+ */
+#define HAVE_ARCH_UNMAPPED_AREA
+#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN
+
+/* We provide a special get_unmapped_area for framebuffer mmaps to try and use
+ * the largest alignment possible such that larget PTEs can be used.
+ */
+extern unsigned long get_fb_unmapped_area(struct file *filp, unsigned long,
+					  unsigned long, unsigned long,
+					  unsigned long);
+#define HAVE_ARCH_FB_UNMAPPED_AREA
+
+extern void pgtable_cache_init(void);
+extern void sun4v_register_fault_status(void);
+extern void sun4v_ktsb_register(void);
+extern void __init cheetah_ecache_flush_init(void);
+extern void sun4v_patch_tlb_handlers(void);
+
+extern unsigned long cmdline_memory_size;
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC64_PGTABLE_H) */
diff --git a/arch/sparc/include/asm/pgtsrmmu.h b/arch/sparc/include/asm/pgtsrmmu.h
new file mode 100644
index 000000000000..808555fc1d58
--- /dev/null
+++ b/arch/sparc/include/asm/pgtsrmmu.h
@@ -0,0 +1,298 @@
+/*
+ * pgtsrmmu.h:  SRMMU page table defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_PGTSRMMU_H
+#define _SPARC_PGTSRMMU_H
+
+#include <asm/page.h>
+
+#ifdef __ASSEMBLY__
+#include <asm/thread_info.h>	/* TI_UWINMASK for WINDOW_FLUSH */
+#endif
+
+/* Number of contexts is implementation-dependent; 64k is the most we support */
+#define SRMMU_MAX_CONTEXTS	65536
+
+/* PMD_SHIFT determines the size of the area a second-level page table entry can map */
+#define SRMMU_REAL_PMD_SHIFT		18
+#define SRMMU_REAL_PMD_SIZE		(1UL << SRMMU_REAL_PMD_SHIFT)
+#define SRMMU_REAL_PMD_MASK		(~(SRMMU_REAL_PMD_SIZE-1))
+#define SRMMU_REAL_PMD_ALIGN(__addr)	(((__addr)+SRMMU_REAL_PMD_SIZE-1)&SRMMU_REAL_PMD_MASK)
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SRMMU_PGDIR_SHIFT       24
+#define SRMMU_PGDIR_SIZE        (1UL << SRMMU_PGDIR_SHIFT)
+#define SRMMU_PGDIR_MASK        (~(SRMMU_PGDIR_SIZE-1))
+#define SRMMU_PGDIR_ALIGN(addr) (((addr)+SRMMU_PGDIR_SIZE-1)&SRMMU_PGDIR_MASK)
+
+#define SRMMU_REAL_PTRS_PER_PTE	64
+#define SRMMU_REAL_PTRS_PER_PMD	64
+#define SRMMU_PTRS_PER_PGD	256
+
+#define SRMMU_REAL_PTE_TABLE_SIZE	(SRMMU_REAL_PTRS_PER_PTE*4)
+#define SRMMU_PMD_TABLE_SIZE		(SRMMU_REAL_PTRS_PER_PMD*4)
+#define SRMMU_PGD_TABLE_SIZE		(SRMMU_PTRS_PER_PGD*4)
+
+/*
+ * To support pagetables in highmem, Linux introduces APIs which
+ * return struct page* and generally manipulate page tables when
+ * they are not mapped into kernel space. Our hardware page tables
+ * are smaller than pages. We lump hardware tabes into big, page sized
+ * software tables.
+ *
+ * PMD_SHIFT determines the size of the area a second-level page table entry
+ * can map, and our pmd_t is 16 times larger than normal.  The values which
+ * were once defined here are now generic for 4c and srmmu, so they're
+ * found in pgtable.h.
+ */
+#define SRMMU_PTRS_PER_PMD	4
+
+/* Definition of the values in the ET field of PTD's and PTE's */
+#define SRMMU_ET_MASK         0x3
+#define SRMMU_ET_INVALID      0x0
+#define SRMMU_ET_PTD          0x1
+#define SRMMU_ET_PTE          0x2
+#define SRMMU_ET_REPTE        0x3 /* AIEEE, SuperSparc II reverse endian page! */
+
+/* Physical page extraction from PTP's and PTE's. */
+#define SRMMU_CTX_PMASK    0xfffffff0
+#define SRMMU_PTD_PMASK    0xfffffff0
+#define SRMMU_PTE_PMASK    0xffffff00
+
+/* The pte non-page bits.  Some notes:
+ * 1) cache, dirty, valid, and ref are frobbable
+ *    for both supervisor and user pages.
+ * 2) exec and write will only give the desired effect
+ *    on user pages
+ * 3) use priv and priv_readonly for changing the
+ *    characteristics of supervisor ptes
+ */
+#define SRMMU_CACHE        0x80
+#define SRMMU_DIRTY        0x40
+#define SRMMU_REF          0x20
+#define SRMMU_NOREAD       0x10
+#define SRMMU_EXEC         0x08
+#define SRMMU_WRITE        0x04
+#define SRMMU_VALID        0x02 /* SRMMU_ET_PTE */
+#define SRMMU_PRIV         0x1c
+#define SRMMU_PRIV_RDONLY  0x18
+
+#define SRMMU_FILE         0x40	/* Implemented in software */
+
+#define SRMMU_PTE_FILE_SHIFT     8	/* == 32-PTE_FILE_MAX_BITS */
+
+#define SRMMU_CHG_MASK    (0xffffff00 | SRMMU_REF | SRMMU_DIRTY)
+
+/* SRMMU swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * oooooooooooooooooootttttRRRRRRRR
+ * fedcba9876543210fedcba9876543210
+ *
+ * The bottom 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SRMMU_SWP_TYPE_MASK	0x1f
+#define SRMMU_SWP_TYPE_SHIFT	SRMMU_PTE_FILE_SHIFT
+#define SRMMU_SWP_OFF_MASK	0x7ffff
+#define SRMMU_SWP_OFF_SHIFT	(SRMMU_PTE_FILE_SHIFT + 5)
+
+/* Some day I will implement true fine grained access bits for
+ * user pages because the SRMMU gives us the capabilities to
+ * enforce all the protection levels that vma's can have.
+ * XXX But for now...
+ */
+#define SRMMU_PAGE_NONE    __pgprot(SRMMU_CACHE | \
+				    SRMMU_PRIV | SRMMU_REF)
+#define SRMMU_PAGE_SHARED  __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+				    SRMMU_EXEC | SRMMU_WRITE | SRMMU_REF)
+#define SRMMU_PAGE_COPY    __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+				    SRMMU_EXEC | SRMMU_REF)
+#define SRMMU_PAGE_RDONLY  __pgprot(SRMMU_VALID | SRMMU_CACHE | \
+				    SRMMU_EXEC | SRMMU_REF)
+#define SRMMU_PAGE_KERNEL  __pgprot(SRMMU_VALID | SRMMU_CACHE | SRMMU_PRIV | \
+				    SRMMU_DIRTY | SRMMU_REF)
+
+/* SRMMU Register addresses in ASI 0x4.  These are valid for all
+ * current SRMMU implementations that exist.
+ */
+#define SRMMU_CTRL_REG           0x00000000
+#define SRMMU_CTXTBL_PTR         0x00000100
+#define SRMMU_CTX_REG            0x00000200
+#define SRMMU_FAULT_STATUS       0x00000300
+#define SRMMU_FAULT_ADDR         0x00000400
+
+#define WINDOW_FLUSH(tmp1, tmp2)					\
+	mov	0, tmp1;						\
+98:	ld	[%g6 + TI_UWINMASK], tmp2;				\
+	orcc	%g0, tmp2, %g0;						\
+	add	tmp1, 1, tmp1;						\
+	bne	98b;							\
+	 save	%sp, -64, %sp;						\
+99:	subcc	tmp1, 1, tmp1;						\
+	bne	99b;							\
+	 restore %g0, %g0, %g0;
+
+#ifndef __ASSEMBLY__
+
+/* This makes sense. Honest it does - Anton */
+/* XXX Yes but it's ugly as sin.  FIXME. -KMW */
+extern void *srmmu_nocache_pool;
+#define __nocache_pa(VADDR) (((unsigned long)VADDR) - SRMMU_NOCACHE_VADDR + __pa((unsigned long)srmmu_nocache_pool))
+#define __nocache_va(PADDR) (__va((unsigned long)PADDR) - (unsigned long)srmmu_nocache_pool + SRMMU_NOCACHE_VADDR)
+#define __nocache_fix(VADDR) __va(__nocache_pa(VADDR))
+
+/* Accessing the MMU control register. */
+static inline unsigned int srmmu_get_mmureg(void)
+{
+        unsigned int retval;
+	__asm__ __volatile__("lda [%%g0] %1, %0\n\t" :
+			     "=r" (retval) :
+			     "i" (ASI_M_MMUREGS));
+	return retval;
+}
+
+static inline void srmmu_set_mmureg(unsigned long regval)
+{
+	__asm__ __volatile__("sta %0, [%%g0] %1\n\t" : :
+			     "r" (regval), "i" (ASI_M_MMUREGS) : "memory");
+
+}
+
+static inline void srmmu_set_ctable_ptr(unsigned long paddr)
+{
+	paddr = ((paddr >> 4) & SRMMU_CTX_PMASK);
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+			     "r" (paddr), "r" (SRMMU_CTXTBL_PTR),
+			     "i" (ASI_M_MMUREGS) :
+			     "memory");
+}
+
+static inline unsigned long srmmu_get_ctable_ptr(void)
+{
+	unsigned int retval;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (SRMMU_CTXTBL_PTR),
+			     "i" (ASI_M_MMUREGS));
+	return (retval & SRMMU_CTX_PMASK) << 4;
+}
+
+static inline void srmmu_set_context(int context)
+{
+	__asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+			     "r" (context), "r" (SRMMU_CTX_REG),
+			     "i" (ASI_M_MMUREGS) : "memory");
+}
+
+static inline int srmmu_get_context(void)
+{
+	register int retval;
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (SRMMU_CTX_REG),
+			     "i" (ASI_M_MMUREGS));
+	return retval;
+}
+
+static inline unsigned int srmmu_get_fstatus(void)
+{
+	unsigned int retval;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (SRMMU_FAULT_STATUS), "i" (ASI_M_MMUREGS));
+	return retval;
+}
+
+static inline unsigned int srmmu_get_faddr(void)
+{
+	unsigned int retval;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (SRMMU_FAULT_ADDR), "i" (ASI_M_MMUREGS));
+	return retval;
+}
+
+/* This is guaranteed on all SRMMU's. */
+static inline void srmmu_flush_whole_tlb(void)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (0x400),        /* Flush entire TLB!! */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+/* These flush types are not available on all chips... */
+static inline void srmmu_flush_tlb_ctx(void)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (0x300),        /* Flush TLB ctx.. */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+static inline void srmmu_flush_tlb_region(unsigned long addr)
+{
+	addr &= SRMMU_PGDIR_MASK;
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (addr | 0x200), /* Flush TLB region.. */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+
+static inline void srmmu_flush_tlb_segment(unsigned long addr)
+{
+	addr &= SRMMU_REAL_PMD_MASK;
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (addr | 0x100), /* Flush TLB segment.. */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+static inline void srmmu_flush_tlb_page(unsigned long page)
+{
+	page &= PAGE_MASK;
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t": :
+			     "r" (page),        /* Flush TLB page.. */
+			     "i" (ASI_M_FLUSH_PROBE) : "memory");
+
+}
+
+static inline unsigned long srmmu_hwprobe(unsigned long vaddr)
+{
+	unsigned long retval;
+
+	vaddr &= PAGE_MASK;
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (retval) :
+			     "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE));
+
+	return retval;
+}
+
+static inline int
+srmmu_get_pte (unsigned long addr)
+{
+	register unsigned long entry;
+        
+	__asm__ __volatile__("\n\tlda [%1] %2,%0\n\t" :
+				"=r" (entry):
+				"r" ((addr & 0xfffff000) | 0x400), "i" (ASI_M_FLUSH_PROBE));
+	return entry;
+}
+
+extern unsigned long (*srmmu_read_physical)(unsigned long paddr);
+extern void (*srmmu_write_physical)(unsigned long paddr, unsigned long word);
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSRMMU_H) */
diff --git a/arch/sparc/include/asm/pgtsun4.h b/arch/sparc/include/asm/pgtsun4.h
new file mode 100644
index 000000000000..5a0d661fb82e
--- /dev/null
+++ b/arch/sparc/include/asm/pgtsun4.h
@@ -0,0 +1,171 @@
+/*
+ * pgtsun4.h:  Sun4 specific pgtable.h defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_PGTSUN4C_H
+#define _SPARC_PGTSUN4C_H
+
+#include <asm/contregs.h>
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define SUN4C_PMD_SHIFT       23
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SUN4C_PGDIR_SHIFT       23
+#define SUN4C_PGDIR_SIZE        (1UL << SUN4C_PGDIR_SHIFT)
+#define SUN4C_PGDIR_MASK        (~(SUN4C_PGDIR_SIZE-1))
+#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK)
+
+/* To represent how the sun4c mmu really lays things out. */
+#define SUN4C_REAL_PGDIR_SHIFT       18
+#define SUN4C_REAL_PGDIR_SIZE        (1UL << SUN4C_REAL_PGDIR_SHIFT)
+#define SUN4C_REAL_PGDIR_MASK        (~(SUN4C_REAL_PGDIR_SIZE-1))
+#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK)
+
+/* 19 bit PFN on sun4 */
+#define SUN4C_PFN_MASK 0x7ffff
+ 
+/* Don't increase these unless the structures in sun4c.c are fixed */
+#define SUN4C_MAX_SEGMAPS 256
+#define SUN4C_MAX_CONTEXTS 16
+
+/*
+ * To be efficient, and not have to worry about allocating such
+ * a huge pgd, we make the kernel sun4c tables each hold 1024
+ * entries and the pgd similarly just like the i386 tables.
+ */
+#define SUN4C_PTRS_PER_PTE    1024
+#define SUN4C_PTRS_PER_PMD    1
+#define SUN4C_PTRS_PER_PGD    1024
+
+/*
+ * Sparc SUN4C pte fields.
+ */
+#define _SUN4C_PAGE_VALID        0x80000000
+#define _SUN4C_PAGE_SILENT_READ  0x80000000   /* synonym */
+#define _SUN4C_PAGE_DIRTY        0x40000000
+#define _SUN4C_PAGE_SILENT_WRITE 0x40000000   /* synonym */
+#define _SUN4C_PAGE_PRIV         0x20000000   /* privileged page */
+#define _SUN4C_PAGE_NOCACHE      0x10000000   /* non-cacheable page */
+#define _SUN4C_PAGE_PRESENT      0x08000000   /* implemented in software */
+#define _SUN4C_PAGE_IO           0x04000000   /* I/O page */
+#define _SUN4C_PAGE_FILE         0x02000000   /* implemented in software */
+#define _SUN4C_PAGE_READ         0x00800000   /* implemented in software */
+#define _SUN4C_PAGE_WRITE        0x00400000   /* implemented in software */
+#define _SUN4C_PAGE_ACCESSED     0x00200000   /* implemented in software */
+#define _SUN4C_PAGE_MODIFIED     0x00100000   /* implemented in software */
+
+#define _SUN4C_READABLE		(_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\
+				 _SUN4C_PAGE_ACCESSED)
+#define _SUN4C_WRITEABLE	(_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\
+				 _SUN4C_PAGE_MODIFIED)
+
+#define _SUN4C_PAGE_CHG_MASK	(0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED)
+
+#define SUN4C_PAGE_NONE		__pgprot(_SUN4C_PAGE_PRESENT)
+#define SUN4C_PAGE_SHARED	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\
+					 _SUN4C_PAGE_WRITE)
+#define SUN4C_PAGE_COPY		__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_READONLY	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_KERNEL	__pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\
+					 _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV)
+
+/* SUN4C swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * RRRRRRRRooooooooooooooooooottttt
+ * fedcba9876543210fedcba9876543210
+ *
+ * The top 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SUN4C_SWP_TYPE_MASK	0x1f
+#define SUN4C_SWP_OFF_MASK	0x7ffff
+#define SUN4C_SWP_OFF_SHIFT	5
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long sun4c_get_synchronous_error(void)
+{
+	unsigned long sync_err;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (sync_err) :
+			     "r" (AC_SYNC_ERR), "i" (ASI_CONTROL));
+	return sync_err;
+}
+
+static inline unsigned long sun4c_get_synchronous_address(void)
+{
+	unsigned long sync_addr;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (sync_addr) :
+			     "r" (AC_SYNC_VA), "i" (ASI_CONTROL));
+	return sync_addr;
+}
+
+/* SUN4 pte, segmap, and context manipulation */
+static inline unsigned long sun4c_get_segmap(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlduha [%1] %2, %0\n\t" : 
+		       "=r" (entry) :
+		       "r" (addr), "i" (ASI_SEGMAP));
+  return entry;
+}
+
+static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry)
+{
+  __asm__ __volatile__("\n\tstha %1, [%0] %2; nop; nop; nop;\n\t" : :
+		       "r" (addr), "r" (entry),
+		       "i" (ASI_SEGMAP)
+		       : "memory");
+}
+
+static inline unsigned long sun4c_get_pte(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : 
+		       "=r" (entry) :
+		       "r" (addr), "i" (ASI_PTE));
+  return entry;
+}
+
+static inline void sun4c_put_pte(unsigned long addr, unsigned long entry)
+{
+  __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : :
+		       "r" (addr), 
+		       "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE)
+		       : "memory");
+}
+
+static inline int sun4c_get_context(void)
+{
+  register int ctx;
+
+  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" :
+		       "=r" (ctx) :
+		       "r" (AC_CONTEXT), "i" (ASI_CONTROL));
+
+  return ctx;
+}
+
+static inline int sun4c_set_context(int ctx)
+{
+  __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : :
+		       "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL)
+		       : "memory");
+
+  return ctx;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSUN4_H) */
diff --git a/arch/sparc/include/asm/pgtsun4c.h b/arch/sparc/include/asm/pgtsun4c.h
new file mode 100644
index 000000000000..aeb25e912179
--- /dev/null
+++ b/arch/sparc/include/asm/pgtsun4c.h
@@ -0,0 +1,172 @@
+/*
+ * pgtsun4c.h:  Sun4c specific pgtable.h defines and code.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_PGTSUN4C_H
+#define _SPARC_PGTSUN4C_H
+
+#include <asm/contregs.h>
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#define SUN4C_PMD_SHIFT       22
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#define SUN4C_PGDIR_SHIFT       22
+#define SUN4C_PGDIR_SIZE        (1UL << SUN4C_PGDIR_SHIFT)
+#define SUN4C_PGDIR_MASK        (~(SUN4C_PGDIR_SIZE-1))
+#define SUN4C_PGDIR_ALIGN(addr) (((addr)+SUN4C_PGDIR_SIZE-1)&SUN4C_PGDIR_MASK)
+
+/* To represent how the sun4c mmu really lays things out. */
+#define SUN4C_REAL_PGDIR_SHIFT       18
+#define SUN4C_REAL_PGDIR_SIZE        (1UL << SUN4C_REAL_PGDIR_SHIFT)
+#define SUN4C_REAL_PGDIR_MASK        (~(SUN4C_REAL_PGDIR_SIZE-1))
+#define SUN4C_REAL_PGDIR_ALIGN(addr) (((addr)+SUN4C_REAL_PGDIR_SIZE-1)&SUN4C_REAL_PGDIR_MASK)
+
+/* 16 bit PFN on sun4c */
+#define SUN4C_PFN_MASK 0xffff
+
+/* Don't increase these unless the structures in sun4c.c are fixed */
+#define SUN4C_MAX_SEGMAPS 256
+#define SUN4C_MAX_CONTEXTS 16
+
+/*
+ * To be efficient, and not have to worry about allocating such
+ * a huge pgd, we make the kernel sun4c tables each hold 1024
+ * entries and the pgd similarly just like the i386 tables.
+ */
+#define SUN4C_PTRS_PER_PTE    1024
+#define SUN4C_PTRS_PER_PMD    1
+#define SUN4C_PTRS_PER_PGD    1024
+
+/*
+ * Sparc SUN4C pte fields.
+ */
+#define _SUN4C_PAGE_VALID        0x80000000
+#define _SUN4C_PAGE_SILENT_READ  0x80000000   /* synonym */
+#define _SUN4C_PAGE_DIRTY        0x40000000
+#define _SUN4C_PAGE_SILENT_WRITE 0x40000000   /* synonym */
+#define _SUN4C_PAGE_PRIV         0x20000000   /* privileged page */
+#define _SUN4C_PAGE_NOCACHE      0x10000000   /* non-cacheable page */
+#define _SUN4C_PAGE_PRESENT      0x08000000   /* implemented in software */
+#define _SUN4C_PAGE_IO           0x04000000   /* I/O page */
+#define _SUN4C_PAGE_FILE         0x02000000   /* implemented in software */
+#define _SUN4C_PAGE_READ         0x00800000   /* implemented in software */
+#define _SUN4C_PAGE_WRITE        0x00400000   /* implemented in software */
+#define _SUN4C_PAGE_ACCESSED     0x00200000   /* implemented in software */
+#define _SUN4C_PAGE_MODIFIED     0x00100000   /* implemented in software */
+
+#define _SUN4C_READABLE		(_SUN4C_PAGE_READ|_SUN4C_PAGE_SILENT_READ|\
+				 _SUN4C_PAGE_ACCESSED)
+#define _SUN4C_WRITEABLE	(_SUN4C_PAGE_WRITE|_SUN4C_PAGE_SILENT_WRITE|\
+				 _SUN4C_PAGE_MODIFIED)
+
+#define _SUN4C_PAGE_CHG_MASK	(0xffff|_SUN4C_PAGE_ACCESSED|_SUN4C_PAGE_MODIFIED)
+
+#define SUN4C_PAGE_NONE		__pgprot(_SUN4C_PAGE_PRESENT)
+#define SUN4C_PAGE_SHARED	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE|\
+					 _SUN4C_PAGE_WRITE)
+#define SUN4C_PAGE_COPY		__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_READONLY	__pgprot(_SUN4C_PAGE_PRESENT|_SUN4C_READABLE)
+#define SUN4C_PAGE_KERNEL	__pgprot(_SUN4C_READABLE|_SUN4C_WRITEABLE|\
+					 _SUN4C_PAGE_DIRTY|_SUN4C_PAGE_PRIV)
+
+/* SUN4C swap entry encoding
+ *
+ * We use 5 bits for the type and 19 for the offset.  This gives us
+ * 32 swapfiles of 4GB each.  Encoding looks like:
+ *
+ * RRRRRRRRooooooooooooooooooottttt
+ * fedcba9876543210fedcba9876543210
+ *
+ * The top 8 bits are reserved for protection and status bits, especially
+ * FILE and PRESENT.
+ */
+#define SUN4C_SWP_TYPE_MASK	0x1f
+#define SUN4C_SWP_OFF_MASK	0x7ffff
+#define SUN4C_SWP_OFF_SHIFT	5
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned long sun4c_get_synchronous_error(void)
+{
+	unsigned long sync_err;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (sync_err) :
+			     "r" (AC_SYNC_ERR), "i" (ASI_CONTROL));
+	return sync_err;
+}
+
+static inline unsigned long sun4c_get_synchronous_address(void)
+{
+	unsigned long sync_addr;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t" :
+			     "=r" (sync_addr) :
+			     "r" (AC_SYNC_VA), "i" (ASI_CONTROL));
+	return sync_addr;
+}
+
+/* SUN4C pte, segmap, and context manipulation */
+static inline unsigned long sun4c_get_segmap(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" : 
+		       "=r" (entry) :
+		       "r" (addr), "i" (ASI_SEGMAP));
+
+  return entry;
+}
+
+static inline void sun4c_put_segmap(unsigned long addr, unsigned long entry)
+{
+
+  __asm__ __volatile__("\n\tstba %1, [%0] %2; nop; nop; nop;\n\t" : :
+		       "r" (addr), "r" (entry),
+		       "i" (ASI_SEGMAP)
+		       : "memory");
+}
+
+static inline unsigned long sun4c_get_pte(unsigned long addr)
+{
+  register unsigned long entry;
+
+  __asm__ __volatile__("\n\tlda [%1] %2, %0\n\t" : 
+		       "=r" (entry) :
+		       "r" (addr), "i" (ASI_PTE));
+  return entry;
+}
+
+static inline void sun4c_put_pte(unsigned long addr, unsigned long entry)
+{
+  __asm__ __volatile__("\n\tsta %1, [%0] %2; nop; nop; nop;\n\t" : :
+		       "r" (addr), 
+		       "r" ((entry & ~(_SUN4C_PAGE_PRESENT))), "i" (ASI_PTE)
+		       : "memory");
+}
+
+static inline int sun4c_get_context(void)
+{
+  register int ctx;
+
+  __asm__ __volatile__("\n\tlduba [%1] %2, %0\n\t" :
+		       "=r" (ctx) :
+		       "r" (AC_CONTEXT), "i" (ASI_CONTROL));
+
+  return ctx;
+}
+
+static inline int sun4c_set_context(int ctx)
+{
+  __asm__ __volatile__("\n\tstba %0, [%1] %2; nop; nop; nop;\n\t" : :
+		       "r" (ctx), "r" (AC_CONTEXT), "i" (ASI_CONTROL)
+		       : "memory");
+
+  return ctx;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_PGTSUN4C_H) */
diff --git a/arch/sparc/include/asm/pil.h b/arch/sparc/include/asm/pil.h
new file mode 100644
index 000000000000..71819bb943fc
--- /dev/null
+++ b/arch/sparc/include/asm/pil.h
@@ -0,0 +1,22 @@
+#ifndef _SPARC64_PIL_H
+#define _SPARC64_PIL_H
+
+/* To avoid some locking problems, we hard allocate certain PILs
+ * for SMP cross call messages that must do a etrap/rtrap.
+ *
+ * A local_irq_disable() does not block the cross call delivery, so
+ * when SMP locking is an issue we reschedule the event into a PIL
+ * interrupt which is blocked by local_irq_disable().
+ *
+ * In fact any XCALL which has to etrap/rtrap has a problem because
+ * it is difficult to prevent rtrap from running BH's, and that would
+ * need to be done if the XCALL arrived while %pil==15.
+ */
+#define PIL_SMP_CALL_FUNC	1
+#define PIL_SMP_RECEIVE_SIGNAL	2
+#define PIL_SMP_CAPTURE		3
+#define PIL_SMP_CTX_NEW_VERSION	4
+#define PIL_DEVICE_IRQ		5
+#define PIL_SMP_CALL_FUNC_SNGL	6
+
+#endif /* !(_SPARC64_PIL_H) */
diff --git a/arch/sparc/include/asm/poll.h b/arch/sparc/include/asm/poll.h
new file mode 100644
index 000000000000..091d3ad2e830
--- /dev/null
+++ b/arch/sparc/include/asm/poll.h
@@ -0,0 +1,12 @@
+#ifndef __SPARC_POLL_H
+#define __SPARC_POLL_H
+
+#define POLLWRNORM	POLLOUT
+#define POLLWRBAND	256
+#define POLLMSG		512
+#define POLLREMOVE	1024
+#define POLLRDHUP       2048
+
+#include <asm-generic/poll.h>
+
+#endif
diff --git a/arch/sparc/include/asm/posix_types.h b/arch/sparc/include/asm/posix_types.h
new file mode 100644
index 000000000000..03a0e091a884
--- /dev/null
+++ b/arch/sparc/include/asm/posix_types.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_POSIX_TYPES_H
+#define ___ASM_SPARC_POSIX_TYPES_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/posix_types_64.h>
+#else
+#include <asm/posix_types_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/posix_types_32.h b/arch/sparc/include/asm/posix_types_32.h
new file mode 100644
index 000000000000..6bb6eb1ca0f2
--- /dev/null
+++ b/arch/sparc/include/asm/posix_types_32.h
@@ -0,0 +1,118 @@
+#ifndef __ARCH_SPARC_POSIX_TYPES_H
+#define __ARCH_SPARC_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned int           __kernel_size_t;
+typedef int                    __kernel_ssize_t;
+typedef long int               __kernel_ptrdiff_t;
+typedef long                   __kernel_time_t;
+typedef long		       __kernel_suseconds_t;
+typedef long                   __kernel_clock_t;
+typedef int                    __kernel_pid_t;
+typedef unsigned short         __kernel_ipc_pid_t;
+typedef unsigned short         __kernel_uid_t;
+typedef unsigned short         __kernel_gid_t;
+typedef unsigned long          __kernel_ino_t;
+typedef unsigned short         __kernel_mode_t;
+typedef unsigned short         __kernel_umode_t;
+typedef short                  __kernel_nlink_t;
+typedef long                   __kernel_daddr_t;
+typedef long                   __kernel_off_t;
+typedef char *                 __kernel_caddr_t;
+typedef unsigned short	       __kernel_uid16_t;
+typedef unsigned short	       __kernel_gid16_t;
+typedef unsigned int	       __kernel_uid32_t;
+typedef unsigned int	       __kernel_gid32_t;
+typedef unsigned short	       __kernel_old_uid_t;
+typedef unsigned short	       __kernel_old_gid_t;
+typedef unsigned short	       __kernel_old_dev_t;
+typedef int                    __kernel_clockid_t;
+typedef int                    __kernel_timer_t;
+
+#ifdef __GNUC__
+typedef long long	__kernel_loff_t;
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant cases (8 or 32 longs,
+ * for 256 and 1024-bit fd_sets respectively)
+ */
+#undef __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+			case 32:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
+			  tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
+			  tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
+			  tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
+			  return;
+			case 16:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  return;
+			case 8:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  return;
+			case 4:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* !(__ARCH_SPARC_POSIX_TYPES_H) */
diff --git a/arch/sparc/include/asm/posix_types_64.h b/arch/sparc/include/asm/posix_types_64.h
new file mode 100644
index 000000000000..ba8f93295763
--- /dev/null
+++ b/arch/sparc/include/asm/posix_types_64.h
@@ -0,0 +1,122 @@
+#ifndef __ARCH_SPARC64_POSIX_TYPES_H
+#define __ARCH_SPARC64_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long          __kernel_size_t;
+typedef long                   __kernel_ssize_t;
+typedef long                   __kernel_ptrdiff_t;
+typedef long                   __kernel_time_t;
+typedef long                   __kernel_clock_t;
+typedef int                    __kernel_pid_t;
+typedef int                    __kernel_ipc_pid_t;
+typedef unsigned int           __kernel_uid_t;
+typedef unsigned int           __kernel_gid_t;
+typedef unsigned long          __kernel_ino_t;
+typedef unsigned int           __kernel_mode_t;
+typedef unsigned short         __kernel_umode_t;
+typedef unsigned int           __kernel_nlink_t;
+typedef int                    __kernel_daddr_t;
+typedef long                   __kernel_off_t;
+typedef char *                 __kernel_caddr_t;
+typedef unsigned short	       __kernel_uid16_t;
+typedef unsigned short	       __kernel_gid16_t;
+typedef int                    __kernel_clockid_t;
+typedef int                    __kernel_timer_t;
+
+typedef unsigned short 	       __kernel_old_uid_t;
+typedef unsigned short         __kernel_old_gid_t;
+typedef __kernel_uid_t	       __kernel_uid32_t;
+typedef __kernel_gid_t	       __kernel_gid32_t;
+
+typedef unsigned int	       __kernel_old_dev_t;
+
+/* Note this piece of asymmetry from the v9 ABI.  */
+typedef int		       __kernel_suseconds_t;
+
+#ifdef __GNUC__
+typedef long long              __kernel_loff_t;
+#endif
+
+typedef struct {
+	int	val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef __FD_SET
+static inline void __FD_SET(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] |= (1UL<<_rem);
+}
+
+#undef __FD_CLR
+static inline void __FD_CLR(unsigned long fd, __kernel_fd_set *fdsetp)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	fdsetp->fds_bits[_tmp] &= ~(1UL<<_rem);
+}
+
+#undef __FD_ISSET
+static inline int __FD_ISSET(unsigned long fd, __const__ __kernel_fd_set *p)
+{
+	unsigned long _tmp = fd / __NFDBITS;
+	unsigned long _rem = fd % __NFDBITS;
+	return (p->fds_bits[_tmp] & (1UL<<_rem)) != 0;
+}
+
+/*
+ * This will unroll the loop for the normal constant cases (8 or 32 longs,
+ * for 256 and 1024-bit fd_sets respectively)
+ */
+#undef __FD_ZERO
+static inline void __FD_ZERO(__kernel_fd_set *p)
+{
+	unsigned long *tmp = p->fds_bits;
+	int i;
+
+	if (__builtin_constant_p(__FDSET_LONGS)) {
+		switch (__FDSET_LONGS) {
+			case 32:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  tmp[16] = 0; tmp[17] = 0; tmp[18] = 0; tmp[19] = 0;
+			  tmp[20] = 0; tmp[21] = 0; tmp[22] = 0; tmp[23] = 0;
+			  tmp[24] = 0; tmp[25] = 0; tmp[26] = 0; tmp[27] = 0;
+			  tmp[28] = 0; tmp[29] = 0; tmp[30] = 0; tmp[31] = 0;
+			  return;
+			case 16:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  tmp[ 8] = 0; tmp[ 9] = 0; tmp[10] = 0; tmp[11] = 0;
+			  tmp[12] = 0; tmp[13] = 0; tmp[14] = 0; tmp[15] = 0;
+			  return;
+			case 8:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  tmp[ 4] = 0; tmp[ 5] = 0; tmp[ 6] = 0; tmp[ 7] = 0;
+			  return;
+			case 4:
+			  tmp[ 0] = 0; tmp[ 1] = 0; tmp[ 2] = 0; tmp[ 3] = 0;
+			  return;
+		}
+	}
+	i = __FDSET_LONGS;
+	while (i) {
+		i--;
+		*tmp = 0;
+		tmp++;
+	}
+}
+
+#endif /* defined(__KERNEL__) */
+
+#endif /* !(__ARCH_SPARC64_POSIX_TYPES_H) */
diff --git a/arch/sparc/include/asm/processor.h b/arch/sparc/include/asm/processor.h
new file mode 100644
index 000000000000..9da9646bf6c6
--- /dev/null
+++ b/arch/sparc/include/asm/processor.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PROCESSOR_H
+#define ___ASM_SPARC_PROCESSOR_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/processor_64.h>
+#else
+#include <asm/processor_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/processor_32.h b/arch/sparc/include/asm/processor_32.h
new file mode 100644
index 000000000000..2ae67a2e7f3a
--- /dev/null
+++ b/arch/sparc/include/asm/processor_32.h
@@ -0,0 +1,129 @@
+/* include/asm/processor.h
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC_PROCESSOR_H
+#define __ASM_SPARC_PROCESSOR_H
+
+/*
+ * Sparc32 implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("sethi %%hi(1f), %0; or %0, %%lo(1f), %0;\n1:" : "=r" (pc)); pc; })
+
+#include <asm/psr.h>
+#include <asm/ptrace.h>
+#include <asm/head.h>
+#include <asm/signal.h>
+#include <asm/btfixup.h>
+#include <asm/page.h>
+
+/*
+ * The sparc has no problems with write protection
+ */
+#define wp_works_ok 1
+#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
+
+/* Whee, this is STACK_TOP + PAGE_SIZE and the lowest kernel address too...
+ * That one page is used to protect kernel from intruders, so that
+ * we can make our access_ok test faster
+ */
+#define TASK_SIZE	PAGE_OFFSET
+#ifdef __KERNEL__
+#define STACK_TOP	(PAGE_OFFSET - PAGE_SIZE)
+#define STACK_TOP_MAX	STACK_TOP
+#endif /* __KERNEL__ */
+
+struct task_struct;
+
+#ifdef __KERNEL__
+struct fpq {
+	unsigned long *insn_addr;
+	unsigned long insn;
+};
+#endif
+
+typedef struct {
+	int seg;
+} mm_segment_t;
+
+/* The Sparc processor specific thread struct. */
+struct thread_struct {
+	struct pt_regs *kregs;
+	unsigned int _pad1;
+
+	/* Special child fork kpsr/kwim values. */
+	unsigned long fork_kpsr __attribute__ ((aligned (8)));
+	unsigned long fork_kwim;
+
+	/* Floating point regs */
+	unsigned long   float_regs[32] __attribute__ ((aligned (8)));
+	unsigned long   fsr;
+	unsigned long   fpqdepth;
+	struct fpq	fpqueue[16];
+	unsigned long flags;
+	mm_segment_t current_ds;
+};
+
+#define SPARC_FLAG_KTHREAD      0x1    /* task is a kernel thread */
+#define SPARC_FLAG_UNALIGNED    0x2    /* is allowed to do unaligned accesses */
+
+#define INIT_THREAD  { \
+	.flags = SPARC_FLAG_KTHREAD, \
+	.current_ds = KERNEL_DS, \
+}
+
+/* Return saved PC of a blocked thread. */
+extern unsigned long thread_saved_pc(struct task_struct *t);
+
+/* Do necessary setup to start up a newly executed thread. */
+static inline void start_thread(struct pt_regs * regs, unsigned long pc,
+				    unsigned long sp)
+{
+	register unsigned long zero asm("g1");
+
+	regs->psr = (regs->psr & (PSR_CWP)) | PSR_S;
+	regs->pc = ((pc & (~3)) - 4);
+	regs->npc = regs->pc + 4;
+	regs->y = 0;
+	zero = 0;
+	__asm__ __volatile__("std\t%%g0, [%0 + %3 + 0x00]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x08]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x10]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x18]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x20]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x28]\n\t"
+			     "std\t%%g0, [%0 + %3 + 0x30]\n\t"
+			     "st\t%1, [%0 + %3 + 0x38]\n\t"
+			     "st\t%%g0, [%0 + %3 + 0x3c]"
+			     : /* no outputs */
+			     : "r" (regs),
+			       "r" (sp - sizeof(struct reg_window)),
+			       "r" (zero),
+			       "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))
+			     : "memory");
+}
+
+/* Free all resources held by a thread. */
+#define release_thread(tsk)		do { } while(0)
+extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern unsigned long get_wchan(struct task_struct *);
+
+#define task_pt_regs(tsk) ((tsk)->thread.kregs)
+#define KSTK_EIP(tsk)  ((tsk)->thread.kregs->pc)
+#define KSTK_ESP(tsk)  ((tsk)->thread.kregs->u_regs[UREG_FP])
+
+#ifdef __KERNEL__
+
+extern struct task_struct *last_task_used_math;
+
+#define cpu_relax()	barrier()
+
+#endif
+
+#endif /* __ASM_SPARC_PROCESSOR_H */
diff --git a/arch/sparc/include/asm/processor_64.h b/arch/sparc/include/asm/processor_64.h
new file mode 100644
index 000000000000..137a6bd72fc8
--- /dev/null
+++ b/arch/sparc/include/asm/processor_64.h
@@ -0,0 +1,237 @@
+/*
+ * include/asm/processor.h
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __ASM_SPARC64_PROCESSOR_H
+#define __ASM_SPARC64_PROCESSOR_H
+
+/*
+ * Sparc64 implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ void *pc; __asm__("rd %%pc, %0" : "=r" (pc)); pc; })
+
+#include <asm/asi.h>
+#include <asm/pstate.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/* The sparc has no problems with write protection */
+#define wp_works_ok 1
+#define wp_works_ok__is_a_macro /* for versions in ksyms.c */
+
+/*
+ * User lives in his very own context, and cannot reference us. Note
+ * that TASK_SIZE is a misnomer, it really gives maximum user virtual
+ * address that the kernel will allocate out.
+ *
+ * XXX No longer using virtual page tables, kill this upper limit...
+ */
+#define VA_BITS		44
+#ifndef __ASSEMBLY__
+#define VPTE_SIZE	(1UL << (VA_BITS - PAGE_SHIFT + 3))
+#else
+#define VPTE_SIZE	(1 << (VA_BITS - PAGE_SHIFT + 3))
+#endif
+
+#define TASK_SIZE	((unsigned long)-VPTE_SIZE)
+#define TASK_SIZE_OF(tsk) \
+	(test_tsk_thread_flag(tsk,TIF_32BIT) ? \
+	 (1UL << 32UL) : TASK_SIZE)
+#ifdef __KERNEL__
+
+#define STACK_TOP32	((1UL << 32UL) - PAGE_SIZE)
+#define STACK_TOP64	(0x0000080000000000UL - (1UL << 32UL))
+
+#define STACK_TOP	(test_thread_flag(TIF_32BIT) ? \
+			 STACK_TOP32 : STACK_TOP64)
+
+#define STACK_TOP_MAX	STACK_TOP64
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+	unsigned char seg;
+} mm_segment_t;
+
+/* The Sparc processor specific thread struct. */
+/* XXX This should die, everything can go into thread_info now. */
+struct thread_struct {
+#ifdef CONFIG_DEBUG_SPINLOCK
+	/* How many spinlocks held by this thread.
+	 * Used with spin lock debugging to catch tasks
+	 * sleeping illegally with locks held.
+	 */
+	int smp_lock_count;
+	unsigned int smp_lock_pc;
+#else
+	int dummy; /* f'in gcc bug... */
+#endif
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#ifndef CONFIG_DEBUG_SPINLOCK
+#define INIT_THREAD  {			\
+	0,				\
+}
+#else /* CONFIG_DEBUG_SPINLOCK */
+#define INIT_THREAD  {					\
+/* smp_lock_count, smp_lock_pc, */			\
+   0,		   0,					\
+}
+#endif /* !(CONFIG_DEBUG_SPINLOCK) */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+/* Return saved PC of a blocked thread. */
+struct task_struct;
+extern unsigned long thread_saved_pc(struct task_struct *);
+
+/* On Uniprocessor, even in RMO processes see TSO semantics */
+#ifdef CONFIG_SMP
+#define TSTATE_INITIAL_MM	TSTATE_TSO
+#else
+#define TSTATE_INITIAL_MM	TSTATE_RMO
+#endif
+
+/* Do necessary setup to start up a newly executed thread. */
+#define start_thread(regs, pc, sp) \
+do { \
+	unsigned long __asi = ASI_PNF; \
+	regs->tstate = (regs->tstate & (TSTATE_CWP)) | (TSTATE_INITIAL_MM|TSTATE_IE) | (__asi << 24UL); \
+	regs->tpc = ((pc & (~3)) - 4); \
+	regs->tnpc = regs->tpc + 4; \
+	regs->y = 0; \
+	set_thread_wstate(1 << 3); \
+	if (current_thread_info()->utraps) { \
+		if (*(current_thread_info()->utraps) < 2) \
+			kfree(current_thread_info()->utraps); \
+		else \
+			(*(current_thread_info()->utraps))--; \
+		current_thread_info()->utraps = NULL; \
+	} \
+	__asm__ __volatile__( \
+	"stx		%%g0, [%0 + %2 + 0x00]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x08]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x10]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x18]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x20]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x28]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x30]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x38]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x40]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x48]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x50]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x58]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x60]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x68]\n\t" \
+	"stx		%1,   [%0 + %2 + 0x70]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x78]\n\t" \
+	"wrpr		%%g0, (1 << 3), %%wstate\n\t" \
+	: \
+	: "r" (regs), "r" (sp - sizeof(struct reg_window) - STACK_BIAS), \
+	  "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
+} while (0)
+
+#define start_thread32(regs, pc, sp) \
+do { \
+	unsigned long __asi = ASI_PNF; \
+	pc &= 0x00000000ffffffffUL; \
+	sp &= 0x00000000ffffffffUL; \
+	regs->tstate = (regs->tstate & (TSTATE_CWP))|(TSTATE_INITIAL_MM|TSTATE_IE|TSTATE_AM) | (__asi << 24UL); \
+	regs->tpc = ((pc & (~3)) - 4); \
+	regs->tnpc = regs->tpc + 4; \
+	regs->y = 0; \
+	set_thread_wstate(2 << 3); \
+	if (current_thread_info()->utraps) { \
+		if (*(current_thread_info()->utraps) < 2) \
+			kfree(current_thread_info()->utraps); \
+		else \
+			(*(current_thread_info()->utraps))--; \
+		current_thread_info()->utraps = NULL; \
+	} \
+	__asm__ __volatile__( \
+	"stx		%%g0, [%0 + %2 + 0x00]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x08]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x10]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x18]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x20]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x28]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x30]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x38]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x40]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x48]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x50]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x58]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x60]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x68]\n\t" \
+	"stx		%1,   [%0 + %2 + 0x70]\n\t" \
+	"stx		%%g0, [%0 + %2 + 0x78]\n\t" \
+	"wrpr		%%g0, (2 << 3), %%wstate\n\t" \
+	: \
+	: "r" (regs), "r" (sp - sizeof(struct reg_window32)), \
+	  "i" ((const unsigned long)(&((struct pt_regs *)0)->u_regs[0]))); \
+} while (0)
+
+/* Free all resources held by a thread. */
+#define release_thread(tsk)		do { } while (0)
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern pid_t kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+extern unsigned long get_wchan(struct task_struct *task);
+
+#define task_pt_regs(tsk) (task_thread_info(tsk)->kregs)
+#define KSTK_EIP(tsk)  (task_pt_regs(tsk)->tpc)
+#define KSTK_ESP(tsk)  (task_pt_regs(tsk)->u_regs[UREG_FP])
+
+#define cpu_relax()	barrier()
+
+/* Prefetch support.  This is tuned for UltraSPARC-III and later.
+ * UltraSPARC-I will treat these as nops, and UltraSPARC-II has
+ * a shallower prefetch queue than later chips.
+ */
+#define ARCH_HAS_PREFETCH
+#define ARCH_HAS_PREFETCHW
+#define ARCH_HAS_SPINLOCK_PREFETCH
+
+static inline void prefetch(const void *x)
+{
+	/* We do not use the read prefetch mnemonic because that
+	 * prefetches into the prefetch-cache which only is accessible
+	 * by floating point operations in UltraSPARC-III and later.
+	 * By contrast, "#one_write" prefetches into the L2 cache
+	 * in shared state.
+	 */
+	__asm__ __volatile__("prefetch [%0], #one_write"
+			     : /* no outputs */
+			     : "r" (x));
+}
+
+static inline void prefetchw(const void *x)
+{
+	/* The most optimal prefetch to use for writes is
+	 * "#n_writes".  This brings the cacheline into the
+	 * L2 cache in "owned" state.
+	 */
+	__asm__ __volatile__("prefetch [%0], #n_writes"
+			     : /* no outputs */
+			     : "r" (x));
+}
+
+#define spin_lock_prefetch(x)	prefetchw(x)
+
+#define HAVE_ARCH_PICK_MMAP_LAYOUT
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h
new file mode 100644
index 000000000000..fd55522481cd
--- /dev/null
+++ b/arch/sparc/include/asm/prom.h
@@ -0,0 +1,108 @@
+#ifndef _SPARC_PROM_H
+#define _SPARC_PROM_H
+#ifdef __KERNEL__
+
+/*
+ * Definitions for talking to the Open Firmware PROM on
+ * Power Macintosh computers.
+ *
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Updates for PPC64 by Peter Bergner & David Engebretsen, IBM Corp.
+ * Updates for SPARC by David S. Miller
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <asm/atomic.h>
+
+#define OF_ROOT_NODE_ADDR_CELLS_DEFAULT	2
+#define OF_ROOT_NODE_SIZE_CELLS_DEFAULT	1
+
+#define of_compat_cmp(s1, s2, l)	strncmp((s1), (s2), (l))
+#define of_prop_cmp(s1, s2)		strcasecmp((s1), (s2))
+#define of_node_cmp(s1, s2)		strcmp((s1), (s2))
+
+typedef u32 phandle;
+typedef u32 ihandle;
+
+struct property {
+	char	*name;
+	int	length;
+	void	*value;
+	struct property *next;
+	unsigned long _flags;
+	unsigned int unique_id;
+};
+
+struct of_irq_controller;
+struct device_node {
+	const char	*name;
+	const char	*type;
+	phandle	node;
+	char	*path_component_name;
+	char	*full_name;
+
+	struct	property *properties;
+	struct  property *deadprops; /* removed properties */
+	struct	device_node *parent;
+	struct	device_node *child;
+	struct	device_node *sibling;
+	struct	device_node *next;	/* next device of same type */
+	struct	device_node *allnext;	/* next in list of all nodes */
+	struct  proc_dir_entry *pde;	/* this node's proc directory */
+	struct  kref kref;
+	unsigned long _flags;
+	void	*data;
+	unsigned int unique_id;
+
+	struct of_irq_controller *irq_trans;
+};
+
+struct of_irq_controller {
+	unsigned int	(*irq_build)(struct device_node *, unsigned int, void *);
+	void		*data;
+};
+
+#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
+#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
+
+extern struct device_node *of_find_node_by_cpuid(int cpuid);
+extern int of_set_property(struct device_node *node, const char *name, void *val, int len);
+extern int of_getintprop_default(struct device_node *np,
+				 const char *name,
+				 int def);
+extern int of_find_in_proplist(const char *list, const char *match, int len);
+#ifdef CONFIG_NUMA
+extern int of_node_to_nid(struct device_node *dp);
+#else
+#define of_node_to_nid(dp)	(-1)
+#endif
+
+extern void prom_build_devicetree(void);
+
+/* Dummy ref counting routines - to be implemented later */
+static inline struct device_node *of_node_get(struct device_node *node)
+{
+	return node;
+}
+static inline void of_node_put(struct device_node *node)
+{
+}
+
+/*
+ * NB:  This is here while we transition from using asm/prom.h
+ * to linux/of.h
+ */
+#include <linux/of.h>
+
+extern struct device_node *of_console_device;
+extern char *of_console_path;
+extern char *of_console_options;
+
+#endif /* __KERNEL__ */
+#endif /* _SPARC_PROM_H */
diff --git a/arch/sparc/include/asm/psr.h b/arch/sparc/include/asm/psr.h
new file mode 100644
index 000000000000..b8c0e5f0a66b
--- /dev/null
+++ b/arch/sparc/include/asm/psr.h
@@ -0,0 +1,93 @@
+/*
+ * psr.h: This file holds the macros for masking off various parts of
+ *        the processor status register on the Sparc. This is valid
+ *        for Version 8. On the V9 this is renamed to the PSTATE
+ *        register and its members are accessed as fields like
+ *        PSTATE.PRIV for the current CPU privilege level.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __LINUX_SPARC_PSR_H
+#define __LINUX_SPARC_PSR_H
+
+/* The Sparc PSR fields are laid out as the following:
+ *
+ *  ------------------------------------------------------------------------
+ *  | impl  | vers  | icc   | resv  | EC | EF | PIL  | S | PS | ET |  CWP  |
+ *  | 31-28 | 27-24 | 23-20 | 19-14 | 13 | 12 | 11-8 | 7 | 6  | 5  |  4-0  |
+ *  ------------------------------------------------------------------------
+ */
+#define PSR_CWP     0x0000001f         /* current window pointer     */
+#define PSR_ET      0x00000020         /* enable traps field         */
+#define PSR_PS      0x00000040         /* previous privilege level   */
+#define PSR_S       0x00000080         /* current privilege level    */
+#define PSR_PIL     0x00000f00         /* processor interrupt level  */
+#define PSR_EF      0x00001000         /* enable floating point      */
+#define PSR_EC      0x00002000         /* enable co-processor        */
+#define PSR_SYSCALL 0x00004000         /* inside of a syscall        */
+#define PSR_LE      0x00008000         /* SuperSparcII little-endian */
+#define PSR_ICC     0x00f00000         /* integer condition codes    */
+#define PSR_C       0x00100000         /* carry bit                  */
+#define PSR_V       0x00200000         /* overflow bit               */
+#define PSR_Z       0x00400000         /* zero bit                   */
+#define PSR_N       0x00800000         /* negative bit               */
+#define PSR_VERS    0x0f000000         /* cpu-version field          */
+#define PSR_IMPL    0xf0000000         /* cpu-implementation field   */
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+/* Get the %psr register. */
+static inline unsigned int get_psr(void)
+{
+	unsigned int psr;
+	__asm__ __volatile__(
+		"rd	%%psr, %0\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+	: "=r" (psr)
+	: /* no inputs */
+	: "memory");
+
+	return psr;
+}
+
+static inline void put_psr(unsigned int new_psr)
+{
+	__asm__ __volatile__(
+		"wr	%0, 0x0, %%psr\n\t"
+		"nop\n\t"
+		"nop\n\t"
+		"nop\n\t"
+	: /* no outputs */
+	: "r" (new_psr)
+	: "memory", "cc");
+}
+
+/* Get the %fsr register.  Be careful, make sure the floating point
+ * enable bit is set in the %psr when you execute this or you will
+ * incur a trap.
+ */
+
+extern unsigned int fsr_storage;
+
+static inline unsigned int get_fsr(void)
+{
+	unsigned int fsr = 0;
+
+	__asm__ __volatile__(
+		"st	%%fsr, %1\n\t"
+		"ld	%1, %0\n\t"
+	: "=r" (fsr)
+	: "m" (fsr_storage));
+
+	return fsr;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* (__KERNEL__) */
+
+#endif /* !(__LINUX_SPARC_PSR_H) */
diff --git a/arch/sparc/include/asm/psrcompat.h b/arch/sparc/include/asm/psrcompat.h
new file mode 100644
index 000000000000..44b6327dbbf5
--- /dev/null
+++ b/arch/sparc/include/asm/psrcompat.h
@@ -0,0 +1,45 @@
+#ifndef _SPARC64_PSRCOMPAT_H
+#define _SPARC64_PSRCOMPAT_H
+
+#include <asm/pstate.h>
+
+/* Old 32-bit PSR fields for the compatibility conversion code. */
+#define PSR_CWP     0x0000001f         /* current window pointer     */
+#define PSR_ET      0x00000020         /* enable traps field         */
+#define PSR_PS      0x00000040         /* previous privilege level   */
+#define PSR_S       0x00000080         /* current privilege level    */
+#define PSR_PIL     0x00000f00         /* processor interrupt level  */
+#define PSR_EF      0x00001000         /* enable floating point      */
+#define PSR_EC      0x00002000         /* enable co-processor        */
+#define PSR_SYSCALL 0x00004000         /* inside of a syscall        */
+#define PSR_LE      0x00008000         /* SuperSparcII little-endian */
+#define PSR_ICC     0x00f00000         /* integer condition codes    */
+#define PSR_C       0x00100000         /* carry bit                  */
+#define PSR_V       0x00200000         /* overflow bit               */
+#define PSR_Z       0x00400000         /* zero bit                   */
+#define PSR_N       0x00800000         /* negative bit               */
+#define PSR_VERS    0x0f000000         /* cpu-version field          */
+#define PSR_IMPL    0xf0000000         /* cpu-implementation field   */
+
+#define PSR_V8PLUS  0xff000000         /* fake impl/ver, meaning a 64bit CPU is present */
+#define PSR_XCC	    0x000f0000         /* if PSR_V8PLUS, this is %xcc */
+
+static inline unsigned int tstate_to_psr(unsigned long tstate)
+{
+	return ((tstate & TSTATE_CWP)			|
+		PSR_S					|
+		((tstate & TSTATE_ICC) >> 12)		|
+		((tstate & TSTATE_XCC) >> 20)		|
+		((tstate & TSTATE_SYSCALL) ? PSR_SYSCALL : 0) |
+		PSR_V8PLUS);
+}
+
+static inline unsigned long psr_to_tstate_icc(unsigned int psr)
+{
+	unsigned long tstate = ((unsigned long)(psr & PSR_ICC)) << 12;
+	if ((psr & (PSR_VERS|PSR_IMPL)) == PSR_V8PLUS)
+		tstate |= ((unsigned long)(psr & PSR_XCC)) << 20;
+	return tstate;
+}
+
+#endif /* !(_SPARC64_PSRCOMPAT_H) */
diff --git a/arch/sparc/include/asm/pstate.h b/arch/sparc/include/asm/pstate.h
new file mode 100644
index 000000000000..a26a53777bb0
--- /dev/null
+++ b/arch/sparc/include/asm/pstate.h
@@ -0,0 +1,91 @@
+#ifndef _SPARC64_PSTATE_H
+#define _SPARC64_PSTATE_H
+
+#include <linux/const.h>
+
+/* The V9 PSTATE Register (with SpitFire extensions).
+ *
+ * -----------------------------------------------------------------------
+ * | Resv | IG | MG | CLE | TLE |  MM  | RED | PEF | AM | PRIV | IE | AG |
+ * -----------------------------------------------------------------------
+ *  63  12  11   10    9     8    7   6   5     4     3     2     1    0
+ */
+#define PSTATE_IG   _AC(0x0000000000000800,UL) /* Interrupt Globals.	*/
+#define PSTATE_MG   _AC(0x0000000000000400,UL) /* MMU Globals.		*/
+#define PSTATE_CLE  _AC(0x0000000000000200,UL) /* Current Little Endian.*/
+#define PSTATE_TLE  _AC(0x0000000000000100,UL) /* Trap Little Endian.	*/
+#define PSTATE_MM   _AC(0x00000000000000c0,UL) /* Memory Model.		*/
+#define PSTATE_TSO  _AC(0x0000000000000000,UL) /* MM: TotalStoreOrder	*/
+#define PSTATE_PSO  _AC(0x0000000000000040,UL) /* MM: PartialStoreOrder	*/
+#define PSTATE_RMO  _AC(0x0000000000000080,UL) /* MM: RelaxedMemoryOrder*/
+#define PSTATE_RED  _AC(0x0000000000000020,UL) /* Reset Error Debug.	*/
+#define PSTATE_PEF  _AC(0x0000000000000010,UL) /* Floating Point Enable.*/
+#define PSTATE_AM   _AC(0x0000000000000008,UL) /* Address Mask.		*/
+#define PSTATE_PRIV _AC(0x0000000000000004,UL) /* Privilege.		*/
+#define PSTATE_IE   _AC(0x0000000000000002,UL) /* Interrupt Enable.	*/
+#define PSTATE_AG   _AC(0x0000000000000001,UL) /* Alternate Globals.	*/
+
+/* The V9 TSTATE Register (with SpitFire and Linux extensions).
+ *
+ * ---------------------------------------------------------------------
+ * |  Resv |  GL  |  CCR  |  ASI  |  %pil  |  PSTATE  |  Resv  |  CWP  |
+ * ---------------------------------------------------------------------
+ *  63   43 42  40 39   32 31   24 23    20 19       8 7      5 4     0
+ */
+#define TSTATE_GL	_AC(0x0000070000000000,UL) /* Global reg level  */
+#define TSTATE_CCR	_AC(0x000000ff00000000,UL) /* Condition Codes.	*/
+#define TSTATE_XCC	_AC(0x000000f000000000,UL) /* Condition Codes.	*/
+#define TSTATE_XNEG	_AC(0x0000008000000000,UL) /* %xcc Negative.	*/
+#define TSTATE_XZERO	_AC(0x0000004000000000,UL) /* %xcc Zero.	*/
+#define TSTATE_XOVFL	_AC(0x0000002000000000,UL) /* %xcc Overflow.	*/
+#define TSTATE_XCARRY	_AC(0x0000001000000000,UL) /* %xcc Carry.	*/
+#define TSTATE_ICC	_AC(0x0000000f00000000,UL) /* Condition Codes.	*/
+#define TSTATE_INEG	_AC(0x0000000800000000,UL) /* %icc Negative.	*/
+#define TSTATE_IZERO	_AC(0x0000000400000000,UL) /* %icc Zero.	*/
+#define TSTATE_IOVFL	_AC(0x0000000200000000,UL) /* %icc Overflow.	*/
+#define TSTATE_ICARRY	_AC(0x0000000100000000,UL) /* %icc Carry.	*/
+#define TSTATE_ASI	_AC(0x00000000ff000000,UL) /* AddrSpace ID.	*/
+#define TSTATE_PIL	_AC(0x0000000000f00000,UL) /* %pil (Linux traps)*/
+#define TSTATE_PSTATE	_AC(0x00000000000fff00,UL) /* PSTATE.		*/
+#define TSTATE_IG	_AC(0x0000000000080000,UL) /* Interrupt Globals.*/
+#define TSTATE_MG	_AC(0x0000000000040000,UL) /* MMU Globals.	*/
+#define TSTATE_CLE	_AC(0x0000000000020000,UL) /* CurrLittleEndian.	*/
+#define TSTATE_TLE	_AC(0x0000000000010000,UL) /* TrapLittleEndian.	*/
+#define TSTATE_MM	_AC(0x000000000000c000,UL) /* Memory Model.	*/
+#define TSTATE_TSO	_AC(0x0000000000000000,UL) /* MM: TSO		*/
+#define TSTATE_PSO	_AC(0x0000000000004000,UL) /* MM: PSO		*/
+#define TSTATE_RMO	_AC(0x0000000000008000,UL) /* MM: RMO		*/
+#define TSTATE_RED	_AC(0x0000000000002000,UL) /* Reset Error Debug.*/
+#define TSTATE_PEF	_AC(0x0000000000001000,UL) /* FPU Enable.	*/
+#define TSTATE_AM	_AC(0x0000000000000800,UL) /* Address Mask.	*/
+#define TSTATE_PRIV	_AC(0x0000000000000400,UL) /* Privilege.	*/
+#define TSTATE_IE	_AC(0x0000000000000200,UL) /* Interrupt Enable.	*/
+#define TSTATE_AG	_AC(0x0000000000000100,UL) /* Alternate Globals.*/
+#define TSTATE_SYSCALL	_AC(0x0000000000000020,UL) /* in syscall trap   */
+#define TSTATE_CWP	_AC(0x000000000000001f,UL) /* Curr Win-Pointer.	*/
+
+/* Floating-Point Registers State Register.
+ *
+ * --------------------------------
+ * |  Resv  |  FEF  |  DU  |  DL  |
+ * --------------------------------
+ *  63     3    2       1      0
+ */
+#define FPRS_FEF	_AC(0x0000000000000004,UL) /* FPU Enable.	*/
+#define FPRS_DU		_AC(0x0000000000000002,UL) /* Dirty Upper.	*/
+#define FPRS_DL		_AC(0x0000000000000001,UL) /* Dirty Lower.	*/
+
+/* Version Register.
+ *
+ * ------------------------------------------------------
+ * | MANUF | IMPL | MASK | Resv | MAXTL | Resv | MAXWIN |
+ * ------------------------------------------------------
+ *  63   48 47  32 31  24 23  16 15    8 7    5 4      0
+ */
+#define VERS_MANUF	_AC(0xffff000000000000,UL) /* Manufacturer.	*/
+#define VERS_IMPL	_AC(0x0000ffff00000000,UL) /* Implementation.	*/
+#define VERS_MASK	_AC(0x00000000ff000000,UL) /* Mask Set Revision.*/
+#define VERS_MAXTL	_AC(0x000000000000ff00,UL) /* Max Trap Level.	*/
+#define VERS_MAXWIN	_AC(0x000000000000001f,UL) /* Max RegWindow Idx.*/
+
+#endif /* !(_SPARC64_PSTATE_H) */
diff --git a/arch/sparc/include/asm/ptrace.h b/arch/sparc/include/asm/ptrace.h
new file mode 100644
index 000000000000..6dcbe2eed2e2
--- /dev/null
+++ b/arch/sparc/include/asm/ptrace.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_PTRACE_H
+#define ___ASM_SPARC_PTRACE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/ptrace_64.h>
+#else
+#include <asm/ptrace_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/ptrace_32.h b/arch/sparc/include/asm/ptrace_32.h
new file mode 100644
index 000000000000..d409c4f21a5c
--- /dev/null
+++ b/arch/sparc/include/asm/ptrace_32.h
@@ -0,0 +1,176 @@
+#ifndef _SPARC_PTRACE_H
+#define _SPARC_PTRACE_H
+
+#include <asm/psr.h>
+
+/* This struct defines the way the registers are stored on the
+ * stack during a system call and basically all traps.
+ */
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct pt_regs {
+	unsigned long psr;
+	unsigned long pc;
+	unsigned long npc;
+	unsigned long y;
+	unsigned long u_regs[16]; /* globals and ins */
+};
+
+#define UREG_G0        0
+#define UREG_G1        1
+#define UREG_G2        2
+#define UREG_G3        3
+#define UREG_G4        4
+#define UREG_G5        5
+#define UREG_G6        6
+#define UREG_G7        7
+#define UREG_I0        8
+#define UREG_I1        9
+#define UREG_I2        10
+#define UREG_I3        11
+#define UREG_I4        12
+#define UREG_I5        13
+#define UREG_I6        14
+#define UREG_I7        15
+#define UREG_WIM       UREG_G0
+#define UREG_FADDR     UREG_G0
+#define UREG_FP        UREG_I6
+#define UREG_RETPC     UREG_I7
+
+/* A register window */
+struct reg_window {
+	unsigned long locals[8];
+	unsigned long ins[8];
+};
+
+/* A Sparc stack frame */
+struct sparc_stackf {
+	unsigned long locals[8];
+        unsigned long ins[6];
+	struct sparc_stackf *fp;
+	unsigned long callers_pc;
+	char *structptr;
+	unsigned long xargs[6];
+	unsigned long xxargs[1];
+};
+
+#define TRACEREG_SZ   sizeof(struct pt_regs)
+#define STACKFRAME_SZ sizeof(struct sparc_stackf)
+
+#ifdef __KERNEL__
+
+static inline bool pt_regs_is_syscall(struct pt_regs *regs)
+{
+	return (regs->psr & PSR_SYSCALL);
+}
+
+static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
+{
+	return (regs->psr &= ~PSR_SYSCALL);
+}
+
+#define user_mode(regs) (!((regs)->psr & PSR_PS))
+#define instruction_pointer(regs) ((regs)->pc)
+#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
+unsigned long profile_pc(struct pt_regs *);
+extern void show_regs(struct pt_regs *);
+#endif
+
+#else /* __ASSEMBLY__ */
+/* For assembly code. */
+#define TRACEREG_SZ       0x50
+#define STACKFRAME_SZ     0x60
+#endif
+
+/*
+ * The asm-offsets.h is a generated file, so we cannot include it.
+ * It may be OK for glibc headers, but it's utterly pointless for C code.
+ * The assembly code using those offsets has to include it explicitly.
+ */
+/* #include <asm/asm-offsets.h> */
+
+/* These are for pt_regs. */
+#define PT_PSR    0x0
+#define PT_PC     0x4
+#define PT_NPC    0x8
+#define PT_Y      0xc
+#define PT_G0     0x10
+#define PT_WIM    PT_G0
+#define PT_G1     0x14
+#define PT_G2     0x18
+#define PT_G3     0x1c
+#define PT_G4     0x20
+#define PT_G5     0x24
+#define PT_G6     0x28
+#define PT_G7     0x2c
+#define PT_I0     0x30
+#define PT_I1     0x34
+#define PT_I2     0x38
+#define PT_I3     0x3c
+#define PT_I4     0x40
+#define PT_I5     0x44
+#define PT_I6     0x48
+#define PT_FP     PT_I6
+#define PT_I7     0x4c
+
+/* Reg_window offsets */
+#define RW_L0     0x00
+#define RW_L1     0x04
+#define RW_L2     0x08
+#define RW_L3     0x0c
+#define RW_L4     0x10
+#define RW_L5     0x14
+#define RW_L6     0x18
+#define RW_L7     0x1c
+#define RW_I0     0x20
+#define RW_I1     0x24
+#define RW_I2     0x28
+#define RW_I3     0x2c
+#define RW_I4     0x30
+#define RW_I5     0x34
+#define RW_I6     0x38
+#define RW_I7     0x3c
+
+/* Stack_frame offsets */
+#define SF_L0     0x00
+#define SF_L1     0x04
+#define SF_L2     0x08
+#define SF_L3     0x0c
+#define SF_L4     0x10
+#define SF_L5     0x14
+#define SF_L6     0x18
+#define SF_L7     0x1c
+#define SF_I0     0x20
+#define SF_I1     0x24
+#define SF_I2     0x28
+#define SF_I3     0x2c
+#define SF_I4     0x30
+#define SF_I5     0x34
+#define SF_FP     0x38
+#define SF_PC     0x3c
+#define SF_RETP   0x40
+#define SF_XARG0  0x44
+#define SF_XARG1  0x48
+#define SF_XARG2  0x4c
+#define SF_XARG3  0x50
+#define SF_XARG4  0x54
+#define SF_XARG5  0x58
+#define SF_XXARG  0x5c
+
+/* Stuff for the ptrace system call */
+#define PTRACE_SPARC_DETACH       11
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_READDATA           16
+#define PTRACE_WRITEDATA          17
+#define PTRACE_READTEXT           18
+#define PTRACE_WRITETEXT          19
+#define PTRACE_GETFPAREGS         20
+#define PTRACE_SETFPAREGS         21
+
+#endif /* !(_SPARC_PTRACE_H) */
diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h
new file mode 100644
index 000000000000..06e4914c13f4
--- /dev/null
+++ b/arch/sparc/include/asm/ptrace_64.h
@@ -0,0 +1,346 @@
+#ifndef _SPARC64_PTRACE_H
+#define _SPARC64_PTRACE_H
+
+#include <asm/pstate.h>
+
+/* This struct defines the way the registers are stored on the
+ * stack during a system call and basically all traps.
+ */
+
+/* This magic value must have the low 9 bits clear,
+ * as that is where we encode the %tt value, see below.
+ */
+#define PT_REGS_MAGIC 0x57ac6c00
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+struct pt_regs {
+	unsigned long u_regs[16]; /* globals and ins */
+	unsigned long tstate;
+	unsigned long tpc;
+	unsigned long tnpc;
+	unsigned int y;
+
+	/* We encode a magic number, PT_REGS_MAGIC, along
+	 * with the %tt (trap type) register value at trap
+	 * entry time.  The magic number allows us to identify
+	 * accurately a trap stack frame in the stack
+	 * unwinder, and the %tt value allows us to test
+	 * things like "in a system call" etc. for an arbitray
+	 * process.
+	 *
+	 * The PT_REGS_MAGIC is choosen such that it can be
+	 * loaded completely using just a sethi instruction.
+	 */
+	unsigned int magic;
+};
+
+struct pt_regs32 {
+	unsigned int psr;
+	unsigned int pc;
+	unsigned int npc;
+	unsigned int y;
+	unsigned int u_regs[16]; /* globals and ins */
+};
+
+#define UREG_G0        0
+#define UREG_G1        1
+#define UREG_G2        2
+#define UREG_G3        3
+#define UREG_G4        4
+#define UREG_G5        5
+#define UREG_G6        6
+#define UREG_G7        7
+#define UREG_I0        8
+#define UREG_I1        9
+#define UREG_I2        10
+#define UREG_I3        11
+#define UREG_I4        12
+#define UREG_I5        13
+#define UREG_I6        14
+#define UREG_I7        15
+#define UREG_FP        UREG_I6
+#define UREG_RETPC     UREG_I7
+
+/* A V9 register window */
+struct reg_window {
+	unsigned long locals[8];
+	unsigned long ins[8];
+};
+
+/* A 32-bit register window. */
+struct reg_window32 {
+	unsigned int locals[8];
+	unsigned int ins[8];
+};
+
+/* A V9 Sparc stack frame */
+struct sparc_stackf {
+	unsigned long locals[8];
+        unsigned long ins[6];
+	struct sparc_stackf *fp;
+	unsigned long callers_pc;
+	char *structptr;
+	unsigned long xargs[6];
+	unsigned long xxargs[1];
+};
+
+/* A 32-bit Sparc stack frame */
+struct sparc_stackf32 {
+	unsigned int locals[8];
+        unsigned int ins[6];
+	unsigned int fp;
+	unsigned int callers_pc;
+	unsigned int structptr;
+	unsigned int xargs[6];
+	unsigned int xxargs[1];
+};
+
+struct sparc_trapf {
+	unsigned long locals[8];
+	unsigned long ins[8];
+	unsigned long _unused;
+	struct pt_regs *regs;
+};
+
+#define TRACEREG_SZ	sizeof(struct pt_regs)
+#define STACKFRAME_SZ	sizeof(struct sparc_stackf)
+
+#define TRACEREG32_SZ	sizeof(struct pt_regs32)
+#define STACKFRAME32_SZ	sizeof(struct sparc_stackf32)
+
+#ifdef __KERNEL__
+
+static inline int pt_regs_trap_type(struct pt_regs *regs)
+{
+	return regs->magic & 0x1ff;
+}
+
+static inline bool pt_regs_is_syscall(struct pt_regs *regs)
+{
+	return (regs->tstate & TSTATE_SYSCALL);
+}
+
+static inline bool pt_regs_clear_syscall(struct pt_regs *regs)
+{
+	return (regs->tstate &= ~TSTATE_SYSCALL);
+}
+
+struct global_reg_snapshot {
+	unsigned long		tstate;
+	unsigned long		tpc;
+	unsigned long		tnpc;
+	unsigned long		o7;
+	unsigned long		i7;
+	unsigned long		rpc;
+	struct thread_info	*thread;
+	unsigned long		pad1;
+};
+
+#define __ARCH_WANT_COMPAT_SYS_PTRACE
+
+#define force_successful_syscall_return()	    \
+do {	current_thread_info()->syscall_noerror = 1; \
+} while (0)
+#define user_mode(regs) (!((regs)->tstate & TSTATE_PRIV))
+#define instruction_pointer(regs) ((regs)->tpc)
+#define user_stack_pointer(regs) ((regs)->u_regs[UREG_FP])
+#define regs_return_value(regs) ((regs)->u_regs[UREG_I0])
+#ifdef CONFIG_SMP
+extern unsigned long profile_pc(struct pt_regs *);
+#else
+#define profile_pc(regs) instruction_pointer(regs)
+#endif
+extern void show_regs(struct pt_regs *);
+#endif
+
+#else /* __ASSEMBLY__ */
+/* For assembly code. */
+#define TRACEREG_SZ		0xa0
+#define STACKFRAME_SZ		0xc0
+
+#define TRACEREG32_SZ		0x50
+#define STACKFRAME32_SZ		0x60
+#endif
+
+#ifdef __KERNEL__
+#define STACK_BIAS		2047
+#endif
+
+/* These are for pt_regs. */
+#define PT_V9_G0     0x00
+#define PT_V9_G1     0x08
+#define PT_V9_G2     0x10
+#define PT_V9_G3     0x18
+#define PT_V9_G4     0x20
+#define PT_V9_G5     0x28
+#define PT_V9_G6     0x30
+#define PT_V9_G7     0x38
+#define PT_V9_I0     0x40
+#define PT_V9_I1     0x48
+#define PT_V9_I2     0x50
+#define PT_V9_I3     0x58
+#define PT_V9_I4     0x60
+#define PT_V9_I5     0x68
+#define PT_V9_I6     0x70
+#define PT_V9_FP     PT_V9_I6
+#define PT_V9_I7     0x78
+#define PT_V9_TSTATE 0x80
+#define PT_V9_TPC    0x88
+#define PT_V9_TNPC   0x90
+#define PT_V9_Y      0x98
+#define PT_V9_MAGIC  0x9c
+#define PT_TSTATE	PT_V9_TSTATE
+#define PT_TPC		PT_V9_TPC
+#define PT_TNPC		PT_V9_TNPC
+
+/* These for pt_regs32. */
+#define PT_PSR    0x0
+#define PT_PC     0x4
+#define PT_NPC    0x8
+#define PT_Y      0xc
+#define PT_G0     0x10
+#define PT_WIM    PT_G0
+#define PT_G1     0x14
+#define PT_G2     0x18
+#define PT_G3     0x1c
+#define PT_G4     0x20
+#define PT_G5     0x24
+#define PT_G6     0x28
+#define PT_G7     0x2c
+#define PT_I0     0x30
+#define PT_I1     0x34
+#define PT_I2     0x38
+#define PT_I3     0x3c
+#define PT_I4     0x40
+#define PT_I5     0x44
+#define PT_I6     0x48
+#define PT_FP     PT_I6
+#define PT_I7     0x4c
+
+/* Reg_window offsets */
+#define RW_V9_L0     0x00
+#define RW_V9_L1     0x08
+#define RW_V9_L2     0x10
+#define RW_V9_L3     0x18
+#define RW_V9_L4     0x20
+#define RW_V9_L5     0x28
+#define RW_V9_L6     0x30
+#define RW_V9_L7     0x38
+#define RW_V9_I0     0x40
+#define RW_V9_I1     0x48
+#define RW_V9_I2     0x50
+#define RW_V9_I3     0x58
+#define RW_V9_I4     0x60
+#define RW_V9_I5     0x68
+#define RW_V9_I6     0x70
+#define RW_V9_I7     0x78
+
+#define RW_L0     0x00
+#define RW_L1     0x04
+#define RW_L2     0x08
+#define RW_L3     0x0c
+#define RW_L4     0x10
+#define RW_L5     0x14
+#define RW_L6     0x18
+#define RW_L7     0x1c
+#define RW_I0     0x20
+#define RW_I1     0x24
+#define RW_I2     0x28
+#define RW_I3     0x2c
+#define RW_I4     0x30
+#define RW_I5     0x34
+#define RW_I6     0x38
+#define RW_I7     0x3c
+
+/* Stack_frame offsets */
+#define SF_V9_L0     0x00
+#define SF_V9_L1     0x08
+#define SF_V9_L2     0x10
+#define SF_V9_L3     0x18
+#define SF_V9_L4     0x20
+#define SF_V9_L5     0x28
+#define SF_V9_L6     0x30
+#define SF_V9_L7     0x38
+#define SF_V9_I0     0x40
+#define SF_V9_I1     0x48
+#define SF_V9_I2     0x50
+#define SF_V9_I3     0x58
+#define SF_V9_I4     0x60
+#define SF_V9_I5     0x68
+#define SF_V9_FP     0x70
+#define SF_V9_PC     0x78
+#define SF_V9_RETP   0x80
+#define SF_V9_XARG0  0x88
+#define SF_V9_XARG1  0x90
+#define SF_V9_XARG2  0x98
+#define SF_V9_XARG3  0xa0
+#define SF_V9_XARG4  0xa8
+#define SF_V9_XARG5  0xb0
+#define SF_V9_XXARG  0xb8
+
+#define SF_L0     0x00
+#define SF_L1     0x04
+#define SF_L2     0x08
+#define SF_L3     0x0c
+#define SF_L4     0x10
+#define SF_L5     0x14
+#define SF_L6     0x18
+#define SF_L7     0x1c
+#define SF_I0     0x20
+#define SF_I1     0x24
+#define SF_I2     0x28
+#define SF_I3     0x2c
+#define SF_I4     0x30
+#define SF_I5     0x34
+#define SF_FP     0x38
+#define SF_PC     0x3c
+#define SF_RETP   0x40
+#define SF_XARG0  0x44
+#define SF_XARG1  0x48
+#define SF_XARG2  0x4c
+#define SF_XARG3  0x50
+#define SF_XARG4  0x54
+#define SF_XARG5  0x58
+#define SF_XXARG  0x5c
+
+#ifdef __KERNEL__
+
+/* global_reg_snapshot offsets */
+#define GR_SNAP_TSTATE	0x00
+#define GR_SNAP_TPC	0x08
+#define GR_SNAP_TNPC	0x10
+#define GR_SNAP_O7	0x18
+#define GR_SNAP_I7	0x20
+#define GR_SNAP_RPC	0x28
+#define GR_SNAP_THREAD	0x30
+#define GR_SNAP_PAD1	0x38
+
+#endif  /*  __KERNEL__  */
+
+/* Stuff for the ptrace system call */
+#define PTRACE_SPARC_DETACH       11
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+#define PTRACE_READDATA           16
+#define PTRACE_WRITEDATA          17
+#define PTRACE_READTEXT           18
+#define PTRACE_WRITETEXT          19
+#define PTRACE_GETFPAREGS         20
+#define PTRACE_SETFPAREGS         21
+
+/* There are for debugging 64-bit processes, either from a 32 or 64 bit
+ * parent.  Thus their complements are for debugging 32-bit processes only.
+ */
+
+#define PTRACE_GETREGS64	  22
+#define PTRACE_SETREGS64	  23
+/* PTRACE_SYSCALL is 24 */
+#define PTRACE_GETFPREGS64	  25
+#define PTRACE_SETFPREGS64	  26
+
+#endif /* !(_SPARC64_PTRACE_H) */
diff --git a/arch/sparc/include/asm/reboot.h b/arch/sparc/include/asm/reboot.h
new file mode 100644
index 000000000000..3f3f43f5be5e
--- /dev/null
+++ b/arch/sparc/include/asm/reboot.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC64_REBOOT_H
+#define _SPARC64_REBOOT_H
+
+extern void machine_alt_power_off(void);
+
+#endif /* _SPARC64_REBOOT_H */
diff --git a/arch/sparc/include/asm/reg.h b/arch/sparc/include/asm/reg.h
new file mode 100644
index 000000000000..0c16e19cae4d
--- /dev/null
+++ b/arch/sparc/include/asm/reg.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_REG_H
+#define ___ASM_SPARC_REG_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/reg_64.h>
+#else
+#include <asm/reg_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/reg_32.h b/arch/sparc/include/asm/reg_32.h
new file mode 100644
index 000000000000..1efb056fb3d1
--- /dev/null
+++ b/arch/sparc/include/asm/reg_32.h
@@ -0,0 +1,79 @@
+/*
+ * linux/include/asm/reg.h
+ * Layout of the registers as expected by gdb on the Sparc
+ * we should replace the user.h definitions with those in
+ * this file, we don't even use the other
+ * -miguel
+ *
+ * The names of the structures, constants and aliases in this file
+ * have the same names as the sunos ones, some programs rely on these
+ * names (gdb for example).
+ *
+ */
+
+#ifndef __SPARC_REG_H
+#define __SPARC_REG_H
+
+struct regs {
+	int     r_psr;
+#define r_ps r_psr
+        int     r_pc;
+        int     r_npc;
+        int     r_y;
+        int     r_g1;
+        int     r_g2;
+        int     r_g3;
+        int     r_g4;
+        int     r_g5;
+        int     r_g6;
+        int     r_g7;
+        int     r_o0;
+        int     r_o1;
+        int     r_o2;
+        int     r_o3;
+        int     r_o4;
+        int     r_o5;
+        int     r_o6;
+        int     r_o7;
+};
+
+struct fpq {
+        unsigned long *addr;
+        unsigned long instr;
+};
+
+struct  fq {
+        union {
+                double  whole;
+                struct  fpq fpq;
+        } FQu;
+};
+
+#define FPU_REGS_TYPE unsigned int
+#define FPU_FSR_TYPE unsigned
+
+struct fp_status {
+        union {
+                FPU_REGS_TYPE Fpu_regs[32];
+                double  Fpu_dregs[16];
+        } fpu_fr;
+        FPU_FSR_TYPE Fpu_fsr;
+        unsigned Fpu_flags;
+        unsigned Fpu_extra;
+        unsigned Fpu_qcnt;
+        struct fq Fpu_q[16];
+};
+
+#define fpu_regs  f_fpstatus.fpu_fr.Fpu_regs
+#define fpu_dregs f_fpstatus.fpu_fr.Fpu_dregs
+#define fpu_fsr   f_fpstatus.Fpu_fsr
+#define fpu_flags f_fpstatus.Fpu_flags
+#define fpu_extra f_fpstatus.Fpu_extra
+#define fpu_q     f_fpstatus.Fpu_q
+#define fpu_qcnt  f_fpstatus.Fpu_qcnt
+
+struct fpu {
+        struct fp_status f_fpstatus;
+};
+
+#endif /* __SPARC_REG_H */
diff --git a/arch/sparc/include/asm/reg_64.h b/arch/sparc/include/asm/reg_64.h
new file mode 100644
index 000000000000..6f277d7c7d88
--- /dev/null
+++ b/arch/sparc/include/asm/reg_64.h
@@ -0,0 +1,56 @@
+/*
+ * linux/asm/reg.h
+ * Layout of the registers as expected by gdb on the Sparc
+ * we should replace the user.h definitions with those in
+ * this file, we don't even use the other
+ * -miguel
+ *
+ * The names of the structures, constants and aliases in this file
+ * have the same names as the sunos ones, some programs rely on these
+ * names (gdb for example).
+ *
+ */
+
+#ifndef __SPARC64_REG_H
+#define __SPARC64_REG_H
+
+struct regs {
+        unsigned long r_g1;
+        unsigned long r_g2;
+        unsigned long r_g3;
+        unsigned long r_g4;
+        unsigned long r_g5;
+        unsigned long r_g6;
+        unsigned long r_g7;
+        unsigned long r_o0;
+        unsigned long r_o1;
+        unsigned long r_o2;
+        unsigned long r_o3;
+        unsigned long r_o4;
+        unsigned long r_o5;
+        unsigned long r_o6;
+        unsigned long r_o7;
+        unsigned long __pad;
+        unsigned long r_tstate;
+        unsigned long r_tpc;
+        unsigned long r_tnpc;
+        unsigned int  r_y;
+        unsigned int  r_fprs;
+};
+
+#define FPU_REGS_TYPE unsigned int
+#define FPU_FSR_TYPE unsigned long
+
+struct fp_status {
+        unsigned long fpu_fr[32];
+        unsigned long Fpu_fsr;
+};
+
+struct fpu {
+	struct fp_status f_fpstatus;
+};
+
+#define fpu_regs  f_fpstatus.fpu_fr
+#define fpu_fsr   f_fpstatus.Fpu_fsr
+
+#endif /* __SPARC64_REG_H */
diff --git a/arch/sparc/include/asm/resource.h b/arch/sparc/include/asm/resource.h
new file mode 100644
index 000000000000..fe163cafb4c7
--- /dev/null
+++ b/arch/sparc/include/asm/resource.h
@@ -0,0 +1,30 @@
+/*
+ * resource.h: Resource definitions.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_RESOURCE_H
+#define _SPARC_RESOURCE_H
+
+/*
+ * These two resource limit IDs have a Sparc/Linux-specific ordering,
+ * the rest comes from the generic header:
+ */
+#define RLIMIT_NOFILE		6	/* max number of open files */
+#define RLIMIT_NPROC		7	/* max number of processes */
+
+#if defined(__sparc__) && defined(__arch64__)
+/* Use generic version */
+#else
+/*
+ * SuS says limits have to be unsigned.
+ * We make this unsigned, but keep the
+ * old value for compatibility:
+ */
+#define RLIM_INFINITY		0x7fffffff
+#endif
+
+#include <asm-generic/resource.h>
+
+#endif /* !(_SPARC_RESOURCE_H) */
diff --git a/arch/sparc/include/asm/ross.h b/arch/sparc/include/asm/ross.h
new file mode 100644
index 000000000000..ecb6e81786a6
--- /dev/null
+++ b/arch/sparc/include/asm/ross.h
@@ -0,0 +1,191 @@
+/*
+ * ross.h: Ross module specific definitions and defines.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_ROSS_H
+#define _SPARC_ROSS_H
+
+#include <asm/asi.h>
+#include <asm/page.h>
+
+/* Ross made Hypersparcs have a %psr 'impl' field of '0001'.  The 'vers'
+ * field has '1111'.
+ */
+
+/* The MMU control register fields on the HyperSparc.
+ *
+ * -----------------------------------------------------------------
+ * |implvers| RSV |CWR|SE|WBE| MID |BM| C|CS|MR|CM|RSV|CE|RSV|NF|ME|
+ * -----------------------------------------------------------------
+ *  31    24 23-22 21  20  19 18-15 14 13 12 11 10  9   8 7-2  1  0
+ *
+ * Phew, lots of fields there ;-)
+ *
+ * CWR: Cache Wrapping Enabled, if one cache wrapping is on.
+ * SE: Snoop Enable, turns on bus snooping for cache activity if one.
+ * WBE: Write Buffer Enable, one turns it on.
+ * MID: The ModuleID of the chip for MBus transactions.
+ * BM: Boot-Mode. One indicates the MMU is in boot mode.
+ * C: Indicates whether accesses are cachable while the MMU is
+ *    disabled.
+ * CS: Cache Size -- 0 = 128k, 1 = 256k
+ * MR: Memory Reflection, one indicates that the memory bus connected
+ *     to the MBus supports memory reflection.
+ * CM: Cache Mode -- 0 = write-through, 1 = copy-back
+ * CE: Cache Enable -- 0 = no caching, 1 = cache is on
+ * NF: No Fault -- 0 = faults trap the CPU from supervisor mode
+ *                 1 = faults from supervisor mode do not generate traps
+ * ME: MMU Enable -- 0 = MMU is off, 1 = MMU is on
+ */
+
+#define HYPERSPARC_CWENABLE   0x00200000
+#define HYPERSPARC_SBENABLE   0x00100000
+#define HYPERSPARC_WBENABLE   0x00080000
+#define HYPERSPARC_MIDMASK    0x00078000
+#define HYPERSPARC_BMODE      0x00004000
+#define HYPERSPARC_ACENABLE   0x00002000
+#define HYPERSPARC_CSIZE      0x00001000
+#define HYPERSPARC_MRFLCT     0x00000800
+#define HYPERSPARC_CMODE      0x00000400
+#define HYPERSPARC_CENABLE    0x00000100
+#define HYPERSPARC_NFAULT     0x00000002
+#define HYPERSPARC_MENABLE    0x00000001
+
+
+/* The ICCR instruction cache register on the HyperSparc.
+ *
+ * -----------------------------------------------
+ * |                                 | FTD | ICE |
+ * -----------------------------------------------
+ *  31                                  1     0
+ *
+ * This register is accessed using the V8 'wrasr' and 'rdasr'
+ * opcodes, since not all assemblers understand them and those
+ * that do use different semantics I will just hard code the
+ * instruction with a '.word' statement.
+ *
+ * FTD:  If set to one flush instructions executed during an
+ *       instruction cache hit occurs, the corresponding line
+ *       for said cache-hit is invalidated.  If FTD is zero,
+ *       an unimplemented 'flush' trap will occur when any
+ *       flush is executed by the processor.
+ *
+ * ICE:  If set to one, the instruction cache is enabled.  If
+ *       zero, the cache will not be used for instruction fetches.
+ *
+ * All other bits are read as zeros, and writes to them have no
+ * effect.
+ *
+ * Wheee, not many assemblers understand the %iccr register nor
+ * the generic asr r/w instructions.
+ *
+ *  1000 0011 0100 0111 1100 0000 0000 0000   ! rd %iccr, %g1
+ *
+ * 0x  8    3    4    7    c    0    0    0   ! 0x8347c000
+ *
+ *  1011 1111 1000 0000 0110 0000 0000 0000   ! wr %g1, 0x0, %iccr
+ *
+ * 0x  b    f    8    0    6    0    0    0   ! 0xbf806000
+ *
+ */
+
+#define HYPERSPARC_ICCR_FTD     0x00000002
+#define HYPERSPARC_ICCR_ICE     0x00000001
+
+#ifndef __ASSEMBLY__
+
+static inline unsigned int get_ross_icr(void)
+{
+	unsigned int icreg;
+
+	__asm__ __volatile__(".word 0x8347c000\n\t" /* rd %iccr, %g1 */
+			     "mov %%g1, %0\n\t"
+			     : "=r" (icreg)
+			     : /* no inputs */
+			     : "g1", "memory");
+
+	return icreg;
+}
+
+static inline void put_ross_icr(unsigned int icreg)
+{
+	__asm__ __volatile__("or %%g0, %0, %%g1\n\t"
+			     ".word 0xbf806000\n\t" /* wr %g1, 0x0, %iccr */
+			     "nop\n\t"
+			     "nop\n\t"
+			     "nop\n\t"
+			     : /* no outputs */
+			     : "r" (icreg)
+			     : "g1", "memory");
+
+	return;
+}
+
+/* HyperSparc specific cache flushing. */
+
+/* This is for the on-chip instruction cache. */
+static inline void hyper_flush_whole_icache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_FLUSH_IWHOLE)
+			     : "memory");
+	return;
+}
+
+extern int vac_cache_size;
+extern int vac_line_size;
+
+static inline void hyper_clear_all_tags(void)
+{
+	unsigned long addr;
+
+	for(addr = 0; addr < vac_cache_size; addr += vac_line_size)
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (addr), "i" (ASI_M_DATAC_TAG)
+				     : "memory");
+}
+
+static inline void hyper_flush_unconditional_combined(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < vac_cache_size; addr += vac_line_size)
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (addr), "i" (ASI_M_FLUSH_CTX)
+				     : "memory");
+}
+
+static inline void hyper_flush_cache_user(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < vac_cache_size; addr += vac_line_size)
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (addr), "i" (ASI_M_FLUSH_USER)
+				     : "memory");
+}
+
+static inline void hyper_flush_cache_page(unsigned long page)
+{
+	unsigned long end;
+
+	page &= PAGE_MASK;
+	end = page + PAGE_SIZE;
+	while (page < end) {
+		__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+				     : /* no outputs */
+				     : "r" (page), "i" (ASI_M_FLUSH_PAGE)
+				     : "memory");
+		page += vac_line_size;
+	}
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC_ROSS_H) */
diff --git a/arch/sparc/include/asm/rtc.h b/arch/sparc/include/asm/rtc.h
new file mode 100644
index 000000000000..f9ecb1fe2ecd
--- /dev/null
+++ b/arch/sparc/include/asm/rtc.h
@@ -0,0 +1,26 @@
+/*
+ * rtc.h: Definitions for access to the Mostek real time clock
+ *
+ * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
+ */
+
+#ifndef _RTC_H
+#define _RTC_H
+
+#include <linux/ioctl.h>
+
+struct rtc_time
+{
+	int	sec;	/* Seconds (0-59) */
+	int	min;	/* Minutes (0-59) */
+	int	hour;	/* Hour (0-23) */
+	int	dow;	/* Day of the week (1-7) */
+	int	dom;	/* Day of the month (1-31) */
+	int	month;	/* Month of year (1-12) */
+	int	year;	/* Year (0-99) */
+};
+
+#define RTCGET _IOR('p', 20, struct rtc_time)
+#define RTCSET _IOW('p', 21, struct rtc_time)
+
+#endif
diff --git a/arch/sparc/include/asm/rwsem-const.h b/arch/sparc/include/asm/rwsem-const.h
new file mode 100644
index 000000000000..a303c9d64d84
--- /dev/null
+++ b/arch/sparc/include/asm/rwsem-const.h
@@ -0,0 +1,12 @@
+/* rwsem-const.h: RW semaphore counter constants.  */
+#ifndef _SPARC64_RWSEM_CONST_H
+#define _SPARC64_RWSEM_CONST_H
+
+#define RWSEM_UNLOCKED_VALUE		0x00000000
+#define RWSEM_ACTIVE_BIAS		0x00000001
+#define RWSEM_ACTIVE_MASK		0x0000ffff
+#define RWSEM_WAITING_BIAS		0xffff0000
+#define RWSEM_ACTIVE_READ_BIAS		RWSEM_ACTIVE_BIAS
+#define RWSEM_ACTIVE_WRITE_BIAS		(RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
+
+#endif /* _SPARC64_RWSEM_CONST_H */
diff --git a/arch/sparc/include/asm/rwsem.h b/arch/sparc/include/asm/rwsem.h
new file mode 100644
index 000000000000..1dc129ac2feb
--- /dev/null
+++ b/arch/sparc/include/asm/rwsem.h
@@ -0,0 +1,84 @@
+/*
+ * rwsem.h: R/W semaphores implemented using CAS
+ *
+ * Written by David S. Miller (davem@redhat.com), 2001.
+ * Derived from asm-i386/rwsem.h
+ */
+#ifndef _SPARC64_RWSEM_H
+#define _SPARC64_RWSEM_H
+
+#ifndef _LINUX_RWSEM_H
+#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead"
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <asm/rwsem-const.h>
+
+struct rwsem_waiter;
+
+struct rw_semaphore {
+	signed int count;
+	spinlock_t		wait_lock;
+	struct list_head	wait_list;
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+	struct lockdep_map	dep_map;
+#endif
+};
+
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
+#else
+# define __RWSEM_DEP_MAP_INIT(lockname)
+#endif
+
+#define __RWSEM_INITIALIZER(name) \
+{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, LIST_HEAD_INIT((name).wait_list) \
+  __RWSEM_DEP_MAP_INIT(name) }
+
+#define DECLARE_RWSEM(name) \
+	struct rw_semaphore name = __RWSEM_INITIALIZER(name)
+
+extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
+			 struct lock_class_key *key);
+
+#define init_rwsem(sem)						\
+do {								\
+	static struct lock_class_key __key;			\
+								\
+	__init_rwsem((sem), #sem, &__key);			\
+} while (0)
+
+extern void __down_read(struct rw_semaphore *sem);
+extern int __down_read_trylock(struct rw_semaphore *sem);
+extern void __down_write(struct rw_semaphore *sem);
+extern int __down_write_trylock(struct rw_semaphore *sem);
+extern void __up_read(struct rw_semaphore *sem);
+extern void __up_write(struct rw_semaphore *sem);
+extern void __downgrade_write(struct rw_semaphore *sem);
+
+static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
+{
+	__down_write(sem);
+}
+
+static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem)
+{
+	return atomic_add_return(delta, (atomic_t *)(&sem->count));
+}
+
+static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem)
+{
+	atomic_add(delta, (atomic_t *)(&sem->count));
+}
+
+static inline int rwsem_is_locked(struct rw_semaphore *sem)
+{
+	return (sem->count != 0);
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _SPARC64_RWSEM_H */
diff --git a/arch/sparc/include/asm/sbi.h b/arch/sparc/include/asm/sbi.h
new file mode 100644
index 000000000000..5eb7f1965d33
--- /dev/null
+++ b/arch/sparc/include/asm/sbi.h
@@ -0,0 +1,115 @@
+/*
+ * sbi.h:  SBI (Sbus Interface on sun4d) definitions
+ *
+ * Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
+ */
+
+#ifndef _SPARC_SBI_H
+#define _SPARC_SBI_H
+
+#include <asm/obio.h>
+
+/* SBI */
+struct sbi_regs {
+/* 0x0000 */	u32		cid;		/* Component ID */
+/* 0x0004 */	u32		ctl;		/* Control */
+/* 0x0008 */	u32		status;		/* Status */
+		u32		_unused1;
+		
+/* 0x0010 */	u32		cfg0;		/* Slot0 config reg */
+/* 0x0014 */	u32		cfg1;		/* Slot1 config reg */
+/* 0x0018 */	u32		cfg2;		/* Slot2 config reg */
+/* 0x001c */	u32		cfg3;		/* Slot3 config reg */
+
+/* 0x0020 */	u32		stb0;		/* Streaming buf control for slot 0 */
+/* 0x0024 */	u32		stb1;		/* Streaming buf control for slot 1 */
+/* 0x0028 */	u32		stb2;		/* Streaming buf control for slot 2 */
+/* 0x002c */	u32		stb3;		/* Streaming buf control for slot 3 */
+
+/* 0x0030 */	u32		intr_state;	/* Interrupt state */
+/* 0x0034 */	u32		intr_tid;	/* Interrupt target ID */
+/* 0x0038 */	u32		intr_diag;	/* Interrupt diagnostics */
+};
+
+#define SBI_CID			0x02800000
+#define SBI_CTL			0x02800004
+#define SBI_STATUS		0x02800008
+#define SBI_CFG0		0x02800010
+#define SBI_CFG1		0x02800014
+#define SBI_CFG2		0x02800018
+#define SBI_CFG3		0x0280001c
+#define SBI_STB0		0x02800020
+#define SBI_STB1		0x02800024
+#define SBI_STB2		0x02800028
+#define SBI_STB3		0x0280002c
+#define SBI_INTR_STATE		0x02800030
+#define SBI_INTR_TID		0x02800034
+#define SBI_INTR_DIAG		0x02800038
+
+/* Burst bits for 8, 16, 32, 64 are in cfgX registers at bits 2, 3, 4, 5 respectively */
+#define SBI_CFG_BURST_MASK	0x0000001e
+
+/* How to make devid from sbi no */
+#define SBI2DEVID(sbino) ((sbino<<4)|2)
+
+/* intr_state has 4 bits for slots 0 .. 3 and these bits are repeated for each sbus irq level
+ *
+ *		   +-------+-------+-------+-------+-------+-------+-------+-------+
+ *  SBUS IRQ LEVEL |   7   |   6   |   5   |   4   |   3   |   2   |   1   |       |
+ *		   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Reser |
+ *  SLOT #         |3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|3|2|1|0|  ved  |
+ *                 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-------+
+ *  Bits           31      27      23      19      15      11      7       3      0
+ */
+
+
+#ifndef __ASSEMBLY__
+
+static inline int acquire_sbi(int devid, int mask)
+{
+	__asm__ __volatile__ ("swapa [%2] %3, %0" :
+			      "=r" (mask) :
+			      "0" (mask),
+			      "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE),
+			      "i" (ASI_M_CTL));
+	return mask;
+}
+
+static inline void release_sbi(int devid, int mask)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (mask),
+			      "r" (ECSR_DEV_BASE(devid) | SBI_INTR_STATE),
+			      "i" (ASI_M_CTL));
+}
+
+static inline void set_sbi_tid(int devid, int targetid)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (targetid),
+			      "r" (ECSR_DEV_BASE(devid) | SBI_INTR_TID),
+			      "i" (ASI_M_CTL));
+}
+
+static inline int get_sbi_ctl(int devid, int cfgno)
+{
+	int cfg;
+	
+	__asm__ __volatile__ ("lda [%1] %2, %0" :
+			      "=r" (cfg) :
+			      "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)),
+			      "i" (ASI_M_CTL));
+	return cfg;
+}
+
+static inline void set_sbi_ctl(int devid, int cfgno, int cfg)
+{
+	__asm__ __volatile__ ("sta %0, [%1] %2" : :
+			      "r" (cfg),
+			      "r" ((ECSR_DEV_BASE(devid) | SBI_CFG0) + (cfgno<<2)),
+			      "i" (ASI_M_CTL));
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_SBI_H) */
diff --git a/arch/sparc/include/asm/sbus.h b/arch/sparc/include/asm/sbus.h
new file mode 100644
index 000000000000..f82481ab44db
--- /dev/null
+++ b/arch/sparc/include/asm/sbus.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SBUS_H
+#define ___ASM_SPARC_SBUS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sbus_64.h>
+#else
+#include <asm/sbus_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/sbus_32.h b/arch/sparc/include/asm/sbus_32.h
new file mode 100644
index 000000000000..77b5d3aadc99
--- /dev/null
+++ b/arch/sparc/include/asm/sbus_32.h
@@ -0,0 +1,153 @@
+/*
+ * sbus.h:  Defines for the Sun SBus.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SBUS_H
+#define _SPARC_SBUS_H
+
+#include <linux/dma-mapping.h>
+#include <linux/ioport.h>
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+#include <asm/scatterlist.h>
+
+/* We scan which devices are on the SBus using the PROM node device
+ * tree.  SBus devices are described in two different ways.  You can
+ * either get an absolute address at which to access the device, or
+ * you can get a SBus 'slot' number and an offset within that slot.
+ */
+
+/* The base address at which to calculate device OBIO addresses. */
+#define SUN_SBUS_BVADDR        0xf8000000
+#define SBUS_OFF_MASK          0x01ffffff
+
+/* These routines are used to calculate device address from slot
+ * numbers + offsets, and vice versa.
+ */
+
+static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset)
+{
+  return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset));
+}
+
+static inline int sbus_dev_slot(unsigned long dev_addr)
+{
+  return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25);
+}
+
+struct sbus_bus;
+
+/* Linux SBUS device tables */
+struct sbus_dev {
+	struct of_device	ofdev;
+	struct sbus_bus		*bus;
+	struct sbus_dev		*next;
+	struct sbus_dev		*child;
+	struct sbus_dev		*parent;
+	int prom_node;
+	char prom_name[64];
+	int slot;
+
+	struct resource resource[PROMREG_MAX];
+
+	struct linux_prom_registers reg_addrs[PROMREG_MAX];
+	int num_registers;
+
+	struct linux_prom_ranges device_ranges[PROMREG_MAX];
+	int num_device_ranges;
+
+	unsigned int irqs[4];
+	int num_irqs;
+};
+#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
+
+/* This struct describes the SBus(s) found on this machine. */
+struct sbus_bus {
+	struct of_device	ofdev;
+	struct sbus_dev		*devices;	/* Link to devices on this SBus */
+	struct sbus_bus		*next;		/* next SBus, if more than one SBus */
+	int			prom_node;	/* PROM device tree node for this SBus */
+	char			prom_name[64];  /* Usually "sbus" or "sbi" */
+	int			clock_freq;
+
+	struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
+	int num_sbus_ranges;
+
+	int devid;
+	int board;
+};
+#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
+
+extern struct sbus_bus *sbus_root;
+
+static inline int
+sbus_is_slave(struct sbus_dev *dev)
+{
+	/* XXX Have to write this for sun4c's */
+	return 0;
+}
+
+/* Device probing routines could find these handy */
+#define for_each_sbus(bus) \
+        for((bus) = sbus_root; (bus); (bus)=(bus)->next)
+
+#define for_each_sbusdev(device, bus) \
+        for((device) = (bus)->devices; (device); (device)=(device)->next)
+
+#define for_all_sbusdev(device, bus) \
+	for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
+		for ((device) = (bus)->devices; (device); (device) = (device)->next)
+
+/* Driver DVMA interfaces. */
+#define sbus_can_dma_64bit(sdev)	(0) /* actually, sparc_cpu_model==sun4d */
+#define sbus_can_burst64(sdev)		(0) /* actually, sparc_cpu_model==sun4d */
+extern void sbus_set_sbus64(struct sbus_dev *, int);
+extern void sbus_fill_device_irq(struct sbus_dev *);
+
+/* These yield IOMMU mappings in consistent mode. */
+extern void *sbus_alloc_consistent(struct sbus_dev *, long, u32 *dma_addrp);
+extern void sbus_free_consistent(struct sbus_dev *, long, void *, u32);
+void prom_adjust_ranges(struct linux_prom_ranges *, int,
+			struct linux_prom_ranges *, int);
+
+#define SBUS_DMA_BIDIRECTIONAL	DMA_BIDIRECTIONAL
+#define SBUS_DMA_TODEVICE	DMA_TO_DEVICE
+#define SBUS_DMA_FROMDEVICE	DMA_FROM_DEVICE
+#define	SBUS_DMA_NONE		DMA_NONE
+
+/* All the rest use streaming mode mappings. */
+extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int);
+extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int);
+extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int);
+extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int);
+
+/* Finally, allow explicit synchronization of streamable mappings. */
+extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int);
+#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
+extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int);
+extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int);
+#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
+extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int);
+
+/* Eric Brower (ebrower@usa.net)
+ * Translate SBus interrupt levels to ino values--
+ * this is used when converting sbus "interrupts" OBP
+ * node values to "intr" node values, and is platform
+ * dependent.  If only we could call OBP with
+ * "sbus-intr>cpu (sbint -- ino)" from kernel...
+ * See .../drivers/sbus/sbus.c for details.
+ */
+BTFIXUPDEF_CALL(unsigned int, sbint_to_irq, struct sbus_dev *sdev, unsigned int)
+#define sbint_to_irq(sdev, sbint) BTFIXUP_CALL(sbint_to_irq)(sdev, sbint)
+
+extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
+extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
+extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *);
+extern int sbus_arch_preinit(void);
+extern void sbus_arch_postinit(void);
+
+#endif /* !(_SPARC_SBUS_H) */
diff --git a/arch/sparc/include/asm/sbus_64.h b/arch/sparc/include/asm/sbus_64.h
new file mode 100644
index 000000000000..0e16b6dd7e96
--- /dev/null
+++ b/arch/sparc/include/asm/sbus_64.h
@@ -0,0 +1,190 @@
+/* sbus.h: Defines for the Sun SBus.
+ *
+ * Copyright (C) 1996, 1999, 2007 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_SBUS_H
+#define _SPARC64_SBUS_H
+
+#include <linux/dma-mapping.h>
+#include <linux/ioport.h>
+
+#include <asm/oplib.h>
+#include <asm/prom.h>
+#include <asm/of_device.h>
+#include <asm/iommu.h>
+#include <asm/scatterlist.h>
+
+/* We scan which devices are on the SBus using the PROM node device
+ * tree.  SBus devices are described in two different ways.  You can
+ * either get an absolute address at which to access the device, or
+ * you can get a SBus 'slot' number and an offset within that slot.
+ */
+
+/* The base address at which to calculate device OBIO addresses. */
+#define SUN_SBUS_BVADDR        0x00000000
+#define SBUS_OFF_MASK          0x0fffffff
+
+/* These routines are used to calculate device address from slot
+ * numbers + offsets, and vice versa.
+ */
+
+static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset)
+{
+  return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<28)+(offset));
+}
+
+static inline int sbus_dev_slot(unsigned long dev_addr)
+{
+  return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>28);
+}
+
+struct sbus_bus;
+
+/* Linux SBUS device tables */
+struct sbus_dev {
+	struct of_device	ofdev;
+	struct sbus_bus		*bus;
+	struct sbus_dev		*next;
+	struct sbus_dev		*child;
+	struct sbus_dev		*parent;
+	int prom_node;
+	char prom_name[64];
+	int slot;
+
+	struct resource resource[PROMREG_MAX];
+
+	struct linux_prom_registers reg_addrs[PROMREG_MAX];
+	int num_registers;
+
+	struct linux_prom_ranges device_ranges[PROMREG_MAX];
+	int num_device_ranges;
+
+	unsigned int irqs[4];
+	int num_irqs;
+};
+#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev)
+
+/* This struct describes the SBus(s) found on this machine. */
+struct sbus_bus {
+	struct of_device	ofdev;
+	struct sbus_dev		*devices;	/* Tree of SBUS devices	*/
+	struct sbus_bus		*next;		/* Next SBUS in system	*/
+	int			prom_node;      /* OBP node of SBUS	*/
+	char			prom_name[64];	/* Usually "sbus" or "sbi" */
+	int			clock_freq;
+
+	struct linux_prom_ranges sbus_ranges[PROMREG_MAX];
+	int num_sbus_ranges;
+
+	int portid;
+};
+#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev)
+
+extern struct sbus_bus *sbus_root;
+
+/* Device probing routines could find these handy */
+#define for_each_sbus(bus) \
+        for((bus) = sbus_root; (bus); (bus)=(bus)->next)
+
+#define for_each_sbusdev(device, bus) \
+        for((device) = (bus)->devices; (device); (device)=(device)->next)
+
+#define for_all_sbusdev(device, bus) \
+	for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \
+		for ((device) = (bus)->devices; (device); (device) = (device)->next)
+
+/* Driver DVMA interfaces. */
+#define sbus_can_dma_64bit(sdev)	(1)
+#define sbus_can_burst64(sdev)		(1)
+extern void sbus_set_sbus64(struct sbus_dev *, int);
+extern void sbus_fill_device_irq(struct sbus_dev *);
+
+static inline void *sbus_alloc_consistent(struct sbus_dev *sdev , size_t size,
+					  dma_addr_t *dma_handle)
+{
+	return dma_alloc_coherent(&sdev->ofdev.dev, size,
+				  dma_handle, GFP_ATOMIC);
+}
+
+static inline void sbus_free_consistent(struct sbus_dev *sdev, size_t size,
+					void *vaddr, dma_addr_t dma_handle)
+{
+	return dma_free_coherent(&sdev->ofdev.dev, size, vaddr, dma_handle);
+}
+
+#define SBUS_DMA_BIDIRECTIONAL	DMA_BIDIRECTIONAL
+#define SBUS_DMA_TODEVICE	DMA_TO_DEVICE
+#define SBUS_DMA_FROMDEVICE	DMA_FROM_DEVICE
+#define	SBUS_DMA_NONE		DMA_NONE
+
+/* All the rest use streaming mode mappings. */
+static inline dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *ptr,
+					 size_t size, int direction)
+{
+	return dma_map_single(&sdev->ofdev.dev, ptr, size,
+			      (enum dma_data_direction) direction);
+}
+
+static inline void sbus_unmap_single(struct sbus_dev *sdev,
+				     dma_addr_t dma_addr, size_t size,
+				     int direction)
+{
+	dma_unmap_single(&sdev->ofdev.dev, dma_addr, size,
+			 (enum dma_data_direction) direction);
+}
+
+static inline int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg,
+			      int nents, int direction)
+{
+	return dma_map_sg(&sdev->ofdev.dev, sg, nents,
+			  (enum dma_data_direction) direction);
+}
+
+static inline void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg,
+				 int nents, int direction)
+{
+	dma_unmap_sg(&sdev->ofdev.dev, sg, nents,
+		     (enum dma_data_direction) direction);
+}
+
+/* Finally, allow explicit synchronization of streamable mappings. */
+static inline void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev,
+						dma_addr_t dma_handle,
+						size_t size, int direction)
+{
+	dma_sync_single_for_cpu(&sdev->ofdev.dev, dma_handle, size,
+				(enum dma_data_direction) direction);
+}
+#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu
+
+static inline void sbus_dma_sync_single_for_device(struct sbus_dev *sdev,
+						   dma_addr_t dma_handle,
+						   size_t size, int direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+static inline void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev,
+					    struct scatterlist *sg,
+					    int nents, int direction)
+{
+	dma_sync_sg_for_cpu(&sdev->ofdev.dev, sg, nents,
+			    (enum dma_data_direction) direction);
+}
+#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu
+
+static inline void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev,
+					       struct scatterlist *sg,
+					       int nents, int direction)
+{
+	/* No flushing needed to sync cpu writes to the device.  */
+}
+
+extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *);
+extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *);
+extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *);
+extern int sbus_arch_preinit(void);
+extern void sbus_arch_postinit(void);
+
+#endif /* !(_SPARC64_SBUS_H) */
diff --git a/arch/sparc/include/asm/scatterlist.h b/arch/sparc/include/asm/scatterlist.h
new file mode 100644
index 000000000000..ec21a4517641
--- /dev/null
+++ b/arch/sparc/include/asm/scatterlist.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SCATTERLIST_H
+#define ___ASM_SPARC_SCATTERLIST_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/scatterlist_64.h>
+#else
+#include <asm/scatterlist_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/scatterlist_32.h b/arch/sparc/include/asm/scatterlist_32.h
new file mode 100644
index 000000000000..c82609ca1d0f
--- /dev/null
+++ b/arch/sparc/include/asm/scatterlist_32.h
@@ -0,0 +1,26 @@
+#ifndef _SPARC_SCATTERLIST_H
+#define _SPARC_SCATTERLIST_H
+
+#include <linux/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long sg_magic;
+#endif
+	unsigned long page_link;
+	unsigned int offset;
+
+	unsigned int length;
+
+	__u32 dvma_address; /* A place to hang host-specific addresses at. */
+	__u32 dvma_length;
+};
+
+#define sg_dma_address(sg) ((sg)->dvma_address)
+#define sg_dma_len(sg)     ((sg)->dvma_length)
+
+#define ISA_DMA_THRESHOLD (~0UL)
+
+#define ARCH_HAS_SG_CHAIN
+
+#endif /* !(_SPARC_SCATTERLIST_H) */
diff --git a/arch/sparc/include/asm/scatterlist_64.h b/arch/sparc/include/asm/scatterlist_64.h
new file mode 100644
index 000000000000..81bd058f9382
--- /dev/null
+++ b/arch/sparc/include/asm/scatterlist_64.h
@@ -0,0 +1,27 @@
+#ifndef _SPARC64_SCATTERLIST_H
+#define _SPARC64_SCATTERLIST_H
+
+#include <asm/page.h>
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+	unsigned long	sg_magic;
+#endif
+	unsigned long	page_link;
+	unsigned int	offset;
+
+	unsigned int	length;
+
+	dma_addr_t	dma_address;
+	__u32		dma_length;
+};
+
+#define sg_dma_address(sg)	((sg)->dma_address)
+#define sg_dma_len(sg)     	((sg)->dma_length)
+
+#define ISA_DMA_THRESHOLD	(~0UL)
+
+#define ARCH_HAS_SG_CHAIN
+
+#endif /* !(_SPARC64_SCATTERLIST_H) */
diff --git a/arch/sparc/include/asm/scratchpad.h b/arch/sparc/include/asm/scratchpad.h
new file mode 100644
index 000000000000..5e8b01fb3343
--- /dev/null
+++ b/arch/sparc/include/asm/scratchpad.h
@@ -0,0 +1,14 @@
+#ifndef _SPARC64_SCRATCHPAD_H
+#define _SPARC64_SCRATCHPAD_H
+
+/* Sun4v scratchpad registers, accessed via ASI_SCRATCHPAD.  */
+
+#define SCRATCHPAD_MMU_MISS	0x00 /* Shared with OBP - set by OBP	    */
+#define SCRATCHPAD_CPUID	0x08 /* Shared with OBP - set by hypervisor */
+#define SCRATCHPAD_UTSBREG1	0x10
+#define SCRATCHPAD_UTSBREG2	0x18
+	/* 0x20 and 0x28, hypervisor only... */
+#define SCRATCHPAD_UNUSED1	0x30
+#define SCRATCHPAD_UNUSED2	0x38 /* Reserved for OBP		    */
+
+#endif /* !(_SPARC64_SCRATCHPAD_H) */
diff --git a/arch/sparc/include/asm/seccomp.h b/arch/sparc/include/asm/seccomp.h
new file mode 100644
index 000000000000..7fcd9968192b
--- /dev/null
+++ b/arch/sparc/include/asm/seccomp.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_SECCOMP_H
+
+#include <linux/thread_info.h> /* already defines TIF_32BIT */
+
+#ifndef TIF_32BIT
+#error "unexpected TIF_32BIT on sparc64"
+#endif
+
+#include <linux/unistd.h>
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+
+#define __NR_seccomp_read_32 __NR_read
+#define __NR_seccomp_write_32 __NR_write
+#define __NR_seccomp_exit_32 __NR_exit
+#define __NR_seccomp_sigreturn_32 __NR_sigreturn
+
+#endif /* _ASM_SECCOMP_H */
diff --git a/arch/sparc/include/asm/sections.h b/arch/sparc/include/asm/sections.h
new file mode 100644
index 000000000000..c7c69b00967f
--- /dev/null
+++ b/arch/sparc/include/asm/sections.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SECTIONS_H
+#define ___ASM_SPARC_SECTIONS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sections_64.h>
+#else
+#include <asm/sections_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/sections_32.h b/arch/sparc/include/asm/sections_32.h
new file mode 100644
index 000000000000..6832841df051
--- /dev/null
+++ b/arch/sparc/include/asm/sections_32.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_SECTIONS_H
+#define _SPARC_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif
diff --git a/arch/sparc/include/asm/sections_64.h b/arch/sparc/include/asm/sections_64.h
new file mode 100644
index 000000000000..3f4b9fdc28d0
--- /dev/null
+++ b/arch/sparc/include/asm/sections_64.h
@@ -0,0 +1,9 @@
+#ifndef _SPARC64_SECTIONS_H
+#define _SPARC64_SECTIONS_H
+
+/* nothing to see, move along */
+#include <asm-generic/sections.h>
+
+extern char _start[];
+
+#endif
diff --git a/arch/sparc/include/asm/sembuf.h b/arch/sparc/include/asm/sembuf.h
new file mode 100644
index 000000000000..faee1be08d67
--- /dev/null
+++ b/arch/sparc/include/asm/sembuf.h
@@ -0,0 +1,31 @@
+#ifndef _SPARC_SEMBUF_H
+#define _SPARC_SEMBUF_H
+
+/*
+ * The semid64_ds structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+#if defined(__sparc__) && defined(__arch64__)
+# define PADDING(x)
+#else
+# define PADDING(x) unsigned int x;
+#endif
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	PADDING(__pad1)
+	__kernel_time_t	sem_otime;		/* last semop time */
+	PADDING(__pad2)
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+};
+#undef PADDING
+
+#endif /* _SPARC64_SEMBUF_H */
diff --git a/arch/sparc/include/asm/setup.h b/arch/sparc/include/asm/setup.h
new file mode 100644
index 000000000000..2643c62f4ac0
--- /dev/null
+++ b/arch/sparc/include/asm/setup.h
@@ -0,0 +1,14 @@
+/*
+ *	Just a place holder. 
+ */
+
+#ifndef _SPARC_SETUP_H
+#define _SPARC_SETUP_H
+
+#if defined(__sparc__) && defined(__arch64__)
+# define COMMAND_LINE_SIZE 2048
+#else
+# define COMMAND_LINE_SIZE 256
+#endif
+
+#endif /* _SPARC_SETUP_H */
diff --git a/arch/sparc/include/asm/sfafsr.h b/arch/sparc/include/asm/sfafsr.h
new file mode 100644
index 000000000000..e96137b04a4f
--- /dev/null
+++ b/arch/sparc/include/asm/sfafsr.h
@@ -0,0 +1,82 @@
+#ifndef _SPARC64_SFAFSR_H
+#define _SPARC64_SFAFSR_H
+
+#include <linux/const.h>
+
+/* Spitfire Asynchronous Fault Status register, ASI=0x4C VA<63:0>=0x0 */
+
+#define SFAFSR_ME		(_AC(1,UL) << SFAFSR_ME_SHIFT)
+#define SFAFSR_ME_SHIFT		32
+#define SFAFSR_PRIV		(_AC(1,UL) << SFAFSR_PRIV_SHIFT)
+#define SFAFSR_PRIV_SHIFT	31
+#define SFAFSR_ISAP		(_AC(1,UL) << SFAFSR_ISAP_SHIFT)
+#define SFAFSR_ISAP_SHIFT	30
+#define SFAFSR_ETP		(_AC(1,UL) << SFAFSR_ETP_SHIFT)
+#define SFAFSR_ETP_SHIFT	29
+#define SFAFSR_IVUE		(_AC(1,UL) << SFAFSR_IVUE_SHIFT)
+#define SFAFSR_IVUE_SHIFT	28
+#define SFAFSR_TO		(_AC(1,UL) << SFAFSR_TO_SHIFT)
+#define SFAFSR_TO_SHIFT		27
+#define SFAFSR_BERR		(_AC(1,UL) << SFAFSR_BERR_SHIFT)
+#define SFAFSR_BERR_SHIFT	26
+#define SFAFSR_LDP		(_AC(1,UL) << SFAFSR_LDP_SHIFT)
+#define SFAFSR_LDP_SHIFT	25
+#define SFAFSR_CP		(_AC(1,UL) << SFAFSR_CP_SHIFT)
+#define SFAFSR_CP_SHIFT		24
+#define SFAFSR_WP		(_AC(1,UL) << SFAFSR_WP_SHIFT)
+#define SFAFSR_WP_SHIFT		23
+#define SFAFSR_EDP		(_AC(1,UL) << SFAFSR_EDP_SHIFT)
+#define SFAFSR_EDP_SHIFT	22
+#define SFAFSR_UE		(_AC(1,UL) << SFAFSR_UE_SHIFT)
+#define SFAFSR_UE_SHIFT		21
+#define SFAFSR_CE		(_AC(1,UL) << SFAFSR_CE_SHIFT)
+#define SFAFSR_CE_SHIFT		20
+#define SFAFSR_ETS		(_AC(0xf,UL) << SFAFSR_ETS_SHIFT)
+#define SFAFSR_ETS_SHIFT	16
+#define SFAFSR_PSYND		(_AC(0xffff,UL) << SFAFSR_PSYND_SHIFT)
+#define SFAFSR_PSYND_SHIFT	0
+
+/* UDB Error Register, ASI=0x7f VA<63:0>=0x0(High),0x18(Low) for read
+ *                     ASI=0x77 VA<63:0>=0x0(High),0x18(Low) for write
+ */
+
+#define UDBE_UE			(_AC(1,UL) << 9)
+#define UDBE_CE			(_AC(1,UL) << 8)
+#define UDBE_E_SYNDR		(_AC(0xff,UL) << 0)
+
+/* The trap handlers for asynchronous errors encode the AFSR and
+ * other pieces of information into a 64-bit argument for C code
+ * encoded as follows:
+ *
+ * -----------------------------------------------
+ * |  UDB_H  |  UDB_L  | TL>1  |  TT  |   AFSR   |
+ * -----------------------------------------------
+ *  63     54 53     44    42   41  33 32       0
+ *
+ * The AFAR is passed in unchanged.
+ */
+#define SFSTAT_UDBH_MASK	(_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT)
+#define SFSTAT_UDBH_SHIFT	54
+#define SFSTAT_UDBL_MASK	(_AC(0x3ff,UL) << SFSTAT_UDBH_SHIFT)
+#define SFSTAT_UDBL_SHIFT	44
+#define SFSTAT_TL_GT_ONE	(_AC(1,UL) << SFSTAT_TL_GT_ONE_SHIFT)
+#define SFSTAT_TL_GT_ONE_SHIFT	42
+#define SFSTAT_TRAP_TYPE	(_AC(0x1FF,UL) << SFSTAT_TRAP_TYPE_SHIFT)
+#define SFSTAT_TRAP_TYPE_SHIFT	33
+#define SFSTAT_AFSR_MASK	(_AC(0x1ffffffff,UL) << SFSTAT_AFSR_SHIFT)
+#define SFSTAT_AFSR_SHIFT	0
+
+/* ESTATE Error Enable Register, ASI=0x4b VA<63:0>=0x0 */
+#define ESTATE_ERR_CE		0x1 /* Correctable errors                    */
+#define ESTATE_ERR_NCE		0x2 /* TO, BERR, LDP, ETP, EDP, WP, UE, IVUE */
+#define ESTATE_ERR_ISAP		0x4 /* System address parity error           */
+#define ESTATE_ERR_ALL		(ESTATE_ERR_CE | \
+				 ESTATE_ERR_NCE | \
+				 ESTATE_ERR_ISAP)
+
+/* The various trap types that report using the above state. */
+#define TRAP_TYPE_IAE		0x09 /* Instruction Access Error             */
+#define TRAP_TYPE_DAE		0x32 /* Data Access Error                    */
+#define TRAP_TYPE_CEE		0x63 /* Correctable ECC Error                */
+
+#endif /* _SPARC64_SFAFSR_H */
diff --git a/arch/sparc/include/asm/sfp-machine.h b/arch/sparc/include/asm/sfp-machine.h
new file mode 100644
index 000000000000..4ebc3823ed4f
--- /dev/null
+++ b/arch/sparc/include/asm/sfp-machine.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SFP_MACHINE_H
+#define ___ASM_SPARC_SFP_MACHINE_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sfp-machine_64.h>
+#else
+#include <asm/sfp-machine_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/sfp-machine_32.h b/arch/sparc/include/asm/sfp-machine_32.h
new file mode 100644
index 000000000000..01d9c3b5a73b
--- /dev/null
+++ b/arch/sparc/include/asm/sfp-machine_32.h
@@ -0,0 +1,212 @@
+/* Machine-dependent software floating-point definitions.
+   Sparc userland (_Q_*) version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz),
+		  David S. Miller (davem@redhat.com) and
+		  Peter Maydell (pmaydell@chiark.greenend.org.uk).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+
+
+#define _FP_W_TYPE_SIZE		32
+#define _FP_W_TYPE		unsigned long
+#define _FP_WS_TYPE		signed long
+#define _FP_I_TYPE		long
+
+#define _FP_MUL_MEAT_S(R,X,Y)					\
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_D(R,X,Y)					\
+  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)					\
+  _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_udiv(S,R,X,Y)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_2_udiv(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_4_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1), -1
+#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1
+#define _FP_NANSIGN_S		0
+#define _FP_NANSIGN_D		0
+#define _FP_NANSIGN_Q		0
+
+#define _FP_KEEPNANFRACP 1
+
+/* If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+/* For _Qp_* and _Q_*, this should prefer X, for
+ * CPU instruction emulation this should prefer Y.
+ * (see SPAMv9 B.2.2 section).
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)			\
+  do {								\
+    if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)		\
+	&& !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs))	\
+      {								\
+	R##_s = X##_s;						\
+	_FP_FRAC_COPY_##wc(R,X);				\
+      }								\
+    else							\
+      {								\
+	R##_s = Y##_s;						\
+	_FP_FRAC_COPY_##wc(R,Y);				\
+      }								\
+    R##_c = FP_CLS_NAN;						\
+  } while (0)
+
+/* Some assembly to speed things up. */
+#define __FP_FRAC_ADD_3(r2,r1,r0,x2,x1,x0,y2,y1,y0)			\
+  __asm__ ("addcc %r7,%8,%2\n\t"					\
+	   "addxcc %r5,%6,%1\n\t"					\
+	   "addx %r3,%4,%0\n"						\
+	   : "=r" ((USItype)(r2)),					\
+	     "=&r" ((USItype)(r1)),					\
+	     "=&r" ((USItype)(r0))					\
+	   : "%rJ" ((USItype)(x2)),					\
+	     "rI" ((USItype)(y2)),					\
+	     "%rJ" ((USItype)(x1)),					\
+	     "rI" ((USItype)(y1)),					\
+	     "%rJ" ((USItype)(x0)),					\
+	     "rI" ((USItype)(y0))					\
+	   : "cc")
+
+#define __FP_FRAC_SUB_3(r2,r1,r0,x2,x1,x0,y2,y1,y0)			\
+  __asm__ ("subcc %r7,%8,%2\n\t"					\
+	    "subxcc %r5,%6,%1\n\t"					\
+	    "subx %r3,%4,%0\n"						\
+	   : "=r" ((USItype)(r2)),					\
+	     "=&r" ((USItype)(r1)),					\
+	     "=&r" ((USItype)(r0))					\
+	   : "%rJ" ((USItype)(x2)),					\
+	     "rI" ((USItype)(y2)),					\
+	     "%rJ" ((USItype)(x1)),					\
+	     "rI" ((USItype)(y1)),					\
+	     "%rJ" ((USItype)(x0)),					\
+	     "rI" ((USItype)(y0))					\
+	   : "cc")
+
+#define __FP_FRAC_ADD_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)		\
+  do {									\
+    /* We need to fool gcc,  as we need to pass more than 10		\
+       input/outputs.  */						\
+    register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2");		\
+    __asm__ __volatile__ (						\
+	    "addcc %r8,%9,%1\n\t"					\
+	    "addxcc %r6,%7,%0\n\t"					\
+	    "addxcc %r4,%5,%%g2\n\t"					\
+	    "addx %r2,%3,%%g1\n\t"					\
+	   : "=&r" ((USItype)(r1)),					\
+	     "=&r" ((USItype)(r0))					\
+	   : "%rJ" ((USItype)(x3)),					\
+	     "rI" ((USItype)(y3)),					\
+	     "%rJ" ((USItype)(x2)),					\
+	     "rI" ((USItype)(y2)),					\
+	     "%rJ" ((USItype)(x1)),					\
+	     "rI" ((USItype)(y1)),					\
+	     "%rJ" ((USItype)(x0)),					\
+	     "rI" ((USItype)(y0))					\
+	   : "cc", "g1", "g2");						\
+    __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2));			\
+    r3 = _t1; r2 = _t2;							\
+  } while (0)
+
+#define __FP_FRAC_SUB_4(r3,r2,r1,r0,x3,x2,x1,x0,y3,y2,y1,y0)		\
+  do {									\
+    /* We need to fool gcc,  as we need to pass more than 10		\
+       input/outputs.  */						\
+    register USItype _t1 __asm__ ("g1"), _t2 __asm__ ("g2");		\
+    __asm__ __volatile__ (						\
+	    "subcc %r8,%9,%1\n\t"					\
+	    "subxcc %r6,%7,%0\n\t"					\
+	    "subxcc %r4,%5,%%g2\n\t"					\
+	    "subx %r2,%3,%%g1\n\t"					\
+	   : "=&r" ((USItype)(r1)),					\
+	     "=&r" ((USItype)(r0))					\
+	   : "%rJ" ((USItype)(x3)),					\
+	     "rI" ((USItype)(y3)),					\
+	     "%rJ" ((USItype)(x2)),					\
+	     "rI" ((USItype)(y2)),					\
+	     "%rJ" ((USItype)(x1)),					\
+	     "rI" ((USItype)(y1)),					\
+	     "%rJ" ((USItype)(x0)),					\
+	     "rI" ((USItype)(y0))					\
+	   : "cc", "g1", "g2");						\
+    __asm__ __volatile__ ("" : "=r" (_t1), "=r" (_t2));			\
+    r3 = _t1; r2 = _t2;							\
+  } while (0)
+
+#define __FP_FRAC_DEC_3(x2,x1,x0,y2,y1,y0) __FP_FRAC_SUB_3(x2,x1,x0,x2,x1,x0,y2,y1,y0)
+
+#define __FP_FRAC_DEC_4(x3,x2,x1,x0,y3,y2,y1,y0) __FP_FRAC_SUB_4(x3,x2,x1,x0,x3,x2,x1,x0,y3,y2,y1,y0)
+
+#define __FP_FRAC_ADDI_4(x3,x2,x1,x0,i)					\
+  __asm__ ("addcc %3,%4,%3\n\t"						\
+	   "addxcc %2,%%g0,%2\n\t"					\
+	   "addxcc %1,%%g0,%1\n\t"					\
+	   "addx %0,%%g0,%0\n\t"					\
+	   : "=&r" ((USItype)(x3)),					\
+	     "=&r" ((USItype)(x2)),					\
+	     "=&r" ((USItype)(x1)),					\
+	     "=&r" ((USItype)(x0))					\
+	   : "rI" ((USItype)(i)),					\
+	     "0" ((USItype)(x3)),					\
+	     "1" ((USItype)(x2)),					\
+	     "2" ((USItype)(x1)),					\
+	     "3" ((USItype)(x0))					\
+	   : "cc")
+
+#ifndef CONFIG_SMP
+extern struct task_struct *last_task_used_math;
+#endif
+
+/* Obtain the current rounding mode. */
+#ifndef FP_ROUNDMODE
+#ifdef CONFIG_SMP
+#define FP_ROUNDMODE	((current->thread.fsr >> 30) & 0x3)
+#else
+#define FP_ROUNDMODE	((last_task_used_math->thread.fsr >> 30) & 0x3)
+#endif
+#endif
+
+/* Exception flags. */
+#define FP_EX_INVALID		(1 << 4)
+#define FP_EX_OVERFLOW		(1 << 3)
+#define FP_EX_UNDERFLOW		(1 << 2)
+#define FP_EX_DIVZERO		(1 << 1)
+#define FP_EX_INEXACT		(1 << 0)
+
+#define FP_HANDLE_EXCEPTIONS return _fex
+
+#ifdef CONFIG_SMP
+#define FP_INHIBIT_RESULTS ((current->thread.fsr >> 23) & _fex)
+#else
+#define FP_INHIBIT_RESULTS ((last_task_used_math->thread.fsr >> 23) & _fex)
+#endif
+
+#ifdef CONFIG_SMP
+#define FP_TRAPPING_EXCEPTIONS ((current->thread.fsr >> 23) & 0x1f)
+#else
+#define FP_TRAPPING_EXCEPTIONS ((last_task_used_math->thread.fsr >> 23) & 0x1f)
+#endif
+
+#endif
diff --git a/arch/sparc/include/asm/sfp-machine_64.h b/arch/sparc/include/asm/sfp-machine_64.h
new file mode 100644
index 000000000000..ca913ef40bd5
--- /dev/null
+++ b/arch/sparc/include/asm/sfp-machine_64.h
@@ -0,0 +1,93 @@
+/* Machine-dependent software floating-point definitions.
+   Sparc64 kernel version.
+   Copyright (C) 1997,1998,1999 Free Software Foundation, Inc.
+   This file is part of the GNU C Library.
+   Contributed by Richard Henderson (rth@cygnus.com),
+		  Jakub Jelinek (jj@ultra.linux.cz) and
+		  David S. Miller (davem@redhat.com).
+
+   The GNU C Library is free software; you can redistribute it and/or
+   modify it under the terms of the GNU Library General Public License as
+   published by the Free Software Foundation; either version 2 of the
+   License, or (at your option) any later version.
+
+   The GNU C Library is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+   Library General Public License for more details.
+
+   You should have received a copy of the GNU Library General Public
+   License along with the GNU C Library; see the file COPYING.LIB.  If
+   not, write to the Free Software Foundation, Inc.,
+   59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#ifndef _SFP_MACHINE_H
+#define _SFP_MACHINE_H
+
+#define _FP_W_TYPE_SIZE		64
+#define _FP_W_TYPE		unsigned long
+#define _FP_WS_TYPE		signed long
+#define _FP_I_TYPE		long
+
+#define _FP_MUL_MEAT_S(R,X,Y)					\
+  _FP_MUL_MEAT_1_imm(_FP_WFRACBITS_S,R,X,Y)
+#define _FP_MUL_MEAT_D(R,X,Y)					\
+  _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
+#define _FP_MUL_MEAT_Q(R,X,Y)					\
+  _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm)
+
+#define _FP_DIV_MEAT_S(R,X,Y)	_FP_DIV_MEAT_1_imm(S,R,X,Y,_FP_DIV_HELP_imm)
+#define _FP_DIV_MEAT_D(R,X,Y)	_FP_DIV_MEAT_1_udiv_norm(D,R,X,Y)
+#define _FP_DIV_MEAT_Q(R,X,Y)	_FP_DIV_MEAT_2_udiv(Q,R,X,Y)
+
+#define _FP_NANFRAC_S		((_FP_QNANBIT_S << 1) - 1)
+#define _FP_NANFRAC_D		((_FP_QNANBIT_D << 1) - 1)
+#define _FP_NANFRAC_Q		((_FP_QNANBIT_Q << 1) - 1), -1
+#define _FP_NANSIGN_S		0
+#define _FP_NANSIGN_D		0
+#define _FP_NANSIGN_Q		0
+
+#define _FP_KEEPNANFRACP 1
+
+/* If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+/* For _Qp_* and _Q_*, this should prefer X, for
+ * CPU instruction emulation this should prefer Y.
+ * (see SPAMv9 B.2.2 section).
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP)			\
+  do {								\
+    if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)		\
+	&& !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs))	\
+      {								\
+	R##_s = X##_s;						\
+	_FP_FRAC_COPY_##wc(R,X);				\
+      }								\
+    else							\
+      {								\
+	R##_s = Y##_s;						\
+	_FP_FRAC_COPY_##wc(R,Y);				\
+      }								\
+    R##_c = FP_CLS_NAN;						\
+  } while (0)
+
+/* Obtain the current rounding mode. */
+#ifndef FP_ROUNDMODE
+#define FP_ROUNDMODE	((current_thread_info()->xfsr[0] >> 30) & 0x3)
+#endif
+
+/* Exception flags. */
+#define FP_EX_INVALID		(1 << 4)
+#define FP_EX_OVERFLOW		(1 << 3)
+#define FP_EX_UNDERFLOW		(1 << 2)
+#define FP_EX_DIVZERO		(1 << 1)
+#define FP_EX_INEXACT		(1 << 0)
+
+#define FP_HANDLE_EXCEPTIONS return _fex
+
+#define FP_INHIBIT_RESULTS ((current_thread_info()->xfsr[0] >> 23) & _fex)
+
+#define FP_TRAPPING_EXCEPTIONS ((current_thread_info()->xfsr[0] >> 23) & 0x1f)
+
+#endif
diff --git a/arch/sparc/include/asm/shmbuf.h b/arch/sparc/include/asm/shmbuf.h
new file mode 100644
index 000000000000..83a16055363f
--- /dev/null
+++ b/arch/sparc/include/asm/shmbuf.h
@@ -0,0 +1,50 @@
+#ifndef _SPARC_SHMBUF_H
+#define _SPARC_SHMBUF_H
+
+/* 
+ * The shmid64_ds structure for sparc architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+#if defined(__sparc__) && defined(__arch64__)
+# define PADDING(x)
+#else
+# define PADDING(x) unsigned int x;
+#endif
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	PADDING(__pad1)
+	__kernel_time_t		shm_atime;	/* last attach time */
+	PADDING(__pad2)
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	PADDING(__pad3)
+	__kernel_time_t		shm_ctime;	/* last change time */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#undef PADDING
+
+#endif /* _SPARC_SHMBUF_H */
diff --git a/arch/sparc/include/asm/shmparam.h b/arch/sparc/include/asm/shmparam.h
new file mode 100644
index 000000000000..8bf0cfe0694f
--- /dev/null
+++ b/arch/sparc/include/asm/shmparam.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SHMPARAM_H
+#define ___ASM_SPARC_SHMPARAM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/shmparam_64.h>
+#else
+#include <asm/shmparam_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/shmparam_32.h b/arch/sparc/include/asm/shmparam_32.h
new file mode 100644
index 000000000000..59a1243c12f3
--- /dev/null
+++ b/arch/sparc/include/asm/shmparam_32.h
@@ -0,0 +1,11 @@
+#ifndef _ASMSPARC_SHMPARAM_H
+#define _ASMSPARC_SHMPARAM_H
+
+#define __ARCH_FORCE_SHMLBA 	1
+
+extern int vac_cache_size;
+#define SHMLBA (vac_cache_size ? vac_cache_size : \
+		(sparc_cpu_model == sun4c ? (64 * 1024) : \
+		 (sparc_cpu_model == sun4 ? (128 * 1024) : PAGE_SIZE)))
+
+#endif /* _ASMSPARC_SHMPARAM_H */
diff --git a/arch/sparc/include/asm/shmparam_64.h b/arch/sparc/include/asm/shmparam_64.h
new file mode 100644
index 000000000000..1ed0d6701a9b
--- /dev/null
+++ b/arch/sparc/include/asm/shmparam_64.h
@@ -0,0 +1,10 @@
+#ifndef _ASMSPARC64_SHMPARAM_H
+#define _ASMSPARC64_SHMPARAM_H
+
+#include <asm/spitfire.h>
+
+#define __ARCH_FORCE_SHMLBA	1
+/* attach addr a multiple of this */
+#define	SHMLBA	((PAGE_SIZE > L1DCACHE_SIZE) ? PAGE_SIZE : L1DCACHE_SIZE)
+
+#endif /* _ASMSPARC64_SHMPARAM_H */
diff --git a/arch/sparc/include/asm/sigcontext.h b/arch/sparc/include/asm/sigcontext.h
new file mode 100644
index 000000000000..e92de7e286b5
--- /dev/null
+++ b/arch/sparc/include/asm/sigcontext.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGCONTEXT_H
+#define ___ASM_SPARC_SIGCONTEXT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/sigcontext_64.h>
+#else
+#include <asm/sigcontext_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/sigcontext_32.h b/arch/sparc/include/asm/sigcontext_32.h
new file mode 100644
index 000000000000..c5fb60dcbd75
--- /dev/null
+++ b/arch/sparc/include/asm/sigcontext_32.h
@@ -0,0 +1,62 @@
+#ifndef __SPARC_SIGCONTEXT_H
+#define __SPARC_SIGCONTEXT_H
+
+#ifdef __KERNEL__
+#include <asm/ptrace.h>
+
+#ifndef __ASSEMBLY__
+
+#define __SUNOS_MAXWIN   31
+
+/* This is what SunOS does, so shall I. */
+struct sigcontext {
+	int sigc_onstack;      /* state to restore */
+	int sigc_mask;         /* sigmask to restore */
+	int sigc_sp;           /* stack pointer */
+	int sigc_pc;           /* program counter */
+	int sigc_npc;          /* next program counter */
+	int sigc_psr;          /* for condition codes etc */
+	int sigc_g1;           /* User uses these two registers */
+	int sigc_o0;           /* within the trampoline code. */
+
+	/* Now comes information regarding the users window set
+	 * at the time of the signal.
+	 */
+	int sigc_oswins;       /* outstanding windows */
+
+	/* stack ptrs for each regwin buf */
+	char *sigc_spbuf[__SUNOS_MAXWIN];
+
+	/* Windows to restore after signal */
+	struct {
+		unsigned long	locals[8];
+		unsigned long	ins[8];
+	} sigc_wbuf[__SUNOS_MAXWIN];
+};
+
+typedef struct {
+	struct {
+		unsigned long psr;
+		unsigned long pc;
+		unsigned long npc;
+		unsigned long y;
+		unsigned long u_regs[16]; /* globals and ins */
+	}		si_regs;
+	int		si_mask;
+} __siginfo_t;
+
+typedef struct {
+	unsigned   long si_float_regs [32];
+	unsigned   long si_fsr;
+	unsigned   long si_fpqdepth;
+	struct {
+		unsigned long *insn_addr;
+		unsigned long insn;
+	} si_fpqueue [16];
+} __siginfo_fpu_t;
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* (__KERNEL__) */
+
+#endif /* !(__SPARC_SIGCONTEXT_H) */
diff --git a/arch/sparc/include/asm/sigcontext_64.h b/arch/sparc/include/asm/sigcontext_64.h
new file mode 100644
index 000000000000..1c868d680cfc
--- /dev/null
+++ b/arch/sparc/include/asm/sigcontext_64.h
@@ -0,0 +1,87 @@
+#ifndef __SPARC64_SIGCONTEXT_H
+#define __SPARC64_SIGCONTEXT_H
+
+#ifdef __KERNEL__
+#include <asm/ptrace.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+#ifdef __KERNEL__
+
+#define __SUNOS_MAXWIN   31
+
+/* This is what SunOS does, so shall I unless we use new 32bit signals or rt signals. */
+struct sigcontext32 {
+	int sigc_onstack;      /* state to restore */
+	int sigc_mask;         /* sigmask to restore */
+	int sigc_sp;           /* stack pointer */
+	int sigc_pc;           /* program counter */
+	int sigc_npc;          /* next program counter */
+	int sigc_psr;          /* for condition codes etc */
+	int sigc_g1;           /* User uses these two registers */
+	int sigc_o0;           /* within the trampoline code. */
+
+	/* Now comes information regarding the users window set
+	 * at the time of the signal.
+	 */
+	int sigc_oswins;       /* outstanding windows */
+
+	/* stack ptrs for each regwin buf */
+	unsigned sigc_spbuf[__SUNOS_MAXWIN];
+
+	/* Windows to restore after signal */
+	struct reg_window32 sigc_wbuf[__SUNOS_MAXWIN];
+};
+
+#endif
+
+#ifdef __KERNEL__
+
+/* This is what we use for 32bit new non-rt signals. */
+
+typedef struct {
+	struct {
+		unsigned int psr;
+		unsigned int pc;
+		unsigned int npc;
+		unsigned int y;
+		unsigned int u_regs[16]; /* globals and ins */
+	}			si_regs;
+	int			si_mask;
+} __siginfo32_t;
+
+#endif
+
+typedef struct {
+	unsigned   int si_float_regs [64];
+	unsigned   long si_fsr;
+	unsigned   long si_gsr;
+	unsigned   long si_fprs;
+} __siginfo_fpu_t;
+
+/* This is what SunOS doesn't, so we have to write this alone
+   and do it properly. */
+struct sigcontext {
+	/* The size of this array has to match SI_MAX_SIZE from siginfo.h */
+	char			sigc_info[128];
+	struct {
+		unsigned long	u_regs[16]; /* globals and ins */
+		unsigned long	tstate;
+		unsigned long	tpc;
+		unsigned long	tnpc;
+		unsigned int	y;
+		unsigned int	fprs;
+	}			sigc_regs;
+	__siginfo_fpu_t *	sigc_fpu_save;
+	struct {
+		void	*	ss_sp;
+		int		ss_flags;
+		unsigned long	ss_size;
+	}			sigc_stack;
+	unsigned long		sigc_mask;
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_SIGCONTEXT_H) */
diff --git a/arch/sparc/include/asm/siginfo.h b/arch/sparc/include/asm/siginfo.h
new file mode 100644
index 000000000000..bd81f8d7f5ce
--- /dev/null
+++ b/arch/sparc/include/asm/siginfo.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGINFO_H
+#define ___ASM_SPARC_SIGINFO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/siginfo_64.h>
+#else
+#include <asm/siginfo_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/siginfo_32.h b/arch/sparc/include/asm/siginfo_32.h
new file mode 100644
index 000000000000..3c71af135c52
--- /dev/null
+++ b/arch/sparc/include/asm/siginfo_32.h
@@ -0,0 +1,17 @@
+#ifndef _SPARC_SIGINFO_H
+#define _SPARC_SIGINFO_H
+
+#define __ARCH_SI_UID_T		unsigned int
+#define __ARCH_SI_TRAPNO
+
+#include <asm-generic/siginfo.h>
+
+#define SI_NOINFO	32767		/* no information in siginfo_t */
+
+/*
+ * SIGEMT si_codes
+ */
+#define EMT_TAGOVF	(__SI_FAULT|1)	/* tag overflow */
+#define NSIGEMT		1
+
+#endif /* !(_SPARC_SIGINFO_H) */
diff --git a/arch/sparc/include/asm/siginfo_64.h b/arch/sparc/include/asm/siginfo_64.h
new file mode 100644
index 000000000000..c96e6c30f8b0
--- /dev/null
+++ b/arch/sparc/include/asm/siginfo_64.h
@@ -0,0 +1,32 @@
+#ifndef _SPARC64_SIGINFO_H
+#define _SPARC64_SIGINFO_H
+
+#define SI_PAD_SIZE32	((SI_MAX_SIZE/sizeof(int)) - 3)
+
+#define __ARCH_SI_PREAMBLE_SIZE	(4 * sizeof(int))
+#define __ARCH_SI_TRAPNO
+#define __ARCH_SI_BAND_T int
+
+#include <asm-generic/siginfo.h>
+
+#ifdef __KERNEL__
+
+#include <linux/compat.h>
+
+#ifdef CONFIG_COMPAT
+
+struct compat_siginfo;
+
+#endif /* CONFIG_COMPAT */
+
+#endif /* __KERNEL__ */
+
+#define SI_NOINFO	32767		/* no information in siginfo_t */
+
+/*
+ * SIGEMT si_codes
+ */
+#define EMT_TAGOVF	(__SI_FAULT|1)	/* tag overflow */
+#define NSIGEMT		1
+
+#endif
diff --git a/arch/sparc/include/asm/signal.h b/arch/sparc/include/asm/signal.h
new file mode 100644
index 000000000000..27ab05dc203e
--- /dev/null
+++ b/arch/sparc/include/asm/signal.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SIGNAL_H
+#define ___ASM_SPARC_SIGNAL_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/signal_64.h>
+#else
+#include <asm/signal_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/signal_32.h b/arch/sparc/include/asm/signal_32.h
new file mode 100644
index 000000000000..96a60ab03ca1
--- /dev/null
+++ b/arch/sparc/include/asm/signal_32.h
@@ -0,0 +1,207 @@
+#ifndef _ASMSPARC_SIGNAL_H
+#define _ASMSPARC_SIGNAL_H
+
+#include <asm/sigcontext.h>
+#include <linux/compiler.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/personality.h>
+#include <linux/types.h>
+#endif
+#endif
+
+/* On the Sparc the signal handlers get passed a 'sub-signal' code
+ * for certain signal types, which we document here.
+ */
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define    SUBSIG_STACK       0
+#define    SUBSIG_ILLINST     2
+#define    SUBSIG_PRIVINST    3
+#define    SUBSIG_BADTRAP(t)  (0x80 + (t))
+
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+
+#define SIGEMT           7
+#define    SUBSIG_TAG    10
+
+#define SIGFPE		 8
+#define    SUBSIG_FPDISABLED     0x400
+#define    SUBSIG_FPERROR        0x404
+#define    SUBSIG_FPINTOVFL      0x001
+#define    SUBSIG_FPSTSIG        0x002
+#define    SUBSIG_IDIVZERO       0x014
+#define    SUBSIG_FPINEXACT      0x0c4
+#define    SUBSIG_FPDIVZERO      0x0c8
+#define    SUBSIG_FPUNFLOW       0x0cc
+#define    SUBSIG_FPOPERROR      0x0d0
+#define    SUBSIG_FPOVFLOW       0x0d4
+
+#define SIGKILL		 9
+#define SIGBUS          10
+#define    SUBSIG_BUSTIMEOUT    1
+#define    SUBSIG_ALIGNMENT     2
+#define    SUBSIG_MISCERROR     5
+
+#define SIGSEGV		11
+#define    SUBSIG_NOMAPPING     3
+#define    SUBSIG_PROTECTION    4
+#define    SUBSIG_SEGERROR      5
+
+#define SIGSYS		12
+
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGURG          16
+
+/* SunOS values which deviate from the Linux/i386 ones */
+#define SIGSTOP		17
+#define SIGTSTP		18
+#define SIGCONT		19
+#define SIGCHLD		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGIO		23
+#define SIGPOLL		SIGIO   /* SysV name for SIGIO */
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGLOST		29
+#define SIGPWR		SIGLOST
+#define SIGUSR1		30
+#define SIGUSR2		31
+
+/* Most things should be clean enough to redefine this at will, if care
+ * is taken to make libc match.
+ */
+
+#define __OLD_NSIG	32
+#define __NEW_NSIG	64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(__NEW_NSIG / _NSIG_BPW)
+
+#define SIGRTMIN	32
+#define SIGRTMAX	__NEW_NSIG
+
+#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
+#define	_NSIG		__NEW_NSIG
+#define __new_sigset_t	sigset_t
+#define __new_sigaction	sigaction
+#define __old_sigset_t	old_sigset_t
+#define __old_sigaction	old_sigaction
+#else
+#define _NSIG		__OLD_NSIG
+#define __old_sigset_t	sigset_t
+#define __old_sigaction	sigaction
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long __old_sigset_t;
+
+typedef struct {
+	unsigned long	sig[_NSIG_WORDS];
+} __new_sigset_t;
+
+
+#ifdef __KERNEL__
+/* A SunOS sigstack */
+struct sigstack {
+	char *the_stack;
+	int   cur_status;
+};
+#endif
+
+/* Sigvec flags */
+#define _SV_SSTACK    1u    /* This signal handler should use sig-stack */
+#define _SV_INTR      2u    /* Sig return should not restart system call */
+#define _SV_RESET     4u    /* Set handler to SIG_DFL upon taken signal */
+#define _SV_IGNCHILD  8u    /* Do not send SIGCHLD */
+
+/*
+ * sa_flags values: SA_STACK is not currently supported, but will allow the
+ * usage of signal stacks by using the (now obsolete) sa_restorer field in
+ * the sigaction structure as a stack pointer. This is now possible due to
+ * the changes in signal handling. LBT 010493.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ */
+#define SA_NOCLDSTOP	_SV_IGNCHILD
+#define SA_STACK	_SV_SSTACK
+#define SA_ONSTACK	_SV_SSTACK
+#define SA_RESTART	_SV_INTR
+#define SA_ONESHOT	_SV_RESET
+#define SA_NOMASK	0x20u
+#define SA_NOCLDWAIT	0x100u
+#define SA_SIGINFO	0x200u
+
+#define SIG_BLOCK          0x01	/* for blocking signals */
+#define SIG_UNBLOCK        0x02	/* for unblocking signals */
+#define SIG_SETMASK        0x04	/* for setting the signal mask */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	4096
+#define SIGSTKSZ	16384
+
+#ifdef __KERNEL__
+/*
+ * DJHR
+ * SA_STATIC_ALLOC is used for the SPARC system to indicate that this
+ * interrupt handler's irq structure should be statically allocated
+ * by the request_irq routine.
+ * The alternative is that arch/sparc/kernel/irq.c has carnal knowledge
+ * of interrupt usage and that sucks. Also without a flag like this
+ * it may be possible for the free_irq routine to attempt to free
+ * statically allocated data.. which is NOT GOOD.
+ *
+ */
+#define SA_STATIC_ALLOC		0x8000
+#endif
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct __new_sigaction {
+	__sighandler_t	sa_handler;
+	unsigned long	sa_flags;
+	void		(*sa_restorer)(void);	/* Not used by Linux/SPARC */
+	__new_sigset_t	sa_mask;
+};
+
+struct k_sigaction {
+	struct __new_sigaction	sa;
+	void			__user *ka_restorer;
+};
+
+struct __old_sigaction {
+	__sighandler_t	sa_handler;
+	__old_sigset_t	sa_mask;
+	unsigned long	sa_flags;
+	void		(*sa_restorer) (void);	/* not used by Linux/SPARC */
+};
+
+typedef struct sigaltstack {
+	void		__user *ss_sp;
+	int		ss_flags;
+	size_t		ss_size;
+} stack_t;
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_ASMSPARC_SIGNAL_H) */
diff --git a/arch/sparc/include/asm/signal_64.h b/arch/sparc/include/asm/signal_64.h
new file mode 100644
index 000000000000..ab1509a101c5
--- /dev/null
+++ b/arch/sparc/include/asm/signal_64.h
@@ -0,0 +1,194 @@
+#ifndef _ASMSPARC64_SIGNAL_H
+#define _ASMSPARC64_SIGNAL_H
+
+#include <asm/sigcontext.h>
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+#include <linux/personality.h>
+#include <linux/types.h>
+#endif
+#endif
+
+/* On the Sparc the signal handlers get passed a 'sub-signal' code
+ * for certain signal types, which we document here.
+ */
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define    SUBSIG_STACK       0
+#define    SUBSIG_ILLINST     2
+#define    SUBSIG_PRIVINST    3
+#define    SUBSIG_BADTRAP(t)  (0x80 + (t))
+
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+
+#define SIGEMT           7
+#define    SUBSIG_TAG    10
+
+#define SIGFPE		 8
+#define    SUBSIG_FPDISABLED     0x400
+#define    SUBSIG_FPERROR        0x404
+#define    SUBSIG_FPINTOVFL      0x001
+#define    SUBSIG_FPSTSIG        0x002
+#define    SUBSIG_IDIVZERO       0x014
+#define    SUBSIG_FPINEXACT      0x0c4
+#define    SUBSIG_FPDIVZERO      0x0c8
+#define    SUBSIG_FPUNFLOW       0x0cc
+#define    SUBSIG_FPOPERROR      0x0d0
+#define    SUBSIG_FPOVFLOW       0x0d4
+
+#define SIGKILL		 9
+#define SIGBUS          10
+#define    SUBSIG_BUSTIMEOUT    1
+#define    SUBSIG_ALIGNMENT     2
+#define    SUBSIG_MISCERROR     5
+
+#define SIGSEGV		11
+#define    SUBSIG_NOMAPPING     3
+#define    SUBSIG_PROTECTION    4
+#define    SUBSIG_SEGERROR      5
+
+#define SIGSYS		12
+
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGURG          16
+
+/* SunOS values which deviate from the Linux/i386 ones */
+#define SIGSTOP		17
+#define SIGTSTP		18
+#define SIGCONT		19
+#define SIGCHLD		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGIO		23
+#define SIGPOLL		SIGIO   /* SysV name for SIGIO */
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGLOST		29
+#define SIGPWR		SIGLOST
+#define SIGUSR1		30
+#define SIGUSR2		31
+
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define __OLD_NSIG	32
+#define __NEW_NSIG      64
+#define _NSIG_BPW     	64
+#define _NSIG_WORDS   	(__NEW_NSIG / _NSIG_BPW)
+
+#define SIGRTMIN       32
+#define SIGRTMAX       __NEW_NSIG
+
+#if defined(__KERNEL__) || defined(__WANT_POSIX1B_SIGNALS__)
+#define _NSIG			__NEW_NSIG
+#define __new_sigset_t		sigset_t
+#define __new_sigaction		sigaction
+#define __new_sigaction32	sigaction32
+#define __old_sigset_t		old_sigset_t
+#define __old_sigaction		old_sigaction
+#define __old_sigaction32	old_sigaction32
+#else
+#define _NSIG			__OLD_NSIG
+#define NSIG			_NSIG
+#define __old_sigset_t		sigset_t
+#define __old_sigaction		sigaction
+#define __old_sigaction32	sigaction32
+#endif
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long __old_sigset_t;            /* at least 32 bits */
+
+typedef struct {
+       unsigned long sig[_NSIG_WORDS];
+} __new_sigset_t;
+
+/* A SunOS sigstack */
+struct sigstack {
+	/* XXX 32-bit pointers pinhead XXX */
+	char *the_stack;
+	int   cur_status;
+};
+
+/* Sigvec flags */
+#define _SV_SSTACK    1u    /* This signal handler should use sig-stack */
+#define _SV_INTR      2u    /* Sig return should not restart system call */
+#define _SV_RESET     4u    /* Set handler to SIG_DFL upon taken signal */
+#define _SV_IGNCHILD  8u    /* Do not send SIGCHLD */
+
+/*
+ * sa_flags values: SA_STACK is not currently supported, but will allow the
+ * usage of signal stacks by using the (now obsolete) sa_restorer field in
+ * the sigaction structure as a stack pointer. This is now possible due to
+ * the changes in signal handling. LBT 010493.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ */
+#define SA_NOCLDSTOP	_SV_IGNCHILD
+#define SA_STACK	_SV_SSTACK
+#define SA_ONSTACK	_SV_SSTACK
+#define SA_RESTART	_SV_INTR
+#define SA_ONESHOT	_SV_RESET
+#define SA_NOMASK	0x20u
+#define SA_NOCLDWAIT    0x100u
+#define SA_SIGINFO      0x200u
+
+
+#define SIG_BLOCK          0x01	/* for blocking signals */
+#define SIG_UNBLOCK        0x02	/* for unblocking signals */
+#define SIG_SETMASK        0x04	/* for setting the signal mask */
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	4096
+#define SIGSTKSZ	16384
+
+#include <asm-generic/signal.h>
+
+struct __new_sigaction {
+	__sighandler_t		sa_handler;
+	unsigned long		sa_flags;
+	__sigrestore_t 		sa_restorer;  /* not used by Linux/SPARC yet */
+	__new_sigset_t		sa_mask;
+};
+
+struct __old_sigaction {
+	__sighandler_t  	sa_handler;
+	__old_sigset_t  	sa_mask;
+	unsigned long   	sa_flags;
+	void 			(*sa_restorer)(void);     /* not used by Linux/SPARC yet */
+};
+
+typedef struct sigaltstack {
+	void			__user *ss_sp;
+	int			ss_flags;
+	size_t			ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+struct k_sigaction {
+	struct __new_sigaction 	sa;
+	void __user		*ka_restorer;
+};
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_ASMSPARC64_SIGNAL_H) */
diff --git a/arch/sparc/include/asm/smp.h b/arch/sparc/include/asm/smp.h
new file mode 100644
index 000000000000..b59672d0e19b
--- /dev/null
+++ b/arch/sparc/include/asm/smp.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SMP_H
+#define ___ASM_SPARC_SMP_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/smp_64.h>
+#else
+#include <asm/smp_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/smp_32.h b/arch/sparc/include/asm/smp_32.h
new file mode 100644
index 000000000000..7201752cf934
--- /dev/null
+++ b/arch/sparc/include/asm/smp_32.h
@@ -0,0 +1,173 @@
+/* smp.h: Sparc specific SMP stuff.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SMP_H
+#define _SPARC_SMP_H
+
+#include <linux/threads.h>
+#include <asm/head.h>
+#include <asm/btfixup.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cpumask.h>
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef CONFIG_SMP
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+#include <asm/asi.h>
+#include <asm/atomic.h>
+
+/*
+ *	Private routines/data
+ */
+
+extern unsigned char boot_cpu_id;
+extern cpumask_t phys_cpu_present_map;
+#define cpu_possible_map phys_cpu_present_map
+
+typedef void (*smpfunc_t)(unsigned long, unsigned long, unsigned long,
+		       unsigned long, unsigned long);
+
+/*
+ *	General functions that each host system must provide.
+ */
+
+void sun4m_init_smp(void);
+void sun4d_init_smp(void);
+
+void smp_callin(void);
+void smp_boot_cpus(void);
+void smp_store_cpu_info(int);
+
+struct seq_file;
+void smp_bogo(struct seq_file *);
+void smp_info(struct seq_file *);
+
+BTFIXUPDEF_CALL(void, smp_cross_call, smpfunc_t, unsigned long, unsigned long, unsigned long, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(int, __hard_smp_processor_id, void)
+BTFIXUPDEF_BLACKBOX(hard_smp_processor_id)
+BTFIXUPDEF_BLACKBOX(load_current)
+
+#define smp_cross_call(func,arg1,arg2,arg3,arg4,arg5) BTFIXUP_CALL(smp_cross_call)(func,arg1,arg2,arg3,arg4,arg5)
+
+static inline void xc0(smpfunc_t func) { smp_cross_call(func, 0, 0, 0, 0, 0); }
+static inline void xc1(smpfunc_t func, unsigned long arg1)
+{ smp_cross_call(func, arg1, 0, 0, 0, 0); }
+static inline void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2)
+{ smp_cross_call(func, arg1, arg2, 0, 0, 0); }
+static inline void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+			   unsigned long arg3)
+{ smp_cross_call(func, arg1, arg2, arg3, 0, 0); }
+static inline void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+			   unsigned long arg3, unsigned long arg4)
+{ smp_cross_call(func, arg1, arg2, arg3, arg4, 0); }
+static inline void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2,
+			   unsigned long arg3, unsigned long arg4, unsigned long arg5)
+{ smp_cross_call(func, arg1, arg2, arg3, arg4, arg5); }
+
+static inline int smp_call_function(void (*func)(void *info), void *info, int wait)
+{
+	xc1((smpfunc_t)func, (unsigned long)info);
+	return 0;
+}
+
+static inline int cpu_logical_map(int cpu)
+{
+	return cpu;
+}
+
+static inline int hard_smp4m_processor_id(void)
+{
+	int cpuid;
+
+	__asm__ __volatile__("rd %%tbr, %0\n\t"
+			     "srl %0, 12, %0\n\t"
+			     "and %0, 3, %0\n\t" :
+			     "=&r" (cpuid));
+	return cpuid;
+}
+
+static inline int hard_smp4d_processor_id(void)
+{
+	int cpuid;
+
+	__asm__ __volatile__("lda [%%g0] %1, %0\n\t" :
+			     "=&r" (cpuid) : "i" (ASI_M_VIKING_TMP1));
+	return cpuid;
+}
+
+#ifndef MODULE
+static inline int hard_smp_processor_id(void)
+{
+	int cpuid;
+
+	/* Black box - sun4m
+		__asm__ __volatile__("rd %%tbr, %0\n\t"
+				     "srl %0, 12, %0\n\t"
+				     "and %0, 3, %0\n\t" :
+				     "=&r" (cpuid));
+	             - sun4d
+		__asm__ __volatile__("lda [%g0] ASI_M_VIKING_TMP1, %0\n\t"
+				     "nop; nop" :
+				     "=&r" (cpuid));
+	   See btfixup.h and btfixupprep.c to understand how a blackbox works.
+	 */
+	__asm__ __volatile__("sethi %%hi(___b_hard_smp_processor_id), %0\n\t"
+			     "sethi %%hi(boot_cpu_id), %0\n\t"
+			     "ldub [%0 + %%lo(boot_cpu_id)], %0\n\t" :
+			     "=&r" (cpuid));
+	return cpuid;
+}
+#else
+static inline int hard_smp_processor_id(void)
+{
+	int cpuid;
+
+	__asm__ __volatile__("mov %%o7, %%g1\n\t"
+			     "call ___f___hard_smp_processor_id\n\t"
+			     " nop\n\t"
+			     "mov %%g2, %0\n\t" : "=r"(cpuid) : : "g1", "g2");
+	return cpuid;
+}
+#endif
+
+#define raw_smp_processor_id()		(current_thread_info()->cpu)
+
+#define prof_multiplier(__cpu)		cpu_data(__cpu).multiplier
+#define prof_counter(__cpu)		cpu_data(__cpu).counter
+
+void smp_setup_cpu_possible_map(void);
+
+#endif /* !(__ASSEMBLY__) */
+
+/* Sparc specific messages. */
+#define MSG_CROSS_CALL         0x0005       /* run func on cpus */
+
+/* Empirical PROM processor mailbox constants.  If the per-cpu mailbox
+ * contains something other than one of these then the ipi is from
+ * Linux's active_kernel_processor.  This facility exists so that
+ * the boot monitor can capture all the other cpus when one catches
+ * a watchdog reset or the user enters the monitor using L1-A keys.
+ */
+#define MBOX_STOPCPU          0xFB
+#define MBOX_IDLECPU          0xFC
+#define MBOX_IDLECPU2         0xFD
+#define MBOX_STOPCPU2         0xFE
+
+#else /* SMP */
+
+#define hard_smp_processor_id()		0
+#define smp_setup_cpu_possible_map() do { } while (0)
+
+#endif /* !(SMP) */
+
+#define NO_PROC_ID            0xFF
+
+#endif /* !(_SPARC_SMP_H) */
diff --git a/arch/sparc/include/asm/smp_64.h b/arch/sparc/include/asm/smp_64.h
new file mode 100644
index 000000000000..57224dd37b3a
--- /dev/null
+++ b/arch/sparc/include/asm/smp_64.h
@@ -0,0 +1,67 @@
+/* smp.h: Sparc64 specific SMP stuff.
+ *
+ * Copyright (C) 1996, 2008 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_SMP_H
+#define _SPARC64_SMP_H
+
+#include <linux/threads.h>
+#include <asm/asi.h>
+#include <asm/starfire.h>
+#include <asm/spitfire.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/cpumask.h>
+#include <linux/cache.h>
+
+#endif /* !(__ASSEMBLY__) */
+
+#ifdef CONFIG_SMP
+
+#ifndef __ASSEMBLY__
+
+/*
+ *	Private routines/data
+ */
+
+#include <linux/bitops.h>
+#include <asm/atomic.h>
+#include <asm/percpu.h>
+
+DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+extern cpumask_t cpu_core_map[NR_CPUS];
+extern int sparc64_multi_core;
+
+extern void arch_send_call_function_single_ipi(int cpu);
+extern void arch_send_call_function_ipi(cpumask_t mask);
+
+/*
+ *	General functions that each host system must provide.
+ */
+
+extern int hard_smp_processor_id(void);
+#define raw_smp_processor_id() (current_thread_info()->cpu)
+
+extern void smp_fill_in_sib_core_maps(void);
+extern void cpu_play_dead(void);
+
+extern void smp_fetch_global_regs(void);
+
+#ifdef CONFIG_HOTPLUG_CPU
+extern int __cpu_disable(void);
+extern void __cpu_die(unsigned int cpu);
+#endif
+
+#endif /* !(__ASSEMBLY__) */
+
+#else
+
+#define hard_smp_processor_id()		0
+#define smp_fill_in_sib_core_maps() do { } while (0)
+#define smp_fetch_global_regs() do { } while (0)
+
+#endif /* !(CONFIG_SMP) */
+
+#endif /* !(_SPARC64_SMP_H) */
diff --git a/arch/sparc/include/asm/smpprim.h b/arch/sparc/include/asm/smpprim.h
new file mode 100644
index 000000000000..eb849d862c64
--- /dev/null
+++ b/arch/sparc/include/asm/smpprim.h
@@ -0,0 +1,54 @@
+/*
+ *  smpprim.h:  SMP locking primitives on the Sparc
+ *
+ *  God knows we won't be actually using this code for some time
+ *  but I thought I'd write it since I knew how.
+ *
+ *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_SMPPRIM_H
+#define __SPARC_SMPPRIM_H
+
+/* Test and set the unsigned byte at ADDR to 1.  Returns the previous
+ * value.  On the Sparc we use the ldstub instruction since it is
+ * atomic.
+ */
+
+static inline __volatile__ char test_and_set(void *addr)
+{
+	char state = 0;
+
+	__asm__ __volatile__("ldstub [%0], %1         ! test_and_set\n\t"
+			     "=r" (addr), "=r" (state) :
+			     "0" (addr), "1" (state) : "memory");
+
+	return state;
+}
+
+/* Initialize a spin-lock. */
+static inline __volatile__ smp_initlock(void *spinlock)
+{
+	/* Unset the lock. */
+	*((unsigned char *) spinlock) = 0;
+
+	return;
+}
+
+/* This routine spins until it acquires the lock at ADDR. */
+static inline __volatile__ smp_lock(void *addr)
+{
+	while(test_and_set(addr) == 0xff)
+		;
+
+	/* We now have the lock */
+	return;
+}
+
+/* This routine releases the lock at ADDR. */
+static inline __volatile__ smp_unlock(void *addr)
+{
+	*((unsigned char *) addr) = 0;
+}
+
+#endif /* !(__SPARC_SMPPRIM_H) */
diff --git a/arch/sparc/include/asm/socket.h b/arch/sparc/include/asm/socket.h
new file mode 100644
index 000000000000..bf50d0c2d583
--- /dev/null
+++ b/arch/sparc/include/asm/socket.h
@@ -0,0 +1,58 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET	0xffff
+
+#define SO_DEBUG	0x0001
+#define SO_PASSCRED	0x0002
+#define SO_REUSEADDR	0x0004
+#define SO_KEEPALIVE	0x0008
+#define SO_DONTROUTE	0x0010
+#define SO_BROADCAST	0x0020
+#define SO_PEERCRED	0x0040
+#define SO_LINGER	0x0080
+#define SO_OOBINLINE	0x0100
+/* To add :#define SO_REUSEPORT 0x0200 */
+#define SO_BSDCOMPAT    0x0400
+#define SO_RCVLOWAT     0x0800
+#define SO_SNDLOWAT     0x1000
+#define SO_RCVTIMEO     0x2000
+#define SO_SNDTIMEO     0x4000
+#define SO_ACCEPTCONN	0x8000
+
+#define SO_SNDBUF	0x1001
+#define SO_RCVBUF	0x1002
+#define SO_SNDBUFFORCE	0x100a
+#define SO_RCVBUFFORCE	0x100b
+#define SO_ERROR	0x1007
+#define SO_TYPE		0x1008
+
+/* Linux specific, keep the same. */
+#define SO_NO_CHECK	0x000b
+#define SO_PRIORITY	0x000c
+
+#define SO_BINDTODEVICE 0x000d
+
+#define SO_ATTACH_FILTER	0x001a
+#define SO_DETACH_FILTER        0x001b
+
+#define SO_PEERNAME		0x001c
+#define SO_TIMESTAMP		0x001d
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_PEERSEC		0x001e
+#define SO_PASSSEC		0x001f
+#define SO_TIMESTAMPNS		0x0021
+#define SCM_TIMESTAMPNS		SO_TIMESTAMPNS
+
+#define SO_MARK			0x0022
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		0x5001
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	0x5002
+#define SO_SECURITY_ENCRYPTION_NETWORK		0x5004
+
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/sparc/include/asm/sockios.h b/arch/sparc/include/asm/sockios.h
new file mode 100644
index 000000000000..990ea746486b
--- /dev/null
+++ b/arch/sparc/include/asm/sockios.h
@@ -0,0 +1,14 @@
+#ifndef _ASM_SPARC_SOCKIOS_H
+#define _ASM_SPARC_SOCKIOS_H
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp (timeval) */
+#define SIOCGSTAMPNS	0x8907		/* Get stamp (timespec) */
+
+#endif /* !(_ASM_SPARC_SOCKIOS_H) */
+
diff --git a/arch/sparc/include/asm/sparsemem.h b/arch/sparc/include/asm/sparsemem.h
new file mode 100644
index 000000000000..b99d4e4b6d28
--- /dev/null
+++ b/arch/sparc/include/asm/sparsemem.h
@@ -0,0 +1,12 @@
+#ifndef _SPARC64_SPARSEMEM_H
+#define _SPARC64_SPARSEMEM_H
+
+#ifdef __KERNEL__
+
+#define SECTION_SIZE_BITS       30
+#define MAX_PHYSADDR_BITS       42
+#define MAX_PHYSMEM_BITS        42
+
+#endif /* !(__KERNEL__) */
+
+#endif /* !(_SPARC64_SPARSEMEM_H) */
diff --git a/arch/sparc/include/asm/spinlock.h b/arch/sparc/include/asm/spinlock.h
new file mode 100644
index 000000000000..f276b0036b2c
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SPINLOCK_H
+#define ___ASM_SPARC_SPINLOCK_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/spinlock_64.h>
+#else
+#include <asm/spinlock_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/spinlock_32.h b/arch/sparc/include/asm/spinlock_32.h
new file mode 100644
index 000000000000..de2249b267c6
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock_32.h
@@ -0,0 +1,192 @@
+/* spinlock.h: 32-bit Sparc spinlock support.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_SPINLOCK_H
+#define __SPARC_SPINLOCK_H
+
+#include <linux/threads.h>	/* For NR_CPUS */
+
+#ifndef __ASSEMBLY__
+
+#include <asm/psr.h>
+
+#define __raw_spin_is_locked(lock) (*((volatile unsigned char *)(lock)) != 0)
+
+#define __raw_spin_unlock_wait(lock) \
+	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	__asm__ __volatile__(
+	"\n1:\n\t"
+	"ldstub	[%0], %%g2\n\t"
+	"orcc	%%g2, 0x0, %%g0\n\t"
+	"bne,a	2f\n\t"
+	" ldub	[%0], %%g2\n\t"
+	".subsection	2\n"
+	"2:\n\t"
+	"orcc	%%g2, 0x0, %%g0\n\t"
+	"bne,a	2b\n\t"
+	" ldub	[%0], %%g2\n\t"
+	"b,a	1b\n\t"
+	".previous\n"
+	: /* no outputs */
+	: "r" (lock)
+	: "g2", "memory", "cc");
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	unsigned int result;
+	__asm__ __volatile__("ldstub [%1], %0"
+			     : "=r" (result)
+			     : "r" (lock)
+			     : "memory");
+	return (result == 0);
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	__asm__ __volatile__("stb %%g0, [%0]" : : "r" (lock) : "memory");
+}
+
+/* Read-write spinlocks, allowing multiple readers
+ * but only one writer.
+ *
+ * NOTE! it is quite common to have readers in interrupts
+ * but no interrupt writers. For those circumstances we
+ * can "mix" irq-safe locks - any writer needs to get a
+ * irq-safe write-lock, but readers can get non-irqsafe
+ * read-locks.
+ *
+ * XXX This might create some problems with my dual spinlock
+ * XXX scheme, deadlocks etc. -DaveM
+ *
+ * Sort of like atomic_t's on Sparc, but even more clever.
+ *
+ *	------------------------------------
+ *	| 24-bit counter           | wlock |  raw_rwlock_t
+ *	------------------------------------
+ *	 31                       8 7     0
+ *
+ * wlock signifies the one writer is in or somebody is updating
+ * counter. For a writer, if he successfully acquires the wlock,
+ * but counter is non-zero, he has to release the lock and wait,
+ * till both counter and wlock are zero.
+ *
+ * Unfortunately this scheme limits us to ~16,000,000 cpus.
+ */
+static inline void __read_lock(raw_rwlock_t *rw)
+{
+	register raw_rwlock_t *lp asm("g1");
+	lp = rw;
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___rw_read_enter\n\t"
+	" ldstub	[%%g1 + 3], %%g2\n"
+	: /* no outputs */
+	: "r" (lp)
+	: "g2", "g4", "memory", "cc");
+}
+
+#define __raw_read_lock(lock) \
+do {	unsigned long flags; \
+	local_irq_save(flags); \
+	__read_lock(lock); \
+	local_irq_restore(flags); \
+} while(0)
+
+static inline void __read_unlock(raw_rwlock_t *rw)
+{
+	register raw_rwlock_t *lp asm("g1");
+	lp = rw;
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___rw_read_exit\n\t"
+	" ldstub	[%%g1 + 3], %%g2\n"
+	: /* no outputs */
+	: "r" (lp)
+	: "g2", "g4", "memory", "cc");
+}
+
+#define __raw_read_unlock(lock) \
+do {	unsigned long flags; \
+	local_irq_save(flags); \
+	__read_unlock(lock); \
+	local_irq_restore(flags); \
+} while(0)
+
+static inline void __raw_write_lock(raw_rwlock_t *rw)
+{
+	register raw_rwlock_t *lp asm("g1");
+	lp = rw;
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___rw_write_enter\n\t"
+	" ldstub	[%%g1 + 3], %%g2\n"
+	: /* no outputs */
+	: "r" (lp)
+	: "g2", "g4", "memory", "cc");
+	*(volatile __u32 *)&lp->lock = ~0U;
+}
+
+static inline int __raw_write_trylock(raw_rwlock_t *rw)
+{
+	unsigned int val;
+
+	__asm__ __volatile__("ldstub [%1 + 3], %0"
+			     : "=r" (val)
+			     : "r" (&rw->lock)
+			     : "memory");
+
+	if (val == 0) {
+		val = rw->lock & ~0xff;
+		if (val)
+			((volatile u8*)&rw->lock)[3] = 0;
+		else
+			*(volatile u32*)&rw->lock = ~0U;
+	}
+
+	return (val == 0);
+}
+
+static inline int __read_trylock(raw_rwlock_t *rw)
+{
+	register raw_rwlock_t *lp asm("g1");
+	register int res asm("o0");
+	lp = rw;
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___rw_read_try\n\t"
+	" ldstub	[%%g1 + 3], %%g2\n"
+	: "=r" (res)
+	: "r" (lp)
+	: "g2", "g4", "memory", "cc");
+	return res;
+}
+
+#define __raw_read_trylock(lock) \
+({	unsigned long flags; \
+	int res; \
+	local_irq_save(flags); \
+	res = __read_trylock(lock); \
+	local_irq_restore(flags); \
+	res; \
+})
+
+#define __raw_write_unlock(rw)	do { (rw)->lock = 0; } while(0)
+
+#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#define __raw_read_can_lock(rw) (!((rw)->lock & 0xff))
+#define __raw_write_can_lock(rw) (!(rw)->lock)
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* __SPARC_SPINLOCK_H */
diff --git a/arch/sparc/include/asm/spinlock_64.h b/arch/sparc/include/asm/spinlock_64.h
new file mode 100644
index 000000000000..0006fe9f8c7a
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock_64.h
@@ -0,0 +1,250 @@
+/* spinlock.h: 64-bit Sparc spinlock support.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC64_SPINLOCK_H
+#define __SPARC64_SPINLOCK_H
+
+#include <linux/threads.h>	/* For NR_CPUS */
+
+#ifndef __ASSEMBLY__
+
+/* To get debugging spinlocks which detect and catch
+ * deadlock situations, set CONFIG_DEBUG_SPINLOCK
+ * and rebuild your kernel.
+ */
+
+/* All of these locking primitives are expected to work properly
+ * even in an RMO memory model, which currently is what the kernel
+ * runs in.
+ *
+ * There is another issue.  Because we play games to save cycles
+ * in the non-contention case, we need to be extra careful about
+ * branch targets into the "spinning" code.  They live in their
+ * own section, but the newer V9 branches have a shorter range
+ * than the traditional 32-bit sparc branch variants.  The rule
+ * is that the branches that go into and out of the spinner sections
+ * must be pre-V9 branches.
+ */
+
+#define __raw_spin_is_locked(lp)	((lp)->lock != 0)
+
+#define __raw_spin_unlock_wait(lp)	\
+	do {	rmb();			\
+	} while((lp)->lock)
+
+static inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	unsigned long tmp;
+
+	__asm__ __volatile__(
+"1:	ldstub		[%1], %0\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	brnz,pn		%0, 2f\n"
+"	 nop\n"
+"	.subsection	2\n"
+"2:	ldub		[%1], %0\n"
+"	membar		#LoadLoad\n"
+"	brnz,pt		%0, 2b\n"
+"	 nop\n"
+"	ba,a,pt		%%xcc, 1b\n"
+"	.previous"
+	: "=&r" (tmp)
+	: "r" (lock)
+	: "memory");
+}
+
+static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	unsigned long result;
+
+	__asm__ __volatile__(
+"	ldstub		[%1], %0\n"
+"	membar		#StoreLoad | #StoreStore"
+	: "=r" (result)
+	: "r" (lock)
+	: "memory");
+
+	return (result == 0UL);
+}
+
+static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	__asm__ __volatile__(
+"	membar		#StoreStore | #LoadStore\n"
+"	stb		%%g0, [%0]"
+	: /* No outputs */
+	: "r" (lock)
+	: "memory");
+}
+
+static inline void __raw_spin_lock_flags(raw_spinlock_t *lock, unsigned long flags)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__(
+"1:	ldstub		[%2], %0\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	brnz,pn		%0, 2f\n"
+"	 nop\n"
+"	.subsection	2\n"
+"2:	rdpr		%%pil, %1\n"
+"	wrpr		%3, %%pil\n"
+"3:	ldub		[%2], %0\n"
+"	membar		#LoadLoad\n"
+"	brnz,pt		%0, 3b\n"
+"	 nop\n"
+"	ba,pt		%%xcc, 1b\n"
+"	 wrpr		%1, %%pil\n"
+"	.previous"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r"(lock), "r"(flags)
+	: "memory");
+}
+
+/* Multi-reader locks, these are much saner than the 32-bit Sparc ones... */
+
+static void inline __read_lock(raw_rwlock_t *lock)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__ (
+"1:	ldsw		[%2], %0\n"
+"	brlz,pn		%0, 2f\n"
+"4:	 add		%0, 1, %1\n"
+"	cas		[%2], %0, %1\n"
+"	cmp		%0, %1\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	bne,pn		%%icc, 1b\n"
+"	 nop\n"
+"	.subsection	2\n"
+"2:	ldsw		[%2], %0\n"
+"	membar		#LoadLoad\n"
+"	brlz,pt		%0, 2b\n"
+"	 nop\n"
+"	ba,a,pt		%%xcc, 4b\n"
+"	.previous"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r" (lock)
+	: "memory");
+}
+
+static int inline __read_trylock(raw_rwlock_t *lock)
+{
+	int tmp1, tmp2;
+
+	__asm__ __volatile__ (
+"1:	ldsw		[%2], %0\n"
+"	brlz,a,pn	%0, 2f\n"
+"	 mov		0, %0\n"
+"	add		%0, 1, %1\n"
+"	cas		[%2], %0, %1\n"
+"	cmp		%0, %1\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	bne,pn		%%icc, 1b\n"
+"	 mov		1, %0\n"
+"2:"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r" (lock)
+	: "memory");
+
+	return tmp1;
+}
+
+static void inline __read_unlock(raw_rwlock_t *lock)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__(
+"	membar	#StoreLoad | #LoadLoad\n"
+"1:	lduw	[%2], %0\n"
+"	sub	%0, 1, %1\n"
+"	cas	[%2], %0, %1\n"
+"	cmp	%0, %1\n"
+"	bne,pn	%%xcc, 1b\n"
+"	 nop"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r" (lock)
+	: "memory");
+}
+
+static void inline __write_lock(raw_rwlock_t *lock)
+{
+	unsigned long mask, tmp1, tmp2;
+
+	mask = 0x80000000UL;
+
+	__asm__ __volatile__(
+"1:	lduw		[%2], %0\n"
+"	brnz,pn		%0, 2f\n"
+"4:	 or		%0, %3, %1\n"
+"	cas		[%2], %0, %1\n"
+"	cmp		%0, %1\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	bne,pn		%%icc, 1b\n"
+"	 nop\n"
+"	.subsection	2\n"
+"2:	lduw		[%2], %0\n"
+"	membar		#LoadLoad\n"
+"	brnz,pt		%0, 2b\n"
+"	 nop\n"
+"	ba,a,pt		%%xcc, 4b\n"
+"	.previous"
+	: "=&r" (tmp1), "=&r" (tmp2)
+	: "r" (lock), "r" (mask)
+	: "memory");
+}
+
+static void inline __write_unlock(raw_rwlock_t *lock)
+{
+	__asm__ __volatile__(
+"	membar		#LoadStore | #StoreStore\n"
+"	stw		%%g0, [%0]"
+	: /* no outputs */
+	: "r" (lock)
+	: "memory");
+}
+
+static int inline __write_trylock(raw_rwlock_t *lock)
+{
+	unsigned long mask, tmp1, tmp2, result;
+
+	mask = 0x80000000UL;
+
+	__asm__ __volatile__(
+"	mov		0, %2\n"
+"1:	lduw		[%3], %0\n"
+"	brnz,pn		%0, 2f\n"
+"	 or		%0, %4, %1\n"
+"	cas		[%3], %0, %1\n"
+"	cmp		%0, %1\n"
+"	membar		#StoreLoad | #StoreStore\n"
+"	bne,pn		%%icc, 1b\n"
+"	 nop\n"
+"	mov		1, %2\n"
+"2:"
+	: "=&r" (tmp1), "=&r" (tmp2), "=&r" (result)
+	: "r" (lock), "r" (mask)
+	: "memory");
+
+	return result;
+}
+
+#define __raw_read_lock(p)	__read_lock(p)
+#define __raw_read_trylock(p)	__read_trylock(p)
+#define __raw_read_unlock(p)	__read_unlock(p)
+#define __raw_write_lock(p)	__write_lock(p)
+#define __raw_write_unlock(p)	__write_unlock(p)
+#define __raw_write_trylock(p)	__write_trylock(p)
+
+#define __raw_read_can_lock(rw)		(!((rw)->lock & 0x80000000UL))
+#define __raw_write_can_lock(rw)	(!(rw)->lock)
+
+#define _raw_spin_relax(lock)	cpu_relax()
+#define _raw_read_relax(lock)	cpu_relax()
+#define _raw_write_relax(lock)	cpu_relax()
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC64_SPINLOCK_H) */
diff --git a/arch/sparc/include/asm/spinlock_types.h b/arch/sparc/include/asm/spinlock_types.h
new file mode 100644
index 000000000000..37cbe01c585b
--- /dev/null
+++ b/arch/sparc/include/asm/spinlock_types.h
@@ -0,0 +1,20 @@
+#ifndef __SPARC_SPINLOCK_TYPES_H
+#define __SPARC_SPINLOCK_TYPES_H
+
+#ifndef __LINUX_SPINLOCK_TYPES_H
+# error "please don't include this file directly"
+#endif
+
+typedef struct {
+	volatile unsigned char lock;
+} raw_spinlock_t;
+
+#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+
+typedef struct {
+	volatile unsigned int lock;
+} raw_rwlock_t;
+
+#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
+
+#endif
diff --git a/arch/sparc/include/asm/spitfire.h b/arch/sparc/include/asm/spitfire.h
new file mode 100644
index 000000000000..985ea7e31992
--- /dev/null
+++ b/arch/sparc/include/asm/spitfire.h
@@ -0,0 +1,342 @@
+/* spitfire.h: SpitFire/BlackBird/Cheetah inline MMU operations.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_SPITFIRE_H
+#define _SPARC64_SPITFIRE_H
+
+#include <asm/asi.h>
+
+/* The following register addresses are accessible via ASI_DMMU
+ * and ASI_IMMU, that is there is a distinct and unique copy of
+ * each these registers for each TLB.
+ */
+#define TSB_TAG_TARGET		0x0000000000000000 /* All chips				*/
+#define TLB_SFSR		0x0000000000000018 /* All chips				*/
+#define TSB_REG			0x0000000000000028 /* All chips				*/
+#define TLB_TAG_ACCESS		0x0000000000000030 /* All chips				*/
+#define VIRT_WATCHPOINT		0x0000000000000038 /* All chips				*/
+#define PHYS_WATCHPOINT		0x0000000000000040 /* All chips				*/
+#define TSB_EXTENSION_P		0x0000000000000048 /* Ultra-III and later		*/
+#define TSB_EXTENSION_S		0x0000000000000050 /* Ultra-III and later, D-TLB only	*/
+#define TSB_EXTENSION_N		0x0000000000000058 /* Ultra-III and later		*/
+#define TLB_TAG_ACCESS_EXT	0x0000000000000060 /* Ultra-III+ and later		*/
+
+/* These registers only exist as one entity, and are accessed
+ * via ASI_DMMU only.
+ */
+#define PRIMARY_CONTEXT		0x0000000000000008
+#define SECONDARY_CONTEXT	0x0000000000000010
+#define DMMU_SFAR		0x0000000000000020
+#define VIRT_WATCHPOINT		0x0000000000000038
+#define PHYS_WATCHPOINT		0x0000000000000040
+
+#define SPITFIRE_HIGHEST_LOCKED_TLBENT	(64 - 1)
+#define CHEETAH_HIGHEST_LOCKED_TLBENT	(16 - 1)
+
+#define L1DCACHE_SIZE		0x4000
+
+#define SUN4V_CHIP_INVALID	0x00
+#define SUN4V_CHIP_NIAGARA1	0x01
+#define SUN4V_CHIP_NIAGARA2	0x02
+#define SUN4V_CHIP_UNKNOWN	0xff
+
+#ifndef __ASSEMBLY__
+
+enum ultra_tlb_layout {
+	spitfire = 0,
+	cheetah = 1,
+	cheetah_plus = 2,
+	hypervisor = 3,
+};
+
+extern enum ultra_tlb_layout tlb_type;
+
+extern int sun4v_chip_type;
+
+extern int cheetah_pcache_forced_on;
+extern void cheetah_enable_pcache(void);
+
+#define sparc64_highest_locked_tlbent()	\
+	(tlb_type == spitfire ? \
+	 SPITFIRE_HIGHEST_LOCKED_TLBENT : \
+	 CHEETAH_HIGHEST_LOCKED_TLBENT)
+
+extern int num_kernel_image_mappings;
+
+/* The data cache is write through, so this just invalidates the
+ * specified line.
+ */
+static inline void spitfire_put_dcache_tag(unsigned long addr, unsigned long tag)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (tag), "r" (addr), "i" (ASI_DCACHE_TAG));
+}
+
+/* The instruction cache lines are flushed with this, but note that
+ * this does not flush the pipeline.  It is possible for a line to
+ * get flushed but stale instructions to still be in the pipeline,
+ * a flush instruction (to any address) is sufficient to handle
+ * this issue after the line is invalidated.
+ */
+static inline void spitfire_put_icache_tag(unsigned long addr, unsigned long tag)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (tag), "r" (addr), "i" (ASI_IC_TAG));
+}
+
+static inline unsigned long spitfire_get_dtlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" (entry << 3), "i" (ASI_DTLB_DATA_ACCESS));
+
+	/* Clear TTE diag bits. */
+	data &= ~0x0003fe0000000000UL;
+
+	return data;
+}
+
+static inline unsigned long spitfire_get_dtlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" (entry << 3), "i" (ASI_DTLB_TAG_READ));
+	return tag;
+}
+
+static inline void spitfire_put_dtlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data), "r" (entry << 3),
+			       "i" (ASI_DTLB_DATA_ACCESS));
+}
+
+static inline unsigned long spitfire_get_itlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" (entry << 3), "i" (ASI_ITLB_DATA_ACCESS));
+
+	/* Clear TTE diag bits. */
+	data &= ~0x0003fe0000000000UL;
+
+	return data;
+}
+
+static inline unsigned long spitfire_get_itlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" (entry << 3), "i" (ASI_ITLB_TAG_READ));
+	return tag;
+}
+
+static inline void spitfire_put_itlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data), "r" (entry << 3),
+			       "i" (ASI_ITLB_DATA_ACCESS));
+}
+
+static inline void spitfire_flush_dtlb_nucleus_page(unsigned long page)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (page | 0x20), "i" (ASI_DMMU_DEMAP));
+}
+
+static inline void spitfire_flush_itlb_nucleus_page(unsigned long page)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (page | 0x20), "i" (ASI_IMMU_DEMAP));
+}
+
+/* Cheetah has "all non-locked" tlb flushes. */
+static inline void cheetah_flush_dtlb_all(void)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (0x80), "i" (ASI_DMMU_DEMAP));
+}
+
+static inline void cheetah_flush_itlb_all(void)
+{
+	__asm__ __volatile__("stxa	%%g0, [%0] %1\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (0x80), "i" (ASI_IMMU_DEMAP));
+}
+
+/* Cheetah has a 4-tlb layout so direct access is a bit different.
+ * The first two TLBs are fully assosciative, hold 16 entries, and are
+ * used only for locked and >8K sized translations.  One exists for
+ * data accesses and one for instruction accesses.
+ *
+ * The third TLB is for data accesses to 8K non-locked translations, is
+ * 2 way assosciative, and holds 512 entries.  The fourth TLB is for
+ * instruction accesses to 8K non-locked translations, is 2 way
+ * assosciative, and holds 128 entries.
+ *
+ * Cheetah has some bug where bogus data can be returned from
+ * ASI_{D,I}TLB_DATA_ACCESS loads, doing the load twice fixes
+ * the problem for me. -DaveM
+ */
+static inline unsigned long cheetah_get_ldtlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
+			     "ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" ((0 << 16) | (entry << 3)),
+			     "i" (ASI_DTLB_DATA_ACCESS));
+
+	return data;
+}
+
+static inline unsigned long cheetah_get_litlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
+			     "ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" ((0 << 16) | (entry << 3)),
+			     "i" (ASI_ITLB_DATA_ACCESS));
+
+	return data;
+}
+
+static inline unsigned long cheetah_get_ldtlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" ((0 << 16) | (entry << 3)),
+			     "i" (ASI_DTLB_TAG_READ));
+
+	return tag;
+}
+
+static inline unsigned long cheetah_get_litlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" ((0 << 16) | (entry << 3)),
+			     "i" (ASI_ITLB_TAG_READ));
+
+	return tag;
+}
+
+static inline void cheetah_put_ldtlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data),
+			       "r" ((0 << 16) | (entry << 3)),
+			       "i" (ASI_DTLB_DATA_ACCESS));
+}
+
+static inline void cheetah_put_litlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data),
+			       "r" ((0 << 16) | (entry << 3)),
+			       "i" (ASI_ITLB_DATA_ACCESS));
+}
+
+static inline unsigned long cheetah_get_dtlb_data(int entry, int tlb)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
+			     "ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_DATA_ACCESS));
+
+	return data;
+}
+
+static inline unsigned long cheetah_get_dtlb_tag(int entry, int tlb)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" ((tlb << 16) | (entry << 3)), "i" (ASI_DTLB_TAG_READ));
+	return tag;
+}
+
+static inline void cheetah_put_dtlb_data(int entry, unsigned long data, int tlb)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data),
+			       "r" ((tlb << 16) | (entry << 3)),
+			       "i" (ASI_DTLB_DATA_ACCESS));
+}
+
+static inline unsigned long cheetah_get_itlb_data(int entry)
+{
+	unsigned long data;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %%g0\n\t"
+			     "ldxa	[%1] %2, %0"
+			     : "=r" (data)
+			     : "r" ((2 << 16) | (entry << 3)),
+                               "i" (ASI_ITLB_DATA_ACCESS));
+
+	return data;
+}
+
+static inline unsigned long cheetah_get_itlb_tag(int entry)
+{
+	unsigned long tag;
+
+	__asm__ __volatile__("ldxa	[%1] %2, %0"
+			     : "=r" (tag)
+			     : "r" ((2 << 16) | (entry << 3)), "i" (ASI_ITLB_TAG_READ));
+	return tag;
+}
+
+static inline void cheetah_put_itlb_data(int entry, unsigned long data)
+{
+	__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
+			     "membar	#Sync"
+			     : /* No outputs */
+			     : "r" (data), "r" ((2 << 16) | (entry << 3)),
+			       "i" (ASI_ITLB_DATA_ACCESS));
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(_SPARC64_SPITFIRE_H) */
diff --git a/arch/sparc/include/asm/sstate.h b/arch/sparc/include/asm/sstate.h
new file mode 100644
index 000000000000..a7c35dbcb281
--- /dev/null
+++ b/arch/sparc/include/asm/sstate.h
@@ -0,0 +1,13 @@
+#ifndef _SPARC64_SSTATE_H
+#define _SPARC64_SSTATE_H
+
+extern void sstate_booting(void);
+extern void sstate_running(void);
+extern void sstate_halt(void);
+extern void sstate_poweroff(void);
+extern void sstate_panic(void);
+extern void sstate_reboot(void);
+
+extern void sun4v_sstate_init(void);
+
+#endif /* _SPARC64_SSTATE_H */
diff --git a/arch/sparc/include/asm/stacktrace.h b/arch/sparc/include/asm/stacktrace.h
new file mode 100644
index 000000000000..6cee39adf6d6
--- /dev/null
+++ b/arch/sparc/include/asm/stacktrace.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC64_STACKTRACE_H
+#define _SPARC64_STACKTRACE_H
+
+extern void stack_trace_flush(void);
+
+#endif /* _SPARC64_STACKTRACE_H */
diff --git a/arch/sparc/include/asm/starfire.h b/arch/sparc/include/asm/starfire.h
new file mode 100644
index 000000000000..07bafd31e33c
--- /dev/null
+++ b/arch/sparc/include/asm/starfire.h
@@ -0,0 +1,21 @@
+/*
+ * starfire.h: Group all starfire specific code together.
+ *
+ * Copyright (C) 2000 Anton Blanchard (anton@samba.org)
+ */
+
+#ifndef _SPARC64_STARFIRE_H
+#define _SPARC64_STARFIRE_H
+
+#ifndef __ASSEMBLY__
+
+extern int this_is_starfire;
+
+extern void check_if_starfire(void);
+extern void starfire_cpu_setup(void);
+extern int starfire_hard_smp_processor_id(void);
+extern void starfire_hookup(int);
+extern unsigned int starfire_translate(unsigned long imap, unsigned int upaid);
+
+#endif
+#endif
diff --git a/arch/sparc/include/asm/stat.h b/arch/sparc/include/asm/stat.h
new file mode 100644
index 000000000000..d8153013df72
--- /dev/null
+++ b/arch/sparc/include/asm/stat.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STAT_H
+#define ___ASM_SPARC_STAT_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/stat_64.h>
+#else
+#include <asm/stat_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/stat_32.h b/arch/sparc/include/asm/stat_32.h
new file mode 100644
index 000000000000..2299e1d5d94c
--- /dev/null
+++ b/arch/sparc/include/asm/stat_32.h
@@ -0,0 +1,76 @@
+#ifndef _SPARC_STAT_H
+#define _SPARC_STAT_H
+
+#include <linux/types.h>
+
+struct __old_kernel_stat {
+	unsigned short st_dev;
+	unsigned short st_ino;
+	unsigned short st_mode;
+	unsigned short st_nlink;
+	unsigned short st_uid;
+	unsigned short st_gid;
+	unsigned short st_rdev;
+	unsigned long  st_size;
+	unsigned long  st_atime;
+	unsigned long  st_mtime;
+	unsigned long  st_ctime;
+};
+
+struct stat {
+	unsigned short	st_dev;
+	unsigned long	st_ino;
+	unsigned short	st_mode;
+	short		st_nlink;
+	unsigned short	st_uid;
+	unsigned short	st_gid;
+	unsigned short	st_rdev;
+	long		st_size;
+	long		st_atime;
+	unsigned long	st_atime_nsec;
+	long		st_mtime;
+	unsigned long	st_mtime_nsec;
+	long		st_ctime;
+	unsigned long	st_ctime_nsec;
+	long		st_blksize;
+	long		st_blocks;
+	unsigned long	__unused4[2];
+};
+
+#define STAT_HAVE_NSEC 1
+
+struct stat64 {
+	unsigned long long st_dev;
+
+	unsigned long long st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+
+	unsigned long long st_rdev;
+
+	unsigned char	__pad3[8];
+
+	long long	st_size;
+	unsigned int	st_blksize;
+
+	unsigned char	__pad4[8];
+	unsigned int	st_blocks;
+
+	unsigned int	st_atime;
+	unsigned int	st_atime_nsec;
+
+	unsigned int	st_mtime;
+	unsigned int	st_mtime_nsec;
+
+	unsigned int	st_ctime;
+	unsigned int	st_ctime_nsec;
+
+	unsigned int	__unused4;
+	unsigned int	__unused5;
+};
+
+#endif
diff --git a/arch/sparc/include/asm/stat_64.h b/arch/sparc/include/asm/stat_64.h
new file mode 100644
index 000000000000..9650fdea847f
--- /dev/null
+++ b/arch/sparc/include/asm/stat_64.h
@@ -0,0 +1,47 @@
+#ifndef _SPARC64_STAT_H
+#define _SPARC64_STAT_H
+
+#include <linux/types.h>
+
+struct stat {
+	unsigned   st_dev;
+	ino_t   st_ino;
+	mode_t  st_mode;
+	short   st_nlink;
+	uid_t   st_uid;
+	gid_t   st_gid;
+	unsigned   st_rdev;
+	off_t   st_size;
+	time_t  st_atime;
+	time_t  st_mtime;
+	time_t  st_ctime;
+	off_t   st_blksize;
+	off_t   st_blocks;
+	unsigned long  __unused4[2];
+};
+
+struct stat64 {
+	unsigned long	st_dev;
+	unsigned long	st_ino;
+	unsigned long	st_nlink;
+
+	unsigned int	st_mode;
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+	unsigned int	__pad0;
+
+	unsigned long	st_rdev;
+	long		st_size;
+	long		st_blksize;
+	long		st_blocks;
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+	long		__unused[3];
+};
+
+#endif
diff --git a/arch/sparc/include/asm/statfs.h b/arch/sparc/include/asm/statfs.h
new file mode 100644
index 000000000000..5e937a73743d
--- /dev/null
+++ b/arch/sparc/include/asm/statfs.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STATFS_H
+#define ___ASM_SPARC_STATFS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/statfs_64.h>
+#else
+#include <asm/statfs_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/statfs_32.h b/arch/sparc/include/asm/statfs_32.h
new file mode 100644
index 000000000000..304520fa8863
--- /dev/null
+++ b/arch/sparc/include/asm/statfs_32.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_STATFS_H
+#define _SPARC_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif
diff --git a/arch/sparc/include/asm/statfs_64.h b/arch/sparc/include/asm/statfs_64.h
new file mode 100644
index 000000000000..79b3c890a5fa
--- /dev/null
+++ b/arch/sparc/include/asm/statfs_64.h
@@ -0,0 +1,54 @@
+#ifndef _SPARC64_STATFS_H
+#define _SPARC64_STATFS_H
+
+#ifndef __KERNEL_STRICT_NAMES
+
+#include <linux/types.h>
+
+typedef __kernel_fsid_t	fsid_t;
+
+#endif
+
+struct statfs {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct statfs64 {
+	long f_type;
+	long f_bsize;
+	long f_blocks;
+	long f_bfree;
+	long f_bavail;
+	long f_files;
+	long f_ffree;
+	__kernel_fsid_t f_fsid;
+	long f_namelen;
+	long f_frsize;
+	long f_spare[5];
+};
+
+struct compat_statfs64 {
+	__u32 f_type;
+	__u32 f_bsize;
+	__u64 f_blocks;
+	__u64 f_bfree;
+	__u64 f_bavail;
+	__u64 f_files;
+	__u64 f_ffree;
+	__kernel_fsid_t f_fsid;
+	__u32 f_namelen;
+	__u32 f_frsize;
+	__u32 f_spare[5];
+};
+
+#endif
diff --git a/arch/sparc/include/asm/string.h b/arch/sparc/include/asm/string.h
new file mode 100644
index 000000000000..98b72a0c8e6e
--- /dev/null
+++ b/arch/sparc/include/asm/string.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_STRING_H
+#define ___ASM_SPARC_STRING_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/string_64.h>
+#else
+#include <asm/string_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/string_32.h b/arch/sparc/include/asm/string_32.h
new file mode 100644
index 000000000000..6c5fddb7e6b5
--- /dev/null
+++ b/arch/sparc/include/asm/string_32.h
@@ -0,0 +1,205 @@
+/*
+ * string.h: External definitions for optimized assembly string
+ *           routines for the Linux Kernel.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __SPARC_STRING_H__
+#define __SPARC_STRING_H__
+
+#include <asm/page.h>
+
+/* Really, userland/ksyms should not see any of this stuff. */
+
+#ifdef __KERNEL__
+
+extern void __memmove(void *,const void *,__kernel_size_t);
+extern __kernel_size_t __memcpy(void *,const void *,__kernel_size_t);
+extern __kernel_size_t __memset(void *,int,__kernel_size_t);
+
+#ifndef EXPORT_SYMTAB_STROPS
+
+/* First the mem*() things. */
+#define __HAVE_ARCH_MEMMOVE
+#undef memmove
+#define memmove(_to, _from, _n) \
+({ \
+	void *_t = (_to); \
+	__memmove(_t, (_from), (_n)); \
+	_t; \
+})
+
+#define __HAVE_ARCH_MEMCPY
+
+static inline void *__constant_memcpy(void *to, const void *from, __kernel_size_t n)
+{
+	extern void __copy_1page(void *, const void *);
+
+	if(n <= 32) {
+		__builtin_memcpy(to, from, n);
+	} else if (((unsigned int) to & 7) != 0) {
+		/* Destination is not aligned on the double-word boundary */
+		__memcpy(to, from, n);
+	} else {
+		switch(n) {
+		case PAGE_SIZE:
+			__copy_1page(to, from);
+			break;
+		default:
+			__memcpy(to, from, n);
+			break;
+		}
+	}
+	return to;
+}
+
+static inline void *__nonconstant_memcpy(void *to, const void *from, __kernel_size_t n)
+{
+	__memcpy(to, from, n);
+	return to;
+}
+
+#undef memcpy
+#define memcpy(t, f, n) \
+(__builtin_constant_p(n) ? \
+ __constant_memcpy((t),(f),(n)) : \
+ __nonconstant_memcpy((t),(f),(n)))
+
+#define __HAVE_ARCH_MEMSET
+
+static inline void *__constant_c_and_count_memset(void *s, char c, __kernel_size_t count)
+{
+	extern void bzero_1page(void *);
+	extern __kernel_size_t __bzero(void *, __kernel_size_t);
+
+	if(!c) {
+		if(count == PAGE_SIZE)
+			bzero_1page(s);
+		else
+			__bzero(s, count);
+	} else {
+		__memset(s, c, count);
+	}
+	return s;
+}
+
+static inline void *__constant_c_memset(void *s, char c, __kernel_size_t count)
+{
+	extern __kernel_size_t __bzero(void *, __kernel_size_t);
+
+	if(!c)
+		__bzero(s, count);
+	else
+		__memset(s, c, count);
+	return s;
+}
+
+static inline void *__nonconstant_memset(void *s, char c, __kernel_size_t count)
+{
+	__memset(s, c, count);
+	return s;
+}
+
+#undef memset
+#define memset(s, c, count) \
+(__builtin_constant_p(c) ? (__builtin_constant_p(count) ? \
+                            __constant_c_and_count_memset((s), (c), (count)) : \
+                            __constant_c_memset((s), (c), (count))) \
+                          : __nonconstant_memset((s), (c), (count)))
+
+#define __HAVE_ARCH_MEMSCAN
+
+#undef memscan
+#define memscan(__arg0, __char, __arg2)						\
+({										\
+	extern void *__memscan_zero(void *, size_t);				\
+	extern void *__memscan_generic(void *, int, size_t);			\
+	void *__retval, *__addr = (__arg0);					\
+	size_t __size = (__arg2);						\
+										\
+	if(__builtin_constant_p(__char) && !(__char))				\
+		__retval = __memscan_zero(__addr, __size);			\
+	else									\
+		__retval = __memscan_generic(__addr, (__char), __size);		\
+										\
+	__retval;								\
+})
+
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *,const void *,__kernel_size_t);
+
+/* Now the str*() stuff... */
+#define __HAVE_ARCH_STRLEN
+extern __kernel_size_t strlen(const char *);
+
+#define __HAVE_ARCH_STRNCMP
+
+extern int __strncmp(const char *, const char *, __kernel_size_t);
+
+static inline int __constant_strncmp(const char *src, const char *dest, __kernel_size_t count)
+{
+	register int retval;
+	switch(count) {
+	case 0: return 0;
+	case 1: return (src[0] - dest[0]);
+	case 2: retval = (src[0] - dest[0]);
+		if(!retval && src[0])
+		  retval = (src[1] - dest[1]);
+		return retval;
+	case 3: retval = (src[0] - dest[0]);
+		if(!retval && src[0]) {
+		  retval = (src[1] - dest[1]);
+		  if(!retval && src[1])
+		    retval = (src[2] - dest[2]);
+		}
+		return retval;
+	case 4: retval = (src[0] - dest[0]);
+		if(!retval && src[0]) {
+		  retval = (src[1] - dest[1]);
+		  if(!retval && src[1]) {
+		    retval = (src[2] - dest[2]);
+		    if (!retval && src[2])
+		      retval = (src[3] - dest[3]);
+		  }
+		}
+		return retval;
+	case 5: retval = (src[0] - dest[0]);
+		if(!retval && src[0]) {
+		  retval = (src[1] - dest[1]);
+		  if(!retval && src[1]) {
+		    retval = (src[2] - dest[2]);
+		    if (!retval && src[2]) {
+		      retval = (src[3] - dest[3]);
+		      if (!retval && src[3])
+		        retval = (src[4] - dest[4]);
+		    }
+		  }
+		}
+		return retval;
+	default:
+		retval = (src[0] - dest[0]);
+		if(!retval && src[0]) {
+		  retval = (src[1] - dest[1]);
+		  if(!retval && src[1]) {
+		    retval = (src[2] - dest[2]);
+		    if(!retval && src[2])
+		      retval = __strncmp(src+3,dest+3,count-3);
+		  }
+		}
+		return retval;
+	}
+}
+
+#undef strncmp
+#define strncmp(__arg0, __arg1, __arg2)	\
+(__builtin_constant_p(__arg2) ?	\
+ __constant_strncmp(__arg0, __arg1, __arg2) : \
+ __strncmp(__arg0, __arg1, __arg2))
+
+#endif /* !EXPORT_SYMTAB_STROPS */
+
+#endif /* __KERNEL__ */
+
+#endif /* !(__SPARC_STRING_H__) */
diff --git a/arch/sparc/include/asm/string_64.h b/arch/sparc/include/asm/string_64.h
new file mode 100644
index 000000000000..43161f2d17eb
--- /dev/null
+++ b/arch/sparc/include/asm/string_64.h
@@ -0,0 +1,83 @@
+/*
+ * string.h: External definitions for optimized assembly string
+ *           routines for the Linux Kernel.
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,1997,1999 Jakub Jelinek (jakub@redhat.com)
+ */
+
+#ifndef __SPARC64_STRING_H__
+#define __SPARC64_STRING_H__
+
+/* Really, userland/ksyms should not see any of this stuff. */
+
+#ifdef __KERNEL__
+
+#include <asm/asi.h>
+
+extern void *__memset(void *,int,__kernel_size_t);
+
+#ifndef EXPORT_SYMTAB_STROPS
+
+/* First the mem*() things. */
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMSET
+extern void *__builtin_memset(void *,int,__kernel_size_t);
+
+static inline void *__constant_memset(void *s, int c, __kernel_size_t count)
+{
+	extern __kernel_size_t __bzero(void *, __kernel_size_t);
+
+	if (!c) {
+		__bzero(s, count);
+		return s;
+	} else
+		return __memset(s, c, count);
+}
+
+#undef memset
+#define memset(s, c, count) \
+((__builtin_constant_p(count) && (count) <= 32) ? \
+ __builtin_memset((s), (c), (count)) : \
+ (__builtin_constant_p(c) ? \
+  __constant_memset((s), (c), (count)) : \
+  __memset((s), (c), (count))))
+
+#define __HAVE_ARCH_MEMSCAN
+
+#undef memscan
+#define memscan(__arg0, __char, __arg2)					\
+({									\
+	extern void *__memscan_zero(void *, size_t);			\
+	extern void *__memscan_generic(void *, int, size_t);		\
+	void *__retval, *__addr = (__arg0);				\
+	size_t __size = (__arg2);					\
+									\
+	if(__builtin_constant_p(__char) && !(__char))			\
+		__retval = __memscan_zero(__addr, __size);		\
+	else								\
+		__retval = __memscan_generic(__addr, (__char), __size);	\
+									\
+	__retval;							\
+})
+
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *,const void *,__kernel_size_t);
+
+/* Now the str*() stuff... */
+#define __HAVE_ARCH_STRLEN
+extern __kernel_size_t strlen(const char *);
+
+#define __HAVE_ARCH_STRNCMP
+extern int strncmp(const char *, const char *, __kernel_size_t);
+
+#endif /* !EXPORT_SYMTAB_STROPS */
+
+#endif /* __KERNEL__ */
+
+#endif /* !(__SPARC64_STRING_H__) */
diff --git a/arch/sparc/include/asm/sun4paddr.h b/arch/sparc/include/asm/sun4paddr.h
new file mode 100644
index 000000000000..d52985f19f42
--- /dev/null
+++ b/arch/sparc/include/asm/sun4paddr.h
@@ -0,0 +1,56 @@
+/*
+ * sun4paddr.h:  Various physical addresses on sun4 machines
+ *
+ * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au)
+ * Copyright (C) 1998 Chris Davis (cdavis@cois.on.ca)
+ * 
+ * Now supports more sun4's
+ */
+
+#ifndef _SPARC_SUN4PADDR_H
+#define _SPARC_SUN4PADDR_H
+
+#define SUN4_IE_PHYSADDR		0xf5000000
+#define SUN4_UNUSED_PHYSADDR		0
+
+/* these work for me */
+#define SUN4_200_MEMREG_PHYSADDR	0xf4000000
+#define SUN4_200_CLOCK_PHYSADDR		0xf3000000
+#define SUN4_200_BWTWO_PHYSADDR		0xfd000000
+#define SUN4_200_ETH_PHYSADDR		0xf6000000
+#define SUN4_200_SI_PHYSADDR		0xff200000
+
+/* these were here before */
+#define SUN4_300_MEMREG_PHYSADDR	0xf4000000
+#define SUN4_300_CLOCK_PHYSADDR		0xf2000000
+#define SUN4_300_TIMER_PHYSADDR		0xef000000
+#define SUN4_300_ETH_PHYSADDR		0xf9000000
+#define SUN4_300_BWTWO_PHYSADDR		0xfb400000
+#define SUN4_300_DMA_PHYSADDR		0xfa001000
+#define SUN4_300_ESP_PHYSADDR		0xfa000000
+
+/* Are these right? */
+#define SUN4_400_MEMREG_PHYSADDR	0xf4000000
+#define SUN4_400_CLOCK_PHYSADDR		0xf2000000
+#define SUN4_400_TIMER_PHYSADDR		0xef000000
+#define SUN4_400_ETH_PHYSADDR		0xf9000000
+#define SUN4_400_BWTWO_PHYSADDR		0xfb400000
+#define SUN4_400_DMA_PHYSADDR		0xfa001000
+#define SUN4_400_ESP_PHYSADDR		0xfa000000
+
+/* 
+	these are the actual values set and used in the code. Unused items set 
+	to SUN_UNUSED_PHYSADDR 
+ */
+
+extern int sun4_memreg_physaddr; /* memory register (ecc?) */
+extern int sun4_clock_physaddr;  /* system clock */
+extern int sun4_timer_physaddr;  /* timer, where applicable */
+extern int sun4_eth_physaddr;    /* onboard ethernet (ie/le) */
+extern int sun4_si_physaddr;     /* sun3 scsi adapter */
+extern int sun4_bwtwo_physaddr;  /* onboard bw2 */
+extern int sun4_dma_physaddr;    /* scsi dma */
+extern int sun4_esp_physaddr;    /* esp scsi */
+extern int sun4_ie_physaddr;     /* interrupt enable */
+
+#endif /* !(_SPARC_SUN4PADDR_H) */
diff --git a/arch/sparc/include/asm/sun4prom.h b/arch/sparc/include/asm/sun4prom.h
new file mode 100644
index 000000000000..9c8b4cbf629a
--- /dev/null
+++ b/arch/sparc/include/asm/sun4prom.h
@@ -0,0 +1,83 @@
+/*
+ * sun4prom.h -- interface to sun4 PROM monitor.  We don't use most of this,
+ *               so most of these are just placeholders.
+ */
+
+#ifndef _SUN4PROM_H_
+#define _SUN4PROM_H_
+
+/*
+ * Although this looks similar to an romvec for a OpenProm machine, it is 
+ * actually closer to what was used in the Sun2 and Sun3.
+ *
+ * V2 entries exist only in version 2 PROMs and later, V3 in version 3 and later.
+ * 
+ * Many of the function prototypes are guesses.  Some are certainly wrong.
+ * Use with care.
+ */
+
+typedef struct {
+	char		*initSP;		/* Initial system stack ptr */
+	void		(*startmon)(void);	/* Initial PC for hardware */
+	int		*diagberr;		/* Bus err handler for diags */
+	struct linux_arguments_v0 **bootParam; /* Info for bootstrapped pgm */
+ 	unsigned int	*memorysize;		/* Usable memory in bytes */
+	unsigned char	(*getchar)(void);	/* Get char from input device */ 
+	void		(*putchar)(char);	/* Put char to output device */
+	int		(*mayget)(void);	/* Maybe get char, or -1 */
+	int		(*mayput)(int);		/* Maybe put char, or -1 */
+	unsigned char	*echo;			/* Should getchar echo? */
+	unsigned char	*insource;		/* Input source selector */
+	unsigned char	*outsink;		/* Output sink selector */
+	int		(*getkey)(void);	/* Get next key if one exists */
+	void		(*initgetkey)(void);	/* Initialize get key */
+	unsigned int	*translation;		/* Kbd translation selector */
+	unsigned char	*keybid;		/* Keyboard ID byte */
+	int		*screen_x;		/* V2: Screen x pos (r/o) */
+	int		*screen_y;		/* V2: Screen y pos (r/o) */
+	struct keybuf	*keybuf;		/* Up/down keycode buffer */
+	char		*monid;			/* Monitor version ID */
+	void		(*fbwritechar)(char);	/* Write a character to FB */
+	int		*fbAddr;		/* Address of frame buffer */
+	char		**font;			/* Font table for FB */
+	void		(*fbwritestr)(char *);	/* Write string to FB */
+	void		(*reboot)(char *);	/* e.g. reboot("sd()vmlinux") */
+	unsigned char	*linebuf;		/* The line input buffer */
+	unsigned char	**lineptr;		/* Cur pointer into linebuf */
+	int		*linesize;		/* length of line in linebuf */
+	void		(*getline)(char *);	/* Get line from user */
+	unsigned char	(*getnextchar)(void);	/* Get next char from linebuf */
+	unsigned char	(*peeknextchar)(void);	/* Peek at next char */
+	int		*fbthere;		/* =1 if frame buffer there */
+	int		(*getnum)(void);	/* Grab hex num from line */
+	int		(*printf)(char *, ...);	/* See prom_printf() instead */ 
+	void		(*printhex)(int);	/* Format N digits in hex */
+	unsigned char	*leds;			/* RAM copy of LED register */
+	void		(*setLEDs)(unsigned char *);	/* Sets LED's and RAM copy */
+	void		(*NMIaddr)(void *);	/* Addr for level 7 vector */
+	void		(*abortentry)(void);	/* Entry for keyboard abort */
+	int		*nmiclock;		/* Counts up in msec */
+	int		*FBtype;		/* Frame buffer type */
+ 	unsigned int	romvecversion;		/* Version number for this romvec */
+	struct globram  *globram;		/* monitor global variables ??? */
+	void *		kbdaddr;		/* Addr of keyboard in use */
+	int		*keyrinit;		/* ms before kbd repeat */
+	unsigned char	*keyrtick; 		/* ms between repetitions */
+	unsigned int	*memoryavail;		/* V1: Main mem usable size */
+	long		*resetaddr;		/* where to jump on a reset */
+	long		*resetmap;		/* pgmap entry for resetaddr */
+	void		(*exittomon)(void);	/* Exit from user program */
+	unsigned char	**memorybitmap;		/* V1: &{0 or &bits} */
+	void		(*setcxsegmap)(int ctxt, char *va, int pmeg);	/* Set seg in any context */
+	void		(**vector_cmd)(void *);	/* V2: Handler for 'v' cmd */
+	unsigned long	*expectedtrapsig;	/* V3: Location of the expected trap signal */
+	unsigned long	*trapvectorbasetable;	/* V3: Address of the trap vector table */
+	int		unused1;
+	int		unused2;
+	int		unused3;
+	int		unused4;
+} linux_sun4_romvec;
+
+extern linux_sun4_romvec *sun4_romvec;
+
+#endif /* _SUN4PROM_H_ */
diff --git a/arch/sparc/include/asm/sunbpp.h b/arch/sparc/include/asm/sunbpp.h
new file mode 100644
index 000000000000..d81a02eaf78b
--- /dev/null
+++ b/arch/sparc/include/asm/sunbpp.h
@@ -0,0 +1,80 @@
+/*
+ * include/asm/sunbpp.h
+ */
+
+#ifndef _ASM_SPARC_SUNBPP_H
+#define _ASM_SPARC_SUNBPP_H
+
+struct bpp_regs {
+  /* DMA registers */
+  __volatile__ __u32 p_csr;		/* DMA Control/Status Register */
+  __volatile__ __u32 p_addr;		/* Address Register */
+  __volatile__ __u32 p_bcnt;		/* Byte Count Register */
+  __volatile__ __u32 p_tst_csr;		/* Test Control/Status (DMA2 only) */
+  /* Parallel Port registers */
+  __volatile__ __u16 p_hcr;		/* Hardware Configuration Register */
+  __volatile__ __u16 p_ocr;		/* Operation Configuration Register */
+  __volatile__ __u8 p_dr;		/* Parallel Data Register */
+  __volatile__ __u8 p_tcr;		/* Transfer Control Register */
+  __volatile__ __u8 p_or;		/* Output Register */
+  __volatile__ __u8 p_ir;		/* Input Register */
+  __volatile__ __u16 p_icr;		/* Interrupt Control Register */
+};
+
+/* P_HCR. Time is in increments of SBus clock. */
+#define P_HCR_TEST      0x8000      /* Allows buried counters to be read */
+#define P_HCR_DSW       0x7f00      /* Data strobe width (in ticks) */
+#define P_HCR_DDS       0x007f      /* Data setup before strobe (in ticks) */
+
+/* P_OCR. */
+#define P_OCR_MEM_CLR   0x8000
+#define P_OCR_DATA_SRC  0x4000      /* )                  */
+#define P_OCR_DS_DSEL   0x2000      /* )  Bidirectional      */
+#define P_OCR_BUSY_DSEL 0x1000      /* )    selects            */
+#define P_OCR_ACK_DSEL  0x0800      /* )                  */
+#define P_OCR_EN_DIAG   0x0400
+#define P_OCR_BUSY_OP   0x0200      /* Busy operation */
+#define P_OCR_ACK_OP    0x0100      /* Ack operation */
+#define P_OCR_SRST      0x0080      /* Reset state machines. Not selfcleaning. */
+#define P_OCR_IDLE      0x0008      /* PP data transfer state machine is idle */
+#define P_OCR_V_ILCK    0x0002      /* Versatec faded. Zebra only. */
+#define P_OCR_EN_VER    0x0001      /* Enable Versatec (0 - enable). Zebra only. */
+
+/* P_TCR */
+#define P_TCR_DIR       0x08
+#define P_TCR_BUSY      0x04
+#define P_TCR_ACK       0x02
+#define P_TCR_DS        0x01        /* Strobe */
+
+/* P_OR */
+#define P_OR_V3         0x20        /* )                 */
+#define P_OR_V2         0x10        /* ) on Zebra only   */
+#define P_OR_V1         0x08        /* )                 */
+#define P_OR_INIT       0x04
+#define P_OR_AFXN       0x02        /* Auto Feed */
+#define P_OR_SLCT_IN    0x01
+
+/* P_IR */
+#define P_IR_PE         0x04
+#define P_IR_SLCT       0x02
+#define P_IR_ERR        0x01
+
+/* P_ICR */
+#define P_DS_IRQ        0x8000      /* RW1  */
+#define P_ACK_IRQ       0x4000      /* RW1  */
+#define P_BUSY_IRQ      0x2000      /* RW1  */
+#define P_PE_IRQ        0x1000      /* RW1  */
+#define P_SLCT_IRQ      0x0800      /* RW1  */
+#define P_ERR_IRQ       0x0400      /* RW1  */
+#define P_DS_IRQ_EN     0x0200      /* RW   Always on rising edge */
+#define P_ACK_IRQ_EN    0x0100      /* RW   Always on rising edge */
+#define P_BUSY_IRP      0x0080      /* RW   1= rising edge */
+#define P_BUSY_IRQ_EN   0x0040      /* RW   */
+#define P_PE_IRP        0x0020      /* RW   1= rising edge */
+#define P_PE_IRQ_EN     0x0010      /* RW   */
+#define P_SLCT_IRP      0x0008      /* RW   1= rising edge */
+#define P_SLCT_IRQ_EN   0x0004      /* RW   */
+#define P_ERR_IRP       0x0002      /* RW1  1= rising edge */
+#define P_ERR_IRQ_EN    0x0001      /* RW   */
+
+#endif /* !(_ASM_SPARC_SUNBPP_H) */
diff --git a/arch/sparc/include/asm/swift.h b/arch/sparc/include/asm/swift.h
new file mode 100644
index 000000000000..e535061bf755
--- /dev/null
+++ b/arch/sparc/include/asm/swift.h
@@ -0,0 +1,106 @@
+/* swift.h: Specific definitions for the _broken_ Swift SRMMU
+ *          MMU module.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SWIFT_H
+#define _SPARC_SWIFT_H
+
+/* Swift is so brain damaged, here is the mmu control register. */
+#define SWIFT_ST       0x00800000   /* SW tablewalk enable */
+#define SWIFT_WP       0x00400000   /* Watchpoint enable   */
+
+/* Branch folding (buggy, disable on production systems!)  */
+#define SWIFT_BF       0x00200000
+#define SWIFT_PMC      0x00180000   /* Page mode control   */
+#define SWIFT_PE       0x00040000   /* Parity enable       */
+#define SWIFT_PC       0x00020000   /* Parity control      */
+#define SWIFT_AP       0x00010000   /* Graphics page mode control (TCX/SX) */
+#define SWIFT_AC       0x00008000   /* Alternate Cacheability (see viking.h) */
+#define SWIFT_BM       0x00004000   /* Boot mode */
+#define SWIFT_RC       0x00003c00   /* DRAM refresh control */
+#define SWIFT_IE       0x00000200   /* Instruction cache enable */
+#define SWIFT_DE       0x00000100   /* Data cache enable */
+#define SWIFT_SA       0x00000080   /* Store Allocate */
+#define SWIFT_NF       0x00000002   /* No fault mode */
+#define SWIFT_EN       0x00000001   /* MMU enable */
+
+/* Bits [13:5] select one of 512 instruction cache tags */
+static inline void swift_inv_insn_tag(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_TXTC_TAG)
+			     : "memory");
+}
+
+/* Bits [12:4] select one of 512 data cache tags */
+static inline void swift_inv_data_tag(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_DATAC_TAG)
+			     : "memory");
+}
+
+static inline void swift_flush_dcache(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < 0x2000; addr += 0x10)
+		swift_inv_data_tag(addr);
+}
+
+static inline void swift_flush_icache(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < 0x4000; addr += 0x20)
+		swift_inv_insn_tag(addr);
+}
+
+static inline void swift_idflash_clear(void)
+{
+	unsigned long addr;
+
+	for (addr = 0; addr < 0x2000; addr += 0x10) {
+		swift_inv_insn_tag(addr<<1);
+		swift_inv_data_tag(addr);
+	}
+}
+
+/* Swift is so broken, it isn't even safe to use the following. */
+static inline void swift_flush_page(unsigned long page)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (page), "i" (ASI_M_FLUSH_PAGE)
+			     : "memory");
+}
+
+static inline void swift_flush_segment(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_FLUSH_SEG)
+			     : "memory");
+}
+
+static inline void swift_flush_region(unsigned long addr)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_FLUSH_REGION)
+			     : "memory");
+}
+
+static inline void swift_flush_context(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_FLUSH_CTX)
+			     : "memory");
+}
+
+#endif /* !(_SPARC_SWIFT_H) */
diff --git a/arch/sparc/include/asm/syscall.h b/arch/sparc/include/asm/syscall.h
new file mode 100644
index 000000000000..7486c605e23c
--- /dev/null
+++ b/arch/sparc/include/asm/syscall.h
@@ -0,0 +1,120 @@
+#ifndef __ASM_SPARC_SYSCALL_H
+#define __ASM_SPARC_SYSCALL_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+/* The system call number is given by the user in %g1 */
+static inline long syscall_get_nr(struct task_struct *task,
+				  struct pt_regs *regs)
+{
+	int syscall_p = pt_regs_is_syscall(regs);
+
+	return (syscall_p ? regs->u_regs[UREG_G1] : -1L);
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+				    struct pt_regs *regs)
+{
+	/* XXX This needs some thought.  On Sparc we don't
+	 * XXX save away the original %o0 value somewhere.
+	 * XXX Instead we hold it in register %l5 at the top
+	 * XXX level trap frame and pass this down to the signal
+	 * XXX dispatch code which is the only place that value
+	 * XXX ever was needed.
+	 */
+}
+
+#ifdef CONFIG_SPARC32
+static inline bool syscall_has_error(struct pt_regs *regs)
+{
+	return (regs->psr & PSR_C) ? true : false;
+}
+static inline void syscall_set_error(struct pt_regs *regs)
+{
+	regs->psr |= PSR_C;
+}
+static inline void syscall_clear_error(struct pt_regs *regs)
+{
+	regs->psr &= ~PSR_C;
+}
+#else
+static inline bool syscall_has_error(struct pt_regs *regs)
+{
+	return (regs->tstate & (TSTATE_XCARRY | TSTATE_ICARRY)) ? true : false;
+}
+static inline void syscall_set_error(struct pt_regs *regs)
+{
+	regs->tstate |= (TSTATE_XCARRY | TSTATE_ICARRY);
+}
+static inline void syscall_clear_error(struct pt_regs *regs)
+{
+	regs->tstate &= ~(TSTATE_XCARRY | TSTATE_ICARRY);
+}
+#endif
+
+static inline long syscall_get_error(struct task_struct *task,
+				     struct pt_regs *regs)
+{
+	long val = regs->u_regs[UREG_I0];
+
+	return (syscall_has_error(regs) ? -val : 0);
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	long val = regs->u_regs[UREG_I0];
+
+	return val;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+					    struct pt_regs *regs,
+					    int error, long val)
+{
+	if (error) {
+		syscall_set_error(regs);
+		regs->u_regs[UREG_I0] = -error;
+	} else {
+		syscall_clear_error(regs);
+		regs->u_regs[UREG_I0] = val;
+	}
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 unsigned long *args)
+{
+	int zero_extend = 0;
+	unsigned int j;
+
+#ifdef CONFIG_SPARC64
+	if (test_tsk_thread_flag(task, TIF_32BIT))
+		zero_extend = 1;
+#endif
+
+	for (j = 0; j < n; j++) {
+		unsigned long val = regs->u_regs[UREG_I0 + i + j];
+
+		if (zero_extend)
+			args[j] = (u32) val;
+		else
+			args[j] = val;
+	}
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned int i, unsigned int n,
+					 const unsigned long *args)
+{
+	unsigned int j;
+
+	for (j = 0; j < n; j++)
+		regs->u_regs[UREG_I0 + i + j] = args[j];
+}
+
+#endif /* __ASM_SPARC_SYSCALL_H */
diff --git a/arch/sparc/include/asm/syscalls.h b/arch/sparc/include/asm/syscalls.h
new file mode 100644
index 000000000000..45a43f637a14
--- /dev/null
+++ b/arch/sparc/include/asm/syscalls.h
@@ -0,0 +1,13 @@
+#ifndef _SPARC64_SYSCALLS_H
+#define _SPARC64_SYSCALLS_H
+
+struct pt_regs;
+
+extern asmlinkage long sparc_do_fork(unsigned long clone_flags,
+				     unsigned long stack_start,
+				     struct pt_regs *regs,
+				     unsigned long stack_size);
+
+extern asmlinkage int sparc_execve(struct pt_regs *regs);
+
+#endif /* _SPARC64_SYSCALLS_H */
diff --git a/arch/sparc/include/asm/sysen.h b/arch/sparc/include/asm/sysen.h
new file mode 100644
index 000000000000..6af34abde6e7
--- /dev/null
+++ b/arch/sparc/include/asm/sysen.h
@@ -0,0 +1,15 @@
+/*
+ * sysen.h:  Bit fields within the "System Enable" register accessed via
+ *           the ASI_CONTROL address space at address AC_SYSENABLE.
+ *
+ * Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_SYSEN_H
+#define _SPARC_SYSEN_H
+
+#define SENABLE_DVMA   0x20   /* enable dvma transfers */
+#define SENABLE_CACHE  0x10   /* enable VAC cache */
+#define SENABLE_RESET  0x04   /* reset whole machine, danger Will Robinson */
+
+#endif /* _SPARC_SYSEN_H */
diff --git a/arch/sparc/include/asm/system.h b/arch/sparc/include/asm/system.h
new file mode 100644
index 000000000000..7944a7cfc996
--- /dev/null
+++ b/arch/sparc/include/asm/system.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_SYSTEM_H
+#define ___ASM_SPARC_SYSTEM_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/system_64.h>
+#else
+#include <asm/system_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/system_32.h b/arch/sparc/include/asm/system_32.h
new file mode 100644
index 000000000000..b4b024445fc9
--- /dev/null
+++ b/arch/sparc/include/asm/system_32.h
@@ -0,0 +1,288 @@
+#ifndef __SPARC_SYSTEM_H
+#define __SPARC_SYSTEM_H
+
+#include <linux/kernel.h>
+#include <linux/threads.h>	/* NR_CPUS */
+#include <linux/thread_info.h>
+
+#include <asm/page.h>
+#include <asm/psr.h>
+#include <asm/ptrace.h>
+#include <asm/btfixup.h>
+#include <asm/smp.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/irqflags.h>
+
+/*
+ * Sparc (general) CPU types
+ */
+enum sparc_cpu {
+  sun4        = 0x00,
+  sun4c       = 0x01,
+  sun4m       = 0x02,
+  sun4d       = 0x03,
+  sun4e       = 0x04,
+  sun4u       = 0x05, /* V8 ploos ploos */
+  sun_unknown = 0x06,
+  ap1000      = 0x07, /* almost a sun4m */
+};
+
+/* Really, userland should not be looking at any of this... */
+#ifdef __KERNEL__
+
+extern enum sparc_cpu sparc_cpu_model;
+
+#ifndef CONFIG_SUN4
+#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c)
+#define ARCH_SUN4 0
+#else
+#define ARCH_SUN4C_SUN4 1
+#define ARCH_SUN4 1
+#endif
+
+#define SUN4M_NCPUS            4              /* Architectural limit of sun4m. */
+
+extern char reboot_command[];
+
+extern struct thread_info *current_set[NR_CPUS];
+
+extern unsigned long empty_bad_page;
+extern unsigned long empty_bad_page_table;
+extern unsigned long empty_zero_page;
+
+extern void sun_do_break(void);
+extern int serial_console;
+extern int stop_a_enabled;
+
+static inline int con_is_present(void)
+{
+	return serial_console ? 0 : 1;
+}
+
+/* When a context switch happens we must flush all user windows so that
+ * the windows of the current process are flushed onto its stack. This
+ * way the windows are all clean for the next process and the stack
+ * frames are up to date.
+ */
+extern void flush_user_windows(void);
+extern void kill_user_windows(void);
+extern void synchronize_user_stack(void);
+extern void fpsave(unsigned long *fpregs, unsigned long *fsr,
+		   void *fpqueue, unsigned long *fpqdepth);
+
+#ifdef CONFIG_SMP
+#define SWITCH_ENTER(prv) \
+	do {			\
+	if (test_tsk_thread_flag(prv, TIF_USEDFPU)) { \
+		put_psr(get_psr() | PSR_EF); \
+		fpsave(&(prv)->thread.float_regs[0], &(prv)->thread.fsr, \
+		       &(prv)->thread.fpqueue[0], &(prv)->thread.fpqdepth); \
+		clear_tsk_thread_flag(prv, TIF_USEDFPU); \
+		(prv)->thread.kregs->psr &= ~PSR_EF; \
+	} \
+	} while(0)
+
+#define SWITCH_DO_LAZY_FPU(next)	/* */
+#else
+#define SWITCH_ENTER(prv)		/* */
+#define SWITCH_DO_LAZY_FPU(nxt)	\
+	do {			\
+	if (last_task_used_math != (nxt))		\
+		(nxt)->thread.kregs->psr&=~PSR_EF;	\
+	} while(0)
+#endif
+
+extern void flushw_all(void);
+
+/*
+ * Flush windows so that the VM switch which follows
+ * would not pull the stack from under us.
+ *
+ * SWITCH_ENTER and SWITH_DO_LAZY_FPU do not work yet (e.g. SMP does not work)
+ * XXX WTF is the above comment? Found in late teen 2.4.x.
+ */
+#define prepare_arch_switch(next) do { \
+	__asm__ __volatile__( \
+	".globl\tflush_patch_switch\nflush_patch_switch:\n\t" \
+	"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
+	"save %sp, -0x40, %sp; save %sp, -0x40, %sp; save %sp, -0x40, %sp\n\t" \
+	"save %sp, -0x40, %sp\n\t" \
+	"restore; restore; restore; restore; restore; restore; restore"); \
+} while(0)
+
+	/* Much care has gone into this code, do not touch it.
+	 *
+	 * We need to loadup regs l0/l1 for the newly forked child
+	 * case because the trap return path relies on those registers
+	 * holding certain values, gcc is told that they are clobbered.
+	 * Gcc needs registers for 3 values in and 1 value out, so we
+	 * clobber every non-fixed-usage register besides l2/l3/o4/o5.  -DaveM
+	 *
+	 * Hey Dave, that do not touch sign is too much of an incentive
+	 * - Anton & Pete
+	 */
+#define switch_to(prev, next, last) do {						\
+	SWITCH_ENTER(prev);								\
+	SWITCH_DO_LAZY_FPU(next);							\
+	cpu_set(smp_processor_id(), next->active_mm->cpu_vm_mask);			\
+	__asm__ __volatile__(								\
+	"sethi	%%hi(here - 0x8), %%o7\n\t"						\
+	"mov	%%g6, %%g3\n\t"								\
+	"or	%%o7, %%lo(here - 0x8), %%o7\n\t"					\
+	"rd	%%psr, %%g4\n\t"							\
+	"std	%%sp, [%%g6 + %4]\n\t"							\
+	"rd	%%wim, %%g5\n\t"							\
+	"wr	%%g4, 0x20, %%psr\n\t"							\
+	"nop\n\t"									\
+	"std	%%g4, [%%g6 + %3]\n\t"							\
+	"ldd	[%2 + %3], %%g4\n\t"							\
+	"mov	%2, %%g6\n\t"								\
+	".globl	patchme_store_new_current\n"						\
+"patchme_store_new_current:\n\t"							\
+	"st	%2, [%1]\n\t"								\
+	"wr	%%g4, 0x20, %%psr\n\t"							\
+	"nop\n\t"									\
+	"nop\n\t"									\
+	"nop\n\t"	/* LEON needs all 3 nops: load to %sp depends on CWP. */		\
+	"ldd	[%%g6 + %4], %%sp\n\t"							\
+	"wr	%%g5, 0x0, %%wim\n\t"							\
+	"ldd	[%%sp + 0x00], %%l0\n\t"						\
+	"ldd	[%%sp + 0x38], %%i6\n\t"						\
+	"wr	%%g4, 0x0, %%psr\n\t"							\
+	"nop\n\t"									\
+	"nop\n\t"									\
+	"jmpl	%%o7 + 0x8, %%g0\n\t"							\
+	" ld	[%%g3 + %5], %0\n\t"							\
+	"here:\n"									\
+        : "=&r" (last)									\
+        : "r" (&(current_set[hard_smp_processor_id()])),	\
+	  "r" (task_thread_info(next)),				\
+	  "i" (TI_KPSR),					\
+	  "i" (TI_KSP),						\
+	  "i" (TI_TASK)						\
+	:       "g1", "g2", "g3", "g4", "g5",       "g7",	\
+	  "l0", "l1",       "l3", "l4", "l5", "l6", "l7",	\
+	  "i0", "i1", "i2", "i3", "i4", "i5",			\
+	  "o0", "o1", "o2", "o3",                   "o7");	\
+	} while(0)
+
+/* XXX Change this if we ever use a PSO mode kernel. */
+#define mb()	__asm__ __volatile__ ("" : : : "memory")
+#define rmb()	mb()
+#define wmb()	mb()
+#define read_barrier_depends()	do { } while(0)
+#define set_mb(__var, __value)  do { __var = __value; mb(); } while(0)
+#define smp_mb()	__asm__ __volatile__("":::"memory")
+#define smp_rmb()	__asm__ __volatile__("":::"memory")
+#define smp_wmb()	__asm__ __volatile__("":::"memory")
+#define smp_read_barrier_depends()	do { } while(0)
+
+#define nop() __asm__ __volatile__ ("nop")
+
+/* This has special calling conventions */
+#ifndef CONFIG_SMP
+BTFIXUPDEF_CALL(void, ___xchg32, void)
+#endif
+
+static inline unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val)
+{
+#ifdef CONFIG_SMP
+	__asm__ __volatile__("swap [%2], %0"
+			     : "=&r" (val)
+			     : "0" (val), "r" (m)
+			     : "memory");
+	return val;
+#else
+	register unsigned long *ptr asm("g1");
+	register unsigned long ret asm("g2");
+
+	ptr = (unsigned long *) m;
+	ret = val;
+
+	/* Note: this is magic and the nop there is
+	   really needed. */
+	__asm__ __volatile__(
+	"mov	%%o7, %%g4\n\t"
+	"call	___f____xchg32\n\t"
+	" nop\n\t"
+	: "=&r" (ret)
+	: "0" (ret), "r" (ptr)
+	: "g3", "g4", "g7", "memory", "cc");
+
+	return ret;
+#endif
+}
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size)
+{
+	switch (size) {
+	case 4:
+		return xchg_u32(ptr, x);
+	};
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+/* Emulate cmpxchg() the same way we emulate atomics,
+ * by hashing the object address and indexing into an array
+ * of spinlocks to get a bit of performance...
+ *
+ * See arch/sparc/lib/atomic32.c for implementation.
+ *
+ * Cribbed from <asm-parisc/atomic.h>
+ */
+#define __HAVE_ARCH_CMPXCHG	1
+
+/* bug catcher for when unsupported size is used - won't link */
+extern void __cmpxchg_called_with_bad_pointer(void);
+/* we only need to support cmpxchg of a u32 on sparc */
+extern unsigned long __cmpxchg_u32(volatile u32 *m, u32 old, u32 new_);
+
+/* don't worry...optimizer will get rid of most of this */
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new_, int size)
+{
+	switch (size) {
+	case 4:
+		return __cmpxchg_u32((u32 *)ptr, (u32)old, (u32)new_);
+	default:
+		__cmpxchg_called_with_bad_pointer();
+		break;
+	}
+	return old;
+}
+
+#define cmpxchg(ptr, o, n)						\
+({									\
+	__typeof__(*(ptr)) _o_ = (o);					\
+	__typeof__(*(ptr)) _n_ = (n);					\
+	(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,	\
+			(unsigned long)_n_, sizeof(*(ptr)));		\
+})
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)				  	       \
+	((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASSEMBLY__ */
+
+#define arch_align_stack(x) (x)
+
+#endif /* !(__SPARC_SYSTEM_H) */
diff --git a/arch/sparc/include/asm/system_64.h b/arch/sparc/include/asm/system_64.h
new file mode 100644
index 000000000000..db9e742a406a
--- /dev/null
+++ b/arch/sparc/include/asm/system_64.h
@@ -0,0 +1,355 @@
+#ifndef __SPARC64_SYSTEM_H
+#define __SPARC64_SYSTEM_H
+
+#include <asm/ptrace.h>
+#include <asm/processor.h>
+#include <asm/visasm.h>
+
+#ifndef __ASSEMBLY__
+
+#include <linux/irqflags.h>
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * Sparc (general) CPU types
+ */
+enum sparc_cpu {
+  sun4        = 0x00,
+  sun4c       = 0x01,
+  sun4m       = 0x02,
+  sun4d       = 0x03,
+  sun4e       = 0x04,
+  sun4u       = 0x05, /* V8 ploos ploos */
+  sun_unknown = 0x06,
+  ap1000      = 0x07, /* almost a sun4m */
+};
+
+#define sparc_cpu_model sun4u
+
+/* This cannot ever be a sun4c nor sun4 :) That's just history. */
+#define ARCH_SUN4C_SUN4 0
+#define ARCH_SUN4 0
+
+extern char reboot_command[];
+
+/* These are here in an effort to more fully work around Spitfire Errata
+ * #51.  Essentially, if a memory barrier occurs soon after a mispredicted
+ * branch, the chip can stop executing instructions until a trap occurs.
+ * Therefore, if interrupts are disabled, the chip can hang forever.
+ *
+ * It used to be believed that the memory barrier had to be right in the
+ * delay slot, but a case has been traced recently wherein the memory barrier
+ * was one instruction after the branch delay slot and the chip still hung.
+ * The offending sequence was the following in sym_wakeup_done() of the
+ * sym53c8xx_2 driver:
+ *
+ *	call	sym_ccb_from_dsa, 0
+ *	 movge	%icc, 0, %l0
+ *	brz,pn	%o0, .LL1303
+ *	 mov	%o0, %l2
+ *	membar	#LoadLoad
+ *
+ * The branch has to be mispredicted for the bug to occur.  Therefore, we put
+ * the memory barrier explicitly into a "branch always, predicted taken"
+ * delay slot to avoid the problem case.
+ */
+#define membar_safe(type) \
+do {	__asm__ __volatile__("ba,pt	%%xcc, 1f\n\t" \
+			     " membar	" type "\n" \
+			     "1:\n" \
+			     : : : "memory"); \
+} while (0)
+
+#define mb()	\
+	membar_safe("#LoadLoad | #LoadStore | #StoreStore | #StoreLoad")
+#define rmb()	\
+	membar_safe("#LoadLoad")
+#define wmb()	\
+	membar_safe("#StoreStore")
+#define membar_storeload() \
+	membar_safe("#StoreLoad")
+#define membar_storeload_storestore() \
+	membar_safe("#StoreLoad | #StoreStore")
+#define membar_storeload_loadload() \
+	membar_safe("#StoreLoad | #LoadLoad")
+#define membar_storestore_loadstore() \
+	membar_safe("#StoreStore | #LoadStore")
+
+#endif
+
+#define nop() 		__asm__ __volatile__ ("nop")
+
+#define read_barrier_depends()		do { } while(0)
+#define set_mb(__var, __value) \
+	do { __var = __value; membar_storeload_storestore(); } while(0)
+
+#ifdef CONFIG_SMP
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
+#define smp_read_barrier_depends()	read_barrier_depends()
+#else
+#define smp_mb()	__asm__ __volatile__("":::"memory")
+#define smp_rmb()	__asm__ __volatile__("":::"memory")
+#define smp_wmb()	__asm__ __volatile__("":::"memory")
+#define smp_read_barrier_depends()	do { } while(0)
+#endif
+
+#define flushi(addr)	__asm__ __volatile__ ("flush %0" : : "r" (addr) : "memory")
+
+#define flushw_all()	__asm__ __volatile__("flushw")
+
+/* Performance counter register access. */
+#define read_pcr(__p)  __asm__ __volatile__("rd	%%pcr, %0" : "=r" (__p))
+#define write_pcr(__p) __asm__ __volatile__("wr	%0, 0x0, %%pcr" : : "r" (__p))
+#define read_pic(__p)  __asm__ __volatile__("rd %%pic, %0" : "=r" (__p))
+
+/* Blackbird errata workaround.  See commentary in
+ * arch/sparc64/kernel/smp.c:smp_percpu_timer_interrupt()
+ * for more information.
+ */
+#define reset_pic()    						\
+	__asm__ __volatile__("ba,pt	%xcc, 99f\n\t"		\
+			     ".align	64\n"			\
+			  "99:wr	%g0, 0x0, %pic\n\t"	\
+			     "rd	%pic, %g0")
+
+#ifndef __ASSEMBLY__
+
+extern void sun_do_break(void);
+extern int stop_a_enabled;
+
+extern void fault_in_user_windows(void);
+extern void synchronize_user_stack(void);
+
+extern void __flushw_user(void);
+#define flushw_user() __flushw_user()
+
+#define flush_user_windows flushw_user
+#define flush_register_windows flushw_all
+
+/* Don't hold the runqueue lock over context switch */
+#define __ARCH_WANT_UNLOCKED_CTXSW
+#define prepare_arch_switch(next)		\
+do {						\
+	flushw_all();				\
+} while (0)
+
+	/* See what happens when you design the chip correctly?
+	 *
+	 * We tell gcc we clobber all non-fixed-usage registers except
+	 * for l0/l1.  It will use one for 'next' and the other to hold
+	 * the output value of 'last'.  'next' is not referenced again
+	 * past the invocation of switch_to in the scheduler, so we need
+	 * not preserve it's value.  Hairy, but it lets us remove 2 loads
+	 * and 2 stores in this critical code path.  -DaveM
+	 */
+#define switch_to(prev, next, last)					\
+do {	if (test_thread_flag(TIF_PERFCTR)) {				\
+		unsigned long __tmp;					\
+		read_pcr(__tmp);					\
+		current_thread_info()->pcr_reg = __tmp;			\
+		read_pic(__tmp);					\
+		current_thread_info()->kernel_cntd0 += (unsigned int)(__tmp);\
+		current_thread_info()->kernel_cntd1 += ((__tmp) >> 32);	\
+	}								\
+	flush_tlb_pending();						\
+	save_and_clear_fpu();						\
+	/* If you are tempted to conditionalize the following */	\
+	/* so that ASI is only written if it changes, think again. */	\
+	__asm__ __volatile__("wr %%g0, %0, %%asi"			\
+	: : "r" (__thread_flag_byte_ptr(task_thread_info(next))[TI_FLAG_BYTE_CURRENT_DS]));\
+	trap_block[current_thread_info()->cpu].thread =			\
+		task_thread_info(next);					\
+	__asm__ __volatile__(						\
+	"mov	%%g4, %%g7\n\t"						\
+	"stx	%%i6, [%%sp + 2047 + 0x70]\n\t"				\
+	"stx	%%i7, [%%sp + 2047 + 0x78]\n\t"				\
+	"rdpr	%%wstate, %%o5\n\t"					\
+	"stx	%%o6, [%%g6 + %6]\n\t"					\
+	"stb	%%o5, [%%g6 + %5]\n\t"					\
+	"rdpr	%%cwp, %%o5\n\t"					\
+	"stb	%%o5, [%%g6 + %8]\n\t"					\
+	"mov	%4, %%g6\n\t"						\
+	"ldub	[%4 + %8], %%g1\n\t"					\
+	"wrpr	%%g1, %%cwp\n\t"					\
+	"ldx	[%%g6 + %6], %%o6\n\t"					\
+	"ldub	[%%g6 + %5], %%o5\n\t"					\
+	"ldub	[%%g6 + %7], %%o7\n\t"					\
+	"wrpr	%%o5, 0x0, %%wstate\n\t"				\
+	"ldx	[%%sp + 2047 + 0x70], %%i6\n\t"				\
+	"ldx	[%%sp + 2047 + 0x78], %%i7\n\t"				\
+	"ldx	[%%g6 + %9], %%g4\n\t"					\
+	"brz,pt %%o7, switch_to_pc\n\t"					\
+	" mov	%%g7, %0\n\t"						\
+	"sethi	%%hi(ret_from_syscall), %%g1\n\t"			\
+	"jmpl	%%g1 + %%lo(ret_from_syscall), %%g0\n\t"		\
+	" nop\n\t"							\
+	".globl switch_to_pc\n\t"					\
+	"switch_to_pc:\n\t"						\
+	: "=&r" (last), "=r" (current), "=r" (current_thread_info_reg),	\
+	  "=r" (__local_per_cpu_offset)					\
+	: "0" (task_thread_info(next)),					\
+	  "i" (TI_WSTATE), "i" (TI_KSP), "i" (TI_NEW_CHILD),            \
+	  "i" (TI_CWP), "i" (TI_TASK)					\
+	: "cc",								\
+	        "g1", "g2", "g3",                   "g7",		\
+	        "l1", "l2", "l3", "l4", "l5", "l6", "l7",		\
+	  "i0", "i1", "i2", "i3", "i4", "i5",				\
+	  "o0", "o1", "o2", "o3", "o4", "o5",       "o7");		\
+	/* If you fuck with this, update ret_from_syscall code too. */	\
+	if (test_thread_flag(TIF_PERFCTR)) {				\
+		write_pcr(current_thread_info()->pcr_reg);		\
+		reset_pic();						\
+	}								\
+} while(0)
+
+static inline unsigned long xchg32(__volatile__ unsigned int *m, unsigned int val)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__(
+"	membar		#StoreLoad | #LoadLoad\n"
+"	mov		%0, %1\n"
+"1:	lduw		[%4], %2\n"
+"	cas		[%4], %2, %0\n"
+"	cmp		%2, %0\n"
+"	bne,a,pn	%%icc, 1b\n"
+"	 mov		%1, %0\n"
+"	membar		#StoreLoad | #StoreStore\n"
+	: "=&r" (val), "=&r" (tmp1), "=&r" (tmp2)
+	: "0" (val), "r" (m)
+	: "cc", "memory");
+	return val;
+}
+
+static inline unsigned long xchg64(__volatile__ unsigned long *m, unsigned long val)
+{
+	unsigned long tmp1, tmp2;
+
+	__asm__ __volatile__(
+"	membar		#StoreLoad | #LoadLoad\n"
+"	mov		%0, %1\n"
+"1:	ldx		[%4], %2\n"
+"	casx		[%4], %2, %0\n"
+"	cmp		%2, %0\n"
+"	bne,a,pn	%%xcc, 1b\n"
+"	 mov		%1, %0\n"
+"	membar		#StoreLoad | #StoreStore\n"
+	: "=&r" (val), "=&r" (tmp1), "=&r" (tmp2)
+	: "0" (val), "r" (m)
+	: "cc", "memory");
+	return val;
+}
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+extern void __xchg_called_with_bad_pointer(void);
+
+static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr,
+				       int size)
+{
+	switch (size) {
+	case 4:
+		return xchg32(ptr, x);
+	case 8:
+		return xchg64(ptr, x);
+	};
+	__xchg_called_with_bad_pointer();
+	return x;
+}
+
+extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noreturn));
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+
+#define __HAVE_ARCH_CMPXCHG 1
+
+static inline unsigned long
+__cmpxchg_u32(volatile int *m, int old, int new)
+{
+	__asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
+			     "cas [%2], %3, %0\n\t"
+			     "membar #StoreLoad | #StoreStore"
+			     : "=&r" (new)
+			     : "0" (new), "r" (m), "r" (old)
+			     : "memory");
+
+	return new;
+}
+
+static inline unsigned long
+__cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
+{
+	__asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
+			     "casx [%2], %3, %0\n\t"
+			     "membar #StoreLoad | #StoreStore"
+			     : "=&r" (new)
+			     : "0" (new), "r" (m), "r" (old)
+			     : "memory");
+
+	return new;
+}
+
+/* This function doesn't exist, so you'll get a linker error
+   if something tries to do an invalid cmpxchg().  */
+extern void __cmpxchg_called_with_bad_pointer(void);
+
+static inline unsigned long
+__cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size)
+{
+	switch (size) {
+		case 4:
+			return __cmpxchg_u32(ptr, old, new);
+		case 8:
+			return __cmpxchg_u64(ptr, old, new);
+	}
+	__cmpxchg_called_with_bad_pointer();
+	return old;
+}
+
+#define cmpxchg(ptr,o,n)						 \
+  ({									 \
+     __typeof__(*(ptr)) _o_ = (o);					 \
+     __typeof__(*(ptr)) _n_ = (n);					 \
+     (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_,		 \
+				    (unsigned long)_n_, sizeof(*(ptr))); \
+  })
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+				      unsigned long old,
+				      unsigned long new, int size)
+{
+	switch (size) {
+	case 4:
+	case 8:	return __cmpxchg(ptr, old, new, size);
+	default:
+		return __cmpxchg_local_generic(ptr, old, new, size);
+	}
+
+	return old;
+}
+
+#define cmpxchg_local(ptr, o, n)				  	\
+	((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o),	\
+			(unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n)					\
+  ({									\
+	BUILD_BUG_ON(sizeof(*(ptr)) != 8);				\
+	cmpxchg_local((ptr), (o), (n));					\
+  })
+
+#endif /* !(__ASSEMBLY__) */
+
+#define arch_align_stack(x) (x)
+
+#endif /* !(__SPARC64_SYSTEM_H) */
diff --git a/arch/sparc/include/asm/termbits.h b/arch/sparc/include/asm/termbits.h
new file mode 100644
index 000000000000..d6ca3e2754f5
--- /dev/null
+++ b/arch/sparc/include/asm/termbits.h
@@ -0,0 +1,266 @@
+#ifndef _SPARC_TERMBITS_H
+#define _SPARC_TERMBITS_H
+
+#include <linux/posix_types.h>
+
+typedef unsigned char   cc_t;
+typedef unsigned int    speed_t;
+
+#if defined(__sparc__) && defined(__arch64__)
+typedef unsigned int    tcflag_t;
+#else
+typedef unsigned long   tcflag_t;
+#endif
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+#define NCCS 17
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+#ifdef __KERNEL__
+#define SIZEOF_USER_TERMIOS sizeof (struct termios) - (2*sizeof (cc_t))
+	cc_t _x_cc[2];                  /* We need them to hold vmin/vtime */
+#endif
+};
+
+struct termios2 {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t _x_cc[2];                  /* padding to match ktermios */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+struct ktermios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+	cc_t _x_cc[2];                  /* We need them to hold vmin/vtime */
+	speed_t c_ispeed;		/* input speed */
+	speed_t c_ospeed;		/* output speed */
+};
+
+/* c_cc characters */
+#define VINTR    0
+#define VQUIT    1
+#define VERASE   2
+#define VKILL    3
+#define VEOF     4
+#define VEOL     5
+#define VEOL2    6
+#define VSWTC    7
+#define VSTART   8
+#define VSTOP    9
+
+
+
+#define VSUSP    10
+#define VDSUSP   11  /* SunOS POSIX nicety I do believe... */
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE  14
+#define VLNEXT   15
+
+/* Kernel keeps vmin/vtime separated, user apps assume vmin/vtime is
+ * shared with eof/eol
+ */
+#ifdef __KERNEL__
+#define VMIN     16
+#define VTIME    17
+#else
+#define VMIN     VEOF
+#define VTIME    VEOL
+#endif
+
+/* c_iflag bits */
+#define IGNBRK	0x00000001
+#define BRKINT	0x00000002
+#define IGNPAR	0x00000004
+#define PARMRK	0x00000008
+#define INPCK	0x00000010
+#define ISTRIP	0x00000020
+#define INLCR	0x00000040
+#define IGNCR	0x00000080
+#define ICRNL	0x00000100
+#define IUCLC	0x00000200
+#define IXON	0x00000400
+#define IXANY	0x00000800
+#define IXOFF	0x00001000
+#define IMAXBEL	0x00002000
+#define IUTF8   0x00004000
+
+/* c_oflag bits */
+#define OPOST	0x00000001
+#define OLCUC	0x00000002
+#define ONLCR	0x00000004
+#define OCRNL	0x00000008
+#define ONOCR	0x00000010
+#define ONLRET	0x00000020
+#define OFILL	0x00000040
+#define OFDEL	0x00000080
+#define NLDLY	0x00000100
+#define   NL0	0x00000000
+#define   NL1	0x00000100
+#define CRDLY	0x00000600
+#define   CR0	0x00000000
+#define   CR1	0x00000200
+#define   CR2	0x00000400
+#define   CR3	0x00000600
+#define TABDLY	0x00001800
+#define   TAB0	0x00000000
+#define   TAB1	0x00000800
+#define   TAB2	0x00001000
+#define   TAB3	0x00001800
+#define   XTABS	0x00001800
+#define BSDLY	0x00002000
+#define   BS0	0x00000000
+#define   BS1	0x00002000
+#define VTDLY	0x00004000
+#define   VT0	0x00000000
+#define   VT1	0x00004000
+#define FFDLY	0x00008000
+#define   FF0	0x00000000
+#define   FF1	0x00008000
+#define PAGEOUT 0x00010000  /* SUNOS specific */
+#define WRAP    0x00020000  /* SUNOS specific */
+
+/* c_cflag bit meaning */
+#define CBAUD	  0x0000100f
+#define  B0	  0x00000000   /* hang up */
+#define  B50	  0x00000001
+#define  B75	  0x00000002
+#define  B110	  0x00000003
+#define  B134	  0x00000004
+#define  B150	  0x00000005
+#define  B200	  0x00000006
+#define  B300	  0x00000007
+#define  B600	  0x00000008
+#define  B1200	  0x00000009
+#define  B1800	  0x0000000a
+#define  B2400	  0x0000000b
+#define  B4800	  0x0000000c
+#define  B9600	  0x0000000d
+#define  B19200	  0x0000000e
+#define  B38400	  0x0000000f
+#define EXTA      B19200
+#define EXTB      B38400
+#define  CSIZE    0x00000030
+#define   CS5	  0x00000000
+#define   CS6	  0x00000010
+#define   CS7	  0x00000020
+#define   CS8	  0x00000030
+#define CSTOPB	  0x00000040
+#define CREAD	  0x00000080
+#define PARENB	  0x00000100
+#define PARODD	  0x00000200
+#define HUPCL	  0x00000400
+#define CLOCAL	  0x00000800
+#define CBAUDEX   0x00001000
+/* We'll never see these speeds with the Zilogs, but for completeness... */
+#define  BOTHER   0x00001000
+#define  B57600   0x00001001
+#define  B115200  0x00001002
+#define  B230400  0x00001003
+#define  B460800  0x00001004
+/* This is what we can do with the Zilogs. */
+#define  B76800   0x00001005
+/* This is what we can do with the SAB82532. */
+#define  B153600  0x00001006
+#define  B307200  0x00001007
+#define  B614400  0x00001008
+#define  B921600  0x00001009
+/* And these are the rest... */
+#define  B500000  0x0000100a
+#define  B576000  0x0000100b
+#define B1000000  0x0000100c
+#define B1152000  0x0000100d
+#define B1500000  0x0000100e
+#define B2000000  0x0000100f
+/* These have totally bogus values and nobody uses them
+   so far. Later on we'd have to use say 0x10000x and
+   adjust CBAUD constant and drivers accordingly.
+#define B2500000  0x00001010
+#define B3000000  0x00001011
+#define B3500000  0x00001012
+#define B4000000  0x00001013  */
+#define CIBAUD	  0x100f0000  /* input baud rate (not used) */
+#define CMSPAR	  0x40000000  /* mark or space (stick) parity */
+#define CRTSCTS	  0x80000000  /* flow control */
+
+#define IBSHIFT	  16		/* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG	0x00000001
+#define ICANON	0x00000002
+#define XCASE	0x00000004
+#define ECHO	0x00000008
+#define ECHOE	0x00000010
+#define ECHOK	0x00000020
+#define ECHONL	0x00000040
+#define NOFLSH	0x00000080
+#define TOSTOP	0x00000100
+#define ECHOCTL	0x00000200
+#define ECHOPRT	0x00000400
+#define ECHOKE	0x00000800
+#define DEFECHO 0x00001000  /* SUNOS thing, what is it? */
+#define FLUSHO	0x00002000
+#define PENDIN	0x00004000
+#define IEXTEN	0x00008000
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* !(_SPARC_TERMBITS_H) */
diff --git a/arch/sparc/include/asm/termios.h b/arch/sparc/include/asm/termios.h
new file mode 100644
index 000000000000..e8ba95399643
--- /dev/null
+++ b/arch/sparc/include/asm/termios.h
@@ -0,0 +1,186 @@
+#ifndef _SPARC_TERMIOS_H
+#define _SPARC_TERMIOS_H
+
+#include <asm/ioctls.h>
+#include <asm/termbits.h>
+
+#if defined(__KERNEL__) || defined(__DEFINE_BSD_TERMIOS)
+struct sgttyb {
+	char	sg_ispeed;
+	char	sg_ospeed;
+	char	sg_erase;
+	char	sg_kill;
+	short	sg_flags;
+};
+
+struct tchars {
+	char	t_intrc;
+	char	t_quitc;
+	char	t_startc;
+	char	t_stopc;
+	char	t_eofc;
+	char	t_brkc;
+};
+
+struct ltchars {
+	char	t_suspc;
+	char	t_dsuspc;
+	char	t_rprntc;
+	char	t_flushc;
+	char	t_werasc;
+	char	t_lnextc;
+};
+#endif /* __KERNEL__ */
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#ifdef __KERNEL__
+#include <linux/module.h>
+
+/*
+ * c_cc characters in the termio structure.  Oh, how I love being
+ * backwardly compatible.  Notice that character 4 and 5 are
+ * interpreted differently depending on whether ICANON is set in
+ * c_lflag.  If it's set, they are used as _VEOF and _VEOL, otherwise
+ * as _VMIN and V_TIME.  This is for compatibility with OSF/1 (which
+ * is compatible with sysV)...
+ */
+#define _VMIN	4
+#define _VTIME	5
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		eol=\0		eol2=\0		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		dsusp=^Y
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	vmin=\1         vtime=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\000\000\000\021\023\032\031\022\025\027\026\001"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	unsigned short tmp; \
+	int err; \
+	err = get_user(tmp, &(termio)->c_iflag); \
+	(termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+	err |= get_user(tmp, &(termio)->c_oflag); \
+	(termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+	err |= get_user(tmp, &(termio)->c_cflag); \
+	(termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+	err |= get_user(tmp, &(termio)->c_lflag); \
+	(termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+	err |= copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+	err; \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ *
+ * Note the "fun" _VMIN overloading.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	int err; \
+	err  = put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	err |= put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	err |= put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	err |= put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	err |= put_user((termios)->c_line,  &(termio)->c_line); \
+	err |= copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+	if (!((termios)->c_lflag & ICANON)) { \
+		err |= put_user((termios)->c_cc[VMIN], &(termio)->c_cc[_VMIN]); \
+		err |= put_user((termios)->c_cc[VTIME], &(termio)->c_cc[_VTIME]); \
+	} \
+	err; \
+})
+
+#define user_termios_to_kernel_termios(k, u) \
+({ \
+	int err; \
+	err  = get_user((k)->c_iflag, &(u)->c_iflag); \
+	err |= get_user((k)->c_oflag, &(u)->c_oflag); \
+	err |= get_user((k)->c_cflag, &(u)->c_cflag); \
+	err |= get_user((k)->c_lflag, &(u)->c_lflag); \
+	err |= get_user((k)->c_line,  &(u)->c_line); \
+	err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \
+	if ((k)->c_lflag & ICANON) { \
+		err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+		err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+	} else { \
+		err |= get_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+		err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+	} \
+	err |= get_user((k)->c_ispeed,  &(u)->c_ispeed); \
+	err |= get_user((k)->c_ospeed,  &(u)->c_ospeed); \
+	err; \
+})
+
+#define kernel_termios_to_user_termios(u, k) \
+({ \
+	int err; \
+	err  = put_user((k)->c_iflag, &(u)->c_iflag); \
+	err |= put_user((k)->c_oflag, &(u)->c_oflag); \
+	err |= put_user((k)->c_cflag, &(u)->c_cflag); \
+	err |= put_user((k)->c_lflag, &(u)->c_lflag); \
+	err |= put_user((k)->c_line, &(u)->c_line); \
+	err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \
+	if (!((k)->c_lflag & ICANON)) { \
+		err |= put_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+		err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+	} else { \
+		err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+		err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+	} \
+	err |= put_user((k)->c_ispeed, &(u)->c_ispeed); \
+	err |= put_user((k)->c_ospeed, &(u)->c_ospeed); \
+	err; \
+})
+
+#define user_termios_to_kernel_termios_1(k, u) \
+({ \
+	int err; \
+	err  = get_user((k)->c_iflag, &(u)->c_iflag); \
+	err |= get_user((k)->c_oflag, &(u)->c_oflag); \
+	err |= get_user((k)->c_cflag, &(u)->c_cflag); \
+	err |= get_user((k)->c_lflag, &(u)->c_lflag); \
+	err |= get_user((k)->c_line,  &(u)->c_line); \
+	err |= copy_from_user((k)->c_cc, (u)->c_cc, NCCS); \
+	if ((k)->c_lflag & ICANON) { \
+		err |= get_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+		err |= get_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+	} else { \
+		err |= get_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+		err |= get_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+	} \
+	err; \
+})
+
+#define kernel_termios_to_user_termios_1(u, k) \
+({ \
+	int err; \
+	err  = put_user((k)->c_iflag, &(u)->c_iflag); \
+	err |= put_user((k)->c_oflag, &(u)->c_oflag); \
+	err |= put_user((k)->c_cflag, &(u)->c_cflag); \
+	err |= put_user((k)->c_lflag, &(u)->c_lflag); \
+	err |= put_user((k)->c_line, &(u)->c_line); \
+	err |= copy_to_user((u)->c_cc, (k)->c_cc, NCCS); \
+	if (!((k)->c_lflag & ICANON)) { \
+		err |= put_user((k)->c_cc[VMIN],  &(u)->c_cc[_VMIN]); \
+		err |= put_user((k)->c_cc[VTIME], &(u)->c_cc[_VTIME]); \
+	} else { \
+		err |= put_user((k)->c_cc[VEOF], &(u)->c_cc[VEOF]); \
+		err |= put_user((k)->c_cc[VEOL], &(u)->c_cc[VEOL]); \
+	} \
+	err; \
+})
+
+#endif	/* __KERNEL__ */
+
+#endif /* _SPARC_TERMIOS_H */
diff --git a/arch/sparc/include/asm/thread_info.h b/arch/sparc/include/asm/thread_info.h
new file mode 100644
index 000000000000..122d7acc07e6
--- /dev/null
+++ b/arch/sparc/include/asm/thread_info.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_THREAD_INFO_H
+#define ___ASM_SPARC_THREAD_INFO_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/thread_info_64.h>
+#else
+#include <asm/thread_info_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h
new file mode 100644
index 000000000000..cbb892d0dff0
--- /dev/null
+++ b/arch/sparc/include/asm/thread_info_32.h
@@ -0,0 +1,158 @@
+/*
+ * thread_info.h: sparc low-level thread information
+ * adapted from the ppc version by Pete Zaitcev, which was
+ * adapted from the i386 version by Paul Mackerras
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * Copyright (c) 2002  Pete Zaitcev (zaitcev@yahoo.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+#include <asm/btfixup.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Low level task data.
+ *
+ * If you change this, change the TI_* offsets below to match.
+ */
+#define NSWINS 8
+struct thread_info {
+	unsigned long		uwinmask;
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	int			cpu;		/* cpu we're on */
+	int			preempt_count;	/* 0 => preemptable,
+						   <0 => BUG */
+	int			softirq_count;
+	int			hardirq_count;
+
+	/* Context switch saved kernel state. */
+	unsigned long ksp;	/* ... ksp __attribute__ ((aligned (8))); */
+	unsigned long kpc;
+	unsigned long kpsr;
+	unsigned long kwim;
+
+	/* A place to store user windows and stack pointers
+	 * when the stack needs inspection.
+	 */
+	struct reg_window	reg_window[NSWINS];	/* align for ldd! */
+	unsigned long		rwbuf_stkptrs[NSWINS];
+	unsigned long		w_saved;
+
+	struct restart_block	restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk)				\
+{							\
+	.uwinmask	=	0,			\
+	.task		=	&tsk,			\
+	.exec_domain	=	&default_exec_domain,	\
+	.flags		=	0,			\
+	.cpu		=	0,			\
+	.preempt_count	=	1,			\
+	.restart_block	= {				\
+		.fn	=	do_no_restart_syscall,	\
+	},						\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+register struct thread_info *current_thread_info_reg asm("g6");
+#define current_thread_info()   (current_thread_info_reg)
+
+/*
+ * thread information allocation
+ */
+#if PAGE_SHIFT == 13
+#define THREAD_INFO_ORDER  0
+#else /* PAGE_SHIFT */
+#define THREAD_INFO_ORDER  1
+#endif
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+BTFIXUPDEF_CALL(struct thread_info *, alloc_thread_info, void)
+#define alloc_thread_info(tsk) BTFIXUP_CALL(alloc_thread_info)()
+
+BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *)
+#define free_thread_info(ti) BTFIXUP_CALL(free_thread_info)(ti)
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Size of kernel stack for each process.
+ * Observe the order of get_free_pages() in alloc_thread_info().
+ * The sun4 has 8K stack too, because it's short on memory, and 16K is a waste.
+ */
+#define THREAD_SIZE		8192
+
+/*
+ * Offsets in thread_info structure, used in assembly code
+ * The "#define REGWIN_SZ 0x40" was abolished, so no multiplications.
+ */
+#define TI_UWINMASK	0x00	/* uwinmask */
+#define TI_TASK		0x04
+#define TI_EXECDOMAIN	0x08	/* exec_domain */
+#define TI_FLAGS	0x0c
+#define TI_CPU		0x10
+#define TI_PREEMPT	0x14	/* preempt_count */
+#define TI_SOFTIRQ	0x18	/* softirq_count */
+#define TI_HARDIRQ	0x1c	/* hardirq_count */
+#define TI_KSP		0x20	/* ksp */
+#define TI_KPC		0x24	/* kpc (ldd'ed with kpc) */
+#define TI_KPSR		0x28	/* kpsr */
+#define TI_KWIM		0x2c	/* kwim (ldd'ed with kpsr) */
+#define TI_REG_WINDOW	0x30
+#define TI_RWIN_SPTRS	0x230
+#define TI_W_SAVED	0x250
+/* #define TI_RESTART_BLOCK 0x25n */ /* Nobody cares */
+
+#define PREEMPT_ACTIVE		0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_RESTORE_SIGMASK	4	/* restore signal mask in do_signal() */
+#define TIF_USEDFPU		8	/* FPU was used by this task
+					 * this quantum (SMP) */
+#define TIF_POLLING_NRFLAG	9	/* true if poll_idle() is polling
+					 * TIF_NEED_RESCHED */
+#define TIF_MEMDIE		10
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
+#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_DO_NOTIFY_RESUME_MASK	(_TIF_NOTIFY_RESUME | \
+					 _TIF_SIGPENDING | \
+					 _TIF_RESTORE_SIGMASK)
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h
new file mode 100644
index 000000000000..c0a737d7292c
--- /dev/null
+++ b/arch/sparc/include/asm/thread_info_64.h
@@ -0,0 +1,281 @@
+/* thread_info.h: sparc64 low-level thread information
+ *
+ * Copyright (C) 2002  David S. Miller (davem@redhat.com)
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+#define NSWINS		7
+
+#define TI_FLAG_BYTE_FAULT_CODE		0
+#define TI_FLAG_FAULT_CODE_SHIFT	56
+#define TI_FLAG_BYTE_WSTATE		1
+#define TI_FLAG_WSTATE_SHIFT		48
+#define TI_FLAG_BYTE_CWP		2
+#define TI_FLAG_CWP_SHIFT		40
+#define TI_FLAG_BYTE_CURRENT_DS		3
+#define TI_FLAG_CURRENT_DS_SHIFT	32
+#define TI_FLAG_BYTE_FPDEPTH		4
+#define TI_FLAG_FPDEPTH_SHIFT		24
+#define TI_FLAG_BYTE_WSAVED		5
+#define TI_FLAG_WSAVED_SHIFT		16
+
+#include <asm/page.h>
+
+#ifndef __ASSEMBLY__
+
+#include <asm/ptrace.h>
+#include <asm/types.h>
+
+struct task_struct;
+struct exec_domain;
+
+struct thread_info {
+	/* D$ line 1 */
+	struct task_struct	*task;
+	unsigned long		flags;
+	__u8			fpsaved[7];
+	__u8			status;
+	unsigned long		ksp;
+
+	/* D$ line 2 */
+	unsigned long		fault_address;
+	struct pt_regs		*kregs;
+	struct exec_domain	*exec_domain;
+	int			preempt_count;	/* 0 => preemptable, <0 => BUG */
+	__u8			new_child;
+	__u8			syscall_noerror;
+	__u16			cpu;
+
+	unsigned long		*utraps;
+
+	struct reg_window 	reg_window[NSWINS];
+	unsigned long 		rwbuf_stkptrs[NSWINS];
+
+	unsigned long		gsr[7];
+	unsigned long		xfsr[7];
+
+	__u64			__user *user_cntd0;
+	__u64			__user *user_cntd1;
+	__u64			kernel_cntd0, kernel_cntd1;
+	__u64			pcr_reg;
+
+	struct restart_block	restart_block;
+
+	struct pt_regs		*kern_una_regs;
+	unsigned int		kern_una_insn;
+
+	unsigned long		fpregs[0] __attribute__ ((aligned(64)));
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+/* offsets into the thread_info struct for assembly code access */
+#define TI_TASK		0x00000000
+#define TI_FLAGS	0x00000008
+#define TI_FAULT_CODE	(TI_FLAGS + TI_FLAG_BYTE_FAULT_CODE)
+#define TI_WSTATE	(TI_FLAGS + TI_FLAG_BYTE_WSTATE)
+#define TI_CWP		(TI_FLAGS + TI_FLAG_BYTE_CWP)
+#define TI_CURRENT_DS	(TI_FLAGS + TI_FLAG_BYTE_CURRENT_DS)
+#define TI_FPDEPTH	(TI_FLAGS + TI_FLAG_BYTE_FPDEPTH)
+#define TI_WSAVED	(TI_FLAGS + TI_FLAG_BYTE_WSAVED)
+#define TI_FPSAVED	0x00000010
+#define TI_KSP		0x00000018
+#define TI_FAULT_ADDR	0x00000020
+#define TI_KREGS	0x00000028
+#define TI_EXEC_DOMAIN	0x00000030
+#define TI_PRE_COUNT	0x00000038
+#define TI_NEW_CHILD	0x0000003c
+#define TI_SYS_NOERROR	0x0000003d
+#define TI_CPU		0x0000003e
+#define TI_UTRAPS	0x00000040
+#define TI_REG_WINDOW	0x00000048
+#define TI_RWIN_SPTRS	0x000003c8
+#define TI_GSR		0x00000400
+#define TI_XFSR		0x00000438
+#define TI_USER_CNTD0	0x00000470
+#define TI_USER_CNTD1	0x00000478
+#define TI_KERN_CNTD0	0x00000480
+#define TI_KERN_CNTD1	0x00000488
+#define TI_PCR		0x00000490
+#define TI_RESTART_BLOCK 0x00000498
+#define TI_KUNA_REGS	0x000004c0
+#define TI_KUNA_INSN	0x000004c8
+#define TI_FPREGS	0x00000500
+
+/* We embed this in the uppermost byte of thread_info->flags */
+#define FAULT_CODE_WRITE	0x01	/* Write access, implies D-TLB	   */
+#define FAULT_CODE_DTLB		0x02	/* Miss happened in D-TLB	   */
+#define FAULT_CODE_ITLB		0x04	/* Miss happened in I-TLB	   */
+#define FAULT_CODE_WINFIXUP	0x08	/* Miss happened during spill/fill */
+#define FAULT_CODE_BLKCOMMIT	0x10	/* Use blk-commit ASI in copy_page */
+
+#if PAGE_SHIFT == 13
+#define THREAD_SIZE (2*PAGE_SIZE)
+#define THREAD_SHIFT (PAGE_SHIFT + 1)
+#else /* PAGE_SHIFT == 13 */
+#define THREAD_SIZE PAGE_SIZE
+#define THREAD_SHIFT PAGE_SHIFT
+#endif /* PAGE_SHIFT == 13 */
+
+#define PREEMPT_ACTIVE		0x4000000
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#ifndef __ASSEMBLY__
+
+#define INIT_THREAD_INFO(tsk)				\
+{							\
+	.task		=	&tsk,			\
+	.flags		= ((unsigned long)ASI_P) << TI_FLAG_CURRENT_DS_SHIFT,	\
+	.exec_domain	=	&default_exec_domain,	\
+	.preempt_count	=	1,			\
+	.restart_block	= {				\
+		.fn	=	do_no_restart_syscall,	\
+	},						\
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+register struct thread_info *current_thread_info_reg asm("g6");
+#define current_thread_info()	(current_thread_info_reg)
+
+/* thread information allocation */
+#if PAGE_SHIFT == 13
+#define __THREAD_INFO_ORDER	1
+#else /* PAGE_SHIFT == 13 */
+#define __THREAD_INFO_ORDER	0
+#endif /* PAGE_SHIFT == 13 */
+
+#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
+
+#ifdef CONFIG_DEBUG_STACK_USAGE
+#define alloc_thread_info(tsk)					\
+({								\
+	struct thread_info *ret;				\
+								\
+	ret = (struct thread_info *)				\
+	  __get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER);	\
+	if (ret)						\
+		memset(ret, 0, PAGE_SIZE<<__THREAD_INFO_ORDER);	\
+	ret;							\
+})
+#else
+#define alloc_thread_info(tsk) \
+	((struct thread_info *)__get_free_pages(GFP_KERNEL, __THREAD_INFO_ORDER))
+#endif
+
+#define free_thread_info(ti) \
+	free_pages((unsigned long)(ti),__THREAD_INFO_ORDER)
+
+#define __thread_flag_byte_ptr(ti)	\
+	((unsigned char *)(&((ti)->flags)))
+#define __cur_thread_flag_byte_ptr	__thread_flag_byte_ptr(current_thread_info())
+
+#define get_thread_fault_code()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE])
+#define set_thread_fault_code(val)	(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FAULT_CODE] = (val))
+#define get_thread_wstate()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE])
+#define set_thread_wstate(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSTATE] = (val))
+#define get_thread_cwp()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP])
+#define set_thread_cwp(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CWP] = (val))
+#define get_thread_current_ds()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS])
+#define set_thread_current_ds(val)	(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_CURRENT_DS] = (val))
+#define get_thread_fpdepth()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH])
+#define set_thread_fpdepth(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_FPDEPTH] = (val))
+#define get_thread_wsaved()		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED])
+#define set_thread_wsaved(val)		(__cur_thread_flag_byte_ptr[TI_FLAG_BYTE_WSAVED] = (val))
+
+#endif /* !(__ASSEMBLY__) */
+
+/*
+ * Thread information flags, only 16 bits are available as we encode
+ * other values into the upper 6 bytes.
+ *
+ * On trap return we need to test several values:
+ *
+ * user:	need_resched, notify_resume, sigpending, wsaved, perfctr
+ * kernel:	fpdepth
+ *
+ * So to check for work in the kernel case we simply load the fpdepth
+ * byte out of the flags and test it.  For the user case we encode the
+ * lower 3 bytes of flags as follows:
+ *	----------------------------------------
+ *	| wsaved | flags byte 1 | flags byte 2 |
+ *	----------------------------------------
+ * This optimizes the user test into:
+ *	ldx		[%g6 + TI_FLAGS], REG1
+ *	sethi		%hi(_TIF_USER_WORK_MASK), REG2
+ *	or		REG2, %lo(_TIF_USER_WORK_MASK), REG2
+ *	andcc		REG1, REG2, %g0
+ *	be,pt		no_work_to_do
+ *	 nop
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_PERFCTR		4	/* performance counters active */
+#define TIF_UNALIGNED		5	/* allowed to do unaligned accesses */
+/* flag bit 6 is available */
+#define TIF_32BIT		7	/* 32-bit binary */
+/* flag bit 8 is available */
+#define TIF_SECCOMP		9	/* secure computing */
+#define TIF_SYSCALL_AUDIT	10	/* syscall auditing active */
+/* flag bit 11 is available */
+/* NOTE: Thread flags >= 12 should be ones we have no interest
+ *       in using in assembly, else we can't use the mask as
+ *       an immediate value in instructions such as andcc.
+ */
+#define TIF_ABI_PENDING		12
+#define TIF_MEMDIE		13
+#define TIF_POLLING_NRFLAG	14
+
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_PERFCTR		(1<<TIF_PERFCTR)
+#define _TIF_UNALIGNED		(1<<TIF_UNALIGNED)
+#define _TIF_32BIT		(1<<TIF_32BIT)
+#define _TIF_SECCOMP		(1<<TIF_SECCOMP)
+#define _TIF_SYSCALL_AUDIT	(1<<TIF_SYSCALL_AUDIT)
+#define _TIF_ABI_PENDING	(1<<TIF_ABI_PENDING)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+#define _TIF_USER_WORK_MASK	((0xff << TI_FLAG_WSAVED_SHIFT) | \
+				 _TIF_DO_NOTIFY_RESUME_MASK | \
+				 _TIF_NEED_RESCHED | _TIF_PERFCTR)
+#define _TIF_DO_NOTIFY_RESUME_MASK	(_TIF_NOTIFY_RESUME | _TIF_SIGPENDING)
+
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ *
+ * Note that there are only 8 bits available.
+ */
+#define TS_RESTORE_SIGMASK	0x0001	/* restore signal mask in do_signal() */
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK	1
+static inline void set_restore_sigmask(void)
+{
+	struct thread_info *ti = current_thread_info();
+	ti->status |= TS_RESTORE_SIGMASK;
+	set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif	/* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/sparc/include/asm/timer.h b/arch/sparc/include/asm/timer.h
new file mode 100644
index 000000000000..612fd2779d9e
--- /dev/null
+++ b/arch/sparc/include/asm/timer.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TIMER_H
+#define ___ASM_SPARC_TIMER_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/timer_64.h>
+#else
+#include <asm/timer_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/timer_32.h b/arch/sparc/include/asm/timer_32.h
new file mode 100644
index 000000000000..361e53898dd7
--- /dev/null
+++ b/arch/sparc/include/asm/timer_32.h
@@ -0,0 +1,107 @@
+/*
+ * timer.h:  Definitions for the timer chips on the Sparc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+
+#ifndef _SPARC_TIMER_H
+#define _SPARC_TIMER_H
+
+#include <asm/system.h>  /* For SUN4M_NCPUS */
+#include <asm/sun4paddr.h>
+#include <asm/btfixup.h>
+
+/* Timer structures. The interrupt timer has two properties which
+ * are the counter (which is handled in do_timer in sched.c) and the limit.
+ * This limit is where the timer's counter 'wraps' around. Oddly enough,
+ * the sun4c timer when it hits the limit wraps back to 1 and not zero
+ * thus when calculating the value at which it will fire a microsecond you
+ * must adjust by one.  Thanks SUN for designing such great hardware ;(
+ */
+
+/* Note that I am only going to use the timer that interrupts at
+ * Sparc IRQ 10.  There is another one available that can fire at
+ * IRQ 14. Currently it is left untouched, we keep the PROM's limit
+ * register value and let the prom take these interrupts.  This allows
+ * L1-A to work.
+ */
+
+struct sun4c_timer_info {
+  __volatile__ unsigned int cur_count10;
+  __volatile__ unsigned int timer_limit10;
+  __volatile__ unsigned int cur_count14;
+  __volatile__ unsigned int timer_limit14;
+};
+
+#define SUN4C_TIMER_PHYSADDR   0xf3000000
+#ifdef CONFIG_SUN4
+#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR
+#else
+#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR
+#endif
+
+/* A sun4m has two blocks of registers which are probably of the same
+ * structure. LSI Logic's L64851 is told to _decrement_ from the limit
+ * value. Aurora behaves similarly but its limit value is compacted in
+ * other fashion (it's wider). Documented fields are defined here.
+ */
+
+/* As with the interrupt register, we have two classes of timer registers
+ * which are per-cpu and master.  Per-cpu timers only hit that cpu and are
+ * only level 14 ticks, master timer hits all cpus and is level 10.
+ */
+
+#define SUN4M_PRM_CNT_L       0x80000000
+#define SUN4M_PRM_CNT_LVALUE  0x7FFFFC00
+
+struct sun4m_timer_percpu_info {
+  __volatile__ unsigned int l14_timer_limit;    /* Initial value is 0x009c4000 */
+  __volatile__ unsigned int l14_cur_count;
+
+  /* This register appears to be write only and/or inaccessible
+   * on Uni-Processor sun4m machines.
+   */
+  __volatile__ unsigned int l14_limit_noclear;  /* Data access error is here */
+
+  __volatile__ unsigned int cntrl;            /* =1 after POST on Aurora */
+  __volatile__ unsigned char space[PAGE_SIZE - 16];
+};
+
+struct sun4m_timer_regs {
+	struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS];
+	volatile unsigned int l10_timer_limit;
+	volatile unsigned int l10_cur_count;
+
+	/* Again, this appears to be write only and/or inaccessible
+	 * on uni-processor sun4m machines.
+	 */
+	volatile unsigned int l10_limit_noclear;
+
+	/* This register too, it must be magic. */
+	volatile unsigned int foobar;
+
+	volatile unsigned int cfg;     /* equals zero at boot time... */
+};
+
+#define SUN4D_PRM_CNT_L       0x80000000
+#define SUN4D_PRM_CNT_LVALUE  0x7FFFFC00
+
+struct sun4d_timer_regs {
+	volatile unsigned int l10_timer_limit;
+	volatile unsigned int l10_cur_countx;
+	volatile unsigned int l10_limit_noclear;
+	volatile unsigned int ctrl;
+	volatile unsigned int l10_cur_count;
+};
+
+extern struct sun4d_timer_regs *sun4d_timers;
+
+extern __volatile__ unsigned int *master_l10_counter;
+extern __volatile__ unsigned int *master_l10_limit;
+
+/* FIXME: Make do_[gs]ettimeofday btfixup calls */
+BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv)
+#define bus_do_settimeofday(tv) BTFIXUP_CALL(bus_do_settimeofday)(tv)
+
+#endif /* !(_SPARC_TIMER_H) */
diff --git a/arch/sparc/include/asm/timer_64.h b/arch/sparc/include/asm/timer_64.h
new file mode 100644
index 000000000000..5b779fd1f788
--- /dev/null
+++ b/arch/sparc/include/asm/timer_64.h
@@ -0,0 +1,30 @@
+/* timer.h: System timer definitions for sun5.
+ *
+ * Copyright (C) 1997, 2008 David S. Miller (davem@davemloft.net)
+ */
+
+#ifndef _SPARC64_TIMER_H
+#define _SPARC64_TIMER_H
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+struct sparc64_tick_ops {
+	unsigned long (*get_tick)(void);
+	int (*add_compare)(unsigned long);
+	unsigned long softint_mask;
+	void (*disable_irq)(void);
+
+	void (*init_tick)(void);
+	unsigned long (*add_tick)(unsigned long);
+
+	char *name;
+};
+
+extern struct sparc64_tick_ops *tick_ops;
+
+extern unsigned long sparc64_get_clock_tick(unsigned int cpu);
+extern void __devinit setup_sparc64_timer(void);
+extern void __init time_init(void);
+
+#endif /* _SPARC64_TIMER_H */
diff --git a/arch/sparc/include/asm/timex.h b/arch/sparc/include/asm/timex.h
new file mode 100644
index 000000000000..70cc37b73827
--- /dev/null
+++ b/arch/sparc/include/asm/timex.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TIMEX_H
+#define ___ASM_SPARC_TIMEX_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/timex_64.h>
+#else
+#include <asm/timex_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/timex_32.h b/arch/sparc/include/asm/timex_32.h
new file mode 100644
index 000000000000..b6ccdb0d6f7d
--- /dev/null
+++ b/arch/sparc/include/asm/timex_32.h
@@ -0,0 +1,15 @@
+/*
+ * linux/include/asm/timex.h
+ *
+ * sparc architecture timex specifications
+ */
+#ifndef _ASMsparc_TIMEX_H
+#define _ASMsparc_TIMEX_H
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+/* XXX Maybe do something better at some point... -DaveM */
+typedef unsigned long cycles_t;
+#define get_cycles()	(0)
+
+#endif
diff --git a/arch/sparc/include/asm/timex_64.h b/arch/sparc/include/asm/timex_64.h
new file mode 100644
index 000000000000..18b30bc9823b
--- /dev/null
+++ b/arch/sparc/include/asm/timex_64.h
@@ -0,0 +1,19 @@
+/*
+ * linux/include/asm/timex.h
+ *
+ * sparc64 architecture timex specifications
+ */
+#ifndef _ASMsparc64_TIMEX_H
+#define _ASMsparc64_TIMEX_H
+
+#include <asm/timer.h>
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+/* Getting on the cycle counter on sparc64. */
+typedef unsigned long cycles_t;
+#define get_cycles()	tick_ops->get_tick()
+
+#define ARCH_HAS_READ_CURRENT_TIMER
+
+#endif
diff --git a/arch/sparc/include/asm/tlb.h b/arch/sparc/include/asm/tlb.h
new file mode 100644
index 000000000000..92d0393bbcdc
--- /dev/null
+++ b/arch/sparc/include/asm/tlb.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TLB_H
+#define ___ASM_SPARC_TLB_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/tlb_64.h>
+#else
+#include <asm/tlb_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/tlb_32.h b/arch/sparc/include/asm/tlb_32.h
new file mode 100644
index 000000000000..6d02d1ce53f3
--- /dev/null
+++ b/arch/sparc/include/asm/tlb_32.h
@@ -0,0 +1,24 @@
+#ifndef _SPARC_TLB_H
+#define _SPARC_TLB_H
+
+#define tlb_start_vma(tlb, vma) \
+do {								\
+	flush_cache_range(vma, vma->vm_start, vma->vm_end);	\
+} while (0)
+
+#define tlb_end_vma(tlb, vma) \
+do {								\
+	flush_tlb_range(vma, vma->vm_start, vma->vm_end);	\
+} while (0)
+
+#define __tlb_remove_tlb_entry(tlb, pte, address) \
+	do { } while (0)
+
+#define tlb_flush(tlb) \
+do {								\
+	flush_tlb_mm((tlb)->mm);				\
+} while (0)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _SPARC_TLB_H */
diff --git a/arch/sparc/include/asm/tlb_64.h b/arch/sparc/include/asm/tlb_64.h
new file mode 100644
index 000000000000..ec81cdedef2c
--- /dev/null
+++ b/arch/sparc/include/asm/tlb_64.h
@@ -0,0 +1,111 @@
+#ifndef _SPARC64_TLB_H
+#define _SPARC64_TLB_H
+
+#include <linux/swap.h>
+#include <linux/pagemap.h>
+#include <asm/pgalloc.h>
+#include <asm/tlbflush.h>
+#include <asm/mmu_context.h>
+
+#define TLB_BATCH_NR	192
+
+/*
+ * For UP we don't need to worry about TLB flush
+ * and page free order so much..
+ */
+#ifdef CONFIG_SMP
+  #define FREE_PTE_NR	506
+  #define tlb_fast_mode(bp) ((bp)->pages_nr == ~0U)
+#else
+  #define FREE_PTE_NR	1
+  #define tlb_fast_mode(bp) 1
+#endif
+
+struct mmu_gather {
+	struct mm_struct *mm;
+	unsigned int pages_nr;
+	unsigned int need_flush;
+	unsigned int fullmm;
+	unsigned int tlb_nr;
+	unsigned long vaddrs[TLB_BATCH_NR];
+	struct page *pages[FREE_PTE_NR];
+};
+
+DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+#ifdef CONFIG_SMP
+extern void smp_flush_tlb_pending(struct mm_struct *,
+				  unsigned long, unsigned long *);
+#endif
+
+extern void __flush_tlb_pending(unsigned long, unsigned long, unsigned long *);
+extern void flush_tlb_pending(void);
+
+static inline struct mmu_gather *tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush)
+{
+	struct mmu_gather *mp = &get_cpu_var(mmu_gathers);
+
+	BUG_ON(mp->tlb_nr);
+
+	mp->mm = mm;
+	mp->pages_nr = num_online_cpus() > 1 ? 0U : ~0U;
+	mp->fullmm = full_mm_flush;
+
+	return mp;
+}
+
+
+static inline void tlb_flush_mmu(struct mmu_gather *mp)
+{
+	if (mp->need_flush) {
+		free_pages_and_swap_cache(mp->pages, mp->pages_nr);
+		mp->pages_nr = 0;
+		mp->need_flush = 0;
+	}
+
+}
+
+#ifdef CONFIG_SMP
+extern void smp_flush_tlb_mm(struct mm_struct *mm);
+#define do_flush_tlb_mm(mm) smp_flush_tlb_mm(mm)
+#else
+#define do_flush_tlb_mm(mm) __flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT)
+#endif
+
+static inline void tlb_finish_mmu(struct mmu_gather *mp, unsigned long start, unsigned long end)
+{
+	tlb_flush_mmu(mp);
+
+	if (mp->fullmm)
+		mp->fullmm = 0;
+	else
+		flush_tlb_pending();
+
+	/* keep the page table cache within bounds */
+	check_pgt_cache();
+
+	put_cpu_var(mmu_gathers);
+}
+
+static inline void tlb_remove_page(struct mmu_gather *mp, struct page *page)
+{
+	if (tlb_fast_mode(mp)) {
+		free_page_and_swap_cache(page);
+		return;
+	}
+	mp->need_flush = 1;
+	mp->pages[mp->pages_nr++] = page;
+	if (mp->pages_nr >= FREE_PTE_NR)
+		tlb_flush_mmu(mp);
+}
+
+#define tlb_remove_tlb_entry(mp,ptep,addr) do { } while (0)
+#define pte_free_tlb(mp, ptepage) pte_free((mp)->mm, ptepage)
+#define pmd_free_tlb(mp, pmdp) pmd_free((mp)->mm, pmdp)
+#define pud_free_tlb(tlb,pudp) __pud_free_tlb(tlb,pudp)
+
+#define tlb_migrate_finish(mm)	do { } while (0)
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma)	do { } while (0)
+
+#endif /* _SPARC64_TLB_H */
diff --git a/arch/sparc/include/asm/tlbflush.h b/arch/sparc/include/asm/tlbflush.h
new file mode 100644
index 000000000000..2c9629fad1e2
--- /dev/null
+++ b/arch/sparc/include/asm/tlbflush.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TLBFLUSH_H
+#define ___ASM_SPARC_TLBFLUSH_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/tlbflush_64.h>
+#else
+#include <asm/tlbflush_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/tlbflush_32.h b/arch/sparc/include/asm/tlbflush_32.h
new file mode 100644
index 000000000000..fe0a71abc9bb
--- /dev/null
+++ b/arch/sparc/include/asm/tlbflush_32.h
@@ -0,0 +1,60 @@
+#ifndef _SPARC_TLBFLUSH_H
+#define _SPARC_TLBFLUSH_H
+
+#include <linux/mm.h>
+// #include <asm/processor.h>
+
+/*
+ * TLB flushing:
+ *
+ *  - flush_tlb() flushes the current mm struct TLBs	XXX Exists?
+ *  - flush_tlb_all() flushes all processes TLBs
+ *  - flush_tlb_mm(mm) flushes the specified mm context TLB's
+ *  - flush_tlb_page(vma, vmaddr) flushes one page
+ *  - flush_tlb_range(vma, start, end) flushes a range of pages
+ *  - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ */
+
+#ifdef CONFIG_SMP
+
+BTFIXUPDEF_CALL(void, local_flush_tlb_all, void)
+BTFIXUPDEF_CALL(void, local_flush_tlb_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, local_flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, local_flush_tlb_page, struct vm_area_struct *, unsigned long)
+
+#define local_flush_tlb_all() BTFIXUP_CALL(local_flush_tlb_all)()
+#define local_flush_tlb_mm(mm) BTFIXUP_CALL(local_flush_tlb_mm)(mm)
+#define local_flush_tlb_range(vma,start,end) BTFIXUP_CALL(local_flush_tlb_range)(vma,start,end)
+#define local_flush_tlb_page(vma,addr) BTFIXUP_CALL(local_flush_tlb_page)(vma,addr)
+
+extern void smp_flush_tlb_all(void);
+extern void smp_flush_tlb_mm(struct mm_struct *mm);
+extern void smp_flush_tlb_range(struct vm_area_struct *vma,
+				  unsigned long start,
+				  unsigned long end);
+extern void smp_flush_tlb_page(struct vm_area_struct *mm, unsigned long page);
+
+#endif /* CONFIG_SMP */
+
+BTFIXUPDEF_CALL(void, flush_tlb_all, void)
+BTFIXUPDEF_CALL(void, flush_tlb_mm, struct mm_struct *)
+BTFIXUPDEF_CALL(void, flush_tlb_range, struct vm_area_struct *, unsigned long, unsigned long)
+BTFIXUPDEF_CALL(void, flush_tlb_page, struct vm_area_struct *, unsigned long)
+
+#define flush_tlb_all() BTFIXUP_CALL(flush_tlb_all)()
+#define flush_tlb_mm(mm) BTFIXUP_CALL(flush_tlb_mm)(mm)
+#define flush_tlb_range(vma,start,end) BTFIXUP_CALL(flush_tlb_range)(vma,start,end)
+#define flush_tlb_page(vma,addr) BTFIXUP_CALL(flush_tlb_page)(vma,addr)
+
+// #define flush_tlb() flush_tlb_mm(current->active_mm)	/* XXX Sure? */
+
+/*
+ * This is a kludge, until I know better. --zaitcev XXX
+ */
+static inline void flush_tlb_kernel_range(unsigned long start,
+					  unsigned long end)
+{
+	flush_tlb_all();
+}
+
+#endif /* _SPARC_TLBFLUSH_H */
diff --git a/arch/sparc/include/asm/tlbflush_64.h b/arch/sparc/include/asm/tlbflush_64.h
new file mode 100644
index 000000000000..fbb675dbe0c9
--- /dev/null
+++ b/arch/sparc/include/asm/tlbflush_64.h
@@ -0,0 +1,44 @@
+#ifndef _SPARC64_TLBFLUSH_H
+#define _SPARC64_TLBFLUSH_H
+
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
+
+/* TSB flush operations. */
+struct mmu_gather;
+extern void flush_tsb_kernel_range(unsigned long start, unsigned long end);
+extern void flush_tsb_user(struct mmu_gather *mp);
+
+/* TLB flush operations. */
+
+extern void flush_tlb_pending(void);
+
+#define flush_tlb_range(vma,start,end)	\
+	do { (void)(start); flush_tlb_pending(); } while (0)
+#define flush_tlb_page(vma,addr)	flush_tlb_pending()
+#define flush_tlb_mm(mm)		flush_tlb_pending()
+
+/* Local cpu only.  */
+extern void __flush_tlb_all(void);
+
+extern void __flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#ifndef CONFIG_SMP
+
+#define flush_tlb_kernel_range(start,end) \
+do {	flush_tsb_kernel_range(start,end); \
+	__flush_tlb_kernel_range(start,end); \
+} while (0)
+
+#else /* CONFIG_SMP */
+
+extern void smp_flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
+#define flush_tlb_kernel_range(start, end) \
+do {	flush_tsb_kernel_range(start,end); \
+	smp_flush_tlb_kernel_range(start, end); \
+} while (0)
+
+#endif /* ! CONFIG_SMP */
+
+#endif /* _SPARC64_TLBFLUSH_H */
diff --git a/arch/sparc/include/asm/topology.h b/arch/sparc/include/asm/topology.h
new file mode 100644
index 000000000000..ee4f191d394a
--- /dev/null
+++ b/arch/sparc/include/asm/topology.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_TOPOLOGY_H
+#define ___ASM_SPARC_TOPOLOGY_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/topology_64.h>
+#else
+#include <asm/topology_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/topology_32.h b/arch/sparc/include/asm/topology_32.h
new file mode 100644
index 000000000000..ee5ac9c9da28
--- /dev/null
+++ b/arch/sparc/include/asm/topology_32.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_SPARC_TOPOLOGY_H
+#define _ASM_SPARC_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_SPARC_TOPOLOGY_H */
diff --git a/arch/sparc/include/asm/topology_64.h b/arch/sparc/include/asm/topology_64.h
new file mode 100644
index 000000000000..001c04027c82
--- /dev/null
+++ b/arch/sparc/include/asm/topology_64.h
@@ -0,0 +1,86 @@
+#ifndef _ASM_SPARC64_TOPOLOGY_H
+#define _ASM_SPARC64_TOPOLOGY_H
+
+#ifdef CONFIG_NUMA
+
+#include <asm/mmzone.h>
+
+static inline int cpu_to_node(int cpu)
+{
+	return numa_cpu_lookup_table[cpu];
+}
+
+#define parent_node(node)	(node)
+
+static inline cpumask_t node_to_cpumask(int node)
+{
+	return numa_cpumask_lookup_table[node];
+}
+
+/* Returns a pointer to the cpumask of CPUs on Node 'node'. */
+#define node_to_cpumask_ptr(v, node)		\
+		cpumask_t *v = &(numa_cpumask_lookup_table[node])
+
+#define node_to_cpumask_ptr_next(v, node)	\
+			   v = &(numa_cpumask_lookup_table[node])
+
+static inline int node_to_first_cpu(int node)
+{
+	cpumask_t tmp;
+	tmp = node_to_cpumask(node);
+	return first_cpu(tmp);
+}
+
+struct pci_bus;
+#ifdef CONFIG_PCI
+extern int pcibus_to_node(struct pci_bus *pbus);
+#else
+static inline int pcibus_to_node(struct pci_bus *pbus)
+{
+	return -1;
+}
+#endif
+
+#define pcibus_to_cpumask(bus)	\
+	(pcibus_to_node(bus) == -1 ? \
+	 CPU_MASK_ALL : \
+	 node_to_cpumask(pcibus_to_node(bus)))
+
+#define SD_NODE_INIT (struct sched_domain) {		\
+	.min_interval		= 8,			\
+	.max_interval		= 32,			\
+	.busy_factor		= 32,			\
+	.imbalance_pct		= 125,			\
+	.cache_nice_tries	= 2,			\
+	.busy_idx		= 3,			\
+	.idle_idx		= 2,			\
+	.newidle_idx		= 0, 			\
+	.wake_idx		= 1,			\
+	.forkexec_idx		= 1,			\
+	.flags			= SD_LOAD_BALANCE	\
+				| SD_BALANCE_FORK	\
+				| SD_BALANCE_EXEC	\
+				| SD_SERIALIZE		\
+				| SD_WAKE_BALANCE,	\
+	.last_balance		= jiffies,		\
+	.balance_interval	= 1,			\
+}
+
+#else /* CONFIG_NUMA */
+
+#include <asm-generic/topology.h>
+
+#endif /* !(CONFIG_NUMA) */
+
+#ifdef CONFIG_SMP
+#define topology_physical_package_id(cpu)	(cpu_data(cpu).proc_id)
+#define topology_core_id(cpu)			(cpu_data(cpu).core_id)
+#define topology_core_siblings(cpu)		(cpu_core_map[cpu])
+#define topology_thread_siblings(cpu)		(per_cpu(cpu_sibling_map, cpu))
+#define mc_capable()				(sparc64_multi_core)
+#define smt_capable()				(sparc64_multi_core)
+#endif /* CONFIG_SMP */
+
+#define cpu_coregroup_map(cpu)			(cpu_core_map[cpu])
+
+#endif /* _ASM_SPARC64_TOPOLOGY_H */
diff --git a/arch/sparc/include/asm/traps.h b/arch/sparc/include/asm/traps.h
new file mode 100644
index 000000000000..bebdbf8f43a8
--- /dev/null
+++ b/arch/sparc/include/asm/traps.h
@@ -0,0 +1,140 @@
+/*
+ * traps.h:  Format of entries for the Sparc trap table.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_TRAPS_H
+#define _SPARC_TRAPS_H
+
+#define NUM_SPARC_TRAPS  255
+
+#ifndef __ASSEMBLY__
+
+/* This is for V8 compliant Sparc CPUS */
+struct tt_entry {
+	unsigned long inst_one;
+	unsigned long inst_two;
+	unsigned long inst_three;
+	unsigned long inst_four;
+};
+
+/* We set this to _start in system setup. */
+extern struct tt_entry *sparc_ttable;
+
+static inline unsigned long get_tbr(void)
+{
+	unsigned long tbr;
+
+	__asm__ __volatile__("rd %%tbr, %0\n\t" : "=r" (tbr));
+	return tbr;
+}
+
+#endif /* !(__ASSEMBLY__) */
+
+/* For patching the trap table at boot time, we need to know how to
+ * form various common Sparc instructions.  Thus these macros...
+ */
+
+#define SPARC_MOV_CONST_L3(const) (0xa6102000 | (const&0xfff))
+
+/* The following assumes that the branch lies before the place we
+ * are branching to.  This is the case for a trap vector...
+ * You have been warned.
+ */
+#define SPARC_BRANCH(dest_addr, inst_addr) \
+          (0x10800000 | (((dest_addr-inst_addr)>>2)&0x3fffff))
+
+#define SPARC_RD_PSR_L0  (0xa1480000)
+#define SPARC_RD_WIM_L3  (0xa7500000)
+#define SPARC_NOP (0x01000000)
+
+/* Various interesting trap levels. */
+/* First, hardware traps. */
+#define SP_TRAP_TFLT    0x1          /* Text fault */
+#define SP_TRAP_II      0x2          /* Illegal Instruction */
+#define SP_TRAP_PI      0x3          /* Privileged Instruction */
+#define SP_TRAP_FPD     0x4          /* Floating Point Disabled */
+#define SP_TRAP_WOVF    0x5          /* Window Overflow */
+#define SP_TRAP_WUNF    0x6          /* Window Underflow */
+#define SP_TRAP_MNA     0x7          /* Memory Address Unaligned */
+#define SP_TRAP_FPE     0x8          /* Floating Point Exception */
+#define SP_TRAP_DFLT    0x9          /* Data Fault */
+#define SP_TRAP_TOF     0xa          /* Tag Overflow */
+#define SP_TRAP_WDOG    0xb          /* Watchpoint Detected */
+#define SP_TRAP_IRQ1    0x11         /* IRQ level 1 */
+#define SP_TRAP_IRQ2    0x12         /* IRQ level 2 */
+#define SP_TRAP_IRQ3    0x13         /* IRQ level 3 */
+#define SP_TRAP_IRQ4    0x14         /* IRQ level 4 */
+#define SP_TRAP_IRQ5    0x15         /* IRQ level 5 */
+#define SP_TRAP_IRQ6    0x16         /* IRQ level 6 */
+#define SP_TRAP_IRQ7    0x17         /* IRQ level 7 */
+#define SP_TRAP_IRQ8    0x18         /* IRQ level 8 */
+#define SP_TRAP_IRQ9    0x19         /* IRQ level 9 */
+#define SP_TRAP_IRQ10   0x1a         /* IRQ level 10 */
+#define SP_TRAP_IRQ11   0x1b         /* IRQ level 11 */
+#define SP_TRAP_IRQ12   0x1c         /* IRQ level 12 */
+#define SP_TRAP_IRQ13   0x1d         /* IRQ level 13 */
+#define SP_TRAP_IRQ14   0x1e         /* IRQ level 14 */
+#define SP_TRAP_IRQ15   0x1f         /* IRQ level 15 Non-maskable */
+#define SP_TRAP_RACC    0x20         /* Register Access Error ??? */
+#define SP_TRAP_IACC    0x21         /* Instruction Access Error */
+#define SP_TRAP_CPDIS   0x24         /* Co-Processor Disabled */
+#define SP_TRAP_BADFL   0x25         /* Unimplemented Flush Instruction */
+#define SP_TRAP_CPEXP   0x28         /* Co-Processor Exception */
+#define SP_TRAP_DACC    0x29         /* Data Access Error */
+#define SP_TRAP_DIVZ    0x2a         /* Divide By Zero */
+#define SP_TRAP_DSTORE  0x2b         /* Data Store Error ??? */
+#define SP_TRAP_DMM     0x2c         /* Data Access MMU Miss ??? */
+#define SP_TRAP_IMM     0x3c         /* Instruction Access MMU Miss ??? */
+
+/* Now the Software Traps... */
+#define SP_TRAP_SUNOS   0x80         /* SunOS System Call */
+#define SP_TRAP_SBPT    0x81         /* Software Breakpoint */
+#define SP_TRAP_SDIVZ   0x82         /* Software Divide-by-Zero trap */
+#define SP_TRAP_FWIN    0x83         /* Flush Windows */
+#define SP_TRAP_CWIN    0x84         /* Clean Windows */
+#define SP_TRAP_RCHK    0x85         /* Range Check */
+#define SP_TRAP_FUNA    0x86         /* Fix Unaligned Access */
+#define SP_TRAP_IOWFL   0x87         /* Integer Overflow */
+#define SP_TRAP_SOLARIS 0x88         /* Solaris System Call */
+#define SP_TRAP_NETBSD  0x89         /* NetBSD System Call */
+#define SP_TRAP_LINUX   0x90         /* Linux System Call */
+
+/* Names used for compatibility with SunOS */
+#define ST_SYSCALL              0x00
+#define ST_BREAKPOINT           0x01
+#define ST_DIV0                 0x02
+#define ST_FLUSH_WINDOWS        0x03
+#define ST_CLEAN_WINDOWS        0x04
+#define ST_RANGE_CHECK          0x05
+#define ST_FIX_ALIGN            0x06
+#define ST_INT_OVERFLOW         0x07
+
+/* Special traps... */
+#define SP_TRAP_KBPT1   0xfe         /* KADB/PROM Breakpoint one */
+#define SP_TRAP_KBPT2   0xff         /* KADB/PROM Breakpoint two */
+
+/* Handy Macros */
+/* Is this a trap we never expect to get? */
+#define BAD_TRAP_P(level) \
+        ((level > SP_TRAP_WDOG && level < SP_TRAP_IRQ1) || \
+	 (level > SP_TRAP_IACC && level < SP_TRAP_CPDIS) || \
+	 (level > SP_TRAP_BADFL && level < SP_TRAP_CPEXP) || \
+	 (level > SP_TRAP_DMM && level < SP_TRAP_IMM) || \
+	 (level > SP_TRAP_IMM && level < SP_TRAP_SUNOS) || \
+	 (level > SP_TRAP_LINUX && level < SP_TRAP_KBPT1))
+
+/* Is this a Hardware trap? */
+#define HW_TRAP_P(level) ((level > 0) && (level < SP_TRAP_SUNOS))
+
+/* Is this a Software trap? */
+#define SW_TRAP_P(level) ((level >= SP_TRAP_SUNOS) && (level <= SP_TRAP_KBPT2))
+
+/* Is this a system call for some OS we know about? */
+#define SCALL_TRAP_P(level) ((level == SP_TRAP_SUNOS) || \
+			     (level == SP_TRAP_SOLARIS) || \
+			     (level == SP_TRAP_NETBSD) || \
+			     (level == SP_TRAP_LINUX))
+
+#endif /* !(_SPARC_TRAPS_H) */
diff --git a/arch/sparc/include/asm/tsb.h b/arch/sparc/include/asm/tsb.h
new file mode 100644
index 000000000000..76e4299dd9bc
--- /dev/null
+++ b/arch/sparc/include/asm/tsb.h
@@ -0,0 +1,283 @@
+#ifndef _SPARC64_TSB_H
+#define _SPARC64_TSB_H
+
+/* The sparc64 TSB is similar to the powerpc hashtables.  It's a
+ * power-of-2 sized table of TAG/PTE pairs.  The cpu precomputes
+ * pointers into this table for 8K and 64K page sizes, and also a
+ * comparison TAG based upon the virtual address and context which
+ * faults.
+ *
+ * TLB miss trap handler software does the actual lookup via something
+ * of the form:
+ *
+ * 	ldxa		[%g0] ASI_{D,I}MMU_TSB_8KB_PTR, %g1
+ * 	ldxa		[%g0] ASI_{D,I}MMU, %g6
+ *	sllx		%g6, 22, %g6
+ *	srlx		%g6, 22, %g6
+ * 	ldda		[%g1] ASI_NUCLEUS_QUAD_LDD, %g4
+ * 	cmp		%g4, %g6
+ * 	bne,pn	%xcc, tsb_miss_{d,i}tlb
+ * 	 mov		FAULT_CODE_{D,I}TLB, %g3
+ * 	stxa		%g5, [%g0] ASI_{D,I}TLB_DATA_IN
+ * 	retry
+ *
+ *
+ * Each 16-byte slot of the TSB is the 8-byte tag and then the 8-byte
+ * PTE.  The TAG is of the same layout as the TLB TAG TARGET mmu
+ * register which is:
+ *
+ * -------------------------------------------------
+ * |  -  |  CONTEXT |  -  |    VADDR bits 63:22    |
+ * -------------------------------------------------
+ *  63 61 60      48 47 42 41                     0
+ *
+ * But actually, since we use per-mm TSB's, we zero out the CONTEXT
+ * field.
+ *
+ * Like the powerpc hashtables we need to use locking in order to
+ * synchronize while we update the entries.  PTE updates need locking
+ * as well.
+ *
+ * We need to carefully choose a lock bits for the TSB entry.  We
+ * choose to use bit 47 in the tag.  Also, since we never map anything
+ * at page zero in context zero, we use zero as an invalid tag entry.
+ * When the lock bit is set, this forces a tag comparison failure.
+ */
+
+#define TSB_TAG_LOCK_BIT	47
+#define TSB_TAG_LOCK_HIGH	(1 << (TSB_TAG_LOCK_BIT - 32))
+
+#define TSB_TAG_INVALID_BIT	46
+#define TSB_TAG_INVALID_HIGH	(1 << (TSB_TAG_INVALID_BIT - 32))
+
+#define TSB_MEMBAR	membar	#StoreStore
+
+/* Some cpus support physical address quad loads.  We want to use
+ * those if possible so we don't need to hard-lock the TSB mapping
+ * into the TLB.  We encode some instruction patching in order to
+ * support this.
+ *
+ * The kernel TSB is locked into the TLB by virtue of being in the
+ * kernel image, so we don't play these games for swapper_tsb access.
+ */
+#ifndef __ASSEMBLY__
+struct tsb_ldquad_phys_patch_entry {
+	unsigned int	addr;
+	unsigned int	sun4u_insn;
+	unsigned int	sun4v_insn;
+};
+extern struct tsb_ldquad_phys_patch_entry __tsb_ldquad_phys_patch,
+	__tsb_ldquad_phys_patch_end;
+
+struct tsb_phys_patch_entry {
+	unsigned int	addr;
+	unsigned int	insn;
+};
+extern struct tsb_phys_patch_entry __tsb_phys_patch, __tsb_phys_patch_end;
+#endif
+#define TSB_LOAD_QUAD(TSB, REG)	\
+661:	ldda		[TSB] ASI_NUCLEUS_QUAD_LDD, REG; \
+	.section	.tsb_ldquad_phys_patch, "ax"; \
+	.word		661b; \
+	ldda		[TSB] ASI_QUAD_LDD_PHYS, REG; \
+	ldda		[TSB] ASI_QUAD_LDD_PHYS_4V, REG; \
+	.previous
+
+#define TSB_LOAD_TAG_HIGH(TSB, REG) \
+661:	lduwa		[TSB] ASI_N, REG; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	lduwa		[TSB] ASI_PHYS_USE_EC, REG; \
+	.previous
+
+#define TSB_LOAD_TAG(TSB, REG) \
+661:	ldxa		[TSB] ASI_N, REG; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	ldxa		[TSB] ASI_PHYS_USE_EC, REG; \
+	.previous
+
+#define TSB_CAS_TAG_HIGH(TSB, REG1, REG2) \
+661:	casa		[TSB] ASI_N, REG1, REG2; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	casa		[TSB] ASI_PHYS_USE_EC, REG1, REG2; \
+	.previous
+
+#define TSB_CAS_TAG(TSB, REG1, REG2) \
+661:	casxa		[TSB] ASI_N, REG1, REG2; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	casxa		[TSB] ASI_PHYS_USE_EC, REG1, REG2; \
+	.previous
+
+#define TSB_STORE(ADDR, VAL) \
+661:	stxa		VAL, [ADDR] ASI_N; \
+	.section	.tsb_phys_patch, "ax"; \
+	.word		661b; \
+	stxa		VAL, [ADDR] ASI_PHYS_USE_EC; \
+	.previous
+
+#define TSB_LOCK_TAG(TSB, REG1, REG2)	\
+99:	TSB_LOAD_TAG_HIGH(TSB, REG1);	\
+	sethi	%hi(TSB_TAG_LOCK_HIGH), REG2;\
+	andcc	REG1, REG2, %g0;	\
+	bne,pn	%icc, 99b;		\
+	 nop;				\
+	TSB_CAS_TAG_HIGH(TSB, REG1, REG2);	\
+	cmp	REG1, REG2;		\
+	bne,pn	%icc, 99b;		\
+	 nop;				\
+	TSB_MEMBAR
+
+#define TSB_WRITE(TSB, TTE, TAG) \
+	add	TSB, 0x8, TSB;   \
+	TSB_STORE(TSB, TTE);     \
+	sub	TSB, 0x8, TSB;   \
+	TSB_MEMBAR;              \
+	TSB_STORE(TSB, TAG);
+
+#define KTSB_LOAD_QUAD(TSB, REG) \
+	ldda		[TSB] ASI_NUCLEUS_QUAD_LDD, REG;
+
+#define KTSB_STORE(ADDR, VAL) \
+	stxa		VAL, [ADDR] ASI_N;
+
+#define KTSB_LOCK_TAG(TSB, REG1, REG2)	\
+99:	lduwa	[TSB] ASI_N, REG1;	\
+	sethi	%hi(TSB_TAG_LOCK_HIGH), REG2;\
+	andcc	REG1, REG2, %g0;	\
+	bne,pn	%icc, 99b;		\
+	 nop;				\
+	casa	[TSB] ASI_N, REG1, REG2;\
+	cmp	REG1, REG2;		\
+	bne,pn	%icc, 99b;		\
+	 nop;				\
+	TSB_MEMBAR
+
+#define KTSB_WRITE(TSB, TTE, TAG) \
+	add	TSB, 0x8, TSB;   \
+	stxa	TTE, [TSB] ASI_N;     \
+	sub	TSB, 0x8, TSB;   \
+	TSB_MEMBAR;              \
+	stxa	TAG, [TSB] ASI_N;
+
+	/* Do a kernel page table walk.  Leaves physical PTE pointer in
+	 * REG1.  Jumps to FAIL_LABEL on early page table walk termination.
+	 * VADDR will not be clobbered, but REG2 will.
+	 */
+#define KERN_PGTABLE_WALK(VADDR, REG1, REG2, FAIL_LABEL)	\
+	sethi		%hi(swapper_pg_dir), REG1; \
+	or		REG1, %lo(swapper_pg_dir), REG1; \
+	sllx		VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	andn		REG2, 0x3, REG2; \
+	lduw		[REG1 + REG2], REG1; \
+	brz,pn		REG1, FAIL_LABEL; \
+	 sllx		VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	sllx		REG1, 11, REG1; \
+	andn		REG2, 0x3, REG2; \
+	lduwa		[REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
+	brz,pn		REG1, FAIL_LABEL; \
+	 sllx		VADDR, 64 - PMD_SHIFT, REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	sllx		REG1, 11, REG1; \
+	andn		REG2, 0x7, REG2; \
+	add		REG1, REG2, REG1;
+
+	/* Do a user page table walk in MMU globals.  Leaves physical PTE
+	 * pointer in REG1.  Jumps to FAIL_LABEL on early page table walk
+	 * termination.  Physical base of page tables is in PHYS_PGD which
+	 * will not be modified.
+	 *
+	 * VADDR will not be clobbered, but REG1 and REG2 will.
+	 */
+#define USER_PGTABLE_WALK_TL1(VADDR, PHYS_PGD, REG1, REG2, FAIL_LABEL)	\
+	sllx		VADDR, 64 - (PGDIR_SHIFT + PGDIR_BITS), REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	andn		REG2, 0x3, REG2; \
+	lduwa		[PHYS_PGD + REG2] ASI_PHYS_USE_EC, REG1; \
+	brz,pn		REG1, FAIL_LABEL; \
+	 sllx		VADDR, 64 - (PMD_SHIFT + PMD_BITS), REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	sllx		REG1, 11, REG1; \
+	andn		REG2, 0x3, REG2; \
+	lduwa		[REG1 + REG2] ASI_PHYS_USE_EC, REG1; \
+	brz,pn		REG1, FAIL_LABEL; \
+	 sllx		VADDR, 64 - PMD_SHIFT, REG2; \
+	srlx		REG2, 64 - PAGE_SHIFT, REG2; \
+	sllx		REG1, 11, REG1; \
+	andn		REG2, 0x7, REG2; \
+	add		REG1, REG2, REG1;
+
+/* Lookup a OBP mapping on VADDR in the prom_trans[] table at TL>0.
+ * If no entry is found, FAIL_LABEL will be branched to.  On success
+ * the resulting PTE value will be left in REG1.  VADDR is preserved
+ * by this routine.
+ */
+#define OBP_TRANS_LOOKUP(VADDR, REG1, REG2, REG3, FAIL_LABEL) \
+	sethi		%hi(prom_trans), REG1; \
+	or		REG1, %lo(prom_trans), REG1; \
+97:	ldx		[REG1 + 0x00], REG2; \
+	brz,pn		REG2, FAIL_LABEL; \
+	 nop; \
+	ldx		[REG1 + 0x08], REG3; \
+	add		REG2, REG3, REG3; \
+	cmp		REG2, VADDR; \
+	bgu,pt		%xcc, 98f; \
+	 cmp		VADDR, REG3; \
+	bgeu,pt		%xcc, 98f; \
+	 ldx		[REG1 + 0x10], REG3; \
+	sub		VADDR, REG2, REG2; \
+	ba,pt		%xcc, 99f; \
+	 add		REG3, REG2, REG1; \
+98:	ba,pt		%xcc, 97b; \
+	 add		REG1, (3 * 8), REG1; \
+99:
+
+	/* We use a 32K TSB for the whole kernel, this allows to
+	 * handle about 16MB of modules and vmalloc mappings without
+	 * incurring many hash conflicts.
+	 */
+#define KERNEL_TSB_SIZE_BYTES	(32 * 1024)
+#define KERNEL_TSB_NENTRIES	\
+	(KERNEL_TSB_SIZE_BYTES / 16)
+#define KERNEL_TSB4M_NENTRIES	4096
+
+	/* Do a kernel TSB lookup at tl>0 on VADDR+TAG, branch to OK_LABEL
+	 * on TSB hit.  REG1, REG2, REG3, and REG4 are used as temporaries
+	 * and the found TTE will be left in REG1.  REG3 and REG4 must
+	 * be an even/odd pair of registers.
+	 *
+	 * VADDR and TAG will be preserved and not clobbered by this macro.
+	 */
+#define KERN_TSB_LOOKUP_TL1(VADDR, TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
+	sethi		%hi(swapper_tsb), REG1; \
+	or		REG1, %lo(swapper_tsb), REG1; \
+	srlx		VADDR, PAGE_SHIFT, REG2; \
+	and		REG2, (KERNEL_TSB_NENTRIES - 1), REG2; \
+	sllx		REG2, 4, REG2; \
+	add		REG1, REG2, REG2; \
+	KTSB_LOAD_QUAD(REG2, REG3); \
+	cmp		REG3, TAG; \
+	be,a,pt		%xcc, OK_LABEL; \
+	 mov		REG4, REG1;
+
+#ifndef CONFIG_DEBUG_PAGEALLOC
+	/* This version uses a trick, the TAG is already (VADDR >> 22) so
+	 * we can make use of that for the index computation.
+	 */
+#define KERN_TSB4M_LOOKUP_TL1(TAG, REG1, REG2, REG3, REG4, OK_LABEL) \
+	sethi		%hi(swapper_4m_tsb), REG1; \
+	or		REG1, %lo(swapper_4m_tsb), REG1; \
+	and		TAG, (KERNEL_TSB4M_NENTRIES - 1), REG2; \
+	sllx		REG2, 4, REG2; \
+	add		REG1, REG2, REG2; \
+	KTSB_LOAD_QUAD(REG2, REG3); \
+	cmp		REG3, TAG; \
+	be,a,pt		%xcc, OK_LABEL; \
+	 mov		REG4, REG1;
+#endif
+
+#endif /* !(_SPARC64_TSB_H) */
diff --git a/arch/sparc/include/asm/tsunami.h b/arch/sparc/include/asm/tsunami.h
new file mode 100644
index 000000000000..5bbd1d523baa
--- /dev/null
+++ b/arch/sparc/include/asm/tsunami.h
@@ -0,0 +1,64 @@
+/*
+ * tsunami.h:  Module specific definitions for Tsunami V8 Sparcs
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_TSUNAMI_H
+#define _SPARC_TSUNAMI_H
+
+#include <asm/asi.h>
+
+/* The MMU control register on the Tsunami:
+ *
+ * -----------------------------------------------------------------------
+ * | implvers |SW|AV|DV|MV| RSV |PC|ITD|ALC| RSV |PE| RC |IE|DE|RSV|NF|ME|
+ * -----------------------------------------------------------------------
+ *  31      24 23 22 21 20 19-18 17  16 14  13-12 11 10-9  8  7 6-2  1  0
+ *
+ * SW: Enable Software Table Walks  0=off 1=on
+ * AV: Address View bit
+ * DV: Data View bit
+ * MV: Memory View bit
+ * PC: Parity Control
+ * ITD: ITBR disable
+ * ALC: Alternate Cacheable
+ * PE: Parity Enable   0=off 1=on
+ * RC: Refresh Control
+ * IE: Instruction cache Enable  0=off 1=on
+ * DE: Data cache Enable  0=off 1=on
+ * NF: No Fault, same as all other SRMMUs
+ * ME: MMU Enable, same as all other SRMMUs
+ */
+
+#define TSUNAMI_SW        0x00800000
+#define TSUNAMI_AV        0x00400000
+#define TSUNAMI_DV        0x00200000
+#define TSUNAMI_MV        0x00100000
+#define TSUNAMI_PC        0x00020000
+#define TSUNAMI_ITD       0x00010000
+#define TSUNAMI_ALC       0x00008000
+#define TSUNAMI_PE        0x00001000
+#define TSUNAMI_RCMASK    0x00000C00
+#define TSUNAMI_IENAB     0x00000200
+#define TSUNAMI_DENAB     0x00000100
+#define TSUNAMI_NF        0x00000002
+#define TSUNAMI_ME        0x00000001
+
+static inline void tsunami_flush_icache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_IC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void tsunami_flush_dcache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_DC_FLCLEAR)
+			     : "memory");
+}
+
+#endif /* !(_SPARC_TSUNAMI_H) */
diff --git a/arch/sparc/include/asm/ttable.h b/arch/sparc/include/asm/ttable.h
new file mode 100644
index 000000000000..5708ba2719fb
--- /dev/null
+++ b/arch/sparc/include/asm/ttable.h
@@ -0,0 +1,658 @@
+#ifndef _SPARC64_TTABLE_H
+#define _SPARC64_TTABLE_H
+
+#include <asm/utrap.h>
+
+#ifdef __ASSEMBLY__
+#include <asm/thread_info.h>
+#endif
+
+#define BOOT_KERNEL b sparc64_boot; nop; nop; nop; nop; nop; nop; nop;
+
+/* We need a "cleaned" instruction... */
+#define CLEAN_WINDOW							\
+	rdpr	%cleanwin, %l0;		add	%l0, 1, %l0;		\
+	wrpr	%l0, 0x0, %cleanwin;					\
+	clr	%o0;	clr	%o1;	clr	%o2;	clr	%o3;	\
+	clr	%o4;	clr	%o5;	clr	%o6;	clr	%o7;	\
+	clr	%l0;	clr	%l1;	clr	%l2;	clr	%l3;	\
+	clr	%l4;	clr	%l5;	clr	%l6;	clr	%l7;	\
+	retry;								\
+	nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;
+
+#define TRAP(routine)					\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etrap;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o0;			\
+	ba,pt	%xcc, rtrap;				\
+	 nop;						\
+	nop;
+
+#define TRAP_7INSNS(routine)				\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etrap;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o0;			\
+	ba,pt	%xcc, rtrap;				\
+	 nop;
+
+#define TRAP_SAVEFPU(routine)				\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, do_fptrap;			\
+109:	 or	%g7, %lo(109b), %g7;			\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o0;			\
+	ba,pt	%xcc, rtrap;				\
+	 nop;						\
+	nop;
+
+#define TRAP_NOSAVE(routine)				\
+	ba,pt	%xcc, routine;				\
+	 nop;						\
+	nop; nop; nop; nop; nop; nop;
+
+#define TRAP_NOSAVE_7INSNS(routine)			\
+	ba,pt	%xcc, routine;				\
+	 nop;						\
+	nop; nop; nop; nop; nop;
+
+#define TRAPTL1(routine)				\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etraptl1;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o0;			\
+	ba,pt	%xcc, rtrap;				\
+	 nop;						\
+	nop;
+
+#define TRAP_ARG(routine, arg)				\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etrap;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	add	%sp, PTREGS_OFF, %o0;			\
+	call	routine;				\
+	 mov	arg, %o1;				\
+	ba,pt	%xcc, rtrap;				\
+	 nop;
+
+#define TRAPTL1_ARG(routine, arg)			\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etraptl1;				\
+109:	 or	%g7, %lo(109b), %g7;			\
+	add	%sp, PTREGS_OFF, %o0;			\
+	call	routine;				\
+	 mov	arg, %o1;				\
+	ba,pt	%xcc, rtrap;				\
+	 nop;
+
+#define SYSCALL_TRAP(routine, systbl)			\
+	rdpr	%pil, %g2;				\
+	mov	TSTATE_SYSCALL, %g3;			\
+	sethi	%hi(109f), %g7;				\
+	ba,pt	%xcc, etrap_syscall;			\
+109:	 or	%g7, %lo(109b), %g7;			\
+	sethi	%hi(systbl), %l7;			\
+	ba,pt	%xcc, routine;				\
+	 or	%l7, %lo(systbl), %l7;
+
+#define TRAP_UTRAP(handler,lvl)				\
+	mov	handler, %g3;				\
+	ba,pt	%xcc, utrap_trap;			\
+	 mov	lvl, %g4;				\
+	nop;						\
+	nop;						\
+	nop;						\
+	nop;						\
+	nop;
+
+#ifdef CONFIG_COMPAT
+#define	LINUX_32BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sys_call_table32)
+#else
+#define	LINUX_32BIT_SYSCALL_TRAP BTRAP(0x110)
+#endif
+#define LINUX_64BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall, sys_call_table64)
+#define GETCC_TRAP TRAP(getcc)
+#define SETCC_TRAP TRAP(setcc)
+#define BREAKPOINT_TRAP TRAP(breakpoint_trap)
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+
+#define TRAP_IRQ(routine, level)			\
+	rdpr	%pil, %g2;				\
+	wrpr	%g0, 15, %pil;				\
+	sethi	%hi(1f-4), %g7;				\
+	ba,pt	%xcc, etrap_irq;			\
+	 or	%g7, %lo(1f-4), %g7;			\
+	nop;						\
+	nop;						\
+	nop;						\
+	.subsection	2;				\
+1:	call	trace_hardirqs_off;			\
+	 nop;						\
+	mov	level, %o0;				\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o1;			\
+	ba,a,pt	%xcc, rtrap_irq;			\
+	.previous;
+
+#else
+
+#define TRAP_IRQ(routine, level)			\
+	rdpr	%pil, %g2;				\
+	wrpr	%g0, 15, %pil;				\
+	ba,pt	%xcc, etrap_irq;			\
+	 rd	%pc, %g7;				\
+	mov	level, %o0;				\
+	call	routine;				\
+	 add	%sp, PTREGS_OFF, %o1;			\
+	ba,a,pt	%xcc, rtrap_irq;
+
+#endif
+
+#define TRAP_IVEC TRAP_NOSAVE(do_ivec)
+
+#define BTRAP(lvl) TRAP_ARG(bad_trap, lvl)
+
+#define BTRAPTL1(lvl) TRAPTL1_ARG(bad_trap_tl1, lvl)
+
+#define FLUSH_WINDOW_TRAP						\
+	ba,pt	%xcc, etrap;						\
+	 rd	%pc, %g7;						\
+	flushw;								\
+	ldx	[%sp + PTREGS_OFF + PT_V9_TNPC], %l1;			\
+	add	%l1, 4, %l2;						\
+	stx	%l1, [%sp + PTREGS_OFF + PT_V9_TPC];			\
+	ba,pt	%xcc, rtrap;						\
+	 stx	%l2, [%sp + PTREGS_OFF + PT_V9_TNPC];
+
+#ifdef CONFIG_KPROBES
+#define KPROBES_TRAP(lvl) TRAP_IRQ(kprobe_trap, lvl)
+#else
+#define KPROBES_TRAP(lvl) TRAP_ARG(bad_trap, lvl)
+#endif
+
+#ifdef CONFIG_KGDB
+#define KGDB_TRAP(lvl) TRAP_IRQ(kgdb_trap, lvl)
+#else
+#define KGDB_TRAP(lvl) TRAP_ARG(bad_trap, lvl)
+#endif
+
+#define SUN4V_ITSB_MISS					\
+	ldxa	[%g0] ASI_SCRATCHPAD, %g2;		\
+	ldx	[%g2 + HV_FAULT_I_ADDR_OFFSET], %g4;	\
+	ldx	[%g2 + HV_FAULT_I_CTX_OFFSET], %g5;	\
+	srlx	%g4, 22, %g6;				\
+	ba,pt	%xcc, sun4v_itsb_miss;			\
+	 nop;						\
+	nop;						\
+	nop;
+
+#define SUN4V_DTSB_MISS					\
+	ldxa	[%g0] ASI_SCRATCHPAD, %g2;		\
+	ldx	[%g2 + HV_FAULT_D_ADDR_OFFSET], %g4;	\
+	ldx	[%g2 + HV_FAULT_D_CTX_OFFSET], %g5;	\
+	srlx	%g4, 22, %g6;				\
+	ba,pt	%xcc, sun4v_dtsb_miss;			\
+	 nop;						\
+	nop;						\
+	nop;
+
+/* Before touching these macros, you owe it to yourself to go and
+ * see how arch/sparc64/kernel/winfixup.S works... -DaveM
+ *
+ * For the user cases we used to use the %asi register, but
+ * it turns out that the "wr xxx, %asi" costs ~5 cycles, so
+ * now we use immediate ASI loads and stores instead.  Kudos
+ * to Greg Onufer for pointing out this performance anomaly.
+ *
+ * Further note that we cannot use the g2, g4, g5, and g7 alternate
+ * globals in the spill routines, check out the save instruction in
+ * arch/sparc64/kernel/etrap.S to see what I mean about g2, and
+ * g4/g5 are the globals which are preserved by etrap processing
+ * for the caller of it.  The g7 register is the return pc for
+ * etrap.  Finally, g6 is the current thread register so we cannot
+ * us it in the spill handlers either.  Most of these rules do not
+ * apply to fill processing, only g6 is not usable.
+ */
+
+/* Normal kernel spill */
+#define SPILL_0_NORMAL					\
+	stx	%l0, [%sp + STACK_BIAS + 0x00];		\
+	stx	%l1, [%sp + STACK_BIAS + 0x08];		\
+	stx	%l2, [%sp + STACK_BIAS + 0x10];		\
+	stx	%l3, [%sp + STACK_BIAS + 0x18];		\
+	stx	%l4, [%sp + STACK_BIAS + 0x20];		\
+	stx	%l5, [%sp + STACK_BIAS + 0x28];		\
+	stx	%l6, [%sp + STACK_BIAS + 0x30];		\
+	stx	%l7, [%sp + STACK_BIAS + 0x38];		\
+	stx	%i0, [%sp + STACK_BIAS + 0x40];		\
+	stx	%i1, [%sp + STACK_BIAS + 0x48];		\
+	stx	%i2, [%sp + STACK_BIAS + 0x50];		\
+	stx	%i3, [%sp + STACK_BIAS + 0x58];		\
+	stx	%i4, [%sp + STACK_BIAS + 0x60];		\
+	stx	%i5, [%sp + STACK_BIAS + 0x68];		\
+	stx	%i6, [%sp + STACK_BIAS + 0x70];		\
+	stx	%i7, [%sp + STACK_BIAS + 0x78];		\
+	saved; retry; nop; nop; nop; nop; nop; nop;	\
+	nop; nop; nop; nop; nop; nop; nop; nop;
+
+#define SPILL_0_NORMAL_ETRAP				\
+etrap_kernel_spill:					\
+	stx	%l0, [%sp + STACK_BIAS + 0x00];		\
+	stx	%l1, [%sp + STACK_BIAS + 0x08];		\
+	stx	%l2, [%sp + STACK_BIAS + 0x10];		\
+	stx	%l3, [%sp + STACK_BIAS + 0x18];		\
+	stx	%l4, [%sp + STACK_BIAS + 0x20];		\
+	stx	%l5, [%sp + STACK_BIAS + 0x28];		\
+	stx	%l6, [%sp + STACK_BIAS + 0x30];		\
+	stx	%l7, [%sp + STACK_BIAS + 0x38];		\
+	stx	%i0, [%sp + STACK_BIAS + 0x40];		\
+	stx	%i1, [%sp + STACK_BIAS + 0x48];		\
+	stx	%i2, [%sp + STACK_BIAS + 0x50];		\
+	stx	%i3, [%sp + STACK_BIAS + 0x58];		\
+	stx	%i4, [%sp + STACK_BIAS + 0x60];		\
+	stx	%i5, [%sp + STACK_BIAS + 0x68];		\
+	stx	%i6, [%sp + STACK_BIAS + 0x70];		\
+	stx	%i7, [%sp + STACK_BIAS + 0x78];		\
+	saved;						\
+	sub	%g1, 2, %g1;				\
+	ba,pt	%xcc, etrap_save;			\
+	wrpr	%g1, %cwp;				\
+	nop; nop; nop; nop; nop; nop; nop; nop;		\
+	nop; nop; nop; nop;
+
+/* Normal 64bit spill */
+#define SPILL_1_GENERIC(ASI)				\
+	add	%sp, STACK_BIAS + 0x00, %g1;		\
+	stxa	%l0, [%g1 + %g0] ASI;			\
+	mov	0x08, %g3;				\
+	stxa	%l1, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%l2, [%g1 + %g0] ASI;			\
+	stxa	%l3, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%l4, [%g1 + %g0] ASI;			\
+	stxa	%l5, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%l6, [%g1 + %g0] ASI;			\
+	stxa	%l7, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%i0, [%g1 + %g0] ASI;			\
+	stxa	%i1, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%i2, [%g1 + %g0] ASI;			\
+	stxa	%i3, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%i4, [%g1 + %g0] ASI;			\
+	stxa	%i5, [%g1 + %g3] ASI;			\
+	add	%g1, 0x10, %g1;				\
+	stxa	%i6, [%g1 + %g0] ASI;			\
+	stxa	%i7, [%g1 + %g3] ASI;			\
+	saved;						\
+	retry; nop; nop;				\
+	b,a,pt	%xcc, spill_fixup_dax;			\
+	b,a,pt	%xcc, spill_fixup_mna;			\
+	b,a,pt	%xcc, spill_fixup;
+
+#define SPILL_1_GENERIC_ETRAP				\
+etrap_user_spill_64bit:					\
+	stxa	%l0, [%sp + STACK_BIAS + 0x00] %asi;	\
+	stxa	%l1, [%sp + STACK_BIAS + 0x08] %asi;	\
+	stxa	%l2, [%sp + STACK_BIAS + 0x10] %asi;	\
+	stxa	%l3, [%sp + STACK_BIAS + 0x18] %asi;	\
+	stxa	%l4, [%sp + STACK_BIAS + 0x20] %asi;	\
+	stxa	%l5, [%sp + STACK_BIAS + 0x28] %asi;	\
+	stxa	%l6, [%sp + STACK_BIAS + 0x30] %asi;	\
+	stxa	%l7, [%sp + STACK_BIAS + 0x38] %asi;	\
+	stxa	%i0, [%sp + STACK_BIAS + 0x40] %asi;	\
+	stxa	%i1, [%sp + STACK_BIAS + 0x48] %asi;	\
+	stxa	%i2, [%sp + STACK_BIAS + 0x50] %asi;	\
+	stxa	%i3, [%sp + STACK_BIAS + 0x58] %asi;	\
+	stxa	%i4, [%sp + STACK_BIAS + 0x60] %asi;	\
+	stxa	%i5, [%sp + STACK_BIAS + 0x68] %asi;	\
+	stxa	%i6, [%sp + STACK_BIAS + 0x70] %asi;	\
+	stxa	%i7, [%sp + STACK_BIAS + 0x78] %asi;	\
+	saved;						\
+	sub	%g1, 2, %g1;				\
+	ba,pt	%xcc, etrap_save;			\
+	 wrpr	%g1, %cwp;				\
+	nop; nop; nop; nop; nop;			\
+	nop; nop; nop; nop;				\
+	ba,a,pt	%xcc, etrap_spill_fixup_64bit;		\
+	ba,a,pt	%xcc, etrap_spill_fixup_64bit;		\
+	ba,a,pt	%xcc, etrap_spill_fixup_64bit;
+
+#define SPILL_1_GENERIC_ETRAP_FIXUP			\
+etrap_spill_fixup_64bit:				\
+	ldub	[%g6 + TI_WSAVED], %g1;			\
+	sll	%g1, 3, %g3;				\
+	add	%g6, %g3, %g3;				\
+	stx	%sp, [%g3 + TI_RWIN_SPTRS];		\
+	sll	%g1, 7, %g3;				\
+	add	%g6, %g3, %g3;				\
+	stx	%l0, [%g3 + TI_REG_WINDOW + 0x00];	\
+	stx	%l1, [%g3 + TI_REG_WINDOW + 0x08];	\
+	stx	%l2, [%g3 + TI_REG_WINDOW + 0x10];	\
+	stx	%l3, [%g3 + TI_REG_WINDOW + 0x18];	\
+	stx	%l4, [%g3 + TI_REG_WINDOW + 0x20];	\
+	stx	%l5, [%g3 + TI_REG_WINDOW + 0x28];	\
+	stx	%l6, [%g3 + TI_REG_WINDOW + 0x30];	\
+	stx	%l7, [%g3 + TI_REG_WINDOW + 0x38];	\
+	stx	%i0, [%g3 + TI_REG_WINDOW + 0x40];	\
+	stx	%i1, [%g3 + TI_REG_WINDOW + 0x48];	\
+	stx	%i2, [%g3 + TI_REG_WINDOW + 0x50];	\
+	stx	%i3, [%g3 + TI_REG_WINDOW + 0x58];	\
+	stx	%i4, [%g3 + TI_REG_WINDOW + 0x60];	\
+	stx	%i5, [%g3 + TI_REG_WINDOW + 0x68];	\
+	stx	%i6, [%g3 + TI_REG_WINDOW + 0x70];	\
+	stx	%i7, [%g3 + TI_REG_WINDOW + 0x78];	\
+	add	%g1, 1, %g1;				\
+	stb	%g1, [%g6 + TI_WSAVED];			\
+	saved;						\
+	rdpr	%cwp, %g1;				\
+	sub	%g1, 2, %g1;				\
+	ba,pt	%xcc, etrap_save;			\
+	 wrpr	%g1, %cwp;				\
+	nop; nop; nop
+
+/* Normal 32bit spill */
+#define SPILL_2_GENERIC(ASI)				\
+	srl	%sp, 0, %sp;				\
+	stwa	%l0, [%sp + %g0] ASI;			\
+	mov	0x04, %g3;				\
+	stwa	%l1, [%sp + %g3] ASI;			\
+	add	%sp, 0x08, %g1;				\
+	stwa	%l2, [%g1 + %g0] ASI;			\
+	stwa	%l3, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%l4, [%g1 + %g0] ASI;			\
+	stwa	%l5, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%l6, [%g1 + %g0] ASI;			\
+	stwa	%l7, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%i0, [%g1 + %g0] ASI;			\
+	stwa	%i1, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%i2, [%g1 + %g0] ASI;			\
+	stwa	%i3, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%i4, [%g1 + %g0] ASI;			\
+	stwa	%i5, [%g1 + %g3] ASI;			\
+	add	%g1, 0x08, %g1;				\
+	stwa	%i6, [%g1 + %g0] ASI;			\
+	stwa	%i7, [%g1 + %g3] ASI;			\
+	saved;						\
+        retry; nop; nop;				\
+	b,a,pt	%xcc, spill_fixup_dax;			\
+	b,a,pt	%xcc, spill_fixup_mna;			\
+	b,a,pt	%xcc, spill_fixup;
+
+#define SPILL_2_GENERIC_ETRAP		\
+etrap_user_spill_32bit:			\
+	srl	%sp, 0, %sp;		\
+	stwa	%l0, [%sp + 0x00] %asi;	\
+	stwa	%l1, [%sp + 0x04] %asi;	\
+	stwa	%l2, [%sp + 0x08] %asi;	\
+	stwa	%l3, [%sp + 0x0c] %asi;	\
+	stwa	%l4, [%sp + 0x10] %asi;	\
+	stwa	%l5, [%sp + 0x14] %asi;	\
+	stwa	%l6, [%sp + 0x18] %asi;	\
+	stwa	%l7, [%sp + 0x1c] %asi;	\
+	stwa	%i0, [%sp + 0x20] %asi;	\
+	stwa	%i1, [%sp + 0x24] %asi;	\
+	stwa	%i2, [%sp + 0x28] %asi;	\
+	stwa	%i3, [%sp + 0x2c] %asi;	\
+	stwa	%i4, [%sp + 0x30] %asi;	\
+	stwa	%i5, [%sp + 0x34] %asi;	\
+	stwa	%i6, [%sp + 0x38] %asi;	\
+	stwa	%i7, [%sp + 0x3c] %asi;	\
+	saved;				\
+	sub	%g1, 2, %g1;		\
+	ba,pt	%xcc, etrap_save;	\
+	 wrpr	%g1, %cwp;		\
+	nop; nop; nop; nop;		\
+	nop; nop; nop; nop;		\
+	ba,a,pt	%xcc, etrap_spill_fixup_32bit; \
+	ba,a,pt	%xcc, etrap_spill_fixup_32bit; \
+	ba,a,pt	%xcc, etrap_spill_fixup_32bit;
+
+#define SPILL_2_GENERIC_ETRAP_FIXUP			\
+etrap_spill_fixup_32bit:				\
+	ldub	[%g6 + TI_WSAVED], %g1;			\
+	sll	%g1, 3, %g3;				\
+	add	%g6, %g3, %g3;				\
+	stx	%sp, [%g3 + TI_RWIN_SPTRS];		\
+	sll	%g1, 7, %g3;				\
+	add	%g6, %g3, %g3;				\
+	stw	%l0, [%g3 + TI_REG_WINDOW + 0x00];	\
+	stw	%l1, [%g3 + TI_REG_WINDOW + 0x04];	\
+	stw	%l2, [%g3 + TI_REG_WINDOW + 0x08];	\
+	stw	%l3, [%g3 + TI_REG_WINDOW + 0x0c];	\
+	stw	%l4, [%g3 + TI_REG_WINDOW + 0x10];	\
+	stw	%l5, [%g3 + TI_REG_WINDOW + 0x14];	\
+	stw	%l6, [%g3 + TI_REG_WINDOW + 0x18];	\
+	stw	%l7, [%g3 + TI_REG_WINDOW + 0x1c];	\
+	stw	%i0, [%g3 + TI_REG_WINDOW + 0x20];	\
+	stw	%i1, [%g3 + TI_REG_WINDOW + 0x24];	\
+	stw	%i2, [%g3 + TI_REG_WINDOW + 0x28];	\
+	stw	%i3, [%g3 + TI_REG_WINDOW + 0x2c];	\
+	stw	%i4, [%g3 + TI_REG_WINDOW + 0x30];	\
+	stw	%i5, [%g3 + TI_REG_WINDOW + 0x34];	\
+	stw	%i6, [%g3 + TI_REG_WINDOW + 0x38];	\
+	stw	%i7, [%g3 + TI_REG_WINDOW + 0x3c];	\
+	add	%g1, 1, %g1;				\
+	stb	%g1, [%g6 + TI_WSAVED];			\
+	saved;						\
+	rdpr	%cwp, %g1;				\
+	sub	%g1, 2, %g1;				\
+	ba,pt	%xcc, etrap_save;			\
+	 wrpr	%g1, %cwp;				\
+	nop; nop; nop
+
+#define SPILL_1_NORMAL SPILL_1_GENERIC(ASI_AIUP)
+#define SPILL_2_NORMAL SPILL_2_GENERIC(ASI_AIUP)
+#define SPILL_3_NORMAL SPILL_0_NORMAL
+#define SPILL_4_NORMAL SPILL_0_NORMAL
+#define SPILL_5_NORMAL SPILL_0_NORMAL
+#define SPILL_6_NORMAL SPILL_0_NORMAL
+#define SPILL_7_NORMAL SPILL_0_NORMAL
+
+#define SPILL_0_OTHER SPILL_0_NORMAL
+#define SPILL_1_OTHER SPILL_1_GENERIC(ASI_AIUS)
+#define SPILL_2_OTHER SPILL_2_GENERIC(ASI_AIUS)
+#define SPILL_3_OTHER SPILL_3_NORMAL
+#define SPILL_4_OTHER SPILL_4_NORMAL
+#define SPILL_5_OTHER SPILL_5_NORMAL
+#define SPILL_6_OTHER SPILL_6_NORMAL
+#define SPILL_7_OTHER SPILL_7_NORMAL
+
+/* Normal kernel fill */
+#define FILL_0_NORMAL					\
+	ldx	[%sp + STACK_BIAS + 0x00], %l0;		\
+	ldx	[%sp + STACK_BIAS + 0x08], %l1;		\
+	ldx	[%sp + STACK_BIAS + 0x10], %l2;		\
+	ldx	[%sp + STACK_BIAS + 0x18], %l3;		\
+	ldx	[%sp + STACK_BIAS + 0x20], %l4;		\
+	ldx	[%sp + STACK_BIAS + 0x28], %l5;		\
+	ldx	[%sp + STACK_BIAS + 0x30], %l6;		\
+	ldx	[%sp + STACK_BIAS + 0x38], %l7;		\
+	ldx	[%sp + STACK_BIAS + 0x40], %i0;		\
+	ldx	[%sp + STACK_BIAS + 0x48], %i1;		\
+	ldx	[%sp + STACK_BIAS + 0x50], %i2;		\
+	ldx	[%sp + STACK_BIAS + 0x58], %i3;		\
+	ldx	[%sp + STACK_BIAS + 0x60], %i4;		\
+	ldx	[%sp + STACK_BIAS + 0x68], %i5;		\
+	ldx	[%sp + STACK_BIAS + 0x70], %i6;		\
+	ldx	[%sp + STACK_BIAS + 0x78], %i7;		\
+	restored; retry; nop; nop; nop; nop; nop; nop;	\
+	nop; nop; nop; nop; nop; nop; nop; nop;
+
+#define FILL_0_NORMAL_RTRAP				\
+kern_rtt_fill:						\
+	rdpr	%cwp, %g1;				\
+	sub	%g1, 1, %g1;				\
+	wrpr	%g1, %cwp;				\
+	ldx	[%sp + STACK_BIAS + 0x00], %l0;		\
+	ldx	[%sp + STACK_BIAS + 0x08], %l1;		\
+	ldx	[%sp + STACK_BIAS + 0x10], %l2;		\
+	ldx	[%sp + STACK_BIAS + 0x18], %l3;		\
+	ldx	[%sp + STACK_BIAS + 0x20], %l4;		\
+	ldx	[%sp + STACK_BIAS + 0x28], %l5;		\
+	ldx	[%sp + STACK_BIAS + 0x30], %l6;		\
+	ldx	[%sp + STACK_BIAS + 0x38], %l7;		\
+	ldx	[%sp + STACK_BIAS + 0x40], %i0;		\
+	ldx	[%sp + STACK_BIAS + 0x48], %i1;		\
+	ldx	[%sp + STACK_BIAS + 0x50], %i2;		\
+	ldx	[%sp + STACK_BIAS + 0x58], %i3;		\
+	ldx	[%sp + STACK_BIAS + 0x60], %i4;		\
+	ldx	[%sp + STACK_BIAS + 0x68], %i5;		\
+	ldx	[%sp + STACK_BIAS + 0x70], %i6;		\
+	ldx	[%sp + STACK_BIAS + 0x78], %i7;		\
+	restored;					\
+	add	%g1, 1, %g1;				\
+	ba,pt	%xcc, kern_rtt_restore;			\
+	 wrpr	%g1, %cwp;				\
+	nop; nop; nop; nop; nop;			\
+	nop; nop; nop; nop;
+
+
+/* Normal 64bit fill */
+#define FILL_1_GENERIC(ASI)				\
+	add	%sp, STACK_BIAS + 0x00, %g1;		\
+	ldxa	[%g1 + %g0] ASI, %l0;			\
+	mov	0x08, %g2;				\
+	mov	0x10, %g3;				\
+	ldxa	[%g1 + %g2] ASI, %l1;			\
+	mov	0x18, %g5;				\
+	ldxa	[%g1 + %g3] ASI, %l2;			\
+	ldxa	[%g1 + %g5] ASI, %l3;			\
+	add	%g1, 0x20, %g1;				\
+	ldxa	[%g1 + %g0] ASI, %l4;			\
+	ldxa	[%g1 + %g2] ASI, %l5;			\
+	ldxa	[%g1 + %g3] ASI, %l6;			\
+	ldxa	[%g1 + %g5] ASI, %l7;			\
+	add	%g1, 0x20, %g1;				\
+	ldxa	[%g1 + %g0] ASI, %i0;			\
+	ldxa	[%g1 + %g2] ASI, %i1;			\
+	ldxa	[%g1 + %g3] ASI, %i2;			\
+	ldxa	[%g1 + %g5] ASI, %i3;			\
+	add	%g1, 0x20, %g1;				\
+	ldxa	[%g1 + %g0] ASI, %i4;			\
+	ldxa	[%g1 + %g2] ASI, %i5;			\
+	ldxa	[%g1 + %g3] ASI, %i6;			\
+	ldxa	[%g1 + %g5] ASI, %i7;			\
+	restored;					\
+	retry; nop; nop; nop; nop;			\
+	b,a,pt	%xcc, fill_fixup_dax;			\
+	b,a,pt	%xcc, fill_fixup_mna;			\
+	b,a,pt	%xcc, fill_fixup;
+
+#define FILL_1_GENERIC_RTRAP				\
+user_rtt_fill_64bit:					\
+	ldxa	[%sp + STACK_BIAS + 0x00] %asi, %l0;	\
+	ldxa	[%sp + STACK_BIAS + 0x08] %asi, %l1;	\
+	ldxa	[%sp + STACK_BIAS + 0x10] %asi, %l2;	\
+	ldxa	[%sp + STACK_BIAS + 0x18] %asi, %l3;	\
+	ldxa	[%sp + STACK_BIAS + 0x20] %asi, %l4;	\
+	ldxa	[%sp + STACK_BIAS + 0x28] %asi, %l5;	\
+	ldxa	[%sp + STACK_BIAS + 0x30] %asi, %l6;	\
+	ldxa	[%sp + STACK_BIAS + 0x38] %asi, %l7;	\
+	ldxa	[%sp + STACK_BIAS + 0x40] %asi, %i0;	\
+	ldxa	[%sp + STACK_BIAS + 0x48] %asi, %i1;	\
+	ldxa	[%sp + STACK_BIAS + 0x50] %asi, %i2;	\
+	ldxa	[%sp + STACK_BIAS + 0x58] %asi, %i3;	\
+	ldxa	[%sp + STACK_BIAS + 0x60] %asi, %i4;	\
+	ldxa	[%sp + STACK_BIAS + 0x68] %asi, %i5;	\
+	ldxa	[%sp + STACK_BIAS + 0x70] %asi, %i6;	\
+	ldxa	[%sp + STACK_BIAS + 0x78] %asi, %i7;	\
+	ba,pt	%xcc, user_rtt_pre_restore;		\
+	 restored;					\
+	nop; nop; nop; nop; nop; nop;			\
+	nop; nop; nop; nop; nop;			\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;
+
+
+/* Normal 32bit fill */
+#define FILL_2_GENERIC(ASI)				\
+	srl	%sp, 0, %sp;				\
+	lduwa	[%sp + %g0] ASI, %l0;			\
+	mov	0x04, %g2;				\
+	mov	0x08, %g3;				\
+	lduwa	[%sp + %g2] ASI, %l1;			\
+	mov	0x0c, %g5;				\
+	lduwa	[%sp + %g3] ASI, %l2;			\
+	lduwa	[%sp + %g5] ASI, %l3;			\
+	add	%sp, 0x10, %g1;				\
+	lduwa	[%g1 + %g0] ASI, %l4;			\
+	lduwa	[%g1 + %g2] ASI, %l5;			\
+	lduwa	[%g1 + %g3] ASI, %l6;			\
+	lduwa	[%g1 + %g5] ASI, %l7;			\
+	add	%g1, 0x10, %g1;				\
+	lduwa	[%g1 + %g0] ASI, %i0;			\
+	lduwa	[%g1 + %g2] ASI, %i1;			\
+	lduwa	[%g1 + %g3] ASI, %i2;			\
+	lduwa	[%g1 + %g5] ASI, %i3;			\
+	add	%g1, 0x10, %g1;				\
+	lduwa	[%g1 + %g0] ASI, %i4;			\
+	lduwa	[%g1 + %g2] ASI, %i5;			\
+	lduwa	[%g1 + %g3] ASI, %i6;			\
+	lduwa	[%g1 + %g5] ASI, %i7;			\
+	restored;					\
+	retry; nop; nop; nop; nop;			\
+	b,a,pt	%xcc, fill_fixup_dax;			\
+	b,a,pt	%xcc, fill_fixup_mna;			\
+	b,a,pt	%xcc, fill_fixup;
+
+#define FILL_2_GENERIC_RTRAP				\
+user_rtt_fill_32bit:					\
+	srl	%sp, 0, %sp;				\
+	lduwa	[%sp + 0x00] %asi, %l0;			\
+	lduwa	[%sp + 0x04] %asi, %l1;			\
+	lduwa	[%sp + 0x08] %asi, %l2;			\
+	lduwa	[%sp + 0x0c] %asi, %l3;			\
+	lduwa	[%sp + 0x10] %asi, %l4;			\
+	lduwa	[%sp + 0x14] %asi, %l5;			\
+	lduwa	[%sp + 0x18] %asi, %l6;			\
+	lduwa	[%sp + 0x1c] %asi, %l7;			\
+	lduwa	[%sp + 0x20] %asi, %i0;			\
+	lduwa	[%sp + 0x24] %asi, %i1;			\
+	lduwa	[%sp + 0x28] %asi, %i2;			\
+	lduwa	[%sp + 0x2c] %asi, %i3;			\
+	lduwa	[%sp + 0x30] %asi, %i4;			\
+	lduwa	[%sp + 0x34] %asi, %i5;			\
+	lduwa	[%sp + 0x38] %asi, %i6;			\
+	lduwa	[%sp + 0x3c] %asi, %i7;			\
+	ba,pt	%xcc, user_rtt_pre_restore;		\
+	 restored;					\
+	nop; nop; nop; nop; nop;			\
+	nop; nop; nop; nop; nop;			\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
+	ba,a,pt	%xcc, user_rtt_fill_fixup;
+
+
+#define FILL_1_NORMAL FILL_1_GENERIC(ASI_AIUP)
+#define FILL_2_NORMAL FILL_2_GENERIC(ASI_AIUP)
+#define FILL_3_NORMAL FILL_0_NORMAL
+#define FILL_4_NORMAL FILL_0_NORMAL
+#define FILL_5_NORMAL FILL_0_NORMAL
+#define FILL_6_NORMAL FILL_0_NORMAL
+#define FILL_7_NORMAL FILL_0_NORMAL
+
+#define FILL_0_OTHER FILL_0_NORMAL
+#define FILL_1_OTHER FILL_1_GENERIC(ASI_AIUS)
+#define FILL_2_OTHER FILL_2_GENERIC(ASI_AIUS)
+#define FILL_3_OTHER FILL_3_NORMAL
+#define FILL_4_OTHER FILL_4_NORMAL
+#define FILL_5_OTHER FILL_5_NORMAL
+#define FILL_6_OTHER FILL_6_NORMAL
+#define FILL_7_OTHER FILL_7_NORMAL
+
+#endif /* !(_SPARC64_TTABLE_H) */
diff --git a/arch/sparc/include/asm/turbosparc.h b/arch/sparc/include/asm/turbosparc.h
new file mode 100644
index 000000000000..17c73282db0a
--- /dev/null
+++ b/arch/sparc/include/asm/turbosparc.h
@@ -0,0 +1,125 @@
+/*
+ * turbosparc.h:  Defines specific to the TurboSparc module.
+ *            This is SRMMU stuff.
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _SPARC_TURBOSPARC_H
+#define _SPARC_TURBOSPARC_H
+
+#include <asm/asi.h>
+#include <asm/pgtsrmmu.h>
+
+/* Bits in the SRMMU control register for TurboSparc modules.
+ *
+ * -------------------------------------------------------------------
+ * |impl-vers| RSV| PMC |PE|PC| RSV |BM| RFR |IC|DC|PSO|RSV|ICS|NF|ME|
+ * -------------------------------------------------------------------
+ *  31    24 23-21 20-19 18 17 16-15 14 13-10  9  8  7  6-3   2  1  0
+ *
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ *
+ * This indicates whether the TurboSparc is in boot-mode or not.
+ *
+ * IC: Instruction Cache -- 0 = off, 1 = on
+ * DC: Data Cache -- 0 = off, 1 = 0n
+ *
+ * These bits enable the on-cpu TurboSparc split I/D caches.
+ *
+ * ICS: ICache Snooping -- 0 = disable, 1 = enable snooping of icache
+ * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap
+ * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating
+ *
+ */
+
+#define TURBOSPARC_MMUENABLE    0x00000001
+#define TURBOSPARC_NOFAULT      0x00000002
+#define TURBOSPARC_ICSNOOP	0x00000004
+#define TURBOSPARC_PSO          0x00000080
+#define TURBOSPARC_DCENABLE     0x00000100   /* Enable data cache */
+#define TURBOSPARC_ICENABLE     0x00000200   /* Enable instruction cache */
+#define TURBOSPARC_BMODE        0x00004000   
+#define TURBOSPARC_PARITYODD	0x00020000   /* Parity odd, if enabled */
+#define TURBOSPARC_PCENABLE	0x00040000   /* Enable parity checking */
+
+/* Bits in the CPU configuration register for TurboSparc modules.
+ *
+ * -------------------------------------------------------
+ * |IOClk|SNP|AXClk| RAH |  WS |  RSV  |SBC|WT|uS2|SE|SCC|
+ * -------------------------------------------------------
+ *    31   30 29-28 27-26 25-23   22-8  7-6  5  4   3 2-0
+ *
+ */
+
+#define TURBOSPARC_SCENABLE 0x00000008	 /* Secondary cache enable */
+#define TURBOSPARC_uS2	    0x00000010   /* Swift compatibility mode */
+#define TURBOSPARC_WTENABLE 0x00000020	 /* Write thru for dcache */
+#define TURBOSPARC_SNENABLE 0x40000000	 /* DVMA snoop enable */
+
+#ifndef __ASSEMBLY__
+
+/* Bits [13:5] select one of 512 instruction cache tags */
+static inline void turbosparc_inv_insn_tag(unsigned long addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_TXTC_TAG)
+			     : "memory");
+}
+
+/* Bits [13:5] select one of 512 data cache tags */
+static inline void turbosparc_inv_data_tag(unsigned long addr)
+{
+        __asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (addr), "i" (ASI_M_DATAC_TAG)
+			     : "memory");
+}
+
+static inline void turbosparc_flush_icache(void)
+{
+	unsigned long addr;
+
+        for (addr = 0; addr < 0x4000; addr += 0x20)
+                turbosparc_inv_insn_tag(addr);
+}
+
+static inline void turbosparc_flush_dcache(void)
+{
+	unsigned long addr;
+
+        for (addr = 0; addr < 0x4000; addr += 0x20)
+                turbosparc_inv_data_tag(addr);
+}
+
+static inline void turbosparc_idflash_clear(void)
+{
+	unsigned long addr;
+
+        for (addr = 0; addr < 0x4000; addr += 0x20) {
+                turbosparc_inv_insn_tag(addr);
+                turbosparc_inv_data_tag(addr);
+	}
+}
+
+static inline void turbosparc_set_ccreg(unsigned long regval)
+{
+	__asm__ __volatile__("sta %0, [%1] %2\n\t"
+			     : /* no outputs */
+			     : "r" (regval), "r" (0x600), "i" (ASI_M_MMUREGS)
+			     : "memory");
+}
+
+static inline unsigned long turbosparc_get_ccreg(void)
+{
+	unsigned long regval;
+
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (regval)
+			     : "r" (0x600), "i" (ASI_M_MMUREGS));
+	return regval;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_TURBOSPARC_H) */
diff --git a/arch/sparc/include/asm/types.h b/arch/sparc/include/asm/types.h
new file mode 100644
index 000000000000..8c28fde5eaa2
--- /dev/null
+++ b/arch/sparc/include/asm/types.h
@@ -0,0 +1,62 @@
+#ifndef _SPARC_TYPES_H
+#define _SPARC_TYPES_H
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+#if defined(__sparc__) && defined(__arch64__)
+
+/*** SPARC 64 bit ***/
+#include <asm-generic/int-l64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 64
+
+#ifndef __ASSEMBLY__
+
+/* Dma addresses come in generic and 64-bit flavours.  */
+
+typedef u32 dma_addr_t;
+typedef u64 dma64_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+#else
+
+/*** SPARC 32 bit ***/
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef u32 dma_addr_t;
+typedef u32 dma64_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* defined(__sparc__) && defined(__arch64__) */
+
+#endif /* defined(_SPARC_TYPES_H) */
diff --git a/arch/sparc/include/asm/uaccess.h b/arch/sparc/include/asm/uaccess.h
new file mode 100644
index 000000000000..e88fbe5c0457
--- /dev/null
+++ b/arch/sparc/include/asm/uaccess.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_UACCESS_H
+#define ___ASM_SPARC_UACCESS_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/uaccess_64.h>
+#else
+#include <asm/uaccess_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/uaccess_32.h b/arch/sparc/include/asm/uaccess_32.h
new file mode 100644
index 000000000000..47d5619d43fa
--- /dev/null
+++ b/arch/sparc/include/asm/uaccess_32.h
@@ -0,0 +1,336 @@
+/*
+ * uaccess.h: User space memore access functions.
+ *
+ * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <asm/vac-ops.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+/* Sparc is not segmented, however we need to be able to fool access_ok()
+ * when doing system calls from kernel mode legitimately.
+ *
+ * "For historical reasons, these macros are grossly misnamed." -Linus
+ */
+
+#define KERNEL_DS   ((mm_segment_t) { 0 })
+#define USER_DS     ((mm_segment_t) { -1 })
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(current->thread.current_ds)
+#define set_fs(val)	((current->thread.current_ds) = (val))
+
+#define segment_eq(a,b)	((a).seg == (b).seg)
+
+/* We have there a nice not-mapped page at PAGE_OFFSET - PAGE_SIZE, so that this test
+ * can be fairly lightweight.
+ * No one can read/write anything from userland in the kernel space by setting
+ * large size and address near to PAGE_OFFSET - a fault will break his intentions.
+ */
+#define __user_ok(addr, size) ({ (void)(size); (addr) < STACK_TOP; })
+#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
+#define __access_ok(addr,size) (__user_ok((addr) & get_fs().seg,(size)))
+#define access_ok(type, addr, size)					\
+	({ (void)(type); __access_ok((unsigned long)(addr), size); })
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ *
+ * There is a special way how to put a range of potentially faulting
+ * insns (like twenty ldd/std's with now intervening other instructions)
+ * You specify address of first in insn and 0 in fixup and in the next
+ * exception_table_entry you specify last potentially faulting insn + 1
+ * and in fixup the routine which should handle the fault.
+ * That fixup code will get
+ * (faulting_insn_address - first_insn_in_the_range_address)/4
+ * in %g2 (ie. index of the faulting instruction in the range).
+ */
+
+struct exception_table_entry
+{
+        unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_extables_range(unsigned long addr, unsigned long *g2);
+
+extern void __ret_efault(void);
+
+/* Uh, these should become the main single-value transfer routines..
+ * They automatically use the right size if we just have the right
+ * pointer type..
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ */
+#define put_user(x,ptr) ({ \
+unsigned long __pu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__put_user_check((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); })
+
+#define get_user(x,ptr) ({ \
+unsigned long __gu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__get_user_check((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); })
+
+/*
+ * The "__xxx" versions do not do address space checking, useful when
+ * doing multiple accesses to the same area (the user has to do the
+ * checks by hand with "access_ok()")
+ */
+#define __put_user(x,ptr) __put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
+#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)),__typeof__(*(ptr)))
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) ((struct __large_struct __user *)(x))
+
+#define __put_user_check(x,addr,size) ({ \
+register int __pu_ret; \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __put_user_asm(x,b,addr,__pu_ret); break; \
+case 2: __put_user_asm(x,h,addr,__pu_ret); break; \
+case 4: __put_user_asm(x,,addr,__pu_ret); break; \
+case 8: __put_user_asm(x,d,addr,__pu_ret); break; \
+default: __pu_ret = __put_user_bad(); break; \
+} } else { __pu_ret = -EFAULT; } __pu_ret; })
+
+#define __put_user_nocheck(x,addr,size) ({ \
+register int __pu_ret; \
+switch (size) { \
+case 1: __put_user_asm(x,b,addr,__pu_ret); break; \
+case 2: __put_user_asm(x,h,addr,__pu_ret); break; \
+case 4: __put_user_asm(x,,addr,__pu_ret); break; \
+case 8: __put_user_asm(x,d,addr,__pu_ret); break; \
+default: __pu_ret = __put_user_bad(); break; \
+} __pu_ret; })
+
+#define __put_user_asm(x,size,addr,ret)					\
+__asm__ __volatile__(							\
+	"/* Put user asm, inline. */\n"					\
+"1:\t"	"st"#size " %1, %2\n\t"						\
+	"clr	%0\n"							\
+"2:\n\n\t"								\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"b	2b\n\t"							\
+	" mov	%3, %0\n\t"						\
+        ".previous\n\n\t"						\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\t"						\
+	".previous\n\n\t"						\
+       : "=&r" (ret) : "r" (x), "m" (*__m(addr)),			\
+	 "i" (-EFAULT))
+
+extern int __put_user_bad(void);
+
+#define __get_user_check(x,addr,size,type) ({ \
+register int __gu_ret; \
+register unsigned long __gu_val; \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
+case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
+case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \
+case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \
+default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
+} } else { __gu_val = 0; __gu_ret = -EFAULT; } x = (type) __gu_val; __gu_ret; })
+
+#define __get_user_check_ret(x,addr,size,type,retval) ({ \
+register unsigned long __gu_val __asm__ ("l1"); \
+if (__access_ok(addr,size)) { \
+switch (size) { \
+case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
+case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
+case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \
+case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \
+default: if (__get_user_bad()) return retval; \
+} x = (type) __gu_val; } else return retval; })
+
+#define __get_user_nocheck(x,addr,size,type) ({ \
+register int __gu_ret; \
+register unsigned long __gu_val; \
+switch (size) { \
+case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
+case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
+case 4: __get_user_asm(__gu_val,,addr,__gu_ret); break; \
+case 8: __get_user_asm(__gu_val,d,addr,__gu_ret); break; \
+default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
+} x = (type) __gu_val; __gu_ret; })
+
+#define __get_user_nocheck_ret(x,addr,size,type,retval) ({ \
+register unsigned long __gu_val __asm__ ("l1"); \
+switch (size) { \
+case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
+case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
+case 4: __get_user_asm_ret(__gu_val,,addr,retval); break; \
+case 8: __get_user_asm_ret(__gu_val,d,addr,retval); break; \
+default: if (__get_user_bad()) return retval; \
+} x = (type) __gu_val; })
+
+#define __get_user_asm(x,size,addr,ret)					\
+__asm__ __volatile__(							\
+	"/* Get user asm, inline. */\n"					\
+"1:\t"	"ld"#size " %2, %1\n\t"						\
+	"clr	%0\n"							\
+"2:\n\n\t"								\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"clr	%1\n\t"							\
+	"b	2b\n\t"							\
+	" mov	%3, %0\n\n\t"						\
+	".previous\n\t"							\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\t"							\
+       : "=&r" (ret), "=&r" (x) : "m" (*__m(addr)),			\
+	 "i" (-EFAULT))
+
+#define __get_user_asm_ret(x,size,addr,retval)				\
+if (__builtin_constant_p(retval) && retval == -EFAULT)			\
+__asm__ __volatile__(							\
+	"/* Get user asm ret, inline. */\n"				\
+"1:\t"	"ld"#size " %1, %0\n\n\t"					\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b,__ret_efault\n\n\t"					\
+	".previous\n\t"							\
+       : "=&r" (x) : "m" (*__m(addr)));					\
+else									\
+__asm__ __volatile__(							\
+	"/* Get user asm ret, inline. */\n"				\
+"1:\t"	"ld"#size " %1, %0\n\n\t"					\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"ret\n\t"							\
+	" restore %%g0, %2, %%o0\n\n\t"					\
+	".previous\n\t"							\
+	".section __ex_table,#alloc\n\t"				\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\t"							\
+       : "=&r" (x) : "m" (*__m(addr)), "i" (retval))
+
+extern int __get_user_bad(void);
+
+extern unsigned long __copy_user(void __user *to, const void __user *from, unsigned long size);
+
+static inline unsigned long copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	if (n && __access_ok((unsigned long) to, n))
+		return __copy_user(to, (__force void __user *) from, n);
+	else
+		return n;
+}
+
+static inline unsigned long __copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+	return __copy_user(to, (__force void __user *) from, n);
+}
+
+static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	if (n && __access_ok((unsigned long) from, n))
+		return __copy_user((__force void __user *) to, from, n);
+	else
+		return n;
+}
+
+static inline unsigned long __copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+	return __copy_user((__force void __user *) to, from, n);
+}
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+static inline unsigned long __clear_user(void __user *addr, unsigned long size)
+{
+	unsigned long ret;
+
+	__asm__ __volatile__ (
+		".section __ex_table,#alloc\n\t"
+		".align 4\n\t"
+		".word 1f,3\n\t"
+		".previous\n\t"
+		"mov %2, %%o1\n"
+		"1:\n\t"
+		"call __bzero\n\t"
+		" mov %1, %%o0\n\t"
+		"mov %%o0, %0\n"
+		: "=r" (ret) : "r" (addr), "r" (size) :
+		"o0", "o1", "o2", "o3", "o4", "o5", "o7",
+		"g1", "g2", "g3", "g4", "g5", "g7", "cc");
+
+	return ret;
+}
+
+static inline unsigned long clear_user(void __user *addr, unsigned long n)
+{
+	if (n && __access_ok((unsigned long) addr, n))
+		return __clear_user(addr, n);
+	else
+		return n;
+}
+
+extern long __strncpy_from_user(char *dest, const char __user *src, long count);
+
+static inline long strncpy_from_user(char *dest, const char __user *src, long count)
+{
+	if (__access_ok((unsigned long) src, count))
+		return __strncpy_from_user(dest, src, count);
+	else
+		return -EFAULT;
+}
+
+extern long __strlen_user(const char __user *);
+extern long __strnlen_user(const char __user *, long len);
+
+static inline long strlen_user(const char __user *str)
+{
+	if (!access_ok(VERIFY_READ, str, 0))
+		return 0;
+	else
+		return __strlen_user(str);
+}
+
+static inline long strnlen_user(const char __user *str, long len)
+{
+	if (!access_ok(VERIFY_READ, str, 0))
+		return 0;
+	else
+		return __strnlen_user(str, len);
+}
+
+#endif  /* __ASSEMBLY__ */
+
+#endif /* _ASM_UACCESS_H */
diff --git a/arch/sparc/include/asm/uaccess_64.h b/arch/sparc/include/asm/uaccess_64.h
new file mode 100644
index 000000000000..296ef30e05c8
--- /dev/null
+++ b/arch/sparc/include/asm/uaccess_64.h
@@ -0,0 +1,273 @@
+#ifndef _ASM_UACCESS_H
+#define _ASM_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+
+#ifdef __KERNEL__
+#include <linux/compiler.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <asm/asi.h>
+#include <asm/system.h>
+#include <asm/spitfire.h>
+#include <asm-generic/uaccess.h>
+#endif
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Sparc64 is segmented, though more like the M68K than the I386.
+ * We use the secondary ASI to address user memory, which references a
+ * completely different VM map, thus there is zero chance of the user
+ * doing something queer and tricking us into poking kernel memory.
+ *
+ * What is left here is basically what is needed for the other parts of
+ * the kernel that expect to be able to manipulate, erum, "segments".
+ * Or perhaps more properly, permissions.
+ *
+ * "For historical reasons, these macros are grossly misnamed." -Linus
+ */
+
+#define KERNEL_DS   ((mm_segment_t) { ASI_P })
+#define USER_DS     ((mm_segment_t) { ASI_AIUS })	/* har har har */
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+#define get_fs() ((mm_segment_t) { get_thread_current_ds() })
+#define get_ds() (KERNEL_DS)
+
+#define segment_eq(a,b)  ((a).seg == (b).seg)
+
+#define set_fs(val)								\
+do {										\
+	set_thread_current_ds((val).seg);					\
+	__asm__ __volatile__ ("wr %%g0, %0, %%asi" : : "r" ((val).seg));	\
+} while(0)
+
+static inline int __access_ok(const void __user * addr, unsigned long size)
+{
+	return 1;
+}
+
+static inline int access_ok(int type, const void __user * addr, unsigned long size)
+{
+	return 1;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+        unsigned int insn, fixup;
+};
+
+extern void __ret_efault(void);
+extern void __retl_efault(void);
+
+/* Uh, these should become the main single-value transfer routines..
+ * They automatically use the right size if we just have the right
+ * pointer type..
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ */
+#define put_user(x,ptr) ({ \
+unsigned long __pu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__put_user_nocheck((__typeof__(*(ptr)))(x),__pu_addr,sizeof(*(ptr))); })
+
+#define get_user(x,ptr) ({ \
+unsigned long __gu_addr = (unsigned long)(ptr); \
+__chk_user_ptr(ptr); \
+__get_user_nocheck((x),__gu_addr,sizeof(*(ptr)),__typeof__(*(ptr))); })
+
+#define __put_user(x,ptr) put_user(x,ptr)
+#define __get_user(x,ptr) get_user(x,ptr)
+
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) ((struct __large_struct *)(x))
+
+#define __put_user_nocheck(data,addr,size) ({ \
+register int __pu_ret; \
+switch (size) { \
+case 1: __put_user_asm(data,b,addr,__pu_ret); break; \
+case 2: __put_user_asm(data,h,addr,__pu_ret); break; \
+case 4: __put_user_asm(data,w,addr,__pu_ret); break; \
+case 8: __put_user_asm(data,x,addr,__pu_ret); break; \
+default: __pu_ret = __put_user_bad(); break; \
+} __pu_ret; })
+
+#define __put_user_asm(x,size,addr,ret)					\
+__asm__ __volatile__(							\
+	"/* Put user asm, inline. */\n"					\
+"1:\t"	"st"#size "a %1, [%2] %%asi\n\t"				\
+	"clr	%0\n"							\
+"2:\n\n\t"								\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"sethi	%%hi(2b), %0\n\t"					\
+	"jmpl	%0 + %%lo(2b), %%g0\n\t"				\
+	" mov	%3, %0\n\n\t"						\
+	".previous\n\t"							\
+	".section __ex_table,\"a\"\n\t"					\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\t"						\
+	".previous\n\n\t"						\
+       : "=r" (ret) : "r" (x), "r" (__m(addr)),				\
+	 "i" (-EFAULT))
+
+extern int __put_user_bad(void);
+
+#define __get_user_nocheck(data,addr,size,type) ({ \
+register int __gu_ret; \
+register unsigned long __gu_val; \
+switch (size) { \
+case 1: __get_user_asm(__gu_val,ub,addr,__gu_ret); break; \
+case 2: __get_user_asm(__gu_val,uh,addr,__gu_ret); break; \
+case 4: __get_user_asm(__gu_val,uw,addr,__gu_ret); break; \
+case 8: __get_user_asm(__gu_val,x,addr,__gu_ret); break; \
+default: __gu_val = 0; __gu_ret = __get_user_bad(); break; \
+} data = (type) __gu_val; __gu_ret; })
+
+#define __get_user_nocheck_ret(data,addr,size,type,retval) ({ \
+register unsigned long __gu_val __asm__ ("l1"); \
+switch (size) { \
+case 1: __get_user_asm_ret(__gu_val,ub,addr,retval); break; \
+case 2: __get_user_asm_ret(__gu_val,uh,addr,retval); break; \
+case 4: __get_user_asm_ret(__gu_val,uw,addr,retval); break; \
+case 8: __get_user_asm_ret(__gu_val,x,addr,retval); break; \
+default: if (__get_user_bad()) return retval; \
+} data = (type) __gu_val; })
+
+#define __get_user_asm(x,size,addr,ret)					\
+__asm__ __volatile__(							\
+	"/* Get user asm, inline. */\n"					\
+"1:\t"	"ld"#size "a [%2] %%asi, %1\n\t"				\
+	"clr	%0\n"							\
+"2:\n\n\t"								\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"sethi	%%hi(2b), %0\n\t"					\
+	"clr	%1\n\t"							\
+	"jmpl	%0 + %%lo(2b), %%g0\n\t"				\
+	" mov	%3, %0\n\n\t"						\
+	".previous\n\t"							\
+	".section __ex_table,\"a\"\n\t"					\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\t"							\
+       : "=r" (ret), "=r" (x) : "r" (__m(addr)),			\
+	 "i" (-EFAULT))
+
+#define __get_user_asm_ret(x,size,addr,retval)				\
+if (__builtin_constant_p(retval) && retval == -EFAULT)			\
+__asm__ __volatile__(							\
+	"/* Get user asm ret, inline. */\n"				\
+"1:\t"	"ld"#size "a [%1] %%asi, %0\n\n\t"				\
+	".section __ex_table,\"a\"\n\t"					\
+	".align	4\n\t"							\
+	".word	1b,__ret_efault\n\n\t"					\
+	".previous\n\t"							\
+       : "=r" (x) : "r" (__m(addr)));					\
+else									\
+__asm__ __volatile__(							\
+	"/* Get user asm ret, inline. */\n"				\
+"1:\t"	"ld"#size "a [%1] %%asi, %0\n\n\t"				\
+	".section .fixup,#alloc,#execinstr\n\t"				\
+	".align	4\n"							\
+"3:\n\t"								\
+	"ret\n\t"							\
+	" restore %%g0, %2, %%o0\n\n\t"					\
+	".previous\n\t"							\
+	".section __ex_table,\"a\"\n\t"					\
+	".align	4\n\t"							\
+	".word	1b, 3b\n\n\t"						\
+	".previous\n\t"							\
+       : "=r" (x) : "r" (__m(addr)), "i" (retval))
+
+extern int __get_user_bad(void);
+
+extern unsigned long __must_check ___copy_from_user(void *to,
+						    const void __user *from,
+						    unsigned long size);
+extern unsigned long copy_from_user_fixup(void *to, const void __user *from,
+					  unsigned long size);
+static inline unsigned long __must_check
+copy_from_user(void *to, const void __user *from, unsigned long size)
+{
+	unsigned long ret = ___copy_from_user(to, from, size);
+
+	if (unlikely(ret))
+		ret = copy_from_user_fixup(to, from, size);
+	return ret;
+}
+#define __copy_from_user copy_from_user
+
+extern unsigned long __must_check ___copy_to_user(void __user *to,
+						  const void *from,
+						  unsigned long size);
+extern unsigned long copy_to_user_fixup(void __user *to, const void *from,
+					unsigned long size);
+static inline unsigned long __must_check
+copy_to_user(void __user *to, const void *from, unsigned long size)
+{
+	unsigned long ret = ___copy_to_user(to, from, size);
+
+	if (unlikely(ret))
+		ret = copy_to_user_fixup(to, from, size);
+	return ret;
+}
+#define __copy_to_user copy_to_user
+
+extern unsigned long __must_check ___copy_in_user(void __user *to,
+						  const void __user *from,
+						  unsigned long size);
+extern unsigned long copy_in_user_fixup(void __user *to, void __user *from,
+					unsigned long size);
+static inline unsigned long __must_check
+copy_in_user(void __user *to, void __user *from, unsigned long size)
+{
+	unsigned long ret = ___copy_in_user(to, from, size);
+
+	if (unlikely(ret))
+		ret = copy_in_user_fixup(to, from, size);
+	return ret;
+}
+#define __copy_in_user copy_in_user
+
+extern unsigned long __must_check __clear_user(void __user *, unsigned long);
+
+#define clear_user __clear_user
+
+extern long __must_check __strncpy_from_user(char *dest, const char __user *src, long count);
+
+#define strncpy_from_user __strncpy_from_user
+
+extern long __strlen_user(const char __user *);
+extern long __strnlen_user(const char __user *, long len);
+
+#define strlen_user __strlen_user
+#define strnlen_user __strnlen_user
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#endif  /* __ASSEMBLY__ */
+
+#endif /* _ASM_UACCESS_H */
diff --git a/arch/sparc/include/asm/uctx.h b/arch/sparc/include/asm/uctx.h
new file mode 100644
index 000000000000..dc937c75ffdd
--- /dev/null
+++ b/arch/sparc/include/asm/uctx.h
@@ -0,0 +1,71 @@
+/*
+ * uctx.h: Sparc64 {set,get}context() register state layouts.
+ *
+ * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC64_UCTX_H
+#define __SPARC64_UCTX_H
+
+#define MC_TSTATE	0
+#define MC_PC		1
+#define MC_NPC		2
+#define MC_Y		3
+#define MC_G1		4
+#define MC_G2		5
+#define MC_G3		6
+#define MC_G4		7
+#define MC_G5		8
+#define MC_G6		9
+#define MC_G7		10
+#define MC_O0		11
+#define MC_O1		12
+#define MC_O2		13
+#define MC_O3		14
+#define MC_O4		15
+#define MC_O5		16
+#define MC_O6		17
+#define MC_O7		18
+#define MC_NGREG	19
+
+typedef unsigned long mc_greg_t;
+typedef mc_greg_t mc_gregset_t[MC_NGREG];
+
+#define MC_MAXFPQ	16
+struct mc_fq {
+	unsigned long	*mcfq_addr;
+	unsigned int	mcfq_insn;
+};
+
+struct mc_fpu {
+	union {
+		unsigned int	sregs[32];
+		unsigned long	dregs[32];
+		long double	qregs[16];
+	} mcfpu_fregs;
+	unsigned long	mcfpu_fsr;
+	unsigned long	mcfpu_fprs;
+	unsigned long	mcfpu_gsr;
+	struct mc_fq	*mcfpu_fq;
+	unsigned char	mcfpu_qcnt;
+	unsigned char	mcfpu_qentsz;
+	unsigned char	mcfpu_enab;
+};
+typedef struct mc_fpu mc_fpu_t;
+
+typedef struct {
+	mc_gregset_t	mc_gregs;
+	mc_greg_t	mc_fp;
+	mc_greg_t	mc_i7;
+	mc_fpu_t	mc_fpregs;
+} mcontext_t;
+
+struct ucontext {
+	struct ucontext		*uc_link;
+	unsigned long		uc_flags;
+	sigset_t		uc_sigmask;
+	mcontext_t		uc_mcontext;
+};
+typedef struct ucontext ucontext_t;
+
+#endif /* __SPARC64_UCTX_H */
diff --git a/arch/sparc/include/asm/unaligned.h b/arch/sparc/include/asm/unaligned.h
new file mode 100644
index 000000000000..11d2d5fb5902
--- /dev/null
+++ b/arch/sparc/include/asm/unaligned.h
@@ -0,0 +1,10 @@
+#ifndef _ASM_SPARC_UNALIGNED_H
+#define _ASM_SPARC_UNALIGNED_H
+
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+#define get_unaligned	__get_unaligned_be
+#define put_unaligned	__put_unaligned_be
+
+#endif /* _ASM_SPARC_UNALIGNED_H */
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
new file mode 100644
index 000000000000..4207fb362da0
--- /dev/null
+++ b/arch/sparc/include/asm/unistd.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_UNISTD_H
+#define ___ASM_SPARC_UNISTD_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/unistd_64.h>
+#else
+#include <asm/unistd_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/unistd_32.h b/arch/sparc/include/asm/unistd_32.h
new file mode 100644
index 000000000000..648643a9f139
--- /dev/null
+++ b/arch/sparc/include/asm/unistd_32.h
@@ -0,0 +1,384 @@
+#ifndef _SPARC_UNISTD_H
+#define _SPARC_UNISTD_H
+
+/*
+ * System calls under the Sparc.
+ *
+ * Don't be scared by the ugly clobbers, it is the only way I can
+ * think of right now to force the arguments into fixed registers
+ * before the trap into the system call with gcc 'asm' statements.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ *
+ * SunOS compatibility based upon preliminary work which is:
+ *
+ * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
+ */
+
+#define __NR_restart_syscall      0 /* Linux Specific				   */
+#define __NR_exit                 1 /* Common                                      */
+#define __NR_fork                 2 /* Common                                      */
+#define __NR_read                 3 /* Common                                      */
+#define __NR_write                4 /* Common                                      */
+#define __NR_open                 5 /* Common                                      */
+#define __NR_close                6 /* Common                                      */
+#define __NR_wait4                7 /* Common                                      */
+#define __NR_creat                8 /* Common                                      */
+#define __NR_link                 9 /* Common                                      */
+#define __NR_unlink              10 /* Common                                      */
+#define __NR_execv               11 /* SunOS Specific                              */
+#define __NR_chdir               12 /* Common                                      */
+#define __NR_chown		 13 /* Common					   */
+#define __NR_mknod               14 /* Common                                      */
+#define __NR_chmod               15 /* Common                                      */
+#define __NR_lchown              16 /* Common                                      */
+#define __NR_brk                 17 /* Common                                      */
+#define __NR_perfctr             18 /* Performance counter operations              */
+#define __NR_lseek               19 /* Common                                      */
+#define __NR_getpid              20 /* Common                                      */
+#define __NR_capget		 21 /* Linux Specific				   */
+#define __NR_capset		 22 /* Linux Specific				   */
+#define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
+#define __NR_getuid              24 /* Common                                      */
+#define __NR_vmsplice	         25 /* ENOSYS under SunOS			   */
+#define __NR_ptrace              26 /* Common                                      */
+#define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
+#define __NR_sigaltstack	 28 /* Common					   */
+#define __NR_pause               29 /* Is sigblock(0)->sigpause() in SunOS         */
+#define __NR_utime               30 /* Implemented via utimes() under SunOS        */
+#define __NR_lchown32            31 /* Linux sparc32 specific                      */
+#define __NR_fchown32            32 /* Linux sparc32 specific                      */
+#define __NR_access              33 /* Common                                      */
+#define __NR_nice                34 /* Implemented via get/setpriority() in SunOS  */
+#define __NR_chown32             35 /* Linux sparc32 specific                      */
+#define __NR_sync                36 /* Common                                      */
+#define __NR_kill                37 /* Common                                      */
+#define __NR_stat                38 /* Common                                      */
+#define __NR_sendfile		 39 /* Linux Specific				   */
+#define __NR_lstat               40 /* Common                                      */
+#define __NR_dup                 41 /* Common                                      */
+#define __NR_pipe                42 /* Common                                      */
+#define __NR_times               43 /* Implemented via getrusage() in SunOS        */
+#define __NR_getuid32            44 /* Linux sparc32 specific                      */
+#define __NR_umount2             45 /* Linux Specific                              */
+#define __NR_setgid              46 /* Implemented via setregid() in SunOS         */
+#define __NR_getgid              47 /* Common                                      */
+#define __NR_signal              48 /* Implemented via sigvec() in SunOS           */
+#define __NR_geteuid             49 /* SunOS calls getuid()                        */
+#define __NR_getegid             50 /* SunOS calls getgid()                        */
+#define __NR_acct                51 /* Common                                      */
+/* #define __NR_memory_ordering  52    Linux sparc64 specific			   */
+#define __NR_getgid32            53 /* Linux sparc32 specific                      */
+#define __NR_ioctl               54 /* Common                                      */
+#define __NR_reboot              55 /* Common                                      */
+#define __NR_mmap2		 56 /* Linux sparc32 Specific			   */
+#define __NR_symlink             57 /* Common                                      */
+#define __NR_readlink            58 /* Common                                      */
+#define __NR_execve              59 /* Common                                      */
+#define __NR_umask               60 /* Common                                      */
+#define __NR_chroot              61 /* Common                                      */
+#define __NR_fstat               62 /* Common                                      */
+#define __NR_fstat64		 63 /* Linux Specific			           */
+#define __NR_getpagesize         64 /* Common                                      */
+#define __NR_msync               65 /* Common in newer 1.3.x revs...               */
+#define __NR_vfork               66 /* Common                                      */
+#define __NR_pread64             67 /* Linux Specific                              */
+#define __NR_pwrite64            68 /* Linux Specific                              */
+#define __NR_geteuid32           69 /* Linux sparc32, sbrk under SunOS             */
+#define __NR_getegid32           70 /* Linux sparc32, sstk under SunOS             */
+#define __NR_mmap                71 /* Common                                      */
+#define __NR_setreuid32          72 /* Linux sparc32, vadvise under SunOS          */
+#define __NR_munmap              73 /* Common                                      */
+#define __NR_mprotect            74 /* Common                                      */
+#define __NR_madvise             75 /* Common                                      */
+#define __NR_vhangup             76 /* Common                                      */
+#define __NR_truncate64		 77 /* Linux sparc32 Specific			   */
+#define __NR_mincore             78 /* Common                                      */
+#define __NR_getgroups           79 /* Common                                      */
+#define __NR_setgroups           80 /* Common                                      */
+#define __NR_getpgrp             81 /* Common                                      */
+#define __NR_setgroups32         82 /* Linux sparc32, setpgrp under SunOS          */
+#define __NR_setitimer           83 /* Common                                      */
+#define __NR_ftruncate64	 84 /* Linux sparc32 Specific			   */
+#define __NR_swapon              85 /* Common                                      */
+#define __NR_getitimer           86 /* Common                                      */
+#define __NR_setuid32            87 /* Linux sparc32, gethostname under SunOS      */
+#define __NR_sethostname         88 /* Common                                      */
+#define __NR_setgid32            89 /* Linux sparc32, getdtablesize under SunOS    */
+#define __NR_dup2                90 /* Common                                      */
+#define __NR_setfsuid32          91 /* Linux sparc32, getdopt under SunOS          */
+#define __NR_fcntl               92 /* Common                                      */
+#define __NR_select              93 /* Common                                      */
+#define __NR_setfsgid32          94 /* Linux sparc32, setdopt under SunOS          */
+#define __NR_fsync               95 /* Common                                      */
+#define __NR_setpriority         96 /* Common                                      */
+#define __NR_socket              97 /* Common                                      */
+#define __NR_connect             98 /* Common                                      */
+#define __NR_accept              99 /* Common                                      */
+#define __NR_getpriority        100 /* Common                                      */
+#define __NR_rt_sigreturn       101 /* Linux Specific                              */
+#define __NR_rt_sigaction       102 /* Linux Specific                              */
+#define __NR_rt_sigprocmask     103 /* Linux Specific                              */
+#define __NR_rt_sigpending      104 /* Linux Specific                              */
+#define __NR_rt_sigtimedwait    105 /* Linux Specific                              */
+#define __NR_rt_sigqueueinfo    106 /* Linux Specific                              */
+#define __NR_rt_sigsuspend      107 /* Linux Specific                              */
+#define __NR_setresuid32        108 /* Linux Specific, sigvec under SunOS	   */
+#define __NR_getresuid32        109 /* Linux Specific, sigblock under SunOS	   */
+#define __NR_setresgid32        110 /* Linux Specific, sigsetmask under SunOS	   */
+#define __NR_getresgid32        111 /* Linux Specific, sigpause under SunOS	   */
+#define __NR_setregid32         112 /* Linux sparc32, sigstack under SunOS         */
+#define __NR_recvmsg            113 /* Common                                      */
+#define __NR_sendmsg            114 /* Common                                      */
+#define __NR_getgroups32        115 /* Linux sparc32, vtrace under SunOS           */
+#define __NR_gettimeofday       116 /* Common                                      */
+#define __NR_getrusage          117 /* Common                                      */
+#define __NR_getsockopt         118 /* Common                                      */
+#define __NR_getcwd		119 /* Linux Specific				   */
+#define __NR_readv              120 /* Common                                      */
+#define __NR_writev             121 /* Common                                      */
+#define __NR_settimeofday       122 /* Common                                      */
+#define __NR_fchown             123 /* Common                                      */
+#define __NR_fchmod             124 /* Common                                      */
+#define __NR_recvfrom           125 /* Common                                      */
+#define __NR_setreuid           126 /* Common                                      */
+#define __NR_setregid           127 /* Common                                      */
+#define __NR_rename             128 /* Common                                      */
+#define __NR_truncate           129 /* Common                                      */
+#define __NR_ftruncate          130 /* Common                                      */
+#define __NR_flock              131 /* Common                                      */
+#define __NR_lstat64		132 /* Linux Specific			           */
+#define __NR_sendto             133 /* Common                                      */
+#define __NR_shutdown           134 /* Common                                      */
+#define __NR_socketpair         135 /* Common                                      */
+#define __NR_mkdir              136 /* Common                                      */
+#define __NR_rmdir              137 /* Common                                      */
+#define __NR_utimes             138 /* SunOS Specific                              */
+#define __NR_stat64		139 /* Linux Specific			           */
+#define __NR_sendfile64         140 /* adjtime under SunOS                         */
+#define __NR_getpeername        141 /* Common                                      */
+#define __NR_futex              142 /* gethostid under SunOS                       */
+#define __NR_gettid             143 /* ENOSYS under SunOS                          */
+#define __NR_getrlimit          144 /* Common                                      */
+#define __NR_setrlimit          145 /* Common                                      */
+#define __NR_pivot_root		146 /* Linux Specific, killpg under SunOS          */
+#define __NR_prctl		147 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_read	148 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_write	149 /* ENOSYS under SunOS                          */
+#define __NR_getsockname        150 /* Common                                      */
+#define __NR_inotify_init       151 /* Linux specific                              */
+#define __NR_inotify_add_watch  152 /* Linux specific                              */
+#define __NR_poll               153 /* Common                                      */
+#define __NR_getdents64		154 /* Linux specific				   */
+#define __NR_fcntl64		155 /* Linux sparc32 Specific                      */
+#define __NR_inotify_rm_watch   156 /* Linux specific				   */
+#define __NR_statfs             157 /* Common                                      */
+#define __NR_fstatfs            158 /* Common                                      */
+#define __NR_umount             159 /* Common                                      */
+#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS    */
+#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS           */
+#define __NR_getdomainname      162 /* SunOS Specific                              */
+#define __NR_setdomainname      163 /* Common                                      */
+/* #define __NR_utrap_install   164    Linux sparc64 specific			   */
+#define __NR_quotactl           165 /* Common                                      */
+#define __NR_set_tid_address    166 /* Linux specific, exportfs under SunOS        */
+#define __NR_mount              167 /* Common                                      */
+#define __NR_ustat              168 /* Common                                      */
+#define __NR_setxattr           169 /* SunOS: semsys                               */
+#define __NR_lsetxattr          170 /* SunOS: msgsys                               */
+#define __NR_fsetxattr          171 /* SunOS: shmsys                               */
+#define __NR_getxattr           172 /* SunOS: auditsys                             */
+#define __NR_lgetxattr          173 /* SunOS: rfssys                               */
+#define __NR_getdents           174 /* Common                                      */
+#define __NR_setsid             175 /* Common                                      */
+#define __NR_fchdir             176 /* Common                                      */
+#define __NR_fgetxattr          177 /* SunOS: fchroot                              */
+#define __NR_listxattr          178 /* SunOS: vpixsys                              */
+#define __NR_llistxattr         179 /* SunOS: aioread                              */
+#define __NR_flistxattr         180 /* SunOS: aiowrite                             */
+#define __NR_removexattr        181 /* SunOS: aiowait                              */
+#define __NR_lremovexattr       182 /* SunOS: aiocancel                            */
+#define __NR_sigpending         183 /* Common                                      */
+#define __NR_query_module	184 /* Linux Specific				   */
+#define __NR_setpgid            185 /* Common                                      */
+#define __NR_fremovexattr       186 /* SunOS: pathconf                             */
+#define __NR_tkill              187 /* SunOS: fpathconf                            */
+#define __NR_exit_group		188 /* Linux specific, sysconf undef SunOS         */
+#define __NR_uname              189 /* Linux Specific                              */
+#define __NR_init_module        190 /* Linux Specific                              */
+#define __NR_personality        191 /* Linux Specific                              */
+#define __NR_remap_file_pages   192 /* Linux Specific                              */
+#define __NR_epoll_create       193 /* Linux Specific                              */
+#define __NR_epoll_ctl          194 /* Linux Specific                              */
+#define __NR_epoll_wait         195 /* Linux Specific                              */
+#define __NR_ioprio_set         196 /* Linux Specific                              */
+#define __NR_getppid            197 /* Linux Specific                              */
+#define __NR_sigaction          198 /* Linux Specific                              */
+#define __NR_sgetmask           199 /* Linux Specific                              */
+#define __NR_ssetmask           200 /* Linux Specific                              */
+#define __NR_sigsuspend         201 /* Linux Specific                              */
+#define __NR_oldlstat           202 /* Linux Specific                              */
+#define __NR_uselib             203 /* Linux Specific                              */
+#define __NR_readdir            204 /* Linux Specific                              */
+#define __NR_readahead          205 /* Linux Specific                              */
+#define __NR_socketcall         206 /* Linux Specific                              */
+#define __NR_syslog             207 /* Linux Specific                              */
+#define __NR_lookup_dcookie     208 /* Linux Specific                              */
+#define __NR_fadvise64          209 /* Linux Specific                              */
+#define __NR_fadvise64_64       210 /* Linux Specific                              */
+#define __NR_tgkill             211 /* Linux Specific                              */
+#define __NR_waitpid            212 /* Linux Specific                              */
+#define __NR_swapoff            213 /* Linux Specific                              */
+#define __NR_sysinfo            214 /* Linux Specific                              */
+#define __NR_ipc                215 /* Linux Specific                              */
+#define __NR_sigreturn          216 /* Linux Specific                              */
+#define __NR_clone              217 /* Linux Specific                              */
+#define __NR_ioprio_get         218 /* Linux Specific                              */
+#define __NR_adjtimex           219 /* Linux Specific                              */
+#define __NR_sigprocmask        220 /* Linux Specific                              */
+#define __NR_create_module      221 /* Linux Specific                              */
+#define __NR_delete_module      222 /* Linux Specific                              */
+#define __NR_get_kernel_syms    223 /* Linux Specific                              */
+#define __NR_getpgid            224 /* Linux Specific                              */
+#define __NR_bdflush            225 /* Linux Specific                              */
+#define __NR_sysfs              226 /* Linux Specific                              */
+#define __NR_afs_syscall        227 /* Linux Specific                              */
+#define __NR_setfsuid           228 /* Linux Specific                              */
+#define __NR_setfsgid           229 /* Linux Specific                              */
+#define __NR__newselect         230 /* Linux Specific                              */
+#define __NR_time               231 /* Linux Specific                              */
+#define __NR_splice             232 /* Linux Specific                              */
+#define __NR_stime              233 /* Linux Specific                              */
+#define __NR_statfs64           234 /* Linux Specific                              */
+#define __NR_fstatfs64          235 /* Linux Specific                              */
+#define __NR__llseek            236 /* Linux Specific                              */
+#define __NR_mlock              237
+#define __NR_munlock            238
+#define __NR_mlockall           239
+#define __NR_munlockall         240
+#define __NR_sched_setparam     241
+#define __NR_sched_getparam     242
+#define __NR_sched_setscheduler 243
+#define __NR_sched_getscheduler 244
+#define __NR_sched_yield        245
+#define __NR_sched_get_priority_max 246
+#define __NR_sched_get_priority_min 247
+#define __NR_sched_rr_get_interval  248
+#define __NR_nanosleep          249
+#define __NR_mremap             250
+#define __NR__sysctl            251
+#define __NR_getsid             252
+#define __NR_fdatasync          253
+#define __NR_nfsservctl         254
+#define __NR_sync_file_range	255
+#define __NR_clock_settime	256
+#define __NR_clock_gettime	257
+#define __NR_clock_getres	258
+#define __NR_clock_nanosleep	259
+#define __NR_sched_getaffinity	260
+#define __NR_sched_setaffinity	261
+#define __NR_timer_settime	262
+#define __NR_timer_gettime	263
+#define __NR_timer_getoverrun	264
+#define __NR_timer_delete	265
+#define __NR_timer_create	266
+/* #define __NR_vserver		267 Reserved for VSERVER */
+#define __NR_io_setup		268
+#define __NR_io_destroy		269
+#define __NR_io_submit		270
+#define __NR_io_cancel		271
+#define __NR_io_getevents	272
+#define __NR_mq_open		273
+#define __NR_mq_unlink		274
+#define __NR_mq_timedsend	275
+#define __NR_mq_timedreceive	276
+#define __NR_mq_notify		277
+#define __NR_mq_getsetattr	278
+#define __NR_waitid		279
+#define __NR_tee		280
+#define __NR_add_key		281
+#define __NR_request_key	282
+#define __NR_keyctl		283
+#define __NR_openat		284
+#define __NR_mkdirat		285
+#define __NR_mknodat		286
+#define __NR_fchownat		287
+#define __NR_futimesat		288
+#define __NR_fstatat64		289
+#define __NR_unlinkat		290
+#define __NR_renameat		291
+#define __NR_linkat		292
+#define __NR_symlinkat		293
+#define __NR_readlinkat		294
+#define __NR_fchmodat		295
+#define __NR_faccessat		296
+#define __NR_pselect6		297
+#define __NR_ppoll		298
+#define __NR_unshare		299
+#define __NR_set_robust_list	300
+#define __NR_get_robust_list	301
+#define __NR_migrate_pages	302
+#define __NR_mbind		303
+#define __NR_get_mempolicy	304
+#define __NR_set_mempolicy	305
+#define __NR_kexec_load		306
+#define __NR_move_pages		307
+#define __NR_getcpu		308
+#define __NR_epoll_pwait	309
+#define __NR_utimensat		310
+#define __NR_signalfd		311
+#define __NR_timerfd_create	312
+#define __NR_eventfd		313
+#define __NR_fallocate		314
+#define __NR_timerfd_settime	315
+#define __NR_timerfd_gettime	316
+#define __NR_signalfd4		317
+#define __NR_eventfd2		318
+#define __NR_epoll_create1	319
+#define __NR_dup3		320
+#define __NR_pipe2		321
+#define __NR_inotify_init1	322
+
+#define NR_SYSCALLS		323
+
+/* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
+ * it never had the plain ones and there is no value to adding those
+ * old versions into the syscall table.
+ */
+#define __IGNORE_setresuid
+#define __IGNORE_getresuid
+#define __IGNORE_setresgid
+#define __IGNORE_getresgid
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _SPARC_UNISTD_H */
diff --git a/arch/sparc/include/asm/unistd_64.h b/arch/sparc/include/asm/unistd_64.h
new file mode 100644
index 000000000000..c5cc0e052321
--- /dev/null
+++ b/arch/sparc/include/asm/unistd_64.h
@@ -0,0 +1,379 @@
+#ifndef _SPARC64_UNISTD_H
+#define _SPARC64_UNISTD_H
+
+/*
+ * System calls under the Sparc.
+ *
+ * Don't be scared by the ugly clobbers, it is the only way I can
+ * think of right now to force the arguments into fixed registers
+ * before the trap into the system call with gcc 'asm' statements.
+ *
+ * Copyright (C) 1995, 2007 David S. Miller (davem@davemloft.net)
+ *
+ * SunOS compatibility based upon preliminary work which is:
+ *
+ * Copyright (C) 1995 Adrian M. Rodriguez (adrian@remus.rutgers.edu)
+ */
+
+#define __NR_restart_syscall      0 /* Linux Specific				   */
+#define __NR_exit                 1 /* Common                                      */
+#define __NR_fork                 2 /* Common                                      */
+#define __NR_read                 3 /* Common                                      */
+#define __NR_write                4 /* Common                                      */
+#define __NR_open                 5 /* Common                                      */
+#define __NR_close                6 /* Common                                      */
+#define __NR_wait4                7 /* Common                                      */
+#define __NR_creat                8 /* Common                                      */
+#define __NR_link                 9 /* Common                                      */
+#define __NR_unlink              10 /* Common                                      */
+#define __NR_execv               11 /* SunOS Specific                              */
+#define __NR_chdir               12 /* Common                                      */
+#define __NR_chown		 13 /* Common					   */
+#define __NR_mknod               14 /* Common                                      */
+#define __NR_chmod               15 /* Common                                      */
+#define __NR_lchown              16 /* Common                                      */
+#define __NR_brk                 17 /* Common                                      */
+#define __NR_perfctr             18 /* Performance counter operations              */
+#define __NR_lseek               19 /* Common                                      */
+#define __NR_getpid              20 /* Common                                      */
+#define __NR_capget		 21 /* Linux Specific				   */
+#define __NR_capset		 22 /* Linux Specific				   */
+#define __NR_setuid              23 /* Implemented via setreuid in SunOS           */
+#define __NR_getuid              24 /* Common                                      */
+#define __NR_vmsplice	         25 /* ENOSYS under SunOS			   */
+#define __NR_ptrace              26 /* Common                                      */
+#define __NR_alarm               27 /* Implemented via setitimer in SunOS          */
+#define __NR_sigaltstack	 28 /* Common					   */
+#define __NR_pause               29 /* Is sigblock(0)->sigpause() in SunOS         */
+#define __NR_utime               30 /* Implemented via utimes() under SunOS        */
+/* #define __NR_lchown32         31    Linux sparc32 specific                      */
+/* #define __NR_fchown32         32    Linux sparc32 specific                      */
+#define __NR_access              33 /* Common                                      */
+#define __NR_nice                34 /* Implemented via get/setpriority() in SunOS  */
+/* #define __NR_chown32          35    Linux sparc32 specific                      */
+#define __NR_sync                36 /* Common                                      */
+#define __NR_kill                37 /* Common                                      */
+#define __NR_stat                38 /* Common                                      */
+#define __NR_sendfile		 39 /* Linux Specific				   */
+#define __NR_lstat               40 /* Common                                      */
+#define __NR_dup                 41 /* Common                                      */
+#define __NR_pipe                42 /* Common                                      */
+#define __NR_times               43 /* Implemented via getrusage() in SunOS        */
+/* #define __NR_getuid32         44    Linux sparc32 specific                      */
+#define __NR_umount2             45 /* Linux Specific                              */
+#define __NR_setgid              46 /* Implemented via setregid() in SunOS         */
+#define __NR_getgid              47 /* Common                                      */
+#define __NR_signal              48 /* Implemented via sigvec() in SunOS           */
+#define __NR_geteuid             49 /* SunOS calls getuid()                        */
+#define __NR_getegid             50 /* SunOS calls getgid()                        */
+#define __NR_acct                51 /* Common                                      */
+#define __NR_memory_ordering	 52 /* Linux Specific				   */
+/* #define __NR_getgid32         53    Linux sparc32 specific                      */
+#define __NR_ioctl               54 /* Common                                      */
+#define __NR_reboot              55 /* Common                                      */
+/* #define __NR_mmap2		 56    Linux sparc32 Specific                      */
+#define __NR_symlink             57 /* Common                                      */
+#define __NR_readlink            58 /* Common                                      */
+#define __NR_execve              59 /* Common                                      */
+#define __NR_umask               60 /* Common                                      */
+#define __NR_chroot              61 /* Common                                      */
+#define __NR_fstat               62 /* Common                                      */
+#define __NR_fstat64             63 /* Linux Specific                              */
+#define __NR_getpagesize         64 /* Common                                      */
+#define __NR_msync               65 /* Common in newer 1.3.x revs...               */
+#define __NR_vfork               66 /* Common                                      */
+#define __NR_pread64             67 /* Linux Specific                              */
+#define __NR_pwrite64            68 /* Linux Specific                              */
+/* #define __NR_geteuid32        69    Linux sparc32, sbrk under SunOS             */
+/* #define __NR_getegid32        70    Linux sparc32, sstk under SunOS             */
+#define __NR_mmap                71 /* Common                                      */
+/* #define __NR_setreuid32       72    Linux sparc32, vadvise under SunOS          */
+#define __NR_munmap              73 /* Common                                      */
+#define __NR_mprotect            74 /* Common                                      */
+#define __NR_madvise             75 /* Common                                      */
+#define __NR_vhangup             76 /* Common                                      */
+/* #define __NR_truncate64       77    Linux sparc32 Specific			   */
+#define __NR_mincore             78 /* Common                                      */
+#define __NR_getgroups           79 /* Common                                      */
+#define __NR_setgroups           80 /* Common                                      */
+#define __NR_getpgrp             81 /* Common                                      */
+/* #define __NR_setgroups32      82    Linux sparc32, setpgrp under SunOS          */
+#define __NR_setitimer           83 /* Common                                      */
+/* #define __NR_ftruncate64      84    Linux sparc32 Specific			   */
+#define __NR_swapon              85 /* Common                                      */
+#define __NR_getitimer           86 /* Common                                      */
+/* #define __NR_setuid32         87    Linux sparc32, gethostname under SunOS      */
+#define __NR_sethostname         88 /* Common                                      */
+/* #define __NR_setgid32         89    Linux sparc32, getdtablesize under SunOS    */
+#define __NR_dup2                90 /* Common                                      */
+/* #define __NR_setfsuid32       91    Linux sparc32, getdopt under SunOS          */
+#define __NR_fcntl               92 /* Common                                      */
+#define __NR_select              93 /* Common                                      */
+/* #define __NR_setfsgid32       94    Linux sparc32, setdopt under SunOS          */
+#define __NR_fsync               95 /* Common                                      */
+#define __NR_setpriority         96 /* Common                                      */
+#define __NR_socket              97 /* Common                                      */
+#define __NR_connect             98 /* Common                                      */
+#define __NR_accept              99 /* Common                                      */
+#define __NR_getpriority        100 /* Common                                      */
+#define __NR_rt_sigreturn       101 /* Linux Specific                              */
+#define __NR_rt_sigaction       102 /* Linux Specific                              */
+#define __NR_rt_sigprocmask     103 /* Linux Specific                              */
+#define __NR_rt_sigpending      104 /* Linux Specific                              */
+#define __NR_rt_sigtimedwait    105 /* Linux Specific                              */
+#define __NR_rt_sigqueueinfo    106 /* Linux Specific                              */
+#define __NR_rt_sigsuspend      107 /* Linux Specific                              */
+#define __NR_setresuid          108 /* Linux Specific, sigvec under SunOS	   */
+#define __NR_getresuid          109 /* Linux Specific, sigblock under SunOS	   */
+#define __NR_setresgid          110 /* Linux Specific, sigsetmask under SunOS	   */
+#define __NR_getresgid          111 /* Linux Specific, sigpause under SunOS	   */
+/* #define __NR_setregid32       75    Linux sparc32, sigstack under SunOS         */
+#define __NR_recvmsg            113 /* Common                                      */
+#define __NR_sendmsg            114 /* Common                                      */
+/* #define __NR_getgroups32     115    Linux sparc32, vtrace under SunOS           */
+#define __NR_gettimeofday       116 /* Common                                      */
+#define __NR_getrusage          117 /* Common                                      */
+#define __NR_getsockopt         118 /* Common                                      */
+#define __NR_getcwd		119 /* Linux Specific				   */
+#define __NR_readv              120 /* Common                                      */
+#define __NR_writev             121 /* Common                                      */
+#define __NR_settimeofday       122 /* Common                                      */
+#define __NR_fchown             123 /* Common                                      */
+#define __NR_fchmod             124 /* Common                                      */
+#define __NR_recvfrom           125 /* Common                                      */
+#define __NR_setreuid           126 /* Common                                      */
+#define __NR_setregid           127 /* Common                                      */
+#define __NR_rename             128 /* Common                                      */
+#define __NR_truncate           129 /* Common                                      */
+#define __NR_ftruncate          130 /* Common                                      */
+#define __NR_flock              131 /* Common                                      */
+#define __NR_lstat64		132 /* Linux Specific                              */
+#define __NR_sendto             133 /* Common                                      */
+#define __NR_shutdown           134 /* Common                                      */
+#define __NR_socketpair         135 /* Common                                      */
+#define __NR_mkdir              136 /* Common                                      */
+#define __NR_rmdir              137 /* Common                                      */
+#define __NR_utimes             138 /* SunOS Specific                              */
+#define __NR_stat64		139 /* Linux Specific			           */
+#define __NR_sendfile64         140 /* adjtime under SunOS                         */
+#define __NR_getpeername        141 /* Common                                      */
+#define __NR_futex              142 /* gethostid under SunOS                       */
+#define __NR_gettid             143 /* ENOSYS under SunOS                          */
+#define __NR_getrlimit		144 /* Common                                      */
+#define __NR_setrlimit          145 /* Common                                      */
+#define __NR_pivot_root		146 /* Linux Specific, killpg under SunOS          */
+#define __NR_prctl		147 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_read	148 /* ENOSYS under SunOS                          */
+#define __NR_pciconfig_write	149 /* ENOSYS under SunOS                          */
+#define __NR_getsockname        150 /* Common                                      */
+#define __NR_inotify_init       151 /* Linux specific                              */
+#define __NR_inotify_add_watch  152 /* Linux specific                              */
+#define __NR_poll               153 /* Common                                      */
+#define __NR_getdents64		154 /* Linux specific				   */
+/* #define __NR_fcntl64         155    Linux sparc32 Specific                      */
+#define __NR_inotify_rm_watch   156 /* Linux specific				   */
+#define __NR_statfs             157 /* Common                                      */
+#define __NR_fstatfs            158 /* Common                                      */
+#define __NR_umount             159 /* Common                                      */
+#define __NR_sched_set_affinity 160 /* Linux specific, async_daemon under SunOS    */
+#define __NR_sched_get_affinity 161 /* Linux specific, getfh under SunOS           */
+#define __NR_getdomainname      162 /* SunOS Specific                              */
+#define __NR_setdomainname      163 /* Common                                      */
+#define __NR_utrap_install	164 /* SYSV ABI/v9 required			   */
+#define __NR_quotactl           165 /* Common                                      */
+#define __NR_set_tid_address    166 /* Linux specific, exportfs under SunOS        */
+#define __NR_mount              167 /* Common                                      */
+#define __NR_ustat              168 /* Common                                      */
+#define __NR_setxattr           169 /* SunOS: semsys                               */
+#define __NR_lsetxattr          170 /* SunOS: msgsys                               */
+#define __NR_fsetxattr          171 /* SunOS: shmsys                               */
+#define __NR_getxattr           172 /* SunOS: auditsys                             */
+#define __NR_lgetxattr          173 /* SunOS: rfssys                               */
+#define __NR_getdents           174 /* Common                                      */
+#define __NR_setsid             175 /* Common                                      */
+#define __NR_fchdir             176 /* Common                                      */
+#define __NR_fgetxattr          177 /* SunOS: fchroot                              */
+#define __NR_listxattr          178 /* SunOS: vpixsys                              */
+#define __NR_llistxattr         179 /* SunOS: aioread                              */
+#define __NR_flistxattr         180 /* SunOS: aiowrite                             */
+#define __NR_removexattr        181 /* SunOS: aiowait                              */
+#define __NR_lremovexattr       182 /* SunOS: aiocancel                            */
+#define __NR_sigpending         183 /* Common                                      */
+#define __NR_query_module	184 /* Linux Specific				   */
+#define __NR_setpgid            185 /* Common                                      */
+#define __NR_fremovexattr       186 /* SunOS: pathconf                             */
+#define __NR_tkill              187 /* SunOS: fpathconf                            */
+#define __NR_exit_group		188 /* Linux specific, sysconf undef SunOS         */
+#define __NR_uname              189 /* Linux Specific                              */
+#define __NR_init_module        190 /* Linux Specific                              */
+#define __NR_personality        191 /* Linux Specific                              */
+#define __NR_remap_file_pages   192 /* Linux Specific                              */
+#define __NR_epoll_create       193 /* Linux Specific                              */
+#define __NR_epoll_ctl          194 /* Linux Specific                              */
+#define __NR_epoll_wait         195 /* Linux Specific                              */
+#define __NR_ioprio_set         196 /* Linux Specific                              */
+#define __NR_getppid            197 /* Linux Specific                              */
+#define __NR_sigaction          198 /* Linux Specific                              */
+#define __NR_sgetmask           199 /* Linux Specific                              */
+#define __NR_ssetmask           200 /* Linux Specific                              */
+#define __NR_sigsuspend         201 /* Linux Specific                              */
+#define __NR_oldlstat           202 /* Linux Specific                              */
+#define __NR_uselib             203 /* Linux Specific                              */
+#define __NR_readdir            204 /* Linux Specific                              */
+#define __NR_readahead          205 /* Linux Specific                              */
+#define __NR_socketcall         206 /* Linux Specific                              */
+#define __NR_syslog             207 /* Linux Specific                              */
+#define __NR_lookup_dcookie     208 /* Linux Specific                              */
+#define __NR_fadvise64          209 /* Linux Specific                              */
+#define __NR_fadvise64_64       210 /* Linux Specific                              */
+#define __NR_tgkill             211 /* Linux Specific                              */
+#define __NR_waitpid            212 /* Linux Specific                              */
+#define __NR_swapoff            213 /* Linux Specific                              */
+#define __NR_sysinfo            214 /* Linux Specific                              */
+#define __NR_ipc                215 /* Linux Specific                              */
+#define __NR_sigreturn          216 /* Linux Specific                              */
+#define __NR_clone              217 /* Linux Specific                              */
+#define __NR_ioprio_get         218 /* Linux Specific                              */
+#define __NR_adjtimex           219 /* Linux Specific                              */
+#define __NR_sigprocmask        220 /* Linux Specific                              */
+#define __NR_create_module      221 /* Linux Specific                              */
+#define __NR_delete_module      222 /* Linux Specific                              */
+#define __NR_get_kernel_syms    223 /* Linux Specific                              */
+#define __NR_getpgid            224 /* Linux Specific                              */
+#define __NR_bdflush            225 /* Linux Specific                              */
+#define __NR_sysfs              226 /* Linux Specific                              */
+#define __NR_afs_syscall        227 /* Linux Specific                              */
+#define __NR_setfsuid           228 /* Linux Specific                              */
+#define __NR_setfsgid           229 /* Linux Specific                              */
+#define __NR__newselect         230 /* Linux Specific                              */
+#ifdef __KERNEL__
+#define __NR_time		231 /* Linux sparc32                               */
+#endif
+#define __NR_splice             232 /* Linux Specific                              */
+#define __NR_stime              233 /* Linux Specific                              */
+#define __NR_statfs64           234 /* Linux Specific                              */
+#define __NR_fstatfs64          235 /* Linux Specific                              */
+#define __NR__llseek            236 /* Linux Specific                              */
+#define __NR_mlock              237
+#define __NR_munlock            238
+#define __NR_mlockall           239
+#define __NR_munlockall         240
+#define __NR_sched_setparam     241
+#define __NR_sched_getparam     242
+#define __NR_sched_setscheduler 243
+#define __NR_sched_getscheduler 244
+#define __NR_sched_yield        245
+#define __NR_sched_get_priority_max 246
+#define __NR_sched_get_priority_min 247
+#define __NR_sched_rr_get_interval  248
+#define __NR_nanosleep          249
+#define __NR_mremap             250
+#define __NR__sysctl            251
+#define __NR_getsid             252
+#define __NR_fdatasync          253
+#define __NR_nfsservctl         254
+#define __NR_sync_file_range	255
+#define __NR_clock_settime	256
+#define __NR_clock_gettime	257
+#define __NR_clock_getres	258
+#define __NR_clock_nanosleep	259
+#define __NR_sched_getaffinity	260
+#define __NR_sched_setaffinity	261
+#define __NR_timer_settime	262
+#define __NR_timer_gettime	263
+#define __NR_timer_getoverrun	264
+#define __NR_timer_delete	265
+#define __NR_timer_create	266
+/* #define __NR_vserver		267 Reserved for VSERVER */
+#define __NR_io_setup		268
+#define __NR_io_destroy		269
+#define __NR_io_submit		270
+#define __NR_io_cancel		271
+#define __NR_io_getevents	272
+#define __NR_mq_open		273
+#define __NR_mq_unlink		274
+#define __NR_mq_timedsend	275
+#define __NR_mq_timedreceive	276
+#define __NR_mq_notify		277
+#define __NR_mq_getsetattr	278
+#define __NR_waitid		279
+#define __NR_tee		280
+#define __NR_add_key		281
+#define __NR_request_key	282
+#define __NR_keyctl		283
+#define __NR_openat		284
+#define __NR_mkdirat		285
+#define __NR_mknodat		286
+#define __NR_fchownat		287
+#define __NR_futimesat		288
+#define __NR_fstatat64		289
+#define __NR_unlinkat		290
+#define __NR_renameat		291
+#define __NR_linkat		292
+#define __NR_symlinkat		293
+#define __NR_readlinkat		294
+#define __NR_fchmodat		295
+#define __NR_faccessat		296
+#define __NR_pselect6		297
+#define __NR_ppoll		298
+#define __NR_unshare		299
+#define __NR_set_robust_list	300
+#define __NR_get_robust_list	301
+#define __NR_migrate_pages	302
+#define __NR_mbind		303
+#define __NR_get_mempolicy	304
+#define __NR_set_mempolicy	305
+#define __NR_kexec_load		306
+#define __NR_move_pages		307
+#define __NR_getcpu		308
+#define __NR_epoll_pwait	309
+#define __NR_utimensat		310
+#define __NR_signalfd		311
+#define __NR_timerfd_create	312
+#define __NR_eventfd		313
+#define __NR_fallocate		314
+#define __NR_timerfd_settime	315
+#define __NR_timerfd_gettime	316
+#define __NR_signalfd4		317
+#define __NR_eventfd2		318
+#define __NR_epoll_create1	319
+#define __NR_dup3		320
+#define __NR_pipe2		321
+#define __NR_inotify_init1	322
+
+#define NR_SYSCALLS		323
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_COMPAT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGSUSPEND
+#define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _SPARC64_UNISTD_H */
diff --git a/arch/sparc/include/asm/upa.h b/arch/sparc/include/asm/upa.h
new file mode 100644
index 000000000000..5b1633223f92
--- /dev/null
+++ b/arch/sparc/include/asm/upa.h
@@ -0,0 +1,109 @@
+#ifndef _SPARC64_UPA_H
+#define _SPARC64_UPA_H
+
+#include <asm/asi.h>
+
+/* UPA level registers and defines. */
+
+/* UPA Config Register */
+#define UPA_CONFIG_RESV		0xffffffffc0000000 /* Reserved.                    */
+#define UPA_CONFIG_PCON		0x000000003fc00000 /* Depth of various sys queues. */
+#define UPA_CONFIG_MID		0x00000000003e0000 /* Module ID.                   */
+#define UPA_CONFIG_PCAP		0x000000000001ffff /* Port Capabilities.           */
+
+/* UPA Port ID Register */
+#define UPA_PORTID_FNP		0xff00000000000000 /* Hardcoded to 0xfc on ultra.  */
+#define UPA_PORTID_RESV		0x00fffff800000000 /* Reserved.                    */
+#define UPA_PORTID_ECCVALID     0x0000000400000000 /* Zero if mod can generate ECC */
+#define UPA_PORTID_ONEREAD      0x0000000200000000 /* Set if mod generates P_RASB  */
+#define UPA_PORTID_PINTRDQ      0x0000000180000000 /* # outstanding P_INT_REQ's    */
+#define UPA_PORTID_PREQDQ       0x000000007e000000 /* slave-wr's to mod supported  */
+#define UPA_PORTID_PREQRD       0x0000000001e00000 /* # incoming P_REQ's supported */
+#define UPA_PORTID_UPACAP       0x00000000001f0000 /* UPA capabilities of mod      */
+#define UPA_PORTID_ID           0x000000000000ffff /* Module Identification bits  */
+
+/* UPA I/O space accessors */
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+static inline unsigned char _upa_readb(unsigned long addr)
+{
+	unsigned char ret;
+
+	__asm__ __volatile__("lduba\t[%1] %2, %0\t/* upa_readb */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline unsigned short _upa_readw(unsigned long addr)
+{
+	unsigned short ret;
+
+	__asm__ __volatile__("lduha\t[%1] %2, %0\t/* upa_readw */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline unsigned int _upa_readl(unsigned long addr)
+{
+	unsigned int ret;
+
+	__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* upa_readl */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline unsigned long _upa_readq(unsigned long addr)
+{
+	unsigned long ret;
+
+	__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* upa_readq */"
+			     : "=r" (ret)
+			     : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+
+	return ret;
+}
+
+static inline void _upa_writeb(unsigned char b, unsigned long addr)
+{
+	__asm__ __volatile__("stba\t%0, [%1] %2\t/* upa_writeb */"
+			     : /* no outputs */
+			     : "r" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _upa_writew(unsigned short w, unsigned long addr)
+{
+	__asm__ __volatile__("stha\t%0, [%1] %2\t/* upa_writew */"
+			     : /* no outputs */
+			     : "r" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _upa_writel(unsigned int l, unsigned long addr)
+{
+	__asm__ __volatile__("stwa\t%0, [%1] %2\t/* upa_writel */"
+			     : /* no outputs */
+			     : "r" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+static inline void _upa_writeq(unsigned long q, unsigned long addr)
+{
+	__asm__ __volatile__("stxa\t%0, [%1] %2\t/* upa_writeq */"
+			     : /* no outputs */
+			     : "r" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+}
+
+#define upa_readb(__addr)		(_upa_readb((unsigned long)(__addr)))
+#define upa_readw(__addr)		(_upa_readw((unsigned long)(__addr)))
+#define upa_readl(__addr)		(_upa_readl((unsigned long)(__addr)))
+#define upa_readq(__addr)		(_upa_readq((unsigned long)(__addr)))
+#define upa_writeb(__b, __addr)		(_upa_writeb((__b), (unsigned long)(__addr)))
+#define upa_writew(__w, __addr)		(_upa_writew((__w), (unsigned long)(__addr)))
+#define upa_writel(__l, __addr)		(_upa_writel((__l), (unsigned long)(__addr)))
+#define upa_writeq(__q, __addr)		(_upa_writeq((__q), (unsigned long)(__addr)))
+#endif /* __KERNEL__ && !__ASSEMBLY__ */
+
+#endif /* !(_SPARC64_UPA_H) */
diff --git a/arch/sparc/include/asm/user.h b/arch/sparc/include/asm/user.h
new file mode 100644
index 000000000000..3400ea87f148
--- /dev/null
+++ b/arch/sparc/include/asm/user.h
@@ -0,0 +1,6 @@
+#ifndef _SPARC_USER_H
+#define _SPARC_USER_H
+
+/* Nothing to define.  */
+
+#endif /* !(_SPARC_USER_H) */
diff --git a/arch/sparc/include/asm/utrap.h b/arch/sparc/include/asm/utrap.h
new file mode 100644
index 000000000000..b10e527c22d9
--- /dev/null
+++ b/arch/sparc/include/asm/utrap.h
@@ -0,0 +1,51 @@
+/*
+ * include/asm/utrap.h
+ *
+ * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
+ */
+
+#ifndef __ASM_SPARC64_UTRAP_H
+#define __ASM_SPARC64_UTRAP_H
+
+#define UT_INSTRUCTION_EXCEPTION		1
+#define UT_INSTRUCTION_ERROR			2
+#define UT_INSTRUCTION_PROTECTION		3
+#define UT_ILLTRAP_INSTRUCTION			4
+#define UT_ILLEGAL_INSTRUCTION			5
+#define UT_PRIVILEGED_OPCODE			6
+#define UT_FP_DISABLED				7
+#define UT_FP_EXCEPTION_IEEE_754		8
+#define UT_FP_EXCEPTION_OTHER			9
+#define UT_TAG_OVERVIEW				10
+#define UT_DIVISION_BY_ZERO			11
+#define UT_DATA_EXCEPTION			12
+#define UT_DATA_ERROR				13
+#define UT_DATA_PROTECTION			14
+#define UT_MEM_ADDRESS_NOT_ALIGNED		15
+#define UT_PRIVILEGED_ACTION			16
+#define UT_ASYNC_DATA_ERROR			17
+#define UT_TRAP_INSTRUCTION_16			18
+#define UT_TRAP_INSTRUCTION_17			19
+#define UT_TRAP_INSTRUCTION_18			20
+#define UT_TRAP_INSTRUCTION_19			21
+#define UT_TRAP_INSTRUCTION_20			22
+#define UT_TRAP_INSTRUCTION_21			23
+#define UT_TRAP_INSTRUCTION_22			24
+#define UT_TRAP_INSTRUCTION_23			25
+#define UT_TRAP_INSTRUCTION_24			26
+#define UT_TRAP_INSTRUCTION_25			27
+#define UT_TRAP_INSTRUCTION_26			28
+#define UT_TRAP_INSTRUCTION_27			29
+#define UT_TRAP_INSTRUCTION_28			30
+#define UT_TRAP_INSTRUCTION_29			31
+#define UT_TRAP_INSTRUCTION_30			32
+#define UT_TRAP_INSTRUCTION_31			33
+
+#define	UTH_NOCHANGE				(-1)
+
+#ifndef __ASSEMBLY__
+typedef int utrap_entry_t;
+typedef void *utrap_handler_t;
+#endif /* __ASSEMBLY__ */
+
+#endif /* !(__ASM_SPARC64_PROCESSOR_H) */
diff --git a/arch/sparc/include/asm/vac-ops.h b/arch/sparc/include/asm/vac-ops.h
new file mode 100644
index 000000000000..d10527611f11
--- /dev/null
+++ b/arch/sparc/include/asm/vac-ops.h
@@ -0,0 +1,134 @@
+#ifndef _SPARC_VAC_OPS_H
+#define _SPARC_VAC_OPS_H
+
+/* vac-ops.h: Inline assembly routines to do operations on the Sparc
+ *            VAC (virtual address cache) for the sun4c.
+ *
+ * Copyright (C) 1994, David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <asm/sysen.h>
+#include <asm/contregs.h>
+#include <asm/asi.h>
+
+/* The SUN4C models have a virtually addressed write-through
+ * cache.
+ *
+ * The cache tags are directly accessible through an ASI and
+ * each have the form:
+ *
+ * ------------------------------------------------------------
+ * | MBZ | CONTEXT | WRITE | PRIV | VALID | MBZ | TagID | MBZ |
+ * ------------------------------------------------------------
+ *  31 25  24   22     21     20     19    18 16  15   2  1  0
+ *
+ * MBZ: These bits are either unused and/or reserved and should
+ *      be written as zeroes.
+ *
+ * CONTEXT: Records the context to which this cache line belongs.
+ *
+ * WRITE: A copy of the writable bit from the mmu pte access bits.
+ *
+ * PRIV: A copy of the privileged bit from the pte access bits.
+ *
+ * VALID: If set, this line is valid, else invalid.
+ *
+ * TagID: Fourteen bits of tag ID.
+ *
+ * Every virtual address is seen by the cache like this:
+ *
+ * ----------------------------------------
+ * |  RESV  | TagID | LINE | BYTE-in-LINE |
+ * ----------------------------------------
+ *  31    30 29   16 15   4 3            0
+ *
+ * RESV: Unused/reserved.
+ *
+ * TagID: Used to match the Tag-ID in that vac tags.
+ *
+ * LINE: Which line within the cache
+ *
+ * BYTE-in-LINE: Which byte within the cache line.
+ */
+
+/* Sun4c VAC Tags */
+#define S4CVACTAG_CID      0x01c00000
+#define S4CVACTAG_W        0x00200000
+#define S4CVACTAG_P        0x00100000
+#define S4CVACTAG_V        0x00080000
+#define S4CVACTAG_TID      0x0000fffc
+
+/* Sun4c VAC Virtual Address */
+/* These aren't used, why bother? (Anton) */
+#if 0
+#define S4CVACVA_TID       0x3fff0000
+#define S4CVACVA_LINE      0x0000fff0
+#define S4CVACVA_BIL       0x0000000f
+#endif
+
+/* The indexing of cache lines creates a problem.  Because the line
+ * field of a virtual address extends past the page offset within
+ * the virtual address it is possible to have what are called
+ * 'bad aliases' which will create inconsistencies.  So we must make
+ * sure that within a context that if a physical page is mapped
+ * more than once, that 'extra' line bits are the same.  If this is
+ * not the case, and thus is a 'bad alias' we must turn off the
+ * cacheable bit in the pte's of all such pages.
+ */
+
+#ifdef CONFIG_SUN4
+#define S4CVAC_BADBITS     0x0001e000
+#else
+#define S4CVAC_BADBITS    0x0000f000
+#endif
+
+/* The following is true if vaddr1 and vaddr2 would cause
+ * a 'bad alias'.
+ */
+#define S4CVAC_BADALIAS(vaddr1, vaddr2) \
+        ((((unsigned long) (vaddr1)) ^ ((unsigned long) (vaddr2))) & \
+	 (S4CVAC_BADBITS))
+
+/* The following structure describes the characteristics of a sun4c
+ * VAC as probed from the prom during boot time.
+ */
+struct sun4c_vac_props {
+	unsigned int num_bytes;     /* Size of the cache */
+	unsigned int num_lines;     /* Number of cache lines */
+	unsigned int do_hwflushes;  /* Hardware flushing available? */
+	enum { VAC_NONE, VAC_WRITE_THROUGH,
+	    VAC_WRITE_BACK } type;  /* What type of VAC? */
+	unsigned int linesize;      /* Size of each line in bytes */
+	unsigned int log2lsize;     /* log2(linesize) */
+	unsigned int on;            /* VAC is enabled */
+};
+
+extern struct sun4c_vac_props sun4c_vacinfo;
+
+/* sun4c_enable_vac() enables the sun4c virtual address cache. */
+static inline void sun4c_enable_vac(void)
+{
+	__asm__ __volatile__("lduba [%0] %1, %%g1\n\t"
+			     "or    %%g1, %2, %%g1\n\t"
+			     "stba  %%g1, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" ((unsigned int) AC_SENABLE),
+			     "i" (ASI_CONTROL), "i" (SENABLE_CACHE)
+			     : "g1", "memory");
+	sun4c_vacinfo.on = 1;
+}
+
+/* sun4c_disable_vac() disables the virtual address cache. */
+static inline void sun4c_disable_vac(void)
+{
+	__asm__ __volatile__("lduba [%0] %1, %%g1\n\t"
+			     "andn  %%g1, %2, %%g1\n\t"
+			     "stba  %%g1, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" ((unsigned int) AC_SENABLE),
+			     "i" (ASI_CONTROL), "i" (SENABLE_CACHE)
+			     : "g1", "memory");
+	sun4c_vacinfo.on = 0;
+}
+
+#endif /* !(_SPARC_VAC_OPS_H) */
diff --git a/arch/sparc/include/asm/vaddrs.h b/arch/sparc/include/asm/vaddrs.h
new file mode 100644
index 000000000000..541e13755cec
--- /dev/null
+++ b/arch/sparc/include/asm/vaddrs.h
@@ -0,0 +1,64 @@
+#ifndef _SPARC_VADDRS_H
+#define _SPARC_VADDRS_H
+
+#include <asm/head.h>
+
+/*
+ * asm/vaddrs.h:  Here we define the virtual addresses at
+ *                      which important things will be mapped.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 2000 Anton Blanchard (anton@samba.org)
+ */
+
+#define SRMMU_MAXMEM		0x0c000000
+
+#define SRMMU_NOCACHE_VADDR	(KERNBASE + SRMMU_MAXMEM)
+				/* = 0x0fc000000 */
+/* XXX Empiricals - this needs to go away - KMW */
+#define SRMMU_MIN_NOCACHE_PAGES (550)
+#define SRMMU_MAX_NOCACHE_PAGES	(1280)
+
+/* The following constant is used in mm/srmmu.c::srmmu_nocache_calcsize()
+ * to determine the amount of memory that will be reserved as nocache:
+ *
+ * 256 pages will be taken as nocache per each
+ * SRMMU_NOCACHE_ALCRATIO MB of system memory.
+ *
+ * limits enforced:	nocache minimum = 256 pages
+ *			nocache maximum = 1280 pages
+ */
+#define SRMMU_NOCACHE_ALCRATIO	64	/* 256 pages per 64MB of system RAM */
+
+#define SUN4M_IOBASE_VADDR	0xfd000000 /* Base for mapping pages */
+#define IOBASE_VADDR		0xfe000000
+#define IOBASE_END		0xfe600000
+
+/*
+ * On the sun4/4c we need a place
+ * to reliably map locked down kernel data.  This includes the
+ * task_struct and kernel stack pages of each process plus the
+ * scsi buffers during dvma IO transfers, also the floppy buffers
+ * during pseudo dma which runs with traps off (no faults allowed).
+ * Some quick calculations yield:
+ *       NR_TASKS <512> * (3 * PAGE_SIZE) == 0x600000
+ * Subtract this from 0xc00000 and you get 0x927C0 of vm left
+ * over to map SCSI dvma + floppy pseudo-dma buffers.  So be
+ * careful if you change NR_TASKS or else there won't be enough
+ * room for it all.
+ */
+#define SUN4C_LOCK_VADDR	0xff000000
+#define SUN4C_LOCK_END		0xffc00000
+
+#define KADB_DEBUGGER_BEGVM	0xffc00000 /* Where kern debugger is in virt-mem */
+#define KADB_DEBUGGER_ENDVM	0xffd00000
+#define DEBUG_FIRSTVADDR	KADB_DEBUGGER_BEGVM
+#define DEBUG_LASTVADDR		KADB_DEBUGGER_ENDVM
+
+#define LINUX_OPPROM_BEGVM	0xffd00000
+#define LINUX_OPPROM_ENDVM	0xfff00000
+
+#define DVMA_VADDR		0xfff00000 /* Base area of the DVMA on suns */
+#define DVMA_END		0xfffc0000
+
+#endif /* !(_SPARC_VADDRS_H) */
diff --git a/arch/sparc/include/asm/vfc_ioctls.h b/arch/sparc/include/asm/vfc_ioctls.h
new file mode 100644
index 000000000000..af8b69007b22
--- /dev/null
+++ b/arch/sparc/include/asm/vfc_ioctls.h
@@ -0,0 +1,58 @@
+/* Copyright (c) 1996 by Manish Vachharajani */
+
+#ifndef _LINUX_VFC_IOCTLS_H_
+#define	_LINUX_VFC_IOCTLS_H_
+
+	/* IOCTLs */
+#define VFC_IOCTL(a)          (('j' << 8) | a)
+#define VFCGCTRL	(VFC_IOCTL (0))	        /* get vfc attributes */
+#define VFCSCTRL	(VFC_IOCTL (1))  	/* set vfc attributes */
+#define VFCGVID		(VFC_IOCTL (2)) 	/* get video decoder attributes */
+#define VFCSVID		(VFC_IOCTL (3))	        /* set video decoder attributes */
+#define VFCHUE		(VFC_IOCTL (4))   	/* set hue */
+#define VFCPORTCHG	(VFC_IOCTL (5))  	/* change port */
+#define VFCRDINFO	(VFC_IOCTL (6))  	/* read info */
+
+	/* Options for setting the vfc attributes and status */
+#define MEMPRST		0x1	/* reset FIFO ptr. */
+#define CAPTRCMD	0x2	/* start capture and wait */
+#define DIAGMODE	0x3	/* diag mode */
+#define NORMMODE	0x4	/* normal mode */
+#define CAPTRSTR	0x5	/* start capture */
+#define CAPTRWAIT	0x6	/* wait for capture to finish */
+
+
+	/* Options for the decoder */
+#define STD_NTSC	0x1	/* NTSC mode */
+#define STD_PAL		0x2	/* PAL mode */
+#define COLOR_ON	0x3	/* force color ON */
+#define MONO		0x4	/* force color OFF */
+
+	/* Values returned by ioctl 2 */
+
+#define NO_LOCK	        1
+#define NTSC_COLOR	2
+#define NTSC_NOCOLOR    3
+#define PAL_COLOR	4
+#define PAL_NOCOLOR	5
+
+/* Not too sure what this does yet */
+	/* Options for setting Field number */
+#define ODD_FIELD	0x1
+#define EVEN_FIELD	0x0
+#define ACTIVE_ONLY     0x2
+#define NON_ACTIVE	0x0
+
+/* Debug options */
+#define VFC_I2C_SEND 0
+#define VFC_I2C_RECV 1
+
+struct vfc_debug_inout
+{
+	unsigned long addr;
+	unsigned long ret;
+	unsigned long len;
+	unsigned char __user *buffer;
+};
+
+#endif /* _LINUX_VFC_IOCTLS_H_ */
diff --git a/arch/sparc/include/asm/vga.h b/arch/sparc/include/asm/vga.h
new file mode 100644
index 000000000000..c69d5b2ba19a
--- /dev/null
+++ b/arch/sparc/include/asm/vga.h
@@ -0,0 +1,33 @@
+/*
+ *	Access to VGA videoram
+ *
+ *	(c) 1998 Martin Mares <mj@ucw.cz>
+ */
+
+#ifndef _LINUX_ASM_VGA_H_
+#define _LINUX_ASM_VGA_H_
+
+#include <asm/types.h>
+
+#define VT_BUF_HAVE_RW
+
+#undef scr_writew
+#undef scr_readw
+
+static inline void scr_writew(u16 val, u16 *addr)
+{
+	BUG_ON((long) addr >= 0);
+
+	*addr = val;
+}
+
+static inline u16 scr_readw(const u16 *addr)
+{
+	BUG_ON((long) addr >= 0);
+
+	return *addr;
+}
+
+#define VGA_MAP_MEM(x,s) (x)
+
+#endif
diff --git a/arch/sparc/include/asm/viking.h b/arch/sparc/include/asm/viking.h
new file mode 100644
index 000000000000..989930aeb093
--- /dev/null
+++ b/arch/sparc/include/asm/viking.h
@@ -0,0 +1,253 @@
+/*
+ * viking.h:  Defines specific to the GNU/Viking MBUS module.
+ *            This is SRMMU stuff.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+#ifndef _SPARC_VIKING_H
+#define _SPARC_VIKING_H
+
+#include <asm/asi.h>
+#include <asm/mxcc.h>
+#include <asm/pgtsrmmu.h>
+
+/* Bits in the SRMMU control register for GNU/Viking modules.
+ *
+ * -----------------------------------------------------------
+ * |impl-vers| RSV |TC|AC|SP|BM|PC|MBM|SB|IC|DC|PSO|RSV|NF|ME|
+ * -----------------------------------------------------------
+ *  31     24 23-17 16 15 14 13 12 11  10  9  8  7  6-2  1  0
+ *
+ * TC: Tablewalk Cacheable -- 0 = Twalks are not cacheable in E-cache
+ *                            1 = Twalks are cacheable in E-cache
+ *
+ * GNU/Viking will only cache tablewalks in the E-cache (mxcc) if present
+ * and never caches them internally (or so states the docs).  Therefore
+ * for machines lacking an E-cache (ie. in MBUS mode) this bit must
+ * remain cleared.
+ *
+ * AC: Alternate Cacheable -- 0 = Passthru physical accesses not cacheable
+ *                            1 = Passthru physical accesses cacheable
+ *
+ * This indicates whether accesses are cacheable when no cachable bit
+ * is present in the pte when the processor is in boot-mode or the
+ * access does not need pte's for translation (ie. pass-thru ASI's).
+ * "Cachable" is only referring to E-cache (if present) and not the
+ * on chip split I/D caches of the GNU/Viking.
+ *
+ * SP: SnooP Enable -- 0 = bus snooping off, 1 = bus snooping on
+ *
+ * This enables snooping on the GNU/Viking bus.  This must be on
+ * for the hardware cache consistency mechanisms of the GNU/Viking
+ * to work at all.  On non-mxcc GNU/Viking modules the split I/D
+ * caches will snoop regardless of whether they are enabled, this
+ * takes care of the case where the I or D or both caches are turned
+ * off yet still contain valid data.  Note also that this bit does
+ * not affect GNU/Viking store-buffer snoops, those happen if the
+ * store-buffer is enabled no matter what.
+ *
+ * BM: Boot Mode -- 0 = not in boot mode, 1 = in boot mode
+ *
+ * This indicates whether the GNU/Viking is in boot-mode or not,
+ * if it is then all instruction fetch physical addresses are
+ * computed as 0xff0000000 + low 28 bits of requested address.
+ * GNU/Viking boot-mode does not affect data accesses.  Also,
+ * in boot mode instruction accesses bypass the split on chip I/D
+ * caches, they may be cached by the GNU/MXCC if present and enabled.
+ *
+ * MBM: MBus Mode -- 0 = not in MBus mode, 1 = in MBus mode
+ *
+ * This indicated the GNU/Viking configuration present.  If in
+ * MBUS mode, the GNU/Viking lacks a GNU/MXCC E-cache.  If it is
+ * not then the GNU/Viking is on a module VBUS connected directly
+ * to a GNU/MXCC cache controller.  The GNU/MXCC can be thus connected
+ * to either an GNU/MBUS (sun4m) or the packet-switched GNU/XBus (sun4d).
+ *
+ * SB: StoreBuffer enable -- 0 = store buffer off, 1 = store buffer on
+ *
+ * The GNU/Viking store buffer allows the chip to continue execution
+ * after a store even if the data cannot be placed in one of the
+ * caches during that cycle.  If disabled, all stores operations
+ * occur synchronously.
+ *
+ * IC: Instruction Cache -- 0 = off, 1 = on
+ * DC: Data Cache -- 0 = off, 1 = 0n
+ *
+ * These bits enable the on-cpu GNU/Viking split I/D caches.  Note,
+ * as mentioned above, these caches will snoop the bus in GNU/MBUS
+ * configurations even when disabled to avoid data corruption.
+ *
+ * NF: No Fault -- 0 = faults generate traps, 1 = faults don't trap
+ * ME: MMU enable -- 0 = mmu not translating, 1 = mmu translating
+ *
+ */
+
+#define VIKING_MMUENABLE    0x00000001
+#define VIKING_NOFAULT      0x00000002
+#define VIKING_PSO          0x00000080
+#define VIKING_DCENABLE     0x00000100   /* Enable data cache */
+#define VIKING_ICENABLE     0x00000200   /* Enable instruction cache */
+#define VIKING_SBENABLE     0x00000400   /* Enable store buffer */
+#define VIKING_MMODE        0x00000800   /* MBUS mode */
+#define VIKING_PCENABLE     0x00001000   /* Enable parity checking */
+#define VIKING_BMODE        0x00002000   
+#define VIKING_SPENABLE     0x00004000   /* Enable bus cache snooping */
+#define VIKING_ACENABLE     0x00008000   /* Enable alternate caching */
+#define VIKING_TCENABLE     0x00010000   /* Enable table-walks to be cached */
+#define VIKING_DPENABLE     0x00040000   /* Enable the data prefetcher */
+
+/*
+ * GNU/Viking Breakpoint Action Register fields.
+ */
+#define VIKING_ACTION_MIX   0x00001000   /* Enable multiple instructions */
+
+/*
+ * GNU/Viking Cache Tags.
+ */
+#define VIKING_PTAG_VALID   0x01000000   /* Cache block is valid */
+#define VIKING_PTAG_DIRTY   0x00010000   /* Block has been modified */
+#define VIKING_PTAG_SHARED  0x00000100   /* Shared with some other cache */
+
+#ifndef __ASSEMBLY__
+
+static inline void viking_flush_icache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_IC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void viking_flush_dcache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%%g0] %0\n\t"
+			     : /* no outputs */
+			     : "i" (ASI_M_DC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void viking_unlock_icache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (0x80000000), "i" (ASI_M_IC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void viking_unlock_dcache(void)
+{
+	__asm__ __volatile__("sta %%g0, [%0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (0x80000000), "i" (ASI_M_DC_FLCLEAR)
+			     : "memory");
+}
+
+static inline void viking_set_bpreg(unsigned long regval)
+{
+	__asm__ __volatile__("sta %0, [%%g0] %1\n\t"
+			     : /* no outputs */
+			     : "r" (regval), "i" (ASI_M_ACTION)
+			     : "memory");
+}
+
+static inline unsigned long viking_get_bpreg(void)
+{
+	unsigned long regval;
+
+	__asm__ __volatile__("lda [%%g0] %1, %0\n\t"
+			     : "=r" (regval)
+			     : "i" (ASI_M_ACTION));
+	return regval;
+}
+
+static inline void viking_get_dcache_ptag(int set, int block,
+					      unsigned long *data)
+{
+	unsigned long ptag = ((set & 0x7f) << 5) | ((block & 0x3) << 26) |
+			     0x80000000;
+	unsigned long info, page;
+
+	__asm__ __volatile__ ("ldda [%2] %3, %%g2\n\t"
+			      "or %%g0, %%g2, %0\n\t"
+			      "or %%g0, %%g3, %1\n\t"
+			      : "=r" (info), "=r" (page)
+			      : "r" (ptag), "i" (ASI_M_DATAC_TAG)
+			      : "g2", "g3");
+	data[0] = info;
+	data[1] = page;
+}
+
+static inline void viking_mxcc_turn_off_parity(unsigned long *mregp,
+						   unsigned long *mxcc_cregp)
+{
+	unsigned long mreg = *mregp;
+	unsigned long mxcc_creg = *mxcc_cregp;
+
+	mreg &= ~(VIKING_PCENABLE);
+	mxcc_creg &= ~(MXCC_CTL_PARE);
+
+	__asm__ __volatile__ ("set 1f, %%g2\n\t"
+			      "andcc %%g2, 4, %%g0\n\t"
+			      "bne 2f\n\t"
+			      " nop\n"
+			      "1:\n\t"
+			      "sta %0, [%%g0] %3\n\t"
+			      "sta %1, [%2] %4\n\t"
+			      "b 1f\n\t"
+			      " nop\n\t"
+			      "nop\n"
+			      "2:\n\t"
+			      "sta %0, [%%g0] %3\n\t"
+			      "sta %1, [%2] %4\n"
+			      "1:\n\t"
+			      : /* no output */
+			      : "r" (mreg), "r" (mxcc_creg),
+			        "r" (MXCC_CREG), "i" (ASI_M_MMUREGS),
+			        "i" (ASI_M_MXCC)
+			      : "g2", "memory", "cc");
+	*mregp = mreg;
+	*mxcc_cregp = mxcc_creg;
+}
+
+static inline unsigned long viking_hwprobe(unsigned long vaddr)
+{
+	unsigned long val;
+
+	vaddr &= PAGE_MASK;
+	/* Probe all MMU entries. */
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (val)
+			     : "r" (vaddr | 0x400), "i" (ASI_M_FLUSH_PROBE));
+	if (!val)
+		return 0;
+
+	/* Probe region. */
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (val)
+			     : "r" (vaddr | 0x200), "i" (ASI_M_FLUSH_PROBE));
+	if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
+		vaddr &= ~SRMMU_PGDIR_MASK;
+		vaddr >>= PAGE_SHIFT;
+		return val | (vaddr << 8);
+	}
+
+	/* Probe segment. */
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (val)
+			     : "r" (vaddr | 0x100), "i" (ASI_M_FLUSH_PROBE));
+	if ((val & SRMMU_ET_MASK) == SRMMU_ET_PTE) {
+		vaddr &= ~SRMMU_REAL_PMD_MASK;
+		vaddr >>= PAGE_SHIFT;
+		return val | (vaddr << 8);
+	}
+
+	/* Probe page. */
+	__asm__ __volatile__("lda [%1] %2, %0\n\t"
+			     : "=r" (val)
+			     : "r" (vaddr), "i" (ASI_M_FLUSH_PROBE));
+	return val;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* !(_SPARC_VIKING_H) */
diff --git a/arch/sparc/include/asm/vio.h b/arch/sparc/include/asm/vio.h
new file mode 100644
index 000000000000..d4de32f0f8af
--- /dev/null
+++ b/arch/sparc/include/asm/vio.h
@@ -0,0 +1,406 @@
+#ifndef _SPARC64_VIO_H
+#define _SPARC64_VIO_H
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/timer.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/list.h>
+#include <linux/log2.h>
+
+#include <asm/ldc.h>
+#include <asm/mdesc.h>
+
+struct vio_msg_tag {
+	u8			type;
+#define VIO_TYPE_CTRL		0x01
+#define VIO_TYPE_DATA		0x02
+#define VIO_TYPE_ERR		0x04
+
+	u8			stype;
+#define VIO_SUBTYPE_INFO	0x01
+#define VIO_SUBTYPE_ACK		0x02
+#define VIO_SUBTYPE_NACK	0x04
+
+	u16			stype_env;
+#define VIO_VER_INFO		0x0001
+#define VIO_ATTR_INFO		0x0002
+#define VIO_DRING_REG		0x0003
+#define VIO_DRING_UNREG		0x0004
+#define VIO_RDX			0x0005
+#define VIO_PKT_DATA		0x0040
+#define VIO_DESC_DATA		0x0041
+#define VIO_DRING_DATA		0x0042
+#define VNET_MCAST_INFO		0x0101
+
+	u32		sid;
+};
+
+struct vio_rdx {
+	struct vio_msg_tag	tag;
+	u64			resv[6];
+};
+
+struct vio_ver_info {
+	struct vio_msg_tag	tag;
+	u16			major;
+	u16			minor;
+	u8			dev_class;
+#define VDEV_NETWORK		0x01
+#define VDEV_NETWORK_SWITCH	0x02
+#define VDEV_DISK		0x03
+#define VDEV_DISK_SERVER	0x04
+
+	u8			resv1[3];
+	u64			resv2[5];
+};
+
+struct vio_dring_register {
+	struct vio_msg_tag	tag;
+	u64			dring_ident;
+	u32			num_descr;
+	u32			descr_size;
+	u16			options;
+#define VIO_TX_DRING		0x0001
+#define VIO_RX_DRING		0x0002
+	u16			resv;
+	u32			num_cookies;
+	struct ldc_trans_cookie	cookies[0];
+};
+
+struct vio_dring_unregister {
+	struct vio_msg_tag	tag;
+	u64			dring_ident;
+	u64			resv[5];
+};
+
+/* Data transfer modes */
+#define VIO_PKT_MODE		0x01 /* Packet based transfer	*/
+#define VIO_DESC_MODE		0x02 /* In-band descriptors	*/
+#define VIO_DRING_MODE		0x03 /* Descriptor rings	*/
+
+struct vio_dring_data {
+	struct vio_msg_tag	tag;
+	u64			seq;
+	u64			dring_ident;
+	u32			start_idx;
+	u32			end_idx;
+	u8			state;
+#define VIO_DRING_ACTIVE	0x01
+#define VIO_DRING_STOPPED	0x02
+
+	u8			__pad1;
+	u16			__pad2;
+	u32			__pad3;
+	u64			__par4[2];
+};
+
+struct vio_dring_hdr {
+	u8			state;
+#define VIO_DESC_FREE		0x01
+#define VIO_DESC_READY		0x02
+#define VIO_DESC_ACCEPTED	0x03
+#define VIO_DESC_DONE		0x04
+	u8			ack;
+#define VIO_ACK_ENABLE		0x01
+#define VIO_ACK_DISABLE		0x00
+
+	u16			__pad1;
+	u32			__pad2;
+};
+
+/* VIO disk specific structures and defines */
+struct vio_disk_attr_info {
+	struct vio_msg_tag	tag;
+	u8			xfer_mode;
+	u8			vdisk_type;
+#define VD_DISK_TYPE_SLICE	0x01 /* Slice in block device	*/
+#define VD_DISK_TYPE_DISK	0x02 /* Entire block device	*/
+	u16			resv1;
+	u32			vdisk_block_size;
+	u64			operations;
+	u64			vdisk_size;
+	u64			max_xfer_size;
+	u64			resv2[2];
+};
+
+struct vio_disk_desc {
+	struct vio_dring_hdr	hdr;
+	u64			req_id;
+	u8			operation;
+#define VD_OP_BREAD		0x01 /* Block read			*/
+#define VD_OP_BWRITE		0x02 /* Block write			*/
+#define VD_OP_FLUSH		0x03 /* Flush disk contents		*/
+#define VD_OP_GET_WCE		0x04 /* Get write-cache status		*/
+#define VD_OP_SET_WCE		0x05 /* Enable/disable write-cache	*/
+#define VD_OP_GET_VTOC		0x06 /* Get VTOC			*/
+#define VD_OP_SET_VTOC		0x07 /* Set VTOC			*/
+#define VD_OP_GET_DISKGEOM	0x08 /* Get disk geometry		*/
+#define VD_OP_SET_DISKGEOM	0x09 /* Set disk geometry		*/
+#define VD_OP_SCSICMD		0x0a /* SCSI control command		*/
+#define VD_OP_GET_DEVID		0x0b /* Get device ID			*/
+#define VD_OP_GET_EFI		0x0c /* Get EFI				*/
+#define VD_OP_SET_EFI		0x0d /* Set EFI				*/
+	u8			slice;
+	u16			resv1;
+	u32			status;
+	u64			offset;
+	u64			size;
+	u32			ncookies;
+	u32			resv2;
+	struct ldc_trans_cookie	cookies[0];
+};
+
+#define VIO_DISK_VNAME_LEN	8
+#define VIO_DISK_ALABEL_LEN	128
+#define VIO_DISK_NUM_PART	8
+
+struct vio_disk_vtoc {
+	u8			volume_name[VIO_DISK_VNAME_LEN];
+	u16			sector_size;
+	u16			num_partitions;
+	u8			ascii_label[VIO_DISK_ALABEL_LEN];
+	struct {
+		u16		id;
+		u16		perm_flags;
+		u32		resv;
+		u64		start_block;
+		u64		num_blocks;
+	} partitions[VIO_DISK_NUM_PART];
+};
+
+struct vio_disk_geom {
+	u16			num_cyl; /* Num data cylinders		*/
+	u16			alt_cyl; /* Num alternate cylinders	*/
+	u16			beg_cyl; /* Cyl off of fixed head area	*/
+	u16			num_hd;  /* Num heads			*/
+	u16			num_sec; /* Num sectors			*/
+	u16			ifact;   /* Interleave factor		*/
+	u16			apc;     /* Alts per cylinder (SCSI)	*/
+	u16			rpm;	 /* Revolutions per minute	*/
+	u16			phy_cyl; /* Num physical cylinders	*/
+	u16			wr_skip; /* Num sects to skip, writes	*/
+	u16			rd_skip; /* Num sects to skip, writes	*/
+};
+
+struct vio_disk_devid {
+	u16			resv;
+	u16			type;
+	u32			len;
+	char			id[0];
+};
+
+struct vio_disk_efi {
+	u64			lba;
+	u64			len;
+	char			data[0];
+};
+
+/* VIO net specific structures and defines */
+struct vio_net_attr_info {
+	struct vio_msg_tag	tag;
+	u8			xfer_mode;
+	u8			addr_type;
+#define VNET_ADDR_ETHERMAC	0x01
+	u16			ack_freq;
+	u32			resv1;
+	u64			addr;
+	u64			mtu;
+	u64			resv2[3];
+};
+
+#define VNET_NUM_MCAST		7
+
+struct vio_net_mcast_info {
+	struct vio_msg_tag	tag;
+	u8			set;
+	u8			count;
+	u8			mcast_addr[VNET_NUM_MCAST * 6];
+	u32			resv;
+};
+
+struct vio_net_desc {
+	struct vio_dring_hdr	hdr;
+	u32			size;
+	u32			ncookies;
+	struct ldc_trans_cookie	cookies[0];
+};
+
+#define VIO_MAX_RING_COOKIES	24
+
+struct vio_dring_state {
+	u64			ident;
+	void			*base;
+	u64			snd_nxt;
+	u64			rcv_nxt;
+	u32			entry_size;
+	u32			num_entries;
+	u32			prod;
+	u32			cons;
+	u32			pending;
+	int			ncookies;
+	struct ldc_trans_cookie	cookies[VIO_MAX_RING_COOKIES];
+};
+
+static inline void *vio_dring_cur(struct vio_dring_state *dr)
+{
+	return dr->base + (dr->entry_size * dr->prod);
+}
+
+static inline void *vio_dring_entry(struct vio_dring_state *dr,
+				    unsigned int index)
+{
+	return dr->base + (dr->entry_size * index);
+}
+
+static inline u32 vio_dring_avail(struct vio_dring_state *dr,
+				  unsigned int ring_size)
+{
+	BUILD_BUG_ON(!is_power_of_2(ring_size));
+
+	return (dr->pending -
+		((dr->prod - dr->cons) & (ring_size - 1)));
+}
+
+#define VIO_MAX_TYPE_LEN	32
+#define VIO_MAX_COMPAT_LEN	64
+
+struct vio_dev {
+	u64			mp;
+	struct device_node	*dp;
+
+	char			type[VIO_MAX_TYPE_LEN];
+	char			compat[VIO_MAX_COMPAT_LEN];
+	int			compat_len;
+
+	u64			dev_no;
+
+	unsigned long		channel_id;
+
+	unsigned int		tx_irq;
+	unsigned int		rx_irq;
+
+	struct device		dev;
+};
+
+struct vio_driver {
+	struct list_head		node;
+	const struct vio_device_id	*id_table;
+	int (*probe)(struct vio_dev *dev, const struct vio_device_id *id);
+	int (*remove)(struct vio_dev *dev);
+	void (*shutdown)(struct vio_dev *dev);
+	unsigned long			driver_data;
+	struct device_driver		driver;
+};
+
+struct vio_version {
+	u16		major;
+	u16		minor;
+};
+
+struct vio_driver_state;
+struct vio_driver_ops {
+	int	(*send_attr)(struct vio_driver_state *vio);
+	int	(*handle_attr)(struct vio_driver_state *vio, void *pkt);
+	void	(*handshake_complete)(struct vio_driver_state *vio);
+};
+
+struct vio_completion {
+	struct completion	com;
+	int			err;
+	int			waiting_for;
+};
+
+struct vio_driver_state {
+	/* Protects VIO handshake and, optionally, driver private state.  */
+	spinlock_t		lock;
+
+	struct ldc_channel	*lp;
+
+	u32			_peer_sid;
+	u32			_local_sid;
+	struct vio_dring_state	drings[2];
+#define VIO_DRIVER_TX_RING	0
+#define VIO_DRIVER_RX_RING	1
+
+	u8			hs_state;
+#define VIO_HS_INVALID		0x00
+#define VIO_HS_GOTVERS		0x01
+#define VIO_HS_GOT_ATTR		0x04
+#define VIO_HS_SENT_DREG	0x08
+#define VIO_HS_SENT_RDX		0x10
+#define VIO_HS_GOT_RDX_ACK	0x20
+#define VIO_HS_GOT_RDX		0x40
+#define VIO_HS_SENT_RDX_ACK	0x80
+#define VIO_HS_COMPLETE		(VIO_HS_GOT_RDX_ACK | VIO_HS_SENT_RDX_ACK)
+
+	u8			dev_class;
+
+	u8			dr_state;
+#define VIO_DR_STATE_TXREG	0x01
+#define VIO_DR_STATE_RXREG	0x02
+#define VIO_DR_STATE_TXREQ	0x10
+#define VIO_DR_STATE_RXREQ	0x20
+
+	u8			debug;
+#define VIO_DEBUG_HS		0x01
+#define VIO_DEBUG_DATA		0x02
+
+	void			*desc_buf;
+	unsigned int		desc_buf_len;
+
+	struct vio_completion	*cmp;
+
+	struct vio_dev		*vdev;
+
+	struct timer_list	timer;
+
+	struct vio_version	ver;
+
+	struct vio_version	*ver_table;
+	int			ver_table_entries;
+
+	char			*name;
+
+	struct vio_driver_ops	*ops;
+};
+
+#define viodbg(TYPE, f, a...) \
+do {	if (vio->debug & VIO_DEBUG_##TYPE) \
+		printk(KERN_INFO "vio: ID[%lu] " f, \
+		       vio->vdev->channel_id, ## a); \
+} while (0)
+
+extern int vio_register_driver(struct vio_driver *drv);
+extern void vio_unregister_driver(struct vio_driver *drv);
+
+static inline struct vio_driver *to_vio_driver(struct device_driver *drv)
+{
+	return container_of(drv, struct vio_driver, driver);
+}
+
+static inline struct vio_dev *to_vio_dev(struct device *dev)
+{
+	return container_of(dev, struct vio_dev, dev);
+}
+
+extern int vio_ldc_send(struct vio_driver_state *vio, void *data, int len);
+extern void vio_link_state_change(struct vio_driver_state *vio, int event);
+extern void vio_conn_reset(struct vio_driver_state *vio);
+extern int vio_control_pkt_engine(struct vio_driver_state *vio, void *pkt);
+extern int vio_validate_sid(struct vio_driver_state *vio,
+			    struct vio_msg_tag *tp);
+extern u32 vio_send_sid(struct vio_driver_state *vio);
+extern int vio_ldc_alloc(struct vio_driver_state *vio,
+			 struct ldc_channel_config *base_cfg, void *event_arg);
+extern void vio_ldc_free(struct vio_driver_state *vio);
+extern int vio_driver_init(struct vio_driver_state *vio, struct vio_dev *vdev,
+			   u8 dev_class, struct vio_version *ver_table,
+			   int ver_table_size, struct vio_driver_ops *ops,
+			   char *name);
+
+extern void vio_port_up(struct vio_driver_state *vio);
+
+#endif /* _SPARC64_VIO_H */
diff --git a/arch/sparc/include/asm/visasm.h b/arch/sparc/include/asm/visasm.h
new file mode 100644
index 000000000000..de797b9bf552
--- /dev/null
+++ b/arch/sparc/include/asm/visasm.h
@@ -0,0 +1,62 @@
+#ifndef _SPARC64_VISASM_H
+#define _SPARC64_VISASM_H
+
+/* visasm.h:  FPU saving macros for VIS routines
+ *
+ * Copyright (C) 1998 Jakub Jelinek (jj@ultra.linux.cz)
+ */
+
+#include <asm/pstate.h>
+#include <asm/ptrace.h>
+
+/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc */
+
+#define VISEntry					\
+	rd		%fprs, %o5;			\
+	andcc		%o5, (FPRS_FEF|FPRS_DU), %g0;	\
+	be,pt		%icc, 297f;			\
+	 sethi		%hi(297f), %g7;			\
+	sethi		%hi(VISenter), %g1;		\
+	jmpl		%g1 + %lo(VISenter), %g0;	\
+	 or		%g7, %lo(297f), %g7;		\
+297:	wr		%g0, FPRS_FEF, %fprs;		\
+
+#define VISExit						\
+	wr		%g0, 0, %fprs;
+
+/* Clobbers %o5, %g1, %g2, %g3, %g7, %icc, %xcc.
+ * Must preserve %o5 between VISEntryHalf and VISExitHalf */
+
+#define VISEntryHalf					\
+	rd		%fprs, %o5;			\
+	andcc		%o5, FPRS_FEF, %g0;		\
+	be,pt		%icc, 297f;			\
+	 sethi		%hi(298f), %g7;			\
+	sethi		%hi(VISenterhalf), %g1;		\
+	jmpl		%g1 + %lo(VISenterhalf), %g0;	\
+	 or		%g7, %lo(298f), %g7;		\
+	clr		%o5;				\
+297:	wr		%o5, FPRS_FEF, %fprs;		\
+298:
+
+#define VISExitHalf					\
+	wr		%o5, 0, %fprs;
+
+#ifndef __ASSEMBLY__
+static inline void save_and_clear_fpu(void) {
+	__asm__ __volatile__ (
+"		rd %%fprs, %%o5\n"
+"		andcc %%o5, %0, %%g0\n"
+"		be,pt %%icc, 299f\n"
+"		 sethi %%hi(298f), %%g7\n"
+"		sethi %%hi(VISenter), %%g1\n"
+"		jmpl %%g1 + %%lo(VISenter), %%g0\n"
+"		 or %%g7, %%lo(298f), %%g7\n"
+"	298:	wr %%g0, 0, %%fprs\n"
+"	299:\n"
+"		" : : "i" (FPRS_FEF|FPRS_DU) :
+		"o5", "g1", "g2", "g3", "g7", "cc");
+}
+#endif
+
+#endif /* _SPARC64_ASI_H */
diff --git a/arch/sparc/include/asm/watchdog.h b/arch/sparc/include/asm/watchdog.h
new file mode 100644
index 000000000000..5baf2d3919cf
--- /dev/null
+++ b/arch/sparc/include/asm/watchdog.h
@@ -0,0 +1,31 @@
+/*
+ *
+ * watchdog - Driver interface for the hardware watchdog timers
+ * present on Sun Microsystems boardsets
+ *
+ * Copyright (c) 2000 Eric Brower <ebrower@usa.net>
+ *
+ */
+
+#ifndef _SPARC64_WATCHDOG_H
+#define _SPARC64_WATCHDOG_H
+
+#include <linux/watchdog.h>
+
+/* Solaris compatibility ioctls--
+ * Ref. <linux/watchdog.h> for standard linux watchdog ioctls
+ */
+#define WIOCSTART _IO (WATCHDOG_IOCTL_BASE, 10)		/* Start Timer		*/
+#define WIOCSTOP  _IO (WATCHDOG_IOCTL_BASE, 11)		/* Stop Timer		*/
+#define WIOCGSTAT _IOR(WATCHDOG_IOCTL_BASE, 12, int)/* Get Timer Status	*/
+
+/* Status flags from WIOCGSTAT ioctl
+ */
+#define WD_FREERUN	0x01	/* timer is running, interrupts disabled	*/
+#define WD_EXPIRED	0x02	/* timer has expired						*/
+#define WD_RUNNING	0x04	/* timer is running, interrupts enabled		*/
+#define WD_STOPPED	0x08	/* timer has not been started				*/
+#define WD_SERVICED 0x10	/* timer interrupt was serviced				*/
+
+#endif /* ifndef _SPARC64_WATCHDOG_H */
+
diff --git a/arch/sparc/include/asm/winmacro.h b/arch/sparc/include/asm/winmacro.h
new file mode 100644
index 000000000000..5b0a06dc3bcb
--- /dev/null
+++ b/arch/sparc/include/asm/winmacro.h
@@ -0,0 +1,135 @@
+/*
+ * winmacro.h: Window loading-unloading macros.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_WINMACRO_H
+#define _SPARC_WINMACRO_H
+
+#include <asm/ptrace.h>
+
+/* Store the register window onto the 8-byte aligned area starting
+ * at %reg.  It might be %sp, it might not, we don't care.
+ */
+#define STORE_WINDOW(reg) \
+	std	%l0, [%reg + RW_L0]; \
+	std	%l2, [%reg + RW_L2]; \
+	std	%l4, [%reg + RW_L4]; \
+	std	%l6, [%reg + RW_L6]; \
+	std	%i0, [%reg + RW_I0]; \
+	std	%i2, [%reg + RW_I2]; \
+	std	%i4, [%reg + RW_I4]; \
+	std	%i6, [%reg + RW_I6];
+
+/* Load a register window from the area beginning at %reg. */
+#define LOAD_WINDOW(reg) \
+	ldd	[%reg + RW_L0], %l0; \
+	ldd	[%reg + RW_L2], %l2; \
+	ldd	[%reg + RW_L4], %l4; \
+	ldd	[%reg + RW_L6], %l6; \
+	ldd	[%reg + RW_I0], %i0; \
+	ldd	[%reg + RW_I2], %i2; \
+	ldd	[%reg + RW_I4], %i4; \
+	ldd	[%reg + RW_I6], %i6;
+
+/* Loading and storing struct pt_reg trap frames. */
+#define LOAD_PT_INS(base_reg) \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I0], %i0; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I2], %i2; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I4], %i4; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_I6], %i6;
+
+#define LOAD_PT_GLOBALS(base_reg) \
+        ld      [%base_reg + STACKFRAME_SZ + PT_G1], %g1; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_G2], %g2; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_G4], %g4; \
+        ldd     [%base_reg + STACKFRAME_SZ + PT_G6], %g6;
+
+#define LOAD_PT_YREG(base_reg, scratch) \
+        ld      [%base_reg + STACKFRAME_SZ + PT_Y], %scratch; \
+        wr      %scratch, 0x0, %y;
+
+#define LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
+        ld      [%base_reg + STACKFRAME_SZ + PT_PSR], %pt_psr; \
+        ld      [%base_reg + STACKFRAME_SZ + PT_PC], %pt_pc; \
+        ld      [%base_reg + STACKFRAME_SZ + PT_NPC], %pt_npc;
+
+#define LOAD_PT_ALL(base_reg, pt_psr, pt_pc, pt_npc, scratch) \
+        LOAD_PT_YREG(base_reg, scratch) \
+        LOAD_PT_INS(base_reg) \
+        LOAD_PT_GLOBALS(base_reg) \
+        LOAD_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc)
+
+#define STORE_PT_INS(base_reg) \
+        std     %i0, [%base_reg + STACKFRAME_SZ + PT_I0]; \
+        std     %i2, [%base_reg + STACKFRAME_SZ + PT_I2]; \
+        std     %i4, [%base_reg + STACKFRAME_SZ + PT_I4]; \
+        std     %i6, [%base_reg + STACKFRAME_SZ + PT_I6];
+
+#define STORE_PT_GLOBALS(base_reg) \
+        st      %g1, [%base_reg + STACKFRAME_SZ + PT_G1]; \
+        std     %g2, [%base_reg + STACKFRAME_SZ + PT_G2]; \
+        std     %g4, [%base_reg + STACKFRAME_SZ + PT_G4]; \
+        std     %g6, [%base_reg + STACKFRAME_SZ + PT_G6];
+
+#define STORE_PT_YREG(base_reg, scratch) \
+        rd      %y, %scratch; \
+        st      %scratch, [%base_reg + STACKFRAME_SZ + PT_Y];
+
+#define STORE_PT_PRIV(base_reg, pt_psr, pt_pc, pt_npc) \
+        st      %pt_psr, [%base_reg + STACKFRAME_SZ + PT_PSR]; \
+        st      %pt_pc,  [%base_reg + STACKFRAME_SZ + PT_PC]; \
+        st      %pt_npc, [%base_reg + STACKFRAME_SZ + PT_NPC];
+
+#define STORE_PT_ALL(base_reg, reg_psr, reg_pc, reg_npc, g_scratch) \
+        STORE_PT_PRIV(base_reg, reg_psr, reg_pc, reg_npc) \
+        STORE_PT_GLOBALS(base_reg) \
+        STORE_PT_YREG(base_reg, g_scratch) \
+        STORE_PT_INS(base_reg)
+
+#define SAVE_BOLIXED_USER_STACK(cur_reg, scratch) \
+        ld       [%cur_reg + TI_W_SAVED], %scratch; \
+        sll      %scratch, 2, %scratch; \
+        add      %scratch, %cur_reg, %scratch; \
+        st       %sp, [%scratch + TI_RWIN_SPTRS]; \
+        sub      %scratch, %cur_reg, %scratch; \
+        sll      %scratch, 4, %scratch; \
+        add      %scratch, %cur_reg, %scratch; \
+        STORE_WINDOW(scratch + TI_REG_WINDOW); \
+        sub      %scratch, %cur_reg, %scratch; \
+        srl      %scratch, 6, %scratch; \
+        add      %scratch, 1, %scratch; \
+        st       %scratch, [%cur_reg + TI_W_SAVED];
+
+#ifdef CONFIG_SMP
+#define LOAD_CURRENT4M(dest_reg, idreg) \
+        rd       %tbr, %idreg; \
+	sethi    %hi(current_set), %dest_reg; \
+        srl      %idreg, 10, %idreg; \
+	or       %dest_reg, %lo(current_set), %dest_reg; \
+	and      %idreg, 0xc, %idreg; \
+	ld       [%idreg + %dest_reg], %dest_reg;
+
+#define LOAD_CURRENT4D(dest_reg, idreg) \
+	lda	 [%g0] ASI_M_VIKING_TMP1, %idreg; \
+	sethi	%hi(C_LABEL(current_set)), %dest_reg; \
+	sll	%idreg, 2, %idreg; \
+	or	%dest_reg, %lo(C_LABEL(current_set)), %dest_reg; \
+	ld	[%idreg + %dest_reg], %dest_reg;
+
+/* Blackbox - take care with this... - check smp4m and smp4d before changing this. */
+#define LOAD_CURRENT(dest_reg, idreg) 					\
+	sethi	 %hi(___b_load_current), %idreg;			\
+	sethi    %hi(current_set), %dest_reg; 			\
+	sethi    %hi(boot_cpu_id4), %idreg; 			\
+	or       %dest_reg, %lo(current_set), %dest_reg; 	\
+	ldub	 [%idreg + %lo(boot_cpu_id4)], %idreg;		\
+	ld       [%idreg + %dest_reg], %dest_reg;
+#else
+#define LOAD_CURRENT(dest_reg, idreg) \
+        sethi    %hi(current_set), %idreg; \
+        ld       [%idreg + %lo(current_set)], %dest_reg;
+#endif
+
+#endif /* !(_SPARC_WINMACRO_H) */
diff --git a/arch/sparc/include/asm/xor.h b/arch/sparc/include/asm/xor.h
new file mode 100644
index 000000000000..8ed591c7db2d
--- /dev/null
+++ b/arch/sparc/include/asm/xor.h
@@ -0,0 +1,8 @@
+#ifndef ___ASM_SPARC_XOR_H
+#define ___ASM_SPARC_XOR_H
+#if defined(__sparc__) && defined(__arch64__)
+#include <asm/xor_64.h>
+#else
+#include <asm/xor_32.h>
+#endif
+#endif
diff --git a/arch/sparc/include/asm/xor_32.h b/arch/sparc/include/asm/xor_32.h
new file mode 100644
index 000000000000..44bfa0787f3f
--- /dev/null
+++ b/arch/sparc/include/asm/xor_32.h
@@ -0,0 +1,269 @@
+/*
+ * include/asm/xor.h
+ *
+ * Optimized RAID-5 checksumming functions for 32-bit Sparc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/*
+ * High speed xor_block operation for RAID4/5 utilizing the
+ * ldd/std SPARC instructions.
+ *
+ * Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz)
+ */
+
+static void
+sparc_2(unsigned long bytes, unsigned long *p1, unsigned long *p2)
+{
+	int lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		__asm__ __volatile__(
+		  "ldd [%0 + 0x00], %%g2\n\t"
+		  "ldd [%0 + 0x08], %%g4\n\t"
+		  "ldd [%0 + 0x10], %%o0\n\t"
+		  "ldd [%0 + 0x18], %%o2\n\t"
+		  "ldd [%1 + 0x00], %%o4\n\t"
+		  "ldd [%1 + 0x08], %%l0\n\t"
+		  "ldd [%1 + 0x10], %%l2\n\t"
+		  "ldd [%1 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "std %%g2, [%0 + 0x00]\n\t"
+		  "std %%g4, [%0 + 0x08]\n\t"
+		  "std %%o0, [%0 + 0x10]\n\t"
+		  "std %%o2, [%0 + 0x18]\n"
+		:
+		: "r" (p1), "r" (p2)
+		: "g2", "g3", "g4", "g5",
+		  "o0", "o1", "o2", "o3", "o4", "o5",
+		  "l0", "l1", "l2", "l3", "l4", "l5");
+		p1 += 8;
+		p2 += 8;
+	} while (--lines > 0);
+}
+
+static void
+sparc_3(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	unsigned long *p3)
+{
+	int lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		__asm__ __volatile__(
+		  "ldd [%0 + 0x00], %%g2\n\t"
+		  "ldd [%0 + 0x08], %%g4\n\t"
+		  "ldd [%0 + 0x10], %%o0\n\t"
+		  "ldd [%0 + 0x18], %%o2\n\t"
+		  "ldd [%1 + 0x00], %%o4\n\t"
+		  "ldd [%1 + 0x08], %%l0\n\t"
+		  "ldd [%1 + 0x10], %%l2\n\t"
+		  "ldd [%1 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%2 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%2 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%2 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%2 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "std %%g2, [%0 + 0x00]\n\t"
+		  "std %%g4, [%0 + 0x08]\n\t"
+		  "std %%o0, [%0 + 0x10]\n\t"
+		  "std %%o2, [%0 + 0x18]\n"
+		:
+		: "r" (p1), "r" (p2), "r" (p3)
+		: "g2", "g3", "g4", "g5",
+		  "o0", "o1", "o2", "o3", "o4", "o5",
+		  "l0", "l1", "l2", "l3", "l4", "l5");
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+	} while (--lines > 0);
+}
+
+static void
+sparc_4(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	unsigned long *p3, unsigned long *p4)
+{
+	int lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		__asm__ __volatile__(
+		  "ldd [%0 + 0x00], %%g2\n\t"
+		  "ldd [%0 + 0x08], %%g4\n\t"
+		  "ldd [%0 + 0x10], %%o0\n\t"
+		  "ldd [%0 + 0x18], %%o2\n\t"
+		  "ldd [%1 + 0x00], %%o4\n\t"
+		  "ldd [%1 + 0x08], %%l0\n\t"
+		  "ldd [%1 + 0x10], %%l2\n\t"
+		  "ldd [%1 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%2 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%2 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%2 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%2 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%3 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%3 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%3 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%3 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "std %%g2, [%0 + 0x00]\n\t"
+		  "std %%g4, [%0 + 0x08]\n\t"
+		  "std %%o0, [%0 + 0x10]\n\t"
+		  "std %%o2, [%0 + 0x18]\n"
+		:
+		: "r" (p1), "r" (p2), "r" (p3), "r" (p4)
+		: "g2", "g3", "g4", "g5",
+		  "o0", "o1", "o2", "o3", "o4", "o5",
+		  "l0", "l1", "l2", "l3", "l4", "l5");
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+	} while (--lines > 0);
+}
+
+static void
+sparc_5(unsigned long bytes, unsigned long *p1, unsigned long *p2,
+	unsigned long *p3, unsigned long *p4, unsigned long *p5)
+{
+	int lines = bytes / (sizeof (long)) / 8;
+
+	do {
+		__asm__ __volatile__(
+		  "ldd [%0 + 0x00], %%g2\n\t"
+		  "ldd [%0 + 0x08], %%g4\n\t"
+		  "ldd [%0 + 0x10], %%o0\n\t"
+		  "ldd [%0 + 0x18], %%o2\n\t"
+		  "ldd [%1 + 0x00], %%o4\n\t"
+		  "ldd [%1 + 0x08], %%l0\n\t"
+		  "ldd [%1 + 0x10], %%l2\n\t"
+		  "ldd [%1 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%2 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%2 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%2 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%2 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%3 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%3 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%3 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%3 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "ldd [%4 + 0x00], %%o4\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "ldd [%4 + 0x08], %%l0\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "ldd [%4 + 0x10], %%l2\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "ldd [%4 + 0x18], %%l4\n\t"
+		  "xor %%g2, %%o4, %%g2\n\t"
+		  "xor %%g3, %%o5, %%g3\n\t"
+		  "xor %%g4, %%l0, %%g4\n\t"
+		  "xor %%g5, %%l1, %%g5\n\t"
+		  "xor %%o0, %%l2, %%o0\n\t"
+		  "xor %%o1, %%l3, %%o1\n\t"
+		  "xor %%o2, %%l4, %%o2\n\t"
+		  "xor %%o3, %%l5, %%o3\n\t"
+		  "std %%g2, [%0 + 0x00]\n\t"
+		  "std %%g4, [%0 + 0x08]\n\t"
+		  "std %%o0, [%0 + 0x10]\n\t"
+		  "std %%o2, [%0 + 0x18]\n"
+		:
+		: "r" (p1), "r" (p2), "r" (p3), "r" (p4), "r" (p5)
+		: "g2", "g3", "g4", "g5",
+		  "o0", "o1", "o2", "o3", "o4", "o5",
+		  "l0", "l1", "l2", "l3", "l4", "l5");
+		p1 += 8;
+		p2 += 8;
+		p3 += 8;
+		p4 += 8;
+		p5 += 8;
+	} while (--lines > 0);
+}
+
+static struct xor_block_template xor_block_SPARC = {
+	.name	= "SPARC",
+	.do_2	= sparc_2,
+	.do_3	= sparc_3,
+	.do_4	= sparc_4,
+	.do_5	= sparc_5,
+};
+
+/* For grins, also test the generic routines.  */
+#include <asm-generic/xor.h>
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES				\
+	do {						\
+		xor_speed(&xor_block_8regs);		\
+		xor_speed(&xor_block_32regs);		\
+		xor_speed(&xor_block_SPARC);		\
+	} while (0)
diff --git a/arch/sparc/include/asm/xor_64.h b/arch/sparc/include/asm/xor_64.h
new file mode 100644
index 000000000000..bee4bf4be3af
--- /dev/null
+++ b/arch/sparc/include/asm/xor_64.h
@@ -0,0 +1,70 @@
+/*
+ * include/asm/xor.h
+ *
+ * High speed xor_block operation for RAID4/5 utilizing the
+ * UltraSparc Visual Instruction Set and Niagara block-init
+ * twin-load instructions.
+ *
+ * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
+ * Copyright (C) 2006 David S. Miller <davem@davemloft.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * (for example /usr/src/linux/COPYING); if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <asm/spitfire.h>
+
+extern void xor_vis_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_vis_3(unsigned long, unsigned long *, unsigned long *,
+		      unsigned long *);
+extern void xor_vis_4(unsigned long, unsigned long *, unsigned long *,
+		      unsigned long *, unsigned long *);
+extern void xor_vis_5(unsigned long, unsigned long *, unsigned long *,
+		      unsigned long *, unsigned long *, unsigned long *);
+
+/* XXX Ugh, write cheetah versions... -DaveM */
+
+static struct xor_block_template xor_block_VIS = {
+        .name	= "VIS",
+        .do_2	= xor_vis_2,
+        .do_3	= xor_vis_3,
+        .do_4	= xor_vis_4,
+        .do_5	= xor_vis_5,
+};
+
+extern void xor_niagara_2(unsigned long, unsigned long *, unsigned long *);
+extern void xor_niagara_3(unsigned long, unsigned long *, unsigned long *,
+			  unsigned long *);
+extern void xor_niagara_4(unsigned long, unsigned long *, unsigned long *,
+			  unsigned long *, unsigned long *);
+extern void xor_niagara_5(unsigned long, unsigned long *, unsigned long *,
+			  unsigned long *, unsigned long *, unsigned long *);
+
+static struct xor_block_template xor_block_niagara = {
+        .name	= "Niagara",
+        .do_2	= xor_niagara_2,
+        .do_3	= xor_niagara_3,
+        .do_4	= xor_niagara_4,
+        .do_5	= xor_niagara_5,
+};
+
+#undef XOR_TRY_TEMPLATES
+#define XOR_TRY_TEMPLATES				\
+	do {						\
+		xor_speed(&xor_block_VIS);		\
+		xor_speed(&xor_block_niagara);		\
+	} while (0)
+
+/* For VIS for everything except Niagara.  */
+#define XOR_SELECT_TEMPLATE(FASTEST) \
+	((tlb_type == hypervisor && \
+	  (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 || \
+	   sun4v_chip_type == SUN4V_CHIP_NIAGARA2)) ? \
+	 &xor_block_niagara : \
+	 &xor_block_VIS)
diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c
index 6707422c9847..5267d48fb2c6 100644
--- a/arch/sparc/kernel/apc.c
+++ b/arch/sparc/kernel/apc.c
@@ -56,7 +56,7 @@ __setup("apc=", apc_setup);
  * CPU idle callback function
  * See .../arch/sparc/kernel/process.c
  */
-void apc_swift_idle(void)
+static void apc_swift_idle(void)
 {
 #ifdef APC_DEBUG_LED
 	set_auxio(0x00, AUXIO_LED); 
@@ -85,54 +85,70 @@ static int apc_release(struct inode *inode, struct file *f)
 	return 0;
 }
 
-static int apc_ioctl(struct inode *inode, struct file *f, 
-		     unsigned int cmd, unsigned long __arg)
+static long apc_ioctl(struct file *f, unsigned int cmd, unsigned long __arg)
 {
 	__u8 inarg, __user *arg;
 
 	arg = (__u8 __user *) __arg;
+
+	lock_kernel();
+
 	switch (cmd) {
 	case APCIOCGFANCTL:
-		if (put_user(apc_readb(APC_FANCTL_REG) & APC_REGMASK, arg))
-				return -EFAULT;
+		if (put_user(apc_readb(APC_FANCTL_REG) & APC_REGMASK, arg)) {
+			unlock_kernel();
+			return -EFAULT;
+		}
 		break;
 
 	case APCIOCGCPWR:
-		if (put_user(apc_readb(APC_CPOWER_REG) & APC_REGMASK, arg))
+		if (put_user(apc_readb(APC_CPOWER_REG) & APC_REGMASK, arg)) {
+			unlock_kernel();
 			return -EFAULT;
+		}
 		break;
 
 	case APCIOCGBPORT:
-		if (put_user(apc_readb(APC_BPORT_REG) & APC_BPMASK, arg))
+		if (put_user(apc_readb(APC_BPORT_REG) & APC_BPMASK, arg)) {
+			unlock_kernel();
 			return -EFAULT;
+		}
 		break;
 
 	case APCIOCSFANCTL:
-		if (get_user(inarg, arg))
+		if (get_user(inarg, arg)) {
+			unlock_kernel();
 			return -EFAULT;
+		}
 		apc_writeb(inarg & APC_REGMASK, APC_FANCTL_REG);
 		break;
 	case APCIOCSCPWR:
-		if (get_user(inarg, arg))
+		if (get_user(inarg, arg)) {
+			unlock_kernel();
 			return -EFAULT;
+		}
 		apc_writeb(inarg & APC_REGMASK, APC_CPOWER_REG);
 		break;
 	case APCIOCSBPORT:
-		if (get_user(inarg, arg))
+		if (get_user(inarg, arg)) {
+			unlock_kernel();
 			return -EFAULT;
+		}
 		apc_writeb(inarg & APC_BPMASK, APC_BPORT_REG);
 		break;
 	default:
+		unlock_kernel();
 		return -EINVAL;
 	};
 
+	unlock_kernel();
 	return 0;
 }
 
 static const struct file_operations apc_fops = {
-	.ioctl =	apc_ioctl,
-	.open =		apc_open,
-	.release =	apc_release,
+	.unlocked_ioctl =	apc_ioctl,
+	.open =			apc_open,
+	.release =		apc_release,
 };
 
 static struct miscdevice apc_miscdev = { APC_MINOR, APC_DEVNAME, &apc_fops };
diff --git a/arch/sparc/kernel/asm-offsets.c b/arch/sparc/kernel/asm-offsets.c
index cd3f7694e9b9..b5bb99ed892c 100644
--- a/arch/sparc/kernel/asm-offsets.c
+++ b/arch/sparc/kernel/asm-offsets.c
@@ -18,18 +18,6 @@ int foo(void)
 {
 	DEFINE(AOFF_task_thread, offsetof(struct task_struct, thread));
 	BLANK();
-	/* XXX This is the stuff for sclow.S, kill it. */
-	DEFINE(AOFF_task_pid, offsetof(struct task_struct, pid));
-	DEFINE(AOFF_task_uid, offsetof(struct task_struct, uid));
-	DEFINE(AOFF_task_gid, offsetof(struct task_struct, gid));
-	DEFINE(AOFF_task_euid, offsetof(struct task_struct, euid));
-	DEFINE(AOFF_task_egid, offsetof(struct task_struct, egid));
-	/* DEFINE(THREAD_INFO, offsetof(struct task_struct, stack)); */
-	DEFINE(ASIZ_task_uid,	sizeof(current->uid));
-	DEFINE(ASIZ_task_gid,	sizeof(current->gid));
-	DEFINE(ASIZ_task_euid,	sizeof(current->euid));
-	DEFINE(ASIZ_task_egid,	sizeof(current->egid));
-	BLANK();
 	DEFINE(AOFF_thread_fork_kpsr,
 			offsetof(struct thread_struct, fork_kpsr));
 	BLANK();
diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c
index 92c6fc07e59c..97294232259c 100644
--- a/arch/sparc/kernel/ebus.c
+++ b/arch/sparc/kernel/ebus.c
@@ -69,7 +69,7 @@ static inline unsigned long ebus_alloc(size_t size)
 
 /*
  */
-int __init ebus_blacklist_irq(const char *name)
+static int __init ebus_blacklist_irq(const char *name)
 {
 	struct ebus_device_irq *dp;
 
@@ -83,8 +83,8 @@ int __init ebus_blacklist_irq(const char *name)
 	return 0;
 }
 
-void __init fill_ebus_child(struct device_node *dp,
-			    struct linux_ebus_child *dev)
+static void __init fill_ebus_child(struct device_node *dp,
+				   struct linux_ebus_child *dev)
 {
 	const int *regs;
 	const int *irqs;
@@ -144,7 +144,8 @@ void __init fill_ebus_child(struct device_node *dp,
 	}
 }
 
-void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_device *dev)
+static void __init fill_ebus_device(struct device_node *dp,
+				    struct linux_ebus_device *dev)
 {
 	const struct linux_prom_registers *regs;
 	struct linux_ebus_child *child;
diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S
index 4bcfe54f878d..e8cdf715a546 100644
--- a/arch/sparc/kernel/entry.S
+++ b/arch/sparc/kernel/entry.S
@@ -19,6 +19,7 @@
 #include <asm/vaddrs.h>
 #include <asm/memreg.h>
 #include <asm/page.h>
+#include <asm/pgtable.h>
 #ifdef CONFIG_SUN4
 #include <asm/pgtsun4.h>
 #else
@@ -1195,8 +1196,9 @@ sys_rt_sigreturn:
 	be	1f
 	 nop
 
+	add	%sp, STACKFRAME_SZ, %o0
 	call	syscall_trace
-	 nop
+	 mov	1, %o1
 
 1:
 	/* We are returning to a signal handler. */
@@ -1286,8 +1288,12 @@ linux_fast_syscall:
 	 mov	%i3, %o3
 
 linux_syscall_trace:
+	add	%sp, STACKFRAME_SZ, %o0
 	call	syscall_trace
-	 nop
+	 mov	0, %o1
+	cmp	%o0, 0
+	bne	3f
+	 mov	-ENOSYS, %o0
 	mov	%i0, %o0
 	mov	%i1, %o1
 	mov	%i2, %o2
@@ -1317,7 +1323,6 @@ linux_sparc_syscall:
 	bne	linux_fast_syscall
 	 /* Just do first insn from SAVE_ALL in the delay slot */
 
-	.globl	syscall_is_too_hard
 syscall_is_too_hard:
 	SAVE_ALL_HEAD
 	 rd	%wim, %l3
@@ -1337,6 +1342,7 @@ syscall_is_too_hard:
 	call	%l7
 	 mov	%i5, %o5
 
+3:
 	st	%o0, [%sp + STACKFRAME_SZ + PT_I0]
 
 ret_sys_call:
@@ -1374,6 +1380,8 @@ ret_sys_call:
 	 st	%l2, [%sp + STACKFRAME_SZ + PT_NPC]
 
 linux_syscall_trace2:
+	add	%sp, STACKFRAME_SZ, %o0
+	mov	1, %o1
 	call	syscall_trace
 	 add	%l1, 0x4, %l2			/* npc = npc+4 */
 	st	%l1, [%sp + STACKFRAME_SZ + PT_PC]
@@ -1544,8 +1552,7 @@ kgdb_trap_low:
 #endif
 
 	.align	4
-	.globl	__handle_exception, flush_patch_exception
-__handle_exception:
+	.globl	flush_patch_exception
 flush_patch_exception:
 	FLUSH_ALL_KERNEL_WINDOWS;
 	ldd	[%o0], %o6
diff --git a/arch/sparc/kernel/etrap.S b/arch/sparc/kernel/etrap.S
index f37d961d67a6..e806fcdc46db 100644
--- a/arch/sparc/kernel/etrap.S
+++ b/arch/sparc/kernel/etrap.S
@@ -228,7 +228,6 @@ tsetup_mmu_patchme:
 	 */
 #define glob_tmp     g1
 
-	.globl	tsetup_sun4c_stackchk
 tsetup_sun4c_stackchk:
 	/* Done by caller: andcc %sp, 0x7, %g0 */
 	bne	trap_setup_user_stack_is_bolixed
diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S
index 3bfd6085a91d..50d9a16af795 100644
--- a/arch/sparc/kernel/head.S
+++ b/arch/sparc/kernel/head.S
@@ -32,7 +32,6 @@
  */
 
 	.align 4
-        .globl  cputyp
 cputyp:
         .word   1
 
@@ -1280,7 +1279,6 @@ halt_me:
  * gets initialized in c-code so all routines can use it.
  */
 
-	.globl	prom_vector_p
 prom_vector_p:
 		.word 0
 
diff --git a/arch/sparc/kernel/idprom.c b/arch/sparc/kernel/idprom.c
index 7220562cdb34..fc511f3c4c18 100644
--- a/arch/sparc/kernel/idprom.c
+++ b/arch/sparc/kernel/idprom.c
@@ -24,7 +24,7 @@ static struct idprom idprom_buffer;
  * of the Sparc CPU and have a meaningful IDPROM machtype value that we
  * know about.  See asm-sparc/machines.h for empirical constants.
  */
-struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
+static struct Sun_Machine_Models Sun_Machines[NUM_SUN_MACHINES] = {
 /* First, Sun4's */
 { "Sun 4/100 Series", (SM_SUN4 | SM_4_110) },
 { "Sun 4/200 Series", (SM_SUN4 | SM_4_260) },
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index 7b17522f59bf..487960919f1f 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -49,13 +49,16 @@
 
 #define mmu_inval_dma_area(p, l)	/* Anton pulled it out for 2.4.0-xx */
 
-struct resource *_sparc_find_resource(struct resource *r, unsigned long);
+static struct resource *_sparc_find_resource(struct resource *r,
+					     unsigned long);
 
 static void __iomem *_sparc_ioremap(struct resource *res, u32 bus, u32 pa, int sz);
 static void __iomem *_sparc_alloc_io(unsigned int busno, unsigned long phys,
     unsigned long size, char *name);
 static void _sparc_free_io(struct resource *res);
 
+static void register_proc_sparc_ioport(void);
+
 /* This points to the next to use virtual memory for DVMA mappings */
 static struct resource _sparc_dvma = {
 	.name = "sparc_dvma", .start = DVMA_VADDR, .end = DVMA_END - 1
@@ -539,8 +542,6 @@ void __init sbus_setup_arch_props(struct sbus_bus *sbus, struct device_node *dp)
 
 int __init sbus_arch_preinit(void)
 {
-	extern void register_proc_sparc_ioport(void);
-
 	register_proc_sparc_ioport();
 
 #ifdef CONFIG_SUN4
@@ -853,8 +854,8 @@ _sparc_io_get_info(char *buf, char **start, off_t fpos, int length, int *eof,
  * XXX Too slow. Can have 8192 DVMA pages on sun4m in the worst case.
  * This probably warrants some sort of hashing.
  */
-struct resource *
-_sparc_find_resource(struct resource *root, unsigned long hit)
+static struct resource *_sparc_find_resource(struct resource *root,
+					     unsigned long hit)
 {
         struct resource *tmp;
 
@@ -865,7 +866,7 @@ _sparc_find_resource(struct resource *root, unsigned long hit)
 	return NULL;
 }
 
-void register_proc_sparc_ioport(void)
+static void register_proc_sparc_ioport(void)
 {
 #ifdef CONFIG_PROC_FS
 	create_proc_read_entry("io_map",0,NULL,_sparc_io_get_info,&sparc_iomap);
diff --git a/arch/sparc/kernel/irq.c b/arch/sparc/kernel/irq.c
index 087390b092b0..93e1d1c65290 100644
--- a/arch/sparc/kernel/irq.c
+++ b/arch/sparc/kernel/irq.c
@@ -154,7 +154,7 @@ void (*sparc_init_timers)(irq_handler_t ) =
 struct irqaction static_irqaction[MAX_STATIC_ALLOC];
 int static_irq_count;
 
-struct {
+static struct {
 	struct irqaction *action;
 	int flags;
 } sparc_irq[NR_IRQS];
diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c
index da48d248cc17..4bb430940a61 100644
--- a/arch/sparc/kernel/process.c
+++ b/arch/sparc/kernel/process.c
@@ -1,6 +1,6 @@
 /*  linux/arch/sparc/kernel/process.c
  *
- *  Copyright (C) 1995 David S. Miller (davem@davemloft.net)
+ *  Copyright (C) 1995, 2008 David S. Miller (davem@davemloft.net)
  *  Copyright (C) 1996 Eddie C. Dost   (ecd@skynet.be)
  */
 
@@ -14,7 +14,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/kallsyms.h>
 #include <linux/mm.h>
 #include <linux/stddef.h>
 #include <linux/ptrace.h>
@@ -177,6 +176,8 @@ void machine_power_off(void)
 	machine_halt();
 }
 
+#if 0
+
 static DEFINE_SPINLOCK(sparc_backtrace_lock);
 
 void __show_backtrace(unsigned long fp)
@@ -196,7 +197,7 @@ void __show_backtrace(unsigned long fp)
 		       rw->ins[4], rw->ins[5],
 		       rw->ins[6],
 		       rw->ins[7]);
-		print_symbol("%s\n", rw->ins[7]);
+		printk("%pS\n", (void *) rw->ins[7]);
 		rw = (struct reg_window *) rw->ins[6];
 	}
 	spin_unlock_irqrestore(&sparc_backtrace_lock, flags);
@@ -228,7 +229,6 @@ void smp_show_backtrace_all_cpus(void)
 }
 #endif
 
-#if 0
 void show_stackframe(struct sparc_stackf *sf)
 {
 	unsigned long size;
@@ -264,14 +264,14 @@ void show_regs(struct pt_regs *r)
 
         printk("PSR: %08lx PC: %08lx NPC: %08lx Y: %08lx    %s\n",
 	       r->psr, r->pc, r->npc, r->y, print_tainted());
-	print_symbol("PC: <%s>\n", r->pc);
+	printk("PC: <%pS>\n", (void *) r->pc);
 	printk("%%G: %08lx %08lx  %08lx %08lx  %08lx %08lx  %08lx %08lx\n",
 	       r->u_regs[0], r->u_regs[1], r->u_regs[2], r->u_regs[3],
 	       r->u_regs[4], r->u_regs[5], r->u_regs[6], r->u_regs[7]);
 	printk("%%O: %08lx %08lx  %08lx %08lx  %08lx %08lx  %08lx %08lx\n",
 	       r->u_regs[8], r->u_regs[9], r->u_regs[10], r->u_regs[11],
 	       r->u_regs[12], r->u_regs[13], r->u_regs[14], r->u_regs[15]);
-	print_symbol("RPC: <%s>\n", r->u_regs[15]);
+	printk("RPC: <%pS>\n", (void *) r->u_regs[15]);
 
 	printk("%%L: %08lx %08lx  %08lx %08lx  %08lx %08lx  %08lx %08lx\n",
 	       rw->locals[0], rw->locals[1], rw->locals[2], rw->locals[3],
@@ -306,7 +306,7 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
 		rw = (struct reg_window *) fp;
 		pc = rw->ins[7];
 		printk("[%08lx : ", pc);
-		print_symbol("%s ] ", pc);
+		printk("%pS ] ", (void *) pc);
 		fp = rw->ins[6];
 	} while (++count < 16);
 	printk("\n");
diff --git a/arch/sparc/kernel/ptrace.c b/arch/sparc/kernel/ptrace.c
index 81f3b929743f..20699c701412 100644
--- a/arch/sparc/kernel/ptrace.c
+++ b/arch/sparc/kernel/ptrace.c
@@ -21,6 +21,7 @@
 #include <linux/signal.h>
 #include <linux/regset.h>
 #include <linux/elf.h>
+#include <linux/tracehook.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -450,21 +451,16 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-asmlinkage void syscall_trace(void)
+asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 {
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig (current->exit_code, current, 1);
-		current->exit_code = 0;
+	int ret = 0;
+
+	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
+		if (syscall_exit_p)
+			tracehook_report_syscall_exit(regs, 0);
+		else
+			ret = tracehook_report_syscall_entry(regs);
 	}
+
+	return ret;
 }
diff --git a/arch/sparc/kernel/rtrap.S b/arch/sparc/kernel/rtrap.S
index ce30082ab266..4da2e1f66290 100644
--- a/arch/sparc/kernel/rtrap.S
+++ b/arch/sparc/kernel/rtrap.S
@@ -69,12 +69,13 @@ ret_trap_lockless_ipi:
 
 	ld	[%curptr + TI_FLAGS], %g2
 signal_p:
-	andcc	%g2, (_TIF_SIGPENDING|_TIF_RESTORE_SIGMASK), %g0
+	andcc	%g2, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 	bz,a	ret_trap_continue
 	 ld	[%sp + STACKFRAME_SZ + PT_PSR], %t_psr
 
+	mov	%g2, %o2
 	mov	%l5, %o1
-	call	do_signal
+	call	do_notify_resume
 	 add	%sp, STACKFRAME_SZ, %o0	! pt_regs ptr
 
 	/* Fall through. */
@@ -224,8 +225,6 @@ ret_trap_user_stack_is_bolixed:
 	b	signal_p
 	 ld	[%curptr + TI_FLAGS], %g2
 
-
-	.globl	sun4c_rett_stackchk
 sun4c_rett_stackchk:
 	be	1f
 	 and	%fp, 0xfff, %g1		! delay slot
diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c
index a0ea0bc6f471..9e451b21202e 100644
--- a/arch/sparc/kernel/setup.c
+++ b/arch/sparc/kernel/setup.c
@@ -67,7 +67,7 @@ struct screen_info screen_info = {
 extern unsigned long trapbase;
 
 /* Pretty sick eh? */
-void prom_sync_me(void)
+static void prom_sync_me(void)
 {
 	unsigned long prom_tbr, flags;
 
@@ -97,7 +97,7 @@ void prom_sync_me(void)
 	return;
 }
 
-unsigned int boot_flags __initdata = 0;
+static unsigned int boot_flags __initdata = 0;
 #define BOOTME_DEBUG  0x1
 
 /* Exported for mm/init.c:paging_init. */
diff --git a/arch/sparc/kernel/signal.c b/arch/sparc/kernel/signal.c
index 3fd1df9f9ba7..c94f91c8b6e0 100644
--- a/arch/sparc/kernel/signal.c
+++ b/arch/sparc/kernel/signal.c
@@ -18,6 +18,7 @@
 #include <linux/smp.h>
 #include <linux/binfmts.h>	/* do_coredum */
 #include <linux/bitops.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
@@ -513,7 +514,7 @@ static inline void syscall_restart(unsigned long orig_i0, struct pt_regs *regs,
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
  * mistake.
  */
-asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
+static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 {
 	struct k_sigaction ka;
 	int restart_syscall;
@@ -552,6 +553,8 @@ asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
 		 */
 		if (test_thread_flag(TIF_RESTORE_SIGMASK))
 			clear_thread_flag(TIF_RESTORE_SIGMASK);
+
+		tracehook_signal_handler(signr, &info, &ka, regs, 0);
 		return;
 	}
 	if (restart_syscall &&
@@ -579,6 +582,17 @@ asmlinkage void do_signal(struct pt_regs * regs, unsigned long orig_i0)
 	}
 }
 
+void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0,
+		      unsigned long thread_info_flags)
+{
+	if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+		do_signal(regs, orig_i0);
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
+}
+
 asmlinkage int
 do_sys_sigstack(struct sigstack __user *ssptr, struct sigstack __user *ossptr,
 		unsigned long sp)
diff --git a/arch/sparc/kernel/smp.c b/arch/sparc/kernel/smp.c
index 6724ab90f82b..1619ec15c099 100644
--- a/arch/sparc/kernel/smp.c
+++ b/arch/sparc/kernel/smp.c
@@ -35,13 +35,9 @@
 
 #include "irq.h"
 
-int smp_num_cpus = 1;
 volatile unsigned long cpu_callin_map[NR_CPUS] __initdata = {0,};
 unsigned char boot_cpu_id = 0;
 unsigned char boot_cpu_id4 = 0; /* boot_cpu_id << 2 */
-int smp_activated = 0;
-volatile int __cpu_number_map[NR_CPUS];
-volatile int __cpu_logical_map[NR_CPUS];
 
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
@@ -55,9 +51,6 @@ cpumask_t smp_commenced_mask = CPU_MASK_NONE;
  * instruction which is much better...
  */
 
-/* Used to make bitops atomic */
-unsigned char bitops_spinlock = 0;
-
 void __cpuinit smp_store_cpu_info(int id)
 {
 	int cpu_node;
diff --git a/arch/sparc/kernel/sun4c_irq.c b/arch/sparc/kernel/sun4c_irq.c
index c6ac9fc52563..340fc395fe2d 100644
--- a/arch/sparc/kernel/sun4c_irq.c
+++ b/arch/sparc/kernel/sun4c_irq.c
@@ -68,7 +68,8 @@ unsigned char *interrupt_enable = NULL;
 
 static int sun4c_pil_map[] = { 0, 1, 2, 3, 5, 7, 8, 9 };
 
-unsigned int sun4c_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint)
+static unsigned int sun4c_sbint_to_irq(struct sbus_dev *sdev,
+				       unsigned int sbint)
 {
 	if (sbint >= sizeof(sun4c_pil_map)) {
 		printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index 8ac5661cafff..1290b5998f83 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -52,13 +52,13 @@ extern struct irqaction static_irqaction[MAX_STATIC_ALLOC];
 extern int static_irq_count;
 unsigned char cpu_leds[32];
 #ifdef CONFIG_SMP
-unsigned char sbus_tid[32];
+static unsigned char sbus_tid[32];
 #endif
 
 static struct irqaction *irq_action[NR_IRQS];
 extern spinlock_t irq_action_lock;
 
-struct sbus_action {
+static struct sbus_action {
 	struct irqaction *action;
 	/* For SMP this needs to be extended */
 } *sbus_actions;
@@ -267,7 +267,8 @@ unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq)
 		return irq;
 }
 
-unsigned int sun4d_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint)
+static unsigned int sun4d_sbint_to_irq(struct sbus_dev *sdev,
+				       unsigned int sbint)
 {
 	if (sbint >= sizeof(sbus_to_pil)) {
 		printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
index b92d6d2d5b04..94e02de960ea 100644
--- a/arch/sparc/kernel/sun4m_irq.c
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -154,7 +154,8 @@ static unsigned long irq_mask[] = {
 
 static int sun4m_pil_map[] = { 0, 2, 3, 5, 7, 9, 11, 13 };
 
-unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint) 
+static unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev,
+				       unsigned int sbint)
 {
 	if (sbint >= sizeof(sun4m_pil_map)) {
 		printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
@@ -163,7 +164,7 @@ unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint)
 	return sun4m_pil_map[sbint] | 0x30;
 }
 
-inline unsigned long sun4m_get_irqmask(unsigned int irq)
+static unsigned long sun4m_get_irqmask(unsigned int irq)
 {
 	unsigned long mask;
     
@@ -281,7 +282,7 @@ static void sun4m_set_udt(int cpu)
 #define TIMER_IRQ  	(OBIO_INTR | 10)
 #define PROFILE_IRQ	(OBIO_INTR | 14)
 
-struct sun4m_timer_regs *sun4m_timers;
+static struct sun4m_timer_regs *sun4m_timers;
 unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10);
 
 static void sun4m_clear_clock_irq(void)
diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c
index ffb875aacb7e..406ac1abc83a 100644
--- a/arch/sparc/kernel/sun4m_smp.c
+++ b/arch/sparc/kernel/sun4m_smp.c
@@ -244,8 +244,9 @@ static struct smp_funcall {
 static DEFINE_SPINLOCK(cross_call_lock);
 
 /* Cross calls must be serialized, at least currently. */
-void smp4m_cross_call(smpfunc_t func, unsigned long arg1, unsigned long arg2,
-		    unsigned long arg3, unsigned long arg4, unsigned long arg5)
+static void smp4m_cross_call(smpfunc_t func, unsigned long arg1,
+			     unsigned long arg2, unsigned long arg3,
+			     unsigned long arg4, unsigned long arg5)
 {
 		register int ncpus = SUN4M_NCPUS;
 		unsigned long flags;
@@ -344,7 +345,7 @@ static void __init smp_setup_percpu_timer(void)
 		enable_pil_irq(14);
 }
 
-void __init smp4m_blackbox_id(unsigned *addr)
+static void __init smp4m_blackbox_id(unsigned *addr)
 {
 	int rd = *addr & 0x3e000000;
 	int rs1 = rd >> 11;
@@ -354,7 +355,7 @@ void __init smp4m_blackbox_id(unsigned *addr)
 	addr[2] = 0x80082003 | rd | rs1;	/* and reg, 3, reg */
 }
 
-void __init smp4m_blackbox_current(unsigned *addr)
+static void __init smp4m_blackbox_current(unsigned *addr)
 {
 	int rd = *addr & 0x3e000000;
 	int rs1 = rd >> 11;
diff --git a/arch/sparc/kernel/sys_sparc.c b/arch/sparc/kernel/sys_sparc.c
index 3c6b49a53ae8..4d73421559c3 100644
--- a/arch/sparc/kernel/sys_sparc.c
+++ b/arch/sparc/kernel/sys_sparc.c
@@ -97,7 +97,7 @@ asmlinkage int sparc_pipe(struct pt_regs *regs)
 	int fd[2];
 	int error;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (error)
 		goto out;
 	regs->u_regs[UREG_I1] = fd[1];
diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S
index 5a7c4c8345c3..e1b9233b90ab 100644
--- a/arch/sparc/kernel/systbls.S
+++ b/arch/sparc/kernel/systbls.S
@@ -80,4 +80,5 @@ sys_call_table:
 /*300*/	.long sys_set_robust_list, sys_get_robust_list, sys_migrate_pages, sys_mbind, sys_get_mempolicy
 /*305*/	.long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/	.long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
-/*315*/	.long sys_timerfd_settime, sys_timerfd_gettime
+/*315*/	.long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1
diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c
index 53caacbb3982..ab3dd0b257d3 100644
--- a/arch/sparc/kernel/time.c
+++ b/arch/sparc/kernel/time.c
@@ -46,7 +46,7 @@
 #include "irq.h"
 
 DEFINE_SPINLOCK(rtc_lock);
-enum sparc_clock_type sp_clock_typ;
+static enum sparc_clock_type sp_clock_typ;
 DEFINE_SPINLOCK(mostek_lock);
 void __iomem *mstk48t02_regs = NULL;
 static struct mostek48t08 __iomem *mstk48t08_regs = NULL;
@@ -366,7 +366,7 @@ static int __init clock_init(void)
 fs_initcall(clock_init);
 #endif /* !CONFIG_SUN4 */
 
-void __init sbus_time_init(void)
+static void __init sbus_time_init(void)
 {
 
 	BTFIXUPSET_CALL(bus_do_settimeofday, sbus_do_settimeofday, BTFIXUPCALL_NORM);
diff --git a/arch/sparc/kernel/traps.c b/arch/sparc/kernel/traps.c
index 978e9d85949e..5d45d5fd8c99 100644
--- a/arch/sparc/kernel/traps.c
+++ b/arch/sparc/kernel/traps.c
@@ -1,7 +1,7 @@
 /*
  * arch/sparc/kernel/traps.c
  *
- * Copyright 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright 1995, 2008 David S. Miller (davem@davemloft.net)
  * Copyright 2000 Jakub Jelinek (jakub@redhat.com)
  */
 
@@ -11,7 +11,6 @@
 
 #include <linux/sched.h>  /* for jiffies */
 #include <linux/kernel.h>
-#include <linux/kallsyms.h>
 #include <linux/signal.h>
 #include <linux/smp.h>
 #include <linux/smp_lock.h>
@@ -33,9 +32,6 @@ struct trap_trace_entry {
 	unsigned long type;
 };
 
-int trap_curbuf = 0;
-struct trap_trace_entry trapbuf[1024];
-
 void syscall_trace_entry(struct pt_regs *regs)
 {
 	printk("%s[%d]: ", current->comm, task_pid_nr(current));
@@ -72,7 +68,7 @@ void sun4d_nmi(struct pt_regs *regs)
 	prom_halt();
 }
 
-void instruction_dump (unsigned long *pc)
+static void instruction_dump(unsigned long *pc)
 {
 	int i;
 	
@@ -119,8 +115,8 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 		      count++ < 30				&&
                       (((unsigned long) rw) >= PAGE_OFFSET)	&&
 		      !(((unsigned long) rw) & 0x7)) {
-			printk("Caller[%08lx]", rw->ins[7]);
-			print_symbol(": %s\n", rw->ins[7]);
+			printk("Caller[%08lx]: %pS\n", rw->ins[7],
+			       (void *) rw->ins[7]);
 			rw = (struct reg_window *)rw->ins[6];
 		}
 	}
@@ -479,10 +475,6 @@ void do_BUG(const char *file, int line)
 
 extern void sparc_cpu_startup(void);
 
-int linux_smp_still_initting;
-unsigned int thiscpus_tbr;
-int thiscpus_mid;
-
 void trap_init(void)
 {
 	extern void thread_info_offsets_are_bolixed_pete(void);
diff --git a/arch/sparc/kernel/wof.S b/arch/sparc/kernel/wof.S
index 4bce38dfe3c5..3bbcd8dc9abf 100644
--- a/arch/sparc/kernel/wof.S
+++ b/arch/sparc/kernel/wof.S
@@ -306,7 +306,6 @@ spwin_bad_ustack_from_kernel:
  * As noted above %curptr cannot be touched by this routine at all.
  */
 
-	.globl	spwin_sun4c_stackchk
 spwin_sun4c_stackchk:
 	/* LOCATION: Window to be saved on the stack */
 
diff --git a/arch/sparc/kernel/wuf.S b/arch/sparc/kernel/wuf.S
index 82e5145b0f77..779ff750603d 100644
--- a/arch/sparc/kernel/wuf.S
+++ b/arch/sparc/kernel/wuf.S
@@ -243,7 +243,6 @@ fwin_user_finish_up:
 	 */
 
 	.align	4
-	.globl	sun4c_fwin_stackchk
 sun4c_fwin_stackchk:
 	/* LOCATION: Window 'W' */
 
diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c
index 0a3cd8f6cfe4..3604c2e86709 100644
--- a/arch/sparc/mm/fault.c
+++ b/arch/sparc/mm/fault.c
@@ -451,7 +451,7 @@ asmlinkage void do_sun4c_fault(struct pt_regs *regs, int text_fault, int write,
 }
 
 /* This always deals with user addresses. */
-inline void force_user_fault(unsigned long address, int write)
+static void force_user_fault(unsigned long address, int write)
 {
 	struct vm_area_struct *vma;
 	struct task_struct *tsk = current;
diff --git a/arch/sparc/mm/init.c b/arch/sparc/mm/init.c
index 7794ecb896e3..e103f1bb3777 100644
--- a/arch/sparc/mm/init.c
+++ b/arch/sparc/mm/init.c
@@ -22,6 +22,7 @@
 #include <linux/init.h>
 #include <linux/highmem.h>
 #include <linux/bootmem.h>
+#include <linux/pagemap.h>
 
 #include <asm/system.h>
 #include <asm/vac-ops.h>
@@ -128,7 +129,7 @@ unsigned long calc_highpages(void)
 	return nr;
 }
 
-unsigned long calc_max_low_pfn(void)
+static unsigned long calc_max_low_pfn(void)
 {
 	int i;
 	unsigned long tmp = pfn_base + (SRMMU_MAXMEM >> PAGE_SHIFT);
@@ -292,7 +293,7 @@ unsigned long __init bootmem_init(unsigned long *pages_avail)
  *
  * We simply copy the 2.4 implementation for now.
  */
-int pgt_cache_water[2] = { 25, 50 };
+static int pgt_cache_water[2] = { 25, 50 };
 
 void check_pgt_cache(void)
 {
@@ -356,8 +357,6 @@ void __init paging_init(void)
 	device_scan();
 }
 
-struct cache_palias *sparc_aliases;
-
 static void __init taint_real_pages(void)
 {
 	int i;
@@ -375,7 +374,7 @@ static void __init taint_real_pages(void)
 	}
 }
 
-void map_high_region(unsigned long start_pfn, unsigned long end_pfn)
+static void map_high_region(unsigned long start_pfn, unsigned long end_pfn)
 {
 	unsigned long tmp;
 
diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c
index 23d3291a3e81..ee30462598fc 100644
--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -50,7 +50,7 @@
 #include <asm/btfixup.h>
 
 enum mbus_module srmmu_modtype;
-unsigned int hwbug_bitmask;
+static unsigned int hwbug_bitmask;
 int vac_cache_size;
 int vac_line_size;
 
@@ -60,7 +60,7 @@ extern unsigned long last_valid_pfn;
 
 extern unsigned long page_kernel;
 
-pgd_t *srmmu_swapper_pg_dir;
+static pgd_t *srmmu_swapper_pg_dir;
 
 #ifdef CONFIG_SMP
 #define FLUSH_BEGIN(mm)
@@ -83,12 +83,12 @@ BTFIXUPDEF_CALL(void, local_flush_page_for_dma, unsigned long)
 char *srmmu_name;
 
 ctxd_t *srmmu_ctx_table_phys;
-ctxd_t *srmmu_context_table;
+static ctxd_t *srmmu_context_table;
 
 int viking_mxcc_present;
 static DEFINE_SPINLOCK(srmmu_context_spinlock);
 
-int is_hypersparc;
+static int is_hypersparc;
 
 /*
  * In general all page table modifications should use the V8 atomic
@@ -112,11 +112,11 @@ static inline int srmmu_device_memory(unsigned long x)
 	return ((x & 0xF0000000) != 0);
 }
 
-int srmmu_cache_pagetables;
+static int srmmu_cache_pagetables;
 
 /* these will be initialized in srmmu_nocache_calcsize() */
-unsigned long srmmu_nocache_size;
-unsigned long srmmu_nocache_end;
+static unsigned long srmmu_nocache_size;
+static unsigned long srmmu_nocache_end;
 
 /* 1 bit <=> 256 bytes of nocache <=> 64 PTEs */
 #define SRMMU_NOCACHE_BITMAP_SHIFT (PAGE_SHIFT - 4)
@@ -324,7 +324,7 @@ static unsigned long __srmmu_get_nocache(int size, int align)
 	return (SRMMU_NOCACHE_VADDR + (offset << SRMMU_NOCACHE_BITMAP_SHIFT));
 }
 
-unsigned inline long srmmu_get_nocache(int size, int align)
+static unsigned long srmmu_get_nocache(int size, int align)
 {
 	unsigned long tmp;
 
@@ -336,7 +336,7 @@ unsigned inline long srmmu_get_nocache(int size, int align)
 	return tmp;
 }
 
-void srmmu_free_nocache(unsigned long vaddr, int size)
+static void srmmu_free_nocache(unsigned long vaddr, int size)
 {
 	int offset;
 
@@ -369,7 +369,8 @@ void srmmu_free_nocache(unsigned long vaddr, int size)
 	bit_map_clear(&srmmu_nocache_map, offset, size);
 }
 
-void srmmu_early_allocate_ptable_skeleton(unsigned long start, unsigned long end);
+static void srmmu_early_allocate_ptable_skeleton(unsigned long start,
+						 unsigned long end);
 
 extern unsigned long probe_memory(void);	/* in fault.c */
 
@@ -377,7 +378,7 @@ extern unsigned long probe_memory(void);	/* in fault.c */
  * Reserve nocache dynamically proportionally to the amount of
  * system RAM. -- Tomas Szepe <szepe@pinerecords.com>, June 2002
  */
-void srmmu_nocache_calcsize(void)
+static void srmmu_nocache_calcsize(void)
 {
 	unsigned long sysmemavail = probe_memory() / 1024;
 	int srmmu_nocache_npages;
@@ -398,7 +399,7 @@ void srmmu_nocache_calcsize(void)
 	srmmu_nocache_end = SRMMU_NOCACHE_VADDR + srmmu_nocache_size;
 }
 
-void __init srmmu_nocache_init(void)
+static void __init srmmu_nocache_init(void)
 {
 	unsigned int bitmap_bits;
 	pgd_t *pgd;
@@ -645,7 +646,7 @@ static void srmmu_unmapiorange(unsigned long virt_addr, unsigned int len)
  * mappings on the kernel stack without any special code as we did
  * need on the sun4c.
  */
-struct thread_info *srmmu_alloc_thread_info(void)
+static struct thread_info *srmmu_alloc_thread_info(void)
 {
 	struct thread_info *ret;
 
@@ -1045,13 +1046,14 @@ extern void hypersparc_setup_blockops(void);
  *       around 8mb mapped for us.
  */
 
-void __init early_pgtable_allocfail(char *type)
+static void __init early_pgtable_allocfail(char *type)
 {
 	prom_printf("inherit_prom_mappings: Cannot alloc kernel %s.\n", type);
 	prom_halt();
 }
 
-void __init srmmu_early_allocate_ptable_skeleton(unsigned long start, unsigned long end)
+static void __init srmmu_early_allocate_ptable_skeleton(unsigned long start,
+							unsigned long end)
 {
 	pgd_t *pgdp;
 	pmd_t *pmdp;
@@ -1081,7 +1083,8 @@ void __init srmmu_early_allocate_ptable_skeleton(unsigned long start, unsigned l
 	}
 }
 
-void __init srmmu_allocate_ptable_skeleton(unsigned long start, unsigned long end)
+static void __init srmmu_allocate_ptable_skeleton(unsigned long start,
+						  unsigned long end)
 {
 	pgd_t *pgdp;
 	pmd_t *pmdp;
@@ -1116,7 +1119,8 @@ void __init srmmu_allocate_ptable_skeleton(unsigned long start, unsigned long en
  * looking at the prom's page table directly which is what most
  * other OS's do.  Yuck... this is much better.
  */
-void __init srmmu_inherit_prom_mappings(unsigned long start,unsigned long end)
+static void __init srmmu_inherit_prom_mappings(unsigned long start,
+					       unsigned long end)
 {
 	pgd_t *pgdp;
 	pmd_t *pmdp;
@@ -1348,8 +1352,7 @@ void __init srmmu_paging_init(void)
 		zones_size[ZONE_HIGHMEM] = npages;
 		zholes_size[ZONE_HIGHMEM] = npages - calc_highpages();
 
-		free_area_init_node(0, &contig_page_data, zones_size,
-				    pfn_base, zholes_size);
+		free_area_init_node(0, zones_size, pfn_base, zholes_size);
 	}
 }
 
diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c
index 2375fe9dc312..d1782f6368be 100644
--- a/arch/sparc/mm/sun4c.c
+++ b/arch/sparc/mm/sun4c.c
@@ -2123,8 +2123,7 @@ void __init sun4c_paging_init(void)
 		zones_size[ZONE_HIGHMEM] = npages;
 		zholes_size[ZONE_HIGHMEM] = npages - calc_highpages();
 
-		free_area_init_node(0, &contig_page_data, zones_size,
-				    pfn_base, zholes_size);
+		free_area_init_node(0, zones_size, pfn_base, zholes_size);
 	}
 
 	cnt = 0;
diff --git a/arch/sparc/mm/tsunami.S b/arch/sparc/mm/tsunami.S
index db0d6de33a87..4e55e8f76648 100644
--- a/arch/sparc/mm/tsunami.S
+++ b/arch/sparc/mm/tsunami.S
@@ -93,7 +93,6 @@ tsunami_flush_tlb_page_out:
 	ldd	[src + offset + 0x00], t2; \
 	std	t2, [dst + offset + 0x00];
 
-	.globl	tsunami_copy_1page
 tsunami_copy_1page:
 /* NOTE: This routine has to be shorter than 70insns --jj */
 	or	%g0, (PAGE_SIZE >> 8), %g1
diff --git a/arch/sparc64/Kconfig b/arch/sparc64/Kconfig
index fca9246470b1..923a98959fa7 100644
--- a/arch/sparc64/Kconfig
+++ b/arch/sparc64/Kconfig
@@ -16,6 +16,8 @@ config SPARC64
 	select HAVE_IDE
 	select HAVE_LMB
 	select HAVE_ARCH_KGDB
+	select USE_GENERIC_SMP_HELPERS if SMP
+	select HAVE_ARCH_TRACEHOOK
 
 config GENERIC_TIME
 	bool
@@ -81,6 +83,10 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	def_bool y
 
+source "init/Kconfig"
+
+menu "Processor type and features"
+
 choice
 	prompt "Kernel page size"
 	default SPARC64_PAGE_SIZE_8KB
@@ -93,19 +99,11 @@ config SPARC64_PAGE_SIZE_8KB
 	  8KB and 64KB work quite well, since SPARC ELF sections
 	  provide for up to 64KB alignment.
 
-	  Therefore, 512KB and 4MB are for expert hackers only.
-
 	  If you don't know what to do, choose 8KB.
 
 config SPARC64_PAGE_SIZE_64KB
 	bool "64KB"
 
-config SPARC64_PAGE_SIZE_512KB
-	bool "512KB"
-
-config SPARC64_PAGE_SIZE_4MB
-	bool "4MB"
-
 endchoice
 
 config SECCOMP
@@ -136,14 +134,10 @@ config HOTPLUG_CPU
 	  can be controlled through /sys/devices/system/cpu/cpu#.
 	  Say N if you want to disable CPU hotplug.
 
-source "init/Kconfig"
-
 config GENERIC_HARDIRQS
 	bool
 	default y
 
-menu "General machine setup"
-
 source "kernel/time/Kconfig"
 
 config SMP
@@ -225,11 +219,10 @@ config HUGETLB_PAGE_SIZE_4MB
 	bool "4MB"
 
 config HUGETLB_PAGE_SIZE_512K
-	depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB
 	bool "512K"
 
 config HUGETLB_PAGE_SIZE_64K
-	depends on !SPARC64_PAGE_SIZE_4MB && !SPARC64_PAGE_SIZE_512KB && !SPARC64_PAGE_SIZE_64KB
+	depends on !SPARC64_PAGE_SIZE_64KB
 	bool "64K"
 
 endchoice
diff --git a/arch/sparc64/Makefile b/arch/sparc64/Makefile
index 4b8f2b084c21..b785a395b12f 100644
--- a/arch/sparc64/Makefile
+++ b/arch/sparc64/Makefile
@@ -9,7 +9,9 @@
 
 CHECKFLAGS	+= -D__sparc__ -D__sparc_v9__ -m64
 
-CPPFLAGS_vmlinux.lds += -Usparc
+# Undefine sparc when processing vmlinux.lds - it is used
+# And teach CPP we are doing 64 bit builds (for this case)
+CPPFLAGS_vmlinux.lds += -m64 -Usparc
 
 LDFLAGS		:= -m elf64_sparc
 
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index 76eb832527f2..82cab5cc8070 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc2
-# Fri May 16 13:36:07 2008
+# Linux kernel version: 2.6.26
+# Fri Jul 18 00:47:07 2008
 #
 CONFIG_SPARC=y
 CONFIG_SPARC64=y
@@ -22,18 +22,6 @@ CONFIG_HAVE_SETUP_PER_CPU_AREA=y
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_OF=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_SPARC64_PAGE_SIZE_8KB=y
-# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
-# CONFIG_SPARC64_PAGE_SIZE_512KB is not set
-# CONFIG_SPARC64_PAGE_SIZE_4MB is not set
-CONFIG_SECCOMP=y
-CONFIG_HZ_100=y
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=100
-# CONFIG_SCHED_HRTICK is not set
-CONFIG_HOTPLUG_CPU=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -105,6 +93,7 @@ CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 # CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -121,6 +110,7 @@ CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
 CONFIG_BLK_DEV_IO_TRACE=y
 CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
 CONFIG_BLOCK_COMPAT=y
 
 #
@@ -136,11 +126,21 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_CLASSIC_RCU=y
-CONFIG_GENERIC_HARDIRQS=y
 
 #
-# General machine setup
+# Processor type and features
 #
+CONFIG_SPARC64_PAGE_SIZE_8KB=y
+# CONFIG_SPARC64_PAGE_SIZE_64KB is not set
+CONFIG_SECCOMP=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_HOTPLUG_CPU=y
+CONFIG_GENERIC_HARDIRQS=y
 CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -342,6 +342,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -366,6 +368,7 @@ CONFIG_CDROM_PKTCDVD_BUFFERS=8
 CONFIG_CDROM_PKTCDVD_WCACHE=y
 CONFIG_ATA_OVER_ETH=m
 CONFIG_SUNVDC=m
+# CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
 # CONFIG_EEPROM_93CX6 is not set
@@ -379,6 +382,7 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
+CONFIG_IDE_TIMINGS=y
 # CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
@@ -429,8 +433,6 @@ CONFIG_BLK_DEV_ALI15X3=y
 # CONFIG_BLK_DEV_VIA82CXXX is not set
 # CONFIG_BLK_DEV_TC86C001 is not set
 CONFIG_BLK_DEV_IDEDMA=y
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
@@ -504,6 +506,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SUNESP is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
@@ -529,6 +532,10 @@ CONFIG_DM_ZERO=m
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
@@ -745,7 +752,8 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_N2RNG=m
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -759,38 +767,58 @@ CONFIG_I2C_ALGOBIT=y
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
+# CONFIG_AT24 is not set
 # CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
@@ -856,6 +884,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 
 #
@@ -985,15 +1014,7 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_LOGO_SUN_CLUT224=y
-
-#
-# Sound
-#
 CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1010,21 +1031,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
+CONFIG_SND_VMASTER=y
 CONFIG_SND_MPU401_UART=m
 CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
 CONFIG_SND_DUMMY=m
 CONFIG_SND_VIRMIDI=m
 CONFIG_SND_MTPAV=m
 # CONFIG_SND_SERIAL_U16550 is not set
 # CONFIG_SND_MPU401 is not set
-
-#
-# PCI devices
-#
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_PCI=y
 # CONFIG_SND_AD1889 is not set
 # CONFIG_SND_ALS300 is not set
 CONFIG_SND_ALI5451=m
@@ -1084,37 +1101,14 @@ CONFIG_SND_ALI5451=m
 # CONFIG_SND_VIRTUOSO is not set
 # CONFIG_SND_VX222 is not set
 # CONFIG_SND_YMFPCI is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-
-#
-# USB devices
-#
+CONFIG_SND_USB=y
 # CONFIG_SND_USB_AUDIO is not set
 # CONFIG_SND_USB_CAIAQ is not set
-
-#
-# ALSA Sparc devices
-#
+CONFIG_SND_SPARC=y
 # CONFIG_SND_SUN_AMD7930 is not set
 CONFIG_SND_SUN_CS4231=m
 # CONFIG_SND_SUN_DBRI is not set
-
-#
-# System on Chip audio support
-#
 # CONFIG_SND_SOC is not set
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
 # CONFIG_SOUND_PRIME is not set
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
@@ -1167,6 +1161,7 @@ CONFIG_USB_UHCI_HCD=m
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1226,6 +1221,7 @@ CONFIG_USB_STORAGE=m
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_GADGET is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
@@ -1420,6 +1416,12 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1486,6 +1488,10 @@ CONFIG_CRYPTO_CRC32C=m
 CONFIG_CRYPTO_MD4=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1527,6 +1533,7 @@ CONFIG_BITREVERSE=y
 # CONFIG_GENERIC_FIND_FIRST_BIT is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
diff --git a/arch/sparc64/kernel/central.c b/arch/sparc64/kernel/central.c
index b61b8dfb09cf..f2e87d0d7e1d 100644
--- a/arch/sparc64/kernel/central.c
+++ b/arch/sparc64/kernel/central.c
@@ -16,8 +16,8 @@
 #include <asm/fhc.h>
 #include <asm/starfire.h>
 
-struct linux_central *central_bus = NULL;
-struct linux_fhc *fhc_list = NULL;
+static struct linux_central *central_bus = NULL;
+static struct linux_fhc *fhc_list = NULL;
 
 #define IS_CENTRAL_FHC(__fhc)	((__fhc) == central_bus->child)
 
@@ -79,9 +79,9 @@ static void adjust_regs(struct linux_prom_registers *regp, int nregs,
 }
 
 /* Apply probed fhc ranges to registers passed, if no ranges return. */
-void apply_fhc_ranges(struct linux_fhc *fhc,
-		      struct linux_prom_registers *regs,
-		      int nregs)
+static void apply_fhc_ranges(struct linux_fhc *fhc,
+			     struct linux_prom_registers *regs,
+			     int nregs)
 {
 	if (fhc->num_fhc_ranges)
 		adjust_regs(regs, nregs, fhc->fhc_ranges,
@@ -89,8 +89,8 @@ void apply_fhc_ranges(struct linux_fhc *fhc,
 }
 
 /* Apply probed central ranges to registers passed, if no ranges return. */
-void apply_central_ranges(struct linux_central *central,
-			  struct linux_prom_registers *regs, int nregs)
+static void apply_central_ranges(struct linux_central *central,
+				 struct linux_prom_registers *regs, int nregs)
 {
 	if (central->num_central_ranges)
 		adjust_regs(regs, nregs, central->central_ranges,
diff --git a/arch/sparc64/kernel/compat_audit.c b/arch/sparc64/kernel/compat_audit.c
index c1979482aa92..c831b0a4e660 100644
--- a/arch/sparc64/kernel/compat_audit.c
+++ b/arch/sparc64/kernel/compat_audit.c
@@ -1,4 +1,4 @@
-#include <asm-sparc/unistd.h>
+#include <asm/unistd_32.h>
 
 unsigned sparc32_dir_class[] = {
 #include <asm-generic/audit_dir_write.h>
diff --git a/arch/sparc64/kernel/ds.c b/arch/sparc64/kernel/ds.c
index edb74f5a1186..d0fa5aa38934 100644
--- a/arch/sparc64/kernel/ds.c
+++ b/arch/sparc64/kernel/ds.c
@@ -159,7 +159,7 @@ static void ds_var_data(struct ds_info *dp,
 			struct ds_cap_state *cp,
 			void *buf, int len);
 
-struct ds_cap_state ds_states_template[] = {
+static struct ds_cap_state ds_states_template[] = {
 	{
 		.service_id	= "md-update",
 		.data		= md_update_data,
diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c
index c49d0388b793..4d58d7ce708d 100644
--- a/arch/sparc64/kernel/ebus.c
+++ b/arch/sparc64/kernel/ebus.c
@@ -401,7 +401,7 @@ static void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_de
 	dev->ofdev.node = dp;
 	dev->ofdev.dev.parent = &dev->bus->ofdev.dev;
 	dev->ofdev.dev.bus = &ebus_bus_type;
-	sprintf(dev->ofdev.dev.bus_id, "ebus[%08x]", dp->node);
+	dev_set_name(&dev->ofdev.dev, "ebus[%08x]", dp->node);
 
 	/* Register with core */
 	if (of_device_register(&dev->ofdev) != 0)
@@ -501,7 +501,7 @@ void __init ebus_init(void)
 		ebus->ofdev.node = dp;
 		ebus->ofdev.dev.parent = &pdev->dev;
 		ebus->ofdev.dev.bus = &ebus_bus_type;
-		sprintf(ebus->ofdev.dev.bus_id, "ebus%d", num_ebus);
+		dev_set_name(&ebus->ofdev.dev, "ebus%d", num_ebus);
 
 		/* Register with core */
 		if (of_device_register(&ebus->ofdev) != 0)
diff --git a/arch/sparc64/kernel/entry.h b/arch/sparc64/kernel/entry.h
index 32fbab620852..fc294a292899 100644
--- a/arch/sparc64/kernel/entry.h
+++ b/arch/sparc64/kernel/entry.h
@@ -22,8 +22,7 @@ extern void do_notify_resume(struct pt_regs *regs,
 			     unsigned long orig_i0,
 			     unsigned long thread_info_flags);
 
-extern asmlinkage void syscall_trace(struct pt_regs *regs,
-				     int syscall_exit_p);
+extern asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p);
 
 extern void bad_trap_tl1(struct pt_regs *regs, long lvl);
 
diff --git a/arch/sparc64/kernel/hvapi.c b/arch/sparc64/kernel/hvapi.c
index f34f5d6181ef..691760b5b012 100644
--- a/arch/sparc64/kernel/hvapi.c
+++ b/arch/sparc64/kernel/hvapi.c
@@ -34,8 +34,12 @@ static struct api_info api_table[] = {
 	{ .group = HV_GRP_LDOM,					},
 	{ .group = HV_GRP_SVC_CHAN,	.flags = FLAG_PRE_API	},
 	{ .group = HV_GRP_NCS,		.flags = FLAG_PRE_API	},
+	{ .group = HV_GRP_RNG,					},
 	{ .group = HV_GRP_NIAG_PERF,	.flags = FLAG_PRE_API	},
 	{ .group = HV_GRP_FIRE_PERF,				},
+	{ .group = HV_GRP_N2_CPU,				},
+	{ .group = HV_GRP_NIU,					},
+	{ .group = HV_GRP_VF_CPU,				},
 	{ .group = HV_GRP_DIAG,		.flags = FLAG_PRE_API	},
 };
 
diff --git a/arch/sparc64/kernel/iommu_common.h b/arch/sparc64/kernel/iommu_common.h
index f3575a614fa2..53b19c8231a9 100644
--- a/arch/sparc64/kernel/iommu_common.h
+++ b/arch/sparc64/kernel/iommu_common.h
@@ -23,7 +23,7 @@
 #define IO_PAGE_SHIFT			13
 #define IO_PAGE_SIZE			(1UL << IO_PAGE_SHIFT)
 #define IO_PAGE_MASK			(~(IO_PAGE_SIZE-1))
-#define IO_PAGE_ALIGN(addr)		(((addr)+IO_PAGE_SIZE-1)&IO_PAGE_MASK)
+#define IO_PAGE_ALIGN(addr)		ALIGN(addr, IO_PAGE_SIZE)
 
 #define IO_TSB_ENTRIES			(128*1024)
 #define IO_TSB_SIZE			(IO_TSB_ENTRIES * 8)
diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c
index b441a26b73b0..ba43d85e8dde 100644
--- a/arch/sparc64/kernel/irq.c
+++ b/arch/sparc64/kernel/irq.c
@@ -621,8 +621,9 @@ unsigned int sun4v_build_irq(u32 devhandle, unsigned int devino)
 unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino)
 {
 	struct irq_handler_data *data;
-	struct ino_bucket *bucket;
 	unsigned long hv_err, cookie;
+	struct ino_bucket *bucket;
+	struct irq_desc *desc;
 	unsigned int virt_irq;
 
 	bucket = kzalloc(sizeof(struct ino_bucket), GFP_ATOMIC);
@@ -643,6 +644,13 @@ unsigned int sun4v_build_virq(u32 devhandle, unsigned int devino)
 	if (unlikely(!data))
 		return 0;
 
+	/* In order to make the LDC channel startup sequence easier,
+	 * especially wrt. locking, we do not let request_irq() enable
+	 * the interrupt.
+	 */
+	desc = irq_desc + virt_irq;
+	desc->status |= IRQ_NOAUTOEN;
+
 	set_irq_chip_data(virt_irq, data);
 
 	/* Catch accidental accesses to these things.  IMAP/ICLR handling
@@ -907,12 +915,18 @@ static void __init sun4v_init_mondo_queues(void)
 		alloc_one_mondo(&tb->nonresum_mondo_pa, tb->nonresum_qmask);
 		alloc_one_kbuf(&tb->nonresum_kernel_buf_pa,
 			       tb->nonresum_qmask);
+	}
+}
+
+static void __init init_send_mondo_info(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		struct trap_per_cpu *tb = &trap_block[cpu];
 
 		init_cpu_send_mondo_info(tb);
 	}
-
-	/* Load up the boot cpu's entries.  */
-	sun4v_register_mondo_queues(hard_smp_processor_id());
 }
 
 static struct irqaction timer_irq_action = {
@@ -941,6 +955,13 @@ void __init init_IRQ(void)
 	if (tlb_type == hypervisor)
 		sun4v_init_mondo_queues();
 
+	init_send_mondo_info();
+
+	if (tlb_type == hypervisor) {
+		/* Load up the boot cpu's entries.  */
+		sun4v_register_mondo_queues(hard_smp_processor_id());
+	}
+
 	/* We need to clear any IRQ's pending in the soft interrupt
 	 * registers, a spurious one could be left around from the
 	 * PROM timer which we just disabled.
diff --git a/arch/sparc64/kernel/kprobes.c b/arch/sparc64/kernel/kprobes.c
index f43b5d755354..201a6e547e4a 100644
--- a/arch/sparc64/kernel/kprobes.c
+++ b/arch/sparc64/kernel/kprobes.c
@@ -478,9 +478,9 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
 	return 0;
 }
 
-/* Called with kretprobe_lock held.  The value stored in the return
- * address register is actually 2 instructions before where the
- * callee will return to.  Sequences usually look something like this
+/* The value stored in the return address register is actually 2
+ * instructions before where the callee will return to.
+ * Sequences usually look something like this
  *
  *		call	some_function	<--- return register points here
  *		 nop			<--- call delay slot
@@ -512,8 +512,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 
 	/*
 	 * It is possible to have multiple instances associated with a given
@@ -553,7 +552,7 @@ int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
 	regs->tnpc = orig_ret_address + 4;
 
 	reset_current_kprobe();
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 	preempt_enable_no_resched();
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
diff --git a/arch/sparc64/kernel/ldc.c b/arch/sparc64/kernel/ldc.c
index 63969f610284..d68982330f66 100644
--- a/arch/sparc64/kernel/ldc.c
+++ b/arch/sparc64/kernel/ldc.c
@@ -1,6 +1,6 @@
 /* ldc.c: Logical Domain Channel link-layer protocol driver.
  *
- * Copyright (C) 2007 David S. Miller <davem@davemloft.net>
+ * Copyright (C) 2007, 2008 David S. Miller <davem@davemloft.net>
  */
 
 #include <linux/kernel.h>
@@ -23,8 +23,8 @@
 
 #define DRV_MODULE_NAME		"ldc"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.0"
-#define DRV_MODULE_RELDATE	"June 25, 2007"
+#define DRV_MODULE_VERSION	"1.1"
+#define DRV_MODULE_RELDATE	"July 22, 2008"
 
 static char version[] __devinitdata =
 	DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
@@ -1235,13 +1235,9 @@ int ldc_bind(struct ldc_channel *lp, const char *name)
 	unsigned long hv_err, flags;
 	int err = -EINVAL;
 
-	spin_lock_irqsave(&lp->lock, flags);
-
-	if (!name)
-		goto out_err;
-
-	if (lp->state != LDC_STATE_INIT)
-		goto out_err;
+	if (!name ||
+	    (lp->state != LDC_STATE_INIT))
+		return -EINVAL;
 
 	snprintf(lp->rx_irq_name, LDC_IRQ_NAME_MAX, "%s RX", name);
 	snprintf(lp->tx_irq_name, LDC_IRQ_NAME_MAX, "%s TX", name);
@@ -1250,25 +1246,32 @@ int ldc_bind(struct ldc_channel *lp, const char *name)
 			  IRQF_SAMPLE_RANDOM | IRQF_SHARED,
 			  lp->rx_irq_name, lp);
 	if (err)
-		goto out_err;
+		return err;
 
 	err = request_irq(lp->cfg.tx_irq, ldc_tx,
 			  IRQF_SAMPLE_RANDOM | IRQF_SHARED,
 			  lp->tx_irq_name, lp);
-	if (err)
-		goto out_free_rx_irq;
+	if (err) {
+		free_irq(lp->cfg.rx_irq, lp);
+		return err;
+	}
+
 
+	spin_lock_irqsave(&lp->lock, flags);
+
+	enable_irq(lp->cfg.rx_irq);
+	enable_irq(lp->cfg.tx_irq);
 
 	lp->flags |= LDC_FLAG_REGISTERED_IRQS;
 
 	err = -ENODEV;
 	hv_err = sun4v_ldc_tx_qconf(lp->id, 0, 0);
 	if (hv_err)
-		goto out_free_tx_irq;
+		goto out_free_irqs;
 
 	hv_err = sun4v_ldc_tx_qconf(lp->id, lp->tx_ra, lp->tx_num_entries);
 	if (hv_err)
-		goto out_free_tx_irq;
+		goto out_free_irqs;
 
 	hv_err = sun4v_ldc_rx_qconf(lp->id, 0, 0);
 	if (hv_err)
@@ -1304,14 +1307,11 @@ out_unmap_rx:
 out_unmap_tx:
 	sun4v_ldc_tx_qconf(lp->id, 0, 0);
 
-out_free_tx_irq:
+out_free_irqs:
 	lp->flags &= ~LDC_FLAG_REGISTERED_IRQS;
 	free_irq(lp->cfg.tx_irq, lp);
-
-out_free_rx_irq:
 	free_irq(lp->cfg.rx_irq, lp);
 
-out_err:
 	spin_unlock_irqrestore(&lp->lock, flags);
 
 	return err;
diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c
index d569f60c24b8..f8b50cbf4bf7 100644
--- a/arch/sparc64/kernel/of_device.c
+++ b/arch/sparc64/kernel/of_device.c
@@ -56,9 +56,6 @@ struct of_device *of_find_device_by_node(struct device_node *dp)
 EXPORT_SYMBOL(of_find_device_by_node);
 
 #ifdef CONFIG_PCI
-struct bus_type isa_bus_type;
-EXPORT_SYMBOL(isa_bus_type);
-
 struct bus_type ebus_bus_type;
 EXPORT_SYMBOL(ebus_bus_type);
 #endif
@@ -797,9 +794,9 @@ static struct of_device * __init scan_one_device(struct device_node *dp,
 	op->dev.parent = parent;
 	op->dev.bus = &of_platform_bus_type;
 	if (!parent)
-		strcpy(op->dev.bus_id, "root");
+		dev_set_name(&op->dev, "root");
 	else
-		sprintf(op->dev.bus_id, "%08x", dp->node);
+		dev_set_name(&op->dev, "%08x", dp->node);
 
 	if (of_device_register(op)) {
 		printk("%s: Could not register of device.\n",
@@ -842,8 +839,6 @@ static int __init of_bus_driver_init(void)
 	err = of_bus_type_init(&of_platform_bus_type, "of");
 #ifdef CONFIG_PCI
 	if (!err)
-		err = of_bus_type_init(&isa_bus_type, "isa");
-	if (!err)
 		err = of_bus_type_init(&ebus_bus_type, "ebus");
 #endif
 #ifdef CONFIG_SBUS
diff --git a/arch/sparc64/kernel/pci.c b/arch/sparc64/kernel/pci.c
index 112b09f16f36..55096195458f 100644
--- a/arch/sparc64/kernel/pci.c
+++ b/arch/sparc64/kernel/pci.c
@@ -408,7 +408,7 @@ struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
 	dev->class = class >> 8;
 	dev->revision = class & 0xff;
 
-	sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+	dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
 		dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
 
 	if (ofpci_verbose)
diff --git a/arch/sparc64/kernel/pci_msi.c b/arch/sparc64/kernel/pci_msi.c
index db5e8fd8f674..60c71e350212 100644
--- a/arch/sparc64/kernel/pci_msi.c
+++ b/arch/sparc64/kernel/pci_msi.c
@@ -120,9 +120,9 @@ static struct irq_chip msi_irq = {
 	/* XXX affinity XXX */
 };
 
-int sparc64_setup_msi_irq(unsigned int *virt_irq_p,
-			  struct pci_dev *pdev,
-			  struct msi_desc *entry)
+static int sparc64_setup_msi_irq(unsigned int *virt_irq_p,
+				 struct pci_dev *pdev,
+				 struct msi_desc *entry)
 {
 	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	const struct sparc64_msiq_ops *ops = pbm->msi_ops;
@@ -179,8 +179,8 @@ out_err:
 	return err;
 }
 
-void sparc64_teardown_msi_irq(unsigned int virt_irq,
-			      struct pci_dev *pdev)
+static void sparc64_teardown_msi_irq(unsigned int virt_irq,
+				     struct pci_dev *pdev)
 {
 	struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
 	const struct sparc64_msiq_ops *ops = pbm->msi_ops;
diff --git a/arch/sparc64/kernel/pci_sun4v.c b/arch/sparc64/kernel/pci_sun4v.c
index e2bb9790039c..a104c80d319d 100644
--- a/arch/sparc64/kernel/pci_sun4v.c
+++ b/arch/sparc64/kernel/pci_sun4v.c
@@ -531,7 +531,7 @@ static void dma_4v_sync_sg_for_cpu(struct device *dev,
 	/* Nothing to do... */
 }
 
-const struct dma_ops sun4v_dma_ops = {
+static const struct dma_ops sun4v_dma_ops = {
 	.alloc_coherent			= dma_4v_alloc_coherent,
 	.free_coherent			= dma_4v_free_coherent,
 	.map_single			= dma_4v_map_single,
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 2084f81a76e1..7f5debdc5fed 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -15,7 +15,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/kallsyms.h>
 #include <linux/mm.h>
 #include <linux/fs.h>
 #include <linux/smp.h>
@@ -53,8 +52,6 @@
 #include <asm/irq_regs.h>
 #include <asm/smp.h>
 
-/* #define VERBOSE_SHOWREGS */
-
 static void sparc64_yield(int cpu)
 {
 	if (tlb_type != hypervisor)
@@ -97,7 +94,7 @@ void cpu_idle(void)
 	set_thread_flag(TIF_POLLING_NRFLAG);
 
 	while(1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 
 		while (!need_resched() && !cpu_is_offline(cpu))
 			sparc64_yield(cpu);
@@ -211,28 +208,14 @@ static void show_regwindow(struct pt_regs *regs)
 	printk("i4: %016lx i5: %016lx i6: %016lx i7: %016lx\n",
 	       rwk->ins[4], rwk->ins[5], rwk->ins[6], rwk->ins[7]);
 	if (regs->tstate & TSTATE_PRIV)
-		print_symbol("I7: <%s>\n", rwk->ins[7]);
+		printk("I7: <%pS>\n", (void *) rwk->ins[7]);
 }
 
-#ifdef CONFIG_SMP
-static DEFINE_SPINLOCK(regdump_lock);
-#endif
-
-void __show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
 {
-#ifdef CONFIG_SMP
-	unsigned long flags;
-
-	/* Protect against xcall ipis which might lead to livelock on the lock */
-	__asm__ __volatile__("rdpr      %%pstate, %0\n\t"
-			     "wrpr      %0, %1, %%pstate"
-			     : "=r" (flags)
-			     : "i" (PSTATE_IE));
-	spin_lock(&regdump_lock);
-#endif
 	printk("TSTATE: %016lx TPC: %016lx TNPC: %016lx Y: %08x    %s\n", regs->tstate,
 	       regs->tpc, regs->tnpc, regs->y, print_tainted());
-	print_symbol("TPC: <%s>\n", regs->tpc);
+	printk("TPC: <%pS>\n", (void *) regs->tpc);
 	printk("g0: %016lx g1: %016lx g2: %016lx g3: %016lx\n",
 	       regs->u_regs[0], regs->u_regs[1], regs->u_regs[2],
 	       regs->u_regs[3]);
@@ -245,66 +228,26 @@ void __show_regs(struct pt_regs * regs)
 	printk("o4: %016lx o5: %016lx sp: %016lx ret_pc: %016lx\n",
 	       regs->u_regs[12], regs->u_regs[13], regs->u_regs[14],
 	       regs->u_regs[15]);
-	print_symbol("RPC: <%s>\n", regs->u_regs[15]);
+	printk("RPC: <%pS>\n", (void *) regs->u_regs[15]);
 	show_regwindow(regs);
-#ifdef CONFIG_SMP
-	spin_unlock(&regdump_lock);
-	__asm__ __volatile__("wrpr	%0, 0, %%pstate"
-			     : : "r" (flags));
-#endif
 }
 
-#ifdef VERBOSE_SHOWREGS
-static void idump_from_user (unsigned int *pc)
-{
-	int i;
-	int code;
-	
-	if((((unsigned long) pc) & 3))
-		return;
-	
-	pc -= 3;
-	for(i = -3; i < 6; i++) {
-		get_user(code, pc);
-		printk("%c%08x%c",i?' ':'<',code,i?' ':'>');
-		pc++;
-	}
-	printk("\n");
-}
-#endif
+struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
+static DEFINE_SPINLOCK(global_reg_snapshot_lock);
 
-void show_regs(struct pt_regs *regs)
+static bool kstack_valid(struct thread_info *tp, struct reg_window *rw)
 {
-#ifdef VERBOSE_SHOWREGS
-	extern long etrap, etraptl1;
-#endif
-	__show_regs(regs);
-#if 0
-#ifdef CONFIG_SMP
-	{
-		extern void smp_report_regs(void);
+	unsigned long thread_base, fp;
 
-		smp_report_regs();
-	}
-#endif
-#endif
+	thread_base = (unsigned long) tp;
+	fp = (unsigned long) rw;
 
-#ifdef VERBOSE_SHOWREGS	
-	if (regs->tpc >= &etrap && regs->tpc < &etraptl1 &&
-	    regs->u_regs[14] >= (long)current - PAGE_SIZE &&
-	    regs->u_regs[14] < (long)current + 6 * PAGE_SIZE) {
-		printk ("*********parent**********\n");
-		__show_regs((struct pt_regs *)(regs->u_regs[14] + PTREGS_OFF));
-		idump_from_user(((struct pt_regs *)(regs->u_regs[14] + PTREGS_OFF))->tpc);
-		printk ("*********endpar**********\n");
-	}
-#endif
+	if (fp < (thread_base + sizeof(struct thread_info)) ||
+	    fp >= (thread_base + THREAD_SIZE))
+		return false;
+	return true;
 }
 
-#ifdef CONFIG_MAGIC_SYSRQ
-struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
-static DEFINE_SPINLOCK(global_reg_snapshot_lock);
-
 static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs,
 			      int this_cpu)
 {
@@ -316,14 +259,22 @@ static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs,
 	global_reg_snapshot[this_cpu].o7 = regs->u_regs[UREG_I7];
 
 	if (regs->tstate & TSTATE_PRIV) {
+		struct thread_info *tp = current_thread_info();
 		struct reg_window *rw;
 
 		rw = (struct reg_window *)
 			(regs->u_regs[UREG_FP] + STACK_BIAS);
-		global_reg_snapshot[this_cpu].i7 = rw->ins[6];
-	} else
+		if (kstack_valid(tp, rw)) {
+			global_reg_snapshot[this_cpu].i7 = rw->ins[7];
+			rw = (struct reg_window *)
+				(rw->ins[6] + STACK_BIAS);
+			if (kstack_valid(tp, rw))
+				global_reg_snapshot[this_cpu].rpc = rw->ins[7];
+		}
+	} else {
 		global_reg_snapshot[this_cpu].i7 = 0;
-
+		global_reg_snapshot[this_cpu].rpc = 0;
+	}
 	global_reg_snapshot[this_cpu].thread = tp;
 }
 
@@ -342,13 +293,10 @@ static void __global_reg_poll(struct global_reg_snapshot *gp)
 	}
 }
 
-static void sysrq_handle_globreg(int key, struct tty_struct *tty)
+void __trigger_all_cpu_backtrace(void)
 {
 	struct thread_info *tp = current_thread_info();
 	struct pt_regs *regs = get_irq_regs();
-#ifdef CONFIG_KALLSYMS
-	char buffer[KSYM_SYMBOL_LEN];
-#endif
 	unsigned long flags;
 	int this_cpu, cpu;
 
@@ -377,19 +325,16 @@ static void sysrq_handle_globreg(int key, struct tty_struct *tty)
 		       gp->tstate, gp->tpc, gp->tnpc,
 		       ((tp && tp->task) ? tp->task->comm : "NULL"),
 		       ((tp && tp->task) ? tp->task->pid : -1));
-#ifdef CONFIG_KALLSYMS
+
 		if (gp->tstate & TSTATE_PRIV) {
-			sprint_symbol(buffer, gp->tpc);
-			printk("             TPC[%s] ", buffer);
-			sprint_symbol(buffer, gp->o7);
-			printk("O7[%s] ", buffer);
-			sprint_symbol(buffer, gp->i7);
-			printk("I7[%s]\n", buffer);
-		} else
-#endif
-		{
-			printk("             TPC[%lx] O7[%lx] I7[%lx]\n",
-			       gp->tpc, gp->o7, gp->i7);
+			printk("             TPC[%pS] O7[%pS] I7[%pS] RPC[%pS]\n",
+			       (void *) gp->tpc,
+			       (void *) gp->o7,
+			       (void *) gp->i7,
+			       (void *) gp->rpc);
+		} else {
+			printk("             TPC[%lx] O7[%lx] I7[%lx] RPC[%lx]\n",
+			       gp->tpc, gp->o7, gp->i7, gp->rpc);
 		}
 	}
 
@@ -398,6 +343,13 @@ static void sysrq_handle_globreg(int key, struct tty_struct *tty)
 	spin_unlock_irqrestore(&global_reg_snapshot_lock, flags);
 }
 
+#ifdef CONFIG_MAGIC_SYSRQ
+
+static void sysrq_handle_globreg(int key, struct tty_struct *tty)
+{
+	__trigger_all_cpu_backtrace();
+}
+
 static struct sysrq_key_op sparc_globalreg_op = {
 	.handler	= sysrq_handle_globreg,
 	.help_msg	= "Globalregs",
@@ -691,9 +643,9 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long sp,
 		  ((unsigned long) child_sf) - STACK_BIAS;
 
 		/* Special case, if we are spawning a kernel thread from
-		 * a userspace task (via KMOD, NFS, or similar) we must
-		 * disable performance counters in the child because the
-		 * address space and protection realm are changing.
+		 * a userspace task (usermode helper, NFS or similar), we
+		 * must disable performance counters in the child because
+		 * the address space and protection realm are changing.
 		 */
 		if (t->flags & _TIF_PERFCTR) {
 			t->user_cntd0 = t->user_cntd1 = NULL;
diff --git a/arch/sparc64/kernel/ptrace.c b/arch/sparc64/kernel/ptrace.c
index f6c9fc92921d..bd578cc4856d 100644
--- a/arch/sparc64/kernel/ptrace.c
+++ b/arch/sparc64/kernel/ptrace.c
@@ -23,6 +23,7 @@
 #include <linux/audit.h>
 #include <linux/signal.h>
 #include <linux/regset.h>
+#include <linux/tracehook.h>
 #include <linux/compat.h>
 #include <linux/elf.h>
 
@@ -1049,8 +1050,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p)
+asmlinkage int syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 {
+	int ret = 0;
+
 	/* do the secure computing check first */
 	secure_computing(regs->u_regs[UREG_G1]);
 
@@ -1064,27 +1067,14 @@ asmlinkage void syscall_trace(struct pt_regs *regs, int syscall_exit_p)
 		audit_syscall_exit(result, regs->u_regs[UREG_I0]);
 	}
 
-	if (!(current->ptrace & PT_PTRACED))
-		goto out;
-
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		goto out;
-
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
+	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
+		if (syscall_exit_p)
+			tracehook_report_syscall_exit(regs, 0);
+		else
+			ret = tracehook_report_syscall_entry(regs);
 	}
 
-out:
-	if (unlikely(current->audit_context) && !syscall_exit_p)
+	if (unlikely(current->audit_context) && !syscall_exit_p && !ret)
 		audit_syscall_entry((test_thread_flag(TIF_32BIT) ?
 				     AUDIT_ARCH_SPARC :
 				     AUDIT_ARCH_SPARC64),
@@ -1093,4 +1083,6 @@ out:
 				    regs->u_regs[UREG_I1],
 				    regs->u_regs[UREG_I2],
 				    regs->u_regs[UREG_I3]);
+
+	return ret;
 }
diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S
index c6fc695fe1fe..97a993c1f7f3 100644
--- a/arch/sparc64/kernel/rtrap.S
+++ b/arch/sparc64/kernel/rtrap.S
@@ -46,7 +46,7 @@ __handle_user_windows:
 		wrpr			%g0, RTRAP_PSTATE_IRQOFF, %pstate
 		ldx			[%g6 + TI_FLAGS], %l0
 
-1:		andcc			%l0, _TIF_SIGPENDING, %g0
+1:		andcc			%l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 		be,pt			%xcc, __handle_user_windows_continue
 		 nop
 		mov			%l5, %o1
@@ -86,7 +86,7 @@ __handle_perfctrs:
 		 wrpr			%g0, RTRAP_PSTATE, %pstate
 		wrpr			%g0, RTRAP_PSTATE_IRQOFF, %pstate
 		ldx			[%g6 + TI_FLAGS], %l0
-1:		andcc			%l0, _TIF_SIGPENDING, %g0
+1:		andcc			%l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 
 		be,pt			%xcc, __handle_perfctrs_continue
 		 sethi			%hi(TSTATE_PEF), %o0
@@ -195,7 +195,7 @@ __handle_preemption_continue:
 		 andcc			%l1, %o0, %g0
 		andcc			%l0, _TIF_NEED_RESCHED, %g0
 		bne,pn			%xcc, __handle_preemption
-		 andcc			%l0, _TIF_SIGPENDING, %g0
+		 andcc			%l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
 		bne,pn			%xcc, __handle_signal
 __handle_signal_continue:
 		 ldub			[%g6 + TI_WSAVED], %o2
diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c
index 9667e96fd513..ec82d76dc6f2 100644
--- a/arch/sparc64/kernel/signal.c
+++ b/arch/sparc64/kernel/signal.c
@@ -2,7 +2,7 @@
  *  arch/sparc64/kernel/signal.c
  *
  *  Copyright (C) 1991, 1992  Linus Torvalds
- *  Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *  Copyright (C) 1995, 2008 David S. Miller (davem@davemloft.net)
  *  Copyright (C) 1996 Miguel de Icaza (miguel@nuclecu.unam.mx)
  *  Copyright (C) 1997 Eddie C. Dost   (ecd@skynet.be)
  *  Copyright (C) 1997,1998 Jakub Jelinek   (jj@sunsite.mff.cuni.cz)
@@ -17,6 +17,7 @@
 #include <linux/errno.h>
 #include <linux/wait.h>
 #include <linux/ptrace.h>
+#include <linux/tracehook.h>
 #include <linux/unistd.h>
 #include <linux/mm.h>
 #include <linux/tty.h>
@@ -89,7 +90,9 @@ asmlinkage void sparc64_set_context(struct pt_regs *regs)
 	err |= __get_user(regs->u_regs[UREG_G4], (&(*grp)[MC_G4]));
 	err |= __get_user(regs->u_regs[UREG_G5], (&(*grp)[MC_G5]));
 	err |= __get_user(regs->u_regs[UREG_G6], (&(*grp)[MC_G6]));
-	err |= __get_user(regs->u_regs[UREG_G7], (&(*grp)[MC_G7]));
+
+	/* Skip %g7 as that's the thread register in userspace.  */
+
 	err |= __get_user(regs->u_regs[UREG_I0], (&(*grp)[MC_O0]));
 	err |= __get_user(regs->u_regs[UREG_I1], (&(*grp)[MC_O1]));
 	err |= __get_user(regs->u_regs[UREG_I2], (&(*grp)[MC_O2]));
@@ -574,6 +577,8 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 		 * clear the TS_RESTORE_SIGMASK flag.
 		 */
 		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+
+		tracehook_signal_handler(signr, &info, &ka, regs, 0);
 		return;
 	}
 	if (restart_syscall &&
@@ -605,4 +610,8 @@ void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, unsigned long
 {
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs, orig_i0);
+	if (thread_info_flags & _TIF_NOTIFY_RESUME) {
+		clear_thread_flag(TIF_NOTIFY_RESUME);
+		tracehook_notify_resume(regs);
+	}
 }
diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c
index 97cdd1bf4a10..ba5b09ad6666 100644
--- a/arch/sparc64/kernel/signal32.c
+++ b/arch/sparc64/kernel/signal32.c
@@ -19,6 +19,7 @@
 #include <linux/binfmts.h>
 #include <linux/compat.h>
 #include <linux/bitops.h>
+#include <linux/tracehook.h>
 
 #include <asm/uaccess.h>
 #include <asm/ptrace.h>
@@ -794,6 +795,8 @@ void do_signal32(sigset_t *oldset, struct pt_regs * regs,
 		 * clear the TS_RESTORE_SIGMASK flag.
 		 */
 		current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
+
+		tracehook_signal_handler(signr, &info, &ka, regs, 0);
 		return;
 	}
 	if (restart_syscall &&
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index fa63c68a1819..27b81775a4de 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -459,27 +459,35 @@ again:
 	}
 }
 
-static inline void spitfire_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
+static void spitfire_xcall_deliver(struct trap_per_cpu *tb, int cnt)
 {
+	u64 *mondo, data0, data1, data2;
+	u16 *cpu_list;
 	u64 pstate;
 	int i;
 
 	__asm__ __volatile__("rdpr %%pstate, %0" : "=r" (pstate));
-	for_each_cpu_mask(i, mask)
-		spitfire_xcall_helper(data0, data1, data2, pstate, i);
+	cpu_list = __va(tb->cpu_list_pa);
+	mondo = __va(tb->cpu_mondo_block_pa);
+	data0 = mondo[0];
+	data1 = mondo[1];
+	data2 = mondo[2];
+	for (i = 0; i < cnt; i++)
+		spitfire_xcall_helper(data0, data1, data2, pstate, cpu_list[i]);
 }
 
 /* Cheetah now allows to send the whole 64-bytes of data in the interrupt
  * packet, but we have no use for that.  However we do take advantage of
  * the new pipelining feature (ie. dispatch to multiple cpus simultaneously).
  */
-static void cheetah_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
+static void cheetah_xcall_deliver(struct trap_per_cpu *tb, int cnt)
 {
-	u64 pstate, ver, busy_mask;
 	int nack_busy_id, is_jbus, need_more;
+	u64 *mondo, pstate, ver, busy_mask;
+	u16 *cpu_list;
 
-	if (cpus_empty(mask))
-		return;
+	cpu_list = __va(tb->cpu_list_pa);
+	mondo = __va(tb->cpu_mondo_block_pa);
 
 	/* Unfortunately, someone at Sun had the brilliant idea to make the
 	 * busy/nack fields hard-coded by ITID number for this Ultra-III
@@ -502,7 +510,7 @@ retry:
 			     "stxa	%2, [%5] %6\n\t"
 			     "membar	#Sync\n\t"
 			     : /* no outputs */
-			     : "r" (data0), "r" (data1), "r" (data2),
+			     : "r" (mondo[0]), "r" (mondo[1]), "r" (mondo[2]),
 			       "r" (0x40), "r" (0x50), "r" (0x60),
 			       "i" (ASI_INTR_W));
 
@@ -511,11 +519,16 @@ retry:
 	{
 		int i;
 
-		for_each_cpu_mask(i, mask) {
-			u64 target = (i << 14) | 0x70;
+		for (i = 0; i < cnt; i++) {
+			u64 target, nr;
+
+			nr = cpu_list[i];
+			if (nr == 0xffff)
+				continue;
 
+			target = (nr << 14) | 0x70;
 			if (is_jbus) {
-				busy_mask |= (0x1UL << (i * 2));
+				busy_mask |= (0x1UL << (nr * 2));
 			} else {
 				target |= (nack_busy_id << 24);
 				busy_mask |= (0x1UL <<
@@ -549,11 +562,13 @@ retry:
 				__asm__ __volatile__("wrpr %0, 0x0, %%pstate"
 						     : : "r" (pstate));
 				if (unlikely(need_more)) {
-					int i, cnt = 0;
-					for_each_cpu_mask(i, mask) {
-						cpu_clear(i, mask);
-						cnt++;
-						if (cnt == 32)
+					int i, this_cnt = 0;
+					for (i = 0; i < cnt; i++) {
+						if (cpu_list[i] == 0xffff)
+							continue;
+						cpu_list[i] = 0xffff;
+						this_cnt++;
+						if (this_cnt == 32)
 							break;
 					}
 					goto retry;
@@ -584,16 +599,20 @@ retry:
 			/* Clear out the mask bits for cpus which did not
 			 * NACK us.
 			 */
-			for_each_cpu_mask(i, mask) {
-				u64 check_mask;
+			for (i = 0; i < cnt; i++) {
+				u64 check_mask, nr;
+
+				nr = cpu_list[i];
+				if (nr == 0xffff)
+					continue;
 
 				if (is_jbus)
-					check_mask = (0x2UL << (2*i));
+					check_mask = (0x2UL << (2*nr));
 				else
 					check_mask = (0x2UL <<
 						      this_busy_nack);
 				if ((dispatch_stat & check_mask) == 0)
-					cpu_clear(i, mask);
+					cpu_list[i] = 0xffff;
 				this_busy_nack += 2;
 				if (this_busy_nack == 64)
 					break;
@@ -605,47 +624,17 @@ retry:
 }
 
 /* Multi-cpu list version.  */
-static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t mask)
+static void hypervisor_xcall_deliver(struct trap_per_cpu *tb, int cnt)
 {
-	struct trap_per_cpu *tb;
+	int retries, this_cpu, prev_sent, i, saw_cpu_error;
+	unsigned long status;
 	u16 *cpu_list;
-	u64 *mondo;
-	cpumask_t error_mask;
-	unsigned long flags, status;
-	int cnt, retries, this_cpu, prev_sent, i;
-
-	if (cpus_empty(mask))
-		return;
-
-	/* We have to do this whole thing with interrupts fully disabled.
-	 * Otherwise if we send an xcall from interrupt context it will
-	 * corrupt both our mondo block and cpu list state.
-	 *
-	 * One consequence of this is that we cannot use timeout mechanisms
-	 * that depend upon interrupts being delivered locally.  So, for
-	 * example, we cannot sample jiffies and expect it to advance.
-	 *
-	 * Fortunately, udelay() uses %stick/%tick so we can use that.
-	 */
-	local_irq_save(flags);
 
 	this_cpu = smp_processor_id();
-	tb = &trap_block[this_cpu];
-
-	mondo = __va(tb->cpu_mondo_block_pa);
-	mondo[0] = data0;
-	mondo[1] = data1;
-	mondo[2] = data2;
-	wmb();
 
 	cpu_list = __va(tb->cpu_list_pa);
 
-	/* Setup the initial cpu list.  */
-	cnt = 0;
-	for_each_cpu_mask(i, mask)
-		cpu_list[cnt++] = i;
-
-	cpus_clear(error_mask);
+	saw_cpu_error = 0;
 	retries = 0;
 	prev_sent = 0;
 	do {
@@ -690,10 +679,9 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t
 					continue;
 
 				err = sun4v_cpu_state(cpu);
-				if (err >= 0 &&
-				    err == HV_CPU_STATE_ERROR) {
+				if (err == HV_CPU_STATE_ERROR) {
+					saw_cpu_error = (cpu + 1);
 					cpu_list[i] = 0xffff;
-					cpu_set(cpu, error_mask);
 				}
 			}
 		} else if (unlikely(status != HV_EWOULDBLOCK))
@@ -717,32 +705,24 @@ static void hypervisor_xcall_deliver(u64 data0, u64 data1, u64 data2, cpumask_t
 		}
 	} while (1);
 
-	local_irq_restore(flags);
-
-	if (unlikely(!cpus_empty(error_mask)))
+	if (unlikely(saw_cpu_error))
 		goto fatal_mondo_cpu_error;
 
 	return;
 
 fatal_mondo_cpu_error:
 	printk(KERN_CRIT "CPU[%d]: SUN4V mondo cpu error, some target cpus "
-	       "were in error state\n",
-	       this_cpu);
-	printk(KERN_CRIT "CPU[%d]: Error mask [ ", this_cpu);
-	for_each_cpu_mask(i, error_mask)
-		printk("%d ", i);
-	printk("]\n");
+	       "(including %d) were in error state\n",
+	       this_cpu, saw_cpu_error - 1);
 	return;
 
 fatal_mondo_timeout:
-	local_irq_restore(flags);
 	printk(KERN_CRIT "CPU[%d]: SUN4V mondo timeout, no forward "
 	       " progress after %d retries.\n",
 	       this_cpu, retries);
 	goto dump_cpu_list_and_out;
 
 fatal_mondo_error:
-	local_irq_restore(flags);
 	printk(KERN_CRIT "CPU[%d]: Unexpected SUN4V mondo error %lu\n",
 	       this_cpu, status);
 	printk(KERN_CRIT "CPU[%d]: Args were cnt(%d) cpulist_pa(%lx) "
@@ -756,124 +736,103 @@ dump_cpu_list_and_out:
 	printk("]\n");
 }
 
-/* Send cross call to all processors mentioned in MASK
- * except self.
- */
-static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 data2, cpumask_t mask)
-{
-	u64 data0 = (((u64)ctx)<<32 | (((u64)func) & 0xffffffff));
-	int this_cpu = get_cpu();
-
-	cpus_and(mask, mask, cpu_online_map);
-	cpu_clear(this_cpu, mask);
+static void (*xcall_deliver_impl)(struct trap_per_cpu *, int);
 
-	if (tlb_type == spitfire)
-		spitfire_xcall_deliver(data0, data1, data2, mask);
-	else if (tlb_type == cheetah || tlb_type == cheetah_plus)
-		cheetah_xcall_deliver(data0, data1, data2, mask);
-	else
-		hypervisor_xcall_deliver(data0, data1, data2, mask);
-	/* NOTE: Caller runs local copy on master. */
-
-	put_cpu();
-}
+static void xcall_deliver(u64 data0, u64 data1, u64 data2, const cpumask_t *mask)
+{
+	struct trap_per_cpu *tb;
+	int this_cpu, i, cnt;
+	unsigned long flags;
+	u16 *cpu_list;
+	u64 *mondo;
 
-extern unsigned long xcall_sync_tick;
+	/* We have to do this whole thing with interrupts fully disabled.
+	 * Otherwise if we send an xcall from interrupt context it will
+	 * corrupt both our mondo block and cpu list state.
+	 *
+	 * One consequence of this is that we cannot use timeout mechanisms
+	 * that depend upon interrupts being delivered locally.  So, for
+	 * example, we cannot sample jiffies and expect it to advance.
+	 *
+	 * Fortunately, udelay() uses %stick/%tick so we can use that.
+	 */
+	local_irq_save(flags);
 
-static void smp_start_sync_tick_client(int cpu)
-{
-	cpumask_t mask = cpumask_of_cpu(cpu);
+	this_cpu = smp_processor_id();
+	tb = &trap_block[this_cpu];
 
-	smp_cross_call_masked(&xcall_sync_tick,
-			      0, 0, 0, mask);
-}
+	mondo = __va(tb->cpu_mondo_block_pa);
+	mondo[0] = data0;
+	mondo[1] = data1;
+	mondo[2] = data2;
+	wmb();
 
-/* Send cross call to all processors except self. */
-#define smp_cross_call(func, ctx, data1, data2) \
-	smp_cross_call_masked(func, ctx, data1, data2, cpu_online_map)
+	cpu_list = __va(tb->cpu_list_pa);
 
-struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	atomic_t finished;
-	int wait;
-};
+	/* Setup the initial cpu list.  */
+	cnt = 0;
+	for_each_cpu_mask_nr(i, *mask) {
+		if (i == this_cpu || !cpu_online(i))
+			continue;
+		cpu_list[cnt++] = i;
+	}
 
-static struct call_data_struct *call_data;
+	if (cnt)
+		xcall_deliver_impl(tb, cnt);
 
-extern unsigned long xcall_call_function;
+	local_irq_restore(flags);
+}
 
-/**
- * smp_call_function(): Run a function on all other CPUs.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: currently unused.
- * @wait: If true, wait (atomically) until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code. Does not return until
- * remote CPUs are nearly ready to execute <<func>> or are or have executed.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
+/* Send cross call to all processors mentioned in MASK_P
+ * except self.  Really, there are only two cases currently,
+ * "&cpu_online_map" and "&mm->cpu_vm_mask".
  */
-static int smp_call_function_mask(void (*func)(void *info), void *info,
-				  int nonatomic, int wait, cpumask_t mask)
+static void smp_cross_call_masked(unsigned long *func, u32 ctx, u64 data1, u64 data2, const cpumask_t *mask)
 {
-	struct call_data_struct data;
-	int cpus;
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.finished, 0);
-	data.wait = wait;
-
-	spin_lock(&call_lock);
+	u64 data0 = (((u64)ctx)<<32 | (((u64)func) & 0xffffffff));
 
-	cpu_clear(smp_processor_id(), mask);
-	cpus = cpus_weight(mask);
-	if (!cpus)
-		goto out_unlock;
+	xcall_deliver(data0, data1, data2, mask);
+}
 
-	call_data = &data;
-	mb();
+/* Send cross call to all processors except self. */
+static void smp_cross_call(unsigned long *func, u32 ctx, u64 data1, u64 data2)
+{
+	smp_cross_call_masked(func, ctx, data1, data2, &cpu_online_map);
+}
 
-	smp_cross_call_masked(&xcall_call_function, 0, 0, 0, mask);
+extern unsigned long xcall_sync_tick;
 
-	/* Wait for response */
-	while (atomic_read(&data.finished) != cpus)
-		cpu_relax();
+static void smp_start_sync_tick_client(int cpu)
+{
+	xcall_deliver((u64) &xcall_sync_tick, 0, 0,
+		      &cpumask_of_cpu(cpu));
+}
 
-out_unlock:
-	spin_unlock(&call_lock);
+extern unsigned long xcall_call_function;
 
-	return 0;
+void arch_send_call_function_ipi(cpumask_t mask)
+{
+	xcall_deliver((u64) &xcall_call_function, 0, 0, &mask);
 }
 
-int smp_call_function(void (*func)(void *info), void *info,
-		      int nonatomic, int wait)
+extern unsigned long xcall_call_function_single;
+
+void arch_send_call_function_single_ipi(int cpu)
 {
-	return smp_call_function_mask(func, info, nonatomic, wait,
-				      cpu_online_map);
+	xcall_deliver((u64) &xcall_call_function_single, 0, 0,
+		      &cpumask_of_cpu(cpu));
 }
 
 void smp_call_function_client(int irq, struct pt_regs *regs)
 {
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
+	clear_softint(1 << irq);
+	generic_smp_call_function_interrupt();
+}
 
+void smp_call_function_single_client(int irq, struct pt_regs *regs)
+{
 	clear_softint(1 << irq);
-	if (call_data->wait) {
-		/* let initiator proceed only after completion */
-		func(info);
-		atomic_inc(&call_data->finished);
-	} else {
-		/* let initiator proceed after getting data */
-		atomic_inc(&call_data->finished);
-		func(info);
-	}
+	generic_smp_call_function_single_interrupt();
 }
 
 static void tsb_sync(void *info)
@@ -893,13 +852,12 @@ static void tsb_sync(void *info)
 
 void smp_tsb_sync(struct mm_struct *mm)
 {
-	smp_call_function_mask(tsb_sync, mm, 0, 1, mm->cpu_vm_mask);
+	smp_call_function_mask(mm->cpu_vm_mask, tsb_sync, mm, 1);
 }
 
 extern unsigned long xcall_flush_tlb_mm;
 extern unsigned long xcall_flush_tlb_pending;
 extern unsigned long xcall_flush_tlb_kernel_range;
-extern unsigned long xcall_report_regs;
 #ifdef CONFIG_MAGIC_SYSRQ
 extern unsigned long xcall_fetch_glob_regs;
 #endif
@@ -934,7 +892,6 @@ static inline void __local_flush_dcache_page(struct page *page)
 
 void smp_flush_dcache_page_impl(struct page *page, int cpu)
 {
-	cpumask_t mask = cpumask_of_cpu(cpu);
 	int this_cpu;
 
 	if (tlb_type == hypervisor)
@@ -950,29 +907,24 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu)
 		__local_flush_dcache_page(page);
 	} else if (cpu_online(cpu)) {
 		void *pg_addr = page_address(page);
-		u64 data0;
+		u64 data0 = 0;
 
 		if (tlb_type == spitfire) {
-			data0 =
-				((u64)&xcall_flush_dcache_page_spitfire);
+			data0 = ((u64)&xcall_flush_dcache_page_spitfire);
 			if (page_mapping(page) != NULL)
 				data0 |= ((u64)1 << 32);
-			spitfire_xcall_deliver(data0,
-					       __pa(pg_addr),
-					       (u64) pg_addr,
-					       mask);
 		} else if (tlb_type == cheetah || tlb_type == cheetah_plus) {
 #ifdef DCACHE_ALIASING_POSSIBLE
-			data0 =
-				((u64)&xcall_flush_dcache_page_cheetah);
-			cheetah_xcall_deliver(data0,
-					      __pa(pg_addr),
-					      0, mask);
+			data0 =	((u64)&xcall_flush_dcache_page_cheetah);
 #endif
 		}
+		if (data0) {
+			xcall_deliver(data0, __pa(pg_addr),
+				      (u64) pg_addr, &cpumask_of_cpu(cpu));
 #ifdef CONFIG_DEBUG_DCFLUSH
-		atomic_inc(&dcpage_flushes_xcall);
+			atomic_inc(&dcpage_flushes_xcall);
 #endif
+		}
 	}
 
 	put_cpu();
@@ -980,66 +932,41 @@ void smp_flush_dcache_page_impl(struct page *page, int cpu)
 
 void flush_dcache_page_all(struct mm_struct *mm, struct page *page)
 {
-	void *pg_addr = page_address(page);
-	cpumask_t mask = cpu_online_map;
-	u64 data0;
+	void *pg_addr;
 	int this_cpu;
+	u64 data0;
 
 	if (tlb_type == hypervisor)
 		return;
 
 	this_cpu = get_cpu();
 
-	cpu_clear(this_cpu, mask);
-
 #ifdef CONFIG_DEBUG_DCFLUSH
 	atomic_inc(&dcpage_flushes);
 #endif
-	if (cpus_empty(mask))
-		goto flush_self;
+	data0 = 0;
+	pg_addr = page_address(page);
 	if (tlb_type == spitfire) {
 		data0 = ((u64)&xcall_flush_dcache_page_spitfire);
 		if (page_mapping(page) != NULL)
 			data0 |= ((u64)1 << 32);
-		spitfire_xcall_deliver(data0,
-				       __pa(pg_addr),
-				       (u64) pg_addr,
-				       mask);
 	} else if (tlb_type == cheetah || tlb_type == cheetah_plus) {
 #ifdef DCACHE_ALIASING_POSSIBLE
 		data0 = ((u64)&xcall_flush_dcache_page_cheetah);
-		cheetah_xcall_deliver(data0,
-				      __pa(pg_addr),
-				      0, mask);
 #endif
 	}
+	if (data0) {
+		xcall_deliver(data0, __pa(pg_addr),
+			      (u64) pg_addr, &cpu_online_map);
 #ifdef CONFIG_DEBUG_DCFLUSH
-	atomic_inc(&dcpage_flushes_xcall);
+		atomic_inc(&dcpage_flushes_xcall);
 #endif
- flush_self:
+	}
 	__local_flush_dcache_page(page);
 
 	put_cpu();
 }
 
-static void __smp_receive_signal_mask(cpumask_t mask)
-{
-	smp_cross_call_masked(&xcall_receive_signal, 0, 0, 0, mask);
-}
-
-void smp_receive_signal(int cpu)
-{
-	cpumask_t mask = cpumask_of_cpu(cpu);
-
-	if (cpu_online(cpu))
-		__smp_receive_signal_mask(mask);
-}
-
-void smp_receive_signal_client(int irq, struct pt_regs *regs)
-{
-	clear_softint(1 << irq);
-}
-
 void smp_new_mmu_context_version_client(int irq, struct pt_regs *regs)
 {
 	struct mm_struct *mm;
@@ -1078,11 +1005,6 @@ void kgdb_roundup_cpus(unsigned long flags)
 }
 #endif
 
-void smp_report_regs(void)
-{
-	smp_cross_call(&xcall_report_regs, 0, 0, 0);
-}
-
 #ifdef CONFIG_MAGIC_SYSRQ
 void smp_fetch_global_regs(void)
 {
@@ -1145,7 +1067,7 @@ void smp_flush_tlb_mm(struct mm_struct *mm)
 
 	smp_cross_call_masked(&xcall_flush_tlb_mm,
 			      ctx, 0, 0,
-			      mm->cpu_vm_mask);
+			      &mm->cpu_vm_mask);
 
 local_flush_and_out:
 	__flush_tlb_mm(ctx, SECONDARY_CONTEXT);
@@ -1163,7 +1085,7 @@ void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long
 	else
 		smp_cross_call_masked(&xcall_flush_tlb_pending,
 				      ctx, nr, (unsigned long) vaddrs,
-				      mm->cpu_vm_mask);
+				      &mm->cpu_vm_mask);
 
 	__flush_tlb_pending(ctx, nr, vaddrs);
 
@@ -1264,6 +1186,16 @@ void __devinit smp_prepare_boot_cpu(void)
 {
 }
 
+void __init smp_setup_processor_id(void)
+{
+	if (tlb_type == spitfire)
+		xcall_deliver_impl = spitfire_xcall_deliver;
+	else if (tlb_type == cheetah || tlb_type == cheetah_plus)
+		xcall_deliver_impl = cheetah_xcall_deliver;
+	else
+		xcall_deliver_impl = hypervisor_xcall_deliver;
+}
+
 void __devinit smp_fill_in_sib_core_maps(void)
 {
 	unsigned int i;
@@ -1432,7 +1364,13 @@ void __init smp_cpus_done(unsigned int max_cpus)
 
 void smp_send_reschedule(int cpu)
 {
-	smp_receive_signal(cpu);
+	xcall_deliver((u64) &xcall_receive_signal, 0, 0,
+		      &cpumask_of_cpu(cpu));
+}
+
+void smp_receive_signal_client(int irq, struct pt_regs *regs)
+{
+	clear_softint(1 << irq);
 }
 
 /* This is a nop because we capture all other cpus
diff --git a/arch/sparc64/kernel/sparc64_ksyms.c b/arch/sparc64/kernel/sparc64_ksyms.c
index 49d3ea50c247..0804f71df6cb 100644
--- a/arch/sparc64/kernel/sparc64_ksyms.c
+++ b/arch/sparc64/kernel/sparc64_ksyms.c
@@ -68,7 +68,6 @@ extern void *__memscan_zero(void *, size_t);
 extern void *__memscan_generic(void *, int, size_t);
 extern int __memcmp(const void *, const void *, __kernel_size_t);
 extern __kernel_size_t strlen(const char *);
-extern void show_regs(struct pt_regs *);
 extern void syscall_trace(struct pt_regs *, int);
 extern void sys_sigsuspend(void);
 extern int compat_sys_ioctl(unsigned int fd, unsigned int cmd, u32 arg);
@@ -108,8 +107,6 @@ EXPORT_SYMBOL(__read_unlock);
 EXPORT_SYMBOL(__write_lock);
 EXPORT_SYMBOL(__write_unlock);
 EXPORT_SYMBOL(__write_trylock);
-
-EXPORT_SYMBOL(smp_call_function);
 #endif /* CONFIG_SMP */
 
 #ifdef CONFIG_MCOUNT
diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c
index ac1bff58c1ac..39749e32dc7e 100644
--- a/arch/sparc64/kernel/sys_sparc.c
+++ b/arch/sparc64/kernel/sys_sparc.c
@@ -418,7 +418,7 @@ asmlinkage long sparc_pipe(struct pt_regs *regs)
 	int fd[2];
 	int error;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (error)
 		goto out;
 	regs->u_regs[UREG_I1] = fd[1];
@@ -542,7 +542,7 @@ asmlinkage long sparc64_personality(unsigned long personality)
 	return ret;
 }
 
-int sparc64_mmap_check(unsigned long addr, unsigned long len)
+int sparc_mmap_check(unsigned long addr, unsigned long len)
 {
 	if (test_thread_flag(TIF_32BIT)) {
 		if (len >= STACK_TOP32)
@@ -614,9 +614,9 @@ asmlinkage unsigned long sys64_mremap(unsigned long addr,
 		goto out;
 	if (unlikely(new_len >= VA_EXCLUDE_START))
 		goto out;
-	if (unlikely(sparc64_mmap_check(addr, old_len)))
+	if (unlikely(sparc_mmap_check(addr, old_len)))
 		goto out;
-	if (unlikely(sparc64_mmap_check(new_addr, new_len)))
+	if (unlikely(sparc_mmap_check(new_addr, new_len)))
 		goto out;
 
 	down_write(&current->mm->mmap_sem);
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index ba5bd626b39e..97b77fb5c50e 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -359,7 +359,8 @@ int cp_compat_stat(struct kstat *stat, struct compat_stat __user *statbuf)
 	return err;
 }
 
-int cp_compat_stat64(struct kstat *stat, struct compat_stat64 __user *statbuf)
+static int cp_compat_stat64(struct kstat *stat,
+			    struct compat_stat64 __user *statbuf)
 {
 	int err;
 
@@ -870,9 +871,9 @@ asmlinkage unsigned long sys32_mremap(unsigned long addr,
 	unsigned long ret = -EINVAL;
 	unsigned long new_addr = __new_addr;
 
-	if (unlikely(sparc64_mmap_check(addr, old_len)))
+	if (unlikely(sparc_mmap_check(addr, old_len)))
 		goto out;
-	if (unlikely(sparc64_mmap_check(new_addr, new_len)))
+	if (unlikely(sparc_mmap_check(new_addr, new_len)))
 		goto out;
 	down_write(&current->mm->mmap_sem);
 	ret = do_mremap(addr, old_len, new_len, flags, new_addr);
diff --git a/arch/sparc64/kernel/syscalls.S b/arch/sparc64/kernel/syscalls.S
index db19ed67acf6..a2f24270ed8a 100644
--- a/arch/sparc64/kernel/syscalls.S
+++ b/arch/sparc64/kernel/syscalls.S
@@ -162,6 +162,8 @@ linux_syscall_trace32:
 	add	%sp, PTREGS_OFF, %o0
 	call	syscall_trace
 	 clr	%o1
+	brnz,pn	%o0, 3f
+	 mov	-ENOSYS, %o0
 	srl	%i0, 0, %o0
 	srl	%i4, 0, %o4
 	srl	%i1, 0, %o1
@@ -173,6 +175,8 @@ linux_syscall_trace:
 	add	%sp, PTREGS_OFF, %o0
 	call	syscall_trace
 	 clr	%o1
+	brnz,pn	%o0, 3f
+	 mov	-ENOSYS, %o0
 	mov	%i0, %o0
 	mov	%i1, %o1
 	mov	%i2, %o2
diff --git a/arch/sparc64/kernel/sysfs.c b/arch/sparc64/kernel/sysfs.c
index e885034a6b73..84e5ce146713 100644
--- a/arch/sparc64/kernel/sysfs.c
+++ b/arch/sparc64/kernel/sysfs.c
@@ -14,7 +14,8 @@
 static DEFINE_PER_CPU(struct hv_mmu_statistics, mmu_stats) __attribute__((aligned(64)));
 
 #define SHOW_MMUSTAT_ULONG(NAME) \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+			struct sysdev_attribute *attr, char *buf) \
 { \
 	struct hv_mmu_statistics *p = &per_cpu(mmu_stats, dev->id); \
 	return sprintf(buf, "%lu\n", p->NAME); \
@@ -135,13 +136,16 @@ static unsigned long write_mmustat_enable(unsigned long val)
 	return sun4v_mmustat_conf(ra, &orig_ra);
 }
 
-static ssize_t show_mmustat_enable(struct sys_device *s, char *buf)
+static ssize_t show_mmustat_enable(struct sys_device *s,
+				struct sysdev_attribute *attr, char *buf)
 {
 	unsigned long val = run_on_cpu(s->id, read_mmustat_enable, 0);
 	return sprintf(buf, "%lx\n", val);
 }
 
-static ssize_t store_mmustat_enable(struct sys_device *s, const char *buf, size_t count)
+static ssize_t store_mmustat_enable(struct sys_device *s,
+			struct sysdev_attribute *attr, const char *buf,
+			size_t count)
 {
 	unsigned long val, err;
 	int ret = sscanf(buf, "%ld", &val);
@@ -179,14 +183,16 @@ static void unregister_mmu_stats(struct sys_device *s)
 #endif
 
 #define SHOW_CPUDATA_ULONG_NAME(NAME, MEMBER) \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+		struct sysdev_attribute *attr, char *buf) \
 { \
 	cpuinfo_sparc *c = &cpu_data(dev->id); \
 	return sprintf(buf, "%lu\n", c->MEMBER); \
 }
 
 #define SHOW_CPUDATA_UINT_NAME(NAME, MEMBER) \
-static ssize_t show_##NAME(struct sys_device *dev, char *buf) \
+static ssize_t show_##NAME(struct sys_device *dev, \
+		struct sysdev_attribute *attr, char *buf) \
 { \
 	cpuinfo_sparc *c = &cpu_data(dev->id); \
 	return sprintf(buf, "%u\n", c->MEMBER); \
diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S
index 8b5282d433c4..1095bf4c5100 100644
--- a/arch/sparc64/kernel/systbls.S
+++ b/arch/sparc64/kernel/systbls.S
@@ -81,7 +81,8 @@ sys_call_table32:
 /*300*/	.word compat_sys_set_robust_list, compat_sys_get_robust_list, compat_sys_migrate_pages, compat_sys_mbind, compat_sys_get_mempolicy
 	.word compat_sys_set_mempolicy, compat_sys_kexec_load, compat_sys_move_pages, sys_getcpu, compat_sys_epoll_pwait
 /*310*/	.word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
-	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime
+	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1
 
 #endif /* CONFIG_COMPAT */
 
@@ -154,4 +155,5 @@ sys_call_table:
 /*300*/	.word sys_set_robust_list, sys_get_robust_list, sys_migrate_pages, sys_mbind, sys_get_mempolicy
 	.word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait
 /*310*/	.word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
-	.word sys_timerfd_settime, sys_timerfd_gettime
+	.word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
+/*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1
diff --git a/arch/sparc64/kernel/time.c b/arch/sparc64/kernel/time.c
index bedc4c159b1c..a0c6a97eec6e 100644
--- a/arch/sparc64/kernel/time.c
+++ b/arch/sparc64/kernel/time.c
@@ -884,6 +884,16 @@ static struct notifier_block sparc64_cpufreq_notifier_block = {
 	.notifier_call	= sparc64_cpufreq_notifier
 };
 
+static int __init register_sparc64_cpufreq_notifier(void)
+{
+
+	cpufreq_register_notifier(&sparc64_cpufreq_notifier_block,
+				  CPUFREQ_TRANSITION_NOTIFIER);
+	return 0;
+}
+
+core_initcall(register_sparc64_cpufreq_notifier);
+
 #endif /* CONFIG_CPU_FREQ */
 
 static int sparc64_next_event(unsigned long delta,
@@ -1050,11 +1060,6 @@ void __init time_init(void)
 	       sparc64_clockevent.mult, sparc64_clockevent.shift);
 
 	setup_sparc64_timer();
-
-#ifdef CONFIG_CPU_FREQ
-	cpufreq_register_notifier(&sparc64_cpufreq_notifier_block,
-				  CPUFREQ_TRANSITION_NOTIFIER);
-#endif
 }
 
 unsigned long long sched_clock(void)
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index 369749262653..404e8561e2d0 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -1,6 +1,6 @@
 /* arch/sparc64/kernel/traps.c
  *
- * Copyright (C) 1995,1997 David S. Miller (davem@davemloft.net)
+ * Copyright (C) 1995,1997,2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997,1999,2000 Jakub Jelinek (jakub@redhat.com)
  */
 
@@ -11,7 +11,6 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
-#include <linux/kallsyms.h>
 #include <linux/signal.h>
 #include <linux/smp.h>
 #include <linux/mm.h>
@@ -37,9 +36,6 @@
 #include <asm/processor.h>
 #include <asm/timer.h>
 #include <asm/head.h>
-#ifdef CONFIG_KMOD
-#include <linux/kmod.h>
-#endif
 #include <asm/prom.h>
 
 #include "entry.h"
@@ -74,7 +70,7 @@ static void dump_tl1_traplog(struct tl1_traplog *p)
 		       i + 1,
 		       p->trapstack[i].tstate, p->trapstack[i].tpc,
 		       p->trapstack[i].tnpc, p->trapstack[i].tt);
-		print_symbol("TRAPLOG: TPC<%s>\n", p->trapstack[i].tpc);
+		printk("TRAPLOG: TPC<%pS>\n", (void *) p->trapstack[i].tpc);
 	}
 }
 
@@ -1081,7 +1077,7 @@ static void cheetah_log_errors(struct pt_regs *regs, struct cheetah_err_info *in
 	       regs->tpc, regs->tnpc, regs->u_regs[UREG_I7], regs->tstate);
 	printk("%s" "ERROR(%d): ",
 	       (recoverable ? KERN_WARNING : KERN_CRIT), smp_processor_id());
-	print_symbol("TPC<%s>\n", regs->tpc);
+	printk("TPC<%pS>\n", (void *) regs->tpc);
 	printk("%s" "ERROR(%d): M_SYND(%lx),  E_SYND(%lx)%s%s\n",
 	       (recoverable ? KERN_WARNING : KERN_CRIT), smp_processor_id(),
 	       (afsr & CHAFSR_M_SYNDROME) >> CHAFSR_M_SYNDROME_SHIFT,
@@ -1689,7 +1685,7 @@ void cheetah_plus_parity_error(int type, struct pt_regs *regs)
 		       smp_processor_id(),
 		       (type & 0x1) ? 'I' : 'D',
 		       regs->tpc);
-		print_symbol(KERN_EMERG "TPC<%s>\n", regs->tpc);
+		printk(KERN_EMERG "TPC<%pS>\n", (void *) regs->tpc);
 		panic("Irrecoverable Cheetah+ parity error.");
 	}
 
@@ -1697,7 +1693,7 @@ void cheetah_plus_parity_error(int type, struct pt_regs *regs)
 	       smp_processor_id(),
 	       (type & 0x1) ? 'I' : 'D',
 	       regs->tpc);
-	print_symbol(KERN_WARNING "TPC<%s>\n", regs->tpc);
+	printk(KERN_WARNING "TPC<%pS>\n", (void *) regs->tpc);
 }
 
 struct sun4v_error_entry {
@@ -1781,7 +1777,7 @@ static void sun4v_log_error(struct pt_regs *regs, struct sun4v_error_entry *ent,
 	       pfx,
 	       ent->err_raddr, ent->err_size, ent->err_cpu);
 
-	__show_regs(regs);
+	show_regs(regs);
 
 	if ((cnt = atomic_read(ocnt)) != 0) {
 		atomic_set(ocnt, 0);
@@ -1904,9 +1900,10 @@ void sun4v_itlb_error_report(struct pt_regs *regs, int tl)
 
 	printk(KERN_EMERG "SUN4V-ITLB: Error at TPC[%lx], tl %d\n",
 	       regs->tpc, tl);
-	print_symbol(KERN_EMERG "SUN4V-ITLB: TPC<%s>\n", regs->tpc);
+	printk(KERN_EMERG "SUN4V-ITLB: TPC<%pS>\n", (void *) regs->tpc);
 	printk(KERN_EMERG "SUN4V-ITLB: O7[%lx]\n", regs->u_regs[UREG_I7]);
-	print_symbol(KERN_EMERG "SUN4V-ITLB: O7<%s>\n", regs->u_regs[UREG_I7]);
+	printk(KERN_EMERG "SUN4V-ITLB: O7<%pS>\n",
+	       (void *) regs->u_regs[UREG_I7]);
 	printk(KERN_EMERG "SUN4V-ITLB: vaddr[%lx] ctx[%lx] "
 	       "pte[%lx] error[%lx]\n",
 	       sun4v_err_itlb_vaddr, sun4v_err_itlb_ctx,
@@ -1927,9 +1924,10 @@ void sun4v_dtlb_error_report(struct pt_regs *regs, int tl)
 
 	printk(KERN_EMERG "SUN4V-DTLB: Error at TPC[%lx], tl %d\n",
 	       regs->tpc, tl);
-	print_symbol(KERN_EMERG "SUN4V-DTLB: TPC<%s>\n", regs->tpc);
+	printk(KERN_EMERG "SUN4V-DTLB: TPC<%pS>\n", (void *) regs->tpc);
 	printk(KERN_EMERG "SUN4V-DTLB: O7[%lx]\n", regs->u_regs[UREG_I7]);
-	print_symbol(KERN_EMERG "SUN4V-DTLB: O7<%s>\n", regs->u_regs[UREG_I7]);
+	printk(KERN_EMERG "SUN4V-DTLB: O7<%pS>\n",
+	       (void *) regs->u_regs[UREG_I7]);
 	printk(KERN_EMERG "SUN4V-DTLB: vaddr[%lx] ctx[%lx] "
 	       "pte[%lx] error[%lx]\n",
 	       sun4v_err_dtlb_vaddr, sun4v_err_dtlb_ctx,
@@ -2111,10 +2109,7 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
 	fp = ksp + STACK_BIAS;
 	thread_base = (unsigned long) tp;
 
-	printk("Call Trace:");
-#ifdef CONFIG_KALLSYMS
-	printk("\n");
-#endif
+	printk("Call Trace:\n");
 	do {
 		struct sparc_stackf *sf;
 		struct pt_regs *regs;
@@ -2137,12 +2132,8 @@ void show_stack(struct task_struct *tsk, unsigned long *_ksp)
 			fp = (unsigned long)sf->fp + STACK_BIAS;
 		}
 
-		printk(" [%016lx] ", pc);
-		print_symbol("%s\n", pc);
+		printk(" [%016lx] %pS\n", pc, (void *) pc);
 	} while (++count < 16);
-#ifndef CONFIG_KALLSYMS
-	printk("\n");
-#endif
 }
 
 void dump_stack(void)
@@ -2186,7 +2177,6 @@ static inline struct reg_window *kernel_stack_up(struct reg_window *rw)
 void die_if_kernel(char *str, struct pt_regs *regs)
 {
 	static int die_counter;
-	extern void smp_report_regs(void);
 	int count = 0;
 	
 	/* Amuse the user. */
@@ -2199,7 +2189,7 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 	printk("%s(%d): %s [#%d]\n", current->comm, task_pid_nr(current), str, ++die_counter);
 	notify_die(DIE_OOPS, str, regs, 0, 255, SIGSEGV);
 	__asm__ __volatile__("flushw");
-	__show_regs(regs);
+	show_regs(regs);
 	add_taint(TAINT_DIE);
 	if (regs->tstate & TSTATE_PRIV) {
 		struct reg_window *rw = (struct reg_window *)
@@ -2211,9 +2201,8 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 		while (rw &&
 		       count++ < 30&&
 		       is_kernel_stack(current, rw)) {
-			printk("Caller[%016lx]", rw->ins[7]);
-			print_symbol(": %s", rw->ins[7]);
-			printk("\n");
+			printk("Caller[%016lx]: %pS\n", rw->ins[7],
+			       (void *) rw->ins[7]);
 
 			rw = kernel_stack_up(rw);
 		}
@@ -2225,11 +2214,6 @@ void die_if_kernel(char *str, struct pt_regs *regs)
 		}
 		user_instruction_dump ((unsigned int __user *) regs->tpc);
 	}
-#if 0
-#ifdef CONFIG_SMP
-	smp_report_regs();
-#endif
-#endif                                                	
 	if (regs->tstate & TSTATE_PRIV)
 		do_exit(SIGKILL);
 	do_exit(SIGSEGV);
diff --git a/arch/sparc64/kernel/ttable.S b/arch/sparc64/kernel/ttable.S
index 450053af039e..1ade3d6fb7fc 100644
--- a/arch/sparc64/kernel/ttable.S
+++ b/arch/sparc64/kernel/ttable.S
@@ -58,7 +58,12 @@ tl0_irq3:	BTRAP(0x43)
 tl0_irq4:	BTRAP(0x44)
 #endif
 tl0_irq5:	TRAP_IRQ(handler_irq, 5)
-tl0_irq6:	BTRAP(0x46) BTRAP(0x47) BTRAP(0x48) BTRAP(0x49)
+#ifdef CONFIG_SMP
+tl0_irq6:	TRAP_IRQ(smp_call_function_single_client, 6)
+#else
+tl0_irq6:	BTRAP(0x46)
+#endif
+tl0_irq7:	BTRAP(0x47) BTRAP(0x48) BTRAP(0x49)
 tl0_irq10:	BTRAP(0x4a) BTRAP(0x4b) BTRAP(0x4c) BTRAP(0x4d)
 tl0_irq14:	TRAP_IRQ(timer_interrupt, 14)
 tl0_irq15:	TRAP_IRQ(handler_irq, 15)
diff --git a/arch/sparc64/kernel/unaligned.c b/arch/sparc64/kernel/unaligned.c
index afa7fc4f5193..203ddfad9f27 100644
--- a/arch/sparc64/kernel/unaligned.c
+++ b/arch/sparc64/kernel/unaligned.c
@@ -2,7 +2,7 @@
  * unaligned.c: Unaligned load/store trap handling with special
  *              cases for the kernel to do them more quickly.
  *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996,2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
  */
 
@@ -20,7 +20,6 @@
 #include <asm/uaccess.h>
 #include <linux/smp.h>
 #include <linux/bitops.h>
-#include <linux/kallsyms.h>
 #include <asm/fpumacro.h>
 
 /* #define DEBUG_MNA */
@@ -289,8 +288,8 @@ static void log_unaligned(struct pt_regs *regs)
 	if (count < 5) {
 		last_time = jiffies;
 		count++;
-		printk("Kernel unaligned access at TPC[%lx] ", regs->tpc);
-		print_symbol("%s\n", regs->tpc);
+		printk("Kernel unaligned access at TPC[%lx] %pS\n",
+		       regs->tpc, (void *) regs->tpc);
 	}
 }
 
diff --git a/arch/sparc64/kernel/vio.c b/arch/sparc64/kernel/vio.c
index e78b3517940b..a490077891a4 100644
--- a/arch/sparc64/kernel/vio.c
+++ b/arch/sparc64/kernel/vio.c
@@ -224,7 +224,7 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
 	if (!strcmp(type, "domain-services-port"))
 		bus_id_name = "ds";
 
-	if (strlen(bus_id_name) >= KOBJ_NAME_LEN - 4) {
+	if (strlen(bus_id_name) >= BUS_ID_SIZE - 4) {
 		printk(KERN_ERR "VIO: bus_id_name [%s] is too long.\n",
 		       bus_id_name);
 		return NULL;
@@ -260,16 +260,14 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
 	vio_fill_channel_info(hp, mp, vdev);
 
 	if (!id) {
-		snprintf(vdev->dev.bus_id, BUS_ID_SIZE, "%s",
-			 bus_id_name);
+		dev_set_name(&vdev->dev, "%s", bus_id_name);
 		vdev->dev_no = ~(u64)0;
 	} else if (!cfg_handle) {
-		snprintf(vdev->dev.bus_id, BUS_ID_SIZE, "%s-%lu",
-			 bus_id_name, *id);
+		dev_set_name(&vdev->dev, "%s-%lu", bus_id_name, *id);
 		vdev->dev_no = *id;
 	} else {
-		snprintf(vdev->dev.bus_id, BUS_ID_SIZE, "%s-%lu-%lu",
-			 bus_id_name, *cfg_handle, *id);
+		dev_set_name(&vdev->dev, "%s-%lu-%lu", bus_id_name,
+			     *cfg_handle, *id);
 		vdev->dev_no = *cfg_handle;
 	}
 
@@ -292,12 +290,12 @@ static struct vio_dev *vio_create_one(struct mdesc_handle *hp, u64 mp,
 	}
 	vdev->dp = dp;
 
-	printk(KERN_INFO "VIO: Adding device %s\n", vdev->dev.bus_id);
+	printk(KERN_INFO "VIO: Adding device %s\n", dev_name(&vdev->dev));
 
 	err = device_register(&vdev->dev);
 	if (err) {
 		printk(KERN_ERR "VIO: Could not register device %s, err=%d\n",
-		       vdev->dev.bus_id, err);
+		       dev_name(&vdev->dev), err);
 		kfree(vdev);
 		return NULL;
 	}
@@ -330,7 +328,7 @@ static void vio_remove(struct mdesc_handle *hp, u64 node)
 	dev = device_find_child(&root_vdev->dev, (void *) node,
 				vio_md_node_match);
 	if (dev) {
-		printk(KERN_INFO "VIO: Removing device %s\n", dev->bus_id);
+		printk(KERN_INFO "VIO: Removing device %s\n", dev_name(dev));
 
 		device_unregister(dev);
 	}
diff --git a/arch/sparc64/lib/copy_page.S b/arch/sparc64/lib/copy_page.S
index 37460666a5c3..b243d3b606ba 100644
--- a/arch/sparc64/lib/copy_page.S
+++ b/arch/sparc64/lib/copy_page.S
@@ -25,9 +25,9 @@
 
 #define	DCACHE_SIZE	(PAGE_SIZE * 2)
 
-#if (PAGE_SHIFT == 13) || (PAGE_SHIFT == 19)
+#if (PAGE_SHIFT == 13)
 #define PAGE_SIZE_REM	0x80
-#elif (PAGE_SHIFT == 16) || (PAGE_SHIFT == 22)
+#elif (PAGE_SHIFT == 16)
 #define PAGE_SIZE_REM	0x100
 #else
 #error Wrong PAGE_SHIFT specified
@@ -198,7 +198,7 @@ cheetah_copy_page_insn:
 	cmp		%o2, PAGE_SIZE_REM
 	bne,pt		%xcc, 1b
 	 add		%o0, 0x40, %o0
-#if (PAGE_SHIFT == 16) || (PAGE_SHIFT == 22)
+#if (PAGE_SHIFT == 16)
 	TOUCH(f0, f2, f4, f6, f8, f10, f12, f14)
 	ldda		[%o1] ASI_BLK_P, %f32
 	stda		%f48, [%o0] %asi
diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c
index 236f4d228d2b..ea7d7ae76bc2 100644
--- a/arch/sparc64/mm/fault.c
+++ b/arch/sparc64/mm/fault.c
@@ -1,7 +1,7 @@
 /*
  * arch/sparc64/mm/fault.c: Page fault handlers for the 64-bit Sparc.
  *
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996, 2008 David S. Miller (davem@davemloft.net)
  * Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
  */
 
@@ -18,7 +18,6 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/kprobes.h>
-#include <linux/kallsyms.h>
 #include <linux/kdebug.h>
 
 #include <asm/page.h>
@@ -115,7 +114,7 @@ static void bad_kernel_pc(struct pt_regs *regs, unsigned long vaddr)
 	printk(KERN_CRIT "OOPS: Bogus kernel PC [%016lx] in fault handler\n",
 	       regs->tpc);
 	printk(KERN_CRIT "OOPS: RPC [%016lx]\n", regs->u_regs[15]);
-	print_symbol("RPC: <%s>\n", regs->u_regs[15]);
+	printk("OOPS: RPC <%pS>\n", (void *) regs->u_regs[15]);
 	printk(KERN_CRIT "OOPS: Fault was to vaddr[%lx]\n", vaddr);
 	dump_stack();
 	unhandled_fault(regs->tpc, current, regs);
diff --git a/arch/sparc64/mm/hugetlbpage.c b/arch/sparc64/mm/hugetlbpage.c
index 6cfab2e4d340..f27d10369e0c 100644
--- a/arch/sparc64/mm/hugetlbpage.c
+++ b/arch/sparc64/mm/hugetlbpage.c
@@ -175,7 +175,7 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 		return -ENOMEM;
 
 	if (flags & MAP_FIXED) {
-		if (prepare_hugepage_range(addr, len))
+		if (prepare_hugepage_range(file, addr, len))
 			return -EINVAL;
 		return addr;
 	}
@@ -195,7 +195,8 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 				pgoff, flags);
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -294,6 +295,11 @@ int pmd_huge(pmd_t pmd)
 	return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 			     pmd_t *pmd, int write)
 {
@@ -344,7 +350,7 @@ void hugetlb_prefault_arch_hook(struct mm_struct *mm)
 			 * also executing in this address space.
 			 */
 			mm->context.sparc64_ctx_val = ctx;
-			on_each_cpu(context_reload, mm, 0, 0);
+			on_each_cpu(context_reload, mm, 0);
 		}
 		spin_unlock(&ctx_alloc_lock);
 	}
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index 84898c44dd4d..4e821b3ecb03 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -392,51 +392,6 @@ void __kprobes flush_icache_range(unsigned long start, unsigned long end)
 	}
 }
 
-void show_mem(void)
-{
-	unsigned long total = 0, reserved = 0;
-	unsigned long shared = 0, cached = 0;
-	pg_data_t *pgdat;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	printk(KERN_INFO "Free swap:       %6ldkB\n",
-	       nr_swap_pages << (PAGE_SHIFT-10));
-	for_each_online_pgdat(pgdat) {
-		unsigned long i, flags;
-
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; i++) {
-			struct page *page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-
-	printk(KERN_INFO "%lu pages of RAM\n", total);
-	printk(KERN_INFO "%lu reserved pages\n", reserved);
-	printk(KERN_INFO "%lu pages shared\n", shared);
-	printk(KERN_INFO "%lu pages swap cached\n", cached);
-
-	printk(KERN_INFO "%lu pages dirty\n",
-	       global_page_state(NR_FILE_DIRTY));
-	printk(KERN_INFO "%lu pages writeback\n",
-	       global_page_state(NR_WRITEBACK));
-	printk(KERN_INFO "%lu pages mapped\n",
-	       global_page_state(NR_FILE_MAPPED));
-	printk(KERN_INFO "%lu pages slab\n",
-		global_page_state(NR_SLAB_RECLAIMABLE) +
-		global_page_state(NR_SLAB_UNRECLAIMABLE));
-	printk(KERN_INFO "%lu pages pagetables\n",
-	       global_page_state(NR_PAGETABLE));
-}
-
 void mmu_info(struct seq_file *m)
 {
 	if (tlb_type == cheetah)
@@ -788,7 +743,6 @@ int numa_cpu_lookup_table[NR_CPUS];
 cpumask_t numa_cpumask_lookup_table[MAX_NUMNODES];
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
-static bootmem_data_t plat_node_bdata[MAX_NUMNODES];
 
 struct mdesc_mblock {
 	u64	base;
@@ -871,7 +825,7 @@ static void __init allocate_node_data(int nid)
 	NODE_DATA(nid) = __va(paddr);
 	memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
-	NODE_DATA(nid)->bdata = &plat_node_bdata[nid];
+	NODE_DATA(nid)->bdata = &bootmem_node_data[nid];
 #endif
 
 	p = NODE_DATA(nid);
diff --git a/arch/sparc64/mm/tsb.c b/arch/sparc64/mm/tsb.c
index fe70c8a557b5..587f8efb2e05 100644
--- a/arch/sparc64/mm/tsb.c
+++ b/arch/sparc64/mm/tsb.c
@@ -1,9 +1,10 @@
 /* arch/sparc64/mm/tsb.c
  *
- * Copyright (C) 2006 David S. Miller <davem@davemloft.net>
+ * Copyright (C) 2006, 2008 David S. Miller <davem@davemloft.net>
  */
 
 #include <linux/kernel.h>
+#include <linux/preempt.h>
 #include <asm/system.h>
 #include <asm/page.h>
 #include <asm/tlbflush.h>
@@ -96,12 +97,6 @@ void flush_tsb_user(struct mmu_gather *mp)
 #elif defined(CONFIG_SPARC64_PAGE_SIZE_64KB)
 #define HV_PGSZ_IDX_BASE	HV_PGSZ_IDX_64K
 #define HV_PGSZ_MASK_BASE	HV_PGSZ_MASK_64K
-#elif defined(CONFIG_SPARC64_PAGE_SIZE_512KB)
-#define HV_PGSZ_IDX_BASE	HV_PGSZ_IDX_512K
-#define HV_PGSZ_MASK_BASE	HV_PGSZ_MASK_512K
-#elif defined(CONFIG_SPARC64_PAGE_SIZE_4MB)
-#define HV_PGSZ_IDX_BASE	HV_PGSZ_IDX_4MB
-#define HV_PGSZ_MASK_BASE	HV_PGSZ_MASK_4MB
 #else
 #error Broken base page size setting...
 #endif
@@ -421,7 +416,9 @@ retry_tsb_alloc:
 		tsb_context_switch(mm);
 
 		/* Now force other processors to do the same.  */
+		preempt_disable();
 		smp_tsb_sync(mm);
+		preempt_enable();
 
 		/* Now it is safe to free the old tsb.  */
 		kmem_cache_free(tsb_caches[old_cache_index], old_tsb);
diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S
index 9bb2d90a9df6..ff1dc44d363e 100644
--- a/arch/sparc64/mm/ultra.S
+++ b/arch/sparc64/mm/ultra.S
@@ -480,41 +480,6 @@ xcall_sync_tick:
 	b		rtrap_xcall
 	 ldx		[%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
 
-	/* NOTE: This is SPECIAL!!  We do etrap/rtrap however
-	 *       we choose to deal with the "BH's run with
-	 *       %pil==15" problem (described in asm/pil.h)
-	 *       by just invoking rtrap directly past where
-	 *       BH's are checked for.
-	 *
-	 *       We do it like this because we do not want %pil==15
-	 *       lockups to prevent regs being reported.
-	 */
-	.globl		xcall_report_regs
-xcall_report_regs:
-
-661:	rdpr		%pstate, %g2
-	wrpr		%g2, PSTATE_IG | PSTATE_AG, %pstate
-	.section	.sun4v_2insn_patch, "ax"
-	.word		661b
-	nop
-	nop
-	.previous
-
-	rdpr		%pil, %g2
-	wrpr		%g0, 15, %pil
-	sethi		%hi(109f), %g7
-	b,pt		%xcc, etrap_irq
-109:	 or		%g7, %lo(109b), %g7
-#ifdef CONFIG_TRACE_IRQFLAGS
-	call		trace_hardirqs_off
-	 nop
-#endif
-	call		__show_regs
-	 add		%sp, PTREGS_OFF, %o0
-	/* Has to be a non-v9 branch due to the large distance. */
-	b		rtrap_xcall
-	 ldx		[%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
-
 #ifdef CONFIG_MAGIC_SYSRQ
 	.globl		xcall_fetch_glob_regs
 xcall_fetch_glob_regs:
@@ -531,6 +496,13 @@ xcall_fetch_glob_regs:
 	stx		%g7, [%g1 + GR_SNAP_TNPC]
 	stx		%o7, [%g1 + GR_SNAP_O7]
 	stx		%i7, [%g1 + GR_SNAP_I7]
+	/* Don't try this at home kids... */
+	rdpr		%cwp, %g2
+	sub		%g2, 1, %g7
+	wrpr		%g7, %cwp
+	mov		%i7, %g7
+	wrpr		%g2, %cwp
+	stx		%g7, [%g1 + GR_SNAP_RPC]
 	sethi		%hi(trap_block), %g7
 	or		%g7, %lo(trap_block), %g7
 	sllx		%g2, TRAP_BLOCK_SZ_SHIFT, %g2
@@ -688,6 +660,11 @@ xcall_call_function:
 	wr		%g0, (1 << PIL_SMP_CALL_FUNC), %set_softint
 	retry
 
+	.globl		xcall_call_function_single
+xcall_call_function_single:
+	wr		%g0, (1 << PIL_SMP_CALL_FUNC_SNGL), %set_softint
+	retry
+
 	.globl		xcall_receive_signal
 xcall_receive_signal:
 	wr		%g0, (1 << PIL_SMP_RECEIVE_SIGNAL), %set_softint
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 5047490fc299..d741f35d7b3a 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -362,19 +362,7 @@ static irqreturn_t line_write_interrupt(int irq, void *data)
 	if (tty == NULL)
 		return IRQ_NONE;
 
-	if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags) &&
-	   (tty->ldisc.write_wakeup != NULL))
-		(tty->ldisc.write_wakeup)(tty);
-
-	/*
-	 * BLOCKING mode
-	 * In blocking mode, everything sleeps on tty->write_wait.
-	 * Sleeping in the console driver would break non-blocking
-	 * writes.
-	 */
-
-	if (waitqueue_active(&tty->write_wait))
-		wake_up_interruptible(&tty->write_wait);
+	tty_wakeup(tty);
 	return IRQ_HANDLED;
 }
 
diff --git a/arch/um/include/init.h b/arch/um/include/init.h
index b00a95741d41..37dd097c16c0 100644
--- a/arch/um/include/init.h
+++ b/arch/um/include/init.h
@@ -45,6 +45,8 @@ typedef void (*exitcall_t)(void);
 # define __section(S) __attribute__ ((__section__(#S)))
 #endif
 
+#if __GNUC__ == 3
+
 #if __GNUC_MINOR__ >= 3
 # define __used			__attribute__((__used__))
 #else
@@ -52,6 +54,12 @@ typedef void (*exitcall_t)(void);
 #endif
 
 #else
+#if __GNUC__ == 4
+# define __used			__attribute__((__used__))
+#endif
+#endif
+
+#else
 #include <linux/compiler.h>
 #endif
 /* These are for everybody (although not all archs will actually
diff --git a/arch/um/include/irq_kern.h b/arch/um/include/irq_kern.h
index 4f775597fd5f..fba3895274f9 100644
--- a/arch/um/include/irq_kern.h
+++ b/arch/um/include/irq_kern.h
@@ -13,8 +13,6 @@ extern int um_request_irq(unsigned int irq, int fd, int type,
 			  irq_handler_t handler,
 			  unsigned long irqflags,  const char * devname,
 			  void *dev_id);
-extern int init_aio_irq(int irq, char *name,
-			irq_handler_t handler);
 
 #endif
 
diff --git a/arch/um/include/irq_user.h b/arch/um/include/irq_user.h
index e60b31873de1..c6c784df2673 100644
--- a/arch/um/include/irq_user.h
+++ b/arch/um/include/irq_user.h
@@ -21,8 +21,6 @@ struct irq_fd {
 enum { IRQ_READ, IRQ_WRITE };
 
 extern void sigio_handler(int sig, struct uml_pt_regs *regs);
-extern int activate_fd(int irq, int fd, int type, void *dev_id);
-extern void free_irq_by_irq_and_dev(unsigned int irq, void *dev_id);
 extern void free_irq_by_fd(int fd);
 extern void reactivate_fd(int fd, int irqnum);
 extern void deactivate_fd(int fd, int irqnum);
diff --git a/arch/um/include/skas/skas.h b/arch/um/include/skas/skas.h
index b073f8a86bd3..64d2c7443306 100644
--- a/arch/um/include/skas/skas.h
+++ b/arch/um/include/skas/skas.h
@@ -16,7 +16,6 @@ extern int user_thread(unsigned long stack, int flags);
 extern void new_thread_handler(void);
 extern void handle_syscall(struct uml_pt_regs *regs);
 extern int new_mm(unsigned long stack);
-extern void get_skas_faultinfo(int pid, struct faultinfo * fi);
 extern long execute_syscall_skas(void *r);
 extern unsigned long current_stub_stack(void);
 
diff --git a/arch/um/include/um_uaccess.h b/arch/um/include/um_uaccess.h
index 2b6fc8e0f071..45c04999d670 100644
--- a/arch/um/include/um_uaccess.h
+++ b/arch/um/include/um_uaccess.h
@@ -34,7 +34,6 @@ extern int copy_to_user(void __user *to, const void *from, int n);
 
 extern int __do_copy_to_user(void *to, const void *from, int n,
 			     void **fault_addr, jmp_buf **fault_catcher);
-extern void __do_copy(void *to, const void *from, int n);
 
 /*
  * strncpy_from_user: - Copy a NUL terminated string from userspace.
diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c
index 91587f8db340..3d7aad09b171 100644
--- a/arch/um/kernel/irq.c
+++ b/arch/um/kernel/irq.c
@@ -102,7 +102,7 @@ void sigio_handler(int sig, struct uml_pt_regs *regs)
 
 static DEFINE_SPINLOCK(irq_lock);
 
-int activate_fd(int irq, int fd, int type, void *dev_id)
+static int activate_fd(int irq, int fd, int type, void *dev_id)
 {
 	struct pollfd *tmp_pfd;
 	struct irq_fd *new_fd, *irq_fd;
@@ -216,7 +216,7 @@ static int same_irq_and_dev(struct irq_fd *irq, void *d)
 	return ((irq->irq == data->irq) && (irq->id == data->dev));
 }
 
-void free_irq_by_irq_and_dev(unsigned int irq, void *dev)
+static void free_irq_by_irq_and_dev(unsigned int irq, void *dev)
 {
 	struct irq_and_dev data = ((struct irq_and_dev) { .irq  = irq,
 							  .dev  = dev });
@@ -403,37 +403,6 @@ void __init init_IRQ(void)
 	}
 }
 
-int init_aio_irq(int irq, char *name, irq_handler_t handler)
-{
-	int fds[2], err;
-
-	err = os_pipe(fds, 1, 1);
-	if (err) {
-		printk(KERN_ERR "init_aio_irq - os_pipe failed, err = %d\n",
-		       -err);
-		goto out;
-	}
-
-	err = um_request_irq(irq, fds[0], IRQ_READ, handler,
-			     IRQF_DISABLED | IRQF_SAMPLE_RANDOM, name,
-			     (void *) (long) fds[0]);
-	if (err) {
-		printk(KERN_ERR "init_aio_irq - : um_request_irq failed, "
-		       "err = %d\n",
-		       err);
-		goto out_close;
-	}
-
-	err = fds[1];
-	goto out;
-
- out_close:
-	os_close_file(fds[0]);
-	os_close_file(fds[1]);
- out:
-	return err;
-}
-
 /*
  * IRQ stack entry and exit:
  *
diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index ccc02a616c22..836fc9b94707 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -18,7 +18,6 @@ EXPORT_SYMBOL(get_signals);
 EXPORT_SYMBOL(kernel_thread);
 EXPORT_SYMBOL(sys_waitpid);
 EXPORT_SYMBOL(flush_tlb_range);
-EXPORT_SYMBOL(arch_validate);
 
 EXPORT_SYMBOL(high_physmem);
 EXPORT_SYMBOL(empty_zero_page);
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index b0ee64622ff7..61d7e6138ff5 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -21,7 +21,7 @@
 /* allocated in paging_init, zeroed in mem_init, and unchanged thereafter */
 unsigned long *empty_zero_page = NULL;
 /* allocated in paging_init and unchanged thereafter */
-unsigned long *empty_bad_page = NULL;
+static unsigned long *empty_bad_page = NULL;
 
 /*
  * Initialized during boot, and readonly for initializing page tables
@@ -240,37 +240,6 @@ void __init paging_init(void)
 #endif
 }
 
-struct page *arch_validate(struct page *page, gfp_t mask, int order)
-{
-	unsigned long addr, zero = 0;
-	int i;
-
- again:
-	if (page == NULL)
-		return page;
-	if (PageHighMem(page))
-		return page;
-
-	addr = (unsigned long) page_address(page);
-	for (i = 0; i < (1 << order); i++) {
-		current->thread.fault_addr = (void *) addr;
-		if (__do_copy_to_user((void __user *) addr, &zero,
-				     sizeof(zero),
-				     &current->thread.fault_addr,
-				     &current->thread.fault_catcher)) {
-			if (!(mask & __GFP_WAIT))
-				return NULL;
-			else break;
-		}
-		addr += PAGE_SIZE;
-	}
-
-	if (i == (1 << order))
-		return page;
-	page = alloc_pages(mask, order);
-	goto again;
-}
-
 /*
  * This can't do anything because nothing in the kernel image can be freed
  * since it's not in kernel physical memory.
@@ -295,37 +264,6 @@ void free_initrd_mem(unsigned long start, unsigned long end)
 }
 #endif
 
-void show_mem(void)
-{
-	int pfn, total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int high_mem = 0;
-	struct page *page;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	printk(KERN_INFO "Free swap:       %6ldkB\n",
-	       nr_swap_pages<<(PAGE_SHIFT-10));
-	pfn = max_mapnr;
-	while (pfn-- > 0) {
-		page = pfn_to_page(pfn);
-		total++;
-		if (PageHighMem(page))
-			high_mem++;
-		if (PageReserved(page))
-			reserved++;
-		else if (PageSwapCache(page))
-			cached++;
-		else if (page_count(page))
-			shared += page_count(page) - 1;
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d pages of HIGHMEM\n", high_mem);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-}
-
 /* Allocate and free page tables. */
 
 pgd_t *pgd_alloc(struct mm_struct *mm)
diff --git a/arch/um/kernel/physmem.c b/arch/um/kernel/physmem.c
index 9757085a0220..a1a9090254c2 100644
--- a/arch/um/kernel/physmem.c
+++ b/arch/um/kernel/physmem.c
@@ -185,7 +185,7 @@ unsigned long find_iomem(char *driver, unsigned long *len_out)
 	return 0;
 }
 
-int setup_iomem(void)
+static int setup_iomem(void)
 {
 	struct iomem_region *region = iomem_regions;
 	unsigned long iomem_start = high_physmem + PAGE_SIZE;
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 83603cfbde81..a1c6d07cac3e 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -243,7 +243,7 @@ void default_idle(void)
 		if (need_resched())
 			schedule();
 
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		nsecs = disable_timer();
 		idle_sleep(nsecs);
 		tick_nohz_restart_sched_tick();
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 47b57b497d55..15e8b7c4de13 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -225,7 +225,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 	return ret;
 }
 
-void send_sigtrap(struct task_struct *tsk, struct uml_pt_regs *regs,
+static void send_sigtrap(struct task_struct *tsk, struct uml_pt_regs *regs,
 		  int error_code)
 {
 	struct siginfo info;
diff --git a/arch/um/kernel/smp.c b/arch/um/kernel/smp.c
index e1062ec36d40..be2d50c3aa95 100644
--- a/arch/um/kernel/smp.c
+++ b/arch/um/kernel/smp.c
@@ -214,8 +214,7 @@ void smp_call_function_slave(int cpu)
 	atomic_inc(&scf_finished);
 }
 
-int smp_call_function(void (*_func)(void *info), void *_info, int nonatomic,
-		      int wait)
+int smp_call_function(void (*_func)(void *info), void *_info, int wait)
 {
 	int cpus = num_online_cpus() - 1;
 	int i;
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index c3e2f369c33c..47f04f4a3464 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -13,14 +13,6 @@
 #include "kern_util.h"
 #include "os.h"
 
-/*
- * Scheduler clock - returns current time in nanosec units.
- */
-unsigned long long sched_clock(void)
-{
-	return (unsigned long long)jiffies_64 * (NSEC_PER_SEC / HZ);
-}
-
 void timer_handler(int sig, struct uml_pt_regs *regs)
 {
 	unsigned long flags;
diff --git a/arch/um/kernel/uaccess.c b/arch/um/kernel/uaccess.c
index f0f4b040d7c5..dd33f040c526 100644
--- a/arch/um/kernel/uaccess.c
+++ b/arch/um/kernel/uaccess.c
@@ -12,7 +12,7 @@
 #include <linux/string.h>
 #include "os.h"
 
-void __do_copy(void *to, const void *from, int n)
+static void __do_copy(void *to, const void *from, int n)
 {
 	memcpy(to, from, n);
 }
diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c
index eb8f2e4be192..63d299df152b 100644
--- a/arch/um/os-Linux/sigio.c
+++ b/arch/um/os-Linux/sigio.c
@@ -530,7 +530,7 @@ static void tty_close(int master, int slave)
 		printk(UM_KERN_CONT "No, enabling workaround\n");
 }
 
-void __init check_sigio(void)
+static void __init check_sigio(void)
 {
 	if ((access("/dev/ptmx", R_OK) < 0) &&
 	    (access("/dev/ptyp0", R_OK) < 0)) {
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 5aade6027e40..6ae180703a63 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -126,7 +126,7 @@ void set_sigstack(void *sig_stack, int size)
 		panic("enabling signal stack failed, errno = %d\n", errno);
 }
 
-void (*handlers[_NSIG])(int sig, struct sigcontext *sc);
+static void (*handlers[_NSIG])(int sig, struct sigcontext *sc);
 
 void handle_signal(int sig, struct sigcontext *sc)
 {
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 172ad8f72e12..d6e0a2234b86 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -96,7 +96,7 @@ bad_wait:
 
 extern unsigned long current_stub_stack(void);
 
-void get_skas_faultinfo(int pid, struct faultinfo * fi)
+static void get_skas_faultinfo(int pid, struct faultinfo *fi)
 {
 	int err;
 
diff --git a/arch/um/os-Linux/umid.c b/arch/um/os-Linux/umid.c
index 106fa8641553..a27defb81884 100644
--- a/arch/um/os-Linux/umid.c
+++ b/arch/um/os-Linux/umid.c
@@ -245,7 +245,7 @@ int __init set_umid(char *name)
 /* Changed in make_umid, which is called during early boot */
 static int umid_setup = 0;
 
-int __init make_umid(void)
+static int __init make_umid(void)
 {
 	int fd, err;
 	char tmp[256];
diff --git a/arch/um/sys-i386/bugs.c b/arch/um/sys-i386/bugs.c
index a74442d13762..2c6d0d731c12 100644
--- a/arch/um/sys-i386/bugs.c
+++ b/arch/um/sys-i386/bugs.c
@@ -12,7 +12,7 @@
 #include "sysdep/ptrace.h"
 
 /* Set during early boot */
-int host_has_cmov = 1;
+static int host_has_cmov = 1;
 static jmp_buf cmov_test_return;
 
 static void cmov_sigill_test_handler(int sig)
diff --git a/arch/um/sys-i386/checksum.S b/arch/um/sys-i386/checksum.S
index 62c7e564f22e..f058d2f82e18 100644
--- a/arch/um/sys-i386/checksum.S
+++ b/arch/um/sys-i386/checksum.S
@@ -243,13 +243,12 @@ unsigned int csum_partial_copy_generic (const char *src, char *dst,
 	.previous
 
 .align 4
-.globl csum_partial_copy_generic_i386
-				
+
 #ifndef CONFIG_X86_USE_PPRO_CHECKSUM
 
 #define ARGBASE 16		
 #define FP		12
-		
+
 csum_partial_copy_generic_i386:
 	subl  $4,%esp	
 	pushl %edi
diff --git a/arch/um/sys-i386/ldt.c b/arch/um/sys-i386/ldt.c
index a34263e6b08d..a4846a84a7be 100644
--- a/arch/um/sys-i386/ldt.c
+++ b/arch/um/sys-i386/ldt.c
@@ -14,8 +14,8 @@
 
 extern int modify_ldt(int func, void *ptr, unsigned long bytecount);
 
-long write_ldt_entry(struct mm_id * mm_idp, int func, struct user_desc * desc,
-		     void **addr, int done)
+static long write_ldt_entry(struct mm_id *mm_idp, int func,
+		     struct user_desc *desc, void **addr, int done)
 {
 	long res;
 
diff --git a/arch/v850/Kconfig b/arch/v850/Kconfig
deleted file mode 100644
index 4379f43505ef..000000000000
--- a/arch/v850/Kconfig
+++ /dev/null
@@ -1,353 +0,0 @@
-#############################################################################
-#
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.txt.
-#
-#############################################################################
-
-mainmenu "uClinux/v850 (w/o MMU) Kernel Configuration"
-
-config MMU
-       	bool
-	default n
-config ZONE_DMA
-	bool
-	default y
-config RWSEM_GENERIC_SPINLOCK
-	bool
-	default y
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default n
-config GENERIC_FIND_NEXT_BIT
-	bool
-	default y
-config GENERIC_HWEIGHT
-	bool
-	default y
-config GENERIC_CALIBRATE_DELAY
-	bool
-	default y
-
-config GENERIC_HARDIRQS
-	bool
-	default y
-
-config GENERIC_IRQ_PROBE
-	bool
-	default y
-
-config GENERIC_TIME
-	bool
-	default y
-
-config TIME_LOW_RES
-	bool
-	default y
-
-config ARCH_HAS_ILOG2_U32
-	bool
-	default n
-
-config ARCH_HAS_ILOG2_U64
-	bool
-	default n
-
-config ARCH_SUPPORTS_AOUT
-	def_bool y
-
-# Turn off some random 386 crap that can affect device config
-config ISA
-	bool
-	default n
-config ISAPNP
-	bool
-	default n
-config EISA
-	bool
-	default n
-config MCA
-	bool
-	default n
-
-
-#############################################################################
-#### v850-specific config
-
-# Define the architecture
-config V850
-	bool
-	default y
-	select HAVE_IDE
-
-menu "Processor type and features"
-
-   choice
-	  prompt "Platform"
-	  default GDB
-      config V850E_SIM
-      	     bool "GDB"
-      config RTE_CB_MA1
-      	     bool "RTE-V850E/MA1-CB"
-      config RTE_CB_NB85E
-      	     bool "RTE-V850E/NB85E-CB"
-      config RTE_CB_ME2
-      	     bool "RTE-V850E/ME2-CB"
-      config V850E_AS85EP1
-      	     bool "AS85EP1"
-      config V850E2_SIM85E2C
-      	     bool "sim85e2c"
-      config V850E2_SIM85E2S
-      	     bool "sim85e2s"
-      config V850E2_FPGA85E2C
-      	     bool "NA85E2C-FPGA"
-      config V850E2_ANNA
-      	     bool "Anna"
-   endchoice
-
-   #### V850E processor-specific config
-
-   # All CPUs currently supported use the v850e architecture
-   config V850E
-   	  bool
-	  default y
-
-   # The RTE-V850E/MA1-CB is the only type of V850E/MA1 platform we
-   # currently support
-   config V850E_MA1
-   	  bool
-	  depends on RTE_CB_MA1
-	  default y
-   # Similarly for the RTE-V850E/NB85E-CB - V850E/TEG
-   config V850E_TEG
-   	  bool
-	  depends on RTE_CB_NB85E
-	  default y
-   # ... and the RTE-V850E/ME2-CB - V850E/ME2
-   config V850E_ME2
-   	  bool
-	  depends on RTE_CB_ME2
-	  default y
-
-
-   #### sim85e2-specific config
-
-   config V850E2_SIM85E2
-   	  bool
-	  depends on V850E2_SIM85E2C || V850E2_SIM85E2S
-	  default y
-
-
-   #### V850E2 processor-specific config
-
-   # V850E2 processors
-   config V850E2
-   	  bool
-	  depends on V850E2_SIM85E2 || V850E2_FPGA85E2C || V850E2_ANNA
-	  default y
-
-
-   #### RTE-CB platform-specific config
-
-   # Boards in the RTE-x-CB series
-   config RTE_CB
-   	  bool
-	  depends on RTE_CB_MA1 || RTE_CB_NB85E || RTE_CB_ME2
-	  default y
-
-   config RTE_CB_MULTI
-   	  bool
-	  # RTE_CB_NB85E can either have multi ROM support or not, but
-	  # other platforms (currently only RTE_CB_MA1) require it.
-	  prompt "Multi monitor ROM support" if RTE_CB_NB85E
-	  depends on RTE_CB_MA1 || RTE_CB_NB85E
-	  default y
-
-   config RTE_CB_MULTI_DBTRAP
-   	  bool "Pass illegal insn trap / dbtrap to kernel"
-	  depends on RTE_CB_MULTI
-	  default n
-
-   config RTE_CB_MA1_KSRAM
-   	  bool "Kernel in SRAM (limits size of kernel)"
-	  depends on RTE_CB_MA1 && RTE_CB_MULTI
-	  default n
-
-   config RTE_MB_A_PCI
-   	  bool "Mother-A PCI support"
-	  depends on RTE_CB
-	  default y
-
-   # The GBUS is used to talk to the RTE-MOTHER-A board
-   config RTE_GBUS_INT
-   	  bool
-	  depends on RTE_MB_A_PCI
-	  default y
-
-   # The only PCI bus we support is on the RTE-MOTHER-A board
-   config PCI
-   	  bool
-	  default RTE_MB_A_PCI
-
-   #### Some feature-specific configs
-
-   # Everything except for the GDB simulator uses the same interrupt controller
-   config V850E_INTC
-   	  bool
-	  default !V850E_SIM
-
-   # Everything except for the various simulators uses the "Timer D" unit
-   config V850E_TIMER_D
-   	  bool
-	  default !V850E_SIM && !V850E2_SIM85E2
-
-   # Cache control used on some v850e1 processors
-   config V850E_CACHE
-          bool
-	  default V850E_TEG || V850E_ME2
-
-   # Cache control used on v850e2 processors; I think this should
-   # actually apply to more, but currently only the SIM85E2S uses it
-   config V850E2_CACHE
-   	  bool
-	  default V850E2_SIM85E2S
-
-   config NO_CACHE
-   	  bool
-	  default !V850E_CACHE && !V850E2_CACHE
-
-   # HZ depends on the platform
-   config HZ
-	  int
-	  default 24  if V850E_SIM || V850E2_SIM85E2
-	  default 122 if V850E2_FPGA85E2C
-	  default 100
-
-   #### Misc config
-
-   config ROM_KERNEL
-   	  bool "Kernel in ROM"
-	  depends on V850E2_ANNA || V850E_AS85EP1 || RTE_CB_ME2
-
-   # Some platforms pre-zero memory, in which case the kernel doesn't need to
-   config ZERO_BSS
-   	  bool
-	  depends on !V850E2_SIM85E2C
-	  default y
-
-   # The crappy-ass zone allocator requires that the start of allocatable
-   # memory be aligned to the largest possible allocation.
-   config FORCE_MAX_ZONEORDER
-   	  int
-	  default 8 if V850E2_SIM85E2C || V850E2_FPGA85E2C
-
-   config V850E_HIGHRES_TIMER
-   	  bool "High resolution timer support"
-	  depends on V850E_TIMER_D
-   config TIME_BOOTUP
-   	  bool "Time bootup"
-	  depends on V850E_HIGHRES_TIMER
-
-   config RESET_GUARD
-   	  bool "Reset Guard"
-
-source "mm/Kconfig"
-
-endmenu
-
-
-#############################################################################
-
-source init/Kconfig
-
-#############################################################################
-
-menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
-
-#    config PCI
-# 	   bool "PCI support"
-# 	   help
-# 	     Support for PCI bus.
-
-source "drivers/pci/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
-
-source "drivers/pci/hotplug/Kconfig"
-
-endmenu
-
-menu "Executable file formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
-source "net/Kconfig"
-
-#############################################################################
-
-source "drivers/base/Kconfig"
-
-source drivers/mtd/Kconfig
-
-source drivers/parport/Kconfig
-
-#source drivers/pnp/Kconfig
-
-source drivers/block/Kconfig
-
-#############################################################################
-
-menu "Disk device support"
-
-source "drivers/ide/Kconfig"
-
-source "drivers/scsi/Kconfig"
-
-endmenu
-
-#############################################################################
-
-
-source "drivers/md/Kconfig"
-
-source "drivers/message/fusion/Kconfig"
-
-source "drivers/ieee1394/Kconfig"
-
-source "drivers/message/i2o/Kconfig"
-
-source "drivers/net/Kconfig"
-
-source "drivers/isdn/Kconfig"
-
-#source "drivers/telephony/Kconfig"
-
-#
-# input before char - char/joystick depends on it. As does USB.
-#
-source "drivers/input/Kconfig"
-
-source "drivers/char/Kconfig"
-
-#source drivers/misc/Config.in
-source "drivers/media/Kconfig"
-
-source "fs/Kconfig"
-
-source "drivers/video/Kconfig"
-
-source "sound/Kconfig"
-
-source "drivers/usb/Kconfig"
-
-source "arch/v850/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-
-source "lib/Kconfig"
-
-#############################################################################
diff --git a/arch/v850/Kconfig.debug b/arch/v850/Kconfig.debug
deleted file mode 100644
index 4acfb9cca1ca..000000000000
--- a/arch/v850/Kconfig.debug
+++ /dev/null
@@ -1,10 +0,0 @@
-menu "Kernel hacking"
-
-source "lib/Kconfig.debug"
-
-config NO_KERNEL_MSG
-	bool "Suppress Kernel BUG Messages"
-	help
-	  Do not output any debug BUG messages within the kernel.
-
-endmenu
diff --git a/arch/v850/Makefile b/arch/v850/Makefile
deleted file mode 100644
index 8b629df0029a..000000000000
--- a/arch/v850/Makefile
+++ /dev/null
@@ -1,54 +0,0 @@
-#
-# arch/v850/Makefile
-#
-#  Copyright (C) 2001,02,03,05  NEC Corporation
-#  Copyright (C) 2001,02,03,05  Miles Bader <miles@gnu.org>
-#
-# This file is included by the global makefile so that you can add your own
-# architecture-specific flags and dependencies. Remember to do have actions
-# for "archclean" and "archdep" for cleaning up and making dependencies for
-# this architecture
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-arch_dir = arch/v850
-
-KBUILD_CFLAGS += -mv850e
-# r16 is a fixed pointer to the current task
-KBUILD_CFLAGS += -ffixed-r16 -mno-prolog-function
-KBUILD_CFLAGS += -fno-builtin
-KBUILD_CFLAGS += -D__linux__ -DUTS_SYSNAME=\"uClinux\"
-
-# By default, build a kernel that runs on the gdb v850 simulator.
-KBUILD_DEFCONFIG := sim_defconfig
-
-# This prevents the linker from consolidating the .gnu.linkonce.this_module
-# section into .text (which the v850 default linker script for -r does for
-# some reason)
-LDFLAGS_MODULE += --unique=.gnu.linkonce.this_module
-
-OBJCOPY_FLAGS_BLOB := -I binary -O elf32-little -B v850e
-
-
-head-y := $(arch_dir)/kernel/head.o $(arch_dir)/kernel/init_task.o
-core-y += $(arch_dir)/kernel/
-libs-y += $(arch_dir)/lib/
-
-
-# Deal with the initial contents of the root device
-ifdef ROOT_FS_IMAGE
-core-y += root_fs_image.o
-
-# Because the kernel build-system erases all explicit .o build rules, we
-# have to use an intermediate target to fool it into building for us.
-# This results in it being built anew each time, but that's alright.
-root_fs_image.o: root_fs_image_force
-
-root_fs_image_force: $(ROOT_FS_IMAGE)
-	$(OBJCOPY) $(OBJCOPY_FLAGS_BLOB) --rename-section .data=.root,alloc,load,readonly,data,contents $< root_fs_image.o
-endif
-
-CLEAN_FILES += root_fs_image.o
diff --git a/arch/v850/README b/arch/v850/README
deleted file mode 100644
index 12f7f7a665e0..000000000000
--- a/arch/v850/README
+++ /dev/null
@@ -1,44 +0,0 @@
-This port to the NEC V850E processor supports the following platforms:
-
-   "sim"
-	The gdb v850e simulator (CONFIG_V850E_SIM).
-
-   "rte-ma1-cb"
-	The Midas labs RTE-V850E/MA1-CB and RTE-V850E/NB85E-CB evaluation
-	boards (CONFIG_RTE_CB_MA1 and CONFIG_RTE_CB_NB85E).  This support
-	has only been tested when running with the Multi-debugger monitor
-	ROM (for the Green Hills Multi debugger).  The optional NEC
-	Solution Gear RTE-MOTHER-A motherboard is also supported, which
-	allows PCI boards to be used (CONFIG_RTE_MB_A_PCI).
-
-   "rte-me2-cb"
-	The Midas labs RTE-V850E/ME2-CB evaluation board (CONFIG_RTE_CB_ME2).
-     	This has only been tested using a kernel downloaded via an ICE
-     	connection using the Multi debugger.  Support for the RTE-MOTHER-A is
-     	present, but hasn't been tested (unlike the other Midas labs cpu
-     	boards, the RTE-V850E/ME2-CB includes an ethernet adaptor).
-
-   "as85ep1"
-	The NEC AS85EP1 V850E evaluation chip/board (CONFIG_V850E_AS85EP1).
-
-   "anna"
-	The NEC `Anna' (board/chip) implementation of the V850E2 processor
-	(CONFIG_V850E2_ANNA).
-
-   "sim85e2c", "sim85e2s"
-   	The sim85e2c and sim85e2s simulators, which are verilog simulations
-	of the V850E2 NA85E2C/NA85E2S cpu cores (CONFIG_V850E2_SIM85E2C and
-	CONFIG_V850E2_SIM85E2S).
-
-   "fpga85e2c"
-	A FPGA implementation of the V850E2 NA85E2C cpu core
-	(CONFIG_V850E2_FPGA85E2C).
-
-To get a default kernel configuration for a particular platform, you can
-use a <platform>_defconfig make target (e.g., "make rte-me2-cb_defconfig");
-to see which default configurations are possible, look in the directory
-"arch/v850/configs".
-
-Porting to anything with a V850E/MA1 or MA2 processor should be simple.
-See the file <asm-v850/machdep.h> and the files it includes for an example of
-how to add platform/chip-specific support.
diff --git a/arch/v850/configs/rte-ma1-cb_defconfig b/arch/v850/configs/rte-ma1-cb_defconfig
deleted file mode 100644
index 1a5beda36e29..000000000000
--- a/arch/v850/configs/rte-ma1-cb_defconfig
+++ /dev/null
@@ -1,617 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-uc0
-# Fri Sep  2 13:54:27 2005
-#
-# CONFIG_MMU is not set
-# CONFIG_UID16 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_ISA is not set
-# CONFIG_ISAPNP is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_V850=y
-
-#
-# Processor type and features
-#
-# CONFIG_V850E_SIM is not set
-CONFIG_RTE_CB_MA1=y
-# CONFIG_RTE_CB_NB85E is not set
-# CONFIG_RTE_CB_ME2 is not set
-# CONFIG_V850E_AS85EP1 is not set
-# CONFIG_V850E2_SIM85E2C is not set
-# CONFIG_V850E2_SIM85E2S is not set
-# CONFIG_V850E2_FPGA85E2C is not set
-# CONFIG_V850E2_ANNA is not set
-CONFIG_V850E=y
-CONFIG_V850E_MA1=y
-CONFIG_RTE_CB=y
-CONFIG_RTE_CB_MULTI=y
-CONFIG_RTE_CB_MULTI_DBTRAP=y
-# CONFIG_RTE_CB_MA1_KSRAM is not set
-CONFIG_RTE_MB_A_PCI=y
-CONFIG_RTE_GBUS_INT=y
-CONFIG_PCI=y
-CONFIG_V850E_INTC=y
-CONFIG_V850E_TIMER_D=y
-# CONFIG_V850E_CACHE is not set
-# CONFIG_V850E2_CACHE is not set
-CONFIG_NO_CACHE=y
-CONFIG_ZERO_BSS=y
-# CONFIG_V850E_HIGHRES_TIMER is not set
-# CONFIG_RESET_GUARD is not set
-CONFIG_LARGE_ALLOCS=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_AUDIT is not set
-# CONFIG_HOTPLUG is not set
-CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI_LEGACY_PROC is not set
-# CONFIG_PCI_NAMES is not set
-# CONFIG_PCI_DEBUG is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-CONFIG_MTD_SLRAM=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Disk device support
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_VENDOR_SMC is not set
-
-#
-# Tulip family network device support
-#
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_NE2000 is not set
-CONFIG_NET_PCI=y
-# CONFIG_PCNET32 is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
-# CONFIG_FEALNX is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_8139TOO is not set
-# CONFIG_SIS900 is not set
-# CONFIG_EPIC100 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_TLAN is not set
-# CONFIG_VIA_RHINE is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_R8169 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_V850E_UART=y
-CONFIG_V850E_UART_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_MAGIC_ROM_PTR is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_NO_KERNEL_MSG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/v850/configs/rte-me2-cb_defconfig b/arch/v850/configs/rte-me2-cb_defconfig
deleted file mode 100644
index 15e666478061..000000000000
--- a/arch/v850/configs/rte-me2-cb_defconfig
+++ /dev/null
@@ -1,462 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-uc0
-# Fri Sep  2 13:47:50 2005
-#
-# CONFIG_MMU is not set
-# CONFIG_UID16 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_ISA is not set
-# CONFIG_ISAPNP is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_V850=y
-
-#
-# Processor type and features
-#
-# CONFIG_V850E_SIM is not set
-# CONFIG_RTE_CB_MA1 is not set
-# CONFIG_RTE_CB_NB85E is not set
-CONFIG_RTE_CB_ME2=y
-# CONFIG_V850E_AS85EP1 is not set
-# CONFIG_V850E2_SIM85E2C is not set
-# CONFIG_V850E2_SIM85E2S is not set
-# CONFIG_V850E2_FPGA85E2C is not set
-# CONFIG_V850E2_ANNA is not set
-CONFIG_V850E=y
-CONFIG_V850E_ME2=y
-CONFIG_RTE_CB=y
-# CONFIG_RTE_MB_A_PCI is not set
-# CONFIG_PCI is not set
-CONFIG_V850E_INTC=y
-CONFIG_V850E_TIMER_D=y
-CONFIG_V850E_CACHE=y
-# CONFIG_V850E2_CACHE is not set
-# CONFIG_NO_CACHE is not set
-# CONFIG_ROM_KERNEL is not set
-CONFIG_ZERO_BSS=y
-# CONFIG_V850E_HIGHRES_TIMER is not set
-# CONFIG_RESET_GUARD is not set
-CONFIG_LARGE_ALLOCS=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_SLRAM=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-
-#
-# Disk device support
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-# CONFIG_SERIAL_8250_EXTENDED is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_V850E_UART is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_MAGIC_ROM_PTR is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_NO_KERNEL_MSG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/v850/configs/sim_defconfig b/arch/v850/configs/sim_defconfig
deleted file mode 100644
index f31ba7398ad0..000000000000
--- a/arch/v850/configs/sim_defconfig
+++ /dev/null
@@ -1,451 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.13-uc0
-# Fri Sep  2 13:36:43 2005
-#
-# CONFIG_MMU is not set
-# CONFIG_UID16 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_ISA is not set
-# CONFIG_ISAPNP is not set
-# CONFIG_EISA is not set
-# CONFIG_MCA is not set
-CONFIG_V850=y
-
-#
-# Processor type and features
-#
-CONFIG_V850E_SIM=y
-# CONFIG_RTE_CB_MA1 is not set
-# CONFIG_RTE_CB_NB85E is not set
-# CONFIG_RTE_CB_ME2 is not set
-# CONFIG_V850E_AS85EP1 is not set
-# CONFIG_V850E2_SIM85E2C is not set
-# CONFIG_V850E2_SIM85E2S is not set
-# CONFIG_V850E2_FPGA85E2C is not set
-# CONFIG_V850E2_ANNA is not set
-CONFIG_V850E=y
-# CONFIG_PCI is not set
-# CONFIG_V850E_INTC is not set
-# CONFIG_V850E_TIMER_D is not set
-# CONFIG_V850E_CACHE is not set
-# CONFIG_V850E2_CACHE is not set
-CONFIG_NO_CACHE=y
-CONFIG_ZERO_BSS=y
-# CONFIG_RESET_GUARD is not set
-CONFIG_LARGE_ALLOCS=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-
-#
-# Code maturity level options
-#
-# CONFIG_EXPERIMENTAL is not set
-CONFIG_CLEAN_COMPILE=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_SYSCTL is not set
-# CONFIG_HOTPLUG is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
-# CONFIG_EPOLL is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-CONFIG_BASE_SMALL=1
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_OBSOLETE_MODPARM=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_FLAT=y
-# CONFIG_BINFMT_ZFLAT is not set
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_PARTITIONS is not set
-
-#
-# User Modules And Translation Layers
-#
-# CONFIG_MTD_CHAR is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-CONFIG_MTD_SLRAM=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-# CONFIG_MTD_NAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_RAM is not set
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-
-#
-# Disk device support
-#
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_UNIX98_PTYS is not set
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-
-#
-# XFS support
-#
-# CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_MAGIC_ROM_PTR is not set
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-# CONFIG_NLS is not set
-
-#
-# Graphics support
-#
-# CONFIG_FB is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# USB support
-#
-# CONFIG_USB_ARCH_HAS_HCD is not set
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
-# CONFIG_NO_KERNEL_MSG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-# CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC32 is not set
-# CONFIG_LIBCRC32C is not set
diff --git a/arch/v850/kernel/Makefile b/arch/v850/kernel/Makefile
deleted file mode 100644
index da5889c53576..000000000000
--- a/arch/v850/kernel/Makefile
+++ /dev/null
@@ -1,40 +0,0 @@
-#
-# arch/v850/kernel/Makefile
-#
-#  Copyright (C) 2001,02,03  NEC Electronics Corporation
-#  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-
-extra-y := head.o init_task.o vmlinux.lds
-
-obj-y += intv.o entry.o process.o syscalls.o time.o setup.o \
-	 signal.o irq.o mach.o ptrace.o bug.o
-obj-$(CONFIG_MODULES)		+= module.o v850_ksyms.o
-# chip-specific code
-obj-$(CONFIG_V850E_MA1)		+= ma.o
-obj-$(CONFIG_V850E_ME2)		+= me2.o
-obj-$(CONFIG_V850E_TEG)		+= teg.o
-obj-$(CONFIG_V850E_AS85EP1)	+= as85ep1.o
-obj-$(CONFIG_V850E2_ANNA)	+= anna.o
-# platform-specific code
-obj-$(CONFIG_V850E_SIM)		+= sim.o simcons.o
-obj-$(CONFIG_V850E2_SIM85E2)	+= sim85e2.o memcons.o
-obj-$(CONFIG_V850E2_FPGA85E2C)	+= fpga85e2c.o memcons.o
-obj-$(CONFIG_RTE_CB)		+= rte_cb.o rte_cb_leds.o
-obj-$(CONFIG_RTE_CB_MA1)	+= rte_ma1_cb.o
-obj-$(CONFIG_RTE_CB_ME2)	+= rte_me2_cb.o
-obj-$(CONFIG_RTE_CB_NB85E)	+= rte_nb85e_cb.o
-obj-$(CONFIG_RTE_CB_MULTI)	+= rte_cb_multi.o
-obj-$(CONFIG_RTE_MB_A_PCI)	+= rte_mb_a_pci.o
-obj-$(CONFIG_RTE_GBUS_INT)	+= gbus_int.o
-# feature-specific code
-obj-$(CONFIG_V850E_INTC)	+= v850e_intc.o
-obj-$(CONFIG_V850E_TIMER_D)	+= v850e_timer_d.o v850e_utils.o
-obj-$(CONFIG_V850E_CACHE)	+= v850e_cache.o
-obj-$(CONFIG_V850E2_CACHE)	+= v850e2_cache.o
-obj-$(CONFIG_V850E_HIGHRES_TIMER) += highres_timer.o
-obj-$(CONFIG_PROC_FS)		+= procfs.o
diff --git a/arch/v850/kernel/anna-rom.ld b/arch/v850/kernel/anna-rom.ld
deleted file mode 100644
index 7c54e7e3f1b1..000000000000
--- a/arch/v850/kernel/anna-rom.ld
+++ /dev/null
@@ -1,16 +0,0 @@
-/* Linker script for the Midas labs Anna V850E2 evaluation board
-   (CONFIG_V850E2_ANNA), with kernel in ROM (CONFIG_ROM_KERNEL).  */
-
-MEMORY {
-	/* 8MB of flash ROM.  */
-	ROM   : ORIGIN = 0,          LENGTH = 0x00800000
-
-	/* 1MB of static RAM.  This memory is mirrored 64 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 64MB of DRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	ROMK_SECTIONS(ROM, SRAM)
-}
diff --git a/arch/v850/kernel/anna.c b/arch/v850/kernel/anna.c
deleted file mode 100644
index 5978a25170fb..000000000000
--- a/arch/v850/kernel/anna.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * arch/v850/kernel/anna.c -- Anna V850E2 evaluation chip/board
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/major.h>
-#include <linux/irq.h>
-
-#include <asm/machdep.h>
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are vaguely contiguous (with a big hole in between; see
-   mach_reserve_bootmem for details); use both as one big area.  */
-#define RAM_START 	SRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-/* The bits of this port are connected to an 8-LED bar-graph.  */
-#define LEDS_PORT	0
-
-
-static void anna_led_tick (void);
-
-
-void __init mach_early_init (void)
-{
-	ANNA_ILBEN    = 0;
-
-	V850E2_CSC(0) = 0x402F;
-	V850E2_CSC(1) = 0x4000;
-	V850E2_BPC    = 0;
-	V850E2_BSC    = 0xAAAA;
-	V850E2_BEC    = 0;
-
-#if 0
-	V850E2_BHC    = 0xFFFF;	/* icache all memory, dcache all */
-#else
-	V850E2_BHC    = 0;	/* cache no memory */
-#endif
-	V850E2_BCT(0) = 0xB088;
-	V850E2_BCT(1) = 0x0008;
-	V850E2_DWC(0) = 0x0027;
-	V850E2_DWC(1) = 0;
-	V850E2_BCC    = 0x0006;
-	V850E2_ASC    = 0;
-	V850E2_LBS    = 0x0089;
-	V850E2_SCR(3) = 0x21A9;
-	V850E2_RFS(3) = 0x8121;
-
-	v850e_intc_disable_irqs ();
-}
-
-void __init mach_setup (char **cmdline)
-{
-	ANNA_PORT_PM (LEDS_PORT) = 0;	/* Make all LED pins output pins.  */
-	mach_tick = anna_led_tick;
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_reserve_bootmem ()
-{
-	/* The space between SRAM and SDRAM is filled with duplicate
-	   images of SRAM.  Prevent the kernel from using them.  */
-	reserve_bootmem (SRAM_ADDR + SRAM_SIZE,
-			 SDRAM_ADDR - (SRAM_ADDR + SRAM_SIZE),
-			 BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "PIN", IRQ_INTP(0),   IRQ_INTP_NUM,   1, 4 },
-	{ "CCC", IRQ_INTCCC(0),	IRQ_INTCCC_NUM, 1, 5 },
-	{ "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM,	1, 5 },
-	{ "DMA", IRQ_INTDMA(0), IRQ_INTDMA_NUM,	1, 2 },
-	{ "DMXER", IRQ_INTDMXER,1,		1, 2 },
-	{ "SRE", IRQ_INTSRE(0), IRQ_INTSRE_NUM,	3, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM, 	3, 4 },
-	{ "ST",  IRQ_INTST(0), 	IRQ_INTST_NUM, 	3, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	asm ("jmp r0"); /* Jump to the reset vector.  */
-}
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	local_irq_disable ();	/* Ignore all interrupts.  */
-	ANNA_PORT_IO(LEDS_PORT) = 0xAA;	/* Note that we halted.  */
-	for (;;)
-		asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-/* Called before configuring an on-chip UART.  */
-void anna_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* The Anna connects some general-purpose I/O pins on the CPU to
-	   the RTS/CTS lines of UART 1's serial connection.  I/O pins P07
-	   and P37 are RTS and CTS respectively.  */
-	if (chan == 1) {
-		ANNA_PORT_PM(0) &= ~0x80; /* P07 in output mode */
-		ANNA_PORT_PM(3) |=  0x80; /* P37 in input mode */
-	}
-}
-
-/* Minimum and maximum bounds for the moving upper LED boundary in the
-   clock tick display.  We can't use the last bit because it's used for
-   UART0's CTS output.  */
-#define MIN_MAX_POS 0
-#define MAX_MAX_POS 6
-
-/* There are MAX_MAX_POS^2 - MIN_MAX_POS^2 cycles in the animation, so if
-   we pick 6 and 0 as above, we get 49 cycles, which is when divided into
-   the standard 100 value for HZ, gives us an almost 1s total time.  */
-#define TICKS_PER_FRAME \
-	(HZ / (MAX_MAX_POS * MAX_MAX_POS - MIN_MAX_POS * MIN_MAX_POS))
-
-static void anna_led_tick ()
-{
-	static unsigned counter = 0;
-	
-	if (++counter == TICKS_PER_FRAME) {
-		static int pos = 0, max_pos = MAX_MAX_POS, dir = 1;
-
-		if (dir > 0 && pos == max_pos) {
-			dir = -1;
-			if (max_pos == MIN_MAX_POS)
-				max_pos = MAX_MAX_POS;
-			else
-				max_pos--;
-		} else {
-			if (dir < 0 && pos == 0)
-				dir = 1;
-
-			if (pos + dir <= max_pos) {
-				/* Each bit of port 0 has a LED. */
-				clear_bit (pos, &ANNA_PORT_IO(LEDS_PORT));
-				pos += dir;
-				set_bit (pos, &ANNA_PORT_IO(LEDS_PORT));
-			}
-		}
-
-		counter = 0;
-	}
-}
diff --git a/arch/v850/kernel/anna.ld b/arch/v850/kernel/anna.ld
deleted file mode 100644
index df7f80f2833d..000000000000
--- a/arch/v850/kernel/anna.ld
+++ /dev/null
@@ -1,20 +0,0 @@
-/* Linker script for the Midas labs Anna V850E2 evaluation board
-   (CONFIG_V850E2_ANNA).  */
-
-MEMORY {
-	/* 256KB of internal memory (followed by one mirror).  */
-	iMEM0 : ORIGIN = 0,	     LENGTH = 0x00040000
-	/* 256KB of internal memory (followed by one mirror).  */
-	iMEM1 : ORIGIN = 0x00040000, LENGTH = 0x00040000
-
-	/* 1MB of static RAM.  This memory is mirrored 64 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 64MB of DRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	.intv : { INTV_CONTENTS } > iMEM0
-	.sram : { RAMK_KRAM_CONTENTS } > SRAM
-	.root : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/as85ep1-rom.ld b/arch/v850/kernel/as85ep1-rom.ld
deleted file mode 100644
index fe2a9a3ab525..000000000000
--- a/arch/v850/kernel/as85ep1-rom.ld
+++ /dev/null
@@ -1,21 +0,0 @@
-/* Linker script for the NEC AS85EP1 V850E evaluation board
-   (CONFIG_V850E_AS85EP1), with kernel in ROM (CONFIG_ROM_KERNEL).  */
-
-MEMORY {
-	/* 4MB of flash ROM.  */
-	ROM   : ORIGIN = 0,          LENGTH = 0x00400000
-
-	/* 1MB of static RAM.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-
-	/* About 58MB of DRAM.  This can actually be at one of two
-	   positions, determined by jumper JP3; we have to use the first
-	   position because the second is partially out of processor
-	   instruction addressing range (though in the second position
-	   there's actually 64MB available).  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	ROMK_SECTIONS(ROM, SRAM)
-}
diff --git a/arch/v850/kernel/as85ep1.c b/arch/v850/kernel/as85ep1.c
deleted file mode 100644
index b525ecf3aea4..000000000000
--- a/arch/v850/kernel/as85ep1.c
+++ /dev/null
@@ -1,234 +0,0 @@
-/*
- * arch/v850/kernel/as85ep1.c -- AS85EP1 V850E evaluation chip/board
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/major.h>
-#include <linux/irq.h>
-
-#include <asm/machdep.h>
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are vaguely contiguous (with a big hole in between; see
-   mach_reserve_bootmem for details); use both as one big area.  */
-#define RAM_START 	SRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-/* The bits of this port are connected to an 8-LED bar-graph.  */
-#define LEDS_PORT	4
-
-
-static void as85ep1_led_tick (void);
-
-extern char _intv_copy_src_start, _intv_copy_src_end;
-extern char _intv_copy_dst_start;
-
-
-void __init mach_early_init (void)
-{
-#ifndef CONFIG_ROM_KERNEL
-	const u32 *src;
-	register u32 *dst asm ("ep");
-#endif
-
-	AS85EP1_CSC(0) = 0x0403;
-	AS85EP1_BCT(0) = 0xB8B8;
-	AS85EP1_DWC(0) = 0x0104;
-	AS85EP1_BCC    = 0x0012;
-	AS85EP1_ASC    = 0;
-	AS85EP1_LBS    = 0x00A9;
-
-	AS85EP1_PORT_PMC(6)  = 0xFF; /* valid A0,A1,A20-A25 */
-	AS85EP1_PORT_PMC(7)  = 0x0E; /* valid CS1-CS3       */
-	AS85EP1_PORT_PMC(9)  = 0xFF; /* valid D16-D23       */
-	AS85EP1_PORT_PMC(10) = 0xFF; /* valid D24-D31       */
-
-	AS85EP1_RFS(1) = 0x800c;
-	AS85EP1_RFS(3) = 0x800c;
-	AS85EP1_SCR(1) = 0x20A9;
-	AS85EP1_SCR(3) = 0x20A9;
-
-#ifndef CONFIG_ROM_KERNEL
-	/* The early chip we have is buggy, and writing the interrupt
-	   vectors into low RAM may screw up, so for non-ROM kernels, we
-	   only rely on the reset vector being downloaded, and copy the
-	   rest of the interrupt vectors into place here.  The specific bug
-	   is that writing address N, where (N & 0x10) == 0x10, will _also_
-	   write to address (N - 0x10).  We avoid this (effectively) by
-	   writing in 16-byte chunks backwards from the end.  */
-
-	AS85EP1_IRAMM = 0x3;	/* "write-mode" for the internal instruction memory */
-
-	src = (u32 *)(((u32)&_intv_copy_src_end - 1) & ~0xF);
-	dst = (u32 *)&_intv_copy_dst_start
-		+ (src - (u32 *)&_intv_copy_src_start);
-	do {
-		u32 t0 = src[0], t1 = src[1], t2 = src[2], t3 = src[3];
-		dst[0] = t0; dst[1] = t1; dst[2] = t2; dst[3] = t3;
-		dst -= 4;
-		src -= 4;
-	} while (src > (u32 *)&_intv_copy_src_start);
-
-	AS85EP1_IRAMM = 0x0;	/* "read-mode" for the internal instruction memory */
-#endif /* !CONFIG_ROM_KERNEL */
-
-	v850e_intc_disable_irqs ();
-}
-
-void __init mach_setup (char **cmdline)
-{
-	AS85EP1_PORT_PMC (LEDS_PORT) = 0; /* Make the LEDs port an I/O port. */
-	AS85EP1_PORT_PM (LEDS_PORT) = 0; /* Make all the bits output pins.  */
-	mach_tick = as85ep1_led_tick;
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-/* Convenience macros.  */
-#define SRAM_END	(SRAM_ADDR + SRAM_SIZE)
-#define SDRAM_END	(SDRAM_ADDR + SDRAM_SIZE)
-
-void __init mach_reserve_bootmem ()
-{
-	if (SDRAM_ADDR < RAM_END && SDRAM_ADDR > RAM_START)
-		/* We can't use the space between SRAM and SDRAM, so
-		   prevent the kernel from trying.  */
-		reserve_bootmem(SRAM_END, SDRAM_ADDR - SRAM_END,
-				BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "CCC", IRQ_INTCCC(0),	IRQ_INTCCC_NUM, 1, 5 },
-	{ "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM,	1, 5 },
-	{ "SRE", IRQ_INTSRE(0), IRQ_INTSRE_NUM,	3, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM, 	3, 4 },
-	{ "ST",  IRQ_INTST(0), 	IRQ_INTST_NUM, 	3, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	asm ("jmp r0"); /* Jump to the reset vector.  */
-}
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	local_irq_disable ();	/* Ignore all interrupts.  */
-	AS85EP1_PORT_IO (LEDS_PORT) = 0xAA;	/* Note that we halted.  */
-	for (;;)
-		asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-/* Called before configuring an on-chip UART.  */
-void as85ep1_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* Make the shared uart/port pins be uart pins.  */
-	AS85EP1_PORT_PMC(3) |= (0x5 << chan);
-
-	/* The AS85EP1 connects some general-purpose I/O pins on the CPU to
-	   the RTS/CTS lines of UART 1's serial connection.  I/O pins P53
-	   and P54 are RTS and CTS respectively.  */
-	if (chan == 1) {
-		/* Put P53 & P54 in I/O port mode.  */
-		AS85EP1_PORT_PMC(5) &= ~0x18;
-		/* Make P53 an output, and P54 an input.  */
-		AS85EP1_PORT_PM(5) |=  0x10;
-	}
-}
-
-/* Minimum and maximum bounds for the moving upper LED boundary in the
-   clock tick display.  */
-#define MIN_MAX_POS 0
-#define MAX_MAX_POS 7
-
-/* There are MAX_MAX_POS^2 - MIN_MAX_POS^2 cycles in the animation, so if
-   we pick 6 and 0 as above, we get 49 cycles, which is when divided into
-   the standard 100 value for HZ, gives us an almost 1s total time.  */
-#define TICKS_PER_FRAME \
-	(HZ / (MAX_MAX_POS * MAX_MAX_POS - MIN_MAX_POS * MIN_MAX_POS))
-
-static void as85ep1_led_tick ()
-{
-	static unsigned counter = 0;
-	
-	if (++counter == TICKS_PER_FRAME) {
-		static int pos = 0, max_pos = MAX_MAX_POS, dir = 1;
-
-		if (dir > 0 && pos == max_pos) {
-			dir = -1;
-			if (max_pos == MIN_MAX_POS)
-				max_pos = MAX_MAX_POS;
-			else
-				max_pos--;
-		} else {
-			if (dir < 0 && pos == 0)
-				dir = 1;
-
-			if (pos + dir <= max_pos) {
-				/* Each bit of port 0 has a LED. */
-				set_bit (pos, &AS85EP1_PORT_IO(LEDS_PORT));
-				pos += dir;
-				clear_bit (pos, &AS85EP1_PORT_IO(LEDS_PORT));
-			}
-		}
-
-		counter = 0;
-	}
-}
diff --git a/arch/v850/kernel/as85ep1.ld b/arch/v850/kernel/as85ep1.ld
deleted file mode 100644
index ef2c4399063e..000000000000
--- a/arch/v850/kernel/as85ep1.ld
+++ /dev/null
@@ -1,49 +0,0 @@
-/* Linker script for the NEC AS85EP1 V850E evaluation board
-   (CONFIG_V850E_AS85EP1).  */
-
-MEMORY {
-	/* 1MB of internal instruction memory. */
-	iMEM0 : ORIGIN = 0,	     LENGTH = 0x00100000
-
-	/* 1MB of static RAM.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-
-	/* About 58MB of DRAM.  This can actually be at one of two
-	   positions, determined by jump JP3; we have to use the first
-	   position because the second is partially out of processor
-	   instruction addressing range (though in the second position
-	   there's actually 64MB available).  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	.resetv : {
-		__intv_start = . ;
-			*(.intv.reset)	/* Reset vector */
-	} > iMEM0
-
-	.sram : {
-		RAMK_KRAM_CONTENTS
-
-		/* We stick most of the interrupt vectors here; they'll be
-		   copied into the proper location by the early init code (we
-		   can't put them directly in the right place because of
-		   hardware bugs).  The vectors shouldn't need to be
-		   relocated, so we don't have to use `> ...  AT> ...' to
-		   split the load/vm addresses (and we can't because of
-		   problems with the loader).  */
-		. = ALIGN (0x10) ;
-		__intv_copy_src_start = . ;
-			*(.intv.common)	/* Vectors common to all v850e proc. */
-			*(.intv.mach)	/* Machine-specific int. vectors.  */
-		. = ALIGN (0x10) ;
-		__intv_copy_src_end = . ;
-	} > SRAM
-
-	/* Where we end up putting the vectors.  */
-	__intv_copy_dst_start = 0x10 ;
-	__intv_copy_dst_end = __intv_copy_dst_start + (__intv_copy_src_end - __intv_copy_src_start) ;
-	__intv_end = __intv_copy_dst_end ;
-
-	.root : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/asm-offsets.c b/arch/v850/kernel/asm-offsets.c
deleted file mode 100644
index 581e6986a776..000000000000
--- a/arch/v850/kernel/asm-offsets.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * This program is used to generate definitions needed by
- * assembly language modules.
- *
- * We use the technique used in the OSF Mach kernel code:
- * generate asm statements containing #defines,
- * compile this file to assembler, and then extract the
- * #defines from the assembly-language output.
- */
-
-#include <linux/stddef.h>
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/ptrace.h>
-#include <linux/hardirq.h>
-#include <linux/kbuild.h>
-
-#include <asm/irq.h>
-#include <asm/errno.h>
-
-int main (void)
-{
-	/* offsets into the task struct */
-	DEFINE (TASK_STATE, offsetof (struct task_struct, state));
-	DEFINE (TASK_FLAGS, offsetof (struct task_struct, flags));
-	DEFINE (TASK_PTRACE, offsetof (struct task_struct, ptrace));
-	DEFINE (TASK_BLOCKED, offsetof (struct task_struct, blocked));
-	DEFINE (TASK_THREAD, offsetof (struct task_struct, thread));
-	DEFINE (TASK_THREAD_INFO, offsetof (struct task_struct, stack));
-	DEFINE (TASK_MM, offsetof (struct task_struct, mm));
-	DEFINE (TASK_ACTIVE_MM, offsetof (struct task_struct, active_mm));
-	DEFINE (TASK_PID, offsetof (struct task_struct, pid));
-
-	/* offsets into the kernel_stat struct */
-	DEFINE (STAT_IRQ, offsetof (struct kernel_stat, irqs));
-
-
-	/* signal defines */
-	DEFINE (SIGSEGV, SIGSEGV);
-	DEFINE (SEGV_MAPERR, SEGV_MAPERR);
-	DEFINE (SIGTRAP, SIGTRAP);
-	DEFINE (SIGCHLD, SIGCHLD);
-	DEFINE (SIGILL, SIGILL);
-	DEFINE (TRAP_TRACE, TRAP_TRACE);
-
-	/* ptrace flag bits */
-	DEFINE (PT_PTRACED, PT_PTRACED);
-	DEFINE (PT_DTRACE, PT_DTRACE);
-
-	/* error values */
-	DEFINE (ENOSYS, ENOSYS);
-
-	/* clone flag bits */
-	DEFINE (CLONE_VFORK, CLONE_VFORK);
-	DEFINE (CLONE_VM, CLONE_VM);
-
-	return 0;
-}
diff --git a/arch/v850/kernel/bug.c b/arch/v850/kernel/bug.c
deleted file mode 100644
index c78cf750915a..000000000000
--- a/arch/v850/kernel/bug.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * arch/v850/kernel/bug.c -- Bug reporting functions
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/reboot.h>
-#include <linux/sched.h>
-#include <linux/module.h>
-
-#include <asm/errno.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/current.h>
-
-/* We should use __builtin_return_address, but it doesn't work in gcc-2.90
-   (which is currently our standard compiler on the v850).  */
-#define ret_addr() ({ register u32 lp asm ("lp"); lp; })
-#define stack_addr() ({ register u32 sp asm ("sp"); sp; })
-
-void __bug ()
-{
-	printk (KERN_CRIT "kernel BUG at PC 0x%x (SP ~0x%x)!\n",
-		ret_addr() - 4, /* - 4 for `jarl' */
-		stack_addr());
-	machine_halt ();
-}
-
-int bad_trap (int trap_num, struct pt_regs *regs)
-{
-	printk (KERN_CRIT
-		"unimplemented trap %d called at 0x%08lx, pid %d!\n",
-		trap_num, regs->pc, current->pid);
-	return -ENOSYS;
-}
-
-#ifdef CONFIG_RESET_GUARD
-void unexpected_reset (unsigned long ret_addr, unsigned long kmode,
-		       struct task_struct *task, unsigned long sp)
-{
-	printk (KERN_CRIT
-		"unexpected reset in %s mode, pid %d"
-		" (ret_addr = 0x%lx, sp = 0x%lx)\n",
-		kmode ? "kernel" : "user",
-		task ? task->pid : -1,
-		ret_addr, sp);
-
-	machine_halt ();
-}
-#endif /* CONFIG_RESET_GUARD */
-
-
-
-struct spec_reg_name {
-	const char *name;
-	int gpr;
-};
-
-struct spec_reg_name spec_reg_names[] = {
-	{ "sp", GPR_SP },
-	{ "gp", GPR_GP },
-	{ "tp", GPR_TP },
-	{ "ep", GPR_EP },
-	{ "lp", GPR_LP },
-	{ 0, 0 }
-};
-
-void show_regs (struct pt_regs *regs)
-{
-	int gpr_base, gpr_offs;
-
-	printk ("     pc 0x%08lx    psw 0x%08lx                       kernel_mode %d\n",
-		regs->pc, regs->psw, regs->kernel_mode);
-	printk ("   ctpc 0x%08lx  ctpsw 0x%08lx   ctbp 0x%08lx\n",
-		regs->ctpc, regs->ctpsw, regs->ctbp);
-
-	for (gpr_base = 0; gpr_base < NUM_GPRS; gpr_base += 4) {
-		for (gpr_offs = 0; gpr_offs < 4; gpr_offs++) {
-			int gpr = gpr_base + gpr_offs;
-			long val = regs->gpr[gpr];
-			struct spec_reg_name *srn;
-
-			for (srn = spec_reg_names; srn->name; srn++)
-				if (srn->gpr == gpr)
-					break;
-
-			if (srn->name)
-				printk ("%7s 0x%08lx", srn->name, val);
-			else
-				printk ("    r%02d 0x%08lx", gpr, val);
-		}
-
-		printk ("\n");
-	}
-}
-
-/*
- * TASK is a pointer to the task whose backtrace we want to see (or NULL
- * for current task), SP is the stack pointer of the first frame that
- * should be shown in the back trace (or NULL if the entire call-chain of
- * the task should be shown).
- */
-void show_stack (struct task_struct *task, unsigned long *sp)
-{
-	unsigned long addr, end;
-
-	if (sp)
-		addr = (unsigned long)sp;
-	else if (task)
-		addr = task_sp (task);
-	else
-		addr = stack_addr ();
-
-	addr = addr & ~3;
-	end = (addr + THREAD_SIZE - 1) & THREAD_MASK;
-
-	while (addr < end) {
-		printk ("%8lX: ", addr);
-		while (addr < end) {
-			printk (" %8lX", *(unsigned long *)addr);
-			addr += sizeof (unsigned long);
-			if (! (addr & 0xF))
-				break;
-		}
-		printk ("\n");
-	}
-}
-
-void dump_stack ()
-{
-	show_stack (0, 0);
-}
-
-EXPORT_SYMBOL(dump_stack);
diff --git a/arch/v850/kernel/entry.S b/arch/v850/kernel/entry.S
deleted file mode 100644
index e4327a8d6bcd..000000000000
--- a/arch/v850/kernel/entry.S
+++ /dev/null
@@ -1,1121 +0,0 @@
-/*
- * arch/v850/kernel/entry.S -- Low-level system-call handling, trap handlers,
- *	and context-switching
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/sys.h>
-
-#include <asm/entry.h>
-#include <asm/current.h>
-#include <asm/thread_info.h>
-#include <asm/clinkage.h>
-#include <asm/processor.h>
-#include <asm/irq.h>
-#include <asm/errno.h>
-
-#include <asm/asm-offsets.h>
-
-
-/* Make a slightly more convenient alias for C_SYMBOL_NAME.  */
-#define CSYM	C_SYMBOL_NAME
-
-
-/* The offset of the struct pt_regs in a state-save-frame on the stack.  */
-#define PTO	STATE_SAVE_PT_OFFSET
-
-
-/* Save argument registers to the state-save-frame pointed to by EP.  */
-#define SAVE_ARG_REGS							      \
-	sst.w	r6, PTO+PT_GPR(6)[ep];					      \
-	sst.w	r7, PTO+PT_GPR(7)[ep];					      \
-	sst.w	r8, PTO+PT_GPR(8)[ep];					      \
-	sst.w	r9, PTO+PT_GPR(9)[ep]
-/* Restore argument registers from the state-save-frame pointed to by EP.  */
-#define RESTORE_ARG_REGS						      \
-	sld.w	PTO+PT_GPR(6)[ep], r6;					      \
-	sld.w	PTO+PT_GPR(7)[ep], r7;					      \
-	sld.w	PTO+PT_GPR(8)[ep], r8;					      \
-	sld.w	PTO+PT_GPR(9)[ep], r9
-
-/* Save value return registers to the state-save-frame pointed to by EP.  */
-#define SAVE_RVAL_REGS							      \
-	sst.w	r10, PTO+PT_GPR(10)[ep];				      \
-	sst.w	r11, PTO+PT_GPR(11)[ep]
-/* Restore value return registers from the state-save-frame pointed to by EP.  */
-#define RESTORE_RVAL_REGS						      \
-	sld.w	PTO+PT_GPR(10)[ep], r10;				      \
-	sld.w	PTO+PT_GPR(11)[ep], r11
-
-
-#define SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS				      \
-	sst.w	r1, PTO+PT_GPR(1)[ep];					      \
-	sst.w	r5, PTO+PT_GPR(5)[ep]
-#define SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL				      \
-	sst.w	r12, PTO+PT_GPR(12)[ep];				      \
-	sst.w	r13, PTO+PT_GPR(13)[ep];				      \
-	sst.w	r14, PTO+PT_GPR(14)[ep];				      \
-	sst.w	r15, PTO+PT_GPR(15)[ep];				      \
-	sst.w	r16, PTO+PT_GPR(16)[ep];				      \
-	sst.w	r17, PTO+PT_GPR(17)[ep];				      \
-	sst.w	r18, PTO+PT_GPR(18)[ep];				      \
-	sst.w	r19, PTO+PT_GPR(19)[ep]
-#define RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS				      \
-	sld.w	PTO+PT_GPR(1)[ep], r1;					      \
-	sld.w	PTO+PT_GPR(5)[ep], r5
-#define RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL				      \
-	sld.w	PTO+PT_GPR(12)[ep], r12;				      \
-	sld.w	PTO+PT_GPR(13)[ep], r13;				      \
-	sld.w	PTO+PT_GPR(14)[ep], r14;				      \
-	sld.w	PTO+PT_GPR(15)[ep], r15;				      \
-	sld.w	PTO+PT_GPR(16)[ep], r16;				      \
-	sld.w	PTO+PT_GPR(17)[ep], r17;				      \
-	sld.w	PTO+PT_GPR(18)[ep], r18;				      \
-	sld.w	PTO+PT_GPR(19)[ep], r19
-
-/* Save `call clobbered' registers to the state-save-frame pointed to by EP.  */
-#define SAVE_CALL_CLOBBERED_REGS					      \
-	SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS;				      \
-	SAVE_ARG_REGS;							      \
-	SAVE_RVAL_REGS;							      \
-	SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL
-/* Restore `call clobbered' registers from the state-save-frame pointed to
-   by EP.  */
-#define RESTORE_CALL_CLOBBERED_REGS					      \
-	RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS;			      \
-	RESTORE_ARG_REGS;						      \
-	RESTORE_RVAL_REGS;						      \
-	RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL
-
-/* Save `call clobbered' registers except for the return-value registers
-   to the state-save-frame pointed to by EP.  */
-#define SAVE_CALL_CLOBBERED_REGS_NO_RVAL				      \
-	SAVE_CALL_CLOBBERED_REGS_BEFORE_ARGS;				      \
-	SAVE_ARG_REGS;							      \
-	SAVE_CALL_CLOBBERED_REGS_AFTER_RVAL
-/* Restore `call clobbered' registers except for the return-value registers
-   from the state-save-frame pointed to by EP.  */
-#define RESTORE_CALL_CLOBBERED_REGS_NO_RVAL				      \
-	RESTORE_CALL_CLOBBERED_REGS_BEFORE_ARGS;			      \
-	RESTORE_ARG_REGS;						      \
-	RESTORE_CALL_CLOBBERED_REGS_AFTER_RVAL
-
-/* Save `call saved' registers to the state-save-frame pointed to by EP.  */
-#define SAVE_CALL_SAVED_REGS						      \
-	sst.w	r2, PTO+PT_GPR(2)[ep];					      \
-	sst.w	r20, PTO+PT_GPR(20)[ep];				      \
-	sst.w	r21, PTO+PT_GPR(21)[ep];				      \
-	sst.w	r22, PTO+PT_GPR(22)[ep];				      \
-	sst.w	r23, PTO+PT_GPR(23)[ep];				      \
-	sst.w	r24, PTO+PT_GPR(24)[ep];				      \
-	sst.w	r25, PTO+PT_GPR(25)[ep];				      \
-	sst.w	r26, PTO+PT_GPR(26)[ep];				      \
-	sst.w	r27, PTO+PT_GPR(27)[ep];				      \
-	sst.w	r28, PTO+PT_GPR(28)[ep];				      \
-	sst.w	r29, PTO+PT_GPR(29)[ep]
-/* Restore `call saved' registers from the state-save-frame pointed to by EP.  */
-#define RESTORE_CALL_SAVED_REGS						      \
-	sld.w	PTO+PT_GPR(2)[ep], r2;					      \
-	sld.w	PTO+PT_GPR(20)[ep], r20;				      \
-	sld.w	PTO+PT_GPR(21)[ep], r21;				      \
-	sld.w	PTO+PT_GPR(22)[ep], r22;				      \
-	sld.w	PTO+PT_GPR(23)[ep], r23;				      \
-	sld.w	PTO+PT_GPR(24)[ep], r24;				      \
-	sld.w	PTO+PT_GPR(25)[ep], r25;				      \
-	sld.w	PTO+PT_GPR(26)[ep], r26;				      \
-	sld.w	PTO+PT_GPR(27)[ep], r27;				      \
-	sld.w	PTO+PT_GPR(28)[ep], r28;				      \
-	sld.w	PTO+PT_GPR(29)[ep], r29
-
-
-/* Save the PC stored in the special register SAVEREG to the state-save-frame
-   pointed to by EP.  r19 is clobbered.  */
-#define SAVE_PC(savereg)						      \
-	stsr	SR_ ## savereg, r19;					      \
-	sst.w	r19, PTO+PT_PC[ep]
-/* Restore the PC from the state-save-frame pointed to by EP, to the special
-   register SAVEREG.  LP is clobbered (it is used as a scratch register
-   because the POP_STATE macro restores it, and this macro is usually used
-   inside POP_STATE).  */
-#define RESTORE_PC(savereg)						      \
-	sld.w	PTO+PT_PC[ep], lp;					      \
-	ldsr	lp, SR_ ## savereg
-/* Save the PSW register stored in the special register SAVREG to the
-   state-save-frame pointed to by EP.  r19 is clobbered.  */
-#define SAVE_PSW(savereg)						      \
-	stsr	SR_ ## savereg, r19;					      \
-	sst.w	r19, PTO+PT_PSW[ep]
-/* Restore the PSW register from the state-save-frame pointed to by EP, to
-   the special register SAVEREG.  LP is clobbered (it is used as a scratch
-   register because the POP_STATE macro restores it, and this macro is
-   usually used inside POP_STATE).  */
-#define RESTORE_PSW(savereg)						      \
-	sld.w	PTO+PT_PSW[ep], lp;					      \
-	ldsr	lp, SR_ ## savereg
-
-/* Save CTPC/CTPSW/CTBP registers to the state-save-frame pointed to by REG.
-   r19 is clobbered.  */
-#define SAVE_CT_REGS							      \
-	stsr	SR_CTPC, r19;						      \
-	sst.w	r19, PTO+PT_CTPC[ep];					      \
-	stsr	SR_CTPSW, r19;						      \
-	sst.w	r19, PTO+PT_CTPSW[ep];					      \
-	stsr	SR_CTBP, r19;						      \
-	sst.w	r19, PTO+PT_CTBP[ep]
-/* Restore CTPC/CTPSW/CTBP registers from the state-save-frame pointed to by EP.
-   LP is clobbered (it is used as a scratch register because the POP_STATE
-   macro restores it, and this macro is usually used inside POP_STATE).  */
-#define RESTORE_CT_REGS							      \
-	sld.w	PTO+PT_CTPC[ep], lp;					      \
-	ldsr	lp, SR_CTPC;						      \
-	sld.w	PTO+PT_CTPSW[ep], lp;					      \
-	ldsr	lp, SR_CTPSW;						      \
-	sld.w	PTO+PT_CTBP[ep], lp;					      \
-	ldsr	lp, SR_CTBP
-
-
-/* Push register state, except for the stack pointer, on the stack in the
-   form of a state-save-frame (plus some extra padding), in preparation for
-   a system call.  This macro makes sure that the EP, GP, and LP
-   registers are saved, and TYPE identifies the set of extra registers to
-   be saved as well.  Also copies (the new value of) SP to EP.  */
-#define PUSH_STATE(type)						      \
-	addi	-STATE_SAVE_SIZE, sp, sp; /* Make room on the stack.  */      \
-	st.w	ep, PTO+PT_GPR(GPR_EP)[sp];				      \
-	mov	sp, ep;							      \
-	sst.w	gp, PTO+PT_GPR(GPR_GP)[ep];				      \
-	sst.w	lp, PTO+PT_GPR(GPR_LP)[ep];				      \
-	type ## _STATE_SAVER
-/* Pop a register state pushed by PUSH_STATE, except for the stack pointer,
-   from the stack.  */
-#define POP_STATE(type)							      \
-	mov	sp, ep;							      \
-	type ## _STATE_RESTORER;					      \
-	sld.w	PTO+PT_GPR(GPR_GP)[ep], gp;				      \
-	sld.w	PTO+PT_GPR(GPR_LP)[ep], lp;				      \
-	sld.w	PTO+PT_GPR(GPR_EP)[ep], ep;				      \
-	addi	STATE_SAVE_SIZE, sp, sp /* Clean up our stack space.  */
-
-
-/* Switch to the kernel stack if necessary, and push register state on the
-   stack in the form of a state-save-frame.  Also load the current task
-   pointer if switching from user mode.  The stack-pointer (r3) should have
-   already been saved to the memory location SP_SAVE_LOC (the reason for
-   this is that the interrupt vectors may be beyond a 22-bit signed offset
-   jump from the actual interrupt handler, and this allows them to save the
-   stack-pointer and use that register to do an indirect jump).  This macro
-   makes sure that `special' registers, system registers, and the stack
-   pointer are saved; TYPE identifies the set of extra registers to be
-   saved as well.  SYSCALL_NUM is the register in which the system-call
-   number this state is for is stored (r0 if this isn't a system call).
-   Interrupts should already be disabled when calling this.  */
-#define SAVE_STATE(type, syscall_num, sp_save_loc)			      \
-	tst1	0, KM;			/* See if already in kernel mode.  */ \
-	bz	1f;							      \
-	ld.w	sp_save_loc, sp;	/* ... yes, use saved SP.  */	      \
-	br	2f;							      \
-1:	ld.w	KSP, sp;		/* ... no, switch to kernel stack. */ \
-2:	PUSH_STATE(type);						      \
-	ld.b	KM, r19;		/* Remember old kernel-mode.  */      \
-	sst.w	r19, PTO+PT_KERNEL_MODE[ep];				      \
-	ld.w	sp_save_loc, r19;	/* Remember old SP.  */		      \
-	sst.w	r19, PTO+PT_GPR(GPR_SP)[ep];				      \
-	mov	1, r19;			/* Now definitely in kernel-mode. */  \
-	st.b	r19, KM;						      \
-	GET_CURRENT_TASK(CURRENT_TASK);	/* Fetch the current task pointer. */ \
-	/* Save away the syscall number.  */				      \
-	sst.w	syscall_num, PTO+PT_CUR_SYSCALL[ep]
-
-
-/* Save register state not normally saved by PUSH_STATE for TYPE, to the
-   state-save-frame on the stack; also copies SP to EP.  r19 may be trashed. */
-#define SAVE_EXTRA_STATE(type)						      \
-	mov	sp, ep;							      \
-	type ## _EXTRA_STATE_SAVER
-/* Restore register state not normally restored by POP_STATE for TYPE,
-   from the state-save-frame on the stack; also copies SP to EP.
-   r19 may be trashed.  */
-#define RESTORE_EXTRA_STATE(type)					      \
-	mov	sp, ep;							      \
-	type ## _EXTRA_STATE_RESTORER
-
-/* Save any call-clobbered registers not normally saved by PUSH_STATE for
-   TYPE, to the state-save-frame on the stack.
-   EP may be trashed, but is not guaranteed to contain a copy of SP
-   (unlike after most SAVE_... macros).  r19 may be trashed.  */
-#define SAVE_EXTRA_STATE_FOR_SCHEDULE(type)				      \
-	type ## _SCHEDULE_EXTRA_STATE_SAVER
-/* Restore any call-clobbered registers not normally restored by
-   POP_STATE for TYPE, to the state-save-frame on the stack.
-   EP may be trashed, but is not guaranteed to contain a copy of SP
-   (unlike after most RESTORE_... macros).  r19 may be trashed.  */
-#define RESTORE_EXTRA_STATE_FOR_SCHEDULE(type)				      \
-	type ## _SCHEDULE_EXTRA_STATE_RESTORER
-
-
-/* These are extra_state_saver/restorer values for a user trap.  Note
-   that we save the argument registers so that restarted syscalls will
-   function properly (otherwise it wouldn't be necessary), and we must
-   _not_ restore the return-value registers (so that traps can return a
-   value!), but call-clobbered registers are not saved at all, as the
-   caller of the syscall function should have saved them.  */
-
-#define TRAP_RET reti
-/* Traps don't save call-clobbered registers (but do still save arg regs).
-   We preserve PSw to keep long-term state, namely interrupt status (for traps
-   from kernel-mode), and the single-step flag (for user traps).  */
-#define TRAP_STATE_SAVER						      \
-	SAVE_ARG_REGS;							      \
-	SAVE_PC(EIPC);							      \
-	SAVE_PSW(EIPSW)
-/* When traps return, they just leave call-clobbered registers (except for arg
-   regs) with whatever value they have from the kernel.  Traps don't preserve
-   the PSW, but we zero EIPSW to ensure it doesn't contain anything dangerous
-   (in particular, the single-step flag).  */
-#define TRAP_STATE_RESTORER						      \
-	RESTORE_ARG_REGS;						      \
-	RESTORE_PC(EIPC);						      \
-	RESTORE_PSW(EIPSW)
-/* Save registers not normally saved by traps.  We need to save r12, even
-   though it's nominally call-clobbered, because it's used when restarting
-   a system call (the signal-handling path uses SAVE_EXTRA_STATE, and
-   expects r12 to be restored when the trap returns).  */
-#define TRAP_EXTRA_STATE_SAVER						      \
-	SAVE_RVAL_REGS;							      \
-	sst.w	r12, PTO+PT_GPR(12)[ep];				      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_CT_REGS
-#define TRAP_EXTRA_STATE_RESTORER					      \
-	RESTORE_RVAL_REGS;						      \
-	sld.w	PTO+PT_GPR(12)[ep], r12;				      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_CT_REGS
-/* Save registers prior to calling scheduler (just before trap returns).
-   We have to save the return-value registers to preserve the trap's return
-   value.  Note that ..._SCHEDULE_EXTRA_STATE_SAVER, unlike most ..._SAVER
-   macros, is required to setup EP itself if EP is needed (this is because
-   in many cases, the macro is empty).  */
-#define TRAP_SCHEDULE_EXTRA_STATE_SAVER					      \
-	mov sp, ep;							      \
-	SAVE_RVAL_REGS
-/* Note that ..._SCHEDULE_EXTRA_STATE_RESTORER, unlike most ..._RESTORER
-   macros, is required to setup EP itself if EP is needed (this is because
-   in many cases, the macro is empty).  */
-#define TRAP_SCHEDULE_EXTRA_STATE_RESTORER				      \
-	mov sp, ep;							      \
-	RESTORE_RVAL_REGS
-
-/* Register saving/restoring for maskable interrupts.  */
-#define IRQ_RET reti
-#define IRQ_STATE_SAVER							      \
-	SAVE_CALL_CLOBBERED_REGS;					      \
-	SAVE_PC(EIPC);							      \
-	SAVE_PSW(EIPSW)
-#define IRQ_STATE_RESTORER						      \
-	RESTORE_CALL_CLOBBERED_REGS;					      \
-	RESTORE_PC(EIPC);						      \
-	RESTORE_PSW(EIPSW)
-#define IRQ_EXTRA_STATE_SAVER						      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_CT_REGS
-#define IRQ_EXTRA_STATE_RESTORER					      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_CT_REGS
-#define IRQ_SCHEDULE_EXTRA_STATE_SAVER	     /* nothing */
-#define IRQ_SCHEDULE_EXTRA_STATE_RESTORER    /* nothing */
-
-/* Register saving/restoring for non-maskable interrupts.  */
-#define NMI_RET reti
-#define NMI_STATE_SAVER							      \
-	SAVE_CALL_CLOBBERED_REGS;					      \
-	SAVE_PC(FEPC);							      \
-	SAVE_PSW(FEPSW);
-#define NMI_STATE_RESTORER						      \
-	RESTORE_CALL_CLOBBERED_REGS;					      \
-	RESTORE_PC(FEPC);						      \
-	RESTORE_PSW(FEPSW);
-#define NMI_EXTRA_STATE_SAVER						      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_CT_REGS
-#define NMI_EXTRA_STATE_RESTORER					      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_CT_REGS
-#define NMI_SCHEDULE_EXTRA_STATE_SAVER	     /* nothing */
-#define NMI_SCHEDULE_EXTRA_STATE_RESTORER    /* nothing */
-
-/* Register saving/restoring for debug traps.  */
-#define DBTRAP_RET .long 0x014607E0 /* `dbret', but gas doesn't support it. */
-#define DBTRAP_STATE_SAVER						      \
-	SAVE_CALL_CLOBBERED_REGS;					      \
-	SAVE_PC(DBPC);							      \
-	SAVE_PSW(DBPSW)
-#define DBTRAP_STATE_RESTORER						      \
-	RESTORE_CALL_CLOBBERED_REGS;					      \
-	RESTORE_PC(DBPC);						      \
-	RESTORE_PSW(DBPSW)
-#define DBTRAP_EXTRA_STATE_SAVER					      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_CT_REGS
-#define DBTRAP_EXTRA_STATE_RESTORER					      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_CT_REGS
-#define DBTRAP_SCHEDULE_EXTRA_STATE_SAVER	/* nothing */
-#define DBTRAP_SCHEDULE_EXTRA_STATE_RESTORER	/* nothing */
-
-/* Register saving/restoring for a context switch.  We don't need to save
-   too many registers, because context-switching looks like a function call
-   (via the function `switch_thread'), so callers will save any
-   call-clobbered registers themselves.  We do need to save the CT regs, as
-   they're normally not saved during kernel entry (the kernel doesn't use
-   them).  We save PSW so that interrupt-status state will correctly follow
-   each thread (mostly NMI vs. normal-IRQ/trap), though for the most part
-   it doesn't matter since threads are always in almost exactly the same
-   processor state during a context switch.  The stack pointer and return
-   value are handled by switch_thread itself.  */
-#define SWITCH_STATE_SAVER						      \
-	SAVE_CALL_SAVED_REGS;						      \
-	SAVE_PSW(PSW);							      \
-	SAVE_CT_REGS
-#define SWITCH_STATE_RESTORER						      \
-	RESTORE_CALL_SAVED_REGS;					      \
-	RESTORE_PSW(PSW);						      \
-	RESTORE_CT_REGS
-
-
-/* Restore register state from the state-save-frame on the stack, switch back
-   to the user stack if necessary, and return from the trap/interrupt.
-   EXTRA_STATE_RESTORER is a sequence of assembly language statements to
-   restore anything not restored by this macro.  Only registers not saved by
-   the C compiler are restored (that is, R3(sp), R4(gp), R31(lp), and
-   anything restored by EXTRA_STATE_RESTORER).  */
-#define RETURN(type)							      \
-	ld.b	PTO+PT_KERNEL_MODE[sp], r19;				      \
-	di;				/* Disable interrupts */	      \
-	cmp	r19, r0;		/* See if returning to kernel mode, */\
-	bne	2f;			/* ... if so, skip resched &c.  */    \
-									      \
-	/* We're returning to user mode, so check for various conditions that \
-	   trigger rescheduling. */					      \
-	GET_CURRENT_THREAD(r18);					      \
-	ld.w	TI_FLAGS[r18], r19;					      \
-	andi	_TIF_NEED_RESCHED, r19, r0;				      \
-	bnz	3f;			/* Call the scheduler.  */	      \
-5:	andi	_TIF_SIGPENDING, r19, r18;				      \
-	ld.w	TASK_PTRACE[CURRENT_TASK], r19; /* ptrace flags */	      \
-	or	r18, r19;		/* see if either is non-zero */	      \
-	bnz	4f;			/* if so, handle them */	      \
-									      \
-/* Return to user state.  */						      \
-1:	st.b	r0, KM;			/* Now officially in user state. */   \
-									      \
-/* Final return.  The stack-pointer fiddling is not needed when returning     \
-   to kernel-mode, but they don't hurt, and this way we can share the	      \
-   (sometimes rather lengthy) POP_STATE macro.  */			      \
-2:	POP_STATE(type);						      \
-	st.w	sp, KSP;		/* Save the kernel stack pointer. */  \
-	ld.w	PT_GPR(GPR_SP)-PT_SIZE[sp], sp; /* Restore stack pointer. */  \
-	type ## _RET;			/* Return from the trap/interrupt. */ \
-									      \
-/* Call the scheduler before returning from a syscall/trap. */		      \
-3:	SAVE_EXTRA_STATE_FOR_SCHEDULE(type); /* Prepare to call scheduler. */ \
-	jarl	call_scheduler, lp;	/* Call scheduler */		      \
-	di;				/* The scheduler enables interrupts */\
-	RESTORE_EXTRA_STATE_FOR_SCHEDULE(type);				      \
-	GET_CURRENT_THREAD(r18);					      \
-	ld.w	TI_FLAGS[r18], r19;					      \
-	br	5b;			/* Continue with return path. */      \
-									      \
-/* Handle a signal or ptraced process return.				      \
-   r18 should be non-zero if there are pending signals.  */		      \
-4:	/* Not all registers are saved by the normal trap/interrupt entry     \
-	   points (for instance, call-saved registers (because the normal     \
-	   C-compiler calling sequence in the kernel makes sure they're	      \
-	   preserved), and call-clobbered registers in the case of	      \
-	   traps), but signal handlers may want to examine or change the      \
-	   complete register state.  Here we save anything not saved by	      \
-	   the normal entry sequence, so that it may be safely restored	      \
-	   (in a possibly modified form) after do_signal returns.  */	      \
-	SAVE_EXTRA_STATE(type);		/* Save state not saved by entry. */  \
-	jarl	handle_signal_or_ptrace_return, lp;			      \
-	RESTORE_EXTRA_STATE(type);	/* Restore extra regs.  */	      \
-	br	1b
-
-
-/* Jump to the appropriate function for the system call number in r12
-   (r12 is not preserved), or return an error if r12 is not valid.  The
-   LP register should point to the location where the called function
-   should return.  [note that MAKE_SYS_CALL uses label 1]  */
-#define MAKE_SYS_CALL							      \
-	/* Figure out which function to use for this system call.  */	      \
-	shl	2, r12;							      \
-	/* See if the system call number is valid.  */			      \
-	addi	lo(CSYM(sys_call_table) - sys_call_table_end), r12, r0;	      \
-	bnh	1f;							      \
-	mov	hilo(CSYM(sys_call_table)), r19;			      \
-	add	r19, r12;						      \
-	ld.w	0[r12], r12;						      \
-	/* Make the system call.  */					      \
-	jmp	[r12];							      \
-	/* The syscall number is invalid, return an error.  */		      \
-1:	addi	-ENOSYS, r0, r10;					      \
-	jmp	[lp]
-
-
-	.text
-
-/*
- * User trap.
- *
- * Trap 0 system calls are also handled here.
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- *
- * Syscall protocol:
- *   Syscall number in r12, args in r6-r9
- *   Return value in r10
- */
-G_ENTRY(trap):
-	SAVE_STATE (TRAP, r12, ENTRY_SP) // Save registers.
-	stsr	SR_ECR, r19		// Find out which trap it was.
-	ei				// Enable interrupts.
-	mov	hilo(ret_from_trap), lp	// where the trap should return
-
-	// The following two shifts (1) clear out extraneous NMI data in the
-	// upper 16-bits, (2) convert the 0x40 - 0x5f range of trap ECR
-	// numbers into the (0-31) << 2 range we want, (3) set the flags.
-	shl	27, r19			// chop off all high bits
-	shr	25, r19			// scale back down and then << 2
-	bnz	2f			// See if not trap 0.
-
-	// Trap 0 is a `short' system call, skip general trap table.
-	MAKE_SYS_CALL			// Jump to the syscall function.
-
-2:	// For other traps, use a table lookup.
-	mov	hilo(CSYM(trap_table)), r18
-	add	r19, r18
-	ld.w	0[r18], r18
-	jmp	[r18]			// Jump to the trap handler.
-END(trap)
-
-/* This is just like ret_from_trap, but first restores extra registers
-   saved by some wrappers.  */
-L_ENTRY(restore_extra_regs_and_ret_from_trap):
-	RESTORE_EXTRA_STATE(TRAP)
-	// fall through
-END(restore_extra_regs_and_ret_from_trap)
-
-/* Entry point used to return from a syscall/trap.  */
-L_ENTRY(ret_from_trap):
-	RETURN(TRAP)
-END(ret_from_trap)
-
-
-/* This the initial entry point for a new child thread, with an appropriate
-   stack in place that makes it look that the child is in the middle of an
-   syscall.  This function is actually `returned to' from switch_thread
-   (copy_thread makes ret_from_fork the return address in each new thread's
-   saved context).  */
-C_ENTRY(ret_from_fork):
-	mov	r10, r6			// switch_thread returns the prev task.
-	jarl	CSYM(schedule_tail), lp	// ...which is schedule_tail's arg
-	mov	r0, r10			// Child's fork call should return 0.
-	br	ret_from_trap		// Do normal trap return.
-C_END(ret_from_fork)
-
-
-/*
- * Trap 1: `long' system calls
- * `Long' syscall protocol:
- *   Syscall number in r12, args in r6-r9, r13-r14
- *   Return value in r10
- */
-L_ENTRY(syscall_long):
-	// Push extra arguments on the stack.  Note that by default, the trap
-	// handler reserves enough stack space for 6 arguments, so we don't
-	// have to make any additional room.
-	st.w	r13, 16[sp]		// arg 5
-	st.w	r14, 20[sp]		// arg 6
-
-	// Make sure r13 and r14 are preserved, in case we have to restart a
-	// system call because of a signal (ep has already been set by caller).
-	st.w	r13, PTO+PT_GPR(13)[sp]
-	st.w	r14, PTO+PT_GPR(13)[sp]
-	mov	hilo(ret_from_long_syscall), lp
-
-	MAKE_SYS_CALL			// Jump to the syscall function.
-END(syscall_long)
-
-/* Entry point used to return from a long syscall.  Only needed to restore
-   r13/r14 if the general trap mechanism doesnt' do so.  */
-L_ENTRY(ret_from_long_syscall):
-	ld.w	PTO+PT_GPR(13)[sp], r13 // Restore the extra registers
-	ld.w	PTO+PT_GPR(13)[sp], r14
-	br	ret_from_trap		// The rest is the same as other traps
-END(ret_from_long_syscall)
-
-
-/* These syscalls need access to the struct pt_regs on the stack, so we
-   implement them in assembly (they're basically all wrappers anyway).  */
-
-L_ENTRY(sys_fork_wrapper):
-#ifdef CONFIG_MMU
-	addi	SIGCHLD, r0, r6		   // Arg 0: flags
-	ld.w	PTO+PT_GPR(GPR_SP)[sp], r7 // Arg 1: child SP (use parent's)
-	movea	PTO, sp, r8		   // Arg 2: parent context
-	mov	r0, r9			   // Arg 3/4/5: 0
-	st.w	r0, 16[sp]
-	st.w	r0, 20[sp]
-	mov	hilo(CSYM(do_fork)), r18   // Where the real work gets done
-	br	save_extra_state_tramp	   // Save state and go there
-#else
-	// fork almost works, enough to trick you into looking elsewhere :-(
-	addi	-EINVAL, r0, r10
-	jmp	[lp]
-#endif
-END(sys_fork_wrapper)
-
-L_ENTRY(sys_vfork_wrapper):
-	addi	CLONE_VFORK | CLONE_VM | SIGCHLD, r0, r6 // Arg 0: flags
-	ld.w	PTO+PT_GPR(GPR_SP)[sp], r7 // Arg 1: child SP (use parent's)
-	movea	PTO, sp, r8		   // Arg 2: parent context
-	mov	r0, r9			   // Arg 3/4/5: 0
-	st.w	r0, 16[sp]
-	st.w	r0, 20[sp]
-	mov	hilo(CSYM(do_fork)), r18   // Where the real work gets done
-	br	save_extra_state_tramp	   // Save state and go there
-END(sys_vfork_wrapper)
-
-L_ENTRY(sys_clone_wrapper):
-	ld.w	PTO+PT_GPR(GPR_SP)[sp], r19// parent's stack pointer
-	cmp	r7, r0			   // See if child SP arg (arg 1) is 0.
-	cmov	z, r19, r7, r7		   // ... and use the parent's if so.
-	movea	PTO, sp, r8		   // Arg 2: parent context
-	mov	r0, r9			   // Arg 3/4/5: 0
-	st.w	r0, 16[sp]
-	st.w	r0, 20[sp]
-	mov	hilo(CSYM(do_fork)), r18   // Where the real work gets done
-	br	save_extra_state_tramp	   // Save state and go there
-END(sys_clone_wrapper)
-
-
-L_ENTRY(sys_execve_wrapper):
-	movea	PTO, sp, r9		// add user context as 4th arg
-	jr	CSYM(sys_execve)	// Do real work (tail-call).
-END(sys_execve_wrapper)
-
-
-L_ENTRY(sys_sigsuspend_wrapper):
-	movea	PTO, sp, r7		// add user context as 2nd arg
-	mov	hilo(CSYM(sys_sigsuspend)), r18	// syscall function
-	jarl	save_extra_state_tramp, lp	// Save state and do it
-	br	restore_extra_regs_and_ret_from_trap
-END(sys_sigsuspend_wrapper)
-L_ENTRY(sys_rt_sigsuspend_wrapper):
-	movea	PTO, sp, r8		// add user context as 3rd arg
-	mov	hilo(CSYM(sys_rt_sigsuspend)), r18 // syscall function
-	jarl	save_extra_state_tramp, lp	   // Save state and do it
-	br	restore_extra_regs_and_ret_from_trap
-END(sys_rt_sigsuspend_wrapper)
-
-L_ENTRY(sys_sigreturn_wrapper):
-	movea	PTO, sp, r6		// add user context as 1st arg
-	mov	hilo(CSYM(sys_sigreturn)), r18	// syscall function
-	jarl	save_extra_state_tramp, lp	// Save state and do it
-	br	restore_extra_regs_and_ret_from_trap
-END(sys_sigreturn_wrapper)
-L_ENTRY(sys_rt_sigreturn_wrapper):
-	movea	PTO, sp, r6		// add user context as 1st arg
-	mov	hilo(CSYM(sys_rt_sigreturn)), r18// syscall function
-	jarl	save_extra_state_tramp, lp	 // Save state and do it
-	br	restore_extra_regs_and_ret_from_trap
-END(sys_rt_sigreturn_wrapper)
-
-
-/* Save any state not saved by SAVE_STATE(TRAP), and jump to r18.
-   It's main purpose is to share the rather lengthy code sequence that
-   SAVE_STATE expands into among the above wrapper functions.  */
-L_ENTRY(save_extra_state_tramp):
-	SAVE_EXTRA_STATE(TRAP)		// Save state not saved by entry.
-	jmp	[r18]			// Do the work the caller wants
-END(save_extra_state_tramp)
-
-
-/*
- * Hardware maskable interrupts.
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- */
-G_ENTRY(irq):
-	SAVE_STATE (IRQ, r0, ENTRY_SP)	// Save registers.
-
-	stsr	SR_ECR, r6		// Find out which interrupt it was.
-	movea	PTO, sp, r7		// User regs are arg2
-
-	// All v850 implementations I know about encode their interrupts as
-	// multiples of 0x10, starting at 0x80 (after NMIs and software
-	// interrupts).  Convert this number into a simple IRQ index for the
-	// rest of the kernel.  We also clear the upper 16 bits, which hold
-	// NMI info, and don't appear to be cleared when a NMI returns.
-	shl	16, r6			// clear upper 16 bits
-	shr	20, r6			// shift back, and remove lower nibble
-	add	-8, r6			// remove bias for irqs
-
-	// Call the high-level interrupt handling code.
-	jarl	CSYM(handle_irq), lp
-
-	RETURN(IRQ)
-END(irq)
-
-
-/*
- * Debug trap / illegal-instruction exception
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- */
-G_ENTRY(dbtrap):
-	SAVE_STATE (DBTRAP, r0, ENTRY_SP)// Save registers.
-
-	/* First see if we came from kernel mode; if so, the dbtrap
-	   instruction has a special meaning, to set the DIR (`debug
-	   information register') register.  This is because the DIR register
-	   can _only_ be manipulated/read while in `debug mode,' and debug
-	   mode is only active while we're inside the dbtrap handler.  The
-	   exact functionality is:  { DIR = (DIR | r6) & ~r7; return DIR; }. */
-	ld.b	PTO+PT_KERNEL_MODE[sp], r19
-	cmp	r19, r0
-	bz	1f
-
-	stsr	SR_DIR, r10
-	or	r6, r10
-	not	r7, r7
-	and	r7, r10
-	ldsr	r10, SR_DIR
-	stsr	SR_DIR, r10		// Confirm the value we set
-	st.w	r10, PTO+PT_GPR(10)[sp]	// return it
-	br	3f
-
-1:	ei				// Enable interrupts.
-
-	/* The default signal type we raise.  */
-	mov	SIGTRAP, r6
-
-	/* See if it's a single-step trap.  */
-	stsr	SR_DBPSW, r19
-	andi	0x0800, r19, r19
-	bnz	2f
-
-	/* Look to see if the preceding instruction was is a dbtrap or not,
-	   to decide which signal we should use.  */
-	stsr	SR_DBPC, r19		// PC following trapping insn
-	ld.hu	-2[r19], r19
-	ori	0xf840, r0, r20		// DBTRAP insn
-	cmp	r19, r20		// Was this trap caused by DBTRAP?
-	cmov	ne, SIGILL, r6, r6	// Choose signal appropriately
-
-	/* Raise the desired signal.  */
-2:	mov	CURRENT_TASK, r7	// Arg 1: task
-	jarl	CSYM(send_sig), lp	// tail call
-
-3:	RETURN(DBTRAP)
-END(dbtrap)
-
-
-/*
- * Hardware non-maskable interrupts.
- *
- * The stack-pointer (r3) should have already been saved to the memory
- * location ENTRY_SP (the reason for this is that the interrupt vectors may be
- * beyond a 22-bit signed offset jump from the actual interrupt handler, and
- * this allows them to save the stack-pointer and use that register to do an
- * indirect jump).
- */
-G_ENTRY(nmi):
-	SAVE_STATE (NMI, r0, NMI_ENTRY_SP); /* Save registers.  */
-
-	stsr	SR_ECR, r6;		/* Find out which nmi it was.  */
-	shr	20, r6;			/* Extract NMI code in bits 20-24. */
-	movea	PTO, sp, r7;		/* User regs are arg2.  */
-
-	/* Non-maskable interrupts always lie right after maskable interrupts.
-	   Call the generic IRQ handler, with two arguments, the IRQ number,
-	   and a pointer to the user registers, to handle the specifics.
-	   (we subtract one because the first NMI has code 1).  */
-	addi	FIRST_NMI - 1, r6, r6
-	jarl	CSYM(handle_irq), lp
-
-	RETURN(NMI)
-END(nmi)
-
-
-/*
- * Trap with no handler
- */
-L_ENTRY(bad_trap_wrapper):
-	mov	r19, r6			// Arg 0: trap number
-	movea	PTO, sp, r7		// Arg 1: user regs
-	jr	CSYM(bad_trap)		// tail call handler
-END(bad_trap_wrapper)
-
-
-/*
- * Invoke the scheduler, called from the trap/irq kernel exit path.
- *
- * This basically just calls `schedule', but also arranges for extra
- * registers to be saved for ptrace'd processes, so ptrace can modify them.
- */
-L_ENTRY(call_scheduler):
-	ld.w	TASK_PTRACE[CURRENT_TASK], r19	// See if task is ptrace'd
-	cmp	r19, r0
-	bnz	1f			// ... yes, do special stuff
-	jr	CSYM(schedule)		// ... no, just tail-call scheduler
-
-	// Save extra regs for ptrace'd task.  We want to save anything
-	// that would otherwise only be `implicitly' saved by the normal
-	// compiler calling-convention.
-1:	mov	sp, ep			// Setup EP for SAVE_CALL_SAVED_REGS
-	SAVE_CALL_SAVED_REGS		// Save call-saved registers to stack
-	mov	lp, r20			// Save LP in a callee-saved register
-
-	jarl	CSYM(schedule), lp	// Call scheduler
-
-	mov	r20, lp
-	mov	sp, ep			// We can't rely on EP after return
-	RESTORE_CALL_SAVED_REGS		// Restore (possibly modified) regs
-	jmp	[lp]			// Return to the return path
-END(call_scheduler)
-
-
-/*
- * This is an out-of-line handler for two special cases during the kernel
- * trap/irq exit sequence:
- *
- *  (1) If r18 is non-zero then a signal needs to be handled, which is
- *	done, and then the caller returned to.
- *
- *  (2) If r18 is non-zero then we're returning to a ptraced process, which
- *	has several special cases -- single-stepping and trap tracing, both
- *	of which require using the `dbret' instruction to exit the kernel
- *	instead of the normal `reti' (this is because the CPU not correctly
- *	single-step after a reti).  In this case, of course, this handler
- *	never returns to the caller.
- *
- * In either case, all registers should have been saved to the current
- * state-save-frame on the stack, except for callee-saved registers.
- *
- * [These two different cases are combined merely to avoid bloating the
- * macro-inlined code, not because they really make much sense together!]
- */
-L_ENTRY(handle_signal_or_ptrace_return):
-	cmp	r18, r0			// See if handling a signal
-	bz	1f			// ... nope, go do ptrace return
-
-	// Handle a signal
-	mov	lp, r20			// Save link-pointer
-	mov	r10, r21		// Save return-values (for trap)
-	mov	r11, r22
-
-	movea	PTO, sp, r6		// Arg 1: struct pt_regs *regs
-	mov	r0, r7			// Arg 2: sigset_t *oldset
-	jarl	CSYM(do_signal), lp	// Handle the signal
-	di				// sig handling enables interrupts
-
-	mov	r20, lp			// Restore link-pointer
-	mov	r21, r10		// Restore return-values (for trap)
-	mov	r22, r11
-	ld.w	TASK_PTRACE[CURRENT_TASK], r19  // check ptrace flags too
-	cmp	r19, r0
-	bnz	1f			// ... some set, so look more
-2:	jmp	[lp]			// ... none set, so return normally
-
-	// ptrace return
-1:	ld.w	PTO+PT_PSW[sp], r19	// Look at user-processes's flags
-	andi	0x0800, r19, r19	// See if single-step flag is set
-	bz	2b			// ... nope, return normally
-
-	// Return as if from a dbtrap insn
-	st.b	r0, KM			// Now officially in user state.
-	POP_STATE(DBTRAP)		// Restore regs
-	st.w	sp, KSP			// Save the kernel stack pointer.
-	ld.w	PT_GPR(GPR_SP)-PT_SIZE[sp], sp // Restore user stack pointer.
-	DBTRAP_RET			// Return from the trap/interrupt.
-END(handle_signal_or_ptrace_return)
-
-
-/*
- * This is where we switch between two threads.  The arguments are:
- *   r6 -- pointer to the struct thread for the `current' process
- *   r7 -- pointer to the struct thread for the `new' process.
- * when this function returns, it will return to the new thread.
- */
-C_ENTRY(switch_thread):
-	// Return the previous task (r10 is not clobbered by restore below)
-	mov	CURRENT_TASK, r10
-	// First, push the current processor state on the stack
-	PUSH_STATE(SWITCH)
-	// Now save the location of the kernel stack pointer for this thread;
-	// since we've pushed all other state on the stack, this is enough to
-	// restore it all later.
-	st.w	sp, THREAD_KSP[r6]
-	// Now restore the stack pointer from the new process
-	ld.w	THREAD_KSP[r7], sp
-	// ... and restore all state from that
-	POP_STATE(SWITCH)
-	// Update the current task pointer
-	GET_CURRENT_TASK(CURRENT_TASK)
-	// Now return into the new thread
-	jmp	[lp]
-C_END(switch_thread)
-
-
-	.data
-
-	.align 4
-C_DATA(trap_table):
-	.long bad_trap_wrapper		// trap 0, doesn't use trap table.
-	.long syscall_long		// trap 1, `long' syscall.
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-	.long bad_trap_wrapper
-C_END(trap_table)
-
-
-	.section .rodata
-
-	.align 4
-C_DATA(sys_call_table):
-	.long CSYM(sys_restart_syscall)	// 0
-	.long CSYM(sys_exit)
-	.long sys_fork_wrapper
-	.long CSYM(sys_read)
-	.long CSYM(sys_write)
-	.long CSYM(sys_open)		// 5
-	.long CSYM(sys_close)
-	.long CSYM(sys_waitpid)
-	.long CSYM(sys_creat)
-	.long CSYM(sys_link)
-	.long CSYM(sys_unlink)		// 10
-	.long sys_execve_wrapper
-	.long CSYM(sys_chdir)
-	.long CSYM(sys_time)
-	.long CSYM(sys_mknod)
-	.long CSYM(sys_chmod)		// 15
-	.long CSYM(sys_chown)
-	.long CSYM(sys_ni_syscall)	// was: break
-	.long CSYM(sys_ni_syscall)	// was: oldstat (aka stat)
-	.long CSYM(sys_lseek)
-	.long CSYM(sys_getpid)		// 20
-	.long CSYM(sys_mount)
-	.long CSYM(sys_oldumount)
-	.long CSYM(sys_setuid)
-	.long CSYM(sys_getuid)
-	.long CSYM(sys_stime)		// 25
-	.long CSYM(sys_ptrace)
-	.long CSYM(sys_alarm)
-	.long CSYM(sys_ni_syscall)	// was: oldfstat (aka fstat)
-	.long CSYM(sys_pause)
-	.long CSYM(sys_utime)		// 30
-	.long CSYM(sys_ni_syscall)	// was: stty
-	.long CSYM(sys_ni_syscall)	// was: gtty
-	.long CSYM(sys_access)
-	.long CSYM(sys_nice)
-	.long CSYM(sys_ni_syscall)	// 35, was: ftime
-	.long CSYM(sys_sync)
-	.long CSYM(sys_kill)
-	.long CSYM(sys_rename)
-	.long CSYM(sys_mkdir)
-	.long CSYM(sys_rmdir)		// 40
-	.long CSYM(sys_dup)
-	.long CSYM(sys_pipe)
-	.long CSYM(sys_times)
-	.long CSYM(sys_ni_syscall)	// was: prof
-	.long CSYM(sys_brk)		// 45
-	.long CSYM(sys_setgid)
-	.long CSYM(sys_getgid)
-	.long CSYM(sys_signal)
-	.long CSYM(sys_geteuid)
-	.long CSYM(sys_getegid)		// 50
-	.long CSYM(sys_acct)
-	.long CSYM(sys_umount)		// recycled never used phys()
-	.long CSYM(sys_ni_syscall)	// was: lock
-	.long CSYM(sys_ioctl)
-	.long CSYM(sys_fcntl)		// 55
-	.long CSYM(sys_ni_syscall)	// was: mpx
-	.long CSYM(sys_setpgid)
-	.long CSYM(sys_ni_syscall)	// was: ulimit
-	.long CSYM(sys_ni_syscall)
-	.long CSYM(sys_umask)		// 60
-	.long CSYM(sys_chroot)
-	.long CSYM(sys_ustat)
-	.long CSYM(sys_dup2)
-	.long CSYM(sys_getppid)
-	.long CSYM(sys_getpgrp)		// 65
-	.long CSYM(sys_setsid)
-	.long CSYM(sys_sigaction)
-	.long CSYM(sys_sgetmask)
-	.long CSYM(sys_ssetmask)
-	.long CSYM(sys_setreuid)	// 70
-	.long CSYM(sys_setregid)
-	.long sys_sigsuspend_wrapper
-	.long CSYM(sys_sigpending)
-	.long CSYM(sys_sethostname)
-	.long CSYM(sys_setrlimit)	// 75
-	.long CSYM(sys_getrlimit)
-	.long CSYM(sys_getrusage)
-	.long CSYM(sys_gettimeofday)
-	.long CSYM(sys_settimeofday)
-	.long CSYM(sys_getgroups)	// 80
-	.long CSYM(sys_setgroups)
-	.long CSYM(sys_select)
-	.long CSYM(sys_symlink)
-	.long CSYM(sys_ni_syscall)	// was: oldlstat (aka lstat)
-	.long CSYM(sys_readlink)	// 85
-	.long CSYM(sys_uselib)
-	.long CSYM(sys_swapon)
-	.long CSYM(sys_reboot)
-	.long CSYM(old_readdir)
-	.long CSYM(sys_mmap)		// 90
-	.long CSYM(sys_munmap)
-	.long CSYM(sys_truncate)
-	.long CSYM(sys_ftruncate)
-	.long CSYM(sys_fchmod)
-	.long CSYM(sys_fchown)		// 95
-	.long CSYM(sys_getpriority)
-	.long CSYM(sys_setpriority)
-	.long CSYM(sys_ni_syscall)	// was: profil
-	.long CSYM(sys_statfs)
-	.long CSYM(sys_fstatfs)		// 100
-	.long CSYM(sys_ni_syscall)	// i386: ioperm
-	.long CSYM(sys_socketcall)
-	.long CSYM(sys_syslog)
-	.long CSYM(sys_setitimer)
-	.long CSYM(sys_getitimer)	// 105
-	.long CSYM(sys_newstat)
-	.long CSYM(sys_newlstat)
-	.long CSYM(sys_newfstat)
-	.long CSYM(sys_ni_syscall)	// was: olduname (aka uname)
-	.long CSYM(sys_ni_syscall)	// 110, i386: iopl
-	.long CSYM(sys_vhangup)
-	.long CSYM(sys_ni_syscall)	// was: idle
-	.long CSYM(sys_ni_syscall)	// i386: vm86old
-	.long CSYM(sys_wait4)
-	.long CSYM(sys_swapoff)		// 115
-	.long CSYM(sys_sysinfo)
-	.long CSYM(sys_ipc)
-	.long CSYM(sys_fsync)
-	.long sys_sigreturn_wrapper
-	.long sys_clone_wrapper		// 120
-	.long CSYM(sys_setdomainname)
-	.long CSYM(sys_newuname)
-	.long CSYM(sys_ni_syscall)	// i386: modify_ldt, m68k: cacheflush
-	.long CSYM(sys_adjtimex)
-	.long CSYM(sys_ni_syscall)	// 125 - sys_mprotect
-	.long CSYM(sys_sigprocmask)
-	.long CSYM(sys_ni_syscall)	// sys_create_module
-	.long CSYM(sys_init_module)
-	.long CSYM(sys_delete_module)
-	.long CSYM(sys_ni_syscall)	// 130 - sys_get_kernel_syms
-	.long CSYM(sys_quotactl)
-	.long CSYM(sys_getpgid)
-	.long CSYM(sys_fchdir)
-	.long CSYM(sys_bdflush)
-	.long CSYM(sys_sysfs)		// 135
-	.long CSYM(sys_personality)
-	.long CSYM(sys_ni_syscall)	// for afs_syscall
-	.long CSYM(sys_setfsuid)
-	.long CSYM(sys_setfsgid)
-	.long CSYM(sys_llseek)		// 140
-	.long CSYM(sys_getdents)
-	.long CSYM(sys_select)		// for backward compat; remove someday
-	.long CSYM(sys_flock)
-	.long CSYM(sys_ni_syscall)	// sys_msync
-	.long CSYM(sys_readv)		// 145
-	.long CSYM(sys_writev)
-	.long CSYM(sys_getsid)
-	.long CSYM(sys_fdatasync)
-	.long CSYM(sys_sysctl)
-	.long CSYM(sys_ni_syscall)	// 150 - sys_mlock
-	.long CSYM(sys_ni_syscall)	// sys_munlock
-	.long CSYM(sys_ni_syscall)	// sys_mlockall
-	.long CSYM(sys_ni_syscall)	// sys_munlockall
-	.long CSYM(sys_sched_setparam)
-	.long CSYM(sys_sched_getparam)	// 155
-	.long CSYM(sys_sched_setscheduler)
-	.long CSYM(sys_sched_getscheduler)
-	.long CSYM(sys_sched_yield)
-	.long CSYM(sys_sched_get_priority_max)
-	.long CSYM(sys_sched_get_priority_min)	// 160
-	.long CSYM(sys_sched_rr_get_interval)
-	.long CSYM(sys_nanosleep)
-	.long CSYM(sys_ni_syscall)	// sys_mremap
-	.long CSYM(sys_setresuid)
-	.long CSYM(sys_getresuid)	// 165
-	.long CSYM(sys_ni_syscall)	// for vm86
-	.long CSYM(sys_ni_syscall)	// sys_query_module
-	.long CSYM(sys_poll)
-	.long CSYM(sys_nfsservctl)
-	.long CSYM(sys_setresgid)	// 170
-	.long CSYM(sys_getresgid)
-	.long CSYM(sys_prctl)
-	.long sys_rt_sigreturn_wrapper
-	.long CSYM(sys_rt_sigaction)
-	.long CSYM(sys_rt_sigprocmask)	// 175
-	.long CSYM(sys_rt_sigpending)
-	.long CSYM(sys_rt_sigtimedwait)
-	.long CSYM(sys_rt_sigqueueinfo)
-	.long sys_rt_sigsuspend_wrapper
-	.long CSYM(sys_pread64)		// 180
-	.long CSYM(sys_pwrite64)
-	.long CSYM(sys_lchown)
-	.long CSYM(sys_getcwd)
-	.long CSYM(sys_capget)
-	.long CSYM(sys_capset)		// 185
-	.long CSYM(sys_sigaltstack)
-	.long CSYM(sys_sendfile)
-	.long CSYM(sys_ni_syscall)	// streams1
-	.long CSYM(sys_ni_syscall)	// streams2
-	.long sys_vfork_wrapper		// 190
-	.long CSYM(sys_ni_syscall)
-	.long CSYM(sys_mmap2)
-	.long CSYM(sys_truncate64)
-	.long CSYM(sys_ftruncate64)
-	.long CSYM(sys_stat64)		// 195
-	.long CSYM(sys_lstat64)
-	.long CSYM(sys_fstat64)
-	.long CSYM(sys_fcntl64)
-	.long CSYM(sys_getdents64)
-	.long CSYM(sys_pivot_root)	// 200
-	.long CSYM(sys_gettid)
-	.long CSYM(sys_tkill)
-sys_call_table_end:
-C_END(sys_call_table)
diff --git a/arch/v850/kernel/fpga85e2c.c b/arch/v850/kernel/fpga85e2c.c
deleted file mode 100644
index ab9cf16a85c8..000000000000
--- a/arch/v850/kernel/fpga85e2c.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * arch/v850/kernel/fpga85e2c.h -- Machine-dependent defs for
- *	FPGA implementation of V850E2/NA85E2C
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-
-#include "mach.h"
-
-extern void memcons_setup (void);
-
-
-#define REG_DUMP_ADDR		0x220000
-
-
-extern struct irqaction reg_snap_action; /* fwd decl */
-
-
-void __init mach_early_init (void)
-{
-	int i;
-	const u32 *src;
-	register u32 *dst asm ("ep");
-	extern u32 _intv_end, _intv_load_start;
-
-	/* Set bus sizes: CS0 32-bit, CS1 16-bit, CS7 8-bit,
-	   everything else 32-bit.  */
-	V850E2_BSC = 0x2AA6;
-	for (i = 2; i <= 6; i++)
-		CSDEV(i) = 0;	/* 32 bit */
-
-	/* Ensure that the simulator halts on a panic, instead of going
-	   into an infinite loop inside the panic function.  */
-	panic_timeout = -1;
-
-	/* Move the interrupt vectors into their real location.  Note that
-	   any relocations there are relative to the real location, so we
-	   don't have to fix anything up.  We use a loop instead of calling
-	   memcpy to keep this a leaf function (to avoid a function
-	   prologue being generated).  */
-	dst = 0x10;		/* &_intv_start + 0x10.  */
-	src = &_intv_load_start;
-	do {
-		u32 t0 = src[0], t1 = src[1], t2 = src[2], t3 = src[3];
-		u32 t4 = src[4], t5 = src[5], t6 = src[6], t7 = src[7];
-		dst[0] = t0; dst[1] = t1; dst[2] = t2; dst[3] = t3;
-		dst[4] = t4; dst[5] = t5; dst[6] = t6; dst[7] = t7;
-		dst += 8;
-		src += 8;
-	} while (dst < &_intv_end);
-}
-
-void __init mach_setup (char **cmdline)
-{
-	memcons_setup ();
-
-	/* Setup up NMI0 to copy the registers to a known memory location.
-	   The FGPA board has a button that produces NMI0 when pressed, so
-	   this allows us to push the button, and then look at memory to see
-	   what's in the registers (there's no other way to easily do so).
-	   We have to use `setup_irq' instead of `request_irq' because it's
-	   still too early to do memory allocation.  */
-	setup_irq (IRQ_NMI (0), &reg_snap_action);
-}
-
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
-{
-	*ram_start = ERAM_ADDR;
-	*ram_len = ERAM_SIZE;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Setup up the timer interrupt.  The FPGA peripheral control
-	   registers _only_ work with single-bit writes (set1/clr1)!  */
-	__clear_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
-	__clear_bit (RPU_GTMC_CLK_BIT, &RPU_GTMC);
-	__set_bit (RPU_GTMC_CE_BIT, &RPU_GTMC);
-
-	/* We use the first RPU interrupt, which occurs every 8.192ms.  */
-	setup_irq (IRQ_RPU (0), timer_action);
-}
-
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-void machine_halt (void) __attribute__ ((noreturn));
-void machine_halt (void)
-{
-	for (;;) {
-		DWC(0) = 0x7777;
-		DWC(1) = 0x7777;
-		ASC = 0xffff;
-		FLGREG(0) = 1;	/* Halt immediately.  */
-		asm ("di; halt; nop; nop; nop; nop; nop");
-	}
-}
-
-void machine_restart (char *__unused)
-{
-	machine_halt ();
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-
-/* Interrupts */
-
-struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "RPU", IRQ_RPU(0),	IRQ_RPU_NUM,	1, 6 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize interrupts.  */
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-
-/* An interrupt handler that copies the registers to a known memory location,
-   for debugging purposes.  */
-
-static void make_reg_snap (int irq, void *dummy, struct pt_regs *regs)
-{
-	(*(unsigned *)REG_DUMP_ADDR)++;
-	(*(struct pt_regs *)(REG_DUMP_ADDR + sizeof (unsigned))) = *regs;
-}
-
-static int reg_snap_dev_id;
-static struct irqaction reg_snap_action = {
-	.handler = make_reg_snap,
-	.mask = CPU_MASK_NONE,
-	.name = "reg_snap",
-	.dev_id = &reg_snap_dev_id,
-};
diff --git a/arch/v850/kernel/fpga85e2c.ld b/arch/v850/kernel/fpga85e2c.ld
deleted file mode 100644
index b5d4578ae411..000000000000
--- a/arch/v850/kernel/fpga85e2c.ld
+++ /dev/null
@@ -1,62 +0,0 @@
-/* Linker script for the FPGA implementation of the V850E2 NA85E2C cpu core
-   (CONFIG_V850E2_FPGA85E2C).  */
-
-MEMORY {
-	/* Reset vector.  */
-	RESET	 : ORIGIN = 0, LENGTH = 0x10
-	/* Interrupt vectors.  */
-	INTV      : ORIGIN = 0x10, LENGTH = 0x470
-	/* The `window' in RAM were we're allowed to load stuff.  */
-	RAM_LOW   : ORIGIN = 0x480, LENGTH = 0x0005FB80
-	/* Some more ram above the window were we can put bss &c.  */
-	RAM_HIGH  : ORIGIN = 0x00060000, LENGTH = 0x000A0000
-	/* This is the area visible from the outside world (we can use
-	   this only for uninitialized data).  */
-	VISIBLE   : ORIGIN = 0x00200000, LENGTH = 0x00060000
-}
-
-SECTIONS {
-	.reset : {
-		__kram_start = . ;
-		__intv_start = . ;
-	        	*(.intv.reset)	/* Reset vector */
-	} > RESET
-
-	.ram_low : {
-		__r0_ram = . ;		/* Must be near address 0.  */
-		. = . + 32 ;
-
-		TEXT_CONTENTS
-		DATA_CONTENTS
-		ROOT_FS_CONTENTS
-		RAMK_INIT_CONTENTS_NO_END
-		INITRAMFS_CONTENTS
-	} > RAM_LOW
-
-        /* Where the interrupt vectors are initially loaded.  */
-	__intv_load_start = . ;
-
-	.intv : {
-			*(.intv.common)	/* Vectors common to all v850e proc. */
-			*(.intv.mach)	/* Machine-specific int. vectors.  */
-		__intv_end = . ;
-	} > INTV  AT> RAM_LOW
-
-	.ram_high : {
-		/* This is here so that when we free init memory the
-		   load-time copy of the interrupt vectors and any empty
-		   space at the end of the `RAM_LOW' area is freed too.  */
-		. = ALIGN (4096);
-		__init_end = . ;
-
-		BSS_CONTENTS
-		__kram_end = . ;
-		BOOTMAP_CONTENTS
-	} > RAM_HIGH
-
-	.visible : {
-		_memcons_output = . ;
-		. = . + 0x8000 ;
-		_memcons_output_end = . ;
-	} > VISIBLE
-}
diff --git a/arch/v850/kernel/gbus_int.c b/arch/v850/kernel/gbus_int.c
deleted file mode 100644
index b2bcc251f65b..000000000000
--- a/arch/v850/kernel/gbus_int.c
+++ /dev/null
@@ -1,271 +0,0 @@
-/*
- * arch/v850/kernel/gbus_int.c -- Midas labs GBUS interrupt support
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/signal.h>
-#include <linux/kernel.h>
-
-#include <asm/machdep.h>
-
-
-/* The number of shared GINT interrupts. */
-#define NUM_GINTS   	4
-
-/* For each GINT interrupt, how many GBUS interrupts are using it.  */
-static unsigned gint_num_active_irqs[NUM_GINTS] = { 0 };
-
-/* A table of GINTn interrupts we actually use.
-   Note that we don't use GINT0 because all the boards we support treat it
-   specially.  */
-struct used_gint {
-	unsigned gint;
-	unsigned priority;
-} used_gint[] = {
-	{ 1, GBUS_INT_PRIORITY_HIGH },
-	{ 3, GBUS_INT_PRIORITY_LOW }
-};
-#define NUM_USED_GINTS ARRAY_SIZE(used_gint)
-
-/* A table of which GINT is used by each GBUS interrupts (they are
-   assigned based on priority).  */
-static unsigned char gbus_int_gint[IRQ_GBUS_INT_NUM];
-
-
-/* Interrupt enabling/disabling.  */
-
-/* Enable interrupt handling for interrupt IRQ.  */
-void gbus_int_enable_irq (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-	GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
-		|= GBUS_INT_IRQ_MASK (irq);
-}
-
-/* Disable interrupt handling for interrupt IRQ.  Note that any
-   interrupts received while disabled will be delivered once the
-   interrupt is enabled again, unless they are explicitly cleared using
-   `gbus_int_clear_pending_irq'.  */
-void gbus_int_disable_irq (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-	GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
-		&= ~GBUS_INT_IRQ_MASK (irq);
-}
-
-/* Return true if interrupt handling for interrupt IRQ is enabled.  */
-int gbus_int_irq_enabled (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-	return (GBUS_INT_ENABLE (GBUS_INT_IRQ_WORD(irq), gint)
-		& GBUS_INT_IRQ_MASK(irq));
-}
-
-/* Disable all GBUS irqs.  */
-void gbus_int_disable_irqs ()
-{
-	unsigned w, n;
-	for (w = 0; w < GBUS_INT_NUM_WORDS; w++)
-		for (n = 0; n < IRQ_GINT_NUM; n++)
-			GBUS_INT_ENABLE (w, n) = 0;
-}
-
-/* Clear any pending interrupts for IRQ.  */
-void gbus_int_clear_pending_irq (unsigned irq)
-{
-	GBUS_INT_CLEAR (GBUS_INT_IRQ_WORD(irq)) = GBUS_INT_IRQ_MASK (irq);
-}
-
-/* Return true if interrupt IRQ is pending (but disabled).  */
-int gbus_int_irq_pending (unsigned irq)
-{
-	return (GBUS_INT_STATUS (GBUS_INT_IRQ_WORD(irq))
-		& GBUS_INT_IRQ_MASK(irq));
-}
-
-
-/* Delegating interrupts.  */
-
-/* Handle a shared GINT interrupt by passing to the appropriate GBUS
-   interrupt handler.  */
-static irqreturn_t gbus_int_handle_irq (int irq, void *dev_id,
-					struct pt_regs *regs)
-{
-	unsigned w;
-	irqreturn_t rval = IRQ_NONE;
-	unsigned gint = irq - IRQ_GINT (0);
-
-	for (w = 0; w < GBUS_INT_NUM_WORDS; w++) {
-		unsigned status = GBUS_INT_STATUS (w);
-		unsigned enable = GBUS_INT_ENABLE (w, gint);
-
-		/* Only pay attention to enabled interrupts.  */
-		status &= enable;
-		if (status) {
-			irq = IRQ_GBUS_INT (w * GBUS_INT_BITS_PER_WORD);
-			do {
-				/* There's an active interrupt in word
-				   W, find out which one, and call its
-				   handler.  */
-
-				while (! (status & 0x1)) {
-					irq++;
-					status >>= 1;
-				}
-				status &= ~0x1;
-
-				/* Recursively call handle_irq to handle it. */
-				handle_irq (irq, regs);
-				rval = IRQ_HANDLED;
-			} while (status);
-		}
-	}
-
-	/* Toggle the `all enable' bit back and forth, which should cause
-	   another edge transition if there are any other interrupts
-	   still pending, and so result in another CPU interrupt.  */
-	GBUS_INT_ENABLE (0, gint) &= ~0x1;
-	GBUS_INT_ENABLE (0, gint) |=  0x1;
-
-	return rval;
-}
-
-
-/* Initialize GBUS interrupt sources.  */
-
-static void irq_nop (unsigned irq) { }
-
-static unsigned gbus_int_startup_irq (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-
-	if (gint_num_active_irqs[gint] == 0) {
-		/* First enable the CPU interrupt.  */
-		int rval =
-			request_irq (IRQ_GINT(gint), gbus_int_handle_irq,
-				     IRQF_DISABLED,
-				     "gbus_int_handler",
-				     &gint_num_active_irqs[gint]);
-		if (rval != 0)
-			return rval;
-	}
-
-	gint_num_active_irqs[gint]++;
-
-	gbus_int_clear_pending_irq (irq);
-	gbus_int_enable_irq (irq);
-
-	return 0;
-}
-
-static void gbus_int_shutdown_irq (unsigned irq)
-{
-	unsigned gint = gbus_int_gint[irq - GBUS_INT_BASE_IRQ];
-
-	gbus_int_disable_irq (irq);
-
-	if (--gint_num_active_irqs[gint] == 0)
-		/* Disable the CPU interrupt.  */
-		free_irq (IRQ_GINT(gint), &gint_num_active_irqs[gint]);
-}
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-void __init gbus_int_init_irq_types (struct gbus_int_irq_init *inits,
-				     struct hw_interrupt_type *hw_irq_types)
-{
-	struct gbus_int_irq_init *init;
-	for (init = inits; init->name; init++) {
-		unsigned i;
-		struct hw_interrupt_type *hwit = hw_irq_types++;
-
-		hwit->typename = init->name;
-
-		hwit->startup  = gbus_int_startup_irq;
-		hwit->shutdown = gbus_int_shutdown_irq;
-		hwit->enable   = gbus_int_enable_irq;
-		hwit->disable  = gbus_int_disable_irq;
-		hwit->ack      = irq_nop;
-		hwit->end      = irq_nop;
-		
-		/* Initialize kernel IRQ infrastructure for this interrupt.  */
-		init_irq_handlers(init->base, init->num, init->interval, hwit);
-
-		/* Set the interrupt priorities.  */
-		for (i = 0; i < init->num; i++) {
-			unsigned j;
-			for (j = 0; j < NUM_USED_GINTS; j++)
-				if (used_gint[j].priority > init->priority)
-					break;
-			/* Wherever we stopped looking is one past the
-			   GINT we want. */
-			gbus_int_gint[init->base + i * init->interval
-				      - GBUS_INT_BASE_IRQ]
-				= used_gint[j > 0 ? j - 1 : 0].gint;
-		}
-	}
-}
-
-
-/* Initialize IRQS.  */
-
-/* Chip interrupts (GINTn) shared among GBUS interrupts.  */
-static struct hw_interrupt_type gint_hw_itypes[NUM_USED_GINTS];
-
-
-/* GBUS interrupts themselves.  */
-
-struct gbus_int_irq_init gbus_irq_inits[] __initdata = {
-	/* First set defaults.  */
-	{ "GBUS_INT", IRQ_GBUS_INT(0), IRQ_GBUS_INT_NUM, 1, 6},
-	{ 0 }
-};
-#define NUM_GBUS_IRQ_INITS (ARRAY_SIZE(gbus_irq_inits) - 1)
-
-static struct hw_interrupt_type gbus_hw_itypes[NUM_GBUS_IRQ_INITS];
-
-
-/* Initialize GBUS interrupts.  */
-void __init gbus_int_init_irqs (void)
-{
-	unsigned i;
-
-	/* First initialize the shared gint interrupts.  */
-	for (i = 0; i < NUM_USED_GINTS; i++) {
-		unsigned gint = used_gint[i].gint;
-		struct v850e_intc_irq_init gint_irq_init[2];
-
-		/* We initialize one GINT interrupt at a time.  */
-		gint_irq_init[0].name = "GINT";
-		gint_irq_init[0].base = IRQ_GINT (gint);
-		gint_irq_init[0].num = 1;
-		gint_irq_init[0].interval = 1;
-		gint_irq_init[0].priority = used_gint[i].priority;
-
-		gint_irq_init[1].name = 0; /* Terminate the vector.  */
-
-		v850e_intc_init_irq_types (gint_irq_init, gint_hw_itypes);
-	}
-
-	/* Then the GBUS interrupts.  */
-	gbus_int_disable_irqs ();
-	gbus_int_init_irq_types (gbus_irq_inits, gbus_hw_itypes);
-	/* Turn on the `all enable' bits, which are ANDed with
-	   individual interrupt enable bits; we only want to bother with
-	   the latter.  They are the first bit in the first word of each
-	   interrupt-enable area.  */
-	for (i = 0; i < NUM_USED_GINTS; i++)
-		GBUS_INT_ENABLE (0, used_gint[i].gint) = 0x1;
-}
diff --git a/arch/v850/kernel/head.S b/arch/v850/kernel/head.S
deleted file mode 100644
index c490b937ef14..000000000000
--- a/arch/v850/kernel/head.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * arch/v850/kernel/head.S -- Lowest-level startup code
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/clinkage.h>
-#include <asm/current.h>
-#include <asm/entry.h>
-#include <asm/thread_info.h>
-#include <asm/irq.h>
-
-
-/* Make a slightly more convenient alias for C_SYMBOL_NAME.  */
-#define CSYM	C_SYMBOL_NAME
-
-
-	.text
-
-	// Define `mach_early_init' as a weak symbol
-	.global	CSYM(mach_early_init)
-	.weak	CSYM(mach_early_init)
-
-C_ENTRY(start):
-	// Make sure interrupts are turned off, just in case
-	di
-
-#ifdef CONFIG_RESET_GUARD
-	// See if we got here via an unexpected reset
-	ld.w	RESET_GUARD, r19	// Check current value of reset guard
-	mov	RESET_GUARD_ACTIVE, r20
-	cmp	r19, r20
-	bne	1f			// Guard was not active
-
-	// If we get here, the reset guard was active.  Load up some
-	// interesting values as arguments, and jump to the handler.
-	st.w	r0, RESET_GUARD		// Allow further resets to succeed
-	mov	lp, r6			// Arg 0: return address
-	ld.b	KM, r7			// Arg 1: kernel mode
-	mov	sp, r9			// Arg 3: stack pointer
-	ld.w	KSP, r19		// maybe switch to kernel stack
-	cmp	r7, r0			// see if already in kernel mode
-	cmov	z, r19, sp, sp		//  and switch to kernel stack if not
-	GET_CURRENT_TASK(r8)		// Arg 2: task pointer
-	jr	CSYM(unexpected_reset)
-
-1:	st.w	r20, RESET_GUARD	// Turn on reset guard
-#endif /* CONFIG_RESET_GUARD */
-
-	// Setup a temporary stack for doing pre-initialization function calls.
-	// 
-	// We can't use the initial kernel stack, because (1) it may be
-	// located in memory we're not allowed to touch, and (2) since
-	// it's in the data segment, calling memcpy to initialize that
-	// area from ROM will overwrite memcpy's return address.
-	mov	hilo(CSYM(_init_stack_end) - 4), sp
-
-	// See if there's a platform-specific early-initialization routine
-	// defined; it's a weak symbol, so it will have an address of zero if
-	// there's not.
-	mov	hilo(CSYM(mach_early_init)), r6
-	cmp	r6, r0
-	bz	3f
-
-	// There is one, so call it.  If this function is written in C, it
-	// should be very careful -- the stack pointer is valid, but very
-	// little else is (e.g., bss is not zeroed yet, and initialized data
-	// hasn't been).
-	jarl	2f, lp			// first figure out return address
-2:	add	3f - ., lp
-	jmp	[r6]			// do call
-3:
-
-#ifdef CONFIG_ROM_KERNEL
-	// Copy the data area from ROM to RAM
-	mov	hilo(CSYM(_rom_copy_dst_start)), r6
-	mov	hilo(CSYM(_rom_copy_src_start)), r7
-	mov	hilo(CSYM(_rom_copy_dst_end)), r8
-	sub	r6, r8
-	jarl	CSYM(memcpy), lp
-#endif
-
-	// Load the initial thread's stack, and current task pointer (in r16)
-	mov	hilo(CSYM(init_thread_union)), r19
-	movea	THREAD_SIZE, r19, sp
-	ld.w	TI_TASK[r19], CURRENT_TASK
-
-#ifdef CONFIG_TIME_BOOTUP
-	/* This stuff must come after mach_early_init, because interrupts may
-	   not work until after its been called.  */
-	jarl	CSYM(highres_timer_reset), lp
-	jarl	CSYM(highres_timer_start), lp
-#endif
-
-	// Kernel stack pointer save location
-	st.w	sp, KSP
-
-	// Assert that we're in `kernel mode'
-	mov	1, r19
-	st.w	r19, KM
-
-#ifdef CONFIG_ZERO_BSS
-	// Zero bss area, since we can't rely upon any loader to do so
-	mov	hilo(CSYM(_sbss)), r6
-	mov	r0, r7
-	mov	hilo(CSYM(_ebss)), r8
-	sub	r6, r8
-	jarl	CSYM(memset), lp
-#endif
-
-	// What happens if the main kernel function returns (it shouldn't)
-	mov	hilo(CSYM(machine_halt)), lp
-
-	// Start the linux kernel.  We use an indirect jump to get extra
-	// range, because on some platforms this initial startup code
-	// (and the associated platform-specific code in mach_early_init)
-	// are located far away from the main kernel, e.g. so that they
-	// can initialize RAM first and copy the kernel or something.
-	mov	hilo(CSYM(start_kernel)), r12
-	jmp	[r12]
-C_END(start)
diff --git a/arch/v850/kernel/highres_timer.c b/arch/v850/kernel/highres_timer.c
deleted file mode 100644
index b16ad1eaf966..000000000000
--- a/arch/v850/kernel/highres_timer.c
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * arch/v850/kernel/highres_timer.c -- High resolution timing routines
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/system.h>
-#include <asm/v850e_timer_d.h>
-#include <asm/highres_timer.h>
-
-#define HIGHRES_TIMER_USEC_SHIFT   12
-
-/* Pre-calculated constant used for converting ticks to real time
-   units.  We initialize it to prevent it being put into BSS.  */
-static u32 highres_timer_usec_prescale = 1;
-
-void highres_timer_slow_tick_irq (void) __attribute__ ((noreturn));
-void highres_timer_slow_tick_irq (void)
-{
-	/* This is an interrupt handler, so it must be very careful to
-	   not to trash any registers.  At this point, the stack-pointer
-	   (r3) has been saved in the chip ram location ENTRY_SP by the
-	   interrupt vector, so we can use it as a scratch register; we
-	   must also restore it before returning.  */
-	asm ("ld.w	%0[r0], sp;"
-	     "add	1, sp;"
-	     "st.w	sp, %0[r0];"
-	     "ld.w	%1[r0], sp;" /* restore pre-irq stack-pointer */
-	     "reti"
-	     ::
-	      "i" (HIGHRES_TIMER_SLOW_TICKS_ADDR),
-	      "i" (ENTRY_SP_ADDR)
-	     : "memory");
-}
-
-void highres_timer_reset (void)
-{
-	V850E_TIMER_D_TMD (HIGHRES_TIMER_TIMER_D_UNIT) = 0;
-	HIGHRES_TIMER_SLOW_TICKS = 0;
-}
-
-void highres_timer_start (void)
-{
-	u32 fast_tick_rate;
-
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (HIGHRES_TIMER_TIMER_D_UNIT,
-				 HIGHRES_TIMER_SLOW_TICK_RATE);
-
-	fast_tick_rate =
-		(V850E_TIMER_D_BASE_FREQ
-		 >> V850E_TIMER_D_DIVLOG2 (HIGHRES_TIMER_TIMER_D_UNIT));
-
-	/* The obvious way of calculating microseconds from fast ticks
-	   is to do:
-
-	     usec = fast_ticks * 10^6 / fast_tick_rate
-
-	   However, divisions are much slower than multiplications, and
-	   the above calculation can overflow, so we do this instead:
-
-	     usec = fast_ticks * (10^6 * 2^12 / fast_tick_rate) / 2^12
-
-           since we can pre-calculate (10^6 * (2^12 / fast_tick_rate))
-	   and use a shift for dividing by 2^12, this avoids division,
-	   and is almost as accurate (it differs by about 2 microseconds
-	   at the extreme value of the fast-tick counter's ranger).  */
-	highres_timer_usec_prescale = ((1000000 << HIGHRES_TIMER_USEC_SHIFT)
-				       / fast_tick_rate);
-
-	/* Enable the interrupt (which is hardwired to this use), and
-	   give it the highest priority.  */
-	V850E_INTC_IC (IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT)) = 0;
-}
-
-void highres_timer_stop (void)
-{
-	/* Stop the timer.  */
-	V850E_TIMER_D_TMCD (HIGHRES_TIMER_TIMER_D_UNIT) =
-		V850E_TIMER_D_TMCD_CAE;
-	/* Disable its interrupt, just in case.  */
-	v850e_intc_disable_irq (IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT));
-}
-
-inline void highres_timer_read_ticks (u32 *slow_ticks, u32 *fast_ticks)
-{
-	int flags;
-	u32 fast_ticks_1, fast_ticks_2, _slow_ticks;
-
-	local_irq_save (flags);
-	fast_ticks_1 = V850E_TIMER_D_TMD (HIGHRES_TIMER_TIMER_D_UNIT);
-	_slow_ticks = HIGHRES_TIMER_SLOW_TICKS;
-	fast_ticks_2 = V850E_TIMER_D_TMD (HIGHRES_TIMER_TIMER_D_UNIT);
-	local_irq_restore (flags);
-
-	if (fast_ticks_2 < fast_ticks_1)
-		_slow_ticks++;
-
-	*slow_ticks = _slow_ticks;
-	*fast_ticks = fast_ticks_2;
-}
-
-inline void highres_timer_ticks_to_timeval (u32 slow_ticks, u32 fast_ticks,
-					    struct timeval *tv)
-{
-	unsigned long sec, sec_rem, usec;
-
-	usec = ((fast_ticks * highres_timer_usec_prescale)
-		>> HIGHRES_TIMER_USEC_SHIFT);
-
-	sec = slow_ticks / HIGHRES_TIMER_SLOW_TICK_RATE;
-	sec_rem = slow_ticks % HIGHRES_TIMER_SLOW_TICK_RATE;
-
-	usec += sec_rem * (1000000 / HIGHRES_TIMER_SLOW_TICK_RATE);
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-void highres_timer_read (struct timeval *tv)
-{
-	u32 fast_ticks, slow_ticks;
-	highres_timer_read_ticks (&slow_ticks, &fast_ticks);
-	highres_timer_ticks_to_timeval (slow_ticks, fast_ticks, tv);
-}
diff --git a/arch/v850/kernel/init_task.c b/arch/v850/kernel/init_task.c
deleted file mode 100644
index 44b274dff33f..000000000000
--- a/arch/v850/kernel/init_task.c
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * arch/v850/kernel/init_task.c -- Initial task/thread structures
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/init_task.h>
-#include <linux/fs.h>
-#include <linux/mqueue.h>
-
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-
-static struct fs_struct init_fs = INIT_FS;
-static struct signal_struct init_signals = INIT_SIGNALS (init_signals);
-static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-struct mm_struct init_mm = INIT_MM (init_mm);
-
-EXPORT_SYMBOL(init_mm);
-
-/*
- * Initial task structure.
- *
- * All other task structs will be allocated on slabs in fork.c
- */
-struct task_struct init_task = INIT_TASK (init_task);
-
-EXPORT_SYMBOL(init_task);
-
-/*
- * Initial thread structure.
- *
- * We need to make sure that this is 8192-byte aligned due to the
- * way process stacks are handled. This is done by having a special
- * "init_task" linker map entry.
- */
-union thread_union init_thread_union 
-	__attribute__((__section__(".data.init_task"))) =
-		{ INIT_THREAD_INFO(init_task) };
diff --git a/arch/v850/kernel/intv.S b/arch/v850/kernel/intv.S
deleted file mode 100644
index 671e4c6150dd..000000000000
--- a/arch/v850/kernel/intv.S
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * arch/v850/kernel/intv.S -- Interrupt vectors
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/clinkage.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/entry.h>
-
-#ifdef CONFIG_V850E_HIGHRES_TIMER
-#include <asm/highres_timer.h>
-#endif
-
-/* Jump to an interrupt/trap handler.  These handlers (defined in entry.S)
-   expect the stack-pointer to be saved in ENTRY_SP, so we use sp to do an
-   indirect jump (which avoids problems when the handler is more than a signed
-   22-bit offset away).  */
-#define JUMP_TO_HANDLER(name, sp_save_loc)				      \
-	st.w	sp, sp_save_loc;					      \
-	mov	hilo(name), sp;						      \
-	jmp	[sp]
-
-
-	/* Reset vector.  */
-	.section	.intv.reset, "ax"
-	.org	0x0
-	mov	hilo(C_SYMBOL_NAME(start)), r1;
-	jmp	[r1]
-
-
-	/* Generic interrupt vectors.  */
-	.section	.intv.common, "ax"
-	.balign	0x10
-	JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP)	// 0x10 - NMI0
-	.balign	0x10
-	JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP)	// 0x20 - NMI1
-	.balign	0x10
-	JUMP_TO_HANDLER (nmi, NMI_ENTRY_SP)	// 0x30 - NMI2
-	
-	.balign	0x10
-	JUMP_TO_HANDLER (trap, ENTRY_SP)	// 0x40 - TRAP0n
-	.balign	0x10
-	JUMP_TO_HANDLER (trap, ENTRY_SP)	// 0x50 - TRAP1n
-
-	.balign	0x10
-	JUMP_TO_HANDLER (dbtrap, ENTRY_SP)	// 0x60 - Illegal op / DBTRAP insn
-
-
-	/* Hardware interrupt vectors.  */
-	.section	.intv.mach, "ax"
-	.org	0x0
-
-#if defined (CONFIG_V850E_HIGHRES_TIMER) && defined (IRQ_INTCMD)
-
-	/* Interrupts before the highres timer interrupt.  */
-	.rept	IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT)
-	.balign	0x10
-	JUMP_TO_HANDLER (irq, ENTRY_SP)
-	.endr
-
-	/* The highres timer interrupt.  */
-	.balign	0x10
-	JUMP_TO_HANDLER (C_SYMBOL_NAME (highres_timer_slow_tick_irq), ENTRY_SP)
-
-	/* Interrupts after the highres timer interrupt.  */
-	.rept	NUM_CPU_IRQS - IRQ_INTCMD (HIGHRES_TIMER_TIMER_D_UNIT) - 1
-	.balign	0x10
-	JUMP_TO_HANDLER (irq, ENTRY_SP)
-	.endr
-
-#else /* No highres timer */
-
-	.rept	NUM_CPU_IRQS
-	.balign	0x10
-	JUMP_TO_HANDLER (irq, ENTRY_SP)
-	.endr
-
-#endif /* Highres timer */
diff --git a/arch/v850/kernel/irq.c b/arch/v850/kernel/irq.c
deleted file mode 100644
index 858c45819aab..000000000000
--- a/arch/v850/kernel/irq.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * arch/v850/kernel/irq.c -- High-level interrupt handling
- *
- *  Copyright (C) 2001,02,03,04,05  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,04,05  Miles Bader <miles@gnu.org>
- *  Copyright (C) 1994-2000  Ralf Baechle
- *  Copyright (C) 1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * This file was was derived from the mips version, arch/mips/kernel/irq.c
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/irq.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/kernel_stat.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-#include <linux/random.h>
-#include <linux/seq_file.h>
-
-#include <asm/system.h>
-
-/*
- * 'what should we do if we get a hw irq event on an illegal vector'.
- * each architecture has to answer this themselves, it doesn't deserve
- * a generic callback i think.
- */
-void ack_bad_irq(unsigned int irq)
-{
-	printk("received IRQ %d with unknown interrupt type\n", irq);
-}
-
-volatile unsigned long irq_err_count, spurious_count;
-
-/*
- * Generic, controller-independent functions:
- */
-
-int show_interrupts(struct seq_file *p, void *v)
-{
-	int irq = *(loff_t *) v;
-
-	if (irq == 0) {
-		int cpu;
-		seq_puts(p, "           ");
-		for (cpu=0; cpu < 1 /*smp_num_cpus*/; cpu++)
-			seq_printf(p, "CPU%d       ", cpu);
-		seq_putc(p, '\n');
-	}
-
-	if (irq < NR_IRQS) {
-		unsigned long flags;
-		struct irqaction *action;
-
-		spin_lock_irqsave(&irq_desc[irq].lock, flags);
-
-		action = irq_desc[irq].action;
-		if (action) {
-			int j;
-			int count = 0;
-			int num = -1;
-			const char *type_name = irq_desc[irq].chip->typename;
-
-			for (j = 0; j < NR_IRQS; j++)
-				if (irq_desc[j].chip->typename == type_name){
-					if (irq == j)
-						num = count;
-					count++;
-				}
-
-			seq_printf(p, "%3d: ",irq);
-			seq_printf(p, "%10u ", kstat_irqs(irq));
-			if (count > 1) {
-				int prec = (num >= 100 ? 3 : num >= 10 ? 2 : 1);
-				seq_printf(p, " %*s%d", 14 - prec,
-					   type_name, num);
-			} else
-				seq_printf(p, " %14s", type_name);
-		
-			seq_printf(p, "  %s", action->name);
-			for (action=action->next; action; action = action->next)
-				seq_printf(p, ", %s", action->name);
-			seq_putc(p, '\n');
-		}
-
-		spin_unlock_irqrestore(&irq_desc[irq].lock, flags);
-	} else if (irq == NR_IRQS)
-		seq_printf(p, "ERR: %10lu\n", irq_err_count);
-
-	return 0;
-}
-
-/* Handle interrupt IRQ.  REGS are the registers at the time of ther
-   interrupt.  */
-unsigned int handle_irq (int irq, struct pt_regs *regs)
-{
-	irq_enter();
-	__do_IRQ(irq, regs);
-	irq_exit();
-	return 1;
-}
-
-/* Initialize irq handling for IRQs.
-   BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL
-   to IRQ_TYPE.  An IRQ_TYPE of 0 means to use a generic interrupt type.  */
-void __init
-init_irq_handlers (int base_irq, int num, int interval,
-		   struct hw_interrupt_type *irq_type)
-{
-	while (num-- > 0) {
-		irq_desc[base_irq].status  = IRQ_DISABLED;
-		irq_desc[base_irq].action  = NULL;
-		irq_desc[base_irq].depth   = 1;
-		irq_desc[base_irq].chip = irq_type;
-		base_irq += interval;
-	}
-}
diff --git a/arch/v850/kernel/ma.c b/arch/v850/kernel/ma.c
deleted file mode 100644
index 143774de75e1..000000000000
--- a/arch/v850/kernel/ma.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * arch/v850/kernel/ma.c -- V850E/MA series of cpu chips
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/v850e_timer_d.h>
-
-#include "mach.h"
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, 		NUM_MACH_IRQS,	1, 7 },
-	{ "CMD", IRQ_INTCMD(0), IRQ_INTCMD_NUM,	1, 5 },
-	{ "DMA", IRQ_INTDMA(0), IRQ_INTDMA_NUM,	1, 2 },
-	{ "CSI", IRQ_INTCSI(0), IRQ_INTCSI_NUM,	4, 4 },
-	{ "SER", IRQ_INTSER(0), IRQ_INTSER_NUM,	4, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM, 	4, 4 },
-	{ "ST",  IRQ_INTST(0), 	IRQ_INTST_NUM, 	4, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize MA chip interrupts.  */
-void __init ma_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-/* Called before configuring an on-chip UART.  */
-void ma_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* We only know about the first two UART channels (though
-	   specific chips may have more).  */
-	if (chan < 2) {
-		unsigned bits = 0x3 << (chan * 3);
-		/* Specify that the relevant pins on the chip should do
-		   serial I/O, not direct I/O.  */
-		MA_PORT4_PMC |= bits;
-		/* Specify that we're using the UART, not the CSI device.  */
-		MA_PORT4_PFC |= bits;
-	}
-}
diff --git a/arch/v850/kernel/mach.c b/arch/v850/kernel/mach.c
deleted file mode 100644
index b9db278d2b71..000000000000
--- a/arch/v850/kernel/mach.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/v850/kernel/mach.c -- Defaults for some things defined by "mach.h"
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include "mach.h"
-
-/* Called with each timer tick, if non-zero.  */
-void (*mach_tick)(void) = 0;
diff --git a/arch/v850/kernel/mach.h b/arch/v850/kernel/mach.h
deleted file mode 100644
index 9e0e4816ec56..000000000000
--- a/arch/v850/kernel/mach.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * arch/v850/kernel/mach.h -- Machine-dependent functions used by v850 port
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#ifndef __V850_MACH_H__
-#define __V850_MACH_H__
-
-#include <linux/kernel.h>
-#include <linux/time.h>
-#include <linux/spinlock.h>
-#include <linux/interrupt.h>
-#include <linux/fs.h>
-#include <linux/seq_file.h>
-
-#include <asm/ptrace.h>
-#include <asm/entry.h>
-#include <asm/clinkage.h>
-
-void mach_setup (char **cmdline);
-void mach_gettimeofday (struct timespec *tv);
-void mach_sched_init (struct irqaction *timer_action);
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len);
-void mach_init_irqs (void);
-
-/* If defined, is called very early in the kernel initialization.  The
-   stack pointer is valid, but very little has been initialized (e.g.,
-   bss is not zeroed yet) when this is called, so care must taken.  */
-void mach_early_init (void);
-
-/* If defined, called after the bootmem allocator has been initialized,
-   to allow the platform-dependent code to reserve any areas of RAM that
-   the kernel shouldn't touch.  */
-void mach_reserve_bootmem (void) __attribute__ ((__weak__));
-
-/* Called with each timer tick, if non-zero.  */
-extern void (*mach_tick) (void);
-
-/* The following establishes aliases for various mach_ functions to the
-   name by which the rest of the kernel calls them.  These statements
-   should only have an effect in the file that defines the actual functions. */
-#define MACH_ALIAS(to, from)						      \
-   asm (".global " macrology_stringify (C_SYMBOL_NAME (to)) ";"		      \
-	macrology_stringify (C_SYMBOL_NAME (to))			      \
-	" = " macrology_stringify (C_SYMBOL_NAME (from)))
-/* e.g.: MACH_ALIAS (kernel_name,	arch_spec_name);  */
-
-#endif /* __V850_MACH_H__ */
diff --git a/arch/v850/kernel/me2.c b/arch/v850/kernel/me2.c
deleted file mode 100644
index 007115dc9ce0..000000000000
--- a/arch/v850/kernel/me2.c
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * arch/v850/kernel/me2.c -- V850E/ME2 chip-specific support
- *
- *  Copyright (C) 2003  NEC Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/v850e_timer_d.h>
-
-#include "mach.h"
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ",    0,                NUM_CPU_IRQS,      1, 7 },
-	{ "INTP",   IRQ_INTP(0),      IRQ_INTP_NUM,      1, 5 },
-	{ "CMD",    IRQ_INTCMD(0),    IRQ_INTCMD_NUM,    1, 3 },
-	{ "UBTIRE", IRQ_INTUBTIRE(0), IRQ_INTUBTIRE_NUM, 5, 4 },
-	{ "UBTIR",  IRQ_INTUBTIR(0),  IRQ_INTUBTIR_NUM,  5, 4 },
-	{ "UBTIT",  IRQ_INTUBTIT(0),  IRQ_INTUBTIT_NUM,  5, 4 },
-	{ "UBTIF",  IRQ_INTUBTIF(0),  IRQ_INTUBTIF_NUM,  5, 4 },
-	{ "UBTITO", IRQ_INTUBTITO(0), IRQ_INTUBTITO_NUM, 5, 4 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize V850E/ME2 chip interrupts.  */
-void __init me2_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-/* Called before configuring an on-chip UART.  */
-void me2_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	if (chan == 0) {
-		/* Specify that the relevant pins on the chip should do
-		   serial I/O, not direct I/O.  */
-		ME2_PORT1_PMC |= 0xC;
-		/* Specify that we're using the UART, not the CSI device. */
-		ME2_PORT1_PFC |= 0xC;
-	} else if (chan == 1) {
-		/* Specify that the relevant pins on the chip should do
-		   serial I/O, not direct I/O.  */
-		ME2_PORT2_PMC |= 0x6;
-		/* Specify that we're using the UART, not the CSI device. */
-		ME2_PORT2_PFC |= 0x6;
-	}
-}
diff --git a/arch/v850/kernel/memcons.c b/arch/v850/kernel/memcons.c
deleted file mode 100644
index 92f514fdcc79..000000000000
--- a/arch/v850/kernel/memcons.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * arch/v850/kernel/memcons.c -- Console I/O to a memory buffer
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/init.h>
-
-/* If this device is enabled, the linker map should define start and
-   end points for its buffer. */
-extern char memcons_output[], memcons_output_end;
-
-/* Current offset into the buffer.  */
-static unsigned long memcons_offs = 0;
-
-/* Spinlock protecting memcons_offs.  */
-static DEFINE_SPINLOCK(memcons_lock);
-
-
-static size_t write (const char *buf, size_t len)
-{
-	unsigned long flags;
-	char *point;
-
-	spin_lock_irqsave (memcons_lock, flags);
-
-	point = memcons_output + memcons_offs;
-	if (point + len >= &memcons_output_end) {
-		len = &memcons_output_end - point;
-		memcons_offs = 0;
-	} else
-		memcons_offs += len;
-
-	spin_unlock_irqrestore (memcons_lock, flags);
-
-	memcpy (point, buf, len);
-
-	return len;
-}
-
-
-/*  Low-level console. */
-
-static void memcons_write (struct console *co, const char *buf, unsigned len)
-{
-	while (len > 0)
-		len -= write (buf, len);
-}
-
-static struct tty_driver *tty_driver;
-
-static struct tty_driver *memcons_device (struct console *co, int *index)
-{
-	*index = co->index;
-	return tty_driver;
-}
-
-static struct console memcons =
-{
-    .name	= "memcons",
-    .write	= memcons_write,
-    .device	= memcons_device,
-    .flags	= CON_PRINTBUFFER,
-    .index	= -1,
-};
-
-void memcons_setup (void)
-{
-	register_console (&memcons);
-	printk (KERN_INFO "Console: static memory buffer (memcons)\n");
-}
-
-/* Higher level TTY interface.  */
-
-int memcons_tty_open (struct tty_struct *tty, struct file *filp)
-{
-	return 0;
-}
-
-int memcons_tty_write (struct tty_struct *tty, const unsigned char *buf, int len)
-{
-	return write (buf, len);
-}
-
-int memcons_tty_write_room (struct tty_struct *tty)
-{
-	return &memcons_output_end - (memcons_output + memcons_offs);
-}
-
-int memcons_tty_chars_in_buffer (struct tty_struct *tty)
-{
-	/* We have no buffer.  */
-	return 0;
-}
-
-static const struct tty_operations ops = {
-	.open = memcons_tty_open,
-	.write = memcons_tty_write,
-	.write_room = memcons_tty_write_room,
-	.chars_in_buffer = memcons_tty_chars_in_buffer,
-};
-
-int __init memcons_tty_init (void)
-{
-	int err;
-	struct tty_driver *driver = alloc_tty_driver(1);
-	if (!driver)
-		return -ENOMEM;
-
-	driver->name = "memcons";
-	driver->major = TTY_MAJOR;
-	driver->minor_start = 64;
-	driver->type = TTY_DRIVER_TYPE_SYSCONS;
-	driver->init_termios = tty_std_termios;
-	tty_set_operations(driver, &ops);
-	err = tty_register_driver(driver);
-	if (err) {
-		put_tty_driver(driver);
-		return err;
-	}
-	tty_driver = driver;
-	return 0;
-}
-__initcall (memcons_tty_init);
diff --git a/arch/v850/kernel/module.c b/arch/v850/kernel/module.c
deleted file mode 100644
index 64aeb3e37c52..000000000000
--- a/arch/v850/kernel/module.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * arch/v850/kernel/module.c -- Architecture-specific module functions
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *  Copyright (C) 2001,03  Rusty Russell
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- *
- * Derived in part from arch/ppc/kernel/module.c
- */
-
-#include <linux/kernel.h>
-#include <linux/vmalloc.h>
-#include <linux/moduleloader.h>
-#include <linux/elf.h>
-
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(fmt , ...)
-#endif
-
-void *module_alloc (unsigned long size)
-{
-	return size == 0 ? 0 : vmalloc (size);
-}
-
-void module_free (struct module *mod, void *module_region)
-{
-	vfree (module_region);
-	/* FIXME: If module_region == mod->init_region, trim exception
-           table entries. */
-}
-
-int module_finalize (const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
-		     struct module *mod)
-{
-	return 0;
-}
-
-/* Count how many different relocations (different symbol, different
-   addend) */
-static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num)
-{
-	unsigned int i, j, ret = 0;
-
-	/* Sure, this is order(n^2), but it's usually short, and not
-           time critical */
-	for (i = 0; i < num; i++) {
-		for (j = 0; j < i; j++) {
-			/* If this addend appeared before, it's
-                           already been counted */
-			if (ELF32_R_SYM(rela[i].r_info)
-			    == ELF32_R_SYM(rela[j].r_info)
-			    && rela[i].r_addend == rela[j].r_addend)
-				break;
-		}
-		if (j == i) ret++;
-	}
-	return ret;
-}
-
-/* Get the potential trampolines size required of the init and
-   non-init sections */
-static unsigned long get_plt_size(const Elf32_Ehdr *hdr,
-				  const Elf32_Shdr *sechdrs,
-				  const char *secstrings,
-				  int is_init)
-{
-	unsigned long ret = 0;
-	unsigned i;
-
-	/* Everything marked ALLOC (this includes the exported
-           symbols) */
-	for (i = 1; i < hdr->e_shnum; i++) {
-		/* If it's called *.init*, and we're not init, we're
-                   not interested */
-		if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
-		    != is_init)
-			continue;
-
-		if (sechdrs[i].sh_type == SHT_RELA) {
-			DEBUGP("Found relocations in section %u\n", i);
-			DEBUGP("Ptr: %p.  Number: %u\n",
-			       (void *)hdr + sechdrs[i].sh_offset,
-			       sechdrs[i].sh_size / sizeof(Elf32_Rela));
-			ret += count_relocs((void *)hdr
-					     + sechdrs[i].sh_offset,
-					     sechdrs[i].sh_size
-					     / sizeof(Elf32_Rela))
-				* sizeof(struct v850_plt_entry);
-		}
-	}
-
-	return ret;
-}
-
-int module_frob_arch_sections(Elf32_Ehdr *hdr,
-			      Elf32_Shdr *sechdrs,
-			      char *secstrings,
-			      struct module *me)
-{
-	unsigned int i;
-
-	/* Find .plt and .pltinit sections */
-	for (i = 0; i < hdr->e_shnum; i++) {
-		if (strcmp(secstrings + sechdrs[i].sh_name, ".init.plt") == 0)
-			me->arch.init_plt_section = i;
-		else if (strcmp(secstrings + sechdrs[i].sh_name, ".plt") == 0)
-			me->arch.core_plt_section = i;
-	}
-	if (!me->arch.core_plt_section || !me->arch.init_plt_section) {
-		printk("Module doesn't contain .plt or .plt.init sections.\n");
-		return -ENOEXEC;
-	}
-
-	/* Override their sizes */
-	sechdrs[me->arch.core_plt_section].sh_size
-		= get_plt_size(hdr, sechdrs, secstrings, 0);
-	sechdrs[me->arch.init_plt_section].sh_size
-		= get_plt_size(hdr, sechdrs, secstrings, 1);
-	return 0;
-}
-
-int apply_relocate (Elf32_Shdr *sechdrs, const char *strtab,
-		    unsigned int symindex, unsigned int relsec,
-		    struct module *mod)
-{
-	printk ("Barf\n");
-	return -ENOEXEC;
-}
-
-/* Set up a trampoline in the PLT to bounce us to the distant function */
-static uint32_t do_plt_call (void *location, Elf32_Addr val,
-			     Elf32_Shdr *sechdrs, struct module *mod)
-{
-	struct v850_plt_entry *entry;
-	/* Instructions used to do the indirect jump.  */
-	uint32_t tramp[2];
-
-	/* We have to trash a register, so we assume that any control
-	   transfer more than 21-bits away must be a function call
-	   (so we can use a call-clobbered register).  */
-	tramp[0] = 0x0621 + ((val & 0xffff) << 16);   /* mov sym, r1 ... */
-	tramp[1] = ((val >> 16) & 0xffff) + 0x610000; /* ...; jmp r1 */
-
-	/* Init, or core PLT? */
-	if (location >= mod->module_core
-	    && location < mod->module_core + mod->core_size)
-		entry = (void *)sechdrs[mod->arch.core_plt_section].sh_addr;
-	else
-		entry = (void *)sechdrs[mod->arch.init_plt_section].sh_addr;
-
-	/* Find this entry, or if that fails, the next avail. entry */
-	while (entry->tramp[0])
-		if (entry->tramp[0] == tramp[0] && entry->tramp[1] == tramp[1])
-			return (uint32_t)entry;
-		else
-			entry++;
-
-	entry->tramp[0] = tramp[0];
-	entry->tramp[1] = tramp[1];
-
-	return (uint32_t)entry;
-}
-
-int apply_relocate_add (Elf32_Shdr *sechdrs, const char *strtab,
-			unsigned int symindex, unsigned int relsec,
-			struct module *mod)
-{
-	unsigned int i;
-	Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
-
-	DEBUGP ("Applying relocate section %u to %u\n", relsec,
-		sechdrs[relsec].sh_info);
-
-	for (i = 0; i < sechdrs[relsec].sh_size / sizeof (*rela); i++) {
-		/* This is where to make the change */
-		uint32_t *loc
-			= ((void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
-			   + rela[i].r_offset);
-		/* This is the symbol it is referring to.  Note that all
-		   undefined symbols have been resolved.  */
-		Elf32_Sym *sym
-			= ((Elf32_Sym *)sechdrs[symindex].sh_addr
-			   + ELF32_R_SYM (rela[i].r_info));
-		uint32_t val = sym->st_value + rela[i].r_addend;
-
-		switch (ELF32_R_TYPE (rela[i].r_info)) {
-		case R_V850_32:
-			/* We write two shorts instead of a long because even
-			   32-bit insns only need half-word alignment, but
-			   32-bit data writes need to be long-word aligned.  */
-			val += ((uint16_t *)loc)[0];
-			val += ((uint16_t *)loc)[1] << 16;
-			((uint16_t *)loc)[0] = val & 0xffff;
-			((uint16_t *)loc)[1] = (val >> 16) & 0xffff;
-			break;
-
-		case R_V850_22_PCREL:
-			/* Maybe jump indirectly via a PLT table entry.  */
-			if ((int32_t)(val - (uint32_t)loc) > 0x1fffff
-			    || (int32_t)(val - (uint32_t)loc) < -0x200000)
-				val = do_plt_call (loc, val, sechdrs, mod);
-
-			val -= (uint32_t)loc;
-
-			/* We write two shorts instead of a long because
-			   even 32-bit insns only need half-word alignment,
-			   but 32-bit data writes need to be long-word
-			   aligned.  */
-			((uint16_t *)loc)[0] =
-				(*(uint16_t *)loc & 0xffc0) /* opcode + reg */
-				| ((val >> 16) & 0xffc03f); /* offs high */
-			((uint16_t *)loc)[1] =
-				(val & 0xffff);		    /* offs low */
-			break;
-
-		default:
-			printk (KERN_ERR "module %s: Unknown reloc: %u\n",
-				mod->name, ELF32_R_TYPE (rela[i].r_info));
-			return -ENOEXEC;
-		}
-	}
-
-	return 0;
-}
-
-void
-module_arch_cleanup(struct module *mod)
-{
-}
diff --git a/arch/v850/kernel/process.c b/arch/v850/kernel/process.c
deleted file mode 100644
index e4a4b8e7d5a3..000000000000
--- a/arch/v850/kernel/process.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/*
- * arch/v850/kernel/process.c -- Arch-dependent process handling
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/reboot.h>
-
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-
-void (*pm_power_off)(void) = NULL;
-EXPORT_SYMBOL(pm_power_off);
-
-extern void ret_from_fork (void);
-
-
-/* The idle loop.  */
-static void default_idle (void)
-{
-	while (! need_resched ())
-		asm ("halt; nop; nop; nop; nop; nop" ::: "cc");
-}
-
-void (*idle)(void) = default_idle;
-
-/*
- * The idle thread. There's no useful work to be
- * done, so just try to conserve power and have a
- * low exit latency (ie sit in a loop waiting for
- * somebody to say that they'd like to reschedule)
- */
-void cpu_idle (void)
-{
-	/* endless idle loop with no priority at all */
-	while (1) {
-		while (!need_resched())
-			(*idle) ();
-
-		preempt_enable_no_resched();
-		schedule();
-		preempt_disable();
-	}
-}
-
-/*
- * This is the mechanism for creating a new kernel thread.
- *
- * NOTE! Only a kernel-only process (ie the swapper or direct descendants who
- * haven't done an "execve()") should use this: it will work within a system
- * call from a "real" process, but the process memory space will not be free'd
- * until both the parent and the child have exited.
- */
-int kernel_thread (int (*fn)(void *), void *arg, unsigned long flags)
-{
-	register mm_segment_t fs = get_fs ();
-	register unsigned long syscall asm (SYSCALL_NUM);
-	register unsigned long arg0 asm (SYSCALL_ARG0);
-	register unsigned long ret asm (SYSCALL_RET);
-
-	set_fs (KERNEL_DS);
-
-	/* Clone this thread.  Note that we don't pass the clone syscall's
-	   second argument -- it's ignored for calls from kernel mode (the
-	   child's SP is always set to the top of the kernel stack).  */
-	arg0 = flags | CLONE_VM;
-	syscall = __NR_clone;
-	asm volatile ("trap " SYSCALL_SHORT_TRAP
-		      : "=r" (ret), "=r" (syscall)
-		      : "1" (syscall), "r" (arg0)
-		      : SYSCALL_SHORT_CLOBBERS);
-
-	if (ret == 0) {
-		/* In child thread, call FN and exit.  */
-		arg0 = (*fn) (arg);
-		syscall = __NR_exit;
-		asm volatile ("trap " SYSCALL_SHORT_TRAP
-			      : "=r" (ret), "=r" (syscall)
-			      : "1" (syscall), "r" (arg0)
-			      : SYSCALL_SHORT_CLOBBERS);
-	}
-
-	/* In parent.  */
-	set_fs (fs);
-
-	return ret;
-}
-
-void flush_thread (void)
-{
-	set_fs (USER_DS);
-}
-
-int copy_thread (int nr, unsigned long clone_flags,
-		 unsigned long stack_start, unsigned long stack_size,
-		 struct task_struct *p, struct pt_regs *regs)
-{
-	/* Start pushing stuff from the top of the child's kernel stack.  */
-	unsigned long orig_ksp = task_tos(p);
-	unsigned long ksp = orig_ksp;
-	/* We push two `state save' stack fames (see entry.S) on the new
-	   kernel stack:
-	     1) The innermost one is what switch_thread would have
-	        pushed, and is used when we context switch to the child
-		thread for the first time.  It's set up to return to
-		ret_from_fork in entry.S.
-	     2) The outermost one (nearest the top) is what a syscall
-	        trap would have pushed, and is set up to return to the
-		same location as the parent thread, but with a return
-		value of 0. */
-	struct pt_regs *child_switch_regs, *child_trap_regs;
-
-	/* Trap frame.  */
-	ksp -= STATE_SAVE_SIZE;
-	child_trap_regs = (struct pt_regs *)(ksp + STATE_SAVE_PT_OFFSET);
-	/* Switch frame.  */
-	ksp -= STATE_SAVE_SIZE;
-	child_switch_regs = (struct pt_regs *)(ksp + STATE_SAVE_PT_OFFSET);
-
-	/* First copy parent's register state to child.  */
-	*child_switch_regs = *regs;
-	*child_trap_regs = *regs;
-
-	/* switch_thread returns to the restored value of the lp
-	   register (r31), so we make that the place where we want to
-	   jump when the child thread begins running.  */
-	child_switch_regs->gpr[GPR_LP] = (v850_reg_t)ret_from_fork;
-
-	if (regs->kernel_mode)
-		/* Since we're returning to kernel-mode, make sure the child's
-		   stored kernel stack pointer agrees with what the actual
-		   stack pointer will be at that point (the trap return code
-		   always restores the SP, even when returning to
-		   kernel-mode).  */
-		child_trap_regs->gpr[GPR_SP] = orig_ksp;
-	else
-		/* Set the child's user-mode stack-pointer (the name
-		   `stack_start' is a misnomer, it's just the initial SP
-		   value).  */
-		child_trap_regs->gpr[GPR_SP] = stack_start;
-
-	/* Thread state for the child (everything else is on the stack).  */
-	p->thread.ksp = ksp;
-
-	return 0;
-}
-
-/*
- * sys_execve() executes a new program.
- */
-int sys_execve (char *name, char **argv, char **envp, struct pt_regs *regs)
-{
-	char *filename = getname (name);
-	int error = PTR_ERR (filename);
-
-	if (! IS_ERR (filename)) {
-		error = do_execve (filename, argv, envp, regs);
-		putname (filename);
-	}
-
-	return error;
-}
-
-
-/*
- * These bracket the sleeping functions..
- */
-#define first_sched	((unsigned long)__sched_text_start)
-#define last_sched	((unsigned long)__sched_text_end)
-
-unsigned long get_wchan (struct task_struct *p)
-{
-#if 0  /* Barf.  Figure out the stack-layout later.  XXX  */
-	unsigned long fp, pc;
-	int count = 0;
-
-	if (!p || p == current || p->state == TASK_RUNNING)
-		return 0;
-
-	pc = thread_saved_pc (p);
-
-	/* This quite disgusting function walks up the stack, following
-	   saved return address, until it something that's out of bounds
-	   (as defined by `first_sched' and `last_sched').  It then
-	   returns the last PC that was in-bounds.  */
-	do {
-		if (fp < stack_page + sizeof (struct task_struct) ||
-		    fp >= 8184+stack_page)
-			return 0;
-		pc = ((unsigned long *)fp)[1];
-		if (pc < first_sched || pc >= last_sched)
-			return pc;
-		fp = *(unsigned long *) fp;
-	} while (count++ < 16);
-#endif
-
-	return 0;
-}
diff --git a/arch/v850/kernel/procfs.c b/arch/v850/kernel/procfs.c
deleted file mode 100644
index e433cde789b4..000000000000
--- a/arch/v850/kernel/procfs.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * arch/v850/kernel/procfs.c -- Introspection functions for /proc filesystem
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include "mach.h"
-
-static int cpuinfo_print (struct seq_file *m, void *v)
-{
-	extern unsigned long loops_per_jiffy;
-	
-	seq_printf (m, "CPU-Family:	v850\nCPU-Arch:	%s\n", CPU_ARCH);
-
-#ifdef CPU_MODEL_LONG
-	seq_printf (m, "CPU-Model:	%s (%s)\n", CPU_MODEL, CPU_MODEL_LONG);
-#else
-	seq_printf (m, "CPU-Model:	%s\n", CPU_MODEL);
-#endif
-
-#ifdef CPU_CLOCK_FREQ
-	seq_printf (m, "CPU-Clock:	%ld (%ld MHz)\n",
-		    (long)CPU_CLOCK_FREQ,
-		    (long)CPU_CLOCK_FREQ / 1000000);
-#endif
-
-	seq_printf (m, "BogoMips:	%lu.%02lu\n",
-		    loops_per_jiffy/(500000/HZ),
-		    (loops_per_jiffy/(5000/HZ)) % 100);
-
-#ifdef PLATFORM_LONG
-	seq_printf (m, "Platform:	%s (%s)\n", PLATFORM, PLATFORM_LONG);
-#elif defined (PLATFORM)
-	seq_printf (m, "Platform:	%s\n", PLATFORM);
-#endif
-
-	return 0;
-}
-
-static void *cpuinfo_start (struct seq_file *m, loff_t *pos)
-{
-	return *pos < NR_CPUS ? ((void *) 0x12345678) : NULL;
-}
-
-static void *cpuinfo_next (struct seq_file *m, void *v, loff_t *pos)
-{
-	++*pos;
-	return cpuinfo_start (m, pos);
-}
-
-static void cpuinfo_stop (struct seq_file *m, void *v)
-{
-}
-
-const struct seq_operations cpuinfo_op = {
-	.start	= cpuinfo_start,
-	.next	= cpuinfo_next,
-	.stop	= cpuinfo_stop,
-	.show	= cpuinfo_print
-};
diff --git a/arch/v850/kernel/ptrace.c b/arch/v850/kernel/ptrace.c
deleted file mode 100644
index a458ac941b25..000000000000
--- a/arch/v850/kernel/ptrace.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * arch/v850/kernel/ptrace.c -- `ptrace' system call
- *
- *  Copyright (C) 2002,03,04  NEC Electronics Corporation
- *  Copyright (C) 2002,03,04  Miles Bader <miles@gnu.org>
- *
- * Derived from arch/mips/kernel/ptrace.c:
- *
- *  Copyright (C) 1992 Ross Biro
- *  Copyright (C) Linus Torvalds
- *  Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle
- *  Copyright (C) 1996 David S. Miller
- *  Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
- *  Copyright (C) 1999 MIPS Technologies, Inc.
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/signal.h>
-
-#include <asm/errno.h>
-#include <asm/ptrace.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-
-/* Returns the address where the register at REG_OFFS in P is stashed away.  */
-static v850_reg_t *reg_save_addr (unsigned reg_offs, struct task_struct *t)
-{
-	struct pt_regs *regs;
-
-	/* Three basic cases:
-
-	   (1) A register normally saved before calling the scheduler, is
-	       available in the kernel entry pt_regs structure at the top
-	       of the kernel stack.  The kernel trap/irq exit path takes
-	       care to save/restore almost all registers for ptrace'd
-	       processes.
-
-	   (2) A call-clobbered register, where the process P entered the
-	       kernel via [syscall] trap, is not stored anywhere; that's
-	       OK, because such registers are not expected to be preserved
-	       when the trap returns anyway (so we don't actually bother to
-	       test for this case).
-
-	   (3) A few registers not used at all by the kernel, and so
-	       normally never saved except by context-switches, are in the
-	       context switch state.  */
-
-	if (reg_offs == PT_CTPC || reg_offs == PT_CTPSW || reg_offs == PT_CTBP)
-		/* Register saved during context switch.  */
-		regs = thread_saved_regs (t);
-	else
-		/* Register saved during kernel entry (or not available).  */
-		regs = task_pt_regs (t);
-
-	return (v850_reg_t *)((char *)regs + reg_offs);
-}
-
-/* Set the bits SET and clear the bits CLEAR in the v850e DIR
-   (`debug information register').  Returns the new value of DIR.  */
-static inline v850_reg_t set_dir (v850_reg_t set, v850_reg_t clear)
-{
-	register v850_reg_t rval asm ("r10");
-	register v850_reg_t arg0 asm ("r6") = set;
-	register v850_reg_t arg1 asm ("r7") = clear;
-
-	/* The dbtrap handler has exactly this functionality when called
-	   from kernel mode.  0xf840 is a `dbtrap' insn.  */
-	asm (".short 0xf840" : "=r" (rval) : "r" (arg0), "r" (arg1));
-
-	return rval;
-}
-
-/* Makes sure hardware single-stepping is (globally) enabled.
-   Returns true if successful.  */
-static inline int enable_single_stepping (void)
-{
-	static int enabled = 0;	/* Remember whether we already did it.  */
-	if (! enabled) {
-		/* Turn on the SE (`single-step enable') bit, 0x100, in the
-		   DIR (`debug information register').  This may fail if a
-		   processor doesn't support it or something.  We also try
-		   to clear bit 0x40 (`INI'), which is necessary to use the
-		   debug stuff on the v850e2; on the v850e, clearing 0x40
-		   shouldn't cause any problem.  */
-		v850_reg_t dir = set_dir (0x100, 0x40);
-		/* Make sure it really got set.  */
-		if (dir & 0x100)
-			enabled = 1;
-	}
-	return enabled;
-}
-
-/* Try to set CHILD's single-step flag to VAL.  Returns true if successful.  */
-static int set_single_step (struct task_struct *t, int val)
-{
-	v850_reg_t *psw_addr = reg_save_addr(PT_PSW, t);
-	if (val) {
-		/* Make sure single-stepping is enabled.  */
-		if (! enable_single_stepping ())
-			return 0;
-		/* Set T's single-step flag.  */
-		*psw_addr |= 0x800;
-	} else
-		*psw_addr &= ~0x800;
-	return 1;
-}
-
-long arch_ptrace(struct task_struct *child, long request, long addr, long data)
-{
-	int rval;
-
-	switch (request) {
-		unsigned long val;
-
-	case PTRACE_PEEKTEXT: /* read word at location addr. */
-	case PTRACE_PEEKDATA:
-		rval = generic_ptrace_peekdata(child, addr, data);
-		goto out;
-
-	case PTRACE_POKETEXT: /* write the word at location addr. */
-	case PTRACE_POKEDATA:
-		rval = generic_ptrace_pokedata(child, addr, data);
-		goto out;
-
-	/* Read/write the word at location ADDR in the registers.  */
-	case PTRACE_PEEKUSR:
-	case PTRACE_POKEUSR:
-		rval = 0;
-		if (addr >= PT_SIZE && request == PTRACE_PEEKUSR) {
-			/* Special requests that don't actually correspond
-			   to offsets in struct pt_regs.  */
-			if (addr == PT_TEXT_ADDR)
-				val = child->mm->start_code;
-			else if (addr == PT_DATA_ADDR)
-				val = child->mm->start_data;
-			else if (addr == PT_TEXT_LEN)
-				val = child->mm->end_code
-					- child->mm->start_code;
-			else
-				rval = -EIO;
-		} else if (addr >= 0 && addr < PT_SIZE && (addr & 0x3) == 0) {
-			v850_reg_t *reg_addr = reg_save_addr(addr, child);
-			if (request == PTRACE_PEEKUSR)
-				val = *reg_addr;
-			else
-				*reg_addr = data;
-		} else
-			rval = -EIO;
-
-		if (rval == 0 && request == PTRACE_PEEKUSR)
-			rval = put_user (val, (unsigned long *)data);
-		goto out;
-
-	/* Continue and stop at next (return from) syscall */
-	case PTRACE_SYSCALL:
-	/* Restart after a signal.  */
-	case PTRACE_CONT:
-	/* Execute a single instruction. */
-	case PTRACE_SINGLESTEP:
-		rval = -EIO;
-		if (!valid_signal(data))
-			break;
-
-		/* Turn CHILD's single-step flag on or off.  */
-		if (! set_single_step (child, request == PTRACE_SINGLESTEP))
-			break;
-
-		if (request == PTRACE_SYSCALL)
-			set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-		else
-			clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
-
-		child->exit_code = data;
-		wake_up_process(child);
-		rval = 0;
-		break;
-
-	/*
-	 * make the child exit.  Best I can do is send it a sigkill.
-	 * perhaps it should be put in the status that it wants to
-	 * exit.
-	 */
-	case PTRACE_KILL:
-		rval = 0;
-		if (child->exit_state == EXIT_ZOMBIE)	/* already dead */
-			break;
-		child->exit_code = SIGKILL;
-		wake_up_process(child);
-		break;
-
-	case PTRACE_DETACH: /* detach a process that was attached. */
-		set_single_step (child, 0);  /* Clear single-step flag */
-		rval = ptrace_detach(child, data);
-		break;
-
-	default:
-		rval = -EIO;
-		goto out;
-	}
- out:
-	return rval;
-}
-
-asmlinkage void syscall_trace(void)
-{
-	if (!test_thread_flag(TIF_SYSCALL_TRACE))
-		return;
-	if (!(current->ptrace & PT_PTRACED))
-		return;
-	/* The 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
-				 ? 0x80 : 0));
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-}
-
-void ptrace_disable (struct task_struct *child)
-{
-	/* nothing to do */
-}
diff --git a/arch/v850/kernel/rte_cb.c b/arch/v850/kernel/rte_cb.c
deleted file mode 100644
index 43018e1edebd..000000000000
--- a/arch/v850/kernel/rte_cb.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * include/asm-v850/rte_cb.c -- Midas lab RTE-CB series of evaluation boards
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-
-#include <asm/machdep.h>
-#include <asm/v850e_uart.h>
-
-#include "mach.h"
-
-static void led_tick (void);
-
-/* LED access routines.  */
-extern unsigned read_leds (int pos, char *buf, int len);
-extern unsigned write_leds (int pos, const char *buf, int len);
-
-#ifdef CONFIG_RTE_CB_MULTI
-extern void multi_init (void);
-#endif
-
-
-void __init rte_cb_early_init (void)
-{
-	v850e_intc_disable_irqs ();
-
-#ifdef CONFIG_RTE_CB_MULTI
-	multi_init ();
-#endif
-}
-
-void __init mach_setup (char **cmdline)
-{
-#ifdef CONFIG_RTE_MB_A_PCI
-	/* Probe for Mother-A, and print a message if we find it.  */
-	*(volatile unsigned long *)MB_A_SRAM_ADDR = 0xDEADBEEF;
-	if (*(volatile unsigned long *)MB_A_SRAM_ADDR == 0xDEADBEEF) {
-		*(volatile unsigned long *)MB_A_SRAM_ADDR = 0x12345678;
-		if (*(volatile unsigned long *)MB_A_SRAM_ADDR == 0x12345678)
-			printk (KERN_INFO
-				"          NEC SolutionGear/Midas lab"
-				" RTE-MOTHER-A motherboard\n");
-	}
-#endif /* CONFIG_RTE_MB_A_PCI */
-
-	mach_tick = led_tick;
-}
-
-void machine_restart (char *__unused)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-	asm ("jmp r0"); /* Jump to the reset vector.  */
-}
-
-/* This says `HALt.' in LEDese.  */
-static unsigned char halt_leds_msg[] = { 0x76, 0x77, 0x38, 0xF8 };
-
-void machine_halt (void)
-{
-#ifdef CONFIG_RESET_GUARD
-	disable_reset_guard ();
-#endif
-
-	/* Ignore all interrupts.  */
-	local_irq_disable ();
-
-	/* Write a little message.  */
-	write_leds (0, halt_leds_msg, sizeof halt_leds_msg);
-
-	/* Really halt.  */
-	for (;;)
-		asm ("halt; nop; nop; nop; nop; nop");
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
-
-/* Animated LED display for timer tick.  */
-
-#define TICK_UPD_FREQ	6
-static int tick_frames[][10] = {
-	{ 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, -1 },
-	{ 0x63, 0x5c, -1 },
-	{ 0x5c, 0x00, -1 },
-	{ 0x63, 0x00, -1 },
-	{ -1 }
-};
-
-static void led_tick ()
-{
-	static unsigned counter = 0;
-	
-	if (++counter == (HZ / TICK_UPD_FREQ)) {
-		/* Which frame we're currently displaying for each digit.  */
-		static unsigned frame_nums[LED_NUM_DIGITS] = { 0 };
-		/* Display image.  */
-		static unsigned char image[LED_NUM_DIGITS] = { 0 };
-		unsigned char prev_image[LED_NUM_DIGITS];
-		int write_to_leds = 1; /* true if we should actually display */
-		int digit;
-
-		/* We check to see if the physical LEDs contains what we last
-		   wrote to them; if not, we suppress display (this is so that
-		   users can write to the LEDs, and not have their output
-		   overwritten).  As a special case, we start writing again if
-		   all the LEDs are blank, or our display image is all zeros
-		   (indicating that this is the initial update, when the actual
-		   LEDs might contain random data).  */
-		read_leds (0, prev_image, LED_NUM_DIGITS);
-		for (digit = 0; digit < LED_NUM_DIGITS; digit++)
-			if (image[digit] != prev_image[digit]
-			    && image[digit] && prev_image[digit])
-			{
-				write_to_leds = 0;
-				break;
-			}
-
-		/* Update display image.  */
-		for (digit = 0;
-		     digit < LED_NUM_DIGITS && tick_frames[digit][0] >= 0;
-		     digit++)
-		{
-			int frame = tick_frames[digit][frame_nums[digit]];
-			if (frame < 0) {
-				image[digit] = tick_frames[digit][0];
-				frame_nums[digit] = 1;
-			} else {
-				image[digit] = frame;
-				frame_nums[digit]++;
-				break;
-			}
-		}
-
-		if (write_to_leds)
-			/* Write the display image to the physical LEDs.  */
-			write_leds (0, image, LED_NUM_DIGITS);
-
-		counter = 0;
-	}
-}
-
-
-/* Mother-A interrupts.  */
-
-#ifdef CONFIG_RTE_GBUS_INT
-
-#define L GBUS_INT_PRIORITY_LOW
-#define M GBUS_INT_PRIORITY_MEDIUM
-#define H GBUS_INT_PRIORITY_HIGH
-
-static struct gbus_int_irq_init gbus_irq_inits[] = {
-#ifdef CONFIG_RTE_MB_A_PCI
-	{ "MB_A_LAN",	IRQ_MB_A_LAN,		1,		     1, L },
-	{ "MB_A_PCI1",	IRQ_MB_A_PCI1(0),	IRQ_MB_A_PCI1_NUM,   1, L },
-	{ "MB_A_PCI2",	IRQ_MB_A_PCI2(0),	IRQ_MB_A_PCI2_NUM,   1, L },
-	{ "MB_A_EXT",	IRQ_MB_A_EXT(0),	IRQ_MB_A_EXT_NUM,    1, L },
-	{ "MB_A_USB_OC",IRQ_MB_A_USB_OC(0),	IRQ_MB_A_USB_OC_NUM, 1, L },
-	{ "MB_A_PCMCIA_OC",IRQ_MB_A_PCMCIA_OC,	1,		     1, L },
-#endif
-	{ 0 }
-};
-#define NUM_GBUS_IRQ_INITS (ARRAY_SIZE(gbus_irq_inits) - 1)
-
-static struct hw_interrupt_type gbus_hw_itypes[NUM_GBUS_IRQ_INITS];
-
-#endif /* CONFIG_RTE_GBUS_INT */
-
-
-void __init rte_cb_init_irqs (void)
-{
-#ifdef CONFIG_RTE_GBUS_INT
-	gbus_int_init_irqs ();
-	gbus_int_init_irq_types (gbus_irq_inits, gbus_hw_itypes);
-#endif /* CONFIG_RTE_GBUS_INT */
-}
diff --git a/arch/v850/kernel/rte_cb_leds.c b/arch/v850/kernel/rte_cb_leds.c
deleted file mode 100644
index aa47ab1dcd87..000000000000
--- a/arch/v850/kernel/rte_cb_leds.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * include/asm-v850/rte_cb_leds.c -- Midas lab RTE-CB board LED device support
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-
-#include <asm/uaccess.h>
-
-#define LEDS_MINOR	169	/* Minor device number, using misc major.  */
-
-/* The actual LED hardware is write-only, so we hold the contents here too.  */
-static unsigned char leds_image[LED_NUM_DIGITS] = { 0 };
-
-/* Spinlock protecting the above leds.  */
-static DEFINE_SPINLOCK(leds_lock);
-
-/* Common body of LED read/write functions, checks POS and LEN for
-   correctness, declares a variable using IMG_DECL, initialized pointing at
-   the POS position in the LED image buffer, and and iterates COPY_EXPR
-   until BUF is equal to the last buffer position; finally, sets LEN to be
-   the amount actually copied.  IMG should be a variable declaration
-   (without an initializer or a terminating semicolon); POS, BUF, and LEN
-   should all be simple variables.  */
-#define DO_LED_COPY(img_decl, pos, buf, len, copy_expr)			\
-do {									\
-	if (pos > LED_NUM_DIGITS)					\
-		len = 0;						\
-	else {								\
-		if (pos + len > LED_NUM_DIGITS)				\
-			len = LED_NUM_DIGITS - pos;			\
-									\
-		if (len > 0) {						\
-			unsigned long _flags;				\
-			const char *_end = buf + len;			\
-			img_decl = &leds_image[pos];			\
-									\
-			spin_lock_irqsave (leds_lock, _flags);		\
-			do						\
-				(copy_expr);				\
-			while (buf != _end);				\
-			spin_unlock_irqrestore (leds_lock, _flags);	\
-		}							\
-	}								\
-} while (0)
-
-/* Read LEN bytes from LEDs at position POS, into BUF.
-   Returns actual amount read.  */
-unsigned read_leds (unsigned pos, char *buf, unsigned len)
-{
-	DO_LED_COPY (const char *img, pos, buf, len, *buf++ = *img++);
-	return len;
-}
-
-/* Write LEN bytes to LEDs at position POS, from BUF.
-   Returns actual amount written.  */
-unsigned write_leds (unsigned pos, const char *buf, unsigned len)
-{
-	/* We write the actual LED values backwards, because
-	   increasing memory addresses reflect LEDs right-to-left. */
-	volatile char *led = &LED (LED_NUM_DIGITS - pos - 1);
-	/* We invert the value written to the hardware, because 1 = off,
-	   and 0 = on.  */
-	DO_LED_COPY (char *img, pos, buf, len,
-		     *led-- = 0xFF ^ (*img++ = *buf++));
-	return len;
-}
-
-
-/* Device functions.  */
-
-static ssize_t leds_dev_read (struct file *file, char *buf, size_t len,
-			      loff_t *pos)
-{
-	char temp_buf[LED_NUM_DIGITS];
-	len = read_leds (*pos, temp_buf, len);
-	if (copy_to_user (buf, temp_buf, len))
-		return -EFAULT;
-	*pos += len;
-	return len;
-}
-
-static ssize_t leds_dev_write (struct file *file, const char *buf, size_t len,
-			       loff_t *pos)
-{
-	char temp_buf[LED_NUM_DIGITS];
-	if (copy_from_user (temp_buf, buf, min_t(size_t, len, LED_NUM_DIGITS)))
-		return -EFAULT;
-	len = write_leds (*pos, temp_buf, len);
-	*pos += len;
-	return len;
-}
-
-static loff_t leds_dev_lseek (struct file *file, loff_t offs, int whence)
-{
-	if (whence == 1)
-		offs += file->f_pos; /* relative */
-	else if (whence == 2)
-		offs += LED_NUM_DIGITS; /* end-relative */
-
-	if (offs < 0 || offs > LED_NUM_DIGITS)
-		return -EINVAL;
-
-	file->f_pos = offs;
-
-	return 0;
-}
-
-static const struct file_operations leds_fops = {
-	.read		= leds_dev_read,
-	.write		= leds_dev_write,
-	.llseek		= leds_dev_lseek
-};
-
-static struct miscdevice leds_miscdev = {
-	.name		= "leds",
-	.minor		= LEDS_MINOR,
-	.fops		= &leds_fops
-};
-
-int __init leds_dev_init (void)
-{
-	return misc_register (&leds_miscdev);
-}
-
-__initcall (leds_dev_init);
diff --git a/arch/v850/kernel/rte_cb_multi.c b/arch/v850/kernel/rte_cb_multi.c
deleted file mode 100644
index 963d55ab34cc..000000000000
--- a/arch/v850/kernel/rte_cb_multi.c
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * include/asm-v850/rte_multi.c -- Support for Multi debugger monitor ROM
- * 	on Midas lab RTE-CB series of evaluation boards
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/init.h>
-
-#include <asm/machdep.h>
-
-#define IRQ_ADDR(irq) (0x80 + (irq) * 0x10)
-
-/* A table of which interrupt vectors to install, since blindly
-   installing all of them makes the debugger stop working.  This is a
-   list of offsets in the interrupt vector area; each entry means to
-   copy that particular 16-byte vector.  An entry less than zero ends
-   the table.  */
-static long multi_intv_install_table[] = {
-	/* Trap vectors */
-	0x40, 0x50,		
-
-#ifdef CONFIG_RTE_CB_MULTI_DBTRAP
-	/* Illegal insn / dbtrap.  These are used by multi, so only handle
-	   them if configured to do so.  */
-	0x60,
-#endif
-
-	/* GINT1 - GINT3 (note, not GINT0!) */
-	IRQ_ADDR (IRQ_GINT(1)),
-	IRQ_ADDR (IRQ_GINT(2)),
-	IRQ_ADDR (IRQ_GINT(3)),
-
-	/* Timer D interrupts (up to 4 timers) */
-	IRQ_ADDR (IRQ_INTCMD(0)),
-#if IRQ_INTCMD_NUM > 1
-	IRQ_ADDR (IRQ_INTCMD(1)),
-#if IRQ_INTCMD_NUM > 2
-	IRQ_ADDR (IRQ_INTCMD(2)),
-#if IRQ_INTCMD_NUM > 3
-	IRQ_ADDR (IRQ_INTCMD(3)),
-#endif
-#endif
-#endif
-	
-	/* UART interrupts (up to 3 channels) */
-	IRQ_ADDR (IRQ_INTSER (0)), /* err */
-	IRQ_ADDR (IRQ_INTSR  (0)), /* rx */
-	IRQ_ADDR (IRQ_INTST  (0)), /* tx */
-#if IRQ_INTSR_NUM > 1
-	IRQ_ADDR (IRQ_INTSER (1)), /* err */
-	IRQ_ADDR (IRQ_INTSR  (1)), /* rx */
-	IRQ_ADDR (IRQ_INTST  (1)), /* tx */
-#if IRQ_INTSR_NUM > 2
-	IRQ_ADDR (IRQ_INTSER (2)), /* err */
-	IRQ_ADDR (IRQ_INTSR  (2)), /* rx */
-	IRQ_ADDR (IRQ_INTST  (2)), /* tx */
-#endif
-#endif
-
-	-1
-};
-
-/* Early initialization for kernel using Multi debugger ROM monitor.  */
-void __init multi_init (void)
-{
-	/* We're using the Multi debugger monitor, so we have to install
-	   the interrupt vectors.  The monitor doesn't allow them to be
-	   initially downloaded into their final destination because
-	   it's in the monitor's scratch-RAM area.  Unfortunately, Multi
-	   also doesn't deal correctly with ELF sections where the LMA
-	   and VMA differ -- it just ignores the LMA -- so we can't use
-	   that feature to work around the problem.  What we do instead
-	   is just put the interrupt vectors into a normal section, and
-	   do the necessary copying and relocation here.  Since the
-	   interrupt vector basically only contains `jr' instructions
-	   and no-ops, it's not that hard.  */
-	extern unsigned long _intv_load_start, _intv_start;
-	register unsigned long *src = &_intv_load_start;
-	register unsigned long *dst = (unsigned long *)INTV_BASE;
-	register unsigned long jr_fixup = (char *)&_intv_start - (char *)dst;
-	register long *ii;
-
-	/* Copy interrupt vectors as instructed by multi_intv_install_table. */
-	for (ii = multi_intv_install_table; *ii >= 0; ii++) {
-		/* Copy 16-byte interrupt vector at offset *ii.  */
-		int boffs;
-		for (boffs = 0; boffs < 0x10; boffs += sizeof *src) {
-			/* Copy a single word, fixing up the jump offs
-			   if it's a `jr' instruction.  */
-			int woffs = (*ii + boffs) / sizeof *src;
-			unsigned long word = src[woffs];
-
-			if ((word & 0xFC0) == 0x780) {
-				/* A `jr' insn, fix up its offset (and yes, the
-				   weird half-word swapping is intentional). */
-				unsigned short hi = word & 0xFFFF;
-				unsigned short lo = word >> 16;
-				unsigned long udisp22
-					= lo + ((hi & 0x3F) << 16);
-				long disp22 = (long)(udisp22 << 10) >> 10;
-
-				disp22 += jr_fixup;
-
-				hi = ((disp22 >> 16) & 0x3F) | 0x780;
-				lo = disp22 & 0xFFFF;
-
-				word = hi + (lo << 16);
-			}
-
-			dst[woffs] = word;
-		}
-	}
-}
diff --git a/arch/v850/kernel/rte_ma1_cb-rom.ld b/arch/v850/kernel/rte_ma1_cb-rom.ld
deleted file mode 100644
index 87b618f8253b..000000000000
--- a/arch/v850/kernel/rte_ma1_cb-rom.ld
+++ /dev/null
@@ -1,14 +0,0 @@
-/* Linker script for the Midas labs RTE-V850E/MA1-CB evaluation board
-   (CONFIG_RTE_CB_MA1), with kernel in ROM.  */
-
-MEMORY {
-	ROM   : ORIGIN = 0x00000000, LENGTH = 0x00100000
-	/* 1MB of SRAM.  This memory is mirrored 4 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 32MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	ROMK_SECTIONS(ROM, SRAM)
-}
diff --git a/arch/v850/kernel/rte_ma1_cb.c b/arch/v850/kernel/rte_ma1_cb.c
deleted file mode 100644
index 08abf3d5f8df..000000000000
--- a/arch/v850/kernel/rte_ma1_cb.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * arch/v850/kernel/rte_ma1_cb.c -- Midas labs RTE-V850E/MA1-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/ma1.h>
-#include <asm/rte_ma1_cb.h>
-#include <asm/v850e_timer_c.h>
-
-#include "mach.h"
-
-
-/* SRAM and SDRAM are almost contiguous (with a small hole in between;
-   see mach_reserve_bootmem for details), so just use both as one big area.  */
-#define RAM_START 	SRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-
-void __init mach_early_init (void)
-{
-	rte_cb_early_init ();
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_reserve_bootmem ()
-{
-#ifdef CONFIG_RTE_CB_MULTI
-	/* Prevent the kernel from touching the monitor's scratch RAM.  */
-	reserve_bootmem(MON_SCRATCH_ADDR, MON_SCRATCH_SIZE,
-			BOOTMEM_DEFAULT);
-#endif
-
-	/* The space between SRAM and SDRAM is filled with duplicate
-	   images of SRAM.  Prevent the kernel from using them.  */
-	reserve_bootmem (SRAM_ADDR + SRAM_SIZE,
-			 SDRAM_ADDR - (SRAM_ADDR + SRAM_SIZE),
-			 BOOTMEM_DEFAULT);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-/* Called before configuring an on-chip UART.  */
-void rte_ma1_cb_uart_pre_configure (unsigned chan,
-				    unsigned cflags, unsigned baud)
-{
-	/* The RTE-MA1-CB connects some general-purpose I/O pins on the
-	   CPU to the RTS/CTS lines of UART 0's serial connection.
-	   I/O pins P42 and P43 are RTS and CTS respectively.  */
-	if (chan == 0) {
-		/* Put P42 & P43 in I/O port mode.  */
-		MA_PORT4_PMC &= ~0xC;
-		/* Make P42 an output, and P43 an input.  */
-		MA_PORT4_PM = (MA_PORT4_PM & ~0xC) | 0x8;
-	}
-
-	/* Do pre-configuration for the actual UART.  */
-	ma_uart_pre_configure (chan, cflags, baud);
-}
-
-void __init mach_init_irqs (void)
-{
-	unsigned tc;
-
-	/* Initialize interrupts.  */
-	ma_init_irqs ();
-	rte_cb_init_irqs ();
-
-	/* Use falling-edge-sensitivity for interrupts .  */
-	V850E_TIMER_C_SESC (0) &= ~0xC;
-	V850E_TIMER_C_SESC (1) &= ~0xF;
-
-	/* INTP000-INTP011 are shared with `Timer C', so we have to set
-	   up Timer C to pass them through as raw interrupts.  */
-	for (tc = 0; tc < 2; tc++)
-		/* Turn on the timer.  */
-		V850E_TIMER_C_TMCC0 (tc) |= V850E_TIMER_C_TMCC0_CAE;
-
-	/* Make sure the relevant port0/port1 pins are assigned
-	   interrupt duty.  We used INTP001-INTP011 (don't screw with
-	   INTP000 because the monitor uses it).  */
-	MA_PORT0_PMC |= 0x4;	/* P02 (INTP001) in IRQ mode.  */
-	MA_PORT1_PMC |= 0x6;	/* P11 (INTP010) & P12 (INTP011) in IRQ mode.*/
-}
diff --git a/arch/v850/kernel/rte_ma1_cb.ld b/arch/v850/kernel/rte_ma1_cb.ld
deleted file mode 100644
index c8e16d16be41..000000000000
--- a/arch/v850/kernel/rte_ma1_cb.ld
+++ /dev/null
@@ -1,57 +0,0 @@
-/* Linker script for the Midas labs RTE-V850E/MA1-CB evaluation board
-   (CONFIG_RTE_CB_MA1), with kernel in SDRAM, under Multi debugger.  */
-
-MEMORY {
-	/* 1MB of SRAM; we can't use the last 32KB, because it's used by
-	   the monitor scratch-RAM.  This memory is mirrored 4 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = (SRAM_SIZE - MON_SCRATCH_SIZE)
-	/* Monitor scratch RAM; only the interrupt vectors should go here.  */
-	MRAM  : ORIGIN = MON_SCRATCH_ADDR,  LENGTH = MON_SCRATCH_SIZE
-	/* 32MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#ifdef CONFIG_RTE_CB_MA1_KSRAM
-# define KRAM SRAM
-#else
-# define KRAM SDRAM
-#endif
-
-SECTIONS {
-	/* We can't use RAMK_KRAM_CONTENTS because that puts the whole
-	   kernel in a single ELF segment, and the Multi debugger (which
-	   we use to load the kernel) appears to have bizarre problems
-	   dealing with it.  */
-
-	.text : {
-		__kram_start = . ;
-		TEXT_CONTENTS
-	} > KRAM
-
-	.data : {
-		DATA_CONTENTS
-		BSS_CONTENTS
-		RAMK_INIT_CONTENTS
-		__kram_end = . ;
-		BOOTMAP_CONTENTS
-
-		/* The address at which the interrupt vectors are initially
-		   loaded by the loader.  We can't load the interrupt vectors
-		   directly into their target location, because the monitor
-		   ROM for the GHS Multi debugger barfs if we try.
-		   Unfortunately, Multi also doesn't deal correctly with ELF
-		   sections where the LMA and VMA differ (it just ignores the
-		   LMA), so we can't use that feature to work around the
-		   problem!  What we do instead is just put the interrupt
-		   vectors into a normal section, and have the
-		   `mach_early_init' function for Midas boards do the
-		   necessary copying and relocation at runtime (this section
-		   basically only contains `jr' instructions, so it's not
-		   that hard).  */
-		. = ALIGN (0x10) ;
-		__intv_load_start = . ;
-		INTV_CONTENTS
-	} > KRAM
-
-	.root ALIGN (4096) : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/rte_mb_a_pci.c b/arch/v850/kernel/rte_mb_a_pci.c
deleted file mode 100644
index 687e367d8b64..000000000000
--- a/arch/v850/kernel/rte_mb_a_pci.c
+++ /dev/null
@@ -1,819 +0,0 @@
-/*
- * arch/v850/kernel/mb_a_pci.c -- PCI support for Midas lab RTE-MOTHER-A board
- *
- *  Copyright (C) 2001,02,03,05  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/pci.h>
-
-#include <asm/machdep.h>
-
-/* __nomods_init is like __devinit, but is a no-op when modules are enabled.
-   This is used by some routines that can be called either during boot
-   or by a module.  */
-#ifdef CONFIG_MODULES
-#define __nomods_init /*nothing*/
-#else
-#define __nomods_init __devinit
-#endif
-
-/* PCI devices on the Mother-A board can only do DMA to/from the MB SRAM
-   (the RTE-V850E/MA1-CB cpu board doesn't support PCI access to
-   CPU-board memory), and since linux DMA buffers are allocated in
-   normal kernel memory, we basically have to copy DMA blocks around
-   (this is like a `bounce buffer').  When a DMA block is `mapped', we
-   allocate an identically sized block in MB SRAM, and if we're doing
-   output to the device, copy the CPU-memory block to the MB-SRAM block.
-   When an active block is `unmapped', we will copy the block back to
-   CPU memory if necessary, and then deallocate the MB SRAM block.
-   Ack.  */
-
-/* Where the motherboard SRAM is in the PCI-bus address space (the
-   first 512K of it is also mapped at PCI address 0).  */
-#define PCI_MB_SRAM_ADDR 0x800000
-
-/* Convert CPU-view MB SRAM address to/from PCI-view addresses of the
-   same memory.  */
-#define MB_SRAM_TO_PCI(mb_sram_addr) \
-   ((dma_addr_t)mb_sram_addr - MB_A_SRAM_ADDR + PCI_MB_SRAM_ADDR)
-#define PCI_TO_MB_SRAM(pci_addr)     \
-   (void *)(pci_addr - PCI_MB_SRAM_ADDR + MB_A_SRAM_ADDR)
-
-static void pcibios_assign_resources (void);
-
-struct mb_pci_dev_irq {
-	unsigned dev;		/* PCI device number */
-	unsigned irq_base;	/* First IRQ  */
-	unsigned query_pin;	/* True if we should read the device's
-				   Interrupt Pin info, and allocate
-				   interrupt IRQ_BASE + PIN.  */
-};
-
-/* PCI interrupts are mapped statically to GBUS interrupts.  */
-static struct mb_pci_dev_irq mb_pci_dev_irqs[] = {
-	/* Motherboard SB82558 ethernet controller */
-	{ 10,	IRQ_MB_A_LAN,		0 },
-	/* PCI slot 1 */
-	{ 8, 	IRQ_MB_A_PCI1(0),	1 },
-	/* PCI slot 2 */
-	{ 9, 	IRQ_MB_A_PCI2(0),	1 }
-};
-#define NUM_MB_PCI_DEV_IRQS ARRAY_SIZE(mb_pci_dev_irqs)
-
-
-/* PCI configuration primitives.  */
-
-#define CONFIG_DMCFGA(bus, devfn, offs)					\
-   (0x80000000								\
-    | ((offs) & ~0x3)							\
-    | ((devfn) << 8)							\
-    | ((bus)->number << 16))
-
-static int
-mb_pci_read (struct pci_bus *bus, unsigned devfn, int offs, int size, u32 *rval)
-{
-	u32 addr;
-	int flags;
-
-	local_irq_save (flags);
-
-	MB_A_PCI_PCICR = 0x7;
-	MB_A_PCI_DMCFGA = CONFIG_DMCFGA (bus, devfn, offs);
-
-	addr = MB_A_PCI_IO_ADDR + (offs & 0x3);
-
-	switch (size) {
-	case 1:	*rval = *(volatile  u8 *)addr; break;
-	case 2:	*rval = *(volatile u16 *)addr; break;
-	case 4:	*rval = *(volatile u32 *)addr; break;
-	}
-
-        if (MB_A_PCI_PCISR & 0x2000) {
-		MB_A_PCI_PCISR = 0x2000;
-		*rval = ~0;
-        }
-
-	MB_A_PCI_DMCFGA = 0;
-
-	local_irq_restore (flags);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static int
-mb_pci_write (struct pci_bus *bus, unsigned devfn, int offs, int size, u32 val)
-{
-	u32 addr;
-	int flags;
-
-	local_irq_save (flags);
-
-	MB_A_PCI_PCICR = 0x7;
-	MB_A_PCI_DMCFGA = CONFIG_DMCFGA (bus, devfn, offs);
-
-	addr = MB_A_PCI_IO_ADDR + (offs & 0x3);
-
-	switch (size) {
-	case 1: *(volatile  u8 *)addr = val; break;
-	case 2: *(volatile u16 *)addr = val; break;
-	case 4: *(volatile u32 *)addr = val; break;
-	}
-
-        if (MB_A_PCI_PCISR & 0x2000)
-		MB_A_PCI_PCISR = 0x2000;
-
-	MB_A_PCI_DMCFGA = 0;
-
-	local_irq_restore (flags);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops mb_pci_config_ops = {
-	.read	= mb_pci_read,
-	.write	= mb_pci_write,
-};
-
-
-/* PCI Initialization.  */
-
-static struct pci_bus *mb_pci_bus = 0;
-
-/* Do initial PCI setup.  */
-static int __devinit pcibios_init (void)
-{
-	u32 id = MB_A_PCI_PCIHIDR;
-	u16 vendor = id & 0xFFFF;
-	u16 device = (id >> 16) & 0xFFFF;
-
-	if (vendor == PCI_VENDOR_ID_PLX && device == PCI_DEVICE_ID_PLX_9080) {
-		printk (KERN_INFO
-			"PCI: PLX Technology PCI9080 HOST/PCI bridge\n");
-
-		MB_A_PCI_PCICR = 0x147;
-
-		MB_A_PCI_PCIBAR0 = 0x007FFF00;
-		MB_A_PCI_PCIBAR1 = 0x0000FF00;
-		MB_A_PCI_PCIBAR2 = 0x00800000;
-
-		MB_A_PCI_PCILTR = 0x20;
-
-		MB_A_PCI_PCIPBAM |= 0x3;
-
-		MB_A_PCI_PCISR =  ~0; /* Clear errors.  */
-
-		/* Reprogram the motherboard's IO/config address space,
-		   as we don't support the GCS7 address space that the
-		   default uses.  */
-
-		/* Significant address bits used for decoding PCI GCS5 space
-		   accesses.  */
-		MB_A_PCI_DMRR = ~(MB_A_PCI_MEM_SIZE - 1);
-
-		/* I don't understand this, but the SolutionGear example code
-		   uses such an offset, and it doesn't work without it.  XXX */
-#if GCS5_SIZE == 0x00800000
-#define GCS5_CFG_OFFS 0x00800000
-#else
-#define GCS5_CFG_OFFS 0
-#endif
-
-		/* Address bit values for matching.  Note that we have to give
-		   the address from the motherboard's point of view, which is
-		   different than the CPU's.  */
-		/* PCI memory space.  */
-		MB_A_PCI_DMLBAM = GCS5_CFG_OFFS + 0x0;
-		/* PCI I/O space.  */
-		MB_A_PCI_DMLBAI =
-			GCS5_CFG_OFFS + (MB_A_PCI_IO_ADDR - GCS5_ADDR);
-
-		mb_pci_bus = pci_scan_bus (0, &mb_pci_config_ops, 0);
-
-		pcibios_assign_resources ();
-	} else
-		printk (KERN_ERR "PCI: HOST/PCI bridge not found\n");
-
-	return 0;
-}
-
-subsys_initcall (pcibios_init);
-
-char __devinit *pcibios_setup (char *option)
-{
-	/* Don't handle any options. */
-	return option;
-}
-
-
-int __nomods_init pcibios_enable_device (struct pci_dev *dev, int mask)
-{
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx = 0; idx < 6; idx++) {
-		r = &dev->resource[idx];
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available because "
-			       "of resource collisions\n", pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
-}
-
-
-/* Resource allocation.  */
-static void __devinit pcibios_assign_resources (void)
-{
-	struct pci_dev *dev = NULL;
-	struct resource *r;
-
-	for_each_pci_dev(dev) {
-		unsigned di_num;
-		unsigned class = dev->class >> 8;
-
-		if (class && class != PCI_CLASS_BRIDGE_HOST) {
-			unsigned r_num;
-			for(r_num = 0; r_num < 6; r_num++) {
-				r = &dev->resource[r_num];
-				if (!r->start && r->end)
-					pci_assign_resource (dev, r_num);
-			}
-		}
-
-		/* Assign interrupts.  */
-		for (di_num = 0; di_num < NUM_MB_PCI_DEV_IRQS; di_num++) {
-			struct mb_pci_dev_irq *di = &mb_pci_dev_irqs[di_num];
-
-			if (di->dev == PCI_SLOT (dev->devfn)) {
-				unsigned irq = di->irq_base;
-
-				if (di->query_pin) {
-					/* Find out which interrupt pin
-					   this device uses (each PCI
-					   slot has 4).  */
-					u8 irq_pin;
-
-					pci_read_config_byte (dev,
-							     PCI_INTERRUPT_PIN,
-							      &irq_pin);
-
-					if (irq_pin == 0)
-						/* Doesn't use interrupts.  */ 
-						continue;
-					else
-						irq += irq_pin - 1;
-				}
-
-				pcibios_update_irq (dev, irq);
-			}
-		}
-	}
-}
-
-void __devinit pcibios_update_irq (struct pci_dev *dev, int irq)
-{
-	dev->irq = irq;
-	pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq);
-}
-
-void __devinit
-pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
-			struct resource *res)
-{
-	unsigned long offset = 0;
-
-	if (res->flags & IORESOURCE_IO) {
-		offset = MB_A_PCI_IO_ADDR;
-	} else if (res->flags & IORESOURCE_MEM) {
-		offset = MB_A_PCI_MEM_ADDR;
-	}
-
-	region->start = res->start - offset;
-	region->end = res->end - offset;
-}
-
-
-/* Stubs for things we don't use.  */
-
-/* Called after each bus is probed, but before its children are examined. */
-void pcibios_fixup_bus(struct pci_bus *b)
-{
-}
-
-void
-pcibios_align_resource (void *data, struct resource *res,
-			resource_size_t size, resource_size_t align)
-{
-}
-
-void pcibios_set_master (struct pci_dev *dev)
-{
-}
-
-
-/* Mother-A SRAM memory allocation.  This is a simple first-fit allocator.  */
-
-/* A memory free-list node.  */
-struct mb_sram_free_area {
-	void *mem;
-	unsigned long size;
-	struct mb_sram_free_area *next;
-};
-
-/* The tail of the free-list, which starts out containing all the SRAM.  */
-static struct mb_sram_free_area mb_sram_free_tail = {
-	(void *)MB_A_SRAM_ADDR, MB_A_SRAM_SIZE, 0
-};
-
-/* The free-list.  */
-static struct mb_sram_free_area *mb_sram_free_areas = &mb_sram_free_tail;
-
-/* The free-list of free free-list nodes. (:-)  */
-static struct mb_sram_free_area *mb_sram_free_free_areas = 0;
-
-/* Spinlock protecting the above globals.  */
-static DEFINE_SPINLOCK(mb_sram_lock);
-
-/* Allocate a memory block at least SIZE bytes long in the Mother-A SRAM
-   space.  */
-static void *alloc_mb_sram (size_t size)
-{
-	struct mb_sram_free_area *prev, *fa;
-	unsigned long flags;
-	void *mem = 0;
-
-	spin_lock_irqsave (mb_sram_lock, flags);
-
-	/* Look for a free area that can contain SIZE bytes.  */
-	for (prev = 0, fa = mb_sram_free_areas; fa; prev = fa, fa = fa->next)
-		if (fa->size >= size) {
-			/* Found one!  */
-			mem = fa->mem;
-
-			if (fa->size == size) {
-				/* In fact, it fits exactly, so remove
-				   this node from the free-list.  */
-				if (prev)
-					prev->next = fa->next;
-				else
-					mb_sram_free_areas = fa->next;
-				/* Put it on the free-list-entry-free-list. */
-				fa->next = mb_sram_free_free_areas;
-				mb_sram_free_free_areas = fa;
-			} else {
-				/* FA is bigger than SIZE, so just
-				   reduce its size to account for this
-				   allocation.  */
-				fa->mem += size;
-				fa->size -= size;
-			}
-
-			break;
-		}
-
-	spin_unlock_irqrestore (mb_sram_lock, flags);
-
-	return mem;
-}
-
-/* Return the memory area MEM of size SIZE to the MB SRAM free pool.  */
-static void free_mb_sram (void *mem, size_t size)
-{
-	struct mb_sram_free_area *prev, *fa, *new_fa;
-	unsigned long flags;
-	void *end = mem + size;
-
-	spin_lock_irqsave (mb_sram_lock, flags);
-
- retry:
-	/* Find an adjacent free-list entry.  */
-	for (prev = 0, fa = mb_sram_free_areas; fa; prev = fa, fa = fa->next)
-		if (fa->mem == end) {
-			/* FA is just after MEM, grow down to encompass it. */
-			fa->mem = mem;
-			fa->size += size;
-			goto done;
-		} else if (fa->mem + fa->size == mem) {
-			struct mb_sram_free_area *next_fa = fa->next;
-
-			/* FA is just before MEM, expand to encompass it. */
-			fa->size += size;
-
-			/* See if FA can now be merged with its successor. */
-			if (next_fa && fa->mem + fa->size == next_fa->mem) {
-				/* Yup; merge NEXT_FA's info into FA.  */
-				fa->size += next_fa->size;
-				fa->next = next_fa->next;
-				/* Free NEXT_FA.  */
-				next_fa->next = mb_sram_free_free_areas;
-				mb_sram_free_free_areas = next_fa;
-			}
-			goto done;
-		} else if (fa->mem > mem)
-			/* We've reached the right spot in the free-list
-			   without finding an adjacent free-area, so add
-			   a new free area to hold mem. */
-			break;
-
-	/* Make a new free-list entry.  */
-
-	/* First, get a free-list entry.  */
-	if (! mb_sram_free_free_areas) {
-		/* There are none, so make some.  */
-		void *block;
-		size_t block_size = sizeof (struct mb_sram_free_area) * 8;
-
-		/* Don't hold the lock while calling kmalloc (I'm not
-		   sure whether it would be a problem, since we use
-		   GFP_ATOMIC, but it makes me nervous).  */
-		spin_unlock_irqrestore (mb_sram_lock, flags);
-
-		block = kmalloc (block_size, GFP_ATOMIC);
-		if (! block)
-			panic ("free_mb_sram: can't allocate free-list entry");
-
-		/* Now get the lock back.  */
-		spin_lock_irqsave (mb_sram_lock, flags);
-
-		/* Add the new free free-list entries.  */
-		while (block_size > 0) {
-			struct mb_sram_free_area *nfa = block;
-			nfa->next = mb_sram_free_free_areas;
-			mb_sram_free_free_areas = nfa;
-			block += sizeof *nfa;
-			block_size -= sizeof *nfa;
-		}
-
-		/* Since we dropped the lock to call kmalloc, the
-		   free-list could have changed, so retry from the
-		   beginning.  */
-		goto retry;
-	}
-
-	/* Remove NEW_FA from the free-list of free-list entries.  */
-	new_fa = mb_sram_free_free_areas;
-	mb_sram_free_free_areas = new_fa->next;
-
-	/* NEW_FA initially holds only MEM.  */
-	new_fa->mem = mem;
-	new_fa->size = size;
-
-	/* Insert NEW_FA in the free-list between PREV and FA. */
-	new_fa->next = fa;
-	if (prev)
-		prev->next = new_fa;
-	else
-		mb_sram_free_areas = new_fa;
-
- done:
-	spin_unlock_irqrestore (mb_sram_lock, flags);
-}
-
-
-/* Maintainence of CPU -> Mother-A DMA mappings.  */
-
-struct dma_mapping {
-	void *cpu_addr;
-	void *mb_sram_addr;
-	size_t size;
-	struct dma_mapping *next;
-};
-
-/* A list of mappings from CPU addresses to MB SRAM addresses for active
-   DMA blocks (that have been `granted' to the PCI device).  */
-static struct dma_mapping *active_dma_mappings = 0;
-
-/* A list of free mapping objects.  */
-static struct dma_mapping *free_dma_mappings = 0;
-
-/* Spinlock protecting the above globals.  */
-static DEFINE_SPINLOCK(dma_mappings_lock);
-
-static struct dma_mapping *new_dma_mapping (size_t size)
-{
-	unsigned long flags;
-	struct dma_mapping *mapping;
-	void *mb_sram_block = alloc_mb_sram (size);
-
-	if (! mb_sram_block)
-		return 0;
-
-	spin_lock_irqsave (dma_mappings_lock, flags);
-
-	if (! free_dma_mappings) {
-		/* We're out of mapping structures, make more.  */
-		void *mblock;
-		size_t mblock_size = sizeof (struct dma_mapping) * 8;
-
-		/* Don't hold the lock while calling kmalloc (I'm not
-		   sure whether it would be a problem, since we use
-		   GFP_ATOMIC, but it makes me nervous).  */
-		spin_unlock_irqrestore (dma_mappings_lock, flags);
-
-		mblock = kmalloc (mblock_size, GFP_ATOMIC);
-		if (! mblock) {
-			free_mb_sram (mb_sram_block, size);
-			return 0;
-		}
-
-		/* Get the lock back.  */
-		spin_lock_irqsave (dma_mappings_lock, flags);
-
-		/* Add the new mapping structures to the free-list.  */
-		while (mblock_size > 0) {
-			struct dma_mapping *fm = mblock;
-			fm->next = free_dma_mappings;
-			free_dma_mappings = fm;
-			mblock += sizeof *fm;
-			mblock_size -= sizeof *fm;
-		}
-	}
-
-	/* Get a mapping struct from the freelist.  */
-	mapping = free_dma_mappings;
-	free_dma_mappings = mapping->next;
-
-	/* Initialize the mapping.  Other fields should be filled in by
-	   caller.  */
-	mapping->mb_sram_addr = mb_sram_block;
-	mapping->size = size;
-
-	/* Add it to the list of active mappings.  */
-	mapping->next = active_dma_mappings;
-	active_dma_mappings = mapping;
-
-	spin_unlock_irqrestore (dma_mappings_lock, flags);
-
-	return mapping;
-}
-
-static struct dma_mapping *find_dma_mapping (void *mb_sram_addr)
-{
-	unsigned long flags;
-	struct dma_mapping *mapping;
-
-	spin_lock_irqsave (dma_mappings_lock, flags);
-
-	for (mapping = active_dma_mappings; mapping; mapping = mapping->next)
-		if (mapping->mb_sram_addr == mb_sram_addr) {
-			spin_unlock_irqrestore (dma_mappings_lock, flags);
-			return mapping;
-		}
-
-	panic ("find_dma_mapping: unmapped PCI DMA addr 0x%x",
-	       MB_SRAM_TO_PCI (mb_sram_addr));
-}
-
-static struct dma_mapping *deactivate_dma_mapping (void *mb_sram_addr)
-{
-	unsigned long flags;
-	struct dma_mapping *mapping, *prev;
-
-	spin_lock_irqsave (dma_mappings_lock, flags);
-
-	for (prev = 0, mapping = active_dma_mappings;
-	     mapping;
-	     prev = mapping, mapping = mapping->next)
-	{
-		if (mapping->mb_sram_addr == mb_sram_addr) {
-			/* This is the MAPPING; deactivate it.  */
-			if (prev)
-				prev->next = mapping->next;
-			else
-				active_dma_mappings = mapping->next;
-
-			spin_unlock_irqrestore (dma_mappings_lock, flags);
-
-			return mapping;
-		}
-	}
-
-	panic ("deactivate_dma_mapping: unmapped PCI DMA addr 0x%x",
-	       MB_SRAM_TO_PCI (mb_sram_addr));
-}
-
-/* Return MAPPING to the freelist.  */
-static inline void
-free_dma_mapping (struct dma_mapping *mapping)
-{
-	unsigned long flags;
-
-	free_mb_sram (mapping->mb_sram_addr, mapping->size);
-
-	spin_lock_irqsave (dma_mappings_lock, flags);
-
-	mapping->next = free_dma_mappings;
-	free_dma_mappings = mapping;
-
-	spin_unlock_irqrestore (dma_mappings_lock, flags);
-}
-
-
-/* Single PCI DMA mappings.  */
-
-/* `Grant' to PDEV the memory block at CPU_ADDR, for doing DMA.  The
-   32-bit PCI bus mastering address to use is returned.  the device owns
-   this memory until either pci_unmap_single or pci_dma_sync_single is
-   performed.  */
-dma_addr_t
-pci_map_single (struct pci_dev *pdev, void *cpu_addr, size_t size, int dir)
-{
-	struct dma_mapping *mapping = new_dma_mapping (size);
-
-	if (! mapping)
-		return 0;
-
-	mapping->cpu_addr = cpu_addr;
-
-	if (dir == PCI_DMA_BIDIRECTIONAL || dir == PCI_DMA_TODEVICE)
-		memcpy (mapping->mb_sram_addr, cpu_addr, size);
-
-	return MB_SRAM_TO_PCI (mapping->mb_sram_addr);
-}
-
-/* Return to the CPU the PCI DMA memory block previously `granted' to
-   PDEV, at DMA_ADDR.  */
-void pci_unmap_single (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-		       int dir)
-{
-	void *mb_sram_addr = PCI_TO_MB_SRAM (dma_addr);
-	struct dma_mapping *mapping = deactivate_dma_mapping (mb_sram_addr);
-
-	if (size != mapping->size)
-		panic ("pci_unmap_single: size (%d) doesn't match"
-		       " size of mapping at PCI DMA addr 0x%x (%d)\n",
-		       size, dma_addr, mapping->size);
-
-	/* Copy back the DMA'd contents if necessary.  */
-	if (dir == PCI_DMA_BIDIRECTIONAL || dir == PCI_DMA_FROMDEVICE)
-		memcpy (mapping->cpu_addr, mb_sram_addr, size);
-
-	/* Return mapping to the freelist.  */
-	free_dma_mapping (mapping);
-}
-
-/* Make physical memory consistent for a single streaming mode DMA
-   translation after a transfer.
-
-   If you perform a pci_map_single() but wish to interrogate the
-   buffer using the cpu, yet do not wish to teardown the PCI dma
-   mapping, you must call this function before doing so.  At the next
-   point you give the PCI dma address back to the card, you must first
-   perform a pci_dma_sync_for_device, and then the device again owns
-   the buffer.  */
-void
-pci_dma_sync_single_for_cpu (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-		     int dir)
-{
-	void *mb_sram_addr = PCI_TO_MB_SRAM (dma_addr);
-	struct dma_mapping *mapping = find_dma_mapping (mb_sram_addr);
-
-	/* Synchronize the DMA buffer with the CPU buffer if necessary.  */
-	if (dir == PCI_DMA_FROMDEVICE)
-		memcpy (mapping->cpu_addr, mb_sram_addr, size);
-	else if (dir == PCI_DMA_TODEVICE)
-		; /* nothing to do */
-	else
-		panic("pci_dma_sync_single: unsupported sync dir: %d", dir);
-}
-
-void
-pci_dma_sync_single_for_device (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
-				int dir)
-{
-	void *mb_sram_addr = PCI_TO_MB_SRAM (dma_addr);
-	struct dma_mapping *mapping = find_dma_mapping (mb_sram_addr);
-
-	/* Synchronize the DMA buffer with the CPU buffer if necessary.  */
-	if (dir == PCI_DMA_FROMDEVICE)
-		; /* nothing to do */
-	else if (dir == PCI_DMA_TODEVICE)
-		memcpy (mb_sram_addr, mapping->cpu_addr, size);
-	else
-		panic("pci_dma_sync_single: unsupported sync dir: %d", dir);
-}
-
-
-/* Scatter-gather PCI DMA mappings.  */
-
-/* Do multiple DMA mappings at once.  */
-int
-pci_map_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len, int dir)
-{
-	BUG ();
-	return 0;
-}
-
-/* Unmap multiple DMA mappings at once.  */
-void
-pci_unmap_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len,int dir)
-{
-	BUG ();
-}
-
-/* Make physical memory consistent for a set of streaming mode DMA
-   translations after a transfer.  The same as pci_dma_sync_single_* but
-   for a scatter-gather list, same rules and usage.  */
-
-void
-pci_dma_sync_sg_for_cpu (struct pci_dev *dev,
-			 struct scatterlist *sg, int sg_len,
-			 int dir)
-{
-	BUG ();
-}
-
-void
-pci_dma_sync_sg_for_device (struct pci_dev *dev,
-			    struct scatterlist *sg, int sg_len,
-			    int dir)
-{
-	BUG ();
-}
-
-
-/* PCI mem mapping.  */
-
-/* Allocate and map kernel buffer using consistent mode DMA for PCI
-   device.  Returns non-NULL cpu-view pointer to the buffer if
-   successful and sets *DMA_ADDR to the pci side dma address as well,
-   else DMA_ADDR is undefined.  */
-void *
-pci_alloc_consistent (struct pci_dev *pdev, size_t size, dma_addr_t *dma_addr)
-{
-	void *mb_sram_mem = alloc_mb_sram (size);
-	if (mb_sram_mem)
-		*dma_addr = MB_SRAM_TO_PCI (mb_sram_mem);
-	return mb_sram_mem;
-}
-
-/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
-   be values that were returned from pci_alloc_consistent.  SIZE must be
-   the same as what as passed into pci_alloc_consistent.  References to
-   the memory and mappings associated with CPU_ADDR or DMA_ADDR past
-   this call are illegal.  */
-void
-pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr,
-		     dma_addr_t dma_addr)
-{
-	void *mb_sram_mem = PCI_TO_MB_SRAM (dma_addr);
-	free_mb_sram (mb_sram_mem, size);
-}
-
-
-/* iomap/iomap */
-
-void __iomem *pci_iomap (struct pci_dev *dev, int bar, unsigned long max)
-{
-	resource_size_t start = pci_resource_start (dev, bar);
-	resource_size_t len = pci_resource_len (dev, bar);
-
-	if (!start || len == 0)
-		return 0;
-
-	/* None of the ioremap functions actually do anything, other than
-	   re-casting their argument, so don't bother differentiating them.  */
-	return ioremap (start, len);
-}
-
-void pci_iounmap (struct pci_dev *dev, void __iomem *addr)
-{
-	/* nothing */
-}
-
-
-/* symbol exports (for modules) */
-
-EXPORT_SYMBOL (pci_map_single);
-EXPORT_SYMBOL (pci_unmap_single);
-EXPORT_SYMBOL (pci_alloc_consistent);
-EXPORT_SYMBOL (pci_free_consistent);
-EXPORT_SYMBOL (pci_dma_sync_single_for_cpu);
-EXPORT_SYMBOL (pci_dma_sync_single_for_device);
-EXPORT_SYMBOL (pci_iomap);
-EXPORT_SYMBOL (pci_iounmap);
diff --git a/arch/v850/kernel/rte_me2_cb.c b/arch/v850/kernel/rte_me2_cb.c
deleted file mode 100644
index 46803d48dffe..000000000000
--- a/arch/v850/kernel/rte_me2_cb.c
+++ /dev/null
@@ -1,298 +0,0 @@
-/*
- * arch/v850/kernel/rte_me2_cb.c -- Midas labs RTE-V850E/ME2-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <linux/sched.h>
-#include <linux/delay.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/me2.h>
-#include <asm/rte_me2_cb.h>
-#include <asm/machdep.h>
-#include <asm/v850e_intc.h>
-#include <asm/v850e_cache.h>
-#include <asm/irq.h>
-
-#include "mach.h"
-
-extern unsigned long *_intv_start;
-extern unsigned long *_intv_end;
-
-/* LED access routines.  */
-extern unsigned read_leds (int pos, char *buf, int len);
-extern unsigned write_leds (int pos, const char *buf, int len);
-
-
-/* SDRAM are almost contiguous (with a small hole in between;
-   see mach_reserve_bootmem for details), so just use both as one big area.  */
-#define RAM_START 	SDRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-/* Called before configuring an on-chip UART.  */
-void rte_me2_cb_uart_pre_configure (unsigned chan,
-				    unsigned cflags, unsigned baud)
-{
-	/* The RTE-V850E/ME2-CB connects some general-purpose I/O
-	   pins on the CPU to the RTS/CTS lines of UARTB channel 0's
-	   serial connection.
-	   I/O pins P21 and P22 are RTS and CTS respectively.  */
-	if (chan == 0) {
-		/* Put P21 & P22 in I/O port mode.  */
-		ME2_PORT2_PMC &= ~0x6;
-		/* Make P21 and output, and P22 an input.  */
-		ME2_PORT2_PM = (ME2_PORT2_PM & ~0xC) | 0x4;
-	}
-
-	me2_uart_pre_configure (chan, cflags, baud);
-}
-
-void __init mach_init_irqs (void)
-{
-	/* Initialize interrupts.  */
-	me2_init_irqs ();
-	rte_me2_cb_init_irqs ();
-}
-
-#ifdef CONFIG_ROM_KERNEL
-/* Initialization for kernel in ROM.  */
-static inline rom_kernel_init (void)
-{
-	/* If the kernel is in ROM, we have to copy any initialized data
-	   from ROM into RAM.  */
-	extern unsigned long _data_load_start, _sdata, _edata;
-	register unsigned long *src = &_data_load_start;
-	register unsigned long *dst = &_sdata, *end = &_edata;
-
-	while (dst != end)
-		*dst++ = *src++;
-}
-#endif /* CONFIG_ROM_KERNEL */
-
-static void install_interrupt_vectors (void)
-{
-	unsigned long *p1, *p2;
-
-	ME2_IRAMM = 0x03; /* V850E/ME2 iRAM write mode */
-
-	/* vector copy to iRAM */
-	p1 = (unsigned long *)0; /* v85x vector start */
-	p2 = (unsigned long *)&_intv_start;
-	while (p2 < (unsigned long *)&_intv_end)
-		*p1++ = *p2++;
-
-	ME2_IRAMM = 0x00; /* V850E/ME2 iRAM read mode */
-}
-
-/* CompactFlash */
-
-static void cf_power_on (void)
-{
-	/* CF card detected? */
-	if (CB_CF_STS0 & 0x0030)
-		return;
-
-	CB_CF_REG0 = 0x0002; /* reest on */
-	mdelay (10);
-	CB_CF_REG0 = 0x0003; /* power on */
-	mdelay (10);
-	CB_CF_REG0 = 0x0001; /* reset off */
-	mdelay (10);
-}
-
-static void cf_power_off (void)
-{
-	CB_CF_REG0 = 0x0003; /* power on */
-	mdelay (10);
-	CB_CF_REG0 = 0x0002; /* reest on */
-	mdelay (10);
-}
-
-void __init mach_early_init (void)
-{
-	install_interrupt_vectors ();
-
-	/* CS1 SDRAM instruction cache enable */
-	v850e_cache_enable (0x04, 0x03, 0);
-
-	rte_cb_early_init ();
-
-	/* CompactFlash power on */
-	cf_power_on ();
-
-#if defined (CONFIG_ROM_KERNEL)
-	rom_kernel_init ();
-#endif
-}
-
-
-/* RTE-V850E/ME2-CB Programmable Interrupt Controller.  */
-
-static struct cb_pic_irq_init cb_pic_irq_inits[] = {
-	{ "CB_EXTTM0",       IRQ_CB_EXTTM0,       1, 1, 6 },
-	{ "CB_EXTSIO",       IRQ_CB_EXTSIO,       1, 1, 6 },
-	{ "CB_TOVER",        IRQ_CB_TOVER,        1, 1, 6 },
-	{ "CB_GINT0",        IRQ_CB_GINT0,        1, 1, 6 },
-	{ "CB_USB",          IRQ_CB_USB,          1, 1, 6 },
-	{ "CB_LANC",         IRQ_CB_LANC,         1, 1, 6 },
-	{ "CB_USB_VBUS_ON",  IRQ_CB_USB_VBUS_ON,  1, 1, 6 },
-	{ "CB_USB_VBUS_OFF", IRQ_CB_USB_VBUS_OFF, 1, 1, 6 },
-	{ "CB_EXTTM1",       IRQ_CB_EXTTM1,       1, 1, 6 },
-	{ "CB_EXTTM2",       IRQ_CB_EXTTM2,       1, 1, 6 },
-	{ 0 }
-};
-#define NUM_CB_PIC_IRQ_INITS (ARRAY_SIZE(cb_pic_irq_inits) - 1)
-
-static struct hw_interrupt_type cb_pic_hw_itypes[NUM_CB_PIC_IRQ_INITS];
-static unsigned char cb_pic_active_irqs = 0;
-
-void __init rte_me2_cb_init_irqs (void)
-{
-	cb_pic_init_irq_types (cb_pic_irq_inits, cb_pic_hw_itypes);
-
-	/* Initalize on board PIC1 (not PIC0) enable */
-	CB_PIC_INT0M  = 0x0000;
-	CB_PIC_INT1M  = 0x0000;
-	CB_PIC_INTR   = 0x0000;
-	CB_PIC_INTEN |= CB_PIC_INT1EN;
-
-	ME2_PORT2_PMC 	 |= 0x08;	/* INTP23/SCK1 mode */
-	ME2_PORT2_PFC 	 &= ~0x08;	/* INTP23 mode */
-	ME2_INTR(2) 	 &= ~0x08;	/* INTP23 falling-edge detect */
-	ME2_INTF(2) 	 &= ~0x08;	/*   " */
-
-	rte_cb_init_irqs ();	/* gbus &c */
-}
-
-
-/* Enable interrupt handling for interrupt IRQ.  */
-void cb_pic_enable_irq (unsigned irq)
-{
-	CB_PIC_INT1M |= 1 << (irq - CB_PIC_BASE_IRQ);
-}
-
-void cb_pic_disable_irq (unsigned irq)
-{
-	CB_PIC_INT1M &= ~(1 << (irq - CB_PIC_BASE_IRQ));
-}
-
-void cb_pic_shutdown_irq (unsigned irq)
-{
-	cb_pic_disable_irq (irq);
-
-	if (--cb_pic_active_irqs == 0)
-		free_irq (IRQ_CB_PIC, 0);
-
-	CB_PIC_INT1M &= ~(1 << (irq - CB_PIC_BASE_IRQ));
-}
-
-static irqreturn_t cb_pic_handle_irq (int irq, void *dev_id,
-				      struct pt_regs *regs)
-{
-	irqreturn_t rval = IRQ_NONE;
-	unsigned status = CB_PIC_INTR;
-	unsigned enable = CB_PIC_INT1M;
-
-	/* Only pay attention to enabled interrupts.  */
-	status &= enable;
-
-	CB_PIC_INTEN &= ~CB_PIC_INT1EN;
-
-	if (status) {
-		unsigned mask = 1;
-
-		irq = CB_PIC_BASE_IRQ;
-		do {
-			/* There's an active interrupt, find out which one,
-			   and call its handler.  */
-			while (! (status & mask)) {
-				irq++;
-				mask <<= 1;
-			}
-			status &= ~mask;
-
-			CB_PIC_INTR = mask;
-
-			/* Recursively call handle_irq to handle it. */
-			handle_irq (irq, regs);
-			rval = IRQ_HANDLED;
-		} while (status);
-	}
-
-	CB_PIC_INTEN |= CB_PIC_INT1EN;
-
-	return rval;
-}
-
-
-static void irq_nop (unsigned irq) { }
-
-static unsigned cb_pic_startup_irq (unsigned irq)
-{
-	int rval;
-
-	if (cb_pic_active_irqs == 0) {
-		rval = request_irq (IRQ_CB_PIC, cb_pic_handle_irq,
-				    IRQF_DISABLED, "cb_pic_handler", 0);
-		if (rval != 0)
-			return rval;
-	}
-
-	cb_pic_active_irqs++;
-
-	cb_pic_enable_irq (irq);
-
-	return 0;
-}
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-void __init cb_pic_init_irq_types (struct cb_pic_irq_init *inits,
-				   struct hw_interrupt_type *hw_irq_types)
-{
-	struct cb_pic_irq_init *init;
-	for (init = inits; init->name; init++) {
-		struct hw_interrupt_type *hwit = hw_irq_types++;
-
-		hwit->typename = init->name;
-
-		hwit->startup  = cb_pic_startup_irq;
-		hwit->shutdown = cb_pic_shutdown_irq;
-		hwit->enable   = cb_pic_enable_irq;
-		hwit->disable  = cb_pic_disable_irq;
-		hwit->ack      = irq_nop;
-		hwit->end      = irq_nop;
-
-		/* Initialize kernel IRQ infrastructure for this interrupt.  */
-		init_irq_handlers(init->base, init->num, init->interval, hwit);
-	}
-}
diff --git a/arch/v850/kernel/rte_me2_cb.ld b/arch/v850/kernel/rte_me2_cb.ld
deleted file mode 100644
index cf0766065ec6..000000000000
--- a/arch/v850/kernel/rte_me2_cb.ld
+++ /dev/null
@@ -1,30 +0,0 @@
-/* Linker script for the Midas labs RTE-V850E/ME2-CB evaluation board
-   (CONFIG_RTE_CB_ME2), with kernel in SDRAM.  */
-
-MEMORY {
-	/* 128Kbyte of IRAM */
-	IRAM : ORIGIN = 0x00000000, LENGTH = 0x00020000
-
-	/* 32MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#define KRAM SDRAM
-
-SECTIONS {
-	.text : {
-		__kram_start = . ;
-		TEXT_CONTENTS
-		INTV_CONTENTS	/* copy to iRAM (0x0-0x620) */
-	} > KRAM
-
-	.data : {
-		DATA_CONTENTS
-		BSS_CONTENTS
-		RAMK_INIT_CONTENTS
-		__kram_end = . ;
-		BOOTMAP_CONTENTS
-	} > KRAM
-	
-	.root ALIGN (4096) : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/rte_nb85e_cb-multi.ld b/arch/v850/kernel/rte_nb85e_cb-multi.ld
deleted file mode 100644
index de347b4fffac..000000000000
--- a/arch/v850/kernel/rte_nb85e_cb-multi.ld
+++ /dev/null
@@ -1,57 +0,0 @@
-/* Linker script for the Midas labs RTE-NB85E-CB evaluation board
-   (CONFIG_RTE_CB_NB85E), with the Multi debugger ROM monitor .  */
-
-MEMORY {
-	/* 1MB of SRAM; we can't use the last 96KB, because it's used by
-	   the monitor scratch-RAM.  This memory is mirrored 4 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = (SRAM_SIZE - MON_SCRATCH_SIZE)
-	/* Monitor scratch RAM; only the interrupt vectors should go here.  */
-	MRAM  : ORIGIN = MON_SCRATCH_ADDR,  LENGTH = MON_SCRATCH_SIZE
-	/* 16MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#ifdef CONFIG_RTE_CB_NB85E_KSRAM
-# define KRAM SRAM
-#else
-# define KRAM SDRAM
-#endif
-
-SECTIONS {
-	/* We can't use RAMK_KRAM_CONTENTS because that puts the whole
-	   kernel in a single ELF segment, and the Multi debugger (which
-	   we use to load the kernel) appears to have bizarre problems
-	   dealing with it.  */
-
-	.text : {
-		__kram_start = . ;
-		TEXT_CONTENTS
-	} > KRAM
-
-	.data : {
-		DATA_CONTENTS
-		BSS_CONTENTS
-		RAMK_INIT_CONTENTS
-		__kram_end = . ;
-		BOOTMAP_CONTENTS
-
-		/* The address at which the interrupt vectors are initially
-		   loaded by the loader.  We can't load the interrupt vectors
-		   directly into their target location, because the monitor
-		   ROM for the GHS Multi debugger barfs if we try.
-		   Unfortunately, Multi also doesn't deal correctly with ELF
-		   sections where the LMA and VMA differ (it just ignores the
-		   LMA), so we can't use that feature to work around the
-		   problem!  What we do instead is just put the interrupt
-		   vectors into a normal section, and have the
-		   `mach_early_init' function for Midas boards do the
-		   necessary copying and relocation at runtime (this section
-		   basically only contains `jr' instructions, so it's not
-		   that hard).  */
-		. = ALIGN (0x10) ;
-		__intv_load_start = . ;
-		INTV_CONTENTS
-	} > KRAM
-
-	.root ALIGN (4096) : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/rte_nb85e_cb.c b/arch/v850/kernel/rte_nb85e_cb.c
deleted file mode 100644
index b4a045da5d70..000000000000
--- a/arch/v850/kernel/rte_nb85e_cb.c
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * arch/v850/kernel/rte_nb85e_cb.c -- Midas labs RTE-V850E/NB85E-CB board
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/v850e.h>
-#include <asm/rte_nb85e_cb.h>
-
-#include "mach.h"
-
-void __init mach_early_init (void)
-{
-	/* Configure caching; some possible settings:
-
-	     BHC = 0x0000, DCC = 0x0000	 -- all caching disabled
-	     BHC = 0x0040, DCC = 0x0000	 -- SDRAM: icache only
-	     BHC = 0x0080, DCC = 0x0C00	 -- SDRAM: write-back dcache only
-	     BHC = 0x00C0, DCC = 0x0C00	 -- SDRAM: icache + write-back dcache
-	     BHC = 0x00C0, DCC = 0x0800	 -- SDRAM: icache + write-thru dcache
-
-	   We can only cache SDRAM (we can't use cache SRAM because it's in
-	   the same memory region as the on-chip RAM and I/O space).
-
-	   Unfortunately, the dcache seems to be buggy, so we only use the
-	   icache for now.  */
-	v850e_cache_enable (0x0040 /*BHC*/, 0x0003 /*ICC*/, 0x0000 /*DCC*/);
-
-	rte_cb_early_init ();
-}
-
-void __init mach_get_physical_ram (unsigned long *ram_start,
-				   unsigned long *ram_len)
-{
-	/* We just use SDRAM here.  */
-	*ram_start = SDRAM_ADDR;
-	*ram_len = SDRAM_SIZE;
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-/* Called before configuring an on-chip UART.  */
-void rte_nb85e_cb_uart_pre_configure (unsigned chan,
-				    unsigned cflags, unsigned baud)
-{
-	/* The RTE-NB85E-CB connects some general-purpose I/O pins on the
-	   CPU to the RTS/CTS lines the UART's serial connection, as follows:
-	   P00 = CTS (in), P01 = DSR (in), P02 = RTS (out), P03 = DTR (out). */
-
-	TEG_PORT0_PM = 0x03;	/* P00 and P01 inputs, P02 and P03 outputs */
-	TEG_PORT0_IO = 0x03;	/* Accept input */
-
-	/* Do pre-configuration for the actual UART.  */
-	teg_uart_pre_configure (chan, cflags, baud);
-}
-
-void __init mach_init_irqs (void)
-{
-	teg_init_irqs ();
-	rte_cb_init_irqs ();
-}
diff --git a/arch/v850/kernel/rte_nb85e_cb.ld b/arch/v850/kernel/rte_nb85e_cb.ld
deleted file mode 100644
index b672f484f085..000000000000
--- a/arch/v850/kernel/rte_nb85e_cb.ld
+++ /dev/null
@@ -1,22 +0,0 @@
-/* Linker script for the Midas labs RTE-NB85E-CB evaluation board
-   (CONFIG_RTE_CB_NB85E).  */
-
-MEMORY {
-	LOW   : ORIGIN = 0x0,	     LENGTH = 0x00100000
-	/* 1MB of SRAM  This memory is mirrored 4 times.  */
-	SRAM  : ORIGIN = SRAM_ADDR,  LENGTH = SRAM_SIZE
-	/* 16MB of SDRAM.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-#ifdef CONFIG_RTE_CB_NB85E_KSRAM
-# define KRAM SRAM
-#else
-# define KRAM SDRAM
-#endif
-
-SECTIONS {
-	.intv : { INTV_CONTENTS } > LOW
-	.sram : { RAMK_KRAM_CONTENTS } > KRAM
-	.root : { ROOT_FS_CONTENTS } > SDRAM
-}
diff --git a/arch/v850/kernel/setup.c b/arch/v850/kernel/setup.c
deleted file mode 100644
index a0a8456a8430..000000000000
--- a/arch/v850/kernel/setup.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- * arch/v850/kernel/setup.c -- Arch-dependent initialization functions
- *
- *  Copyright (C) 2001,02,03,05,06  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03,05,06  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/mm.h>
-#include <linux/bootmem.h>
-#include <linux/swap.h>		/* we don't have swap, but for nr_free_pages */
-#include <linux/irq.h>
-#include <linux/reboot.h>
-#include <linux/personality.h>
-#include <linux/major.h>
-#include <linux/root_dev.h>
-#include <linux/mtd/mtd.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/setup.h>
-
-#include "mach.h"
-
-/* These symbols are all defined in the linker map to delineate various
-   statically allocated regions of memory.  */
-
-extern char _intv_start, _intv_end;
-/* `kram' is only used if the kernel uses part of normal user RAM.  */
-extern char _kram_start __attribute__ ((__weak__));
-extern char _kram_end __attribute__ ((__weak__));
-extern char _init_start, _init_end;
-extern char _bootmap;
-extern char _stext, _etext, _sdata, _edata, _sbss, _ebss;
-/* Many platforms use an embedded root image.  */
-extern char _root_fs_image_start __attribute__ ((__weak__));
-extern char _root_fs_image_end __attribute__ ((__weak__));
-
-
-char __initdata command_line[COMMAND_LINE_SIZE];
-
-/* Memory not used by the kernel.  */
-static unsigned long total_ram_pages;
-
-/* System RAM.  */
-static unsigned long ram_start = 0, ram_len = 0;
-
-
-#define ADDR_TO_PAGE_UP(x)   ((((unsigned long)x) + PAGE_SIZE-1) >> PAGE_SHIFT)
-#define ADDR_TO_PAGE(x)	     (((unsigned long)x) >> PAGE_SHIFT)
-#define PAGE_TO_ADDR(x)	     (((unsigned long)x) << PAGE_SHIFT)
-
-static void init_mem_alloc (unsigned long ram_start, unsigned long ram_len);
-
-void set_mem_root (void *addr, size_t len, char *cmd_line);
-
-
-void __init setup_arch (char **cmdline)
-{
-	/* Keep a copy of command line */
-	*cmdline = command_line;
-	memcpy (boot_command_line, command_line, COMMAND_LINE_SIZE);
-	boot_command_line[COMMAND_LINE_SIZE - 1] = '\0';
-
-	console_verbose ();
-
-	init_mm.start_code = (unsigned long) &_stext;
-	init_mm.end_code = (unsigned long) &_etext;
-	init_mm.end_data = (unsigned long) &_edata;
-	init_mm.brk = (unsigned long) &_kram_end;
-
-	/* Find out what mem this machine has.  */
-	mach_get_physical_ram (&ram_start, &ram_len);
-	/* ... and tell the kernel about it.  */
-	init_mem_alloc (ram_start, ram_len);
-
-	printk (KERN_INFO "CPU: %s\nPlatform: %s\n",
-		CPU_MODEL_LONG, PLATFORM_LONG);
-
-	/* do machine-specific setups.  */
-	mach_setup (cmdline);
-
-#ifdef CONFIG_MTD
-	if (!ROOT_DEV && &_root_fs_image_end > &_root_fs_image_start)
-		set_mem_root (&_root_fs_image_start,
-			      &_root_fs_image_end - &_root_fs_image_start,
-			      *cmdline);
-#endif
-}
-
-void __init trap_init (void)
-{
-}
-
-#ifdef CONFIG_MTD
-
-/* From drivers/mtd/devices/slram.c */
-#define SLRAM_BLK_SZ 0x4000
-
-/* Set the root filesystem to be the given memory region.
-   Some parameter may be appended to CMD_LINE.  */
-void set_mem_root (void *addr, size_t len, char *cmd_line)
-{
-	/* Some sort of idiocy in MTD means we must supply a length that's
-	   a multiple of SLRAM_BLK_SZ.  We just round up the real length,
-	   as the file system shouldn't attempt to access anything beyond
-	   the end of the image anyway.  */
-	len = (((len - 1) + SLRAM_BLK_SZ) / SLRAM_BLK_SZ) * SLRAM_BLK_SZ;
-
-	/* The only way to pass info to the MTD slram driver is via
-	   the command line.  */
-	if (*cmd_line) {
-		cmd_line += strlen (cmd_line);
-		*cmd_line++ = ' ';
-	}
-	sprintf (cmd_line, "slram=root,0x%x,+0x%x", (u32)addr, (u32)len);
-
-	ROOT_DEV = MKDEV (MTD_BLOCK_MAJOR, 0);
-}
-#endif
-
-
-static void irq_nop (unsigned irq) { }
-static unsigned irq_zero (unsigned irq) { return 0; }
-
-static void nmi_end (unsigned irq)
-{
-	if (irq != IRQ_NMI (0)) {
-		printk (KERN_CRIT "NMI %d is unrecoverable; restarting...",
-			irq - IRQ_NMI (0));
-		machine_restart (0);
-	}
-}
-
-static struct hw_interrupt_type nmi_irq_type = {
-	.typename = "NMI",
-	.startup = irq_zero,		/* startup */
-	.shutdown = irq_nop,		/* shutdown */
-	.enable = irq_nop,		/* enable */
-	.disable = irq_nop,		/* disable */
-	.ack = irq_nop,		/* ack */
-	.end = nmi_end,		/* end */
-};
-
-void __init init_IRQ (void)
-{
-	init_irq_handlers (0, NUM_MACH_IRQS, 1, 0);
-	init_irq_handlers (IRQ_NMI (0), NUM_NMIS, 1, &nmi_irq_type);
-	mach_init_irqs ();
-}
-
-
-void __init mem_init (void)
-{
-	max_mapnr = MAP_NR (ram_start + ram_len);
-
-	num_physpages = ADDR_TO_PAGE (ram_len);
-
-	total_ram_pages = free_all_bootmem ();
-
-	printk (KERN_INFO
-		"Memory: %luK/%luK available"
-		" (%luK kernel code, %luK data)\n",
-		PAGE_TO_ADDR (nr_free_pages()) / 1024,
-		ram_len / 1024,
-		((unsigned long)&_etext - (unsigned long)&_stext) / 1024,
-		((unsigned long)&_ebss - (unsigned long)&_sdata) / 1024);
-}
-
-void free_initmem (void)
-{
-	unsigned long ram_end = ram_start + ram_len;
-	unsigned long start = PAGE_ALIGN ((unsigned long)(&_init_start));
-
-	if (start >= ram_start && start < ram_end) {
-		unsigned long addr;
-		unsigned long end = PAGE_ALIGN ((unsigned long)(&_init_end));
-
-		if (end > ram_end)
-			end = ram_end;
-
-		printk("Freeing unused kernel memory: %ldK freed\n",
-		       (end - start) / 1024);
-
-		for (addr = start; addr < end; addr += PAGE_SIZE) {
-			struct page *page = virt_to_page (addr);
-			ClearPageReserved (page);
-			init_page_count (page);
-			__free_page (page);
-			total_ram_pages++;
-		}
-	}
-}
-
-
-/* Initialize the `bootmem allocator'.  RAM_START and RAM_LEN identify
-   what RAM may be used.  */
-static void __init
-init_bootmem_alloc (unsigned long ram_start, unsigned long ram_len)
-{
-	/* The part of the kernel that's in the same managed RAM space
-	   used for general allocation.  */
-	unsigned long kram_start = (unsigned long)&_kram_start;
-	unsigned long kram_end = (unsigned long)&_kram_end;
-	/* End of the managed RAM space.  */
-	unsigned long ram_end = ram_start + ram_len;
-	/* Address range of the interrupt vector table.  */
-	unsigned long intv_start = (unsigned long)&_intv_start;
-	unsigned long intv_end = (unsigned long)&_intv_end;
-	/* True if the interrupt vectors are in the managed RAM area.  */
-	int intv_in_ram = (intv_end > ram_start && intv_start < ram_end);
-	/* True if the interrupt vectors are inside the kernel's RAM.  */
-	int intv_in_kram = (intv_end > kram_start && intv_start < kram_end);
-	/* A pointer to an optional function that reserves platform-specific
-	   memory regions.  We declare the pointer `volatile' to avoid gcc
-	   turning the call into a static call (the problem is that since
-	   it's a weak symbol, a static call may end up trying to reference
-	   the location 0x0, which is not always reachable).  */
-	void (*volatile mrb) (void) = mach_reserve_bootmem;
-	/* The bootmem allocator's allocation bitmap.  */
-	unsigned long bootmap = (unsigned long)&_bootmap;
-	unsigned long bootmap_len;
-
-	/* Round bootmap location up to next page.  */
-	bootmap = PAGE_TO_ADDR (ADDR_TO_PAGE_UP (bootmap));
-
-	/* Initialize bootmem allocator.  */
-	bootmap_len = init_bootmem_node (NODE_DATA (0),
-					 ADDR_TO_PAGE (bootmap),
-					 ADDR_TO_PAGE (PAGE_OFFSET),
-					 ADDR_TO_PAGE (ram_end));
-
-	/* Now make the RAM actually allocatable (it starts out `reserved'). */
-	free_bootmem (ram_start, ram_len);
-
-	if (kram_end > kram_start)
-		/* Reserve the RAM part of the kernel's address space, so it
-		   doesn't get allocated.  */
-		reserve_bootmem(kram_start, kram_end - kram_start,
-				BOOTMEM_DEFAULT);
-	
-	if (intv_in_ram && !intv_in_kram)
-		/* Reserve the interrupt vector space.  */
-		reserve_bootmem(intv_start, intv_end - intv_start,
-				BOOTMEM_DEFAULT);
-
-	if (bootmap >= ram_start && bootmap < ram_end)
-		/* Reserve the bootmap space.  */
-		reserve_bootmem(bootmap, bootmap_len,
-				BOOTMEM_DEFAULT);
-
-	/* Reserve the memory used by the root filesystem image if it's
-	   in RAM.  */
-	if (&_root_fs_image_end > &_root_fs_image_start
-	    && (unsigned long)&_root_fs_image_start >= ram_start
-	    && (unsigned long)&_root_fs_image_start < ram_end)
-		reserve_bootmem ((unsigned long)&_root_fs_image_start,
-				 &_root_fs_image_end - &_root_fs_image_start,
-				 BOOTMEM_DEFAULT);
-
-	/* Let the platform-dependent code reserve some too.  */
-	if (mrb)
-		(*mrb) ();
-}
-
-/* Tell the kernel about what RAM it may use for memory allocation.  */
-static void __init
-init_mem_alloc (unsigned long ram_start, unsigned long ram_len)
-{
-	unsigned i;
-	unsigned long zones_size[MAX_NR_ZONES];
-
-	init_bootmem_alloc (ram_start, ram_len);
-
-	for (i = 0; i < MAX_NR_ZONES; i++)
-		zones_size[i] = 0;
-
-	/* We stuff all the memory into one area, which includes the
-	   initial gap from PAGE_OFFSET to ram_start.  */
-	zones_size[ZONE_DMA]
-		= ADDR_TO_PAGE (ram_len + (ram_start - PAGE_OFFSET));
-
-	/* The allocator is very picky about the address of the first
-	   allocatable page -- it must be at least as aligned as the
-	   maximum allocation -- so try to detect cases where it will get
-	   confused and signal them at compile time (this is a common
-	   problem when porting to a new platform with ).  There is a
-	   similar runtime check in free_area_init_core.  */
-#if ((PAGE_OFFSET >> PAGE_SHIFT) & ((1UL << (MAX_ORDER - 1)) - 1))
-#error MAX_ORDER is too large for given PAGE_OFFSET (use CONFIG_FORCE_MAX_ZONEORDER to change it)
-#endif
-	NODE_DATA(0)->node_mem_map = NULL;
-	free_area_init_node (0, NODE_DATA(0), zones_size,
-			     ADDR_TO_PAGE (PAGE_OFFSET), 0);
-}
-
-
-
-/* Taken from m68knommu */
-void show_mem(void)
-{
-    unsigned long i;
-    int free = 0, total = 0, reserved = 0, shared = 0;
-    int cached = 0;
-
-    printk(KERN_INFO "\nMem-info:\n");
-    show_free_areas();
-    i = max_mapnr;
-    while (i-- > 0) {
-	total++;
-	if (PageReserved(mem_map+i))
-	    reserved++;
-	else if (PageSwapCache(mem_map+i))
-	    cached++;
-	else if (!page_count(mem_map+i))
-	    free++;
-	else
-	    shared += page_count(mem_map+i) - 1;
-    }
-    printk(KERN_INFO "%d pages of RAM\n",total);
-    printk(KERN_INFO "%d free pages\n",free);
-    printk(KERN_INFO "%d reserved pages\n",reserved);
-    printk(KERN_INFO "%d pages shared\n",shared);
-    printk(KERN_INFO "%d pages swap cached\n",cached);
-}
diff --git a/arch/v850/kernel/signal.c b/arch/v850/kernel/signal.c
deleted file mode 100644
index bf166e7e762c..000000000000
--- a/arch/v850/kernel/signal.c
+++ /dev/null
@@ -1,523 +0,0 @@
-/*
- * arch/v850/kernel/signal.c -- Signal handling
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *  Copyright (C) 1999,2000,2002  Niibe Yutaka & Kaz Kojima
- *  Copyright (C) 1991,1992  Linus Torvalds
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * 1997-11-28  Modified for POSIX.1b signals by Richard Henderson
- *
- * This file was derived from the sh version, arch/sh/kernel/signal.c
- */
-
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/kernel.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/wait.h>
-#include <linux/ptrace.h>
-#include <linux/unistd.h>
-#include <linux/stddef.h>
-#include <linux/personality.h>
-#include <linux/tty.h>
-
-#include <asm/ucontext.h>
-#include <asm/uaccess.h>
-#include <asm/pgtable.h>
-#include <asm/pgalloc.h>
-#include <asm/thread_info.h>
-#include <asm/cacheflush.h>
-
-#define DEBUG_SIG 0
-
-#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
-
-asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
-
-/*
- * Atomically swap in the new signal mask, and wait for a signal.
- */
-asmlinkage int
-sys_sigsuspend(old_sigset_t mask, struct pt_regs *regs)
-{
-	sigset_t saveset;
-
-	mask &= _BLOCKABLE;
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	siginitset(&current->blocked, mask);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->gpr[GPR_RVAL] = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(regs, &saveset))
-			return -EINTR;
-	}
-}
-
-asmlinkage int
-sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize,
-		  struct pt_regs *regs)
-{
-	sigset_t saveset, newset;
-
-	/* XXX: Don't preclude handling different sized sigset_t's.  */
-	if (sigsetsize != sizeof(sigset_t))
-		return -EINVAL;
-
-	if (copy_from_user(&newset, unewset, sizeof(newset)))
-		return -EFAULT;
-	sigdelsetmask(&newset, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	saveset = current->blocked;
-	current->blocked = newset;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	regs->gpr[GPR_RVAL] = -EINTR;
-	while (1) {
-		current->state = TASK_INTERRUPTIBLE;
-		schedule();
-		if (do_signal(regs, &saveset))
-			return -EINTR;
-	}
-}
-
-asmlinkage int 
-sys_sigaction(int sig, const struct old_sigaction *act,
-	      struct old_sigaction *oact)
-{
-	struct k_sigaction new_ka, old_ka;
-	int ret;
-
-	if (act) {
-		old_sigset_t mask;
-		if (!access_ok(VERIFY_READ, act, sizeof(*act)) ||
-		    __get_user(new_ka.sa.sa_handler, &act->sa_handler) ||
-		    __get_user(new_ka.sa.sa_restorer, &act->sa_restorer))
-			return -EFAULT;
-		__get_user(new_ka.sa.sa_flags, &act->sa_flags);
-		__get_user(mask, &act->sa_mask);
-		siginitset(&new_ka.sa.sa_mask, mask);
-	}
-
-	ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL);
-
-	if (!ret && oact) {
-		if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) ||
-		    __put_user(old_ka.sa.sa_handler, &oact->sa_handler) ||
-		    __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer))
-			return -EFAULT;
-		__put_user(old_ka.sa.sa_flags, &oact->sa_flags);
-		__put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask);
-	}
-
-	return ret;
-}
-
-asmlinkage int
-sys_sigaltstack(const stack_t *uss, stack_t *uoss,
-		struct pt_regs *regs)
-{
-	return do_sigaltstack(uss, uoss, regs->gpr[GPR_SP]);
-}
-
-
-/*
- * Do a signal return; undo the signal stack.
- */
-
-struct sigframe
-{
-	struct sigcontext sc;
-	unsigned long extramask[_NSIG_WORDS-1];
-	unsigned long tramp[2];	/* signal trampoline */
-};
-
-struct rt_sigframe
-{
-	struct siginfo info;
-	struct ucontext uc;
-	unsigned long tramp[2];	/* signal trampoline */
-};
-
-static int
-restore_sigcontext(struct pt_regs *regs, struct sigcontext *sc, int *rval_p)
-{
-	unsigned int err = 0;
-
-#define COPY(x)		err |= __get_user(regs->x, &sc->regs.x)
-	COPY(gpr[0]);	COPY(gpr[1]);	COPY(gpr[2]);	COPY(gpr[3]);
-	COPY(gpr[4]);	COPY(gpr[5]);	COPY(gpr[6]);	COPY(gpr[7]);
-	COPY(gpr[8]);	COPY(gpr[9]);	COPY(gpr[10]);	COPY(gpr[11]);
-	COPY(gpr[12]);	COPY(gpr[13]);	COPY(gpr[14]);	COPY(gpr[15]);
-	COPY(gpr[16]);	COPY(gpr[17]);	COPY(gpr[18]);	COPY(gpr[19]);
-	COPY(gpr[20]);	COPY(gpr[21]);	COPY(gpr[22]);	COPY(gpr[23]);
-	COPY(gpr[24]);	COPY(gpr[25]);	COPY(gpr[26]);	COPY(gpr[27]);
-	COPY(gpr[28]);	COPY(gpr[29]);	COPY(gpr[30]);	COPY(gpr[31]);
-	COPY(pc);	COPY(psw);
-	COPY(ctpc);	COPY(ctpsw);	COPY(ctbp);
-#undef COPY
-
-	return err;
-}
-
-asmlinkage int sys_sigreturn(struct pt_regs *regs)
-{
-	struct sigframe *frame = (struct sigframe *)regs->gpr[GPR_SP];
-	sigset_t set;
-	int rval;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-
-	if (__get_user(set.sig[0], &frame->sc.oldmask)
-	    || (_NSIG_WORDS > 1
-		&& __copy_from_user(&set.sig[1], &frame->extramask,
-				    sizeof(frame->extramask))))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	if (restore_sigcontext(regs, &frame->sc, &rval))
-		goto badframe;
-	return rval;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}
-
-asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
-{
-	struct rt_sigframe *frame = (struct rt_sigframe *)regs->gpr[GPR_SP];
-	sigset_t set;
-	stack_t st;
-	int rval;
-
-	if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
-		goto badframe;
-
-	if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
-		goto badframe;
-
-	sigdelsetmask(&set, ~_BLOCKABLE);
-	spin_lock_irq(&current->sighand->siglock);
-	current->blocked = set;
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-
-	if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval))
-		goto badframe;
-
-	if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st)))
-		goto badframe;
-	/* It is more difficult to avoid calling this function than to
-	   call it and ignore errors.  */
-	do_sigaltstack(&st, NULL, regs->gpr[GPR_SP]);
-
-	return rval;
-
-badframe:
-	force_sig(SIGSEGV, current);
-	return 0;
-}	
-
-/*
- * Set up a signal frame.
- */
-
-static int
-setup_sigcontext(struct sigcontext *sc, struct pt_regs *regs,
-		 unsigned long mask)
-{
-	int err = 0;
-
-#define COPY(x)		err |= __put_user(regs->x, &sc->regs.x)
-	COPY(gpr[0]);	COPY(gpr[1]);	COPY(gpr[2]);	COPY(gpr[3]);
-	COPY(gpr[4]);	COPY(gpr[5]);	COPY(gpr[6]);	COPY(gpr[7]);
-	COPY(gpr[8]);	COPY(gpr[9]);	COPY(gpr[10]);	COPY(gpr[11]);
-	COPY(gpr[12]);	COPY(gpr[13]);	COPY(gpr[14]);	COPY(gpr[15]);
-	COPY(gpr[16]);	COPY(gpr[17]);	COPY(gpr[18]);	COPY(gpr[19]);
-	COPY(gpr[20]);	COPY(gpr[21]);	COPY(gpr[22]);	COPY(gpr[23]);
-	COPY(gpr[24]);	COPY(gpr[25]);	COPY(gpr[26]);	COPY(gpr[27]);
-	COPY(gpr[28]);	COPY(gpr[29]);	COPY(gpr[30]);	COPY(gpr[31]);
-	COPY(pc);	COPY(psw);
-	COPY(ctpc);	COPY(ctpsw);	COPY(ctbp);
-#undef COPY
-
-	err |= __put_user(mask, &sc->oldmask);
-
-	return err;
-}
-
-/*
- * Determine which stack to use..
- */
-static inline void *
-get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, size_t frame_size)
-{
-	/* Default to using normal stack */
-	unsigned long sp = regs->gpr[GPR_SP];
-
-	if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp))
-		sp = current->sas_ss_sp + current->sas_ss_size;
-
-	return (void *)((sp - frame_size) & -8UL);
-}
-
-static void setup_frame(int sig, struct k_sigaction *ka,
-			sigset_t *set, struct pt_regs *regs)
-{
-	struct sigframe *frame;
-	int err = 0;
-	int signal;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	signal = current_thread_info()->exec_domain
-		&& current_thread_info()->exec_domain->signal_invmap
-		&& sig < 32
-		? current_thread_info()->exec_domain->signal_invmap[sig]
-		: sig;
-
-	err |= setup_sigcontext(&frame->sc, regs, set->sig[0]);
-
-	if (_NSIG_WORDS > 1) {
-		err |= __copy_to_user(frame->extramask, &set->sig[1],
-				      sizeof(frame->extramask));
-	}
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		regs->gpr[GPR_LP] = (unsigned long) ka->sa.sa_restorer;
-	} else {
-		/* Note, these encodings are _little endian_!  */
-
-		/* addi  __NR_sigreturn, r0, r12  */
-		err |= __put_user(0x6600 | (__NR_sigreturn << 16),
-				  frame->tramp + 0);
-		/* trap 0 */
-		err |= __put_user(0x010007e0,
-				  frame->tramp + 1);
-
-		regs->gpr[GPR_LP] = (unsigned long)frame->tramp;
-
-		flush_cache_sigtramp (regs->gpr[GPR_LP]);
-	}
-
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up registers for signal handler.  */
-	regs->pc = (v850_reg_t) ka->sa.sa_handler;
-	regs->gpr[GPR_SP] = (v850_reg_t)frame;
-	/* Signal handler args:  */
-	regs->gpr[GPR_ARG0] = signal; /* arg 0: signum */
-	regs->gpr[GPR_ARG1] = (v850_reg_t)&frame->sc;/* arg 1: sigcontext */
-
-	set_fs(USER_DS);
-
-#if DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%08lx ra=%08lx\n",
-		current->comm, current->pid, frame, regs->pc, );
-#endif
-
-	return;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-}
-
-static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
-			   sigset_t *set, struct pt_regs *regs)
-{
-	struct rt_sigframe *frame;
-	int err = 0;
-	int signal;
-
-	frame = get_sigframe(ka, regs, sizeof(*frame));
-
-	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
-		goto give_sigsegv;
-
-	signal = current_thread_info()->exec_domain
-		&& current_thread_info()->exec_domain->signal_invmap
-		&& sig < 32
-		? current_thread_info()->exec_domain->signal_invmap[sig]
-		: sig;
-
-	err |= copy_siginfo_to_user(&frame->info, info);
-
-	/* Create the ucontext.  */
-	err |= __put_user(0, &frame->uc.uc_flags);
-	err |= __put_user(0, &frame->uc.uc_link);
-	err |= __put_user((void *)current->sas_ss_sp,
-			  &frame->uc.uc_stack.ss_sp);
-	err |= __put_user(sas_ss_flags(regs->gpr[GPR_SP]),
-			  &frame->uc.uc_stack.ss_flags);
-	err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
-	err |= setup_sigcontext(&frame->uc.uc_mcontext,
-			        regs, set->sig[0]);
-	err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
-
-	/* Set up to return from userspace.  If provided, use a stub
-	   already in userspace.  */
-	if (ka->sa.sa_flags & SA_RESTORER) {
-		regs->gpr[GPR_LP] = (unsigned long) ka->sa.sa_restorer;
-	} else {
-		/* Note, these encodings are _little endian_!  */
-
-		/* addi  __NR_sigreturn, r0, r12  */
-		err |= __put_user(0x6600 | (__NR_sigreturn << 16),
-				  frame->tramp + 0);
-		/* trap 0 */
-		err |= __put_user(0x010007e0,
-				  frame->tramp + 1);
-
-		regs->gpr[GPR_LP] = (unsigned long)frame->tramp;
-
-		flush_cache_sigtramp (regs->gpr[GPR_LP]);
-	}
-
-	if (err)
-		goto give_sigsegv;
-
-	/* Set up registers for signal handler.  */
-	regs->pc = (v850_reg_t) ka->sa.sa_handler;
-	regs->gpr[GPR_SP] = (v850_reg_t)frame;
-	/* Signal handler args:  */
-	regs->gpr[GPR_ARG0] = signal; /* arg 0: signum */
-	regs->gpr[GPR_ARG1] = (v850_reg_t)&frame->info; /* arg 1: siginfo */
-	regs->gpr[GPR_ARG2] = (v850_reg_t)&frame->uc; /* arg 2: ucontext */
-
-	set_fs(USER_DS);
-
-#if DEBUG_SIG
-	printk("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
-		current->comm, current->pid, frame, regs->pc, regs->pr);
-#endif
-
-	return;
-
-give_sigsegv:
-	force_sigsegv(sig, current);
-}
-
-/*
- * OK, we're invoking a handler
- */	
-
-static void
-handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
-	      sigset_t *oldset,	struct pt_regs * regs)
-{
-	/* Are we from a system call? */
-	if (PT_REGS_SYSCALL (regs)) {
-		/* If so, check system call restarting.. */
-		switch (regs->gpr[GPR_RVAL]) {
-		case -ERESTART_RESTARTBLOCK:
-			current_thread_info()->restart_block.fn =
-				do_no_restart_syscall;
-			/* fall through */
-		case -ERESTARTNOHAND:
-			regs->gpr[GPR_RVAL] = -EINTR;
-			break;
-
-		case -ERESTARTSYS:
-			if (!(ka->sa.sa_flags & SA_RESTART)) {
-				regs->gpr[GPR_RVAL] = -EINTR;
-				break;
-			}
-			/* fallthrough */
-		case -ERESTARTNOINTR:
-			regs->gpr[12] = PT_REGS_SYSCALL (regs);
-			regs->pc -= 4; /* Size of `trap 0' insn.  */
-		}
-
-		PT_REGS_SET_SYSCALL (regs, 0);
-	}
-
-	/* Set up the stack frame */
-	if (ka->sa.sa_flags & SA_SIGINFO)
-		setup_rt_frame(sig, ka, info, oldset, regs);
-	else
-		setup_frame(sig, ka, oldset, regs);
-
-	spin_lock_irq(&current->sighand->siglock);
-	sigorsets(&current->blocked,&current->blocked,&ka->sa.sa_mask);
-	if (!(ka->sa.sa_flags & SA_NODEFER))
-		sigaddset(&current->blocked,sig);
-	recalc_sigpending();
-	spin_unlock_irq(&current->sighand->siglock);
-}
-
-/*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
- * Note that we go through the signals twice: once to check the signals that
- * the kernel can handle, and then we build all the user-level signal handling
- * stack-frames in one go after that.
- */
-int do_signal(struct pt_regs *regs, sigset_t *oldset)
-{
-	siginfo_t info;
-	int signr;
-	struct k_sigaction ka;
-
-	/*
-	 * We want the common case to go fast, which
-	 * is why we may in certain cases get here from
-	 * kernel mode. Just return without doing anything
-	 * if so.
-	 */
-	if (!user_mode(regs))
-		return 1;
-
-	if (!oldset)
-		oldset = &current->blocked;
-
-	signr = get_signal_to_deliver(&info, &ka, regs, NULL);
-	if (signr > 0) {
-		/* Whee!  Actually deliver the signal.  */
-		handle_signal(signr, &info, &ka, oldset, regs);
-		return 1;
-	}
-
-	/* Did we come from a system call? */
-	if (PT_REGS_SYSCALL (regs)) {
-		int rval = (int)regs->gpr[GPR_RVAL];
-		/* Restart the system call - no handlers present */
-		if (rval == -ERESTARTNOHAND
-		    || rval == -ERESTARTSYS
-		    || rval == -ERESTARTNOINTR)
-		{
-			regs->gpr[12] = PT_REGS_SYSCALL (regs);
-			regs->pc -= 4; /* Size of `trap 0' insn.  */
-		}
-		else if (rval == -ERESTART_RESTARTBLOCK) {
-			regs->gpr[12] = __NR_restart_syscall;
-			regs->pc -= 4; /* Size of `trap 0' insn.  */
-		}
-	}
-	return 0;
-}
diff --git a/arch/v850/kernel/sim.c b/arch/v850/kernel/sim.c
deleted file mode 100644
index 467b4aa0acdd..000000000000
--- a/arch/v850/kernel/sim.c
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * arch/v850/kernel/sim.c -- Machine-specific stuff for GDB v850e simulator
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/simsyscall.h>
-
-#include "mach.h"
-
-/* The name of a file containing the root filesystem.  */
-#define ROOT_FS "rootfs.image"
-
-extern void simcons_setup (void);
-extern void simcons_poll_ttys (void);
-extern void set_mem_root (void *addr, size_t len, char *cmd_line);
-
-static int read_file (const char *name,
-		      unsigned long *addr, unsigned long *len,
-		      const char **err);
-
-void __init mach_setup (char **cmdline)
-{
-	const char *err;
-	unsigned long root_dev_addr, root_dev_len;
-
-	simcons_setup ();
-
-	printk (KERN_INFO "Reading root filesystem: %s", ROOT_FS);
-
-	if (read_file (ROOT_FS, &root_dev_addr, &root_dev_len, &err)) {
-		printk (" (size %luK)\n", root_dev_len / 1024);
-		set_mem_root ((void *)root_dev_addr, (size_t)root_dev_len,
-			      *cmdline);
-	} else
-		printk ("...%s failed!\n", err);
-}
-
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
-{
-	*ram_start = RAM_ADDR;
-	*ram_len = RAM_SIZE;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* ...do magic timer initialization?...  */
-	mach_tick = simcons_poll_ttys;
-	setup_irq (0, timer_action);
-}
-
-
-static void irq_nop (unsigned irq) { }
-static unsigned irq_zero (unsigned irq) { return 0; }
-
-static struct hw_interrupt_type sim_irq_type = {
-	.typename = "IRQ",
-	.startup = irq_zero,		/* startup */
-	.shutdown = irq_nop,		/* shutdown */
-	.enable = irq_nop,		/* enable */
-	.disable = irq_nop,		/* disable */
-	.ack = irq_nop,		/* ack */
-	.end = irq_nop,		/* end */
-};
-
-void __init mach_init_irqs (void)
-{
-	init_irq_handlers (0, NUM_MACH_IRQS, 1, &sim_irq_type);
-}
-
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	long timeval[2], timezone[2];
-	int rval = V850_SIM_SYSCALL (gettimeofday, timeval, timezone);
-	if (rval == 0) {
-		tv->tv_sec = timeval[0];
-		tv->tv_nsec = timeval[1] * 1000;
-	}
-}
-
-void machine_restart (char *__unused)
-{
-	V850_SIM_SYSCALL (write, 1, "RESTART\n", 8);
-	V850_SIM_SYSCALL (exit, 0);
-}
-
-void machine_halt (void)
-{
-	V850_SIM_SYSCALL (write, 1, "HALT\n", 5);
-	V850_SIM_SYSCALL (exit, 0);
-}
-
-void machine_power_off (void)
-{
-	V850_SIM_SYSCALL (write, 1, "POWER OFF\n", 10);
-	V850_SIM_SYSCALL (exit, 0);
-}
-
-
-/* Load data from a file called NAME into ram.  The address and length
-   of the data image are returned in ADDR and LEN.  */
-static int __init
-read_file (const char *name,
-	   unsigned long *addr, unsigned long *len,
-	   const char **err)
-{
-	int rval, fd;
-	unsigned long cur, left;
-	/* Note this is not a normal stat buffer, it's an ad-hoc
-	   structure defined by the simulator.  */
-	unsigned long stat_buf[10];
-
-	/* Stat the file to find out the length.  */
-	rval = V850_SIM_SYSCALL (stat, name, stat_buf);
-	if (rval < 0) {
-		if (err) *err = "stat";
-		return 0;
-	}
-	*len = stat_buf[4];
-
-	/* Open the file; `0' is O_RDONLY.  */
-	fd = V850_SIM_SYSCALL (open, name, 0);
-	if (fd < 0) {
-		if (err) *err = "open";
-		return 0;
-	}
-
-	*addr = (unsigned long)alloc_bootmem(*len);
-	if (! *addr) {
-		V850_SIM_SYSCALL (close, fd);
-		if (err) *err = "alloc_bootmem";
-		return 0;
-	}
-
-	cur = *addr;
-	left = *len;
-	while (left > 0) {
-		int chunk = V850_SIM_SYSCALL (read, fd, cur, left);
-		if (chunk <= 0)
-			break;
-		cur += chunk;
-		left -= chunk;
-	}
-	V850_SIM_SYSCALL (close, fd);
-	if (left > 0) {
-		/* Some read failed.  */
-		free_bootmem (*addr, *len);
-		if (err) *err = "read";
-		return 0;
-	}
-
-	return 1;
-}
diff --git a/arch/v850/kernel/sim.ld b/arch/v850/kernel/sim.ld
deleted file mode 100644
index 101885f3c9f0..000000000000
--- a/arch/v850/kernel/sim.ld
+++ /dev/null
@@ -1,13 +0,0 @@
-/* Linker script for the gdb v850e simulator (CONFIG_V850E_SIM).  */
-
-MEMORY {
-	/* Interrupt vectors.  */
-	INTV  : ORIGIN = 0x0, LENGTH = 0xe0
-	/* Main RAM.  */
-	RAM   : ORIGIN = RAM_ADDR, LENGTH = RAM_SIZE
-}
-
-SECTIONS {
-	.intv : { INTV_CONTENTS } > INTV
-	.ram : { RAMK_KRAM_CONTENTS } > RAM
-}
diff --git a/arch/v850/kernel/sim85e2.c b/arch/v850/kernel/sim85e2.c
deleted file mode 100644
index 566dde5e6070..000000000000
--- a/arch/v850/kernel/sim85e2.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * arch/v850/kernel/sim85e2.c -- Machine-specific stuff for
- *	V850E2 RTL simulator
- *
- *  Copyright (C) 2002,03  NEC Electronics Corporation
- *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-
-#include "mach.h"
-
-
-/* There are 4 possible areas we can use:
-
-     IRAM (1MB) is fast for instruction fetches, but slow for data
-     DRAM (1020KB) is fast for data, but slow for instructions
-     ERAM is cached, so should be fast for both insns and data
-     SDRAM is external DRAM, similar to ERAM
-*/
-
-#define INIT_MEMC_FOR_SDRAM
-#define USE_SDRAM_AREA
-#define KERNEL_IN_SDRAM_AREA
-
-#define DCACHE_MODE	V850E2_CACHE_BTSC_DCM_WT
-/*#define DCACHE_MODE	V850E2_CACHE_BTSC_DCM_WB_ALLOC*/
-
-#ifdef USE_SDRAM_AREA
-#define RAM_START 	SDRAM_ADDR
-#define RAM_END		(SDRAM_ADDR + SDRAM_SIZE)
-#else
-/* When we use DRAM, we need to account for the fact that the end of it is
-   used for R0_RAM.  */
-#define RAM_START	DRAM_ADDR
-#define RAM_END		R0_RAM_ADDR
-#endif
-
-
-extern void memcons_setup (void);
-
-
-#ifdef KERNEL_IN_SDRAM_AREA
-#define EARLY_INIT_SECTION_ATTR __attribute__ ((section (".early.text")))
-#else
-#define EARLY_INIT_SECTION_ATTR __init
-#endif
-
-void EARLY_INIT_SECTION_ATTR mach_early_init (void)
-{
-	/* The sim85e2 simulator tracks `undefined' values, so to make
-	   debugging easier, we begin by zeroing out all otherwise
-	   undefined registers.  This is not strictly necessary.
-
-	   The registers we zero are:
-	       Every GPR except:
-	           stack-pointer (r3)
-		   task-pointer (r16)
-		   our return addr (r31)
-	       Every system register (SPR) that we know about except for
-	       the PSW (SPR 5), which we zero except for the
-	       disable-interrupts bit.
-	*/
-
-	/* GPRs */
-	asm volatile ("             mov r0, r1 ; mov r0, r2              ");
-	asm volatile ("mov r0, r4 ; mov r0, r5 ; mov r0, r6 ; mov r0, r7 ");
-	asm volatile ("mov r0, r8 ; mov r0, r9 ; mov r0, r10; mov r0, r11");
-	asm volatile ("mov r0, r12; mov r0, r13; mov r0, r14; mov r0, r15");
-	asm volatile ("             mov r0, r17; mov r0, r18; mov r0, r19");
-	asm volatile ("mov r0, r20; mov r0, r21; mov r0, r22; mov r0, r23");
-	asm volatile ("mov r0, r24; mov r0, r25; mov r0, r26; mov r0, r27");
-	asm volatile ("mov r0, r28; mov r0, r29; mov r0, r30");
-
-	/* SPRs */
-	asm volatile ("ldsr r0, 0;  ldsr r0, 1;  ldsr r0, 2;  ldsr r0, 3");
-	asm volatile ("ldsr r0, 4");
-	asm volatile ("addi 0x20, r0, r1; ldsr r1, 5"); /* PSW */
-	asm volatile ("ldsr r0, 16; ldsr r0, 17; ldsr r0, 18; ldsr r0, 19");
-	asm volatile ("ldsr r0, 20");
-
-
-#ifdef INIT_MEMC_FOR_SDRAM
-	/* Settings for SDRAM controller.  */
-	V850E2_VSWC   = 0x0042;
-	V850E2_BSC    = 0x9286;
-	V850E2_BCT(0) = 0xb000;	/* was: 0 */
-	V850E2_BCT(1) = 0x000b;
-	V850E2_ASC    = 0;
-	V850E2_LBS    = 0xa9aa;	/* was: 0xaaaa */
-	V850E2_LBC(0) = 0;
-	V850E2_LBC(1) = 0;	/* was: 0x3 */
-	V850E2_BCC    = 0;
-	V850E2_RFS(4) = 0x800a;	/* was: 0xf109 */
-	V850E2_SCR(4) = 0x2091;	/* was: 0x20a1 */
-	V850E2_RFS(3) = 0x800c;
-	V850E2_SCR(3) = 0x20a1;
-	V850E2_DWC(0) = 0;
-	V850E2_DWC(1) = 0;
-#endif
-
-#if 0
-#ifdef CONFIG_V850E2_SIM85E2S
-	/* Turn on the caches.  */
-	V850E2_CACHE_BTSC = V850E2_CACHE_BTSC_ICM | DCACHE_MODE;
-	V850E2_BHC  = 0x1010;
-#elif CONFIG_V850E2_SIM85E2C
-	V850E2_CACHE_BTSC |= (V850E2_CACHE_BTSC_ICM | V850E2_CACHE_BTSC_DCM0);
-	V850E2_BUSM_BHC = 0xFFFF;
-#endif
-#else
-	V850E2_BHC  = 0;
-#endif
-
-	/* Don't stop the simulator at `halt' instructions.  */
-	SIM85E2_NOTHAL = 1;
-
-	/* Ensure that the simulator halts on a panic, instead of going
-	   into an infinite loop inside the panic function.  */
-	panic_timeout = -1;
-}
-
-void __init mach_setup (char **cmdline)
-{
-	memcons_setup ();
-}
-
-void mach_get_physical_ram (unsigned long *ram_start, unsigned long *ram_len)
-{
-	*ram_start = RAM_START;
-	*ram_len = RAM_END - RAM_START;
-}
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* The simulator actually cycles through all interrupts
-	   periodically.  We just pay attention to IRQ0, which gives us
-	   1/64 the rate of the periodic interrupts.  */
-	setup_irq (0, timer_action);
-}
-
-void mach_gettimeofday (struct timespec *tv)
-{
-	tv->tv_sec = 0;
-	tv->tv_nsec = 0;
-}
-
-/* Interrupts */
-
-struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0, NUM_MACH_IRQS, 1, 7 },
-	{ 0 }
-};
-struct hw_interrupt_type hw_itypes[1];
-
-/* Initialize interrupts.  */
-void __init mach_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-
-void machine_halt (void) __attribute__ ((noreturn));
-void machine_halt (void)
-{
-	SIM85E2_SIMFIN = 0;	/* Halt immediately.  */
-	for (;;) {}
-}
-
-void machine_restart (char *__unused)
-{
-	machine_halt ();
-}
-
-void machine_power_off (void)
-{
-	machine_halt ();
-}
-
diff --git a/arch/v850/kernel/sim85e2.ld b/arch/v850/kernel/sim85e2.ld
deleted file mode 100644
index 7470fd2ffb5b..000000000000
--- a/arch/v850/kernel/sim85e2.ld
+++ /dev/null
@@ -1,36 +0,0 @@
-/* Linker script for the sim85e2c simulator, which is a verilog simulation of
-   the V850E2 NA85E2C cpu core (CONFIG_V850E2_SIM85E2C).  */
-
-MEMORY {
-	/* 1MB of `instruction RAM', starting at 0.
-	   Instruction fetches are much faster from IRAM than from DRAM.  */
-	IRAM : ORIGIN = IRAM_ADDR, LENGTH = IRAM_SIZE
-
-	/* 1MB of `data RAM', below and contiguous with the I/O space.
-	   Data fetches are much faster from DRAM than from IRAM.  */
-	DRAM : ORIGIN = DRAM_ADDR, LENGTH = DRAM_SIZE
-
-	/* `external ram' (CS1 area), comes after IRAM.  */
-	ERAM : ORIGIN = ERAM_ADDR, LENGTH = ERAM_SIZE
-
-	/* Dynamic RAM; uses memory controller.  */
-	SDRAM : ORIGIN = SDRAM_ADDR, LENGTH = SDRAM_SIZE
-}
-
-SECTIONS {
-	.iram : {
-		INTV_CONTENTS
-		*arch/v850/kernel/head.o
-		*(.early.text)
-	} > IRAM
-	.dram : {
-		_memcons_output = . ;
-		. = . + 0x8000 ;
-		_memcons_output_end = . ;
-	} > DRAM
-	.sdram : {
-		/* We stick console output into a buffer here.  */
-		RAMK_KRAM_CONTENTS
-		ROOT_FS_CONTENTS
-	} > SDRAM
-}
diff --git a/arch/v850/kernel/simcons.c b/arch/v850/kernel/simcons.c
deleted file mode 100644
index 9973596ae304..000000000000
--- a/arch/v850/kernel/simcons.c
+++ /dev/null
@@ -1,161 +0,0 @@
-/*
- * arch/v850/kernel/simcons.c -- Console I/O for GDB v850e simulator
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/tty_driver.h>
-#include <linux/init.h>
-
-#include <asm/poll.h>
-#include <asm/string.h>
-#include <asm/simsyscall.h>
-
-
-/*  Low-level console. */
-
-static void simcons_write (struct console *co, const char *buf, unsigned len)
-{
-	V850_SIM_SYSCALL (write, 1, buf, len);
-}
-
-static int simcons_read (struct console *co, char *buf, unsigned len)
-{
-	return V850_SIM_SYSCALL (read, 0, buf, len);
-}
-
-static struct tty_driver *tty_driver;
-static struct tty_driver *simcons_device (struct console *c, int *index)
-{
-	*index = c->index;
-	return tty_driver;
-}
-
-static struct console simcons =
-{
-    .name	= "simcons",
-    .write	= simcons_write,
-    .read	= simcons_read,
-    .device	= simcons_device,
-    .flags	= CON_PRINTBUFFER,
-    .index	= -1,
-};
-
-/* Higher level TTY interface.  */
-
-int simcons_tty_open (struct tty_struct *tty, struct file *filp)
-{
-	return 0;
-}
-
-int simcons_tty_write (struct tty_struct *tty,
-		       const unsigned char *buf, int count)
-{
-	return V850_SIM_SYSCALL (write, 1, buf, count);
-}
-
-int simcons_tty_write_room (struct tty_struct *tty)
-{
-	/* Completely arbitrary.  */
-	return 0x100000;
-}
-
-int simcons_tty_chars_in_buffer (struct tty_struct *tty)
-{
-	/* We have no buffer.  */
-	return 0;
-}
-
-static const struct tty_operations ops = {
-	.open = simcons_tty_open,
-	.write = simcons_tty_write,
-	.write_room = simcons_tty_write_room,
-	.chars_in_buffer = simcons_tty_chars_in_buffer,
-};
-
-int __init simcons_tty_init (void)
-{
-	struct tty_driver *driver = alloc_tty_driver(1);
-	int err;
-	if (!driver)
-		return -ENOMEM;
-	driver->name = "simcons";
-	driver->major = TTY_MAJOR;
-	driver->minor_start = 64;
-	driver->type = TTY_DRIVER_TYPE_SYSCONS;
-	driver->init_termios = tty_std_termios;
-	tty_set_operations(driver, &ops);
-	err = tty_register_driver(driver);
-	if (err) {
-		put_tty_driver(driver);
-		return err;
-	}
-	tty_driver = driver;
-	return 0;
-}
-/* We use `late_initcall' instead of just `__initcall' as a workaround for
-   the fact that (1) simcons_tty_init can't be called before tty_init,
-   (2) tty_init is called via `module_init', (3) if statically linked,
-   module_init == device_init, and (4) there's no ordering of init lists.
-   We can do this easily because simcons is always statically linked, but
-   other tty drivers that depend on tty_init and which must use
-   `module_init' to declare their init routines are likely to be broken.  */
-late_initcall(simcons_tty_init);
-
-/* Poll for input on the console, and if there's any, deliver it to the
-   tty driver.  */
-void simcons_poll_tty (struct tty_struct *tty)
-{
-	char buf[32];	/* Not the nicest way to do it but I need it correct first */
-	int flip = 0, send_break = 0;
-	struct pollfd pfd;
-	pfd.fd = 0;
-	pfd.events = POLLIN;
-
-	if (V850_SIM_SYSCALL (poll, &pfd, 1, 0) > 0) {
-		if (pfd.revents & POLLIN) {
-			/* Real block hardware knows the transfer size before
-			   transfer so the new tty buffering doesn't try to handle
-			   this rather weird simulator specific case well */
-			int rd = V850_SIM_SYSCALL (read, 0, buf, 32);
-			if (rd > 0) {
-				tty_insert_flip_string(tty, buf, rd);
-				flip = 1;
-			} else
-				send_break = 1;
-		} else if (pfd.revents & POLLERR)
-			send_break = 1;
-	}
-
-	if (send_break) {
-		tty_insert_flip_char (tty, 0, TTY_BREAK);		
-		flip = 1;
-	}
-
-	if (flip)
-		tty_schedule_flip (tty);
-}
-
-void simcons_poll_ttys (void)
-{
-	if (tty_driver && tty_driver->ttys[0])
-		simcons_poll_tty (tty_driver->ttys[0]);
-}
-
-void simcons_setup (void)
-{
-	V850_SIM_SYSCALL (make_raw, 0);
-	register_console (&simcons);
-	printk (KERN_INFO "Console: GDB V850E simulator stdio\n");
-}
diff --git a/arch/v850/kernel/syscalls.c b/arch/v850/kernel/syscalls.c
deleted file mode 100644
index 1a83daf8e24f..000000000000
--- a/arch/v850/kernel/syscalls.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * arch/v850/kernel/syscalls.c -- Various system-call definitions not
- * 	defined in machine-independent code
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * This file was derived the ppc version, arch/ppc/kernel/syscalls.c
- * ... which was derived from "arch/i386/kernel/sys_i386.c" by Gary Thomas;
- *     modified by Cort Dougan (cort@cs.nmt.edu)
- *     and Paul Mackerras (paulus@cs.anu.edu.au).
- */
-
-#include <linux/errno.h>
-#include <linux/mm.h>
-#include <linux/smp.h>
-#include <linux/syscalls.h>
-#include <linux/sem.h>
-#include <linux/msg.h>
-#include <linux/shm.h>
-#include <linux/stat.h>
-#include <linux/mman.h>
-#include <linux/sys.h>
-#include <linux/ipc.h>
-#include <linux/utsname.h>
-#include <linux/file.h>
-
-#include <asm/uaccess.h>
-#include <asm/unistd.h>
-
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly.
- */
-int
-sys_ipc (uint call, int first, int second, int third, void *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	ret = -EINVAL;
-	switch (call) {
-	case SEMOP:
-		ret = sys_semop (first, (struct sembuf *)ptr, second);
-		break;
-	case SEMGET:
-		ret = sys_semget (first, second, third);
-		break;
-	case SEMCTL:
-	{
-		union semun fourth;
-
-		if (!ptr)
-			break;
-		if ((ret = access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT)
-		    || (ret = get_user(fourth.__pad, (void **)ptr)))
-			break;
-		ret = sys_semctl (first, second, third, fourth);
-		break;
-	}
-	case MSGSND:
-		ret = sys_msgsnd (first, (struct msgbuf *) ptr, second, third);
-		break;
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-
-			if (!ptr)
-				break;
-			if ((ret = access_ok(VERIFY_READ, ptr, sizeof(tmp)) ? 0 : -EFAULT)
-			    || (ret = copy_from_user(&tmp,
-						(struct ipc_kludge *) ptr,
-						sizeof (tmp))))
-				break;
-			ret = sys_msgrcv (first, tmp.msgp, second, tmp.msgtyp,
-					  third);
-			break;
-			}
-		default:
-			ret = sys_msgrcv (first, (struct msgbuf *) ptr,
-					  second, fifth, third);
-			break;
-		}
-		break;
-	case MSGGET:
-		ret = sys_msgget ((key_t) first, second);
-		break;
-	case MSGCTL:
-		ret = sys_msgctl (first, second, (struct msqid_ds *) ptr);
-		break;
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-
-			if ((ret = access_ok(VERIFY_WRITE, (ulong*) third,
-					       sizeof(ulong)) ? 0 : -EFAULT))
-				break;
-			ret = do_shmat (first, (char *) ptr, second, &raddr);
-			if (ret)
-				break;
-			ret = put_user (raddr, (ulong *) third);
-			break;
-			}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				break;
-			ret = do_shmat (first, (char *) ptr, second,
-					 (ulong *) third);
-			break;
-		}
-		break;
-	case SHMDT: 
-		ret = sys_shmdt ((char *)ptr);
-		break;
-	case SHMGET:
-		ret = sys_shmget (first, second, third);
-		break;
-	case SHMCTL:
-		ret = sys_shmctl (first, second, (struct shmid_ds *) ptr);
-		break;
-	}
-
-	return ret;
-}
-
-static inline unsigned long
-do_mmap2 (unsigned long addr, size_t len,
-	 unsigned long prot, unsigned long flags,
-	 unsigned long fd, unsigned long pgoff)
-{
-	struct file * file = NULL;
-	int ret = -EBADF;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-	if (! (flags & MAP_ANONYMOUS)) {
-		if (!(file = fget (fd)))
-			goto out;
-	}
-	
-	down_write (&current->mm->mmap_sem);
-	ret = do_mmap_pgoff (file, addr, len, prot, flags, pgoff);
-	up_write (&current->mm->mmap_sem);
-	if (file)
-		fput (file);
-out:
-	return ret;
-}
-
-unsigned long sys_mmap2 (unsigned long addr, size_t len,
-			unsigned long prot, unsigned long flags,
-			unsigned long fd, unsigned long pgoff)
-{
-	return do_mmap2 (addr, len, prot, flags, fd, pgoff);
-}
-
-unsigned long sys_mmap (unsigned long addr, size_t len,
-		       unsigned long prot, unsigned long flags,
-		       unsigned long fd, off_t offset)
-{
-	int err = -EINVAL;
-
-	if (offset & ~PAGE_MASK)
-		goto out;
-
-	err = do_mmap2 (addr, len, prot, flags, fd, offset >> PAGE_SHIFT);
-out:
-	return err;
-}
-
-/*
- * Do a system call from kernel instead of calling sys_execve so we
- * end up with proper pt_regs.
- */
-int kernel_execve(const char *filename, char *const argv[], char *const envp[])
-{
-	register char *__a __asm__ ("r6") = filename;
-	register void *__b __asm__ ("r7") = argv;
-	register void *__c __asm__ ("r8") = envp;
-	register unsigned long __syscall __asm__ ("r12") = __NR_execve;
-	register unsigned long __ret __asm__ ("r10");
-	__asm__ __volatile__ ("trap 0"
-			: "=r" (__ret), "=r" (__syscall)
-			: "1" (__syscall), "r" (__a), "r" (__b), "r" (__c)
-			: "r1", "r5", "r11", "r13", "r14",
-			  "r15", "r16", "r17", "r18", "r19");
-	return __ret;
-}
diff --git a/arch/v850/kernel/teg.c b/arch/v850/kernel/teg.c
deleted file mode 100644
index 699248f92aae..000000000000
--- a/arch/v850/kernel/teg.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * arch/v850/kernel/teg.c -- NB85E-TEG cpu chip
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/bootmem.h>
-#include <linux/irq.h>
-
-#include <asm/atomic.h>
-#include <asm/page.h>
-#include <asm/machdep.h>
-#include <asm/v850e_timer_d.h>
-
-#include "mach.h"
-
-void __init mach_sched_init (struct irqaction *timer_action)
-{
-	/* Select timer interrupt instead of external pin.  */
-	TEG_ISS |= 0x1;
-	/* Start hardware timer.  */
-	v850e_timer_d_configure (0, HZ);
-	/* Install timer interrupt handler.  */
-	setup_irq (IRQ_INTCMD(0), timer_action);
-}
-
-static struct v850e_intc_irq_init irq_inits[] = {
-	{ "IRQ", 0,		NUM_CPU_IRQS,	1, 7 },
-	{ "CMD", IRQ_INTCMD(0),	IRQ_INTCMD_NUM,	1, 5 },
-	{ "SER", IRQ_INTSER(0),	IRQ_INTSER_NUM,	1, 3 },
-	{ "SR",	 IRQ_INTSR(0),	IRQ_INTSR_NUM,	1, 4 },
-	{ "ST",	 IRQ_INTST(0),	IRQ_INTST_NUM,	1, 5 },
-	{ 0 }
-};
-#define NUM_IRQ_INITS (ARRAY_SIZE(irq_inits) - 1)
-
-static struct hw_interrupt_type hw_itypes[NUM_IRQ_INITS];
-
-/* Initialize MA chip interrupts.  */
-void __init teg_init_irqs (void)
-{
-	v850e_intc_init_irq_types (irq_inits, hw_itypes);
-}
-
-/* Called before configuring an on-chip UART.  */
-void teg_uart_pre_configure (unsigned chan, unsigned cflags, unsigned baud)
-{
-	/* Enable UART I/O pins instead of external interrupt pins, and
-	   UART interrupts instead of external pin interrupts.  */
-	TEG_ISS |= 0x4E;
-}
diff --git a/arch/v850/kernel/time.c b/arch/v850/kernel/time.c
deleted file mode 100644
index d810c93fe665..000000000000
--- a/arch/v850/kernel/time.c
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * linux/arch/v850/kernel/time.c -- Arch-dependent timer functions
- *
- *  Copyright (C) 1991, 1992, 1995, 2001, 2002  Linus Torvalds
- *
- * This file contains the v850-specific time handling details.
- * Most of the stuff is located in the machine specific files.
- *
- * 1997-09-10	Updated NTP code according to technical memorandum Jan '96
- *		"A Kernel Model for Precision Timekeeping" by Dave Mills
- */
-
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/profile.h>
-
-#include <asm/io.h>
-
-#include "mach.h"
-
-#define TICK_SIZE	(tick_nsec / 1000)
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-static irqreturn_t timer_interrupt (int irq, void *dummy, struct pt_regs *regs)
-{
-#if 0
-	/* last time the cmos clock got updated */
-	static long last_rtc_update=0;
-#endif
-
-	/* may need to kick the hardware timer */
-	if (mach_tick)
-	  mach_tick ();
-
-	do_timer (1);
-#ifndef CONFIG_SMP
-	update_process_times(user_mode(regs));
-#endif
-	profile_tick(CPU_PROFILING, regs);
-#if 0
-	/*
-	 * If we have an externally synchronized Linux clock, then update
-	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
-	 * called as close as possible to 500 ms before the new second starts.
-	 */
-	if (ntp_synced() &&
-	    xtime.tv_sec > last_rtc_update + 660 &&
-	    (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
-	    (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
-	  if (set_rtc_mmss (xtime.tv_sec) == 0)
-	    last_rtc_update = xtime.tv_sec;
-	  else
-	    last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
-	}
-#ifdef CONFIG_HEARTBEAT
-	/* use power LED as a heartbeat instead -- much more useful
-	   for debugging -- based on the version for PReP by Cort */
-	/* acts like an actual heart beat -- ie thump-thump-pause... */
-	if (mach_heartbeat) {
-	    static unsigned cnt = 0, period = 0, dist = 0;
-
-	    if (cnt == 0 || cnt == dist)
-		mach_heartbeat ( 1 );
-	    else if (cnt == 7 || cnt == dist+7)
-		mach_heartbeat ( 0 );
-
-	    if (++cnt > period) {
-		cnt = 0;
-		/* The hyperbolic function below modifies the heartbeat period
-		 * length in dependency of the current (5min) load. It goes
-		 * through the points f(0)=126, f(1)=86, f(5)=51,
-		 * f(inf)->30. */
-		period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
-		dist = period / 4;
-	    }
-	}
-#endif /* CONFIG_HEARTBEAT */
-#endif /* 0 */
-
-	return IRQ_HANDLED;
-}
-
-static int timer_dev_id;
-static struct irqaction timer_irqaction = {
-	.handler = timer_interrupt,
-	.flags = IRQF_DISABLED,
-	.mask = CPU_MASK_NONE,
-	.name = "timer",
-	.dev_id = &timer_dev_id,
-};
-
-void time_init (void)
-{
-	mach_gettimeofday (&xtime);
-	mach_sched_init (&timer_irqaction);
-}
diff --git a/arch/v850/kernel/v850_ksyms.c b/arch/v850/kernel/v850_ksyms.c
deleted file mode 100644
index 8d386a5dbc4a..000000000000
--- a/arch/v850/kernel/v850_ksyms.c
+++ /dev/null
@@ -1,51 +0,0 @@
-#include <linux/module.h>
-#include <linux/linkage.h>
-#include <linux/sched.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/user.h>
-#include <linux/elfcore.h>
-#include <linux/in6.h>
-#include <linux/interrupt.h>
-
-#include <asm/pgalloc.h>
-#include <asm/irq.h>
-#include <asm/io.h>
-#include <asm/checksum.h>
-#include <asm/current.h>
-
-
-extern void *trap_table;
-EXPORT_SYMBOL (trap_table);
-
-/* platform dependent support */
-EXPORT_SYMBOL (kernel_thread);
-EXPORT_SYMBOL (__bug);
-
-/* Networking helper routines. */
-EXPORT_SYMBOL (csum_partial_copy_nocheck);
-EXPORT_SYMBOL (csum_partial_copy_from_user);
-EXPORT_SYMBOL (ip_compute_csum);
-EXPORT_SYMBOL (ip_fast_csum);
-
-/* string / mem functions */
-EXPORT_SYMBOL (memset);
-EXPORT_SYMBOL (memcpy);
-EXPORT_SYMBOL (memmove);
-
-/*
- * libgcc functions - functions that are used internally by the
- * compiler...  (prototypes are not correct though, but that
- * doesn't really matter since they're not versioned).
- */
-extern void __ashldi3 (void);
-extern void __ashrdi3 (void);
-extern void __lshrdi3 (void);
-extern void __muldi3 (void);
-extern void __negdi2 (void);
-
-EXPORT_SYMBOL (__ashldi3);
-EXPORT_SYMBOL (__ashrdi3);
-EXPORT_SYMBOL (__lshrdi3);
-EXPORT_SYMBOL (__muldi3);
-EXPORT_SYMBOL (__negdi2);
diff --git a/arch/v850/kernel/v850e2_cache.c b/arch/v850/kernel/v850e2_cache.c
deleted file mode 100644
index 4570312c689c..000000000000
--- a/arch/v850/kernel/v850e2_cache.c
+++ /dev/null
@@ -1,127 +0,0 @@
-/*
- * arch/v850/kernel/v850e2_cache.c -- Cache control for V850E2 cache
- * 	memories
- *
- *  Copyright (C) 2003  NEC Electronics Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/mm.h>
-
-#include <asm/v850e2_cache.h>
-
-/* Cache operations we can do.  The encoding corresponds directly to the
-   value we need to write into the COPR register.  */
-enum cache_op {
-	OP_SYNC_IF_DIRTY 	   = V850E2_CACHE_COPR_CFC(0), /* 000 */
-	OP_SYNC_IF_VALID 	   = V850E2_CACHE_COPR_CFC(1), /* 001 */
-	OP_SYNC_IF_VALID_AND_CLEAR = V850E2_CACHE_COPR_CFC(3), /* 011 */
-	OP_WAY_CLEAR 		   = V850E2_CACHE_COPR_CFC(4), /* 100 */
-	OP_FILL 		   = V850E2_CACHE_COPR_CFC(5), /* 101 */
-	OP_CLEAR 		   = V850E2_CACHE_COPR_CFC(6), /* 110 */
-	OP_CREATE_DIRTY 	   = V850E2_CACHE_COPR_CFC(7)  /* 111 */
-};
-
-/* Which cache to use.  This encoding also corresponds directly to the
-   value we need to write into the COPR register. */
-enum cache {
-	ICACHE = 0,
-	DCACHE = V850E2_CACHE_COPR_LBSL
-};
-
-/* Returns ADDR rounded down to the beginning of its cache-line.  */
-#define CACHE_LINE_ADDR(addr)  \
-   ((addr) & ~(V850E2_CACHE_LINE_SIZE - 1))
-/* Returns END_ADDR rounded up to the `limit' of its cache-line.  */
-#define CACHE_LINE_END_ADDR(end_addr)  \
-   CACHE_LINE_ADDR(end_addr + (V850E2_CACHE_LINE_SIZE - 1))
-
-
-/* Low-level cache ops.  */
-
-/* Apply cache-op OP to all entries in CACHE.  */
-static inline void cache_op_all (enum cache_op op, enum cache cache)
-{
-	int cmd = op | cache | V850E2_CACHE_COPR_WSLE | V850E2_CACHE_COPR_STRT;
-
-	if (op != OP_WAY_CLEAR) {
-		/* The WAY_CLEAR operation does the whole way, but other
-		   ops take begin-index and count params; we just indicate
-		   the entire cache.  */
-		V850E2_CACHE_CADL = 0;
-		V850E2_CACHE_CADH = 0;
-		V850E2_CACHE_CCNT = V850E2_CACHE_WAY_SIZE - 1;
-	}
-
-	V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(0); /* way 0 */
-	V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(1); /* way 1 */
-	V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(2); /* way 2 */
-	V850E2_CACHE_COPR = cmd | V850E2_CACHE_COPR_WSL(3); /* way 3 */
-}
-
-/* Apply cache-op OP to all entries in CACHE covering addresses ADDR
-   through ADDR+LEN.  */
-static inline void cache_op_range (enum cache_op op, u32 addr, u32 len,
-				   enum cache cache)
-{
-	u32 start = CACHE_LINE_ADDR (addr);
-	u32 end = CACHE_LINE_END_ADDR (addr + len);
-	u32 num_lines = (end - start) >> V850E2_CACHE_LINE_SIZE_BITS;
-
-	V850E2_CACHE_CADL = start & 0xFFFF;
-	V850E2_CACHE_CADH = start >> 16;
-	V850E2_CACHE_CCNT = num_lines - 1;
-
-	V850E2_CACHE_COPR = op | cache | V850E2_CACHE_COPR_STRT;
-}
-
-
-/* High-level ops.  */
-
-static void cache_exec_after_store_all (void)
-{
-	cache_op_all (OP_SYNC_IF_DIRTY, DCACHE);
-	cache_op_all (OP_WAY_CLEAR, ICACHE);
-}
-
-static void cache_exec_after_store_range (u32 start, u32 len)
-{
-	cache_op_range (OP_SYNC_IF_DIRTY, start, len, DCACHE);
-	cache_op_range (OP_CLEAR, start, len, ICACHE);
-}
-
-
-/* Exported functions.  */
-
-void flush_icache (void)
-{
-	cache_exec_after_store_all ();
-}
-
-void flush_icache_range (unsigned long start, unsigned long end)
-{
-	cache_exec_after_store_range (start, end - start);
-}
-
-void flush_icache_page (struct vm_area_struct *vma, struct page *page)
-{
-	cache_exec_after_store_range (page_to_virt (page), PAGE_SIZE);
-}
-
-void flush_icache_user_range (struct vm_area_struct *vma, struct page *page,
-			      unsigned long addr, int len)
-{
-	cache_exec_after_store_range (addr, len);
-}
-
-void flush_cache_sigtramp (unsigned long addr)
-{
-	/* For the exact size, see signal.c, but 16 bytes should be enough.  */
-	cache_exec_after_store_range (addr, 16);
-}
diff --git a/arch/v850/kernel/v850e_cache.c b/arch/v850/kernel/v850e_cache.c
deleted file mode 100644
index ea3e51cfb259..000000000000
--- a/arch/v850/kernel/v850e_cache.c
+++ /dev/null
@@ -1,174 +0,0 @@
-/*
- * arch/v850/kernel/v850e_cache.c -- Cache control for V850E cache memories
- *
- *  Copyright (C) 2003  NEC Electronics Corporation
- *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-/* This file implements cache control for the rather simple cache used on
-   some V850E CPUs, specifically the NB85E/TEG CPU-core and the V850E/ME2
-   CPU.  V850E2 processors have their own (better) cache
-   implementation.  */
-
-#include <asm/entry.h>
-#include <asm/cacheflush.h>
-#include <asm/v850e_cache.h>
-
-#define WAIT_UNTIL_CLEAR(value) while (value) {}
-
-/* Set caching params via the BHC and DCC registers.  */
-void v850e_cache_enable (u16 bhc, u16 icc, u16 dcc)
-{
-	unsigned long *r0_ram = (unsigned long *)R0_RAM_ADDR;
-	register u16 bhc_val asm ("r6") = bhc;
-
-	/* Read the instruction cache control register (ICC) and confirm
-	   that bits 0 and 1 (TCLR0, TCLR1) are all cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-	V850E_CACHE_ICC = icc;
-
-#ifdef V850E_CACHE_DCC
-	/* Configure data-cache.  */
-	V850E_CACHE_DCC = dcc;
-#endif /* V850E_CACHE_DCC */
-
-	/* Configure caching for various memory regions by writing the BHC
-	   register.  The documentation says that an instruction _cannot_
-	   enable/disable caching for the memory region in which the
-	   instruction itself exists; to work around this, we store
-	   appropriate instructions into the on-chip RAM area (which is never
-	   cached), and briefly jump there to do the work.  */
-#ifdef V850E_CACHE_WRITE_IBS
-	*r0_ram++ 	= 0xf0720760;	/* st.h r0, 0xfffff072[r0] */
-#endif
-	*r0_ram++ 	= 0xf06a3760;	/* st.h r6, 0xfffff06a[r0] */
-	*r0_ram 	= 0x5640006b;	/* jmp [r11] */
-
-	asm ("mov hilo(1f), r11; jmp [%1]; 1:;"
-	     :: "r" (bhc_val), "r" (R0_RAM_ADDR) : "r11");
-}
-
-static void clear_icache (void)
-{
-	/* 1. Read the instruction cache control register (ICC) and confirm
-	      that bits 0 and 1 (TCLR0, TCLR1) are all cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-
-	/* 2. Read the ICC register and confirm that bit 12 (LOCK0) is
-  	      cleared.  Bit 13 of the ICC register is always cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x1000);
-
-	/* 3. Set the TCLR0 and TCLR1 bits of the ICC register as follows,
-	      when clearing way 0 and way 1 at the same time:
-	        (a) Set the TCLR0 and TCLR1 bits.
-		(b) Read the TCLR0 and TCLR1 bits to confirm that these bits
-		    are cleared.
-		(c) Perform (a) and (b) above again.  */
-	V850E_CACHE_ICC |= 0x3;
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-
-#ifdef V850E_CACHE_REPEAT_ICC_WRITE
-	/* Do it again.  */
-	V850E_CACHE_ICC |= 0x3;
-	WAIT_UNTIL_CLEAR (V850E_CACHE_ICC & 0x3);
-#endif
-}
-
-#ifdef V850E_CACHE_DCC
-/* Flush or clear (or both) the data cache, depending on the value of FLAGS;
-   the procedure is the same for both, just the control bits used differ (and
-   both may be performed simultaneously).  */
-static void dcache_op (unsigned short flags)
-{
-	/* 1. Read the data cache control register (DCC) and confirm that bits
-	      0, 1, 4, and 5 (DC00, DC01, DC04, DC05) are all cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_DCC & 0x33);
-
-	/* 2. Clear DCC register bit 12 (DC12), bit 13 (DC13), or both
-	      depending on the way for which tags are to be cleared.  */
-	V850E_CACHE_DCC &= ~0xC000;
-
-	/* 3. Set DCC register bit 0 (DC00), bit 1 (DC01) or both depending on
-	      the way for which tags are to be cleared.
-	      ...
-	      Set DCC register bit 4 (DC04), bit 5 (DC05), or both depending
-	      on the way to be data flushed.  */
-	V850E_CACHE_DCC |= flags;
-
-	/* 4. Read DCC register bit DC00, DC01 [DC04, DC05], or both depending
-	      on the way for which tags were cleared [flushed] and confirm
-	      that that bit is cleared.  */
-	WAIT_UNTIL_CLEAR (V850E_CACHE_DCC & flags);
-}
-#endif /* V850E_CACHE_DCC */
-
-/* Flushes the contents of the dcache to memory.  */
-static inline void flush_dcache (void)
-{
-#ifdef V850E_CACHE_DCC
-	/* We only need to do something if in write-back mode.  */
-	if (V850E_CACHE_DCC & 0x0400)
-		dcache_op (0x30);
-#endif /* V850E_CACHE_DCC */
-}
-
-/* Flushes the contents of the dcache to memory, and then clears it.  */
-static inline void clear_dcache (void)
-{
-#ifdef V850E_CACHE_DCC
-	/* We only need to do something if the dcache is enabled.  */
-	if (V850E_CACHE_DCC & 0x0C00)
-		dcache_op (0x33);
-#endif /* V850E_CACHE_DCC */
-}
-
-/* Clears the dcache without flushing to memory first.  */
-static inline void clear_dcache_no_flush (void)
-{
-#ifdef V850E_CACHE_DCC
-	/* We only need to do something if the dcache is enabled.  */
-	if (V850E_CACHE_DCC & 0x0C00)
-		dcache_op (0x3);
-#endif /* V850E_CACHE_DCC */
-}
-
-static inline void cache_exec_after_store (void)
-{
-	flush_dcache ();
-	clear_icache ();
-}
-
-
-/* Exported functions.  */
-
-void flush_icache (void)
-{
-	cache_exec_after_store ();
-}
-
-void flush_icache_range (unsigned long start, unsigned long end)
-{
-	cache_exec_after_store ();
-}
-
-void flush_icache_page (struct vm_area_struct *vma, struct page *page)
-{
-	cache_exec_after_store ();
-}
-
-void flush_icache_user_range (struct vm_area_struct *vma, struct page *page,
-			      unsigned long adr, int len)
-{
-	cache_exec_after_store ();
-}
-
-void flush_cache_sigtramp (unsigned long addr)
-{
-	cache_exec_after_store ();
-}
diff --git a/arch/v850/kernel/v850e_intc.c b/arch/v850/kernel/v850e_intc.c
deleted file mode 100644
index 8d39a52ee6d1..000000000000
--- a/arch/v850/kernel/v850e_intc.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * arch/v850/kernel/v850e_intc.c -- V850E interrupt controller (INTC)
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-
-#include <asm/v850e_intc.h>
-
-static void irq_nop (unsigned irq) { }
-
-static unsigned v850e_intc_irq_startup (unsigned irq)
-{
-	v850e_intc_clear_pending_irq (irq);
-	v850e_intc_enable_irq (irq);
-	return 0;
-}
-
-static void v850e_intc_end_irq (unsigned irq)
-{
-	unsigned long psw, temp;
-
-	/* Clear the highest-level bit in the In-service priority register
-	   (ISPR), to allow this interrupt (or another of the same or
-	   lesser priority) to happen again.
-
-	   The `reti' instruction normally does this automatically when the
-	   PSW bits EP and NP are zero, but we can't always rely on reti
-	   being used consistently to return after an interrupt (another
-	   process can be scheduled, for instance, which can delay the
-	   associated reti for a long time, or this process may be being
-	   single-stepped, which uses the `dbret' instruction to return
-	   from the kernel).
-
-	   We also set the PSW EP bit, which prevents reti from also
-	   trying to modify the ISPR itself.  */
-
-	/* Get PSW and disable interrupts.  */
-	asm volatile ("stsr psw, %0; di" : "=r" (psw));
-	/* We don't want to do anything for NMIs (they don't use the ISPR).  */
-	if (! (psw & 0xC0)) {
-		/* Transition to `trap' state, so that an eventual real
-		   reti instruction won't modify the ISPR.  */
-		psw |= 0x40;
-		/* Fake an interrupt return, which automatically clears the
-		   appropriate bit in the ISPR.  */
-		asm volatile ("mov hilo(1f), %0;"
-			      "ldsr %0, eipc; ldsr %1, eipsw;"
-			      "reti;"
-			      "1:"
-			      : "=&r" (temp) : "r" (psw));
-	}
-}
-
-/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
-   INITS (which is terminated by an entry with the name field == 0).  */
-void __init v850e_intc_init_irq_types (struct v850e_intc_irq_init *inits,
-				       struct hw_interrupt_type *hw_irq_types)
-{
-	struct v850e_intc_irq_init *init;
-	for (init = inits; init->name; init++) {
-		unsigned i;
-		struct hw_interrupt_type *hwit = hw_irq_types++;
-
-		hwit->typename = init->name;
-
-		hwit->startup  = v850e_intc_irq_startup;
-		hwit->shutdown = v850e_intc_disable_irq;
-		hwit->enable   = v850e_intc_enable_irq;
-		hwit->disable  = v850e_intc_disable_irq;
-		hwit->ack      = irq_nop;
-		hwit->end      = v850e_intc_end_irq;
-		
-		/* Initialize kernel IRQ infrastructure for this interrupt.  */
-		init_irq_handlers(init->base, init->num, init->interval, hwit);
-
-		/* Set the interrupt priorities.  */
-		for (i = 0; i < init->num; i++) {
-			unsigned irq = init->base + i * init->interval;
-
-			/* If the interrupt is currently enabled (all
-			   interrupts are initially disabled), then
-			   assume whoever enabled it has set things up
-			   properly, and avoid messing with it.  */
-			if (! v850e_intc_irq_enabled (irq))
-				/* This write also (1) disables the
-				   interrupt, and (2) clears any pending
-				   interrupts.  */
-				V850E_INTC_IC (irq)
-					= (V850E_INTC_IC_PR (init->priority)
-					   | V850E_INTC_IC_MK);
-		}
-	}
-}
diff --git a/arch/v850/kernel/v850e_timer_d.c b/arch/v850/kernel/v850e_timer_d.c
deleted file mode 100644
index d2a4ece2574c..000000000000
--- a/arch/v850/kernel/v850e_timer_d.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * include/asm-v850/v850e_timer_d.c -- `Timer D' component often used
- *	with V850E CPUs
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/kernel.h>
-
-#include <asm/v850e_utils.h>
-#include <asm/v850e_timer_d.h>
-
-/* Start interval timer TIMER (0-3).  The timer will issue the
-   corresponding INTCMD interrupt RATE times per second.
-   This function does not enable the interrupt.  */
-void v850e_timer_d_configure (unsigned timer, unsigned rate)
-{
-	unsigned divlog2, count;
-
-	/* Calculate params for timer.  */
-	if (! calc_counter_params (
-		    V850E_TIMER_D_BASE_FREQ, rate,
-		    V850E_TIMER_D_TMCD_CS_MIN, V850E_TIMER_D_TMCD_CS_MAX, 16,
-		    &divlog2, &count))
-		printk (KERN_WARNING
-			"Cannot find interval timer %d setting suitable"
-			" for rate of %dHz.\n"
-			"Using rate of %dHz instead.\n",
-			timer, rate,
-			(V850E_TIMER_D_BASE_FREQ >> divlog2) >> 16);
-
-	/* Do the actual hardware timer initialization:  */
-
-	/* Enable timer.  */
-	V850E_TIMER_D_TMCD(timer) = V850E_TIMER_D_TMCD_CAE;
-	/* Set clock divider.  */
-	V850E_TIMER_D_TMCD(timer)
-		= V850E_TIMER_D_TMCD_CAE
-		| V850E_TIMER_D_TMCD_CS(divlog2);
-	/* Set timer compare register.  */
-	V850E_TIMER_D_CMD(timer) = count;
-	/* Start counting.  */
-	V850E_TIMER_D_TMCD(timer)
-		= V850E_TIMER_D_TMCD_CAE
-		| V850E_TIMER_D_TMCD_CS(divlog2)
-		| V850E_TIMER_D_TMCD_CE;
-}
diff --git a/arch/v850/kernel/v850e_utils.c b/arch/v850/kernel/v850e_utils.c
deleted file mode 100644
index e6807ef8dee6..000000000000
--- a/arch/v850/kernel/v850e_utils.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-v850/v850e_utils.h -- Utility functions associated with
- *	V850E CPUs
- *
- *  Copyright (C) 2001,02,03  NEC Electronics Corporation
- *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <asm/v850e_utils.h>
-
-/* Calculate counter clock-divider and count values to attain the
-   desired frequency RATE from the base frequency BASE_FREQ.  The
-   counter is expected to have a clock-divider, which can divide the
-   system cpu clock by a power of two value from MIN_DIVLOG2 to
-   MAX_DIV_LOG2, and a word-size of COUNTER_SIZE bits (the counter
-   counts up and resets whenever it's equal to the compare register,
-   generating an interrupt or whatever when it does so).  The returned
-   values are: *DIVLOG2 -- log2 of the desired clock divider and *COUNT
-   -- the counter compare value to use.  Returns true if it was possible
-   to find a reasonable value, otherwise false (and the other return
-   values will be set to be as good as possible).  */
-int calc_counter_params (unsigned long base_freq,
-			 unsigned long rate,
-			 unsigned min_divlog2, unsigned max_divlog2,
-			 unsigned counter_size,
-			 unsigned *divlog2, unsigned *count)
-{
-	unsigned _divlog2;
-	int ok = 0;
-
-	/* Find the lowest clock divider setting that can represent RATE.  */
-	for (_divlog2 = min_divlog2; _divlog2 <= max_divlog2; _divlog2++) {
-		/* Minimum interrupt rate possible using this divider.  */
-		unsigned min_int_rate
-			= (base_freq >> _divlog2) >> counter_size;
-
-		if (min_int_rate <= rate) {
-			/* This setting is the highest resolution
-			   setting that's slow enough enough to attain
-			   RATE interrupts per second, so use it.  */
-			ok = 1;
-			break;
-		}
-	}
-
-	if (_divlog2 > max_divlog2)
-		/* Can't find correct setting.  */
-		_divlog2 = max_divlog2;
-
-	if (divlog2)
-		*divlog2 = _divlog2;
-	if (count)
-		*count = ((base_freq >> _divlog2) + rate/2) / rate;
-
-	return ok;
-}
diff --git a/arch/v850/kernel/vmlinux.lds.S b/arch/v850/kernel/vmlinux.lds.S
deleted file mode 100644
index d08cd1d27f27..000000000000
--- a/arch/v850/kernel/vmlinux.lds.S
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * arch/v850/vmlinux.lds.S -- kernel linker script for v850 platforms
- *
- *  Copyright (C) 2002,03,04,05  NEC Electronics Corporation
- *  Copyright (C) 2002,03,04,05  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-
-#define VMLINUX_SYMBOL(_sym_) _##_sym_
-#include <asm-generic/vmlinux.lds.h>
-
-/* For most platforms, this will define useful things like RAM addr/size.  */
-#include <asm/machdep.h>
-
-
-/* The following macros contain the usual definitions for various data areas.
-   The prefix `RAMK_' is used to indicate macros suitable for kernels loaded
-   into RAM, and similarly `ROMK_' for ROM-resident kernels.  Note that all
-   symbols are prefixed with an extra `_' for compatibility with the v850
-   toolchain.  */
-
-	
-/* Interrupt vectors.  */
-#define INTV_CONTENTS							      \
-		. = ALIGN (0x10) ;					      \
-		__intv_start = . ;					      \
-			*(.intv.reset)	/* Reset vector */		      \
-		. = __intv_start + 0x10 ;				      \
-			*(.intv.common)	/* Vectors common to all v850e proc */\
-		. = __intv_start + 0x80 ;				      \
-			*(.intv.mach)	/* Machine-specific int. vectors.  */ \
-		__intv_end = . ;
-
-#define RODATA_CONTENTS							      \
-		. = ALIGN (16) ;					      \
-			*(.rodata) *(.rodata.*)				      \
-			*(__vermagic)		/* Kernel version magic */    \
-			*(.rodata1)					      \
-		/* PCI quirks */					      \
-		___start_pci_fixups_early = . ;				      \
-			*(.pci_fixup_early)				      \
-		___end_pci_fixups_early = . ;				      \
-		___start_pci_fixups_header = . ;			      \
-			*(.pci_fixup_header)				      \
-		___end_pci_fixups_header = . ;				      \
-		___start_pci_fixups_final = . ;				      \
-			*(.pci_fixup_final)				      \
-		___end_pci_fixups_final = . ;				      \
-		___start_pci_fixups_enable = . ;			      \
-			*(.pci_fixup_enable)				      \
-		___end_pci_fixups_enable = . ;				      \
-		/* Kernel symbol table: Normal symbols */		      \
-		___start___ksymtab = .;					      \
-			*(__ksymtab)					      \
-		___stop___ksymtab = .;					      \
-		/* Kernel symbol table: GPL-only symbols */		      \
-		___start___ksymtab_gpl = .;				      \
-			*(__ksymtab_gpl)				      \
-		___stop___ksymtab_gpl = .;				      \
-		/* Kernel symbol table: GPL-future symbols */		      \
-		___start___ksymtab_gpl_future = .;			      \
-			*(__ksymtab_gpl_future)				      \
-		___stop___ksymtab_gpl_future = .;			      \
-		/* Kernel symbol table: strings */			      \
-			*(__ksymtab_strings)				      \
-		/* Kernel symbol table: Normal symbols */		      \
-		___start___kcrctab = .;					      \
-			*(__kcrctab)					      \
-		___stop___kcrctab = .;					      \
-		/* Kernel symbol table: GPL-only symbols */		      \
-		___start___kcrctab_gpl = .;				      \
-			*(__kcrctab_gpl)				      \
-		___stop___kcrctab_gpl = .;				      \
-		/* Kernel symbol table: GPL-future symbols */		      \
-		___start___kcrctab_gpl_future = .;			      \
-			*(__kcrctab_gpl_future)				      \
-		___stop___kcrctab_gpl_future = .;			      \
-		/* Built-in module parameters */			      \
-		. = ALIGN (4) ;						      \
-		___start___param = .;					      \
-		*(__param)						      \
-		___stop___param = .;
-
-
-/* Kernel text segment, and some constant data areas.  */
-#define TEXT_CONTENTS							      \
-		_text = .;						      \
-		__stext = . ;						      \
-		TEXT_TEXT						      \
-		SCHED_TEXT						      \
-			*(.exit.text)	/* 2.5 convention */		      \
-			*(.text.exit)	/* 2.4 convention */		      \
-			*(.text.lock)					      \
-			*(.exitcall.exit)				      \
-		__real_etext = . ;	/* There may be data after here.  */  \
-		RODATA_CONTENTS						      \
-		. = ALIGN (4) ;						      \
-		    	*(.call_table_data)				      \
-			*(.call_table_text)				      \
-		. = ALIGN (16) ;	/* Exception table.  */		      \
-		___start___ex_table = . ;				      \
-			*(__ex_table)					      \
-		___stop___ex_table = . ;				      \
-		. = ALIGN (4) ;						      \
-		__etext = . ;
-
-/* Kernel data segment.  */
-#define DATA_CONTENTS							      \
-		__sdata = . ;						      \
-		DATA_DATA						      \
-			EXIT_DATA	/* 2.5 convention */		      \
-			*(.data.exit)	/* 2.4 convention */		      \
-		. = ALIGN (16) ;					      \
-		*(.data.cacheline_aligned)				      \
-		. = ALIGN (0x2000) ;					      \
-        	*(.data.init_task)					      \
-		. = ALIGN (0x2000) ;					      \
-		__edata = . ;
-
-/* Kernel BSS segment.  */
-#define BSS_CONTENTS							      \
-		__sbss = . ;						      \
-			*(.bss)						      \
-			*(COMMON)					      \
-		. = ALIGN (4) ;						      \
-		__init_stack_end = . ;					      \
-		__ebss = . ;
-
-/* `initcall' tables.  */
-#define INITCALL_CONTENTS						      \
-		. = ALIGN (16) ;					      \
-		___setup_start = . ;					      \
-			*(.init.setup)	/* 2.5 convention */		      \
-			*(.setup.init)	/* 2.4 convention */		      \
-		___setup_end = . ;					      \
-		___initcall_start = . ;					      \
-			*(.initcall.init)				      \
-			INITCALLS					      \
-		. = ALIGN (4) ;						      \
-		___initcall_end = . ;					      \
-		___con_initcall_start = .;				      \
-			*(.con_initcall.init)				      \
-		___con_initcall_end = .;
-
-/* Contents of `init' section for a kernel that's loaded into RAM.  */
-#define RAMK_INIT_CONTENTS						      \
-		RAMK_INIT_CONTENTS_NO_END				      \
-		__init_end = . ;
-/* Same as RAMK_INIT_CONTENTS, but doesn't define the `__init_end' symbol.  */
-#define RAMK_INIT_CONTENTS_NO_END					      \
-		. = ALIGN (4096) ;					      \
-		__init_start = . ;					      \
-			__sinittext = .;				      \
-			INIT_TEXT	/* 2.5 convention */		      \
-			__einittext = .;				      \
-			INIT_DATA					      \
-			*(.text.init)	/* 2.4 convention */		      \
-			*(.data.init)					      \
-		INITCALL_CONTENTS					      \
-		INITRAMFS_CONTENTS
-
-/* The contents of `init' section for a ROM-resident kernel which
-   should go into RAM.  */	
-#define ROMK_INIT_RAM_CONTENTS						      \
-		. = ALIGN (4096) ;					      \
-		__init_start = . ;					      \
-			INIT_DATA	/* 2.5 convention */		      \
-			*(.data.init)	/* 2.4 convention */		      \
-		__init_end = . ;					      \
-		. = ALIGN (4096) ;
-
-/* The contents of `init' section for a ROM-resident kernel which
-   should go into ROM.  */	
-#define ROMK_INIT_ROM_CONTENTS						      \
-			_sinittext = .;					      \
-			INIT_TEXT	/* 2.5 convention */		      \
-			_einittext = .;					      \
-			*(.text.init)	/* 2.4 convention */		      \
-		INITCALL_CONTENTS					      \
-		INITRAMFS_CONTENTS
-
-/* A root filesystem image, for kernels with an embedded root filesystem.  */
-#define ROOT_FS_CONTENTS						      \
-		__root_fs_image_start = . ;				      \
-		*(.root)						      \
-		__root_fs_image_end = . ;
-
-#ifdef CONFIG_BLK_DEV_INITRD
-/* The initramfs archive.  */
-#define INITRAMFS_CONTENTS						      \
-		. = ALIGN (4) ;						      \
-		___initramfs_start = . ;				      \
-			*(.init.ramfs)					      \
-		___initramfs_end = . ;
-#endif
-
-/* Where the initial bootmap (bitmap for the boot-time memory allocator) 
-   should be place.  */
-#define BOOTMAP_CONTENTS						      \
-		. = ALIGN (4096) ;					      \
-		__bootmap = . ;						      \
-		. = . + 4096 ;		/* enough for 128MB.   */
-
-/* The contents of a `typical' kram area for a kernel in RAM.  */
-#define RAMK_KRAM_CONTENTS						      \
-		__kram_start = . ;					      \
-		TEXT_CONTENTS						      \
-		DATA_CONTENTS						      \
-		BSS_CONTENTS						      \
-		RAMK_INIT_CONTENTS					      \
-		__kram_end = . ;					      \
-		BOOTMAP_CONTENTS
-
-
-/* Define output sections normally used for a ROM-resident kernel.  
-   ROM and RAM should be appropriate memory areas to use for kernel
-   ROM and RAM data.  This assumes that ROM starts at 0 (and thus can
-   hold the interrupt vectors).  */
-#define ROMK_SECTIONS(ROM, RAM)						      \
-	.rom : {							      \
-		INTV_CONTENTS						      \
-		TEXT_CONTENTS						      \
-		ROMK_INIT_ROM_CONTENTS					      \
-		ROOT_FS_CONTENTS					      \
-	} > ROM								      \
-									      \
-	__rom_copy_src_start = . ;					      \
-									      \
-	.data : {							      \
-		__kram_start = . ;					      \
-		__rom_copy_dst_start = . ;				      \
-		DATA_CONTENTS						      \
-		ROMK_INIT_RAM_CONTENTS					      \
-		__rom_copy_dst_end = . ;				      \
-	} > RAM  AT> ROM						      \
-									      \
-	.bss ALIGN (4) : {						      \
-		BSS_CONTENTS						      \
-		__kram_end = . ;					      \
-		BOOTMAP_CONTENTS					      \
-	} > RAM
-
-
-/* The 32-bit variable `jiffies' is just the lower 32-bits of `jiffies_64'.  */
-_jiffies = _jiffies_64 ;
-
-
-/* Include an appropriate platform-dependent linker-script (which
-   usually should use the above macros to do most of the work).  */
-
-#ifdef CONFIG_V850E_SIM
-# include "sim.ld"
-#endif
-
-#ifdef CONFIG_V850E2_SIM85E2
-# include "sim85e2.ld"
-#endif
-
-#ifdef CONFIG_V850E2_FPGA85E2C
-# include "fpga85e2c.ld"
-#endif
-
-#ifdef CONFIG_V850E2_ANNA
-# ifdef CONFIG_ROM_KERNEL
-#  include "anna-rom.ld"
-# else
-#  include "anna.ld"
-# endif
-#endif
-
-#ifdef CONFIG_V850E_AS85EP1
-# ifdef CONFIG_ROM_KERNEL
-#  include "as85ep1-rom.ld"
-# else
-#  include "as85ep1.ld"
-# endif
-#endif
-
-#ifdef CONFIG_RTE_CB_MA1
-# ifdef CONFIG_ROM_KERNEL
-#  include "rte_ma1_cb-rom.ld"
-# else
-#  include "rte_ma1_cb.ld"
-# endif
-#endif
-
-#ifdef CONFIG_RTE_CB_NB85E
-# ifdef CONFIG_ROM_KERNEL
-#  include "rte_nb85e_cb-rom.ld"
-# elif defined(CONFIG_RTE_CB_MULTI)
-#  include "rte_nb85e_cb-multi.ld"
-# else
-#  include "rte_nb85e_cb.ld"
-# endif
-#endif
-
-#ifdef CONFIG_RTE_CB_ME2
-#  include "rte_me2_cb.ld"
-#endif
-
diff --git a/arch/v850/lib/Makefile b/arch/v850/lib/Makefile
deleted file mode 100644
index 1c78b728a117..000000000000
--- a/arch/v850/lib/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-#
-# arch/v850/lib/Makefile
-#
-
-lib-y  = ashrdi3.o ashldi3.o lshrdi3.o muldi3.o negdi2.o \
-	 checksum.o memcpy.o memset.o
diff --git a/arch/v850/lib/ashldi3.c b/arch/v850/lib/ashldi3.c
deleted file mode 100644
index 9e792d53f0e4..000000000000
--- a/arch/v850/lib/ashldi3.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* ashldi3.c extracted from gcc-2.95.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 92-98, 1999 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__ashldi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      w.s.low = 0;
-      w.s.high = (USItype)uu.s.low << -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.low >> bm;
-      w.s.low = (USItype)uu.s.low << b;
-      w.s.high = ((USItype)uu.s.high << b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/ashrdi3.c b/arch/v850/lib/ashrdi3.c
deleted file mode 100644
index 78efb65e315a..000000000000
--- a/arch/v850/lib/ashrdi3.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/* ashrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__ashrdi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      /* w.s.high = 1..1 or 0..0 */
-      w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1);
-      w.s.low = uu.s.high >> -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.high << bm;
-      w.s.high = uu.s.high >> b;
-      w.s.low = ((USItype)uu.s.low >> b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/checksum.c b/arch/v850/lib/checksum.c
deleted file mode 100644
index 042158dfe17a..000000000000
--- a/arch/v850/lib/checksum.c
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * INET		An implementation of the TCP/IP protocol suite for the LINUX
- *		operating system.  INET is implemented using the  BSD Socket
- *		interface as the means of communication with the user level.
- *
- *		MIPS specific IP/TCP/UDP checksumming routines
- *
- * Authors:	Ralf Baechle, <ralf@waldorf-gmbh.de>
- *		Lots of code moved from tcp.c and ip.c; see those files
- *		for more names.
- *
- *		This program is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
- *
- * $Id: checksum.c,v 1.1 2002/09/28 14:58:40 gerg Exp $
- */
-#include <net/checksum.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <asm/string.h>
-#include <asm/uaccess.h>
-
-static inline unsigned short from32to16 (unsigned long sum)
-{
-	unsigned int result;
-	/*
-			        %0		%1
-	      hsw %1, %0	H     L		L     H
-	      add %1, %0	H     L		H+L+C H+L
-	*/
-	asm ("hsw %1, %0; add %1, %0" : "=&r" (result) : "r" (sum));
-	return result >> 16;
-}
-
-static inline unsigned int do_csum(const unsigned char * buff, int len)
-{
-	int odd, count;
-	unsigned int result = 0;
-
-	if (len <= 0)
-		goto out;
-	odd = 1 & (unsigned long) buff;
-	if (odd) {
-		result = be16_to_cpu(*buff);
-		len--;
-		buff++;
-	}
-	count = len >> 1;		/* nr of 16-bit words.. */
-	if (count) {
-		if (2 & (unsigned long) buff) {
-			result += *(unsigned short *) buff;
-			count--;
-			len -= 2;
-			buff += 2;
-		}
-		count >>= 1;		/* nr of 32-bit words.. */
-		if (count) {
-			unsigned int carry = 0;
-			do {
-				unsigned int w = *(unsigned int *) buff;
-				count--;
-				buff += 4;
-				result += carry;
-				result += w;
-				carry = (w > result);
-			} while (count);
-			result += carry;
-			result = (result & 0xffff) + (result >> 16);
-		}
-		if (len & 2) {
-			result += *(unsigned short *) buff;
-			buff += 2;
-		}
-	}
-	if (len & 1)
-		result += le16_to_cpu(*buff);
-	result = from32to16(result);
-	if (odd)
-		result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
-out:
-	return result;
-}
-
-/*
- *	This is a version of ip_compute_csum() optimized for IP headers,
- *	which always checksum on 4 octet boundaries.
- */
-__sum16 ip_fast_csum(const void *iph, unsigned int ihl)
-{
-	return (__force __sum16)~do_csum(iph,ihl*4);
-}
-
-/*
- * this routine is used for miscellaneous IP-like checksums, mainly
- * in icmp.c
- */
-__sum16 ip_compute_csum(const void *buff, int len)
-{
-	return (__force __sum16)~do_csum(buff,len);
-}
-
-/*
- * computes a partial checksum, e.g. for TCP/UDP fragments
- */
-__wsum csum_partial(const void *buff, int len, __wsum sum)
-{
-	unsigned int result = do_csum(buff, len);
-
-	/* add in old sum, and carry.. */
-	result += (__force u32)sum;
-	if ((__force u32)sum > result)
-		result += 1;
-	return (__force __wsum)result;
-}
-
-EXPORT_SYMBOL(csum_partial);
-
-/*
- * copy while checksumming, otherwise like csum_partial
- */
-__wsum csum_partial_copy_nocheck(const void *src, void *dst,
-                               int len, __wsum sum)
-{
-	/*
-	 * It's 2:30 am and I don't feel like doing it real ...
-	 * This is lots slower than the real thing (tm)
-	 */
-	sum = csum_partial(src, len, sum);
-	memcpy(dst, src, len);
-
-	return sum;
-}
-
-/*
- * Copy from userspace and compute checksum.  If we catch an exception
- * then zero the rest of the buffer.
- */
-__wsum csum_partial_copy_from_user (const void *src,
-					  void *dst,
-                                          int len, __wsum sum,
-                                          int *err_ptr)
-{
-	int missing;
-
-	missing = copy_from_user(dst, src, len);
-	if (missing) {
-		memset(dst + len - missing, 0, missing);
-		*err_ptr = -EFAULT;
-	}
-		
-	return csum_partial(dst, len, sum);
-}
diff --git a/arch/v850/lib/lshrdi3.c b/arch/v850/lib/lshrdi3.c
deleted file mode 100644
index 93b1cb6fdee8..000000000000
--- a/arch/v850/lib/lshrdi3.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* lshrdi3.c extracted from gcc-2.7.2/libgcc2.c which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define BITS_PER_UNIT 8
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__lshrdi3 (DItype u, word_type b)
-{
-  DIunion w;
-  word_type bm;
-  DIunion uu;
-
-  if (b == 0)
-    return u;
-
-  uu.ll = u;
-
-  bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
-  if (bm <= 0)
-    {
-      w.s.high = 0;
-      w.s.low = (USItype)uu.s.high >> -bm;
-    }
-  else
-    {
-      USItype carries = (USItype)uu.s.high << bm;
-      w.s.high = (USItype)uu.s.high >> b;
-      w.s.low = ((USItype)uu.s.low >> b) | carries;
-    }
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/memcpy.c b/arch/v850/lib/memcpy.c
deleted file mode 100644
index 492847b3e612..000000000000
--- a/arch/v850/lib/memcpy.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * arch/v850/lib/memcpy.c -- Memory copying
- *
- *  Copyright (C) 2001,02  NEC Corporation
- *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/types.h>
-#include <asm/string.h>
-
-#define CHUNK_SIZE		32 /* bytes */
-#define CHUNK_ALIGNED(addr)	(((unsigned long)addr & 0x3) == 0)
-
-/* Note that this macro uses 8 call-clobbered registers (not including
-   R1), which are few enough so that the following functions don't need
-   to spill anything to memory.  It also uses R1, which is nominally
-   reserved for the assembler, but here it should be OK.  */
-#define COPY_CHUNK(src, dst)			\
-   asm ("mov %0, ep;"				\
-	"sld.w 0[ep], r1; sld.w 4[ep], r12;"	\
-	"sld.w 8[ep], r13; sld.w 12[ep], r14;"	\
-	"sld.w 16[ep], r15; sld.w 20[ep], r17;"	\
-	"sld.w 24[ep], r18; sld.w 28[ep], r19;"	\
-	"mov %1, ep;"				\
-	"sst.w r1, 0[ep]; sst.w r12, 4[ep];"	\
-	"sst.w r13, 8[ep]; sst.w r14, 12[ep];"	\
-	"sst.w r15, 16[ep]; sst.w r17, 20[ep];"	\
-	"sst.w r18, 24[ep]; sst.w r19, 28[ep]"	\
-	:: "r" (src), "r" (dst)			\
-	: "r1", "r12", "r13", "r14", "r15",	\
-	  "r17", "r18", "r19", "ep", "memory");
-
-void *memcpy (void *dst, const void *src, __kernel_size_t size)
-{
-	char *_dst = dst;
-	const char *_src = src;
-
-	if (size >= CHUNK_SIZE && CHUNK_ALIGNED(_src) && CHUNK_ALIGNED(_dst)) {
-		/* Copy large blocks efficiently.  */
-		unsigned count;
-		for (count = size / CHUNK_SIZE; count; count--) {
-			COPY_CHUNK (_src, _dst);
-			_src += CHUNK_SIZE;
-			_dst += CHUNK_SIZE;
-		}
-		size %= CHUNK_SIZE;
-	}
-
-	if (size > 0)
-		do
-			*_dst++ = *_src++;
-		while (--size);
-
-	return dst;
-}
-
-void *memmove (void *dst, const void *src, __kernel_size_t size)
-{
-	if ((unsigned long)dst < (unsigned long)src
-	    || (unsigned long)src + size < (unsigned long)dst)
-		return memcpy (dst, src, size);
-	else {
-		char *_dst = dst + size;
-		const char *_src = src + size;
-
-		if (size >= CHUNK_SIZE
-		    && CHUNK_ALIGNED (_src) && CHUNK_ALIGNED (_dst))
-		{
-			/* Copy large blocks efficiently.  */
-			unsigned count;
-			for (count = size / CHUNK_SIZE; count; count--) {
-				_src -= CHUNK_SIZE;
-				_dst -= CHUNK_SIZE;
-				COPY_CHUNK (_src, _dst);
-			}
-			size %= CHUNK_SIZE;
-		}
-
-		if (size > 0)
-			do
-				*--_dst = *--_src;
-			while (--size);
-
-		return _dst;
-	}
-}
diff --git a/arch/v850/lib/memset.c b/arch/v850/lib/memset.c
deleted file mode 100644
index d1b2ad821b15..000000000000
--- a/arch/v850/lib/memset.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * arch/v850/lib/memset.c -- Memory initialization
- *
- *  Copyright (C) 2001,02,04  NEC Corporation
- *  Copyright (C) 2001,02,04  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-#include <linux/types.h>
-
-void *memset (void *dst, int val, __kernel_size_t count)
-{
-	if (count) {
-		register unsigned loop;
-		register void *ptr asm ("ep") = dst;
-
-		/* replicate VAL into a long.  */
-		val &= 0xff;
-		val |= val << 8;
-		val |= val << 16;
-
-		/* copy initial unaligned bytes.  */
-		if ((long)ptr & 1) {
-			*(char *)ptr = val;
-			ptr = (void *)((char *)ptr + 1);
-			count--;
-		}
-		if (count > 2 && ((long)ptr & 2)) {
-			*(short *)ptr = val;
-			ptr = (void *)((short *)ptr + 1);
-			count -= 2;
-		}
-
-		/* 32-byte copying loop.  */
-		for (loop = count / 32; loop; loop--) {
-			asm ("sst.w %0, 0[ep]; sst.w %0, 4[ep];"
-			     "sst.w %0, 8[ep]; sst.w %0, 12[ep];"
-			     "sst.w %0, 16[ep]; sst.w %0, 20[ep];"
-			     "sst.w %0, 24[ep]; sst.w %0, 28[ep]"
-			     :: "r" (val) : "memory");
-			ptr += 32;
-		}
-		count %= 32;
-
-		/* long copying loop.  */
-		for (loop = count / 4; loop; loop--) {
-			*(long *)ptr = val;
-			ptr = (void *)((long *)ptr + 1);
-		}
-		count %= 4;
-
-		/* finish up with any trailing bytes.  */
-		if (count & 2) {
-			*(short *)ptr = val;
-			ptr = (void *)((short *)ptr + 1);
-		}
-		if (count & 1) {
-			*(char *)ptr = val;
-		}
-	}
-
-	return dst;
-}
diff --git a/arch/v850/lib/muldi3.c b/arch/v850/lib/muldi3.c
deleted file mode 100644
index 277ca25c82c8..000000000000
--- a/arch/v850/lib/muldi3.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/* muldi3.c extracted from gcc-2.7.2.3/libgcc2.c and 
-			   gcc-2.7.2.3/longlong.h which is: */
-/* Copyright (C) 1989, 1992, 1993, 1994, 1995, 2001 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING.  If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA.  */
-
-#define umul_ppmm(w1, w0, u, v) \
-  __asm__ ("mulu %3, %0, %1"						\
-           : "=r" ((USItype)(w0)),					\
-             "=r" ((USItype)(w1))					\
-           : "%0" ((USItype)(u)),					\
-             "r" ((USItype)(v)))
-
-#define __umulsidi3(u, v) \
-  ({DIunion __w;							\
-    umul_ppmm (__w.s.high, __w.s.low, u, v);				\
-    __w.ll; })
-
-typedef 	 int SItype	__attribute__ ((mode (SI)));
-typedef unsigned int USItype	__attribute__ ((mode (SI)));
-typedef		 int DItype	__attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct DIstruct {SItype high, low;};
-
-typedef union
-{
-  struct DIstruct s;
-  DItype ll;
-} DIunion;
-
-DItype
-__muldi3 (DItype u, DItype v)
-{
-  DIunion w;
-  DIunion uu, vv;
-
-  uu.ll = u,
-  vv.ll = v;
-
-  w.ll = __umulsidi3 (uu.s.low, vv.s.low);
-  w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high
-	       + (USItype) uu.s.high * (USItype) vv.s.low);
-
-  return w.ll;
-}
diff --git a/arch/v850/lib/negdi2.c b/arch/v850/lib/negdi2.c
deleted file mode 100644
index 571e04fc619a..000000000000
--- a/arch/v850/lib/negdi2.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/v850/lib/negdi2.c -- 64-bit negation
- *
- *  Copyright (C) 2001  NEC Corporation
- *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
- *
- * This file is subject to the terms and conditions of the GNU General
- * Public License.  See the file COPYING in the main directory of this
- * archive for more details.
- *
- * Written by Miles Bader <miles@gnu.org>
- */
-
-typedef		 int DItype	__attribute__ ((mode (DI)));
-
-DItype __negdi2 (DItype x)
-{
-	__asm__ __volatile__
-		("not	r6, r10;"
-		 "add	1, r10;"
-		 "setf	c, r6;"
-		 "not	r7, r11;"
-		 "add	r6, r11"
-		 ::: "r6", "r7", "r10", "r11");
-}
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 2642b4bf41b9..3d0f2b6a5a16 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -21,12 +21,17 @@ config X86
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_IDE
 	select HAVE_OPROFILE
+	select HAVE_IOREMAP_PROT
+	select HAVE_GET_USER_PAGES_FAST
 	select HAVE_KPROBES
+	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select HAVE_KRETPROBES
 	select HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE
 	select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
 	select HAVE_ARCH_KGDB if !X86_VOYAGER
+	select HAVE_GENERIC_DMA_COHERENT if X86_32
+	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 
 config ARCH_DEFCONFIG
 	string
@@ -170,6 +175,7 @@ config GENERIC_PENDING_IRQ
 config X86_SMP
 	bool
 	depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64)
+	select USE_GENERIC_SMP_HELPERS
 	default y
 
 config X86_32_SMP
@@ -328,20 +334,6 @@ config X86_BIGSMP
 
 endif
 
-config X86_RDC321X
-	bool "RDC R-321x SoC"
-	depends on X86_32
-	select M486
-	select X86_REBOOTFIXUPS
-	select GENERIC_GPIO
-	select LEDS_CLASS
-	select LEDS_GPIO
-	select NEW_LEDS
-	help
-	  This option is needed for RDC R-321x system-on-chip, also known
-	  as R-8610-(G).
-	  If you don't have one of these chips, you should say N here.
-
 config X86_VSMP
 	bool "Support for ScaleMP vSMP"
 	select PARAVIRT
@@ -365,6 +357,16 @@ config X86_VISWS
 	  A kernel compiled for the Visual Workstation will run on general
 	  PCs as well. See <file:Documentation/sgi-visws.txt> for details.
 
+config X86_RDC321X
+	bool "RDC R-321x SoC"
+	depends on X86_32
+	select M486
+	select X86_REBOOTFIXUPS
+	help
+	  This option is needed for RDC R-321x system-on-chip, also known
+	  as R-8610-(G).
+	  If you don't have one of these chips, you should say N here.
+
 config SCHED_NO_NO_OMIT_FRAME_POINTER
 	def_bool y
 	prompt "Single-depth WCHAN output"
@@ -446,7 +448,6 @@ config PARAVIRT_DEBUG
 
 config MEMTEST
 	bool "Memtest"
-	depends on X86_64
 	help
 	  This option adds a kernel parameter 'memtest', which allows memtest
 	  to be set.
@@ -1276,6 +1277,14 @@ config CRASH_DUMP
 	  (CONFIG_RELOCATABLE=y).
 	  For more details see Documentation/kdump/kdump.txt
 
+config KEXEC_JUMP
+	bool "kexec jump (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on KEXEC && HIBERNATION && X86_32
+	help
+	  Jump between original kernel and kexeced kernel and invoke
+	  code in physical address mode via KEXEC
+
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
 	default "0x1000000" if X86_NUMAQ
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index abff1b84ed5b..2c518fbc52ec 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -362,10 +362,6 @@ config X86_ALIGNMENT_16
 	def_bool y
 	depends on MWINCHIP3D || MWINCHIP2 || MWINCHIPC6 || MCYRIXIII || X86_ELAN || MK6 || M586MMX || M586TSC || M586 || M486 || MVIAC3_2 || MGEODEGX1
 
-config X86_GOOD_APIC
-	def_bool y
-	depends on MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || MK8 || MEFFICEON || MCORE2 || MVIAC7 || X86_64
-
 config X86_INTEL_USERCOPY
 	def_bool y
 	depends on MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M586MMX || X86_GENERIC || MK8 || MK7 || MEFFICEON || MCORE2
@@ -418,4 +414,4 @@ config X86_MINIMUM_CPU_FAMILY
 
 config X86_DEBUGCTLMSR
 	def_bool y
-	depends on !(M586MMX || M586TSC || M586 || M486 || M386)
+	depends on !(MK6 || MWINCHIPC6 || MWINCHIP2 || MWINCHIP3D || MCYRIXIII || M586MMX || M586TSC || M586 || M486 || M386)
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index ae36bfa814e5..092f019e033a 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -5,13 +5,15 @@ config TRACE_IRQFLAGS_SUPPORT
 
 source "lib/Kconfig.debug"
 
-config NONPROMISC_DEVMEM
+config STRICT_DEVMEM
 	bool "Filter access to /dev/mem"
 	help
-	  If this option is left off, you allow userspace access to all
+	  If this option is disabled, you allow userspace (root) access to all
 	  of memory, including kernel and userspace memory. Accidental
 	  access to this is obviously disastrous, but specific access can
-	  be used by people debugging the kernel.
+	  be used by people debugging the kernel. Note that with PAT support
+	  enabled, even in this case there are restrictions on /dev/mem
+	  use due to the cache aliasing requirements.
 
 	  If this option is switched on, the /dev/mem file only allows
 	  userspace access to PCI space and the BIOS code and data regions.
@@ -287,7 +289,6 @@ config CPA_DEBUG
 
 config OPTIMIZE_INLINING
 	bool "Allow gcc to uninline functions marked 'inline'"
-	depends on BROKEN
 	help
 	  This option determines if the kernel forces gcc to inline the functions
 	  developers have marked 'inline'. Doing so takes away freedom from gcc to
@@ -298,5 +299,7 @@ config OPTIMIZE_INLINING
 	  become the default in the future, until then this option is there to
 	  test gcc for this.
 
+	  If unsure, say N.
+
 endmenu
 
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 919ce21ea654..f5631da585b6 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -118,11 +118,6 @@ mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic
 fcore-$(CONFIG_X86_GENERICARCH)	+= arch/x86/mach-generic/
 mcore-$(CONFIG_X86_GENERICARCH)	:= arch/x86/mach-default/
 
-# RDC R-321x subarch support
-mflags-$(CONFIG_X86_RDC321X)	:= -Iinclude/asm-x86/mach-rdc321x
-mcore-$(CONFIG_X86_RDC321X)	:= arch/x86/mach-default/
-core-$(CONFIG_X86_RDC321X)	+= arch/x86/mach-rdc321x/
-
 # default subarch .h files
 mflags-y += -Iinclude/asm-x86/mach-default
 
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index bc5553b496f7..9fea73706479 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -182,8 +182,6 @@ static unsigned		outcnt;
 static int  fill_inbuf(void);
 static void flush_window(void);
 static void error(char *m);
-static void gzip_mark(void **);
-static void gzip_release(void **);
 
 /*
  * This is set up by the setup-routine at boot-time
@@ -196,9 +194,6 @@ extern int input_len;
 
 static long bytes_out;
 
-static void *malloc(int size);
-static void free(void *where);
-
 static void *memset(void *s, int c, unsigned n);
 static void *memcpy(void *dest, const void *src, unsigned n);
 
@@ -220,40 +215,6 @@ static int lines, cols;
 
 #include "../../../../lib/inflate.c"
 
-static void *malloc(int size)
-{
-	void *p;
-
-	if (size < 0)
-		error("Malloc error");
-	if (free_mem_ptr <= 0)
-		error("Memory error");
-
-	free_mem_ptr = (free_mem_ptr + 3) & ~3;	/* Align */
-
-	p = (void *)free_mem_ptr;
-	free_mem_ptr += size;
-
-	if (free_mem_ptr >= free_mem_end_ptr)
-		error("Out of memory");
-
-	return p;
-}
-
-static void free(void *where)
-{	/* Don't care */
-}
-
-static void gzip_mark(void **ptr)
-{
-	*ptr = (void *) free_mem_ptr;
-}
-
-static void gzip_release(void **ptr)
-{
-	free_mem_ptr = (memptr) *ptr;
-}
-
 static void scroll(void)
 {
 	int i;
diff --git a/arch/x86/boot/edd.c b/arch/x86/boot/edd.c
index 03399d64013b..d93cbc6464d0 100644
--- a/arch/x86/boot/edd.c
+++ b/arch/x86/boot/edd.c
@@ -167,9 +167,8 @@ void query_edd(void)
 		 * Scan the BIOS-supported hard disks and query EDD
 		 * information...
 		 */
-		get_edd_info(devno, &ei);
-
-		if (boot_params.eddbuf_entries < EDDMAXNR) {
+		if (!get_edd_info(devno, &ei)
+		    && boot_params.eddbuf_entries < EDDMAXNR) {
 			memcpy(edp, &ei, sizeof ei);
 			edp++;
 			boot_params.eddbuf_entries++;
diff --git a/arch/x86/boot/pm.c b/arch/x86/boot/pm.c
index 328956fdb59e..85a1cd8a8ff8 100644
--- a/arch/x86/boot/pm.c
+++ b/arch/x86/boot/pm.c
@@ -98,12 +98,6 @@ static void reset_coprocessor(void)
 /*
  * Set up the GDT
  */
-#define GDT_ENTRY(flags, base, limit)		\
-	(((u64)(base & 0xff000000) << 32) |	\
-	 ((u64)flags << 40) |			\
-	 ((u64)(limit & 0x00ff0000) << 32) |	\
-	 ((u64)(base & 0x00ffffff) << 16) |	\
-	 ((u64)(limit & 0x0000ffff)))
 
 struct gdt_ptr {
 	u16 len;
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 9bc34e2033ec..4d73f53287b6 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -2047,7 +2047,7 @@ CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 # CONFIG_SAMPLES is not set
 # CONFIG_KGDB is not set
 CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_NONPROMISC_DEVMEM is not set
+# CONFIG_STRICT_DEVMEM is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index ae5124e064d4..a40452429625 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -2012,7 +2012,7 @@ CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
 # CONFIG_SAMPLES is not set
 # CONFIG_KGDB is not set
 CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_NONPROMISC_DEVMEM is not set
+# CONFIG_STRICT_DEVMEM is not set
 CONFIG_EARLY_PRINTK=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c
index 58cccb6483b0..a0e1dbe67dc1 100644
--- a/arch/x86/ia32/ia32_aout.c
+++ b/arch/x86/ia32/ia32_aout.c
@@ -441,12 +441,6 @@ beyond_if:
 	regs->r8 = regs->r9 = regs->r10 = regs->r11 =
 	regs->r12 = regs->r13 = regs->r14 = regs->r15 = 0;
 	set_fs(USER_DS);
-	if (unlikely(current->ptrace & PT_PTRACED)) {
-		if (current->ptrace & PT_TRACE_EXEC)
-			ptrace_notify((PTRACE_EVENT_EXEC << 8) | SIGTRAP);
-		else
-			send_sig(SIGTRAP, current, 0);
-	}
 	return 0;
 }
 
diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c
index cb3856a18c85..20af4c79579a 100644
--- a/arch/x86/ia32/ia32_signal.c
+++ b/arch/x86/ia32/ia32_signal.c
@@ -36,6 +36,11 @@
 
 #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
 
+#define FIX_EFLAGS	(X86_EFLAGS_AC | X86_EFLAGS_OF | \
+			 X86_EFLAGS_DF | X86_EFLAGS_TF | X86_EFLAGS_SF | \
+			 X86_EFLAGS_ZF | X86_EFLAGS_AF | X86_EFLAGS_PF | \
+			 X86_EFLAGS_CF)
+
 asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset);
 void signal_fault(struct pt_regs *regs, void __user *frame, char *where);
 
@@ -248,7 +253,7 @@ static int ia32_restore_sigcontext(struct pt_regs *regs,
 	regs->ss |= 3;
 
 	err |= __get_user(tmpflags, &sc->flags);
-	regs->flags = (regs->flags & ~0x40DD5) | (tmpflags & 0x40DD5);
+	regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS);
 	/* disable syscall checks */
 	regs->orig_ax = -1;
 
@@ -515,7 +520,6 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 			compat_sigset_t *set, struct pt_regs *regs)
 {
 	struct rt_sigframe __user *frame;
-	struct exec_domain *ed = current_thread_info()->exec_domain;
 	void __user *restorer;
 	int err = 0;
 
@@ -538,8 +542,7 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 	if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame)))
 		goto give_sigsegv;
 
-	err |= __put_user((ed && ed->signal_invmap && sig < 32
-			   ? ed->signal_invmap[sig] : sig), &frame->sig);
+	err |= __put_user(sig, &frame->sig);
 	err |= __put_user(ptr_to_compat(&frame->info), &frame->pinfo);
 	err |= __put_user(ptr_to_compat(&frame->uc), &frame->puc);
 	err |= copy_siginfo_to_user32(&frame->info, info);
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 20371d0635e4..ffc1bb4fed7d 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -15,6 +15,16 @@
 #include <asm/irqflags.h>
 #include <linux/linkage.h>
 
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_LE	   0x40000000
+
+#ifndef CONFIG_AUDITSYSCALL
+#define sysexit_audit int_ret_from_sys_call
+#define sysretl_audit int_ret_from_sys_call
+#endif
+
 #define IA32_NR_syscalls ((ia32_syscall_end - ia32_sys_call_table)/8)
 
 	.macro IA32_ARG_FIXUP noebp=0
@@ -37,6 +47,11 @@
 	movq	%rax,R8(%rsp)
 	.endm
 
+	/*
+	 * Reload arg registers from stack in case ptrace changed them.
+	 * We don't reload %eax because syscall_trace_enter() returned
+	 * the value it wants us to use in the table lookup.
+	 */
 	.macro LOAD_ARGS32 offset
 	movl \offset(%rsp),%r11d
 	movl \offset+8(%rsp),%r10d
@@ -46,7 +61,6 @@
 	movl \offset+48(%rsp),%edx
 	movl \offset+56(%rsp),%esi
 	movl \offset+64(%rsp),%edi
-	movl \offset+72(%rsp),%eax
 	.endm
 	
 	.macro CFI_STARTPROC32 simple
@@ -137,21 +151,22 @@ ENTRY(ia32_sysenter_target)
  	.previous	
 	GET_THREAD_INFO(%r10)
 	orl    $TS_COMPAT,TI_status(%r10)
-	testl  $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
-		 TI_flags(%r10)
+	testl  $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
 	CFI_REMEMBER_STATE
 	jnz  sysenter_tracesys
-sysenter_do_call:	
 	cmpl	$(IA32_NR_syscalls-1),%eax
 	ja	ia32_badsys
+sysenter_do_call:
 	IA32_ARG_FIXUP 1
+sysenter_dispatch:
 	call	*ia32_sys_call_table(,%rax,8)
 	movq	%rax,RAX-ARGOFFSET(%rsp)
 	GET_THREAD_INFO(%r10)
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	testl	$_TIF_ALLWORK_MASK,TI_flags(%r10)
-	jnz	int_ret_from_sys_call
+	jnz	sysexit_audit
+sysexit_from_sys_call:
 	andl    $~TS_COMPAT,TI_status(%r10)
 	/* clear IF, that popfq doesn't enable interrupts early */
 	andl  $~0x200,EFLAGS-R11(%rsp) 
@@ -167,9 +182,63 @@ sysenter_do_call:
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS_SYSEXIT32
 
-sysenter_tracesys:
+#ifdef CONFIG_AUDITSYSCALL
+	.macro auditsys_entry_common
+	movl %esi,%r9d			/* 6th arg: 4th syscall arg */
+	movl %edx,%r8d			/* 5th arg: 3rd syscall arg */
+	/* (already in %ecx)		   4th arg: 2nd syscall arg */
+	movl %ebx,%edx			/* 3rd arg: 1st syscall arg */
+	movl %eax,%esi			/* 2nd arg: syscall number */
+	movl $AUDIT_ARCH_I386,%edi	/* 1st arg: audit arch */
+	call audit_syscall_entry
+	movl RAX-ARGOFFSET(%rsp),%eax	/* reload syscall number */
+	cmpl $(IA32_NR_syscalls-1),%eax
+	ja ia32_badsys
+	movl %ebx,%edi			/* reload 1st syscall arg */
+	movl RCX-ARGOFFSET(%rsp),%esi	/* reload 2nd syscall arg */
+	movl RDX-ARGOFFSET(%rsp),%edx	/* reload 3rd syscall arg */
+	movl RSI-ARGOFFSET(%rsp),%ecx	/* reload 4th syscall arg */
+	movl RDI-ARGOFFSET(%rsp),%r8d	/* reload 5th syscall arg */
+	.endm
+
+	.macro auditsys_exit exit,ebpsave=RBP
+	testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+	jnz int_ret_from_sys_call
+	TRACE_IRQS_ON
+	sti
+	movl %eax,%esi		/* second arg, syscall return value */
+	cmpl $0,%eax		/* is it < 0? */
+	setl %al		/* 1 if so, 0 if not */
+	movzbl %al,%edi		/* zero-extend that into %edi */
+	inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
+	call audit_syscall_exit
+	GET_THREAD_INFO(%r10)
+	movl RAX-ARGOFFSET(%rsp),%eax	/* reload syscall return value */
+	movl \ebpsave-ARGOFFSET(%rsp),%ebp /* reload user register value */
+	movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
+	cli
+	TRACE_IRQS_OFF
+	testl %edi,TI_flags(%r10)
+	jnz int_with_check
+	jmp \exit
+	.endm
+
+sysenter_auditsys:
 	CFI_RESTORE_STATE
+	auditsys_entry_common
+	movl %ebp,%r9d			/* reload 6th syscall arg */
+	jmp sysenter_dispatch
+
+sysexit_audit:
+	auditsys_exit sysexit_from_sys_call
+#endif
+
+sysenter_tracesys:
 	xchgl	%r9d,%ebp
+#ifdef CONFIG_AUDITSYSCALL
+	testl	$(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+	jz	sysenter_auditsys
+#endif
 	SAVE_REST
 	CLEAR_RREGS
 	movq	%r9,R9(%rsp)
@@ -242,21 +311,22 @@ ENTRY(ia32_cstar_target)
 	.previous	
 	GET_THREAD_INFO(%r10)
 	orl   $TS_COMPAT,TI_status(%r10)
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
-		TI_flags(%r10)
+	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
 	CFI_REMEMBER_STATE
 	jnz   cstar_tracesys
 cstar_do_call:	
 	cmpl $IA32_NR_syscalls-1,%eax
 	ja  ia32_badsys
 	IA32_ARG_FIXUP 1
+cstar_dispatch:
 	call *ia32_sys_call_table(,%rax,8)
 	movq %rax,RAX-ARGOFFSET(%rsp)
 	GET_THREAD_INFO(%r10)
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	testl $_TIF_ALLWORK_MASK,TI_flags(%r10)
-	jnz  int_ret_from_sys_call
+	jnz sysretl_audit
+sysretl_from_sys_call:
 	andl $~TS_COMPAT,TI_status(%r10)
 	RESTORE_ARGS 1,-ARG_SKIP,1,1,1
 	movl RIP-ARGOFFSET(%rsp),%ecx
@@ -268,8 +338,23 @@ cstar_do_call:
 	CFI_RESTORE rsp
 	USERGS_SYSRET32
 	
-cstar_tracesys:	
+#ifdef CONFIG_AUDITSYSCALL
+cstar_auditsys:
 	CFI_RESTORE_STATE
+	movl %r9d,R9-ARGOFFSET(%rsp)	/* register to be clobbered by call */
+	auditsys_entry_common
+	movl R9-ARGOFFSET(%rsp),%r9d	/* reload 6th syscall arg */
+	jmp cstar_dispatch
+
+sysretl_audit:
+	auditsys_exit sysretl_from_sys_call, RCX /* user %ebp in RCX slot */
+#endif
+
+cstar_tracesys:
+#ifdef CONFIG_AUDITSYSCALL
+	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
+	jz cstar_auditsys
+#endif
 	xchgl %r9d,%ebp
 	SAVE_REST
 	CLEAR_RREGS
@@ -321,6 +406,7 @@ ENTRY(ia32_syscall)
 	/*CFI_REL_OFFSET	rflags,EFLAGS-RIP*/
 	/*CFI_REL_OFFSET	cs,CS-RIP*/
 	CFI_REL_OFFSET	rip,RIP-RIP
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	SWAPGS
 	/*
 	 * No need to follow this irqs on/off section: the syscall
@@ -336,8 +422,7 @@ ENTRY(ia32_syscall)
 	SAVE_ARGS 0,0,1
 	GET_THREAD_INFO(%r10)
 	orl   $TS_COMPAT,TI_status(%r10)
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
-		TI_flags(%r10)
+	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
 	jnz ia32_tracesys
 ia32_do_syscall:	
 	cmpl $(IA32_NR_syscalls-1),%eax
@@ -741,4 +826,10 @@ ia32_sys_call_table:
 	.quad sys32_fallocate
 	.quad compat_sys_timerfd_settime	/* 325 */
 	.quad compat_sys_timerfd_gettime
+	.quad compat_sys_signalfd4
+	.quad sys_eventfd2
+	.quad sys_epoll_create1
+	.quad sys_dup3			/* 330 */
+	.quad sys_pipe2
+	.quad sys_inotify_init1
 ia32_syscall_end:
diff --git a/arch/x86/ia32/sys_ia32.c b/arch/x86/ia32/sys_ia32.c
index f00afdf61e67..d3c64088b981 100644
--- a/arch/x86/ia32/sys_ia32.c
+++ b/arch/x86/ia32/sys_ia32.c
@@ -238,7 +238,7 @@ asmlinkage long sys32_pipe(int __user *fd)
 	int retval;
 	int fds[2];
 
-	retval = do_pipe(fds);
+	retval = do_pipe_flags(fds, 0);
 	if (retval)
 		goto out;
 	if (copy_to_user(fd, fds, sizeof(fds)))
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 5112c84f5421..3db651fc8ec5 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -7,10 +7,10 @@ extra-y                := head_$(BITS).o head$(BITS).o head.o init_task.o vmlinu
 CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE)
 
 ifdef CONFIG_FTRACE
-# Do not profile debug utilities
-CFLAGS_REMOVE_tsc_64.o = -pg
-CFLAGS_REMOVE_tsc_32.o = -pg
+# Do not profile debug and lowlevel utilities
+CFLAGS_REMOVE_tsc.o = -pg
 CFLAGS_REMOVE_rtc.o = -pg
+CFLAGS_REMOVE_paravirt.o = -pg
 endif
 
 #
@@ -103,6 +103,7 @@ obj-$(CONFIG_OLPC)		+= olpc.o
 # 64 bit specific files
 ifeq ($(CONFIG_X86_64),y)
         obj-y				+= genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o
+	obj-y				+= bios_uv.o
         obj-$(CONFIG_X86_PM_TIMER)	+= pmtimer_64.o
         obj-$(CONFIG_AUDIT)		+= audit_64.o
 
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index f489d7a9be92..fa88a1d71290 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -1021,7 +1021,7 @@ void __init mp_config_acpi_legacy_irqs(void)
 	mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
 #endif
 	set_bit(MP_ISA_BUS, mp_bus_not_pci);
-	Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
+	pr_debug("Bus #%d is ISA\n", MP_ISA_BUS);
 
 #ifdef CONFIG_X86_ES7000
 	/*
@@ -1127,8 +1127,8 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity)
 		return gsi;
 	}
 	if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
-		Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
-			mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
+		pr_debug(KERN_DEBUG "Pin %d-%d already programmed\n",
+			 mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
 #ifdef CONFIG_X86_32
 		return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
 #else
diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c
index de2d2e4ebad9..7c074eec39fb 100644
--- a/arch/x86/kernel/acpi/processor.c
+++ b/arch/x86/kernel/acpi/processor.c
@@ -56,6 +56,12 @@ static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c)
 	if (cpu_has(c, X86_FEATURE_ACPI))
 		buf[2] |= ACPI_PDC_T_FFH;
 
+	/*
+	 * If mwait/monitor is unsupported, C2/C3_FFH will be disabled
+	 */
+	if (!cpu_has(c, X86_FEATURE_MWAIT))
+		buf[2] &= ~(ACPI_PDC_C_C2C3_FFH);
+
 	obj->type = ACPI_TYPE_BUFFER;
 	obj->buffer.length = 12;
 	obj->buffer.pointer = (u8 *) buf;
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index 793ad2045f58..fa2161d5003b 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -9,6 +9,7 @@
 #include <linux/bootmem.h>
 #include <linux/dmi.h>
 #include <linux/cpumask.h>
+#include <asm/segment.h>
 
 #include "realmode/wakeup.h"
 #include "sleep.h"
@@ -23,15 +24,6 @@ static unsigned long acpi_realmode;
 static char temp_stack[10240];
 #endif
 
-/* XXX: this macro should move to asm-x86/segment.h and be shared with the
-   boot code... */
-#define GDT_ENTRY(flags, base, limit)		\
-	(((u64)(base & 0xff000000) << 32) |	\
-	 ((u64)flags << 40) |			\
-	 ((u64)(limit & 0x00ff0000) << 32) |	\
-	 ((u64)(base & 0x00ffffff) << 16) |	\
-	 ((u64)(limit & 0x0000ffff)))
-
 /**
  * acpi_save_state_mem - save kernel state
  *
@@ -158,6 +150,12 @@ static int __init acpi_sleep_setup(char *str)
 			acpi_realmode_flags |= 2;
 		if (strncmp(str, "s3_beep", 7) == 0)
 			acpi_realmode_flags |= 4;
+#ifdef CONFIG_HIBERNATION
+		if (strncmp(str, "s4_nohwsig", 10) == 0)
+			acpi_no_s4_hw_signature();
+#endif
+		if (strncmp(str, "old_ordering", 12) == 0)
+			acpi_old_suspend_ordering();
 		str = strchr(str, ',');
 		if (str != NULL)
 			str += strspn(str, ", \t");
diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c
index f2766d84c7a0..22d7d050905d 100644
--- a/arch/x86/kernel/amd_iommu.c
+++ b/arch/x86/kernel/amd_iommu.c
@@ -23,30 +23,43 @@
 #include <linux/scatterlist.h>
 #include <linux/iommu-helper.h>
 #include <asm/proto.h>
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/amd_iommu_types.h>
 #include <asm/amd_iommu.h>
 
 #define CMD_SET_TYPE(cmd, t) ((cmd)->data[1] |= ((t) << 28))
 
-#define to_pages(addr, size) \
-	 (round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT)
+#define EXIT_LOOP_COUNT 10000000
 
 static DEFINE_RWLOCK(amd_iommu_devtable_lock);
 
-struct command {
+/*
+ * general struct to manage commands send to an IOMMU
+ */
+struct iommu_cmd {
 	u32 data[4];
 };
 
 static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
 			     struct unity_map_entry *e);
 
+/* returns !0 if the IOMMU is caching non-present entries in its TLB */
 static int iommu_has_npcache(struct amd_iommu *iommu)
 {
 	return iommu->cap & IOMMU_CAP_NPCACHE;
 }
 
-static int __iommu_queue_command(struct amd_iommu *iommu, struct command *cmd)
+/****************************************************************************
+ *
+ * IOMMU command queuing functions
+ *
+ ****************************************************************************/
+
+/*
+ * Writes the command to the IOMMUs command buffer and informs the
+ * hardware about the new command. Must be called with iommu->lock held.
+ */
+static int __iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
 {
 	u32 tail, head;
 	u8 *target;
@@ -63,7 +76,11 @@ static int __iommu_queue_command(struct amd_iommu *iommu, struct command *cmd)
 	return 0;
 }
 
-static int iommu_queue_command(struct amd_iommu *iommu, struct command *cmd)
+/*
+ * General queuing function for commands. Takes iommu->lock and calls
+ * __iommu_queue_command().
+ */
+static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd)
 {
 	unsigned long flags;
 	int ret;
@@ -75,16 +92,24 @@ static int iommu_queue_command(struct amd_iommu *iommu, struct command *cmd)
 	return ret;
 }
 
+/*
+ * This function is called whenever we need to ensure that the IOMMU has
+ * completed execution of all commands we sent. It sends a
+ * COMPLETION_WAIT command and waits for it to finish. The IOMMU informs
+ * us about that by writing a value to a physical address we pass with
+ * the command.
+ */
 static int iommu_completion_wait(struct amd_iommu *iommu)
 {
 	int ret;
-	struct command cmd;
+	struct iommu_cmd cmd;
 	volatile u64 ready = 0;
 	unsigned long ready_phys = virt_to_phys(&ready);
+	unsigned long i = 0;
 
 	memset(&cmd, 0, sizeof(cmd));
 	cmd.data[0] = LOW_U32(ready_phys) | CMD_COMPL_WAIT_STORE_MASK;
-	cmd.data[1] = HIGH_U32(ready_phys);
+	cmd.data[1] = upper_32_bits(ready_phys);
 	cmd.data[2] = 1; /* value written to 'ready' */
 	CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT);
 
@@ -95,15 +120,23 @@ static int iommu_completion_wait(struct amd_iommu *iommu)
 	if (ret)
 		return ret;
 
-	while (!ready)
+	while (!ready && (i < EXIT_LOOP_COUNT)) {
+		++i;
 		cpu_relax();
+	}
+
+	if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit()))
+		printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n");
 
 	return 0;
 }
 
+/*
+ * Command send function for invalidating a device table entry
+ */
 static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
 {
-	struct command cmd;
+	struct iommu_cmd cmd;
 
 	BUG_ON(iommu == NULL);
 
@@ -116,20 +149,23 @@ static int iommu_queue_inv_dev_entry(struct amd_iommu *iommu, u16 devid)
 	return iommu_queue_command(iommu, &cmd);
 }
 
+/*
+ * Generic command send function for invalidaing TLB entries
+ */
 static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
 		u64 address, u16 domid, int pde, int s)
 {
-	struct command cmd;
+	struct iommu_cmd cmd;
 
 	memset(&cmd, 0, sizeof(cmd));
 	address &= PAGE_MASK;
 	CMD_SET_TYPE(&cmd, CMD_INV_IOMMU_PAGES);
 	cmd.data[1] |= domid;
 	cmd.data[2] = LOW_U32(address);
-	cmd.data[3] = HIGH_U32(address);
-	if (s)
+	cmd.data[3] = upper_32_bits(address);
+	if (s) /* size bit - we flush more than one 4kb page */
 		cmd.data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK;
-	if (pde)
+	if (pde) /* PDE bit - we wan't flush everything not only the PTEs */
 		cmd.data[2] |= CMD_INV_IOMMU_PAGES_PDE_MASK;
 
 	iommu->need_sync = 1;
@@ -137,11 +173,16 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu,
 	return iommu_queue_command(iommu, &cmd);
 }
 
+/*
+ * TLB invalidation function which is called from the mapping functions.
+ * It invalidates a single PTE if the range to flush is within a single
+ * page. Otherwise it flushes the whole TLB of the IOMMU.
+ */
 static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid,
 		u64 address, size_t size)
 {
 	int s = 0;
-	unsigned pages = to_pages(address, size);
+	unsigned pages = iommu_num_pages(address, size);
 
 	address &= PAGE_MASK;
 
@@ -159,6 +200,20 @@ static int iommu_flush_pages(struct amd_iommu *iommu, u16 domid,
 	return 0;
 }
 
+/****************************************************************************
+ *
+ * The functions below are used the create the page table mappings for
+ * unity mapped regions.
+ *
+ ****************************************************************************/
+
+/*
+ * Generic mapping functions. It maps a physical address into a DMA
+ * address space. It allocates the page table pages if necessary.
+ * In the future it can be extended to a generic mapping function
+ * supporting all features of AMD IOMMU page tables like level skipping
+ * and full 64 bit address spaces.
+ */
 static int iommu_map(struct protection_domain *dom,
 		     unsigned long bus_addr,
 		     unsigned long phys_addr,
@@ -209,6 +264,10 @@ static int iommu_map(struct protection_domain *dom,
 	return 0;
 }
 
+/*
+ * This function checks if a specific unity mapping entry is needed for
+ * this specific IOMMU.
+ */
 static int iommu_for_unity_map(struct amd_iommu *iommu,
 			       struct unity_map_entry *entry)
 {
@@ -223,6 +282,12 @@ static int iommu_for_unity_map(struct amd_iommu *iommu,
 	return 0;
 }
 
+/*
+ * Init the unity mappings for a specific IOMMU in the system
+ *
+ * Basically iterates over all unity mapping entries and applies them to
+ * the default domain DMA of that IOMMU if necessary.
+ */
 static int iommu_init_unity_mappings(struct amd_iommu *iommu)
 {
 	struct unity_map_entry *entry;
@@ -239,6 +304,10 @@ static int iommu_init_unity_mappings(struct amd_iommu *iommu)
 	return 0;
 }
 
+/*
+ * This function actually applies the mapping to the page table of the
+ * dma_ops domain.
+ */
 static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
 			     struct unity_map_entry *e)
 {
@@ -261,6 +330,9 @@ static int dma_ops_unity_map(struct dma_ops_domain *dma_dom,
 	return 0;
 }
 
+/*
+ * Inits the unity mappings required for a specific device
+ */
 static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom,
 					  u16 devid)
 {
@@ -278,12 +350,26 @@ static int init_unity_mappings_for_device(struct dma_ops_domain *dma_dom,
 	return 0;
 }
 
+/****************************************************************************
+ *
+ * The next functions belong to the address allocator for the dma_ops
+ * interface functions. They work like the allocators in the other IOMMU
+ * drivers. Its basically a bitmap which marks the allocated pages in
+ * the aperture. Maybe it could be enhanced in the future to a more
+ * efficient allocator.
+ *
+ ****************************************************************************/
 static unsigned long dma_mask_to_pages(unsigned long mask)
 {
 	return (mask >> PAGE_SHIFT) +
 		(PAGE_ALIGN(mask & ~PAGE_MASK) >> PAGE_SHIFT);
 }
 
+/*
+ * The address allocator core function.
+ *
+ * called with domain->lock held
+ */
 static unsigned long dma_ops_alloc_addresses(struct device *dev,
 					     struct dma_ops_domain *dom,
 					     unsigned int pages)
@@ -317,6 +403,11 @@ static unsigned long dma_ops_alloc_addresses(struct device *dev,
 	return address;
 }
 
+/*
+ * The address free function.
+ *
+ * called with domain->lock held
+ */
 static void dma_ops_free_addresses(struct dma_ops_domain *dom,
 				   unsigned long address,
 				   unsigned int pages)
@@ -325,6 +416,16 @@ static void dma_ops_free_addresses(struct dma_ops_domain *dom,
 	iommu_area_free(dom->bitmap, address, pages);
 }
 
+/****************************************************************************
+ *
+ * The next functions belong to the domain allocation. A domain is
+ * allocated for every IOMMU as the default domain. If device isolation
+ * is enabled, every device get its own domain. The most important thing
+ * about domains is the page table mapping the DMA address space they
+ * contain.
+ *
+ ****************************************************************************/
+
 static u16 domain_id_alloc(void)
 {
 	unsigned long flags;
@@ -342,6 +443,10 @@ static u16 domain_id_alloc(void)
 	return id;
 }
 
+/*
+ * Used to reserve address ranges in the aperture (e.g. for exclusion
+ * ranges.
+ */
 static void dma_ops_reserve_addresses(struct dma_ops_domain *dom,
 				      unsigned long start_page,
 				      unsigned int pages)
@@ -382,6 +487,10 @@ static void dma_ops_free_pagetable(struct dma_ops_domain *dma_dom)
 	free_page((unsigned long)p1);
 }
 
+/*
+ * Free a domain, only used if something went wrong in the
+ * allocation path and we need to free an already allocated page table
+ */
 static void dma_ops_domain_free(struct dma_ops_domain *dom)
 {
 	if (!dom)
@@ -396,6 +505,11 @@ static void dma_ops_domain_free(struct dma_ops_domain *dom)
 	kfree(dom);
 }
 
+/*
+ * Allocates a new protection domain usable for the dma_ops functions.
+ * It also intializes the page table and the address allocator data
+ * structures required for the dma_ops interface
+ */
 static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu,
 						   unsigned order)
 {
@@ -436,14 +550,20 @@ static struct dma_ops_domain *dma_ops_domain_alloc(struct amd_iommu *iommu,
 	dma_dom->bitmap[0] = 1;
 	dma_dom->next_bit = 0;
 
+	/* Intialize the exclusion range if necessary */
 	if (iommu->exclusion_start &&
 	    iommu->exclusion_start < dma_dom->aperture_size) {
 		unsigned long startpage = iommu->exclusion_start >> PAGE_SHIFT;
-		int pages = to_pages(iommu->exclusion_start,
-				iommu->exclusion_length);
+		int pages = iommu_num_pages(iommu->exclusion_start,
+					    iommu->exclusion_length);
 		dma_ops_reserve_addresses(dma_dom, startpage, pages);
 	}
 
+	/*
+	 * At the last step, build the page tables so we don't need to
+	 * allocate page table pages in the dma_ops mapping/unmapping
+	 * path.
+	 */
 	num_pte_pages = dma_dom->aperture_size / (PAGE_SIZE * 512);
 	dma_dom->pte_pages = kzalloc(num_pte_pages * sizeof(void *),
 			GFP_KERNEL);
@@ -472,6 +592,10 @@ free_dma_dom:
 	return NULL;
 }
 
+/*
+ * Find out the protection domain structure for a given PCI device. This
+ * will give us the pointer to the page table root for example.
+ */
 static struct protection_domain *domain_for_device(u16 devid)
 {
 	struct protection_domain *dom;
@@ -484,6 +608,10 @@ static struct protection_domain *domain_for_device(u16 devid)
 	return dom;
 }
 
+/*
+ * If a device is not yet associated with a domain, this function does
+ * assigns it visible for the hardware
+ */
 static void set_device_domain(struct amd_iommu *iommu,
 			      struct protection_domain *domain,
 			      u16 devid)
@@ -508,6 +636,19 @@ static void set_device_domain(struct amd_iommu *iommu,
 	iommu->need_sync = 1;
 }
 
+/*****************************************************************************
+ *
+ * The next functions belong to the dma_ops mapping/unmapping code.
+ *
+ *****************************************************************************/
+
+/*
+ * In the dma_ops path we only have the struct device. This function
+ * finds the corresponding IOMMU, the protection domain and the
+ * requestor id for a given device.
+ * If the device is not yet associated with a domain this is also done
+ * in this function.
+ */
 static int get_device_resources(struct device *dev,
 				struct amd_iommu **iommu,
 				struct protection_domain **domain,
@@ -520,9 +661,10 @@ static int get_device_resources(struct device *dev,
 	BUG_ON(!dev || dev->bus != &pci_bus_type || !dev->dma_mask);
 
 	pcidev = to_pci_dev(dev);
-	_bdf = (pcidev->bus->number << 8) | pcidev->devfn;
+	_bdf = calc_devid(pcidev->bus->number, pcidev->devfn);
 
-	if (_bdf >= amd_iommu_last_bdf) {
+	/* device not translated by any IOMMU in the system? */
+	if (_bdf > amd_iommu_last_bdf) {
 		*iommu = NULL;
 		*domain = NULL;
 		*bdf = 0xffff;
@@ -547,6 +689,10 @@ static int get_device_resources(struct device *dev,
 	return 1;
 }
 
+/*
+ * This is the generic map function. It maps one 4kb page at paddr to
+ * the given address in the DMA address space for the domain.
+ */
 static dma_addr_t dma_ops_domain_map(struct amd_iommu *iommu,
 				     struct dma_ops_domain *dom,
 				     unsigned long address,
@@ -578,6 +724,9 @@ static dma_addr_t dma_ops_domain_map(struct amd_iommu *iommu,
 	return (dma_addr_t)address;
 }
 
+/*
+ * The generic unmapping function for on page in the DMA address space.
+ */
 static void dma_ops_domain_unmap(struct amd_iommu *iommu,
 				 struct dma_ops_domain *dom,
 				 unsigned long address)
@@ -597,6 +746,12 @@ static void dma_ops_domain_unmap(struct amd_iommu *iommu,
 	*pte = 0ULL;
 }
 
+/*
+ * This function contains common code for mapping of a physically
+ * contiguous memory region into DMA address space. It is uses by all
+ * mapping functions provided by this IOMMU driver.
+ * Must be called with the domain lock held.
+ */
 static dma_addr_t __map_single(struct device *dev,
 			       struct amd_iommu *iommu,
 			       struct dma_ops_domain *dma_dom,
@@ -609,7 +764,7 @@ static dma_addr_t __map_single(struct device *dev,
 	unsigned int pages;
 	int i;
 
-	pages = to_pages(paddr, size);
+	pages = iommu_num_pages(paddr, size);
 	paddr &= PAGE_MASK;
 
 	address = dma_ops_alloc_addresses(dev, dma_dom, pages);
@@ -628,6 +783,10 @@ out:
 	return address;
 }
 
+/*
+ * Does the reverse of the __map_single function. Must be called with
+ * the domain lock held too
+ */
 static void __unmap_single(struct amd_iommu *iommu,
 			   struct dma_ops_domain *dma_dom,
 			   dma_addr_t dma_addr,
@@ -640,7 +799,7 @@ static void __unmap_single(struct amd_iommu *iommu,
 	if ((dma_addr == 0) || (dma_addr + size > dma_dom->aperture_size))
 		return;
 
-	pages = to_pages(dma_addr, size);
+	pages = iommu_num_pages(dma_addr, size);
 	dma_addr &= PAGE_MASK;
 	start = dma_addr;
 
@@ -652,6 +811,9 @@ static void __unmap_single(struct amd_iommu *iommu,
 	dma_ops_free_addresses(dma_dom, dma_addr, pages);
 }
 
+/*
+ * The exported map_single function for dma_ops.
+ */
 static dma_addr_t map_single(struct device *dev, phys_addr_t paddr,
 			     size_t size, int dir)
 {
@@ -664,6 +826,7 @@ static dma_addr_t map_single(struct device *dev, phys_addr_t paddr,
 	get_device_resources(dev, &iommu, &domain, &devid);
 
 	if (iommu == NULL || domain == NULL)
+		/* device not handled by any AMD IOMMU */
 		return (dma_addr_t)paddr;
 
 	spin_lock_irqsave(&domain->lock, flags);
@@ -683,6 +846,9 @@ out:
 	return addr;
 }
 
+/*
+ * The exported unmap_single function for dma_ops.
+ */
 static void unmap_single(struct device *dev, dma_addr_t dma_addr,
 			 size_t size, int dir)
 {
@@ -692,6 +858,7 @@ static void unmap_single(struct device *dev, dma_addr_t dma_addr,
 	u16 devid;
 
 	if (!get_device_resources(dev, &iommu, &domain, &devid))
+		/* device not handled by any AMD IOMMU */
 		return;
 
 	spin_lock_irqsave(&domain->lock, flags);
@@ -706,6 +873,10 @@ static void unmap_single(struct device *dev, dma_addr_t dma_addr,
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
 
+/*
+ * This is a special map_sg function which is used if we should map a
+ * device which is not handled by an AMD IOMMU in the system.
+ */
 static int map_sg_no_iommu(struct device *dev, struct scatterlist *sglist,
 			   int nelems, int dir)
 {
@@ -720,6 +891,10 @@ static int map_sg_no_iommu(struct device *dev, struct scatterlist *sglist,
 	return nelems;
 }
 
+/*
+ * The exported map_sg function for dma_ops (handles scatter-gather
+ * lists).
+ */
 static int map_sg(struct device *dev, struct scatterlist *sglist,
 		  int nelems, int dir)
 {
@@ -775,6 +950,10 @@ unmap:
 	goto out;
 }
 
+/*
+ * The exported map_sg function for dma_ops (handles scatter-gather
+ * lists).
+ */
 static void unmap_sg(struct device *dev, struct scatterlist *sglist,
 		     int nelems, int dir)
 {
@@ -804,6 +983,9 @@ static void unmap_sg(struct device *dev, struct scatterlist *sglist,
 	spin_unlock_irqrestore(&domain->lock, flags);
 }
 
+/*
+ * The exported alloc_coherent function for dma_ops.
+ */
 static void *alloc_coherent(struct device *dev, size_t size,
 			    dma_addr_t *dma_addr, gfp_t flag)
 {
@@ -851,6 +1033,11 @@ out:
 	return virt_addr;
 }
 
+/*
+ * The exported free_coherent function for dma_ops.
+ * FIXME: fix the generic x86 DMA layer so that it actually calls that
+ *        function.
+ */
 static void free_coherent(struct device *dev, size_t size,
 			  void *virt_addr, dma_addr_t dma_addr)
 {
@@ -879,6 +1066,8 @@ free_mem:
 }
 
 /*
+ * The function for pre-allocating protection domains.
+ *
  * If the driver core informs the DMA layer if a driver grabs a device
  * we don't need to preallocate the protection domains anymore.
  * For now we have to.
@@ -893,7 +1082,7 @@ void prealloc_protection_domains(void)
 
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
 		devid = (dev->bus->number << 8) | dev->devfn;
-		if (devid >= amd_iommu_last_bdf)
+		if (devid > amd_iommu_last_bdf)
 			continue;
 		devid = amd_iommu_alias_table[devid];
 		if (domain_for_device(devid))
@@ -921,12 +1110,20 @@ static struct dma_mapping_ops amd_iommu_dma_ops = {
 	.unmap_sg = unmap_sg,
 };
 
+/*
+ * The function which clues the AMD IOMMU driver into dma_ops.
+ */
 int __init amd_iommu_init_dma_ops(void)
 {
 	struct amd_iommu *iommu;
 	int order = amd_iommu_aperture_order;
 	int ret;
 
+	/*
+	 * first allocate a default protection domain for every IOMMU we
+	 * found in the system. Devices not assigned to any other
+	 * protection domain will be assigned to the default one.
+	 */
 	list_for_each_entry(iommu, &amd_iommu_list, list) {
 		iommu->default_dom = dma_ops_domain_alloc(iommu, order);
 		if (iommu->default_dom == NULL)
@@ -936,6 +1133,10 @@ int __init amd_iommu_init_dma_ops(void)
 			goto free_domains;
 	}
 
+	/*
+	 * If device isolation is enabled, pre-allocate the protection
+	 * domains for each device.
+	 */
 	if (amd_iommu_isolate)
 		prealloc_protection_domains();
 
@@ -947,6 +1148,7 @@ int __init amd_iommu_init_dma_ops(void)
 	gart_iommu_aperture = 0;
 #endif
 
+	/* Make the driver finally visible to the drivers */
 	dma_ops = &amd_iommu_dma_ops;
 
 	return 0;
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 2a13e430437d..d9a9da597e79 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -25,20 +25,13 @@
 #include <asm/pci-direct.h>
 #include <asm/amd_iommu_types.h>
 #include <asm/amd_iommu.h>
-#include <asm/gart.h>
+#include <asm/iommu.h>
 
 /*
  * definitions for the ACPI scanning code
  */
-#define UPDATE_LAST_BDF(x) do {\
-	if ((x) > amd_iommu_last_bdf) \
-		amd_iommu_last_bdf = (x); \
-	} while (0);
-
-#define DEVID(bus, devfn) (((bus) << 8) | (devfn))
 #define PCI_BUS(x) (((x) >> 8) & 0xff)
 #define IVRS_HEADER_LENGTH 48
-#define TBL_SIZE(x) (1 << (PAGE_SHIFT + get_order(amd_iommu_last_bdf * (x))))
 
 #define ACPI_IVHD_TYPE                  0x10
 #define ACPI_IVMD_TYPE_ALL              0x20
@@ -71,6 +64,17 @@
 #define ACPI_DEVFLAG_LINT1              0x80
 #define ACPI_DEVFLAG_ATSDIS             0x10000000
 
+/*
+ * ACPI table definitions
+ *
+ * These data structures are laid over the table to parse the important values
+ * out of it.
+ */
+
+/*
+ * structure describing one IOMMU in the ACPI table. Typically followed by one
+ * or more ivhd_entrys.
+ */
 struct ivhd_header {
 	u8 type;
 	u8 flags;
@@ -83,6 +87,10 @@ struct ivhd_header {
 	u32 reserved;
 } __attribute__((packed));
 
+/*
+ * A device entry describing which devices a specific IOMMU translates and
+ * which requestor ids they use.
+ */
 struct ivhd_entry {
 	u8 type;
 	u16 devid;
@@ -90,6 +98,10 @@ struct ivhd_entry {
 	u32 ext;
 } __attribute__((packed));
 
+/*
+ * An AMD IOMMU memory definition structure. It defines things like exclusion
+ * ranges for devices and regions that should be unity mapped.
+ */
 struct ivmd_header {
 	u8 type;
 	u8 flags;
@@ -103,22 +115,80 @@ struct ivmd_header {
 
 static int __initdata amd_iommu_detected;
 
-u16 amd_iommu_last_bdf;
-struct list_head amd_iommu_unity_map;
-unsigned amd_iommu_aperture_order = 26;
-int amd_iommu_isolate;
+u16 amd_iommu_last_bdf;			/* largest PCI device id we have
+					   to handle */
+LIST_HEAD(amd_iommu_unity_map);		/* a list of required unity mappings
+					   we find in ACPI */
+unsigned amd_iommu_aperture_order = 26; /* size of aperture in power of 2 */
+int amd_iommu_isolate;			/* if 1, device isolation is enabled */
+
+LIST_HEAD(amd_iommu_list);		/* list of all AMD IOMMUs in the
+					   system */
 
-struct list_head amd_iommu_list;
+/*
+ * Pointer to the device table which is shared by all AMD IOMMUs
+ * it is indexed by the PCI device id or the HT unit id and contains
+ * information about the domain the device belongs to as well as the
+ * page table root pointer.
+ */
 struct dev_table_entry *amd_iommu_dev_table;
+
+/*
+ * The alias table is a driver specific data structure which contains the
+ * mappings of the PCI device ids to the actual requestor ids on the IOMMU.
+ * More than one device can share the same requestor id.
+ */
 u16 *amd_iommu_alias_table;
+
+/*
+ * The rlookup table is used to find the IOMMU which is responsible
+ * for a specific device. It is also indexed by the PCI device id.
+ */
 struct amd_iommu **amd_iommu_rlookup_table;
+
+/*
+ * The pd table (protection domain table) is used to find the protection domain
+ * data structure a device belongs to. Indexed with the PCI device id too.
+ */
 struct protection_domain **amd_iommu_pd_table;
+
+/*
+ * AMD IOMMU allows up to 2^16 differend protection domains. This is a bitmap
+ * to know which ones are already in use.
+ */
 unsigned long *amd_iommu_pd_alloc_bitmap;
 
-static u32 dev_table_size;
-static u32 alias_table_size;
-static u32 rlookup_table_size;
+static u32 dev_table_size;	/* size of the device table */
+static u32 alias_table_size;	/* size of the alias table */
+static u32 rlookup_table_size;	/* size if the rlookup table */
 
+static inline void update_last_devid(u16 devid)
+{
+	if (devid > amd_iommu_last_bdf)
+		amd_iommu_last_bdf = devid;
+}
+
+static inline unsigned long tbl_size(int entry_size)
+{
+	unsigned shift = PAGE_SHIFT +
+			 get_order(amd_iommu_last_bdf * entry_size);
+
+	return 1UL << shift;
+}
+
+/****************************************************************************
+ *
+ * AMD IOMMU MMIO register space handling functions
+ *
+ * These functions are used to program the IOMMU device registers in
+ * MMIO space required for that driver.
+ *
+ ****************************************************************************/
+
+/*
+ * This function set the exclusion range in the IOMMU. DMA accesses to the
+ * exclusion range are passed through untranslated
+ */
 static void __init iommu_set_exclusion_range(struct amd_iommu *iommu)
 {
 	u64 start = iommu->exclusion_start & PAGE_MASK;
@@ -137,6 +207,7 @@ static void __init iommu_set_exclusion_range(struct amd_iommu *iommu)
 			&entry, sizeof(entry));
 }
 
+/* Programs the physical address of the device table into the IOMMU hardware */
 static void __init iommu_set_device_table(struct amd_iommu *iommu)
 {
 	u32 entry;
@@ -149,6 +220,7 @@ static void __init iommu_set_device_table(struct amd_iommu *iommu)
 			&entry, sizeof(entry));
 }
 
+/* Generic functions to enable/disable certain features of the IOMMU. */
 static void __init iommu_feature_enable(struct amd_iommu *iommu, u8 bit)
 {
 	u32 ctrl;
@@ -167,6 +239,7 @@ static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
 	writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
 }
 
+/* Function to enable the hardware */
 void __init iommu_enable(struct amd_iommu *iommu)
 {
 	printk(KERN_INFO "AMD IOMMU: Enabling IOMMU at ");
@@ -176,6 +249,10 @@ void __init iommu_enable(struct amd_iommu *iommu)
 	iommu_feature_enable(iommu, CONTROL_IOMMU_EN);
 }
 
+/*
+ * mapping and unmapping functions for the IOMMU MMIO space. Each AMD IOMMU in
+ * the system has one.
+ */
 static u8 * __init iommu_map_mmio_space(u64 address)
 {
 	u8 *ret;
@@ -199,16 +276,33 @@ static void __init iommu_unmap_mmio_space(struct amd_iommu *iommu)
 	release_mem_region(iommu->mmio_phys, MMIO_REGION_LENGTH);
 }
 
+/****************************************************************************
+ *
+ * The functions below belong to the first pass of AMD IOMMU ACPI table
+ * parsing. In this pass we try to find out the highest device id this
+ * code has to handle. Upon this information the size of the shared data
+ * structures is determined later.
+ *
+ ****************************************************************************/
+
+/*
+ * This function reads the last device id the IOMMU has to handle from the PCI
+ * capability header for this IOMMU
+ */
 static int __init find_last_devid_on_pci(int bus, int dev, int fn, int cap_ptr)
 {
 	u32 cap;
 
 	cap = read_pci_config(bus, dev, fn, cap_ptr+MMIO_RANGE_OFFSET);
-	UPDATE_LAST_BDF(DEVID(MMIO_GET_BUS(cap), MMIO_GET_LD(cap)));
+	update_last_devid(calc_devid(MMIO_GET_BUS(cap), MMIO_GET_LD(cap)));
 
 	return 0;
 }
 
+/*
+ * After reading the highest device id from the IOMMU PCI capability header
+ * this function looks if there is a higher device id defined in the ACPI table
+ */
 static int __init find_last_devid_from_ivhd(struct ivhd_header *h)
 {
 	u8 *p = (void *)h, *end = (void *)h;
@@ -229,7 +323,8 @@ static int __init find_last_devid_from_ivhd(struct ivhd_header *h)
 		case IVHD_DEV_RANGE_END:
 		case IVHD_DEV_ALIAS:
 		case IVHD_DEV_EXT_SELECT:
-			UPDATE_LAST_BDF(dev->devid);
+			/* all the above subfield types refer to device ids */
+			update_last_devid(dev->devid);
 			break;
 		default:
 			break;
@@ -242,6 +337,11 @@ static int __init find_last_devid_from_ivhd(struct ivhd_header *h)
 	return 0;
 }
 
+/*
+ * Iterate over all IVHD entries in the ACPI table and find the highest device
+ * id which we need to handle. This is the first of three functions which parse
+ * the ACPI table. So we check the checksum here.
+ */
 static int __init find_last_devid_acpi(struct acpi_table_header *table)
 {
 	int i;
@@ -277,19 +377,31 @@ static int __init find_last_devid_acpi(struct acpi_table_header *table)
 	return 0;
 }
 
+/****************************************************************************
+ *
+ * The following functions belong the the code path which parses the ACPI table
+ * the second time. In this ACPI parsing iteration we allocate IOMMU specific
+ * data structures, initialize the device/alias/rlookup table and also
+ * basically initialize the hardware.
+ *
+ ****************************************************************************/
+
+/*
+ * Allocates the command buffer. This buffer is per AMD IOMMU. We can
+ * write commands to that buffer later and the IOMMU will execute them
+ * asynchronously
+ */
 static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
 {
-	u8 *cmd_buf = (u8 *)__get_free_pages(GFP_KERNEL,
+	u8 *cmd_buf = (u8 *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
 			get_order(CMD_BUFFER_SIZE));
-	u64 entry = 0;
+	u64 entry;
 
 	if (cmd_buf == NULL)
 		return NULL;
 
 	iommu->cmd_buf_size = CMD_BUFFER_SIZE;
 
-	memset(cmd_buf, 0, CMD_BUFFER_SIZE);
-
 	entry = (u64)virt_to_phys(cmd_buf);
 	entry |= MMIO_CMD_SIZE_512;
 	memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
@@ -302,11 +414,10 @@ static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
 
 static void __init free_command_buffer(struct amd_iommu *iommu)
 {
-	if (iommu->cmd_buf)
-		free_pages((unsigned long)iommu->cmd_buf,
-				get_order(CMD_BUFFER_SIZE));
+	free_pages((unsigned long)iommu->cmd_buf, get_order(CMD_BUFFER_SIZE));
 }
 
+/* sets a specific bit in the device table entry. */
 static void set_dev_entry_bit(u16 devid, u8 bit)
 {
 	int i = (bit >> 5) & 0x07;
@@ -315,7 +426,18 @@ static void set_dev_entry_bit(u16 devid, u8 bit)
 	amd_iommu_dev_table[devid].data[i] |= (1 << _bit);
 }
 
-static void __init set_dev_entry_from_acpi(u16 devid, u32 flags, u32 ext_flags)
+/* Writes the specific IOMMU for a device into the rlookup table */
+static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid)
+{
+	amd_iommu_rlookup_table[devid] = iommu;
+}
+
+/*
+ * This function takes the device specific flags read from the ACPI
+ * table and sets up the device table entry with that information
+ */
+static void __init set_dev_entry_from_acpi(struct amd_iommu *iommu,
+					   u16 devid, u32 flags, u32 ext_flags)
 {
 	if (flags & ACPI_DEVFLAG_INITPASS)
 		set_dev_entry_bit(devid, DEV_ENTRY_INIT_PASS);
@@ -331,13 +453,14 @@ static void __init set_dev_entry_from_acpi(u16 devid, u32 flags, u32 ext_flags)
 		set_dev_entry_bit(devid, DEV_ENTRY_LINT0_PASS);
 	if (flags & ACPI_DEVFLAG_LINT1)
 		set_dev_entry_bit(devid, DEV_ENTRY_LINT1_PASS);
-}
 
-static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid)
-{
-	amd_iommu_rlookup_table[devid] = iommu;
+	set_iommu_for_device(iommu, devid);
 }
 
+/*
+ * Reads the device exclusion range from ACPI and initialize IOMMU with
+ * it
+ */
 static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m)
 {
 	struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
@@ -346,12 +469,22 @@ static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m)
 		return;
 
 	if (iommu) {
+		/*
+		 * We only can configure exclusion ranges per IOMMU, not
+		 * per device. But we can enable the exclusion range per
+		 * device. This is done here
+		 */
 		set_dev_entry_bit(m->devid, DEV_ENTRY_EX);
 		iommu->exclusion_start = m->range_start;
 		iommu->exclusion_length = m->range_length;
 	}
 }
 
+/*
+ * This function reads some important data from the IOMMU PCI space and
+ * initializes the driver data structure with it. It reads the hardware
+ * capabilities and the first/last device entries
+ */
 static void __init init_iommu_from_pci(struct amd_iommu *iommu)
 {
 	int bus = PCI_BUS(iommu->devid);
@@ -363,10 +496,16 @@ static void __init init_iommu_from_pci(struct amd_iommu *iommu)
 	iommu->cap = read_pci_config(bus, dev, fn, cap_ptr+MMIO_CAP_HDR_OFFSET);
 
 	range = read_pci_config(bus, dev, fn, cap_ptr+MMIO_RANGE_OFFSET);
-	iommu->first_device = DEVID(MMIO_GET_BUS(range), MMIO_GET_FD(range));
-	iommu->last_device = DEVID(MMIO_GET_BUS(range), MMIO_GET_LD(range));
+	iommu->first_device = calc_devid(MMIO_GET_BUS(range),
+					 MMIO_GET_FD(range));
+	iommu->last_device = calc_devid(MMIO_GET_BUS(range),
+					MMIO_GET_LD(range));
 }
 
+/*
+ * Takes a pointer to an AMD IOMMU entry in the ACPI table and
+ * initializes the hardware and our data structures with it.
+ */
 static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 					struct ivhd_header *h)
 {
@@ -374,7 +513,7 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 	u8 *end = p, flags = 0;
 	u16 dev_i, devid = 0, devid_start = 0, devid_to = 0;
 	u32 ext_flags = 0;
-	bool alias = 0;
+	bool alias = false;
 	struct ivhd_entry *e;
 
 	/*
@@ -414,22 +553,23 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 		case IVHD_DEV_ALL:
 			for (dev_i = iommu->first_device;
 					dev_i <= iommu->last_device; ++dev_i)
-				set_dev_entry_from_acpi(dev_i, e->flags, 0);
+				set_dev_entry_from_acpi(iommu, dev_i,
+							e->flags, 0);
 			break;
 		case IVHD_DEV_SELECT:
 			devid = e->devid;
-			set_dev_entry_from_acpi(devid, e->flags, 0);
+			set_dev_entry_from_acpi(iommu, devid, e->flags, 0);
 			break;
 		case IVHD_DEV_SELECT_RANGE_START:
 			devid_start = e->devid;
 			flags = e->flags;
 			ext_flags = 0;
-			alias = 0;
+			alias = false;
 			break;
 		case IVHD_DEV_ALIAS:
 			devid = e->devid;
 			devid_to = e->ext >> 8;
-			set_dev_entry_from_acpi(devid, e->flags, 0);
+			set_dev_entry_from_acpi(iommu, devid, e->flags, 0);
 			amd_iommu_alias_table[devid] = devid_to;
 			break;
 		case IVHD_DEV_ALIAS_RANGE:
@@ -437,24 +577,25 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 			flags = e->flags;
 			devid_to = e->ext >> 8;
 			ext_flags = 0;
-			alias = 1;
+			alias = true;
 			break;
 		case IVHD_DEV_EXT_SELECT:
 			devid = e->devid;
-			set_dev_entry_from_acpi(devid, e->flags, e->ext);
+			set_dev_entry_from_acpi(iommu, devid, e->flags,
+						e->ext);
 			break;
 		case IVHD_DEV_EXT_SELECT_RANGE:
 			devid_start = e->devid;
 			flags = e->flags;
 			ext_flags = e->ext;
-			alias = 0;
+			alias = false;
 			break;
 		case IVHD_DEV_RANGE_END:
 			devid = e->devid;
 			for (dev_i = devid_start; dev_i <= devid; ++dev_i) {
 				if (alias)
 					amd_iommu_alias_table[dev_i] = devid_to;
-				set_dev_entry_from_acpi(
+				set_dev_entry_from_acpi(iommu,
 						amd_iommu_alias_table[dev_i],
 						flags, ext_flags);
 			}
@@ -467,6 +608,7 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
 	}
 }
 
+/* Initializes the device->iommu mapping for the driver */
 static int __init init_iommu_devices(struct amd_iommu *iommu)
 {
 	u16 i;
@@ -494,6 +636,11 @@ static void __init free_iommu_all(void)
 	}
 }
 
+/*
+ * This function clues the initialization function for one IOMMU
+ * together and also allocates the command buffer and programs the
+ * hardware. It does NOT enable the IOMMU. This is done afterwards.
+ */
 static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
 {
 	spin_lock_init(&iommu->lock);
@@ -521,6 +668,10 @@ static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
 	return 0;
 }
 
+/*
+ * Iterates over all IOMMU entries in the ACPI table, allocates the
+ * IOMMU structure and initializes it with init_iommu_one()
+ */
 static int __init init_iommu_all(struct acpi_table_header *table)
 {
 	u8 *p = (u8 *)table, *end = (u8 *)table;
@@ -528,8 +679,6 @@ static int __init init_iommu_all(struct acpi_table_header *table)
 	struct amd_iommu *iommu;
 	int ret;
 
-	INIT_LIST_HEAD(&amd_iommu_list);
-
 	end += table->length;
 	p += IVRS_HEADER_LENGTH;
 
@@ -555,6 +704,14 @@ static int __init init_iommu_all(struct acpi_table_header *table)
 	return 0;
 }
 
+/****************************************************************************
+ *
+ * The next functions belong to the third pass of parsing the ACPI
+ * table. In this last pass the memory mapping requirements are
+ * gathered (like exclusion and unity mapping reanges).
+ *
+ ****************************************************************************/
+
 static void __init free_unity_maps(void)
 {
 	struct unity_map_entry *entry, *next;
@@ -565,6 +722,7 @@ static void __init free_unity_maps(void)
 	}
 }
 
+/* called when we find an exclusion range definition in ACPI */
 static int __init init_exclusion_range(struct ivmd_header *m)
 {
 	int i;
@@ -574,7 +732,7 @@ static int __init init_exclusion_range(struct ivmd_header *m)
 		set_device_exclusion_range(m->devid, m);
 		break;
 	case ACPI_IVMD_TYPE_ALL:
-		for (i = 0; i < amd_iommu_last_bdf; ++i)
+		for (i = 0; i <= amd_iommu_last_bdf; ++i)
 			set_device_exclusion_range(i, m);
 		break;
 	case ACPI_IVMD_TYPE_RANGE:
@@ -588,6 +746,7 @@ static int __init init_exclusion_range(struct ivmd_header *m)
 	return 0;
 }
 
+/* called for unity map ACPI definition */
 static int __init init_unity_map_range(struct ivmd_header *m)
 {
 	struct unity_map_entry *e = 0;
@@ -619,13 +778,12 @@ static int __init init_unity_map_range(struct ivmd_header *m)
 	return 0;
 }
 
+/* iterates over all memory definitions we find in the ACPI table */
 static int __init init_memory_definitions(struct acpi_table_header *table)
 {
 	u8 *p = (u8 *)table, *end = (u8 *)table;
 	struct ivmd_header *m;
 
-	INIT_LIST_HEAD(&amd_iommu_unity_map);
-
 	end += table->length;
 	p += IVRS_HEADER_LENGTH;
 
@@ -642,6 +800,10 @@ static int __init init_memory_definitions(struct acpi_table_header *table)
 	return 0;
 }
 
+/*
+ * This function finally enables all IOMMUs found in the system after
+ * they have been initialized
+ */
 static void __init enable_iommus(void)
 {
 	struct amd_iommu *iommu;
@@ -678,6 +840,34 @@ static struct sys_device device_amd_iommu = {
 	.cls = &amd_iommu_sysdev_class,
 };
 
+/*
+ * This is the core init function for AMD IOMMU hardware in the system.
+ * This function is called from the generic x86 DMA layer initialization
+ * code.
+ *
+ * This function basically parses the ACPI table for AMD IOMMU (IVRS)
+ * three times:
+ *
+ *	1 pass) Find the highest PCI device id the driver has to handle.
+ *		Upon this information the size of the data structures is
+ *		determined that needs to be allocated.
+ *
+ *	2 pass) Initialize the data structures just allocated with the
+ *		information in the ACPI table about available AMD IOMMUs
+ *		in the system. It also maps the PCI devices in the
+ *		system to specific IOMMUs
+ *
+ *	3 pass) After the basic data structures are allocated and
+ *		initialized we update them with information about memory
+ *		remapping requirements parsed out of the ACPI table in
+ *		this last pass.
+ *
+ * After that the hardware is initialized and ready to go. In the last
+ * step we do some Linux specific things like registering the driver in
+ * the dma_ops interface and initializing the suspend/resume support
+ * functions. Finally it prints some information about AMD IOMMUs and
+ * the driver state and enables the hardware.
+ */
 int __init amd_iommu_init(void)
 {
 	int i, ret = 0;
@@ -699,14 +889,14 @@ int __init amd_iommu_init(void)
 	if (acpi_table_parse("IVRS", find_last_devid_acpi) != 0)
 		return -ENODEV;
 
-	dev_table_size     = TBL_SIZE(DEV_TABLE_ENTRY_SIZE);
-	alias_table_size   = TBL_SIZE(ALIAS_TABLE_ENTRY_SIZE);
-	rlookup_table_size = TBL_SIZE(RLOOKUP_TABLE_ENTRY_SIZE);
+	dev_table_size     = tbl_size(DEV_TABLE_ENTRY_SIZE);
+	alias_table_size   = tbl_size(ALIAS_TABLE_ENTRY_SIZE);
+	rlookup_table_size = tbl_size(RLOOKUP_TABLE_ENTRY_SIZE);
 
 	ret = -ENOMEM;
 
 	/* Device table - directly used by all IOMMUs */
-	amd_iommu_dev_table = (void *)__get_free_pages(GFP_KERNEL,
+	amd_iommu_dev_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
 				      get_order(dev_table_size));
 	if (amd_iommu_dev_table == NULL)
 		goto out;
@@ -730,27 +920,23 @@ int __init amd_iommu_init(void)
 	 * Protection Domain table - maps devices to protection domains
 	 * This table has the same size as the rlookup_table
 	 */
-	amd_iommu_pd_table = (void *)__get_free_pages(GFP_KERNEL,
+	amd_iommu_pd_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
 				     get_order(rlookup_table_size));
 	if (amd_iommu_pd_table == NULL)
 		goto free;
 
-	amd_iommu_pd_alloc_bitmap = (void *)__get_free_pages(GFP_KERNEL,
+	amd_iommu_pd_alloc_bitmap = (void *)__get_free_pages(
+					    GFP_KERNEL | __GFP_ZERO,
 					    get_order(MAX_DOMAIN_ID/8));
 	if (amd_iommu_pd_alloc_bitmap == NULL)
 		goto free;
 
 	/*
-	 * memory is allocated now; initialize the device table with all zeroes
-	 * and let all alias entries point to itself
+	 * let all alias entries point to itself
 	 */
-	memset(amd_iommu_dev_table, 0, dev_table_size);
-	for (i = 0; i < amd_iommu_last_bdf; ++i)
+	for (i = 0; i <= amd_iommu_last_bdf; ++i)
 		amd_iommu_alias_table[i] = i;
 
-	memset(amd_iommu_pd_table, 0, rlookup_table_size);
-	memset(amd_iommu_pd_alloc_bitmap, 0, MAX_DOMAIN_ID / 8);
-
 	/*
 	 * never allocate domain 0 because its used as the non-allocated and
 	 * error value placeholder
@@ -795,24 +981,19 @@ out:
 	return ret;
 
 free:
-	if (amd_iommu_pd_alloc_bitmap)
-		free_pages((unsigned long)amd_iommu_pd_alloc_bitmap, 1);
+	free_pages((unsigned long)amd_iommu_pd_alloc_bitmap, 1);
 
-	if (amd_iommu_pd_table)
-		free_pages((unsigned long)amd_iommu_pd_table,
-				get_order(rlookup_table_size));
+	free_pages((unsigned long)amd_iommu_pd_table,
+		   get_order(rlookup_table_size));
 
-	if (amd_iommu_rlookup_table)
-		free_pages((unsigned long)amd_iommu_rlookup_table,
-				get_order(rlookup_table_size));
+	free_pages((unsigned long)amd_iommu_rlookup_table,
+		   get_order(rlookup_table_size));
 
-	if (amd_iommu_alias_table)
-		free_pages((unsigned long)amd_iommu_alias_table,
-				get_order(alias_table_size));
+	free_pages((unsigned long)amd_iommu_alias_table,
+		   get_order(alias_table_size));
 
-	if (amd_iommu_dev_table)
-		free_pages((unsigned long)amd_iommu_dev_table,
-				get_order(dev_table_size));
+	free_pages((unsigned long)amd_iommu_dev_table,
+		   get_order(dev_table_size));
 
 	free_iommu_all();
 
@@ -821,6 +1002,13 @@ free:
 	goto out;
 }
 
+/****************************************************************************
+ *
+ * Early detect code. This code runs at IOMMU detection time in the DMA
+ * layer. It just looks if there is an IVRS ACPI table to detect AMD
+ * IOMMUs
+ *
+ ****************************************************************************/
 static int __init early_amd_iommu_detect(struct acpi_table_header *table)
 {
 	return 0;
@@ -828,7 +1016,7 @@ static int __init early_amd_iommu_detect(struct acpi_table_header *table)
 
 void __init amd_iommu_detect(void)
 {
-	if (swiotlb || no_iommu || iommu_detected)
+	if (swiotlb || no_iommu || (iommu_detected && !gart_iommu_aperture))
 		return;
 
 	if (acpi_table_parse("IVRS", early_amd_iommu_detect) == 0) {
@@ -841,6 +1029,13 @@ void __init amd_iommu_detect(void)
 	}
 }
 
+/****************************************************************************
+ *
+ * Parsing functions for the AMD IOMMU specific kernel command line
+ * options.
+ *
+ ****************************************************************************/
+
 static int __init parse_amd_iommu_options(char *str)
 {
 	for (; *str; ++str) {
@@ -853,20 +1048,10 @@ static int __init parse_amd_iommu_options(char *str)
 
 static int __init parse_amd_iommu_size_options(char *str)
 {
-	for (; *str; ++str) {
-		if (strcmp(str, "32M") == 0)
-			amd_iommu_aperture_order = 25;
-		if (strcmp(str, "64M") == 0)
-			amd_iommu_aperture_order = 26;
-		if (strcmp(str, "128M") == 0)
-			amd_iommu_aperture_order = 27;
-		if (strcmp(str, "256M") == 0)
-			amd_iommu_aperture_order = 28;
-		if (strcmp(str, "512M") == 0)
-			amd_iommu_aperture_order = 29;
-		if (strcmp(str, "1G") == 0)
-			amd_iommu_aperture_order = 30;
-	}
+	unsigned order = PAGE_SHIFT + get_order(memparse(str, &str));
+
+	if ((order > 24) && (order < 31))
+		amd_iommu_aperture_order = order;
 
 	return 1;
 }
diff --git a/arch/x86/kernel/aperture_64.c b/arch/x86/kernel/aperture_64.c
index 9f907806c1a5..44e21826db11 100644
--- a/arch/x86/kernel/aperture_64.c
+++ b/arch/x86/kernel/aperture_64.c
@@ -21,6 +21,7 @@
 #include <linux/suspend.h>
 #include <asm/e820.h>
 #include <asm/io.h>
+#include <asm/iommu.h>
 #include <asm/gart.h>
 #include <asm/pci-direct.h>
 #include <asm/dma.h>
diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c
index 3e58b676d23b..d6c898358371 100644
--- a/arch/x86/kernel/apic_32.c
+++ b/arch/x86/kernel/apic_32.c
@@ -75,7 +75,7 @@ char system_vectors[NR_VECTORS] = { [0 ... NR_VECTORS-1] = SYS_VECTOR_FREE};
 /*
  * Debug level, exported for io_apic.c
  */
-int apic_verbosity;
+unsigned int apic_verbosity;
 
 int pic_mode;
 
@@ -177,7 +177,7 @@ void __cpuinit enable_NMI_through_LVT0(void)
 	/* Level triggered for 82489DX */
 	if (!lapic_is_integrated())
 		v |= APIC_LVT_LEVEL_TRIGGER;
-	apic_write_around(APIC_LVT0, v);
+	apic_write(APIC_LVT0, v);
 }
 
 /**
@@ -212,9 +212,6 @@ int lapic_get_maxlvt(void)
  * this function twice on the boot CPU, once with a bogus timeout
  * value, second time for real. The other (noncalibrating) CPUs
  * call this function only once, with the real, calibrated value.
- *
- * We do reads before writes even if unnecessary, to get around the
- * P5 APIC double write bug.
  */
 static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
 {
@@ -229,18 +226,18 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
 	if (!irqen)
 		lvtt_value |= APIC_LVT_MASKED;
 
-	apic_write_around(APIC_LVTT, lvtt_value);
+	apic_write(APIC_LVTT, lvtt_value);
 
 	/*
 	 * Divide PICLK by 16
 	 */
 	tmp_value = apic_read(APIC_TDCR);
-	apic_write_around(APIC_TDCR, (tmp_value
-				& ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
-				| APIC_TDR_DIV_16);
+	apic_write(APIC_TDCR,
+		   (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
+		   APIC_TDR_DIV_16);
 
 	if (!oneshot)
-		apic_write_around(APIC_TMICT, clocks/APIC_DIVISOR);
+		apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
 }
 
 /*
@@ -249,7 +246,7 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
 static int lapic_next_event(unsigned long delta,
 			    struct clock_event_device *evt)
 {
-	apic_write_around(APIC_TMICT, delta);
+	apic_write(APIC_TMICT, delta);
 	return 0;
 }
 
@@ -278,7 +275,7 @@ static void lapic_timer_setup(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_SHUTDOWN:
 		v = apic_read(APIC_LVTT);
 		v |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
-		apic_write_around(APIC_LVTT, v);
+		apic_write(APIC_LVTT, v);
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		/* Nothing to do here */
@@ -372,12 +369,7 @@ static void __init lapic_cal_handler(struct clock_event_device *dev)
 	}
 }
 
-/*
- * Setup the boot APIC
- *
- * Calibrate and verify the result.
- */
-void __init setup_boot_APIC_clock(void)
+static int __init calibrate_APIC_clock(void)
 {
 	struct clock_event_device *levt = &__get_cpu_var(lapic_events);
 	const long pm_100ms = PMTMR_TICKS_PER_SEC/10;
@@ -387,24 +379,6 @@ void __init setup_boot_APIC_clock(void)
 	long delta, deltapm;
 	int pm_referenced = 0;
 
-	/*
-	 * The local apic timer can be disabled via the kernel
-	 * commandline or from the CPU detection code. Register the lapic
-	 * timer as a dummy clock event source on SMP systems, so the
-	 * broadcast mechanism is used. On UP systems simply ignore it.
-	 */
-	if (local_apic_timer_disabled) {
-		/* No broadcast on UP ! */
-		if (num_possible_cpus() > 1) {
-			lapic_clockevent.mult = 1;
-			setup_APIC_timer();
-		}
-		return;
-	}
-
-	apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
-		    "calibrating APIC timer ...\n");
-
 	local_irq_disable();
 
 	/* Replace the global interrupt handler */
@@ -489,8 +463,6 @@ void __init setup_boot_APIC_clock(void)
 		    calibration_result / (1000000 / HZ),
 		    calibration_result % (1000000 / HZ));
 
-	local_apic_timer_verify_ok = 1;
-
 	/*
 	 * Do a sanity check on the APIC calibration result
 	 */
@@ -498,12 +470,11 @@ void __init setup_boot_APIC_clock(void)
 		local_irq_enable();
 		printk(KERN_WARNING
 		       "APIC frequency too slow, disabling apic timer\n");
-		/* No broadcast on UP ! */
-		if (num_possible_cpus() > 1)
-			setup_APIC_timer();
-		return;
+		return -1;
 	}
 
+	local_apic_timer_verify_ok = 1;
+
 	/* We trust the pm timer based calibration */
 	if (!pm_referenced) {
 		apic_printk(APIC_VERBOSE, "... verify APIC timer\n");
@@ -543,22 +514,55 @@ void __init setup_boot_APIC_clock(void)
 	if (!local_apic_timer_verify_ok) {
 		printk(KERN_WARNING
 		       "APIC timer disabled due to verification failure.\n");
+			return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Setup the boot APIC
+ *
+ * Calibrate and verify the result.
+ */
+void __init setup_boot_APIC_clock(void)
+{
+	/*
+	 * The local apic timer can be disabled via the kernel
+	 * commandline or from the CPU detection code. Register the lapic
+	 * timer as a dummy clock event source on SMP systems, so the
+	 * broadcast mechanism is used. On UP systems simply ignore it.
+	 */
+	if (local_apic_timer_disabled) {
 		/* No broadcast on UP ! */
-		if (num_possible_cpus() == 1)
-			return;
-	} else {
-		/*
-		 * If nmi_watchdog is set to IO_APIC, we need the
-		 * PIT/HPET going.  Otherwise register lapic as a dummy
-		 * device.
-		 */
-		if (nmi_watchdog != NMI_IO_APIC)
-			lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
-		else
-			printk(KERN_WARNING "APIC timer registered as dummy,"
-				" due to nmi_watchdog=%d!\n", nmi_watchdog);
+		if (num_possible_cpus() > 1) {
+			lapic_clockevent.mult = 1;
+			setup_APIC_timer();
+		}
+		return;
+	}
+
+	apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
+		    "calibrating APIC timer ...\n");
+
+	if (calibrate_APIC_clock()) {
+		/* No broadcast on UP ! */
+		if (num_possible_cpus() > 1)
+			setup_APIC_timer();
+		return;
 	}
 
+	/*
+	 * If nmi_watchdog is set to IO_APIC, we need the
+	 * PIT/HPET going.  Otherwise register lapic as a dummy
+	 * device.
+	 */
+	if (nmi_watchdog != NMI_IO_APIC)
+		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_DUMMY;
+	else
+		printk(KERN_WARNING "APIC timer registered as dummy,"
+			" due to nmi_watchdog=%d!\n", nmi_watchdog);
+
 	/* Setup the lapic or request the broadcast */
 	setup_APIC_timer();
 }
@@ -693,44 +697,44 @@ void clear_local_APIC(void)
 	 */
 	if (maxlvt >= 3) {
 		v = ERROR_APIC_VECTOR; /* any non-zero vector will do */
-		apic_write_around(APIC_LVTERR, v | APIC_LVT_MASKED);
+		apic_write(APIC_LVTERR, v | APIC_LVT_MASKED);
 	}
 	/*
 	 * Careful: we have to set masks only first to deassert
 	 * any level-triggered sources.
 	 */
 	v = apic_read(APIC_LVTT);
-	apic_write_around(APIC_LVTT, v | APIC_LVT_MASKED);
+	apic_write(APIC_LVTT, v | APIC_LVT_MASKED);
 	v = apic_read(APIC_LVT0);
-	apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
 	v = apic_read(APIC_LVT1);
-	apic_write_around(APIC_LVT1, v | APIC_LVT_MASKED);
+	apic_write(APIC_LVT1, v | APIC_LVT_MASKED);
 	if (maxlvt >= 4) {
 		v = apic_read(APIC_LVTPC);
-		apic_write_around(APIC_LVTPC, v | APIC_LVT_MASKED);
+		apic_write(APIC_LVTPC, v | APIC_LVT_MASKED);
 	}
 
 	/* lets not touch this if we didn't frob it */
 #ifdef CONFIG_X86_MCE_P4THERMAL
 	if (maxlvt >= 5) {
 		v = apic_read(APIC_LVTTHMR);
-		apic_write_around(APIC_LVTTHMR, v | APIC_LVT_MASKED);
+		apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
 	}
 #endif
 	/*
 	 * Clean APIC state for other OSs:
 	 */
-	apic_write_around(APIC_LVTT, APIC_LVT_MASKED);
-	apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
-	apic_write_around(APIC_LVT1, APIC_LVT_MASKED);
+	apic_write(APIC_LVTT, APIC_LVT_MASKED);
+	apic_write(APIC_LVT0, APIC_LVT_MASKED);
+	apic_write(APIC_LVT1, APIC_LVT_MASKED);
 	if (maxlvt >= 3)
-		apic_write_around(APIC_LVTERR, APIC_LVT_MASKED);
+		apic_write(APIC_LVTERR, APIC_LVT_MASKED);
 	if (maxlvt >= 4)
-		apic_write_around(APIC_LVTPC, APIC_LVT_MASKED);
+		apic_write(APIC_LVTPC, APIC_LVT_MASKED);
 
 #ifdef CONFIG_X86_MCE_P4THERMAL
 	if (maxlvt >= 5)
-		apic_write_around(APIC_LVTTHMR, APIC_LVT_MASKED);
+		apic_write(APIC_LVTTHMR, APIC_LVT_MASKED);
 #endif
 	/* Integrated APIC (!82489DX) ? */
 	if (lapic_is_integrated()) {
@@ -756,7 +760,7 @@ void disable_local_APIC(void)
 	 */
 	value = apic_read(APIC_SPIV);
 	value &= ~APIC_SPIV_APIC_ENABLED;
-	apic_write_around(APIC_SPIV, value);
+	apic_write(APIC_SPIV, value);
 
 	/*
 	 * When LAPIC was disabled by the BIOS and enabled by the kernel,
@@ -865,8 +869,8 @@ void __init sync_Arb_IDs(void)
 	apic_wait_icr_idle();
 
 	apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
-	apic_write_around(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
-				| APIC_DM_INIT);
+	apic_write(APIC_ICR,
+		   APIC_DEST_ALLINC | APIC_INT_LEVELTRIG | APIC_DM_INIT);
 }
 
 /*
@@ -902,16 +906,16 @@ void __init init_bsp_APIC(void)
 	else
 		value |= APIC_SPIV_FOCUS_DISABLED;
 	value |= SPURIOUS_APIC_VECTOR;
-	apic_write_around(APIC_SPIV, value);
+	apic_write(APIC_SPIV, value);
 
 	/*
 	 * Set up the virtual wire mode.
 	 */
-	apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+	apic_write(APIC_LVT0, APIC_DM_EXTINT);
 	value = APIC_DM_NMI;
 	if (!lapic_is_integrated())		/* 82489DX */
 		value |= APIC_LVT_LEVEL_TRIGGER;
-	apic_write_around(APIC_LVT1, value);
+	apic_write(APIC_LVT1, value);
 }
 
 static void __cpuinit lapic_setup_esr(void)
@@ -926,7 +930,7 @@ static void __cpuinit lapic_setup_esr(void)
 
 		/* enables sending errors */
 		value = ERROR_APIC_VECTOR;
-		apic_write_around(APIC_LVTERR, value);
+		apic_write(APIC_LVTERR, value);
 		/*
 		 * spec says clear errors after enabling vector.
 		 */
@@ -989,7 +993,7 @@ void __cpuinit setup_local_APIC(void)
 	 */
 	value = apic_read(APIC_TASKPRI);
 	value &= ~APIC_TPRI_MASK;
-	apic_write_around(APIC_TASKPRI, value);
+	apic_write(APIC_TASKPRI, value);
 
 	/*
 	 * After a crash, we no longer service the interrupts and a pending
@@ -1047,7 +1051,7 @@ void __cpuinit setup_local_APIC(void)
 	 * Set spurious IRQ vector
 	 */
 	value |= SPURIOUS_APIC_VECTOR;
-	apic_write_around(APIC_SPIV, value);
+	apic_write(APIC_SPIV, value);
 
 	/*
 	 * Set up LVT0, LVT1:
@@ -1069,7 +1073,7 @@ void __cpuinit setup_local_APIC(void)
 		apic_printk(APIC_VERBOSE, "masked ExtINT on CPU#%d\n",
 				smp_processor_id());
 	}
-	apic_write_around(APIC_LVT0, value);
+	apic_write(APIC_LVT0, value);
 
 	/*
 	 * only the BP should see the LINT1 NMI signal, obviously.
@@ -1080,7 +1084,7 @@ void __cpuinit setup_local_APIC(void)
 		value = APIC_DM_NMI | APIC_LVT_MASKED;
 	if (!integrated)		/* 82489DX */
 		value |= APIC_LVT_LEVEL_TRIGGER;
-	apic_write_around(APIC_LVT1, value);
+	apic_write(APIC_LVT1, value);
 }
 
 void __cpuinit end_local_APIC_setup(void)
@@ -1091,7 +1095,7 @@ void __cpuinit end_local_APIC_setup(void)
 	/* Disable the local apic timer */
 	value = apic_read(APIC_LVTT);
 	value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
-	apic_write_around(APIC_LVTT, value);
+	apic_write(APIC_LVTT, value);
 
 	setup_apic_nmi_watchdog(NULL);
 	apic_pm_activate();
@@ -1214,9 +1218,6 @@ int apic_version[MAX_APICS];
 
 int __init APIC_init_uniprocessor(void)
 {
-	if (disable_apic)
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
-
 	if (!smp_found_config && !cpu_has_apic)
 		return -1;
 
@@ -1340,6 +1341,10 @@ void __init smp_intr_init(void)
 
 	/* IPI for generic function call */
 	alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+
+	/* IPI for single call function */
+	set_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
+				call_function_single_interrupt);
 }
 #endif
 
@@ -1415,7 +1420,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 		value &= ~APIC_VECTOR_MASK;
 		value |= APIC_SPIV_APIC_ENABLED;
 		value |= 0xf;
-		apic_write_around(APIC_SPIV, value);
+		apic_write(APIC_SPIV, value);
 
 		if (!virt_wire_setup) {
 			/*
@@ -1428,10 +1433,10 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 				APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
 			value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
 			value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_EXTINT);
-			apic_write_around(APIC_LVT0, value);
+			apic_write(APIC_LVT0, value);
 		} else {
 			/* Disable LVT0 */
-			apic_write_around(APIC_LVT0, APIC_LVT_MASKED);
+			apic_write(APIC_LVT0, APIC_LVT_MASKED);
 		}
 
 		/*
@@ -1445,7 +1450,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
 			APIC_LVT_LEVEL_TRIGGER | APIC_LVT_MASKED);
 		value |= APIC_LVT_REMOTE_IRR | APIC_SEND_PENDING;
 		value = SET_APIC_DELIVERY_MODE(value, APIC_MODE_NMI);
-		apic_write_around(APIC_LVT1, value);
+		apic_write(APIC_LVT1, value);
 	}
 }
 
@@ -1696,7 +1701,7 @@ early_param("lapic", parse_lapic);
 static int __init parse_nolapic(char *arg)
 {
 	disable_apic = 1;
-	clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+	setup_clear_cpu_cap(X86_FEATURE_APIC);
 	return 0;
 }
 early_param("nolapic", parse_nolapic);
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index 1e3d32e27c14..7f1f030da7ee 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -54,7 +54,7 @@ EXPORT_SYMBOL_GPL(local_apic_timer_c2_ok);
 /*
  * Debug level, exported for io_apic.c
  */
-int apic_verbosity;
+unsigned int apic_verbosity;
 
 /* Have we found an MP table */
 int smp_found_config;
@@ -314,7 +314,7 @@ static void setup_APIC_timer(void)
 
 #define TICK_COUNT 100000000
 
-static void __init calibrate_APIC_clock(void)
+static int __init calibrate_APIC_clock(void)
 {
 	unsigned apic, apic_start;
 	unsigned long tsc, tsc_start;
@@ -368,6 +368,17 @@ static void __init calibrate_APIC_clock(void)
 		clockevent_delta2ns(0xF, &lapic_clockevent);
 
 	calibration_result = result / HZ;
+
+	/*
+	 * Do a sanity check on the APIC calibration result
+	 */
+	if (calibration_result < (1000000 / HZ)) {
+		printk(KERN_WARNING
+			"APIC frequency too slow, disabling apic timer\n");
+		return -1;
+	}
+
+	return 0;
 }
 
 /*
@@ -394,14 +405,7 @@ void __init setup_boot_APIC_clock(void)
 	}
 
 	printk(KERN_INFO "Using local APIC timer interrupts.\n");
-	calibrate_APIC_clock();
-
-	/*
-	 * Do a sanity check on the APIC calibration result
-	 */
-	if (calibration_result < (1000000 / HZ)) {
-		printk(KERN_WARNING
-		       "APIC frequency too slow, disabling apic timer\n");
+	if (calibrate_APIC_clock()) {
 		/* No broadcast on UP ! */
 		if (num_possible_cpus() > 1)
 			setup_APIC_timer();
@@ -1337,7 +1341,7 @@ early_param("apic", apic_set_verbosity);
 static __init int setup_disableapic(char *str)
 {
 	disable_apic = 1;
-	clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+	setup_clear_cpu_cap(X86_FEATURE_APIC);
 	return 0;
 }
 early_param("disableapic", setup_disableapic);
diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c
index 75cb5da4ea0a..9ee24e6bc4b0 100644
--- a/arch/x86/kernel/apm_32.c
+++ b/arch/x86/kernel/apm_32.c
@@ -219,7 +219,6 @@
 #include <linux/time.h>
 #include <linux/sched.h>
 #include <linux/pm.h>
-#include <linux/pm_legacy.h>
 #include <linux/capability.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
@@ -1213,9 +1212,9 @@ static int suspend(int vetoable)
 	if (err != APM_SUCCESS)
 		apm_error("suspend", err);
 	err = (err == APM_SUCCESS) ? 0 : -EIO;
-	device_power_up();
+	device_power_up(PMSG_RESUME);
 	local_irq_enable();
-	device_resume();
+	device_resume(PMSG_RESUME);
 	queue_event(APM_NORMAL_RESUME, NULL);
 	spin_lock(&user_list_lock);
 	for (as = user_list; as != NULL; as = as->next) {
@@ -1240,7 +1239,7 @@ static void standby(void)
 		apm_error("standby", err);
 
 	local_irq_disable();
-	device_power_up();
+	device_power_up(PMSG_RESUME);
 	local_irq_enable();
 }
 
@@ -1326,7 +1325,7 @@ static void check_events(void)
 			ignore_bounce = 1;
 			if ((event != APM_NORMAL_RESUME)
 			    || (ignore_normal_resume == 0)) {
-				device_resume();
+				device_resume(PMSG_RESUME);
 				queue_event(event, NULL);
 			}
 			ignore_normal_resume = 0;
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index bacf5deeec2d..aa89387006fe 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -18,6 +18,8 @@
 #include <asm/ia32.h>
 #include <asm/bootparam.h>
 
+#include <xen/interface/xen.h>
+
 #define __NO_STUBS 1
 #undef __SYSCALL
 #undef _ASM_X86_64_UNISTD_H_
@@ -131,5 +133,14 @@ int main(void)
 	OFFSET(BP_loadflags, boot_params, hdr.loadflags);
 	OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch);
 	OFFSET(BP_version, boot_params, hdr.version);
+
+	BLANK();
+	DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
+#ifdef CONFIG_XEN
+	BLANK();
+	OFFSET(XEN_vcpu_info_mask, vcpu_info, evtchn_upcall_mask);
+	OFFSET(XEN_vcpu_info_pending, vcpu_info, evtchn_upcall_pending);
+#undef ENTRY
+#endif
 	return 0;
 }
diff --git a/arch/x86/kernel/bios_uv.c b/arch/x86/kernel/bios_uv.c
new file mode 100644
index 000000000000..c639bd55391c
--- /dev/null
+++ b/arch/x86/kernel/bios_uv.c
@@ -0,0 +1,48 @@
+/*
+ * BIOS run time interface routines.
+ *
+ *  Copyright (c) 2008 Silicon Graphics, Inc.  All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <asm/uv/bios.h>
+
+const char *
+x86_bios_strerror(long status)
+{
+	const char *str;
+	switch (status) {
+	case  0: str = "Call completed without error"; break;
+	case -1: str = "Not implemented"; break;
+	case -2: str = "Invalid argument"; break;
+	case -3: str = "Call completed with error"; break;
+	default: str = "Unknown BIOS status code"; break;
+	}
+	return str;
+}
+
+long
+x86_bios_freq_base(unsigned long which, unsigned long *ticks_per_second,
+		   unsigned long *drift_info)
+{
+	struct uv_bios_retval isrv;
+
+	BIOS_CALL(isrv, BIOS_FREQ_BASE, which, 0, 0, 0, 0, 0, 0);
+	*ticks_per_second = isrv.v0;
+	*drift_info = isrv.v1;
+	return isrv.status;
+}
+EXPORT_SYMBOL_GPL(x86_bios_freq_base);
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 81a07ca65d44..cae9cabc3031 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -24,8 +24,6 @@
 extern void vide(void);
 __asm__(".align 4\nvide: ret");
 
-int force_mwait __cpuinitdata;
-
 static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 {
 	if (cpuid_eax(0x80000000) >= 0x80000007) {
diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c
index 7c36fb8a28d4..d1692b2a41ff 100644
--- a/arch/x86/kernel/cpu/amd_64.c
+++ b/arch/x86/kernel/cpu/amd_64.c
@@ -115,6 +115,8 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 	/* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
 	if (c->x86_power & (1<<8))
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
+
+	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
 }
 
 static void __cpuinit init_amd(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 1b1c56bb338f..c9b58a806e85 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -131,13 +131,7 @@ static void __init check_popad(void)
  *   (for due to lack of "invlpg" and working WP on a i386)
  * - In order to run on anything without a TSC, we need to be
  *   compiled for a i486.
- * - In order to support the local APIC on a buggy Pentium machine,
- *   we need to be compiled with CONFIG_X86_GOOD_APIC disabled,
- *   which happens implicitly if compiled for a Pentium or lower
- *   (unless an advanced selection of CPU features is used) as an
- *   otherwise config implies a properly working local APIC without
- *   the need to do extra reads from the APIC.
-*/
+ */
 
 static void __init check_config(void)
 {
@@ -151,21 +145,6 @@ static void __init check_config(void)
 	if (boot_cpu_data.x86 == 3)
 		panic("Kernel requires i486+ for 'invlpg' and other features");
 #endif
-
-/*
- * If we were told we had a good local APIC, check for buggy Pentia,
- * i.e. all B steppings and the C2 stepping of P54C when using their
- * integrated APIC (see 11AP erratum in "Pentium Processor
- * Specification Update").
- */
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_GOOD_APIC)
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL
-	    && cpu_has_apic
-	    && boot_cpu_data.x86 == 5
-	    && boot_cpu_data.x86_model == 2
-	    && (boot_cpu_data.x86_mask < 6 || boot_cpu_data.x86_mask == 11))
-		panic("Kernel compiled for PMMX+, assumes a local APIC without the read-before-write bug!");
-#endif
 }
 
 
diff --git a/arch/x86/kernel/cpu/common_64.c b/arch/x86/kernel/cpu/common_64.c
index 7b8cc72feb40..dd6e3f15017e 100644
--- a/arch/x86/kernel/cpu/common_64.c
+++ b/arch/x86/kernel/cpu/common_64.c
@@ -7,15 +7,13 @@
 #include <linux/module.h>
 #include <linux/kgdb.h>
 #include <linux/topology.h>
-#include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/smp.h>
-#include <linux/module.h>
 #include <linux/percpu.h>
-#include <asm/processor.h>
 #include <asm/i387.h>
 #include <asm/msr.h>
 #include <asm/io.h>
+#include <asm/linkage.h>
 #include <asm/mmu_context.h>
 #include <asm/mtrr.h>
 #include <asm/mce.h>
@@ -305,7 +303,6 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
 			c->x86_capability[2] = cpuid_edx(0x80860001);
 	}
 
-	c->extended_cpuid_level = cpuid_eax(0x80000000);
 	if (c->extended_cpuid_level >= 0x80000007)
 		c->x86_power = cpuid_edx(0x80000007);
 
@@ -316,18 +313,11 @@ static void __cpuinit early_identify_cpu(struct cpuinfo_x86 *c)
 		c->x86_phys_bits = eax & 0xff;
 	}
 
-	/* Assume all 64-bit CPUs support 32-bit syscall */
-	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
-
 	if (c->x86_vendor != X86_VENDOR_UNKNOWN &&
 	    cpu_devs[c->x86_vendor]->c_early_init)
 		cpu_devs[c->x86_vendor]->c_early_init(c);
 
 	validate_pat_support(c);
-
-	/* early_param could clear that, but recall get it set again */
-	if (disable_apic)
-		clear_cpu_cap(c, X86_FEATURE_APIC);
 }
 
 /*
@@ -517,8 +507,7 @@ void pda_init(int cpu)
 }
 
 char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
-			   DEBUG_STKSZ]
-__attribute__((section(".bss.page_aligned")));
+			   DEBUG_STKSZ] __page_aligned_bss;
 
 extern asmlinkage void ignore_sysret(void);
 
diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
index b0c8208df9fa..dd097b835839 100644
--- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -202,7 +202,7 @@ static void drv_write(struct drv_cmd *cmd)
 	cpumask_t saved_mask = current->cpus_allowed;
 	unsigned int i;
 
-	for_each_cpu_mask(i, cmd->mask) {
+	for_each_cpu_mask_nr(i, cmd->mask) {
 		set_cpus_allowed_ptr(current, &cpumask_of_cpu(i));
 		do_drv_write(cmd);
 	}
@@ -451,7 +451,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 
 	freqs.old = perf->states[perf->state].core_frequency * 1000;
 	freqs.new = data->freq_table[next_state].frequency;
-	for_each_cpu_mask(i, cmd.mask) {
+	for_each_cpu_mask_nr(i, cmd.mask) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -466,7 +466,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
 		}
 	}
 
-	for_each_cpu_mask(i, cmd.mask) {
+	for_each_cpu_mask_nr(i, cmd.mask) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index 199e4e05e5dc..f1685fb91fbd 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -122,7 +122,7 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 		return 0;
 
 	/* notifiers */
-	for_each_cpu_mask(i, policy->cpus) {
+	for_each_cpu_mask_nr(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -130,11 +130,11 @@ static int cpufreq_p4_target(struct cpufreq_policy *policy,
 	/* run on each logical CPU, see section 13.15.3 of IA32 Intel Architecture Software
 	 * Developer's Manual, Volume 3
 	 */
-	for_each_cpu_mask(i, policy->cpus)
+	for_each_cpu_mask_nr(i, policy->cpus)
 		cpufreq_p4_setdc(i, p4clockmod_table[newstate].index);
 
 	/* notifiers */
-	for_each_cpu_mask(i, policy->cpus) {
+	for_each_cpu_mask_nr(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h
index f8a63b3664e3..35fb4eaf6e1c 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k7.h
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k7.h
@@ -1,5 +1,4 @@
 /*
- *  $Id: powernow-k7.h,v 1.2 2003/02/10 18:26:01 davej Exp $
  *  (C) 2003 Dave Jones.
  *
  *  Licensed under the terms of the GNU GPL License version 2.
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 206791eb46e3..c45ca6d4dce1 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -966,7 +966,7 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i
 	freqs.old = find_khz_freq_from_fid(data->currfid);
 	freqs.new = find_khz_freq_from_fid(fid);
 
-	for_each_cpu_mask(i, *(data->available_cores)) {
+	for_each_cpu_mask_nr(i, *(data->available_cores)) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -974,7 +974,7 @@ static int transition_frequency_fidvid(struct powernow_k8_data *data, unsigned i
 	res = transition_fid_vid(data, fid, vid);
 	freqs.new = find_khz_freq_from_fid(data->currfid);
 
-	for_each_cpu_mask(i, *(data->available_cores)) {
+	for_each_cpu_mask_nr(i, *(data->available_cores)) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
@@ -997,7 +997,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 	freqs.old = find_khz_freq_from_pstate(data->powernow_table, data->currpstate);
 	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
 
-	for_each_cpu_mask(i, *(data->available_cores)) {
+	for_each_cpu_mask_nr(i, *(data->available_cores)) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -1005,7 +1005,7 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, unsigned i
 	res = transition_pstate(data, pstate);
 	freqs.new = find_khz_freq_from_pstate(data->powernow_table, pstate);
 
-	for_each_cpu_mask(i, *(data->available_cores)) {
+	for_each_cpu_mask_nr(i, *(data->available_cores)) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
index 908dd347c67e..15e13c01cc36 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-centrino.c
@@ -28,7 +28,8 @@
 #define PFX		"speedstep-centrino: "
 #define MAINTAINER	"cpufreq@lists.linux.org.uk"
 
-#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
+#define dprintk(msg...) \
+	cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "speedstep-centrino", msg)
 
 #define INTEL_MSR_RANGE	(0xffff)
 
@@ -66,11 +67,12 @@ struct cpu_model
 
 	struct cpufreq_frequency_table *op_points; /* clock/voltage pairs */
 };
-static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x);
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
+				  const struct cpu_id *x);
 
 /* Operating points for current CPU */
-static struct cpu_model *centrino_model[NR_CPUS];
-static const struct cpu_id *centrino_cpu[NR_CPUS];
+static DEFINE_PER_CPU(struct cpu_model *, centrino_model);
+static DEFINE_PER_CPU(const struct cpu_id *, centrino_cpu);
 
 static struct cpufreq_driver centrino_driver;
 
@@ -255,7 +257,7 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy)
 		return -ENOENT;
 	}
 
-	centrino_model[policy->cpu] = model;
+	per_cpu(centrino_model, policy->cpu) = model;
 
 	dprintk("found \"%s\": max frequency: %dkHz\n",
 	       model->model_name, model->max_freq);
@@ -264,10 +266,14 @@ static int centrino_cpu_init_table(struct cpufreq_policy *policy)
 }
 
 #else
-static inline int centrino_cpu_init_table(struct cpufreq_policy *policy) { return -ENODEV; }
+static inline int centrino_cpu_init_table(struct cpufreq_policy *policy)
+{
+	return -ENODEV;
+}
 #endif /* CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE */
 
-static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c, const struct cpu_id *x)
+static int centrino_verify_cpu_id(const struct cpuinfo_x86 *c,
+				  const struct cpu_id *x)
 {
 	if ((c->x86 == x->x86) &&
 	    (c->x86_model == x->x86_model) &&
@@ -286,23 +292,28 @@ static unsigned extract_clock(unsigned msr, unsigned int cpu, int failsafe)
 	 * for centrino, as some DSDTs are buggy.
 	 * Ideally, this can be done using the acpi_data structure.
 	 */
-	if ((centrino_cpu[cpu] == &cpu_ids[CPU_BANIAS]) ||
-	    (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_A1]) ||
-	    (centrino_cpu[cpu] == &cpu_ids[CPU_DOTHAN_B0])) {
+	if ((per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_BANIAS]) ||
+	    (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_A1]) ||
+	    (per_cpu(centrino_cpu, cpu) == &cpu_ids[CPU_DOTHAN_B0])) {
 		msr = (msr >> 8) & 0xff;
 		return msr * 100000;
 	}
 
-	if ((!centrino_model[cpu]) || (!centrino_model[cpu]->op_points))
+	if ((!per_cpu(centrino_model, cpu)) ||
+	    (!per_cpu(centrino_model, cpu)->op_points))
 		return 0;
 
 	msr &= 0xffff;
-	for (i=0;centrino_model[cpu]->op_points[i].frequency != CPUFREQ_TABLE_END; i++) {
-		if (msr == centrino_model[cpu]->op_points[i].index)
-			return centrino_model[cpu]->op_points[i].frequency;
+	for (i = 0;
+		per_cpu(centrino_model, cpu)->op_points[i].frequency
+							!= CPUFREQ_TABLE_END;
+	     i++) {
+		if (msr == per_cpu(centrino_model, cpu)->op_points[i].index)
+			return per_cpu(centrino_model, cpu)->
+							op_points[i].frequency;
 	}
 	if (failsafe)
-		return centrino_model[cpu]->op_points[i-1].frequency;
+		return per_cpu(centrino_model, cpu)->op_points[i-1].frequency;
 	else
 		return 0;
 }
@@ -347,7 +358,8 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
 	int i;
 
 	/* Only Intel makes Enhanced Speedstep-capable CPUs */
-	if (cpu->x86_vendor != X86_VENDOR_INTEL || !cpu_has(cpu, X86_FEATURE_EST))
+	if (cpu->x86_vendor != X86_VENDOR_INTEL ||
+	    !cpu_has(cpu, X86_FEATURE_EST))
 		return -ENODEV;
 
 	if (cpu_has(cpu, X86_FEATURE_CONSTANT_TSC))
@@ -361,9 +373,9 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
 			break;
 
 	if (i != N_IDS)
-		centrino_cpu[policy->cpu] = &cpu_ids[i];
+		per_cpu(centrino_cpu, policy->cpu) = &cpu_ids[i];
 
-	if (!centrino_cpu[policy->cpu]) {
+	if (!per_cpu(centrino_cpu, policy->cpu)) {
 		dprintk("found unsupported CPU with "
 		"Enhanced SpeedStep: send /proc/cpuinfo to "
 		MAINTAINER "\n");
@@ -386,23 +398,26 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
 		/* check to see if it stuck */
 		rdmsr(MSR_IA32_MISC_ENABLE, l, h);
 		if (!(l & (1<<16))) {
-			printk(KERN_INFO PFX "couldn't enable Enhanced SpeedStep\n");
+			printk(KERN_INFO PFX
+				"couldn't enable Enhanced SpeedStep\n");
 			return -ENODEV;
 		}
 	}
 
 	freq = get_cur_freq(policy->cpu);
-
-	policy->cpuinfo.transition_latency = 10000; /* 10uS transition latency */
+	policy->cpuinfo.transition_latency = 10000;
+						/* 10uS transition latency */
 	policy->cur = freq;
 
 	dprintk("centrino_cpu_init: cur=%dkHz\n", policy->cur);
 
-	ret = cpufreq_frequency_table_cpuinfo(policy, centrino_model[policy->cpu]->op_points);
+	ret = cpufreq_frequency_table_cpuinfo(policy,
+		per_cpu(centrino_model, policy->cpu)->op_points);
 	if (ret)
 		return (ret);
 
-	cpufreq_frequency_table_get_attr(centrino_model[policy->cpu]->op_points, policy->cpu);
+	cpufreq_frequency_table_get_attr(
+		per_cpu(centrino_model, policy->cpu)->op_points, policy->cpu);
 
 	return 0;
 }
@@ -411,12 +426,12 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy)
 {
 	unsigned int cpu = policy->cpu;
 
-	if (!centrino_model[cpu])
+	if (!per_cpu(centrino_model, cpu))
 		return -ENODEV;
 
 	cpufreq_frequency_table_put_attr(cpu);
 
-	centrino_model[cpu] = NULL;
+	per_cpu(centrino_model, cpu) = NULL;
 
 	return 0;
 }
@@ -430,17 +445,26 @@ static int centrino_cpu_exit(struct cpufreq_policy *policy)
  */
 static int centrino_verify (struct cpufreq_policy *policy)
 {
-	return cpufreq_frequency_table_verify(policy, centrino_model[policy->cpu]->op_points);
+	return cpufreq_frequency_table_verify(policy,
+			per_cpu(centrino_model, policy->cpu)->op_points);
 }
 
 /**
  * centrino_setpolicy - set a new CPUFreq policy
  * @policy: new policy
  * @target_freq: the target frequency
- * @relation: how that frequency relates to achieved frequency (CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
+ * @relation: how that frequency relates to achieved frequency
+ *	(CPUFREQ_RELATION_L or CPUFREQ_RELATION_H)
  *
  * Sets a new CPUFreq policy.
  */
+struct allmasks {
+	cpumask_t		online_policy_cpus;
+	cpumask_t		saved_mask;
+	cpumask_t		set_mask;
+	cpumask_t		covered_cpus;
+};
+
 static int centrino_target (struct cpufreq_policy *policy,
 			    unsigned int target_freq,
 			    unsigned int relation)
@@ -448,48 +472,55 @@ static int centrino_target (struct cpufreq_policy *policy,
 	unsigned int    newstate = 0;
 	unsigned int	msr, oldmsr = 0, h = 0, cpu = policy->cpu;
 	struct cpufreq_freqs	freqs;
-	cpumask_t		online_policy_cpus;
-	cpumask_t		saved_mask;
-	cpumask_t		set_mask;
-	cpumask_t		covered_cpus;
 	int			retval = 0;
 	unsigned int		j, k, first_cpu, tmp;
-
-	if (unlikely(centrino_model[cpu] == NULL))
-		return -ENODEV;
+	CPUMASK_ALLOC(allmasks);
+	CPUMASK_PTR(online_policy_cpus, allmasks);
+	CPUMASK_PTR(saved_mask, allmasks);
+	CPUMASK_PTR(set_mask, allmasks);
+	CPUMASK_PTR(covered_cpus, allmasks);
+
+	if (unlikely(allmasks == NULL))
+		return -ENOMEM;
+
+	if (unlikely(per_cpu(centrino_model, cpu) == NULL)) {
+		retval = -ENODEV;
+		goto out;
+	}
 
 	if (unlikely(cpufreq_frequency_table_target(policy,
-			centrino_model[cpu]->op_points,
+			per_cpu(centrino_model, cpu)->op_points,
 			target_freq,
 			relation,
 			&newstate))) {
-		return -EINVAL;
+		retval = -EINVAL;
+		goto out;
 	}
 
 #ifdef CONFIG_HOTPLUG_CPU
 	/* cpufreq holds the hotplug lock, so we are safe from here on */
-	cpus_and(online_policy_cpus, cpu_online_map, policy->cpus);
+	cpus_and(*online_policy_cpus, cpu_online_map, policy->cpus);
 #else
-	online_policy_cpus = policy->cpus;
+	*online_policy_cpus = policy->cpus;
 #endif
 
-	saved_mask = current->cpus_allowed;
+	*saved_mask = current->cpus_allowed;
 	first_cpu = 1;
-	cpus_clear(covered_cpus);
-	for_each_cpu_mask(j, online_policy_cpus) {
+	cpus_clear(*covered_cpus);
+	for_each_cpu_mask_nr(j, *online_policy_cpus) {
 		/*
 		 * Support for SMP systems.
 		 * Make sure we are running on CPU that wants to change freq
 		 */
-		cpus_clear(set_mask);
+		cpus_clear(*set_mask);
 		if (policy->shared_type == CPUFREQ_SHARED_TYPE_ANY)
-			cpus_or(set_mask, set_mask, online_policy_cpus);
+			cpus_or(*set_mask, *set_mask, *online_policy_cpus);
 		else
-			cpu_set(j, set_mask);
+			cpu_set(j, *set_mask);
 
-		set_cpus_allowed_ptr(current, &set_mask);
+		set_cpus_allowed_ptr(current, set_mask);
 		preempt_disable();
-		if (unlikely(!cpu_isset(smp_processor_id(), set_mask))) {
+		if (unlikely(!cpu_isset(smp_processor_id(), *set_mask))) {
 			dprintk("couldn't limit to CPUs in this domain\n");
 			retval = -EAGAIN;
 			if (first_cpu) {
@@ -500,7 +531,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 			break;
 		}
 
-		msr = centrino_model[cpu]->op_points[newstate].index;
+		msr = per_cpu(centrino_model, cpu)->op_points[newstate].index;
 
 		if (first_cpu) {
 			rdmsr(MSR_IA32_PERF_CTL, oldmsr, h);
@@ -517,7 +548,7 @@ static int centrino_target (struct cpufreq_policy *policy,
 			dprintk("target=%dkHz old=%d new=%d msr=%04x\n",
 				target_freq, freqs.old, freqs.new, msr);
 
-			for_each_cpu_mask(k, online_policy_cpus) {
+			for_each_cpu_mask_nr(k, *online_policy_cpus) {
 				freqs.cpu = k;
 				cpufreq_notify_transition(&freqs,
 					CPUFREQ_PRECHANGE);
@@ -536,11 +567,11 @@ static int centrino_target (struct cpufreq_policy *policy,
 			break;
 		}
 
-		cpu_set(j, covered_cpus);
+		cpu_set(j, *covered_cpus);
 		preempt_enable();
 	}
 
-	for_each_cpu_mask(k, online_policy_cpus) {
+	for_each_cpu_mask_nr(k, *online_policy_cpus) {
 		freqs.cpu = k;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
@@ -553,30 +584,32 @@ static int centrino_target (struct cpufreq_policy *policy,
 		 * Best effort undo..
 		 */
 
-		if (!cpus_empty(covered_cpus)) {
-			for_each_cpu_mask(j, covered_cpus) {
+		if (!cpus_empty(*covered_cpus))
+			for_each_cpu_mask_nr(j, *covered_cpus) {
 				set_cpus_allowed_ptr(current,
 						     &cpumask_of_cpu(j));
 				wrmsr(MSR_IA32_PERF_CTL, oldmsr, h);
 			}
-		}
 
 		tmp = freqs.new;
 		freqs.new = freqs.old;
 		freqs.old = tmp;
-		for_each_cpu_mask(j, online_policy_cpus) {
+		for_each_cpu_mask_nr(j, *online_policy_cpus) {
 			freqs.cpu = j;
 			cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 			cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 		}
 	}
-	set_cpus_allowed_ptr(current, &saved_mask);
-	return 0;
+	set_cpus_allowed_ptr(current, saved_mask);
+	retval = 0;
+	goto out;
 
 migrate_end:
 	preempt_enable();
-	set_cpus_allowed_ptr(current, &saved_mask);
-	return 0;
+	set_cpus_allowed_ptr(current, saved_mask);
+out:
+	CPUMASK_FREE(allmasks);
+	return retval;
 }
 
 static struct freq_attr* centrino_attr[] = {
diff --git a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
index 1b50244b1fdf..191f7263c61d 100644
--- a/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
+++ b/arch/x86/kernel/cpu/cpufreq/speedstep-ich.c
@@ -279,7 +279,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
 
 	cpus_allowed = current->cpus_allowed;
 
-	for_each_cpu_mask(i, policy->cpus) {
+	for_each_cpu_mask_nr(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 	}
@@ -292,7 +292,7 @@ static int speedstep_target (struct cpufreq_policy *policy,
 	/* allow to be run on all CPUs */
 	set_cpus_allowed_ptr(current, &cpus_allowed);
 
-	for_each_cpu_mask(i, policy->cpus) {
+	for_each_cpu_mask_nr(i, policy->cpus) {
 		freqs.cpu = i;
 		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 	}
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 70609efdf1da..b75f2569b8f8 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -227,6 +227,16 @@ static void __cpuinit init_intel(struct cpuinfo_x86 *c)
 	if (cpu_has_bts)
 		ds_init_intel(c);
 
+	/*
+	 * See if we have a good local APIC by checking for buggy Pentia,
+	 * i.e. all B steppings and the C2 stepping of P54C when using their
+	 * integrated APIC (see 11AP erratum in "Pentium Processor
+	 * Specification Update").
+	 */
+	if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 &&
+	    (c->x86_mask < 0x6 || c->x86_mask == 0xb))
+		set_cpu_cap(c, X86_FEATURE_11AP);
+
 #ifdef CONFIG_X86_NUMAQ
 	numaq_tsc_disable();
 #endif
diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c
index 2c8afafa18e8..6b0a10b002f1 100644
--- a/arch/x86/kernel/cpu/intel_cacheinfo.c
+++ b/arch/x86/kernel/cpu/intel_cacheinfo.c
@@ -489,7 +489,7 @@ static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index)
 	int sibling;
 
 	this_leaf = CPUID4_INFO_IDX(cpu, index);
-	for_each_cpu_mask(sibling, this_leaf->shared_cpu_map) {
+	for_each_cpu_mask_nr(sibling, this_leaf->shared_cpu_map) {
 		sibling_leaf = CPUID4_INFO_IDX(sibling, index);	
 		cpu_clear(cpu, sibling_leaf->shared_cpu_map);
 	}
@@ -780,15 +780,14 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev)
 			}
 			kobject_put(per_cpu(cache_kobject, cpu));
 			cpuid4_cache_sysfs_exit(cpu);
-			break;
+			return retval;
 		}
 		kobject_uevent(&(this_object->kobj), KOBJ_ADD);
 	}
-	if (!retval)
-		cpu_set(cpu, cache_dev_map);
+	cpu_set(cpu, cache_dev_map);
 
 	kobject_uevent(per_cpu(cache_kobject, cpu), KOBJ_ADD);
-	return retval;
+	return 0;
 }
 
 static void __cpuinit cache_remove_dev(struct sys_device * sys_dev)
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index 987410745182..65a339678ece 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -364,7 +364,7 @@ static void mcheck_check_cpu(void *info)
 
 static void mcheck_timer(struct work_struct *work)
 {
-	on_each_cpu(mcheck_check_cpu, NULL, 1, 1);
+	on_each_cpu(mcheck_check_cpu, NULL, 1);
 
 	/*
 	 * Alert userspace if needed.  If we logged an MCE, reduce the
@@ -580,7 +580,7 @@ static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
 	char __user *buf = ubuf;
 	int i, err;
 
-	cpu_tsc = kmalloc(NR_CPUS * sizeof(long), GFP_KERNEL);
+	cpu_tsc = kmalloc(nr_cpu_ids * sizeof(long), GFP_KERNEL);
 	if (!cpu_tsc)
 		return -ENOMEM;
 
@@ -621,7 +621,7 @@ static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize,
 	 * Collect entries that were still getting written before the
 	 * synchronize.
 	 */
-	on_each_cpu(collect_tscs, cpu_tsc, 1, 1);
+	on_each_cpu(collect_tscs, cpu_tsc, 1);
 	for (i = next; i < MCE_LOG_LEN; i++) {
 		if (mcelog.entry[i].finished &&
 		    mcelog.entry[i].tsc < cpu_tsc[mcelog.entry[i].cpu]) {
@@ -746,7 +746,7 @@ static void mce_restart(void)
 	if (next_interval)
 		cancel_delayed_work(&mcheck_work);
 	/* Timer race is harmless here */
-	on_each_cpu(mce_init, NULL, 1, 1);
+	on_each_cpu(mce_init, NULL, 1);
 	next_interval = check_interval * HZ;
 	if (next_interval)
 		schedule_delayed_work(&mcheck_work,
@@ -762,10 +762,14 @@ DEFINE_PER_CPU(struct sys_device, device_mce);
 
 /* Why are there no generic functions for this? */
 #define ACCESSOR(name, var, start) \
-	static ssize_t show_ ## name(struct sys_device *s, char *buf) {	\
+	static ssize_t show_ ## name(struct sys_device *s,		\
+				     struct sysdev_attribute *attr,	\
+				     char *buf) {			\
 		return sprintf(buf, "%lx\n", (unsigned long)var);	\
 	}								\
-	static ssize_t set_ ## name(struct sys_device *s,const char *buf,size_t siz) { \
+	static ssize_t set_ ## name(struct sys_device *s,		\
+				    struct sysdev_attribute *attr,	\
+				    const char *buf, size_t siz) {	\
 		char *end;						\
 		unsigned long new = simple_strtoul(buf, &end, 0);	\
 		if (end == buf) return -EINVAL;				\
@@ -786,14 +790,16 @@ ACCESSOR(bank3ctl,bank[3],mce_restart())
 ACCESSOR(bank4ctl,bank[4],mce_restart())
 ACCESSOR(bank5ctl,bank[5],mce_restart())
 
-static ssize_t show_trigger(struct sys_device *s, char *buf)
+static ssize_t show_trigger(struct sys_device *s, struct sysdev_attribute *attr,
+				char *buf)
 {
 	strcpy(buf, trigger);
 	strcat(buf, "\n");
 	return strlen(trigger) + 1;
 }
 
-static ssize_t set_trigger(struct sys_device *s,const char *buf,size_t siz)
+static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
+				const char *buf,size_t siz)
 {
 	char *p;
 	int len;
@@ -806,12 +812,12 @@ static ssize_t set_trigger(struct sys_device *s,const char *buf,size_t siz)
 }
 
 static SYSDEV_ATTR(trigger, 0644, show_trigger, set_trigger);
-ACCESSOR(tolerant,tolerant,)
+static SYSDEV_INT_ATTR(tolerant, 0644, tolerant);
 ACCESSOR(check_interval,check_interval,mce_restart())
 static struct sysdev_attribute *mce_attributes[] = {
 	&attr_bank0ctl, &attr_bank1ctl, &attr_bank2ctl,
 	&attr_bank3ctl, &attr_bank4ctl, &attr_bank5ctl,
-	&attr_tolerant, &attr_check_interval, &attr_trigger,
+	&attr_tolerant.attr, &attr_check_interval, &attr_trigger,
 	NULL
 };
 
diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
index 7c9a813e1193..88736cadbaa6 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c
@@ -527,7 +527,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank)
 	if (err)
 		goto out_free;
 
-	for_each_cpu_mask(i, b->cpus) {
+	for_each_cpu_mask_nr(i, b->cpus) {
 		if (i == cpu)
 			continue;
 
@@ -617,7 +617,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank)
 #endif
 
 	/* remove all sibling symlinks before unregistering */
-	for_each_cpu_mask(i, b->cpus) {
+	for_each_cpu_mask_nr(i, b->cpus) {
 		if (i == cpu)
 			continue;
 
diff --git a/arch/x86/kernel/cpu/mcheck/non-fatal.c b/arch/x86/kernel/cpu/mcheck/non-fatal.c
index 00ccb6c14ec2..cc1fccdd31e0 100644
--- a/arch/x86/kernel/cpu/mcheck/non-fatal.c
+++ b/arch/x86/kernel/cpu/mcheck/non-fatal.c
@@ -59,7 +59,7 @@ static DECLARE_DELAYED_WORK(mce_work, mce_work_fn);
 
 static void mce_work_fn(struct work_struct *work)
 {
-	on_each_cpu(mce_checkregs, NULL, 1, 1);
+	on_each_cpu(mce_checkregs, NULL, 1);
 	schedule_delayed_work(&mce_work, round_jiffies_relative(MCE_RATE));
 }
 
diff --git a/arch/x86/kernel/cpu/mcheck/p4.c b/arch/x86/kernel/cpu/mcheck/p4.c
index eef001ad3bde..9b60fce09f75 100644
--- a/arch/x86/kernel/cpu/mcheck/p4.c
+++ b/arch/x86/kernel/cpu/mcheck/p4.c
@@ -102,7 +102,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c)
 	/* The temperature transition interrupt handler setup */
 	h = THERMAL_APIC_VECTOR;		/* our delivery vector */
 	h |= (APIC_DM_FIXED | APIC_LVT_MASKED);	/* we'll mask till we're ready */
-	apic_write_around(APIC_LVTTHMR, h);
+	apic_write(APIC_LVTTHMR, h);
 
 	rdmsr(MSR_IA32_THERM_INTERRUPT, l, h);
 	wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03 , h);
@@ -114,7 +114,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c)
 	wrmsr(MSR_IA32_MISC_ENABLE, l | (1<<3), h);
 
 	l = apic_read(APIC_LVTTHMR);
-	apic_write_around(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
+	apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED);
 	printk(KERN_INFO "CPU%d: Thermal monitoring enabled\n", cpu);
 
 	/* enable thermal throttle processing */
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 1f4cc48c14c6..d5ae2243f0b9 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -35,6 +35,7 @@ atomic_t therm_throt_en = ATOMIC_INIT(0);
 
 #define define_therm_throt_sysdev_show_func(name)                            \
 static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev,        \
+					struct sysdev_attribute *attr,	     \
                                               char *buf)                     \
 {                                                                            \
 	unsigned int cpu = dev->id;                                          \
diff --git a/arch/x86/kernel/cpu/mtrr/main.c b/arch/x86/kernel/cpu/mtrr/main.c
index 105afe12beb0..6f23969c8faf 100644
--- a/arch/x86/kernel/cpu/mtrr/main.c
+++ b/arch/x86/kernel/cpu/mtrr/main.c
@@ -223,7 +223,7 @@ static void set_mtrr(unsigned int reg, unsigned long base,
 	atomic_set(&data.gate,0);
 
 	/*  Start the ball rolling on other CPUs  */
-	if (smp_call_function(ipi_handler, &data, 1, 0) != 0)
+	if (smp_call_function(ipi_handler, &data, 0) != 0)
 		panic("mtrr: timed out waiting for other CPUs\n");
 
 	local_irq_save(flags);
@@ -1682,7 +1682,7 @@ void mtrr_ap_init(void)
  */
 void mtrr_save_state(void)
 {
-	smp_call_function_single(0, mtrr_save_fixed_ranges, NULL, 1, 1);
+	smp_call_function_single(0, mtrr_save_fixed_ranges, NULL, 1);
 }
 
 static int __init mtrr_init_finialize(void)
diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c
index 2e9bef6e3aa3..de7439f82b92 100644
--- a/arch/x86/kernel/cpu/perfctr-watchdog.c
+++ b/arch/x86/kernel/cpu/perfctr-watchdog.c
@@ -189,7 +189,7 @@ void disable_lapic_nmi_watchdog(void)
 	if (atomic_read(&nmi_active) <= 0)
 		return;
 
-	on_each_cpu(stop_apic_nmi_watchdog, NULL, 0, 1);
+	on_each_cpu(stop_apic_nmi_watchdog, NULL, 1);
 
 	if (wd_ops)
 		wd_ops->unreserve();
@@ -213,7 +213,7 @@ void enable_lapic_nmi_watchdog(void)
 		return;
 	}
 
-	on_each_cpu(setup_apic_nmi_watchdog, NULL, 0, 1);
+	on_each_cpu(setup_apic_nmi_watchdog, NULL, 1);
 	touch_nmi_watchdog();
 }
 
@@ -250,7 +250,7 @@ static void write_watchdog_counter(unsigned int perfctr_msr,
 
 	do_div(count, nmi_hz);
 	if(descr)
-		Dprintk("setting %s to -0x%08Lx\n", descr, count);
+		pr_debug("setting %s to -0x%08Lx\n", descr, count);
 	wrmsrl(perfctr_msr, 0 - count);
 }
 
@@ -261,7 +261,7 @@ static void write_watchdog_counter32(unsigned int perfctr_msr,
 
 	do_div(count, nmi_hz);
 	if(descr)
-		Dprintk("setting %s to -0x%08Lx\n", descr, count);
+		pr_debug("setting %s to -0x%08Lx\n", descr, count);
 	wrmsr(perfctr_msr, (u32)(-count), 0);
 }
 
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index 0d0d9057e7c0..a26c480b9491 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -160,7 +160,7 @@ static void *c_start(struct seq_file *m, loff_t *pos)
 {
 	if (*pos == 0)	/* just in case, cpu 0 is not the first */
 		*pos = first_cpu(cpu_online_map);
-	if ((*pos) < NR_CPUS && cpu_online(*pos))
+	if ((*pos) < nr_cpu_ids && cpu_online(*pos))
 		return &cpu_data(*pos);
 	return NULL;
 }
diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c
index 71f1c2654bec..14b11b3be31c 100644
--- a/arch/x86/kernel/cpuid.c
+++ b/arch/x86/kernel/cpuid.c
@@ -96,7 +96,7 @@ static ssize_t cpuid_read(struct file *file, char __user *buf,
 	for (; count; count -= 16) {
 		cmd.eax = pos;
 		cmd.ecx = pos >> 32;
-		smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1, 1);
+		smp_call_function_single(cpu, cpuid_smp_cpuid, &cmd, 1);
 		if (copy_to_user(tmp, &cmd, 16))
 			return -EFAULT;
 		tmp += 16;
@@ -141,8 +141,8 @@ static __cpuinit int cpuid_device_create(int cpu)
 {
 	struct device *dev;
 
-	dev = device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, cpu),
-			    "cpu%d", cpu);
+	dev = device_create_drvdata(cpuid_class, NULL, MKDEV(CPUID_MAJOR, cpu),
+				    NULL, "cpu%d", cpu);
 	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
 
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 28c29180b380..9af89078f7bb 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -877,7 +877,8 @@ void __init early_res_to_bootmem(u64 start, u64 end)
 	for (i = 0; i < MAX_EARLY_RES && early_res[i].end; i++)
 		count++;
 
-	printk(KERN_INFO "(%d early reservations) ==> bootmem\n", count);
+	printk(KERN_INFO "(%d early reservations) ==> bootmem [%010llx - %010llx]\n",
+			 count, start, end);
 	for (i = 0; i < count; i++) {
 		struct early_res *r = &early_res[i];
 		printk(KERN_INFO "  #%d [%010llx - %010llx] %16s", i,
@@ -1298,11 +1299,6 @@ void __init e820_reserve_resources(void)
 	}
 }
 
-/*
- * Non-standard memory setup can be specified via this quirk:
- */
-char * (*arch_memory_setup_quirk)(void);
-
 char *__init default_machine_specific_memory_setup(void)
 {
 	char *who = "BIOS-e820";
@@ -1343,8 +1339,8 @@ char *__init default_machine_specific_memory_setup(void)
 
 char *__init __attribute__((weak)) machine_specific_memory_setup(void)
 {
-	if (arch_memory_setup_quirk) {
-		char *who = arch_memory_setup_quirk();
+	if (x86_quirks->arch_memory_setup) {
+		char *who = x86_quirks->arch_memory_setup();
 
 		if (who)
 			return who;
@@ -1367,24 +1363,3 @@ void __init setup_memory_map(void)
 	printk(KERN_INFO "BIOS-provided physical RAM map:\n");
 	e820_print_map(who);
 }
-
-#ifdef CONFIG_X86_64
-int __init arch_get_ram_range(int slot, u64 *addr, u64 *size)
-{
-	int i;
-
-	if (slot < 0 || slot >= e820.nr_map)
-		return -1;
-	for (i = slot; i < e820.nr_map; i++) {
-		if (e820.map[i].type != E820_RAM)
-			continue;
-		break;
-	}
-	if (i == e820.nr_map || e820.map[i].addr > (max_pfn << PAGE_SHIFT))
-		return -1;
-	*addr = e820.map[i].addr;
-	*size = min_t(u64, e820.map[i].size + e820.map[i].addr,
-		max_pfn << PAGE_SHIFT) - *addr;
-	return i + 1;
-}
-#endif
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index a4665f37cfc5..4353cf5e6fac 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -16,10 +16,7 @@
 #include <asm/dma.h>
 #include <asm/io_apic.h>
 #include <asm/apic.h>
-
-#ifdef CONFIG_GART_IOMMU
-#include <asm/gart.h>
-#endif
+#include <asm/iommu.h>
 
 static void __init fix_hypertransport_config(int num, int slot, int func)
 {
@@ -120,7 +117,18 @@ static struct chipset early_qrk[] __initdata = {
 	{}
 };
 
-static void __init check_dev_quirk(int num, int slot, int func)
+/**
+ * check_dev_quirk - apply early quirks to a given PCI device
+ * @num: bus number
+ * @slot: slot number
+ * @func: PCI function
+ *
+ * Check the vendor & device ID against the early quirks table.
+ *
+ * If the device is single function, let early_quirks() know so we don't
+ * poke at this device again.
+ */
+static int __init check_dev_quirk(int num, int slot, int func)
 {
 	u16 class;
 	u16 vendor;
@@ -131,7 +139,7 @@ static void __init check_dev_quirk(int num, int slot, int func)
 	class = read_pci_config_16(num, slot, func, PCI_CLASS_DEVICE);
 
 	if (class == 0xffff)
-		return;
+		return -1; /* no class, treat as single function */
 
 	vendor = read_pci_config_16(num, slot, func, PCI_VENDOR_ID);
 
@@ -154,7 +162,9 @@ static void __init check_dev_quirk(int num, int slot, int func)
 	type = read_pci_config_byte(num, slot, func,
 				    PCI_HEADER_TYPE);
 	if (!(type & 0x80))
-		return;
+		return -1;
+
+	return 0;
 }
 
 void __init early_quirks(void)
@@ -167,6 +177,9 @@ void __init early_quirks(void)
 	/* Poor man's PCI discovery */
 	for (num = 0; num < 32; num++)
 		for (slot = 0; slot < 32; slot++)
-			for (func = 0; func < 8; func++)
-				check_dev_quirk(num, slot, func);
+			for (func = 0; func < 8; func++) {
+				/* Only probe function 0 on single fn devices */
+				if (check_dev_quirk(num, slot, func))
+					break;
+			}
 }
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 6bc07f0f1202..109792bc7cfa 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -54,6 +54,16 @@
 #include <asm/ftrace.h>
 #include <asm/irq_vectors.h>
 
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_I386		(EM_386|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_LE	   0x40000000
+
+#ifndef CONFIG_AUDITSYSCALL
+#define sysenter_audit	syscall_trace_entry
+#define sysexit_audit	syscall_exit_work
+#endif
+
 /*
  * We use macros for low-level operations which need to be overridden
  * for paravirtualization.  The following will never clobber any registers:
@@ -332,8 +342,9 @@ sysenter_past_esp:
 	GET_THREAD_INFO(%ebp)
 
 	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
-	testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
-	jnz syscall_trace_entry
+	testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
+	jnz sysenter_audit
+sysenter_do_call:
 	cmpl $(nr_syscalls), %eax
 	jae syscall_badsys
 	call *sys_call_table(,%eax,4)
@@ -343,7 +354,8 @@ sysenter_past_esp:
 	TRACE_IRQS_OFF
 	movl TI_flags(%ebp), %ecx
 	testw $_TIF_ALLWORK_MASK, %cx
-	jne syscall_exit_work
+	jne sysexit_audit
+sysenter_exit:
 /* if something modifies registers it must also disable sysexit */
 	movl PT_EIP(%esp), %edx
 	movl PT_OLDESP(%esp), %ecx
@@ -351,6 +363,45 @@ sysenter_past_esp:
 	TRACE_IRQS_ON
 1:	mov  PT_FS(%esp), %fs
 	ENABLE_INTERRUPTS_SYSEXIT
+
+#ifdef CONFIG_AUDITSYSCALL
+sysenter_audit:
+	testw $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+	jnz syscall_trace_entry
+	addl $4,%esp
+	CFI_ADJUST_CFA_OFFSET -4
+	/* %esi already in 8(%esp)	   6th arg: 4th syscall arg */
+	/* %edx already in 4(%esp)	   5th arg: 3rd syscall arg */
+	/* %ecx already in 0(%esp)	   4th arg: 2nd syscall arg */
+	movl %ebx,%ecx			/* 3rd arg: 1st syscall arg */
+	movl %eax,%edx			/* 2nd arg: syscall number */
+	movl $AUDIT_ARCH_I386,%eax	/* 1st arg: audit arch */
+	call audit_syscall_entry
+	pushl %ebx
+	CFI_ADJUST_CFA_OFFSET 4
+	movl PT_EAX(%esp),%eax		/* reload syscall number */
+	jmp sysenter_do_call
+
+sysexit_audit:
+	testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx
+	jne syscall_exit_work
+	TRACE_IRQS_ON
+	ENABLE_INTERRUPTS(CLBR_ANY)
+	movl %eax,%edx		/* second arg, syscall return value */
+	cmpl $0,%eax		/* is it < 0? */
+	setl %al		/* 1 if so, 0 if not */
+	movzbl %al,%eax		/* zero-extend that */
+	inc %eax /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
+	call audit_syscall_exit
+	DISABLE_INTERRUPTS(CLBR_ANY)
+	TRACE_IRQS_OFF
+	movl TI_flags(%ebp), %ecx
+	testw $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT), %cx
+	jne syscall_exit_work
+	movl PT_EAX(%esp),%eax	/* reload syscall return value */
+	jmp sysenter_exit
+#endif
+
 	CFI_ENDPROC
 .pushsection .fixup,"ax"
 2:	movl $0,PT_FS(%esp)
@@ -370,7 +421,7 @@ ENTRY(system_call)
 	GET_THREAD_INFO(%ebp)
 					# system call tracing in operation / emulation
 	/* Note, _TIF_SECCOMP is bit number 8, and so it needs testw and not testb */
-	testw $(_TIF_SYSCALL_EMU|_TIF_SYSCALL_TRACE|_TIF_SECCOMP|_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
+	testw $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%ebp)
 	jnz syscall_trace_entry
 	cmpl $(nr_syscalls), %eax
 	jae syscall_badsys
@@ -383,10 +434,6 @@ syscall_exit:
 					# setting need_resched or sigpending
 					# between sampling and the iret
 	TRACE_IRQS_OFF
-	testl $X86_EFLAGS_TF,PT_EFLAGS(%esp)	# If tracing set singlestep flag on exit
-	jz no_singlestep
-	orl $_TIF_SINGLESTEP,TI_flags(%ebp)
-no_singlestep:
 	movl TI_flags(%ebp), %ecx
 	testw $_TIF_ALLWORK_MASK, %cx	# current->work
 	jne syscall_exit_work
@@ -514,12 +561,8 @@ END(work_pending)
 syscall_trace_entry:
 	movl $-ENOSYS,PT_EAX(%esp)
 	movl %esp, %eax
-	xorl %edx,%edx
-	call do_syscall_trace
-	cmpl $0, %eax
-	jne resume_userspace		# ret != 0 -> running under PTRACE_SYSEMU,
-					# so must skip actual syscall
-	movl PT_ORIG_EAX(%esp), %eax
+	call syscall_trace_enter
+	/* What it returned is what we'll actually use.  */
 	cmpl $(nr_syscalls), %eax
 	jnae syscall_call
 	jmp syscall_exit
@@ -528,14 +571,13 @@ END(syscall_trace_entry)
 	# perform syscall exit tracing
 	ALIGN
 syscall_exit_work:
-	testb $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP), %cl
+	testb $_TIF_WORK_SYSCALL_EXIT, %cl
 	jz work_pending
 	TRACE_IRQS_ON
-	ENABLE_INTERRUPTS(CLBR_ANY)	# could let do_syscall_trace() call
+	ENABLE_INTERRUPTS(CLBR_ANY)	# could let syscall_trace_leave() call
 					# schedule() instead
 	movl %esp, %eax
-	movl $1, %edx
-	call do_syscall_trace
+	call syscall_trace_leave
 	jmp resume_userspace
 END(syscall_exit_work)
 	CFI_ENDPROC
@@ -1024,6 +1066,7 @@ ENDPROC(kernel_thread_helper)
 ENTRY(xen_sysenter_target)
 	RING0_INT_FRAME
 	addl $5*4, %esp		/* remove xen-provided frame */
+	CFI_ADJUST_CFA_OFFSET -5*4
 	jmp sysenter_past_esp
 	CFI_ENDPROC
 
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index ba41bf42748d..89434d439605 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -53,6 +53,12 @@
 #include <asm/paravirt.h>
 #include <asm/ftrace.h>
 
+/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this.  */
+#include <linux/elf-em.h>
+#define AUDIT_ARCH_X86_64	(EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
+#define __AUDIT_ARCH_64BIT 0x80000000
+#define __AUDIT_ARCH_LE	   0x40000000
+
 	.code64
 
 #ifdef CONFIG_FTRACE
@@ -349,9 +355,9 @@ ENTRY(system_call_after_swapgs)
 	movq  %rcx,RIP-ARGOFFSET(%rsp)
 	CFI_REL_OFFSET rip,RIP-ARGOFFSET
 	GET_THREAD_INFO(%rcx)
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
-		TI_flags(%rcx)
+	testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%rcx)
 	jnz tracesys
+system_call_fastpath:
 	cmpq $__NR_syscall_max,%rax
 	ja badsys
 	movq %r10,%rcx
@@ -403,16 +409,16 @@ sysret_careful:
 sysret_signal:
 	TRACE_IRQS_ON
 	ENABLE_INTERRUPTS(CLBR_NONE)
-	testl $_TIF_DO_NOTIFY_MASK,%edx
-	jz    1f
-
-	/* Really a signal */
+#ifdef CONFIG_AUDITSYSCALL
+	bt $TIF_SYSCALL_AUDIT,%edx
+	jc sysret_audit
+#endif
 	/* edx:	work flags (arg3) */
 	leaq do_notify_resume(%rip),%rax
 	leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
 	xorl %esi,%esi # oldset -> arg2
 	call ptregscall_common
-1:	movl $_TIF_WORK_MASK,%edi
+	movl $_TIF_WORK_MASK,%edi
 	/* Use IRET because user could have changed frame. This
 	   works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
 	DISABLE_INTERRUPTS(CLBR_NONE)
@@ -423,14 +429,56 @@ badsys:
 	movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
 	jmp ret_from_sys_call
 
+#ifdef CONFIG_AUDITSYSCALL
+	/*
+	 * Fast path for syscall audit without full syscall trace.
+	 * We just call audit_syscall_entry() directly, and then
+	 * jump back to the normal fast path.
+	 */
+auditsys:
+	movq %r10,%r9			/* 6th arg: 4th syscall arg */
+	movq %rdx,%r8			/* 5th arg: 3rd syscall arg */
+	movq %rsi,%rcx			/* 4th arg: 2nd syscall arg */
+	movq %rdi,%rdx			/* 3rd arg: 1st syscall arg */
+	movq %rax,%rsi			/* 2nd arg: syscall number */
+	movl $AUDIT_ARCH_X86_64,%edi	/* 1st arg: audit arch */
+	call audit_syscall_entry
+	LOAD_ARGS 0		/* reload call-clobbered registers */
+	jmp system_call_fastpath
+
+	/*
+	 * Return fast path for syscall audit.  Call audit_syscall_exit()
+	 * directly and then jump back to the fast path with TIF_SYSCALL_AUDIT
+	 * masked off.
+	 */
+sysret_audit:
+	movq %rax,%rsi		/* second arg, syscall return value */
+	cmpq $0,%rax		/* is it < 0? */
+	setl %al		/* 1 if so, 0 if not */
+	movzbl %al,%edi		/* zero-extend that into %edi */
+	inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
+	call audit_syscall_exit
+	movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
+	jmp sysret_check
+#endif	/* CONFIG_AUDITSYSCALL */
+
 	/* Do syscall tracing */
 tracesys:			 
+#ifdef CONFIG_AUDITSYSCALL
+	testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
+	jz auditsys
+#endif
 	SAVE_REST
 	movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
 	FIXUP_TOP_OF_STACK %rdi
 	movq %rsp,%rdi
 	call syscall_trace_enter
-	LOAD_ARGS ARGOFFSET  /* reload args from stack in case ptrace changed it */
+	/*
+	 * Reload arg registers from stack in case ptrace changed them.
+	 * We don't reload %rax because syscall_trace_enter() returned
+	 * the value it wants us to use in the table lookup.
+	 */
+	LOAD_ARGS ARGOFFSET, 1
 	RESTORE_REST
 	cmpq $__NR_syscall_max,%rax
 	ja   int_ret_from_sys_call	/* RAX(%rsp) set to -ENOSYS above */
@@ -444,6 +492,7 @@ tracesys:
  * Has correct top of stack, but partial stack frame.
  */
 	.globl int_ret_from_sys_call
+	.globl int_with_check
 int_ret_from_sys_call:
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
@@ -483,7 +532,7 @@ int_very_careful:
 	ENABLE_INTERRUPTS(CLBR_NONE)
 	SAVE_REST
 	/* Check for syscall exit trace */	
-	testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx
+	testl $_TIF_WORK_SYSCALL_EXIT,%edx
 	jz int_signal
 	pushq %rdi
 	CFI_ADJUST_CFA_OFFSET 8
@@ -491,7 +540,7 @@ int_very_careful:
 	call syscall_trace_leave
 	popq %rdi
 	CFI_ADJUST_CFA_OFFSET -8
-	andl $~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edi
+	andl $~(_TIF_WORK_SYSCALL_EXIT|_TIF_SYSCALL_EMU),%edi
 	jmp int_restore_rest
 	
 int_signal:
@@ -816,6 +865,9 @@ END(invalidate_interrupt\num)
 ENTRY(call_function_interrupt)
 	apicinterrupt CALL_FUNCTION_VECTOR,smp_call_function_interrupt
 END(call_function_interrupt)
+ENTRY(call_function_single_interrupt)
+	apicinterrupt CALL_FUNCTION_SINGLE_VECTOR,smp_call_function_single_interrupt
+END(call_function_single_interrupt)
 ENTRY(irq_move_cleanup_interrupt)
 	apicinterrupt IRQ_MOVE_CLEANUP_VECTOR,smp_irq_move_cleanup_interrupt
 END(irq_move_cleanup_interrupt)
@@ -1186,6 +1238,7 @@ END(device_not_available)
 	/* runs on exception stack */
 KPROBE_ENTRY(debug)
  	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq $0
 	CFI_ADJUST_CFA_OFFSET 8		
 	paranoidentry do_debug, DEBUG_STACK
@@ -1195,6 +1248,7 @@ KPROBE_END(debug)
 	/* runs on exception stack */	
 KPROBE_ENTRY(nmi)
 	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq $-1
 	CFI_ADJUST_CFA_OFFSET 8
 	paranoidentry do_nmi, 0, 0
@@ -1208,6 +1262,7 @@ KPROBE_END(nmi)
 
 KPROBE_ENTRY(int3)
  	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
  	pushq $0
  	CFI_ADJUST_CFA_OFFSET 8
  	paranoidentry do_int3, DEBUG_STACK
@@ -1234,6 +1289,7 @@ END(coprocessor_segment_overrun)
 	/* runs on exception stack */
 ENTRY(double_fault)
 	XCPT_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	paranoidentry do_double_fault
 	jmp paranoid_exit1
 	CFI_ENDPROC
@@ -1250,6 +1306,7 @@ END(segment_not_present)
 	/* runs on exception stack */
 ENTRY(stack_segment)
 	XCPT_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	paranoidentry do_stack_segment
 	jmp paranoid_exit1
 	CFI_ENDPROC
@@ -1275,6 +1332,7 @@ END(spurious_interrupt_bug)
 	/* runs on exception stack */
 ENTRY(machine_check)
 	INTR_FRAME
+	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq $0
 	CFI_ADJUST_CFA_OFFSET 8	
 	paranoidentry do_machine_check
@@ -1309,3 +1367,103 @@ KPROBE_ENTRY(ignore_sysret)
 	sysret
 	CFI_ENDPROC
 ENDPROC(ignore_sysret)
+
+#ifdef CONFIG_XEN
+ENTRY(xen_hypervisor_callback)
+	zeroentry xen_do_hypervisor_callback
+END(xen_hypervisor_callback)
+
+/*
+# A note on the "critical region" in our callback handler.
+# We want to avoid stacking callback handlers due to events occurring
+# during handling of the last event. To do this, we keep events disabled
+# until we've done all processing. HOWEVER, we must enable events before
+# popping the stack frame (can't be done atomically) and so it would still
+# be possible to get enough handler activations to overflow the stack.
+# Although unlikely, bugs of that kind are hard to track down, so we'd
+# like to avoid the possibility.
+# So, on entry to the handler we detect whether we interrupted an
+# existing activation in its critical region -- if so, we pop the current
+# activation and restart the handler using the previous one.
+*/
+ENTRY(xen_do_hypervisor_callback)   # do_hypervisor_callback(struct *pt_regs)
+	CFI_STARTPROC
+/* Since we don't modify %rdi, evtchn_do_upall(struct *pt_regs) will
+   see the correct pointer to the pt_regs */
+	movq %rdi, %rsp            # we don't return, adjust the stack frame
+	CFI_ENDPROC
+	CFI_DEFAULT_STACK
+11:	incl %gs:pda_irqcount
+	movq %rsp,%rbp
+	CFI_DEF_CFA_REGISTER rbp
+	cmovzq %gs:pda_irqstackptr,%rsp
+	pushq %rbp			# backlink for old unwinder
+	call xen_evtchn_do_upcall
+	popq %rsp
+	CFI_DEF_CFA_REGISTER rsp
+	decl %gs:pda_irqcount
+	jmp  error_exit
+	CFI_ENDPROC
+END(do_hypervisor_callback)
+
+/*
+# Hypervisor uses this for application faults while it executes.
+# We get here for two reasons:
+#  1. Fault while reloading DS, ES, FS or GS
+#  2. Fault while executing IRET
+# Category 1 we do not need to fix up as Xen has already reloaded all segment
+# registers that could be reloaded and zeroed the others.
+# Category 2 we fix up by killing the current process. We cannot use the
+# normal Linux return path in this case because if we use the IRET hypercall
+# to pop the stack frame we end up in an infinite loop of failsafe callbacks.
+# We distinguish between categories by comparing each saved segment register
+# with its current contents: any discrepancy means we in category 1.
+*/
+ENTRY(xen_failsafe_callback)
+	framesz = (RIP-0x30)	/* workaround buggy gas */
+	_frame framesz
+	CFI_REL_OFFSET rcx, 0
+	CFI_REL_OFFSET r11, 8
+	movw %ds,%cx
+	cmpw %cx,0x10(%rsp)
+	CFI_REMEMBER_STATE
+	jne 1f
+	movw %es,%cx
+	cmpw %cx,0x18(%rsp)
+	jne 1f
+	movw %fs,%cx
+	cmpw %cx,0x20(%rsp)
+	jne 1f
+	movw %gs,%cx
+	cmpw %cx,0x28(%rsp)
+	jne 1f
+	/* All segments match their saved values => Category 2 (Bad IRET). */
+	movq (%rsp),%rcx
+	CFI_RESTORE rcx
+	movq 8(%rsp),%r11
+	CFI_RESTORE r11
+	addq $0x30,%rsp
+	CFI_ADJUST_CFA_OFFSET -0x30
+	pushq $0
+	CFI_ADJUST_CFA_OFFSET 8
+	pushq %r11
+	CFI_ADJUST_CFA_OFFSET 8
+	pushq %rcx
+	CFI_ADJUST_CFA_OFFSET 8
+	jmp general_protection
+	CFI_RESTORE_STATE
+1:	/* Segment mismatch => Category 1 (Bad segment). Retry the IRET. */
+	movq (%rsp),%rcx
+	CFI_RESTORE rcx
+	movq 8(%rsp),%r11
+	CFI_RESTORE r11
+	addq $0x30,%rsp
+	CFI_ADJUST_CFA_OFFSET -0x30
+	pushq $0
+	CFI_ADJUST_CFA_OFFSET 8
+	SAVE_ALL
+	jmp error_exit
+	CFI_ENDPROC
+END(xen_failsafe_callback)
+
+#endif /* CONFIG_XEN */
diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c
index 1fa8be5bd217..eaff0bbb1444 100644
--- a/arch/x86/kernel/genapic_64.c
+++ b/arch/x86/kernel/genapic_64.c
@@ -99,3 +99,4 @@ int is_uv_system(void)
 {
 	return uv_system_type != UV_NONE;
 }
+EXPORT_SYMBOL_GPL(is_uv_system);
diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c
index 1a9c68845ee8..786548a62d38 100644
--- a/arch/x86/kernel/genapic_flat_64.c
+++ b/arch/x86/kernel/genapic_flat_64.c
@@ -168,7 +168,7 @@ static unsigned int physflat_cpu_mask_to_apicid(cpumask_t cpumask)
 	 * May as well be the first.
 	 */
 	cpu = first_cpu(cpumask);
-	if ((unsigned)cpu < NR_CPUS)
+	if ((unsigned)cpu < nr_cpu_ids)
 		return per_cpu(x86_cpu_to_apicid, cpu);
 	else
 		return BAD_APICID;
diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c
index 711f11c30b06..2cfcbded888a 100644
--- a/arch/x86/kernel/genx2apic_uv_x.c
+++ b/arch/x86/kernel/genx2apic_uv_x.c
@@ -24,6 +24,7 @@
 #include <asm/pgtable.h>
 #include <asm/uv/uv_mmrs.h>
 #include <asm/uv/uv_hub.h>
+#include <asm/uv/bios.h>
 
 DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
 EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
@@ -40,6 +41,9 @@ EXPORT_SYMBOL_GPL(uv_cpu_to_blade);
 short uv_possible_blades;
 EXPORT_SYMBOL_GPL(uv_possible_blades);
 
+unsigned long sn_rtc_cycles_per_second;
+EXPORT_SYMBOL(sn_rtc_cycles_per_second);
+
 /* Start with all IRQs pointing to boot CPU.  IRQ balancing will shift them. */
 
 static cpumask_t uv_target_cpus(void)
@@ -94,7 +98,7 @@ static void uv_send_IPI_mask(cpumask_t mask, int vector)
 {
 	unsigned int cpu;
 
-	for (cpu = 0; cpu < NR_CPUS; ++cpu)
+	for_each_possible_cpu(cpu)
 		if (cpu_isset(cpu, mask))
 			uv_send_IPI_one(cpu, vector);
 }
@@ -128,7 +132,7 @@ static unsigned int uv_cpu_mask_to_apicid(cpumask_t cpumask)
 	 * May as well be the first.
 	 */
 	cpu = first_cpu(cpumask);
-	if ((unsigned)cpu < NR_CPUS)
+	if ((unsigned)cpu < nr_cpu_ids)
 		return per_cpu(x86_cpu_to_apicid, cpu);
 	else
 		return BAD_APICID;
@@ -272,6 +276,23 @@ static __init void map_mmioh_high(int max_pnode)
 		map_high("MMIOH", mmioh.s.base, shift, map_uc);
 }
 
+static __init void uv_rtc_init(void)
+{
+	long status, ticks_per_sec, drift;
+
+	status =
+	    x86_bios_freq_base(BIOS_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
+					&drift);
+	if (status != 0 || ticks_per_sec < 100000) {
+		printk(KERN_WARNING
+			"unable to determine platform RTC clock frequency, "
+			"guessing.\n");
+		/* BIOS gives wrong value for clock freq. so guess */
+		sn_rtc_cycles_per_second = 1000000000000UL / 30000UL;
+	} else
+		sn_rtc_cycles_per_second = ticks_per_sec;
+}
+
 static __init void uv_system_init(void)
 {
 	union uvh_si_addr_map_config_u m_n_config;
@@ -326,6 +347,8 @@ static __init void uv_system_init(void)
 	gnode_upper = (((unsigned long)node_id.s.node_id) &
 		       ~((1 << n_val) - 1)) << m_val;
 
+	uv_rtc_init();
+
 	for_each_present_cpu(cpu) {
 		nid = cpu_to_node(cpu);
 		pnode = uv_apicid_to_pnode(per_cpu(x86_cpu_to_apicid, cpu));
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index c97819829146..1b318e903bf6 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -39,6 +39,13 @@ static struct x8664_pda *__cpu_pda[NR_CPUS] __initdata;
 static struct x8664_pda *__cpu_pda[NR_CPUS] __read_mostly;
 #endif
 
+void __init x86_64_init_pda(void)
+{
+	_cpu_pda = __cpu_pda;
+	cpu_pda(0) = &_boot_cpu_pda;
+	pda_init(0);
+}
+
 static void __init zap_identity_mappings(void)
 {
 	pgd_t *pgd = pgd_offset_k(0UL);
@@ -102,9 +109,7 @@ void __init x86_64_start_kernel(char * real_mode_data)
 
 	early_printk("Kernel alive\n");
 
-	_cpu_pda = __cpu_pda;
-	cpu_pda(0) = &_boot_cpu_pda;
-	pda_init(0);
+	x86_64_init_pda();
 
 	early_printk("Kernel really alive\n");
 
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index f67e93441caf..a7010c3a377a 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -456,9 +456,6 @@ is386:	movl $2,%ecx		# set MP
 1:
 #endif /* CONFIG_SMP */
 	jmp *(initial_code)
-.align 4
-ENTRY(initial_code)
-	.long i386_start_kernel
 
 /*
  * We depend on ET to be correct. This checks for 287/387.
@@ -601,6 +598,11 @@ ignore_int:
 #endif
 	iret
 
+.section .cpuinit.data,"wa"
+.align 4
+ENTRY(initial_code)
+	.long i386_start_kernel
+
 .section .text
 /*
  * Real beginning of normal "text" segment
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index b07ac7b217cb..db3280afe886 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -407,6 +407,7 @@ ENTRY(phys_base)
 	/* This must match the first entry in level2_kernel_pgt */
 	.quad   0x0000000000000000
 
+#include "../../x86/xen/xen-head.S"
 	
 	.section .bss, "aw", @nobits
 	.align L1_CACHE_BYTES
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index 0ea6a19bfdfe..ad2b15a1334d 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -468,7 +468,7 @@ void hpet_disable(void)
 #define RTC_NUM_INTS		1
 
 static unsigned long hpet_rtc_flags;
-static unsigned long hpet_prev_update_sec;
+static int hpet_prev_update_sec;
 static struct rtc_time hpet_alarm_time;
 static unsigned long hpet_pie_count;
 static unsigned long hpet_t1_cmp;
@@ -575,6 +575,9 @@ int hpet_set_rtc_irq_bit(unsigned long bit_mask)
 
 	hpet_rtc_flags |= bit_mask;
 
+	if ((bit_mask & RTC_UIE) && !(oldbits & RTC_UIE))
+		hpet_prev_update_sec = -1;
+
 	if (!oldbits)
 		hpet_rtc_timer_init();
 
@@ -652,7 +655,7 @@ static void hpet_rtc_timer_reinit(void)
 		if (hpet_rtc_flags & RTC_PIE)
 			hpet_pie_count += lost_ints;
 		if (printk_ratelimit())
-			printk(KERN_WARNING "rtc: lost %d interrupts\n",
+			printk(KERN_WARNING "hpet1: lost %d rtc interrupts\n",
 				lost_ints);
 	}
 }
@@ -670,7 +673,8 @@ irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
 
 	if (hpet_rtc_flags & RTC_UIE &&
 	    curr_time.tm_sec != hpet_prev_update_sec) {
-		rtc_int_flag = RTC_UF;
+		if (hpet_prev_update_sec >= 0)
+			rtc_int_flag = RTC_UF;
 		hpet_prev_update_sec = curr_time.tm_sec;
 	}
 
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index 603261a5885c..de9aa0e3a9c5 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -756,7 +756,7 @@ void send_IPI_self(int vector)
 	/*
 	 * Send the IPI. The write to APIC_ICR fires this off.
 	 */
-	apic_write_around(APIC_ICR, cfg);
+	apic_write(APIC_ICR, cfg);
 }
 #endif /* !CONFIG_SMP */
 
@@ -1569,7 +1569,7 @@ void /*__init*/ print_local_APIC(void *dummy)
 
 void print_all_local_APICs(void)
 {
-	on_each_cpu(print_local_APIC, NULL, 1, 1);
+	on_each_cpu(print_local_APIC, NULL, 1);
 }
 
 void /*__init*/ print_PIC(void)
@@ -2030,7 +2030,7 @@ static void mask_lapic_irq(unsigned int irq)
 	unsigned long v;
 
 	v = apic_read(APIC_LVT0);
-	apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED);
+	apic_write(APIC_LVT0, v | APIC_LVT_MASKED);
 }
 
 static void unmask_lapic_irq(unsigned int irq)
@@ -2038,7 +2038,7 @@ static void unmask_lapic_irq(unsigned int irq)
 	unsigned long v;
 
 	v = apic_read(APIC_LVT0);
-	apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED);
+	apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED);
 }
 
 static struct irq_chip lapic_chip __read_mostly = {
@@ -2168,7 +2168,7 @@ static inline void __init check_timer(void)
 	 * The AEOI mode will finish them in the 8259A
 	 * automatically.
 	 */
-	apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
+	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
 	init_8259A(1);
 	timer_ack = (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
 
@@ -2177,8 +2177,9 @@ static inline void __init check_timer(void)
 	pin2  = ioapic_i8259.pin;
 	apic2 = ioapic_i8259.apic;
 
-	printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
-		vector, apic1, pin1, apic2, pin2);
+	apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
+		    "apic1=%d pin1=%d apic2=%d pin2=%d\n",
+		    vector, apic1, pin1, apic2, pin2);
 
 	/*
 	 * Some BIOS writers are clueless and report the ExtINTA
@@ -2216,12 +2217,13 @@ static inline void __init check_timer(void)
 		}
 		clear_IO_APIC_pin(apic1, pin1);
 		if (!no_pin1)
-			printk(KERN_ERR "..MP-BIOS bug: "
-			       "8254 timer not connected to IO-APIC\n");
+			apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
+				    "8254 timer not connected to IO-APIC\n");
 
-		printk(KERN_INFO "...trying to set up timer (IRQ0) "
-		       "through the 8259A ... ");
-		printk("\n..... (found pin %d) ...", pin2);
+		apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
+			    "(IRQ0) through the 8259A ...\n");
+		apic_printk(APIC_QUIET, KERN_INFO
+			    "..... (found apic %d pin %d) ...\n", apic2, pin2);
 		/*
 		 * legacy devices should be connected to IO APIC #0
 		 */
@@ -2230,7 +2232,7 @@ static inline void __init check_timer(void)
 		unmask_IO_APIC_irq(0);
 		enable_8259A_irq(0);
 		if (timer_irq_works()) {
-			printk("works.\n");
+			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
 			timer_through_8259 = 1;
 			if (nmi_watchdog == NMI_IO_APIC) {
 				disable_8259A_irq(0);
@@ -2244,44 +2246,47 @@ static inline void __init check_timer(void)
 		 */
 		disable_8259A_irq(0);
 		clear_IO_APIC_pin(apic2, pin2);
-		printk(" failed.\n");
+		apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
 	}
 
 	if (nmi_watchdog == NMI_IO_APIC) {
-		printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
+		apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
+			    "through the IO-APIC - disabling NMI Watchdog!\n");
 		nmi_watchdog = NMI_NONE;
 	}
 	timer_ack = 0;
 
-	printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
+	apic_printk(APIC_QUIET, KERN_INFO
+		    "...trying to set up timer as Virtual Wire IRQ...\n");
 
 	lapic_register_intr(0, vector);
-	apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector);	/* Fixed mode */
+	apic_write(APIC_LVT0, APIC_DM_FIXED | vector);	/* Fixed mode */
 	enable_8259A_irq(0);
 
 	if (timer_irq_works()) {
-		printk(" works.\n");
+		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
 		goto out;
 	}
 	disable_8259A_irq(0);
-	apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
-	printk(" failed.\n");
+	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector);
+	apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
 
-	printk(KERN_INFO "...trying to set up timer as ExtINT IRQ...");
+	apic_printk(APIC_QUIET, KERN_INFO
+		    "...trying to set up timer as ExtINT IRQ...\n");
 
 	init_8259A(0);
 	make_8259A_irq(0);
-	apic_write_around(APIC_LVT0, APIC_DM_EXTINT);
+	apic_write(APIC_LVT0, APIC_DM_EXTINT);
 
 	unlock_ExtINT_logic();
 
 	if (timer_irq_works()) {
-		printk(" works.\n");
+		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
 		goto out;
 	}
-	printk(" failed :(.\n");
+	apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
 	panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
-		"report.  Then try booting with the 'noapic' option");
+		"report.  Then try booting with the 'noapic' option.\n");
 out:
 	local_irq_restore(flags);
 }
diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c
index b16ef029cf88..8269434d1707 100644
--- a/arch/x86/kernel/io_apic_64.c
+++ b/arch/x86/kernel/io_apic_64.c
@@ -45,6 +45,7 @@
 #include <asm/proto.h>
 #include <asm/acpi.h>
 #include <asm/dma.h>
+#include <asm/i8259.h>
 #include <asm/nmi.h>
 #include <asm/msidef.h>
 #include <asm/hypertransport.h>
@@ -731,7 +732,7 @@ static int __assign_irq_vector(int irq, cpumask_t mask)
 			return 0;
 	}
 
-	for_each_cpu_mask(cpu, mask) {
+	for_each_cpu_mask_nr(cpu, mask) {
 		cpumask_t domain, new_mask;
 		int new_cpu;
 		int vector, offset;
@@ -752,7 +753,7 @@ next:
 			continue;
 		if (vector == IA32_SYSCALL_VECTOR)
 			goto next;
-		for_each_cpu_mask(new_cpu, new_mask)
+		for_each_cpu_mask_nr(new_cpu, new_mask)
 			if (per_cpu(vector_irq, new_cpu)[vector] != -1)
 				goto next;
 		/* Found one! */
@@ -762,7 +763,7 @@ next:
 			cfg->move_in_progress = 1;
 			cfg->old_domain = cfg->domain;
 		}
-		for_each_cpu_mask(new_cpu, new_mask)
+		for_each_cpu_mask_nr(new_cpu, new_mask)
 			per_cpu(vector_irq, new_cpu)[vector] = irq;
 		cfg->vector = vector;
 		cfg->domain = domain;
@@ -794,7 +795,7 @@ static void __clear_irq_vector(int irq)
 
 	vector = cfg->vector;
 	cpus_and(mask, cfg->domain, cpu_online_map);
-	for_each_cpu_mask(cpu, mask)
+	for_each_cpu_mask_nr(cpu, mask)
 		per_cpu(vector_irq, cpu)[vector] = -1;
 
 	cfg->vector = 0;
@@ -1160,7 +1161,7 @@ void __apicdebuginit print_local_APIC(void * dummy)
 
 void print_all_local_APICs (void)
 {
-	on_each_cpu(print_local_APIC, NULL, 1, 1);
+	on_each_cpu(print_local_APIC, NULL, 1);
 }
 
 void __apicdebuginit print_PIC(void)
@@ -1372,12 +1373,10 @@ static unsigned int startup_ioapic_irq(unsigned int irq)
 static int ioapic_retrigger_irq(unsigned int irq)
 {
 	struct irq_cfg *cfg = &irq_cfg[irq];
-	cpumask_t mask;
 	unsigned long flags;
 
 	spin_lock_irqsave(&vector_lock, flags);
-	mask = cpumask_of_cpu(first_cpu(cfg->domain));
-	send_IPI_mask(mask, cfg->vector);
+	send_IPI_mask(cpumask_of_cpu(first_cpu(cfg->domain)), cfg->vector);
 	spin_unlock_irqrestore(&vector_lock, flags);
 
 	return 1;
@@ -1696,8 +1695,9 @@ static inline void __init check_timer(void)
 	pin2  = ioapic_i8259.pin;
 	apic2 = ioapic_i8259.apic;
 
-	apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n",
-		cfg->vector, apic1, pin1, apic2, pin2);
+	apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X "
+		    "apic1=%d pin1=%d apic2=%d pin2=%d\n",
+		    cfg->vector, apic1, pin1, apic2, pin2);
 
 	/*
 	 * Some BIOS writers are clueless and report the ExtINTA
@@ -1735,14 +1735,13 @@ static inline void __init check_timer(void)
 		}
 		clear_IO_APIC_pin(apic1, pin1);
 		if (!no_pin1)
-			apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: "
+			apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: "
 				    "8254 timer not connected to IO-APIC\n");
 
-		apic_printk(APIC_VERBOSE,KERN_INFO
-			"...trying to set up timer (IRQ0) "
-			"through the 8259A ... ");
-		apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...",
-			apic2, pin2);
+		apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer "
+			    "(IRQ0) through the 8259A ...\n");
+		apic_printk(APIC_QUIET, KERN_INFO
+			    "..... (found apic %d pin %d) ...\n", apic2, pin2);
 		/*
 		 * legacy devices should be connected to IO APIC #0
 		 */
@@ -1751,7 +1750,7 @@ static inline void __init check_timer(void)
 		unmask_IO_APIC_irq(0);
 		enable_8259A_irq(0);
 		if (timer_irq_works()) {
-			apic_printk(APIC_VERBOSE," works.\n");
+			apic_printk(APIC_QUIET, KERN_INFO "....... works.\n");
 			timer_through_8259 = 1;
 			if (nmi_watchdog == NMI_IO_APIC) {
 				disable_8259A_irq(0);
@@ -1765,29 +1764,32 @@ static inline void __init check_timer(void)
 		 */
 		disable_8259A_irq(0);
 		clear_IO_APIC_pin(apic2, pin2);
-		apic_printk(APIC_VERBOSE," failed.\n");
+		apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n");
 	}
 
 	if (nmi_watchdog == NMI_IO_APIC) {
-		printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n");
+		apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work "
+			    "through the IO-APIC - disabling NMI Watchdog!\n");
 		nmi_watchdog = NMI_NONE;
 	}
 
-	apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...");
+	apic_printk(APIC_QUIET, KERN_INFO
+		    "...trying to set up timer as Virtual Wire IRQ...\n");
 
 	lapic_register_intr(0);
 	apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector);	/* Fixed mode */
 	enable_8259A_irq(0);
 
 	if (timer_irq_works()) {
-		apic_printk(APIC_VERBOSE," works.\n");
+		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
 		goto out;
 	}
 	disable_8259A_irq(0);
 	apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector);
-	apic_printk(APIC_VERBOSE," failed.\n");
+	apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n");
 
-	apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ...");
+	apic_printk(APIC_QUIET, KERN_INFO
+		    "...trying to set up timer as ExtINT IRQ...\n");
 
 	init_8259A(0);
 	make_8259A_irq(0);
@@ -1796,11 +1798,12 @@ static inline void __init check_timer(void)
 	unlock_ExtINT_logic();
 
 	if (timer_irq_works()) {
-		apic_printk(APIC_VERBOSE," works.\n");
+		apic_printk(APIC_QUIET, KERN_INFO "..... works.\n");
 		goto out;
 	}
-	apic_printk(APIC_VERBOSE," failed :(.\n");
-	panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n");
+	apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n");
+	panic("IO-APIC + timer doesn't work!  Boot with apic=debug and send a "
+		"report.  Then try booting with the 'noapic' option.\n");
 out:
 	local_irq_restore(flags);
 }
diff --git a/arch/x86/kernel/io_delay.c b/arch/x86/kernel/io_delay.c
index 5921e5f0a640..1c3a66a67f83 100644
--- a/arch/x86/kernel/io_delay.c
+++ b/arch/x86/kernel/io_delay.c
@@ -103,6 +103,9 @@ void __init io_delay_init(void)
 
 static int __init io_delay_param(char *s)
 {
+	if (!s)
+		return -EINVAL;
+
 	if (!strcmp(s, "0x80"))
 		io_delay_type = CONFIG_IO_DELAY_TYPE_0X80;
 	else if (!strcmp(s, "0xed"))
diff --git a/arch/x86/kernel/ipi.c b/arch/x86/kernel/ipi.c
index 9d98cda39ad9..3f7537b669d3 100644
--- a/arch/x86/kernel/ipi.c
+++ b/arch/x86/kernel/ipi.c
@@ -70,7 +70,7 @@ void __send_IPI_shortcut(unsigned int shortcut, int vector)
 	/*
 	 * Send the IPI. The write to APIC_ICR fires this off.
 	 */
-	apic_write_around(APIC_ICR, cfg);
+	apic_write(APIC_ICR, cfg);
 }
 
 void send_IPI_self(int vector)
@@ -98,7 +98,7 @@ static inline void __send_IPI_dest_field(unsigned long mask, int vector)
 	 * prepare target chip field
 	 */
 	cfg = __prepare_ICR2(mask);
-	apic_write_around(APIC_ICR2, cfg);
+	apic_write(APIC_ICR2, cfg);
 
 	/*
 	 * program the ICR
@@ -108,7 +108,7 @@ static inline void __send_IPI_dest_field(unsigned long mask, int vector)
 	/*
 	 * Send the IPI. The write to APIC_ICR fires this off.
 	 */
-	apic_write_around(APIC_ICR, cfg);
+	apic_write(APIC_ICR, cfg);
 }
 
 /*
diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c
index 47a6f6f12478..1cf8c1fcc088 100644
--- a/arch/x86/kernel/irq_32.c
+++ b/arch/x86/kernel/irq_32.c
@@ -83,11 +83,8 @@ union irq_ctx {
 static union irq_ctx *hardirq_ctx[NR_CPUS] __read_mostly;
 static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
 
-static char softirq_stack[NR_CPUS * THREAD_SIZE]
-		__attribute__((__section__(".bss.page_aligned")));
-
-static char hardirq_stack[NR_CPUS * THREAD_SIZE]
-		__attribute__((__section__(".bss.page_aligned")));
+static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
+static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
 
 static void call_on_stack(void *func, void *stack)
 {
diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
index 31f49e8f46a7..1f26fd9ec4f4 100644
--- a/arch/x86/kernel/irqinit_64.c
+++ b/arch/x86/kernel/irqinit_64.c
@@ -43,10 +43,11 @@
 
 #define BUILD_IRQ(nr)				\
 	asmlinkage void IRQ_NAME(nr);		\
-	asm("\n.p2align\n"			\
+	asm("\n.text\n.p2align\n"		\
 	    "IRQ" #nr "_interrupt:\n\t"		\
 	    "push $~(" #nr ") ; "		\
-	    "jmp common_interrupt");
+	    "jmp common_interrupt\n"		\
+	    ".previous");
 
 #define BI(x,y) \
 	BUILD_IRQ(x##y)
@@ -199,6 +200,10 @@ void __init native_init_IRQ(void)
 	/* IPI for generic function call */
 	alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
 
+	/* IPI for generic single function call */
+	alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
+			call_function_single_interrupt);
+
 	/* Low priority IPI to cleanup after moving an irq */
 	set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
 #endif
diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c
index c03205991718..f2d43bc75514 100644
--- a/arch/x86/kernel/kdebugfs.c
+++ b/arch/x86/kernel/kdebugfs.c
@@ -12,9 +12,13 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/mm.h>
+#include <linux/module.h>
 
 #include <asm/setup.h>
 
+struct dentry *arch_debugfs_dir;
+EXPORT_SYMBOL(arch_debugfs_dir);
+
 #ifdef CONFIG_DEBUG_BOOT_PARAMS
 struct setup_data_node {
 	u64 paddr;
@@ -209,6 +213,10 @@ static int __init arch_kdebugfs_init(void)
 {
 	int error = 0;
 
+	arch_debugfs_dir = debugfs_create_dir("x86", NULL);
+	if (!arch_debugfs_dir)
+		return -ENOMEM;
+
 #ifdef CONFIG_DEBUG_BOOT_PARAMS
 	error = boot_params_kdebugfs_init();
 #endif
diff --git a/arch/x86/kernel/kprobes.c b/arch/x86/kernel/kprobes.c
index b8c6743a13da..6c27679ec6aa 100644
--- a/arch/x86/kernel/kprobes.c
+++ b/arch/x86/kernel/kprobes.c
@@ -431,7 +431,6 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
 		regs->ip = (unsigned long)p->ainsn.insn;
 }
 
-/* Called with kretprobe_lock held */
 void __kprobes arch_prepare_kretprobe(struct kretprobe_instance *ri,
 				      struct pt_regs *regs)
 {
@@ -682,8 +681,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 	unsigned long trampoline_address = (unsigned long)&kretprobe_trampoline;
 
 	INIT_HLIST_HEAD(&empty_rp);
-	spin_lock_irqsave(&kretprobe_lock, flags);
-	head = kretprobe_inst_table_head(current);
+	kretprobe_hash_lock(current, &head, &flags);
 	/* fixup registers */
 #ifdef CONFIG_X86_64
 	regs->cs = __KERNEL_CS;
@@ -732,7 +730,7 @@ static __used __kprobes void *trampoline_handler(struct pt_regs *regs)
 
 	kretprobe_assert(ri, orig_ret_address, trampoline_address);
 
-	spin_unlock_irqrestore(&kretprobe_lock, flags);
+	kretprobe_hash_unlock(current, &flags);
 
 	hlist_for_each_entry_safe(ri, node, tmp, &empty_rp, hlist) {
 		hlist_del(&ri->hlist);
@@ -860,7 +858,6 @@ static int __kprobes post_kprobe_handler(struct pt_regs *regs)
 
 	resume_execution(cur, regs, kcb);
 	regs->flags |= kcb->kprobe_saved_flags;
-	trace_hardirqs_fixup_flags(regs->flags);
 
 	if ((kcb->kprobe_status != KPROBE_REENTER) && cur->post_handler) {
 		kcb->kprobe_status = KPROBE_HIT_SSDONE;
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 87edf1ceb1df..d02def06ca91 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -113,7 +113,7 @@ static void kvm_setup_secondary_clock(void)
 #endif
 
 #ifdef CONFIG_SMP
-void __init kvm_smp_prepare_boot_cpu(void)
+static void __init kvm_smp_prepare_boot_cpu(void)
 {
 	WARN_ON(kvm_register_clock("primary cpu clock"));
 	native_smp_prepare_boot_cpu();
diff --git a/arch/x86/kernel/ldt.c b/arch/x86/kernel/ldt.c
index 21f2bae98c15..b68e21f06f4f 100644
--- a/arch/x86/kernel/ldt.c
+++ b/arch/x86/kernel/ldt.c
@@ -62,13 +62,11 @@ static int alloc_ldt(mm_context_t *pc, int mincount, int reload)
 
 	if (reload) {
 #ifdef CONFIG_SMP
-		cpumask_t mask;
-
 		preempt_disable();
 		load_LDT(pc);
-		mask = cpumask_of_cpu(smp_processor_id());
-		if (!cpus_equal(current->mm->cpu_vm_mask, mask))
-			smp_call_function(flush_ldt, current->mm, 1, 1);
+		if (!cpus_equal(current->mm->cpu_vm_mask,
+				cpumask_of_cpu(smp_processor_id())))
+			smp_call_function(flush_ldt, current->mm, 1);
 		preempt_enable();
 #else
 		load_LDT(pc);
diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index 8864230d55af..9fe478d98406 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -22,6 +22,7 @@
 #include <asm/cpufeature.h>
 #include <asm/desc.h>
 #include <asm/system.h>
+#include <asm/cacheflush.h>
 
 #define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE)))
 static u32 kexec_pgd[1024] PAGE_ALIGNED;
@@ -85,10 +86,12 @@ static void load_segments(void)
  * reboot code buffer to allow us to avoid allocations
  * later.
  *
- * Currently nothing.
+ * Make control page executable.
  */
 int machine_kexec_prepare(struct kimage *image)
 {
+	if (nx_enabled)
+		set_pages_x(image->control_code_page, 1);
 	return 0;
 }
 
@@ -98,27 +101,48 @@ int machine_kexec_prepare(struct kimage *image)
  */
 void machine_kexec_cleanup(struct kimage *image)
 {
+	if (nx_enabled)
+		set_pages_nx(image->control_code_page, 1);
 }
 
 /*
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list[PAGES_NR];
 	void *control_page;
+	asmlinkage unsigned long
+		(*relocate_kernel_ptr)(unsigned long indirection_page,
+				       unsigned long control_page,
+				       unsigned long start_address,
+				       unsigned int has_pae,
+				       unsigned int preserve_context);
 
 	tracer_disable();
 
 	/* Interrupts aren't acceptable while we reboot */
 	local_irq_disable();
 
+	if (image->preserve_context) {
+#ifdef CONFIG_X86_IO_APIC
+		/* We need to put APICs in legacy mode so that we can
+		 * get timer interrupts in second kernel. kexec/kdump
+		 * paths already have calls to disable_IO_APIC() in
+		 * one form or other. kexec jump path also need
+		 * one.
+		 */
+		disable_IO_APIC();
+#endif
+	}
+
 	control_page = page_address(image->control_code_page);
-	memcpy(control_page, relocate_kernel, PAGE_SIZE);
+	memcpy(control_page, relocate_kernel, PAGE_SIZE/2);
 
+	relocate_kernel_ptr = control_page;
 	page_list[PA_CONTROL_PAGE] = __pa(control_page);
-	page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel;
+	page_list[VA_CONTROL_PAGE] = (unsigned long)control_page;
 	page_list[PA_PGD] = __pa(kexec_pgd);
 	page_list[VA_PGD] = (unsigned long)kexec_pgd;
 #ifdef CONFIG_X86_PAE
@@ -131,6 +155,7 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	page_list[VA_PTE_0] = (unsigned long)kexec_pte0;
 	page_list[PA_PTE_1] = __pa(kexec_pte1);
 	page_list[VA_PTE_1] = (unsigned long)kexec_pte1;
+	page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page) << PAGE_SHIFT);
 
 	/* The segment registers are funny things, they have both a
 	 * visible and an invisible part.  Whenever the visible part is
@@ -149,8 +174,10 @@ NORET_TYPE void machine_kexec(struct kimage *image)
 	set_idt(phys_to_virt(0),0);
 
 	/* now call it */
-	relocate_kernel((unsigned long)image->head, (unsigned long)page_list,
-			image->start, cpu_has_pae);
+	image->start = relocate_kernel_ptr((unsigned long)image->head,
+					   (unsigned long)page_list,
+					   image->start, cpu_has_pae,
+					   image->preserve_context);
 }
 
 void arch_crash_save_vmcoreinfo(void)
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 9dd9262693a3..c43caa3a91f3 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -181,7 +181,7 @@ void machine_kexec_cleanup(struct kimage *image)
  * Do not allocate memory (or fail in any way) in machine_kexec().
  * We are past the point of no return, committed to rebooting now.
  */
-NORET_TYPE void machine_kexec(struct kimage *image)
+void machine_kexec(struct kimage *image)
 {
 	unsigned long page_list[PAGES_NR];
 	void *control_page;
diff --git a/arch/x86/kernel/microcode.c b/arch/x86/kernel/microcode.c
index 56b933119a04..652fa5c38ebe 100644
--- a/arch/x86/kernel/microcode.c
+++ b/arch/x86/kernel/microcode.c
@@ -644,7 +644,9 @@ static void microcode_fini_cpu(int cpu)
 	mutex_unlock(&microcode_mutex);
 }
 
-static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)
+static ssize_t reload_store(struct sys_device *dev,
+			    struct sysdev_attribute *attr,
+			    const char *buf, size_t sz)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
 	char *end;
@@ -655,9 +657,7 @@ static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)
 	if (end == buf)
 		return -EINVAL;
 	if (val == 1) {
-		cpumask_t old;
-
-		old = current->cpus_allowed;
+		cpumask_t old = current->cpus_allowed;
 
 		get_online_cpus();
 		set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
@@ -674,14 +674,16 @@ static ssize_t reload_store(struct sys_device *dev, const char *buf, size_t sz)
 	return sz;
 }
 
-static ssize_t version_show(struct sys_device *dev, char *buf)
+static ssize_t version_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
 
 	return sprintf(buf, "0x%x\n", uci->rev);
 }
 
-static ssize_t pf_show(struct sys_device *dev, char *buf)
+static ssize_t pf_show(struct sys_device *dev,
+			struct sysdev_attribute *attr, char *buf)
 {
 	struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
 
diff --git a/arch/x86/kernel/module_64.c b/arch/x86/kernel/module_64.c
index a888e67f5874..6ba87830d4b1 100644
--- a/arch/x86/kernel/module_64.c
+++ b/arch/x86/kernel/module_64.c
@@ -22,6 +22,7 @@
 #include <linux/fs.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/bug.h>
 
@@ -150,7 +151,8 @@ int module_finalize(const Elf_Ehdr *hdr,
                     const Elf_Shdr *sechdrs,
                     struct module *me)
 {
-	const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL;
+	const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL,
+		*para = NULL;
 	char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
 
 	for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) {
@@ -160,6 +162,8 @@ int module_finalize(const Elf_Ehdr *hdr,
 			alt = s;
 		if (!strcmp(".smp_locks", secstrings + s->sh_name))
 			locks= s;
+		if (!strcmp(".parainstructions", secstrings + s->sh_name))
+			para = s;
 	}
 
 	if (alt) {
@@ -175,6 +179,11 @@ int module_finalize(const Elf_Ehdr *hdr,
 					    tseg, tseg + text->sh_size);
 	}
 
+	if (para) {
+		void *pseg = (void *)para->sh_addr;
+		apply_paravirt(pseg, pseg + para->sh_size);
+	}
+
 	return module_bug_finalize(hdr, sechdrs, me);
 }
 
diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c
index 3b25e49380c6..6ae005ccaed8 100644
--- a/arch/x86/kernel/mpparse.c
+++ b/arch/x86/kernel/mpparse.c
@@ -27,6 +27,7 @@
 #include <asm/bios_ebda.h>
 #include <asm/e820.h>
 #include <asm/trampoline.h>
+#include <asm/setup.h>
 
 #include <mach_apic.h>
 #ifdef CONFIG_X86_32
@@ -48,76 +49,6 @@ static int __init mpf_checksum(unsigned char *mp, int len)
 	return sum & 0xFF;
 }
 
-#ifdef CONFIG_X86_NUMAQ
-int found_numaq;
-/*
- * Have to match translation table entries to main table entries by counter
- * hence the mpc_record variable .... can't see a less disgusting way of
- * doing this ....
- */
-struct mpc_config_translation {
-	unsigned char mpc_type;
-	unsigned char trans_len;
-	unsigned char trans_type;
-	unsigned char trans_quad;
-	unsigned char trans_global;
-	unsigned char trans_local;
-	unsigned short trans_reserved;
-};
-
-
-static int mpc_record;
-static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
-    __cpuinitdata;
-
-static inline int generate_logical_apicid(int quad, int phys_apicid)
-{
-	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
-}
-
-
-static inline int mpc_apic_id(struct mpc_config_processor *m,
-			struct mpc_config_translation *translation_record)
-{
-	int quad = translation_record->trans_quad;
-	int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
-
-	printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
-	       m->mpc_apicid,
-	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
-	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
-	       m->mpc_apicver, quad, logical_apicid);
-	return logical_apicid;
-}
-
-int mp_bus_id_to_node[MAX_MP_BUSSES];
-
-int mp_bus_id_to_local[MAX_MP_BUSSES];
-
-static void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	mp_bus_id_to_node[m->mpc_busid] = quad;
-	mp_bus_id_to_local[m->mpc_busid] = local;
-	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
-	       m->mpc_busid, name, quad);
-}
-
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
-static void mpc_oem_pci_bus(struct mpc_config_bus *m,
-	struct mpc_config_translation *translation)
-{
-	int quad = translation->trans_quad;
-	int local = translation->trans_local;
-
-	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
-}
-
-#endif
-
 static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
 {
 	int apicid;
@@ -127,14 +58,12 @@ static void __cpuinit MP_processor_info(struct mpc_config_processor *m)
 		disabled_cpus++;
 		return;
 	}
-#ifdef CONFIG_X86_NUMAQ
-	if (found_numaq)
-		apicid = mpc_apic_id(m, translation_table[mpc_record]);
+
+	if (x86_quirks->mpc_apic_id)
+		apicid = x86_quirks->mpc_apic_id(m);
 	else
 		apicid = m->mpc_apicid;
-#else
-	apicid = m->mpc_apicid;
-#endif
+
 	if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
 		bootup_cpu = " (Bootup-CPU)";
 		boot_cpu_physical_apicid = m->mpc_apicid;
@@ -151,12 +80,10 @@ static void __init MP_bus_info(struct mpc_config_bus *m)
 	memcpy(str, m->mpc_bustype, 6);
 	str[6] = 0;
 
-#ifdef CONFIG_X86_NUMAQ
-	if (found_numaq)
-		mpc_oem_bus_info(m, str, translation_table[mpc_record]);
-#else
-	printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str);
-#endif
+	if (x86_quirks->mpc_oem_bus_info)
+		x86_quirks->mpc_oem_bus_info(m, str);
+	else
+		printk(KERN_INFO "Bus #%d is %s\n", m->mpc_busid, str);
 
 #if MAX_MP_BUSSES < 256
 	if (m->mpc_busid >= MAX_MP_BUSSES) {
@@ -173,10 +100,9 @@ static void __init MP_bus_info(struct mpc_config_bus *m)
 		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
 #endif
 	} else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
-#ifdef CONFIG_X86_NUMAQ
-		if (found_numaq)
-			mpc_oem_pci_bus(m, translation_table[mpc_record]);
-#endif
+		if (x86_quirks->mpc_oem_pci_bus)
+			x86_quirks->mpc_oem_pci_bus(m);
+
 		clear_bit(m->mpc_busid, mp_bus_not_pci);
 #if defined(CONFIG_EISA) || defined (CONFIG_MCA)
 		mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
@@ -316,83 +242,6 @@ static void __init MP_lintsrc_info(struct mpc_config_lintsrc *m)
 		m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
 }
 
-#ifdef CONFIG_X86_NUMAQ
-static void __init MP_translation_info(struct mpc_config_translation *m)
-{
-	printk(KERN_INFO
-	       "Translation: record %d, type %d, quad %d, global %d, local %d\n",
-	       mpc_record, m->trans_type, m->trans_quad, m->trans_global,
-	       m->trans_local);
-
-	if (mpc_record >= MAX_MPC_ENTRY)
-		printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
-	else
-		translation_table[mpc_record] = m;	/* stash this for later */
-	if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
-		node_set_online(m->trans_quad);
-}
-
-/*
- * Read/parse the MPC oem tables
- */
-
-static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
-				    unsigned short oemsize)
-{
-	int count = sizeof(*oemtable);	/* the header size */
-	unsigned char *oemptr = ((unsigned char *)oemtable) + count;
-
-	mpc_record = 0;
-	printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n",
-	       oemtable);
-	if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) {
-		printk(KERN_WARNING
-		       "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
-		       oemtable->oem_signature[0], oemtable->oem_signature[1],
-		       oemtable->oem_signature[2], oemtable->oem_signature[3]);
-		return;
-	}
-	if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) {
-		printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
-		return;
-	}
-	while (count < oemtable->oem_length) {
-		switch (*oemptr) {
-		case MP_TRANSLATION:
-			{
-				struct mpc_config_translation *m =
-				    (struct mpc_config_translation *)oemptr;
-				MP_translation_info(m);
-				oemptr += sizeof(*m);
-				count += sizeof(*m);
-				++mpc_record;
-				break;
-			}
-		default:
-			{
-				printk(KERN_WARNING
-				       "Unrecognised OEM table entry type! - %d\n",
-				       (int)*oemptr);
-				return;
-			}
-		}
-	}
-}
-
-void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
-				 char *productid)
-{
-	if (strncmp(oem, "IBM NUMA", 8))
-		printk("Warning!  Not a NUMA-Q system!\n");
-	else
-		found_numaq = 1;
-
-	if (mpc->mpc_oemptr)
-		smp_read_mpc_oem((struct mp_config_oemtable *)mpc->mpc_oemptr,
-				 mpc->mpc_oemsize);
-}
-#endif /* CONFIG_X86_NUMAQ */
-
 /*
  * Read/parse the MPC
  */
@@ -457,7 +306,6 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
 	} else
 		mps_oem_check(mpc, oem, str);
 #endif
-
 	/* save the local APIC address, it might be non-default */
 	if (!acpi_lapic)
 		mp_lapic_addr = mpc->mpc_lapic;
@@ -465,12 +313,17 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
 	if (early)
 		return 1;
 
+	if (mpc->mpc_oemptr && x86_quirks->smp_read_mpc_oem) {
+		struct mp_config_oemtable *oem_table = (struct mp_config_oemtable *)(unsigned long)mpc->mpc_oemptr;
+		x86_quirks->smp_read_mpc_oem(oem_table, mpc->mpc_oemsize);
+	}
+
 	/*
 	 *      Now process the configuration blocks.
 	 */
-#ifdef CONFIG_X86_NUMAQ
-	mpc_record = 0;
-#endif
+	if (x86_quirks->mpc_record)
+		*x86_quirks->mpc_record = 0;
+
 	while (count < mpc->mpc_length) {
 		switch (*mpt) {
 		case MP_PROCESSOR:
@@ -536,9 +389,8 @@ static int __init smp_read_mpc(struct mp_config_table *mpc, unsigned early)
 			count = mpc->mpc_length;
 			break;
 		}
-#ifdef CONFIG_X86_NUMAQ
-		++mpc_record;
-#endif
+		if (x86_quirks->mpc_record)
+			(*x86_quirks->mpc_record)++;
 	}
 
 #ifdef CONFIG_X86_GENERICARCH
@@ -726,20 +578,14 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 static struct intel_mp_floating *mpf_found;
 
 /*
- * Machine specific quirk for finding the SMP config before other setup
- * activities destroy the table:
- */
-int (*mach_get_smp_config_quirk)(unsigned int early);
-
-/*
  * Scan the memory blocks for an SMP configuration block.
  */
 static void __init __get_smp_config(unsigned int early)
 {
 	struct intel_mp_floating *mpf = mpf_found;
 
-	if (mach_get_smp_config_quirk) {
-		if (mach_get_smp_config_quirk(early))
+	if (x86_quirks->mach_get_smp_config) {
+		if (x86_quirks->mach_get_smp_config(early))
 			return;
 	}
 	if (acpi_lapic && early)
@@ -899,14 +745,12 @@ static int __init smp_scan_config(unsigned long base, unsigned long length,
 	return 0;
 }
 
-int (*mach_find_smp_config_quirk)(unsigned int reserve);
-
 static void __init __find_smp_config(unsigned int reserve)
 {
 	unsigned int address;
 
-	if (mach_find_smp_config_quirk) {
-		if (mach_find_smp_config_quirk(reserve))
+	if (x86_quirks->mach_find_smp_config) {
+		if (x86_quirks->mach_find_smp_config(reserve))
 			return;
 	}
 	/*
diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c
index a153b3905f60..9fd809552447 100644
--- a/arch/x86/kernel/msr.c
+++ b/arch/x86/kernel/msr.c
@@ -149,8 +149,8 @@ static int __cpuinit msr_device_create(int cpu)
 {
 	struct device *dev;
 
-	dev = device_create(msr_class, NULL, MKDEV(MSR_MAJOR, cpu),
-			    "msr%d", cpu);
+	dev = device_create_drvdata(msr_class, NULL, MKDEV(MSR_MAJOR, cpu),
+				    NULL, "msr%d", cpu);
 	return IS_ERR(dev) ? PTR_ERR(dev) : 0;
 }
 
diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c
index 716b89284be0..ac6d51222e7d 100644
--- a/arch/x86/kernel/nmi.c
+++ b/arch/x86/kernel/nmi.c
@@ -130,7 +130,7 @@ int __init check_nmi_watchdog(void)
 
 #ifdef CONFIG_SMP
 	if (nmi_watchdog == NMI_LOCAL_APIC)
-		smp_call_function(nmi_cpu_busy, (void *)&endflag, 0, 0);
+		smp_call_function(nmi_cpu_busy, (void *)&endflag, 0);
 #endif
 
 	for_each_possible_cpu(cpu)
@@ -263,7 +263,7 @@ late_initcall(init_lapic_nmi_sysfs);
 
 static void __acpi_nmi_enable(void *__unused)
 {
-	apic_write_around(APIC_LVT0, APIC_DM_NMI);
+	apic_write(APIC_LVT0, APIC_DM_NMI);
 }
 
 /*
@@ -272,12 +272,12 @@ static void __acpi_nmi_enable(void *__unused)
 void acpi_nmi_enable(void)
 {
 	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_enable, NULL, 0, 1);
+		on_each_cpu(__acpi_nmi_enable, NULL, 1);
 }
 
 static void __acpi_nmi_disable(void *__unused)
 {
-	apic_write_around(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
+	apic_write(APIC_LVT0, APIC_DM_NMI | APIC_LVT_MASKED);
 }
 
 /*
@@ -286,7 +286,7 @@ static void __acpi_nmi_disable(void *__unused)
 void acpi_nmi_disable(void)
 {
 	if (atomic_read(&nmi_active) && nmi_watchdog == NMI_IO_APIC)
-		on_each_cpu(__acpi_nmi_disable, NULL, 0, 1);
+		on_each_cpu(__acpi_nmi_disable, NULL, 1);
 }
 
 void setup_apic_nmi_watchdog(void *unused)
@@ -448,6 +448,13 @@ nmi_watchdog_tick(struct pt_regs *regs, unsigned reason)
 
 #ifdef CONFIG_SYSCTL
 
+static int __init setup_unknown_nmi_panic(char *str)
+{
+	unknown_nmi_panic = 1;
+	return 1;
+}
+__setup("unknown_nmi_panic", setup_unknown_nmi_panic);
+
 static int unknown_nmi_panic_callback(struct pt_regs *regs, int cpu)
 {
 	unsigned char reason = get_nmi_reason();
diff --git a/arch/x86/kernel/numaq_32.c b/arch/x86/kernel/numaq_32.c
index 5b20a5e7ac28..b8c45610b20a 100644
--- a/arch/x86/kernel/numaq_32.c
+++ b/arch/x86/kernel/numaq_32.c
@@ -33,6 +33,7 @@
 #include <asm/processor.h>
 #include <asm/mpspec.h>
 #include <asm/e820.h>
+#include <asm/setup.h>
 
 #define	MB_TO_PAGES(addr) ((addr) << (20 - PAGE_SHIFT))
 
@@ -71,6 +72,188 @@ static void __init smp_dump_qct(void)
 	}
 }
 
+
+void __init numaq_tsc_disable(void)
+{
+	if (!found_numaq)
+		return;
+
+	if (num_online_nodes() > 1) {
+		printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
+		setup_clear_cpu_cap(X86_FEATURE_TSC);
+	}
+}
+
+static int __init numaq_pre_time_init(void)
+{
+	numaq_tsc_disable();
+	return 0;
+}
+
+int found_numaq;
+/*
+ * Have to match translation table entries to main table entries by counter
+ * hence the mpc_record variable .... can't see a less disgusting way of
+ * doing this ....
+ */
+struct mpc_config_translation {
+	unsigned char mpc_type;
+	unsigned char trans_len;
+	unsigned char trans_type;
+	unsigned char trans_quad;
+	unsigned char trans_global;
+	unsigned char trans_local;
+	unsigned short trans_reserved;
+};
+
+/* x86_quirks member */
+static int mpc_record;
+static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY]
+    __cpuinitdata;
+
+static inline int generate_logical_apicid(int quad, int phys_apicid)
+{
+	return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
+}
+
+/* x86_quirks member */
+static int mpc_apic_id(struct mpc_config_processor *m)
+{
+	int quad = translation_table[mpc_record]->trans_quad;
+	int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
+
+	printk(KERN_DEBUG "Processor #%d %u:%u APIC version %d (quad %d, apic %d)\n",
+	       m->mpc_apicid,
+	       (m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+	       (m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+	       m->mpc_apicver, quad, logical_apicid);
+	return logical_apicid;
+}
+
+int mp_bus_id_to_node[MAX_MP_BUSSES];
+
+int mp_bus_id_to_local[MAX_MP_BUSSES];
+
+/* x86_quirks member */
+static void mpc_oem_bus_info(struct mpc_config_bus *m, char *name)
+{
+	int quad = translation_table[mpc_record]->trans_quad;
+	int local = translation_table[mpc_record]->trans_local;
+
+	mp_bus_id_to_node[m->mpc_busid] = quad;
+	mp_bus_id_to_local[m->mpc_busid] = local;
+	printk(KERN_INFO "Bus #%d is %s (node %d)\n",
+	       m->mpc_busid, name, quad);
+}
+
+int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+
+/* x86_quirks member */
+static void mpc_oem_pci_bus(struct mpc_config_bus *m)
+{
+	int quad = translation_table[mpc_record]->trans_quad;
+	int local = translation_table[mpc_record]->trans_local;
+
+	quad_local_to_mp_bus_id[quad][local] = m->mpc_busid;
+}
+
+static void __init MP_translation_info(struct mpc_config_translation *m)
+{
+	printk(KERN_INFO
+	       "Translation: record %d, type %d, quad %d, global %d, local %d\n",
+	       mpc_record, m->trans_type, m->trans_quad, m->trans_global,
+	       m->trans_local);
+
+	if (mpc_record >= MAX_MPC_ENTRY)
+		printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
+	else
+		translation_table[mpc_record] = m;	/* stash this for later */
+	if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
+		node_set_online(m->trans_quad);
+}
+
+static int __init mpf_checksum(unsigned char *mp, int len)
+{
+	int sum = 0;
+
+	while (len--)
+		sum += *mp++;
+
+	return sum & 0xFF;
+}
+
+/*
+ * Read/parse the MPC oem tables
+ */
+
+static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable,
+				    unsigned short oemsize)
+{
+	int count = sizeof(*oemtable);	/* the header size */
+	unsigned char *oemptr = ((unsigned char *)oemtable) + count;
+
+	mpc_record = 0;
+	printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n",
+	       oemtable);
+	if (memcmp(oemtable->oem_signature, MPC_OEM_SIGNATURE, 4)) {
+		printk(KERN_WARNING
+		       "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
+		       oemtable->oem_signature[0], oemtable->oem_signature[1],
+		       oemtable->oem_signature[2], oemtable->oem_signature[3]);
+		return;
+	}
+	if (mpf_checksum((unsigned char *)oemtable, oemtable->oem_length)) {
+		printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
+		return;
+	}
+	while (count < oemtable->oem_length) {
+		switch (*oemptr) {
+		case MP_TRANSLATION:
+			{
+				struct mpc_config_translation *m =
+				    (struct mpc_config_translation *)oemptr;
+				MP_translation_info(m);
+				oemptr += sizeof(*m);
+				count += sizeof(*m);
+				++mpc_record;
+				break;
+			}
+		default:
+			{
+				printk(KERN_WARNING
+				       "Unrecognised OEM table entry type! - %d\n",
+				       (int)*oemptr);
+				return;
+			}
+		}
+	}
+}
+
+static struct x86_quirks numaq_x86_quirks __initdata = {
+	.arch_pre_time_init	= numaq_pre_time_init,
+	.arch_time_init		= NULL,
+	.arch_pre_intr_init	= NULL,
+	.arch_memory_setup	= NULL,
+	.arch_intr_init		= NULL,
+	.arch_trap_init		= NULL,
+	.mach_get_smp_config	= NULL,
+	.mach_find_smp_config	= NULL,
+	.mpc_record		= &mpc_record,
+	.mpc_apic_id		= mpc_apic_id,
+	.mpc_oem_bus_info	= mpc_oem_bus_info,
+	.mpc_oem_pci_bus	= mpc_oem_pci_bus,
+	.smp_read_mpc_oem	= smp_read_mpc_oem,
+};
+
+void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem,
+				 char *productid)
+{
+	if (strncmp(oem, "IBM NUMA", 8))
+		printk("Warning!  Not a NUMA-Q system!\n");
+	else
+		found_numaq = 1;
+}
+
 static __init void early_check_numaq(void)
 {
 	/*
@@ -82,6 +265,9 @@ static __init void early_check_numaq(void)
 	 */
 	if (smp_found_config)
 		early_get_smp_config();
+
+	if (found_numaq)
+		x86_quirks = &numaq_x86_quirks;
 }
 
 int __init get_memcfg_numaq(void)
@@ -92,14 +278,3 @@ int __init get_memcfg_numaq(void)
 	smp_dump_qct();
 	return 1;
 }
-
-void __init numaq_tsc_disable(void)
-{
-	if (!found_numaq)
-		return -1;
-
-	if (num_online_nodes() > 1) {
-		printk(KERN_DEBUG "NUMAQ: disabling TSC\n");
-		setup_clear_cpu_cap(X86_FEATURE_TSC);
-	}
-}
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index e0f571d58c19..94da4d52d798 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -29,6 +29,7 @@
 #include <asm/desc.h>
 #include <asm/setup.h>
 #include <asm/arch_hooks.h>
+#include <asm/pgtable.h>
 #include <asm/time.h>
 #include <asm/pgalloc.h>
 #include <asm/irq.h>
@@ -123,6 +124,7 @@ static void *get_call_destination(u8 type)
 		.pv_irq_ops = pv_irq_ops,
 		.pv_apic_ops = pv_apic_ops,
 		.pv_mmu_ops = pv_mmu_ops,
+		.pv_lock_ops = pv_lock_ops,
 	};
 	return *((void **)&tmpl + type);
 }
@@ -266,6 +268,17 @@ enum paravirt_lazy_mode paravirt_get_lazy_mode(void)
 	return __get_cpu_var(paravirt_lazy_mode);
 }
 
+void __init paravirt_use_bytelocks(void)
+{
+#ifdef CONFIG_SMP
+	pv_lock_ops.spin_is_locked = __byte_spin_is_locked;
+	pv_lock_ops.spin_is_contended = __byte_spin_is_contended;
+	pv_lock_ops.spin_lock = __byte_spin_lock;
+	pv_lock_ops.spin_trylock = __byte_spin_trylock;
+	pv_lock_ops.spin_unlock = __byte_spin_unlock;
+#endif
+}
+
 struct pv_info pv_info = {
 	.name = "bare hardware",
 	.paravirt_enabled = 0,
@@ -361,7 +374,6 @@ struct pv_cpu_ops pv_cpu_ops = {
 struct pv_apic_ops pv_apic_ops = {
 #ifdef CONFIG_X86_LOCAL_APIC
 	.apic_write = native_apic_write,
-	.apic_write_atomic = native_apic_write_atomic,
 	.apic_read = native_apic_read,
 	.setup_boot_clock = setup_boot_APIC_clock,
 	.setup_secondary_clock = setup_secondary_APIC_clock,
@@ -373,6 +385,9 @@ struct pv_mmu_ops pv_mmu_ops = {
 #ifndef CONFIG_X86_64
 	.pagetable_setup_start = native_pagetable_setup_start,
 	.pagetable_setup_done = native_pagetable_setup_done,
+#else
+	.pagetable_setup_start = paravirt_nop,
+	.pagetable_setup_done = paravirt_nop,
 #endif
 
 	.read_cr2 = native_read_cr2,
@@ -428,7 +443,7 @@ struct pv_mmu_ops pv_mmu_ops = {
 #endif /* PAGETABLE_LEVELS >= 3 */
 
 	.pte_val = native_pte_val,
-	.pte_flags = native_pte_val,
+	.pte_flags = native_pte_flags,
 	.pgd_val = native_pgd_val,
 
 	.make_pte = native_make_pte,
@@ -446,6 +461,18 @@ struct pv_mmu_ops pv_mmu_ops = {
 	.set_fixmap = native_set_fixmap,
 };
 
+struct pv_lock_ops pv_lock_ops = {
+#ifdef CONFIG_SMP
+	.spin_is_locked = __ticket_spin_is_locked,
+	.spin_is_contended = __ticket_spin_is_contended,
+
+	.spin_lock = __ticket_spin_lock,
+	.spin_trylock = __ticket_spin_trylock,
+	.spin_unlock = __ticket_spin_unlock,
+#endif
+};
+EXPORT_SYMBOL_GPL(pv_lock_ops);
+
 EXPORT_SYMBOL_GPL(pv_time_ops);
 EXPORT_SYMBOL    (pv_cpu_ops);
 EXPORT_SYMBOL    (pv_mmu_ops);
diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c
index 6959b5c45df4..b67a4b1d4eae 100644
--- a/arch/x86/kernel/pci-calgary_64.c
+++ b/arch/x86/kernel/pci-calgary_64.c
@@ -29,6 +29,7 @@
 #include <linux/mm.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
+#include <linux/crash_dump.h>
 #include <linux/dma-mapping.h>
 #include <linux/bitops.h>
 #include <linux/pci_ids.h>
@@ -36,7 +37,8 @@
 #include <linux/delay.h>
 #include <linux/scatterlist.h>
 #include <linux/iommu-helper.h>
-#include <asm/gart.h>
+
+#include <asm/iommu.h>
 #include <asm/calgary.h>
 #include <asm/tce.h>
 #include <asm/pci-direct.h>
@@ -167,6 +169,8 @@ static void calgary_dump_error_regs(struct iommu_table *tbl);
 static void calioc2_handle_quirks(struct iommu_table *tbl, struct pci_dev *dev);
 static void calioc2_tce_cache_blast(struct iommu_table *tbl);
 static void calioc2_dump_error_regs(struct iommu_table *tbl);
+static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl);
+static void get_tce_space_from_tar(void);
 
 static struct cal_chipset_ops calgary_chip_ops = {
 	.handle_quirks = calgary_handle_quirks,
@@ -410,22 +414,6 @@ static void calgary_unmap_sg(struct device *dev,
 	}
 }
 
-static int calgary_nontranslate_map_sg(struct device* dev,
-	struct scatterlist *sg, int nelems, int direction)
-{
-	struct scatterlist *s;
-	int i;
-
-	for_each_sg(sg, s, nelems, i) {
-		struct page *p = sg_page(s);
-
-		BUG_ON(!p);
-		s->dma_address = virt_to_bus(sg_virt(s));
-		s->dma_length = s->length;
-	}
-	return nelems;
-}
-
 static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
 	int nelems, int direction)
 {
@@ -436,9 +424,6 @@ static int calgary_map_sg(struct device *dev, struct scatterlist *sg,
 	unsigned long entry;
 	int i;
 
-	if (!translation_enabled(tbl))
-		return calgary_nontranslate_map_sg(dev, sg, nelems, direction);
-
 	for_each_sg(sg, s, nelems, i) {
 		BUG_ON(!sg_page(s));
 
@@ -474,7 +459,6 @@ error:
 static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr,
 	size_t size, int direction)
 {
-	dma_addr_t dma_handle = bad_dma_address;
 	void *vaddr = phys_to_virt(paddr);
 	unsigned long uaddr;
 	unsigned int npages;
@@ -483,12 +467,7 @@ static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr,
 	uaddr = (unsigned long)vaddr;
 	npages = num_dma_pages(uaddr, size);
 
-	if (translation_enabled(tbl))
-		dma_handle = iommu_alloc(dev, tbl, vaddr, npages, direction);
-	else
-		dma_handle = virt_to_bus(vaddr);
-
-	return dma_handle;
+	return iommu_alloc(dev, tbl, vaddr, npages, direction);
 }
 
 static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle,
@@ -497,9 +476,6 @@ static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle,
 	struct iommu_table *tbl = find_iommu_table(dev);
 	unsigned int npages;
 
-	if (!translation_enabled(tbl))
-		return;
-
 	npages = num_dma_pages(dma_handle, size);
 	iommu_free(tbl, dma_handle, npages);
 }
@@ -522,18 +498,12 @@ static void* calgary_alloc_coherent(struct device *dev, size_t size,
 		goto error;
 	memset(ret, 0, size);
 
-	if (translation_enabled(tbl)) {
-		/* set up tces to cover the allocated range */
-		mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL);
-		if (mapping == bad_dma_address)
-			goto free;
-
-		*dma_handle = mapping;
-	} else /* non translated slot */
-		*dma_handle = virt_to_bus(ret);
-
+	/* set up tces to cover the allocated range */
+	mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL);
+	if (mapping == bad_dma_address)
+		goto free;
+	*dma_handle = mapping;
 	return ret;
-
 free:
 	free_pages((unsigned long)ret, get_order(size));
 	ret = NULL;
@@ -541,7 +511,7 @@ error:
 	return ret;
 }
 
-static const struct dma_mapping_ops calgary_dma_ops = {
+static struct dma_mapping_ops calgary_dma_ops = {
 	.alloc_coherent = calgary_alloc_coherent,
 	.map_single = calgary_map_single,
 	.unmap_single = calgary_unmap_single,
@@ -830,7 +800,11 @@ static int __init calgary_setup_tar(struct pci_dev *dev, void __iomem *bbar)
 
 	tbl = pci_iommu(dev->bus);
 	tbl->it_base = (unsigned long)bus_info[dev->bus->number].tce_space;
-	tce_free(tbl, 0, tbl->it_size);
+
+	if (is_kdump_kernel())
+		calgary_init_bitmap_from_tce_table(tbl);
+	else
+		tce_free(tbl, 0, tbl->it_size);
 
 	if (is_calgary(dev->device))
 		tbl->chip_ops = &calgary_chip_ops;
@@ -1209,6 +1183,10 @@ static int __init calgary_init(void)
 	if (ret)
 		return ret;
 
+	/* Purely for kdump kernel case */
+	if (is_kdump_kernel())
+		get_tce_space_from_tar();
+
 	do {
 		dev = pci_get_device(PCI_VENDOR_ID_IBM, PCI_ANY_ID, dev);
 		if (!dev)
@@ -1230,6 +1208,16 @@ static int __init calgary_init(void)
 			goto error;
 	} while (1);
 
+	dev = NULL;
+	for_each_pci_dev(dev) {
+		struct iommu_table *tbl;
+
+		tbl = find_iommu_table(&dev->dev);
+
+		if (translation_enabled(tbl))
+			dev->dev.archdata.dma_ops = &calgary_dma_ops;
+	}
+
 	return ret;
 
 error:
@@ -1251,6 +1239,7 @@ error:
 		calgary_disable_translation(dev);
 		calgary_free_bus(dev);
 		pci_dev_put(dev); /* Undo calgary_init_one()'s pci_dev_get() */
+		dev->dev.archdata.dma_ops = NULL;
 	} while (1);
 
 	return ret;
@@ -1339,6 +1328,61 @@ static int __init calgary_bus_has_devices(int bus, unsigned short pci_dev)
 	return (val != 0xffffffff);
 }
 
+/*
+ * calgary_init_bitmap_from_tce_table():
+ * Funtion for kdump case. In the second/kdump kernel initialize
+ * the bitmap based on the tce table entries obtained from first kernel
+ */
+static void calgary_init_bitmap_from_tce_table(struct iommu_table *tbl)
+{
+	u64 *tp;
+	unsigned int index;
+	tp = ((u64 *)tbl->it_base);
+	for (index = 0 ; index < tbl->it_size; index++) {
+		if (*tp != 0x0)
+			set_bit(index, tbl->it_map);
+		tp++;
+	}
+}
+
+/*
+ * get_tce_space_from_tar():
+ * Function for kdump case. Get the tce tables from first kernel
+ * by reading the contents of the base adress register of calgary iommu
+ */
+static void get_tce_space_from_tar()
+{
+	int bus;
+	void __iomem *target;
+	unsigned long tce_space;
+
+	for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
+		struct calgary_bus_info *info = &bus_info[bus];
+		unsigned short pci_device;
+		u32 val;
+
+		val = read_pci_config(bus, 0, 0, 0);
+		pci_device = (val & 0xFFFF0000) >> 16;
+
+		if (!is_cal_pci_dev(pci_device))
+			continue;
+		if (info->translation_disabled)
+			continue;
+
+		if (calgary_bus_has_devices(bus, pci_device) ||
+						translate_empty_slots) {
+			target = calgary_reg(bus_info[bus].bbar,
+						tar_offset(bus));
+			tce_space = be64_to_cpu(readq(target));
+			tce_space = tce_space & TAR_SW_BITS;
+
+			tce_space = tce_space & (~specified_table_size);
+			info->tce_space = (u64 *)__va(tce_space);
+		}
+	}
+	return;
+}
+
 void __init detect_calgary(void)
 {
 	int bus;
@@ -1394,7 +1438,8 @@ void __init detect_calgary(void)
 		return;
 	}
 
-	specified_table_size = determine_tce_table_size(max_pfn * PAGE_SIZE);
+	specified_table_size = determine_tce_table_size((is_kdump_kernel() ?
+					saved_max_pfn : max_pfn) * PAGE_SIZE);
 
 	for (bus = 0; bus < MAX_PHB_BUS_NUM; bus++) {
 		struct calgary_bus_info *info = &bus_info[bus];
@@ -1412,10 +1457,16 @@ void __init detect_calgary(void)
 
 		if (calgary_bus_has_devices(bus, pci_device) ||
 		    translate_empty_slots) {
-			tbl = alloc_tce_table();
-			if (!tbl)
-				goto cleanup;
-			info->tce_space = tbl;
+			/*
+			 * If it is kdump kernel, find and use tce tables
+			 * from first kernel, else allocate tce tables here
+			 */
+			if (!is_kdump_kernel()) {
+				tbl = alloc_tce_table();
+				if (!tbl)
+					goto cleanup;
+				info->tce_space = tbl;
+			}
 			calgary_found = 1;
 		}
 	}
@@ -1430,6 +1481,10 @@ void __init detect_calgary(void)
 		printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, "
 		       "CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size,
 		       debugging ? "enabled" : "disabled");
+
+		/* swiotlb for devices that aren't behind the Calgary. */
+		if (max_pfn > MAX_DMA32_PFN)
+			swiotlb = 1;
 	}
 	return;
 
@@ -1446,7 +1501,7 @@ int __init calgary_iommu_init(void)
 {
 	int ret;
 
-	if (no_iommu || swiotlb)
+	if (no_iommu || (swiotlb && !calgary_detected))
 		return -ENODEV;
 
 	if (!calgary_detected)
@@ -1459,15 +1514,14 @@ int __init calgary_iommu_init(void)
 	if (ret) {
 		printk(KERN_ERR "PCI-DMA: Calgary init failed %d, "
 		       "falling back to no_iommu\n", ret);
-		if (max_pfn > MAX_DMA32_PFN)
-			printk(KERN_ERR "WARNING more than 4GB of memory, "
-					"32bit PCI may malfunction.\n");
 		return ret;
 	}
 
 	force_iommu = 1;
 	bad_dma_address = 0x0;
-	dma_ops = &calgary_dma_ops;
+	/* dma_ops is set to swiotlb or nommu */
+	if (!dma_ops)
+		dma_ops = &nommu_dma_ops;
 
 	return 0;
 }
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 8467ec2320f1..87d4d6964ec2 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -5,14 +5,13 @@
 
 #include <asm/proto.h>
 #include <asm/dma.h>
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/calgary.h>
 #include <asm/amd_iommu.h>
 
-int forbid_dac __read_mostly;
-EXPORT_SYMBOL(forbid_dac);
+static int forbid_dac __read_mostly;
 
-const struct dma_mapping_ops *dma_ops;
+struct dma_mapping_ops *dma_ops;
 EXPORT_SYMBOL(dma_ops);
 
 static int iommu_sac_force __read_mostly;
@@ -114,22 +113,24 @@ void __init pci_iommu_alloc(void)
 	 * The order of these functions is important for
 	 * fall-back/fail-over reasons
 	 */
-#ifdef CONFIG_GART_IOMMU
 	gart_iommu_hole_init();
-#endif
 
-#ifdef CONFIG_CALGARY_IOMMU
 	detect_calgary();
-#endif
 
 	detect_intel_iommu();
 
 	amd_iommu_detect();
 
-#ifdef CONFIG_SWIOTLB
 	pci_swiotlb_init();
-#endif
 }
+
+unsigned long iommu_num_pages(unsigned long addr, unsigned long len)
+{
+	unsigned long size = roundup((addr & ~PAGE_MASK) + len, PAGE_SIZE);
+
+	return size >> PAGE_SHIFT;
+}
+EXPORT_SYMBOL(iommu_num_pages);
 #endif
 
 /*
@@ -184,9 +185,7 @@ static __init int iommu_setup(char *p)
 			swiotlb = 1;
 #endif
 
-#ifdef CONFIG_GART_IOMMU
 		gart_parse_options(p);
-#endif
 
 #ifdef CONFIG_CALGARY_IOMMU
 		if (!strncmp(p, "calgary", 7))
@@ -201,136 +200,19 @@ static __init int iommu_setup(char *p)
 }
 early_param("iommu", iommu_setup);
 
-#ifdef CONFIG_X86_32
-int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr,
-				dma_addr_t device_addr, size_t size, int flags)
-{
-	void __iomem *mem_base = NULL;
-	int pages = size >> PAGE_SHIFT;
-	int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long);
-
-	if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0)
-		goto out;
-	if (!size)
-		goto out;
-	if (dev->dma_mem)
-		goto out;
-
-	/* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */
-
-	mem_base = ioremap(bus_addr, size);
-	if (!mem_base)
-		goto out;
-
-	dev->dma_mem = kzalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL);
-	if (!dev->dma_mem)
-		goto out;
-	dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
-	if (!dev->dma_mem->bitmap)
-		goto free1_out;
-
-	dev->dma_mem->virt_base = mem_base;
-	dev->dma_mem->device_base = device_addr;
-	dev->dma_mem->size = pages;
-	dev->dma_mem->flags = flags;
-
-	if (flags & DMA_MEMORY_MAP)
-		return DMA_MEMORY_MAP;
-
-	return DMA_MEMORY_IO;
-
- free1_out:
-	kfree(dev->dma_mem);
- out:
-	if (mem_base)
-		iounmap(mem_base);
-	return 0;
-}
-EXPORT_SYMBOL(dma_declare_coherent_memory);
-
-void dma_release_declared_memory(struct device *dev)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-
-	if (!mem)
-		return;
-	dev->dma_mem = NULL;
-	iounmap(mem->virt_base);
-	kfree(mem->bitmap);
-	kfree(mem);
-}
-EXPORT_SYMBOL(dma_release_declared_memory);
-
-void *dma_mark_declared_memory_occupied(struct device *dev,
-					dma_addr_t device_addr, size_t size)
-{
-	struct dma_coherent_mem *mem = dev->dma_mem;
-	int pos, err;
-	int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1);
-
-	pages >>= PAGE_SHIFT;
-
-	if (!mem)
-		return ERR_PTR(-EINVAL);
-
-	pos = (device_addr - mem->device_base) >> PAGE_SHIFT;
-	err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages));
-	if (err != 0)
-		return ERR_PTR(err);
-	return mem->virt_base + (pos << PAGE_SHIFT);
-}
-EXPORT_SYMBOL(dma_mark_declared_memory_occupied);
-
-static int dma_alloc_from_coherent_mem(struct device *dev, ssize_t size,
-				       dma_addr_t *dma_handle, void **ret)
-{
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
-	int order = get_order(size);
-
-	if (mem) {
-		int page = bitmap_find_free_region(mem->bitmap, mem->size,
-						     order);
-		if (page >= 0) {
-			*dma_handle = mem->device_base + (page << PAGE_SHIFT);
-			*ret = mem->virt_base + (page << PAGE_SHIFT);
-			memset(*ret, 0, size);
-		}
-		if (mem->flags & DMA_MEMORY_EXCLUSIVE)
-			*ret = NULL;
-	}
-	return (mem != NULL);
-}
-
-static int dma_release_coherent(struct device *dev, int order, void *vaddr)
-{
-	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;
-
-	if (mem && vaddr >= mem->virt_base && vaddr <
-		   (mem->virt_base + (mem->size << PAGE_SHIFT))) {
-		int page = (vaddr - mem->virt_base) >> PAGE_SHIFT;
-
-		bitmap_release_region(mem->bitmap, page, order);
-		return 1;
-	}
-	return 0;
-}
-#else
-#define dma_alloc_from_coherent_mem(dev, size, handle, ret) (0)
-#define dma_release_coherent(dev, order, vaddr) (0)
-#endif /* CONFIG_X86_32 */
-
 int dma_supported(struct device *dev, u64 mask)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
 #ifdef CONFIG_PCI
 	if (mask > 0xffffffff && forbid_dac > 0) {
-		printk(KERN_INFO "PCI: Disallowing DAC for device %s\n",
-				 dev->bus_id);
+		dev_info(dev, "PCI: Disallowing DAC for device\n");
 		return 0;
 	}
 #endif
 
-	if (dma_ops->dma_supported)
-		return dma_ops->dma_supported(dev, mask);
+	if (ops->dma_supported)
+		return ops->dma_supported(dev, mask);
 
 	/* Copied from i386. Doesn't make much sense, because it will
 	   only work for pci_alloc_coherent.
@@ -351,8 +233,7 @@ int dma_supported(struct device *dev, u64 mask)
 	   type. Normally this doesn't make any difference, but gives
 	   more gentle handling of IOMMU overflow. */
 	if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) {
-		printk(KERN_INFO "%s: Force SAC with mask %Lx\n",
-				 dev->bus_id, mask);
+		dev_info(dev, "Force SAC with mask %Lx\n", mask);
 		return 0;
 	}
 
@@ -378,6 +259,7 @@ void *
 dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		   gfp_t gfp)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
 	void *memory = NULL;
 	struct page *page;
 	unsigned long dma_mask = 0;
@@ -387,7 +269,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 	/* ignore region specifiers */
 	gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
 
-	if (dma_alloc_from_coherent_mem(dev, size, dma_handle, &memory))
+	if (dma_alloc_from_coherent(dev, size, dma_handle, &memory))
 		return memory;
 
 	if (!dev) {
@@ -446,8 +328,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 			/* Let low level make its own zone decisions */
 			gfp &= ~(GFP_DMA32|GFP_DMA);
 
-			if (dma_ops->alloc_coherent)
-				return dma_ops->alloc_coherent(dev, size,
+			if (ops->alloc_coherent)
+				return ops->alloc_coherent(dev, size,
 							   dma_handle, gfp);
 			return NULL;
 		}
@@ -459,14 +341,14 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
 		}
 	}
 
-	if (dma_ops->alloc_coherent) {
+	if (ops->alloc_coherent) {
 		free_pages((unsigned long)memory, get_order(size));
 		gfp &= ~(GFP_DMA|GFP_DMA32);
-		return dma_ops->alloc_coherent(dev, size, dma_handle, gfp);
+		return ops->alloc_coherent(dev, size, dma_handle, gfp);
 	}
 
-	if (dma_ops->map_simple) {
-		*dma_handle = dma_ops->map_simple(dev, virt_to_phys(memory),
+	if (ops->map_simple) {
+		*dma_handle = ops->map_simple(dev, virt_to_phys(memory),
 					      size,
 					      PCI_DMA_BIDIRECTIONAL);
 		if (*dma_handle != bad_dma_address)
@@ -488,29 +370,27 @@ EXPORT_SYMBOL(dma_alloc_coherent);
 void dma_free_coherent(struct device *dev, size_t size,
 			 void *vaddr, dma_addr_t bus)
 {
+	struct dma_mapping_ops *ops = get_dma_ops(dev);
+
 	int order = get_order(size);
 	WARN_ON(irqs_disabled());	/* for portability */
-	if (dma_release_coherent(dev, order, vaddr))
+	if (dma_release_from_coherent(dev, order, vaddr))
 		return;
-	if (dma_ops->unmap_single)
-		dma_ops->unmap_single(dev, bus, size, 0);
+	if (ops->unmap_single)
+		ops->unmap_single(dev, bus, size, 0);
 	free_pages((unsigned long)vaddr, order);
 }
 EXPORT_SYMBOL(dma_free_coherent);
 
 static int __init pci_iommu_init(void)
 {
-#ifdef CONFIG_CALGARY_IOMMU
 	calgary_iommu_init();
-#endif
 
 	intel_iommu_init();
 
 	amd_iommu_init();
 
-#ifdef CONFIG_GART_IOMMU
 	gart_iommu_init();
-#endif
 
 	no_iommu_init();
 	return 0;
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index c3fe78406d18..49285f8fd4d5 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -32,6 +32,7 @@
 #include <asm/mtrr.h>
 #include <asm/pgtable.h>
 #include <asm/proto.h>
+#include <asm/iommu.h>
 #include <asm/gart.h>
 #include <asm/cacheflush.h>
 #include <asm/swiotlb.h>
@@ -66,9 +67,6 @@ static u32 gart_unmapped_entry;
 	(((x) & 0xfffff000) | (((x) >> 32) << 4) | GPTE_VALID | GPTE_COHERENT)
 #define GPTE_DECODE(x) (((x) & 0xfffff000) | (((u64)(x) & 0xff0) << 28))
 
-#define to_pages(addr, size) \
-	(round_up(((addr) & ~PAGE_MASK) + (size), PAGE_SIZE) >> PAGE_SHIFT)
-
 #define EMERGENCY_PAGES 32 /* = 128KB */
 
 #ifdef CONFIG_AGP
@@ -197,9 +195,7 @@ static void iommu_full(struct device *dev, size_t size, int dir)
 	 * out. Hopefully no network devices use single mappings that big.
 	 */
 
-	printk(KERN_ERR
-		"PCI-DMA: Out of IOMMU space for %lu bytes at device %s\n",
-		size, dev->bus_id);
+	dev_err(dev, "PCI-DMA: Out of IOMMU space for %lu bytes\n", size);
 
 	if (size > PAGE_SIZE*EMERGENCY_PAGES) {
 		if (dir == PCI_DMA_FROMDEVICE || dir == PCI_DMA_BIDIRECTIONAL)
@@ -242,7 +238,7 @@ nonforced_iommu(struct device *dev, unsigned long addr, size_t size)
 static dma_addr_t dma_map_area(struct device *dev, dma_addr_t phys_mem,
 				size_t size, int dir)
 {
-	unsigned long npages = to_pages(phys_mem, size);
+	unsigned long npages = iommu_num_pages(phys_mem, size);
 	unsigned long iommu_page = alloc_iommu(dev, npages);
 	int i;
 
@@ -305,7 +301,7 @@ static void gart_unmap_single(struct device *dev, dma_addr_t dma_addr,
 		return;
 
 	iommu_page = (dma_addr - iommu_bus_base)>>PAGE_SHIFT;
-	npages = to_pages(dma_addr, size);
+	npages = iommu_num_pages(dma_addr, size);
 	for (i = 0; i < npages; i++) {
 		iommu_gatt_base[iommu_page + i] = gart_unmapped_entry;
 		CLEAR_LEAK(iommu_page + i);
@@ -388,7 +384,7 @@ static int __dma_map_cont(struct device *dev, struct scatterlist *start,
 		}
 
 		addr = phys_addr;
-		pages = to_pages(s->offset, s->length);
+		pages = iommu_num_pages(s->offset, s->length);
 		while (pages--) {
 			iommu_gatt_base[iommu_page] = GPTE_ENCODE(addr);
 			SET_LEAK(iommu_page);
@@ -471,7 +467,7 @@ gart_map_sg(struct device *dev, struct scatterlist *sg, int nents, int dir)
 
 		seg_size += s->length;
 		need = nextneed;
-		pages += to_pages(s->offset, s->length);
+		pages += iommu_num_pages(s->offset, s->length);
 		ps = s;
 	}
 	if (dma_map_cont(dev, start_sg, i - start, sgmap, pages, need) < 0)
@@ -693,8 +689,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info)
 
 extern int agp_amd64_init(void);
 
-static const struct dma_mapping_ops gart_dma_ops = {
-	.mapping_error			= NULL,
+static struct dma_mapping_ops gart_dma_ops = {
 	.map_single			= gart_map_single,
 	.map_simple			= gart_map_simple,
 	.unmap_single			= gart_unmap_single,
diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c
index aec43d56f49c..3f91f71cdc3e 100644
--- a/arch/x86/kernel/pci-nommu.c
+++ b/arch/x86/kernel/pci-nommu.c
@@ -7,7 +7,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
 
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/processor.h>
 #include <asm/dma.h>
 
@@ -72,21 +72,9 @@ static int nommu_map_sg(struct device *hwdev, struct scatterlist *sg,
 	return nents;
 }
 
-/* Make sure we keep the same behaviour */
-static int nommu_mapping_error(dma_addr_t dma_addr)
-{
-#ifdef CONFIG_X86_32
-	return 0;
-#else
-	return (dma_addr == bad_dma_address);
-#endif
-}
-
-
-const struct dma_mapping_ops nommu_dma_ops = {
+struct dma_mapping_ops nommu_dma_ops = {
 	.map_single = nommu_map_single,
 	.map_sg = nommu_map_sg,
-	.mapping_error = nommu_mapping_error,
 	.is_phys = 1,
 };
 
diff --git a/arch/x86/kernel/pci-swiotlb_64.c b/arch/x86/kernel/pci-swiotlb_64.c
index 82299cd1d04d..c4ce0332759e 100644
--- a/arch/x86/kernel/pci-swiotlb_64.c
+++ b/arch/x86/kernel/pci-swiotlb_64.c
@@ -5,7 +5,7 @@
 #include <linux/module.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/swiotlb.h>
 #include <asm/dma.h>
 
@@ -18,7 +18,7 @@ swiotlb_map_single_phys(struct device *hwdev, phys_addr_t paddr, size_t size,
 	return swiotlb_map_single(hwdev, phys_to_virt(paddr), size, direction);
 }
 
-const struct dma_mapping_ops swiotlb_dma_ops = {
+struct dma_mapping_ops swiotlb_dma_ops = {
 	.mapping_error = swiotlb_dma_mapping_error,
 	.alloc_coherent = swiotlb_alloc_coherent,
 	.free_coherent = swiotlb_free_coherent,
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 4061d63aabe7..7fc4d5b0a6a0 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -7,8 +7,15 @@
 #include <linux/module.h>
 #include <linux/pm.h>
 #include <linux/clockchips.h>
+#include <asm/system.h>
+
+unsigned long idle_halt;
+EXPORT_SYMBOL(idle_halt);
+unsigned long idle_nomwait;
+EXPORT_SYMBOL(idle_nomwait);
 
 struct kmem_cache *task_xstate_cachep;
+static int force_mwait __cpuinitdata;
 
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
@@ -132,7 +139,7 @@ void cpu_idle_wait(void)
 {
 	smp_mb();
 	/* kick all the CPUs so that they exit out of pm_idle */
-	smp_call_function(do_nothing, NULL, 0, 1);
+	smp_call_function(do_nothing, NULL, 1);
 }
 EXPORT_SYMBOL_GPL(cpu_idle_wait);
 
@@ -193,6 +200,7 @@ static void poll_idle(void)
  *
  * idle=mwait overrides this decision and forces the usage of mwait.
  */
+static int __cpuinitdata force_mwait;
 
 #define MWAIT_INFO			0x05
 #define MWAIT_ECX_EXTENDED_INFO		0x01
@@ -320,12 +328,35 @@ void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
 
 static int __init idle_setup(char *str)
 {
+	if (!str)
+		return -EINVAL;
+
 	if (!strcmp(str, "poll")) {
 		printk("using polling idle threads.\n");
 		pm_idle = poll_idle;
 	} else if (!strcmp(str, "mwait"))
 		force_mwait = 1;
-	else
+	else if (!strcmp(str, "halt")) {
+		/*
+		 * When the boot option of idle=halt is added, halt is
+		 * forced to be used for CPU idle. In such case CPU C2/C3
+		 * won't be used again.
+		 * To continue to load the CPU idle driver, don't touch
+		 * the boot_option_idle_override.
+		 */
+		pm_idle = default_idle;
+		idle_halt = 1;
+		return 0;
+	} else if (!strcmp(str, "nomwait")) {
+		/*
+		 * If the boot option of "idle=nomwait" is added,
+		 * it means that mwait will be disabled for CPU C2/C3
+		 * states. In such case it won't touch the variable
+		 * of boot_option_idle_override.
+		 */
+		idle_nomwait = 1;
+		return 0;
+	} else
 		return -1;
 
 	boot_option_idle_override = 1;
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 0c3927accb00..53bc653ed5ca 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -128,7 +128,7 @@ void cpu_idle(void)
 
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched()) {
 
 			check_pgt_cache();
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index a8e53626ac9a..3fb62a7d9a16 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -120,7 +120,7 @@ void cpu_idle(void)
 	current_thread_info()->status |= TS_POLLING;
 	/* endless idle loop with no priority at all */
 	while (1) {
-		tick_nohz_stop_sched_tick();
+		tick_nohz_stop_sched_tick(1);
 		while (!need_resched()) {
 
 			rmb();
@@ -537,8 +537,8 @@ static inline void __switch_to_xtra(struct task_struct *prev_p,
 struct task_struct *
 __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 {
-	struct thread_struct *prev = &prev_p->thread,
-				 *next = &next_p->thread;
+	struct thread_struct *prev = &prev_p->thread;
+	struct thread_struct *next = &next_p->thread;
 	int cpu = smp_processor_id();
 	struct tss_struct *tss = &per_cpu(init_tss, cpu);
 	unsigned fsindex, gsindex;
@@ -586,35 +586,34 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	/* 
 	 * Switch FS and GS.
+	 *
+	 * Segment register != 0 always requires a reload.  Also
+	 * reload when it has changed.  When prev process used 64bit
+	 * base always reload to avoid an information leak.
 	 */
-	{ 
-		/* segment register != 0 always requires a reload. 
-		   also reload when it has changed. 
-		   when prev process used 64bit base always reload
-		   to avoid an information leak. */
-		if (unlikely(fsindex | next->fsindex | prev->fs)) {
-			loadsegment(fs, next->fsindex);
-			/* check if the user used a selector != 0
-	                 * if yes clear 64bit base, since overloaded base
-                         * is always mapped to the Null selector
-                         */
-			if (fsindex)
+	if (unlikely(fsindex | next->fsindex | prev->fs)) {
+		loadsegment(fs, next->fsindex);
+		/* 
+		 * Check if the user used a selector != 0; if yes
+		 *  clear 64bit base, since overloaded base is always
+		 *  mapped to the Null selector
+		 */
+		if (fsindex)
 			prev->fs = 0;				
-		}
-		/* when next process has a 64bit base use it */
-		if (next->fs) 
-			wrmsrl(MSR_FS_BASE, next->fs); 
-		prev->fsindex = fsindex;
-
-		if (unlikely(gsindex | next->gsindex | prev->gs)) {
-			load_gs_index(next->gsindex);
-			if (gsindex)
+	}
+	/* when next process has a 64bit base use it */
+	if (next->fs)
+		wrmsrl(MSR_FS_BASE, next->fs);
+	prev->fsindex = fsindex;
+
+	if (unlikely(gsindex | next->gsindex | prev->gs)) {
+		load_gs_index(next->gsindex);
+		if (gsindex)
 			prev->gs = 0;				
-		}
-		if (next->gs)
-			wrmsrl(MSR_KERNEL_GS_BASE, next->gs); 
-		prev->gsindex = gsindex;
 	}
+	if (next->gs)
+		wrmsrl(MSR_KERNEL_GS_BASE, next->gs);
+	prev->gsindex = gsindex;
 
 	/* Must be after DS reload */
 	unlazy_fpu(prev_p);
@@ -627,7 +626,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	write_pda(pcurrent, next_p); 
 
 	write_pda(kernelstack,
-	(unsigned long)task_stack_page(next_p) + THREAD_SIZE - PDA_STACKOFFSET);
+		  (unsigned long)task_stack_page(next_p) +
+		  THREAD_SIZE - PDA_STACKOFFSET);
 #ifdef CONFIG_CC_STACKPROTECTOR
 	write_pda(stack_canary, next_p->stack_canary);
 	/*
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 77040b6070e1..e37dccce85db 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -1357,8 +1357,6 @@ const struct user_regset_view *task_user_regset_view(struct task_struct *task)
 #endif
 }
 
-#ifdef CONFIG_X86_32
-
 void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
 {
 	struct siginfo info;
@@ -1377,89 +1375,10 @@ void send_sigtrap(struct task_struct *tsk, struct pt_regs *regs, int error_code)
 	force_sig_info(SIGTRAP, &info, tsk);
 }
 
-/* notification of system call entry/exit
- * - triggered by current->work.syscall_trace
- */
-int do_syscall_trace(struct pt_regs *regs, int entryexit)
-{
-	int is_sysemu = test_thread_flag(TIF_SYSCALL_EMU);
-	/*
-	 * With TIF_SYSCALL_EMU set we want to ignore TIF_SINGLESTEP for syscall
-	 * interception
-	 */
-	int is_singlestep = !is_sysemu && test_thread_flag(TIF_SINGLESTEP);
-	int ret = 0;
-
-	/* do the secure computing check first */
-	if (!entryexit)
-		secure_computing(regs->orig_ax);
-
-	if (unlikely(current->audit_context)) {
-		if (entryexit)
-			audit_syscall_exit(AUDITSC_RESULT(regs->ax),
-						regs->ax);
-		/* Debug traps, when using PTRACE_SINGLESTEP, must be sent only
-		 * on the syscall exit path. Normally, when TIF_SYSCALL_AUDIT is
-		 * not used, entry.S will call us only on syscall exit, not
-		 * entry; so when TIF_SYSCALL_AUDIT is used we must avoid
-		 * calling send_sigtrap() on syscall entry.
-		 *
-		 * Note that when PTRACE_SYSEMU_SINGLESTEP is used,
-		 * is_singlestep is false, despite his name, so we will still do
-		 * the correct thing.
-		 */
-		else if (is_singlestep)
-			goto out;
-	}
-
-	if (!(current->ptrace & PT_PTRACED))
-		goto out;
-
-	/* If a process stops on the 1st tracepoint with SYSCALL_TRACE
-	 * and then is resumed with SYSEMU_SINGLESTEP, it will come in
-	 * here. We have to check this and return */
-	if (is_sysemu && entryexit)
-		return 0;
-
-	/* Fake a debug trap */
-	if (is_singlestep)
-		send_sigtrap(current, regs, 0);
-
- 	if (!test_thread_flag(TIF_SYSCALL_TRACE) && !is_sysemu)
-		goto out;
-
-	/* the 0x80 provides a way for the tracing parent to distinguish
-	   between a syscall stop and SIGTRAP delivery */
-	/* Note that the debugger could change the result of test_thread_flag!*/
-	ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80:0));
-
-	/*
-	 * this isn't the same as continuing with a signal, but it will do
-	 * for normal use.  strace only continues with a signal if the
-	 * stopping signal is not SIGTRAP.  -brl
-	 */
-	if (current->exit_code) {
-		send_sig(current->exit_code, current, 1);
-		current->exit_code = 0;
-	}
-	ret = is_sysemu;
-out:
-	if (unlikely(current->audit_context) && !entryexit)
-		audit_syscall_entry(AUDIT_ARCH_I386, regs->orig_ax,
-				    regs->bx, regs->cx, regs->dx, regs->si);
-	if (ret == 0)
-		return 0;
-
-	regs->orig_ax = -1; /* force skip of syscall restarting */
-	if (unlikely(current->audit_context))
-		audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax);
-	return 1;
-}
-
-#else  /* CONFIG_X86_64 */
-
 static void syscall_trace(struct pt_regs *regs)
 {
+	if (!(current->ptrace & PT_PTRACED))
+		return;
 
 #if 0
 	printk("trace %s ip %lx sp %lx ax %d origrax %d caller %lx tiflags %x ptrace %x\n",
@@ -1481,39 +1400,81 @@ static void syscall_trace(struct pt_regs *regs)
 	}
 }
 
-asmlinkage void syscall_trace_enter(struct pt_regs *regs)
+#ifdef CONFIG_X86_32
+# define IS_IA32	1
+#elif defined CONFIG_IA32_EMULATION
+# define IS_IA32	test_thread_flag(TIF_IA32)
+#else
+# define IS_IA32	0
+#endif
+
+/*
+ * We must return the syscall number to actually look up in the table.
+ * This can be -1L to skip running any syscall at all.
+ */
+asmregparm long syscall_trace_enter(struct pt_regs *regs)
 {
+	long ret = 0;
+
+	/*
+	 * If we stepped into a sysenter/syscall insn, it trapped in
+	 * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP.
+	 * If user-mode had set TF itself, then it's still clear from
+	 * do_debug() and we need to set it again to restore the user
+	 * state.  If we entered on the slow path, TF was already set.
+	 */
+	if (test_thread_flag(TIF_SINGLESTEP))
+		regs->flags |= X86_EFLAGS_TF;
+
 	/* do the secure computing check first */
 	secure_computing(regs->orig_ax);
 
-	if (test_thread_flag(TIF_SYSCALL_TRACE)
-	    && (current->ptrace & PT_PTRACED))
+	if (unlikely(test_thread_flag(TIF_SYSCALL_EMU)))
+		ret = -1L;
+
+	if (ret || test_thread_flag(TIF_SYSCALL_TRACE))
 		syscall_trace(regs);
 
 	if (unlikely(current->audit_context)) {
-		if (test_thread_flag(TIF_IA32)) {
+		if (IS_IA32)
 			audit_syscall_entry(AUDIT_ARCH_I386,
 					    regs->orig_ax,
 					    regs->bx, regs->cx,
 					    regs->dx, regs->si);
-		} else {
+#ifdef CONFIG_X86_64
+		else
 			audit_syscall_entry(AUDIT_ARCH_X86_64,
 					    regs->orig_ax,
 					    regs->di, regs->si,
 					    regs->dx, regs->r10);
-		}
+#endif
 	}
+
+	return ret ?: regs->orig_ax;
 }
 
-asmlinkage void syscall_trace_leave(struct pt_regs *regs)
+asmregparm void syscall_trace_leave(struct pt_regs *regs)
 {
 	if (unlikely(current->audit_context))
 		audit_syscall_exit(AUDITSC_RESULT(regs->ax), regs->ax);
 
-	if ((test_thread_flag(TIF_SYSCALL_TRACE)
-	     || test_thread_flag(TIF_SINGLESTEP))
-	    && (current->ptrace & PT_PTRACED))
+	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		syscall_trace(regs);
-}
 
-#endif	/* CONFIG_X86_32 */
+	/*
+	 * If TIF_SYSCALL_EMU is set, we only get here because of
+	 * TIF_SINGLESTEP (i.e. this is PTRACE_SYSEMU_SINGLESTEP).
+	 * We already reported this syscall instruction in
+	 * syscall_trace_enter(), so don't do any more now.
+	 */
+	if (unlikely(test_thread_flag(TIF_SYSCALL_EMU)))
+		return;
+
+	/*
+	 * If we are single-stepping, synthesize a trap to follow the
+	 * system call instruction.
+	 */
+	if (test_thread_flag(TIF_SINGLESTEP) &&
+	    (current->ptrace & PT_PTRACED))
+		send_sigtrap(current, regs, 0);
+}
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index f8a62160e151..724adfc63cb9 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -177,6 +177,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2400"),
 		},
 	},
+	{	/* Handle problems with rebooting on Dell T5400's */
+		.callback = set_bios_reboot,
+		.ident = "Dell Precision T5400",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Precision WorkStation T5400"),
+		},
+	},
 	{	/* Handle problems with rebooting on HP laptops */
 		.callback = set_bios_reboot,
 		.ident = "HP Compaq Laptop",
@@ -403,10 +411,9 @@ void native_machine_shutdown(void)
 {
 	/* Stop the cpus and apics */
 #ifdef CONFIG_SMP
-	int reboot_cpu_id;
 
 	/* The boot cpu is always logical cpu 0 */
-	reboot_cpu_id = 0;
+	int reboot_cpu_id = 0;
 
 #ifdef CONFIG_X86_32
 	/* See if there has been given a command line override */
diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S
index c30fe25d470d..703310a99023 100644
--- a/arch/x86/kernel/relocate_kernel_32.S
+++ b/arch/x86/kernel/relocate_kernel_32.S
@@ -20,11 +20,44 @@
 #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
 #define PAE_PGD_ATTR (_PAGE_PRESENT)
 
+/* control_page + PAGE_SIZE/2 ~ control_page + PAGE_SIZE * 3/4 are
+ * used to save some data for jumping back
+ */
+#define DATA(offset)		(PAGE_SIZE/2+(offset))
+
+/* Minimal CPU state */
+#define ESP			DATA(0x0)
+#define CR0			DATA(0x4)
+#define CR3			DATA(0x8)
+#define CR4			DATA(0xc)
+
+/* other data */
+#define CP_VA_CONTROL_PAGE	DATA(0x10)
+#define CP_PA_PGD		DATA(0x14)
+#define CP_PA_SWAP_PAGE		DATA(0x18)
+#define CP_PA_BACKUP_PAGES_MAP	DATA(0x1c)
+
 	.text
 	.align PAGE_SIZE
 	.globl relocate_kernel
 relocate_kernel:
-	movl	8(%esp), %ebp /* list of pages */
+	/* Save the CPU context, used for jumping back */
+
+	pushl	%ebx
+	pushl	%esi
+	pushl	%edi
+	pushl	%ebp
+	pushf
+
+	movl	20+8(%esp), %ebp /* list of pages */
+	movl	PTR(VA_CONTROL_PAGE)(%ebp), %edi
+	movl	%esp, ESP(%edi)
+	movl	%cr0, %eax
+	movl	%eax, CR0(%edi)
+	movl	%cr3, %eax
+	movl	%eax, CR3(%edi)
+	movl	%cr4, %eax
+	movl	%eax, CR4(%edi)
 
 #ifdef CONFIG_X86_PAE
 	/* map the control page at its virtual address */
@@ -138,15 +171,25 @@ relocate_kernel:
 
 relocate_new_kernel:
 	/* read the arguments and say goodbye to the stack */
-	movl  4(%esp), %ebx /* page_list */
-	movl  8(%esp), %ebp /* list of pages */
-	movl  12(%esp), %edx /* start address */
-	movl  16(%esp), %ecx /* cpu_has_pae */
+	movl  20+4(%esp), %ebx /* page_list */
+	movl  20+8(%esp), %ebp /* list of pages */
+	movl  20+12(%esp), %edx /* start address */
+	movl  20+16(%esp), %ecx /* cpu_has_pae */
+	movl  20+20(%esp), %esi /* preserve_context */
 
 	/* zero out flags, and disable interrupts */
 	pushl $0
 	popfl
 
+	/* save some information for jumping back */
+	movl	PTR(VA_CONTROL_PAGE)(%ebp), %edi
+	movl	%edi, CP_VA_CONTROL_PAGE(%edi)
+	movl	PTR(PA_PGD)(%ebp), %eax
+	movl	%eax, CP_PA_PGD(%edi)
+	movl	PTR(PA_SWAP_PAGE)(%ebp), %eax
+	movl	%eax, CP_PA_SWAP_PAGE(%edi)
+	movl	%ebx, CP_PA_BACKUP_PAGES_MAP(%edi)
+
 	/* get physical address of control page now */
 	/* this is impossible after page table switch */
 	movl	PTR(PA_CONTROL_PAGE)(%ebp), %edi
@@ -197,8 +240,90 @@ identity_mapped:
 	xorl	%eax, %eax
 	movl	%eax, %cr3
 
+	movl	CP_PA_SWAP_PAGE(%edi), %eax
+	pushl	%eax
+	pushl	%ebx
+	call	swap_pages
+	addl	$8, %esp
+
+	/* To be certain of avoiding problems with self-modifying code
+	 * I need to execute a serializing instruction here.
+	 * So I flush the TLB, it's handy, and not processor dependent.
+	 */
+	xorl	%eax, %eax
+	movl	%eax, %cr3
+
+	/* set all of the registers to known values */
+	/* leave %esp alone */
+
+	testl	%esi, %esi
+	jnz 1f
+	xorl	%edi, %edi
+	xorl	%eax, %eax
+	xorl	%ebx, %ebx
+	xorl    %ecx, %ecx
+	xorl    %edx, %edx
+	xorl    %esi, %esi
+	xorl    %ebp, %ebp
+	ret
+1:
+	popl	%edx
+	movl	CP_PA_SWAP_PAGE(%edi), %esp
+	addl	$PAGE_SIZE, %esp
+2:
+	call	*%edx
+
+	/* get the re-entry point of the peer system */
+	movl	0(%esp), %ebp
+	call	1f
+1:
+	popl	%ebx
+	subl	$(1b - relocate_kernel), %ebx
+	movl	CP_VA_CONTROL_PAGE(%ebx), %edi
+	lea	PAGE_SIZE(%ebx), %esp
+	movl	CP_PA_SWAP_PAGE(%ebx), %eax
+	movl	CP_PA_BACKUP_PAGES_MAP(%ebx), %edx
+	pushl	%eax
+	pushl	%edx
+	call	swap_pages
+	addl	$8, %esp
+	movl	CP_PA_PGD(%ebx), %eax
+	movl	%eax, %cr3
+	movl	%cr0, %eax
+	orl	$(1<<31), %eax
+	movl	%eax, %cr0
+	lea	PAGE_SIZE(%edi), %esp
+	movl	%edi, %eax
+	addl	$(virtual_mapped - relocate_kernel), %eax
+	pushl	%eax
+	ret
+
+virtual_mapped:
+	movl	CR4(%edi), %eax
+	movl	%eax, %cr4
+	movl	CR3(%edi), %eax
+	movl	%eax, %cr3
+	movl	CR0(%edi), %eax
+	movl	%eax, %cr0
+	movl	ESP(%edi), %esp
+	movl	%ebp, %eax
+
+	popf
+	popl	%ebp
+	popl	%edi
+	popl	%esi
+	popl	%ebx
+	ret
+
 	/* Do the copies */
-	movl	%ebx, %ecx
+swap_pages:
+	movl	8(%esp), %edx
+	movl	4(%esp), %ecx
+	pushl	%ebp
+	pushl	%ebx
+	pushl	%edi
+	pushl	%esi
+	movl	%ecx, %ebx
 	jmp	1f
 
 0:	/* top, read another word from the indirection page */
@@ -226,27 +351,28 @@ identity_mapped:
 	movl    %ecx,   %esi /* For every source page do a copy */
 	andl    $0xfffff000, %esi
 
+	movl	%edi, %eax
+	movl	%esi, %ebp
+
+	movl	%edx, %edi
 	movl    $1024, %ecx
 	rep ; movsl
-	jmp     0b
 
-3:
-
-	/* To be certain of avoiding problems with self-modifying code
-	 * I need to execute a serializing instruction here.
-	 * So I flush the TLB, it's handy, and not processor dependent.
-	 */
-	xorl	%eax, %eax
-	movl	%eax, %cr3
+	movl	%ebp, %edi
+	movl	%eax, %esi
+	movl	$1024, %ecx
+	rep ; movsl
 
-	/* set all of the registers to known values */
-	/* leave %esp alone */
+	movl	%eax, %edi
+	movl	%edx, %esi
+	movl	$1024, %ecx
+	rep ; movsl
 
-	xorl	%eax, %eax
-	xorl	%ebx, %ebx
-	xorl    %ecx, %ecx
-	xorl    %edx, %edx
-	xorl    %esi, %esi
-	xorl    %edi, %edi
-	xorl    %ebp, %ebp
+	lea	PAGE_SIZE(%ebp), %esi
+	jmp     0b
+3:
+	popl	%esi
+	popl	%edi
+	popl	%ebx
+	popl	%ebp
 	ret
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 36c540d4ac4b..2d888586385d 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -57,12 +57,8 @@
 #include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/delay.h>
-#include <linux/highmem.h>
 
 #include <linux/kallsyms.h>
-#include <linux/edd.h>
-#include <linux/iscsi_ibft.h>
-#include <linux/kexec.h>
 #include <linux/cpufreq.h>
 #include <linux/dma-mapping.h>
 #include <linux/ctype.h>
@@ -96,7 +92,7 @@
 #include <asm/smp.h>
 #include <asm/desc.h>
 #include <asm/dma.h>
-#include <asm/gart.h>
+#include <asm/iommu.h>
 #include <asm/mmu_context.h>
 #include <asm/proto.h>
 
@@ -104,7 +100,6 @@
 #include <asm/paravirt.h>
 
 #include <asm/percpu.h>
-#include <asm/sections.h>
 #include <asm/topology.h>
 #include <asm/apicdef.h>
 #ifdef CONFIG_X86_64
@@ -579,6 +574,10 @@ static int __init setup_elfcorehdr(char *arg)
 early_param("elfcorehdr", setup_elfcorehdr);
 #endif
 
+static struct x86_quirks default_x86_quirks __initdata;
+
+struct x86_quirks *x86_quirks __initdata = &default_x86_quirks;
+
 /*
  * Determine if we were loaded by an EFI loader.  If so, then we have also been
  * passed the efi memmap, systab, etc., so we should use these data structures
@@ -598,11 +597,11 @@ void __init setup_arch(char **cmdline_p)
 	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
 	visws_early_detect();
 	pre_setup_arch_hook();
-	early_cpu_init();
 #else
 	printk(KERN_INFO "Command line: %s\n", boot_command_line);
 #endif
 
+	early_cpu_init();
 	early_ioremap_init();
 
 	ROOT_DEV = old_decode_dev(boot_params.hdr.root_dev);
@@ -666,9 +665,6 @@ void __init setup_arch(char **cmdline_p)
 	bss_resource.start = virt_to_phys(&__bss_start);
 	bss_resource.end = virt_to_phys(&__bss_stop)-1;
 
-#ifdef CONFIG_X86_64
-	early_cpu_init();
-#endif
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 
@@ -681,9 +677,14 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_X86_LOCAL_APIC
 		disable_apic = 1;
 #endif
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
+		setup_clear_cpu_cap(X86_FEATURE_APIC);
 	}
 
+#ifdef CONFIG_PCI
+	if (pci_early_dump_regs)
+		early_dump_pci_devices();
+#endif
+
 	finish_e820_parsing();
 
 #ifdef CONFIG_X86_32
@@ -787,10 +788,6 @@ void __init setup_arch(char **cmdline_p)
 
 	initmem_init(0, max_pfn);
 
-#ifdef CONFIG_X86_64
-	dma32_reserve_bootmem();
-#endif
-
 #ifdef CONFIG_ACPI_SLEEP
 	/*
 	 * Reserve low memory region for sleep support.
@@ -805,6 +802,15 @@ void __init setup_arch(char **cmdline_p)
 #endif
 	reserve_crashkernel();
 
+#ifdef CONFIG_X86_64
+	/*
+	 * dma32_reserve_bootmem() allocates bootmem which may conflict
+	 * with the crashkernel command line, so do that after
+	 * reserve_crashkernel()
+	 */
+	dma32_reserve_bootmem();
+#endif
+
 	reserve_ibft_region();
 
 #ifdef CONFIG_KVM_CLOCK
@@ -819,7 +825,10 @@ void __init setup_arch(char **cmdline_p)
 	vmi_init();
 #endif
 
+	paravirt_pagetable_setup_start(swapper_pg_dir);
 	paging_init();
+	paravirt_pagetable_setup_done(swapper_pg_dir);
+	paravirt_post_allocator_init();
 
 #ifdef CONFIG_X86_64
 	map_vsyscall();
@@ -849,14 +858,6 @@ void __init setup_arch(char **cmdline_p)
 	init_cpu_to_node();
 #endif
 
-#ifdef CONFIG_X86_NUMAQ
-	/*
-	 * need to check online nodes num, call it
-	 * here before time_init/tsc_init
-	 */
-	numaq_tsc_disable();
-#endif
-
 	init_apic_mappings();
 	ioapic_init_mappings();
 
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index cac68430d31f..76e305e064f9 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -80,24 +80,6 @@ static void __init setup_per_cpu_maps(void)
 #endif
 }
 
-#ifdef CONFIG_HAVE_CPUMASK_OF_CPU_MAP
-cpumask_t *cpumask_of_cpu_map __read_mostly;
-EXPORT_SYMBOL(cpumask_of_cpu_map);
-
-/* requires nr_cpu_ids to be initialized */
-static void __init setup_cpumask_of_cpu(void)
-{
-	int i;
-
-	/* alloc_bootmem zeroes memory */
-	cpumask_of_cpu_map = alloc_bootmem_low(sizeof(cpumask_t) * nr_cpu_ids);
-	for (i = 0; i < nr_cpu_ids; i++)
-		cpu_set(i, cpumask_of_cpu_map[i]);
-}
-#else
-static inline void setup_cpumask_of_cpu(void) { }
-#endif
-
 #ifdef CONFIG_X86_32
 /*
  * Great future not-so-futuristic plan: make i386 and x86_64 do it
@@ -197,9 +179,6 @@ void __init setup_per_cpu_areas(void)
 
 	/* Setup node to cpumask map */
 	setup_node_to_cpumask_map();
-
-	/* Setup cpumask_of_cpu map */
-	setup_cpumask_of_cpu();
 }
 
 #endif
@@ -227,8 +206,8 @@ static void __init setup_node_to_cpumask_map(void)
 	/* allocate the map */
 	map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t));
 
-	Dprintk(KERN_DEBUG "Node to cpumask map at %p for %d nodes\n",
-		map, nr_node_ids);
+	pr_debug(KERN_DEBUG "Node to cpumask map at %p for %d nodes\n",
+		 map, nr_node_ids);
 
 	/* node_to_cpumask() will now work */
 	node_to_cpumask_map = map;
@@ -248,7 +227,7 @@ void __cpuinit numa_set_node(int cpu, int node)
 		per_cpu(x86_cpu_to_node_map, cpu) = node;
 
 	else
-		Dprintk(KERN_INFO "Setting node for non-present cpu %d\n", cpu);
+		pr_debug("Setting node for non-present cpu %d\n", cpu);
 }
 
 void __cpuinit numa_clear_node(int cpu)
diff --git a/arch/x86/kernel/signal_32.c b/arch/x86/kernel/signal_32.c
index d92373630963..6fb5bcdd8933 100644
--- a/arch/x86/kernel/signal_32.c
+++ b/arch/x86/kernel/signal_32.c
@@ -212,7 +212,7 @@ asmlinkage unsigned long sys_sigreturn(unsigned long __unused)
 
 badframe:
 	if (show_unhandled_signals && printk_ratelimit()) {
-		printk(KERN_INFO "%s%s[%d] bad frame in sigreturn frame:"
+		printk("%s%s[%d] bad frame in sigreturn frame:"
 			"%p ip:%lx sp:%lx oeax:%lx",
 		    task_pid_nr(current) > 1 ? KERN_INFO : KERN_EMERG,
 		    current->comm, task_pid_nr(current), frame, regs->ip,
@@ -657,18 +657,9 @@ static void do_signal(struct pt_regs *regs)
 void
 do_notify_resume(struct pt_regs *regs, void *unused, __u32 thread_info_flags)
 {
-	/* Pending single-step? */
-	if (thread_info_flags & _TIF_SINGLESTEP) {
-		regs->flags |= X86_EFLAGS_TF;
-		clear_thread_flag(TIF_SINGLESTEP);
-	}
-
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs);
 
-	if (thread_info_flags & _TIF_HRTICK_RESCHED)
-		hrtick_resched();
-
 	clear_thread_flag(TIF_IRET);
 }
diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c
index e53b267662e7..b45ef8ddd651 100644
--- a/arch/x86/kernel/signal_64.c
+++ b/arch/x86/kernel/signal_64.c
@@ -53,6 +53,59 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
 	return do_sigaltstack(uss, uoss, regs->sp);
 }
 
+/*
+ * Signal frame handlers.
+ */
+
+static inline int save_i387(struct _fpstate __user *buf)
+{
+	struct task_struct *tsk = current;
+	int err = 0;
+
+	BUILD_BUG_ON(sizeof(struct user_i387_struct) !=
+			sizeof(tsk->thread.xstate->fxsave));
+
+	if ((unsigned long)buf % 16)
+		printk("save_i387: bad fpstate %p\n", buf);
+
+	if (!used_math())
+		return 0;
+	clear_used_math(); /* trigger finit */
+	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+		err = save_i387_checking((struct i387_fxsave_struct __user *)
+					 buf);
+		if (err)
+			return err;
+		task_thread_info(tsk)->status &= ~TS_USEDFPU;
+		stts();
+	} else {
+		if (__copy_to_user(buf, &tsk->thread.xstate->fxsave,
+				   sizeof(struct i387_fxsave_struct)))
+			return -1;
+	}
+	return 1;
+}
+
+/*
+ * This restores directly out of user space. Exceptions are handled.
+ */
+static inline int restore_i387(struct _fpstate __user *buf)
+{
+	struct task_struct *tsk = current;
+	int err;
+
+	if (!used_math()) {
+		err = init_fpu(tsk);
+		if (err)
+			return err;
+	}
+
+	if (!(task_thread_info(current)->status & TS_USEDFPU)) {
+		clts();
+		task_thread_info(current)->status |= TS_USEDFPU;
+	}
+	return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
+}
 
 /*
  * Do a signal return; undo the signal stack.
@@ -487,12 +540,6 @@ static void do_signal(struct pt_regs *regs)
 void do_notify_resume(struct pt_regs *regs, void *unused,
 		      __u32 thread_info_flags)
 {
-	/* Pending single-step? */
-	if (thread_info_flags & _TIF_SINGLESTEP) {
-		regs->flags |= X86_EFLAGS_TF;
-		clear_thread_flag(TIF_SINGLESTEP);
-	}
-
 #ifdef CONFIG_X86_MCE
 	/* notify userspace of pending MCEs */
 	if (thread_info_flags & _TIF_MCE_NOTIFY)
@@ -502,9 +549,6 @@ void do_notify_resume(struct pt_regs *regs, void *unused,
 	/* deal with pending signal delivery */
 	if (thread_info_flags & _TIF_SIGPENDING)
 		do_signal(regs);
-
-	if (thread_info_flags & _TIF_HRTICK_RESCHED)
-		hrtick_resched();
 }
 
 void signal_fault(struct pt_regs *regs, void __user *frame, char *where)
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 0cb7aadc87cd..361b7a4c640c 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -121,132 +121,23 @@ static void native_smp_send_reschedule(int cpu)
 	send_IPI_mask(cpumask_of_cpu(cpu), RESCHEDULE_VECTOR);
 }
 
-/*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
- */
-static DEFINE_SPINLOCK(call_lock);
-
-struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	atomic_t started;
-	atomic_t finished;
-	int wait;
-};
-
-void lock_ipi_call_lock(void)
+void native_send_call_func_single_ipi(int cpu)
 {
-	spin_lock_irq(&call_lock);
-}
-
-void unlock_ipi_call_lock(void)
-{
-	spin_unlock_irq(&call_lock);
-}
-
-static struct call_data_struct *call_data;
-
-static void __smp_call_function(void (*func) (void *info), void *info,
-				int nonatomic, int wait)
-{
-	struct call_data_struct data;
-	int cpus = num_online_cpus() - 1;
-
-	if (!cpus)
-		return;
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	call_data = &data;
-	mb();
-
-	/* Send a message to all other CPUs and wait for them to respond */
-	send_IPI_allbutself(CALL_FUNCTION_VECTOR);
-
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
-		cpu_relax();
-
-	if (wait)
-		while (atomic_read(&data.finished) != cpus)
-			cpu_relax();
+	send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNCTION_SINGLE_VECTOR);
 }
 
-
-/**
- * smp_call_function_mask(): Run a function on a set of other CPUs.
- * @mask: The set of cpus to run on.  Must not include the current cpu.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @wait: If true, wait (atomically) until function has completed on other CPUs.
- *
-  * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-static int
-native_smp_call_function_mask(cpumask_t mask,
-			      void (*func)(void *), void *info,
-			      int wait)
+void native_send_call_func_ipi(cpumask_t mask)
 {
-	struct call_data_struct data;
 	cpumask_t allbutself;
-	int cpus;
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	/* Holding any lock stops cpus from going down. */
-	spin_lock(&call_lock);
 
 	allbutself = cpu_online_map;
 	cpu_clear(smp_processor_id(), allbutself);
 
-	cpus_and(mask, mask, allbutself);
-	cpus = cpus_weight(mask);
-
-	if (!cpus) {
-		spin_unlock(&call_lock);
-		return 0;
-	}
-
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
-
-	call_data = &data;
-	wmb();
-
-	/* Send a message to other CPUs */
 	if (cpus_equal(mask, allbutself) &&
 	    cpus_equal(cpu_online_map, cpu_callout_map))
 		send_IPI_allbutself(CALL_FUNCTION_VECTOR);
 	else
 		send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
-
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus)
-		cpu_relax();
-
-	if (wait)
-		while (atomic_read(&data.finished) != cpus)
-			cpu_relax();
-	spin_unlock(&call_lock);
-
-	return 0;
 }
 
 static void stop_this_cpu(void *dummy)
@@ -268,18 +159,13 @@ static void stop_this_cpu(void *dummy)
 
 static void native_smp_send_stop(void)
 {
-	int nolock;
 	unsigned long flags;
 
 	if (reboot_force)
 		return;
 
-	/* Don't deadlock on the call lock in panic */
-	nolock = !spin_trylock(&call_lock);
+	smp_call_function(stop_this_cpu, NULL, 0);
 	local_irq_save(flags);
-	__smp_call_function(stop_this_cpu, NULL, 0, 0);
-	if (!nolock)
-		spin_unlock(&call_lock);
 	disable_local_APIC();
 	local_irq_restore(flags);
 }
@@ -301,33 +187,28 @@ void smp_reschedule_interrupt(struct pt_regs *regs)
 
 void smp_call_function_interrupt(struct pt_regs *regs)
 {
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
-	int wait = call_data->wait;
-
 	ack_APIC_irq();
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function
-	 */
-	mb();
-	atomic_inc(&call_data->started);
-	/*
-	 * At this point the info structure may be out of scope unless wait==1
-	 */
 	irq_enter();
-	(*func)(info);
+	generic_smp_call_function_interrupt();
 #ifdef CONFIG_X86_32
 	__get_cpu_var(irq_stat).irq_call_count++;
 #else
 	add_pda(irq_call_count, 1);
 #endif
 	irq_exit();
+}
 
-	if (wait) {
-		mb();
-		atomic_inc(&call_data->finished);
-	}
+void smp_call_function_single_interrupt(struct pt_regs *regs)
+{
+	ack_APIC_irq();
+	irq_enter();
+	generic_smp_call_function_single_interrupt();
+#ifdef CONFIG_X86_32
+	__get_cpu_var(irq_stat).irq_call_count++;
+#else
+	add_pda(irq_call_count, 1);
+#endif
+	irq_exit();
 }
 
 struct smp_ops smp_ops = {
@@ -338,7 +219,8 @@ struct smp_ops smp_ops = {
 
 	.smp_send_stop = native_smp_send_stop,
 	.smp_send_reschedule = native_smp_send_reschedule,
-	.smp_call_function_mask = native_smp_call_function_mask,
+
+	.send_call_func_ipi = native_send_call_func_ipi,
+	.send_call_func_single_ipi = native_send_call_func_single_ipi,
 };
 EXPORT_SYMBOL_GPL(smp_ops);
-
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index f35c2d8016ac..332512767f4f 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -216,7 +216,7 @@ static void __cpuinit smp_callin(void)
 		panic("%s: phys CPU#%d, CPU#%d already present??\n", __func__,
 					phys_id, cpuid);
 	}
-	Dprintk("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
+	pr_debug("CPU#%d (phys ID: %d) waiting for CALLOUT\n", cpuid, phys_id);
 
 	/*
 	 * STARTUP IPIs are fragile beasts as they might sometimes
@@ -251,7 +251,7 @@ static void __cpuinit smp_callin(void)
 	 * boards)
 	 */
 
-	Dprintk("CALLIN, before setup_local_APIC().\n");
+	pr_debug("CALLIN, before setup_local_APIC().\n");
 	smp_callin_clear_local_apic();
 	setup_local_APIC();
 	end_local_APIC_setup();
@@ -266,7 +266,7 @@ static void __cpuinit smp_callin(void)
 	local_irq_enable();
 	calibrate_delay();
 	local_irq_disable();
-	Dprintk("Stack at about %p\n", &cpuid);
+	pr_debug("Stack at about %p\n", &cpuid);
 
 	/*
 	 * Save our processor parameters
@@ -327,12 +327,12 @@ static void __cpuinit start_secondary(void *unused)
 	 * lock helps us to not include this cpu in a currently in progress
 	 * smp_call_function().
 	 */
-	lock_ipi_call_lock();
+	ipi_call_lock_irq();
 #ifdef CONFIG_X86_IO_APIC
 	setup_vector_irq(smp_processor_id());
 #endif
 	cpu_set(smp_processor_id(), cpu_online_map);
-	unlock_ipi_call_lock();
+	ipi_call_unlock_irq();
 	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
 
 	setup_secondary_clock();
@@ -438,7 +438,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
 	cpu_set(cpu, cpu_sibling_setup_map);
 
 	if (smp_num_siblings > 1) {
-		for_each_cpu_mask(i, cpu_sibling_setup_map) {
+		for_each_cpu_mask_nr(i, cpu_sibling_setup_map) {
 			if (c->phys_proc_id == cpu_data(i).phys_proc_id &&
 			    c->cpu_core_id == cpu_data(i).cpu_core_id) {
 				cpu_set(i, per_cpu(cpu_sibling_map, cpu));
@@ -461,7 +461,7 @@ void __cpuinit set_cpu_sibling_map(int cpu)
 		return;
 	}
 
-	for_each_cpu_mask(i, cpu_sibling_setup_map) {
+	for_each_cpu_mask_nr(i, cpu_sibling_setup_map) {
 		if (per_cpu(cpu_llc_id, cpu) != BAD_APICID &&
 		    per_cpu(cpu_llc_id, cpu) == per_cpu(cpu_llc_id, i)) {
 			cpu_set(i, c->llc_shared_map);
@@ -513,7 +513,7 @@ static void impress_friends(void)
 	/*
 	 * Allow the user to impress friends.
 	 */
-	Dprintk("Before bogomips.\n");
+	pr_debug("Before bogomips.\n");
 	for_each_possible_cpu(cpu)
 		if (cpu_isset(cpu, cpu_callout_map))
 			bogosum += cpu_data(cpu).loops_per_jiffy;
@@ -523,7 +523,7 @@ static void impress_friends(void)
 		bogosum/(500000/HZ),
 		(bogosum/(5000/HZ))%100);
 
-	Dprintk("Before bogocount - setting activated=1.\n");
+	pr_debug("Before bogocount - setting activated=1.\n");
 }
 
 static inline void __inquire_remote_apic(int apicid)
@@ -546,8 +546,8 @@ static inline void __inquire_remote_apic(int apicid)
 			printk(KERN_CONT
 			       "a previous APIC delivery may have failed\n");
 
-		apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
-		apic_write_around(APIC_ICR, APIC_DM_REMRD | regs[i]);
+		apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
+		apic_write(APIC_ICR, APIC_DM_REMRD | regs[i]);
 
 		timeout = 0;
 		do {
@@ -579,29 +579,24 @@ wakeup_secondary_cpu(int logical_apicid, unsigned long start_eip)
 	int maxlvt;
 
 	/* Target chip */
-	apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid));
+	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(logical_apicid));
 
 	/* Boot on the stack */
 	/* Kick the second */
-	apic_write_around(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
+	apic_write(APIC_ICR, APIC_DM_NMI | APIC_DEST_LOGICAL);
 
-	Dprintk("Waiting for send to finish...\n");
+	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
 
 	/*
 	 * Give the other CPU some time to accept the IPI.
 	 */
 	udelay(200);
-	/*
-	 * Due to the Pentium erratum 3AP.
-	 */
 	maxlvt = lapic_get_maxlvt();
-	if (maxlvt > 3) {
-		apic_read_around(APIC_SPIV);
+	if (maxlvt > 3)			/* Due to the Pentium erratum 3AP.  */
 		apic_write(APIC_ESR, 0);
-	}
 	accept_status = (apic_read(APIC_ESR) & 0xEF);
-	Dprintk("NMI sent.\n");
+	pr_debug("NMI sent.\n");
 
 	if (send_status)
 		printk(KERN_ERR "APIC never delivered???\n");
@@ -625,42 +620,44 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 		return send_status;
 	}
 
+	maxlvt = lapic_get_maxlvt();
+
 	/*
 	 * Be paranoid about clearing APIC errors.
 	 */
 	if (APIC_INTEGRATED(apic_version[phys_apicid])) {
-		apic_read_around(APIC_SPIV);
-		apic_write(APIC_ESR, 0);
+		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP.  */
+			apic_write(APIC_ESR, 0);
 		apic_read(APIC_ESR);
 	}
 
-	Dprintk("Asserting INIT.\n");
+	pr_debug("Asserting INIT.\n");
 
 	/*
 	 * Turn INIT on target chip
 	 */
-	apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
 
 	/*
 	 * Send IPI
 	 */
-	apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT
-				| APIC_DM_INIT);
+	apic_write(APIC_ICR,
+		   APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT);
 
-	Dprintk("Waiting for send to finish...\n");
+	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
 
 	mdelay(10);
 
-	Dprintk("Deasserting INIT.\n");
+	pr_debug("Deasserting INIT.\n");
 
 	/* Target chip */
-	apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+	apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
 
 	/* Send IPI */
-	apic_write_around(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
+	apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
 
-	Dprintk("Waiting for send to finish...\n");
+	pr_debug("Waiting for send to finish...\n");
 	send_status = safe_apic_wait_icr_idle();
 
 	mb();
@@ -687,55 +684,47 @@ wakeup_secondary_cpu(int phys_apicid, unsigned long start_eip)
 	/*
 	 * Run STARTUP IPI loop.
 	 */
-	Dprintk("#startup loops: %d.\n", num_starts);
-
-	maxlvt = lapic_get_maxlvt();
+	pr_debug("#startup loops: %d.\n", num_starts);
 
 	for (j = 1; j <= num_starts; j++) {
-		Dprintk("Sending STARTUP #%d.\n", j);
-		apic_read_around(APIC_SPIV);
-		apic_write(APIC_ESR, 0);
+		pr_debug("Sending STARTUP #%d.\n", j);
+		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP.  */
+			apic_write(APIC_ESR, 0);
 		apic_read(APIC_ESR);
-		Dprintk("After apic_write.\n");
+		pr_debug("After apic_write.\n");
 
 		/*
 		 * STARTUP IPI
 		 */
 
 		/* Target chip */
-		apic_write_around(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
+		apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(phys_apicid));
 
 		/* Boot on the stack */
 		/* Kick the second */
-		apic_write_around(APIC_ICR, APIC_DM_STARTUP
-					| (start_eip >> 12));
+		apic_write(APIC_ICR, APIC_DM_STARTUP | (start_eip >> 12));
 
 		/*
 		 * Give the other CPU some time to accept the IPI.
 		 */
 		udelay(300);
 
-		Dprintk("Startup point 1.\n");
+		pr_debug("Startup point 1.\n");
 
-		Dprintk("Waiting for send to finish...\n");
+		pr_debug("Waiting for send to finish...\n");
 		send_status = safe_apic_wait_icr_idle();
 
 		/*
 		 * Give the other CPU some time to accept the IPI.
 		 */
 		udelay(200);
-		/*
-		 * Due to the Pentium erratum 3AP.
-		 */
-		if (maxlvt > 3) {
-			apic_read_around(APIC_SPIV);
+		if (maxlvt > 3)		/* Due to the Pentium erratum 3AP.  */
 			apic_write(APIC_ESR, 0);
-		}
 		accept_status = (apic_read(APIC_ESR) & 0xEF);
 		if (send_status || accept_status)
 			break;
 	}
-	Dprintk("After Startup.\n");
+	pr_debug("After Startup.\n");
 
 	if (send_status)
 		printk(KERN_ERR "APIC never delivered???\n");
@@ -768,7 +757,7 @@ static void __cpuinit do_fork_idle(struct work_struct *work)
  *
  * Must be called after the _cpu_pda pointer table is initialized.
  */
-static int __cpuinit get_local_pda(int cpu)
+int __cpuinit get_local_pda(int cpu)
 {
 	struct x8664_pda *oldpda, *newpda;
 	unsigned long size = sizeof(struct x8664_pda);
@@ -886,7 +875,7 @@ do_rest:
 
 	if (get_uv_system_type() != UV_NON_UNIQUE_APIC) {
 
-		Dprintk("Setting warm reset code and vector.\n");
+		pr_debug("Setting warm reset code and vector.\n");
 
 		store_NMI_vector(&nmi_high, &nmi_low);
 
@@ -907,9 +896,9 @@ do_rest:
 		/*
 		 * allow APs to start initializing.
 		 */
-		Dprintk("Before Callout %d.\n", cpu);
+		pr_debug("Before Callout %d.\n", cpu);
 		cpu_set(cpu, cpu_callout_map);
-		Dprintk("After Callout %d.\n", cpu);
+		pr_debug("After Callout %d.\n", cpu);
 
 		/*
 		 * Wait 5s total for a response
@@ -922,10 +911,10 @@ do_rest:
 
 		if (cpu_isset(cpu, cpu_callin_map)) {
 			/* number CPUs logically, starting from 1 (BSP is 0) */
-			Dprintk("OK.\n");
+			pr_debug("OK.\n");
 			printk(KERN_INFO "CPU%d: ", cpu);
 			print_cpu_info(&cpu_data(cpu));
-			Dprintk("CPU has booted.\n");
+			pr_debug("CPU has booted.\n");
 		} else {
 			boot_error = 1;
 			if (*((volatile unsigned char *)trampoline_base)
@@ -970,7 +959,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 
 	WARN_ON(irqs_disabled());
 
-	Dprintk("++++++++++++++++++++=_---CPU UP  %u\n", cpu);
+	pr_debug("++++++++++++++++++++=_---CPU UP  %u\n", cpu);
 
 	if (apicid == BAD_APICID || apicid == boot_cpu_physical_apicid ||
 	    !physid_isset(apicid, phys_cpu_present_map)) {
@@ -982,7 +971,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 	 * Already booted CPU?
 	 */
 	if (cpu_isset(cpu, cpu_callin_map)) {
-		Dprintk("do_boot_cpu %d Already started\n", cpu);
+		pr_debug("do_boot_cpu %d Already started\n", cpu);
 		return -ENOSYS;
 	}
 
@@ -1009,7 +998,7 @@ int __cpuinit native_cpu_up(unsigned int cpu)
 	err = do_boot_cpu(apicid, cpu);
 #endif
 	if (err) {
-		Dprintk("do_boot_cpu failed %d\n", err);
+		pr_debug("do_boot_cpu failed %d\n", err);
 		return -EIO;
 	}
 
@@ -1213,7 +1202,7 @@ void __init native_smp_prepare_boot_cpu(void)
 
 void __init native_smp_cpus_done(unsigned int max_cpus)
 {
-	Dprintk("Boot done.\n");
+	pr_debug("Boot done.\n");
 
 	impress_friends();
 	smp_checks();
@@ -1230,7 +1219,7 @@ static void remove_siblinginfo(int cpu)
 	int sibling;
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 
-	for_each_cpu_mask(sibling, per_cpu(cpu_core_map, cpu)) {
+	for_each_cpu_mask_nr(sibling, per_cpu(cpu_core_map, cpu)) {
 		cpu_clear(cpu, per_cpu(cpu_core_map, sibling));
 		/*/
 		 * last thread sibling in this cpu core going down
@@ -1239,7 +1228,7 @@ static void remove_siblinginfo(int cpu)
 			cpu_data(sibling).booted_cores--;
 	}
 
-	for_each_cpu_mask(sibling, per_cpu(cpu_sibling_map, cpu))
+	for_each_cpu_mask_nr(sibling, per_cpu(cpu_sibling_map, cpu))
 		cpu_clear(cpu, per_cpu(cpu_sibling_map, sibling));
 	cpus_clear(per_cpu(cpu_sibling_map, cpu));
 	cpus_clear(per_cpu(cpu_core_map, cpu));
@@ -1311,7 +1300,7 @@ static void __ref remove_cpu_from_maps(int cpu)
 	cpu_clear(cpu, cpu_callout_map);
 	cpu_clear(cpu, cpu_callin_map);
 	/* was set by cpu_init() */
-	clear_bit(cpu, (unsigned long *)&cpu_initialized);
+	cpu_clear(cpu, cpu_initialized);
 	numa_remove_cpu(cpu);
 }
 
@@ -1390,7 +1379,8 @@ static int __init parse_maxcpus(char *arg)
 {
 	extern unsigned int maxcpus;
 
-	maxcpus = simple_strtoul(arg, NULL, 0);
+	if (arg)
+		maxcpus = simple_strtoul(arg, NULL, 0);
 	return 0;
 }
 early_param("maxcpus", parse_maxcpus);
diff --git a/arch/x86/kernel/smpcommon.c b/arch/x86/kernel/smpcommon.c
index 3449064d141a..99941b37eca0 100644
--- a/arch/x86/kernel/smpcommon.c
+++ b/arch/x86/kernel/smpcommon.c
@@ -25,59 +25,3 @@ __cpuinit void init_gdt(int cpu)
 	per_cpu(cpu_number, cpu) = cpu;
 }
 #endif
-
-/**
- * smp_call_function(): Run a function on all other CPUs.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Unused.
- * @wait: If true, wait (atomically) until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- *
- * You must not call this function with disabled interrupts or from a
- * hardware interrupt handler or from a bottom half handler.
- */
-int smp_call_function(void (*func) (void *info), void *info, int nonatomic,
-		      int wait)
-{
-	return smp_call_function_mask(cpu_online_map, func, info, wait);
-}
-EXPORT_SYMBOL(smp_call_function);
-
-/**
- * smp_call_function_single - Run a function on a specific CPU
- * @cpu: The target CPU.  Cannot be the calling CPU.
- * @func: The function to run. This must be fast and non-blocking.
- * @info: An arbitrary pointer to pass to the function.
- * @nonatomic: Unused.
- * @wait: If true, wait until function has completed on other CPUs.
- *
- * Returns 0 on success, else a negative status code.
- *
- * If @wait is true, then returns once @func has returned; otherwise
- * it returns just before the target cpu calls @func.
- */
-int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
-			     int nonatomic, int wait)
-{
-	/* prevent preemption and reschedule on another processor */
-	int ret;
-	int me = get_cpu();
-	if (cpu == me) {
-		local_irq_disable();
-		func(info);
-		local_irq_enable();
-		put_cpu();
-		return 0;
-	}
-
-	ret = smp_call_function_mask(cpumask_of_cpu(cpu), func, info, wait);
-
-	put_cpu();
-	return ret;
-}
-EXPORT_SYMBOL(smp_call_function_single);
diff --git a/arch/x86/kernel/smpcommon_32.c b/arch/x86/kernel/smpcommon_32.c
deleted file mode 100644
index 8b137891791f..000000000000
--- a/arch/x86/kernel/smpcommon_32.c
+++ /dev/null
@@ -1 +0,0 @@
-
diff --git a/arch/x86/kernel/step.c b/arch/x86/kernel/step.c
index 92c20fee6781..e8b9863ef8c4 100644
--- a/arch/x86/kernel/step.c
+++ b/arch/x86/kernel/step.c
@@ -105,6 +105,20 @@ static int is_setting_trap_flag(struct task_struct *child, struct pt_regs *regs)
 static int enable_single_step(struct task_struct *child)
 {
 	struct pt_regs *regs = task_pt_regs(child);
+	unsigned long oflags;
+
+	/*
+	 * If we stepped into a sysenter/syscall insn, it trapped in
+	 * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP.
+	 * If user-mode had set TF itself, then it's still clear from
+	 * do_debug() and we need to set it again to restore the user
+	 * state so we don't wrongly set TIF_FORCED_TF below.
+	 * If enable_single_step() was used last and that is what
+	 * set TIF_SINGLESTEP, then both TF and TIF_FORCED_TF are
+	 * already set and our bookkeeping is fine.
+	 */
+	if (unlikely(test_tsk_thread_flag(child, TIF_SINGLESTEP)))
+		regs->flags |= X86_EFLAGS_TF;
 
 	/*
 	 * Always set TIF_SINGLESTEP - this guarantees that
@@ -113,11 +127,7 @@ static int enable_single_step(struct task_struct *child)
 	 */
 	set_tsk_thread_flag(child, TIF_SINGLESTEP);
 
-	/*
-	 * If TF was already set, don't do anything else
-	 */
-	if (regs->flags & X86_EFLAGS_TF)
-		return 0;
+	oflags = regs->flags;
 
 	/* Set TF on the kernel stack.. */
 	regs->flags |= X86_EFLAGS_TF;
@@ -126,9 +136,22 @@ static int enable_single_step(struct task_struct *child)
 	 * ..but if TF is changed by the instruction we will trace,
 	 * don't mark it as being "us" that set it, so that we
 	 * won't clear it by hand later.
+	 *
+	 * Note that if we don't actually execute the popf because
+	 * of a signal arriving right now or suchlike, we will lose
+	 * track of the fact that it really was "us" that set it.
 	 */
-	if (is_setting_trap_flag(child, regs))
+	if (is_setting_trap_flag(child, regs)) {
+		clear_tsk_thread_flag(child, TIF_FORCED_TF);
 		return 0;
+	}
+
+	/*
+	 * If TF was already set, check whether it was us who set it.
+	 * If not, we should never attempt a block step.
+	 */
+	if (oflags & X86_EFLAGS_TF)
+		return test_tsk_thread_flag(child, TIF_FORCED_TF);
 
 	set_tsk_thread_flag(child, TIF_FORCED_TF);
 
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index adff5562f5fd..d44395ff34c3 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -326,3 +326,9 @@ ENTRY(sys_call_table)
 	.long sys_fallocate
 	.long sys_timerfd_settime	/* 325 */
 	.long sys_timerfd_gettime
+	.long sys_signalfd4
+	.long sys_eventfd2
+	.long sys_epoll_create1
+	.long sys_dup3			/* 330 */
+	.long sys_pipe2
+	.long sys_inotify_init1
diff --git a/arch/x86/kernel/time_32.c b/arch/x86/kernel/time_32.c
index 059ca6ee59b4..ffe3c664afc0 100644
--- a/arch/x86/kernel/time_32.c
+++ b/arch/x86/kernel/time_32.c
@@ -129,6 +129,7 @@ void __init hpet_time_init(void)
  */
 void __init time_init(void)
 {
+	pre_time_init_hook();
 	tsc_init();
 	late_time_init = choose_time_init();
 }
diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c
index 9bb2363851af..fec1ecedc9b7 100644
--- a/arch/x86/kernel/tlb_32.c
+++ b/arch/x86/kernel/tlb_32.c
@@ -238,6 +238,6 @@ static void do_flush_tlb_all(void *info)
 
 void flush_tlb_all(void)
 {
-	on_each_cpu(do_flush_tlb_all, NULL, 1, 1);
+	on_each_cpu(do_flush_tlb_all, NULL, 1);
 }
 
diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/kernel/tlb_64.c
index 5039d0f097a2..dcbf7a1159ea 100644
--- a/arch/x86/kernel/tlb_64.c
+++ b/arch/x86/kernel/tlb_64.c
@@ -275,5 +275,5 @@ static void do_flush_tlb_all(void *info)
 
 void flush_tlb_all(void)
 {
-	on_each_cpu(do_flush_tlb_all, NULL, 1, 1);
+	on_each_cpu(do_flush_tlb_all, NULL, 1);
 }
diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c
index 8a768973c4f0..03df8e45e5a1 100644
--- a/arch/x86/kernel/traps_32.c
+++ b/arch/x86/kernel/traps_32.c
@@ -58,6 +58,7 @@
 #include <asm/nmi.h>
 #include <asm/smp.h>
 #include <asm/io.h>
+#include <asm/traps.h>
 
 #include "mach_traps.h"
 
@@ -77,26 +78,6 @@ char ignore_fpu_irq;
 gate_desc idt_table[256]
 	__attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
 
-asmlinkage void divide_error(void);
-asmlinkage void debug(void);
-asmlinkage void nmi(void);
-asmlinkage void int3(void);
-asmlinkage void overflow(void);
-asmlinkage void bounds(void);
-asmlinkage void invalid_op(void);
-asmlinkage void device_not_available(void);
-asmlinkage void coprocessor_segment_overrun(void);
-asmlinkage void invalid_TSS(void);
-asmlinkage void segment_not_present(void);
-asmlinkage void stack_segment(void);
-asmlinkage void general_protection(void);
-asmlinkage void page_fault(void);
-asmlinkage void coprocessor_error(void);
-asmlinkage void simd_coprocessor_error(void);
-asmlinkage void alignment_check(void);
-asmlinkage void spurious_interrupt_bug(void);
-asmlinkage void machine_check(void);
-
 int panic_on_unrecovered_nmi;
 int kstack_depth_to_print = 24;
 static unsigned int code_bytes = 64;
@@ -256,7 +237,7 @@ static const struct stacktrace_ops print_trace_ops = {
 
 static void
 show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
-		   unsigned long *stack, unsigned long bp, char *log_lvl)
+		unsigned long *stack, unsigned long bp, char *log_lvl)
 {
 	dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
 	printk("%s =======================\n", log_lvl);
@@ -383,6 +364,54 @@ int is_valid_bugaddr(unsigned long ip)
 	return ud2 == 0x0b0f;
 }
 
+static raw_spinlock_t die_lock = __RAW_SPIN_LOCK_UNLOCKED;
+static int die_owner = -1;
+static unsigned int die_nest_count;
+
+unsigned __kprobes long oops_begin(void)
+{
+	unsigned long flags;
+
+	oops_enter();
+
+	if (die_owner != raw_smp_processor_id()) {
+		console_verbose();
+		raw_local_irq_save(flags);
+		__raw_spin_lock(&die_lock);
+		die_owner = smp_processor_id();
+		die_nest_count = 0;
+		bust_spinlocks(1);
+	} else {
+		raw_local_irq_save(flags);
+	}
+	die_nest_count++;
+	return flags;
+}
+
+void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr)
+{
+	bust_spinlocks(0);
+	die_owner = -1;
+	add_taint(TAINT_DIE);
+	__raw_spin_unlock(&die_lock);
+	raw_local_irq_restore(flags);
+
+	if (!regs)
+		return;
+
+	if (kexec_should_crash(current))
+		crash_kexec(regs);
+
+	if (in_interrupt())
+		panic("Fatal exception in interrupt");
+
+	if (panic_on_oops)
+		panic("Fatal exception");
+
+	oops_exit();
+	do_exit(signr);
+}
+
 int __kprobes __die(const char *str, struct pt_regs *regs, long err)
 {
 	unsigned short ss;
@@ -423,31 +452,9 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err)
  */
 void die(const char *str, struct pt_regs *regs, long err)
 {
-	static struct {
-		raw_spinlock_t lock;
-		u32 lock_owner;
-		int lock_owner_depth;
-	} die = {
-		.lock =			__RAW_SPIN_LOCK_UNLOCKED,
-		.lock_owner =		-1,
-		.lock_owner_depth =	0
-	};
-	unsigned long flags;
-
-	oops_enter();
-
-	if (die.lock_owner != raw_smp_processor_id()) {
-		console_verbose();
-		raw_local_irq_save(flags);
-		__raw_spin_lock(&die.lock);
-		die.lock_owner = smp_processor_id();
-		die.lock_owner_depth = 0;
-		bust_spinlocks(1);
-	} else {
-		raw_local_irq_save(flags);
-	}
+	unsigned long flags = oops_begin();
 
-	if (++die.lock_owner_depth < 3) {
+	if (die_nest_count < 3) {
 		report_bug(regs->ip, regs);
 
 		if (__die(str, regs, err))
@@ -456,26 +463,7 @@ void die(const char *str, struct pt_regs *regs, long err)
 		printk(KERN_EMERG "Recursive die() failure, output suppressed\n");
 	}
 
-	bust_spinlocks(0);
-	die.lock_owner = -1;
-	add_taint(TAINT_DIE);
-	__raw_spin_unlock(&die.lock);
-	raw_local_irq_restore(flags);
-
-	if (!regs)
-		return;
-
-	if (kexec_should_crash(current))
-		crash_kexec(regs);
-
-	if (in_interrupt())
-		panic("Fatal exception in interrupt");
-
-	if (panic_on_oops)
-		panic("Fatal exception");
-
-	oops_exit();
-	do_exit(SIGSEGV);
+	oops_end(flags, regs, SIGSEGV);
 }
 
 static inline void
diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c
index 2696a6837782..3f18d73f420c 100644
--- a/arch/x86/kernel/traps_64.c
+++ b/arch/x86/kernel/traps_64.c
@@ -51,30 +51,10 @@
 #include <asm/pgalloc.h>
 #include <asm/proto.h>
 #include <asm/pda.h>
+#include <asm/traps.h>
 
 #include <mach_traps.h>
 
-asmlinkage void divide_error(void);
-asmlinkage void debug(void);
-asmlinkage void nmi(void);
-asmlinkage void int3(void);
-asmlinkage void overflow(void);
-asmlinkage void bounds(void);
-asmlinkage void invalid_op(void);
-asmlinkage void device_not_available(void);
-asmlinkage void double_fault(void);
-asmlinkage void coprocessor_segment_overrun(void);
-asmlinkage void invalid_TSS(void);
-asmlinkage void segment_not_present(void);
-asmlinkage void stack_segment(void);
-asmlinkage void general_protection(void);
-asmlinkage void page_fault(void);
-asmlinkage void coprocessor_error(void);
-asmlinkage void simd_coprocessor_error(void);
-asmlinkage void alignment_check(void);
-asmlinkage void spurious_interrupt_bug(void);
-asmlinkage void machine_check(void);
-
 int panic_on_unrecovered_nmi;
 int kstack_depth_to_print = 12;
 static unsigned int code_bytes = 64;
@@ -355,17 +335,24 @@ static const struct stacktrace_ops print_trace_ops = {
 	.address = print_trace_address,
 };
 
-void show_trace(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *stack, unsigned long bp)
+static void
+show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *stack, unsigned long bp, char *log_lvl)
 {
 	printk("\nCall Trace:\n");
-	dump_trace(task, regs, stack, bp, &print_trace_ops, NULL);
+	dump_trace(task, regs, stack, bp, &print_trace_ops, log_lvl);
 	printk("\n");
 }
 
+void show_trace(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *stack, unsigned long bp)
+{
+	show_trace_log_lvl(task, regs, stack, bp, "");
+}
+
 static void
-_show_stack(struct task_struct *task, struct pt_regs *regs,
-		unsigned long *sp, unsigned long bp)
+show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs,
+		unsigned long *sp, unsigned long bp, char *log_lvl)
 {
 	unsigned long *stack;
 	int i;
@@ -399,12 +386,12 @@ _show_stack(struct task_struct *task, struct pt_regs *regs,
 		printk(" %016lx", *stack++);
 		touch_nmi_watchdog();
 	}
-	show_trace(task, regs, sp, bp);
+	show_trace_log_lvl(task, regs, sp, bp, log_lvl);
 }
 
 void show_stack(struct task_struct *task, unsigned long *sp)
 {
-	_show_stack(task, NULL, sp, 0);
+	show_stack_log_lvl(task, NULL, sp, 0, "");
 }
 
 /*
@@ -454,7 +441,8 @@ void show_registers(struct pt_regs *regs)
 		u8 *ip;
 
 		printk("Stack: ");
-		_show_stack(NULL, regs, (unsigned long *)sp, regs->bp);
+		show_stack_log_lvl(NULL, regs, (unsigned long *)sp,
+				regs->bp, "");
 		printk("\n");
 
 		printk(KERN_EMERG "Code: ");
@@ -518,7 +506,7 @@ unsigned __kprobes long oops_begin(void)
 }
 
 void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, int signr)
-{ 
+{
 	die_owner = -1;
 	bust_spinlocks(0);
 	die_nest_count--;
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 3c36f92160c9..7603c0553909 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -358,6 +358,7 @@ static cycle_t read_tsc(void)
 		ret : clocksource_tsc.cycle_last;
 }
 
+#ifdef CONFIG_X86_64
 static cycle_t __vsyscall_fn vread_tsc(void)
 {
 	cycle_t ret = (cycle_t)vget_cycles();
@@ -365,6 +366,7 @@ static cycle_t __vsyscall_fn vread_tsc(void)
 	return ret >= __vsyscall_gtod_data.clock.cycle_last ?
 		ret : __vsyscall_gtod_data.clock.cycle_last;
 }
+#endif
 
 static struct clocksource clocksource_tsc = {
 	.name                   = "tsc",
diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c
index e94bdb6add1d..41e01b145c48 100644
--- a/arch/x86/kernel/visws_quirks.c
+++ b/arch/x86/kernel/visws_quirks.c
@@ -73,7 +73,7 @@ int is_visws_box(void)
 	return visws_board_type >= 0;
 }
 
-static int __init visws_time_init_quirk(void)
+static int __init visws_time_init(void)
 {
 	printk(KERN_INFO "Starting Cobalt Timer system clock\n");
 
@@ -93,7 +93,7 @@ static int __init visws_time_init_quirk(void)
 	return 0;
 }
 
-static int __init visws_pre_intr_init_quirk(void)
+static int __init visws_pre_intr_init(void)
 {
 	init_VISWS_APIC_irqs();
 
@@ -114,7 +114,7 @@ EXPORT_SYMBOL(sgivwfb_mem_size);
 
 long long mem_size __initdata = 0;
 
-static char * __init visws_memory_setup_quirk(void)
+static char * __init visws_memory_setup(void)
 {
 	long long gfx_mem_size = 8 * MB;
 
@@ -176,7 +176,7 @@ static void visws_machine_power_off(void)
 	outl(PIIX_SPECIAL_STOP, 0xCFC);
 }
 
-static int __init visws_get_smp_config_quirk(unsigned int early)
+static int __init visws_get_smp_config(unsigned int early)
 {
 	/*
 	 * Prevent MP-table parsing by the generic code:
@@ -192,7 +192,7 @@ extern unsigned int __cpuinitdata maxcpus;
  * No problem for Linux.
  */
 
-static void __init MP_processor_info (struct mpc_config_processor *m)
+static void __init MP_processor_info(struct mpc_config_processor *m)
 {
 	int ver, logical_apicid;
 	physid_mask_t apic_cpus;
@@ -232,7 +232,7 @@ static void __init MP_processor_info (struct mpc_config_processor *m)
 	apic_version[m->mpc_apicid] = ver;
 }
 
-int __init visws_find_smp_config_quirk(unsigned int reserve)
+static int __init visws_find_smp_config(unsigned int reserve)
 {
 	struct mpc_config_processor *mp = phys_to_virt(CO_CPU_TAB_PHYS);
 	unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
@@ -258,7 +258,17 @@ int __init visws_find_smp_config_quirk(unsigned int reserve)
 	return 1;
 }
 
-extern int visws_trap_init_quirk(void);
+static int visws_trap_init(void);
+
+static struct x86_quirks visws_x86_quirks __initdata = {
+	.arch_time_init		= visws_time_init,
+	.arch_pre_intr_init	= visws_pre_intr_init,
+	.arch_memory_setup	= visws_memory_setup,
+	.arch_intr_init		= NULL,
+	.arch_trap_init		= visws_trap_init,
+	.mach_get_smp_config	= visws_get_smp_config,
+	.mach_find_smp_config	= visws_find_smp_config,
+};
 
 void __init visws_early_detect(void)
 {
@@ -272,16 +282,10 @@ void __init visws_early_detect(void)
 
 	/*
 	 * Install special quirks for timer, interrupt and memory setup:
-	 */
-	arch_time_init_quirk		= visws_time_init_quirk;
-	arch_pre_intr_init_quirk	= visws_pre_intr_init_quirk;
-	arch_memory_setup_quirk		= visws_memory_setup_quirk;
-
-	/*
 	 * Fall back to generic behavior for traps:
+	 * Override generic MP-table parsing:
 	 */
-	arch_intr_init_quirk		= NULL;
-	arch_trap_init_quirk		= visws_trap_init_quirk;
+	x86_quirks = &visws_x86_quirks;
 
 	/*
 	 * Install reboot quirks:
@@ -294,12 +298,6 @@ void __init visws_early_detect(void)
 	 */
 	no_broadcast = 0;
 
-	/*
-	 * Override generic MP-table parsing:
-	 */
-	mach_get_smp_config_quirk	= visws_get_smp_config_quirk;
-	mach_find_smp_config_quirk	= visws_find_smp_config_quirk;
-
 #ifdef CONFIG_X86_IO_APIC
 	/*
 	 * Turn off IO-APIC detection and initialization:
@@ -426,7 +424,7 @@ static __init void cobalt_init(void)
 		co_apic_read(CO_APIC_ID));
 }
 
-int __init visws_trap_init_quirk(void)
+static int __init visws_trap_init(void)
 {
 	lithium_init();
 	cobalt_init();
diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c
index b15346092b7b..0a1b1a9d922d 100644
--- a/arch/x86/kernel/vmi_32.c
+++ b/arch/x86/kernel/vmi_32.c
@@ -906,7 +906,6 @@ static inline int __init activate_vmi(void)
 #ifdef CONFIG_X86_LOCAL_APIC
 	para_fill(pv_apic_ops.apic_read, APICRead);
 	para_fill(pv_apic_ops.apic_write, APICWrite);
-	para_fill(pv_apic_ops.apic_write_atomic, APICWrite);
 #endif
 
 	/*
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index e50740d32314..0b8b6690a86d 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -279,7 +279,7 @@ cpu_vsyscall_notifier(struct notifier_block *n, unsigned long action, void *arg)
 {
 	long cpu = (long)arg;
 	if (action == CPU_ONLINE || action == CPU_ONLINE_FROZEN)
-		smp_call_function_single(cpu, cpu_vsyscall_init, NULL, 0, 1);
+		smp_call_function_single(cpu, cpu_vsyscall_init, NULL, 1);
 	return NOTIFY_DONE;
 }
 
@@ -302,7 +302,7 @@ static int __init vsyscall_init(void)
 #ifdef CONFIG_SYSCTL
 	register_sysctl_table(kernel_root_table2);
 #endif
-	on_each_cpu(cpu_vsyscall_init, NULL, 0, 1);
+	on_each_cpu(cpu_vsyscall_init, NULL, 1);
 	hotcpu_notifier(cpu_vsyscall_notifier, 0);
 	return 0;
 }
diff --git a/arch/x86/kvm/Kconfig b/arch/x86/kvm/Kconfig
index 8d45fabc5f3b..ce3251ce5504 100644
--- a/arch/x86/kvm/Kconfig
+++ b/arch/x86/kvm/Kconfig
@@ -21,6 +21,7 @@ config KVM
 	tristate "Kernel-based Virtual Machine (KVM) support"
 	depends on HAVE_KVM
 	select PREEMPT_NOTIFIERS
+	select MMU_NOTIFIER
 	select ANON_INODES
 	---help---
 	  Support hosting fully virtualized guest machines using hardware
diff --git a/arch/x86/kvm/Makefile b/arch/x86/kvm/Makefile
index c97d35c218db..d0e940bb6f40 100644
--- a/arch/x86/kvm/Makefile
+++ b/arch/x86/kvm/Makefile
@@ -2,7 +2,8 @@
 # Makefile for Kernel-based Virtual Machine module
 #
 
-common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o)
+common-objs = $(addprefix ../../../virt/kvm/, kvm_main.o ioapic.o \
+                coalesced_mmio.o)
 ifeq ($(CONFIG_KVM_TRACE),y)
 common-objs += $(addprefix ../../../virt/kvm/, kvm_trace.o)
 endif
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 3829aa7b663f..c0f7872a9124 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -91,7 +91,7 @@ static void pit_set_gate(struct kvm *kvm, int channel, u32 val)
 	c->gate = val;
 }
 
-int pit_get_gate(struct kvm *kvm, int channel)
+static int pit_get_gate(struct kvm *kvm, int channel)
 {
 	WARN_ON(!mutex_is_locked(&kvm->arch.vpit->pit_state.lock));
 
@@ -193,19 +193,16 @@ static void pit_latch_status(struct kvm *kvm, int channel)
 	}
 }
 
-int __pit_timer_fn(struct kvm_kpit_state *ps)
+static int __pit_timer_fn(struct kvm_kpit_state *ps)
 {
 	struct kvm_vcpu *vcpu0 = ps->pit->kvm->vcpus[0];
 	struct kvm_kpit_timer *pt = &ps->pit_timer;
 
-	atomic_inc(&pt->pending);
-	smp_mb__after_atomic_inc();
-	if (vcpu0) {
+	if (!atomic_inc_and_test(&pt->pending))
 		set_bit(KVM_REQ_PENDING_TIMER, &vcpu0->requests);
-		if (waitqueue_active(&vcpu0->wq)) {
-			vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
-			wake_up_interruptible(&vcpu0->wq);
-		}
+	if (vcpu0 && waitqueue_active(&vcpu0->wq)) {
+		vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
+		wake_up_interruptible(&vcpu0->wq);
 	}
 
 	pt->timer.expires = ktime_add_ns(pt->timer.expires, pt->period);
@@ -308,6 +305,7 @@ static void pit_load_count(struct kvm *kvm, int channel, u32 val)
 		create_pit_timer(&ps->pit_timer, val, 0);
 		break;
 	case 2:
+	case 3:
 		create_pit_timer(&ps->pit_timer, val, 1);
 		break;
 	default:
@@ -459,7 +457,8 @@ static void pit_ioport_read(struct kvm_io_device *this,
 	mutex_unlock(&pit_state->lock);
 }
 
-static int pit_in_range(struct kvm_io_device *this, gpa_t addr)
+static int pit_in_range(struct kvm_io_device *this, gpa_t addr,
+			int len, int is_write)
 {
 	return ((addr >= KVM_PIT_BASE_ADDRESS) &&
 		(addr < KVM_PIT_BASE_ADDRESS + KVM_PIT_MEM_LENGTH));
@@ -500,7 +499,8 @@ static void speaker_ioport_read(struct kvm_io_device *this,
 	mutex_unlock(&pit_state->lock);
 }
 
-static int speaker_in_range(struct kvm_io_device *this, gpa_t addr)
+static int speaker_in_range(struct kvm_io_device *this, gpa_t addr,
+			    int len, int is_write)
 {
 	return (addr == KVM_SPEAKER_BASE_ADDRESS);
 }
@@ -575,7 +575,7 @@ void kvm_free_pit(struct kvm *kvm)
 	}
 }
 
-void __inject_pit_timer_intr(struct kvm *kvm)
+static void __inject_pit_timer_intr(struct kvm *kvm)
 {
 	mutex_lock(&kvm->lock);
 	kvm_ioapic_set_irq(kvm->arch.vioapic, 0, 1);
diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c
index ab29cf2def47..c31164e8aa46 100644
--- a/arch/x86/kvm/i8259.c
+++ b/arch/x86/kvm/i8259.c
@@ -130,8 +130,10 @@ void kvm_pic_set_irq(void *opaque, int irq, int level)
 {
 	struct kvm_pic *s = opaque;
 
-	pic_set_irq1(&s->pics[irq >> 3], irq & 7, level);
-	pic_update_irq(s);
+	if (irq >= 0 && irq < PIC_NUM_PINS) {
+		pic_set_irq1(&s->pics[irq >> 3], irq & 7, level);
+		pic_update_irq(s);
+	}
 }
 
 /*
@@ -346,7 +348,8 @@ static u32 elcr_ioport_read(void *opaque, u32 addr1)
 	return s->elcr;
 }
 
-static int picdev_in_range(struct kvm_io_device *this, gpa_t addr)
+static int picdev_in_range(struct kvm_io_device *this, gpa_t addr,
+			   int len, int is_write)
 {
 	switch (addr) {
 	case 0x20:
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 2a15be2275c0..7ca47cbb48bb 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -30,6 +30,8 @@
 #include "ioapic.h"
 #include "lapic.h"
 
+#define PIC_NUM_PINS 16
+
 struct kvm;
 struct kvm_vcpu;
 
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index ebc03f5ae162..73f43de69f67 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -356,8 +356,9 @@ static int __apic_accept_irq(struct kvm_lapic *apic, int delivery_mode,
 	case APIC_DM_SMI:
 		printk(KERN_DEBUG "Ignoring guest SMI\n");
 		break;
+
 	case APIC_DM_NMI:
-		printk(KERN_DEBUG "Ignoring guest NMI\n");
+		kvm_inject_nmi(vcpu);
 		break;
 
 	case APIC_DM_INIT:
@@ -572,6 +573,8 @@ static u32 __apic_read(struct kvm_lapic *apic, unsigned int offset)
 {
 	u32 val = 0;
 
+	KVMTRACE_1D(APIC_ACCESS, apic->vcpu, (u32)offset, handler);
+
 	if (offset >= LAPIC_MMIO_LENGTH)
 		return 0;
 
@@ -695,6 +698,8 @@ static void apic_mmio_write(struct kvm_io_device *this,
 
 	offset &= 0xff0;
 
+	KVMTRACE_1D(APIC_ACCESS, apic->vcpu, (u32)offset, handler);
+
 	switch (offset) {
 	case APIC_ID:		/* Local APIC ID */
 		apic_set_reg(apic, APIC_ID, val);
@@ -780,7 +785,8 @@ static void apic_mmio_write(struct kvm_io_device *this,
 
 }
 
-static int apic_mmio_range(struct kvm_io_device *this, gpa_t addr)
+static int apic_mmio_range(struct kvm_io_device *this, gpa_t addr,
+			   int len, int size)
 {
 	struct kvm_lapic *apic = (struct kvm_lapic *)this->private;
 	int ret = 0;
@@ -939,8 +945,8 @@ static int __apic_timer_fn(struct kvm_lapic *apic)
 	int result = 0;
 	wait_queue_head_t *q = &apic->vcpu->wq;
 
-	atomic_inc(&apic->timer.pending);
-	set_bit(KVM_REQ_PENDING_TIMER, &apic->vcpu->requests);
+	if(!atomic_inc_and_test(&apic->timer.pending))
+		set_bit(KVM_REQ_PENDING_TIMER, &apic->vcpu->requests);
 	if (waitqueue_active(q)) {
 		apic->vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE;
 		wake_up_interruptible(q);
diff --git a/arch/x86/kvm/lapic.h b/arch/x86/kvm/lapic.h
index 676c396c9cee..81858881287e 100644
--- a/arch/x86/kvm/lapic.h
+++ b/arch/x86/kvm/lapic.h
@@ -31,6 +31,7 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu);
 u64 kvm_lapic_get_cr8(struct kvm_vcpu *vcpu);
 void kvm_lapic_set_tpr(struct kvm_vcpu *vcpu, unsigned long cr8);
 void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value);
+u64 kvm_lapic_get_base(struct kvm_vcpu *vcpu);
 
 int kvm_apic_match_physical_addr(struct kvm_lapic *apic, u16 dest);
 int kvm_apic_match_logical_addr(struct kvm_lapic *apic, u8 mda);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 7e7c3969f7a2..0bfe2bd305eb 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -66,7 +66,8 @@ static void kvm_mmu_audit(struct kvm_vcpu *vcpu, const char *msg) {}
 #endif
 
 #if defined(MMU_DEBUG) || defined(AUDIT)
-static int dbg = 1;
+static int dbg = 0;
+module_param(dbg, bool, 0644);
 #endif
 
 #ifndef MMU_DEBUG
@@ -652,6 +653,84 @@ static void rmap_write_protect(struct kvm *kvm, u64 gfn)
 	account_shadowed(kvm, gfn);
 }
 
+static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp)
+{
+	u64 *spte;
+	int need_tlb_flush = 0;
+
+	while ((spte = rmap_next(kvm, rmapp, NULL))) {
+		BUG_ON(!(*spte & PT_PRESENT_MASK));
+		rmap_printk("kvm_rmap_unmap_hva: spte %p %llx\n", spte, *spte);
+		rmap_remove(kvm, spte);
+		set_shadow_pte(spte, shadow_trap_nonpresent_pte);
+		need_tlb_flush = 1;
+	}
+	return need_tlb_flush;
+}
+
+static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
+			  int (*handler)(struct kvm *kvm, unsigned long *rmapp))
+{
+	int i;
+	int retval = 0;
+
+	/*
+	 * If mmap_sem isn't taken, we can look the memslots with only
+	 * the mmu_lock by skipping over the slots with userspace_addr == 0.
+	 */
+	for (i = 0; i < kvm->nmemslots; i++) {
+		struct kvm_memory_slot *memslot = &kvm->memslots[i];
+		unsigned long start = memslot->userspace_addr;
+		unsigned long end;
+
+		/* mmu_lock protects userspace_addr */
+		if (!start)
+			continue;
+
+		end = start + (memslot->npages << PAGE_SHIFT);
+		if (hva >= start && hva < end) {
+			gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT;
+			retval |= handler(kvm, &memslot->rmap[gfn_offset]);
+			retval |= handler(kvm,
+					  &memslot->lpage_info[
+						  gfn_offset /
+						  KVM_PAGES_PER_HPAGE].rmap_pde);
+		}
+	}
+
+	return retval;
+}
+
+int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)
+{
+	return kvm_handle_hva(kvm, hva, kvm_unmap_rmapp);
+}
+
+static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp)
+{
+	u64 *spte;
+	int young = 0;
+
+	spte = rmap_next(kvm, rmapp, NULL);
+	while (spte) {
+		int _young;
+		u64 _spte = *spte;
+		BUG_ON(!(_spte & PT_PRESENT_MASK));
+		_young = _spte & PT_ACCESSED_MASK;
+		if (_young) {
+			young = 1;
+			clear_bit(PT_ACCESSED_SHIFT, (unsigned long *)spte);
+		}
+		spte = rmap_next(kvm, rmapp, spte);
+	}
+	return young;
+}
+
+int kvm_age_hva(struct kvm *kvm, unsigned long hva)
+{
+	return kvm_handle_hva(kvm, hva, kvm_age_rmapp);
+}
+
 #ifdef MMU_DEBUG
 static int is_empty_shadow_page(u64 *spt)
 {
@@ -776,6 +855,15 @@ static void mmu_page_remove_parent_pte(struct kvm_mmu_page *sp,
 	BUG();
 }
 
+static void nonpaging_prefetch_page(struct kvm_vcpu *vcpu,
+				    struct kvm_mmu_page *sp)
+{
+	int i;
+
+	for (i = 0; i < PT64_ENT_PER_PAGE; ++i)
+		sp->spt[i] = shadow_trap_nonpresent_pte;
+}
+
 static struct kvm_mmu_page *kvm_mmu_lookup_page(struct kvm *kvm, gfn_t gfn)
 {
 	unsigned index;
@@ -841,7 +929,10 @@ static struct kvm_mmu_page *kvm_mmu_get_page(struct kvm_vcpu *vcpu,
 	hlist_add_head(&sp->hash_link, bucket);
 	if (!metaphysical)
 		rmap_write_protect(vcpu->kvm, gfn);
-	vcpu->arch.mmu.prefetch_page(vcpu, sp);
+	if (shadow_trap_nonpresent_pte != shadow_notrap_nonpresent_pte)
+		vcpu->arch.mmu.prefetch_page(vcpu, sp);
+	else
+		nonpaging_prefetch_page(vcpu, sp);
 	return sp;
 }
 
@@ -917,14 +1008,17 @@ static void kvm_mmu_zap_page(struct kvm *kvm, struct kvm_mmu_page *sp)
 	}
 	kvm_mmu_page_unlink_children(kvm, sp);
 	if (!sp->root_count) {
-		if (!sp->role.metaphysical)
+		if (!sp->role.metaphysical && !sp->role.invalid)
 			unaccount_shadowed(kvm, sp->gfn);
 		hlist_del(&sp->hash_link);
 		kvm_mmu_free_page(kvm, sp);
 	} else {
+		int invalid = sp->role.invalid;
 		list_move(&sp->link, &kvm->arch.active_mmu_pages);
 		sp->role.invalid = 1;
 		kvm_reload_remote_mmus(kvm);
+		if (!sp->role.metaphysical && !invalid)
+			unaccount_shadowed(kvm, sp->gfn);
 	}
 	kvm_mmu_reset_last_pte_updated(kvm);
 }
@@ -1103,7 +1197,7 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 		mark_page_dirty(vcpu->kvm, gfn);
 
 	pgprintk("%s: setting spte %llx\n", __func__, spte);
-	pgprintk("instantiating %s PTE (%s) at %d (%llx) addr %llx\n",
+	pgprintk("instantiating %s PTE (%s) at %ld (%llx) addr %p\n",
 		 (spte&PT_PAGE_SIZE_MASK)? "2MB" : "4kB",
 		 (spte&PT_WRITABLE_MASK)?"RW":"R", gfn, spte, shadow_pte);
 	set_shadow_pte(shadow_pte, spte);
@@ -1122,8 +1216,10 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte,
 		else
 			kvm_release_pfn_clean(pfn);
 	}
-	if (!ptwrite || !*ptwrite)
+	if (speculative) {
 		vcpu->arch.last_pte_updated = shadow_pte;
+		vcpu->arch.last_pte_gfn = gfn;
+	}
 }
 
 static void nonpaging_new_cr3(struct kvm_vcpu *vcpu)
@@ -1171,9 +1267,10 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t v, int write,
 				return -ENOMEM;
 			}
 
-			table[index] = __pa(new_table->spt)
-				| PT_PRESENT_MASK | PT_WRITABLE_MASK
-				| shadow_user_mask | shadow_x_mask;
+			set_shadow_pte(&table[index],
+				       __pa(new_table->spt)
+				       | PT_PRESENT_MASK | PT_WRITABLE_MASK
+				       | shadow_user_mask | shadow_x_mask);
 		}
 		table_addr = table[index] & PT64_BASE_ADDR_MASK;
 	}
@@ -1184,6 +1281,7 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 	int r;
 	int largepage = 0;
 	pfn_t pfn;
+	unsigned long mmu_seq;
 
 	down_read(&current->mm->mmap_sem);
 	if (is_largepage_backed(vcpu, gfn & ~(KVM_PAGES_PER_HPAGE-1))) {
@@ -1191,6 +1289,8 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 		largepage = 1;
 	}
 
+	mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	/* implicit mb(), we'll read before PT lock is unlocked */
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
 	up_read(&current->mm->mmap_sem);
 
@@ -1201,6 +1301,8 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 	}
 
 	spin_lock(&vcpu->kvm->mmu_lock);
+	if (mmu_notifier_retry(vcpu, mmu_seq))
+		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
 	r = __direct_map(vcpu, v, write, largepage, gfn, pfn,
 			 PT32E_ROOT_LEVEL);
@@ -1208,18 +1310,14 @@ static int nonpaging_map(struct kvm_vcpu *vcpu, gva_t v, int write, gfn_t gfn)
 
 
 	return r;
-}
-
-
-static void nonpaging_prefetch_page(struct kvm_vcpu *vcpu,
-				    struct kvm_mmu_page *sp)
-{
-	int i;
 
-	for (i = 0; i < PT64_ENT_PER_PAGE; ++i)
-		sp->spt[i] = shadow_trap_nonpresent_pte;
+out_unlock:
+	spin_unlock(&vcpu->kvm->mmu_lock);
+	kvm_release_pfn_clean(pfn);
+	return 0;
 }
 
+
 static void mmu_free_roots(struct kvm_vcpu *vcpu)
 {
 	int i;
@@ -1335,6 +1433,7 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 	int r;
 	int largepage = 0;
 	gfn_t gfn = gpa >> PAGE_SHIFT;
+	unsigned long mmu_seq;
 
 	ASSERT(vcpu);
 	ASSERT(VALID_PAGE(vcpu->arch.mmu.root_hpa));
@@ -1348,6 +1447,8 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 		gfn &= ~(KVM_PAGES_PER_HPAGE-1);
 		largepage = 1;
 	}
+	mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	/* implicit mb(), we'll read before PT lock is unlocked */
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
 	up_read(&current->mm->mmap_sem);
 	if (is_error_pfn(pfn)) {
@@ -1355,12 +1456,19 @@ static int tdp_page_fault(struct kvm_vcpu *vcpu, gva_t gpa,
 		return 1;
 	}
 	spin_lock(&vcpu->kvm->mmu_lock);
+	if (mmu_notifier_retry(vcpu, mmu_seq))
+		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
 	r = __direct_map(vcpu, gpa, error_code & PFERR_WRITE_MASK,
 			 largepage, gfn, pfn, kvm_x86_ops->get_tdp_level());
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
 	return r;
+
+out_unlock:
+	spin_unlock(&vcpu->kvm->mmu_lock);
+	kvm_release_pfn_clean(pfn);
+	return 0;
 }
 
 static void nonpaging_free(struct kvm_vcpu *vcpu)
@@ -1660,6 +1768,8 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 		gfn &= ~(KVM_PAGES_PER_HPAGE-1);
 		vcpu->arch.update_pte.largepage = 1;
 	}
+	vcpu->arch.update_pte.mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	/* implicit mb(), we'll read before PT lock is unlocked */
 	pfn = gfn_to_pfn(vcpu->kvm, gfn);
 	up_read(&current->mm->mmap_sem);
 
@@ -1671,6 +1781,18 @@ static void mmu_guess_page_from_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	vcpu->arch.update_pte.pfn = pfn;
 }
 
+static void kvm_mmu_access_page(struct kvm_vcpu *vcpu, gfn_t gfn)
+{
+	u64 *spte = vcpu->arch.last_pte_updated;
+
+	if (spte
+	    && vcpu->arch.last_pte_gfn == gfn
+	    && shadow_accessed_mask
+	    && !(*spte & shadow_accessed_mask)
+	    && is_shadow_present_pte(*spte))
+		set_bit(PT_ACCESSED_SHIFT, (unsigned long *)spte);
+}
+
 void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 		       const u8 *new, int bytes)
 {
@@ -1694,6 +1816,7 @@ void kvm_mmu_pte_write(struct kvm_vcpu *vcpu, gpa_t gpa,
 	pgprintk("%s: gpa %llx bytes %d\n", __func__, gpa, bytes);
 	mmu_guess_page_from_pte_write(vcpu, gpa, new, bytes);
 	spin_lock(&vcpu->kvm->mmu_lock);
+	kvm_mmu_access_page(vcpu, gfn);
 	kvm_mmu_free_some_pages(vcpu);
 	++vcpu->kvm->stat.mmu_pte_write;
 	kvm_mmu_audit(vcpu, "pre pte write");
@@ -1791,6 +1914,7 @@ int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva)
 	spin_unlock(&vcpu->kvm->mmu_lock);
 	return r;
 }
+EXPORT_SYMBOL_GPL(kvm_mmu_unprotect_page_virt);
 
 void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu)
 {
@@ -1847,6 +1971,12 @@ void kvm_enable_tdp(void)
 }
 EXPORT_SYMBOL_GPL(kvm_enable_tdp);
 
+void kvm_disable_tdp(void)
+{
+	tdp_enabled = false;
+}
+EXPORT_SYMBOL_GPL(kvm_disable_tdp);
+
 static void free_mmu_pages(struct kvm_vcpu *vcpu)
 {
 	struct kvm_mmu_page *sp;
@@ -1948,7 +2078,7 @@ void kvm_mmu_zap_all(struct kvm *kvm)
 	kvm_flush_remote_tlbs(kvm);
 }
 
-void kvm_mmu_remove_one_alloc_mmu_page(struct kvm *kvm)
+static void kvm_mmu_remove_one_alloc_mmu_page(struct kvm *kvm)
 {
 	struct kvm_mmu_page *page;
 
@@ -1968,6 +2098,8 @@ static int mmu_shrink(int nr_to_scan, gfp_t gfp_mask)
 	list_for_each_entry(kvm, &vm_list, vm_list) {
 		int npages;
 
+		if (!down_read_trylock(&kvm->slots_lock))
+			continue;
 		spin_lock(&kvm->mmu_lock);
 		npages = kvm->arch.n_alloc_mmu_pages -
 			 kvm->arch.n_free_mmu_pages;
@@ -1980,6 +2112,7 @@ static int mmu_shrink(int nr_to_scan, gfp_t gfp_mask)
 		nr_to_scan--;
 
 		spin_unlock(&kvm->mmu_lock);
+		up_read(&kvm->slots_lock);
 	}
 	if (kvm_freed)
 		list_move_tail(&kvm_freed->vm_list, &vm_list);
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index 1730757bbc7a..258e5d56298e 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -15,7 +15,8 @@
 #define PT_USER_MASK (1ULL << 2)
 #define PT_PWT_MASK (1ULL << 3)
 #define PT_PCD_MASK (1ULL << 4)
-#define PT_ACCESSED_MASK (1ULL << 5)
+#define PT_ACCESSED_SHIFT 5
+#define PT_ACCESSED_MASK (1ULL << PT_ACCESSED_SHIFT)
 #define PT_DIRTY_MASK (1ULL << 6)
 #define PT_PAGE_SIZE_MASK (1ULL << 7)
 #define PT_PAT_MASK (1ULL << 7)
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 934c7b619396..f72ac1fa35f0 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -263,6 +263,8 @@ static void FNAME(update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *page,
 	pfn = vcpu->arch.update_pte.pfn;
 	if (is_error_pfn(pfn))
 		return;
+	if (mmu_notifier_retry(vcpu, vcpu->arch.update_pte.mmu_seq))
+		return;
 	kvm_get_pfn(pfn);
 	mmu_set_spte(vcpu, spte, page->role.access, pte_access, 0, 0,
 		     gpte & PT_DIRTY_MASK, NULL, largepage, gpte_to_gfn(gpte),
@@ -380,6 +382,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	int r;
 	pfn_t pfn;
 	int largepage = 0;
+	unsigned long mmu_seq;
 
 	pgprintk("%s: addr %lx err %x\n", __func__, addr, error_code);
 	kvm_mmu_audit(vcpu, "pre page fault");
@@ -413,6 +416,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 			largepage = 1;
 		}
 	}
+	mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	/* implicit mb(), we'll read before PT lock is unlocked */
 	pfn = gfn_to_pfn(vcpu->kvm, walker.gfn);
 	up_read(&current->mm->mmap_sem);
 
@@ -424,6 +429,8 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	}
 
 	spin_lock(&vcpu->kvm->mmu_lock);
+	if (mmu_notifier_retry(vcpu, mmu_seq))
+		goto out_unlock;
 	kvm_mmu_free_some_pages(vcpu);
 	shadow_pte = FNAME(fetch)(vcpu, addr, &walker, user_fault, write_fault,
 				  largepage, &write_pt, pfn);
@@ -439,6 +446,11 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr,
 	spin_unlock(&vcpu->kvm->mmu_lock);
 
 	return write_pt;
+
+out_unlock:
+	spin_unlock(&vcpu->kvm->mmu_lock);
+	kvm_release_pfn_clean(pfn);
+	return 0;
 }
 
 static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr)
@@ -460,8 +472,9 @@ static gpa_t FNAME(gva_to_gpa)(struct kvm_vcpu *vcpu, gva_t vaddr)
 static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu,
 				 struct kvm_mmu_page *sp)
 {
-	int i, offset = 0, r = 0;
-	pt_element_t pt;
+	int i, j, offset, r;
+	pt_element_t pt[256 / sizeof(pt_element_t)];
+	gpa_t pte_gpa;
 
 	if (sp->role.metaphysical
 	    || (PTTYPE == 32 && sp->role.level > PT_PAGE_TABLE_LEVEL)) {
@@ -469,19 +482,20 @@ static void FNAME(prefetch_page)(struct kvm_vcpu *vcpu,
 		return;
 	}
 
-	if (PTTYPE == 32)
+	pte_gpa = gfn_to_gpa(sp->gfn);
+	if (PTTYPE == 32) {
 		offset = sp->role.quadrant << PT64_LEVEL_BITS;
+		pte_gpa += offset * sizeof(pt_element_t);
+	}
 
-	for (i = 0; i < PT64_ENT_PER_PAGE; ++i) {
-		gpa_t pte_gpa = gfn_to_gpa(sp->gfn);
-		pte_gpa += (i+offset) * sizeof(pt_element_t);
-
-		r = kvm_read_guest_atomic(vcpu->kvm, pte_gpa, &pt,
-					  sizeof(pt_element_t));
-		if (r || is_present_pte(pt))
-			sp->spt[i] = shadow_trap_nonpresent_pte;
-		else
-			sp->spt[i] = shadow_notrap_nonpresent_pte;
+	for (i = 0; i < PT64_ENT_PER_PAGE; i += ARRAY_SIZE(pt)) {
+		r = kvm_read_guest_atomic(vcpu->kvm, pte_gpa, pt, sizeof pt);
+		pte_gpa += ARRAY_SIZE(pt) * sizeof(pt_element_t);
+		for (j = 0; j < ARRAY_SIZE(pt); ++j)
+			if (r || is_present_pte(pt[j]))
+				sp->spt[i+j] = shadow_trap_nonpresent_pte;
+			else
+				sp->spt[i+j] = shadow_notrap_nonpresent_pte;
 	}
 }
 
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 6b0d5fa5bab3..e2ee264740c7 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -27,6 +27,8 @@
 
 #include <asm/desc.h>
 
+#define __ex(x) __kvm_handle_fault_on_reboot(x)
+
 MODULE_AUTHOR("Qumranet");
 MODULE_LICENSE("GPL");
 
@@ -129,17 +131,17 @@ static inline void push_irq(struct kvm_vcpu *vcpu, u8 irq)
 
 static inline void clgi(void)
 {
-	asm volatile (SVM_CLGI);
+	asm volatile (__ex(SVM_CLGI));
 }
 
 static inline void stgi(void)
 {
-	asm volatile (SVM_STGI);
+	asm volatile (__ex(SVM_STGI));
 }
 
 static inline void invlpga(unsigned long addr, u32 asid)
 {
-	asm volatile (SVM_INVLPGA :: "a"(addr), "c"(asid));
+	asm volatile (__ex(SVM_INVLPGA) :: "a"(addr), "c"(asid));
 }
 
 static inline unsigned long kvm_read_cr2(void)
@@ -270,19 +272,11 @@ static int has_svm(void)
 
 static void svm_hardware_disable(void *garbage)
 {
-	struct svm_cpu_data *svm_data
-		= per_cpu(svm_data, raw_smp_processor_id());
-
-	if (svm_data) {
-		uint64_t efer;
+	uint64_t efer;
 
-		wrmsrl(MSR_VM_HSAVE_PA, 0);
-		rdmsrl(MSR_EFER, efer);
-		wrmsrl(MSR_EFER, efer & ~MSR_EFER_SVME_MASK);
-		per_cpu(svm_data, raw_smp_processor_id()) = NULL;
-		__free_page(svm_data->save_area);
-		kfree(svm_data);
-	}
+	wrmsrl(MSR_VM_HSAVE_PA, 0);
+	rdmsrl(MSR_EFER, efer);
+	wrmsrl(MSR_EFER, efer & ~MSR_EFER_SVME_MASK);
 }
 
 static void svm_hardware_enable(void *garbage)
@@ -321,6 +315,19 @@ static void svm_hardware_enable(void *garbage)
 	       page_to_pfn(svm_data->save_area) << PAGE_SHIFT);
 }
 
+static void svm_cpu_uninit(int cpu)
+{
+	struct svm_cpu_data *svm_data
+		= per_cpu(svm_data, raw_smp_processor_id());
+
+	if (!svm_data)
+		return;
+
+	per_cpu(svm_data, raw_smp_processor_id()) = NULL;
+	__free_page(svm_data->save_area);
+	kfree(svm_data);
+}
+
 static int svm_cpu_init(int cpu)
 {
 	struct svm_cpu_data *svm_data;
@@ -446,7 +453,8 @@ static __init int svm_hardware_setup(void)
 	if (npt_enabled) {
 		printk(KERN_INFO "kvm: Nested Paging enabled\n");
 		kvm_enable_tdp();
-	}
+	} else
+		kvm_disable_tdp();
 
 	return 0;
 
@@ -458,6 +466,11 @@ err:
 
 static __exit void svm_hardware_unsetup(void)
 {
+	int cpu;
+
+	for_each_online_cpu(cpu)
+		svm_cpu_uninit(cpu);
+
 	__free_pages(pfn_to_page(iopm_base >> PAGE_SHIFT), IOPM_ALLOC_ORDER);
 	iopm_base = 0;
 }
@@ -707,10 +720,6 @@ static void svm_vcpu_put(struct kvm_vcpu *vcpu)
 	rdtscll(vcpu->arch.host_tsc);
 }
 
-static void svm_vcpu_decache(struct kvm_vcpu *vcpu)
-{
-}
-
 static void svm_cache_regs(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -949,7 +958,9 @@ static void new_asid(struct vcpu_svm *svm, struct svm_cpu_data *svm_data)
 
 static unsigned long svm_get_dr(struct kvm_vcpu *vcpu, int dr)
 {
-	return to_svm(vcpu)->db_regs[dr];
+	unsigned long val = to_svm(vcpu)->db_regs[dr];
+	KVMTRACE_2D(DR_READ, vcpu, (u32)dr, (u32)val, handler);
+	return val;
 }
 
 static void svm_set_dr(struct kvm_vcpu *vcpu, int dr, unsigned long value,
@@ -997,13 +1008,28 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	struct kvm *kvm = svm->vcpu.kvm;
 	u64 fault_address;
 	u32 error_code;
+	bool event_injection = false;
 
 	if (!irqchip_in_kernel(kvm) &&
-		is_external_interrupt(exit_int_info))
+	    is_external_interrupt(exit_int_info)) {
+		event_injection = true;
 		push_irq(&svm->vcpu, exit_int_info & SVM_EVTINJ_VEC_MASK);
+	}
 
 	fault_address  = svm->vmcb->control.exit_info_2;
 	error_code = svm->vmcb->control.exit_info_1;
+
+	if (!npt_enabled)
+		KVMTRACE_3D(PAGE_FAULT, &svm->vcpu, error_code,
+			    (u32)fault_address, (u32)(fault_address >> 32),
+			    handler);
+	else
+		KVMTRACE_3D(TDP_FAULT, &svm->vcpu, error_code,
+			    (u32)fault_address, (u32)(fault_address >> 32),
+			    handler);
+
+	if (event_injection)
+		kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address);
 	return kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code);
 }
 
@@ -1081,6 +1107,19 @@ static int io_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	return kvm_emulate_pio(&svm->vcpu, kvm_run, in, size, port);
 }
 
+static int nmi_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+	KVMTRACE_0D(NMI, &svm->vcpu, handler);
+	return 1;
+}
+
+static int intr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
+{
+	++svm->vcpu.stat.irq_exits;
+	KVMTRACE_0D(INTR, &svm->vcpu, handler);
+	return 1;
+}
+
 static int nop_on_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 {
 	return 1;
@@ -1219,6 +1258,9 @@ static int rdmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	if (svm_get_msr(&svm->vcpu, ecx, &data))
 		kvm_inject_gp(&svm->vcpu, 0);
 	else {
+		KVMTRACE_3D(MSR_READ, &svm->vcpu, ecx, (u32)data,
+			    (u32)(data >> 32), handler);
+
 		svm->vmcb->save.rax = data & 0xffffffff;
 		svm->vcpu.arch.regs[VCPU_REGS_RDX] = data >> 32;
 		svm->next_rip = svm->vmcb->save.rip + 2;
@@ -1284,16 +1326,19 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, unsigned ecx, u64 data)
 	case MSR_K7_EVNTSEL1:
 	case MSR_K7_EVNTSEL2:
 	case MSR_K7_EVNTSEL3:
+	case MSR_K7_PERFCTR0:
+	case MSR_K7_PERFCTR1:
+	case MSR_K7_PERFCTR2:
+	case MSR_K7_PERFCTR3:
 		/*
-		 * only support writing 0 to the performance counters for now
-		 * to make Windows happy. Should be replaced by a real
-		 * performance counter emulation later.
+		 * Just discard all writes to the performance counters; this
+		 * should keep both older linux and windows 64-bit guests
+		 * happy
 		 */
-		if (data != 0)
-			goto unhandled;
+		pr_unimpl(vcpu, "unimplemented perfctr wrmsr: 0x%x data 0x%llx\n", ecx, data);
+
 		break;
 	default:
-	unhandled:
 		return kvm_set_msr_common(vcpu, ecx, data);
 	}
 	return 0;
@@ -1304,6 +1349,10 @@ static int wrmsr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 	u32 ecx = svm->vcpu.arch.regs[VCPU_REGS_RCX];
 	u64 data = (svm->vmcb->save.rax & -1u)
 		| ((u64)(svm->vcpu.arch.regs[VCPU_REGS_RDX] & -1u) << 32);
+
+	KVMTRACE_3D(MSR_WRITE, &svm->vcpu, ecx, (u32)data, (u32)(data >> 32),
+		    handler);
+
 	svm->next_rip = svm->vmcb->save.rip + 2;
 	if (svm_set_msr(&svm->vcpu, ecx, data))
 		kvm_inject_gp(&svm->vcpu, 0);
@@ -1323,6 +1372,8 @@ static int msr_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run)
 static int interrupt_window_interception(struct vcpu_svm *svm,
 				   struct kvm_run *kvm_run)
 {
+	KVMTRACE_0D(PEND_INTR, &svm->vcpu, handler);
+
 	svm->vmcb->control.intercept &= ~(1ULL << INTERCEPT_VINTR);
 	svm->vmcb->control.int_ctl &= ~V_IRQ_MASK;
 	/*
@@ -1364,8 +1415,8 @@ static int (*svm_exit_handlers[])(struct vcpu_svm *svm,
 	[SVM_EXIT_EXCP_BASE + PF_VECTOR] 	= pf_interception,
 	[SVM_EXIT_EXCP_BASE + NM_VECTOR] 	= nm_interception,
 	[SVM_EXIT_EXCP_BASE + MC_VECTOR] 	= mc_interception,
-	[SVM_EXIT_INTR] 			= nop_on_interception,
-	[SVM_EXIT_NMI]				= nop_on_interception,
+	[SVM_EXIT_INTR] 			= intr_interception,
+	[SVM_EXIT_NMI]				= nmi_interception,
 	[SVM_EXIT_SMI]				= nop_on_interception,
 	[SVM_EXIT_INIT]				= nop_on_interception,
 	[SVM_EXIT_VINTR]			= interrupt_window_interception,
@@ -1397,6 +1448,9 @@ static int handle_exit(struct kvm_run *kvm_run, struct kvm_vcpu *vcpu)
 	struct vcpu_svm *svm = to_svm(vcpu);
 	u32 exit_code = svm->vmcb->control.exit_code;
 
+	KVMTRACE_3D(VMEXIT, vcpu, exit_code, (u32)svm->vmcb->save.rip,
+		    (u32)((u64)svm->vmcb->save.rip >> 32), entryexit);
+
 	if (npt_enabled) {
 		int mmu_reload = 0;
 		if ((vcpu->arch.cr0 ^ svm->vmcb->save.cr0) & X86_CR0_PG) {
@@ -1470,6 +1524,8 @@ static inline void svm_inject_irq(struct vcpu_svm *svm, int irq)
 {
 	struct vmcb_control_area *control;
 
+	KVMTRACE_1D(INJ_VIRQ, &svm->vcpu, (u32)irq, handler);
+
 	control = &svm->vmcb->control;
 	control->int_vector = irq;
 	control->int_ctl &= ~V_INTR_PRIO_MASK;
@@ -1660,9 +1716,9 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	sync_lapic_to_cr8(vcpu);
 
 	save_host_msrs(vcpu);
-	fs_selector = read_fs();
-	gs_selector = read_gs();
-	ldt_selector = read_ldt();
+	fs_selector = kvm_read_fs();
+	gs_selector = kvm_read_gs();
+	ldt_selector = kvm_read_ldt();
 	svm->host_cr2 = kvm_read_cr2();
 	svm->host_dr6 = read_dr6();
 	svm->host_dr7 = read_dr7();
@@ -1716,17 +1772,17 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		/* Enter guest mode */
 		"push %%rax \n\t"
 		"mov %c[vmcb](%[svm]), %%rax \n\t"
-		SVM_VMLOAD "\n\t"
-		SVM_VMRUN "\n\t"
-		SVM_VMSAVE "\n\t"
+		__ex(SVM_VMLOAD) "\n\t"
+		__ex(SVM_VMRUN) "\n\t"
+		__ex(SVM_VMSAVE) "\n\t"
 		"pop %%rax \n\t"
 #else
 		/* Enter guest mode */
 		"push %%eax \n\t"
 		"mov %c[vmcb](%[svm]), %%eax \n\t"
-		SVM_VMLOAD "\n\t"
-		SVM_VMRUN "\n\t"
-		SVM_VMSAVE "\n\t"
+		__ex(SVM_VMLOAD) "\n\t"
+		__ex(SVM_VMRUN) "\n\t"
+		__ex(SVM_VMSAVE) "\n\t"
 		"pop %%eax \n\t"
 #endif
 
@@ -1795,9 +1851,9 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	write_dr7(svm->host_dr7);
 	kvm_write_cr2(svm->host_cr2);
 
-	load_fs(fs_selector);
-	load_gs(gs_selector);
-	load_ldt(ldt_selector);
+	kvm_load_fs(fs_selector);
+	kvm_load_gs(gs_selector);
+	kvm_load_ldt(ldt_selector);
 	load_host_msrs(vcpu);
 
 	reload_tss(vcpu);
@@ -1889,7 +1945,6 @@ static struct kvm_x86_ops svm_x86_ops = {
 	.prepare_guest_switch = svm_prepare_guest_switch,
 	.vcpu_load = svm_vcpu_load,
 	.vcpu_put = svm_vcpu_put,
-	.vcpu_decache = svm_vcpu_decache,
 
 	.set_guest_debug = svm_guest_debug,
 	.get_msr = svm_get_msr,
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index 540e95179074..2a69773e3b26 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -30,6 +30,8 @@
 #include <asm/io.h>
 #include <asm/desc.h>
 
+#define __ex(x) __kvm_handle_fault_on_reboot(x)
+
 MODULE_AUTHOR("Qumranet");
 MODULE_LICENSE("GPL");
 
@@ -53,6 +55,7 @@ struct vmcs {
 
 struct vcpu_vmx {
 	struct kvm_vcpu       vcpu;
+	struct list_head      local_vcpus_link;
 	int                   launched;
 	u8                    fail;
 	u32                   idt_vectoring_info;
@@ -88,9 +91,11 @@ static inline struct vcpu_vmx *to_vmx(struct kvm_vcpu *vcpu)
 }
 
 static int init_rmode(struct kvm *kvm);
+static u64 construct_eptp(unsigned long root_hpa);
 
 static DEFINE_PER_CPU(struct vmcs *, vmxarea);
 static DEFINE_PER_CPU(struct vmcs *, current_vmcs);
+static DEFINE_PER_CPU(struct list_head, vcpus_on_cpu);
 
 static struct page *vmx_io_bitmap_a;
 static struct page *vmx_io_bitmap_b;
@@ -260,6 +265,11 @@ static inline int cpu_has_vmx_vpid(void)
 		SECONDARY_EXEC_ENABLE_VPID);
 }
 
+static inline int cpu_has_virtual_nmis(void)
+{
+	return vmcs_config.pin_based_exec_ctrl & PIN_BASED_VIRTUAL_NMIS;
+}
+
 static int __find_msr_index(struct vcpu_vmx *vmx, u32 msr)
 {
 	int i;
@@ -278,7 +288,7 @@ static inline void __invvpid(int ext, u16 vpid, gva_t gva)
 	u64 gva;
     } operand = { vpid, 0, gva };
 
-    asm volatile (ASM_VMX_INVVPID
+    asm volatile (__ex(ASM_VMX_INVVPID)
 		  /* CF==1 or ZF==1 --> rc = -1 */
 		  "; ja 1f ; ud2 ; 1:"
 		  : : "a"(&operand), "c"(ext) : "cc", "memory");
@@ -290,7 +300,7 @@ static inline void __invept(int ext, u64 eptp, gpa_t gpa)
 		u64 eptp, gpa;
 	} operand = {eptp, gpa};
 
-	asm volatile (ASM_VMX_INVEPT
+	asm volatile (__ex(ASM_VMX_INVEPT)
 			/* CF==1 or ZF==1 --> rc = -1 */
 			"; ja 1f ; ud2 ; 1:\n"
 			: : "a" (&operand), "c" (ext) : "cc", "memory");
@@ -311,7 +321,7 @@ static void vmcs_clear(struct vmcs *vmcs)
 	u64 phys_addr = __pa(vmcs);
 	u8 error;
 
-	asm volatile (ASM_VMX_VMCLEAR_RAX "; setna %0"
+	asm volatile (__ex(ASM_VMX_VMCLEAR_RAX) "; setna %0"
 		      : "=g"(error) : "a"(&phys_addr), "m"(phys_addr)
 		      : "cc", "memory");
 	if (error)
@@ -329,14 +339,16 @@ static void __vcpu_clear(void *arg)
 	if (per_cpu(current_vmcs, cpu) == vmx->vmcs)
 		per_cpu(current_vmcs, cpu) = NULL;
 	rdtscll(vmx->vcpu.arch.host_tsc);
+	list_del(&vmx->local_vcpus_link);
+	vmx->vcpu.cpu = -1;
+	vmx->launched = 0;
 }
 
 static void vcpu_clear(struct vcpu_vmx *vmx)
 {
 	if (vmx->vcpu.cpu == -1)
 		return;
-	smp_call_function_single(vmx->vcpu.cpu, __vcpu_clear, vmx, 0, 1);
-	vmx->launched = 0;
+	smp_call_function_single(vmx->vcpu.cpu, __vcpu_clear, vmx, 1);
 }
 
 static inline void vpid_sync_vcpu_all(struct vcpu_vmx *vmx)
@@ -378,7 +390,7 @@ static unsigned long vmcs_readl(unsigned long field)
 {
 	unsigned long value;
 
-	asm volatile (ASM_VMX_VMREAD_RDX_RAX
+	asm volatile (__ex(ASM_VMX_VMREAD_RDX_RAX)
 		      : "=a"(value) : "d"(field) : "cc");
 	return value;
 }
@@ -413,7 +425,7 @@ static void vmcs_writel(unsigned long field, unsigned long value)
 {
 	u8 error;
 
-	asm volatile (ASM_VMX_VMWRITE_RAX_RDX "; setna %0"
+	asm volatile (__ex(ASM_VMX_VMWRITE_RAX_RDX) "; setna %0"
 		       : "=q"(error) : "a"(value), "d"(field) : "cc");
 	if (unlikely(error))
 		vmwrite_error(field, value);
@@ -431,10 +443,8 @@ static void vmcs_write32(unsigned long field, u32 value)
 
 static void vmcs_write64(unsigned long field, u64 value)
 {
-#ifdef CONFIG_X86_64
-	vmcs_writel(field, value);
-#else
 	vmcs_writel(field, value);
+#ifndef CONFIG_X86_64
 	asm volatile ("");
 	vmcs_writel(field+1, value >> 32);
 #endif
@@ -474,7 +484,7 @@ static void reload_tss(void)
 	struct descriptor_table gdt;
 	struct desc_struct *descs;
 
-	get_gdt(&gdt);
+	kvm_get_gdt(&gdt);
 	descs = (void *)gdt.base;
 	descs[GDT_ENTRY_TSS].type = 9; /* available TSS */
 	load_TR_desc();
@@ -530,9 +540,9 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu)
 	 * Set host fs and gs selectors.  Unfortunately, 22.2.3 does not
 	 * allow segment selectors with cpl > 0 or ti == 1.
 	 */
-	vmx->host_state.ldt_sel = read_ldt();
+	vmx->host_state.ldt_sel = kvm_read_ldt();
 	vmx->host_state.gs_ldt_reload_needed = vmx->host_state.ldt_sel;
-	vmx->host_state.fs_sel = read_fs();
+	vmx->host_state.fs_sel = kvm_read_fs();
 	if (!(vmx->host_state.fs_sel & 7)) {
 		vmcs_write16(HOST_FS_SELECTOR, vmx->host_state.fs_sel);
 		vmx->host_state.fs_reload_needed = 0;
@@ -540,7 +550,7 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu)
 		vmcs_write16(HOST_FS_SELECTOR, 0);
 		vmx->host_state.fs_reload_needed = 1;
 	}
-	vmx->host_state.gs_sel = read_gs();
+	vmx->host_state.gs_sel = kvm_read_gs();
 	if (!(vmx->host_state.gs_sel & 7))
 		vmcs_write16(HOST_GS_SELECTOR, vmx->host_state.gs_sel);
 	else {
@@ -576,15 +586,15 @@ static void __vmx_load_host_state(struct vcpu_vmx *vmx)
 	++vmx->vcpu.stat.host_state_reload;
 	vmx->host_state.loaded = 0;
 	if (vmx->host_state.fs_reload_needed)
-		load_fs(vmx->host_state.fs_sel);
+		kvm_load_fs(vmx->host_state.fs_sel);
 	if (vmx->host_state.gs_ldt_reload_needed) {
-		load_ldt(vmx->host_state.ldt_sel);
+		kvm_load_ldt(vmx->host_state.ldt_sel);
 		/*
 		 * If we have to reload gs, we must take care to
 		 * preserve our gs base.
 		 */
 		local_irq_save(flags);
-		load_gs(vmx->host_state.gs_sel);
+		kvm_load_gs(vmx->host_state.gs_sel);
 #ifdef CONFIG_X86_64
 		wrmsrl(MSR_GS_BASE, vmcs_readl(HOST_GS_BASE));
 #endif
@@ -617,13 +627,17 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		vcpu_clear(vmx);
 		kvm_migrate_timers(vcpu);
 		vpid_sync_vcpu_all(vmx);
+		local_irq_disable();
+		list_add(&vmx->local_vcpus_link,
+			 &per_cpu(vcpus_on_cpu, cpu));
+		local_irq_enable();
 	}
 
 	if (per_cpu(current_vmcs, cpu) != vmx->vmcs) {
 		u8 error;
 
 		per_cpu(current_vmcs, cpu) = vmx->vmcs;
-		asm volatile (ASM_VMX_VMPTRLD_RAX "; setna %0"
+		asm volatile (__ex(ASM_VMX_VMPTRLD_RAX) "; setna %0"
 			      : "=g"(error) : "a"(&phys_addr), "m"(phys_addr)
 			      : "cc");
 		if (error)
@@ -640,8 +654,8 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		 * Linux uses per-cpu TSS and GDT, so set these when switching
 		 * processors.
 		 */
-		vmcs_writel(HOST_TR_BASE, read_tr_base()); /* 22.2.4 */
-		get_gdt(&dt);
+		vmcs_writel(HOST_TR_BASE, kvm_read_tr_base()); /* 22.2.4 */
+		kvm_get_gdt(&dt);
 		vmcs_writel(HOST_GDTR_BASE, dt.base);   /* 22.2.4 */
 
 		rdmsrl(MSR_IA32_SYSENTER_ESP, sysenter_esp);
@@ -684,11 +698,6 @@ static void vmx_fpu_deactivate(struct kvm_vcpu *vcpu)
 	update_exception_bitmap(vcpu);
 }
 
-static void vmx_vcpu_decache(struct kvm_vcpu *vcpu)
-{
-	vcpu_clear(to_vmx(vcpu));
-}
-
 static unsigned long vmx_get_rflags(struct kvm_vcpu *vcpu)
 {
 	return vmcs_readl(GUEST_RFLAGS);
@@ -913,6 +922,18 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data)
 	case MSR_IA32_TIME_STAMP_COUNTER:
 		guest_write_tsc(data);
 		break;
+	case MSR_P6_PERFCTR0:
+	case MSR_P6_PERFCTR1:
+	case MSR_P6_EVNTSEL0:
+	case MSR_P6_EVNTSEL1:
+		/*
+		 * Just discard all writes to the performance counters; this
+		 * should keep both older linux and windows 64-bit guests
+		 * happy
+		 */
+		pr_unimpl(vcpu, "unimplemented perfctr wrmsr: 0x%x data 0x%llx\n", msr_index, data);
+
+		break;
 	default:
 		vmx_load_host_state(vmx);
 		msr = find_msr_entry(vmx, msr_index);
@@ -1022,6 +1043,7 @@ static void hardware_enable(void *garbage)
 	u64 phys_addr = __pa(per_cpu(vmxarea, cpu));
 	u64 old;
 
+	INIT_LIST_HEAD(&per_cpu(vcpus_on_cpu, cpu));
 	rdmsrl(MSR_IA32_FEATURE_CONTROL, old);
 	if ((old & (MSR_IA32_FEATURE_CONTROL_LOCKED |
 		    MSR_IA32_FEATURE_CONTROL_VMXON_ENABLED))
@@ -1032,13 +1054,25 @@ static void hardware_enable(void *garbage)
 		       MSR_IA32_FEATURE_CONTROL_LOCKED |
 		       MSR_IA32_FEATURE_CONTROL_VMXON_ENABLED);
 	write_cr4(read_cr4() | X86_CR4_VMXE); /* FIXME: not cpu hotplug safe */
-	asm volatile (ASM_VMX_VMXON_RAX : : "a"(&phys_addr), "m"(phys_addr)
+	asm volatile (ASM_VMX_VMXON_RAX
+		      : : "a"(&phys_addr), "m"(phys_addr)
 		      : "memory", "cc");
 }
 
+static void vmclear_local_vcpus(void)
+{
+	int cpu = raw_smp_processor_id();
+	struct vcpu_vmx *vmx, *n;
+
+	list_for_each_entry_safe(vmx, n, &per_cpu(vcpus_on_cpu, cpu),
+				 local_vcpus_link)
+		__vcpu_clear(vmx);
+}
+
 static void hardware_disable(void *garbage)
 {
-	asm volatile (ASM_VMX_VMXOFF : : : "cc");
+	vmclear_local_vcpus();
+	asm volatile (__ex(ASM_VMX_VMXOFF) : : : "cc");
 	write_cr4(read_cr4() & ~X86_CR4_VMXE);
 }
 
@@ -1072,7 +1106,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
 	u32 _vmentry_control = 0;
 
 	min = PIN_BASED_EXT_INTR_MASK | PIN_BASED_NMI_EXITING;
-	opt = 0;
+	opt = PIN_BASED_VIRTUAL_NMIS;
 	if (adjust_vmx_controls(min, opt, MSR_IA32_VMX_PINBASED_CTLS,
 				&_pin_based_exec_control) < 0)
 		return -EIO;
@@ -1389,6 +1423,8 @@ static void exit_lmode(struct kvm_vcpu *vcpu)
 static void vmx_flush_tlb(struct kvm_vcpu *vcpu)
 {
 	vpid_sync_vcpu_all(to_vmx(vcpu));
+	if (vm_need_ept())
+		ept_sync_context(construct_eptp(vcpu->arch.mmu.root_hpa));
 }
 
 static void vmx_decache_cr4_guest_bits(struct kvm_vcpu *vcpu)
@@ -1420,7 +1456,7 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
 	if (!(cr0 & X86_CR0_PG)) {
 		/* From paging/starting to nonpaging */
 		vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
-			     vmcs_config.cpu_based_exec_ctrl |
+			     vmcs_read32(CPU_BASED_VM_EXEC_CONTROL) |
 			     (CPU_BASED_CR3_LOAD_EXITING |
 			      CPU_BASED_CR3_STORE_EXITING));
 		vcpu->arch.cr0 = cr0;
@@ -1430,7 +1466,7 @@ static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
 	} else if (!is_paging(vcpu)) {
 		/* From nonpaging to paging */
 		vmcs_write32(CPU_BASED_VM_EXEC_CONTROL,
-			     vmcs_config.cpu_based_exec_ctrl &
+			     vmcs_read32(CPU_BASED_VM_EXEC_CONTROL) &
 			     ~(CPU_BASED_CR3_LOAD_EXITING |
 			       CPU_BASED_CR3_STORE_EXITING));
 		vcpu->arch.cr0 = cr0;
@@ -1821,7 +1857,7 @@ static void allocate_vpid(struct vcpu_vmx *vmx)
 	spin_unlock(&vmx_vpid_lock);
 }
 
-void vmx_disable_intercept_for_msr(struct page *msr_bitmap, u32 msr)
+static void vmx_disable_intercept_for_msr(struct page *msr_bitmap, u32 msr)
 {
 	void *va;
 
@@ -1907,8 +1943,8 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 	vmcs_write16(HOST_CS_SELECTOR, __KERNEL_CS);  /* 22.2.4 */
 	vmcs_write16(HOST_DS_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
 	vmcs_write16(HOST_ES_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
-	vmcs_write16(HOST_FS_SELECTOR, read_fs());    /* 22.2.4 */
-	vmcs_write16(HOST_GS_SELECTOR, read_gs());    /* 22.2.4 */
+	vmcs_write16(HOST_FS_SELECTOR, kvm_read_fs());    /* 22.2.4 */
+	vmcs_write16(HOST_GS_SELECTOR, kvm_read_gs());    /* 22.2.4 */
 	vmcs_write16(HOST_SS_SELECTOR, __KERNEL_DS);  /* 22.2.4 */
 #ifdef CONFIG_X86_64
 	rdmsrl(MSR_FS_BASE, a);
@@ -1922,7 +1958,7 @@ static int vmx_vcpu_setup(struct vcpu_vmx *vmx)
 
 	vmcs_write16(HOST_TR_SELECTOR, GDT_ENTRY_TSS*8);  /* 22.2.4 */
 
-	get_idt(&dt);
+	kvm_get_idt(&dt);
 	vmcs_writel(HOST_IDTR_BASE, dt.base);   /* 22.2.4 */
 
 	asm("mov $.Lkvm_vmx_return, %0" : "=r"(kvm_vmx_return));
@@ -2114,6 +2150,13 @@ static void vmx_inject_irq(struct kvm_vcpu *vcpu, int irq)
 			irq | INTR_TYPE_EXT_INTR | INTR_INFO_VALID_MASK);
 }
 
+static void vmx_inject_nmi(struct kvm_vcpu *vcpu)
+{
+	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD,
+			INTR_TYPE_NMI_INTR | INTR_INFO_VALID_MASK | NMI_VECTOR);
+	vcpu->arch.nmi_pending = 0;
+}
+
 static void kvm_do_inject_irq(struct kvm_vcpu *vcpu)
 {
 	int word_index = __ffs(vcpu->arch.irq_summary);
@@ -2255,6 +2298,8 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		cr2 = vmcs_readl(EXIT_QUALIFICATION);
 		KVMTRACE_3D(PAGE_FAULT, vcpu, error_code, (u32)cr2,
 			    (u32)((u64)cr2 >> 32), handler);
+		if (vect_info & VECTORING_INFO_VALID_MASK)
+			kvm_mmu_unprotect_page_virt(vcpu, cr2);
 		return kvm_mmu_page_fault(vcpu, cr2, error_code);
 	}
 
@@ -2554,8 +2599,6 @@ static int handle_apic_access(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	exit_qualification = vmcs_read64(EXIT_QUALIFICATION);
 	offset = exit_qualification & 0xffful;
 
-	KVMTRACE_1D(APIC_ACCESS, vcpu, (u32)offset, handler);
-
 	er = emulate_instruction(vcpu, kvm_run, 0, 0, 0);
 
 	if (er !=  EMULATE_DONE) {
@@ -2639,6 +2682,19 @@ static int handle_ept_violation(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	return 1;
 }
 
+static int handle_nmi_window(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
+{
+	u32 cpu_based_vm_exec_control;
+
+	/* clear pending NMI */
+	cpu_based_vm_exec_control = vmcs_read32(CPU_BASED_VM_EXEC_CONTROL);
+	cpu_based_vm_exec_control &= ~CPU_BASED_VIRTUAL_NMI_PENDING;
+	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
+	++vcpu->stat.nmi_window_exits;
+
+	return 1;
+}
+
 /*
  * The exit handlers return 1 if the exit was handled fully and guest execution
  * may resume.  Otherwise they set the kvm_run parameter to indicate what needs
@@ -2649,6 +2705,7 @@ static int (*kvm_vmx_exit_handlers[])(struct kvm_vcpu *vcpu,
 	[EXIT_REASON_EXCEPTION_NMI]           = handle_exception,
 	[EXIT_REASON_EXTERNAL_INTERRUPT]      = handle_external_interrupt,
 	[EXIT_REASON_TRIPLE_FAULT]            = handle_triple_fault,
+	[EXIT_REASON_NMI_WINDOW]	      = handle_nmi_window,
 	[EXIT_REASON_IO_INSTRUCTION]          = handle_io,
 	[EXIT_REASON_CR_ACCESS]               = handle_cr,
 	[EXIT_REASON_DR_ACCESS]               = handle_dr,
@@ -2736,17 +2793,52 @@ static void enable_irq_window(struct kvm_vcpu *vcpu)
 	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
 }
 
+static void enable_nmi_window(struct kvm_vcpu *vcpu)
+{
+	u32 cpu_based_vm_exec_control;
+
+	if (!cpu_has_virtual_nmis())
+		return;
+
+	cpu_based_vm_exec_control = vmcs_read32(CPU_BASED_VM_EXEC_CONTROL);
+	cpu_based_vm_exec_control |= CPU_BASED_VIRTUAL_NMI_PENDING;
+	vmcs_write32(CPU_BASED_VM_EXEC_CONTROL, cpu_based_vm_exec_control);
+}
+
+static int vmx_nmi_enabled(struct kvm_vcpu *vcpu)
+{
+	u32 guest_intr = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO);
+	return !(guest_intr & (GUEST_INTR_STATE_NMI |
+			       GUEST_INTR_STATE_MOV_SS |
+			       GUEST_INTR_STATE_STI));
+}
+
+static int vmx_irq_enabled(struct kvm_vcpu *vcpu)
+{
+	u32 guest_intr = vmcs_read32(GUEST_INTERRUPTIBILITY_INFO);
+	return (!(guest_intr & (GUEST_INTR_STATE_MOV_SS |
+			       GUEST_INTR_STATE_STI)) &&
+		(vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF));
+}
+
+static void enable_intr_window(struct kvm_vcpu *vcpu)
+{
+	if (vcpu->arch.nmi_pending)
+		enable_nmi_window(vcpu);
+	else if (kvm_cpu_has_interrupt(vcpu))
+		enable_irq_window(vcpu);
+}
+
 static void vmx_intr_assist(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	u32 idtv_info_field, intr_info_field;
-	int has_ext_irq, interrupt_window_open;
+	u32 idtv_info_field, intr_info_field, exit_intr_info_field;
 	int vector;
 
 	update_tpr_threshold(vcpu);
 
-	has_ext_irq = kvm_cpu_has_interrupt(vcpu);
 	intr_info_field = vmcs_read32(VM_ENTRY_INTR_INFO_FIELD);
+	exit_intr_info_field = vmcs_read32(VM_EXIT_INTR_INFO);
 	idtv_info_field = vmx->idt_vectoring_info;
 	if (intr_info_field & INTR_INFO_VALID_MASK) {
 		if (idtv_info_field & INTR_INFO_VALID_MASK) {
@@ -2754,8 +2846,7 @@ static void vmx_intr_assist(struct kvm_vcpu *vcpu)
 			if (printk_ratelimit())
 				printk(KERN_ERR "Fault when IDT_Vectoring\n");
 		}
-		if (has_ext_irq)
-			enable_irq_window(vcpu);
+		enable_intr_window(vcpu);
 		return;
 	}
 	if (unlikely(idtv_info_field & INTR_INFO_VALID_MASK)) {
@@ -2765,30 +2856,56 @@ static void vmx_intr_assist(struct kvm_vcpu *vcpu)
 			u8 vect = idtv_info_field & VECTORING_INFO_VECTOR_MASK;
 
 			vmx_inject_irq(vcpu, vect);
-			if (unlikely(has_ext_irq))
-				enable_irq_window(vcpu);
+			enable_intr_window(vcpu);
 			return;
 		}
 
 		KVMTRACE_1D(REDELIVER_EVT, vcpu, idtv_info_field, handler);
 
-		vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, idtv_info_field);
+		/*
+		 * SDM 3: 25.7.1.2
+		 * Clear bit "block by NMI" before VM entry if a NMI delivery
+		 * faulted.
+		 */
+		if ((idtv_info_field & VECTORING_INFO_TYPE_MASK)
+		    == INTR_TYPE_NMI_INTR && cpu_has_virtual_nmis())
+			vmcs_write32(GUEST_INTERRUPTIBILITY_INFO,
+				vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
+				~GUEST_INTR_STATE_NMI);
+
+		vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, idtv_info_field
+				& ~INTR_INFO_RESVD_BITS_MASK);
 		vmcs_write32(VM_ENTRY_INSTRUCTION_LEN,
 				vmcs_read32(VM_EXIT_INSTRUCTION_LEN));
 
 		if (unlikely(idtv_info_field & INTR_INFO_DELIVER_CODE_MASK))
 			vmcs_write32(VM_ENTRY_EXCEPTION_ERROR_CODE,
 				vmcs_read32(IDT_VECTORING_ERROR_CODE));
-		if (unlikely(has_ext_irq))
-			enable_irq_window(vcpu);
+		enable_intr_window(vcpu);
 		return;
 	}
-	if (!has_ext_irq)
+	if (cpu_has_virtual_nmis()) {
+		/*
+		 * SDM 3: 25.7.1.2
+		 * Re-set bit "block by NMI" before VM entry if vmexit caused by
+		 * a guest IRET fault.
+		 */
+		if ((exit_intr_info_field & INTR_INFO_UNBLOCK_NMI) &&
+		    (exit_intr_info_field & INTR_INFO_VECTOR_MASK) != 8)
+			vmcs_write32(GUEST_INTERRUPTIBILITY_INFO,
+				vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) |
+				GUEST_INTR_STATE_NMI);
+		else if (vcpu->arch.nmi_pending) {
+			if (vmx_nmi_enabled(vcpu))
+				vmx_inject_nmi(vcpu);
+			enable_intr_window(vcpu);
+			return;
+		}
+
+	}
+	if (!kvm_cpu_has_interrupt(vcpu))
 		return;
-	interrupt_window_open =
-		((vmcs_readl(GUEST_RFLAGS) & X86_EFLAGS_IF) &&
-		 (vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & 3) == 0);
-	if (interrupt_window_open) {
+	if (vmx_irq_enabled(vcpu)) {
 		vector = kvm_cpu_get_interrupt(vcpu);
 		vmx_inject_irq(vcpu, vector);
 		kvm_timer_intr_post(vcpu, vector);
@@ -2838,7 +2955,7 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		"push %%edx; push %%ebp;"
 		"push %%ecx \n\t"
 #endif
-		ASM_VMX_VMWRITE_RSP_RDX "\n\t"
+		__ex(ASM_VMX_VMWRITE_RSP_RDX) "\n\t"
 		/* Check if vmlaunch of vmresume is needed */
 		"cmpl $0, %c[launched](%0) \n\t"
 		/* Load guest registers.  Don't clobber flags. */
@@ -2873,9 +2990,9 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 #endif
 		/* Enter guest mode */
 		"jne .Llaunched \n\t"
-		ASM_VMX_VMLAUNCH "\n\t"
+		__ex(ASM_VMX_VMLAUNCH) "\n\t"
 		"jmp .Lkvm_vmx_return \n\t"
-		".Llaunched: " ASM_VMX_VMRESUME "\n\t"
+		".Llaunched: " __ex(ASM_VMX_VMRESUME) "\n\t"
 		".Lkvm_vmx_return: "
 		/* Save guest registers, load host registers, keep flags */
 #ifdef CONFIG_X86_64
@@ -2949,7 +3066,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 		fixup_rmode_irq(vmx);
 
 	vcpu->arch.interrupt_window_open =
-		(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) & 3) == 0;
+		(vmcs_read32(GUEST_INTERRUPTIBILITY_INFO) &
+		 (GUEST_INTR_STATE_STI | GUEST_INTR_STATE_MOV_SS)) == 0;
 
 	asm("mov %0, %%ds; mov %0, %%es" : : "r"(__USER_DS));
 	vmx->launched = 1;
@@ -2957,7 +3075,8 @@ static void vmx_vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 	intr_info = vmcs_read32(VM_EXIT_INTR_INFO);
 
 	/* We need to handle NMIs before interrupts are enabled */
-	if ((intr_info & INTR_INFO_INTR_TYPE_MASK) == 0x200) { /* nmi */
+	if ((intr_info & INTR_INFO_INTR_TYPE_MASK) == 0x200 &&
+	    (intr_info & INTR_INFO_VALID_MASK)) {
 		KVMTRACE_0D(NMI, vcpu, handler);
 		asm("int $2");
 	}
@@ -2968,7 +3087,7 @@ static void vmx_free_vmcs(struct kvm_vcpu *vcpu)
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
 	if (vmx->vmcs) {
-		on_each_cpu(__vcpu_clear, vmx, 0, 1);
+		vcpu_clear(vmx);
 		free_vmcs(vmx->vmcs);
 		vmx->vmcs = NULL;
 	}
@@ -2999,15 +3118,6 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id)
 		return ERR_PTR(-ENOMEM);
 
 	allocate_vpid(vmx);
-	if (id == 0 && vm_need_ept()) {
-		kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
-			VMX_EPT_WRITABLE_MASK |
-			VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
-		kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
-				VMX_EPT_FAKE_DIRTY_MASK, 0ull,
-				VMX_EPT_EXECUTABLE_MASK);
-		kvm_enable_tdp();
-	}
 
 	err = kvm_vcpu_init(&vmx->vcpu, kvm, id);
 	if (err)
@@ -3095,7 +3205,6 @@ static struct kvm_x86_ops vmx_x86_ops = {
 	.prepare_guest_switch = vmx_save_host_state,
 	.vcpu_load = vmx_vcpu_load,
 	.vcpu_put = vmx_vcpu_put,
-	.vcpu_decache = vmx_vcpu_decache,
 
 	.set_guest_debug = set_guest_debug,
 	.guest_debug_pre = kvm_guest_debug_pre,
@@ -3187,8 +3296,17 @@ static int __init vmx_init(void)
 	vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_ESP);
 	vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_EIP);
 
-	if (cpu_has_vmx_ept())
+	if (vm_need_ept()) {
 		bypass_guest_pf = 0;
+		kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK |
+			VMX_EPT_WRITABLE_MASK |
+			VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT);
+		kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK,
+				VMX_EPT_FAKE_DIRTY_MASK, 0ull,
+				VMX_EPT_EXECUTABLE_MASK);
+		kvm_enable_tdp();
+	} else
+		kvm_disable_tdp();
 
 	if (bypass_guest_pf)
 		kvm_mmu_set_nonpresent_ptes(~0xffeull, 0ull);
diff --git a/arch/x86/kvm/vmx.h b/arch/x86/kvm/vmx.h
index 79d94c610dfe..425a13436b3f 100644
--- a/arch/x86/kvm/vmx.h
+++ b/arch/x86/kvm/vmx.h
@@ -40,6 +40,7 @@
 #define CPU_BASED_CR8_LOAD_EXITING              0x00080000
 #define CPU_BASED_CR8_STORE_EXITING             0x00100000
 #define CPU_BASED_TPR_SHADOW                    0x00200000
+#define CPU_BASED_VIRTUAL_NMI_PENDING		0x00400000
 #define CPU_BASED_MOV_DR_EXITING                0x00800000
 #define CPU_BASED_UNCOND_IO_EXITING             0x01000000
 #define CPU_BASED_USE_IO_BITMAPS                0x02000000
@@ -216,7 +217,7 @@ enum vmcs_field {
 #define EXIT_REASON_TRIPLE_FAULT        2
 
 #define EXIT_REASON_PENDING_INTERRUPT   7
-
+#define EXIT_REASON_NMI_WINDOW		8
 #define EXIT_REASON_TASK_SWITCH         9
 #define EXIT_REASON_CPUID               10
 #define EXIT_REASON_HLT                 12
@@ -251,7 +252,9 @@ enum vmcs_field {
 #define INTR_INFO_VECTOR_MASK           0xff            /* 7:0 */
 #define INTR_INFO_INTR_TYPE_MASK        0x700           /* 10:8 */
 #define INTR_INFO_DELIVER_CODE_MASK     0x800           /* 11 */
+#define INTR_INFO_UNBLOCK_NMI		0x1000		/* 12 */
 #define INTR_INFO_VALID_MASK            0x80000000      /* 31 */
+#define INTR_INFO_RESVD_BITS_MASK       0x7ffff000
 
 #define VECTORING_INFO_VECTOR_MASK           	INTR_INFO_VECTOR_MASK
 #define VECTORING_INFO_TYPE_MASK        	INTR_INFO_INTR_TYPE_MASK
@@ -259,9 +262,16 @@ enum vmcs_field {
 #define VECTORING_INFO_VALID_MASK       	INTR_INFO_VALID_MASK
 
 #define INTR_TYPE_EXT_INTR              (0 << 8) /* external interrupt */
+#define INTR_TYPE_NMI_INTR		(2 << 8) /* NMI */
 #define INTR_TYPE_EXCEPTION             (3 << 8) /* processor exception */
 #define INTR_TYPE_SOFT_INTR             (4 << 8) /* software interrupt */
 
+/* GUEST_INTERRUPTIBILITY_INFO flags. */
+#define GUEST_INTR_STATE_STI		0x00000001
+#define GUEST_INTR_STATE_MOV_SS		0x00000002
+#define GUEST_INTR_STATE_SMI		0x00000004
+#define GUEST_INTR_STATE_NMI		0x00000008
+
 /*
  * Exit Qualifications for MOV for Control Register Access
  */
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 63a77caa59f1..0d682fc6aeb3 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -72,6 +72,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = {
 	{ "mmio_exits", VCPU_STAT(mmio_exits) },
 	{ "signal_exits", VCPU_STAT(signal_exits) },
 	{ "irq_window", VCPU_STAT(irq_window_exits) },
+	{ "nmi_window", VCPU_STAT(nmi_window_exits) },
 	{ "halt_exits", VCPU_STAT(halt_exits) },
 	{ "halt_wakeup", VCPU_STAT(halt_wakeup) },
 	{ "hypercalls", VCPU_STAT(hypercalls) },
@@ -173,6 +174,12 @@ void kvm_inject_page_fault(struct kvm_vcpu *vcpu, unsigned long addr,
 	kvm_queue_exception_e(vcpu, PF_VECTOR, error_code);
 }
 
+void kvm_inject_nmi(struct kvm_vcpu *vcpu)
+{
+	vcpu->arch.nmi_pending = 1;
+}
+EXPORT_SYMBOL_GPL(kvm_inject_nmi);
+
 void kvm_queue_exception_e(struct kvm_vcpu *vcpu, unsigned nr, u32 error_code)
 {
 	WARN_ON(vcpu->arch.exception.pending);
@@ -604,6 +611,38 @@ static void kvm_write_guest_time(struct kvm_vcpu *v)
 	mark_page_dirty(v->kvm, vcpu->time >> PAGE_SHIFT);
 }
 
+static bool msr_mtrr_valid(unsigned msr)
+{
+	switch (msr) {
+	case 0x200 ... 0x200 + 2 * KVM_NR_VAR_MTRR - 1:
+	case MSR_MTRRfix64K_00000:
+	case MSR_MTRRfix16K_80000:
+	case MSR_MTRRfix16K_A0000:
+	case MSR_MTRRfix4K_C0000:
+	case MSR_MTRRfix4K_C8000:
+	case MSR_MTRRfix4K_D0000:
+	case MSR_MTRRfix4K_D8000:
+	case MSR_MTRRfix4K_E0000:
+	case MSR_MTRRfix4K_E8000:
+	case MSR_MTRRfix4K_F0000:
+	case MSR_MTRRfix4K_F8000:
+	case MSR_MTRRdefType:
+	case MSR_IA32_CR_PAT:
+		return true;
+	case 0x2f8:
+		return true;
+	}
+	return false;
+}
+
+static int set_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 data)
+{
+	if (!msr_mtrr_valid(msr))
+		return 1;
+
+	vcpu->arch.mtrr[msr - 0x200] = data;
+	return 0;
+}
 
 int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 {
@@ -625,8 +664,9 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data)
 		break;
 	case MSR_IA32_UCODE_REV:
 	case MSR_IA32_UCODE_WRITE:
-	case 0x200 ... 0x2ff: /* MTRRs */
 		break;
+	case 0x200 ... 0x2ff:
+		return set_msr_mtrr(vcpu, msr, data);
 	case MSR_IA32_APICBASE:
 		kvm_set_apic_base(vcpu, data);
 		break;
@@ -684,6 +724,15 @@ int kvm_get_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 *pdata)
 	return kvm_x86_ops->get_msr(vcpu, msr_index, pdata);
 }
 
+static int get_msr_mtrr(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
+{
+	if (!msr_mtrr_valid(msr))
+		return 1;
+
+	*pdata = vcpu->arch.mtrr[msr - 0x200];
+	return 0;
+}
+
 int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 {
 	u64 data;
@@ -705,11 +754,13 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 *pdata)
 	case MSR_IA32_MC0_MISC+16:
 	case MSR_IA32_UCODE_REV:
 	case MSR_IA32_EBL_CR_POWERON:
-		/* MTRR registers */
-	case 0xfe:
-	case 0x200 ... 0x2ff:
 		data = 0;
 		break;
+	case MSR_MTRRcap:
+		data = 0x500 | KVM_NR_VAR_MTRR;
+		break;
+	case 0x200 ... 0x2ff:
+		return get_msr_mtrr(vcpu, msr, pdata);
 	case 0xcd: /* fsb frequency */
 		data = 3;
 		break;
@@ -817,41 +868,6 @@ out:
 	return r;
 }
 
-/*
- * Make sure that a cpu that is being hot-unplugged does not have any vcpus
- * cached on it.
- */
-void decache_vcpus_on_cpu(int cpu)
-{
-	struct kvm *vm;
-	struct kvm_vcpu *vcpu;
-	int i;
-
-	spin_lock(&kvm_lock);
-	list_for_each_entry(vm, &vm_list, vm_list)
-		for (i = 0; i < KVM_MAX_VCPUS; ++i) {
-			vcpu = vm->vcpus[i];
-			if (!vcpu)
-				continue;
-			/*
-			 * If the vcpu is locked, then it is running on some
-			 * other cpu and therefore it is not cached on the
-			 * cpu in question.
-			 *
-			 * If it's not locked, check the last cpu it executed
-			 * on.
-			 */
-			if (mutex_trylock(&vcpu->mutex)) {
-				if (vcpu->cpu == cpu) {
-					kvm_x86_ops->vcpu_decache(vcpu);
-					vcpu->cpu = -1;
-				}
-				mutex_unlock(&vcpu->mutex);
-			}
-		}
-	spin_unlock(&kvm_lock);
-}
-
 int kvm_dev_ioctl_check_extension(long ext)
 {
 	int r;
@@ -867,8 +883,12 @@ int kvm_dev_ioctl_check_extension(long ext)
 	case KVM_CAP_PIT:
 	case KVM_CAP_NOP_IO_DELAY:
 	case KVM_CAP_MP_STATE:
+	case KVM_CAP_SYNC_MMU:
 		r = 1;
 		break;
+	case KVM_CAP_COALESCED_MMIO:
+		r = KVM_COALESCED_MMIO_PAGE_OFFSET;
+		break;
 	case KVM_CAP_VAPIC:
 		r = !kvm_x86_ops->cpu_has_accelerated_tpr();
 		break;
@@ -1476,6 +1496,7 @@ static int kvm_vm_ioctl_set_memory_alias(struct kvm *kvm,
 		goto out;
 
 	down_write(&kvm->slots_lock);
+	spin_lock(&kvm->mmu_lock);
 
 	p = &kvm->arch.aliases[alias->slot];
 	p->base_gfn = alias->guest_phys_addr >> PAGE_SHIFT;
@@ -1487,6 +1508,7 @@ static int kvm_vm_ioctl_set_memory_alias(struct kvm *kvm,
 			break;
 	kvm->arch.naliases = n;
 
+	spin_unlock(&kvm->mmu_lock);
 	kvm_mmu_zap_all(kvm);
 
 	up_write(&kvm->slots_lock);
@@ -1781,13 +1803,14 @@ static void kvm_init_msr_list(void)
  * Only apic need an MMIO device hook, so shortcut now..
  */
 static struct kvm_io_device *vcpu_find_pervcpu_dev(struct kvm_vcpu *vcpu,
-						gpa_t addr)
+						gpa_t addr, int len,
+						int is_write)
 {
 	struct kvm_io_device *dev;
 
 	if (vcpu->arch.apic) {
 		dev = &vcpu->arch.apic->dev;
-		if (dev->in_range(dev, addr))
+		if (dev->in_range(dev, addr, len, is_write))
 			return dev;
 	}
 	return NULL;
@@ -1795,13 +1818,15 @@ static struct kvm_io_device *vcpu_find_pervcpu_dev(struct kvm_vcpu *vcpu,
 
 
 static struct kvm_io_device *vcpu_find_mmio_dev(struct kvm_vcpu *vcpu,
-						gpa_t addr)
+						gpa_t addr, int len,
+						int is_write)
 {
 	struct kvm_io_device *dev;
 
-	dev = vcpu_find_pervcpu_dev(vcpu, addr);
+	dev = vcpu_find_pervcpu_dev(vcpu, addr, len, is_write);
 	if (dev == NULL)
-		dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr);
+		dev = kvm_io_bus_find_dev(&vcpu->kvm->mmio_bus, addr, len,
+					  is_write);
 	return dev;
 }
 
@@ -1869,7 +1894,7 @@ mmio:
 	 * Is this MMIO handled locally?
 	 */
 	mutex_lock(&vcpu->kvm->lock);
-	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa);
+	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 0);
 	if (mmio_dev) {
 		kvm_iodevice_read(mmio_dev, gpa, bytes, val);
 		mutex_unlock(&vcpu->kvm->lock);
@@ -1924,7 +1949,7 @@ mmio:
 	 * Is this MMIO handled locally?
 	 */
 	mutex_lock(&vcpu->kvm->lock);
-	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa);
+	mmio_dev = vcpu_find_mmio_dev(vcpu, gpa, bytes, 1);
 	if (mmio_dev) {
 		kvm_iodevice_write(mmio_dev, gpa, bytes, val);
 		mutex_unlock(&vcpu->kvm->lock);
@@ -2020,6 +2045,7 @@ int emulate_invlpg(struct kvm_vcpu *vcpu, gva_t address)
 
 int emulate_clts(struct kvm_vcpu *vcpu)
 {
+	KVMTRACE_0D(CLTS, vcpu, handler);
 	kvm_x86_ops->set_cr0(vcpu, vcpu->arch.cr0 & ~X86_CR0_TS);
 	return X86EMUL_CONTINUE;
 }
@@ -2053,21 +2079,19 @@ int emulator_set_dr(struct x86_emulate_ctxt *ctxt, int dr, unsigned long value)
 
 void kvm_report_emulation_failure(struct kvm_vcpu *vcpu, const char *context)
 {
-	static int reported;
 	u8 opcodes[4];
 	unsigned long rip = vcpu->arch.rip;
 	unsigned long rip_linear;
 
-	rip_linear = rip + get_segment_base(vcpu, VCPU_SREG_CS);
-
-	if (reported)
+	if (!printk_ratelimit())
 		return;
 
+	rip_linear = rip + get_segment_base(vcpu, VCPU_SREG_CS);
+
 	emulator_read_std(rip_linear, (void *)opcodes, 4, vcpu);
 
 	printk(KERN_ERR "emulation failed (%s) rip %lx %02x %02x %02x %02x\n",
 	       context, rip, opcodes[0], opcodes[1], opcodes[2], opcodes[3]);
-	reported = 1;
 }
 EXPORT_SYMBOL_GPL(kvm_report_emulation_failure);
 
@@ -2105,27 +2129,6 @@ int emulate_instruction(struct kvm_vcpu *vcpu,
 			? X86EMUL_MODE_PROT64 :	cs_db
 			? X86EMUL_MODE_PROT32 : X86EMUL_MODE_PROT16;
 
-		if (vcpu->arch.emulate_ctxt.mode == X86EMUL_MODE_PROT64) {
-			vcpu->arch.emulate_ctxt.cs_base = 0;
-			vcpu->arch.emulate_ctxt.ds_base = 0;
-			vcpu->arch.emulate_ctxt.es_base = 0;
-			vcpu->arch.emulate_ctxt.ss_base = 0;
-		} else {
-			vcpu->arch.emulate_ctxt.cs_base =
-					get_segment_base(vcpu, VCPU_SREG_CS);
-			vcpu->arch.emulate_ctxt.ds_base =
-					get_segment_base(vcpu, VCPU_SREG_DS);
-			vcpu->arch.emulate_ctxt.es_base =
-					get_segment_base(vcpu, VCPU_SREG_ES);
-			vcpu->arch.emulate_ctxt.ss_base =
-					get_segment_base(vcpu, VCPU_SREG_SS);
-		}
-
-		vcpu->arch.emulate_ctxt.gs_base =
-					get_segment_base(vcpu, VCPU_SREG_GS);
-		vcpu->arch.emulate_ctxt.fs_base =
-					get_segment_base(vcpu, VCPU_SREG_FS);
-
 		r = x86_decode_insn(&vcpu->arch.emulate_ctxt, &emulate_ops);
 
 		/* Reject the instructions other than VMCALL/VMMCALL when
@@ -2300,9 +2303,10 @@ static void pio_string_write(struct kvm_io_device *pio_dev,
 }
 
 static struct kvm_io_device *vcpu_find_pio_dev(struct kvm_vcpu *vcpu,
-					       gpa_t addr)
+					       gpa_t addr, int len,
+					       int is_write)
 {
-	return kvm_io_bus_find_dev(&vcpu->kvm->pio_bus, addr);
+	return kvm_io_bus_find_dev(&vcpu->kvm->pio_bus, addr, len, is_write);
 }
 
 int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
@@ -2331,11 +2335,10 @@ int kvm_emulate_pio(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 
 	kvm_x86_ops->cache_regs(vcpu);
 	memcpy(vcpu->arch.pio_data, &vcpu->arch.regs[VCPU_REGS_RAX], 4);
-	kvm_x86_ops->decache_regs(vcpu);
 
 	kvm_x86_ops->skip_emulated_instruction(vcpu);
 
-	pio_dev = vcpu_find_pio_dev(vcpu, port);
+	pio_dev = vcpu_find_pio_dev(vcpu, port, size, !in);
 	if (pio_dev) {
 		kernel_pio(pio_dev, vcpu, vcpu->arch.pio_data);
 		complete_pio(vcpu);
@@ -2417,7 +2420,9 @@ int kvm_emulate_pio_string(struct kvm_vcpu *vcpu, struct kvm_run *run, int in,
 		}
 	}
 
-	pio_dev = vcpu_find_pio_dev(vcpu, port);
+	pio_dev = vcpu_find_pio_dev(vcpu, port,
+				    vcpu->arch.pio.cur_count,
+				    !vcpu->arch.pio.in);
 	if (!vcpu->arch.pio.in) {
 		/* string PIO write */
 		ret = pio_copy_data(vcpu);
@@ -2600,27 +2605,41 @@ void realmode_lmsw(struct kvm_vcpu *vcpu, unsigned long msw,
 
 unsigned long realmode_get_cr(struct kvm_vcpu *vcpu, int cr)
 {
+	unsigned long value;
+
 	kvm_x86_ops->decache_cr4_guest_bits(vcpu);
 	switch (cr) {
 	case 0:
-		return vcpu->arch.cr0;
+		value = vcpu->arch.cr0;
+		break;
 	case 2:
-		return vcpu->arch.cr2;
+		value = vcpu->arch.cr2;
+		break;
 	case 3:
-		return vcpu->arch.cr3;
+		value = vcpu->arch.cr3;
+		break;
 	case 4:
-		return vcpu->arch.cr4;
+		value = vcpu->arch.cr4;
+		break;
 	case 8:
-		return kvm_get_cr8(vcpu);
+		value = kvm_get_cr8(vcpu);
+		break;
 	default:
 		vcpu_printf(vcpu, "%s: unexpected cr %u\n", __func__, cr);
 		return 0;
 	}
+	KVMTRACE_3D(CR_READ, vcpu, (u32)cr, (u32)value,
+		    (u32)((u64)value >> 32), handler);
+
+	return value;
 }
 
 void realmode_set_cr(struct kvm_vcpu *vcpu, int cr, unsigned long val,
 		     unsigned long *rflags)
 {
+	KVMTRACE_3D(CR_WRITE, vcpu, (u32)cr, (u32)val,
+		    (u32)((u64)val >> 32), handler);
+
 	switch (cr) {
 	case 0:
 		kvm_set_cr0(vcpu, mk_cr_64(vcpu->arch.cr0, val));
@@ -2771,8 +2790,10 @@ static void vapic_exit(struct kvm_vcpu *vcpu)
 	if (!apic || !apic->vapic_addr)
 		return;
 
+	down_read(&vcpu->kvm->slots_lock);
 	kvm_release_page_dirty(apic->vapic_page);
 	mark_page_dirty(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT);
+	up_read(&vcpu->kvm->slots_lock);
 }
 
 static int __vcpu_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
@@ -2928,9 +2949,7 @@ out:
 
 	post_kvm_run_save(vcpu, kvm_run);
 
-	down_read(&vcpu->kvm->slots_lock);
 	vapic_exit(vcpu);
-	up_read(&vcpu->kvm->slots_lock);
 
 	return r;
 }
@@ -2942,15 +2961,15 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run)
 
 	vcpu_load(vcpu);
 
+	if (vcpu->sigset_active)
+		sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
+
 	if (unlikely(vcpu->arch.mp_state == KVM_MP_STATE_UNINITIALIZED)) {
 		kvm_vcpu_block(vcpu);
-		vcpu_put(vcpu);
-		return -EAGAIN;
+		r = -EAGAIN;
+		goto out;
 	}
 
-	if (vcpu->sigset_active)
-		sigprocmask(SIG_SETMASK, &vcpu->sigset, &sigsaved);
-
 	/* re-sync apic's tpr */
 	if (!irqchip_in_kernel(vcpu->kvm))
 		kvm_set_cr8(vcpu, kvm_run->cr8);
@@ -3070,8 +3089,8 @@ int kvm_arch_vcpu_ioctl_set_regs(struct kvm_vcpu *vcpu, struct kvm_regs *regs)
 	return 0;
 }
 
-static void get_segment(struct kvm_vcpu *vcpu,
-			struct kvm_segment *var, int seg)
+void kvm_get_segment(struct kvm_vcpu *vcpu,
+		     struct kvm_segment *var, int seg)
 {
 	kvm_x86_ops->get_segment(vcpu, var, seg);
 }
@@ -3080,7 +3099,7 @@ void kvm_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l)
 {
 	struct kvm_segment cs;
 
-	get_segment(vcpu, &cs, VCPU_SREG_CS);
+	kvm_get_segment(vcpu, &cs, VCPU_SREG_CS);
 	*db = cs.db;
 	*l = cs.l;
 }
@@ -3094,15 +3113,15 @@ int kvm_arch_vcpu_ioctl_get_sregs(struct kvm_vcpu *vcpu,
 
 	vcpu_load(vcpu);
 
-	get_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
-	get_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
-	get_segment(vcpu, &sregs->es, VCPU_SREG_ES);
-	get_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
-	get_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
-	get_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
+	kvm_get_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
+	kvm_get_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
+	kvm_get_segment(vcpu, &sregs->es, VCPU_SREG_ES);
+	kvm_get_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
+	kvm_get_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
+	kvm_get_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
 
-	get_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
-	get_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
+	kvm_get_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
+	kvm_get_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
 
 	kvm_x86_ops->get_idt(vcpu, &dt);
 	sregs->idt.limit = dt.limit;
@@ -3154,7 +3173,7 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
-static void set_segment(struct kvm_vcpu *vcpu,
+static void kvm_set_segment(struct kvm_vcpu *vcpu,
 			struct kvm_segment *var, int seg)
 {
 	kvm_x86_ops->set_segment(vcpu, var, seg);
@@ -3168,6 +3187,10 @@ static void seg_desct_to_kvm_desct(struct desc_struct *seg_desc, u16 selector,
 	kvm_desct->base |= seg_desc->base2 << 24;
 	kvm_desct->limit = seg_desc->limit0;
 	kvm_desct->limit |= seg_desc->limit << 16;
+	if (seg_desc->g) {
+		kvm_desct->limit <<= 12;
+		kvm_desct->limit |= 0xfff;
+	}
 	kvm_desct->selector = selector;
 	kvm_desct->type = seg_desc->type;
 	kvm_desct->present = seg_desc->p;
@@ -3191,7 +3214,7 @@ static void get_segment_descritptor_dtable(struct kvm_vcpu *vcpu,
 	if (selector & 1 << 2) {
 		struct kvm_segment kvm_seg;
 
-		get_segment(vcpu, &kvm_seg, VCPU_SREG_LDTR);
+		kvm_get_segment(vcpu, &kvm_seg, VCPU_SREG_LDTR);
 
 		if (kvm_seg.unusable)
 			dtable->limit = 0;
@@ -3207,6 +3230,7 @@ static void get_segment_descritptor_dtable(struct kvm_vcpu *vcpu,
 static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 					 struct desc_struct *seg_desc)
 {
+	gpa_t gpa;
 	struct descriptor_table dtable;
 	u16 index = selector >> 3;
 
@@ -3216,13 +3240,16 @@ static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 		kvm_queue_exception_e(vcpu, GP_VECTOR, selector & 0xfffc);
 		return 1;
 	}
-	return kvm_read_guest(vcpu->kvm, dtable.base + index * 8, seg_desc, 8);
+	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base);
+	gpa += index * 8;
+	return kvm_read_guest(vcpu->kvm, gpa, seg_desc, 8);
 }
 
 /* allowed just for 8 bytes segments */
 static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 					 struct desc_struct *seg_desc)
 {
+	gpa_t gpa;
 	struct descriptor_table dtable;
 	u16 index = selector >> 3;
 
@@ -3230,7 +3257,9 @@ static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 
 	if (dtable.limit < index * 8 + 7)
 		return 1;
-	return kvm_write_guest(vcpu->kvm, dtable.base + index * 8, seg_desc, 8);
+	gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base);
+	gpa += index * 8;
+	return kvm_write_guest(vcpu->kvm, gpa, seg_desc, 8);
 }
 
 static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
@@ -3242,62 +3271,14 @@ static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
 	base_addr |= (seg_desc->base1 << 16);
 	base_addr |= (seg_desc->base2 << 24);
 
-	return base_addr;
-}
-
-static int load_tss_segment32(struct kvm_vcpu *vcpu,
-			      struct desc_struct *seg_desc,
-			      struct tss_segment_32 *tss)
-{
-	u32 base_addr;
-
-	base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-	return kvm_read_guest(vcpu->kvm, base_addr, tss,
-			      sizeof(struct tss_segment_32));
-}
-
-static int save_tss_segment32(struct kvm_vcpu *vcpu,
-			      struct desc_struct *seg_desc,
-			      struct tss_segment_32 *tss)
-{
-	u32 base_addr;
-
-	base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-	return kvm_write_guest(vcpu->kvm, base_addr, tss,
-			       sizeof(struct tss_segment_32));
-}
-
-static int load_tss_segment16(struct kvm_vcpu *vcpu,
-			      struct desc_struct *seg_desc,
-			      struct tss_segment_16 *tss)
-{
-	u32 base_addr;
-
-	base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-	return kvm_read_guest(vcpu->kvm, base_addr, tss,
-			      sizeof(struct tss_segment_16));
-}
-
-static int save_tss_segment16(struct kvm_vcpu *vcpu,
-			      struct desc_struct *seg_desc,
-			      struct tss_segment_16 *tss)
-{
-	u32 base_addr;
-
-	base_addr = get_tss_base_addr(vcpu, seg_desc);
-
-	return kvm_write_guest(vcpu->kvm, base_addr, tss,
-			       sizeof(struct tss_segment_16));
+	return vcpu->arch.mmu.gva_to_gpa(vcpu, base_addr);
 }
 
 static u16 get_segment_selector(struct kvm_vcpu *vcpu, int seg)
 {
 	struct kvm_segment kvm_seg;
 
-	get_segment(vcpu, &kvm_seg, seg);
+	kvm_get_segment(vcpu, &kvm_seg, seg);
 	return kvm_seg.selector;
 }
 
@@ -3313,8 +3294,8 @@ static int load_segment_descriptor_to_kvm_desct(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
-static int load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
-				   int type_bits, int seg)
+int kvm_load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
+				int type_bits, int seg)
 {
 	struct kvm_segment kvm_seg;
 
@@ -3327,7 +3308,7 @@ static int load_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 		if (!kvm_seg.s)
 			kvm_seg.unusable = 1;
 
-	set_segment(vcpu, &kvm_seg, seg);
+	kvm_set_segment(vcpu, &kvm_seg, seg);
 	return 0;
 }
 
@@ -3373,25 +3354,25 @@ static int load_state_from_tss32(struct kvm_vcpu *vcpu,
 	vcpu->arch.regs[VCPU_REGS_RSI] = tss->esi;
 	vcpu->arch.regs[VCPU_REGS_RDI] = tss->edi;
 
-	if (load_segment_descriptor(vcpu, tss->ldt_selector, 0, VCPU_SREG_LDTR))
+	if (kvm_load_segment_descriptor(vcpu, tss->ldt_selector, 0, VCPU_SREG_LDTR))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
+	if (kvm_load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
+	if (kvm_load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
+	if (kvm_load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
+	if (kvm_load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->fs, 1, VCPU_SREG_FS))
+	if (kvm_load_segment_descriptor(vcpu, tss->fs, 1, VCPU_SREG_FS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->gs, 1, VCPU_SREG_GS))
+	if (kvm_load_segment_descriptor(vcpu, tss->gs, 1, VCPU_SREG_GS))
 		return 1;
 	return 0;
 }
@@ -3432,38 +3413,44 @@ static int load_state_from_tss16(struct kvm_vcpu *vcpu,
 	vcpu->arch.regs[VCPU_REGS_RSI] = tss->si;
 	vcpu->arch.regs[VCPU_REGS_RDI] = tss->di;
 
-	if (load_segment_descriptor(vcpu, tss->ldt, 0, VCPU_SREG_LDTR))
+	if (kvm_load_segment_descriptor(vcpu, tss->ldt, 0, VCPU_SREG_LDTR))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
+	if (kvm_load_segment_descriptor(vcpu, tss->es, 1, VCPU_SREG_ES))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
+	if (kvm_load_segment_descriptor(vcpu, tss->cs, 9, VCPU_SREG_CS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
+	if (kvm_load_segment_descriptor(vcpu, tss->ss, 1, VCPU_SREG_SS))
 		return 1;
 
-	if (load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
+	if (kvm_load_segment_descriptor(vcpu, tss->ds, 1, VCPU_SREG_DS))
 		return 1;
 	return 0;
 }
 
-int kvm_task_switch_16(struct kvm_vcpu *vcpu, u16 tss_selector,
-		       struct desc_struct *cseg_desc,
+static int kvm_task_switch_16(struct kvm_vcpu *vcpu, u16 tss_selector,
+		       u32 old_tss_base,
 		       struct desc_struct *nseg_desc)
 {
 	struct tss_segment_16 tss_segment_16;
 	int ret = 0;
 
-	if (load_tss_segment16(vcpu, cseg_desc, &tss_segment_16))
+	if (kvm_read_guest(vcpu->kvm, old_tss_base, &tss_segment_16,
+			   sizeof tss_segment_16))
 		goto out;
 
 	save_state_to_tss16(vcpu, &tss_segment_16);
-	save_tss_segment16(vcpu, cseg_desc, &tss_segment_16);
 
-	if (load_tss_segment16(vcpu, nseg_desc, &tss_segment_16))
+	if (kvm_write_guest(vcpu->kvm, old_tss_base, &tss_segment_16,
+			    sizeof tss_segment_16))
+		goto out;
+
+	if (kvm_read_guest(vcpu->kvm, get_tss_base_addr(vcpu, nseg_desc),
+			   &tss_segment_16, sizeof tss_segment_16))
 		goto out;
+
 	if (load_state_from_tss16(vcpu, &tss_segment_16))
 		goto out;
 
@@ -3472,21 +3459,27 @@ out:
 	return ret;
 }
 
-int kvm_task_switch_32(struct kvm_vcpu *vcpu, u16 tss_selector,
-		       struct desc_struct *cseg_desc,
+static int kvm_task_switch_32(struct kvm_vcpu *vcpu, u16 tss_selector,
+		       u32 old_tss_base,
 		       struct desc_struct *nseg_desc)
 {
 	struct tss_segment_32 tss_segment_32;
 	int ret = 0;
 
-	if (load_tss_segment32(vcpu, cseg_desc, &tss_segment_32))
+	if (kvm_read_guest(vcpu->kvm, old_tss_base, &tss_segment_32,
+			   sizeof tss_segment_32))
 		goto out;
 
 	save_state_to_tss32(vcpu, &tss_segment_32);
-	save_tss_segment32(vcpu, cseg_desc, &tss_segment_32);
 
-	if (load_tss_segment32(vcpu, nseg_desc, &tss_segment_32))
+	if (kvm_write_guest(vcpu->kvm, old_tss_base, &tss_segment_32,
+			    sizeof tss_segment_32))
+		goto out;
+
+	if (kvm_read_guest(vcpu->kvm, get_tss_base_addr(vcpu, nseg_desc),
+			   &tss_segment_32, sizeof tss_segment_32))
 		goto out;
+
 	if (load_state_from_tss32(vcpu, &tss_segment_32))
 		goto out;
 
@@ -3501,16 +3494,20 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 	struct desc_struct cseg_desc;
 	struct desc_struct nseg_desc;
 	int ret = 0;
+	u32 old_tss_base = get_segment_base(vcpu, VCPU_SREG_TR);
+	u16 old_tss_sel = get_segment_selector(vcpu, VCPU_SREG_TR);
 
-	get_segment(vcpu, &tr_seg, VCPU_SREG_TR);
+	old_tss_base = vcpu->arch.mmu.gva_to_gpa(vcpu, old_tss_base);
 
+	/* FIXME: Handle errors. Failure to read either TSS or their
+	 * descriptors should generate a pagefault.
+	 */
 	if (load_guest_segment_descriptor(vcpu, tss_selector, &nseg_desc))
 		goto out;
 
-	if (load_guest_segment_descriptor(vcpu, tr_seg.selector, &cseg_desc))
+	if (load_guest_segment_descriptor(vcpu, old_tss_sel, &cseg_desc))
 		goto out;
 
-
 	if (reason != TASK_SWITCH_IRET) {
 		int cpl;
 
@@ -3528,8 +3525,7 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 
 	if (reason == TASK_SWITCH_IRET || reason == TASK_SWITCH_JMP) {
 		cseg_desc.type &= ~(1 << 1); //clear the B flag
-		save_guest_segment_descriptor(vcpu, tr_seg.selector,
-					      &cseg_desc);
+		save_guest_segment_descriptor(vcpu, old_tss_sel, &cseg_desc);
 	}
 
 	if (reason == TASK_SWITCH_IRET) {
@@ -3541,10 +3537,10 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 	kvm_x86_ops->cache_regs(vcpu);
 
 	if (nseg_desc.type & 8)
-		ret = kvm_task_switch_32(vcpu, tss_selector, &cseg_desc,
+		ret = kvm_task_switch_32(vcpu, tss_selector, old_tss_base,
 					 &nseg_desc);
 	else
-		ret = kvm_task_switch_16(vcpu, tss_selector, &cseg_desc,
+		ret = kvm_task_switch_16(vcpu, tss_selector, old_tss_base,
 					 &nseg_desc);
 
 	if (reason == TASK_SWITCH_CALL || reason == TASK_SWITCH_GATE) {
@@ -3561,7 +3557,7 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason)
 	kvm_x86_ops->set_cr0(vcpu, vcpu->arch.cr0 | X86_CR0_TS);
 	seg_desct_to_kvm_desct(&nseg_desc, tss_selector, &tr_seg);
 	tr_seg.type = 11;
-	set_segment(vcpu, &tr_seg, VCPU_SREG_TR);
+	kvm_set_segment(vcpu, &tr_seg, VCPU_SREG_TR);
 out:
 	kvm_x86_ops->decache_regs(vcpu);
 	return ret;
@@ -3628,15 +3624,15 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu,
 		}
 	}
 
-	set_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
-	set_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
-	set_segment(vcpu, &sregs->es, VCPU_SREG_ES);
-	set_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
-	set_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
-	set_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
+	kvm_set_segment(vcpu, &sregs->cs, VCPU_SREG_CS);
+	kvm_set_segment(vcpu, &sregs->ds, VCPU_SREG_DS);
+	kvm_set_segment(vcpu, &sregs->es, VCPU_SREG_ES);
+	kvm_set_segment(vcpu, &sregs->fs, VCPU_SREG_FS);
+	kvm_set_segment(vcpu, &sregs->gs, VCPU_SREG_GS);
+	kvm_set_segment(vcpu, &sregs->ss, VCPU_SREG_SS);
 
-	set_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
-	set_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
+	kvm_set_segment(vcpu, &sregs->tr, VCPU_SREG_TR);
+	kvm_set_segment(vcpu, &sregs->ldt, VCPU_SREG_LDTR);
 
 	vcpu_put(vcpu);
 
@@ -3751,14 +3747,14 @@ void fx_init(struct kvm_vcpu *vcpu)
 	 * allocate ram with GFP_KERNEL.
 	 */
 	if (!used_math())
-		fx_save(&vcpu->arch.host_fx_image);
+		kvm_fx_save(&vcpu->arch.host_fx_image);
 
 	/* Initialize guest FPU by resetting ours and saving into guest's */
 	preempt_disable();
-	fx_save(&vcpu->arch.host_fx_image);
-	fx_finit();
-	fx_save(&vcpu->arch.guest_fx_image);
-	fx_restore(&vcpu->arch.host_fx_image);
+	kvm_fx_save(&vcpu->arch.host_fx_image);
+	kvm_fx_finit();
+	kvm_fx_save(&vcpu->arch.guest_fx_image);
+	kvm_fx_restore(&vcpu->arch.host_fx_image);
 	preempt_enable();
 
 	vcpu->arch.cr0 |= X86_CR0_ET;
@@ -3775,8 +3771,8 @@ void kvm_load_guest_fpu(struct kvm_vcpu *vcpu)
 		return;
 
 	vcpu->guest_fpu_loaded = 1;
-	fx_save(&vcpu->arch.host_fx_image);
-	fx_restore(&vcpu->arch.guest_fx_image);
+	kvm_fx_save(&vcpu->arch.host_fx_image);
+	kvm_fx_restore(&vcpu->arch.guest_fx_image);
 }
 EXPORT_SYMBOL_GPL(kvm_load_guest_fpu);
 
@@ -3786,8 +3782,8 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu)
 		return;
 
 	vcpu->guest_fpu_loaded = 0;
-	fx_save(&vcpu->arch.guest_fx_image);
-	fx_restore(&vcpu->arch.host_fx_image);
+	kvm_fx_save(&vcpu->arch.guest_fx_image);
+	kvm_fx_restore(&vcpu->arch.host_fx_image);
 	++vcpu->stat.fpu_reload;
 }
 EXPORT_SYMBOL_GPL(kvm_put_guest_fpu);
@@ -3979,16 +3975,23 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	 */
 	if (!user_alloc) {
 		if (npages && !old.rmap) {
+			unsigned long userspace_addr;
+
 			down_write(&current->mm->mmap_sem);
-			memslot->userspace_addr = do_mmap(NULL, 0,
-						     npages * PAGE_SIZE,
-						     PROT_READ | PROT_WRITE,
-						     MAP_SHARED | MAP_ANONYMOUS,
-						     0);
+			userspace_addr = do_mmap(NULL, 0,
+						 npages * PAGE_SIZE,
+						 PROT_READ | PROT_WRITE,
+						 MAP_SHARED | MAP_ANONYMOUS,
+						 0);
 			up_write(&current->mm->mmap_sem);
 
-			if (IS_ERR((void *)memslot->userspace_addr))
-				return PTR_ERR((void *)memslot->userspace_addr);
+			if (IS_ERR((void *)userspace_addr))
+				return PTR_ERR((void *)userspace_addr);
+
+			/* set userspace_addr atomically for kvm_hva_to_rmapp */
+			spin_lock(&kvm->mmu_lock);
+			memslot->userspace_addr = userspace_addr;
+			spin_unlock(&kvm->mmu_lock);
 		} else {
 			if (!old.user_alloc && old.rmap) {
 				int ret;
@@ -4016,6 +4019,11 @@ int kvm_arch_set_memory_region(struct kvm *kvm,
 	return 0;
 }
 
+void kvm_arch_flush_shadow(struct kvm *kvm)
+{
+	kvm_mmu_zap_all(kvm);
+}
+
 int kvm_arch_vcpu_runnable(struct kvm_vcpu *vcpu)
 {
 	return vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE
@@ -4044,6 +4052,6 @@ void kvm_vcpu_kick(struct kvm_vcpu *vcpu)
 	 * So need not to call smp_call_function_single() in that case.
 	 */
 	if (vcpu->guest_mode && vcpu->cpu != cpu)
-		smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0, 0);
+		smp_call_function_single(ipi_pcpu, vcpu_kick_intr, vcpu, 0);
 	put_cpu();
 }
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index 932f216d890c..f2f90468f8b1 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -121,7 +121,7 @@ static u16 opcode_table[256] = {
 	0, 0, 0, DstReg | SrcMem32 | ModRM | Mov /* movsxd (x86/64) */ ,
 	0, 0, 0, 0,
 	/* 0x68 - 0x6F */
-	0, 0, ImplicitOps | Mov | Stack, 0,
+	SrcImm | Mov | Stack, 0, SrcImmByte | Mov | Stack, 0,
 	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* insb, insw/insd */
 	SrcNone  | ByteOp  | ImplicitOps, SrcNone  | ImplicitOps, /* outsb, outsw/outsd */
 	/* 0x70 - 0x77 */
@@ -138,9 +138,11 @@ static u16 opcode_table[256] = {
 	/* 0x88 - 0x8F */
 	ByteOp | DstMem | SrcReg | ModRM | Mov, DstMem | SrcReg | ModRM | Mov,
 	ByteOp | DstReg | SrcMem | ModRM | Mov, DstReg | SrcMem | ModRM | Mov,
-	0, ModRM | DstReg, 0, Group | Group1A,
-	/* 0x90 - 0x9F */
-	0, 0, 0, 0, 0, 0, 0, 0,
+	DstMem | SrcReg | ModRM | Mov, ModRM | DstReg,
+	DstReg | SrcMem | ModRM | Mov, Group | Group1A,
+	/* 0x90 - 0x97 */
+	DstReg, DstReg, DstReg, DstReg,	DstReg, DstReg, DstReg, DstReg,
+	/* 0x98 - 0x9F */
 	0, 0, 0, 0, ImplicitOps | Stack, ImplicitOps | Stack, 0, 0,
 	/* 0xA0 - 0xA7 */
 	ByteOp | DstReg | SrcMem | Mov | MemAbs, DstReg | SrcMem | Mov | MemAbs,
@@ -152,7 +154,8 @@ static u16 opcode_table[256] = {
 	ByteOp | ImplicitOps | Mov | String, ImplicitOps | Mov | String,
 	ByteOp | ImplicitOps | String, ImplicitOps | String,
 	/* 0xB0 - 0xBF */
-	0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	DstReg | SrcImm | Mov, 0, 0, 0, 0, 0, 0, 0,
 	/* 0xC0 - 0xC7 */
 	ByteOp | DstMem | SrcImm | ModRM, DstMem | SrcImmByte | ModRM,
 	0, ImplicitOps | Stack, 0, 0,
@@ -168,7 +171,8 @@ static u16 opcode_table[256] = {
 	/* 0xE0 - 0xE7 */
 	0, 0, 0, 0, 0, 0, 0, 0,
 	/* 0xE8 - 0xEF */
-	ImplicitOps | Stack, SrcImm|ImplicitOps, 0, SrcImmByte|ImplicitOps,
+	ImplicitOps | Stack, SrcImm | ImplicitOps,
+	ImplicitOps, SrcImmByte | ImplicitOps,
 	0, 0, 0, 0,
 	/* 0xF0 - 0xF7 */
 	0, 0, 0, 0,
@@ -215,7 +219,7 @@ static u16 twobyte_table[256] = {
 	/* 0xA0 - 0xA7 */
 	0, 0, 0, DstMem | SrcReg | ModRM | BitOp, 0, 0, 0, 0,
 	/* 0xA8 - 0xAF */
-	0, 0, 0, DstMem | SrcReg | ModRM | BitOp, 0, 0, 0, 0,
+	0, 0, 0, DstMem | SrcReg | ModRM | BitOp, 0, 0, ModRM, 0,
 	/* 0xB0 - 0xB7 */
 	ByteOp | DstMem | SrcReg | ModRM, DstMem | SrcReg | ModRM, 0,
 	    DstMem | SrcReg | ModRM | BitOp,
@@ -518,6 +522,39 @@ static inline void jmp_rel(struct decode_cache *c, int rel)
 	register_address_increment(c, &c->eip, rel);
 }
 
+static void set_seg_override(struct decode_cache *c, int seg)
+{
+	c->has_seg_override = true;
+	c->seg_override = seg;
+}
+
+static unsigned long seg_base(struct x86_emulate_ctxt *ctxt, int seg)
+{
+	if (ctxt->mode == X86EMUL_MODE_PROT64 && seg < VCPU_SREG_FS)
+		return 0;
+
+	return kvm_x86_ops->get_segment_base(ctxt->vcpu, seg);
+}
+
+static unsigned long seg_override_base(struct x86_emulate_ctxt *ctxt,
+				       struct decode_cache *c)
+{
+	if (!c->has_seg_override)
+		return 0;
+
+	return seg_base(ctxt, c->seg_override);
+}
+
+static unsigned long es_base(struct x86_emulate_ctxt *ctxt)
+{
+	return seg_base(ctxt, VCPU_SREG_ES);
+}
+
+static unsigned long ss_base(struct x86_emulate_ctxt *ctxt)
+{
+	return seg_base(ctxt, VCPU_SREG_SS);
+}
+
 static int do_fetch_insn_byte(struct x86_emulate_ctxt *ctxt,
 			      struct x86_emulate_ops *ops,
 			      unsigned long linear, u8 *dest)
@@ -660,7 +697,7 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
 {
 	struct decode_cache *c = &ctxt->decode;
 	u8 sib;
-	int index_reg = 0, base_reg = 0, scale, rip_relative = 0;
+	int index_reg = 0, base_reg = 0, scale;
 	int rc = 0;
 
 	if (c->rex_prefix) {
@@ -731,47 +768,28 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
 		}
 		if (c->modrm_rm == 2 || c->modrm_rm == 3 ||
 		    (c->modrm_rm == 6 && c->modrm_mod != 0))
-			if (!c->override_base)
-				c->override_base = &ctxt->ss_base;
+			if (!c->has_seg_override)
+				set_seg_override(c, VCPU_SREG_SS);
 		c->modrm_ea = (u16)c->modrm_ea;
 	} else {
 		/* 32/64-bit ModR/M decode. */
-		switch (c->modrm_rm) {
-		case 4:
-		case 12:
+		if ((c->modrm_rm & 7) == 4) {
 			sib = insn_fetch(u8, 1, c->eip);
 			index_reg |= (sib >> 3) & 7;
 			base_reg |= sib & 7;
 			scale = sib >> 6;
 
-			switch (base_reg) {
-			case 5:
-				if (c->modrm_mod != 0)
-					c->modrm_ea += c->regs[base_reg];
-				else
-					c->modrm_ea +=
-						insn_fetch(s32, 4, c->eip);
-				break;
-			default:
+			if ((base_reg & 7) == 5 && c->modrm_mod == 0)
+				c->modrm_ea += insn_fetch(s32, 4, c->eip);
+			else
 				c->modrm_ea += c->regs[base_reg];
-			}
-			switch (index_reg) {
-			case 4:
-				break;
-			default:
+			if (index_reg != 4)
 				c->modrm_ea += c->regs[index_reg] << scale;
-			}
-			break;
-		case 5:
-			if (c->modrm_mod != 0)
-				c->modrm_ea += c->regs[c->modrm_rm];
-			else if (ctxt->mode == X86EMUL_MODE_PROT64)
-				rip_relative = 1;
-			break;
-		default:
+		} else if ((c->modrm_rm & 7) == 5 && c->modrm_mod == 0) {
+			if (ctxt->mode == X86EMUL_MODE_PROT64)
+				c->rip_relative = 1;
+		} else
 			c->modrm_ea += c->regs[c->modrm_rm];
-			break;
-		}
 		switch (c->modrm_mod) {
 		case 0:
 			if (c->modrm_rm == 5)
@@ -785,22 +803,6 @@ static int decode_modrm(struct x86_emulate_ctxt *ctxt,
 			break;
 		}
 	}
-	if (rip_relative) {
-		c->modrm_ea += c->eip;
-		switch (c->d & SrcMask) {
-		case SrcImmByte:
-			c->modrm_ea += 1;
-			break;
-		case SrcImm:
-			if (c->d & ByteOp)
-				c->modrm_ea += 1;
-			else
-				if (c->op_bytes == 8)
-					c->modrm_ea += 4;
-				else
-					c->modrm_ea += c->op_bytes;
-		}
-	}
 done:
 	return rc;
 }
@@ -838,6 +840,7 @@ x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 
 	memset(c, 0, sizeof(struct decode_cache));
 	c->eip = ctxt->vcpu->arch.rip;
+	ctxt->cs_base = seg_base(ctxt, VCPU_SREG_CS);
 	memcpy(c->regs, ctxt->vcpu->arch.regs, sizeof c->regs);
 
 	switch (mode) {
@@ -876,23 +879,15 @@ x86_decode_insn(struct x86_emulate_ctxt *ctxt, struct x86_emulate_ops *ops)
 				/* switch between 2/4 bytes */
 				c->ad_bytes = def_ad_bytes ^ 6;
 			break;
+		case 0x26:	/* ES override */
 		case 0x2e:	/* CS override */
-			c->override_base = &ctxt->cs_base;
-			break;
+		case 0x36:	/* SS override */
 		case 0x3e:	/* DS override */
-			c->override_base = &ctxt->ds_base;
-			break;
-		case 0x26:	/* ES override */
-			c->override_base = &ctxt->es_base;
+			set_seg_override(c, (c->b >> 3) & 3);
 			break;
 		case 0x64:	/* FS override */
-			c->override_base = &ctxt->fs_base;
-			break;
 		case 0x65:	/* GS override */
-			c->override_base = &ctxt->gs_base;
-			break;
-		case 0x36:	/* SS override */
-			c->override_base = &ctxt->ss_base;
+			set_seg_override(c, c->b & 7);
 			break;
 		case 0x40 ... 0x4f: /* REX */
 			if (mode != X86EMUL_MODE_PROT64)
@@ -964,15 +959,11 @@ done_prefixes:
 	if (rc)
 		goto done;
 
-	if (!c->override_base)
-		c->override_base = &ctxt->ds_base;
-	if (mode == X86EMUL_MODE_PROT64 &&
-	    c->override_base != &ctxt->fs_base &&
-	    c->override_base != &ctxt->gs_base)
-		c->override_base = NULL;
+	if (!c->has_seg_override)
+		set_seg_override(c, VCPU_SREG_DS);
 
-	if (c->override_base)
-		c->modrm_ea += *c->override_base;
+	if (!(!c->twobyte && c->b == 0x8d))
+		c->modrm_ea += seg_override_base(ctxt, c);
 
 	if (c->ad_bytes != 8)
 		c->modrm_ea = (u32)c->modrm_ea;
@@ -1049,6 +1040,7 @@ done_prefixes:
 		break;
 	case DstMem:
 		if ((c->d & ModRM) && c->modrm_mod == 3) {
+			c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 			c->dst.type = OP_REG;
 			c->dst.val = c->dst.orig_val = c->modrm_val;
 			c->dst.ptr = c->modrm_ptr;
@@ -1058,6 +1050,9 @@ done_prefixes:
 		break;
 	}
 
+	if (c->rip_relative)
+		c->modrm_ea += c->eip;
+
 done:
 	return (rc == X86EMUL_UNHANDLEABLE) ? -1 : 0;
 }
@@ -1070,7 +1065,7 @@ static inline void emulate_push(struct x86_emulate_ctxt *ctxt)
 	c->dst.bytes = c->op_bytes;
 	c->dst.val = c->src.val;
 	register_address_increment(c, &c->regs[VCPU_REGS_RSP], -c->op_bytes);
-	c->dst.ptr = (void *) register_address(c, ctxt->ss_base,
+	c->dst.ptr = (void *) register_address(c, ss_base(ctxt),
 					       c->regs[VCPU_REGS_RSP]);
 }
 
@@ -1080,7 +1075,7 @@ static inline int emulate_grp1a(struct x86_emulate_ctxt *ctxt,
 	struct decode_cache *c = &ctxt->decode;
 	int rc;
 
-	rc = ops->read_std(register_address(c, ctxt->ss_base,
+	rc = ops->read_std(register_address(c, ss_base(ctxt),
 					    c->regs[VCPU_REGS_RSP]),
 			   &c->dst.val, c->dst.bytes, ctxt->vcpu);
 	if (rc != 0)
@@ -1402,11 +1397,11 @@ special_insn:
 		register_address_increment(c, &c->regs[VCPU_REGS_RSP],
 					   -c->op_bytes);
 		c->dst.ptr = (void *) register_address(
-			c, ctxt->ss_base, c->regs[VCPU_REGS_RSP]);
+			c, ss_base(ctxt), c->regs[VCPU_REGS_RSP]);
 		break;
 	case 0x58 ... 0x5f: /* pop reg */
 	pop_instruction:
-		if ((rc = ops->read_std(register_address(c, ctxt->ss_base,
+		if ((rc = ops->read_std(register_address(c, ss_base(ctxt),
 			c->regs[VCPU_REGS_RSP]), c->dst.ptr,
 			c->op_bytes, ctxt->vcpu)) != 0)
 			goto done;
@@ -1420,9 +1415,8 @@ special_insn:
 			goto cannot_emulate;
 		c->dst.val = (s32) c->src.val;
 		break;
+	case 0x68: /* push imm */
 	case 0x6a: /* push imm8 */
-		c->src.val = 0L;
-		c->src.val = insn_fetch(s8, 1, c->eip);
 		emulate_push(ctxt);
 		break;
 	case 0x6c:		/* insb */
@@ -1433,7 +1427,7 @@ special_insn:
 				c->rep_prefix ?
 				address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
 				(ctxt->eflags & EFLG_DF),
-				register_address(c, ctxt->es_base,
+				register_address(c, es_base(ctxt),
 						 c->regs[VCPU_REGS_RDI]),
 				c->rep_prefix,
 				c->regs[VCPU_REGS_RDX]) == 0) {
@@ -1449,9 +1443,8 @@ special_insn:
 				c->rep_prefix ?
 				address_mask(c, c->regs[VCPU_REGS_RCX]) : 1,
 				(ctxt->eflags & EFLG_DF),
-				register_address(c, c->override_base ?
-							*c->override_base :
-							ctxt->ds_base,
+					 register_address(c,
+					  seg_override_base(ctxt, c),
 						 c->regs[VCPU_REGS_RSI]),
 				c->rep_prefix,
 				c->regs[VCPU_REGS_RDX]) == 0) {
@@ -1490,6 +1483,7 @@ special_insn:
 		emulate_2op_SrcV("test", c->src, c->dst, ctxt->eflags);
 		break;
 	case 0x86 ... 0x87:	/* xchg */
+	xchg:
 		/* Write back the register source. */
 		switch (c->dst.bytes) {
 		case 1:
@@ -1514,14 +1508,60 @@ special_insn:
 		break;
 	case 0x88 ... 0x8b:	/* mov */
 		goto mov;
+	case 0x8c: { /* mov r/m, sreg */
+		struct kvm_segment segreg;
+
+		if (c->modrm_reg <= 5)
+			kvm_get_segment(ctxt->vcpu, &segreg, c->modrm_reg);
+		else {
+			printk(KERN_INFO "0x8c: Invalid segreg in modrm byte 0x%02x\n",
+			       c->modrm);
+			goto cannot_emulate;
+		}
+		c->dst.val = segreg.selector;
+		break;
+	}
 	case 0x8d: /* lea r16/r32, m */
 		c->dst.val = c->modrm_ea;
 		break;
+	case 0x8e: { /* mov seg, r/m16 */
+		uint16_t sel;
+		int type_bits;
+		int err;
+
+		sel = c->src.val;
+		if (c->modrm_reg <= 5) {
+			type_bits = (c->modrm_reg == 1) ? 9 : 1;
+			err = kvm_load_segment_descriptor(ctxt->vcpu, sel,
+							  type_bits, c->modrm_reg);
+		} else {
+			printk(KERN_INFO "Invalid segreg in modrm byte 0x%02x\n",
+					c->modrm);
+			goto cannot_emulate;
+		}
+
+		if (err < 0)
+			goto cannot_emulate;
+
+		c->dst.type = OP_NONE;  /* Disable writeback. */
+		break;
+	}
 	case 0x8f:		/* pop (sole member of Grp1a) */
 		rc = emulate_grp1a(ctxt, ops);
 		if (rc != 0)
 			goto done;
 		break;
+	case 0x90: /* nop / xchg r8,rax */
+		if (!(c->rex_prefix & 1)) { /* nop */
+			c->dst.type = OP_NONE;
+			break;
+		}
+	case 0x91 ... 0x97: /* xchg reg,rax */
+		c->src.type = c->dst.type = OP_REG;
+		c->src.bytes = c->dst.bytes = c->op_bytes;
+		c->src.ptr = (unsigned long *) &c->regs[VCPU_REGS_RAX];
+		c->src.val = *(c->src.ptr);
+		goto xchg;
 	case 0x9c: /* pushf */
 		c->src.val =  (unsigned long) ctxt->eflags;
 		emulate_push(ctxt);
@@ -1540,11 +1580,10 @@ special_insn:
 		c->dst.type = OP_MEM;
 		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->dst.ptr = (unsigned long *)register_address(c,
-						   ctxt->es_base,
+						   es_base(ctxt),
 						   c->regs[VCPU_REGS_RDI]);
 		if ((rc = ops->read_emulated(register_address(c,
-		      c->override_base ? *c->override_base :
-					ctxt->ds_base,
+					   seg_override_base(ctxt, c),
 					c->regs[VCPU_REGS_RSI]),
 					&c->dst.val,
 					c->dst.bytes, ctxt->vcpu)) != 0)
@@ -1560,8 +1599,7 @@ special_insn:
 		c->src.type = OP_NONE; /* Disable writeback. */
 		c->src.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->src.ptr = (unsigned long *)register_address(c,
-				c->override_base ? *c->override_base :
-						   ctxt->ds_base,
+				       seg_override_base(ctxt, c),
 						   c->regs[VCPU_REGS_RSI]);
 		if ((rc = ops->read_emulated((unsigned long)c->src.ptr,
 						&c->src.val,
@@ -1572,7 +1610,7 @@ special_insn:
 		c->dst.type = OP_NONE; /* Disable writeback. */
 		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->dst.ptr = (unsigned long *)register_address(c,
-						   ctxt->es_base,
+						   es_base(ctxt),
 						   c->regs[VCPU_REGS_RDI]);
 		if ((rc = ops->read_emulated((unsigned long)c->dst.ptr,
 						&c->dst.val,
@@ -1596,7 +1634,7 @@ special_insn:
 		c->dst.type = OP_MEM;
 		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->dst.ptr = (unsigned long *)register_address(c,
-						   ctxt->es_base,
+						   es_base(ctxt),
 						   c->regs[VCPU_REGS_RDI]);
 		c->dst.val = c->regs[VCPU_REGS_RAX];
 		register_address_increment(c, &c->regs[VCPU_REGS_RDI],
@@ -1608,8 +1646,7 @@ special_insn:
 		c->dst.bytes = (c->d & ByteOp) ? 1 : c->op_bytes;
 		c->dst.ptr = (unsigned long *)&c->regs[VCPU_REGS_RAX];
 		if ((rc = ops->read_emulated(register_address(c,
-				c->override_base ? *c->override_base :
-						   ctxt->ds_base,
+						 seg_override_base(ctxt, c),
 						 c->regs[VCPU_REGS_RSI]),
 						 &c->dst.val,
 						 c->dst.bytes,
@@ -1622,6 +1659,8 @@ special_insn:
 	case 0xae ... 0xaf:	/* scas */
 		DPRINTF("Urk! I don't handle SCAS.\n");
 		goto cannot_emulate;
+	case 0xb8: /* mov r, imm */
+		goto mov;
 	case 0xc0 ... 0xc1:
 		emulate_grp2(ctxt);
 		break;
@@ -1660,13 +1699,39 @@ special_insn:
 		break;
 	}
 	case 0xe9: /* jmp rel */
-	case 0xeb: /* jmp rel short */
+		goto jmp;
+	case 0xea: /* jmp far */ {
+		uint32_t eip;
+		uint16_t sel;
+
+		switch (c->op_bytes) {
+		case 2:
+			eip = insn_fetch(u16, 2, c->eip);
+			break;
+		case 4:
+			eip = insn_fetch(u32, 4, c->eip);
+			break;
+		default:
+			DPRINTF("jmp far: Invalid op_bytes\n");
+			goto cannot_emulate;
+		}
+		sel = insn_fetch(u16, 2, c->eip);
+		if (kvm_load_segment_descriptor(ctxt->vcpu, sel, 9, VCPU_SREG_CS) < 0) {
+			DPRINTF("jmp far: Failed to load CS descriptor\n");
+			goto cannot_emulate;
+		}
+
+		c->eip = eip;
+		break;
+	}
+	case 0xeb:
+	      jmp:		/* jmp rel short */
 		jmp_rel(c, c->src.val);
 		c->dst.type = OP_NONE; /* Disable writeback. */
 		break;
 	case 0xf4:              /* hlt */
 		ctxt->vcpu->arch.halt_request = 1;
-		goto done;
+		break;
 	case 0xf5:	/* cmc */
 		/* complement carry flag from eflags reg */
 		ctxt->eflags ^= EFLG_CF;
@@ -1882,6 +1947,8 @@ twobyte_insn:
 		c->src.val &= (c->dst.bytes << 3) - 1;
 		emulate_2op_SrcV_nobyte("bts", c->src, c->dst, ctxt->eflags);
 		break;
+	case 0xae:              /* clflush */
+		break;
 	case 0xb0 ... 0xb1:	/* cmpxchg */
 		/*
 		 * Save real source value, then compare EAX against
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 50dad44fb542..d9249a882aa5 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -991,7 +991,6 @@ __init void lguest_init(void)
 #ifdef CONFIG_X86_LOCAL_APIC
 	/* apic read/write intercepts */
 	pv_apic_ops.apic_write = lguest_apic_write;
-	pv_apic_ops.apic_write_atomic = lguest_apic_write;
 	pv_apic_ops.apic_read = lguest_apic_read;
 #endif
 
@@ -1015,6 +1014,9 @@ __init void lguest_init(void)
 	init_pg_tables_start = __pa(pg0);
 	init_pg_tables_end = __pa(pg0);
 
+	/* As described in head_32.S, we map the first 128M of memory. */
+	max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
+
 	/* Load the %fs segment register (the per-cpu segment register) with
 	 * the normal data segment to get through booting. */
 	asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory");
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index dfdf428975c0..f118c110af32 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -52,7 +52,7 @@
 	jnz 100b
 102:
 	.section .fixup,"ax"
-103:	addl %r8d,%edx			/* ecx is zerorest also */
+103:	addl %ecx,%edx			/* ecx is zerorest also */
 	jmp copy_user_handle_tail
 	.previous
 
diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S
index 40e0e309d27e..cb0c112386fb 100644
--- a/arch/x86/lib/copy_user_nocache_64.S
+++ b/arch/x86/lib/copy_user_nocache_64.S
@@ -32,7 +32,7 @@
 	jnz 100b
 102:
 	.section .fixup,"ax"
-103:	addl %r8d,%edx			/* ecx is zerorest also */
+103:	addl %ecx,%edx			/* ecx is zerorest also */
 	jmp copy_user_handle_tail
 	.previous
 
@@ -108,7 +108,6 @@ ENTRY(__copy_user_nocache)
 	jmp 60f
 50:	movl %ecx,%edx
 60:	sfence
-	movl %r8d,%ecx
 	jmp copy_user_handle_tail
 	.previous
 
diff --git a/arch/x86/lib/msr-on-cpu.c b/arch/x86/lib/msr-on-cpu.c
index 57d043fa893e..d5a2b39f882b 100644
--- a/arch/x86/lib/msr-on-cpu.c
+++ b/arch/x86/lib/msr-on-cpu.c
@@ -30,10 +30,10 @@ static int _rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h, int safe)
 
 	rv.msr_no = msr_no;
 	if (safe) {
-		smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 0, 1);
+		smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1);
 		err = rv.err;
 	} else {
-		smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 0, 1);
+		smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
 	}
 	*l = rv.l;
 	*h = rv.h;
@@ -64,10 +64,10 @@ static int _wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h, int safe)
 	rv.l = l;
 	rv.h = h;
 	if (safe) {
-		smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 0, 1);
+		smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1);
 		err = rv.err;
 	} else {
-		smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 0, 1);
+		smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
 	}
 
 	return err;
diff --git a/arch/x86/mach-default/setup.c b/arch/x86/mach-default/setup.c
index 48278fa7d3de..3d317836be9e 100644
--- a/arch/x86/mach-default/setup.c
+++ b/arch/x86/mach-default/setup.c
@@ -10,14 +10,6 @@
 #include <asm/e820.h>
 #include <asm/setup.h>
 
-/*
- * Any quirks to be performed to initialize timers/irqs/etc?
- */
-int (*arch_time_init_quirk)(void);
-int (*arch_pre_intr_init_quirk)(void);
-int (*arch_intr_init_quirk)(void);
-int (*arch_trap_init_quirk)(void);
-
 #ifdef CONFIG_HOTPLUG_CPU
 #define DEFAULT_SEND_IPI	(1)
 #else
@@ -37,8 +29,8 @@ int no_broadcast=DEFAULT_SEND_IPI;
  **/
 void __init pre_intr_init_hook(void)
 {
-	if (arch_pre_intr_init_quirk) {
-		if (arch_pre_intr_init_quirk())
+	if (x86_quirks->arch_pre_intr_init) {
+		if (x86_quirks->arch_pre_intr_init())
 			return;
 	}
 	init_ISA_irqs();
@@ -64,8 +56,8 @@ static struct irqaction irq2 = {
  **/
 void __init intr_init_hook(void)
 {
-	if (arch_intr_init_quirk) {
-		if (arch_intr_init_quirk())
+	if (x86_quirks->arch_intr_init) {
+		if (x86_quirks->arch_intr_init())
 			return;
 	}
 #ifdef CONFIG_X86_LOCAL_APIC
@@ -97,8 +89,8 @@ void __init pre_setup_arch_hook(void)
  **/
 void __init trap_init_hook(void)
 {
-	if (arch_trap_init_quirk) {
-		if (arch_trap_init_quirk())
+	if (x86_quirks->arch_trap_init) {
+		if (x86_quirks->arch_trap_init())
 			return;
 	}
 }
@@ -111,6 +103,16 @@ static struct irqaction irq0  = {
 };
 
 /**
+ * pre_time_init_hook - do any specific initialisations before.
+ *
+ **/
+void __init pre_time_init_hook(void)
+{
+	if (x86_quirks->arch_pre_time_init)
+		x86_quirks->arch_pre_time_init();
+}
+
+/**
  * time_init_hook - do any specific initialisations for the system timer.
  *
  * Description:
@@ -119,13 +121,13 @@ static struct irqaction irq0  = {
  **/
 void __init time_init_hook(void)
 {
-	if (arch_time_init_quirk) {
+	if (x86_quirks->arch_time_init) {
 		/*
 		 * A nonzero return code does not mean failure, it means
 		 * that the architecture quirk does not want any
 		 * generic (timer) setup to be performed after this:
 		 */
-		if (arch_time_init_quirk())
+		if (x86_quirks->arch_time_init())
 			return;
 	}
 
diff --git a/arch/x86/mach-es7000/es7000plat.c b/arch/x86/mach-es7000/es7000plat.c
index 4354ce804889..50189af14b85 100644
--- a/arch/x86/mach-es7000/es7000plat.c
+++ b/arch/x86/mach-es7000/es7000plat.c
@@ -130,10 +130,10 @@ parse_unisys_oem (char *oemptr)
 			mip_addr = val;
 			mip = (struct mip_reg *)val;
 			mip_reg = __va(mip);
-			Dprintk("es7000_mipcfg: host_reg = 0x%lx \n",
-				(unsigned long)host_reg);
-			Dprintk("es7000_mipcfg: mip_reg = 0x%lx \n",
-				(unsigned long)mip_reg);
+			pr_debug("es7000_mipcfg: host_reg = 0x%lx \n",
+				 (unsigned long)host_reg);
+			pr_debug("es7000_mipcfg: mip_reg = 0x%lx \n",
+				 (unsigned long)mip_reg);
 			success++;
 			break;
 		case MIP_PSAI_REG:
diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c
index 8dedd01e909f..ee0fba092157 100644
--- a/arch/x86/mach-voyager/voyager_smp.c
+++ b/arch/x86/mach-voyager/voyager_smp.c
@@ -950,94 +950,24 @@ static void smp_stop_cpu_function(void *dummy)
 		halt();
 }
 
-static DEFINE_SPINLOCK(call_lock);
-
-struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	volatile unsigned long started;
-	volatile unsigned long finished;
-	int wait;
-};
-
-static struct call_data_struct *call_data;
-
 /* execute a thread on a new CPU.  The function to be called must be
  * previously set up.  This is used to schedule a function for
  * execution on all CPUs - set up the function then broadcast a
  * function_interrupt CPI to come here on each CPU */
 static void smp_call_function_interrupt(void)
 {
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
-	/* must take copy of wait because call_data may be replaced
-	 * unless the function is waiting for us to finish */
-	int wait = call_data->wait;
-	__u8 cpu = smp_processor_id();
-
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function
-	 */
-	mb();
-	if (!test_and_clear_bit(cpu, &call_data->started)) {
-		/* If the bit wasn't set, this could be a replay */
-		printk(KERN_WARNING "VOYAGER SMP: CPU %d received call funtion"
-		       " with no call pending\n", cpu);
-		return;
-	}
-	/*
-	 * At this point the info structure may be out of scope unless wait==1
-	 */
 	irq_enter();
-	(*func) (info);
+	generic_smp_call_function_interrupt();
 	__get_cpu_var(irq_stat).irq_call_count++;
 	irq_exit();
-	if (wait) {
-		mb();
-		clear_bit(cpu, &call_data->finished);
-	}
 }
 
-static int
-voyager_smp_call_function_mask(cpumask_t cpumask,
-			       void (*func) (void *info), void *info, int wait)
+static void smp_call_function_single_interrupt(void)
 {
-	struct call_data_struct data;
-	u32 mask = cpus_addr(cpumask)[0];
-
-	mask &= ~(1 << smp_processor_id());
-
-	if (!mask)
-		return 0;
-
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
-
-	data.func = func;
-	data.info = info;
-	data.started = mask;
-	data.wait = wait;
-	if (wait)
-		data.finished = mask;
-
-	spin_lock(&call_lock);
-	call_data = &data;
-	wmb();
-	/* Send a message to all other CPUs and wait for them to respond */
-	send_CPI(mask, VIC_CALL_FUNCTION_CPI);
-
-	/* Wait for response */
-	while (data.started)
-		barrier();
-
-	if (wait)
-		while (data.finished)
-			barrier();
-
-	spin_unlock(&call_lock);
-
-	return 0;
+	irq_enter();
+	generic_smp_call_function_single_interrupt();
+	__get_cpu_var(irq_stat).irq_call_count++;
+	irq_exit();
 }
 
 /* Sorry about the name.  In an APIC based system, the APICs
@@ -1094,6 +1024,12 @@ void smp_qic_call_function_interrupt(struct pt_regs *regs)
 	smp_call_function_interrupt();
 }
 
+void smp_qic_call_function_single_interrupt(struct pt_regs *regs)
+{
+	ack_QIC_CPI(QIC_CALL_FUNCTION_SINGLE_CPI);
+	smp_call_function_single_interrupt();
+}
+
 void smp_vic_cpi_interrupt(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
@@ -1114,6 +1050,8 @@ void smp_vic_cpi_interrupt(struct pt_regs *regs)
 		smp_enable_irq_interrupt();
 	if (test_and_clear_bit(VIC_CALL_FUNCTION_CPI, &vic_cpi_mailbox[cpu]))
 		smp_call_function_interrupt();
+	if (test_and_clear_bit(VIC_CALL_FUNCTION_SINGLE_CPI, &vic_cpi_mailbox[cpu]))
+		smp_call_function_single_interrupt();
 	set_irq_regs(old_regs);
 }
 
@@ -1129,7 +1067,7 @@ static void do_flush_tlb_all(void *info)
 /* flush the TLB of every active CPU in the system */
 void flush_tlb_all(void)
 {
-	on_each_cpu(do_flush_tlb_all, 0, 1, 1);
+	on_each_cpu(do_flush_tlb_all, 0, 1);
 }
 
 /* send a reschedule CPI to one CPU by physical CPU number*/
@@ -1161,7 +1099,7 @@ int safe_smp_processor_id(void)
 /* broadcast a halt to all other CPUs */
 static void voyager_smp_send_stop(void)
 {
-	smp_call_function(smp_stop_cpu_function, NULL, 1, 1);
+	smp_call_function(smp_stop_cpu_function, NULL, 1);
 }
 
 /* this function is triggered in time.c when a clock tick fires
@@ -1848,5 +1786,7 @@ struct smp_ops smp_ops = {
 
 	.smp_send_stop = voyager_smp_send_stop,
 	.smp_send_reschedule = voyager_smp_send_reschedule,
-	.smp_call_function_mask = voyager_smp_call_function_mask,
+
+	.send_call_func_ipi = native_send_call_func_ipi,
+	.send_call_func_single_ipi = native_send_call_func_single_ipi,
 };
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 9873716e9f76..2977ea37791f 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,6 +1,7 @@
 obj-y	:=  init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
 	    pat.o pgtable.o
 
+obj-$(CONFIG_HAVE_GET_USER_PAGES_FAST) += gup.o
 obj-$(CONFIG_X86_32)		+= pgtable_32.o
 
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
@@ -21,3 +22,4 @@ obj-$(CONFIG_K8_NUMA)		+= k8topology_64.o
 endif
 obj-$(CONFIG_ACPI_NUMA)		+= srat_$(BITS).o
 
+obj-$(CONFIG_MEMTEST)		+= memtest.o
diff --git a/arch/x86/mm/discontig_32.c b/arch/x86/mm/discontig_32.c
index 5dfef9fa061a..62fa440678d8 100644
--- a/arch/x86/mm/discontig_32.c
+++ b/arch/x86/mm/discontig_32.c
@@ -42,7 +42,6 @@
 
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
-static bootmem_data_t node0_bdata;
 
 /*
  * numa interface - we expect the numa architecture specific code to have
@@ -385,7 +384,7 @@ void __init initmem_init(unsigned long start_pfn,
 	for_each_online_node(nid)
 		memset(NODE_DATA(nid), 0, sizeof(struct pglist_data));
 
-	NODE_DATA(0)->bdata = &node0_bdata;
+	NODE_DATA(0)->bdata = &bootmem_node_data[0];
 	setup_bootmem_allocator();
 }
 
diff --git a/arch/x86/mm/dump_pagetables.c b/arch/x86/mm/dump_pagetables.c
index 0bb0caed8971..a20d1fa64b4e 100644
--- a/arch/x86/mm/dump_pagetables.c
+++ b/arch/x86/mm/dump_pagetables.c
@@ -148,8 +148,8 @@ static void note_page(struct seq_file *m, struct pg_state *st,
 	 * we have now. "break" is either changing perms, levels or
 	 * address space marker.
 	 */
-	prot = pgprot_val(new_prot) & ~(PTE_MASK);
-	cur = pgprot_val(st->current_prot) & ~(PTE_MASK);
+	prot = pgprot_val(new_prot) & ~(PTE_PFN_MASK);
+	cur = pgprot_val(st->current_prot) & ~(PTE_PFN_MASK);
 
 	if (!st->level) {
 		/* First entry */
@@ -221,7 +221,7 @@ static void walk_pmd_level(struct seq_file *m, struct pg_state *st, pud_t addr,
 	for (i = 0; i < PTRS_PER_PMD; i++) {
 		st->current_address = normalize_addr(P + i * PMD_LEVEL_MULT);
 		if (!pmd_none(*start)) {
-			pgprotval_t prot = pmd_val(*start) & ~PTE_MASK;
+			pgprotval_t prot = pmd_val(*start) & PTE_FLAGS_MASK;
 
 			if (pmd_large(*start) || !pmd_present(*start))
 				note_page(m, st, __pgprot(prot), 3);
@@ -253,7 +253,7 @@ static void walk_pud_level(struct seq_file *m, struct pg_state *st, pgd_t addr,
 	for (i = 0; i < PTRS_PER_PUD; i++) {
 		st->current_address = normalize_addr(P + i * PUD_LEVEL_MULT);
 		if (!pud_none(*start)) {
-			pgprotval_t prot = pud_val(*start) & ~PTE_MASK;
+			pgprotval_t prot = pud_val(*start) & PTE_FLAGS_MASK;
 
 			if (pud_large(*start) || !pud_present(*start))
 				note_page(m, st, __pgprot(prot), 2);
@@ -288,7 +288,7 @@ static void walk_pgd_level(struct seq_file *m)
 	for (i = 0; i < PTRS_PER_PGD; i++) {
 		st.current_address = normalize_addr(i * PGD_LEVEL_MULT);
 		if (!pgd_none(*start)) {
-			pgprotval_t prot = pgd_val(*start) & ~PTE_MASK;
+			pgprotval_t prot = pgd_val(*start) & PTE_FLAGS_MASK;
 
 			if (pgd_large(*start) || !pgd_present(*start))
 				note_page(m, &st, __pgprot(prot), 1);
diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c
new file mode 100644
index 000000000000..007bb06c7504
--- /dev/null
+++ b/arch/x86/mm/gup.c
@@ -0,0 +1,298 @@
+/*
+ * Lockless get_user_pages_fast for x86
+ *
+ * Copyright (C) 2008 Nick Piggin
+ * Copyright (C) 2008 Novell Inc.
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/vmstat.h>
+#include <linux/highmem.h>
+
+#include <asm/pgtable.h>
+
+static inline pte_t gup_get_pte(pte_t *ptep)
+{
+#ifndef CONFIG_X86_PAE
+	return *ptep;
+#else
+	/*
+	 * With get_user_pages_fast, we walk down the pagetables without taking
+	 * any locks.  For this we would like to load the pointers atoimcally,
+	 * but that is not possible (without expensive cmpxchg8b) on PAE.  What
+	 * we do have is the guarantee that a pte will only either go from not
+	 * present to present, or present to not present or both -- it will not
+	 * switch to a completely different present page without a TLB flush in
+	 * between; something that we are blocking by holding interrupts off.
+	 *
+	 * Setting ptes from not present to present goes:
+	 * ptep->pte_high = h;
+	 * smp_wmb();
+	 * ptep->pte_low = l;
+	 *
+	 * And present to not present goes:
+	 * ptep->pte_low = 0;
+	 * smp_wmb();
+	 * ptep->pte_high = 0;
+	 *
+	 * We must ensure here that the load of pte_low sees l iff pte_high
+	 * sees h. We load pte_high *after* loading pte_low, which ensures we
+	 * don't see an older value of pte_high.  *Then* we recheck pte_low,
+	 * which ensures that we haven't picked up a changed pte high. We might
+	 * have got rubbish values from pte_low and pte_high, but we are
+	 * guaranteed that pte_low will not have the present bit set *unless*
+	 * it is 'l'. And get_user_pages_fast only operates on present ptes, so
+	 * we're safe.
+	 *
+	 * gup_get_pte should not be used or copied outside gup.c without being
+	 * very careful -- it does not atomically load the pte or anything that
+	 * is likely to be useful for you.
+	 */
+	pte_t pte;
+
+retry:
+	pte.pte_low = ptep->pte_low;
+	smp_rmb();
+	pte.pte_high = ptep->pte_high;
+	smp_rmb();
+	if (unlikely(pte.pte_low != ptep->pte_low))
+		goto retry;
+
+	return pte;
+#endif
+}
+
+/*
+ * The performance critical leaf functions are made noinline otherwise gcc
+ * inlines everything into a single function which results in too much
+ * register pressure.
+ */
+static noinline int gup_pte_range(pmd_t pmd, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	pte_t *ptep;
+
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+
+	ptep = pte_offset_map(&pmd, addr);
+	do {
+		pte_t pte = gup_get_pte(ptep);
+		struct page *page;
+
+		if ((pte_val(pte) & (mask | _PAGE_SPECIAL)) != mask) {
+			pte_unmap(ptep);
+			return 0;
+		}
+		VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+		page = pte_page(pte);
+		get_page(page);
+		pages[*nr] = page;
+		(*nr)++;
+
+	} while (ptep++, addr += PAGE_SIZE, addr != end);
+	pte_unmap(ptep - 1);
+
+	return 1;
+}
+
+static inline void get_head_page_multiple(struct page *page, int nr)
+{
+	VM_BUG_ON(page != compound_head(page));
+	VM_BUG_ON(page_count(page) == 0);
+	atomic_add(nr, &page->_count);
+}
+
+static noinline int gup_huge_pmd(pmd_t pmd, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	pte_t pte = *(pte_t *)&pmd;
+	struct page *head, *page;
+	int refs;
+
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+	if ((pte_val(pte) & mask) != mask)
+		return 0;
+	/* hugepages are never "special" */
+	VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL);
+	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+	refs = 0;
+	head = pte_page(pte);
+	page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT);
+	do {
+		VM_BUG_ON(compound_head(page) != head);
+		pages[*nr] = page;
+		(*nr)++;
+		page++;
+		refs++;
+	} while (addr += PAGE_SIZE, addr != end);
+	get_head_page_multiple(head, refs);
+
+	return 1;
+}
+
+static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end,
+		int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pmd_t *pmdp;
+
+	pmdp = pmd_offset(&pud, addr);
+	do {
+		pmd_t pmd = *pmdp;
+
+		next = pmd_addr_end(addr, end);
+		if (pmd_none(pmd))
+			return 0;
+		if (unlikely(pmd_large(pmd))) {
+			if (!gup_huge_pmd(pmd, addr, next, write, pages, nr))
+				return 0;
+		} else {
+			if (!gup_pte_range(pmd, addr, next, write, pages, nr))
+				return 0;
+		}
+	} while (pmdp++, addr = next, addr != end);
+
+	return 1;
+}
+
+static noinline int gup_huge_pud(pud_t pud, unsigned long addr,
+		unsigned long end, int write, struct page **pages, int *nr)
+{
+	unsigned long mask;
+	pte_t pte = *(pte_t *)&pud;
+	struct page *head, *page;
+	int refs;
+
+	mask = _PAGE_PRESENT|_PAGE_USER;
+	if (write)
+		mask |= _PAGE_RW;
+	if ((pte_val(pte) & mask) != mask)
+		return 0;
+	/* hugepages are never "special" */
+	VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL);
+	VM_BUG_ON(!pfn_valid(pte_pfn(pte)));
+
+	refs = 0;
+	head = pte_page(pte);
+	page = head + ((addr & ~PUD_MASK) >> PAGE_SHIFT);
+	do {
+		VM_BUG_ON(compound_head(page) != head);
+		pages[*nr] = page;
+		(*nr)++;
+		page++;
+		refs++;
+	} while (addr += PAGE_SIZE, addr != end);
+	get_head_page_multiple(head, refs);
+
+	return 1;
+}
+
+static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end,
+			int write, struct page **pages, int *nr)
+{
+	unsigned long next;
+	pud_t *pudp;
+
+	pudp = pud_offset(&pgd, addr);
+	do {
+		pud_t pud = *pudp;
+
+		next = pud_addr_end(addr, end);
+		if (pud_none(pud))
+			return 0;
+		if (unlikely(pud_large(pud))) {
+			if (!gup_huge_pud(pud, addr, next, write, pages, nr))
+				return 0;
+		} else {
+			if (!gup_pmd_range(pud, addr, next, write, pages, nr))
+				return 0;
+		}
+	} while (pudp++, addr = next, addr != end);
+
+	return 1;
+}
+
+int get_user_pages_fast(unsigned long start, int nr_pages, int write,
+			struct page **pages)
+{
+	struct mm_struct *mm = current->mm;
+	unsigned long addr, len, end;
+	unsigned long next;
+	pgd_t *pgdp;
+	int nr = 0;
+
+	start &= PAGE_MASK;
+	addr = start;
+	len = (unsigned long) nr_pages << PAGE_SHIFT;
+	end = start + len;
+	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
+					start, len)))
+		goto slow_irqon;
+
+	/*
+	 * XXX: batch / limit 'nr', to avoid large irq off latency
+	 * needs some instrumenting to determine the common sizes used by
+	 * important workloads (eg. DB2), and whether limiting the batch size
+	 * will decrease performance.
+	 *
+	 * It seems like we're in the clear for the moment. Direct-IO is
+	 * the main guy that batches up lots of get_user_pages, and even
+	 * they are limited to 64-at-a-time which is not so many.
+	 */
+	/*
+	 * This doesn't prevent pagetable teardown, but does prevent
+	 * the pagetables and pages from being freed on x86.
+	 *
+	 * So long as we atomically load page table pointers versus teardown
+	 * (which we do on x86, with the above PAE exception), we can follow the
+	 * address down to the the page and take a ref on it.
+	 */
+	local_irq_disable();
+	pgdp = pgd_offset(mm, addr);
+	do {
+		pgd_t pgd = *pgdp;
+
+		next = pgd_addr_end(addr, end);
+		if (pgd_none(pgd))
+			goto slow;
+		if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+			goto slow;
+	} while (pgdp++, addr = next, addr != end);
+	local_irq_enable();
+
+	VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT);
+	return nr;
+
+	{
+		int ret;
+
+slow:
+		local_irq_enable();
+slow_irqon:
+		/* Try to get the remaining pages with get_user_pages */
+		start += nr << PAGE_SHIFT;
+		pages += nr;
+
+		down_read(&mm->mmap_sem);
+		ret = get_user_pages(current, mm, start,
+			(end - start) >> PAGE_SHIFT, write, 0, pages, NULL);
+		up_read(&mm->mmap_sem);
+
+		/* Have to be a bit careful with return values */
+		if (nr > 0) {
+			if (ret < 0)
+				ret = nr;
+			else
+				ret += nr;
+		}
+
+		return ret;
+	}
+}
diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
index 0b3d567e686d..8f307d914c2e 100644
--- a/arch/x86/mm/hugetlbpage.c
+++ b/arch/x86/mm/hugetlbpage.c
@@ -124,7 +124,8 @@ int huge_pmd_unshare(struct mm_struct *mm, unsigned long *addr, pte_t *ptep)
 	return 1;
 }
 
-pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
+pte_t *huge_pte_alloc(struct mm_struct *mm,
+			unsigned long addr, unsigned long sz)
 {
 	pgd_t *pgd;
 	pud_t *pud;
@@ -133,9 +134,14 @@ pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr)
 	pgd = pgd_offset(mm, addr);
 	pud = pud_alloc(mm, pgd, addr);
 	if (pud) {
-		if (pud_none(*pud))
-			huge_pmd_share(mm, addr, pud);
-		pte = (pte_t *) pmd_alloc(mm, pud, addr);
+		if (sz == PUD_SIZE) {
+			pte = (pte_t *)pud;
+		} else {
+			BUG_ON(sz != PMD_SIZE);
+			if (pud_none(*pud))
+				huge_pmd_share(mm, addr, pud);
+			pte = (pte_t *) pmd_alloc(mm, pud, addr);
+		}
 	}
 	BUG_ON(pte && !pte_none(*pte) && !pte_huge(*pte));
 
@@ -151,8 +157,11 @@ pte_t *huge_pte_offset(struct mm_struct *mm, unsigned long addr)
 	pgd = pgd_offset(mm, addr);
 	if (pgd_present(*pgd)) {
 		pud = pud_offset(pgd, addr);
-		if (pud_present(*pud))
+		if (pud_present(*pud)) {
+			if (pud_large(*pud))
+				return (pte_t *)pud;
 			pmd = pmd_offset(pud, addr);
+		}
 	}
 	return (pte_t *) pmd;
 }
@@ -188,6 +197,11 @@ int pmd_huge(pmd_t pmd)
 	return 0;
 }
 
+int pud_huge(pud_t pud)
+{
+	return 0;
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 		pmd_t *pmd, int write)
@@ -208,6 +222,11 @@ int pmd_huge(pmd_t pmd)
 	return !!(pmd_val(pmd) & _PAGE_PSE);
 }
 
+int pud_huge(pud_t pud)
+{
+	return !!(pud_val(pud) & _PAGE_PSE);
+}
+
 struct page *
 follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 		pmd_t *pmd, int write)
@@ -216,9 +235,22 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address,
 
 	page = pte_page(*(pte_t *)pmd);
 	if (page)
-		page += ((address & ~HPAGE_MASK) >> PAGE_SHIFT);
+		page += ((address & ~PMD_MASK) >> PAGE_SHIFT);
+	return page;
+}
+
+struct page *
+follow_huge_pud(struct mm_struct *mm, unsigned long address,
+		pud_t *pud, int write)
+{
+	struct page *page;
+
+	page = pte_page(*(pte_t *)pud);
+	if (page)
+		page += ((address & ~PUD_MASK) >> PAGE_SHIFT);
 	return page;
 }
+
 #endif
 
 /* x86_64 also uses this file */
@@ -228,6 +260,7 @@ static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file,
 		unsigned long addr, unsigned long len,
 		unsigned long pgoff, unsigned long flags)
 {
+	struct hstate *h = hstate_file(file);
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 	unsigned long start_addr;
@@ -240,7 +273,7 @@ static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file,
 	}
 
 full_search:
-	addr = ALIGN(start_addr, HPAGE_SIZE);
+	addr = ALIGN(start_addr, huge_page_size(h));
 
 	for (vma = find_vma(mm, addr); ; vma = vma->vm_next) {
 		/* At this point:  (!vma || addr < vma->vm_end). */
@@ -262,7 +295,7 @@ full_search:
 		}
 		if (addr + mm->cached_hole_size < vma->vm_start)
 		        mm->cached_hole_size = vma->vm_start - addr;
-		addr = ALIGN(vma->vm_end, HPAGE_SIZE);
+		addr = ALIGN(vma->vm_end, huge_page_size(h));
 	}
 }
 
@@ -270,6 +303,7 @@ static unsigned long hugetlb_get_unmapped_area_topdown(struct file *file,
 		unsigned long addr0, unsigned long len,
 		unsigned long pgoff, unsigned long flags)
 {
+	struct hstate *h = hstate_file(file);
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma, *prev_vma;
 	unsigned long base = mm->mmap_base, addr = addr0;
@@ -290,7 +324,7 @@ try_again:
 		goto fail;
 
 	/* either no address requested or cant fit in requested address hole */
-	addr = (mm->free_area_cache - len) & HPAGE_MASK;
+	addr = (mm->free_area_cache - len) & huge_page_mask(h);
 	do {
 		/*
 		 * Lookup failure means no vma is above this address,
@@ -321,7 +355,7 @@ try_again:
 		        largest_hole = vma->vm_start - addr;
 
 		/* try just below the current vma->vm_start */
-		addr = (vma->vm_start - len) & HPAGE_MASK;
+		addr = (vma->vm_start - len) & huge_page_mask(h);
 	} while (len <= vma->vm_start);
 
 fail:
@@ -359,22 +393,23 @@ unsigned long
 hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 		unsigned long len, unsigned long pgoff, unsigned long flags)
 {
+	struct hstate *h = hstate_file(file);
 	struct mm_struct *mm = current->mm;
 	struct vm_area_struct *vma;
 
-	if (len & ~HPAGE_MASK)
+	if (len & ~huge_page_mask(h))
 		return -EINVAL;
 	if (len > TASK_SIZE)
 		return -ENOMEM;
 
 	if (flags & MAP_FIXED) {
-		if (prepare_hugepage_range(addr, len))
+		if (prepare_hugepage_range(file, addr, len))
 			return -EINVAL;
 		return addr;
 	}
 
 	if (addr) {
-		addr = ALIGN(addr, HPAGE_SIZE);
+		addr = ALIGN(addr, huge_page_size(h));
 		vma = find_vma(mm, addr);
 		if (TASK_SIZE - len >= addr &&
 		    (!vma || addr + len <= vma->vm_start))
@@ -390,3 +425,20 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
 
 #endif /*HAVE_ARCH_HUGETLB_UNMAPPED_AREA*/
 
+#ifdef CONFIG_X86_64
+static __init int setup_hugepagesz(char *opt)
+{
+	unsigned long ps = memparse(opt, &opt);
+	if (ps == PMD_SIZE) {
+		hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT);
+	} else if (ps == PUD_SIZE && cpu_has_gbpages) {
+		hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT);
+	} else {
+		printk(KERN_ERR "hugepagesz: Unsupported page size %lu M\n",
+			ps >> 20);
+		return 0;
+	}
+	return 1;
+}
+__setup("hugepagesz=", setup_hugepagesz);
+#endif
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 9689a5138e64..d37f29376b0c 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -844,6 +844,9 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
 		reserve_early(table_start << PAGE_SHIFT,
 				 table_end << PAGE_SHIFT, "PGTABLE");
 
+	if (!after_init_bootmem)
+		early_memtest(start, end);
+
 	return end >> PAGE_SHIFT;
 }
 
@@ -868,8 +871,6 @@ void __init paging_init(void)
 	 */
 	sparse_init();
 	zone_sizes_init();
-
-	paravirt_post_allocator_init();
 }
 
 /*
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 27de2435e008..129618ca0ea2 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -86,43 +86,6 @@ early_param("gbpages", parse_direct_gbpages_on);
  * around without checking the pgd every time.
  */
 
-void show_mem(void)
-{
-	long i, total = 0, reserved = 0;
-	long shared = 0, cached = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-			/*
-			 * This loop can take a while with 256 GB and
-			 * 4k pages so defer the NMI watchdog:
-			 */
-			if (unlikely(i % MAX_ORDER_NR_PAGES == 0))
-				touch_nmi_watchdog();
-
-			if (!pfn_valid(pgdat->node_start_pfn + i))
-				continue;
-
-			page = pfn_to_page(pgdat->node_start_pfn + i);
-			total++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-	}
-	printk(KERN_INFO "%lu pages of RAM\n",		total);
-	printk(KERN_INFO "%lu reserved pages\n",	reserved);
-	printk(KERN_INFO "%lu pages shared\n",		shared);
-	printk(KERN_INFO "%lu pages swap cached\n",	cached);
-}
-
 int after_bootmem;
 
 static __init void *spp_getpage(void)
@@ -517,118 +480,6 @@ static void __init init_gbpages(void)
 		direct_gbpages = 0;
 }
 
-#ifdef CONFIG_MEMTEST
-
-static void __init memtest(unsigned long start_phys, unsigned long size,
-				 unsigned pattern)
-{
-	unsigned long i;
-	unsigned long *start;
-	unsigned long start_bad;
-	unsigned long last_bad;
-	unsigned long val;
-	unsigned long start_phys_aligned;
-	unsigned long count;
-	unsigned long incr;
-
-	switch (pattern) {
-	case 0:
-		val = 0UL;
-		break;
-	case 1:
-		val = -1UL;
-		break;
-	case 2:
-		val = 0x5555555555555555UL;
-		break;
-	case 3:
-		val = 0xaaaaaaaaaaaaaaaaUL;
-		break;
-	default:
-		return;
-	}
-
-	incr = sizeof(unsigned long);
-	start_phys_aligned = ALIGN(start_phys, incr);
-	count = (size - (start_phys_aligned - start_phys))/incr;
-	start = __va(start_phys_aligned);
-	start_bad = 0;
-	last_bad = 0;
-
-	for (i = 0; i < count; i++)
-		start[i] = val;
-	for (i = 0; i < count; i++, start++, start_phys_aligned += incr) {
-		if (*start != val) {
-			if (start_phys_aligned == last_bad + incr) {
-				last_bad += incr;
-			} else {
-				if (start_bad) {
-					printk(KERN_CONT "\n  %016lx bad mem addr %016lx - %016lx reserved",
-						val, start_bad, last_bad + incr);
-					reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
-				}
-				start_bad = last_bad = start_phys_aligned;
-			}
-		}
-	}
-	if (start_bad) {
-		printk(KERN_CONT "\n  %016lx bad mem addr %016lx - %016lx reserved",
-			val, start_bad, last_bad + incr);
-		reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
-	}
-
-}
-
-/* default is disabled */
-static int memtest_pattern __initdata;
-
-static int __init parse_memtest(char *arg)
-{
-	if (arg)
-		memtest_pattern = simple_strtoul(arg, NULL, 0);
-	return 0;
-}
-
-early_param("memtest", parse_memtest);
-
-static void __init early_memtest(unsigned long start, unsigned long end)
-{
-	u64 t_start, t_size;
-	unsigned pattern;
-
-	if (!memtest_pattern)
-		return;
-
-	printk(KERN_INFO "early_memtest: pattern num %d", memtest_pattern);
-	for (pattern = 0; pattern < memtest_pattern; pattern++) {
-		t_start = start;
-		t_size = 0;
-		while (t_start < end) {
-			t_start = find_e820_area_size(t_start, &t_size, 1);
-
-			/* done ? */
-			if (t_start >= end)
-				break;
-			if (t_start + t_size > end)
-				t_size = end - t_start;
-
-			printk(KERN_CONT "\n  %016llx - %016llx pattern %d",
-				(unsigned long long)t_start,
-				(unsigned long long)t_start + t_size, pattern);
-
-			memtest(t_start, t_size, pattern);
-
-			t_start += t_size;
-		}
-	}
-	printk(KERN_CONT "\n");
-}
-#else
-static void __init early_memtest(unsigned long start, unsigned long end)
-{
-}
-#endif
-
 static unsigned long __init kernel_physical_mapping_init(unsigned long start,
 						unsigned long end,
 						unsigned long page_size_mask)
@@ -644,7 +495,7 @@ static unsigned long __init kernel_physical_mapping_init(unsigned long start,
 		unsigned long pud_phys;
 		pud_t *pud;
 
-		next = start + PGDIR_SIZE;
+		next = (start + PGDIR_SIZE) & PGDIR_MASK;
 		if (next > end)
 			next = end;
 
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 24c1d3c30186..016f335bbeea 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -330,6 +330,14 @@ static void __iomem *ioremap_default(resource_size_t phys_addr,
 	return (void __iomem *)ret;
 }
 
+void __iomem *ioremap_prot(resource_size_t phys_addr, unsigned long size,
+				unsigned long prot_val)
+{
+	return __ioremap_caller(phys_addr, size, (prot_val & _PAGE_CACHE_MASK),
+				__builtin_return_address(0));
+}
+EXPORT_SYMBOL(ioremap_prot);
+
 /**
  * iounmap - Free a IO remapping
  * @addr: virtual address from ioremap_*
diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c
new file mode 100644
index 000000000000..672e17f8262a
--- /dev/null
+++ b/arch/x86/mm/memtest.c
@@ -0,0 +1,123 @@
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <linux/pfn.h>
+
+#include <asm/e820.h>
+
+static void __init memtest(unsigned long start_phys, unsigned long size,
+				 unsigned pattern)
+{
+	unsigned long i;
+	unsigned long *start;
+	unsigned long start_bad;
+	unsigned long last_bad;
+	unsigned long val;
+	unsigned long start_phys_aligned;
+	unsigned long count;
+	unsigned long incr;
+
+	switch (pattern) {
+	case 0:
+		val = 0UL;
+		break;
+	case 1:
+		val = -1UL;
+		break;
+	case 2:
+#ifdef CONFIG_X86_64
+		val = 0x5555555555555555UL;
+#else
+		val = 0x55555555UL;
+#endif
+		break;
+	case 3:
+#ifdef CONFIG_X86_64
+		val = 0xaaaaaaaaaaaaaaaaUL;
+#else
+		val = 0xaaaaaaaaUL;
+#endif
+		break;
+	default:
+		return;
+	}
+
+	incr = sizeof(unsigned long);
+	start_phys_aligned = ALIGN(start_phys, incr);
+	count = (size - (start_phys_aligned - start_phys))/incr;
+	start = __va(start_phys_aligned);
+	start_bad = 0;
+	last_bad = 0;
+
+	for (i = 0; i < count; i++)
+		start[i] = val;
+	for (i = 0; i < count; i++, start++, start_phys_aligned += incr) {
+		if (*start != val) {
+			if (start_phys_aligned == last_bad + incr) {
+				last_bad += incr;
+			} else {
+				if (start_bad) {
+					printk(KERN_CONT "\n  %010lx bad mem addr %010lx - %010lx reserved",
+						val, start_bad, last_bad + incr);
+					reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
+				}
+				start_bad = last_bad = start_phys_aligned;
+			}
+		}
+	}
+	if (start_bad) {
+		printk(KERN_CONT "\n  %016lx bad mem addr %010lx - %010lx reserved",
+			val, start_bad, last_bad + incr);
+		reserve_early(start_bad, last_bad - start_bad, "BAD RAM");
+	}
+
+}
+
+/* default is disabled */
+static int memtest_pattern __initdata;
+
+static int __init parse_memtest(char *arg)
+{
+	if (arg)
+		memtest_pattern = simple_strtoul(arg, NULL, 0);
+	return 0;
+}
+
+early_param("memtest", parse_memtest);
+
+void __init early_memtest(unsigned long start, unsigned long end)
+{
+	u64 t_start, t_size;
+	unsigned pattern;
+
+	if (!memtest_pattern)
+		return;
+
+	printk(KERN_INFO "early_memtest: pattern num %d", memtest_pattern);
+	for (pattern = 0; pattern < memtest_pattern; pattern++) {
+		t_start = start;
+		t_size = 0;
+		while (t_start < end) {
+			t_start = find_e820_area_size(t_start, &t_size, 1);
+
+			/* done ? */
+			if (t_start >= end)
+				break;
+			if (t_start + t_size > end)
+				t_size = end - t_start;
+
+			printk(KERN_CONT "\n  %010llx - %010llx pattern %d",
+				(unsigned long long)t_start,
+				(unsigned long long)t_start + t_size, pattern);
+
+			memtest(t_start, t_size, pattern);
+
+			t_start += t_size;
+		}
+	}
+	printk(KERN_CONT "\n");
+}
diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c
index b432d5781773..a4dd793d6003 100644
--- a/arch/x86/mm/numa_64.c
+++ b/arch/x86/mm/numa_64.c
@@ -20,15 +20,9 @@
 #include <asm/acpi.h>
 #include <asm/k8.h>
 
-#ifndef Dprintk
-#define Dprintk(x...)
-#endif
-
 struct pglist_data *node_data[MAX_NUMNODES] __read_mostly;
 EXPORT_SYMBOL(node_data);
 
-static bootmem_data_t plat_node_bdata[MAX_NUMNODES];
-
 struct memnode memnode;
 
 s16 apicid_to_node[MAX_LOCAL_APIC] __cpuinitdata = {
@@ -202,7 +196,7 @@ void __init setup_node_bootmem(int nodeid, unsigned long start,
 		nodedata_phys + pgdat_size - 1);
 
 	memset(NODE_DATA(nodeid), 0, sizeof(pg_data_t));
-	NODE_DATA(nodeid)->bdata = &plat_node_bdata[nodeid];
+	NODE_DATA(nodeid)->bdata = &bootmem_node_data[nodeid];
 	NODE_DATA(nodeid)->node_start_pfn = start_pfn;
 	NODE_DATA(nodeid)->node_spanned_pages = last_pfn - start_pfn;
 
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 47f4e2e4a096..65c6e46bf059 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -141,7 +141,7 @@ static void cpa_flush_all(unsigned long cache)
 {
 	BUG_ON(irqs_disabled());
 
-	on_each_cpu(__cpa_flush_all, (void *) cache, 1, 1);
+	on_each_cpu(__cpa_flush_all, (void *) cache, 1);
 }
 
 static void __cpa_flush_range(void *arg)
@@ -162,7 +162,7 @@ static void cpa_flush_range(unsigned long start, int numpages, int cache)
 	BUG_ON(irqs_disabled());
 	WARN_ON(PAGE_ALIGN(start) != start);
 
-	on_each_cpu(__cpa_flush_range, NULL, 1, 1);
+	on_each_cpu(__cpa_flush_range, NULL, 1);
 
 	if (!cache)
 		return;
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index d4585077977a..2fe30916d4b6 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -12,6 +12,8 @@
 #include <linux/gfp.h>
 #include <linux/fs.h>
 #include <linux/bootmem.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
 
 #include <asm/msr.h>
 #include <asm/tlbflush.h>
@@ -373,8 +375,8 @@ pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
 	return vma_prot;
 }
 
-#ifdef CONFIG_NONPROMISC_DEVMEM
-/* This check is done in drivers/char/mem.c in case of NONPROMISC_DEVMEM*/
+#ifdef CONFIG_STRICT_DEVMEM
+/* This check is done in drivers/char/mem.c in case of STRICT_DEVMEM*/
 static inline int range_is_allowed(unsigned long pfn, unsigned long size)
 {
 	return 1;
@@ -398,7 +400,7 @@ static inline int range_is_allowed(unsigned long pfn, unsigned long size)
 	}
 	return 1;
 }
-#endif /* CONFIG_NONPROMISC_DEVMEM */
+#endif /* CONFIG_STRICT_DEVMEM */
 
 int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
 				unsigned long size, pgprot_t *vma_prot)
@@ -489,3 +491,89 @@ void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
 
 	free_memtype(addr, addr + size);
 }
+
+#if defined(CONFIG_DEBUG_FS)
+
+/* get Nth element of the linked list */
+static struct memtype *memtype_get_idx(loff_t pos)
+{
+	struct memtype *list_node, *print_entry;
+	int i = 1;
+
+	print_entry  = kmalloc(sizeof(struct memtype), GFP_KERNEL);
+	if (!print_entry)
+		return NULL;
+
+	spin_lock(&memtype_lock);
+	list_for_each_entry(list_node, &memtype_list, nd) {
+		if (pos == i) {
+			*print_entry = *list_node;
+			spin_unlock(&memtype_lock);
+			return print_entry;
+		}
+		++i;
+	}
+	spin_unlock(&memtype_lock);
+	kfree(print_entry);
+	return NULL;
+}
+
+static void *memtype_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	if (*pos == 0) {
+		++*pos;
+		seq_printf(seq, "PAT memtype list:\n");
+	}
+
+	return memtype_get_idx(*pos);
+}
+
+static void *memtype_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	++*pos;
+	return memtype_get_idx(*pos);
+}
+
+static void memtype_seq_stop(struct seq_file *seq, void *v)
+{
+}
+
+static int memtype_seq_show(struct seq_file *seq, void *v)
+{
+	struct memtype *print_entry = (struct memtype *)v;
+
+	seq_printf(seq, "%s @ 0x%Lx-0x%Lx\n", cattr_name(print_entry->type),
+			print_entry->start, print_entry->end);
+	kfree(print_entry);
+	return 0;
+}
+
+static struct seq_operations memtype_seq_ops = {
+	.start = memtype_seq_start,
+	.next  = memtype_seq_next,
+	.stop  = memtype_seq_stop,
+	.show  = memtype_seq_show,
+};
+
+static int memtype_seq_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &memtype_seq_ops);
+}
+
+static const struct file_operations memtype_fops = {
+	.open    = memtype_seq_open,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = seq_release,
+};
+
+static int __init pat_memtype_list_init(void)
+{
+	debugfs_create_file("pat_memtype_list", S_IRUSR, arch_debugfs_dir,
+				NULL, &memtype_fops);
+	return 0;
+}
+
+late_initcall(pat_memtype_list_init);
+
+#endif /* CONFIG_DEBUG_FS */
diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c
index b4becbf8c570..cab0abbd1ebe 100644
--- a/arch/x86/mm/pgtable_32.c
+++ b/arch/x86/mm/pgtable_32.c
@@ -20,53 +20,6 @@
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 
-void show_mem(void)
-{
-	int total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-	int highmem = 0;
-	struct page *page;
-	pg_data_t *pgdat;
-	unsigned long i;
-	unsigned long flags;
-
-	printk(KERN_INFO "Mem-info:\n");
-	show_free_areas();
-	for_each_online_pgdat(pgdat) {
-		pgdat_resize_lock(pgdat, &flags);
-		for (i = 0; i < pgdat->node_spanned_pages; ++i) {
-			if (unlikely(i % MAX_ORDER_NR_PAGES == 0))
-				touch_nmi_watchdog();
-			page = pgdat_page_nr(pgdat, i);
-			total++;
-			if (PageHighMem(page))
-				highmem++;
-			if (PageReserved(page))
-				reserved++;
-			else if (PageSwapCache(page))
-				cached++;
-			else if (page_count(page))
-				shared += page_count(page) - 1;
-		}
-		pgdat_resize_unlock(pgdat, &flags);
-	}
-	printk(KERN_INFO "%d pages of RAM\n", total);
-	printk(KERN_INFO "%d pages of HIGHMEM\n", highmem);
-	printk(KERN_INFO "%d reserved pages\n", reserved);
-	printk(KERN_INFO "%d pages shared\n", shared);
-	printk(KERN_INFO "%d pages swap cached\n", cached);
-
-	printk(KERN_INFO "%lu pages dirty\n", global_page_state(NR_FILE_DIRTY));
-	printk(KERN_INFO "%lu pages writeback\n",
-					global_page_state(NR_WRITEBACK));
-	printk(KERN_INFO "%lu pages mapped\n", global_page_state(NR_FILE_MAPPED));
-	printk(KERN_INFO "%lu pages slab\n",
-		global_page_state(NR_SLAB_RECLAIMABLE) +
-		global_page_state(NR_SLAB_UNRECLAIMABLE));
-	printk(KERN_INFO "%lu pages pagetables\n",
-					global_page_state(NR_PAGETABLE));
-}
-
 /*
  * Associate a virtual page frame with a given physical page frame 
  * and protection flags for that frame.
diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
index f41d67f8f831..1eb2973a301c 100644
--- a/arch/x86/mm/srat_32.c
+++ b/arch/x86/mm/srat_32.c
@@ -156,10 +156,9 @@ acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *memory_affinity)
 
 	num_memory_chunks++;
 
-	printk(KERN_DEBUG "Memory range %08lx to %08lx (type %x)"
+	printk(KERN_DEBUG "Memory range %08lx to %08lx"
 			  " in proximity domain %02x %s\n",
 		start_pfn, end_pfn,
-		memory_affinity->memory_type,
 		pxm,
 		((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ?
 		 "enabled and removable" : "enabled" ) );
diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c
index 2b6ad5b9f9d5..3f90289410e6 100644
--- a/arch/x86/oprofile/nmi_int.c
+++ b/arch/x86/oprofile/nmi_int.c
@@ -218,8 +218,8 @@ static int nmi_setup(void)
 		}
 
 	}
-	on_each_cpu(nmi_save_registers, NULL, 0, 1);
-	on_each_cpu(nmi_cpu_setup, NULL, 0, 1);
+	on_each_cpu(nmi_save_registers, NULL, 1);
+	on_each_cpu(nmi_cpu_setup, NULL, 1);
 	nmi_enabled = 1;
 	return 0;
 }
@@ -271,7 +271,7 @@ static void nmi_shutdown(void)
 {
 	struct op_msrs *msrs = &get_cpu_var(cpu_msrs);
 	nmi_enabled = 0;
-	on_each_cpu(nmi_cpu_shutdown, NULL, 0, 1);
+	on_each_cpu(nmi_cpu_shutdown, NULL, 1);
 	unregister_die_notifier(&profile_exceptions_nb);
 	model->shutdown(msrs);
 	free_msrs();
@@ -286,7 +286,7 @@ static void nmi_cpu_start(void *dummy)
 
 static int nmi_start(void)
 {
-	on_each_cpu(nmi_cpu_start, NULL, 0, 1);
+	on_each_cpu(nmi_cpu_start, NULL, 1);
 	return 0;
 }
 
@@ -298,7 +298,7 @@ static void nmi_cpu_stop(void *dummy)
 
 static void nmi_stop(void)
 {
-	on_each_cpu(nmi_cpu_stop, NULL, 0, 1);
+	on_each_cpu(nmi_cpu_stop, NULL, 1);
 }
 
 struct op_counter_config counter_config[OP_MAX_COUNTER];
@@ -369,20 +369,34 @@ static int __init ppro_init(char **cpu_type)
 {
 	__u8 cpu_model = boot_cpu_data.x86_model;
 
-	if (cpu_model == 14)
+	switch (cpu_model) {
+	case 0 ... 2:
+		*cpu_type = "i386/ppro";
+		break;
+	case 3 ... 5:
+		*cpu_type = "i386/pii";
+		break;
+	case 6 ... 8:
+		*cpu_type = "i386/piii";
+		break;
+	case 9:
+		*cpu_type = "i386/p6_mobile";
+		break;
+	case 10 ... 13:
+		*cpu_type = "i386/p6";
+		break;
+	case 14:
 		*cpu_type = "i386/core";
-	else if (cpu_model == 15 || cpu_model == 23)
+		break;
+	case 15: case 23:
+		*cpu_type = "i386/core_2";
+		break;
+	case 26:
 		*cpu_type = "i386/core_2";
-	else if (cpu_model > 0xd)
+		break;
+	default:
+		/* Unknown */
 		return 0;
-	else if (cpu_model == 9) {
-		*cpu_type = "i386/p6_mobile";
-	} else if (cpu_model > 5) {
-		*cpu_type = "i386/piii";
-	} else if (cpu_model > 2) {
-		*cpu_type = "i386/pii";
-	} else {
-		*cpu_type = "i386/ppro";
 	}
 
 	model = &op_ppro_spec;
diff --git a/arch/x86/pci/Makefile b/arch/x86/pci/Makefile
index e515e8db842a..d49202e740ea 100644
--- a/arch/x86/pci/Makefile
+++ b/arch/x86/pci/Makefile
@@ -5,13 +5,13 @@ obj-$(CONFIG_PCI_MMCONFIG)	+= mmconfig_$(BITS).o direct.o mmconfig-shared.o
 obj-$(CONFIG_PCI_DIRECT)	+= direct.o
 obj-$(CONFIG_PCI_OLPC)		+= olpc.o
 
-pci-y				:= fixup.o
-pci-$(CONFIG_ACPI)		+= acpi.o
-pci-y				+= legacy.o irq.o
+obj-y				+= fixup.o
+obj-$(CONFIG_ACPI)		+= acpi.o
+obj-y				+= legacy.o irq.o
 
-pci-$(CONFIG_X86_VISWS)		+= visws.o
+obj-$(CONFIG_X86_VISWS)		+= visws.o
 
-pci-$(CONFIG_X86_NUMAQ)		+= numa.o
+obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 
-obj-y				+= $(pci-y) common.o early.o
+obj-y				+= common.o early.o
 obj-y				+= amd_bus.o
diff --git a/arch/x86/pci/amd_bus.c b/arch/x86/pci/amd_bus.c
index a18141ae3f02..dbf532369711 100644
--- a/arch/x86/pci/amd_bus.c
+++ b/arch/x86/pci/amd_bus.c
@@ -578,7 +578,7 @@ static int __init enable_pci_io_ecs(void)
 	/* assume all cpus from fam10h have IO ECS */
         if (boot_cpu_data.x86 < 0x10)
 		return 0;
-	on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1, 1);
+	on_each_cpu(enable_pci_io_ecs_per_cpu, NULL, 1);
 	pci_probe |= PCI_HAS_IO_ECS;
 	return 0;
 }
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 20b9f59f95df..b67732bbb85a 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -20,6 +20,7 @@
 unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
 				PCI_PROBE_MMCONF;
 
+unsigned int pci_early_dump_regs;
 static int pci_bf_sort;
 int pci_routeirq;
 int pcibios_last_bus = -1;
@@ -31,7 +32,7 @@ struct pci_raw_ops *raw_pci_ext_ops;
 int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
 						int reg, int len, u32 *val)
 {
-	if (reg < 256 && raw_pci_ops)
+	if (domain == 0 && reg < 256 && raw_pci_ops)
 		return raw_pci_ops->read(domain, bus, devfn, reg, len, val);
 	if (raw_pci_ext_ops)
 		return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val);
@@ -41,7 +42,7 @@ int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
 int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
 						int reg, int len, u32 val)
 {
-	if (reg < 256 && raw_pci_ops)
+	if (domain == 0 && reg < 256 && raw_pci_ops)
 		return raw_pci_ops->write(domain, bus, devfn, reg, len, val);
 	if (raw_pci_ext_ops)
 		return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val);
@@ -121,6 +122,21 @@ void __init dmi_check_skip_isa_align(void)
 	dmi_check_system(can_skip_pciprobe_dmi_table);
 }
 
+static void __devinit pcibios_fixup_device_resources(struct pci_dev *dev)
+{
+	struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
+
+	if (pci_probe & PCI_NOASSIGN_ROMS) {
+		if (rom_r->parent)
+			return;
+		if (rom_r->start) {
+			/* we deal with BIOS assigned ROM later */
+			return;
+		}
+		rom_r->start = rom_r->end = rom_r->flags = 0;
+	}
+}
+
 /*
  *  Called after each bus is probed, but before its children
  *  are examined.
@@ -128,7 +144,11 @@ void __init dmi_check_skip_isa_align(void)
 
 void __devinit  pcibios_fixup_bus(struct pci_bus *b)
 {
+	struct pci_dev *dev;
+
 	pci_read_bridge_bases(b);
+	list_for_each_entry(dev, &b->devices, bus_list)
+		pcibios_fixup_device_resources(dev);
 }
 
 /*
@@ -481,12 +501,18 @@ char * __devinit  pcibios_setup(char *str)
 	else if (!strcmp(str, "rom")) {
 		pci_probe |= PCI_ASSIGN_ROMS;
 		return NULL;
+	} else if (!strcmp(str, "norom")) {
+		pci_probe |= PCI_NOASSIGN_ROMS;
+		return NULL;
 	} else if (!strcmp(str, "assign-busses")) {
 		pci_probe |= PCI_ASSIGN_ALL_BUSSES;
 		return NULL;
 	} else if (!strcmp(str, "use_crs")) {
 		pci_probe |= PCI_USE__CRS;
 		return NULL;
+	} else if (!strcmp(str, "earlydump")) {
+		pci_early_dump_regs = 1;
+		return NULL;
 	} else if (!strcmp(str, "routeirq")) {
 		pci_routeirq = 1;
 		return NULL;
diff --git a/arch/x86/pci/early.c b/arch/x86/pci/early.c
index 42df4b6606df..86631ccbc25a 100644
--- a/arch/x86/pci/early.c
+++ b/arch/x86/pci/early.c
@@ -7,15 +7,13 @@
 /* Direct PCI access. This is used for PCI accesses in early boot before
    the PCI subsystem works. */
 
-#define PDprintk(x...)
-
 u32 read_pci_config(u8 bus, u8 slot, u8 func, u8 offset)
 {
 	u32 v;
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	v = inl(0xcfc);
 	if (v != 0xffffffff)
-		PDprintk("%x reading 4 from %x: %x\n", slot, offset, v);
+		pr_debug("%x reading 4 from %x: %x\n", slot, offset, v);
 	return v;
 }
 
@@ -24,7 +22,7 @@ u8 read_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset)
 	u8 v;
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	v = inb(0xcfc + (offset&3));
-	PDprintk("%x reading 1 from %x: %x\n", slot, offset, v);
+	pr_debug("%x reading 1 from %x: %x\n", slot, offset, v);
 	return v;
 }
 
@@ -33,23 +31,30 @@ u16 read_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset)
 	u16 v;
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	v = inw(0xcfc + (offset&2));
-	PDprintk("%x reading 2 from %x: %x\n", slot, offset, v);
+	pr_debug("%x reading 2 from %x: %x\n", slot, offset, v);
 	return v;
 }
 
 void write_pci_config(u8 bus, u8 slot, u8 func, u8 offset,
 				    u32 val)
 {
-	PDprintk("%x writing to %x: %x\n", slot, offset, val);
+	pr_debug("%x writing to %x: %x\n", slot, offset, val);
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
 	outl(val, 0xcfc);
 }
 
 void write_pci_config_byte(u8 bus, u8 slot, u8 func, u8 offset, u8 val)
 {
-	PDprintk("%x writing to %x: %x\n", slot, offset, val);
+	pr_debug("%x writing to %x: %x\n", slot, offset, val);
+	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
+	outb(val, 0xcfc + (offset&3));
+}
+
+void write_pci_config_16(u8 bus, u8 slot, u8 func, u8 offset, u16 val)
+{
+	pr_debug("%x writing to %x: %x\n", slot, offset, val);
 	outl(0x80000000 | (bus<<16) | (slot<<11) | (func<<8) | offset, 0xcf8);
-	outb(val, 0xcfc);
+	outw(val, 0xcfc + (offset&2));
 }
 
 int early_pci_allowed(void)
@@ -57,3 +62,54 @@ int early_pci_allowed(void)
 	return (pci_probe & (PCI_PROBE_CONF1|PCI_PROBE_NOEARLY)) ==
 			PCI_PROBE_CONF1;
 }
+
+void early_dump_pci_device(u8 bus, u8 slot, u8 func)
+{
+	int i;
+	int j;
+	u32 val;
+
+	printk(KERN_INFO "PCI: %02x:%02x:%02x", bus, slot, func);
+
+	for (i = 0; i < 256; i += 4) {
+		if (!(i & 0x0f))
+			printk("\n%04x:",i);
+
+		val = read_pci_config(bus, slot, func, i);
+		for (j = 0; j < 4; j++) {
+			printk(" %02x", val & 0xff);
+			val >>= 8;
+		}
+	}
+	printk("\n");
+}
+
+void early_dump_pci_devices(void)
+{
+	unsigned bus, slot, func;
+
+	if (!early_pci_allowed())
+		return;
+
+	for (bus = 0; bus < 256; bus++) {
+		for (slot = 0; slot < 32; slot++) {
+			for (func = 0; func < 8; func++) {
+				u32 class;
+				u8 type;
+				class = read_pci_config(bus, slot, func,
+							PCI_CLASS_REVISION);
+				if (class == 0xffffffff)
+					break;
+
+				early_dump_pci_device(bus, slot, func);
+
+				/* No multi-function device? */
+				type = read_pci_config_byte(bus, slot, func,
+							       PCI_HEADER_TYPE);
+				if (!(type & 0x80))
+					break;
+			}
+		}
+	}
+}
+
diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index ff3a6a336342..4bdaa590375d 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -23,7 +23,8 @@ static void __devinit pci_fixup_i450nx(struct pci_dev *d)
 		pci_read_config_byte(d, reg++, &busno);
 		pci_read_config_byte(d, reg++, &suba);
 		pci_read_config_byte(d, reg++, &subb);
-		DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
+		dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno,
+			suba, subb);
 		if (busno)
 			pci_scan_bus_with_sysdata(busno);	/* Bus A */
 		if (suba < subb)
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 2aafb67dc5f1..5807d1bc73f7 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -128,10 +128,8 @@ static void __init pcibios_allocate_bus_resources(struct list_head *bus_list)
 				pr = pci_find_parent_resource(dev, r);
 				if (!r->start || !pr ||
 				    request_resource(pr, r) < 0) {
-					printk(KERN_ERR "PCI: Cannot allocate "
-						"resource region %d "
-						"of bridge %s\n",
-						idx, pci_name(dev));
+					dev_err(&dev->dev, "BAR %d: can't "
+						"allocate resource\n", idx);
 					/*
 					 * Something is wrong with the region.
 					 * Invalidate the resource to prevent
@@ -166,15 +164,15 @@ static void __init pcibios_allocate_resources(int pass)
 			else
 				disabled = !(command & PCI_COMMAND_MEMORY);
 			if (pass == disabled) {
-				DBG("PCI: Resource %08lx-%08lx "
-				    "(f=%lx, d=%d, p=%d)\n",
-				    r->start, r->end, r->flags, disabled, pass);
+				dev_dbg(&dev->dev, "resource %#08llx-%#08llx "
+					"(f=%lx, d=%d, p=%d)\n",
+					(unsigned long long) r->start,
+					(unsigned long long) r->end,
+					r->flags, disabled, pass);
 				pr = pci_find_parent_resource(dev, r);
 				if (!pr || request_resource(pr, r) < 0) {
-					printk(KERN_ERR "PCI: Cannot allocate "
-						"resource region %d "
-						"of device %s\n",
-						idx, pci_name(dev));
+					dev_err(&dev->dev, "BAR %d: can't "
+						"allocate resource\n", idx);
 					/* We'll assign a new address later */
 					r->end -= r->start;
 					r->start = 0;
@@ -187,8 +185,7 @@ static void __init pcibios_allocate_resources(int pass)
 				/* Turn the ROM off, leave the resource region,
 				 * but keep it unregistered. */
 				u32 reg;
-				DBG("PCI: Switching off ROM of %s\n",
-					pci_name(dev));
+				dev_dbg(&dev->dev, "disabling ROM\n");
 				r->flags &= ~IORESOURCE_ROM_ENABLE;
 				pci_read_config_dword(dev,
 						dev->rom_base_reg, &reg);
@@ -257,8 +254,7 @@ void pcibios_set_master(struct pci_dev *dev)
 		lat = pcibios_max_latency;
 	else
 		return;
-	printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n",
-		pci_name(dev), lat);
+	dev_printk(KERN_DEBUG, &dev->dev, "setting latency timer to %d\n", lat);
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 }
 
@@ -280,6 +276,7 @@ static void pci_track_mmap_page_range(struct vm_area_struct *vma)
 static struct vm_operations_struct pci_mmap_ops = {
 	.open  = pci_track_mmap_page_range,
 	.close = pci_unmap_page_range,
+	.access = generic_access_phys,
 };
 
 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index dc568c6b83f8..fec0123b33a9 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -45,7 +45,8 @@ struct irq_router {
 	char *name;
 	u16 vendor, device;
 	int (*get)(struct pci_dev *router, struct pci_dev *dev, int pirq);
-	int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq, int new);
+	int (*set)(struct pci_dev *router, struct pci_dev *dev, int pirq,
+		int new);
 };
 
 struct irq_router_handler {
@@ -77,7 +78,8 @@ static inline struct irq_routing_table *pirq_check_routing_table(u8 *addr)
 	for (i = 0; i < rt->size; i++)
 		sum += addr[i];
 	if (!sum) {
-		DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n", rt);
+		DBG(KERN_DEBUG "PCI: Interrupt Routing Table found at 0x%p\n",
+			rt);
 		return rt;
 	}
 	return NULL;
@@ -183,7 +185,8 @@ static unsigned int read_config_nybble(struct pci_dev *router, unsigned offset,
 	return (nr & 1) ? (x >> 4) : (x & 0xf);
 }
 
-static void write_config_nybble(struct pci_dev *router, unsigned offset, unsigned nr, unsigned int val)
+static void write_config_nybble(struct pci_dev *router, unsigned offset,
+	unsigned nr, unsigned int val)
 {
 	u8 x;
 	unsigned reg = offset + (nr >> 1);
@@ -433,7 +436,7 @@ static int pirq_vlsi_get(struct pci_dev *router, struct pci_dev *dev, int pirq)
 {
 	WARN_ON_ONCE(pirq >= 9);
 	if (pirq > 8) {
-		printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+		dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
 		return 0;
 	}
 	return read_config_nybble(router, 0x74, pirq-1);
@@ -443,7 +446,7 @@ static int pirq_vlsi_set(struct pci_dev *router, struct pci_dev *dev, int pirq,
 {
 	WARN_ON_ONCE(pirq >= 9);
 	if (pirq > 8) {
-		printk(KERN_INFO "VLSI router pirq escape (%d)\n", pirq);
+		dev_info(&dev->dev, "VLSI router PIRQ escape (%d)\n", pirq);
 		return 0;
 	}
 	write_config_nybble(router, 0x74, pirq-1, irq);
@@ -467,7 +470,8 @@ static int pirq_serverworks_get(struct pci_dev *router, struct pci_dev *dev, int
 	return inb(0xc01) & 0xf;
 }
 
-static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
+static int pirq_serverworks_set(struct pci_dev *router, struct pci_dev *dev,
+	int pirq, int irq)
 {
 	outb(pirq, 0xc00);
 	outb(irq, 0xc01);
@@ -488,15 +492,17 @@ static int pirq_amd756_get(struct pci_dev *router, struct pci_dev *dev, int pirq
 	irq = 0;
 	if (pirq <= 4)
 		irq = read_config_nybble(router, 0x56, pirq - 1);
-	printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d get irq : %2d\n",
-		dev->vendor, dev->device, pirq, irq);
+	dev_info(&dev->dev,
+		 "AMD756: dev [%04x/%04x], router PIRQ %d get IRQ %d\n",
+		 dev->vendor, dev->device, pirq, irq);
 	return irq;
 }
 
 static int pirq_amd756_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq)
 {
-	printk(KERN_INFO "AMD756: dev %04x:%04x, router pirq : %d SET irq : %2d\n",
-		dev->vendor, dev->device, pirq, irq);
+	dev_info(&dev->dev,
+		 "AMD756: dev [%04x/%04x], router PIRQ %d set IRQ %d\n",
+		 dev->vendor, dev->device, pirq, irq);
 	if (pirq <= 4)
 		write_config_nybble(router, 0x56, pirq - 1, irq);
 	return 1;
@@ -660,7 +666,8 @@ static __init int vlsi_router_probe(struct irq_router *r, struct pci_dev *router
 }
 
 
-static __init int serverworks_router_probe(struct irq_router *r, struct pci_dev *router, u16 device)
+static __init int serverworks_router_probe(struct irq_router *r,
+		struct pci_dev *router, u16 device)
 {
 	switch (device) {
 	case PCI_DEVICE_ID_SERVERWORKS_OSB4:
@@ -725,7 +732,6 @@ static __init int ali_router_probe(struct irq_router *r, struct pci_dev *router,
 	switch (device) {
 	case PCI_DEVICE_ID_AL_M1533:
 	case PCI_DEVICE_ID_AL_M1563:
-		printk(KERN_DEBUG "PCI: Using ALI IRQ Router\n");
 		r->name = "ALI";
 		r->get = pirq_ali_get;
 		r->set = pirq_ali_set;
@@ -827,17 +833,17 @@ static void __init pirq_find_router(struct irq_router *r)
 
 	for (h = pirq_routers; h->vendor; h++) {
 		/* First look for a router match */
-		if (rt->rtr_vendor == h->vendor && h->probe(r, pirq_router_dev, rt->rtr_device))
+		if (rt->rtr_vendor == h->vendor &&
+			h->probe(r, pirq_router_dev, rt->rtr_device))
 			break;
 		/* Fall back to a device match */
-		if (pirq_router_dev->vendor == h->vendor && h->probe(r, pirq_router_dev, pirq_router_dev->device))
+		if (pirq_router_dev->vendor == h->vendor &&
+			h->probe(r, pirq_router_dev, pirq_router_dev->device))
 			break;
 	}
-	printk(KERN_INFO "PCI: Using IRQ router %s [%04x/%04x] at %s\n",
-		pirq_router.name,
-		pirq_router_dev->vendor,
-		pirq_router_dev->device,
-		pci_name(pirq_router_dev));
+	dev_info(&pirq_router_dev->dev, "%s IRQ router [%04x/%04x]\n",
+		 pirq_router.name,
+		 pirq_router_dev->vendor, pirq_router_dev->device);
 
 	/* The device remains referenced for the kernel lifetime */
 }
@@ -845,11 +851,13 @@ static void __init pirq_find_router(struct irq_router *r)
 static struct irq_info *pirq_get_info(struct pci_dev *dev)
 {
 	struct irq_routing_table *rt = pirq_table;
-	int entries = (rt->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
+	int entries = (rt->size - sizeof(struct irq_routing_table)) /
+		sizeof(struct irq_info);
 	struct irq_info *info;
 
 	for (info = rt->slots; entries--; info++)
-		if (info->bus == dev->bus->number && PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
+		if (info->bus == dev->bus->number &&
+			PCI_SLOT(info->devfn) == PCI_SLOT(dev->devfn))
 			return info;
 	return NULL;
 }
@@ -868,7 +876,7 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	/* Find IRQ pin */
 	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
 	if (!pin) {
-		DBG(KERN_DEBUG " -> no interrupt pin\n");
+		dev_dbg(&dev->dev, "no interrupt pin\n");
 		return 0;
 	}
 	pin = pin - 1;
@@ -878,19 +886,20 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	if (!pirq_table)
 		return 0;
 
-	DBG(KERN_DEBUG "IRQ for %s[%c]", pci_name(dev), 'A' + pin);
 	info = pirq_get_info(dev);
 	if (!info) {
-		DBG(" -> not found in routing table\n" KERN_DEBUG);
+		dev_dbg(&dev->dev, "PCI INT %c not found in routing table\n",
+			'A' + pin);
 		return 0;
 	}
 	pirq = info->irq[pin].link;
 	mask = info->irq[pin].bitmap;
 	if (!pirq) {
-		DBG(" -> not routed\n" KERN_DEBUG);
+		dev_dbg(&dev->dev, "PCI INT %c not routed\n", 'A' + pin);
 		return 0;
 	}
-	DBG(" -> PIRQ %02x, mask %04x, excl %04x", pirq, mask, pirq_table->exclusive_irqs);
+	dev_dbg(&dev->dev, "PCI INT %c -> PIRQ %02x, mask %04x, excl %04x",
+		'A' + pin, pirq, mask, pirq_table->exclusive_irqs);
 	mask &= pcibios_irq_mask;
 
 	/* Work around broken HP Pavilion Notebooks which assign USB to
@@ -903,7 +912,8 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	}
 
 	/* same for Acer Travelmate 360, but with CB and irq 11 -> 10 */
-	if (acer_tm360_irqrouting && dev->irq == 11 && dev->vendor == PCI_VENDOR_ID_O2) {
+	if (acer_tm360_irqrouting && dev->irq == 11 &&
+		dev->vendor == PCI_VENDOR_ID_O2) {
 		pirq = 0x68;
 		mask = 0x400;
 		dev->irq = r->get(pirq_router_dev, dev, pirq);
@@ -919,50 +929,47 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 		if (pci_probe & PCI_USE_PIRQ_MASK)
 			newirq = 0;
 		else
-			printk("\n" KERN_WARNING
-			"PCI: IRQ %i for device %s doesn't match PIRQ mask "
-			"- try pci=usepirqmask\n" KERN_DEBUG, newirq,
-			pci_name(dev));
+			dev_warn(&dev->dev, "IRQ %d doesn't match PIRQ mask "
+				 "%#x; try pci=usepirqmask\n", newirq, mask);
 	}
 	if (!newirq && assign) {
 		for (i = 0; i < 16; i++) {
 			if (!(mask & (1 << i)))
 				continue;
-			if (pirq_penalty[i] < pirq_penalty[newirq] && can_request_irq(i, IRQF_SHARED))
+			if (pirq_penalty[i] < pirq_penalty[newirq] &&
+				can_request_irq(i, IRQF_SHARED))
 				newirq = i;
 		}
 	}
-	DBG(" -> newirq=%d", newirq);
+	dev_dbg(&dev->dev, "PCI INT %c -> newirq %d", 'A' + pin, newirq);
 
 	/* Check if it is hardcoded */
 	if ((pirq & 0xf0) == 0xf0) {
 		irq = pirq & 0xf;
-		DBG(" -> hardcoded IRQ %d\n", irq);
-		msg = "Hardcoded";
+		msg = "hardcoded";
 	} else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
 	((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
-		DBG(" -> got IRQ %d\n", irq);
-		msg = "Found";
+		msg = "found";
 		eisa_set_level_irq(irq);
-	} else if (newirq && r->set && (dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
-		DBG(" -> assigning IRQ %d", newirq);
+	} else if (newirq && r->set &&
+		(dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
 		if (r->set(pirq_router_dev, dev, pirq, newirq)) {
 			eisa_set_level_irq(newirq);
-			DBG(" ... OK\n");
-			msg = "Assigned";
+			msg = "assigned";
 			irq = newirq;
 		}
 	}
 
 	if (!irq) {
-		DBG(" ... failed\n");
 		if (newirq && mask == (1 << newirq)) {
-			msg = "Guessed";
+			msg = "guessed";
 			irq = newirq;
-		} else
+		} else {
+			dev_dbg(&dev->dev, "can't route interrupt\n");
 			return 0;
+		}
 	}
-	printk(KERN_INFO "PCI: %s IRQ %d for device %s\n", msg, irq, pci_name(dev));
+	dev_info(&dev->dev, "%s PCI INT %c -> IRQ %d\n", msg, 'A' + pin, irq);
 
 	/* Update IRQ for all devices with the same pirq value */
 	while ((dev2 = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev2)) != NULL) {
@@ -974,20 +981,25 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 		if (!info)
 			continue;
 		if (info->irq[pin].link == pirq) {
-			/* We refuse to override the dev->irq information. Give a warning! */
+			/*
+			 * We refuse to override the dev->irq
+			 * information. Give a warning!
+			 */
 			if (dev2->irq && dev2->irq != irq && \
 			(!(pci_probe & PCI_USE_PIRQ_MASK) || \
 			((1 << dev2->irq) & mask))) {
 #ifndef CONFIG_PCI_MSI
-				printk(KERN_INFO "IRQ routing conflict for %s, have irq %d, want irq %d\n",
-				       pci_name(dev2), dev2->irq, irq);
+				dev_info(&dev2->dev, "IRQ routing conflict: "
+					 "have IRQ %d, want IRQ %d\n",
+					 dev2->irq, irq);
 #endif
 				continue;
 			}
 			dev2->irq = irq;
 			pirq_penalty[irq]++;
 			if (dev != dev2)
-				printk(KERN_INFO "PCI: Sharing IRQ %d with %s\n", irq, pci_name(dev2));
+				dev_info(&dev->dev, "sharing IRQ %d with %s\n",
+					 irq, pci_name(dev2));
 		}
 	}
 	return 1;
@@ -1001,15 +1013,20 @@ static void __init pcibios_fixup_irqs(void)
 	DBG(KERN_DEBUG "PCI: IRQ fixup\n");
 	while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
 		/*
-		 * If the BIOS has set an out of range IRQ number, just ignore it.
-		 * Also keep track of which IRQ's are already in use.
+		 * If the BIOS has set an out of range IRQ number, just
+		 * ignore it.  Also keep track of which IRQ's are
+		 * already in use.
 		 */
 		if (dev->irq >= 16) {
-			DBG(KERN_DEBUG "%s: ignoring bogus IRQ %d\n", pci_name(dev), dev->irq);
+			dev_dbg(&dev->dev, "ignoring bogus IRQ %d\n", dev->irq);
 			dev->irq = 0;
 		}
-		/* If the IRQ is already assigned to a PCI device, ignore its ISA use penalty */
-		if (pirq_penalty[dev->irq] >= 100 && pirq_penalty[dev->irq] < 100000)
+		/*
+		 * If the IRQ is already assigned to a PCI device,
+		 * ignore its ISA use penalty
+		 */
+		if (pirq_penalty[dev->irq] >= 100 &&
+				pirq_penalty[dev->irq] < 100000)
 			pirq_penalty[dev->irq] = 0;
 		pirq_penalty[dev->irq]++;
 	}
@@ -1025,8 +1042,13 @@ static void __init pcibios_fixup_irqs(void)
 			int irq;
 
 			if (pin) {
-				pin--;		/* interrupt pins are numbered starting from 1 */
-				irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin);
+				/*
+				 * interrupt pins are numbered starting
+				 * from 1
+				 */
+				pin--;
+				irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
+					PCI_SLOT(dev->devfn), pin);
 	/*
 	 * Busses behind bridges are typically not listed in the MP-table.
 	 * In this case we have to look up the IRQ based on the parent bus,
@@ -1040,12 +1062,12 @@ static void __init pcibios_fixup_irqs(void)
 					irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
 							PCI_SLOT(bridge->devfn), pin);
 					if (irq >= 0)
-						printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
-							pci_name(bridge), 'A' + pin, irq);
+						dev_warn(&dev->dev, "using bridge %s INT %c to get IRQ %d\n",
+							 pci_name(bridge),
+							 'A' + pin, irq);
 				}
 				if (irq >= 0) {
-					printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
-						pci_name(dev), 'A' + pin, irq);
+					dev_info(&dev->dev, "PCI->APIC IRQ transform: INT %c -> IRQ %d\n", 'A' + pin, irq);
 					dev->irq = irq;
 				}
 			}
@@ -1067,7 +1089,8 @@ static int __init fix_broken_hp_bios_irq9(const struct dmi_system_id *d)
 {
 	if (!broken_hp_bios_irq9) {
 		broken_hp_bios_irq9 = 1;
-		printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident);
+		printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
+			d->ident);
 	}
 	return 0;
 }
@@ -1080,7 +1103,8 @@ static int __init fix_acer_tm360_irqrouting(const struct dmi_system_id *d)
 {
 	if (!acer_tm360_irqrouting) {
 		acer_tm360_irqrouting = 1;
-		printk(KERN_INFO "%s detected - fixing broken IRQ routing\n", d->ident);
+		printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
+			d->ident);
 	}
 	return 0;
 }
@@ -1092,7 +1116,8 @@ static struct dmi_system_id __initdata pciirq_dmi_table[] = {
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 			DMI_MATCH(DMI_BIOS_VERSION, "GE.M1.03"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "HP Pavilion Notebook Model GE"),
+			DMI_MATCH(DMI_PRODUCT_VERSION,
+				"HP Pavilion Notebook Model GE"),
 			DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
 		},
 	},
@@ -1131,7 +1156,10 @@ int __init pcibios_irq_init(void)
 				if (!(pirq_table->exclusive_irqs & (1 << i)))
 					pirq_penalty[i] += 100;
 		}
-		/* If we're using the I/O APIC, avoid using the PCI IRQ routing table */
+		/*
+		 * If we're using the I/O APIC, avoid using the PCI IRQ
+		 * routing table
+		 */
 		if (io_apic_assign_pci_irqs)
 			pirq_table = NULL;
 	}
@@ -1175,7 +1203,7 @@ static int pirq_enable_irq(struct pci_dev *dev)
 	if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
 		char *msg = "";
 
-		pin--;		/* interrupt pins are numbered starting from 1 */
+		pin--; /* interrupt pins are numbered starting from 1 */
 
 		if (io_apic_assign_pci_irqs) {
 			int irq;
@@ -1195,29 +1223,35 @@ static int pirq_enable_irq(struct pci_dev *dev)
 				irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
 						PCI_SLOT(bridge->devfn), pin);
 				if (irq >= 0)
-					printk(KERN_WARNING "PCI: using PPB %s[%c] to get irq %d\n",
-						pci_name(bridge), 'A' + pin, irq);
+					dev_warn(&dev->dev, "using bridge %s "
+						 "INT %c to get IRQ %d\n",
+						 pci_name(bridge), 'A' + pin,
+						 irq);
 				dev = bridge;
 			}
 			dev = temp_dev;
 			if (irq >= 0) {
-				printk(KERN_INFO "PCI->APIC IRQ transform: %s[%c] -> IRQ %d\n",
-					pci_name(dev), 'A' + pin, irq);
+				dev_info(&dev->dev, "PCI->APIC IRQ transform: "
+					 "INT %c -> IRQ %d\n", 'A' + pin, irq);
 				dev->irq = irq;
 				return 0;
 			} else
-				msg = " Probably buggy MP table.";
+				msg = "; probably buggy MP table";
 		} else if (pci_probe & PCI_BIOS_IRQ_SCAN)
 			msg = "";
 		else
-			msg = " Please try using pci=biosirq.";
+			msg = "; please try using pci=biosirq";
 
-		/* With IDE legacy devices the IRQ lookup failure is not a problem.. */
-		if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE && !(dev->class & 0x5))
+		/*
+		 * With IDE legacy devices the IRQ lookup failure is not
+		 * a problem..
+		 */
+		if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE &&
+				!(dev->class & 0x5))
 			return 0;
 
-		printk(KERN_WARNING "PCI: No IRQ known for interrupt pin %c of device %s.%s\n",
-		       'A' + pin, pci_name(dev), msg);
+		dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n",
+			 'A' + pin, msg);
 	}
 	return 0;
 }
diff --git a/arch/x86/pci/legacy.c b/arch/x86/pci/legacy.c
index 132876cc6fca..ec9ce35e44d6 100644
--- a/arch/x86/pci/legacy.c
+++ b/arch/x86/pci/legacy.c
@@ -57,14 +57,17 @@ static int __init pci_legacy_init(void)
 
 int __init pci_subsys_init(void)
 {
+#ifdef CONFIG_X86_NUMAQ
+	pci_numaq_init();
+#endif
 #ifdef CONFIG_ACPI
 	pci_acpi_init();
 #endif
+#ifdef CONFIG_X86_VISWS
+	pci_visws_init();
+#endif
 	pci_legacy_init();
 	pcibios_irq_init();
-#ifdef CONFIG_X86_NUMAQ
-	pci_numa_init();
-#endif
 	pcibios_init();
 
 	return 0;
diff --git a/arch/x86/pci/numa.c b/arch/x86/pci/numa.c
deleted file mode 100644
index 8b5ca1966731..000000000000
--- a/arch/x86/pci/numa.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * numa.c - Low-level PCI access for NUMA-Q machines
- */
-
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/nodemask.h>
-#include <mach_apic.h>
-#include <asm/mpspec.h>
-#include "pci.h"
-
-#define XQUAD_PORTIO_BASE 0xfe400000
-#define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
-
-#define BUS2QUAD(global) (mp_bus_id_to_node[global])
-
-#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
-
-#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
-
-/* Where the IO area was mapped on multiquad, always 0 otherwise */
-void *xquad_portio;
-EXPORT_SYMBOL(xquad_portio);
-
-#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
-
-#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \
-	(0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3))
-
-static void write_cf8(unsigned bus, unsigned devfn, unsigned reg)
-{
-	unsigned val = PCI_CONF1_MQ_ADDRESS(bus, devfn, reg);
-	if (xquad_portio)
-		writel(val, XQUAD_PORT_ADDR(0xcf8, BUS2QUAD(bus)));
-	else
-		outl(val, 0xCF8);
-}
-
-static int pci_conf1_mq_read(unsigned int seg, unsigned int bus,
-			     unsigned int devfn, int reg, int len, u32 *value)
-{
-	unsigned long flags;
-	void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
-
-	if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
-		return -EINVAL;
-
-	spin_lock_irqsave(&pci_config_lock, flags);
-
-	write_cf8(bus, devfn, reg);
-
-	switch (len) {
-	case 1:
-		if (xquad_portio)
-			*value = readb(adr + (reg & 3));
-		else
-			*value = inb(0xCFC + (reg & 3));
-		break;
-	case 2:
-		if (xquad_portio)
-			*value = readw(adr + (reg & 2));
-		else
-			*value = inw(0xCFC + (reg & 2));
-		break;
-	case 4:
-		if (xquad_portio)
-			*value = readl(adr);
-		else
-			*value = inl(0xCFC);
-		break;
-	}
-
-	spin_unlock_irqrestore(&pci_config_lock, flags);
-
-	return 0;
-}
-
-static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
-			      unsigned int devfn, int reg, int len, u32 value)
-{
-	unsigned long flags;
-	void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
-
-	if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) 
-		return -EINVAL;
-
-	spin_lock_irqsave(&pci_config_lock, flags);
-
-	write_cf8(bus, devfn, reg);
-
-	switch (len) {
-	case 1:
-		if (xquad_portio)
-			writeb(value, adr + (reg & 3));
-		else
-			outb((u8)value, 0xCFC + (reg & 3));
-		break;
-	case 2:
-		if (xquad_portio)
-			writew(value, adr + (reg & 2));
-		else
-			outw((u16)value, 0xCFC + (reg & 2));
-		break;
-	case 4:
-		if (xquad_portio)
-			writel(value, adr + reg);
-		else
-			outl((u32)value, 0xCFC);
-		break;
-	}
-
-	spin_unlock_irqrestore(&pci_config_lock, flags);
-
-	return 0;
-}
-
-#undef PCI_CONF1_MQ_ADDRESS
-
-static struct pci_raw_ops pci_direct_conf1_mq = {
-	.read	= pci_conf1_mq_read,
-	.write	= pci_conf1_mq_write
-};
-
-
-static void __devinit pci_fixup_i450nx(struct pci_dev *d)
-{
-	/*
-	 * i450NX -- Find and scan all secondary buses on all PXB's.
-	 */
-	int pxb, reg;
-	u8 busno, suba, subb;
-	int quad = BUS2QUAD(d->bus->number);
-
-	printk("PCI: Searching for i450NX host bridges on %s\n", pci_name(d));
-	reg = 0xd0;
-	for(pxb=0; pxb<2; pxb++) {
-		pci_read_config_byte(d, reg++, &busno);
-		pci_read_config_byte(d, reg++, &suba);
-		pci_read_config_byte(d, reg++, &subb);
-		DBG("i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, suba, subb);
-		if (busno) {
-			/* Bus A */
-			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));
-		}
-		if (suba < subb) {
-			/* Bus B */
-			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1));
-		}
-	}
-	pcibios_last_bus = -1;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
-
-int __init pci_numa_init(void)
-{
-	int quad;
-
-	if (!found_numaq)
-		return 0;
-
-	raw_pci_ops = &pci_direct_conf1_mq;
-
-	if (pcibios_scanned++)
-		return 0;
-
-	pci_root_bus = pcibios_scan_root(0);
-	if (pci_root_bus)
-		pci_bus_add_devices(pci_root_bus);
-	if (num_online_nodes() > 1)
-		for_each_online_node(quad) {
-			if (quad == 0)
-				continue;
-			printk("Scanning PCI bus %d for quad %d\n", 
-				QUADLOCAL2BUS(quad,0), quad);
-			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0));
-		}
-	return 0;
-}
diff --git a/arch/x86/pci/numaq_32.c b/arch/x86/pci/numaq_32.c
new file mode 100644
index 000000000000..1177845d3186
--- /dev/null
+++ b/arch/x86/pci/numaq_32.c
@@ -0,0 +1,179 @@
+/*
+ * numaq_32.c - Low-level PCI access for NUMA-Q machines
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/nodemask.h>
+#include <mach_apic.h>
+#include <asm/mpspec.h>
+#include "pci.h"
+
+#define XQUAD_PORTIO_BASE 0xfe400000
+#define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
+
+#define BUS2QUAD(global) (mp_bus_id_to_node[global])
+
+#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
+
+#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
+
+/* Where the IO area was mapped on multiquad, always 0 otherwise */
+void *xquad_portio;
+EXPORT_SYMBOL(xquad_portio);
+
+#define XQUAD_PORT_ADDR(port, quad) (xquad_portio + (XQUAD_PORTIO_QUAD*quad) + port)
+
+#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \
+	(0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3))
+
+static void write_cf8(unsigned bus, unsigned devfn, unsigned reg)
+{
+	unsigned val = PCI_CONF1_MQ_ADDRESS(bus, devfn, reg);
+	if (xquad_portio)
+		writel(val, XQUAD_PORT_ADDR(0xcf8, BUS2QUAD(bus)));
+	else
+		outl(val, 0xCF8);
+}
+
+static int pci_conf1_mq_read(unsigned int seg, unsigned int bus,
+			     unsigned int devfn, int reg, int len, u32 *value)
+{
+	unsigned long flags;
+	void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
+
+	if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
+		return -EINVAL;
+
+	spin_lock_irqsave(&pci_config_lock, flags);
+
+	write_cf8(bus, devfn, reg);
+
+	switch (len) {
+	case 1:
+		if (xquad_portio)
+			*value = readb(adr + (reg & 3));
+		else
+			*value = inb(0xCFC + (reg & 3));
+		break;
+	case 2:
+		if (xquad_portio)
+			*value = readw(adr + (reg & 2));
+		else
+			*value = inw(0xCFC + (reg & 2));
+		break;
+	case 4:
+		if (xquad_portio)
+			*value = readl(adr);
+		else
+			*value = inl(0xCFC);
+		break;
+	}
+
+	spin_unlock_irqrestore(&pci_config_lock, flags);
+
+	return 0;
+}
+
+static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
+			      unsigned int devfn, int reg, int len, u32 value)
+{
+	unsigned long flags;
+	void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
+
+	if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255)) 
+		return -EINVAL;
+
+	spin_lock_irqsave(&pci_config_lock, flags);
+
+	write_cf8(bus, devfn, reg);
+
+	switch (len) {
+	case 1:
+		if (xquad_portio)
+			writeb(value, adr + (reg & 3));
+		else
+			outb((u8)value, 0xCFC + (reg & 3));
+		break;
+	case 2:
+		if (xquad_portio)
+			writew(value, adr + (reg & 2));
+		else
+			outw((u16)value, 0xCFC + (reg & 2));
+		break;
+	case 4:
+		if (xquad_portio)
+			writel(value, adr + reg);
+		else
+			outl((u32)value, 0xCFC);
+		break;
+	}
+
+	spin_unlock_irqrestore(&pci_config_lock, flags);
+
+	return 0;
+}
+
+#undef PCI_CONF1_MQ_ADDRESS
+
+static struct pci_raw_ops pci_direct_conf1_mq = {
+	.read	= pci_conf1_mq_read,
+	.write	= pci_conf1_mq_write
+};
+
+
+static void __devinit pci_fixup_i450nx(struct pci_dev *d)
+{
+	/*
+	 * i450NX -- Find and scan all secondary buses on all PXB's.
+	 */
+	int pxb, reg;
+	u8 busno, suba, subb;
+	int quad = BUS2QUAD(d->bus->number);
+
+	dev_info(&d->dev, "searching for i450NX host bridges\n");
+	reg = 0xd0;
+	for(pxb=0; pxb<2; pxb++) {
+		pci_read_config_byte(d, reg++, &busno);
+		pci_read_config_byte(d, reg++, &suba);
+		pci_read_config_byte(d, reg++, &subb);
+		dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n",
+			pxb, busno, suba, subb);
+		if (busno) {
+			/* Bus A */
+			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));
+		}
+		if (suba < subb) {
+			/* Bus B */
+			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1));
+		}
+	}
+	pcibios_last_bus = -1;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
+
+int __init pci_numaq_init(void)
+{
+	int quad;
+
+	if (!found_numaq)
+		return 0;
+
+	raw_pci_ops = &pci_direct_conf1_mq;
+
+	if (pcibios_scanned++)
+		return 0;
+
+	pci_root_bus = pcibios_scan_root(0);
+	if (pci_root_bus)
+		pci_bus_add_devices(pci_root_bus);
+	if (num_online_nodes() > 1)
+		for_each_online_node(quad) {
+			if (quad == 0)
+				continue;
+			printk("Scanning PCI bus %d for quad %d\n", 
+				QUADLOCAL2BUS(quad,0), quad);
+			pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0));
+		}
+	return 0;
+}
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index b2270a55b0cf..15b9cf6be729 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -28,6 +28,7 @@
 #define PCI_USE__CRS		0x10000
 #define PCI_CHECK_ENABLE_AMD_MMCONF	0x20000
 #define PCI_HAS_IO_ECS		0x40000
+#define PCI_NOASSIGN_ROMS	0x80000
 
 extern unsigned int pci_probe;
 extern unsigned long pirq_table_addr;
@@ -107,7 +108,8 @@ extern void __init dmi_check_skip_isa_align(void);
 /* some common used subsys_initcalls */
 extern int __init pci_acpi_init(void);
 extern int __init pcibios_irq_init(void);
-extern int __init pci_numa_init(void);
+extern int __init pci_visws_init(void);
+extern int __init pci_numaq_init(void);
 extern int __init pcibios_init(void);
 
 /* pci-mmconfig.c */
diff --git a/arch/x86/pci/visws.c b/arch/x86/pci/visws.c
index 1a7bed492bb1..42f4cb19faca 100644
--- a/arch/x86/pci/visws.c
+++ b/arch/x86/pci/visws.c
@@ -86,8 +86,14 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq)
 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
 }
 
-static int __init pci_visws_init(void)
+int __init pci_visws_init(void)
 {
+	if (!is_visws_box())
+		return -1;
+
+	pcibios_enable_irq = &pci_visws_enable_irq;
+	pcibios_disable_irq = &pci_visws_disable_irq;
+
 	/* The VISWS supports configuration access type 1 only */
 	pci_probe = (pci_probe | PCI_PROBE_CONF1) &
 		    ~(PCI_PROBE_BIOS | PCI_PROBE_CONF2);
@@ -105,18 +111,3 @@ static int __init pci_visws_init(void)
 	pcibios_resource_survey();
 	return 0;
 }
-
-static __init int pci_subsys_init(void)
-{
-	if (!is_visws_box())
-		return -1;
-
-	pcibios_enable_irq = &pci_visws_enable_irq;
-	pcibios_disable_irq = &pci_visws_disable_irq;
-
-	pci_visws_init();
-	pcibios_init();
-
-	return 0;
-}
-subsys_initcall(pci_subsys_init);
diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile
index b7ad9f89d21f..4d6ef0a336d6 100644
--- a/arch/x86/vdso/Makefile
+++ b/arch/x86/vdso/Makefile
@@ -62,7 +62,7 @@ $(obj)/%-syms.lds: $(obj)/%.so.dbg FORCE
 # Build multiple 32-bit vDSO images to choose from at boot time.
 #
 obj-$(VDSO32-y)			+= vdso32-syms.lds
-vdso32.so-$(CONFIG_X86_32)	+= int80
+vdso32.so-$(VDSO32-y)		+= int80
 vdso32.so-$(CONFIG_COMPAT)	+= syscall
 vdso32.so-$(VDSO32-y)		+= sysenter
 
diff --git a/arch/x86/vdso/vdso32-setup.c b/arch/x86/vdso/vdso32-setup.c
index 0bce5429a515..513f330c5832 100644
--- a/arch/x86/vdso/vdso32-setup.c
+++ b/arch/x86/vdso/vdso32-setup.c
@@ -193,17 +193,12 @@ static __init void relocate_vdso(Elf32_Ehdr *ehdr)
 	}
 }
 
-/*
- * These symbols are defined by vdso32.S to mark the bounds
- * of the ELF DSO images included therein.
- */
-extern const char vdso32_default_start, vdso32_default_end;
-extern const char vdso32_sysenter_start, vdso32_sysenter_end;
 static struct page *vdso32_pages[1];
 
 #ifdef CONFIG_X86_64
 
 #define	vdso32_sysenter()	(boot_cpu_has(X86_FEATURE_SYSENTER32))
+#define	vdso32_syscall()	(boot_cpu_has(X86_FEATURE_SYSCALL32))
 
 /* May not be __init: called during resume */
 void syscall32_cpu_init(void)
@@ -226,6 +221,7 @@ static inline void map_compat_vdso(int map)
 #else  /* CONFIG_X86_32 */
 
 #define vdso32_sysenter()	(boot_cpu_has(X86_FEATURE_SEP))
+#define vdso32_syscall()	(0)
 
 void enable_sep_cpu(void)
 {
@@ -296,12 +292,15 @@ int __init sysenter_setup(void)
 	gate_vma_init();
 #endif
 
-	if (!vdso32_sysenter()) {
-		vsyscall = &vdso32_default_start;
-		vsyscall_len = &vdso32_default_end - &vdso32_default_start;
-	} else {
+	if (vdso32_syscall()) {
+		vsyscall = &vdso32_syscall_start;
+		vsyscall_len = &vdso32_syscall_end - &vdso32_syscall_start;
+	} else if (vdso32_sysenter()){
 		vsyscall = &vdso32_sysenter_start;
 		vsyscall_len = &vdso32_sysenter_end - &vdso32_sysenter_start;
+	} else {
+		vsyscall = &vdso32_int80_start;
+		vsyscall_len = &vdso32_int80_end - &vdso32_int80_start;
 	}
 
 	memcpy(syscall_page, vsyscall, vsyscall_len);
diff --git a/arch/x86/vdso/vdso32.S b/arch/x86/vdso/vdso32.S
index 1e36f72cab86..2ce5f82c333b 100644
--- a/arch/x86/vdso/vdso32.S
+++ b/arch/x86/vdso/vdso32.S
@@ -2,14 +2,17 @@
 
 __INITDATA
 
-	.globl vdso32_default_start, vdso32_default_end
-vdso32_default_start:
-#ifdef CONFIG_X86_32
+	.globl vdso32_int80_start, vdso32_int80_end
+vdso32_int80_start:
 	.incbin "arch/x86/vdso/vdso32-int80.so"
-#else
+vdso32_int80_end:
+
+	.globl vdso32_syscall_start, vdso32_syscall_end
+vdso32_syscall_start:
+#ifdef CONFIG_COMPAT
 	.incbin "arch/x86/vdso/vdso32-syscall.so"
 #endif
-vdso32_default_end:
+vdso32_syscall_end:
 
 	.globl vdso32_sysenter_start, vdso32_sysenter_end
 vdso32_sysenter_start:
diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c
index 19a6cfaf5db9..257ba4a10abf 100644
--- a/arch/x86/vdso/vma.c
+++ b/arch/x86/vdso/vma.c
@@ -21,7 +21,8 @@ unsigned int __read_mostly vdso_enabled = 1;
 extern char vdso_start[], vdso_end[];
 extern unsigned short vdso_sync_cpuid;
 
-struct page **vdso_pages;
+static struct page **vdso_pages;
+static unsigned vdso_size;
 
 static inline void *var_ref(void *p, char *name)
 {
@@ -38,6 +39,7 @@ static int __init init_vdso_vars(void)
 	int i;
 	char *vbase;
 
+	vdso_size = npages << PAGE_SHIFT;
 	vdso_pages = kmalloc(sizeof(struct page *) * npages, GFP_KERNEL);
 	if (!vdso_pages)
 		goto oom;
@@ -101,20 +103,19 @@ int arch_setup_additional_pages(struct linux_binprm *bprm, int exstack)
 	struct mm_struct *mm = current->mm;
 	unsigned long addr;
 	int ret;
-	unsigned len = round_up(vdso_end - vdso_start, PAGE_SIZE);
 
 	if (!vdso_enabled)
 		return 0;
 
 	down_write(&mm->mmap_sem);
-	addr = vdso_addr(mm->start_stack, len);
-	addr = get_unmapped_area(NULL, addr, len, 0, 0);
+	addr = vdso_addr(mm->start_stack, vdso_size);
+	addr = get_unmapped_area(NULL, addr, vdso_size, 0, 0);
 	if (IS_ERR_VALUE(addr)) {
 		ret = addr;
 		goto up_fail;
 	}
 
-	ret = install_special_mapping(mm, addr, len,
+	ret = install_special_mapping(mm, addr, vdso_size,
 				      VM_READ|VM_EXEC|
 				      VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
 				      VM_ALWAYSDUMP,
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index c2cc99580871..3815e425f470 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -6,8 +6,8 @@ config XEN
 	bool "Xen guest support"
 	select PARAVIRT
 	select PARAVIRT_CLOCK
-	depends on X86_32
-	depends on X86_CMPXCHG && X86_TSC && X86_PAE && !(X86_VISWS || X86_VOYAGER)
+	depends on X86_64 || (X86_32 && X86_PAE && !(X86_VISWS || X86_VOYAGER))
+	depends on X86_CMPXCHG && X86_TSC
 	help
 	  This is the Linux Xen port.  Enabling this will allow the
 	  kernel to boot in a paravirtualized environment under the
@@ -15,10 +15,16 @@ config XEN
 
 config XEN_MAX_DOMAIN_MEMORY
        int "Maximum allowed size of a domain in gigabytes"
-       default 8
+       default 8 if X86_32
+       default 32 if X86_64
        depends on XEN
        help
          The pseudo-physical to machine address array is sized
          according to the maximum possible memory size of a Xen
          domain.  This array uses 1 page per gigabyte, so there's no
-         need to be too stingy here.
\ No newline at end of file
+         need to be too stingy here.
+
+config XEN_SAVE_RESTORE
+       bool
+       depends on PM
+       default y
\ No newline at end of file
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 2ba2d1649131..59c1e539aed2 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -1,4 +1,4 @@
 obj-y		:= enlighten.o setup.o multicalls.o mmu.o \
-			time.o xen-asm.o grant-table.o suspend.o
+			time.o xen-asm_$(BITS).o grant-table.o suspend.o
 
 obj-$(CONFIG_SMP)	+= smp.o
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index dcd4e51f2f16..9ff6e3cbf08f 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -33,6 +33,7 @@
 #include <xen/interface/sched.h>
 #include <xen/features.h>
 #include <xen/page.h>
+#include <xen/hvc-console.h>
 
 #include <asm/paravirt.h>
 #include <asm/page.h>
@@ -40,12 +41,12 @@
 #include <asm/xen/hypervisor.h>
 #include <asm/fixmap.h>
 #include <asm/processor.h>
+#include <asm/msr-index.h>
 #include <asm/setup.h>
 #include <asm/desc.h>
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 #include <asm/reboot.h>
-#include <asm/pgalloc.h>
 
 #include "xen-ops.h"
 #include "mmu.h"
@@ -57,6 +58,18 @@ DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu);
 DEFINE_PER_CPU(struct vcpu_info, xen_vcpu_info);
 
 /*
+ * Identity map, in addition to plain kernel map.  This needs to be
+ * large enough to allocate page table pages to allocate the rest.
+ * Each page can map 2MB.
+ */
+static pte_t level1_ident_pgt[PTRS_PER_PTE * 4] __page_aligned_bss;
+
+#ifdef CONFIG_X86_64
+/* l3 pud for userspace vsyscall mapping */
+static pud_t level3_user_vsyscall[PTRS_PER_PUD] __page_aligned_bss;
+#endif /* CONFIG_X86_64 */
+
+/*
  * Note about cr3 (pagetable base) values:
  *
  * xen_cr3 contains the current logical cr3 value; it contains the
@@ -167,10 +180,14 @@ void xen_vcpu_restore(void)
 
 static void __init xen_banner(void)
 {
+	unsigned version = HYPERVISOR_xen_version(XENVER_version, NULL);
+	struct xen_extraversion extra;
+	HYPERVISOR_xen_version(XENVER_extraversion, &extra);
+
 	printk(KERN_INFO "Booting paravirtualized kernel on %s\n",
 	       pv_info.name);
-	printk(KERN_INFO "Hypervisor signature: %s%s\n",
-	       xen_start_info->magic,
+	printk(KERN_INFO "Xen version: %d.%d%s%s\n",
+	       version >> 16, version & 0xffff, extra.extraversion,
 	       xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
 }
 
@@ -363,14 +380,6 @@ static void load_TLS_descriptor(struct thread_struct *t,
 
 static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
 {
-	xen_mc_batch();
-
-	load_TLS_descriptor(t, cpu, 0);
-	load_TLS_descriptor(t, cpu, 1);
-	load_TLS_descriptor(t, cpu, 2);
-
-	xen_mc_issue(PARAVIRT_LAZY_CPU);
-
 	/*
 	 * XXX sleazy hack: If we're being called in a lazy-cpu zone,
 	 * it means we're in a context switch, and %gs has just been
@@ -379,10 +388,39 @@ static void xen_load_tls(struct thread_struct *t, unsigned int cpu)
 	 * Either way, it has been saved, and the new value will get
 	 * loaded properly.  This will go away as soon as Xen has been
 	 * modified to not save/restore %gs for normal hypercalls.
+	 *
+	 * On x86_64, this hack is not used for %gs, because gs points
+	 * to KERNEL_GS_BASE (and uses it for PDA references), so we
+	 * must not zero %gs on x86_64
+	 *
+	 * For x86_64, we need to zero %fs, otherwise we may get an
+	 * exception between the new %fs descriptor being loaded and
+	 * %fs being effectively cleared at __switch_to().
 	 */
-	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU)
+	if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_CPU) {
+#ifdef CONFIG_X86_32
 		loadsegment(gs, 0);
+#else
+		loadsegment(fs, 0);
+#endif
+	}
+
+	xen_mc_batch();
+
+	load_TLS_descriptor(t, cpu, 0);
+	load_TLS_descriptor(t, cpu, 1);
+	load_TLS_descriptor(t, cpu, 2);
+
+	xen_mc_issue(PARAVIRT_LAZY_CPU);
+}
+
+#ifdef CONFIG_X86_64
+static void xen_load_gs_index(unsigned int idx)
+{
+	if (HYPERVISOR_set_segment_base(SEGBASE_GS_USER_SEL, idx))
+		BUG();
 }
+#endif
 
 static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
 				const void *ptr)
@@ -400,23 +438,18 @@ static void xen_write_ldt_entry(struct desc_struct *dt, int entrynum,
 	preempt_enable();
 }
 
-static int cvt_gate_to_trap(int vector, u32 low, u32 high,
+static int cvt_gate_to_trap(int vector, const gate_desc *val,
 			    struct trap_info *info)
 {
-	u8 type, dpl;
-
-	type = (high >> 8) & 0x1f;
-	dpl = (high >> 13) & 3;
-
-	if (type != 0xf && type != 0xe)
+	if (val->type != 0xf && val->type != 0xe)
 		return 0;
 
 	info->vector = vector;
-	info->address = (high & 0xffff0000) | (low & 0x0000ffff);
-	info->cs = low >> 16;
-	info->flags = dpl;
+	info->address = gate_offset(*val);
+	info->cs = gate_segment(*val);
+	info->flags = val->dpl;
 	/* interrupt gates clear IF */
-	if (type == 0xe)
+	if (val->type == 0xe)
 		info->flags |= 4;
 
 	return 1;
@@ -443,11 +476,10 @@ static void xen_write_idt_entry(gate_desc *dt, int entrynum, const gate_desc *g)
 
 	if (p >= start && (p + 8) <= end) {
 		struct trap_info info[2];
-		u32 *desc = (u32 *)g;
 
 		info[1].address = 0;
 
-		if (cvt_gate_to_trap(entrynum, desc[0], desc[1], &info[0]))
+		if (cvt_gate_to_trap(entrynum, g, &info[0]))
 			if (HYPERVISOR_set_trap_table(info))
 				BUG();
 	}
@@ -460,13 +492,13 @@ static void xen_convert_trap_info(const struct desc_ptr *desc,
 {
 	unsigned in, out, count;
 
-	count = (desc->size+1) / 8;
+	count = (desc->size+1) / sizeof(gate_desc);
 	BUG_ON(count > 256);
 
 	for (in = out = 0; in < count; in++) {
-		const u32 *entry = (u32 *)(desc->address + in * 8);
+		gate_desc *entry = (gate_desc*)(desc->address) + in;
 
-		if (cvt_gate_to_trap(in, entry[0], entry[1], &traps[out]))
+		if (cvt_gate_to_trap(in, entry, &traps[out]))
 			out++;
 	}
 	traps[out].address = 0;
@@ -695,33 +727,89 @@ static void set_current_cr3(void *v)
 	x86_write_percpu(xen_current_cr3, (unsigned long)v);
 }
 
-static void xen_write_cr3(unsigned long cr3)
+static void __xen_write_cr3(bool kernel, unsigned long cr3)
 {
 	struct mmuext_op *op;
 	struct multicall_space mcs;
-	unsigned long mfn = pfn_to_mfn(PFN_DOWN(cr3));
+	unsigned long mfn;
 
-	BUG_ON(preemptible());
+	if (cr3)
+		mfn = pfn_to_mfn(PFN_DOWN(cr3));
+	else
+		mfn = 0;
 
-	mcs = xen_mc_entry(sizeof(*op));  /* disables interrupts */
+	WARN_ON(mfn == 0 && kernel);
 
-	/* Update while interrupts are disabled, so its atomic with
-	   respect to ipis */
-	x86_write_percpu(xen_cr3, cr3);
+	mcs = __xen_mc_entry(sizeof(*op));
 
 	op = mcs.args;
-	op->cmd = MMUEXT_NEW_BASEPTR;
+	op->cmd = kernel ? MMUEXT_NEW_BASEPTR : MMUEXT_NEW_USER_BASEPTR;
 	op->arg1.mfn = mfn;
 
 	MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF);
 
-	/* Update xen_update_cr3 once the batch has actually
-	   been submitted. */
-	xen_mc_callback(set_current_cr3, (void *)cr3);
+	if (kernel) {
+		x86_write_percpu(xen_cr3, cr3);
+
+		/* Update xen_current_cr3 once the batch has actually
+		   been submitted. */
+		xen_mc_callback(set_current_cr3, (void *)cr3);
+	}
+}
+
+static void xen_write_cr3(unsigned long cr3)
+{
+	BUG_ON(preemptible());
+
+	xen_mc_batch();  /* disables interrupts */
+
+	/* Update while interrupts are disabled, so its atomic with
+	   respect to ipis */
+	x86_write_percpu(xen_cr3, cr3);
+
+	__xen_write_cr3(true, cr3);
+
+#ifdef CONFIG_X86_64
+	{
+		pgd_t *user_pgd = xen_get_user_pgd(__va(cr3));
+		if (user_pgd)
+			__xen_write_cr3(false, __pa(user_pgd));
+		else
+			__xen_write_cr3(false, 0);
+	}
+#endif
 
 	xen_mc_issue(PARAVIRT_LAZY_CPU);  /* interrupts restored */
 }
 
+static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
+{
+	int ret;
+
+	ret = 0;
+
+	switch(msr) {
+#ifdef CONFIG_X86_64
+		unsigned which;
+		u64 base;
+
+	case MSR_FS_BASE:		which = SEGBASE_FS; goto set;
+	case MSR_KERNEL_GS_BASE:	which = SEGBASE_GS_USER; goto set;
+	case MSR_GS_BASE:		which = SEGBASE_GS_KERNEL; goto set;
+
+	set:
+		base = ((u64)high << 32) | low;
+		if (HYPERVISOR_set_segment_base(which, base) != 0)
+			ret = -EFAULT;
+		break;
+#endif
+	default:
+		ret = native_write_msr_safe(msr, low, high);
+	}
+
+	return ret;
+}
+
 /* Early in boot, while setting up the initial pagetable, assume
    everything is pinned. */
 static __init void xen_alloc_pte_init(struct mm_struct *mm, u32 pfn)
@@ -778,6 +866,48 @@ static void xen_alloc_pmd(struct mm_struct *mm, u32 pfn)
 	xen_alloc_ptpage(mm, pfn, PT_PMD);
 }
 
+static int xen_pgd_alloc(struct mm_struct *mm)
+{
+	pgd_t *pgd = mm->pgd;
+	int ret = 0;
+
+	BUG_ON(PagePinned(virt_to_page(pgd)));
+
+#ifdef CONFIG_X86_64
+	{
+		struct page *page = virt_to_page(pgd);
+		pgd_t *user_pgd;
+
+		BUG_ON(page->private != 0);
+
+		ret = -ENOMEM;
+
+		user_pgd = (pgd_t *)__get_free_page(GFP_KERNEL | __GFP_ZERO);
+		page->private = (unsigned long)user_pgd;
+
+		if (user_pgd != NULL) {
+			user_pgd[pgd_index(VSYSCALL_START)] =
+				__pgd(__pa(level3_user_vsyscall) | _PAGE_TABLE);
+			ret = 0;
+		}
+
+		BUG_ON(PagePinned(virt_to_page(xen_get_user_pgd(pgd))));
+	}
+#endif
+
+	return ret;
+}
+
+static void xen_pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+#ifdef CONFIG_X86_64
+	pgd_t *user_pgd = xen_get_user_pgd(pgd);
+
+	if (user_pgd)
+		free_page((unsigned long)user_pgd);
+#endif
+}
+
 /* This should never happen until we're OK to use struct page */
 static void xen_release_ptpage(u32 pfn, unsigned level)
 {
@@ -803,6 +933,18 @@ static void xen_release_pmd(u32 pfn)
 	xen_release_ptpage(pfn, PT_PMD);
 }
 
+#if PAGETABLE_LEVELS == 4
+static void xen_alloc_pud(struct mm_struct *mm, u32 pfn)
+{
+	xen_alloc_ptpage(mm, pfn, PT_PUD);
+}
+
+static void xen_release_pud(u32 pfn)
+{
+	xen_release_ptpage(pfn, PT_PUD);
+}
+#endif
+
 #ifdef CONFIG_HIGHPTE
 static void *xen_kmap_atomic_pte(struct page *page, enum km_type type)
 {
@@ -841,68 +983,16 @@ static __init void xen_set_pte_init(pte_t *ptep, pte_t pte)
 
 static __init void xen_pagetable_setup_start(pgd_t *base)
 {
-	pgd_t *xen_pgd = (pgd_t *)xen_start_info->pt_base;
-	int i;
-
-	/* special set_pte for pagetable initialization */
-	pv_mmu_ops.set_pte = xen_set_pte_init;
-
-	init_mm.pgd = base;
-	/*
-	 * copy top-level of Xen-supplied pagetable into place.  This
-	 * is a stand-in while we copy the pmd pages.
-	 */
-	memcpy(base, xen_pgd, PTRS_PER_PGD * sizeof(pgd_t));
-
-	/*
-	 * For PAE, need to allocate new pmds, rather than
-	 * share Xen's, since Xen doesn't like pmd's being
-	 * shared between address spaces.
-	 */
-	for (i = 0; i < PTRS_PER_PGD; i++) {
-		if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) {
-			pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE);
-
-			memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]),
-			       PAGE_SIZE);
-
-			make_lowmem_page_readonly(pmd);
-
-			set_pgd(&base[i], __pgd(1 + __pa(pmd)));
-		} else
-			pgd_clear(&base[i]);
-	}
-
-	/* make sure zero_page is mapped RO so we can use it in pagetables */
-	make_lowmem_page_readonly(empty_zero_page);
-	make_lowmem_page_readonly(base);
-	/*
-	 * Switch to new pagetable.  This is done before
-	 * pagetable_init has done anything so that the new pages
-	 * added to the table can be prepared properly for Xen.
-	 */
-	xen_write_cr3(__pa(base));
-
-	/* Unpin initial Xen pagetable */
-	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE,
-			  PFN_DOWN(__pa(xen_start_info->pt_base)));
 }
 
 void xen_setup_shared_info(void)
 {
 	if (!xen_feature(XENFEAT_auto_translated_physmap)) {
-		unsigned long addr = fix_to_virt(FIX_PARAVIRT_BOOTMAP);
-
-		/*
-		 * Create a mapping for the shared info page.
-		 * Should be set_fixmap(), but shared_info is a machine
-		 * address with no corresponding pseudo-phys address.
-		 */
-		set_pte_mfn(addr,
-			    PFN_DOWN(xen_start_info->shared_info),
-			    PAGE_KERNEL);
-
-		HYPERVISOR_shared_info = (struct shared_info *)addr;
+		set_fixmap(FIX_PARAVIRT_BOOTMAP,
+			   xen_start_info->shared_info);
+
+		HYPERVISOR_shared_info =
+			(struct shared_info *)fix_to_virt(FIX_PARAVIRT_BOOTMAP);
 	} else
 		HYPERVISOR_shared_info =
 			(struct shared_info *)__va(xen_start_info->shared_info);
@@ -917,26 +1007,32 @@ void xen_setup_shared_info(void)
 
 static __init void xen_pagetable_setup_done(pgd_t *base)
 {
-	/* This will work as long as patching hasn't happened yet
-	   (which it hasn't) */
-	pv_mmu_ops.alloc_pte = xen_alloc_pte;
-	pv_mmu_ops.alloc_pmd = xen_alloc_pmd;
-	pv_mmu_ops.release_pte = xen_release_pte;
-	pv_mmu_ops.release_pmd = xen_release_pmd;
-	pv_mmu_ops.set_pte = xen_set_pte;
-
 	xen_setup_shared_info();
-
-	/* Actually pin the pagetable down, but we can't set PG_pinned
-	   yet because the page structures don't exist yet. */
-	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(base)));
 }
 
 static __init void xen_post_allocator_init(void)
 {
+	pv_mmu_ops.set_pte = xen_set_pte;
 	pv_mmu_ops.set_pmd = xen_set_pmd;
 	pv_mmu_ops.set_pud = xen_set_pud;
+#if PAGETABLE_LEVELS == 4
+	pv_mmu_ops.set_pgd = xen_set_pgd;
+#endif
+
+	/* This will work as long as patching hasn't happened yet
+	   (which it hasn't) */
+	pv_mmu_ops.alloc_pte = xen_alloc_pte;
+	pv_mmu_ops.alloc_pmd = xen_alloc_pmd;
+	pv_mmu_ops.release_pte = xen_release_pte;
+	pv_mmu_ops.release_pmd = xen_release_pmd;
+#if PAGETABLE_LEVELS == 4
+	pv_mmu_ops.alloc_pud = xen_alloc_pud;
+	pv_mmu_ops.release_pud = xen_release_pud;
+#endif
 
+#ifdef CONFIG_X86_64
+	SetPagePinned(virt_to_page(level3_user_vsyscall));
+#endif
 	xen_mark_init_mm_pinned();
 }
 
@@ -950,6 +1046,7 @@ void xen_setup_vcpu_info_placement(void)
 
 	/* xen_vcpu_setup managed to place the vcpu_info within the
 	   percpu area for all cpus, so make use of it */
+#ifdef CONFIG_X86_32
 	if (have_vcpu_info_placement) {
 		printk(KERN_INFO "Xen: using vcpu_info placement\n");
 
@@ -959,6 +1056,7 @@ void xen_setup_vcpu_info_placement(void)
 		pv_irq_ops.irq_enable = xen_irq_enable_direct;
 		pv_mmu_ops.read_cr2 = xen_read_cr2_direct;
 	}
+#endif
 }
 
 static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf,
@@ -979,10 +1077,12 @@ static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf,
 	goto patch_site
 
 	switch (type) {
+#ifdef CONFIG_X86_32
 		SITE(pv_irq_ops, irq_enable);
 		SITE(pv_irq_ops, irq_disable);
 		SITE(pv_irq_ops, save_fl);
 		SITE(pv_irq_ops, restore_fl);
+#endif /* CONFIG_X86_32 */
 #undef SITE
 
 	patch_site:
@@ -1025,8 +1125,15 @@ static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot)
 #ifdef CONFIG_X86_F00F_BUG
 	case FIX_F00F_IDT:
 #endif
+#ifdef CONFIG_X86_32
 	case FIX_WP_TEST:
 	case FIX_VDSO:
+# ifdef CONFIG_HIGHMEM
+	case FIX_KMAP_BEGIN ... FIX_KMAP_END:
+# endif
+#else
+	case VSYSCALL_LAST_PAGE ... VSYSCALL_FIRST_PAGE:
+#endif
 #ifdef CONFIG_X86_LOCAL_APIC
 	case FIX_APIC_BASE:	/* maps dummy local APIC */
 #endif
@@ -1039,6 +1146,15 @@ static void xen_set_fixmap(unsigned idx, unsigned long phys, pgprot_t prot)
 	}
 
 	__native_set_fixmap(idx, pte);
+
+#ifdef CONFIG_X86_64
+	/* Replicate changes to map the vsyscall page into the user
+	   pagetable vsyscall mapping. */
+	if (idx >= VSYSCALL_LAST_PAGE && idx <= VSYSCALL_FIRST_PAGE) {
+		unsigned long vaddr = __fix_to_virt(idx);
+		set_pte_vaddr_pud(level3_user_vsyscall, vaddr, pte);
+	}
+#endif
 }
 
 static const struct pv_info xen_info __initdata = {
@@ -1084,18 +1200,25 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
 	.wbinvd = native_wbinvd,
 
 	.read_msr = native_read_msr_safe,
-	.write_msr = native_write_msr_safe,
+	.write_msr = xen_write_msr_safe,
 	.read_tsc = native_read_tsc,
 	.read_pmc = native_read_pmc,
 
 	.iret = xen_iret,
 	.irq_enable_sysexit = xen_sysexit,
+#ifdef CONFIG_X86_64
+	.usergs_sysret32 = xen_sysret32,
+	.usergs_sysret64 = xen_sysret64,
+#endif
 
 	.load_tr_desc = paravirt_nop,
 	.set_ldt = xen_set_ldt,
 	.load_gdt = xen_load_gdt,
 	.load_idt = xen_load_idt,
 	.load_tls = xen_load_tls,
+#ifdef CONFIG_X86_64
+	.load_gs_index = xen_load_gs_index,
+#endif
 
 	.store_gdt = native_store_gdt,
 	.store_idt = native_store_idt,
@@ -1109,14 +1232,34 @@ static const struct pv_cpu_ops xen_cpu_ops __initdata = {
 	.set_iopl_mask = xen_set_iopl_mask,
 	.io_delay = xen_io_delay,
 
+	/* Xen takes care of %gs when switching to usermode for us */
+	.swapgs = paravirt_nop,
+
 	.lazy_mode = {
 		.enter = paravirt_enter_lazy_cpu,
 		.leave = xen_leave_lazy,
 	},
 };
 
+static void __init __xen_init_IRQ(void)
+{
+#ifdef CONFIG_X86_64
+	int i;
+
+	/* Create identity vector->irq map */
+	for(i = 0; i < NR_VECTORS; i++) {
+		int cpu;
+
+		for_each_possible_cpu(cpu)
+			per_cpu(vector_irq, cpu)[i] = i;
+	}
+#endif	/* CONFIG_X86_64 */
+
+	xen_init_IRQ();
+}
+
 static const struct pv_irq_ops xen_irq_ops __initdata = {
-	.init_IRQ = xen_init_IRQ,
+	.init_IRQ = __xen_init_IRQ,
 	.save_fl = xen_save_fl,
 	.restore_fl = xen_restore_fl,
 	.irq_disable = xen_irq_disable,
@@ -1124,14 +1267,13 @@ static const struct pv_irq_ops xen_irq_ops __initdata = {
 	.safe_halt = xen_safe_halt,
 	.halt = xen_halt,
 #ifdef CONFIG_X86_64
-	.adjust_exception_frame = paravirt_nop,
+	.adjust_exception_frame = xen_adjust_exception_frame,
 #endif
 };
 
 static const struct pv_apic_ops xen_apic_ops __initdata = {
 #ifdef CONFIG_X86_LOCAL_APIC
 	.apic_write = xen_apic_write,
-	.apic_write_atomic = xen_apic_write,
 	.apic_read = xen_apic_read,
 	.setup_boot_clock = paravirt_nop,
 	.setup_secondary_clock = paravirt_nop,
@@ -1157,8 +1299,8 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.pte_update = paravirt_nop,
 	.pte_update_defer = paravirt_nop,
 
-	.pgd_alloc = __paravirt_pgd_alloc,
-	.pgd_free = paravirt_nop,
+	.pgd_alloc = xen_pgd_alloc,
+	.pgd_free = xen_pgd_free,
 
 	.alloc_pte = xen_alloc_pte_init,
 	.release_pte = xen_release_pte_init,
@@ -1170,7 +1312,11 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.kmap_atomic_pte = xen_kmap_atomic_pte,
 #endif
 
-	.set_pte = NULL,	/* see xen_pagetable_setup_* */
+#ifdef CONFIG_X86_64
+	.set_pte = xen_set_pte,
+#else
+	.set_pte = xen_set_pte_init,
+#endif
 	.set_pte_at = xen_set_pte_at,
 	.set_pmd = xen_set_pmd_hyper,
 
@@ -1184,15 +1330,26 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.make_pte = xen_make_pte,
 	.make_pgd = xen_make_pgd,
 
+#ifdef CONFIG_X86_PAE
 	.set_pte_atomic = xen_set_pte_atomic,
 	.set_pte_present = xen_set_pte_at,
-	.set_pud = xen_set_pud_hyper,
 	.pte_clear = xen_pte_clear,
 	.pmd_clear = xen_pmd_clear,
+#endif	/* CONFIG_X86_PAE */
+	.set_pud = xen_set_pud_hyper,
 
 	.make_pmd = xen_make_pmd,
 	.pmd_val = xen_pmd_val,
 
+#if PAGETABLE_LEVELS == 4
+	.pud_val = xen_pud_val,
+	.make_pud = xen_make_pud,
+	.set_pgd = xen_set_pgd_hyper,
+
+	.alloc_pud = xen_alloc_pte_init,
+	.release_pud = xen_release_pte_init,
+#endif	/* PAGETABLE_LEVELS == 4 */
+
 	.activate_mm = xen_activate_mm,
 	.dup_mmap = xen_dup_mmap,
 	.exit_mmap = xen_exit_mmap,
@@ -1205,19 +1362,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = {
 	.set_fixmap = xen_set_fixmap,
 };
 
-#ifdef CONFIG_SMP
-static const struct smp_ops xen_smp_ops __initdata = {
-	.smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu,
-	.smp_prepare_cpus = xen_smp_prepare_cpus,
-	.cpu_up = xen_cpu_up,
-	.smp_cpus_done = xen_smp_cpus_done,
-
-	.smp_send_stop = xen_smp_send_stop,
-	.smp_send_reschedule = xen_smp_send_reschedule,
-	.smp_call_function_mask = xen_smp_call_function_mask,
-};
-#endif	/* CONFIG_SMP */
-
 static void xen_reboot(int reason)
 {
 	struct sched_shutdown r = { .reason = reason };
@@ -1262,6 +1406,7 @@ static const struct machine_ops __initdata xen_machine_ops = {
 
 static void __init xen_reserve_top(void)
 {
+#ifdef CONFIG_X86_32
 	unsigned long top = HYPERVISOR_VIRT_START;
 	struct xen_platform_parameters pp;
 
@@ -1269,7 +1414,247 @@ static void __init xen_reserve_top(void)
 		top = pp.virt_start;
 
 	reserve_top_address(-top + 2 * PAGE_SIZE);
+#endif	/* CONFIG_X86_32 */
+}
+
+/*
+ * Like __va(), but returns address in the kernel mapping (which is
+ * all we have until the physical memory mapping has been set up.
+ */
+static void *__ka(phys_addr_t paddr)
+{
+#ifdef CONFIG_X86_64
+	return (void *)(paddr + __START_KERNEL_map);
+#else
+	return __va(paddr);
+#endif
+}
+
+/* Convert a machine address to physical address */
+static unsigned long m2p(phys_addr_t maddr)
+{
+	phys_addr_t paddr;
+
+	maddr &= PTE_PFN_MASK;
+	paddr = mfn_to_pfn(maddr >> PAGE_SHIFT) << PAGE_SHIFT;
+
+	return paddr;
+}
+
+/* Convert a machine address to kernel virtual */
+static void *m2v(phys_addr_t maddr)
+{
+	return __ka(m2p(maddr));
+}
+
+#ifdef CONFIG_X86_64
+static void walk(pgd_t *pgd, unsigned long addr)
+{
+	unsigned l4idx = pgd_index(addr);
+	unsigned l3idx = pud_index(addr);
+	unsigned l2idx = pmd_index(addr);
+	unsigned l1idx = pte_index(addr);
+	pgd_t l4;
+	pud_t l3;
+	pmd_t l2;
+	pte_t l1;
+
+	xen_raw_printk("walk %p, %lx -> %d %d %d %d\n",
+		       pgd, addr, l4idx, l3idx, l2idx, l1idx);
+
+	l4 = pgd[l4idx];
+	xen_raw_printk("  l4: %016lx\n", l4.pgd);
+	xen_raw_printk("      %016lx\n", pgd_val(l4));
+
+	l3 = ((pud_t *)(m2v(l4.pgd)))[l3idx];
+	xen_raw_printk("  l3: %016lx\n", l3.pud);
+	xen_raw_printk("      %016lx\n", pud_val(l3));
+
+	l2 = ((pmd_t *)(m2v(l3.pud)))[l2idx];
+	xen_raw_printk("  l2: %016lx\n", l2.pmd);
+	xen_raw_printk("      %016lx\n", pmd_val(l2));
+
+	l1 = ((pte_t *)(m2v(l2.pmd)))[l1idx];
+	xen_raw_printk("  l1: %016lx\n", l1.pte);
+	xen_raw_printk("      %016lx\n", pte_val(l1));
+}
+#endif
+
+static void set_page_prot(void *addr, pgprot_t prot)
+{
+	unsigned long pfn = __pa(addr) >> PAGE_SHIFT;
+	pte_t pte = pfn_pte(pfn, prot);
+
+	xen_raw_printk("addr=%p pfn=%lx mfn=%lx prot=%016llx pte=%016llx\n",
+		       addr, pfn, get_phys_to_machine(pfn),
+		       pgprot_val(prot), pte.pte);
+
+	if (HYPERVISOR_update_va_mapping((unsigned long)addr, pte, 0))
+		BUG();
+}
+
+static __init void xen_map_identity_early(pmd_t *pmd, unsigned long max_pfn)
+{
+	unsigned pmdidx, pteidx;
+	unsigned ident_pte;
+	unsigned long pfn;
+
+	ident_pte = 0;
+	pfn = 0;
+	for(pmdidx = 0; pmdidx < PTRS_PER_PMD && pfn < max_pfn; pmdidx++) {
+		pte_t *pte_page;
+
+		/* Reuse or allocate a page of ptes */
+		if (pmd_present(pmd[pmdidx]))
+			pte_page = m2v(pmd[pmdidx].pmd);
+		else {
+			/* Check for free pte pages */
+			if (ident_pte == ARRAY_SIZE(level1_ident_pgt))
+				break;
+
+			pte_page = &level1_ident_pgt[ident_pte];
+			ident_pte += PTRS_PER_PTE;
+
+			pmd[pmdidx] = __pmd(__pa(pte_page) | _PAGE_TABLE);
+		}
+
+		/* Install mappings */
+		for(pteidx = 0; pteidx < PTRS_PER_PTE; pteidx++, pfn++) {
+			pte_t pte;
+
+			if (pfn > max_pfn_mapped)
+				max_pfn_mapped = pfn;
+
+			if (!pte_none(pte_page[pteidx]))
+				continue;
+
+			pte = pfn_pte(pfn, PAGE_KERNEL_EXEC);
+			pte_page[pteidx] = pte;
+		}
+	}
+
+	for(pteidx = 0; pteidx < ident_pte; pteidx += PTRS_PER_PTE)
+		set_page_prot(&level1_ident_pgt[pteidx], PAGE_KERNEL_RO);
+
+	set_page_prot(pmd, PAGE_KERNEL_RO);
+}
+
+#ifdef CONFIG_X86_64
+static void convert_pfn_mfn(void *v)
+{
+	pte_t *pte = v;
+	int i;
+
+	/* All levels are converted the same way, so just treat them
+	   as ptes. */
+	for(i = 0; i < PTRS_PER_PTE; i++)
+		pte[i] = xen_make_pte(pte[i].pte);
+}
+
+/*
+ * Set up the inital kernel pagetable.
+ *
+ * We can construct this by grafting the Xen provided pagetable into
+ * head_64.S's preconstructed pagetables.  We copy the Xen L2's into
+ * level2_ident_pgt, level2_kernel_pgt and level2_fixmap_pgt.  This
+ * means that only the kernel has a physical mapping to start with -
+ * but that's enough to get __va working.  We need to fill in the rest
+ * of the physical mapping once some sort of allocator has been set
+ * up.
+ */
+static __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
+{
+	pud_t *l3;
+	pmd_t *l2;
+
+	/* Zap identity mapping */
+	init_level4_pgt[0] = __pgd(0);
+
+	/* Pre-constructed entries are in pfn, so convert to mfn */
+	convert_pfn_mfn(init_level4_pgt);
+	convert_pfn_mfn(level3_ident_pgt);
+	convert_pfn_mfn(level3_kernel_pgt);
+
+	l3 = m2v(pgd[pgd_index(__START_KERNEL_map)].pgd);
+	l2 = m2v(l3[pud_index(__START_KERNEL_map)].pud);
+
+	memcpy(level2_ident_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+	memcpy(level2_kernel_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+
+	l3 = m2v(pgd[pgd_index(__START_KERNEL_map + PMD_SIZE)].pgd);
+	l2 = m2v(l3[pud_index(__START_KERNEL_map + PMD_SIZE)].pud);
+	memcpy(level2_fixmap_pgt, l2, sizeof(pmd_t) * PTRS_PER_PMD);
+
+	/* Set up identity map */
+	xen_map_identity_early(level2_ident_pgt, max_pfn);
+
+	/* Make pagetable pieces RO */
+	set_page_prot(init_level4_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level3_ident_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level3_kernel_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level3_user_vsyscall, PAGE_KERNEL_RO);
+	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
+	set_page_prot(level2_fixmap_pgt, PAGE_KERNEL_RO);
+
+	/* Pin down new L4 */
+	pin_pagetable_pfn(MMUEXT_PIN_L4_TABLE,
+			  PFN_DOWN(__pa_symbol(init_level4_pgt)));
+
+	/* Unpin Xen-provided one */
+	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
+
+	/* Switch over */
+	pgd = init_level4_pgt;
+
+	/*
+	 * At this stage there can be no user pgd, and no page
+	 * structure to attach it to, so make sure we just set kernel
+	 * pgd.
+	 */
+	xen_mc_batch();
+	__xen_write_cr3(true, __pa(pgd));
+	xen_mc_issue(PARAVIRT_LAZY_CPU);
+
+	reserve_early(__pa(xen_start_info->pt_base),
+		      __pa(xen_start_info->pt_base +
+			   xen_start_info->nr_pt_frames * PAGE_SIZE),
+		      "XEN PAGETABLES");
+
+	return pgd;
+}
+#else	/* !CONFIG_X86_64 */
+static pmd_t level2_kernel_pgt[PTRS_PER_PMD] __page_aligned_bss;
+
+static __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd, unsigned long max_pfn)
+{
+	pmd_t *kernel_pmd;
+
+	init_pg_tables_start = __pa(pgd);
+	init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE;
+	max_pfn_mapped = PFN_DOWN(init_pg_tables_end + 512*1024);
+
+	kernel_pmd = m2v(pgd[KERNEL_PGD_BOUNDARY].pgd);
+	memcpy(level2_kernel_pgt, kernel_pmd, sizeof(pmd_t) * PTRS_PER_PMD);
+
+	xen_map_identity_early(level2_kernel_pgt, max_pfn);
+
+	memcpy(swapper_pg_dir, pgd, sizeof(pgd_t) * PTRS_PER_PGD);
+	set_pgd(&swapper_pg_dir[KERNEL_PGD_BOUNDARY],
+			__pgd(__pa(level2_kernel_pgt) | _PAGE_PRESENT));
+
+	set_page_prot(level2_kernel_pgt, PAGE_KERNEL_RO);
+	set_page_prot(swapper_pg_dir, PAGE_KERNEL_RO);
+	set_page_prot(empty_zero_page, PAGE_KERNEL_RO);
+
+	pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
+
+	xen_write_cr3(__pa(swapper_pg_dir));
+
+	pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
+
+	return swapper_pg_dir;
 }
+#endif	/* CONFIG_X86_64 */
 
 /* First C function to be called on Xen boot */
 asmlinkage void __init xen_start_kernel(void)
@@ -1299,53 +1684,56 @@ asmlinkage void __init xen_start_kernel(void)
 
 	machine_ops = xen_machine_ops;
 
-#ifdef CONFIG_SMP
-	smp_ops = xen_smp_ops;
+#ifdef CONFIG_X86_64
+	/* Disable until direct per-cpu data access. */
+	have_vcpu_info_placement = 0;
+	x86_64_init_pda();
 #endif
 
+	xen_smp_init();
+
 	/* Get mfn list */
 	if (!xen_feature(XENFEAT_auto_translated_physmap))
 		xen_build_dynamic_phys_to_machine();
 
 	pgd = (pgd_t *)xen_start_info->pt_base;
 
-	init_pg_tables_start = __pa(pgd);
-	init_pg_tables_end = __pa(pgd) + xen_start_info->nr_pt_frames*PAGE_SIZE;
-	max_pfn_mapped = (init_pg_tables_end + 512*1024) >> PAGE_SHIFT;
-
-	init_mm.pgd = pgd; /* use the Xen pagetables to start */
-
-	/* keep using Xen gdt for now; no urgent need to change it */
-
-	x86_write_percpu(xen_cr3, __pa(pgd));
-	x86_write_percpu(xen_current_cr3, __pa(pgd));
+	/* Prevent unwanted bits from being set in PTEs. */
+	__supported_pte_mask &= ~_PAGE_GLOBAL;
+	if (!is_initial_xendomain())
+		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
 
 	/* Don't do the full vcpu_info placement stuff until we have a
 	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
 
+	xen_raw_console_write("mapping kernel into physical memory\n");
+	pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
+
+	init_mm.pgd = pgd;
+
+	/* keep using Xen gdt for now; no urgent need to change it */
+
 	pv_info.kernel_rpl = 1;
 	if (xen_feature(XENFEAT_supervisor_mode_kernel))
 		pv_info.kernel_rpl = 0;
 
-	/* Prevent unwanted bits from being set in PTEs. */
-	__supported_pte_mask &= ~_PAGE_GLOBAL;
-	if (!is_initial_xendomain())
-		__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
-
 	/* set the limit of our address space */
 	xen_reserve_top();
 
+#ifdef CONFIG_X86_32
 	/* set up basic CPUID stuff */
 	cpu_detect(&new_cpu_data);
 	new_cpu_data.hard_math = 1;
 	new_cpu_data.x86_capability[0] = cpuid_edx(1);
+#endif
 
 	/* Poke various useful things into boot_params */
 	boot_params.hdr.type_of_loader = (9 << 4) | 0;
 	boot_params.hdr.ramdisk_image = xen_start_info->mod_start
 		? __pa(xen_start_info->mod_start) : 0;
 	boot_params.hdr.ramdisk_size = xen_start_info->mod_len;
+	boot_params.hdr.cmd_line_ptr = __pa(xen_start_info->cmd_line);
 
 	if (!is_initial_xendomain()) {
 		add_preferred_console("xenboot", 0, NULL);
@@ -1353,6 +1741,21 @@ asmlinkage void __init xen_start_kernel(void)
 		add_preferred_console("hvc", 0, NULL);
 	}
 
+	xen_raw_console_write("about to get started...\n");
+
+#if 0
+	xen_raw_printk("&boot_params=%p __pa(&boot_params)=%lx __va(__pa(&boot_params))=%lx\n",
+		       &boot_params, __pa_symbol(&boot_params),
+		       __va(__pa_symbol(&boot_params)));
+
+	walk(pgd, &boot_params);
+	walk(pgd, __va(__pa(&boot_params)));
+#endif
+
 	/* Start the world */
+#ifdef CONFIG_X86_32
 	i386_start_kernel();
+#else
+	x86_64_start_reservations((char *)__pa_symbol(&boot_params));
+#endif
 }
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 42b3b9ed641d..aa37469da696 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -44,8 +44,10 @@
 
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
+#include <asm/fixmap.h>
 #include <asm/mmu_context.h>
 #include <asm/paravirt.h>
+#include <asm/linkage.h>
 
 #include <asm/xen/hypercall.h>
 #include <asm/xen/hypervisor.h>
@@ -56,26 +58,29 @@
 #include "multicalls.h"
 #include "mmu.h"
 
+/*
+ * Just beyond the highest usermode address.  STACK_TOP_MAX has a
+ * redzone above it, so round it up to a PGD boundary.
+ */
+#define USER_LIMIT	((STACK_TOP_MAX + PGDIR_SIZE - 1) & PGDIR_MASK)
+
+
 #define P2M_ENTRIES_PER_PAGE	(PAGE_SIZE / sizeof(unsigned long))
 #define TOP_ENTRIES		(MAX_DOMAIN_PAGES / P2M_ENTRIES_PER_PAGE)
 
 /* Placeholder for holes in the address space */
-static unsigned long p2m_missing[P2M_ENTRIES_PER_PAGE]
-	__attribute__((section(".data.page_aligned"))) =
+static unsigned long p2m_missing[P2M_ENTRIES_PER_PAGE] __page_aligned_data =
 		{ [ 0 ... P2M_ENTRIES_PER_PAGE-1 ] = ~0UL };
 
  /* Array of pointers to pages containing p2m entries */
-static unsigned long *p2m_top[TOP_ENTRIES]
-	__attribute__((section(".data.page_aligned"))) =
+static unsigned long *p2m_top[TOP_ENTRIES] __page_aligned_data =
 		{ [ 0 ... TOP_ENTRIES - 1] = &p2m_missing[0] };
 
 /* Arrays of p2m arrays expressed in mfns used for save/restore */
-static unsigned long p2m_top_mfn[TOP_ENTRIES]
-	__attribute__((section(".bss.page_aligned")));
+static unsigned long p2m_top_mfn[TOP_ENTRIES] __page_aligned_bss;
 
-static unsigned long p2m_top_mfn_list[
-			PAGE_ALIGN(TOP_ENTRIES / P2M_ENTRIES_PER_PAGE)]
-	__attribute__((section(".bss.page_aligned")));
+static unsigned long p2m_top_mfn_list[TOP_ENTRIES / P2M_ENTRIES_PER_PAGE]
+	__page_aligned_bss;
 
 static inline unsigned p2m_top_index(unsigned long pfn)
 {
@@ -181,15 +186,16 @@ void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
 	p2m_top[topidx][idx] = mfn;
 }
 
-xmaddr_t arbitrary_virt_to_machine(unsigned long address)
+xmaddr_t arbitrary_virt_to_machine(void *vaddr)
 {
+	unsigned long address = (unsigned long)vaddr;
 	unsigned int level;
 	pte_t *pte = lookup_address(address, &level);
 	unsigned offset = address & ~PAGE_MASK;
 
 	BUG_ON(pte == NULL);
 
-	return XMADDR((pte_mfn(*pte) << PAGE_SHIFT) + offset);
+	return XMADDR(((phys_addr_t)pte_mfn(*pte) << PAGE_SHIFT) + offset);
 }
 
 void make_lowmem_page_readonly(void *vaddr)
@@ -256,7 +262,8 @@ void xen_set_pmd_hyper(pmd_t *ptr, pmd_t val)
 
 	xen_mc_batch();
 
-	u.ptr = virt_to_machine(ptr).maddr;
+	/* ptr may be ioremapped for 64-bit pagetable setup */
+	u.ptr = arbitrary_virt_to_machine(ptr).maddr;
 	u.val = pmd_val_ma(val);
 	extend_mmu_update(&u);
 
@@ -283,35 +290,7 @@ void xen_set_pmd(pmd_t *ptr, pmd_t val)
  */
 void set_pte_mfn(unsigned long vaddr, unsigned long mfn, pgprot_t flags)
 {
-	pgd_t *pgd;
-	pud_t *pud;
-	pmd_t *pmd;
-	pte_t *pte;
-
-	pgd = swapper_pg_dir + pgd_index(vaddr);
-	if (pgd_none(*pgd)) {
-		BUG();
-		return;
-	}
-	pud = pud_offset(pgd, vaddr);
-	if (pud_none(*pud)) {
-		BUG();
-		return;
-	}
-	pmd = pmd_offset(pud, vaddr);
-	if (pmd_none(*pmd)) {
-		BUG();
-		return;
-	}
-	pte = pte_offset_kernel(pmd, vaddr);
-	/* <mfn,flags> stored as-is, to permit clearing entries */
-	xen_set_pte(pte, mfn_pte(mfn, flags));
-
-	/*
-	 * It's enough to flush this one mapping.
-	 * (PGE mappings get flushed as well)
-	 */
-	__flush_tlb_one(vaddr);
+	set_pte_vaddr(vaddr, mfn_pte(mfn, flags));
 }
 
 void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
@@ -364,8 +343,8 @@ void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
 static pteval_t pte_mfn_to_pfn(pteval_t val)
 {
 	if (val & _PAGE_PRESENT) {
-		unsigned long mfn = (val & PTE_MASK) >> PAGE_SHIFT;
-		pteval_t flags = val & ~PTE_MASK;
+		unsigned long mfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
+		pteval_t flags = val & PTE_FLAGS_MASK;
 		val = ((pteval_t)mfn_to_pfn(mfn) << PAGE_SHIFT) | flags;
 	}
 
@@ -375,8 +354,8 @@ static pteval_t pte_mfn_to_pfn(pteval_t val)
 static pteval_t pte_pfn_to_mfn(pteval_t val)
 {
 	if (val & _PAGE_PRESENT) {
-		unsigned long pfn = (val & PTE_MASK) >> PAGE_SHIFT;
-		pteval_t flags = val & ~PTE_MASK;
+		unsigned long pfn = (val & PTE_PFN_MASK) >> PAGE_SHIFT;
+		pteval_t flags = val & PTE_FLAGS_MASK;
 		val = ((pteval_t)pfn_to_mfn(pfn) << PAGE_SHIFT) | flags;
 	}
 
@@ -418,7 +397,8 @@ void xen_set_pud_hyper(pud_t *ptr, pud_t val)
 
 	xen_mc_batch();
 
-	u.ptr = virt_to_machine(ptr).maddr;
+	/* ptr may be ioremapped for 64-bit pagetable setup */
+	u.ptr = arbitrary_virt_to_machine(ptr).maddr;
 	u.val = pud_val_ma(val);
 	extend_mmu_update(&u);
 
@@ -441,14 +421,19 @@ void xen_set_pud(pud_t *ptr, pud_t val)
 
 void xen_set_pte(pte_t *ptep, pte_t pte)
 {
+#ifdef CONFIG_X86_PAE
 	ptep->pte_high = pte.pte_high;
 	smp_wmb();
 	ptep->pte_low = pte.pte_low;
+#else
+	*ptep = pte;
+#endif
 }
 
+#ifdef CONFIG_X86_PAE
 void xen_set_pte_atomic(pte_t *ptep, pte_t pte)
 {
-	set_64bit((u64 *)ptep, pte_val_ma(pte));
+	set_64bit((u64 *)ptep, native_pte_val(pte));
 }
 
 void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
@@ -462,6 +447,7 @@ void xen_pmd_clear(pmd_t *pmdp)
 {
 	set_pmd(pmdp, __pmd(0));
 }
+#endif	/* CONFIG_X86_PAE */
 
 pmd_t xen_make_pmd(pmdval_t pmd)
 {
@@ -469,78 +455,189 @@ pmd_t xen_make_pmd(pmdval_t pmd)
 	return native_make_pmd(pmd);
 }
 
+#if PAGETABLE_LEVELS == 4
+pudval_t xen_pud_val(pud_t pud)
+{
+	return pte_mfn_to_pfn(pud.pud);
+}
+
+pud_t xen_make_pud(pudval_t pud)
+{
+	pud = pte_pfn_to_mfn(pud);
+
+	return native_make_pud(pud);
+}
+
+pgd_t *xen_get_user_pgd(pgd_t *pgd)
+{
+	pgd_t *pgd_page = (pgd_t *)(((unsigned long)pgd) & PAGE_MASK);
+	unsigned offset = pgd - pgd_page;
+	pgd_t *user_ptr = NULL;
+
+	if (offset < pgd_index(USER_LIMIT)) {
+		struct page *page = virt_to_page(pgd_page);
+		user_ptr = (pgd_t *)page->private;
+		if (user_ptr)
+			user_ptr += offset;
+	}
+
+	return user_ptr;
+}
+
+static void __xen_set_pgd_hyper(pgd_t *ptr, pgd_t val)
+{
+	struct mmu_update u;
+
+	u.ptr = virt_to_machine(ptr).maddr;
+	u.val = pgd_val_ma(val);
+	extend_mmu_update(&u);
+}
+
+/*
+ * Raw hypercall-based set_pgd, intended for in early boot before
+ * there's a page structure.  This implies:
+ *  1. The only existing pagetable is the kernel's
+ *  2. It is always pinned
+ *  3. It has no user pagetable attached to it
+ */
+void __init xen_set_pgd_hyper(pgd_t *ptr, pgd_t val)
+{
+	preempt_disable();
+
+	xen_mc_batch();
+
+	__xen_set_pgd_hyper(ptr, val);
+
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+
+	preempt_enable();
+}
+
+void xen_set_pgd(pgd_t *ptr, pgd_t val)
+{
+	pgd_t *user_ptr = xen_get_user_pgd(ptr);
+
+	/* If page is not pinned, we can just update the entry
+	   directly */
+	if (!page_pinned(ptr)) {
+		*ptr = val;
+		if (user_ptr) {
+			WARN_ON(page_pinned(user_ptr));
+			*user_ptr = val;
+		}
+		return;
+	}
+
+	/* If it's pinned, then we can at least batch the kernel and
+	   user updates together. */
+	xen_mc_batch();
+
+	__xen_set_pgd_hyper(ptr, val);
+	if (user_ptr)
+		__xen_set_pgd_hyper(user_ptr, val);
+
+	xen_mc_issue(PARAVIRT_LAZY_MMU);
+}
+#endif	/* PAGETABLE_LEVELS == 4 */
+
 /*
-  (Yet another) pagetable walker.  This one is intended for pinning a
-  pagetable.  This means that it walks a pagetable and calls the
-  callback function on each page it finds making up the page table,
-  at every level.  It walks the entire pagetable, but it only bothers
-  pinning pte pages which are below pte_limit.  In the normal case
-  this will be TASK_SIZE, but at boot we need to pin up to
-  FIXADDR_TOP.  But the important bit is that we don't pin beyond
-  there, because then we start getting into Xen's ptes.
-*/
-static int pgd_walk(pgd_t *pgd_base, int (*func)(struct page *, enum pt_level),
+ * (Yet another) pagetable walker.  This one is intended for pinning a
+ * pagetable.  This means that it walks a pagetable and calls the
+ * callback function on each page it finds making up the page table,
+ * at every level.  It walks the entire pagetable, but it only bothers
+ * pinning pte pages which are below limit.  In the normal case this
+ * will be STACK_TOP_MAX, but at boot we need to pin up to
+ * FIXADDR_TOP.
+ *
+ * For 32-bit the important bit is that we don't pin beyond there,
+ * because then we start getting into Xen's ptes.
+ *
+ * For 64-bit, we must skip the Xen hole in the middle of the address
+ * space, just after the big x86-64 virtual hole.
+ */
+static int pgd_walk(pgd_t *pgd, int (*func)(struct page *, enum pt_level),
 		    unsigned long limit)
 {
-	pgd_t *pgd = pgd_base;
 	int flush = 0;
-	unsigned long addr = 0;
-	unsigned long pgd_next;
+	unsigned hole_low, hole_high;
+	unsigned pgdidx_limit, pudidx_limit, pmdidx_limit;
+	unsigned pgdidx, pudidx, pmdidx;
 
-	BUG_ON(limit > FIXADDR_TOP);
+	/* The limit is the last byte to be touched */
+	limit--;
+	BUG_ON(limit >= FIXADDR_TOP);
 
 	if (xen_feature(XENFEAT_auto_translated_physmap))
 		return 0;
 
-	for (; addr != FIXADDR_TOP; pgd++, addr = pgd_next) {
+	/*
+	 * 64-bit has a great big hole in the middle of the address
+	 * space, which contains the Xen mappings.  On 32-bit these
+	 * will end up making a zero-sized hole and so is a no-op.
+	 */
+	hole_low = pgd_index(USER_LIMIT);
+	hole_high = pgd_index(PAGE_OFFSET);
+
+	pgdidx_limit = pgd_index(limit);
+#if PTRS_PER_PUD > 1
+	pudidx_limit = pud_index(limit);
+#else
+	pudidx_limit = 0;
+#endif
+#if PTRS_PER_PMD > 1
+	pmdidx_limit = pmd_index(limit);
+#else
+	pmdidx_limit = 0;
+#endif
+
+	flush |= (*func)(virt_to_page(pgd), PT_PGD);
+
+	for (pgdidx = 0; pgdidx <= pgdidx_limit; pgdidx++) {
 		pud_t *pud;
-		unsigned long pud_limit, pud_next;
 
-		pgd_next = pud_limit = pgd_addr_end(addr, FIXADDR_TOP);
+		if (pgdidx >= hole_low && pgdidx < hole_high)
+			continue;
 
-		if (!pgd_val(*pgd))
+		if (!pgd_val(pgd[pgdidx]))
 			continue;
 
-		pud = pud_offset(pgd, 0);
+		pud = pud_offset(&pgd[pgdidx], 0);
 
 		if (PTRS_PER_PUD > 1) /* not folded */
 			flush |= (*func)(virt_to_page(pud), PT_PUD);
 
-		for (; addr != pud_limit; pud++, addr = pud_next) {
+		for (pudidx = 0; pudidx < PTRS_PER_PUD; pudidx++) {
 			pmd_t *pmd;
-			unsigned long pmd_limit;
 
-			pud_next = pud_addr_end(addr, pud_limit);
-
-			if (pud_next < limit)
-				pmd_limit = pud_next;
-			else
-				pmd_limit = limit;
+			if (pgdidx == pgdidx_limit &&
+			    pudidx > pudidx_limit)
+				goto out;
 
-			if (pud_none(*pud))
+			if (pud_none(pud[pudidx]))
 				continue;
 
-			pmd = pmd_offset(pud, 0);
+			pmd = pmd_offset(&pud[pudidx], 0);
 
 			if (PTRS_PER_PMD > 1) /* not folded */
 				flush |= (*func)(virt_to_page(pmd), PT_PMD);
 
-			for (; addr != pmd_limit; pmd++) {
-				addr += (PAGE_SIZE * PTRS_PER_PTE);
-				if ((pmd_limit-1) < (addr-1)) {
-					addr = pmd_limit;
-					break;
-				}
+			for (pmdidx = 0; pmdidx < PTRS_PER_PMD; pmdidx++) {
+				struct page *pte;
+
+				if (pgdidx == pgdidx_limit &&
+				    pudidx == pudidx_limit &&
+				    pmdidx > pmdidx_limit)
+					goto out;
 
-				if (pmd_none(*pmd))
+				if (pmd_none(pmd[pmdidx]))
 					continue;
 
-				flush |= (*func)(pmd_page(*pmd), PT_PTE);
+				pte = pmd_page(pmd[pmdidx]);
+				flush |= (*func)(pte, PT_PTE);
 			}
 		}
 	}
-
-	flush |= (*func)(virt_to_page(pgd_base), PT_PGD);
+out:
 
 	return flush;
 }
@@ -622,14 +719,31 @@ void xen_pgd_pin(pgd_t *pgd)
 {
 	xen_mc_batch();
 
-	if (pgd_walk(pgd, pin_page, TASK_SIZE)) {
+	if (pgd_walk(pgd, pin_page, USER_LIMIT)) {
 		/* re-enable interrupts for kmap_flush_unused */
 		xen_mc_issue(0);
 		kmap_flush_unused();
 		xen_mc_batch();
 	}
 
+#ifdef CONFIG_X86_64
+	{
+		pgd_t *user_pgd = xen_get_user_pgd(pgd);
+
+		xen_do_pin(MMUEXT_PIN_L4_TABLE, PFN_DOWN(__pa(pgd)));
+
+		if (user_pgd) {
+			pin_page(virt_to_page(user_pgd), PT_PGD);
+			xen_do_pin(MMUEXT_PIN_L4_TABLE, PFN_DOWN(__pa(user_pgd)));
+		}
+	}
+#else /* CONFIG_X86_32 */
+#ifdef CONFIG_X86_PAE
+	/* Need to make sure unshared kernel PMD is pinnable */
+	pin_page(virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), PT_PMD);
+#endif
 	xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd)));
+#endif /* CONFIG_X86_64 */
 	xen_mc_issue(0);
 }
 
@@ -656,9 +770,11 @@ void xen_mm_pin_all(void)
 	spin_unlock_irqrestore(&pgd_lock, flags);
 }
 
-/* The init_mm pagetable is really pinned as soon as its created, but
-   that's before we have page structures to store the bits.  So do all
-   the book-keeping now. */
+/*
+ * The init_mm pagetable is really pinned as soon as its created, but
+ * that's before we have page structures to store the bits.  So do all
+ * the book-keeping now.
+ */
 static __init int mark_pinned(struct page *page, enum pt_level level)
 {
 	SetPagePinned(page);
@@ -708,7 +824,23 @@ static void xen_pgd_unpin(pgd_t *pgd)
 
 	xen_do_pin(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(pgd)));
 
-	pgd_walk(pgd, unpin_page, TASK_SIZE);
+#ifdef CONFIG_X86_64
+	{
+		pgd_t *user_pgd = xen_get_user_pgd(pgd);
+
+		if (user_pgd) {
+			xen_do_pin(MMUEXT_UNPIN_TABLE, PFN_DOWN(__pa(user_pgd)));
+			unpin_page(virt_to_page(user_pgd), PT_PGD);
+		}
+	}
+#endif
+
+#ifdef CONFIG_X86_PAE
+	/* Need to make sure unshared kernel PMD is unpinned */
+	pin_page(virt_to_page(pgd_page(pgd[pgd_index(TASK_SIZE)])), PT_PMD);
+#endif
+
+	pgd_walk(pgd, unpin_page, USER_LIMIT);
 
 	xen_mc_issue(0);
 }
@@ -727,7 +859,6 @@ void xen_mm_unpin_all(void)
 	list_for_each_entry(page, &pgd_list, lru) {
 		if (PageSavePinned(page)) {
 			BUG_ON(!PagePinned(page));
-			printk("unpinning pinned %p\n", page_address(page));
 			xen_pgd_unpin((pgd_t *)page_address(page));
 			ClearPageSavePinned(page);
 		}
@@ -757,8 +888,15 @@ void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm)
 static void drop_other_mm_ref(void *info)
 {
 	struct mm_struct *mm = info;
+	struct mm_struct *active_mm;
+
+#ifdef CONFIG_X86_64
+	active_mm = read_pda(active_mm);
+#else
+	active_mm = __get_cpu_var(cpu_tlbstate).active_mm;
+#endif
 
-	if (__get_cpu_var(cpu_tlbstate).active_mm == mm)
+	if (active_mm == mm)
 		leave_mm(smp_processor_id());
 
 	/* If this cpu still has a stale cr3 reference, then make sure
@@ -796,7 +934,7 @@ static void drop_mm_ref(struct mm_struct *mm)
 	}
 
 	if (!cpus_empty(mask))
-		xen_smp_call_function_mask(mask, drop_other_mm_ref, mm, 1);
+		smp_call_function_mask(mask, drop_other_mm_ref, mm, 1);
 }
 #else
 static void drop_mm_ref(struct mm_struct *mm)
diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h
index 297bf9f5b8bc..0f59bd03f9e3 100644
--- a/arch/x86/xen/mmu.h
+++ b/arch/x86/xen/mmu.h
@@ -10,18 +10,6 @@ enum pt_level {
 	PT_PTE
 };
 
-/*
- * Page-directory addresses above 4GB do not fit into architectural %cr3.
- * When accessing %cr3, or equivalent field in vcpu_guest_context, guests
- * must use the following accessor macros to pack/unpack valid MFNs.
- *
- * Note that Xen is using the fact that the pagetable base is always
- * page-aligned, and putting the 12 MSB of the address into the 12 LSB
- * of cr3.
- */
-#define xen_pfn_to_cr3(pfn) (((unsigned)(pfn) << 12) | ((unsigned)(pfn) >> 20))
-#define xen_cr3_to_pfn(cr3) (((unsigned)(cr3) >> 12) | ((unsigned)(cr3) << 20))
-
 
 void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
 
@@ -44,13 +32,26 @@ pgd_t xen_make_pgd(pgdval_t);
 void xen_set_pte(pte_t *ptep, pte_t pteval);
 void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
 		    pte_t *ptep, pte_t pteval);
+
+#ifdef CONFIG_X86_PAE
 void xen_set_pte_atomic(pte_t *ptep, pte_t pte);
+void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
+void xen_pmd_clear(pmd_t *pmdp);
+#endif	/* CONFIG_X86_PAE */
+
 void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval);
 void xen_set_pud(pud_t *ptr, pud_t val);
 void xen_set_pmd_hyper(pmd_t *pmdp, pmd_t pmdval);
 void xen_set_pud_hyper(pud_t *ptr, pud_t val);
-void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
-void xen_pmd_clear(pmd_t *pmdp);
+
+#if PAGETABLE_LEVELS == 4
+pudval_t xen_pud_val(pud_t pud);
+pud_t xen_make_pud(pudval_t pudval);
+void xen_set_pgd(pgd_t *pgdp, pgd_t pgd);
+void xen_set_pgd_hyper(pgd_t *pgdp, pgd_t pgd);
+#endif
+
+pgd_t *xen_get_user_pgd(pgd_t *pgd);
 
 pte_t xen_ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr, pte_t *ptep);
 void  xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr,
diff --git a/arch/x86/xen/multicalls.c b/arch/x86/xen/multicalls.c
index 3c63c4da7ed1..9efd1c6c9776 100644
--- a/arch/x86/xen/multicalls.c
+++ b/arch/x86/xen/multicalls.c
@@ -76,6 +76,7 @@ void xen_mc_flush(void)
 		if (ret) {
 			printk(KERN_ERR "%d multicall(s) failed: cpu %d\n",
 			       ret, smp_processor_id());
+			dump_stack();
 			for (i = 0; i < b->mcidx; i++) {
 				printk("  call %2d/%d: op=%lu arg=[%lx] result=%ld\n",
 				       i+1, b->mcidx,
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index e0a39595bde3..b6acc3a0af46 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -83,30 +83,72 @@ static void xen_idle(void)
 
 /*
  * Set the bit indicating "nosegneg" library variants should be used.
+ * We only need to bother in pure 32-bit mode; compat 32-bit processes
+ * can have un-truncated segments, so wrapping around is allowed.
  */
 static void __init fiddle_vdso(void)
 {
-	extern const char vdso32_default_start;
-	u32 *mask = VDSO32_SYMBOL(&vdso32_default_start, NOTE_MASK);
+#ifdef CONFIG_X86_32
+	u32 *mask;
+	mask = VDSO32_SYMBOL(&vdso32_int80_start, NOTE_MASK);
 	*mask |= 1 << VDSO_NOTE_NONEGSEG_BIT;
+	mask = VDSO32_SYMBOL(&vdso32_sysenter_start, NOTE_MASK);
+	*mask |= 1 << VDSO_NOTE_NONEGSEG_BIT;
+#endif
 }
 
-void xen_enable_sysenter(void)
+static __cpuinit int register_callback(unsigned type, const void *func)
 {
-	int cpu = smp_processor_id();
-	extern void xen_sysenter_target(void);
-	/* Mask events on entry, even though they get enabled immediately */
-	static struct callback_register sysenter = {
-		.type = CALLBACKTYPE_sysenter,
-		.address = { __KERNEL_CS, (unsigned long)xen_sysenter_target },
+	struct callback_register callback = {
+		.type = type,
+		.address = XEN_CALLBACK(__KERNEL_CS, func),
 		.flags = CALLBACKF_mask_events,
 	};
 
-	if (!boot_cpu_has(X86_FEATURE_SEP) ||
-	    HYPERVISOR_callback_op(CALLBACKOP_register, &sysenter) != 0) {
-		clear_cpu_cap(&cpu_data(cpu), X86_FEATURE_SEP);
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_SEP);
+	return HYPERVISOR_callback_op(CALLBACKOP_register, &callback);
+}
+
+void __cpuinit xen_enable_sysenter(void)
+{
+	extern void xen_sysenter_target(void);
+	int ret;
+	unsigned sysenter_feature;
+
+#ifdef CONFIG_X86_32
+	sysenter_feature = X86_FEATURE_SEP;
+#else
+	sysenter_feature = X86_FEATURE_SYSENTER32;
+#endif
+
+	if (!boot_cpu_has(sysenter_feature))
+		return;
+
+	ret = register_callback(CALLBACKTYPE_sysenter, xen_sysenter_target);
+	if(ret != 0)
+		setup_clear_cpu_cap(sysenter_feature);
+}
+
+void __cpuinit xen_enable_syscall(void)
+{
+#ifdef CONFIG_X86_64
+	int ret;
+	extern void xen_syscall_target(void);
+	extern void xen_syscall32_target(void);
+
+	ret = register_callback(CALLBACKTYPE_syscall, xen_syscall_target);
+	if (ret != 0) {
+		printk(KERN_ERR "Failed to set syscall callback: %d\n", ret);
+		/* Pretty fatal; 64-bit userspace has no other
+		   mechanism for syscalls. */
 	}
+
+	if (boot_cpu_has(X86_FEATURE_SYSCALL32)) {
+		ret = register_callback(CALLBACKTYPE_syscall32,
+					xen_syscall32_target);
+		if (ret != 0)
+			setup_clear_cpu_cap(X86_FEATURE_SYSCALL32);
+	}
+#endif /* CONFIG_X86_64 */
 }
 
 void __init xen_arch_setup(void)
@@ -120,10 +162,12 @@ void __init xen_arch_setup(void)
 	if (!xen_feature(XENFEAT_auto_translated_physmap))
 		HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_pae_extended_cr3);
 
-	HYPERVISOR_set_callbacks(__KERNEL_CS, (unsigned long)xen_hypervisor_callback,
-				 __KERNEL_CS, (unsigned long)xen_failsafe_callback);
+	if (register_callback(CALLBACKTYPE_event, xen_hypervisor_callback) ||
+	    register_callback(CALLBACKTYPE_failsafe, xen_failsafe_callback))
+		BUG();
 
 	xen_enable_sysenter();
+	xen_enable_syscall();
 
 	set_iopl.iopl = 1;
 	rc = HYPERVISOR_physdev_op(PHYSDEVOP_set_iopl, &set_iopl);
@@ -143,11 +187,6 @@ void __init xen_arch_setup(void)
 
 	pm_idle = xen_idle;
 
-#ifdef CONFIG_SMP
-	/* fill cpus_possible with all available cpus */
-	xen_fill_possible_map();
-#endif
-
 	paravirt_disable_iospace();
 
 	fiddle_vdso();
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index d2e3c20127d7..d8faf79a0a1d 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -15,6 +15,7 @@
  * This does not handle HOTPLUG_CPU yet.
  */
 #include <linux/sched.h>
+#include <linux/kernel_stat.h>
 #include <linux/err.h>
 #include <linux/smp.h>
 
@@ -35,28 +36,17 @@
 #include "xen-ops.h"
 #include "mmu.h"
 
+static void __cpuinit xen_init_lock_cpu(int cpu);
+
 cpumask_t xen_cpu_initialized_map;
-static DEFINE_PER_CPU(int, resched_irq) = -1;
-static DEFINE_PER_CPU(int, callfunc_irq) = -1;
-static DEFINE_PER_CPU(int, debug_irq) = -1;
 
-/*
- * Structure and data for smp_call_function(). This is designed to minimise
- * static memory requirements. It also looks cleaner.
- */
-static DEFINE_SPINLOCK(call_lock);
-
-struct call_data_struct {
-	void (*func) (void *info);
-	void *info;
-	atomic_t started;
-	atomic_t finished;
-	int wait;
-};
+static DEFINE_PER_CPU(int, resched_irq);
+static DEFINE_PER_CPU(int, callfunc_irq);
+static DEFINE_PER_CPU(int, callfuncsingle_irq);
+static DEFINE_PER_CPU(int, debug_irq) = -1;
 
 static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id);
-
-static struct call_data_struct *call_data;
+static irqreturn_t xen_call_function_single_interrupt(int irq, void *dev_id);
 
 /*
  * Reschedule call back. Nothing to do,
@@ -79,13 +69,22 @@ static __cpuinit void cpu_bringup_and_idle(void)
 	int cpu = smp_processor_id();
 
 	cpu_init();
+	preempt_disable();
+
 	xen_enable_sysenter();
+	xen_enable_syscall();
 
-	preempt_disable();
-	per_cpu(cpu_state, cpu) = CPU_ONLINE;
+	cpu = smp_processor_id();
+	smp_store_cpu_info(cpu);
+	cpu_data(cpu).x86_max_cores = 1;
+	set_cpu_sibling_map(cpu);
 
 	xen_setup_cpu_clockevents();
 
+	cpu_set(cpu, cpu_online_map);
+	x86_write_percpu(cpu_state, CPU_ONLINE);
+	wmb();
+
 	/* We can take interrupts now: we're officially "up". */
 	local_irq_enable();
 
@@ -128,6 +127,17 @@ static int xen_smp_intr_init(unsigned int cpu)
 		goto fail;
 	per_cpu(debug_irq, cpu) = rc;
 
+	callfunc_name = kasprintf(GFP_KERNEL, "callfuncsingle%d", cpu);
+	rc = bind_ipi_to_irqhandler(XEN_CALL_FUNCTION_SINGLE_VECTOR,
+				    cpu,
+				    xen_call_function_single_interrupt,
+				    IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING,
+				    callfunc_name,
+				    NULL);
+	if (rc < 0)
+		goto fail;
+	per_cpu(callfuncsingle_irq, cpu) = rc;
+
 	return 0;
 
  fail:
@@ -137,59 +147,45 @@ static int xen_smp_intr_init(unsigned int cpu)
 		unbind_from_irqhandler(per_cpu(callfunc_irq, cpu), NULL);
 	if (per_cpu(debug_irq, cpu) >= 0)
 		unbind_from_irqhandler(per_cpu(debug_irq, cpu), NULL);
+	if (per_cpu(callfuncsingle_irq, cpu) >= 0)
+		unbind_from_irqhandler(per_cpu(callfuncsingle_irq, cpu), NULL);
+
 	return rc;
 }
 
-void __init xen_fill_possible_map(void)
+static void __init xen_fill_possible_map(void)
 {
 	int i, rc;
 
 	for (i = 0; i < NR_CPUS; i++) {
 		rc = HYPERVISOR_vcpu_op(VCPUOP_is_up, i, NULL);
-		if (rc >= 0)
+		if (rc >= 0) {
+			num_processors++;
 			cpu_set(i, cpu_possible_map);
+		}
 	}
 }
 
-void __init xen_smp_prepare_boot_cpu(void)
+static void __init xen_smp_prepare_boot_cpu(void)
 {
-	int cpu;
-
 	BUG_ON(smp_processor_id() != 0);
 	native_smp_prepare_boot_cpu();
 
 	/* We've switched to the "real" per-cpu gdt, so make sure the
 	   old memory can be recycled */
-	make_lowmem_page_readwrite(&per_cpu__gdt_page);
-
-	for_each_possible_cpu(cpu) {
-		cpus_clear(per_cpu(cpu_sibling_map, cpu));
-		/*
-		 * cpu_core_map lives in a per cpu area that is cleared
-		 * when the per cpu array is allocated.
-		 *
-		 * cpus_clear(per_cpu(cpu_core_map, cpu));
-		 */
-	}
+	make_lowmem_page_readwrite(&per_cpu_var(gdt_page));
 
 	xen_setup_vcpu_info_placement();
 }
 
-void __init xen_smp_prepare_cpus(unsigned int max_cpus)
+static void __init xen_smp_prepare_cpus(unsigned int max_cpus)
 {
 	unsigned cpu;
 
-	for_each_possible_cpu(cpu) {
-		cpus_clear(per_cpu(cpu_sibling_map, cpu));
-		/*
-		 * cpu_core_ map will be zeroed when the per
-		 * cpu area is allocated.
-		 *
-		 * cpus_clear(per_cpu(cpu_core_map, cpu));
-		 */
-	}
+	xen_init_lock_cpu(0);
 
 	smp_store_cpu_info(0);
+	cpu_data(0).x86_max_cores = 1;
 	set_cpu_sibling_map(0);
 
 	if (xen_smp_intr_init(0))
@@ -224,7 +220,7 @@ static __cpuinit int
 cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 {
 	struct vcpu_guest_context *ctxt;
-	struct gdt_page *gdt = &per_cpu(gdt_page, cpu);
+	struct desc_struct *gdt;
 
 	if (cpu_test_and_set(cpu, xen_cpu_initialized_map))
 		return 0;
@@ -233,12 +229,15 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 	if (ctxt == NULL)
 		return -ENOMEM;
 
+	gdt = get_cpu_gdt_table(cpu);
+
 	ctxt->flags = VGCF_IN_KERNEL;
 	ctxt->user_regs.ds = __USER_DS;
 	ctxt->user_regs.es = __USER_DS;
-	ctxt->user_regs.fs = __KERNEL_PERCPU;
-	ctxt->user_regs.gs = 0;
 	ctxt->user_regs.ss = __KERNEL_DS;
+#ifdef CONFIG_X86_32
+	ctxt->user_regs.fs = __KERNEL_PERCPU;
+#endif
 	ctxt->user_regs.eip = (unsigned long)cpu_bringup_and_idle;
 	ctxt->user_regs.eflags = 0x1000; /* IOPL_RING1 */
 
@@ -248,11 +247,11 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 
 	ctxt->ldt_ents = 0;
 
-	BUG_ON((unsigned long)gdt->gdt & ~PAGE_MASK);
-	make_lowmem_page_readonly(gdt->gdt);
+	BUG_ON((unsigned long)gdt & ~PAGE_MASK);
+	make_lowmem_page_readonly(gdt);
 
-	ctxt->gdt_frames[0] = virt_to_mfn(gdt->gdt);
-	ctxt->gdt_ents      = ARRAY_SIZE(gdt->gdt);
+	ctxt->gdt_frames[0] = virt_to_mfn(gdt);
+	ctxt->gdt_ents      = GDT_ENTRIES;
 
 	ctxt->user_regs.cs = __KERNEL_CS;
 	ctxt->user_regs.esp = idle->thread.sp0 - sizeof(struct pt_regs);
@@ -260,9 +259,11 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 	ctxt->kernel_ss = __KERNEL_DS;
 	ctxt->kernel_sp = idle->thread.sp0;
 
+#ifdef CONFIG_X86_32
 	ctxt->event_callback_cs     = __KERNEL_CS;
-	ctxt->event_callback_eip    = (unsigned long)xen_hypervisor_callback;
 	ctxt->failsafe_callback_cs  = __KERNEL_CS;
+#endif
+	ctxt->event_callback_eip    = (unsigned long)xen_hypervisor_callback;
 	ctxt->failsafe_callback_eip = (unsigned long)xen_failsafe_callback;
 
 	per_cpu(xen_cr3, cpu) = __pa(swapper_pg_dir);
@@ -275,7 +276,7 @@ cpu_initialize_context(unsigned int cpu, struct task_struct *idle)
 	return 0;
 }
 
-int __cpuinit xen_cpu_up(unsigned int cpu)
+static int __cpuinit xen_cpu_up(unsigned int cpu)
 {
 	struct task_struct *idle = idle_task(cpu);
 	int rc;
@@ -286,10 +287,28 @@ int __cpuinit xen_cpu_up(unsigned int cpu)
 		return rc;
 #endif
 
+#ifdef CONFIG_X86_64
+	/* Allocate node local memory for AP pdas */
+	WARN_ON(cpu == 0);
+	if (cpu > 0) {
+		rc = get_local_pda(cpu);
+		if (rc)
+			return rc;
+	}
+#endif
+
+#ifdef CONFIG_X86_32
 	init_gdt(cpu);
 	per_cpu(current_task, cpu) = idle;
 	irq_ctx_init(cpu);
+#else
+	cpu_pda(cpu)->pcurrent = idle;
+	clear_tsk_thread_flag(idle, TIF_FORK);
+#endif
 	xen_setup_timer(cpu);
+	xen_init_lock_cpu(cpu);
+
+	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
 
 	/* make sure interrupts start blocked */
 	per_cpu(xen_vcpu, cpu)->evtchn_upcall_mask = 1;
@@ -305,20 +324,18 @@ int __cpuinit xen_cpu_up(unsigned int cpu)
 	if (rc)
 		return rc;
 
-	smp_store_cpu_info(cpu);
-	set_cpu_sibling_map(cpu);
-	/* This must be done before setting cpu_online_map */
-	wmb();
-
-	cpu_set(cpu, cpu_online_map);
-
 	rc = HYPERVISOR_vcpu_op(VCPUOP_up, cpu, NULL);
 	BUG_ON(rc);
 
+	while(per_cpu(cpu_state, cpu) != CPU_ONLINE) {
+		HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+		barrier();
+	}
+
 	return 0;
 }
 
-void xen_smp_cpus_done(unsigned int max_cpus)
+static void xen_smp_cpus_done(unsigned int max_cpus)
 {
 }
 
@@ -334,104 +351,254 @@ static void stop_self(void *v)
 	BUG();
 }
 
-void xen_smp_send_stop(void)
+static void xen_smp_send_stop(void)
 {
-	smp_call_function(stop_self, NULL, 0, 0);
+	smp_call_function(stop_self, NULL, 0);
 }
 
-void xen_smp_send_reschedule(int cpu)
+static void xen_smp_send_reschedule(int cpu)
 {
 	xen_send_IPI_one(cpu, XEN_RESCHEDULE_VECTOR);
 }
 
-
 static void xen_send_IPI_mask(cpumask_t mask, enum ipi_vector vector)
 {
 	unsigned cpu;
 
 	cpus_and(mask, mask, cpu_online_map);
 
-	for_each_cpu_mask(cpu, mask)
+	for_each_cpu_mask_nr(cpu, mask)
 		xen_send_IPI_one(cpu, vector);
 }
 
+static void xen_smp_send_call_function_ipi(cpumask_t mask)
+{
+	int cpu;
+
+	xen_send_IPI_mask(mask, XEN_CALL_FUNCTION_VECTOR);
+
+	/* Make sure other vcpus get a chance to run if they need to. */
+	for_each_cpu_mask_nr(cpu, mask) {
+		if (xen_vcpu_stolen(cpu)) {
+			HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+			break;
+		}
+	}
+}
+
+static void xen_smp_send_call_function_single_ipi(int cpu)
+{
+	xen_send_IPI_mask(cpumask_of_cpu(cpu), XEN_CALL_FUNCTION_SINGLE_VECTOR);
+}
+
 static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id)
 {
-	void (*func) (void *info) = call_data->func;
-	void *info = call_data->info;
-	int wait = call_data->wait;
-
-	/*
-	 * Notify initiating CPU that I've grabbed the data and am
-	 * about to execute the function
-	 */
-	mb();
-	atomic_inc(&call_data->started);
-	/*
-	 * At this point the info structure may be out of scope unless wait==1
-	 */
 	irq_enter();
-	(*func)(info);
+	generic_smp_call_function_interrupt();
+#ifdef CONFIG_X86_32
 	__get_cpu_var(irq_stat).irq_call_count++;
+#else
+	add_pda(irq_call_count, 1);
+#endif
 	irq_exit();
 
-	if (wait) {
-		mb();		/* commit everything before setting finished */
-		atomic_inc(&call_data->finished);
-	}
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t xen_call_function_single_interrupt(int irq, void *dev_id)
+{
+	irq_enter();
+	generic_smp_call_function_single_interrupt();
+#ifdef CONFIG_X86_32
+	__get_cpu_var(irq_stat).irq_call_count++;
+#else
+	add_pda(irq_call_count, 1);
+#endif
+	irq_exit();
 
 	return IRQ_HANDLED;
 }
 
-int xen_smp_call_function_mask(cpumask_t mask, void (*func)(void *),
-			       void *info, int wait)
+struct xen_spinlock {
+	unsigned char lock;		/* 0 -> free; 1 -> locked */
+	unsigned short spinners;	/* count of waiting cpus */
+};
+
+static int xen_spin_is_locked(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+
+	return xl->lock != 0;
+}
+
+static int xen_spin_is_contended(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+
+	/* Not strictly true; this is only the count of contended
+	   lock-takers entering the slow path. */
+	return xl->spinners != 0;
+}
+
+static int xen_spin_trylock(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+	u8 old = 1;
+
+	asm("xchgb %b0,%1"
+	    : "+q" (old), "+m" (xl->lock) : : "memory");
+
+	return old == 0;
+}
+
+static DEFINE_PER_CPU(int, lock_kicker_irq) = -1;
+static DEFINE_PER_CPU(struct xen_spinlock *, lock_spinners);
+
+static inline void spinning_lock(struct xen_spinlock *xl)
 {
-	struct call_data_struct data;
-	int cpus, cpu;
-	bool yield;
+	__get_cpu_var(lock_spinners) = xl;
+	wmb();			/* set lock of interest before count */
+	asm(LOCK_PREFIX " incw %0"
+	    : "+m" (xl->spinners) : : "memory");
+}
 
-	/* Holding any lock stops cpus from going down. */
-	spin_lock(&call_lock);
+static inline void unspinning_lock(struct xen_spinlock *xl)
+{
+	asm(LOCK_PREFIX " decw %0"
+	    : "+m" (xl->spinners) : : "memory");
+	wmb();			/* decrement count before clearing lock */
+	__get_cpu_var(lock_spinners) = NULL;
+}
 
-	cpu_clear(smp_processor_id(), mask);
+static noinline int xen_spin_lock_slow(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+	int irq = __get_cpu_var(lock_kicker_irq);
+	int ret;
 
-	cpus = cpus_weight(mask);
-	if (!cpus) {
-		spin_unlock(&call_lock);
+	/* If kicker interrupts not initialized yet, just spin */
+	if (irq == -1)
 		return 0;
+
+	/* announce we're spinning */
+	spinning_lock(xl);
+
+	/* clear pending */
+	xen_clear_irq_pending(irq);
+
+	/* check again make sure it didn't become free while
+	   we weren't looking  */
+	ret = xen_spin_trylock(lock);
+	if (ret)
+		goto out;
+
+	/* block until irq becomes pending */
+	xen_poll_irq(irq);
+	kstat_this_cpu.irqs[irq]++;
+
+out:
+	unspinning_lock(xl);
+	return ret;
+}
+
+static void xen_spin_lock(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
+	int timeout;
+	u8 oldval;
+
+	do {
+		timeout = 1 << 10;
+
+		asm("1: xchgb %1,%0\n"
+		    "   testb %1,%1\n"
+		    "   jz 3f\n"
+		    "2: rep;nop\n"
+		    "   cmpb $0,%0\n"
+		    "   je 1b\n"
+		    "   dec %2\n"
+		    "   jnz 2b\n"
+		    "3:\n"
+		    : "+m" (xl->lock), "=q" (oldval), "+r" (timeout)
+		    : "1" (1)
+		    : "memory");
+
+	} while (unlikely(oldval != 0 && !xen_spin_lock_slow(lock)));
+}
+
+static noinline void xen_spin_unlock_slow(struct xen_spinlock *xl)
+{
+	int cpu;
+
+	for_each_online_cpu(cpu) {
+		/* XXX should mix up next cpu selection */
+		if (per_cpu(lock_spinners, cpu) == xl) {
+			xen_send_IPI_one(cpu, XEN_SPIN_UNLOCK_VECTOR);
+			break;
+		}
 	}
+}
 
-	/* Can deadlock when called with interrupts disabled */
-	WARN_ON(irqs_disabled());
+static void xen_spin_unlock(struct raw_spinlock *lock)
+{
+	struct xen_spinlock *xl = (struct xen_spinlock *)lock;
 
-	data.func = func;
-	data.info = info;
-	atomic_set(&data.started, 0);
-	data.wait = wait;
-	if (wait)
-		atomic_set(&data.finished, 0);
+	smp_wmb();		/* make sure no writes get moved after unlock */
+	xl->lock = 0;		/* release lock */
 
-	call_data = &data;
-	mb();			/* write everything before IPI */
+	/* make sure unlock happens before kick */
+	barrier();
 
-	/* Send a message to other CPUs and wait for them to respond */
-	xen_send_IPI_mask(mask, XEN_CALL_FUNCTION_VECTOR);
+	if (unlikely(xl->spinners))
+		xen_spin_unlock_slow(xl);
+}
 
-	/* Make sure other vcpus get a chance to run if they need to. */
-	yield = false;
-	for_each_cpu_mask(cpu, mask)
-		if (xen_vcpu_stolen(cpu))
-			yield = true;
+static __cpuinit void xen_init_lock_cpu(int cpu)
+{
+	int irq;
+	const char *name;
+
+	name = kasprintf(GFP_KERNEL, "spinlock%d", cpu);
+	irq = bind_ipi_to_irqhandler(XEN_SPIN_UNLOCK_VECTOR,
+				     cpu,
+				     xen_reschedule_interrupt,
+				     IRQF_DISABLED|IRQF_PERCPU|IRQF_NOBALANCING,
+				     name,
+				     NULL);
+
+	if (irq >= 0) {
+		disable_irq(irq); /* make sure it's never delivered */
+		per_cpu(lock_kicker_irq, cpu) = irq;
+	}
 
-	if (yield)
-		HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+	printk("cpu %d spinlock event irq %d\n", cpu, irq);
+}
 
-	/* Wait for response */
-	while (atomic_read(&data.started) != cpus ||
-	       (wait && atomic_read(&data.finished) != cpus))
-		cpu_relax();
+static void __init xen_init_spinlocks(void)
+{
+	pv_lock_ops.spin_is_locked = xen_spin_is_locked;
+	pv_lock_ops.spin_is_contended = xen_spin_is_contended;
+	pv_lock_ops.spin_lock = xen_spin_lock;
+	pv_lock_ops.spin_trylock = xen_spin_trylock;
+	pv_lock_ops.spin_unlock = xen_spin_unlock;
+}
 
-	spin_unlock(&call_lock);
+static const struct smp_ops xen_smp_ops __initdata = {
+	.smp_prepare_boot_cpu = xen_smp_prepare_boot_cpu,
+	.smp_prepare_cpus = xen_smp_prepare_cpus,
+	.cpu_up = xen_cpu_up,
+	.smp_cpus_done = xen_smp_cpus_done,
 
-	return 0;
+	.smp_send_stop = xen_smp_send_stop,
+	.smp_send_reschedule = xen_smp_send_reschedule,
+
+	.send_call_func_ipi = xen_smp_send_call_function_ipi,
+	.send_call_func_single_ipi = xen_smp_send_call_function_single_ipi,
+};
+
+void __init xen_smp_init(void)
+{
+	smp_ops = xen_smp_ops;
+	xen_fill_possible_map();
+	xen_init_spinlocks();
 }
diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c
index 251669a932d4..2a234db5949b 100644
--- a/arch/x86/xen/suspend.c
+++ b/arch/x86/xen/suspend.c
@@ -38,8 +38,11 @@ void xen_post_suspend(int suspend_cancelled)
 		xen_cpu_initialized_map = cpu_online_map;
 #endif
 		xen_vcpu_restore();
-		xen_timer_resume();
 	}
 
 }
 
+void xen_arch_resume(void)
+{
+	/* nothing */
+}
diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm_32.S
index 2497a30f41de..2497a30f41de 100644
--- a/arch/x86/xen/xen-asm.S
+++ b/arch/x86/xen/xen-asm_32.S
diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S
new file mode 100644
index 000000000000..7f58304fafb3
--- /dev/null
+++ b/arch/x86/xen/xen-asm_64.S
@@ -0,0 +1,271 @@
+/*
+	Asm versions of Xen pv-ops, suitable for either direct use or inlining.
+	The inline versions are the same as the direct-use versions, with the
+	pre- and post-amble chopped off.
+
+	This code is encoded for size rather than absolute efficiency,
+	with a view to being able to inline as much as possible.
+
+	We only bother with direct forms (ie, vcpu in pda) of the operations
+	here; the indirect forms are better handled in C, since they're
+	generally too large to inline anyway.
+ */
+
+#include <linux/linkage.h>
+
+#include <asm/asm-offsets.h>
+#include <asm/processor-flags.h>
+#include <asm/errno.h>
+#include <asm/segment.h>
+
+#include <xen/interface/xen.h>
+
+#define RELOC(x, v)	.globl x##_reloc; x##_reloc=v
+#define ENDPATCH(x)	.globl x##_end; x##_end=.
+
+/* Pseudo-flag used for virtual NMI, which we don't implement yet */
+#define XEN_EFLAGS_NMI	0x80000000
+
+#if 0
+#include <asm/percpu.h>
+
+/*
+	Enable events.  This clears the event mask and tests the pending
+	event status with one and operation.  If there are pending
+	events, then enter the hypervisor to get them handled.
+ */
+ENTRY(xen_irq_enable_direct)
+	/* Unmask events */
+	movb $0, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+
+	/* Preempt here doesn't matter because that will deal with
+	   any pending interrupts.  The pending check may end up being
+	   run on the wrong CPU, but that doesn't hurt. */
+
+	/* Test for pending */
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending)
+	jz 1f
+
+2:	call check_events
+1:
+ENDPATCH(xen_irq_enable_direct)
+	ret
+	ENDPROC(xen_irq_enable_direct)
+	RELOC(xen_irq_enable_direct, 2b+1)
+
+/*
+	Disabling events is simply a matter of making the event mask
+	non-zero.
+ */
+ENTRY(xen_irq_disable_direct)
+	movb $1, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+ENDPATCH(xen_irq_disable_direct)
+	ret
+	ENDPROC(xen_irq_disable_direct)
+	RELOC(xen_irq_disable_direct, 0)
+
+/*
+	(xen_)save_fl is used to get the current interrupt enable status.
+	Callers expect the status to be in X86_EFLAGS_IF, and other bits
+	may be set in the return value.  We take advantage of this by
+	making sure that X86_EFLAGS_IF has the right value (and other bits
+	in that byte are 0), but other bits in the return value are
+	undefined.  We need to toggle the state of the bit, because
+	Xen and x86 use opposite senses (mask vs enable).
+ */
+ENTRY(xen_save_fl_direct)
+	testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+	setz %ah
+	addb %ah,%ah
+ENDPATCH(xen_save_fl_direct)
+	ret
+	ENDPROC(xen_save_fl_direct)
+	RELOC(xen_save_fl_direct, 0)
+
+/*
+	In principle the caller should be passing us a value return
+	from xen_save_fl_direct, but for robustness sake we test only
+	the X86_EFLAGS_IF flag rather than the whole byte. After
+	setting the interrupt mask state, it checks for unmasked
+	pending events and enters the hypervisor to get them delivered
+	if so.
+ */
+ENTRY(xen_restore_fl_direct)
+	testb $X86_EFLAGS_IF>>8, %ah
+	setz PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask)
+	/* Preempt here doesn't matter because that will deal with
+	   any pending interrupts.  The pending check may end up being
+	   run on the wrong CPU, but that doesn't hurt. */
+
+	/* check for unmasked and pending */
+	cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending)
+	jz 1f
+2:	call check_events
+1:
+ENDPATCH(xen_restore_fl_direct)
+	ret
+	ENDPROC(xen_restore_fl_direct)
+	RELOC(xen_restore_fl_direct, 2b+1)
+
+
+/*
+	Force an event check by making a hypercall,
+	but preserve regs before making the call.
+ */
+check_events:
+	push %rax
+	push %rcx
+	push %rdx
+	push %rsi
+	push %rdi
+	push %r8
+	push %r9
+	push %r10
+	push %r11
+	call force_evtchn_callback
+	pop %r11
+	pop %r10
+	pop %r9
+	pop %r8
+	pop %rdi
+	pop %rsi
+	pop %rdx
+	pop %rcx
+	pop %rax
+	ret
+#endif
+
+ENTRY(xen_adjust_exception_frame)
+	mov 8+0(%rsp),%rcx
+	mov 8+8(%rsp),%r11
+	ret $16
+
+hypercall_iret = hypercall_page + __HYPERVISOR_iret * 32
+/*
+	Xen64 iret frame:
+
+	ss
+	rsp
+	rflags
+	cs
+	rip		<-- standard iret frame
+
+	flags
+
+	rcx		}
+	r11		}<-- pushed by hypercall page
+rsp ->	rax		}
+ */
+ENTRY(xen_iret)
+	pushq $0
+1:	jmp hypercall_iret
+ENDPATCH(xen_iret)
+RELOC(xen_iret, 1b+1)
+
+/*
+	sysexit is not used for 64-bit processes, so it's
+	only ever used to return to 32-bit compat userspace.
+ */
+ENTRY(xen_sysexit)
+	pushq $__USER32_DS
+	pushq %rcx
+	pushq $X86_EFLAGS_IF
+	pushq $__USER32_CS
+	pushq %rdx
+
+	pushq $0
+1:	jmp hypercall_iret
+ENDPATCH(xen_sysexit)
+RELOC(xen_sysexit, 1b+1)
+
+ENTRY(xen_sysret64)
+	/* We're already on the usermode stack at this point, but still
+	   with the kernel gs, so we can easily switch back */
+	movq %rsp, %gs:pda_oldrsp
+	movq %gs:pda_kernelstack,%rsp
+
+	pushq $__USER_DS
+	pushq %gs:pda_oldrsp
+	pushq %r11
+	pushq $__USER_CS
+	pushq %rcx
+
+	pushq $VGCF_in_syscall
+1:	jmp hypercall_iret
+ENDPATCH(xen_sysret64)
+RELOC(xen_sysret64, 1b+1)
+
+ENTRY(xen_sysret32)
+	/* We're already on the usermode stack at this point, but still
+	   with the kernel gs, so we can easily switch back */
+	movq %rsp, %gs:pda_oldrsp
+	movq %gs:pda_kernelstack, %rsp
+
+	pushq $__USER32_DS
+	pushq %gs:pda_oldrsp
+	pushq %r11
+	pushq $__USER32_CS
+	pushq %rcx
+
+	pushq $VGCF_in_syscall
+1:	jmp hypercall_iret
+ENDPATCH(xen_sysret32)
+RELOC(xen_sysret32, 1b+1)
+
+/*
+	Xen handles syscall callbacks much like ordinary exceptions,
+	which means we have:
+	 - kernel gs
+	 - kernel rsp
+	 - an iret-like stack frame on the stack (including rcx and r11):
+		ss
+		rsp
+		rflags
+		cs
+		rip
+		r11
+	rsp->	rcx
+
+	In all the entrypoints, we undo all that to make it look
+	like a CPU-generated syscall/sysenter and jump to the normal
+	entrypoint.
+ */
+
+.macro undo_xen_syscall
+	mov 0*8(%rsp),%rcx
+	mov 1*8(%rsp),%r11
+	mov 5*8(%rsp),%rsp
+.endm
+
+/* Normal 64-bit system call target */
+ENTRY(xen_syscall_target)
+	undo_xen_syscall
+	jmp system_call_after_swapgs
+ENDPROC(xen_syscall_target)
+
+#ifdef CONFIG_IA32_EMULATION
+
+/* 32-bit compat syscall target */
+ENTRY(xen_syscall32_target)
+	undo_xen_syscall
+	jmp ia32_cstar_target
+ENDPROC(xen_syscall32_target)
+
+/* 32-bit compat sysenter target */
+ENTRY(xen_sysenter_target)
+	undo_xen_syscall
+	jmp ia32_sysenter_target
+ENDPROC(xen_sysenter_target)
+
+#else /* !CONFIG_IA32_EMULATION */
+
+ENTRY(xen_syscall32_target)
+ENTRY(xen_sysenter_target)
+	lea 16(%rsp), %rsp	/* strip %rcx,%r11 */
+	mov $-ENOSYS, %rax
+	pushq $VGCF_in_syscall
+	jmp hypercall_iret
+ENDPROC(xen_syscall32_target)
+ENDPROC(xen_sysenter_target)
+
+#endif	/* CONFIG_IA32_EMULATION */
diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S
index 7c0cf6320a0a..63d49a523ed3 100644
--- a/arch/x86/xen/xen-head.S
+++ b/arch/x86/xen/xen-head.S
@@ -5,15 +5,24 @@
 
 #include <linux/elfnote.h>
 #include <linux/init.h>
+
 #include <asm/boot.h>
+#include <asm/asm.h>
+#include <asm/page.h>
+
 #include <xen/interface/elfnote.h>
 #include <asm/xen/interface.h>
 
 	__INIT
 ENTRY(startup_xen)
-	movl %esi,xen_start_info
 	cld
-	movl $(init_thread_union+THREAD_SIZE),%esp
+#ifdef CONFIG_X86_32
+	mov %esi,xen_start_info
+	mov $init_thread_union+THREAD_SIZE,%esp
+#else
+	mov %rsi,xen_start_info
+	mov $init_thread_union+THREAD_SIZE,%rsp
+#endif
 	jmp xen_start_kernel
 
 	__FINIT
@@ -21,21 +30,26 @@ ENTRY(startup_xen)
 .pushsection .text
 	.align PAGE_SIZE_asm
 ENTRY(hypercall_page)
-	.skip 0x1000
+	.skip PAGE_SIZE_asm
 .popsection
 
 	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS,       .asciz "linux")
 	ELFNOTE(Xen, XEN_ELFNOTE_GUEST_VERSION,  .asciz "2.6")
 	ELFNOTE(Xen, XEN_ELFNOTE_XEN_VERSION,    .asciz "xen-3.0")
-	ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE,      .long  __PAGE_OFFSET)
-	ELFNOTE(Xen, XEN_ELFNOTE_ENTRY,          .long  startup_xen)
-	ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, .long  hypercall_page)
+#ifdef CONFIG_X86_32
+	ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE,      _ASM_PTR __PAGE_OFFSET)
+#else
+	ELFNOTE(Xen, XEN_ELFNOTE_VIRT_BASE,      _ASM_PTR __START_KERNEL_map)
+#endif
+	ELFNOTE(Xen, XEN_ELFNOTE_ENTRY,          _ASM_PTR startup_xen)
+	ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, _ASM_PTR hypercall_page)
 	ELFNOTE(Xen, XEN_ELFNOTE_FEATURES,       .asciz "!writable_page_tables|pae_pgdir_above_4gb")
 	ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE,       .asciz "yes")
 	ELFNOTE(Xen, XEN_ELFNOTE_LOADER,         .asciz "generic")
 	ELFNOTE(Xen, XEN_ELFNOTE_L1_MFN_VALID,
 		.quad _PAGE_PRESENT; .quad _PAGE_PRESENT)
 	ELFNOTE(Xen, XEN_ELFNOTE_SUSPEND_CANCEL, .long 1)
-	ELFNOTE(Xen, XEN_ELFNOTE_HV_START_LOW,   .long __HYPERVISOR_VIRT_START)
+	ELFNOTE(Xen, XEN_ELFNOTE_HV_START_LOW,   _ASM_PTR __HYPERVISOR_VIRT_START)
+	ELFNOTE(Xen, XEN_ELFNOTE_PADDR_OFFSET,   _ASM_PTR 0)
 
 #endif /*CONFIG_XEN */
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index d852ddbb3448..dd3c23152a2e 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -26,6 +26,7 @@ char * __init xen_memory_setup(void);
 void __init xen_arch_setup(void);
 void __init xen_init_IRQ(void);
 void xen_enable_sysenter(void);
+void xen_enable_syscall(void);
 void xen_vcpu_restore(void);
 
 void __init xen_build_dynamic_phys_to_machine(void);
@@ -37,7 +38,6 @@ void __init xen_time_init(void);
 unsigned long xen_get_wallclock(void);
 int xen_set_wallclock(unsigned long time);
 unsigned long long xen_sched_clock(void);
-void xen_timer_resume(void);
 
 irqreturn_t xen_debug_interrupt(int irq, void *dev_id);
 
@@ -45,25 +45,15 @@ bool xen_vcpu_stolen(int vcpu);
 
 void xen_mark_init_mm_pinned(void);
 
-void __init xen_fill_possible_map(void);
-
 void __init xen_setup_vcpu_info_placement(void);
-void xen_smp_prepare_boot_cpu(void);
-void xen_smp_prepare_cpus(unsigned int max_cpus);
-int xen_cpu_up(unsigned int cpu);
-void xen_smp_cpus_done(unsigned int max_cpus);
-
-void xen_smp_send_stop(void);
-void xen_smp_send_reschedule(int cpu);
-int xen_smp_call_function (void (*func) (void *info), void *info, int nonatomic,
-			   int wait);
-int xen_smp_call_function_single(int cpu, void (*func) (void *info), void *info,
-				 int nonatomic, int wait);
 
-int xen_smp_call_function_mask(cpumask_t mask, void (*func)(void *),
-			       void *info, int wait);
+#ifdef CONFIG_SMP
+void xen_smp_init(void);
 
 extern cpumask_t xen_cpu_initialized_map;
+#else
+static inline void xen_smp_init(void) {}
+#endif
 
 
 /* Declare an asm function, along with symbols needed to make it
@@ -78,7 +68,11 @@ DECL_ASM(void, xen_irq_disable_direct, void);
 DECL_ASM(unsigned long, xen_save_fl_direct, void);
 DECL_ASM(void, xen_restore_fl_direct, unsigned long);
 
+/* These are not functions, and cannot be called normally */
 void xen_iret(void);
 void xen_sysexit(void);
+void xen_sysret32(void);
+void xen_sysret64(void);
+void xen_adjust_exception_frame(void);
 
 #endif /* XEN_OPS_H */
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 9fc8551a1cf6..02e417d3d8e9 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -194,8 +194,8 @@ config HOTPLUG
 	plugged into slots found on all modern laptop computers.  Another
 	example, used on modern desktops as well as laptops, is USB.
 
-	Enable HOTPLUG and KMOD, and build a modular kernel.  Get agent
-	software (at <http://linux-hotplug.sourceforge.net/>) and install it.
+	Enable HOTPLUG and build a modular kernel.  Get agent software
+	(from <http://linux-hotplug.sourceforge.net/>) and install it.
 	Then your kernel will automatically call out to a user mode "policy
 	agent" (/sbin/hotplug) to load modules and set up software needed
 	to use devices as you hotplug them.
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 5e6d75c9f92b..a00359e8f7a8 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -16,6 +16,7 @@
 
 #include <linux/errno.h>
 #include <linux/init.h>
+#include <linux/mm.h>
 #include <linux/proc_fs.h>
 #include <linux/screen_info.h>
 #include <linux/bootmem.h>
diff --git a/arch/xtensa/kernel/syscall.c b/arch/xtensa/kernel/syscall.c
index f3e16efcd47a..ac15ecbdf919 100644
--- a/arch/xtensa/kernel/syscall.c
+++ b/arch/xtensa/kernel/syscall.c
@@ -49,7 +49,7 @@ asmlinkage long xtensa_pipe(int __user *userfds)
 	int fd[2];
 	int error;
 
-	error = do_pipe(fd);
+	error = do_pipe_flags(fd, 0);
 	if (!error) {
 		if (copy_to_user(userfds, fd, 2 * sizeof(int)))
 			error = -EFAULT;
diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c
index 6e52cdd6166f..c9a7c5b74a0d 100644
--- a/arch/xtensa/kernel/xtensa_ksyms.c
+++ b/arch/xtensa/kernel/xtensa_ksyms.c
@@ -18,7 +18,6 @@
 #include <linux/interrupt.h>
 #include <asm/irq.h>
 #include <linux/in6.h>
-#include <linux/ide.h>
 
 #include <asm/uaccess.h>
 #include <asm/checksum.h>
diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c
index 81d0560eaea2..34163cfaaffc 100644
--- a/arch/xtensa/mm/init.c
+++ b/arch/xtensa/mm/init.c
@@ -280,36 +280,9 @@ void free_initmem(void)
 	       (&__init_end - &__init_begin) >> 10);
 }
 
-void show_mem(void)
-{
-	int i, free = 0, total = 0, reserved = 0;
-	int shared = 0, cached = 0;
-
-	printk("Mem-info:\n");
-	show_free_areas();
-	printk("Free swap:       %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10));
-	i = max_mapnr;
-	while (i-- > 0) {
-		total++;
-		if (PageReserved(mem_map+i))
-			reserved++;
-		else if (PageSwapCache(mem_map+i))
-			cached++;
-		else if (!page_count(mem_map + i))
-			free++;
-		else
-			shared += page_count(mem_map + i) - 1;
-	}
-	printk("%d pages of RAM\n", total);
-	printk("%d reserved pages\n", reserved);
-	printk("%d pages shared\n", shared);
-	printk("%d pages swap cached\n",cached);
-	printk("%d free pages\n", free);
-}
-
 struct kmem_cache *pgtable_cache __read_mostly;
 
-static void pgd_ctor(struct kmem_cache *cache, void* addr)
+static void pgd_ctor(void* addr)
 {
 	pte_t* ptep = (pte_t*)addr;
 	int i;